This is manual.info, produced by makeinfo version 4.8 from manual.texi.

START-INFO-DIR-ENTRY
* mysql: (mysql).               MySQL documentation.
END-INFO-DIR-ENTRY


File: manual.info,  Node: Top,  Next: preface,  Prev: (dir),  Up: (dir)

* Menu:

* preface::                      Preface and Legal Notices
* introduction::                 General Information
* installing::                   Installing and Upgrading MySQL
* tutorial::                     Tutorial
* programs::                     MySQL Programs
* server-administration::        MySQL Server Administration
* security::                     Security
* backup-and-recovery::          Backup and Recovery
* optimization::                 Optimization
* language-structure::           Language Structure
* globalization::                Globalization
* data-types::                   Data Types
* functions::                    Functions and Operators
* sql-syntax::                   SQL Statement Syntax
* storage-engines::              Storage Engines
* ha-overview::                  High Availability and Scalability
* replication::                  Replication
* mysql-cluster::                MySQL Cluster NDB 7.2
* partitioning::                 Partitioning
* stored-programs-views::        Stored Programs and Views
* information-schema::           `INFORMATION_SCHEMA' Tables
* performance-schema::           MySQL Performance Schema
* connectors-apis::              Connectors and APIs
* extending-mysql::              Extending MySQL
* mysql-enterprise::             MySQL Enterprise Edition
* workbench::                    MySQL Workbench
* mysql-for-excel::              MySQL for Excel
* licenses-third-party::         Licenses for Third-Party Components
* faqs::                         MySQL 5.5 Frequently Asked Questions
* error-handling::               Errors, Error Codes, and Common Problems
* news::                         MySQL Release Notes
* restrictions::                 Restrictions and Limits
* glossary::                     MySQL Glossary


File: manual.info,  Node: preface,  Next: introduction,  Prev: Top,  Up: Top

Preface and Legal Notices
*************************

This is the Reference Manual for the MySQL Database System, version
5.5, through release 5.5.35. Differences between minor versions of
MySQL 5.5 are noted in the present text with reference to release
numbers (5.5.X). For license information, see the Legal Notices. This
product may contain third-party code. For license information on
third-party code, see *Note licenses-third-party::.

This manual is not intended for use with older versions of the MySQL
software due to the many functional and other differences between MySQL
5.5 and previous versions. If you are using an earlier release of the
MySQL software, please refer to the appropriate manual. For example,
`MySQL 5.1 Reference Manual' (http://dev.mysql.com/doc/refman/5.1/en/)
covers the 5.1 series of MySQL software releases.

If you are using MySQL 5.6, please refer to the `MySQL 5.6 Reference
Manual' (http://dev.mysql.com/doc/refman/5.6/en/).

*Legal Notices*

Copyright (C) 1997, 2013, Oracle and/or its affiliates. All rights
reserved.

This software and related documentation are provided under a license
agreement containing restrictions on use and disclosure and are
protected by intellectual property laws. Except as expressly permitted
in your license agreement or allowed by law, you may not use, copy,
reproduce, translate, broadcast, modify, license, transmit, distribute,
exhibit, perform, publish, or display any part, in any form, or by any
means. Reverse engineering, disassembly, or decompilation of this
software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice
and is not warranted to be error-free. If you find any errors, please
report them to us in writing.

If this software or related documentation is delivered to the U.S.
Government or anyone licensing it on behalf of the U.S. Government, the
following notice is applicable:

U.S. GOVERNMENT RIGHTS Programs, software, databases, and related
documentation and technical data delivered to U.S. Government customers
are "commercial computer software" or "commercial technical data"
pursuant to the applicable Federal Acquisition Regulation and
agency-specific supplemental regulations. As such, the use,
duplication, disclosure, modification, and adaptation shall be subject
to the restrictions and license terms set forth in the applicable
Government contract, and, to the extent applicable by the terms of the
Government contract, the additional rights set forth in FAR 52.227-19,
Commercial Computer Software License (December 2007).  Oracle USA,
Inc., 500 Oracle Parkway, Redwood City, CA 94065.

This software is developed for general use in a variety of information
management applications. It is not developed or intended for use in any
inherently dangerous applications, including applications which may
create a risk of personal injury. If you use this software in dangerous
applications, then you shall be responsible to take all appropriate
fail-safe, backup, redundancy, and other measures to ensure the safe
use of this software. Oracle Corporation and its affiliates disclaim
any liability for any damages caused by use of this software in
dangerous applications.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. MySQL is a trademark of Oracle Corporation and/or its
affiliates, and shall not be used without Oracle's express written
authorization. Other names may be trademarks of their respective owners.

This software and documentation may provide access to or information on
content, products, and services from third parties. Oracle Corporation
and its affiliates are not responsible for and expressly disclaim all
warranties of any kind with respect to third-party content, products,
and services. Oracle Corporation and its affiliates will not be
responsible for any loss, costs, or damages incurred due to your access
to or use of third-party content, products, or services.

This document in any form, software or printed matter, contains
proprietary information that is the exclusive property of Oracle.  Your
access to and use of this material is subject to the terms and
conditions of your Oracle Software License and Service Agreement, which
has been executed and with which you agree to comply. This document and
information contained herein may not be disclosed, copied, reproduced,
or distributed to anyone outside Oracle without prior written consent
of Oracle or as specifically provided below.  This document is not part
of your license agreement nor can it be incorporated into any
contractual agreement with Oracle or its subsidiaries or affiliates.

This documentation is NOT distributed under a GPL license. Use of this
documentation is subject to the following terms:

You may create a printed copy of this documentation solely for your own
personal use. Conversion to other formats is allowed as long as the
actual content is not altered or edited in any way. You shall not
publish or distribute this documentation in any form or on any media,
except if you distribute the documentation in a manner similar to how
Oracle disseminates it (that is, electronically for download on a Web
site with the software) or on a CD-ROM or similar medium, provided
however that the documentation is disseminated together with the
software on the same medium. Any other use, such as any dissemination
of printed copies or use of this documentation, in whole or in part, in
another publication, requires the prior written consent from an
authorized representative of Oracle. Oracle and/or its affiliates
reserve any and all rights to this documentation not expressly granted
above.

For more information on the terms of this license, or for details on
how the MySQL documentation is built and produced, please visit MySQL
Contact & Questions (http://dev.mysql.com/contact/).

For additional licensing information, including licenses for
third-party libraries used by MySQL products, see *Note Top::.

For help with using MySQL, please visit either the MySQL Forums
(http://forums.mysql.com) or MySQL Mailing Lists
(http://lists.mysql.com) where you can discuss your issues with other
MySQL users.

For additional documentation on MySQL products, including translations
of the documentation into other languages, and downloadable versions in
variety of formats, including HTML and PDF formats, see the MySQL
Documentation Library (http://dev.mysql.com/doc).


File: manual.info,  Node: introduction,  Next: installing,  Prev: preface,  Up: Top

1 General Information
*********************

* Menu:

* manual-info::                  About This Manual
* manual-conventions::           Typographical and Syntax Conventions
* what-is::                      Overview of the MySQL Database Management System
* mysql-nutshell::               What Is New in MySQL 5.5
* development-history::          MySQL Development History
* information-sources::          MySQL Information Sources
* bug-reports::                  How to Report Bugs or Problems
* compatibility::                MySQL Standards Compliance
* credits::                      Credits

The MySQL(tm) software delivers a very fast, multi-threaded,
multi-user, and robust SQL (Structured Query Language) database server.
MySQL Server is intended for mission-critical, heavy-load production
systems as well as for embedding into mass-deployed software. Oracle is
a registered trademark of Oracle Corporation and/or its affiliates.
MySQL is a trademark of Oracle Corporation and/or its affiliates, and
shall not be used by Customer without Oracle's express written
authorization. Other names may be trademarks of their respective owners.

The MySQL software is Dual Licensed. Users can choose to use the MySQL
software as an Open Source product under the terms of the GNU General
Public License (`http://www.fsf.org/licenses/') or can purchase a
standard commercial license from Oracle. See
http://www.mysql.com/company/legal/licensing/ for more information on
our licensing policies.

The following list describes some sections of particular interest in
this manual:

   * For a discussion of MySQL Database Server capabilities, see *Note
     features::.

   * For an overview of new MySQL features, see *Note mysql-nutshell::.
     For information about the changes in each version, see the Release
     Notes (http://dev.mysql.com/doc/relnotes/mysql/5.5/en/).

   * For installation instructions, see *Note installing::.  For
     information about upgrading MySQL, see *Note upgrading::.

   * For a tutorial introduction to the MySQL Database Server, see
     *Note tutorial::.

   * For information about configuring and administering MySQL Server,
     see *Note server-administration::.

   * For information about security in MySQL, see *Note security::.

   * For information about setting up replication servers, see *Note
     replication::.

   * For information about MySQL Enterprise, the commercial MySQL
     release with advanced features and management tools, see *Note
     mysql-enterprise::.

   * For answers to a number of questions that are often asked
     concerning the MySQL Database Server and its capabilities, see
     *Note faqs::.

   * For a history of new features and bugfixes, see the Release Notes
     (http://dev.mysql.com/doc/relnotes/mysql/5.5/en/).

*Important*:

To report problems or bugs, please use the instructions at *Note
bug-reports::. If you find a sensitive security bug in MySQL Server,
please let us know immediately by sending an email message to
<secalert_us@oracle.com>. Exception: Support customers should report
all problems, including security bugs, to Oracle Support.


File: manual.info,  Node: manual-info,  Next: manual-conventions,  Prev: introduction,  Up: introduction

1.1 About This Manual
=====================

This is the Reference Manual for the MySQL Database System, version
5.5, through release 5.5.35.  Differences between minor versions of
MySQL 5.5 are noted in the present text with reference to release
numbers (5.5.X). For license information, see the Legal Notices. This
product may contain third-party code. For license information on
third-party code, see *Note licenses-third-party::.

This manual is not intended for use with older versions of the MySQL
software due to the many functional and other differences between MySQL
5.5 and previous versions. If you are using an earlier release of the
MySQL software, please refer to the appropriate manual. For example,
`MySQL 5.1 Reference Manual' (http://dev.mysql.com/doc/refman/5.1/en/)
covers the 5.1 series of MySQL software releases.

If you are using MySQL 5.6, please refer to the `MySQL 5.6 Reference
Manual' (http://dev.mysql.com/doc/refman/5.6/en/).

Because this manual serves as a reference, it does not provide general
instruction on SQL or relational database concepts. It also does not
teach you how to use your operating system or command-line interpreter.

The MySQL Database Software is under constant development, and the
Reference Manual is updated frequently as well. The most recent version
of the manual is available online in searchable form at
`http://dev.mysql.com/doc/'. Other formats also are available there,
including HTML, PDF, and EPUB versions.

The Reference Manual source files are written in DocBook XML format.
The HTML version and other formats are produced automatically,
primarily using the DocBook XSL stylesheets. For information about
DocBook, see `http://docbook.org/'

If you have questions about using MySQL, you can ask them using our
mailing lists or forums. See *Note mailing-lists::, and *Note forums::.
If you have suggestions concerning additions or corrections to the
manual itself, please send them to the
http://www.mysql.com/company/contact/.

This manual was originally written by David Axmark and Michael `Monty'
Widenius. It is maintained by the MySQL Documentation Team, consisting
of Paul DuBois, Stefan Hinz, Philip Olson, Daniel Price, Daniel So, and
Jon Stephens.


File: manual.info,  Node: manual-conventions,  Next: what-is,  Prev: manual-info,  Up: introduction

1.2 Typographical and Syntax Conventions
========================================

This manual uses certain typographical conventions:

   * `Text in this style' is used for SQL statements; database, table,
     and column names; program listings and source code; and
     environment variables. Example: `To reload the grant tables, use
     the *Note `FLUSH PRIVILEGES': flush. statement.'

   * Text in this style indicates input that you type in examples.

   * `Text in this style' indicates the names of executable programs
     and scripts, examples being *Note `mysql': mysql. (the MySQL
     command-line client program) and *Note `mysqld': mysqld. (the
     MySQL server executable).

   * TEXT IN THIS STYLE is used for variable input for which you should
     substitute a value of your own choosing.

   * _Text in this style_ is used for emphasis.

   * *Text in this style* is used in table headings and to convey
     especially strong emphasis.

   * `Text in this style' is used to indicate a program option that
     affects how the program is executed, or that supplies information
     that is needed for the program to function in a certain way.
     _Example_: `The `--host' option (short form `-h') tells the *Note
     `mysql': mysql. client program the hostname or IP address of the
     MySQL server that it should connect to'.

   * File names and directory names are written like this: `The global
     `my.cnf' file is located in the `/etc' directory.'

   * Character sequences are written like this: `To specify a wildcard,
     use the ``%'' character.'

When commands are shown that are meant to be executed from within a
particular program, the prompt shown preceding the command indicates
which command to use. For example, `shell>' indicates a command that
you execute from your login shell, `root-shell>' is similar but should
be executed as `root', and `mysql>' indicates a statement that you
execute from the *Note `mysql': mysql. client program:

     shell> type a shell command here
     root-shell> type a shell command as ROOT here
     mysql> type a mysql statement here

In some areas different systems may be distinguished from each other to
show that commands should be executed in two different environments.
For example, while working with replication the commands might be
prefixed with `master' and `slave':

     master> type a mysql command on the replication master here
     slave> type a mysql command on the replication slave here

The `shell' is your command interpreter. On Unix, this is typically a
program such as `sh', `csh', or `bash'. On Windows, the equivalent
program is `command.com' or `cmd.exe', typically run in a console
window.

When you enter a command or statement shown in an example, do not type
the prompt shown in the example.

Database, table, and column names must often be substituted into
statements. To indicate that such substitution is necessary, this
manual uses DB_NAME, TBL_NAME, and COL_NAME. For example, you might see
a statement like this:

     mysql> SELECT COL_NAME FROM DB_NAME.TBL_NAME;

This means that if you were to enter a similar statement, you would
supply your own database, table, and column names, perhaps like this:

     mysql> SELECT author_name FROM biblio_db.author_list;

SQL keywords are not case sensitive and may be written in any
lettercase. This manual uses uppercase.

In syntax descriptions, square brackets (``['' and ``]'') indicate
optional words or clauses. For example, in the following statement, `IF
EXISTS' is optional:

     DROP TABLE [IF EXISTS] TBL_NAME

When a syntax element consists of a number of alternatives, the
alternatives are separated by vertical bars (``|''). When one member
from a set of choices _may_ be chosen, the alternatives are listed
within square brackets (``['' and ``]''):

     TRIM([[BOTH | LEADING | TRAILING] [REMSTR] FROM] STR)

When one member from a set of choices _must_ be chosen, the
alternatives are listed within braces (``{'' and ``}''):

     {DESCRIBE | DESC} TBL_NAME [COL_NAME | WILD]

An ellipsis (`...') indicates the omission of a section of a statement,
typically to provide a shorter version of more complex syntax. For
example, *Note `SELECT ... INTO OUTFILE': select. is shorthand for the
form of *Note `SELECT': select. statement that has an `INTO OUTFILE'
clause following other parts of the statement.

An ellipsis can also indicate that the preceding syntax element of a
statement may be repeated. In the following example, multiple
RESET_OPTION values may be given, with each of those after the first
preceded by commas:

     RESET RESET_OPTION [,RESET_OPTION] ...

Commands for setting shell variables are shown using Bourne shell
syntax. For example, the sequence to set the `CC' environment variable
and run the `configure' command looks like this in Bourne shell syntax:

     shell> CC=gcc ./configure

If you are using `csh' or `tcsh', you must issue commands somewhat
differently:

     shell> setenv CC gcc
     shell> ./configure


File: manual.info,  Node: what-is,  Next: mysql-nutshell,  Prev: manual-conventions,  Up: introduction

1.3 Overview of the MySQL Database Management System
====================================================

* Menu:

* what-is-mysql::                What is MySQL?
* features::                     The Main Features of MySQL
* history::                      History of MySQL


File: manual.info,  Node: what-is-mysql,  Next: features,  Prev: what-is,  Up: what-is

1.3.1 What is MySQL?
--------------------

MySQL, the most popular Open Source SQL database management system, is
developed, distributed, and supported by Oracle Corporation.

The MySQL Web site (http://www.mysql.com/) provides the latest
information about MySQL software.

   * *MySQL is a database management system.*

     A database is a structured collection of data. It may be anything
     from a simple shopping list to a picture gallery or the vast
     amounts of information in a corporate network. To add, access, and
     process data stored in a computer database, you need a database
     management system such as MySQL Server.  Since computers are very
     good at handling large amounts of data, database management
     systems play a central role in computing, as standalone utilities,
     or as parts of other applications.

   * *MySQL databases are relational.*

     A relational database stores data in separate tables rather than
     putting all the data in one big storeroom. The database structures
     are organized into physical files optimized for speed. The logical
     model, with objects such as databases, tables, views, rows, and
     columns, offers a flexible programming environment. You set up
     rules governing the relationships between different data fields,
     such as one-to-one, one-to-many, unique, required or optional, and
     `pointers' between different tables. The database enforces these
     rules, so that with a well-designed database, your application
     never sees inconsistent, duplicate, orphan, out-of-date, or
     missing data.

     The SQL part of `MySQL' stands for `Structured Query Language'.
     SQL is the most common standardized language used to access
     databases.  Depending on your programming environment, you might
     enter SQL directly (for example, to generate reports), embed SQL
     statements into code written in another language, or use a
     language-specific API that hides the SQL syntax.

     SQL is defined by the ANSI/ISO SQL Standard. The SQL standard has
     been evolving since 1986 and several versions exist. In this
     manual, `SQL-92' refers to the standard released in 1992,
     `SQL:1999' refers to the standard released in 1999, and `SQL:2003'
     refers to the current version of the standard. We use the phrase
     `the SQL standard' to mean the current version of the SQL Standard
     at any time.

   * *MySQL software is Open Source.*

     Open Source means that it is possible for anyone to use and modify
     the software. Anybody can download the MySQL software from the
     Internet and use it without paying anything. If you wish, you may
     study the source code and change it to suit your needs. The MySQL
     software uses the GPL (GNU General Public License),
     `http://www.fsf.org/licenses/', to define what you may and may not
     do with the software in different situations. If you feel
     uncomfortable with the GPL or need to embed MySQL code into a
     commercial application, you can buy a commercially licensed
     version from us. See the MySQL Licensing Overview for more
     information (http://www.mysql.com/company/legal/licensing/).

   * *The MySQL Database Server is very fast, reliable, scalable, and
     easy to use.*

     If that is what you are looking for, you should give it a try.
     MySQL Server can run comfortably on a desktop or laptop, alongside
     your other applications, web servers, and so on, requiring little
     or no attention. If you dedicate an entire machine to MySQL, you
     can adjust the settings to take advantage of all the memory, CPU
     power, and I/O capacity available. MySQL can also scale up to
     clusters of machines, networked together.

     You can find a performance comparison of MySQL Server with other
     database managers on our benchmark page. See *Note
     mysql-benchmarks::.

     MySQL Server was originally developed to handle large databases
     much faster than existing solutions and has been successfully used
     in highly demanding production environments for several years.
     Although under constant development, MySQL Server today offers a
     rich and useful set of functions. Its connectivity, speed, and
     security make MySQL Server highly suited for accessing databases
     on the Internet.

   * *MySQL Server works in client/server or embedded systems.*

     The MySQL Database Software is a client/server system that
     consists of a multi-threaded SQL server that supports different
     backends, several different client programs and libraries,
     administrative tools, and a wide range of application programming
     interfaces (APIs).

     We also provide MySQL Server as an embedded multi-threaded library
     that you can link into your application to get a smaller, faster,
     easier-to-manage standalone product.

   * *A large amount of contributed MySQL software is available.*

     MySQL Server has a practical set of features developed in close
     cooperation with our users. It is very likely that your favorite
     application or language supports the MySQL Database Server.

The official way to pronounce `MySQL' is `My Ess Que Ell' (not `my
sequel'), but we do not mind if you pronounce it as `my sequel' or in
some other localized way.


File: manual.info,  Node: features,  Next: history,  Prev: what-is-mysql,  Up: what-is

1.3.2 The Main Features of MySQL
--------------------------------

This section describes some of the important characteristics of the
MySQL Database Software. See also *Note development-history::. In most
respects, the roadmap applies to all versions of MySQL. For information
about features as they are introduced into MySQL on a series-specific
basis, see the `In a Nutshell' section of the appropriate Manual:

   * MySQL 5.6: MySQL 5.6 in a Nutshell
     (http://dev.mysql.com/doc/refman/5.6/en/mysql-nutshell.html)

   * MySQL 5.5: MySQL 5.5 in a Nutshell
     (http://dev.mysql.com/doc/refman/5.5/en/mysql-nutshell.html)

   * MySQL 5.1: MySQL 5.1 in a Nutshell
     (http://dev.mysql.com/doc/refman/5.1/en/mysql-nutshell.html)

   * MySQL 5.0: MySQL 5.0 in a Nutshell
     (http://dev.mysql.com/doc/refman/5.0/en/mysql-nutshell.html)

* Internals and Portability: *

   * Written in C and C++.

   * Tested with a broad range of different compilers.

   * Works on many different platforms. See *Note supported-os::.

   * For portability, uses `CMake' in MySQL 5.5 and up. Previous series
     use GNU Automake, Autoconf, and Libtool.

   * Tested with Purify (a commercial memory leakage detector) as well
     as with Valgrind, a GPL tool
     (`http://developer.kde.org/~sewardj/').

   * Uses multi-layered server design with independent modules.

   * Designed to be fully multi-threaded using kernel threads, to
     easily use multiple CPUs if they are available.

   * Provides transactional and nontransactional storage engines.

   * Uses very fast B-tree disk tables (`MyISAM') with index
     compression.

   * Designed to make it relatively easy to add other storage engines.
     This is useful if you want to provide an SQL interface for an
     in-house database.

   * Uses a very fast thread-based memory allocation system.

   * Executes very fast joins using an optimized nested-loop join.

   * Implements in-memory hash tables, which are used as temporary
     tables.

   * Implements SQL functions using a highly optimized class library
     that should be as fast as possible. Usually there is no memory
     allocation at all after query initialization.

   * Provides the server as a separate program for use in a
     client/server networked environment, and as a library that can be
     embedded (linked) into standalone applications. Such applications
     can be used in isolation or in environments where no network is
     available.

* Data Types: *

   * Many data types: signed/unsigned integers 1, 2, 3, 4, and 8 bytes
     long, *Note `FLOAT': floating-point-types, *Note `DOUBLE':
     floating-point-types, *Note `CHAR': char, *Note `VARCHAR': char,
     *Note `BINARY': binary-varbinary, *Note `VARBINARY':
     binary-varbinary, *Note `TEXT': blob, *Note `BLOB': blob, *Note
     `DATE': datetime, *Note `TIME': time, *Note `DATETIME': datetime,
     *Note `TIMESTAMP': datetime, *Note `YEAR': year, *Note `SET': set,
     *Note `ENUM': enum, and OpenGIS spatial types. See *Note
     data-types::.

   * Fixed-length and variable-length string types.

* Statements and Functions: *

   * Full operator and function support in the *Note `SELECT': select.
     list and `WHERE' clause of queries. For example:

          mysql> SELECT CONCAT(first_name, ' ', last_name)
              -> FROM citizen
              -> WHERE income/dependents > 10000 AND age > 30;

   * Full support for SQL `GROUP BY' and `ORDER BY' clauses. Support
     for group functions (`COUNT()', `AVG()', `STD()', `SUM()', `MAX()',
     `MIN()', and `GROUP_CONCAT()').

   * Support for `LEFT OUTER JOIN' and `RIGHT OUTER JOIN' with both
     standard SQL and ODBC syntax.

   * Support for aliases on tables and columns as required by standard
     SQL.

   * Support for *Note `DELETE': delete, *Note `INSERT': insert, *Note
     `REPLACE': replace, and *Note `UPDATE': update. to return the
     number of rows that were changed (affected), or to return the
     number of rows matched instead by setting a flag when connecting
     to the server.

   * Support for MySQL-specific *Note `SHOW': show.  statements that
     retrieve information about databases, storage engines, tables, and
     indexes. MySQL 5.0 adds support for the `INFORMATION_SCHEMA'
     database, implemented according to standard SQL.

   * An *Note `EXPLAIN': explain. statement to show how the optimizer
     resolves a query.

   * Independence of function names from table or column names. For
     example, `ABS' is a valid column name. The only restriction is
     that for a function call, no spaces are permitted between the
     function name and the ``('' that follows it. See *Note
     reserved-words::.

   * You can refer to tables from different databases in the same
     statement.

* Security: *

   * A privilege and password system that is very flexible and secure,
     and that enables host-based verification.

   * Password security by encryption of all password traffic when you
     connect to a server.

* Scalability and Limits: *

   * Support for large databases. We use MySQL Server with databases
     that contain 50 million records. We also know of users who use
     MySQL Server with 200,000 tables and about 5,000,000,000 rows.

   * Support for up to 64 indexes per table (32 before MySQL 4.1.2).
     Each index may consist of 1 to 16 columns or parts of columns. The
     maximum index width is 767 bytes for `InnoDB' tables, or 1000 for
     `MyISAM'; before MySQL 4.1.2, the limit is 500 bytes. An index may
     use a prefix of a column for *Note `CHAR': char, *Note `VARCHAR':
     char, *Note `BLOB': blob, or *Note `TEXT': blob. column types.

* Connectivity: *

   * Clients can connect to MySQL Server using several protocols:

        * Clients can connect using TCP/IP sockets on any platform.

        * On Windows systems in the NT family (NT, 2000, XP, 2003, or
          Vista), clients can connect using named pipes if the server
          is started with the `--enable-named-pipe' option.  In MySQL
          4.1 and higher, Windows servers also support shared-memory
          connections if started with the `--shared-memory' option.
          Clients can connect through shared memory by using the
          `--protocol=memory' option.

        * On Unix systems, clients can connect using Unix domain socket
          files.

   * MySQL client programs can be written in many languages. A client
     library written in C is available for clients written in C or C++,
     or for any language that provides C bindings.

   * APIs for C, C++, Eiffel, Java, Perl, PHP, Python, Ruby, and Tcl
     are available, enabling MySQL clients to be written in many
     languages. See *Note connectors-apis::.

   * The Connector/ODBC (MyODBC) interface provides MySQL support for
     client programs that use ODBC (Open Database Connectivity)
     connections. For example, you can use MS Access to connect to your
     MySQL server. Clients can be run on Windows or Unix.
     Connector/ODBC source is available. All ODBC 2.5 functions are
     supported, as are many others. See *Note connector-odbc::.

   * The Connector/J interface provides MySQL support for Java client
     programs that use JDBC connections. Clients can be run on Windows
     or Unix. Connector/J source is available. See *Note connector-j::.

   * MySQL Connector/Net enables developers to easily create .NET
     applications that require secure, high-performance data
     connectivity with MySQL. It implements the required ADO.NET
     interfaces and integrates into ADO.NET aware tools. Developers can
     build applications using their choice of .NET languages.  MySQL
     Connector/Net is a fully managed ADO.NET driver written in 100%
     pure C#. See *Note connector-net::.

* Localization: *

   * The server can provide error messages to clients in many
     languages. See *Note error-message-language::.

   * Full support for several different character sets, including
     `latin1' (cp1252), `german', `big5', `ujis', and more.  For
     example, the Scandinavian characters ``aa'', ``a"'' and ``o"'' are
     permitted in table and column names. Unicode support is available
     as of MySQL 4.1.

   * All data is saved in the chosen character set.

   * Sorting and comparisons are done according to the chosen character
     set and collation (using `latin1' and Swedish collation by
     default). It is possible to change this when the MySQL server is
     started. To see an example of very advanced sorting, look at the
     Czech sorting code. MySQL Server supports many different character
     sets that can be specified at compile time and runtime.

   * As of MySQL 4.1, the server time zone can be changed dynamically,
     and individual clients can specify their own time zone. *Note
     time-zone-support::.

* Clients and Tools: *

   * MySQL includes several client and utility programs. These include
     both command-line programs such as *Note `mysqldump': mysqldump.
     and *Note `mysqladmin': mysqladmin, and graphical programs such as
     *Note MySQL Workbench: workbench.

   * MySQL Server has built-in support for SQL statements to check,
     optimize, and repair tables. These statements are available from
     the command line through the *Note `mysqlcheck': mysqlcheck.
     client. MySQL also includes *Note `myisamchk': myisamchk, a very
     fast command-line utility for performing these operations on
     `MyISAM' tables. See *Note programs::.

   * MySQL programs can be invoked with the `--help' or `-?' option to
     obtain online assistance.


File: manual.info,  Node: history,  Prev: features,  Up: what-is

1.3.3 History of MySQL
----------------------

We started out with the intention of using the `mSQL' database system
to connect to our tables using our own fast low-level (ISAM) routines.
However, after some testing, we came to the conclusion that `mSQL' was
not fast enough or flexible enough for our needs. This resulted in a
new SQL interface to our database but with almost the same API
interface as `mSQL'. This API was designed to enable third-party code
that was written for use with `mSQL' to be ported easily for use with
MySQL.

MySQL is named after co-founder Monty Widenius's daughter, My.

The name of the MySQL Dolphin (our logo) is `Sakila,' which was chosen
from a huge list of names suggested by users in our `Name the Dolphin'
contest. The winning name was submitted by Ambrose Twebaze, an Open
Source software developer from Swaziland, Africa. According to Ambrose,
the feminine name Sakila has its roots in SiSwati, the local language
of Swaziland.  Sakila is also the name of a town in Arusha, Tanzania,
near Ambrose's country of origin, Uganda.


File: manual.info,  Node: mysql-nutshell,  Next: development-history,  Prev: what-is,  Up: introduction

1.4 What Is New in MySQL 5.5
============================

* Menu:

* smp-improvements::             Scalability Improvements
* innodb-io-changes::            `InnoDB' I/O Subsystem Changes
* monitoring-improvements::      Diagnostic and Monitoring Capabilities
* solaris-enhancements::         Enhanced Solaris Support

This section summarizes what has been added to and removed from MySQL
5.5.

* Added Features *

The following features have been added to MySQL 5.5:

   * MySQL Enterprise Thread Pool

     The default thread-handling model in MySQL Server executes
     statements using one thread per client connection. As more clients
     connect to the server and execute statements, overall performance
     degrades. As of MySQL 5.5.16, MySQL Enterprise Edition
     distributions include a thread pool plugin that provides an
     alternative thread-handling model designed to reduce overhead and
     improve performance. The plugin implements a thread pool that
     increases server performance by efficiently managing statement
     execution threads for large numbers of client connections. For more
     information, see *Note thread-pool-plugin::.

   * MySQL Enterprise Audit

     MySQL Enterprise Edition now includes MySQL Enterprise Audit,
     implemented using a server plugin named `audit_log'. MySQL
     Enterprise Audit uses the open MySQL Audit API to enable standard,
     policy-based monitoring and logging of connection and query
     activity executed on specific MySQL servers. Designed to meet the
     Oracle audit specification, MySQL Enterprise Audit provides an out
     of box, easy to use auditing and compliance solution for
     applications that are governed by both internal and external
     regulatory guidelines. When installed, the audit plugin enables
     MySQL Server to produce a log file containing an audit record of
     server activity. The log contents include when clients connect and
     disconnect, and what actions they perform while connected, such as
     which databases and tables they access. For more information, see
     *Note audit-log-plugin::.

   * Pluggable authentication

     MySQL authentication supports two new capabilities, pluggable
     authentication and proxy users. With pluggable authentication, the
     server can use plugins to authenticate incoming client
     connections, and clients can load an authentication plugin that
     interacts properly with the corresponding server plugin. This
     capability enables clients to connect to the MySQL server with
     credentials that are appropriate for authentication methods other
     than the built-in MySQL authentication based on native MySQL
     passwords stored in the `mysql.user' table.  For example, plugins
     can be created to use external authentication methods such as
     LDAP, Kerberos, PAM, or Windows login IDs. Proxy user capability
     enables a client who connects and authenticates as one user to be
     treated, for purposes of access control while connected, as having
     the privileges of a different user. In effect, one user
     impersonates another. Proxy capability depends on pluggable
     authentication because it is based on having an authentication
     plugin return to the server the user name that the connecting user
     impersonates. See *Note pluggable-authentication::, and *Note
     proxy-users::.

     As of MySQL 5.5.16, commercial distributions of MySQL include two
     plugins that enable MySQL Server to use external authentication
     methods to authenticate MySQL users:

        * PAM (Pluggable Authentication Modules) enables a system to
          access various kinds of authentication methods through a
          standard interface. A PAM authentication plugin enables MySQL
          Server to use PAM to authenticate MySQL users.

        * Distributions of MySQL for Windows include an authentication
          plugin that enables MySQL Server to use native Windows
          services to authenticate client connections. Users who have
          logged in to Windows can connect from MySQL client programs
          to the server based on the information in their environment
          without specifying an additional password.

     These authentication plugins enable MySQL Server to accept
     connections from users defined outside the MySQL grant tables.
     They also support the MySQL proxy-user capability. Each plugin can
     return to MySQL a user name different from the login user, which
     means that the plugin can return the MySQL user that defines the
     privileges the externally authenticated user should have.

     For more information, see *Note pam-authentication-plugin::, and
     *Note windows-authentication-plugin::.

   * Multi-core scalability

     Scalability on multi-core CPUs is improved. The trend in hardware
     development now is toward more cores rather than continued
     increases in CPU clock speeds, which renders `wait until CPUs get
     faster' a nonviable means of improving database performance.
     Instead, it is necessary to make better use of multiple cores to
     maximally exploit the processing cycles they make available. MySQL
     5.5 takes advantage of features of SMP systems and tries to
     eliminate bottlenecks in MySQL architecture that hinder full use
     of multiple cores. The focus has been on *Note `InnoDB':
     innodb-storage-engine, especially locking and memory management.
     See *Note smp-improvements::.

   * `InnoDB' I/O subsystem

     *Note `InnoDB': innodb-storage-engine. I/O subsystem changes
     enable more effective use of available I/O capacity. See *Note
     innodb-io-changes::.

   * Diagnostic improvements

     There is better access to execution and performance information.
     Diagnostic improvements include Performance Schema (a feature for
     monitoring MySQL Server execution at a low level), DTrace probes,
     expanded *Note `SHOW ENGINE INNODB STATUS': show-engine. output,
     Debug Sync, and a new status variable. See *Note
     monitoring-improvements::.

   * Solaris

     Several modifications improve operation of MySQL Server on
     Solaris. See *Note solaris-enhancements::.

   * Default storage engine

     The default storage engine for new tables is `InnoDB' rather than
     `MyISAM'. See *Note innodb-default-se::.

   * MySQL Cluster

     MySQL Cluster is released as a separate product, with new
     development for version 7.2 of the *Note `NDB': mysql-cluster.
     storage engine being based on MySQL 5.5. Clustering support is not
     available in mainline MySQL Server 5.5 releases. For more
     information about MySQL Cluster NDB 7.2, see *Note mysql-cluster::.

     MySQL Cluster releases are identified by a 3-part NDB version
     number. Currently, MySQL Cluster NDB 7.1 is the most recent GA
     release series. MySQL Cluster NDB 6.3 and MySQL Cluster NDB 7.0
     are also still available. These versions of MySQL Cluster are
     based on MySQL Server 5.1 and documented in the `MySQL 5.1
     Manual'. See MySQL Cluster NDB 6.1 - 7.1
     (http://dev.mysql.com/doc/refman/5.1/en/mysql-cluster.html).

   * Semisynchronous replication

     A commit performed on the master side blocks before returning to
     the session that performed the transaction until at least one
     slave acknowledges that it has received and logged the events for
     the transaction. Semisynchronous replication is implemented
     through an optional plugin component. See *Note
     replication-semisync::

   * Unicode

     Support for supplementary Unicode characters; that is, characters
     outside the Basic Multilingual Plane (BMP). These new Unicode
     character sets include supplementary characters: `utf16', `utf32',
     and `utf8mb4'. See *Note charset-unicode::.

   * Partitioning

     Enhancements to table partitioning:

        * Two new types of user-defined partitioning are supported:
          `RANGE COLUMNS' partitioning is an extension to `RANGE'
          partitioning; `LIST COLUMNS' partitioning is an extension to
          `LIST' partitioning. Each of these extensions provides two
          enhancements to MySQL partitioning capabilities:

             * It is possible to define partitioning ranges or lists
               based on *Note `DATE': datetime, *Note `DATETIME':
               datetime, or string values (such as *Note `CHAR': char.
               or *Note `VARCHAR': char.).

               You can also define ranges or lists based on multiple
               column values when partitioning tables by `RANGE
               COLUMNS' or `LIST COLUMNS', respectively. Such a range
               or list may refer to up to 16 columns.

             * For tables defined using these partitioning types,
               partition pruning can now optimize queries with `WHERE'
               conditions that use multiple comparisons between
               (different) column values and constants, such as `a = 10
               AND b > 5' or `a < "2005-11-25" AND b = 10 AND c = 50'.

          See *Note partitioning-range::, and *Note partitioning-list::.

        * It is now possible to delete all rows from one or more
          partitions of a partitioned table using the *Note `ALTER
          TABLE ... TRUNCATE PARTITION': alter-table. statement.
          Executing the statement deletes rows without affecting the
          structure of the table. The partitions named in the `TRUNCATE
          PARTITION' clause do not have to be contiguous.

        * Key caches are now supported for indexes on partitioned *Note
          `MyISAM': myisam-storage-engine. tables, using the *Note
          `CACHE INDEX': cache-index. and *Note `LOAD INDEX INTO
          CACHE': load-index. statements. In addition, a key cache can
          be defined for and loaded with indexes from an entire
          partitioned table, or for one or more partitions. In the
          latter case, the partitions are not required to be contiguous.

        * The new `TO_SECONDS()' function converts a date or datetime
          expression to a number of seconds since the year 0. This is a
          general-purpose function, but is useful for partitioning.
          You may use it in partitioning expressions, and partition
          pruning is supported for tables defined using such
          expressions.

   * `SIGNAL' and `RESIGNAL'

     Support for the SQL standard *Note `SIGNAL': signal. and *Note
     `RESIGNAL': resignal. statements. See *Note condition-handling::.

   * Metadata locking

     The server now prevents DDL statements from compromising
     transaction serializibility by using a new class of locks called
     metadata locks. See *Note metadata-locking::.

   * IPv6 support

     MySQL Server can accept TCP/IP connections from clients connecting
     over IPv6. See *Note ipv6-support::.

   * XML

     Enhancements to XML functionality, including a new *Note `LOAD XML
     INFILE': load-xml. statement. See *Note load-xml::.

   * Build configuration

     MySQL releases are now built using `CMake' rather than the GNU
     autotools. Accordingly, the instructions for installing MySQL from
     source have been updated to discuss how to build MySQL using
     `CMake'.  See *Note source-installation::.

     The build process is now similar enough on all platforms,
     including Windows, that there are no longer sections dedicated to
     notes for specific platforms.

* Removed Features *

The following constructs are obsolete and have been removed in MySQL
5.5. Where alternatives are shown, applications should be updated to
use them.

   * The `language' system variable (use `lc_messages_dir' and
     `lc_messages').

   * The `log_bin_trust_routine_creators' system variable (use
     `log_bin_trust_function_creators').

   * The `myisam_max_extra_sort_file_size' system variable.

   * The `record_buffer' system variable (use `read_buffer_size').

   * The `sql_log_update' system variable.

   * The `Innodb_buffer_pool_read_ahead_rnd' and
     `Innodb_buffer_pool_read_ahead_seq' status variables (use
     `Innodb_buffer_pool_read_ahead' and
     `Innodb_buffer_pool_read_ahead_evicted').

   * The `table_lock_wait_timeout' system variable.

   * The `table_type' system variable (use `storage_engine').

   * The `FRAC_SECOND' modifier for the `TIMESTAMPADD()' function (use
     `MICROSECOND').

   * The `TYPE' table option to specify the storage engine for *Note
     `CREATE TABLE': create-table.  or *Note `ALTER TABLE':
     alter-table. (use `ENGINE').

   * The `SHOW TABLE TYPES' SQL statement (use *Note `SHOW ENGINES':
     show-engines.).

   * The `SHOW INNODB STATUS' and `SHOW MUTEX STATUS' SQL statements
     (use *Note `SHOW ENGINE INNODB STATUS': show-engine. and *Note
     `SHOW ENGINE INNODB MUTEX': show-engine.).

   * The `SHOW PLUGIN' SQL statement (use *Note `SHOW PLUGINS':
     show-plugins.).

   * The `LOAD TABLE ... FROM MASTER' and `LOAD DATA FROM MASTER' SQL
     statements (use *Note `mysqldump': mysqldump. or *Note
     `mysqlhotcopy': mysqlhotcopy. to dump tables and *Note `mysql':
     mysql. to reload dump files).

   * The `BACKUP TABLE' and `RESTORE TABLE' SQL statements (use *Note
     `mysqldump': mysqldump. or *Note `mysqlhotcopy': mysqlhotcopy. to
     dump tables and *Note `mysql': mysql. to reload dump files).

   * *Note `TIMESTAMP(N)': datetime.  data type: The ability to specify
     a display width of N (use without N).

   * The `--default-character-set' and `--default-collation' server
     options (use `--character-set-server' and `--collation-server').

   * The `--default-table-type' server option (use
     `--default-storage-engine').

   * The `--delay-key-write-for-all-tables' server option (use
     `--delay-key-write=ALL').

   * The `--enable-locking' and `--skip-locking' server options (use
     `--external-locking' and `--skip-external-locking').

   * The `--log-bin-trust-routine-creators' server option (use
     `--log-bin-trust-function-creators').

   * The `--log-long-format' server option.

   * The `--log-update' server option.

   * The `--master-XXX' server options to set replication parameters
     (use the *Note `CHANGE MASTER TO': change-master-to. statement
     instead): `--master-host', `--master-user', `--master-password',
     `--master-port', `--master-connect-retry', `--master-ssl',
     `--master-ssl-ca', `--master-ssl-capath', `--master-ssl-cert',
     `--master-ssl-cipher', `--master-ssl-key'.

   * The `--safe-show-database' server option.

   * The `--skip-symlink' and `--use-symbolic-links' server options (use
     `--skip-symbolic-links' and `--symbolic-links').

   * The `--sql-bin-update-same' server option.

   * The `--warnings' server option (use `--log-warnings').

   * The `--no-named-commands' option for *Note `mysql': mysql. (use
     `--skip-named-commands').

   * The `--no-pager' option for *Note `mysql': mysql. (use
     `--skip-pager').

   * The `--no-tee' option for *Note `mysql': mysql. (use `--skip-tee').

   * The `--position' option for *Note `mysqlbinlog': mysqlbinlog. (use
     `--start-position').

   * The `--all' option for *Note `mysqldump': mysqldump. (use
     `--create-options').

   * The `--first-slave' option for *Note `mysqldump': mysqldump. (use
     `--lock-all-tables').

   * The `--config-file' option for *Note `mysqld_multi': mysqld-multi.
     (use `--defaults-extra-file').

   * The `--set-variable=VAR_NAME=VALUE' and `-O VAR_NAME=VALUE'
     general-purpose options for setting program variables (use
     `--VAR_NAME=VALUE').

   * The `--with-pstack' option for `configure' and the
     `--enable-pstack' option for *Note `mysqld': mysqld.


File: manual.info,  Node: smp-improvements,  Next: innodb-io-changes,  Prev: mysql-nutshell,  Up: mysql-nutshell

1.4.1 Scalability Improvements
------------------------------

MySQL 5.5 modifications improve performance on SMP systems to increase
scalability on multi-core systems. The changes affect *Note `InnoDB':
innodb-storage-engine. locking and memory management.

MySQL 5.5 incorporates changes in *Note `InnoDB':
innodb-storage-engine. that improve the performance of RW-locks by
using atomic CPU instructions (on platforms where they are available),
rather than less scalable mutexes. It is also possible for *Note
`InnoDB': innodb-storage-engine. memory allocation to be disabled and
replaced by the normal `malloc' library, or by a different library that
implements `malloc' such as `tcmalloc' on Linux or `mtalloc' on Solaris.

The reimplementation of RW-locks requires atomic instructions. A status
variable, `Innodb_have_atomic_builtins', shows whether the server was
built with atomic instructions.


File: manual.info,  Node: innodb-io-changes,  Next: monitoring-improvements,  Prev: smp-improvements,  Up: mysql-nutshell

1.4.2 `InnoDB' I/O Subsystem Changes
------------------------------------

MySQL 5.5 changes to the *Note `InnoDB': innodb-storage-engine. I/O
subsystem enable more effective use of available I/O capacity. The
changes also provide more control over configuration of the I/O
subsystem.

*Background I/O Threads*

*Note `InnoDB': innodb-storage-engine. uses background threads to
perform I/O for several kinds of activities, two of which are
prefetching disk blocks and flushing dirty pages. Previously, *Note
`InnoDB': innodb-storage-engine. used only one thread each to perform
these activities, but that can underutilize server capacity. MySQL 5.5
enables use of multiple background read and write threads, making it
possible to read and write pages faster.

The patch makes the number of background I/O threads configurable using
system variables: `innodb_read_io_threads' controls the number of
threads to use for read prefetch requests.  `innodb_write_io_threads'
controls the number of threads to use for writing dirty pages from the
buffer cache to disk. The default for both variables is 4.

The ability to increase the number of I/O threads can benefit systems
that use multiple disks for *Note `InnoDB': innodb-storage-engine.
However, the type of I/O being done should be considered. On systems
that use buffered writes rather than direct writes, increasing the
write thread count higher than 1 might yield little benefit because
writes will be quick already.

*Adjustable I/O Rate*

Previously, the number of input/output operations per second (IOPS)
that *Note `InnoDB': innodb-storage-engine. will perform was a
compile-time parameter. The rate was chosen to prevent background I/O
from exhausting server capacity and the compiled-in value of 100
reflected an assumption that the server can perform 100 IOPS. However,
many modern systems can exceed this, so the value is low and
unnecessarily restricts I/O utilization.

MySQL 5.5 exposes this I/O rate parameter as a system variable,
`innodb_io_capacity'. This variable can be set at server startup, which
enables higher values to be selected for systems capable of higher I/O
rates.  Having a higher I/O rate can help the server handle a higher
rate of row changes because it may be able to increase dirty-page
flushing, deleted-row removal, and application of changes to the insert
buffer. The default value of `innodb_io_capacity' is 200. In general,
you can increase the value as a function of the number of drives used
for *Note `InnoDB': innodb-storage-engine. I/O.

The ability to raise the I/O limit should be especially beneficial on
platforms that support many IOPS. For example, systems that use
multiple disks or solid-state disks for *Note `InnoDB':
innodb-storage-engine. are likely to benefit from the ability to
control this parameter.


File: manual.info,  Node: monitoring-improvements,  Next: solaris-enhancements,  Prev: innodb-io-changes,  Up: mysql-nutshell

1.4.3 Diagnostic and Monitoring Capabilities
--------------------------------------------

MySQL 5.5 provides improved access to execution and performance
information. Diagnostic improvements include Performance Schema, Dtrace
probes, expanded *Note `SHOW ENGINE INNODB STATUS': show-engine.
output, Debug Sync, and a new status variable.

*Performance Schema*

Performance Schema is a feature for monitoring MySQL Server execution
at a low level. See *Note performance-schema::.

*DTrace Support*

The DTrace probes work on Solaris, Mac OS X, and FreeBSD. For
information on using DTrace in MySQL, see *Note dba-dtrace-server::.

*Enhanced *Note `SHOW ENGINE INNODB STATUS': show-engine. Output*

The output from *Note `SHOW ENGINE INNODB STATUS': show-engine.
includes more information due to changes made for `InnoDB Plugin'. A
description of revisions to statement output follows.

A new `BACKGROUND THREAD' section has `srv_master_thread' lines that
show work done by the main background thread.

     ----------
     BACKGROUND THREAD
     ----------
     srv_master_thread loops: 53 1_second, 44 sleeps, 5 10_second, 7 background,
       7 flush
     srv_master_thread log flush and writes: 48

The `SEMAPHORES' section includes a line to show the number of spinlock
rounds per OS wait for a mutex.

     ----------
     SEMAPHORES
     ----------
     ...
     Spin rounds per wait: 0.00 mutex, 20.00 RW-shared, 0.00 RW-excl

*Debug Sync*

The Debug Sync facility provides synchronization points for debugging,
see MySQL Internals: Test Synchronization
(http://dev.mysql.com/doc/internals/en/test-synchronization.html).

*New Status Variable*

The `Innodb_have_atomic_builtins' status variable provides information
about availability of atomic instructions; see *Note smp-improvements::.


File: manual.info,  Node: solaris-enhancements,  Prev: monitoring-improvements,  Up: mysql-nutshell

1.4.4 Enhanced Solaris Support
------------------------------

MySQL 5.5 incorporates several modifications for improved operation of
MySQL Server on Solaris:

   * DTrace support for execution monitoring. See *Note
     monitoring-improvements::.

   * Atomic instructions, which are needed for the improvements to
     RW-locking described in *Note smp-improvements::. Atomic
     instructions now are supported for Sun Studio on SPARC and x86
     platforms.  This extends their previous availability (supported for
     `gcc' 4.1 and up on all platforms).

   * The SMP improvements described in *Note smp-improvements::, were
     originally intended for x86 platforms. In MySQL 5.5, these also
     work on SPARC platforms. Also, Solaris optimizations have been
     implemented.

   * Large page support is enhanced for recent SPARC platforms.
     Standard use of large pages in MySQL attempts to use the largest
     size supported, up to 4MB. Under Solaris, a `super large pages'
     feature enables uses of pages up to 256MB. This feature can be
     enabled or disabled by using the `--super-large-pages' or
     `--skip-super-large-pages' option.

   * Inline handling for *Note `InnoDB': innodb-storage-engine. and
     processor instruction prefetching support, previously not enabled
     for builds created using Sun Studio, now are supported for that
     build environment.


File: manual.info,  Node: development-history,  Next: information-sources,  Prev: mysql-nutshell,  Up: introduction

1.5 MySQL Development History
=============================

This section describes the general MySQL development history, provides
an overview about features that have been implemented in previous
series and that are new in MySQL 5.5, the release series covered in
this manual. The maturity level this release series is general
availability. Information about maturity levels can be found in *Note
choosing-version::.

Before upgrading from one release series to the next, please see the
notes in *Note upgrading::.

The most requested features and the versions in which they were
implemented are summarized in the following table.

This table summarizes the most requested MySQL features and the
versions in which they were implemented.

Feature                MySQL Series
Unions                 4.0
Subqueries             4.1
R-trees                4.1 (for the `MyISAM' storage engine)
Stored procedures and  5.0
functions              
Views                  5.0
Cursors                5.0
XA transactions        5.0
Triggers               5.0 and 5.1
Event scheduler        5.1
Partitioning           5.1
Pluggable storage      5.1
engine API             
Plugin API             5.1
InnoDB Plugin          5.1
Row-based replication  5.1
Server log tables      5.1
Scalability and        5.1 (with InnoDB Plugin)
performance            
improvements           
DTrace support         5.5
InnoDB as default      5.5
storage engine         
Semisynchronous        5.5
replication            
SIGNAL/RESIGNAL        5.5
support in stored      
routines               
Performance Schema     5.5
Supplementary Unicode  5.5
characters             


File: manual.info,  Node: information-sources,  Next: bug-reports,  Prev: development-history,  Up: introduction

1.6 MySQL Information Sources
=============================

* Menu:

* mailing-lists::                MySQL Mailing Lists
* forums::                       MySQL Community Support at the MySQL Forums
* irc::                          MySQL Community Support on Internet Relay Chat (IRC)
* mysql-enterprise-information::  MySQL Enterprise

This section lists sources of additional information that you may find
helpful, such as the MySQL mailing lists and user forums, and Internet
Relay Chat.


File: manual.info,  Node: mailing-lists,  Next: forums,  Prev: information-sources,  Up: information-sources

1.6.1 MySQL Mailing Lists
-------------------------

* Menu:

* mailing-list-use::             Guidelines for Using the Mailing Lists

This section introduces the MySQL mailing lists and provides guidelines
as to how the lists should be used. When you subscribe to a mailing
list, you receive all postings to the list as email messages. You can
also send your own questions and answers to the list.

To subscribe to or unsubscribe from any of the mailing lists described
in this section, visit `http://lists.mysql.com/'. For most of them, you
can select the regular version of the list where you get individual
messages, or a digest version where you get one large message per day.

Please _do not_ send messages about subscribing or unsubscribing to any
of the mailing lists, because such messages are distributed
automatically to thousands of other users.

Your local site may have many subscribers to a MySQL mailing list.  If
so, the site may have a local mailing list, so that messages sent from
`lists.mysql.com' to your site are propagated to the local list. In
such cases, please contact your system administrator to be added to or
dropped from the local MySQL list.

To have traffic for a mailing list go to a separate mailbox in your
mail program, set up a filter based on the message headers.  You can
use either the `List-ID:' or `Delivered-To:' headers to identify list
messages.

The MySQL mailing lists are as follows:

   * `announce'

     The list for announcements of new versions of MySQL and related
     programs. This is a low-volume list to which all MySQL users
     should subscribe.

   * `mysql'

     The main list for general MySQL discussion. Please note that some
     topics are better discussed on the more-specialized lists. If you
     post to the wrong list, you may not get an answer.

   * `bugs'

     The list for people who want to stay informed about issues
     reported since the last release of MySQL or who want to be
     actively involved in the process of bug hunting and fixing.  See
     *Note bug-reports::.

   * `internals'

     The list for people who work on the MySQL code. This is also the
     forum for discussions on MySQL development and for posting patches.

   * `mysqldoc'

     The list for people who work on the MySQL documentation.

   * `benchmarks'

     The list for anyone interested in performance issues.  Discussions
     concentrate on database performance (not limited to MySQL), but
     also include broader categories such as performance of the kernel,
     file system, disk system, and so on.

   * `packagers'

     The list for discussions on packaging and distributing MySQL.
     This is the forum used by distribution maintainers to exchange
     ideas on packaging MySQL and on ensuring that MySQL looks and
     feels as similar as possible on all supported platforms and
     operating systems.

   * `java'

     The list for discussions about the MySQL server and Java. It is
     mostly used to discuss JDBC drivers such as MySQL Connector/J.

   * `win32'

     The list for all topics concerning the MySQL software on Microsoft
     operating systems, such as Windows 9x, Me, NT, 2000, XP, and 2003.

   * `myodbc'

     The list for all topics concerning connecting to the MySQL server
     with ODBC.

   * `gui-tools'

     The list for all topics concerning MySQL graphical user interface
     tools such as MySQL Workbench.

   * `cluster'

     The list for discussion of MySQL Cluster.

   * `dotnet'

     The list for discussion of the MySQL server and the .NET platform.
     It is mostly related to MySQL Connector/Net.

   * `plusplus'

     The list for all topics concerning programming with the C++ API
     for MySQL.

   * `perl'

     The list for all topics concerning Perl support for MySQL with
     `DBD::mysql'.

If you're unable to get an answer to your questions from a MySQL
mailing list or forum, one option is to purchase support from Oracle.
This puts you in direct contact with MySQL developers.

The following MySQL mailing lists are in languages other than English.
These lists are not operated by Oracle.

   * `<mysql-france-subscribe@yahoogroups.com>'

     A French mailing list.

   * `<list@tinc.net>'

     A Korean mailing list. To subscribe, email `subscribe mysql
     your@email.address' to this list.

   * `<mysql-de-request@lists.4t2.com>'

     A German mailing list. To subscribe, email `subscribe mysql-de
     your@email.address' to this list. You can find information about
     this mailing list at `http://www.4t2.com/mysql/'.

   * `<mysql-br-request@listas.linkway.com.br>'

     A Portuguese mailing list. To subscribe, email `subscribe mysql-br
     your@email.address' to this list.

   * `<mysql-alta@elistas.net>'

     A Spanish mailing list. To subscribe, email `subscribe mysql
     your@email.address' to this list.


File: manual.info,  Node: mailing-list-use,  Prev: mailing-lists,  Up: mailing-lists

1.6.1.1 Guidelines for Using the Mailing Lists
..............................................

Please do not post mail messages from your browser with HTML mode
turned on. Many users do not read mail with a browser.

When you answer a question sent to a mailing list, if you consider your
answer to have broad interest, you may want to post it to the list
instead of replying directly to the individual who asked. Try to make
your answer general enough that people other than the original poster
may benefit from it.  When you post to the list, please make sure that
your answer is not a duplication of a previous answer.

Try to summarize the essential part of the question in your reply. Do
not feel obliged to quote the entire original message.

When answers are sent to you individually and not to the mailing list,
it is considered good etiquette to summarize the answers and send the
summary to the mailing list so that others may have the benefit of
responses you received that helped you solve your problem.


File: manual.info,  Node: forums,  Next: irc,  Prev: mailing-lists,  Up: information-sources

1.6.2 MySQL Community Support at the MySQL Forums
-------------------------------------------------

The forums at `http://forums.mysql.com' are an important community
resource. Many forums are available, grouped into these general
categories:

   * Migration

   * MySQL Usage

   * MySQL Connectors

   * Programming Languages

   * Tools

   * 3rd-Party Applications

   * Storage Engines

   * MySQL Technology

   * SQL Standards

   * Business


File: manual.info,  Node: irc,  Next: mysql-enterprise-information,  Prev: forums,  Up: information-sources

1.6.3 MySQL Community Support on Internet Relay Chat (IRC)
----------------------------------------------------------

In addition to the various MySQL mailing lists and forums, you can find
experienced community people on Internet Relay Chat (IRC).  These are
the best networks/channels currently known to us:

*freenode* (see `http://www.freenode.net/' for servers)

   * `#mysql' is primarily for MySQL questions, but other database and
     general SQL questions are welcome.  Questions about PHP, Perl, or
     C in combination with MySQL are also common.

If you are looking for IRC client software to connect to an IRC
network, take a look at `xChat' (`http://www.xchat.org/'). X-Chat (GPL
licensed) is available for Unix as well as for Windows platforms (a free
Windows build of X-Chat is available at
`http://www.silverex.org/download/').


File: manual.info,  Node: mysql-enterprise-information,  Prev: irc,  Up: information-sources

1.6.4 MySQL Enterprise
----------------------

Oracle offers technical support in the form of MySQL Enterprise.  For
organizations that rely on the MySQL DBMS for business-critical
production applications, MySQL Enterprise is a commercial subscription
offering which includes:

   * MySQL Enterprise Server

   * MySQL Enterprise Monitor

   * Monthly Rapid Updates and Quarterly Service Packs

   * MySQL Knowledge Base

   * 24x7 Technical and Consultative Support

MySQL Enterprise is available in multiple tiers, giving you the
flexibility to choose the level of service that best matches your
needs. For more information, see MySQL Enterprise
(http://www.mysql.com/products/enterprise/).


File: manual.info,  Node: bug-reports,  Next: compatibility,  Prev: information-sources,  Up: introduction

1.7 How to Report Bugs or Problems
==================================

Before posting a bug report about a problem, please try to verify that
it is a bug and that it has not been reported already:

   * Start by searching the MySQL online manual at
     `http://dev.mysql.com/doc/'. We try to keep the manual up to date
     by updating it frequently with solutions to newly found problems.
     In addition, the release notes accompanying the manual can be
     particularly useful since it is quite possible that a newer
     version contains a solution to your problem. The release notes are
     available at the location just given for the manual.

   * If you get a parse error for an SQL statement, please check your
     syntax closely. If you cannot find something wrong with it, it is
     extremely likely that your current version of MySQL Server doesn't
     support the syntax you are using. If you are using the current
     version and the manual doesn't cover the syntax that you are
     using, MySQL Server doesn't support your statement.

     If the manual covers the syntax you are using, but you have an
     older version of MySQL Server, you should check the MySQL change
     history to see when the syntax was implemented. In this case, you
     have the option of upgrading to a newer version of MySQL Server.

   * For solutions to some common problems, see *Note problems::.

   * Search the bugs database at `http://bugs.mysql.com/' to see
     whether the bug has been reported and fixed.

   * Search the MySQL mailing list archives at
     `http://lists.mysql.com/'. See *Note mailing-lists::.

   * You can also use http://www.mysql.com/search/ to search all the
     Web pages (including the manual) that are located at the MySQL Web
     site.

If you cannot find an answer in the manual, the bugs database, or the
mailing list archives, check with your local MySQL expert. If you still
cannot find an answer to your question, please use the following
guidelines for reporting the bug.

The normal way to report bugs is to visit `http://bugs.mysql.com/',
which is the address for our bugs database. This database is public and
can be browsed and searched by anyone. If you log in to the system, you
can enter new reports.

Bugs posted in the bugs database at `http://bugs.mysql.com/' that are
corrected for a given release are noted in the release notes.

If you find a sensitive security bug in MySQL Server, please let us
know immediately by sending an email message to
<secalert_us@oracle.com>. Exception: Support customers should report
all problems, including security bugs, to Oracle Support at
`http://support.oracle.com/'.

To discuss problems with other users, you can use one of the MySQL
mailing lists. *Note mailing-lists::.

Writing a good bug report takes patience, but doing it right the first
time saves time both for us and for yourself. A good bug report,
containing a full test case for the bug, makes it very likely that we
will fix the bug in the next release. This section helps you write your
report correctly so that you do not waste your time doing things that
may not help us much or at all. Please read this section carefully and
make sure that all the information described here is included in your
report.

Preferably, you should test the problem using the latest production or
development version of MySQL Server before posting. Anyone should be
able to repeat the bug by just using `mysql test < script_file' on your
test case or by running the shell or Perl script that you include in
the bug report. Any bug that we are able to repeat has a high chance of
being fixed in the next MySQL release.

It is most helpful when a good description of the problem is included
in the bug report. That is, give a good example of everything you did
that led to the problem and describe, in exact detail, the problem
itself. The best reports are those that include a full example showing
how to reproduce the bug or problem. See *Note porting::.

Remember that it is possible for us to respond to a report containing
too much information, but not to one containing too little. People
often omit facts because they think they know the cause of a problem
and assume that some details do not matter. A good principle to follow
is that if you are in doubt about stating something, state it. It is
faster and less troublesome to write a couple more lines in your report
than to wait longer for the answer if we must ask you to provide
information that was missing from the initial report.

The most common errors made in bug reports are (a) not including the
version number of the MySQL distribution that you use, and (b) not
fully describing the platform on which the MySQL server is installed
(including the platform type and version number). These are highly
relevant pieces of information, and in 99 cases out of 100, the bug
report is useless without them. Very often we get questions like, `Why
doesn't this work for me?' Then we find that the feature requested
wasn't implemented in that MySQL version, or that a bug described in a
report has been fixed in newer MySQL versions.  Errors often are
platform-dependent. In such cases, it is next to impossible for us to
fix anything without knowing the operating system and the version
number of the platform.

If you compiled MySQL from source, remember also to provide information
about your compiler if it is related to the problem.  Often people find
bugs in compilers and think the problem is MySQL-related. Most
compilers are under development all the time and become better version
by version. To determine whether your problem depends on your compiler,
we need to know what compiler you used.  Note that every compiling
problem should be regarded as a bug and reported accordingly.

If a program produces an error message, it is very important to include
the message in your report. If we try to search for something from the
archives, it is better that the error message reported exactly matches
the one that the program produces. (Even the lettercase should be
observed.) It is best to copy and paste the entire error message into
your report. You should never try to reproduce the message from memory.

If you have a problem with Connector/ODBC (MyODBC), please try to
generate a trace file and send it with your report. See *Note
connector-odbc-support-bug-report::.

If your report includes long query output lines from test cases that
you run with the *Note `mysql': mysql. command-line tool, you can make
the output more readable by using the `--vertical' option or the `\G'
statement terminator. The *Note `EXPLAIN SELECT': explain.  example
later in this section demonstrates the use of `\G'.

Please include the following information in your report:

   * The version number of the MySQL distribution you are using (for
     example, MySQL 5.0.19). You can find out which version you are
     running by executing *Note `mysqladmin version': mysqladmin. The
     *Note `mysqladmin': mysqladmin. program can be found in the `bin'
     directory under your MySQL installation directory.

   * The manufacturer and model of the machine on which you experience
     the problem.

   * The operating system name and version. If you work with Windows,
     you can usually get the name and version number by double-clicking
     your My Computer icon and pulling down the `Help/About Windows'
     menu. For most Unix-like operating systems, you can get this
     information by executing the command `uname -a'.

   * Sometimes the amount of memory (real and virtual) is relevant.  If
     in doubt, include these values.

   * If you are using a source distribution of the MySQL software,
     include the name and version number of the compiler that you used.
     If you have a binary distribution, include the distribution name.

   * If the problem occurs during compilation, include the exact error
     messages and also a few lines of context around the offending code
     in the file where the error occurs.

   * If *Note `mysqld': mysqld. died, you should also report the
     statement that crashed *Note `mysqld': mysqld. You can usually get
     this information by running *Note `mysqld': mysqld. with query
     logging enabled, and then looking in the log after *Note `mysqld':
     mysqld. crashes. See *Note porting::.

   * If a database table is related to the problem, include the output
     from the `SHOW CREATE TABLE DB_NAME.TBL_NAME' statement in the bug
     report. This is a very easy way to get the definition of any table
     in a database. The information helps us create a situation
     matching the one that you have experienced.

   * The SQL mode in effect when the problem occurred can be
     significant, so please report the value of the `sql_mode' system
     variable. For stored procedure, stored function, and trigger
     objects, the relevant `sql_mode' value is the one in effect when
     the object was created. For a stored procedure or function, the
     *Note `SHOW CREATE PROCEDURE': show-create-procedure. or *Note
     `SHOW CREATE FUNCTION': show-create-function. statement shows the
     relevant SQL mode, or you can query `INFORMATION_SCHEMA' for the
     information:

          SELECT ROUTINE_SCHEMA, ROUTINE_NAME, SQL_MODE
          FROM INFORMATION_SCHEMA.ROUTINES;

     For triggers, you can use this statement:

          SELECT EVENT_OBJECT_SCHEMA, EVENT_OBJECT_TABLE, TRIGGER_NAME, SQL_MODE
          FROM INFORMATION_SCHEMA.TRIGGERS;

   * For performance-related bugs or problems with *Note `SELECT':
     select. statements, you should always include the output of
     `EXPLAIN SELECT ...', and at least the number of rows that the
     *Note `SELECT': select. statement produces. You should also
     include the output from `SHOW CREATE TABLE TBL_NAME' for each table
     that is involved. The more information you provide about your
     situation, the more likely it is that someone can help you.

     The following is an example of a very good bug report. The
     statements are run using the *Note `mysql': mysql.  command-line
     tool. Note the use of the `\G' statement terminator for statements
     that would otherwise provide very long output lines that are
     difficult to read.

          mysql> SHOW VARIABLES;
          mysql> SHOW COLUMNS FROM ...\G
                 <OUTPUT FROM SHOW COLUMNS>
          mysql> EXPLAIN SELECT ...\G
                 <OUTPUT FROM EXPLAIN>
          mysql> FLUSH STATUS;
          mysql> SELECT ...;
                 <A SHORT VERSION OF THE OUTPUT FROM SELECT,
                 INCLUDING THE TIME TAKEN TO RUN THE QUERY>
          mysql> SHOW STATUS;
                 <OUTPUT FROM SHOW STATUS>

   * If a bug or problem occurs while running *Note `mysqld': mysqld,
     try to provide an input script that reproduces the anomaly. This
     script should include any necessary source files. The more closely
     the script can reproduce your situation, the better. If you can
     make a reproducible test case, you should upload it to be attached
     to the bug report.

     If you cannot provide a script, you should at least include the
     output from *Note `mysqladmin variables extended-status
     processlist': mysqladmin. in your report to provide some
     information on how your system is performing.

   * If you cannot produce a test case with only a few rows, or if the
     test table is too big to be included in the bug report (more than
     10 rows), you should dump your tables using *Note `mysqldump':
     mysqldump. and create a `README' file that describes your problem.
     Create a compressed archive of your files using `tar' and `gzip' or
     `zip'. After you initiate a bug report for our bugs database at
     `http://bugs.mysql.com/', click the Files tab in the bug report
     for instructions on uploading the archive to the bugs database.

   * If you believe that the MySQL server produces a strange result
     from a statement, include not only the result, but also your
     opinion of what the result should be, and an explanation
     describing the basis for your opinion.

   * When you provide an example of the problem, it is better to use
     the table names, variable names, and so forth that exist in your
     actual situation than to come up with new names. The problem could
     be related to the name of a table or variable. These cases are
     rare, perhaps, but it is better to be safe than sorry. After all,
     it should be easier for you to provide an example that uses your
     actual situation, and it is by all means better for us. If you
     have data that you do not want to be visible to others in the bug
     report, you can upload it using the Files tab as previously
     described. If the information is really top secret and you do not
     want to show it even to us, go ahead and provide an example using
     other names, but please regard this as the last choice.

   * Include all the options given to the relevant programs, if
     possible. For example, indicate the options that you use when you
     start the *Note `mysqld': mysqld. server, as well as the options
     that you use to run any MySQL client programs. The options to
     programs such as *Note `mysqld': mysqld. and *Note `mysql': mysql,
     and to the `configure' script, are often key to resolving problems
     and are very relevant. It is never a bad idea to include them. If
     your problem involves a program written in a language such as Perl
     or PHP, please include the language processor's version number, as
     well as the version for any modules that the program uses. For
     example, if you have a Perl script that uses the `DBI' and
     `DBD::mysql' modules, include the version numbers for Perl, `DBI',
     and `DBD::mysql'.

   * If your question is related to the privilege system, please
     include the output of *Note `mysqlaccess': mysqlaccess, the output
     of *Note `mysqladmin reload': mysqladmin, and all the error
     messages you get when trying to connect. When you test your
     privileges, you should first run *Note `mysqlaccess': mysqlaccess.
     After this, execute *Note `mysqladmin reload version': mysqladmin.
     and try to connect with the program that gives you trouble.  *Note
     `mysqlaccess': mysqlaccess. can be found in the `bin' directory
     under your MySQL installation directory.

   * If you have a patch for a bug, do include it. But do not assume
     that the patch is all we need, or that we can use it, if you do
     not provide some necessary information such as test cases showing
     the bug that your patch fixes. We might find problems with your
     patch or we might not understand it at all. If so, we cannot use
     it.

     If we cannot verify the exact purpose of the patch, we will not
     use it. Test cases help us here. Show that the patch handles all
     the situations that may occur. If we find a borderline case (even
     a rare one) where the patch will not work, it may be useless.

   * Guesses about what the bug is, why it occurs, or what it depends
     on are usually wrong. Even the MySQL team cannot guess such things
     without first using a debugger to determine the real cause of a
     bug.

   * Indicate in your bug report that you have checked the reference
     manual and mail archive so that others know you have tried to
     solve the problem yourself.

   * If your data appears corrupt or you get errors when you access a
     particular table, first check your tables with *Note `CHECK
     TABLE': check-table. If that statement reports any errors:

        * The `InnoDB' crash recovery mechanism handles cleanup when
          the server is restarted after being killed, so in typical
          operation there is no need to `repair' tables. If you
          encounter an error with `InnoDB' tables, restart the server
          and see whether the problem persists, or whether the error
          affected only cached data in memory. If data is corrupted on
          disk, consider restarting with the `innodb_force_recovery'
          option enabled so that you can dump the affected tables.

        * For non-transactional tables, try to repair them with *Note
          `REPAIR TABLE': repair-table. or with *Note `myisamchk':
          myisamchk. See *Note server-administration::.

     If you are running Windows, please verify the value of
     `lower_case_table_names' using the `SHOW VARIABLES LIKE
     'lower_case_table_names'' statement. This variable affects how the
     server handles lettercase of database and table names. Its effect
     for a given value should be as described in *Note
     identifier-case-sensitivity::.

   * If you often get corrupted tables, you should try to find out when
     and why this happens. In this case, the error log in the MySQL
     data directory may contain some information about what happened.
     (This is the file with the `.err' suffix in the name.) See *Note
     error-log::. Please include any relevant information from this
     file in your bug report. Normally *Note `mysqld': mysqld. should
     _never_ crash a table if nothing killed it in the middle of an
     update. If you can find the cause of *Note `mysqld': mysqld.
     dying, it is much easier for us to provide you with a fix for the
     problem. See *Note what-is-crashing::.

   * If possible, download and install the most recent version of MySQL
     Server and check whether it solves your problem. All versions of
     the MySQL software thoroughly tested and should work without
     problems. We believe in making everything as backward-compatible
     as possible, and you should be able to switch MySQL versions
     without difficulty. See *Note which-version::.


File: manual.info,  Node: compatibility,  Next: credits,  Prev: bug-reports,  Up: introduction

1.8 MySQL Standards Compliance
==============================

* Menu:

* standards::                    What Standards MySQL Follows
* sql-mode::                     Selecting SQL Modes
* ansi-mode::                    Running MySQL in ANSI Mode
* extensions-to-ansi::           MySQL Extensions to Standard SQL
* differences-from-ansi::        MySQL Differences from Standard SQL
* constraints::                  How MySQL Deals with Constraints

This section describes how MySQL relates to the ANSI/ISO SQL standards.
MySQL Server has many extensions to the SQL standard, and here you can
find out what they are and how to use them. You can also find
information about functionality missing from MySQL Server, and how to
work around some of the differences.

The SQL standard has been evolving since 1986 and several versions
exist. In this manual, `SQL-92' refers to the standard released in
1992, `SQL:1999' refers to the standard released in 1999, `SQL:2003'
refers to the standard released in 2003, and `SQL:2008' refers to the
most recent version of the standard, released in 2008. We use the
phrase `the SQL standard' or `standard SQL' to mean the current version
of the SQL Standard at any time.

One of our main goals with the product is to continue to work toward
compliance with the SQL standard, but without sacrificing speed or
reliability. We are not afraid to add extensions to SQL or support for
non-SQL features if this greatly increases the usability of MySQL
Server for a large segment of our user base.  The *Note `HANDLER':
handler. interface is an example of this strategy. See *Note handler::.

We continue to support transactional and nontransactional databases to
satisfy both mission-critical 24/7 usage and heavy Web or logging usage.

MySQL Server was originally designed to work with medium-sized
databases (10-100 million rows, or about 100MB per table) on small
computer systems. Today MySQL Server handles terabyte-sized databases,
but the code can also be compiled in a reduced version suitable for
hand-held and embedded devices. The compact design of the MySQL server
makes development in both directions possible without any conflicts in
the source tree.

Currently, we are not targeting real-time support, although MySQL
replication capabilities offer significant functionality.

MySQL supports high-availability database clustering using the *Note
`NDBCLUSTER': mysql-cluster. storage engine. See *Note mysql-cluster::.

We are implementing XML functionality beginning in MySQL 5.1, which
supports most of the W3C XPath standard. See *Note xml-functions::.


File: manual.info,  Node: standards,  Next: sql-mode,  Prev: compatibility,  Up: compatibility

1.8.1 What Standards MySQL Follows
----------------------------------

Our aim is to support the full ANSI/ISO SQL standard, but without
making concessions to speed and quality of the code.

ODBC levels 0 to 3.51.


File: manual.info,  Node: sql-mode,  Next: ansi-mode,  Prev: standards,  Up: compatibility

1.8.2 Selecting SQL Modes
-------------------------

The MySQL server can operate in different SQL modes, and can apply
these modes differentially for different clients. This capability
enables each application to tailor the server's operating mode to its
own requirements.

SQL modes control aspects of server operation such as what SQL syntax
MySQL should support and what kind of data validation checks it should
perform. This makes it easier to use MySQL in different environments
and to use MySQL together with other database servers.

You can set the default SQL mode by starting *Note `mysqld': mysqld.
with the `--sql-mode="MODE_VALUE"' option. You can also change the mode
at runtime by setting the `sql_mode' system variable with a *Note `SET
[GLOBAL|SESSION] sql_mode='MODE_VALUE'': set-statement.  statement.

For more information on setting the SQL mode, see *Note
server-sql-mode::.


File: manual.info,  Node: ansi-mode,  Next: extensions-to-ansi,  Prev: sql-mode,  Up: compatibility

1.8.3 Running MySQL in ANSI Mode
--------------------------------

You can tell *Note `mysqld': mysqld. to run in ANSI mode with the
`--ansi' startup option.  Running the server in ANSI mode is the same
as starting it with the following options:

     --transaction-isolation=SERIALIZABLE --sql-mode=ANSI

You can achieve the same effect at runtime by executing these two
statements:

     SET GLOBAL TRANSACTION ISOLATION LEVEL SERIALIZABLE;
     SET GLOBAL sql_mode = 'ANSI';

You can see that setting the `sql_mode' system variable to `'ANSI''
enables all SQL mode options that are relevant for ANSI mode as follows:

     mysql> SET GLOBAL sql_mode='ANSI';
     mysql> SELECT @@global.sql_mode;
             -> 'REAL_AS_FLOAT,PIPES_AS_CONCAT,ANSI_QUOTES,IGNORE_SPACE,ANSI'

Running the server in ANSI mode with `--ansi' is not quite the same as
setting the SQL mode to `'ANSI''. The `--ansi' option affects the SQL
mode and also sets the transaction isolation level. Setting the SQL
mode to `'ANSI'' has no effect on the isolation level.

See *Note server-options::, and *Note sql-mode::.


File: manual.info,  Node: extensions-to-ansi,  Next: differences-from-ansi,  Prev: ansi-mode,  Up: compatibility

1.8.4 MySQL Extensions to Standard SQL
--------------------------------------

MySQL Server supports some extensions that you probably won't find in
other SQL DBMSs. Be warned that if you use them, your code won't be
portable to other SQL servers. In some cases, you can write code that
includes MySQL extensions, but is still portable, by using comments of
the following form:

     /*! MYSQL-SPECIFIC CODE */

In this case, MySQL Server parses and executes the code within the
comment as it would any other SQL statement, but other SQL servers will
ignore the extensions. For example, MySQL Server recognizes the
`STRAIGHT_JOIN' keyword in the following statement, but other servers
will not:

     SELECT /*! STRAIGHT_JOIN */ col1 FROM table1,table2 WHERE ...

If you add a version number after the ``!'' character, the syntax within
the comment is executed only if the MySQL version is greater than or
equal to the specified version number. The `TEMPORARY' keyword in the
following comment is executed only by servers from MySQL 3.23.02 or
higher:

     CREATE /*!32302 TEMPORARY */ TABLE t (a INT);

The following descriptions list MySQL extensions, organized by category.

   * Organization of data on disk

     MySQL Server maps each database to a directory under the MySQL
     data directory, and maps tables within a database to file names in
     the database directory. This has a few implications:

        * Database and table names are case sensitive in MySQL Server
          on operating systems that have case-sensitive file names
          (such as most Unix systems). See *Note
          identifier-case-sensitivity::.

        * You can use standard system commands to back up, rename,
          move, delete, and copy tables that are managed by the
          `MyISAM' storage engine. For example, it is possible to
          rename a `MyISAM' table by renaming the `.MYD', `.MYI', and
          `.frm' files to which the table corresponds. (Nevertheless, it
          is preferable to use *Note `RENAME TABLE': rename-table. or
          `ALTER TABLE ...  RENAME' and let the server rename the
          files.)

   * General language syntax

        * By default, strings can be enclosed by either ``"'' or ``''',
          not just by ``'''. (If the `ANSI_QUOTES' SQL mode is enabled,
          strings can be enclosed only by ``''' and the server
          interprets strings enclosed by ``"'' as identifiers.)

        * ``\'' is the escape character in strings.

        * In SQL statements, you can access tables from different
          databases with the DB_NAME.TBL_NAME syntax. Some SQL servers
          provide the same functionality but call this `User space'.
          MySQL Server doesn't support tablespaces such as used in
          statements like this: `CREATE TABLE ralph.my_table ... IN
          my_tablespace'.

   * SQL statement syntax

        * The *Note `ANALYZE TABLE': analyze-table, *Note `CHECK
          TABLE': check-table, *Note `OPTIMIZE TABLE': optimize-table,
          and *Note `REPAIR TABLE': repair-table. statements.

        * The *Note `CREATE DATABASE': create-database, *Note `DROP
          DATABASE': drop-database, and *Note `ALTER DATABASE':
          alter-database.  statements. See *Note create-database::,
          *Note drop-database::, and *Note alter-database::.

        * The *Note `DO': do. statement.

        * *Note `EXPLAIN SELECT': explain. to obtain a description of
          how tables are processed by the query optimizer.

        * The *Note `FLUSH': flush. and *Note `RESET': reset.
          statements.

        * The *Note `SET': set-statement.  statement. See *Note
          set-statement::.

        * The *Note `SHOW': show. statement. See *Note show::. The
          information produced by many of the MySQL-specific *Note
          `SHOW': show. statements can be obtained in more standard
          fashion by using *Note `SELECT': select. to query
          `INFORMATION_SCHEMA'. See *Note information-schema::.

        * Use of *Note `LOAD DATA INFILE': load-data. In many cases,
          this syntax is compatible with Oracle's *Note `LOAD DATA
          INFILE': load-data. See *Note load-data::.

        * Use of *Note `RENAME TABLE': rename-table. See *Note
          rename-table::.

        * Use of *Note `REPLACE': replace. instead of *Note `DELETE':
          delete. plus *Note `INSERT': insert. See *Note replace::.

        * Use of `CHANGE COL_NAME', `DROP COL_NAME', or *Note `DROP
          INDEX': drop-index, `IGNORE' or `RENAME' in *Note `ALTER
          TABLE': alter-table.  statements. Use of multiple `ADD',
          `ALTER', `DROP', or `CHANGE' clauses in an *Note `ALTER
          TABLE': alter-table. statement.  See *Note alter-table::.

        * Use of index names, indexes on a prefix of a column, and use
          of `INDEX' or `KEY' in *Note `CREATE TABLE': create-table.
          statements. See *Note create-table::.

        * Use of `TEMPORARY' or `IF NOT EXISTS' with *Note `CREATE
          TABLE': create-table.

        * Use of `IF EXISTS' with *Note `DROP TABLE': drop-table. and
          *Note `DROP DATABASE': drop-database.

        * The capability of dropping multiple tables with a single
          *Note `DROP TABLE': drop-table. statement.

        * The `ORDER BY' and `LIMIT' clauses of the *Note `UPDATE':
          update. and *Note `DELETE': delete. statements.

        * `INSERT INTO TBL_NAME SET COL_NAME = ...' syntax.

        * The `DELAYED' clause of the *Note `INSERT': insert. and *Note
          `REPLACE': replace. statements.

        * The `LOW_PRIORITY' clause of the *Note `INSERT': insert,
          *Note `REPLACE': replace, *Note `DELETE': delete, and *Note
          `UPDATE': update. statements.

        * Use of `INTO OUTFILE' or `INTO DUMPFILE' in *Note `SELECT':
          select. statements. See *Note select::.

        * Options such as `STRAIGHT_JOIN' or `SQL_SMALL_RESULT' in
          *Note `SELECT': select. statements.

        * You don't need to name all selected columns in the `GROUP BY'
          clause. This gives better performance for some very specific,
          but quite normal queries. See *Note
          group-by-functions-and-modifiers::.

        * You can specify `ASC' and `DESC' with `GROUP BY', not just
          with `ORDER BY'.

        * The ability to set variables in a statement with the `:='
          assignment operator. See *Note user-variables::.

   * Data types

        * The *Note `MEDIUMINT': integer-types, *Note `SET': set, and
          *Note `ENUM': enum. data types, and the various *Note `BLOB':
          blob. and *Note `TEXT': blob. data types.

        * The `AUTO_INCREMENT', `BINARY', `NULL', `UNSIGNED', and
          `ZEROFILL' data type attributes.

   * Functions and operators

        * To make it easier for users who migrate from other SQL
          environments, MySQL Server supports aliases for many
          functions. For example, all string functions support both
          standard SQL syntax and ODBC syntax.

        * MySQL Server understands the `||' and `&&' operators to mean
          logical OR and AND, as in the C programming language. In
          MySQL Server, `||' and `OR' are synonyms, as are `&&' and
          `AND'.  Because of this nice syntax, MySQL Server doesn't
          support the standard SQL `||' operator for string
          concatenation; use `CONCAT()' instead. Because `CONCAT()'
          takes any number of arguments, it is easy to convert use of
          the `||' operator to MySQL Server.

        * Use of `COUNT(DISTINCT VALUE_LIST)' where VALUE_LIST has more
          than one element.

        * String comparisons are case-insensitive by default, with sort
          ordering determined by the collation of the current character
          set, which is `latin1' (cp1252 West European) by default. If
          you don't like this, you should declare your columns with the
          `BINARY' attribute or use the `BINARY' cast, which causes
          comparisons to be done using the underlying character code
          values rather than a lexical ordering.

        * The `%' operator is a synonym for `MOD()'. That is, `N % M'
          is equivalent to `MOD(N,M)'.  `%' is supported for C
          programmers and for compatibility with PostgreSQL.

        * The `=', `<>', `<=', `<', `>=', `>', `<<', `>>', `<=>', `AND',
          `OR', or `LIKE' operators may be used in expressions in the
          output column list (to the left of the `FROM') in *Note
          `SELECT': select. statements. For example:

               mysql> SELECT col1=1 AND col2=2 FROM my_table;

        * The `LAST_INSERT_ID()' function returns the most recent
          `AUTO_INCREMENT' value. See *Note information-functions::.

        * `LIKE' is permitted on numeric values.

        * The `REGEXP' and `NOT REGEXP' extended regular expression
          operators.

        * `CONCAT()' or `CHAR()' with one argument or more than two
          arguments. (In MySQL Server, these functions can take a
          variable number of arguments.)

        * The `BIT_COUNT()', `CASE', `ELT()', `FROM_DAYS()', `FORMAT()',
          `IF()', `PASSWORD()', `ENCRYPT()', `MD5()', `ENCODE()',
          `DECODE()', `PERIOD_ADD()', `PERIOD_DIFF()', `TO_DAYS()', and
          `WEEKDAY()' functions.

        * Use of `TRIM()' to trim substrings. Standard SQL supports
          removal of single characters only.

        * The `GROUP BY' functions `STD()', `BIT_OR()', `BIT_AND()',
          `BIT_XOR()', and `GROUP_CONCAT()'. See *Note
          group-by-functions-and-modifiers::.


File: manual.info,  Node: differences-from-ansi,  Next: constraints,  Prev: extensions-to-ansi,  Up: compatibility

1.8.5 MySQL Differences from Standard SQL
-----------------------------------------

* Menu:

* ansi-diff-select-into-table::  `SELECT INTO TABLE' Differences
* ansi-diff-update::             `UPDATE' Differences
* ansi-diff-transactions::       Transaction and Atomic Operation Differences
* ansi-diff-foreign-keys::       Foreign Key Differences
* ansi-diff-comments::           '`--'' as the Start of a Comment

We try to make MySQL Server follow the ANSI SQL standard and the ODBC
SQL standard, but MySQL Server performs operations differently in some
cases:

   * There are several differences between the MySQL and standard SQL
     privilege systems. For example, in MySQL, privileges for a table
     are not automatically revoked when you delete a table. You must
     explicitly issue a *Note `REVOKE': revoke. statement to revoke
     privileges for a table. For more information, see *Note revoke::.

   * The `CAST()' function does not support cast to *Note `REAL':
     floating-point-types. or *Note `BIGINT': integer-types. See *Note
     cast-functions::.


File: manual.info,  Node: ansi-diff-select-into-table,  Next: ansi-diff-update,  Prev: differences-from-ansi,  Up: differences-from-ansi

1.8.5.1 `SELECT INTO TABLE' Differences
.......................................

MySQL Server doesn't support the `SELECT ... INTO TABLE' Sybase SQL
extension. Instead, MySQL Server supports the *Note `INSERT INTO ...
SELECT': insert-select. standard SQL syntax, which is basically the
same thing. See *Note insert-select::. For example:

     INSERT INTO tbl_temp2 (fld_id)
         SELECT tbl_temp1.fld_order_id
         FROM tbl_temp1 WHERE tbl_temp1.fld_order_id > 100;

Alternatively, you can use *Note `SELECT ... INTO OUTFILE':
select-into. or *Note `CREATE TABLE ... SELECT': create-table.

You can use *Note `SELECT ... INTO': select. with user-defined
variables. The same syntax can also be used inside stored routines
using cursors and local variables. See *Note select-into::.


File: manual.info,  Node: ansi-diff-update,  Next: ansi-diff-transactions,  Prev: ansi-diff-select-into-table,  Up: differences-from-ansi

1.8.5.2 `UPDATE' Differences
............................

If you access a column from the table to be updated in an expression,
*Note `UPDATE': update. uses the current value of the column. The
second assignment in the following statement sets `col2' to the current
(updated) `col1' value, not the original `col1' value. The result is
that `col1' and `col2' have the same value. This behavior differs from
standard SQL.

     UPDATE t1 SET col1 = col1 + 1, col2 = col1;


File: manual.info,  Node: ansi-diff-transactions,  Next: ansi-diff-foreign-keys,  Prev: ansi-diff-update,  Up: differences-from-ansi

1.8.5.3 Transaction and Atomic Operation Differences
....................................................

MySQL Server (version 3.23-max and all versions 4.0 and above) supports
transactions with the `InnoDB' transactional storage engine. `InnoDB'
provides _full_ ACID compliance. See *Note storage-engines::. For
information about `InnoDB' differences from standard SQL with regard to
treatment of transaction errors, see *Note innodb-error-handling::.

The other nontransactional storage engines in MySQL Server (such as
`MyISAM') follow a different paradigm for data integrity called `atomic
operations.' In transactional terms, `MyISAM' tables effectively always
operate in `autocommit = 1' mode. Atomic operations often offer
comparable integrity with higher performance.

Because MySQL Server supports both paradigms, you can decide whether
your applications are best served by the speed of atomic operations or
the use of transactional features. This choice can be made on a
per-table basis.

As noted, the tradeoff for transactional versus nontransactional
storage engines lies mostly in performance.  Transactional tables have
significantly higher memory and disk space requirements, and more CPU
overhead. On the other hand, transactional storage engines such as
`InnoDB' also offer many significant features. MySQL Server's modular
design enables the concurrent use of different storage engines to suit
different requirements and deliver optimum performance in all
situations.

* Workarounds for Reliability with Non-Transactional Tables *

But how do you use the features of MySQL Server to maintain integrity
even with the nontransactional `MyISAM' tables, and how do these
features compare with the transactional storage engines?

   * If your applications are written in a way that is dependent on
     being able to call *Note `ROLLBACK': commit.  rather than *Note
     `COMMIT': commit. in critical situations, transactions are more
     convenient.  Transactions also ensure that unfinished updates or
     corrupting activities are not committed to the database; the
     server is given the opportunity to do an automatic rollback and
     your database is saved.

     If you use nontransactional tables, you must resolve potential
     problems at the application level by including simple checks
     before updates and by running simple scripts that check the
     databases for inconsistencies and automatically repair or warn if
     such an inconsistency occurs. You can normally fix tables
     perfectly with no data integrity loss just by using the MySQL log
     or even adding one extra log.

   * More often than not, critical transactional updates can be
     rewritten to be atomic. Generally speaking, all integrity problems
     that transactions solve can be done with *Note `LOCK TABLES':
     lock-tables. or atomic updates, ensuring that there are no
     automatic aborts from the server, which is a common problem with
     transactional database systems.

   * To be safe with MySQL Server, regardless of what kinds of tables
     you use, make regular backups and have binary logging turned on.
     It is always good to have backups, regardless of which database
     system you use.

The transactional paradigm has its advantages and disadvantages. Many
users and application developers depend on the ease with which they can
code around problems where an abort appears to be necessary, or is
necessary. However, even if you are new to the atomic operations
paradigm, or more familiar with transactions, do consider the speed
benefit that nontransactional tables can offer on the order of three to
five times the speed of the fastest and most optimally tuned
transactional tables.

In situations where integrity is of highest importance, MySQL Server
offers transaction-level reliability and integrity even for
nontransactional tables. If you lock tables with *Note `LOCK TABLES':
lock-tables, all updates stall until integrity checks are made. If you
obtain a `READ LOCAL' lock (as opposed to a write lock) for a table
that enables concurrent inserts at the end of the table, reads are
permitted, as are inserts by other clients. The newly inserted records
are not be seen by the client that has the read lock until it releases
the lock. With *Note `INSERT DELAYED': insert-delayed, you can write
inserts that go into a local queue until the locks are released,
without having the client wait for the insert to complete. See *Note
concurrent-inserts::, and *Note insert-delayed::.

`Atomic,' in the sense that we mean it, is nothing magical. It only
means that you can be sure that while each specific update is running,
no other user can interfere with it, and there can never be an
automatic rollback (which can happen with transactional tables if you
are not very careful). MySQL Server also guarantees that there are no
dirty reads.

Following are some techniques for working with nontransactional tables:

   * Loops that need transactions normally can be coded with the help
     of *Note `LOCK TABLES': lock-tables, and you don't need cursors to
     update records on the fly.

   * To avoid using *Note `ROLLBACK': commit, you can employ the
     following strategy:

       1. Use *Note `LOCK TABLES': lock-tables. to lock all the tables
          you want to access.

       2. Test the conditions that must be true before performing the
          update.

       3. Update if the conditions are satisfied.

       4. Use *Note `UNLOCK TABLES': lock-tables. to release your locks.

     *Note*:

     This solution does not handle the situation when someone kills the
     threads in the middle of an update. In that case, all locks are
     released but some of the updates may not have been executed.

   * You can also use functions to update records in a single
     operation, using the following techniques:

        * Modify columns relative to their current value. This makes
          the update correct even if another client has changed the
          column values in the meantime.

        * Update only those columns that actually have changed.  This
          is a good database practice in general.

   * When managing unique identifiers, you can avoid statements such as
     *Note `LOCK TABLES': lock-tables. or *Note `ROLLBACK': commit.  by
     using an `AUTO_INCREMENT' column and either the `LAST_INSERT_ID()'
     SQL function or the *Note `mysql_insert_id()': mysql-insert-id. C
     API function. See *Note information-functions::, and *Note
     mysql-insert-id::.

     For situations that require row-level locking, use *Note `InnoDB':
     innodb-storage-engine. tables. Otherwise, with *Note `MyISAM':
     myisam-storage-engine. tables, you can use a flag column in the
     table and do something like the following:

          UPDATE TBL_NAME SET row_flag=1 WHERE id=ID;

     MySQL returns `1' for the number of affected rows if the row was
     found and `row_flag' wasn't `1' in the original row. You can think
     of this as though MySQL Server changed the preceding statement to:

          UPDATE TBL_NAME SET row_flag=1 WHERE id=ID AND row_flag <> 1;


File: manual.info,  Node: ansi-diff-foreign-keys,  Next: ansi-diff-comments,  Prev: ansi-diff-transactions,  Up: differences-from-ansi

1.8.5.4 Foreign Key Differences
...............................

The `InnoDB' storage engine supports checking of foreign key
constraints, including `CASCADE', `ON DELETE', and `ON UPDATE'. See
*Note innodb-foreign-key-constraints::.

For storage engines other than `InnoDB', MySQL Server parses the
`FOREIGN KEY' syntax in *Note `CREATE TABLE': create-table. statements,
but does not use or store it. In the future, the implementation will be
extended to store this information in the table specification file so
that it may be retrieved by *Note `mysqldump': mysqldump. and ODBC. At
a later stage, foreign key constraints will be implemented for `MyISAM'
tables as well.

Foreign key enforcement offers several benefits to database developers:

   * Assuming proper design of the relationships, foreign key
     constraints make it more difficult for a programmer to introduce
     an inconsistency into the database.

   * Centralized checking of constraints by the database server makes
     it unnecessary to perform these checks on the application side.
     This eliminates the possibility that different applications may
     not all check the constraints in the same way.

   * Using cascading updates and deletes can simplify the application
     code.

   * Properly designed foreign key rules aid in documenting
     relationships between tables.

Do keep in mind that these benefits come at the cost of additional
overhead for the database server to perform the necessary checks.
Additional checking by the server affects performance, which for some
applications may be sufficiently undesirable as to be avoided if
possible. (Some major commercial applications have coded the foreign
key logic at the application level for this reason.)

MySQL gives database developers the choice of which approach to use. If
you don't need foreign keys and want to avoid the overhead associated
with enforcing referential integrity, you can choose another storage
engine instead, such as `MyISAM'. (For example, the `MyISAM' storage
engine offers very fast performance for applications that perform only
*Note `INSERT': insert. and *Note `SELECT': select. operations. In this
case, the table has no holes in the middle and the inserts can be
performed concurrently with retrievals. See *Note concurrent-inserts::.)

If you choose not to take advantage of referential integrity checks,
keep the following considerations in mind:

   * In the absence of server-side foreign key relationship checking,
     the application itself must handle relationship issues. For
     example, it must take care to insert rows into tables in the
     proper order, and to avoid creating orphaned child records. It
     must also be able to recover from errors that occur in the middle
     of multiple-record insert operations.

   * If `ON DELETE' is the only referential integrity capability an
     application needs, you can achieve a similar effect as of MySQL
     Server 4.0 by using multiple-table *Note `DELETE': delete.
     statements to delete rows from many tables with a single
     statement. See *Note delete::.

   * A workaround for the lack of `ON DELETE' is to add the appropriate
     *Note `DELETE': delete. statements to your application when you
     delete records from a table that has a foreign key. In practice,
     this is often as quick as using foreign keys and is more portable.

Be aware that the use of foreign keys can sometimes lead to problems:

   * Foreign key support addresses many referential integrity issues,
     but it is still necessary to design key relationships carefully to
     avoid circular rules or incorrect combinations of cascading
     deletes.

   * It is not uncommon for a DBA to create a topology of relationships
     that makes it difficult to restore individual tables from a
     backup. (MySQL alleviates this difficulty by enabling you to
     temporarily disable foreign key checks when reloading a table that
     depends on other tables. See *Note
     innodb-foreign-key-constraints::. As of MySQL 4.1.1, *Note
     `mysqldump': mysqldump. generates dump files that take advantage
     of this capability automatically when they are reloaded.)

Foreign keys in SQL are used to check and enforce referential
integrity, not to join tables. If you want to get results from multiple
tables from a *Note `SELECT': select.  statement, you do this by
performing a join between them:

     SELECT * FROM t1 INNER JOIN t2 ON t1.id = t2.id;

See *Note join::, and *Note example-foreign-keys::.

The `FOREIGN KEY' syntax without `ON DELETE ...' is often used by ODBC
applications to produce automatic `WHERE' clauses.


File: manual.info,  Node: ansi-diff-comments,  Prev: ansi-diff-foreign-keys,  Up: differences-from-ansi

1.8.5.5 '`--'' as the Start of a Comment
........................................

Standard SQL uses the C syntax `/* this is a comment */' for comments,
and MySQL Server supports this syntax as well. MySQL also support
extensions to this syntax that enable MySQL-specific SQL to be embedded
in the comment, as described in *Note comments::.

Standard SQL uses ``--'' as a start-comment sequence. MySQL Server uses
``#'' as the start comment character. MySQL Server 3.23.3 and up also
supports a variant of the ``--'' comment style.  That is, the ``--''
start-comment sequence must be followed by a space (or by a control
character such as a newline). The space is required to prevent problems
with automatically generated SQL queries that use constructs such as
the following, where we automatically insert the value of the payment
for `payment':

     UPDATE account SET credit=credit-payment

Consider about what happens if `payment' has a negative value such as
`-1':

     UPDATE account SET credit=credit--1

`credit--1' is a valid expression in SQL, but ``--'' is interpreted as
the start of a comment, part of the expression is discarded. The result
is a statement that has a completely different meaning than intended:

     UPDATE account SET credit=credit

The statement produces no change in value at all. This illustrates that
permitting comments to start with ``--'' can have serious consequences.

Using our implementation requires a space following the ``--'' for it
to be recognized as a start-comment sequence in MySQL Server 3.23.3 and
newer.  Therefore, `credit--1' is safe to use.

Another safe feature is that the *Note `mysql': mysql.  command-line
client ignores lines that start with ``--''.

The following information is relevant only if you are running a MySQL
version earlier than 3.23.3:

If you have an SQL script in a text file that contains ``--'' comments,
you should use the *Note `replace': replace-utility. utility as follows
to convert the comments to use ``#'' characters before executing the
script:

     shell> replace " --" " #" < text-file-with-funny-comments.sql \
              | mysql DB_NAME

That is safer than executing the script in the usual way:

     shell> mysql DB_NAME < text-file-with-funny-comments.sql

You can also edit the script file `in place' to change the ``--''
comments to ``#'' comments:

     shell> replace " --" " #" -- text-file-with-funny-comments.sql

Change them back with this command:

     shell> replace " #" " --" -- text-file-with-funny-comments.sql

See *Note replace-utility::.


File: manual.info,  Node: constraints,  Prev: differences-from-ansi,  Up: compatibility

1.8.6 How MySQL Deals with Constraints
--------------------------------------

* Menu:

* constraint-primary-key::       `PRIMARY KEY' and `UNIQUE' Index Constraints
* constraint-foreign-key::       `FOREIGN KEY' Constraints
* constraint-invalid-data::      Constraints on Invalid Data
* constraint-enum::              `ENUM' and `SET' Constraints

MySQL enables you to work both with transactional tables that permit
rollback and with nontransactional tables that do not.  Because of
this, constraint handling is a bit different in MySQL than in other
DBMSs. We must handle the case when you have inserted or updated a lot
of rows in a nontransactional table for which changes cannot be rolled
back when an error occurs.

The basic philosophy is that MySQL Server tries to produce an error for
anything that it can detect while parsing a statement to be executed,
and tries to recover from any errors that occur while executing the
statement. We do this in most cases, but not yet for all.

The options MySQL has when an error occurs are to stop the statement in
the middle or to recover as well as possible from the problem and
continue. By default, the server follows the latter course. This means,
for example, that the server may coerce invalid values to the closest
valid values.

Several SQL mode options are available to provide greater control over
handling of bad data values and whether to continue statement execution
or abort when errors occur. Using these options, you can configure
MySQL Server to act in a more traditional fashion that is like other
DBMSs that reject improper input. The SQL mode can be set globally at
server startup to affect all clients. Individual clients can set the
SQL mode at runtime, which enables each client to select the behavior
most appropriate for its requirements. See *Note server-sql-mode::.

The following sections describe how MySQL Server handles different
types of constraints.


File: manual.info,  Node: constraint-primary-key,  Next: constraint-foreign-key,  Prev: constraints,  Up: constraints

1.8.6.1 `PRIMARY KEY' and `UNIQUE' Index Constraints
....................................................

Normally, errors occurs for data-change statements (such as *Note
`INSERT': insert. or *Note `UPDATE': update.) that would violate
primary-key, unique-key, or foreign-key constraints. If you are using a
transactional storage engine such as `InnoDB', MySQL automatically
rolls back the statement. If you are using a nontransactional storage
engine, MySQL stops processing the statement at the row for which the
error occurred and leaves any remaining rows unprocessed.

MySQL supports an `IGNORE' keyword for *Note `INSERT': insert, *Note
`UPDATE': update, and so forth. If you use it, MySQL ignores
primary-key or unique-key violations and continues processing with the
next row. See the section for the statement that you are using (*Note
insert::, *Note update::, and so forth).

You can get information about the number of rows actually inserted or
updated with the *Note `mysql_info()': mysql-info. C API function.  You
can also use the *Note `SHOW WARNINGS': show-warnings. statement. See
*Note mysql-info::, and *Note show-warnings::.

Currently, only `InnoDB' tables support foreign keys. See *Note
innodb-foreign-key-constraints::.


File: manual.info,  Node: constraint-foreign-key,  Next: constraint-invalid-data,  Prev: constraint-primary-key,  Up: constraints

1.8.6.2 `FOREIGN KEY' Constraints
.................................

Foreign keys let you cross-reference related data across tables, and
foreign key constraints help keep this spread-out data consistent.

MySQL supports `ON UPDATE' and `ON DELETE' foreign key references in
*Note `CREATE TABLE': create-table. and *Note `ALTER TABLE':
alter-table. statements. The available referential actions are
`RESTRICT' (the default), `CASCADE', `SET NULL', and `NO ACTION'.

`SET DEFAULT' is also supported by the MySQL Server but is currently
rejected as invalid by *Note `InnoDB': innodb-storage-engine. Since
MySQL does not support deferred constraint checking, `NO ACTION' is
treated as `RESTRICT'.  For the exact syntax supported by MySQL for
foreign keys, see *Note create-table-foreign-keys::.

`MATCH FULL', `MATCH PARTIAL', and `MATCH SIMPLE' are allowed, but
their use should be avoided, as they cause the MySQL Server to ignore
any `ON DELETE' or `ON UPDATE' clause used in the same statement.
`MATCH' options do not have any other effect in MySQL, which in effect
enforces `MATCH SIMPLE' semantics full-time.

MySQL requires that foreign key columns be indexed; if you create a
table with a foreign key constraint but no index on a given column, an
index is created.

You can obtain information about foreign keys from the *Note
`INFORMATION_SCHEMA.KEY_COLUMN_USAGE': key-column-usage-table.  table.
An example of a query against this table is shown here:

     mysql> SELECT TABLE_SCHEMA, TABLE_NAME, COLUMN_NAME, CONSTRAINT_NAME
          > FROM INFORMATION_SCHEMA.KEY_COLUMN_USAGE
          > WHERE REFERENCED_TABLE_SCHEMA IS NOT NULL;
     +--------------+---------------+-------------+-----------------+
     | TABLE_SCHEMA | TABLE_NAME    | COLUMN_NAME | CONSTRAINT_NAME |
     +--------------+---------------+-------------+-----------------+
     | fk1          | myuser        | myuser_id   | f               |
     | fk1          | product_order | customer_id | f2              |
     | fk1          | product_order | product_id  | f1              |
     +--------------+---------------+-------------+-----------------+
     3 rows in set (0.01 sec)

Information about foreign keys on `InnoDB' tables can also be found in
the `INNODB_SYS_FOREIGN'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-sys-foreign-table.html)
and `INNODB_SYS_FOREIGN_COLS'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-sys-foreign-cols-table.html)
tables, in the `INFORMATION_SCHEMA' database.

Currently, only `InnoDB' tables support foreign keys. See *Note
innodb-foreign-key-constraints::, for information specific to foreign
key support in `InnoDB'.

* Deviations from SQL Standards *

MySQL's implementation of foreign keys differs from the SQL standard in
the following key respects:

   * If there are several rows in the parent table that have the same
     referenced key value, *Note `InnoDB': innodb-storage-engine. acts
     in foreign key checks as if the other parent rows with the same
     key value do not exist. For example, if you have defined a
     `RESTRICT' type constraint, and there is a child row with several
     parent rows, `InnoDB' does not permit the deletion of any of those
     parent rows.

     `InnoDB' performs cascading operations through a depth-first
     algorithm, based on records in the indexes corresponding to the
     foreign key constraints.

   * A `FOREIGN KEY' constraint that references a non-`UNIQUE' key is
     not standard SQL but rather an *Note `InnoDB':
     innodb-storage-engine. extension.

   * If `ON UPDATE CASCADE' or `ON UPDATE SET NULL' recurses to update
     the _same table_ it has previously updated during the same
     cascade, it acts like `RESTRICT'. This means that you cannot use
     self-referential `ON UPDATE CASCADE' or `ON UPDATE SET NULL'
     operations. This is to prevent infinite loops resulting from
     cascaded updates. A self-referential `ON DELETE SET NULL', on the
     other hand, is possible, as is a self-referential `ON DELETE
     CASCADE'.  Cascading operations may not be nested more than 15
     levels deep.

   * In an SQL statement that inserts, deletes, or updates many rows,
     foreign key constraints (like unique constraints) are checked
     row-by-row. When performing foreign key checks, *Note `InnoDB':
     innodb-storage-engine. sets shared row-level locks on child or
     parent records that it must examine. MySQL checks foreign key
     constraints immediately; the check is not deferred to transaction
     commit. According to the SQL standard, the default behavior should
     be deferred checking. That is, constraints are only checked after
     the _entire SQL statement_ has been processed. This means that it
     is not possible to delete a row that refers to itself using a
     foreign key.

For information how *Note `InnoDB': innodb-storage-engine.  foreign
keys differ from the SQL standard, see *Note
innodb-foreign-key-constraints::.


File: manual.info,  Node: constraint-invalid-data,  Next: constraint-enum,  Prev: constraint-foreign-key,  Up: constraints

1.8.6.3 Constraints on Invalid Data
...................................

By default, MySQL is forgiving of invalid or improper data values and
coerces them to valid values for data entry.  However, you can change
the server SQL mode to select more traditional treatment of bad values
such that the server rejects them and aborts the statement in which
they occur. See *Note server-sql-mode::.

This section describes the default (forgiving) behavior of MySQL, as
well as the strict SQL mode and how it differs.

If you are not using strict mode, then whenever you insert an
`incorrect' value into a column, such as a `NULL' into a `NOT NULL'
column or a too-large numeric value into a numeric column, MySQL sets
the column to the `best possible value' instead of producing an error:
The following rules describe in more detail how this works:

   * If you try to store an out of range value into a numeric column,
     MySQL Server instead stores zero, the smallest possible value, or
     the largest possible value, whichever is closest to the invalid
     value.

   * For strings, MySQL stores either the empty string or as much of
     the string as can be stored in the column.

   * If you try to store a string that doesn't start with a number into
     a numeric column, MySQL Server stores 0.

   * Invalid values for *Note `ENUM': enum. and *Note `SET': set.
     columns are handled as described in *Note constraint-enum::.

   * MySQL enables you to store certain incorrect date values into
     *Note `DATE': datetime. and *Note `DATETIME': datetime. columns
     (such as `'2000-02-31'' or `'2000-02-00''). The idea is that it is
     not the job of the SQL server to validate dates. If MySQL can
     store a date value and retrieve exactly the same value, MySQL
     stores it as given. If the date is totally wrong (outside the
     server's ability to store it), the special `zero' date value
     `'0000-00-00'' is stored in the column instead.

   * If you try to store `NULL' into a column that doesn't take `NULL'
     values, an error occurs for single-row *Note `INSERT': insert.
     statements. For multiple-row *Note `INSERT': insert.  statements
     or for *Note `INSERT INTO ... SELECT': insert-select. statements,
     MySQL Server stores the implicit default value for the column data
     type. In general, this is `0' for numeric types, the empty string
     (`''') for string types, and the `zero' value for date and time
     types.  Implicit default values are discussed in *Note
     data-type-defaults::.

   * If an *Note `INSERT': insert. statement specifies no value for a
     column, MySQL inserts its default value if the column definition
     includes an explicit `DEFAULT' clause. If the definition has no
     such `DEFAULT' clause, MySQL inserts the implicit default value
     for the column data type.

The reason for using the preceding rules in nonstrict mode is that we
can't check these conditions until the statement has begun executing.
We can't just roll back if we encounter a problem after updating a few
rows, because the storage engine may not support rollback. The option
of terminating the statement is not that good; in this case, the update
would be `half done,' which is probably the worst possible scenario. In
this case, it is better to `do the best you can' and then continue as
if nothing happened.

In MySQL 5.0.2 and up, you can select stricter treatment of input
values by using the `STRICT_TRANS_TABLES' or `STRICT_ALL_TABLES' SQL
modes:

     SET sql_mode = 'STRICT_TRANS_TABLES';
     SET sql_mode = 'STRICT_ALL_TABLES';

`STRICT_TRANS_TABLES' enables strict mode for transactional storage
engines, and also to some extent for nontransactional engines. It works
like this:

   * For transactional storage engines, bad data values occurring
     anywhere in a statement cause the statement to abort and roll back.

   * For nontransactional storage engines, a statement aborts if the
     error occurs in the first row to be inserted or updated. (When the
     error occurs in the first row, the statement can be aborted to
     leave the table unchanged, just as for a transactional table.)
     Errors in rows after the first do not abort the statement, because
     the table has already been changed by the first row. Instead, bad
     data values are adjusted and result in warnings rather than
     errors. In other words, with `STRICT_TRANS_TABLES', a wrong value
     causes MySQL to roll back all updates done so far, if that can be
     done without changing the table. But once the table has been
     changed, further errors result in adjustments and warnings.

For even stricter checking, enable `STRICT_ALL_TABLES'. This is the
same as `STRICT_TRANS_TABLES' except that for nontransactional storage
engines, errors abort the statement even for bad data in rows following
the first row.  This means that if an error occurs partway through a
multiple-row insert or update for a nontransactional table, a partial
update results. Earlier rows are inserted or updated, but those from
the point of the error on are not. To avoid this for nontransactional
tables, either use single-row statements or else use
`STRICT_TRANS_TABLES' if conversion warnings rather than errors are
acceptable. To avoid problems in the first place, do not use MySQL to
check column content. It is safest (and often faster) to let the
application ensure that it passes only valid values to the database.

With either of the strict mode options, you can cause errors to be
treated as warnings by using *Note `INSERT IGNORE': insert. or `UPDATE
IGNORE' rather than *Note `INSERT': insert. or *Note `UPDATE': update.
without `IGNORE'.


File: manual.info,  Node: constraint-enum,  Prev: constraint-invalid-data,  Up: constraints

1.8.6.4 `ENUM' and `SET' Constraints
....................................

*Note `ENUM': enum. and *Note `SET': set. columns provide an efficient
way to define columns that can contain only a given set of values. See
*Note enum::, and *Note set::. However, before MySQL 5.0.2, *Note
`ENUM': enum. and *Note `SET': set. columns do not provide true
constraints on entry of invalid data:

   * *Note `ENUM': enum. columns always have a default value. If you
     specify no default value, then it is `NULL' for columns that can
     have `NULL', otherwise it is the first enumeration value in the
     column definition.

   * If you insert an incorrect value into an *Note `ENUM': enum.
     column or if you force a value into an *Note `ENUM': enum. column
     with `IGNORE', it is set to the reserved enumeration value of `0',
     which is displayed as an empty string in string context.

   * If you insert an incorrect value into a *Note `SET': set. column,
     the incorrect value is ignored. For example, if the column can
     contain the values `'a'', `'b'', and `'c'', an attempt to assign
     `'a,x,b,y'' results in a value of `'a,b''.

As of MySQL 5.0.2, you can configure the server to use strict SQL mode.
See *Note server-sql-mode::. With strict mode enabled, the definition
of a *Note `ENUM': enum. or *Note `SET': set. column does act as a
constraint on values entered into the column. An error occurs for
values that do not satisfy these conditions:

   * An *Note `ENUM': enum. value must be one of those listed in the
     column definition, or the internal numeric equivalent thereof. The
     value cannot be the error value (that is, 0 or the empty string).
     For a column defined as *Note `ENUM('a','b','c')': enum, values
     such as `''', `'d'', or `'ax'' are invalid and are rejected.

   * A *Note `SET': set. value must be the empty string or a value
     consisting only of the values listed in the column definition
     separated by commas. For a column defined as *Note
     `SET('a','b','c')': set, values such as `'d'' or `'a,b,c,d'' are
     invalid and are rejected.

Errors for invalid values can be suppressed in strict mode if you use
*Note `INSERT IGNORE': insert. or `UPDATE IGNORE'. In this case, a
warning is generated rather than an error. For *Note `ENUM': enum, the
value is inserted as the error member (`0'). For *Note `SET': set, the
value is inserted as given except that any invalid substrings are
deleted. For example, `'a,x,b,y'' results in a value of `'a,b''.


File: manual.info,  Node: credits,  Prev: compatibility,  Up: introduction

1.9 Credits
===========

* Menu:

* contributors::                 Contributors to MySQL
* documenters-translators::      Documenters and translators
* packages::                     Packages that support MySQL
* tools-used-to-create-mysql::   Tools that were used to create MySQL
* supporters::                   Supporters of MySQL

The following sections list developers, contributors, and supporters
that have helped to make MySQL what it is today.


File: manual.info,  Node: contributors,  Next: documenters-translators,  Prev: credits,  Up: credits

1.9.1 Contributors to MySQL
---------------------------

Although Oracle Corporation and/or its affiliates own all copyrights in
the `MySQL server' and the `MySQL manual', we wish to recognize those
who have made contributions of one kind or another to the `MySQL
distribution'. Contributors are listed here, in somewhat random order:

   * Gianmassimo Vigazzola <qwerg@mbox.vol.it> or <qwerg@tin.it>

     The initial port to Win32/NT.

   * Per Eric Olsson

     For constructive criticism and real testing of the dynamic record
     format.

   * Irena Pancirov <irena@mail.yacc.it>

     Win32 port with Borland compiler.  `mysqlshutdown.exe' and
     `mysqlwatch.exe'.

   * David J. Hughes

     For the effort to make a shareware SQL database. At TcX, the
     predecessor of MySQL AB, we started with `mSQL', but found that it
     couldn't satisfy our purposes so instead we wrote an SQL interface
     to our application builder Unireg. *Note `mysqladmin': mysqladmin.
     and *Note `mysql': mysql. client are programs that were largely
     influenced by their `mSQL' counterparts. We have put a lot of
     effort into making the MySQL syntax a superset of `mSQL'. Many of
     the API's ideas are borrowed from `mSQL' to make it easy to port
     free `mSQL' programs to the MySQL API.  The MySQL software doesn't
     contain any code from `mSQL'. Two files in the distribution
     (`client/insert_test.c' and `client/select_test.c') are based on
     the corresponding (noncopyrighted) files in the `mSQL'
     distribution, but are modified as examples showing the changes
     necessary to convert code from `mSQL' to MySQL Server.  (`mSQL' is
     copyrighted David J. Hughes.)

   * Patrick Lynch

     For helping us acquire http://www.mysql.com/.

   * Fred Lindberg

     For setting up qmail to handle the MySQL mailing list and for the
     incredible help we got in managing the MySQL mailing lists.

   * Igor Romanenko <igor@frog.kiev.ua>

     *Note `mysqldump': mysqldump. (previously `msqldump', but ported
     and enhanced by Monty).

   * Yuri Dario

     For keeping up and extending the MySQL OS/2 port.

   * Tim Bunce

     Author of *Note `mysqlhotcopy': mysqlhotcopy.

   * Zarko Mocnik <zarko.mocnik@dem.si>

     Sorting for Slovenian language.

   * "TAMITO" <tommy@valley.ne.jp>

     The `_MB' character set macros and the ujis and sjis character
     sets.

   * Joshua Chamas <joshua@chamas.com>

     Base for concurrent insert, extended date syntax, debugging on NT,
     and answering on the MySQL mailing list.

   * Yves Carlier <Yves.Carlier@rug.ac.be>

     *Note `mysqlaccess': mysqlaccess, a program to show the access
     rights for a user.

   * Rhys Jones <rhys@wales.com> (And GWE Technologies Limited)

     For one of the early JDBC drivers.

   * Dr Xiaokun Kelvin ZHU <X.Zhu@brad.ac.uk>

     Further development of one of the early JDBC drivers and other
     MySQL-related Java tools.

   * James Cooper <pixel@organic.com>

     For setting up a searchable mailing list archive at his site.

   * Rick Mehalick <Rick_Mehalick@i-o.com>

     For `xmysql', a graphical X client for MySQL Server.

   * Doug Sisk <sisk@wix.com>

     For providing RPM packages of MySQL for Red Hat Linux.

   * Diemand Alexander V. <axeld@vial.ethz.ch>

     For providing RPM packages of MySQL for Red Hat Linux-Alpha.

   * Antoni Pamies Olive <toni@readysoft.es>

     For providing RPM versions of a lot of MySQL clients for Intel and
     SPARC.

   * Jay Bloodworth <jay@pathways.sde.state.sc.us>

     For providing RPM versions for MySQL 3.21.

   * David Sacerdote <davids@secnet.com>

     Ideas for secure checking of DNS host names.

   * Wei-Jou Chen <jou@nematic.ieo.nctu.edu.tw>

     Some support for Chinese(BIG5) characters.

   * Wei He <hewei@mail.ied.ac.cn>

     A lot of functionality for the Chinese(GBK) character set.

   * Jan Pazdziora <adelton@fi.muni.cz>

     Czech sorting order.

   * Zeev Suraski <bourbon@netvision.net.il>

     `FROM_UNIXTIME()' time formatting, `ENCRYPT()' functions, and
     `bison' advisor. Active mailing list member.

   * Luuk de Boer <luuk@wxs.nl>

     Ported (and extended) the benchmark suite to `DBI'/`DBD'. Have
     been of great help with `crash-me' and running benchmarks. Some
     new date functions. The *Note `mysql_setpermission':
     mysql-setpermission. script.

   * Alexis Mikhailov <root@medinf.chuvashia.su>

     User-defined functions (UDFs); *Note `CREATE FUNCTION':
     create-function. and *Note `DROP FUNCTION': drop-function.

   * Andreas F. Bobak <bobak@relog.ch>

     The `AGGREGATE' extension to user-defined functions.

   * Ross Wakelin <R.Wakelin@march.co.uk>

     Help to set up InstallShield for MySQL-Win32.

   * Jethro Wright III <jetman@li.net>

     The `libmysql.dll' library.

   * James Pereria <jpereira@iafrica.com>

     Mysqlmanager, a Win32 GUI tool for administering MySQL Servers.

   * Curt Sampson <cjs@portal.ca>

     Porting of MIT-pthreads to NetBSD/Alpha and NetBSD 1.3/i386.

   * Martin Ramsch <m.ramsch@computer.org>

     Examples in the MySQL Tutorial.

   * Steve Harvey

     For making *Note `mysqlaccess': mysqlaccess. more secure.

   * Konark IA-64 Centre of Persistent Systems Private Limited

     `http://www.pspl.co.in/konark/'. Help with the Win64 port of the
     MySQL server.

   * Albert Chin-A-Young.

     Configure updates for Tru64, large file support and better TCP
     wrappers support.

   * John Birrell

     Emulation of `pthread_mutex()' for OS/2.

   * Benjamin Pflugmann

     Extended `MERGE' tables to handle `INSERTS'. Active member on the
     MySQL mailing lists.

   * Jocelyn Fournier

     Excellent spotting and reporting innumerable bugs (especially in
     the MySQL 4.1 subquery code).

   * Marc Liyanage

     Maintaining the Mac OS X packages and providing invaluable
     feedback on how to create Mac OS X packages.

   * Robert Rutherford

     Providing invaluable information and feedback about the QNX port.

   * Previous developers of NDB Cluster

     Lots of people were involved in various ways summer students,
     master thesis students, employees. In total more than 100 people
     so too many to mention here. Notable name is Ataullah Dabaghi who
     up until 1999 contributed around a third of the code base. A
     special thanks also to developers of the AXE system which provided
     much of the architectural foundations for NDB Cluster with blocks,
     signals and crash tracing functionality. Also credit should be
     given to those who believed in the ideas enough to allocate of
     their budgets for its development from 1992 to present time.

   * Google Inc.

     We wish to recognize Google Inc. for contributions to the MySQL
     distribution: Mark Callaghan's SMP Performance patches and other
     patches.

Other contributors, bugfinders, and testers: James H. Thompson,
Maurizio Menghini, Wojciech Tryc, Luca Berra, Zarko Mocnik, Wim Bonis,
Elmar Haneke, <jehamby@lightside>, <psmith@BayNetworks.com>,
<duane@connect.com.au>, Ted Deppner <ted@psyber.com>, Mike Simons,
Jaakko Hyvatti.

And lots of bug report/patches from the folks on the mailing list.

A big tribute goes to those that help us answer questions on the MySQL
mailing lists:

   * Daniel Koch <dkoch@amcity.com>

     Irix setup.

   * Luuk de Boer <luuk@wxs.nl>

     Benchmark questions.

   * Tim Sailer <tps@users.buoy.com>

     `DBD::mysql' questions.

   * Boyd Lynn Gerber <gerberb@zenez.com>

     SCO-related questions.

   * Richard Mehalick <RM186061@shellus.com>

     `xmysql'-related questions and basic installation questions.

   * Zeev Suraski <bourbon@netvision.net.il>

     Apache module configuration questions (log & auth), PHP-related
     questions, SQL syntax-related questions and other general
     questions.

   * Francesc Guasch <frankie@citel.upc.es>

     General questions.

   * Jonathan J Smith <jsmith@wtp.net>

     Questions pertaining to OS-specifics with Linux, SQL syntax, and
     other things that might need some work.

   * David Sklar <sklar@student.net>

     Using MySQL from PHP and Perl.

   * Alistair MacDonald <A.MacDonald@uel.ac.uk>

     Is flexible and can handle Linux and perhaps HP-UX.

   * John Lyon <jlyon@imag.net>

     Questions about installing MySQL on Linux systems, using either
     `.rpm' files or compiling from source.

   * Lorvid Ltd. <lorvid@WOLFENET.com>

     Simple billing/license/support/copyright issues.

   * Patrick Sherrill <patrick@coconet.com>

     ODBC and VisualC++ interface questions.

   * Randy Harmon <rjharmon@uptimecomputers.com>

     `DBD', Linux, some SQL syntax questions.


File: manual.info,  Node: documenters-translators,  Next: packages,  Prev: contributors,  Up: credits

1.9.2 Documenters and translators
---------------------------------

The following people have helped us with writing the MySQL
documentation and translating the documentation or error messages in
MySQL.

   * Paul DuBois

     Ongoing help with making this manual correct and understandable.
     That includes rewriting Monty's and David's attempts at English
     into English as other people know it.

   * Kim Aldale

     Helped to rewrite Monty's and David's early attempts at English
     into English.

   * Michael J. Miller Jr.  <mke@terrapin.turbolift.com>

     For the first MySQL manual. And a lot of spelling/language fixes
     for the FAQ (that turned into the MySQL manual a long time ago).

   * Yan Cailin

     First translator of the MySQL Reference Manual into simplified
     Chinese in early 2000 on which the Big5 and HK coded
     (`http://mysql.hitstar.com/') versions were based. Personal home
     page at linuxdb.yeah.net (http://linuxdb.yeah.net).

   * Jay Flaherty <fty@mediapulse.com>

     Big parts of the Perl `DBI'/`DBD' section in the manual.

   * Paul Southworth <pauls@etext.org>, Ray Loyzaga <yar@cs.su.oz.au>

     Proof-reading of the Reference Manual.

   * Therrien Gilbert <gilbert@ican.net>, Jean-Marc Pouyot
     <jmp@scalaire.fr>

     French error messages.

   * Petr Snajdr, <snajdr@pvt.net>

     Czech error messages.

   * Jaroslaw Lewandowski <jotel@itnet.com.pl>

     Polish error messages.

   * Miguel Angel Fernandez Roiz

     Spanish error messages.

   * Roy-Magne Mo <rmo@www.hivolda.no>

     Norwegian error messages and testing of MySQL 3.21.xx.

   * Timur I. Bakeyev <root@timur.tatarstan.ru>

     Russian error messages.

   * <brenno@dewinter.com> & Filippo Grassilli <phil@hyppo.com>

     Italian error messages.

   * Dirk Munzinger <dirk@trinity.saar.de>

     German error messages.

   * Billik Stefan <billik@sun.uniag.sk>

     Slovak error messages.

   * Stefan Saroiu <tzoompy@cs.washington.edu>

     Romanian error messages.

   * Peter Feher

     Hungarian error messages.

   * Roberto M. Serqueira

     Portuguese error messages.

   * Carsten H. Pedersen

     Danish error messages.

   * Arjen Lentz

     Dutch error messages, completing earlier partial translation (also
     work on consistency and spelling).


File: manual.info,  Node: packages,  Next: tools-used-to-create-mysql,  Prev: documenters-translators,  Up: credits

1.9.3 Packages that support MySQL
---------------------------------

The following is a list of creators/maintainers of some of the most
important API/packages/applications that a lot of people use with MySQL.

We cannot list every possible package here because the list would then
be way to hard to maintain. For other packages, please refer to the
software portal at `http://solutions.mysql.com/software/'.

   * Tim Bunce, Alligator Descartes

     For the `DBD' (Perl) interface.

   * Andreas Koenig <a.koenig@mind.de>

     For the Perl interface for MySQL Server.

   * Jochen Wiedmann <wiedmann@neckar-alb.de>

     For maintaining the Perl `DBD::mysql' module.

   * Eugene Chan <eugene@acenet.com.sg>

     For porting PHP for MySQL Server.

   * Georg Richter

     MySQL 4.1 testing and bug hunting. New PHP 5.0 `mysqli' extension
     (API) for use with MySQL 4.1 and up.

   * Giovanni Maruzzelli <maruzz@matrice.it>

     For porting iODBC (Unix ODBC).

   * Xavier Leroy <Xavier.Leroy@inria.fr>

     The author of LinuxThreads (used by the MySQL Server on Linux).


File: manual.info,  Node: tools-used-to-create-mysql,  Next: supporters,  Prev: packages,  Up: credits

1.9.4 Tools that were used to create MySQL
------------------------------------------

The following is a list of some of the tools we have used to create
MySQL. We use this to express our thanks to those that has created them
as without these we could not have made MySQL what it is today.

   * Free Software Foundation

     From whom we got an excellent compiler (`gcc'), an excellent
     debugger (`gdb' and the `libc' library (from which we have borrowed
     `strto.c' to get some code working in Linux).

   * Free Software Foundation & The XEmacs development team

     For a really great editor/environment.

   * Julian Seward

     Author of `valgrind', an excellent memory checker tool that has
     helped us find a lot of otherwise hard to find bugs in MySQL.

   * Dorothea Lu"tkehaus and Andreas Zeller

     For `DDD' (The Data Display Debugger) which is an excellent
     graphical front end to `gdb').


File: manual.info,  Node: supporters,  Prev: tools-used-to-create-mysql,  Up: credits

1.9.5 Supporters of MySQL
-------------------------

Although Oracle Corporation and/or its affiliates own all copyrights in
the `MySQL server' and the `MySQL manual', we wish to recognize the
following companies, which helped us finance the development of the
`MySQL server', such as by paying us for developing a new feature or
giving us hardware for development of the `MySQL server'.

   * VA Linux / Andover.net

     Funded replication.

   * NuSphere

     Editing of the MySQL manual.

   * Stork Design studio

     The MySQL Web site in use between 1998-2000.

   * Intel

     Contributed to development on Windows and Linux platforms.

   * Compaq

     Contributed to Development on Linux/Alpha.

   * SWSoft

     Development on the embedded *Note `mysqld': mysqld. version.

   * FutureQuest

     The `--skip-show-database' option.


File: manual.info,  Node: installing,  Next: tutorial,  Prev: introduction,  Up: Top

2 Installing and Upgrading MySQL
********************************

* Menu:

* general-installation-issues::  General Installation Guidance
* binary-installation::          Installing MySQL on Unix/Linux Using Generic Binaries
* windows-installation::         Installing MySQL on Microsoft Windows
* macosx-installation::          Installing MySQL on Mac OS X
* linux-installation::           Installing MySQL on Linux
* uln-installation::             Installing MySQL Using Unbreakable Linux Network (ULN)
* solaris-installation::         Installing MySQL on Solaris and OpenSolaris
* hpux-installation::            Installing MySQL on HP-UX
* freebsd-installation::         Installing MySQL on FreeBSD
* source-installation::          Installing MySQL from Source
* postinstallation::             Postinstallation Setup and Testing
* upgrading-downgrading::        Upgrading or Downgrading MySQL
* environment-variables::        Environment Variables
* perl-support::                 Perl Installation Notes

This chapter describes how to obtain and install MySQL. A summary of
the procedure follows and later sections provide the details. If you
plan to upgrade an existing version of MySQL to a newer version rather
than install MySQL for the first time, see *Note upgrading::, for
information about upgrade procedures and about issues that you should
consider before upgrading.

If you are interested in migrating to MySQL from another database
system, you may wish to read *Note faqs-migration::, which contains
answers to some common questions concerning migration issues.

If you are migrating from MySQL Enterprise Edition to MySQL Community
Server, see *Note downgrading-from-enterprise::.

Installation of MySQL generally follows the steps outlined here:

  1. *Determine whether MySQL runs and is supported on your platform.*

     Please note that not all platforms are equally suitable for
     running MySQL, and that not all platforms on which MySQL is known
     to run are officially supported by Oracle Corporation:

  2. *Choose which distribution to install.*

     Several versions of MySQL are available, and most are available in
     several distribution formats. You can choose from pre-packaged
     distributions containing binary (precompiled) programs or source
     code. When in doubt, use a binary distribution. We also provide
     public access to our current source tree for those who want to see
     our most recent developments and help us test new code. To
     determine which version and type of distribution you should use,
     see *Note which-version::.

  3. *Download the distribution that you want to install.*

     For instructions, see *Note getting-mysql::. To verify the
     integrity of the distribution, use the instructions in *Note
     verifying-package-integrity::.

  4. *Install the distribution.*

     To install MySQL from a binary distribution, use the instructions
     in *Note binary-installation::.

     To install MySQL from a source distribution or from the current
     development source tree, use the instructions in *Note
     source-installation::.

  5. *Perform any necessary postinstallation setup.*

     After installing MySQL, see *Note postinstallation:: for
     information about making sure the MySQL server is working
     properly. Also refer to the information provided in *Note
     default-privileges::. This section describes how to secure the
     initial MySQL user accounts, _which have no passwords_ until you
     assign passwords. The section applies whether you install MySQL
     using a binary or source distribution.

  6. If you want to run the MySQL benchmark scripts, Perl support for
     MySQL must be available. See *Note perl-support::.

Instructions for installing MySQL on different platforms and
environments is available on a platform by platform basis:

   * *Unix, Linux, FreeBSD*

     For instructions on installing MySQL on most Linux and Unix
     platforms using a generic binary (for example, a `.tar.gz'
     package), see *Note binary-installation::.

     For information on building MySQL entirely from the source code
     distributions or the source code repositories, see *Note
     source-installation::

     For specific platform help on installation, configuration, and
     building from source see the corresponding platform section:

        * Linux, including notes on distribution specific methods, see
          *Note linux-installation::.

        * Solaris and OpenSolaris, including PKG and IPS formats, see
          *Note solaris-installation::.

        * IBM AIX, see *Note solaris-installation::.

        * Hewlett-Packard HP-UX, including the DEPOT package format,
          see *Note hpux-installation::.

        * FreeBSD, see *Note freebsd-installation::.

   * *Microsoft Windows*

     For instructions on installing MySQL on Microsoft Windows, using
     either a Zipped binary or an MSI package, see *Note
     windows-installation::.

     For information on using the MySQL Server Instance Config Wizard,
     see *Note mysql-config-wizard::.

     For details and instructions on building MySQL from source code
     using Microsoft Visual Studio, see *Note source-installation::.

   * *Mac OS X*

     For installation on Mac OS X, including using both the binary
     package and native PKG formats, see *Note macosx-installation::.

     For information on making use of the MySQL Startup Item to
     automatically start and stop MySQL, see *Note
     macosx-installation-startupitem::.

     For information on the MySQL Preference Pane, see *Note
     macosx-installation-prefpane::.


File: manual.info,  Node: general-installation-issues,  Next: binary-installation,  Prev: installing,  Up: installing

2.1 General Installation Guidance
=================================

* Menu:

* supported-os::                 Operating Systems Supported by MySQL Community Server
* which-version::                Choosing Which MySQL Distribution to Install
* getting-mysql::                How to Get MySQL
* verifying-package-integrity::  Verifying Package Integrity Using MD5 Checksums or `GnuPG'
* installation-layouts::         Installation Layouts
* compiler-characteristics::     Compiler-Specific Build Characteristics

The immediately following sections contain the information necessary to
choose, download, and verify your distribution. The instructions in
later sections of the chapter describe how to install the distribution
that you choose. For binary distributions, see the instructions at
*Note binary-installation:: or the corresponding section for your
platform if available. To build MySQL from source, use the instructions
in *Note source-installation::.


File: manual.info,  Node: supported-os,  Next: which-version,  Prev: general-installation-issues,  Up: general-installation-issues

2.1.1 Operating Systems Supported by MySQL Community Server
-----------------------------------------------------------

This section lists the operating systems on which MySQL Community
Server is known to run.

*Important*:

Oracle Corporation does not necessarily provide official support for
all the platforms listed in this section. For information about those
platforms that are officially supported, see
http://www.mysql.com/support/supportedplatforms/database.html on the
MySQL Web site.

We use `CMake', so it is possible to port MySQL to all modern systems
that have a C++ compiler and a working implementation of POSIX threads.
(Thread support is needed for the server. To compile only the client
code, the only requirement is a C++ compiler.)

MySQL has been reported to compile successfully on the following
systems:

   * FreeBSD 5.x and up. See *Note freebsd-installation::.

   * HP-UX 11.x. See *Note hpux-installation::.

   * Linux. Builds on all recent Linux distributions based on the 2.6
     kernel. See *Note linux-installation::.

   * Mac OS X. See *Note macosx-installation::.

   * Solaris 2.8 on SPARC and x86. See *Note solaris-installation::.

   * Microsoft Windows. See *Note windows-installation::.

MySQL has also been known to run on other systems in the past. See
*Note general-installation-issues::. Some porting effort might be
required for current versions of MySQL on these systems.

Not all platforms are equally well-suited for running MySQL. How well a
certain platform is suited for a high-load mission-critical MySQL
server is determined by the following factors:

   * General stability of the thread library. A platform may have an
     excellent reputation otherwise, but MySQL is only as stable as the
     thread library it calls, even if everything else is perfect.

   * The capability of the kernel and the thread library to take
     advantage of symmetric multi-processor (SMP) systems. In other
     words, when a process creates a thread, it should be possible for
     that thread to run on a CPU different from the original process.

   * The capability of the kernel and the thread library to run many
     threads that acquire and release a mutex over a short critical
     region frequently without excessive context switches.  If the
     implementation of `pthread_mutex_lock()' is too anxious to yield
     CPU time, this hurts MySQL tremendously. If this issue is not
     taken care of, adding extra CPUs actually makes MySQL slower.

   * General file system stability and performance.

   * Table size. If your tables are large, performance is affected by
     the ability of the file system to deal with large files and
     dealing with them efficiently.

   * Our level of expertise here at Oracle Corporation with the
     platform. If we know a platform well, we enable platform-specific
     optimizations and fixes at compile time. We can also provide
     advice on configuring your system optimally for MySQL.

   * The amount of testing we have done internally for similar
     configurations.

   * The number of users that have run MySQL successfully on the
     platform in similar configurations. If this number is high, the
     likelihood of encountering platform-specific surprises is much
     smaller.


File: manual.info,  Node: which-version,  Next: getting-mysql,  Prev: supported-os,  Up: general-installation-issues

2.1.2 Choosing Which MySQL Distribution to Install
--------------------------------------------------

* Menu:

* choosing-version::             Choosing Which Version of MySQL to Install
* choosing-distribution-format::  Choosing a Distribution Format
* many-versions::                How and When Updates Are Released

When preparing to install MySQL, you should decide which version to
use. MySQL development occurs in several release series, and you can
pick the one that best fits your needs. After deciding which version to
install, you can choose a distribution format.  Releases are available
in binary or source format.


File: manual.info,  Node: choosing-version,  Next: choosing-distribution-format,  Prev: which-version,  Up: which-version

2.1.2.1 Choosing Which Version of MySQL to Install
..................................................

The first decision to make is whether you want to use a production
(stable) release or a development release. In the MySQL development
process, multiple release series co-exist, each at a different stage of
maturity.

* Production Releases *
   * MySQL 5.6: Latest General Availability (Production) release

   * MySQL 5.5: Previous General Availability (Production) release

   * MySQL 5.1: Older General Availability (Production) release

   * MySQL 5.0: Older Production release nearing the end of the product
     lifecycle

MySQL 4.1, 4.0, and 3.23 are old releases that are no longer supported.

See http://www.mysql.com/about/legal/lifecycle/ for information about
support policies and schedules.

Normally, if you are beginning to use MySQL for the first time or
trying to port it to some system for which there is no binary
distribution, use the most recent General Availability series listed in
the preceding descriptions. All MySQL releases, even those from
development series, are checked with the MySQL benchmarks and an
extensive test suite before being issued.

If you are running an older system and want to upgrade, but do not want
to take the chance of having a nonseamless upgrade, you should upgrade
to the latest version in the same release series you are using (where
only the last part of the version number is newer than yours). We have
tried to fix only fatal bugs and make only small, relatively `safe'
changes to that version.

If you want to use new features not present in the production release
series, you can use a version from a development series.  Be aware that
development releases are not as stable as production releases.

We do not use a complete code freeze because this prevents us from
making bugfixes and other fixes that must be done. We may add small
things that should not affect anything that currently works in a
production release. Naturally, relevant bugfixes from an earlier series
propagate to later series.

If you want to use the very latest sources containing all current
patches and bugfixes, you can use one of our source code repositories
(see *Note installing-development-tree::). These are not `releases' as
such, but are available as previews of the code on which future
releases are to be based.

The naming scheme in MySQL 5.5 uses release names that consist of three
numbers and a suffix; for example, *mysql-5.5.6-m3*. The numbers within
the release name are interpreted as follows:

   * The first number (*5*) is the major version and describes the file
     format. All MySQL 5 releases have the same file format.

   * The second number (*5*) is the release level. Taken together, the
     major version and release level constitute the release series
     number.

   * The third number (*6*) is the version number within the release
     series. This is incremented for each new release. Usually you want
     the latest version for the series you have chosen.

For each minor update, the last number in the version string is
incremented. When there are major new features or minor
incompatibilities with previous versions, the second number in the
version string is incremented. When the file format changes, the first
number is increased.

Release names also include a suffix to indicates the stability level of
the release. Releases within a series progress through a set of
suffixes to indicate how the stability level improves.  The possible
suffixes are:

   * *m_N_* (for example, *m1*, *m2*, *m3*, ...) indicate a milestone
     number. MySQL development uses a milestone model, in which each
     milestone proceeds through a small number of versions with a tight
     focus on a small subset of thoroughly tested features. Following
     the releases for one milestone, development proceeds with another
     small number of releases that focuses on the next small set of
     features, also thoroughly tested. Features within milestone
     releases may be considered to be of pre-production quality.

   * *rc* indicates a Release Candidate. Release candidates are
     believed to be stable, having passed all of MySQL's internal
     testing, and with all known fatal runtime bugs fixed. However, the
     release has not been in widespread use long enough to know for
     sure that all bugs have been identified. Only minor fixes are
     added.

   * If there is no suffix, it indicates that the release is a General
     Availability (GA) or Production release. GA releases are stable,
     having successfully passed through all earlier release stages and
     are believed to be reliable, free of serious bugs, and suitable
     for use in production systems.  Only critical bugfixes are applied
     to the release.

All releases of MySQL are run through our standard tests and benchmarks
to ensure that they are relatively safe to use.  Because the standard
tests are extended over time to check for all previously found bugs,
the test suite keeps getting better.

All releases have been tested at least with these tools:

   * An internal test suite

     The `mysql-test' directory contains an extensive set of test
     cases. We run these tests for every server binary. See *Note
     mysql-test-suite::, for more information about this test suite.

   * The MySQL benchmark suite

     This suite runs a range of common queries. It is also a test to
     determine whether the latest batch of optimizations actually made
     the code faster. See *Note mysql-benchmarks::.

We also perform additional integration and nonfunctional testing of the
latest MySQL version in our internal production environment.
Integration testing is done with different connectors, storage engines,
replication modes, backup, partitioning, stored programs, and so forth
in various combinations. Additional nonfunctional testing is done in
areas of performance, concurrency, stress, high volume, upgrade and
downgrade.


File: manual.info,  Node: choosing-distribution-format,  Next: many-versions,  Prev: choosing-version,  Up: which-version

2.1.2.2 Choosing a Distribution Format
......................................

After choosing which version of MySQL to install, you should decide
whether to use a binary distribution or a source distribution. In most
cases, you should probably use a binary distribution, if one exists for
your platform. Binary distributions are available in native format for
many platforms, such as RPM packages for Linux, DMG packages for Mac OS
X, and PKG packages for Solaris. Distributions are also available in
more generic formats such as Zip archives or compressed `tar' files.

Reasons to choose a binary distribution include the following:

   * Binary distributions generally are easier to install than source
     distributions.

   * To satisfy different user requirements, we provide several servers
     in binary distributions. *Note `mysqld': mysqld.  is an optimized
     server that is a smaller, faster binary.  *Note `mysqld-debug':
     mysqld. is compiled with debugging support.

     Each of these servers is compiled from the same source
     distribution, though with different configuration options.  All
     native MySQL clients can connect to servers from either MySQL
     version.

Under some circumstances, you may be better off installing MySQL from a
source distribution:

   * You want to install MySQL at some explicit location. The standard
     binary distributions are ready to run at any installation
     location, but you might require even more flexibility to place
     MySQL components where you want.

   * You want to configure *Note `mysqld': mysqld. to ensure that
     features are available that might not be included in the standard
     binary distributions. Here is a list of the most common extra
     options that you may want to use to ensure feature availability:

        * `-DWITH_LIBWRAP=1' for TCP wrappers support.

        * `-DWITH_ZLIB={system|bundled}' for features that depend on
          compression

        * `-DWITH_DEBUG=1' for debugging support

     For additional information, see *Note
     source-configuration-options::.

   * You want to configure *Note `mysqld': mysqld. without some
     features that are included in the standard binary distributions.
     For example, distributions normally are compiled with support for
     all character sets. If you want a smaller MySQL server, you can
     recompile it with support for only the character sets you need.

   * You want to use the latest sources from one of the Bazaar
     repositories to have access to all current bugfixes. For example,
     if you have found a bug and reported it to the MySQL development
     team, the bugfix is committed to the source repository and you can
     access it there. The bugfix does not appear in a release until a
     release actually is issued.

   * You want to read (or modify) the C and C++ code that makes up
     MySQL. For this purpose, you should get a source distribution,
     because the source code is always the ultimate manual.

   * Source distributions contain more tests and examples than binary
     distributions.


File: manual.info,  Node: many-versions,  Prev: choosing-distribution-format,  Up: which-version

2.1.2.3 How and When Updates Are Released
.........................................

MySQL is evolving quite rapidly and we want to share new developments
with other MySQL users. We try to produce a new release whenever we
have new and useful features that others also seem to have a need for.

We also try to help users who request features that are easy to
implement. We take note of what our licensed users want, and we
especially take note of what our support customers want and try to help
them in this regard.

No one is _required_ to download a new release. The Release Notes
(http://dev.mysql.com/doc/relnotes/mysql/5.5/en/) help you determine
whether the new release has something you really want.

We use the following policy when updating MySQL:

   * Enterprise Server releases are meant to appear every 18 months,
     supplemented by quarterly service packs and monthly rapid updates.
     Community Server releases are meant to appear 2 to 3 times per
     year.

   * Releases are issued within each series. For each release, the last
     number in the version is one more than the previous release within
     the same series.

   * Binary distributions for some platforms are made by us for major
     releases. Other people may make binary distributions for other
     systems, but probably less frequently.

   * We make fixes available as soon as we have identified and
     corrected small or noncritical but annoying bugs. The fixes are
     available in source form immediately from our public Bazaar
     repositories, and are included in the next release.

   * If by any chance a security vulnerability or critical bug is found
     in a release, our policy is to fix it in a new release as soon as
     possible. (We would like other companies to do this, too!)


File: manual.info,  Node: getting-mysql,  Next: verifying-package-integrity,  Prev: which-version,  Up: general-installation-issues

2.1.3 How to Get MySQL
----------------------

Check our downloads page at `http://dev.mysql.com/downloads/' for
information about the current version of MySQL and for downloading
instructions. For a complete up-to-date list of MySQL download mirror
sites, see `http://dev.mysql.com/downloads/mirrors.html'. You can also
find information there about becoming a MySQL mirror site and how to
report a bad or out-of-date mirror.

To obtain the latest development source, see *Note
installing-development-tree::.


File: manual.info,  Node: verifying-package-integrity,  Next: installation-layouts,  Prev: getting-mysql,  Up: general-installation-issues

2.1.4 Verifying Package Integrity Using MD5 Checksums or `GnuPG'
----------------------------------------------------------------

* Menu:

* verifying-md5-checksum::       Verifying the MD5 Checksum
* checking-gpg-signature::       Signature Checking Using `GnuPG'
* checking-gpg-signature-windows::  Signature Checking Using `Gpg4win' for Windows
* checking-rpm-signature::       Signature Checking Using `RPM'

After you have downloaded the MySQL package that suits your needs and
before you attempt to install it, you should make sure that it is
intact and has not been tampered with. There are three means of
integrity checking:

   * MD5 checksums

   * Cryptographic signatures using `GnuPG', the GNU Privacy Guard

   * For RPM packages, the built-in RPM integrity verification mechanism

The following sections describe how to use these methods.

If you notice that the MD5 checksum or GPG signatures do not match,
first try to download the respective package one more time, perhaps
from another mirror site.


File: manual.info,  Node: verifying-md5-checksum,  Next: checking-gpg-signature,  Prev: verifying-package-integrity,  Up: verifying-package-integrity

2.1.4.1 Verifying the MD5 Checksum
..................................

After you have downloaded a MySQL package, you should make sure that
its MD5 checksum matches the one provided on the MySQL download pages.
Each package has an individual checksum that you can verify against the
package that you downloaded. The correct MD5 checksum is listed on the
downloads page for each MySQL product, and you will compare it against
the MD5 checksum of the file (product) that you download.

Each operating system and setup offers its own version of tools for
checking the MD5 checksum. Typically the command is named `md5sum', or
it may be named `md5', and some operating systems do not ship it at
all. On Linux, it is part of the *GNU Text Utilities* package, which is
available for a wide range of platforms. You can also download the
source code from `http://www.gnu.org/software/textutils/'. If you have
OpenSSL installed, you can use the command `openssl md5 PACKAGE_NAME'
instead. A Windows implementation of the `md5' command line utility is
available from `http://www.fourmilab.ch/md5/'.  `winMd5Sum' is a
graphical MD5 checking tool that can be obtained from
`http://www.nullriver.com/index/products/winmd5sum'.  Our Microsoft
Windows examples will assume the name `md5.exe'.

Linux and Microsoft Windows examples:

     shell> md5sum mysql-standard-5.5.35-linux-i686.tar.gz
     aaab65abbec64d5e907dcd41b8699945  mysql-standard-5.5.35-linux-i686.tar.gz

     shell> md5.exe mysql-installer-community-5.5.35.msi
     aaab65abbec64d5e907dcd41b8699945  mysql-installer-community-5.5.35.msi

You should verify that the resulting checksum (the string of
hexadecimal digits) matches the one displayed on the download page
immediately below the respective package.

*Note*:

Make sure to verify the checksum of the _archive file_ (for example,
the `.zip', `.tar.gz', or `.msi' file) and not of the files that are
contained inside of the archive. In other words, verify the file before
extracting its contents.


File: manual.info,  Node: checking-gpg-signature,  Next: checking-gpg-signature-windows,  Prev: verifying-md5-checksum,  Up: verifying-package-integrity

2.1.4.2 Signature Checking Using `GnuPG'
........................................

Another method of verifying the integrity and authenticity of a package
is to use cryptographic signatures. This is more reliable than using
*Note MD5 checksums: verifying-md5-checksum, but requires more work.

We sign MySQL downloadable packages with `GnuPG' (GNU Privacy Guard).
`GnuPG' is an Open Source alternative to the well-known Pretty Good
Privacy (`PGP') by Phil Zimmermann. See `http://www.gnupg.org/' for more
information about `GnuPG' and how to obtain and install it on your
system. Most Linux distributions ship with `GnuPG' installed by
default. For more information about `GnuPG', see
`http://www.openpgp.org/'.

To verify the signature for a specific package, you first need to
obtain a copy of our public GPG build key, which you can download from
`http://pgp.mit.edu/'. The key that you want to obtain is named
`mysql-build@oss.oracle.com'. Alternatively, you can cut and paste the
key directly from the following text:

     -----BEGIN PGP PUBLIC KEY BLOCK-----
     Version: PGP Universal 2.9.1 (Build 347)

     mQGiBD4+owwRBAC14GIfUfCyEDSIePvEW3SAFUdJBtoQHH/nJKZyQT7h9bPlUWC3
     RODjQReyCITRrdwyrKUGku2FmeVGwn2u2WmDMNABLnpprWPkBdCk96+OmSLN9brZ
     fw2vOUgCmYv2hW0hyDHuvYlQA/BThQoADgj8AW6/0Lo7V1W9/8VuHP0gQwCgvzV3
     BqOxRznNCRCRxAuAuVztHRcEAJooQK1+iSiunZMYD1WufeXfshc57S/+yeJkegNW
     hxwR9pRWVArNYJdDRT+rf2RUe3vpquKNQU/hnEIUHJRQqYHo8gTxvxXNQc7fJYLV
     K2HtkrPbP72vwsEKMYhhr0eKCbtLGfls9krjJ6sBgACyP/Vb7hiPwxh6rDZ7ITnE
     kYpXBACmWpP8NJTkamEnPCia2ZoOHODANwpUkP43I7jsDmgtobZX9qnrAXw+uNDI
     QJEXM6FSbi0LLtZciNlYsafwAPEOMDKpMqAK6IyisNtPvaLd8lH0bPAnWqcyefep
     rv0sxxqUEMcM3o7wwgfN83POkDasDbs3pjwPhxvhz6//62zQJ7Q2TXlTUUwgUmVs
     ZWFzZSBFbmdpbmVlcmluZyA8bXlzcWwtYnVpbGRAb3NzLm9yYWNsZS5jb20+iGYE
     ExECACYCGyMGCwkIBwMCBBUCCAMEFgIDAQIeAQIXgAUCTnc+KgUJE/sCFQAKCRCM
     cY07UHLh9SbMAJ4l1+qBz2BZNSGCZwwA6YbhGPC7FwCgp8z5TzIw4YQuL5NGJ/sy
     0oSazqmJASIEEAECAAwFAk53QS4FAwASdQAACgkQlxC4m8pXrXwJ8Qf/be/UO9mq
     foc2sMyhwMpN4/fdBWwfLkA12FXQDOQMvwH9HsmEjnfUgYKXschZRi+DuHXe1P7l
     8G2aQLubhBsQf9ejKvRFTzuWMQkdIq+6Koulxv6ofkCcv3d1xtO2W7nb5yxcpVBP
     rRfGFGebJvZa58DymCNgyGtAU6AOz4veavNmI2+GIDQsY66+tYDvZ+CxwzdYu+HD
     V9HmrJfc6deM0mnBn7SRjqzxJPgoTQhihTav6q/R5/2p5NvQ/H84OgS6GjosfGc2
     duUDzCP/kheMRKfzuyKCOHQPtJuIj8++gfpHtEU7IDUX1So3c9n0PdpeBvclsDbp
     RnCNxQWU4mBot7kCDQQ+PqMdEAgA7+GJfxbMdY4wslPnjH9rF4N2qfWsEN/lxaZo
     JYc3a6M02WCnHl6ahT2/tBK2w1QI4YFteR47gCvtgb6O1JHffOo2HfLmRDRiRjd1
     DTCHqeyX7CHhcghj/dNRlW2Z0l5QFEcmV9U0Vhp3aFfWC4Ujfs3LU+hkAWzE7zaD
     5cH9J7yv/6xuZVw411x0h4UqsTcWMu0iM1BzELqX1DY7LwoPEb/O9Rkbf4fmLe11
     EzIaCa4PqARXQZc4dhSinMt6K3X4BrRsKTfozBu74F47D8Ilbf5vSYHbuE5p/1oI
     Dznkg/p8kW+3FxuWrycciqFTcNz215yyX39LXFnlLzKUb/F5GwADBQf+Lwqqa8CG
     rRfsOAJxim63CHfty5mUc5rUSnTslGYEIOCR1BeQauyPZbPDsDD9MZ1ZaSafanFv
     wFG6Llx9xkU7tzq+vKLoWkm4u5xf3vn55VjnSd1aQ9eQnUcXiL4cnBGoTbOWI39E
     cyzgslzBdC++MPjcQTcA7p6JUVsP6oAB3FQWg54tuUo0Ec8bsM8b3Ev42LmuQT5N
     dKHGwHsXTPtl0klk4bQk4OajHsiy1BMahpT27jWjJlMiJc+IWJ0mghkKHt926s/y
     mfdf5HkdQ1cyvsz5tryVI3Fx78XeSYfQvuuwqp2H139pXGEkg0n6KdUOetdZWhe7
     0YGNPw1yjWJT1IhUBBgRAgAMBQJOdz3tBQkT+wG4ABIHZUdQRwABAQkQjHGNO1By
     4fUUmwCbBYr2+bBEn/L2BOcnw9Z/QFWuhRMAoKVgCFm5fadQ3Afi+UQlAcOphrnJ
     =Eto8
     -----END PGP PUBLIC KEY BLOCK-----

To import the build key into your personal public GPG keyring, use `gpg
--import'. For example, if you have saved the key in a file named
`mysql_pubkey.asc', the import command looks like this:

     shell> gpg --import mysql_pubkey.asc
     gpg: key 5072E1F5: public key "MySQL Release Engineering
     <mysql-build@oss.oracle.com>" imported
     gpg: Total number processed: 1
     gpg:               imported: 1
     gpg: no ultimately trusted keys found

You can also download the key from the public keyserver using the
public key id, `5072E1F5':

     shell> gpg --recv-keys 5072E1F5
     gpg: requesting key 5072E1F5 from hkp server keys.gnupg.net
     gpg: key 5072E1F5: "MySQL Release Engineering <mysql-build@oss.oracle.com>"
     1 new user ID
     gpg: key 5072E1F5: "MySQL Release Engineering <mysql-build@oss.oracle.com>"
     53 new signatures
     gpg: no ultimately trusted keys found
     gpg: Total number processed: 1
     gpg:           new user IDs: 1
     gpg:         new signatures: 53

If you want to import the key into your RPM configuration to validate
RPM install packages, you should be able to import the key directly:

     shell> rpm --import mysql_pubkey.asc

If you experience problems or require RPM specific information, see
*Note checking-rpm-signature::.

After you have downloaded and imported the public build key, download
your desired MySQL package and the corresponding signature, which also
is available from the download page. The signature file has the same
name as the distribution file with an `.asc' extension, as shown by the
examples in the following table.

*MySQL Package and Signature Files for Source files*

File Type          File Name
Distribution file  `mysql-standard-5.5.35-linux-i686.tar.gz'
Signature file     `mysql-standard-5.5.35-linux-i686.tar.gz.asc'

Make sure that both files are stored in the same directory and then run
the following command to verify the signature for the distribution file:

     shell> gpg --verify PACKAGE_NAME.asc

If the downloaded package is valid, you will see a "Good signature"
similar to:

     shell> gpg --verify mysql-standard-5.5.35-linux-i686.tar.gz.asc
     gpg: Signature made Tue 01 Feb 2011 02:38:30 AM CST using DSA key ID 5072E1F5
     gpg: Good signature from "MySQL Release Engineering <mysql-build@oss.oracle.com>"

The `Good signature' message indicates that the file signature is
valid, when compared to the signature listed on our site. But you might
also see warnings, like so:

     shell> gpg --verify mysql-standard-5.5.35-linux-i686.tar.gz.asc
     gpg: Signature made Wed 23 Jan 2013 02:25:45 AM PST using DSA key ID 5072E1F5
     gpg: checking the trustdb
     gpg: no ultimately trusted keys found
     gpg: Good signature from "MySQL Release Engineering <mysql-build@oss.oracle.com>"
     gpg: WARNING: This key is not certified with a trusted signature!
     gpg:          There is no indication that the signature belongs to the owner.
     Primary key fingerprint: A4A9 4068 76FC BD3C 4567  70C8 8C71 8D3B 5072 E1F5

That is normal, as they depend on your setup and configuration.  Here
are explanations for these warnings:

   * _gpg: no ultimately trusted keys found_: This means that the
     specific key is not "ultimately trusted" by you or your web of
     trust, which is okay for the purposes of verifying file signatures.

   * _WARNING: This key is not certified with a trusted signature!
     There is no indication that the signature belongs to the owner._:
     This refers to your level of trust in your belief that you possess
     our real public key. This is a personal decision. Ideally, a MySQL
     developer would hand you the key in person, but more commonly, you
     downloaded it.  Was the download tampered with? Probably not, but
     this decision is up to you. Setting up a web of trust is one
     method for trusting them.

See the GPG documentation for more information on how to work with
public keys.


File: manual.info,  Node: checking-gpg-signature-windows,  Next: checking-rpm-signature,  Prev: checking-gpg-signature,  Up: verifying-package-integrity

2.1.4.3 Signature Checking Using `Gpg4win' for Windows
......................................................

The *Note checking-gpg-signature:: section describes how to verify
MySQL downloads using GPG. That guide also applies to Microsoft
Windows, but another option is to use a GUI tool like Gpg4win
(http://www.gpg4win.org/). You may use a different tool but our
examples are based on Gpg4win, and utilize its bundled `Kleopatra' GUI.

Download and install Gpg4win, and then load Kleopatra. The dialog
should look similar to:

FIGURE GOES HERE: Initial screen after loading Kleopatra

Next, add the MySQL Release Engineering certificate. Do this by
clicking `File', `Lookup Certificates on Server'. Type "Mysql Release
Engineering" into the search box and press `Search'.

FIGURE GOES HERE: Finding the MySQL Release Engineering certificate

Select the "MySQL Release Engineering" certificate. The Fingerprint and
Key-ID must be "5072E1F5", or choose `Details...' to confirm the
certificate is valid. Now, import it by clicking `Import'.  An import
dialog will be displayed, choose `Okay', and this certificate will now
be listed under the `Imported Certificates' tab.

Next, configure the trust level for our certificate. Select our
certificate, then from the main menu select `Certificates', `Change
Owner Trust...'. We suggest choosing `I believe checks are very
accurate' for our certificate, as otherwise you might not be able to
verify our signature. Select `I believe checks are very accurate' and
then press `OK'.

FIGURE GOES HERE: Changing the Trust level

Next, verify the downloaded MySQL package file. This requires files for
both the packaged file, and the signature. The signature file must have
the same name as the packaged file but with an appended `.asc'
extension, as shown by the example in the following table. The
signature is linked to on the downloads page for each MySQL product.
You must create the `.asc' file with this signature.

*MySQL Package and Signature Files for MySQL Installer for Microsoft
Windows*

File Type          File Name
Distribution file  `mysql-installer-community-5.5.35.msi'
Signature file     `mysql-installer-community-5.5.35.msi.asc'

Make sure that both files are stored in the same directory and then run
the following command to verify the signature for the distribution
file. Either drag and drop the signature (`.asc') file into Kleopatra,
or load the dialog from `File', `Decrypt/Verify Files...', and then
choose either the `.msi' or `.asc' file.

FIGURE GOES HERE: The Decrypt/Verify Files dialog

Click `Decrypt/Verify' to check the file.  The two most common results
will look like the following, and although the yellow warning looks
problematic, the following means that the file check passed with
success. You may now run this installer.

FIGURE GOES HERE: The Decrypt/Verify Results: Good

Seeing a red "The signature is bad" error means the file is invalid. Do
not execute the MSI file if you see this error.

FIGURE GOES HERE: The Decrypt/Verify Results: Bad

The *Note checking-gpg-signature:: section explains why you probably
don't see a green `Good signature' result.


File: manual.info,  Node: checking-rpm-signature,  Prev: checking-gpg-signature-windows,  Up: verifying-package-integrity

2.1.4.4 Signature Checking Using `RPM'
......................................

For RPM packages, there is no separate signature. RPM packages have a
built-in GPG signature and MD5 checksum. You can verify a package by
running the following command:

     shell> rpm --checksig PACKAGE_NAME.rpm

Example:

     shell> rpm --checksig MySQL-server-5.5.35-0.glibc23.i386.rpm
     MySQL-server-5.5.35-0.glibc23.i386.rpm: md5 gpg OK

*Note*:

If you are using RPM 4.1 and it complains about `(GPG) NOT OK (MISSING
KEYS: GPG#5072e1f5)', even though you have imported the MySQL public
build key into your own GPG keyring, you need to import the key into
the RPM keyring first. RPM 4.1 no longer uses your personal GPG keyring
(or GPG itself). Rather, RPM maintains a separate keyring because it is
a system-wide application and a user's GPG public keyring is a
user-specific file. To import the MySQL public key into the RPM
keyring, first obtain the key, then use `rpm --import' to import the
key. For example:

     shell> gpg --export -a 5072e1f5 > 5072e1f5.asc
     shell> rpm --import 5072e1f5.asc

Alternatively, `rpm' also supports loading the key directly from a URL,
and you can use this manual page:

     shell> rpm --import http://dev.mysql.com/doc/refman/5.5/en/checking-gpg-signature.html

If you need to obtain the MySQL public key, see *Note
checking-gpg-signature::.


File: manual.info,  Node: installation-layouts,  Next: compiler-characteristics,  Prev: verifying-package-integrity,  Up: general-installation-issues

2.1.5 Installation Layouts
--------------------------

The installation layout differs for different installation types (for
example, native packages, binary tarballs, and source tarballs), which
can lead to confusion when managing different systems or using
different installation sources. The individual layouts are given in the
corresponding installation type or platform chapter, as described
following. Note that the layout of installations from vendors other
than Oracle may differ from these layouts.

   * *Note windows-installation-layout::

   * *Note source-installation-layout::

   * *Note binary-installation-layout::

   * *Note mysql-installation-layout-linuxrpm::

   * *Note mysql-installation-layout-macosx::


File: manual.info,  Node: compiler-characteristics,  Prev: installation-layouts,  Up: general-installation-issues

2.1.6 Compiler-Specific Build Characteristics
---------------------------------------------

In some cases, the compiler used to build MySQL affects the features
available for use. The notes in this section apply for binary
distributions provided by Oracle Corporation or that you compile
yourself from source.

*`icc' (Intel C++ Compiler) Builds*

A server built with `icc' has these characteristics:

   * SSL support is not included.


File: manual.info,  Node: binary-installation,  Next: windows-installation,  Prev: general-installation-issues,  Up: installing

2.2 Installing MySQL on Unix/Linux Using Generic Binaries
=========================================================

Oracle provides a set of binary distributions of MySQL. These include
binary distributions in the form of compressed `tar' files (files with a
`.tar.gz' extension) for a number of platforms, as well as binaries in
platform-specific package formats for selected platforms.

This section covers the installation of MySQL from a compressed `tar'
file binary distribution. For other platform-specific package formats,
see the other platform-specific sections. For example, for Windows
distributions, see *Note windows-installation::.

To obtain MySQL, see *Note getting-mysql::.

MySQL compressed `tar' file binary distributions have names of the form
`mysql-VERSION-OS.tar.gz', where `VERSION' is a number (for example,
`5.5.35'), and OS indicates the type of operating system for which the
distribution is intended (for example, `pc-linux-i686' or `winx64').

To install MySQL from a compressed `tar' file binary distribution, your
system must have GNU `gunzip' to uncompress the distribution and a
reasonable `tar' to unpack it. If your `tar' program supports the `z'
option, it can both uncompress and unpack the file.

GNU `tar' is known to work. The standard `tar' provided with some
operating systems is not able to unpack the long file names in the
MySQL distribution. You should download and install GNU `tar', or if
available, use a preinstalled version of GNU tar. Usually this is
available as `gnutar', `gtar', or as `tar' within a GNU or Free
Software directory, such as `/usr/sfw/bin' or `/usr/local/bin'. GNU
`tar' is available from `http://www.gnu.org/software/tar/'.

*Warning*:

If you have previously installed MySQL using your operating system
native package management system, such as `yum' or `apt-get', you may
experience problems installing using a native binary. Make sure your
previous MySQL previous installation has been removed entirely (using
your package management system), and that any additional files, such as
old versions of your data files, have also been removed. You should
also check the existence of configuration files such as `/etc/my.cnf'
or the `/etc/mysql' directory have been deleted.

If you run into problems and need to file a bug report, please use the
instructions in *Note bug-reports::.

On Unix, to install a compressed `tar' file binary distribution, unpack
it at the installation location you choose (typically
`/usr/local/mysql'). This creates the directories shown in the
following table.

*MySQL Installation Layout for Generic Unix/Linux Binary Package*

Directory                        Contents of Directory
`bin'                            Client programs and the *Note `mysqld':
                                 mysqld. server
`data'                           Log files, databases
`docs'                           Manual in Info format
`man'                            Unix manual pages
`include'                        Include (header) files
`lib'                            Libraries
`scripts'                        *Note `mysql_install_db':
                                 mysql-install-db.
`share'                          Miscellaneous support files, including
                                 error messages, sample configuration
                                 files, SQL for database installation
`sql-bench'                      Benchmarks

Debug versions of the *Note `mysqld': mysqld. binary are available as
*Note `mysqld-debug': mysqld. To compile your own debug version of
MySQL from a source distribution, use the appropriate configuration
options to enable debugging support. For more information on compiling
from source, see *Note source-installation::.

To install and use a MySQL binary distribution, the basic command
sequence looks like this:

     shell> groupadd mysql
     shell> useradd -r -g mysql mysql
     shell> cd /usr/local
     shell> tar zxvf /PATH/TO/MYSQL-VERSION-OS.tar.gz
     shell> ln -s FULL-PATH-TO-MYSQL-VERSION-OS mysql
     shell> cd mysql
     shell> chown -R mysql .
     shell> chgrp -R mysql .
     shell> scripts/mysql_install_db --user=mysql
     shell> chown -R root .
     shell> chown -R mysql data
     # Next command is optional
     shell> cp support-files/my-medium.cnf /etc/my.cnf
     shell> bin/mysqld_safe --user=mysql &
     # Next command is optional
     shell> cp support-files/mysql.server /etc/init.d/mysql.server

A more detailed version of the preceding description for installing a
binary distribution follows.

*Note*:

This procedure assumes that you have `root' (administrator) access to
your system. Alternatively, you can prefix each command using the
`sudo' (Linux) or `pfexec' (OpenSolaris) command.

The procedure does not set up any passwords for MySQL accounts.  After
following the procedure, proceed to *Note default-privileges::.

* Create a `mysql' User and Group *

If your system does not already have a user and group for *Note
`mysqld': mysqld. to run as, you may need to create one. The following
commands add the `mysql' group and the `mysql' user. You might want to
call the user and group something else instead of `mysql'. If so,
substitute the appropriate name in the following instructions. The
syntax for `useradd' and `groupadd' may differ slightly on different
versions of Unix, or they may have different names such as `adduser'
and `addgroup'.

     shell> groupadd mysql
     shell> useradd -r -g mysql mysql

*Note*:

Because the user is required only for ownership purposes, not login
purposes, the `useradd' command uses the `-r' option to create a user
that does not have login permissions to your server host. Omit this
option to permit logins for the user (or if your `useradd' does not
support the option).

* Obtain and Unpack the Distribution *

Pick the directory under which you want to unpack the distribution and
change location into it. The example here unpacks the distribution
under `/usr/local'. The instructions, therefore, assume that you have
permission to create files and directories in `/usr/local'. If that
directory is protected, you must perform the installation as `root'.

     shell> cd /usr/local

Obtain a distribution file using the instructions in *Note
getting-mysql::. For a given release, binary distributions for all
platforms are built from the same MySQL source distribution.

Unpack the distribution, which creates the installation directory.
Then create a symbolic link to that directory.  `tar' can uncompress
and unpack the distribution if it has `z' option support:

     shell> tar zxvf /PATH/TO/MYSQL-VERSION-OS.tar.gz
     shell> ln -s FULL-PATH-TO-MYSQL-VERSION-OS mysql

The `tar' command creates a directory named `mysql-VERSION-OS'.  The
`ln' command makes a symbolic link to that directory. This enables you
to refer more easily to the installation directory as
`/usr/local/mysql'.

If your `tar' does not have `z' option support, use `gunzip' to unpack
the distribution and `tar' to unpack it. Replace the preceding `tar'
command with the following alternative command to uncompress and
extract the distribution:

     shell> gunzip < /PATH/TO/MYSQL-VERSION-OS.tar.gz | tar xvf -

* Perform Postinstallation Setup *

The remainder of the installation process involves setting up the
configuration file, creating the core databases, and starting the MySQL
server. For next steps, see *Note postinstallation::.

*Note*:

The accounts that are listed in the MySQL grant tables initially have
no passwords. After starting the server, you should set up passwords
for them using the instructions in *Note default-privileges::.


File: manual.info,  Node: windows-installation,  Next: macosx-installation,  Prev: binary-installation,  Up: installing

2.3 Installing MySQL on Microsoft Windows
=========================================

* Menu:

* windows-installation-layout::  MySQL Installation Layout on Microsoft Windows
* windows-choosing-package::     Choosing An Installation Package
* mysql-installer::              Installing MySQL on Microsoft Windows Using MySQL Installer
* windows-notifier::             MySQL Notifier for Microsoft Windows
* windows-using-installer::      Installing MySQL on Microsoft Windows Using an MSI Package
* mysql-config-wizard::          MySQL Server Instance Configuration Wizard
* windows-install-archive::      Installing MySQL on Microsoft Windows Using a `noinstall' Zip Archive
* windows-troubleshooting::      Troubleshooting a Microsoft Windows MySQL Server Installation
* windows-upgrading::            Upgrading MySQL on Windows
* windows-postinstallation::     Windows Postinstallation Procedures

MySQL for Microsoft Windows is available in a number of different
forms. A Microsoft Windows operating system such as Windows XP, Windows
Vista, Windows 7, Windows 8, Windows Server 2003, Windows Server 2008,
or Windows Server 2012. Both 32-bit and 64-bit versions are supported.
For supported platform information, see
http://www.mysql.com/support/supportedplatforms/database.html.

In addition to running MySQL as a standard application, you can also
run the MySQL server as a Windows service. By using a service you can
monitor and control the operation of the server through the standard
Windows service management tools. For more information, see *Note
windows-start-service::.

Generally, you should install MySQL on Windows using an account that
has administrator rights. Otherwise, you may encounter problems with
certain operations such as editing the `PATH' environment variable or
accessing the `Service Control Manager'. Once installed, MySQL does not
need to be executed using a user with Administrator privileges.

For a list of limitations within the Windows version of MySQL, see
*Note limits-windows::.

In addition to the MySQL Server package, you may need or want
additional components to use MySQL with your application or development
environment. These include, but are not limited to:

   * If you plan to connect to the MySQL server using ODBC, you need a
     Connector/ODBC driver. For more information, including
     installation and configuration instructions, see *Note
     connector-odbc::.

   * If you plan to use MySQL server with .NET applications, you need
     the Connector/Net driver. For more information, including
     installation and configuration instructions, see *Note
     connector-net::.

MySQL distributions for Windows can be downloaded from
`http://dev.mysql.com/downloads/'. See *Note getting-mysql::.

MySQL for Windows is available in several distribution formats,
detailed below. Generally speaking, you should use MySQL Installer. It
contains more features and MySQL products than the older MSI, is
simpler to use than the ZIP file, and you need no additional tools to
get MySQL up and running. MySQL Installer will automatically install
MySQL Server, install additional MySQL products, create an options
file, starts the server, and allow you to create default user accounts.
For more information on choosing a package, see *Note
windows-choosing-package::.

MySQL for Windows is available in several distribution formats,
detailed below. Generally speaking, you should use a binary
distribution that includes an installer. It is simpler to use than the
others, and you need no additional tools to get MySQL up and running.
The installer for the Windows version of MySQL, combined with a GUI
Config Wizard, automatically installs MySQL, creates an option file,
starts the server, and secures the default user accounts.

   * Binary installer distribution. There are two different installable
     distributions that come packaged as a Microsoft Windows Installer
     (MSI) package that you can install manually or automatically on
     your systems. The older MSI package that contains all the files
     you need to install and configure MySQL server, but no additional
     components, and the preferred MySQL Installer package that
     includes MySQL Server and additional MySQL products including
     MySQL Workbench, MySQL Notifier, and MySQL for Excel.  And MySQL
     Installer can also be used to upgrade these product in the future.
     For more information on choosing a package, see *Note
     windows-choosing-package::

     For instructions on installing MySQL using MySQL Installer, see
     *Note mysql-installer::.

   * Standard binary distribution format packaged as a Zip file
     containing all of the necessary files that you unpack into your
     chosen location. This package contains all of the files in the
     full Windows MSI Installer package, but does not include an
     installation program.

     For instructions on installing MySQL using the Zip file, see *Note
     windows-install-archive::.

   * The source distribution contains all the code and support files
     for building the executables using the Visual Studio compiler
     system.

     For instructions on building MySQL from source on Windows, see
     *Note source-installation::.

*MySQL on Windows considerations:*

   * *Large Table Support*

     If you need tables with a size larger than 4GB, install MySQL on
     an NTFS or newer file system. Do not forget to use `MAX_ROWS' and
     `AVG_ROW_LENGTH' when you create tables. See *Note create-table::.

   * *MySQL and Virus Checking Software*

     Using virus scanning software such as Norton/Symantec Anti-Virus
     on directories containing MySQL data and temporary tables can
     cause issues, both in terms of the performance of MySQL and the
     virus-scanning software mis-identifying the contents of the files
     as containing spam. This is because of the fingerprinting
     mechanism used by the virus scanning software, and the way in
     which MySQL rapidly updates different files, which may be
     identified as a potential security risk.

     After installing MySQL Server, it is recommended that you disable
     virus scanning on the main directory (`datadir') being used to
     store your MySQL table data. There is usually a system built into
     the virus scanning software to permit certain directories to be
     specifically ignored during virus scanning.

     In addition, by default, MySQL creates temporary files in the
     standard Windows temporary directory. To prevent the temporary
     files also being scanned, you should configure a separate
     temporary directory for MySQL temporary files and add this to the
     virus scanning exclusion list. To do this, add a configuration
     option for the `tmpdir' parameter to your `my.ini' configuration
     file. For more information, see *Note windows-create-option-file::.


File: manual.info,  Node: windows-installation-layout,  Next: windows-choosing-package,  Prev: windows-installation,  Up: windows-installation

2.3.1 MySQL Installation Layout on Microsoft Windows
----------------------------------------------------

For MySQL 5.5 on Windows, the default installation directory is
`C:\Program Files\MySQL\MySQL Server 5.5'. Some Windows users prefer to
install in `C:\mysql', the directory that formerly was used as the
default. However, the layout of the subdirectories remains the same.

All of the files are located within this parent directory, using the
structure shown in the following table.

*Default MySQL Installation Layout for Microsoft Windows*

Directory              Contents of Directory         Notes
`bin'                  Client programs and the       
                       *Note `mysqld': mysqld.       
                       server                        
`%ALLUSERSPROFILE%\MySQL\MySQLLog files, databases          The Windows system
Server 5.5\'           (Windows XP, Windows Server   variable
                       2003)                         %ALLUSERSPROFILE%
                                                     defaults to
                                                     `C:\Documents and
                                                     Settings\All
                                                     Users\Application
                                                     Data'
`%PROGRAMDATA%\MySQL\MySQLLog files, databases (Vista,  The Windows system
Server 5.5\'           Windows 7, Windows Server     variable
                       2008, and newer)              %PROGRAMDATA%
                                                     defaults to
                                                     `C:\ProgramData'
`examples'             Example programs and scripts  
`include'              Include (header) files        
`lib'                  Libraries                     
`scripts'              Utility scripts               
`share'                Miscellaneous support files,  
                       including error messages,     
                       character set files, sample   
                       configuration files, SQL for  
                       database installation         

If you install MySQL using a Windows MSI package, this package creates
and sets up the data directory that the installed server will use, but
as of MySQL 5.5.5, it also creates a pristine `template' data directory
named `data' under the installation directory. This directory can be
useful when the machine will be used to run multiple instances of
MySQL: After an installation has been performed using an MSI package,
the template data directory can be copied to set up additional MySQL
instances. See *Note multiple-servers::.


File: manual.info,  Node: windows-choosing-package,  Next: mysql-installer,  Prev: windows-installation-layout,  Up: windows-installation

2.3.2 Choosing An Installation Package
--------------------------------------

For MySQL 5.5, there are installation package formats to choose from
when installing MySQL on Windows:

*Note*:

MySQL Installer and the "Complete Package" methods for installing MySQL
are similar, but different. The MySQL Installer is the newer and more
advanced option, and it includes all functionality found within the
"Complete Package."

   * *MySQL Installer*: This package has a file name similar to
     `mysql-installer-community-5.5.35.0.msi' or
     `mysql-installer-commercial-5.5.35.0.msi', and utilizes MSI's to
     automatically install MySQL server and other products. It will
     download and apply updates to itself, and for each of the
     installed products. It also configures the additional non-server
     products.

     The installed products are configurable, and this includes:
     documentation with samples and examples, connectors (such as C,
     C++, J, NET, and ODBC), MySQL Workbench, MySQL Notifier for
     Microsoft Windows, MySQL for Excel, and the MySQL Server with its
     components.

     MySQL Installer will run on all Windows platforms that are
     supported by MySQL (see
     http://www.mysql.com/support/supportedplatforms/database.html).
     Note: because MySQL is not a native component of Windows and
     depends on .NET, it will not work on minimal installation options
     like the "Server Core" version of Windows Server 2008.

     For instructions on installing MySQL using MySQL Installer, see
     *Note mysql-installer::.

   * *The Complete Package*: This package has a file name similar to
     `mysql-5.5.35-win32.msi' and contains all files needed for a
     complete Windows installation, including the Configuration Wizard.
     This package includes optional components such as the embedded
     server and benchmark suite.

   * *The Noinstall Archive*: This package has a file name similar to
     `mysql-5.5.35-win32.zip' and contains all the files found in the
     Complete install package, with the exception of the Configuration
     Wizard. This package does not include an automated installer, and
     must be manually installed and configured.

MySQL Installer is recommended for most users. Both MySQL Installer and
the alternative "Complete distribution" versions are available as
`.msi' files for use with installations on Windows. The Noinstall
distribution is packaged as a Zip archive.  To use a Zip archive, you
must have a tool that can unpack `.zip' files.

Your choice of install package affects the installation process you
must follow. If you choose to install using MySQL Installer, see *Note
mysql-installer::. If you choose to install a standard MSI package, see
*Note windows-using-installer::. If you choose to install a Noinstall
archive, see *Note windows-install-archive::.


File: manual.info,  Node: mysql-installer,  Next: windows-notifier,  Prev: windows-choosing-package,  Up: windows-installation

2.3.3 Installing MySQL on Microsoft Windows Using MySQL Installer
-----------------------------------------------------------------

* Menu:

* mysql-installer-gui::          MySQL Installer GUI
* MySQLInstallerConsole::        MySQL Installer Console

MySQL Installer is an application that simplifies the installation and
updating process for a wide range of MySQL products, including *Note
MySQL Notifier for Microsoft Windows: windows-notifier, *Note MySQL
Workbench: workbench, and *Note MySQL for Excel: mysql-for-excel. From
this central application, you can see which MySQL products are already
installed, configure them, and update or remove them if necessary. The
installer can also install plugins, documentation, tutorials, and
example databases. The MySQL Installer is only available for Microsoft
Windows, and includes both a GUI and command-line interface.

* Installer package types *

   * `Full:' Bundles all of the MySQL products (including MySQL
     Server). The file is over 160MB, and have names of the form
     `mysql-installer-community-VERSION.N.msi' where `VERSION' is the
     MySQL Server version number such as 5.6 and `N' is the package
     number, which begins at 0.

   * `Web:' Only contains the Installer and configuration files, and it
     only downloads the MySQL products you choose to install. The file
     is about 2MB, and have names of the form
     `mysql-installer-community-`web'-VERSION.N.msi' where `VERSION' is
     the MySQL Server version number such as 5.6 and `N' is the package
     number, which begins at 0.

* Installer editions *

   * `Community edition:' Downloadable at
     `http://dev.mysql.com/downloads/installer/'. It installs the
     community edition of all MySQL products.

   * `Commercial edition:' Downloadable at either My Oracle Support
     (https://support.oracle.com/) (MOS) or
     `https://edelivery.oracle.com/'. It installs the commercial
     version of all MySQL products, including Workbench SE. It also
     integrates with your MOS account, so enter in your MOS credentials
     to automatically receive updates for your commercial MySQL
     products.

For release notes detailing the changes in each release of MySQL
Installer, see MySQL Installer Release Notes
(http://dev.mysql.com/doc/relnotes/mysql-installer/en/).

MySQL Installer is compatible with pre-existing installations, and adds
them to its list of installed components. And while the MySQL Installer
is bundled with a specific version of MySQL Server, a single MySQL
Installer instance can install and manage multiple MySQL Server
versions. For example, a single MySQL Installer instance can install
versions 5.1, 5.5, and 5.6. It can also manage either commercial or
community editions of the MySQL Server.

*Note*:

A single host can not have both community and commercial editions of
MySQL Server installed. For example, if you want both MySQL Server 5.5
and 5.6 installed on a single host, then both must be the same
commercial or community edition.

MySQL Installer handles the initial configuration and setup of the
applications. For example:

  1. It will create MySQL Server connections in MySQL Workbench.

  2. It creates the configuration file (`my.ini') that is used to
     configure the MySQL Server. The values written to this file are
     influenced by choices you make during the installation process.

  3. It imports example databases.

  4. It creates MySQL Server user accounts with configurable
     permissions based on general roles, such as DB Administrator, DB
     Designer, and Backup Admin. It optionally creates a Windows user
     named `MysqlSys' with limited privileges, which would then run the
     MySQL Server.

     This feature is only available during the initial installation of
     the MySQL Server, and not during future updates. User accounts may
     also be added with MySQL Workbench.

  5. If the "Advanced Configuration" option is checked, then the
     `Logging Options' are also configured. This includes defining file
     paths for the error log, general log, slow query log (including
     the configuration of seconds it requires to execute a query), and
     the binary log.

MySQL Installer can optionally check for updated components and
download them for you automatically.


File: manual.info,  Node: mysql-installer-gui,  Next: MySQLInstallerConsole,  Prev: mysql-installer,  Up: mysql-installer

2.3.3.1 MySQL Installer GUI
...........................

After installation of the GUI version, the installer will have add its
own Start Menu item under MySQL.

*Note*:

Files that are generated by MySQL Installer grant full permissions to
the user that executes MySQL Installer, including `my.ini'.  This does
not apply to files and directories for specific products such as the
MySQL Server data directory in `ProgramData', that is owned by `SYSTEM'.

After the installer itself has been installed and started, the
following screen is displayed:

FIGURE GOES HERE: MySQL Installer - Welcome Screen

There are three main options:

  1. Install MySQL Products - The Installation Wizard.

  2. About MySQL - Learn about MySQL products and features.

  3. Resources - Information to help install and configure MySQL.

To `Install MySQL Products' after executing MySQL Installer for the
first time, you must accept the license agreement before proceeding
with the installation process.

FIGURE GOES HERE: MySQL Installer - License Agreement

If you are connected to the Internet, then the Installer will search
for the latest MySQL components and add them to the installation
bundle. Click `Connect to the Internet' to complete this step, or
otherwise check the `Skip' checkbox and then `Continue'.

FIGURE GOES HERE: MySQL Installer - Find latest products

If you chose "Connect to the Internet," the next page will show the
progress of MySQL Installer's search for available updates. When the
search is complete (or if you opted to skip the search), you will be
taken to the `Choose Setup Type' page:

FIGURE GOES HERE: MySQL Installer - Choosing a Setup Type

Determine the option most compatible with your preferences by reading
the `Setup Type Description' descriptions.

The Installation and Data paths are also defined here, and a caution
flag will notify you if the data path you define already exists.

After you select a setup type, the MySQL Installer will check your
system for the necessary external requirements and download then install
missing components onto your system.

FIGURE GOES HERE: MySQL Installer - Check Requirements

The next window lists the MySQL products that are scheduled to be
installed:

FIGURE GOES HERE: MySQL Installer - Installation Progress

As components are installed, you'll see their status change from "to be
installed" to "install success."

FIGURE GOES HERE: MySQL Installer - Installation Progress status

After all components are installed, the next step involves configuring
the products. The `Configuration Overview' window displays the progress
and then loads a configuration window if it is required.

FIGURE GOES HERE: MySQL Installer - Configuration Overview

The ideal MySQL Server configuration depends on your intended use, as
explained in the next window. Choose the description that most closely
applies to your machine.

You may enable TCP/IP Networking here as otherwise only localhost
connections are allowed.

Checking the "Advanced Configuration" option provides additional
`Logging Options' to configure. This includes defining file paths for
the error log, general log, slow query log (including the configuration
of seconds it requires to execute a query), and the binary log.

FIGURE GOES HERE: MySQL Installer - MySQL Server Configuration: Define
platform, networking, and logging options

Next, choose your account information. Defining a root password is
required, whereas it's optional to create additional users. There are
several different predefined user roles that each have different
permission levels. For example, a "DB Admin" will have more privileges
than a "DB Designer.".

FIGURE GOES HERE: MySQL Installer - MySQL Server Configuration: User
accounts

*Note*:

If the MySQL Server is already installed, then the `Current Root
Password' will also be needed.

Next, configure the `Windows Service Details'.  This includes the
service name, how the MySQL Server should be loaded at startup, and how
the Windows Service for MySQL Server will be run.

FIGURE GOES HERE: MySQL Installer - MySQL Server Configuration: Windows
service details

*Note*:

When configuring `Run Windows Services as ...' using a `Custom User',
the custom user must have privileges to log on to Windows as a service.
And the `Next' button will be disabled until this user is given these
user rights.

On Microsoft Windows 7, this is configured by loading the `Start Menu',
`Control Panel', `Administrative Tools', `Local Security Policy',
`Local Policies', `User Rights Assignment', then `Log On As A Service'.
Choose `Add User or Group' here to add the custom user, and then `OK',
`OK' to save.

The final configuration step is available if the `Advanced
Configuration' option was checked, and it includes configuration
options related to log file names:

FIGURE GOES HERE: MySQL Installer - MySQL Server Configuration: Logging
options

After the MySQL Installer configuration process is completed, you may
save the installation log, and then load MySQL Workbench if the `Start
MySQL Workbench after Setup' option is checked:

FIGURE GOES HERE: MySQL Installer - Installation Complete

You can now open MySQL Installer from the Microsoft Windows Start menu
under the `MySQL' group, which will load the MySQL Installer
`Maintenance Screen'. This is used to add, update, and remove features.

FIGURE GOES HERE: MySQL Installer - Maintenance Screen

*Note*:

An `Update Screen' screen is shown if MySQL Installer is used on a
machine with older products installed, as opposed to the `Maintenance
Screen' shown above. However, the functionality remains the same.

`Add/Modify Products and Features' will list all installed and
available MySQL products.

FIGURE GOES HERE: MySQL Installer - Add/Modify Products and Features

The installation is now complete. MySQL Server should be running, and
most MySQL products installed and available for use.

See also the MySQL Workbench documentation
(`http://dev.mysql.com/doc/workbench/en/').


File: manual.info,  Node: MySQLInstallerConsole,  Prev: mysql-installer-gui,  Up: mysql-installer

2.3.3.2 MySQL Installer Console
...............................

*Note `MySQLInstallerConsole': MySQLInstallerConsole. provides
functionality similar to the GUI version of MySQL Installer, but from
the command-line. It is installed when MySQL Installer is initially
executed, and then available within the `MySQL Installer' directory.
Typically that is in `C:\Program Files (x86)\MySQL\MySQL Installer\',
and the console must be executed with administrative privileges.

To use, invoke the Command Prompt with administrative privileges by
choosing `Start', `Accessories', then right-click on `Command Prompt'
and choose `Run as administrator'. And from the command-line, optionally
change the directory to where *Note `MySQLInstallerConsole':
MySQLInstallerConsole. is located:

     C:\> cd "C:\Program Files (x86)\MySQL\MySQL Installer"

*Note `MySQLInstallerConsole': MySQLInstallerConsole. supports the
following options, which are specified on the command line:

   *  `--help', `-h', or `-?'

     Displays a help message with usage examples, and then exits.

          C:\> MySQLInstallerConsole -HELP

   *  `--updates' (or `-u')

     Checks for new products before any further action is taken.
     Disabled by default.

   *  `--nowait'

     Skips the final pause when the program finishes. Otherwise, a
     "`Press Enter to continue.'" dialogue is generated. It is used in
     conjunction with other options.

   *  `--catalog'=CATALOG_NAME (or `-c')

     Sets the default catalog. Use `--list' to view a list of available
     catalogs.

   *  `--type'=INSTALLATION_TYPE (or `-t')

     Sets the installation type.

     The possible values for `installation_type' are: developer,
     server, client, full, and custom.

   *  `--action'=ACTION_NAME

     The action being performed.

     The possible values are: install, remove, upgrade, list, and
     status.

        * *install*: Installs a product or products, as defined by
          `--products'

        * *upgrade*: Upgrades a product or products, as defined by
          `--products'.

        * *remove*: Removes a product or products, as defined by
          `--products'.

        * *list*: Lists the product manifest, both installed and
          available products.

        * *status*: Shows the status after another action is performed.

   *  `--product'=PRODUCT_NAME[:FEATURE1],[FEATURE2], [...] (or `-p')

     Set the feature list of a product. Use `--list' to view available
     products, or pass in `--product=*' (an asterisk) to install all
     available products.

   *  `--config'=PRODUCT_NAME:passwd=ROOT_PASSWORD[;PARAMETER1=VALUE],[;PARAMETER2=VALUE],
     ...

     The configuration parameters for the most recently listed products.

   *  `--user'=PRODUCT_NAME:name=USERNAME,host:HOSTNAME,role=ROLENAME,password=PASSWORD
     or
     `--user'=PRODUCT_NAME:name=USERNAME,host:HOSTNAME,role=ROLENAME,tokens=TOKENS

     Creates a new user.

     Requires: name, host, role, and the password or tokens. Tokens are
     separated by pipe ("|") characters.


File: manual.info,  Node: windows-notifier,  Next: windows-using-installer,  Prev: mysql-installer,  Up: windows-installation

2.3.4 MySQL Notifier for Microsoft Windows
------------------------------------------

* Menu:

* windows-notifier-installation::  Remote monitoring set up and installation instructions

The MySQL Notifier for Microsoft Windows is a tool that enables you to
monitor and adjust the status of your local and remote MySQL Server
instances through an indicator that resides in the system tray. The
MySQL Notifier for Microsoft Windows also gives quick access to several
MySQL GUI tools (such as MySQL Workbench) through its context menu.

The MySQL Notifier for Microsoft Windows is installed by MySQL
Installer, and (by default) will start-up when Microsoft Windows is
started.

*Note*:

To install, download and execute the MySQL Installer
(http://dev.mysql.com/downloads/installer/), be sure the MySQL Notifier
for Microsoft Windows product is selected, then proceed with the
installation. See the *Note MySQL Installer manual: mysql-installer.
for additional details.

For release notes detailing the changes in each release of MySQL
Notifier for Microsoft Windows, see the MySQL Notifier Release Notes
(http://dev.mysql.com/doc/relnotes/mysql-notifier/en/).

Visit the MySQL Notifier forum (http://forums.mysql.com/list.php?173)
for additional MySQL Notifier for Microsoft Windows help and support.

Features include:

   * Start, Stop, and Restart instances of the MySQL Server.

   * Automatically detects (and adds) new MySQL Server services.  These
     are listed under `Manage Monitored Items', and may also be
     configured.

   * The Tray icon changes, depending on the status. It's green if all
     monitored MySQL Server instances are running, or red if at least
     one service is stopped. The `Update MySQL Notifier tray icon based
     on service status' option, which dictates this behavior, is
     enabled by default for each service.

   * Links to other applications like MySQL Workbench, MySQL Installer,
     and the MySQL Utilities. For example, choosing `Configure
     Instance' will load the MySQL Workbench Server Administration
     window for that particular instance.

   * If MySQL Workbench is also installed, then the `Configure
     Instance' and `SQL Editor' options are available for local (but
     not remote) MySQL instances.

   * Monitoring of both local and remote MySQL instances.

*Note*:

Remote monitoring is available since MySQL Notifier for Microsoft
Windows 1.1.0.

The MySQL Notifier for Microsoft Windows resides in the system tray and
provides visual status information for your MySQL Server instances. A
green icon is displayed at the top left corner of the tray icon if the
current MySQL Server is running, or a red icon if the service is
stopped.

The MySQL Notifier for Microsoft Windows automatically adds discovered
MySQL Services on the local machine, and each service is saved and
configurable. By default, the `Automatically add new services whose name
contains' option is enabled and set to `mysql'. Related `Notifications
Options' include being notified when new services are either discovered
or experience status changes, and are also enabled by default. And
uninstalling a service will also remove the service from the MySQL
Notifier for Microsoft Windows.

*Note*:

The `Automatically add new services whose name contains' option default
changed from ".*mysqld.*" to "mysql" in Notifier 1.1.0.

Clicking the system tray icon will reveal several options, as seen in
the screenshots below:

The Service Instance menu is the main MySQL Notifier for Microsoft
Windows window, and enables you to Stop, Start, and Restart the MySQL
Server.

FIGURE GOES HERE: MySQL Notifier for Microsoft Windows Service Instance
menu

The `Actions' menu includes several links to external applications (if
they are installed), and a a `Refresh Status' option to manually
refresh the status of all monitored services (in both local and remote
computers) and MySQL instances.

*Note*:

The main menu will not show the `Actions' menu when there are no
services being monitored by MySQL Notifier for Microsoft Windows.

*Note*:

The `Refresh Status' feature is available since MySQL Notifier for
Microsoft Windows 1.1.0.

FIGURE GOES HERE: MySQL Notifier for Microsoft Windows Actions menu

The `Actions', `Options' menu configures MySQL Notifier for Microsoft
Windows and includes options to:

   * `Use colorful status icons': Enables a colorful style of icons for
     the tray of the MySQL Notifier for Microsoft Windows.

   * `Run at Windows Startup': Allows the application to be loaded when
     Microsoft Windows starts.

   * `Automatically Check For Updates Every' # Weeks: Checks for a new
     version of MySQL Notifier for Microsoft Windows, and runs this
     check every # weeks.

   * `Automatically add new services whose name contains': The text
     used to filter services and add them automatically to the
     monitored list of the local computer running MySQL Notifier, and
     on remote computers already monitoring Windows services. monitored
     services, and also filters the list of the Microsoft Windows
     services for the `Add New Service' dialog.

     Prior to version 1.1.0, this option was named "Automatically add
     new services that match this pattern."

   * `Notify me when a service is automatically added': Will display a
     balloon notification from the taskbar when a newly discovered
     service is added to the monitored services list.

   * `Notify me when a service changes status': Will display a balloon
     notification from the taskbar when a monitored service changes its
     status.

FIGURE GOES HERE: MySQL Notifier for Microsoft Windows Options menu

The `Actions', `Manage Monitored Items' menu enables you to configure
the monitored services and MySQL instances. First, with the `Services'
tab open:

FIGURE GOES HERE: MySQL Notifier for Microsoft Windows Manage Services
menu

The `Instances' tab is similar:

FIGURE GOES HERE: MySQL Notifier for Microsoft Windows Manage Instances
menu

Adding a service or instance (after clicking `Add' in the `Manage
Monitored Items' window) enables you to select a running Microsoft
Windows service or instance connection, and configure MySQL Notifier
for Microsoft Windows to monitor it. Add a new service or instance by
clicking service name from the list, then `OK' to accept. Multiple
services and instances may be selected.

FIGURE GOES HERE: MySQL Notifier for Microsoft Windows Adding new
services

And instances:

FIGURE GOES HERE: MySQL Notifier for Microsoft Windows Adding new
instances

*Note*:

The `Instances' tab available since MySQL Notifier for Microsoft Windows
1.1.0.


File: manual.info,  Node: windows-notifier-installation,  Prev: windows-notifier,  Up: windows-notifier

2.3.4.1 Remote monitoring set up and installation instructions
..............................................................

The MySQL Notifier for Microsoft Windows uses Windows Management
Instrumentation (WMI) to manage and monitor services in remote
computers running Windows XP or later. This guide explains how it
works, and how to set up your system to monitor remote MySQL instances.

*Note*:

Remote monitoring is available since MySQL Notifier for Microsoft
Windows 1.1.0.

In order to configure WMI, it is important to understand that the
underlying Distributed Component Object Model (DCOM) architecture is
doing the WMI work. Specifically, MySQL Notifier for Microsoft Windows
is using asynchronous notification queries on remote Microsoft Windows
hosts as .NET events. These events send an asynchronous callback to the
computer running the MySQL Notifier for Microsoft Windows so it knows
when a service status has changed on the remote computer. Asynchronous
notifications offer the best performance compared to semi-synchronous
notifications or synchronous notifications that use timers.

Asynchronous notifications requires the remote computer to send a
callback to the client computer (thus opening a reverse connection), so
the Windows Firewall and DCOM settings must be properly configured for
the communication to function properly.

FIGURE GOES HERE: MySQL Notifier for Microsoft Windows Distributed
Component Object Model (DCOM)

Most of the common errors thrown by asynchronous WMI notifications are
related to Windows Firewall blocking the communication, or to DCOM /
WMI settings not being set up properly. For a list of common errors
with solutions, see *Note windows-notifier-installation-errors::.

The following steps are required to make WMI function. These steps are
divided between two machines. A single host computer that runs MySQL
Notifier for Microsoft Windows (Computer A), and multiple remote
machines that are being monitored (Computer B).

* Computer running MySQL Notifier for Microsoft Windows (Computer A) *

  1. Allow for remote administration by either editing the `Group
     Policy Editor', or using `NETSH':

     Using the `Group Policy Editor':

       1. Click `Start', click `Run', type `GPEDIT.MSC', and then click
          `OK'.

       2. Under the `Local Computer Policy' heading, double-click
          `Computer Configuration'.

       3. Double-click `Administrative Templates', then `Network',
          `Network Connections', and then `Windows Firewall'.

       4. If the computer is in the domain, then double-click `Domain
          Profile'; otherwise, double-click `Standard Profile'.

       5. Click `Windows Firewall: Allow inbound remote administration
          exception'.

       6. On the Action menu either select `Edit', or double-click the
          selection from the previous step.

       7. Check the `Enabled' radio button, and then click `OK'.

     Using the `NETSH' command:

       1. Open a command prompt window with Administrative rights (you
          can right-click the Command Prompt icon and click `Run as
          Administrator').

       2. Execute the following command:

               NETSH firewall set service RemoteAdmin enable

  2. Open the DCOM port TCP 135:

       1. Open a command prompt window with Administrative rights (you
          can right-click the Command Prompt icon and click `Run as
          Administrator') .

       2. Execute the following command:

               NETSH firewall add portopening protocol=tcp port=135 name=DCOM_TCP135

  3. Add the client application which contains the sink for the
     callback (`MySqlNotifier.exe') to the Windows Firewall Exceptions
     List (use either the Windows Firewall configuration or `NETSH'):

     Using the Windows Firewall configuration:

       1. In the Control Panel, double-click `Windows Firewall'.

       2. In the Windows Firewall window's left panel, click `Allow a
          program or feature through Windows Firewall'.

       3. In the Allowed Programs window, click `Change Settings'.

       4. If `MySqlNotifier.exe' is in the Allowed programs and
          features list, make sure it is checked for the type of
          networks the computer connects to (Private, Public or both).

       5. If `MySqlNotifier.exe' is not in the list, click `Allow
          another program...'.

       6. In the `Add a Program' window, select the `MySqlNotifier.exe'
          if it exists in the Programs list, otherwise click Browse...
          and go to the directory where `MySqlNotifier.exe' was
          installed to select it, then click `Add'.

       7. Make sure `MySqlNotifier.exe' is checked for the type of
          networks the computer connects to (Private, Public or both).

     Using the `NETSH' command:

       1. Open a command prompt window with Administrative rights (you
          can right-click the Command Prompt icon and click `Run as
          Administrator').

       2. Execute the following command, where you change
          "[YOUR_INSTALL_DIRECTORY]":

               NETSH firewall add allowedprogram program=[YOUR_INSTALL_DIRECTORY]\MySqlNotifier.exe name=MySqlNotifier

  4. If Computer B is either a member of `WORKGROUP' or is in a
     different domain that is untrusted by Computer A, then the
     callback connection (Connection 2) is created as an Anonymous
     connection. To grant Anonymous connections DCOM Remote Access
     permissions:

       1. Click `Start', click `Run', type `DCOMCNFG', and then click
          `OK'.

       2. In the Component Services dialog box, expand Component
          Services, expand Computers, and then right-click `My
          Computer' and click `Properties'.

       3. In the My Computer Properties dialog box, click the `COM
          Security' tab.

       4. Under Access Permissions, click `Edit Limits'.

       5. In the Access Permission dialog box, select `ANONYMOUS LOGON
          name' in the Group or user names box. In the Allow column
          under Permissions for User, select `Remote Access', and then
          click `OK'.

* Monitored Remote Computer (Computer B) *

If the user account that is logged into the computer running the MySQL
Notifier for Microsoft Windows (Computer A) is a local administrator on
the remote computer (Computer B), such that the same account is an
administrator on Computer B, you can skip to the "Allow for remote
administration" step.

Setting DCOM security to allow a non-administrator user to access a
computer remotely:

  1. Grant "DCOM remote launch" and activation permissions for a user
     or group:

       1. Click `Start', click `Run', type `DCOMCNFG', and then click
          `OK'.

       2. In the Component Services dialog box, expand Component
          Services, expand Computers, and then right-click `My
          Computer' and click `Properties'.

       3. In the My Computer Properties dialog box, click the `COM
          Security' tab.

       4. Under Access Permissions, click `Edit Limits'.

       5. In the `Launch Permission' dialog box, follow these steps if
          your name or your group does not appear in the Groups or user
          names list:

            1. In the `Launch Permission' dialog box, click `Add'.

            2. In the Select Users, Computers, or Groups dialog box,
               add your name and the group in the "Enter the object
               names to select" box, and then click `OK'.

       6. In the `Launch Permission' dialog box, select your user and
          group in the Group or user names box.  In the Allow column
          under Permissions for User, select `Remote Launch', select
          `Remote Activation', and then click `OK'.

     Grant DCOM remote access permissions:

       1. Click `Start', click `Run', type `DCOMCNFG', and then click
          `OK'.

       2. In the Component Services dialog box, expand Component
          Services, expand Computers, and then right-click `My
          Computer' and click `Properties'.

       3. In the My Computer Properties dialog box, click the `COM
          Security' tab.

       4. Under Access Permissions, click `Edit Limits'.

       5. In the Access Permission dialog box, select `ANONYMOUS LOGON
          name' in the Group or user names box. In the Allow column
          under Permissions for User, select `Remote Access', and then
          click `OK'.

  2. Allowing non-administrator users access to a specific WMI
     namespace:

       1. In the Control Panel, double-click `Administrative Tools'.

       2. In the Administrative Tools window, double-click `Computer
          Management'.

       3. In the Computer Management window, expand the `Services and
          Applications' tree and double-click the `WMI Control'.

       4. Right-click the WMI Control icon and select `Properties'.

       5. In the WMI Control Properties window, click the `Security'
          tab.

       6. In the Security tab, select the namespace and click
          `Security'.

       7. Locate the appropriate account and check `Remote Enable in
          the Permissions list'.

  3. Allow for remote administration by either editing the `Group
     Policy Editor' or using `NETSH':

     Using the `Group Policy Editor':

       1. Click `Start', click `Run', type `GPEDIT.MSC', and then click
          `OK'.

       2. Under the Local Computer Policy heading, double-click
          `Computer Configuration'.

       3. Double-click `Administrative Templates', then `Network',
          `Network Connections', and then `Windows Firewall'.

       4. If the computer is in the domain, then double-click `Domain
          Profile'; otherwise, double-click `Standard Profile'.

       5. Click `Windows Firewall: Allow inbound remote administration
          exception'.

       6. On the Action menu either select `Edit', or double-click the
          selection from the previous step.

       7. Check the `Enabled' radio button, and then click `OK'.

     Using the `NETSH' command:

       1. Open a command prompt window with Administrative rights (you
          can right-click the Command Prompt icon and click Run as
          Administrator).

       2. Execute the following command:

               NETSH firewall set service RemoteAdmin enable

  4. Now, be sure the user you are logging in with uses the `Name'
     value and not the `Full Name' value:

       1. In the `Control Panel', double-click `Administrative Tools'.

       2. In the `Administrative Tools' window, double-click `Computer
          Management'.

       3. In the `Computer Management' window, expand the `System Tools
          then Local Users and Groups'.

       4. Click the `Users' node, and on the right side panel locate
          your user and make sure it uses the `Name' value to connect,
          and not the `Full Name' value.

  5. If the remote computer is running on `Windows XP Professional',
     make sure that remote logins are not being forcefully changed to
     the guest account user (also known as `ForceGuest'), which is
     enabled by default on computers that are not attached to a domain.

       1. Click Start, click Run, type `SECPOL.MSC', and then click
          `OK'.

       2. Under the `Local Policies' node, double-click `Security
          Options'.

       3. Select `Network Access: Sharing and security model for local
          accounts' and save.

* Common Errors *

   * `0x80070005'

        * DCOM Security was not configured properly (see Computer B,
          the `Setting DCOM security...' step).

        * The remote computer (Computer B) is a member of WORKGROUP or
          is in a domain that is untrusted by the client computer
          (Computer A) (see Computer A, the `Grant Anonymous
          connections DCOM Remote Access permissions' step).

   * `0x8007000E'

        * The remote computer (Computer B) is a member of WORKGROUP or
          is in a domain that is untrusted by the client computer
          (Computer A) (see Computer A, the `Grant Anonymous
          connections DCOM Remote Access permissions' step).

   * `0x80041003'

        * Access to the remote WMI namespace was not configured
          properly (see Computer B, the `Allowing non-administrator
          users access to a specific WMI namespace' step).

   * `0x800706BA'

        * The DCOM port is not open on the client computers (Computer
          A) firewall. See the `Open the DCOM port TCP 135' step for
          Computer A.

        * The remote computer (Computer B) is inaccessible because its
          network location is set to Public. Make sure you can access
          it through the Windows Explorer.


File: manual.info,  Node: windows-using-installer,  Next: mysql-config-wizard,  Prev: windows-notifier,  Up: windows-installation

2.3.5 Installing MySQL on Microsoft Windows Using an MSI Package
----------------------------------------------------------------

* Menu:

* windows-install-wizard::       Using the MySQL Installation Wizard
* windows-installer-msi-quiet::  Automating MySQL Installation on Microsoft Windows Using the MSI Package
* windows-installer-uninstalling::  Removing MySQL When Installed from the MSI Package

The MSI package is designed to install and configure MySQL in such a
way that you can immediately get started using MySQL.

The MySQL Installation Wizard and MySQL Configuration Wizard are
available in the Complete install package, which is recommended for
most standard MySQL installations. Exceptions include users who need to
install multiple instances of MySQL on a single server host and
advanced users who want complete control of server configuration.

   * For information on installing using the GUI MSI installer process,
     see *Note windows-install-wizard::.

   * For information on installing using the command line using the MSI
     package, see *Note windows-installer-msi-quiet::.

   * If you have previously installed MySQL using the MSI package and
     want to remove MySQL, see *Note windows-installer-uninstalling::.

The workflow sequence for using the installer is shown in the figure
below:

FIGURE GOES HERE: Installation Workflow for Windows Using MSI Installer

*Note*:

Microsoft Windows XP and later include a firewall which specifically
blocks ports. If you plan on using MySQL through a network port then
you should open and create an exception for this port before performing
the installation. To check and if necessary add an exception to the
firewall settings:

  1. First ensure that you are logged in as an Administrator or a user
     with Administrator privileges.

  2. Go to the `Control Panel', and double click the `Windows Firewall'
     icon.

  3. Choose the `Allow a program through Windows Firewall' option and
     click the `Add port' button.

  4. Enter `MySQL' into the `Name' text box and `3306' (or the port of
     your choice) into the `Port number' text box.

  5. Also ensure that the `TCP' protocol radio button is selected.

  6. If you wish, you can also limit access to the MySQL server by
     choosing the `Change scope' button.

  7. Confirm your choices by clicking the `OK' button.

Additionally, when running the MySQL Installation Wizard on Windows
Vista or newer, ensure that you are logged in as a user with
administrative rights.

*Note*:

When using Windows Vista or newer, you may want to disable User Account
Control (UAC) before performing the installation. If you do not do so,
then MySQL may be identified as a security risk, which will mean that
you need to enable MySQL. You can disable the security checking by
following these instructions:

  1. Open `Control Panel'.

  2. Under the `User Accounts and Family Safety', select `Add or remove
     user accounts.'

  3. Click the `Got to the main User Accounts page' link.

  4. Click on `Turn User Account Control on or off'. You may be
     prompted to provide permission to change this setting. Click
     `Continue'.

  5. Deselect or uncheck the check box next to `Use User Account
     Control (UAC) to help protect your computer'. Click `OK' to save
     the setting.

You will need to restart to complete the process. Click `Restart Now'
to reboot the machine and apply the changes. You can then follow the
instructions below for installing Windows.


File: manual.info,  Node: windows-install-wizard,  Next: windows-installer-msi-quiet,  Prev: windows-using-installer,  Up: windows-using-installer

2.3.5.1 Using the MySQL Installation Wizard
...........................................

* Menu:

* mysql-install-wizard-starting::  Downloading and Starting the MySQL Installation Wizard
* mysql-install-wizard-install-type::  Choosing an Install Type
* mysql-install-wizard-custom-install::  The Custom Install Dialog
* mysql-install-wizard-confirmation-dialog::  The Confirmation Dialog
* mysql-install-wizard-changes::  Changes Made by MySQL Installation Wizard
* mysql-install-wizard-upgrading::  Upgrading MySQL with the Installation Wizard

MySQL Installation Wizard is an installer for the MySQL server that
uses the latest installer technologies for Microsoft Windows. The MySQL
Installation Wizard, in combination with the MySQL Configuration
Wizard, enables a user to install and configure a MySQL server that is
ready for use immediately after installation.

The MySQL Installation Wizard is the standard installer for all MySQL
server distributions, version 4.1.5 and higher. Users of previous
versions of MySQL need to shut down and remove their existing MySQL
installations manually before installing MySQL with the MySQL
Installation Wizard. See *Note mysql-install-wizard-upgrading::, for
more information on upgrading from a previous version.

Microsoft has included an improved version of their Microsoft Windows
Installer (MSI) in the recent versions of Windows. MSI has become the
de-facto standard for application installations on Windows 2000,
Windows XP, and Windows Server 2003. The MySQL Installation Wizard
makes use of this technology to provide a smoother and more flexible
installation process.

The Microsoft Windows Installer Engine was updated with the release of
Windows XP; those using a previous version of Windows can reference
this Microsoft Knowledge Base article
(http://support.microsoft.com/default.aspx?scid=kb;EN-US;292539) for
information on upgrading to the latest version of the Windows Installer
Engine.

In addition, Microsoft has introduced the WiX (Windows Installer XML)
toolkit recently. This is the first highly acknowledged Open Source
project from Microsoft. We have switched to WiX because it is an Open
Source project and it enables us to handle the complete Windows
installation process in a flexible manner using scripts.

Improving the MySQL Installation Wizard depends on the support and
feedback of users like you. If you find that the MySQL Installation
Wizard is lacking some feature important to you, or if you discover a
bug, please report it in our bugs database using the instructions given
in *Note bug-reports::.


File: manual.info,  Node: mysql-install-wizard-starting,  Next: mysql-install-wizard-install-type,  Prev: windows-install-wizard,  Up: windows-install-wizard

2.3.5.2 Downloading and Starting the MySQL Installation Wizard
..............................................................

The MySQL installation packages can be downloaded from
`http://dev.mysql.com/downloads/'. If the package you download is
contained within a Zip archive, you need to extract the archive first.

*Note*:

If you are installing on Windows Vista or newer, it is best to open a
network port before beginning the installation. To do this, first
ensure that you are logged in as an Administrator, go to the `Control
Panel', and double-click the `Windows Firewall' icon. Choose the `Allow
a program through Windows Firewall' option and click the `Add port'
button. Enter `MySQL' into the `Name' text box and `3306' (or the port
of your choice) into the `Port number' text box. Also ensure that the
`TCP' protocol radio button is selected. If you wish, you can also
limit access to the MySQL server by choosing the `Change scope' button.
Confirm your choices by clicking the `OK' button. If you do not open a
port prior to installation, you cannot configure the MySQL server
immediately after installation. Additionally, when running the MySQL
Installation Wizard on Windows Vista or newer, ensure that you are
logged in as a user with administrative rights.

The process for starting the wizard depends on the contents of the
installation package you download. If there is a `setup.exe' file
present, double-click it to start the installation process. If there is
an `.msi' file present, double-click it to start the installation
process.


File: manual.info,  Node: mysql-install-wizard-install-type,  Next: mysql-install-wizard-custom-install,  Prev: mysql-install-wizard-starting,  Up: windows-install-wizard

2.3.5.3 Choosing an Install Type
................................

There are three installation types available: *Typical*, *Complete*, and
*Custom*.

The *Typical* installation type installs the MySQL server, the *Note
`mysql': mysql.  command-line client, and the command-line utilities.
The command-line clients and utilities include *Note `mysqldump':
mysqldump, *Note `myisamchk': myisamchk, and several other tools to
help you manage the MySQL server.

The *Complete* installation type installs all components included in
the installation package. The full installation package includes
components such as the embedded server library, the benchmark suite,
support scripts, and documentation.

The *Custom* installation type gives you complete control over which
packages you wish to install and the installation path that is used. See
*Note mysql-install-wizard-custom-install::, for more information on
performing a custom install.

If you choose the *Typical* or *Complete* installation types and click
the `Next' button, you advance to the confirmation screen to verify
your choices and begin the installation. If you choose the *Custom*
installation type and click the `Next' button, you advance to the
custom installation dialog, described in *Note
mysql-install-wizard-custom-install::.


File: manual.info,  Node: mysql-install-wizard-custom-install,  Next: mysql-install-wizard-confirmation-dialog,  Prev: mysql-install-wizard-install-type,  Up: windows-install-wizard

2.3.5.4 The Custom Install Dialog
.................................

If you wish to change the installation path or the specific components
that are installed by the MySQL Installation Wizard, choose the *Custom*
installation type.

A tree view on the left side of the custom install dialog lists all
available components. Components that are not installed have a red `X'
icon; components that are installed have a gray icon. To change whether
a component is installed, click that component's icon and choose a new
option from the drop-down list that appears.

You can change the default installation path by clicking the
`Change...' button to the right of the displayed installation path.

After choosing your installation components and installation path,
click the `Next' button to advance to the confirmation dialog.


File: manual.info,  Node: mysql-install-wizard-confirmation-dialog,  Next: mysql-install-wizard-changes,  Prev: mysql-install-wizard-custom-install,  Up: windows-install-wizard

2.3.5.5 The Confirmation Dialog
...............................

Once you choose an installation type and optionally choose your
installation components, you advance to the confirmation dialog. Your
installation type and installation path are displayed for you to review.

To install MySQL if you are satisfied with your settings, click the
`Install' button. To change your settings, click the `Back' button.  To
exit the MySQL Installation Wizard without installing MySQL, click the
`Cancel' button.

The final screen of the installer provides a summary of the
installation and gives you the option to launch the MySQL Configuration
Wizard, which you can use to create a configuration file, install the
MySQL service, and configure security settings.


File: manual.info,  Node: mysql-install-wizard-changes,  Next: mysql-install-wizard-upgrading,  Prev: mysql-install-wizard-confirmation-dialog,  Up: windows-install-wizard

2.3.5.6 Changes Made by MySQL Installation Wizard
.................................................

Once you click the `Install' button, the MySQL Installation Wizard
begins the installation process and makes certain changes to your
system which are described in the sections that follow.

*Changes to the Registry*

The MySQL Installation Wizard creates one Windows registry key in a
typical install situation, located in
`HKEY_LOCAL_MACHINE\SOFTWARE\MySQL AB'.

The MySQL Installation Wizard creates a key named after the major
version of the server that is being installed, such as `MySQL Server
5.5'. It contains two string values, `Location' and `Version'. The
`Location' string contains the path to the installation directory. In a
default installation it contains `C:\Program Files\MySQL\MySQL Server
5.5\'. The `Version' string contains the release number.  For example,
for an installation of MySQL Server 5.5.35, the key contains a value of
`5.5.35'.

These registry keys are used to help external tools identify the
installed location of the MySQL server, preventing a complete scan of
the hard-disk to determine the installation path of the MySQL server.
The registry keys are not required to run the server, and if you
install MySQL using the `noinstall' Zip archive, the registry keys are
not created.

*Changes to the Start Menu*

The MySQL Installation Wizard creates a new entry in the Windows
`Start' menu under a common MySQL menu heading named after the major
version of MySQL that you have installed. For example, if you install
MySQL 5.5, the MySQL Installation Wizard creates a `MySQL Server 5.5'
section in the `Start' menu.

The following entries are created within the new `Start' menu section:

   * `MySQL Command-Line Client': This is a shortcut to the *Note
     `mysql': mysql. command-line client and is configured to connect
     as the `root' user. The shortcut prompts for a `root' user
     password when you connect.

   * `MySQL Server Instance Config Wizard': This is a shortcut to the
     MySQL Configuration Wizard. Use this shortcut to configure a newly
     installed server, or to reconfigure an existing server.

   * `MySQL Documentation': This is a link to the MySQL server
     documentation that is stored locally in the MySQL server
     installation directory.

*Changes to the File System*

The MySQL Installation Wizard by default installs the MySQL 5.5 server
to `C:\PROGRAM FILES\MySQL\MySQL Server 5.5', where PROGRAM FILES is
the default location for applications in your system, and 5.5 is the
major version of your MySQL server. This is the recommended location
for the MySQL server, replacing the former default location `C:\mysql'.

By default, all MySQL applications are stored in a common directory at
`C:\PROGRAM FILES\MySQL', where PROGRAM FILES is the default location
for applications in your Windows installation. A typical MySQL
installation on a developer machine might look like this:

     C:\Program Files\MySQL\MySQL Server 5.5
     C:\Program Files\MySQL\MySQL Workbench 5.1 OSS

This approach makes it easier to manage and maintain all MySQL
applications installed on a particular system.

The default location of the data directory is the `AppData' directory
configured for the user that installed the MySQL application.


File: manual.info,  Node: mysql-install-wizard-upgrading,  Prev: mysql-install-wizard-changes,  Up: windows-install-wizard

2.3.5.7 Upgrading MySQL with the Installation Wizard
....................................................

The MySQL Installation Wizard can perform server upgrades automatically
using the upgrade capabilities of MSI. That means you do not need to
remove a previous installation manually before installing a new
release. The installer automatically shuts down and removes the
previous MySQL service before installing the new version.

Automatic upgrades are available only when upgrading between
installations that have the same major and minor version numbers. For
example, you can upgrade automatically from MySQL 5.5.5 to MySQL 5.5.6,
but not from MySQL 5.1 to MySQL 5.5.

See *Note windows-upgrading::.


File: manual.info,  Node: windows-installer-msi-quiet,  Next: windows-installer-uninstalling,  Prev: windows-install-wizard,  Up: windows-using-installer

2.3.5.8 Automating MySQL Installation on Microsoft Windows Using the MSI Package
................................................................................

The Microsoft Installer (MSI) supports a both a _quiet_ and a _passive_
mode that can be used to install MySQL automatically without requiring
intervention. You can use this either in scripts to automatically
install MySQL or through a terminal connection such as Telnet where you
do not have access to the standard Windows user interface. The MSI
packages can also be used in combination with Microsoft's Group Policy
system (part of Windows Server 2003 and Windows Server 2008) to install
MySQL across multiple machines.

To install MySQL from one of the MSI packages automatically from the
command line (or within a script), you need to use the `msiexec.exe'
tool. For example, to perform a quiet installation (which shows no
dialog boxes or progress):

     shell> msiexec /i mysql-5.5.35.msi /quiet

The `/i' indicates that you want to perform an installation. The
`/quiet' option indicates that you want no interactive elements.

To provide a dialog box showing the progress during installation, and
the dialog boxes providing information on the installation and
registration of MySQL, use `/passive' mode instead of `/quiet':

     shell> msiexec /i mysql-5.5.35.msi /passive

Regardless of the mode of the installation, installing the package in
this manner performs a 'Typical' installation, and installs the default
components into the standard location.

You can also use this method to uninstall MySQL by using the
`/uninstall' or `/x' options:

     shell> msiexec /x mysql-5.5.35.msi /uninstall

To install MySQL and configure a MySQL instance from the command line,
see *Note mysql-config-wizard-cmdline::.

For information on using MSI packages to install software automatically
using Group Policy, see How to use Group Policy to remotely install
software in Windows Server 2003
(http://support.microsoft.com/kb/816102).


File: manual.info,  Node: windows-installer-uninstalling,  Prev: windows-installer-msi-quiet,  Up: windows-using-installer

2.3.5.9 Removing MySQL When Installed from the MSI Package
..........................................................

To uninstall a MySQL where you have used the MSI packages, you must use
the `Add/Remove Programs' tool within `Control Panel'. To do this:

  1. Right-click the `start' menu and choose `Control Panel'.

  2. If the Control Panel is set to category mode (you will see `Pick a
     category' at the top of the `Control Panel' window), double-click
     `Add or Remove Programs'. If the Control is set to classic mode,
     double-click the `Add or Remove Programs' icon.

  3. Find MySQL in the list of installed software. MySQL Server is
     installed against major version numbers (MySQL 5.1, MySQL 5.5,
     etc.). Select the version that you want to remove and click
     `Remove'.

  4. You will be prompted to confirm the removal. Click `Yes' to remove
     MySQL.

When MySQL is removed using this method, only the installed components
are removed. Any database information (including the tables and data),
import or export files, log files, and binary logs produced during
execution are kept in their configured location.

If you try to install MySQL again the information will be retained and
you will be prompted to enter the password configured with the original
installation.

If you want to delete MySQL completely:

   * Delete the associated data directory. On Windows XP and Windows
     Server 2003, the default data directory is the configured AppData
     directory, which is `C:\Documents and Settings\All
     Users\Application Data\MySQL' by default.

   * On Windows 7 and Windows Server 2008, the default data directory
     location is `C:\ProgramData\Mysql'.

     *Note*:

     The `C:\ProgramData' directory is hidden by default. You must
     change your folder options to view the hidden file. Choose
     `Organize', `Folder and search options', `Show hidden folders'.


File: manual.info,  Node: mysql-config-wizard,  Next: windows-install-archive,  Prev: windows-using-installer,  Up: windows-installation

2.3.6 MySQL Server Instance Configuration Wizard
------------------------------------------------

* Menu:

* mysql-config-wizard-starting::  Starting the MySQL Server Instance Configuration Wizard
* mysql-config-wizard-maintenance::  Choosing a Maintenance Option
* mysql-config-wizard-configuration-type::  Choosing a Configuration Type
* mysql-config-wizard-server-type::  The Server Type Dialog
* mysql-config-wizard-database-usage::  The Database Usage Dialog
* mysql-config-wizard-tablespace::  The InnoDB Tablespace Dialog
* mysql-config-wizard-connections::  The Concurrent Connections Dialog
* mysql-config-wizard-networking::  The Networking and Strict Mode Options Dialog
* mysql-config-wizard-character-set::  The Character Set Dialog
* mysql-config-wizard-service::  The Service Options Dialog
* mysql-config-wizard-security::  The Security Options Dialog
* mysql-config-wizard-confirmation::  The Confirmation Dialog
* mysql-config-wizard-cmdline::  MySQL Server Instance Config Wizard: Creating an Instance from the Command Line

The MySQL Server Instance Configuration Wizard helps automate the
process of configuring your server. It creates a custom MySQL
configuration file (`my.ini' or `my.cnf') by asking you a series of
questions and then applying your responses to a template to generate the
configuration file that is tuned to your installation.

The MySQL Server Instance Configuration Wizard is included with the
MySQL 5.5 server. The MySQL Server Instance Configuration Wizard is
only available for Windows.


File: manual.info,  Node: mysql-config-wizard-starting,  Next: mysql-config-wizard-maintenance,  Prev: mysql-config-wizard,  Up: mysql-config-wizard

2.3.6.1 Starting the MySQL Server Instance Configuration Wizard
...............................................................

The MySQL Server Instance Configuration Wizard is normally started as
part of the installation process. You should only need to run the MySQL
Server Instance Configuration Wizard again when you need to change the
configuration parameters of your server.

If you chose not to open a port prior to installing MySQL on Windows
Vista or newer, you can choose to use the MySQL Server Configuration
Wizard after installation. However, you must open a port in the Windows
Firewall. To do this see the instructions given in *Note
mysql-install-wizard-starting::. Rather than opening a port, you also
have the option of adding MySQL as a program that bypasses the Windows
Firewall. One or the other option is sufficient--you need not do both.
Additionally, when running the MySQL Server Configuration Wizard on
Windows Vista or newer, ensure that you are logged in as a user with
administrative rights.

MySQL Server Instance Configuration Wizard

You can launch the MySQL Configuration Wizard by clicking the `MySQL
Server Instance Config Wizard' entry in the `MySQL' section of the
Windows `Start' menu.

Alternatively, you can navigate to the `bin' directory of your MySQL
installation and launch the `MySQLInstanceConfig.exe' file directly.

The MySQL Server Instance Configuration Wizard places the `my.ini' file
in the installation directory for the MySQL server. This helps
associate configuration files with particular server instances.

To ensure that the MySQL server knows where to look for the `my.ini'
file, an argument similar to this is passed to the MySQL server as part
of the service installation:

     --defaults-file="C:\PROGRAM FILES\MYSQL\MYSQL SERVER 5.5\my.ini"

Here, C:\PROGRAM FILES\MYSQL\MYSQL SERVER 5.5 is replaced with the
installation path to the MySQL Server. The `--defaults-file' option
instructs the MySQL server to read the specified file for configuration
options when it starts.

Apart from making changes to the `my.ini' file by running the MySQL
Server Instance Configuration Wizard again, you can modify it by
opening it with a text editor and making any necessary changes. You can
also modify the server configuration with the
http://www.mysql.com/products/administrator/ utility. For more
information about server configuration, see *Note server-options::.

MySQL clients and utilities such as the *Note `mysql': mysql.  and
*Note `mysqldump': mysqldump. command-line clients are not able to
locate the `my.ini' file located in the server installation directory.
To configure the client and utility applications, create a new `my.ini'
file in the Windows installation directory (for example, `C:\WINDOWS').

Under Windows Server 2003, Windows Server 2000, Windows XP, and Windows
Vista, MySQL Server Instance Configuration Wizard will configure MySQL
to work as a Windows service. To start and stop MySQL you use the
`Services' application that is supplied as part of the Windows
Administrator Tools.


File: manual.info,  Node: mysql-config-wizard-maintenance,  Next: mysql-config-wizard-configuration-type,  Prev: mysql-config-wizard-starting,  Up: mysql-config-wizard

2.3.6.2 Choosing a Maintenance Option
.....................................

If the MySQL Server Instance Configuration Wizard detects an existing
configuration file, you have the option of either reconfiguring your
existing server, or removing the server instance by deleting the
configuration file and stopping and removing the MySQL service.

To reconfigure an existing server, choose the `Re-configure Instance'
option and click the `Next' button. Any existing configuration file is
not overwritten, but renamed (within the same directory) using a
timestamp (Windows) or sequential number (Linux). To remove the
existing server instance, choose the `Remove Instance' option and click
the `Next' button.

If you choose the `Remove Instance' option, you advance to a
confirmation window. Click the `Execute' button. The MySQL Server
Configuration Wizard stops and removes the MySQL service, and then
deletes the configuration file. The server installation and its `data'
folder are not removed.

If you choose the `Re-configure Instance' option, you advance to the
`Configuration Type' dialog where you can choose the type of
installation that you wish to configure.


File: manual.info,  Node: mysql-config-wizard-configuration-type,  Next: mysql-config-wizard-server-type,  Prev: mysql-config-wizard-maintenance,  Up: mysql-config-wizard

2.3.6.3 Choosing a Configuration Type
.....................................

When you start the MySQL Server Instance Configuration Wizard for a new
MySQL installation, or choose the `Re-configure Instance' option for an
existing installation, you advance to the `Configuration Type' dialog.

MySQL Server Instance Configuration Wizard: Configuration Type

There are two configuration types available: `Detailed Configuration'
and `Standard Configuration'. The `Standard Configuration' option is
intended for new users who want to get started with MySQL quickly
without having to make many decisions about server configuration. The
`Detailed Configuration' option is intended for advanced users who want
more fine-grained control over server configuration.

If you are new to MySQL and need a server configured as a single-user
developer machine, the `Standard Configuration' should suit your needs.
Choosing the `Standard Configuration' option causes the MySQL
Configuration Wizard to set all configuration options automatically
with the exception of `Service Options' and `Security Options'.

The `Standard Configuration' sets options that may be incompatible with
systems where there are existing MySQL installations. If you have an
existing MySQL installation on your system in addition to the
installation you wish to configure, the `Detailed Configuration' option
is recommended.

To complete the `Standard Configuration', please refer to the sections
on `Service Options' and `Security Options' in *Note
mysql-config-wizard-service::, and *Note
mysql-config-wizard-security::, respectively.


File: manual.info,  Node: mysql-config-wizard-server-type,  Next: mysql-config-wizard-database-usage,  Prev: mysql-config-wizard-configuration-type,  Up: mysql-config-wizard

2.3.6.4 The Server Type Dialog
..............................

There are three different server types available to choose from.  The
server type that you choose affects the decisions that the MySQL Server
Instance Configuration Wizard makes with regard to memory, disk, and
processor usage.

MySQL Server Instance Configuration Wizard: Server Type

   * `Developer Machine': Choose this option for a typical desktop
     workstation where MySQL is intended only for personal use. It is
     assumed that many other desktop applications are running. The
     MySQL server is configured to use minimal system resources.

   * `Server Machine': Choose this option for a server machine where
     the MySQL server is running alongside other server applications
     such as FTP, email, and Web servers. The MySQL server is
     configured to use a moderate portion of the system resources.

   * `Dedicated MySQL Server Machine': Choose this option for a server
     machine that is intended to run only the MySQL server. It is
     assumed that no other applications are running. The MySQL server
     is configured to use all available system resources.

*Note*:

By selecting one of the preconfigured configurations, the values and
settings of various options in your `my.cnf' or `my.ini' will be
altered accordingly. The default values and options as described in the
reference manual may therefore be different to the options and values
that were created during the execution of the configuration wizard.


File: manual.info,  Node: mysql-config-wizard-database-usage,  Next: mysql-config-wizard-tablespace,  Prev: mysql-config-wizard-server-type,  Up: mysql-config-wizard

2.3.6.5 The Database Usage Dialog
.................................

The `Database Usage' dialog enables you to indicate the storage engines
that you expect to use when creating MySQL tables. The option you
choose determines whether the `InnoDB' storage engine is available and
what percentage of the server resources are available to `InnoDB'.

MySQL Server Instance Configuration Wizard: Usage Dialog

   * `Multifunctional Database': This option enables both the `InnoDB'
     and `MyISAM' storage engines and divides resources evenly between
     the two. This option is recommended for users who use both storage
     engines on a regular basis.

   * `Transactional Database Only': This option enables both the
     `InnoDB' and `MyISAM' storage engines, but dedicates most server
     resources to the `InnoDB' storage engine. This option is
     recommended for users who use `InnoDB' almost exclusively and make
     only minimal use of `MyISAM'.

   * `Non-Transactional Database Only': This option disables the
     `InnoDB' storage engine completely and dedicates all server
     resources to the `MyISAM' storage engine. This option is
     recommended for users who do not use `InnoDB'.

The Configuration Wizard uses a template to generate the server
configuration file. The `Database Usage' dialog sets one of the
following option strings:

     Multifunctional Database:        MIXED
     Transactional Database Only:     INNODB
     Non-Transactional Database Only: MYISAM

When these options are processed through the default template
(my-template.ini) the result is:

     Multifunctional Database:
     default-storage-engine=InnoDB
     _myisam_pct=50

     Transactional Database Only:
     default-storage-engine=InnoDB
     _myisam_pct=5

     Non-Transactional Database Only:
     default-storage-engine=MyISAM
     _myisam_pct=100
     skip-innodb

The `_myisam_pct' value is used to calculate the percentage of
resources dedicated to `MyISAM'. The remaining resources are allocated
to `InnoDB'.


File: manual.info,  Node: mysql-config-wizard-tablespace,  Next: mysql-config-wizard-connections,  Prev: mysql-config-wizard-database-usage,  Up: mysql-config-wizard

2.3.6.6 The InnoDB Tablespace Dialog
....................................

Some users may want to locate the `InnoDB' tablespace files in a
different location than the MySQL server data directory. Placing the
tablespace files in a separate location can be desirable if your system
has a higher capacity or higher performance storage device available,
such as a RAID storage system.

MySQL Server Instance Configuration Wizard: InnoDB Data Tablespace

To change the default location for the `InnoDB' tablespace files,
choose a new drive from the drop-down list of drive letters and choose
a new path from the drop-down list of paths. To create a custom path,
click the `...' button.

If you are modifying the configuration of an existing server, you must
click the `Modify' button before you change the path. In this situation
you must move the existing tablespace files to the new location
manually before starting the server.


File: manual.info,  Node: mysql-config-wizard-connections,  Next: mysql-config-wizard-networking,  Prev: mysql-config-wizard-tablespace,  Up: mysql-config-wizard

2.3.6.7 The Concurrent Connections Dialog
.........................................

To prevent the server from running out of resources, it is important to
limit the number of concurrent connections to the MySQL server that can
be established. The `Concurrent Connections' dialog enables you to
choose the expected usage of your server, and sets the limit for
concurrent connections accordingly. It is also possible to set the
concurrent connection limit manually.

MySQL Server Instance Configuration Wizard: Connections

   * `Decision Support (DSS)/OLAP': Choose this option if your server
     does not require a large number of concurrent connections. The
     maximum number of connections is set at 100, with an average of 20
     concurrent connections assumed.

   * `Online Transaction Processing (OLTP)': Choose this option if your
     server requires a large number of concurrent connections. The
     maximum number of connections is set at 500.

   * `Manual Setting': Choose this option to set the maximum number of
     concurrent connections to the server manually. Choose the number
     of concurrent connections from the drop-down box provided, or
     enter the maximum number of connections into the drop-down box if
     the number you desire is not listed.


File: manual.info,  Node: mysql-config-wizard-networking,  Next: mysql-config-wizard-character-set,  Prev: mysql-config-wizard-connections,  Up: mysql-config-wizard

2.3.6.8 The Networking and Strict Mode Options Dialog
.....................................................

Use the `Networking Options' dialog to enable or disable TCP/IP
networking and to configure the port number that is used to connect to
the MySQL server.

MySQL Server Instance Configuration Wizard: Network Configuration

TCP/IP networking is enabled by default. To disable TCP/IP networking,
uncheck the box next to the `Enable TCP/IP Networking' option.

Port 3306 is used by default. To change the port used to access MySQL,
choose a new port number from the drop-down box or type a new port
number directly into the drop-down box. If the port number you choose
is in use, you are prompted to confirm your choice of port number.

Set the `Server SQL Mode' to either enable or disable strict mode.
Enabling strict mode (default) makes MySQL behave more like other
database management systems. _If you run applications that rely on
MySQL's old `forgiving' behavior, make sure to either adapt those
applications or to disable strict mode._ For more information about
strict mode, see *Note server-sql-mode::.


File: manual.info,  Node: mysql-config-wizard-character-set,  Next: mysql-config-wizard-service,  Prev: mysql-config-wizard-networking,  Up: mysql-config-wizard

2.3.6.9 The Character Set Dialog
................................

The MySQL server supports multiple character sets and it is possible to
set a default server character set that is applied to all tables,
columns, and databases unless overridden. Use the `Character Set'
dialog to change the default character set of the MySQL server.

MySQL Server Instance Configuration Wizard: Character Set

   * `Standard Character Set': Choose this option if you want to use
     `latin1' as the default server character set. `latin1' is used for
     English and many Western European languages.

   * `Best Support For Multilingualism': Choose this option if you want
     to use `utf8' as the default server character set.  This is a
     Unicode character set that can store characters from many
     different languages.

   * `Manual Selected Default Character Set / Collation': Choose this
     option if you want to pick the server's default character set
     manually. Choose the desired character set from the provided
     drop-down list.


File: manual.info,  Node: mysql-config-wizard-service,  Next: mysql-config-wizard-security,  Prev: mysql-config-wizard-character-set,  Up: mysql-config-wizard

2.3.6.10 The Service Options Dialog
...................................

On Windows platforms, the MySQL server can be installed as a Windows
service. When installed this way, the MySQL server can be started
automatically during system startup, and even restarted automatically
by Windows in the event of a service failure.

The MySQL Server Instance Configuration Wizard installs the MySQL
server as a service by default, using the service name `MySQL'. If you
do not wish to install the service, uncheck the box next to the
`Install As Windows Service' option. You can change the service name by
picking a new service name from the drop-down box provided or by
entering a new service name into the drop-down box.

*Note*:

Service names can include any legal character except forward (`/') or
backward (`\') slashes, and must be less than 256 characters long.

*Warning*:

If you are installing multiple versions of MySQL onto the same machine,
you _must_ choose a different service name for each version that you
install. If you do not choose a different service for each installed
version then the service manager information will be inconsistent and
this will cause problems when you try to uninstall a previous version.

If you have already installed multiple versions using the same service
name, you must manually edit the contents of the
`HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services' parameters
within the Windows registry to update the association of the service
name with the correct server version.

Typically, when installing multiple versions you create a service name
based on the version information. For example, you might install MySQL
5.x as `mysql5', or specific versions such as MySQL 5.5.0 as
`mysql50500'.

To install the MySQL server as a service but not have it started
automatically at startup, uncheck the box next to the `Launch the MySQL
Server Automatically' option.


File: manual.info,  Node: mysql-config-wizard-security,  Next: mysql-config-wizard-confirmation,  Prev: mysql-config-wizard-service,  Up: mysql-config-wizard

2.3.6.11 The Security Options Dialog
....................................

The content of the security options portion of the MySQL Server
Instance Configuration Wizard will depend on whether this is a new
installation, or modifying an existing installation.

   * *Setting the root password for a new installation*

     _It is strongly recommended that you set a `root' password for
     your MySQL server_, and the MySQL Server Instance Config Wizard
     requires by default that you do so. If you do not wish to set a
     `root' password, uncheck the box next to the `Modify Security
     Settings' option.

     MySQL Server Instance Config Wizard: Security

   * To set the `root' password, enter the desired password into both
     the `New root password' and `Confirm' boxes.

     *Setting the root password for an existing installation*

     If you are modifying the configuration of an existing
     configuration, or you are installing an upgrade and the MySQL
     Server Instance Configuration Wizard has detected an existing
     MySQL system, then you must enter the existing password for `root'
     before changing the configuration information.

     MySQL Server Instance Config Wizard: Security (Existing
     Installation)

     If you want to change the current `root' password, enter the
     desired new password into both the `New root password' and
     `Confirm' boxes.

To permit `root' logins from across the network, check the box next to
the `Enable root access from remote machines' option. This decreases
the security of your `root' account.

To create an anonymous user account, check the box next to the `Create
An Anonymous Account' option.  Creating an anonymous account can
decrease server security and cause login and permission difficulties.
For this reason, it is not recommended.


File: manual.info,  Node: mysql-config-wizard-confirmation,  Next: mysql-config-wizard-cmdline,  Prev: mysql-config-wizard-security,  Up: mysql-config-wizard

2.3.6.12 The Confirmation Dialog
................................

The final dialog in the MySQL Server Instance Configuration Wizard is
the `Confirmation Dialog'. To start the configuration process, click the
`Execute' button. To return to a previous dialog, click the `Back'
button. To exit the MySQL Server Instance Configuration Wizard without
configuring the server, click the `Cancel' button.

MySQL Server Instance Configuration Wizard: Confirmation

After you click the `Execute' button, the MySQL Server Instance
Configuration Wizard performs a series of tasks and displays the
progress onscreen as the tasks are performed.

The MySQL Server Instance Configuration Wizard first determines
configuration file options based on your choices using a template
prepared by MySQL developers and engineers. This template is named
`my-template.ini' and is located in your server installation directory.

The MySQL Configuration Wizard then writes these options to the
corresponding configuration file.

If you chose to create a service for the MySQL server, the MySQL Server
Instance Configuration Wizard creates and starts the service. If you
are reconfiguring an existing service, the MySQL Server Instance
Configuration Wizard restarts the service to apply your configuration
changes.

If you chose to set a `root' password, the MySQL Configuration Wizard
connects to the server, sets your new `root' password, and applies any
other security settings you may have selected.

After the MySQL Server Instance Configuration Wizard has completed its
tasks, it displays a summary. Click the `Finish' button to exit the
MySQL Server Configuration Wizard.


File: manual.info,  Node: mysql-config-wizard-cmdline,  Prev: mysql-config-wizard-confirmation,  Up: mysql-config-wizard

2.3.6.13 MySQL Server Instance Config Wizard: Creating an Instance from the Command Line
........................................................................................

In addition to using the GUI interface to the MySQL Server Instance
Config Wizard, you can also create instances automatically from the
command line.

To use the MySQL Server Instance Config Wizard on the command line, you
need to use the `MySQLInstanceConfig.exe' command that is installed
with MySQL in the `bin' directory within the installation directory.
`MySQLInstanceConfig.exe' takes a number of command-line arguments the
set the properties that would normally be selected through the GUI
interface, and then creates a new configuration file (`my.ini') by
combining these selections with a template configuration file to
produce the working configuration file.

The main command line options are provided in the table below.  Some of
the options are required, while some options are optional.

*MySQL Server Instance Config Wizard Command Line Options*

Option         Description
Required       
Parameters     
`-nPRODUCTNAME'The name of the instance when installed
`-pPATH'       Path of the base directory for
               installation. This is equivalent to the
               directory when using the `basedir'
               configuration parameter
`-vVERSION'    The version tag to use for this
               installation
Action to      
Perform        
`-i'           Install an instance
`-r'           Remove an instance
`-s'           Stop an existing instance
`-q'           Perform the operation quietly
`-lFILENAME'   Sae the installation progress in a logfile
Config File    
to Use         
`-tFILENAME'   Path to the template config file that will
               be used to generate the installed
               configuration file
`-cFILENAME'   Path to a config file to be generated

The `-t' and `-c' options work together to set the configuration
parameters for a new instance.  The `-t' option specifies the template
configuration file to use as the basic configuration, which are then
merged with the configuration parameters generated by the MySQL Server
Instance Config Wizard into the configuration file specified by the
`-c' option.

A sample template file, `my-template.ini' is provided in the toplevel
MySQL installation directory. The file contains elements are replaced
automatically by the MySQL Server Instance Config Wizard during
configuration.

If you specify a configuration file that already exists, the existing
configuration file will be saved in the file with the original, with
the date and time added. For example, the `mysql.ini' will be copied to
`mysql 2009-10-27 1646.ini.bak'.

The parameters that you can specify on the command line are listed in
the table below.

*MySQL Server Instance Config Wizard Parameters*

Parameter      Description
`ServiceName=$'Specify the name of the service to be
               created
`AddBinToPath={yesSpecifies whether to add the binary
| no}'         directory of MySQL to the standard `PATH'
               environment variable
`ServerType={DEVELOPMENTSpecify the server type. For more
| SERVER |     information, see *Note
DEDICATED}'    mysql-config-wizard-server-type::
`DatabaseType={MIXEDSpecify the default database type. For
| INNODB |     more information, see *Note
MYISAM}'       mysql-config-wizard-database-usage::
`ConnectionUsage={DSSSpecify the type of connection support,
| OLTP}'       this automates the setting for the number
               of concurrent connections (see the
               `ConnectionCount' parameter). For more
               information, see *Note
               mysql-config-wizard-connections::
`ConnectionCount=#'Specify the number of concurrent
               connections to support. For more
               information, see *Note
               mysql-config-wizard-server-type::
`SkipNetworking={yesSpecify whether network support should be
| no}'         supported. Specifying `yes' disables
               network access altogether
`Port=#'       Specify the network port number to use for
               network connections. For more information,
               see *Note mysql-config-wizard-networking::
`StrictMode={yesSpecify whether to use the `strict' SQL
| no}'         mode. For more information, see *Note
               mysql-config-wizard-networking::
`Charset=$'    Specify the default character set. For
               more information, see *Note
               mysql-config-wizard-character-set::
`RootPassword=$'Specify the root password
`RootCurrentPassword=$'Specify the current root password then
               stopping or reconfiguring an existing
               service

*Note*:

When specifying options on the command line, you can enclose the entire
command-line option and the value you are specifying using double
quotation marks. This enables you to use spaces in the options. For
example, `"-cC:\mysql.ini"'.

The following command installs a MySQL Server 5.5 instance from the
directory `C:\Program Files\MySQL\MySQL Server 5.5' using the service
name `MySQL55' and setting the root password to 1234.

     shell> MySQLInstanceConfig.exe -i -q "-lC:\mysql_install_log.txt" »
        "-nMySQL Server 5.5" "-pC:\Program Files\MySQL\MySQL Server 5.5" -v5.5.35 »
        "-tmy-template.ini" "-cC:\mytest.ini" ServerType=DEVELOPMENT DatabaseType=MIXED »
        ConnectionUsage=DSS Port=3311 ServiceName=MySQL55 RootPassword=1234

In the above example, a log file will be generated in
`mysql_install_log.txt' containing the information about the instance
creation process. The log file generated by the above example is shown
below:

     Welcome to the MySQL Server Instance Configuration Wizard 1.0.16.0
     Date: 2009-10-27 17:07:21

     Installing service ...

     Product Name:         MySQL Server 5.5
     Version:              5.5.35
     Installation Path:    C:\Program Files\MySQL\MySQL Server 5.5\

     Creating configuration file C:\mytest.ini using template my-template.ini.
     Options:
     DEVELOPMENT
     MIXED
     DSS
     STRICTMODE

     Variables:
     port: 3311
     default-character-set: latin1
     basedir: "C:/Program Files/MySQL/MySQL Server 5.5/"
     datadir: "C:/Program Files/MySQL/MySQL Server 5.5/Data/"

     Creating Windows service entry.
     Service name: "MySQL55"
     Parameters:   "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld" --defaults-file="C:\mytest.ini" MySQL55.
     Windows service MySQL55 installed.

When using the command line, the return values in the following table
indicate an error performing the specified option.

*Return Value from MySQL Server Instance Config Wizard*

Value          Description
2              Configuration template file cannot be found
3              The Windows service entry cannot be created
4              Could not connect to the Service Control Manager
5              The MySQL service cannot be started
6              The MySQL service cannot be stopped
7              The security settings cannot be applied
8              The configuration file cannot be written
9              The Windows service entry cannot be removed

You can perform an installation of MySQL automatically using the MSI
package. For more information, see *Note windows-installer-msi-quiet::.


File: manual.info,  Node: windows-install-archive,  Next: windows-troubleshooting,  Prev: mysql-config-wizard,  Up: windows-installation

2.3.7 Installing MySQL on Microsoft Windows Using a `noinstall' Zip Archive
---------------------------------------------------------------------------

* Menu:

* windows-extract-archive::      Extracting the Install Archive
* windows-create-option-file::   Creating an Option File
* windows-select-server::        Selecting a MySQL Server Type
* windows-server-first-start::   Starting the Server for the First Time
* windows-start-command-line::   Starting MySQL from the Windows Command Line
* mysql-installation-windows-path::  Customizing the PATH for MySQL Tools
* windows-start-service::        Starting MySQL as a Windows Service
* windows-testing::              Testing The MySQL Installation

Users who are installing from the `noinstall' package can use the
instructions in this section to manually install MySQL. The process for
installing MySQL from a Zip archive is as follows:

  1. Extract the archive to the desired install directory

  2. Create an option file

  3. Choose a MySQL server type

  4. Start the MySQL server

  5. Secure the default user accounts

This process is described in the sections that follow.


File: manual.info,  Node: windows-extract-archive,  Next: windows-create-option-file,  Prev: windows-install-archive,  Up: windows-install-archive

2.3.7.1 Extracting the Install Archive
......................................

To install MySQL manually, do the following:

  1. If you are upgrading from a previous version please refer to *Note
     windows-upgrading::, before beginning the upgrade process.

  2. Make sure that you are logged in as a user with administrator
     privileges.

  3. Choose an installation location. Traditionally, the MySQL server
     is installed in `C:\mysql'. The MySQL Installation Wizard installs
     MySQL under `C:\Program Files\MySQL'. If you do not install MySQL
     at `C:\mysql', you must specify the path to the install directory
     during startup or in an option file. See *Note
     windows-create-option-file::.

  4. Extract the install archive to the chosen installation location
     using your preferred Zip archive tool. Some tools may extract the
     archive to a folder within your chosen installation location. If
     this occurs, you can move the contents of the subfolder into the
     chosen installation location.


File: manual.info,  Node: windows-create-option-file,  Next: windows-select-server,  Prev: windows-extract-archive,  Up: windows-install-archive

2.3.7.2 Creating an Option File
...............................

If you need to specify startup options when you run the server, you can
indicate them on the command line or place them in an option file. For
options that are used every time the server starts, you may find it
most convenient to use an option file to specify your MySQL
configuration. This is particularly true under the following
circumstances:

   * The installation or data directory locations are different from
     the default locations (`C:\Program Files\MySQL\MySQL Server 5.5'
     and `C:\Program Files\MySQL\MySQL Server 5.5\data').

   * You need to tune the server settings, such as memory, cache, or
     InnoDB configuration information.

When the MySQL server starts on Windows, it looks for option files in
several locations, such as the Windows directory, `C:\', and the MySQL
installation directory (for the full list of locations, see *Note
option-files::). The Windows directory typically is named something
like `C:\WINDOWS'. You can determine its exact location from the value
of the `WINDIR' environment variable using the following command:

     C:\> echo %WINDIR%

MySQL looks for options in each location first in the `my.ini' file,
and then in the `my.cnf' file. However, to avoid confusion, it is best
if you use only one file. If your PC uses a boot loader where `C:' is
not the boot drive, your only option is to use the `my.ini' file.
Whichever option file you use, it must be a plain text file.

*Note*:

When using the MySQL Installer to install MySQL Server, it will create
the `my.ini' at the default location. And as of MySQL Server 5.5.27,
the user running MySQL Installer is granted full permissions to this
new `my.ini'.

In other words, be sure that the MySQL Server user has permission to
read the `my.ini' file.

You can also make use of the example option files included with your
MySQL distribution; see *Note server-configuration-defaults::.

An option file can be created and modified with any text editor, such
as Notepad. For example, if MySQL is installed in `E:\mysql' and the
data directory is in `E:\mydata\data', you can create an option file
containing a `[mysqld]' section to specify values for the `basedir' and
`datadir' options:

     [mysqld]
     # set basedir to your installation path
     basedir=E:/mysql
     # set datadir to the location of your data directory
     datadir=E:/mydata/data

Note that Windows path names are specified in option files using
(forward) slashes rather than backslashes. If you do use backslashes,
double them:

     [mysqld]
     # set basedir to your installation path
     basedir=E:\\mysql
     # set datadir to the location of your data directory
     datadir=E:\\mydata\\data

The rules for use of backslash in option file values are given in *Note
option-files::.

The data directory is located within the `AppData' directory for the
user running MySQL.

If you would like to use a data directory in a different location, you
should copy the entire contents of the `data' directory to the new
location. For example, if you want to use `E:\mydata' as the data
directory instead, you must do two things:

  1. Move the entire `data' directory and all of its contents from the
     default location (for example `C:\Program Files\MySQL\MySQL Server
     5.5\data') to `E:\mydata'.

  2. Use a `--datadir' option to specify the new data directory
     location each time you start the server.


File: manual.info,  Node: windows-select-server,  Next: windows-server-first-start,  Prev: windows-create-option-file,  Up: windows-install-archive

2.3.7.3 Selecting a MySQL Server Type
.....................................

The following table shows the available servers for Windows in MySQL
5.5.

This table shows the available servers for Windows in MySQL 5.5.

Binary         Description
*Note          Optimized binary with named-pipe support
`mysqld':      
mysqld.        
*Note          Like *Note `mysqld': mysqld, but compiled with full
`mysqld-debug':debugging and automatic memory allocation checking
mysqld.        

All of the preceding binaries are optimized for modern Intel
processors, but should work on any Intel i386-class or higher processor.

Each of the servers in a distribution support the same set of storage
engines. The *Note `SHOW ENGINES': show-engines.  statement displays
which engines a given server supports.

All Windows MySQL 5.5 servers have support for symbolic linking of
database directories.

MySQL supports TCP/IP on all Windows platforms. MySQL servers on
Windows support named pipes as indicated in the following list.
However, the default is to use TCP/IP regardless of platform.  (Named
pipes are slower than TCP/IP in many Windows configurations.)

Named pipes are enabled only if you start the server with the
`--enable-named-pipe' option. It is necessary to use this option
explicitly because some users have experienced problems with shutting
down the MySQL server when named pipes were used.


File: manual.info,  Node: windows-server-first-start,  Next: windows-start-command-line,  Prev: windows-select-server,  Up: windows-install-archive

2.3.7.4 Starting the Server for the First Time
..............................................

This section gives a general overview of starting the MySQL server. The
following sections provide more specific information for starting the
MySQL server from the command line or as a Windows service.

The information here applies primarily if you installed MySQL using the
`Noinstall' version, or if you wish to configure and test MySQL
manually rather than with the GUI tools.

The examples in these sections assume that MySQL is installed under the
default location of `C:\Program Files\MySQL\MySQL Server 5.5'. Adjust
the path names shown in the examples if you have MySQL installed in a
different location.

Clients have two options. They can use TCP/IP, or they can use a named
pipe if the server supports named-pipe connections.

MySQL for Windows also supports shared-memory connections if the server
is started with the `--shared-memory' option. Clients can connect
through shared memory by using the `--protocol=MEMORY' option.

For information about which server binary to run, see *Note
windows-select-server::.

Testing is best done from a command prompt in a console window (or `DOS
window'). In this way you can have the server display status messages
in the window where they are easy to see. If something is wrong with
your configuration, these messages make it easier for you to identify
and fix any problems.

To start the server, enter this command:

     C:\> "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld" --console

For a server that includes `InnoDB' support, you should see the
messages similar to those following as it starts (the path names and
sizes may differ):

     InnoDB: The first specified datafile c:\ibdata\ibdata1 did not exist:
     InnoDB: a new database to be created!
     InnoDB: Setting file c:\ibdata\ibdata1 size to 209715200
     InnoDB: Database physically writes the file full: wait...
     InnoDB: Log file c:\iblogs\ib_logfile0 did not exist: new to be created
     InnoDB: Setting log file c:\iblogs\ib_logfile0 size to 31457280
     InnoDB: Log file c:\iblogs\ib_logfile1 did not exist: new to be created
     InnoDB: Setting log file c:\iblogs\ib_logfile1 size to 31457280
     InnoDB: Log file c:\iblogs\ib_logfile2 did not exist: new to be created
     InnoDB: Setting log file c:\iblogs\ib_logfile2 size to 31457280
     InnoDB: Doublewrite buffer not found: creating new
     InnoDB: Doublewrite buffer created
     InnoDB: creating foreign key constraint system tables
     InnoDB: foreign key constraint system tables created
     011024 10:58:25  InnoDB: Started

When the server finishes its startup sequence, you should see something
like this, which indicates that the server is ready to service client
connections:

     mysqld: ready for connections
     Version: '5.5.35'  socket: ''  port: 3306

The server continues to write to the console any further diagnostic
output it produces. You can open a new console window in which to run
client programs.

If you omit the `--console' option, the server writes diagnostic output
to the error log in the data directory (`C:\Program Files\MySQL\MySQL
Server 5.5\data' by default). The error log is the file with the `.err'
extension, or may be specified by passing in the `--log-error' option.

*Note*:

The accounts that are listed in the MySQL grant tables initially have
no passwords. After starting the server, you should set up passwords
for them using the instructions in *Note default-privileges::.


File: manual.info,  Node: windows-start-command-line,  Next: mysql-installation-windows-path,  Prev: windows-server-first-start,  Up: windows-install-archive

2.3.7.5 Starting MySQL from the Windows Command Line
....................................................

The MySQL server can be started manually from the command line.  This
can be done on any version of Windows.

To start the *Note `mysqld': mysqld. server from the command line, you
should start a console window (or `DOS window') and enter this command:

     C:\> "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld"

The path to *Note `mysqld': mysqld. may vary depending on the install
location of MySQL on your system.

You can stop the MySQL server by executing this command:

     C:\> "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqladmin" -u root shutdown

*Note*:

If the MySQL `root' user account has a password, you need to invoke
*Note `mysqladmin': mysqladmin.  with the `-p' option and supply the
password when prompted.

This command invokes the MySQL administrative utility *Note
`mysqladmin': mysqladmin. to connect to the server and tell it to shut
down. The command connects as the MySQL `root' user, which is the
default administrative account in the MySQL grant system. Note that
users in the MySQL grant system are wholly independent from any login
users under Windows.

If *Note `mysqld': mysqld. doesn't start, check the error log to see
whether the server wrote any messages there to indicate the cause of
the problem. By default, the error log is located in the `C:\Program
Files\MySQL\MySQL Server 5.5\data' directory. It is the file with a
suffix of `.err', or may be specified by passing in the `--log-error'
option. Alternatively, you can try to start the server as *Note `mysqld
--console': mysqld.; in this case, you may get some useful information
on the screen that may help solve the problem.

The last option is to start *Note `mysqld': mysqld. with the
`--standalone' and `--debug' options. In this case, *Note `mysqld':
mysqld. writes a log file `C:\mysqld.trace' that should contain the
reason why *Note `mysqld': mysqld. doesn't start. See *Note
dbug-package::.

Use *Note `mysqld --verbose --help': mysqld. to display all the options
that *Note `mysqld': mysqld. supports.


File: manual.info,  Node: mysql-installation-windows-path,  Next: windows-start-service,  Prev: windows-start-command-line,  Up: windows-install-archive

2.3.7.6 Customizing the PATH for MySQL Tools
............................................

To make it easier to invoke MySQL programs, you can add the path name
of the MySQL `bin' directory to your Windows system `PATH' environment
variable:

   * On the Windows desktop, right-click the `My Computer' icon, and
     select `Properties'.

   * Next select the `Advanced' tab from the `System Properties' menu
     that appears, and click the `Environment Variables' button.

   * Under `System Variables', select `Path', and then click the `Edit'
     button. The `Edit System Variable' dialogue should appear.

   * Place your cursor at the end of the text appearing in the space
     marked `Variable Value'. (Use the `End' key to ensure that your
     cursor is positioned at the very end of the text in this space.)
     Then enter the complete path name of your MySQL `bin' directory
     (for example, `C:\Program Files\MySQL\MySQL Server 5.5\bin')

     *Note*:

     There must be a semicolon separating this path from any values
     present in this field.

     Dismiss this dialogue, and each dialogue in turn, by clicking `OK'
     until all of the dialogues that were opened have been dismissed.
     You should now be able to invoke any MySQL executable program by
     typing its name at the DOS prompt from any directory on the system,
     without having to supply the path. This includes the servers, the
     *Note `mysql': mysql. client, and all MySQL command-line utilities
     such as *Note `mysqladmin': mysqladmin.  and *Note `mysqldump':
     mysqldump.

     You should not add the MySQL `bin' directory to your Windows
     `PATH' if you are running multiple MySQL servers on the same
     machine.

*Warning*:

You must exercise great care when editing your system `PATH' by hand;
accidental deletion or modification of any portion of the existing
`PATH' value can leave you with a malfunctioning or even unusable
system.


File: manual.info,  Node: windows-start-service,  Next: windows-testing,  Prev: mysql-installation-windows-path,  Up: windows-install-archive

2.3.7.7 Starting MySQL as a Windows Service
...........................................

On Windows, the recommended way to run MySQL is to install it as a
Windows service, so that MySQL starts and stops automatically when
Windows starts and stops. A MySQL server installed as a service can
also be controlled from the command line using `NET' commands, or with
the graphical `Services' utility. Generally, to install MySQL as a
Windows service you should be logged in using an account that has
administrator rights.

The `Services' utility (the Windows `Service Control Manager') can be
found in the Windows Control Panel (under `Administrative Tools' on
Windows 2000, XP, Vista, and Server 2003). To avoid conflicts, it is
advisable to close the `Services' utility while performing server
installation or removal operations from the command line.

* Installing the service *

Before installing MySQL as a Windows service, you should first stop the
current server if it is running by using the following command:

     C:\> "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqladmin"
               -u root shutdown

*Note*:

If the MySQL `root' user account has a password, you need to invoke
*Note `mysqladmin': mysqladmin.  with the `-p' option and supply the
password when prompted.

This command invokes the MySQL administrative utility *Note
`mysqladmin': mysqladmin. to connect to the server and tell it to shut
down. The command connects as the MySQL `root' user, which is the
default administrative account in the MySQL grant system. Note that
users in the MySQL grant system are wholly independent from any login
users under Windows.

Install the server as a service using this command:

     C:\> "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld" --install

The service-installation command does not start the server.
Instructions for that are given later in this section.

To make it easier to invoke MySQL programs, you can add the path name
of the MySQL `bin' directory to your Windows system `PATH' environment
variable:

   * On the Windows desktop, right-click the `My Computer' icon, and
     select `Properties'.

   * Next select the `Advanced' tab from the `System Properties' menu
     that appears, and click the `Environment Variables' button.

   * Under `System Variables', select `Path', and then click the `Edit'
     button. The `Edit System Variable' dialogue should appear.

   * Place your cursor at the end of the text appearing in the space
     marked `Variable Value'. (Use the `End' key to ensure that your
     cursor is positioned at the very end of the text in this space.)
     Then enter the complete path name of your MySQL `bin' directory
     (for example, `C:\Program Files\MySQL\MySQL Server 5.5\bin'), Note
     that there should be a semicolon separating this path from any
     values present in this field. Dismiss this dialogue, and each
     dialogue in turn, by clicking `OK' until all of the dialogues that
     were opened have been dismissed. You should now be able to invoke
     any MySQL executable program by typing its name at the DOS prompt
     from any directory on the system, without having to supply the
     path. This includes the servers, the *Note `mysql': mysql. client,
     and all MySQL command-line utilities such as *Note `mysqladmin':
     mysqladmin.  and *Note `mysqldump': mysqldump.

     You should not add the MySQL `bin' directory to your Windows
     `PATH' if you are running multiple MySQL servers on the same
     machine.

*Warning*:

You must exercise great care when editing your system `PATH' by hand;
accidental deletion or modification of any portion of the existing
`PATH' value can leave you with a malfunctioning or even unusable
system.

The following additional arguments can be used when installing the
service:

   * You can specify a service name immediately following the
     `--install' option. The default service name is `MySQL'.

   * If a service name is given, it can be followed by a single option.
     By convention, this should be `--defaults-file=FILE_NAME' to
     specify the name of an option file from which the server should
     read options when it starts.

     The use of a single option other than `--defaults-file' is possible
     but discouraged.  `--defaults-file' is more flexible because it
     enables you to specify multiple startup options for the server by
     placing them in the named option file.

   * You can also specify a `--local-service' option following the
     service name. This causes the server to run using the
     `LocalService' Windows account that has limited system privileges.
     This account is available only for Windows XP or newer. If both
     `--defaults-file' and `--local-service' are given following the
     service name, they can be in any order.

For a MySQL server that is installed as a Windows service, the
following rules determine the service name and option files that the
server uses:

   * If the service-installation command specifies no service name or
     the default service name (`MySQL') following the `--install'
     option, the server uses the a service name of `MySQL' and reads
     options from the `[mysqld]' group in the standard option files.

   * If the service-installation command specifies a service name other
     than `MySQL' following the `--install' option, the server uses that
     service name. It reads options from the `[mysqld]' group and the
     group that has the same name as the service in the standard option
     files. This enables you to use the `[mysqld]' group for options
     that should be used by all MySQL services, and an option group
     with the service name for use by the server installed with that
     service name.

   * If the service-installation command specifies a `--defaults-file'
     option after the service name, the server reads options the same
     way as described in the previous item, except that it reads options
     only from the the named file and ignores the standard option files.

As a more complex example, consider the following command:

     C:\> "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld"
               --install MySQL --defaults-file=C:\my-opts.cnf

Here, the default service name (`MySQL') is given after the `--install'
option. If no `--defaults-file' option had been given, this command
would have the effect of causing the server to read the `[mysqld]'
group from the standard option files. However, because the
`--defaults-file' option is present, the server reads options from the
`[mysqld]' option group, and only from the named file.

*Note*:

On Windows, if the server is started with the `--defaults-file' and
`--install' options, `--install' must be first.  Otherwise,
`mysqld.exe' will attempt to start the MySQL server.

You can also specify options as Start parameters in the Windows
`Services' utility before you start the MySQL service.

* Starting the service *

Once a MySQL server has been installed as a service, Windows starts the
service automatically whenever Windows starts. The service also can be
started immediately from the `Services' utility, or by using a `NET
START MySQL' command. The `NET' command is not case sensitive.

When run as a service, *Note `mysqld': mysqld. has no access to a
console window, so no messages can be seen there. If *Note `mysqld':
mysqld. does not start, check the error log to see whether the server
wrote any messages there to indicate the cause of the problem. The
error log is located in the MySQL data directory (for example,
`C:\Program Files\MySQL\MySQL Server 5.5\data'). It is the file with a
suffix of `.err'.

When a MySQL server has been installed as a service, and the service is
running, Windows stops the service automatically when Windows shuts
down. The server also can be stopped manually by using the `Services'
utility, the `NET STOP MySQL' command, or the *Note `mysqladmin
shutdown': mysqladmin. command.

You also have the choice of installing the server as a manual service
if you do not wish for the service to be started automatically during
the boot process. To do this, use the `--install-manual' option rather
than the `--install' option:

     C:\> "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld" --install-manual

* Removing the service *

To remove a server that is installed as a service, first stop it if it
is running by executing `NET STOP MySQL'.  Then use the `--remove'
option to remove it:

     C:\> "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld" --remove

If *Note `mysqld': mysqld. is not running as a service, you can start
it from the command line. For instructions, see *Note
windows-start-command-line::.

Please see *Note windows-troubleshooting::, if you encounter
difficulties during installation.


File: manual.info,  Node: windows-testing,  Prev: windows-start-service,  Up: windows-install-archive

2.3.7.8 Testing The MySQL Installation
......................................

You can test whether the MySQL server is working by executing any of
the following commands:

     C:\> "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqlshow"
     C:\> "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqlshow" -u root mysql
     C:\> "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqladmin" version status proc
     C:\> "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysql" test

If *Note `mysqld': mysqld. is slow to respond to TCP/IP connections
from client programs, there is probably a problem with your DNS. In
this case, start *Note `mysqld': mysqld.  with the `--skip-name-resolve'
option and use only `localhost' and IP addresses in the `Host' column
of the MySQL grant tables.

You can force a MySQL client to use a named-pipe connection rather than
TCP/IP by specifying the `--pipe' or `--protocol=PIPE' option, or by
specifying `.' (period) as the host name. Use the `--socket' option to
specify the name of the pipe if you do not want to use the default pipe
name.

Note that if you have set a password for the `root' account, deleted
the anonymous account, or created a new user account, then you must use
the appropriate `-u' and `-p' options with the commands shown above to
connect with the MySQL Server. See *Note connecting::.

For more information about *Note `mysqlshow': mysqlshow, see *Note
mysqlshow::.


File: manual.info,  Node: windows-troubleshooting,  Next: windows-upgrading,  Prev: windows-install-archive,  Up: windows-installation

2.3.8 Troubleshooting a Microsoft Windows MySQL Server Installation
-------------------------------------------------------------------

When installing and running MySQL for the first time, you may encounter
certain errors that prevent the MySQL server from starting. The purpose
of this section is to help you diagnose and correct some of these
errors.

Your first resource when troubleshooting server issues is the error
log. The MySQL server uses the error log to record information relevant
to the error that prevents the server from starting. The error log is
located in the data directory specified in your `my.ini' file. The
default data directory location is `C:\Program Files\MySQL\MySQL Server
5.5\data', or `C:\ProgramData\Mysql' on Windows 7 and Windows Server
2008. The `C:\ProgramData' directory is hidden by default. You need to
change your folder options to see the directory and contents. For more
information on the error log and understanding the content, see *Note
error-log::.

Another source of information regarding possible errors is the console
messages displayed when the MySQL service is starting. Use the `NET
START MySQL' command from the command line after installing *Note
`mysqld': mysqld. as a service to see any error messages regarding the
starting of the MySQL server as a service. See *Note
windows-start-service::.

The following examples show other common error messages you may
encounter when installing MySQL and starting the server for the first
time:

   * If the MySQL server cannot find the `mysql' privileges database or
     other critical files, you may see these messages:

          System error 1067 has occurred.
          Fatal error: Can't open privilege tables: Table 'mysql.host' doesn't exist

     These messages often occur when the MySQL base or data directories
     are installed in different locations than the default locations
     (`C:\Program Files\MySQL\MySQL Server 5.5' and `C:\Program
     Files\MySQL\MySQL Server 5.5\data', respectively).

     This situation may occur when MySQL is upgraded and installed to a
     new location, but the configuration file is not updated to reflect
     the new location. In addition, there may be old and new
     configuration files that conflict. Be sure to delete or rename any
     old configuration files when upgrading MySQL.

     If you have installed MySQL to a directory other than `C:\Program
     Files\MySQL\MySQL Server 5.5', you need to ensure that the MySQL
     server is aware of this through the use of a configuration
     (`my.ini') file. The `my.ini' file needs to be located in your
     Windows directory, typically `C:\WINDOWS'.  You can determine its
     exact location from the value of the `WINDIR' environment variable
     by issuing the following command from the command prompt:

          C:\> echo %WINDIR%

     An option file can be created and modified with any text editor,
     such as Notepad. For example, if MySQL is installed in `E:\mysql'
     and the data directory is `D:\MySQLdata', you can create the option
     file and set up a `[mysqld]' section to specify values for the
     `basedir' and `datadir' options:

          [mysqld]
          # set basedir to your installation path
          basedir=E:/mysql
          # set datadir to the location of your data directory
          datadir=D:/MySQLdata

     Note that Windows path names are specified in option files using
     (forward) slashes rather than backslashes. If you do use
     backslashes, double them:

          [mysqld]
          # set basedir to your installation path
          basedir=C:\\Program Files\\MySQL\\MySQL Server 5.5
          # set datadir to the location of your data directory
          datadir=D:\\MySQLdata

     The rules for use of backslash in option file values are given in
     *Note option-files::.

     If you change the `datadir' value in your MySQL configuration
     file, you must move the contents of the existing MySQL data
     directory before restarting the MySQL server.

     See *Note windows-create-option-file::.

   * If you reinstall or upgrade MySQL without first stopping and
     removing the existing MySQL service and install MySQL using the
     MySQL Configuration Wizard, you may see this error:

          Error: Cannot create Windows service for MySql. Error: 0

     This occurs when the Configuration Wizard tries to install the
     service and finds an existing service with the same name.

     One solution to this problem is to choose a service name other
     than `mysql' when using the configuration wizard. This enables the
     new service to be installed correctly, but leaves the outdated
     service in place. Although this is harmless, it is best to remove
     old services that are no longer in use.

     To permanently remove the old `mysql' service, execute the
     following command as a user with administrative privileges, on the
     command-line:

          C:\> sc delete mysql
          [SC] DeleteService SUCCESS

     If the `sc' utility is not available for your version of Windows,
     download the `delsrv' utility from
     `http://www.microsoft.com/windows2000/techinfo/reskit/tools/existing/delsrv-o.asp'
     and use the `delsrv mysql' syntax.


File: manual.info,  Node: windows-upgrading,  Next: windows-postinstallation,  Prev: windows-troubleshooting,  Up: windows-installation

2.3.9 Upgrading MySQL on Windows
--------------------------------

This section lists some of the steps you should take when upgrading
MySQL on Windows.

  1. Review *Note upgrading::, for additional information on upgrading
     MySQL that is not specific to Windows.

  2. You should always back up your current MySQL installation before
     performing an upgrade. See *Note backup-methods::.

  3. Download the latest Windows distribution of MySQL from
     `http://dev.mysql.com/downloads/'.

  4. Before upgrading MySQL, you must stop the server. If the server is
     installed as a service, stop the service with the following
     command from the command prompt:

          C:\> NET STOP MySQL

     If you are not running the MySQL server as a service, use *Note
     `mysqladmin': mysqladmin. to stop it. For example, before
     upgrading from MySQL 5.1 to 5.5, use *Note `mysqladmin':
     mysqladmin. from MySQL 5.1 as follows:

          C:\> "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqladmin" -u root shutdown

     *Note*:

     If the MySQL `root' user account has a password, you need to
     invoke *Note `mysqladmin': mysqladmin.  with the `-p' option and
     supply the password when prompted.

  5. Before upgrading a MySQL service from MySQL 5.1 to 5.5, you should
     stop the 5.1 server and remove the instance. Run the MySQL
     Instance Configuration Wizard, choose the `Remove Instance' option
     and in the next screen, confirm removal. After that it is safe to
     uninstall MySQL Server 5.1.

  6. Before upgrading to MySQL 5.5 from a version previous to 4.1.5, or
     from a version of MySQL installed from a Zip archive to a version
     of MySQL installed with the MySQL Installation Wizard, you must
     first manually remove the previous installation and MySQL service
     (if the server is installed as a service).

     To remove the MySQL service, use the following command:

          C:\> C:\mysql\bin\mysqld --remove

     *If you do not remove the existing service, the MySQL Installation
     Wizard may fail to properly install the new MySQL service.*

  7. If you are using the MySQL Installation Wizard, start the wizard
     as described in *Note windows-install-wizard::.

  8. If you are installing MySQL from a Zip archive, extract the
     archive. You may either overwrite your existing MySQL installation
     (usually located at `C:\mysql'), or install it into a different
     directory, such as `C:\mysql5'. Overwriting the existing
     installation is recommended.

  9. If you were running MySQL as a Windows service and you had to
     remove the service earlier in this procedure, reinstall the
     service. (See *Note windows-start-service::.)

 10. Restart the server. For example, use `NET START MySQL' if you run
     MySQL as a service, or invoke *Note `mysqld': mysqld. directly
     otherwise.

 11. As Administrator, run *Note `mysql_upgrade': mysql-upgrade. to
     check your tables, attempt to repair them if necessary, and update
     your grant tables if they have changed so that you can take
     advantage of any new capabilities. See *Note mysql-upgrade::.

 12. If you encounter errors, see *Note windows-troubleshooting::.


File: manual.info,  Node: windows-postinstallation,  Prev: windows-upgrading,  Up: windows-installation

2.3.10 Windows Postinstallation Procedures
------------------------------------------

On Windows, you need not create the data directory and the grant
tables. MySQL Windows distributions include the grant tables with a set
of preinitialized accounts in the `mysql' database under the data
directory. Regarding passwords, if you installed MySQL using the
Windows Installation Wizard, you may have already assigned passwords to
the accounts. (See *Note windows-install-wizard::.) Otherwise, use the
password-assignment procedure given in *Note default-privileges::.

Before setting up passwords, you might want to try running some client
programs to make sure that you can connect to the server and that it is
operating properly. Make sure that the server is running (see *Note
windows-server-first-start::), and then issue the following commands to
verify that you can retrieve information from the server. You may need
to specify directory different from `C:\mysql\bin' on the command line.
If you used the Windows Installation Wizard, the default directory is
`C:\Program Files\MySQL\MySQL Server 5.5', and the *Note `mysql':
mysql. and *Note `mysqlshow': mysqlshow. client programs are in
`C:\Program Files\MySQL\MySQL Server 5.5\bin'. See *Note
windows-install-wizard::, for more information.

Use *Note `mysqlshow': mysqlshow. to see what databases exist:

     C:\> C:\mysql\bin\mysqlshow
     +--------------------+
     |     Databases      |
     +--------------------+
     | information_schema |
     | mysql              |
     | test               |
     +--------------------+

The list of installed databases may vary, but will always include the
minimum of `mysql' and `information_schema'. In most cases, the `test'
database will also be installed automatically.

The preceding command (and commands for other MySQL programs such as
*Note `mysql': mysql.) may not work if the correct MySQL account does
not exist. For example, the program may fail with an error, or you may
not be able to view all databases. If you installed using the MSI
packages and used the MySQL Server Instance Config Wizard, then the
`root' user will have been created automatically with the password you
supplied. In this case, you should use the `-u root' and `-p' options.
(You will also need to use the `-u root' and `-p' options if you have
already secured the initial MySQL accounts.) With `-p', you will be
prompted for the `root' password. For example:

     C:\> C:\mysql\bin\mysqlshow -u root -p
     Enter password: (ENTER ROOT PASSWORD HERE)
     +--------------------+
     |     Databases      |
     +--------------------+
     | information_schema |
     | mysql              |
     | test               |
     +--------------------+

If you specify a database name, *Note `mysqlshow': mysqlshow.  displays
a list of the tables within the database:

     C:\> C:\mysql\bin\mysqlshow mysql
     Database: mysql
     +---------------------------+
     |          Tables           |
     +---------------------------+
     | columns_priv              |
     | db                        |
     | event                     |
     | func                      |
     | help_category             |
     | help_keyword              |
     | help_relation             |
     | help_topic                |
     | host                      |
     | plugin                    |
     | proc                      |
     | procs_priv                |
     | servers                   |
     | tables_priv               |
     | time_zone                 |
     | time_zone_leap_second     |
     | time_zone_name            |
     | time_zone_transition      |
     | time_zone_transition_type |
     | user                      |
     +---------------------------+

Use the *Note `mysql': mysql. program to select information from a
table in the `mysql' database:

     C:\> C:\mysql\bin\mysql -e "SELECT Host,Db,User FROM mysql.db"
     +------+--------+------+
     | host | db     | user |
     +------+--------+------+
     | %    | test   |      |
     | %    | test_% |      |
     +------+--------+------+

For more information about *Note `mysqlshow': mysqlshow. and *Note
`mysql': mysql, see *Note mysqlshow::, and *Note mysql::.

If you are running a version of Windows that supports services, you can
set up the MySQL server to run automatically when Windows starts. See
*Note windows-start-service::.


File: manual.info,  Node: macosx-installation,  Next: linux-installation,  Prev: windows-installation,  Up: installing

2.4 Installing MySQL on Mac OS X
================================

* Menu:

* macosx-installation-notes::    General Notes on Installing MySQL on Mac OS X
* macosx-installation-pkg::      Installing MySQL on Mac OS X Using Native Packages
* macosx-installation-startupitem::  Installing the MySQL Startup Item
* macosx-installation-prefpane::  Installing and Using the MySQL Preference Pane
* macosx-installation-server::   Using the Bundled MySQL on Mac OS X Server

MySQL for Mac OS X is available in a number of different forms:

   * Native Package Installer format, which uses the native Mac OS X
     installer to walk you through the installation of MySQL. For more
     information, see *Note macosx-installation-pkg::.  You can use the
     package installer with Mac OS X 10.3 and later, and the package is
     available for both PowerPC and Intel architectures, and 32-bit and
     64-bit architectures. There is no Universal Binary available using
     the package installation method. The user you use to perform the
     installation must have administrator privileges.

   * Tar package format, which uses a file packaged using the Unix
     `tar' and `gzip' commands. To use this method, you will need to
     open a `Terminal' window. You do not need administrator privileges
     using this method, as you can install the MySQL server anywhere
     using this method. For more information on using this method, you
     can use the generic instructions for using a tarball, *Note
     binary-installation::.You can use the package installer with Mac
     OS X 10.3 and later, and available for both PowerPC and Intel
     architectures, and both 32-bit and 64-bit architectures. A
     Universal Binary, incorporating both Power PC and Intel
     architectures and 32-bit and 64-bit binaries is available.

     In addition to the core installation, the Package Installer also
     includes *Note macosx-installation-startupitem:: and *Note
     macosx-installation-prefpane::, both of which simplify the
     management of your installation.

   * Mac OS X server includes a version of MySQL as standard. If you
     want to use a more recent version than that supplied with the Mac
     OS X server release, you can make use of the package or tar
     formats. For more information on using the MySQL bundled with Mac
     OS X, see *Note macosx-installation-server::.

For additional information on using MySQL on Mac OS X, see *Note
macosx-installation-notes::.


File: manual.info,  Node: macosx-installation-notes,  Next: macosx-installation-pkg,  Prev: macosx-installation,  Up: macosx-installation

2.4.1 General Notes on Installing MySQL on Mac OS X
---------------------------------------------------

You should keep the following issues and notes in mind:

   * The default location for the MySQL Unix socket is different on Mac
     OS X and Mac OS X Server depending on the installation type you
     chose. The following table shows the default locations by
     installation type.

     *MySQL Unix Socket Locations on Mac OS X by Installation Type*

     Installation Type    Socket Location
     Package Installer    `/tmp/mysql.sock'
     from MySQL           
     Tarball from MySQL   `/tmp/mysql.sock'
     MySQL Bundled with   `/var/mysql/mysql.sock'
     Mac OS X Server      

     To prevent issues, you should either change the configuration of
     the socket used within your application (for example, changing
     `php.ini'), or you should configure the socket location using a
     MySQL configuration file and the `socket' option. For more
     information, see *Note server-options::.

   * You may need (or want) to create a specific `mysql' user to own
     the MySQL directory and data. On Mac OS X 10.4 and lower you can
     do this by using the `Netinfo Manager' application, located within
     the `Utilities' folder within the `Applications' folder. On Mac OS
     X 10.5 and later you can do this through the `Directory Utility'.
     From Mac OS X 10.5 and later (including Mac OS X Server 10.5) the
     `mysql' should already exist. For use in single user mode, an
     entry for `_mysql' (note the underscore prefix) should already
     exist within the system `/etc/passwd' file.

   * Due to a bug in the Mac OS X package installer, you may see this
     error message in the destination disk selection dialog:

          You cannot install this software on this disk. (null)

     If this error occurs, click the `Go Back' button once to return to
     the previous screen. Then click `Continue' to advance to the
     destination disk selection again, and you should be able to choose
     the destination disk correctly. We have reported this bug to Apple
     and it is investigating this problem.

   * If you get an `insecure startup item disabled' error when MySQL
     launches, use the following procedure. Adjust the pathnames
     appropriately for your system.

       1. Modify the `mysql.script' using this command (enter it on a
          single line):

               shell> sudo /Applications/TextEdit.app/Contents/MacOS/TextEdit
                 /usr/local/mysql/support-files/mysql.server

       2. Locate the option file that defines the `basedir' value and
          modify it to contain these lines:

               basedir=/usr/local/mysql
               datadir=/usr/local/mysql/data

          In the `/Library/StartupItems/MySQLCOM/' directory, make the
          following group ID changes from `staff' to `wheel':

               shell> sudo chgrp wheel MySQLCOM StartupParameters.plist

       3. Start the server from System Preferences or Terminal.app.

   * Because the MySQL package installer installs the MySQL contents
     into a version and platform specific directory, you can use this
     to upgrade and migrate your database between versions. You will
     need to either copy the `data' directory from the old version to
     the new version, or alternatively specify an alternative `datadir'
     value to set location of the data directory.

   * You might want to add aliases to your shell's resource file to
     make it easier to access commonly used programs such as *Note
     `mysql': mysql. and *Note `mysqladmin': mysqladmin.  from the
     command line. The syntax for `bash' is:

          alias mysql=/usr/local/mysql/bin/mysql
          alias mysqladmin=/usr/local/mysql/bin/mysqladmin

     For `tcsh', use:

          alias mysql /usr/local/mysql/bin/mysql
          alias mysqladmin /usr/local/mysql/bin/mysqladmin

     Even better, add `/usr/local/mysql/bin' to your `PATH' environment
     variable. You can do this by modifying the appropriate startup
     file for your shell.  For more information, see *Note
     invoking-programs::.

   * After you have copied over the MySQL database files from the
     previous installation and have successfully started the new
     server, you should consider removing the old installation files to
     save disk space. Additionally, you should also remove older
     versions of the Package Receipt directories located in
     `/Library/Receipts/mysql-VERSION.pkg'.


File: manual.info,  Node: macosx-installation-pkg,  Next: macosx-installation-startupitem,  Prev: macosx-installation-notes,  Up: macosx-installation

2.4.2 Installing MySQL on Mac OS X Using Native Packages
--------------------------------------------------------

You can install MySQL on Mac OS X 10.3.x (`Panther') or newer using a
Mac OS X binary package in DMG format instead of the binary tarball
distribution. Please note that older versions of Mac OS X (for example,
10.1.x or 10.2.x) are _not_ supported by this package.

The package is located inside a disk image (`.dmg') file that you first
need to mount by double-clicking its icon in the Finder. It should then
mount the image and display its contents.

*Note*:

Before proceeding with the installation, be sure to stop all running
MySQL server instances by using either the MySQL Manager Application
(on Mac OS X Server) or *Note `mysqladmin shutdown': mysqladmin. on the
command line.

When installing from the package version, you should also install the
MySQL Preference Pane, which will enable you to control the startup and
execution of your MySQL server from System Preferences. For more
information, see *Note macosx-installation-prefpane::.

When installing using the package installer, the files are installed
into a directory within `/usr/local' matching the name of the
installation version and platform. For example, the installer file
`mysql-5.1.39-osx10.5-x86_64.pkg' installs MySQL into
`/usr/local/mysql-5.1.39-osx10.5-x86_64 '. The following table shows
the layout of the installation directory.

*MySQL Installation Layout on Mac OS X*

Directory                        Contents of Directory
`bin'                            Client programs and the *Note `mysqld':
                                 mysqld. server
`data'                           Log files, databases
`docs'                           Manual in Info format
`include'                        Include (header) files
`lib'                            Libraries
`man'                            Unix manual pages
`mysql-test'                     MySQL test suite
`scripts'                        *Note `mysql_install_db':
                                 mysql-install-db.
`share'                          Miscellaneous support files, including
                                 error messages, sample configuration
                                 files, SQL for database installation
`sql-bench'                      Benchmarks
`support-files'                  Scripts and sample configuration files
`/tmp/mysql.sock'                Location of the MySQL Unix socket

During the package installer process, a symbolic link from
`/usr/local/mysql' to the version/platform specific directory created
during installation will be created automatically.

  1. Download and open the MySQL package installer, which is provided
     on a disk image (`.dmg') that includes the main MySQL installation
     package, the `MySQLStartupItem.pkg' installation package, and the
     `MySQL.prefPane'.  Double-click the disk image to open it.

  2. Double-click the MySQL installer package. It will be named
     according to the version of MySQL you have downloaded. For
     example, if you have downloaded MySQL 5.1.39, double-click
     `mysql-5.1.39-osx10.5-x86.pkg'.

  3. You will be presented with the opening installer dialog. Click
     `Continue' to begin installation.

     MySQL Package Installer: Step 1

  4. A copy of the installation instructions and other important
     information relevant to this installation are displayed. Click
     `Continue' .

  5. If you have downloaded the community version of MySQL, you will be
     shown a copy of the relevant GNU General Public License. Click
     `Continue' .

  6. Select the drive you want to use to install the MySQL Startup
     Item. The drive must have a valid, bootable, Mac OS X operating
     system installed. Click `Continue'.

     MySQL Package Installer: Step 4

  7. You will be asked to confirm the details of the installation,
     including the space required for the installation. To change the
     drive on which the startup item is installed, click either `Go
     Back' or `Change Install Location...'. To install the startup
     item, click `Install'.

  8. Once the installation has been completed successfully, you will be
     shown an `Install Succeeded' message.

For convenience, you may also want to install the startup item and
preference pane. See *Note macosx-installation-startupitem::, and *Note
macosx-installation-prefpane::.


File: manual.info,  Node: macosx-installation-startupitem,  Next: macosx-installation-prefpane,  Prev: macosx-installation-pkg,  Up: macosx-installation

2.4.3 Installing the MySQL Startup Item
---------------------------------------

The MySQL Installation Package includes a startup item that can be used
to automatically start and stop MySQL.

To install the MySQL Startup Item:

  1. Download and open the MySQL package installer, which is provided
     on a disk image (`.dmg') that includes the main MySQL installation
     package, the `MySQLStartupItem.pkg' installation package, and the
     `MySQL.prefPane'.  Double-click the disk image to open it.

  2. Double-click the `MySQLStartItem.pkg' file to start the
     installation process.

  3. You will be presented with the `Install MySQL Startup Item' dialog.

     MySQL Startup Item Installer: Step 1

     Click `Continue' to continue the installation process.

  4. A copy of the installation instructions and other important
     information relevant to this installation are displayed. Click
     `Continue' .

  5. Select the drive you want to use to install the MySQL Startup
     Item. The drive must have a valid, bootable, Mac OS X operating
     system installed. Click `Continue'.

     MySQL Startup Item Installer: Step 3

  6. You will be asked to confirm the details of the installation.  To
     change the drive on which the startup item is installed, click
     either `Go Back' or `Change Install Location...'. To install the
     startup item, click `Install'.

  7. Once the installation has been completed successfully, you will be
     shown an `Install Succeeded' message.

     MySQL Startup Item Installer: Step 5

The Startup Item for MySQL is installed into
`/Library/StartupItems/MySQLCOM'. The Startup Item installation adds a
variable `MYSQLCOM=-YES-' to the system configuration file
`/etc/hostconfig'. If you want to disable the automatic startup of
MySQL, change this variable to `MYSQLCOM=-NO-'.

After the installation, you can start and stop MySQL by running the
following commands in a terminal window. You must have administrator
privileges to perform these tasks, and you may be prompted for your
password.

If you have installed the Startup Item, use this command to start the
server:

     shell> sudo /Library/StartupItems/MySQLCOM/MySQLCOM start

If you have installed the Startup Item, use this command to stop the
server:

     shell> sudo /Library/StartupItems/MySQLCOM/MySQLCOM stop


File: manual.info,  Node: macosx-installation-prefpane,  Next: macosx-installation-server,  Prev: macosx-installation-startupitem,  Up: macosx-installation

2.4.4 Installing and Using the MySQL Preference Pane
----------------------------------------------------

The MySQL Package installer disk image also includes a custom MySQL
Preference Pane that enables you to start, stop, and control automated
startup during boot of your MySQL installation.

To install the MySQL Preference Pane:

  1. Download and open the MySQL package installer package, which is
     provided on a disk image (`.dmg') that includes the main MySQL
     installation package, the `MySQLStartupItem.pkg' installation
     package, and the `MySQL.prefPane'.  Double-click the disk image to
     open it.

  2. Double-click the `MySQL.prefPane'. The MySQL System Preferences
     will open.

  3. If this is the first time you have installed the preference pane,
     you will be asked to confirm installation and whether you want to
     install the preference pane for all users, or only the current
     user. To install the preference pane for all users you will need
     administrator privileges. If necessary, you will be prompted for
     the username and password for a user with administrator privileges.

  4. If you already have the MySQL Preference Pane installed, you will
     be asked to confirm whether you want to overwrite the existing
     MySQL Preference Pane.

*Note*:

The MySQL Preference Pane only starts and stops MySQL installation
installed from the MySQL package installation that have been installed
in the default location.

Once the MySQL Preference Pane has been installed, you can control your
MySQL server instance using the preference pane. To use the preference
pane, open the `System Preferences...' from the Apple menu. Select the
MySQL preference pane by clicking the MySQL logo within the `Other'
section of the preference panes list.

MySQL Preference Pane

The MySQL Preference Pane shows the current status of the MySQL server,
showing `stopped' (in red) if the server is not running and `running'
(in green) if the server has already been started. The preference pane
also shows the current setting for whether the MySQL server has been
set to start automatically.

   * *To start MySQL using the preference pane: *

     Click `Start MySQL Server'. You may be prompted for the username
     and password of a user with administrator privileges to start the
     MySQL server.

   * *To stop MySQL using the preference pane: *

     Click `Stop MySQL Server'. You may be prompted for the username
     and password of a user with administrator privileges to stop the
     MySQL server.

   * *To automatically start the MySQL server when the system boots:*

     Check the check box next to `Automatically Start MySQL Server on
     Startup'.

   * *To disable automatic MySQL server startup when the system boots:*

     Uncheck the check box next to `Automatically Start MySQL Server on
     Startup'.

You can close the `System Preferences...' window once you have
completed your settings.


File: manual.info,  Node: macosx-installation-server,  Prev: macosx-installation-prefpane,  Up: macosx-installation

2.4.5 Using the Bundled MySQL on Mac OS X Server
------------------------------------------------

If you are running Mac OS X Server, a version of MySQL should already
be installed. The following table shows the versions of MySQL that ship
with Mac OS X Server versions.

*MySQL Versions Preinstalled with Mac OS X Server*

Mac OS X Server        MySQL Version
Version                
10.2-10.2.2            3.23.51
10.2.3-10.2.6          3.23.53
10.3                   4.0.14
10.3.2                 4.0.16
10.4.0                 4.1.10a
10.5.0                 5.0.45
10.6.0                 5.0.82

The following table shows the installation layout of MySQL on Mac OS X
Server.

*MySQL Directory Layout for Preinstalled MySQL Installations on Mac OS X
Server*

Directory                 Contents of Directory
`/usr/bin'                Client programs
`/var/mysql'              Log files, databases
`/usr/libexec'            The *Note `mysqld': mysqld. server
`/usr/share/man'          Unix manual pages
`/usr/share/mysql/mysql-test'MySQL test suite
`/usr/share/mysql'        Miscellaneous support files, including error
                          messages, character set files, sample
                          configuration files, SQL for database
                          installation
`/var/mysql/mysql.sock'   Location of the MySQL Unix socket

* Additional Resources *

   * For more information on managing the bundled MySQL instance in Mac
     OS X Server 10.5, see Mac OS X Server: Web Technologies
     Administration For Version 10.5 Leopard
     (http://images.apple.com/server/macosx/docs/Web_Technologies_Admin_v10.5.pdf).

   * For more information on managing the bundled MySQL instance in Mac
     OS X Server 10.6, see Mac OS X Server: Web Technologies
     Administration Version 10.6 Snow Leopard
     (http://manuals.info.apple.com/en_US/WebTech_v10.6.pdf).

   * The MySQL server bundled with Mac OS X Server does not include the
     MySQL client libraries and header files required to access and use
     MySQL from a third-party driver, such as Perl DBI or PHP. For more
     information on obtaining and installing MySQL libraries, see Mac
     OS X Server version 10.5: MySQL libraries available for download
     (http://support.apple.com/kb/TA25017). Alternatively, you can
     ignore the bundled MySQL server and install MySQL from the package
     or tarball installation.


File: manual.info,  Node: linux-installation,  Next: uln-installation,  Prev: macosx-installation,  Up: installing

2.5 Installing MySQL on Linux
=============================

* Menu:

* linux-installation-rpm::       Installing MySQL on Linux Using RPM Packages
* linux-installation-debian::    Installing MySQL on Linux Using Debian Packages
* linux-installation-native::    Installing MySQL on Linux Using Native Package Managers

Linux supports a number of different solutions for installing MySQL.
The recommended method is to use one of the distributions from Oracle.
If you choose this method, there are several options available:

   * Installing from a generic binary package in `.tar.gz' format. See
     *Note binary-installation:: for more information.

   * Extracting and compiling MySQL from a source distribution. For
     detailed instructions, see *Note source-installation::.

   * Installing using a precompiled RPM package. For more information,
     see *Note linux-installation-rpm::.

   * Installing using a precompiled Debian package. For more
     information, see *Note linux-installation-debian::.

   * Installing using Oracle's Unbreakable Linux Network (ULN). For
     more information, see *Note uln-installation::.

As an alternative, you can use the native package manager within your
Linux distribution to automatically download and install MySQL for you.
Native package installations can take of the download and dependencies
required to run MySQL, but the MySQL version will often be some
versions behind the currently available release. You will also normally
be unable to install development releases, as these are not usually
made available in the native repository. For more information on using
the native package installers, see *Note linux-installation-native::.

*Note*:

For many Linux installations, you will want to set up MySQL to be
started automatically when your machine starts. Many of the native
package installations perform this operation for you, but for source,
binary and RPM solutions you may need to set this up separately. The
required script, *Note `mysql.server': mysql-server, can be found in
the `support-files' directory under the MySQL installation directory or
in a MySQL source tree.  You can install it as `/etc/init.d/mysql' for
automatic MySQL startup and shutdown. See *Note automatic-start::.


File: manual.info,  Node: linux-installation-rpm,  Next: linux-installation-debian,  Prev: linux-installation,  Up: linux-installation

2.5.1 Installing MySQL on Linux Using RPM Packages
--------------------------------------------------

*Note*:

To install or upgrade to MySQL 5.5.31, be sure to read the special
instructions at the end of this section.

The recommended way to install MySQL on RPM-based Linux distributions
is by using the RPM packages. The RPMs that we provide to the community
should work on all versions of Linux that support RPM packages and use
`glibc' 2.3. To obtain RPM packages, see *Note getting-mysql::.

For non-RPM Linux distributions, you can install MySQL using a
`.tar.gz' package. See *Note binary-installation::.

Installations created from our Linux RPM distributions result in files
under the system directories shown in the following table.

*MySQL Installation Layout for Linux RPM Packages*

Directory                        Contents of Directory
`/usr/bin'                       Client programs and scripts
`/usr/sbin'                      The *Note `mysqld': mysqld. server
`/var/lib/mysql'                 Log files, databases
`/usr/share/info'                Manual in Info format
`/usr/share/man'                 Unix manual pages
`/usr/include/mysql'             Include (header) files
`/usr/lib/mysql'                 Libraries
`/usr/share/mysql'               Miscellaneous support files, including
                                 error messages, character set files,
                                 sample configuration files, SQL for
                                 database installation
`/usr/share/sql-bench'           Benchmarks

*Note*:

RPM distributions of MySQL are also provided by other vendors.  Be
aware that they may differ from those built by us in features,
capabilities, and conventions (including communication setup), and that
the instructions in this manual do not necessarily apply to installing
them. The vendor's instructions should be consulted instead. Because of
these differences, RPM packages built by us check whether such RPMs
built by other vendors are installed. If so, the RPM does not install
and produces a message explaining this.

In most cases, you need to install only the `MySQL-server' and
`MySQL-client' packages to get a functional MySQL installation. The
other packages are not required for a standard installation.

RPMs for MySQL Cluster

Standard MySQL server RPMs built by MySQL do not provide support for
the *Note `NDBCLUSTER': mysql-cluster. storage engine.

*Important*:

When upgrading a MySQL Cluster RPM installation, you must upgrade _all_
installed RPMs, including the `Server' and `Client' RPMs.

For more information about installing MySQL Cluster from RPMs, see
*Note mysql-cluster-installation::.

For upgrades, if your installation was originally produced by
installing multiple RPM packages, it is best to upgrade all the
packages, not just some. For example, if you previously installed the
server and client RPMs, do not upgrade just the server RPM.

If you get a dependency failure when trying to install MySQL packages
(for example, `error: removing these packages would break dependencies:
libmysqlclient.so.10 is needed by ...'), you should also install the
`MySQL-shared-compat' package, which includes the shared libraries for
older releases for backward compatibility.

The RPM packages shown in the following list are available. The names
shown here use a suffix of `.glibc23.i386.rpm', but particular packages
can have different suffixes, described later.

   * `MySQL-server-VERSION.glibc23.i386.rpm'

     The MySQL server. You need this unless you only want to connect to
     a MySQL server running on another machine.

   * `MySQL-client-VERSION.glibc23.i386.rpm'

     The standard MySQL client programs. You probably always want to
     install this package.

   * `MySQL-devel-VERSION.glibc23.i386.rpm'

     The libraries and include files that are needed if to compile
     other MySQL clients, such as the Perl modules. Install this RPM if
     you intend to compile C API applications.

   * `MySQL-shared-VERSION.glibc23.i386.rpm'

     This package contains the shared libraries (`libmysqlclient.so*')
     that certain languages and applications need to dynamically load
     and use MySQL. It contains single-threaded and thread-safe
     libraries. Install this RPM if you intend to compile or run C API
     applications that depend on the shared client library. Prior to
     MySQL 5.5.6, if you install this package, do not install the
     `MySQL-shared-compat' package.

   * `MySQL-shared-compat-VERSION.glibc23.i386.rpm'

     This package includes the shared libraries for older releases.  It
     contains single-threaded and thread-safe libraries. Install this
     package if you have applications installed that are dynamically
     linked against older versions of MySQL but you want to upgrade to
     the current version without breaking the library dependencies.
     Before MySQL 5.5.6, `MySQL-shared-compat' also includes the
     libraries for the current release, so if you install it, you
     should not also install `MySQL-shared'. As of 5.5.6,
     `MySQL-shared-compat' does not include the current library
     version, so there is no conflict.

     As of MySQL 5.5.23, the `MySQL-shared-compat' RPM package enables
     users of Red Hat-provided `mysql-*-5.1' RPM packages to migrate to
     Oracle-provided `MySQL-*-5.5' packages.  `MySQL-shared-compat'
     replaces the Red Hat `mysql-libs' package by replacing
     `libmysqlclient.so' files of the latter package, thus satisfying
     dependencies of other packages on `mysql-libs'. This change
     affects only users of Red Hat (or Red Hat-compatible) RPM
     packages. Nothing is different for users of Oracle RPM packages.

   * `MySQL-embedded-VERSION.glibc23.i386.rpm'

     The embedded MySQL server library.

   * `MySQL-test-VERSION.glibc23.i386.rpm'

     This package includes the MySQL test suite.

   * `MySQL-VERSION.src.rpm'

     This contains the source code for all of the previous packages. It
     can also be used to rebuild the RPMs on other architectures (for
     example, Alpha or SPARC).

The suffix of RPM package names (following the VERSION value) has the
following syntax:

     .PLATFORM.CPU.rpm

The PLATFORM and CPU values indicate the type of system for which the
package is built.  PLATFORM indicates the platform and CPU indicates
the processor type or family.

All packages are dynamically linked against `glibc' 2.3. The PLATFORM
value indicates whether the package is platform independent or intended
for a specific platform, as shown in the following table.

*MySQL Linux Installation Packages*

PLATFORM Value     Intended Use
`glibc23'          Platform independent, should run on any Linux
                   distribution that supports `glibc' 2.3
`rhel4', `rhel5'   Red Hat Enterprise Linux 4 or 5
`el6'              Enterprise Linux 6
`sles10', `sles11' SuSE Linux Enterprise Server 10 or 11

In MySQL 5.5, only `glibc23' packages are available currently.

The CPU value indicates the processor type or family for which the
package is built.

*MySQL Installation Packages for Linux CPU Identifiers*

CPU Value          Intended Processor Type or Family
`i386', `i586',    Pentium processor or better, 32 bit
`i686'             
`x86_64'           64-bit x86 processor
`ia64'             Itanium (IA-64) processor

To see all files in an RPM package (for example, a `MySQL-server' RPM),
run a command like this:

     shell> rpm -qpl MySQL-server-VERSION.glibc23.i386.rpm

To perform a standard minimal installation, install the server and
client RPMs:

     shell> rpm -i MySQL-server-VERSION.glibc23.i386.rpm
     shell> rpm -i MySQL-client-VERSION.glibc23.i386.rpm

To install only the client programs, install just the client RPM:

     shell> rpm -i MySQL-client-VERSION.glibc23.i386.rpm

RPM provides a feature to verify the integrity and authenticity of
packages before installing them. To learn more about this feature, see
*Note verifying-package-integrity::.

The server RPM places data under the `/var/lib/mysql' directory. The
RPM also creates a login account for a user named `mysql' (if one does
not exist) to use for running the MySQL server, and creates the
appropriate entries in `/etc/init.d/' to start the server automatically
at boot time. (This means that if you have performed a previous
installation and have made changes to its startup script, you may want
to make a copy of the script so that you do not lose it when you
install a newer RPM.) See *Note automatic-start::, for more information
on how MySQL can be started automatically on system startup.

In MySQL 5.5.5 and later, during a new installation, the server boot
scripts are installed, but the MySQL server is not started at the end
of the installation, since the status of the server during an
unattended installation is not known.

In MySQL 5.5.5 and later, during an upgrade installation using the RPM
packages, if the MySQL server is running when the upgrade occurs, the
MySQL server is stopped, the upgrade occurs, and the MySQL server is
restarted. If the MySQL server is not already running when the RPM
upgrade occurs, the MySQL server is not started at the end of the
installation.

If something goes wrong, you can find more information in the binary
installation section. See *Note binary-installation::.

*Note*:

The accounts that are listed in the MySQL grant tables initially have
no passwords. After starting the server, you should set up passwords
for them using the instructions in *Note postinstallation::.

During RPM installation, a user named `mysql' and a group named `mysql'
are created on the system.  This is done using the `useradd',
`groupadd', and `usermod' commands. Those commands require appropriate
administrative privileges, which is required for locally managed users
and groups (as listed in the `/etc/passwd' and `/etc/group' files) by
the RPM installation process being run by `root'.

If you log in as the `mysql' user, you may find that MySQL displays
`Invalid (old?) table or database name' errors that mention `.mysqlgui',
`lost+found', `.mysqlgui', `.bash_history', `.fonts.cache-1',
`.lesshst', `.mysql_history', `.profile', `.viminfo', and similar files
created by MySQL or operating system utilities. You can safely ignore
these error messages or remove the files or directories that cause them
if you do not need them.

For nonlocal user management (LDAP, NIS, and so forth), the
administrative tools may require additional authentication (such as a
password), and will fail if the installing user does not provide this
authentication. Even if they fail, the RPM installation will not abort
but succeed, and this is intentional.  If they failed, some of the
intended transfer of ownership may be missing, and it is recommended
that the system administrator then manually ensures some appropriate
user and group exists and manually transfers ownership following the
actions in the RPM spec file.

In MySQL 5.5.31, the RPM spec file has been updated, which has the
following consequences:

   * For a non-upgrade installation (no existing MySQL version
     installed), it possible to install MySQL using `yum'.

   * For upgrades, it is necessary to clean up any earlier MySQL
     installations. In effect, the update is performed by removing the
     old installations and installing the new one.

Additional details follow.

For a non-upgrade installation of MySQL 5.5.31, it is possible to
install using `yum':

     shell> yum install MySQL-server-NEWVERSION.glibc23.i386.rpm

For upgrades to MySQL 5.5.31, the upgrade is performed by removing the
old installation and installing the new one. To do this, use the
following procedure:

  1. Remove the existing 5.5.X installation. OLDVERSION is the version
     to remove.

          shell> rpm -e MySQL-server-OLDVERSION.glibc23.i386.rpm

     Repeat this step for all installed MySQL RPMs.

  2. Install the new version. NEWVERSION is the version to install.

          shell> rpm -ivh MySQL-server-NEWVERSION.glibc23.i386.rpm

Alternatively, the removal and installation can be done using `yum':

     shell> yum remove MySQL-server-OLDVERSION.glibc23.i386.rpm
     shell> yum install MySQL-server-NEWVERSION.glibc23.i386.rpm


File: manual.info,  Node: linux-installation-debian,  Next: linux-installation-native,  Prev: linux-installation-rpm,  Up: linux-installation

2.5.2 Installing MySQL on Linux Using Debian Packages
-----------------------------------------------------

Oracle provides Debian packages for installation on Debian or
Debian-like Linux systems. To obtain a package, see *Note
getting-mysql::.

*Note*:

Debian distributions of MySQL are also provided by other vendors. Be
aware that they may differ from those built by us in features,
capabilities, and conventions (including communication setup), and that
the instructions in this manual do not necessarily apply to installing
them. The vendor's instructions should be consulted instead.

Debian package files have names in `mysql-MVER-DVER-CPU.deb' format.
MVER is the MySQL version and DVER is the Debian version. The CPU value
indicates the processor type or family for which the package is built,
as shown in the following table.

*MySQL Installation Packages for Linux CPU Identifiers*

CPU Value          Intended Processor Type or Family
`i686'             Pentium processor or better, 32 bit
`x86_64'           64-bit x86 processor

After downloading a Debian package, use the following command to
install it;

     shell> dpkg -i mysql-MVER-DVER-CPU.deb

The Debian package installs files in the `/opt/mysql/server-5.5'
directory.

You may also need to install the `libaio' library if it is not already
present on your system:

     shell> apt-get install libaio1


File: manual.info,  Node: linux-installation-native,  Prev: linux-installation-debian,  Up: linux-installation

2.5.3 Installing MySQL on Linux Using Native Package Managers
-------------------------------------------------------------

Many Linux distributions include a version of the MySQL server, client
tools, and development components into the standard package management
system built into distributions such as Fedora, Debian, Ubuntu, and
Gentoo. This section provides basic instructions for installing MySQL
using these systems.

*Important*:

Native package installations can take care of the download and
dependencies required to run MySQL, but the MySQL version will often be
some way behind the currently available release. You will also normally
be unable to install development releases, as these are not usually
made available in the native repository.

Distribution specific instructions are shown below:

   * *Red Hat Linux, Fedora, CentOS*

     For Red Hat and similar distributions, the MySQL distribution is
     divided into a number of separate packages, `mysql' for the client
     tools, `mysql-server' for the server and associated tools, and
     `mysql-libs' for the libraries.  The libraries are required if you
     want to provide connectivity from different languages and
     environments such as Perl, Python and others.

     To install, use the `yum' command to specify the packages that you
     want to install. For example:

          root-shell> yum install mysql mysql-server mysql-libs mysql-server
          Loaded plugins: presto, refresh-packagekit
          Setting up Install Process
          Resolving Dependencies
          --> Running transaction check
          ---> Package mysql.x86_64 0:5.1.48-2.fc13 set to be updated
          ---> Package mysql-libs.x86_64 0:5.1.48-2.fc13 set to be updated
          ---> Package mysql-server.x86_64 0:5.1.48-2.fc13 set to be updated
          --> Processing Dependency: perl-DBD-MySQL for package: mysql-server-5.1.48-2.fc13.x86_64
          --> Running transaction check
          ---> Package perl-DBD-MySQL.x86_64 0:4.017-1.fc13 set to be updated
          --> Finished Dependency Resolution

          Dependencies Resolved

          ================================================================================
           Package               Arch          Version               Repository      Size
          ================================================================================
          Installing:
           mysql                 x86_64        5.1.48-2.fc13         updates        889 k
           mysql-libs            x86_64        5.1.48-2.fc13         updates        1.2 M
           mysql-server          x86_64        5.1.48-2.fc13         updates        8.1 M
          Installing for dependencies:
           perl-DBD-MySQL        x86_64        4.017-1.fc13          updates        136 k

          Transaction Summary
          ================================================================================
          Install       4 Package(s)
          Upgrade       0 Package(s)

          Total download size: 10 M
          Installed size: 30 M
          Is this ok [y/N]: y
          Downloading Packages:
          Setting up and reading Presto delta metadata
          Processing delta metadata
          Package(s) data still to download: 10 M
          (1/4): mysql-5.1.48-2.fc13.x86_64.rpm                    | 889 kB     00:04
          (2/4): mysql-libs-5.1.48-2.fc13.x86_64.rpm               | 1.2 MB     00:06
          (3/4): mysql-server-5.1.48-2.fc13.x86_64.rpm             | 8.1 MB     00:40
          (4/4): perl-DBD-MySQL-4.017-1.fc13.x86_64.rpm            | 136 kB     00:00
          --------------------------------------------------------------------------------
          Total                                           201 kB/s |  10 MB     00:52
          Running rpm_check_debug
          Running Transaction Test
          Transaction Test Succeeded
          Running Transaction
            Installing     : mysql-libs-5.1.48-2.fc13.x86_64                          1/4
            Installing     : mysql-5.1.48-2.fc13.x86_64                               2/4
            Installing     : perl-DBD-MySQL-4.017-1.fc13.x86_64                       3/4
            Installing     : mysql-server-5.1.48-2.fc13.x86_64                        4/4

          Installed:
            mysql.x86_64 0:5.1.48-2.fc13            mysql-libs.x86_64 0:5.1.48-2.fc13
            mysql-server.x86_64 0:5.1.48-2.fc13

          Dependency Installed:
            perl-DBD-MySQL.x86_64 0:4.017-1.fc13

          Complete!

     MySQL and the MySQL server should now be installed. A sample
     configuration file is installed into `/etc/my.cnf'. An init
     script, to start and stop the server, will have been installed into
     `/etc/init.d/mysqld'. To start the MySQL server use `service':

          root-shell> service mysqld start

     To enable the server to be started and stopped automatically
     during boot, use `chkconfig':

          root-shell> chkconfig --levels 235 mysqld on

     Which enables the MySQL server to be started (and stopped)
     automatically at the specified the run levels.

     The database tables will have been automatically created for you,
     if they do not already exist. You should, however, run *Note
     `mysql_secure_installation': mysql-secure-installation. to set the
     root passwords on your server.

   * *Debian, Ubuntu, Kubuntu*

     On Debian and related distributions, there are two packages,
     `mysql-client' and `mysql-server', for the client and server
     components respectively. You should specify an explicit version,
     for example `mysql-client-5.1', to ensure that you install the
     version of MySQL that you want.

     To download and install, including any dependencies, use the
     `apt-get' command, specifying the packages that you want to
     install.

     *Note*:

     Before installing, make sure that you update your `apt-get' index
     files to ensure you are downloading the latest available version.

     A sample installation of the MySQL packages might look like this
     (some sections trimmed for clarity):

          root-shell> apt-get install mysql-client-5.1 mysql-server-5.1
          Reading package lists... Done
          Building dependency tree
          Reading state information... Done
          The following packages were automatically installed and are no longer required:
            linux-headers-2.6.28-11 linux-headers-2.6.28-11-generic
          Use 'apt-get autoremove' to remove them.
          The following extra packages will be installed:
            bsd-mailx libdbd-mysql-perl libdbi-perl libhtml-template-perl
            libmysqlclient15off libmysqlclient16 libnet-daemon-perl libplrpc-perl mailx
            mysql-common postfix
          Suggested packages:
            dbishell libipc-sharedcache-perl tinyca procmail postfix-mysql postfix-pgsql
            postfix-ldap postfix-pcre sasl2-bin resolvconf postfix-cdb
          The following NEW packages will be installed
            bsd-mailx libdbd-mysql-perl libdbi-perl libhtml-template-perl
            libmysqlclient15off libmysqlclient16 libnet-daemon-perl libplrpc-perl mailx
            mysql-client-5.1 mysql-common mysql-server-5.1 postfix
          0 upgraded, 13 newly installed, 0 to remove and 182 not upgraded.
          Need to get 1907kB/25.3MB of archives.
          After this operation, 59.5MB of additional disk space will be used.
          Do you want to continue [Y/n]? Y
          Get: 1 http://gb.archive.ubuntu.com jaunty-updates/main mysql-common 5.1.30really5.0.75-0ubuntu10.5 [63.6kB]
          Get: 2 http://gb.archive.ubuntu.com jaunty-updates/main libmysqlclient15off 5.1.30really5.0.75-0ubuntu10.5 [1843kB]
          Fetched 1907kB in 9s (205kB/s)
          Preconfiguring packages ...
          Selecting previously deselected package mysql-common.
          (Reading database ... 121260 files and directories currently installed.)
          ...
          Processing 1 added doc-base file(s)...
          Registering documents with scrollkeeper...
          Setting up libnet-daemon-perl (0.43-1) ...
          Setting up libplrpc-perl (0.2020-1) ...
          Setting up libdbi-perl (1.607-1) ...
          Setting up libmysqlclient15off (5.1.30really5.0.75-0ubuntu10.5) ...

          Setting up libdbd-mysql-perl (4.008-1) ...
          Setting up libmysqlclient16 (5.1.31-1ubuntu2) ...

          Setting up mysql-client-5.1 (5.1.31-1ubuntu2) ...

          Setting up mysql-server-5.1 (5.1.31-1ubuntu2) ...
           * Stopping MySQL database server mysqld
             ...done.
          100825 11:46:15  InnoDB: Started; log sequence number 0 46409
          100825 11:46:15  InnoDB: Starting shutdown...
          100825 11:46:17  InnoDB: Shutdown completed; log sequence number 0 46409
          100825 11:46:17 [Warning] Forcing shutdown of 1 plugins
           * Starting MySQL database server mysqld
             ...done.
           * Checking for corrupt, not cleanly closed and upgrade needing tables.
          ...
          Processing triggers for libc6 ...
          ldconfig deferred processing now taking place

     *Note*:

     The `apt-get' command will install a number of packages, including
     the MySQL server, in order to provide the typical tools and
     application environment. This can mean that you install a large
     number of packages in addition to the main MySQL package.

     During installation, the initial database will be created, and you
     will be prompted for the MySQL root password (and confirmation). A
     configuration file will have been created in `/etc/mysql/my.cnf'.
     An init script will have been created in `/etc/init.d/mysql'.

     The server will already be started. You can manually start and
     stop the server using:

          root-shell> service mysql [start|stop]

     The service will automatically be added to the 2, 3 and 4 run
     levels, with stop scripts in the single, shutdown and restart
     levels.

   * *Gentoo Linux*

     As a source-based distribution, installing MySQL on Gentoo
     involves downloading the source, patching the Gentoo specifics,
     and then compiling the MySQL server and installing it. This
     process is handled automatically by the `emerge' command.
     Depending on the version of MySQL that you want to install, you
     may need to unmask the specific version that you want for your
     chosen platform.

     The MySQL server and client tools are provided within a single
     package, `dev-db/mysql'. You can obtain a list of the versions
     available to install by looking at the portage directory for the
     package:

          root-shell> ls /usr/portage/dev-db/mysql/mysql-5.1*
          mysql-5.1.39-r1.ebuild
          mysql-5.1.44-r1.ebuild
          mysql-5.1.44-r2.ebuild
          mysql-5.1.44-r3.ebuild
          mysql-5.1.44.ebuild
          mysql-5.1.45-r1.ebuild
          mysql-5.1.45.ebuild
          mysql-5.1.46.ebuild

     To install a specific MySQL version, you must specify the entire
     atom. For example:

          root-shell> emerge =dev-db/mysql-5.1.46

     A simpler alternative is to use the `virtual/mysql-5.1' package,
     which will install the latest version:

          root-shell> emerge =virtual/mysql-5.1

     If the package is masked (because it is not tested or certified
     for the current platform), use the `ACCEPT_KEYWORDS' environment
     variable. For example:

          root-shell> ACCEPT_KEYWORDS="~x86" emerge =virtual/mysql-5.1

     After installation, you should create a new database using *Note
     `mysql_install_db': mysql-install-db, and set the password for the
     root user on MySQL. You can use the configuration interface to set
     the password and create the initial database:

          root-shell> emerge --config =dev-db/mysql-5.1.46

     A sample configuration file will have been created for you in
     `/etc/mysql/my.cnf', and an init script will have been created in
     `/etc/init.d/mysql'.

     To enable MySQL to start automatically at the normal (default) run
     levels, you can use:

          root-shell> rc-update add mysql default


File: manual.info,  Node: uln-installation,  Next: solaris-installation,  Prev: linux-installation,  Up: installing

2.6 Installing MySQL Using Unbreakable Linux Network (ULN)
==========================================================

Linux supports a number of different solutions for installing MySQL,
covered in *Note linux-installation::. One of the methods, covered in
this section, is installing from Oracles's Unbreakable Linux Network
(ULN). You can find information about Oracle Linux and ULN under
`http://linux.oracle.com/'.

To use ULN, you need to obtain a ULN login and register the machine
used for installation with ULN. This is described in detail in the ULN
FAQ (https://linux.oracle.com/uln_faq.html).  This page also describes
how to install and update packages.

*Note*:

At the time of writing this (September 2012), ULN provides MySQL 5.5
for Oracle Linux 6.

Once MySQL has been installed using ULN, you can find information on
starting and stopping the server, and more, in *Note this section:
linux-installation-native, particularly under *Note
linux-installation-rpm::.

If you're updating an existing MySQL installation to an installation
using ULN, the recommended procedure is to export your data using *Note
`mysqldump': mysqldump, remove the existing installation, install MySQL
from ULN, and load the exported data into your freshly installed MySQL.

If the existing MySQL installation you're upgrading from is from a
previous release series (prior to MySQL 5.5), make sure to read the
section on upgrading MySQL, *Note upgrading::.


File: manual.info,  Node: solaris-installation,  Next: hpux-installation,  Prev: uln-installation,  Up: installing

2.7 Installing MySQL on Solaris and OpenSolaris
===============================================

* Menu:

* solaris-installation-pkg::     Installing MySQL on Solaris Using a Solaris PKG
* solaris-installation-opensolaris::  Installing MySQL on OpenSolaris Using IPS

MySQL on Solaris and OpenSolaris is available in a number of different
formats.

   * For information on installing using the native Solaris PKG format,
     see *Note solaris-installation-pkg::.

   * On OpenSolaris, the standard package repositories include MySQL
     packages specially built for OpenSolaris that include entries for
     the Service Management Framework (SMF) to enable control of the
     installation using the SMF administration commands. For more
     information, see *Note solaris-installation-opensolaris::.

   * To use a standard `tar' binary installation, use the notes
     provided in *Note binary-installation::.  Check the notes and
     hints at the end of this section for Solaris specific notes that
     you may need before or after installation.

To obtain a binary MySQL distribution for Solaris in tarball or PKG
format, `http://dev.mysql.com/downloads/mysql/5.5.html'.

Additional notes to be aware of when installing and using MySQL on
Solaris:

   * If you want to use MySQL with the `mysql' user and group, use the
     `groupadd' and `useradd' commands:

          groupadd mysql
          useradd -g mysql mysql

   * If you install MySQL using a binary tarball distribution on
     Solaris, you may run into trouble even before you get the MySQL
     distribution unpacked, as the Solaris `tar' cannot handle long
     file names. This means that you may see errors when you try to
     unpack MySQL.

     If this occurs, you must use GNU `tar' (`gtar') to unpack the
     distribution. In Solaris 10 and OpenSolaris `gtar' is normally
     located in `/usr/sfw/bin/gtar', but may not be included in the
     default path definition.

   * When using Solaris 10 for x86_64, you should mount any file
     systems on which you intend to store `InnoDB' files with the
     `forcedirectio' option. (By default mounting is done without this
     option.) Failing to do so will cause a significant drop in
     performance when using the `InnoDB' storage engine on this
     platform.

   * If you would like MySQL to start automatically, you can copy
     `support-files/mysql.server' to `/etc/init.d' and create a
     symbolic link to it named `/etc/rc3.d/S99mysql.server'.

   * If too many processes try to connect very rapidly to *Note
     `mysqld': mysqld, you should see this error in the MySQL log:

          Error in accept: Protocol error

     You might try starting the server with the `--back_log=50' option
     as a workaround for this.

   * To configure the generation of core files on Solaris you should
     use the `coreadm' command. Because of the security implications of
     generating a core on a `setuid()' application, by default, Solaris
     does not support core files on `setuid()' programs. However, you
     can modify this behavior using `coreadm'. If you enable `setuid()'
     core files for the current user, they will be generated using the
     mode 600 and owned by the superuser.


File: manual.info,  Node: solaris-installation-pkg,  Next: solaris-installation-opensolaris,  Prev: solaris-installation,  Up: solaris-installation

2.7.1 Installing MySQL on Solaris Using a Solaris PKG
-----------------------------------------------------

You can install MySQL on Solaris and OpenSolaris using a binary package
using the native Solaris PKG format instead of the binary tarball
distribution.

To use this package, download the corresponding
`mysql-VERSION-solaris10-PLATFORM.pkg.gz' file, then uncompress it. For
example:

     shell> gunzip mysql-5.5.35-solaris10-x86_64.pkg.gz

To install a new package, use `pkgadd' and follow the onscreen prompts.
You must have root privileges to perform this operation:

     shell> pkgadd -d mysql-5.5.35-solaris10-x86_64.pkg

     The following packages are available:
       1  mysql     MySQL Community Server (GPL)
                    (i86pc) 5.5.35

     Select package(s) you wish to process (or 'all' to process
     all packages). (default: all) [?,??,q]:

The PKG installer installs all of the files and tools needed, and then
initializes your database if one does not exist. To complete the
installation, you should set the root password for MySQL as provided in
the instructions at the end of the installation.  Alternatively, you
can run the *Note `mysql_secure_installation':
mysql-secure-installation. script that comes with the installation.

By default, the PKG package installs MySQL under the root path
`/opt/mysql'. You can change only the installation root path when using
`pkgadd', which can be used to install MySQL in a different Solaris
zone. If you need to install in a specific directory, use a binary
`tar' file distribution.

The `pkg' installer copies a suitable startup script for MySQL into
`/etc/init.d/mysql'. To enable MySQL to startup and shutdown
automatically, you should create a link between this file and the init
script directories.  For example, to ensure safe startup and shutdown
of MySQL you could use the following commands to add the right links:

     shell> ln /etc/init.d/mysql /etc/rc3.d/S91mysql
     shell> ln /etc/init.d/mysql /etc/rc0.d/K02mysql

To remove MySQL, the installed package name is `mysql'. You can use
this in combination with the `pkgrm' command to remove the installation.

To upgrade when using the Solaris package file format, you must remove
the existing installation before installing the updated package.
Removal of the package does not delete the existing database
information, only the server, binaries and support files.  The typical
upgrade sequence is therefore:

     shell> mysqladmin shutdown
     shell> pkgrm mysql
     shell> pkgadd -d mysql-5.5.35-solaris10-x86_64.pkg
     shell> mysqld_safe &
     shell> mysql_upgrade

You should check the notes in *Note upgrading-downgrading:: before
performing any upgrade.


File: manual.info,  Node: solaris-installation-opensolaris,  Prev: solaris-installation-pkg,  Up: solaris-installation

2.7.2 Installing MySQL on OpenSolaris Using IPS
-----------------------------------------------

OpenSolaris includes standard packages for MySQL in the core
repository. The MySQL packages are based on a specific release of MySQL
and updated periodically. For the latest release you must use either
the native Solaris PKG, `tar', or source installations. The native
OpenSolaris packages include SMF files so that you can easily control
your MySQL installation, including automatic startup and recovery,
using the native service management tools.

To install MySQL on OpenSolaris, use the `pkg' command. You will need
to be logged in as root, or use the `pfexec' tool, as shown in the
example below:

     shell> pfexec pkg install SUNWmysql55

The package set installs three individual packages, `SUNWmysql55lib',
which contains the MySQL client libraries; `SUNWmysql55r' which contains
the root components, including SMF and configuration files; and
`SUNWmysql55u' which contains the scripts, binary tools and other
files. You can install these packages individually if you only need the
corresponding components.

The MySQL files are installed into `/usr/mysql' which symbolic links
for the sub directories (`bin', `lib', etc.) to a version specific
directory. For MySQL 5.5, the full installation is located in
`/usr/mysql/5.5'. The default data directory is `/var/mysql/5.5/data'.
The configuration file is installed in `/etc/mysql/5.5/my.cnf'. This
layout permits multiple versions of MySQL to be installed, without
overwriting the data and binaries from other versions.

Once installed, you must run *Note `mysql_install_db': mysql-install-db.
to initialize the database, and use the *Note
`mysql_secure_installation': mysql-secure-installation. to secure your
installation.

* Using SMF to manage your MySQL installation *

Once installed, you can start and stop your MySQL server using the
installed SMF configuration. The service name is `mysql', or if you
have multiple versions installed, you should use the full version name,
for example `mysql:version_55'. To start and enable MySQL to be started
at boot time:

     shell> svcadm enable mysql

To disable MySQL from starting during boot time, and shut the MySQL
server down if it is running, use:

     shell> svcadm disable mysql

To restart MySQL, for example after a configuration file changes, use
the `restart' option:

     shell> svcadm restart mysql

You can also use SMF to configure the data directory and enable full
64-bit mode. For example, to set the data directory used by MySQL:

     shell> svccfg
     svc:> select mysql:version_55
     svc:/application/database/mysql:version_55> setprop mysql/data=/data0/mysql

By default, the 32-bit binaries are used. To enable the 64-bit server
on 64-bit platforms, set the `enable_64bit' parameter. For example:

     svc:/application/database/mysql:version_55> setprop mysql/enable_64bit=1

You need to refresh the SMF after settings these options:

     shell> svcadm refresh mysql


File: manual.info,  Node: hpux-installation,  Next: freebsd-installation,  Prev: solaris-installation,  Up: installing

2.8 Installing MySQL on HP-UX
=============================

* Menu:

* hpux-installation-general::    General Notes on Installing MySQL on HP-UX
* hpux-installation-depot::      Installing MySQL on HP-UX Using DEPOT Packages

MySQL for HP-UX is available in a number of different forms:

   * Using a DEPOT distribution provided at
     `http://dev.mysql.com/downloads/'. Please read the *Note general
     notes on HP-UX installation: hpux-installation-general. before
     continuing. For more information on DEPOT installations, see *Note
     hpux-installation-depot::.

   * Using a binary tarball distribution provided at
     `http://dev.mysql.com/downloads/'. Please read the *Note general
     notes on HP-UX installation: hpux-installation-general. before
     continuing. For more information on binary installations, see
     *Note binary-installation::.


File: manual.info,  Node: hpux-installation-general,  Next: hpux-installation-depot,  Prev: hpux-installation,  Up: hpux-installation

2.8.1 General Notes on Installing MySQL on HP-UX
------------------------------------------------

Some additional notes on installing and using MySQL on HP-UX:

   * If you install MySQL using a binary tarball distribution on HP-UX,
     you may run into trouble even before you get the MySQL
     distribution unpacked, as the HP-UX `tar' cannot handle long file
     names. This means that you may see errors when you try to unpack
     MySQL.

     If this occurs, you must use GNU `tar' (`gtar') to unpack the
     distribution.

   * Because of some critical bugs in the standard HP-UX libraries, you
     should install the following patches before trying to run MySQL on
     HP-UX 11.0:

          PHKL_22840 Streams cumulative
          PHNE_22397 ARPA cumulative

     This solves the problem of getting `EWOULDBLOCK' from `recv()' and
     `EBADF' from `accept()' in threaded applications.


File: manual.info,  Node: hpux-installation-depot,  Prev: hpux-installation-general,  Up: hpux-installation

2.8.2 Installing MySQL on HP-UX Using DEPOT Packages
----------------------------------------------------

The HP-UX DEPOT format packages can be installed using the `swinstall'
command. You should install the `ncurses' and `zlib' libraries before
installing the MySQL DEPOT package. You can use the free software
`depothelper' tool to install these packages and any dependencies for
you automatically.

To install using the MySQL DEPOT packages, follow this guide:

  1. Download the MySQL DEPOT package from
     `http://dev.mysql.com/downloads/'. You must uncompress the package
     before installation:

          root-shell> gunzip mysql-5.1.48-hpux11.31-ia64-64bit.depot.gz

  2. Install the DEPOT package using `swinstall':

          root-shell> swinstall -s MYSQL-5.1.49-HPUX11.31-IA64-64BIT.DEPOT

     MySQL will be installed into a directory matching the depot
     package name, within `/usr/local'. For convenience, you may want
     to create a symbolic link to the installed directory, for example:

          root-shell> ln -s mysql-5.1.49-hpux11.31-ia64-64bit mysql

  3. Your package is now installed. You should complete the
     configuration of MySQL by creating a user and group:

          root-shell> /usr/sbin/groupadd mysql
          root-shell> /usr/sbin/useradd -g mysql -d /var/lib/mysql/ -s /bin/false mysql

  4. Create the standard database using the new user/group you have
     created, and set the permissions:

          root-shell> cd /usr/local/
          root-shell> scripts/mysql_install_db --user=mysql
          root-shell> chown -R root .
          root-shell> chown -R mysql data

  5. Finally, secure your new installation by setting the root
     passwords, and then start your MySQL server using the `mysql' user:

          root-shell> mysql_secure_installation
          root-shell> mysqld_safe --user=mysql &


File: manual.info,  Node: freebsd-installation,  Next: source-installation,  Prev: hpux-installation,  Up: installing

2.9 Installing MySQL on FreeBSD
===============================

This section provides information about installing MySQL on variants of
FreeBSD Unix.

You can install MySQL on FreeBSD by using the binary distribution
provided by Oracle. For more information, see *Note
binary-installation::.

The easiest (and preferred) way to install MySQL is to use the *Note
`mysql-server': mysql-server. and `mysql-client' ports available at
`http://www.freebsd.org/'. Using these ports gives you the following
benefits:

   * A working MySQL with all optimizations enabled that are known to
     work on your version of FreeBSD.

   * Automatic configuration and build.

   * Startup scripts installed in `/usr/local/etc/rc.d'.

   * The ability to use `pkg_info -L' to see which files are installed.

   * The ability to use `pkg_delete' to remove MySQL if you no longer
     want it on your machine.

The MySQL build process requires GNU make (`gmake') to work. If GNU
`make' is not available, you must install it first before compiling
MySQL.

To install using the ports system:

     # cd /usr/ports/databases/mysql51-server
     # make
     ...
     # cd /usr/ports/databases/mysql51-client
     # make
     ...

The standard port installation places the server into
`/usr/local/libexec/mysqld', with the startup script for the MySQL
server placed in `/usr/local/etc/rc.d/mysql-server'.

Some additional notes on the BSD implementation:

   * To remove MySQL after installation using the ports system:

          # cd /usr/ports/databases/mysql51-server
          # make deinstall
          ...
          # cd /usr/ports/databases/mysql51-client
          # make deinstall
          ...

   * If you get problems with the current date in MySQL, setting the
     `TZ' variable should help. See *Note environment-variables::.


File: manual.info,  Node: source-installation,  Next: postinstallation,  Prev: freebsd-installation,  Up: installing

2.10 Installing MySQL from Source
=================================

* Menu:

* source-installation-layout::   MySQL Layout for Source Installation
* installing-source-distribution::  Installing MySQL Using a Standard Source Distribution
* installing-development-tree::  Installing MySQL Using a Development Source Tree
* source-configuration-options::  MySQL Source-Configuration Options
* compilation-problems::         Dealing with Problems Compiling MySQL
* source-configuration-third-party::  MySQL Configuration and Third-Party Tools

Building MySQL from the source code enables you to customize build
parameters, compiler optimizations, and installation location. For a
list of systems on which MySQL is known to run, see *Note
supported-os::.

Before you proceed with an installation from source, check whether
Oracle produces a precompiled binary distribution for your platform and
whether it works for you. We put a great deal of effort into ensuring
that our binaries are built with the best possible options for optimal
performance. Instructions for installing binary distributions are
available in *Note binary-installation::.

*Note*:

This section describes how to build MySQL from source using `CMake'.
Before MySQL 5.5, source builds used the GNU autotools on Unix-like
systems. Source builds on Windows used `CMake', but the process was
different from that described here. For source-building instructions
for older versions of MySQL, see Installing MySQL from Source
(http://dev.mysql.com/doc/refman/5.1/en/source-installation.html), in
the MySQL 5.1 Reference Manual. If you are familiar with autotools but
not `CMake', you might find these transition instructions helpful:
Autotools to CMake Transition Guide
(http://dev.mysql.com/doc/internals/en/autotools-to-cmake.html)

* Source Installation Methods *

There are two methods for installing MySQL from source:

   * Use a standard MySQL source distribution. To obtain a standard
     distribution, see *Note getting-mysql::. For instructions on
     building from a standard distribution, see *Note
     installing-source-distribution::.

     Standard distributions are available as compressed `tar' files,
     Zip archives, or RPM packages.  Distribution files have names of
     the form `mysql-VERSION.tar.gz', `mysql-VERSION.zip', or
     `mysql-VERSION.rpm', where VERSION is a number like `5.5.35'. File
     names for source distributions can be distinguished from those for
     precompiled binary distributions in that source distribution names
     are generic and include no platform name, whereas binary
     distribution names include a platform name indicating the type of
     system for which the distribution is intended (for example,
     `pc-linux-i686' or `winx64').

   * Use a MySQL development tree. Development trees have not
     necessarily received the same level of testing as standard release
     distributions, so this installation method is usually required
     only if you need the most recent code changes. For information on
     building from one of the development trees, see *Note
     installing-development-tree::.

* Source Installation System Requirements *

Installation of MySQL from source requires several development tools.
Some of these tools are needed no matter whether you use a standard
source distribution or a development source tree. Other tool
requirements depend on which installation method you use.

To install MySQL from source, your system must have the following
tools, regardless of installation method:

   * `CMake', which is used as the build framework on all platforms.
     `CMake' can be downloaded from `http://www.cmake.org'.

   * A good `make' program. Although some platforms come with their own
     `make' implementations, it is highly recommended that you use GNU
     `make' 3.75 or newer. It may already be available on your system as
     `gmake'. GNU `make' is available from
     `http://www.gnu.org/software/make/'.

   * A working ANSI C++ compiler. GCC 4.2.1 or later, Sun Studio 10 or
     later, Visual Studio 2008 or later, and many current
     vendor-supplied compilers are known to work.

   * Perl is needed if you intend to run test scripts. Most Unix-like
     systems include Perl. On Windows, you can use a version such as
     ActiveState Perl.

To install MySQL from a standard source distribution, one of the
following tools is required to unpack the distribution file:

   * For a `.tar.gz' compressed `tar' file: GNU `gunzip' to uncompress
     the distribution and a reasonable `tar' to unpack it. If your
     `tar' program supports the `z' option, it can both uncompress and
     unpack the file.

     GNU `tar' is known to work. The standard `tar' provided with some
     operating systems is not able to unpack the long file names in the
     MySQL distribution. You should download and install GNU `tar', or
     if available, use a preinstalled version of GNU tar. Usually this
     is available as `gnutar', `gtar', or as `tar' within a GNU or Free
     Software directory, such as `/usr/sfw/bin' or `/usr/local/bin'.
     GNU `tar' is available from `http://www.gnu.org/software/tar/'.

   * For a `.zip' Zip archive: `WinZip' or another tool that can read
     `.zip' files.

   * For an `.rpm' RPM package: The `rpmbuild' program used to build the
     distribution unpacks it.

To install MySQL from a development source tree, the following
additional tools are required:

   * To obtain the source tree, you must have Bazaar installed. The
     Bazaar VCS Web site (http://bazaar-vcs.org) has instructions for
     downloading and installing Bazaar on different platforms. Bazaar
     is supported on any platform that supports Python, and is
     therefore compatible with any Linux, Unix, Windows, or Mac OS X
     host.

   * `bison' is needed to generate `sql_yacc.cc' from `sql_yacc.yy' You
     should use the latest version of `bison' where possible. Versions
     1.75 and 2.1 are known to work. There have been reported problems
     with `bison' 1.875. If you experience problems, upgrade to a
     later, rather than earlier, version.

     `bison' is available from `http://www.gnu.org/software/bison/'.
     `bison' for Windows can be downloaded from
     `http://gnuwin32.sourceforge.net/packages/bison.htm'.  Download
     the package labeled `Complete package, excluding sources'. On
     Windows, the default location for `bison' is the `C:\Program
     Files\GnuWin32' directory. Some utilities may fail to find `bison'
     because of the space in the directory name. Also, Visual Studio
     may simply hang if there are spaces in the path. You can resolve
     these problems by installing into a directory that does not
     contain a space; for example `C:\GnuWin32'.

   * On OpenSolaris and Solaris Express, `m4' must be installed in
     addition to `bison'.  `m4' is available from
     `http://www.gnu.org/software/m4/'.

*Note*:

If you have to install any programs, modify your `PATH' environment
variable to include any directories in which the programs are located.
See *Note setting-environment-variables::.

If you run into problems and need to file a bug report, please use the
instructions in *Note bug-reports::.


File: manual.info,  Node: source-installation-layout,  Next: installing-source-distribution,  Prev: source-installation,  Up: source-installation

2.10.1 MySQL Layout for Source Installation
-------------------------------------------

By default, when you install MySQL after compiling it from source, the
installation step installs files under `/usr/local/mysql'. The
component locations under the installation directory are the same as
for binary distributions. See *Note binary-installation-layout::, and
*Note windows-installation-layout::. To configure installation
locations different from the defaults, use the options described at
*Note source-configuration-options::.


File: manual.info,  Node: installing-source-distribution,  Next: installing-development-tree,  Prev: source-installation-layout,  Up: source-installation

2.10.2 Installing MySQL Using a Standard Source Distribution
------------------------------------------------------------

To install MySQL from a standard source distribution:

  1. Verify that your system satisfies the tool requirements listed at
     *Note source-installation::.

  2. Obtain a distribution file using the instructions in *Note
     getting-mysql::.

  3. Configure, build, and install the distribution using the
     instructions in this section.

  4. Perform postinstallation procedures using the instructions in
     *Note postinstallation::.

In MySQL 5.5, `CMake' is used as the build framework on all platforms.
The instructions given here should enable you to produce a working
installation. For additional information on using `CMake' to build
MySQL, see How to Build MySQL Server with CMake
(http://dev.mysql.com/doc/internals/en/cmake.html).

If you start from a source RPM, use the following command to make a
binary RPM that you can install. If you do not have `rpmbuild', use
`rpm' instead.

     shell> rpmbuild --rebuild --clean MySQL-VERSION.src.rpm

The result is one or more binary RPM packages that you install as
indicated in *Note linux-installation-rpm::.

The sequence for installation from a compressed `tar' file or Zip
archive source distribution is similar to the process for installing
from a generic binary distribution (see *Note binary-installation::),
except that it is used on all platforms and includes steps to configure
and compile the distribution. For example, with a compressed `tar' file
source distribution on Unix, the basic installation command sequence
looks like this:

     # Preconfiguration setup
     shell> groupadd mysql
     shell> useradd -r -g mysql mysql
     # Beginning of source-build specific instructions
     shell> tar zxvf mysql-VERSION.tar.gz
     shell> cd mysql-VERSION
     shell> cmake .
     shell> make
     shell> make install
     # End of source-build specific instructions
     # Postinstallation setup
     shell> cd /usr/local/mysql
     shell> chown -R mysql .
     shell> chgrp -R mysql .
     shell> scripts/mysql_install_db --user=mysql
     shell> chown -R root .
     shell> chown -R mysql data
     # Next command is optional
     shell> cp support-files/my-medium.cnf /etc/my.cnf
     shell> bin/mysqld_safe --user=mysql &
     # Next command is optional
     shell> cp support-files/mysql.server /etc/init.d/mysql.server

A more detailed version of the source-build specific instructions is
shown following.

*Note*:

The procedure shown here does not set up any passwords for MySQL
accounts. After following the procedure, proceed to *Note
postinstallation::, for postinstallation setup and testing.

* Perform Preconfiguration Setup *

On Unix, set up the `mysql' user and group that will be used to run and
execute the MySQL server and own the database directory. For details,
see Creating a `mysql' System User and Group, in *Note
binary-installation::. Then perform the following steps as the `mysql'
user, except as noted.

* Obtain and Unpack the Distribution *

Pick the directory under which you want to unpack the distribution and
change location into it.

Obtain a distribution file using the instructions in *Note
getting-mysql::.

Unpack the distribution into the current directory:

   * To unpack a compressed `tar' file, `tar' can uncompress and unpack
     the distribution if it has `z' option support:

          shell> tar zxvf mysql-VERSION.tar.gz

     If your `tar' does not have `z' option support, use `gunzip' to
     unpack the distribution and `tar' to unpack it:

          shell> gunzip < mysql-VERSION.tar.gz | tar xvf -

     Alternatively, `CMake' can uncompress and unpack the distribution:

          shell> cmake -E tar zxvf mysql-VERSION.tar.gz

   * To unpack a Zip archive, use `WinZip' or another tool that can
     read `.zip' files.

Unpacking the distribution file creates a directory named
`mysql-VERSION'.

* Configure the Distribution *

Change location into the top-level directory of the unpacked
distribution:

     shell> cd mysql-VERSION

Configure the source directory. The minimum configuration command
includes no options to override configuration defaults:

     shell> cmake .

On Windows, specify the development environment. For example, the
following commands configure MySQL for 32-bit or 64-bit builds,
respectively:

     shell> cmake . -G "Visual Studio 9 2008"
     shell> cmake . -G "Visual Studio 9 2008 Win64"

On Mac OS X, to use the Xcode IDE:

     shell> cmake . -G Xcode

When you run `cmake', you might want to add options to the command
line. Here are some examples:

   * `-DBUILD_CONFIG=mysql_release': Configure the source with the same
     build options used by Oracle to produce binary distributions for
     official MySQL releases.

   * `-DCMAKE_INSTALL_PREFIX=DIR_NAME': Configure the distribution for
     installation under a particular location.

   * `-DCPACK_MONOLITHIC_INSTALL=1': Cause `make package' to generate a
     single installation file rather than multiple files.

   * `-DWITH_DEBUG=1': Build the distribution with debugging support.

For a more extensive list of options, see *Note
source-configuration-options::.

To list the configuration options, use one of the following commands:

     shell> cmake . -L   # overview
     shell> cmake . -LH  # overview with help text
     shell> cmake . -LAH # all params with help text
     shell> ccmake .     # interactive display

If `CMake' fails, you might need to reconfigure by running it again
with different options. If you do reconfigure, take note of the
following:

   * If `CMake' is run after it has previously been run, it may use
     information that was gathered during its previous invocation. This
     information is stored in `CMakeCache.txt'. When `CMake' starts up,
     it looks for that file and reads its contents if it exists, on the
     assumption that the information is still correct. That assumption
     is invalid when you reconfigure.

   * Each time you run `CMake', you must run `make' again to recompile.
     However, you may want to remove old object files from previous
     builds first because they were compiled using different
     configuration options.

To prevent old object files or configuration information from being
used, run these commands on Unix before re-running `CMake':

     shell> make clean
     shell> rm CMakeCache.txt

Or, on Windows:

     shell> devenv MySQL.sln /clean
     shell> del CMakeCache.txt

If you build out of the source tree (as described later), the
`CMakeCache.txt' file and all built files are in the build directory,
so you can remove that directory to object files and cached
configuration information.

If you are going to send mail to a MySQL mailing list to ask for
configuration assistance, first check the files in the `CMakeFiles'
directory for useful information about the failure. To file a bug
report, please use the instructions in *Note bug-reports::.

* Build the Distribution *

On Unix:

     shell> make
     shell> make VERBOSE=1

The second command sets `VERBOSE' to show the commands for each
compiled source.

Use `gmake' instead on systems where you are using GNU `make' and it
has been installed as `gmake'.

On Windows:

     shell> devenv MySQL.sln /build RelWithDebInfo

It is possible to build out of the source tree to keep the tree clean.
If the top-level source directory is named `mysql-src' under your
current working directory, you can build in a directory named `build'
at the same level like this:

     shell> mkdir build
     shell> cd build
     shell> cmake ../mysql-src

If you have gotten to the compilation stage, but the distribution does
not build, see *Note compilation-problems::, for help. If that does not
solve the problem, please enter it into our bugs database using the
instructions given in *Note bug-reports::. If you have installed the
latest versions of the required tools, and they crash trying to process
our configuration files, please report that also. However, if you get a
`command not found' error or a similar problem for required tools, do
not report it. Instead, make sure that all the required tools are
installed and that your `PATH' variable is set correctly so that your
shell can find them.

* Install the Distribution *

On Unix:

     shell> make install

This installs the files under the configured installation directory (by
default, `/usr/local/mysql'). You might need to run the command as
`root'.

To install in a specific directory, add a `DESTDIR' parameter to the
command line:

     shell> make install DESTDIR="/opt/mysql"

Alternatively, generate installation package files that you can install
where you like:

     shell> make package

This operation produces one or more `.tar.gz' files that can be
installed like generic binary distribution packages. See *Note
binary-installation::. If you run `CMake' with
`-DCPACK_MONOLITHIC_INSTALL=1', the operation produces a single file.
Otherwise, it produces multiple files.

On Windows, generate the data directory, then create a `.zip' archive
installation package:

     shell> devenv MySQL.sln /build RelWithDebInfo /project initial_database
     shell> devenv MySQL.sln /build RelWithDebInfo /project package

You can install the resulting `.zip' archive where you like. See *Note
windows-install-archive::.

* Perform Postinstallation Setup *

The remainder of the installation process involves setting up the
configuration file, creating the core databases, and starting the MySQL
server. For instructions, see *Note postinstallation::.

*Note*:

The accounts that are listed in the MySQL grant tables initially have
no passwords. After starting the server, you should set up passwords
for them using the instructions in *Note postinstallation::.


File: manual.info,  Node: installing-development-tree,  Next: source-configuration-options,  Prev: installing-source-distribution,  Up: source-installation

2.10.3 Installing MySQL Using a Development Source Tree
-------------------------------------------------------

This section discusses how to install MySQL from the latest development
source code. Development trees have not necessarily received the same
level of testing as standard release distributions, so this
installation method is usually required only if you need the most
recent code changes. Do not use a development tree for production
systems. If your goal is simply to get MySQL up and running on your
system, you should use a standard release distribution (either a binary
or source distribution). See *Note getting-mysql::.

MySQL development projects are hosted on Launchpad
(http://launchpad.net/). MySQL projects, including MySQL Server, MySQL
Workbench, and others are available from the Oracle/MySQL Engineering
(http://launchpad.net/~mysql) page. For the repositories related only to
MySQL Server, see the MySQL Server (http://launchpad.net/mysql-server)
page.

To install MySQL from a development source tree, your system must
satisfy the tool requirements listed at *Note source-installation::,
including the requirements for Bazaar and `bison'.

To create a local branch of the MySQL development tree on your machine,
use this procedure:

  1. To obtain a copy of the MySQL source code, you must create a new
     Bazaar branch. If you do not already have a Bazaar repository
     directory set up, you must initialize a new directory:

          shell> mkdir mysql-server
          shell> bzr init-repo --trees mysql-server

     This is a one-time operation.

  2. Assuming that you have an initialized repository directory, you
     can branch from the public MySQL server repositories to create a
     local source tree. To create a branch of a specific version:

          shell> cd mysql-server
          shell> bzr branch lp:mysql-server/5.5 mysql-5.5

     This is a one-time operation per source tree. You can branch the
     source trees for several versions of MySQL under the
     `mysql-server' directory.

  3. The initial download will take some time to complete, depending on
     the speed of your connection. Please be patient.  Once you have
     downloaded the first tree, additional trees should take
     significantly less time to download.

  4. When building from the Bazaar branch, you may want to create a
     copy of your active branch so that you can make configuration and
     other changes without affecting the original branch contents. You
     can achieve this by branching from the original branch:

          shell> bzr branch mysql-5.5 mysql-5.5-build

  5. To obtain changes made after you have set up the branch initially,
     update it using the `pull' option periodically. Use this command
     in the top-level directory of the local copy:

          shell> bzr pull

     To examine the changeset comments for the tree, use the `log'
     option to `bzr':

          shell> bzr log

     You can also browse changesets, comments, and source code online
     at the Launchpad MySQL Server (http://launchpad.net/mysql-server)
     page.

     If you see diffs (changes) or code that you have a question about,
     do not hesitate to send email to the MySQL `internals' mailing
     list. See *Note mailing-lists::. If you think you have a better
     idea on how to do something, send an email message to the list
     with a patch.

After you have the local branch, you can build MySQL server from the
source code. For information, see *Note
installing-source-distribution::, except that you skip the part about
obtaining and unpacking the distribution.

Be careful about installing a build from a distribution source tree on
a production machine. The installation command may overwrite your live
release installation. If you already have MySQL installed and do not
want to overwrite it, run `CMake' with values for the
`CMAKE_INSTALL_PREFIX', `MYSQL_TCP_PORT', and `MYSQL_UNIX_ADDR' options
different from those used by your production server. For additional
information about preventing multiple servers from interfering with
each other, see *Note multiple-servers::.

Play hard with your new installation. For example, try to make new
features crash. Start by running `make test'. See *Note
mysql-test-suite::.


File: manual.info,  Node: source-configuration-options,  Next: compilation-problems,  Prev: installing-development-tree,  Up: source-installation

2.10.4 MySQL Source-Configuration Options
-----------------------------------------

The `CMake' program provides a great deal of control over how you
configure a MySQL source distribution.  Typically, you do this using
options on the `CMake' command line. For information about options
supported by `CMake', run either of these commands in the top-level
source directory:

     shell> cmake . -LH
     shell> ccmake .

You can also affect `CMake' using certain environment variables. See
*Note environment-variables::.

The following table shows the available `CMake' options. In the
`Default' column, `PREFIX' stands for the value of the
`CMAKE_INSTALL_PREFIX' option, which specifies the installation base
directory. This value is used as the parent location for several of the
installation subdirectories.

*MySQL Source-Configuration Option Reference (`CMake')*

Formats                Description            Default        IntroducedRemoved
`BUILD_CONFIG'         Use same build         `'             5.5.7   
                       options as official                           
                       releases                                      
`CMAKE_BUILD_TYPE'     Type of build to       `RelWithDebInfo'5.5.7   
                       produce                                       
`CMAKE_INSTALL_PREFIX' Installation base      `/usr/local/mysql'5.5.8   
                       directory                                     
`COMPILATION_COMMENT'  Comment about          `'             5.5.7   
                       compilation                                   
                       environment                                   
`CPACK_MONOLITHIC_INSTALL'Whether package build  `OFF'          5.5.7   
                       produces single file                          
`DEFAULT_CHARSET'      The default server     `latin1'       5.5.7   
                       character set                                 
`DEFAULT_COLLATION'    The default server     `latin1_swedish_ci'5.5.7   
                       collation                                     
`ENABLE_DEBUG_SYNC'    Whether to enable      `ON'           5.5.7   
                       Debug Sync support                            
`ENABLE_DOWNLOADS'     Whether to download    `OFF'          5.5.7   
                       optional files                                
`ENABLE_DTRACE'        Whether to include     `'             5.5.7   
                       DTrace support                                
`ENABLE_GCOV'          Whether to include     `'             5.5.14  
                       gcov support                                  
`ENABLED_LOCAL_INFILE' Whether to enable      `OFF'          5.5.7   
                       LOCAL for LOAD DATA                           
                       INFILE                                        
`ENABLED_PROFILING'    Whether to enable      `ON'           5.5.7   
                       query profiling code                          
`IGNORE_AIO_CHECK'     With                   `OFF'          5.5.9   
                       -DBUILD_CONFIG=mysql_release,                       
                       ignore libaio check                           
`INSTALL_BINDIR'       User executables       `PREFIX/bin'   5.5.7   
                       directory                                     
`INSTALL_DOCDIR'       Documentation          `PREFIX/docs'  5.5.7   
                       directory                                     
`INSTALL_DOCREADMEDIR' README file directory  `PREFIX'       5.5.7   
`INSTALL_INCLUDEDIR'   Header file directory  `PREFIX/include'5.5.7   
`INSTALL_INFODIR'      Info file directory    `PREFIX/docs'  5.5.7   
`INSTALL_LAYOUT'       Select predefined      `STANDALONE'   5.5.7   
                       installation layout                           
`INSTALL_LIBDIR'       Library file directory `PREFIX/lib'   5.5.7   
`INSTALL_MANDIR'       Manual page directory  `PREFIX/man'   5.5.7   
`INSTALL_MYSQLSHAREDIR'Shared data directory  `PREFIX/share' 5.5.7   
`INSTALL_MYSQLTESTDIR' mysql-test directory   `PREFIX/mysql-test'5.5.7   
`INSTALL_PLUGINDIR'    Plugin directory       `PREFIX/lib/plugin'5.5.7   
`INSTALL_SBINDIR'      Server executable      `PREFIX/bin'   5.5.7   
                       directory                                     
`INSTALL_SCRIPTDIR'    Scripts directory      `PREFIX/scripts'5.5.7   
`INSTALL_SHAREDIR'     aclocal/mysql.m4       `PREFIX/share' 5.5.7   
                       installation directory                        
`INSTALL_SQLBENCHDIR'  sql-bench directory    `PREFIX'       5.5.7   
`INSTALL_SUPPORTFILESDIR'Extra support files    `PREFIX/support-files'5.5.7   
                       directory                                     
`MEMCACHED_HOME'       Path to memcached      `[none]'       5.5.16-ndb-7.2.2
`MYSQL_DATADIR'        Data directory         `'             5.5.7   
`MYSQL_MAINTAINER_MODE'Whether to enable      `OFF'          5.5.7   
                       MySQL                                         
                       maintainer-specific                           
                       development                                   
                       environment                                   
`MYSQL_PROJECT_NAME'   Windows/Mac OS X       `3306'         5.5.21  
                       project name                                  
`MYSQL_TCP_PORT'       TCP/IP port number     `3306'         5.5.7   
`MYSQL_UNIX_ADDR'      Unix socket file       `/tmp/mysql.sock'5.5.7   
`ODBC_INCLUDES'        ODBC includes          `'                     
                       directory                                     
`ODBC_LIB_DIR'         ODBC library directory `'                     
`SYSCONFDIR'           Option file directory  `'             5.5.7   
`WITH_BUNDLED_LIBEVENT'Use bundled libevent   `ON'           5.5.16-ndb-7.2.2
                       when building                                 
                       ndbmemcache                                   
`WITH_BUNDLED_MEMCACHED'Use bundled memcached  `ON'           5.5.16-ndb-7.2.2
                       when building                                 
                       ndbmemcache                                   
`WITH_CLASSPATH'       Classpath to use when  `'                     
                       building MySQL                                
                       Cluster Connector for                         
                       Java. Default is an                           
                       empty string.                                 
`WITH_DEBUG'           Whether to include     `OFF'          5.5.7   
                       debugging support                             
`WITH_EMBEDDED_SERVER' Whether to build       `OFF'          5.5.7   
                       embedded server                               
`WITH_xxx_STORAGE_ENGINE'Compile storage        `'             5.5.7   
                       engine xxx statically                         
                       into server                                   
`WITH_ERROR_INSERT'    Enable error           `OFF'                  
                       injection in the NDB                          
                       storage engine.                               
                       Should not be used                            
                       for building binaries                         
                       intended for                                  
                       production.                                   
`WITH_EXTRA_CHARSETS'  Which extra character  `all'          5.5.7   
                       sets to include                               
`WITH_LIBEDIT'         Use bundled libedit    `ON'           5.5.7   
                       library                                       
`WITH_LIBWRAP'         Whether to include     `OFF'          5.5.7   
                       libwrap (TCP                                  
                       wrappers) support                             
`WITH_NDB_BINLOG'      Enable binary logging  `ON'                   
                       by default by mysqld.                         
`WITH_NDB_DEBUG'       Produce a debug build  `OFF'                  
                       for testing or                                
                       troubleshooting.                              
`WITH_NDB_JAVA'        Enable building of     `ON'           5.5.27-ndb-7.2.9
                       Java and ClusterJ                             
                       support. Enabled by                           
                       default. Supported in                         
                       MySQL Cluster only.                           
`WITH_NDB_PORT'        Default port used by   `[none]'               
                       a management server                           
                       built with this                               
                       option. If this                               
                       option was not used                           
                       to build it, the                              
                       management server's                           
                       default port is 1186.                         
`WITH_NDB_TEST'        Include NDB API test   `OFF'                  
                       programs.                                     
`WITH_NDBCLUSTER_STORAGE_ENGINE'Build the NDB storage  `ON'                   
                       engine                                        
`WITH_NDBMTD'          Build multi-threaded   `ON'                   
                       data node.                                    
`WITH_READLINE'        Use bundled readline   `OFF'          5.5.7   
                       library                                       
`WITH_SSL'             Type of SSL support    `no'           5.5.7   
`WITH_UNIXODBC'        Enable unixODBC        `OFF'                  
                       support                                       
`WITH_ZLIB'            Type of zlib support   `system'       5.5.7   
`WITHOUT_xxx_STORAGE_ENGINE'Exclude storage        `'             5.5.7   
                       engine xxx from build                         
`WITHOUT_SERVER'       Do not build the       `OFF'                  
                       server                                        

The following sections provide more information about `CMake' options.

   * General Options

   * Installation Layout Options

   * Feature Options

   * Options for Compiling MySQL Cluster

   * Compiler Flags

For boolean options, the value may be specified as 1 or `ON' to enable
the option, or as 0 or `OFF' to disable the option.

Many options configure compile-time defaults that can be overridden at
server startup. For example, the `CMAKE_INSTALL_PREFIX',
`MYSQL_TCP_PORT', and `MYSQL_UNIX_ADDR' options that configure the
default installation base directory location, TCP/IP port number, and
Unix socket file can be changed at server startup with the `--basedir',
`--port', and `--socket' options for *Note `mysqld': mysqld. Where
applicable, configuration option descriptions indicate the
corresponding *Note `mysqld': mysqld.  startup option.

* General Options *

   *  `-DBUILD_CONFIG=mysql_release'

     This option configures a source distribution with the same build
     options used by Oracle to produce binary distributions for
     official MySQL releases.

   *  `-DCMAKE_BUILD_TYPE=TYPE'

     The type of build to produce:

        * `RelWithDebInfo': Enable optimizations and generate debugging
          information. This is the default MySQL build type.

        * `Debug': Disable optimizations and generate debugging
          information. This build type is also used if the `WITH_DEBUG'
          option is enabled. That is, `-DWITH_DEBUG=1' has the same
          effect as `-DCMAKE_BUILD_TYPE=Debug'.

   *  `-DCPACK_MONOLITHIC_INSTALL=BOOL'

     This option affects whether the `make package' operation produces
     multiple installation package files or a single file. If disabled,
     the operation produces multiple installation package files, which
     may be useful if you want to install only a subset of a full MySQL
     installation. If enabled, it produces a single file for installing
     everything.

* Installation Layout Options *

The `CMAKE_INSTALL_PREFIX' option indicates the base installation
directory. Other options with names of the form `INSTALL_XXX' that
indicate component locations are interpreted relative to the prefix and
their values are relative pathnames. Their values should not include
the prefix.

   *  `-DCMAKE_INSTALL_PREFIX=DIR_NAME'

     The installation base directory.

     This value can be set at server startup with the `--basedir'
     option.

   *  `-DINSTALL_BINDIR=DIR_NAME'

     Where to install user programs.

   *  `-DINSTALL_DOCDIR=DIR_NAME'

     Where to install documentation.

   *  `-DINSTALL_DOCREADMEDIR=DIR_NAME'

     Where to install `README' files.

   *  `-DINSTALL_INCLUDEDIR=DIR_NAME'

     Where to install header files.

   *  `-DINSTALL_INFODIR=DIR_NAME'

     Where to install Info files.

   *  `-DINSTALL_LAYOUT=NAME'

     Select a predefined installation layout:

        * `STANDALONE': Same layout as used for `.tar.gz' and `.zip'
          packages. This is the default.

        * `RPM': Layout similar to RPM packages.

        * `SVR4': Solaris package layout.

        * `DEB': DEB package layout (experimental).

     You can select a predefined layout but modify individual component
     installation locations by specifying other options.  For example:

          shell> cmake . -DINSTALL_LAYOUT=SVR4 -DMYSQL_DATADIR=/var/mysql/data

   *  `-DINSTALL_LIBDIR=DIR_NAME'

     Where to install library files.

   *  `-DINSTALL_MANDIR=DIR_NAME'

     Where to install manual pages.

   *  `-DINSTALL_MYSQLSHAREDIR=DIR_NAME'

     Where to install shared data files.

   *  `-DINSTALL_MYSQLTESTDIR=DIR_NAME'

     Where to install the `mysql-test' directory. As of MySQL 5.5.32,
     to suppress installation of this directory, explicitly set the
     option to the empty value (`-DINSTALL_MYSQLTESTDIR=').

   *  `-DINSTALL_PLUGINDIR=DIR_NAME'

     The location of the plugin directory.

     This value can be set at server startup with the `--plugin_dir'
     option.

   *  `-DINSTALL_SBINDIR=DIR_NAME'

     Where to install the *Note `mysqld': mysqld. server.

   *  `-DINSTALL_SCRIPTDIR=DIR_NAME'

     Where to install *Note `mysql_install_db': mysql-install-db.

   *  `-DINSTALL_SHAREDIR=DIR_NAME'

     Where to install `aclocal/mysql.m4'.

   *  `-DINSTALL_SQLBENCHDIR=DIR_NAME'

     Where to install the `sql-bench' directory.  To suppress
     installation of this directory, explicitly set the option to the
     empty value (`-DINSTALL_SQLBENCHDIR=').

   *  `-DINSTALL_SUPPORTFILESDIR=DIR_NAME'

     Where to install extra support files.

   *  `-DMYSQL_DATADIR=DIR_NAME'

     The location of the MySQL data directory.

     This value can be set at server startup with the `--datadir'
     option.

   *  `-DODBC_INCLUDES=DIR_NAME'

     The location of the ODBC includes directory, and may be used while
     configuring Connector/ODBC.

   *  `-DODBC_LIB_DIR=DIR_NAME'

     The location of the ODBC library directory, and may be used while
     configuring Connector/ODBC.

   *  `-DSYSCONFDIR=DIR_NAME'

     The default `my.cnf' option file directory.

     This location cannot be set at server startup, but you can start
     the server with a given option file using the
     `--defaults-file=FILE_NAME' option, where FILE_NAME is the full
     path name to the file.

   *  `-DWITH_UNIXODBC=1'

     Enables unixODBC support, for Connector/ODBC.

* Storage Engine Options *

Storage engines are built as plugins. You can build a plugin as a
static module (compiled into the server) or a dynamic module (built as
a dynamic library that must be installed into the server using the
*Note `INSTALL PLUGIN': install-plugin. statement or the
`--plugin-load' option before it can be used). Some plugins might not
support static or dynamic building.

The *Note `MyISAM': myisam-storage-engine, *Note `MERGE':
merge-storage-engine, *Note `MEMORY': memory-storage-engine, and *Note
`CSV': csv-storage-engine. engines are mandatory (always compiled into
the server) and need not be installed explicitly.

To compile a storage engine statically into the server, use
`-DWITH_ENGINE_STORAGE_ENGINE=1'.  Some permissible ENGINE values are
`ARCHIVE', `BLACKHOLE', `EXAMPLE', `FEDERATED', `INNOBASE' (*Note
`InnoDB': innodb-storage-engine.), `NDBCLUSTER' (*Note `NDB':
mysql-cluster.), `PARTITION' (partitioning support), and `PERFSCHEMA'
(Performance Schema). Examples:

     -DWITH_INNOBASE_STORAGE_ENGINE=1
     -DWITH_ARCHIVE_STORAGE_ENGINE=1
     -DWITH_BLACKHOLE_STORAGE_ENGINE=1
     -DWITH_PERFSCHEMA_STORAGE_ENGINE=1

*Note*:

`WITH_NDBCLUSTER_STORAGE_ENGINE' is supported only when building MySQL
Cluster using the MySQL Cluster sources. It cannot be used to enable
clustering support in other MySQL source trees or distributions. In
MySQL Cluster NDB 7.2 source distributions, it is enabled by default.
See *Note mysql-cluster-install-linux-source::, and *Note
mysql-cluster-install-windows-source::, for more information.

To exclude a storage engine from the build, use
`-DWITHOUT_ENGINE_STORAGE_ENGINE=1'.  Examples:

     -DWITHOUT_EXAMPLE_STORAGE_ENGINE=1
     -DWITHOUT_FEDERATED_STORAGE_ENGINE=1
     -DWITHOUT_PARTITION_STORAGE_ENGINE=1

If neither `-DWITH_ENGINE_STORAGE_ENGINE' nor
`-DWITHOUT_ENGINE_STORAGE_ENGINE' are specified for a given storage
engine, the engine is built as a shared module, or excluded if it
cannot be built as a shared module.

* Feature Options *

   *  `-DCOMPILATION_COMMENT=STRING'

     A descriptive comment about the compilation environment.

   *  `-DDEFAULT_CHARSET=CHARSET_NAME'

     The server character set. By default, MySQL uses the `latin1'
     (cp1252 West European) character set.

     CHARSET_NAME may be one of `binary', `armscii8', `ascii', `big5',
     `cp1250', `cp1251', `cp1256', `cp1257', `cp850', `cp852', `cp866',
     `cp932', `dec8', `eucjpms', `euckr', `gb2312', `gbk', `geostd8',
     `greek', `hebrew', `hp8', `keybcs2', `koi8r', `koi8u', `latin1',
     `latin2', `latin5', `latin7', `macce', `macroman', `sjis', `swe7',
     `tis620', `ucs2', `ujis', `utf8', `utf8mb4', `utf16', `utf32'. The
     permissible character sets are listed in the
     `cmake/character_sets.cmake' file as the value of
     `CHARSETS_AVAILABLE'.

     This value can be set at server startup with the
     `--character_set_server' option.

   *  `-DDEFAULT_COLLATION=COLLATION_NAME'

     The server collation. By default, MySQL uses `latin1_swedish_ci'.
     Use the *Note `SHOW COLLATION': show-collation. statement to
     determine which collations are available for each character set.

     This value can be set at server startup with the
     `--collation_server' option.

   *  `-DENABLE_DEBUG_SYNC=BOOL'

     Whether to compile the Debug Sync facility into the server.  This
     facility is used for testing and debugging. This option is enabled
     by default, but has no effect unless MySQL is configured with
     debugging enabled. If debugging is enabled and you want to disable
     Debug Sync, use `-DENABLE_DEBUG_SYNC=0'.

     When compiled in, Debug Sync is disabled by default at runtime. To
     enable it, start *Note `mysqld': mysqld. with the
     `--debug-sync-timeout=N' option, where N is a timeout value
     greater than 0. (The default value is 0, which disables Debug
     Sync.) N becomes the default timeout for individual
     synchronization points.

     For a description of the Debug Sync facility and how to use
     synchronization points, see MySQL Internals: Test Synchronization
     (http://dev.mysql.com/doc/internals/en/test-synchronization.html).

   *  `-DENABLE_DOWNLOADS=BOOL'

     Whether to download optional files. For example, with this option
     enabled, `CMake' downloads the Google Test distribution that is
     used by the test suite to run unit tests.

   *  `-DENABLE_DTRACE=BOOL'

     Whether to include support for DTrace probes. For information
     about DTrace, wee *Note dba-dtrace-server::

   *  `-DENABLE_GCOV=BOOL'

     Whether to include gcov support (Linux only).

   *  `-DENABLED_LOCAL_INFILE=BOOL'

     Whether to enable `LOCAL' capability in the client library for
     *Note `LOAD DATA INFILE': load-data.

     This option controls client-side `LOCAL' capability, but the
     capability can be set on the server side at server startup with the
     `--local-infile' option. See *Note load-data-local::.

   *  `-DENABLED_PROFILING=BOOL'

     Whether to enable query profiling code (for the *Note `SHOW
     PROFILE': show-profile. and *Note `SHOW PROFILES': show-profiles.
     statements).

   *  `-DIGNORE_AIO_CHECK=BOOL'

     If the `-DBUILD_CONFIG=mysql_release' option is given on Linux,
     the `libaio' library must be linked in by default. If you do not
     have `libaio' or do not want to install it, you can suppress the
     check for it by specifying `-DIGNORE_AIO_CHECK=1'. This option was
     added in MySQL 5.5.9.

   *  `-DMYSQL_MAINTAINER_MODE=BOOL'

     Whether to enable a MySQL maintainer-specific development
     environment. If enabled, this option causes compiler warnings to
     become errors.

   *  `-DMYSQL_PROJECT_NAME=NAME'

     For Windows or Mac OS X, the project name to incorporate into the
     project file name. This option was added in MySQL 5.5.21.

   *  `-DMYSQL_TCP_PORT=PORT_NUM'

     The port number on on which the server listens for TCP/IP
     connections. The default is 3306.

     This value can be set at server startup with the `--port' option.

   *  `-DMYSQL_UNIX_ADDR=FILE_NAME'

     The Unix socket file path on which the server listens for socket
     connections. This must be an absolute path name. The default is
     `/tmp/mysql.sock'.

     This value can be set at server startup with the `--socket' option.

   *  `-DWITH_DEBUG=BOOL'

     Whether to include debugging support.

     Configuring MySQL with debugging support enables you to use the
     `--debug="d,parser_debug"' option when you start the server. This
     causes the Bison parser that is used to process SQL statements to
     dump a parser trace to the server's standard error output.
     Typically, this output is written to the error log.

   *  `-DWITH_EMBEDDED_SERVER=BOOL'

     Whether to build the `libmysqld' embedded server library.

   *  `-DWITH_EXTRA_CHARSETS=NAME'

     Which extra character sets to include:

        * `all': All character sets. This is the default.

        * `complex': Complex character sets.

        * `none': No extra character sets.

   *  `-DWITH_LIBEDIT=BOOL'

     Whether to use the `libedit' library bundled with the distribution.

   *  `-DWITH_LIBWRAP=BOOL'

     Whether to include `libwrap' (TCP wrappers) support.

   *  `-DWITH_READLINE=BOOL'

     Whether to use the `readline' library bundled with the
     distribution.

   *  `-DWITH_SSL=SSL_TYPE'

     The type of SSL support to include, if any:

        * `no': No SSL support. This is the default.

        * `yes': Use the system SSL library if present, else the
          library bundled with the distribution.

        * `bundled': Use the SSL library bundled with the distribution.

        * `system': Use the system SSL library.

     For information about using SSL support, see *Note
     ssl-connections::.

   *  `-DWITH_ZLIB=ZLIB_TYPE'

     Some features require that the server be built with compression
     library support, such as the `COMPRESS()' and `UNCOMPRESS()'
     functions, and compression of the client/server protocol. The
     `WITH_ZLIB' indicates the source of `zlib' support:

        * `bundled': Use the `zlib' library bundled with the
          distribution.

        * `system': Use the system `zlib' library. This is the default.

   *  `-DWITHOUT_SERVER=BOOL'

     Whether to build without the MySQL server. The default is `OFF',
     which does build the server.

* Compiler Flags *

To specify compiler flags, set the `CFLAGS' and `CXXFLAGS' environment
variables before running `CMake'. Example:

     shell> CFLAGS=-DHAVE_EMBEDDED_PRIVILEGE_CONTROL
     shell> CXXFLAGS=-DHAVE_EMBEDDED_PRIVILEGE_CONTROL
     shell> export CFLAGS CXXFLAGS
     shell> cmake [OPTIONS]

The following flags control configuration features:

   *  `HAVE_EMBEDDED_PRIVILEGE_CONTROL'

     By default, authentication for connections to the embedded server
     is disabled. To enable connection authentication, define this flag.

* `CMake' Options for Compiling MySQL Cluster *

The following options are for use when building MySQL Cluster NDB 7.2
or later. These options are supported only with the MySQL Cluster NDB
7.2 and later MySQL Cluster sources; they are not supported when using
sources from the MySQL 5.5 Server tree.

   *  `-DMEMCACHED_HOME=PATH'

     Perform the build using the memcached (version 1.6 or later)
     installed in the system directory indicated by PATH. Files from
     this installation that are used in the build include the memcached
     binary, header files, and libraries, as well as the
     `memcached_utilities' library and the header file
     `engine_testapp.h'.

     You must leave this option unset when building `ndbmemcache' using
     the bundled memcached sources (`WITH_BUNDLED_MEMCACHED' option);
     in other words, the bundled sources are used by default).

     This option was added in MySQL Cluster NDB 7.2.2.

     While additional `CMake' options--such as for SASL authorization
     and for providing `dtrace' support--are available for use when
     compiling `memcached' from external sources, these options are
     currently not enabled for the `memcached' sources bundled with
     MySQL Cluster.

   *  `-DWITH_BUNDLED_LIBEVENT={ON|OFF}'

     Use the `libevent' included in the MySQL Cluster sources when
     building MySQL Cluster with ndbmemcached support (MySQL Cluster
     NDB 7.2.2 and later). Enabled by default. OFF causes the system's
     libevent to be used instead.

   *  `-DWITH_BUNDLED_MEMCACHED={ON|OFF}'

     Build the memcached sources included in the MySQL Cluster source
     tree (MySQL Cluster NDB 7.2.3 and later), then use the resulting
     memcached server when building the ndbmemcache engine. In this
     case, `make install' places the `memcached' binary in the
     installation `bin' directory, and the ndbmemcache engine shared
     object file `ndb_engine.so' in the installation `lib' directory.

     This option is ON by default.

   *  `-DWITH_CLASSPATH=PATH'

     Sets the classpath for building MySQL Cluster Connector for Java.
     Default is empty. In MySQL Cluster NDB 7.2.9 and later, this
     option is ignored if `-DWITH_NDB_JAVA=OFF' is used.

   *  `-DWITH_ERROR_INSERT={ON|OFF}'

     Enables error injection in the *Note `NDB': mysql-cluster. kernel.
     For testing only; not intended for use in building production
     binaries. Default is OFF.

   *  `-DWITH_NDBCLUSTER_STORAGE_ENGINE={ON|OFF}'

     Build and link in support for the *Note `NDB': mysql-cluster.
     (*Note `NDBCLUSTER': mysql-cluster.) storage engine in *Note
     `mysqld': mysqld. Default is ON.

   *  `-DWITH_NDBCLUSTER={ON|OFF}'

     This is an alias for `WITH_NDBCLUSTER_STORAGE_ENGINE'.

   *  `-DWITH_NDBMTD={ON|OFF}'

     Build the multi-threaded data node executable *Note `ndbmtd':
     mysql-cluster-programs-ndbmtd. Default is ON.

   *  `-DWITH_NDB_BINLOG={ON|OFF}'

     Enable binary logging by default in the *Note `mysqld': mysqld.
     built using this option. ON by default.

   *  `-DWITH_NDB_DEBUG={ON|OFF}'

     Enable building the debug versions of the MySQL Cluster binaries.
     OFF by default.

   *  `-DWITH_NDB_JAVA={ON|OFF}'

     Enable building MySQL Cluster with Java support, including
     `ClusterJ'.

     This option was added in MySQL Cluster NDB 7.2.9, and is ON by
     default. If you do not wish to compile MySQL Cluster with Java
     support, you must disable it explicitly by specifying
     `-DWITH_NDB_JAVA=OFF' when running `CMake'. Otherwise, if Java
     cannot be found, configuration of the build fails.

   *  `-DWITH_NDB_PORT=PORT'

     Causes the MySQL Cluster management server (*Note `ndb_mgmd':
     mysql-cluster-programs-ndb-mgmd.) that is built to use this PORT
     by default. If this option is unset, the resulting management
     server tries to use port 1186 by default.

   *  `-DWITH_NDB_TEST={ON|OFF}'

     If enabled, include a set of NDB API test programs. The default is
     OFF.


File: manual.info,  Node: compilation-problems,  Next: source-configuration-third-party,  Prev: source-configuration-options,  Up: source-installation

2.10.5 Dealing with Problems Compiling MySQL
--------------------------------------------

The solution to many problems involves reconfiguring. If you do
reconfigure, take note of the following:

   * If `CMake' is run after it has previously been run, it may use
     information that was gathered during its previous invocation. This
     information is stored in `CMakeCache.txt'. When `CMake' starts up,
     it looks for that file and reads its contents if it exists, on the
     assumption that the information is still correct. That assumption
     is invalid when you reconfigure.

   * Each time you run `CMake', you must run `make' again to recompile.
     However, you may want to remove old object files from previous
     builds first because they were compiled using different
     configuration options.

To prevent old object files or configuration information from being
used, run these commands on Unix before re-running `CMake':

     shell> make clean
     shell> rm CMakeCache.txt

Or, on Windows:

     shell> devenv MySQL.sln /clean
     shell> del CMakeCache.txt

If you build out of the source tree, remove and recreate your build
directory before re-running `CMake'. For instructions on building
outside of the source tree, see How to Build MySQL Server with CMake
(http://dev.mysql.com/doc/internals/en/cmake.html).

On some systems, warnings may occur due to differences in system
include files. The following list describes other problems that have
been found to occur most often when compiling MySQL:

   * To define flags to be used by your C or C++ compilers, specify
     them using the `CFLAGS' and `CXXFLAGS' environment variables. You
     can also specify the compiler names this way using `CC' and `CXX'.
     For example:

          shell> CC=gcc
          shell> CFLAGS=-O3
          shell> CXX=gcc
          shell> CXXFLAGS=-O3
          shell> export CC CFLAGS CXX CXXFLAGS

     To see what flags you might need to specify, invoke *Note
     `mysql_config': mysql-config. with the `--cflags' option.

   * If compilation fails, check whether the `MYSQL_MAINTAINER_MODE'
     option is enabled. This mode causes compiler warnings to become
     errors, so disabling it may enable compilation to proceed.

   * If your compile fails with errors such as any of the following,
     you must upgrade your version of `make' to GNU `make':

          make: Fatal error in reader: Makefile, line 18:
          Badly formed macro assignment

     Or:

          make: file `Makefile' line 18: Must be a separator (:

     Or:

          pthread.h: No such file or directory

     Solaris and FreeBSD are known to have troublesome `make' programs.

     GNU `make' 3.75 is known to work.

   * The `sql_yacc.cc' file is generated from `sql_yacc.yy'. Normally,
     the build process does not need to create `sql_yacc.cc' because
     MySQL comes with a pregenerated copy. However, if you do need to
     re-create it, you might encounter this error:

          "sql_yacc.yy", line XXX fatal: default action causes potential...

     This is a sign that your version of `yacc' is deficient. You
     probably need to install `bison' (the GNU version of `yacc') and
     use that instead.

     Versions of `bison' older than 1.75 may report this error:

          sql_yacc.yy:#####: fatal error: maximum table size (32767) exceeded

     The maximum table size is not actually exceeded; the error is
     caused by bugs in older versions of `bison'.

For information about acquiring or updating tools, see the system
requirements in *Note source-installation::.


File: manual.info,  Node: source-configuration-third-party,  Prev: compilation-problems,  Up: source-installation

2.10.6 MySQL Configuration and Third-Party Tools
------------------------------------------------

Third-party tools that need to determine the MySQL version from the
MySQL source can read the `VERSION' file in the top-level source
directory. The file lists the pieces of the version separately. For
example, if the version is 5.5.8, the file looks like this:

     MYSQL_VERSION_MAJOR=5
     MYSQL_VERSION_MINOR=5
     MYSQL_VERSION_PATCH=8
     MYSQL_VERSION_EXTRA=

If the source is not for a General Availability (GA) release, the
`MYSQL_VERSION_EXTRA' value will be nonempty. For example, the value
for a Release Candidate release would look like this:

     MYSQL_VERSION_EXTRA=rc

To construct a five-digit number from the version components, use this
formula:

     MYSQL_VERSION_MAJOR*10000 + MYSQL_VERSION_MINOR*100 + MYSQL_VERSION_PATCH


File: manual.info,  Node: postinstallation,  Next: upgrading-downgrading,  Prev: source-installation,  Up: installing

2.11 Postinstallation Setup and Testing
=======================================

* Menu:

* unix-postinstallation::        Unix Postinstallation Procedures
* default-privileges::           Securing the Initial MySQL Accounts

This section discusses post-installation items for Unix systems. If you
are using Windows, see *Note windows-postinstallation::.

After installing MySQL, there are some items that you should address.
For example:

   * You should initialize the data directory and create the MySQL
     grant tables, as describe in *Note unix-postinstallation::.

   * An important security concern is that the initial accounts in the
     grant tables have no passwords. You should assign passwords to
     prevent unauthorized access to the MySQL server. For instructions,
     see *Note default-privileges::.

   * Optionally, you can create time zone tables to enable recognition
     of named time zones. For instructions, see *Note
     mysql-tzinfo-to-sql::.

   * If you have trouble getting the server to start, see *Note
     starting-server::.

   * When you are ready to create additional user accounts, you can
     find information on the MySQL access control system and account
     management in *Note privilege-system::, and *Note
     user-account-management::.


File: manual.info,  Node: unix-postinstallation,  Next: default-privileges,  Prev: postinstallation,  Up: postinstallation

2.11.1 Unix Postinstallation Procedures
---------------------------------------

* Menu:

* mysql-install-db-problems::    Problems Running `mysql_install_db'
* automatic-start::              Starting and Stopping MySQL Automatically
* starting-server::              Starting and Troubleshooting the MySQL Server

After installing MySQL on Unix, you must initialize the grant tables,
start the server, and make sure that the server works satisfactorily.
You may also wish to arrange for the server to be started and stopped
automatically when your system starts and stops. You should also assign
passwords to the accounts in the grant tables.

On Unix, the grant tables are set up by the *Note `mysql_install_db':
mysql-install-db. program. For some installation methods, this program
is run for you automatically if an existing database cannot be found.

   * If you install MySQL on Linux using RPM distributions, the server
     RPM runs *Note `mysql_install_db': mysql-install-db.

   * Using the native packaging system on many platforms, including
     Debian Linux, Ubuntu Linux, Gentoo Linux and others, the *Note
     `mysql_install_db': mysql-install-db. command is run for you.

   * If you install MySQL on Mac OS X using a DMG distribution, the
     installer runs *Note `mysql_install_db': mysql-install-db.

For other platforms and installation types, including generic binary
and source installs, you will need to run *Note `mysql_install_db':
mysql-install-db. yourself.

The following procedure describes how to initialize the grant tables
(if that has not previously been done) and start the server. It also
suggests some commands that you can use to test whether the server is
accessible and working properly. For information about starting and
stopping the server automatically, see *Note automatic-start::.

After you complete the procedure and have the server running, you
should assign passwords to the accounts created by *Note
`mysql_install_db': mysql-install-db. and perhaps restrict access to
test databases. For instructions, see *Note default-privileges::.

In the examples shown here, the server runs under the user ID of the
`mysql' login account. This assumes that such an account exists. Either
create the account if it does not exist, or substitute the name of a
different existing login account that you plan to use for running the
server. For information about creating the account, see Creating a
`mysql' System User and Group, in *Note binary-installation::.

  1. Change location into the top-level directory of your MySQL
     installation, represented here by BASEDIR:

          shell> cd BASEDIR

     BASEDIR is the installation directory for your MySQL instance. It
     is likely to be something like `/usr/local/mysql' or `/usr/local'.
     The following steps assume that you have changed location to this
     directory.

     You will find several files and subdirectories in the BASEDIR
     directory. The most important for installation purposes are the
     `bin' and `scripts' subdirectories:

        * The `bin' directory contains client programs and the server.
          You should add the full path name of this directory to your
          `PATH' environment variable so that your shell finds the MySQL
          programs properly. See *Note environment-variables::.

        * The `scripts' directory contains the *Note
          `mysql_install_db': mysql-install-db. script used to
          initialize the `mysql' database containing the grant tables
          that store the server access permissions.

  2. If necessary, ensure that the distribution contents are accessible
     to `mysql'. If you installed the distribution as `mysql', no
     further action is required. If you installed the distribution as
     `root', its contents will be owned by `root'. Change its ownership
     to `mysql' by executing the following commands as `root' in the
     installation directory. The first command changes the owner
     attribute of the files to the `mysql' user. The second changes the
     group attribute to the `mysql' group.

          shell> chown -R mysql .
          shell> chgrp -R mysql .

  3. If necessary, run the *Note `mysql_install_db': mysql-install-db.
     program to set up the initial MySQL grant tables containing the
     privileges that determine how users are permitted to connect to
     the server. You will need to do this if you used a distribution
     type for which the installation procedure does not run the program
     for you.

          shell> scripts/mysql_install_db --user=mysql

     Typically, *Note `mysql_install_db': mysql-install-db. needs to be
     run only the first time you install MySQL, so you can skip this
     step if you are upgrading an existing installation, However, *Note
     `mysql_install_db': mysql-install-db. does not overwrite any
     existing privilege tables, so it should be safe to run in any
     circumstances.

     It might be necessary to specify other options such as `--basedir'
     or `--datadir' if *Note `mysql_install_db': mysql-install-db. does
     not identify the correct locations for the installation directory
     or data directory. For example:

          shell> scripts/mysql_install_db --user=mysql \
                   --basedir=/opt/mysql/mysql \
                   --datadir=/opt/mysql/mysql/data

     The *Note `mysql_install_db': mysql-install-db. script creates the
     server's data directory with `mysql' as the owner. Under the data
     directory, it creates directories for the `mysql' database that
     holds the grant tables and the `test' database that you can use to
     test MySQL. The script also creates privilege table entries for
     `root' and anonymous-user accounts. The accounts have no passwords
     initially.  *Note default-privileges::, describes the initial
     privileges. Briefly, these privileges permit the MySQL `root' user
     to do anything, and permit anybody to create or use databases with
     a name of `test' or starting with `test_'. See *Note
     privilege-system::, for a complete listing and description of the
     grant tables.

     It is important to make sure that the database directories and
     files are owned by the `mysql' login account so that the server
     has read and write access to them when you run it later. To ensure
     this if you run *Note `mysql_install_db': mysql-install-db. as
     `root', include the `--user' option as shown. Otherwise, you
     should execute the script while logged in as `mysql', in which
     case you can omit the `--user' option from the command.

     If you do not want to have the `test' database, you can remove it
     after starting the server, using the instructions in *Note
     default-privileges::.

     If you have trouble with *Note `mysql_install_db':
     mysql-install-db.  at this point, see *Note
     mysql-install-db-problems::.

  4. Most of the MySQL installation can be owned by `root' if you like.
     The exception is that the data directory must be owned by `mysql'.
     To accomplish this, run the following commands as `root' in the
     installation directory:

          shell> chown -R root .
          shell> chown -R mysql data

  5. If the plugin directory (the directory named by the `plugin_dir'
     system variable) is writable by the server, it may be possible for
     a user to write executable code to a file in the directory using
     *Note `SELECT ... INTO DUMPFILE': select-into. This can be
     prevented by making `plugin_dir' read only to the server or by
     setting `--secure-file-priv' to a directory where *Note `SELECT':
     select. writes can be made safely.

  6. If you installed MySQL using a source distribution, you may want
     to optionally copy one of the provided configuration files from
     the `support-files' directory into your `/etc' directory. There are
     different sample configuration files for different use cases,
     server types, and CPU and RAM configurations. If you want to use
     one of these standard files, you should copy it to `/etc/my.cnf',
     or `/etc/mysql/my.cnf' and edit and check the configuration before
     starting your MySQL server for the first time.

     If you do not copy one of the standard configuration files, the
     MySQL server will be started with the default settings.

     If you want MySQL to start automatically when you boot your
     machine, you can copy `support-files/mysql.server' to the location
     where your system has its startup files. More information can be
     found in the `mysql.server' script itself, and in *Note
     automatic-start::.

  7. Start the MySQL server:

          shell> bin/mysqld_safe --user=mysql &

     It is important that the MySQL server be run using an unprivileged
     (non-`root') login account. To ensure this if you run *Note
     `mysqld_safe': mysqld-safe. as `root', include the `--user' option
     as shown.  Otherwise, you should execute the script while logged
     in as `mysql', in which case you can omit the `--user' option from
     the command.

     For further instructions for running MySQL as an unprivileged
     user, see *Note changing-mysql-user::.

     If the command fails immediately and prints `mysqld ended', look
     for information in the error log (which by default is the
     `HOST_NAME.err' file in the data directory).

     If you neglected to create the grant tables by running *Note
     `mysql_install_db': mysql-install-db. before proceeding to this
     step, the following message appears in the error log file when you
     start the server:

          mysqld: Can't find file: 'host.frm'

     This error also occurs if you run *Note `mysql_install_db':
     mysql-install-db. as `root' without the `--user' option. Remove
     the `data' directory and run *Note `mysql_install_db':
     mysql-install-db. with the `--user' option as described previously.

     If you have other problems starting the server, see *Note
     starting-server::. For more information about *Note `mysqld_safe':
     mysqld-safe, see *Note mysqld-safe::.

  8. Use *Note `mysqladmin': mysqladmin. to verify that the server is
     running. The following commands provide simple tests to check
     whether the server is up and responding to connections:

          shell> bin/mysqladmin version
          shell> bin/mysqladmin variables

     The output from *Note `mysqladmin version': mysqladmin. varies
     slightly depending on your platform and version of MySQL, but
     should be similar to that shown here:

          shell> bin/mysqladmin version
          mysqladmin  Ver 14.12 Distrib 5.5.35, for pc-linux-gnu on i686
          ...

          Server version          5.5.35
          Protocol version        10
          Connection              Localhost via UNIX socket
          UNIX socket             /var/lib/mysql/mysql.sock
          Uptime:                 14 days 5 hours 5 min 21 sec

          Threads: 1  Questions: 366  Slow queries: 0
          Opens: 0  Flush tables: 1  Open tables: 19
          Queries per second avg: 0.000

     To see what else you can do with *Note `mysqladmin': mysqladmin,
     invoke it with the `--help' option.

  9. Verify that you can shut down the server:

          shell> bin/mysqladmin -u root shutdown

 10. Verify that you can start the server again. Do this by using *Note
     `mysqld_safe': mysqld-safe. or by invoking *Note `mysqld': mysqld.
     directly. For example:

          shell> bin/mysqld_safe --user=mysql &

     If *Note `mysqld_safe': mysqld-safe. fails, see *Note
     starting-server::.

 11. Run some simple tests to verify that you can retrieve information
     from the server. The output should be similar to what is shown
     here:

          shell> bin/mysqlshow
          +--------------------+
          |     Databases      |
          +--------------------+
          | information_schema |
          | mysql              |
          | test               |
          +--------------------+

          shell> bin/mysqlshow mysql
          Database: mysql
          +---------------------------+
          |          Tables           |
          +---------------------------+
          | columns_priv              |
          | db                        |
          | event                     |
          | func                      |
          | help_category             |
          | help_keyword              |
          | help_relation             |
          | help_topic                |
          | host                      |
          | plugin                    |
          | proc                      |
          | procs_priv                |
          | servers                   |
          | tables_priv               |
          | time_zone                 |
          | time_zone_leap_second     |
          | time_zone_name            |
          | time_zone_transition      |
          | time_zone_transition_type |
          | user                      |
          +---------------------------+

          shell> bin/mysql -e "SELECT Host,Db,User FROM db" mysql
          +------+--------+------+
          | host | db     | user |
          +------+--------+------+
          | %    | test   |      |
          | %    | test_% |      |
          +------+--------+------+

 12. There is a benchmark suite in the `sql-bench' directory (under the
     MySQL installation directory) that you can use to compare how MySQL
     performs on different platforms. The benchmark suite is written in
     Perl. It requires the Perl DBI module that provides a
     database-independent interface to the various databases, and some
     other additional Perl modules:

          DBI
          DBD::mysql
          Data::Dumper
          Data::ShowTable

     These modules can be obtained from CPAN (`http://www.cpan.org/').
     See also *Note perl-installation::.

     The `sql-bench/Results' directory contains the results from many
     runs against different databases and platforms. To run all tests,
     execute these commands:

          shell> cd sql-bench
          shell> perl run-all-tests

     If you do not have the `sql-bench' directory, you probably
     installed MySQL using RPM files other than the source RPM. (The
     source RPM includes the `sql-bench' benchmark directory.) In this
     case, you must first install the benchmark suite before you can
     use it. There are separate benchmark RPM files named
     `mysql-bench-VERSION.i386.rpm' that contain benchmark code and
     data.

     If you have a source distribution, there are also tests in its
     `tests' subdirectory that you can run. For example, to run
     `auto_increment.tst', execute this command from the top-level
     directory of your source distribution:

          shell> mysql -vvf test < ./tests/auto_increment.tst

     The expected result of the test can be found in the
     `./tests/auto_increment.res' file.

 13. At this point, you should have the server running. However, none
     of the initial MySQL accounts have a password, and the server
     permits permissive access to test databases. To tighten security,
     follow the instructions in *Note default-privileges::.

The MySQL 5.5 installation procedure creates time zone tables in the
`mysql' database but does not populate them. To do so, use the
instructions in *Note time-zone-support::.

To make it more convenient to invoke programs installed in the `bin'
directory under the installation directory, you can add that directory
to your `PATH' environment variable setting. That enables you to run a
program by typing only its name, not its entire path name. See *Note
setting-environment-variables::.

You can set up new accounts using the `bin/mysql_setpermission' script
if you install the `DBI' and `DBD::mysql' Perl modules. See *Note
mysql-setpermission::. For Perl module installation instructions, see
*Note perl-support::.

If you would like to use *Note `mysqlaccess': mysqlaccess. and have the
MySQL distribution in some nonstandard location, you must change the
location where *Note `mysqlaccess': mysqlaccess. expects to find the
*Note `mysql': mysql. client. Edit the `bin/mysqlaccess' script at
approximately line 18. Search for a line that looks like this:

     $MYSQL     = '/usr/local/bin/mysql';    # path to mysql executable

Change the path to reflect the location where *Note `mysql': mysql.
actually is stored on your system. If you do not do this, a `Broken
pipe' error will occur when you run *Note `mysqlaccess': mysqlaccess.


File: manual.info,  Node: mysql-install-db-problems,  Next: automatic-start,  Prev: unix-postinstallation,  Up: unix-postinstallation

2.11.1.1 Problems Running `mysql_install_db'
............................................

The purpose of the *Note `mysql_install_db': mysql-install-db. script is
to generate new MySQL privilege tables. It does not overwrite existing
MySQL privilege tables, and it does not affect any other data.

If you want to re-create your privilege tables, first stop the *Note
`mysqld': mysqld. server if it is running. Then rename the `mysql'
directory under the data directory to save it, and then run *Note
`mysql_install_db': mysql-install-db. Suppose that your current
directory is the MySQL installation directory and that *Note
`mysql_install_db': mysql-install-db. is located in the `bin' directory
and the data directory is named `data'. To rename the `mysql' database
and re-run *Note `mysql_install_db': mysql-install-db, use these
commands.

     shell> mv data/mysql data/mysql.old
     shell> scripts/mysql_install_db --user=mysql

When you run *Note `mysql_install_db': mysql-install-db, you might
encounter the following problems:

   * **Note `mysql_install_db': mysql-install-db.  fails to install the
     grant tables*

     You may find that *Note `mysql_install_db': mysql-install-db. fails
     to install the grant tables and terminates after displaying the
     following messages:

          Starting mysqld daemon with databases from XXXXXX
          mysqld ended

     In this case, you should examine the error log file very
     carefully. The log should be located in the directory `XXXXXX'
     named by the error message and should indicate why *Note `mysqld':
     mysqld. did not start.  If you do not understand what happened,
     include the log when you post a bug report. See *Note
     bug-reports::.

   * *There is a *Note `mysqld': mysqld.  process running*

     This indicates that the server is running, in which case the grant
     tables have probably been created already. If so, there is no need
     to run *Note `mysql_install_db': mysql-install-db.  at all because
     it needs to be run only once (when you install MySQL the first
     time).

   * *Installing a second *Note `mysqld': mysqld. server does not work
     when one server is running*

     This can happen when you have an existing MySQL installation, but
     want to put a new installation in a different location. For
     example, you might have a production installation, but you want to
     create a second installation for testing purposes. Generally the
     problem that occurs when you try to run a second server is that it
     tries to use a network interface that is in use by the first
     server. In this case, you should see one of the following error
     messages:

          Can't start server: Bind on TCP/IP port:
          Address already in use
          Can't start server: Bind on unix socket...

     For instructions on setting up multiple servers, see *Note
     multiple-servers::.

   * *You do not have write access to the `/tmp' directory*

     If you do not have write access to create temporary files or a
     Unix socket file in the default location (the `/tmp' directory) or
     the `TMP_DIR' environment variable, if it has been set, an error
     occurs when you run *Note `mysql_install_db': mysql-install-db. or
     the *Note `mysqld': mysqld. server.

     You can specify different locations for the temporary directory
     and Unix socket file by executing these commands prior to starting
     *Note `mysql_install_db': mysql-install-db. or *Note `mysqld':
     mysqld, where SOME_TMP_DIR is the full path name to some directory
     for which you have write permission:

          shell> TMPDIR=/SOME_TMP_DIR/
          shell> MYSQL_UNIX_PORT=/SOME_TMP_DIR/mysql.sock
          shell> export TMPDIR MYSQL_UNIX_PORT

     Then you should be able to run *Note `mysql_install_db':
     mysql-install-db. and start the server with these commands:

          shell> scripts/mysql_install_db --user=mysql
          shell> bin/mysqld_safe --user=mysql &

     If *Note `mysql_install_db': mysql-install-db. is located in the
     `scripts' directory, modify the first command to
     `scripts/mysql_install_db'.

     See *Note problems-with-mysql-sock::, and *Note
     environment-variables::.

There are some alternatives to running the *Note `mysql_install_db':
mysql-install-db. script provided in the MySQL distribution:

   * If you want the initial privileges to be different from the
     standard defaults, you can modify *Note `mysql_install_db':
     mysql-install-db. before you run it.  However, it is preferable to
     use *Note `GRANT': grant. and *Note `REVOKE': revoke. to change the
     privileges _after_ the grant tables have been set up. In other
     words, you can run *Note `mysql_install_db': mysql-install-db, and
     then use `mysql -u root mysql' to connect to the server as the
     MySQL `root' user so that you can issue the necessary *Note
     `GRANT': grant.  and *Note `REVOKE': revoke. statements.

     If you want to install MySQL on several machines with the same
     privileges, you can put the *Note `GRANT': grant. and *Note
     `REVOKE': revoke. statements in a file and execute the file as a
     script using `mysql' after running *Note `mysql_install_db':
     mysql-install-db. For example:

          shell> scripts/mysql_install_db --user=mysql
          shell> bin/mysql -u root < your_script_file

     By doing this, you can avoid having to issue the statements
     manually on each machine.

   * It is possible to re-create the grant tables completely after they
     have previously been created. You might want to do this if you are
     just learning how to use *Note `GRANT': grant. and *Note `REVOKE':
     revoke. and have made so many modifications after running *Note
     `mysql_install_db': mysql-install-db. that you want to wipe out
     the tables and start over.

     To re-create the grant tables, remove all the `.frm', `.MYI', and
     `.MYD' files in the `mysql' database directory. Then run the *Note
     `mysql_install_db': mysql-install-db. script again.

   * You can start *Note `mysqld': mysqld. manually using the
     `--skip-grant-tables' option and add the privilege information
     yourself using *Note `mysql': mysql.:

          shell> bin/mysqld_safe --user=mysql --skip-grant-tables &
          shell> bin/mysql mysql

     From *Note `mysql': mysql, manually execute the SQL commands
     contained in *Note `mysql_install_db': mysql-install-db.  Make
     sure that you run *Note `mysqladmin flush-privileges': mysqladmin.
     or *Note `mysqladmin reload': mysqladmin. afterward to tell the
     server to reload the grant tables.

     Note that by not using *Note `mysql_install_db': mysql-install-db,
     you not only have to populate the grant tables manually, you also
     have to create them first.


File: manual.info,  Node: automatic-start,  Next: starting-server,  Prev: mysql-install-db-problems,  Up: unix-postinstallation

2.11.1.2 Starting and Stopping MySQL Automatically
..................................................

Generally, you start the *Note `mysqld': mysqld. server in one of these
ways:

   * Invoke *Note `mysqld': mysqld. directly. This works on any
     platform.

   * Invoke *Note `mysqld_safe': mysqld-safe, which tries to determine
     the proper options for *Note `mysqld': mysqld.  and then runs it
     with those options. This script is used on Unix and Unix-like
     systems. See *Note mysqld-safe::.

   * Invoke *Note `mysql.server': mysql-server. This script is used
     primarily at system startup and shutdown on systems that use
     System V-style run directories (that is, `/etc/init.d' and
     run-level specific directories), where it usually is installed
     under the name `mysql'. The *Note `mysql.server': mysql-server.
     script starts the server by invoking *Note `mysqld_safe':
     mysqld-safe. See *Note mysql-server::.

   * On Mac OS X, install a separate MySQL Startup Item package to
     enable the automatic startup of MySQL on system startup.  The
     Startup Item starts the server by invoking *Note `mysql.server':
     mysql-server. See *Note macosx-installation-startupitem::, for
     details. A MySQL Preference Pane also provides control for
     starting and stopping MySQL through the System Preferences, see
     *Note macosx-installation-prefpane::.

   * Use the Solaris/OpenSolaris service management framework (SMF)
     system to initiate and control MySQL startup. For more
     information, see *Note solaris-installation-opensolaris::.

The *Note `mysqld_safe': mysqld-safe. and *Note `mysql.server':
mysql-server. scripts, Solaris/OpenSolaris SMF, and the Mac OS X
Startup Item (or MySQL Preference Pane) can be used to start the server
manually, or automatically at system startup time. *Note
`mysql.server': mysql-server. and the Startup Item also can be used to
stop the server.

To start or stop the server manually using the *Note `mysql.server':
mysql-server. script, invoke it with `start' or `stop' arguments:

     shell> mysql.server start
     shell> mysql.server stop

Before *Note `mysql.server': mysql-server. starts the server, it
changes location to the MySQL installation directory, and then invokes
*Note `mysqld_safe': mysqld-safe. If you want the server to run as some
specific user, add an appropriate `user' option to the `[mysqld]' group
of the `/etc/my.cnf' option file, as shown later in this section. (It
is possible that you will need to edit *Note `mysql.server':
mysql-server. if you've installed a binary distribution of MySQL in a
nonstandard location. Modify it to change location into the proper
directory before it runs *Note `mysqld_safe': mysqld-safe. If you do
this, your modified version of *Note `mysql.server': mysql-server. may
be overwritten if you upgrade MySQL in the future, so you should make a
copy of your edited version that you can reinstall.)

*Note `mysql.server stop': mysql-server. stops the server by sending a
signal to it. You can also stop the server manually by executing *Note
`mysqladmin shutdown': mysqladmin.

To start and stop MySQL automatically on your server, you need to add
start and stop commands to the appropriate places in your `/etc/rc*'
files.

If you use the Linux server RPM package (`MySQL-server-VERSION.rpm'),
or a native Linux package installation, the *Note `mysql.server':
mysql-server. script may be installed in the `/etc/init.d' directory
with the name `mysql'. See *Note linux-installation-rpm::, for more
information on the Linux RPM packages.

Some vendors provide RPM packages that install a startup script under a
different name such as *Note `mysqld': mysqld.

If you install MySQL from a source distribution or using a binary
distribution format that does not install *Note `mysql.server':
mysql-server. automatically, you can install it manually. The script
can be found in the `support-files' directory under the MySQL
installation directory or in a MySQL source tree.

To install *Note `mysql.server': mysql-server. manually, copy it to the
`/etc/init.d' directory with the name *Note `mysql': mysql, and then
make it executable. Do this by changing location into the appropriate
directory where *Note `mysql.server': mysql-server. is located and
executing these commands:

     shell> cp mysql.server /etc/init.d/mysql
     shell> chmod +x /etc/init.d/mysql

*Note*:

Older Red Hat systems use the `/etc/rc.d/init.d' directory rather than
`/etc/init.d'. Adjust the preceding commands accordingly.
Alternatively, first create `/etc/init.d' as a symbolic link that
points to `/etc/rc.d/init.d':

     shell> cd /etc
     shell> ln -s rc.d/init.d .

After installing the script, the commands needed to activate it to run
at system startup depend on your operating system. On Linux, you can
use `chkconfig':

     shell> chkconfig --add mysql

On some Linux systems, the following command also seems to be necessary
to fully enable the *Note `mysql': mysql. script:

     shell> chkconfig --level 345 mysql on

On FreeBSD, startup scripts generally should go in
`/usr/local/etc/rc.d/'. The `rc(8)' manual page states that scripts in
this directory are executed only if their basename matches the `*.sh'
shell file name pattern. Any other files or directories present within
the directory are silently ignored. In other words, on FreeBSD, you
should install the `mysql.server' script as
`/usr/local/etc/rc.d/mysql.server.sh' to enable automatic startup.

As an alternative to the preceding setup, some operating systems also
use `/etc/rc.local' or `/etc/init.d/boot.local' to start additional
services on startup. To start up MySQL using this method, you could
append a command like the one following to the appropriate startup file:

     /bin/sh -c 'cd /usr/local/mysql; ./bin/mysqld_safe --user=mysql &'

For other systems, consult your operating system documentation to see
how to install startup scripts.

You can add options for *Note `mysql.server': mysql-server. in a global
`/etc/my.cnf' file. A typical `/etc/my.cnf' file might look like this:

     [mysqld]
     datadir=/usr/local/mysql/var
     socket=/var/tmp/mysql.sock
     port=3306
     user=mysql

     [mysql.server]
     basedir=/usr/local/mysql

The *Note `mysql.server': mysql-server. script supports the following
options: `basedir', `datadir', and `pid-file'. If specified, they
_must_ be placed in an option file, not on the command line. *Note
`mysql.server': mysql-server.  supports only `start' and `stop' as
command-line arguments.

The following table shows which option groups the server and each
startup script read from option files.

*MySQL Startup scripts and supported server option groups*

Script         Option Groups
*Note          `[mysqld]', `[server]', `[mysqld-MAJOR_VERSION]'
`mysqld':      
mysqld.        
*Note          `[mysqld]', `[server]', `[mysqld_safe]'
`mysqld_safe': 
mysqld-safe.   
*Note          `[mysqld]', `[mysql.server]', `[server]'
`mysql.server':
mysql-server.  

`[mysqld-MAJOR_VERSION]' means that groups with names like
`[mysqld-5.1]' and `[mysqld-5.5]' are read by servers having versions
5.1.x, 5.5.x, and so forth. This feature can be used to specify options
that can be read only by servers within a given release series.

For backward compatibility, *Note `mysql.server': mysql-server. also
reads the `[mysql_server]' group and *Note `mysqld_safe': mysqld-safe.
also reads the `[safe_mysqld]' group. However, you should update your
option files to use the `[mysql.server]' and `[mysqld_safe]' groups
instead when using MySQL 5.5.

For more information on MySQL configuration files and their structure
and contents, see *Note option-files::.


File: manual.info,  Node: starting-server,  Prev: automatic-start,  Up: unix-postinstallation

2.11.1.3 Starting and Troubleshooting the MySQL Server
......................................................

This section provides troubleshooting suggestions for problems starting
the server on Unix. If you are using Windows, see *Note
windows-troubleshooting::.

If you have problems starting the server, here are some things to try:

   * Check the error log to see why the server does not start.

   * Specify any special options needed by the storage engines you are
     using.

   * Make sure that the server knows where to find the data directory.

   * Make sure that the server can access the data directory. The
     ownership and permissions of the data directory and its contents
     must be set such that the server can read and modify them.

   * Verify that the network interfaces the server wants to use are
     available.

Some storage engines have options that control their behavior.  You can
create a `my.cnf' file and specify startup options for the engines that
you plan to use. If you are going to use storage engines that support
transactional tables (`InnoDB', *Note `NDB': mysql-cluster.), be sure
that you have them configured the way you want before starting the
server:

If you are using `InnoDB' tables, see *Note innodb-configuration::.

Storage engines will use default option values if you specify none, but
it is recommended that you review the available options and specify
explicit values for those for which the defaults are not appropriate
for your installation.

When the *Note `mysqld': mysqld. server starts, it changes location to
the data directory. This is where it expects to find databases and
where it expects to write log files. The server also writes the pid
(process ID) file in the data directory.

The data directory location is hardwired in when the server is
compiled. This is where the server looks for the data directory by
default. If the data directory is located somewhere else on your
system, the server will not work properly. You can determine what the
default path settings are by invoking *Note `mysqld': mysqld. with the
`--verbose' and `--help' options.

If the default locations do not match the MySQL installation layout on
your system, you can override them by specifying options to *Note
`mysqld': mysqld. or *Note `mysqld_safe': mysqld-safe. on the command
line or in an option file.

To specify the location of the data directory explicitly, use the
`--datadir' option. However, normally you can tell *Note `mysqld':
mysqld. the location of the base directory under which MySQL is
installed and it looks for the data directory there. You can do this
with the `--basedir' option.

To check the effect of specifying path options, invoke *Note `mysqld':
mysqld. with those options followed by the `--verbose' and `--help'
options. For example, if you change location into the directory where
*Note `mysqld': mysqld. is installed and then run the following
command, it shows the effect of starting the server with a base
directory of `/usr/local':

     shell> ./mysqld --basedir=/usr/local --verbose --help

You can specify other options such as `--datadir' as well, but
`--verbose' and `--help' must be the last options.

Once you determine the path settings you want, start the server without
`--verbose' and `--help'.

If *Note `mysqld': mysqld. is currently running, you can find out what
path settings it is using by executing this command:

     shell> mysqladmin variables

Or:

     shell> mysqladmin -h HOST_NAME variables

HOST_NAME is the name of the MySQL server host.

If you get `Errcode 13' (which means `Permission denied') when starting
*Note `mysqld': mysqld, this means that the privileges of the data
directory or its contents do not permit server access. In this case,
you change the permissions for the involved files and directories so
that the server has the right to use them. You can also start the
server as `root', but this raises security issues and should be avoided.

On Unix, change location into the data directory and check the
ownership of the data directory and its contents to make sure the
server has access. For example, if the data directory is
`/usr/local/mysql/var', use this command:

     shell> ls -la /usr/local/mysql/var

If the data directory or its files or subdirectories are not owned by
the login account that you use for running the server, change their
ownership to that account. If the account is named `mysql', use these
commands:

     shell> chown -R mysql /usr/local/mysql/var
     shell> chgrp -R mysql /usr/local/mysql/var

If it possible that even with correct ownership, MySQL may fail to
start up if there is other security software running on your system
that manages application access to various parts of the file system. In
this case, you may need to reconfigure that software to enable *Note
`mysqld': mysqld. to access the directories it uses during normal
operation.

If the server fails to start up correctly, check the error log.  Log
files are located in the data directory (typically `C:\Program
Files\MySQL\MySQL Server 5.5\data' on Windows, `/usr/local/mysql/data'
for a Unix binary distribution, and `/usr/local/var' for a Unix source
distribution). Look in the data directory for files with names of the
form `HOST_NAME.err' and `HOST_NAME.log', where HOST_NAME is the name
of your server host. Then examine the last few lines of these files. On
Unix, you can use `tail' to display them:

     shell> tail HOST_NAME.err
     shell> tail HOST_NAME.log

The error log should contain information that indicates why the server
could not start.

If either of the following errors occur, it means that some other
program (perhaps another *Note `mysqld': mysqld. server) is using the
TCP/IP port or Unix socket file that *Note `mysqld': mysqld. is trying
to use:

     Can't start server: Bind on TCP/IP port: Address already in use
     Can't start server: Bind on unix socket...

Use `ps' to determine whether you have another *Note `mysqld': mysqld.
server running. If so, shut down the server before starting *Note
`mysqld': mysqld. again. (If another server is running, and you really
want to run multiple servers, you can find information about how to do
so in *Note multiple-servers::.)

If no other server is running, try to execute the command `telnet
YOUR_HOST_NAME TCP_IP_PORT_NUMBER'. (The default MySQL port number is
3306.) Then press Enter a couple of times. If you do not get an error
message like `telnet: Unable to connect to remote host: Connection
refused', some other program is using the TCP/IP port that *Note
`mysqld': mysqld. is trying to use. You will need to track down what
program this is and disable it, or else tell *Note `mysqld': mysqld. to
listen to a different port with the `--port' option. In this case, you
will also need to specify the port number for client programs when
connecting to the server using TCP/IP.

Another reason the port might be inaccessible is that you have a
firewall running that blocks connections to it. If so, modify the
firewall settings to permit access to the port.

If the server starts but you cannot connect to it, you should make sure
that you have an entry in `/etc/hosts' that looks like this:

     127.0.0.1       localhost

If you cannot get *Note `mysqld': mysqld. to start, you can try to make
a trace file to find the problem by using the `--debug' option. See
*Note dbug-package::.


File: manual.info,  Node: default-privileges,  Prev: unix-postinstallation,  Up: postinstallation

2.11.2 Securing the Initial MySQL Accounts
------------------------------------------

Part of the MySQL installation process is to set up the `mysql'
database that contains the grant tables:

   * Windows distributions contain preinitialized grant tables.

   * On Unix, the *Note `mysql_install_db': mysql-install-db. program
     populates the grant tables. Some installation methods run this
     program for you. Others require that you execute it manually.  For
     details, see *Note unix-postinstallation::.

The `mysql.user' grant table defines the initial MySQL user accounts
and their access privileges:

   * Some accounts have the user name `root'.  These are superuser
     accounts that have all privileges and can do anything. The initial
     `root' account passwords are empty, so anyone can connect to the
     MySQL server as `root' _without a password_ and be granted all
     privileges.

        * On Windows, `root' accounts are created that permit
          connections from the local host only.  Connections can be
          made by specifying the host name `localhost', the IP address
          `127.0.0.1', or the IPv6 address `::1'. If the user selects
          the `Enable root access from remote machines' option during
          installation, the Windows installer creates another `root'
          account that permits connections from any host.

        * On Unix, each `root' account permits connections from the
          local host. Connections can be made by specifying the host
          name `localhost', the IP address `127.0.0.1', the IPv6
          address `::1', or the actual host name or IP address.

     An attempt to connect to the host `127.0.0.1' normally resolves to
     the `localhost' account.  However, this fails if the server is run
     with the `--skip-name-resolve' option, so the `127.0.0.1' account
     is useful in that case. The `::1' account is used for IPv6
     connections.

   * Some accounts are for anonymous users. These have an empty user
     name. The anonymous accounts have no password, so anyone can use
     them to connect to the MySQL server.

        * On Windows, there is one anonymous account that permits
          connections from the local host. Connections can be made by
          specifying a host name of `localhost'.

        * On Unix, each anonymous account permits connections from the
          local host. Connections can be made by specifying a host name
          of `localhost' for one of the accounts, or the actual host
          name or IP address for the other.

To display which accounts exist in the `mysql.user' table and check
whether their passwords are empty, use the following statement:

     mysql> SELECT User, Host, Password FROM mysql.user;
     +------+--------------------+----------+
     | User | Host               | Password |
     +------+--------------------+----------+
     | root | localhost          |          |
     | root | myhost.example.com |          |
     | root | 127.0.0.1          |          |
     | root | ::1                |          |
     |      | localhost          |          |
     |      | myhost.example.com |          |
     +------+--------------------+----------+

This output indicates that there are several `root' and anonymous-user
accounts, none of which have passwords. The output might differ on your
system, but the presence of accounts with empty passwords means that
your MySQL installation is unprotected until you do something about it:

   * You should assign a password to each MySQL `root' account.

   * If you want to prevent clients from connecting as anonymous users
     without a password, you should either assign a password to each
     anonymous account or else remove the accounts.

In addition, the `mysql.db' table contains rows that permit all
accounts to access the `test' database and other databases with names
that start with `test_'. This is true even for accounts that otherwise
have no special privileges such as the default anonymous accounts. This
is convenient for testing but inadvisable on production servers.
Administrators who want database access restricted only to accounts
that have permissions granted explicitly for that purpose should remove
these `mysql.db' table rows.

The following instructions describe how to set up passwords for the
initial MySQL accounts, first for the `root' accounts, then for the
anonymous accounts. The instructions also cover how to remove the
anonymous accounts, should you prefer not to permit anonymous access at
all, and describe how to remove permissive access to test databases.
Replace NEWPWD in the examples with the password that you want to use.
Replace HOST_NAME with the name of the server host. You can determine
this name from the output of the preceding *Note `SELECT': select.
statement. For the output shown, HOST_NAME is `myhost.example.com'.

*Note*:

For additional information about setting passwords, see *Note
assigning-passwords::. If you forget your `root' password after setting
it, see *Note resetting-permissions::.

You might want to defer setting the passwords until later, to avoid the
need to specify them while you perform additional setup or testing.
However, be sure to set them before using your installation for
production purposes.

To set up additional accounts, see *Note adding-users::.

* Assigning `root' Account Passwords *

The `root' account passwords can be set several ways. The following
discussion demonstrates three methods:

   * Use the *Note `SET PASSWORD': set-password. statement

   * Use the *Note `UPDATE': update. statement

   * Use the *Note `mysqladmin': mysqladmin. command-line client program

To assign passwords using *Note `SET PASSWORD': set-password, connect
to the server as `root' and issue a *Note `SET PASSWORD': set-password.
statement for each `root' account listed in the `mysql.user' table. Be
sure to encrypt the password using the `PASSWORD()' function.

For Windows, do this:

     shell> mysql -u root
     mysql> SET PASSWORD FOR 'root'@'localhost' = PASSWORD('NEWPWD');
     mysql> SET PASSWORD FOR 'root'@'127.0.0.1' = PASSWORD('NEWPWD');
     mysql> SET PASSWORD FOR 'root'@'::1' = PASSWORD('NEWPWD');
     mysql> SET PASSWORD FOR 'root'@'%' = PASSWORD('NEWPWD');

The last statement is unnecessary if the `mysql.user' table has no
`root' account with a host value of `%'.

For Unix, do this:

     shell> mysql -u root
     mysql> SET PASSWORD FOR 'root'@'localhost' = PASSWORD('NEWPWD');
     mysql> SET PASSWORD FOR 'root'@'127.0.0.1' = PASSWORD('NEWPWD');
     mysql> SET PASSWORD FOR 'root'@'::1' = PASSWORD('NEWPWD');
     mysql> SET PASSWORD FOR 'root'@'HOST_NAME' = PASSWORD('NEWPWD');

You can also use a single statement that assigns a password to all
`root' accounts by using *Note `UPDATE': update. to modify the
`mysql.user' table directly. This method works on any platform:

     shell> mysql -u root
     mysql> UPDATE mysql.user SET Password = PASSWORD('NEWPWD')
         ->     WHERE User = 'root';
     mysql> FLUSH PRIVILEGES;

The *Note `FLUSH': flush. statement causes the server to reread the
grant tables. Without it, the password change remains unnoticed by the
server until you restart it.

To assign passwords to the `root' accounts using *Note `mysqladmin':
mysqladmin, execute the following commands:

     shell> mysqladmin -u root password "NEWPWD"
     shell> mysqladmin -u root -h HOST_NAME password "NEWPWD"

Those commands apply both to Windows and to Unix. The double quotation
marks around the password are not always necessary, but you should use
them if the password contains spaces or other characters that are
special to your command interpreter.

The *Note `mysqladmin': mysqladmin. method of setting the `root'
account passwords does not work for the `'root'@'127.0.0.1'' or
`'root'@'::1'' account. Use the *Note `SET PASSWORD': set-password.
method shown earlier.

After the `root' passwords have been set, you must supply the
appropriate password whenever you connect as `root' to the server. For
example, to shut down the server with *Note `mysqladmin': mysqladmin,
use this command:

     shell> mysqladmin -u root -p shutdown
     Enter password: (ENTER ROOT PASSWORD HERE)

* Assigning Anonymous Account Passwords *

The *Note `mysql': mysql. commands in the following instructions
include a `-p' option based on the assumption that you have set the
`root' account passwords using the preceding instructions and must
specify that password when connecting to the server.

To assign passwords to the anonymous accounts, connect to the server as
`root', then use either *Note `SET PASSWORD': set-password. or *Note
`UPDATE': update. Be sure to encrypt the password using the `PASSWORD()'
function.

To use *Note `SET PASSWORD': set-password. on Windows, do this:

     shell> mysql -u root -p
     Enter password: (ENTER ROOT PASSWORD HERE)
     mysql> SET PASSWORD FOR ''@'localhost' = PASSWORD('NEWPWD');

To use *Note `SET PASSWORD': set-password. on Unix, do this:

     shell> mysql -u root -p
     Enter password: (ENTER ROOT PASSWORD HERE)
     mysql> SET PASSWORD FOR ''@'localhost' = PASSWORD('NEWPWD');
     mysql> SET PASSWORD FOR ''@'HOST_NAME' = PASSWORD('NEWPWD');

To set the anonymous-user account passwords with a single *Note
`UPDATE': update. statement, do this (on any platform):

     shell> mysql -u root -p
     Enter password: (ENTER ROOT PASSWORD HERE)
     mysql> UPDATE mysql.user SET Password = PASSWORD('NEWPWD')
         ->     WHERE User = '';
     mysql> FLUSH PRIVILEGES;

The *Note `FLUSH': flush. statement causes the server to reread the
grant tables. Without it, the password change remains unnoticed by the
server until you restart it.

* Removing Anonymous Accounts *

If you prefer to remove any anonymous accounts rather than assigning
them passwords, do so as follows on Windows:

     shell> mysql -u root -p
     Enter password: (ENTER ROOT PASSWORD HERE)
     mysql> DROP USER ''@'localhost';

On Unix, remove the anonymous accounts like this:

     shell> mysql -u root -p
     Enter password: (ENTER ROOT PASSWORD HERE)
     mysql> DROP USER ''@'localhost';
     mysql> DROP USER ''@'HOST_NAME';

* Securing Test Databases *

By default, the `mysql.db' table contains rows that permit access by
any user to the `test' database and other databases with names that
start with `test_'. (These rows have an empty `User' column value,
which for access-checking purposes matches any user name.) This means
that such databases can be used even by accounts that otherwise possess
no privileges.  If you want to remove any-user access to test
databases, do so as follows:

     shell> mysql -u root -p
     Enter password: (ENTER ROOT PASSWORD HERE)
     mysql> DELETE FROM mysql.db WHERE Db LIKE 'test%';
     mysql> FLUSH PRIVILEGES;

The *Note `FLUSH': flush. statement causes the server to reread the
grant tables. Without it, the privilege change remains unnoticed by the
server until you restart it.

With the preceding change, only users who have global database
privileges or privileges granted explicitly for the `test' database can
use it. However, if you do not want the database to exist at all, drop
it:

     mysql> DROP DATABASE test;

*Note*:

On Windows, you can also perform the process described in this section
using the Configuration Wizard (see *Note
mysql-config-wizard-security::). On all platforms, the MySQL
distribution includes *Note `mysql_secure_installation':
mysql-secure-installation, a command-line utility that automates much
of the process of securing a MySQL installation.


File: manual.info,  Node: upgrading-downgrading,  Next: environment-variables,  Prev: postinstallation,  Up: installing

2.12 Upgrading or Downgrading MySQL
===================================

* Menu:

* upgrading::                    Upgrading MySQL
* downgrading::                  Downgrading MySQL
* checking-table-incompatibilities::  Checking Whether Tables or Indexes Must Be Rebuilt
* rebuilding-tables::            Rebuilding or Repairing Tables or Indexes
* copying-databases::            Copying MySQL Databases to Another Machine


File: manual.info,  Node: upgrading,  Next: downgrading,  Prev: upgrading-downgrading,  Up: upgrading-downgrading

2.12.1 Upgrading MySQL
----------------------

* Menu:

* upgrading-from-previous-series::  Upgrading from MySQL 5.1 to 5.5
* upgrading-from-5-4::           Upgrading from MySQL 5.4 to 5.5

As a general rule, to upgrade from one release series to another, go to
the next series rather than skipping a series. To upgrade from a
release series previous to MySQL 5.1, upgrade to each successive
release series in turn until you have reached MySQL 5.1, and then
proceed with the upgrade to MySQL 5.5. For example, if you currently
are running MySQL 5.0 and wish to upgrade to a newer series, upgrade to
MySQL 5.1 first before upgrading to 5.5, and so forth. For information
on upgrading to MySQL 5.1, see the `MySQL 5.1 Reference Manual'.

There is a special case for upgrading to MySQL 5.5, which is that there
was a short-lived MySQL 5.4 development series. This series is no
longer being worked on, but to accommodate users of both series, this
section includes one subsection for users upgrading from MySQL 5.1 to
5.5 and another for users upgrading from MySQL 5.4 to 5.5.

To upgrade to MySQL 5.5, use the items in the following checklist as a
guide:

   * Before any upgrade, back up your databases, including the `mysql'
     database that contains the grant tables. See *Note
     backup-methods::.

   * Read _all_ the notes in *Note upgrading-from-previous-series::, or
     *Note upgrading-from-5-4::, depending on whether you currently use
     MySQL 5.1 or 5.4. These notes enable you to identify upgrade
     issues that apply to your current MySQL installation. Some
     incompatibilities discussed in that section require your attention
     _before_ upgrading.  Others should be dealt with _after_ upgrading.

   * Read the Release Notes
     (http://dev.mysql.com/doc/relnotes/mysql/5.5/en/) as well, which
     provide information about features that are new in MySQL 5.5 or
     differ from from those found in earlier MySQL releases.

   * After upgrading to a new version of MySQL, run *Note
     `mysql_upgrade': mysql-upgrade. (see *Note mysql-upgrade::). This
     program checks your tables, and attempts to repair them if
     necessary. It also updates your grant tables to make sure that
     they have the current structure so that you can take advantage of
     any new capabilities. (Some releases of MySQL introduce changes to
     the structure of the grant tables to add new privileges or
     features.)

     *Note `mysql_upgrade': mysql-upgrade. does not upgrade the contents
     of the help tables. For upgrade instructions, see *Note
     server-side-help-support::.

   * If you run MySQL Server on Windows, see *Note windows-upgrading::.

   * If you use replication, see *Note replication-upgrade::, for
     information on upgrading your replication setup.

   * If you use `InnoDB', consider setting `innodb_fast_shutdown' to 0
     before shutting down and upgrading your server. When you set
     `innodb_fast_shutdown' to 0, `InnoDB' does a slow shutdown, a full
     purge and an insert buffer merge before shutting down, which
     ensures that all data files are fully prepared in case the upgrade
     process modifies the file format.

   * If you upgrade an installation originally produced by installing
     multiple RPM packages, it is best to upgrade all the packages, not
     just some. For example, if you previously installed the server and
     client RPMs, do not upgrade just the server RPM.

   * If you have created a user-defined function (UDF) with a given
     name and upgrade MySQL to a version that implements a new built-in
     function with the same name, the UDF becomes inaccessible. To
     correct this, use *Note `DROP FUNCTION': drop-function. to drop
     the UDF, and then use *Note `CREATE FUNCTION': create-function. to
     re-create the UDF with a different nonconflicting name. The same
     is true if the new version of MySQL implements a built-in function
     with the same name as an existing stored function. See *Note
     function-resolution::, for the rules describing how the server
     interprets references to different kinds of functions.

For upgrades between versions of a MySQL release series that has
reached General Availability status, you can move the MySQL format
files and data files between different versions on systems with the
same architecture. For upgrades to a version of a MySQL release series
that is in development status, that is not necessarily true. Use of
development releases is at your own risk.

If you are cautious about using new versions, you can always rename
your old *Note `mysqld': mysqld. before installing a newer one. For
example, if you are using a version of MySQL 5.1 and want to upgrade to
5.5, rename your current server from *Note `mysqld': mysqld. to
`mysqld-5.1'. If your new *Note `mysqld': mysqld. then does something
unexpected, you can simply shut it down and restart with your old *Note
`mysqld': mysqld.

If problems occur, such as that the new *Note `mysqld': mysqld.  server
does not start or that you cannot connect without a password, verify
that you do not have an old `my.cnf' file from your previous
installation.  You can check this with the `--print-defaults' option
(for example, *Note `mysqld --print-defaults': mysqld.). If this
command displays anything other than the program name, you have an
active `my.cnf' file that affects server or client operation.

If, after an upgrade, you experience problems with compiled client
programs, such as `Commands out of sync' or unexpected core dumps, you
probably have used old header or library files when compiling your
programs. In this case, you should check the date for your `mysql.h'
file and `libmysqlclient.a' library to verify that they are from the
new MySQL distribution. If not, recompile your programs with the new
headers and libraries. Recompilation might also be necessary for
programs compiled against the shared client library if the library
major version number has changed (for example from
`libmysqlclient.so.15' to `libmysqlclient.so.16'.

If your MySQL installation contains a large amount of data that might
take a long time to convert after an in-place upgrade, you might find
it useful to create a `dummy' database instance for assessing what
conversions might be needed and the work involved to perform them. Make
a copy of your MySQL instance that contains a full copy of the `mysql'
database, plus all other databases without data. Run your upgrade
procedure on this dummy instance to see what actions might be needed so
that you can better evaluate the work involved when performing actual
data conversion on your original database instance.

It is a good idea to rebuild and reinstall the Perl `DBD::mysql' module
whenever you install a new release of MySQL. The same applies to other
MySQL interfaces as well, such as PHP `mysql' extensions and the Python
`MySQLdb' module.


File: manual.info,  Node: upgrading-from-previous-series,  Next: upgrading-from-5-4,  Prev: upgrading,  Up: upgrading

2.12.1.1 Upgrading from MySQL 5.1 to 5.5
........................................

*Note*:

It is good practice to back up your data before installing any new
version of software. Although MySQL works very hard to ensure a high
level of quality, you should protect your data by making a backup.

To upgrade to 5.5 from any previous version, MySQL recommends that you
dump your tables with *Note `mysqldump': mysqldump. before upgrading
and reload the dump file after upgrading. Use the `--all-databases'
option to include all databases in the dump. If your databases include
stored programs, use the `--routines' and `--events' options as well.

In general, you should do the following when upgrading from MySQL 5.1
to 5.5:

   * Read _all_ the items in these sections to see whether any of them
     might affect your applications:

        * *Note upgrading::, has general update information.

        * The items in the change lists provided later in this section
          enable you to identify upgrade issues that apply to your
          current MySQL installation. Some incompatibilities discussed
          there require your attention _before_ upgrading. Others
          should be dealt with _after_ upgrading.

        * The MySQL 5.5 Release Notes
          (http://dev.mysql.com/doc/relnotes/mysql/5.5/en/) describe
          significant new features you can use in 5.5 or that differ
          from those found in earlier MySQL releases. Some of these
          changes may result in incompatibilities.

     Note particularly any changes that are marked *Known issue* or
     *Incompatible change*. These incompatibilities with earlier
     versions of MySQL may require your attention _before you upgrade_.
     Our aim is to avoid these changes, but occasionally they are
     necessary to correct problems that would be worse than an
     incompatibility between releases. If any upgrade issue applicable
     to your installation involves an incompatibility that requires
     special handling, follow the instructions given in the
     incompatibility description. Sometimes this involves dumping and
     reloading tables, or use of a statement such as *Note `CHECK
     TABLE': check-table. or *Note `REPAIR TABLE': repair-table.

     For dump and reload instructions, see *Note rebuilding-tables::.
     Any procedure that involves *Note `REPAIR TABLE': repair-table.
     with the `USE_FRM' option _must_ be done before upgrading. Use of
     this statement with a version of MySQL different from the one used
     to create the table (that is, using it after upgrading) may damage
     the table. See *Note repair-table::.

   * Before upgrading to a new version of MySQL, *Note
     checking-table-incompatibilities::, to see whether changes to
     table formats or to character sets or collations were made between
     your current version of MySQL and the version to which you are
     upgrading. If so and these changes result in an incompatibility
     between MySQL versions, you will need to upgrade the affected
     tables using the instructions in *Note rebuilding-tables::.

   * After upgrading to a new version of MySQL, run *Note
     `mysql_upgrade': mysql-upgrade. (see *Note mysql-upgrade::). This
     program checks your tables, and attempts to repair them if
     necessary. It also updates your grant tables to make sure that
     they have the current structure so that you can take advantage of
     any new capabilities. (Some releases of MySQL introduce changes to
     the structure of the grant tables to add new privileges or
     features.)

     *Note `mysql_upgrade': mysql-upgrade. does not upgrade the
     contents of the help tables. For upgrade instructions, see *Note
     server-side-help-support::.

   * If you run MySQL Server on Windows, see *Note windows-upgrading::.

   * If you use replication, see *Note replication-upgrade::, for
     information on upgrading your replication setup.

If your MySQL installation contains a large amount of data that might
take a long time to convert after an in-place upgrade, you might find
it useful to create a `dummy' database instance for assessing what
conversions might be needed and the work involved to perform them. Make
a copy of your MySQL instance that contains a full copy of the `mysql'
database, plus all other databases without data. Run your upgrade
procedure on this dummy instance to see what actions might be needed so
that you can better evaluate the work involved when performing actual
data conversion on your original database instance.

The following lists describe changes that may affect applications and
that you should watch out for when upgrading from MySQL 5.1 to 5.5.

* Configuration Changes *

   * *Incompatible change*: The `InnoDB Plugin' is included in MySQL
     5.5 releases. It becomes the built-in version of `InnoDB' in MySQL
     Server, replacing the version previously included as the built-in
     `InnoDB' engine. `InnoDB Plugin' is also available in MySQL 5.1 as
     of 5.1.38, but it is an optional storage engine that must be
     enabled explicitly using two server options:

          [mysqld]
          ignore-builtin-innodb
          plugin-load=innodb=ha_innodb_plugin.so

     If you were using `InnoDB Plugin' in MySQL 5.1 by means of those
     options, you must remove them after an upgrade to 5.5 or the
     server will fail to start.

     In addition, in `InnoDB Plugin', the `innodb_file_io_threads'
     system variable has been removed and replaced with
     `innodb_read_io_threads' and `innodb_write_io_threads'. If you
     upgrade from MySQL 5.1 to MySQL 5.5 and previously explicitly set
     `innodb_file_io_threads' at server startup, you must change your
     configuration. Either remove any reference to
     `innodb_file_io_threads' or replace it with references to
     `innodb_read_io_threads' and `innodb_write_io_threads'.

   * *Incompatible change*: In MySQL 5.5, the server includes a plugin
     services interface that complements the plugin API. The services
     interface enables server functionality to be exposed as a
     `service' that plugins can access through a function-call
     interface. The `libmysqlservices' library provides access to the
     available services and dynamic plugins now must be linked against
     this library (use the `-lmysqlservices' flag). For an example
     showing how to configure for `CMake', see *Note plugin-services::.

* Server Changes *

   * *Known issue*: As of MySQL 5.5.32, for new installations, the `url'
     columns in the `mysql' datatbase help tables are now created as
     type *Note `TEXT': blob. to accommodate longer URLs. For upgrades,
     *Note `mysql_upgrade': mysql-upgrade. does _not_ update the
     columns. Modify them manually using these statements:

          ALTER TABLE mysql.help_category MODIFY url TEXT NOT NULL;
          ALTER TABLE mysql.help_topic MODIFY url TEXT NOT NULL;

   * *Incompatible change*: As of MySQL 5.5.3, due to work done for Bug
     #989, *Note `FLUSH TABLES': flush. is not permitted when there is
     an active *Note `LOCK TABLES ... READ': lock-tables. To provide a
     workaround for this restriction, *Note `FLUSH TABLES': flush. has
     a new variant, *Note `FLUSH TABLES TBL_LIST WITH READ LOCK':
     flush, that enables tables to be flushed and locked in a single
     operation. As a result of this change, applications that
     previously used this statement sequence to lock and flush tables
     will fail:

          LOCK TABLES TBL_LIST READ;
          FLUSH TABLES TBL_LIST;

     Such applications should now use this statement instead:

          FLUSH TABLES TBL_LIST WITH READ LOCK;

   * *Incompatible change*: As of MySQL 5.5.7, the server requires that
     a new grant table, `proxies_priv', be present in the `mysql'
     database. If you are upgrading to 5.5.7 from a previous MySQL
     release rather than performing a new installation, the server will
     find that this table is missing and exit during startup with the
     following message:

          Table 'mysql.proxies_priv' doesn't exist

     To create the `proxies_priv' table, start the server with the
     `--skip-grant-tables' option to cause it to skip the normal grant
     table checks, then run *Note `mysql_upgrade': mysql-upgrade. For
     example:

          shell> mysqld --skip-grant-tables &
          shell> mysql_upgrade

     Then stop the server and restart it normally.

     You can specify other options on the *Note `mysqld': mysqld.
     command line if necessary.  Alternatively, if your installation is
     configured so that the server normally reads options from an
     option file, use the `--defaults-file' option to specify the file
     (enter each command on a single line):

          shell> mysqld --defaults-file=/usr/local/mysql/etc/my.cnf
                   --skip-grant-tables &
          shell> mysql_upgrade

     With the `--skip-grant-tables' option, the server does no password
     or privilege checking, so any client can connect and effectively
     have all privileges. For additional security, use the
     `--skip-networking' option as well to prevent remote clients from
     connecting.

     *Note*:

     This problem is fixed in MySQL 5.5.8; the server treats a missing
     `proxies_priv' table as equivalent to an empty table. However,
     after starting the server, you should still run *Note
     `mysql_upgrade': mysql-upgrade. to create the table.

   * *Incompatible change*: As of MySQL 5.5.7, `InnoDB' always uses the
     fast truncation technique, equivalent to *Note `DROP TABLE':
     drop-table. and *Note `CREATE TABLE': create-table. It no longer
     performs a row-by-row delete for tables with parent-child foreign
     key relationships. *Note `TRUNCATE TABLE': truncate-table. returns
     an error for such tables. Modify your SQL to issue `DELETE FROM
     TABLE_NAME' for such tables instead.

   * *Incompatible change*: Prior to MySQL 5.5.7, if you flushed the
     logs using *Note `FLUSH LOGS': flush.  or *Note `mysqladmin
     flush-logs': mysqladmin. and *Note `mysqld': mysqld. was writing
     the error log to a file (for example, if it was started with the
     `--log-error' option), it renames the current log file with the
     suffix `-old', then created a new empty log file.  This had the
     problem that a second log-flushing operation thus caused the
     original error log file to be lost unless you saved it under a
     different name. For example, you could use the following commands
     to save the file:

          shell> mysqladmin flush-logs
          shell> mv HOST_NAME.err-old BACKUP-DIRECTORY

     To avoid the preceding file-loss problem, no renaming occurs as of
     MySQL 5.5.7; the server merely closes and reopens the log file. To
     rename the file, you can do so manually before flushing. Then
     flushing the logs reopens a new file with the original file name.
     For example, you can rename the file and create a new one using
     the following commands:

          shell> mv HOST_NAME.err HOST_NAME.err-old
          shell> mysqladmin flush-logs
          shell> mv HOST_NAME.err-old BACKUP-DIRECTORY

   * *Incompatible change*: As of MySQL 5.5.6, handling of *Note
     `CREATE TABLE IF NOT EXISTS ... SELECT': create-table-select.
     statements has been changed for the case that the destination
     table already exists:

        * Previously, for *Note `CREATE TABLE IF NOT EXISTS ...
          SELECT': create-table-select, MySQL produced a warning that
          the table exists, but inserted the rows and wrote the
          statement to the binary log anyway. By contrast, *Note
          `CREATE TABLE ... SELECT': create-table-select. (without `IF
          NOT EXISTS') failed with an error, but MySQL inserted no rows
          and did not write the statement to the binary log.

        * MySQL now handles both statements the same way when the
          destination table exists, in that neither statement inserts
          rows or is written to the binary log. The difference between
          them is that MySQL produces a warning when `IF NOT EXISTS' is
          present and an error when it is not.

     This change in handling of `IF NOT EXISTS' results in an
     incompatibility for statement-based replication from a MySQL 5.1
     master with the original behavior and a MySQL 5.5 slave with the
     new behavior.  Suppose that *Note `CREATE TABLE IF NOT EXISTS ...
     SELECT': create-table-select. is executed on the master and the
     destination table exists. The result is that rows are inserted on
     the master but not on the slave.  (Row-based replication does not
     have this problem.)

     To address this issue, statement-based binary logging for *Note
     `CREATE TABLE IF NOT EXISTS ... SELECT': create-table-select. is
     changed in MySQL 5.1 as of 5.1.51:

        * If the destination table does not exist, there is no change:
          The statement is logged as is.

        * If the destination table does exist, the statement is logged
          as the equivalent pair of *Note `CREATE TABLE IF NOT EXISTS':
          create-table-select. and *Note `INSERT ... SELECT':
          insert-select. statements. (If the *Note `SELECT': select. in
          the original statement is preceded by `IGNORE' or *Note
          `REPLACE': replace, the *Note `INSERT': insert. becomes *Note
          `INSERT IGNORE': insert. or *Note `REPLACE': replace,
          respectively.)

     This change provides forward compatibility for statement-based
     replication from MySQL 5.1 to 5.5 because when the destination
     table exists, the rows will be inserted on both the master and
     slave. To take advantage of this compatibility measure, the 5.1
     server must be at least 5.1.51 and the 5.5 server must be at least
     5.5.6.

     To upgrade an existing 5.1-to-5.5 replication scenario, upgrade
     the master first to 5.1.51 or higher. Note that this differs from
     the usual replication upgrade advice of upgrading the slave first.

     A workaround for applications that wish to achieve the original
     effect (rows inserted regardless of whether the destination table
     exists) is to use *Note `CREATE TABLE IF NOT EXISTS':
     create-table-select. and *Note `INSERT ... SELECT': insert-select.
     statements rather than *Note `CREATE TABLE IF NOT EXISTS ...
     SELECT': create-table-select. statements.

     Along with the change just described, the following related change
     was made: Previously, if an existing view was named as the
     destination table for *Note `CREATE TABLE IF NOT EXISTS ...
     SELECT': create-table-select, rows were inserted into the
     underlying base table and the statement was written to the binary
     log. As of MySQL 5.1.51 and 5.5.6, nothing is inserted or logged.

   * *Incompatible change*: Prior to MySQL 5.5.6, if the server was
     started with `character_set_server' set to `utf16', it crashed
     during full-text stopword initialization. Now the stopword file is
     loaded and searched using `latin1' if `character_set_server' is
     `ucs2', `utf16', or `utf32'. If any table was created with
     `FULLTEXT' indexes while the server character set was `ucs2',
     `utf16', or `utf32', it should be repaired using this statement:

          REPAIR TABLE TBL_NAME QUICK;

   * *Incompatible change*: As of MySQL 5.5.5, all numeric operators
     and functions on integer, floating-point and *Note `DECIMAL':
     fixed-point-types.  values throw an `out of range' error
     (`ER_DATA_OUT_OF_RANGE') rather than returning an incorrect value
     or `NULL', when the result is out of the supported range for the
     corresponding data type. See *Note out-of-range-and-overflow::.

   * *Incompatible change*: In very old versions of MySQL (prior to
     4.1), the *Note `TIMESTAMP': datetime. data type supported a
     display width, which was silently ignored beginning with MySQL
     4.1. This is deprecated in MySQL 5.1, and removed altogether in
     MySQL 5.5. These changes in behavior can lead to two problem
     scenarios when trying to use *Note `TIMESTAMP(N)': datetime.
     columns with a MySQL 5.5 or later server:

        * When importing a dump file (for example, one created using
          *Note `mysqldump': mysqldump.) created in a MySQL 5.0 or
          earlier server into a server from a newer release series, a
          *Note `CREATE TABLE': create-table. or *Note `ALTER TABLE':
          alter-table. statement containing *Note `TIMESTAMP(N)':
          datetime.  causes the import to fail with a syntax error.

          To fix this problem, edit the dump file in a text editor to
          replace any instances of *Note `TIMESTAMP(N)': datetime.
          with *Note `TIMESTAMP': datetime. prior to importing the
          file. Be sure to use a plain text editor for this, and not a
          word processor; otherwise, the result is almost certain to be
          unusable for importing into the MySQL server.

        * When trying replicate any *Note `CREATE TABLE': create-table.
          or *Note `ALTER TABLE': alter-table. statement containing
          *Note `TIMESTAMP(N)': datetime.  from a master MySQL server
          that supports the *Note `TIMESTAMP(N)': datetime.  syntax to
          a MySQL 5.5.3 or newer slave, the statement causes
          replication to fail. Similarly, when you try to restore from
          a binary log written by a server that supports *Note
          `TIMESTAMP(N)': datetime.  to a MySQL 5.5.3 or newer server,
          any *Note `CREATE TABLE': create-table. or *Note `ALTER
          TABLE': alter-table. statement containing *Note
          `TIMESTAMP(N)': datetime.  causes the backup to fail. This
          holds true regardless of the logging format.

          It may be possible to fix such issues using a hex editor, by
          replacing any width arguments used with *Note `TIMESTAMP':
          datetime, and the parentheses containing them, with space
          characters (hexadecimal `20').

          Be sure to use a programmer's binary hex editor and not a
          regular text editor or word processor for this; otherwise,
          the result is almost certain to be a corrupted binary log
          file. To guard against accidental corruption of the binary
          log, you should always work on a copy of the file rather than
          the original.

     You should try to handle potential issues of these types
     proactively by updating with *Note `ALTER TABLE': alter-table. any
     *Note `TIMESTAMP(N)': datetime. columns in your databases so that
     they use *Note `TIMESTAMP': datetime. instead, before performing
     any upgrades.

   * *Incompatible change*: As of MySQL 5.5.3, the Unicode
     implementation has been extended to provide support for
     supplementary characters that lie outside the Basic Multilingual
     Plane (BMP). Noteworthy features:

        * `utf16' and `utf32' character sets have been added. These
          correspond to the UTF-16 and UTF-32 encodings of the Unicode
          character set, and they both support supplementary characters.

        * The `utf8mb4' character set has been added. This is similar
          to `utf8', but its encoding allows up to four bytes per
          character to enable support for supplementary characters.

        * The `ucs2' character set is essentially unchanged except for
          the inclusion of some newer BMP characters.

     In most respects, upgrading to MySQL 5.5 should present few
     problems with regard to Unicode usage, although there are some
     potential areas of incompatibility. These are the primary areas of
     concern:

        * For the variable-length character data types (*Note
          `VARCHAR': char. and the *Note `TEXT': blob. types), the
          maximum length in characters is less for `utf8mb4' columns
          than for `utf8' columns.

        * For all character data types (*Note `CHAR': char, *Note
          `VARCHAR': char, and the *Note `TEXT': blob. types), the
          maximum number of characters that can be indexed is less for
          `utf8mb4' columns than for `utf8' columns.

     Consequently, if you want to upgrade tables from `utf8' to
     `utf8mb4' to take advantage of supplementary-character support, it
     may be necessary to change some column or index definitions.

     For additional details about the new Unicode character sets and
     potential incompatibilities, see *Note charset-unicode::, and
     *Note charset-unicode-upgrading::.

   * *Incompatible change*: As of MySQL 5.5.3, the server includes
     `dtoa', a library for conversion between strings and numbers by
     David M. Gay. In MySQL, this library provides the basis for
     improved conversion between string or *Note `DECIMAL':
     fixed-point-types. values and approximate-value (*Note `FLOAT':
     floating-point-types. or *Note `DOUBLE': floating-point-types.)
     numbers.

     Because the conversions produced by this library differ in some
     cases from previous results, the potential exists for
     incompatibilities in applications that rely on previous results.
     For example, applications that depend on a specific exact result
     from previous conversions might need adjustment to accommodate
     additional precision.

     For additional information about the properties of `dtoa'
     conversions, see *Note type-conversion::.

   * *Incompatible change*: In MySQL 5.5, several changes were made
     regarding the language and character set of error messages:

        * The `--language' option for specifying the directory for the
          error message file is now deprecated. The new
          `lc_messages_dir' and `lc_messages' system variables should
          be used instead, and the server treats `--language' as an
          alias for `lc_messages_dir'.

        * The `language' system variable has been removed and replaced
          with the new `lc_messages_dir' and `lc_messages' system
          variables.  `lc_messages_dir' has only a global value and is
          read only.  `lc_messages' has global and session values and
          can be modified at runtime, so the error message language can
          be changed while the server is running, and individual
          clients each can have a different error message language by
          changing their session `lc_messages' value to a different
          locale name.

        * Error messages previously were constructed in a mix of
          character sets. This issue is resolved by constructing error
          messages internally within the server using UTF-8 and
          returning them to the client in the character set specified
          by the `character_set_results' system variable. The content
          of error messages therefore may in some cases differ from the
          messages returned previously.

     For more information, see *Note error-message-language::, and
     *Note charset-errors::.

   * *Incompatible change*: MySQL 5.5 implements new functions used to
     calculate row placement for tables partitioned by `KEY' and
     `LINEAR KEY'. Tables that were created using `KEY' or `LINEAR KEY'
     partitioning in MySQL 5.1 can be upgraded in MySQL 5.5.31 and
     later using `ALTER TABLE ... PARTITION BY ALGORITHM=2 [LINEAR] KEY
     (...)'.  (Bug #14521864, Bug #66462)

* SQL Changes *

   * *Incompatible change*: Previously, the parser accepted an `INTO'
     clause in nested *Note `SELECT': select.  statements, which is
     invalid because such statements must return their results to the
     outer context. As of MySQL 5.5.3, this syntax is no longer
     permitted and statements that use it must be changed.

   * *Incompatible change*: In MySQL 5.5.3, several changes were made
     to alias resolution in multiple-table *Note `DELETE': delete.
     statements so that it is no longer possible to have inconsistent
     or ambiguous table aliases.

        * In MySQL 5.1.23, alias declarations outside the
          TABLE_REFERENCES part of the statement were disallowed for the
          `USING' variant of multiple-table *Note `DELETE': delete.
          syntax, to reduce the possibility of ambiguous aliases that
          could lead to ambiguous statements that have unexpected
          results such as deleting rows from the wrong table.

          As of MySQL 5.5.3, alias declarations outside
          TABLE_REFERENCES are disallowed for all multiple-table *Note
          `DELETE': delete. statements. Alias declarations are
          permitted only in the TABLE_REFERENCES part.

          Incorrect:

               DELETE FROM t1 AS a2 USING t1 AS a1 INNER JOIN t2 AS a2;
               DELETE t1 AS a2 FROM t1 AS a1 INNER JOIN t2 AS a2;

          Correct:

               DELETE FROM t1 USING t1 AS a1 INNER JOIN t2 AS a2;
               DELETE t1 FROM t1 AS a1 INNER JOIN t2 AS a2;

        * Previously, for alias references in the list of tables from
          which to delete rows in a multiple-table delete, the default
          database is used unless one is specified explicitly. For
          example, if the default database is `db1', the following
          statement does not work because the unqualified alias
          reference `a2' is interpreted as having a database of `db1':

               DELETE a1, a2 FROM db1.t1 AS a1 INNER JOIN db2.t2 AS a2
               WHERE a1.id=a2.id;

          To correctly match an alias that refers to a table outside
          the default database, you must explicitly qualify the
          reference with the name of the proper database:

               DELETE a1, db2.a2 FROM db1.t1 AS a1 INNER JOIN db2.t2 AS a2
               WHERE a1.id=a2.id;

          As of MySQL 5.5.3, alias resolution does not require
          qualification and alias references should not be qualified
          with the database name. Qualified names are interpreted as
          referring to tables, not aliases.

     Statements containing alias constructs that are no longer
     permitted must be rewritten.

   * Some keywords may be reserved in MySQL 5.5 that were not reserved
     in MySQL 5.1. See *Note reserved-words::.


File: manual.info,  Node: upgrading-from-5-4,  Prev: upgrading-from-previous-series,  Up: upgrading

2.12.1.2 Upgrading from MySQL 5.4 to 5.5
........................................

This section is for the special case of upgrading to MySQL 5.5 from the
short-lived MySQL 5.4 development series, which is no longer being
worked on.

*Note*:

It is good practice to back up your data before installing any new
version of software. Although MySQL works very hard to ensure a high
level of quality, you should protect your data by making a backup.

To upgrade to 5.5 from any previous version, MySQL recommends that you
dump your tables with *Note `mysqldump': mysqldump. before upgrading
and reload the dump file after upgrading. Use the `--all-databases'
option to include all databases in the dump. If your databases include
stored programs, use the `--routines' and `--events' options as well.

In general, you should do the following when upgrading from MySQL 5.4
to 5.5:

   * Read _all_ the items in these sections to see whether any of them
     might affect your applications:

        * *Note upgrading::, has general update information.

        * The items in the change lists provided later in this section
          enable you to identify upgrade issues that apply to your
          current MySQL installation. Some incompatibilities discussed
          there require your attention _before_ upgrading. Others
          should be dealt with _after_ upgrading.

        * The MySQL 5.5 Release Notes
          (http://dev.mysql.com/doc/relnotes/mysql/5.5/en/) describe
          significant new features you can use in 5.5 or that differ
          from those found in earlier MySQL releases. Some of these
          changes may result in incompatibilities.

     Note particularly any changes that are marked *Known issue* or
     *Incompatible change*. These incompatibilities with earlier
     versions of MySQL may require your attention _before you upgrade_.
     Our aim is to avoid these changes, but occasionally they are
     necessary to correct problems that would be worse than an
     incompatibility between releases. If any upgrade issue applicable
     to your installation involves an incompatibility that requires
     special handling, follow the instructions given in the
     incompatibility description. Sometimes this involves dumping and
     reloading tables, or use of a statement such as *Note `CHECK
     TABLE': check-table. or *Note `REPAIR TABLE': repair-table.

     For dump and reload instructions, see *Note rebuilding-tables::.
     Any procedure that involves *Note `REPAIR TABLE': repair-table.
     with the `USE_FRM' option _must_ be done before upgrading. Use of
     this statement with a version of MySQL different from the one used
     to create the table (that is, using it after upgrading) may damage
     the table. See *Note repair-table::.

   * Before upgrading to a new version of MySQL, *Note
     checking-table-incompatibilities::, to see whether changes to
     table formats or to character sets or collations were made between
     your current version of MySQL and the version to which you are
     upgrading. If so and these changes result in an incompatibility
     between MySQL versions, you will need to upgrade the affected
     tables using the instructions in *Note rebuilding-tables::.

   * After upgrading to a new version of MySQL, run *Note
     `mysql_upgrade': mysql-upgrade. (see *Note mysql-upgrade::). This
     program checks your tables, and attempts to repair them if
     necessary. It also updates your grant tables to make sure that
     they have the current structure so that you can take advantage of
     any new capabilities. (Some releases of MySQL introduce changes to
     the structure of the grant tables to add new privileges or
     features.)

     *Note `mysql_upgrade': mysql-upgrade. does not upgrade the
     contents of the help tables. For upgrade instructions, see *Note
     server-side-help-support::.

   * If you run MySQL Server on Windows, see *Note windows-upgrading::.

   * If you use replication, see *Note replication-upgrade::, for
     information on upgrading your replication setup.

If your MySQL installation contains a large amount of data that might
take a long time to convert after an in-place upgrade, you might find
it useful to create a `dummy' database instance for assessing what
conversions might be needed and the work involved to perform them. Make
a copy of your MySQL instance that contains a full copy of the `mysql'
database, plus all other databases without data. Run your upgrade
procedure on this dummy instance to see what actions might be needed so
that you can better evaluate the work involved when performing actual
data conversion on your original database instance.

The following lists describe changes that may affect applications and
that you should watch out for when upgrading from MySQL 5.4 to 5.5.

* Configuration Changes *

   * *Incompatible change*: In MySQL 5.5, the server includes a plugin
     services interface that complements the plugin API. The services
     interface enables server functionality to be exposed as a
     `service' that plugins can access through a function-call
     interface. The `libmysqlservices' library provides access to the
     available services and dynamic plugins now must be linked against
     this library (use the `-lmysqlservices' flag). For an example
     showing how to configure for `CMake', see *Note plugin-services::.

* Server Changes *

   * *Incompatible change*: As of MySQL 5.5.7, the server requires that
     a new grant table, `proxies_priv', be present in the `mysql'
     database. If you are upgrading from a previous MySQL release
     rather than performing a new installation, the server will find
     that this table is missing and exit during startup with the
     following message:

          Table 'mysql.proxies_priv' doesn't exist

     To create the `proxies_priv' table, start the server with the
     `--skip-grant-tables' option to cause it to skip the normal grant
     table checks, then run *Note `mysql_upgrade': mysql-upgrade. For
     example:

          shell> mysqld --skip-grant-tables &
          shell> mysql_upgrade

     Then stop the server and restart it normally.

     You can specify other options on the *Note `mysqld': mysqld.
     command line if necessary.  Alternatively, if your installation is
     configured so that the server normally reads options from an
     option file, use the `--defaults-file' option to specify the file
     (enter each command on a single line):

          shell> mysqld --defaults-file=/usr/local/mysql/etc/my.cnf
                   --skip-grant-tables &
          shell> mysql_upgrade

     With the `--skip-grant-tables' option, the server does no password
     or privilege checking, so any client can connect and effectively
     have all privileges. For additional security, use the
     `--skip-networking' option as well to prevent remote clients from
     connecting.

   * *Incompatible change*: As of MySQL 5.5.3, the Unicode
     implementation has been extended to provide support for
     supplementary characters that lie outside the Basic Multilingual
     Plane (BMP). Noteworthy features:

        * `utf16' and `utf32' character sets have been added. These
          correspond to the UTF-16 and UTF-32 encodings of the Unicode
          character set, and they both support supplementary characters.

        * The `utf8mb4' character set has been added. This is similar
          to `utf8', but its encoding allows up to four bytes per
          character to enable support for supplementary characters.

        * The `ucs2' character set is essentially unchanged except for
          the inclusion of some newer BMP characters.

     In most respects, upgrading to MySQL 5.5 should present few
     problems with regard to Unicode usage, although there are some
     potential areas of incompatibility. These are the primary areas of
     concern:

        * For the variable-length character data types (*Note
          `VARCHAR': char. and the *Note `TEXT': blob. types), the
          maximum length in characters is less for `utf8mb4' columns
          than for `utf8' columns.

        * For all character data types (*Note `CHAR': char, *Note
          `VARCHAR': char, and the *Note `TEXT': blob. types), the
          maximum number of characters that can be indexed is less for
          `utf8mb4' columns than for `utf8' columns.

     Consequently, if you want to upgrade tables from `utf8' to
     `utf8mb4' to take advantage of supplementary-character support, it
     may be necessary to change some column or index definitions.

     For additional details about the new Unicode character sets and
     potential incompatibilities, see *Note charset-unicode::, and
     *Note charset-unicode-upgrading::.

   * *Incompatible change*: As of MySQL 5.5.3, the server includes
     `dtoa', a library for conversion between strings and numbers by
     David M. Gay. In MySQL, this library provides the basis for
     improved conversion between string or *Note `DECIMAL':
     fixed-point-types. values and approximate-value (*Note `FLOAT':
     floating-point-types./*Note `DOUBLE': floating-point-types.)
     numbers.

     Because the conversions produced by this library differ in some
     cases from previous results, the potential exists for
     incompatibilities in applications that rely on previous results.
     For example, applications that depend on a specific exact result
     from previous conversions might need adjustment to accommodate
     additional precision.

     For additional information about the properties of `dtoa'
     conversions, see *Note type-conversion::.

   * *Incompatible change*: In MySQL 5.5, several changes were made
     regarding the language and character set of error messages:

        * The `--language' option for specifying the directory for the
          error message file is now deprecated. The new
          `lc_messages_dir' and `lc_messages' system variables should
          be used instead, and the server treats `--language' as an
          alias for `lc_messages_dir'.

        * The `language' system variable has been removed and replaced
          with the new `lc_messages_dir' and `lc_messages' system
          variables.  `lc_messages_dir' has only a global value and is
          read only.  `lc_messages' has global and session values and
          can be modified at runtime, so the error message language can
          be changed while the server is running, and individual
          clients each can have a different error message language by
          changing their session `lc_messages' value to a different
          locale name.

        * Error messages previously were constructed in a mix of
          character sets. This issue is resolved by constructing error
          messages internally within the server using UTF-8 and
          returning them to the client in the character set specified
          by the `character_set_results' system variable. The content
          of error messages therefore may in some cases differ from the
          messages returned previously.

     For more information, see *Note error-message-language::, and
     *Note charset-errors::.

   * Before MySQL 5.1.36, plugin options were boolean options (see
     *Note option-modifiers::). If you upgrade to MySQL 5.5 from a
     version older than 5.1.36 and previously used options of the form
     `--PLUGIN_NAME=0' or `--PLUGIN_NAME=1', the equivalent options are
     now `--PLUGIN_NAME=OFF' and `--PLUGIN_NAME=ON', respectively. You
     also have the choice of requiring plugins to start successfully by
     using `--PLUGIN_NAME=FORCE' or
     `--PLUGIN_NAME=FORCE_PLUS_PERMANENT'.

* SQL Changes *

   * *Incompatible change*: Previously, the parser accepted an `INTO'
     clause in nested *Note `SELECT': select.  statements, which is
     invalid because such statements must return their results to the
     outer context. As of MySQL 5.5.3, this syntax is no longer
     permitted and statements that use it must be changed.

   * Some keywords may be reserved in MySQL 5.5 that were not reserved
     in MySQL 5.4. See *Note reserved-words::.


File: manual.info,  Node: downgrading,  Next: checking-table-incompatibilities,  Prev: upgrading,  Up: upgrading-downgrading

2.12.2 Downgrading MySQL
------------------------

* Menu:

* downgrading-to-previous-series::  Downgrading to MySQL 5.1
* downgrading-from-enterprise::  Downgrading from MySQL Enterprise Edition to MySQL Community Server

This section describes what you should do to downgrade to an older
MySQL version in the unlikely case that the previous version worked
better than the new one.

It is always a good idea to make a backup beforehand, in case a
downgrade fails and leaves the instance in an unusable state.

To downgrade between General Availability (GA) status versions within
the same release series, typically you just install the new binaries on
top of the old ones and do not make any changes to the databases.

Downgrades between milestone releases (or from a GA release to a
milestone release) within the same release series are not supported and
you may encounter issues.

The following items form a checklist of things you should do whenever
you perform a downgrade:

   * Read the upgrading section for the release series from which you
     are downgrading to be sure that it does not have any features you
     really need. See *Note upgrading::.

   * If there is a downgrading section for that version, you should
     read that as well.

   * To see which new features were added between the version to which
     you are downgrading and your current version, see the Release
     Notes (http://dev.mysql.com/doc/relnotes/mysql/5.5/en/).

   * Check *Note checking-table-incompatibilities::, to see whether
     changes to table formats or to character sets or collations were
     made between your current version of MySQL and the version to
     which you are downgrading. If so and these changes result in an
     incompatibility between MySQL versions, you will need to downgrade
     the affected tables using the instructions in *Note
     rebuilding-tables::.

In most cases, you can move the MySQL format files and data files
between different GA versions on the same architecture as long as you
stay within versions for the same release series of MySQL.

If you downgrade from one release series to another, there may be
incompatibilities in table storage formats. In this case, use *Note
`mysqldump': mysqldump. to dump your tables before downgrading. After
downgrading, reload the dump file using *Note `mysql': mysql. or *Note
`mysqlimport': mysqlimport. to re-create your tables. For examples, see
*Note copying-databases::.

A typical symptom of a downward-incompatible table format change when
you downgrade is that you cannot open tables. In that case, use the
following procedure:

  1. Stop the older MySQL server that you are downgrading to.

  2. Restart the newer MySQL server you are downgrading from.

  3. Dump any tables that were inaccessible to the older server by
     using *Note `mysqldump': mysqldump. to create a dump file.

  4. Stop the newer MySQL server and restart the older one.

  5. Reload the dump file into the older server. Your tables should be
     accessible.

It might also be the case that system tables in the `mysql' database
have changed and that downgrading introduces some loss of functionality
or requires some adjustments. Here are some examples:

   * Trigger creation requires the `TRIGGER' privilege as of MySQL 5.1.
     In MySQL 5.0, there is no `TRIGGER' privilege and `SUPER' is
     required instead. If you downgrade from MySQL 5.1 to 5.0, you will
     need to give the `SUPER' privilege to those accounts that had the
     `TRIGGER' privilege in 5.1.

   * Triggers were added in MySQL 5.0, so if you downgrade from 5.0 to
     4.1, you cannot use triggers at all.

   * The `mysql.proc.comment' column definition changed between MySQL
     5.1 and 5.5. After a downgrade from 5.5 to 5.1, this table is seen
     as corrupt and in need of repair.  To workaround this problem,
     execute *Note `mysql_upgrade': mysql-upgrade. from the version of
     MySQL to which you downgraded.


File: manual.info,  Node: downgrading-to-previous-series,  Next: downgrading-from-enterprise,  Prev: downgrading,  Up: downgrading

2.12.2.1 Downgrading to MySQL 5.1
.................................

When downgrading to MySQL 5.1 from MySQL 5.5, you should keep in mind
the following issues relating to features found in MySQL 5.5, but not
in MySQL 5.1:

   * InnoDB

     MySQL 5.5 uses `InnoDB Plugin' as the built-in version of
     `InnoDB'. MySQL 5.1 includes `InnoDB Plugin' as of 5.1.38, but as
     an option that must be enabled explicitly. See the Release Notes
     (http://dev.mysql.com/doc/relnotes/mysql/5.5/en/) for MySQL 5.1.38.

   * Tables partitioned by `[LINEAR] KEY'

     MySQL 5.5 implements new functions used to calculate row placement
     for tables partitioned by `KEY' and `LINEAR KEY'. Tables that were
     created using `KEY' or `LINEAR KEY' partitioning in MySQL 5.5
     cannot be used by a MySQL 5.1 server. In MySQL 5.5.31 and later,
     you can downgrade such tables with `ALTER TABLE ... PARTITION BY
     ALGORITHM=1 [LINEAR] KEY (...)' to make them compatible with MySQL
     5.1.


File: manual.info,  Node: downgrading-from-enterprise,  Prev: downgrading-to-previous-series,  Up: downgrading

2.12.2.2 Downgrading from MySQL Enterprise Edition to MySQL Community Server
............................................................................

This section describes the steps required to downgrade from MySQL
Enterprise Edition to MySQL Community Edition. This can be done at any
time, and is required at the expiration of a MySQL Enterprise Edition
subscription if you wish to continue using MySQL Server.

When you perform such a downgrade, all commercially licensed components
of the MySQL Enterprise Edition subscription must be uninstalled. These
components and related considerations are described in the rest of this
section.

*Note*:

The issues described in this section are in addition to any that may be
encountered as a result of any upgrade or downgrade of the MySQL Server
version (such as between MySQL 5.5 and 5.1). Information about
upgrading and downgrading between MySQL release series can be found
elsewhere in this chapter; see *Note upgrading::, and *Note
downgrading::.

MySQL Enterprise Database Server

All commercial versions of MySQL Database Server must be uninstalled.

Commercially licensed extensions

All commercially licensed MySQL Enterprise Database Server extensions
must be uninstalled. This includes the following commercial extensions:

   * _MySQL External Authentication for Windows_: Following
     uninstallation of this plugin, existing MySQL user accounts must
     be re-created using local authentication. See *Note
     user-account-management::, for more information.

   * _MySQL External Authentication for PAM_: Following uninstallation
     of this plugin, existing MySQL user accounts must be re-created
     using local authentication. See *Note user-account-management::,
     for more information.

   * _MySQL Enterprise Scalability (Thread Pool)_: Following
     uninstallation of this plugin, existing MySQL servers revert to
     default thread and connection handling.

   * _MySQL Enterprise Audit_: Following uninstallation of this plugin,
     no logging of user logins or query activity occurs.

   * _MySQL High Availability_: Following uninstallation of this
     plugin, automated failover is no longer available.

MySQL Enterprise Backup

MySQL Enterprise Backup must be uninstalled. Uninstalling this
application has the effects listed here:

   * Automated backup scripts no longer work.

   * Existing backup images taken with MySQL Enterprise Backup can no
     longer be used for recovery.

   * Third-party integration with multimedia systems such as NetBackup,
     Tivoli, and Oracle Secure Backup no longer works.

MySQL Enterprise Monitor, MySQL Query Analyzer, agents

MySQL Enterprise Monitor, MySQL Query Analyzer, and all server-side
agents must be uninstalled. Uninstalling these applications and agents
has the following effects:

   * Automated SNMP and SMTP alerts no longer work.

   * All historical MySQL, OS monitoring, query, and performance
     metrics as well as all trending data are lost.

   * All environment-specific monitoring templates, custom advisors,
     graphs and scripts are also lost.


File: manual.info,  Node: checking-table-incompatibilities,  Next: rebuilding-tables,  Prev: downgrading,  Up: upgrading-downgrading

2.12.3 Checking Whether Tables or Indexes Must Be Rebuilt
---------------------------------------------------------

A binary upgrade or downgrade is one that installs one version of MySQL
`in place' over an existing version, without dumping and reloading
tables:

  1. Stop the server for the existing version if it is running.

  2. Install a different version of MySQL. This is an upgrade if the
     new version is higher than the original version, a downgrade if
     the version is lower.

  3. Start the server for the new version.

In many cases, the tables from the previous version of MySQL can be
used without problem by the new version. However, sometimes changes
occur that require tables or table indexes to be rebuilt, as described
in this section. If you have tables that are affected by any of the
issues described here, rebuild the tables or indexes as necessary using
the instructions given in *Note rebuilding-tables::.

* Table Incompatibilities *

After a binary upgrade to MySQL 5.1 from a MySQL 5.0 installation that
contains *Note `ARCHIVE': archive-storage-engine. tables, accessing
those tables causes the server to crash, even if you have run *Note
`mysql_upgrade': mysql-upgrade. or *Note `CHECK TABLE ... FOR UPGRADE':
check-table. To work around this problem, use *Note `mysqldump':
mysqldump. to dump all *Note `ARCHIVE': archive-storage-engine. tables
before upgrading, and reload them into MySQL 5.1 after upgrading. The
same problem occurs for binary downgrades from MySQL 5.1 to 5.0.

The upgrade problem is fixed in MySQL 5.6.4: The server can open *Note
`ARCHIVE': archive-storage-engine. tables created in MySQL 5.0.
However, it remains the recommended upgrade procedure to dump 5.0 *Note
`ARCHIVE': archive-storage-engine. tables before upgrading and reload
them after upgrading.

* Index Incompatibilities *

In MySQL 5.6.3, the length limit for index prefix keys is increased
from 767 bytes to 3072 bytes, for `InnoDB' tables using
`ROW_FORMAT=DYNAMIC' or `ROW_FORMAT=COMPRESSED'. See *Note
innodb-restrictions:: for details. This change is also backported to
MySQL 5.5.14. If you downgrade from one of these releases or higher, to
an earlier release with a lower length limit, the index prefix keys
could be truncated at 767 bytes or the downgrade could fail. This issue
could only occur if the configuration option `innodb_large_prefix' was
enabled on the server being downgraded.

If you perform a binary upgrade without dumping and reloading tables,
you cannot upgrade directly from MySQL 4.1 to 5.1 or higher. This
occurs due to an incompatible change in the `MyISAM' table index format
in MySQL 5.0. Upgrade from MySQL 4.1 to 5.0 and repair all `MyISAM'
tables. Then upgrade from MySQL 5.0 to 5.1 and check and repair your
tables.

Modifications to the handling of character sets or collations might
change the character sort order, which causes the ordering of entries
in any index that uses an affected character set or collation to be
incorrect. Such changes result in several possible problems:

   * Comparison results that differ from previous results

   * Inability to find some index values due to misordered index entries

   * Misordered `ORDER BY' results

   * Tables that *Note `CHECK TABLE': check-table. reports as being in
     need of repair

The solution to these problems is to rebuild any indexes that use an
affected character set or collation, either by dropping and re-creating
the indexes, or by dumping and reloading the entire table. In some
cases, it is possible to alter affected columns to use a different
collation. For information about rebuilding indexes, see *Note
rebuilding-tables::.

To check whether a table has indexes that must be rebuilt, consult the
following list. It indicates which versions of MySQL introduced
character set or collation changes that require indexes to be rebuilt.
Each entry indicates the version in which the change occurred and the
character sets or collations that the change affects. If the change is
associated with a particular bug report, the bug number is given.

The list applies both for binary upgrades and downgrades. For example,
Bug #27877 was fixed in MySQL 5.1.24, so it applies to upgrades from
versions older than 5.1.24 to 5.1.24 or newer, and to downgrades from
5.1.24 or newer to versions older than 5.1.24.

In many cases, you can use *Note `CHECK TABLE ... FOR UPGRADE':
check-table. to identify tables for which index rebuilding is required.
It will report this message:

     Table upgrade required.
     Please do "REPAIR TABLE `tbl_name`" or dump/reload to fix it!

In these cases, you can also use *Note `mysqlcheck --check-upgrade':
mysqlcheck. or *Note `mysql_upgrade': mysql-upgrade, which execute
*Note `CHECK TABLE': check-table. However, the use of *Note `CHECK
TABLE': check-table. applies only after upgrades, not downgrades. Also,
*Note `CHECK TABLE': check-table. is not applicable to all storage
engines. For details about which storage engines *Note `CHECK TABLE':
check-table. supports, see *Note check-table::.

These changes cause index rebuilding to be necessary:

   * MySQL 5.1.24 (Bug #27877)

     Affects indexes that use the `utf8_general_ci' or
     `ucs2_general_ci' collation for columns that contain `'ss'' LATIN
     SMALL LETTER SHARP S (German). The bug fix corrected an error in
     the original collations but introduced an incompatibility such that
     `'ss'' compares equal to characters with which it previously
     compared different.

     Affected tables can be detected by *Note `CHECK TABLE ... FOR
     UPGRADE': check-table. as of MySQL 5.1.30 (see Bug #40053).

     A workaround for this issue is implemented as of MySQL 5.1.62,
     5.5.21, and 5.6.5. The workaround involves altering affected
     columns to use the `utf8_general_mysql500_ci' and
     `ucs2_general_mysql500_ci' collations, which preserve the original
     pre-5.1.24 ordering of `utf8_general_ci' and `ucs2_general_ci'.

   * MySQL 5.0.48, 5.1.23 (Bug #27562)

     Affects indexes that use the `ascii_general_ci' collation for
     columns that contain any of these characters: `'`'' GRAVE ACCENT,
     `'['' LEFT SQUARE BRACKET, `'\'' REVERSE SOLIDUS, `']'' RIGHT
     SQUARE BRACKET, `'~'' TILDE

     Affected tables can be detected by *Note `CHECK TABLE ... FOR
     UPGRADE': check-table. as of MySQL 5.1.29 (see Bug #39585).

   * MySQL 5.0.48, 5.1.21 (Bug #29461)

     Affects indexes for columns that use any of these character sets:
     `eucjpms', `euc_kr', `gb2312', `latin7', `macce', `ujis'

     Affected tables can be detected by *Note `CHECK TABLE ... FOR
     UPGRADE': check-table. as of MySQL 5.1.29 (see Bug #39585).


File: manual.info,  Node: rebuilding-tables,  Next: copying-databases,  Prev: checking-table-incompatibilities,  Up: upgrading-downgrading

2.12.4 Rebuilding or Repairing Tables or Indexes
------------------------------------------------

This section describes how to rebuild a table. This can be necessitated
by changes to MySQL such as how data types are handled or changes to
character set handling. For example, an error in a collation might have
been corrected, necessitating a table rebuild to update the indexes for
character columns that use the collation. (For examples, see *Note
checking-table-incompatibilities::.) It might also be that a table
repair or upgrade should be done as indicated by a table check
operation such as that performed by `CHECK TABLE', *Note `mysqlcheck':
mysqlcheck, or *Note `mysql_upgrade': mysql-upgrade.

Methods for rebuilding a table include dumping and reloading it, or
using *Note `ALTER TABLE': alter-table. or *Note `REPAIR TABLE':
repair-table.

*Note*:

If you are rebuilding tables because a different version of MySQL will
not handle them after a binary (in-place) upgrade or downgrade, you
must use the dump-and-reload method. Dump the tables _before_ upgrading
or downgrading using your original version of MySQL. Then reload the
tables _after_ upgrading or downgrading.

If you use the dump-and-reload method of rebuilding tables only for the
purpose of rebuilding indexes, you can perform the dump either before
or after upgrading or downgrading. Reloading still must be done
afterward.

To rebuild a table by dumping and reloading it, use *Note `mysqldump':
mysqldump. to create a dump file and *Note `mysql': mysql. to reload
the file:

     shell> mysqldump DB_NAME t1 > dump.sql
     shell> mysql DB_NAME < dump.sql

To rebuild all the tables in a single database, specify the database
name without any following table name:

     shell> mysqldump DB_NAME > dump.sql
     shell> mysql DB_NAME < dump.sql

To rebuild all tables in all databases, use the `--all-databases'
option:

     shell> mysqldump --all-databases > dump.sql
     shell> mysql < dump.sql

To rebuild a table with *Note `ALTER TABLE': alter-table, use a `null'
alteration; that is, an *Note `ALTER TABLE': alter-table. statement that
`changes' the table to use the storage engine that it already has. For
example, if `t1' is a `MyISAM' table, use this statement:

     mysql> ALTER TABLE t1 ENGINE = MyISAM;

If you are not sure which storage engine to specify in the *Note `ALTER
TABLE': alter-table. statement, use *Note `SHOW CREATE TABLE':
show-create-table. to display the table definition.

If you must rebuild a table because a table checking operation
indicates that the table is corrupt or needs an upgrade, you can use
*Note `REPAIR TABLE': repair-table. if that statement supports the
table's storage engine. For example, to repair a `MyISAM' table, use
this statement:

     mysql> REPAIR TABLE t1;

For storage engines such as `InnoDB' that *Note `REPAIR TABLE':
repair-table. does not support, use *Note `mysqldump': mysqldump. to
create a dump file and *Note `mysql': mysql. to reload the file, as
described earlier.

For specifics about which storage engines *Note `REPAIR TABLE':
repair-table. supports, see *Note repair-table::.

*Note `mysqlcheck --repair': mysqlcheck. provides command-line access
to the *Note `REPAIR TABLE': repair-table.  statement. This can be a
more convenient means of repairing tables because you can use the
`--databases' or `--all-databases' option to repair all tables in
specific databases or all databases, respectively:

     shell> mysqlcheck --repair --databases DB_NAME ...
     shell> mysqlcheck --repair --all-databases

For incompatibilities introduced in MySQL 5.1.24 by the fix for Bug
#27877 that corrected the `utf8_general_ci' and `ucs2_general_ci'
collations, a workaround is implemented as of MySQL 5.1.62, 5.5.21, and
5.6.5. Upgrade to one of those versions, then convert each affected
table using one of the following methods. In each case, the workaround
altering affected columns to use the `utf8_general_mysql500_ci' and
`ucs2_general_mysql500_ci' collations, which preserve the original
pre-5.1.24 ordering of `utf8_general_ci' and `ucs2_general_ci'.

   * To convert an affected table after a binary upgrade that leaves
     the table files in place, alter the table to use the new
     collation. Suppose that the table `t1' contains one or more
     problematic `utf8' columns. To convert the table at the table
     level, use a statement like this:

          ALTER TABLE t1
          CONVERT TO CHARACTER SET utf8 COLLATE utf8_general_mysql500_ci;

     To apply the change on a column-specific basis, use a statement
     like this (be sure to repeat the column definition as originally
     specified except for the `COLLATE' clause):

          ALTER TABLE t1
          MODIFY c1 CHAR(N) CHARACTER SET utf8 COLLATE utf8_general_mysql500_ci;

   * To upgrade the table using a dump and reload procedure, dump the
     table using *Note `mysqldump': mysqldump, modify the *Note `CREATE
     TABLE': create-table. statement in the dump file to use the new
     collation, and reload the table.

After making the appropriate changes, *Note `CHECK TABLE': check-table.
should report no error.


File: manual.info,  Node: copying-databases,  Prev: rebuilding-tables,  Up: upgrading-downgrading

2.12.5 Copying MySQL Databases to Another Machine
-------------------------------------------------

You can copy the `.frm', `.MYI', and `.MYD' files for `MyISAM' tables
between different architectures that support the same floating-point
format. (MySQL takes care of any byte-swapping issues.) See *Note
myisam-storage-engine::.

In cases where you need to transfer databases between different
architectures, you can use *Note `mysqldump': mysqldump. to create a
file containing SQL statements. You can then transfer the file to the
other machine and feed it as input to the *Note `mysql': mysql. client.

Use *Note `mysqldump --help': mysqldump. to see what options are
available.

The easiest (although not the fastest) way to move a database between
two machines is to run the following commands on the machine on which
the database is located:

     shell> mysqladmin -h 'OTHER_HOSTNAME' create DB_NAME
     shell> mysqldump DB_NAME | mysql -h 'OTHER_HOSTNAME' DB_NAME

If you want to copy a database from a remote machine over a slow
network, you can use these commands:

     shell> mysqladmin create DB_NAME
     shell> mysqldump -h 'OTHER_HOSTNAME' --compress DB_NAME | mysql DB_NAME

You can also store the dump in a file, transfer the file to the target
machine, and then load the file into the database there.  For example,
you can dump a database to a compressed file on the source machine like
this:

     shell> mysqldump --quick DB_NAME | gzip > DB_NAME.gz

Transfer the file containing the database contents to the target
machine and run these commands there:

     shell> mysqladmin create DB_NAME
     shell> gunzip < DB_NAME.gz | mysql DB_NAME

You can also use *Note `mysqldump': mysqldump. and *Note `mysqlimport':
mysqlimport. to transfer the database. For large tables, this is much
faster than simply using *Note `mysqldump': mysqldump. In the following
commands, DUMPDIR represents the full path name of the directory you
use to store the output from *Note `mysqldump': mysqldump.

First, create the directory for the output files and dump the database:

     shell> mkdir DUMPDIR
     shell> mysqldump --tab=DUMPDIR DB_NAME

Then transfer the files in the DUMPDIR directory to some corresponding
directory on the target machine and load the files into MySQL there:

     shell> mysqladmin create DB_NAME           # create database
     shell> cat DUMPDIR/*.sql | mysql DB_NAME   # create tables in database
     shell> mysqlimport DB_NAME DUMPDIR/*.txt   # load data into tables

Do not forget to copy the `mysql' database because that is where the
grant tables are stored. You might have to run commands as the MySQL
`root' user on the new machine until you have the `mysql' database in
place.

After you import the `mysql' database on the new machine, execute *Note
`mysqladmin flush-privileges': mysqladmin. so that the server reloads
the grant table information.


File: manual.info,  Node: environment-variables,  Next: perl-support,  Prev: upgrading-downgrading,  Up: installing

2.13 Environment Variables
==========================

This section lists all the environment variables that are used directly
or indirectly by MySQL. Most of these can also be found in other places
in this manual.

Note that any options on the command line take precedence over values
specified in option files and environment variables, and values in
option files take precedence over values in environment variables.

In many cases, it is preferable to use an option file instead of
environment variables to modify the behavior of MySQL. See *Note
option-files::.

This table describes all the environment variables that are used
directly or indirectly by MySQL.

Variable           Description
`CXX'              The name of your C++ compiler (for running `CMake').
`CC'               The name of your C compiler (for running `CMake').
`CFLAGS'           Flags for your C compiler (for running `CMake').
`CXXFLAGS'         Flags for your C++ compiler (for running `CMake').
`DBI_USER'         The default user name for Perl DBI.
`DBI_TRACE'        Trace options for Perl DBI.
`HOME'             The default path for the *Note `mysql': mysql.
                   history file is `$HOME/.mysql_history'.
`LD_RUN_PATH'      Used to specify the location of `libmysqlclient.so'.
`LIBMYSQL_ENABLE_CLEARTEXT_PLUGIN'Enable `mysql_clear_password' authentication plugin;
                   see *Note cleartext-authentication-plugin::.
`MYSQL_DEBUG'      Debug trace options when debugging.
`MYSQL_GROUP_SUFFIX'Option group suffix value (like specifying
                   `--defaults-group-suffix').
`MYSQL_HISTFILE'   The path to the *Note `mysql': mysql. history file.
                   If this variable is set, its value overrides the
                   default for `$HOME/.mysql_history'.
`MYSQL_HOME'       The path to the directory in which the server-specific
                   `my.cnf' file resides.
`MYSQL_HOST'       The default host name used by the *Note `mysql':
                   mysql. command-line client.
`MYSQL_PS1'        The command prompt to use in the *Note `mysql':
                   mysql. command-line client.
`MYSQL_PWD'        The default password when connecting to *Note
                   `mysqld': mysqld. Note that using this is insecure.
                   See *Note password-security-user::.
`MYSQL_TCP_PORT'   The default TCP/IP port number.
`MYSQL_UNIX_PORT'  The default Unix socket file name; used for
                   connections to `localhost'.
`PATH'             Used by the shell to find MySQL programs.
`TMPDIR'           The directory where temporary files are created.
`TZ'               This should be set to your local time zone. See *Note
                   timezone-problems::.
`UMASK'            The user-file creation mode when creating files. See
                   note following table.
`UMASK_DIR'        The user-directory creation mode when creating
                   directories. See note following table.
`USER'             The default user name on Windows when connecting to
                   *Note `mysqld': mysqld.

For information about the *Note `mysql': mysql. history file, see *Note
mysql-logging::.

The `UMASK' and `UMASK_DIR' variables, despite their names, are used as
modes, not masks:

   * If `UMASK' is set, *Note `mysqld': mysqld.  uses `($UMASK | 0600)'
     as the mode for file creation, so that newly created files have a
     mode in the range from 0600 to 0666 (all values octal).

   * If `UMASK_DIR' is set, *Note `mysqld': mysqld. uses `($UMASK_DIR |
     0700)' as the base mode for directory creation, which then is
     AND-ed with `~(~$UMASK & 0666)', so that newly created directories
     have a mode in the range from 0700 to 0777 (all values octal). The
     AND operation may remove read and write permissions from the
     directory mode, but not execute permissions.

MySQL assumes that the value for `UMASK' or `UMASK_DIR' is in octal if
it starts with a zero.


File: manual.info,  Node: perl-support,  Prev: environment-variables,  Up: installing

2.14 Perl Installation Notes
============================

* Menu:

* perl-installation::            Installing Perl on Unix
* activestate-perl::             Installing ActiveState Perl on Windows
* perl-support-problems::        Problems Using the Perl `DBI'/`DBD' Interface

The Perl `DBI' module provides a generic interface for database access.
You can write a `DBI' script that works with many different database
engines without change. To use `DBI', you must install the `DBI'
module, as well as a DataBase Driver (DBD) module for each type of
database server you want to access. For MySQL, this driver is the
`DBD::mysql' module.

Perl, and the `DBD::MySQL' module for `DBI' must be installed if you
want to run the MySQL benchmark scripts; see *Note mysql-benchmarks::.
They are also required for the MySQL Cluster *Note `ndb_size.pl':
mysql-cluster-programs-ndb-size-pl. utility; see *Note
mysql-cluster-programs-ndb-size-pl::.

*Note*:

Perl support is not included with MySQL distributions. You can obtain
the necessary modules from `http://search.cpan.org' for Unix, or by
using the ActiveState `ppm' program on Windows. The following sections
describe how to do this.

The `DBI'/`DBD' interface requires Perl 5.6.0, and 5.6.1 or later is
preferred. DBI _does not work_ if you have an older version of Perl.
You should use `DBD::mysql' 4.009 or higher. Although earlier versions
are available, they do not support the full functionality of MySQL 5.5.


File: manual.info,  Node: perl-installation,  Next: activestate-perl,  Prev: perl-support,  Up: perl-support

2.14.1 Installing Perl on Unix
------------------------------

MySQL Perl support requires that you have installed MySQL client
programming support (libraries and header files). Most installation
methods install the necessary files. If you install MySQL from RPM
files on Linux, be sure to install the developer RPM as well. The
client programs are in the client RPM, but client programming support
is in the developer RPM.

The files you need for Perl support can be obtained from the CPAN
(Comprehensive Perl Archive Network) at `http://search.cpan.org'.

The easiest way to install Perl modules on Unix is to use the `CPAN'
module. For example:

     shell> perl -MCPAN -e shell
     cpan> install DBI
     cpan> install DBD::mysql

The `DBD::mysql' installation runs a number of tests. These tests
attempt to connect to the local MySQL server using the default user
name and password. (The default user name is your login name on Unix,
and `ODBC' on Windows. The default password is `no password.') If you
cannot connect to the server with those values (for example, if your
account has a password), the tests fail. You can use `force install
DBD::mysql' to ignore the failed tests.

`DBI' requires the `Data::Dumper' module. It may be installed; if not,
you should install it before installing `DBI'.

It is also possible to download the module distributions in the form of
compressed `tar' archives and build the modules manually. For example,
to unpack and build a DBI distribution, use a procedure such as this:

  1. Unpack the distribution into the current directory:

          shell> gunzip < DBI-VERSION.tar.gz | tar xvf -

     This command creates a directory named `DBI-VERSION'.

  2. Change location into the top-level directory of the unpacked
     distribution:

          shell> cd DBI-VERSION

  3. Build the distribution and compile everything:

          shell> perl Makefile.PL
          shell> make
          shell> make test
          shell> make install

The `make test' command is important because it verifies that the
module is working. Note that when you run that command during the
`DBD::mysql' installation to exercise the interface code, the MySQL
server must be running or the test fails.

It is a good idea to rebuild and reinstall the `DBD::mysql'
distribution whenever you install a new release of MySQL. This ensures
that the latest versions of the MySQL client libraries are installed
correctly.

If you do not have access rights to install Perl modules in the system
directory or if you want to install local Perl modules, the following
reference may be useful:
`http://servers.digitaldaze.com/extensions/perl/modules.html#modules'

Look under the heading `Installing New Modules that Require Locally
Installed Modules.'


File: manual.info,  Node: activestate-perl,  Next: perl-support-problems,  Prev: perl-installation,  Up: perl-support

2.14.2 Installing ActiveState Perl on Windows
---------------------------------------------

On Windows, you should do the following to install the MySQL `DBD'
module with ActiveState Perl:

  1. Get ActiveState Perl from
     `http://www.activestate.com/Products/ActivePerl/' and install it.

  2. Open a console window.

  3. If necessary, set the `HTTP_proxy' variable.  For example, you
     might try a setting like this:

          C:\> set HTTP_proxy=my.proxy.com:3128

  4. Start the PPM program:

          C:\> C:\perl\bin\ppm.pl

  5. If you have not previously done so, install `DBI':

          ppm> install DBI

  6. If this succeeds, run the following command:

          ppm> install DBD-mysql

This procedure should work with ActiveState Perl 5.6 or newer.

If you cannot get the procedure to work, you should install the ODBC
driver instead and connect to the MySQL server through ODBC:

     use DBI;
     $dbh= DBI->connect("DBI:ODBC:$dsn",$user,$password) ||
       die "Got error $DBI::errstr when connecting to $dsn\n";


File: manual.info,  Node: perl-support-problems,  Prev: activestate-perl,  Up: perl-support

2.14.3 Problems Using the Perl `DBI'/`DBD' Interface
----------------------------------------------------

If Perl reports that it cannot find the `../mysql/mysql.so' module, the
problem is probably that Perl cannot locate the `libmysqlclient.so'
shared library. You should be able to fix this problem by one of the
following methods:

   * Copy `libmysqlclient.so' to the directory where your other shared
     libraries are located (probably `/usr/lib' or `/lib').

   * Modify the `-L' options used to compile `DBD::mysql' to reflect
     the actual location of `libmysqlclient.so'.

   * On Linux, you can add the path name of the directory where
     `libmysqlclient.so' is located to the `/etc/ld.so.conf' file.

   * Add the path name of the directory where `libmysqlclient.so' is
     located to the `LD_RUN_PATH' environment variable. Some systems
     use `LD_LIBRARY_PATH' instead.

Note that you may also need to modify the `-L' options if there are
other libraries that the linker fails to find. For example, if the
linker cannot find `libc' because it is in `/lib' and the link command
specifies `-L/usr/lib', change the `-L' option to `-L/lib' or add
`-L/lib' to the existing link command.

If you get the following errors from `DBD::mysql', you are probably
using `gcc' (or using an old binary compiled with `gcc'):

     /usr/bin/perl: can't resolve symbol '__moddi3'
     /usr/bin/perl: can't resolve symbol '__divdi3'

Add `-L/usr/lib/gcc-lib/... -lgcc' to the link command when the
`mysql.so' library gets built (check the output from `make' for
`mysql.so' when you compile the Perl client).  The `-L' option should
specify the path name of the directory where `libgcc.a' is located on
your system.

Another cause of this problem may be that Perl and MySQL are not both
compiled with `gcc'. In this case, you can solve the mismatch by
compiling both with `gcc'.


File: manual.info,  Node: tutorial,  Next: programs,  Prev: installing,  Up: Top

3 Tutorial
**********

* Menu:

* connecting-disconnecting::     Connecting to and Disconnecting from the Server
* entering-queries::             Entering Queries
* database-use::                 Creating and Using a Database
* getting-information::          Getting Information About Databases and Tables
* batch-mode::                   Using `mysql' in Batch Mode
* examples::                     Examples of Common Queries
* apache::                       Using MySQL with Apache

This chapter provides a tutorial introduction to MySQL by showing how
to use the *Note `mysql': mysql. client program to create and use a
simple database. *Note `mysql': mysql. (sometimes referred to as the
`terminal monitor' or just `monitor') is an interactive program that
enables you to connect to a MySQL server, run queries, and view the
results.  *Note `mysql': mysql. may also be used in batch mode: you
place your queries in a file beforehand, then tell *Note `mysql':
mysql. to execute the contents of the file. Both ways of using *Note
`mysql': mysql. are covered here.

To see a list of options provided by *Note `mysql': mysql, invoke it
with the `--help' option:

     shell> mysql --help

This chapter assumes that *Note `mysql': mysql. is installed on your
machine and that a MySQL server is available to which you can connect.
If this is not true, contact your MySQL administrator. (If _you_ are
the administrator, you need to consult the relevant portions of this
manual, such as *Note server-administration::.)

This chapter describes the entire process of setting up and using a
database. If you are interested only in accessing an existing database,
you may want to skip over the sections that describe how to create the
database and the tables it contains.

Because this chapter is tutorial in nature, many details are
necessarily omitted. Consult the relevant sections of the manual for
more information on the topics covered here.


File: manual.info,  Node: connecting-disconnecting,  Next: entering-queries,  Prev: tutorial,  Up: tutorial

3.1 Connecting to and Disconnecting from the Server
===================================================

To connect to the server, you will usually need to provide a MySQL user
name when you invoke *Note `mysql': mysql. and, most likely, a
password. If the server runs on a machine other than the one where you
log in, you will also need to specify a host name.  Contact your
administrator to find out what connection parameters you should use to
connect (that is, what host, user name, and password to use). Once you
know the proper parameters, you should be able to connect like this:

     shell> mysql -h HOST -u USER -p
     Enter password: ********

`host' and `user' represent the host name where your MySQL server is
running and the user name of your MySQL account. Substitute appropriate
values for your setup.  The `********' represents your password; enter
it when *Note `mysql': mysql. displays the `Enter password:' prompt.

If that works, you should see some introductory information followed by
a `mysql>' prompt:

     shell> mysql -h HOST -u USER -p
     Enter password: ********
     Welcome to the MySQL monitor.  Commands end with ; or \g.
     Your MySQL connection id is 25338 to server version: 5.5.35-standard

     Type 'help;' or '\h' for help. Type '\c' to clear the buffer.

     mysql>

The `mysql>' prompt tells you that *Note `mysql': mysql. is ready for
you to enter commands.

If you are logging in on the same machine that MySQL is running on, you
can omit the host, and simply use the following:

     shell> mysql -u USER -p

If, when you attempt to log in, you get an error message such as `ERROR
2002 (HY000): Can't connect to local MySQL server through socket
'/tmp/mysql.sock' (2)', it means that the MySQL server daemon (Unix) or
service (Windows) is not running. Consult the administrator or see the
section of *Note installing:: that is appropriate to your operating
system.

For help with other problems often encountered when trying to log in,
see *Note common-errors::.

Some MySQL installations permit users to connect as the anonymous
(unnamed) user to the server running on the local host. If this is the
case on your machine, you should be able to connect to that server by
invoking *Note `mysql': mysql. without any options:

     shell> mysql

After you have connected successfully, you can disconnect any time by
typing `QUIT' (or `\q') at the `mysql>' prompt:

     mysql> QUIT
     Bye

On Unix, you can also disconnect by pressing Control+D.

Most examples in the following sections assume that you are connected
to the server. They indicate this by the `mysql>' prompt.


File: manual.info,  Node: entering-queries,  Next: database-use,  Prev: connecting-disconnecting,  Up: tutorial

3.2 Entering Queries
====================

Make sure that you are connected to the server, as discussed in the
previous section. Doing so does not in itself select any database to
work with, but that is okay. At this point, it is more important to
find out a little about how to issue queries than to jump right in
creating tables, loading data into them, and retrieving data from them.
This section describes the basic principles of entering commands, using
several queries you can try out to familiarize yourself with how *Note
`mysql': mysql.  works.

Here is a simple command that asks the server to tell you its version
number and the current date. Type it in as shown here following the
`mysql>' prompt and press Enter:

     mysql> SELECT VERSION(), CURRENT_DATE;
     +--------------+--------------+
     | VERSION()    | CURRENT_DATE |
     +--------------+--------------+
     | 5.5.0-m2-log | 2009-05-04   |
     +--------------+--------------+
     1 row in set (0.01 sec)
     mysql>

This query illustrates several things about *Note `mysql': mysql.:

   * A command normally consists of an SQL statement followed by a
     semicolon. (There are some exceptions where a semicolon may be
     omitted. `QUIT', mentioned earlier, is one of them. We'll get to
     others later.)

   * When you issue a command, *Note `mysql': mysql. sends it to the
     server for execution and displays the results, then prints another
     `mysql>' prompt to indicate that it is ready for another command.

   * *Note `mysql': mysql. displays query output in tabular form (rows
     and columns). The first row contains labels for the columns. The
     rows following are the query results. Normally, column labels are
     the names of the columns you fetch from database tables. If you're
     retrieving the value of an expression rather than a table column
     (as in the example just shown), *Note `mysql': mysql. labels the
     column using the expression itself.

   * *Note `mysql': mysql. shows how many rows were returned and how
     long the query took to execute, which gives you a rough idea of
     server performance. These values are imprecise because they
     represent wall clock time (not CPU or machine time), and because
     they are affected by factors such as server load and network
     latency. (For brevity, the `rows in set' line is sometimes not
     shown in the remaining examples in this chapter.)

Keywords may be entered in any lettercase. The following queries are
equivalent:

     mysql> SELECT VERSION(), CURRENT_DATE;
     mysql> select version(), current_date;
     mysql> SeLeCt vErSiOn(), current_DATE;

Here is another query. It demonstrates that you can use *Note `mysql':
mysql. as a simple calculator:

     mysql> SELECT SIN(PI()/4), (4+1)*5;
     +------------------+---------+
     | SIN(PI()/4)      | (4+1)*5 |
     +------------------+---------+
     | 0.70710678118655 |      25 |
     +------------------+---------+
     1 row in set (0.02 sec)

The queries shown thus far have been relatively short, single-line
statements. You can even enter multiple statements on a single line.
Just end each one with a semicolon:

     mysql> SELECT VERSION(); SELECT NOW();
     +--------------+
     | VERSION()    |
     +--------------+
     | 5.5.0-m2-log |
     +--------------+
     1 row in set (0.00 sec)

     +---------------------+
     | NOW()               |
     +---------------------+
     | 2009-05-04 15:15:00 |
     +---------------------+
     1 row in set (0.00 sec)

A command need not be given all on a single line, so lengthy commands
that require several lines are not a problem.  *Note `mysql': mysql.
determines where your statement ends by looking for the terminating
semicolon, not by looking for the end of the input line. (In other
words, *Note `mysql': mysql.  accepts free-format input: it collects
input lines but does not execute them until it sees the semicolon.)

Here is a simple multiple-line statement:

     mysql> SELECT
         -> USER()
         -> ,
         -> CURRENT_DATE;
     +---------------+--------------+
     | USER()        | CURRENT_DATE |
     +---------------+--------------+
     | jon@localhost | 2005-10-11   |
     +---------------+--------------+

In this example, notice how the prompt changes from `mysql>' to `->'
after you enter the first line of a multiple-line query. This is how
*Note `mysql': mysql. indicates that it has not yet seen a complete
statement and is waiting for the rest. The prompt is your friend,
because it provides valuable feedback. If you use that feedback, you
can always be aware of what *Note `mysql': mysql.  is waiting for.

If you decide you do not want to execute a command that you are in the
process of entering, cancel it by typing `\c':

     mysql> SELECT
         -> USER()
         -> \c
     mysql>

Here, too, notice the prompt. It switches back to `mysql>' after you
type `\c', providing feedback to indicate that *Note `mysql': mysql. is
ready for a new command.

The following table shows each of the prompts you may see and
summarizes what they mean about the state that *Note `mysql': mysql. is
in.

This table lists MySQL prompts and describes the meaning of each.

Prompt  Meaning
`mysql>'Ready for new command.
`->'    Waiting for next line of multiple-line command.
`'>'    Waiting for next line, waiting for completion of a string
        that began with a single quote (``''').
`">'    Waiting for next line, waiting for completion of a string
        that began with a double quote (``"'').
``>'    Waiting for next line, waiting for completion of an
        identifier that began with a backtick (```'').
`/*>'   Waiting for next line, waiting for completion of a
        comment that began with `/*'.

Multiple-line statements commonly occur by accident when you intend to
issue a command on a single line, but forget the terminating semicolon.
In this case, *Note `mysql': mysql.  waits for more input:

     mysql> SELECT USER()
         ->

If this happens to you (you think you've entered a statement but the
only response is a `->' prompt), most likely *Note `mysql': mysql. is
waiting for the semicolon. If you don't notice what the prompt is
telling you, you might sit there for a while before realizing what you
need to do. Enter a semicolon to complete the statement, and *Note
`mysql': mysql.  executes it:

     mysql> SELECT USER()
         -> ;
     +---------------+
     | USER()        |
     +---------------+
     | jon@localhost |
     +---------------+

The `'>' and `">' prompts occur during string collection (another way
of saying that MySQL is waiting for completion of a string). In MySQL,
you can write strings surrounded by either ``''' or ``"'' characters
(for example, `'hello'' or `"goodbye"'), and *Note `mysql': mysql. lets
you enter strings that span multiple lines. When you see a `'>' or `">'
prompt, it means that you have entered a line containing a string that
begins with a ``''' or ``"'' quote character, but have not yet entered
the matching quote that terminates the string. This often indicates
that you have inadvertently left out a quote character. For example:

     mysql> SELECT * FROM my_table WHERE name = 'Smith AND age < 30;
         '>

If you enter this *Note `SELECT': select. statement, then press `Enter'
and wait for the result, nothing happens. Instead of wondering why this
query takes so long, notice the clue provided by the `'>' prompt. It
tells you that *Note `mysql': mysql. expects to see the rest of an
unterminated string. (Do you see the error in the statement? The string
`'Smith' is missing the second single quotation mark.)

At this point, what do you do? The simplest thing is to cancel the
command. However, you cannot just type `\c' in this case, because *Note
`mysql': mysql. interprets it as part of the string that it is
collecting. Instead, enter the closing quote character (so *Note
`mysql': mysql. knows you've finished the string), then type `\c':

     mysql> SELECT * FROM my_table WHERE name = 'Smith AND age < 30;
         '> '\c
     mysql>

The prompt changes back to `mysql>', indicating that *Note `mysql':
mysql. is ready for a new command.

The ``>' prompt is similar to the `'>' and `">' prompts, but indicates
that you have begun but not completed a backtick-quoted identifier.

It is important to know what the `'>', `">', and ``>' prompts signify,
because if you mistakenly enter an unterminated string, any further
lines you type appear to be ignored by *Note `mysql': mysql.--including
a line containing `QUIT'. This can be quite confusing, especially if
you do not know that you need to supply the terminating quote before
you can cancel the current command.


File: manual.info,  Node: database-use,  Next: getting-information,  Prev: entering-queries,  Up: tutorial

3.3 Creating and Using a Database
=================================

* Menu:

* creating-database::            Creating and Selecting a Database
* creating-tables::              Creating a Table
* loading-tables::               Loading Data into a Table
* retrieving-data::              Retrieving Information from a Table

Once you know how to enter commands, you are ready to access a database.

Suppose that you have several pets in your home (your menagerie) and
you would like to keep track of various types of information about
them. You can do so by creating tables to hold your data and loading
them with the desired information. Then you can answer different sorts
of questions about your animals by retrieving data from the tables.
This section shows you how to perform the following operations:

   * Create a database

   * Create a table

   * Load data into the table

   * Retrieve data from the table in various ways

   * Use multiple tables

The menagerie database is simple (deliberately), but it is not
difficult to think of real-world situations in which a similar type of
database might be used. For example, a database like this could be used
by a farmer to keep track of livestock, or by a veterinarian to keep
track of patient records. A menagerie distribution containing some of
the queries and sample data used in the following sections can be
obtained from the MySQL Web site.  It is available in both compressed
`tar' file and Zip formats at `http://dev.mysql.com/doc/'.

Use the *Note `SHOW': show. statement to find out what databases
currently exist on the server:

     mysql> SHOW DATABASES;
     +----------+
     | Database |
     +----------+
     | mysql    |
     | test     |
     | tmp      |
     +----------+

The `mysql' database describes user access privileges. The `test'
database often is available as a workspace for users to try things out.

The list of databases displayed by the statement may be different on
your machine; *Note `SHOW DATABASES': show-databases.  does not show
databases that you have no privileges for if you do not have the *Note
`SHOW DATABASES': show-databases.  privilege. See *Note
show-databases::.

If the `test' database exists, try to access it:

     mysql> USE test
     Database changed

*Note `USE': use, like `QUIT', does not require a semicolon. (You can
terminate such statements with a semicolon if you like; it does no
harm.) The *Note `USE': use. statement is special in another way, too:
it must be given on a single line.

You can use the `test' database (if you have access to it) for the
examples that follow, but anything you create in that database can be
removed by anyone else with access to it. For this reason, you should
probably ask your MySQL administrator for permission to use a database
of your own.  Suppose that you want to call yours `menagerie'.  The
administrator needs to execute a command like this:

     mysql> GRANT ALL ON menagerie.* TO 'your_mysql_name'@'your_client_host';

where `your_mysql_name' is the MySQL user name assigned to you and
`your_client_host' is the host from which you connect to the server.


File: manual.info,  Node: creating-database,  Next: creating-tables,  Prev: database-use,  Up: database-use

3.3.1 Creating and Selecting a Database
---------------------------------------

If the administrator creates your database for you when setting up your
permissions, you can begin using it. Otherwise, you need to create it
yourself:

     mysql> CREATE DATABASE menagerie;

Under Unix, database names are case sensitive (unlike SQL keywords), so
you must always refer to your database as `menagerie', not as
`Menagerie', `MENAGERIE', or some other variant. This is also true for
table names. (Under Windows, this restriction does not apply, although
you must refer to databases and tables using the same lettercase
throughout a given query. However, for a variety of reasons, the
recommended best practice is always to use the same lettercase that was
used when the database was created.)

*Note*:

If you get an error such as `ERROR 1044 (42000): Access denied for user
'monty'@'localhost' to database 'menagerie'' when attempting to create
a database, this means that your user account does not have the
necessary privileges to do so. Discuss this with the administrator or
see *Note privilege-system::.

Creating a database does not select it for use; you must do that
explicitly. To make `menagerie' the current database, use this command:

     mysql> USE menagerie
     Database changed

Your database needs to be created only once, but you must select it for
use each time you begin a *Note `mysql': mysql.  session. You can do
this by issuing a *Note `USE': use. statement as shown in the example.
Alternatively, you can select the database on the command line when you
invoke *Note `mysql': mysql. Just specify its name after any connection
parameters that you might need to provide. For example:

     shell> mysql -h HOST -u USER -p menagerie
     Enter password: ********

*Important*:

`menagerie' in the command just shown is *not* your password. If you
want to supply your password on the command line after the `-p' option,
you must do so with no intervening space (for example, as
`-pmypassword', not as `-p mypassword'). However, putting your password
on the command line is not recommended, because doing so exposes it to
snooping by other users logged in on your machine.

*Note*:

You can see at any time which database is currently selected using
*Note `SELECT': select.  `DATABASE()'.


File: manual.info,  Node: creating-tables,  Next: loading-tables,  Prev: creating-database,  Up: database-use

3.3.2 Creating a Table
----------------------

Creating the database is the easy part, but at this point it is empty,
as *Note `SHOW TABLES': show-tables. tells you:

     mysql> SHOW TABLES;
     Empty set (0.00 sec)

The harder part is deciding what the structure of your database should
be: what tables you need and what columns should be in each of them.

You want a table that contains a record for each of your pets.  This
can be called the `pet' table, and it should contain, as a bare
minimum, each animal's name. Because the name by itself is not very
interesting, the table should contain other information. For example,
if more than one person in your family keeps pets, you might want to
list each animal's owner. You might also want to record some basic
descriptive information such as species and sex.

How about age? That might be of interest, but it is not a good thing to
store in a database. Age changes as time passes, which means you'd have
to update your records often. Instead, it is better to store a fixed
value such as date of birth. Then, whenever you need age, you can
calculate it as the difference between the current date and the birth
date. MySQL provides functions for doing date arithmetic, so this is
not difficult.  Storing birth date rather than age has other
advantages, too:

   * You can use the database for tasks such as generating reminders
     for upcoming pet birthdays. (If you think this type of query is
     somewhat silly, note that it is the same question you might ask in
     the context of a business database to identify clients to whom you
     need to send out birthday greetings in the current week or month,
     for that computer-assisted personal touch.)

   * You can calculate age in relation to dates other than the current
     date. For example, if you store death date in the database, you
     can easily calculate how old a pet was when it died.

You can probably think of other types of information that would be
useful in the `pet' table, but the ones identified so far are
sufficient: name, owner, species, sex, birth, and death.

Use a *Note `CREATE TABLE': create-table. statement to specify the
layout of your table:

     mysql> CREATE TABLE pet (name VARCHAR(20), owner VARCHAR(20),
         -> species VARCHAR(20), sex CHAR(1), birth DATE, death DATE);

*Note `VARCHAR': char. is a good choice for the `name', `owner', and
`species' columns because the column values vary in length. The lengths
in those column definitions need not all be the same, and need not be
`20'. You can normally pick any length from `1' to `65535', whatever
seems most reasonable to you.  If you make a poor choice and it turns
out later that you need a longer field, MySQL provides an *Note `ALTER
TABLE': alter-table. statement.

Several types of values can be chosen to represent sex in animal
records, such as `'m'' and `'f'', or perhaps `'male'' and `'female''.
It is simplest to use the single characters `'m'' and `'f''.

The use of the *Note `DATE': datetime. data type for the `birth' and
`death' columns is a fairly obvious choice.

Once you have created a table, *Note `SHOW TABLES': show-tables. should
produce some output:

     mysql> SHOW TABLES;
     +---------------------+
     | Tables in menagerie |
     +---------------------+
     | pet                 |
     +---------------------+

To verify that your table was created the way you expected, use a *Note
`DESCRIBE': describe. statement:

     mysql> DESCRIBE pet;
     +---------+-------------+------+-----+---------+-------+
     | Field   | Type        | Null | Key | Default | Extra |
     +---------+-------------+------+-----+---------+-------+
     | name    | varchar(20) | YES  |     | NULL    |       |
     | owner   | varchar(20) | YES  |     | NULL    |       |
     | species | varchar(20) | YES  |     | NULL    |       |
     | sex     | char(1)     | YES  |     | NULL    |       |
     | birth   | date        | YES  |     | NULL    |       |
     | death   | date        | YES  |     | NULL    |       |
     +---------+-------------+------+-----+---------+-------+

You can use *Note `DESCRIBE': describe. any time, for example, if you
forget the names of the columns in your table or what types they have.

For more information about MySQL data types, see *Note data-types::.


File: manual.info,  Node: loading-tables,  Next: retrieving-data,  Prev: creating-tables,  Up: database-use

3.3.3 Loading Data into a Table
-------------------------------

After creating your table, you need to populate it. The *Note `LOAD
DATA': load-data. and *Note `INSERT': insert. statements are useful for
this.

Suppose that your pet records can be described as shown here.  (Observe
that MySQL expects dates in `'YYYY-MM-DD'' format; this may be different
from what you are used to.)

This table illustrates the example of `pet records' mentioned in the
preceding text.

name    owner   species sex  birth          death
Fluffy  Harold  cat     f    1993-02-04     
Claws   Gwen    cat     m    1994-03-17     
Buffy   Harold  dog     f    1989-05-13     
Fang    Benny   dog     m    1990-08-27     
Bowser  Diane   dog     m    1979-08-31     1995-07-29
Chirpy  Gwen    bird    f    1998-09-11     
WhistlerGwen    bird         1997-12-09     
Slim    Benny   snake   m    1996-04-29     

Because you are beginning with an empty table, an easy way to populate
it is to create a text file containing a row for each of your animals,
then load the contents of the file into the table with a single
statement.

You could create a text file `pet.txt' containing one record per line,
with values separated by tabs, and given in the order in which the
columns were listed in the *Note `CREATE TABLE': create-table.
statement. For missing values (such as unknown sexes or death dates for
animals that are still living), you can use `NULL' values. To represent
these in your text file, use `\N' (backslash, capital-N). For example,
the record for Whistler the bird would look like this (where the
whitespace between values is a single tab character):

     Whistler        Gwen    bird    \N      1997-12-09      \N

To load the text file `pet.txt' into the `pet' table, use this
statement:

     mysql> LOAD DATA LOCAL INFILE '/path/pet.txt' INTO TABLE pet;

If you created the file on Windows with an editor that uses `\r\n' as a
line terminator, you should use this statement instead:

     mysql> LOAD DATA LOCAL INFILE '/path/pet.txt' INTO TABLE pet
         -> LINES TERMINATED BY '\r\n';

(On an Apple machine running OS X, you would likely want to use `LINES
TERMINATED BY '\r''.)

You can specify the column value separator and end of line marker
explicitly in the *Note `LOAD DATA': load-data. statement if you wish,
but the defaults are tab and linefeed. These are sufficient for the
statement to read the file `pet.txt' properly.

If the statement fails, it is likely that your MySQL installation does
not have local file capability enabled by default. See *Note
load-data-local::, for information on how to change this.

When you want to add new records one at a time, the *Note `INSERT':
insert. statement is useful. In its simplest form, you supply values
for each column, in the order in which the columns were listed in the
*Note `CREATE TABLE': create-table. statement. Suppose that Diane gets
a new hamster named `Puffball.' You could add a new record using an
*Note `INSERT': insert. statement like this:

     mysql> INSERT INTO pet
         -> VALUES ('Puffball','Diane','hamster','f','1999-03-30',NULL);

String and date values are specified as quoted strings here.  Also,
with *Note `INSERT': insert, you can insert `NULL' directly to
represent a missing value.  You do not use `\N' like you do with *Note
`LOAD DATA': load-data.

From this example, you should be able to see that there would be a lot
more typing involved to load your records initially using several *Note
`INSERT': insert. statements rather than a single *Note `LOAD DATA':
load-data.  statement.


File: manual.info,  Node: retrieving-data,  Prev: loading-tables,  Up: database-use

3.3.4 Retrieving Information from a Table
-----------------------------------------

* Menu:

* selecting-all::                Selecting All Data
* selecting-rows::               Selecting Particular Rows
* selecting-columns::            Selecting Particular Columns
* sorting-rows::                 Sorting Rows
* date-calculations::            Date Calculations
* working-with-null::            Working with `NULL' Values
* pattern-matching::             Pattern Matching
* counting-rows::                Counting Rows
* multiple-tables::              Using More Than one Table

The *Note `SELECT': select. statement is used to pull information from
a table. The general form of the statement is:

     SELECT WHAT_TO_SELECT
     FROM WHICH_TABLE
     WHERE CONDITIONS_TO_SATISFY;

WHAT_TO_SELECT indicates what you want to see. This can be a list of
columns, or `*' to indicate `all columns.' WHICH_TABLE indicates the
table from which you want to retrieve data. The `WHERE' clause is
optional. If it is present, CONDITIONS_TO_SATISFY specifies one or more
conditions that rows must satisfy to qualify for retrieval.


File: manual.info,  Node: selecting-all,  Next: selecting-rows,  Prev: retrieving-data,  Up: retrieving-data

3.3.4.1 Selecting All Data
..........................

The simplest form of *Note `SELECT': select.  retrieves everything from
a table:

     mysql> SELECT * FROM pet;
     +----------+--------+---------+------+------------+------------+
     | name     | owner  | species | sex  | birth      | death      |
     +----------+--------+---------+------+------------+------------+
     | Fluffy   | Harold | cat     | f    | 1993-02-04 | NULL       |
     | Claws    | Gwen   | cat     | m    | 1994-03-17 | NULL       |
     | Buffy    | Harold | dog     | f    | 1989-05-13 | NULL       |
     | Fang     | Benny  | dog     | m    | 1990-08-27 | NULL       |
     | Bowser   | Diane  | dog     | m    | 1979-08-31 | 1995-07-29 |
     | Chirpy   | Gwen   | bird    | f    | 1998-09-11 | NULL       |
     | Whistler | Gwen   | bird    | NULL | 1997-12-09 | NULL       |
     | Slim     | Benny  | snake   | m    | 1996-04-29 | NULL       |
     | Puffball | Diane  | hamster | f    | 1999-03-30 | NULL       |
     +----------+--------+---------+------+------------+------------+

This form of *Note `SELECT': select. is useful if you want to review
your entire table, for example, after you've just loaded it with your
initial data set. For example, you may happen to think that the birth
date for Bowser doesn't seem quite right. Consulting your original
pedigree papers, you find that the correct birth year should be 1989,
not 1979.

There are at least two ways to fix this:

   * Edit the file `pet.txt' to correct the error, then empty the table
     and reload it using *Note `DELETE': delete. and *Note `LOAD DATA':
     load-data.:

          mysql> DELETE FROM pet;
          mysql> LOAD DATA LOCAL INFILE 'pet.txt' INTO TABLE pet;

     However, if you do this, you must also re-enter the record for
     Puffball.

   * Fix only the erroneous record with an *Note `UPDATE': update.
     statement:

          mysql> UPDATE pet SET birth = '1989-08-31' WHERE name = 'Bowser';

     The *Note `UPDATE': update. changes only the record in question
     and does not require you to reload the table.


File: manual.info,  Node: selecting-rows,  Next: selecting-columns,  Prev: selecting-all,  Up: retrieving-data

3.3.4.2 Selecting Particular Rows
.................................

As shown in the preceding section, it is easy to retrieve an entire
table. Just omit the `WHERE' clause from the *Note `SELECT': select.
statement. But typically you don't want to see the entire table,
particularly when it becomes large. Instead, you're usually more
interested in answering a particular question, in which case you specify
some constraints on the information you want. Let's look at some
selection queries in terms of questions about your pets that they
answer.

You can select only particular rows from your table. For example, if
you want to verify the change that you made to Bowser's birth date,
select Bowser's record like this:

     mysql> SELECT * FROM pet WHERE name = 'Bowser';
     +--------+-------+---------+------+------------+------------+
     | name   | owner | species | sex  | birth      | death      |
     +--------+-------+---------+------+------------+------------+
     | Bowser | Diane | dog     | m    | 1989-08-31 | 1995-07-29 |
     +--------+-------+---------+------+------------+------------+

The output confirms that the year is correctly recorded as 1989, not
1979.

String comparisons normally are case-insensitive, so you can specify
the name as `'bowser'', `'BOWSER'', and so forth. The query result is
the same.

You can specify conditions on any column, not just `name'. For example,
if you want to know which animals were born during or after 1998, test
the `birth' column:

     mysql> SELECT * FROM pet WHERE birth >= '1998-1-1';
     +----------+-------+---------+------+------------+-------+
     | name     | owner | species | sex  | birth      | death |
     +----------+-------+---------+------+------------+-------+
     | Chirpy   | Gwen  | bird    | f    | 1998-09-11 | NULL  |
     | Puffball | Diane | hamster | f    | 1999-03-30 | NULL  |
     +----------+-------+---------+------+------------+-------+

You can combine conditions, for example, to locate female dogs:

     mysql> SELECT * FROM pet WHERE species = 'dog' AND sex = 'f';
     +-------+--------+---------+------+------------+-------+
     | name  | owner  | species | sex  | birth      | death |
     +-------+--------+---------+------+------------+-------+
     | Buffy | Harold | dog     | f    | 1989-05-13 | NULL  |
     +-------+--------+---------+------+------------+-------+

The preceding query uses the `AND' logical operator. There is also an
`OR' operator:

     mysql> SELECT * FROM pet WHERE species = 'snake' OR species = 'bird';
     +----------+-------+---------+------+------------+-------+
     | name     | owner | species | sex  | birth      | death |
     +----------+-------+---------+------+------------+-------+
     | Chirpy   | Gwen  | bird    | f    | 1998-09-11 | NULL  |
     | Whistler | Gwen  | bird    | NULL | 1997-12-09 | NULL  |
     | Slim     | Benny | snake   | m    | 1996-04-29 | NULL  |
     +----------+-------+---------+------+------------+-------+

`AND' and `OR' may be intermixed, although `AND' has higher precedence
than `OR'. If you use both operators, it is a good idea to use
parentheses to indicate explicitly how conditions should be grouped:

     mysql> SELECT * FROM pet WHERE (species = 'cat' AND sex = 'm')
         -> OR (species = 'dog' AND sex = 'f');
     +-------+--------+---------+------+------------+-------+
     | name  | owner  | species | sex  | birth      | death |
     +-------+--------+---------+------+------------+-------+
     | Claws | Gwen   | cat     | m    | 1994-03-17 | NULL  |
     | Buffy | Harold | dog     | f    | 1989-05-13 | NULL  |
     +-------+--------+---------+------+------------+-------+


File: manual.info,  Node: selecting-columns,  Next: sorting-rows,  Prev: selecting-rows,  Up: retrieving-data

3.3.4.3 Selecting Particular Columns
....................................

If you do not want to see entire rows from your table, just name the
columns in which you are interested, separated by commas. For example,
if you want to know when your animals were born, select the `name' and
`birth' columns:

     mysql> SELECT name, birth FROM pet;
     +----------+------------+
     | name     | birth      |
     +----------+------------+
     | Fluffy   | 1993-02-04 |
     | Claws    | 1994-03-17 |
     | Buffy    | 1989-05-13 |
     | Fang     | 1990-08-27 |
     | Bowser   | 1989-08-31 |
     | Chirpy   | 1998-09-11 |
     | Whistler | 1997-12-09 |
     | Slim     | 1996-04-29 |
     | Puffball | 1999-03-30 |
     +----------+------------+

To find out who owns pets, use this query:

     mysql> SELECT owner FROM pet;
     +--------+
     | owner  |
     +--------+
     | Harold |
     | Gwen   |
     | Harold |
     | Benny  |
     | Diane  |
     | Gwen   |
     | Gwen   |
     | Benny  |
     | Diane  |
     +--------+

Notice that the query simply retrieves the `owner' column from each
record, and some of them appear more than once. To minimize the output,
retrieve each unique output record just once by adding the keyword
`DISTINCT':

     mysql> SELECT DISTINCT owner FROM pet;
     +--------+
     | owner  |
     +--------+
     | Benny  |
     | Diane  |
     | Gwen   |
     | Harold |
     +--------+

You can use a `WHERE' clause to combine row selection with column
selection. For example, to get birth dates for dogs and cats only, use
this query:

     mysql> SELECT name, species, birth FROM pet
         -> WHERE species = 'dog' OR species = 'cat';
     +--------+---------+------------+
     | name   | species | birth      |
     +--------+---------+------------+
     | Fluffy | cat     | 1993-02-04 |
     | Claws  | cat     | 1994-03-17 |
     | Buffy  | dog     | 1989-05-13 |
     | Fang   | dog     | 1990-08-27 |
     | Bowser | dog     | 1989-08-31 |
     +--------+---------+------------+


File: manual.info,  Node: sorting-rows,  Next: date-calculations,  Prev: selecting-columns,  Up: retrieving-data

3.3.4.4 Sorting Rows
....................

You may have noticed in the preceding examples that the result rows are
displayed in no particular order. It is often easier to examine query
output when the rows are sorted in some meaningful way. To sort a
result, use an `ORDER BY' clause.

Here are animal birthdays, sorted by date:

     mysql> SELECT name, birth FROM pet ORDER BY birth;
     +----------+------------+
     | name     | birth      |
     +----------+------------+
     | Buffy    | 1989-05-13 |
     | Bowser   | 1989-08-31 |
     | Fang     | 1990-08-27 |
     | Fluffy   | 1993-02-04 |
     | Claws    | 1994-03-17 |
     | Slim     | 1996-04-29 |
     | Whistler | 1997-12-09 |
     | Chirpy   | 1998-09-11 |
     | Puffball | 1999-03-30 |
     +----------+------------+

On character type columns, sorting--like all other comparison
operations--is normally performed in a case-insensitive fashion. This
means that the order is undefined for columns that are identical except
for their case. You can force a case-sensitive sort for a column by
using `BINARY' like so: `ORDER BY BINARY COL_NAME'.

The default sort order is ascending, with smallest values first. To
sort in reverse (descending) order, add the `DESC' keyword to the name
of the column you are sorting by:

     mysql> SELECT name, birth FROM pet ORDER BY birth DESC;
     +----------+------------+
     | name     | birth      |
     +----------+------------+
     | Puffball | 1999-03-30 |
     | Chirpy   | 1998-09-11 |
     | Whistler | 1997-12-09 |
     | Slim     | 1996-04-29 |
     | Claws    | 1994-03-17 |
     | Fluffy   | 1993-02-04 |
     | Fang     | 1990-08-27 |
     | Bowser   | 1989-08-31 |
     | Buffy    | 1989-05-13 |
     +----------+------------+

You can sort on multiple columns, and you can sort different columns in
different directions. For example, to sort by type of animal in
ascending order, then by birth date within animal type in descending
order (youngest animals first), use the following query:

     mysql> SELECT name, species, birth FROM pet
         -> ORDER BY species, birth DESC;
     +----------+---------+------------+
     | name     | species | birth      |
     +----------+---------+------------+
     | Chirpy   | bird    | 1998-09-11 |
     | Whistler | bird    | 1997-12-09 |
     | Claws    | cat     | 1994-03-17 |
     | Fluffy   | cat     | 1993-02-04 |
     | Fang     | dog     | 1990-08-27 |
     | Bowser   | dog     | 1989-08-31 |
     | Buffy    | dog     | 1989-05-13 |
     | Puffball | hamster | 1999-03-30 |
     | Slim     | snake   | 1996-04-29 |
     +----------+---------+------------+

The `DESC' keyword applies only to the column name immediately
preceding it (`birth'); it does not affect the `species' column sort
order.


File: manual.info,  Node: date-calculations,  Next: working-with-null,  Prev: sorting-rows,  Up: retrieving-data

3.3.4.5 Date Calculations
.........................

MySQL provides several functions that you can use to perform
calculations on dates, for example, to calculate ages or extract parts
of dates.

To determine how many years old each of your pets is, use the
`TIMESTAMPDIFF()' function. Its arguments are the unit in which you
want the result expressed, and the two date for which to take the
difference. The following query shows, for each pet, the birth date, the
current date, and the age in years. An _alias_ (`age') is used to make
the final output column label more meaningful.

     mysql> SELECT name, birth, CURDATE(),
         -> TIMESTAMPDIFF(YEAR,birth,CURDATE()) AS age
         -> FROM pet;
     +----------+------------+------------+------+
     | name     | birth      | CURDATE()  | age  |
     +----------+------------+------------+------+
     | Fluffy   | 1993-02-04 | 2003-08-19 |   10 |
     | Claws    | 1994-03-17 | 2003-08-19 |    9 |
     | Buffy    | 1989-05-13 | 2003-08-19 |   14 |
     | Fang     | 1990-08-27 | 2003-08-19 |   12 |
     | Bowser   | 1989-08-31 | 2003-08-19 |   13 |
     | Chirpy   | 1998-09-11 | 2003-08-19 |    4 |
     | Whistler | 1997-12-09 | 2003-08-19 |    5 |
     | Slim     | 1996-04-29 | 2003-08-19 |    7 |
     | Puffball | 1999-03-30 | 2003-08-19 |    4 |
     +----------+------------+------------+------+

The query works, but the result could be scanned more easily if the
rows were presented in some order. This can be done by adding an `ORDER
BY name' clause to sort the output by name:

     mysql> SELECT name, birth, CURDATE(),
         -> TIMESTAMPDIFF(YEAR,birth,CURDATE()) AS age
         -> FROM pet ORDER BY name;
     +----------+------------+------------+------+
     | name     | birth      | CURDATE()  | age  |
     +----------+------------+------------+------+
     | Bowser   | 1989-08-31 | 2003-08-19 |   13 |
     | Buffy    | 1989-05-13 | 2003-08-19 |   14 |
     | Chirpy   | 1998-09-11 | 2003-08-19 |    4 |
     | Claws    | 1994-03-17 | 2003-08-19 |    9 |
     | Fang     | 1990-08-27 | 2003-08-19 |   12 |
     | Fluffy   | 1993-02-04 | 2003-08-19 |   10 |
     | Puffball | 1999-03-30 | 2003-08-19 |    4 |
     | Slim     | 1996-04-29 | 2003-08-19 |    7 |
     | Whistler | 1997-12-09 | 2003-08-19 |    5 |
     +----------+------------+------------+------+

To sort the output by `age' rather than `name', just use a different
`ORDER BY' clause:

     mysql> SELECT name, birth, CURDATE(),
         -> TIMESTAMPDIFF(YEAR,birth,CURDATE()) AS age
         -> FROM pet ORDER BY age;
     +----------+------------+------------+------+
     | name     | birth      | CURDATE()  | age  |
     +----------+------------+------------+------+
     | Chirpy   | 1998-09-11 | 2003-08-19 |    4 |
     | Puffball | 1999-03-30 | 2003-08-19 |    4 |
     | Whistler | 1997-12-09 | 2003-08-19 |    5 |
     | Slim     | 1996-04-29 | 2003-08-19 |    7 |
     | Claws    | 1994-03-17 | 2003-08-19 |    9 |
     | Fluffy   | 1993-02-04 | 2003-08-19 |   10 |
     | Fang     | 1990-08-27 | 2003-08-19 |   12 |
     | Bowser   | 1989-08-31 | 2003-08-19 |   13 |
     | Buffy    | 1989-05-13 | 2003-08-19 |   14 |
     +----------+------------+------------+------+

A similar query can be used to determine age at death for animals that
have died. You determine which animals these are by checking whether
the `death' value is `NULL'. Then, for those with non-`NULL' values,
compute the difference between the `death' and `birth' values:

     mysql> SELECT name, birth, death,
         -> TIMESTAMPDIFF(YEAR,birth,death) AS age
         -> FROM pet WHERE death IS NOT NULL ORDER BY age;
     +--------+------------+------------+------+
     | name   | birth      | death      | age  |
     +--------+------------+------------+------+
     | Bowser | 1989-08-31 | 1995-07-29 |    5 |
     +--------+------------+------------+------+

The query uses `death IS NOT NULL' rather than `death <> NULL' because
`NULL' is a special value that cannot be compared using the usual
comparison operators. This is discussed later. See *Note
working-with-null::.

What if you want to know which animals have birthdays next month? For
this type of calculation, year and day are irrelevant; you simply want
to extract the month part of the `birth' column. MySQL provides several
functions for extracting parts of dates, such as `YEAR()', `MONTH()',
and `DAYOFMONTH()'.  `MONTH()' is the appropriate function here. To see
how it works, run a simple query that displays the value of both
`birth' and `MONTH(birth)':

     mysql> SELECT name, birth, MONTH(birth) FROM pet;
     +----------+------------+--------------+
     | name     | birth      | MONTH(birth) |
     +----------+------------+--------------+
     | Fluffy   | 1993-02-04 |            2 |
     | Claws    | 1994-03-17 |            3 |
     | Buffy    | 1989-05-13 |            5 |
     | Fang     | 1990-08-27 |            8 |
     | Bowser   | 1989-08-31 |            8 |
     | Chirpy   | 1998-09-11 |            9 |
     | Whistler | 1997-12-09 |           12 |
     | Slim     | 1996-04-29 |            4 |
     | Puffball | 1999-03-30 |            3 |
     +----------+------------+--------------+

Finding animals with birthdays in the upcoming month is also simple.
Suppose that the current month is April. Then the month value is `4'
and you can look for animals born in May (month `5') like this:

     mysql> SELECT name, birth FROM pet WHERE MONTH(birth) = 5;
     +-------+------------+
     | name  | birth      |
     +-------+------------+
     | Buffy | 1989-05-13 |
     +-------+------------+

There is a small complication if the current month is December. You
cannot merely add one to the month number (`12') and look for animals
born in month `13', because there is no such month.  Instead, you look
for animals born in January (month `1').

You can write the query so that it works no matter what the current
month is, so that you do not have to use the number for a particular
month.  `DATE_ADD()' enables you to add a time interval to a given
date. If you add a month to the value of `CURDATE()', then extract the
month part with `MONTH()', the result produces the month in which to
look for birthdays:

     mysql> SELECT name, birth FROM pet
         -> WHERE MONTH(birth) = MONTH(DATE_ADD(CURDATE(),INTERVAL 1 MONTH));

A different way to accomplish the same task is to add `1' to get the
next month after the current one after using the modulo function (`MOD')
to wrap the month value to `0' if it is currently `12':

     mysql> SELECT name, birth FROM pet
         -> WHERE MONTH(birth) = MOD(MONTH(CURDATE()), 12) + 1;

`MONTH()' returns a number between `1' and `12'. And
`MOD(something,12)' returns a number between `0' and `11'.  So the
addition has to be after the `MOD()', otherwise we would go from
November (`11') to January (`1').


File: manual.info,  Node: working-with-null,  Next: pattern-matching,  Prev: date-calculations,  Up: retrieving-data

3.3.4.6 Working with `NULL' Values
..................................

The `NULL' value can be surprising until you get used to it.
Conceptually, `NULL' means `a missing unknown value' and it is treated
somewhat differently from other values.

To test for `NULL', use the `IS NULL' and `IS NOT NULL' operators, as
shown here:

     mysql> SELECT 1 IS NULL, 1 IS NOT NULL;
     +-----------+---------------+
     | 1 IS NULL | 1 IS NOT NULL |
     +-----------+---------------+
     |         0 |             1 |
     +-----------+---------------+

You cannot use arithmetic comparison operators such as `=', `<', or
`<>' to test for `NULL'. To demonstrate this for yourself, try the
following query:

     mysql> SELECT 1 = NULL, 1 <> NULL, 1 < NULL, 1 > NULL;
     +----------+-----------+----------+----------+
     | 1 = NULL | 1 <> NULL | 1 < NULL | 1 > NULL |
     +----------+-----------+----------+----------+
     |     NULL |      NULL |     NULL |     NULL |
     +----------+-----------+----------+----------+

Because the result of any arithmetic comparison with `NULL' is also
`NULL', you cannot obtain any meaningful results from such comparisons.

In MySQL, `0' or `NULL' means false and anything else means true. The
default truth value from a boolean operation is `1'.

This special treatment of `NULL' is why, in the previous section, it
was necessary to determine which animals are no longer alive using
`death IS NOT NULL' instead of `death <> NULL'.

Two `NULL' values are regarded as equal in a `GROUP BY'.

When doing an `ORDER BY', `NULL' values are presented first if you do
`ORDER BY ... ASC' and last if you do `ORDER BY ... DESC'.

A common error when working with `NULL' is to assume that it is not
possible to insert a zero or an empty string into a column defined as
`NOT NULL', but this is not the case. These are in fact values, whereas
`NULL' means `not having a value.' You can test this easily enough by
using `IS [NOT] NULL' as shown:

     mysql> SELECT 0 IS NULL, 0 IS NOT NULL, '' IS NULL, '' IS NOT NULL;
     +-----------+---------------+------------+----------------+
     | 0 IS NULL | 0 IS NOT NULL | '' IS NULL | '' IS NOT NULL |
     +-----------+---------------+------------+----------------+
     |         0 |             1 |          0 |              1 |
     +-----------+---------------+------------+----------------+

Thus it is entirely possible to insert a zero or empty string into a
`NOT NULL' column, as these are in fact `NOT NULL'. See *Note
problems-with-null::.


File: manual.info,  Node: pattern-matching,  Next: counting-rows,  Prev: working-with-null,  Up: retrieving-data

3.3.4.7 Pattern Matching
........................

MySQL provides standard SQL pattern matching as well as a form of
pattern matching based on extended regular expressions similar to those
used by Unix utilities such as `vi', `grep', and `sed'.

SQL pattern matching enables you to use ``_'' to match any single
character and ``%'' to match an arbitrary number of characters
(including zero characters). In MySQL, SQL patterns are
case-insensitive by default. Some examples are shown here. You do not
use `=' or `<>' when you use SQL patterns; use the `LIKE' or `NOT LIKE'
comparison operators instead.

To find names beginning with ``b'':

     mysql> SELECT * FROM pet WHERE name LIKE 'b%';
     +--------+--------+---------+------+------------+------------+
     | name   | owner  | species | sex  | birth      | death      |
     +--------+--------+---------+------+------------+------------+
     | Buffy  | Harold | dog     | f    | 1989-05-13 | NULL       |
     | Bowser | Diane  | dog     | m    | 1989-08-31 | 1995-07-29 |
     +--------+--------+---------+------+------------+------------+

To find names ending with ``fy'':

     mysql> SELECT * FROM pet WHERE name LIKE '%fy';
     +--------+--------+---------+------+------------+-------+
     | name   | owner  | species | sex  | birth      | death |
     +--------+--------+---------+------+------------+-------+
     | Fluffy | Harold | cat     | f    | 1993-02-04 | NULL  |
     | Buffy  | Harold | dog     | f    | 1989-05-13 | NULL  |
     +--------+--------+---------+------+------------+-------+

To find names containing a ``w'':

     mysql> SELECT * FROM pet WHERE name LIKE '%w%';
     +----------+-------+---------+------+------------+------------+
     | name     | owner | species | sex  | birth      | death      |
     +----------+-------+---------+------+------------+------------+
     | Claws    | Gwen  | cat     | m    | 1994-03-17 | NULL       |
     | Bowser   | Diane | dog     | m    | 1989-08-31 | 1995-07-29 |
     | Whistler | Gwen  | bird    | NULL | 1997-12-09 | NULL       |
     +----------+-------+---------+------+------------+------------+

To find names containing exactly five characters, use five instances of
the ``_'' pattern character:

     mysql> SELECT * FROM pet WHERE name LIKE '_____';
     +-------+--------+---------+------+------------+-------+
     | name  | owner  | species | sex  | birth      | death |
     +-------+--------+---------+------+------------+-------+
     | Claws | Gwen   | cat     | m    | 1994-03-17 | NULL  |
     | Buffy | Harold | dog     | f    | 1989-05-13 | NULL  |
     +-------+--------+---------+------+------------+-------+

The other type of pattern matching provided by MySQL uses extended
regular expressions. When you test for a match for this type of
pattern, use the `REGEXP' and `NOT REGEXP' operators (or `RLIKE' and
`NOT RLIKE', which are synonyms).

The following list describes some characteristics of extended regular
expressions:

   * ``.'' matches any single character.

   * A character class ``[...]'' matches any character within the
     brackets. For example, ``[abc]'' matches ``a'', ``b'', or ``c''.
     To name a range of characters, use a dash.  ``[a-z]'' matches any
     letter, whereas ``[0-9]'' matches any digit.

   * ``*'' matches zero or more instances of the thing preceding it.
     For example, ``x*'' matches any number of ``x'' characters,
     ``[0-9]*'' matches any number of digits, and ``.*'' matches any
     number of anything.

   * A `REGEXP' pattern match succeeds if the pattern matches anywhere
     in the value being tested. (This differs from a `LIKE' pattern
     match, which succeeds only if the pattern matches the entire
     value.)

   * To anchor a pattern so that it must match the beginning or end of
     the value being tested, use ``^'' at the beginning or ``$'' at the
     end of the pattern.

To demonstrate how extended regular expressions work, the `LIKE'
queries shown previously are rewritten here to use `REGEXP'.

To find names beginning with ``b'', use ``^'' to match the beginning of
the name:

     mysql> SELECT * FROM pet WHERE name REGEXP '^b';
     +--------+--------+---------+------+------------+------------+
     | name   | owner  | species | sex  | birth      | death      |
     +--------+--------+---------+------+------------+------------+
     | Buffy  | Harold | dog     | f    | 1989-05-13 | NULL       |
     | Bowser | Diane  | dog     | m    | 1989-08-31 | 1995-07-29 |
     +--------+--------+---------+------+------------+------------+

If you really want to force a `REGEXP' comparison to be case sensitive,
use the `BINARY' keyword to make one of the strings a binary string.
This query matches only lowercase ``b'' at the beginning of a name:

     mysql> SELECT * FROM pet WHERE name REGEXP BINARY '^b';

To find names ending with ``fy'', use ``$'' to match the end of the
name:

     mysql> SELECT * FROM pet WHERE name REGEXP 'fy$';
     +--------+--------+---------+------+------------+-------+
     | name   | owner  | species | sex  | birth      | death |
     +--------+--------+---------+------+------------+-------+
     | Fluffy | Harold | cat     | f    | 1993-02-04 | NULL  |
     | Buffy  | Harold | dog     | f    | 1989-05-13 | NULL  |
     +--------+--------+---------+------+------------+-------+

To find names containing a ``w'', use this query:

     mysql> SELECT * FROM pet WHERE name REGEXP 'w';
     +----------+-------+---------+------+------------+------------+
     | name     | owner | species | sex  | birth      | death      |
     +----------+-------+---------+------+------------+------------+
     | Claws    | Gwen  | cat     | m    | 1994-03-17 | NULL       |
     | Bowser   | Diane | dog     | m    | 1989-08-31 | 1995-07-29 |
     | Whistler | Gwen  | bird    | NULL | 1997-12-09 | NULL       |
     +----------+-------+---------+------+------------+------------+

Because a regular expression pattern matches if it occurs anywhere in
the value, it is not necessary in the previous query to put a wildcard
on either side of the pattern to get it to match the entire value like
it would be if you used an SQL pattern.

To find names containing exactly five characters, use ``^'' and ``$''
to match the beginning and end of the name, and five instances of ``.''
in between:

     mysql> SELECT * FROM pet WHERE name REGEXP '^.....$';
     +-------+--------+---------+------+------------+-------+
     | name  | owner  | species | sex  | birth      | death |
     +-------+--------+---------+------+------------+-------+
     | Claws | Gwen   | cat     | m    | 1994-03-17 | NULL  |
     | Buffy | Harold | dog     | f    | 1989-05-13 | NULL  |
     +-------+--------+---------+------+------------+-------+

You could also write the previous query using the `{N}'
(`repeat-N-times') operator:

     mysql> SELECT * FROM pet WHERE name REGEXP '^.{5}$';
     +-------+--------+---------+------+------------+-------+
     | name  | owner  | species | sex  | birth      | death |
     +-------+--------+---------+------+------------+-------+
     | Claws | Gwen   | cat     | m    | 1994-03-17 | NULL  |
     | Buffy | Harold | dog     | f    | 1989-05-13 | NULL  |
     +-------+--------+---------+------+------------+-------+

*Note regexp::, provides more information about the syntax for regular
expressions.


File: manual.info,  Node: counting-rows,  Next: multiple-tables,  Prev: pattern-matching,  Up: retrieving-data

3.3.4.8 Counting Rows
.....................

Databases are often used to answer the question, `How often does a
certain type of data occur in a table?' For example, you might want to
know how many pets you have, or how many pets each owner has, or you
might want to perform various kinds of census operations on your
animals.

Counting the total number of animals you have is the same question as
`How many rows are in the `pet' table?' because there is one record per
pet. `COUNT(*)' counts the number of rows, so the query to count your
animals looks like this:

     mysql> SELECT COUNT(*) FROM pet;
     +----------+
     | COUNT(*) |
     +----------+
     |        9 |
     +----------+

Earlier, you retrieved the names of the people who owned pets.  You can
use `COUNT()' if you want to find out how many pets each owner has:

     mysql> SELECT owner, COUNT(*) FROM pet GROUP BY owner;
     +--------+----------+
     | owner  | COUNT(*) |
     +--------+----------+
     | Benny  |        2 |
     | Diane  |        2 |
     | Gwen   |        3 |
     | Harold |        2 |
     +--------+----------+

The preceding query uses `GROUP BY' to group all records for each
`owner'. The use of `COUNT()' in conjunction with `GROUP BY' is useful
for characterizing your data under various groupings. The following
examples show different ways to perform animal census operations.

Number of animals per species:

     mysql> SELECT species, COUNT(*) FROM pet GROUP BY species;
     +---------+----------+
     | species | COUNT(*) |
     +---------+----------+
     | bird    |        2 |
     | cat     |        2 |
     | dog     |        3 |
     | hamster |        1 |
     | snake   |        1 |
     +---------+----------+

Number of animals per sex:

     mysql> SELECT sex, COUNT(*) FROM pet GROUP BY sex;
     +------+----------+
     | sex  | COUNT(*) |
     +------+----------+
     | NULL |        1 |
     | f    |        4 |
     | m    |        4 |
     +------+----------+

(In this output, `NULL' indicates that the sex is unknown.)

Number of animals per combination of species and sex:

     mysql> SELECT species, sex, COUNT(*) FROM pet GROUP BY species, sex;
     +---------+------+----------+
     | species | sex  | COUNT(*) |
     +---------+------+----------+
     | bird    | NULL |        1 |
     | bird    | f    |        1 |
     | cat     | f    |        1 |
     | cat     | m    |        1 |
     | dog     | f    |        1 |
     | dog     | m    |        2 |
     | hamster | f    |        1 |
     | snake   | m    |        1 |
     +---------+------+----------+

You need not retrieve an entire table when you use `COUNT()'. For
example, the previous query, when performed just on dogs and cats, looks
like this:

     mysql> SELECT species, sex, COUNT(*) FROM pet
         -> WHERE species = 'dog' OR species = 'cat'
         -> GROUP BY species, sex;
     +---------+------+----------+
     | species | sex  | COUNT(*) |
     +---------+------+----------+
     | cat     | f    |        1 |
     | cat     | m    |        1 |
     | dog     | f    |        1 |
     | dog     | m    |        2 |
     +---------+------+----------+

Or, if you wanted the number of animals per sex only for animals whose
sex is known:

     mysql> SELECT species, sex, COUNT(*) FROM pet
         -> WHERE sex IS NOT NULL
         -> GROUP BY species, sex;
     +---------+------+----------+
     | species | sex  | COUNT(*) |
     +---------+------+----------+
     | bird    | f    |        1 |
     | cat     | f    |        1 |
     | cat     | m    |        1 |
     | dog     | f    |        1 |
     | dog     | m    |        2 |
     | hamster | f    |        1 |
     | snake   | m    |        1 |
     +---------+------+----------+

If you name columns to select in addition to the `COUNT()' value, a
`GROUP BY' clause should be present that names those same columns.
Otherwise, the following occurs:

   * If the `ONLY_FULL_GROUP_BY' SQL mode is enabled, an error occurs:

          mysql> SET sql_mode = 'ONLY_FULL_GROUP_BY';
          Query OK, 0 rows affected (0.00 sec)

          mysql> SELECT owner, COUNT(*) FROM pet;
          ERROR 1140 (42000): Mixing of GROUP columns (MIN(),MAX(),COUNT()...)
          with no GROUP columns is illegal if there is no GROUP BY clause

   * If `ONLY_FULL_GROUP_BY' is not enabled, the query is processed by
     treating all rows as a single group, but the value selected for
     each named column is indeterminate. The server is free to select
     the value from any row:

          mysql> SET sql_mode = '';
          Query OK, 0 rows affected (0.00 sec)

          mysql> SELECT owner, COUNT(*) FROM pet;
          +--------+----------+
          | owner  | COUNT(*) |
          +--------+----------+
          | Harold |        8 |
          +--------+----------+
          1 row in set (0.00 sec)

See also *Note group-by-extensions::.


File: manual.info,  Node: multiple-tables,  Prev: counting-rows,  Up: retrieving-data

3.3.4.9 Using More Than one Table
.................................

The `pet' table keeps track of which pets you have. If you want to
record other information about them, such as events in their lives like
visits to the vet or when litters are born, you need another table.
What should this table look like? It needs to contain the following
information:

   * The pet name so that you know which animal each event pertains to.

   * A date so that you know when the event occurred.

   * A field to describe the event.

   * An event type field, if you want to be able to categorize events.

Given these considerations, the *Note `CREATE TABLE': create-table.
statement for the `event' table might look like this:

     mysql> CREATE TABLE event (name VARCHAR(20), date DATE,
         -> type VARCHAR(15), remark VARCHAR(255));

As with the `pet' table, it is easiest to load the initial records by
creating a tab-delimited text file containing the following information.

This table represents `pet record' data that will appear in a tab
delimited text file, as described in the preceding text.

name        date        type        remark
Fluffy      1995-05-15  litter      4 kittens, 3 female, 1
                                    male
Buffy       1993-06-23  litter      5 puppies, 2 female, 3
                                    male
Buffy       1994-06-19  litter      3 puppies, 3 female
Chirpy      1999-03-21  vet         needed beak straightened
Slim        1997-08-03  vet         broken rib
Bowser      1991-10-12  kennel      
Fang        1991-10-12  kennel      
Fang        1998-08-28  birthday    Gave him a new chew toy
Claws       1998-03-17  birthday    Gave him a new flea
                                    collar
Whistler    1998-12-09  birthday    First birthday

Load the records like this:

     mysql> LOAD DATA LOCAL INFILE 'event.txt' INTO TABLE event;

Based on what you have learned from the queries that you have run on
the `pet' table, you should be able to perform retrievals on the
records in the `event' table; the principles are the same.  But when is
the `event' table by itself insufficient to answer questions you might
ask?

Suppose that you want to find out the ages at which each pet had its
litters. We saw earlier how to calculate ages from two dates. The
litter date of the mother is in the `event' table, but to calculate her
age on that date you need her birth date, which is stored in the `pet'
table. This means the query requires both tables:

     mysql> SELECT pet.name,
         -> (YEAR(date)-YEAR(birth)) - (RIGHT(date,5)<RIGHT(birth,5)) AS age,
         -> remark
         -> FROM pet INNER JOIN event
         ->   ON pet.name = event.name
         -> WHERE event.type = 'litter';
     +--------+------+-----------------------------+
     | name   | age  | remark                      |
     +--------+------+-----------------------------+
     | Fluffy |    2 | 4 kittens, 3 female, 1 male |
     | Buffy  |    4 | 5 puppies, 2 female, 3 male |
     | Buffy  |    5 | 3 puppies, 3 female         |
     +--------+------+-----------------------------+

There are several things to note about this query:

   * The `FROM' clause joins two tables because the query needs to pull
     information from both of them.

   * When combining (joining) information from multiple tables, you
     need to specify how records in one table can be matched to records
     in the other. This is easy because they both have a `name' column.
     The query uses an `ON' clause to match up records in the two
     tables based on the `name' values.

     The query uses an `INNER JOIN' to combine the tables. An `INNER
     JOIN' permits rows from either table to appear in the result if
     and only if both tables meet the conditions specified in the `ON'
     clause. In this example, the `ON' clause specifies that the `name'
     column in the `pet' table must match the `name' column in the
     `event' table. If a name appears in one table but not the other,
     the row will not appear in the result because the condition in the
     `ON' clause fails.

   * Because the `name' column occurs in both tables, you must be
     specific about which table you mean when referring to the column.
     This is done by prepending the table name to the column name.

You need not have two different tables to perform a join.  Sometimes it
is useful to join a table to itself, if you want to compare records in
a table to other records in that same table. For example, to find
breeding pairs among your pets, you can join the `pet' table with
itself to produce candidate pairs of males and females of like species:

     mysql> SELECT p1.name, p1.sex, p2.name, p2.sex, p1.species
         -> FROM pet AS p1 INNER JOIN pet AS p2
         ->   ON p1.species = p2.species AND p1.sex = 'f' AND p2.sex = 'm';
     +--------+------+--------+------+---------+
     | name   | sex  | name   | sex  | species |
     +--------+------+--------+------+---------+
     | Fluffy | f    | Claws  | m    | cat     |
     | Buffy  | f    | Fang   | m    | dog     |
     | Buffy  | f    | Bowser | m    | dog     |
     +--------+------+--------+------+---------+

In this query, we specify aliases for the table name to refer to the
columns and keep straight which instance of the table each column
reference is associated with.


File: manual.info,  Node: getting-information,  Next: batch-mode,  Prev: database-use,  Up: tutorial

3.4 Getting Information About Databases and Tables
==================================================

What if you forget the name of a database or table, or what the
structure of a given table is (for example, what its columns are
called)? MySQL addresses this problem through several statements that
provide information about the databases and tables it supports.

You have previously seen *Note `SHOW DATABASES': show-databases, which
lists the databases managed by the server. To find out which database
is currently selected, use the `DATABASE()' function:

     mysql> SELECT DATABASE();
     +------------+
     | DATABASE() |
     +------------+
     | menagerie  |
     +------------+

If you have not yet selected any database, the result is `NULL'.

To find out what tables the default database contains (for example,
when you are not sure about the name of a table), use this command:

     mysql> SHOW TABLES;
     +---------------------+
     | Tables_in_menagerie |
     +---------------------+
     | event               |
     | pet                 |
     +---------------------+

The name of the column in the output produced by this statement is
always `Tables_in_DB_NAME', where DB_NAME is the name of the database.
See *Note show-tables::, for more information.

If you want to find out about the structure of a table, the *Note
`DESCRIBE': describe. statement is useful; it displays information
about each of a table's columns:

     mysql> DESCRIBE pet;
     +---------+-------------+------+-----+---------+-------+
     | Field   | Type        | Null | Key | Default | Extra |
     +---------+-------------+------+-----+---------+-------+
     | name    | varchar(20) | YES  |     | NULL    |       |
     | owner   | varchar(20) | YES  |     | NULL    |       |
     | species | varchar(20) | YES  |     | NULL    |       |
     | sex     | char(1)     | YES  |     | NULL    |       |
     | birth   | date        | YES  |     | NULL    |       |
     | death   | date        | YES  |     | NULL    |       |
     +---------+-------------+------+-----+---------+-------+

`Field' indicates the column name, `Type' is the data type for the
column, `NULL' indicates whether the column can contain `NULL' values,
`Key' indicates whether the column is indexed, and `Default' specifies
the column's default value. `Extra' displays special information about
columns: If a column was created with the `AUTO_INCREMENT' option, the
value will be `auto_increment' rather than empty.

`DESC' is a short form of *Note `DESCRIBE': describe. See *Note
describe::, for more information.

You can obtain the *Note `CREATE TABLE': create-table.  statement
necessary to create an existing table using the *Note `SHOW CREATE
TABLE': show-create-table. statement. See *Note show-create-table::.

If you have indexes on a table, `SHOW INDEX FROM TBL_NAME' produces
information about them. See *Note show-index::, for more about this
statement.


File: manual.info,  Node: batch-mode,  Next: examples,  Prev: getting-information,  Up: tutorial

3.5 Using `mysql' in Batch Mode
===============================

In the previous sections, you used *Note `mysql': mysql.  interactively
to enter queries and view the results. You can also run *Note `mysql':
mysql. in batch mode. To do this, put the commands you want to run in a
file, then tell *Note `mysql': mysql. to read its input from the file:

     shell> mysql < BATCH-FILE

If you are running *Note `mysql': mysql. under Windows and have some
special characters in the file that cause problems, you can do this:

     C:\> mysql -e "source BATCH-FILE"

If you need to specify connection parameters on the command line, the
command might look like this:

     shell> mysql -h HOST -u USER -p < BATCH-FILE
     Enter password: ********

When you use *Note `mysql': mysql. this way, you are creating a script
file, then executing the script.

If you want the script to continue even if some of the statements in it
produce errors, you should use the `--force' command-line option.

Why use a script? Here are a few reasons:

   * If you run a query repeatedly (say, every day or every week),
     making it a script enables you to avoid retyping it each time you
     execute it.

   * You can generate new queries from existing ones that are similar
     by copying and editing script files.

   * Batch mode can also be useful while you're developing a query,
     particularly for multiple-line commands or multiple-statement
     sequences of commands. If you make a mistake, you don't have to
     retype everything. Just edit your script to correct the error,
     then tell *Note `mysql': mysql. to execute it again.

   * If you have a query that produces a lot of output, you can run the
     output through a pager rather than watching it scroll off the top
     of your screen:

          shell> mysql < BATCH-FILE | more

   * You can catch the output in a file for further processing:

          shell> mysql < BATCH-FILE > mysql.out

   * You can distribute your script to other people so that they can
     also run the commands.

   * Some situations do not allow for interactive use, for example,
     when you run a query from a `cron' job. In this case, you must use
     batch mode.

The default output format is different (more concise) when you run
*Note `mysql': mysql. in batch mode than when you use it interactively.
For example, the output of `SELECT DISTINCT species FROM pet' looks
like this when *Note `mysql': mysql. is run interactively:

     +---------+
     | species |
     +---------+
     | bird    |
     | cat     |
     | dog     |
     | hamster |
     | snake   |
     +---------+

In batch mode, the output looks like this instead:

     species
     bird
     cat
     dog
     hamster
     snake

If you want to get the interactive output format in batch mode, use
`mysql -t'. To echo to the output the commands that are executed, use
`mysql -vvv'.

You can also use scripts from the *Note `mysql': mysql. prompt by using
the `source' command or `\.' command:

     mysql> source FILENAME;
     mysql> \. FILENAME

See *Note mysql-batch-commands::, for more information.


File: manual.info,  Node: examples,  Next: apache,  Prev: batch-mode,  Up: tutorial

3.6 Examples of Common Queries
==============================

* Menu:

* example-maximum-column::       The Maximum Value for a Column
* example-maximum-row::          The Row Holding the Maximum of a Certain Column
* example-maximum-column-group::  Maximum of Column per Group
* example-maximum-column-group-row::  The Rows Holding the Group-wise Maximum of a Certain Column
* example-user-variables::       Using User-Defined Variables
* example-foreign-keys::         Using Foreign Keys
* searching-on-two-keys::        Searching on Two Keys
* calculating-days::             Calculating Visits Per Day
* example-auto-increment::       Using `AUTO_INCREMENT'

Here are examples of how to solve some common problems with MySQL.

Some of the examples use the table `shop' to hold the price of each
article (item number) for certain traders (dealers). Supposing that
each trader has a single fixed price per article, then (`article',
`dealer') is a primary key for the records.

Start the command-line tool *Note `mysql': mysql. and select a database:

     shell> mysql YOUR-DATABASE-NAME

(In most MySQL installations, you can use the database named `test').

You can create and populate the example table with these statements:

     CREATE TABLE shop (
         article INT(4) UNSIGNED ZEROFILL DEFAULT '0000' NOT NULL,
         dealer  CHAR(20)                 DEFAULT ''     NOT NULL,
         price   DOUBLE(16,2)             DEFAULT '0.00' NOT NULL,
         PRIMARY KEY(article, dealer));
     INSERT INTO shop VALUES
         (1,'A',3.45),(1,'B',3.99),(2,'A',10.99),(3,'B',1.45),
         (3,'C',1.69),(3,'D',1.25),(4,'D',19.95);

After issuing the statements, the table should have the following
contents:

     SELECT * FROM shop;

     +---------+--------+-------+
     | article | dealer | price |
     +---------+--------+-------+
     |    0001 | A      |  3.45 |
     |    0001 | B      |  3.99 |
     |    0002 | A      | 10.99 |
     |    0003 | B      |  1.45 |
     |    0003 | C      |  1.69 |
     |    0003 | D      |  1.25 |
     |    0004 | D      | 19.95 |
     +---------+--------+-------+


File: manual.info,  Node: example-maximum-column,  Next: example-maximum-row,  Prev: examples,  Up: examples

3.6.1 The Maximum Value for a Column
------------------------------------

`What is the highest item number?'

     SELECT MAX(article) AS article FROM shop;

     +---------+
     | article |
     +---------+
     |       4 |
     +---------+


File: manual.info,  Node: example-maximum-row,  Next: example-maximum-column-group,  Prev: example-maximum-column,  Up: examples

3.6.2 The Row Holding the Maximum of a Certain Column
-----------------------------------------------------

_Task: Find the number, dealer, and price of the most expensive
article._

This is easily done with a subquery:

     SELECT article, dealer, price
     FROM   shop
     WHERE  price=(SELECT MAX(price) FROM shop);

     +---------+--------+-------+
     | article | dealer | price |
     +---------+--------+-------+
     |    0004 | D      | 19.95 |
     +---------+--------+-------+

Other solutions are to use a `LEFT JOIN' or to sort all rows descending
by price and get only the first row using the MySQL-specific `LIMIT'
clause:

     SELECT s1.article, s1.dealer, s1.price
     FROM shop s1
     LEFT JOIN shop s2 ON s1.price < s2.price
     WHERE s2.article IS NULL;

     SELECT article, dealer, price
     FROM shop
     ORDER BY price DESC
     LIMIT 1;

*Note*:

If there were several most expensive articles, each with a price of
19.95, the `LIMIT' solution would show only one of them.


File: manual.info,  Node: example-maximum-column-group,  Next: example-maximum-column-group-row,  Prev: example-maximum-row,  Up: examples

3.6.3 Maximum of Column per Group
---------------------------------

_Task: Find the highest price per article._

     SELECT article, MAX(price) AS price
     FROM   shop
     GROUP BY article;

     +---------+-------+
     | article | price |
     +---------+-------+
     |    0001 |  3.99 |
     |    0002 | 10.99 |
     |    0003 |  1.69 |
     |    0004 | 19.95 |
     +---------+-------+


File: manual.info,  Node: example-maximum-column-group-row,  Next: example-user-variables,  Prev: example-maximum-column-group,  Up: examples

3.6.4 The Rows Holding the Group-wise Maximum of a Certain Column
-----------------------------------------------------------------

_Task: For each article, find the dealer or dealers with the most
expensive price._

This problem can be solved with a subquery like this one:

     SELECT article, dealer, price
     FROM   shop s1
     WHERE  price=(SELECT MAX(s2.price)
                   FROM shop s2
                   WHERE s1.article = s2.article);

     +---------+--------+-------+
     | article | dealer | price |
     +---------+--------+-------+
     |    0001 | B      |  3.99 |
     |    0002 | A      | 10.99 |
     |    0003 | C      |  1.69 |
     |    0004 | D      | 19.95 |
     +---------+--------+-------+

The preceding example uses a correlated subquery, which can be
inefficient (see *Note correlated-subqueries::). Other possibilities
for solving the problem are to use an uncorrelated subquery in the
`FROM' clause or a `LEFT JOIN'.

Uncorrelated subquery:

     SELECT s1.article, dealer, s1.price
     FROM shop s1
     JOIN (
       SELECT article, MAX(price) AS price
       FROM shop
       GROUP BY article) AS s2
       ON s1.article = s2.article AND s1.price = s2.price;

`LEFT JOIN':

     SELECT s1.article, s1.dealer, s1.price
     FROM shop s1
     LEFT JOIN shop s2 ON s1.article = s2.article AND s1.price < s2.price
     WHERE s2.article IS NULL;

The `LEFT JOIN' works on the basis that when `s1.price' is at its
maximum value, there is no `s2.price' with a greater value and the `s2'
rows values will be `NULL'. See *Note join::.


File: manual.info,  Node: example-user-variables,  Next: example-foreign-keys,  Prev: example-maximum-column-group-row,  Up: examples

3.6.5 Using User-Defined Variables
----------------------------------

You can employ MySQL user variables to remember results without having
to store them in temporary variables in the client. (See *Note
user-variables::.)

For example, to find the articles with the highest and lowest price you
can do this:

     mysql> SELECT @min_price:=MIN(price),@max_price:=MAX(price) FROM shop;
     mysql> SELECT * FROM shop WHERE price=@min_price OR price=@max_price;
     +---------+--------+-------+
     | article | dealer | price |
     +---------+--------+-------+
     |    0003 | D      |  1.25 |
     |    0004 | D      | 19.95 |
     +---------+--------+-------+

*Note*:

It is also possible to store the name of a database object such as a
table or a column in a user variable and then to use this variable in
an SQL statement; however, this requires the use of a prepared
statement. See *Note sql-syntax-prepared-statements::, for more
information.


File: manual.info,  Node: example-foreign-keys,  Next: searching-on-two-keys,  Prev: example-user-variables,  Up: examples

3.6.6 Using Foreign Keys
------------------------

In MySQL, `InnoDB' tables support checking of foreign key constraints.
See *Note innodb-storage-engine::, and *Note ansi-diff-foreign-keys::.

A foreign key constraint is not required merely to join two tables. For
storage engines other than `InnoDB', it is possible when defining a
column to use a `REFERENCES TBL_NAME(COL_NAME)' clause, which has no
actual effect, and _serves only as a memo or comment to you that the
column which you are currently defining is intended to refer to a
column in another table_. It is extremely important to realize when
using this syntax that:

   * MySQL does not perform any sort of `CHECK' to make sure that
     COL_NAME actually exists in TBL_NAME (or even that TBL_NAME itself
     exists).

   * MySQL does not perform any sort of action on TBL_NAME such as
     deleting rows in response to actions taken on rows in the table
     which you are defining; in other words, this syntax induces no `ON
     DELETE' or `ON UPDATE' behavior whatsoever. (Although you can
     write an `ON DELETE' or `ON UPDATE' clause as part of the
     `REFERENCES' clause, it is also ignored.)

   * This syntax creates a _column_; it does *not* create any sort of
     index or key.

You can use a column so created as a join column, as shown here:

     CREATE TABLE person (
         id SMALLINT UNSIGNED NOT NULL AUTO_INCREMENT,
         name CHAR(60) NOT NULL,
         PRIMARY KEY (id)
     );

     CREATE TABLE shirt (
         id SMALLINT UNSIGNED NOT NULL AUTO_INCREMENT,
         style ENUM('t-shirt', 'polo', 'dress') NOT NULL,
         color ENUM('red', 'blue', 'orange', 'white', 'black') NOT NULL,
         owner SMALLINT UNSIGNED NOT NULL REFERENCES person(id),
         PRIMARY KEY (id)
     );

     INSERT INTO person VALUES (NULL, 'Antonio Paz');

     SELECT @last := LAST_INSERT_ID();

     INSERT INTO shirt VALUES
     (NULL, 'polo', 'blue', @last),
     (NULL, 'dress', 'white', @last),
     (NULL, 't-shirt', 'blue', @last);

     INSERT INTO person VALUES (NULL, 'Lilliana Angelovska');

     SELECT @last := LAST_INSERT_ID();

     INSERT INTO shirt VALUES
     (NULL, 'dress', 'orange', @last),
     (NULL, 'polo', 'red', @last),
     (NULL, 'dress', 'blue', @last),
     (NULL, 't-shirt', 'white', @last);

     SELECT * FROM person;
     +----+---------------------+
     | id | name                |
     +----+---------------------+
     |  1 | Antonio Paz         |
     |  2 | Lilliana Angelovska |
     +----+---------------------+

     SELECT * FROM shirt;
     +----+---------+--------+-------+
     | id | style   | color  | owner |
     +----+---------+--------+-------+
     |  1 | polo    | blue   |     1 |
     |  2 | dress   | white  |     1 |
     |  3 | t-shirt | blue   |     1 |
     |  4 | dress   | orange |     2 |
     |  5 | polo    | red    |     2 |
     |  6 | dress   | blue   |     2 |
     |  7 | t-shirt | white  |     2 |
     +----+---------+--------+-------+

     SELECT s.* FROM person p INNER JOIN shirt s
        ON s.owner = p.id
      WHERE p.name LIKE 'Lilliana%'
        AND s.color <> 'white';

     +----+-------+--------+-------+
     | id | style | color  | owner |
     +----+-------+--------+-------+
     |  4 | dress | orange |     2 |
     |  5 | polo  | red    |     2 |
     |  6 | dress | blue   |     2 |
     +----+-------+--------+-------+

When used in this fashion, the `REFERENCES' clause is not displayed in
the output of *Note `SHOW CREATE TABLE': show-create-table. or *Note
`DESCRIBE': describe.:

     SHOW CREATE TABLE shirt\G
     *************************** 1. row ***************************
     Table: shirt
     Create Table: CREATE TABLE `shirt` (
     `id` smallint(5) unsigned NOT NULL auto_increment,
     `style` enum('t-shirt','polo','dress') NOT NULL,
     `color` enum('red','blue','orange','white','black') NOT NULL,
     `owner` smallint(5) unsigned NOT NULL,
     PRIMARY KEY  (`id`)
     ) ENGINE=MyISAM DEFAULT CHARSET=latin1

The use of `REFERENCES' in this way as a comment or `reminder' in a
column definition works with `MyISAM' tables.


File: manual.info,  Node: searching-on-two-keys,  Next: calculating-days,  Prev: example-foreign-keys,  Up: examples

3.6.7 Searching on Two Keys
---------------------------

An `OR' using a single key is well optimized, as is the handling of
`AND'.

The one tricky case is that of searching on two different keys combined
with `OR':

     SELECT field1_index, field2_index FROM test_table
     WHERE field1_index = '1' OR  field2_index = '1'

This case is optimized. See *Note index-merge-optimization::.

You can also solve the problem efficiently by using a *Note `UNION':
union. that combines the output of two separate *Note `SELECT': select.
statements.  See *Note union::.

Each *Note `SELECT': select. searches only one key and can be optimized:

     SELECT field1_index, field2_index
         FROM test_table WHERE field1_index = '1'
     UNION
     SELECT field1_index, field2_index
         FROM test_table WHERE field2_index = '1';


File: manual.info,  Node: calculating-days,  Next: example-auto-increment,  Prev: searching-on-two-keys,  Up: examples

3.6.8 Calculating Visits Per Day
--------------------------------

The following example shows how you can use the bit group functions to
calculate the number of days per month a user has visited a Web page.

     CREATE TABLE t1 (year YEAR(4), month INT(2) UNSIGNED ZEROFILL,
                  day INT(2) UNSIGNED ZEROFILL);
     INSERT INTO t1 VALUES(2000,1,1),(2000,1,20),(2000,1,30),(2000,2,2),
                 (2000,2,23),(2000,2,23);

The example table contains year-month-day values representing visits by
users to the page. To determine how many different days in each month
these visits occur, use this query:

     SELECT year,month,BIT_COUNT(BIT_OR(1<<day)) AS days FROM t1
            GROUP BY year,month;

Which returns:

     +------+-------+------+
     | year | month | days |
     +------+-------+------+
     | 2000 |    01 |    3 |
     | 2000 |    02 |    2 |
     +------+-------+------+

The query calculates how many different days appear in the table for
each year/month combination, with automatic removal of duplicate
entries.


File: manual.info,  Node: example-auto-increment,  Prev: calculating-days,  Up: examples

3.6.9 Using `AUTO_INCREMENT'
----------------------------

The `AUTO_INCREMENT' attribute can be used to generate a unique
identity for new rows:

     CREATE TABLE animals (
          id MEDIUMINT NOT NULL AUTO_INCREMENT,
          name CHAR(30) NOT NULL,
          PRIMARY KEY (id)
     );

     INSERT INTO animals (name) VALUES
         ('dog'),('cat'),('penguin'),
         ('lax'),('whale'),('ostrich');

     SELECT * FROM animals;

Which returns:

     +----+---------+
     | id | name    |
     +----+---------+
     |  1 | dog     |
     |  2 | cat     |
     |  3 | penguin |
     |  4 | lax     |
     |  5 | whale   |
     |  6 | ostrich |
     +----+---------+

No value was specified for the `AUTO_INCREMENT' column, so MySQL
assigned sequence numbers automatically. You can also explicitly assign
`NULL' or 0 to the column to generate sequence numbers.

You can retrieve the most recent `AUTO_INCREMENT' value with the
`LAST_INSERT_ID()' SQL function or the *Note `mysql_insert_id()':
mysql-insert-id. C API function. These functions are
connection-specific, so their return values are not affected by another
connection which is also performing inserts.

Use the smallest integer data type for the `AUTO_INCREMENT' column that
is large enough to hold the maximum sequence value you will need. When
the column reaches the upper limit of the data type, the next attempt to
generate a sequence number fails. Use the `UNSIGNED' attribute if
possible to allow a greater range. For example, if you use *Note
`TINYINT': integer-types, the maximum permissible sequence number is
127. For *Note `TINYINT UNSIGNED': integer-types, the maximum is 255.
See *Note integer-types:: for the ranges of all the integer types.

*Note*:

For a multiple-row insert, `LAST_INSERT_ID()' and *Note
`mysql_insert_id()': mysql-insert-id. actually return the
`AUTO_INCREMENT' key from the _first_ of the inserted rows. This enables
multiple-row inserts to be reproduced correctly on other servers in a
replication setup.

If the `AUTO_INCREMENT' column is part of multiple indexes, MySQL
generates sequence values using the index that begins with the
`AUTO_INCREMENT' column, if there is one. For example, if the `animals'
table contained indexes `PRIMARY KEY (grp, id)' and `INDEX (id)', MySQL
would ignore the `PRIMARY KEY' for generating sequence values. As a
result, the table would contain a single sequence, not a sequence per
`grp' value.

To start with an `AUTO_INCREMENT' value other than 1, set that value
with *Note `CREATE TABLE': create-table. or *Note `ALTER TABLE':
alter-table, like this:

     mysql> ALTER TABLE tbl AUTO_INCREMENT = 100;

* InnoDB Notes *

For `InnoDB' tables, be careful if you modify the column containing the
auto-increment value in the middle of a sequence of *Note `INSERT':
insert. statements.  For example, if you use an *Note `UPDATE': update.
statement to put a new, larger value in the auto-increment column, a
subsequent *Note `INSERT': insert. could encounter a `Duplicate entry'
error. The test whether an auto-increment value is already present
occurs if you do a *Note `DELETE': delete. followed by more *Note
`INSERT': insert. statements, or when you *Note `COMMIT': commit. the
transaction, but not after an *Note `UPDATE': update. statement.

* MyISAM Notes *

For `MyISAM' tables, you can specify `AUTO_INCREMENT' on a secondary
column in a multiple-column index. In this case, the generated value
for the `AUTO_INCREMENT' column is calculated as
`MAX(AUTO_INCREMENT_COLUMN) + 1 WHERE prefix=GIVEN-PREFIX'. This is
useful when you want to put data into ordered groups.

     CREATE TABLE animals (
         grp ENUM('fish','mammal','bird') NOT NULL,
         id MEDIUMINT NOT NULL AUTO_INCREMENT,
         name CHAR(30) NOT NULL,
         PRIMARY KEY (grp,id)
     ) ENGINE=MyISAM;

     INSERT INTO animals (grp,name) VALUES
         ('mammal','dog'),('mammal','cat'),
         ('bird','penguin'),('fish','lax'),('mammal','whale'),
         ('bird','ostrich');

     SELECT * FROM animals ORDER BY grp,id;

Which returns:

     +--------+----+---------+
     | grp    | id | name    |
     +--------+----+---------+
     | fish   |  1 | lax     |
     | mammal |  1 | dog     |
     | mammal |  2 | cat     |
     | mammal |  3 | whale   |
     | bird   |  1 | penguin |
     | bird   |  2 | ostrich |
     +--------+----+---------+

In this case (when the `AUTO_INCREMENT' column is part of a
multiple-column index), `AUTO_INCREMENT' values are reused if you
delete the row with the biggest `AUTO_INCREMENT' value in any group.
This happens even for `MyISAM' tables, for which `AUTO_INCREMENT'
values normally are not reused.

* Further Reading *

More information about `AUTO_INCREMENT' is available here:

   * How to assign the `AUTO_INCREMENT' attribute to a column: *Note
     create-table::, and *Note alter-table::.

   * How `AUTO_INCREMENT' behaves depending on the
     `NO_AUTO_VALUE_ON_ZERO' SQL mode: *Note server-sql-mode::.

   * How to use the `LAST_INSERT_ID()' function to find the row that
     contains the most recent `AUTO_INCREMENT' value: *Note
     information-functions::.

   * Setting the `AUTO_INCREMENT' value to be used: *Note
     server-system-variables::.

   * `AUTO_INCREMENT' and replication: *Note
     replication-features-auto-increment::.

   * Server-system variables related to `AUTO_INCREMENT'
     (`auto_increment_increment' and `auto_increment_offset') that can
     be used for replication: *Note server-system-variables::.


File: manual.info,  Node: apache,  Prev: examples,  Up: tutorial

3.7 Using MySQL with Apache
===========================

There are programs that let you authenticate your users from a MySQL
database and also let you write your log files into a MySQL table.

You can change the Apache logging format to be easily readable by MySQL
by putting the following into the Apache configuration file:

     LogFormat \
             "\"%h\",%{%Y%m%d%H%M%S}t,%>s,\"%b\",\"%{Content-Type}o\",  \
             \"%U\",\"%{Referer}i\",\"%{User-Agent}i\""

To load a log file in that format into MySQL, you can use a statement
something like this:

     LOAD DATA INFILE '/LOCAL/ACCESS_LOG' INTO TABLE TBL_NAME
     FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' ESCAPED BY '\\'

The named table should be created to have columns that correspond to
those that the `LogFormat' line writes to the log file.


File: manual.info,  Node: programs,  Next: server-administration,  Prev: tutorial,  Up: Top

4 MySQL Programs
****************

* Menu:

* programs-overview::            Overview of MySQL Programs
* programs-using::               Using MySQL Programs
* programs-server::              MySQL Server and Server-Startup Programs
* programs-installation::        MySQL Installation-Related Programs
* programs-client::              MySQL Client Programs
* programs-admin-utils::         MySQL Administrative and Utility Programs
* programs-development::         MySQL Program Development Utilities
* programs-miscellaneous::       Miscellaneous Programs

This chapter provides a brief overview of the MySQL command-line
programs provided by Oracle Corporation. It also discusses the general
syntax for specifying options when you run these programs.  Most
programs have options that are specific to their own operation, but the
option syntax is similar for all of them. Finally, the chapter provides
more detailed descriptions of individual programs, including which
options they recognize.


File: manual.info,  Node: programs-overview,  Next: programs-using,  Prev: programs,  Up: programs

4.1 Overview of MySQL Programs
==============================

There are many different programs in a MySQL installation. This section
provides a brief overview of them. Later sections provide a more
detailed description of each one, with the exception of MySQL Cluster
programs. Each program's description indicates its invocation syntax
and the options that it supports.  *Note mysql-cluster::, describes
programs specific to MySQL Cluster.

Most MySQL distributions include all of these programs, except for
those programs that are platform-specific. (For example, the server
startup scripts are not used on Windows.) The exception is that RPM
distributions are more specialized. There is one RPM for the server,
another for client programs, and so forth. If you appear to be missing
one or more programs, see *Note installing::, for information on types
of distributions and what they contain. It may be that you have a
distribution that does not include all programs and you need to install
an additional package.

Each MySQL program takes many different options. Most programs provide
a `--help' option that you can use to get a description of the
program's different options. For example, try *Note `mysql --help':
mysql.

You can override default option values for MySQL programs by specifying
options on the command line or in an option file. See *Note
programs-using::, for general information on invoking programs and
specifying program options.

The MySQL server, *Note `mysqld': mysqld, is the main program that does
most of the work in a MySQL installation. The server is accompanied by
several related scripts that assist you in starting and stopping the
server:

   * *Note `mysqld': mysqld.

     The SQL daemon (that is, the MySQL server). To use client
     programs, *Note `mysqld': mysqld. must be running, because clients
     gain access to databases by connecting to the server.  See *Note
     mysqld::.

   * *Note `mysqld_safe': mysqld-safe.

     A server startup script. *Note `mysqld_safe': mysqld-safe.
     attempts to start *Note `mysqld': mysqld. See *Note mysqld-safe::.

   * *Note `mysql.server': mysql-server.

     A server startup script. This script is used on systems that use
     System V-style run directories containing scripts that start
     system services for particular run levels. It invokes *Note
     `mysqld_safe': mysqld-safe. to start the MySQL server. See *Note
     mysql-server::.

   * *Note `mysqld_multi': mysqld-multi.

     A server startup script that can start or stop multiple servers
     installed on the system. See *Note mysqld-multi::.

Several programs perform setup operations during MySQL installation or
upgrading:

   * *Note `comp_err': comp-err.

     This program is used during the MySQL build/installation process.
     It compiles error message files from the error source files. See
     *Note comp-err::.

   * *Note `mysql_install_db': mysql-install-db.

     This script creates the MySQL database and initializes the grant
     tables with default privileges. It is usually executed only once,
     when first installing MySQL on a system. See *Note
     mysql-install-db::, *Note unix-postinstallation::, and *Note
     mysql-install-db::.

   * *Note `mysql_plugin': mysql-plugin.

     This program configures MySQL server plugins. See *Note
     mysql-plugin::.

   * *Note `mysql_secure_installation': mysql-secure-installation.

     This program enables you to improve the security of your MySQL
     installation. SQL. See *Note mysql-secure-installation::.

   * *Note `mysql_tzinfo_to_sql': mysql-tzinfo-to-sql.

     This program loads the time zone tables in the `mysql' database
     using the contents of the host system _zoneinfo_ database (the set
     of files describing time zones). SQL. See *Note
     mysql-tzinfo-to-sql::.

   * *Note `mysql_upgrade': mysql-upgrade.

     This program is used after a MySQL upgrade operation. It checks
     tables for incompatibilities and repairs them if necessary, and
     updates the grant tables with any changes that have been made in
     newer versions of MySQL. See *Note mysql-upgrade::.

MySQL client programs that connect to the MySQL server:

   * *Note `mysql': mysql.

     The command-line tool for interactively entering SQL statements or
     executing them from a file in batch mode. See *Note mysql::.

   * *Note `mysqladmin': mysqladmin.

     A client that performs administrative operations, such as creating
     or dropping databases, reloading the grant tables, flushing tables
     to disk, and reopening log files.  *Note `mysqladmin': mysqladmin.
     can also be used to retrieve version, process, and status
     information from the server. See *Note mysqladmin::.

   * *Note `mysqlcheck': mysqlcheck.

     A table-maintenance client that checks, repairs, analyzes, and
     optimizes tables. See *Note mysqlcheck::.

   * *Note `mysqldump': mysqldump.

     A client that dumps a MySQL database into a file as SQL, text, or
     XML. See *Note mysqldump::.

   * *Note `mysqlimport': mysqlimport.

     A client that imports text files into their respective tables
     using *Note `LOAD DATA INFILE': load-data. See *Note mysqlimport::.

   * *Note `mysqlshow': mysqlshow.

     A client that displays information about databases, tables,
     columns, and indexes. See *Note mysqlshow::.

   * *Note `mysqlslap': mysqlslap.

     A client that is designed to emulate client load for a MySQL
     server and report the timing of each stage. It works as if
     multiple clients are accessing the server. See *Note mysqlslap::.

MySQL administrative and utility programs:

   * *Note `innochecksum': innochecksum.

     An offline `InnoDB' offline file checksum utility. See *Note
     innochecksum::.

   * *Note `myisam_ftdump': myisam-ftdump.

     A utility that displays information about full-text indexes in
     `MyISAM' tables. See *Note myisam-ftdump::.

   * *Note `myisamchk': myisamchk.

     A utility to describe, check, optimize, and repair `MyISAM'
     tables. See *Note myisamchk::.

   * *Note `myisamlog': myisamlog.

     A utility that processes the contents of a `MyISAM' log file. See
     *Note myisamlog::.

   * *Note `myisampack': myisampack.

     A utility that compresses `MyISAM' tables to produce smaller
     read-only tables. See *Note myisampack::.

   * *Note `mysqlaccess': mysqlaccess.

     A script that checks the access privileges for a host name, user
     name, and database combination. See *Note mysqlaccess::.

   * *Note `mysqlbinlog': mysqlbinlog.

     A utility for reading statements from a binary log. The log of
     executed statements contained in the binary log files can be used
     to help recover from a crash. See *Note mysqlbinlog::.

   * *Note `mysqldumpslow': mysqldumpslow.

     A utility to read and summarize the contents of a slow query log.
     See *Note mysqldumpslow::.

   * *Note `mysqlhotcopy': mysqlhotcopy.

     A utility that quickly makes backups of `MyISAM' tables while the
     server is running.  See *Note mysqlhotcopy::.

   * *Note `mysql_convert_table_format': mysql-convert-table-format.

     A utility that converts tables in a database to use a given
     storage engine. See *Note mysql-convert-table-format::.

   * *Note `mysql_find_rows': mysql-find-rows.

     A utility that reads files containing SQL statements (such as
     update logs) and extracts statements that match a given regular
     expression. See *Note mysql-find-rows::.

   * *Note `mysql_fix_extensions': mysql-fix-extensions.

     A utility that converts the extensions for `MyISAM' table files to
     lowercase. This can be useful after transferring the files from a
     system with case-insensitive file names to a system with
     case-sensitive file names. See *Note mysql-fix-extensions::.

   * *Note `mysql_setpermission': mysql-setpermission.

     A utility for interactively setting permissions in the MySQL grant
     tables. See *Note mysql-setpermission::.

   * *Note `mysql_waitpid': mysql-waitpid.

     A utility that kills the process with a given process ID. See
     *Note mysql-waitpid::.

   * *Note `mysql_zap': mysql-zap.

     A utility that kills processes that match a pattern. See *Note
     mysql-zap::.

MySQL program-development utilities:

   * *Note `msql2mysql': msql2mysql.

     A shell script that converts `mSQL' programs to MySQL. It doesn't
     handle every case, but it gives a good start when converting. See
     *Note msql2mysql::.

   * *Note `mysql_config': mysql-config.

     A shell script that produces the option values needed when
     compiling MySQL programs. See *Note mysql-config::.

   * *Note `my_print_defaults': my-print-defaults.

     A utility that shows which options are present in option groups of
     option files. See *Note my-print-defaults::.

   * *Note `resolve_stack_dump': resolve-stack-dump.

     A utility program that resolves a numeric stack trace dump to
     symbols. See *Note resolve-stack-dump::.

Miscellaneous utilities:

   * *Note `perror': perror.

     A utility that displays the meaning of system or MySQL error
     codes. See *Note perror::.

   * *Note `replace': replace-utility.

     A utility program that performs string replacement in the input
     text. See *Note replace-utility::.

   * *Note `resolveip': resolveip.

     A utility program that resolves a host name to an IP address or
     vice versa. See *Note resolveip::.

Oracle Corporation also provides the *Note MySQL Workbench: workbench.
GUI tool, which is used to administer MySQL servers and databases, to
create, execute, and evaluate queries, and to migrate schemas and data
from other relational database management systems for use with MySQL.
Additional GUI tools include *Note MySQL Notifier for Microsoft
Windows: windows-notifier.  *Note MySQL for Excel: mysql-for-excel.

MySQL client programs that communicate with the server using the MySQL
client/server library use the following environment variables.

This table describes environment variables used by MySQL client
programs that communicate with the server using the MySQL client/server
library.

Environment        Meaning
Variable           
`MYSQL_UNIX_PORT'  The default Unix socket file; used for connections to
                   `localhost'
`MYSQL_TCP_PORT'   The default port number; used for TCP/IP connections
`MYSQL_PWD'        The default password
`MYSQL_DEBUG'      Debug trace options when debugging
`TMPDIR'           The directory where temporary tables and files are
                   created

For a full list of environment variables used by MySQL programs, see
*Note environment-variables::.

Use of `MYSQL_PWD' is insecure. See *Note password-security-user::.


File: manual.info,  Node: programs-using,  Next: programs-server,  Prev: programs-overview,  Up: programs

4.2 Using MySQL Programs
========================

* Menu:

* invoking-programs::            Invoking MySQL Programs
* connecting::                   Connecting to the MySQL Server
* program-options::              Specifying Program Options
* setting-environment-variables::  Setting Environment Variables


File: manual.info,  Node: invoking-programs,  Next: connecting,  Prev: programs-using,  Up: programs-using

4.2.1 Invoking MySQL Programs
-----------------------------

To invoke a MySQL program from the command line (that is, from your
shell or command prompt), enter the program name followed by any
options or other arguments needed to instruct the program what you want
it to do. The following commands show some sample program invocations.
``shell>'' represents the prompt for your command interpreter; it is
not part of what you type. The particular prompt you see depends on your
command interpreter. Typical prompts are `$' for `sh', `ksh', or
`bash', `%' for `csh' or `tcsh', and `C:\>' for the Windows
`command.com' or `cmd.exe' command interpreters.

     shell> mysql --user=root test
     shell> mysqladmin extended-status variables
     shell> mysqlshow --help
     shell> mysqldump -u root personnel

Arguments that begin with a single or double dash (``-'', ``--'')
specify program options.  Options typically indicate the type of
connection a program should make to the server or affect its
operational mode. Option syntax is described in *Note program-options::.

Nonoption arguments (arguments with no leading dash) provide additional
information to the program. For example, the *Note `mysql': mysql.
program interprets the first nonoption argument as a database name, so
the command `mysql --user=root test' indicates that you want to use the
`test' database.

Later sections that describe individual programs indicate which options
a program supports and describe the meaning of any additional nonoption
arguments.

Some options are common to a number of programs. The most frequently
used of these are the `--host' (or `-h'), `--user' (or `-u'), and
`--password' (or `-p') options that specify connection parameters.
They indicate the host where the MySQL server is running, and the user
name and password of your MySQL account. All MySQL client programs
understand these options; they enable you to specify which server to
connect to and the account to use on that server.  Other connection
options are `--port' (or `-P') to specify a TCP/IP port number and
`--socket' (or `-S') to specify a Unix socket file on Unix (or named
pipe name on Windows). For more information on options that specify
connection options, see *Note connecting::.

You may find it necessary to invoke MySQL programs using the path name
to the `bin' directory in which they are installed. This is likely to
be the case if you get a `program not found' error whenever you attempt
to run a MySQL program from any directory other than the `bin'
directory. To make it more convenient to use MySQL, you can add the
path name of the `bin' directory to your `PATH' environment variable
setting. That enables you to run a program by typing only its name, not
its entire path name. For example, if *Note `mysql': mysql. is
installed in `/usr/local/mysql/bin', you can run the program by
invoking it as *Note `mysql': mysql, and it is not necessary to invoke
it as `/usr/local/mysql/bin/mysql'.

Consult the documentation for your command interpreter for instructions
on setting your `PATH' variable. The syntax for setting environment
variables is interpreter-specific.  (Some information is given in *Note
setting-environment-variables::.) After modifying your `PATH' setting,
open a new console window on Windows or log in again on Unix so that
the setting goes into effect.


File: manual.info,  Node: connecting,  Next: program-options,  Prev: invoking-programs,  Up: programs-using

4.2.2 Connecting to the MySQL Server
------------------------------------

For a client program to be able to connect to the MySQL server, it must
use the proper connection parameters, such as the name of the host
where the server is running and the user name and password of your
MySQL account. Each connection parameter has a default value, but you
can override them as necessary using program options specified either
on the command line or in an option file.

The examples here use the *Note `mysql': mysql. client program, but the
principles apply to other clients such as *Note `mysqldump': mysqldump,
*Note `mysqladmin': mysqladmin, or *Note `mysqlshow': mysqlshow.

This command invokes *Note `mysql': mysql. without specifying any
connection parameters explicitly:

     shell> mysql

Because there are no parameter options, the default values apply:

   * The default host name is `localhost'. On Unix, this has a special
     meaning, as described later.

   * The default user name is `ODBC' on Windows or your Unix login name
     on Unix.

   * No password is sent if neither `-p' nor `--password' is given.

   * For *Note `mysql': mysql, the first nonoption argument is taken as
     the name of the default database. If there is no such option,
     *Note `mysql': mysql. does not select a default database.

To specify the host name and user name explicitly, as well as a
password, supply appropriate options on the command line:

     shell> mysql --host=localhost --user=myname --password=mypass mydb
     shell> mysql -h localhost -u myname -pmypass mydb

For password options, the password value is optional:

   * If you use a `-p' or `--password' option and specify the password
     value, there must be _no space_ between `-p' or `--password=' and
     the password following it.

   * If you use a `-p' or `--password' option but do not specify the
     password value, the client program prompts you to enter the
     password. The password is not displayed as you enter it. This is
     more secure than giving the password on the command line. Other
     users on your system may be able to see a password specified on
     the command line by executing a command such as `ps auxw'. See
     *Note password-security-user::.

As just mentioned, including the password value on the command line can
be a security risk. To avoid this problem, specify the `--password' or
`-p' option without any following password value:

     shell> mysql --host=localhost --user=myname --password mydb
     shell> mysql -h localhost -u myname -p mydb

When the password option has no password value, the client program
prints a prompt and waits for you to enter the password. (In these
examples, `mydb' is _not_ interpreted as a password because it is
separated from the preceding password option by a space.)

On some systems, the library routine that MySQL uses to prompt for a
password automatically limits the password to eight characters.  That
is a problem with the system library, not with MySQL.  Internally,
MySQL does not have any limit for the length of the password. To work
around the problem, change your MySQL password to a value that is eight
or fewer characters long, or put your password in an option file.

On Unix, MySQL programs treat the host name `localhost' specially, in a
way that is likely different from what you expect compared to other
network-based programs. For connections to `localhost', MySQL programs
attempt to connect to the local server by using a Unix socket file.
This occurs even if a `--port' or `-P' option is given to specify a
port number. To ensure that the client makes a TCP/IP connection to the
local server, use `--host' or `-h' to specify a host name value of
`127.0.0.1', or the IP address or name of the local server. You can
also specify the connection protocol explicitly, even for `localhost',
by using the `--protocol=TCP' option. For example:

     shell> mysql --host=127.0.0.1
     shell> mysql --protocol=TCP

The `--protocol' option enables you to establish a particular type of
connection even when the other options would normally default to some
other protocol.

If the server is configured to accept IPv6 connections, client can
connect over IPv6 using `--host=::1'. See *Note ipv6-support::.

On Windows, you can force a MySQL client to use a named-pipe connection
by specifying the `--pipe' or `--protocol=PIPE' option, or by
specifying `.' (period) as the host name. If named-pipe connections are
not enabled, an error occurs. Use the `--socket' option to specify the
name of the pipe if you do not want to use the default pipe name.

Connections to remote servers always use TCP/IP. This command connects
to the server running on `remote.example.com' using the default port
number (3306):

     shell> mysql --host=remote.example.com

To specify a port number explicitly, use the `--port' or `-P' option:

     shell> mysql --host=remote.example.com --port=13306

You can specify a port number for connections to a local server, too.
However, as indicated previously, connections to `localhost' on Unix
will use a socket file by default. You will need to force a TCP/IP
connection as already described or any option that specifies a port
number will be ignored.

For this command, the program uses a socket file on Unix and the
`--port' option is ignored:

     shell> mysql --port=13306 --host=localhost

To cause the port number to be used, invoke the program in either of
these ways:

     shell> mysql --port=13306 --host=127.0.0.1
     shell> mysql --port=13306 --protocol=TCP

The following list summarizes the options that can be used to control
how client programs connect to the server:

   *  `--host=HOST_NAME', `-h HOST_NAME'

     The host where the server is running. The default value is
     `localhost'.

   *  `--password[=PASS_VAL]', `-p[PASS_VAL]'

     The password of the MySQL account. As described earlier, the
     password value is optional, but if given, there must be _no space_
     between `-p' or `--password=' and the password following it. The
     default is to send no password.

   *  `--pipe', `-W'

     On Windows, connect to the server using a named pipe. The server
     must be started with the `--enable-named-pipe' option to enable
     named-pipe connections.

   *  `--port=PORT_NUM', `-P PORT_NUM'

     The port number to use for the connection, for connections made
     using TCP/IP. The default port number is 3306.

   *  `--protocol={TCP|SOCKET|PIPE|MEMORY}'

     This option explicitly specifies a protocol to use for connecting
     to the server. It is useful when the other connection parameters
     normally would cause a protocol to be used other than the one you
     want. For example, connections on Unix to `localhost' are made
     using a Unix socket file by default:

          shell> mysql --host=localhost

     To force a TCP/IP connection to be used instead, specify a
     `--protocol' option:

          shell> mysql --host=localhost --protocol=TCP

     The following table shows the permissible `--protocol' option
     values and indicates the platforms on which each value may be
     used. The values are not case sensitive.

     This table lists permissible `--protocol' option values, the
     connection protocol for each value, and the platforms on which
     each value may be used.

     `--protocol'  Connection Protocol                Permissible
     Value                                            Operating Systems
     `TCP'         TCP/IP connection to local or      All
                   remote server                      
     `SOCKET'      Unix socket file connection to     Unix only
                   local server                       
     `PIPE'        Named-pipe connection to local or  Windows only
                   remote server                      
     `MEMORY'      Shared-memory connection to local  Windows only
                   server                             

   *  `--shared-memory-base-name=NAME'

     On Windows, the shared-memory name to use, for connections made
     using shared memory to a local server. The default value is
     `MYSQL'. The shared-memory name is case sensitive.

     The server must be started with the `--shared-memory' option to
     enable shared-memory connections.

   *  `--socket=FILE_NAME', `-S FILE_NAME'

     On Unix, the name of the Unix socket file to use, for connections
     made using a named pipe to a local server. The default Unix socket
     file name is `/tmp/mysql.sock'.

     On Windows, the name of the named pipe to use, for connections to
     a local server. The default Windows pipe name is `MySQL'. The pipe
     name is not case sensitive.

     The server must be started with the `--enable-named-pipe' option to
     enable named-pipe connections.

   * `--ssl*'

     Options that begin with `--ssl' are used for establishing a secure
     connection to the server using SSL, if the server is configured
     with SSL support. For details, see *Note ssl-options::.

   *  `--user=USER_NAME', `-u USER_NAME'

     The user name of the MySQL account you want to use. The default
     user name is `ODBC' on Windows or your Unix login name on Unix.

It is possible to specify different default values to be used when you
make a connection so that you need not enter them on the command line
each time you invoke a client program. This can be done in a couple of
ways:

   * You can specify connection parameters in the `[client]' section of
     an option file. The relevant section of the file might look like
     this:

          [client]
          host=HOST_NAME
          user=USER_NAME
          password=YOUR_PASS

     *Note option-files::, discusses option files further.

   * You can specify some connection parameters using environment
     variables. The host can be specified for *Note `mysql': mysql.
     using `MYSQL_HOST'.  The MySQL user name can be specified using
     `USER' (this is for Windows only). The password can be specified
     using `MYSQL_PWD', although this is insecure; see *Note
     password-security-user::. For a list of variables, see *Note
     environment-variables::.


File: manual.info,  Node: program-options,  Next: setting-environment-variables,  Prev: connecting,  Up: programs-using

4.2.3 Specifying Program Options
--------------------------------

* Menu:

* command-line-options::         Using Options on the Command Line
* option-modifiers::             Program Option Modifiers
* option-files::                 Using Option Files
* option-file-options::          Command-Line Options that Affect Option-File Handling
* program-variables::            Using Options to Set Program Variables
* option-defaults-equals::       Option Defaults, Options Expecting Values, and the `=' Sign

There are several ways to specify options for MySQL programs:

   * List the options on the command line following the program name.
     This is common for options that apply to a specific invocation of
     the program.

   * List the options in an option file that the program reads when it
     starts. This is common for options that you want the program to
     use each time it runs.

   * List the options in environment variables (see *Note
     setting-environment-variables::). This method is useful for
     options that you want to apply each time the program runs. In
     practice, option files are used more commonly for this purpose,
     but *Note multiple-unix-servers::, discusses one situation in
     which environment variables can be very helpful. It describes a
     handy technique that uses such variables to specify the TCP/IP
     port number and Unix socket file for the server and for client
     programs.

Options are processed in order, so if an option is specified multiple
times, the last occurrence takes precedence. The following command
causes *Note `mysql': mysql. to connect to the server running on
`localhost':

     shell> mysql -h example.com -h localhost

If conflicting or related options are given, later options take
precedence over earlier options. The following command runs *Note
`mysql': mysql. in `no column names' mode:

     shell> mysql --column-names --skip-column-names

MySQL programs determine which options are given first by examining
environment variables, then by reading option files, and then by
checking the command line. This means that environment variables have
the lowest precedence and command-line options the highest.

You can take advantage of the way that MySQL programs process options
by specifying default option values for a program in an option file.
That enables you to avoid typing them each time you run the program
while enabling you to override the defaults if necessary by using
command-line options.

An option can be specified by writing it in full or as any unambiguous
prefix. For example, the `--compress' option can be given to *Note
`mysqldump': mysqldump. as `--compr', but not as `--comp' because the
latter is ambiguous:

     shell> mysqldump --comp
     mysqldump: ambiguous option '--comp' (compatible, compress)

Be aware that the use of option prefixes can cause problems in the
event that new options are implemented for a program. A prefix that is
unambiguous now might become ambiguous in the future.

*Note*:

As of MySQL 5.5.33, unambiguous prefixes are deprecated. If an
unambiguous prefix is given, a warning occurs to provide feedback.
Option prefixes are no longer supported in MySQL 5.7; only full options
are accepted.


File: manual.info,  Node: command-line-options,  Next: option-modifiers,  Prev: program-options,  Up: program-options

4.2.3.1 Using Options on the Command Line
.........................................

Program options specified on the command line follow these rules:

   * Options are given after the command name.

   * An option argument begins with one dash or two dashes, depending
     on whether it is a short form or long form of the option name.
     Many options have both short and long forms.  For example, `-?'
     and `--help' are the short and long forms of the option that
     instructs a MySQL program to display its help message.

   * Option names are case sensitive. `-v' and `-V' are both legal and
     have different meanings. (They are the corresponding short forms
     of the `--verbose' and `--version' options.)

   * Some options take a value following the option name. For example,
     `-h localhost' or `--host=localhost' indicate the MySQL server
     host to a client program. The option value tells the program the
     name of the host where the MySQL server is running.

   * For a long option that takes a value, separate the option name and
     the value by an ``='' sign. For a short option that takes a value,
     the option value can immediately follow the option letter, or
     there can be a space between: `-hlocalhost' and `-h localhost' are
     equivalent. An exception to this rule is the option for specifying
     your MySQL password. This option can be given in long form as
     `--password=PASS_VAL' or as `--password'. In the latter case (with
     no password value given), the program prompts you for the
     password. The password option also may be given in short form as
     `-pPASS_VAL' or as `-p'. However, for the short form, if the
     password value is given, it must follow the option letter with _no
     intervening space_. The reason for this is that if a space follows
     the option letter, the program has no way to tell whether a
     following argument is supposed to be the password value or some
     other kind of argument. Consequently, the following two commands
     have two completely different meanings:

          shell> mysql -ptest
          shell> mysql -p test

     The first command instructs *Note `mysql': mysql. to use a
     password value of `test', but specifies no default database. The
     second instructs *Note `mysql': mysql. to prompt for the password
     value and to use `test' as the default database.

   * Within option names, dash (``-'') and underscore (``_'') may be
     used interchangeably. For example, `--skip-grant-tables' and
     `--skip_grant_tables' are equivalent. (However, the leading dashes
     cannot be given as underscores.)

   * For options that take a numeric value, the value can be given with
     a suffix of `K', `M', or `G' (either uppercase or lowercase) to
     indicate a multiplier of 1024, 1024^2 or 1024^3. For example, the
     following command tells *Note `mysqladmin': mysqladmin. to ping the
     server 1024 times, sleeping 10 seconds between each ping:

          mysql> mysqladmin --count=1K --sleep=10 ping

Option values that contain spaces must be quoted when given on the
command line. For example, the `--execute' (or `-e') option can be used
with *Note `mysql': mysql. to pass SQL statements to the server. When
this option is used, *Note `mysql': mysql. executes the statements in
the option value and exits. The statements must be enclosed by quotation
marks. For example, you can use the following command to obtain a list
of user accounts:

     mysql> mysql -u root -p --execute="SELECT User, Host FROM mysql.user"
     Enter password: ******
     +------+-----------+
     | User | Host      |
     +------+-----------+
     |      | gigan     |
     | root | gigan     |
     |      | localhost |
     | jon  | localhost |
     | root | localhost |
     +------+-----------+
     shell>

Note that the long form (`--execute') is followed by an equal sign
(`=').

If you wish to use quoted values within a statement, you will either
need to escape the inner quotation marks, or use a different type of
quotation marks within the statement from those used to quote the
statement itself. The capabilities of your command processor dictate
your choices for whether you can use single or double quotation marks
and the syntax for escaping quote characters. For example, if your
command processor supports quoting with single or double quotation
marks, you can use double quotation marks around the statement, and
single quotation marks for any quoted values within the statement.

Multiple SQL statements may be passed in the option value on the
command line, separated by semicolons:

     shell> mysql -u root -p -e "SELECT VERSION();SELECT NOW()"
     Enter password: ******
     +-----------------+
     | VERSION()       |
     +-----------------+
     | 5.1.5-alpha-log |
     +-----------------+
     +---------------------+
     | NOW()               |
     +---------------------+
     | 2006-01-05 21:19:04 |
     +---------------------+


File: manual.info,  Node: option-modifiers,  Next: option-files,  Prev: command-line-options,  Up: program-options

4.2.3.2 Program Option Modifiers
................................

Some options are `boolean' and control behavior that can be turned on
or off. For example, the *Note `mysql': mysql. client supports a
`--column-names' option that determines whether or not to display a row
of column names at the beginning of query results. By default, this
option is enabled. However, you may want to disable it in some
instances, such as when sending the output of *Note `mysql': mysql. into
another program that expects to see only data and not an initial header
line.

To disable column names, you can specify the option using any of these
forms:

     --disable-column-names
     --skip-column-names
     --column-names=0

The `--disable' and `--skip' prefixes and the `=0' suffix all have the
same effect: They turn the option off.

The `enabled' form of the option may be specified in any of these ways:

     --column-names
     --enable-column-names
     --column-names=1

As of MySQL 5.5.10, the values `ON', `TRUE', `OFF', and `FALSE' are
also recognized for boolean options (not case sensitive).

If an option is prefixed by `--loose', a program does not exit with an
error if it does not recognize the option, but instead issues only a
warning:

     shell> mysql --loose-no-such-option
     mysql: WARNING: unknown option '--no-such-option'

The `--loose' prefix can be useful when you run programs from multiple
installations of MySQL on the same machine and list options in an
option file, An option that may not be recognized by all versions of a
program can be given using the `--loose' prefix (or `loose' in an
option file). Versions of the program that recognize the option process
it normally, and versions that do not recognize it issue a warning and
ignore it.

*Note `mysqld': mysqld. enables a limit to be placed on how large
client programs can set dynamic system variables. To do this, use a
`--maximum' prefix with the variable name. For example,
`--maximum-query_cache_size=4M' prevents any client from making the
query cache size larger than 4MB.


File: manual.info,  Node: option-files,  Next: option-file-options,  Prev: option-modifiers,  Up: program-options

4.2.3.3 Using Option Files
..........................

Most MySQL programs can read startup options from option files (also
sometimes called configuration files). Option files provide a
convenient way to specify commonly used options so that they need not
be entered on the command line each time you run a program. For the
MySQL server, MySQL provides a number of *Note preconfigured option
files: server-configuration-defaults.

To determine whether a program reads option files, invoke it with the
`--help' option. (For *Note `mysqld': mysqld, use `--verbose' and
`--help'.) If the program reads option files, the help message
indicates which files it looks for and which option groups it
recognizes.

*Note*:

Option files used with MySQL Cluster programs are covered in *Note
mysql-cluster-configuration::.

On Windows, MySQL programs read startup options from the following
files, in the specified order (top items are used first).

This table lists file names on Windows operating systems where MySQL
programs read startup options. The purpose of each file is described.

File Name              Purpose
``%PROGRAMDATA%'\MySQL\MySQLGlobal options
Server 5.5\my.ini',    
``%PROGRAMDATA%'\MySQL\MySQL
Server 5.5\my.cnf'     
``%WINDIR%'\my.ini',   Global options
``%WINDIR%'\my.cnf'    
`C:\my.ini',           Global options
`C:\my.cnf'            
`INSTALLDIR\my.ini',   Global options
`INSTALLDIR\my.cnf'    
`defaults-extra-file'  The file specified with
                       `--defaults-extra-file=PATH', if any

`%PROGRAMDATA%' represents the file system directory that contains
application data for all users on the host. This path defaults to
`C:\ProgramData' on Microsoft Windows Vista and greater, and
`C:\Documents and Settings\All Users\Application Data' on older
versions of Microsoft Windows.

`%WINDIR%' represents the location of your Windows directory. This is
commonly `C:\WINDOWS'. You can determine its exact location from the
value of the `WINDIR' environment variable using the following command:

     C:\> echo %WINDIR%

INSTALLDIR represents the MySQL installation directory. This is
typically `C:\PROGRAMDIR\MySQL\MySQL 5.5 Server' where PROGRAMDIR
represents the programs directory (usually `Program Files' on
English-language versions of Windows), when MySQL 5.5 has been
installed using the installation and configuration wizards. See *Note
mysql-installer::.

On Unix, Linux and Mac OS X, MySQL programs read startup options from
the following files, in the specified order (top items are used first).

This table lists file names on Unix, Linux and Mac OS X operating
systems where MySQL programs read startup options.  The purpose of each
file is described.

File Name              Purpose
`/etc/my.cnf'          Global options
`/etc/mysql/my.cnf'    Global options
`SYSCONFDIR/my.cnf'    Global options
`$MYSQL_HOME/my.cnf'   Server-specific options
`defaults-extra-file'  The file specified with
                       `--defaults-extra-file=PATH', if any
`~/.my.cnf'            User-specific options

`~' represents the current user's home directory (the value of `$HOME').

SYSCONFDIR represents the directory specified with the `SYSCONFDIR'
option to `CMake' when MySQL was built. By default, this is the `etc'
directory located under the compiled-in installation directory.

`MYSQL_HOME' is an environment variable containing the path to the
directory in which the server-specific `my.cnf' file resides. If
`MYSQL_HOME' is not set and you start the server using the *Note
`mysqld_safe': mysqld-safe. program, *Note `mysqld_safe': mysqld-safe.
attempts to set `MYSQL_HOME' as follows:

   * Let BASEDIR and DATADIR represent the path names of the MySQL base
     directory and data directory, respectively.

   * If there is a `my.cnf' file in DATADIR but not in BASEDIR, *Note
     `mysqld_safe': mysqld-safe. sets `MYSQL_HOME' to DATADIR.

   * Otherwise, if `MYSQL_HOME' is not set and there is no `my.cnf'
     file in DATADIR, *Note `mysqld_safe': mysqld-safe. sets
     `MYSQL_HOME' to BASEDIR.

In MySQL 5.5, use of DATADIR as the location for `my.cnf' is deprecated.

Typically, DATADIR is `/usr/local/mysql/data' for a binary installation
or `/usr/local/var' for a source installation. Note that this is the
data directory location that was specified at configuration time, not
the one specified with the `--datadir' option when *Note `mysqld':
mysqld. starts. Use of `--datadir' at runtime has no effect on where
the server looks for option files, because it looks for them before
processing any options.

MySQL looks for option files in the order just described and reads any
that exist. If an option file that you want to use does not exist,
create it with a plain text editor.

If multiple instances of a given option are found, the last instance
takes precedence. There is one exception: For *Note `mysqld': mysqld,
the _first_ instance of the `--user' option is used as a security
precaution, to prevent a user specified in an option file from being
overridden on the command line.

*Note*:

On Unix platforms, MySQL ignores configuration files that are
world-writable. This is intentional as a security measure.

Any long option that may be given on the command line when running a
MySQL program can be given in an option file as well.  To get the list
of available options for a program, run it with the `--help' option.

The syntax for specifying options in an option file is similar to
command-line syntax (see *Note command-line-options::). However, in an
option file, you omit the leading two dashes from the option name and
you specify only one option per line. For example, `--quick' and
`--host=localhost' on the command line should be specified as `quick'
and `host=localhost' on separate lines in an option file. To specify an
option of the form `--loose-OPT_NAME' in an option file, write it as
`loose-OPT_NAME'.

Empty lines in option files are ignored. Nonempty lines can take any of
the following forms:

   * `#COMMENT', `;COMMENT'

     Comment lines start with ``#'' or ``;''. A ``#'' comment can start
     in the middle of a line as well.

   * `[GROUP]'

     GROUP is the name of the program or group for which you want to
     set options. After a group line, any option-setting lines apply to
     the named group until the end of the option file or another group
     line is given. Option group names are not case sensitive.

   * `OPT_NAME'

     This is equivalent to `--OPT_NAME' on the command line.

   * `OPT_NAME=VALUE'

     This is equivalent to `--OPT_NAME=VALUE' on the command line. In
     an option file, you can have spaces around the ``='' character,
     something that is not true on the command line. You can optionally
     enclose the value within single quotation marks or double
     quotation marks, which is useful if the value contains a ``#''
     comment character.

Leading and trailing spaces are automatically deleted from option names
and values.

You can use the escape sequences ``\b'', ``\t'', ``\n'', ``\r'',
``\\'', and ``\s'' in option values to represent the backspace, tab,
newline, carriage return, backslash, and space characters. The escaping
rules in option files are:

   * If a backslash is followed by a valid escape sequence character,
     the sequence is converted to the character represented by the
     sequence. For example, ``\s'' is converted to a space.

   * If a backslash is not followed by a valid escape sequence
     character, it remains unchanged. For example, ``\S'' is retained
     as is.

The preceding rules mean that a literal backslash can be given as
``\\'', or as ``\'' if it is not followed by a valid escape sequence
character.

The rules for escape sequences in option files differ slightly from the
rules for escape sequences in string literals in SQL statements. In the
latter context, if `X' is not a valid escape sequence character, ``\X''
becomes `X' rather than ``\X''.  See *Note string-literals::.

The escaping rules for option file values are especially pertinent for
Windows path names, which use ``\'' as a path name separator. A
separator in a Windows path name must be written as ``\\'' if it is
followed by an escape sequence character. It can be written as ``\\'' or
``\'' if it is not. Alternatively, ``/'' may be used in Windows path
names and will be treated as ``\''. Suppose that you want to specify a
base directory of `C:\Program Files\MySQL\MySQL Server 5.5' in an
option file. This can be done several ways. Some examples:

     basedir="C:\Program Files\MySQL\MySQL Server 5.5"
     basedir="C:\\Program Files\\MySQL\\MySQL Server 5.5"
     basedir="C:/Program Files/MySQL/MySQL Server 5.5"
     basedir=C:\\Program\sFiles\\MySQL\\MySQL\sServer\s5.5

If an option group name is the same as a program name, options in the
group apply specifically to that program. For example, the `[mysqld]'
and `[mysql]' groups apply to the *Note `mysqld': mysqld. server and the
*Note `mysql': mysql. client program, respectively.

The `[client]' option group is read by all client programs (but _not_ by
*Note `mysqld': mysqld.). This enables you to specify options that
apply to all clients. For example, `[client]' is the perfect group to
use to specify the password that you use to connect to the server. (But
make sure that the option file is readable and writable only by
yourself, so that other people cannot find out your password.)  Be sure
not to put an option in the `[client]' group unless it is recognized by
_all_ client programs that you use. Programs that do not understand the
option quit after displaying an error message if you try to run them.

Here is a typical global option file:

     [client]
     port=3306
     socket=/tmp/mysql.sock

     [mysqld]
     port=3306
     socket=/tmp/mysql.sock
     key_buffer_size=16M
     max_allowed_packet=8M

     [mysqldump]
     quick

The preceding option file uses `VAR_NAME=VALUE' syntax for the lines
that set the `key_buffer_size' and `max_allowed_packet' variables.

Here is a typical user option file:

     [client]
     # The following password will be sent to all standard MySQL clients
     password="my_password"

     [mysql]
     no-auto-rehash
     connect_timeout=2

     [mysqlhotcopy]
     interactive-timeout

If you want to create option groups that should be read by *Note
`mysqld': mysqld. servers from a specific MySQL release series only,
you can do this by using groups with names of `[mysqld-5.1]',
`[mysqld-5.5]', and so forth. The following group indicates that the
`--new' option should be used only by MySQL servers with 5.5.x version
numbers:

     [mysqld-5.5]
     new

It is possible to use `!include' directives in option files to include
other option files and `!includedir' to search specific directories for
option files. For example, to include the `/home/mydir/myopt.cnf' file,
use the following directive:

     !include /home/mydir/myopt.cnf

To search the `/home/mydir' directory and read option files found
there, use this directive:

     !includedir /home/mydir

There is no guarantee about the order in which the option files in the
directory will be read.

*Note*:

Currently, any files to be found and included using the `!includedir'
directive on Unix operating systems _must_ have file names ending in
`.cnf'. On Windows, this directive checks for files with the `.ini' or
`.cnf' extension.

Write the contents of an included option file like any other option
file. That is, it should contain groups of options, each preceded by a
`[GROUP]' line that indicates the program to which the options apply.

While an included file is being processed, only those options in groups
that the current program is looking for are used. Other groups are
ignored. Suppose that a `my.cnf' file contains this line:

     !include /home/mydir/myopt.cnf

And suppose that `/home/mydir/myopt.cnf' looks like this:

     [mysqladmin]
     force

     [mysqld]
     key_buffer_size=16M

If `my.cnf' is processed by *Note `mysqld': mysqld, only the `[mysqld]'
group in `/home/mydir/myopt.cnf' is used. If the file is processed by
*Note `mysqladmin': mysqladmin, only the `[mysqladmin]' group is used.
If the file is processed by any other program, no options in
`/home/mydir/myopt.cnf' are used.

The `!includedir' directive is processed similarly except that all
option files in the named directory are read.


File: manual.info,  Node: option-file-options,  Next: program-variables,  Prev: option-files,  Up: program-options

4.2.3.4 Command-Line Options that Affect Option-File Handling
.............................................................

Most MySQL programs that support option files handle the following
options. They affect option-file handling, so they must be given on the
command line and not in an option file. To work properly, each of these
options must be given before other options, with these exceptions:

   * `--print-defaults' may be used immediately after `--defaults-file'
     or `--defaults-extra-file'.

   * On Windows, if the server is started with the `--defaults-file' and
     `--install' options, `--install' must be first. See *Note
     windows-start-service::.

When specifying file names, you should avoid the use of the ``~'' shell
metacharacter because it might not be interpreted as you expect.

   *  `--defaults-extra-file=FILE_NAME'

     Read this option file after the global option file but (on Unix)
     before the user option file. If the file does not exist or is
     otherwise inaccessible, the program exits with an error. Before
     MySQL 5.5.8, FILE_NAME must be the full path name to the file. As
     of MySQL 5.5.8, the name is interpreted relative to the current
     directory if given as a relative path name.

   *  `--defaults-file=FILE_NAME'

     Use only the given option file. If the file does not exist or is
     otherwise inaccessible, the program exits with an error. Before
     MySQL 5.5.8, FILE_NAME must be the full path name to the file. As
     of MySQL 5.5.8, the name is interpreted relative to the current
     directory if given as a relative path name.

   *  `--defaults-group-suffix=STR'

     If this option is given, the program reads not only its usual
     option groups, but also groups with the usual names and a suffix
     of STR. For example, the *Note `mysql': mysql. client normally
     reads the `[client]' and `[mysql]' groups. If the
     `--defaults-group-suffix=_other' option is given, *Note `mysql':
     mysql. also reads the `[client_other]' and `[mysql_other]' groups.

   *  `--no-defaults'

     Do not read any option files. If a program does not start because
     it is reading unknown options from an option file, `--no-defaults'
     can be used to prevent the program from reading them.

   *  `--print-defaults'

     Print the program name and all options that it gets from option
     files.


File: manual.info,  Node: program-variables,  Next: option-defaults-equals,  Prev: option-file-options,  Up: program-options

4.2.3.5 Using Options to Set Program Variables
..............................................

Many MySQL programs have internal variables that can be set at runtime
using the *Note `SET': set-statement.  statement. See *Note
set-statement::, and *Note using-system-variables::.

Most of these program variables also can be set at server startup by
using the same syntax that applies to specifying program options. For
example, *Note `mysql': mysql. has a `max_allowed_packet' variable that
controls the maximum size of its communication buffer. To set the
`max_allowed_packet' variable for *Note `mysql': mysql. to a value of
16MB, use either of the following commands:

     shell> mysql --max_allowed_packet=16777216
     shell> mysql --max_allowed_packet=16M

The first command specifies the value in bytes. The second specifies
the value in megabytes. For variables that take a numeric value, the
value can be given with a suffix of `K', `M', or `G' (either uppercase
or lowercase) to indicate a multiplier of 1024, 1024^2 or 1024^3. (For
example, when used to set `max_allowed_packet', the suffixes indicate
units of kilobytes, megabytes, or gigabytes.)

In an option file, variable settings are given without the leading
dashes:

     [mysql]
     max_allowed_packet=16777216

Or:

     [mysql]
     max_allowed_packet=16M

If you like, underscores in a variable name can be specified as dashes.
The following option groups are equivalent. Both set the size of the
server's key buffer to 512MB:

     [mysqld]
     key_buffer_size=512M

     [mysqld]
     key-buffer-size=512M

A variable can be specified by writing it in full or as any unambiguous
prefix. For example, the `max_allowed_packet' variable can be set for
*Note `mysql': mysql. as `--max_a', but not as `--max' because the
latter is ambiguous:

     shell> mysql --max=1000000
     mysql: ambiguous option '--max=1000000' (max_allowed_packet, max_join_size)

Be aware that the use of variable prefixes can cause problems in the
event that new variables are implemented for a program. A prefix that
is unambiguous now might become ambiguous in the future.

Suffixes for specifying a value multiplier can be used when setting a
variable at server startup, but not to set the value with *Note `SET':
set-statement. at runtime. On the other hand, with *Note `SET':
set-statement. you can assign a variable's value using an expression,
which is not true when you set a variable at server startup. For
example, the first of the following lines is legal at server startup,
but the second is not:

     shell> mysql --max_allowed_packet=16M
     shell> mysql --max_allowed_packet=16*1024*1024

Conversely, the second of the following lines is legal at runtime, but
the first is not:

     mysql> SET GLOBAL max_allowed_packet=16M;
     mysql> SET GLOBAL max_allowed_packet=16*1024*1024;

*Note*:

Before MySQL 4.0.2, the only syntax for setting program variables was
`--set-variable=OPTION=VALUE' (or `set-variable=OPTION=VALUE' in option
files). Underscores cannot be given as dashes, and the variable name
must be specified in full. This syntax is deprecated and was removed in
MySQL 5.5.3.


File: manual.info,  Node: option-defaults-equals,  Prev: program-variables,  Up: program-options

4.2.3.6 Option Defaults, Options Expecting Values, and the `=' Sign
...................................................................

By convention, long forms of options that assign a value are written
with an equals (`=') sign, like this:

     shell> mysql --host=tonfisk --user=jon

For options that require a value (that is, not having a default value),
the equal sign is not required, and so the following is also valid:

     shell> mysql --host tonfisk --user jon

In both cases, the *Note `mysql': mysql. client attempts to connect to
a MySQL server running on the host named `tonfisk' using an account
with the user name `jon'.

Due to this behavior, problems can occasionally arise when no value is
provided for an option that expects one. Consider the following
example, where a user connects to a MySQL server running on host
`tonfisk' as user `jon':

     shell> mysql --host 85.224.35.45 --user jon
     Welcome to the MySQL monitor.  Commands end with ; or \g.
     Your MySQL connection id is 3
     Server version: 5.5.35 Source distribution

     Type 'help;' or '\h' for help. Type '\c' to clear the buffer.

     mysql> SELECT CURRENT_USER();
     +----------------+
     | CURRENT_USER() |
     +----------------+
     | jon@%          |
     +----------------+
     1 row in set (0.00 sec)

Omitting the required value for one of these option yields an error,
such as the one shown here:

     shell> mysql --host 85.224.35.45 --user
     `mysql: option '--user' requires an argument'

In this case, *Note `mysql': mysql. was unable to find a value
following the `--user' option because nothing came after it on the
command line.  However, if you omit the value for an option that is
_not_ the last option to be used, you obtain a different error that you
may not be expecting:

     shell> mysql --host --user jon
     `ERROR 2005 (HY000): Unknown MySQL server host '--user' (1)'

Because *Note `mysql': mysql. assumes that any string following
`--host' on the command line is a host name, `--host' `--user' is
interpreted as `--host=--user', and the client attempts to connect to a
MySQL server running on a host named `--user'.

Options having default values always require an equal sign when
assigning a value; failing to do so causes an error. For example, the
MySQL server `--log-error' option has the default value `HOST_NAME.err',
where HOST_NAME is the name of the host on which MySQL is running.
Assume that you are running MySQL on a computer whose host name is
`tonfisk', and consider the following invocation of *Note
`mysqld_safe': mysqld-safe.:

     shell> mysqld_safe &
     [1] 11699
     shell> 080112 12:53:40 mysqld_safe Logging to '/usr/local/mysql/var/tonfisk.err'.
     080112 12:53:40 mysqld_safe Starting mysqld daemon with databases from /usr/local/mysql/var
     shell>

After shutting down the server, restart it as follows:

     shell> mysqld_safe --log-error &
     [1] 11699
     shell> 080112 12:53:40 mysqld_safe Logging to '/usr/local/mysql/var/tonfisk.err'.
     080112 12:53:40 mysqld_safe Starting mysqld daemon with databases from /usr/local/mysql/var
     shell>

The result is the same, since `--log-error' is not followed by anything
else on the command line, and it supplies its own default value. (The
`&' character tells the operating system to run MySQL in the
background; it is ignored by MySQL itself.) Now suppose that you wish
to log errors to a file named `my-errors.err'. You might try starting
the server with `--log-error my-errors', but this does not have the
intended effect, as shown here:

     shell> mysqld_safe --log-error my-errors &
     [1] 31357
     shell> 080111 22:53:31 mysqld_safe Logging to '/usr/local/mysql/var/tonfisk.err'.
     080111 22:53:32 mysqld_safe Starting mysqld daemon with databases from /usr/local/mysql/var
     080111 22:53:34 mysqld_safe mysqld from pid file /usr/local/mysql/var/tonfisk.pid ended

     [1]+  Done                    ./mysqld_safe --log-error my-errors

The server attempted to start using `/usr/local/mysql/var/tonfisk.err'
as the error log, but then shut down. Examining the last few lines of
this file shows the reason:

     shell> tail /usr/local/mysql/var/tonfisk.err
     080111 22:53:32  InnoDB: Started; log sequence number 0 46409
     `/usr/local/mysql/libexec/mysqld: Too many arguments (first extra is 'my-errors').
     Use --verbose --help to get a list of available options'
     080111 22:53:32 `[ERROR] Aborting'

     080111 22:53:32  InnoDB: Starting shutdown...
     080111 22:53:34  InnoDB: Shutdown completed; log sequence number 0 46409
     080111 22:53:34 [Note] /usr/local/mysql/libexec/mysqld: Shutdown complete

     080111 22:53:34 mysqld_safe mysqld from pid file /usr/local/mysql/var/tonfisk.pid ended

Because the `--log-error' option supplies a default value, you must use
an equal sign to assign a different value to it, as shown here:

     shell> mysqld_safe --log-error=my-errors &
     [1] 31437
     shell> 080111 22:54:15 mysqld_safe Logging to '/usr/local/mysql/var/my-errors.err'.
     080111 22:54:15 mysqld_safe Starting mysqld daemon with databases from /usr/local/mysql/var

     shell>

Now the server has been started successfully, and is logging errors to
the file `/usr/local/mysql/var/my-errors.err'.

Similar issues can arise when specifying option values in option files.
For example, consider a `my.cnf' file that contains the following:

     [mysql]

     host
     user

When the *Note `mysql': mysql. client reads this file, these entries
are parsed as `--host' `--user' or `--host=--user', with the result
shown here:

     shell> mysql
     `ERROR 2005 (HY000): Unknown MySQL server host '--user' (1)'

However, in option files, an equal sign is not assumed. Suppose the
`my.cnf' file is as shown here:

     [mysql]

     user jon

Trying to start *Note `mysql': mysql. in this case causes a different
error:

     shell> mysql
     `mysql: unknown option '--user jon''

A similar error would occur if you were to write `host tonfisk' in the
option file rather than `host=tonfisk'. Instead, you must use the equal
sign:

     [mysql]

     user=jon

Now the login attempt succeeds:

     shell> mysql
     Welcome to the MySQL monitor.  Commands end with ; or \g.
     Your MySQL connection id is 5
     Server version: 5.5.35 Source distribution

     Type 'help;' or '\h' for help. Type '\c' to clear the buffer.

     mysql> SELECT USER();
     +---------------+
     | USER()        |
     +---------------+
     | jon@localhost |
     +---------------+
     1 row in set (0.00 sec)

This is not the same behavior as with the command line, where the
equals sign is not required:

     shell> mysql --user jon --host tonfisk
     Welcome to the MySQL monitor.  Commands end with ; or \g.
     Your MySQL connection id is 6
     Server version: 5.5.35 Source distribution

     Type 'help;' or '\h' for help. Type '\c' to clear the buffer.

     mysql> SELECT USER();
     +---------------+
     | USER()        |
     +---------------+
     | jon@tonfisk   |
     +---------------+
     1 row in set (0.00 sec)

In MySQL 5.5, specifying an option requiring a value without a value in
an option file causes the server to abort with an error. Suppose that
`my.cnf' contains the following:

     [mysqld]
     log_error
     relay_log
     relay_log_index

This causes the server to fail on startup, as shown here:

     shell> mysqld_safe &

     090514 09:48:39 mysqld_safe Logging to '/home/jon/bin/mysql-5.5/var/tonfisk.err'.
     090514 09:48:39 mysqld_safe Starting mysqld daemon with databases from /home/jon/bin/mysql-5.5/var
     090514 09:48:39 mysqld_safe mysqld from pid file /home/jon/bin/mysql-5.5/var/tonfisk.pid ended

The `--log-error' option does not require an argument; however, the
`--relay-log' option requires one, as shown in the error log (which in
the absence of a specified value, defaults to `DATADIR/HOSTNAME.err'):

     shell> tail -n 3 ../var/tonfisk.err

     090514 09:48:39 mysqld_safe Starting mysqld daemon with databases from /home/jon/bin/mysql-5.5/var
     090514  9:48:39 [ERROR] /home/jon/bin/mysql-5.5/libexec/mysqld: option '--relay-log' requires an argument
     090514  9:48:39 [ERROR] Aborting

This is a change from previous behavior, where the server would have
interpreted the last two lines in the example `my.cnf' file as
`--relay-log=relay_log_index' and created a relay log file using
`relay_log_index' as the basename.  (Bug #25192)


File: manual.info,  Node: setting-environment-variables,  Prev: program-options,  Up: programs-using

4.2.4 Setting Environment Variables
-----------------------------------

Environment variables can be set at the command prompt to affect the
current invocation of your command processor, or set permanently to
affect future invocations. To set a variable permanently, you can set
it in a startup file or by using the interface provided by your system
for this purpose. Consult the documentation for your command
interpreter for specific details.  *Note environment-variables::, lists
all environment variables that affect MySQL program operation.

To specify a value for an environment variable, use the syntax
appropriate for your command processor. For example, on Windows, you
can set the `USER' variable to specify your MySQL account name. To do
so, use this syntax:

     SET USER=YOUR_NAME

The syntax on Unix depends on your shell. Suppose that you want to
specify the TCP/IP port number using the `MYSQL_TCP_PORT' variable.
Typical syntax (such as for `sh', `ksh', `bash', `zsh', and so on) is as
follows:

     MYSQL_TCP_PORT=3306
     export MYSQL_TCP_PORT

The first command sets the variable, and the `export' command exports
the variable to the shell environment so that its value becomes
accessible to MySQL and other processes.

For `csh' and `tcsh', use `setenv' to make the shell variable available
to the environment:

     setenv MYSQL_TCP_PORT 3306

The commands to set environment variables can be executed at your
command prompt to take effect immediately, but the settings persist
only until you log out. To have the settings take effect each time you
log in, use the interface provided by your system or place the
appropriate command or commands in a startup file that your command
interpreter reads each time it starts.

On Windows, you can set environment variables using the System Control
Panel (under Advanced).

On Unix, typical shell startup files are `.bashrc' or `.bash_profile'
for `bash', or `.tcshrc' for `tcsh'.

Suppose that your MySQL programs are installed in
`/usr/local/mysql/bin' and that you want to make it easy to invoke
these programs. To do this, set the value of the `PATH' environment
variable to include that directory. For example, if your shell is
`bash', add the following line to your `.bashrc' file:

     PATH=${PATH}:/usr/local/mysql/bin

`bash' uses different startup files for login and nonlogin shells, so
you might want to add the setting to `.bashrc' for login shells and to
`.bash_profile' for nonlogin shells to make sure that `PATH' is set
regardless.

If your shell is `tcsh', add the following line to your `.tcshrc' file:

     setenv PATH ${PATH}:/usr/local/mysql/bin

If the appropriate startup file does not exist in your home directory,
create it with a text editor.

After modifying your `PATH' setting, open a new console window on
Windows or log in again on Unix so that the setting goes into effect.


File: manual.info,  Node: programs-server,  Next: programs-installation,  Prev: programs-using,  Up: programs

4.3 MySQL Server and Server-Startup Programs
============================================

* Menu:

* mysqld::                       `mysqld' --- The MySQL Server
* mysqld-safe::                  `mysqld_safe' --- MySQL Server Startup Script
* mysql-server::                 `mysql.server' --- MySQL Server Startup Script
* mysqld-multi::                 `mysqld_multi' --- Manage Multiple MySQL Servers

This section describes *Note `mysqld': mysqld, the MySQL server, and
several programs that are used to start the server.


File: manual.info,  Node: mysqld,  Next: mysqld-safe,  Prev: programs-server,  Up: programs-server

4.3.1 `mysqld' -- The MySQL Server
----------------------------------

*Note `mysqld': mysqld, also known as MySQL Server, is the main program
that does most of the work in a MySQL installation.  MySQL Server
manages access to the MySQL data directory that contains databases and
tables. The data directory is also the default location for other
information such as log files and status files.

When MySQL server starts, it listens for network connections from
client programs and manages access to databases on behalf of those
clients.

The *Note `mysqld': mysqld. program has many options that can be
specified at startup. For a complete list of options, run this command:

     shell> mysqld --verbose --help

MySQL Server also has a set of system variables that affect its
operation as it runs. System variables can be set at server startup,
and many of them can be changed at runtime to effect dynamic server
reconfiguration. MySQL Server also has a set of status variables that
provide information about its operation.  You can monitor these status
variables to access runtime performance characteristics.

For a full description of MySQL Server command options, system
variables, and status variables, see *Note mysqld-server::. For
information about installing MySQL and setting up the initial
configuration, see *Note installing::.


File: manual.info,  Node: mysqld-safe,  Next: mysql-server,  Prev: mysqld,  Up: programs-server

4.3.2 `mysqld_safe' -- MySQL Server Startup Script
--------------------------------------------------

*Note `mysqld_safe': mysqld-safe. is the recommended way to start a
*Note `mysqld': mysqld. server on Unix.  *Note `mysqld_safe':
mysqld-safe. adds some safety features such as restarting the server
when an error occurs and logging runtime information to an error log
file. A description of error logging is given later in this section.

*Note `mysqld_safe': mysqld-safe. tries to start an executable named
*Note `mysqld': mysqld. To override the default behavior and specify
explicitly the name of the server you want to run, specify a `--mysqld'
or `--mysqld-version' option to *Note `mysqld_safe': mysqld-safe. You
can also use `--ledir' to indicate the directory where *Note
`mysqld_safe': mysqld-safe. should look for the server.

Many of the options to *Note `mysqld_safe': mysqld-safe. are the same
as the options to *Note `mysqld': mysqld. See *Note server-options::.

Options unknown to *Note `mysqld_safe': mysqld-safe. are passed to
*Note `mysqld': mysqld. if they are specified on the command line, but
ignored if they are specified in the `[mysqld_safe]' group of an option
file. See *Note option-files::.

*Note `mysqld_safe': mysqld-safe. reads all options from the
`[mysqld]', `[server]', and `[mysqld_safe]' sections in option files.
For example, if you specify a `[mysqld]' section like this, *Note
`mysqld_safe': mysqld-safe. will find and use the `--log-error' option:

     [mysqld]
     log-error=error.log

For backward compatibility, *Note `mysqld_safe': mysqld-safe. also
reads `[safe_mysqld]' sections, although you should rename such
sections to `[mysqld_safe]' in MySQL 5.5 installations.

*Note `mysqld_safe': mysqld-safe. supports the following options.  It
also reads option files and supports the options for processing them
described at *Note option-file-options::.

*`mysqld_safe' Options*

Format      Option File Description                   Introduced
-basedir=pathbasedir     The path to the MySQL         
                        installation directory        
-core-file-size=sizecore-file-sizeThe size of the core file     
                        that mysqld should be able    
                        to create                     
-datadir=pathdatadir     The path to the data          
                        directory                     
-defaults-extra-file=pathdefaults-extra-fileThe name of an option file    
                        to be read in addition to     
                        the usual option files        
-defaults-file=file_namedefaults-fileThe name of an option file    
                        to be read instead of the     
                        usual option files            
-help                   Display a help message and    
                        exit                          
-ledir=path ledir       Use this option to indicate   
                        the path name to the          
                        directory where the server    
                        is located                    
-log-error=file_namelog-error   Write the error log to the    
                        given file                    
-malloc-lib=[lib-name]malloc-lib  Alternative malloc library    
                        to use for mysqld             
-mysqld=prog_namemysqld      The name of the server        
                        program (in the ledir         
                        directory) that you want to   
                        start                         
-mysqld-version=suffixmysqld-versionThis option is similar to     
                        the -mysqld option, but you   
                        specify only the suffix for   
                        the server program name       
-nice=prioritynice        Use the nice program to set   
                        the server's scheduling       
                        priority to the given value   
-no-defaultsno-defaults Do not read any option files  
-open-files-limit=countopen-files-limitThe number of files that      
                        mysqld should be able to open 
-pid-file=file_namepid-file=file_nameThe path name of the process  
                        ID file                       
-plugin-dir=pathplugin-dir=pathThe directory where plugins   5.5.3
                        are located                   
-port=numberport        The port number that the      
                        server should use when        
                        listening for TCP/IP          
                        connections                   
-skip-kill-mysqldskip-kill-mysqldDo not try to kill stray      
                        mysqld processes              
-skip-syslogskip-syslog Do not write error messages   
                        to syslog; use error log file 
-socket=pathsocket      The Unix socket file that     
                        the server should use when    
                        listening for local           
                        connections                   
-syslog     syslog      Write error messages to       
                        syslog                        
-syslog-tag=tagsyslog-tag  Tag suffix for messages       
                        written to syslog             
-timezone=timezonetimezone    Set the TZ time zone          
                        environment variable to the   
                        given option value            
-user={user_name|user_id}user        Run the mysqld server as the  
                        user having the name          
                        user_name or the numeric      
                        user ID user_id               

   *  `--help'

     Display a help message and exit.

   *  `--basedir=PATH'

     The path to the MySQL installation directory.

   *  `--core-file-size=SIZE'

     The size of the core file that *Note `mysqld': mysqld.  should be
     able to create. The option value is passed to `ulimit -c'.

   *  `--datadir=PATH'

     The path to the data directory.

   *  `--defaults-extra-file=PATH'

     The name of an option file to be read in addition to the usual
     option files. This must be the first option on the command line if
     it is used. If the file does not exist or is otherwise
     inaccessible, the server will exit with an error.

   *  `--defaults-file=FILE_NAME'

     The name of an option file to be read instead of the usual option
     files. This must be the first option on the command line if it is
     used.

   *  `--ledir=PATH'

     If *Note `mysqld_safe': mysqld-safe. cannot find the server, use
     this option to indicate the path name to the directory where the
     server is located.

   *  `--log-error=FILE_NAME'

     Write the error log to the given file. See *Note error-log::.

   *  `--malloc-lib=[LIB_NAME]'

     The name of the library to use for memory allocation instead of
     the system `malloc()' library. Any library can be used by
     specifying its path name, but there is a shortcut form to enable
     use of the `tcmalloc' library that is shipped with binary MySQL
     distributions for Linux in MySQL 5.5.

     The `--malloc-lib' option works by modifying the `LD_PRELOAD'
     environment value to affect dynamic linking to enable the loader
     to find the memory-allocation library when *Note `mysqld': mysqld.
     runs:

        * If the option is not given, or is given without a value
          (`--malloc-lib='), `LD_PRELOAD' is not modified and no
          attempt is made to use `tcmalloc'.

        * If the option is given as `--malloc-lib=tcmalloc', *Note
          `mysqld_safe': mysqld-safe. looks for a `tcmalloc' library in
          `/usr/lib' and then in the MySQL `pkglibdir' location (for
          example, `/usr/local/mysql/lib' or whatever is appropriate).
          If `tmalloc' is found, its path name is added to the
          beginning of the `LD_PRELOAD' value for *Note `mysqld':
          mysqld. If `tcmalloc' is not found, *Note `mysqld_safe':
          mysqld-safe. aborts with an error.

        * If the option is given as
          `--malloc-lib=/PATH/TO/SOME/LIBRARY', that full path is added
          to the beginning of the `LD_PRELOAD' value. If the full path
          points to a nonexistent or unreadable file, *Note
          `mysqld_safe': mysqld-safe. aborts with an error.

        * For cases where *Note `mysqld_safe': mysqld-safe. adds a path
          name to `LD_PRELOAD', it adds the path to the beginning of
          any existing value the variable already has.

     Linux users can use the `libtcmalloc_minimal.so' included in
     binary packages by adding these lines to the `my.cnf' file:

          [mysqld_safe]
          malloc-lib=tcmalloc

     Those lines also suffice for users on any platform who have
     installed a `tcmalloc' package in `/usr/lib'. To use a specific
     `tcmalloc' library, specify its full path name. Example:

          [mysqld_safe]
          malloc-lib=/opt/lib/libtcmalloc_minimal.so

   *  `--mysqld=PROG_NAME'

     The name of the server program (in the `ledir' directory) that you
     want to start.  This option is needed if you use the MySQL binary
     distribution but have the data directory outside of the binary
     distribution. If *Note `mysqld_safe': mysqld-safe.  cannot find
     the server, use the `--ledir' option to indicate the path name to
     the directory where the server is located.

   *  `--mysqld-version=SUFFIX'

     This option is similar to the `--mysqld' option, but you specify
     only the suffix for the server program name. The basename is
     assumed to be *Note `mysqld': mysqld. For example, if you use
     `--mysqld-version=debug', *Note `mysqld_safe': mysqld-safe. starts
     the *Note `mysqld-debug': mysqld. program in the `ledir'
     directory. If the argument to `--mysqld-version' is empty, *Note
     `mysqld_safe': mysqld-safe. uses *Note `mysqld': mysqld. in the
     `ledir' directory.

   *  `--nice=PRIORITY'

     Use the `nice' program to set the server's scheduling priority to
     the given value.

   *  `--no-defaults'

     Do not read any option files. This must be the first option on the
     command line if it is used.

   *  `--open-files-limit=COUNT'

     The number of files that *Note `mysqld': mysqld. should be able to
     open. The option value is passed to `ulimit -n'. Note that you
     need to start *Note `mysqld_safe': mysqld-safe. as `root' for this
     to work properly!

   *  `--pid-file=FILE_NAME'

     The path name of the process ID file.

   *  `--plugin-dir=PATH'

     The path name of the plugin directory. This option was added in
     MySQL 5.5.3.

   *  `--port=PORT_NUM'

     The port number that the server should use when listening for
     TCP/IP connections. The port number must be 1024 or higher unless
     the server is started by the `root' system user.

   *  `--skip-kill-mysqld'

     Do not try to kill stray *Note `mysqld': mysqld. processes at
     startup. This option works only on Linux.

   *  `--socket=PATH'

     The Unix socket file that the server should use when listening for
     local connections.

   *  `--syslog', `--skip-syslog'

     `--syslog' causes error messages to be sent to `syslog' on systems
     that support the `logger' program.  `--skip-syslog' suppresses the
     use of `syslog'; messages are written to an error log file.

     When `syslog' is used, the `daemon.err' syslog priority/facility is
     used for all log messages.

   *  `--syslog-tag=TAG'

     For logging to `syslog', messages from *Note `mysqld_safe':
     mysqld-safe. and *Note `mysqld': mysqld.  are written with a tag
     of `mysqld_safe' and `mysqld', respectively. To specify a suffix
     for the tag, use `--syslog-tag=TAG', which modifies the tags to be
     `mysqld_safe-TAG' and `mysqld-TAG'.

   *  `--timezone=TIMEZONE'

     Set the `TZ' time zone environment variable to the given option
     value. Consult your operating system documentation for legal time
     zone specification formats.

   *  `--user={USER_NAME|USER_ID}'

     Run the *Note `mysqld': mysqld. server as the user having the name
     USER_NAME or the numeric user ID USER_ID.  (`User' in this context
     refers to a system login account, not a MySQL user listed in the
     grant tables.)

If you execute *Note `mysqld_safe': mysqld-safe. with the
`--defaults-file' or `--defaults-extra-file' option to name an option
file, the option must be the first one given on the command line or the
option file will not be used. For example, this command will not use
the named option file:

     mysql> mysqld_safe --port=PORT_NUM --defaults-file=FILE_NAME

Instead, use the following command:

     mysql> mysqld_safe --defaults-file=FILE_NAME --port=PORT_NUM

The *Note `mysqld_safe': mysqld-safe. script is written so that it
normally can start a server that was installed from either a source or
a binary distribution of MySQL, even though these types of
distributions typically install the server in slightly different
locations. (See *Note installation-layouts::.)  *Note `mysqld_safe':
mysqld-safe. expects one of the following conditions to be true:

   * The server and databases can be found relative to the working
     directory (the directory from which *Note `mysqld_safe':
     mysqld-safe. is invoked). For binary distributions, *Note
     `mysqld_safe': mysqld-safe. looks under its working directory for
     `bin' and `data' directories. For source distributions, it looks
     for `libexec' and `var' directories. This condition should be met
     if you execute *Note `mysqld_safe': mysqld-safe. from your MySQL
     installation directory (for example, `/usr/local/mysql' for a
     binary distribution).

   * If the server and databases cannot be found relative to the
     working directory, *Note `mysqld_safe': mysqld-safe. attempts to
     locate them by absolute path names. Typical locations are
     `/usr/local/libexec' and `/usr/local/var'. The actual locations
     are determined from the values configured into the distribution at
     the time it was built. They should be correct if MySQL is
     installed in the location specified at configuration time.

Because *Note `mysqld_safe': mysqld-safe. tries to find the server and
databases relative to its own working directory, you can install a
binary distribution of MySQL anywhere, as long as you run *Note
`mysqld_safe': mysqld-safe. from the MySQL installation directory:

     shell> cd MYSQL_INSTALLATION_DIRECTORY
     shell> bin/mysqld_safe &

If *Note `mysqld_safe': mysqld-safe. fails, even when invoked from the
MySQL installation directory, you can specify the `--ledir' and
`--datadir' options to indicate the directories in which the server and
databases are located on your system.

Beginning with MySQL 5.5.21, *Note `mysqld_safe': mysqld-safe.  tries
to use the `sleep' and `date' system utilities to determine how many
times it has attempted to start this second, and--if these are present
and this is greater than 5 times--is forced to wait 1 full second
before starting again. This is intended to prevent excessive CPU usage
in the event of repeated failures.  (Bug #11761530, Bug #54035)

When you use *Note `mysqld_safe': mysqld-safe. to start *Note `mysqld':
mysqld, *Note `mysqld_safe': mysqld-safe.  arranges for error (and
notice) messages from itself and from *Note `mysqld': mysqld. to go to
the same destination.

There are several *Note `mysqld_safe': mysqld-safe. options for
controlling the destination of these messages:

   * `--syslog': Write error messages to `syslog' on systems that
     support the `logger' program.

   * `--skip-syslog': Do not write error messages to `syslog'.
     Messages are written to the default error log file (`HOST_NAME.err'
     in the data directory), or to a named file if the `--log-error'
     option is given.

   * `--log-error=FILE_NAME': Write error messages to the named error
     file.

If none of these options is given, the default is `--skip-syslog'.

If `--syslog' and `--log-error' are both given, a warning is issued and
`--log-error' takes precedence.

When *Note `mysqld_safe': mysqld-safe. writes a message, notices go to
the logging destination (`syslog' or the error log file) and `stdout'.
Errors go to the logging destination and `stderr'.

Normally, you should not edit the *Note `mysqld_safe': mysqld-safe.
script. Instead, configure *Note `mysqld_safe': mysqld-safe. by using
command-line options or options in the `[mysqld_safe]' section of a
`my.cnf' option file. In rare cases, it might be necessary to edit
*Note `mysqld_safe': mysqld-safe. to get it to start the server
properly. However, if you do this, your modified version of *Note
`mysqld_safe': mysqld-safe. might be overwritten if you upgrade MySQL
in the future, so you should make a copy of your edited version that
you can reinstall.


File: manual.info,  Node: mysql-server,  Next: mysqld-multi,  Prev: mysqld-safe,  Up: programs-server

4.3.3 `mysql.server' -- MySQL Server Startup Script
---------------------------------------------------

MySQL distributions on Unix include a script named *Note
`mysql.server': mysql-server. It can be used on systems such as Linux
and Solaris that use System V-style run directories to start and stop
system services. It is also used by the Mac OS X Startup Item for MySQL.

*Note `mysql.server': mysql-server. can be found in the `support-files'
directory under your MySQL installation directory or in a MySQL source
distribution.

If you use the Linux server RPM package (`MySQL-server-VERSION.rpm'),
the *Note `mysql.server': mysql-server. script will be installed in the
`/etc/init.d' directory with the name `mysql'. You need not install it
manually.  See *Note linux-installation-rpm::, for more information on
the Linux RPM packages.

Some vendors provide RPM packages that install a startup script under a
different name such as *Note `mysqld': mysqld.

If you install MySQL from a source distribution or using a binary
distribution format that does not install *Note `mysql.server':
mysql-server. automatically, you can install it manually. Instructions
are provided in *Note automatic-start::.

*Note `mysql.server': mysql-server. reads options from the
`[mysql.server]' and `[mysqld]' sections of option files. For backward
compatibility, it also reads `[mysql_server]' sections, although you
should rename such sections to `[mysql.server]' when using MySQL 5.5.

*Note `mysql.server': mysql-server. supports the following options.

   *  `--basedir=PATH'

     The path to the MySQL installation directory.

   *  `--datadir=PATH'

     The path to the MySQL data directory.

   *  `--pid-file=FILE_NAME'

     The path name of the file in which the server should write its
     process ID.

   *  `--service-startup-timeout=FILE_NAME'

     How long in seconds to wait for confirmation of server startup. If
     the server does not start within this time, *Note `mysql.server':
     mysql-server. exits with an error. The default value is 900. A
     value of 0 means not to wait at all for startup. Negative values
     mean to wait forever (no timeout).

   *  `--use-mysqld_safe'

     Use *Note `mysqld_safe': mysqld-safe. to start the server. This is
     the default.

   *  `--user=USER_NAME'

     The login user name to use for running *Note `mysqld': mysqld.


File: manual.info,  Node: mysqld-multi,  Prev: mysql-server,  Up: programs-server

4.3.4 `mysqld_multi' -- Manage Multiple MySQL Servers
-----------------------------------------------------

*Note `mysqld_multi': mysqld-multi. is designed to manage several *Note
`mysqld': mysqld. processes that listen for connections on different
Unix socket files and TCP/IP ports. It can start or stop servers, or
report their current status.

*Note `mysqld_multi': mysqld-multi. searches for groups named
`[mysqldN]' in `my.cnf' (or in the file named by the `--config-file'
option).  N can be any positive integer. This number is referred to in
the following discussion as the option group number, or GNR. Group
numbers distinguish option groups from one another and are used as
arguments to *Note `mysqld_multi': mysqld-multi. to specify which
servers you want to start, stop, or obtain a status report for.
Options listed in these groups are the same that you would use in the
`[mysqld]' group used for starting *Note `mysqld': mysqld. (See, for
example, *Note automatic-start::.) However, when using multiple
servers, it is necessary that each one use its own value for options
such as the Unix socket file and TCP/IP port number. For more
information on which options must be unique per server in a
multiple-server environment, see *Note multiple-servers::.

To invoke *Note `mysqld_multi': mysqld-multi, use the following syntax:

     shell> mysqld_multi [OPTIONS] {start|stop|report} [GNR[,GNR] ...]

`start', `stop', and `report' indicate which operation to perform.  You
can perform the designated operation for a single server or multiple
servers, depending on the GNR list that follows the option name. If
there is no list, *Note `mysqld_multi': mysqld-multi.  performs the
operation for all servers in the option file.

Each GNR value represents an option group number or range of group
numbers. The value should be the number at the end of the group name in
the option file. For example, the GNR for a group named `[mysqld17]' is
`17'. To specify a range of numbers, separate the first and last numbers
by a dash. The GNR value `10-13' represents groups `[mysqld10]' through
`[mysqld13]'. Multiple groups or group ranges can be specified on the
command line, separated by commas. There must be no whitespace
characters (spaces or tabs) in the GNR list; anything after a whitespace
character is ignored.

This command starts a single server using option group `[mysqld17]':

     shell> mysqld_multi start 17

This command stops several servers, using option groups `[mysqld8]' and
`[mysqld10]' through `[mysqld13]':

     shell> mysqld_multi stop 8,10-13

For an example of how you might set up an option file, use this command:

     shell> mysqld_multi --example

*Note `mysqld_multi': mysqld-multi. searches for option files as
follows:

   *  With `--no-defaults', no option files are read.

   *  With `--defaults-file=FILE_NAME', only the named file is read.

   *  Otherwise, option files in the standard list of locations are
     read, including any file named by the
     `--defaults-extra-file=FILE_NAME' option, if one is given. (If the
     option is given multiple times, the last value is used.)

Option files read are searched for `[mysqld_multi]' and `[mysqldN]'
option groups. The `[mysqld_multi]' group can be used for options to
*Note `mysqld_multi': mysqld-multi. itself.  `[mysqldN]' groups can be
used for options passed to specific *Note `mysqld': mysqld. instances.

The `[mysqld]' or `[mysqld_safe]' groups can be used for common options
read by all instances of *Note `mysqld': mysqld. or *Note
`mysqld_safe': mysqld-safe. You can specify a
`--defaults-file=FILE_NAME' option to use a different configuration
file for that instance, in which case the `[mysqld]' or `[mysqld_safe]'
groups from that file will be used for that instance.

*Note `mysqld_multi': mysqld-multi. supports the following options.

   *  `--help'

     Display a help message and exit.

   *  `--config-file=FILE_NAME'

     This option is deprecated. If given, it is treated the same way as
     `--defaults-extra-file', described earlier.  `--config-file' was
     removed in MySQL 5.5.3.

   *  `--example'

     Display a sample option file.

   *  `--log=FILE_NAME'

     Specify the name of the log file. If the file exists, log output
     is appended to it.

   *  `--mysqladmin=PROG_NAME'

     The *Note `mysqladmin': mysqladmin. binary to be used to stop
     servers.

   *  `--mysqld=PROG_NAME'

     The *Note `mysqld': mysqld. binary to be used. Note that you can
     specify *Note `mysqld_safe': mysqld-safe. as the value for this
     option also. If you use *Note `mysqld_safe': mysqld-safe. to start
     the server, you can include the `mysqld' or `ledir' options in the
     corresponding `[mysqldN]' option group. These options indicate the
     name of the server that *Note `mysqld_safe': mysqld-safe. should
     start and the path name of the directory where the server is
     located. (See the descriptions for these options in *Note
     mysqld-safe::.) Example:

          [mysqld38]
          mysqld = mysqld-debug
          ledir  = /opt/local/mysql/libexec

   *  `--no-log'

     Print log information to `stdout' rather than to the log file. By
     default, output goes to the log file.

   *  `--password=PASSWORD'

     The password of the MySQL account to use when invoking *Note
     `mysqladmin': mysqladmin. Note that the password value is not
     optional for this option, unlike for other MySQL programs.

   *  `--silent'

     Silent mode; disable warnings.

   *  `--tcp-ip'

     Connect to each MySQL server through the TCP/IP port instead of
     the Unix socket file. (If a socket file is missing, the server
     might still be running, but accessible only through the TCP/IP
     port.) By default, connections are made using the Unix socket
     file. This option affects `stop' and `report' operations.

   *  `--user=USER_NAME'

     The user name of the MySQL account to use when invoking *Note
     `mysqladmin': mysqladmin.

   *  `--verbose'

     Be more verbose.

   *  `--version'

     Display version information and exit.

Some notes about *Note `mysqld_multi': mysqld-multi.:

   * *Most important*: Before using *Note `mysqld_multi': mysqld-multi.
     be sure that you understand the meanings of the options that are
     passed to the *Note `mysqld': mysqld. servers and _why_ you would
     want to have separate *Note `mysqld': mysqld. processes. Beware of
     the dangers of using multiple *Note `mysqld': mysqld. servers with
     the same data directory. Use separate data directories, unless you
     _know_ what you are doing. Starting multiple servers with the same
     data directory does _not_ give you extra performance in a threaded
     system. See *Note multiple-servers::.

   * *Important*:

     Make sure that the data directory for each server is fully
     accessible to the Unix account that the specific *Note `mysqld':
     mysqld. process is started as.  _Do not_ use the Unix ROOT account
     for this, unless you _know_ what you are doing. See *Note
     changing-mysql-user::.

   * Make sure that the MySQL account used for stopping the *Note
     `mysqld': mysqld. servers (with the *Note `mysqladmin':
     mysqladmin. program) has the same user name and password for each
     server. Also, make sure that the account has the `SHUTDOWN'
     privilege. If the servers that you want to manage have different
     user names or passwords for the administrative accounts, you might
     want to create an account on each server that has the same user
     name and password. For example, you might set up a common
     `multi_admin' account by executing the following commands for each
     server:

          shell> mysql -u root -S /tmp/mysql.sock -p
          Enter password:
          mysql> GRANT SHUTDOWN ON *.*
              -> TO 'multi_admin'@'localhost' IDENTIFIED BY 'multipass';

     See *Note privilege-system::. You have to do this for each *Note
     `mysqld': mysqld. server. Change the connection parameters
     appropriately when connecting to each one. Note that the host name
     part of the account name must permit you to connect as
     `multi_admin' from the host where you want to run *Note
     `mysqld_multi': mysqld-multi.

   * The Unix socket file and the TCP/IP port number must be different
     for every *Note `mysqld': mysqld.  (Alternatively, if the host has
     multiple network addresses, you can use `--bind-address' to cause
     different servers to listen to different interfaces.)

   * The `--pid-file' option is very important if you are using *Note
     `mysqld_safe': mysqld-safe. to start *Note `mysqld': mysqld. (for
     example, `--mysqld=mysqld_safe') Every *Note `mysqld': mysqld.
     should have its own process ID file. The advantage of using *Note
     `mysqld_safe': mysqld-safe. instead of *Note `mysqld': mysqld. is
     that *Note `mysqld_safe': mysqld-safe. monitors its *Note
     `mysqld': mysqld. process and restarts it if the process
     terminates due to a signal sent using `kill -9' or for other
     reasons, such as a segmentation fault. Please note that the *Note
     `mysqld_safe': mysqld-safe.  script might require that you start
     it from a certain place.  This means that you might have to change
     location to a certain directory before running *Note
     `mysqld_multi': mysqld-multi. If you have problems starting,
     please see the *Note `mysqld_safe': mysqld-safe.  script. Check
     especially the lines:

          ----------------------------------------------------------------
          MY_PWD=`pwd`
          # Check if we are starting this relative (for the binary release)
          if test -d $MY_PWD/data/mysql -a \
             -f ./share/mysql/english/errmsg.sys -a \
             -x ./bin/mysqld
          ----------------------------------------------------------------

     The test performed by these lines should be successful, or you
     might encounter problems. See *Note mysqld-safe::.

   * You might want to use the `--user' option for *Note `mysqld':
     mysqld, but to do this you need to run the *Note `mysqld_multi':
     mysqld-multi. script as the Unix superuser (`root'). Having the
     option in the option file doesn't matter; you just get a warning if
     you are not the superuser and the *Note `mysqld': mysqld.
     processes are started under your own Unix account.

The following example shows how you might set up an option file for use
with *Note `mysqld_multi': mysqld-multi. The order in which the *Note
`mysqld': mysqld. programs are started or stopped depends on the order
in which they appear in the option file.  Group numbers need not form
an unbroken sequence. The first and fifth `[mysqldN]' groups were
intentionally omitted from the example to illustrate that you can have
`gaps' in the option file. This gives you more flexibility.

     # This file should probably be in your home dir (~/.my.cnf)
     # or /etc/my.cnf
     # Version 2.1 by Jani Tolonen

     [mysqld_multi]
     mysqld     = /usr/local/bin/mysqld_safe
     mysqladmin = /usr/local/bin/mysqladmin
     user       = multi_admin
     password   = multipass

     [mysqld2]
     socket     = /tmp/mysql.sock2
     port       = 3307
     pid-file   = /usr/local/mysql/var2/hostname.pid2
     datadir    = /usr/local/mysql/var2
     language   = /usr/local/share/mysql/english
     user       = john

     [mysqld3]
     socket     = /tmp/mysql.sock3
     port       = 3308
     pid-file   = /usr/local/mysql/var3/hostname.pid3
     datadir    = /usr/local/mysql/var3
     language   = /usr/local/share/mysql/swedish
     user       = monty

     [mysqld4]
     socket     = /tmp/mysql.sock4
     port       = 3309
     pid-file   = /usr/local/mysql/var4/hostname.pid4
     datadir    = /usr/local/mysql/var4
     language   = /usr/local/share/mysql/estonia
     user       = tonu

     [mysqld6]
     socket     = /tmp/mysql.sock6
     port       = 3311
     pid-file   = /usr/local/mysql/var6/hostname.pid6
     datadir    = /usr/local/mysql/var6
     language   = /usr/local/share/mysql/japanese
     user       = jani

See *Note option-files::.


File: manual.info,  Node: programs-installation,  Next: programs-client,  Prev: programs-server,  Up: programs

4.4 MySQL Installation-Related Programs
=======================================

* Menu:

* comp-err::                     `comp_err' --- Compile MySQL Error Message File
* mysqlbug::                     `mysqlbug' --- Generate Bug Report
* mysql-install-db::             `mysql_install_db' --- Initialize MySQL Data Directory
* mysql-plugin::                 `mysql_plugin' --- Configure MySQL Server Plugins
* mysql-secure-installation::    `mysql_secure_installation' --- Improve MySQL Installation Security
* mysql-tzinfo-to-sql::          `mysql_tzinfo_to_sql' --- Load the Time Zone Tables
* mysql-upgrade::                `mysql_upgrade' --- Check and Upgrade MySQL Tables

The programs in this section are used when installing or upgrading
MySQL.


File: manual.info,  Node: comp-err,  Next: mysqlbug,  Prev: programs-installation,  Up: programs-installation

4.4.1 `comp_err' -- Compile MySQL Error Message File
----------------------------------------------------

*Note `comp_err': comp-err. creates the `errmsg.sys' file that is used
by *Note `mysqld': mysqld. to determine the error messages to display
for different error codes. *Note `comp_err': comp-err.  normally is run
automatically when MySQL is built. It compiles the `errmsg.sys' file
from the plaintext file located at `sql/share/errmsg.txt' in MySQL
source distributions.

*Note `comp_err': comp-err. also generates `mysqld_error.h',
`mysqld_ername.h', and `sql_state.h' header files.

For more information about how error messages are defined, see the
MySQL Internals Manual (http://dev.mysql.com/doc/internals/en).

Invoke *Note `comp_err': comp-err. like this:

     shell> comp_err [OPTIONS]

*Note `comp_err': comp-err. supports the following options.

   *  `--help', `-?'

     Display a help message and exit.

   *  `--charset=PATH', `-C PATH'

     The character set directory. The default is
     `../sql/share/charsets'.

   *  `--debug=DEBUG_OPTIONS', `-# DEBUG_OPTIONS'

     Write a debugging log. A typical DEBUG_OPTIONS string is
     `'d:t:O,FILE_NAME''.  The default is `'d:t:O,/tmp/comp_err.trace''.

   *  `--debug-info', `-T'

     Print some debugging information when the program exits.

   *  `--header_file=FILE_NAME', `-H FILE_NAME'

     The name of the error header file. The default is `mysqld_error.h'.

   *  `--in_file=FILE_NAME', `-F FILE_NAME'

     The name of the input file. The default is
     `../sql/share/errmsg.txt'.

   *  `--name_file=FILE_NAME', `-N FILE_NAME'

     The name of the error name file. The default is `mysqld_ername.h'.

   *  `--out_dir=PATH', `-D PATH'

     The name of the output base directory. The default is
     `../sql/share/'.

   *  `--out_file=FILE_NAME', `-O FILE_NAME'

     The name of the output file. The default is `errmsg.sys'.

   *  `--statefile=FILE_NAME', `-S FILE_NAME'

     The name for the SQLSTATE header file. The default is
     `sql_state.h'.

   *  `--version', `-V'

     Display version information and exit.


File: manual.info,  Node: mysqlbug,  Next: mysql-install-db,  Prev: comp-err,  Up: programs-installation

4.4.2 `mysqlbug' -- Generate Bug Report
---------------------------------------

This program is obsolete.

The normal way to report bugs is to visit `http://bugs.mysql.com/',
which is the address for our bugs database. This database is public and
can be browsed and searched by anyone. If you log in to the system, you
can enter new reports.


File: manual.info,  Node: mysql-install-db,  Next: mysql-plugin,  Prev: mysqlbug,  Up: programs-installation

4.4.3 `mysql_install_db' -- Initialize MySQL Data Directory
-----------------------------------------------------------

*Note `mysql_install_db': mysql-install-db. initializes the MySQL data
directory and creates the system tables that it contains, if they do
not exist. *Note `mysql_install_db': mysql-install-db. is a shell
script and is available only on Unix platforms. (As of MySQL 5.6, *Note
`mysql_install_db': mysql-install-db. is a Perl script and can be used
on any system with Perl installed.)

To invoke *Note `mysql_install_db': mysql-install-db, use the following
syntax:

     shell> mysql_install_db [OPTIONS]

Because the MySQL server, *Note `mysqld': mysqld, needs to access the
data directory when it runs later, you should either run *Note
`mysql_install_db': mysql-install-db. from the same system account that
will be used for running *Note `mysqld': mysqld.  or run it as `root'
and use the `--user' option to indicate the user name that *Note
`mysqld': mysqld. will run as. It might be necessary to specify other
options such as `--basedir' or `--datadir' if *Note `mysql_install_db':
mysql-install-db. does not use the correct locations for the
installation directory or data directory. For example:

     shell> scripts/mysql_install_db --user=mysql \
              --basedir=/opt/mysql/mysql \
              --datadir=/opt/mysql/mysql/data

*Note `mysql_install_db': mysql-install-db. needs to invoke *Note
`mysqld': mysqld. with the `--bootstrap' and `--skip-grant-tables'
options.

*Note*:

If you have set a custom `TMPDIR' environment variable when performing
the installation, and the specified directory is not accessible, *Note
`mysql_install_db': mysql-install-db. may fail. If so, unset `TMPDIR'
or set `TMPDIR' to point to the system temporary directory (usually
`/tmp').

*Note `mysql_install_db': mysql-install-db. supports the following
options, which can be specified on the command line or in the
`[mysql_install_db]' group of an option file.  (Options that are common
to *Note `mysqld': mysqld. can also be specified in the `[mysqld]'
group.) Other options are passed to *Note `mysqld': mysqld. For
information about option files, see *Note option-files::.  *Note
`mysql_install_db': mysql-install-db. also supports the options for
processing option files described at *Note option-file-options::.

   *  `--basedir=PATH'

     The path to the MySQL installation directory.

   *  `--datadir=PATH', `--ldata=PATH'

     The path to the MySQL data directory.

   *  `--force'

     Cause *Note `mysql_install_db': mysql-install-db. to run even if
     DNS does not work. Grant table entries that normally use host
     names will use IP addresses.

   *  `--rpm'

     For internal use. This option is used during the MySQL
     installation process for install operations performed using RPM
     packages.

   *  `--skip-name-resolve'

     Use IP addresses rather than host names when creating grant table
     entries. This option can be useful if your DNS does not work.

   *  `--srcdir=PATH'

     For internal use. This option specifies the directory under which
     *Note `mysql_install_db': mysql-install-db. looks for support
     files such as the error message file and the file for populating
     the help tables.

   *  `--user=USER_NAME'

     The system (login) user name to use for running *Note `mysqld':
     mysqld. Files and directories created by *Note `mysqld': mysqld.
     will be owned by this user. You must be `root' to use this option.
     By default, *Note `mysqld': mysqld. runs using your current login
     name and files and directories that it creates will be owned by
     you.

   *  `--verbose'

     Verbose mode. Print more information about what the program does.

   *  `--windows'

     For internal use. This option is used for creating Windows
     distributions.


File: manual.info,  Node: mysql-plugin,  Next: mysql-secure-installation,  Prev: mysql-install-db,  Up: programs-installation

4.4.4 `mysql_plugin' -- Configure MySQL Server Plugins
------------------------------------------------------

The *Note `mysql_plugin': mysql-plugin. utility enables MySQL
administrators to manage which plugins a MySQL server loads. It
provides an alternative to manually specifying the `--plugin-load'
option at server startup or using the *Note `INSTALL PLUGIN':
install-plugin. and *Note `UNINSTALL PLUGIN': uninstall-plugin.
statements at runtime.  *Note `mysql_plugin': mysql-plugin. is
available as of MySQL 5.5.16.

Depending on whether *Note `mysql_plugin': mysql-plugin. is invoked to
enable or disable plugins, it inserts or deletes rows in the
`mysql.plugin' table that serves as a plugin registry. (To perform this
operation, *Note `mysql_plugin': mysql-plugin. invokes the MySQL server
in bootstrap mode. This means that the server must not already be
running.) For normal server startups, the server loads and enables
plugins listed in `mysql.plugin' automatically. For additional control
over plugin activation, use `--PLUGIN_NAME' options named for specific
plugins, as described in *Note server-plugin-loading::.

Each invocation of *Note `mysql_plugin': mysql-plugin. reads a
configuration file to determine how to configure the plugins contained
in a single plugin library object file. To invoke *Note `mysql_plugin':
mysql-plugin, use this syntax:

     mysql_plugin [OPTIONS] PLUGIN {ENABLE|DISABLE}

PLUGIN is the name of the plugin to configure. `ENABLE' or `DISABLE'
(not case sensitive) specify whether to enable or disable components of
the plugin library named in the configuration file. The order of the
PLUGIN and `ENABLE' or `DISABLE' arguments does not matter.

For example, to configure components of a plugin library file named
`myplugins.so' on Linux or `myplugins.dll' on Windows, specify a PLUGIN
value of `myplugins'. Suppose that this plugin library contains three
plugins, `plugin1', `plugin2', and `plugin3', all of which should be
configured under *Note `mysql_plugin': mysql-plugin. control. By
convention, configuration files have a suffix of `.ini' and the same
basename as the plugin library, so the default configuration file name
for this plugin library is `myplugins.ini'. The configuration file
contents look like this:

     myplugins
     plugin1
     plugin2
     plugin3

The first line in the `myplugins.ini' file is the name of the library
object file, without any extension such as `.so' or `.dll'. The
remaining lines are the names of the components to be enabled or
disabled. Each value in the file should be on a separate line.  Lines
on which the first character is `'#'' are taken as comments and ignored.

To enable the plugins listed in the configuration file, invoke *Note
`mysql_plugin': mysql-plugin. this way:

     shell> mysql_plugin myplugins ENABLE

To disable the plugins, use `DISABLE' rather than `ENABLE'.

An error occurs if *Note `mysql_plugin': mysql-plugin. cannot find the
configuration file or plugin library file, or if *Note `mysql_plugin':
mysql-plugin. cannot start the MySQL server.

*Note `mysql_plugin': mysql-plugin. supports the following options,
which can be specified on the command line or in the `[mysqld]' group
of any option file. For options specified in a `[mysqld]' group, *Note
`mysql_plugin': mysql-plugin. recognizes the `--basedir', `--datadir',
and `--plugin-dir' options and ignores others. For information about
option files, see *Note option-files::.

*`mysql_plugin' Options*

Format      Option File Description
-basedir=pathbasedir=pathThe server base directory
-datadir=pathdatadir=pathThe server data directory
-help                   Display help message and exit
-my-print-defaults=pathmy-print-defaults=pathThe path to my_print_defaults
-mysqld=pathmysqld=path The path to the server
-no-defaultsno-defaults Do not read configuration
                        file
-plugin-dir=pathplugin-dir=pathThe directory where plugins
                        are located
-plugin-ini=file_nameplugin-ini=file_nameThe plugin configuration file
-print-defaultsprint-defaultsShow configuration file
                        defaults
-verbose                Verbose mode
-version                Display version information
                        and exit

   *  `--help', `-?'

     Display a help message and exit.

   *  `--basedir=PATH', `-b PATH'

     The server base directory.

   *  `--datadir=PATH', `-d PATH'

     The server data directory.

   *  `--my-print-defaults=PATH', `-b PATH'

     The path to the *Note `my_print_defaults': my-print-defaults.
     program.

   *  `--mysqld=PATH', `-b PATH'

     The path to the *Note `mysqld': mysqld. server.

   *  `--no-defaults', `-p'

     Do not read values from the configuration file. This option
     enables an administrator to skip reading defaults from the
     configuration file.

     With *Note `mysql_plugin': mysql-plugin, this option need not be
     given first on the command line, unlike most other MySQL programs
     that support `--no-defaults'.

   *  `--plugin-dir=PATH', `-p PATH'

     The server plugin directory.

   *  `--plugin-ini=FILE_NAME', `-i FILE_NAME'

     The *Note `mysql_plugin': mysql-plugin. configuration file.
     Relative path names are interpreted relative to the current
     directory. If this option is not given, the default is `PLUGIN.ini'
     in the plugin directory, where PLUGIN is the PLUGIN argument on
     the command line.

   *  `--print-defaults', `-P'

     Display the default values from the configuration file. This
     option causes *Note `mysql_plugin': mysql-plugin. to print the
     defaults for `--basedir', `--datadir', and `--plugin-dir' if they
     are found in the configuration file. If no value for a variable is
     found, nothing is shown.

     With *Note `mysql_plugin': mysql-plugin, this option need not be
     given first on the command line, unlike most other MySQL programs
     that support `--print-defaults'.

   *  `--verbose', `-v'

     Verbose mode. Print more information about what the program does.
     This option can be used multiple times to increase the amount of
     information.

   *  `--version', `-V'

     Display version information and exit.


File: manual.info,  Node: mysql-secure-installation,  Next: mysql-tzinfo-to-sql,  Prev: mysql-plugin,  Up: programs-installation

4.4.5 `mysql_secure_installation' -- Improve MySQL Installation Security
------------------------------------------------------------------------

This program enables you to improve the security of your MySQL
installation in the following ways:

   * You can set a password for `root' accounts.

   * You can remove `root' accounts that are accessible from outside
     the local host.

   * You can remove anonymous-user accounts.

   * You can remove the `test' database (which by default can be
     accessed by all users, even anonymous users), and privileges that
     permit anyone to access databases with names that start with
     `test_'.

*Note `mysql_secure_installation': mysql-secure-installation. helps you
implement security recommendations similar to those described at *Note
default-privileges::.

Invoke *Note `mysql_secure_installation': mysql-secure-installation.
without arguments:

     shell> mysql_secure_installation

The script will prompt you to determine which actions to perform.


File: manual.info,  Node: mysql-tzinfo-to-sql,  Next: mysql-upgrade,  Prev: mysql-secure-installation,  Up: programs-installation

4.4.6 `mysql_tzinfo_to_sql' -- Load the Time Zone Tables
--------------------------------------------------------

The *Note `mysql_tzinfo_to_sql': mysql-tzinfo-to-sql. program loads the
time zone tables in the `mysql' database. It is used on systems that
have a _zoneinfo_ database (the set of files describing time zones).
Examples of such systems are Linux, FreeBSD, Solaris, and Mac OS X. One
likely location for these files is the `/usr/share/zoneinfo' directory
(`/usr/share/lib/zoneinfo' on Solaris). If your system does not have a
zoneinfo database, you can use the downloadable package described in
*Note time-zone-support::.

*Note `mysql_tzinfo_to_sql': mysql-tzinfo-to-sql. can be invoked several
ways:

     shell> mysql_tzinfo_to_sql TZ_DIR
     shell> mysql_tzinfo_to_sql TZ_FILE TZ_NAME
     shell> mysql_tzinfo_to_sql --leap TZ_FILE

For the first invocation syntax, pass the zoneinfo directory path name
to *Note `mysql_tzinfo_to_sql': mysql-tzinfo-to-sql. and send the
output into the *Note `mysql': mysql. program. For example:

     shell> mysql_tzinfo_to_sql /usr/share/zoneinfo | mysql -u root mysql

*Note `mysql_tzinfo_to_sql': mysql-tzinfo-to-sql. reads your system's
time zone files and generates SQL statements from them.  *Note `mysql':
mysql. processes those statements to load the time zone tables.

The second syntax causes *Note `mysql_tzinfo_to_sql':
mysql-tzinfo-to-sql.  to load a single time zone file TZ_FILE that
corresponds to a time zone name TZ_NAME:

     shell> mysql_tzinfo_to_sql TZ_FILE TZ_NAME | mysql -u root mysql

If your time zone needs to account for leap seconds, invoke *Note
`mysql_tzinfo_to_sql': mysql-tzinfo-to-sql. using the third syntax,
which initializes the leap second information.  TZ_FILE is the name of
your time zone file:

     shell> mysql_tzinfo_to_sql --leap TZ_FILE | mysql -u root mysql

After running *Note `mysql_tzinfo_to_sql': mysql-tzinfo-to-sql, it is
best to restart the server so that it does not continue to use any
previously cached time zone data.


File: manual.info,  Node: mysql-upgrade,  Prev: mysql-tzinfo-to-sql,  Up: programs-installation

4.4.7 `mysql_upgrade' -- Check and Upgrade MySQL Tables
-------------------------------------------------------

*Note `mysql_upgrade': mysql-upgrade. examines all tables in all
databases for incompatibilities with the current version of MySQL
Server. *Note `mysql_upgrade': mysql-upgrade. also upgrades the system
tables so that you can take advantage of new privileges or capabilities
that might have been added.

*Note `mysql_upgrade': mysql-upgrade. should be executed each time you
upgrade MySQL.

If *Note `mysql_upgrade': mysql-upgrade. finds that a table has a
possible incompatibility, it performs a table check and, if problems
are found, attempts a table repair. If the table cannot be repaired,
see *Note rebuilding-tables:: for manual table repair strategies.

*Note*:

On Windows Server 2008, Vista, and newer, you must run *Note
`mysql_upgrade': mysql-upgrade. with administrator privileges. You can
do this by running a Command Prompt as Administrator and running the
command. Failure to do so may result in the upgrade failing to execute
correctly.

*Caution*:

You should always back up your current MySQL installation _before_
performing an upgrade. See *Note backup-methods::.

Some upgrade incompatibilities may require special handling before you
upgrade your MySQL installation and run *Note `mysql_upgrade':
mysql-upgrade. See *Note upgrading::, for instructions on determining
whether any such incompatibilities apply to your installation and how
to handle them.

To use *Note `mysql_upgrade': mysql-upgrade, make sure that the server
is running, and then invoke it like this:

     shell> mysql_upgrade [OPTIONS]

After running *Note `mysql_upgrade': mysql-upgrade, stop the server and
restart it so that any changes made to the system tables take effect.

*Note `mysql_upgrade': mysql-upgrade. executes the following commands
to check and repair tables and to upgrade the system tables:

     mysqlcheck --all-databases --check-upgrade --auto-repair
     mysql < FIX_PRIV_TABLES
     mysqlcheck --all-databases --check-upgrade --fix-db-names --fix-table-names

Notes about the preceding commands:

   * Because *Note `mysql_upgrade': mysql-upgrade. invokes *Note
     `mysqlcheck': mysqlcheck. with the `--all-databases' option, it
     processes all tables in all databases, which might take a long
     time to complete. Each table is locked and therefore unavailable
     to other sessions while it is being processed.  Check and repair
     operations can be time-consuming, particularly for large tables.

   * For details about what checks the `--check-upgrade' option
     entails, see the description of the `FOR UPGRADE' option of the
     *Note `CHECK TABLE': check-table. statement (see *Note
     check-table::).

   * FIX_PRIV_TABLES represents a script generated internally by *Note
     `mysql_upgrade': mysql-upgrade. that contains SQL statements to
     upgrade the tables in the `mysql' database.

All checked and repaired tables are marked with the current MySQL
version number. This ensures that next time you run *Note
`mysql_upgrade': mysql-upgrade. with the same version of the server, it
can tell whether there is any need to check or repair the table again.

*Note `mysql_upgrade': mysql-upgrade. also saves the MySQL version
number in a file named `mysql_upgrade_info' in the data directory. This
is used to quickly check whether all tables have been checked for this
release so that table-checking can be skipped. To ignore this file and
perform the check regardless, use the `--force' option.

If you install MySQL from RPM packages on Linux, you must install the
server and client RPMs.  *Note `mysql_upgrade': mysql-upgrade. is
included in the server RPM but requires the client RPM because the
latter includes *Note `mysqlcheck': mysqlcheck. (See *Note
linux-installation-rpm::.)

*Note `mysql_upgrade': mysql-upgrade. does not upgrade the contents of
the help tables. For upgrade instructions, see *Note
server-side-help-support::.

*Note `mysql_upgrade': mysql-upgrade. supports the following options,
which can be specified on the command line or in the `[mysql_upgrade]'
and `[client]' groups of an option file. Other options are passed to
*Note `mysqlcheck': mysqlcheck. For example, it might be necessary to
specify the `--password[=PASSWORD]' option. *Note `mysql_upgrade':
mysql-upgrade. also supports the options for processing option files
described at *Note option-file-options::.

*`mysql_upgrade' Options*

Format      Option File Description                   Introduced
-basedir    basedir     Not used; exists only for     
                        compatibility with some very  
                        old applications              
-character-sets-dir=pathcharacter-sets-dirDirectory where character     
                        sets are.                     
-compress   compress    Use compression in            
                        server/client protocol.       
-datadir=pathdatadir     Not used; exists only for     
                        compatibility with some very  
                        old applications              
-debug[=#]  debug       If this is a non-debug        
                        version, catch error and      
                        exit.                         
-debug-checkdebug-check -debug-check Check memory     
                        and open file usage at exit.  
-default-auth=plugindefault-auth=pluginThe authentication plugin to  5.5.10
                        use                           
-default-character-set=namedefault-character-setSet the default character     
                        set.                          
-force      force       Force execution even if       
                        mysql_upgrade has already     
                        been executed for the         
                        current version of MySQL.     
-help       help        Display a help message and    
                        exit                          
-host=name  host        Connect to host.              
-password[=name]password    Password to use when          
                        connecting to server. If      
                        password is not given it's    
                        solicited on the tty.         
-plugin-dir=pathplugin-dir=pathThe directory where plugins   5.5.10
                        are located                   
-port=#     port        Port number to use for        
                        connection or 0 for default   
                        to, in order of preference,   
                        my.cnf, $MYSQL_TCP_PORT,      
                        /etc/services, built-in       
                        default (3306).               
-protocol=nameprotocol    The connection protocol       
                        (TCP=default, socket, pipe,   
                        memory)                       
-socket=namesocket      Socket file to use for        
                        connection.                   
-tmpdir=pathtmpdir      Directory for temporary files 
-user=name  user        User for login if not         
                        current user.                 
-verbose    verbose     Show more information about   
                        the process                   
-version-checkversion-checkShow more information about   5.5.32
                        the process                   
-write-binlogwrite-binlogEnables binary logging of     
                        all commands including        
                        mysqlcheck.                   

   *  `--help'

     Display a short help message and exit.

   *  `--basedir=PATH'

     The path to the MySQL installation directory. This option is
     accepted for backward compatibility but ignored. It is removed in
     MySQL 5.7.

   *  `--datadir=PATH'

     The path to the data directory. This option is accepted for
     backward compatibility but ignored. It is removed in MySQL 5.7.

   *  `--debug-check'

     Print some debugging information when the program exits.

   *  `--debug-info', `-T'

     Print debugging information and memory and CPU usage statistics
     when the program exits.

   *  `--default-auth=PLUGIN'

     The client-side authentication plugin to use. See *Note
     pluggable-authentication::.

     This option was added in MySQL 5.5.10.

   *  `--force'

     Ignore the `mysql_upgrade_info' file and force execution of *Note
     `mysqlcheck': mysqlcheck. even if *Note `mysql_upgrade':
     mysql-upgrade. has already been executed for the current version
     of MySQL.

   *  `--plugin-dir=PATH'

     The directory in which to look for plugins. It may be necessary to
     specify this option if the `--default-auth' option is used to
     specify an authentication plugin but *Note `mysql_upgrade':
     mysql-upgrade. does not find it. See *Note
     pluggable-authentication::.

     This option was added in MySQL 5.5.10.

   *  `--tmpdir=PATH', `-t PATH'

     The path name of the directory to use for creating temporary files.

   *  `--upgrade-system-tables', `-s'

     Upgrade only the system tables, do not upgrade data.

   *  `--user=USER_NAME', `-u USER_NAME'

     The MySQL user name to use when connecting to the server.  The
     default user name is `root'.

   *  `--verbose'

     Verbose mode. Print more information about what the program does.

   *  `--version-check', `-k'

     Check the version of the server to which *Note `mysql_upgrade':
     mysql-upgrade. is connecting to verify that it is the same as the
     version for which *Note `mysql_upgrade': mysql-upgrade. was built.
     If not, *Note `mysql_upgrade': mysql-upgrade. exits. This option is
     enabled by default; to disable the check, use
     `--skip-version-check'. This option was added in MySQL 5.5.32.

   *  `--write-binlog'

     Cause binary logging to be enabled while *Note `mysql_upgrade':
     mysql-upgrade. runs. This is the default behavior; to disable
     binary logging during the upgrade, use the inverse of this option
     (that is, start the program with `--skip-write-binlog').


File: manual.info,  Node: programs-client,  Next: programs-admin-utils,  Prev: programs-installation,  Up: programs

4.5 MySQL Client Programs
=========================

* Menu:

* mysql::                        `mysql' --- The MySQL Command-Line Tool
* mysqladmin::                   `mysqladmin' --- Client for Administering a MySQL Server
* mysqlcheck::                   `mysqlcheck' --- A Table Maintenance Program
* mysqldump::                    `mysqldump' --- A Database Backup Program
* mysqlimport::                  `mysqlimport' --- A Data Import Program
* mysqlshow::                    `mysqlshow' --- Display Database, Table, and Column Information
* mysqlslap::                    `mysqlslap' --- Load Emulation Client

This section describes client programs that connect to the MySQL server.


File: manual.info,  Node: mysql,  Next: mysqladmin,  Prev: programs-client,  Up: programs-client

4.5.1 `mysql' -- The MySQL Command-Line Tool
--------------------------------------------

* Menu:

* mysql-command-options::        `mysql' Options
* mysql-commands::               `mysql' Commands
* mysql-logging::                `mysql' Logging
* mysql-server-side-help::       `mysql' Server-Side Help
* mysql-batch-commands::         Executing SQL Statements from a Text File
* mysql-tips::                   `mysql' Tips

*Note `mysql': mysql. is a simple SQL shell with input line editing
capabilities. It supports interactive and noninteractive use. When used
interactively, query results are presented in an ASCII-table format.
When used noninteractively (for example, as a filter), the result is
presented in tab-separated format. The output format can be changed
using command options.

If you have problems due to insufficient memory for large result sets,
use the `--quick' option. This forces *Note `mysql': mysql. to retrieve
results from the server a row at a time rather than retrieving the
entire result set and buffering it in memory before displaying it. This
is done by returning the result set using the *Note
`mysql_use_result()': mysql-use-result. C API function in the
client/server library rather than *Note `mysql_store_result()':
mysql-store-result.

Using *Note `mysql': mysql. is very easy. Invoke it from the prompt of
your command interpreter as follows:

     shell> mysql DB_NAME

Or:

     shell> mysql --user=USER_NAME --password=YOUR_PASSWORD DB_NAME

Then type an SQL statement, end it with ``;'', `\g', or `\G' and press
Enter.

Typing `Control+C' causes *Note `mysql': mysql. to attempt to kill the
current statement. If this cannot be done, or `Control+C' is typed
again before the statement is killed, *Note `mysql': mysql. exits.

You can execute SQL statements in a script file (batch file) like this:

     shell> mysql DB_NAME < SCRIPT.SQL > OUTPUT.TAB

On Unix, the *Note `mysql': mysql. client logs statements executed
interactively to a history file. See *Note mysql-logging::.


File: manual.info,  Node: mysql-command-options,  Next: mysql-commands,  Prev: mysql,  Up: mysql

4.5.1.1 `mysql' Options
.......................

*Note `mysql': mysql. supports the following options, which can be
specified on the command line or in the `[mysql]' and `[client]' groups
of an option file. *Note `mysql': mysql. also supports the options for
processing option files described at *Note option-file-options::.

*`mysql' Options*

Format      Option File Description                   IntroducedRemoved
-auto-rehashauto-rehash Enable automatic rehashing            
-auto-vertical-outputauto-vertical-outputEnable automatic vertical     5.5.3   
                        result set display                    
-batch      batch       Don't use history file                
-character-sets-dir=pathcharacter-sets-dirSet the default character set         
-column-namescolumn-namesWrite column names in results         
-column-type-infocolumn-type-infoDisplay result set metadata           
-comments   comments    Whether to retain or strip            
                        comments in statements sent           
                        to the server                         
-compress   compress    Compress all information              
                        sent between the client and           
                        the server                            
-connect_timeout=valueconnect_timeoutThe number of seconds before          
                        connection timeout                    
-database=dbnamedatabase    The database to use                   
-debug[=debug_options]debug       Write a debugging log                 
-debug-checkdebug-check Print debugging information           
                        when the program exits                
-debug-info debug-info  Print debugging information,          
                        memory and CPU statistics             
                        when the program exits                
-default-auth=plugindefault-auth=pluginThe authentication plugin to  5.5.7   
                        use                                   
-default-character-set=charset_namedefault-character-setUse charset_name as the               
                        default character set                 
-delimiter=strdelimiter   Set the statement delimiter           
-enable-cleartext-pluginenable-cleartext-pluginEnable cleartext              5.5.27  
                        authentication plugin                 
-execute=statementexecute     Execute the statement and             
                        quit                                  
-force      force       Continue even if an SQL               
                        error occurs                          
-help                   Display help message and exit         
-host=host_namehost        Connect to the MySQL server           
                        on the given host                     
-html       html        Produce HTML output                   
-ignore-spacesignore-spacesIgnore spaces after function          
                        names                                 
-init-command=strinit-commandSQL statement to execute              
                        after connecting                      
-line-numbersline-numbersWrite line numbers for errors         
-local-infile[={0|1}]local-infileEnable or disable for LOCAL           
                        capability for LOAD DATA              
                        INFILE                                
-max_allowed_packet=valuemax_allowed_packetThe maximum packet length to          
                        send to or receive from the           
                        server                                
-max_join_size=valuemax_join_sizeThe automatic limit for rows          
                        in a join when using                  
                        -safe-updates                         
-named-commandsnamed-commandsEnable named mysql commands           
-net_buffer_length=valuenet_buffer_lengthThe buffer size for TCP/IP            
                        and socket communication              
-no-auto-rehash            Disable automatic rehashing           
-no-beep    no-beep     Do not beep when errors occur         
-no-named-commandsno-named-commandsDisable named mysql commands          5.5.3
-no-pager   no-pager    Deprecated form of                    5.5.3
                        -skip-pager                           
-no-tee     no-tee      Do not copy output to a file          5.5.3
-one-databaseone-databaseIgnore statements except              
                        those for the default                 
                        database named on the                 
                        command line                          
-pager[=command]pager       Use the given command for             
                        paging query output                   
-password[=password]password    The password to use when              
                        connecting to the server              
-pipe                   On Windows, connect to                
                        server using a named pipe             
-plugin-dir=pathplugin-dir=pathThe directory where plugins   5.5.7   
                        are located                           
-port=port_numport        The TCP/IP port number to             
                        use for the connection                
-prompt=format_strprompt      Set the prompt to the                 
                        specified format                      
-protocol=typeprotocol    The connection protocol to            
                        use                                   
-quick      quick       Do not cache each query               
                        result                                
-raw        raw         Write column values without           
                        escape conversion                     
-reconnect  reconnect   If the connection to the              
                        server is lost,                       
                        automatically try to                  
                        reconnect                             
-safe-updatessafe-updatesAllow only UPDATE and DELETE          
                        statements that specify key           
                        values                                
-secure-authsecure-auth Do not send passwords to the          
                        server in old (pre-4.1.1)             
                        format                                
-select_limit=valueselect_limitThe automatic limit for               
                        SELECT statements when using          
                        -safe-updates                         
-show-warningsshow-warningsShow warnings after each              
                        statement if there are any            
-sigint-ignoresigint-ignoreIgnore SIGINT signals                 
                        (typically the result of              
                        typing Control+C)                     
-silent     silent      Silent mode                           
-skip-auto-rehashskip-auto-rehashDisable automatic rehashing           
-skip-column-namesskip-column-namesDo not write column names in          
                        results                               
-skip-line-numbersskip-line-numbersSkip line numbers for errors          
-skip-named-commandsskip-named-commandsDisable named mysql commands          
-skip-pager skip-pager  Disable paging                        
-skip-reconnectskip-reconnectDisable reconnecting                  
-socket=pathsocket      For connections to localhost          
-ssl-ca=file_namessl-ca      The path to a file that               
                        contains a list of trusted            
                        SSL CAs                               
-ssl-capath=dir_namessl-capath  The path to a directory that          
                        contains trusted SSL CA               
                        certificates in PEM format            
-ssl-cert=file_namessl-cert    The name of the SSL                   
                        certificate file to use for           
                        establishing a secure                 
                        connection                            
-ssl-cipher=cipher_listssl-cipher  A list of allowable ciphers           
                        to use for SSL encryption             
-ssl-key=file_namessl-key     The name of the SSL key file          
                        to use for establishing a             
                        secure connection                     
-ssl-verify-server-certssl-verify-server-certThe server's Common Name              
                        value in its certificate is           
                        verified against the host             
                        name used when connecting to          
                        the server                            
-table      table       Display output in tabular             
                        format                                
-tee=file_nametee         Append a copy of output to            
                        the given file                        
-unbuffered unbuffered  Flush the buffer after each           
                        query                                 
-user=user_nameuser        MySQL user name to use when           
                        connecting to server                  
-verbose                Verbose mode                          
-version                Display version information           
                        and exit                              
-vertical   vertical    Print query output rows               
                        vertically (one line per              
                        column value)                         
-wait       wait        If the connection cannot be           
                        established, wait and retry           
                        instead of aborting                   
-xml        xml         Produce XML output                    

   *  `--help', `-?'

     Display a help message and exit.

   *  `--auto-rehash'

     Enable automatic rehashing. This option is on by default, which
     enables database, table, and column name completion.  Use
     `--disable-auto-rehash' to disable rehashing. That causes *Note
     `mysql': mysql.  to start faster, but you must issue the `rehash'
     command if you want to use name completion.

     To complete a name, enter the first part and press Tab. If the
     name is unambiguous, *Note `mysql': mysql. completes it.
     Otherwise, you can press Tab again to see the possible names that
     begin with what you have typed so far. Completion does not occur
     if there is no default database.

   *  `--auto-vertical-output'

     Cause result sets to be displayed vertically if they are too wide
     for the current window, and using normal tabular format otherwise.
     (This applies to statements terminated by `;' or `\G'.) This option
     was added in MySQL 5.5.3.

   *  `--batch', `-B'

     Print results using tab as the column separator, with each row on
     a new line. With this option, *Note `mysql': mysql. does not use
     the history file.

     Batch mode results in nontabular output format and escaping of
     special characters. Escaping may be disabled by using raw mode;
     see the description for the `--raw' option.

   *  `--bind-address=IP_ADDRESS'

     On a computer having multiple network interfaces, this option can
     be used to select which interface is employed when connecting to
     the MySQL server.

     This option is supported only in the version of the *Note `mysql':
     mysql. client that is supplied with MySQL Cluster. It is not
     available in standard MySQL Server 5.5 releases.

   *  `--character-sets-dir=PATH'

     The directory where character sets are installed. See *Note
     charset-configuration::.

   *  `--column-names'

     Write column names in results.

   *  `--column-type-info', `-m'

     Display result set metadata.

   *  `--comments', `-c'

     Whether to preserve comments in statements sent to the server. The
     default is -skip-comments (discard comments), enable with
     -comments (preserve comments).

   *  `--compress', `-C'

     Compress all information sent between the client and the server if
     both support compression.

   *  `--database=DB_NAME', `-D DB_NAME'

     The database to use. This is useful primarily in an option file.

   *  `--debug[=DEBUG_OPTIONS]', `-# [DEBUG_OPTIONS]'

     Write a debugging log. A typical DEBUG_OPTIONS string is
     `'d:t:o,FILE_NAME''.  The default is `'d:t:o,/tmp/mysql.trace''.

   *  `--debug-check'

     Print some debugging information when the program exits.

   *  `--debug-info', `-T'

     Print debugging information and memory and CPU usage statistics
     when the program exits.

   *  `--default-auth=PLUGIN'

     The client-side authentication plugin to use. See *Note
     pluggable-authentication::.

     This option was added in MySQL 5.5.7.

   *  `--default-character-set=CHARSET_NAME'

     Use CHARSET_NAME as the default character set for the client and
     connection.

     A common issue that can occur when the operating system uses
     `utf8' or another multi-byte character set is that output from the
     *Note `mysql': mysql. client is formatted incorrectly, due to the
     fact that the MySQL client uses the `latin1' character set by
     default.  You can usually fix such issues by using this option to
     force the client to use the system character set instead.

     See *Note charset-configuration::, for more information.

   *  `--delimiter=STR'

     Set the statement delimiter. The default is the semicolon
     character (``;'').

   *  `--disable-named-commands'

     Disable named commands. Use the `\*' form only, or use named
     commands only at the beginning of a line ending with a semicolon
     (``;'').  *Note `mysql': mysql. starts with this option _enabled_
     by default. However, even with this option, long-format commands
     still work from the first line. See *Note mysql-commands::.

   *  `--enable-cleartext-plugin'

     Enable the `mysql_clear_password' cleartext authentication plugin.
     (See *Note cleartext-authentication-plugin::.) This option was
     added in MySQL 5.5.27.

   *  `--execute=STATEMENT', `-e STATEMENT'

     Execute the statement and quit. The default output format is like
     that produced with `--batch'. See *Note command-line-options::,
     for some examples.  With this option, *Note `mysql': mysql. does
     not use the history file.

   *  `--force', `-f'

     Continue even if an SQL error occurs.

   *  `--host=HOST_NAME', `-h HOST_NAME'

     Connect to the MySQL server on the given host.

   *  `--html', `-H'

     Produce HTML output.

   *  `--ignore-spaces', `-i'

     Ignore spaces after function names. The effect of this is
     described in the discussion for the `IGNORE_SPACE' SQL mode (see
     *Note server-sql-mode::).

   *  `--init-command=str'

     SQL statement to execute after connecting to the server. If
     auto-reconnect is enabled, the statement is executed again after
     reconnection occurs.

   *  `--line-numbers'

     Write line numbers for errors. Disable this with
     `--skip-line-numbers'.

   *  `--local-infile[={0|1}]'

     Enable or disable `LOCAL' capability for *Note `LOAD DATA INFILE':
     load-data. With no value, the option enables `LOCAL'. The option
     may be given as `--local-infile=0' or `--local-infile=1' to
     explicitly disable or enable `LOCAL'. Enabling `LOCAL' has no
     effect if the server does not also support it.

   *  `--named-commands', `-G'

     Enable named *Note `mysql': mysql. commands. Long-format commands
     are permitted, not just short-format commands. For example, `quit'
     and `\q' both are recognized. Use `--skip-named-commands' to
     disable named commands. See *Note mysql-commands::.

   *  `--no-auto-rehash', `-A'

     This has the same effect as `-skip-auto-rehash'.  See the
     description for `--auto-rehash'.

   *  `--no-beep', `-b'

     Do not beep when errors occur.

   *  `--no-named-commands', `-g'

     Deprecated, use `--disable-named-commands' instead.
     `--no-named-commands' was removed in MySQL 5.5.3.

   *  `--no-pager'

     Deprecated form of `--skip-pager'.  See the `--pager' option.
     `--no-pager' was removed in MySQL 5.5.3.

   *  `--no-tee'

     Deprecated form of `--skip-tee'.  See the `--tee' option.
     `--no-tee' is removed in MySQL 5.5.3.

   *  `--one-database', `-o'

     Ignore statements except those that occur while the default
     database is the one named on the command line. This option is
     rudimentary and should be used with care. Statement filtering is
     based only on *Note `USE': use. statements.

     Initially, *Note `mysql': mysql. executes statements in the input
     because specifying a database DB_NAME on the command line is
     equivalent to inserting *Note `USE DB_NAME': use. at the beginning
     of the input. Then, for each *Note `USE': use. statement
     encountered, *Note `mysql': mysql. accepts or rejects following
     statements depending on whether the database named is the one on
     the command line. The content of the statements is immaterial.

     Suppose that *Note `mysql': mysql. is invoked to process this set
     of statements:

          DELETE FROM db2.t2;
          USE db2;
          DROP TABLE db1.t1;
          CREATE TABLE db1.t1 (i INT);
          USE db1;
          INSERT INTO t1 (i) VALUES(1);
          CREATE TABLE db2.t1 (j INT);

     If the command line is *Note `mysql --force --one-database db1':
     mysql, *Note `mysql': mysql. handles the input as follows:

        * The *Note `DELETE': delete. statement is executed because the
          default database is `db1', even though the statement names a
          table in a different database.

        * The *Note `DROP TABLE': drop-table. and *Note `CREATE TABLE':
          create-table. statements are not executed because the default
          database is not `db1', even though the statements name a
          table in `db1'.

        * The *Note `INSERT': insert. and *Note `CREATE TABLE':
          create-table. statements are executed because the default
          database is `db1', even though the *Note `CREATE TABLE':
          create-table. statement names a table in a different database.

   *  `--pager[=COMMAND]'

     Use the given command for paging query output. If the command is
     omitted, the default pager is the value of your `PAGER'
     environment variable. Valid pagers are `less', `more', `cat [>
     filename]', and so forth. This option works only on Unix and only
     in interactive mode. To disable paging, use `--skip-pager'.  *Note
     mysql-commands::, discusses output paging further.

   *  `--password[=PASSWORD]', `-p[PASSWORD]'

     The password to use when connecting to the server. If you use the
     short option form (`-p'), you _cannot_ have a space between the
     option and the password. If you omit the PASSWORD value following
     the `--password' or `-p' option on the command line, *Note
     `mysql': mysql. prompts for one.

     Specifying a password on the command line should be considered
     insecure. See *Note password-security-user::. You can use an
     option file to avoid giving the password on the command line.

   *  `--pipe', `-W'

     On Windows, connect to the server using a named pipe. This option
     applies only if the server supports named-pipe connections.

   *  `--plugin-dir=PATH'

     The directory in which to look for plugins. It may be necessary to
     specify this option if the `--default-auth' option is used to
     specify an authentication plugin but *Note `mysql': mysql. does
     not find it. See *Note pluggable-authentication::.

     This option was added in MySQL 5.5.7.

   *  `--port=PORT_NUM', `-P PORT_NUM'

     The TCP/IP port number to use for the connection.

   *  `--prompt=FORMAT_STR'

     Set the prompt to the specified format. The default is `mysql>'.
     The special sequences that the prompt can contain are described in
     *Note mysql-commands::.

   *  `--protocol={TCP|SOCKET|PIPE|MEMORY}'

     The connection protocol to use for connecting to the server.  It
     is useful when the other connection parameters normally would
     cause a protocol to be used other than the one you want. For
     details on the permissible values, see *Note connecting::.

   *  `--quick', `-q'

     Do not cache each query result, print each row as it is received.
     This may slow down the server if the output is suspended. With
     this option, *Note `mysql': mysql. does not use the history file.

   *  `--raw', `-r'

     For tabular output, the `boxing' around columns enables one column
     value to be distinguished from another.  For nontabular output
     (such as is produced in batch mode or when the `--batch' or
     `--silent' option is given), special characters are escaped in the
     output so they can be identified easily. Newline, tab, `NUL', and
     backslash are written as `\n', `\t', `\0', and `\\'. The `--raw'
     option disables this character escaping.

     The following example demonstrates tabular versus nontabular
     output and the use of raw mode to disable escaping:

          % mysql
          mysql> SELECT CHAR(92);
          +----------+
          | CHAR(92) |
          +----------+
          | \        |
          +----------+

          % mysql -s
          mysql> SELECT CHAR(92);
          CHAR(92)
          \\

          % mysql -s -r
          mysql> SELECT CHAR(92);
          CHAR(92)
          \

   *  `--reconnect'

     If the connection to the server is lost, automatically try to
     reconnect. A single reconnect attempt is made each time the
     connection is lost. To suppress reconnection behavior, use
     `--skip-reconnect'.

   *  `--safe-updates', `--i-am-a-dummy', `-U'

     Permit only those *Note `UPDATE': update. and *Note `DELETE':
     delete. statements that specify which rows to modify by using key
     values. If you have set this option in an option file, you can
     override it by using `--safe-updates' on the command line. See
     *Note mysql-tips::, for more information about this option.

   *  `--secure-auth'

     Do not send passwords to the server in old (pre-4.1) format.  This
     prevents connections except for servers that use the newer
     password format.

     *Note*:

     Passwords that use the pre-4.1 hashing method are less secure than
     passwords that use the native password hashing method and should
     be avoided.

   *  `--show-warnings'

     Cause warnings to be shown after each statement if there are any.
     This option applies to interactive and batch mode.

   *  `--sigint-ignore'

     Ignore `SIGINT' signals (typically the result of typing
     `Control+C').

   *  `--silent', `-s'

     Silent mode. Produce less output. This option can be given
     multiple times to produce less and less output.

     This option results in nontabular output format and escaping of
     special characters. Escaping may be disabled by using raw mode;
     see the description for the `--raw' option.

   *  `--skip-column-names', `-N'

     Do not write column names in results.

   *  `--skip-line-numbers', `-L'

     Do not write line numbers for errors. Useful when you want to
     compare result files that include error messages.

   *  `--socket=PATH', `-S PATH'

     For connections to `localhost', the Unix socket file to use, or,
     on Windows, the name of the named pipe to use.

   *  `--ssl*'

     Options that begin with `--ssl' specify whether to connect to the
     server using SSL and indicate where to find SSL keys and
     certificates. See *Note ssl-options::.

   *  `--table', `-t'

     Display output in table format. This is the default for
     interactive use, but can be used to produce table output in batch
     mode.

   *  `--tee=FILE_NAME'

     Append a copy of output to the given file. This option works only
     in interactive mode. *Note mysql-commands::, discusses tee files
     further.

   *  `--unbuffered', `-n'

     Flush the buffer after each query.

   *  `--user=USER_NAME', `-u USER_NAME'

     The MySQL user name to use when connecting to the server.

   *  `--verbose', `-v'

     Verbose mode. Produce more output about what the program does.
     This option can be given multiple times to produce more and more
     output. (For example, `-v -v -v' produces table output format even
     in batch mode.)

   *  `--version', `-V'

     Display version information and exit.

   *  `--vertical', `-E'

     Print query output rows vertically (one line per column value).
     Without this option, you can specify vertical output for
     individual statements by terminating them with `\G'.

   *  `--wait', `-w'

     If the connection cannot be established, wait and retry instead of
     aborting.

   *  `--xml', `-X'

     Produce XML output.

          <field name="COLUMN_NAME">NULL</field>

     The output when `--xml' is used with *Note `mysql': mysql. matches
     that of *Note `mysqldump `--xml'': mysqldump. See *Note
     mysqldump:: for details.

     The XML output also uses an XML namespace, as shown here:

          shell> mysql --xml -uroot -e "SHOW VARIABLES LIKE 'version%'"
          <?xml version="1.0"?>

          <resultset statement="SHOW VARIABLES LIKE 'version%'" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
          <row>
          <field name="Variable_name">version</field>
          <field name="Value">5.0.40-debug</field>
          </row>

          <row>
          <field name="Variable_name">version_comment</field>
          <field name="Value">Source distribution</field>
          </row>

          <row>
          <field name="Variable_name">version_compile_machine</field>
          <field name="Value">i686</field>
          </row>

          <row>
          <field name="Variable_name">version_compile_os</field>
          <field name="Value">suse-linux-gnu</field>
          </row>
          </resultset>

     (See Bug #25946.)

You can also set the following variables by using `--VAR_NAME=VALUE'.
The `--set-variable' format is deprecated and was removed in MySQL
5.5.3.

   *  `connect_timeout'

     The number of seconds before connection timeout. (Default value is
     `0'.)

   *  `max_allowed_packet'

     The maximum size of the buffer for client/server communication.
     The default is 16MB, the maximum is 1GB.

   *  `max_join_size'

     The automatic limit for rows in a join when using
     `--safe-updates'. (Default value is 1,000,000.)

   *  `net_buffer_length'

     The buffer size for TCP/IP and socket communication.  (Default
     value is 16KB.)

   *  `select_limit'

     The automatic limit for *Note `SELECT': select. statements when
     using `--safe-updates'. (Default value is 1,000.)


File: manual.info,  Node: mysql-commands,  Next: mysql-logging,  Prev: mysql-command-options,  Up: mysql

4.5.1.2 `mysql' Commands
........................

*Note `mysql': mysql. sends each SQL statement that you issue to the
server to be executed. There is also a set of commands that *Note
`mysql': mysql. itself interprets. For a list of these commands, type
`help' or `\h' at the `mysql>' prompt:

     mysql> help

     List of all MySQL commands:
     Note that all text commands must be first on line and end with ';'
     ?         (\?) Synonym for `help'.
     clear     (\c) Clear command.
     connect   (\r) Reconnect to the server. Optional arguments are db and host.
     delimiter (\d) Set statement delimiter.
     edit      (\e) Edit command with $EDITOR.
     ego       (\G) Send command to mysql server, display result vertically.
     exit      (\q) Exit mysql. Same as quit.
     go        (\g) Send command to mysql server.
     help      (\h) Display this help.
     nopager   (\n) Disable pager, print to stdout.
     notee     (\t) Don't write into outfile.
     pager     (\P) Set PAGER [to_pager]. Print the query results via PAGER.
     print     (\p) Print current command.
     prompt    (\R) Change your mysql prompt.
     quit      (\q) Quit mysql.
     rehash    (\#) Rebuild completion hash.
     source    (\.) Execute an SQL script file. Takes a file name as an argument.
     status    (\s) Get status information from the server.
     system    (\!) Execute a system shell command.
     tee       (\T) Set outfile [to_outfile]. Append everything into given
                    outfile.
     use       (\u) Use another database. Takes database name as argument.
     charset   (\C) Switch to another charset. Might be needed for processing
                    binlog with multi-byte charsets.
     warnings  (\W) Show warnings after every statement.
     nowarning (\w) Don't show warnings after every statement.

     For server side help, type 'help contents'

Each command has both a long and short form. The long form is not case
sensitive; the short form is. The long form can be followed by an
optional semicolon terminator, but the short form should not.

The use of short-form commands within multi-line `/* ...  */' comments
is not supported.

   * `help [ARG]', `\h [ARG]', `\? [ARG]', `? [ARG]'

     Display a help message listing the available *Note `mysql': mysql.
     commands.

     If you provide an argument to the `help' command, *Note `mysql':
     mysql. uses it as a search string to access server-side help from
     the contents of the MySQL Reference Manual. For more information,
     see *Note mysql-server-side-help::.

   * `charset CHARSET_NAME', `\C CHARSET_NAME'

     Change the default character set and issue a `SET NAMES'
     statement. This enables the character set to remain synchronized
     on the client and server if *Note `mysql': mysql. is run with
     auto-reconnect enabled (which is not recommended), because the
     specified character set is used for reconnects.

   * `clear', `\c'

     Clear the current input. Use this if you change your mind about
     executing the statement that you are entering.

   * `connect [DB_NAME HOST_NAME]]', `\r [DB_NAME HOST_NAME]]'

     Reconnect to the server. The optional database name and host name
     arguments may be given to specify the default database or the host
     where the server is running. If omitted, the current values are
     used.

   * `delimiter STR', `\d STR'

     Change the string that *Note `mysql': mysql. interprets as the
     separator between SQL statements. The default is the semicolon
     character (``;'').

     The delimiter string can be specified as an unquoted or quoted
     argument on the `delimiter' command line. Quoting can be done with
     either single quote (`''), double quote (`"'), or backtick (``')
     characters. To include a quote within a quoted string, either
     quote the string with a different quote character or escape the
     quote with a backslash (``\'') character.  Backslash should be
     avoided outside of quoted strings because it is the escape
     character for MySQL. For an unquoted argument, the delimiter is
     read up to the first space or end of line. For a quoted argument,
     the delimiter is read up to the matching quote on the line.

     *Note `mysql': mysql. interprets instances of the delimiter string
     as a statement delimiter anywhere it occurs, except within quoted
     strings. Be careful about defining a delimiter that might occur
     within other words.  For example, if you define the delimiter as
     `X', you will be unable to use the word `INDEX' in statements.
     *Note `mysql': mysql. interprets this as `INDE' followed by the
     delimiter `X'.

     When the delimiter recognized by *Note `mysql': mysql. is set to
     something other than the default of ``;'', instances of that
     character are sent to the server without interpretation.  However,
     the server itself still interprets ``;'' as a statement delimiter
     and processes statements accordingly. This behavior on the server
     side comes into play for multiple-statement execution (see *Note
     c-api-multiple-queries::), and for parsing the body of stored
     procedures and functions, triggers, and events (see *Note
     stored-programs-defining::).

   * `edit', `\e'

     Edit the current input statement. *Note `mysql': mysql.  checks
     the values of the `EDITOR' and `VISUAL' environment variables to
     determine which editor to use. The default editor is `vi' if
     neither variable is set.

     The `edit' command works only in Unix.

   * `ego', `\G'

     Send the current statement to the server to be executed and
     display the result using vertical format.

   * `exit', `\q'

     Exit *Note `mysql': mysql.

   * `go', `\g'

     Send the current statement to the server to be executed.

   * `nopager', `\n'

     Disable output paging. See the description for `pager'.

     The `nopager' command works only in Unix.

   * `notee', `\t'

     Disable output copying to the tee file. See the description for
     `tee'.

   * `nowarning', `\w'

     Enable display of warnings after each statement.

   * `pager [COMMAND]', `\P [COMMAND]'

     Enable output paging. By using the `--pager' option when you invoke
     *Note `mysql': mysql, it is possible to browse or search query
     results in interactive mode with Unix programs such as `less',
     `more', or any other similar program. If you specify no value for
     the option, *Note `mysql': mysql. checks the value of the `PAGER'
     environment variable and sets the pager to that. Pager
     functionality works only in interactive mode.

     Output paging can be enabled interactively with the `pager'
     command and disabled with `nopager'. The command takes an optional
     argument; if given, the paging program is set to that. With no
     argument, the pager is set to the pager that was set on the
     command line, or `stdout' if no pager was specified.

     Output paging works only in Unix because it uses the `popen()'
     function, which does not exist on Windows. For Windows, the `tee'
     option can be used instead to save query output, although it is
     not as convenient as `pager' for browsing output in some
     situations.

   * `print', `\p'

     Print the current input statement without executing it.

   * `prompt [STR]', `\R [STR]'

     Reconfigure the *Note `mysql': mysql. prompt to the given string.
     The special character sequences that can be used in the prompt are
     described later in this section.

     If you specify the `prompt' command with no argument, *Note
     `mysql': mysql. resets the prompt to the default of `mysql>'.

   * `quit', `\q'

     Exit *Note `mysql': mysql.

   * `rehash', `\#'

     Rebuild the completion hash that enables database, table, and
     column name completion while you are entering statements. (See the
     description for the `--auto-rehash' option.)

   * `source FILE_NAME', `\.  FILE_NAME'

     Read the named file and executes the statements contained therein.
     On Windows, you can specify path name separators as `/' or `\\'.

   * `status', `\s'

     Provide status information about the connection and the server you
     are using. If you are running in `--safe-updates' mode, `status'
     also prints the values for the *Note `mysql': mysql. variables
     that affect your queries.

   * `system COMMAND', `\!  COMMAND'

     Execute the given command using your default command interpreter.

     The `system' command works only in Unix.

   * `tee [FILE_NAME]', `\T [FILE_NAME]'

     By using the `--tee' option when you invoke *Note `mysql': mysql,
     you can log statements and their output. All the data displayed on
     the screen is appended into a given file. This can be very useful
     for debugging purposes also. *Note `mysql': mysql. flushes results
     to the file after each statement, just before it prints its next
     prompt. Tee functionality works only in interactive mode.

     You can enable this feature interactively with the `tee' command.
     Without a parameter, the previous file is used. The `tee' file can
     be disabled with the `notee' command.  Executing `tee' again
     re-enables logging.

   * `use DB_NAME', `\u DB_NAME'

     Use DB_NAME as the default database.

   * `warnings', `\W'

     Enable display of warnings after each statement (if there are any).

Here are a few tips about the `pager' command:

   * You can use it to write to a file and the results go only to the
     file:

          mysql> pager cat > /tmp/log.txt

     You can also pass any options for the program that you want to use
     as your pager:

          mysql> pager less -n -i -S

   * In the preceding example, note the `-S' option. You may find it
     very useful for browsing wide query results. Sometimes a very wide
     result set is difficult to read on the screen. The `-S' option to
     `less' can make the result set much more readable because you can
     scroll it horizontally using the left-arrow and right-arrow keys.
     You can also use `-S' interactively within `less' to switch the
     horizontal-browse mode on and off. For more information, read the
     `less' manual page:

          shell> man less

   * The `-F' and `-X' options may be used with `less' to cause it to
     exit if output fits on one screen, which is convenient when no
     scrolling is necessary:

          mysql> pager less -n -i -S -F -X

   * You can specify very complex pager commands for handling query
     output:

          mysql> pager cat | tee /dr1/tmp/res.txt \
                    | tee /dr2/tmp/res2.txt | less -n -i -S

     In this example, the command would send query results to two files
     in two different directories on two different file systems mounted
     on `/dr1' and `/dr2', yet still display the results onscreen using
     `less'.

You can also combine the `tee' and `pager' functions. Have a `tee' file
enabled and `pager' set to `less', and you are able to browse the
results using the `less' program and still have everything appended
into a file the same time. The difference between the Unix `tee' used
with the `pager' command and the *Note `mysql': mysql. built-in `tee'
command is that the built-in `tee' works even if you do not have the
Unix `tee' available. The built-in `tee' also logs everything that is
printed on the screen, whereas the Unix `tee' used with `pager' does
not log quite that much.  Additionally, `tee' file logging can be turned
on and off interactively from within *Note `mysql': mysql.  This is
useful when you want to log some queries to a file, but not others.

The `prompt' command reconfigures the default `mysql>' prompt. The
string for defining the prompt can contain the following special
sequences.

This table describes `prompt' command options that are used to
configure the `mysql>' prompt.

Option      Description
`\c'        A counter that increments for each statement you issue
`\D'        The full current date
`\d'        The default database
`\h'        The server host
`\l'        The current delimiter
`\m'        Minutes of the current time
`\n'        A newline character
`\O'        The current month in three-letter format (Jan, Feb,
            ...)
`\o'        The current month in numeric format
`\P'        am/pm
`\p'        The current TCP/IP port or socket file
`\R'        The current time, in 24-hour military time (0-23)
`\r'        The current time, standard 12-hour time (1-12)
`\S'        Semicolon
`\s'        Seconds of the current time
`\t'        A tab character
`\U'        Your full `USER_NAME@HOST_NAME' account name
`\u'        Your user name
`\v'        The server version
`\w'        The current day of the week in three-letter format
            (Mon, Tue, ...)
`\Y'        The current year, four digits
`\y'        The current year, two digits
`\_'        A space
`\ '        A space (a space follows the backslash)
`\''        Single quote
`\"'        Double quote
`\\'        A literal ``\'' backslash character
`\X'        X, for any `X' not listed above

You can set the prompt in several ways:

   * _Use an environment variable._ You can set the `MYSQL_PS1'
     environment variable to a prompt string. For example:

          shell> export MYSQL_PS1="(\u@\h) [\d]> "

   * _Use a command-line option._ You can set the `--prompt' option on
     the command line to *Note `mysql': mysql. For example:

          shell> mysql --prompt="(\u@\h) [\d]> "
          (user@host) [database]>

   * _Use an option file._ You can set the `prompt' option in the
     `[mysql]' group of any MySQL option file, such as `/etc/my.cnf' or
     the `.my.cnf' file in your home directory.  For example:

          [mysql]
          prompt=(\\u@\\h) [\\d]>\\_

     In this example, note that the backslashes are doubled. If you set
     the prompt using the `prompt' option in an option file, it is
     advisable to double the backslashes when using the special prompt
     options. There is some overlap in the set of permissible prompt
     options and the set of special escape sequences that are
     recognized in option files. (The rules for escape sequences in
     option files are listed in *Note option-files::.) The overlap may
     cause you problems if you use single backslashes. For example,
     `\s' is interpreted as a space rather than as the current seconds
     value. The following example shows how to define a prompt within
     an option file to include the current time in `HH:MM:SS>' format:

          [mysql]
          prompt="\\r:\\m:\\s> "

   * _Set the prompt interactively._ You can change your prompt
     interactively by using the `prompt' (or `\R') command. For example:

          mysql> prompt (\u@\h) [\d]>\_
          PROMPT set to '(\u@\h) [\d]>\_'
          (USER@HOST) [DATABASE]>
          (USER@HOST) [DATABASE]> prompt
          Returning to default PROMPT of mysql>
          mysql>


File: manual.info,  Node: mysql-logging,  Next: mysql-server-side-help,  Prev: mysql-commands,  Up: mysql

4.5.1.3 `mysql' Logging
.......................

On Unix, the *Note `mysql': mysql. client logs statements executed
interactively to a history file. By default, this file is named
`.mysql_history' in your home directory. To specify a different file,
set the value of the `MYSQL_HISTFILE' environment variable.

* How Logging Occurs *

Statement logging occurs as follows:

   * Statements are logged only when executed interactively.
     Statements are noninteractive, for example, when read from a file
     or a pipe. It is also possible to suppress statement logging by
     using the `--batch' or `--execute' option.

   * *Note `mysql': mysql. logs each nonempty statement line
     individually.

   * If a statement spans multiple lines (not including the terminating
     delimiter), *Note `mysql': mysql.  concatenates the lines to form
     the complete statement, maps newlines to spaces, and logs the
     result, plus a delimiter.

Consequently, an input statement that spans multiple lines can be
logged twice. Consider this input:

     mysql> SELECT
         -> 'Today is'
         -> ,
         -> CONCAT()
         -> ;

In this case, *Note `mysql': mysql. logs the `SELECT', `'Today is'',
`,', `CONCAT()', and `;' lines as it reads them. It also logs the
complete statement, after mapping `SELECT\n'Today is'\n,\nCURDATE()' to
`SELECT 'Today is' , CURDATE()', plus a delimiter. Thus, these lines
appear in logged output:

     SELECT
     'Today is'
     ,
     CURDATE()
     ;
     SELECT 'Today is' , CURDATE();

* Controlling the History File *

The `.mysql_history' file should be protected with a restrictive access
mode because sensitive information might be written to it, such as the
text of SQL statements that contain passwords. See *Note
password-security-user::.

If you do not want to maintain a history file, first remove
`.mysql_history' if it exists. Then use either of the following
techniques to prevent it from being created again:

   * Set the `MYSQL_HISTFILE' environment variable to `/dev/null'. To
     cause this setting to take effect each time you log in, put it in
     one of your shell's startup files.

   * Create `.mysql_history' as a symbolic link to `/dev/null'; this
     need be done only once:

          shell> ln -s /dev/null $HOME/.mysql_history


File: manual.info,  Node: mysql-server-side-help,  Next: mysql-batch-commands,  Prev: mysql-logging,  Up: mysql

4.5.1.4 `mysql' Server-Side Help
................................

     mysql> help SEARCH_STRING

If you provide an argument to the `help' command, *Note `mysql': mysql.
uses it as a search string to access server-side help from the contents
of the MySQL Reference Manual. The proper operation of this command
requires that the help tables in the `mysql' database be initialized
with help topic information (see *Note server-side-help-support::).

If there is no match for the search string, the search fails:

     mysql> help me

     Nothing found
     Please try to run 'help contents' for a list of all accessible topics

Use *Note `help contents': help. to see a list of the help categories:

     mysql> help contents
     You asked for help about help category: "Contents"
     For more information, type 'help <item>', where <item> is one of the
     following categories:
        Account Management
        Administration
        Data Definition
        Data Manipulation
        Data Types
        Functions
        Functions and Modifiers for Use with GROUP BY
        Geographic Features
        Language Structure
        Plugins
        Storage Engines
        Stored Routines
        Table Maintenance
        Transactions
        Triggers

If the search string matches multiple items, *Note `mysql': mysql.
shows a list of matching topics:

     mysql> help logs
     Many help items for your request exist.
     To make a more specific request, please type 'help <item>',
     where <item> is one of the following topics:
        SHOW
        SHOW BINARY LOGS
        SHOW ENGINE
        SHOW LOGS

Use a topic as the search string to see the help entry for that topic:

     mysql> help show binary logs
     Name: 'SHOW BINARY LOGS'
     Description:
     Syntax:
     SHOW BINARY LOGS
     SHOW MASTER LOGS

     Lists the binary log files on the server. This statement is used as
     part of the procedure described in [purge-binary-logs], that shows how
     to determine which logs can be purged.

     mysql> SHOW BINARY LOGS;
     +---------------+-----------+
     | Log_name      | File_size |
     +---------------+-----------+
     | binlog.000015 |    724935 |
     | binlog.000016 |    733481 |
     +---------------+-----------+

The search string can contain the the wildcard characters ``%'' and
``_''. These have the same meaning as for pattern-matching operations
performed with the `LIKE' operator. For example, `HELP rep%' returns a
list of topics that begin with `rep':

     mysql> HELP rep%
     Many help items for your request exist.
     To make a more specific request, please type 'help <item>',
     where <item> is one of the following
     topics:
        REPAIR TABLE
        REPEAT FUNCTION
        REPEAT LOOP
        REPLACE
        REPLACE FUNCTION


File: manual.info,  Node: mysql-batch-commands,  Next: mysql-tips,  Prev: mysql-server-side-help,  Up: mysql

4.5.1.5 Executing SQL Statements from a Text File
.................................................

The *Note `mysql': mysql. client typically is used interactively, like
this:

     shell> mysql DB_NAME

However, it is also possible to put your SQL statements in a file and
then tell *Note `mysql': mysql. to read its input from that file. To do
so, create a text file TEXT_FILE that contains the statements you wish
to execute. Then invoke *Note `mysql': mysql. as shown here:

     shell> mysql DB_NAME < TEXT_FILE

If you place a `USE DB_NAME' statement as the first statement in the
file, it is unnecessary to specify the database name on the command
line:

     shell> mysql < text_file

If you are already running *Note `mysql': mysql, you can execute an SQL
script file using the `source' command or `\.' command:

     mysql> source FILE_NAME
     mysql> \. FILE_NAME

Sometimes you may want your script to display progress information to
the user. For this you can insert statements like this:

     SELECT '<info_to_display>' AS ' ';

The statement shown outputs `<info_to_display>'.

You can also invoke *Note `mysql': mysql. with the `--verbose' option,
which causes each statement to be displayed before the result that it
produces.

*Note `mysql': mysql. ignores Unicode byte order mark (BOM) characters
at the beginning of input files. Previously, it read them and sent them
to the server, resulting in a syntax error.  Presence of a BOM does not
cause *Note `mysql': mysql. to change its default character set. To do
that, invoke *Note `mysql': mysql. with an option such as
`--default-character-set=utf8'.

For more information about batch mode, see *Note batch-mode::.


File: manual.info,  Node: mysql-tips,  Prev: mysql-batch-commands,  Up: mysql

4.5.1.6 `mysql' Tips
....................

* Menu:

* mysql-input-editing::          Input-Line Editing
* vertical-query-results::       Displaying Query Results Vertically
* safe-updates::                 Using the `--safe-updates' Option
* mysql-reconnect::              Disabling `mysql' Auto-Reconnect

This section describes some techniques that can help you use *Note
`mysql': mysql. more effectively.


File: manual.info,  Node: mysql-input-editing,  Next: vertical-query-results,  Prev: mysql-tips,  Up: mysql-tips

4.5.1.7 Input-Line Editing
..........................

*Note `mysql': mysql. supports input-line editing, which enables you to
modify the current input line in place or recall previous input lines.
For example, the `left-arrow' and `right-arrow' keys move horizontally
within the current input line, and the `up-arror' and `down-arrow' keys
move up and down through the set of previously entered lines.
`Backspace' deletes the character before the cursor and typing new
characters enters them at the cursor position. To enter the line, press
`Enter'.

On Windows, the editing key sequences are the same as supported for
command editing in console windows. On Unix, the key sequences depend
on the input library used to build *Note `mysql': mysql. (for example,
the `libedit' or `readline' library).

Documentation for the `libedit' and `readline' libraries is available
online. To change the set of key sequences permitted by a given input
library, define key bindings in the library startup file. This is a
file in your home directory: `.editrc' for `libedit' and `.inputrc' for
`readline'.

For example, in `libedit', `Control+W' deletes everything before the
current cursor position and `Control+U' deletes the entire line. In
`readline', `Control+W' deletes the word before the cursor and
`Control+U' deletes everything before the current cursor position. If
*Note `mysql': mysql. was built using `libedit', a user who prefers the
`readline' behavior for these two keys can put the following lines in
the `.editrc' file (creating the file if necessary):

     bind "^W" ed-delete-prev-word
     bind "^U" vi-kill-line-prev

To see the current set of key bindings, temporarily put a line that
says only `bind' at the end of `.editrc'. *Note `mysql': mysql. will
show the bindings when it starts.


File: manual.info,  Node: vertical-query-results,  Next: safe-updates,  Prev: mysql-input-editing,  Up: mysql-tips

4.5.1.8 Displaying Query Results Vertically
...........................................

Some query results are much more readable when displayed vertically,
instead of in the usual horizontal table format.  Queries can be
displayed vertically by terminating the query with \G instead of a
semicolon. For example, longer text values that include newlines often
are much easier to read with vertical output:

     mysql> SELECT * FROM mails WHERE LENGTH(txt) < 300 LIMIT 300,1\G
     *************************** 1. row ***************************
       msg_nro: 3068
          date: 2000-03-01 23:29:50
     time_zone: +0200
     mail_from: Monty
         reply: monty@no.spam.com
       mail_to: "Thimble Smith" <tim@no.spam.com>
           sbj: UTF-8
           txt: >>>>> "Thimble" == Thimble Smith writes:

     Thimble> Hi.  I think this is a good idea.  Is anyone familiar
     Thimble> with UTF-8 or Unicode? Otherwise, I'll put this on my
     Thimble> TODO list and see what happens.

     Yes, please do that.

     Regards,
     Monty
          file: inbox-jani-1
          hash: 190402944
     1 row in set (0.09 sec)


File: manual.info,  Node: safe-updates,  Next: mysql-reconnect,  Prev: vertical-query-results,  Up: mysql-tips

4.5.1.9 Using the `--safe-updates' Option
.........................................

For beginners, a useful startup option is `--safe-updates' (or
`--i-am-a-dummy', which has the same effect). It is helpful for cases
when you might have issued a `DELETE FROM TBL_NAME' statement but
forgotten the `WHERE' clause. Normally, such a statement deletes all
rows from the table. With `--safe-updates', you can delete rows only by
specifying the key values that identify them.  This helps prevent
accidents.

When you use the `--safe-updates' option, *Note `mysql': mysql. issues
the following statement when it connects to the MySQL server:

     SET sql_safe_updates=1, sql_select_limit=1000, sql_max_join_size=1000000;

See *Note server-system-variables::.

The *Note `SET': set-statement.  statement has the following effects:

   * You are not permitted to execute an *Note `UPDATE': update. or
     *Note `DELETE': delete. statement unless you specify a key
     constraint in the `WHERE' clause or provide a `LIMIT' clause (or
     both). For example:

          UPDATE TBL_NAME SET NOT_KEY_COLUMN=VAL WHERE KEY_COLUMN=VAL;

          UPDATE TBL_NAME SET NOT_KEY_COLUMN=VAL LIMIT 1;

   * The server limits all large *Note `SELECT': select. results to
     1,000 rows unless the statement includes a `LIMIT' clause.

   * The server aborts multiple-table *Note `SELECT': select.
     statements that probably need to examine more than 1,000,000 row
     combinations.

To specify limits different from 1,000 and 1,000,000, you can override
the defaults by using the `--select_limit' and `--max_join_size'
options:

     shell> mysql --safe-updates --select_limit=500 --max_join_size=10000


File: manual.info,  Node: mysql-reconnect,  Prev: safe-updates,  Up: mysql-tips

4.5.1.10 Disabling `mysql' Auto-Reconnect
.........................................

If the *Note `mysql': mysql. client loses its connection to the server
while sending a statement, it immediately and automatically tries to
reconnect once to the server and send the statement again. However,
even if *Note `mysql': mysql.  succeeds in reconnecting, your first
connection has ended and all your previous session objects and settings
are lost: temporary tables, the autocommit mode, and user-defined and
session variables. Also, any current transaction rolls back.  This
behavior may be dangerous for you, as in the following example where
the server was shut down and restarted between the first and second
statements without you knowing it:

     mysql> SET @a=1;
     Query OK, 0 rows affected (0.05 sec)

     mysql> INSERT INTO t VALUES(@a);
     ERROR 2006: MySQL server has gone away
     No connection. Trying to reconnect...
     Connection id:    1
     Current database: test

     Query OK, 1 row affected (1.30 sec)

     mysql> SELECT * FROM t;
     +------+
     | a    |
     +------+
     | NULL |
     +------+
     1 row in set (0.05 sec)

The `@a' user variable has been lost with the connection, and after the
reconnection it is undefined. If it is important to have *Note `mysql':
mysql. terminate with an error if the connection has been lost, you can
start the *Note `mysql': mysql. client with the `--skip-reconnect'
option.

For more information about auto-reconnect and its effect on state
information when a reconnection occurs, see *Note auto-reconnect::.


File: manual.info,  Node: mysqladmin,  Next: mysqlcheck,  Prev: mysql,  Up: programs-client

4.5.2 `mysqladmin' -- Client for Administering a MySQL Server
-------------------------------------------------------------

*Note `mysqladmin': mysqladmin. is a client for performing
administrative operations. You can use it to check the server's
configuration and current status, to create and drop databases, and
more.

Invoke *Note `mysqladmin': mysqladmin. like this:

     shell> mysqladmin [OPTIONS] COMMAND [COMMAND-ARG] [COMMAND [COMMAND-ARG]] ...

*Note `mysqladmin': mysqladmin. supports the following commands.  Some
of the commands take an argument following the command name.

   *  `create DB_NAME'

     Create a new database named DB_NAME.

   *  `debug'

     Tell the server to write debug information to the error log.
     Format and content of this information is subject to change.

     This includes information about the Event Scheduler. See *Note
     events-status-info::.

   *  `drop DB_NAME'

     Delete the database named DB_NAME and all its tables.

   *  `extended-status'

     Display the server status variables and their values.

   *  `flush-hosts'

     Flush all information in the host cache.

   *  `flush-logs'

     Flush all logs.

   *  `flush-privileges'

     Reload the grant tables (same as `reload').

   *  `flush-status'

     Clear status variables.

   *  `flush-tables'

     Flush all tables.

   *  `flush-threads'

     Flush the thread cache.

   *  `kill ID,ID,...'

     Kill server threads. If multiple thread ID values are given, there
     must be no spaces in the list.

   *  `old-password NEW-PASSWORD'

     This is like the `password' command but stores the password using
     the old (pre-4.1) password-hashing format. (See *Note
     password-hashing::.)

   *  `password NEW-PASSWORD'

     Set a new password. This changes the password to NEW-PASSWORD for
     the account that you use with *Note `mysqladmin': mysqladmin. for
     connecting to the server. Thus, the next time you invoke *Note
     `mysqladmin': mysqladmin. (or any other client program) using the
     same account, you will need to specify the new password.

     If the NEW-PASSWORD value contains spaces or other characters that
     are special to your command interpreter, you need to enclose it
     within quotation marks. On Windows, be sure to use double
     quotation marks rather than single quotation marks; single
     quotation marks are not stripped from the password, but rather are
     interpreted as part of the password. For example:

          shell> mysqladmin password "my new password"

     As of MySQL 5.5.3, the new password can be omitted following the
     `password' command. In this case, *Note `mysqladmin': mysqladmin.
     prompts for the password value, which enables you to avoid
     specifying the password on the command line. Omitting the password
     value should be done only if `password' is the final command on
     the *Note `mysqladmin': mysqladmin. command line. Otherwise, the
     next argument is taken as the password.

     *Caution*:

     Do not use this command used if the server was started with the
     `--skip-grant-tables' option.  No password change will be applied.
     This is true even if you precede the `password' command with
     `flush-privileges' on the same command line to re-enable the grant
     tables because the flush operation occurs after you connect.
     However, you can use *Note `mysqladmin flush-privileges':
     mysqladmin. to re-enable the grant table and then use a separate
     *Note `mysqladmin password': mysqladmin. command to change the
     password.

   *  `ping'

     Check whether the server is available. The return status from
     *Note `mysqladmin': mysqladmin. is 0 if the server is running, 1
     if it is not. This is 0 even in case of an error such as `Access
     denied', because this means that the server is running but refused
     the connection, which is different from the server not running.

   *  `processlist'

     Show a list of active server threads. This is like the output of
     the *Note `SHOW PROCESSLIST': show-processlist. statement. If the
     `--verbose' option is given, the output is like that of *Note
     `SHOW FULL PROCESSLIST': show-processlist. (See *Note
     show-processlist::.)

   *  `reload'

     Reload the grant tables.

   *  `refresh'

     Flush all tables and close and open log files.

   *  `shutdown'

     Stop the server.

   *  `start-slave'

     Start replication on a slave server.

   *  `status'

     Display a short server status message.

   *  `stop-slave'

     Stop replication on a slave server.

   *  `variables'

     Display the server system variables and their values.

   *  `version'

     Display version information from the server.

All commands can be shortened to any unique prefix. For example:

     shell> mysqladmin proc stat
     +----+-------+-----------+----+---------+------+-------+------------------+
     | Id | User  | Host      | db | Command | Time | State | Info             |
     +----+-------+-----------+----+---------+------+-------+------------------+
     | 51 | monty | localhost |    | Query   | 0    |       | show processlist |
     +----+-------+-----------+----+---------+------+-------+------------------+
     Uptime: 1473624  Threads: 1  Questions: 39487
     Slow queries: 0  Opens: 541  Flush tables: 1
     Open tables: 19  Queries per second avg: 0.0268

The *Note `mysqladmin status': mysqladmin. command result displays the
following values:

   * `Uptime'

     The number of seconds the MySQL server has been running.

   * `Threads'

     The number of active threads (clients).

   * `Questions'

     The number of questions (queries) from clients since the server
     was started.

   * `Slow queries'

     The number of queries that have taken more than `long_query_time'
     seconds.  See *Note slow-query-log::.

   * `Opens'

     The number of tables the server has opened.

   * `Flush tables'

     The number of `flush-*', `refresh', and `reload' commands the
     server has executed.

   * `Open tables'

     The number of tables that currently are open.

   * `Memory in use'

     The amount of memory allocated directly by *Note `mysqld': mysqld.
     This value is displayed only when MySQL has been compiled with
     `safemalloc', which is available only before MySQL 5.5.6.

   * `Maximum memory used'

     The maximum amount of memory allocated directly by *Note `mysqld':
     mysqld. This value is displayed only when MySQL has been compiled
     with `safemalloc', which is available only before MySQL 5.5.6.

If you execute *Note `mysqladmin shutdown': mysqladmin. when connecting
to a local server using a Unix socket file, *Note `mysqladmin':
mysqladmin. waits until the server's process ID file has been removed,
to ensure that the server has stopped properly.

*Note `mysqladmin': mysqladmin. supports the following options, which
can be specified on the command line or in the `[mysqladmin]' and
`[client]' groups of an option file. *Note `mysqladmin': mysqladmin.
also supports the options for processing option files described at
*Note option-file-options::.

*`mysqladmin' Options*

Format      Option File Description                   Introduced
-compress   compress    Compress all information      
                        sent between the client and   
                        the server                    
-connect_timeout=secondsconnect_timeoutThe number of seconds before  
                        connection timeout            
-count=#    count       The number of iterations to   
                        make for repeated command     
                        execution                     
-debug[=debug_options]debug       Write a debugging log         
-debug-checkdebug-check Print debugging information   
                        when the program exits        
-debug-info debug-info  Print debugging information,  
                        memory and CPU statistics     
                        when the program exits        
-default-auth=plugindefault-auth=pluginThe authentication plugin to  5.5.9
                        use                           
-default-character-set=charset_namedefault-character-setUse charset_name as the       
                        default character set         
-enable-cleartext-pluginenable-cleartext-pluginEnable cleartext              5.5.27
                        authentication plugin         
-force      force       Continue even if an SQL       
                        error occurs                  
-help                   Display help message and exit 
-host=host_namehost        Connect to the MySQL server   
                        on the given host             
-no-beep    no-beep     Do not beep when errors occur 
-password[=password]password    The password to use when      
                        connecting to the server      
-pipe                   On Windows, connect to        
                        server using a named pipe     
-plugin-dir=pathplugin-dir=pathThe directory where plugins   5.5.9
                        are located                   
-port=port_numport        The TCP/IP port number to     
                        use for the connection        
-protocol=typeprotocol    The connection protocol to    
                        use                           
-relative   relative    Show the difference between   
                        the current and previous      
                        values when used with the     
                        -sleep option                 
-shutdown_timeout=secondsshutdown_timeoutThe maximum number of         
                        seconds to wait for server    
                        shutdown                      
-silent     silent      Silent mode                   
-sleep=delaysleep       Execute commands repeatedly,  
                        sleeping for delay seconds    
                        in between                    
-socket=pathsocket      For connections to localhost  
-ssl-ca=file_namessl-ca      The path to a file that       
                        contains a list of trusted    
                        SSL CAs                       
-ssl-capath=dir_namessl-capath  The path to a directory that  
                        contains trusted SSL CA       
                        certificates in PEM format    
-ssl-cert=file_namessl-cert    The name of the SSL           
                        certificate file to use for   
                        establishing a secure         
                        connection                    
-ssl-cipher=cipher_listssl-cipher  A list of allowable ciphers   
                        to use for SSL encryption     
-ssl-key=file_namessl-key     The name of the SSL key file  
                        to use for establishing a     
                        secure connection             
-ssl-verify-server-certssl-verify-server-certThe server's Common Name      
                        value in its certificate is   
                        verified against the host     
                        name used when connecting to  
                        the server                    
-user=user_name,user        MySQL user name to use when   
                        connecting to server          
-verbose                Verbose mode                  
-version                Display version information   
                        and exit                      
-vertical   vertical    Print query output rows       
                        vertically (one line per      
                        column value)                 
-wait       wait        If the connection cannot be   
                        established, wait and retry   
                        instead of aborting           

   *  `--help', `-?'

     Display a help message and exit.

   *  `--bind-address=IP_ADDRESS'

     On a computer having multiple network interfaces, this option can
     be used to select which interface is employed when connecting to
     the MySQL server.

     This option is supported only in the version of *Note
     `mysqladmin': mysqladmin. that is supplied with MySQL Cluster. It
     is not available in standard MySQL Server 5.5 releases.

   *  `--character-sets-dir=PATH'

     The directory where character sets are installed. See *Note
     charset-configuration::.

   *  `--compress', `-C'

     Compress all information sent between the client and the server if
     both support compression.

   *  `--count=N', `-c N'

     The number of iterations to make for repeated command execution if
     the `--sleep' option is given.

   *  `--debug[=DEBUG_OPTIONS]', `-# [DEBUG_OPTIONS]'

     Write a debugging log. A typical DEBUG_OPTIONS string is
     `'d:t:o,FILE_NAME''.  The default is
     `'d:t:o,/tmp/mysqladmin.trace''.

   *  `--debug-check'

     Print some debugging information when the program exits.

   *  `--debug-info'

     Print debugging information and memory and CPU usage statistics
     when the program exits.

   *  `--default-auth=PLUGIN'

     The client-side authentication plugin to use. See *Note
     pluggable-authentication::.

     This option was added in MySQL 5.5.9.

   *  `--default-character-set=CHARSET_NAME'

     Use CHARSET_NAME as the default character set. See *Note
     charset-configuration::.

   *  `--enable-cleartext-plugin'

     Enable the `mysql_clear_password' cleartext authentication plugin.
     (See *Note cleartext-authentication-plugin::.) This option was
     added in MySQL 5.5.27.

   *  `--force', `-f'

     Do not ask for confirmation for the `drop DB_NAME' command. With
     multiple commands, continue even if an error occurs.

   *  `--host=HOST_NAME', `-h HOST_NAME'

     Connect to the MySQL server on the given host.

   *  `--no-beep', `-b'

     Suppress the warning beep that is emitted by default for errors
     such as a failure to connect to the server.

   *  `--password[=PASSWORD]', `-p[PASSWORD]'

     The password to use when connecting to the server. If you use the
     short option form (`-p'), you _cannot_ have a space between the
     option and the password. If you omit the PASSWORD value following
     the `--password' or `-p' option on the command line, *Note
     `mysqladmin': mysqladmin. prompts for one.

     Specifying a password on the command line should be considered
     insecure. See *Note password-security-user::. You can use an
     option file to avoid giving the password on the command line.

   *  `--pipe', `-W'

     On Windows, connect to the server using a named pipe. This option
     applies only if the server supports named-pipe connections.

   *  `--plugin-dir=PATH'

     The directory in which to look for plugins. It may be necessary to
     specify this option if the `--default-auth' option is used to
     specify an authentication plugin but *Note `mysqladmin':
     mysqladmin. does not find it. See *Note pluggable-authentication::.

     This option was added in MySQL 5.5.9.

   *  `--port=PORT_NUM', `-P PORT_NUM'

     The TCP/IP port number to use for the connection.

   *  `--protocol={TCP|SOCKET|PIPE|MEMORY}'

     The connection protocol to use for connecting to the server.  It
     is useful when the other connection parameters normally would
     cause a protocol to be used other than the one you want. For
     details on the permissible values, see *Note connecting::.

   *  `--relative', `-r'

     Show the difference between the current and previous values when
     used with the `--sleep' option. This option works only with the
     `extended-status' command.

   *  `--silent', `-s'

     Exit silently if a connection to the server cannot be established.

   *  `--sleep=DELAY', `-i DELAY'

     Execute commands repeatedly, sleeping for DELAY seconds in
     between. The `--count' option determines the number of iterations.
     If `--count' is not given, *Note `mysqladmin': mysqladmin.
     executes commands indefinitely until interrupted.

   *  `--socket=PATH', `-S PATH'

     For connections to `localhost', the Unix socket file to use, or,
     on Windows, the name of the named pipe to use.

   *  `--ssl*'

     Options that begin with `--ssl' specify whether to connect to the
     server using SSL and indicate where to find SSL keys and
     certificates. See *Note ssl-options::.

   *  `--user=USER_NAME', `-u USER_NAME'

     The MySQL user name to use when connecting to the server.

   *  `--verbose', `-v'

     Verbose mode. Print more information about what the program does.

   *  `--version', `-V'

     Display version information and exit.

   *  `--vertical', `-E'

     Print output vertically. This is similar to `--relative', but
     prints output vertically.

   *  `--wait[=COUNT]', `-w[COUNT]'

     If the connection cannot be established, wait and retry instead of
     aborting. If a COUNT value is given, it indicates the number of
     times to retry.  The default is one time.

You can also set the following variables by using `--VAR_NAME=VALUE'
The `--set-variable' format is deprecated and was removed in MySQL
5.5.3. syntax:

   *  `connect_timeout'

     The maximum number of seconds before connection timeout. The
     default value is 43200 (12 hours).

   *  `shutdown_timeout'

     The maximum number of seconds to wait for server shutdown.  The
     default value is 3600 (1 hour).


File: manual.info,  Node: mysqlcheck,  Next: mysqldump,  Prev: mysqladmin,  Up: programs-client

4.5.3 `mysqlcheck' -- A Table Maintenance Program
-------------------------------------------------

The *Note `mysqlcheck': mysqlcheck. client performs table maintenance:
It checks, repairs, optimizes, or analyzes tables.

Each table is locked and therefore unavailable to other sessions while
it is being processed, although for check operations, the table is
locked with a `READ' lock only (see *Note lock-tables::, for more
information about `READ' and `WRITE' locks).  Table maintenance
operations can be time-consuming, particularly for large tables. If you
use the `--databases' or `--all-databases' option to process all tables
in one or more databases, an invocation of *Note `mysqlcheck':
mysqlcheck. might take a long time. (This is also true for *Note
`mysql_upgrade': mysql-upgrade. because that program invokes *Note
`mysqlcheck': mysqlcheck. to check all tables and repair them if
necessary.)

*Note `mysqlcheck': mysqlcheck. is similar in function to *Note
`myisamchk': myisamchk, but works differently. The main operational
difference is that *Note `mysqlcheck': mysqlcheck.  must be used when
the *Note `mysqld': mysqld. server is running, whereas *Note
`myisamchk': myisamchk. should be used when it is not. The benefit of
using *Note `mysqlcheck': mysqlcheck. is that you do not have to stop
the server to perform table maintenance.

*Note `mysqlcheck': mysqlcheck. uses the SQL statements *Note `CHECK
TABLE': check-table, *Note `REPAIR TABLE': repair-table, *Note `ANALYZE
TABLE': analyze-table, and *Note `OPTIMIZE TABLE': optimize-table. in a
convenient way for the user. It determines which statements to use for
the operation you want to perform, and then sends the statements to the
server to be executed. For details about which storage engines each
statement works with, see the descriptions for those statements in
*Note table-maintenance-sql::.

The `MyISAM' storage engine supports all four maintenance operations,
so *Note `mysqlcheck': mysqlcheck. can be used to perform any of them
on `MyISAM' tables.  Other storage engines do not necessarily support
all operations.  In such cases, an error message is displayed. For
example, if `test.t' is a `MEMORY' table, an attempt to check it
produces this result:

     shell> mysqlcheck test t
     test.t
     note     : The storage engine for the table doesn't support check

If *Note `mysqlcheck': mysqlcheck. is unable to repair a table, see
*Note rebuilding-tables:: for manual table repair strategies. This will
be the case, for example, for `InnoDB' tables, which can be checked with
*Note `CHECK TABLE': check-table, but not repaired with *Note `REPAIR
TABLE': repair-table.

*Caution*:

It is best to make a backup of a table before performing a table repair
operation; under some circumstances the operation might cause data
loss. Possible causes include but are not limited to file system errors.

There are three general ways to invoke *Note `mysqlcheck': mysqlcheck.:

     shell> mysqlcheck [OPTIONS] DB_NAME [TBL_NAME ...]
     shell> mysqlcheck [OPTIONS] --databases DB_NAME ...
     shell> mysqlcheck [OPTIONS] --all-databases

If you do not name any tables following DB_NAME or if you use the
`--databases' or `--all-databases' option, entire databases are checked.

*Note `mysqlcheck': mysqlcheck. has a special feature compared to other
client programs. The default behavior of checking tables (`--check')
can be changed by renaming the binary. If you want to have a tool that
repairs tables by default, you should just make a copy of *Note
`mysqlcheck': mysqlcheck. named `mysqlrepair', or make a symbolic link
to *Note `mysqlcheck': mysqlcheck. named `mysqlrepair'. If you invoke
`mysqlrepair', it repairs tables.

The names shown in the following table can be used to change *Note
`mysqlcheck': mysqlcheck. default behavior.

This table lists names that can be used to change *Note `mysqlcheck':
mysqlcheck. default behavior.

Command            Meaning
`mysqlrepair'      The default option is `--repair'
`mysqlanalyze'     The default option is `--analyze'
`mysqloptimize'    The default option is `--optimize'

*Note `mysqlcheck': mysqlcheck. supports the following options, which
can be specified on the command line or in the `[mysqlcheck]' and
`[client]' groups of an option file. *Note `mysqlcheck': mysqlcheck.
also supports the options for processing option files described at
*Note option-file-options::.

*`mysqlcheck' Options*

Format      Option File Description                   Introduced
-all-databasesall-databasesCheck all tables in all       
                        databases                     
-all-in-1   all-in-1    Execute a single statement    
                        for each database that names  
                        all the tables from that      
                        database                      
-analyze    analyze     Analyze the tables            
-auto-repairauto-repair If a checked table is         
                        corrupted, automatically fix  
                        it                            
-character-sets-dir=pathcharacter-sets-dirThe directory where           
                        character sets are installed  
-check      check       Check the tables for errors   
-check-only-changedcheck-only-changedCheck only tables that have   
                        changed since the last check  
-check-upgradecheck-upgradeInvoke CHECK TABLE with the   
                        FOR UPGRADE option            
-compress   compress    Compress all information      
                        sent between the client and   
                        the server                    
-databases  databases   Process all tables in the     
                        named databases               
-debug[=debug_options]debug       Write a debugging log         
-debug-checkdebug-check Print debugging information   
                        when the program exits        
-debug-info debug-info  Print debugging information,  
                        memory and CPU statistics     
                        when the program exits        
-default-auth=plugindefault-auth=pluginThe authentication plugin to  5.5.10
                        use                           
-default-character-set=charset_namedefault-character-setUse charset_name as the       
                        default character set         
-extended   extended    Check and repair tables       
-fast       fast        Check only tables that have   
                        not been closed properly      
-fix-db-namesfix-db-namesConvert database names to     
                        5.1 format                    
-fix-table-namesfix-table-namesConvert table names to 5.1    
                        format                        
-force      force       Continue even if an SQL       
                        error occurs                  
-help                   Display help message and exit 
-host=host_namehost        Connect to the MySQL server   
                        on the given host             
-medium-checkmedium-checkDo a check that is faster     
                        than an -extended operation   
-optimize   optimize    Optimize the tables           
-password[=password]password    The password to use when      
                        connecting to the server      
-pipe                   On Windows, connect to        
                        server using a named pipe     
-plugin-dir=pathplugin-dir=pathThe directory where plugins   5.5.10
                        are located                   
-port=port_numport        The TCP/IP port number to     
                        use for the connection        
-protocol=typeprotocol    The connection protocol to    
                        use                           
-quick      quick       The fastest method of         
                        checking                      
-repair     repair      Perform a repair that can     
                        fix almost anything except    
                        unique keys that are not      
                        unique                        
-silent     silent      Silent mode                   
-socket=pathsocket      For connections to localhost  
-ssl-ca=file_namessl-ca      The path to a file that       
                        contains a list of trusted    
                        SSL CAs                       
-ssl-capath=dir_namessl-capath  The path to a directory that  
                        contains trusted SSL CA       
                        certificates in PEM format    
-ssl-cert=file_namessl-cert    The name of the SSL           
                        certificate file to use for   
                        establishing a secure         
                        connection                    
-ssl-cipher=cipher_listssl-cipher  A list of allowable ciphers   
                        to use for SSL encryption     
-ssl-key=file_namessl-key     The name of the SSL key file  
                        to use for establishing a     
                        secure connection             
-ssl-verify-server-certssl-verify-server-certThe server's Common Name      
                        value in its certificate is   
                        verified against the host     
                        name used when connecting to  
                        the server                    
-tables     tables      Overrides the -databases or   
                        -B option                     
-use-frm    use-frm     For repair operations on      
                        MyISAM tables                 
-user=user_name,user        MySQL user name to use when   
                        connecting to server          
-verbose                Verbose mode                  
-version                Display version information   
                        and exit                      
-write-binlogwrite-binlogLog ANALYZE, OPTIMIZE,        
                        REPAIR statements to binary   
                        log. -skip-write-binlog adds  
                        NO_WRITE_TO_BINLOG to these   
                        statements.                   

   *  `--help', `-?'

     Display a help message and exit.

   *  `--all-databases', `-A'

     Check all tables in all databases. This is the same as using the
     `--databases' option and naming all the databases on the command
     line.

   *  `--all-in-1', `-1'

     Instead of issuing a statement for each table, execute a single
     statement for each database that names all the tables from that
     database to be processed.

   *  `--analyze', `-a'

     Analyze the tables.

   *  `--auto-repair'

     If a checked table is corrupted, automatically fix it. Any
     necessary repairs are done after all tables have been checked.

   *  `--bind-address=IP_ADDRESS'

     On a computer having multiple network interfaces, this option can
     be used to select which interface is employed when connecting to
     the MySQL server.

     This option is supported only in the version of *Note
     `mysqlcheck': mysqlcheck. that is supplied with MySQL Cluster. It
     is not available in standard MySQL Server 5.5 releases.

   *  `--character-sets-dir=PATH'

     The directory where character sets are installed. See *Note
     charset-configuration::.

   *  `--check', `-c'

     Check the tables for errors. This is the default operation.

   *  `--check-only-changed', `-C'

     Check only tables that have changed since the last check or that
     have not been closed properly.

   *  `--check-upgrade', `-g'

     Invoke *Note `CHECK TABLE': check-table. with the `FOR UPGRADE'
     option to check tables for incompatibilities with the current
     version of the server.  This option automatically enables the
     `--fix-db-names' and `--fix-table-names' options.

   *  `--compress'

     Compress all information sent between the client and the server if
     both support compression.

   *  `--databases', `-B'

     Process all tables in the named databases. Normally, *Note
     `mysqlcheck': mysqlcheck. treats the first name argument on the
     command line as a database name and following names as table
     names. With this option, it treats all name arguments as database
     names.

   *  `--debug[=DEBUG_OPTIONS]', `-# [DEBUG_OPTIONS]'

     Write a debugging log. A typical DEBUG_OPTIONS string is
     `'d:t:o,FILE_NAME''.  The default is `'d:t:o''.

   *  `--debug-check'

     Print some debugging information when the program exits.

   *  `--debug-info'

     Print debugging information and memory and CPU usage statistics
     when the program exits.

   *  `--default-character-set=CHARSET_NAME'

     Use CHARSET_NAME as the default character set. See *Note
     charset-configuration::.

   *  `--extended', `-e'

     If you are using this option to check tables, it ensures that they
     are 100% consistent but takes a long time.

     If you are using this option to repair tables, it runs an extended
     repair that may not only take a long time to execute, but may
     produce a lot of garbage rows also!

   *  `--default-auth=PLUGIN'

     The client-side authentication plugin to use. See *Note
     pluggable-authentication::.

     This option was added in MySQL 5.5.10.

   *  `--fast', `-F'

     Check only tables that have not been closed properly.

   *  `--fix-db-names'

     Convert database names to 5.1 format. Only database names that
     contain special characters are affected.

   *  `--fix-table-names'

     Convert table names to 5.1 format. Only table names that contain
     special characters are affected. This option also applies to views.

   *  `--force', `-f'

     Continue even if an SQL error occurs.

   *  `--host=HOST_NAME', `-h HOST_NAME'

     Connect to the MySQL server on the given host.

   *  `--medium-check', `-m'

     Do a check that is faster than an `--extended' operation.  This
     finds only 99.99% of all errors, which should be good enough in
     most cases.

   *  `--optimize', `-o'

     Optimize the tables.

   *  `--password[=PASSWORD]', `-p[PASSWORD]'

     The password to use when connecting to the server. If you use the
     short option form (`-p'), you _cannot_ have a space between the
     option and the password. If you omit the PASSWORD value following
     the `--password' or `-p' option on the command line, *Note
     `mysqlcheck': mysqlcheck. prompts for one.

     Specifying a password on the command line should be considered
     insecure. See *Note password-security-user::. You can use an
     option file to avoid giving the password on the command line.

   *  `--pipe', `-W'

     On Windows, connect to the server using a named pipe. This option
     applies only if the server supports named-pipe connections.

   *  `--plugin-dir=PATH'

     The directory in which to look for plugins. It may be necessary to
     specify this option if the `--default-auth' option is used to
     specify an authentication plugin but *Note `mysqlcheck':
     mysqlcheck. does not find it. See *Note pluggable-authentication::.

     This option was added in MySQL 5.5.10.

   *  `--port=PORT_NUM', `-P PORT_NUM'

     The TCP/IP port number to use for the connection.

   *  `--protocol={TCP|SOCKET|PIPE|MEMORY}'

     The connection protocol to use for connecting to the server.  It
     is useful when the other connection parameters normally would
     cause a protocol to be used other than the one you want. For
     details on the permissible values, see *Note connecting::.

   *  `--quick', `-q'

     If you are using this option to check tables, it prevents the
     check from scanning the rows to check for incorrect links. This is
     the fastest check method.

     If you are using this option to repair tables, it tries to repair
     only the index tree. This is the fastest repair method.

   *  `--repair', `-r'

     Perform a repair that can fix almost anything except unique keys
     that are not unique.

   *  `--silent', `-s'

     Silent mode. Print only error messages.

   *  `--socket=PATH', `-S PATH'

     For connections to `localhost', the Unix socket file to use, or,
     on Windows, the name of the named pipe to use.

   *  `--ssl*'

     Options that begin with `--ssl' specify whether to connect to the
     server using SSL and indicate where to find SSL keys and
     certificates. See *Note ssl-options::.

   *  `--tables'

     Override the `--databases' or `-B' option. All name arguments
     following the option are regarded as table names.

   *  `--use-frm'

     For repair operations on `MyISAM' tables, get the table structure
     from the `.frm' file so that the table can be repaired even if the
     `.MYI' header is corrupted.

   *  `--user=USER_NAME', `-u USER_NAME'

     The MySQL user name to use when connecting to the server.

   *  `--verbose', `-v'

     Verbose mode. Print information about the various stages of
     program operation.

   *  `--version', `-V'

     Display version information and exit.

   *  `--write-binlog'

     This option is enabled by default, so that *Note `ANALYZE TABLE':
     analyze-table, *Note `OPTIMIZE TABLE': optimize-table, and *Note
     `REPAIR TABLE': repair-table. statements generated by *Note
     `mysqlcheck': mysqlcheck. are written to the binary log. Use
     `--skip-write-binlog' to cause `NO_WRITE_TO_BINLOG' to be added to
     the statements so that they are not logged. Use the
     `--skip-write-binlog' when these statements should not be sent to
     replication slaves or run when using the binary logs for recovery
     from backup.


File: manual.info,  Node: mysqldump,  Next: mysqlimport,  Prev: mysqlcheck,  Up: programs-client

4.5.4 `mysqldump' -- A Database Backup Program
----------------------------------------------

The *Note `mysqldump': mysqldump. client is a utility that performs
logical backups, producing a set of SQL statements that can be run to
reproduce the original schema objects, table data, or both. It dumps
one or more MySQL database for backup or transfer to another SQL
server. The *Note `mysqldump': mysqldump. command can also generate
output in CSV, other delimited text, or XML format.

*Note `mysqldump': mysqldump. requires at least the `SELECT' privilege
for dumped tables, `SHOW VIEW' for dumped views, `TRIGGER' for dumped
triggers, and `LOCK TABLES' if the `--single-transaction' option is not
used. Certain options might require other privileges as noted in the
option descriptions.

To reload a dump file, you must have the same privileges needed to
create each of the dumped objects by issuing `CREATE' statements
manually.

*Note `mysqldump': mysqldump. output can include *Note `ALTER
DATABASE': alter-database. statements that change the database
collation. These may be used when dumping stored programs to preserve
their character encodings. To reload a dump file containing such
statements, the `ALTER' privilege for the affected database is required.

If you are performing a backup on the server and your tables all are
*Note `MyISAM': myisam-storage-engine. tables, you can also use *Note
`mysqlhotcopy': mysqlhotcopy. for this purpose.

* Performance and Scalability Considerations *

`mysqldump' advantages include the convenience and flexibility of
viewing or even editing the output before restoring. You can clone
databases for development and DBA work, or produce slight variations of
an existing database for testing. It is not intended as a fast or
scalable solution for backing up substantial amounts of data. With
large data sizes, even if the backup step takes a reasonable time,
restoring the data can be very slow because replaying the SQL statements
involves disk I/O for insertion, index creation, and so on.

For large-scale backup and restore, a physical backup is more
appropriate, to copy the data files in their original format that can
be restored quickly:

   * If your tables are primarily `InnoDB' tables, or if you have a mix
     of `InnoDB' and `MyISAM' tables, consider using the `mysqlbackup'
     command of the MySQL Enterprise Backup product. (Available as part
     of the Enterprise subscription.) It provides the best performance
     for `InnoDB' backups with minimal disruption; it can also back up
     tables from `MyISAM' and other storage engines; and it provides a
     number of convenient options to accommodate different backup
     scenarios. See MySQL Enterprise Backup User's Guide (Version
     3.8.2)
     (http://dev.mysql.com/doc/mysql-enterprise-backup/3.8/en/index.html).

   * If your tables are primarily `MyISAM' tables, consider using the
     *Note `mysqlhotcopy': mysqlhotcopy.  instead, for better
     performance than *Note `mysqldump': mysqldump. of backup and
     restore operations. See *Note mysqlhotcopy::.

*Note `mysqldump': mysqldump. can retrieve and dump table contents row
by row, or it can retrieve the entire content from a table and buffer
it in memory before dumping it. Buffering in memory can be a problem if
you are dumping large tables. To dump tables row by row, use the
`--quick' option (or `--opt', which enables `--quick'). The `--opt'
option (and hence `--quick') is enabled by default, so to enable memory
buffering, use `--skip-quick'.

If you are using a recent version of *Note `mysqldump': mysqldump. to
generate a dump to be reloaded into a very old MySQL server, use the
`--skip-opt' option instead of the `--opt' or `--extended-insert'
option.

For additional information about *Note `mysqldump': mysqldump, see
*Note using-mysqldump::.

* Syntax *

There are in general three ways to use *Note `mysqldump':
mysqldump.--in order to dump a set of one or more tables, a set of one
or more complete databases, or an entire MySQL server--as shown here:

     shell> mysqldump [OPTIONS] DB_NAME [TBL_NAME ...]
     shell> mysqldump [OPTIONS] --databases DB_NAME ...
     shell> mysqldump [OPTIONS] --all-databases

To dump entire databases, do not name any tables following DB_NAME, or
use the `--databases' or `--all-databases' option.

*Note `mysqldump': mysqldump. does not dump the `INFORMATION_SCHEMA'
database by default.  *Note `mysqldump': mysqldump. dumps
`INFORMATION_SCHEMA' only if you name it explicitly on the command
line, although currently you must also use the `--skip-lock-tables'
option. Before MySQL 5.5 *Note `mysqldump': mysqldump. silently ignores
`INFORMATION_SCHEMA' even if you name it explicitly on the command line.

*Note `mysqldump': mysqldump. does not dump the `performance_schema'
database.

Before MySQL 5.5.25, *Note `mysqldump': mysqldump. does not dump the
`general_log' or `slow_query_log' tables for dumps of the `mysql'
database. As of 5.5.25, the dump includes statements to recreate those
tables so that they are not missing after reloading the dump file. Log
table contents are not dumped.

*Note `mysqldump': mysqldump. also does not dump the MySQL Cluster
`ndbinfo' information database.

To see a list of the options your version of *Note `mysqldump':
mysqldump. supports, execute *Note `mysqldump --help': mysqldump.

Some *Note `mysqldump': mysqldump. options are shorthand for groups of
other options:

   * Use of `--opt' is the same as specifying `--add-drop-table',
     `--add-locks', `--create-options', `--disable-keys',
     `--extended-insert', `--lock-tables', `--quick', and
     `--set-charset'. All of the options that `--opt' stands for also
     are on by default because `--opt' is on by default.

   * Use of `--compact' is the same as specifying
     `--skip-add-drop-table', `--skip-add-locks', `--skip-comments',
     `--skip-disable-keys', and `--skip-set-charset' options.

To reverse the effect of a group option, uses its `--skip-XXX' form
(`--skip-opt' or `--skip-compact').  It is also possible to select only
part of the effect of a group option by following it with options that
enable or disable specific features. Here are some examples:

   * To select the effect of `--opt' except for some features, use the
     `--skip' option for each feature. To disable extended inserts and
     memory buffering, use `--opt' `--skip-extended-insert'
     `--skip-quick'.  (Actually, `--skip-extended-insert' `--skip-quick'
     is sufficient because `--opt' is on by default.)

   * To reverse `--opt' for all features except index disabling and
     table locking, use `--skip-opt' `--disable-keys' `--lock-tables'.

When you selectively enable or disable the effect of a group option,
order is important because options are processed first to last. For
example, `--disable-keys' `--lock-tables' `--skip-opt' would not have
the intended effect; it is the same as `--skip-opt' by itself.

*Note `mysqldump': mysqldump. can retrieve and dump table contents row
by row, or it can retrieve the entire content from a table and buffer
it in memory before dumping it. Buffering in memory can be a problem if
you are dumping large tables. To dump tables row by row, use the
`--quick' option (or `--opt', which enables `--quick'). The `--opt'
option (and hence `--quick') is enabled by default, so to enable memory
buffering, use `--skip-quick'.

If you are using a recent version of *Note `mysqldump': mysqldump. to
generate a dump to be reloaded into a very old MySQL server, you should
not use the `--opt' or `--extended-insert' option. Use `--skip-opt'
instead.

For additional information about *Note `mysqldump': mysqldump, see
*Note using-mysqldump::.

*Note `mysqldump': mysqldump. supports the following options, which can
be specified on the command line or in the `[mysqldump]' and `[client]'
groups of an option file. *Note `mysqldump': mysqldump. also supports
the options for processing option files described at *Note
option-file-options::.

*`mysqldump' Options*

Format      Option File Description                   IntroducedRemoved
-add-drop-databaseadd-drop-databaseAdd a DROP DATABASE                   
                        statement before each CREATE          
                        DATABASE statement                    
-add-drop-tableadd-drop-tableAdd a DROP TABLE statement            
                        before each CREATE TABLE              
                        statement                             
-add-locks  add-locks   Surround each table dump              
                        with LOCK TABLES and UNLOCK           
                        TABLES statements                     
-all-databasesall-databasesDump all tables in all                
                        databases                             
-allow-keywordsallow-keywordsAllow creation of column              
                        names that are keywords               
-apply-slave-statementsapply-slave-statementsInclude STOP SLAVE prior to   5.5.3   
                        CHANGE MASTER statement and           
                        START SLAVE at end of output          
-bind-address=ip_addressbind-addressUse the specified network     5.5.8   
                        interface to connect to the           
                        MySQL Server                          
-comments   comments    Add comments to the dump file         
-compact    compact     Produce more compact output           
-compatible=name[,name,...]compatible  Produce output that is more           
                        compatible with other                 
                        database systems or with              
                        older MySQL servers                   
-complete-insertcomplete-insertUse complete INSERT                   
                        statements that include               
                        column names                          
-create-optionscreate-optionsInclude all MySQL-specific            
                        table options in CREATE               
                        TABLE statements                      
-databases  databases   Dump several databases                
-debug[=debug_options]debug       Write a debugging log                 
-debug-checkdebug-check Print debugging information           
                        when the program exits                
-debug-info debug-info  Print debugging information,          
                        memory and CPU statistics             
                        when the program exits                
-default-auth=plugindefault-auth=pluginThe authentication plugin to  5.5.9   
                        use                                   
-default-character-set=charset_namedefault-character-setUse charset_name as the               
                        default character set                 
-delayed-insertdelayed-insertWrite INSERT DELAYED                  
                        statements rather than                
                        INSERT statements                     
-delete-master-logsdelete-master-logsOn a master replication               
                        server, delete the binary             
                        logs after performing the             
                        dump operation                        
-disable-keysdisable-keysFor each table, surround the          
                        INSERT statements with                
                        statements to disable and             
                        enable keys                           
-dump-date  dump-date   Include dump date as "Dump            
                        completed on" comment if              
                        -comments is given                    
-dump-slave[=value]dump-slave  Include CHANGE MASTER         5.5.3   
                        statement that lists binary           
                        log coordinates of slave's            
                        master                                
-events     events      Dump events from the dumped           
                        databases                             
-extended-insertextended-insertUse multiple-row INSERT               
                        syntax that include several           
                        VALUES lists                          
-fields-enclosed-by=stringfields-enclosed-byThis option is used with the          
                        -tab option and has the same          
                        meaning as the corresponding          
                        clause for LOAD DATA INFILE           
-fields-escaped-byfields-escaped-byThis option is used with the          
                        -tab option and has the same          
                        meaning as the corresponding          
                        clause for LOAD DATA INFILE           
-fields-optionally-enclosed-by=stringfields-optionally-enclosed-byThis option is used with the          
                        -tab option and has the same          
                        meaning as the corresponding          
                        clause for LOAD DATA INFILE           
-fields-terminated-by=stringfields-terminated-byThis option is used with the          
                        -tab option and has the same          
                        meaning as the corresponding          
                        clause for LOAD DATA INFILE           
-first-slavefirst-slave Deprecated; use                       5.5.3
                        -lock-all-tables instead              
-flush-logs flush-logs  Flush the MySQL server log            
                        files before starting the             
                        dump                                  
-flush-privilegesflush-privilegesEmit a FLUSH PRIVILEGES               
                        statement after dumping the           
                        mysql database                        
-help                   Display help message and exit         
-hex-blob   hex-blob    Dump binary columns using             
                        hexadecimal notation (for             
                        example, 'abc' becomes                
                        0x616263)                             
-host       host        Host to connect to (IP                
                        address or hostname)                  
-ignore-table=db_name.tbl_nameignore-tableDo not dump the given table           
-include-master-host-portinclude-master-host-portInclude                       5.5.3   
                        MASTER_HOST/MASTER_PORT               
                        options in CHANGE MASTER              
                        statement produced with               
                        -dump-slave                           
-insert-ignoreinsert-ignoreWrite INSERT IGNORE                   
                        statements rather than                
                        INSERT statements                     
-lines-terminated-by=stringlines-terminated-byThis option is used with the          
                        -tab option and has the same          
                        meaning as the corresponding          
                        clause for LOAD DATA INFILE           
-lock-all-tableslock-all-tablesLock all tables across all            
                        databases                             
-lock-tableslock-tables Lock all tables before                
                        dumping them                          
-log-error=file_namelog-error   Append warnings and errors            
                        to the named file                     
-master-data[=value]master-data Write the binary log file             
                        name and position to the              
                        output                                
-max_allowed_packet=valuemax_allowed_packetThe maximum packet length to          
                        send to or receive from the           
                        server                                
-net_buffer_length=valuenet_buffer_lengthThe buffer size for TCP/IP            
                        and socket communication              
-no-autocommitno-autocommitEnclose the INSERT                    
                        statements for each dumped            
                        table within SET autocommit           
                        = 0 and COMMIT statements             
-no-create-dbno-create-dbThis option suppresses the            
                        CREATE DATABASE statements            
-no-create-infono-create-infoDo not write CREATE TABLE             
                        statements that re-create             
                        each dumped table                     
-no-data    no-data     Do not dump table contents            
-no-set-namesno-set-namesSame as -skip-set-charset             
-no-tablespacesno-tablespacesDo not write any CREATE               
                        LOGFILE GROUP or CREATE               
                        TABLESPACE statements in              
                        output                                
-opt        opt         Shorthand for                         
                        -add-drop-table -add-locks            
                        -create-options                       
                        -disable-keys                         
                        -extended-insert                      
                        -lock-tables -quick                   
                        -set-charset.                         
-order-by-primaryorder-by-primaryDump each table's rows                
                        sorted by its primary key,            
                        or by its first unique index          
-password[=password]password    The password to use when              
                        connecting to the server              
-pipe                   On Windows, connect to                
                        server using a named pipe             
-plugin-dir=pathplugin-dir=pathThe directory where plugins   5.5.9   
                        are located                           
-port=port_numport        The TCP/IP port number to             
                        use for the connection                
-protocol=typeprotocol    The connection protocol to            
                        use                                   
-quick      quick       Retrieve rows for a table             
                        from the server a row at a            
                        time                                  
-quote-namesquote-names Quote identifiers within              
                        backtick characters                   
-replace    replace     Write REPLACE statements              
                        rather than INSERT statements         
-result-file=fileresult-file Direct output to a given file         
-routines   routines    Dump stored routines                  
                        (procedures and functions)            
                        from the dumped databases             
-set-charsetset-charset Add SET NAMES                         
                        default_character_set to              
                        output                                
-single-transactionsingle-transactionThis option issues a BEGIN            
                        SQL statement before dumping          
                        data from the server                  
-skip-add-drop-tableskip-add-drop-tableDo not add a DROP TABLE               
                        statement before each CREATE          
                        TABLE statement                       
-skip-add-locksskip-add-locksDo not add locks                      
-skip-commentsskip-commentsDo not add comments to the            
                        dump file                             
-skip-compactskip-compactDo not produce more compact           
                        output                                
-skip-disable-keysskip-disable-keysDo not disable keys                   
-skip-extended-insertskip-extended-insertTurn off extended-insert              
-skip-opt   skip-opt    Turn off the options set by           
                        -opt                                  
-skip-quick skip-quick  Do not retrieve rows for a            
                        table from the server a row           
                        at a time                             
-skip-quote-namesskip-quote-namesDo not quote identifiers              
-skip-set-charsetskip-set-charsetSuppress the SET NAMES                
                        statement                             
-skip-triggersskip-triggersDo not dump triggers                  
-skip-tz-utcskip-tz-utc Turn off tz-utc                       
-socket=pathsocket      For connections to localhost          
-ssl-ca=file_namessl-ca      The path to a file that               
                        contains a list of trusted            
                        SSL CAs                               
-ssl-capath=dir_namessl-capath  The path to a directory that          
                        contains trusted SSL CA               
                        certificates in PEM format            
-ssl-cert=file_namessl-cert    The name of the SSL                   
                        certificate file to use for           
                        establishing a secure                 
                        connection                            
-ssl-cipher=cipher_listssl-cipher  A list of allowable ciphers           
                        to use for SSL encryption             
-ssl-key=file_namessl-key     The name of the SSL key file          
                        to use for establishing a             
                        secure connection                     
-ssl-verify-server-certssl-verify-server-certThe server's Common Name              
                        value in its certificate is           
                        verified against the host             
                        name used when connecting to          
                        the server                            
-tab=path   tab         Produce tab-separated data            
                        files                                 
-tables     tables      Override the -databases or            
                        -B option                             
-triggers   triggers    Dump triggers for each                
                        dumped table                          
-tz-utc     tz-utc      Add SET TIME_ZONE='+00:00'            
                        to the dump file                      
-user=user_nameuser        MySQL user name to use when           
                        connecting to server                  
-verbose                Verbose mode                          
-version                Display version information           
                        and exit                              
-where='where_condition'where       Dump only rows selected by            
                        the given WHERE condition             
-xml        xml         Produce XML output                    

   *  `--help', `-?'

     Display a help message and exit.

   *  `--add-drop-database'

     Add a *Note `DROP DATABASE': drop-database. statement before each
     *Note `CREATE DATABASE': create-database.  statement. This option
     is typically used in conjunction with the `--all-databases' or
     `--databases' option because no *Note `CREATE DATABASE':
     create-database. statements are written unless one of those
     options is specified.

   *  `--add-drop-table'

     Add a *Note `DROP TABLE': drop-table. statement before each *Note
     `CREATE TABLE': create-table.  statement.

   *  `--add-drop-trigger'

     Add a *Note `DROP TRIGGER': drop-trigger. statement before each
     *Note `CREATE TRIGGER': create-trigger.  statement.

     *Note*:

     This option is supported only by *Note `mysqldump': mysqldump. as
     supplied with MySQL Cluster. It is not available when using MySQL
     Server 5.5.

   *  `--add-locks'

     Surround each table dump with *Note `LOCK TABLES': lock-tables. and
     *Note `UNLOCK TABLES': lock-tables. statements. This results in
     faster inserts when the dump file is reloaded. See *Note
     insert-speed::.

   *  `--all-databases', `-A'

     Dump all tables in all databases. This is the same as using the
     `--databases' option and naming all the databases on the command
     line.

   *  `--all-tablespaces', `-Y'

     Adds to a table dump all SQL statements needed to create any
     tablespaces used by an *Note `NDBCLUSTER': mysql-cluster. table.
     This information is not otherwise included in the output from
     *Note `mysqldump': mysqldump. This option is currently relevant
     only to MySQL Cluster tables.

   *  `--allow-keywords'

     Permit creation of column names that are keywords. This works by
     prefixing each column name with the table name.

   *  `--apply-slave-statements'

     For a slave dump produced with the `--dump-slave' option, add a
     *Note `STOP SLAVE': stop-slave. statement before the *Note `CHANGE
     MASTER TO': change-master-to.  statement and a *Note `START
     SLAVE': start-slave.  statement at the end of the output. This
     option was added in MySQL 5.5.3.

   *  `--bind-address=IP_ADDRESS'

     On a computer having multiple network interfaces, this option can
     be used to select which interface is employed when connecting to
     the MySQL server.

     This option is supported only in the version of *Note `mysqldump':
     mysqldump. that is supplied with MySQL Cluster. It is not
     available in standard MySQL Server 5.5 releases.

   *  `--character-sets-dir=PATH'

     The directory where character sets are installed. See *Note
     charset-configuration::.

   *  `--comments', `-i'

     Write additional information in the dump file such as program
     version, server version, and host. This option is enabled by
     default. To suppress this additional information, use
     `--skip-comments'.

   *  `--compact'

     Produce more compact output. This option enables the
     `--skip-add-drop-table', `--skip-add-locks', `--skip-comments',
     `--skip-disable-keys', and `--skip-set-charset' options.

   *  `--compatible=NAME'

     Produce output that is more compatible with other database systems
     or with older MySQL servers. The value of NAME can be `ansi',
     `mysql323', `mysql40', `postgresql', `oracle', `mssql', `db2',
     `maxdb', `no_key_options', `no_table_options', or
     `no_field_options'. To use several values, separate them by
     commas. These values have the same meaning as the corresponding
     options for setting the server SQL mode. See *Note
     server-sql-mode::.

     This option does not guarantee compatibility with other servers.
     It only enables those SQL mode values that are currently available
     for making dump output more compatible.  For example,
     `--compatible=oracle' does not map data types to Oracle types or
     use Oracle comment syntax.

     _This option requires a server version of 4.1.0 or higher_. With
     older servers, it does nothing.

   *  `--complete-insert', `-c'

     Use complete *Note `INSERT': insert.  statements that include
     column names.

   *  `--compress', `-C'

     Compress all information sent between the client and the server if
     both support compression.

   *  `--create-options'

     Include all MySQL-specific table options in the *Note `CREATE
     TABLE': create-table. statements.

   *  `--databases', `-B'

     Dump several databases. Normally, *Note `mysqldump': mysqldump.
     treats the first name argument on the command line as a database
     name and following names as table names. With this option, it
     treats all name arguments as database names. *Note `CREATE
     DATABASE': create-database. and *Note `USE': use.  statements are
     included in the output before each new database.

   *  `--debug[=DEBUG_OPTIONS]', `-# [DEBUG_OPTIONS]'

     Write a debugging log. A typical DEBUG_OPTIONS string is
     `'d:t:o,FILE_NAME''.  The default value is
     `'d:t:o,/tmp/mysqldump.trace''.

   *  `--debug-check'

     Print some debugging information when the program exits.

   *  `--debug-info'

     Print debugging information and memory and CPU usage statistics
     when the program exits.

   *  `--default-auth=PLUGIN'

     The client-side authentication plugin to use. See *Note
     pluggable-authentication::.

     This option was added in MySQL 5.5.9.

   *  `--default-character-set=CHARSET_NAME'

     Use CHARSET_NAME as the default character set. See *Note
     charset-configuration::.  If no character set is specified, *Note
     `mysqldump': mysqldump. uses `utf8', and earlier versions use
     `latin1'.

   *  `--delayed-insert'

     Write *Note `INSERT DELAYED': insert-delayed.  statements rather
     than *Note `INSERT': insert.  statements.

   *  `--delete-master-logs'

     On a master replication server, delete the binary logs by sending
     a *Note `PURGE BINARY LOGS': purge-binary-logs.  statement to the
     server after performing the dump operation.  This option
     automatically enables `--master-data'.

   *  `--disable-keys', `-K'

     For each table, surround the *Note `INSERT': insert. statements
     with `/*!40000 ALTER TABLE TBL_NAME DISABLE KEYS */;' and
     `/*!40000 ALTER TABLE TBL_NAME ENABLE KEYS */;' statements. This
     makes loading the dump file faster because the indexes are created
     after all rows are inserted. This option is effective only for
     nonunique indexes of `MyISAM' tables. It has no effect for other
     tables.

   *  `--dump-date'

     If the `--comments' option is given, *Note `mysqldump': mysqldump.
     produces a comment at the end of the dump of the following form:

          -- Dump completed on DATE

     However, the date causes dump files taken at different times to
     appear to be different, even if the data are otherwise identical.
     `--dump-date' and `--skip-dump-date' control whether the date is
     added to the comment. The default is `--dump-date' (include the
     date in the comment).  `--skip-dump-date' suppresses date printing.

   *  `--dump-slave[=VALUE]'

     This option is similar to `--master-data' except that it is used
     to dump a replication slave server to produce a dump file that can
     be used to set up another server as a slave that has the same
     master as the dumped server. It causes the dump output to include a
     *Note `CHANGE MASTER TO': change-master-to. statement that
     indicates the binary log coordinates (file name and position) of
     the dumped slave's master (rather than the coordinates of the
     dumped server, as is done by the `--master-data' option).  These
     are the master server coordinates from which the slave should
     start replicating. This option was added in MySQL 5.5.3.

     The option value is handled the same way as for `--master-data'
     and has the same effect as `--master-data' in terms of enabling or
     disabling other options and in how locking is handled.

     This option causes *Note `mysqldump': mysqldump. to stop the slave
     SQL thread before the dump and restart it again after.

     In conjunction with `--dump-slave', the `--apply-slave-statements'
     and `--include-master-host-port' options can also be used.

   *  `--events', `-E'

     Include Event Scheduler events for the dumped databases in the
     output.

   *  `--extended-insert', `-e'

     Use multiple-row *Note `INSERT': insert.  syntax that include
     several `VALUES' lists.  This results in a smaller dump file and
     speeds up inserts when the file is reloaded.

   *  `--fields-terminated-by=...',

     `--fields-enclosed-by=...',

     `--fields-optionally-enclosed-by=...',

     `--fields-escaped-by=...'

     These options are used with the `--tab' option and have the same
     meaning as the corresponding `FIELDS' clauses for *Note `LOAD DATA
     INFILE': load-data. See *Note load-data::.

   *  `--first-slave'

     Deprecated. Use `--lock-all-tables' instead.  `--first-slave' was
     removed in MySQL 5.5.3.

   *  `--flush-logs', `-F'

     Flush the MySQL server log files before starting the dump.  This
     option requires the `RELOAD' privilege. If you use this option in
     combination with the `--all-databases' option, the logs are
     flushed _for each database dumped_. The exception is when using
     `--lock-all-tables', `--master-data', or (as of MySQL 5.5.21)
     `--single-transaction': In this case, the logs are flushed only
     once, corresponding to the moment that all tables are locked. If
     you want your dump and the log flush to happen at exactly the same
     moment, you should use `--flush-logs' together with
     `--lock-all-tables', `--master-data', or `--single-transaction'.

   *  `--flush-privileges'

     Add a *Note `FLUSH PRIVILEGES': flush. statement to the dump
     output after dumping the `mysql' database. This option should be
     used any time the dump contains the `mysql' database and any other
     database that depends on the data in the `mysql' database for
     proper restoration.

   *  `--force', `-f'

     Continue even if an SQL error occurs during a table dump.

     One use for this option is to cause *Note `mysqldump': mysqldump.
     to continue executing even when it encounters a view that has
     become invalid because the definition refers to a table that has
     been dropped. Without `--force', *Note `mysqldump': mysqldump.
     exits with an error message.  With `--force', *Note `mysqldump':
     mysqldump. prints the error message, but it also writes an SQL
     comment containing the view definition to the dump output and
     continues executing.

   *  `--host=HOST_NAME', `-h HOST_NAME'

     Dump data from the MySQL server on the given host. The default
     host is `localhost'.

   *  `--hex-blob'

     Dump binary columns using hexadecimal notation (for example,
     `'abc'' becomes `0x616263'). The affected data types are *Note
     `BINARY': binary-varbinary, *Note `VARBINARY': binary-varbinary,
     the *Note `BLOB': blob. types, and *Note `BIT': bit-type.

   *  `--include-master-host-port'

     For the *Note `CHANGE MASTER TO': change-master-to.  statement in
     a slave dump produced with the `--dump-slave' option, add
     `MASTER_HOST' and `MASTER_PORT' options for the host name and
     TCP/IP port number of the slave's master. This option was added in
     MySQL 5.5.3.

   *  `--ignore-table=DB_NAME.TBL_NAME'

     Do not dump the given table, which must be specified using both
     the database and table names. To ignore multiple tables, use this
     option multiple times. This option also can be used to ignore
     views.

   *  `--insert-ignore'

     Write *Note `INSERT IGNORE': insert. statements rather than *Note
     `INSERT': insert. statements.

   *  `--lines-terminated-by=...'

     This option is used with the `--tab' option and has the same
     meaning as the corresponding `LINES' clause for *Note `LOAD DATA
     INFILE': load-data. See *Note load-data::.

   *  `--lock-all-tables', `-x'

     Lock all tables across all databases. This is achieved by
     acquiring a global read lock for the duration of the whole dump.
     This option automatically turns off `--single-transaction' and
     `--lock-tables'.

   *  `--lock-tables', `-l'

     For each dumped database, lock all tables to be dumped before
     dumping them. The tables are locked with `READ LOCAL' to permit
     concurrent inserts in the case of `MyISAM' tables. For
     transactional tables such as `InnoDB', `--single-transaction' is a
     much better option than `--lock-tables' because it does not need
     to lock the tables at all.

     Because `--lock-tables' locks tables for each database separately,
     this option does not guarantee that the tables in the dump file
     are logically consistent between databases. Tables in different
     databases may be dumped in completely different states.

   *  `--log-error=FILE_NAME'

     Log warnings and errors by appending them to the named file.  The
     default is to do no logging.

   *  `--master-data[=VALUE]'

     Use this option to dump a master replication server to produce a
     dump file that can be used to set up another server as a slave of
     the master. It causes the dump output to include a *Note `CHANGE
     MASTER TO': change-master-to.  statement that indicates the binary
     log coordinates (file name and position) of the dumped server.
     These are the master server coordinates from which the slave
     should start replicating after you load the dump file into the
     slave.

     If the option value is 2, the *Note `CHANGE MASTER TO':
     change-master-to. statement is written as an SQL comment, and thus
     is informative only; it has no effect when the dump file is
     reloaded. If the option value is 1, the statement is not written
     as a comment and takes effect when the dump file is reloaded. If
     no option value is specified, the default value is 1.

     This option requires the `RELOAD' privilege and the binary log
     must be enabled.

     The `--master-data' option automatically turns off
     `--lock-tables'. It also turns on `--lock-all-tables', unless
     `--single-transaction' also is specified, in which case, a global
     read lock is acquired only for a short time at the beginning of
     the dump (see the description for `--single-transaction'). In all
     cases, any action on logs happens at the exact moment of the dump.

     It is also possible to set up a slave by dumping an existing slave
     of the master. In MySQL 5.5.3 and later, you can create such a
     dump using the `--dump-slave' option.

     In MySQL 5.2.2 and earlier, use the following procedure on the
     existing slave:

       1. Stop the slave's SQL thread and get its current status:

               mysql> STOP SLAVE SQL_THREAD;
               mysql> SHOW SLAVE STATUS;

       2. From the output of the *Note `SHOW SLAVE STATUS':
          show-slave-status. statement, the binary log coordinates of
          the master server from which the new slave should start
          replicating are the values of the `Relay_Master_Log_File' and
          `Exec_Master_Log_Pos' fields. Denote those values as
          FILE_NAME and FILE_POS.

       3. Dump the slave server:

               shell> mysqldump --master-data=2 --all-databases > dumpfile

          Using `--master-data=2' works only if binary logging has been
          enabled on the slave. Otherwise, *Note `mysqldump':
          mysqldump. fails with the error `Binlogging on server not
          active'.  In this case you must handle any locking issues in
          another manner, using one or more of `--add-locks',
          `--lock-tables', `--lock-all-tables', or
          `--single-transaction', as required by your application and
          environment.

       4. Restart the slave:

               mysql> START SLAVE;

       5. On the new slave, load the dump file:

               shell> mysql < dumpfile

       6. On the new slave, set the replication coordinates to those of
          the master server obtained earlier:

               mysql> CHANGE MASTER TO
                   -> MASTER_LOG_FILE = 'FILE_NAME', MASTER_LOG_POS = FILE_POS;

          The *Note `CHANGE MASTER TO': change-master-to.  statement
          might also need other parameters, such as `MASTER_HOST' to
          point the slave to the correct master server host. Add any
          such parameters as necessary.

   *  `--no-autocommit'

     Enclose the *Note `INSERT': insert. statements for each dumped
     table within `SET autocommit = 0' and *Note `COMMIT': commit.
     statements.

   *  `--no-create-db', `-n'

     This option suppresses the *Note `CREATE DATABASE':
     create-database. statements that are otherwise included in the
     output if the `--databases' or `--all-databases' option is given.

   *  `--no-create-info', `-t'

     Do not write *Note `CREATE TABLE': create-table.  statements that
     re-create each dumped table.

     *Note*:

     This option does _not_ not exclude statements creating log file
     groups or tablespaces from *Note `mysqldump': mysqldump. output;
     however, you can use the `--no-tablespaces' option for this
     purpose.

   *  `--no-data', `-d'

     Do not write any table row information (that is, do not dump table
     contents). This is useful if you want to dump only the *Note
     `CREATE TABLE': create-table. statement for the table (for
     example, to create an empty copy of the table by loading the dump
     file).

   *  `--no-set-names', `-N'

     This has the same effect as `--skip-set-charset'.

   *  `--no-tablespaces', `-y'

     This option suppresses all *Note `CREATE LOGFILE GROUP':
     create-logfile-group. and *Note `CREATE TABLESPACE':
     create-tablespace. statements in the output of *Note `mysqldump':
     mysqldump.

   *  `--opt'

     This option is shorthand. It is the same as specifying
     `--add-drop-table' `--add-locks' `--create-options'
     `--disable-keys' `--extended-insert' `--lock-tables' `--quick'
     `--set-charset'. It should give you a fast dump operation and
     produce a dump file that can be reloaded into a MySQL server
     quickly.

     _The `--opt' option is enabled by default. Use `--skip-opt' to
     disable it._ See the discussion at the beginning of this section
     for information about selectively enabling or disabling a subset
     of the options affected by `--opt'.

   *  `--order-by-primary'

     Dump each table's rows sorted by its primary key, or by its first
     unique index, if such an index exists. This is useful when dumping
     a `MyISAM' table to be loaded into an `InnoDB' table, but will
     make the dump operation take considerably longer.

   *  `--password[=PASSWORD]', `-p[PASSWORD]'

     The password to use when connecting to the server. If you use the
     short option form (`-p'), you _cannot_ have a space between the
     option and the password. If you omit the PASSWORD value following
     the `--password' or `-p' option on the command line, *Note
     `mysqldump': mysqldump. prompts for one.

     Specifying a password on the command line should be considered
     insecure. See *Note password-security-user::. You can use an
     option file to avoid giving the password on the command line.

   *  `--pipe', `-W'

     On Windows, connect to the server using a named pipe. This option
     applies only if the server supports named-pipe connections.

   *  `--plugin-dir=PATH'

     The directory in which to look for plugins. It may be necessary to
     specify this option if the `--default-auth' option is used to
     specify an authentication plugin but *Note `mysqldump': mysqldump.
     does not find it. See *Note pluggable-authentication::.

     This option was added in MySQL 5.5.9.

   *  `--port=PORT_NUM', `-P PORT_NUM'

     The TCP/IP port number to use for the connection.

   *  `--protocol={TCP|SOCKET|PIPE|MEMORY}'

     The connection protocol to use for connecting to the server.  It
     is useful when the other connection parameters normally would
     cause a protocol to be used other than the one you want. For
     details on the permissible values, see *Note connecting::.

   *  `--quick', `-q'

     This option is useful for dumping large tables. It forces *Note
     `mysqldump': mysqldump. to retrieve rows for a table from the
     server a row at a time rather than retrieving the entire row set
     and buffering it in memory before writing it out.

   *  `--quote-names', `-Q'

     Quote identifiers (such as database, table, and column names)
     within ```'' characters. If the `ANSI_QUOTES' SQL mode is enabled,
     identifiers are quoted within ``"'' characters. This option is
     enabled by default. It can be disabled with `--skip-quote-names',
     but this option should be given after any option such as
     `--compatible' that may enable `--quote-names'.

   *  `--replace'

     Write *Note `REPLACE': replace. statements rather than *Note
     `INSERT': insert.  statements.

   *  `--result-file=FILE_NAME', `-r FILE_NAME'

     Direct output to a given file. This option should be used on
     Windows to prevent newline ``\n'' characters from being converted
     to ``\r\n'' carriage return/newline sequences. The result file is
     created and its previous contents overwritten, even if an error
     occurs while generating the dump.

   *  `--routines', `-R'

     Include stored routines (procedures and functions) for the dumped
     databases in the output. Use of this option requires the `SELECT'
     privilege for the `mysql.proc' table. The output generated by
     using `--routines' contains *Note `CREATE PROCEDURE':
     create-procedure. and *Note `CREATE FUNCTION': create-function.
     statements to re-create the routines. However, these statements do
     not include attributes such as the routine creation and
     modification timestamps. This means that when the routines are
     reloaded, they will be created with the timestamps equal to the
     reload time.

     If you require routines to be re-created with their original
     timestamp attributes, do not use `--routines'. Instead, dump and
     reload the contents of the `mysql.proc' table directly, using a
     MySQL account that has appropriate privileges for the `mysql'
     database.

     Prior to MySQL 5.5.21, this option had no effect when used
     together with the `--xml' option. (Bug #11760384, Bug #52792)

   *  `--set-charset'

     Add `SET NAMES DEFAULT_CHARACTER_SET' to the output. This option
     is enabled by default. To suppress the `SET NAMES' statement, use
     `--skip-set-charset'.

   *  `--single-transaction'

     This option sets the transaction isolation mode to `REPEATABLE
     READ' and sends a *Note `START TRANSACTION': commit. SQL statement
     to the server before dumping data. It is useful only with
     transactional tables such as `InnoDB', because then it dumps the
     consistent state of the database at the time when *Note `START
     TRANSACTION': commit. was issued without blocking any applications.

     When using this option, you should keep in mind that only `InnoDB'
     tables are dumped in a consistent state. For example, any `MyISAM'
     or `MEMORY' tables dumped while using this option may still change
     state.

     Before MySQL 5.5.3, while a `--single-transaction' dump is in
     process, to ensure a valid dump file (correct table contents and
     binary log coordinates), no other connection should use the
     following statements: *Note `ALTER TABLE': alter-table, *Note
     `CREATE TABLE': create-table, *Note `DROP TABLE': drop-table,
     *Note `RENAME TABLE': rename-table, *Note `TRUNCATE TABLE':
     truncate-table. A consistent read is not isolated from those
     statements, so use of them on a table to be dumped can cause the
     *Note `SELECT': select. that is performed by *Note `mysqldump':
     mysqldump. to retrieve the table contents to obtain incorrect
     contents or fail. As of MySQL 5.5.3, metadata locking prevents
     this situation.

     The `--single-transaction' option and the `--lock-tables' option
     are mutually exclusive because *Note `LOCK TABLES': lock-tables.
     causes any pending transactions to be committed implicitly.

     This option is not supported for MySQL Cluster tables; the results
     cannot be guaranteed to be consistent due to the fact that the
     *Note `NDBCLUSTER': mysql-cluster.  storage engine supports only
     the `READ_COMMITTED' transaction isolation level. You should
     always use *Note `NDB': mysql-cluster. backup and restore instead.

     To dump large tables, you should combine the `--single-transaction'
     option with `--quick'.

   *  `--skip-comments'

     See the description for the `--comments' option.

   *  `--skip-opt'

     See the description for the `--opt' option.

   *  `--socket=PATH', `-S PATH'

     For connections to `localhost', the Unix socket file to use, or,
     on Windows, the name of the named pipe to use.

   *  `--ssl*'

     Options that begin with `--ssl' specify whether to connect to the
     server using SSL and indicate where to find SSL keys and
     certificates. See *Note ssl-options::.

   *  `--tab=PATH', `-T PATH'

     Produce tab-separated text-format data files. For each dumped
     table, *Note `mysqldump': mysqldump. creates a `TBL_NAME.sql' file
     that contains the *Note `CREATE TABLE': create-table. statement
     that creates the table, and the server writes a `TBL_NAME.txt'
     file that contains its data. The option value is the directory in
     which to write the files.

     *Note*:

     This option should be used only when *Note `mysqldump': mysqldump.
     is run on the same machine as the *Note `mysqld': mysqld. server.
     You must have the `FILE' privilege, and the server must have
     permission to write files in the directory that you specify.

     By default, the `.txt' data files are formatted using tab
     characters between column values and a newline at the end of each
     line. The format can be specified explicitly using the
     `--fields-XXX' and `--lines-terminated-by' options.

     Column values are converted to the character set specified by the
     `--default-character-set' option.

   *  `--tables'

     Override the `--databases' or `-B' option. *Note `mysqldump':
     mysqldump.  regards all name arguments following the option as
     table names.

   *  `--triggers'

     Include triggers for each dumped table in the output. This option
     is enabled by default; disable it with `--skip-triggers'.

   *  `--tz-utc'

     This option enables *Note `TIMESTAMP': datetime.  columns to be
     dumped and reloaded between servers in different time zones. *Note
     `mysqldump': mysqldump. sets its connection time zone to UTC and
     adds `SET TIME_ZONE='+00:00'' to the dump file. Without this
     option, *Note `TIMESTAMP': datetime. columns are dumped and
     reloaded in the time zones local to the source and destination
     servers, which can cause the values to change if the servers are
     in different time zones.  `--tz-utc' also protects against changes
     due to daylight saving time.  `--tz-utc' is enabled by default. To
     disable it, use `--skip-tz-utc'.

   *  `--user=USER_NAME', `-u USER_NAME'

     The MySQL user name to use when connecting to the server.

   *  `--verbose', `-v'

     Verbose mode. Print more information about what the program does.

   *  `--version', `-V'

     Display version information and exit.

   *  `--where='WHERE_CONDITION'', `-w 'WHERE_CONDITION''

     Dump only rows selected by the given `WHERE' condition. Quotes
     around the condition are mandatory if it contains spaces or other
     characters that are special to your command interpreter.

     Examples:

          --where="user='jimf'"
          -w"userid>1"
          -w"userid<1"

   *  `--xml', `-X'

     Write dump output as well-formed XML.

     *`NULL', `'NULL'', and Empty Values*: For a column named
     COLUMN_NAME, the `NULL' value, an empty string, and the string
     value `'NULL'' are distinguished from one another in the output
     generated by this option as follows.

     For a column named COLUMN_NAME, the `NULL' value, an empty string,
     and the string value `'NULL'' are distinguished from one another
     in the XML output generated by the *Note `mysqldump': mysqldump.
     `--xml', `-X' option, as shown in this table.

     Value:                             XML Representation:
     `NULL' (_unknown value_)           `<field name="COLUMN_NAME"
                                        xsi:nil="true" />'
     `''' (_empty string_)              `<field
                                        name="COLUMN_NAME"></field>'
     `'NULL'' (_string value_)          `<field
                                        name="COLUMN_NAME">NULL</field>'

     The output from the *Note `mysql': mysql. client when run using
     the `--xml' option also follows the preceding rules. (See *Note
     mysql-command-options::.)

     XML output from *Note `mysqldump': mysqldump. includes the XML
     namespace, as shown here:

          shell> mysqldump --xml -u root world City
          <?xml version="1.0"?>
          <mysqldump xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
          <database name="world">
          <table_structure name="City">
          <field Field="ID" Type="int(11)" Null="NO" Key="PRI" Extra="auto_increment" />
          <field Field="Name" Type="char(35)" Null="NO" Key="" Default="" Extra="" />
          <field Field="CountryCode" Type="char(3)" Null="NO" Key="" Default="" Extra="" />
          <field Field="District" Type="char(20)" Null="NO" Key="" Default="" Extra="" />
          <field Field="Population" Type="int(11)" Null="NO" Key="" Default="0" Extra="" />
          <key Table="City" Non_unique="0" Key_name="PRIMARY" Seq_in_index="1" Column_name="ID"
          Collation="A" Cardinality="4079" Null="" Index_type="BTREE" Comment="" />
          <options Name="City" Engine="MyISAM" Version="10" Row_format="Fixed" Rows="4079"
          Avg_row_length="67" Data_length="273293" Max_data_length="18858823439613951"
          Index_length="43008" Data_free="0" Auto_increment="4080"
          Create_time="2007-03-31 01:47:01" Update_time="2007-03-31 01:47:02"
          Collation="latin1_swedish_ci" Create_options="" Comment="" />
          </table_structure>
          <table_data name="City">
          <row>
          <field name="ID">1</field>
          <field name="Name">Kabul</field>
          <field name="CountryCode">AFG</field>
          <field name="District">Kabol</field>
          <field name="Population">1780000</field>
          </row>

          ...

          <row>
          <field name="ID">4079</field>
          <field name="Name">Rafah</field>
          <field name="CountryCode">PSE</field>
          <field name="District">Rafah</field>
          <field name="Population">92020</field>
          </row>
          </table_data>
          </database>
          </mysqldump>

     Prior to MySQL 5.5.21, this option prevented the `--routines'
     option from working correctly--that is, no stored routines,
     triggers, or events could be dumped in XML format. (Bug #11760384,
     Bug #52792)

You can also set the following variables by using `--VAR_NAME=VALUE'
syntax:

   *  `max_allowed_packet'

     The maximum size of the buffer for client/server communication.
     The default is 24MB, the maximum is 1GB.

   *  `net_buffer_length'

     The initial size of the buffer for client/server communication.
     When creating multiple-row *Note `INSERT': insert. statements (as
     with the `--extended-insert' or `--opt' option), *Note
     `mysqldump': mysqldump. creates rows up to `net_buffer_length'
     length.  If you increase this variable, you should also ensure that
     the `net_buffer_length' variable in the MySQL server is at least
     this large.

     Some options, such as `--opt', automatically enable
     `--lock-tables'. If you want to override this, use
     `--skip-lock-tables' at the end of the option list.

A common use of *Note `mysqldump': mysqldump. is for making a backup of
an entire database:

     shell> mysqldump DB_NAME > BACKUP-FILE.SQL

You can load the dump file back into the server like this:

     shell> mysql DB_NAME < BACKUP-FILE.SQL

Or like this:

     shell> mysql -e "source /PATH-TO-BACKUP/BACKUP-FILE.SQL" DB_NAME

*Note `mysqldump': mysqldump. is also very useful for populating
databases by copying data from one MySQL server to another:

     shell> mysqldump --opt DB_NAME | mysql --host=REMOTE_HOST -C DB_NAME

It is possible to dump several databases with one command:

     shell> mysqldump --databases DB_NAME1 [DB_NAME2 ...] > my_databases.sql

To dump all databases, use the `--all-databases' option:

     shell> mysqldump --all-databases > all_databases.sql

For `InnoDB' tables, *Note `mysqldump': mysqldump. provides a way of
making an online backup:

     shell> mysqldump --all-databases --single-transaction > all_databases.sql

This backup acquires a global read lock on all tables (using *Note
`FLUSH TABLES WITH READ LOCK': flush.) at the beginning of the dump. As
soon as this lock has been acquired, the binary log coordinates are
read and the lock is released. If long updating statements are running
when the *Note `FLUSH': flush. statement is issued, the MySQL server
may get stalled until those statements finish. After that, the dump
becomes lock free and does not disturb reads and writes on the tables.
If the update statements that the MySQL server receives are short (in
terms of execution time), the initial lock period should not be
noticeable, even with many updates.

For point-in-time recovery (also known as `roll-forward,' when you need
to restore an old backup and replay the changes that happened since
that backup), it is often useful to rotate the binary log (see *Note
binary-log::) or at least know the binary log coordinates to which the
dump corresponds:

     shell> mysqldump --all-databases --master-data=2 > all_databases.sql

Or:

     shell> mysqldump --all-databases --flush-logs --master-data=2
                   > all_databases.sql

The `--master-data' and `--single-transaction' options can be used
simultaneously, which provides a convenient way to make an online
backup suitable for use prior to point-in-time recovery if tables are
stored using the `InnoDB' storage engine.

For more information on making backups, see *Note backup-methods::, and
*Note backup-strategy-example::.

If you encounter problems backing up views, please read the section
that covers restrictions on views which describes a workaround for
backing up views when this fails due to insufficient privileges. See
*Note view-restrictions::.


File: manual.info,  Node: mysqlimport,  Next: mysqlshow,  Prev: mysqldump,  Up: programs-client

4.5.5 `mysqlimport' -- A Data Import Program
--------------------------------------------

The *Note `mysqlimport': mysqlimport. client provides a command-line
interface to the *Note `LOAD DATA INFILE': load-data. SQL statement.
Most options to *Note `mysqlimport': mysqlimport. correspond directly
to clauses of *Note `LOAD DATA INFILE': load-data. syntax. See *Note
load-data::.

Invoke *Note `mysqlimport': mysqlimport. like this:

     shell> mysqlimport [OPTIONS] DB_NAME TEXTFILE1 [TEXTFILE2 ...]

For each text file named on the command line, *Note `mysqlimport':
mysqlimport. strips any extension from the file name and uses the
result to determine the name of the table into which to import the
file's contents. For example, files named `patient.txt',
`patient.text', and `patient' all would be imported into a table named
`patient'.

*Note `mysqlimport': mysqlimport. supports the following options, which
can be specified on the command line or in the `[mysqlimport]' and
`[client]' groups of an option file. *Note `mysqlimport': mysqlimport.
also supports the options for processing option files described at
*Note option-file-options::.

*`mysqlimport' Options*

Format      Option File Description                   Introduced
-columns=column_listcolumns     This option takes a           
                        comma-separated list of       
                        column names as its value     
-compress   compress    Compress all information      
                        sent between the client and   
                        the server                    
-debug[=debug_options]debug       Write a debugging log         
-debug-checkdebug-check Print debugging information   
                        when the program exits        
-debug-info debug-info  Print debugging information,  
                        memory and CPU statistics     
                        when the program exits        
-default-auth=plugindefault-auth=pluginThe authentication plugin to  5.5.10
                        use                           
-default-character-set=charset_namedefault-character-setUse charset_name as the       
                        default character set         
-delete     delete      Empty the table before        
                        importing the text file       
-fields-enclosed-by=stringfields-enclosed-byThis option has the same      
                        meaning as the corresponding  
                        clause for LOAD DATA INFILE   
-fields-escaped-byfields-escaped-byThis option has the same      
                        meaning as the corresponding  
                        clause for LOAD DATA INFILE   
-fields-optionally-enclosed-by=stringfields-optionally-enclosed-byThis option has the same      
                        meaning as the corresponding  
                        clause for LOAD DATA INFILE   
-fields-terminated-by=stringfields-terminated-by- This option has the same    
                        meaning as the corresponding  
                        clause for LOAD DATA INFILE   
-force      force       Continue even if an SQL       
                        error occurs                  
-help                   Display help message and exit 
-host=host_namehost        Connect to the MySQL server   
                        on the given host             
-ignore     ignore      See the description for the   
                        -replace option               
-ignore-lines=#ignore-linesIgnore the first N lines of   
                        the data file                 
-lines-terminated-by=stringlines-terminated-byThis option has the same      
                        meaning as the corresponding  
                        clause for LOAD DATA INFILE   
-local      local       Read input files locally      
                        from the client host          
-lock-tableslock-tables Lock all tables for writing   
                        before processing any text    
                        files                         
-low-prioritylow-priorityUse LOW_PRIORITY when         
                        loading the table.            
-password[=password]password    The password to use when      
                        connecting to the server      
-pipe                   On Windows, connect to        
                        server using a named pipe     
-plugin-dir=pathplugin-dir=pathThe directory where plugins   5.5.10
                        are located                   
-port=port_numport        The TCP/IP port number to     
                        use for the connection        
-protocol=typeprotocol    The connection protocol to    
                        use                           
-replace    replace     The -replace and -ignore      
                        options control handling of   
                        input rows that duplicate     
                        existing rows on unique key   
                        values                        
-silent     silent      Produce output only when      
                        errors occur                  
-socket=pathsocket      For connections to localhost  
-ssl-ca=file_namessl-ca      The path to a file that       
                        contains a list of trusted    
                        SSL CAs                       
-ssl-capath=dir_namessl-capath  The path to a directory that  
                        contains trusted SSL CA       
                        certificates in PEM format    
-ssl-cert=file_namessl-cert    The name of the SSL           
                        certificate file to use for   
                        establishing a secure         
                        connection                    
-ssl-cipher=cipher_listssl-cipher  A list of allowable ciphers   
                        to use for SSL encryption     
-ssl-key=file_namessl-key     The name of the SSL key file  
                        to use for establishing a     
                        secure connection             
-ssl-verify-server-certssl-verify-server-certThe server's Common Name      
                        value in its certificate is   
                        verified against the host     
                        name used when connecting to  
                        the server                    
-use-threads=#use-threads The number of threads for     
                        parallel file-loading         
-user=user_name,user        MySQL user name to use when   
                        connecting to server          
-verbose                Verbose mode                  
-version                Display version information   
                        and exit                      

   *  `--help', `-?'

     Display a help message and exit.

   *  `--bind-address=IP_ADDRESS'

     On a computer having multiple network interfaces, this option can
     be used to select which interface is employed when connecting to
     the MySQL server.

     This option is supported only in the version of *Note
     `mysqlimport': mysqlimport. that is supplied with MySQL Cluster.
     It is not available in standard MySQL Server 5.5 releases.

   *  `--character-sets-dir=PATH'

     The directory where character sets are installed. See *Note
     charset-configuration::.

   *  `--columns=COLUMN_LIST', `-c COLUMN_LIST'

     This option takes a comma-separated list of column names as its
     value. The order of the column names indicates how to match data
     file columns with table columns.

   *  `--compress', `-C'

     Compress all information sent between the client and the server if
     both support compression.

   *  `--debug[=DEBUG_OPTIONS]', `-# [DEBUG_OPTIONS]'

     Write a debugging log. A typical DEBUG_OPTIONS string is
     `'d:t:o,FILE_NAME''.  The default is `'d:t:o''.

   *  `--debug-check'

     Print some debugging information when the program exits.

   *  `--debug-info'

     Print debugging information and memory and CPU usage statistics
     when the program exits.

   *  `--default-character-set=CHARSET_NAME'

     Use CHARSET_NAME as the default character set. See *Note
     charset-configuration::.

   *  `--default-auth=PLUGIN'

     The client-side authentication plugin to use. See *Note
     pluggable-authentication::.

     This option was added in MySQL 5.5.10.

   *  `--delete', `-D'

     Empty the table before importing the text file.

   *  `--fields-terminated-by=...',

     `--fields-enclosed-by=...',

     `--fields-optionally-enclosed-by=...',

     `--fields-escaped-by=...'

     These options have the same meaning as the corresponding clauses
     for *Note `LOAD DATA INFILE': load-data. See *Note load-data::.

   *  `--force', `-f'

     Ignore errors. For example, if a table for a text file does not
     exist, continue processing any remaining files. Without `--force',
     *Note `mysqlimport': mysqlimport. exits if a table does not exist.

   *  `--host=HOST_NAME', `-h HOST_NAME'

     Import data to the MySQL server on the given host. The default
     host is `localhost'.

   *  `--ignore', `-i'

     See the description for the `--replace' option.

   *  `--ignore-lines=N'

     Ignore the first N lines of the data file.

   *  `--lines-terminated-by=...'

     This option has the same meaning as the corresponding clause for
     *Note `LOAD DATA INFILE': load-data. For example, to import
     Windows files that have lines terminated with carriage
     return/linefeed pairs, use `--lines-terminated-by="\r\n"'.  (You
     might have to double the backslashes, depending on the escaping
     conventions of your command interpreter.) See *Note load-data::.

   *  `--local', `-L'

     Read input files locally from the client host.

   *  `--lock-tables', `-l'

     Lock _all_ tables for writing before processing any text files.
     This ensures that all tables are synchronized on the server.

   *  `--low-priority'

     Use `LOW_PRIORITY' when loading the table.  This affects only
     storage engines that use only table-level locking (such as
     `MyISAM', `MEMORY', and `MERGE').

   *  `--password[=PASSWORD]', `-p[PASSWORD]'

     The password to use when connecting to the server. If you use the
     short option form (`-p'), you _cannot_ have a space between the
     option and the password. If you omit the PASSWORD value following
     the `--password' or `-p' option on the command line, *Note
     `mysqlimport': mysqlimport. prompts for one.

     Specifying a password on the command line should be considered
     insecure. See *Note password-security-user::. You can use an
     option file to avoid giving the password on the command line.

   *  `--pipe', `-W'

     On Windows, connect to the server using a named pipe. This option
     applies only if the server supports named-pipe connections.

   *  `--plugin-dir=PATH'

     The directory in which to look for plugins. It may be necessary to
     specify this option if the `--default-auth' option is used to
     specify an authentication plugin but *Note `mysqlimport':
     mysqlimport. does not find it. See *Note
     pluggable-authentication::.

     This option was added in MySQL 5.5.10.

   *  `--port=PORT_NUM', `-P PORT_NUM'

     The TCP/IP port number to use for the connection.

   *  `--protocol={TCP|SOCKET|PIPE|MEMORY}'

     The connection protocol to use for connecting to the server.  It
     is useful when the other connection parameters normally would
     cause a protocol to be used other than the one you want. For
     details on the permissible values, see *Note connecting::.

   *  `--replace', `-r'

     The `--replace' and `--ignore' options control handling of input
     rows that duplicate existing rows on unique key values. If you
     specify `--replace', new rows replace existing rows that have the
     same unique key value.  If you specify `--ignore', input rows that
     duplicate an existing row on a unique key value are skipped. If
     you do not specify either option, an error occurs when a duplicate
     key value is found, and the rest of the text file is ignored.

   *  `--silent', `-s'

     Silent mode. Produce output only when errors occur.

   *  `--socket=PATH', `-S PATH'

     For connections to `localhost', the Unix socket file to use, or,
     on Windows, the name of the named pipe to use.

   *  `--ssl*'

     Options that begin with `--ssl' specify whether to connect to the
     server using SSL and indicate where to find SSL keys and
     certificates. See *Note ssl-options::.

   *  `--user=USER_NAME', `-u USER_NAME'

     The MySQL user name to use when connecting to the server.

   *  `--use-threads=N'

     Load files in parallel using N threads.

   *  `--verbose', `-v'

     Verbose mode. Print more information about what the program does.

   *  `--version', `-V'

     Display version information and exit.

Here is a sample session that demonstrates use of *Note `mysqlimport':
mysqlimport.:

     shell> mysql -e 'CREATE TABLE imptest(id INT, n VARCHAR(30))' test
     shell> ed
     a
     100     Max Sydow
     101     Count Dracula
     .
     w imptest.txt
     32
     q
     shell> od -c imptest.txt
     0000000   1   0   0  \t   M   a   x       S   y   d   o   w  \n   1   0
     0000020   1  \t   C   o   u   n   t       D   r   a   c   u   l   a  \n
     0000040
     shell> mysqlimport --local test imptest.txt
     test.imptest: Records: 2  Deleted: 0  Skipped: 0  Warnings: 0
     shell> mysql -e 'SELECT * FROM imptest' test
     +------+---------------+
     | id   | n             |
     +------+---------------+
     |  100 | Max Sydow     |
     |  101 | Count Dracula |
     +------+---------------+


File: manual.info,  Node: mysqlshow,  Next: mysqlslap,  Prev: mysqlimport,  Up: programs-client

4.5.6 `mysqlshow' -- Display Database, Table, and Column Information
--------------------------------------------------------------------

The *Note `mysqlshow': mysqlshow. client can be used to quickly see
which databases exist, their tables, or a table's columns or indexes.

*Note `mysqlshow': mysqlshow. provides a command-line interface to
several SQL *Note `SHOW': show. statements.  See *Note show::. The same
information can be obtained by using those statements directly. For
example, you can issue them from the *Note `mysql': mysql. client
program.

Invoke *Note `mysqlshow': mysqlshow. like this:

     shell> mysqlshow [OPTIONS] [DB_NAME [TBL_NAME [COL_NAME]]]

   * If no database is given, a list of database names is shown.

   * If no table is given, all matching tables in the database are
     shown.

   * If no column is given, all matching columns and column types in
     the table are shown.

The output displays only the names of those databases, tables, or
columns for which you have some privileges.

If the last argument contains shell or SQL wildcard characters (``*'',
``?'', ``%'', or ``_''), only those names that are matched by the
wildcard are shown. If a database name contains any underscores, those
should be escaped with a backslash (some Unix shells require two) to
get a list of the proper tables or columns. ``*'' and ``?'' characters
are converted into SQL ``%'' and ``_'' wildcard characters. This might
cause some confusion when you try to display the columns for a table
with a ``_'' in the name, because in this case, *Note `mysqlshow':
mysqlshow. shows you only the table names that match the pattern. This
is easily fixed by adding an extra ``%'' last on the command line as a
separate argument.

*Note `mysqlshow': mysqlshow. supports the following options, which can
be specified on the command line or in the `[mysqlshow]' and `[client]'
groups of an option file. *Note `mysqlshow': mysqlshow. also supports
the options for processing option files described at *Note
option-file-options::.

*`mysqlshow' Options*

Format      Option File Description                   Introduced
-bind-address=ip_addressbind-addressUse the specified network     5.5.8
                        interface to connect to the   
                        MySQL Server                  
-compress   compress    Compress all information      
                        sent between the client and   
                        the server                    
-count      count       Show the number of rows per   
                        table                         
-debug[=debug_options]debug       Write a debugging log         
-debug-checkdebug-check Print debugging information   
                        when the program exits        
-debug-info debug-info  Print debugging information,  
                        memory and CPU statistics     
                        when the program exits        
-default-auth=plugindefault-auth=pluginThe authentication plugin to  5.5.10
                        use                           
-default-character-set=charset_namedefault-character-setUse charset_name as the       
                        default character set         
-help                   Display help message and exit 
-host=host_namehost        Connect to the MySQL server   
                        on the given host             
-keys       keys        Show table indexes            
-password[=password]password    The password to use when      
                        connecting to the server      
-pipe                   On Windows, connect to        
                        server using a named pipe     
-plugin-dir=pathplugin-dir=pathThe directory where plugins   5.5.10
                        are located                   
-port=port_numport        The TCP/IP port number to     
                        use for the connection        
-protocol=typeprotocol    The connection protocol to    
                        use                           
-show-table-type            Show a column indicating the  
                        table type                    
-socket=pathsocket      For connections to localhost  
-ssl-ca=file_namessl-ca      The path to a file that       
                        contains a list of trusted    
                        SSL CAs                       
-ssl-capath=dir_namessl-capath  The path to a directory that  
                        contains trusted SSL CA       
                        certificates in PEM format    
-ssl-cert=file_namessl-cert    The name of the SSL           
                        certificate file to use for   
                        establishing a secure         
                        connection                    
-ssl-cipher=cipher_listssl-cipher  A list of allowable ciphers   
                        to use for SSL encryption     
-ssl-key=file_namessl-key     The name of the SSL key file  
                        to use for establishing a     
                        secure connection             
-ssl-verify-server-certssl-verify-server-certThe server's Common Name      
                        value in its certificate is   
                        verified against the host     
                        name used when connecting to  
                        the server                    
-status     status      Display extra information     
                        about each table              
-user=user_name,user        MySQL user name to use when   
                        connecting to server          
-verbose                Verbose mode                  
-version                Display version information   
                        and exit                      

   *  `--help', `-?'

     Display a help message and exit.

   *  `--bind-address=IP_ADDRESS'

     On a computer having multiple network interfaces, this option can
     be used to select which interface is employed when connecting to
     the MySQL server.

     This option is supported only in the version of *Note `mysqlshow':
     mysqlshow. that is supplied with MySQL Cluster. It is not
     available in standard MySQL Server 5.5 releases.

   *  `--character-sets-dir=PATH'

     The directory where character sets are installed. See *Note
     charset-configuration::.

   *  `--compress', `-C'

     Compress all information sent between the client and the server if
     both support compression.

   *  `--count'

     Show the number of rows per table. This can be slow for
     non-`MyISAM' tables.

   *  `--debug[=DEBUG_OPTIONS]', `-# [DEBUG_OPTIONS]'

     Write a debugging log. A typical DEBUG_OPTIONS string is
     `'d:t:o,FILE_NAME''.  The default is `'d:t:o''.

   *  `--debug-check'

     Print some debugging information when the program exits.

   *  `--debug-info'

     Print debugging information and memory and CPU usage statistics
     when the program exits.

   *  `--default-character-set=CHARSET_NAME'

     Use CHARSET_NAME as the default character set. See *Note
     charset-configuration::.

   *  `--default-auth=PLUGIN'

     The client-side authentication plugin to use. See *Note
     pluggable-authentication::.

     This option was added in MySQL 5.5.10.

   *  `--host=HOST_NAME', `-h HOST_NAME'

     Connect to the MySQL server on the given host.

   *  `--keys', `-k'

     Show table indexes.

   *  `--password[=PASSWORD]', `-p[PASSWORD]'

     The password to use when connecting to the server. If you use the
     short option form (`-p'), you _cannot_ have a space between the
     option and the password. If you omit the PASSWORD value following
     the `--password' or `-p' option on the command line, *Note
     `mysqlshow': mysqlshow. prompts for one.

     Specifying a password on the command line should be considered
     insecure. See *Note password-security-user::. You can use an
     option file to avoid giving the password on the command line.

   *  `--pipe', `-W'

     On Windows, connect to the server using a named pipe. This option
     applies only if the server supports named-pipe connections.

   *  `--plugin-dir=PATH'

     The directory in which to look for plugins. It may be necessary to
     specify this option if the `--default-auth' option is used to
     specify an authentication plugin but *Note `mysqlshow': mysqlshow.
     does not find it. See *Note pluggable-authentication::.

     This option was added in MySQL 5.5.10.

   *  `--port=PORT_NUM', `-P PORT_NUM'

     The TCP/IP port number to use for the connection.

   *  `--protocol={TCP|SOCKET|PIPE|MEMORY}'

     The connection protocol to use for connecting to the server.  It
     is useful when the other connection parameters normally would
     cause a protocol to be used other than the one you want. For
     details on the permissible values, see *Note connecting::.

   *  `--show-table-type', `-t'

     Show a column indicating the table type, as in *Note `SHOW FULL
     TABLES': show-tables. The type is `BASE TABLE' or `VIEW'.

   *  `--socket=PATH', `-S PATH'

     For connections to `localhost', the Unix socket file to use, or,
     on Windows, the name of the named pipe to use.

   *  `--ssl*'

     Options that begin with `--ssl' specify whether to connect to the
     server using SSL and indicate where to find SSL keys and
     certificates. See *Note ssl-options::.

   *  `--status', `-i'

     Display extra information about each table.

   *  `--user=USER_NAME', `-u USER_NAME'

     The MySQL user name to use when connecting to the server.

   *  `--verbose', `-v'

     Verbose mode. Print more information about what the program does.
     This option can be used multiple times to increase the amount of
     information.

   *  `--version', `-V'

     Display version information and exit.


File: manual.info,  Node: mysqlslap,  Prev: mysqlshow,  Up: programs-client

4.5.7 `mysqlslap' -- Load Emulation Client
------------------------------------------

*Note `mysqlslap': mysqlslap. is a diagnostic program designed to
emulate client load for a MySQL server and to report the timing of each
stage. It works as if multiple clients are accessing the server.

Invoke *Note `mysqlslap': mysqlslap. like this:

     shell> mysqlslap [OPTIONS]

Some options such as `--create' or `--query' enable you to specify a
string containing an SQL statement or a file containing statements. If
you specify a file, by default it must contain one statement per line.
(That is, the implicit statement delimiter is the newline character.)
Use the `--delimiter' option to specify a different delimiter, which
enables you to specify statements that span multiple lines or place
multiple statements on a single line. You cannot include comments in a
file; *Note `mysqlslap': mysqlslap. does not understand them.

*Note `mysqlslap': mysqlslap. runs in three stages:

  1. Create schema, table, and optionally any stored programs or data
     to use for the test. This stage uses a single client connection.

  2. Run the load test. This stage can use many client connections.

  3. Clean up (disconnect, drop table if specified). This stage uses a
     single client connection.

Examples:

Supply your own create and query SQL statements, with 50 clients
querying and 200 selects for each (enter the command on a single line):

     mysqlslap --delimiter=";"
       --create="CREATE TABLE a (b int);INSERT INTO a VALUES (23)"
       --query="SELECT * FROM a" --concurrency=50 --iterations=200

Let *Note `mysqlslap': mysqlslap. build the query SQL statement with a
table of two *Note `INT': integer-types. columns and three *Note
`VARCHAR': char. columns. Use five clients querying 20 times each. Do
not create the table or insert the data (that is, use the previous
test's schema and data):

     mysqlslap --concurrency=5 --iterations=20
       --number-int-cols=2 --number-char-cols=3
       --auto-generate-sql

Tell the program to load the create, insert, and query SQL statements
from the specified files, where the `create.sql' file has multiple
table creation statements delimited by `';'' and multiple insert
statements delimited by `';''. The `--query' file will have multiple
queries delimited by `';''. Run all the load statements, then run all
the queries in the query file with five clients (five times each):

     mysqlslap --concurrency=5
       --iterations=5 --query=query.sql --create=create.sql
       --delimiter=";"

*Note `mysqlslap': mysqlslap. supports the following options, which can
be specified on the command line or in the `[mysqlslap]' and `[client]'
groups of an option file. *Note `mysqlslap': mysqlslap. also supports
the options for processing option files described at *Note
option-file-options::.

*`mysqlslap' Options*

Format      Option File Description                   Introduced
-auto-generate-sqlauto-generate-sqlGenerate SQL statements       
                        automatically when they are   
                        not supplied in files or      
                        using command options         
-auto-generate-sql-add-autoincrementauto-generate-sql-add-autoincrementAdd AUTO_INCREMENT column to  
                        automatically generated       
                        tables                        
-auto-generate-sql-execute-number=#auto-generate-sql-execute-numberSpecify how many queries to   
                        generate automatically        
-auto-generate-sql-guid-primaryauto-generate-sql-guid-primaryAdd a GUID-based primary key  
                        to automatically generated    
                        tables                        
-auto-generate-sql-load-type=typeauto-generate-sql-load-typeSpecify how many queries to   
                        generate automatically        
-auto-generate-sql-secondary-indexes=#auto-generate-sql-secondary-indexesSpecify how many secondary    
                        indexes to add to             
                        automatically generated       
                        tables                        
-auto-generate-sql-unique-query-number=#auto-generate-sql-unique-query-numberHow many different queries    
                        to generate for automatic     
                        tests.                        
-auto-generate-sql-unique-write-number=#auto-generate-sql-unique-write-numberHow many different queries    
                        to generate for               
                        -auto-generate-sql-write-number
-auto-generate-sql-write-number=#auto-generate-sql-write-numberHow many row inserts to       
                        perform on each thread        
-commit=#   commit      How many statements to        
                        execute before committing.    
-compress   compress    Compress all information      
                        sent between the client and   
                        the server                    
-concurrency=#concurrency The number of clients to      
                        simulate when issuing the     
                        SELECT statement              
-create=valuecreate      The file or string            
                        containing the statement to   
                        use for creating the table    
-create-schema=valuecreate-schemaThe schema in which to run    
                        the tests                     
-csv=[file] csv         Generate output in            
                        comma-separated values format 
-debug[=debug_options]debug       Write a debugging log         
-debug-checkdebug-check Print debugging information   
                        when the program exits        
-debug-info debug-info  Print debugging information,  
                        memory and CPU statistics     
                        when the program exits        
-default-auth=plugindefault-auth=pluginThe authentication plugin to  5.5.10
                        use                           
-delimiter=strdelimiter   The delimiter to use in SQL   
                        statements                    
-detach=#   detach      Detach (close and reopen)     
                        each connection after each N  
                        statements                    
-enable-cleartext-pluginenable-cleartext-pluginEnable cleartext              5.5.27
                        authentication plugin         
-engine=engine_nameengine      The storage engine to use     
                        for creating the table        
-help                   Display help message and exit 
-host=host_namehost        Connect to the MySQL server   
                        on the given host             
-iterations=#iterations  The number of times to run    
                        the tests                     
-no-drop    no-drop     Do not drop any schema        5.5.12
                        created during the test run   
-number-char-cols=#number-char-colsThe number of VARCHAR         
                        columns to use if             
                        -auto-generate-sql is         
                        specified                     
-number-int-cols=#number-int-colsThe number of INT columns to  
                        use if -auto-generate-sql is  
                        specified                     
-number-of-queries=#number-of-queriesLimit each client to          
                        approximately this number of  
                        queries                       
-only-print only-print  Do not connect to databases.  
                        mysqlslap only prints what    
                        it would have done            
-password[=password]password    The password to use when      
                        connecting to the server      
-pipe                   On Windows, connect to        
                        server using a named pipe     
-plugin-dir=pathplugin-dir=pathThe directory where plugins   5.5.10
                        are located                   
-port=port_numport        The TCP/IP port number to     
                        use for the connection        
-post-query=valuepost-query  The file or string            
                        containing the statement to   
                        execute after the tests have  
                        completed                     
-post-system=strpost-system The string to execute using   
                        system() after the tests      
                        have completed                
-pre-query=valuepre-query   The file or string            
                        containing the statement to   
                        execute before running the    
                        tests                         
-pre-system=strpre-system  The string to execute using   
                        system() before running the   
                        tests                         
-protocol=typeprotocol    The connection protocol to    
                        use                           
-query=valuequery       The file or string            
                        containing the SELECT         
                        statement to use for          
                        retrieving data               
-silent     silent      Silent mode                   
-socket=pathsocket      For connections to localhost  
-ssl-ca=file_namessl-ca      The path to a file that       
                        contains a list of trusted    
                        SSL CAs                       
-ssl-capath=dir_namessl-capath  The path to a directory that  
                        contains trusted SSL CA       
                        certificates in PEM format    
-ssl-cert=file_namessl-cert    The name of the SSL           
                        certificate file to use for   
                        establishing a secure         
                        connection                    
-ssl-cipher=cipher_listssl-cipher  A list of allowable ciphers   
                        to use for SSL encryption     
-ssl-key=file_namessl-key     The name of the SSL key file  
                        to use for establishing a     
                        secure connection             
-ssl-verify-server-certssl-verify-server-certThe server's Common Name      
                        value in its certificate is   
                        verified against the host     
                        name used when connecting to  
                        the server                    
-user=user_name,user        MySQL user name to use when   
                        connecting to server          
-verbose                Verbose mode                  
-version                Display version information   
                        and exit                      

   *  `--help', `-?'

     Display a help message and exit.

   *  `--auto-generate-sql', `-a'

     Generate SQL statements automatically when they are not supplied
     in files or using command options.

   *  `--auto-generate-sql-add-autoincrement'

     Add an `AUTO_INCREMENT' column to automatically generated tables.

   *  `--auto-generate-sql-execute-number=N'

     Specify how many queries to generate automatically.

   *  `--auto-generate-sql-guid-primary'

     Add a GUID-based primary key to automatically generated tables.

   *  `--auto-generate-sql-load-type=TYPE'

     Specify the test load type. The permissible values are `read'
     (scan tables), `write' (insert into tables), `key' (read primary
     keys), `update' (update primary keys), or `mixed' (half inserts,
     half scanning selects). The default is `mixed'.

   *  `--auto-generate-sql-secondary-indexes=N'

     Specify how many secondary indexes to add to automatically
     generated tables. By default, none are added.

   *  `--auto-generate-sql-unique-query-number=N'

     How many different queries to generate for automatic tests.  For
     example, if you run a `key' test that performs 1000 selects, you
     can use this option with a value of 1000 to run 1000 unique
     queries, or with a value of 50 to perform 50 different selects.
     The default is 10.

   *  `--auto-generate-sql-unique-write-number=N'

     How many different queries to generate for
     `--auto-generate-sql-write-number'.  The default is 10.

   *  `--auto-generate-sql-write-number=N'

     How many row inserts to perform on each thread. The default is 100.

   *  `--commit=N'

     How many statements to execute before committing. The default is 0
     (no commits are done).

   *  `--compress', `-C'

     Compress all information sent between the client and the server if
     both support compression.

   *  `--concurrency=N', `-c N'

     The number of clients to simulate when issuing the *Note `SELECT':
     select. statement.

   *  `--create=VALUE'

     The file or string containing the statement to use for creating
     the table.

   *  `--create-schema=VALUE'

     The schema in which to run the tests.

     *Note*:

     If the `--auto-generate-sql' option is also given, *Note
     `mysqlslap': mysqlslap. drops the schema at the end of the test
     run. To avoid this, use the `--no-drop' option as well.

   *  `--csv[=FILE_NAME]'

     Generate output in comma-separated values format. The output goes
     to the named file, or to the standard output if no file is given.

   *  `--debug[=DEBUG_OPTIONS]', `-# [DEBUG_OPTIONS]'

     Write a debugging log. A typical DEBUG_OPTIONS string is
     `'d:t:o,FILE_NAME''.  The default is
     `'d:t:o,/tmp/mysqlslap.trace''.

   *  `--debug-check'

     Print some debugging information when the program exits.

   *  `--debug-info', `-T'

     Print debugging information and memory and CPU usage statistics
     when the program exits.

   *  `--default-auth=PLUGIN'

     The client-side authentication plugin to use. See *Note
     pluggable-authentication::.

     This option was added in MySQL 5.5.10.

   *  `--delimiter=STR', `-F STR'

     The delimiter to use in SQL statements supplied in files or using
     command options.

   *  `--detach=N'

     Detach (close and reopen) each connection after each N statements.
     The default is 0 (connections are not detached).

   *  `--enable-cleartext-plugin'

     Enable the `mysql_clear_password' cleartext authentication plugin.
     (See *Note cleartext-authentication-plugin::.) This option was
     added in MySQL 5.5.27.

   *  `--engine=ENGINE_NAME', `-e ENGINE_NAME'

     The storage engine to use for creating tables.

   *  `--host=HOST_NAME', `-h HOST_NAME'

     Connect to the MySQL server on the given host.

   *  `--iterations=N', `-i N'

     The number of times to run the tests.

   *  `--no-drop'

     Prevent *Note `mysqlslap': mysqlslap. from dropping any schema it
     creates during the test run. This option was added in MySQL 5.5.12.

   *  `--number-char-cols=N', `-x N'

     The number of *Note `VARCHAR': char. columns to use if
     `--auto-generate-sql' is specified.

   *  `--number-int-cols=N', `-y N'

     The number of *Note `INT': integer-types. columns to use if
     `--auto-generate-sql' is specified.

   *  `--number-of-queries=N'

     Limit each client to approximately this many queries. Query
     counting takes into account the statement delimiter. For example,
     if you invoke *Note `mysqlslap': mysqlslap. as follows, the `;'
     delimiter is recognized so that each instance of the query string
     counts as two queries. As a result, 5 rows (not 10) are inserted.

          shell> mysqlslap --delimiter=";" --number-of-queries=10
                   --query="use test;insert into t values(null)"

   *  `--only-print'

     Do not connect to databases. *Note `mysqlslap': mysqlslap.  only
     prints what it would have done.

   *  `--password[=PASSWORD]', `-p[PASSWORD]'

     The password to use when connecting to the server. If you use the
     short option form (`-p'), you _cannot_ have a space between the
     option and the password. If you omit the PASSWORD value following
     the `--password' or `-p' option on the command line, *Note
     `mysqlslap': mysqlslap. prompts for one.

     Specifying a password on the command line should be considered
     insecure. See *Note password-security-user::. You can use an
     option file to avoid giving the password on the command line.

   *  `--pipe', `-W'

     On Windows, connect to the server using a named pipe. This option
     applies only if the server supports named-pipe connections.

   *  `--plugin-dir=PATH'

     The directory in which to look for plugins. It may be necessary to
     specify this option if the `--default-auth' option is used to
     specify an authentication plugin but *Note `mysqlslap': mysqlslap.
     does not find it. See *Note pluggable-authentication::.

     This option was added in MySQL 5.5.10.

   *  `--port=PORT_NUM', `-P PORT_NUM'

     The TCP/IP port number to use for the connection.

   *  `--post-query=VALUE'

     The file or string containing the statement to execute after the
     tests have completed. This execution is not counted for timing
     purposes.

   *  `--shared-memory-base-name=NAME'

     On Windows, the shared-memory name to use, for connections made
     using shared memory to a local server. This option applies only if
     the server supports shared-memory connections.

   *  `--post-system=STR'

     The string to execute using `system()' after the tests have
     completed. This execution is not counted for timing purposes.

   *  `--pre-query=VALUE'

     The file or string containing the statement to execute before
     running the tests. This execution is not counted for timing
     purposes.

   *  `--pre-system=STR'

     The string to execute using `system()' before running the tests.
     This execution is not counted for timing purposes.

   *  `--protocol={TCP|SOCKET|PIPE|MEMORY}'

     The connection protocol to use for connecting to the server.  It
     is useful when the other connection parameters normally would
     cause a protocol to be used other than the one you want. For
     details on the permissible values, see *Note connecting::.

   *  `--query=VALUE', `-q VALUE'

     The file or string containing the *Note `SELECT': select.
     statement to use for retrieving data.

   *  `--silent', `-s'

     Silent mode. No output.

   *  `--socket=PATH', `-S PATH'

     For connections to `localhost', the Unix socket file to use, or,
     on Windows, the name of the named pipe to use.

   *  `--ssl*'

     Options that begin with `--ssl' specify whether to connect to the
     server using SSL and indicate where to find SSL keys and
     certificates. See *Note ssl-options::.

   *  `--user=USER_NAME', `-u USER_NAME'

     The MySQL user name to use when connecting to the server.

   *  `--verbose', `-v'

     Verbose mode. Print more information about what the program does.
     This option can be used multiple times to increase the amount of
     information.

   *  `--version', `-V'

     Display version information and exit.


File: manual.info,  Node: programs-admin-utils,  Next: programs-development,  Prev: programs-client,  Up: programs

4.6 MySQL Administrative and Utility Programs
=============================================

* Menu:

* innochecksum::                 `innochecksum' --- Offline InnoDB File Checksum Utility
* myisam-ftdump::                `myisam_ftdump' --- Display Full-Text Index information
* myisamchk::                    `myisamchk' --- MyISAM Table-Maintenance Utility
* myisamlog::                    `myisamlog' --- Display MyISAM Log File Contents
* myisampack::                   `myisampack' --- Generate Compressed, Read-Only MyISAM Tables
* mysqlaccess::                  `mysqlaccess' --- Client for Checking Access Privileges
* mysqlbinlog::                  `mysqlbinlog' --- Utility for Processing Binary Log Files
* mysqldumpslow::                `mysqldumpslow' --- Summarize Slow Query Log Files
* mysqlhotcopy::                 `mysqlhotcopy' --- A Database Backup Program
* mysql-convert-table-format::   `mysql_convert_table_format' --- Convert Tables to Use a Given Storage Engine
* mysql-find-rows::              `mysql_find_rows' --- Extract SQL Statements from Files
* mysql-fix-extensions::         `mysql_fix_extensions' --- Normalize Table File Name Extensions
* mysql-setpermission::          `mysql_setpermission' --- Interactively Set Permissions in Grant Tables
* mysql-waitpid::                `mysql_waitpid' --- Kill Process and Wait for Its Termination
* mysql-zap::                    `mysql_zap' --- Kill Processes That Match a Pattern

This section describes administrative programs and programs that
perform miscellaneous utility operations.


File: manual.info,  Node: innochecksum,  Next: myisam-ftdump,  Prev: programs-admin-utils,  Up: programs-admin-utils

4.6.1 `innochecksum' -- Offline InnoDB File Checksum Utility
------------------------------------------------------------

*Note `innochecksum': innochecksum. prints checksums for `InnoDB'
files. This tool reads an `InnoDB' tablespace file, calculates the
checksum for each page, compares the calculated checksum to the stored
checksum, and reports mismatches, which indicate damaged pages. It was
originally developed to speed up verifying the integrity of tablespace
files after power outages but can also be used after file copies.
Because checksum mismatches will cause `InnoDB' to deliberately shut
down a running server, it can be preferable to use this tool rather
than waiting for a server in production usage to encounter the damaged
pages.

*Note `innochecksum': innochecksum. cannot be used on tablespace files
that the server already has open. For such files, you should use *Note
`CHECK TABLE': check-table. to check tables within the tablespace.

If checksum mismatches are found, you would normally restore the
tablespace from backup or start the server and attempt to use *Note
`mysqldump': mysqldump. to make a backup of the tables within the
tablespace.

Invoke *Note `innochecksum': innochecksum. like this:

     shell> innochecksum [OPTIONS] FILE_NAME

*Note `innochecksum': innochecksum. supports the following options.
For options that refer to page numbers, the numbers are zero-based.

   *  `-c'

     Print a count of the number of pages in the file.

   *  `-d'

     Debug mode; prints checksums for each page.

   *  `-e NUM'

     End at this page number.

   *  `-p NUM'

     Check only this page number.

   *  `-s NUM'

     Start at this page number.

   *  `-v'

     Verbose mode; print a progress indicator every five seconds.


File: manual.info,  Node: myisam-ftdump,  Next: myisamchk,  Prev: innochecksum,  Up: programs-admin-utils

4.6.2 `myisam_ftdump' -- Display Full-Text Index information
------------------------------------------------------------

*Note `myisam_ftdump': myisam-ftdump. displays information about
`FULLTEXT' indexes in `MyISAM' tables. It reads the `MyISAM' index file
directly, so it must be run on the server host where the table is
located. Before using *Note `myisam_ftdump': myisam-ftdump, be sure to
issue a `FLUSH TABLES' statement first if the server is running.

*Note `myisam_ftdump': myisam-ftdump. scans and dumps the entire index,
which is not particularly fast. On the other hand, the distribution of
words changes infrequently, so it need not be run often.

Invoke *Note `myisam_ftdump': myisam-ftdump. like this:

     shell> myisam_ftdump [OPTIONS] TBL_NAME INDEX_NUM

The TBL_NAME argument should be the name of a `MyISAM' table. You can
also specify a table by naming its index file (the file with the `.MYI'
suffix). If you do not invoke *Note `myisam_ftdump': myisam-ftdump. in
the directory where the table files are located, the table or index
file name must be preceded by the path name to the table's database
directory.  Index numbers begin with 0.

Example: Suppose that the `test' database contains a table named
`mytexttable' that has the following definition:

     CREATE TABLE mytexttable
     (
       id   INT NOT NULL,
       txt  TEXT NOT NULL,
       PRIMARY KEY (id),
       FULLTEXT (txt)
     ) ENGINE=MyISAM;

The index on `id' is index 0 and the `FULLTEXT' index on `txt' is index
1. If your working directory is the `test' database directory, invoke
*Note `myisam_ftdump': myisam-ftdump. as follows:

     shell> myisam_ftdump mytexttable 1

If the path name to the `test' database directory is
`/usr/local/mysql/data/test', you can also specify the table name
argument using that path name. This is useful if you do not invoke
*Note `myisam_ftdump': myisam-ftdump. in the database directory:

     shell> myisam_ftdump /usr/local/mysql/data/test/mytexttable 1

You can use *Note `myisam_ftdump': myisam-ftdump. to generate a list of
index entries in order of frequency of occurrence like this:

     shell> myisam_ftdump -c mytexttable 1 | sort -r

*Note `myisam_ftdump': myisam-ftdump. supports the following options:

   *  `--help', `-h' `-?'

     Display a help message and exit.

   *  `--count', `-c'

     Calculate per-word statistics (counts and global weights).

   *  `--dump', `-d'

     Dump the index, including data offsets and word weights.

   *  `--length', `-l'

     Report the length distribution.

   *  `--stats', `-s'

     Report global index statistics. This is the default operation if
     no other operation is specified.

   *  `--verbose', `-v'

     Verbose mode. Print more output about what the program does.


File: manual.info,  Node: myisamchk,  Next: myisamlog,  Prev: myisam-ftdump,  Up: programs-admin-utils

4.6.3 `myisamchk' -- MyISAM Table-Maintenance Utility
-----------------------------------------------------

* Menu:

* myisamchk-general-options::    `myisamchk' General Options
* myisamchk-check-options::      `myisamchk' Check Options
* myisamchk-repair-options::     `myisamchk' Repair Options
* myisamchk-other-options::      Other `myisamchk' Options
* myisamchk-table-info::         Obtaining Table Information with `myisamchk'
* myisamchk-memory::             `myisamchk' Memory Usage

The *Note `myisamchk': myisamchk. utility gets information about your
database tables or checks, repairs, or optimizes them.  *Note
`myisamchk': myisamchk. works with `MyISAM' tables (tables that have
`.MYD' and `.MYI' files for storing data and indexes).

You can also use the *Note `CHECK TABLE': check-table.  and *Note
`REPAIR TABLE': repair-table. statements to check and repair `MyISAM'
tables. See *Note check-table::, and *Note repair-table::.

The use of *Note `myisamchk': myisamchk. with partitioned tables is not
supported.

*Caution*:

It is best to make a backup of a table before performing a table repair
operation; under some circumstances the operation might cause data
loss. Possible causes include but are not limited to file system errors.

Invoke *Note `myisamchk': myisamchk. like this:

     shell> myisamchk [OPTIONS] TBL_NAME ...

The OPTIONS specify what you want *Note `myisamchk': myisamchk. to do.
They are described in the following sections. You can also get a list
of options by invoking *Note `myisamchk --help': myisamchk.

With no options, *Note `myisamchk': myisamchk. simply checks your table
as the default operation. To get more information or to tell *Note
`myisamchk': myisamchk. to take corrective action, specify options as
described in the following discussion.

TBL_NAME is the database table you want to check or repair. If you run
*Note `myisamchk': myisamchk.  somewhere other than in the database
directory, you must specify the path to the database directory, because
*Note `myisamchk': myisamchk. has no idea where the database is
located. In fact, *Note `myisamchk': myisamchk. does not actually care
whether the files you are working on are located in a database
directory. You can copy the files that correspond to a database table
into some other location and perform recovery operations on them there.

You can name several tables on the *Note `myisamchk': myisamchk.
command line if you wish. You can also specify a table by naming its
index file (the file with the `.MYI' suffix). This enables you to
specify all tables in a directory by using the pattern `*.MYI'. For
example, if you are in a database directory, you can check all the
`MyISAM' tables in that directory like this:

     shell> myisamchk *.MYI

If you are not in the database directory, you can check all the tables
there by specifying the path to the directory:

     shell> myisamchk /PATH/TO/DATABASE_DIR/*.MYI

You can even check all tables in all databases by specifying a wildcard
with the path to the MySQL data directory:

     shell> myisamchk /PATH/TO/DATADIR/*/*.MYI

The recommended way to quickly check all `MyISAM' tables is:

     shell> myisamchk --silent --fast /PATH/TO/DATADIR/*/*.MYI

If you want to check all `MyISAM' tables and repair any that are
corrupted, you can use the following command:

     shell> myisamchk --silent --force --fast --update-state \
               --key_buffer_size=64M --myisam_sort_buffer_size=64M \
               --read_buffer_size=1M --write_buffer_size=1M \
               /PATH/TO/DATADIR/*/*.MYI

This command assumes that you have more than 64MB free. For more
information about memory allocation with *Note `myisamchk': myisamchk,
see *Note myisamchk-memory::.

For additional information about using *Note `myisamchk': myisamchk, see
*Note myisam-table-maintenance::.

*Important*:

_You must ensure that no other program is using the tables while you
are running *Note `myisamchk': myisamchk._. The most effective means of
doing so is to shut down the MySQL server while running *Note
`myisamchk': myisamchk, or to lock all tables that *Note `myisamchk':
myisamchk. is being used on.

Otherwise, when you run *Note `myisamchk': myisamchk, it may display
the following error message:

     warning: clients are using or haven't closed the table properly

This means that you are trying to check a table that has been updated
by another program (such as the *Note `mysqld': mysqld. server) that
hasn't yet closed the file or that has died without closing the file
properly, which can sometimes lead to the corruption of one or more
`MyISAM' tables.

If *Note `mysqld': mysqld. is running, you must force it to flush any
table modifications that are still buffered in memory by using *Note
`FLUSH TABLES': flush. You should then ensure that no one is using the
tables while you are running *Note `myisamchk': myisamchk.

However, the easiest way to avoid this problem is to use *Note `CHECK
TABLE': check-table. instead of *Note `myisamchk': myisamchk. to check
tables. See *Note check-table::.

*Note `myisamchk': myisamchk. supports the following options, which can
be specified on the command line or in the `[myisamchk]' group of an
option file.  *Note `myisamchk': myisamchk. also supports the options
for processing option files described at *Note option-file-options::.

*`myisamchk' Options*

Format      Option File Description                   IntroducedDeprecated
-analyze    analyze     Analyze the distribution of           
                        key values                            
-backup     backup      Make a backup of the .MYD             
                        file as file_name-time.BAK            
-block-search=offsetblock-searchFind the record that a block          
                        at the given offset belongs           
                        to                                    
-check      check       Check the table for errors            
-check-only-changedcheck-only-changedCheck only tables that have           
                        changed since the last check          
-correct-checksumcorrect-checksumCorrect the checksum                  
                        information for the table             
-data-file-length=lendata-file-lengthMaximum length of the data            
                        file (when re-creating data           
                        file when it is full)                 
-debug[=debug_options]debug       Write a debugging log                 
decode_bits=#decode_bits Decode_bits                           
-descriptiondescription Print some descriptive                
                        information about the table           
-extend-checkextend-checkDo very thorough table check          
                        or repair that tries to               
                        recover every possible row            
                        from the data file                    
-fast       fast        Check only tables that                
                        haven't been closed properly          
-force      force       Do a repair operation                 
                        automatically if myisamchk            
                        finds any errors in the table         
-force      force-recoverOverwrite old temporary               
                        files. For use with the -r            
                        or -o option                          
ft_max_word_len=#ft_max_word_lenMaximum word length for               
                        FULLTEXT indexes                      
ft_min_word_len=#ft_min_word_lenMinimum word length for               
                        FULLTEXT indexes                      
ft_stopword_file=valueft_stopword_fileUse stopwords from this file          
                        instead of built-in list              
-HELP                   Display help message and exit         
-help                   Display help message and exit         
-informationinformation Print informational                   
                        statistics about the table            
                        that is checked                       
key_buffer_size=#key_buffer_sizeThe size of the buffer used           
                        for index blocks for MyISAM           
                        tables                                
-keys-used=valkeys-used   A bit-value that indicates            
                        which indexes to update               
-max-record-length=lenmax-record-lengthSkip rows larger than the             
                        given length if myisamchk             
                        cannot allocate memory to             
                        hold them                             
-medium-checkmedium-checkDo a check that is faster             
                        than an -extend-check                 
                        operation                             
myisam_block_size=#myisam_block_sizeBlock size to be used for             
                        MyISAM index pages                    
myisam_sort_buffer_size=#myisam_sort_buffer_sizeThe buffer that is allocated  5.5.29  
                        when sorting the index when           
                        doing a REPAIR or when                
                        creating indexes with CREATE          
                        INDEX or ALTER TABLE                  
-parallel-recoverparallel-recoverUses the same technique as            
                        -r and -n, but creates all            
                        the keys in parallel, using           
                        different threads (beta)              
-quick      quick       Achieve a faster repair by            
                        not modifying the data file.          
read_buffer_size=#read_buffer_sizeEach thread that does a               
                        sequential scan allocates a           
                        buffer of this size for each          
                        table it scans                        
-read-only  read-only   Don't mark the table as               
                        checked                               
-recover    recover     Do a repair that can fix              
                        almost any problem except             
                        unique keys that aren't               
                        unique                                
-safe-recoversafe-recoverDo a repair using an old              
                        recovery method that reads            
                        through all rows in order             
                        and updates all index trees           
                        based on the rows found               
-set-auto-increment[=value]set-auto-incrementForce AUTO_INCREMENT                  
                        numbering for new records to          
                        start at the given value              
-set-collation=nameset-collationSpecify the collation to use          
                        for sorting table indexes             
-silent     silent      Silent mode                           
sort_buffer_size=#sort_buffer_sizeThe buffer that is allocated          5.5.29
                        when sorting the index when           
                        doing a REPAIR or when                
                        creating indexes with CREATE          
                        INDEX or ALTER TABLE                  
-sort-index sort-index  Sort the index tree blocks            
                        in high-low order                     
sort_key_blocks=#sort_key_blockssort_key_blocks                       
-sort-records=#sort-recordsSort records according to a           
                        particular index                      
-sort-recoversort-recoverForce myisamchk to use                
                        sorting to resolve the keys           
                        even if the temporary files           
                        would be very large                   
stats_method=valuestats_methodSpecifies how MyISAM index            
                        statistics collection code            
                        should treat NULLs                    
-tmpdir=pathtmpdir      Path of the directory to be           
                        used for storing temporary            
                        files                                 
-unpack     unpack      Unpack a table that was               
                        packed with myisampack                
-update-stateupdate-stateStore information in the              
                        .MYI file to indicate when            
                        the table was checked and             
                        whether the table crashed             
-verbose                Verbose mode                          
-version                Display version information           
                        and exit                              
write_buffer_size=#write_buffer_sizeWrite buffer size                     


File: manual.info,  Node: myisamchk-general-options,  Next: myisamchk-check-options,  Prev: myisamchk,  Up: myisamchk

4.6.3.1 `myisamchk' General Options
...................................

The options described in this section can be used for any type of table
maintenance operation performed by *Note `myisamchk': myisamchk. The
sections following this one describe options that pertain only to
specific operations, such as table checking or repairing.

   *  `--help', `-?'

     Display a help message and exit. Options are grouped by type of
     operation.

   *  `--HELP', `-H'

     Display a help message and exit. Options are presented in a single
     list.

   *  `--debug=DEBUG_OPTIONS', `-# DEBUG_OPTIONS'

     Write a debugging log. A typical DEBUG_OPTIONS string is
     `'d:t:o,FILE_NAME''.  The default is
     `'d:t:o,/tmp/myisamchk.trace''.

   *  `--silent', `-s'

     Silent mode. Write output only when errors occur. You can use `-s'
     twice (`-ss') to make *Note `myisamchk': myisamchk. very silent.

   *  `--verbose', `-v'

     Verbose mode. Print more information about what the program does.
     This can be used with `-d' and `-e'. Use `-v' multiple times
     (`-vv', `-vvv') for even more output.

   *  `--version', `-V'

     Display version information and exit.

   *  `--wait', `-w'

     Instead of terminating with an error if the table is locked, wait
     until the table is unlocked before continuing. If you are running
     *Note `mysqld': mysqld. with external locking disabled, the table
     can be locked only by another *Note `myisamchk': myisamchk.
     command.

You can also set the following variables by using `--VAR_NAME=VALUE'
syntax:

This table lists *Note `myisamchk': myisamchk.  variables that can be
set using `--VAR_NAME=VALUE' syntax. The table also provides the
default value for each variable.

Variable                  Default Value
`decode_bits'             9
`ft_max_word_len'         version-dependent
`ft_min_word_len'         4
`ft_stopword_file'        built-in list
`key_buffer_size'         523264
`myisam_block_size'       1024
`myisam_sort_key_blocks'  16
`read_buffer_size'        262136
`sort_buffer_size'        2097144
`sort_key_blocks'         16
`stats_method'            nulls_unequal
`write_buffer_size'       262136

The possible *Note `myisamchk': myisamchk. variables and their default
values can be examined with *Note `myisamchk --help': myisamchk.:

`sort_buffer_size' is used when the keys are repaired by sorting keys,
which is the normal case when you use `--recover'. As of MySQL 5.5.29,
`myisam_sort_buffer_size' is available as an alternative name to
`sort_buffer_size'.  `myisam_sort_buffer_size' is preferable to
`sort_buffer_size' because its name corresponds to the
`myisam_sort_buffer_size' server system variable that has a similar
meaning.  `sort_buffer_size' should be considered deprecated.

`key_buffer_size' is used when you are checking the table with
`--extend-check' or when the keys are repaired by inserting keys row by
row into the table (like when doing normal inserts). Repairing through
the key buffer is used in the following cases:

   * You use `--safe-recover'.

   * The temporary files needed to sort the keys would be more than
     twice as big as when creating the key file directly.  This is
     often the case when you have large key values for *Note `CHAR':
     char, *Note `VARCHAR': char, or *Note `TEXT': blob. columns,
     because the sort operation needs to store the complete key values
     as it proceeds. If you have lots of temporary space and you can
     force *Note `myisamchk': myisamchk. to repair by sorting, you can
     use the `--sort-recover' option.

Repairing through the key buffer takes much less disk space than using
sorting, but is also much slower.

If you want a faster repair, set the `key_buffer_size' and
`myisam_sort_buffer_size' variables to about 25% of your available
memory. You can set both variables to large values, because only one of
them is used at a time.

`myisam_block_size' is the size used for index blocks.

`stats_method' influences how `NULL' values are treated for index
statistics collection when the `--analyze' option is given. It acts
like the `myisam_stats_method' system variable. For more information,
see the description of `myisam_stats_method' in *Note
server-system-variables::, and *Note myisam-index-statistics::.

`ft_min_word_len' and `ft_max_word_len' indicate the minimum and
maximum word length for `FULLTEXT' indexes.  `ft_stopword_file' names
the stopword file.  These need to be set under the following
circumstances.

If you use *Note `myisamchk': myisamchk. to perform an operation that
modifies table indexes (such as repair or analyze), the `FULLTEXT'
indexes are rebuilt using the default full-text parameter values for
minimum and maximum word length and the stopword file unless you
specify otherwise. This can result in queries failing.

The problem occurs because these parameters are known only by the
server. They are not stored in `MyISAM' index files. To avoid the
problem if you have modified the minimum or maximum word length or the
stopword file in the server, specify the same `ft_min_word_len',
`ft_max_word_len', and `ft_stopword_file' values to *Note `myisamchk':
myisamchk. that you use for *Note `mysqld': mysqld. For example, if you
have set the minimum word length to 3, you can repair a table with
*Note `myisamchk': myisamchk. like this:

     shell> myisamchk --recover --ft_min_word_len=3 TBL_NAME.MYI

To ensure that *Note `myisamchk': myisamchk. and the server use the
same values for full-text parameters, you can place each one in both
the `[mysqld]' and `[myisamchk]' sections of an option file:

     [mysqld]
     ft_min_word_len=3

     [myisamchk]
     ft_min_word_len=3

An alternative to using *Note `myisamchk': myisamchk. is to use the
*Note `REPAIR TABLE': repair-table, *Note `ANALYZE TABLE':
analyze-table, *Note `OPTIMIZE TABLE': optimize-table, or *Note `ALTER
TABLE': alter-table. These statements are performed by the server,
which knows the proper full-text parameter values to use.


File: manual.info,  Node: myisamchk-check-options,  Next: myisamchk-repair-options,  Prev: myisamchk-general-options,  Up: myisamchk

4.6.3.2 `myisamchk' Check Options
.................................

*Note `myisamchk': myisamchk. supports the following options for table
checking operations:

   *  `--check', `-c'

     Check the table for errors. This is the default operation if you
     specify no option that selects an operation type explicitly.

   *  `--check-only-changed', `-C'

     Check only tables that have changed since the last check.

   *  `--extend-check', `-e'

     Check the table very thoroughly. This is quite slow if the table
     has many indexes. This option should only be used in extreme
     cases. Normally, *Note `myisamchk': myisamchk. or *Note `myisamchk
     --medium-check': myisamchk. should be able to determine whether
     there are any errors in the table.

     If you are using `--extend-check' and have plenty of memory,
     setting the `key_buffer_size' variable to a large value helps the
     repair operation run faster.

     See also the description of this option under table repair options.

     For a description of the output format, see *Note
     myisamchk-table-info::.

   *  `--fast', `-F'

     Check only tables that haven't been closed properly.

   *  `--force', `-f'

     Do a repair operation automatically if *Note `myisamchk':
     myisamchk. finds any errors in the table.  The repair type is the
     same as that specified with the `--recover' or `-r' option.

   *  `--information', `-i'

     Print informational statistics about the table that is checked.

   *  `--medium-check', `-m'

     Do a check that is faster than an `--extend-check' operation.
     This finds only 99.99% of all errors, which should be good enough
     in most cases.

   *  `--read-only', `-T'

     Do not mark the table as checked. This is useful if you use *Note
     `myisamchk': myisamchk. to check a table that is in use by some
     other application that does not use locking, such as *Note
     `mysqld': mysqld. when run with external locking disabled.

   *  `--update-state', `-U'

     Store information in the `.MYI' file to indicate when the table
     was checked and whether the table crashed. This should be used to
     get full benefit of the `--check-only-changed' option, but you
     shouldn't use this option if the *Note `mysqld': mysqld. server is
     using the table and you are running it with external locking
     disabled.


File: manual.info,  Node: myisamchk-repair-options,  Next: myisamchk-other-options,  Prev: myisamchk-check-options,  Up: myisamchk

4.6.3.3 `myisamchk' Repair Options
..................................

*Note `myisamchk': myisamchk. supports the following options for table
repair operations (operations performed when an option such as
`--recover' or `--safe-recover' is given):

   *  `--backup', `-B'

     Make a backup of the `.MYD' file as `FILE_NAME-TIME.BAK'

   *  `--character-sets-dir=PATH'

     The directory where character sets are installed. See *Note
     charset-configuration::.

   *  `--correct-checksum'

     Correct the checksum information for the table.

   *  `--data-file-length=LEN', `-D LEN'

     The maximum length of the data file (when re-creating data file
     when it is `full').

   * `--extend-check', `-e'

     Do a repair that tries to recover every possible row from the data
     file. Normally, this also finds a lot of garbage rows. Do not use
     this option unless you are desperate.

     See also the description of this option under table checking
     options.

     For a description of the output format, see *Note
     myisamchk-table-info::.

   * `--force', `-f'

     Overwrite old intermediate files (files with names like
     `TBL_NAME.TMD') instead of aborting.

   *  `--keys-used=VAL', `-k VAL'

     For *Note `myisamchk': myisamchk, the option value is a bit-value
     that indicates which indexes to update. Each binary bit of the
     option value corresponds to a table index, where the first index
     is bit 0. An option value of 0 disables updates to all indexes,
     which can be used to get faster inserts. Deactivated indexes can
     be reactivated by using *Note `myisamchk -r': myisamchk.

   *  `--no-symlinks', `-l'

     Do not follow symbolic links. Normally *Note `myisamchk':
     myisamchk. repairs the table that a symlink points to. This option
     does not exist as of MySQL 4.0 because versions from 4.0 on do not
     remove symlinks during repair operations.

   *  `--max-record-length=LEN'

     Skip rows larger than the given length if *Note `myisamchk':
     myisamchk. cannot allocate memory to hold them.

   *  `--parallel-recover', `-p'

     Use the same technique as `-r' and `-n', but create all the keys
     in parallel, using different threads. _This is beta-quality code.
     Use at your own risk!_

   *  `--quick', `-q'

     Achieve a faster repair by modifying only the index file, not the
     data file. You can specify this option twice to force *Note
     `myisamchk': myisamchk. to modify the original data file in case
     of duplicate keys.

   *  `--recover', `-r'

     Do a repair that can fix almost any problem except unique keys
     that are not unique (which is an extremely unlikely error with
     `MyISAM' tables). If you want to recover a table, this is the
     option to try first. You should try `--safe-recover' only if *Note
     `myisamchk': myisamchk. reports that the table cannot be recovered
     using `--recover'. (In the unlikely case that `--recover' fails,
     the data file remains intact.)

     If you have lots of memory, you should increase the value of
     `myisam_sort_buffer_size'.

   *  `--safe-recover', `-o'

     Do a repair using an old recovery method that reads through all
     rows in order and updates all index trees based on the rows found.
     This is an order of magnitude slower than `--recover', but can
     handle a couple of very unlikely cases that `--recover' cannot.
     This recovery method also uses much less disk space than
     `--recover'. Normally, you should repair first using `--recover',
     and then with `--safe-recover' only if `--recover' fails.

     If you have lots of memory, you should increase the value of
     `key_buffer_size'.

   *  `--set-character-set=NAME'

     Change the character set used by the table indexes. This option
     was replaced by `--set-collation' in MySQL 5.0.3.

   *  `--set-collation=NAME'

     Specify the collation to use for sorting table indexes. The
     character set name is implied by the first part of the collation
     name.

   *  `--sort-recover', `-n'

     Force *Note `myisamchk': myisamchk. to use sorting to resolve the
     keys even if the temporary files would be very large.

   *  `--tmpdir=PATH', `-t PATH'

     The path of the directory to be used for storing temporary files.
     If this is not set, *Note `myisamchk': myisamchk. uses the value
     of the `TMPDIR' environment variable. `--tmpdir' can be set to a
     list of directory paths that are used successively in round-robin
     fashion for creating temporary files. The separator character
     between directory names is the colon (``:'') on Unix and the
     semicolon (``;'') on Windows.

   *  `--unpack', `-u'

     Unpack a table that was packed with *Note `myisampack': myisampack.


File: manual.info,  Node: myisamchk-other-options,  Next: myisamchk-table-info,  Prev: myisamchk-repair-options,  Up: myisamchk

4.6.3.4 Other `myisamchk' Options
.................................

*Note `myisamchk': myisamchk. supports the following options for
actions other than table checks and repairs:

   *  `--analyze', `-a'

     Analyze the distribution of key values. This improves join
     performance by enabling the join optimizer to better choose the
     order in which to join the tables and which indexes it should use.
     To obtain information about the key distribution, use a *Note
     `myisamchk --description --verbose TBL_NAME': myisamchk.  command
     or the `SHOW INDEX FROM TBL_NAME' statement.

   *  `--block-search=OFFSET', `-b OFFSET'

     Find the record that a block at the given offset belongs to.

   *  `--description', `-d'

     Print some descriptive information about the table.  Specifying
     the `--verbose' option once or twice produces additional
     information. See *Note myisamchk-table-info::.

   *  `--set-auto-increment[=VALUE]', `-A[VALUE]'

     Force `AUTO_INCREMENT' numbering for new records to start at the
     given value (or higher, if there are existing records with
     `AUTO_INCREMENT' values this large). If VALUE is not specified,
     `AUTO_INCREMENT' numbers for new records begin with the largest
     value currently in the table, plus one.

   *  `--sort-index', `-S'

     Sort the index tree blocks in high-low order. This optimizes seeks
     and makes table scans that use indexes faster.

   *  `--sort-records=N', `-R N'

     Sort records according to a particular index. This makes your data
     much more localized and may speed up range-based *Note `SELECT':
     select. and `ORDER BY' operations that use this index. (The first
     time you use this option to sort a table, it may be very slow.)
     To determine a table's index numbers, use *Note `SHOW INDEX':
     show-index, which displays a table's indexes in the same order that
     *Note `myisamchk': myisamchk. sees them. Indexes are numbered
     beginning with 1.

     If keys are not packed (`PACK_KEYS=0'), they have the same length,
     so when *Note `myisamchk': myisamchk. sorts and moves records, it
     just overwrites record offsets in the index. If keys are packed
     (`PACK_KEYS=1'), *Note `myisamchk': myisamchk. must unpack key
     blocks first, then re-create indexes and pack the key blocks
     again. (In this case, re-creating indexes is faster than updating
     offsets for each index.)


File: manual.info,  Node: myisamchk-table-info,  Next: myisamchk-memory,  Prev: myisamchk-other-options,  Up: myisamchk

4.6.3.5 Obtaining Table Information with `myisamchk'
....................................................

To obtain a description of a `MyISAM' table or statistics about it, use
the commands shown here. The output from these commands is explained
later in this section.

   * *Note `myisamchk -d TBL_NAME': myisamchk.

     Runs *Note `myisamchk': myisamchk. in `describe mode' to produce a
     description of your table. If you start the MySQL server with
     external locking disabled, *Note `myisamchk': myisamchk. may
     report an error for a table that is updated while it runs.
     However, because *Note `myisamchk': myisamchk. does not change the
     table in describe mode, there is no risk of destroying data.

   * *Note `myisamchk -dv TBL_NAME': myisamchk.

     Adding `-v' runs *Note `myisamchk': myisamchk.  in verbose mode so
     that it produces more information about the table. Adding `-v' a
     second time produces even more information.

   * *Note `myisamchk -eis TBL_NAME': myisamchk.

     Shows only the most important information from a table. This
     operation is slow because it must read the entire table.

   * *Note `myisamchk -eiv TBL_NAME': myisamchk.

     This is like `-eis', but tells you what is being done.

The TBL_NAME argument can be either the name of a `MyISAM' table or the
name of its index file, as described in *Note myisamchk::.  Multiple
TBL_NAME arguments can be given.

Suppose that a table named `person' has the following structure. (The
`MAX_ROWS' table option is included so that in the example output from
*Note `myisamchk': myisamchk. shown later, some values are smaller and
fit the output format more easily.)

     CREATE TABLE person
     (
       id         INT NOT NULL AUTO_INCREMENT,
       last_name  VARCHAR(20) NOT NULL,
       first_name VARCHAR(20) NOT NULL,
       birth      DATE,
       death      DATE,
       PRIMARY KEY (id),
       INDEX (last_name, first_name),
       INDEX (birth)
     ) MAX_ROWS = 1000000;

Suppose also that the table has these data and index file sizes:

     -rw-rw----  1 mysql  mysql  9347072 Aug 19 11:47 person.MYD
     -rw-rw----  1 mysql  mysql  6066176 Aug 19 11:47 person.MYI

Example of *Note `myisamchk -dvv': myisamchk. output:

     MyISAM file:         person
     Record format:       Packed
     Character set:       latin1_swedish_ci (8)
     File-version:        1
     Creation time:       2009-08-19 16:47:41
     Recover time:        2009-08-19 16:47:56
     Status:              checked,analyzed,optimized keys
     Auto increment key:              1  Last value:                306688
     Data records:               306688  Deleted blocks:                 0
     Datafile parts:             306688  Deleted data:                   0
     Datafile pointer (bytes):        4  Keyfile pointer (bytes):        3
     Datafile length:           9347072  Keyfile length:           6066176
     Max datafile length:    4294967294  Max keyfile length:   17179868159
     Recordlength:                   54

     table description:
     Key Start Len Index   Type                 Rec/key         Root  Blocksize
     1   2     4   unique  long                       1        99328       1024
     2   6     20  multip. varchar prefix           512      3563520       1024
         27    20          varchar                  512
     3   48    3   multip. uint24 NULL           306688      6065152       1024

     Field Start Length Nullpos Nullbit Type
     1     1     1
     2     2     4                      no zeros
     3     6     21                     varchar
     4     27    21                     varchar
     5     48    3      1       1       no zeros
     6     51    3      1       2       no zeros

Explanations for the types of information *Note `myisamchk': myisamchk.
produces are given here.  `Keyfile' refers to the index file.  `Record'
and `row' are synonymous, as are `field' and `column.'

The initial part of the table description contains these values:

   * `MyISAM file'

     Name of the `MyISAM' (index) file.

   * `Record format'

     The format used to store table rows. The preceding examples use
     `Fixed length'. Other possible values are `Compressed' and
     `Packed'. (`Packed' corresponds to what `SHOW TABLE STATUS'
     reports as `Dynamic'.)

   * `Chararacter set'

     The table default character set.

   * `File-version'

     Version of `MyISAM' format. Currently always 1.

   * `Creation time'

     When the data file was created.

   * `Recover time'

     When the index/data file was last reconstructed.

   * `Status'

     Table status flags. Possible values are `crashed', `open',
     `changed', `analyzed', `optimized keys', and `sorted index pages'.

   * `Auto increment key', `Last value'

     The key number associated the table's `AUTO_INCREMENT' column, and
     the most recently generated value for this column. These fields do
     not appear if there is no such column.

   * `Data records'

     The number of rows in the table.

   * `Deleted blocks'

     How many deleted blocks still have reserved space. You can
     optimize your table to minimize this space. See *Note
     myisam-optimization::.

   * `Datafile parts'

     For dynamic-row format, this indicates how many data blocks there
     are. For an optimized table without fragmented rows, this is the
     same as `Data records'.

   * `Deleted data'

     How many bytes of unreclaimed deleted data there are. You can
     optimize your table to minimize this space. See *Note
     myisam-optimization::.

   * `Datafile pointer'

     The size of the data file pointer, in bytes. It is usually 2, 3,
     4, or 5 bytes. Most tables manage with 2 bytes, but this cannot be
     controlled from MySQL yet. For fixed tables, this is a row
     address. For dynamic tables, this is a byte address.

   * `Keyfile pointer'

     The size of the index file pointer, in bytes. It is usually 1, 2,
     or 3 bytes. Most tables manage with 2 bytes, but this is
     calculated automatically by MySQL. It is always a block address.

   * `Max datafile length'

     How long the table data file can become, in bytes.

   * `Max keyfile length'

     How long the table index file can become, in bytes.

   * `Recordlength'

     How much space each row takes, in bytes.

The `table description' part of the output includes a list of all keys
in the table. For each key, *Note `myisamchk': myisamchk. displays some
low-level information:

   * `Key'

     This key's number. This value is shown only for the first column
     of the key. If this value is missing, the line corresponds to the
     second or later column of a multiple-column key. For the table
     shown in the example, there are two `table description' lines for
     the second index. This indicates that it is a multiple-part index
     with two parts.

   * `Start'

     Where in the row this portion of the index starts.

   * `Len'

     How long this portion of the index is. For packed numbers, this
     should always be the full length of the column. For strings, it
     may be shorter than the full length of the indexed column, because
     you can index a prefix of a string column. The total length of a
     multiple-part key is the sum of the `Len' values for all key parts.

   * `Index'

     Whether a key value can exist multiple times in the index.
     Possible values are `unique' or `multip.' (multiple).

   * `Type'

     What data type this portion of the index has. This is a `MyISAM'
     data type with the possible values `packed', `stripped', or
     `empty'.

   * `Root'

     Address of the root index block.

   * `Blocksize'

     The size of each index block. By default this is 1024, but the
     value may be changed at compile time when MySQL is built from
     source.

   * `Rec/key'

     This is a statistical value used by the optimizer. It tells how
     many rows there are per value for this index. A unique index
     always has a value of 1. This may be updated after a table is
     loaded (or greatly changed) with *Note `myisamchk -a': myisamchk.
     If this is not updated at all, a default value of 30 is given.

The last part of the output provides information about each column:

   * `Field'

     The column number.

   * `Start'

     The byte position of the column within table rows.

   * `Length'

     The length of the column in bytes.

   * `Nullpos', `Nullbit'

     For columns that can be `NULL', `MyISAM' stores `NULL' values as a
     flag in a byte. Depending on how many nullable columns there are,
     there can be one or more bytes used for this purpose. The
     `Nullpos' and `Nullbit' values, if nonempty, indicate which byte
     and bit contains that flag indicating whether the column is `NULL'.

     The position and number of bytes used to store `NULL' flags is
     shown in the line for field 1. This is why there are six `Field'
     lines for the `person' table even though it has only five columns.

   * `Type'

     The data type. The value may contain any of the following
     descriptors:

        * `constant'

          All rows have the same value.

        * `no endspace'

          Do not store endspace.

        * `no endspace, not_always'

          Do not store endspace and do not do endspace compression for
          all values.

        * `no endspace, no empty'

          Do not store endspace. Do not store empty values.

        * `table-lookup'

          The column was converted to an *Note `ENUM': enum.

        * `zerofill(N)'

          The most significant N bytes in the value are always 0 and
          are not stored.

        * `no zeros'

          Do not store zeros.

        * `always zero'

          Zero values are stored using one bit.

   * `Huff tree'

     The number of the Huffman tree associated with the column.

   * `Bits'

     The number of bits used in the Huffman tree.

The `Huff tree' and `Bits' fields are displayed if the table has been
compressed with *Note `myisampack': myisampack. See *Note myisampack::,
for an example of this information.

Example of *Note `myisamchk -eiv': myisamchk. output:

     Checking MyISAM file: person
     Data records:  306688   Deleted blocks:       0
     - check file-size
     - check record delete-chain
     No recordlinks
     - check key delete-chain
     block_size 1024:
     - check index reference
     - check data record references index: 1
     Key:  1:  Keyblocks used:  98%  Packed:    0%  Max levels:  3
     - check data record references index: 2
     Key:  2:  Keyblocks used:  99%  Packed:   97%  Max levels:  3
     - check data record references index: 3
     Key:  3:  Keyblocks used:  98%  Packed:  -14%  Max levels:  3
     Total:    Keyblocks used:  98%  Packed:   89%

     - check records and index references*** LOTS OF ROW NUMBERS DELETED ***

     Records:            306688  M.recordlength:       25  Packed:            83%
     Recordspace used:       97% Empty space:           2% Blocks/Record:   1.00
     Record blocks:      306688  Delete blocks:         0
     Record data:       7934464  Deleted data:          0
     Lost space:         256512  Linkdata:        1156096

     User time 43.08, System time 1.68
     Maximum resident set size 0, Integral resident set size 0
     Non-physical pagefaults 0, Physical pagefaults 0, Swaps 0
     Blocks in 0 out 7, Messages in 0 out 0, Signals 0
     Voluntary context switches 0, Involuntary context switches 0
     Maximum memory usage: 1046926 bytes (1023k)

*Note `myisamchk -eiv': myisamchk. output includes the following
information:

   * `Data records'

     The number of rows in the table.

   * `Deleted blocks'

     How many deleted blocks still have reserved space. You can
     optimize your table to minimize this space. See *Note
     myisam-optimization::.

   * `Key'

     The key number.

   * `Keyblocks used'

     What percentage of the keyblocks are used. When a table has just
     been reorganized with *Note `myisamchk': myisamchk, the values are
     very high (very near theoretical maximum).

   * `Packed'

     MySQL tries to pack key values that have a common suffix.  This
     can only be used for indexes on *Note `CHAR': char. and *Note
     `VARCHAR': char. columns. For long indexed strings that have
     similar leftmost parts, this can significantly reduce the space
     used. In the preceding example, the second key is 40 bytes long
     and a 97% reduction in space is achieved.

   * `Max levels'

     How deep the B-tree for this key is. Large tables with long key
     values get high values.

   * `Records'

     How many rows are in the table.

   * `M.recordlength'

     The average row length. This is the exact row length for tables
     with fixed-length rows, because all rows have the same length.

   * `Packed'

     MySQL strips spaces from the end of strings. The `Packed' value
     indicates the percentage of savings achieved by doing this.

   * `Recordspace used'

     What percentage of the data file is used.

   * `Empty space'

     What percentage of the data file is unused.

   * `Blocks/Record'

     Average number of blocks per row (that is, how many links a
     fragmented row is composed of). This is always 1.0 for
     fixed-format tables. This value should stay as close to 1.0 as
     possible. If it gets too large, you can reorganize the table. See
     *Note myisam-optimization::.

   * `Recordblocks'

     How many blocks (links) are used. For fixed-format tables, this is
     the same as the number of rows.

   * `Deleteblocks'

     How many blocks (links) are deleted.

   * `Recorddata'

     How many bytes in the data file are used.

   * `Deleted data'

     How many bytes in the data file are deleted (unused).

   * `Lost space'

     If a row is updated to a shorter length, some space is lost.  This
     is the sum of all such losses, in bytes.

   * `Linkdata'

     When the dynamic table format is used, row fragments are linked
     with pointers (4 to 7 bytes each).  `Linkdata' is the sum of the
     amount of storage used by all such pointers.


File: manual.info,  Node: myisamchk-memory,  Prev: myisamchk-table-info,  Up: myisamchk

4.6.3.6 `myisamchk' Memory Usage
................................

Memory allocation is important when you run *Note `myisamchk':
myisamchk. *Note `myisamchk': myisamchk. uses no more memory than its
memory-related variables are set to. If you are going to use *Note
`myisamchk': myisamchk. on very large tables, you should first decide
how much memory you want it to use. The default is to use only about
3MB to perform repairs. By using larger values, you can get *Note
`myisamchk': myisamchk. to operate faster. For example, if you have
more than 512MB RAM available, you could use options such as these (in
addition to any other options you might specify):

     shell> myisamchk --myisam_sort_buffer_size=256M \
                --key_buffer_size=512M \
                --read_buffer_size=64M \
                --write_buffer_size=64M ...

Using `--myisam_sort_buffer_size=16M' is probably enough for most cases.

Be aware that *Note `myisamchk': myisamchk. uses temporary files in
`TMPDIR'. If `TMPDIR' points to a memory file system, out of memory
errors can easily occur. If this happens, run *Note `myisamchk':
myisamchk. with the `--tmpdir=PATH' option to specify a directory
located on a file system that has more space.

When performing repair operations, *Note `myisamchk': myisamchk.  also
needs a lot of disk space:

   * Twice the size of the data file (the original file and a copy).
     This space is not needed if you do a repair with `--quick'; in
     this case, only the index file is re-created. _This space must be
     available on the same file system as the original data file_, as
     the copy is created in the same directory as the original.

   * Space for the new index file that replaces the old one. The old
     index file is truncated at the start of the repair operation, so
     you usually ignore this space. This space must be available on the
     same file system as the original data file.

   * When using `--recover' or `--sort-recover' (but not when using
     `--safe-recover'), you need space on disk for sorting. This space
     is allocated in the temporary directory (specified by `TMPDIR' or
     `--tmpdir=PATH').  The following formula yields the amount of
     space required:

          (LARGEST_KEY + ROW_POINTER_LENGTH) * NUMBER_OF_ROWS * 2

     You can check the length of the keys and the ROW_POINTER_LENGTH
     with *Note `myisamchk -dv TBL_NAME': myisamchk. (see *Note
     myisamchk-table-info::). The ROW_POINTER_LENGTH and NUMBER_OF_ROWS
     values are the `Datafile pointer' and `Data records' values in the
     table description. To determine the LARGEST_KEY value, check the
     `Key' lines in the table description. The `Len' column indicates
     the number of bytes for each key part. For a multiple-column
     index, the key size is the sum of the `Len' values for all key
     parts.

If you have a problem with disk space during repair, you can try
`--safe-recover' instead of `--recover'.


File: manual.info,  Node: myisamlog,  Next: myisampack,  Prev: myisamchk,  Up: programs-admin-utils

4.6.4 `myisamlog' -- Display MyISAM Log File Contents
-----------------------------------------------------

*Note `myisamlog': myisamlog. processes the contents of a `MyISAM' log
file. To create such a file, start the server with a
`--log-isam=`log_file'' option.

Invoke *Note `myisamlog': myisamlog. like this:

     shell> myisamlog [OPTIONS] [FILE_NAME [TBL_NAME] ...]

The default operation is update (`-u'). If a recovery is done (`-r'),
all writes and possibly updates and deletes are done and errors are
only counted. The default log file name is `myisam.log' if no LOG_FILE
argument is given. If tables are named on the command line, only those
tables are updated.

*Note `myisamlog': myisamlog. supports the following options:

   *  `-?', `-I'

     Display a help message and exit.

   * `-c N'

     Execute only N commands.

   *  `-f N'

     Specify the maximum number of open files.

   *  `-i'

     Display extra information before exiting.

   *  `-o OFFSET'

     Specify the starting offset.

   *  `-p N'

     Remove N components from path.

   *  `-r'

     Perform a recovery operation.

   *  `-R RECORD_POS_FILE RECORD_POS'

     Specify record position file and record position.

   *  `-u'

     Perform an update operation.

   *  `-v'

     Verbose mode. Print more output about what the program does.  This
     option can be given multiple times to produce more and more output.

   *  `-w WRITE_FILE'

     Specify the write file.

   *  `-V'

     Display version information.


File: manual.info,  Node: myisampack,  Next: mysqlaccess,  Prev: myisamlog,  Up: programs-admin-utils

4.6.5 `myisampack' -- Generate Compressed, Read-Only MyISAM Tables
------------------------------------------------------------------

The *Note `myisampack': myisampack. utility compresses `MyISAM' tables.
*Note `myisampack': myisampack.  works by compressing each column in
the table separately.  Usually, *Note `myisampack': myisampack. packs
the data file 40% to 70%.

When the table is used later, the server reads into memory the
information needed to decompress columns. This results in much better
performance when accessing individual rows, because you only have to
uncompress exactly one row.

MySQL uses `mmap()' when possible to perform memory mapping on
compressed tables. If `mmap()' does not work, MySQL falls back to
normal read/write file operations.

Please note the following:

   * If the *Note `mysqld': mysqld. server was invoked with external
     locking disabled, it is not a good idea to invoke *Note
     `myisampack': myisampack. if the table might be updated by the
     server during the packing process. It is safest to compress tables
     with the server stopped.

   * After packing a table, it becomes read only. This is generally
     intended (such as when accessing packed tables on a CD).

Invoke *Note `myisampack': myisampack. like this:

     shell> myisampack [OPTIONS] FILE_NAME ...

Each file name argument should be the name of an index (`.MYI') file.
If you are not in the database directory, you should specify the path
name to the file. It is permissible to omit the `.MYI' extension.

After you compress a table with *Note `myisampack': myisampack, you
should use *Note `myisamchk -rq': myisamchk. to rebuild its indexes.
*Note myisamchk::.

*Note `myisampack': myisampack. supports the following options. It also
reads option files and supports the options for processing them
described at *Note option-file-options::.

   *  `--help', `-?'

     Display a help message and exit.

   *  `--backup', `-b'

     Make a backup of each table's data file using the name
     `TBL_NAME.OLD'.

   *  `--character-sets-dir=PATH'

     The directory where character sets are installed. See *Note
     charset-configuration::.

   *  `--debug[=DEBUG_OPTIONS]', `-# [DEBUG_OPTIONS]'

     Write a debugging log. A typical DEBUG_OPTIONS string is
     `'d:t:o,FILE_NAME''.  The default is `'d:t:o''.

   *  `--force', `-f'

     Produce a packed table even if it becomes larger than the original
     or if the intermediate file from an earlier invocation of *Note
     `myisampack': myisampack. exists.  (*Note `myisampack':
     myisampack. creates an intermediate file named `TBL_NAME.TMD' in
     the database directory while it compresses the table. If you kill
     *Note `myisampack': myisampack, the `.TMD' file might not be
     deleted.)  Normally, *Note `myisampack': myisampack. exits with an
     error if it finds that `TBL_NAME.TMD' exists. With `--force',
     *Note `myisampack': myisampack. packs the table anyway.

   *  `--join=BIG_TBL_NAME', `-j BIG_TBL_NAME'

     Join all tables named on the command line into a single packed
     table BIG_TBL_NAME. All tables that are to be combined _must_ have
     identical structure (same column names and types, same indexes,
     and so forth).

     BIG_TBL_NAME must not exist prior to the join operation. All
     source tables named on the command line to be merged into
     BIG_TBL_NAME must exist. The source tables are read for the join
     operation but not modified. The join operation does not create a
     `.frm' file for BIG_TBL_NAME, so after the join operation
     finishes, copy the `.frm' file from one of the source tables and
     name it `BIG_TBL_NAME.frm'.

   *  `--silent', `-s'

     Silent mode. Write output only when errors occur.

   *  `--test', `-t'

     Do not actually pack the table, just test packing it.

   *  `--tmpdir=PATH', `-T PATH'

     Use the named directory as the location where *Note `myisampack':
     myisampack. creates temporary files.

   *  `--verbose', `-v'

     Verbose mode. Write information about the progress of the packing
     operation and its result.

   *  `--version', `-V'

     Display version information and exit.

   *  `--wait', `-w'

     Wait and retry if the table is in use. If the *Note `mysqld':
     mysqld. server was invoked with external locking disabled, it is
     not a good idea to invoke *Note `myisampack': myisampack. if the
     table might be updated by the server during the packing process.

The following sequence of commands illustrates a typical table
compression session:

     shell> ls -l station.*
     -rw-rw-r--   1 monty    my         994128 Apr 17 19:00 station.MYD
     -rw-rw-r--   1 monty    my          53248 Apr 17 19:00 station.MYI
     -rw-rw-r--   1 monty    my           5767 Apr 17 19:00 station.frm

     shell> myisamchk -dvv station

     MyISAM file:     station
     Isam-version:  2
     Creation time: 1996-03-13 10:08:58
     Recover time:  1997-02-02  3:06:43
     Data records:              1192  Deleted blocks:              0
     Datafile parts:            1192  Deleted data:                0
     Datafile pointer (bytes):     2  Keyfile pointer (bytes):     2
     Max datafile length:   54657023  Max keyfile length:   33554431
     Recordlength:               834
     Record format: Fixed length

     table description:
     Key Start Len Index   Type                 Root  Blocksize    Rec/key
     1   2     4   unique  unsigned long        1024       1024          1
     2   32    30  multip. text                10240       1024          1

     Field Start Length Type
     1     1     1
     2     2     4
     3     6     4
     4     10    1
     5     11    20
     6     31    1
     7     32    30
     8     62    35
     9     97    35
     10    132   35
     11    167   4
     12    171   16
     13    187   35
     14    222   4
     15    226   16
     16    242   20
     17    262   20
     18    282   20
     19    302   30
     20    332   4
     21    336   4
     22    340   1
     23    341   8
     24    349   8
     25    357   8
     26    365   2
     27    367   2
     28    369   4
     29    373   4
     30    377   1
     31    378   2
     32    380   8
     33    388   4
     34    392   4
     35    396   4
     36    400   4
     37    404   1
     38    405   4
     39    409   4
     40    413   4
     41    417   4
     42    421   4
     43    425   4
     44    429   20
     45    449   30
     46    479   1
     47    480   1
     48    481   79
     49    560   79
     50    639   79
     51    718   79
     52    797   8
     53    805   1
     54    806   1
     55    807   20
     56    827   4
     57    831   4

     shell> myisampack station.MYI
     Compressing station.MYI: (1192 records)
     - Calculating statistics

     normal:     20  empty-space:   16  empty-zero:     12  empty-fill:  11
     pre-space:   0  end-space:     12  table-lookups:   5  zero:         7
     Original trees:  57  After join: 17
     - Compressing file
     87.14%
     Remember to run myisamchk -rq on compressed tables

     shell> ls -l station.*
     -rw-rw-r--   1 monty    my         127874 Apr 17 19:00 station.MYD
     -rw-rw-r--   1 monty    my          55296 Apr 17 19:04 station.MYI
     -rw-rw-r--   1 monty    my           5767 Apr 17 19:00 station.frm

     shell> myisamchk -dvv station

     MyISAM file:     station
     Isam-version:  2
     Creation time: 1996-03-13 10:08:58
     Recover time:  1997-04-17 19:04:26
     Data records:               1192  Deleted blocks:              0
     Datafile parts:             1192  Deleted data:                0
     Datafile pointer (bytes):      3  Keyfile pointer (bytes):     1
     Max datafile length:    16777215  Max keyfile length:     131071
     Recordlength:                834
     Record format: Compressed

     table description:
     Key Start Len Index   Type                 Root  Blocksize    Rec/key
     1   2     4   unique  unsigned long       10240       1024          1
     2   32    30  multip. text                54272       1024          1

     Field Start Length Type                         Huff tree  Bits
     1     1     1      constant                             1     0
     2     2     4      zerofill(1)                          2     9
     3     6     4      no zeros, zerofill(1)                2     9
     4     10    1                                           3     9
     5     11    20     table-lookup                         4     0
     6     31    1                                           3     9
     7     32    30     no endspace, not_always              5     9
     8     62    35     no endspace, not_always, no empty    6     9
     9     97    35     no empty                             7     9
     10    132   35     no endspace, not_always, no empty    6     9
     11    167   4      zerofill(1)                          2     9
     12    171   16     no endspace, not_always, no empty    5     9
     13    187   35     no endspace, not_always, no empty    6     9
     14    222   4      zerofill(1)                          2     9
     15    226   16     no endspace, not_always, no empty    5     9
     16    242   20     no endspace, not_always              8     9
     17    262   20     no endspace, no empty                8     9
     18    282   20     no endspace, no empty                5     9
     19    302   30     no endspace, no empty                6     9
     20    332   4      always zero                          2     9
     21    336   4      always zero                          2     9
     22    340   1                                           3     9
     23    341   8      table-lookup                         9     0
     24    349   8      table-lookup                        10     0
     25    357   8      always zero                          2     9
     26    365   2                                           2     9
     27    367   2      no zeros, zerofill(1)                2     9
     28    369   4      no zeros, zerofill(1)                2     9
     29    373   4      table-lookup                        11     0
     30    377   1                                           3     9
     31    378   2      no zeros, zerofill(1)                2     9
     32    380   8      no zeros                             2     9
     33    388   4      always zero                          2     9
     34    392   4      table-lookup                        12     0
     35    396   4      no zeros, zerofill(1)               13     9
     36    400   4      no zeros, zerofill(1)                2     9
     37    404   1                                           2     9
     38    405   4      no zeros                             2     9
     39    409   4      always zero                          2     9
     40    413   4      no zeros                             2     9
     41    417   4      always zero                          2     9
     42    421   4      no zeros                             2     9
     43    425   4      always zero                          2     9
     44    429   20     no empty                             3     9
     45    449   30     no empty                             3     9
     46    479   1                                          14     4
     47    480   1                                          14     4
     48    481   79     no endspace, no empty               15     9
     49    560   79     no empty                             2     9
     50    639   79     no empty                             2     9
     51    718   79     no endspace                         16     9
     52    797   8      no empty                             2     9
     53    805   1                                          17     1
     54    806   1                                           3     9
     55    807   20     no empty                             3     9
     56    827   4      no zeros, zerofill(2)                2     9
     57    831   4      no zeros, zerofill(1)                2     9

*Note `myisampack': myisampack. displays the following kinds of
information:

   * `normal'

     The number of columns for which no extra packing is used.

   * `empty-space'

     The number of columns containing values that are only spaces.
     These occupy one bit.

   * `empty-zero'

     The number of columns containing values that are only binary
     zeros. These occupy one bit.

   * `empty-fill'

     The number of integer columns that do not occupy the full byte
     range of their type. These are changed to a smaller type. For
     example, a *Note `BIGINT': integer-types.  column (eight bytes)
     can be stored as a *Note `TINYINT': integer-types. column (one
     byte) if all its values are in the range from `-128' to `127'.

   * `pre-space'

     The number of decimal columns that are stored with leading spaces.
     In this case, each value contains a count for the number of
     leading spaces.

   * `end-space'

     The number of columns that have a lot of trailing spaces. In this
     case, each value contains a count for the number of trailing
     spaces.

   * `table-lookup'

     The column had only a small number of different values, which were
     converted to an *Note `ENUM': enum. before Huffman compression.

   * `zero'

     The number of columns for which all values are zero.

   * `Original trees'

     The initial number of Huffman trees.

   * `After join'

     The number of distinct Huffman trees left after joining trees to
     save some header space.

After a table has been compressed, the `Field' lines displayed by *Note
`myisamchk -dvv': myisamchk. include additional information about each
column:

   * `Type'

     The data type. The value may contain any of the following
     descriptors:

        * `constant'

          All rows have the same value.

        * `no endspace'

          Do not store endspace.

        * `no endspace, not_always'

          Do not store endspace and do not do endspace compression for
          all values.

        * `no endspace, no empty'

          Do not store endspace. Do not store empty values.

        * `table-lookup'

          The column was converted to an *Note `ENUM': enum.

        * `zerofill(N)'

          The most significant N bytes in the value are always 0 and
          are not stored.

        * `no zeros'

          Do not store zeros.

        * `always zero'

          Zero values are stored using one bit.

   * `Huff tree'

     The number of the Huffman tree associated with the column.

   * `Bits'

     The number of bits used in the Huffman tree.

After you run *Note `myisampack': myisampack, you must run *Note
`myisamchk': myisamchk. to re-create any indexes. At this time, you can
also sort the index blocks and create statistics needed for the MySQL
optimizer to work more efficiently:

     shell> myisamchk -rq --sort-index --analyze TBL_NAME.MYI

After you have installed the packed table into the MySQL database
directory, you should execute *Note `mysqladmin flush-tables':
mysqladmin. to force *Note `mysqld': mysqld. to start using the new
table.

To unpack a packed table, use the `--unpack' option to *Note
`myisamchk': myisamchk.


File: manual.info,  Node: mysqlaccess,  Next: mysqlbinlog,  Prev: myisampack,  Up: programs-admin-utils

4.6.6 `mysqlaccess' -- Client for Checking Access Privileges
------------------------------------------------------------

*Note `mysqlaccess': mysqlaccess. is a diagnostic tool that Yves
Carlier has provided for the MySQL distribution. It checks the access
privileges for a host name, user name, and database combination. Note
that *Note `mysqlaccess': mysqlaccess. checks access using only the
`user', `db', and `host' tables. It does not check table, column, or
routine privileges specified in the `tables_priv', `columns_priv', or
`procs_priv' tables.

Invoke *Note `mysqlaccess': mysqlaccess. like this:

     shell> mysqlaccess [HOST_NAME [USER_NAME [DB_NAME]]] [OPTIONS]

*Note `mysqlaccess': mysqlaccess. supports the following options.

*`mysqlaccess' Options*

Format      Option File Description
-brief      brief       Generate reports in
                        single-line tabular format
-commit     commit      Copy the new access
                        privileges from the
                        temporary tables to the
                        original grant tables
-copy       copy        Reload the temporary grant
                        tables from original ones
-db=db_name db          Specify the database name
-debug=#    debug       Specify the debug level
-help                   Display help message and exit
-host=host_namehost        Connect to the MySQL server
                        on the given host
-howto      howto       Display some examples that
                        show how to use mysqlaccess
-old_server old_server  Assume that the server is an
                        old MySQL server (prior to
                        MySQL 3.21)
-password[=password]password    The password to use when
                        connecting to the server
-plan       plan        Display suggestions and
                        ideas for future releases
-preview    preview     Show the privilege
                        differences after making
                        changes to the temporary
                        grant tables
-relnotes   relnotes    Display the release notes
-rhost=host_namerhost       Connect to the MySQL server
                        on the given host
-rollback   rollback    Undo the most recent changes
                        to the temporary grant
                        tables.
-spassword[=password]spassword   The password to use when
                        connecting to the server as
                        the superuser
-superuser=user_namesuperuser   Specify the user name for
                        connecting as the superuser
-table      table       Generate reports in table
                        format
-user=user_name,user        MySQL user name to use when
                        connecting to server
-version                Display version information
                        and exit

   *  `--help', `-?'

     Display a help message and exit.

   *  `--brief', `-b'

     Generate reports in single-line tabular format.

   *  `--commit'

     Copy the new access privileges from the temporary tables to the
     original grant tables. The grant tables must be flushed for the
     new privileges to take effect. (For example, execute a *Note
     `mysqladmin reload': mysqladmin. command.)

   *  `--copy'

     Reload the temporary grant tables from original ones.

   *  `--db=DB_NAME', `-d DB_NAME'

     Specify the database name.

   *  `--debug=N'

     Specify the debug level. N can be an integer from 0 to 3.

   *  `--host=HOST_NAME', `-h HOST_NAME'

     The host name to use in the access privileges.

   *  `--howto'

     Display some examples that show how to use *Note `mysqlaccess':
     mysqlaccess.

   *  `--old_server'

     Assume that the server is an old MySQL server (before MySQL 3.21)
     that does not yet know how to handle full `WHERE' clauses.

   *  `--password[=PASSWORD]', `-p[PASSWORD]'

     The password to use when connecting to the server. If you omit the
     PASSWORD value following the `--password' or `-p' option on the
     command line, *Note `mysqlaccess': mysqlaccess. prompts for one.

     Specifying a password on the command line should be considered
     insecure. See *Note password-security-user::.

   *  `--plan'

     Display suggestions and ideas for future releases.

   *  `--preview'

     Show the privilege differences after making changes to the
     temporary grant tables.

   *  `--relnotes'

     Display the release notes.

   *  `--rhost=HOST_NAME', `-H HOST_NAME'

     Connect to the MySQL server on the given host.

   *  `--rollback'

     Undo the most recent changes to the temporary grant tables.

   *  `--spassword[=PASSWORD]', `-P[PASSWORD]'

     The password to use when connecting to the server as the
     superuser. If you omit the PASSWORD value following the
     `--spassword' or `-p' option on the command line, *Note
     `mysqlaccess': mysqlaccess. prompts for one.

     Specifying a password on the command line should be considered
     insecure. See *Note password-security-user::.

   *  `--superuser=USER_NAME', `-U USER_NAME'

     Specify the user name for connecting as the superuser.

   *  `--table', `-t'

     Generate reports in table format.

   *  `--user=USER_NAME', `-u USER_NAME'

     The user name to use in the access privileges.

   *  `--version', `-v'

     Display version information and exit.

If your MySQL distribution is installed in some nonstandard location,
you must change the location where *Note `mysqlaccess': mysqlaccess.
expects to find the *Note `mysql': mysql. client. Edit the
`mysqlaccess' script at approximately line 18. Search for a line that
looks like this:

     $MYSQL     = '/usr/local/bin/mysql';    # path to mysql executable

Change the path to reflect the location where *Note `mysql': mysql.
actually is stored on your system. If you do not do this, a `Broken
pipe' error will occur when you run *Note `mysqlaccess': mysqlaccess.


File: manual.info,  Node: mysqlbinlog,  Next: mysqldumpslow,  Prev: mysqlaccess,  Up: programs-admin-utils

4.6.7 `mysqlbinlog' -- Utility for Processing Binary Log Files
--------------------------------------------------------------

* Menu:

* mysqlbinlog-hexdump::          `mysqlbinlog' Hex Dump Format
* mysqlbinlog-row-events::       `mysqlbinlog' Row Event Display

The server's binary log consists of files containing `events' that
describe modifications to database contents. The server writes these
files in binary format. To display their contents in text format, use
the *Note `mysqlbinlog': mysqlbinlog. utility. You can also use *Note
`mysqlbinlog': mysqlbinlog. to display the contents of relay log files
written by a slave server in a replication setup because relay logs
have the same format as binary logs. The binary log and relay log are
discussed further in *Note binary-log::, and *Note slave-logs::.

Invoke *Note `mysqlbinlog': mysqlbinlog. like this:

     shell> mysqlbinlog [OPTIONS] LOG_FILE ...

For example, to display the contents of the binary log file named
`binlog.000003', use this command:

     shell> mysqlbinlog binlog.0000003

The output includes events contained in `binlog.000003'. For
statement-based logging, event information includes the SQL statement,
the ID of the server on which it was executed, the timestamp when the
statement was executed, how much time it took, and so forth. For
row-based logging, the event indicates a row change rather than an SQL
statement. See *Note replication-formats::, for information about
logging modes.

Events are preceded by header comments that provide additional
information. For example:

     # at 141
     #100309  9:28:36 server id 123  end_log_pos 245
       Query thread_id=3350  exec_time=11  error_code=0

In the first line, the number following `at' indicates the starting
position of the event in the binary log file.

The second line starts with a date and time indicating when the
statement started on the server where the event originated. For
replication, this timestamp is propagated to slave servers.  `server
id' is the `server_id' value of the server where the event originated.
`end_log_pos' indicates where the next event starts (that is, it is the
end position of the current event + 1). `thread_id' indicates which
thread executed the event.  `exec_time' is the time spent executing the
event, on a master server. On a slave, it is the difference of the end
execution time on the slave minus the beginning execution time on the
master. The difference serves as an indicator of how much replication
lags behind the master.  `error_code' indicates the result from
executing the event. Zero means that no error occurred.

The output from *Note `mysqlbinlog': mysqlbinlog. can be re-executed
(for example, by using it as input to *Note `mysql': mysql.) to redo
the statements in the log.  This is useful for recovery operations
after a server crash. For other usage examples, see the discussion
later in this section and in *Note point-in-time-recovery::.

Normally, you use *Note `mysqlbinlog': mysqlbinlog. to read binary log
files directly and apply them to the local MySQL server. It is also
possible to read binary logs from a remote server by using the
`--read-from-remote-server' option. To read remote binary logs, the
connection parameter options can be given to indicate how to connect to
the server.  These options are `--host', `--password', `--port',
`--protocol', `--socket', and `--user'; they are ignored except when
you also use the `--read-from-remote-server' option.

*Note `mysqlbinlog': mysqlbinlog. supports the following options, which
can be specified on the command line or in the `[mysqlbinlog]' and
`[client]' groups of an option file. *Note `mysqlbinlog': mysqlbinlog.
also supports the options for processing option files described at
*Note option-file-options::.

*`mysqlbinlog' Options*

Format      Option File Description                   IntroducedRemoved
-base64-output=valuebase64-outputPrint binary log entries              
                        using base-64 encoding                
-character-sets-dir=pathcharacter-sets-dirThe directory where                   
                        character sets are installed          
-database=db_namedatabase    List entries for just this            
                        database                              
-debug[=debug_options]debug       Write a debugging log                 
-debug-checkdebug-check Print debugging information           
                        when the program exits                
-debug-info debug-info  Print debugging information,          
                        memory and CPU statistics             
                        when the program exits                
-default-auth=plugindefault-auth=pluginThe authentication plugin to  5.5.10  
                        use                                   
-disable-log-bindisable-log-binDisable binary logging                
-force-if-openforce-if-openRead binary log files even            
                        if open or not closed                 
                        properly                              
-force-read force-read  If mysqlbinlog reads a                
                        binary log event that it              
                        does not recognize, it                
                        prints a warning                      
-help                   Display help message and exit         
-hexdump    hexdump     Display a hex dump of the             
                        log in comments                       
-host=host_namehost        Connect to the MySQL server           
                        on the given host                     
-local-load=pathlocal-load  Prepare local temporary               
                        files for LOAD DATA INFILE            
                        in the specified directory            
-offset=#   offset      Skip the first N entries in           
                        the log                               
-password[=password]password    The password to use when              
                        connecting to the server              
-plugin-dir=pathplugin-dir=pathThe directory where plugins   5.5.10  
                        are located                           
-port=port_numport        The TCP/IP port number to             
                        use for the connection                
-position=# position    Deprecated. Use                       5.5.3
                        -start-position                       
-protocol=typeprotocol    The connection protocol to            
                        use                                   
-read-from-remote-serverread-from-remote-serverRead binary log from MySQL            
                        server rather than local log          
                        file                                  
-result-file=nameresult-file Direct output to the given            
                        file                                  
-server-id=idserver-id   Extract only those events             
                        created by the server having          
                        the given server ID                   
-set-charset=charset_nameset-charset Add a SET NAMES charset_name          
                        statement to the output               
-short-form short-form  Display only the statements           
                        contained in the log                  
-socket=pathsocket      For connections to localhost          
-start-datetime=datetimestart-datetimeRead binary log from first            
                        event with timestamp equal            
                        to or later than datetime             
                        argument                              
-start-position=#start-positionRead binary log from first            
                        event with position equal to          
                        or greater than argument              
-stop-datetime=datetimestop-datetimeStop reading binary log at            
                        first event with timestamp            
                        equal to or greater than              
                        datetime argument                     
-stop-position=#stop-positionStop reading binary log at            
                        first event with position             
                        equal to or greater than              
                        argument                              
-to-last-logto-last-log Do not stop at the end of             
                        requested binary log from a           
                        MySQL server, but rather              
                        continue printing to end of           
                        last binary log                       
-user=user_name,user        MySQL user name to use when           
                        connecting to server                  
-verbose                Reconstruct row events as             
                        SQL statements                        
-version                Display version information           
                        and exit                              

   *  `--help', `-?'

     Display a help message and exit.

   *  `--base64-output[=VALUE]'

     This option determines when events should be displayed encoded as
     base-64 strings using *Note `BINLOG': binlog. statements. The
     option has these permissible values (not case sensitive):

        * `AUTO' ("automatic") or `UNSPEC' ("unspecified") displays
          *Note `BINLOG': binlog. statements automatically when
          necessary (that is, for format description events and row
          events). If no `--base64-output' option is given, the effect
          is the same as `--base64-output=AUTO'.

          *Note*:

          Automatic *Note `BINLOG': binlog.  display is the only safe
          behavior if you intend to use the output of *Note
          `mysqlbinlog': mysqlbinlog. to re-execute binary log file
          contents. The other option values are intended only for
          debugging or testing purposes because they may produce output
          that does not include all events in executable form.

        * `ALWAYS' displays *Note `BINLOG': binlog. statements whenever
          possible. If the `--base64-output' option is given without a
          value, the effect is the same as `--base64-output=ALWAYS'.

          *Note*:

          Changes to replication in MySQL 5.6 make output generated by
          this option unusable, so `ALWAYS' is deprecated as of MySQL
          5.5.8 and will be an invalid value in MySQL 5.6

        * `NEVER' causes *Note `BINLOG': binlog. statements not to be
          displayed. *Note `mysqlbinlog': mysqlbinlog. exits with an
          error if a row event is found that must be displayed using
          *Note `BINLOG': binlog.

        * `DECODE-ROWS' specifies to *Note `mysqlbinlog': mysqlbinlog.
          that you intend for row events to be decoded and displayed as
          commented SQL statements by also specifying the `--verbose'
          option.  Like `NEVER', `DECODE-ROWS' suppresses display of
          *Note `BINLOG': binlog. statements, but unlike `NEVER', it
          does not exit with an error if a row event is found.

     For examples that show the effect of `--base64-output' and
     `--verbose' on row event output, see *Note
     mysqlbinlog-row-events::.

   *  `--bind-address=IP_ADDRESS'

     On a computer having multiple network interfaces, this option can
     be used to select which interface is employed when connecting to
     the MySQL server.

     This option is supported beginning with MySQL 5.5.8.

   *  `--character-sets-dir=PATH'

     The directory where character sets are installed. See *Note
     charset-configuration::.

   *  `--database=DB_NAME', `-d DB_NAME'

     This option causes *Note `mysqlbinlog': mysqlbinlog. to output
     entries from the binary log (local log only) that occur while
     DB_NAME is been selected as the default database by *Note `USE':
     use.

     The `--database' option for *Note `mysqlbinlog': mysqlbinlog. is
     similar to the `--binlog-do-db' option for *Note `mysqld': mysqld,
     but can be used to specify only one database. If `--database' is
     given multiple times, only the last instance is used.

     The effects of this option depend on whether the statement-based
     or row-based logging format is in use, in the same way that the
     effects of `--binlog-do-db' depend on whether statement-based or
     row-based logging is in use.

     Statement-based logging

     The `--database' option works as follows:

        * While DB_NAME is the default database, statements are output
          whether they modify tables in DB_NAME or a different database.

        * Unless DB_NAME is selected as the default database,
          statements are not output, even if they modify tables in
          DB_NAME.

        * There is an exception for *Note `CREATE DATABASE':
          create-database, *Note `ALTER DATABASE': alter-database, and
          *Note `DROP DATABASE': drop-database. The database being
          _created, altered, or dropped_ is considered to be the
          default database when determining whether to output the
          statement.

     Suppose that the binary log was created by executing these
     statements using statement-based-logging:

          INSERT INTO test.t1 (i) VALUES(100);
          INSERT INTO db2.t2 (j)  VALUES(200);
          USE test;
          INSERT INTO test.t1 (i) VALUES(101);
          INSERT INTO t1 (i)      VALUES(102);
          INSERT INTO db2.t2 (j)  VALUES(201);
          USE db2;
          INSERT INTO test.t1 (i) VALUES(103);
          INSERT INTO db2.t2 (j)  VALUES(202);
          INSERT INTO t2 (j)      VALUES(203);

     *Note `mysqlbinlog --database=test': mysqlbinlog. does not output
     the first two *Note `INSERT': insert.  statements because there is
     no default database. It outputs the three *Note `INSERT': insert.
     statements following *Note `USE test': use, but not the three
     *Note `INSERT': insert. statements following *Note `USE db2': use.

     *Note `mysqlbinlog --database=db2': mysqlbinlog. does not output
     the first two *Note `INSERT': insert.  statements because there is
     no default database. It does not output the three *Note `INSERT':
     insert.  statements following *Note `USE test': use, but does
     output the three *Note `INSERT': insert.  statements following
     *Note `USE db2': use.

     Row-based logging

     *Note `mysqlbinlog': mysqlbinlog. outputs only entries that change
     tables belonging to DB_NAME. The default database has no effect on
     this. Suppose that the binary log just described was created using
     row-based logging rather than statement-based logging. *Note
     `mysqlbinlog --database=test': mysqlbinlog. outputs only those
     entries that modify `t1' in the test database, regardless of
     whether *Note `USE': use.  was issued or what the default database
     is.

     If a server is running with `binlog_format' set to `MIXED' and you
     want it to be possible to use *Note `mysqlbinlog': mysqlbinlog.
     with the `--database' option, you must ensure that tables that are
     modified are in the database selected by *Note `USE': use. (In
     particular, no cross-database updates should be used.)

     *Note*:

     Prior to MySQL Cluster NDB 7.2.2, this option did not work
     correctly with MySQL Cluster tables unless, unless the binary log
     was generated using `--log-bin-use-v1-row-events=0'.  (Bug
     #13067813)

   *  `--debug[=DEBUG_OPTIONS]', `-# [DEBUG_OPTIONS]'

     Write a debugging log. A typical DEBUG_OPTIONS string is
     `'d:t:o,FILE_NAME''.  The default is
     `'d:t:o,/tmp/mysqlbinlog.trace''.

   *  `--debug-check'

     Print some debugging information when the program exits.

   *  `--debug-info'

     Print debugging information and memory and CPU usage statistics
     when the program exits.

   *  `--default-auth=PLUGIN'

     The client-side authentication plugin to use. See *Note
     pluggable-authentication::.

     This option was added in MySQL 5.5.10.

   *  `--disable-log-bin', `-D'

     Disable binary logging. This is useful for avoiding an endless
     loop if you use the `--to-last-log' option and are sending the
     output to the same MySQL server. This option also is useful when
     restoring after a crash to avoid duplication of the statements you
     have logged.

     This option requires that you have the `SUPER' privilege. It causes
     *Note `mysqlbinlog': mysqlbinlog. to include a `SET sql_log_bin =
     0' statement in its output to disable binary logging of the
     remaining output. The *Note `SET': set-statement.  statement is
     ineffective unless you have the `SUPER' privilege.

   *  `--force-if-open', `-F'

     Read binary log files even if they are open or were not closed
     properly.

   *  `--force-read', `-f'

     With this option, if *Note `mysqlbinlog': mysqlbinlog. reads a
     binary log event that it does not recognize, it prints a warning,
     ignores the event, and continues. Without this option, *Note
     `mysqlbinlog': mysqlbinlog. stops if it reads such an event.

   *  `--hexdump', `-H'

     Display a hex dump of the log in comments, as described in *Note
     mysqlbinlog-hexdump::. The hex output can be helpful for
     replication debugging.

   *  `--host=HOST_NAME', `-h HOST_NAME'

     Get the binary log from the MySQL server on the given host.

   *  `--local-load=PATH', `-l PATH'

     Prepare local temporary files for *Note `LOAD DATA INFILE':
     load-data. in the specified directory.

     *Important*:

     These temporary files are not automatically removed by *Note
     `mysqlbinlog': mysqlbinlog. or any other MySQL program.

   *  `--offset=N', `-o N'

     Skip the first N entries in the log.

   *  `--password[=PASSWORD]', `-p[PASSWORD]'

     The password to use when connecting to the server. If you use the
     short option form (`-p'), you _cannot_ have a space between the
     option and the password. If you omit the PASSWORD value following
     the `--password' or `-p' option on the command line, *Note
     `mysqlbinlog': mysqlbinlog. prompts for one.

     Specifying a password on the command line should be considered
     insecure. See *Note password-security-user::. You can use an
     option file to avoid giving the password on the command line.

   *  `--plugin-dir=PATH'

     The directory in which to look for plugins. It may be necessary to
     specify this option if the `--default-auth' option is used to
     specify an authentication plugin but *Note `mysqlbinlog':
     mysqlbinlog. does not find it. See *Note
     pluggable-authentication::.

     This option was added in MySQL 5.5.10.

   *  `--port=PORT_NUM', `-P PORT_NUM'

     The TCP/IP port number to use for connecting to a remote server.

   *  `--position=N'

     Deprecated. Use `--start-position' instead. `--position' was
     removed in MySQL 5.5.3.

   *  `--protocol={TCP|SOCKET|PIPE|MEMORY}'

     The connection protocol to use for connecting to the server.  It
     is useful when the other connection parameters normally would
     cause a protocol to be used other than the one you want. For
     details on the permissible values, see *Note connecting::.

   *  `--read-from-remote-server', `-R'

     Read the binary log from a MySQL server rather than reading a
     local log file. Any connection parameter options are ignored
     unless this option is given as well. These options are `--host',
     `--password', `--port', `--protocol', `--socket', and `--user'.

     This option requires that the remote server be running. It works
     only for binary log files on the remote server, not relay log
     files.

   *  `--result-file=NAME', `-r NAME'

     Direct output to the given file.

   *  `--server-id=ID'

     Display only those events created by the server having the given
     server ID.

   *  `--server-id-bits=N'

     Use only the first N bits of the `server_id' to identify the
     server. If the binary log was written by a *Note `mysqld': mysqld.
     with server-id-bits set to less than 32 and user data stored in
     the most significant bit, running *Note `mysqlbinlog':
     mysqlbinlog. with `--server-id-bits' set to 32 enables this data
     to be seen.

     This option is supported only by the versions of *Note
     `mysqlbinlog': mysqlbinlog. supplied with the MySQL Cluster
     distribution, or built from the MySQL Cluster sources.

   *  `--set-charset=CHARSET_NAME'

     Add a `SET NAMES CHARSET_NAME' statement to the output to specify
     the character set to be used for processing log files.

   *  `--short-form', `-s'

     Display only the statements contained in the log, without any
     extra information or row-based events. This is for testing only,
     and should not be used in production systems.

   *  `--socket=PATH', `-S PATH'

     For connections to `localhost', the Unix socket file to use, or,
     on Windows, the name of the named pipe to use.

   *  `--start-datetime=DATETIME'

     Start reading the binary log at the first event having a timestamp
     equal to or later than the DATETIME argument. The DATETIME value
     is relative to the local time zone on the machine where you run
     *Note `mysqlbinlog': mysqlbinlog. The value should be in a format
     accepted for the *Note `DATETIME': datetime. or *Note `TIMESTAMP':
     datetime. data types. For example:

          shell> mysqlbinlog --start-datetime="2005-12-25 11:25:56" binlog.000003

     This option is useful for point-in-time recovery. See *Note
     backup-strategy-example::.

   *  `--start-position=N', `-j N'

     Start reading the binary log at the first event having a position
     equal to or greater than N. This option applies to the first log
     file named on the command line.

     This option is useful for point-in-time recovery. See *Note
     backup-strategy-example::.

   *  `--stop-datetime=DATETIME'

     Stop reading the binary log at the first event having a timestamp
     equal to or later than the DATETIME argument. This option is
     useful for point-in-time recovery. See the description of the
     `--start-datetime' option for information about the DATETIME value.

     This option is useful for point-in-time recovery. See *Note
     backup-strategy-example::.

   *  `--stop-position=N'

     Stop reading the binary log at the first event having a position
     equal to or greater than N. This option applies to the last log
     file named on the command line.

     This option is useful for point-in-time recovery. See *Note
     backup-strategy-example::.

   *  `--to-last-log', `-t'

     Do not stop at the end of the requested binary log from a MySQL
     server, but rather continue printing until the end of the last
     binary log. If you send the output to the same MySQL server, this
     may lead to an endless loop. This option requires
     `--read-from-remote-server'.

   *  `--user=USER_NAME', `-u USER_NAME'

     The MySQL user name to use when connecting to a remote server.

   *  `--verbose', `-v'

     Reconstruct row events and display them as commented SQL
     statements. If this option is given twice, the output includes
     comments to indicate column data types and some metadata.

     For examples that show the effect of `--base64-output' and
     `--verbose' on row event output, see *Note
     mysqlbinlog-row-events::.

   *  `--version', `-V'

     Display version information and exit.

     In MySQL 5.5, the version number shown for *Note `mysqlbinlog':
     mysqlbinlog. is always 3.3.

You can also set the following variable by using `--VAR_NAME=VALUE'
syntax:

   *  `open_files_limit'

     Specify the number of open file descriptors to reserve.

You can pipe the output of *Note `mysqlbinlog': mysqlbinlog. into the
*Note `mysql': mysql. client to execute the events contained in the
binary log. This technique is used to recover from a crash when you
have an old backup (see *Note point-in-time-recovery::). For example:

     shell> mysqlbinlog binlog.000001 | mysql -u root -p

Or:

     shell> mysqlbinlog binlog.[0-9]* | mysql -u root -p

You can also redirect the output of *Note `mysqlbinlog': mysqlbinlog.
to a text file instead, if you need to modify the statement log first
(for example, to remove statements that you do not want to execute for
some reason).  After editing the file, execute the statements that it
contains by using it as input to the *Note `mysql': mysql. program:

     shell> mysqlbinlog binlog.000001 > tmpfile
     shell> ... EDIT TMPFILE ...
     shell> mysql -u root -p < tmpfile

When *Note `mysqlbinlog': mysqlbinlog. is invoked with the
`--start-position' option, it displays only those events with an offset
in the binary log greater than or equal to a given position (the given
position must match the start of one event). It also has options to stop
and start when it sees an event with a given date and time. This
enables you to perform point-in-time recovery using the
`--stop-datetime' option (to be able to say, for example, `roll forward
my databases to how they were today at 10:30 a.m.').

If you have more than one binary log to execute on the MySQL server,
the safe method is to process them all using a single connection to the
server. Here is an example that demonstrates what may be _unsafe_:

     shell> mysqlbinlog binlog.000001 | mysql -u root -p # DANGER!!
     shell> mysqlbinlog binlog.000002 | mysql -u root -p # DANGER!!

Processing binary logs this way using multiple connections to the
server causes problems if the first log file contains a *Note `CREATE
TEMPORARY TABLE': create-table. statement and the second log contains a
statement that uses the temporary table. When the first *Note `mysql':
mysql. process terminates, the server drops the temporary table. When
the second *Note `mysql': mysql.  process attempts to use the table,
the server reports `unknown table.'

To avoid problems like this, use a _single_ *Note `mysql': mysql.
process to execute the contents of all binary logs that you want to
process. Here is one way to do so:

     shell> mysqlbinlog binlog.000001 binlog.000002 | mysql -u root -p

Another approach is to write all the logs to a single file and then
process the file:

     shell> mysqlbinlog binlog.000001 >  /tmp/statements.sql
     shell> mysqlbinlog binlog.000002 >> /tmp/statements.sql
     shell> mysql -u root -p -e "source /tmp/statements.sql"

*Note `mysqlbinlog': mysqlbinlog. can produce output that reproduces a
*Note `LOAD DATA INFILE': load-data. operation without the original
data file.  *Note `mysqlbinlog': mysqlbinlog. copies the data to a
temporary file and writes a *Note `LOAD DATA LOCAL INFILE': load-data.
statement that refers to the file. The default location of the
directory where these files are written is system-specific. To specify
a directory explicitly, use the `--local-load' option.

Because *Note `mysqlbinlog': mysqlbinlog. converts *Note `LOAD DATA
INFILE': load-data. statements to *Note `LOAD DATA LOCAL INFILE':
load-data. statements (that is, it adds `LOCAL'), both the client and
the server that you use to process the statements must be configured
with the `LOCAL' capability enabled. See *Note load-data-local::.

*Warning*:

The temporary files created for *Note `LOAD DATA LOCAL': load-data.
statements are _not_ automatically deleted because they are needed
until you actually execute those statements. You should delete the
temporary files yourself after you no longer need the statement log.
The files can be found in the temporary file directory and have names
like ORIGINAL_FILE_NAME-#-#.


File: manual.info,  Node: mysqlbinlog-hexdump,  Next: mysqlbinlog-row-events,  Prev: mysqlbinlog,  Up: mysqlbinlog

4.6.7.1 `mysqlbinlog' Hex Dump Format
.....................................

The `--hexdump' option causes *Note `mysqlbinlog': mysqlbinlog. to
produce a hex dump of the binary log contents:

     shell> mysqlbinlog --hexdump master-bin.000001

The hex output consists of comment lines beginning with `#', so the
output might look like this for the preceding command:

     /*!40019 SET @@session.max_insert_delayed_threads=0*/;
     /*!50003 SET @OLD_COMPLETION_TYPE=@@COMPLETION_TYPE,COMPLETION_TYPE=0*/;
     # at 4
     #051024 17:24:13 server id 1  end_log_pos 98
     # Position  Timestamp   Type   Master ID        Size      Master Pos    Flags
     # 00000004 9d fc 5c 43   0f   01 00 00 00   5e 00 00 00   62 00 00 00   00 00
     # 00000017 04 00 35 2e 30 2e 31 35  2d 64 65 62 75 67 2d 6c |..5.0.15.debug.l|
     # 00000027 6f 67 00 00 00 00 00 00  00 00 00 00 00 00 00 00 |og..............|
     # 00000037 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00 |................|
     # 00000047 00 00 00 00 9d fc 5c 43  13 38 0d 00 08 00 12 00 |.......C.8......|
     # 00000057 04 04 04 04 12 00 00 4b  00 04 1a                |.......K...|
     #       Start: binlog v 4, server v 5.0.15-debug-log created 051024 17:24:13
     #       at startup
     ROLLBACK;

Hex dump output currently contains the elements in the following list.
This format is subject to change. (For more information about binary
log format, see MySQL Internals: The Binary Log
(http://dev.mysql.com/doc/internals/en/binary-log.html).

   * `Position': The byte position within the log file.

   * `Timestamp': The event timestamp. In the example shown, `'9d fc 5c
     43'' is the representation of `'051024 17:24:13'' in hexadecimal.

   * `Type': The event type code. In the example shown, `'0f''
     indicates a `FORMAT_DESCRIPTION_EVENT'. The following table lists
     the possible type codes.

     This table lists event type codes found in *Note `mysqlbinlog':
     mysqlbinlog.  `--hexdump' output. The table also lists the
     corresponding name and meaning for each event code type.

     Type                               Name                    Meaning
     `00'                               `UNKNOWN_EVENT'         This event should never be present in
                                                                the log.
     `01'                               `START_EVENT_V3'        This indicates the start of a log file
                                                                written by MySQL 4 or earlier.
     `02'                               `QUERY_EVENT'           The most common type of events. These
                                                                contain statements executed on the
                                                                master.
     `03'                               `STOP_EVENT'            Indicates that master has stopped.
     `04'                               `ROTATE_EVENT'          Written when the master switches to a
                                                                new log file.
     `05'                               `INTVAR_EVENT'          Used for `AUTO_INCREMENT' values or
                                                                when the `LAST_INSERT_ID()' function is
                                                                used in the statement.
     `06'                               `LOAD_EVENT'            Used for *Note `LOAD DATA INFILE':
                                                                load-data. in MySQL 3.23.
     `07'                               `SLAVE_EVENT'           Reserved for future use.
     `08'                               `CREATE_FILE_EVENT'     Used for *Note `LOAD DATA INFILE':
                                                                load-data. statements. This indicates
                                                                the start of execution of such a
                                                                statement. A temporary file is created
                                                                on the slave. Used in MySQL 4 only.
     `09'                               `APPEND_BLOCK_EVENT'    Contains data for use in a *Note `LOAD
                                                                DATA INFILE': load-data. statement. The
                                                                data is stored in the temporary file on
                                                                the slave.
     `0a'                               `EXEC_LOAD_EVENT'       Used for *Note `LOAD DATA INFILE':
                                                                load-data. statements. The contents of
                                                                the temporary file is stored in the
                                                                table on the slave.  Used in MySQL 4
                                                                only.
     `0b'                               `DELETE_FILE_EVENT'     Rollback of a *Note `LOAD DATA INFILE':
                                                                load-data. statement. The temporary file
                                                                should be deleted on the slave.
     `0c'                               `NEW_LOAD_EVENT'        Used for *Note `LOAD DATA INFILE':
                                                                load-data. in MySQL 4 and earlier.
     `0d'                               `RAND_EVENT'            Used to send information about random
                                                                values if the `RAND()' function is used
                                                                in the statement.
     `0e'                               `USER_VAR_EVENT'        Used to replicate user variables.
     `0f'                               `FORMAT_DESCRIPTION_EVENT'This indicates the start of a log file
                                                                written by MySQL 5 or later.
     `10'                               `XID_EVENT'             Event indicating commit of an XA
                                                                transaction.
     `11'                               `BEGIN_LOAD_QUERY_EVENT'Used for *Note `LOAD DATA INFILE':
                                                                load-data. statements in MySQL 5 and
                                                                later.
     `12'                               `EXECUTE_LOAD_QUERY_EVENT'Used for *Note `LOAD DATA INFILE':
                                                                load-data. statements in MySQL 5 and
                                                                later.
     `13'                               `TABLE_MAP_EVENT'       Information about a table definition.
                                                                Used in MySQL 5.1.5 and later.
     `14'                               `PRE_GA_WRITE_ROWS_EVENT'Row data for a single table that should
                                                                be created. Used in MySQL 5.1.5 to
                                                                5.1.17.
     `15'                               `PRE_GA_UPDATE_ROWS_EVENT'Row data for a single table that needs
                                                                to be updated. Used in MySQL 5.1.5 to
                                                                5.1.17.
     `16'                               `PRE_GA_DELETE_ROWS_EVENT'Row data for a single table that should
                                                                be deleted. Used in MySQL 5.1.5 to
                                                                5.1.17.
     `17'                               `WRITE_ROWS_EVENT'      Row data for a single table that should
                                                                be created. Used in MySQL 5.1.18 and
                                                                later.
     `18'                               `UPDATE_ROWS_EVENT'     Row data for a single table that needs
                                                                to be updated. Used in MySQL 5.1.18 and
                                                                later.
     `19'                               `DELETE_ROWS_EVENT'     Row data for a single table that should
                                                                be deleted. Used in MySQL 5.1.18 and
                                                                later.
     `1a'                               `INCIDENT_EVENT'        Something out of the ordinary happened.
                                                                Added in MySQL 5.1.18.

   * `Master ID': The server ID of the master that created the event.

   * `Size': The size in bytes of the event.

   * `Master Pos': The position of the next event in the original
     master log file.

   * `Flags': 16 flags. Currently, the following flags are used. The
     others are reserved for future use.

     This table lists flag values found in *Note `mysqlbinlog':
     mysqlbinlog.  `--hexdump' output. The table also provides
     corresponding names and meanings for each flag value.

     Flag                               Name                    Meaning
     `01'                               `LOG_EVENT_BINLOG_IN_USE_F'Log file correctly closed. (Used only in
                                                                `FORMAT_DESCRIPTION_EVENT'.) If this
                                                                flag is set (if the flags are, for
                                                                example, `'01 00'') in a
                                                                `FORMAT_DESCRIPTION_EVENT', the log
                                                                file has not been properly closed. Most
                                                                probably this is because of a master
                                                                crash (for example, due to power
                                                                failure).
     `02'                                                       Reserved for future use.
     `04'                               `LOG_EVENT_THREAD_SPECIFIC_F'Set if the event is dependent on the
                                                                connection it was executed in (for
                                                                example, `'04 00''), for example, if
                                                                the event uses temporary tables.
     `08'                               `LOG_EVENT_SUPPRESS_USE_F'Set in some circumstances when the
                                                                event is not dependent on the default
                                                                database.


File: manual.info,  Node: mysqlbinlog-row-events,  Prev: mysqlbinlog-hexdump,  Up: mysqlbinlog

4.6.7.2 `mysqlbinlog' Row Event Display
.......................................

The following examples illustrate how *Note `mysqlbinlog': mysqlbinlog.
displays row events that specify data modifications. These correspond
to events with the `WRITE_ROWS_EVENT', `UPDATE_ROWS_EVENT', and
`DELETE_ROWS_EVENT' type codes. The `--base64-output=DECODE-ROWS' and
`--verbose' options may be used to affect row event output.

Suppose that the server is using row-based binary logging and that you
execute the following sequence of statements:

     CREATE TABLE t
     (
       id   INT NOT NULL,
       name VARCHAR(20) NOT NULL,
       date DATE NULL
     ) ENGINE = InnoDB;

     START TRANSACTION;
     INSERT INTO t VALUES(1, 'apple', NULL);
     UPDATE t SET name = 'pear', date = '2009-01-01' WHERE id = 1;
     DELETE FROM t WHERE id = 1;
     COMMIT;

By default, *Note `mysqlbinlog': mysqlbinlog. displays row events
encoded as base-64 strings using *Note `BINLOG': binlog. statements.
Omitting extraneous lines, the output for the row events produced by the
preceding statement sequence looks like this:

     shell> mysqlbinlog LOG_FILE
     ...
     # at 218
     #080828 15:03:08 server id 1  end_log_pos 258   Write_rows: table id 17 flags: STMT_END_F

     BINLOG '
     fAS3SBMBAAAALAAAANoAAAAAABEAAAAAAAAABHRlc3QAAXQAAwMPCgIUAAQ=
     fAS3SBcBAAAAKAAAAAIBAAAQABEAAAAAAAEAA//8AQAAAAVhcHBsZQ==
     '/*!*/;
     ...
     # at 302
     #080828 15:03:08 server id 1  end_log_pos 356   Update_rows: table id 17 flags: STMT_END_F

     BINLOG '
     fAS3SBMBAAAALAAAAC4BAAAAABEAAAAAAAAABHRlc3QAAXQAAwMPCgIUAAQ=
     fAS3SBgBAAAANgAAAGQBAAAQABEAAAAAAAEAA////AEAAAAFYXBwbGX4AQAAAARwZWFyIbIP
     '/*!*/;
     ...
     # at 400
     #080828 15:03:08 server id 1  end_log_pos 442   Delete_rows: table id 17 flags: STMT_END_F

     BINLOG '
     fAS3SBMBAAAALAAAAJABAAAAABEAAAAAAAAABHRlc3QAAXQAAwMPCgIUAAQ=
     fAS3SBkBAAAAKgAAALoBAAAQABEAAAAAAAEAA//4AQAAAARwZWFyIbIP
     '/*!*/;

To see the row events as comments in the form of `pseudo-SQL'
statements, run *Note `mysqlbinlog': mysqlbinlog. with the `--verbose'
or `-v' option. The output will contain lines beginning with `###':

     shell> mysqlbinlog -v LOG_FILE
     ...
     # at 218
     #080828 15:03:08 server id 1  end_log_pos 258   Write_rows: table id 17 flags: STMT_END_F

     BINLOG '
     fAS3SBMBAAAALAAAANoAAAAAABEAAAAAAAAABHRlc3QAAXQAAwMPCgIUAAQ=
     fAS3SBcBAAAAKAAAAAIBAAAQABEAAAAAAAEAA//8AQAAAAVhcHBsZQ==
     '/*!*/;
     ### INSERT INTO test.t
     ### SET
     ###   @1=1
     ###   @2='apple'
     ###   @3=NULL
     ...
     # at 302
     #080828 15:03:08 server id 1  end_log_pos 356   Update_rows: table id 17 flags: STMT_END_F

     BINLOG '
     fAS3SBMBAAAALAAAAC4BAAAAABEAAAAAAAAABHRlc3QAAXQAAwMPCgIUAAQ=
     fAS3SBgBAAAANgAAAGQBAAAQABEAAAAAAAEAA////AEAAAAFYXBwbGX4AQAAAARwZWFyIbIP
     '/*!*/;
     ### UPDATE test.t
     ### WHERE
     ###   @1=1
     ###   @2='apple'
     ###   @3=NULL
     ### SET
     ###   @1=1
     ###   @2='pear'
     ###   @3='2009:01:01'
     ...
     # at 400
     #080828 15:03:08 server id 1  end_log_pos 442   Delete_rows: table id 17 flags: STMT_END_F

     BINLOG '
     fAS3SBMBAAAALAAAAJABAAAAABEAAAAAAAAABHRlc3QAAXQAAwMPCgIUAAQ=
     fAS3SBkBAAAAKgAAALoBAAAQABEAAAAAAAEAA//4AQAAAARwZWFyIbIP
     '/*!*/;
     ### DELETE FROM test.t
     ### WHERE
     ###   @1=1
     ###   @2='pear'
     ###   @3='2009:01:01'

Specify `--verbose' or `-v' twice to also display data types and some
metadata for each column. The output will contain an additional comment
following each column change:

     shell> mysqlbinlog -vv LOG_FILE
     ...
     # at 218
     #080828 15:03:08 server id 1  end_log_pos 258   Write_rows: table id 17 flags: STMT_END_F

     BINLOG '
     fAS3SBMBAAAALAAAANoAAAAAABEAAAAAAAAABHRlc3QAAXQAAwMPCgIUAAQ=
     fAS3SBcBAAAAKAAAAAIBAAAQABEAAAAAAAEAA//8AQAAAAVhcHBsZQ==
     '/*!*/;
     ### INSERT INTO test.t
     ### SET
     ###   @1=1 /* INT meta=0 nullable=0 is_null=0 */
     ###   @2='apple' /* VARSTRING(20) meta=20 nullable=0 is_null=0 */
     ###   @3=NULL /* VARSTRING(20) meta=0 nullable=1 is_null=1 */
     ...
     # at 302
     #080828 15:03:08 server id 1  end_log_pos 356   Update_rows: table id 17 flags: STMT_END_F

     BINLOG '
     fAS3SBMBAAAALAAAAC4BAAAAABEAAAAAAAAABHRlc3QAAXQAAwMPCgIUAAQ=
     fAS3SBgBAAAANgAAAGQBAAAQABEAAAAAAAEAA////AEAAAAFYXBwbGX4AQAAAARwZWFyIbIP
     '/*!*/;
     ### UPDATE test.t
     ### WHERE
     ###   @1=1 /* INT meta=0 nullable=0 is_null=0 */
     ###   @2='apple' /* VARSTRING(20) meta=20 nullable=0 is_null=0 */
     ###   @3=NULL /* VARSTRING(20) meta=0 nullable=1 is_null=1 */
     ### SET
     ###   @1=1 /* INT meta=0 nullable=0 is_null=0 */
     ###   @2='pear' /* VARSTRING(20) meta=20 nullable=0 is_null=0 */
     ###   @3='2009:01:01' /* DATE meta=0 nullable=1 is_null=0 */
     ...
     # at 400
     #080828 15:03:08 server id 1  end_log_pos 442   Delete_rows: table id 17 flags: STMT_END_F

     BINLOG '
     fAS3SBMBAAAALAAAAJABAAAAABEAAAAAAAAABHRlc3QAAXQAAwMPCgIUAAQ=
     fAS3SBkBAAAAKgAAALoBAAAQABEAAAAAAAEAA//4AQAAAARwZWFyIbIP
     '/*!*/;
     ### DELETE FROM test.t
     ### WHERE
     ###   @1=1 /* INT meta=0 nullable=0 is_null=0 */
     ###   @2='pear' /* VARSTRING(20) meta=20 nullable=0 is_null=0 */
     ###   @3='2009:01:01' /* DATE meta=0 nullable=1 is_null=0 */

You can tell *Note `mysqlbinlog': mysqlbinlog. to suppress the *Note
`BINLOG': binlog. statements for row events by using the
`--base64-output=DECODE-ROWS' option. This is similar to
`--base64-output=NEVER' but does not exit with an error if a row event
is found. The combination of `--base64-output=DECODE-ROWS' and
`--verbose' provides a convenient way to see row events only as SQL
statements:

     shell> mysqlbinlog -v --base64-output=DECODE-ROWS LOG_FILE
     ...
     # at 218
     #080828 15:03:08 server id 1  end_log_pos 258   Write_rows: table id 17 flags: STMT_END_F
     ### INSERT INTO test.t
     ### SET
     ###   @1=1
     ###   @2='apple'
     ###   @3=NULL
     ...
     # at 302
     #080828 15:03:08 server id 1  end_log_pos 356   Update_rows: table id 17 flags: STMT_END_F
     ### UPDATE test.t
     ### WHERE
     ###   @1=1
     ###   @2='apple'
     ###   @3=NULL
     ### SET
     ###   @1=1
     ###   @2='pear'
     ###   @3='2009:01:01'
     ...
     # at 400
     #080828 15:03:08 server id 1  end_log_pos 442   Delete_rows: table id 17 flags: STMT_END_F
     ### DELETE FROM test.t
     ### WHERE
     ###   @1=1
     ###   @2='pear'
     ###   @3='2009:01:01'

*Note*:

You should not suppress *Note `BINLOG': binlog.  statements if you
intend to re-execute *Note `mysqlbinlog': mysqlbinlog. output.

The SQL statements produced by `--verbose' for row events are much more
readable than the corresponding *Note `BINLOG': binlog. statements.
However, they do not correspond exactly to the original SQL statements
that generated the events. The following limitations apply:

   * The original column names are lost and replaced by `@N', where N
     is a column number.

   * Character set information is not available in the binary log,
     which affects string column display:

        * There is no distinction made between corresponding binary and
          nonbinary string types (*Note `BINARY': binary-varbinary. and
          *Note `CHAR': char, *Note `VARBINARY': binary-varbinary. and
          *Note `VARCHAR': char, *Note `BLOB': blob. and *Note `TEXT':
          blob.). The output uses a data type of `STRING' for
          fixed-length strings and `VARSTRING' for variable-length
          strings.

        * For multi-byte character sets, the maximum number of bytes
          per character is not present in the binary log, so the length
          for string types is displayed in bytes rather than in
          characters. For example, `STRING(4)' will be used as the data
          type for values from either of these column types:

               CHAR(4) CHARACTER SET latin1
               CHAR(2) CHARACTER SET ucs2

        * Due to the storage format for events of type
          `UPDATE_ROWS_EVENT', *Note `UPDATE': update. statements are
          displayed with the `WHERE' clause preceding the `SET' clause.

Proper interpretation of row events requires the information from the
format description event at the beginning of the binary log. Because
*Note `mysqlbinlog': mysqlbinlog. does not know in advance whether the
rest of the log contains row events, by default it displays the format
description event using a *Note `BINLOG': binlog. statement in the
initial part of the output.

If the binary log is known not to contain any events requiring a *Note
`BINLOG': binlog. statement (that is, no row events), the
`--base64-output=NEVER' option can be used to prevent this header from
being written.


File: manual.info,  Node: mysqldumpslow,  Next: mysqlhotcopy,  Prev: mysqlbinlog,  Up: programs-admin-utils

4.6.8 `mysqldumpslow' -- Summarize Slow Query Log Files
-------------------------------------------------------

The MySQL slow query log contains information about queries that take a
long time to execute (see *Note slow-query-log::).  *Note
`mysqldumpslow': mysqldumpslow. parses MySQL slow query log files and
prints a summary of their contents.

Normally, *Note `mysqldumpslow': mysqldumpslow. groups queries that are
similar except for the particular values of number and string data
values. It `abstracts' these values to `N' and `'S'' when displaying
summary output. The `-a' and `-n' options can be used to modify value
abstracting behavior.

Invoke *Note `mysqldumpslow': mysqldumpslow. like this:

     shell> mysqldumpslow [OPTIONS] [LOG_FILE ...]

*Note `mysqldumpslow': mysqldumpslow. supports the following options.

*`mysqldumpslow' Options*

Format      Option File Description
-a                      Do not abstract all numbers
                        to N and strings to S
-n num                  Abstract numbers with at
                        least the specified digits
-debug      debug       Write debugging information
-g pattern              Only consider statements
                        that match the pattern
-help                   Display help message and exit
-h name                 Host name of the server in
                        the log file name
-i name                 Name of the server instance
-l                      Do not subtract lock time
                        from total time
-r                      Reverse the sort order
-s value                How to sort output
-t num                  Display only first num
                        queries
-verbose    verbose     Verbose mode

   *  `--help'

     Display a help message and exit.

   *  `-a'

     Do not abstract all numbers to `N' and strings to `'S''.

   *  `--debug', `-d'

     Run in debug mode.

   *  `-g PATTERN'

     Consider only queries that match the (`grep'-style) pattern.

   *  `-h HOST_NAME'

     Host name of MySQL server for `*-slow.log' file name. The value can
     contain a wildcard. The default is `*' (match all).

   *  `-i NAME'

     Name of server instance (if using *Note `mysql.server':
     mysql-server. startup script).

   *  `-l'

     Do not subtract lock time from total time.

   *  `-n N'

     Abstract numbers with at least N digits within names.

   *  `-r'

     Reverse the sort order.

   *  `-s SORT_TYPE'

     How to sort the output. The value of SORT_TYPE should be chosen
     from the following list:

        * `t', `at': Sort by query time or average query time

        * `l', `al': Sort by lock time or average lock time

        * `r', `ar': Sort by rows sent or average rows sent

        * `c': Sort by count

     By default, *Note `mysqldumpslow': mysqldumpslow. sorts by average
     query time (equivalent to `-s at').

   *  `-t N'

     Display only the first N queries in the output.

   *  `--verbose', `-v'

     Verbose mode. Print more information about what the program does.

Example of usage:

     shell> mysqldumpslow

     Reading mysql slow query log from /usr/local/mysql/data/mysqld51-apple-slow.log
     Count: 1  Time=4.32s (4s)  Lock=0.00s (0s)  Rows=0.0 (0), root[root]@localhost
      insert into t2 select * from t1

     Count: 3  Time=2.53s (7s)  Lock=0.00s (0s)  Rows=0.0 (0), root[root]@localhost
      insert into t2 select * from t1 limit N

     Count: 3  Time=2.13s (6s)  Lock=0.00s (0s)  Rows=0.0 (0), root[root]@localhost
      insert into t1 select * from t1


File: manual.info,  Node: mysqlhotcopy,  Next: mysql-convert-table-format,  Prev: mysqldumpslow,  Up: programs-admin-utils

4.6.9 `mysqlhotcopy' -- A Database Backup Program
-------------------------------------------------

*Note `mysqlhotcopy': mysqlhotcopy. is a Perl script that was
originally written and contributed by Tim Bunce. It uses *Note `FLUSH
TABLES': flush, *Note `LOCK TABLES': lock-tables, and `cp' or `scp' to
make a database backup. It is a fast way to make a backup of the
database or single tables, but it can be run only on the same machine
where the database directories are located.  *Note `mysqlhotcopy':
mysqlhotcopy. works only for backing up `MyISAM' and `ARCHIVE' tables.
It runs on Unix.

To use *Note `mysqlhotcopy': mysqlhotcopy, you must have read access to
the files for the tables that you are backing up, the `SELECT'
privilege for those tables, the `RELOAD' privilege (to be able to
execute *Note `FLUSH TABLES': flush.), and the `LOCK TABLES' privilege
(to be able to lock the tables).

     shell> mysqlhotcopy DB_NAME [/PATH/TO/NEW_DIRECTORY]

     shell> mysqlhotcopy DB_NAME_1 ... DB_NAME_N /PATH/TO/NEW_DIRECTORY

Back up tables in the given database that match a regular expression:

     shell> mysqlhotcopy DB_NAME./REGEX/

The regular expression for the table name can be negated by prefixing
it with a tilde (``~''):

     shell> mysqlhotcopy DB_NAME./~REGEX/

*Note `mysqlhotcopy': mysqlhotcopy. supports the following options,
which can be specified on the command line or in the `[mysqlhotcopy]'
and `[client]' groups of an option file. For information about option
files, see *Note option-files::.

*`mysqlhotcopy' Options*

Format      Option File Description                   Introduced
-addtodest  addtodest   Do not rename target          
                        directory (if it exists);     
                        merely add files to it        
-allowold   allowold    Do not abort if a target      
                        exists; rename it by adding   
                        an _old suffix                
-checkpoint=db_name.tbl_namecheckpoint  Insert checkpoint entries     
-chroot=pathchroot      Base directory of the chroot  
                        jail in which mysqld operates 
-debug      debug       Write a debugging log         
-dryrun     dryrun      Report actions without        
                        performing them               
-flushlog   flushlog    Flush logs after all tables   
                        are locked                    
-help                   Display help message and exit 
-host=host_namehost        Connect to the MySQL server   
                        on the given host             
-keepold    keepold     Do not delete previous        
                        (renamed) target when done    
-method     method      The method for copying files  
-noindices  noindices   Do not include full index     
                        files in the backup           
-old_server old_server  Connect to server that does   5.5.3
                        not support FLUSH TABLES      
                        tbl_list WITH READ LOCK       
-password[=password]password    The password to use when      
                        connecting to the server      
-port=port_numport        The TCP/IP port number to     
                        use for the connection        
-quiet      quiet       Be silent except for errors   
-regexp     regexp      Copy all databases with       
                        names that match the given    
                        regular expression            
-resetmasterresetmaster Reset the binary log after    
                        locking all the tables        
-resetslave resetslave  Reset the master.info file    
                        after locking all the tables  
-socket=pathsocket      For connections to localhost  
-tmpdir=pathtmpdir      The temporary directory       
-user=user_name,user        MySQL user name to use when   
                        connecting to server          

   *  `--help', `-?'

     Display a help message and exit.

   *  `--addtodest'

     Do not rename target directory (if it exists); merely add files to
     it.

   *  `--allowold'

     Do not abort if a target exists; rename it by adding an `_old'
     suffix.

   *  `--checkpoint=DB_NAME.TBL_NAME'

     Insert checkpoint entries into the specified database DB_NAME and
     table TBL_NAME.

   *  `--chroot=PATH'

     Base directory of the `chroot' jail in which *Note `mysqld':
     mysqld. operates. The PATH value should match that of the
     `--chroot' option given to *Note `mysqld': mysqld.

   *  `--debug'

     Enable debug output.

   *  `--dryrun', `-n'

     Report actions without performing them.

   *  `--flushlog'

     Flush logs after all tables are locked.

   *  `--host=HOST_NAME', `-h HOST_NAME'

     The host name of the local host to use for making a TCP/IP
     connection to the local server. By default, the connection is made
     to `localhost' using a Unix socket file.

   *  `--keepold'

     Do not delete previous (renamed) target when done.

   *  `--method=COMMAND'

     The method for copying files (`cp' or `scp'). The default is `cp'.

   *  `--noindices'

     Do not include full index files for *Note `MyISAM':
     myisam-storage-engine. tables in the backup.  This makes the
     backup smaller and faster. The indexes for reloaded tables can be
     reconstructed later with *Note `myisamchk -rq': myisamchk.

   *  `--password=PASSWORD', `-pPASSWORD'

     The password to use when connecting to the server. The password
     value is not optional for this option, unlike for other MySQL
     programs.

     Specifying a password on the command line should be considered
     insecure. See *Note password-security-user::. You can use an
     option file to avoid giving the password on the command line.

   *  `--port=PORT_NUM', `-P PORT_NUM'

     The TCP/IP port number to use when connecting to the local server.

   *  `--old_server'

     As of MySQL 5.5.3, *Note `mysqlhotcopy': mysqlhotcopy. uses *Note
     `FLUSH TABLES TBL_LIST WITH READ LOCK': flush.  to flush and lock
     tables. Use the `--old_server' option if the server is older than
     5.5.3, which is when that statement was introduced. This option
     was added in MySQL 5.5.3.

   *  `--quiet', `-q'

     Be silent except for errors.

   *  `--record_log_pos=DB_NAME.TBL_NAME'

     Record master and slave status in the specified database DB_NAME
     and table TBL_NAME.

   *  `--regexp=EXPR'

     Copy all databases with names that match the given regular
     expression.

   *  `--resetmaster'

     Reset the binary log after locking all the tables.

   *  `--resetslave'

     Reset the `master.info' file after locking all the tables.

   *  `--socket=PATH', `-S PATH'

     The Unix socket file to use for connections to `localhost'.

   *  `--suffix=STR'

     The suffix to use for names of copied databases.

   *  `--tmpdir=PATH'

     The temporary directory. The default is `/tmp'.

   *  `--user=USER_NAME', `-u USER_NAME'

     The MySQL user name to use when connecting to the server.

Use `perldoc' for additional *Note `mysqlhotcopy': mysqlhotcopy.
documentation, including information about the structure of the tables
needed for the `--checkpoint' and `--record_log_pos' options:

     shell> perldoc mysqlhotcopy


File: manual.info,  Node: mysql-convert-table-format,  Next: mysql-find-rows,  Prev: mysqlhotcopy,  Up: programs-admin-utils

4.6.10 `mysql_convert_table_format' -- Convert Tables to Use a Given Storage Engine
-----------------------------------------------------------------------------------

*Note `mysql_convert_table_format': mysql-convert-table-format.
converts the tables in a database to use a particular storage engine
(`MyISAM' by default).  *Note `mysql_convert_table_format':
mysql-convert-table-format. is written in Perl and requires that the
`DBI' and `DBD::mysql' Perl modules be installed (see *Note
perl-support::).

Invoke *Note `mysql_convert_table_format': mysql-convert-table-format.
like this:

     shell> mysql_convert_table_format [OPTIONS]DB_NAME

The DB_NAME argument indicates the database containing the tables to be
converted.

*Note `mysql_convert_table_format': mysql-convert-table-format.
supports the options described in the following list.

   *  `--help'

     Display a help message and exit.

   *  `--force'

     Continue even if errors occur.

   *  `--host=HOST_NAME'

     Connect to the MySQL server on the given host.

   *  `--password=PASSWORD'

     The password to use when connecting to the server. Note that the
     password value is not optional for this option, unlike for other
     MySQL programs.

     Specifying a password on the command line should be considered
     insecure. See *Note password-security-user::. You can use an
     option file to avoid giving the password on the command line.

   *  `--port=PORT_NUM'

     The TCP/IP port number to use for the connection.

   *  `--socket=PATH'

     For connections to `localhost', the Unix socket file to use.

   *  `--type=ENGINE_NAME'

     Specify the storage engine that the tables should be converted to
     use. The default is `MyISAM' if this option is not given.

   *  `--user=USER_NAME'

     The MySQL user name to use when connecting to the server.

   *  `--verbose'

     Verbose mode. Print more information about what the program does.

   *  `--version'

     Display version information and exit.


File: manual.info,  Node: mysql-find-rows,  Next: mysql-fix-extensions,  Prev: mysql-convert-table-format,  Up: programs-admin-utils

4.6.11 `mysql_find_rows' -- Extract SQL Statements from Files
-------------------------------------------------------------

*Note `mysql_find_rows': mysql-find-rows. reads files containing SQL
statements and extracts statements that match a given regular
expression or that contain `USE DB_NAME' or *Note `SET': set-statement.
statements. The utility expects statements to be terminated with
semicolon (`;') characters.

Invoke *Note `mysql_find_rows': mysql-find-rows. like this:

     shell> mysql_find_rows [OPTIONS] [FILE_NAME ...]

Each FILE_NAME argument should be the name of file containing SQL
statements. If no file names are given, *Note `mysql_find_rows':
mysql-find-rows. reads the standard input.

Examples:

     mysql_find_rows --regexp=problem_table --rows=20 < update.log
     mysql_find_rows --regexp=problem_table  update-log.1 update-log.2

*Note `mysql_find_rows': mysql-find-rows. supports the following
options:

   *  `--help', `--Information'

     Display a help message and exit.

   *  `--regexp=PATTERN'

     Display queries that match the pattern.

   *  `--rows=N'

     Quit after displaying N queries.

   *  `--skip-use-db'

     Do not include `USE DB_NAME' statements in the output.

   *  `--start_row=N'

     Start output from this row.


File: manual.info,  Node: mysql-fix-extensions,  Next: mysql-setpermission,  Prev: mysql-find-rows,  Up: programs-admin-utils

4.6.12 `mysql_fix_extensions' -- Normalize Table File Name Extensions
---------------------------------------------------------------------

*Note `mysql_fix_extensions': mysql-fix-extensions. converts the
extensions for `MyISAM' (or `ISAM') table files to their canonical
forms. It looks for files with extensions matching any lettercase
variant of `.frm', `.myd', `.myi', `.isd', and `.ism' and renames them
to have extensions of `.frm', `.MYD', `.MYI', `.ISD', and `.ISM',
respectively. This can be useful after transferring the files from a
system with case-insensitive file names (such as Windows) to a system
with case-sensitive file names.

Invoke *Note `mysql_fix_extensions': mysql-fix-extensions. like this,
where DATA_DIR is the path name to the MySQL data directory.

     shell> mysql_fix_extensions DATA_DIR


File: manual.info,  Node: mysql-setpermission,  Next: mysql-waitpid,  Prev: mysql-fix-extensions,  Up: programs-admin-utils

4.6.13 `mysql_setpermission' -- Interactively Set Permissions in Grant Tables
-----------------------------------------------------------------------------

*Note `mysql_setpermission': mysql-setpermission. is a Perl script that
was originally written and contributed by Luuk de Boer. It
interactively sets permissions in the MySQL grant tables.  *Note
`mysql_setpermission': mysql-setpermission. is written in Perl and
requires that the `DBI' and `DBD::mysql' Perl modules be installed (see
*Note perl-support::).

Invoke *Note `mysql_setpermission': mysql-setpermission. like this:

     shell> mysql_setpermission [OPTIONS]

OPTIONS should be either `--help' to display the help message, or
options that indicate how to connect to the MySQL server. The account
used when you connect determines which permissions you have when
attempting to modify existing permissions in the grant tables.

`mysql_setpermissions' also reads options from the `[client]' and
`[perl]' groups in the `.my.cnf' file in your home directory, if the
file exists.

*Note `mysql_setpermission': mysql-setpermission. supports the following
options:

   *  `--help'

     Display a help message and exit.

   *  `--host=HOST_NAME'

     Connect to the MySQL server on the given host.

   *  `--password=PASSWORD'

     The password to use when connecting to the server. Note that the
     password value is not optional for this option, unlike for other
     MySQL programs.

     Specifying a password on the command line should be considered
     insecure. See *Note password-security-user::. You can use an
     option file to avoid giving the password on the command line.

   *  `--port=PORT_NUM'

     The TCP/IP port number to use for the connection.

   *  `--socket=PATH'

     For connections to `localhost', the Unix socket file to use.

   *  `--user=USER_NAME'

     The MySQL user name to use when connecting to the server.


File: manual.info,  Node: mysql-waitpid,  Next: mysql-zap,  Prev: mysql-setpermission,  Up: programs-admin-utils

4.6.14 `mysql_waitpid' -- Kill Process and Wait for Its Termination
-------------------------------------------------------------------

*Note `mysql_waitpid': mysql-waitpid. signals a process to terminate
and waits for the process to exit. It uses the `kill()' system call and
Unix signals, so it runs on Unix and Unix-like systems.

Invoke *Note `mysql_waitpid': mysql-waitpid. like this:

     shell> mysql_waitpid [OPTIONS] PID WAIT_TIME

*Note `mysql_waitpid': mysql-waitpid. sends signal 0 to the process
identified by PID and waits up to WAIT_TIME seconds for the process to
terminate. PID and WAIT_TIME must be positive integers.

If process termination occurs within the wait time or the process does
not exist, *Note `mysql_waitpid': mysql-waitpid. returns 0. Otherwise,
it returns 1.

If the `kill()' system call cannot handle signal 0, `mysql_waitpid()'
uses signal 1 instead.

*Note `mysql_waitpid': mysql-waitpid. supports the following options:

   *  `--help', `-?', `-I'

     Display a help message and exit.

   *  `--verbose', `-v'

     Verbose mode. Display a warning if signal 0 could not be used and
     signal 1 is used instead.

   *  `--version', `-V'

     Display version information and exit.


File: manual.info,  Node: mysql-zap,  Prev: mysql-waitpid,  Up: programs-admin-utils

4.6.15 `mysql_zap' -- Kill Processes That Match a Pattern
---------------------------------------------------------

*Note `mysql_zap': mysql-zap. kills processes that match a pattern. It
uses the `ps' command and Unix signals, so it runs on Unix and
Unix-like systems.

Invoke *Note `mysql_zap': mysql-zap. like this:

     shell> mysql_zap [-SIGNAL] [-?Ift] PATTERN

A process matches if its output line from the `ps' command contains the
pattern. By default, *Note `mysql_zap': mysql-zap. asks for
confirmation for each process. Respond `y' to kill the process, or `q'
to exit *Note `mysql_zap': mysql-zap. For any other response, *Note
`mysql_zap': mysql-zap. does not attempt to kill the process.

If the `-SIGNAL' option is given, it specifies the name or number of
the signal to send to each process. Otherwise, *Note `mysql_zap':
mysql-zap.  tries first with `TERM' (signal 15) and then with *Note
`KILL': kill. (signal 9).

*Note `mysql_zap': mysql-zap. supports the following additional options:

   *  `--help', `-?', `-I'

     Display a help message and exit.

   *  `-f'

     Force mode. *Note `mysql_zap': mysql-zap. attempts to kill each
     process without confirmation.

   *  `-t'

     Test mode. Display information about each process but do not kill
     it.


File: manual.info,  Node: programs-development,  Next: programs-miscellaneous,  Prev: programs-admin-utils,  Up: programs

4.7 MySQL Program Development Utilities
=======================================

* Menu:

* msql2mysql::                   `msql2mysql' --- Convert mSQL Programs for Use with MySQL
* mysql-config::                 `mysql_config' --- Display Options for Compiling Clients
* my-print-defaults::            `my_print_defaults' --- Display Options from Option Files
* resolve-stack-dump::           `resolve_stack_dump' --- Resolve Numeric Stack Trace Dump to Symbols

This section describes some utilities that you may find useful when
developing MySQL programs.

In shell scripts, you can use the *Note `my_print_defaults':
my-print-defaults. program to parse option files and see what options
would be used by a given program. The following example shows the
output that *Note `my_print_defaults': my-print-defaults.  might
produce when asked to show the options found in the `[client]' and
`[mysql]' groups:

     shell> my_print_defaults client mysql
     --port=3306
     --socket=/tmp/mysql.sock
     --no-auto-rehash

Note for developers: Option file handling is implemented in the C
client library simply by processing all options in the appropriate
group or groups before any command-line arguments. This works well for
programs that use the last instance of an option that is specified
multiple times. If you have a C or C++ program that handles multiply
specified options this way but that doesn't read option files, you need
add only two lines to give it that capability. Check the source code of
any of the standard MySQL clients to see how to do this.

Several other language interfaces to MySQL are based on the C client
library, and some of them provide a way to access option file contents.
These include Perl and Python. For details, see the documentation for
your preferred interface.


File: manual.info,  Node: msql2mysql,  Next: mysql-config,  Prev: programs-development,  Up: programs-development

4.7.1 `msql2mysql' -- Convert mSQL Programs for Use with MySQL
--------------------------------------------------------------

Initially, the MySQL C API was developed to be very similar to that for
the mSQL database system. Because of this, mSQL programs often can be
converted relatively easily for use with MySQL by changing the names of
the C API functions.

The *Note `msql2mysql': msql2mysql. utility performs the conversion of
mSQL C API function calls to their MySQL equivalents. *Note
`msql2mysql': msql2mysql. converts the input file in place, so make a
copy of the original before converting it. For example, use *Note
`msql2mysql': msql2mysql. like this:

     shell> cp client-prog.c client-prog.c.orig
     shell> msql2mysql client-prog.c
     client-prog.c converted

Then examine `client-prog.c' and make any post-conversion revisions
that may be necessary.

*Note `msql2mysql': msql2mysql. uses the *Note `replace':
replace-utility. utility to make the function name substitutions. See
*Note replace-utility::.


File: manual.info,  Node: mysql-config,  Next: my-print-defaults,  Prev: msql2mysql,  Up: programs-development

4.7.2 `mysql_config' -- Display Options for Compiling Clients
-------------------------------------------------------------

*Note `mysql_config': mysql-config. provides you with useful
information for compiling your MySQL client and connecting it to MySQL.
It is a shell script, so it is available only on Unix and Unix-like
systems.

*Note `mysql_config': mysql-config. supports the following options.

   *  `--cflags'

     Compiler flags to find include files and critical compiler flags
     and defines used when compiling the `libmysqlclient' library. The
     options returned are tied to the specific compiler that was used
     when the library was created and might clash with the settings for
     your own compiler. Use `--include' for more portable options that
     contain only include paths.

   *  `--include'

     Compiler options to find MySQL include files.

   *  `--libmysqld-libs', `--embedded'

     Libraries and options required to link with the MySQL embedded
     server.

   *  `--libs'

     Libraries and options required to link with the MySQL client
     library.

   *  `--libs_r'

     Libraries and options required to link with the thread-safe MySQL
     client library. In MySQL 5.5, all client libraries are
     thread-safe, so this option need not be used.  The `--libs' option
     can be used in all cases.

   *  `--plugindir'

     The default plugin directory path name, defined when configuring
     MySQL.

   *  `--port'

     The default TCP/IP port number, defined when configuring MySQL.

   *  `--socket'

     The default Unix socket file, defined when configuring MySQL.

   *  `--version'

     Version number for the MySQL distribution.

If you invoke *Note `mysql_config': mysql-config. with no options, it
displays a list of all options that it supports, and their values:

     shell> mysql_config
     Usage: /usr/local/mysql/bin/mysql_config [options]
     Options:
       --cflags         [-I/usr/local/mysql/include/mysql -mcpu=pentiumpro]
       --include        [-I/usr/local/mysql/include/mysql]
       --libs           [-L/usr/local/mysql/lib/mysql -lmysqlclient
                         -lpthread -lm -lrt -lssl -lcrypto -ldl]
       --libs_r         [-L/usr/local/mysql/lib/mysql -lmysqlclient_r
                         -lpthread -lm -lrt -lssl -lcrypto -ldl]
       --socket         [/tmp/mysql.sock]
       --port           [3306]
       --version        [5.5.31]
       --libmysqld-libs [-L/usr/local/mysql/lib/mysql -lmysqld
                         -lpthread -lm -lrt -lssl -lcrypto -ldl -lcrypt]

You can use *Note `mysql_config': mysql-config. within a command line
using backticks to include the output that it produces for a particular
option. For example, to compile and link a MySQL client program, use
*Note `mysql_config': mysql-config. as follows:

     shell> gcc -c `mysql_config --cflags` progname.c
     shell> gcc -o progname progname.o `mysql_config --libs`


File: manual.info,  Node: my-print-defaults,  Next: resolve-stack-dump,  Prev: mysql-config,  Up: programs-development

4.7.3 `my_print_defaults' -- Display Options from Option Files
--------------------------------------------------------------

*Note `my_print_defaults': my-print-defaults. displays the options that
are present in option groups of option files. The output indicates what
options will be used by programs that read the specified option groups.
For example, the *Note `mysqlcheck': mysqlcheck. program reads the
`[mysqlcheck]' and `[client]' option groups. To see what options are
present in those groups in the standard option files, invoke *Note
`my_print_defaults': my-print-defaults. like this:

     shell> my_print_defaults mysqlcheck client
     --user=myusername
     --password=secret
     --host=localhost

The output consists of options, one per line, in the form that they
would be specified on the command line.

*Note `my_print_defaults': my-print-defaults. supports the following
options.

   *  `--help', `-?'

     Display a help message and exit.

   *  `--config-file=FILE_NAME',

     `--defaults-file=FILE_NAME', `-c FILE_NAME'

     Read only the given option file.

   *  `--debug=DEBUG_OPTIONS', `-# DEBUG_OPTIONS'

     Write a debugging log. A typical DEBUG_OPTIONS string is
     `'d:t:o,FILE_NAME''.  The default is
     `'d:t:o,/tmp/my_print_defaults.trace''.

   *  `--defaults-extra-file=FILE_NAME',

     `--extra-file=FILE_NAME', `-e FILE_NAME'

     Read this option file after the global option file but (on Unix)
     before the user option file.

   *  `--defaults-group-suffix=SUFFIX', `-g SUFFIX'

     In addition to the groups named on the command line, read groups
     that have the given suffix.

   *  `--no-defaults', `-n'

     Return an empty string.

   *  `--verbose', `-v'

     Verbose mode. Print more information about what the program does.

   *  `--version', `-V'

     Display version information and exit.


File: manual.info,  Node: resolve-stack-dump,  Prev: my-print-defaults,  Up: programs-development

4.7.4 `resolve_stack_dump' -- Resolve Numeric Stack Trace Dump to Symbols
-------------------------------------------------------------------------

*Note `resolve_stack_dump': resolve-stack-dump. resolves a numeric stack
dump to symbols.

Invoke *Note `resolve_stack_dump': resolve-stack-dump. like this:

     shell> resolve_stack_dump [OPTIONS] SYMBOLS_FILE [NUMERIC_DUMP_FILE]

The symbols file should include the output from the `nm --numeric-sort
mysqld' command. The numeric dump file should contain a numeric stack
track from *Note `mysqld': mysqld. If no numeric dump file is named on
the command line, the stack trace is read from the standard input.

*Note `resolve_stack_dump': resolve-stack-dump. supports the following
options.

   *  `--help', `-h'

     Display a help message and exit.

   *  `--numeric-dump-file=FILE_NAME', `-n FILE_NAME'

     Read the stack trace from the given file.

   *  `--symbols-file=FILE_NAME', `-s FILE_NAME'

     Use the given symbols file.

   *  `--version', `-V'

     Display version information and exit.

For more information, see *Note using-stack-trace::.


File: manual.info,  Node: programs-miscellaneous,  Prev: programs-development,  Up: programs

4.8 Miscellaneous Programs
==========================

* Menu:

* perror::                       `perror' --- Explain Error Codes
* replace-utility::              `replace' --- A String-Replacement Utility
* resolveip::                    `resolveip' --- Resolve Host name to IP Address or Vice Versa


File: manual.info,  Node: perror,  Next: replace-utility,  Prev: programs-miscellaneous,  Up: programs-miscellaneous

4.8.1 `perror' -- Explain Error Codes
-------------------------------------

For most system errors, MySQL displays, in addition to an internal text
message, the system error code in one of the following styles:

     message ... (errno: #)
     message ... (Errcode: #)

You can find out what the error code means by examining the
documentation for your system or by using the *Note `perror': perror.
utility.

*Note `perror': perror. prints a description for a system error code or
for a storage engine (table handler) error code.

Invoke *Note `perror': perror. like this:

     shell> perror [OPTIONS] ERRORCODE ...

Example:

     shell> perror 13 64
     OS error code  13:  Permission denied
     OS error code  64:  Machine is not on the network

To obtain the error message for a MySQL Cluster error code, invoke
*Note `perror': perror. with the `--ndb' option:

     shell> perror --ndb ERRORCODE

Note that the meaning of system error messages may be dependent on your
operating system. A given error code may mean different things on
different operating systems.

*Note `perror': perror. supports the following options.

   *  `--help', `--info', `-I', `-?'

     Display a help message and exit.

   *  `--ndb'

     Print the error message for a MySQL Cluster error code.

   *  `--silent', `-s'

     Silent mode. Print only the error message.

   *  `--verbose', `-v'

     Verbose mode. Print error code and message. This is the default
     behavior.

   *  `--version', `-V'

     Display version information and exit.


File: manual.info,  Node: replace-utility,  Next: resolveip,  Prev: perror,  Up: programs-miscellaneous

4.8.2 `replace' -- A String-Replacement Utility
-----------------------------------------------

The *Note `replace': replace-utility. utility program changes strings
in place in files or on the standard input.

Invoke *Note `replace': replace-utility. in one of the following ways:

     shell> replace FROM TO [FROM TO] ... -- FILE_NAME [FILE_NAME] ...
     shell> replace FROM TO [FROM TO] ... < FILE_NAME

FROM represents a string to look for and TO represents its replacement.
There can be one or more pairs of strings.

Use the `--' option to indicate where the string-replacement list ends
and the file names begin. In this case, any file named on the command
line is modified in place, so you may want to make a copy of the
original before converting it. REPLACE prints a message indicating
which of the input files it actually modifies.

If the `--' option is not given, *Note `replace': replace-utility.
reads the standard input and writes to the standard output.

*Note `replace': replace-utility. uses a finite state machine to match
longer strings first. It can be used to swap strings. For example, the
following command swaps `a' and `b' in the given files, `file1' and
`file2':

     shell> replace a b b a -- file1 file2 ...

The *Note `replace': replace-utility. program is used by *Note
`msql2mysql': msql2mysql. See *Note msql2mysql::.

*Note `replace': replace-utility. supports the following options.

   *  `-?', `-I'

     Display a help message and exit.

   *  `-#DEBUG_OPTIONS'

     Enable debugging.

   *  `-s'

     Silent mode. Print less information what the program does.

   *  `-v'

     Verbose mode. Print more information about what the program does.

   *  `-V'

     Display version information and exit.


File: manual.info,  Node: resolveip,  Prev: replace-utility,  Up: programs-miscellaneous

4.8.3 `resolveip' -- Resolve Host name to IP Address or Vice Versa
------------------------------------------------------------------

The *Note `resolveip': resolveip. utility resolves host names to IP
addresses and vice versa.

Invoke *Note `resolveip': resolveip. like this:

     shell> resolveip [OPTIONS] {HOST_NAME|IP-ADDR} ...

*Note `resolveip': resolveip. supports the following options.

   *  `--help', `--info', `-?', `-I'

     Display a help message and exit.

   *  `--silent', `-s'

     Silent mode. Produce less output.

   *  `--version', `-V'

     Display version information and exit.


File: manual.info,  Node: server-administration,  Next: security,  Prev: programs,  Up: Top

5 MySQL Server Administration
*****************************

* Menu:

* mysqld-server::                The MySQL Server
* server-logs::                  MySQL Server Logs
* multiple-servers::             Running Multiple MySQL Instances on One Machine
* dba-dtrace-server::            Tracing `mysqld' Using DTrace

MySQL Server (*Note `mysqld': mysqld.) is the main program that does
most of the work in a MySQL installation. This chapter provides an
overview of MySQL Server and covers general server administration:

   * Server configuration.

   * The server log files.

   * Management of multiple servers on a single machine.

For additional information on administrative topics, see also:

   * *Note security::

   * *Note backup-and-recovery::

   * *Note replication::


File: manual.info,  Node: mysqld-server,  Next: server-logs,  Prev: server-administration,  Up: server-administration

5.1 The MySQL Server
====================

* Menu:

* mysqld-option-tables::         Server Option and Variable Reference
* server-configuration-defaults::  Server Configuration Defaults
* server-options::               Server Command Options
* server-system-variables::      Server System Variables
* using-system-variables::       Using System Variables
* server-status-variables::      Server Status Variables
* server-sql-mode::              Server SQL Modes
* server-plugins::               Server Plugins
* ipv6-support::                 IPv6 Support
* server-side-help-support::     Server-Side Help
* server-signal-response::       Server Response to Signals
* server-shutdown::              The Shutdown Process

*Note `mysqld': mysqld. is the MySQL server. The following discussion
covers these MySQL server configuration topics:

   * Startup options that the server supports. You can specify these
     options on the command line, through configuration files, or both.

   * Server system variables. These variables reflect the current state
     and values of the startup options, some of which can be modified
     while the server is running.

   * Server status variables. These variables contain counters and
     statistics about runtime operation.

   * How to set the server SQL mode. This setting modifies certain
     aspects of SQL syntax and semantics, for example for compatibility
     with code from other database systems, or to control the error
     handling for particular situations.

   * The server shutdown process. There are performance and reliability
     considerations depending on the type of table (transactional or
     nontransactional) and whether you use replication.

*Note*:

Not all storage engines are supported by all MySQL server binaries and
configurations. To find out how to determine which storage engines your
MySQL server installation supports, see *Note show-engines::.


File: manual.info,  Node: mysqld-option-tables,  Next: server-configuration-defaults,  Prev: mysqld-server,  Up: mysqld-server

5.1.1 Server Option and Variable Reference
------------------------------------------

The following table provides a list of all the command line options,
server and status variables applicable within `mysqld'.

The table lists command-line options (Cmd-line), options valid in
configuration files (Option file), server system variables (System
Var), and status variables (Status var) in one unified list, with
notification of where each option/variable is valid. If a server option
set on the command line or in an option file differs from the name of
the corresponding server system or status variable, the variable name
is noted immediately below the corresponding option. For status
variables, the scope of the variable is shown (Scope) as either global,
session, or both. Please see the corresponding sections for details on
setting and using the options and variables. Where appropriate, a
direct link to further information on the item as available.

For a version of this table that is specific to MySQL Cluster, see
*Note mysql-cluster-option-tables::.

*Option/Variable Summary*

Name           Cmd-Line    Option file System Var  Status Var  Var Scope   Dynamic
abort-slave-event-countYes         Yes                                             
Aborted_clients                                    Yes         Global      No
Aborted_connects                                    Yes         Global      No
allow-suspicious-udfsYes         Yes                                             
ansi           Yes         Yes                                             
audit-log      Yes         Yes                                             
audit_log_buffer_size                        Yes                     Global      No
audit_log_file                         Yes                     Global      No
audit_log_flush                        Yes                     Global      Yes
audit_log_policy                        Yes                     Global      Yes
audit_log_rotate_on_size                        Yes                     Global      Yes
audit_log_strategy                        Yes                     Global      No
authentication_windows_log_levelYes         Yes                                             
authentication_windows_use_principal_nameYes         Yes                                             
auto_increment_increment                        Yes                     Both        Yes
auto_increment_offset                        Yes                     Both        Yes
autocommit     Yes         Yes         Yes                     Both        Yes
automatic_sp_privileges                        Yes                     Global      Yes
back_log                               Yes                     Global      No
basedir        Yes         Yes         Yes                     Global      No
big-tables     Yes         Yes                                 Both        Yes
- _Variable_:                          Yes                     Both        Yes
big_tables                                                                 
bind-address   Yes         Yes         Yes                     Global      No
Binlog_cache_disk_use                                    Yes         Global      No
binlog_cache_sizeYes         Yes         Yes                     Global      Yes
Binlog_cache_use                                    Yes         Global      No
binlog_direct_non_transactional_updatesYes         Yes         Yes                     Both        Yes
binlog-do-db   Yes         Yes                                             
binlog-format  Yes         Yes                                 Both        Yes
- _Variable_:                          Yes                     Both        Yes
binlog_format                                                              
binlog-ignore-dbYes         Yes                                             
binlog-row-event-max-sizeYes         Yes                                             
Binlog_stmt_cache_disk_use                                    Yes         Global      No
binlog_stmt_cache_sizeYes         Yes         Yes                     Global      Yes
Binlog_stmt_cache_use                                    Yes         Global      No
bootstrap      Yes         Yes                                             
bulk_insert_buffer_sizeYes         Yes         Yes                     Both        Yes
Bytes_received                                     Yes         Both        No
Bytes_sent                                         Yes         Both        No
character_set_client                        Yes                     Both        Yes
character-set-client-handshakeYes         Yes                                             
character_set_connection                        Yes                     Both        Yes
character_set_database                        Yes                     Both        Yes
This option                                                                
is dynamic,                                                                
but only the                                                               
server should                                                              
set this                                                                   
information.                                                               
You should                                                                 
not set the                                                                
value of this                                                              
variable                                                                   
manually.                                                                  
character-set-filesystemYes         Yes                                 Both        Yes
- _Variable_:                          Yes                     Both        Yes
character_set_filesystem                                                            
character_set_results                        Yes                     Both        Yes
character-set-serverYes         Yes                                 Both        Yes
- _Variable_:                          Yes                     Both        Yes
character_set_server                                                            
character_set_system                        Yes                     Global      No
character-sets-dirYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
character_sets_dir                                                            
chroot         Yes         Yes                                             
collation_connection                        Yes                     Both        Yes
collation_database                        Yes                     Both        Yes
This option                                                                
is dynamic,                                                                
but only the                                                               
server should                                                              
set this                                                                   
information.                                                               
You should                                                                 
not set the                                                                
value of this                                                              
variable                                                                   
manually.                                                                  
collation-serverYes         Yes                                 Both        Yes
- _Variable_:                          Yes                     Both        Yes
collation_server                                                            
Com_admin_commands                                    Yes         Both        No
Com_alter_db                                       Yes         Both        No
Com_alter_db_upgrade                                    Yes         Both        No
Com_alter_event                                    Yes         Both        No
Com_alter_function                                    Yes         Both        No
Com_alter_procedure                                    Yes         Both        No
Com_alter_server                                    Yes         Both        No
Com_alter_table                                    Yes         Both        No
Com_alter_tablespace                                    Yes         Both        No
Com_analyze                                        Yes         Both        No
Com_assign_to_keycache                                    Yes         Both        No
Com_begin                                          Yes         Both        No
Com_binlog                                         Yes         Both        No
Com_call_procedure                                    Yes         Both        No
Com_change_db                                      Yes         Both        No
Com_change_master                                    Yes         Both        No
Com_check                                          Yes         Both        No
Com_checksum                                       Yes         Both        No
Com_commit                                         Yes         Both        No
Com_create_db                                      Yes         Both        No
Com_create_event                                    Yes         Both        No
Com_create_function                                    Yes         Both        No
Com_create_index                                    Yes         Both        No
Com_create_procedure                                    Yes         Both        No
Com_create_server                                    Yes         Both        No
Com_create_table                                    Yes         Both        No
Com_create_trigger                                    Yes         Both        No
Com_create_udf                                     Yes         Both        No
Com_create_user                                    Yes         Both        No
Com_create_view                                    Yes         Both        No
Com_dealloc_sql                                    Yes         Both        No
Com_delete                                         Yes         Both        No
Com_delete_multi                                    Yes         Both        No
Com_do                                             Yes         Both        No
Com_drop_db                                        Yes         Both        No
Com_drop_event                                     Yes         Both        No
Com_drop_function                                    Yes         Both        No
Com_drop_index                                     Yes         Both        No
Com_drop_procedure                                    Yes         Both        No
Com_drop_server                                    Yes         Both        No
Com_drop_table                                     Yes         Both        No
Com_drop_trigger                                    Yes         Both        No
Com_drop_user                                      Yes         Both        No
Com_drop_view                                      Yes         Both        No
Com_empty_query                                    Yes         Both        No
Com_execute_sql                                    Yes         Both        No
Com_flush                                          Yes         Both        No
Com_grant                                          Yes         Both        No
Com_ha_close                                       Yes         Both        No
Com_ha_open                                        Yes         Both        No
Com_ha_read                                        Yes         Both        No
Com_help                                           Yes         Both        No
Com_insert                                         Yes         Both        No
Com_insert_select                                    Yes         Both        No
Com_install_plugin                                    Yes         Both        No
Com_kill                                           Yes         Both        No
Com_load                                           Yes         Both        No
Com_lock_tables                                    Yes         Both        No
Com_optimize                                       Yes         Both        No
Com_preload_keys                                    Yes         Both        No
Com_prepare_sql                                    Yes         Both        No
Com_purge                                          Yes         Both        No
Com_purge_before_date                                    Yes         Both        No
Com_release_savepoint                                    Yes         Both        No
Com_rename_table                                    Yes         Both        No
Com_rename_user                                    Yes         Both        No
Com_repair                                         Yes         Both        No
Com_replace                                        Yes         Both        No
Com_replace_select                                    Yes         Both        No
Com_reset                                          Yes         Both        No
Com_resignal                                       Yes         Both        No
Com_revoke                                         Yes         Both        No
Com_revoke_all                                     Yes         Both        No
Com_rollback                                       Yes         Both        No
Com_rollback_to_savepoint                                    Yes         Both        No
Com_savepoint                                      Yes         Both        No
Com_select                                         Yes         Both        No
Com_set_option                                     Yes         Both        No
Com_show_authors                                    Yes         Both        No
Com_show_binlog_events                                    Yes         Both        No
Com_show_binlogs                                    Yes         Both        No
Com_show_charsets                                    Yes         Both        No
Com_show_collations                                    Yes         Both        No
Com_show_contributors                                    Yes         Both        No
Com_show_create_db                                    Yes         Both        No
Com_show_create_event                                    Yes         Both        No
Com_show_create_func                                    Yes         Both        No
Com_show_create_proc                                    Yes         Both        No
Com_show_create_table                                    Yes         Both        No
Com_show_create_trigger                                    Yes         Both        No
Com_show_databases                                    Yes         Both        No
Com_show_engine_logs                                    Yes         Both        No
Com_show_engine_mutex                                    Yes         Both        No
Com_show_engine_status                                    Yes         Both        No
Com_show_errors                                    Yes         Both        No
Com_show_events                                    Yes         Both        No
Com_show_fields                                    Yes         Both        No
Com_show_function_code                                    Yes         Both        No
Com_show_function_status                                    Yes         Both        No
Com_show_grants                                    Yes         Both        No
Com_show_keys                                      Yes         Both        No
Com_show_master_status                                    Yes         Both        No
Com_show_ndb_status                                    Yes         Both        No
Com_show_new_master                                    Yes         Both        No
Com_show_open_tables                                    Yes         Both        No
Com_show_plugins                                    Yes         Both        No
Com_show_privileges                                    Yes         Both        No
Com_show_procedure_code                                    Yes         Both        No
Com_show_procedure_status                                    Yes         Both        No
Com_show_processlist                                    Yes         Both        No
Com_show_profile                                    Yes         Both        No
Com_show_profiles                                    Yes         Both        No
Com_show_relaylog_events                                    Yes         Both        No
Com_show_slave_hosts                                    Yes         Both        No
Com_show_slave_status                                    Yes         Both        No
Com_show_status                                    Yes         Both        No
Com_show_storage_engines                                    Yes         Both        No
Com_show_table_status                                    Yes         Both        No
Com_show_tables                                    Yes         Both        No
Com_show_triggers                                    Yes         Both        No
Com_show_variables                                    Yes         Both        No
Com_show_warnings                                    Yes         Both        No
Com_signal                                         Yes         Both        No
Com_slave_start                                    Yes         Both        No
Com_slave_stop                                     Yes         Both        No
Com_stmt_close                                     Yes         Both        No
Com_stmt_execute                                    Yes         Both        No
Com_stmt_fetch                                     Yes         Both        No
Com_stmt_prepare                                    Yes         Both        No
Com_stmt_reprepare                                    Yes         Both        No
Com_stmt_reset                                     Yes         Both        No
Com_stmt_send_long_data                                    Yes         Both        No
Com_truncate                                       Yes         Both        No
Com_uninstall_plugin                                    Yes         Both        No
Com_unlock_tables                                    Yes         Both        No
Com_update                                         Yes         Both        No
Com_update_multi                                    Yes         Both        No
Com_xa_commit                                      Yes         Both        No
Com_xa_end                                         Yes         Both        No
Com_xa_prepare                                     Yes         Both        No
Com_xa_recover                                     Yes         Both        No
Com_xa_rollback                                    Yes         Both        No
Com_xa_start                                       Yes         Both        No
completion_typeYes         Yes         Yes                     Both        Yes
Compression                                        Yes         Session     No
concurrent_insertYes         Yes         Yes                     Global      Yes
connect_timeoutYes         Yes         Yes                     Global      Yes
Connections                                        Yes         Global      No
console        Yes         Yes                                             
core-file      Yes         Yes                                             
Created_tmp_disk_tables                                    Yes         Both        No
Created_tmp_files                                    Yes         Global      No
Created_tmp_tables                                    Yes         Both        No
datadir        Yes         Yes         Yes                     Global      No
date_format                            Yes                     Global      No
datetime_format                        Yes                     Global      No
debug          Yes         Yes         Yes                     Both        Yes
debug_sync                             Yes                     Session     Yes
debug-sync-timeoutYes         Yes                                             
default-storage-engineYes         Yes                                 Both        Yes
- _Variable_:                          Yes                     Both        Yes
default_storage_engine                                                            
default-time-zoneYes         Yes                                             
default_week_formatYes         Yes         Yes                     Both        Yes
defaults-extra-fileYes                                                         
defaults-file  Yes                                                         
defaults-group-suffixYes                                                         
delay-key-writeYes         Yes                                 Global      Yes
- _Variable_:                          Yes                     Global      Yes
delay_key_write                                                            
Delayed_errors                                     Yes         Global      No
delayed_insert_limitYes         Yes         Yes                     Global      Yes
Delayed_insert_threads                                    Yes         Global      No
delayed_insert_timeoutYes         Yes         Yes                     Global      Yes
delayed_queue_sizeYes         Yes         Yes                     Global      Yes
Delayed_writes                                     Yes         Global      No
des-key-file   Yes         Yes                                             
disconnect-slave-event-countYes         Yes                                             
div_precision_incrementYes         Yes         Yes                     Both        Yes
enable-locking Yes         Yes                                             
enable-named-pipeYes         Yes                                             
- _Variable_:                                                              
named_pipe                                                                 
enable-pstack  Yes         Yes                                             
engine-condition-pushdownYes         Yes                                 Both        Yes
- _Variable_:                          Yes                     Both        Yes
engine_condition_pushdown                                                            
error_count                            Yes                     Session     No
event-schedulerYes         Yes                                 Global      Yes
- _Variable_:                          Yes                     Global      Yes
event_scheduler                                                            
exit-info      Yes         Yes                                             
expire_logs_daysYes         Yes         Yes                     Global      Yes
external-lockingYes         Yes                                             
- _Variable_:                                                              
skip_external_locking                                                            
external_user                          Yes                     Session     No
*Note          Yes         Yes                                             
federated:                                                                 
federated-storage-engine.                                                            
flush          Yes         Yes         Yes                     Global      Yes
Flush_commands                                     Yes         Global      No
flush_time     Yes         Yes         Yes                     Global      Yes
foreign_key_checks                        Yes                     Both        Yes
ft_boolean_syntaxYes         Yes         Yes                     Global      Yes
ft_max_word_lenYes         Yes         Yes                     Global      No
ft_min_word_lenYes         Yes         Yes                     Global      No
ft_query_expansion_limitYes         Yes         Yes                     Global      No
ft_stopword_fileYes         Yes         Yes                     Global      No
gdb            Yes         Yes                                             
general-log    Yes         Yes                                 Global      Yes
- _Variable_:                          Yes                     Global      Yes
general_log                                                                
general_log_fileYes         Yes         Yes                     Global      Yes
group_concat_max_lenYes         Yes         Yes                     Both        Yes
Handler_commit                                     Yes         Both        No
Handler_delete                                     Yes         Both        No
Handler_discover                                    Yes         Both        No
Handler_prepare                                    Yes         Both        No
Handler_read_first                                    Yes         Both        No
Handler_read_key                                    Yes         Both        No
Handler_read_last                                    Yes         Both        No
Handler_read_next                                    Yes         Both        No
Handler_read_prev                                    Yes         Both        No
Handler_read_rnd                                    Yes         Both        No
Handler_read_rnd_next                                    Yes         Both        No
Handler_rollback                                    Yes         Both        No
Handler_savepoint                                    Yes         Both        No
Handler_savepoint_rollback                                    Yes         Both        No
Handler_update                                     Yes         Both        No
Handler_write                                      Yes         Both        No
have_compress                          Yes                     Global      No
have_crypt                             Yes                     Global      No
have_csv                               Yes                     Global      No
have_dynamic_loading                        Yes                     Global      No
have_geometry                          Yes                     Global      No
have_innodb                            Yes                     Global      No
have_ndbcluster                        Yes                     Global      No
have_openssl                           Yes                     Global      No
have_partitioning                        Yes                     Global      No
have_profiling                         Yes                     Global      No
have_query_cache                        Yes                     Global      No
have_rtree_keys                        Yes                     Global      No
have_ssl                               Yes                     Global      No
have_symlink                           Yes                     Global      No
help           Yes         Yes                                             
hostname                               Yes                     Global      No
identity                               Yes                     Session     Yes
ignore-builtin-innodbYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
ignore_builtin_innodb                                                            
init_connect   Yes         Yes         Yes                     Global      Yes
init-file      Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
init_file                                                                  
init-rpl-role  Yes         Yes                                             
init_slave     Yes         Yes         Yes                     Global      Yes
innodb         Yes         Yes                                             
innodb_adaptive_flushingYes         Yes         Yes                     Global      Yes
innodb_adaptive_hash_indexYes         Yes         Yes                     Global      Yes
innodb_additional_mem_pool_sizeYes         Yes         Yes                     Global      No
innodb_autoextend_incrementYes         Yes         Yes                     Global      Yes
innodb_autoinc_lock_modeYes         Yes         Yes                     Global      No
Innodb_buffer_pool_bytes_data                                    Yes         Global      No
Innodb_buffer_pool_bytes_dirty                                    Yes         Global      No
innodb_buffer_pool_instancesYes         Yes         Yes                     Global      No
Innodb_buffer_pool_pages_data                                    Yes         Global      No
Innodb_buffer_pool_pages_dirty                                    Yes         Global      No
Innodb_buffer_pool_pages_flushed                                    Yes         Global      No
Innodb_buffer_pool_pages_free                                    Yes         Global      No
Innodb_buffer_pool_pages_latched                                    Yes         Global      No
Innodb_buffer_pool_pages_misc                                    Yes         Global      No
Innodb_buffer_pool_pages_total                                    Yes         Global      No
Innodb_buffer_pool_read_ahead                                    Yes         Global      No
Innodb_buffer_pool_read_ahead_evicted                                    Yes         Global      No
Innodb_buffer_pool_read_requests                                    Yes         Global      No
Innodb_buffer_pool_reads                                    Yes         Global      No
innodb_buffer_pool_sizeYes         Yes         Yes                     Global      No
Innodb_buffer_pool_wait_free                                    Yes         Global      No
Innodb_buffer_pool_write_requests                                    Yes         Global      No
innodb_change_bufferingYes         Yes         Yes                     Global      Yes
innodb_checksumsYes         Yes         Yes                     Global      No
innodb_commit_concurrencyYes         Yes         Yes                     Global      Yes
innodb_concurrency_ticketsYes         Yes         Yes                     Global      Yes
innodb_data_file_pathYes         Yes         Yes                     Global      No
Innodb_data_fsyncs                                    Yes         Global      No
innodb_data_home_dirYes         Yes         Yes                     Global      No
Innodb_data_pending_fsyncs                                    Yes         Global      No
Innodb_data_pending_reads                                    Yes         Global      No
Innodb_data_pending_writes                                    Yes         Global      No
Innodb_data_read                                    Yes         Global      No
Innodb_data_reads                                    Yes         Global      No
Innodb_data_writes                                    Yes         Global      No
Innodb_data_written                                    Yes         Global      No
Innodb_dblwr_pages_written                                    Yes         Global      No
Innodb_dblwr_writes                                    Yes         Global      No
innodb_doublewriteYes         Yes         Yes                     Global      No
innodb_fast_shutdownYes         Yes         Yes                     Global      Yes
innodb_file_formatYes         Yes         Yes                     Global      Yes
innodb_file_format_checkYes         Yes         Yes                     Global      No
innodb_file_format_maxYes         Yes         Yes                     Global      Yes
innodb_file_per_tableYes         Yes         Yes                     Global      Yes
innodb_flush_log_at_trx_commitYes         Yes         Yes                     Global      Yes
innodb_flush_methodYes         Yes         Yes                     Global      No
innodb_force_load_corruptedYes         Yes         Yes                     Global      No
innodb_force_recoveryYes         Yes         Yes                     Global      No
Innodb_have_atomic_builtins                                    Yes         Global      No
innodb_io_capacityYes         Yes         Yes                     Global      Yes
innodb_large_prefixYes         Yes         Yes                     Global      Yes
innodb_lock_wait_timeoutYes         Yes         Yes                     Both        Yes
innodb_locks_unsafe_for_binlogYes         Yes         Yes                     Global      No
innodb_log_buffer_sizeYes         Yes         Yes                     Global      No
innodb_log_file_sizeYes         Yes         Yes                     Global      No
innodb_log_files_in_groupYes         Yes         Yes                     Global      No
innodb_log_group_home_dirYes         Yes         Yes                     Global      No
Innodb_log_waits                                    Yes         Global      No
Innodb_log_write_requests                                    Yes         Global      No
Innodb_log_writes                                    Yes         Global      No
innodb_max_dirty_pages_pctYes         Yes         Yes                     Global      Yes
innodb_max_purge_lagYes         Yes         Yes                     Global      Yes
innodb_mirrored_log_groupsYes         Yes         Yes                     Global      No
innodb_old_blocks_pctYes         Yes         Yes                     Global      Yes
innodb_old_blocks_timeYes         Yes         Yes                     Global      Yes
innodb_open_filesYes         Yes         Yes                     Global      No
Innodb_os_log_fsyncs                                    Yes         Global      No
Innodb_os_log_pending_fsyncs                                    Yes         Global      No
Innodb_os_log_pending_writes                                    Yes         Global      No
Innodb_os_log_written                                    Yes         Global      No
Innodb_page_size                                    Yes         Global      No
Innodb_pages_created                                    Yes         Global      No
Innodb_pages_read                                    Yes         Global      No
Innodb_pages_written                                    Yes         Global      No
innodb_print_all_deadlocksYes         Yes         Yes                     Global      Yes
innodb_purge_batch_sizeYes         Yes         Yes                     Global      Yes
innodb_purge_threadsYes         Yes         Yes                     Global      No
innodb_random_read_aheadYes         Yes         Yes                     Global      Yes
innodb_read_ahead_thresholdYes         Yes         Yes                     Global      Yes
innodb_read_io_threadsYes         Yes         Yes                     Global      No
innodb_replication_delayYes         Yes         Yes                     Global      Yes
innodb_rollback_on_timeoutYes         Yes         Yes                     Global      No
innodb_rollback_segmentsYes         Yes         Yes                     Global      Yes
Innodb_row_lock_current_waits                                    Yes         Global      No
Innodb_row_lock_time                                    Yes         Global      No
Innodb_row_lock_time_avg                                    Yes         Global      No
Innodb_row_lock_time_max                                    Yes         Global      No
Innodb_row_lock_waits                                    Yes         Global      No
Innodb_rows_deleted                                    Yes         Global      No
Innodb_rows_inserted                                    Yes         Global      No
Innodb_rows_read                                    Yes         Global      No
Innodb_rows_updated                                    Yes         Global      No
innodb_spin_wait_delayYes         Yes         Yes                     Global      Yes
innodb_stats_methodYes         Yes         Yes                     Global      Yes
innodb_stats_on_metadataYes         Yes         Yes                     Global      Yes
innodb_stats_sample_pagesYes         Yes         Yes                     Global      Yes
innodb-status-fileYes         Yes                                             
innodb_strict_modeYes         Yes         Yes                     Both        Yes
innodb_support_xaYes         Yes         Yes                     Both        Yes
innodb_sync_spin_loopsYes         Yes         Yes                     Global      Yes
innodb_table_locksYes         Yes         Yes                     Both        Yes
innodb_thread_concurrencyYes         Yes         Yes                     Global      Yes
innodb_thread_sleep_delayYes         Yes         Yes                     Global      Yes
Innodb_truncated_status_writes                                    Yes         Global      No
innodb_use_native_aioYes         Yes         Yes                     Global      No
innodb_use_sys_mallocYes         Yes         Yes                     Global      No
innodb_version                         Yes                     Global      No
innodb_write_io_threadsYes         Yes         Yes                     Global      No
insert_id                              Yes                     Session     Yes
install        Yes                                                         
install-manual Yes                                                         
interactive_timeoutYes         Yes         Yes                     Both        Yes
join_buffer_sizeYes         Yes         Yes                     Both        Yes
keep_files_on_createYes         Yes         Yes                     Both        Yes
Key_blocks_not_flushed                                    Yes         Global      No
Key_blocks_unused                                    Yes         Global      No
Key_blocks_used                                    Yes         Global      No
key_buffer_sizeYes         Yes         Yes                     Global      Yes
key_cache_age_thresholdYes         Yes         Yes                     Global      Yes
key_cache_block_sizeYes         Yes         Yes                     Global      Yes
key_cache_division_limitYes         Yes         Yes                     Global      Yes
Key_read_requests                                    Yes         Global      No
Key_reads                                          Yes         Global      No
Key_write_requests                                    Yes         Global      No
Key_writes                                         Yes         Global      No
language       Yes         Yes         Yes                     Global      No
large_files_support                        Yes                     Global      No
large_page_size                        Yes                     Global      No
large-pages    Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
large_pages                                                                
last_insert_id                         Yes                     Session     Yes
Last_query_cost                                    Yes         Session     No
lc-messages    Yes         Yes                                 Both        Yes
- _Variable_:                          Yes                     Both        Yes
lc_messages                                                                
lc-messages-dirYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
lc_messages_dir                                                            
lc_time_names                          Yes                     Both        Yes
license                                Yes                     Global      No
local_infile                           Yes                     Global      Yes
lock_wait_timeoutYes         Yes         Yes                     Both        Yes
locked_in_memory                        Yes                     Global      No
log            Yes         Yes         Yes                     Global      Yes
log_bin                                Yes                     Global      No
log-bin        Yes         Yes         Yes                     Global      No
log-bin-index  Yes         Yes                                             
log-bin-trust-function-creatorsYes         Yes                                 Global      Yes
- _Variable_:                          Yes                     Global      Yes
log_bin_trust_function_creators                                                            
log-bin-trust-routine-creatorsYes         Yes                                 Global      Yes
- _Variable_:                          Yes                     Global      Yes
log_bin_trust_routine_creators                                                            
(http://dev.mysql.com/doc/refman/5.0/en/server-system-variables.html#sysvar_log_bin_trust_routine_creators)                                                            
log_bin_use_v1_row_eventsYes         Yes         Yes                     Global      No
log-bin-use-v1-row-eventsYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
log_bin_use_v1_row_events                                                            
log-error      Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
log_error                                                                  
log-isam       Yes         Yes                                             
log-output     Yes         Yes                                 Global      Yes
- _Variable_:                          Yes                     Global      Yes
log_output                                                                 
log-queries-not-using-indexesYes         Yes                                 Global      Yes
- _Variable_:                          Yes                     Global      Yes
log_queries_not_using_indexes                                                            
log-short-formatYes         Yes                                             
log-slave-updatesYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
log_slave_updates                                                            
log_slave_updatesYes         Yes         Yes                     Global      No
log-slow-admin-statementsYes         Yes                                             
log-slow-queriesYes         Yes                                 Global      Yes
- _Variable_:                          Yes                     Global      Yes
log_slow_queries                                                            
log-slow-slave-statementsYes         Yes                                             
log-tc         Yes         Yes                                             
log-tc-size    Yes         Yes                                             
log-warnings   Yes         Yes                                 Both        Yes
- _Variable_:                          Yes                     Both        Yes
log_warnings                                                               
long_query_timeYes         Yes         Yes                     Both        Yes
low-priority-updatesYes         Yes                                 Both        Yes
- _Variable_:                          Yes                     Both        Yes
low_priority_updates                                                            
lower_case_file_system                        Yes                     Global      No
lower_case_table_namesYes         Yes         Yes                     Global      No
master-connect-retryYes         Yes                                             
master-host    Yes         Yes                                             
master-info-fileYes         Yes                                             
master-passwordYes         Yes                                             
master-port    Yes         Yes                                             
master-retry-countYes         Yes                                             
master-ssl     Yes         Yes                                             
master-ssl-ca  Yes         Yes                                             
master-ssl-capathYes         Yes                                             
master-ssl-certYes         Yes                                             
master-ssl-cipherYes         Yes                                             
master-ssl-key Yes         Yes                                             
master-user    Yes         Yes                                             
max_allowed_packetYes         Yes         Yes                     Global      Yes
max_binlog_cache_sizeYes         Yes         Yes                     Global      Yes
max-binlog-dump-eventsYes         Yes                                             
max_binlog_sizeYes         Yes         Yes                     Global      Yes
max_binlog_stmt_cache_sizeYes         Yes         Yes                     Global      Yes
max_connect_errorsYes         Yes         Yes                     Global      Yes
max_connectionsYes         Yes         Yes                     Global      Yes
max_delayed_threadsYes         Yes         Yes                     Both        Yes
max_error_countYes         Yes         Yes                     Both        Yes
max_heap_table_sizeYes         Yes         Yes                     Both        Yes
max_insert_delayed_threads                        Yes                     Both        Yes
max_join_size  Yes         Yes         Yes                     Both        Yes
max_length_for_sort_dataYes         Yes         Yes                     Both        Yes
max_long_data_sizeYes         Yes         Yes                     Global      No
max_prepared_stmt_countYes         Yes         Yes                     Global      Yes
max_relay_log_sizeYes         Yes         Yes                     Global      Yes
max_seeks_for_keyYes         Yes         Yes                     Both        Yes
max_sort_lengthYes         Yes         Yes                     Both        Yes
max_sp_recursion_depthYes         Yes         Yes                     Both        Yes
Max_used_connections                                    Yes         Global      No
max_user_connectionsYes         Yes         Yes                     Both        Yes
max_write_lock_countYes         Yes         Yes                     Global      Yes
memlock        Yes         Yes         Yes                     Global      No
metadata_locks_cache_size                        Yes                     Global      No
min-examined-row-limitYes         Yes         Yes                     Both        Yes
myisam-block-sizeYes         Yes                                             
myisam_data_pointer_sizeYes         Yes         Yes                     Global      Yes
myisam_max_sort_file_sizeYes         Yes         Yes                     Global      Yes
myisam_mmap_sizeYes         Yes         Yes                     Global      No
myisam-recover Yes         Yes                                             
- _Variable_:                                                              
myisam_recover_options                                                            
myisam-recover-optionsYes         Yes                                             
- _Variable_:                                                              
myisam_recover_options                                                            
myisam_recover_options                        Yes                     Global      No
myisam_repair_threadsYes         Yes         Yes                     Both        Yes
myisam_sort_buffer_sizeYes         Yes         Yes                     Both        Yes
myisam_stats_methodYes         Yes         Yes                     Both        Yes
myisam_use_mmapYes         Yes         Yes                     Global      Yes
named_pipe                             Yes                     Global      No
Ndb_api_bytes_received_count                                    Yes         Global      No
Ndb_api_bytes_received_count_session                                    Yes         Session     No
Ndb_api_bytes_received_count_slave                                    Yes         Global      No
Ndb_api_bytes_sent_count                                    Yes         Global      No
Ndb_api_bytes_sent_count_session                                    Yes         Session     No
Ndb_api_bytes_sent_count_slave                                    Yes         Global      No
Ndb_api_event_bytes_count                                    Yes         Global      No
Ndb_api_event_bytes_count_injector                                    Yes         Global      No
Ndb_api_event_data_count                                    Yes         Global      No
Ndb_api_event_data_count_injector                                    Yes         Global      No
Ndb_api_event_nondata_count                                    Yes         Global      No
Ndb_api_event_nondata_count_injector                                    Yes         Global      No
Ndb_api_pk_op_count                                    Yes         Global      No
Ndb_api_pk_op_count_session                                    Yes         Session     No
Ndb_api_pk_op_count_slave                                    Yes         Global      No
Ndb_api_pruned_scan_count                                    Yes         Global      No
Ndb_api_pruned_scan_count_session                                    Yes         Session     No
Ndb_api_pruned_scan_count_slave                                    Yes         Global      No
Ndb_api_range_scan_count                                    Yes         Global      No
Ndb_api_range_scan_count_session                                    Yes         Session     No
Ndb_api_range_scan_count_slave                                    Yes         Global      No
Ndb_api_read_row_count                                    Yes         Global      No
Ndb_api_read_row_count_session                                    Yes         Session     No
Ndb_api_read_row_count_slave                                    Yes         Global      No
Ndb_api_scan_batch_count                                    Yes         Global      No
Ndb_api_scan_batch_count_session                                    Yes         Session     No
Ndb_api_scan_batch_count_slave                                    Yes         Global      No
Ndb_api_table_scan_count                                    Yes         Global      No
Ndb_api_table_scan_count_session                                    Yes         Session     No
Ndb_api_table_scan_count_slave                                    Yes         Global      No
Ndb_api_trans_abort_count                                    Yes         Global      No
Ndb_api_trans_abort_count_session                                    Yes         Session     No
Ndb_api_trans_abort_count_slave                                    Yes         Global      No
Ndb_api_trans_close_count                                    Yes         Global      No
Ndb_api_trans_close_count_session                                    Yes         Session     No
Ndb_api_trans_close_count_slave                                    Yes         Global      No
Ndb_api_trans_commit_count                                    Yes         Global      No
Ndb_api_trans_commit_count_session                                    Yes         Session     No
Ndb_api_trans_commit_count_slave                                    Yes         Global      No
Ndb_api_trans_local_read_row_count                                    Yes         Global      No
Ndb_api_trans_local_read_row_count_session                                    Yes         Session     No
Ndb_api_trans_local_read_row_count_slave                                    Yes         Global      No
Ndb_api_trans_start_count                                    Yes         Global      No
Ndb_api_trans_start_count_session                                    Yes         Session     No
Ndb_api_trans_start_count_slave                                    Yes         Global      No
Ndb_api_uk_op_count                                    Yes         Global      No
Ndb_api_uk_op_count_session                                    Yes         Session     No
Ndb_api_uk_op_count_slave                                    Yes         Global      No
Ndb_api_wait_exec_complete_count                                    Yes         Global      No
Ndb_api_wait_exec_complete_count_session                                    Yes         Session     No
Ndb_api_wait_exec_complete_count_slave                                    Yes         Global      No
Ndb_api_wait_meta_request_count                                    Yes         Global      No
Ndb_api_wait_meta_request_count_session                                    Yes         Session     No
Ndb_api_wait_meta_request_count_slave                                    Yes         Global      No
Ndb_api_wait_nanos_count                                    Yes         Global      No
Ndb_api_wait_nanos_count_session                                    Yes         Session     No
Ndb_api_wait_nanos_count_slave                                    Yes         Global      No
Ndb_api_wait_scan_result_count                                    Yes         Global      No
Ndb_api_wait_scan_result_count_session                                    Yes         Session     No
Ndb_api_wait_scan_result_count_slave                                    Yes         Global      No
ndb_autoincrement_prefetch_szYes         Yes         Yes                     Both        Yes
ndb-batch-size Yes         Yes         Yes                     Global      No
ndb-blob-read-batch-bytesYes         Yes         Yes                     Both        Yes
ndb-blob-write-batch-bytesYes         Yes         Yes                     Both        Yes
ndb_cache_check_timeYes         Yes         Yes                     Global      Yes
ndb-cluster-connection-poolYes         Yes         Yes         Yes         Global      No
Ndb_cluster_node_id                                    Yes         Both        No
Ndb_config_from_host                                    Yes         Both        No
Ndb_config_from_port                                    Yes         Both        No
Ndb_conflict_fn_epoch                                    Yes         Global      No
Ndb_conflict_fn_epoch_trans                                    Yes         Global      No
Ndb_conflict_fn_max                                    Yes         Global      No
Ndb_conflict_fn_old                                    Yes         Global      No
Ndb_conflict_trans_conflict_commit_count                                    Yes         Global      No
Ndb_conflict_trans_detect_iter_count                                    Yes         Global      No
Ndb_conflict_trans_reject_count                                    Yes         Global      No
Ndb_conflict_trans_row_conflict_count                                    Yes         Global      No
Ndb_conflict_trans_row_reject_count                                    Yes         Global      No
ndb-connectstringYes         Yes                                             
ndb-deferred-constraintsYes         Yes                                 Both        Yes
- _Variable_:                          Yes                     Both        Yes
ndb_deferred_constraints                                                            
ndb_deferred_constraintsYes         Yes         Yes                     Both        Yes
ndb_distributionYes         Yes         Yes                     Both        Yes
ndb-distributionYes         Yes                                 Both        Yes
- _Variable_:                          Yes                     Both        Yes
ndb_distribution                                                            
ndb_execute_count                                    Yes         Global      No
ndb_extra_loggingYes         Yes         Yes                     Global      Yes
ndb_force_send Yes         Yes         Yes                     Both        Yes
ndb_join_pushdown                        Yes                     Global      No
ndb-log-apply-statusYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
ndb_log_apply_status                                                            
ndb_log_bin    Yes                     Yes                     Both        Yes
ndb_log_binlog_indexYes                     Yes                     Global      Yes
ndb_log_empty_epochsYes         Yes         Yes                     Global      Yes
ndb-log-empty-epochsYes         Yes         Yes                     Global      Yes
ndb-log-orig   Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
ndb_log_orig                                                               
ndb-log-transaction-idYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
ndb_log_transaction_id                                                            
ndb_log_transaction_id                        Yes                     Global      No
ndb-log-update-as-writeYes         Yes         Yes                     Global      Yes
ndb_log_updated_onlyYes         Yes         Yes                     Global      Yes
ndb-mgmd-host  Yes         Yes                                             
ndb-nodeid     Yes         Yes                     Yes         Global      No
Ndb_number_of_data_nodes                                    Yes         Global      No
ndb_optimization_delay                        Yes                     Global      Yes
ndb_optimized_node_selectionYes         Yes                                             
ndb_pruned_scan_count                                    Yes         Global      No
Ndb_pushed_queries_defined                                    Yes         Global      No
Ndb_pushed_queries_dropped                                    Yes         Global      No
Ndb_pushed_queries_executed                                    Yes         Global      No
ndb_pushed_reads                                    Yes         Global      No
ndb_report_thresh_binlog_epoch_slipYes         Yes                                             
ndb_report_thresh_binlog_mem_usageYes         Yes                                             
ndb_scan_count                                     Yes         Global      No
ndb_table_no_logging                        Yes                     Session     Yes
ndb_table_temporary                        Yes                     Session     Yes
ndb-transid-mysql-connection-mapYes                                                         
ndb_use_copying_alter_table                        Yes                     Both        No
ndb_use_exact_count                        Yes                     Both        Yes
ndb_use_transactionsYes         Yes         Yes                     Both        Yes
ndb-wait-connectedYes         Yes         Yes                     Global      No
ndb-wait-setup Yes         Yes         Yes                     Global      No
ndbcluster     Yes         Yes                                             
- _Variable_:                                                              
have_ndbcluster                                                            
ndbinfo_database                        Yes                     Global      No
ndbinfo_max_bytesYes                     Yes                     Both        Yes
ndbinfo_max_rowsYes                     Yes                     Both        Yes
ndbinfo_show_hiddenYes                     Yes                     Both        Yes
ndbinfo_table_prefixYes                     Yes                     Both        Yes
ndbinfo_version                        Yes                     Global      No
net_buffer_lengthYes         Yes         Yes                     Both        Yes
net_read_timeoutYes         Yes         Yes                     Both        Yes
net_retry_countYes         Yes         Yes                     Both        Yes
net_write_timeoutYes         Yes         Yes                     Both        Yes
new            Yes         Yes         Yes                     Both        Yes
no-defaults    Yes                                                         
Not_flushed_delayed_rows                                    Yes         Global      No
old            Yes         Yes         Yes                     Global      No
old-alter-tableYes         Yes                                 Both        Yes
- _Variable_:                          Yes                     Both        Yes
old_alter_table                                                            
old_passwords                          Yes                     Both        Yes
old-style-user-limitsYes         Yes                                             
one-thread     Yes         Yes                                             
Open_files                                         Yes         Global      No
open-files-limitYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
open_files_limit                                                            
Open_streams                                       Yes         Global      No
Open_table_definitions                                    Yes         Global      No
Open_tables                                        Yes         Both        No
Opened_files                                       Yes         Global      No
Opened_table_definitions                                    Yes         Both        No
Opened_tables                                      Yes         Both        No
optimizer_prune_levelYes         Yes         Yes                     Both        Yes
optimizer_search_depthYes         Yes         Yes                     Both        Yes
optimizer_switchYes         Yes         Yes                     Both        Yes
partition      Yes         Yes                                             
- _Variable_:                                                              
have_partitioning                                                            
performance_schemaYes         Yes         Yes                     Global      No
Performance_schema_cond_classes_lost                                    Yes         Global      No
Performance_schema_cond_instances_lost                                    Yes         Global      No
performance_schema_events_waits_history_long_sizeYes         Yes         Yes                     Global      No
performance_schema_events_waits_history_sizeYes         Yes         Yes                     Global      No
Performance_schema_file_classes_lost                                    Yes         Global      No
Performance_schema_file_handles_lost                                    Yes         Global      No
Performance_schema_file_instances_lost                                    Yes         Global      No
Performance_schema_locker_lost                                    Yes         Global      No
performance_schema_max_cond_classesYes         Yes         Yes                     Global      No
performance_schema_max_cond_instancesYes         Yes         Yes                     Global      No
performance_schema_max_file_classesYes         Yes         Yes                     Global      No
performance_schema_max_file_handlesYes         Yes         Yes                     Global      No
performance_schema_max_file_instancesYes         Yes         Yes                     Global      No
performance_schema_max_mutex_classesYes         Yes         Yes                     Global      No
performance_schema_max_mutex_instancesYes         Yes         Yes                     Global      No
performance_schema_max_rwlock_classesYes         Yes         Yes                     Global      No
performance_schema_max_rwlock_instancesYes         Yes         Yes                     Global      No
performance_schema_max_table_handlesYes         Yes         Yes                     Global      No
performance_schema_max_table_instancesYes         Yes         Yes                     Global      No
performance_schema_max_thread_classesYes         Yes         Yes                     Global      No
performance_schema_max_thread_instancesYes         Yes         Yes                     Global      No
Performance_schema_mutex_classes_lost                                    Yes         Global      No
Performance_schema_mutex_instances_lost                                    Yes         Global      No
Performance_schema_rwlock_classes_lost                                    Yes         Global      No
Performance_schema_rwlock_instances_lost                                    Yes         Global      No
Performance_schema_table_handles_lost                                    Yes         Global      No
Performance_schema_table_instances_lost                                    Yes         Global      No
Performance_schema_thread_classes_lost                                    Yes         Global      No
Performance_schema_thread_instances_lost                                    Yes         Global      No
pid-file       Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
pid_file                                                                   
plugin         Yes         Yes                                             
plugin_dir     Yes         Yes         Yes                     Global      No
plugin-load    Yes         Yes                                             
port           Yes         Yes         Yes                     Global      No
port-open-timeoutYes         Yes                                             
preload_buffer_sizeYes         Yes         Yes                     Both        Yes
Prepared_stmt_count                                    Yes         Global      No
print-defaults Yes                                                         
profiling                              Yes                     Both        Yes
profiling_history_sizeYes         Yes         Yes                     Both        Yes
protocol_version                        Yes                     Global      No
proxy_user                             Yes                     Session     No
pseudo_slave_mode                        Yes                     Session     Yes
pseudo_thread_id                        Yes                     Session     Yes
Qcache_free_blocks                                    Yes         Global      No
Qcache_free_memory                                    Yes         Global      No
Qcache_hits                                        Yes         Global      No
Qcache_inserts                                     Yes         Global      No
Qcache_lowmem_prunes                                    Yes         Global      No
Qcache_not_cached                                    Yes         Global      No
Qcache_queries_in_cache                                    Yes         Global      No
Qcache_total_blocks                                    Yes         Global      No
Queries                                            Yes         Both        No
query_alloc_block_sizeYes         Yes         Yes                     Both        Yes
query_cache_limitYes         Yes         Yes                     Global      Yes
query_cache_min_res_unitYes         Yes         Yes                     Global      Yes
query_cache_sizeYes         Yes         Yes                     Global      Yes
query_cache_typeYes         Yes         Yes                     Both        Yes
query_cache_wlock_invalidateYes         Yes         Yes                     Both        Yes
query_prealloc_sizeYes         Yes         Yes                     Both        Yes
Questions                                          Yes         Both        No
rand_seed1                             Yes                     Session     Yes
rand_seed2                             Yes                     Session     Yes
range_alloc_block_sizeYes         Yes         Yes                     Both        Yes
read_buffer_sizeYes         Yes         Yes                     Both        Yes
read_only      Yes         Yes         Yes                     Global      Yes
read_rnd_buffer_sizeYes         Yes         Yes                     Both        Yes
relay-log      Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
relay_log                                                                  
relay-log-indexYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
relay_log_index                                                            
relay_log_indexYes         Yes         Yes                     Global      No
relay-log-info-fileYes         Yes                                             
- _Variable_:                                                              
relay_log_info_file                                                            
relay_log_info_fileYes         Yes         Yes                     Global      No
relay_log_purgeYes         Yes         Yes                     Global      Yes
relay_log_recoveryYes         Yes         Yes                     Global      No
relay-log-recoveryYes         Yes                                             
- _Variable_:                                                              
relay_log_recovery                                                            
relay_log_space_limitYes         Yes         Yes                     Global      No
remove         Yes                                                         
replicate-do-dbYes         Yes                                             
replicate-do-tableYes         Yes                                             
replicate-ignore-dbYes         Yes                                             
replicate-ignore-tableYes         Yes                                             
replicate-rewrite-dbYes         Yes                                             
replicate-same-server-idYes         Yes                                             
replicate-wild-do-tableYes         Yes                                             
replicate-wild-ignore-tableYes         Yes                                             
report-host    Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
report_host                                                                
report-passwordYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
report_password                                                            
report-port    Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
report_port                                                                
report-user    Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
report_user                                                                
rpl_recovery_rank                        Yes                     Global      Yes
Rpl_semi_sync_master_clients                                    Yes         Global      No
rpl_semi_sync_master_enabled                        Yes                     Global      Yes
Rpl_semi_sync_master_net_avg_wait_time                                    Yes         Global      No
Rpl_semi_sync_master_net_wait_time                                    Yes         Global      No
Rpl_semi_sync_master_net_waits                                    Yes         Global      No
Rpl_semi_sync_master_no_times                                    Yes         Global      No
Rpl_semi_sync_master_no_tx                                    Yes         Global      No
Rpl_semi_sync_master_status                                    Yes         Global      No
Rpl_semi_sync_master_timefunc_failures                                    Yes         Global      No
rpl_semi_sync_master_timeout                        Yes                     Global      Yes
rpl_semi_sync_master_trace_level                        Yes                     Global      Yes
Rpl_semi_sync_master_tx_avg_wait_time                                    Yes         Global      No
Rpl_semi_sync_master_tx_wait_time                                    Yes         Global      No
Rpl_semi_sync_master_tx_waits                                    Yes         Global      No
rpl_semi_sync_master_wait_no_slave                        Yes                     Global      Yes
Rpl_semi_sync_master_wait_pos_backtraverse                                    Yes         Global      No
Rpl_semi_sync_master_wait_sessions                                    Yes         Global      No
Rpl_semi_sync_master_yes_tx                                    Yes         Global      No
rpl_semi_sync_slave_enabled                        Yes                     Global      Yes
Rpl_semi_sync_slave_status                                    Yes         Global      No
rpl_semi_sync_slave_trace_level                        Yes                     Global      Yes
Rpl_status                                         Yes         Global      No
safe-mode      Yes         Yes                                             
safe-show-databaseYes         Yes         Yes                     Global      Yes
safe-user-createYes         Yes                                             
safemalloc-mem-limitYes         Yes                                             
secure-auth    Yes         Yes                                 Global      Yes
- _Variable_:                          Yes                     Global      Yes
secure_auth                                                                
secure-file-privYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
secure_file_priv                                                            
Select_full_join                                    Yes         Both        No
Select_full_range_join                                    Yes         Both        No
Select_range                                       Yes         Both        No
Select_range_check                                    Yes         Both        No
Select_scan                                        Yes         Both        No
server-id      Yes         Yes                                 Global      Yes
- _Variable_:                          Yes                     Global      Yes
server_id                                                                  
server-id-bits Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
server_id_bits                                                             
shared_memory                          Yes                     Global      No
shared_memory_base_name                        Yes                     Global      No
show-slave-auth-infoYes         Yes                                             
skip-character-set-client-handshakeYes         Yes                                             
skip-concurrent-insertYes         Yes                                             
- _Variable_:                                                              
concurrent_insert                                                            
skip-event-schedulerYes         Yes                                             
skip_external_lockingYes         Yes         Yes                     Global      No
skip-grant-tablesYes         Yes                                             
skip-host-cacheYes         Yes                                             
skip-locking   Yes         Yes                                             
skip-name-resolveYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
skip_name_resolve                                                            
skip-ndbclusterYes         Yes                                             
skip-networkingYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
skip_networking                                                            
skip-new       Yes         Yes                                             
skip-partition Yes         Yes                                             
skip-safemallocYes         Yes                                             
skip-show-databaseYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
skip_show_database                                                            
skip-slave-startYes         Yes                                             
skip-ssl       Yes         Yes                                             
skip-stack-traceYes         Yes                                             
skip-symbolic-linksYes                                                         
skip-symlink   Yes         Yes                                             
skip-thread-priorityYes         Yes                                             
slave_allow_batchingYes         Yes         Yes                     Global      Yes
slave_compressed_protocolYes         Yes         Yes                     Global      Yes
slave_exec_modeYes         Yes         Yes                     Global      Yes
Slave_heartbeat_period                                    Yes         Global      No
slave-load-tmpdirYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
slave_load_tmpdir                                                            
slave_max_allowed_packet                        Yes                     Global      Yes
slave-max-allowed-packetYes         Yes                                             
- _Variable_:                                                              
slave_max_allowed_packet                                                            
slave-net-timeoutYes         Yes                                 Global      Yes
- _Variable_:                          Yes                     Global      Yes
slave_net_timeout                                                            
Slave_open_temp_tables                                    Yes         Global      No
Slave_received_heartbeats                                    Yes         Global      No
Slave_retried_transactions                                    Yes         Global      No
Slave_running                                      Yes         Global      No
slave-skip-errorsYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
slave_skip_errors                                                            
slave_transaction_retriesYes         Yes         Yes                     Global      Yes
slave_type_conversionsYes         Yes         Yes                     Global      No
Slow_launch_threads                                    Yes         Both        No
slow_launch_timeYes         Yes         Yes                     Global      Yes
Slow_queries                                       Yes         Both        No
slow-query-log Yes         Yes                                 Global      Yes
- _Variable_:                          Yes                     Global      Yes
slow_query_log                                                             
slow_query_log_fileYes         Yes         Yes                     Global      Yes
slow-start-timeoutYes         Yes                                             
socket         Yes         Yes         Yes                     Global      No
sort_buffer_sizeYes         Yes         Yes                     Both        Yes
Sort_merge_passes                                    Yes         Both        No
Sort_range                                         Yes         Both        No
Sort_rows                                          Yes         Both        No
Sort_scan                                          Yes         Both        No
sporadic-binlog-dump-failYes         Yes                                             
sql_auto_is_null                        Yes                     Both        Yes
sql_big_selects                        Yes                     Both        Yes
sql_big_tables                         Yes                     Both        Yes
sql_buffer_result                        Yes                     Both        Yes
sql_log_bin                            Yes                     Both        Yes
sql_log_off                            Yes                     Both        Yes
sql_log_update                         Yes                     Session     Yes
sql_low_priority_updates                        Yes                     Both        Yes
sql_max_join_size                        Yes                     Both        Yes
sql-mode       Yes         Yes                                 Both        Yes
- _Variable_:                          Yes                     Both        Yes
sql_mode                                                                   
sql_notes                              Yes                     Both        Yes
sql_quote_show_create                        Yes                     Both        Yes
sql_safe_updates                        Yes                     Both        Yes
sql_select_limit                        Yes                     Both        Yes
sql_slave_skip_counter                        Yes                     Global      Yes
sql_warnings                           Yes                     Both        Yes
ssl            Yes         Yes                                             
Ssl_accept_renegotiates                                    Yes         Global      No
Ssl_accepts                                        Yes         Global      No
ssl-ca         Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
ssl_ca                                                                     
Ssl_callback_cache_hits                                    Yes         Global      No
ssl-capath     Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
ssl_capath                                                                 
ssl-cert       Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
ssl_cert                                                                   
ssl-cipher     Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
ssl_cipher                                                                 
Ssl_cipher                                         Yes         Both        No
Ssl_cipher_list                                    Yes         Both        No
Ssl_client_connects                                    Yes         Global      No
Ssl_connect_renegotiates                                    Yes         Global      No
Ssl_ctx_verify_depth                                    Yes         Global      No
Ssl_ctx_verify_mode                                    Yes         Global      No
Ssl_default_timeout                                    Yes         Both        No
Ssl_finished_accepts                                    Yes         Global      No
Ssl_finished_connects                                    Yes         Global      No
ssl-key        Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
ssl_key                                                                    
Ssl_session_cache_hits                                    Yes         Global      No
Ssl_session_cache_misses                                    Yes         Global      No
Ssl_session_cache_mode                                    Yes         Global      No
Ssl_session_cache_overflows                                    Yes         Global      No
Ssl_session_cache_size                                    Yes         Global      No
Ssl_session_cache_timeouts                                    Yes         Global      No
Ssl_sessions_reused                                    Yes         Both        No
Ssl_used_session_cache_entries                                    Yes         Global      No
Ssl_verify_depth                                    Yes         Both        No
Ssl_verify_mode                                    Yes         Both        No
ssl-verify-server-certYes         Yes                                             
Ssl_version                                        Yes         Both        No
standalone     Yes         Yes                                             
storage_engine                         Yes                     Both        Yes
stored_program_cacheYes         Yes         Yes                     Global      Yes
super-large-pagesYes         Yes                                             
symbolic-links Yes         Yes                                             
sync_binlog    Yes         Yes         Yes                     Global      Yes
sync_frm       Yes         Yes         Yes                     Global      Yes
sync_master_infoYes         Yes         Yes                     Global      Yes
sync_relay_log Yes         Yes         Yes                     Global      Yes
sync_relay_log_infoYes         Yes         Yes                     Global      Yes
sysdate-is-now Yes         Yes                                             
system_time_zone                        Yes                     Global      No
table_definition_cache                        Yes                     Global      Yes
table_lock_wait_timeoutYes         Yes         Yes                     Global      Yes
Table_locks_immediate                                    Yes         Global      No
Table_locks_waited                                    Yes         Global      No
table_open_cache                        Yes                     Global      Yes
table_type                             Yes                     Both        Yes
tc-heuristic-recoverYes         Yes                                             
Tc_log_max_pages_used                                    Yes         Global      No
Tc_log_page_size                                    Yes         Global      No
Tc_log_page_waits                                    Yes         Global      No
temp-pool      Yes         Yes                                             
thread_cache_sizeYes         Yes         Yes                     Global      Yes
thread_concurrencyYes         Yes         Yes                     Global      No
thread_handlingYes         Yes         Yes                     Global      No
thread_pool_algorithmYes         Yes         Yes                     Global      No
thread_pool_high_priority_connectionYes         Yes         Yes                     Both        Yes
thread_pool_max_unused_threadsYes         Yes         Yes                     Global      Yes
thread_pool_prio_kickup_timerYes         Yes         Yes                     Both        Yes
thread_pool_sizeYes         Yes         Yes                     Global      No
thread_pool_stall_limitYes         Yes         Yes                     Global      Yes
thread_stack   Yes         Yes         Yes                     Global      No
Threads_cached                                     Yes         Global      No
Threads_connected                                    Yes         Global      No
Threads_created                                    Yes         Global      No
Threads_running                                    Yes         Global      No
time_format                            Yes                     Global      No
time_zone                              Yes                     Both        Yes
timed_mutexes  Yes         Yes         Yes                     Global      Yes
timestamp                              Yes                     Session     Yes
tmp_table_size Yes         Yes         Yes                     Both        Yes
tmpdir         Yes         Yes         Yes                     Global      No
transaction_alloc_block_sizeYes         Yes         Yes                     Both        Yes
transaction_allow_batching                        Yes                     Session     Yes
transaction-isolationYes         Yes                                             
- _Variable_:                                                              
tx_isolation                                                               
transaction_prealloc_sizeYes         Yes         Yes                     Both        Yes
tx_isolation                           Yes                     Both        Yes
unique_checks                          Yes                     Both        Yes
updatable_views_with_limitYes         Yes         Yes                     Both        Yes
Uptime                                             Yes         Global      No
Uptime_since_flush_status                                    Yes         Global      No
user           Yes         Yes                                             
verbose        Yes         Yes                                             
version                                Yes                     Global      No
version_comment                        Yes                     Global      No
version_compile_machine                        Yes                     Global      No
version_compile_os                        Yes                     Global      No
wait_timeout   Yes         Yes         Yes                     Both        Yes
warning_count                          Yes                     Session     No


File: manual.info,  Node: server-configuration-defaults,  Next: server-options,  Prev: mysqld-option-tables,  Up: mysqld-server

5.1.2 Server Configuration Defaults
-----------------------------------

The MySQL server has many operating parameters, which you can change at
server startup using command-line options or configuration files
(option files). It is also possible to change many parameters at
runtime. For general instructions on setting parameters at startup or
runtime, see *Note server-options::, and *Note
server-system-variables::.

MySQL provides a number of preconfigured option files that can be used
as a basis for tuning the MySQL server. Look for files named
`my-small.cnf', `my-medium.cnf', `my-large.cnf', and `my-huge.cnf',
which are sample option files for small, medium, large, and very large
systems. On Windows, the extension is `.ini' rather than `.cnf'.

*Note*:

On Windows, the `.ini' or `.cnf' option file extension might not be
displayed.

For a binary distribution, look for the sample files in or under your
installation directory. If you have a source distribution, look in the
`support-files' directory. To use a sample file as a base configuration
file, rename a copy of it and place the copy in the appropriate
location. Regarding names and appropriate location, see the general
information provided in *Note option-files::. That section also
describes option file format and syntax.


File: manual.info,  Node: server-options,  Next: server-system-variables,  Prev: server-configuration-defaults,  Up: mysqld-server

5.1.3 Server Command Options
----------------------------

When you start the *Note `mysqld': mysqld. server, you can specify
program options using any of the methods described in *Note
program-options::. The most common methods are to provide options in an
option file or on the command line. However, in most cases it is
desirable to make sure that the server uses the same options each time
it runs. The best way to ensure this is to list them in an option file.
See *Note option-files::.

*Note `mysqld': mysqld. reads options from the `[mysqld]' and `[server]'
groups. *Note `mysqld_safe': mysqld-safe. reads options from the
`[mysqld]', `[server]', `[mysqld_safe]', and `[safe_mysqld]' groups.
*Note `mysql.server': mysql-server. reads options from the `[mysqld]'
and `[mysql.server]' groups.

An embedded MySQL server usually reads options from the `[server]',
`[embedded]', and `[XXXXX_SERVER]' groups, where XXXXX is the name of
the application into which the server is embedded.

*Note `mysqld': mysqld. accepts many command options. For a brief
summary, execute *Note `mysqld --help': mysqld. To see the full list,
use *Note `mysqld --verbose --help': mysqld.

The following list shows some of the most common server options.
Additional options are described in other sections:

   * Options that affect security: See *Note security-options::.

   * SSL-related options: See *Note ssl-options::.

   * Binary log control options: See *Note binary-log::.

   * Replication-related options: See *Note replication-options::.

   * Options for loading plugins such as pluggable storage engines: See
     *Note server-plugin-loading::.

   * Options specific to particular storage engines: See *Note
     innodb-parameters::, *Note myisam-start::, and *Note
     mysql-cluster-program-options-mysqld::.

You can also set the values of server system variables by using
variable names as options, as described at the end of this section.

Some options control the size of buffers or caches. For a given buffer,
the server might need to allocate internal data structures. These
structures typically are allocated from the total memory allocated to
the buffer, and the amount of space required might be platform
dependent. This means that when you assign a value to an option that
controls a buffer size, the amount of space actually available might
differ from the value assigned. In some cases, the amount might be less
than the value assigned. It is also possible that the server will
adjust a value upward. For example, if you assign a value of 0 to an
option for which the minimal value is 1024, the server will set the
value to 1024.

Values for buffer sizes, lengths, and stack sizes are given in bytes
unless otherwise specified.

Some options take file name values. Unless otherwise specified, the
default file location is the data directory if the value is a relative
path name. To specify the location explicitly, use an absolute path
name. Suppose that the data directory is `/var/mysql/data'. If a
file-valued option is given as a relative path name, it will be located
under `/var/mysql/data'. If the value is an absolute path name, its
location is as given by the path name.

   *  `--help', `-?'

     Options for help

     *Command-Line        `-?'            
     Format*                              
                          `--help'        
     *Option-File Format* `help'          

     Display a short help message and exit. Use both the `--verbose' and
     `--help' options to see the full message.

   *  `--allow-suspicious-udfs'

     Options for allow-suspicious-udfs

     *Command-Line        `--allow-suspicious-udfs'        
     Format*                              
     *Option-File Format* `allow-suspicious-udfs'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     This option controls whether user-defined functions that have only
     an `xxx' symbol for the main function can be loaded. By default,
     the option is off and only UDFs that have at least one auxiliary
     symbol can be loaded; this prevents attempts at loading functions
     from shared object files other than those containing legitimate
     UDFs. See *Note udf-security::.

   *  `--ansi'

     Options for ansi

     *Command-Line        `--ansi'        
     Format*                              
                          `-a'            
     *Option-File Format* `ansi'          

     Use standard (ANSI) SQL syntax instead of MySQL syntax. For more
     precise control over the server SQL mode, use the `--sql-mode'
     option instead. See *Note ansi-mode::, and *Note server-sql-mode::.

   *  `--basedir=PATH', `-b PATH'

     Options for basedir

     *Command-Line        `--basedir=path'        
     Format*                              
                          `-b'            
     *Option-File Format* `basedir'        
     *System Variable     `basedir'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The path to the MySQL installation directory. All paths are
     usually resolved relative to this directory.

   *  `--big-tables'

     Options for big-tables

     *Command-Line        `--big-tables'        
     Format*                              
     *Option-File Format* `big-tables'        
     *System Variable     `big_tables'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        

     Enable large result sets by saving all temporary sets in files.
     This option prevents most `table full' errors, but also slows down
     queries for which in-memory tables would suffice. Since MySQL
     3.23.2, the server is able to handle large result sets
     automatically by using memory for small temporary tables and
     switching to disk tables where necessary.

   *  `--bind-address=ADDR'

     Options for bind-address

     *Command-Line        `--bind-address=addr'        
     Format*                              
     *Option-File Format* `bind-address'        
     *System Variable     `bind_address'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `0.0.0.0'        

     The MySQL server listens on a single network socket for TCP/IP
     connections. This socket is bound to a single address, but it is
     possible for an address to map onto multiple network interfaces.
     The default address is `0.0.0.0'.  To specify an address
     explicitly, use the `--bind-address=ADDR' option at server
     startup, where ADDR is an IPv4 or IPv6 address or a host name.
     (IPv6 addresses are not supported before MySQL 5.5.3.) If ADDR is
     a host name, the server resolves the name to an IP address and
     binds to that address.

     The server treats different types of addresses as follows:

        * If the address is `0.0.0.0', the server accepts TCP/IP
          connections on all server host IPv4 interfaces.

        * If the address is `::', the server accepts TCP/IP connections
          on all server host IPv4 and IPv6 interfaces. Use this address
          to permit both IPv4 and IPv6 connections on all server
          interfaces.

        * If the address is an IPv4-mapped address, the server accepts
          TCP/IP connections for that address, in either IPv4 or IPv6
          format. For example, if the server is bound to
          `::ffff:127.0.0.1', clients can connect using
          `--host=127.0.0.1' or `--host=::ffff:127.0.0.1'.

        * If the address is a `regular' IPv4 or IPv6 address (such as
          `127.0.0.1' or `::1'), the server accepts TCP/IP connections
          only for that IPv4 or IPv6 address.

     If you intend to bind the server to a specific address, be sure
     that the `mysql.user' grant table contains an account with
     administrative privileges that you can use to connect to that
     address. Otherwise, you will not be able to shut down the server.
     For example, if you bind the server to `::', you can connect to it
     using all existing accounts. But if you bind the server to `::1',
     it accepts connections only on that address. In that case, first
     make sure that the `'root'@'::1'' account is present in the
     `mysql.user' table so you can still connect to the server to shut
     it down.

   *  `--binlog-format={ROW|STATEMENT|MIXED}'

     Options for binlog-format

     *Command-Line        `--binlog-format=format'        
     Format*                              
     *Option-File Format* `binlog-format'        
     *System Variable     `binlog_format'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `STATEMENT'        
     *Valid Values*       `ROW'           
     `STATEMENT'                          
     `MIXED'                              

     Specify whether to use row-based, statement-based, or mixed
     replication. Statement-based is the default in MySQL 5.5. This is
     also true for MySQL Cluster NDB 7.2.1 and later. See *Note
     replication-formats::.

     Under some conditions, changing this variable at runtime is not
     possible, or causes replication to fail. See *Note
     binary-log-setting::, for more information.

     Prior to MySQL 5.5, setting the binary logging format without
     enabling binary logging prevented the MySQL server from starting.
     In MySQL 5.5, the server starts in such cases, the `binlog_format'
     global system variable is set, and a warning is logged instead of
     an error. (Bug #42928)

   *  `--bootstrap'

     Options for bootstrap

     *Command-Line        `--bootstrap'        
     Format*                              
     *Option-File Format* `bootstrap'        

     This option is used by the *Note `mysql_install_db':
     mysql-install-db.  script to create the MySQL privilege tables
     without having to start a full MySQL server.

   *  `--character-sets-dir=PATH'

     Options for character-sets-dir

     *Command-Line        `--character-sets-dir=path'        
     Format*                              
     *Option-File Format* `character-sets-dir'        
     *System Variable     `character_sets_dir'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `directory        
                          name'           

     The directory where character sets are installed. See *Note
     charset-configuration::.

   *  `--character-set-client-handshake'

     Options for character-set-client-handshake

     *Command-Line        `--character-set-client-handshake'        
     Format*                              
     *Option-File Format* `character-set-client-handshake'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `TRUE'          

     Do not ignore character set information sent by the client. To
     ignore client information and use the default server character
     set, use `--skip-character-set-client-handshake'; this makes MySQL
     behave like MySQL 4.0.

   *  `--character-set-filesystem=CHARSET_NAME'

     Options for character-set-filesystem

     *Command-Line        `--character-set-filesystem=name'        
     Format*                              
     *Option-File Format* `character-set-filesystem'        
     *System Variable     `character_set_filesystem'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The file system character set. This option sets the
     `character_set_filesystem' system variable.

   *  `--character-set-server=CHARSET_NAME', `-C CHARSET_NAME'

     Options for character-set-server

     *Command-Line        `--character-set-server'        
     Format*                              
     *Option-File Format* `character-set-server'        
     *System Variable     `character_set_server'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        

     Use CHARSET_NAME as the default server character set. See *Note
     charset-configuration::. If you use this option to specify a
     nondefault character set, you should also use `--collation-server'
     to specify the collation.

   *  `--chroot=PATH', `-r PATH'

     Options for chroot

     *Command-Line        `--chroot=name'        
     Format*                              
                          `-r             
                          name'           
     *Option-File Format* `chroot'        
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     Put the *Note `mysqld': mysqld. server in a closed environment
     during startup by using the `chroot()' system call. This is a
     recommended security measure. Note that use of this option
     somewhat limits *Note `LOAD DATA INFILE': load-data. and *Note
     `SELECT ... INTO OUTFILE': select-into.

   *  `--collation-server=COLLATION_NAME'

     Options for collation-server

     *Command-Line        `--collation-server'        
     Format*                              
     *Option-File Format* `collation-server'        
     *System Variable     `collation_server'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        

     Use COLLATION_NAME as the default server collation. See *Note
     charset-configuration::.

   *  `--console'

     Options for console

     *Command-Line        `--console'        
     Format*                              
     *Option-File Format* `console'        
     *Platform Specific*  windows         

     (Windows only.) Write error log messages to `stderr' and `stdout'.
     *Note `mysqld': mysqld. does not close the console window if this
     option is used.

     As of MySQL 5.5.3, if both `--log-error' and `--console' are
     specified, `--log-error' takes precedence.  The server writes to
     the log file, but not to the console.  Before 5.5.3, whichever
     option is given last takes precedence.

   *  `--core-file'

     Options for core-file

     *Command-Line        `--core-file'        
     Format*                              
     *Option-File Format* `core-file'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Write a core file if *Note `mysqld': mysqld. dies. The name and
     location of the core file is system dependent. On Linux, a core
     file named `core.PID' is written to the current working directory
     of the process, which for *Note `mysqld': mysqld. is the data
     directory.  PID represents the process ID of the server process.
     On Mac OS X, a core file named `core.PID' is written to the
     `/cores' directory. On Solaris, use the `coreadm' command to
     specify where to write the core file and how to name it.

     For some systems, to get a core file you must also specify the
     `--core-file-size' option to *Note `mysqld_safe': mysqld-safe. See
     *Note mysqld-safe::. On some systems, such as Solaris, you do not
     get a core file if you are also using the `--user' option. There
     might be additional restrictions or limitations. For example, it
     might be necessary to execute `ulimit -c unlimited' before
     starting the server. Consult your system documentation.

   *  `--datadir=PATH', `-h PATH'

     Options for datadir

     *Command-Line        `--datadir=path'        
     Format*                              
                          `-h'            
     *Option-File Format* `datadir'        
     *System Variable     `datadir'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The path to the data directory.

   *  `--debug[=DEBUG_OPTIONS]', `-# [DEBUG_OPTIONS]'

     Options for debug

     *Command-Line        `--debug[=debug_options]'        
     Format*                              
     *Option-File Format* `debug'         
     *System Variable     `debug'         
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `'d:t:o,/tmp/mysqld.trace''        

     If MySQL is configured with `-DWITH_DEBUG=1', you can use this
     option to get a trace file of what *Note `mysqld': mysqld.  is
     doing. A typical DEBUG_OPTIONS string is `'d:t:o,FILE_NAME''.  The
     default is `'d:t:i:o,mysqld.trace''.

     Using `-DWITH_DEBUG=1' to configure MySQL with debugging support
     enables you to use the `--debug="d,parser_debug"' option when you
     start the server. This causes the Bison parser that is used to
     process SQL statements to dump a parser trace to the server's
     standard error output. Typically, this output is written to the
     error log.

     This option may be given multiple times. Values that begin with
     `+' or `-' are added to or subtracted from the previous value. For
     example, `--debug=T' `--debug=+P' sets the value to `P:T'.

     For more information, see *Note dbug-package::.

   *  `--debug-sync-timeout[=N]'

     Options for debug-sync-timeout

     *Command-Line        `--debug-sync-timeout[=#]'        
     Format*                              
     *Option-File Format* `debug-sync-timeout'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        

     Controls whether the Debug Sync facility for testing and debugging
     is enabled. Use of Debug Sync requires that MySQL be configured
     with the `-DENABLE_DEBUG_SYNC=1' option (see *Note
     source-configuration-options::). If Debug Sync is not compiled in,
     this option is not available. The option value is a timeout in
     seconds. The default value is 0, which disables Debug Sync. To
     enable it, specify a value greater than 0; this value also becomes
     the default timeout for individual synchronization points. If the
     option is given without a value, the timeout is set to 300 seconds.

     For a description of the Debug Sync facility and how to use
     synchronization points, see MySQL Internals: Test Synchronization
     (http://dev.mysql.com/doc/internals/en/test-synchronization.html).

   *  `--default-character-set=CHARSET_NAME'

     Options for default-character-set

     *Deprecated*         5.0.0           
     *Command-Line        `--default-character-set=name'        
     Format*                              
                          `-C             
                          name'           
     *Option-File Format* `default-character-set'        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     Use CHARSET_NAME as the default character set. This option is
     deprecated in favor of `--character-set-server'. See *Note
     charset-configuration::.  `--default-character-set' was removed in
     MySQL 5.5.3.

   *  `--default-collation=COLLATION_NAME'

     Options for default-collation

     *Deprecated*         4.1.3           
     *Command-Line        `--default-collation=name'        
     Format*                              
     *Option-File Format* `default-collation'        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     Use COLLATION_NAME as the default collation. This option is
     deprecated in favor of `--collation-server'. See *Note
     charset-configuration::.  `--default-collation' was removed in
     MySQL 5.5.3.

   *  `--default-storage-engine=TYPE'

     Options for default-storage-engine

     *Command-Line        `--default-storage-engine=name'        
     Format*                              
     *Option-File Format* `default-storage-engine'        
     *System Variable     `default_storage_engine'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values          
                          (<=             
                          5.5.4)*         
     *Type*               `enumeration'        
     *Default*            `MyISAM'        
                          *Permitted        
                          Values          
                          (>=             
                          5.5.5)*         
     *Type*               `enumeration'        
     *Default*            `InnoDB'        

     Set the default storage engine (table type) for tables. See *Note
     storage-engines::.

     If you disable the default storage engine at server startup, you
     must set the default engine to a different engine or the server
     will not start.

   *  `--default-time-zone=TIMEZONE'

     Options for default-time-zone

     *Command-Line        `--default-time-zone=name'        
     Format*                              
     *Option-File Format* `default-time-zone'        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     Set the default server time zone. This option sets the global
     `time_zone' system variable. If this option is not given, the
     default time zone is the same as the system time zone (given by
     the value of the `system_time_zone' system variable.

   *  `--delay-key-write[={OFF|ON|ALL}]'

     Options for delay-key-write

     *Command-Line        `--delay-key-write[=name]'        
     Format*                              
     *Option-File Format* `delay-key-write'        
     *System Variable     `delay_key_write'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `ON'            
     *Valid Values*       `ON'            
     `OFF'                                
     `ALL'                                

     Specify how to use delayed key writes. Delayed key writing causes
     key buffers not to be flushed between writes for `MyISAM' tables.
     `OFF' disables delayed key writes. `ON' enables delayed key writes
     for those tables that were created with the `DELAY_KEY_WRITE'
     option.  `ALL' delays key writes for all `MyISAM' tables. See
     *Note server-parameters::, and *Note myisam-start::.

     *Note*:

     If you set this variable to `ALL', you should not use `MyISAM'
     tables from within another program (such as another MySQL server or
     *Note `myisamchk': myisamchk.) when the tables are in use.  Doing
     so leads to index corruption.

   *  `--des-key-file=FILE_NAME'

     Options for des-key-file

     *Command-Line        `--des-key-file=file_name'        
     Format*                              
     *Option-File Format* `des-key-file'        

     Read the default DES keys from this file. These keys are used by
     the `DES_ENCRYPT()' and `DES_DECRYPT()' functions.

   *  `--enable-locking'

     This option is deprecated and was removed in MySQL 5.5.3. Use
     `--external-locking' instead.

   *  `--enable-named-pipe'

     Options for enable-named-pipe

     *Command-Line        `--enable-named-pipe'        
     Format*                              
     *Option-File Format* `enable-named-pipe'        
     *Platform Specific*  windows         

     Enable support for named pipes. This option applies only on
     Windows.

   *  `--enable-pstack'

     Options for enable-pstack

     *Deprecated*         5.1.54          
     *Removed*            5.5.7           
     *Command-Line        `--enable-pstack'        
     Format*                              
     *Option-File Format* `enable-pstack'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     This option is nonfunctional before MySQL 5.5.7 and removed in
     5.5.7.

   *  `--engine-condition-pushdown={ON|OFF}'

     Options for engine-condition-pushdown

     *Deprecated*         5.5.3,          
                          by              
                          optimizer_switch        
     *Command-Line        `--engine-condition-pushdown'        
     Format*                              
     *Option-File Format* `engine-condition-pushdown'        
     *System Variable     `engine_condition_pushdown'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            

     Sets the `engine_condition_pushdown' system variable. For more
     information, see *Note condition-pushdown-optimization::.

   *  `--event-scheduler[=VALUE]'

     Options for event-scheduler

     *Command-Line        `--event-scheduler[=value]'        
     Format*                              
     *Option-File Format* `event-scheduler'        
     *System Variable     `event_scheduler'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `OFF'           
     *Valid Values*       `ON'            
     `OFF'                                
     `DISABLED'                           

     Enable or disable, and start or stop, the event scheduler.

     For detailed information, see The `--event-scheduler' Option.

   *  `--exit-info[=FLAGS]', `-T [FLAGS]'

     Options for exit-info

     *Command-Line        `--exit-info[=flags]'        
     Format*                              
                          `-T             
                          [flags]'        
     *Option-File Format* `exit-info'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        

     This is a bit mask of different flags that you can use for
     debugging the *Note `mysqld': mysqld. server. Do not use this
     option unless you know _exactly_ what it does!

   *  `--external-locking'

     Options for external-locking

     *Command-Line        `--external-locking'        
     Format*                              
     *Option-File Format* `external-locking'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Enable external locking (system locking), which is disabled by
     default as of MySQL 4.0. Note that if you use this option on a
     system on which `lockd' does not fully work (such as Linux), it is
     easy for *Note `mysqld': mysqld. to deadlock.

     To disable external locking explicitly, use
     `--skip-external-locking'.

     External locking affects only *Note `MyISAM':
     myisam-storage-engine. table access. For more information,
     including conditions under which it can and cannot be used, see
     *Note external-locking::.

   *  `--flush'

     Options for flush

     *Command-Line        `--flush'        
     Format*                              
     *Option-File Format* `flush'         
     *System Variable     `flush'         
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Flush (synchronize) all changes to disk after each SQL statement.
     Normally, MySQL does a write of all changes to disk only after
     each SQL statement and lets the operating system handle the
     synchronizing to disk. See *Note crashing::.

   *  `--gdb'

     Options for gdb

     *Command-Line        `--gdb'         
     Format*                              
     *Option-File Format* `gdb'           
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Install an interrupt handler for `SIGINT' (needed to stop *Note
     `mysqld': mysqld. with `^C' to set breakpoints) and disable stack
     tracing and core file handling. See *Note porting::.

   *  `--general-log[={0|1}]'

     Options for general-log

     *Command-Line        `--general-log'        
     Format*                              
     *Option-File Format* `general-log'        
     *System Variable     `general_log'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Specify the initial general query log state. With no argument or
     an argument of 1, the `--general-log' option enables the log. If
     omitted or given with an argument of 0, the option disables the
     log.

   *  `--init-file=FILE_NAME'

     Options for init-file

     *Command-Line        `--init-file=file_name'        
     Format*                              
     *Option-File Format* `init-file'        
     *System Variable     `init_file'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     Read SQL statements from this file at startup. Each statement must
     be on a single line and should not include comments.

   * `--innodb-XXX'

     Set an option for the `InnoDB' storage engine. The `InnoDB'
     options are listed in *Note innodb-parameters::.

   *  `--install [SERVICE_NAME]'

     Options for install

     *Command-Line        `--install        
     Format*              [service_name]'        

     (Windows only) Install the server as a Windows service that starts
     automatically during Windows startup. The default service name is
     `MySQL' if no SERVICE_NAME value is given. For more information,
     see *Note windows-start-service::.

     *Note*:

     If the server is started with the `--defaults-file' and
     `--install' options, `--install' must be first.

   *  `--install-manual [SERVICE_NAME]'

     Options for install-manual

     *Command-Line        `--install-manual        
     Format*              [service_name]'        

     (Windows only) Install the server as a Windows service that must
     be started manually. It does not start automatically during
     Windows startup. The default service name is `MySQL' if no
     SERVICE_NAME value is given. For more information, see *Note
     windows-start-service::.

     *Note*:

     If the server is started with the `--defaults-file' and
     `--install-manual' options, `--install-manual' must be first.

   *  `--language=LANG_NAME, -L LANG_NAME'

     Options for language

     *Deprecated*         5.5.0,          
                          by              
                          lc-messages-dir        
     *Command-Line        `--language=name'        
     Format*                              
                          `-L'            
     *Option-File Format* `language'        
     *System Variable     `language'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `directory        
                          name'           
     *Default*            `/usr/local/mysql/share/mysql/english/'        

     The language to use for error messages.  LANG_NAME can be given as
     the language name or as the full path name to the directory where
     the language files are installed. See *Note
     error-message-language::.

     As of MySQL 5.5, `--lc-messages-dir' and `--lc-messages' should be
     used rather than `--language', which is deprecated and handled as
     an alias for `--lc-messages-dir'.

   *  `--large-pages'

     Options for large-pages

     *Command-Line        `--large-pages'        
     Format*                              
     *Option-File Format* `large-pages'        
     *System Variable     `large_pages'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
     *Platform Specific*  linux           
                          *Permitted        
                          Values*         
     *Type* (linux)       `boolean'        
     *Default*            `FALSE'         

     Some hardware/operating system architectures support memory pages
     greater than the default (usually 4KB). The actual implementation
     of this support depends on the underlying hardware and operating
     system. Applications that perform a lot of memory accesses may
     obtain performance improvements by using large pages due to
     reduced Translation Lookaside Buffer (TLB) misses.

     MySQL 5.5 supports the Linux implementation of large page support
     (which is called HugeTLB in Linux). See *Note
     large-page-support::. For Solaris support of large pages, see the
     description of the `--super-large-pages' option.

     `--large-pages' is disabled by default.

   *  `--lc-messages=LOCALE_NAME'

     Options for lc-messages

     *Command-Line        `--lc-messages=name'        
     Format*                              
     *Option-File Format* `lc-messages'        
     *System Variable     `lc_messages'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The locale to use for error messages. The server converts the
     argument to a language name and combines it with the value of the
     `--lc-messages-dir' to produce the location for the error message
     file. See *Note error-message-language::.

   *  `--lc-messages-dir=PATH'

     Options for lc-messages-dir

     *Command-Line        `--lc-messages-dir=path'        
     Format*                              
     *Option-File Format* `lc-messages-dir'        
     *System Variable     `lc_messages_dir'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `directory        
                          name'           

     The directory where error messages are located. The value is used
     together with the value of `--lc-messages' to produce the location
     for the error message file. See *Note error-message-language::.

   *  `--log[=FILE_NAME]', `-l [FILE_NAME]'

     Options for log

     *Deprecated*         5.1.29,         
                          by              
                          general-log        
     *Command-Line        `--log[=name]'        
     Format*                              
                          `-l'            
     *Option-File Format* `log'           
     *System Variable     `log'           
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `OFF'           

     This option enables logging to the general query log, which
     contains entries that record client connections and SQL statements
     received from clients. The log output destination can be selected
     with the `--log-output' option. If you omit the file name, MySQL
     uses `HOST_NAME.log' as the file name. See *Note
     log-destinations::, and *Note query-log::.

     The `--log' option is deprecated and is removed (along with the
     `log' system variable) in MySQL 5.6. Instead, use the
     `--general_log' option to enable the general query log and the
     `--general_log_file=FILE_NAME' option to set the general query log
     file name.

   *  `--log-error[=FILE_NAME]'

     Options for log-error

     *Command-Line        `--log-error[=name]'        
     Format*                              
     *Option-File Format* `log-error'        
     *System Variable     `log_error'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     Log errors and startup messages to this file. See *Note
     error-log::. If you omit the file name, MySQL uses `HOST_NAME.err'.
     If the file name has no extension, the server adds an extension of
     `.err'.

   *  `--log-isam[=FILE_NAME]'

     Options for log-isam

     *Command-Line        `--log-isam[=name]'        
     Format*                              
     *Option-File Format* `log-isam'        
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     Log all `MyISAM' changes to this file (used only when debugging
     `MyISAM').

   *  `--log-long-format'

     Options for log-long-format

     *Deprecated*         4.1.0           
     *Command-Line        `--log-long-format'        
     Format*                              
                          `-0'            
     *Option-File Format* `log-long-format'        

     Log extra information to the binary log and slow query log, if
     they have been activated. For example, the user name and timestamp
     are logged for all queries. This option is deprecated, as it now
     represents the default logging behavior.  (See the description for
     `--log-short-format'.) The `--log-queries-not-using-indexes'
     option is available for the purpose of logging queries that do not
     use indexes to the slow query log.  `--log-long-format' was removed
     in MySQL 5.5.3.

   *  `--log-output=VALUE,...'

     Options for log-output

     *Command-Line        `--log-output=name'        
     Format*                              
     *Option-File Format* `log-output'        
     *System Variable     `log_output'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `set'           
     *Default*            `FILE'          
     *Valid Values*       `TABLE'         
     `FILE'                               
     `NONE'                               

     This option determines the destination for general query log and
     slow query log output. The option value can be given as one or
     more of the words `TABLE', `FILE', or `NONE'.  `TABLE' select
     logging to the `general_log' and `slow_log' tables in the `mysql'
     database as a destination.  `FILE' selects logging to log files as
     a destination. `NONE' disables logging. If `NONE' is present in
     the option value, it takes precedence over any other words that
     are present.  `TABLE' and `FILE' can both be given to select to
     both log output destinations.

     This option selects log output destinations, but does not enable
     log output. To do that, use the `--general_log' and
     `--slow_query_log' options. For `FILE' logging, the
     `--general_log_file' and `-slow_query_log_file' options determine
     the log file location. For more information, see *Note
     log-destinations::.

   *  `--log-queries-not-using-indexes'

     Options for log-queries-not-using-indexes

     *Command-Line        `--log-queries-not-using-indexes'        
     Format*                              
     *Option-File Format* `log-queries-not-using-indexes'        
     *System Variable     `log_queries_not_using_indexes'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     If you are using this option with the slow query log enabled,
     queries that are expected to retrieve all rows are logged. See
     *Note slow-query-log::. This option does not necessarily mean that
     no index is used. For example, a query that uses a full index scan
     uses an index but would be logged because the index would not
     limit the number of rows.

   *  `--log-short-format'

     Options for log-short-format

     *Command-Line        `--log-short-format'        
     Format*                              
     *Option-File Format* `log-short-format'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Log less information to the binary log and slow query log, if they
     have been activated.

   *  `--log-slow-admin-statements'

     Options for log-slow-admin-statements

     *Command-Line        `--log-slow-admin-statements'        
     Format*                              
     *Option-File Format* `log-slow-admin-statements'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Include slow administrative statements in the statements written
     to the slow query log. Administrative statements include *Note
     `ALTER TABLE': alter-table, *Note `ANALYZE TABLE': analyze-table,
     *Note `CHECK TABLE': check-table, *Note `CREATE INDEX':
     create-index, *Note `DROP INDEX': drop-index, *Note `OPTIMIZE
     TABLE': optimize-table, and *Note `REPAIR TABLE': repair-table.

   *  `--log-slow-queries[=FILE_NAME]'

     Options for log-slow-queries

     *Deprecated*         5.1.29,         
                          by              
                          slow-query-log        
     *Command-Line        `--log-slow-queries[=name]'        
     Format*                              
     *Option-File Format* `log-slow-queries'        
     *System Variable     `log_slow_queries'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        

     This option enables logging to the slow query log, which contains
     entries for all queries that have taken more than
     `long_query_time' seconds to execute. See the descriptions of the
     `--log-long-format' and `--log-short-format' options for details.
     The log output destination can be selected with the `--log-output'
     option. If you omit the file name, MySQL uses `HOST_NAME-slow.log'
     as the file name. See *Note log-destinations::, and *Note
     slow-query-log::.

     The `--log-slow-queries' option is deprecated and is removed
     (along with the `log_slow_queries' system variable) in MySQL 5.6.
     Instead, use the `--slow_query_log' option to enable the slow
     query log and the `--slow_query_log_file=FILE_NAME' option to set
     the slow query log file name.

   *  `--log-tc=FILE_NAME'

     Options for log-tc

     *Command-Line        `--log-tc=name'        
     Format*                              
     *Option-File Format* `log-tc'        
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           
     *Default*            `tc.log'        

     The name of the memory-mapped transaction coordinator log file
     (for XA transactions that affect multiple storage engines when the
     binary log is disabled). The default name is `tc.log'. The file is
     created under the data directory if not given as a full path name.
     Currently, this option is unused.

   *  `--log-tc-size=SIZE'

     Options for log-tc-size

     *Command-Line        `--log-tc-size=#'        
     Format*                              
     *Option-File Format* `log-tc-size'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `24576'         
     *Max Value*          `4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `24576'         
     *Max Value*          `18446744073709547520'        

     The size in bytes of the memory-mapped transaction coordinator
     log. The default size is 24KB.

   *  `--log-warnings[=LEVEL]', `-W [LEVEL]'

     Options for log-warnings

     *Command-Line        `--log-warnings[=#]'        
     Format*                              
                          `-W             
                          [#]'            
     *Option-File Format* `log-warnings[=#]'        
     *System Variable     `log_warnings'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `1'             
     *Range*              `0 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `1'             
     *Range*              `0 ..           
                          18446744073709547520'        

     Print out warnings such as `Aborted connection...' to the error
     log. This option is enabled (1) by default. To disable it, use
     `--log-warnings=0'. Specifying the option without a LEVEL value
     increments the current value by 1. Enabling this option by setting
     it greater than 0 is recommended, for example, if you use
     replication (you get more information about what is happening,
     such as messages about network failures and reconnections). If the
     value is greater than 1, aborted connections are written to the
     error log, and access-denied errors for new connection attempts
     are written. See *Note communication-errors::.

     If a slave server was started with `--log-warnings' enabled, the
     slave prints messages to the error log to provide information
     about its status, such as the binary log and relay log coordinates
     where it starts its job, when it is switching to another relay
     log, when it reconnects after a disconnect, and so forth. The
     server logs messages about statements that are unsafe for
     statement-based logging if `--log-warnings' is greater than 0.

   *  `--low-priority-updates'

     Options for low-priority-updates

     *Command-Line        `--low-priority-updates'        
     Format*                              
     *Option-File Format* `low-priority-updates'        
     *System Variable     `low_priority_updates'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Give table-modifying operations (*Note `INSERT': insert, *Note
     `REPLACE': replace, *Note `DELETE': delete, *Note `UPDATE':
     update.) lower priority than selects. This can also be done using
     `{INSERT | REPLACE | DELETE | UPDATE} LOW_PRIORITY ...' to lower
     the priority of only one query, or by `SET LOW_PRIORITY_UPDATES=1'
     to change the priority in one thread. This affects only storage
     engines that use only table-level locking (`MyISAM', `MEMORY',
     `MERGE'). See *Note table-locking::.

   *  `--min-examined-row-limit=NUMBER'

     Options for min-examined-row-limit

     *Command-Line        `--min-examined-row-limit=#'        
     Format*                              
     *Option-File Format* `min-examined-row-limit'        
     *System Variable     `min_examined_row_limit'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          18446744073709547520'        

     When this option is set, queries which examine fewer than NUMBER
     rows are not written to the slow query log. The default is 0.

   *  `--memlock'

     Options for memlock

     *Command-Line        `--memlock'        
     Format*                              
     *Option-File Format* `memlock'        
     *System Variable     `locked_in_memory'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Lock the *Note `mysqld': mysqld. process in memory. This option
     might help if you have a problem where the operating system is
     causing *Note `mysqld': mysqld. to swap to disk.

     `--memlock' works on systems that support the `mlockall()' system
     call; this includes Solaris, most Linux distributions that use a
     2.4 or newer kernel, and perhaps other Unix systems. On Linux
     systems, you can tell whether or not `mlockall()' (and thus this
     option) is supported by checking to see whether or not it is
     defined in the system `mman.h' file, like this:

          shell> grep mlockall /usr/include/sys/mman.h

     If `mlockall()' is supported, you should see in the output of the
     previous command something like the following:

          extern int mlockall (int __flags) __THROW;

     *Important*:

     Use of this option may require you to run the server as `root',
     which, for reasons of security, is normally not a good idea. See
     *Note changing-mysql-user::.

     On Linux and perhaps other systems, you can avoid the need to run
     the server as `root' by changing the `limits.conf' file. See the
     notes regarding the memlock limit in *Note large-page-support::.

     You must not try to use this option on a system that does not
     support the `mlockall()' system call; if you do so, *Note
     `mysqld': mysqld. will very likely crash as soon as you try to
     start it.

   *  `--myisam-block-size=N'

     Options for myisam-block-size

     *Command-Line        `--myisam-block-size=#'        
     Format*                              
     *Option-File Format* `myisam-block-size'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1024'          
     *Range*              `1024           
                          ..              
                          16384'          

     The block size to be used for `MyISAM' index pages.

   *  `--myisam-recover[=OPTION[,OPTION]...]]'

     This option is renamed as of MySQL 5.5.3 to
     `--myisam-recover-options'. See the description of that option for
     more information.

   *  `--myisam-recover-options[=OPTION[,OPTION]...]]'

     Options for myisam-recover-options

     *Introduced*         5.5.3           
     *Command-Line        `--myisam-recover-options[=name]'        
     Format*                              
     *Option-File Format* `myisam-recover-options'        
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `OFF'           
     *Valid Values*       `OFF'           
     `DEFAULT'                            
     `BACKUP'                             
     `FORCE'                              
     `QUICK'                              

     Set the `MyISAM' storage engine recovery mode. The option value is
     any combination of the values of `OFF', `DEFAULT', `BACKUP',
     `FORCE', or `QUICK'. If you specify multiple values, separate them
     by commas. Specifying the option with no argument is the same as
     specifying `DEFAULT', and specifying with an explicit value of `""'
     disables recovery (same as a value of `OFF').  If recovery is
     enabled, each time *Note `mysqld': mysqld.  opens a `MyISAM'
     table, it checks whether the table is marked as crashed or was not
     closed properly. (The last option works only if you are running
     with external locking disabled.) If this is the case, *Note
     `mysqld': mysqld. runs a check on the table. If the table was
     corrupted, *Note `mysqld': mysqld. attempts to repair it.

     The following options affect how the repair works.

     This table describes `--myisam-recover' options.

     Option     Description
     `OFF'      No recovery.
     `DEFAULT'  Recovery without backup, forcing, or quick
                checking.
     `BACKUP'   If the data file was changed during recovery,
                save a backup of the `TBL_NAME.MYD' file as
                `TBL_NAME-DATETIME.BAK'.
     `FORCE'    Run recovery even if we would lose more than
                one row from the `.MYD' file.
     `QUICK'    Do not check the rows in the table if there
                are not any delete blocks.

     Before the server automatically repairs a table, it writes a note
     about the repair to the error log. If you want to be able to
     recover from most problems without user intervention, you should
     use the options `BACKUP,FORCE'. This forces a repair of a table
     even if some rows would be deleted, but it keeps the old data file
     as a backup so that you can later examine what happened.

     This option was named `--myisam-recover', before MySQL 5.5.3. The
     old option name still works because it is recognized as an
     unambiguous prefix of the new name, `--myisam-recover-options'.
     (Option prefix recognition occurs as described in *Note
     program-options::.)

     The option value `OFF' is available as of MySQL 5.5.3.

     See *Note myisam-start::.

   *  `--old-alter-table'

     Options for old-alter-table

     *Command-Line        `--old-alter-table'        
     Format*                              
     *Option-File Format* `old-alter-table'        
     *System Variable     `old_alter_table'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     When this option is given, the server does not use the optimized
     method of processing an *Note `ALTER TABLE': alter-table.
     operation. It reverts to using a temporary table, copying over the
     data, and then renaming the temporary table to the original, as
     used by MySQL 5.0 and earlier. For more information on the
     operation of *Note `ALTER TABLE': alter-table, see *Note
     alter-table::.

   *  `--old-style-user-limits'

     Options for old-style-user-limits

     *Command-Line        `--old-style-user-limits'        
     Format*                              
     *Option-File Format* `old-style-user-limits'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Enable old-style user limits. (Before MySQL 5.0.3, account
     resource limits were counted separately for each host from which a
     user connected rather than per account row in the `user' table.)
     See *Note user-resources::.

   *  `--one-thread'

     Options for one-thread

     *Command-Line        `--one-thread'        
     Format*                              
     *Option-File Format* `one-thread'        

     Only use one thread (for debugging under Linux). This option is
     available only if the server is built with debugging enabled. See
     *Note porting::.

     This option is deprecated and is removed in MySQL 5.6. Use
     `--thread_handling=no-threads' instead.

   *  `--open-files-limit=COUNT'

     Options for open-files-limit

     *Command-Line        `--open-files-limit=#'        
     Format*                              
     *Option-File Format* `open-files-limit'        
     *System Variable     `open_files_limit'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          65535'          

     Changes the number of file descriptors available to *Note
     `mysqld': mysqld. You should try increasing the value of this
     option if *Note `mysqld': mysqld. gives you the error `Too many
     open files'.  *Note `mysqld': mysqld. uses the option value to
     reserve descriptors with `setrlimit()'. If the requested number of
     file descriptors cannot be allocated, *Note `mysqld': mysqld.
     writes a warning to the error log.

     *Note `mysqld': mysqld. may attempt to allocate more than the
     requested number of descriptors (if they are available), using the
     values of `max_connections' and `table_open_cache' to estimate
     whether more descriptors will be needed.

     On Unix, the value cannot be set less than `ulimit -n'.

   *  `--partition[=VALUE]'

     Options for partition

     *Command-Line        `--partition'        
     Format*                              
     *Option-File Format* `partition'        
     *Disabled by*        `skip-partition'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            

     Enables or disables user-defined partitioning support in the MySQL
     Server.

   *  `--pid-file=PATH'

     Options for pid-file

     *Command-Line        `--pid-file=file_name'        
     Format*                              
     *Option-File Format* `pid-file'        
     *System Variable     `pid_file'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The path name of the process ID file. The server creates the file
     in the data directory unless an absolute path name is given to
     specify a different directory. This file is used by other programs
     such as *Note `mysqld_safe': mysqld-safe. to determine the
     server's process ID.

   *  `--plugin-XXX'

     Specifies an option that pertains to a server plugin. For example,
     many storage engines can be built as plugins, and for such
     engines, options for them can be specified with a `--plugin'
     prefix. Thus, the `--innodb_file_per_table' option for `InnoDB'
     can be specified as `--plugin-innodb_file_per_table'.

     For boolean options that can be enabled or disabled, the `--skip'
     prefix and other alternative formats are supported as well (see
     *Note option-modifiers::). For example,
     `--skip-plugin-innodb_file_per_table' disables
     `innodb_file_per_table'.

     The rationale for the `--plugin' prefix is that it enables plugin
     options to be specified unambiguously if there is a name conflict
     with a built-in server option. For example, were a plugin writer
     to name a plugin `sql' and implement a `mode' option, the option
     name might be `--sql-mode', which would conflict with the built-in
     option of the same name. In such cases, references to the
     conflicting name are resolved in favor of the built-in option. To
     avoid the ambiguity, users can specify the plugin option as
     `--plugin-sql-mode'. Use of the `--plugin' prefix for plugin
     options is recommended to avoid any question of ambiguity.

   *  `--plugin-load=PLUGIN_LIST'

     Options for plugin-load

     *Command-Line        `--plugin-load=plugin_list'        
     Format*                              
     *Option-File Format* `plugin-load'        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     This option tells the server to load the named plugins at startup.
     The option value is a semicolon-separated list of
     `NAME=PLUGIN_LIBRARY' pairs. Each NAME is the name of the plugin,
     and PLUGIN_LIBRARY is the name of the shared library that contains
     the plugin code. Each library file must be located in the
     directory named by the `plugin_dir' system variable.  For example,
     if plugins named `myplug1' and `myplug2' have library files
     `myplug1.so' and `myplug2.so', use this option to load them at
     startup:

          shell> `mysqld --plugin-load="myplug1=myplug1.so;myplug2=myplug2.so"'

     Quotes are used around the argument value here because semicolon
     (`;') is interpreted as a special character by some command
     interpreters. (Unix shells treat it as a command terminator, for
     example.)

     All plugins to load must be named in the same `--plugin-load'
     option. If multiple `--plugin-load' options are given, only the
     last one is used.

     If a plugin library is named without any preceding plugin name,
     the server loads all plugins in the library.

     Each plugin is loaded for a single invocation of *Note `mysqld':
     mysqld. only. After a restart, the plugin is not loaded unless
     `--plugin-load' is used again. This is in contrast to *Note
     `INSTALL PLUGIN': install-plugin, which adds an entry to the
     `mysql.plugins' table to cause the plugin to be loaded for every
     normal server startup.

     Under normal startup, the server determines which plugins to load
     by reading the `mysql.plugins' system table. If the server is
     started with the `--skip-grant-tables' option, it does not consult
     the `mysql.plugins' table and does not load plugins listed there.
     `--plugin-load' enables plugins to be loaded even when
     `--skip-grant-tables' is given.  `--plugin-load' also enables
     plugins to be loaded at startup under configurations when plugins
     cannot be loaded at runtime.

     For additional information about plugin loading, see *Note
     server-plugin-loading::.

   *  `--port=PORT_NUM', `-P PORT_NUM'

     Options for port

     *Command-Line        `--port=#'        
     Format*                              
                          `-P'            
     *Option-File Format* `port'          
     *System Variable     `port'          
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `3306'          
     *Range*              `0 ..           
                          65535'          

     The port number to use when listening for TCP/IP connections.  The
     port number must be 1024 or higher unless the server is started by
     the `root' system user.

   *  `--port-open-timeout=NUM'

     Options for port-open-timeout

     *Command-Line        `--port-open-timeout=#'        
     Format*                              
     *Option-File Format* `port-open-timeout'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             

     On some systems, when the server is stopped, the TCP/IP port might
     not become available immediately. If the server is restarted
     quickly afterward, its attempt to reopen the port can fail. This
     option indicates how many seconds the server should wait for the
     TCP/IP port to become free if it cannot be opened. The default is
     not to wait.

   *  `--remove [SERVICE_NAME]'

     Options for remove

     *Command-Line        `--remove        
     Format*              [service_name]'        

     (Windows only) Remove a MySQL Windows service. The default service
     name is `MySQL' if no SERVICE_NAME value is given. For more
     information, see *Note windows-start-service::.

   *  `--safe-mode'

     Options for safe-mode

     *Deprecated*         5.5.26          
     *Command-Line        `--safe-mode'        
     Format*                              
     *Option-File Format* `safe-mode'        

     Skip some optimization stages. This option is deprecated and is
     removed in MySQL 5.6.

   *  `--safe-show-database'

     Options for safe-show-database

     *Deprecated*         4.0.2           
     *Removed*            5.5.3           
     *Command-Line        `--safe-show-database'        
     Format*                              
     *Option-File Format* `safe-show-database'        
     *System Variable     `safe_show_database'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        

     This option is deprecated and does not do anything because there
     is a *Note `SHOW DATABASES': show-databases.  privilege that can
     be used to control access to database names on a per-account
     basis. See *Note privileges-provided::.  `--safe-show-database' was
     removed in MySQL 5.5.3.

   *  `--safe-user-create'

     Options for safe-user-create

     *Command-Line        `--safe-user-create'        
     Format*                              
     *Option-File Format* `safe-user-create'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     If this option is enabled, a user cannot create new MySQL users by
     using the *Note `GRANT': grant.  statement unless the user has the
     `INSERT' privilege for the `mysql.user' table or any column in the
     table. If you want a user to have the ability to create new users
     that have those privileges that the user has the right to grant,
     you should grant the user the following privilege:

          GRANT INSERT(user) ON mysql.user TO 'USER_NAME'@'HOST_NAME';

     This ensures that the user cannot change any privilege columns
     directly, but has to use the *Note `GRANT': grant. statement to
     give privileges to other users.

   *  `--secure-auth'

     Options for secure-auth

     *Command-Line        `--secure-auth'        
     Format*                              
     *Option-File Format* `secure-auth'        
     *System Variable     `secure_auth'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     This option causes the server to block connections by clients that
     attempt to use accounts that have passwords stored in the old
     (pre-4.1) format. Use it to prevent all use of passwords employing
     the old format (and hence insecure communication over the network).

     Server startup fails with an error if this option is enabled and
     the privilege tables are in pre-4.1 format. See *Note old-client::.

     The *Note `mysql': mysql. client also has a `--secure-auth'
     option, which prevents connections to a server if the server
     requires a password in old format for the client account.

     *Note*:

     Passwords that use the pre-4.1 hashing method are less secure than
     passwords that use the native password hashing method and should
     be avoided.

   *  `--secure-file-priv=PATH'

     Options for secure-file-priv

     *Command-Line        `--secure-file-priv=path'        
     Format*                              
     *Option-File Format* `secure-file-priv'        
     *System Variable     `secure_file_priv'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        

     This option limits the effect of the `LOAD_FILE()' function and the
     *Note `LOAD DATA': load-data. and *Note `SELECT ... INTO OUTFILE':
     select-into. statements to work only with files in the specified
     directory.

   *  `--shared-memory'

     Options for shared_memory

     *System Variable     `shared_memory'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
     *Platform Specific*  windows         

     Enable shared-memory connections by local clients. This option is
     available only on Windows.

   *  `--shared-memory-base-name=NAME'

     Options for shared_memory_base_name

     *System Variable     `shared_memory_base_name'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
     *Platform Specific*  windows         

     The name of shared memory to use for shared-memory connections.
     This option is available only on Windows. The default name is
     `MYSQL'. The name is case sensitive.

   *  `--skip-concurrent-insert'

     Turn off the ability to select and insert at the same time on
     `MyISAM' tables. (This is to be used only if you think you have
     found a bug in this feature.) See *Note concurrent-inserts::.

   *  `--skip-event-scheduler'

     Options for skip-event-scheduler

     *Command-Line        `--skip-event-scheduler'        
     Format*                              
                          `--disable-event-scheduler'        
     *Option-File Format* `skip-event-scheduler'        

     Turns the Event Scheduler `OFF'. This is not the same as disabling
     the Event Scheduler, which requires setting
     `--event-scheduler=DISABLED'; see The `--event-scheduler' Option,
     for more information.

   *  `--skip-grant-tables'

     This option causes the server to start without using the privilege
     system at all, which gives anyone with access to the server
     _unrestricted access to all databases_. You can cause a running
     server to start using the grant tables again by executing *Note
     `mysqladmin flush-privileges': mysqladmin. or *Note `mysqladmin
     reload': mysqladmin. command from a system shell, or by issuing a
     MySQL *Note `FLUSH PRIVILEGES': flush. statement after connecting
     to the server.  This option also suppresses loading of plugins
     that were installed with the *Note `INSTALL PLUGIN':
     install-plugin. statement, user-defined functions (UDFs), and
     scheduled events. To cause plugins to be loaded anyway, use the
     `--plugin-load' option.

     Note that *Note `FLUSH PRIVILEGES': flush. might be executed
     implicitly by other actions performed after startup. For example,
     *Note `mysql_upgrade': mysql-upgrade. flushes the privileges during
     the upgrade procedure.

   *  `--skip-host-cache'

     Disable use of the internal host cache for faster name-to-IP
     resolution. In this case, the server performs a DNS lookup every
     time a client connects. See *Note host-cache::.

   * `--skip-innodb'

     Disable the `InnoDB' storage engine. In this case, if the default
     storage engine is *Note `InnoDB': innodb-storage-engine, the
     server will not start unless you also use
     `--default-storage-engine' to set the default to some other engine.

   *  `--skip-name-resolve'

     Do not resolve host names when checking client connections.  Use
     only IP addresses. If you use this option, all `Host' column
     values in the grant tables must be IP addresses or `localhost'. See
     *Note host-cache::.

   *  `--skip-networking'

     Do not listen for TCP/IP connections at all. All interaction with
     *Note `mysqld': mysqld. must be made using named pipes or shared
     memory (on Windows) or Unix socket files (on Unix).  This option
     is highly recommended for systems where only local clients are
     permitted. See *Note host-cache::.

   *  `--skip-partition'

     Options for skip-partition

     *Command-Line        `--skip-partition'        
     Format*                              
                          `--disable-partition'        
     *Option-File Format* `skip-partition'        

     Disables user-defined partitioning. Partitioned tables can be seen
     using *Note `SHOW TABLES': show-tables. or by querying the *Note
     `INFORMATION_SCHEMA.TABLES': tables-table. table, but cannot be
     created or modified, nor can data in such tables be accessed. All
     partition-specific columns in the *Note
     `INFORMATION_SCHEMA.PARTITIONS': partitions-table.  table display
     `NULL'.

     Since *Note `DROP TABLE': drop-table. removes table definition
     (`.frm') files, this statement works on partitioned tables even
     when partitioning is disabled using the option. The statement,
     however, does not remove `.par' files associated with partitioned
     tables in such cases. For this reason, you should avoid dropping
     partitioned tables with partitioning disabled, or take action to
     remove the orphaned `.par' files manually.

   *  `--ssl*'

     Options that begin with `--ssl' specify whether to permit clients
     to connect using SSL and indicate where to find SSL keys and
     certificates. See *Note ssl-options::.

   *  `--standalone'

     Options for standalone

     *Command-Line        `--standalone'        
     Format*                              
     *Option-File Format* `standalone'        
     *Platform Specific*  windows         

     Available on Windows only; instructs the MySQL server not to run
     as a service.

   *  `--super-large-pages'

     Options for super-large-pages

     *Introduced*         5.5.3           
     *Command-Line        `--super-large-pages'        
     Format*                              
     *Option-File Format* `super-large-pages'        
     *Platform Specific*  solaris         
                          *Permitted        
                          Values*         
     *Type* (solaris)     `boolean'        
     *Default*            `FALSE'         

     Standard use of large pages in MySQL attempts to use the largest
     size supported, up to 4MB. Under Solaris, a `super large pages'
     feature enables uses of pages up to 256MB. This feature is
     available for recent SPARC platforms. It can be enabled or
     disabled by using the `--super-large-pages' or
     `--skip-super-large-pages' option.

   *  `--symbolic-links', `--skip-symbolic-links'

     Options for symbolic-links

     *Command-Line        `--symbolic-links'        
     Format*                              
     *Option-File Format* `symbolic-links'        

     Enable or disable symbolic link support. This option has different
     effects on Windows and Unix:

        * On Windows, enabling symbolic links enables you to establish
          a symbolic link to a database directory by creating a
          `DB_NAME.sym' file that contains the path to the real
          directory. See *Note windows-symbolic-links::.

        * On Unix, enabling symbolic links means that you can link a
          `MyISAM' index file or data file to another directory with
          the `INDEX DIRECTORY' or `DATA DIRECTORY' options of the
          *Note `CREATE TABLE': create-table.  statement. If you delete
          or rename the table, the files that its symbolic links point
          to also are deleted or renamed. See *Note
          symbolic-links-to-tables::.

   *  `--skip-safemalloc'

     Options for skip-safemalloc

     *Removed*            5.5.6           
     *Command-Line        `--skip-safemalloc'        
     Format*                              
     *Option-File Format* `skip-safemalloc'        

     Previously, if MySQL was configured with full debugging support,
     all MySQL programs check for memory overruns during each memory
     allocation and memory freeing operation. This checking is very
     slow, so for the server you can avoid it when you do not need it
     by using the `--skip-safemalloc' option.

     `safemalloc', along with this option, was removed in MySQL 5.5.6.

   *  `--skip-show-database'

     Options for skip-show-database

     *Command-Line        `--skip-show-database'        
     Format*                              
     *Option-File Format* `skip-show-database'        
     *System Variable     `skip_show_database'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              

     This option sets the `skip_show_database' system variable that
     controls who is permitted to use the *Note `SHOW DATABASES':
     show-databases. statement. See *Note server-system-variables::.

   *  `--skip-stack-trace'

     Options for skip-stack-trace

     *Command-Line        `--skip-stack-trace'        
     Format*                              
     *Option-File Format* `skip-stack-trace'        

     Do not write stack traces. This option is useful when you are
     running *Note `mysqld': mysqld. under a debugger. On some systems,
     you also must use this option to get a core file. See *Note
     porting::.

   *  `--skip-thread-priority'

     Options for skip-thread-priority

     *Deprecated*         5.1.29          
     *Command-Line        `--skip-thread-priority'        
     Format*                              
     *Option-File Format* `skip-thread-priority'        

     Disable using thread priorities for faster response time. This
     option is deprecated and is removed in MySQL 5.6.

   *  `--slow-query-log[={0|1}]'

     Options for slow-query-log

     *Command-Line        `--slow-query-log'        
     Format*                              
     *Option-File Format* `slow-query-log'        
     *System Variable     `slow_query_log'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Specify the initial slow query log state. With no argument or an
     argument of 1, the `--slow-query-log' option enables the log. If
     omitted or given with an argument of 0, the option disables the
     log.

   *  `--slow-start-timeout=TIMEOUT'

     Options for slow-start-timeout

     *Introduced*         5.5.20          
     *Command-Line        `--slow-start-timeout=#'        
     Format*                              
     *Option-File Format* `slow-start-timeout'        
                          *Permitted        
                          Values*         
     *Type* (windows)     `numeric'        
     *Default*            `15000'         

     This option controls the Windows service control manager's service
     start timeout. The value is the maximum number of milliseconds
     that the service control manager waits before trying to kill the
     windows service during startup. The default value is 15000 (15
     seconds). If the MySQL service takes too long to start, you may
     need to increase this value. A value of 0 means there is no
     timeout.

   *  `--socket=PATH'

     Options for socket

     *Command-Line        `--socket=name'        
     Format*                              
     *Option-File Format* `socket'        
     *System Variable     `socket'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           
     *Default*            `/tmp/mysql.sock'        

     On Unix, this option specifies the Unix socket file to use when
     listening for local connections. The default value is
     `/tmp/mysql.sock'. If this option is given, the server creates the
     file in the data directory unless an absolute path name is given
     to specify a different directory.  On Windows, the option
     specifies the pipe name to use when listening for local
     connections that use a named pipe. The default value is `MySQL'
     (not case sensitive).

   *  `--sql-mode=VALUE[,VALUE[,VALUE...]]'

     Options for sql-mode

     *Command-Line        `--sql-mode=name'        
     Format*                              
     *Option-File Format* `sql-mode'        
     *System Variable     `sql_mode'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `set'           
     *Default*            `'''            
     *Valid Values*       `ALLOW_INVALID_DATES'        
     `ANSI_QUOTES'                        
     `ERROR_FOR_DIVISION_BY_ZERO'                
     `HIGH_NOT_PRECEDENCE'                
     `IGNORE_SPACE'                       
     `NO_AUTO_CREATE_USER'                
     `NO_AUTO_VALUE_ON_ZERO'                
     `NO_BACKSLASH_ESCAPES'                
     `NO_DIR_IN_CREATE'                   
     `NO_ENGINE_SUBSTITUTION'                
     `NO_FIELD_OPTIONS'                   
     `NO_KEY_OPTIONS'                     
     `NO_TABLE_OPTIONS'                   
     `NO_UNSIGNED_SUBTRACTION'                
     `NO_ZERO_DATE'                       
     `NO_ZERO_IN_DATE'                    
     `ONLY_FULL_GROUP_BY'                 
     `PAD_CHAR_TO_FULL_LENGTH'                
     `PIPES_AS_CONCAT'                    
     `REAL_AS_FLOAT'                      
     `STRICT_ALL_TABLES'                  
     `STRICT_TRANS_TABLES'                

     Set the SQL mode. See *Note server-sql-mode::.

     *Note*:

     MySQL installation programs may configure the SQL mode during the
     installation process. If the SQL mode differs from the default or
     from what you expect, check for a setting in an option file that
     the server reads at startup.

   *  `--sysdate-is-now'

     Options for sysdate-is-now

     *Command-Line        `--sysdate-is-now'        
     Format*                              
     *Option-File Format* `sysdate-is-now'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     `SYSDATE()' by default returns the time at which it executes, not
     the time at which the statement in which it occurs begins
     executing. This differs from the behavior of `NOW()'.  This option
     causes `SYSDATE()' to be an alias for `NOW()'. For information
     about the implications for binary logging and replication, see the
     description for `SYSDATE()' in *Note date-and-time-functions:: and
     for `SET TIMESTAMP' in *Note server-system-variables::.

   *  `--tc-heuristic-recover={COMMIT|ROLLBACK}'

     Options for tc-heuristic-recover

     *Command-Line        `--tc-heuristic-recover=name'        
     Format*                              
     *Option-File Format* `tc-heuristic-recover'        
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Valid Values*       `COMMIT'        
     `RECOVER'                            

     The type of decision to use in the heuristic recovery process.
     Currently, this option is unused.

   *  `--temp-pool'

     Options for temp-pool

     *Command-Line        `--temp-pool'        
     Format*                              
     *Option-File Format* `temp-pool'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `TRUE'          

     This option causes most temporary files created by the server to
     use a small set of names, rather than a unique name for each new
     file. This works around a problem in the Linux kernel dealing with
     creating many new files with different names.  With the old
     behavior, Linux seems to `leak' memory, because it is being
     allocated to the directory entry cache rather than to the disk
     cache. This option is ignored except on Linux.

   *  `--transaction-isolation=LEVEL'

     Options for transaction-isolation

     *Command-Line        `--transaction-isolation=name'        
     Format*                              
     *Option-File Format* `transaction-isolation'        
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Valid Values*       `READ-UNCOMMITTED'        
     `READ-COMMITTED'                     
     `REPEATABLE-READ'                    
     `SERIALIZABLE'                       

     Sets the default transaction isolation level. The `level' value
     can be `READ-UNCOMMITTED', `READ-COMMITTED', `REPEATABLE-READ', or
     `SERIALIZABLE'. See *Note set-transaction::.

     The default transaction isolation level can also be set at runtime
     using the *Note `SET TRANSACTION': set-transaction. statement or
     by setting the `tx_isolation' system variable.

   *  `--tmpdir=PATH', `-t PATH'

     Options for tmpdir

     *Command-Line        `--tmpdir=path'        
     Format*                              
                          `-t'            
     *Option-File Format* `tmpdir'        
     *System Variable     `tmpdir'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The path of the directory to use for creating temporary files.  It
     might be useful if your default `/tmp' directory resides on a
     partition that is too small to hold temporary tables. This option
     accepts several paths that are used in round-robin fashion. Paths
     should be separated by colon characters (``:'') on Unix and
     semicolon characters (``;'') on Windows. If the MySQL server is
     acting as a replication slave, you should not set `--tmpdir' to
     point to a directory on a memory-based file system or to a
     directory that is cleared when the server host restarts. For more
     information about the storage location of temporary files, see
     *Note temporary-files::. A replication slave needs some of its
     temporary files to survive a machine restart so that it can
     replicate temporary tables or *Note `LOAD DATA INFILE': load-data.
     operations. If files in the temporary file directory are lost when
     the server restarts, replication fails.

   *  `--user={USER_NAME|USER_ID}', `-u {USER_NAME|USER_ID}'

     Options for user

     *Command-Line        `--user=name'        
     Format*                              
                          `-u             
                          name'           
     *Option-File Format* `user'          
                          *Permitted        
                          Values*         
     *Type*               `string'        

     Run the *Note `mysqld': mysqld. server as the user having the name
     USER_NAME or the numeric user ID USER_ID.  (`User' in this context
     refers to a system login account, not a MySQL user listed in the
     grant tables.)

     This option is _mandatory_ when starting *Note `mysqld': mysqld.
     as `root'. The server changes its user ID during its startup
     sequence, causing it to run as that particular user rather than as
     `root'. See *Note security-guidelines::.

     To avoid a possible security hole where a user adds a
     `--user=root' option to a `my.cnf' file (thus causing the server to
     run as `root'), *Note `mysqld': mysqld.  uses only the first
     `--user' option specified and produces a warning if there are
     multiple `--user' options. Options in `/etc/my.cnf' and
     `$MYSQL_HOME/my.cnf' are processed before command-line options, so
     it is recommended that you put a `--user' option in `/etc/my.cnf'
     and specify a value other than `root'. The option in `/etc/my.cnf'
     is found before any other `--user' options, which ensures that the
     server runs as a user other than `root', and that a warning
     results if any other `--user' option is found.

   *  `--verbose', `-v'

     Use this option with the `--help' option for detailed help.

   *  `--version', `-V'

     Display version information and exit.

You can assign a value to a server system variable by using an option
of the form `--VAR_NAME=VALUE'.  For example, `--key_buffer_size=32M'
sets the `key_buffer_size' variable to a value of 32MB.

Note that when you assign a value to a variable, MySQL might
automatically correct the value to stay within a given range, or adjust
the value to the closest permissible value if only certain values are
permitted.

If you want to restrict the maximum value to which a variable can be
set at runtime with *Note `SET': set-statement, you can define this by
using the `--maximum-VAR_NAME=VALUE' command-line option.

You can change the values of most system variables for a running server
with the *Note `SET': set-statement.  statement. See *Note
set-statement::.

*Note server-system-variables::, provides a full description for all
variables, and additional information for setting them at server
startup and runtime.  *Note server-parameters::, includes information on
optimizing the server by tuning system variables.


File: manual.info,  Node: server-system-variables,  Next: using-system-variables,  Prev: server-options,  Up: mysqld-server

5.1.4 Server System Variables
-----------------------------

The MySQL server maintains many system variables that indicate how it
is configured. Each system variable has a default value. System
variables can be set at server startup using options on the command
line or in an option file. Most of them can be changed dynamically
while the server is running by means of the *Note `SET': set-statement.
statement, which enables you to modify operation of the server without
having to stop and restart it. You can refer to system variable values
in expressions.

There are several ways to see the names and values of system variables:

   * To see the values that a server will use based on its compiled-in
     defaults and any option files that it reads, use this command:

          mysqld --verbose --help

   * To see the values that a server will use based on its compiled-in
     defaults, ignoring the settings in any option files, use this
     command:

          mysqld --no-defaults --verbose --help

   * To see the current values used by a running server, use the *Note
     `SHOW VARIABLES': show-variables. statement.

This section provides a description of each system variable.  Variables
with no version indicated are present in all MySQL 5.5 releases. For
historical information concerning their implementation, please see
`http://dev.mysql.com/doc/refman/5.0/en/', and
`http://dev.mysql.com/doc/refman/4.1/en/'.

The following table lists all available system variables.

*System Variable Summary*

Name           Cmd-Line    Option file System Var  Var Scope   Dynamic
audit_log_buffer_size                        Yes         Global      No
audit_log_file                         Yes         Global      No
audit_log_flush                        Yes         Global      Yes
audit_log_policy                        Yes         Global      Yes
audit_log_rotate_on_size                        Yes         Global      Yes
audit_log_strategy                        Yes         Global      No
auto_increment_increment                        Yes         Both        Yes
auto_increment_offset                        Yes         Both        Yes
autocommit     Yes         Yes         Yes         Both        Yes
automatic_sp_privileges                        Yes         Global      Yes
back_log                               Yes         Global      No
basedir        Yes         Yes         Yes         Global      No
big-tables     Yes         Yes                                 Yes
- _Variable_:                          Yes         Both        Yes
big_tables                                                     
bind-address   Yes         Yes         Yes         Global      No
binlog_cache_sizeYes         Yes         Yes         Global      Yes
binlog_direct_non_transactional_updatesYes         Yes         Yes         Both        Yes
binlog-format  Yes         Yes                                 Yes
- _Variable_:                          Yes         Both        Yes
binlog_format                                                  
binlog_stmt_cache_sizeYes         Yes         Yes         Global      Yes
bulk_insert_buffer_sizeYes         Yes         Yes         Both        Yes
character_set_client                        Yes         Both        Yes
character_set_connection                        Yes         Both        Yes
character_set_database                        Yes         Both        Yes
This option                                                    
is dynamic,                                                    
but only the                                                   
server should                                                  
set this                                                       
information.                                                   
You should                                                     
not set the                                                    
value of this                                                  
variable                                                       
manually.                                                      
character-set-filesystemYes         Yes                                 Yes
- _Variable_:                          Yes         Both        Yes
character_set_filesystem                                                
character_set_results                        Yes         Both        Yes
character-set-serverYes         Yes                                 Yes
- _Variable_:                          Yes         Both        Yes
character_set_server                                                
character_set_system                        Yes         Global      No
character-sets-dirYes         Yes                                 No
- _Variable_:                          Yes         Global      No
character_sets_dir                                                
collation_connection                        Yes         Both        Yes
collation_database                        Yes         Both        Yes
This option                                                    
is dynamic,                                                    
but only the                                                   
server should                                                  
set this                                                       
information.                                                   
You should                                                     
not set the                                                    
value of this                                                  
variable                                                       
manually.                                                      
collation-serverYes         Yes                                 Yes
- _Variable_:                          Yes         Both        Yes
collation_server                                                
completion_typeYes         Yes         Yes         Both        Yes
concurrent_insertYes         Yes         Yes         Global      Yes
connect_timeoutYes         Yes         Yes         Global      Yes
datadir        Yes         Yes         Yes         Global      No
date_format                            Yes         Global      No
datetime_format                        Yes         Global      No
debug          Yes         Yes         Yes         Both        Yes
debug_sync                             Yes         Session     Yes
default-storage-engineYes         Yes                                 Yes
- _Variable_:                          Yes         Both        Yes
default_storage_engine                                                
default_week_formatYes         Yes         Yes         Both        Yes
delay-key-writeYes         Yes                                 Yes
- _Variable_:                          Yes         Global      Yes
delay_key_write                                                
delayed_insert_limitYes         Yes         Yes         Global      Yes
delayed_insert_timeoutYes         Yes         Yes         Global      Yes
delayed_queue_sizeYes         Yes         Yes         Global      Yes
div_precision_incrementYes         Yes         Yes         Both        Yes
engine-condition-pushdownYes         Yes                                 Yes
- _Variable_:                          Yes         Both        Yes
engine_condition_pushdown                                                
error_count                            Yes         Session     No
event-schedulerYes         Yes                                 Yes
- _Variable_:                          Yes         Global      Yes
event_scheduler                                                
expire_logs_daysYes         Yes         Yes         Global      Yes
external_user                          Yes         Session     No
flush          Yes         Yes         Yes         Global      Yes
flush_time     Yes         Yes         Yes         Global      Yes
foreign_key_checks                        Yes         Both        Yes
ft_boolean_syntaxYes         Yes         Yes         Global      Yes
ft_max_word_lenYes         Yes         Yes         Global      No
ft_min_word_lenYes         Yes         Yes         Global      No
ft_query_expansion_limitYes         Yes         Yes         Global      No
ft_stopword_fileYes         Yes         Yes         Global      No
general-log    Yes         Yes                                 Yes
- _Variable_:                          Yes         Global      Yes
general_log                                                    
general_log_fileYes         Yes         Yes         Global      Yes
group_concat_max_lenYes         Yes         Yes         Both        Yes
have_compress                          Yes         Global      No
have_crypt                             Yes         Global      No
have_csv                               Yes         Global      No
have_dynamic_loading                        Yes         Global      No
have_geometry                          Yes         Global      No
have_innodb                            Yes         Global      No
have_ndbcluster                        Yes         Global      No
have_openssl                           Yes         Global      No
have_partitioning                        Yes         Global      No
have_profiling                         Yes         Global      No
have_query_cache                        Yes         Global      No
have_rtree_keys                        Yes         Global      No
have_ssl                               Yes         Global      No
have_symlink                           Yes         Global      No
hostname                               Yes         Global      No
identity                               Yes         Session     Yes
ignore-builtin-innodbYes         Yes                                 No
- _Variable_:                          Yes         Global      No
ignore_builtin_innodb                                                
init_connect   Yes         Yes         Yes         Global      Yes
init-file      Yes         Yes                                 No
- _Variable_:                          Yes         Global      No
init_file                                                      
init_slave     Yes         Yes         Yes         Global      Yes
innodb_adaptive_flushingYes         Yes         Yes         Global      Yes
innodb_adaptive_hash_indexYes         Yes         Yes         Global      Yes
innodb_additional_mem_pool_sizeYes         Yes         Yes         Global      No
innodb_autoextend_incrementYes         Yes         Yes         Global      Yes
innodb_autoinc_lock_modeYes         Yes         Yes         Global      No
innodb_buffer_pool_instancesYes         Yes         Yes         Global      No
innodb_buffer_pool_sizeYes         Yes         Yes         Global      No
innodb_change_bufferingYes         Yes         Yes         Global      Yes
innodb_checksumsYes         Yes         Yes         Global      No
innodb_commit_concurrencyYes         Yes         Yes         Global      Yes
innodb_concurrency_ticketsYes         Yes         Yes         Global      Yes
innodb_data_file_pathYes         Yes         Yes         Global      No
innodb_data_home_dirYes         Yes         Yes         Global      No
innodb_doublewriteYes         Yes         Yes         Global      No
innodb_fast_shutdownYes         Yes         Yes         Global      Yes
innodb_file_formatYes         Yes         Yes         Global      Yes
innodb_file_format_checkYes         Yes         Yes         Global      No
innodb_file_format_maxYes         Yes         Yes         Global      Yes
innodb_file_per_tableYes         Yes         Yes         Global      Yes
innodb_flush_log_at_trx_commitYes         Yes         Yes         Global      Yes
innodb_flush_methodYes         Yes         Yes         Global      No
innodb_force_load_corruptedYes         Yes         Yes         Global      No
innodb_force_recoveryYes         Yes         Yes         Global      No
innodb_io_capacityYes         Yes         Yes         Global      Yes
innodb_large_prefixYes         Yes         Yes         Global      Yes
innodb_lock_wait_timeoutYes         Yes         Yes         Both        Yes
innodb_locks_unsafe_for_binlogYes         Yes         Yes         Global      No
innodb_log_buffer_sizeYes         Yes         Yes         Global      No
innodb_log_file_sizeYes         Yes         Yes         Global      No
innodb_log_files_in_groupYes         Yes         Yes         Global      No
innodb_log_group_home_dirYes         Yes         Yes         Global      No
innodb_max_dirty_pages_pctYes         Yes         Yes         Global      Yes
innodb_max_purge_lagYes         Yes         Yes         Global      Yes
innodb_mirrored_log_groupsYes         Yes         Yes         Global      No
innodb_old_blocks_pctYes         Yes         Yes         Global      Yes
innodb_old_blocks_timeYes         Yes         Yes         Global      Yes
innodb_open_filesYes         Yes         Yes         Global      No
innodb_print_all_deadlocksYes         Yes         Yes         Global      Yes
innodb_purge_batch_sizeYes         Yes         Yes         Global      Yes
innodb_purge_threadsYes         Yes         Yes         Global      No
innodb_random_read_aheadYes         Yes         Yes         Global      Yes
innodb_read_ahead_thresholdYes         Yes         Yes         Global      Yes
innodb_read_io_threadsYes         Yes         Yes         Global      No
innodb_replication_delayYes         Yes         Yes         Global      Yes
innodb_rollback_on_timeoutYes         Yes         Yes         Global      No
innodb_rollback_segmentsYes         Yes         Yes         Global      Yes
innodb_spin_wait_delayYes         Yes         Yes         Global      Yes
innodb_stats_methodYes         Yes         Yes         Global      Yes
innodb_stats_on_metadataYes         Yes         Yes         Global      Yes
innodb_stats_sample_pagesYes         Yes         Yes         Global      Yes
innodb_strict_modeYes         Yes         Yes         Both        Yes
innodb_support_xaYes         Yes         Yes         Both        Yes
innodb_sync_spin_loopsYes         Yes         Yes         Global      Yes
innodb_table_locksYes         Yes         Yes         Both        Yes
innodb_thread_concurrencyYes         Yes         Yes         Global      Yes
innodb_thread_sleep_delayYes         Yes         Yes         Global      Yes
innodb_use_native_aioYes         Yes         Yes         Global      No
innodb_use_sys_mallocYes         Yes         Yes         Global      No
innodb_version                         Yes         Global      No
innodb_write_io_threadsYes         Yes         Yes         Global      No
insert_id                              Yes         Session     Yes
interactive_timeoutYes         Yes         Yes         Both        Yes
join_buffer_sizeYes         Yes         Yes         Both        Yes
keep_files_on_createYes         Yes         Yes         Both        Yes
key_buffer_sizeYes         Yes         Yes         Global      Yes
key_cache_age_thresholdYes         Yes         Yes         Global      Yes
key_cache_block_sizeYes         Yes         Yes         Global      Yes
key_cache_division_limitYes         Yes         Yes         Global      Yes
language       Yes         Yes         Yes         Global      No
large_files_support                        Yes         Global      No
large_page_size                        Yes         Global      No
large-pages    Yes         Yes                                 No
- _Variable_:                          Yes         Global      No
large_pages                                                    
last_insert_id                         Yes         Session     Yes
lc-messages    Yes         Yes                                 Yes
- _Variable_:                          Yes         Both        Yes
lc_messages                                                    
lc-messages-dirYes         Yes                                 No
- _Variable_:                          Yes         Global      No
lc_messages_dir                                                
lc_time_names                          Yes         Both        Yes
license                                Yes         Global      No
local_infile                           Yes         Global      Yes
lock_wait_timeoutYes         Yes         Yes         Both        Yes
locked_in_memory                        Yes         Global      No
log            Yes         Yes         Yes         Global      Yes
log_bin                                Yes         Global      No
log-bin        Yes         Yes         Yes         Global      No
log-bin-trust-function-creatorsYes         Yes                                 Yes
- _Variable_:                          Yes         Global      Yes
log_bin_trust_function_creators                                                
log-bin-trust-routine-creatorsYes         Yes                                 Yes
- _Variable_:                          Yes         Global      Yes
log_bin_trust_routine_creators                                                
(http://dev.mysql.com/doc/refman/5.0/en/server-system-variables.html#sysvar_log_bin_trust_routine_creators)                                                
log_bin_use_v1_row_eventsYes         Yes         Yes         Global      No
log-bin-use-v1-row-eventsYes         Yes                                 No
- _Variable_:                          Yes         Global      No
log_bin_use_v1_row_events                                                
log-error      Yes         Yes                                 No
- _Variable_:                          Yes         Global      No
log_error                                                      
log-output     Yes         Yes                                 Yes
- _Variable_:                          Yes         Global      Yes
log_output                                                     
log-queries-not-using-indexesYes         Yes                                 Yes
- _Variable_:                          Yes         Global      Yes
log_queries_not_using_indexes                                                
log-slave-updatesYes         Yes                                 No
- _Variable_:                          Yes         Global      No
log_slave_updates                                                
log_slave_updatesYes         Yes         Yes         Global      No
log-slow-queriesYes         Yes                                 Yes
- _Variable_:                          Yes         Global      Yes
log_slow_queries                                                
log-warnings   Yes         Yes                                 Yes
- _Variable_:                          Yes         Both        Yes
log_warnings                                                   
long_query_timeYes         Yes         Yes         Both        Yes
low-priority-updatesYes         Yes                                 Yes
- _Variable_:                          Yes         Both        Yes
low_priority_updates                                                
lower_case_file_system                        Yes         Global      No
lower_case_table_namesYes         Yes         Yes         Global      No
max_allowed_packetYes         Yes         Yes         Global      Yes
max_binlog_cache_sizeYes         Yes         Yes         Global      Yes
max_binlog_sizeYes         Yes         Yes         Global      Yes
max_binlog_stmt_cache_sizeYes         Yes         Yes         Global      Yes
max_connect_errorsYes         Yes         Yes         Global      Yes
max_connectionsYes         Yes         Yes         Global      Yes
max_delayed_threadsYes         Yes         Yes         Both        Yes
max_error_countYes         Yes         Yes         Both        Yes
max_heap_table_sizeYes         Yes         Yes         Both        Yes
max_insert_delayed_threads                        Yes         Both        Yes
max_join_size  Yes         Yes         Yes         Both        Yes
max_length_for_sort_dataYes         Yes         Yes         Both        Yes
max_long_data_sizeYes         Yes         Yes         Global      No
max_prepared_stmt_countYes         Yes         Yes         Global      Yes
max_relay_log_sizeYes         Yes         Yes         Global      Yes
max_seeks_for_keyYes         Yes         Yes         Both        Yes
max_sort_lengthYes         Yes         Yes         Both        Yes
max_sp_recursion_depthYes         Yes         Yes         Both        Yes
max_user_connectionsYes         Yes         Yes         Both        Yes
max_write_lock_countYes         Yes         Yes         Global      Yes
memlock        Yes         Yes         Yes         Global      No
metadata_locks_cache_size                        Yes         Global      No
min-examined-row-limitYes         Yes         Yes         Both        Yes
myisam_data_pointer_sizeYes         Yes         Yes         Global      Yes
myisam_max_sort_file_sizeYes         Yes         Yes         Global      Yes
myisam_mmap_sizeYes         Yes         Yes         Global      No
myisam_recover_options                        Yes         Global      No
myisam_repair_threadsYes         Yes         Yes         Both        Yes
myisam_sort_buffer_sizeYes         Yes         Yes         Both        Yes
myisam_stats_methodYes         Yes         Yes         Both        Yes
myisam_use_mmapYes         Yes         Yes         Global      Yes
named_pipe                             Yes         Global      No
ndb_autoincrement_prefetch_szYes         Yes         Yes         Both        Yes
ndb-batch-size Yes         Yes         Yes         Global      No
ndb-blob-read-batch-bytesYes         Yes         Yes         Both        Yes
ndb-blob-write-batch-bytesYes         Yes         Yes         Both        Yes
ndb_cache_check_timeYes         Yes         Yes         Global      Yes
ndb-cluster-connection-poolYes         Yes         Yes         Global      No
ndb-deferred-constraintsYes         Yes                                 Yes
- _Variable_:                          Yes         Both        Yes
ndb_deferred_constraints                                                
ndb_deferred_constraintsYes         Yes         Yes         Both        Yes
ndb_distributionYes         Yes         Yes         Both        Yes
ndb-distributionYes         Yes                                 Yes
- _Variable_:                          Yes         Both        Yes
ndb_distribution                                                
ndb_extra_loggingYes         Yes         Yes         Global      Yes
ndb_force_send Yes         Yes         Yes         Both        Yes
ndb_join_pushdown                        Yes         Global      No
ndb-log-apply-statusYes         Yes                                 No
- _Variable_:                          Yes         Global      No
ndb_log_apply_status                                                
ndb_log_bin    Yes                     Yes         Both        Yes
ndb_log_binlog_indexYes                     Yes         Global      Yes
ndb_log_empty_epochsYes         Yes         Yes         Global      Yes
ndb-log-empty-epochsYes         Yes         Yes         Global      Yes
ndb-log-orig   Yes         Yes                                 No
- _Variable_:                          Yes         Global      No
ndb_log_orig                                                   
ndb-log-transaction-idYes         Yes                                 No
- _Variable_:                          Yes         Global      No
ndb_log_transaction_id                                                
ndb_log_transaction_id                        Yes         Global      No
ndb-log-update-as-writeYes         Yes         Yes         Global      Yes
ndb_log_updated_onlyYes         Yes         Yes         Global      Yes
ndb_optimization_delay                        Yes         Global      Yes
ndb_table_no_logging                        Yes         Session     Yes
ndb_table_temporary                        Yes         Session     Yes
ndb_use_copying_alter_table                        Yes         Both        No
ndb_use_exact_count                        Yes         Both        Yes
ndb_use_transactionsYes         Yes         Yes         Both        Yes
ndb-wait-connectedYes         Yes         Yes         Global      No
ndb-wait-setup Yes         Yes         Yes         Global      No
ndbinfo_database                        Yes         Global      No
ndbinfo_max_bytesYes                     Yes         Both        Yes
ndbinfo_max_rowsYes                     Yes         Both        Yes
ndbinfo_show_hiddenYes                     Yes         Both        Yes
ndbinfo_table_prefixYes                     Yes         Both        Yes
ndbinfo_version                        Yes         Global      No
net_buffer_lengthYes         Yes         Yes         Both        Yes
net_read_timeoutYes         Yes         Yes         Both        Yes
net_retry_countYes         Yes         Yes         Both        Yes
net_write_timeoutYes         Yes         Yes         Both        Yes
new            Yes         Yes         Yes         Both        Yes
old            Yes         Yes         Yes         Global      No
old-alter-tableYes         Yes                                 Yes
- _Variable_:                          Yes         Both        Yes
old_alter_table                                                
old_passwords                          Yes         Both        Yes
open-files-limitYes         Yes                                 No
- _Variable_:                          Yes         Global      No
open_files_limit                                                
optimizer_prune_levelYes         Yes         Yes         Both        Yes
optimizer_search_depthYes         Yes         Yes         Both        Yes
optimizer_switchYes         Yes         Yes         Both        Yes
performance_schemaYes         Yes         Yes         Global      No
performance_schema_events_waits_history_long_sizeYes         Yes         Yes         Global      No
performance_schema_events_waits_history_sizeYes         Yes         Yes         Global      No
performance_schema_max_cond_classesYes         Yes         Yes         Global      No
performance_schema_max_cond_instancesYes         Yes         Yes         Global      No
performance_schema_max_file_classesYes         Yes         Yes         Global      No
performance_schema_max_file_handlesYes         Yes         Yes         Global      No
performance_schema_max_file_instancesYes         Yes         Yes         Global      No
performance_schema_max_mutex_classesYes         Yes         Yes         Global      No
performance_schema_max_mutex_instancesYes         Yes         Yes         Global      No
performance_schema_max_rwlock_classesYes         Yes         Yes         Global      No
performance_schema_max_rwlock_instancesYes         Yes         Yes         Global      No
performance_schema_max_table_handlesYes         Yes         Yes         Global      No
performance_schema_max_table_instancesYes         Yes         Yes         Global      No
performance_schema_max_thread_classesYes         Yes         Yes         Global      No
performance_schema_max_thread_instancesYes         Yes         Yes         Global      No
pid-file       Yes         Yes                                 No
- _Variable_:                          Yes         Global      No
pid_file                                                       
plugin_dir     Yes         Yes         Yes         Global      No
port           Yes         Yes         Yes         Global      No
preload_buffer_sizeYes         Yes         Yes         Both        Yes
profiling                              Yes         Both        Yes
profiling_history_sizeYes         Yes         Yes         Both        Yes
protocol_version                        Yes         Global      No
proxy_user                             Yes         Session     No
pseudo_slave_mode                        Yes         Session     Yes
pseudo_thread_id                        Yes         Session     Yes
query_alloc_block_sizeYes         Yes         Yes         Both        Yes
query_cache_limitYes         Yes         Yes         Global      Yes
query_cache_min_res_unitYes         Yes         Yes         Global      Yes
query_cache_sizeYes         Yes         Yes         Global      Yes
query_cache_typeYes         Yes         Yes         Both        Yes
query_cache_wlock_invalidateYes         Yes         Yes         Both        Yes
query_prealloc_sizeYes         Yes         Yes         Both        Yes
rand_seed1                             Yes         Session     Yes
rand_seed2                             Yes         Session     Yes
range_alloc_block_sizeYes         Yes         Yes         Both        Yes
read_buffer_sizeYes         Yes         Yes         Both        Yes
read_only      Yes         Yes         Yes         Global      Yes
read_rnd_buffer_sizeYes         Yes         Yes         Both        Yes
relay-log      Yes         Yes                                 No
- _Variable_:                          Yes         Global      No
relay_log                                                      
relay-log-indexYes         Yes                                 No
- _Variable_:                          Yes         Global      No
relay_log_index                                                
relay_log_indexYes         Yes         Yes         Global      No
relay_log_info_fileYes         Yes         Yes         Global      No
relay_log_purgeYes         Yes         Yes         Global      Yes
relay_log_recoveryYes         Yes         Yes         Global      No
relay_log_space_limitYes         Yes         Yes         Global      No
report-host    Yes         Yes                                 No
- _Variable_:                          Yes         Global      No
report_host                                                    
report-passwordYes         Yes                                 No
- _Variable_:                          Yes         Global      No
report_password                                                
report-port    Yes         Yes                                 No
- _Variable_:                          Yes         Global      No
report_port                                                    
report-user    Yes         Yes                                 No
- _Variable_:                          Yes         Global      No
report_user                                                    
rpl_recovery_rank                        Yes         Global      Yes
rpl_semi_sync_master_enabled                        Yes         Global      Yes
rpl_semi_sync_master_timeout                        Yes         Global      Yes
rpl_semi_sync_master_trace_level                        Yes         Global      Yes
rpl_semi_sync_master_wait_no_slave                        Yes         Global      Yes
rpl_semi_sync_slave_enabled                        Yes         Global      Yes
rpl_semi_sync_slave_trace_level                        Yes         Global      Yes
safe-show-databaseYes         Yes         Yes         Global      Yes
secure-auth    Yes         Yes                                 Yes
- _Variable_:                          Yes         Global      Yes
secure_auth                                                    
secure-file-privYes         Yes                                 No
- _Variable_:                          Yes         Global      No
secure_file_priv                                                
server-id      Yes         Yes                                 Yes
- _Variable_:                          Yes         Global      Yes
server_id                                                      
server-id-bits Yes         Yes                                 No
- _Variable_:                          Yes         Global      No
server_id_bits                                                 
shared_memory                          Yes         Global      No
shared_memory_base_name                        Yes         Global      No
skip_external_lockingYes         Yes         Yes         Global      No
skip-name-resolveYes         Yes                                 No
- _Variable_:                          Yes         Global      No
skip_name_resolve                                                
skip-networkingYes         Yes                                 No
- _Variable_:                          Yes         Global      No
skip_networking                                                
skip-show-databaseYes         Yes                                 No
- _Variable_:                          Yes         Global      No
skip_show_database                                                
slave_allow_batchingYes         Yes         Yes         Global      Yes
slave_compressed_protocolYes         Yes         Yes         Global      Yes
slave_exec_modeYes         Yes         Yes         Global      Yes
slave-load-tmpdirYes         Yes                                 No
- _Variable_:                          Yes         Global      No
slave_load_tmpdir                                                
slave_max_allowed_packet                        Yes         Global      Yes
slave-net-timeoutYes         Yes                                 Yes
- _Variable_:                          Yes         Global      Yes
slave_net_timeout                                                
slave-skip-errorsYes         Yes                                 No
- _Variable_:                          Yes         Global      No
slave_skip_errors                                                
slave_transaction_retriesYes         Yes         Yes         Global      Yes
slave_type_conversionsYes         Yes         Yes         Global      No
slow_launch_timeYes         Yes         Yes         Global      Yes
slow-query-log Yes         Yes                                 Yes
- _Variable_:                          Yes         Global      Yes
slow_query_log                                                 
slow_query_log_fileYes         Yes         Yes         Global      Yes
socket         Yes         Yes         Yes         Global      No
sort_buffer_sizeYes         Yes         Yes         Both        Yes
sql_auto_is_null                        Yes         Both        Yes
sql_big_selects                        Yes         Both        Yes
sql_big_tables                         Yes         Both        Yes
sql_buffer_result                        Yes         Both        Yes
sql_log_bin                            Yes         Both        Yes
sql_log_off                            Yes         Both        Yes
sql_log_update                         Yes         Session     Yes
sql_low_priority_updates                        Yes         Both        Yes
sql_max_join_size                        Yes         Both        Yes
sql-mode       Yes         Yes                                 Yes
- _Variable_:                          Yes         Both        Yes
sql_mode                                                       
sql_notes                              Yes         Both        Yes
sql_quote_show_create                        Yes         Both        Yes
sql_safe_updates                        Yes         Both        Yes
sql_select_limit                        Yes         Both        Yes
sql_slave_skip_counter                        Yes         Global      Yes
sql_warnings                           Yes         Both        Yes
ssl-ca         Yes         Yes                                 No
- _Variable_:                          Yes         Global      No
ssl_ca                                                         
ssl-capath     Yes         Yes                                 No
- _Variable_:                          Yes         Global      No
ssl_capath                                                     
ssl-cert       Yes         Yes                                 No
- _Variable_:                          Yes         Global      No
ssl_cert                                                       
ssl-cipher     Yes         Yes                                 No
- _Variable_:                          Yes         Global      No
ssl_cipher                                                     
ssl-key        Yes         Yes                                 No
- _Variable_:                          Yes         Global      No
ssl_key                                                        
storage_engine                         Yes         Both        Yes
stored_program_cacheYes         Yes         Yes         Global      Yes
sync_binlog    Yes         Yes         Yes         Global      Yes
sync_frm       Yes         Yes         Yes         Global      Yes
sync_master_infoYes         Yes         Yes         Global      Yes
sync_relay_log Yes         Yes         Yes         Global      Yes
sync_relay_log_infoYes         Yes         Yes         Global      Yes
system_time_zone                        Yes         Global      No
table_definition_cache                        Yes         Global      Yes
table_lock_wait_timeoutYes         Yes         Yes         Global      Yes
table_open_cache                        Yes         Global      Yes
table_type                             Yes         Both        Yes
thread_cache_sizeYes         Yes         Yes         Global      Yes
thread_concurrencyYes         Yes         Yes         Global      No
thread_handlingYes         Yes         Yes         Global      No
thread_pool_algorithmYes         Yes         Yes         Global      No
thread_pool_high_priority_connectionYes         Yes         Yes         Both        Yes
thread_pool_max_unused_threadsYes         Yes         Yes         Global      Yes
thread_pool_prio_kickup_timerYes         Yes         Yes         Both        Yes
thread_pool_sizeYes         Yes         Yes         Global      No
thread_pool_stall_limitYes         Yes         Yes         Global      Yes
thread_stack   Yes         Yes         Yes         Global      No
time_format                            Yes         Global      No
time_zone                              Yes         Both        Yes
timed_mutexes  Yes         Yes         Yes         Global      Yes
timestamp                              Yes         Session     Yes
tmp_table_size Yes         Yes         Yes         Both        Yes
tmpdir         Yes         Yes         Yes         Global      No
transaction_alloc_block_sizeYes         Yes         Yes         Both        Yes
transaction_allow_batching                        Yes         Session     Yes
transaction_prealloc_sizeYes         Yes         Yes         Both        Yes
tx_isolation                           Yes         Both        Yes
unique_checks                          Yes         Both        Yes
updatable_views_with_limitYes         Yes         Yes         Both        Yes
version                                Yes         Global      No
version_comment                        Yes         Global      No
version_compile_machine                        Yes         Global      No
version_compile_os                        Yes         Global      No
wait_timeout   Yes         Yes         Yes         Both        Yes
warning_count                          Yes         Session     No

For additional system variable information, see these sections:

   * *Note using-system-variables::, discusses the syntax for setting
     and displaying system variable values.

   * *Note dynamic-system-variables::, lists the variables that can be
     set at runtime.

   * Information on tuning system variables can be found in *Note
     server-parameters::.

   * *Note innodb-parameters::, lists `InnoDB' system variables.

   * *Note mysql-cluster-system-variables::, lists system variables
     which are specific to MySQL Cluster.

   * For information on server system variables specific to
     replication, see *Note replication-options::.

*Note*:

Some of the following variable descriptions refer to `enabling' or
`disabling' a variable.  These variables can be enabled with the *Note
`SET': set-statement.  statement by setting them to `ON' or `1', or
disabled by setting them to `OFF' or `0'. However, before MySQL 5.5.10,
to set such a variable on the command line or in an option file, you
must set it to `1' or `0'; setting it to `ON' or `OFF' will not work.
For example, on the command line, `--delay_key_write=1' works but
`--delay_key_write=ON' does not. As of MySQL 5.5.10, boolean variables
can be set at startup to the values `ON', `TRUE', `OFF', and `FALSE'
(not case sensitive). See *Note option-modifiers::.

Some system variables control the size of buffers or caches. For a
given buffer, the server might need to allocate internal data
structures. These structures typically are allocated from the total
memory allocated to the buffer, and the amount of space required might
be platform dependent. This means that when you assign a value to a
system variable that controls a buffer size, the amount of space
actually available might differ from the value assigned. In some cases,
the amount might be less than the value assigned. It is also possible
that the server will adjust a value upward. For example, if you assign
a value of 0 to a variable for which the minimal value is 1024, the
server will set the value to 1024.

Values for buffer sizes, lengths, and stack sizes are given in bytes
unless otherwise specified.

Some system variables take file name values. Unless otherwise
specified, the default file location is the data directory if the value
is a relative path name. To specify the location explicitly, use an
absolute path name. Suppose that the data directory is
`/var/mysql/data'. If a file-valued variable is given as a relative
path name, it will be located under `/var/mysql/data'. If the value is
an absolute path name, its location is as given by the path name.

   *  `authentication_windows_log_level'

     Options for authentication_windows_log_level

     *Introduced*         5.5.16          
     *Command-Line        `--authentication_windows_log_level'        
     Format*                              
     *Option-File Format* `authentication_windows_log_level'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          4'              

     This variable is available only if the `authentication_windows'
     Windows authentication plugin is enabled and debugging code is
     enabled. See *Note windows-authentication-plugin::.

     This variable sets the logging level for the Windows
     authentication plugin. The following table shows the permitted
     values.

     This table describes permitted values for the
     `authentication_windows' system variable.

     Value   Description
     0       No logging
     1       Log only error messages
     2       Log level 1 messages and warning messages
     3       Log level 2 messages and information notes
     4       Log level 3 messages and debug messages

     This variable was added in MySQL 5.5.16.

   *  `authentication_windows_use_principal_name'

     Options for authentication_windows_use_principal_name

     *Introduced*         5.5.16          
     *Command-Line        `--authentication_windows_use_principal_name'        
     Format*                              
     *Option-File Format* `authentication_windows_use_principal_name'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            

     This variable is available only if the `authentication_windows'
     Windows authentication plugin is enabled. See *Note
     windows-authentication-plugin::.

     A client that authenticates using the `InitSecurityContext()'
     function should provide a string identifying the service to which
     it connects (TARGETNAME). MySQL uses the principal name (UPN) of
     the account under which the server is running. The UPN has the form
     `USER_ID@COMPUTER_NAME' and need not be registered anywhere to be
     used. This UPN is sent by the server at the beginning of
     authentication handshake.

     This variable controls whether the server sends the UPN in the
     initial challenge. By default, the variable is enabled. For
     security reasons, it can be disabled to avoid sending the server's
     account name to a client in clear text. If the variable is
     disabled, the server always sends a `0x00' byte in the first
     challenge, the client does not specify TARGETNAME, and as a
     result, NTLM authentication is used.

     If the server fails to obtain its UPN (which will happen primarily
     in environments that do not support Kerberos authentication), the
     UPN is not sent by the server and NTLM authentication is used.

     This variable was added in MySQL 5.5.16.

   *  `autocommit'

     Options for autocommit

     *Command-Line        `--autocommit[=#]'from    
     Format*                      5.5.8   
     *Option-File Format* `autocommit'from    
                                  5.5.8   
     *System Variable     `autocommit'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            

     The autocommit mode. If set to 1, all changes to a table take
     effect immediately. If set to 0, you must use *Note `COMMIT':
     commit. to accept a transaction or *Note `ROLLBACK': commit.  to
     cancel it. If `autocommit' is 0 and you change it to 1, MySQL
     performs an automatic *Note `COMMIT': commit. of any open
     transaction.  Another way to begin a transaction is to use a *Note
     `START TRANSACTION': commit. or *Note `BEGIN': commit.  statement.
     See *Note commit::.

     By default, client connections begin with `autocommit' set to 1.
     To cause clients to begin with a default of 0, set the global
     `autocommit' value by starting the server with the
     `--autocommit=0' option. To set the variable using an option file,
     include these lines:

          [mysqld]
          autocommit=0

     Before MySQL 5.5.8, the global `autocommit' value cannot be set at
     startup. As a workaround, set the `init_connect' system variable:

          SET GLOBAL init_connect='SET autocommit=0';

     The `init_connect' variable can also be set on the command line or
     in an option file. To set the variable as just shown using an
     option file, include these lines:

          [mysqld]
          init_connect='SET autocommit=0'

     The content of `init_connect' is not executed for users that have
     the `SUPER' privilege (unlike the effect of setting the global
     `autocommit' value at startup).

   *  `automatic_sp_privileges'

     Options for automatic_sp_privileges

     *System Variable     `automatic_sp_privileges'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `TRUE'          

     When this variable has a value of 1 (the default), the server
     automatically grants the `EXECUTE' and `ALTER ROUTINE' privileges
     to the creator of a stored routine, if the user cannot already
     execute and alter or drop the routine. (The `ALTER ROUTINE'
     privilege is required to drop the routine.) The server also
     automatically drops those privileges from the creator when the
     routine is dropped. If `automatic_sp_privileges' is 0, the server
     does not automatically add or drop these privileges.

     The creator of a routine is the account used to execute the
     `CREATE' statement for it. This might not be the same as the
     account named as the `DEFINER' in the routine definition.

     See also *Note stored-routines-privileges::.

   *  `back_log'

     Options for back_log

     *System Variable     `back_log'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `50'            
     *Range*              `1 ..           
                          65535'          

     The number of outstanding connection requests MySQL can have.
     This comes into play when the main MySQL thread gets very many
     connection requests in a very short time. It then takes some time
     (although very little) for the main thread to check the connection
     and start a new thread. The `back_log' value indicates how many
     requests can be stacked during this short time before MySQL
     momentarily stops answering new requests. You need to increase
     this only if you expect a large number of connections in a short
     period of time.

     In other words, this value is the size of the listen queue for
     incoming TCP/IP connections. Your operating system has its own
     limit on the size of this queue. The manual page for the Unix
     `listen()' system call should have more details. Check your OS
     documentation for the maximum value for this variable. `back_log'
     cannot be set higher than your operating system limit.

   *  `basedir'

     Options for basedir

     *Command-Line        `--basedir=path'        
     Format*                              
                          `-b'            
     *Option-File Format* `basedir'        
     *System Variable     `basedir'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The MySQL installation base directory. This variable can be set
     with the `--basedir' option.  Relative path names for other
     variables usually are resolved relative to the base directory.

   *  `big_tables'

     If set to 1, all temporary tables are stored on disk rather than
     in memory. This is a little slower, but the error `The table
     TBL_NAME is full' does not occur for *Note `SELECT': select.
     operations that require a large temporary table. The default value
     for a new connection is 0 (use in-memory temporary tables).
     Normally, you should never need to set this variable, because
     in-memory tables are automatically converted to disk-based tables
     as required.

     *Note*:

     This variable was formerly named `sql_big_tables'.

   *  `bulk_insert_buffer_size'

     Options for bulk_insert_buffer_size

     *Command-Line        `--bulk_insert_buffer_size=#'        
     Format*                              
     *Option-File Format* `bulk_insert_buffer_size'        
     *System Variable     `bulk_insert_buffer_size'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `8388608'        
     *Range*              `0 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `8388608'        
     *Range*              `0 ..           
                          18446744073709547520'        

     `MyISAM' uses a special tree-like cache to make bulk inserts
     faster for *Note `INSERT ... SELECT': insert-select, `INSERT ...
     VALUES (...), (...), ...', and *Note `LOAD DATA INFILE':
     load-data. when adding data to nonempty tables. This variable
     limits the size of the cache tree in bytes per thread. Setting it
     to 0 disables this optimization. The default value is 8MB.

   *  `character_set_client'

     Options for character_set_client

     *System Variable     `character_set_client'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The character set for statements that arrive from the client.  The
     session value of this variable is set using the character set
     requested by the client when the client connects to the server.
     (Many clients support a `--default-character-set' option to enable
     this character set to be specified explicitly. See also *Note
     charset-connection::.) The global value of the variable is used to
     set the session value in cases when the client-requested value is
     unknown or not available, or the server is configured to ignore
     client requests:

        * The client is from a version of MySQL older than MySQL 4.1,
          and thus does not request a character set.

        * The client requests a character set not known to the server.
          For example, a Japanese-enabled client requests `sjis' when
          connecting to a server not configured with `sjis' support.

        * *Note `mysqld': mysqld. was started with the
          `--skip-character-set-client-handshake' option, which causes
          it to ignore client character set configuration. This
          reproduces MySQL 4.0 behavior and is useful should you wish
          to upgrade the server without upgrading all the clients.

     `ucs2', `utf16', and `utf32' cannot be used as a client character
     set, which means that they also do not work for `SET NAMES' or
     `SET CHARACTER SET'.

   *  `character_set_connection'

     Options for character_set_connection

     *System Variable     `character_set_connection'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The character set used for literals that do not have a character
     set introducer and for number-to-string conversion.

   *  `character_set_database'

     Options for character_set_database

     *System Variable     `character_set_database'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
     *Footnote*           This            
                          option          
                          is              
                          dynamic,        
                          but             
                          only            
                          the             
                          server          
                          should          
                          set             
                          this            
                          information.        
                          You             
                          should          
                          not             
                          set             
                          the             
                          value           
                          of              
                          this            
                          variable        
                          manually.        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The character set used by the default database. The server sets
     this variable whenever the default database changes. If there is
     no default database, the variable has the same value as
     `character_set_server'.

   *  `character_set_filesystem'

     Options for character-set-filesystem

     *Command-Line        `--character-set-filesystem=name'        
     Format*                              
     *Option-File Format* `character-set-filesystem'        
     *System Variable     `character_set_filesystem'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The file system character set. This variable is used to interpret
     string literals that refer to file names, such as in the *Note
     `LOAD DATA INFILE': load-data. and *Note `SELECT ... INTO
     OUTFILE': select-into. statements and the `LOAD_FILE()' function.
     Such file names are converted from `character_set_client' to
     `character_set_filesystem' before the file opening attempt occurs.
     The default value is `binary', which means that no conversion
     occurs. For systems on which multi-byte file names are permitted,
     a different value may be more appropriate. For example, if the
     system represents file names using UTF-8, set
     `character_set_filesystem' to `'utf8''.

   *  `character_set_results'

     Options for character_set_results

     *System Variable     `character_set_results'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The character set used for returning query results such as result
     sets or error messages to the client.

   *  `character_set_server'

     Options for character-set-server

     *Command-Line        `--character-set-server'        
     Format*                              
     *Option-File Format* `character-set-server'        
     *System Variable     `character_set_server'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The server's default character set.

   *  `character_set_system'

     Options for character_set_system

     *System Variable     `character_set_system'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The character set used by the server for storing identifiers.  The
     value is always `utf8'.

   *  `character_sets_dir'

     Options for character-sets-dir

     *Command-Line        `--character-sets-dir=path'        
     Format*                              
     *Option-File Format* `character-sets-dir'        
     *System Variable     `character_sets_dir'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `directory        
                          name'           

     The directory where character sets are installed.

   *  `collation_connection'

     Options for collation_connection

     *System Variable     `collation_connection'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The collation of the connection character set.

   *  `collation_database'

     Options for collation_database

     *System Variable     `collation_database'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
     *Footnote*           This            
                          option          
                          is              
                          dynamic,        
                          but             
                          only            
                          the             
                          server          
                          should          
                          set             
                          this            
                          information.        
                          You             
                          should          
                          not             
                          set             
                          the             
                          value           
                          of              
                          this            
                          variable        
                          manually.        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The collation used by the default database. The server sets this
     variable whenever the default database changes. If there is no
     default database, the variable has the same value as
     `collation_server'.

   *  `collation_server'

     Options for collation-server

     *Command-Line        `--collation-server'        
     Format*                              
     *Option-File Format* `collation-server'        
     *System Variable     `collation_server'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The server's default collation.

   *  `completion_type'

     Options for completion_type

     *Command-Line        `--completion_type=#'        
     Format*                              
     *Option-File Format* `completion_type'        
     *System Variable     `completion_type'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values          
                          (<=             
                          5.5.2)*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Valid Values*       `0'             
     `1'                                  
     `2'                                  
                          *Permitted        
                          Values          
                          (>=             
                          5.5.3)*         
     *Type*               `enumeration'        
     *Default*            `NO_CHAIN'        
     *Valid Values*       `NO_CHAIN'        
     `CHAIN'                              
     `RELEASE'                            
     `0'                                  
     `1'                                  
     `2'                                  

     The transaction completion type. This variable can take the values
     shown in the following table. As of MySQL 5.5.3, the variable can
     be assigned using either the name values or corresponding integer
     values. Before 5.5.3, only the integer values can be used.

     This table describes values that may be specified for the
     `completion_type' system variable.

     Value   Description
     `NO_CHAIN'*Note `COMMIT': commit. and *Note `ROLLBACK':
     (or 0)  commit.  are unaffected. This is the default
             value.
     `CHAIN' *Note `COMMIT': commit. and *Note `ROLLBACK':
     (or 1)  commit.  are equivalent to `COMMIT AND CHAIN' and
             `ROLLBACK AND CHAIN', respectively. (A new
             transaction starts immediately with the same
             isolation level as the just-terminated
             transaction.)
     `RELEASE'*Note `COMMIT': commit. and *Note `ROLLBACK':
     (or 2)  commit.  are equivalent to `COMMIT RELEASE' and
             `ROLLBACK RELEASE', respectively.  (The server
             disconnects after terminating the transaction.)

     `completion_type' affects transactions that begin with *Note
     `START TRANSACTION': commit. or *Note `BEGIN': commit. and end
     with *Note `COMMIT': commit. or *Note `ROLLBACK': commit. It does
     not apply to implicit commits resulting from execution of the
     statements listed in *Note implicit-commit::. It also does not
     apply for *Note `XA COMMIT': xa-statements, *Note `XA ROLLBACK':
     xa-statements, or when `autocommit=1'.

   *  `concurrent_insert'

     Options for concurrent_insert

     *Command-Line        `--concurrent_insert[=#]'        
     Format*                              
     *Option-File Format* `concurrent_insert'        
     *System Variable     `concurrent_insert'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values          
                          (<=             
                          5.5.2)*         
     *Type*               `numeric'        
     *Default*            `1'             
     *Valid Values*       `0'             
     `1'                                  
     `2'                                  
                          *Permitted        
                          Values          
                          (>=             
                          5.5.3)*         
     *Type*               `enumeration'        
     *Default*            `AUTO'          
     *Valid Values*       `NEVER'         
     `AUTO'                               
     `ALWAYS'                             
     `0'                                  
     `1'                                  
     `2'                                  

     If `AUTO' (the default), MySQL permits *Note `INSERT': insert. and
     *Note `SELECT': select. statements to run concurrently for
     `MyISAM' tables that have no free blocks in the middle of the data
     file. If you start *Note `mysqld': mysqld. with `--skip-new', this
     variable is set to `NEVER'.

     This variable can take the values shown in the following table. As
     of MySQL 5.5.3, the variable can be assigned using either the name
     values or corresponding integer values. Before 5.5.3, only the
     integer values can be used.

     This table describes values that may be specified for the
     `concurrent_insert' system variable.

     Value   Description
     `NEVER' Disables concurrent inserts
     (or 0)  
     `AUTO'  (Default) Enables concurrent insert for `MyISAM'
     (or 1)  tables that do not have holes
     `ALWAYS'Enables concurrent inserts for all `MyISAM'
     (or 2)  tables, even those that have holes. For a table
             with a hole, new rows are inserted at the end of
             the table if it is in use by another thread.
             Otherwise, MySQL acquires a normal write lock and
             inserts the row into the hole.

     See also *Note concurrent-inserts::.

   *  `connect_timeout'

     Options for connect_timeout

     *Command-Line        `--connect_timeout=#'        
     Format*                              
     *Option-File Format* `connect_timeout'        
     *System Variable     `connect_timeout'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `10'            

     The number of seconds that the *Note `mysqld': mysqld.  server
     waits for a connect packet before responding with `Bad handshake'.
     The default value is 10 seconds.

     Increasing the `connect_timeout' value might help if clients
     frequently encounter errors of the form `Lost connection to MySQL
     server at 'XXX', system error: ERRNO'.

   *  `datadir'

     Options for datadir

     *Command-Line        `--datadir=path'        
     Format*                              
                          `-h'            
     *Option-File Format* `datadir'        
     *System Variable     `datadir'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The MySQL data directory. This variable can be set with the
     `--datadir' option.

   *  `date_format'

     This variable is unused.

   *  `datetime_format'

     This variable is unused.

   *  `debug'

     Options for debug

     *Command-Line        `--debug[=debug_options]'        
     Format*                              
     *Option-File Format* `debug'         
     *System Variable     `debug'         
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `'d:t:o,/tmp/mysqld.trace''        

     This variable indicates the current debugging settings. It is
     available only for servers built with debugging support. The
     initial value comes from the value of instances of the `--debug'
     option given at server startup. The global and session values may
     be set at runtime; the `SUPER' privilege is required, even for the
     session value.

     Assigning a value that begins with `+' or `-' cause the value to
     added to or subtracted from the current value:

          mysql> SET debug = 'T';
          mysql> SELECT @@debug;
          +---------+
          | @@debug |
          +---------+
          | T       |
          +---------+

          mysql> SET debug = '+P';
          mysql> SELECT @@debug;
          +---------+
          | @@debug |
          +---------+
          | P:T     |
          +---------+

          mysql> SET debug = '-P';
          mysql> SELECT @@debug;
          +---------+
          | @@debug |
          +---------+
          | T       |
          +---------+

     For more information, see *Note dbug-package::.

   *  `debug_sync'

     Options for debug_sync

     *System Variable     `debug_sync'        
     Name*                                
     *Variable Scope*     Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        

     This variable is the user interface to the Debug Sync facility.
     Use of Debug Sync requires that MySQL be configured with the
     `-DENABLE_DEBUG_SYNC=1' option (see *Note
     source-configuration-options::).  If Debug Sync is not compiled
     in, this system variable is not available.

     The global variable value is read only and indicates whether the
     facility is enabled. By default, Debug Sync is disabled and the
     value of `debug_sync' is `OFF'. If the server is started with
     `--debug-sync-timeout=N', where N is a timeout value greater than
     0, Debug Sync is enabled and the value of `debug_sync' is `ON -
     current signal' followed by the signal name. Also, N becomes the
     default timeout for individual synchronization points.

     The session value can be read by any user and will have the same
     value as the global variable. The session value can be set by
     users that have the `SUPER' privilege to control synchronization
     points.

     For a description of the Debug Sync facility and how to use
     synchronization points, see MySQL Internals: Test Synchronization
     (http://dev.mysql.com/doc/internals/en/test-synchronization.html).

   *  `default_storage_engine'

     Options for default-storage-engine

     *Command-Line        `--default-storage-engine=name'        
     Format*                              
     *Option-File Format* `default-storage-engine'        
     *System Variable     `default_storage_engine'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values          
                          (<=             
                          5.5.4)*         
     *Type*               `enumeration'        
     *Default*            `MyISAM'        
                          *Permitted        
                          Values          
                          (>=             
                          5.5.5)*         
     *Type*               `enumeration'        
     *Default*            `InnoDB'        

     The default storage engine. To set the storage engine at server
     startup, use the `--default-storage-engine' option. See *Note
     server-options::.

     If you disable the default storage engine at server startup, you
     must set the default engine to a different engine or the server
     will not start.

     This variable was added in MySQL 5.5.3 to be used in preference to
     `storage_engine', which is now deprecated.

   *  `default_week_format'

     Options for default_week_format

     *Command-Line        `--default_week_format=#'        
     Format*                              
     *Option-File Format* `default_week_format'        
     *System Variable     `default_week_format'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          7'              

     The default mode value to use for the `WEEK()' function. See *Note
     date-and-time-functions::.

   *  `delay_key_write'

     Options for delay-key-write

     *Command-Line        `--delay-key-write[=name]'        
     Format*                              
     *Option-File Format* `delay-key-write'        
     *System Variable     `delay_key_write'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `ON'            
     *Valid Values*       `ON'            
     `OFF'                                
     `ALL'                                

     This option applies only to `MyISAM' tables.  It can have one of
     the following values to affect handling of the `DELAY_KEY_WRITE'
     table option that can be used in *Note `CREATE TABLE':
     create-table.  statements.

     This table describes options that may be specified for the
     `delay_key_write' system variable.

     Option  Description
     `OFF'   `DELAY_KEY_WRITE' is ignored.
     `ON'    MySQL honors any `DELAY_KEY_WRITE' option
             specified in *Note `CREATE TABLE': create-table.
             statements. This is the default value.
     `ALL'   All new opened tables are treated as if they were
             created with the `DELAY_KEY_WRITE' option enabled.

     If `DELAY_KEY_WRITE' is enabled for a table, the key buffer is not
     flushed for the table on every index update, but only when the
     table is closed. This speeds up writes on keys a lot, but if you
     use this feature, you should add automatic checking of all
     `MyISAM' tables by starting the server with the
     `--myisam-recover-options' option (for example,
     `--myisam-recover-options=BACKUP,FORCE').  See *Note
     server-options::, and *Note myisam-start::.

     *Warning*:

     If you enable external locking with `--external-locking', there is
     no protection against index corruption for tables that use delayed
     key writes.

   *  `delayed_insert_limit'

     Options for delayed_insert_limit

     *Command-Line        `--delayed_insert_limit=#'        
     Format*                              
     *Option-File Format* `delayed_insert_limit'        
     *System Variable     `delayed_insert_limit'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `100'           
     *Range*              `1 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `100'           
     *Range*              `1 ..           
                          18446744073709547520'        

     After inserting `delayed_insert_limit' delayed rows, the *Note
     `INSERT DELAYED': insert-delayed.  handler thread checks whether
     there are any *Note `SELECT': select. statements pending. If so,
     it permits them to execute before continuing to insert delayed
     rows.

   *  `delayed_insert_timeout'

     Options for delayed_insert_timeout

     *Command-Line        `--delayed_insert_timeout=#'        
     Format*                              
     *Option-File Format* `delayed_insert_timeout'        
     *System Variable     `delayed_insert_timeout'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `300'           

     How many seconds an *Note `INSERT DELAYED': insert-delayed.
     handler thread should wait for *Note `INSERT': insert. statements
     before terminating.

   *  `delayed_queue_size'

     Options for delayed_queue_size

     *Command-Line        `--delayed_queue_size=#'        
     Format*                              
     *Option-File Format* `delayed_queue_size'        
     *System Variable     `delayed_queue_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `1000'          
     *Range*              `1 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `1000'          
     *Range*              `1 ..           
                          18446744073709547520'        

     This is a per-table limit on the number of rows to queue when
     handling *Note `INSERT DELAYED': insert-delayed.  statements. If
     the queue becomes full, any client that issues an *Note `INSERT
     DELAYED': insert-delayed. statement waits until there is room in
     the queue again.

   *  `div_precision_increment'

     Options for div_precision_increment

     *Command-Line        `--div_precision_increment=#'        
     Format*                              
     *Option-File Format* `div_precision_increment'        
     *System Variable     `div_precision_increment'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `4'             
     *Range*              `0 ..           
                          30'             

     This variable indicates the number of digits by which to increase
     the scale of the result of division operations performed with the
     `/' operator.  The default value is 4. The minimum and maximum
     values are 0 and 30, respectively. The following example
     illustrates the effect of increasing the default value.

          mysql> SELECT 1/7;
          +--------+
          | 1/7    |
          +--------+
          | 0.1429 |
          +--------+
          mysql> SET div_precision_increment = 12;
          mysql> SELECT 1/7;
          +----------------+
          | 1/7            |
          +----------------+
          | 0.142857142857 |
          +----------------+

   *  `engine_condition_pushdown'

     Options for engine-condition-pushdown

     *Deprecated*         5.5.3,          
                          by              
                          optimizer_switch        
     *Command-Line        `--engine-condition-pushdown'        
     Format*                              
     *Option-File Format* `engine-condition-pushdown'        
     *System Variable     `engine_condition_pushdown'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            

     The engine condition pushdown optimization enables processing for
     certain comparisons to be `pushed down' to the storage engine
     level for more efficient execution. For more information, see
     *Note condition-pushdown-optimization::.

     Engine condition pushdown is used only by the *Note `NDBCLUSTER':
     mysql-cluster. storage engine.  Enabling this optimization on a
     MySQL Server acting as a MySQL Cluster SQL node causes `WHERE'
     conditions on unindexed columns to be evaluated on the cluster's
     data nodes and only the rows that match to be sent back to the SQL
     node that issued the query. This greatly reduces the amount of
     cluster data that must be sent over the network, increasing the
     efficiency with which results are returned.

     The `engine_condition_pushdown' variable controls whether engine
     condition pushdown is enabled. By default, this variable is `ON'
     (1). Setting it to `OFF' (0) disables pushdown.

     This variable is deprecated as of MySQL 5.5.3 and is removed in
     MySQL 5.6. Use the `engine_condition_pushdown' flag of the
     `optimizer_switch' variable instead. See *Note
     switchable-optimizations::.

   *  `error_count'

     The number of errors that resulted from the last statement that
     generated messages. This variable is read only. See *Note
     show-errors::.

   *  `event_scheduler'

     Options for event-scheduler

     *Command-Line        `--event-scheduler[=value]'        
     Format*                              
     *Option-File Format* `event-scheduler'        
     *System Variable     `event_scheduler'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `OFF'           
     *Valid Values*       `ON'            
     `OFF'                                
     `DISABLED'                           

     This variable indicates the status of the Event Scheduler;
     possible values are `ON', `OFF', and `DISABLED', with the default
     being `OFF'. This variable and its effects on the Event
     Scheduler's operation are discussed in greater detail in the
     Overview section of the Events chapter.

   *  `expire_logs_days'

     Options for expire_logs_days

     *Command-Line        `--expire_logs_days=#'        
     Format*                              
     *Option-File Format* `expire_logs_days'        
     *System Variable     `expire_logs_days'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          99'             

     The number of days for automatic binary log file removal. The
     default is 0, which means `no automatic removal.' Possible
     removals happen at startup and when the binary log is flushed. Log
     flushing occurs as indicated in *Note server-logs::.

     To remove binary log files manually, use the *Note `PURGE BINARY
     LOGS': purge-binary-logs. statement.  See *Note
     purge-binary-logs::.

   *  `external_user'

     Options for external_user

     *Introduced*         5.5.7           
     *System Variable     `external_user'        
     Name*                                
     *Variable Scope*     Session         
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The external user name used during the authentication process, as
     set by the plugin used to authenticate the client. With native
     (built-in) MySQL authentication, or if the plugin does not set the
     value, this variable is `NULL'.  See *Note proxy-users::.

     This variable was added in MySQL 5.5.7.

   *  `flush'

     Options for flush

     *Command-Line        `--flush'        
     Format*                              
     *Option-File Format* `flush'         
     *System Variable     `flush'         
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     If `ON', the server flushes (synchronizes) all changes to disk
     after each SQL statement. Normally, MySQL does a write of all
     changes to disk only after each SQL statement and lets the
     operating system handle the synchronizing to disk. See *Note
     crashing::. This variable is set to `ON' if you start *Note
     `mysqld': mysqld. with the `--flush' option.

   *  `flush_time'

     Options for flush_time

     *Command-Line        `--flush_time=#'        
     Format*                              
     *Option-File Format* `flush_time'        
     *System Variable     `flush_time'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Min Value*          `0'             

     If this is set to a nonzero value, all tables are closed every
     `flush_time' seconds to free up resources and synchronize
     unflushed data to disk. This option is best used only on systems
     with minimal resources.

   *  `foreign_key_checks'

     If set to 1 (the default), foreign key constraints for `InnoDB'
     tables are checked. If set to 0, they are ignored. Disabling
     foreign key checking can be useful for reloading `InnoDB' tables
     in an order different from that required by their parent/child
     relationships. See *Note innodb-foreign-key-constraints::.

     Setting `foreign_key_checks' to 0 also affects data definition
     statements: *Note `DROP SCHEMA': drop-database. drops a schema
     even if it contains tables that have foreign keys that are
     referred to by tables outside the schema, and *Note `DROP TABLE':
     drop-table.  drops tables that have foreign keys that are referred
     to by other tables.

     *Note*:

     Setting `foreign_key_checks' to 1 does not trigger a scan of the
     existing table data.  Therefore, rows added to the table while
     `foreign_key_checks = 0' will not be verified for consistency.

   *  `ft_boolean_syntax'

     Options for ft_boolean_syntax

     *Command-Line        `--ft_boolean_syntax=name'        
     Format*                              
     *Option-File Format* `ft_boolean_syntax'        
     *System Variable     `ft_boolean_syntax'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `+              
                          -><()~*:""&|'        

     The list of operators supported by boolean full-text searches
     performed using `IN BOOLEAN MODE'. See *Note fulltext-boolean::.

     The default variable value is `'+ -><()~*:""&|''. The rules for
     changing the value are as follows:

        * Operator function is determined by position within the string.

        * The replacement value must be 14 characters.

        * Each character must be an ASCII nonalphanumeric character.

        * Either the first or second character must be a space.

        * No duplicates are permitted except the phrase quoting
          operators in positions 11 and 12. These two characters are
          not required to be the same, but they are the only two that
          may be.

        * Positions 10, 13, and 14 (which by default are set to ``:'',
          ``&'', and ``|'') are reserved for future extensions.

   *  `ft_max_word_len'

     Options for ft_max_word_len

     *Command-Line        `--ft_max_word_len=#'        
     Format*                              
     *Option-File Format* `ft_max_word_len'        
     *System Variable     `ft_max_word_len'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Min Value*          `10'            

     The maximum length of the word to be included in a `FULLTEXT'
     index.

     *Note*:

     `FULLTEXT' indexes must be rebuilt after changing this variable.
     Use `REPAIR TABLE TBL_NAME QUICK'.

   *  `ft_min_word_len'

     Options for ft_min_word_len

     *Command-Line        `--ft_min_word_len=#'        
     Format*                              
     *Option-File Format* `ft_min_word_len'        
     *System Variable     `ft_min_word_len'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `4'             
     *Min Value*          `1'             

     The minimum length of the word to be included in a `FULLTEXT'
     index.

     *Note*:

     `FULLTEXT' indexes must be rebuilt after changing this variable.
     Use `REPAIR TABLE TBL_NAME QUICK'.

   *  `ft_query_expansion_limit'

     Options for ft_query_expansion_limit

     *Command-Line        `--ft_query_expansion_limit=#'        
     Format*                              
     *Option-File Format* `ft_query_expansion_limit'        
     *System Variable     `ft_query_expansion_limit'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `20'            
     *Range*              `0 ..           
                          1000'           

     The number of top matches to use for full-text searches performed
     using `WITH QUERY EXPANSION'.

   *  `ft_stopword_file'

     Options for ft_stopword_file

     *Command-Line        `--ft_stopword_file=file_name'        
     Format*                              
     *Option-File Format* `ft_stopword_file'        
     *System Variable     `ft_stopword_file'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The file from which to read the list of stopwords for full-text
     searches. The server looks for the file in the data directory
     unless an absolute path name is given to specify a different
     directory. All the words from the file are used; comments are
     _not_ honored. By default, a built-in list of stopwords is used
     (as defined in the `storage/myisam/ft_static.c' file). Setting
     this variable to the empty string (`''') disables stopword
     filtering. See also *Note fulltext-stopwords::.

     *Note*:

     `FULLTEXT' indexes must be rebuilt after changing this variable or
     the contents of the stopword file.  Use `REPAIR TABLE TBL_NAME
     QUICK'.

   *  `general_log'

     Options for general-log

     *Command-Line        `--general-log'        
     Format*                              
     *Option-File Format* `general-log'        
     *System Variable     `general_log'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Whether the general query log is enabled. The value can be 0 (or
     `OFF') to disable the log or 1 (or `ON') to enable the log. The
     default value depends on whether the `--general_log' option is
     given.  The destination for log output is controlled by the
     `log_output' system variable; if that value is `NONE', no log
     entries are written even if the log is enabled.

   *  `general_log_file'

     Options for general_log_file

     *Command-Line        `--general-log-file=file_name'        
     Format*                              
     *Option-File Format* `general_log_file'        
     *System Variable     `general_log_file'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           
     *Default*            `host_name.log'        

     The name of the general query log file. The default value is
     `HOST_NAME.log', but the initial value can be changed with the
     `--general_log_file' option.

   *  `group_concat_max_len'

     Options for group_concat_max_len

     *Command-Line        `--group_concat_max_len=#'        
     Format*                              
     *Option-File Format* `group_concat_max_len'        
     *System Variable     `group_concat_max_len'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `1024'          
     *Range*              `4 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `1024'          
     *Range*              `4 ..           
                          18446744073709547520'        

     The maximum permitted result length in bytes for the
     `GROUP_CONCAT()' function. The default is 1024.

   *  `have_compress'

     `YES' if the `zlib' compression library is available to the server,
     `NO' if not. If not, the `COMPRESS()' and `UNCOMPRESS()' functions
     cannot be used.

   *  `have_crypt'

     `YES' if the `crypt()' system call is available to the server, `NO'
     if not. If not, the `ENCRYPT()' function cannot be used.

   *  `have_csv'

     `YES' if *Note `mysqld': mysqld. supports `CSV' tables, `NO' if
     not.

     This variable is deprecated and is removed in MySQL 5.6. Use *Note
     `SHOW ENGINES': show-engines. instead.

   *  `have_dynamic_loading'

     `YES' if *Note `mysqld': mysqld. supports dynamic loading of
     plugins, `NO' if not.

   *  `have_geometry'

     `YES' if the server supports spatial data types, `NO' if not.

   *  `have_innodb'

     `YES' if *Note `mysqld': mysqld. supports `InnoDB' tables.
     `DISABLED' if `--skip-innodb' is used.

     This variable is deprecated and is removed in MySQL 5.6. Use *Note
     `SHOW ENGINES': show-engines. instead.

   *  `have_openssl'

     This variable is an alias for `have_ssl'.

   *  `have_partitioning'

     `YES' if *Note `mysqld': mysqld. supports partitioning.

     This variable is deprecated and is removed in MySQL 5.6. Use *Note
     `SHOW PLUGINS': show-plugins. instead. For more information, see
     *Note partitioning::.

   *  `have_profiling'

     `YES' if statement profiling capability is present, `NO' if not.
     If present, the `profiling' system variable controls whether this
     capability is enabled or disabled. See *Note show-profiles::.

   *  `have_query_cache'

     `YES' if *Note `mysqld': mysqld. supports the query cache, `NO' if
     not.

   *  `have_rtree_keys'

     `YES' if `RTREE' indexes are available, `NO' if not. (These are
     used for spatial indexes in `MyISAM' tables.)

   *  `have_ssl'

     `YES' if *Note `mysqld': mysqld. supports SSL connections, `NO' if
     not.  `DISABLED' indicates that the server was compiled with SSL
     support, but but was not started with the appropriate `--ssl-XXX'
     options.  For more information, see *Note configuring-for-ssl::.

   *  `have_symlink'

     `YES' if symbolic link support is enabled, `NO' if not. This is
     required on Unix for support of the `DATA DIRECTORY' and `INDEX
     DIRECTORY' table options, and on Windows for support of data
     directory symlinks. If the server is started with the
     `--skip-symbolic-links' option, the value is `DISABLED'.

   *  `hostname'

     Options for hostname

     *System Variable     `hostname'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The server sets this variable to the server host name at startup.

   *  `identity'

     This variable is a synonym for the `last_insert_id' variable. It
     exists for compatibility with other database systems. You can read
     its value with `SELECT @@identity', and set it using `SET
     identity'.

   *  `init_connect'

     Options for init_connect

     *Command-Line        `--init-connect=name'        
     Format*                              
     *Option-File Format* `init_connect'        
     *System Variable     `init_connect'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        

     A string to be executed by the server for each client that
     connects. The string consists of one or more SQL statements,
     separated by semicolon characters. For example, each client
     session begins by default with autocommit mode enabled. For older
     servers (before MySQL 5.5.8), there is no global `autocommit'
     system variable to specify that autocommit should be disabled by
     default, but as a workaround `init_connect' can be used to achieve
     the same effect:

          SET GLOBAL init_connect='SET autocommit=0';

     The `init_connect' variable can also be set on the command line or
     in an option file. To set the variable as just shown using an
     option file, include these lines:

          [mysqld]
          init_connect='SET autocommit=0'

     The content of `init_connect' is not executed for users that have
     the `SUPER' privilege. This is done so that an erroneous value for
     `init_connect' does not prevent all clients from connecting. For
     example, the value might contain a statement that has a syntax
     error, thus causing client connections to fail. Not executing
     `init_connect' for users that have the `SUPER' privilege enables
     them to open a connection and fix the `init_connect' value.

   *  `init_file'

     Options for init-file

     *Command-Line        `--init-file=file_name'        
     Format*                              
     *Option-File Format* `init-file'        
     *System Variable     `init_file'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The name of the file specified with the `--init-file' option when
     you start the server. This should be a file containing SQL
     statements that you want the server to execute when it starts.
     Each statement must be on a single line and should not include
     comments. No statement terminator such as `;', `\g', or `\G'
     should be given at the end of each statement.

   * `innodb_XXX'

     *Note `InnoDB': innodb-storage-engine. system variables are listed
     in *Note innodb-parameters::. These variables control many aspects
     of storage, memory use, and I/O patterns for `InnoDB' tables, and
     are especially important now that *Note InnoDB is the default
     storage engine: innodb-default-se.

   *  `insert_id'

     The value to be used by the following *Note `INSERT': insert. or
     *Note `ALTER TABLE': alter-table. statement when inserting an
     `AUTO_INCREMENT' value. This is mainly used with the binary log.

   *  `interactive_timeout'

     Options for interactive_timeout

     *Command-Line        `--interactive_timeout=#'        
     Format*                              
     *Option-File Format* `interactive_timeout'        
     *System Variable     `interactive_timeout'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `28800'         
     *Min Value*          `1'             

     The number of seconds the server waits for activity on an
     interactive connection before closing it. An interactive client is
     defined as a client that uses the `CLIENT_INTERACTIVE' option to
     *Note `mysql_real_connect()': mysql-real-connect. See also
     `wait_timeout'.

   *  `join_buffer_size'

     Options for join_buffer_size

     *Command-Line        `--join_buffer_size=#'        
     Format*                              
     *Option-File Format* `join_buffer_size'        
     *System Variable     `join_buffer_size'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values          
                          (<=             
                          5.5.2)*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `131072'        
     *Range*              `8200           
                          ..              
                          4294967295'        
                          *Permitted        
                          Values          
                          (<=             
                          5.5.2)*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `131072'        
     *Range*              `8228           
                          ..              
                          18446744073709547520'        
                          *Permitted        
                          Values          
                          (>=             
                          5.5.3)*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `131072'        
     *Range*              `128            
                          ..              
                          18446744073709547520'        
                          *Permitted        
                          Values          
                          (>=             
                          5.5.3)*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `131072'        
     *Range*              `128            
                          ..              
                          4294967295'        

     The minimum size of the buffer that is used for plain index scans,
     range index scans, and joins that do not use indexes and thus
     perform full table scans. Normally, the best way to get fast joins
     is to add indexes. Increase the value of `join_buffer_size' to get
     a faster full join when adding indexes is not possible. One join
     buffer is allocated for each full join between two tables. For a
     complex join between several tables for which indexes are not
     used, multiple join buffers might be necessary. There is no gain
     from setting the buffer larger than required to hold each matching
     row, and all joins allocate at least the minimum size, so use
     caution in setting this variable to a large value globally. It is
     better to keep the global setting small and change to a larger
     setting only in sessions that are doing large joins. Memory
     allocation time can cause substantial performance drops if the
     global size is larger than needed by most queries that use it.

     The maximum permissible setting for `join_buffer_size' is 4GB.
     Values larger than 4GB are permitted for 64-bit platforms (except
     64-bit Windows, for which large values are truncated to 4GB with a
     warning).

     Prior to MySQL 5.5.3, the minimum allowed value for this variable
     was 8200 for 32-bit platforms and 8228 for 64-bit platforms. In
     MySQL 5.5.3 and later, the minimum is 128 for all platforms.

     For additional information about join buffering, see *Note
     nested-loop-joins::.

   *  `keep_files_on_create'

     Options for keep_files_on_create

     *Command-Line        `--keep_files_on_create=#'        
     Format*                              
     *Option-File Format* `keep_files_on_create'        
     *System Variable     `keep_files_on_create'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     If a `MyISAM' table is created with no `DATA DIRECTORY' option, the
     `.MYD' file is created in the database directory. By default, if
     `MyISAM' finds an existing `.MYD' file in this case, it overwrites
     it. The same applies to `.MYI' files for tables created with no
     `INDEX DIRECTORY' option. To suppress this behavior, set the
     `keep_files_on_create' variable to `ON' (1), in which case
     `MyISAM' will not overwrite existing files and returns an error
     instead. The default value is `OFF' (0).

     If a `MyISAM' table is created with a `DATA DIRECTORY' or `INDEX
     DIRECTORY' option and an existing `.MYD' or `.MYI' file is found,
     MyISAM always returns an error. It will not overwrite a file in
     the specified directory.

   *  `key_buffer_size'

     Options for key_buffer_size

     *Command-Line        `--key_buffer_size=#'        
     Format*                              
     *Option-File Format* `key_buffer_size'        
     *System Variable     `key_buffer_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `8388608'        
     *Range*              `8 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `8388608'        
     *Range*              `8 ..           
                          OS_PER_PROCESS_LIMIT'        

     Index blocks for `MyISAM' tables are buffered and are shared by
     all threads.  `key_buffer_size' is the size of the buffer used for
     index blocks. The key buffer is also known as the key cache.

     The maximum permissible setting for `key_buffer_size' is 4GB on
     32-bit platforms. Values larger than 4GB are permitted for 64-bit
     platforms. The effective maximum size might be less, depending on
     your available physical RAM and per-process RAM limits imposed by
     your operating system or hardware platform.  The value of this
     variable indicates the amount of memory requested. Internally, the
     server allocates as much memory as possible up to this amount, but
     the actual allocation might be less.

     You can increase the value to get better index handling for all
     reads and multiple writes; on a system whose primary function is
     to run MySQL using the *Note `MyISAM': myisam-storage-engine.
     storage engine, 25% of the machine's total memory is an acceptable
     value for this variable. However, you should be aware that, if you
     make the value too large (for example, more than 50% of the
     machine's total memory), your system might start to page and
     become extremely slow. This is because MySQL relies on the
     operating system to perform file system caching for data reads, so
     you must leave some room for the file system cache.  You should
     also consider the memory requirements of any other storage engines
     that you may be using in addition to *Note `MyISAM':
     myisam-storage-engine.

     For even more speed when writing many rows at the same time, use
     *Note `LOCK TABLES': lock-tables. See *Note insert-speed::.

     You can check the performance of the key buffer by issuing a *Note
     `SHOW STATUS': show-status. statement and examining the
     `Key_read_requests', `Key_reads', `Key_write_requests', and
     `Key_writes' status variables.  (See *Note show::.) The
     `Key_reads/Key_read_requests' ratio should normally be less than
     0.01. The `Key_writes/Key_write_requests' ratio is usually near 1
     if you are using mostly updates and deletes, but might be much
     smaller if you tend to do updates that affect many rows at the
     same time or if you are using the `DELAY_KEY_WRITE' table option.

     The fraction of the key buffer in use can be determined using
     `key_buffer_size' in conjunction with the `Key_blocks_unused'
     status variable and the buffer block size, which is available from
     the `key_cache_block_size' system variable:

          1 - ((Key_blocks_unused * key_cache_block_size) / key_buffer_size)

     This value is an approximation because some space in the key
     buffer is allocated internally for administrative structures.
     Factors that influence the amount of overhead for these structures
     include block size and pointer size. As block size increases, the
     percentage of the key buffer lost to overhead tends to decrease.
     Larger blocks results in a smaller number of read operations
     (because more keys are obtained per read), but conversely an
     increase in reads of keys that are not examined (if not all keys
     in a block are relevant to a query).

     It is possible to create multiple `MyISAM' key caches. The size
     limit of 4GB applies to each cache individually, not as a group.
     See *Note myisam-key-cache::.

   *  `key_cache_age_threshold'

     Options for key_cache_age_threshold

     *Command-Line        `--key_cache_age_threshold=#'        
     Format*                              
     *Option-File Format* `key_cache_age_threshold'        
     *System Variable     `key_cache_age_threshold'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `300'           
     *Range*              `100            
                          ..              
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `300'           
     *Range*              `100            
                          ..              
                          18446744073709547520'        

     This value controls the demotion of buffers from the hot sublist
     of a key cache to the warm sublist. Lower values cause demotion to
     happen more quickly. The minimum value is 100. The default value
     is 300. See *Note myisam-key-cache::.

   *  `key_cache_block_size'

     Options for key_cache_block_size

     *Command-Line        `--key_cache_block_size=#'        
     Format*                              
     *Option-File Format* `key_cache_block_size'        
     *System Variable     `key_cache_block_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1024'          
     *Range*              `512            
                          ..              
                          16384'          

     The size in bytes of blocks in the key cache. The default value is
     1024. See *Note myisam-key-cache::.

   *  `key_cache_division_limit'

     Options for key_cache_division_limit

     *Command-Line        `--key_cache_division_limit=#'        
     Format*                              
     *Option-File Format* `key_cache_division_limit'        
     *System Variable     `key_cache_division_limit'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `100'           
     *Range*              `1 ..           
                          100'            

     The division point between the hot and warm sublists of the key
     cache buffer list. The value is the percentage of the buffer list
     to use for the warm sublist. Permissible values range from 1 to
     100. The default value is 100. See *Note myisam-key-cache::.

   *  `language'

     Options for language

     *Deprecated*         5.5.0,          
                          by              
                          lc-messages-dir        
     *Command-Line        `--language=name'        
     Format*                              
                          `-L'            
     *Option-File Format* `language'        
     *System Variable     `language'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `directory        
                          name'           
     *Default*            `/usr/local/mysql/share/mysql/english/'        

     The directory where error messages are located. See *Note
     error-message-language::.

     The `language' system variable is removed as of MySQL 5.5.0
     (although the `--language' command-line option can still be used).
     Similar information is available from the `lc_messages_dir' and
     `lc_messages' variables.

   *  `large_files_support'

     Options for large_files_support

     *System Variable     `large_files_support'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              

     Whether *Note `mysqld': mysqld. was compiled with options for
     large file support.

   *  `large_pages'

     Options for large-pages

     *Command-Line        `--large-pages'        
     Format*                              
     *Option-File Format* `large-pages'        
     *System Variable     `large_pages'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
     *Platform Specific*  linux           
                          *Permitted        
                          Values*         
     *Type* (linux)       `boolean'        
     *Default*            `FALSE'         

     Whether large page support is enabled (via the `--large-pages'
     option). See *Note large-page-support::.

   *  `large_page_size'

     Options for large_page_size

     *System Variable     `large_page_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type* (linux)       `numeric'        
     *Default*            `0'             

     If large page support is enabled, this shows the size of memory
     pages. Currently, large memory pages are supported only on Linux;
     on other platforms, the value of this variable is always 0. See
     *Note large-page-support::.

   *  `last_insert_id'

     The value to be returned from `LAST_INSERT_ID()'. This is stored
     in the binary log when you use `LAST_INSERT_ID()' in a statement
     that updates a table. Setting this variable does not update the
     value returned by the *Note `mysql_insert_id()': mysql-insert-id.
     C API function.

   *  `lc_messages'

     Options for lc-messages

     *Command-Line        `--lc-messages=name'        
     Format*                              
     *Option-File Format* `lc-messages'        
     *System Variable     `lc_messages'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The locale to use for error messages. The server converts the
     value to a language name and combines it with the value of the
     `lc_messages_dir' to produce the location for the error message
     file. See *Note error-message-language::.

   *  `lc_messages_dir'

     Options for lc-messages-dir

     *Command-Line        `--lc-messages-dir=path'        
     Format*                              
     *Option-File Format* `lc-messages-dir'        
     *System Variable     `lc_messages_dir'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `directory        
                          name'           

     The directory where error messages are located. The value is used
     together with the value of `lc_messages' to produce the location
     for the error message file. See *Note error-message-language::.

   *  `lc_time_names'

     Options for lc_time_names

     *System Variable     `lc_time_names'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        

     This variable specifies the locale that controls the language used
     to display day and month names and abbreviations. This variable
     affects the output from the `DATE_FORMAT()', `DAYNAME()' and
     `MONTHNAME()' functions. Locale names are POSIX-style values such
     as `'ja_JP'' or `'pt_BR''. The default value is `'en_US''
     regardless of your system's locale setting. For further
     information, see *Note locale-support::.

   *  `license'

     Options for license

     *System Variable     `license'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `GPL'           

     The type of license the server has.

   *  `local_infile'

     Options for local_infile

     *System Variable     `local_infile'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        

     Whether `LOCAL' is supported for *Note `LOAD DATA INFILE':
     load-data. statements. If this variable is disabled, clients
     cannot use `LOCAL' in *Note `LOAD DATA': load-data. statements. See
     *Note load-data-local::.

   *  `lock_wait_timeout'

     Options for lock_wait_timeout

     *Introduced*         5.5.3           
     *Command-Line        `--lock_wait_timeout=#'        
     Format*                              
     *Option-File Format* `lock_wait_timeout'        
     *System Variable     `lock_wait_timeout'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `31536000'        
     *Range*              `1 ..           
                          31536000'        

     This variable specifies the timeout in seconds for attempts to
     acquire metadata locks. The permissible values range from 1 to
     31536000 (1 year). The default is 31536000.

     This timeout applies to all statements that use metadata locks.
     These include DML and DDL operations on tables, views, stored
     procedures, and stored functions, as well as *Note `LOCK TABLES':
     lock-tables, *Note `FLUSH TABLES WITH READ LOCK': flush, and *Note
     `HANDLER': handler.  statements.

     This timeout does not apply to implicit accesses to system tables
     in the `mysql' database, such as grant tables modified by *Note
     `GRANT': grant. or *Note `REVOKE': revoke. statements or table
     logging statements. The timeout does apply to system tables
     accessed directly, such as with *Note `SELECT': select. or *Note
     `UPDATE': update.

     The timeout value applies separately for each metadata lock
     attempt. A given statement can require more than one lock, so it
     is possible for the statement to block for longer than the
     `lock_wait_timeout' value before reporting a timeout error. When
     lock timeout occurs, `ER_LOCK_WAIT_TIMEOUT' is reported.

     `lock_wait_timeout' does not apply to delayed inserts, which
     always execute with a timeout of 1 year. This is done to avoid
     unnecessary timeouts because a session that issues a delayed
     insert receives no notification of delayed insert timeouts.

     This variable was added in MySQL 5.5.3.

   *  `locked_in_memory'

     Options for locked_in_memory

     *System Variable     `locked_in_memory'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              

     Whether *Note `mysqld': mysqld. was locked in memory with
     `--memlock'.

   *  `log'

     Options for log

     *Deprecated*         5.1.29,         
                          by              
                          general-log        
     *Command-Line        `--log[=name]'        
     Format*                              
                          `-l'            
     *Option-File Format* `log'           
     *System Variable     `log'           
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `OFF'           

     Whether logging of all statements to the general query log is
     enabled. See *Note query-log::.

     This variable is deprecated and is removed in MySQL 5.6. Use
     `general_log' instead.

   *  `log_bin_trust_function_creators'

     Options for log-bin-trust-function-creators

     *Command-Line        `--log-bin-trust-function-creators'        
     Format*                              
     *Option-File Format* `log-bin-trust-function-creators'        
     *System Variable     `log_bin_trust_function_creators'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     This variable applies when binary logging is enabled. It controls
     whether stored function creators can be trusted not to create
     stored functions that will cause unsafe events to be written to
     the binary log. If set to 0 (the default), users are not permitted
     to create or alter stored functions unless they have the `SUPER'
     privilege in addition to the `CREATE ROUTINE' or `ALTER ROUTINE'
     privilege. A setting of 0 also enforces the restriction that a
     function must be declared with the `DETERMINISTIC' characteristic,
     or with the `READS SQL DATA' or `NO SQL' characteristic. If the
     variable is set to 1, MySQL does not enforce these restrictions on
     stored function creation. This variable also applies to trigger
     creation. See *Note stored-programs-logging::.

   *  `log_error'

     Options for log-error

     *Command-Line        `--log-error[=name]'        
     Format*                              
     *Option-File Format* `log-error'        
     *System Variable     `log_error'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The location of the error log, or empty if the server is writing
     error message to the standard error output. See *Note error-log::.

   *  `log_output'

     Options for log-output

     *Command-Line        `--log-output=name'        
     Format*                              
     *Option-File Format* `log-output'        
     *System Variable     `log_output'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `set'           
     *Default*            `FILE'          
     *Valid Values*       `TABLE'         
     `FILE'                               
     `NONE'                               

     The destination for general query log and slow query log output.
     The value can be a comma-separated list of one or more of the
     words `TABLE' (log to tables), `FILE' (log to files), or `NONE'
     (do not log to tables or files). The default value is `FILE'.
     `NONE', if present, takes precedence over any other specifiers. If
     the value is `NONE' log entries are not written even if the logs
     are enabled. If the logs are not enabled, no logging occurs even
     if the value of `log_output' is not `NONE'. For more information,
     see *Note log-destinations::.

   *  `log_queries_not_using_indexes'

     Options for log-queries-not-using-indexes

     *Command-Line        `--log-queries-not-using-indexes'        
     Format*                              
     *Option-File Format* `log-queries-not-using-indexes'        
     *System Variable     `log_queries_not_using_indexes'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Whether queries that do not use indexes are logged to the slow
     query log. See *Note slow-query-log::.

   *  `log_slow_queries'

     Options for log-slow-queries

     *Deprecated*         5.1.29,         
                          by              
                          slow-query-log        
     *Command-Line        `--log-slow-queries[=name]'        
     Format*                              
     *Option-File Format* `log-slow-queries'        
     *System Variable     `log_slow_queries'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        

     Whether slow queries should be logged. `Slow' is determined by the
     value of the `long_query_time' variable. See *Note
     slow-query-log::.

     This variable is deprecated and is removed in MySQL 5.6. Use
     `slow_query_log' instead.

   *  `log_warnings'

     Options for log-warnings

     *Command-Line        `--log-warnings[=#]'        
     Format*                              
                          `-W             
                          [#]'            
     *Option-File Format* `log-warnings[=#]'        
     *System Variable     `log_warnings'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `1'             
     *Range*              `0 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `1'             
     *Range*              `0 ..           
                          18446744073709547520'        

     Whether to produce additional warning messages to the error log.
     This variable is enabled (1) by default and can be disabled by
     setting it to 0. The server logs messages about statements that
     are unsafe for statement-based logging if the value is greater
     than 0. Aborted connections and access-denied errors for new
     connection attempts are logged if the value is greater than 1.

   *  `long_query_time'

     Options for long_query_time

     *Command-Line        `--long_query_time=#'        
     Format*                              
     *Option-File Format* `long_query_time'        
     *System Variable     `long_query_time'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `10'            
     *Min Value*          `0'             

     If a query takes longer than this many seconds, the server
     increments the `Slow_queries' status variable. If the slow query
     log is enabled, the query is logged to the slow query log file.
     This value is measured in real time, not CPU time, so a query that
     is under the threshold on a lightly loaded system might be above
     the threshold on a heavily loaded one. The minimum and default
     values of `long_query_time' are 0 and 10, respectively. The value
     can be specified to a resolution of microseconds. For logging to a
     file, times are written including the microseconds part. For
     logging to tables, only integer times are written; the
     microseconds part is ignored. See *Note slow-query-log::.

   *  `low_priority_updates'

     Options for low-priority-updates

     *Command-Line        `--low-priority-updates'        
     Format*                              
     *Option-File Format* `low-priority-updates'        
     *System Variable     `low_priority_updates'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     If set to `1', all *Note `INSERT': insert, *Note `UPDATE': update,
     *Note `DELETE': delete, and `LOCK TABLE WRITE' statements wait
     until there is no pending *Note `SELECT': select. or `LOCK TABLE
     READ' on the affected table. This affects only storage engines
     that use only table-level locking (such as `MyISAM', `MEMORY', and
     `MERGE'). This variable previously was named
     `sql_low_priority_updates'.

   *  `lower_case_file_system'

     Options for lower_case_file_system

     *System Variable     `lower_case_file_system'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        

     This variable describes the case sensitivity of file names on the
     file system where the data directory is located.  `OFF' means file
     names are case sensitive, `ON' means they are not case sensitive.
     This variable is read only because it reflects a file system
     attribute and setting it would have no effect on the file system.

   *  `lower_case_table_names'

     Options for lower_case_table_names

     *Command-Line        `--lower_case_table_names[=#]'        
     Format*                              
     *Option-File Format* `lower_case_table_names'        
     *System Variable     `lower_case_table_names'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          2'              

     If set to 0, table names are stored as specified and comparisons
     are case sensitive. If set to 1, table names are stored in
     lowercase on disk and comparisons are not case sensitive. If set
     to 2, table names are stored as given but compared in lowercase.
     This option also applies to database names and table aliases. For
     additional information, see *Note identifier-case-sensitivity::.

     You should _not_ set this variable to 0 if you are running MySQL
     on a system that has case-insensitive file names (such as Windows
     or Mac OS X). If you set this variable to 0 on such a system and
     access `MyISAM' tablenames using different lettercases, index
     corruption may result. On Windows the default value is 1. On Mac
     OS X, the default value is 2.

     If you are using `InnoDB' tables, you should set this variable to
     1 on all platforms to force names to be converted to lowercase.

     The setting of this variable has no effect on replication
     filtering options. This is a known issue which is fixed in MySQL
     5.6. See *Note replication-rules::, for more information.

     You should not use different settings for `lower_case_table_names'
     on replication masters and slaves. In particular, you should not
     do this when the slave uses a case-sensitive file system, as this
     can cause replication to fail. This is a known issue which is
     fixed in MySQL 5.6. For more information, see *Note
     replication-features-variables::.

   *  `max_allowed_packet'

     Options for max_allowed_packet

     *Command-Line        `--max_allowed_packet=#'        
     Format*                              
     *Option-File Format* `max_allowed_packet'        
     *System Variable     `max_allowed_packet'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1048576'        
     *Range*              `1024           
                          ..              
                          1073741824'        

     The maximum size of one packet or any generated/intermediate
     string.

     The packet message buffer is initialized to `net_buffer_length'
     bytes, but can grow up to `max_allowed_packet' bytes when needed.
     This value by default is small, to catch large (possibly
     incorrect) packets.

     You must increase this value if you are using large *Note `BLOB':
     blob. columns or long strings.  It should be as big as the largest
     *Note `BLOB': blob. you want to use. The protocol limit for
     `max_allowed_packet' is 1GB.  The value should be a multiple of
     1024; nonmultiples are rounded down to the nearest multiple.

     When you change the message buffer size by changing the value of
     the `max_allowed_packet' variable, you should also change the
     buffer size on the client side if your client program permits it.
     The default `max_allowed_packet' value built in to the client
     library is 1GB, but individual client programs might override
     this. For example, *Note `mysql': mysql. and *Note `mysqldump':
     mysqldump. have defaults of 16MB and 24MB, respectively. They also
     enable you to change the client-side value by setting
     `max_allowed_packet' on the command line or in an option file.

     The session value of this variable is read only.

   *  `max_connect_errors'

     Options for max_connect_errors

     *Command-Line        `--max_connect_errors=#'        
     Format*                              
     *Option-File Format* `max_connect_errors'        
     *System Variable     `max_connect_errors'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `10'            
     *Range*              `1 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `10'            
     *Range*              `1 ..           
                          18446744073709547520'        

     If more than this many successive connection requests from a host
     are interrupted without a successful connection, the server blocks
     that host from further connections. You can unblock blocked hosts
     by flushing the host cache. To do so, issue a *Note `FLUSH HOSTS':
     flush. statement or execute a *Note `mysqladmin flush-hosts':
     mysqladmin. command. If a connection is established successfully
     within fewer than `max_connect_errors' attempts after a previous
     connection was interrupted, the error count for the host is
     cleared to zero. However, once a host is blocked, flushing the
     host cache is the only way to unblock it.

   *  `max_connections'

     Options for max_connections

     *Command-Line        `--max_connections=#'        
     Format*                              
     *Option-File Format* `max_connections'        
     *System Variable     `max_connections'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `151'           
     *Range*              `1 ..           
                          100000'         

     The maximum permitted number of simultaneous client connections.
     By default, this is 151. See *Note too-many-connections::, for
     more information.

     Increasing this value increases the number of file descriptors
     that *Note `mysqld': mysqld. requires. See *Note table-cache::,
     for comments on file descriptor limits.

   *  `max_delayed_threads'

     Options for max_delayed_threads

     *Command-Line        `--max_delayed_threads=#'        
     Format*                              
     *Option-File Format* `max_delayed_threads'        
     *System Variable     `max_delayed_threads'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `20'            
     *Range*              `0 ..           
                          16384'          

     Do not start more than this number of threads to handle *Note
     `INSERT DELAYED': insert-delayed. statements. If you try to insert
     data into a new table after all *Note `INSERT DELAYED':
     insert-delayed. threads are in use, the row is inserted as if the
     `DELAYED' attribute was not specified. If you set this to 0, MySQL
     never creates a thread to handle `DELAYED' rows; in effect, this
     disables `DELAYED' entirely.

     For the `SESSION' value of this variable, the only valid values
     are 0 or the `GLOBAL' value.

   *  `max_error_count'

     Options for max_error_count

     *Command-Line        `--max_error_count=#'        
     Format*                              
     *Option-File Format* `max_error_count'        
     *System Variable     `max_error_count'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `64'            
     *Range*              `0 ..           
                          65535'          

     The maximum number of error, warning, and note messages to be
     stored for display by the *Note `SHOW ERRORS': show-errors. and
     *Note `SHOW WARNINGS': show-warnings. statements.

   *  `max_heap_table_size'

     Options for max_heap_table_size

     *Command-Line        `--max_heap_table_size=#'        
     Format*                              
     *Option-File Format* `max_heap_table_size'        
     *System Variable     `max_heap_table_size'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `16777216'        
     *Range*              `16384          
                          ..              
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `16777216'        
     *Range*              `16384          
                          ..              
                          1844674407370954752'        

     This variable sets the maximum size to which user-created `MEMORY'
     tables are permitted to grow. The value of the variable is used to
     calculate `MEMORY' table `MAX_ROWS' values. Setting this variable
     has no effect on any existing `MEMORY' table, unless the table is
     re-created with a statement such as *Note `CREATE TABLE':
     create-table. or altered with *Note `ALTER TABLE': alter-table. or
     *Note `TRUNCATE TABLE': truncate-table. A server restart also sets
     the maximum size of existing `MEMORY' tables to the global
     `max_heap_table_size' value.

     This variable is also used in conjunction with `tmp_table_size' to
     limit the size of internal in-memory tables. See *Note
     internal-temporary-tables::.

     `max_heap_table_size' is not replicated. See *Note
     replication-features-memory::, and *Note
     replication-features-variables::, for more information.

   *  `max_insert_delayed_threads'

     Options for max_insert_delayed_threads

     *System Variable     `max_insert_delayed_threads'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        

     This variable is a synonym for `max_delayed_threads'.

   *  `max_join_size'

     Options for max_join_size

     *Command-Line        `--max_join_size=#'        
     Format*                              
     *Option-File Format* `max_join_size'        
     *System Variable     `max_join_size'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `18446744073709551615'        
     *Range*              `1 ..           
                          18446744073709551615'        

     Do not permit statements that probably need to examine more than
     `max_join_size' rows (for single-table statements) or row
     combinations (for multiple-table statements) or that are likely to
     do more than `max_join_size' disk seeks. By setting this value,
     you can catch statements where keys are not used properly and that
     would probably take a long time.  Set it if your users tend to
     perform joins that lack a `WHERE' clause, that take a long time, or
     that return millions of rows.

     Setting this variable to a value other than `DEFAULT' resets the
     value of `sql_big_selects' to `0'. If you set the
     `sql_big_selects' value again, the `max_join_size' variable is
     ignored.

     If a query result is in the query cache, no result size check is
     performed, because the result has previously been computed and it
     does not burden the server to send it to the client.

     This variable previously was named `sql_max_join_size'.

   *  `max_length_for_sort_data'

     Options for max_length_for_sort_data

     *Command-Line        `--max_length_for_sort_data=#'        
     Format*                              
     *Option-File Format* `max_length_for_sort_data'        
     *System Variable     `max_length_for_sort_data'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1024'          
     *Range*              `4 ..           
                          8388608'        

     The cutoff on the size of index values that determines which
     `filesort' algorithm to use. See *Note order-by-optimization::.

   *  `max_long_data_size'

     Options for max_long_data_size

     *Introduced*         5.5.11          
     *Deprecated*         5.5.11          
     *Command-Line        `--max_long_data_size=#'        
     Format*                              
     *Option-File Format* `max_long_data_size'        
     *System Variable     `max_long_data_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1048576'        
     *Range*              `1024           
                          ..              
                          4294967295'        

     The maximum size of parameter values that can be sent with the
     *Note `mysql_stmt_send_long_data()': mysql-stmt-send-long-data. C
     API function. If not set at server startup, the default is the
     value of the `max_allowed_packet' system variable. This variable
     is deprecated. In MySQL 5.6, it is removed and the maximum
     parameter size is controlled by `max_allowed_packet'.

   *  `max_prepared_stmt_count'

     Options for max_prepared_stmt_count

     *Command-Line        `--max_prepared_stmt_count=#'        
     Format*                              
     *Option-File Format* `max_prepared_stmt_count'        
     *System Variable     `max_prepared_stmt_count'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `16382'         
     *Range*              `0 ..           
                          1048576'        

     This variable limits the total number of prepared statements in
     the server. (The sum of the number of prepared statements across
     all sessions.) It can be used in environments where there is the
     potential for denial-of-service attacks based on running the
     server out of memory by preparing huge numbers of statements. If
     the value is set lower than the current number of prepared
     statements, existing statements are not affected and can be used,
     but no new statements can be prepared until the current number
     drops below the limit. The default value is 16,382. The
     permissible range of values is from 0 to 1 million. Setting the
     value to 0 disables prepared statements.

   *  `max_relay_log_size'

     Options for max_relay_log_size

     *Command-Line        `--max_relay_log_size=#'        
     Format*                              
     *Option-File Format* `max_relay_log_size'        
     *System Variable     `max_relay_log_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          1073741824'        

     If a write by a replication slave to its relay log causes the
     current log file size to exceed the value of this variable, the
     slave rotates the relay logs (closes the current file and opens
     the next one). If `max_relay_log_size' is 0, the server uses
     `max_binlog_size' for both the binary log and the relay log. If
     `max_relay_log_size' is greater than 0, it constrains the size of
     the relay log, which enables you to have different sizes for the
     two logs. You must set `max_relay_log_size' to between 4096 bytes
     and 1GB (inclusive), or to 0. The default value is 0. See *Note
     replication-implementation-details::.

   *  `max_seeks_for_key'

     Options for max_seeks_for_key

     *Command-Line        `--max_seeks_for_key=#'        
     Format*                              
     *Option-File Format* `max_seeks_for_key'        
     *System Variable     `max_seeks_for_key'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `4294967295'        
     *Range*              `1 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `18446744073709547520'        
     *Range*              `1 ..           
                          18446744073709547520'        

     Limit the assumed maximum number of seeks when looking up rows
     based on a key. The MySQL optimizer assumes that no more than this
     number of key seeks are required when searching for matching rows
     in a table by scanning an index, regardless of the actual
     cardinality of the index (see *Note show-index::). By setting this
     to a low value (say, 100), you can force MySQL to prefer indexes
     instead of table scans.

   *  `max_sort_length'

     Options for max_sort_length

     *Command-Line        `--max_sort_length=#'        
     Format*                              
     *Option-File Format* `max_sort_length'        
     *System Variable     `max_sort_length'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1024'          
     *Range*              `4 ..           
                          8388608'        

     The number of bytes to use when sorting data values. Only the
     first `max_sort_length' bytes of each value are used; the rest are
     ignored.

   *  `max_sp_recursion_depth'

     Options for max_sp_recursion_depth

     *Command-Line        `--max_sp_recursion_depth[=#]'        
     Format*                              
     *Option-File Format* `max_sp_recursion_depth'        
     *System Variable     `max_sp_recursion_depth'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Max Value*          `255'           

     The number of times that any given stored procedure may be called
     recursively. The default value for this option is 0, which
     completely disables recursion in stored procedures. The maximum
     value is 255.

     Stored procedure recursion increases the demand on thread stack
     space. If you increase the value of `max_sp_recursion_depth', it
     may be necessary to increase thread stack size by increasing the
     value of `thread_stack' at server startup.

   *  `max_tmp_tables'

     This variable is unused.

   *  `max_user_connections'

     Options for max_user_connections

     *Command-Line        `--max_user_connections=#'        
     Format*                              
     *Option-File Format* `max_user_connections'        
     *System Variable     `max_user_connections'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          4294967295'        

     The maximum number of simultaneous connections permitted to any
     given MySQL user account. A value of 0 (the default) means `no
     limit.'

     This variable has a global value that can be set at server startup
     or runtime. It also has a read-only session value that indicates
     the effective simultaneous-connection limit that applies to the
     account associated with the current session.  The session value is
     initialized as follows:

        * If the user account has a nonzero `MAX_USER_CONNECTIONS'
          resource limit, the session `max_user_connections' value is
          set to that limit.

        * Otherwise, the session `max_user_connections' value is set to
          the global value.

     Account resource limits are specified using the *Note `GRANT':
     grant. statement. See *Note user-resources::, and *Note grant::.

   *  `max_write_lock_count'

     Options for max_write_lock_count

     *Command-Line        `--max_write_lock_count=#'        
     Format*                              
     *Option-File Format* `max_write_lock_count'        
     *System Variable     `max_write_lock_count'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `4294967295'        
     *Range*              `1 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `18446744073709547520'        
     *Range*              `1 ..           
                          18446744073709547520'        

     After this many write locks, permit some pending read lock
     requests to be processed in between.

   *  `metadata_locks_cache_size'

     Options for metadata_locks_cache_size

     *Introduced*         5.5.19          
     *System Variable     `metadata_locks_cache_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1024'          
     *Range*              `1 ..           
                          1048576'        

     The size of the metadata locks cache. The server uses this cache
     to avoid creation and destruction of synchronization objects. This
     is particularly helpful on systems where such operations are
     expensive, such as Windows XP. This variable was added in MySQL
     5.5.19.

   *  `min_examined_row_limit'

     Options for min-examined-row-limit

     *Command-Line        `--min-examined-row-limit=#'        
     Format*                              
     *Option-File Format* `min-examined-row-limit'        
     *System Variable     `min_examined_row_limit'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          18446744073709547520'        

     Queries that examine fewer than this number of rows are not logged
     to the slow query log.

   *  `myisam_data_pointer_size'

     Options for myisam_data_pointer_size

     *Command-Line        `--myisam_data_pointer_size=#'        
     Format*                              
     *Option-File Format* `myisam_data_pointer_size'        
     *System Variable     `myisam_data_pointer_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `6'             
     *Range*              `2 ..           
                          7'              

     The default pointer size in bytes, to be used by *Note `CREATE
     TABLE': create-table. for `MyISAM' tables when no `MAX_ROWS'
     option is specified. This variable cannot be less than 2 or larger
     than 7. The default value is 6. See *Note full-table::.

   *  `myisam_max_sort_file_size'

     Options for myisam_max_sort_file_size

     *Command-Line        `--myisam_max_sort_file_size=#'        
     Format*                              
     *Option-File Format* `myisam_max_sort_file_size'        
     *System Variable     `myisam_max_sort_file_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `2147483648'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `9223372036854775807'        

     The maximum size of the temporary file that MySQL is permitted to
     use while re-creating a `MyISAM' index (during *Note `REPAIR
     TABLE': repair-table, *Note `ALTER TABLE': alter-table, or *Note
     `LOAD DATA INFILE': load-data.). If the file size would be larger
     than this value, the index is created using the key cache instead,
     which is slower. The value is given in bytes.

     The default value is 2GB. If `MyISAM' index files exceed this size
     and disk space is available, increasing the value may help
     performance. The space must be available in the file system
     containing the directory where the original index file is located.

   *  `myisam_mmap_size'

     Options for myisam_mmap_size

     *Introduced*         5.5.1           
     *Command-Line        `--myisam_mmap_size=#'        
     Format*                              
     *Option-File Format* `myisam_mmap_size'        
     *System Variable     `myisam_mmap_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `4294967295'        
     *Range*              `7 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `18446744073709547520'        
     *Range*              `7 ..           
                          18446744073709547520'        

     The maximum amount of memory to use for memory mapping compressed
     *Note `MyISAM': myisam-storage-engine. files. If many compressed
     `MyISAM' tables are used, the value can be decreased to reduce the
     likelihood of memory-swapping problems. This variable was added in
     MySQL 5.5.1.

   *  `myisam_recover_options'

     Options for myisam_recover_options

     *System Variable     `myisam_recover_options'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              

     The value of the `--myisam-recover-options' option. See *Note
     server-options::.

   *  `myisam_repair_threads'

     Options for myisam_repair_threads

     *Command-Line        `--myisam_repair_threads=#'        
     Format*                              
     *Option-File Format* `myisam_repair_threads'        
     *System Variable     `myisam_repair_threads'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `1'             
     *Range*              `1 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `1'             
     *Range*              `1 ..           
                          18446744073709547520'        

     If this value is greater than 1, `MyISAM' table indexes are
     created in parallel (each index in its own thread) during the
     `Repair by sorting' process. The default value is 1.

     *Note*:

     Multi-threaded repair is still _beta-quality_ code.

   *  `myisam_sort_buffer_size'

     Options for myisam_sort_buffer_size

     *Command-Line        `--myisam_sort_buffer_size=#'        
     Format*                              
     *Option-File Format* `myisam_sort_buffer_size'        
     *System Variable     `myisam_sort_buffer_size'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `8388608'        
     *Range*              `4096           
                          ..              
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `8388608'        
     *Range*              `4096           
                          ..              
                          18446744073709547520'        

     The size of the buffer that is allocated when sorting `MyISAM'
     indexes during a *Note `REPAIR TABLE': repair-table. or when
     creating indexes with *Note `CREATE INDEX': create-index. or *Note
     `ALTER TABLE': alter-table.

     The maximum permissible setting for `myisam_sort_buffer_size' is
     4GB. Values larger than 4GB are permitted for 64-bit platforms
     (except 64-bit Windows, for which large values are truncated to
     4GB with a warning).

   *  `myisam_stats_method'

     Options for myisam_stats_method

     *Command-Line        `--myisam_stats_method=name'        
     Format*                              
     *Option-File Format* `myisam_stats_method'        
     *System Variable     `myisam_stats_method'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Valid Values*       `nulls_equal'        
     `nulls_unequal'                      
     `nulls_ignored'                      

     How the server treats `NULL' values when collecting statistics
     about the distribution of index values for `MyISAM' tables. This
     variable has three possible values, `nulls_equal',
     `nulls_unequal', and `nulls_ignored'. For `nulls_equal', all `NULL'
     index values are considered equal and form a single value group
     that has a size equal to the number of `NULL' values. For
     `nulls_unequal', `NULL' values are considered unequal, and each
     `NULL' forms a distinct value group of size 1. For `nulls_ignored',
     `NULL' values are ignored.

     The method that is used for generating table statistics influences
     how the optimizer chooses indexes for query execution, as
     described in *Note myisam-index-statistics::.

   *  `myisam_use_mmap'

     Options for myisam_use_mmap

     *Command-Line        `--myisam_use_mmap'        
     Format*                              
     *Option-File Format* `myisam_use_mmap'        
     *System Variable     `myisam_use_mmap'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Use memory mapping for reading and writing `MyISAM' tables.

   *  `named_pipe'

     Options for named_pipe

     *System Variable     `named_pipe'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
     *Platform Specific*  windows         
                          *Permitted        
                          Values*         
     *Type* (windows)     `boolean'        
     *Default*            `OFF'           

     (Windows only.) Indicates whether the server supports connections
     over named pipes.

   *  `net_buffer_length'

     Options for net_buffer_length

     *Command-Line        `--net_buffer_length=#'        
     Format*                              
     *Option-File Format* `net_buffer_length'        
     *System Variable     `net_buffer_length'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `16384'         
     *Range*              `1024           
                          ..              
                          1048576'        

     Each client thread is associated with a connection buffer and
     result buffer. Both begin with a size given by `net_buffer_length'
     but are dynamically enlarged up to `max_allowed_packet' bytes as
     needed. The result buffer shrinks to `net_buffer_length' after each
     SQL statement.

     This variable should not normally be changed, but if you have very
     little memory, you can set it to the expected length of statements
     sent by clients. If statements exceed this length, the connection
     buffer is automatically enlarged. The maximum value to which
     `net_buffer_length' can be set is 1MB.

     The session value of this variable is read only.

   *  `net_read_timeout'

     Options for net_read_timeout

     *Command-Line        `--net_read_timeout=#'        
     Format*                              
     *Option-File Format* `net_read_timeout'        
     *System Variable     `net_read_timeout'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `30'            
     *Min Value*          `1'             

     The number of seconds to wait for more data from a connection
     before aborting the read. When the server is reading from the
     client, `net_read_timeout' is the timeout value controlling when
     to abort. When the server is writing to the client,
     `net_write_timeout' is the timeout value controlling when to
     abort. See also `slave_net_timeout'.

   *  `net_retry_count'

     Options for net_retry_count

     *Command-Line        `--net_retry_count=#'        
     Format*                              
     *Option-File Format* `net_retry_count'        
     *System Variable     `net_retry_count'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `10'            
     *Range*              `1 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `10'            
     *Range*              `1 ..           
                          18446744073709547520'        

     If a read or write on a communication port is interrupted, retry
     this many times before giving up. This value should be set quite
     high on FreeBSD because internal interrupts are sent to all
     threads.

   *  `net_write_timeout'

     Options for net_write_timeout

     *Command-Line        `--net_write_timeout=#'        
     Format*                              
     *Option-File Format* `net_write_timeout'        
     *System Variable     `net_write_timeout'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `60'            
     *Min Value*          `1'             

     The number of seconds to wait for a block to be written to a
     connection before aborting the write. See also `net_read_timeout'.

   *  `new'

     Options for new

     *Command-Line        `--new'         
     Format*                              
                          `-n'            
     *Option-File Format* `new'           
     *System Variable     `new'           
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
     *Disabled by*        `skip-new'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     This variable was used in MySQL 4.0 to turn on some 4.1 behaviors,
     and is retained for backward compatibility. In MySQL 5.5, its
     value is always `OFF'.

   *  `old'

     Options for old

     *Command-Line        `--old'         
     Format*                              
     *Option-File Format* `old'           
     *System Variable     `old'           
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              

     `old' is a compatibility variable. It is disabled by default, but
     can be enabled at startup to revert the server to behaviors
     present in older versions.

     Currently, when `old' is enabled, it changes the default scope of
     index hints to that used prior to MySQL 5.1.17. That is, index
     hints with no `FOR' clause apply only to how indexes are used for
     row retrieval and not to resolution of `ORDER BY' or `GROUP BY'
     clauses. (See *Note index-hints::.) Take care about enabling this
     in a replication setup. With statement-based binary logging,
     having different modes for the master and slaves might lead to
     replication errors.

   *  `old_alter_table'

     Options for old-alter-table

     *Command-Line        `--old-alter-table'        
     Format*                              
     *Option-File Format* `old-alter-table'        
     *System Variable     `old_alter_table'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     When this variable is enabled, the server does not use the
     optimized method of processing an *Note `ALTER TABLE':
     alter-table. operation. It reverts to using a temporary table,
     copying over the data, and then renaming the temporary table to
     the original, as used by MySQL 5.0 and earlier. For more
     information on the operation of *Note `ALTER TABLE': alter-table,
     see *Note alter-table::.

   *  `old_passwords'

     Options for old_passwords

     *System Variable     `old_passwords'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `0'             

     This variable controls the password hashing method used by the
     `PASSWORD()' function and for the `IDENTIFIED BY' clause of the
     *Note `CREATE USER': create-user. and *Note `GRANT': grant.
     statements.

     The following table shows the permitted values of `old_passwords',
     the password hashing method for each value, and which
     authentication plugins use passwords hashed with each method.

     The following table shows the permitted values of `old_passwords',
     the password hashing method for each value, and which
     authentication plugins use passwords hashed with each method.

     Value   Password Hashing  Intended Use
             Format            
     `0' or  MySQL 4.1 native  Accounts that authenticate with the
     `OFF'   hashing           `mysql_native_password' plugin
     `1' or  Pre-4.1 (`old')   Accounts that authenticate with the
     `ON'    hashing           `mysql_old_password' plugin

     If `old_passwords=1', `PASSWORD('STR')' returns the same value as
     `OLD_PASSWORD('STR')'.  The latter function is not affected by the
     value of `old_passwords'.

     For information about authentication plugins and hashing formats,
     see *Note pluggable-authentication::, and *Note password-hashing::.

     *Note*:

     Passwords that use the pre-4.1 hashing method are less secure than
     passwords that use the native password hashing method and should
     be avoided.

   *  `one_shot'

     This is not a variable, but it can be used when setting some
     variables. It is described in *Note set-statement::.

   *  `open_files_limit'

     Options for open-files-limit

     *Command-Line        `--open-files-limit=#'        
     Format*                              
     *Option-File Format* `open-files-limit'        
     *System Variable     `open_files_limit'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          65535'          

     The number of files that the operating system permits *Note
     `mysqld': mysqld. to open. This is the real value permitted by the
     system and might be different from the value you gave using the
     `--open-files-limit' option to *Note `mysqld': mysqld. or *Note
     `mysqld_safe': mysqld-safe.  The value is 0 on systems where MySQL
     cannot change the number of open files.

   *  `optimizer_prune_level'

     Options for optimizer_prune_level

     *Command-Line        `--optimizer_prune_level[=#]'        
     Format*                              
     *Option-File Format* `optimizer_prune_level'        
     *System Variable     `optimizer_prune_level'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `1'             

     Controls the heuristics applied during query optimization to prune
     less-promising partial plans from the optimizer search space. A
     value of 0 disables heuristics so that the optimizer performs an
     exhaustive search. A value of 1 causes the optimizer to prune
     plans based on the number of rows retrieved by intermediate plans.

   *  `optimizer_search_depth'

     Options for optimizer_search_depth

     *Command-Line        `--optimizer_search_depth[=#]'        
     Format*                              
     *Option-File Format* `optimizer_search_depth'        
     *System Variable     `optimizer_search_depth'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `62'            
     *Range*              `0 ..           
                          63'             

     The maximum depth of search performed by the query optimizer.
     Values larger than the number of relations in a query result in
     better query plans, but take longer to generate an execution plan
     for a query. Values smaller than the number of relations in a
     query return an execution plan quicker, but the resulting plan may
     be far from being optimal. If set to 0, the system automatically
     picks a reasonable value. If set to 63, the optimizer switches to
     the algorithm used in MySQL 5.0.0 (and previous versions) for
     performing searches. The value of 63 is deprecated and will be
     treated as invalid in a future MySQL release.

   *  `optimizer_switch'

     Options for optimizer_switch

     *Command-Line        `--optimizer_switch=value'        
     Format*                              
     *Option-File Format* `optimizer_switch'        
     *System Variable     `optimizer_switch'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values          
                          (<=             
                          5.5.2)*         
     *Type*               `set'           
     *Valid Values*       `index_merge={on|off}'        
     `index_merge_intersection={on|off}'                
     `index_merge_sort_union={on|off}'                
     `index_merge_union={on|off}'                
                          *Permitted        
                          Values          
                          (>=             
                          5.5.3)*         
     *Type*               `set'           
     *Valid Values*       `engine_condition_pushdown={on|off}'        
     `index_merge={on|off}'                
     `index_merge_intersection={on|off}'                
     `index_merge_sort_union={on|off}'                
     `index_merge_union={on|off}'                

     The `optimizer_switch' system variable enables control over
     optimizer behavior. The value of this variable is a set of flags,
     each of which has a value of `on' or `off' to indicate whether the
     corresponding optimizer behavior is enabled or disabled. This
     variable has global and session values and can be changed at
     runtime. The global default can be set at server startup.

     To see the current set of optimizer flags, select the variable
     value:

          mysql> SELECT @@optimizer_switch\G
          *************************** 1. row ***************************
          @@optimizer_switch: index_merge=on,index_merge_union=on,
                              index_merge_sort_union=on,
                              index_merge_intersection=on,
                              engine_condition_pushdown=on

     For more information about the syntax of this variable and the
     optimizer behaviors that it controls, see *Note
     switchable-optimizations::.

   * `performance_schema_XXX'

     Performance Schema system variables are listed in *Note
     performance-schema-system-variables::. These variables may be used
     to configure Performance Schema operation.

   *  `pid_file'

     Options for pid-file

     *Command-Line        `--pid-file=file_name'        
     Format*                              
     *Option-File Format* `pid-file'        
     *System Variable     `pid_file'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The path name of the process ID (PID) file. This variable can be
     set with the `--pid-file' option.

   *  `plugin_dir'

     Options for plugin_dir

     *Command-Line        `--plugin_dir=path'        
     Format*                              
     *Option-File Format* `plugin_dir'        
     *System Variable     `plugin_dir'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values          
                          (<=             
                          5.5.4)*         
     *Type* (windows)     `directory        
                          name'           
     *Default*            `BASEDIR/lib/plugin'        
                          *Permitted        
                          Values          
                          (<=             
                          5.5.4)*         
     *Type* (other)       `directory        
                          name'           
     *Default*            `BASEDIR/lib/mysql/plugin'        
                          *Permitted        
                          Values          
                          (>=             
                          5.5.5)*         
     *Type*               `directory        
                          name'           
     *Default*            `BASEDIR/lib/plugin'        

     The path name of the plugin directory.

     If the plugin directory is writable by the server, it may be
     possible for a user to write executable code to a file in the
     directory using *Note `SELECT ... INTO DUMPFILE': select. This can
     be prevented by making `plugin_dir' read only to the server or by
     setting `--secure-file-priv' to a directory where *Note `SELECT':
     select. writes can be made safely.

   *  `port'

     Options for port

     *Command-Line        `--port=#'        
     Format*                              
                          `-P'            
     *Option-File Format* `port'          
     *System Variable     `port'          
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `3306'          
     *Range*              `0 ..           
                          65535'          

     The number of the port on which the server listens for TCP/IP
     connections. This variable can be set with the `--port' option.

   *  `preload_buffer_size'

     Options for preload_buffer_size

     *Command-Line        `--preload_buffer_size=#'        
     Format*                              
     *Option-File Format* `preload_buffer_size'        
     *System Variable     `preload_buffer_size'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `32768'         
     *Range*              `1024           
                          ..              
                          1073741824'        

     The size of the buffer that is allocated when preloading indexes.

   *  `profiling'

     If set to 0 or `OFF' (the default), statement profiling is
     disabled. If set to 1 or `ON', statement profiling is enabled and
     the *Note `SHOW PROFILE': show-profile. and *Note `SHOW PROFILES':
     show-profiles. statements provide access to profiling information.
     See *Note show-profiles::.

   *  `profiling_history_size'

     The number of statements for which to maintain profiling
     information if `profiling' is enabled. The default value is 15.
     The maximum value is 100.  Setting the value to 0 effectively
     disables profiling. See *Note show-profiles::.

   *  `protocol_version'

     Options for protocol_version

     *System Variable     `protocol_version'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        

     The version of the client/server protocol used by the MySQL server.

   *  `proxy_user'

     Options for proxy_user

     *Introduced*         5.5.7           
     *System Variable     `proxy_user'        
     Name*                                
     *Variable Scope*     Session         
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        

     If the current client is a proxy for another user, this variable
     is the proxy user account name. Otherwise, this variable is
     `NULL'. See *Note proxy-users::.

     This variable was added in MySQL 5.5.7.

   *  `pseudo_slave_mode'

     Options for pseudo_slave_mode

     *Introduced*         5.5.30          
     *System Variable     `pseudo_slave_mode'        
     Name*                                
     *Variable Scope*     Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        

     This variable is for internal server use. It was added in MySQL
     5.5.30.

   *  `pseudo_thread_id'

     Options for pseudo_thread_id

     *System Variable     `pseudo_thread_id'        
     Name*                                
     *Variable Scope*     Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        

     This variable is for internal server use.

   *  `query_alloc_block_size'

     Options for query_alloc_block_size

     *Command-Line        `--query_alloc_block_size=#'        
     Format*                              
     *Option-File Format* `query_alloc_block_size'        
     *System Variable     `query_alloc_block_size'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `8192'          
     *Range*              `1024           
                          ..              
                          4294967295'        
     *Block Size*         `1024'          
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `8192'          
     *Range*              `1024           
                          ..              
                          18446744073709547520'        
     *Block Size*         `1024'          

     The allocation size of memory blocks that are allocated for
     objects created during statement parsing and execution. If you
     have problems with memory fragmentation, it might help to increase
     this parameter.

   *  `query_cache_limit'

     Options for query_cache_limit

     *Command-Line        `--query_cache_limit=#'        
     Format*                              
     *Option-File Format* `query_cache_limit'        
     *System Variable     `query_cache_limit'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `1048576'        
     *Range*              `0 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `1048576'        
     *Range*              `0 ..           
                          18446744073709547520'        

     Do not cache results that are larger than this number of bytes.
     The default value is 1MB.

   *  `query_cache_min_res_unit'

     Options for query_cache_min_res_unit

     *Command-Line        `--query_cache_min_res_unit=#'        
     Format*                              
     *Option-File Format* `query_cache_min_res_unit'        
     *System Variable     `query_cache_min_res_unit'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `4096'          
     *Range*              `512            
                          ..              
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `4096'          
     *Range*              `512            
                          ..              
                          18446744073709547520'        

     The minimum size (in bytes) for blocks allocated by the query
     cache. The default value is 4096 (4KB). Tuning information for
     this variable is given in *Note query-cache-configuration::.

   *  `query_cache_size'

     Options for query_cache_size

     *Command-Line        `--query_cache_size=#'        
     Format*                              
     *Option-File Format* `query_cache_size'        
     *System Variable     `query_cache_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          18446744073709547520'        

     The amount of memory allocated for caching query results. The
     default value is 0, which disables the query cache. To reduce
     overhead significantly, you should also start the server with
     `query_cache_type=0' if you will not be using the query cache. The
     permissible values are multiples of 1024; other values are rounded
     down to the nearest multiple. Note that `query_cache_size' bytes of
     memory are allocated even if `query_cache_type' is set to 0.  See
     *Note query-cache-configuration::, for more information.

     The query cache needs a minimum size of about 40KB to allocate its
     structures. (The exact size depends on system architecture.) If
     you set the value of `query_cache_size' too small, a warning will
     occur, as described in *Note query-cache-configuration::.

   *  `query_cache_type'

     Options for query_cache_type

     *Command-Line        `--query_cache_type=#'        
     Format*                              
     *Option-File Format* `query_cache_type'        
     *System Variable     `query_cache_type'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `1'             
     *Valid Values*       `0'             
     `1'                                  
     `2'                                  

     Set the query cache type. Setting the `GLOBAL' value sets the type
     for all clients that connect thereafter. Individual clients can
     set the `SESSION' value to affect their own use of the query
     cache. Possible values are shown in the following table.

     This table describes options that may be specified for the
     `query_cache_type' system variable.

     Option     Description
     `0' or     Do not cache results in or retrieve results
     `OFF'      from the query cache. Note that this does not
                deallocate the query cache buffer.  To do
                that, you should set `query_cache_size' to 0.
     `1' or     Cache all cacheable query results except for
     `ON'       those that begin with `SELECT SQL_NO_CACHE'.
     `2' or     Cache results only for cacheable queries that
     `DEMAND'   begin with `SELECT SQL_CACHE'.

     This variable defaults to `ON'.

     If the server is started with `query_cache_type' set to 0, it does
     not acquire the query cache mutex at all, which means that the
     query cache cannot be enabled at runtime and there is reduced
     overhead in query execution.

   *  `query_cache_wlock_invalidate'

     Options for query_cache_wlock_invalidate

     *Command-Line        `--query_cache_wlock_invalidate'        
     Format*                              
     *Option-File Format* `query_cache_wlock_invalidate'        
     *System Variable     `query_cache_wlock_invalidate'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Normally, when one client acquires a `WRITE' lock on a `MyISAM'
     table, other clients are not blocked from issuing statements that
     read from the table if the query results are present in the query
     cache. Setting this variable to 1 causes acquisition of a `WRITE'
     lock for a table to invalidate any queries in the query cache that
     refer to the table. This forces other clients that attempt to
     access the table to wait while the lock is in effect.

   *  `query_prealloc_size'

     Options for query_prealloc_size

     *Command-Line        `--query_prealloc_size=#'        
     Format*                              
     *Option-File Format* `query_prealloc_size'        
     *System Variable     `query_prealloc_size'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `8192'          
     *Range*              `8192           
                          ..              
                          4294967295'        
     *Block Size*         `1024'          
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `8192'          
     *Range*              `8192           
                          ..              
                          18446744073709547520'        
     *Block Size*         `1024'          

     The size of the persistent buffer used for statement parsing and
     execution. This buffer is not freed between statements. If you are
     running complex queries, a larger `query_prealloc_size' value
     might be helpful in improving performance, because it can reduce
     the need for the server to perform memory allocation during query
     execution operations.

   *  `rand_seed1'

     The `rand_seed1' and `rand_seed2' variables exist as session
     variables only, and can be set but not read. The variables--but
     not their values--are shown in the output of *Note `SHOW
     VARIABLES': show-variables.

     The purpose of these variables is to support replication of the
     `RAND()' function. For statements that invoke `RAND()', the master
     passes two values to the slave, where they are used to seed the
     random number generator. The slave uses these values to set the
     session variables `rand_seed1' and `rand_seed2' so that `RAND()'
     on the slave generates the same value as on the master.

   *  `rand_seed2'

     See the description for `rand_seed1'.

   *  `range_alloc_block_size'

     Options for range_alloc_block_size

     *Command-Line        `--range_alloc_block_size=#'        
     Format*                              
     *Option-File Format* `range_alloc_block_size'        
     *System Variable     `range_alloc_block_size'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `4096'          
     *Range*              `4096           
                          ..              
                          4294967295'        
     *Block Size*         `1024'          
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `4096'          
     *Range*              `4096           
                          ..              
                          18446744073709547520'        
     *Block Size*         `1024'          

     The size of blocks that are allocated when doing range
     optimization.

   *  `read_buffer_size'

     Options for read_buffer_size

     *Command-Line        `--read_buffer_size=#'        
     Format*                              
     *Option-File Format* `read_buffer_size'        
     *System Variable     `read_buffer_size'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `131072'        
     *Range*              `8200           
                          ..              
                          2147479552'        

     Each thread that does a sequential scan for a `MyISAM' table
     allocates a buffer of this size (in bytes) for each table it
     scans. If you do many sequential scans, you might want to increase
     this value, which defaults to 131072. The value of this variable
     should be a multiple of 4KB. If it is set to a value that is not a
     multiple of 4KB, its value will be rounded down to the nearest
     multiple of 4KB.

     This option is also used in the following context for all search
     engines:

        * For caching the indexes in a temporary file (not a temporary
          table), when sorting rows for `ORDER BY'.

        * For bulk insert into partitions.

        * For caching results of nested queries.

     and in one other storage engine-specific way: to determine the
     memory block size for *Note `MEMORY': memory-storage-engine.
     tables.

     The maximum permissible setting for `read_buffer_size' is 2GB.

     For more information about memory use during different operations,
     see *Note memory-use::.

   *  `read_only'

     Options for read_only

     *Command-Line        `--read-only'        
     Format*                              
     *Option-File Format* `read_only'        
     *System Variable     `read_only'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `false'         

     This variable is off by default. When it is enabled, the server
     permits no updates except from users that have the `SUPER'
     privilege or (on a slave server) from updates performed by slave
     threads. In replication setups, it can be useful to enable
     `read_only' on slave servers to ensure that slaves accept updates
     only from the master server and not from clients.

     `read_only' does not apply to `TEMPORARY' tables, nor does it
     prevent the server from inserting rows into the log tables (see
     *Note log-destinations::). This variable does not prevent the use
     of *Note `ANALYZE TABLE': analyze-table. or *Note `OPTIMIZE
     TABLE': optimize-table. statements because its purpose is to
     prevent changes to table structure or contents. Analysis and
     optimization do not qualify as such changes. This means, for
     example, that consistency checks on read-only slaves can be
     performed with *Note `mysqlcheck --all-databases --analyze':
     mysqlcheck.

     `read_only' exists only as a `GLOBAL' variable, so changes to its
     value require the `SUPER' privilege.  Changes to `read_only' on a
     master server are not replicated to slave servers. The value can
     be set on a slave server independent of the setting on the master.

     *Important*:

     In MySQL 5.5, enabling `read_only' prevents the use of the *Note
     `SET PASSWORD': set-password. statement by any user not having the
     `SUPER' privilege. This is not necessarily the case for all MySQL
     release series. When replicating from one MySQL release series to
     another (for example, from a MySQL 5.0 master to a MySQL 5.1 or
     later slave), you should check the documentation for the versions
     running on both master and slave to determine whether the behavior
     of `read_only' in this regard is or is not the same, and, if it is
     different, whether this has an impact on your applications.

     The following conditions apply:

        * If you attempt to enable `read_only' while you have any
          explicit locks (acquired with *Note `LOCK TABLES':
          lock-tables.) or have a pending transaction, an error occurs.

        * If you attempt to enable `read_only' while other clients hold
          explicit table locks or have pending transactions, the
          attempt blocks until the locks are released and the
          transactions end. While the attempt to enable `read_only' is
          pending, requests by other clients for table locks or to
          begin transactions also block until `read_only' has been set.

        * `read_only' can be enabled while you hold a global read lock
          (acquired with *Note `FLUSH TABLES WITH READ LOCK': flush.)
          because that does not involve table locks.

     As of MySQL 5.5.3, attempts to set `read_only' block for active
     transactions that hold metadata locks until those transactions end.

   *  `read_rnd_buffer_size'

     Options for read_rnd_buffer_size

     *Command-Line        `--read_rnd_buffer_size=#'        
     Format*                              
     *Option-File Format* `read_rnd_buffer_size'        
     *System Variable     `read_rnd_buffer_size'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `262144'        
     *Range*              `8200           
                          ..              
                          4294967295'        

     When reading rows from a `MyISAM' table in sorted order following
     a key-sorting operation, the rows are read through this buffer to
     avoid disk seeks. See *Note order-by-optimization::. Setting the
     variable to a large value can improve `ORDER BY' performance by a
     lot. However, this is a buffer allocated for each client, so you
     should not set the global variable to a large value. Instead,
     change the session variable only from within those clients that
     need to run large queries.

     The maximum permissible setting for `read_rnd_buffer_size' is 2GB.

     For more information about memory use during different operations,
     see *Note memory-use::.

   *  `relay_log_purge'

     Options for relay_log_purge

     *Command-Line        `--relay_log_purge'        
     Format*                              
     *Option-File Format* `relay_log_purge'        
     *System Variable     `relay_log_purge'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `TRUE'          

     Disables or enables automatic purging of relay log files as soon
     as they are not needed any more. The default value is 1 (`ON').

   *  `relay_log_space_limit'

     Options for relay_log_space_limit

     *Command-Line        `--relay_log_space_limit=#'        
     Format*                              
     *Option-File Format* `relay_log_space_limit'        
     *System Variable     `relay_log_space_limit'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          18446744073709547520'        

     The maximum amount of space to use for all relay logs.

   *  `report_host'

     Options for report-host

     *Command-Line        `--report-host=host_name'        
     Format*                              
     *Option-File Format* `report-host'        
     *System Variable     `report_host'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The value of the `--report-host' option.

   *  `report_password'

     Options for report-password

     *Command-Line        `--report-password=name'        
     Format*                              
     *Option-File Format* `report-password'        
     *System Variable     `report_password'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The value of the `--report-password' option. Not the same as the
     password used for the MySQL replication user account.

   *  `report_port'

     Options for report-port

     *Command-Line        `--report-port=#'        
     Format*                              
     *Option-File Format* `report-port'        
     *System Variable     `report_port'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values          
                          (>=             
                          5.5.23)*        
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          65535'          

     The value of the `--report-port' option.

   *  `report_user'

     Options for report-user

     *Command-Line        `--report-user=name'        
     Format*                              
     *Option-File Format* `report-user'        
     *System Variable     `report_user'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The value of the `--report-user' option. Not the same as the name
     for the MySQL replication user account.

   *  `rpl_semi_sync_master_enabled'

     Options for rpl_semi_sync_master_enabled

     *System Variable     `rpl_semi_sync_master_enabled'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Controls whether semisynchronous replication is enabled on the
     master. To enable or disable the plugin, set this variable to `ON'
     or `OFF' (or 1 or 0), respectively. The default is `OFF'.

     This variable is available only if the master-side semisynchronous
     replication plugin is installed.

   *  `rpl_semi_sync_master_timeout'

     Options for rpl_semi_sync_master_timeout

     *System Variable     `rpl_semi_sync_master_timeout'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `10000'         

     A value in milliseconds that controls how long the master waits on
     a commit for acknowledgment from a slave before timing out and
     reverting to asynchronous replication. The default value is 10000
     (10 seconds).

     This variable is available only if the master-side semisynchronous
     replication plugin is installed.

   *  `rpl_semi_sync_master_trace_level'

     Options for rpl_semi_sync_master_trace_level

     *System Variable     `rpl_semi_sync_master_trace_level'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `32'            

     The semisynchronous replication debug trace level on the master.
     Currently, four levels are defined:

        * 1 = general level (for example, time function failures)

        * 16 = detail level (more verbose information)

        * 32 = net wait level (more information about network waits)

        * 64 = function level (information about function entry and
          exit)

     This variable is available only if the master-side semisynchronous
     replication plugin is installed.

   *  `rpl_semi_sync_master_wait_no_slave'

     Options for rpl_semi_sync_master_wait_no_slave

     *System Variable     `rpl_semi_sync_master_wait_no_slave'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            

     With semisynchronous replication, for each transaction, the master
     waits until timeout for acknowledgment of receipt from some
     semisynchronous slave. If no response occurs during this period,
     the master reverts to normal replication. This variable controls
     whether the master waits for the timeout to expire before
     reverting to normal replication even if the slave count drops to
     zero during the timeout period.

     If the value is `ON' (the default), it is permissible for the
     slave count to drop to zero during the timeout period (for
     example, if slaves disconnect). The master still waits for the
     timeout, so as long as some slave reconnects and acknowledges the
     transaction within the timeout interval, semisynchronous
     replication continues.

     If the value is `OFF', the master reverts to normal replication if
     the slave count drops to zero during the timeout period.

     This variable is available only if the master-side semisynchronous
     replication plugin is installed.

   *  `rpl_semi_sync_slave_enabled'

     Options for rpl_semi_sync_slave_enabled

     *System Variable     `rpl_semi_sync_slave_enabled'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Controls whether semisynchronous replication is enabled on the
     slave. To enable or disable the plugin, set this variable to `ON'
     or `OFF' (or 1 or 0), respectively. The default is `OFF'.

     This variable is available only if the slave-side semisynchronous
     replication plugin is installed.

   *  `rpl_semi_sync_slave_trace_level'

     Options for rpl_semi_sync_slave_trace_level

     *System Variable     `rpl_semi_sync_slave_trace_level'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `32'            

     The semisynchronous replication debug trace level on the slave. See
     `rpl_semi_sync_master_trace_level' for the permissible values.

     This variable is available only if the slave-side semisynchronous
     replication plugin is installed.

   *  `secure_auth'

     Options for secure-auth

     *Command-Line        `--secure-auth'        
     Format*                              
     *Option-File Format* `secure-auth'        
     *System Variable     `secure_auth'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     If this variable is enabled, the server blocks connections by
     clients that attempt to use accounts that have passwords stored in
     the old (pre-4.1) format.

     Enable this variable to prevent all use of passwords employing the
     old format (and hence insecure communication over the network).

     Server startup fails with an error if this variable is enabled and
     the privilege tables are in pre-4.1 format. See *Note old-client::.

     *Note*:

     Passwords that use the pre-4.1 hashing method are less secure than
     passwords that use the native password hashing method and should
     be avoided.

   *  `secure_file_priv'

     Options for secure-file-priv

     *Command-Line        `--secure-file-priv=path'        
     Format*                              
     *Option-File Format* `secure-file-priv'        
     *System Variable     `secure_file_priv'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        

     By default, this variable is empty. If set to the name of a
     directory, it limits the effect of the `LOAD_FILE()' function and
     the *Note `LOAD DATA': load-data. and *Note `SELECT ... INTO
     OUTFILE': select-into. statements to work only with files in that
     directory.

   *  `server_id'

     Options for server-id

     *Command-Line        `--server-id=#'        
     Format*                              
     *Option-File Format* `server-id'        
     *System Variable     `server_id'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          4294967295'        

     The server ID, used in replication to give each master and slave a
     unique identity. This variable is set by the `--server-id' option.
     For each server participating in replication, you should pick a
     positive integer in the range from 1 to 2^32 - 1 to act as that
     server's ID.

   *  `shared_memory'

     Options for shared_memory

     *System Variable     `shared_memory'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
     *Platform Specific*  windows         

     (Windows only.) Whether the server permits shared-memory
     connections.

   *  `shared_memory_base_name'

     Options for shared_memory_base_name

     *System Variable     `shared_memory_base_name'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
     *Platform Specific*  windows         

     (Windows only.) The name of shared memory to use for shared-memory
     connections. This is useful when running multiple MySQL instances
     on a single physical machine. The default name is `MYSQL'. The
     name is case sensitive.

   *  `skip_external_locking'

     Options for skip_external_locking

     *Command-Line        `--skip-external-locking'        
     Format*                              
     *Option-File Format* `skip_external_locking'        
     *System Variable     `skip_external_locking'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            

     This is `OFF' if *Note `mysqld': mysqld.  uses external locking
     (system locking), `ON' if external locking is disabled. This
     affects only *Note `MyISAM': myisam-storage-engine. table access.

     This variable is set by the `--external-locking' or
     `--skip-external-locking' option. External locking has been
     disabled by default as of MySQL 4.0.

     External locking affects only *Note `MyISAM':
     myisam-storage-engine. table access. For more information,
     including conditions under which it can and cannot be used, see
     *Note external-locking::.

   *  `skip_name_resolve'

     Options for skip-name-resolve

     *Command-Line        `--skip-name-resolve'        
     Format*                              
     *Option-File Format* `skip-name-resolve'        
     *System Variable     `skip_name_resolve'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     This variable is set from the value of the `--skip-name-resolve'
     option. If it is `ON', *Note `mysqld': mysqld.  resolves host
     names when checking client connections. If `OFF', *Note `mysqld':
     mysqld. uses only IP numbers and all `Host' column values in the
     grant tables must be IP addresses or `localhost'. See *Note
     host-cache::.

     This variable was added in MySQL 5.5.5.

   *  `skip_networking'

     Options for skip-networking

     *Command-Line        `--skip-networking'        
     Format*                              
     *Option-File Format* `skip-networking'        
     *System Variable     `skip_networking'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              

     This is `ON' if the server permits only local (non-TCP/IP)
     connections. On Unix, local connections use a Unix socket file. On
     Windows, local connections use a named pipe or shared memory. This
     variable can be set to `ON' with the `--skip-networking' option.

   *  `skip_show_database'

     Options for skip-show-database

     *Command-Line        `--skip-show-database'        
     Format*                              
     *Option-File Format* `skip-show-database'        
     *System Variable     `skip_show_database'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              

     This prevents people from using the *Note `SHOW DATABASES':
     show-databases. statement if they do not have the `SHOW DATABASES'
     privilege. This can improve security if you have concerns about
     users being able to see databases belonging to other users. Its
     effect depends on the `SHOW DATABASES' privilege: If the variable
     value is `ON', the *Note `SHOW DATABASES': show-databases.
     statement is permitted only to users who have the `SHOW DATABASES'
     privilege, and the statement displays all database names. If the
     value is `OFF', *Note `SHOW DATABASES': show-databases. is
     permitted to all users, but displays the names of only those
     databases for which the user has the `SHOW DATABASES' or other
     privilege. (Note that _any_ global privilege is considered a
     privilege for the database.)

   *  `slow_launch_time'

     Options for slow_launch_time

     *Command-Line        `--slow_launch_time=#'        
     Format*                              
     *Option-File Format* `slow_launch_time'        
     *System Variable     `slow_launch_time'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `2'             

     If creating a thread takes longer than this many seconds, the
     server increments the `Slow_launch_threads' status variable.

   *  `slow_query_log'

     Options for slow-query-log

     *Command-Line        `--slow-query-log'        
     Format*                              
     *Option-File Format* `slow-query-log'        
     *System Variable     `slow_query_log'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Whether the slow query log is enabled. The value can be 0 (or
     `OFF') to disable the log or 1 (or `ON') to enable the log. The
     default value depends on whether the `--slow_query_log' option is
     given. The destination for log output is controlled by the
     `log_output' system variable; if that value is `NONE', no log
     entries are written even if the log is enabled.

     `Slow' is determined by the value of the `long_query_time'
     variable. See *Note slow-query-log::.

   *  `slow_query_log_file'

     Options for slow_query_log_file

     *Command-Line        `--slow-query-log-file=file_name'        
     Format*                              
     *Option-File Format* `slow_query_log_file'        
     *System Variable     `slow_query_log_file'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The name of the slow query log file. The default value is
     `HOST_NAME-slow.log', but the initial value can be changed with the
     `--slow_query_log_file' option.

   *  `socket'

     Options for socket

     *Command-Line        `--socket=name'        
     Format*                              
     *Option-File Format* `socket'        
     *System Variable     `socket'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           
     *Default*            `/tmp/mysql.sock'        

     On Unix platforms, this variable is the name of the socket file
     that is used for local client connections. The default is
     `/tmp/mysql.sock'. (For some distribution formats, the directory
     might be different, such as `/var/lib/mysql' for RPMs.)

     On Windows, this variable is the name of the named pipe that is
     used for local client connections. The default value is `MySQL'
     (not case sensitive).

   *  `sort_buffer_size'

     Options for sort_buffer_size

     *Command-Line        `--sort_buffer_size=#'        
     Format*                              
     *Option-File Format* `sort_buffer_size'        
     *System Variable     `sort_buffer_size'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `2097144'        
     *Range*              `32768          
                          ..              
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `2097144'        
     *Range*              `32768          
                          ..              
                          18446744073709547520'        

     Each session that needs to do a sort allocates a buffer of this
     size. `sort_buffer_size' is not specific to any storage engine and
     applies in a general manner for optimization. See *Note
     order-by-optimization::, for example.

     If you see many `Sort_merge_passes' per second in *Note `SHOW
     GLOBAL STATUS': show-status. output, you can consider increasing
     the `sort_buffer_size' value to speed up `ORDER BY' or `GROUP BY'
     operations that cannot be improved with query optimization or
     improved indexing. The entire buffer is allocated even if it is
     not all needed, so setting it larger than required globally will
     slow down most queries that sort.  It is best to increase it as a
     session setting, and only for the sessions that need a larger
     size. On Linux, there are thresholds of 256KB and 2MB where larger
     values may significantly slow down memory allocation, so you should
     consider staying below one of those values. Experiment to find the
     best value for your workload. See *Note temporary-files::.

     The maximum permissible setting for `sort_buffer_size' is 4GB.
     Values larger than 4GB are permitted for 64-bit platforms (except
     64-bit Windows, for which large values are truncated to 4GB with a
     warning).

   *  `sql_auto_is_null'

     Options for sql_auto_is_null

     *System Variable     `sql_auto_is_null'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values          
                          (<=             
                          5.5.2)*         
     *Type*               `boolean'        
     *Default*            `1'             
                          *Permitted        
                          Values          
                          (>=             
                          5.5.3)*         
     *Type*               `boolean'        
     *Default*            `0'             

     If this variable is set to 1, then after a statement that
     successfully inserts an automatically generated `AUTO_INCREMENT'
     value, you can find that value by issuing a statement of the
     following form:

          SELECT * FROM TBL_NAME WHERE AUTO_COL IS NULL

     If the statement returns a row, the value returned is the same as
     if you invoked the `LAST_INSERT_ID()' function. For details,
     including the return value after a multiple-row insert, see *Note
     information-functions::. If no `AUTO_INCREMENT' value was
     successfully inserted, the *Note `SELECT': select. statement
     returns no row.

     The behavior of retrieving an `AUTO_INCREMENT' value by using an
     `IS NULL' comparison is used by some ODBC programs, such as
     Access. See *Note
     connector-odbc-usagenotes-functionality-last-insert-id::.  This
     behavior can be disabled by setting `sql_auto_is_null' to 0.

     The default value of `sql_auto_is_null' is 0 as of MySQL 5.5.3,
     and 1 for earlier versions.

   *  `sql_big_selects'

     Options for sql_big_selects

     *System Variable     `sql_big_selects'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `1'             

     If set to 0, MySQL aborts *Note `SELECT': select. statements that
     are likely to take a very long time to execute (that is,
     statements for which the optimizer estimates that the number of
     examined rows exceeds the value of `max_join_size'). This is
     useful when an inadvisable `WHERE' statement has been issued. The
     default value for a new connection is 1, which permits all *Note
     `SELECT': select.  statements.

     If you set the `max_join_size' system variable to a value other
     than `DEFAULT', `sql_big_selects' is set to 0.

   *  `sql_buffer_result'

     Options for sql_buffer_result

     *System Variable     `sql_buffer_result'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `0'             

     If set to 1, `sql_buffer_result' forces results from *Note
     `SELECT': select. statements to be put into temporary tables. This
     helps MySQL free the table locks early and can be beneficial in
     cases where it takes a long time to send results to the client.
     The default value is 0.

   *  `sql_log_bin'

     Options for sql_log_bin

     *System Variable     `sql_log_bin'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        

     This variable controls whether logging to the binary log is done.
     The default value is 1 (do logging). To change logging for the
     current session, change the session value of this variable. The
     session user must have the `SUPER' privilege to set this variable.

     Beginning with MySQL 5.5.5, it is no longer possible to set
     `@@session.sql_log_bin' within a transaction or subquery. (Bug
     #53437)

   *  `sql_log_off'

     Options for sql_log_off

     *System Variable     `sql_log_off'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `0'             

     This variable controls whether logging to the general query log is
     done. The default value is 0 (do logging). To change logging for
     the current session, change the session value of this variable.
     The session user must have the `SUPER' privilege to set this
     option. The default value is 0.

   *  `sql_log_update'

     Options for sql_log_update

     *Deprecated*         5.0.0,          
                          by              
                          sql_log_bin        
     *Removed*            5.5.3           
     *System Variable     `sql_log_update'        
     Name*                                
     *Variable Scope*     Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        

     This variable is deprecated, and is mapped to `sql_log_bin'. It
     was removed in MySQL 5.5.3.

   *  `sql_mode'

     Options for sql-mode

     *Command-Line        `--sql-mode=name'        
     Format*                              
     *Option-File Format* `sql-mode'        
     *System Variable     `sql_mode'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `set'           
     *Default*            `'''            
     *Valid Values*       `ALLOW_INVALID_DATES'        
     `ANSI_QUOTES'                        
     `ERROR_FOR_DIVISION_BY_ZERO'                
     `HIGH_NOT_PRECEDENCE'                
     `IGNORE_SPACE'                       
     `NO_AUTO_CREATE_USER'                
     `NO_AUTO_VALUE_ON_ZERO'                
     `NO_BACKSLASH_ESCAPES'                
     `NO_DIR_IN_CREATE'                   
     `NO_ENGINE_SUBSTITUTION'                
     `NO_FIELD_OPTIONS'                   
     `NO_KEY_OPTIONS'                     
     `NO_TABLE_OPTIONS'                   
     `NO_UNSIGNED_SUBTRACTION'                
     `NO_ZERO_DATE'                       
     `NO_ZERO_IN_DATE'                    
     `ONLY_FULL_GROUP_BY'                 
     `PAD_CHAR_TO_FULL_LENGTH'                
     `PIPES_AS_CONCAT'                    
     `REAL_AS_FLOAT'                      
     `STRICT_ALL_TABLES'                  
     `STRICT_TRANS_TABLES'                

     The current server SQL mode, which can be set dynamically. See
     *Note server-sql-mode::.

     *Note*:

     MySQL installation programs may configure the SQL mode during the
     installation process. If the SQL mode differs from the default or
     from what you expect, check for a setting in an option file that
     the server reads at startup.

   *  `sql_notes'

     If set to 1 (the default), warnings of `Note' level increment
     `warning_count' and the server records them. If set to 0, `Note'
     warnings do not increment `warning_count' and the server does not
     record them. *Note `mysqldump': mysqldump. includes output to set
     this variable to 0 so that reloading the dump file does not
     produce warnings for events that do not affect the integrity of
     the reload operation.

   *  `sql_quote_show_create'

     If set to 1 (the default), the server quotes identifiers for *Note
     `SHOW CREATE TABLE': show-create-table. and *Note `SHOW CREATE
     DATABASE': show-create-database.  statements. If set to 0, quoting
     is disabled. This option is enabled by default so that replication
     works for identifiers that require quoting. See *Note
     show-create-table::, and *Note show-create-database::.

   *  `sql_safe_updates'

     If set to 1, MySQL aborts *Note `UPDATE': update. or *Note
     `DELETE': delete. statements that do not use a key in the `WHERE'
     clause or a `LIMIT' clause. This makes it possible to catch *Note
     `UPDATE': update. or *Note `DELETE': delete. statements where keys
     are not used properly and that would probably change or delete a
     large number of rows. The default value is 0.

   *  `sql_select_limit'

     Options for sql_select_limit

     *System Variable     `sql_select_limit'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        

     The maximum number of rows to return from *Note `SELECT': select.
     statements. The default value for a new connection is the maximum
     number of rows that the server permits per table. Typical default
     values are (2^32)-1 or (2^64)-1. If you have changed the limit,
     the default value can be restored by assigning a value of
     `DEFAULT'.

     If a *Note `SELECT': select. has a `LIMIT' clause, the `LIMIT'
     takes precedence over the value of `sql_select_limit'.

   *  `sql_warnings'

     This variable controls whether single-row *Note `INSERT': insert.
     statements produce an information string if warnings occur. The
     default is 0. Set the value to 1 to produce an information string.

   *  `ssl_ca'

     Options for ssl-ca

     *Command-Line        `--ssl-ca=name'        
     Format*                              
     *Option-File Format* `ssl-ca'        
     *System Variable     `ssl_ca'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The path to a file with a list of trusted SSL CAs.

   *  `ssl_capath'

     Options for ssl-capath

     *Command-Line        `--ssl-capath=name'        
     Format*                              
     *Option-File Format* `ssl-capath'        
     *System Variable     `ssl_capath'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `directory        
                          name'           

     The path to a directory that contains trusted SSL CA certificates
     in PEM format.

   *  `ssl_cert'

     Options for ssl-cert

     *Command-Line        `--ssl-cert=name'        
     Format*                              
     *Option-File Format* `ssl-cert'        
     *System Variable     `ssl_cert'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The name of the SSL certificate file to use for establishing a
     secure connection.

   *  `ssl_cipher'

     Options for ssl-cipher

     *Command-Line        `--ssl-cipher=name'        
     Format*                              
     *Option-File Format* `ssl-cipher'        
     *System Variable     `ssl_cipher'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     A list of permissible ciphers to use for SSL encryption.

   *  `ssl_key'

     Options for ssl-key

     *Command-Line        `--ssl-key=name'        
     Format*                              
     *Option-File Format* `ssl-key'        
     *System Variable     `ssl_key'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The name of the SSL key file to use for establishing a secure
     connection.

   *  `storage_engine'

     Options for storage_engine

     *System Variable     `storage_engine'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values          
                          (>=             
                          5.5.3,          
                          <=              
                          5.5.4)*         
     *Type*               `enumeration'        
     *Default*            `MyISAM'        
                          *Permitted        
                          Values          
                          (>=             
                          5.5.5)*         
     *Type*               `enumeration'        
     *Default*            `InnoDB'        

     The default storage engine (table type). To set the storage engine
     at server startup, use the `--default-storage-engine' option. See
     *Note server-options::.

     This variable is deprecated as of MySQL 5.5.3. Use
     `default_storage_engine' instead.

   *  `stored_program_cache'

     Options for stored_program_cache

     *Introduced*         5.5.21          
     *Command-Line        `--stored-program-cache=#'        
     Format*                              
     *Option-File Format* `stored_program_cache'        
     *System Variable     `stored_program_cache'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `256'           
     *Range*              `256            
                          ..              
                          524288'         

     Sets a soft upper limit for the number of cached stored routines
     per connection. The value of this variable is specified in terms
     of the number of stored routines held in each of the two caches
     maintained by the MySQL Server for, respectively, stored
     procedures and stored functions.

     Whenever a stored routine is executed this cache size is checked
     before the first or top-level statement in the routine is parsed;
     if the number of routines of the same type (stored procedures or
     stored functions according to which is being executed) exceeds the
     limit specified by this variable, the corresponding cache is
     flushed and memory previously allocated for cached objects is
     freed. This allows the cache to be flushed safely, even when there
     are dependencies between stored routines.

   *  `sync_frm'

     Options for sync_frm

     *Command-Line        `--sync-frm'        
     Format*                              
     *Option-File Format* `sync_frm'        
     *System Variable     `sync_frm'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `TRUE'          

     If this variable is set to 1, when any nontemporary table is
     created its `.frm' file is synchronized to disk (using
     `fdatasync()'). This is slower but safer in case of a crash. The
     default is 1.

   *  `system_time_zone'

     Options for system_time_zone

     *System Variable     `system_time_zone'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The server system time zone. When the server begins executing, it
     inherits a time zone setting from the machine defaults, possibly
     modified by the environment of the account used for running the
     server or the startup script. The value is used to set
     `system_time_zone'.  Typically the time zone is specified by the
     `TZ' environment variable. It also can be specified using the
     `--timezone' option of the *Note `mysqld_safe': mysqld-safe.
     script.

     The `system_time_zone' variable differs from `time_zone'.
     Although they might have the same value, the latter variable is
     used to initialize the time zone for each client that connects.
     See *Note time-zone-support::.

   *  `table_definition_cache'

     Options for table_definition_cache

     *System Variable     `table_definition_cache'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `400'           
     *Range*              `400            
                          ..              
                          524288'         

     The number of table definitions (from `.frm' files) that can be
     stored in the definition cache. If you use a large number of
     tables, you can create a large table definition cache to speed up
     opening of tables. The table definition cache takes less space and
     does not use file descriptors, unlike the normal table cache. The
     minimum and default values are both 400.

   *  `table_lock_wait_timeout'

     Options for table_lock_wait_timeout

     *Removed*            5.5.3           
     *Command-Line        `--table_lock_wait_timeout=#'        
     Format*                              
     *Option-File Format* `table_lock_wait_timeout'        
     *System Variable     `table_lock_wait_timeout'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `50'            
     *Range*              `1 ..           
                          1073741824'        

     This variable is unused. It was removed in 5.5.3.

   *  `table_open_cache'

     Options for table_open_cache

     *System Variable     `table_open_cache'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `400'           
     *Range*              `64 ..          
                          524288'         

     The number of open tables for all threads. Increasing this value
     increases the number of file descriptors that *Note `mysqld':
     mysqld. requires. You can check whether you need to increase the
     table cache by checking the `Opened_tables' status variable. See
     *Note server-status-variables::. If the value of `Opened_tables'
     is large and you do not use *Note `FLUSH TABLES': flush.  often
     (which just forces all tables to be closed and reopened), then you
     should increase the value of the `table_open_cache' variable.  For
     more information about the table cache, see *Note table-cache::.

   *  `table_type'

     This variable was removed in MySQL 5.5.3. Use `storage_engine'
     instead.

   *  `thread_cache_size'

     Options for thread_cache_size

     *Command-Line        `--thread_cache_size=#'        
     Format*                              
     *Option-File Format* `thread_cache_size'        
     *System Variable     `thread_cache_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          16384'          

     How many threads the server should cache for reuse. When a client
     disconnects, the client's threads are put in the cache if there
     are fewer than `thread_cache_size' threads there. Requests for
     threads are satisfied by reusing threads taken from the cache if
     possible, and only when the cache is empty is a new thread
     created. This variable can be increased to improve performance if
     you have a lot of new connections.  Normally, this does not
     provide a notable performance improvement if you have a good
     thread implementation. However, if your server sees hundreds of
     connections per second you should normally set `thread_cache_size'
     high enough so that most new connections use cached threads. By
     examining the difference between the `Connections' and
     `Threads_created' status variables, you can see how efficient the
     thread cache is. For details, see *Note server-status-variables::.

   *  `thread_concurrency'

     Options for thread_concurrency

     *Command-Line        `--thread_concurrency=#'        
     Format*                              
     *Option-File Format* `thread_concurrency'        
     *System Variable     `thread_concurrency'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `10'            
     *Range*              `1 ..           
                          512'            

     This variable is specific to Solaris 8 and earlier systems, for
     which *Note `mysqld': mysqld. invokes the `thr_setconcurrency()'
     function with the variable value. This function enables
     applications to give the threads system a hint about the desired
     number of threads that should be run at the same time. Current
     Solaris versions document this as having no effect.

   *  `thread_handling'

     Options for thread_handling

     *Command-Line        `--thread_handling=name'        
     Format*                              
     *Option-File Format* `thread_handling'        
     *System Variable     `thread_handling'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values          
                          (<=             
                          5.5.13)*        
     *Type*               `enumeration'        
     *Valid Values*       `no-threads'        
     `one-thread-per-connection'                
                          *Permitted        
                          Values          
                          (>=             
                          5.5.16)*        
     *Type*               `enumeration'        
     *Valid Values*       `no-threads'        
     `one-thread-per-connection'                
     `dynamically-loaded'                 

     The thread-handling model used by the server for connection
     threads. The permissible user-settable values are `no-threads'
     (the server uses a single thread) and `one-thread-per-connection'
     (the server uses one thread to handle each client connection; this
     is the default). `no-threads' is useful for debugging under Linux;
     see *Note porting::.

     If the thread pool plugin is enabled, the server sets the
     `thread_handling' value to `dynamically-loaded'. See *Note
     thread-pool-installation::.

   *  `thread_pool_algorithm'

     Options for thread_pool_algorithm

     *Introduced*         5.5.16          
     *Command-Line        `--thread_pool_algorithm=#'        
     Format*                              
     *Option-File Format* `thread_pool_algorithm'        
     *System Variable     `thread_pool_algorithm'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          1'              

     This variable controls which algorithm the thread pool plugin uses:

        * A value of 0 (the default) uses a conservative
          low-concurrency algorithm which is most well tested and is
          known to produce very good results.

        * A value of 1 increases the concurrency and uses a more
          aggressive algorithm which at times has been known to perform
          5-10% better on optimal thread counts, but has degrading
          performance as the number of connections increases. Its use
          should be considered as experimental and not supported.

          This variable was added in MySQL 5.5.16. It is available only
          if the thread pool plugin is enabled. See *Note
          thread-pool-plugin::

   *  `thread_pool_high_priority_connection'

     Options for thread_pool_high_priority_connection

     *Introduced*         5.5.16          
     *Command-Line        `--thread_pool_high_priority_connection=#'        
     Format*                              
     *Option-File Format* `thread_pool_high_priority_connection'        
     *System Variable     `thread_pool_high_priority_connection'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          1'              

     This variable affects queuing of new statements prior to
     execution. If the value is 0 (false, the default), statement
     queuing uses both the low-priority and high-priority queues.  If
     the value is 1 (true), queued statements always go to the
     high-priority queue.

     This variable was added in MySQL 5.5.16. It is available only if
     the thread pool plugin is enabled. See *Note thread-pool-plugin::

   *  `thread_pool_max_unused_threads'

     Options for thread_pool_max_unused_threads

     *Introduced*         5.5.16          
     *Command-Line        `--thread_pool_max_unused_threads=#'        
     Format*                              
     *Option-File Format* `thread_pool_max_unused_threads'        
     *System Variable     `thread_pool_max_unused_threads'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          4096'           

     The maximum permitted number of unused threads in the thread pool.
     This variable makes it possible to limit the amount of memory used
     by sleeping threads.

     A value of 0 (the default) means no limit on the number of
     sleeping threads. A value of N where N is greater than 0 means 1
     consumer thread and N-1 reserve threads. In this case, if a thread
     is ready to sleep but the number of sleeping threads is already at
     the maximum, the thread exits rather than going to sleep.

     A sleeping thread is either sleeping as a consumer thread or a
     reserve thread. The thread pool permits one thread to be the
     consumer thread when sleeping. If a thread goes to sleep and there
     is no existing consumer thread, it will sleep as a consumer
     thread. When a thread must be woken up, a consumer thread is
     selected if there is one. A reserve thread is selected only when
     there is no consumer thread to wake up.

     This variable was added in MySQL 5.5.16. It is available only if
     the thread pool plugin is enabled. See *Note thread-pool-plugin::

   *  `thread_pool_prio_kickup_timer'

     Options for thread_pool_prio_kickup_timer

     *Introduced*         5.5.16          
     *Command-Line        `--thread_pool_prio_kickup_timer=#'        
     Format*                              
     *Option-File Format* `thread_pool_prio_kickup_timer'        
     *System Variable     `thread_pool_prio_kickup_timer'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1000'          
     *Range*              `0 ..           
                          4294967294'        

     This variable affects statements waiting for execution in the
     low-priority queue. The value is the number of milliseconds before
     a waiting statement is moved to the high-priority queue. The
     default is 1000 (1 second). The range of values is 0 to 2^32 - 2.

     This variable was added in MySQL 5.5.16. It is available only if
     the thread pool plugin is enabled. See *Note thread-pool-plugin::

   *  `thread_pool_size'

     Options for thread_pool_size

     *Introduced*         5.5.16          
     *Command-Line        `--thread_pool_size=#'        
     Format*                              
     *Option-File Format* `thread_pool_size'        
     *System Variable     `thread_pool_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `16'            
     *Range*              `1 ..           
                          64'             

     The number of thread groups in the thread pool. This is the most
     important parameter controlling thread pool performance.  It
     affects how many statements can execute simultaneously. The
     default value is 16, with a range from 1 to 64 of permissible
     values. If a value outside this range is specified, the thread
     pool plugin does not load and the server writes a message to the
     error log.

     This variable was added in MySQL 5.5.16. It is available only if
     the thread pool plugin is enabled. See *Note thread-pool-plugin::

   *  `thread_pool_stall_limit'

     Options for thread_pool_stall_limit

     *Introduced*         5.5.16          
     *Command-Line        `--thread_pool_stall_limit=#'        
     Format*                              
     *Option-File Format* `thread_pool_stall_limit'        
     *System Variable     `thread_pool_stall_limit'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `6'             
     *Range*              `4 ..           
                          600'            

     This variable affects executing statements. The value is the
     amount of time a statement has to finish after starting to execute
     before it becomes defined as stalled, at which point the thread
     pool permits the thread group to begin executing another
     statement. The value is measured in 10 millisecond units, so a
     value of 6 (the default) means 60ms. The range of values is 4 to
     600 (40ms to 6s). Short wait values permit threads to start more
     quickly. Short values are also better for avoiding deadlock
     situations. Long wait values are useful for workloads that include
     long-running statements, to avoid starting too many new statements
     while the current ones execute.

     This variable was added in MySQL 5.5.16. It is available only if
     the thread pool plugin is enabled. See *Note thread-pool-plugin::

   *  `thread_stack'

     Options for thread_stack

     *Command-Line        `--thread_stack=#'        
     Format*                              
     *Option-File Format* `thread_stack'        
     *System Variable     `thread_stack'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `196608'        
     *Range*              `131072         
                          ..              
                          4294967295'        
     *Block Size*         `1024'          
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `262144'        
     *Range*              `131072         
                          ..              
                          18446744073709547520'        
     *Block Size*         `1024'          

     The stack size for each thread. Many of the limits detected by the
     `crash-me' test are dependent on this value. See *Note
     mysql-benchmarks::. The default of 192KB (256KB for 64-bit
     systems) is large enough for normal operation. If the thread stack
     size is too small, it limits the complexity of the SQL statements
     that the server can handle, the recursion depth of stored
     procedures, and other memory-consuming actions.

   *  `time_format'

     This variable is unused.

   *  `time_zone'

     Options for time_zone

     *System Variable     `time_zone'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The current time zone. This variable is used to initialize the
     time zone for each client that connects. By default, the initial
     value of this is `'SYSTEM'' (which means, `use the value of
     `system_time_zone'').  The value can be specified explicitly at
     server startup with the `--default-time-zone' option.  See *Note
     time-zone-support::.

   *  `timed_mutexes'

     Options for timed_mutexes

     *Command-Line        `--timed_mutexes'        
     Format*                              
     *Option-File Format* `timed_mutexes'        
     *System Variable     `timed_mutexes'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     This variable controls whether `InnoDB' mutexes are timed. If this
     variable is set to 0 or `OFF' (the default), mutex timing is
     disabled. If the variable is set to 1 or `ON', mutex timing is
     enabled. With timing enabled, the `os_wait_times' value in the
     output from *Note `SHOW ENGINE INNODB MUTEX': show-engine.
     indicates the amount of time (in ms) spent in operating system
     waits. Otherwise, the value is 0.

   *  `timestamp = {TIMESTAMP_VALUE | DEFAULT}'

     Set the time for this client. This is used to get the original
     timestamp if you use the binary log to restore rows.
     TIMESTAMP_VALUE should be a Unix epoch timestamp, not a MySQL
     timestamp.

     `SET timestamp' affects the value returned by `NOW()' but not by
     `SYSDATE()'. This means that timestamp settings in the binary log
     have no effect on invocations of `SYSDATE()'. The server can be
     started with the `--sysdate-is-now' option to cause `SYSDATE()' to
     be an alias for `NOW()', in which case `SET timestamp' affects
     both functions.

   *  `tmp_table_size'

     Options for tmp_table_size

     *Command-Line        `--tmp_table_size=#'        
     Format*                              
     *Option-File Format* `tmp_table_size'        
     *System Variable     `tmp_table_size'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `system         
                          dependent'        
     *Range*              `1024           
                          ..              
                          4294967295'        

     The maximum size of internal in-memory temporary tables. (The
     actual limit is determined as the minimum of `tmp_table_size' and
     `max_heap_table_size'.) If an in-memory temporary table exceeds
     the limit, MySQL automatically converts it to an on-disk `MyISAM'
     table. Increase the value of `tmp_table_size' (and
     `max_heap_table_size' if necessary) if you do many advanced `GROUP
     BY' queries and you have lots of memory. This variable does not
     apply to user-created `MEMORY' tables.

     You can compare the number of internal on-disk temporary tables
     created to the total number of internal temporary tables created
     by comparing the values of the `Created_tmp_disk_tables' and
     `Created_tmp_tables' variables.

     See also *Note internal-temporary-tables::.

   *  `tmpdir'

     Options for tmpdir

     *Command-Line        `--tmpdir=path'        
     Format*                              
                          `-t'            
     *Option-File Format* `tmpdir'        
     *System Variable     `tmpdir'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The directory used for temporary files and temporary tables.  This
     variable can be set to a list of several paths that are used in
     round-robin fashion. Paths should be separated by colon characters
     (``:'') on Unix and semicolon characters (``;'') on Windows.

     The multiple-directory feature can be used to spread the load
     between several physical disks. If the MySQL server is acting as a
     replication slave, you should not set `tmpdir' to point to a
     directory on a memory-based file system or to a directory that is
     cleared when the server host restarts. A replication slave needs
     some of its temporary files to survive a machine restart so that
     it can replicate temporary tables or *Note `LOAD DATA INFILE':
     load-data. operations. If files in the temporary file directory
     are lost when the server restarts, replication fails. You can set
     the slave's temporary directory using the `slave_load_tmpdir'
     variable.  In that case, the slave will not use the general
     `tmpdir' value and you can set `tmpdir' to a nonpermanent location.

   *  `transaction_alloc_block_size'

     Options for transaction_alloc_block_size

     *Command-Line        `--transaction_alloc_block_size=#'        
     Format*                              
     *Option-File Format* `transaction_alloc_block_size'        
     *System Variable     `transaction_alloc_block_size'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `8192'          
     *Range*              `1024           
                          ..              
                          4294967295'        
     *Block Size*         `1024'          
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `8192'          
     *Range*              `1024           
                          ..              
                          18446744073709547520'        
     *Block Size*         `1024'          

     The amount in bytes by which to increase a per-transaction memory
     pool which needs memory. See the description of
     `transaction_prealloc_size'.

   *  `transaction_prealloc_size'

     Options for transaction_prealloc_size

     *Command-Line        `--transaction_prealloc_size=#'        
     Format*                              
     *Option-File Format* `transaction_prealloc_size'        
     *System Variable     `transaction_prealloc_size'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `4096'          
     *Range*              `1024           
                          ..              
                          4294967295'        
     *Block Size*         `1024'          
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `4096'          
     *Range*              `1024           
                          ..              
                          18446744073709547520'        
     *Block Size*         `1024'          

     There is a per-transaction memory pool from which various
     transaction-related allocations take memory. The initial size of
     the pool in bytes is `transaction_prealloc_size'.  For every
     allocation that cannot be satisfied from the pool because it has
     insufficient memory available, the pool is increased by
     `transaction_alloc_block_size' bytes. When the transaction ends,
     the pool is truncated to `transaction_prealloc_size' bytes.

     By making `transaction_prealloc_size' sufficiently large to
     contain all statements within a single transaction, you can avoid
     many `malloc()' calls.

   *  `tx_isolation'

     Options for tx_isolation

     *System Variable     `tx_isolation'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `REPEATABLE-READ'        
     *Valid Values*       `READ-UNCOMMITTED'        
     `READ-COMMITTED'                     
     `REPEATABLE-READ'                    
     ` SERIALIZABLE '                     

     The default transaction isolation level. Defaults to
     `REPEATABLE-READ'.

     This variable can be set directly, or indirectly using the *Note
     `SET TRANSACTION': set-transaction. statement. See *Note
     set-transaction::. If you set `tx_isolation' directly to an
     isolation level name that contains a space, the name should be
     enclosed within quotation marks, with the space replaced by a
     dash. For example:

          SET tx_isolation = 'READ-COMMITTED';

     Any unique prefix of a valid value may be used to set the value of
     this variable.

     The default transaction isolation level can also be set at startup
     using the `--transaction-isolation' server option.

   *  `unique_checks'

     Options for unique_checks

     *System Variable     `unique_checks'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `1'             

     If set to 1 (the default), uniqueness checks for secondary indexes
     in `InnoDB' tables are performed. If set to 0, storage engines are
     permitted to assume that duplicate keys are not present in input
     data. If you know for certain that your data does not contain
     uniqueness violations, you can set this to 0 to speed up large
     table imports to `InnoDB'.

     Note that setting this variable to 0 does not _require_ storage
     engines to ignore duplicate keys. An engine is still permitted to
     check for them and issue duplicate-key errors if it detects them.

   *  `updatable_views_with_limit'

     Options for updatable_views_with_limit

     *Command-Line        `--updatable_views_with_limit=#'        
     Format*                              
     *Option-File Format* `updatable_views_with_limit'        
     *System Variable     `updatable_views_with_limit'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `1'             

     This variable controls whether updates to a view can be made when
     the view does not contain all columns of the primary key defined
     in the underlying table, if the update statement contains a
     `LIMIT' clause. (Such updates often are generated by GUI tools.)
     An update is an *Note `UPDATE': update. or *Note `DELETE': delete.
     statement. Primary key here means a `PRIMARY KEY', or a `UNIQUE'
     index in which no column can contain `NULL'.

     The variable can have two values:

        * `1' or `YES': Issue a warning only (not an error message).
          This is the default value.

        * `0' or `NO': Prohibit the update.

   *  `version'

     The version number for the server. The value might also include a
     suffix indicating server build or configuration information.
     `-log' indicates that one or more of the general log, slow query
     log, or binary log are enabled. `-debug' indicates that the server
     was built with debugging support enabled.

   *  `version_comment'

     Options for version_comment

     *System Variable     `version_comment'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The `CMake' configuration program has a `COMPILATION_COMMENT'
     option that permits a comment to be specified when building MySQL.
     This variable contains the value of that comment. See *Note
     source-configuration-options::.

   *  `version_compile_machine'

     Options for version_compile_machine

     *System Variable     `version_compile_machine'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The type of machine or architecture on which MySQL was built.

   *  `version_compile_os'

     Options for version_compile_os

     *System Variable     `version_compile_os'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The type of operating system on which MySQL was built.

   *  `wait_timeout'

     Options for wait_timeout

     *Command-Line        `--wait_timeout=#'        
     Format*                              
     *Option-File Format* `wait_timeout'        
     *System Variable     `wait_timeout'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `28800'         
     *Range*              `1 ..           
                          31536000'        
                          *Permitted        
                          Values*         
     *Type* (windows)     `numeric'        
     *Default*            `28800'         
     *Range*              `1 ..           
                          2147483'        

     The number of seconds the server waits for activity on a
     noninteractive connection before closing it.

     On thread startup, the session `wait_timeout' value is initialized
     from the global `wait_timeout' value or from the global
     `interactive_timeout' value, depending on the type of client (as
     defined by the `CLIENT_INTERACTIVE' connect option to *Note
     `mysql_real_connect()': mysql-real-connect.). See also
     `interactive_timeout'.

   *  `warning_count'

     The number of errors, warnings, and notes that resulted from the
     last statement that generated messages. This variable is read
     only. See *Note show-warnings::.


File: manual.info,  Node: using-system-variables,  Next: server-status-variables,  Prev: server-system-variables,  Up: mysqld-server

5.1.5 Using System Variables
----------------------------

* Menu:

* structured-system-variables::  Structured System Variables
* dynamic-system-variables::     Dynamic System Variables

The MySQL server maintains many system variables that indicate how it
is configured. *Note server-system-variables::, describes the meaning
of these variables. Each system variable has a default value. System
variables can be set at server startup using options on the command
line or in an option file. Most of them can be changed dynamically
while the server is running by means of the *Note `SET': set-statement.
statement, which enables you to modify operation of the server without
having to stop and restart it. You can refer to system variable values
in expressions.

The server maintains two kinds of system variables. Global variables
affect the overall operation of the server. Session variables affect
its operation for individual client connections.  A given system
variable can have both a global and a session value. Global and session
system variables are related as follows:

   * When the server starts, it initializes all global variables to
     their default values. These defaults can be changed by options
     specified on the command line or in an option file. (See *Note
     program-options::.)

   * The server also maintains a set of session variables for each
     client that connects. The client's session variables are
     initialized at connect time using the current values of the
     corresponding global variables. For example, the client's SQL mode
     is controlled by the session `sql_mode' value, which is
     initialized when the client connects to the value of the global
     `sql_mode' value.

System variable values can be set globally at server startup by using
options on the command line or in an option file. When you use a
startup option to set a variable that takes a numeric value, the value
can be given with a suffix of `K', `M', or `G' (either uppercase or
lowercase) to indicate a multiplier of 1024, 1024^2 or 1024^3; that is,
units of kilobytes, megabytes, or gigabytes, respectively. Thus, the
following command starts the server with a query cache size of 16
megabytes and a maximum packet size of one gigabyte:

     mysqld --query_cache_size=16M --max_allowed_packet=1G

Within an option file, those variables are set like this:

     [mysqld]
     query_cache_size=16M
     max_allowed_packet=1G

The lettercase of suffix letters does not matter; `16M' and `16m' are
equivalent, as are `1G' and `1g'.

If you want to restrict the maximum value to which a system variable
can be set at runtime with the *Note `SET': set-statement.  statement,
you can specify this maximum by using an option of the form
`--maximum-VAR_NAME=VALUE' at server startup. For example, to prevent
the value of `query_cache_size' from being increased to more than 32MB
at runtime, use the option `--maximum-query_cache_size=32M'.

Many system variables are dynamic and can be changed while the server
runs by using the *Note `SET': set-statement.  statement. For a list,
see *Note dynamic-system-variables::. To change a system variable with
*Note `SET': set-statement, refer to it as VAR_NAME, optionally
preceded by a modifier:

   * To indicate explicitly that a variable is a global variable,
     precede its name by `GLOBAL' or `@@global.'. The `SUPER' privilege
     is required to set global variables.

   * To indicate explicitly that a variable is a session variable,
     precede its name by `SESSION', `@@session.', or `@@'.  Setting a
     session variable requires no special privilege, but a client can
     change only its own session variables, not those of any other
     client.

   * `LOCAL' and `@@local.' are synonyms for `SESSION' and `@@session.'.

   * If no modifier is present, *Note `SET': set-statement.  changes
     the session variable.

A *Note `SET': set-statement.  statement can contain multiple variable
assignments, separated by commas. If you set several system variables,
the most recent `GLOBAL' or `SESSION' modifier in the statement is used
for following variables that have no modifier specified.

Examples:

     SET sort_buffer_size=10000;
     SET @@local.sort_buffer_size=10000;
     SET GLOBAL sort_buffer_size=1000000, SESSION sort_buffer_size=1000000;
     SET @@sort_buffer_size=1000000;
     SET @@global.sort_buffer_size=1000000, @@local.sort_buffer_size=1000000;

The `@@VAR_NAME' syntax for system variables is supported for
compatibility with some other database systems.

If you change a session system variable, the value remains in effect
until your session ends or until you change the variable to a different
value. The change is not visible to other clients.

If you change a global system variable, the value is remembered and
used for new connections until the server restarts. (To make a global
system variable setting permanent, you should set it in an option
file.) The change is visible to any client that accesses that global
variable. However, the change affects the corresponding session
variable only for clients that connect after the change. The global
variable change does not affect the session variable for any client
that is currently connected (not even that of the client that issues the
*Note `SET GLOBAL': set-statement. statement).

To prevent incorrect usage, MySQL produces an error if you use *Note
`SET GLOBAL': set-statement. with a variable that can only be used with
*Note `SET SESSION': set-statement. or if you do not specify `GLOBAL'
(or `@@global.') when setting a global variable.

To set a `SESSION' variable to the `GLOBAL' value or a `GLOBAL' value
to the compiled-in MySQL default value, use the `DEFAULT' keyword. For
example, the following two statements are identical in setting the
session value of `max_join_size' to the global value:

     SET max_join_size=DEFAULT;
     SET @@session.max_join_size=@@global.max_join_size;

Not all system variables can be set to `DEFAULT'.  In such cases, use
of `DEFAULT' results in an error.

You can refer to the values of specific global or session system
variables in expressions by using one of the `@@'-modifiers. For
example, you can retrieve values in a *Note `SELECT': select. statement
like this:

     SELECT @@global.sql_mode, @@session.sql_mode, @@sql_mode;

When you refer to a system variable in an expression as `@@VAR_NAME'
(that is, when you do not specify `@@global.' or `@@session.'), MySQL
returns the session value if it exists and the global value otherwise.
(This differs from `SET @@VAR_NAME = VALUE', which always refers to the
session value.)

*Note*:

Some variables displayed by `SHOW VARIABLES' may not be available using
`SELECT @@VAR_NAME' syntax; an `Unknown system variable' occurs. As a
workaround in such cases, you can use `SHOW VARIABLES LIKE 'VAR_NAME''.

Suffixes for specifying a value multiplier can be used when setting a
variable at server startup, but not to set the value with *Note `SET':
set-statement.  at runtime. On the other hand, with *Note `SET':
set-statement. you can assign a variable's value using an expression,
which is not true when you set a variable at server startup. For
example, the first of the following lines is legal at server startup,
but the second is not:

     shell> mysql --max_allowed_packet=16M
     shell> mysql --max_allowed_packet=16*1024*1024

Conversely, the second of the following lines is legal at runtime, but
the first is not:

     mysql> SET GLOBAL max_allowed_packet=16M;
     mysql> SET GLOBAL max_allowed_packet=16*1024*1024;

*Note*:

Some system variables can be enabled with the *Note `SET':
set-statement.  statement by setting them to `ON' or `1', or disabled
by setting them to `OFF' or `0'. However, to set such a variable on the
command line or in an option file, you must set it to `1' or `0';
setting it to `ON' or `OFF' will not work. For example, on the command
line, `--delay_key_write=1' works but `--delay_key_write=ON' does not.

To display system variable names and values, use the *Note `SHOW
VARIABLES': show-variables. statement:

     mysql> SHOW VARIABLES;
     +---------------------------------+-----------------------------------+
     | Variable_name                   | Value                             |
     +---------------------------------+-----------------------------------+
     | auto_increment_increment        | 1                                 |
     | auto_increment_offset           | 1                                 |
     | automatic_sp_privileges         | ON                                |
     | back_log                        | 50                                |
     | basedir                         | /home/mysql/                      |
     | binlog_cache_size               | 32768                             |
     | bulk_insert_buffer_size         | 8388608                           |
     | character_set_client            | latin1                            |
     | character_set_connection        | latin1                            |
     | character_set_database          | latin1                            |
     | character_set_results           | latin1                            |
     | character_set_server            | latin1                            |
     | character_set_system            | utf8                              |
     | character_sets_dir              | /home/mysql/share/mysql/charsets/ |
     | collation_connection            | latin1_swedish_ci                 |
     | collation_database              | latin1_swedish_ci                 |
     | collation_server                | latin1_swedish_ci                 |
     ...
     | innodb_additional_mem_pool_size | 1048576                           |
     | innodb_autoextend_increment     | 8                                 |
     | innodb_buffer_pool_size         | 8388608                           |
     | innodb_checksums                | ON                                |
     | innodb_commit_concurrency       | 0                                 |
     | innodb_concurrency_tickets      | 500                               |
     | innodb_data_file_path           | ibdata1:10M:autoextend            |
     | innodb_data_home_dir            |                                   |
     ...
     | version                         | 5.1.6-alpha-log                   |
     | version_comment                 | Source distribution               |
     | version_compile_machine         | i686                              |
     | version_compile_os              | suse-linux                        |
     | wait_timeout                    | 28800                             |
     +---------------------------------+-----------------------------------+

With a `LIKE' clause, the statement displays only those variables that
match the pattern. To obtain a specific variable name, use a `LIKE'
clause as shown:

     SHOW VARIABLES LIKE 'max_join_size';
     SHOW SESSION VARIABLES LIKE 'max_join_size';

To get a list of variables whose name match a pattern, use the ``%''
wildcard character in a `LIKE' clause:

     SHOW VARIABLES LIKE '%size%';
     SHOW GLOBAL VARIABLES LIKE '%size%';

Wildcard characters can be used in any position within the pattern to
be matched. Strictly speaking, because ``_'' is a wildcard that matches
any single character, you should escape it as ``\_'' to match it
literally. In practice, this is rarely necessary.

For *Note `SHOW VARIABLES': show-variables, if you specify neither
`GLOBAL' nor `SESSION', MySQL returns `SESSION' values.

The reason for requiring the `GLOBAL' keyword when setting
`GLOBAL'-only variables but not when retrieving them is to prevent
problems in the future. If we were to remove a `SESSION' variable that
has the same name as a `GLOBAL' variable, a client with the `SUPER'
privilege might accidentally change the `GLOBAL' variable rather than
just the `SESSION' variable for its own connection. If we add a
`SESSION' variable with the same name as a `GLOBAL' variable, a client
that intends to change the `GLOBAL' variable might find only its own
`SESSION' variable changed.


File: manual.info,  Node: structured-system-variables,  Next: dynamic-system-variables,  Prev: using-system-variables,  Up: using-system-variables

5.1.5.1 Structured System Variables
...................................

A structured variable differs from a regular system variable in two
respects:

   * Its value is a structure with components that specify server
     parameters considered to be closely related.

   * There might be several instances of a given type of structured
     variable. Each one has a different name and refers to a different
     resource maintained by the server.

MySQL 5.5 supports one structured variable type, which specifies
parameters governing the operation of key caches. A key cache
structured variable has these components:

   * `key_buffer_size'

   * `key_cache_block_size'

   * `key_cache_division_limit'

   * `key_cache_age_threshold'

This section describes the syntax for referring to structured
variables. Key cache variables are used for syntax examples, but
specific details about how key caches operate are found elsewhere, in
*Note myisam-key-cache::.

To refer to a component of a structured variable instance, you can use
a compound name in INSTANCE_NAME.COMPONENT_NAME format.  Examples:

     hot_cache.key_buffer_size
     hot_cache.key_cache_block_size
     cold_cache.key_cache_block_size

For each structured system variable, an instance with the name of
`default' is always predefined. If you refer to a component of a
structured variable without any instance name, the `default' instance
is used. Thus, `default.key_buffer_size' and `key_buffer_size' both
refer to the same system variable.

Structured variable instances and components follow these naming rules:

   * For a given type of structured variable, each instance must have a
     name that is unique _within_ variables of that type. However,
     instance names need not be unique _across_ structured variable
     types. For example, each structured variable has an instance named
     `default', so `default' is not unique across variable types.

   * The names of the components of each structured variable type must
     be unique across all system variable names. If this were not true
     (that is, if two different types of structured variables could
     share component member names), it would not be clear which default
     structured variable to use for references to member names that are
     not qualified by an instance name.

   * If a structured variable instance name is not legal as an unquoted
     identifier, refer to it as a quoted identifier using backticks.
     For example, `hot-cache' is not legal, but ``hot-cache`' is.

   * `global', `session', and `local' are not legal instance names. This
     avoids a conflict with notation such as `@@global.VAR_NAME' for
     referring to nonstructured system variables.

Currently, the first two rules have no possibility of being violated
because the only structured variable type is the one for key caches.
These rules will assume greater significance if some other type of
structured variable is created in the future.

With one exception, you can refer to structured variable components
using compound names in any context where simple variable names can
occur. For example, you can assign a value to a structured variable
using a command-line option:

     shell> mysqld --hot_cache.key_buffer_size=64K

In an option file, use this syntax:

     [mysqld]
     hot_cache.key_buffer_size=64K

If you start the server with this option, it creates a key cache named
`hot_cache' with a size of 64KB in addition to the default key cache
that has a default size of 8MB.

Suppose that you start the server as follows:

     shell> mysqld --key_buffer_size=256K \
              --extra_cache.key_buffer_size=128K \
              --extra_cache.key_cache_block_size=2048

In this case, the server sets the size of the default key cache to
256KB. (You could also have written `--default.key_buffer_size=256K'.)
In addition, the server creates a second key cache named `extra_cache'
that has a size of 128KB, with the size of block buffers for caching
table index blocks set to 2048 bytes.

The following example starts the server with three different key caches
having sizes in a 3:1:1 ratio:

     shell> mysqld --key_buffer_size=6M \
              --hot_cache.key_buffer_size=2M \
              --cold_cache.key_buffer_size=2M

Structured variable values may be set and retrieved at runtime as well.
For example, to set a key cache named `hot_cache' to a size of 10MB,
use either of these statements:

     mysql> SET GLOBAL hot_cache.key_buffer_size = 10*1024*1024;
     mysql> SET @@global.hot_cache.key_buffer_size = 10*1024*1024;

To retrieve the cache size, do this:

     mysql> SELECT @@global.hot_cache.key_buffer_size;

However, the following statement does not work. The variable is not
interpreted as a compound name, but as a simple string for a `LIKE'
pattern-matching operation:

     mysql> SHOW GLOBAL VARIABLES LIKE 'hot_cache.key_buffer_size';

This is the exception to being able to use structured variable names
anywhere a simple variable name may occur.


File: manual.info,  Node: dynamic-system-variables,  Prev: structured-system-variables,  Up: using-system-variables

5.1.5.2 Dynamic System Variables
................................

Many server system variables are dynamic and can be set at runtime
using *Note `SET GLOBAL': set-statement. or *Note `SET SESSION':
set-statement. You can also obtain their values using *Note `SELECT':
select. See *Note using-system-variables::.

The following table shows the full list of all dynamic system
variables. The last column indicates for each variable whether `GLOBAL'
or `SESSION' (or both) apply. The table also lists session options that
can be set with the *Note `SET': set-statement.  statement. *Note
server-system-variables::, discusses these options.

Variables that have a type of `string' take a string value. Variables
that have a type of `numeric' take a numeric value. Variables that have
a type of `boolean' can be set to 0, 1, `ON' or `OFF'. (If you set them
on the command line or in an option file, use the numeric values.)
Variables that are marked as `enumeration' normally should be set to
one of the available values for the variable, but can also be set to
the number that corresponds to the desired enumeration value. For
enumerated system variables, the first enumeration value corresponds to
0. This differs from *Note `ENUM': enum. columns, for which the first
enumeration value corresponds to 1.

*Dynamic Variable Summary*

Variable Name                 Variable Type  Variable Scope
`audit_log_flush'             boolean        `GLOBAL'
`audit_log_policy'            enumeration    `GLOBAL'
`audit_log_rotate_on_size'    numeric        `GLOBAL'
`auto_increment_increment'    numeric        `GLOBAL' |
                                             `SESSION'
`auto_increment_offset'       numeric        `GLOBAL' |
                                             `SESSION'
`autocommit'                  boolean        `GLOBAL' |
                                             `SESSION'
`automatic_sp_privileges'     boolean        `GLOBAL'
`big_tables'                  boolean        `GLOBAL' |
                                             `SESSION'
`binlog_cache_size'           numeric        `GLOBAL'
`binlog_direct_non_transactional_updates'boolean        `GLOBAL' |
                                             `SESSION'
`binlog_format'               enumeration    `GLOBAL' |
                                             `SESSION'
`binlog_stmt_cache_size'      numeric        `GLOBAL'
`bulk_insert_buffer_size'     numeric        `GLOBAL' |
                                             `SESSION'
`character_set_client'        string         `GLOBAL' |
                                             `SESSION'
`character_set_connection'    string         `GLOBAL' |
                                             `SESSION'
`character_set_database'      string         `GLOBAL' |
                                             `SESSION'
`character_set_filesystem'    string         `GLOBAL' |
                                             `SESSION'
`character_set_results'       string         `GLOBAL' |
                                             `SESSION'
`character_set_server'        string         `GLOBAL' |
                                             `SESSION'
`collation_connection'        string         `GLOBAL' |
                                             `SESSION'
`collation_database'          string         `GLOBAL' |
                                             `SESSION'
`collation_server'            string         `GLOBAL' |
                                             `SESSION'
`completion_type'             numeric        `GLOBAL' |
                                             `SESSION'
`concurrent_insert'           boolean        `GLOBAL'
`connect_timeout'             numeric        `GLOBAL'
`debug'                       string         `GLOBAL' |
                                             `SESSION'
`debug_sync'                  string         `SESSION'
`default_storage_engine'      enumeration    `GLOBAL' |
                                             `SESSION'
`default_week_format'         numeric        `GLOBAL' |
                                             `SESSION'
`delay_key_write'             enumeration    `GLOBAL'
`delayed_insert_limit'        numeric        `GLOBAL'
`delayed_insert_timeout'      numeric        `GLOBAL'
`delayed_queue_size'          numeric        `GLOBAL'
`div_precision_increment'     numeric        `GLOBAL' |
                                             `SESSION'
`engine_condition_pushdown'   boolean        `GLOBAL' |
                                             `SESSION'
`event_scheduler'             enumeration    `GLOBAL'
`expire_logs_days'            numeric        `GLOBAL'
`flush'                       boolean        `GLOBAL'
`flush_time'                  numeric        `GLOBAL'
`foreign_key_checks'          boolean        `GLOBAL' |
                                             `SESSION'
`ft_boolean_syntax'           string         `GLOBAL'
`general_log'                 boolean        `GLOBAL'
`general_log_file'            filename       `GLOBAL'
`group_concat_max_len'        numeric        `GLOBAL' |
                                             `SESSION'
`identity'                    numeric        `SESSION'
`init_connect'                string         `GLOBAL'
`init_slave'                  string         `GLOBAL'
`innodb_adaptive_flushing'    boolean        `GLOBAL'
`innodb_adaptive_hash_index'  boolean        `GLOBAL'
`innodb_autoextend_increment' numeric        `GLOBAL'
`innodb_change_buffering'     enumeration    `GLOBAL'
`innodb_commit_concurrency'   numeric        `GLOBAL'
`innodb_concurrency_tickets'  numeric        `GLOBAL'
`innodb_fast_shutdown'        numeric        `GLOBAL'
`innodb_file_format'          string         `GLOBAL'
`innodb_file_format_max'      string         `GLOBAL'
`innodb_file_per_table'       boolean        `GLOBAL'
`innodb_flush_log_at_trx_commit'enumeration    `GLOBAL'
`innodb_io_capacity'          numeric        `GLOBAL'
`innodb_large_prefix'         boolean        `GLOBAL'
`innodb_lock_wait_timeout'    numeric        `GLOBAL' |
                                             `SESSION'
`innodb_max_dirty_pages_pct'  numeric        `GLOBAL'
`innodb_max_purge_lag'        numeric        `GLOBAL'
`innodb_old_blocks_pct'       numeric        `GLOBAL'
`innodb_old_blocks_time'      numeric        `GLOBAL'
`innodb_print_all_deadlocks'  boolean        `GLOBAL'
`innodb_purge_batch_size'     numeric        `GLOBAL'
`innodb_random_read_ahead'    boolean        `GLOBAL'
`innodb_read_ahead_threshold' numeric        `GLOBAL'
`innodb_replication_delay'    numeric        `GLOBAL'
`innodb_rollback_segments'    numeric        `GLOBAL'
`innodb_spin_wait_delay'      numeric        `GLOBAL'
`innodb_stats_method'         enumeration    `GLOBAL'
`innodb_stats_on_metadata'    boolean        `GLOBAL'
`innodb_stats_sample_pages'   numeric        `GLOBAL'
`innodb_strict_mode'          boolean        `GLOBAL' |
                                             `SESSION'
`innodb_support_xa'           boolean        `GLOBAL' |
                                             `SESSION'
`innodb_sync_spin_loops'      numeric        `GLOBAL'
`innodb_table_locks'          boolean        `GLOBAL' |
                                             `SESSION'
`innodb_thread_concurrency'   numeric        `GLOBAL'
`innodb_thread_sleep_delay'   numeric        `GLOBAL'
`insert_id'                   numeric        `SESSION'
`interactive_timeout'         numeric        `GLOBAL' |
                                             `SESSION'
`join_buffer_size'            numeric        `GLOBAL' |
                                             `SESSION'
`keep_files_on_create'        boolean        `GLOBAL' |
                                             `SESSION'
`key_buffer_size'             numeric        `GLOBAL'
`key_cache_age_threshold'     numeric        `GLOBAL'
`key_cache_block_size'        numeric        `GLOBAL'
`key_cache_division_limit'    numeric        `GLOBAL'
`last_insert_id'              numeric        `SESSION'
`lc_messages'                 string         `GLOBAL' |
                                             `SESSION'
`lc_time_names'               string         `GLOBAL' |
                                             `SESSION'
`local_infile'                boolean        `GLOBAL'
`lock_wait_timeout'           numeric        `GLOBAL' |
                                             `SESSION'
`log'                         string         `GLOBAL'
`log_bin_trust_function_creators'boolean        `GLOBAL'
`log_bin_trust_routine_creators'boolean        `GLOBAL'
`log_output'                  set            `GLOBAL'
`log_queries_not_using_indexes'boolean        `GLOBAL'
`log_slow_queries'            boolean        `GLOBAL'
`log_warnings'                numeric        `GLOBAL' |
                                             `SESSION'
`long_query_time'             numeric        `GLOBAL' |
                                             `SESSION'
`low_priority_updates'        boolean        `GLOBAL' |
                                             `SESSION'
`max_allowed_packet'          numeric        `GLOBAL'
`max_binlog_cache_size'       numeric        `GLOBAL'
`max_binlog_size'             numeric        `GLOBAL'
`max_binlog_stmt_cache_size'  numeric        `GLOBAL'
`max_connect_errors'          numeric        `GLOBAL'
`max_connections'             numeric        `GLOBAL'
`max_delayed_threads'         numeric        `GLOBAL' |
                                             `SESSION'
`max_error_count'             numeric        `GLOBAL' |
                                             `SESSION'
`max_heap_table_size'         numeric        `GLOBAL' |
                                             `SESSION'
`max_insert_delayed_threads'  numeric        `GLOBAL' |
                                             `SESSION'
`max_join_size'               numeric        `GLOBAL' |
                                             `SESSION'
`max_length_for_sort_data'    numeric        `GLOBAL' |
                                             `SESSION'
`max_prepared_stmt_count'     numeric        `GLOBAL'
`max_relay_log_size'          numeric        `GLOBAL'
`max_seeks_for_key'           numeric        `GLOBAL' |
                                             `SESSION'
`max_sort_length'             numeric        `GLOBAL' |
                                             `SESSION'
`max_sp_recursion_depth'      numeric        `GLOBAL' |
                                             `SESSION'
`max_user_connections'        numeric        `GLOBAL' |
                                             `SESSION'
`max_write_lock_count'        numeric        `GLOBAL'
`min_examined_row_limit'      numeric        `GLOBAL' |
                                             `SESSION'
`myisam_data_pointer_size'    numeric        `GLOBAL'
`myisam_max_sort_file_size'   numeric        `GLOBAL'
`myisam_repair_threads'       numeric        `GLOBAL' |
                                             `SESSION'
`myisam_sort_buffer_size'     numeric        `GLOBAL' |
                                             `SESSION'
`myisam_stats_method'         enumeration    `GLOBAL' |
                                             `SESSION'
`myisam_use_mmap'             boolean        `GLOBAL'
`ndb_autoincrement_prefetch_sz'numeric        `GLOBAL' |
                                             `SESSION'
`ndb_blob_read_batch_bytes'   numeric        `GLOBAL' |
                                             `SESSION'
`ndb_blob_write_batch_bytes'  numeric        `GLOBAL' |
                                             `SESSION'
`ndb_cache_check_time'        numeric        `GLOBAL'
`ndb_deferred_constraints'    integer        `GLOBAL' |
                                             `SESSION'
`ndb_deferred_constraints'    integer        `GLOBAL' |
                                             `SESSION'
`ndb_distribution={KEYHASH|LINHASH}'enumeration    `GLOBAL' |
                                             `SESSION'
`ndb_distribution'            enumeration    `GLOBAL' |
                                             `SESSION'
`ndb_extra_logging'           numeric        `GLOBAL'
`ndb_force_send'              boolean        `GLOBAL' |
                                             `SESSION'
`ndb_log_bin'                 boolean        `GLOBAL' |
                                             `SESSION'
`ndb_log_binlog_index'        boolean        `GLOBAL'
`ndb_log_empty_epochs'        boolean        `GLOBAL'
`ndb_log_empty_epochs'        boolean        `GLOBAL'
`ndb_log_update_as_write'     boolean        `GLOBAL'
`ndb_log_updated_only'        boolean        `GLOBAL'
`ndb_optimization_delay'      numeric        `GLOBAL'
`ndb_table_no_logging'        boolean        `SESSION'
`ndb_table_temporary'         boolean        `SESSION'
`ndb_use_exact_count'         boolean        `GLOBAL' |
                                             `SESSION'
`ndb_use_transactions'        boolean        `GLOBAL' |
                                             `SESSION'
`ndbinfo_max_bytes'           numeric        `GLOBAL' |
                                             `SESSION'
`ndbinfo_max_rows'            numeric        `GLOBAL' |
                                             `SESSION'
`ndbinfo_show_hidden'         boolean        `GLOBAL' |
                                             `SESSION'
`ndbinfo_table_prefix'        string         `GLOBAL' |
                                             `SESSION'
`net_buffer_length'           numeric        `GLOBAL' |
                                             `SESSION'
`net_read_timeout'            numeric        `GLOBAL' |
                                             `SESSION'
`net_retry_count'             numeric        `GLOBAL' |
                                             `SESSION'
`net_write_timeout'           numeric        `GLOBAL' |
                                             `SESSION'
`new'                         boolean        `GLOBAL' |
                                             `SESSION'
`old_alter_table'             boolean        `GLOBAL' |
                                             `SESSION'
`old_passwords'               boolean        `GLOBAL' |
                                             `SESSION'
`optimizer_prune_level'       boolean        `GLOBAL' |
                                             `SESSION'
`optimizer_search_depth'      numeric        `GLOBAL' |
                                             `SESSION'
`optimizer_switch'            set            `GLOBAL' |
                                             `SESSION'
`preload_buffer_size'         numeric        `GLOBAL' |
                                             `SESSION'
`profiling'                   boolean        `GLOBAL' |
                                             `SESSION'
`profiling_history_size'      numeric        `GLOBAL' |
                                             `SESSION'
`pseudo_slave_mode'           numeric        `SESSION'
`pseudo_thread_id'            numeric        `SESSION'
`query_alloc_block_size'      numeric        `GLOBAL' |
                                             `SESSION'
`query_cache_limit'           numeric        `GLOBAL'
`query_cache_min_res_unit'    numeric        `GLOBAL'
`query_cache_size'            numeric        `GLOBAL'
`query_cache_type'            enumeration    `GLOBAL' |
                                             `SESSION'
`query_cache_wlock_invalidate'boolean        `GLOBAL' |
                                             `SESSION'
`query_prealloc_size'         numeric        `GLOBAL' |
                                             `SESSION'
`rand_seed1'                  numeric        `SESSION'
`rand_seed2'                  numeric        `SESSION'
`range_alloc_block_size'      numeric        `GLOBAL' |
                                             `SESSION'
`read_buffer_size'            numeric        `GLOBAL' |
                                             `SESSION'
`read_only'                   boolean        `GLOBAL'
`read_rnd_buffer_size'        numeric        `GLOBAL' |
                                             `SESSION'
`relay_log_purge'             boolean        `GLOBAL'
`rpl_recovery_rank'           numeric        `GLOBAL'
`rpl_semi_sync_master_enabled'boolean        `GLOBAL'
`rpl_semi_sync_master_timeout'numeric        `GLOBAL'
`rpl_semi_sync_master_trace_level'numeric        `GLOBAL'
`rpl_semi_sync_master_wait_no_slave'boolean        `GLOBAL'
`rpl_semi_sync_slave_enabled' boolean        `GLOBAL'
`rpl_semi_sync_slave_trace_level'numeric        `GLOBAL'
`safe_show_database'          boolean        `GLOBAL'
`secure_auth'                 boolean        `GLOBAL'
`server_id'                   numeric        `GLOBAL'
`slave_allow_batching'        boolean        `GLOBAL'
`slave_compressed_protocol'   boolean        `GLOBAL'
`slave_exec_mode'             enumeration    `GLOBAL'
`slave_max_allowed_packet'    numeric        `GLOBAL'
`slave_net_timeout'           numeric        `GLOBAL'
`slave_transaction_retries'   numeric        `GLOBAL'
`slow_launch_time'            numeric        `GLOBAL'
`slow_query_log'              boolean        `GLOBAL'
`slow_query_log_file'         filename       `GLOBAL'
`sort_buffer_size'            numeric        `GLOBAL' |
                                             `SESSION'
`sql_auto_is_null'            boolean        `GLOBAL' |
                                             `SESSION'
`sql_big_selects'             boolean        `GLOBAL' |
                                             `SESSION'
`sql_big_tables'              boolean        `GLOBAL' |
                                             `SESSION'
`sql_buffer_result'           boolean        `GLOBAL' |
                                             `SESSION'
`sql_log_bin'                 boolean        `GLOBAL' |
                                             `SESSION'
`sql_log_off'                 boolean        `GLOBAL' |
                                             `SESSION'
`sql_log_update'              boolean        `SESSION'
`sql_low_priority_updates'    boolean        `GLOBAL' |
                                             `SESSION'
`sql_max_join_size'           numeric        `GLOBAL' |
                                             `SESSION'
`sql_mode'                    set            `GLOBAL' |
                                             `SESSION'
`sql_notes'                   boolean        `GLOBAL' |
                                             `SESSION'
`sql_quote_show_create'       boolean        `GLOBAL' |
                                             `SESSION'
`sql_safe_updates'            boolean        `GLOBAL' |
                                             `SESSION'
`sql_select_limit'            numeric        `GLOBAL' |
                                             `SESSION'
`sql_slave_skip_counter'      numeric        `GLOBAL'
`sql_warnings'                boolean        `GLOBAL' |
                                             `SESSION'
`storage_engine'              enumeration    `GLOBAL' |
                                             `SESSION'
`stored_program_cache'        numeric        `GLOBAL'
`sync_binlog'                 numeric        `GLOBAL'
`sync_frm'                    boolean        `GLOBAL'
`sync_master_info'            numeric        `GLOBAL'
`sync_relay_log'              numeric        `GLOBAL'
`sync_relay_log_info'         numeric        `GLOBAL'
`table_definition_cache'      numeric        `GLOBAL'
`table_lock_wait_timeout'     numeric        `GLOBAL'
`table_open_cache'            numeric        `GLOBAL'
`table_type'                  enumeration    `GLOBAL' |
                                             `SESSION'
`thread_cache_size'           numeric        `GLOBAL'
`thread_pool_high_priority_connection'numeric        `GLOBAL' |
                                             `SESSION'
`thread_pool_max_unused_threads'numeric        `GLOBAL'
`thread_pool_prio_kickup_timer'numeric        `GLOBAL' |
                                             `SESSION'
`thread_pool_stall_limit'     numeric        `GLOBAL'
`time_zone'                   string         `GLOBAL' |
                                             `SESSION'
`timed_mutexes'               boolean        `GLOBAL'
`timestamp'                   numeric        `SESSION'
`tmp_table_size'              numeric        `GLOBAL' |
                                             `SESSION'
`transaction_alloc_block_size'numeric        `GLOBAL' |
                                             `SESSION'
`transaction_allow_batching'  boolean        `SESSION'
`transaction_prealloc_size'   numeric        `GLOBAL' |
                                             `SESSION'
`tx_isolation'                enumeration    `GLOBAL' |
                                             `SESSION'
`unique_checks'               boolean        `GLOBAL' |
                                             `SESSION'
`updatable_views_with_limit'  boolean        `GLOBAL' |
                                             `SESSION'
`wait_timeout'                numeric        `GLOBAL' |
                                             `SESSION'


File: manual.info,  Node: server-status-variables,  Next: server-sql-mode,  Prev: using-system-variables,  Up: mysqld-server

5.1.6 Server Status Variables
-----------------------------

The server maintains many status variables that provide information
about its operation. You can view these variables and their values by
using the `SHOW [GLOBAL | SESSION] STATUS' statement (see *Note
show-status::).  The optional `GLOBAL' keyword aggregates the values
over all connections, and `SESSION' shows the values for the current
connection.

     mysql> SHOW GLOBAL STATUS;
     +-----------------------------------+------------+
     | Variable_name                     | Value      |
     +-----------------------------------+------------+
     | Aborted_clients                   | 0          |
     | Aborted_connects                  | 0          |
     | Bytes_received                    | 155372598  |
     | Bytes_sent                        | 1176560426 |
     ...
     | Connections                       | 30023      |
     | Created_tmp_disk_tables           | 0          |
     | Created_tmp_files                 | 3          |
     | Created_tmp_tables                | 2          |
     ...
     | Threads_created                   | 217        |
     | Threads_running                   | 88         |
     | Uptime                            | 1389872    |
     +-----------------------------------+------------+

Many status variables are reset to 0 by the *Note `FLUSH STATUS': flush.
statement.

The following table lists all available server status variables:

*Status Variable Summary*

Variable Name                 Variable Type  Variable Scope
`Aborted_clients'             numeric        `GLOBAL'
`Aborted_connects'            numeric        `GLOBAL'
`Binlog_cache_disk_use'       numeric        `GLOBAL'
`Binlog_cache_use'            numeric        `GLOBAL'
`Binlog_stmt_cache_disk_use'  numeric        `GLOBAL'
`Binlog_stmt_cache_use'       numeric        `GLOBAL'
`Bytes_received'              numeric        `GLOBAL' |
                                             `SESSION'
`Bytes_sent'                  numeric        `GLOBAL' |
                                             `SESSION'
`Com_admin_commands'          numeric        `GLOBAL' |
                                             `SESSION'
`Com_alter_db'                numeric        `GLOBAL' |
                                             `SESSION'
`Com_alter_db_upgrade'        numeric        `GLOBAL' |
                                             `SESSION'
`Com_alter_event'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_alter_function'          numeric        `GLOBAL' |
                                             `SESSION'
`Com_alter_procedure'         numeric        `GLOBAL' |
                                             `SESSION'
`Com_alter_server'            numeric        `GLOBAL' |
                                             `SESSION'
`Com_alter_table'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_alter_tablespace'        numeric        `GLOBAL' |
                                             `SESSION'
`Com_analyze'                 numeric        `GLOBAL' |
                                             `SESSION'
`Com_assign_to_keycache'      numeric        `GLOBAL' |
                                             `SESSION'
`Com_begin'                   numeric        `GLOBAL' |
                                             `SESSION'
`Com_binlog'                  numeric        `GLOBAL' |
                                             `SESSION'
`Com_call_procedure'          numeric        `GLOBAL' |
                                             `SESSION'
`Com_change_db'               numeric        `GLOBAL' |
                                             `SESSION'
`Com_change_master'           numeric        `GLOBAL' |
                                             `SESSION'
`Com_check'                   numeric        `GLOBAL' |
                                             `SESSION'
`Com_checksum'                numeric        `GLOBAL' |
                                             `SESSION'
`Com_commit'                  numeric        `GLOBAL' |
                                             `SESSION'
`Com_create_db'               numeric        `GLOBAL' |
                                             `SESSION'
`Com_create_event'            numeric        `GLOBAL' |
                                             `SESSION'
`Com_create_function'         numeric        `GLOBAL' |
                                             `SESSION'
`Com_create_index'            numeric        `GLOBAL' |
                                             `SESSION'
`Com_create_procedure'        numeric        `GLOBAL' |
                                             `SESSION'
`Com_create_server'           numeric        `GLOBAL' |
                                             `SESSION'
`Com_create_table'            numeric        `GLOBAL' |
                                             `SESSION'
`Com_create_trigger'          numeric        `GLOBAL' |
                                             `SESSION'
`Com_create_udf'              numeric        `GLOBAL' |
                                             `SESSION'
`Com_create_user'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_create_view'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_dealloc_sql'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_delete'                  numeric        `GLOBAL' |
                                             `SESSION'
`Com_delete_multi'            numeric        `GLOBAL' |
                                             `SESSION'
`Com_do'                      numeric        `GLOBAL' |
                                             `SESSION'
`Com_drop_db'                 numeric        `GLOBAL' |
                                             `SESSION'
`Com_drop_event'              numeric        `GLOBAL' |
                                             `SESSION'
`Com_drop_function'           numeric        `GLOBAL' |
                                             `SESSION'
`Com_drop_index'              numeric        `GLOBAL' |
                                             `SESSION'
`Com_drop_procedure'          numeric        `GLOBAL' |
                                             `SESSION'
`Com_drop_server'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_drop_table'              numeric        `GLOBAL' |
                                             `SESSION'
`Com_drop_trigger'            numeric        `GLOBAL' |
                                             `SESSION'
`Com_drop_user'               numeric        `GLOBAL' |
                                             `SESSION'
`Com_drop_view'               numeric        `GLOBAL' |
                                             `SESSION'
`Com_empty_query'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_execute_sql'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_flush'                   numeric        `GLOBAL' |
                                             `SESSION'
`Com_grant'                   numeric        `GLOBAL' |
                                             `SESSION'
`Com_ha_close'                numeric        `GLOBAL' |
                                             `SESSION'
`Com_ha_open'                 numeric        `GLOBAL' |
                                             `SESSION'
`Com_ha_read'                 numeric        `GLOBAL' |
                                             `SESSION'
`Com_help'                    numeric        `GLOBAL' |
                                             `SESSION'
`Com_insert'                  numeric        `GLOBAL' |
                                             `SESSION'
`Com_insert_select'           numeric        `GLOBAL' |
                                             `SESSION'
`Com_install_plugin'          numeric        `GLOBAL' |
                                             `SESSION'
`Com_kill'                    numeric        `GLOBAL' |
                                             `SESSION'
`Com_load'                    numeric        `GLOBAL' |
                                             `SESSION'
`Com_lock_tables'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_optimize'                numeric        `GLOBAL' |
                                             `SESSION'
`Com_preload_keys'            numeric        `GLOBAL' |
                                             `SESSION'
`Com_prepare_sql'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_purge'                   numeric        `GLOBAL' |
                                             `SESSION'
`Com_purge_before_date'       numeric        `GLOBAL' |
                                             `SESSION'
`Com_release_savepoint'       numeric        `GLOBAL' |
                                             `SESSION'
`Com_rename_table'            numeric        `GLOBAL' |
                                             `SESSION'
`Com_rename_user'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_repair'                  numeric        `GLOBAL' |
                                             `SESSION'
`Com_replace'                 numeric        `GLOBAL' |
                                             `SESSION'
`Com_replace_select'          numeric        `GLOBAL' |
                                             `SESSION'
`Com_reset'                   numeric        `GLOBAL' |
                                             `SESSION'
`Com_resignal'                numeric        `GLOBAL' |
                                             `SESSION'
`Com_revoke'                  numeric        `GLOBAL' |
                                             `SESSION'
`Com_revoke_all'              numeric        `GLOBAL' |
                                             `SESSION'
`Com_rollback'                numeric        `GLOBAL' |
                                             `SESSION'
`Com_rollback_to_savepoint'   numeric        `GLOBAL' |
                                             `SESSION'
`Com_savepoint'               numeric        `GLOBAL' |
                                             `SESSION'
`Com_select'                  numeric        `GLOBAL' |
                                             `SESSION'
`Com_set_option'              numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_authors'            numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_binlog_events'      numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_binlogs'            numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_charsets'           numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_collations'         numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_contributors'       numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_create_db'          numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_create_event'       numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_create_func'        numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_create_proc'        numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_create_table'       numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_create_trigger'     numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_databases'          numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_engine_logs'        numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_engine_mutex'       numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_engine_status'      numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_errors'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_events'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_fields'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_function_code'      numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_function_status'    numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_grants'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_keys'               numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_master_status'      numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_ndb_status'         numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_new_master'         numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_open_tables'        numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_plugins'            numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_privileges'         numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_procedure_code'     numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_procedure_status'   numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_processlist'        numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_profile'            numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_profiles'           numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_relaylog_events'    numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_slave_hosts'        numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_slave_status'       numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_status'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_storage_engines'    numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_table_status'       numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_tables'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_triggers'           numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_variables'          numeric        `GLOBAL' |
                                             `SESSION'
`Com_show_warnings'           numeric        `GLOBAL' |
                                             `SESSION'
`Com_signal'                  numeric        `GLOBAL' |
                                             `SESSION'
`Com_slave_start'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_slave_stop'              numeric        `GLOBAL' |
                                             `SESSION'
`Com_stmt_close'              numeric        `GLOBAL' |
                                             `SESSION'
`Com_stmt_execute'            numeric        `GLOBAL' |
                                             `SESSION'
`Com_stmt_fetch'              numeric        `GLOBAL' |
                                             `SESSION'
`Com_stmt_prepare'            numeric        `GLOBAL' |
                                             `SESSION'
`Com_stmt_reprepare'          numeric        `GLOBAL' |
                                             `SESSION'
`Com_stmt_reset'              numeric        `GLOBAL' |
                                             `SESSION'
`Com_stmt_send_long_data'     numeric        `GLOBAL' |
                                             `SESSION'
`Com_truncate'                numeric        `GLOBAL' |
                                             `SESSION'
`Com_uninstall_plugin'        numeric        `GLOBAL' |
                                             `SESSION'
`Com_unlock_tables'           numeric        `GLOBAL' |
                                             `SESSION'
`Com_update'                  numeric        `GLOBAL' |
                                             `SESSION'
`Com_update_multi'            numeric        `GLOBAL' |
                                             `SESSION'
`Com_xa_commit'               numeric        `GLOBAL' |
                                             `SESSION'
`Com_xa_end'                  numeric        `GLOBAL' |
                                             `SESSION'
`Com_xa_prepare'              numeric        `GLOBAL' |
                                             `SESSION'
`Com_xa_recover'              numeric        `GLOBAL' |
                                             `SESSION'
`Com_xa_rollback'             numeric        `GLOBAL' |
                                             `SESSION'
`Com_xa_start'                numeric        `GLOBAL' |
                                             `SESSION'
`Compression'                 numeric        `SESSION'
`Connections'                 numeric        `GLOBAL'
`Created_tmp_disk_tables'     numeric        `GLOBAL' |
                                             `SESSION'
`Created_tmp_files'           numeric        `GLOBAL'
`Created_tmp_tables'          numeric        `GLOBAL' |
                                             `SESSION'
`Delayed_errors'              numeric        `GLOBAL'
`Delayed_insert_threads'      numeric        `GLOBAL'
`Delayed_writes'              numeric        `GLOBAL'
`Flush_commands'              numeric        `GLOBAL'
`Handler_commit'              numeric        `GLOBAL' |
                                             `SESSION'
`Handler_delete'              numeric        `GLOBAL' |
                                             `SESSION'
`Handler_discover'            numeric        `GLOBAL' |
                                             `SESSION'
`Handler_prepare'             numeric        `GLOBAL' |
                                             `SESSION'
`Handler_read_first'          numeric        `GLOBAL' |
                                             `SESSION'
`Handler_read_key'            numeric        `GLOBAL' |
                                             `SESSION'
`Handler_read_last'           numeric        `GLOBAL' |
                                             `SESSION'
`Handler_read_next'           numeric        `GLOBAL' |
                                             `SESSION'
`Handler_read_prev'           numeric        `GLOBAL' |
                                             `SESSION'
`Handler_read_rnd'            numeric        `GLOBAL' |
                                             `SESSION'
`Handler_read_rnd_next'       numeric        `GLOBAL' |
                                             `SESSION'
`Handler_rollback'            numeric        `GLOBAL' |
                                             `SESSION'
`Handler_savepoint'           numeric        `GLOBAL' |
                                             `SESSION'
`Handler_savepoint_rollback'  numeric        `GLOBAL' |
                                             `SESSION'
`Handler_update'              numeric        `GLOBAL' |
                                             `SESSION'
`Handler_write'               numeric        `GLOBAL' |
                                             `SESSION'
`Innodb_buffer_pool_bytes_data'numeric        `GLOBAL'
`Innodb_buffer_pool_bytes_dirty'numeric        `GLOBAL'
`Innodb_buffer_pool_pages_data'numeric        `GLOBAL'
`Innodb_buffer_pool_pages_dirty'numeric        `GLOBAL'
`Innodb_buffer_pool_pages_flushed'numeric        `GLOBAL'
`Innodb_buffer_pool_pages_free'numeric        `GLOBAL'
`Innodb_buffer_pool_pages_latched'numeric        `GLOBAL'
`Innodb_buffer_pool_pages_misc'numeric        `GLOBAL'
`Innodb_buffer_pool_pages_total'numeric        `GLOBAL'
`Innodb_buffer_pool_read_ahead'numeric        `GLOBAL'
`Innodb_buffer_pool_read_ahead_evicted'numeric        `GLOBAL'
`Innodb_buffer_pool_read_requests'numeric        `GLOBAL'
`Innodb_buffer_pool_reads'    numeric        `GLOBAL'
`Innodb_buffer_pool_wait_free'numeric        `GLOBAL'
`Innodb_buffer_pool_write_requests'numeric        `GLOBAL'
`Innodb_data_fsyncs'          numeric        `GLOBAL'
`Innodb_data_pending_fsyncs'  numeric        `GLOBAL'
`Innodb_data_pending_reads'   numeric        `GLOBAL'
`Innodb_data_pending_writes'  numeric        `GLOBAL'
`Innodb_data_read'            numeric        `GLOBAL'
`Innodb_data_reads'           numeric        `GLOBAL'
`Innodb_data_writes'          numeric        `GLOBAL'
`Innodb_data_written'         numeric        `GLOBAL'
`Innodb_dblwr_pages_written'  numeric        `GLOBAL'
`Innodb_dblwr_writes'         numeric        `GLOBAL'
`Innodb_have_atomic_builtins' numeric        `GLOBAL'
`Innodb_log_waits'            numeric        `GLOBAL'
`Innodb_log_write_requests'   numeric        `GLOBAL'
`Innodb_log_writes'           numeric        `GLOBAL'
`Innodb_os_log_fsyncs'        numeric        `GLOBAL'
`Innodb_os_log_pending_fsyncs'numeric        `GLOBAL'
`Innodb_os_log_pending_writes'numeric        `GLOBAL'
`Innodb_os_log_written'       numeric        `GLOBAL'
`Innodb_page_size'            numeric        `GLOBAL'
`Innodb_pages_created'        numeric        `GLOBAL'
`Innodb_pages_read'           numeric        `GLOBAL'
`Innodb_pages_written'        numeric        `GLOBAL'
`Innodb_row_lock_current_waits'numeric        `GLOBAL'
`Innodb_row_lock_time'        numeric        `GLOBAL'
`Innodb_row_lock_time_avg'    numeric        `GLOBAL'
`Innodb_row_lock_time_max'    numeric        `GLOBAL'
`Innodb_row_lock_waits'       numeric        `GLOBAL'
`Innodb_rows_deleted'         numeric        `GLOBAL'
`Innodb_rows_inserted'        numeric        `GLOBAL'
`Innodb_rows_read'            numeric        `GLOBAL'
`Innodb_rows_updated'         numeric        `GLOBAL'
`Innodb_truncated_status_writes'numeric        `GLOBAL'
`Key_blocks_not_flushed'      numeric        `GLOBAL'
`Key_blocks_unused'           numeric        `GLOBAL'
`Key_blocks_used'             numeric        `GLOBAL'
`Key_read_requests'           numeric        `GLOBAL'
`Key_reads'                   numeric        `GLOBAL'
`Key_write_requests'          numeric        `GLOBAL'
`Key_writes'                  numeric        `GLOBAL'
`Last_query_cost'             numeric        `SESSION'
`Max_used_connections'        numeric        `GLOBAL'
`Ndb_api_bytes_received_count'numeric        `GLOBAL'
`Ndb_api_bytes_received_count_session'numeric        `SESSION'
`Ndb_api_bytes_received_count_slave'numeric        `GLOBAL'
`Ndb_api_bytes_sent_count'    numeric        `GLOBAL'
`Ndb_api_bytes_sent_count_session'numeric        `SESSION'
`Ndb_api_bytes_sent_count_slave'numeric        `GLOBAL'
`Ndb_api_event_bytes_count'   numeric        `GLOBAL'
`Ndb_api_event_bytes_count_injector'numeric        `GLOBAL'
`Ndb_api_event_data_count'    numeric        `GLOBAL'
`Ndb_api_event_data_count_injector'numeric        `GLOBAL'
`Ndb_api_event_nondata_count' numeric        `GLOBAL'
`Ndb_api_event_nondata_count_injector'numeric        `GLOBAL'
`Ndb_api_pk_op_count'         numeric        `GLOBAL'
`Ndb_api_pk_op_count_session' numeric        `SESSION'
`Ndb_api_pk_op_count_slave'   numeric        `GLOBAL'
`Ndb_api_pruned_scan_count'   numeric        `GLOBAL'
`Ndb_api_pruned_scan_count_session'numeric        `SESSION'
`Ndb_api_pruned_scan_count_slave'numeric        `GLOBAL'
`Ndb_api_range_scan_count'    numeric        `GLOBAL'
`Ndb_api_range_scan_count_session'numeric        `SESSION'
`Ndb_api_range_scan_count_slave'numeric        `GLOBAL'
`Ndb_api_read_row_count'      numeric        `GLOBAL'
`Ndb_api_read_row_count_session'numeric        `SESSION'
`Ndb_api_read_row_count_slave'numeric        `GLOBAL'
`Ndb_api_scan_batch_count'    numeric        `GLOBAL'
`Ndb_api_scan_batch_count_session'numeric        `SESSION'
`Ndb_api_scan_batch_count_slave'numeric        `GLOBAL'
`Ndb_api_table_scan_count'    numeric        `GLOBAL'
`Ndb_api_table_scan_count_session'numeric        `SESSION'
`Ndb_api_table_scan_count_slave'numeric        `GLOBAL'
`Ndb_api_trans_abort_count'   numeric        `GLOBAL'
`Ndb_api_trans_abort_count_session'numeric        `SESSION'
`Ndb_api_trans_abort_count_slave'numeric        `GLOBAL'
`Ndb_api_trans_close_count'   numeric        `GLOBAL'
`Ndb_api_trans_close_count_session'numeric        `SESSION'
`Ndb_api_trans_close_count_slave'numeric        `GLOBAL'
`Ndb_api_trans_commit_count'  numeric        `GLOBAL'
`Ndb_api_trans_commit_count_session'numeric        `SESSION'
`Ndb_api_trans_commit_count_slave'numeric        `GLOBAL'
`Ndb_api_trans_local_read_row_count'numeric        `GLOBAL'
`Ndb_api_trans_local_read_row_count_session'numeric        `SESSION'
`Ndb_api_trans_local_read_row_count_slave'numeric        `GLOBAL'
`Ndb_api_trans_start_count'   numeric        `GLOBAL'
`Ndb_api_trans_start_count_session'numeric        `SESSION'
`Ndb_api_trans_start_count_slave'numeric        `GLOBAL'
`Ndb_api_uk_op_count'         numeric        `GLOBAL'
`Ndb_api_uk_op_count_session' numeric        `SESSION'
`Ndb_api_uk_op_count_slave'   numeric        `GLOBAL'
`Ndb_api_wait_exec_complete_count'numeric        `GLOBAL'
`Ndb_api_wait_exec_complete_count_session'numeric        `SESSION'
`Ndb_api_wait_exec_complete_count_slave'numeric        `GLOBAL'
`Ndb_api_wait_meta_request_count'numeric        `GLOBAL'
`Ndb_api_wait_meta_request_count_session'numeric        `SESSION'
`Ndb_api_wait_meta_request_count_slave'numeric        `GLOBAL'
`Ndb_api_wait_nanos_count'    numeric        `GLOBAL'
`Ndb_api_wait_nanos_count_session'numeric        `SESSION'
`Ndb_api_wait_nanos_count_slave'numeric        `GLOBAL'
`Ndb_api_wait_scan_result_count'numeric        `GLOBAL'
`Ndb_api_wait_scan_result_count_session'numeric        `SESSION'
`Ndb_api_wait_scan_result_count_slave'numeric        `GLOBAL'
`ndb_cluster_connection_pool' numeric        `GLOBAL'
`Ndb_cluster_node_id'         numeric        `GLOBAL' |
                                             `SESSION'
`Ndb_config_from_host'        numeric        `GLOBAL' |
                                             `SESSION'
`Ndb_config_from_port'        numeric        `GLOBAL' |
                                             `SESSION'
`Ndb_conflict_fn_epoch'       numeric        `GLOBAL'
`Ndb_conflict_fn_epoch_trans' numeric        `GLOBAL'
`Ndb_conflict_fn_max'         numeric        `GLOBAL'
`Ndb_conflict_fn_old'         numeric        `GLOBAL'
`Ndb_conflict_trans_conflict_commit_count'numeric        `GLOBAL'
`Ndb_conflict_trans_detect_iter_count'numeric        `GLOBAL'
`Ndb_conflict_trans_reject_count'numeric        `GLOBAL'
`Ndb_conflict_trans_row_conflict_count'numeric        `GLOBAL'
`Ndb_conflict_trans_row_reject_count'numeric        `GLOBAL'
`ndb_execute_count'           numeric        `GLOBAL'
`ndb-nodeid'                  numeric        `GLOBAL'
`Ndb_number_of_data_nodes'    numeric        `GLOBAL'
`ndb_pruned_scan_count'       numeric        `GLOBAL'
`Ndb_pushed_queries_defined'  numeric        `GLOBAL'
`Ndb_pushed_queries_dropped'  numeric        `GLOBAL'
`Ndb_pushed_queries_executed' numeric        `GLOBAL'
`ndb_pushed_reads'            numeric        `GLOBAL'
`ndb_scan_count'              numeric        `GLOBAL'
`Not_flushed_delayed_rows'    numeric        `GLOBAL'
`Open_files'                  numeric        `GLOBAL'
`Open_streams'                numeric        `GLOBAL'
`Open_table_definitions'      numeric        `GLOBAL'
`Open_tables'                 numeric        `GLOBAL' |
                                             `SESSION'
`Opened_files'                numeric        `GLOBAL'
`Opened_table_definitions'    numeric        `GLOBAL' |
                                             `SESSION'
`Opened_tables'               numeric        `GLOBAL' |
                                             `SESSION'
`Performance_schema_cond_classes_lost'numeric        `GLOBAL'
`Performance_schema_cond_instances_lost'numeric        `GLOBAL'
`Performance_schema_file_classes_lost'numeric        `GLOBAL'
`Performance_schema_file_handles_lost'numeric        `GLOBAL'
`Performance_schema_file_instances_lost'numeric        `GLOBAL'
`Performance_schema_locker_lost'numeric        `GLOBAL'
`Performance_schema_mutex_classes_lost'numeric        `GLOBAL'
`Performance_schema_mutex_instances_lost'numeric        `GLOBAL'
`Performance_schema_rwlock_classes_lost'numeric        `GLOBAL'
`Performance_schema_rwlock_instances_lost'numeric        `GLOBAL'
`Performance_schema_table_handles_lost'numeric        `GLOBAL'
`Performance_schema_table_instances_lost'numeric        `GLOBAL'
`Performance_schema_thread_classes_lost'numeric        `GLOBAL'
`Performance_schema_thread_instances_lost'numeric        `GLOBAL'
`Prepared_stmt_count'         numeric        `GLOBAL'
`Qcache_free_blocks'          numeric        `GLOBAL'
`Qcache_free_memory'          numeric        `GLOBAL'
`Qcache_hits'                 numeric        `GLOBAL'
`Qcache_inserts'              numeric        `GLOBAL'
`Qcache_lowmem_prunes'        numeric        `GLOBAL'
`Qcache_not_cached'           numeric        `GLOBAL'
`Qcache_queries_in_cache'     numeric        `GLOBAL'
`Qcache_total_blocks'         numeric        `GLOBAL'
`Queries'                     numeric        `GLOBAL' |
                                             `SESSION'
`Questions'                   numeric        `GLOBAL' |
                                             `SESSION'
`Rpl_semi_sync_master_clients'numeric        `GLOBAL'
`Rpl_semi_sync_master_net_avg_wait_time'numeric        `GLOBAL'
`Rpl_semi_sync_master_net_wait_time'numeric        `GLOBAL'
`Rpl_semi_sync_master_net_waits'numeric        `GLOBAL'
`Rpl_semi_sync_master_no_times'numeric        `GLOBAL'
`Rpl_semi_sync_master_no_tx'  numeric        `GLOBAL'
`Rpl_semi_sync_master_status' boolean        `GLOBAL'
`Rpl_semi_sync_master_timefunc_failures'numeric        `GLOBAL'
`Rpl_semi_sync_master_tx_avg_wait_time'numeric        `GLOBAL'
`Rpl_semi_sync_master_tx_wait_time'numeric        `GLOBAL'
`Rpl_semi_sync_master_tx_waits'numeric        `GLOBAL'
`Rpl_semi_sync_master_wait_pos_backtraverse'numeric        `GLOBAL'
`Rpl_semi_sync_master_wait_sessions'numeric        `GLOBAL'
`Rpl_semi_sync_master_yes_tx' numeric        `GLOBAL'
`Rpl_semi_sync_slave_status'  boolean        `GLOBAL'
`Rpl_status'                  string         `GLOBAL'
`Select_full_join'            numeric        `GLOBAL' |
                                             `SESSION'
`Select_full_range_join'      numeric        `GLOBAL' |
                                             `SESSION'
`Select_range'                numeric        `GLOBAL' |
                                             `SESSION'
`Select_range_check'          numeric        `GLOBAL' |
                                             `SESSION'
`Select_scan'                 numeric        `GLOBAL' |
                                             `SESSION'
`Slave_heartbeat_period'                     `GLOBAL'
`Slave_open_temp_tables'      numeric        `GLOBAL'
`Slave_received_heartbeats'                  `GLOBAL'
`Slave_retried_transactions'  numeric        `GLOBAL'
`Slave_running'               boolean        `GLOBAL'
`Slow_launch_threads'         numeric        `GLOBAL' |
                                             `SESSION'
`Slow_queries'                numeric        `GLOBAL' |
                                             `SESSION'
`Sort_merge_passes'           numeric        `GLOBAL' |
                                             `SESSION'
`Sort_range'                  numeric        `GLOBAL' |
                                             `SESSION'
`Sort_rows'                   numeric        `GLOBAL' |
                                             `SESSION'
`Sort_scan'                   numeric        `GLOBAL' |
                                             `SESSION'
`Ssl_accept_renegotiates'     numeric        `GLOBAL'
`Ssl_accepts'                 numeric        `GLOBAL'
`Ssl_callback_cache_hits'     numeric        `GLOBAL'
`Ssl_cipher'                  string         `GLOBAL' |
                                             `SESSION'
`Ssl_cipher_list'             string         `GLOBAL' |
                                             `SESSION'
`Ssl_client_connects'         numeric        `GLOBAL'
`Ssl_connect_renegotiates'    numeric        `GLOBAL'
`Ssl_ctx_verify_depth'        numeric        `GLOBAL'
`Ssl_ctx_verify_mode'         numeric        `GLOBAL'
`Ssl_default_timeout'         numeric        `GLOBAL' |
                                             `SESSION'
`Ssl_finished_accepts'        numeric        `GLOBAL'
`Ssl_finished_connects'       numeric        `GLOBAL'
`Ssl_session_cache_hits'      numeric        `GLOBAL'
`Ssl_session_cache_misses'    numeric        `GLOBAL'
`Ssl_session_cache_mode'      string         `GLOBAL'
`Ssl_session_cache_overflows' numeric        `GLOBAL'
`Ssl_session_cache_size'      numeric        `GLOBAL'
`Ssl_session_cache_timeouts'  numeric        `GLOBAL'
`Ssl_sessions_reused'         numeric        `GLOBAL' |
                                             `SESSION'
`Ssl_used_session_cache_entries'numeric        `GLOBAL'
`Ssl_verify_depth'            numeric        `GLOBAL' |
                                             `SESSION'
`Ssl_verify_mode'             numeric        `GLOBAL' |
                                             `SESSION'
`Ssl_version'                 string         `GLOBAL' |
                                             `SESSION'
`Table_locks_immediate'       numeric        `GLOBAL'
`Table_locks_waited'          numeric        `GLOBAL'
`Tc_log_max_pages_used'       numeric        `GLOBAL'
`Tc_log_page_size'            numeric        `GLOBAL'
`Tc_log_page_waits'           numeric        `GLOBAL'
`Threads_cached'              numeric        `GLOBAL'
`Threads_connected'           numeric        `GLOBAL'
`Threads_created'             numeric        `GLOBAL'
`Threads_running'             numeric        `GLOBAL'
`Uptime'                      numeric        `GLOBAL'
`Uptime_since_flush_status'   numeric        `GLOBAL'

The status variables have the following meanings. For meanings of
status variables specific to MySQL Cluster, see *Note
mysql-cluster-status-variables::.

   *  `Aborted_clients'

     The number of connections that were aborted because the client
     died without closing the connection properly. See *Note
     communication-errors::.

   *  `Aborted_connects'

     The number of failed attempts to connect to the MySQL server.  See
     *Note communication-errors::.

   *  `Binlog_cache_disk_use'

     The number of transactions that used the binary log cache but that
     exceeded the value of `binlog_cache_size' and used a temporary
     file to store changes from the transaction.

     In MySQL versions 5.5.3 through 5.5.8, this variable also included
     the number of nontransactional statements that caused the binary
     log transaction cache to be written to disk.  Beginning with MySQL
     5.5.9, the number of such nontransactional statements is tracked
     separately in the `Binlog_stmt_cache_disk_use' status variable.

   *  `Binlog_cache_use'

     The number of transactions that used the binary log cache.

   *  `Binlog_stmt_cache_disk_use'

     The number of nontransaction statements that used the binary log
     statement cache but that exceeded the value of
     `binlog_stmt_cache_size' and used a temporary file to store those
     statements.

   *  `Binlog_stmt_cache_use'

     The number of nontransactional statements that used the binary log
     statement cache.

   *  `Bytes_received'

     The number of bytes received from all clients.

   *  `Bytes_sent'

     The number of bytes sent to all clients.

   *  `Com_XXX'

     The `Com_XXX' statement counter variables indicate the number of
     times each XXX statement has been executed.  There is one status
     variable for each type of statement. For example, `Com_delete' and
     `Com_update' count *Note `DELETE': delete. and *Note `UPDATE':
     update. statements, respectively. `Com_delete_multi' and
     `Com_update_multi' are similar but apply to *Note `DELETE':
     delete. and *Note `UPDATE': update. statements that use
     multiple-table syntax.

     If a query result is returned from query cache, the server
     increments the `Qcache_hits' status variable, not `Com_select'. See
     *Note query-cache-status-and-maintenance::.

     All of the `Com_stmt_XXX' variables are increased even if a
     prepared statement argument is unknown or an error occurred during
     execution. In other words, their values correspond to the number
     of requests issued, not to the number of requests successfully
     completed.

     The `Com_stmt_XXX' status variables are as follows:

        * `Com_stmt_prepare'

        * `Com_stmt_execute'

        * `Com_stmt_fetch'

        * `Com_stmt_send_long_data'

        * `Com_stmt_reset'

        * `Com_stmt_close'

     Those variables stand for prepared statement commands. Their names
     refer to the `COM_XXX' command set used in the network layer. In
     other words, their values increase whenever prepared statement API
     calls such as `mysql_stmt_prepare()', `mysql_stmt_execute()', and
     so forth are executed. However, `Com_stmt_prepare',
     `Com_stmt_execute' and `Com_stmt_close' also increase for *Note
     `PREPARE': prepare, *Note `EXECUTE': execute, or *Note `DEALLOCATE
     PREPARE': deallocate-prepare, respectively. Additionally, the
     values of the older statement counter variables `Com_prepare_sql',
     `Com_execute_sql', and `Com_dealloc_sql' increase for the *Note
     `PREPARE': prepare, *Note `EXECUTE': execute, and *Note
     `DEALLOCATE PREPARE': deallocate-prepare. statements.
     `Com_stmt_fetch' stands for the total number of network
     round-trips issued when fetching from cursors.

     `Com_stmt_reprepare' indicates the number of times statements were
     automatically reprepared by the server after metadata changes to
     tables or views referred to by the statement. A reprepare
     operation increments `Com_stmt_reprepare', and also
     `Com_stmt_prepare'.

   *  `Compression'

     Whether the client connection uses compression in the
     client/server protocol.

   *  `Connections'

     The number of connection attempts (successful or not) to the MySQL
     server.

   *  `Created_tmp_disk_tables'

     The number of internal on-disk temporary tables created by the
     server while executing statements.

     If an internal temporary table is created initially as an
     in-memory table but becomes too large, MySQL automatically
     converts it to an on-disk table. The maximum size for in-memory
     temporary tables is the minimum of the `tmp_table_size' and
     `max_heap_table_size' values.  If `Created_tmp_disk_tables' is
     large, you may want to increase the `tmp_table_size' or
     `max_heap_table_size' value to lessen the likelihood that internal
     temporary tables in memory will be converted to on-disk tables.

     You can compare the number of internal on-disk temporary tables
     created to the total number of internal temporary tables created
     by comparing the values of the `Created_tmp_disk_tables' and
     `Created_tmp_tables' variables.

     See also *Note internal-temporary-tables::.

   *  `Created_tmp_files'

     How many temporary files *Note `mysqld': mysqld. has created.

   *  `Created_tmp_tables'

     The number of internal temporary tables created by the server
     while executing statements.

     You can compare the number of internal on-disk temporary tables
     created to the total number of internal temporary tables created
     by comparing the values of the `Created_tmp_disk_tables' and
     `Created_tmp_tables' variables.

     See also *Note internal-temporary-tables::.

     Each invocation of the *Note `SHOW STATUS': show-status. statement
     uses an internal temporary table and increments the global
     `Created_tmp_tables' value.

   *  `Delayed_errors'

     The number of rows written with *Note `INSERT DELAYED':
     insert-delayed. for which some error occurred (probably `duplicate
     key').

   *  `Delayed_insert_threads'

     The number of *Note `INSERT DELAYED': insert-delayed.  handler
     threads in use.

   *  `Delayed_writes'

     The number of *Note `INSERT DELAYED': insert-delayed.  rows
     written.

   *  `Flush_commands'

     The number of times the server flushes tables, whether because a
     user executed a *Note `FLUSH TABLES': flush. statement or due to
     internal server operation. It is also incremented by receipt of a
     `COM_REFRESH' packet. This is in contrast to `Com_flush', which
     indicates how many `FLUSH' statements have been executed, whether
     *Note `FLUSH TABLES': flush, *Note `FLUSH LOGS': flush, and so
     forth.

   *  `Handler_commit'

     The number of internal *Note `COMMIT': commit.  statements.

   *  `Handler_delete'

     The number of times that rows have been deleted from tables.

   *  `Handler_prepare'

     A counter for the prepare phase of two-phase commit operations.

   *  `Handler_read_first'

     The number of times the first entry in an index was read. If this
     value is high, it suggests that the server is doing a lot of full
     index scans; for example, `SELECT col1 FROM foo', assuming that
     `col1' is indexed.

   *  `Handler_read_key'

     The number of requests to read a row based on a key. If this value
     is high, it is a good indication that your tables are properly
     indexed for your queries.

   *  `Handler_read_last'

     The number of requests to read the last key in an index. With
     `ORDER BY', the server will issue a first-key request followed by
     several next-key requests, whereas with With `ORDER BY DESC', the
     server will issue a last-key request followed by several
     previous-key requests.  This variable was added in MySQL 5.5.7.

   *  `Handler_read_next'

     The number of requests to read the next row in key order. This
     value is incremented if you are querying an index column with a
     range constraint or if you are doing an index scan.

   *  `Handler_read_prev'

     The number of requests to read the previous row in key order.
     This read method is mainly used to optimize `ORDER BY ... DESC'.

   *  `Handler_read_rnd'

     The number of requests to read a row based on a fixed position.
     This value is high if you are doing a lot of queries that require
     sorting of the result. You probably have a lot of queries that
     require MySQL to scan entire tables or you have joins that do not
     use keys properly.

   *  `Handler_read_rnd_next'

     The number of requests to read the next row in the data file.
     This value is high if you are doing a lot of table scans.
     Generally this suggests that your tables are not properly indexed
     or that your queries are not written to take advantage of the
     indexes you have.

   *  `Handler_rollback'

     The number of requests for a storage engine to perform a rollback
     operation.

   *  `Handler_savepoint'

     The number of requests for a storage engine to place a savepoint.

   *  `Handler_savepoint_rollback'

     The number of requests for a storage engine to roll back to a
     savepoint.

   *  `Handler_update'

     The number of requests to update a row in a table.

   *  `Handler_write'

     The number of requests to insert a row in a table.

   *  `Innodb_buffer_pool_bytes_data'

     The total number of bytes in the `InnoDB' buffer pool containing
     data. The number includes both dirty and clean pages.  For more
     accurate memory usage calculations than with
     `Innodb_buffer_pool_pages_data', when compressed tables cause the
     buffer pool to hold pages of different sizes.

   *  `Innodb_buffer_pool_pages_data'

     The number of pages containing data (dirty or clean).

   *  `Innodb_buffer_pool_bytes_dirty'

     The total current number of bytes held in dirty pages in the
     `InnoDB' buffer pool. For more accurate memory usage calculations
     than with `Innodb_buffer_pool_pages_dirty', when compressed tables
     cause the buffer pool to hold pages of different sizes.

   *  `Innodb_buffer_pool_pages_dirty'

     The number of pages currently dirty.

   *  `Innodb_buffer_pool_pages_flushed'

     The number of buffer pool page-flush requests.

   *  `Innodb_buffer_pool_pages_free'

     The number of free pages.

   *  `Innodb_buffer_pool_pages_latched'

     The number of latched pages in `InnoDB' buffer pool. These are
     pages currently being read or written or that cannot be flushed or
     removed for some other reason.  Calculation of this variable is
     expensive, so it is available only when the `UNIV_DEBUG' system is
     defined at server build time.

   *  `Innodb_buffer_pool_pages_misc'

     The number of pages that are busy because they have been allocated
     for administrative overhead such as row locks or the adaptive hash
     index. This value can also be calculated as
     `Innodb_buffer_pool_pages_total' - `Innodb_buffer_pool_pages_free'
     - `Innodb_buffer_pool_pages_data'.

   *  `Innodb_buffer_pool_pages_total'

     The total size of the buffer pool, in pages.

   *  `Innodb_buffer_pool_read_ahead'

     The number of pages read into the `InnoDB' buffer pool by the
     read-ahead background thread.

   *  `Innodb_buffer_pool_read_ahead_evicted'

     The number of pages read into the `InnoDB' buffer pool by the
     read-ahead background thread that were subsequently evicted
     without having been accessed by queries.

   *  `Innodb_buffer_pool_read_requests'

     The number of logical read requests `InnoDB' has done.

   *  `Innodb_buffer_pool_reads'

     The number of logical reads that `InnoDB' could not satisfy from
     the buffer pool, and had to read directly from the disk.

   *  `Innodb_buffer_pool_wait_free'

     Normally, writes to the `InnoDB' buffer pool happen in the
     background. However, if it is necessary to read or create a page
     and no clean pages are available, it is also necessary to wait for
     pages to be flushed first. This counter counts instances of these
     waits. If the buffer pool size has been set properly, this value
     should be small.

   *  `Innodb_buffer_pool_write_requests'

     The number writes done to the `InnoDB' buffer pool.

   *  `Innodb_data_fsyncs'

     The number of `fsync()' operations so far.

   *  `Innodb_data_pending_fsyncs'

     The current number of pending `fsync()' operations.

   *  `Innodb_data_pending_reads'

     The current number of pending reads.

   *  `Innodb_data_pending_writes'

     The current number of pending writes.

   *  `Innodb_data_read'

     The amount of data read since the server was started.

   *  `Innodb_data_reads'

     The total number of data reads.

   *  `Innodb_data_writes'

     The total number of data writes.

   *  `Innodb_data_written'

     The amount of data written so far, in bytes.

   *  `Innodb_dblwr_pages_written'

     The number of pages that have been written for doublewrite
     operations. See *Note innodb-disk-io::.

   *  `Innodb_dblwr_writes'

     The number of doublewrite operations that have been performed.
     See *Note innodb-disk-io::.

   *  `Innodb_have_atomic_builtins'

     Indicates whether the server was built with atomic instructions.

   *  `Innodb_log_waits'

     The number of times that the log buffer was too small and a wait
     was required for it to be flushed before continuing.

   *  `Innodb_log_write_requests'

     The number of log write requests.

   *  `Innodb_log_writes'

     The number of physical writes to the log file.

   *  `Innodb_os_log_fsyncs'

     The number of `fsync()' writes done to the log file.

   *  `Innodb_os_log_pending_fsyncs'

     The number of pending log file `fsync()' operations.

   *  `Innodb_os_log_pending_writes'

     The number of pending log file writes.

   *  `Innodb_os_log_written'

     The number of bytes written to the log file.

   *  `Innodb_page_size'

     The compiled-in `InnoDB' page size (default 16KB). Many values are
     counted in pages; the page size enables them to be easily
     converted to bytes.

   *  `Innodb_pages_created'

     The number of pages created.

   *  `Innodb_pages_read'

     The number of pages read.

   *  `Innodb_pages_written'

     The number of pages written.

   *  `Innodb_row_lock_current_waits'

     The number of row locks currently being waited for.

   *  `Innodb_row_lock_time'

     The total time spent in acquiring row locks, in milliseconds.

   *  `Innodb_row_lock_time_avg'

     The average time to acquire a row lock, in milliseconds.

   *  `Innodb_row_lock_time_max'

     The maximum time to acquire a row lock, in milliseconds.

   *  `Innodb_row_lock_waits'

     The number of times a row lock had to be waited for.

   *  `Innodb_rows_deleted'

     The number of rows deleted from `InnoDB' tables.

   *  `Innodb_rows_inserted'

     The number of rows inserted into `InnoDB' tables.

   *  `Innodb_rows_read'

     The number of rows read from `InnoDB' tables.

   *  `Innodb_rows_updated'

     The number of rows updated in `InnoDB' tables.

   *  `Innodb_truncated_status_writes'

     The number of times output from the `SHOW ENGINE INNODB STATUS' is
     truncated. Monitoring applications that parse the output from this
     command can test this value before and after issuing the `SHOW
     ENGINE' command, to confirm if the output is complete or not.

   *  `Key_blocks_not_flushed'

     The number of key blocks in the key cache that have changed but
     have not yet been flushed to disk.

   *  `Key_blocks_unused'

     The number of unused blocks in the key cache. You can use this
     value to determine how much of the key cache is in use; see the
     discussion of `key_buffer_size' in *Note server-system-variables::.

   *  `Key_blocks_used'

     The number of used blocks in the key cache. This value is a
     high-water mark that indicates the maximum number of blocks that
     have ever been in use at one time.

   *  `Key_read_requests'

     The number of requests to read a key block from the cache.

   *  `Key_reads'

     The number of physical reads of a key block from disk. If
     `Key_reads' is large, then your `key_buffer_size' value is
     probably too small. The cache miss rate can be calculated as
     `Key_reads'/`Key_read_requests'.

   *  `Key_write_requests'

     The number of requests to write a key block to the cache.

   *  `Key_writes'

     The number of physical writes of a key block to disk.

   *  `Last_query_cost'

     The total cost of the last compiled query as computed by the query
     optimizer. This is useful for comparing the cost of different
     query plans for the same query. The default value of 0 means that
     no query has been compiled yet. The default value is 0.
     `Last_query_cost' has session scope.

     The `Last_query_cost' value can be computed accurately only for
     simple `flat' queries, not complex queries such as those with
     subqueries or *Note `UNION': union. For the latter, the value is
     set to 0.

   *  `Max_used_connections'

     The maximum number of connections that have been in use
     simultaneously since the server started.

   *  `Not_flushed_delayed_rows'

     The number of rows waiting to be written in *Note `INSERT
     DELAYED': insert-delayed. queues.

   *  `Open_files'

     The number of files that are open. This count includes regular
     files opened by the server. It does not include other types of
     files such as sockets or pipes. Also, the count does not include
     files that storage engines open using their own internal functions
     rather than asking the server level to do so.

   *  `Open_streams'

     The number of streams that are open (used mainly for logging).

   *  `Open_table_definitions'

     The number of cached `.frm' files.

   *  `Open_tables'

     The number of tables that are open.

   *  `Opened_files'

     The number of files that have been opened with `my_open()' (a
     `mysys' library function). Parts of the server that open files
     without using this function do not increment the count.

   *  `Opened_table_definitions'

     The number of `.frm' files that have been cached.

   *  `Opened_tables'

     The number of tables that have been opened. If `Opened_tables' is
     big, your `table_open_cache' value is probably too small.

   * `Performance_schema_XXX'

     Performance Schema status variables are listed in *Note
     performance-schema-status-variables::. These variables provide
     information about instrumentation that could not be loaded or
     created due to memory constraints.

   *  `Prepared_stmt_count'

     The current number of prepared statements. (The maximum number of
     statements is given by the `max_prepared_stmt_count' system
     variable.)

   *  `Qcache_free_blocks'

     The number of free memory blocks in the query cache.

   *  `Qcache_free_memory'

     The amount of free memory for the query cache.

   *  `Qcache_hits'

     The number of query cache hits.

   *  `Qcache_inserts'

     The number of queries added to the query cache.

   *  `Qcache_lowmem_prunes'

     The number of queries that were deleted from the query cache
     because of low memory.

   *  `Qcache_not_cached'

     The number of noncached queries (not cacheable, or not cached due
     to the `query_cache_type' setting).

   *  `Qcache_queries_in_cache'

     The number of queries registered in the query cache.

   *  `Qcache_total_blocks'

     The total number of blocks in the query cache.

   *  `Queries'

     The number of statements executed by the server. This variable
     includes statements executed within stored programs, unlike the
     `Questions' variable. It does not count `COM_PING' or
     `COM_STATISTICS' commands.

   *  `Questions'

     The number of statements executed by the server. This includes
     only statements sent to the server by clients and not statements
     executed within stored programs, unlike the `Queries' variable.
     This variable does not count `COM_PING', `COM_STATISTICS',
     `COM_STMT_PREPARE', `COM_STMT_CLOSE', or `COM_STMT_RESET' commands.

   *  `Rpl_semi_sync_master_clients'

     The number of semisynchronous slaves.

     This variable is available only if the master-side semisynchronous
     replication plugin is installed.

   *  `Rpl_semi_sync_master_net_avg_wait_time'

     The average time in microseconds the master waited for a slave
     reply.

     This variable is available only if the master-side semisynchronous
     replication plugin is installed.

   *  `Rpl_semi_sync_master_net_wait_time'

     The total time in microseconds the master waited for slave replies.

     This variable is available only if the master-side semisynchronous
     replication plugin is installed.

   *  `Rpl_semi_sync_master_net_waits'

     The total number of times the master waited for slave replies.

     This variable is available only if the master-side semisynchronous
     replication plugin is installed.

   *  `Rpl_semi_sync_master_no_times'

     The number of times the master turned off semisynchronous
     replication.

     This variable is available only if the master-side semisynchronous
     replication plugin is installed.

   *  `Rpl_semi_sync_master_no_tx'

     The number of commits that were not acknowledged successfully by a
     slave.

     This variable is available only if the master-side semisynchronous
     replication plugin is installed.

   *  `Rpl_semi_sync_master_status'

     Whether semisynchronous replication currently is operational on
     the master. The value is `ON' if the plugin has been enabled and a
     commit acknowledgment has occurred. It is `OFF' if the plugin is
     not enabled or the master has fallen back to asynchronous
     replication due to commit acknowledgment timeout.

     This variable is available only if the master-side semisynchronous
     replication plugin is installed.

   *  `Rpl_semi_sync_master_timefunc_failures'

     The number of times the master failed when calling time functions
     such as `gettimeofday()'.

     This variable is available only if the master-side semisynchronous
     replication plugin is installed.

   *  `Rpl_semi_sync_master_tx_avg_wait_time'

     The average time in microseconds the master waited for each
     transaction.

     This variable is available only if the master-side semisynchronous
     replication plugin is installed.

   *  `Rpl_semi_sync_master_tx_wait_time'

     The total time in microseconds the master waited for transactions.

     This variable is available only if the master-side semisynchronous
     replication plugin is installed.

   *  `Rpl_semi_sync_master_tx_waits'

     The total number of times the master waited for transactions.

     This variable is available only if the master-side semisynchronous
     replication plugin is installed.

   *  `Rpl_semi_sync_master_wait_pos_backtraverse'

     The total number of times the master waited for an event with
     binary coordinates lower than events waited for previously.  This
     can occur when the order in which transactions start waiting for a
     reply is different from the order in which their binary log events
     are written.

     This variable is available only if the master-side semisynchronous
     replication plugin is installed.

   *  `Rpl_semi_sync_master_wait_sessions'

     The number of sessions currently waiting for slave replies.

     This variable is available only if the master-side semisynchronous
     replication plugin is installed.

   *  `Rpl_semi_sync_master_yes_tx'

     The number of commits that were acknowledged successfully by a
     slave.

     This variable is available only if the master-side semisynchronous
     replication plugin is installed.

   *  `Rpl_semi_sync_slave_status'

     Whether semisynchronous replication currently is operational on
     the slave. This is `ON' if the plugin has been enabled and the
     slave I/O thread is running, `OFF' otherwise.

     This variable is available only if the slave-side semisynchronous
     replication plugin is installed.

   *  `Rpl_status'

     The status of fail-safe replication (not implemented). This
     variable is unused and is removed in MySQL 5.6.

   *  `Select_full_join'

     The number of joins that perform table scans because they do not
     use indexes. If this value is not 0, you should carefully check
     the indexes of your tables.

   *  `Select_full_range_join'

     The number of joins that used a range search on a reference table.

   *  `Select_range'

     The number of joins that used ranges on the first table. This is
     normally not a critical issue even if the value is quite large.

   *  `Select_range_check'

     The number of joins without keys that check for key usage after
     each row. If this is not 0, you should carefully check the indexes
     of your tables.

   *  `Select_scan'

     The number of joins that did a full scan of the first table.

   *  `Slave_heartbeat_period'

     Shows the replication heartbeat interval (in seconds) on a
     replication slave.

   *  `Slave_open_temp_tables'

     The number of temporary tables that the slave SQL thread currently
     has open. If the value is greater than zero, it is not safe to
     shut down the slave; see *Note replication-features-temptables::.

   *  `Slave_received_heartbeats'

     This counter increments with each replication heartbeat received
     by a replication slave since the last time that the slave was
     restarted or reset, or a *Note `CHANGE MASTER TO':
     change-master-to. statement was issued.

   *  `Slave_retried_transactions'

     The total number of times since startup that the replication slave
     SQL thread has retried transactions.

   *  `Slave_running'

     This is `ON' if this server is a replication slave that is
     connected to a replication master, and both the I/O and SQL
     threads are running; otherwise, it is `OFF'.

   *  `Slow_launch_threads'

     The number of threads that have taken more than `slow_launch_time'
     seconds to create.

   *  `Slow_queries'

     The number of queries that have taken more than `long_query_time'
     seconds. This counter increments regardless of whether the slow
     query log is enabled. For information about that log, see *Note
     slow-query-log::.

   *  `Sort_merge_passes'

     The number of merge passes that the sort algorithm has had to do.
     If this value is large, you should consider increasing the value
     of the `sort_buffer_size' system variable.

   *  `Sort_range'

     The number of sorts that were done using ranges.

   *  `Sort_rows'

     The number of sorted rows.

   *  `Sort_scan'

     The number of sorts that were done by scanning the table.

   *  `Ssl_accept_renegotiates'

     The number of negotiates needed to establish the connection.

   *  `Ssl_accepts'

     The number of accepted SSL connections.

   *  `Ssl_callback_cache_hits'

     The number of callback cache hits.

   *  `Ssl_cipher'

     The current SSL cipher (empty for non-SSL connections).

   *  `Ssl_cipher_list'

     The list of possible SSL ciphers.

   *  `Ssl_client_connects'

     The number of SSL connection attempts to an SSL-enabled master.

   *  `Ssl_connect_renegotiates'

     The number of negotiates needed to establish the connection to an
     SSL-enabled master.

   *  `Ssl_ctx_verify_depth'

     The SSL context verification depth (how many certificates in the
     chain are tested).

   *  `Ssl_ctx_verify_mode'

     The SSL context verification mode.

   *  `Ssl_default_timeout'

     The default SSL timeout.

   *  `Ssl_finished_accepts'

     The number of successful SSL connections to the server.

   *  `Ssl_finished_connects'

     The number of successful slave connections to an SSL-enabled
     master.

   *  `Ssl_session_cache_hits'

     The number of SSL session cache hits.

   *  `Ssl_session_cache_misses'

     The number of SSL session cache misses.

   *  `Ssl_session_cache_mode'

     The SSL session cache mode.

   *  `Ssl_session_cache_overflows'

     The number of SSL session cache overflows.

   *  `Ssl_session_cache_size'

     The SSL session cache size.

   *  `Ssl_session_cache_timeouts'

     The number of SSL session cache timeouts.

   *  `Ssl_sessions_reused'

     How many SSL connections were reused from the cache.

   *  `Ssl_used_session_cache_entries'

     How many SSL session cache entries were used.

   *  `Ssl_verify_depth'

     The verification depth for replication SSL connections.

   *  `Ssl_verify_mode'

     The verification mode for replication SSL connections.

   *  `Ssl_version'

     The SSL version number.

   *  `Table_locks_immediate'

     The number of times that a request for a table lock could be
     granted immediately.

   *  `Table_locks_waited'

     The number of times that a request for a table lock could not be
     granted immediately and a wait was needed. If this is high and you
     have performance problems, you should first optimize your queries,
     and then either split your table or tables or use replication.

   *  `Tc_log_max_pages_used'

     For the memory-mapped implementation of the log that is used by
     *Note `mysqld': mysqld. when it acts as the transaction
     coordinator for recovery of internal XA transactions, this
     variable indicates the largest number of pages used for the log
     since the server started. If the product of
     `Tc_log_max_pages_used' and `Tc_log_page_size' is always
     significantly less than the log size, the size is larger than
     necessary and can be reduced. (The size is set by the
     `--log-tc-size' option.  Currently, this variable is unused: It is
     unneeded for binary log-based recovery, and the memory-mapped
     recovery log method is not used unless the number of storage
     engines capable of two-phase commit is greater than one.
     (`InnoDB' is the only applicable engine.)

   *  `Tc_log_page_size'

     The page size used for the memory-mapped implementation of the XA
     recovery log. The default value is determined using
     `getpagesize()'. Currently, this variable is unused for the same
     reasons as described for `Tc_log_max_pages_used'.

   *  `Tc_log_page_waits'

     For the memory-mapped implementation of the recovery log, this
     variable increments each time the server was not able to commit a
     transaction and had to wait for a free page in the log. If this
     value is large, you might want to increase the log size (with the
     `--log-tc-size' option). For binary log-based recovery, this
     variable increments each time the binary log cannot be closed
     because there are two-phase commits in progress. (The close
     operation waits until all such transactions are finished.)

   *  `Threads_cached'

     The number of threads in the thread cache.

   *  `Threads_connected'

     The number of currently open connections.

   *  `Threads_created'

     The number of threads created to handle connections. If
     `Threads_created' is big, you may want to increase the
     `thread_cache_size' value. The cache miss rate can be calculated as
     `Threads_created'/`Connections'.

   *  `Threads_running'

     The number of threads that are not sleeping.

   *  `Uptime'

     The number of seconds that the server has been up.

   *  `Uptime_since_flush_status'

     The number of seconds since the most recent `FLUSH STATUS'
     statement.


File: manual.info,  Node: server-sql-mode,  Next: server-plugins,  Prev: server-status-variables,  Up: mysqld-server

5.1.7 Server SQL Modes
----------------------

The MySQL server can operate in different SQL modes, and can apply
these modes differently for different clients, depending on the value
of the `sql_mode' system variable. This capability enables each
application to tailor the server's operating mode to its own
requirements.

For answers to some questions that are often asked about server SQL
modes in MySQL, see *Note faqs-sql-modes::.

Modes define what SQL syntax MySQL should support and what kind of data
validation checks it should perform. This makes it easier to use MySQL
in different environments and to use MySQL together with other database
servers.

When working with `InnoDB' tables, consider also the
`innodb_strict_mode' configuration option. It enables additional error
checks for `InnoDB' tables, as listed in *Note
innodb-other-changes-strict-mode::.

* Setting the SQL Mode *

The default SQL mode is empty (no modes set).

To set the SQL mode at server startup, use the `--sql-mode="MODES"'
option on the command line, or `sql-mode="MODES"' in an option file
such as `my.cnf' (Unix operating systems) or `my.ini' (Windows).  MODES
is a list of different modes separated by commas. To clear the SQL mode
explicitly, set it to an empty string using `--sql-mode=""' on the
command line, or `sql-mode=""' in an option file.

*Note*:

MySQL installation programs may configure the SQL mode during the
installation process. If the SQL mode differs from the default or from
what you expect, check for a setting in an option file that the server
reads at startup.

To change the SQL mode at runtime, use a `SET [GLOBAL|SESSION]
sql_mode='MODES'' statement to set the `sql_mode' system variable.
Setting the `GLOBAL' variable requires the `SUPER' privilege and
affects the operation of all clients that connect from that time on.
Setting the `SESSION' variable affects only the current client. Any
client can change its own session `sql_mode' value at any time.

To determine the current global or session `sql_mode' value, use the
following statements:

     SELECT @@GLOBAL.sql_mode;
     SELECT @@SESSION.sql_mode;

*Important*:

SQL mode and user-defined partitioning

Changing the server SQL mode after creating and inserting data into
partitioned tables can cause major changes in the behavior of such
tables, and could lead to loss or corruption of data. It is strongly
recommended that you never change the SQL mode once you have created
tables employing user-defined partitioning.

When replicating partitioned tables, differing SQL modes on master and
slave can also lead to problems. For best results, you should always
use the same server SQL mode on the master and on the slave.

See *Note partitioning-limitations::, for more information.

* Most Important SQL Modes *

The most important `sql_mode' values are probably these:

   * `ANSI'

     This mode changes syntax and behavior to conform more closely to
     standard SQL. It is one of the special combination modes listed at
     the end of this section.

   * `STRICT_TRANS_TABLES'

     If a value could not be inserted as given into a transactional
     table, abort the statement. For a nontransactional table, abort
     the statement if the value occurs in a single-row statement or the
     first row of a multiple-row statement. More detail is given later
     in this section.

   * `TRADITIONAL'

     Make MySQL behave like a `traditional' SQL database system. A
     simple description of this mode is `give an error instead of a
     warning' when inserting an incorrect value into a column. It is
     one of the special combination modes listed at the end of this
     section.

     *Note*:

     The *Note `INSERT': insert. or *Note `UPDATE': update. aborts as
     soon as the error is noticed. This may not be what you want if you
     are using a nontransactional storage engine, because data changes
     made prior to the error may not be rolled back, resulting in a
     `partially done' update.

When this manual refers to `strict mode,' it means a mode where at
least one of `STRICT_TRANS_TABLES' or `STRICT_ALL_TABLES' is enabled.

* Full List of SQL Modes *

The following list describes all supported modes:

   *  `ALLOW_INVALID_DATES'

     Do not perform full checking of dates. Check only that the month
     is in the range from 1 to 12 and the day is in the range from 1 to
     31. This is very convenient for Web applications where you obtain
     year, month, and day in three different fields and you want to
     store exactly what the user inserted (without date validation).
     This mode applies to *Note `DATE': datetime. and *Note `DATETIME':
     datetime. columns. It does not apply *Note `TIMESTAMP': datetime.
     columns, which always require a valid date.

     The server requires that month and day values be legal, and not
     merely in the range 1 to 12 and 1 to 31, respectively.  With
     strict mode disabled, invalid dates such as `'2004-04-31'' are
     converted to `'0000-00-00'' and a warning is generated.  With
     strict mode enabled, invalid dates generate an error. To permit
     such dates, enable `ALLOW_INVALID_DATES'.

   *  `ANSI_QUOTES'

     Treat ``"'' as an identifier quote character (like the ```'' quote
     character) and not as a string quote character. You can still use
     ```'' to quote identifiers with this mode enabled. With
     `ANSI_QUOTES' enabled, you cannot use double quotation marks to
     quote literal strings, because it is interpreted as an identifier.

   *  `ERROR_FOR_DIVISION_BY_ZERO'

     Produce an error in strict mode (otherwise a warning) when a
     division by zero (or `MOD(X,0)') occurs during an *Note `INSERT':
     insert. or *Note `UPDATE': update. If this mode is not enabled,
     MySQL instead returns `NULL' for divisions by zero. For *Note
     `INSERT IGNORE': insert. or *Note `UPDATE IGNORE': update, MySQL
     generates a warning for divisions by zero, but the result of the
     operation is `NULL'.

     For *Note `SELECT': select, division by zero returns `NULL'.
     Enabling this mode causes a warning to be generated as well.

   *  `HIGH_NOT_PRECEDENCE'

     The precedence of the `NOT' operator is such that expressions such
     as `NOT a BETWEEN b AND c' are parsed as `NOT (a BETWEEN b AND
     c)'. In some older versions of MySQL, the expression was parsed as
     `(NOT a) BETWEEN b AND c'. The old higher-precedence behavior can
     be obtained by enabling the `HIGH_NOT_PRECEDENCE' SQL mode.

          mysql> SET sql_mode = '';
          mysql> SELECT NOT 1 BETWEEN -5 AND 5;
                  -> 0
          mysql> SET sql_mode = 'HIGH_NOT_PRECEDENCE';
          mysql> SELECT NOT 1 BETWEEN -5 AND 5;
                  -> 1

   *  `IGNORE_SPACE'

     Permit spaces between a function name and the ``('' character.
     This causes built-in function names to be treated as reserved
     words. As a result, identifiers that are the same as function
     names must be quoted as described in *Note identifiers::. For
     example, because there is a `COUNT()' function, the use of `count'
     as a table name in the following statement causes an error:

          mysql> CREATE TABLE count (i INT);
          ERROR 1064 (42000): You have an error in your SQL syntax

     The table name should be quoted:

          mysql> CREATE TABLE `count` (i INT);
          Query OK, 0 rows affected (0.00 sec)

     The `IGNORE_SPACE' SQL mode applies to built-in functions, not to
     user-defined functions or stored functions. It is always
     permissible to have spaces after a UDF or stored function name,
     regardless of whether `IGNORE_SPACE' is enabled.

     For further discussion of `IGNORE_SPACE', see *Note
     function-resolution::.

   *  `NO_AUTO_CREATE_USER'

     Prevent the *Note `GRANT': grant. statement from automatically
     creating new users if it would otherwise do so, unless
     authentication information is specified. The statement must
     specify a nonempty password using `IDENTIFIED BY' or an
     authentication plugin using `IDENTIFIED WITH'.

   *  `NO_AUTO_VALUE_ON_ZERO'

     `NO_AUTO_VALUE_ON_ZERO' affects handling of `AUTO_INCREMENT'
     columns.  Normally, you generate the next sequence number for the
     column by inserting either `NULL' or `0' into it.
     `NO_AUTO_VALUE_ON_ZERO' suppresses this behavior for `0' so that
     only `NULL' generates the next sequence number.

     This mode can be useful if `0' has been stored in a table's
     `AUTO_INCREMENT' column.  (Storing `0' is not a recommended
     practice, by the way.) For example, if you dump the table with
     *Note `mysqldump': mysqldump. and then reload it, MySQL normally
     generates new sequence numbers when it encounters the `0' values,
     resulting in a table with contents different from the one that was
     dumped. Enabling `NO_AUTO_VALUE_ON_ZERO' before reloading the dump
     file solves this problem.  *Note `mysqldump': mysqldump. now
     automatically includes in its output a statement that enables
     `NO_AUTO_VALUE_ON_ZERO', to avoid this problem.

   *  `NO_BACKSLASH_ESCAPES'

     Disable the use of the backslash character (``\'') as an escape
     character within strings. With this mode enabled, backslash
     becomes an ordinary character like any other.

   *  `NO_DIR_IN_CREATE'

     When creating a table, ignore all `INDEX DIRECTORY' and `DATA
     DIRECTORY' directives. This option is useful on slave replication
     servers.

   *  `NO_ENGINE_SUBSTITUTION'

     Control automatic substitution of the default storage engine when
     a statement such as *Note `CREATE TABLE': create-table. or *Note
     `ALTER TABLE': alter-table.  specifies a storage engine that is
     disabled or not compiled in.

     Because storage engines can be pluggable at runtime, unavailable
     engines are treated the same way:

     With `NO_ENGINE_SUBSTITUTION' disabled, for *Note `CREATE TABLE':
     create-table. the default engine is used and a warning occurs if
     the desired engine is unavailable. For *Note `ALTER TABLE':
     alter-table, a warning occurs and the table is not altered.

     With `NO_ENGINE_SUBSTITUTION' enabled, an error occurs and the
     table is not created or altered if the desired engine is
     unavailable.

   *  `NO_FIELD_OPTIONS'

     Do not print MySQL-specific column options in the output of *Note
     `SHOW CREATE TABLE': show-create-table. This mode is used by *Note
     `mysqldump': mysqldump. in portability mode.

   *  `NO_KEY_OPTIONS'

     Do not print MySQL-specific index options in the output of *Note
     `SHOW CREATE TABLE': show-create-table. This mode is used by *Note
     `mysqldump': mysqldump. in portability mode.

   *  `NO_TABLE_OPTIONS'

     Do not print MySQL-specific table options (such as `ENGINE') in
     the output of *Note `SHOW CREATE TABLE': show-create-table. This
     mode is used by *Note `mysqldump': mysqldump. in portability mode.

   *  `NO_UNSIGNED_SUBTRACTION'

     By default, subtraction between integer operands produces an
     `UNSIGNED' result if any operand is`UNSIGNED'. When
     `NO_UNSIGNED_SUBTRACTION' is enabled, the subtraction result is
     signed, _even if any operand is unsigned_. For example, compare the
     type of column `c2' in table `t1' with that of column `c2' in
     table `t2':

          mysql> SET sql_mode='';
          mysql> CREATE TABLE test (c1 BIGINT UNSIGNED NOT NULL);
          mysql> CREATE TABLE t1 SELECT c1 - 1 AS c2 FROM test;
          mysql> DESCRIBE t1;
          +-------+---------------------+------+-----+---------+-------+
          | Field | Type                | Null | Key | Default | Extra |
          +-------+---------------------+------+-----+---------+-------+
          | c2    | bigint(21) unsigned |      |     | 0       |       |
          +-------+---------------------+------+-----+---------+-------+

          mysql> SET sql_mode='NO_UNSIGNED_SUBTRACTION';
          mysql> CREATE TABLE t2 SELECT c1 - 1 AS c2 FROM test;
          mysql> DESCRIBE t2;
          +-------+------------+------+-----+---------+-------+
          | Field | Type       | Null | Key | Default | Extra |
          +-------+------------+------+-----+---------+-------+
          | c2    | bigint(21) |      |     | 0       |       |
          +-------+------------+------+-----+---------+-------+

     Note that this means that `BIGINT UNSIGNED' is not 100% usable in
     all contexts. See *Note cast-functions::.

          mysql> SET sql_mode = '';
          mysql> SELECT CAST(0 AS UNSIGNED) - 1;
          +-------------------------+
          | CAST(0 AS UNSIGNED) - 1 |
          +-------------------------+
          |    18446744073709551615 |
          +-------------------------+

          mysql> SET sql_mode = 'NO_UNSIGNED_SUBTRACTION';
          mysql> SELECT CAST(0 AS UNSIGNED) - 1;
          +-------------------------+
          | CAST(0 AS UNSIGNED) - 1 |
          +-------------------------+
          |                      -1 |
          +-------------------------+

   *  `NO_ZERO_DATE'

     In strict mode, do not permit `'0000-00-00'' as a valid date. You
     can still insert zero dates with the `IGNORE' option. When not in
     strict mode, the date is accepted but a warning is generated.

   *  `NO_ZERO_IN_DATE'

     In strict mode, do not accept dates where the year part is nonzero
     but the month or day part is 0 (for example, `'0000-00-00'' is
     legal but `'2010-00-01'' and `'2010-01-00'' are not). If used with
     the `IGNORE' option, MySQL inserts a `'0000-00-00'' date for any
     such date. When not in strict mode, the date is accepted but a
     warning is generated.

   *  `ONLY_FULL_GROUP_BY'

     Do not permit queries for which the select list or or `HAVING'
     list refers to nonaggregated columns that are not named in the
     `GROUP BY' clause.

     The following queries are invalid with `ONLY_FULL_GROUP_BY'
     enabled.  The first is invalid because `address' in the select
     list is not named in the `GROUP BY' clause, and the second because
     `max_age' in the `HAVING' clause is not named in the `GROUP BY'
     clause:


          mysql> SELECT name, address, MAX(age) FROM t GROUP BY name;
          ERROR 1055 (42000): 't.address' isn't in GROUP BY


          mysql> SELECT name, MAX(age) AS max_age FROM t GROUP BY name
              -> HAVING max_age < 30;
          Empty set (0.00 sec)
          ERROR 1463 (42000): Non-grouping field 'max_age' is used in HAVING clause

     In the second example, the query could be rewritten to use `HAVING
     MAX(age)' instead, so that the reference is to a column named in
     an aggregate function.  (`max_age' fails because it _is_ an
     aggregate function.)

     In addition, if a query has aggregate functions and no `GROUP BY'
     clause, it cannot have nonaggregated columns in the select list or
     `ORDER BY' list:


          mysql> SELECT name, MAX(age) FROM t;
          ERROR 1140 (42000): Mixing of GROUP columns (MIN(),MAX(),COUNT(),...)
          with no GROUP columns is illegal if there is no GROUP BY clause

     For more information, see *Note group-by-extensions::.

   *  `PAD_CHAR_TO_FULL_LENGTH'

     By default, trailing spaces are trimmed from *Note `CHAR': char.
     column values on retrieval. If `PAD_CHAR_TO_FULL_LENGTH' is
     enabled, trimming does not occur and retrieved *Note `CHAR': char.
     values are padded to their full length. This mode does not apply to
     *Note `VARCHAR': char. columns, for which trailing spaces are
     retained on retrieval.


          mysql> CREATE TABLE t1 (c1 CHAR(10));
          Query OK, 0 rows affected (0.37 sec)

          mysql> INSERT INTO t1 (c1) VALUES('xy');
          Query OK, 1 row affected (0.01 sec)

          mysql> SET sql_mode = '';
          Query OK, 0 rows affected (0.00 sec)

          mysql> SELECT c1, CHAR_LENGTH(c1) FROM t1;
          +------+-----------------+
          | c1   | CHAR_LENGTH(c1) |
          +------+-----------------+
          | xy   |               2 |
          +------+-----------------+
          1 row in set (0.00 sec)

          mysql> SET sql_mode = 'PAD_CHAR_TO_FULL_LENGTH';
          Query OK, 0 rows affected (0.00 sec)

          mysql> SELECT c1, CHAR_LENGTH(c1) FROM t1;
          +------------+-----------------+
          | c1         | CHAR_LENGTH(c1) |
          +------------+-----------------+
          | xy         |              10 |
          +------------+-----------------+
          1 row in set (0.00 sec)

   *  `PIPES_AS_CONCAT'

     Treat `||' as a string concatenation operator (same as `CONCAT()')
     rather than as a synonym for `OR'.

   *  `REAL_AS_FLOAT'

     Treat *Note `REAL': floating-point-types. as a synonym for *Note
     `FLOAT': floating-point-types. By default, MySQL treats *Note
     `REAL': floating-point-types. as a synonym for *Note `DOUBLE':
     floating-point-types.

   *  `STRICT_ALL_TABLES'

     Enable strict mode for all storage engines. Invalid data values
     are rejected. Additional detail follows.

   *  `STRICT_TRANS_TABLES'

     Enable strict mode for transactional storage engines, and when
     possible for nontransactional storage engines. Additional details
     follow.

Strict mode controls how MySQL handles invalid or missing values in
data-change statements such as *Note `INSERT': insert. or *Note
`UPDATE': update. A value can be invalid for several reasons. For
example, it might have the wrong data type for the column, or it might
be out of range. A value is missing when a new row to be inserted does
not contain a value for a non-`NULL' column that has no explicit
`DEFAULT' clause in its definition. (For a `NULL' column, `NULL' is
inserted if the value is missing.)

For statements that do not change data, such as *Note `SELECT': select,
invalid values generate a warning in strict mode, not an error.

For transactional tables, an error occurs for invalid or missing values
in a data-change statement when either of the `STRICT_ALL_TABLES' or
`STRICT_TRANS_TABLES' modes are enabled. The statement is aborted and
rolled back.

For nontransactional tables, the behavior is the same for either mode,
if the bad value occurs in the first row to be inserted or updated. The
statement is aborted and the table remains unchanged.  If the statement
inserts or modifies multiple rows and the bad value occurs in the
second or later row, the result depends on which strict option is
enabled:

   * For `STRICT_ALL_TABLES', MySQL returns an error and ignores the
     rest of the rows. However, in this case, the earlier rows still
     have been inserted or updated. This means that you might get a
     partial update, which might not be what you want. To avoid this,
     it is best to use single-row statements because these can be
     aborted without changing the table.

   * For `STRICT_TRANS_TABLES', MySQL converts an invalid value to the
     closest valid value for the column and insert the adjusted value.
     If a value is missing, MySQL inserts the implicit default value
     for the column data type. In either case, MySQL generates a warning
     rather than an error and continues processing the statement.
     Implicit defaults are described in *Note data-type-defaults::.

Strict mode disallows invalid date values such as `'2004-04-31''. It
does not disallow dates with zero month or day parts such as
`'2004-04-00'' or `zero' dates. To disallow these as well, enable the
`NO_ZERO_IN_DATE' and `NO_ZERO_DATE' SQL modes in addition to strict
mode.

If you are not using strict mode (that is, neither
`STRICT_TRANS_TABLES' nor `STRICT_ALL_TABLES' is enabled), MySQL
inserts adjusted values for invalid or missing values and produces
warnings. In strict mode, you can produce this behavior by using *Note
`INSERT IGNORE': insert. or *Note `UPDATE IGNORE': update. See *Note
show-warnings::.

Strict mode does not affect whether foreign key constraints are
checked. `foreign_key_checks' can be used for that. (See *Note
server-system-variables::.)

* Combination Modes *

The following special modes are provided as shorthand for combinations
of mode values from the preceding list.

The descriptions include all mode values that are available in the most
recent version of MySQL. For older versions, a combination mode does
not include individual mode values that are not available except in
newer versions.

   *  `ANSI'

     Equivalent to `REAL_AS_FLOAT', `PIPES_AS_CONCAT', `ANSI_QUOTES',
     `IGNORE_SPACE'.

     `ANSI' mode also causes the server to return an error for queries
     where a set function S with an outer reference `S(OUTER_REF)'
     cannot be aggregated in the outer query against which the outer
     reference has been resolved. This is such a query:

          SELECT * FROM t1 WHERE t1.a IN (SELECT MAX(t1.b) FROM t2 WHERE ...);

     Here, `MAX(t1.b)' cannot aggregated in the outer query because it
     appears in the `WHERE' clause of that query. Standard SQL requires
     an error in this situation. If `ANSI' mode is not enabled, the
     server treats `S(OUTER_REF)' in such queries the same way that it
     would interpret `S(CONST)'.

     See *Note ansi-mode::.

   *  `DB2'

     Equivalent to `PIPES_AS_CONCAT', `ANSI_QUOTES', `IGNORE_SPACE',
     `NO_KEY_OPTIONS', `NO_TABLE_OPTIONS', `NO_FIELD_OPTIONS'.

   *  `MAXDB'

     Equivalent to `PIPES_AS_CONCAT', `ANSI_QUOTES', `IGNORE_SPACE',
     `NO_KEY_OPTIONS', `NO_TABLE_OPTIONS', `NO_FIELD_OPTIONS',
     `NO_AUTO_CREATE_USER'.

   *  `MSSQL'

     Equivalent to `PIPES_AS_CONCAT', `ANSI_QUOTES', `IGNORE_SPACE',
     `NO_KEY_OPTIONS', `NO_TABLE_OPTIONS', `NO_FIELD_OPTIONS'.

   *  `MYSQL323'

     Equivalent to `NO_FIELD_OPTIONS', `HIGH_NOT_PRECEDENCE'.

   *  `MYSQL40'

     Equivalent to `NO_FIELD_OPTIONS', `HIGH_NOT_PRECEDENCE'.

   *  `ORACLE'

     Equivalent to `PIPES_AS_CONCAT', `ANSI_QUOTES', `IGNORE_SPACE',
     `NO_KEY_OPTIONS', `NO_TABLE_OPTIONS', `NO_FIELD_OPTIONS',
     `NO_AUTO_CREATE_USER'.

   *  `POSTGRESQL'

     Equivalent to `PIPES_AS_CONCAT', `ANSI_QUOTES', `IGNORE_SPACE',
     `NO_KEY_OPTIONS', `NO_TABLE_OPTIONS', `NO_FIELD_OPTIONS'.

   *  `TRADITIONAL'

     Equivalent to `STRICT_TRANS_TABLES', `STRICT_ALL_TABLES',
     `NO_ZERO_IN_DATE', `NO_ZERO_DATE', `ERROR_FOR_DIVISION_BY_ZERO',
     `NO_AUTO_CREATE_USER', and `NO_ENGINE_SUBSTITUTION'.


File: manual.info,  Node: server-plugins,  Next: ipv6-support,  Prev: server-sql-mode,  Up: mysqld-server

5.1.8 Server Plugins
--------------------

* Menu:

* server-plugin-loading::        Installing and Uninstalling Plugins
* obtaining-plugin-information::  Obtaining Server Plugin Information

MySQL supports a plugin API that enables creation of server components.
Plugins can be loaded at server startup, or loaded and unloaded at
runtime without restarting the server. The components supported by this
interface include, but are not limited to, storage engines, full-text
parser plugins, partitioning support, and server extensions.


File: manual.info,  Node: server-plugin-loading,  Next: obtaining-plugin-information,  Prev: server-plugins,  Up: server-plugins

5.1.8.1 Installing and Uninstalling Plugins
...........................................

Server plugins must be loaded in to the server before they can be used.
MySQL enables you to load a plugin at server startup or at runtime. It
is also possible to control the activation of loaded plugins at
startup, and to unload them at runtime.

   * Installing plugins

   * Controlling plugin activation

   * Uninstalling plugins

* Installing Plugins *

Server plugins must be known to the server before they can be used. A
plugin can be made known several ways, as described here. In the
following descriptions, PLUGIN_NAME stands for a plugin name such as
`innodb' or `csv'.

*Built-in plugins:*

A plugin that is built in to the server is known by the server
automatically. Normally, the server enables the plugin at startup,
although this can be changed with the `--PLUGIN_NAME' option.

*Plugins registered in the `mysql.plugin' table:*

The `mysql.plugin' table serves as a registry of plugins. The server
normally enables each plugin listed in the table at startup, although
whether a given plugin is enabled can be changed with the
`--PLUGIN_NAME' option. If the server is started with the
`--skip-grant-tables' option, it does not consult this table and does
not load the plugins listed there.

*Plugins named with the `--plugin-load' option:*

A plugin that is located in a plugin library file can be loaded at
server startup with the `--plugin-load' option. Normally, the server
enables the plugin at startup, although this can be changed with the
`--PLUGIN_NAME' option.

The option value is a semicolon-separated list of `NAME=PLUGIN_LIBRARY'
pairs. Each NAME is the name of the plugin, and PLUGIN_LIBRARY is the
name of the shared library that contains the plugin code. If a plugin
library is named without any preceding plugin name, the server loads
all plugins in the library. Each library file must be located in the
directory named by the `plugin_dir' system variable.

This option does not register any plugin in the `mysql.plugin' table.
For subsequent restarts, the server loads the plugin again only if
`--plugin-load' is given again.  That is, this option effects a
one-time installation that persists only for one server invocation.

`--plugin-load' enables plugins to be loaded even when
`--skip-grant-tables' is given (which causes the server to ignore the
`mysql.plugin' table).  `--plugin-load' also enables plugins to be
loaded at startup under configurations when plugins cannot be loaded at
runtime.

*Plugins installed with the *Note `INSTALL PLUGIN': install-plugin.
statement:*

A plugin that is located in a plugin library file can be loaded at
runtime with the `INSTALL PLUGIN' statement. The statement also
registers the plugin in the `mysql.plugin' table to cause the server to
load it on subsequent restarts. For this reason, `INSTALL PLUGIN'
requires the `INSERT' privilege for the `mysql.plugin' table.

If a plugin is named both using a `--plugin-load' option and in the
`mysql.plugin' table, the server starts but writes these messages to
the error log:

     100310 19:15:44 [ERROR] Function 'PLUGIN_NAME' already exists
     100310 19:15:44 [Warning] Couldn't load plugin named 'PLUGIN_NAME'
     with soname 'PLUGIN_OBJECT_FILE'.

Example: The `--plugin-load' option installs a plugin at server
startup. To install a plugin named `myplugin' in a plugin library file
named `somepluglib.so', use these lines in a `my.cnf' file:

     [mysqld]
     plugin-load=myplugin=somepluglib.so

In this case, the plugin is not registered in `mysql.plugin'.
Restarting the server without the `--plugin-load' option causes the
plugin not to be loaded at startup.

Alternatively, the *Note `INSTALL PLUGIN': install-plugin.  statement
causes the server to load the plugin code from the library file at
runtime:

     mysql> INSTALL PLUGIN myplugin SONAME 'somepluglib.so';

*Note `INSTALL PLUGIN': install-plugin. also causes `permanent' plugin
registration: The server lists the plugin in the `mysql.plugin' table to
ensure that it is loaded on subsequent server restarts.

Many plugins can be loaded either at server startup or at runtime.
However, if a plugin is designed such that it must be loaded and
initialized during server startup, use `--plugin-load' rather than
*Note `INSTALL PLUGIN': install-plugin.

While a plugin is loaded, information about it is available at runtime
from several sources, such as the *Note `INFORMATION_SCHEMA.PLUGINS':
plugins-table. table and the *Note `SHOW PLUGINS': show-plugins.
statement.  For more information, see *Note
obtaining-plugin-information::.

* Controlling Plugin Activation *

If the server knows about a plugin when it starts (for example, because
the plugin is named using a `--plugin-load' option or registered in the
`mysql.plugin' table), the server loads and enables the plugin by
default. It is possible to control activation for such a plugin using a
`--PLUGIN_NAME[=VALUE]' startup option named after the plugin. In the
following descriptions, PLUGIN_NAME stands for a plugin name such as
`innodb' or `csv'. As with other options, dashes and underscores are
interchangeable in option names. For example, `--my_plugin=ON' and
`--my-plugin=ON' are equivalent.

   * `--PLUGIN_NAME=OFF'

     Tells the server to disable the plugin.

   * `--PLUGIN_NAME[=ON]'

     Tells the server to enable the plugin. (Specifying the option as
     `--PLUGIN_NAME' without a value has the same effect.) If the
     plugin fails to initialize, the server runs with the plugin
     disabled.

   * `--PLUGIN_NAME=FORCE'

     Tells the server to enable the plugin, but if plugin
     initialization fails, the server does not start. In other words,
     this option forces the server to run with the plugin enabled or
     not at all.

   * `--PLUGIN_NAME=FORCE_PLUS_PERMANENT'

     Like `FORCE', but in addition prevents the plugin from being
     unloaded at runtime. If a user attempts to do so with *Note
     `UNINSTALL PLUGIN': uninstall-plugin, an error occurs. This value
     is available as of MySQL 5.5.7.

The values `OFF', `ON', `FORCE', and `FORCE_PLUS_PERMANENT' are not
case sensitive.

The activation state for plugins is visible in the `LOAD_OPTION' column
of the *Note `INFORMATION_SCHEMA.PLUGINS': plugins-table. table.

Suppose that `CSV', `BLACKHOLE', and `ARCHIVE' are built-in pluggable
storage engines and that you want the server to load them at startup,
subject to these conditions: The server is permitted to run if `CSV'
initialization fails, but must require that `BLACKHOLE' initialization
succeeds, and `ARCHIVE' should be disabled. To accomplish that, use
these lines in an option file:

     [mysqld]
     csv=ON
     blackhole=FORCE
     archive=OFF

The `--enable-PLUGIN_NAME' option format is supported as a synonym for
`--PLUGIN_NAME=ON'.  The `--disable-PLUGIN_NAME' and
`--skip-PLUGIN_NAME' option formats are supported as synonyms for
`--PLUGIN_NAME=OFF'.

Before MySQL 5.1.36, plugin options are boolean options (see *Note
option-modifiers::). That is, any of these options enable the plugin:

     --PLUGIN_NAME
     --PLUGIN_NAME=1
     --enable-PLUGIN_NAME

And these options disable the plugin:

     --PLUGIN_NAME=0
     --disable-PLUGIN_NAME
     --skip-PLUGIN_NAME

If you upgrade to MySQL 5.5 from a version older than 5.1.36 and
previously used options of the form `--PLUGIN_NAME=0' or
`--PLUGIN_NAME=1', the equivalent options are now `--PLUGIN_NAME=OFF'
and `--PLUGIN_NAME=ON', respectively. You also have the choice of
requiring plugins to start successfully by using `--PLUGIN_NAME=FORCE'
or `--PLUGIN_NAME=FORCE_PLUS_PERMANENT'.

If a plugin is disabled, either explicitly with `OFF' or implicitly
because it was enabled with `ON' but failed to initialize, aspects of
server operation that require the plugin will change. For example, if
the plugin implements a storage engine, existing tables for the storage
engine become inaccessible, and attempts to create new tables for the
storage engine result in tables that use the default storage engine
unless the `NO_ENGINE_SUBSTITUTION' SQL mode has been enabled to cause
an error to occur instead.

Disabling a plugin may require adjustment to other options. For
example, if you start the server using `--skip-innodb' to disable *Note
`InnoDB': innodb-storage-engine, other `innodb_XXX' options likely will
need to be omitted from the startup command.  In addition, because
*Note `InnoDB': innodb-storage-engine. is the default storage engine,
it will not start unless you specify another available storage engine
with `--default-storage-engine'.

* Uninstalling Plugins *

A plugin known to the server can be uninstalled to disable it at
runtime with the *Note `UNINSTALL PLUGIN': uninstall-plugin.
statement. The statement unloads the plugin and removes it from the
`mysql.plugin' table if it is registered there. For this reason, *Note
`UNINSTALL PLUGIN': uninstall-plugin. statement requires the `DELETE'
privilege for the `mysql.plugin' table. With the plugin no longer
registered in the table, the server will not load the plugin
automatically for subsequent restarts.

*Note `UNINSTALL PLUGIN': uninstall-plugin. can unload plugins
regardless of whether they were loaded with *Note `INSTALL PLUGIN':
install-plugin. or `--plugin-load'.

*Note `UNINSTALL PLUGIN': uninstall-plugin. is subject to these
exceptions:

   * It cannot unload plugins that are built in to the server.  These
     can be identified as those that have a library name of `NULL' in
     the output from *Note `INFORMATION_SCHEMA.PLUGINS': plugins-table.
     or *Note `SHOW PLUGINS': show-plugins.

   * It cannot unload plugins for which the server was started with
     `--PLUGIN_NAME=FORCE_PLUS_PERMANENT', which prevents plugin
     unloading at runtime. These can be identified from the
     `LOAD_OPTION' column of the *Note `INFORMATION_SCHEMA.PLUGINS':
     plugins-table.  table.


File: manual.info,  Node: obtaining-plugin-information,  Prev: server-plugin-loading,  Up: server-plugins

5.1.8.2 Obtaining Server Plugin Information
...........................................

There are several ways to determine which plugins are installed in the
server:

   * The *Note `INFORMATION_SCHEMA.PLUGINS': plugins-table.  table
     contains a row for each loaded plugin. Any that have a
     `PLUGIN_LIBRARY' value of `NULL' are built in and cannot be
     unloaded.

          mysql> SELECT * FROM information_schema.PLUGINS\G
          *************************** 1. row ***************************
                     PLUGIN_NAME: binlog
                  PLUGIN_VERSION: 1.0
                   PLUGIN_STATUS: ACTIVE
                     PLUGIN_TYPE: STORAGE ENGINE
             PLUGIN_TYPE_VERSION: 50158.0
                  PLUGIN_LIBRARY: NULL
          PLUGIN_LIBRARY_VERSION: NULL
                   PLUGIN_AUTHOR: MySQL AB
              PLUGIN_DESCRIPTION: This is a pseudo storage engine to represent the binlog in a transaction
                  PLUGIN_LICENSE: GPL
                     LOAD_OPTION: FORCE
          ...
          *************************** 10. row ***************************
                     PLUGIN_NAME: InnoDB
                  PLUGIN_VERSION: 1.0
                   PLUGIN_STATUS: ACTIVE
                     PLUGIN_TYPE: STORAGE ENGINE
             PLUGIN_TYPE_VERSION: 50158.0
                  PLUGIN_LIBRARY: ha_innodb_plugin.so
          PLUGIN_LIBRARY_VERSION: 1.0
                   PLUGIN_AUTHOR: Innobase Oy
              PLUGIN_DESCRIPTION: Supports transactions, row-level locking,
                                  and foreign keys
                  PLUGIN_LICENSE: GPL
                     LOAD_OPTION: ON
          ...

   * The *Note `SHOW PLUGINS': show-plugins. statement displays a row
     for each loaded plugin. Any that have a `Library' value of `NULL'
     are built in and cannot be unloaded.

          mysql> SHOW PLUGINS\G
          *************************** 1. row ***************************
             Name: binlog
           Status: ACTIVE
             Type: STORAGE ENGINE
          Library: NULL
          License: GPL
          ...
          *************************** 10. row ***************************
             Name: InnoDB
           Status: ACTIVE
             Type: STORAGE ENGINE
          Library: ha_innodb_plugin.so
          License: GPL
          ...

   * The `mysql.plugin' table shows which plugins have been registered
     with *Note `INSTALL PLUGIN': install-plugin. The table contains
     only plugin names and library file names, so it does not provide
     as much information as the *Note `PLUGINS': plugins-table. table
     or the *Note `SHOW PLUGINS': show-plugins. statement.


File: manual.info,  Node: ipv6-support,  Next: server-side-help-support,  Prev: server-plugins,  Up: mysqld-server

5.1.9 IPv6 Support
------------------

* Menu:

* ipv6-system-support::          Verifying System Support for IPv6
* ipv6-server-config::           Configuring the MySQL Server to Permit IPv6 Connections
* ipv6-local-connections::       Connecting Using the IPv6 Local Host Address
* ipv6-remote-connections::      Connecting Using IPv6 Nonlocal Host Addresses
* ipv6-brokers::                 Obtaining an IPv6 Address from a Broker

As of MySQL 5.5.3, support for IPv6 includes these capabilities:

   * MySQL Server can accept TCP/IP connections from clients connecting
     over IPv6. For example, this command connects over IPv6 to the
     MySQL server on the local host:

          shell> mysql -h ::1

     To use this capability, two things must be true:

        * Your system must be configured to support IPv6. See *Note
          ipv6-system-support::.

        * The default MySQL server configuration permits only IPv4
          connections, so the server must be configured for IPv6
          connections. To permit IPv6 connections in addition to or
          instead of IPv4 connections, start the server with an
          appropriate `--bind-address' option. See *Note
          server-system-variables::.

   * MySQL account names permit IPv6 addresses to enable DBAs to
     specify privileges for clients that connect to the server over
     IPv6. See *Note account-names::. IPv6 addresses can be specified
     in account names in statements such as *Note `CREATE USER':
     create-user, *Note `GRANT': grant, and *Note `REVOKE': revoke. For
     example:

          mysql> CREATE USER 'bill'@'::1' IDENTIFIED BY 'secret';
          mysql> GRANT SELECT ON mydb.* TO 'bill'@'::1';

The following sections describe how to set up MySQL so that clients can
connect to the server over IPv6.


File: manual.info,  Node: ipv6-system-support,  Next: ipv6-server-config,  Prev: ipv6-support,  Up: ipv6-support

5.1.9.1 Verifying System Support for IPv6
.........................................

Before MySQL Server can accept IPv6 connections, the operating system
on your server host must support IPv6. As a simple test to determine
whether that is true, try this command:

     shell> ping6 ::1
     16 bytes from ::1, icmp_seq=0 hlim=64 time=0.171 ms
     16 bytes from ::1, icmp_seq=1 hlim=64 time=0.077 ms
     ...

To produce a description of your system's network interfaces, invoke
`ifconfig -a' and look for IPv6 addresses in the output.

If your host does not support IPv6, consult your system documentation
for instructions on enabling it. It might be that you need only
reconfigure an existing network interface to add an IPv6 address. Or a
more extensive change might be needed, such as rebuilding the kernel
with IPv6 options enabled.

These links may be helpful in setting up IPv6 on various platforms:

   * Windows XP (http://support.microsoft.com/kb/2478747)

   * Gentoo Linux (http://www.gentoo.org/doc/en/ipv6.xml)

   * Ubuntu Linux (https://wiki.ubuntu.com/IPv6)

   * Linux (Generic)
     (http://www.redhat.com/mirrors/LDP/HOWTO/html_single/Linux+IPv6-HOWTO/)

   * Mac OS X (http://support.apple.com/kb/HT4667?viewlocale=en_US)


File: manual.info,  Node: ipv6-server-config,  Next: ipv6-local-connections,  Prev: ipv6-system-support,  Up: ipv6-support

5.1.9.2 Configuring the MySQL Server to Permit IPv6 Connections
...............................................................

The MySQL server listens on a single network socket for TCP/IP
connections. This socket is bound to a single address, but it is
possible for an address to map onto multiple network interfaces.  The
default address is `0.0.0.0'. To specify an address explicitly, use the
`--bind-address=ADDR' option at server startup, where ADDR is an IPv4
or IPv6 address or a host name. (IPv6 addresses are not supported
before MySQL 5.5.3.) If ADDR is a host name, the server resolves the
name to an IP address and binds to that address.

The server treats different types of addresses as follows:

   * If the address is `0.0.0.0', the server accepts TCP/IP connections
     on all server host IPv4 interfaces.

   * If the address is `::', the server accepts TCP/IP connections on
     all server host IPv4 and IPv6 interfaces. Use this address to
     permit both IPv4 and IPv6 connections on all server interfaces.

   * If the address is an IPv4-mapped address, the server accepts
     TCP/IP connections for that address, in either IPv4 or IPv6
     format. For example, if the server is bound to `::ffff:127.0.0.1',
     clients can connect using `--host=127.0.0.1' or
     `--host=::ffff:127.0.0.1'.

   * If the address is a `regular' IPv4 or IPv6 address (such as
     `127.0.0.1' or `::1'), the server accepts TCP/IP connections only
     for that IPv4 or IPv6 address.

If you intend to bind the server to a specific address, be sure that
the `mysql.user' grant table contains an account with administrative
privileges that you can use to connect to that address. Otherwise, you
will not be able to shut down the server. For example, if you bind the
server to `::', you can connect to it using all existing accounts. But
if you bind the server to `::1', it accepts connections only on that
address. In that case, first make sure that the `'root'@'::1'' account
is present in the `mysql.user' table so you can still connect to the
server to shut it down.


File: manual.info,  Node: ipv6-local-connections,  Next: ipv6-remote-connections,  Prev: ipv6-server-config,  Up: ipv6-support

5.1.9.3 Connecting Using the IPv6 Local Host Address
....................................................

The following procedure shows how to configure MySQL to permit IPv6
connections by clients that connect to the local server using the `::1'
local host address. The instructions given here assume that your system
supports IPv6.

  1. Start the MySQL server with an appropriate `--bind-address' option
     to permit it to accept IPv6 connections. For example, put the
     following lines in your server option file and restart the server:

          [mysqld]
          bind-address = ::

     Alternatively, you can bind the server to `::1', but that makes
     the server more restrictive for TCP/IP connections. It accepts
     only IPv6 connections for that single address and rejects IPv4
     connections. For more information, see *Note ipv6-server-config::.

  2. As an administrator, connect to the server and create an account
     for a local user who will connect from the `::1' local IPv6 host
     address:

          mysql> CREATE USER 'ipv6user'@'::1' IDENTIFIED BY 'ipv6pass';

     For the permitted syntax of IPv6 addresses in account names, see
     *Note account-names::. In addition to the *Note `CREATE USER':
     create-user. statement, you can issue *Note `GRANT': grant.
     statements that give specific privileges to the account, although
     that is not necessary for the remaining steps in this procedure.

  3. Invoke the *Note `mysql': mysql. client to connect to the server
     using the new account:

          shell> mysql -h ::1 -u ipv6user -pipv6pass

  4. Try some simple statements that show connection information:

          mysql> STATUS
          ...
          Connection:   ::1 via TCP/IP
          ...

          mysql> SELECT CURRENT_USER();
          +----------------+
          | CURRENT_USER() |
          +----------------+
          | ipv6user@::1   |
          +----------------+


File: manual.info,  Node: ipv6-remote-connections,  Next: ipv6-brokers,  Prev: ipv6-local-connections,  Up: ipv6-support

5.1.9.4 Connecting Using IPv6 Nonlocal Host Addresses
.....................................................

The following procedure shows how to configure MySQL to permit IPv6
connections by remote clients. It is similar to the preceding procedure
for local clients, but the server and client hosts are distinct and
each has its own nonlocal IPv6 address.  The example uses these
addresses:

     Server host: 2001:db8:0:f101::1
     Client host: 2001:db8:0:f101::2

These addresses are chosen from the nonroutable address range
recommended by IANA
(http://www.iana.org/assignments/ipv6-unicast-address-assignments/ipv6-unicast-address-assignments.xml)
for documentation purposes and suffice for testing on your local
network. To accept IPv6 connections from clients outside the local
network, the server host must have a public address. If your network
provider assigns you an IPv6 address, you can use that. Otherwise,
another way to obtain an address is to use an IPv6 broker; see *Note
ipv6-brokers::.

  1. Start the MySQL server with an appropriate `--bind-address' option
     to permit it to accept IPv6 connections. For example, put the
     following lines in your server option file and restart the server:

          [mysqld]
          bind-address = ::

     Alternatively, you can bind the server to `2001:db8:0:f101::1',
     but that makes the server more restrictive for TCP/IP connections.
     It accepts only IPv6 connections for that single address and
     rejects IPv4 connections. For more information, see *Note
     ipv6-server-config::.

  2. On the server host (`2001:db8:0:f101::1'), create an account for a
     user who will connect from the client host (`2001:db8:0:f101::2'):

          mysql> CREATE USER 'remoteipv6user'@'2001:db8:0:f101::2' IDENTIFIED BY 'remoteipv6pass';

  3. On the client host (`2001:db8:0:f101::2'), invoke the *Note
     `mysql': mysql. client to connect to the server using the new
     account:

          shell> mysql -h 2001:db8:0:f101::1 -u remoteipv6user -premoteipv6pass

  4. Try some simple statements that show connection information:

          mysql> STATUS
          ...
          Connection:   2001:db8:0:f101::1 via TCP/IP
          ...

          mysql> SELECT CURRENT_USER();
          +-----------------------------------+
          | CURRENT_USER()                    |
          +-----------------------------------+
          | remoteipv6user@2001:db8:0:f101::2 |
          +-----------------------------------+


File: manual.info,  Node: ipv6-brokers,  Prev: ipv6-remote-connections,  Up: ipv6-support

5.1.9.5 Obtaining an IPv6 Address from a Broker
...............................................

If you do not have a public IPv6 address that enables your system to
communicate over IPv6 outside your local network, you can obtain one
from an IPv6 broker. The Wikipedia IPv6 Tunnel Broker page
(http://en.wikipedia.org/wiki/List_of_IPv6_tunnel_brokers) lists
several brokers and their features, such as whether they provide static
addresses and the supported routing protocols.

After configuring your server host to use a broker-supplied IPv6
address, start the MySQL server with an appropriate `--bind-address'
option to permit the server to accept IPv6 connections. For example,
put the following lines in the server option file and restart the
server:

     [mysqld]
     bind-address = ::

Alternatively, you can bind the server to to the specific IPv6 address
provided by the broker, but that makes the server more restrictive for
TCP/IP connections. It accepts only IPv6 connections for that single
address and rejects IPv4 connections. For more information, see *Note
ipv6-server-config::. In addition, if the broker allocates dynamic
addresses, the address provided for your system might change the next
time you connect to the broker. If so, any accounts you create that
name the original address become invalid. To bind to a specific address
but avoid this change-of-address problem, you may be able to arrange
with the broker for a static IPv6 address.

The following example shows how to use Freenet6 as the broker and the
`gogoc' IPv6 client package on Gentoo Linux.

  1. Create a account at Freenet6 by visiting this URL and signing up:

          `http://gogonet.gogo6.com'

  2. After creating the account, go to this URL, sign in, and create a
     user ID and password for the IPv6 broker:

          `http://gogonet.gogo6.com/page/freenet6-registration'

  3. As `root', install `gogoc':

          shell> emerge gogoc

  4. Edit `/etc/gogoc/gogoc.conf' to set the `userid' and `password'
     values. For example:

          userid=gogouser
          passwd=gogopass

  5. Start `gogoc':

          shell> /etc/init.d/gogoc start

     To start `gogoc' each time your system boots, execute this command:

          shell> rc-update add gogoc default

  6. Use `ping6' to try to ping a host:

          shell> ping6 ipv6.google.com

  7. To see your IPv6 address:

          shell> ifconfig tun


File: manual.info,  Node: server-side-help-support,  Next: server-signal-response,  Prev: ipv6-support,  Up: mysqld-server

5.1.10 Server-Side Help
-----------------------

MySQL Server supports a *Note `HELP': help.  statement that returns
online information from the MySQL Reference manual (see *Note help::).
The proper operation of this statement requires that the help tables in
the `mysql' database be initialized with help topic information, which
is done by processing the contents of the `fill_help_tables.sql' script.

If you install MySQL using a binary or source distribution on Unix,
help table setup occurs when you run *Note `mysql_install_db':
mysql-install-db. For an RPM distribution on Linux or binary
distribution on Windows, help table setup occurs as part of the MySQL
installation process.

If you upgrade MySQL using a binary distribution, the help tables are
not upgraded automatically, but you can upgrade them manually.  Locate
the `fill_help_tables.sql' file in the `share' or `share/mysql'
directory. Change location into that directory and process the file
with the *Note `mysql': mysql. client as follows:

     shell> mysql -u root mysql < fill_help_tables.sql

You can also obtain the latest `fill_help_tables.sql' at any time to
upgrade your help tables. Download the proper file for your version of
MySQL from `http://dev.mysql.com/doc/index-other.html'. After
downloading and uncompressing the file, process it with *Note `mysql':
mysql. as described previously.

If you are working with Bazaar and a MySQL development source tree, you
will need to download the `fill_help_tables.sql' file because the tree
contains only a `stub' version.


File: manual.info,  Node: server-signal-response,  Next: server-shutdown,  Prev: server-side-help-support,  Up: mysqld-server

5.1.11 Server Response to Signals
---------------------------------

On Unix, signals can be sent to processes.  *Note `mysqld': mysqld.
responds to signals sent to it as follows:

   * `SIGTERM' causes the server to shut down.

   * `SIGHUP' causes the server to reload the grant tables and to flush
     tables, logs, the thread cache, and the host cache. These actions
     are like various forms of the *Note `FLUSH': flush. statement. The
     server also writes a status report to the error log that has this
     format:

          Status information:

          Current dir: /var/mysql/data/
          Running threads: 0  Stack size: 196608
          Current locks:

          Key caches:
          default
          Buffer_size:       8388600
          Block_size:           1024
          Division_limit:        100
          Age_limit:             300
          blocks used:             0
          not flushed:             0
          w_requests:              0
          writes:                  0
          r_requests:              0
          reads:                   0

          handler status:
          read_key:            0
          read_next:           0
          read_rnd             0
          read_first:          1
          write:               0
          delete               0
          update:              0

          Table status:
          Opened tables:          5
          Open tables:            0
          Open files:             7
          Open streams:           0

          Alarm status:
          Active alarms:   1
          Max used alarms: 2
          Next alarm time: 67

On some Mac OS X 10.3 versions, *Note `mysqld': mysqld. ignores
`SIGHUP' and `SIGQUIT'.


File: manual.info,  Node: server-shutdown,  Prev: server-signal-response,  Up: mysqld-server

5.1.12 The Shutdown Process
---------------------------

The server shutdown process takes place as follows:

  1. The shutdown process is initiated.

     This can occur initiated several ways. For example, a user with
     the `SHUTDOWN' privilege can execute a *Note `mysqladmin
     shutdown': mysqladmin. command.  *Note `mysqladmin': mysqladmin.
     can be used on any platform supported by MySQL. Other operating
     system-specific shutdown initiation methods are possible as well:
     The server shuts down on Unix when it receives a `SIGTERM' signal.
     A server running as a service on Windows shuts down when the
     services manager tells it to.

  2. The server creates a shutdown thread if necessary.

     Depending on how shutdown was initiated, the server might create a
     thread to handle the shutdown process. If shutdown was requested
     by a client, a shutdown thread is created. If shutdown is the
     result of receiving a `SIGTERM' signal, the signal thread might
     handle shutdown itself, or it might create a separate thread to do
     so. If the server tries to create a shutdown thread and cannot
     (for example, if memory is exhausted), it issues a diagnostic
     message that appears in the error log:

          Error: Can't create thread to kill server

  3. The server stops accepting new connections.

     To prevent new activity from being initiated during shutdown, the
     server stops accepting new client connections by closing the
     handlers for the network interfaces to which it normally listens
     for connections: the TCP/IP port, the Unix socket file, the
     Windows named pipe, and shared memory on Windows.

  4. The server terminates current activity.

     For each thread associated with a client connection, the server
     breaks the connection to the client and marks the thread as
     killed. Threads die when they notice that they are so marked.
     Threads for idle connections die quickly. Threads that currently
     are processing statements check their state periodically and take
     longer to die. For additional information about thread
     termination, see *Note kill::, in particular for the instructions
     about killed *Note `REPAIR TABLE': repair-table. or *Note
     `OPTIMIZE TABLE': optimize-table. operations on `MyISAM' tables.

     For threads that have an open transaction, the transaction is
     rolled back. Note that if a thread is updating a nontransactional
     table, an operation such as a multiple-row *Note `UPDATE': update.
     or *Note `INSERT': insert. may leave the table partially updated
     because the operation can terminate before completion.

     If the server is a master replication server, it treats threads
     associated with currently connected slaves like other client
     threads. That is, each one is marked as killed and exits when it
     next checks its state.

     If the server is a slave replication server, it stops the I/O and
     SQL threads, if they are active, before marking client threads as
     killed. The SQL thread is permitted to finish its current
     statement (to avoid causing replication problems), and then stops.
     If the SQL thread is in the middle of a transaction at this point,
     the server waits until the current replication event group (if
     any) has finished executing, or until the user issues a *Note
     `KILL QUERY': kill. or *Note `KILL CONNECTION': kill. statement.
     See also *Note stop-slave::.

     If the slave is updating a nontransactional table when it is
     forcibly killed, the slave's data may become inconsistent with the
     master.

  5. The server shuts down or closes storage engines.

     At this stage, the server flushes the table cache and closes all
     open tables.

     Each storage engine performs any actions necessary for tables that
     it manages. For example, `MyISAM' flushes any pending index writes
     for a table.  `InnoDB' flushes its buffer pool to disk (unless
     `innodb_fast_shutdown' is 2), writes the current LSN to the
     tablespace, and terminates its own internal threads.

  6. The server exits.


File: manual.info,  Node: server-logs,  Next: multiple-servers,  Prev: mysqld-server,  Up: server-administration

5.2 MySQL Server Logs
=====================

* Menu:

* log-destinations::             Selecting General Query and Slow Query Log Output Destinations
* error-log::                    The Error Log
* query-log::                    The General Query Log
* binary-log::                   The Binary Log
* slow-query-log::               The Slow Query Log
* log-file-maintenance::         Server Log Maintenance

MySQL Server has several logs that can help you find out what activity
is taking place.

This table lists MySQL Server log types and describes the information
written to each log.

Log Type               Information Written to Log
Error log              Problems encountered starting, running, or
                       stopping *Note `mysqld': mysqld.
General query log      Established client connections and statements
                       received from clients
Binary log             Statements that change data (also used for
                       replication)
Relay log              Data changes received from a replication master
                       server
Slow query log         Queries that took more than `long_query_time'
                       seconds to execute

By default, no logs are enabled (except the error log on Windows).  The
following log-specific sections provide information about the server
options that enable logging.

By default, the server writes files for all enabled logs in the data
directory. You can force the server to close and reopen the log files
(or in some cases switch to a new log file) by flushing the logs. Log
flushing occurs when you issue a *Note `FLUSH LOGS': flush.  statement;
execute *Note `mysqladmin': mysqladmin. with a `flush-logs' or `refresh'
argument; or execute *Note `mysqldump': mysqldump. with a
`--flush-logs' or `--master-data' option. See *Note flush::, *Note
mysqladmin::, and *Note mysqldump::. In addition, the binary log is
flushed when its size reaches the value of the `max_binlog_size' system
variable.

You can control the general query and slow query logs during runtime.
You can enable or disable logging, or change the log file name. You can
tell the server to write general query and slow query entries to log
tables, log files, or both. For details, see *Note log-destinations::,
*Note query-log::, and *Note slow-query-log::.

The relay log is used only on slave replication servers, to hold data
changes from the master server that must also be made on the slave. For
discussion of relay log contents and configuration, see *Note
slave-logs-relaylog::.

For information about log maintenance operations such as expiration of
old log files, see *Note log-file-maintenance::.

For information about keeping logs secure, see *Note password-logging::.


File: manual.info,  Node: log-destinations,  Next: error-log,  Prev: server-logs,  Up: server-logs

5.2.1 Selecting General Query and Slow Query Log Output Destinations
--------------------------------------------------------------------

MySQL Server provides flexible control over the destination of output
to the general query log and the slow query log, if those logs are
enabled. Possible destinations for log entries are log files or the
`general_log' and `slow_log' tables in the `mysql' database. Either or
both destinations can be selected.

Before MySQL 5.5.7, logging to tables incurs significantly more server
overhead than logging to files. If you enable the general log or slow
query log and require highest performance, you should use file logging,
not table logging.

*Log control at server startup.* The `--log-output' option specifies
the destination for log output. This option does not in itself enable
the logs. Its syntax is `--log-output[=VALUE,...]':

   * If `--log-output' is given with a value, the value should be a
     comma-separated list of one or more of the words `TABLE' (log to
     tables), `FILE' (log to files), or `NONE' (do not log to tables or
     files).  `NONE', if present, takes precedence over any other
     specifiers.

   * If `--log-output' is omitted, the default logging destination is
     `FILE'.

The `general_log' system variable controls logging to the general query
log for the selected log destinations. If specified at server startup,
`general_log' takes an optional argument of 1 or 0 to enable or disable
the log. To specify a file name other than the default for file
logging, set the `general_log_file' variable.  Similarly, the
`slow_query_log' variable controls logging to the slow query log for
the selected destinations and setting `slow_query_log_file' specifies a
file name for file logging. If either log is enabled, the server opens
the corresponding log file and writes startup messages to it. However,
further logging of queries to the file does not occur unless the `FILE'
log destination is selected.

Examples:

   * To write general query log entries to the log table and the log
     file, use `--log-output=TABLE,FILE' to select both log
     destinations and `--general_log' to enable the general query log.

   * To write general and slow query log entries only to the log
     tables, use `--log-output=TABLE' to select tables as the log
     destination and `--general_log' and `--slow_query_log' to enable
     both logs.

   * To write slow query log entries only to the log file, use
     `--log-output=FILE' to select files as the log destination and
     `--slow_query_log' to enable the slow query log. (In this case,
     because the default log destination is `FILE', you could omit the
     `--log-output' option.)

*Log control at runtime.* The system variables associated with log
tables and files enable runtime control over logging:

   * The global `log_output' system variable indicates the current
     logging destination. It can be modified at runtime to change the
     destination.

   * The global `general_log' and `slow_query_log' variables indicate
     whether the general query log and slow query log are enabled
     (`ON') or disabled (`OFF'). You can set these variables at runtime
     to control whether the logs are enabled.

   * The global `general_log_file' and `slow_query_log_file' variables
     indicate the names of the general query log and slow query log
     files. You can set these variables at server startup or at runtime
     to change the names of the log files.

   * To disable or enable general query logging for the current
     connection, set the session `sql_log_off' variable to `ON' or
     `OFF'.

The use of tables for log output offers the following benefits:

   * Log entries have a standard format. To display the current
     structure of the log tables, use these statements:

          SHOW CREATE TABLE mysql.general_log;
          SHOW CREATE TABLE mysql.slow_log;

   * Log contents are accessible through SQL statements. This enables
     the use of queries that select only those log entries that satisfy
     specific criteria. For example, to select log contents associated
     with a particular client (which can be useful for identifying
     problematic queries from that client), it is easier to do this
     using a log table than a log file.

   * Logs are accessible remotely through any client that can connect
     to the server and issue queries (if the client has the appropriate
     log table privileges). It is not necessary to log in to the server
     host and directly access the file system.

The log table implementation has the following characteristics:

   * In general, the primary purpose of log tables is to provide an
     interface for users to observe the runtime execution of the
     server, not to interfere with its runtime execution.

   * *Note `CREATE TABLE': create-table, *Note `ALTER TABLE':
     alter-table, and *Note `DROP TABLE': drop-table. are valid
     operations on a log table. For *Note `ALTER TABLE': alter-table.
     and *Note `DROP TABLE': drop-table, the log table cannot be in use
     and must be disabled, as described later.

   * By default, the log tables use the `CSV' storage engine that
     writes data in comma-separated values format. For users who have
     access to the `.CSV' files that contain log table data, the files
     are easy to import into other programs such as spreadsheets that
     can process CSV input.

     The log tables can be altered to use the `MyISAM' storage engine.
     You cannot use *Note `ALTER TABLE': alter-table. to alter a log
     table that is in use. The log must be disabled first. No engines
     other than `CSV' or `MyISAM' are legal for the log tables.

   * To disable logging so that you can alter (or drop) a log table,
     you can use the following strategy. The example uses the general
     query log; the procedure for the slow query log is similar but
     uses the `slow_log' table and `slow_query_log' system variable.

          SET @old_log_state = @@global.general_log;
          SET GLOBAL general_log = 'OFF';
          ALTER TABLE mysql.general_log ENGINE = MyISAM;
          SET GLOBAL general_log = @old_log_state;

   * *Note `TRUNCATE TABLE': truncate-table. is a valid operation on a
     log table. It can be used to expire log entries.

   * *Note `RENAME TABLE': rename-table. is a valid operation on a log
     table. You can atomically rename a log table (to perform log
     rotation, for example) using the following strategy:

          USE mysql;
          DROP TABLE IF EXISTS general_log2;
          CREATE TABLE general_log2 LIKE general_log;
          RENAME TABLE general_log TO general_log_backup, general_log2 TO general_log;

   * As of MySQL 5.5.7, *Note `CHECK TABLE': check-table.  is a valid
     operation on a log table.

   * *Note `LOCK TABLES': lock-tables. cannot be used on a log table.

   * *Note `INSERT': insert, *Note `DELETE': delete, and *Note
     `UPDATE': update. cannot be used on a log table. These operations
     are permitted only internally to the server itself.

   * *Note `FLUSH TABLES WITH READ LOCK': flush. and the state of the
     global `read_only' system variable have no effect on log tables.
     The server can always write to the log tables.

   * Entries written to the log tables are not written to the binary
     log and thus are not replicated to slave servers.

   * To flush the log tables or log files, use *Note `FLUSH TABLES':
     flush.  or *Note `FLUSH LOGS': flush, respectively.

   * Partitioning of log tables is not permitted.

   * Before MySQL 5.5.25, *Note `mysqldump': mysqldump. does not dump
     the `general_log' or `slow_query_log' tables for dumps of the
     `mysql' database. As of 5.5.25, the dump includes statements to
     recreate those tables so that they are not missing after reloading
     the dump file. Log table contents are not dumped.


File: manual.info,  Node: error-log,  Next: query-log,  Prev: log-destinations,  Up: server-logs

5.2.2 The Error Log
-------------------

The error log contains information indicating when *Note `mysqld':
mysqld. was started and stopped and also any critical errors that occur
while the server is running. If *Note `mysqld': mysqld. notices a table
that needs to be automatically checked or repaired, it writes a message
to the error log.

On some operating systems, the error log contains a stack trace if
*Note `mysqld': mysqld. dies. The trace can be used to determine where
*Note `mysqld': mysqld. died. See *Note porting::.

In the following discussion, `console' means `stderr', the standard
error output; this is your terminal or console window unless the
standard error output has been redirected. (For example, if invoked
with the `--syslog' option, *Note `mysqld_safe': mysqld-safe. arranges
for the server's `stderr' to be sent to the `syslog' facility, as
described later.)

On Windows, the `--log-error' and `--console' options both affect error
logging:

   * Without `--log-error', *Note `mysqld': mysqld. writes error
     messages to `HOST_NAME.err' in the data directory.

   * With `--log-error[=FILE_NAME]', *Note `mysqld': mysqld. writes
     error messages to an error log file. The server uses the named
     file if present, creating it in in the data directory unless an
     absolute path name is given to specify a different directory. If
     no file is named, the default name is `HOST_NAME.err' in the data
     directory.

   * If `--console' is given, *Note `mysqld': mysqld. writes error
     messages to the console, unless `--log-error' is also given. If
     both options are present, `--console' is ignored and has no
     effect. Their order does not matter: `--log-error' takes precedence
     and error messages go to a log file. (Before MySQL 5.5.3, if both
     options are given, the last one takes precedence.)

In addition, on Windows, events and error messages are written to the
Windows Event Log within the Application log. Entries marked as
`Warning' and `Note' are written to the Event Log, but not
informational messages such as information statements from individual
storage engines. These log entries have a source of `MySQL'. You cannot
disable writing information to the Windows Event Log.

On Unix and Unix-like systems, *Note `mysqld': mysqld. writes error log
messages as follows:

   * Without `--log-error', *Note `mysqld': mysqld. writes error
     messages to the console.

   * With `--log-error[=`file_name']', *Note `mysqld': mysqld. writes
     error messages to an error log file. The server uses the named
     file if present, creating it in the data directory unless an
     absolute path name is given to specify a different directory. If
     no file is named, the default name is `HOST_NAME.err' in the data
     directory.

At runtime, `log_error' system variable indicates the the error log
file name if error output is written to a file.

If you flush the logs using *Note `FLUSH LOGS': flush. or *Note
`mysqladmin flush-logs': mysqladmin. and *Note `mysqld': mysqld. is
writing the error log to a file (for example, if it was started with the
`--log-error' option), the effect is version dependent:

   * As of MySQL 5.5.7, the server closes and reopens the log file.  To
     rename the file, do so manually before flushing. Then flushing the
     logs reopens a new file with the original file name. For example,
     you can rename the file and create a new one using the following
     commands:

          shell> mv HOST_NAME.err HOST_NAME.err-old
          shell> mysqladmin flush-logs
          shell> mv HOST_NAME.err-old BACKUP-DIRECTORY

     On Windows, use `rename' rather than `mv'.

   * Prior to MySQL 5.5.7, the server renames the current log file with
     the suffix `-old', then creates a new empty log file. Be aware
     that a second log-flushing operation thus causes the original
     error log file to be lost unless you save it under a different
     name. On Windows, you cannot rename the error log while the server
     has it open before MySQL 5.5.7.  To avoid a restart, flush the
     logs first to cause the server to rename the original file and
     create a new one, then save the renamed file. That also works on
     Unix, or you can use the commands shown earlier.

No error log renaming occurs when the logs are flushed in any case if
the server is not writing to a named file.

If you use *Note `mysqld_safe': mysqld-safe. to start *Note `mysqld':
mysqld, *Note `mysqld_safe': mysqld-safe. arranges for *Note `mysqld':
mysqld. to write error messages to a log file or to `syslog'.  *Note
`mysqld_safe': mysqld-safe. has three error-logging options, `--syslog',
`--skip-syslog', and `--log-error'. The default with no logging options
or with `--skip-syslog' is to use the default log file. To explicitly
specify use of an error log file, specify `--log-error=FILE_NAME' to
*Note `mysqld_safe': mysqld-safe, and *Note `mysqld_safe': mysqld-safe.
will arrange for *Note `mysqld': mysqld. to write messages to a log
file. To use `syslog' instead, specify the `--syslog' option.

If you specify `--log-error' in an option file in a `[mysqld]',
`[server]', or `[mysqld_safe]' section, *Note `mysqld_safe':
mysqld-safe. will find and use the option.

If *Note `mysqld_safe': mysqld-safe. is used to start *Note `mysqld':
mysqld. and *Note `mysqld': mysqld. dies unexpectedly, *Note
`mysqld_safe': mysqld-safe. notices that it needs to restart *Note
`mysqld': mysqld. and writes a `restarted mysqld' message to the error
log.

The `--log-warnings' option or `log_warnings' system variable can be
used to control warning logging to the error log. The default value is
enabled (1). Warning logging can be disabled using a value of 0. If the
value is greater than 1, aborted connections are written to the error
log, and access-denied errors for new connection attempts are written.
See *Note communication-errors::.


File: manual.info,  Node: query-log,  Next: binary-log,  Prev: error-log,  Up: server-logs

5.2.3 The General Query Log
---------------------------

The general query log is a general record of what *Note `mysqld':
mysqld. is doing. The server writes information to this log when
clients connect or disconnect, and it logs each SQL statement received
from clients. The general query log can be very useful when you suspect
an error in a client and want to know exactly what the client sent to
*Note `mysqld': mysqld.

*Note `mysqld': mysqld. writes statements to the query log in the order
that it receives them, which might differ from the order in which they
are executed. This logging order is in contrast with that of the binary
log, for which statements are written after they are executed but
before any locks are released. In addition, the query log may contain
statements that only select data while such statements are never
written to the binary log.

When using statement-based logging all statements are written to the
query log, but when using row-based logging, updates are sent as row
changes rather than SQL statements, and thus these statements are never
written to the query log when `binlog_format' is `ROW'. A given update
also might not be written to the query log when this variable is set to
`MIXED', depending on the statement used. See *Note
replication-sbr-rbr::, for more information.

By default, the general query log is disabled. To specify the initial
general query log state explicitly, use `--general_log[={0|1}]'. With no
argument or an argument of 1, `--general_log' enables the log. With an
argument of 0, this option disables the log. To specify a log file
name, use `--general_log_file=FILE_NAME'.  To specify the log
destination, use `--log-output' (as described in *Note
log-destinations::). The older options to enable the general query log,
`--log' and `-l', are deprecated.

If you specify no name for the general query log file, the default name
is `HOST_NAME.log'. The server creates the file in the data directory
unless an absolute path name is given to specify a different directory.

To disable or enable the general query log or change the log file name
at runtime, use the global `general_log' and `general_log_file' system
variables. Set `general_log' to 0 (or `OFF') to disable the log or to 1
(or `ON') to enable it. Set `general_log_file' to specify the name of
the log file. If a log file already is open, it is closed and the new
file is opened.

When the general query log is enabled, the server writes output to any
destinations specified by the `--log-output' option or `log_output'
system variable. If you enable the log, the server opens the log file
and writes startup messages to it. However, further logging of queries
to the file does not occur unless the `FILE' log destination is
selected. If the destination is `NONE', the server writes no queries
even if the general log is enabled. Setting the log file name has no
effect on logging if the log destination value does not contain `FILE'.

Server restarts and log flushing do not cause a new general query log
file to be generated (although flushing closes and reopens it). To
rename the file and create a new one, use the following commands:

     shell> mv HOST_NAME.log HOST_NAME-old.log
     shell> mysqladmin flush-logs
     shell> mv HOST_NAME-old.log BACKUP-DIRECTORY

On Windows, use `rename' rather than `mv'.

You can also rename the general query log file at runtime by disabling
the log:

     SET GLOBAL general_log = 'OFF';

With the log disabled, rename the log file externally; for example,
from the command line. Then enable the log again:

     SET GLOBAL general_log = 'ON';

This method works on any platform and does not require a server restart.

The session `sql_log_off' variable can be set to `ON' or `OFF' to
disable or enable general query logging for the current connection.

The general query log should be protected because logged statements
might contain passwords. See *Note password-logging::.


File: manual.info,  Node: binary-log,  Next: slow-query-log,  Prev: query-log,  Up: server-logs

5.2.4 The Binary Log
--------------------

* Menu:

* binary-log-formats::           Binary Logging Formats
* binary-log-setting::           Setting The Binary Log Format
* binary-log-mixed::             Mixed Binary Logging Format
* binary-log-mysql-database::    Logging Format for Changes to `mysql' Database Tables

The binary log contains `events' that describe database changes such as
table creation operations or changes to table data. It also contains
events for statements that potentially could have made changes (for
example, a *Note `DELETE': delete. which matched no rows), unless
row-based logging is used. The binary log also contains information
about how long each statement took that updated data.  The binary log
has two important purposes:

   * For replication, the binary log on a master replication server
     provides a record of the data changes to be sent to slave servers.
     The master server sends the events contained in its binary log to
     its slaves, which execute those events to make the same data
     changes that were made on the master. See *Note
     replication-implementation::.

   * Certain data recovery operations require use of the binary log.
     After a backup has been restored, the events in the binary log
     that were recorded after the backup was made are re-executed.
     These events bring databases up to date from the point of the
     backup. See *Note point-in-time-recovery::.

The binary log is not used for statements such as *Note `SELECT':
select. or *Note `SHOW': show. that do not modify data. To log all
statements (for example, to identify a problem query), use the general
query log. See *Note query-log::.

Running a server with binary logging enabled makes performance slightly
slower. However, the benefits of the binary log in enabling you to set
up replication and for restore operations generally outweigh this minor
performance decrement.

The binary log should be protected because logged statements might
contain passwords. See *Note password-logging::.

The following discussion describes some of the server options and
variables that affect the operation of binary logging. For a complete
list, see *Note replication-options-binary-log::.

To enable the binary log, start the server with the
`--log-bin[=BASE_NAME]' option. If no BASE_NAME value is given, the
default name is the value of the `pid-file' option (which by default is
the name of host machine) followed by `-bin'. If the basename is given,
the server writes the file in the data directory unless the basename is
given with a leading absolute path name to specify a different
directory. It is recommended that you specify a basename explicitly
rather than using the default of the host name; see *Note bugs::, for
the reason.

If you supply an extension in the log name (for example,
`--log-bin=BASE_NAME.EXTENSION'), the extension is silently removed and
ignored.

*Note `mysqld': mysqld. appends a numeric extension to the binary log
basename to generate binary log file names. The number increases each
time the server creates a new log file, thus creating an ordered series
of files. The server creates a new file in the series each time it
starts or flushes the logs. The server also creates a new binary log
file automatically after the current log's size reaches
`max_binlog_size'. A binary log file may become larger than
`max_binlog_size' if you are using large transactions because a
transaction is written to the file in one piece, never split between
files.

To keep track of which binary log files have been used, *Note `mysqld':
mysqld. also creates a binary log index file that contains the names of
all used binary log files. By default, this has the same basename as
the binary log file, with the extension `'.index''. You can change the
name of the binary log index file with the `--log-bin-index[=FILE_NAME]'
option. You should not manually edit this file while *Note `mysqld':
mysqld. is running; doing so would confuse *Note `mysqld': mysqld.

The term `binary log file' generally denotes an individual numbered
file containing database events. The term `binary log' collectively
denotes the set of numbered binary log files plus the index file.

A client that has the `SUPER' privilege can disable binary logging of
its own statements by using a `SET sql_log_bin=0' statement. See *Note
server-system-variables::.

The format of the events recorded in the binary log is dependent on the
binary logging format. Three format types are supported, row-based
logging, statement-based logging and mixed-base logging.  The binary
logging format used depends on the MySQL version. For general
descriptions of the logging formats, see *Note binary-log-formats::.
For detailed information about the format of the binary log, see MySQL
Internals: The Binary Log
(http://dev.mysql.com/doc/internals/en/binary-log.html).

The server evaluates the `--binlog-do-db' and `--binlog-ignore-db'
options in the same way as it does the `--replicate-do-db' and
`--replicate-ignore-db' options. For information about how this is
done, see *Note replication-rules-db-options::.

If you are replicating from a MySQL Cluster to a standalone MySQL
Server, you should be aware that the the *Note `NDB': mysql-cluster.
storage engine uses default values for some binary logging options
(including options specific to `NDB' such as
`--ndb-log-update-as-write') that differ from those used by other
storage engines. If not corrected for, these differences can lead to
divergence of the master's and slave's binary logs. For more
information, see *Note mysql-cluster-replication-ndb-to-non-ndb::. In
particular, if you are using a nontransactional storage engine such as
*Note `MyISAM': myisam-storage-engine. on the slave, see *Note
mysql-cluster-replication-ndb-to-nontransactional::.

A replication slave server by default does not write to its own binary
log any data modifications that are received from the replication
master. To log these modifications, start the slave with the
`--log-slave-updates' option in addition to the `--log-bin' option (see
*Note replication-options-slave::). This is done when a slave is also
to act as a master to other slaves in chained replication.

You can delete all binary log files with the *Note `RESET MASTER':
reset-master. statement, or a subset of them with *Note `PURGE BINARY
LOGS': purge-binary-logs. See *Note reset::, and *Note
purge-binary-logs::.

If you are using replication, you should not delete old binary log
files on the master until you are sure that no slave still needs to use
them. For example, if your slaves never run more than three days
behind, once a day you can execute *Note `mysqladmin flush-logs':
mysqladmin. on the master and then remove any logs that are more than
three days old. You can remove the files manually, but it is preferable
to use *Note `PURGE BINARY LOGS': purge-binary-logs, which also safely
updates the binary log index file for you (and which can take a date
argument). See *Note purge-binary-logs::.

You can display the contents of binary log files with the *Note
`mysqlbinlog': mysqlbinlog. utility. This can be useful when you want
to reprocess statements in the log for a recovery operation. For
example, you can update a MySQL server from the binary log as follows:

     shell> mysqlbinlog LOG_FILE | mysql -h SERVER_NAME

*Note `mysqlbinlog': mysqlbinlog. also can be used to display
replication slave relay log file contents because they are written
using the same format as binary log files. For more information on the
*Note `mysqlbinlog': mysqlbinlog. utility and how to use it, see *Note
mysqlbinlog::. For more information about the binary log and recovery
operations, see *Note point-in-time-recovery::.

Binary logging is done immediately after a statement or transaction
completes but before any locks are released or any commit is done. This
ensures that the log is logged in commit order.

Updates to nontransactional tables are stored in the binary log
immediately after execution.

Within an uncommitted transaction, all updates (*Note `UPDATE': update,
*Note `DELETE': delete, or *Note `INSERT': insert.) that change
transactional tables such as `InnoDB' tables are cached until a *Note
`COMMIT': commit. statement is received by the server. At that point,
*Note `mysqld': mysqld. writes the entire transaction to the binary log
before the *Note `COMMIT': commit. is executed.

Modifications to nontransactional tables cannot be rolled back. If a
transaction that is rolled back includes modifications to
nontransactional tables, the entire transaction is logged with a *Note
`ROLLBACK': commit.  statement at the end to ensure that the
modifications to those tables are replicated.

When a thread that handles the transaction starts, it allocates a
buffer of `binlog_cache_size' to buffer statements. If a statement is
bigger than this, the thread opens a temporary file to store the
transaction. The temporary file is deleted when the thread ends.

The `Binlog_cache_use' status variable shows the number of transactions
that used this buffer (and possibly a temporary file) for storing
statements. The `Binlog_cache_disk_use' status variable shows how many
of those transactions actually had to use a temporary file. These two
variables can be used for tuning `binlog_cache_size' to a large enough
value that avoids the use of temporary files.

The `max_binlog_cache_size' system variable (default 4GB, which is also
the maximum) can be used to restrict the total size used to cache a
multiple-statement transaction. If a transaction is larger than this
many bytes, it fails and rolls back. The minimum value is 4096.

If you are using the binary log and row based logging, concurrent
inserts are converted to normal inserts for `CREATE ...  SELECT' or
*Note `INSERT ... SELECT': insert-select. statements. This is done to
ensure that you can re-create an exact copy of your tables by applying
the log during a backup operation. If you are using statement-based
logging, the original statement is written to the log.

The binary log format has some known limitations that can affect
recovery from backups. See *Note replication-features::.

Binary logging for stored programs is done as described in *Note
stored-programs-logging::.

Note that the binary log format differs in MySQL 5.5 from previous
versions of MySQL, due to enhancements in replication. See *Note
replication-compatibility::.

Writes to the binary log file and binary log index file are handled in
the same way as writes to `MyISAM' tables. See *Note full-disk::.

By default, the binary log is not synchronized to disk at each write.
So if the operating system or machine (not only the MySQL server)
crashes, there is a chance that the last statements of the binary log
are lost. To prevent this, you can make the binary log be synchronized
to disk after every N writes to the binary log, with the `sync_binlog'
system variable. See *Note server-system-variables::. 1 is the safest
value for `sync_binlog', but also the slowest. Even with `sync_binlog'
set to 1, there is still the chance of an inconsistency between the
table content and binary log content in case of a crash. For example,
if you are using `InnoDB' tables and the MySQL server processes a *Note
`COMMIT': commit.  statement, it writes the whole transaction to the
binary log and then commits this transaction into `InnoDB'. If the
server crashes between those two operations, the transaction is rolled
back by `InnoDB' at restart but still exists in the binary log. To
resolve this, you should set `--innodb_support_xa' to 1. Although this
option is related to the support of XA transactions in InnoDB, it also
ensures that the binary log and InnoDB data files are synchronized.

For this option to provide a greater degree of safety, the MySQL server
should also be configured to synchronize the binary log and the
`InnoDB' logs to disk at every transaction.  The `InnoDB' logs are
synchronized by default, and `sync_binlog=1' can be used to synchronize
the binary log. The effect of this option is that at restart after a
crash, after doing a rollback of transactions, the MySQL server cuts
rolled back `InnoDB' transactions from the binary log. This ensures
that the binary log reflects the exact data of `InnoDB' tables, and so,
that the slave remains in synchrony with the master (not receiving a
statement which has been rolled back).

If the MySQL server discovers at crash recovery that the binary log is
shorter than it should have been, it lacks at least one successfully
committed `InnoDB' transaction. This should not happen if
`sync_binlog=1' and the disk/file system do an actual sync when they
are requested to (some do not), so the server prints an error message
`The binary log FILE_NAME is shorter than its expected size'. In this
case, this binary log is not correct and replication should be
restarted from a fresh snapshot of the master's data.

The session values of the following system variables are written to the
binary log and honored by the replication slave when parsing the binary
log:

   * `sql_mode' (except that the `NO_DIR_IN_CREATE' mode is not
     replicated; see *Note replication-features-variables::)

   * `foreign_key_checks'

   * `unique_checks'

   * `character_set_client'

   * `collation_connection'

   * `collation_database'

   * `collation_server'

   * `sql_auto_is_null'


File: manual.info,  Node: binary-log-formats,  Next: binary-log-setting,  Prev: binary-log,  Up: binary-log

5.2.4.1 Binary Logging Formats
..............................

The server uses several logging formats to record information in the
binary log. The exact format employed depends on the version of MySQL
being used. There are three logging formats:

   * Replication capabilities in MySQL originally were based on
     propagation of SQL statements from master to slave. This is called
     _statement-based logging_. You can cause this format to be used by
     starting the server with `--binlog-format=STATEMENT'.

   * In _row-based logging_, the master writes events to the binary log
     that indicate how individual table rows are affected. You can
     cause the server to use row-based logging by starting it with
     `--binlog-format=ROW'.

   * A third option is also available: _mixed logging_. With mixed
     logging, statement-based logging is used by default, but the
     logging mode switches automatically to row-based in certain cases
     as described below. You can cause MySQL to use mixed logging
     explicitly by starting *Note `mysqld': mysqld. with the option
     `--binlog-format=MIXED'.

In MySQL 5.5, the default binary logging format is `STATEMENT'.

The logging format can also be set or limited by the storage engine
being used. This helps to eliminate issues when replicating certain
statements between a master and slave which are using different storage
engines.

With statement-based replication, there may be issues with replicating
nondeterministic statements. In deciding whether or not a given
statement is safe for statement-based replication, MySQL determines
whether it can guarantee that the statement can be replicated using
statement-based logging. If MySQL cannot make this guarantee, it marks
the statement as potentially unreliable and issues the warning,
`Statement may not be safe to log in statement format'.

You can avoid these issues by using MySQL's row-based replication
instead.


File: manual.info,  Node: binary-log-setting,  Next: binary-log-mixed,  Prev: binary-log-formats,  Up: binary-log

5.2.4.2 Setting The Binary Log Format
.....................................

You can select the binary logging format explicitly by starting the
MySQL server with `--binlog-format=TYPE'.  The supported values for
TYPE are:

   * `STATEMENT' causes logging to be statement based.

   * `ROW' causes logging to be row based.

   * `MIXED' causes logging to use mixed format.

In MySQL 5.5, the default binary logging format is `STATEMENT'. This
includes MySQL Cluster NDB 7.2.1 and later MySQL Cluster NDB 7.2
releases, which are based on MySQL 5.5.

The logging format also can be switched at runtime. To specify the
format globally for all clients, set the global value of the
`binlog_format' system variable:

     mysql> SET GLOBAL binlog_format = 'STATEMENT';
     mysql> SET GLOBAL binlog_format = 'ROW';
     mysql> SET GLOBAL binlog_format = 'MIXED';

An individual client can control the logging format for its own
statements by setting the session value of `binlog_format':

     mysql> SET SESSION binlog_format = 'STATEMENT';
     mysql> SET SESSION binlog_format = 'ROW';
     mysql> SET SESSION binlog_format = 'MIXED';

*Note*:

Each MySQL Server can set its own and only its own binary logging
format (true whether `binlog_format' is set with global or session
scope). This means that changing the logging format on a replication
master does not cause a slave to change its logging format to match.
(When using `STATEMENT' mode, the `binlog_format' system variable is
not replicated; when using `MIXED' or `ROW' logging mode, it is
replicated but is ignored by the slave.) Changing the binary logging
format on the master while replication is ongoing, or without also
changing it on the slave can thus cause unexpected results, or even
cause replication to fail altogether.

To change the global or session `binlog_format' value, you must have
the `SUPER' privilege.

In addition to switching the logging format manually, a slave server
may switch the format _automatically_.  This happens when the server is
running in either `STATEMENT' or `MIXED' format and encounters an event
in the binary log that is written in `ROW' logging format. In that
case, the slave switches to row-based replication temporarily for that
event, and switches back to the previous format afterward.

There are several reasons why a client might want to set binary logging
on a per-session basis:

   * A session that makes many small changes to the database might want
     to use row-based logging.

   * A session that performs updates that match many rows in the
     `WHERE' clause might want to use statement-based logging because
     it will be more efficient to log a few statements than many rows.

   * Some statements require a lot of execution time on the master, but
     result in just a few rows being modified. It might therefore be
     beneficial to replicate them using row-based logging.

There are exceptions when you cannot switch the replication format at
runtime:

   * From within a stored function or a trigger

   * If the *Note `NDBCLUSTER': mysql-cluster. storage engine is enabled

   * If the session is currently in row-based replication mode and has
     open temporary tables

Trying to switch the format in any of these cases results in an error.

If you are using *Note `InnoDB': innodb-storage-engine. tables and the
transaction isolation level is `READ COMMITTED' or `READ UNCOMMITTED',
only row-based logging can be used. It is _possible_ to change the
logging format to `STATEMENT', but doing so at runtime leads very
rapidly to errors because `InnoDB' can no longer perform inserts.

Switching the replication format at runtime is not recommended when any
temporary tables exist, because temporary tables are logged only when
using statement-based replication, whereas with row-based replication
they are not logged. With mixed replication, temporary tables are
usually logged; exceptions happen with user-defined functions (UDFs)
and with the `UUID()' function.

With the binary log format set to `ROW', many changes are written to
the binary log using the row-based format. Some changes, however, still
use the statement-based format. Examples include all DDL (data
definition language) statements such as *Note `CREATE TABLE':
create-table, *Note `ALTER TABLE': alter-table, or *Note `DROP TABLE':
drop-table.

The `--binlog-row-event-max-size' option is available for servers that
are capable of row-based replication. Rows are stored into the binary
log in chunks having a size in bytes not exceeding the value of this
option.  The value must be a multiple of 256. The default value is 1024.

*Warning*:

When using _statement-based logging_ for replication, it is possible
for the data on the master and slave to become different if a statement
is designed in such a way that the data modification is
_nondeterministic_; that is, it is left to the will of the query
optimizer. In general, this is not a good practice even outside of
replication. For a detailed explanation of this issue, see *Note bugs::.


File: manual.info,  Node: binary-log-mixed,  Next: binary-log-mysql-database,  Prev: binary-log-setting,  Up: binary-log

5.2.4.3 Mixed Binary Logging Format
...................................

When running in `MIXED' logging format, the server automatically
switches from statement-based to row-based logging under the following
conditions:

   * When a DML statement updates an *Note `NDBCLUSTER': mysql-cluster.
     table.

   * When a function contains `UUID()'.

   * When one or more tables with `AUTO_INCREMENT' columns are updated
     and a trigger or stored function is invoked. Like all other unsafe
     statements, this generates a warning if `binlog_format =
     STATEMENT'.

     For more information, see *Note
     replication-features-auto-increment::.

   * When any *Note `INSERT DELAYED': insert-delayed. is executed.

   * When the body of a view requires row-based replication, the
     statement creating the view also uses it. For example, this occurs
     when the statement creating a view uses the `UUID()' function.

   * When a call to a UDF is involved.

   * If a statement is logged by row and the session that executed the
     statement has any temporary tables, logging by row is used for all
     subsequent statements (except for those accessing temporary
     tables) until all temporary tables in use by that session are
     dropped.

     This is true whether or not any temporary tables are actually
     logged.

     Temporary tables cannot be logged using row-based format; thus,
     once row-based logging is used, all subsequent statements using
     that table are unsafe. The server approximates this condition by
     treating all statements executed during the session as unsafe
     until the session no longer holds any temporary tables.

   * When `FOUND_ROWS()' or `ROW_COUNT()' is used. (Bug #12092, Bug
     #30244)

   * When `USER()', `CURRENT_USER()', or `CURRENT_USER' is used. (Bug
     #28086)

   * When a statement refers to one or more system variables.  (Bug
     #31168)

     Exception

     The following system variables, when used with session scope
     (only), do not cause the logging format to switch:

        * `auto_increment_increment'

        * `auto_increment_offset'

        * `character_set_client'

        * `character_set_connection'

        * `character_set_database'

        * `character_set_server'

        * `collation_connection'

        * `collation_database'

        * `collation_server'

        * `foreign_key_checks'

        * `identity'

        * `last_insert_id'

        * `lc_time_names'

        * `pseudo_thread_id'

        * `sql_auto_is_null'

        * `time_zone'

        * `timestamp'

        * `unique_checks'

     For information about determining system variable scope, see *Note
     using-system-variables::.

     For information about how replication treats `sql_mode', see *Note
     replication-features-variables::.

   * When one of the tables involved is a log table in the `mysql'
     database.

   * When the `LOAD_FILE()' function is used. (Bug #39701)

*Note*:

A warning is generated if you try to execute a statement using
statement-based logging that should be written using row-based logging.
The warning is shown both in the client (in the output of *Note `SHOW
WARNINGS': show-warnings.) and through the *Note `mysqld': mysqld.
error log. A warning is added to the *Note `SHOW WARNINGS':
show-warnings.  table each time such a statement is executed. However,
only the first statement that generated the warning for each client
session is written to the error log to prevent flooding the log.

In addition to the decisions above, individual engines can also
determine the logging format used when information in a table is
updated. The logging capabilities of an individual engine can be
defined as follows:

   * If an engine supports row-based logging, the engine is said to be
     _row-logging capable_.

   * If an engine supports statement-based logging, the engine is said
     to be _statement-logging capable_.

A given storage engine can support either or both logging formats. The
following table lists the formats supported by each engine.

This table lists the logging formats supported by each storage engine.

Storage Engine                       Row Logging        Statement Logging
                                     Supported          Supported
`ARCHIVE'                            Yes                Yes
`BLACKHOLE'                          Yes                Yes
`CSV'                                Yes                Yes
`EXAMPLE'                            Yes                No
`FEDERATED'                          Yes                Yes
`HEAP'                               Yes                Yes
`InnoDB'                             Yes                Yes when the
                                                        transaction
                                                        isolation level is
                                                        `REPEATABLE READ'
                                                        or
                                                        `SERIALIZABLE'; No
                                                        otherwise.
`MyISAM'                             Yes                Yes
`MERGE'                              Yes                Yes
*Note `NDBCLUSTER': mysql-cluster.   Yes                No

In MySQL 5.5.3 and later, whether a statement is to be logged and the
logging mode to be used is determined according to the type of
statement (safe, unsafe, or binary injected), the binary logging format
(`STATEMENT', `ROW', or `MIXED'), and the logging capabilities of the
storage engine (statement capable, row capable, both, or neither).
Statements may be logged with or without a warning; failed statements
are not logged, but generate errors in the log. This is shown in the
following decision table, where *SLC* stands for `statement-logging
capable' and *RLC* stands for `row-logging capable'.

The information in this table is used to determine if a statement is to
be logged and the logging mode to be used.  The table outlines
conditions (Safe/unsafe, `binlog_format', SLC, RLR) and corresponding
actions.

ConditionAction                                            
Type    `binlog_format'    SLC     RLC     Error /        Logged as
                                           Warning        
*       `*'                No      No      `Error:        `-'
                                           Cannot         
                                           execute        
                                           statement':    
                                           Binary logging 
                                           is impossible  
                                           since at       
                                           least one      
                                           engine is      
                                           involved that  
                                           is both        
                                           row-incapable  
                                           and            
                                           statement-incapable.
Safe    `STATEMENT'        Yes     No      -              `STATEMENT'
Safe    `MIXED'            Yes     No      -              `STATEMENT'
Safe    `ROW'              Yes     No      `Error:        `-'
                                           Cannot         
                                           execute        
                                           statement':    
                                           Binary logging 
                                           is impossible  
                                           since          
                                           `BINLOG_FORMAT 
                                           = ROW' and at  
                                           least one      
                                           table uses a   
                                           storage        
                                           engine that    
                                           is not         
                                           capable of     
                                           row-based      
                                           logging.       
Unsafe  `STATEMENT'        Yes     No      `Warning:      `STATEMENT'
                                           Unsafe         
                                           statement      
                                           binlogged in   
                                           statement      
                                           format',       
                                           since          
                                           `BINLOG_FORMAT 
                                           = STATEMENT'   
Unsafe  `MIXED'            Yes     No      `Error:        `-'
                                           Cannot         
                                           execute        
                                           statement':    
                                           Binary logging 
                                           of an unsafe   
                                           statement is   
                                           impossible     
                                           when the       
                                           storage        
                                           engine is      
                                           limited to     
                                           statement-based
                                           logging, even  
                                           if             
                                           `BINLOG_FORMAT 
                                           = MIXED'.      
Unsafe  `ROW'              Yes     No      `Error:        -
                                           Cannot         
                                           execute        
                                           statement':    
                                           Binary logging 
                                           is impossible  
                                           since          
                                           `BINLOG_FORMAT 
                                           = ROW' and at  
                                           least one      
                                           table uses a   
                                           storage        
                                           engine that    
                                           is not         
                                           capable of     
                                           row-based      
                                           logging.       
Row     `STATEMENT'        Yes     No      `Error:        -
Injection                                   Cannot         
                                           execute row    
                                           injection':    
                                           Binary         
                                           logging is     
                                           not possible   
                                           since at       
                                           least one      
                                           table uses a   
                                           storage        
                                           engine that    
                                           is not         
                                           capable of     
                                           row-based      
                                           logging.       
Row     `MIXED'            Yes     No      `Error:        -
Injection                                   Cannot         
                                           execute row    
                                           injection':    
                                           Binary         
                                           logging is     
                                           not possible   
                                           since at       
                                           least one      
                                           table uses a   
                                           storage        
                                           engine that    
                                           is not         
                                           capable of     
                                           row-based      
                                           logging.       
Row     `ROW'              Yes     No      `Error:        -
Injection                                   Cannot         
                                           execute row    
                                           injection':    
                                           Binary         
                                           logging is     
                                           not possible   
                                           since at       
                                           least one      
                                           table uses a   
                                           storage        
                                           engine that    
                                           is not         
                                           capable of     
                                           row-based      
                                           logging.       
Safe    `STATEMENT'        No      Yes     `Error:        `-'
                                           Cannot         
                                           execute        
                                           statement':    
                                           Binary logging 
                                           is impossible  
                                           since          
                                           `BINLOG_FORMAT 
                                           = STATEMENT'   
                                           and at least   
                                           one table      
                                           uses a         
                                           storage        
                                           engine that    
                                           is not         
                                           capable of     
                                           statement-based
                                           logging.       
Safe    `MIXED'            No      Yes     -              `ROW'
Safe    `ROW'              No      Yes     -              `ROW'
Unsafe  `STATEMENT'        No      Yes     `Error:        -
                                           Cannot         
                                           execute        
                                           statement':    
                                           Binary logging 
                                           is impossible  
                                           since          
                                           `BINLOG_FORMAT 
                                           = STATEMENT'   
                                           and at least   
                                           one table      
                                           uses a         
                                           storage        
                                           engine that    
                                           is not         
                                           capable of     
                                           statement-based
                                           logging.       
Unsafe  `MIXED'            No      Yes     -              `ROW'
Unsafe  `ROW'              No      Yes     -              `ROW'
Row     `STATEMENT'        No      Yes     `Error:        `-'
Injection                                   Cannot         
                                           execute row    
                                           injection':    
                                           Binary         
                                           logging is     
                                           not possible   
                                           since          
                                           `BINLOG_FORMAT 
                                           = STATEMENT'.  
Row     `MIXED'            No      Yes     -              `ROW'
Injection                                                  
Row     `ROW'              No      Yes     -              `ROW'
Injection                                                  
Safe    `STATEMENT'        Yes     Yes     -              `STATEMENT'
Safe    `MIXED'            Yes     Yes     -              `ROW'
Safe    `ROW'              Yes     Yes     -              `ROW'
Unsafe  `STATEMENT'        Yes     Yes     `Warning:      `STATEMENT'
                                           Unsafe         
                                           statement      
                                           binlogged in   
                                           statement      
                                           format' since  
                                           `BINLOG_FORMAT 
                                           = STATEMENT'.  
Unsafe  `MIXED'            Yes     Yes     -              `ROW'
Unsafe  `ROW'              Yes     Yes     -              `ROW'
Row     `STATEMENT'        Yes     Yes     `Error:        -
Injection                                   Cannot         
                                           execute row    
                                           injection':    
                                           Binary         
                                           logging is     
                                           not possible   
                                           because        
                                           `BINLOG_FORMAT 
                                           = STATEMENT'.  
Row     `MIXED'            Yes     Yes     -              `ROW'
Injection                                                  
Row     `ROW'              Yes     Yes     -              `ROW'
Injection                                                  

Handling of mixed-format logging in MySQL 5.5.2 and earlier

The decision-making process for binary logging changed in MySQL 5.5.3,
due to the fix for Bug #39934. Prior to MySQL 5.5.3, when determining
the logging mode to be used, the capabilities of all the tables
affected by the event are combined, and the set of affected tables is
then marked according to these rules:

   * A set of tables is defined as _row-logging restricted_ if the
     tables are row-logging capable but not statement-logging capable.

   * A set of tables is defined as _statement-logging restricted_ if
     the tables are statement-logging capable but not row-logging
     capable.

Once the determination of the possible logging formats required by the
statement is complete it is compared to the current `binlog_format'
setting. The following table is used in MySQL 5.5.2 and earlier to
decide how the information is recorded in the binary log or, if
appropriate, whether an error is raised. In the table, a safe operation
is defined as one that is deterministic.

In MySQL 5.5.2 and earlier, several rules decide whether the statement
is deterministic, as shown in the following table, where *SLR* stands
for `statement-logging restricted' and *RLR* stands for `row-logging
restricted'. A statement is _statement-logging restricted_ if one or
more of the tables it accesses is not row-logging capable.  Similarly,
a statement is _row-logging restricted_ if any table accessed by the
statement is not statement-logging capable.

For MySQL 5.5.2 or earlier, the information in the this table is used
to decide if a statement is deterministic.  The table outlines
conditions (Safe/unsafe, `binlog_format', SLR, RLR) and corresponding
actions.

ConditionAction                                            
Safe/unsafe`binlog_format'    SLR     RLR     Error/Warning  Logged as
Safe    `STATEMENT'        Yes     Yes     `Error: not    
                                           loggable'      
Safe    `STATEMENT'        Yes     No                     `STATEMENT'
Safe    `STATEMENT'        No      Yes     `Error: not    
                                           loggable'      
Safe    `STATEMENT'        No      No                     `STATEMENT'
Safe    `MIXED'            Yes     Yes     `Error: not    
                                           loggable'      
Safe    `MIXED'            Yes     No                     `STATEMENT'
Safe    `MIXED'            No      Yes                    `ROW'
Safe    `MIXED'            No      No                     `STATEMENT'
Safe    `ROW'              Yes     Yes     `Error: not    
                                           loggable'      
Safe    `ROW'              Yes     No      `Error: not    
                                           loggable'      
Safe    `ROW'              No      Yes                    `ROW'
Safe    `ROW'              No      No                     `ROW'
Unsafe  `STATEMENT'        Yes     Yes     `Error: not    
                                           loggable'      
Unsafe  `STATEMENT'        Yes     No      `Warning:      `STATEMENT'
                                           unsafe'        
Unsafe  `STATEMENT'        No      Yes     `Error: not    
                                           loggable'      
Unsafe  `STATEMENT'        No      No      `Warning:      `STATEMENT'
                                           unsafe'        
Unsafe  `MIXED'            Yes     Yes     `Error: not    
                                           loggable'      
Unsafe  `MIXED'            Yes     No      `Error: not    
                                           loggable'      
Unsafe  `MIXED'            No      Yes                    `ROW'
Unsafe  `MIXED'            No      No                     `ROW'
Unsafe  `ROW'              Yes     Yes     `Error: not    
                                           loggable'      
Unsafe  `ROW'              Yes     No      `Error: not    
                                           loggable'      
Unsafe  `ROW'              No      Yes                    `ROW'
Unsafe  `ROW'              No      No                     `ROW'

In all MySQL 5.5 releases, when a warning is produced by the
determination, a standard MySQL warning is produced (and is available
using *Note `SHOW WARNINGS': show-warnings.).  The information is also
written to the *Note `mysqld': mysqld.  error log. Only one error for
each error instance per client connection is logged to prevent flooding
the log. The log message includes the SQL statement that was attempted.

If a slave server was started with `--log-warnings' enabled, the slave
prints messages to the error log to provide information about its
status, such as the binary log and relay log coordinates where it
starts its job, when it is switching to another relay log, when it
reconnects after a disconnect, and so forth.


File: manual.info,  Node: binary-log-mysql-database,  Prev: binary-log-mixed,  Up: binary-log

5.2.4.4 Logging Format for Changes to `mysql' Database Tables
.............................................................

The contents of the grant tables in the `mysql' database can be
modified directly (for example, with *Note `INSERT': insert. or *Note
`DELETE': delete.) or indirectly (for example, with *Note `GRANT':
grant. or *Note `CREATE USER': create-user.). Statements that affect
`mysql' database tables are written to the binary log using the
following rules:

   * Data manipulation statements that change data in `mysql' database
     tables directly are logged according to the setting of the
     `binlog_format' system variable. This pertains to statements such
     as *Note `INSERT': insert, *Note `UPDATE': update, *Note `DELETE':
     delete, *Note `REPLACE': replace, *Note `DO': do, *Note `LOAD DATA
     INFILE': load-data, *Note `SELECT': select, and *Note `TRUNCATE
     TABLE': truncate-table.

   * Statements that change the `mysql' database indirectly are logged
     as statements regardless of the value of `binlog_format'. This
     pertains to statements such as *Note `GRANT': grant, *Note
     `REVOKE': revoke, *Note `SET PASSWORD': set-password, *Note
     `RENAME USER': rename-user, `CREATE' (all forms except *Note
     `CREATE TABLE ... SELECT': create-table.), `ALTER' (all forms),
     and `DROP' (all forms).

*Note `CREATE TABLE ... SELECT': create-table. is a combination of data
definition and data manipulation. The *Note `CREATE TABLE':
create-table.  part is logged using statement format and the *Note
`SELECT': select. part is logged according to the value of
`binlog_format'.


File: manual.info,  Node: slow-query-log,  Next: log-file-maintenance,  Prev: binary-log,  Up: server-logs

5.2.5 The Slow Query Log
------------------------

The slow query log consists of SQL statements that took more than
`long_query_time' seconds to execute and required at least
`min_examined_row_limit' rows to be examined. The minimum and default
values of `long_query_time' are 0 and 10, respectively. The value can
be specified to a resolution of microseconds. For logging to a file,
times are written including the microseconds part. For logging to
tables, only integer times are written; the microseconds part is
ignored.

By default, administrative statements are not logged, nor are queries
that do not use indexes for lookups. This behavior can be changed using
`--log-slow-admin-statements' and `log_queries_not_using_indexes', as
described later.

The time to acquire the initial locks is not counted as execution time.
*Note `mysqld': mysqld. writes a statement to the slow query log after
it has been executed and after all locks have been released, so log
order might differ from execution order.

By default, the slow query log is disabled. To specify the initial slow
query log state explicitly, use `--slow_query_log[={0|1}]'. With no
argument or an argument of 1, `--slow_query_log' enables the log.  With
an argument of 0, this option disables the log. To specify a log file
name, use `--slow_query_log_file=FILE_NAME'.  To specify the log
destination, use `--log-output' (as described in *Note
log-destinations::). The older option to enable the slow query log file,
`--log-slow-queries', is deprecated.

If you specify no name for the slow query log file, the default name is
`HOST_NAME-slow.log'.  The server creates the file in the data
directory unless an absolute path name is given to specify a different
directory.

To disable or enable the slow query log or change the log file name at
runtime, use the global `slow_query_log' and `slow_query_log_file'
system variables. Set `slow_query_log' to 0 (or `OFF') to disable the
log or to 1 (or `ON') to enable it. Set `slow_query_log_file' to specify
the name of the log file. If a log file already is open, it is closed
and the new file is opened.

When the slow query log is enabled, the server writes output to any
destinations specified by the `--log-output' option or `log_output'
system variable. If you enable the log, the server opens the log file
and writes startup messages to it. However, further logging of queries
to the file does not occur unless the `FILE' log destination is
selected. If the destination is `NONE', the server writes no queries
even if the slow query log is enabled. Setting the log file name has no
effect on logging if the log destination value does not contain `FILE'.

The server writes less information to the slow query log (and binary
log) if you use the `--log-short-format' option.

To include slow administrative statements in the statements written to
the slow query log, use the `--log-slow-admin-statements' server
option. Administrative statements include *Note `ALTER TABLE':
alter-table, *Note `ANALYZE TABLE': analyze-table, *Note `CHECK TABLE':
check-table, *Note `CREATE INDEX': create-index, *Note `DROP INDEX':
drop-index, *Note `OPTIMIZE TABLE': optimize-table, and *Note `REPAIR
TABLE': repair-table.

To include queries that do not use indexes for row lookups in the
statements written to the slow query log, enable the
`log_queries_not_using_indexes' system variable. When such queries are
logged, the slow query log may grow quickly.

The server uses the controlling parameters in the following order to
determine whether to write a query to the slow query log:

  1. The query must either not be an administrative statement, or
     `--log-slow-admin-statements' must have been specified.

  2. The query must have taken at least `long_query_time' seconds, or
     `log_queries_not_using_indexes' must be enabled and the query used
     no indexes for row lookups.

  3. The query must have examined at least `min_examined_row_limit'
     rows.

The server does not write queries handled by the query cache to the
slow query log, nor queries that would not benefit from the presence of
an index because the table has zero rows or one row.

By default, a replication slave does not write replicated queries to
the slow query log. To change this, use the
`--log-slow-slave-statements' server option.

The slow query log should be protected because logged statements might
contain passwords. See *Note password-logging::.

The slow query log can be used to find queries that take a long time to
execute and are therefore candidates for optimization.  However,
examining a long slow query log can become a difficult task. To make
this easier, you can process a slow query log file using the *Note
`mysqldumpslow': mysqldumpslow. command to summarize the queries that
appear in the log. See *Note mysqldumpslow::.


File: manual.info,  Node: log-file-maintenance,  Prev: slow-query-log,  Up: server-logs

5.2.6 Server Log Maintenance
----------------------------

As described in *Note server-logs::, MySQL Server can create several
different log files to help you see what activity is taking place.
However, you must clean up these files regularly to ensure that the
logs do not take up too much disk space.

When using MySQL with logging enabled, you may want to back up and
remove old log files from time to time and tell MySQL to start logging
to new files. See *Note backup-methods::.

On a Linux (Red Hat) installation, you can use the `mysql-log-rotate'
script for this. If you installed MySQL from an RPM distribution, this
script should have been installed automatically. Be careful with this
script if you are using the binary log for replication. You should not
remove binary logs until you are certain that their contents have been
processed by all slaves.

On other systems, you must install a short script yourself that you
start from `cron' (or its equivalent) for handling log files.

For the binary log, you can set the `expire_logs_days' system variable
to expire binary log files automatically after a given number of days
(see *Note server-system-variables::). If you are using replication,
you should set the variable no lower than the maximum number of days
your slaves might lag behind the master. To remove binary logs on
demand, use the *Note `PURGE BINARY LOGS': purge-binary-logs. statement
(see *Note purge-binary-logs::).

You can force MySQL to start using new log files by flushing the logs.
Log flushing occurs when you issue a *Note `FLUSH LOGS': flush.
statement or execute a *Note `mysqladmin flush-logs': mysqladmin, *Note
`mysqladmin refresh': mysqladmin, *Note `mysqldump --flush-logs':
mysqldump, or *Note `mysqldump --master-data': mysqldump. command. See
*Note flush::, *Note mysqladmin::, and *Note mysqldump::. In addition,
the binary log is flushed when its size reaches the value of the
`max_binlog_size' system variable.

As of MySQL 5.5.3, *Note `FLUSH LOGS': flush. supports optional
modifiers to enable selective flushing of individual logs (for example,
*Note `FLUSH BINARY LOGS': flush.).

A log-flushing operation does the following:

   * If general query logging or slow query logging to a log file is
     enabled, the server closes and reopens the general query log file
     or slow query log file.

   * If binary logging is enabled, the server closes the current binary
     log file and opens a new log file with the next sequence number.

   * If the server was started with the `--log-error' option to cause
     the error log to be written to a file, the result of a
     log-flushing operation is version dependent:

        * As of MySQL 5.5.7, the server closes and reopens the log file.

        * Prior to MySQL 5.5.7, the server renames the current log file
          with the suffix `-old', then creates a new empty log file.

The server creates a new binary log file when you flush the logs.
However, it just closes and reopens the general and slow query log
files. To cause new files to be created on Unix, rename the current log
files before flushing them. At flush time, the server opens new log
files with the original names. For example, if the general and slow
query log files are named `mysql.log' and `mysql-slow.log', you can use
a series of commands like this:

     shell> cd MYSQL-DATA-DIRECTORY
     shell> mv mysql.log mysql.old
     shell> mv mysql-slow.log mysql-slow.old
     shell> mysqladmin flush-logs

On Windows, use `rename' rather than `mv'.

At this point, you can make a backup of `mysql.old' and
`mysql-slow.old' and then remove them from disk.

A similar strategy can be used to back up the error log file, if there
is one, except that, on Windows, you cannot rename the error log file
while the server has it open before MySQL 5.5.7. To rename the error
log file, a stop and restart can be avoided by flushing the logs to
cause the server to rename the current log file with the suffix `-old'
and create a new empty error log file. For further information, see
*Note error-log::.

You can rename the general query log or slow query log at runtime by
disabling the log:

     SET GLOBAL general_log = 'OFF';
     SET GLOBAL slow_query_log = 'OFF';

With the logs disabled, rename the log files externally; for example,
from the command line. Then enable the logs again:

     SET GLOBAL general_log = 'ON';
     SET GLOBAL slow_query_log = 'ON';

This method works on any platform and does not require a server restart.


File: manual.info,  Node: multiple-servers,  Next: dba-dtrace-server,  Prev: server-logs,  Up: server-administration

5.3 Running Multiple MySQL Instances on One Machine
===================================================

* Menu:

* multiple-data-directories::    Setting Up Multiple Data Directories
* multiple-windows-servers::     Running Multiple MySQL Instances on Windows
* multiple-unix-servers::        Running Multiple MySQL Instances on Unix
* multiple-server-clients::      Using Client Programs in a Multiple-Server Environment

In some cases, you might want to run multiple instances of MySQL on a
single machine. You might want to test a new MySQL release while
leaving an existing production setup undisturbed. Or you might want to
give different users access to different *Note `mysqld': mysqld.
servers that they manage themselves. (For example, you might be an
Internet Service Provider that wants to provide independent MySQL
installations for different customers.)

It is possible to use a different MySQL server binary per instance, or
use the same binary for multiple instances, or any combination of the
two approaches. For example, you might run a server from MySQL 5.1 and
one from MySQL 5.5, to see how different versions handle a given
workload. Or you might run multiple instances of the current production
version, each managing a different set of databases.

Whether or not you use distinct server binaries, each instance that you
run must be configured with unique values for several operating
parameters. This eliminates the potential for conflict between
instances. Parameters can be set on the command line, in option files,
or by setting environment variables. See *Note program-options::. To
see the values used by a given instance, connect to it and execute a
*Note `SHOW VARIABLES': show-variables. statement.

The primary resource managed by a MySQL instance is the data directory.
Each instance should use a different data directory, the location of
which is specified using the `--datadir=PATH' option. For methods of
configuring each instance with its own data directory, and warnings
about the dangers of failing to do so, see *Note
multiple-data-directories::.

In addition to using different data directories, several other options
must have different values for each server instance:

   * `--port=PORT_NUM'

     `--port' controls the port number for TCP/IP connections.
     Alternatively, if the host has multiple network addresses, you can
     use `--bind-address' to cause each server to listen to a different
     address.

   * `--socket=PATH'

     `--socket' controls the Unix socket file path on Unix or the named
     pipe name on Windows. On Windows, it is necessary to specify
     distinct pipe names only for those servers configured to permit
     named-pipe connections.

   * `--shared-memory-base-name=NAME'

     This option is used only on Windows. It designates the
     shared-memory name used by a Windows server to permit clients to
     connect using shared memory. It is necessary to specify distinct
     shared-memory names only for those servers configured to permit
     shared-memory connections.

   * `--pid-file=FILE_NAME'

     This option indicates the path name of the file in which the
     server writes its process ID.

If you use the following log file options, their values must differ for
each server:

   * `--general_log_file=FILE_NAME'

   * `--log-bin[=FILE_NAME]'

   * `--slow_query_log_file=FILE_NAME'

   * `--log-error[=FILE_NAME]'

For further discussion of log file options, see *Note server-logs::.

To achieve better performance, you can specify the following option
differently for each server, to spread the load between several
physical disks:

   * `--tmpdir=PATH'

Having different temporary directories also makes it easier to
determine which MySQL server created any given temporary file.

If you have multiple MySQL installations in different locations, you
can specify the base directory for each installation with the
`--basedir=PATH' option. This causes each instance to automatically use
a different data directory, log files, and PID file because the default
for each of those parameters is relative to the base directory. In that
case, the only other options you need to specify are the `--socket' and
`--port' options. Suppose that you install different versions of MySQL
using `tar' file binary distributions. These install in different
locations, so you can start the server for each installation using the
command `bin/mysqld_safe' under its corresponding base directory. *Note
`mysqld_safe': mysqld-safe. determines the proper `--basedir' option to
pass to *Note `mysqld': mysqld, and you need specify only the
`--socket' and `--port' options to *Note `mysqld_safe': mysqld-safe.

As discussed in the following sections, it is possible to start
additional servers by specifying appropriate command options or by
setting environment variables. However, if you need to run multiple
servers on a more permanent basis, it is more convenient to use option
files to specify for each server those option values that must be
unique to it. The `--defaults-file' option is useful for this purpose.


File: manual.info,  Node: multiple-data-directories,  Next: multiple-windows-servers,  Prev: multiple-servers,  Up: multiple-servers

5.3.1 Setting Up Multiple Data Directories
------------------------------------------

Each MySQL Instance on a machine should have its own data directory.
The location is specified using the `--datadir=PATH' option.

There are different methods of setting up a data directory for a new
instance:

   * Create a new data directory.

   * Copy an existing data directory.

The following discussion provides more detail about each method.

*Warning*:

Normally, you should never have two servers that update data in the
same databases. This may lead to unpleasant surprises if your operating
system does not support fault-free system locking. If (despite this
warning) you run multiple servers using the same data directory and
they have logging enabled, you must use the appropriate options to
specify log file names that are unique to each server. Otherwise, the
servers try to log to the same files.

Even when the preceding precautions are observed, this kind of setup
works only with `MyISAM' and `MERGE' tables, and not with any of the
other storage engines. Also, this warning against sharing a data
directory among servers always applies in an NFS environment.
Permitting multiple MySQL servers to access a common data directory
over NFS is a _very bad idea_. The primary problem is that NFS is the
speed bottleneck. It is not meant for such use. Another risk with NFS
is that you must devise a way to ensure that two or more servers do not
interfere with each other. Usually NFS file locking is handled by the
`lockd' daemon, but at the moment there is no platform that performs
locking 100% reliably in every situation.

* Create a New Data Directory *

With this method, the data directory will be in the same state as when
you first install MySQL. It will have the default set of MySQL accounts
and no user data.

On Unix, initialize the data directory by running *Note
`mysql_install_db': mysql-install-db. See *Note unix-postinstallation::.

On Windows, the data directory is included in the MySQL distribution:

   * MySQL Zip archive distributions for Windows contain an unmodified
     data directory. You can unpack such a distribution into a
     temporary location, then copy it `data' directory to where you are
     setting up the new instance.

   * As of MySQL 5.5.5, Windows MSI package installers create and set
     up the data directory that the installed server will use, but also
     create a pristine `template' data directory named `data' under the
     installation directory. After an installation has been performed
     using an MSI package, the template data directory can be copied to
     set up additional MySQL instances.

* Copy an Existing Data Directory *

With this method, any MySQL accounts or user data present in the data
directory are carried over to the new data directory.

  1. Stop the existing MySQL instance using the data directory.  This
     must be a clean shutdown so that the instance flushes any pending
     changes to disk.

  2. Copy the data directory to the location where the new data
     directory should be.

  3. Copy the `my.cnf' or `my.ini' option file used by the existing
     instance. This serves as a basis for the new instance.

  4. Modify the new option file so that any pathnames referring to the
     original data directory refer to the new data directory.  Also,
     modify any other options that must be unique per instance, such as
     the TCP/IP port number and the log files.  For a list of
     parameters that must be unique per instance, see *Note
     multiple-servers::.

  5. Start the new instance, telling it to use the new option file.


File: manual.info,  Node: multiple-windows-servers,  Next: multiple-unix-servers,  Prev: multiple-data-directories,  Up: multiple-servers

5.3.2 Running Multiple MySQL Instances on Windows
-------------------------------------------------

* Menu:

* multiple-windows-command-line-servers::  Starting Multiple MySQL Instances at the Windows Command Line
* multiple-windows-services::    Starting Multiple MySQL Instances as Windows Services

You can run multiple servers on Windows by starting them manually from
the command line, each with appropriate operating parameters, or by
installing several servers as Windows services and running them that
way. General instructions for running MySQL from the command line or as
a service are given in *Note windows-installation::. The following
sections describe how to start each server with different values for
those options that must be unique per server, such as the data
directory. These options are listed in *Note multiple-servers::.


File: manual.info,  Node: multiple-windows-command-line-servers,  Next: multiple-windows-services,  Prev: multiple-windows-servers,  Up: multiple-windows-servers

5.3.2.1 Starting Multiple MySQL Instances at the Windows Command Line
.....................................................................

The procedure for starting a single MySQL server manually from the
command line is described in *Note windows-start-command-line::. To
start multiple servers this way, you can specify the appropriate
options on the command line or in an option file. It is more convenient
to place the options in an option file, but it is necessary to make
sure that each server gets its own set of options. To do this, create
an option file for each server and tell the server the file name with a
`--defaults-file' option when you run it.

Suppose that you want to run *Note `mysqld': mysqld. on port 3307 with
a data directory of `C:\mydata1', and *Note `mysqld-debug': mysqld. on
port 3308 with a data directory of `C:\mydata2'. Use this procedure:

  1. Make sure that each data directory exists, including its own copy
     of the `mysql' database that contains the grant tables.

  2. Create two option files. For example, create one file named
     `C:\my-opts1.cnf' that looks like this:

          [mysqld]
          datadir = C:/mydata1
          port = 3307

     Create a second file named `C:\my-opts2.cnf' that looks like this:

          [mysqld]
          datadir = C:/mydata2
          port = 3308

  3. Use the `--defaults-file' option to start each server with its own
     option file:

          C:\> C:\mysql\bin\mysqld --defaults-file=C:\my-opts1.cnf
          C:\> C:\mysql\bin\mysqld-debug --defaults-file=C:\my-opts2.cnf

     Each server starts in the foreground (no new prompt appears until
     the server exits later), so you will need to issue those two
     commands in separate console windows.

To shut down the servers, connect to each using the appropriate port
number:

     C:\> C:\mysql\bin\mysqladmin --port=3307 shutdown
     C:\> C:\mysql\bin\mysqladmin --port=3308 shutdown

Servers configured as just described permit clients to connect over
TCP/IP. If your version of Windows supports named pipes and you also
want to permit named-pipe connections, use the *Note `mysqld': mysqld.
or *Note `mysqld-debug': mysqld.  server and specify options that
enable the named pipe and specify its name. Each server that supports
named-pipe connections must use a unique pipe name. For example, the
`C:\my-opts1.cnf' file might be written like this:

     [mysqld]
     datadir = C:/mydata1
     port = 3307
     enable-named-pipe
     socket = mypipe1

Modify `C:\my-opts2.cnf' similarly for use by the second server. Then
start the servers as described previously.

A similar procedure applies for servers that you want to permit
shared-memory connections. Enable such connections with the
`--shared-memory' option and specify a unique shared-memory name for
each server with the `--shared-memory-base-name' option.


File: manual.info,  Node: multiple-windows-services,  Prev: multiple-windows-command-line-servers,  Up: multiple-windows-servers

5.3.2.2 Starting Multiple MySQL Instances as Windows Services
.............................................................

On Windows, a MySQL server can run as a Windows service. The procedures
for installing, controlling, and removing a single MySQL service are
described in *Note windows-start-service::.

To set up multiple MySQL services, you must make sure that each
instance uses a different service name in addition to the other
parameters that must be unique per instance.

For the following instructions, suppose that you want to run the *Note
`mysqld': mysqld. server from two different versions of MySQL that are
installed at `C:\mysql-5.1.55' and `C:\mysql-5.5.35', respectively.
(This might be the case if you are running 5.1.55 as your production
server, but also want to conduct tests using 5.5.35.)

To install MySQL as a Windows service, use the `--install' or
`--install-manual' option. For information about these options, see
*Note windows-start-service::.

Based on the preceding information, you have several ways to set up
multiple services. The following instructions describe some examples.
Before trying any of them, shut down and remove any existing MySQL
services.

   * *Approach 1:* Specify the options for all services in one of the
     standard option files. To do this, use a different service name
     for each server. Suppose that you want to run the 5.1.55 *Note
     `mysqld': mysqld. using the service name of `mysqld1' and the
     5.5.35 *Note `mysqld': mysqld. using the service name `mysqld2'.
     In this case, you can use the `[mysqld1]' group for 5.1.55 and the
     `[mysqld2]' group for 5.5.35.  For example, you can set up
     `C:\my.cnf' like this:

          # options for mysqld1 service
          [mysqld1]
          basedir = C:/mysql-5.1.55
          port = 3307
          enable-named-pipe
          socket = mypipe1

          # options for mysqld2 service
          [mysqld2]
          basedir = C:/mysql-5.5.35
          port = 3308
          enable-named-pipe
          socket = mypipe2

     Install the services as follows, using the full server path names
     to ensure that Windows registers the correct executable program
     for each service:

          C:\> C:\mysql-5.1.55\bin\mysqld --install mysqld1
          C:\> C:\mysql-5.5.35\bin\mysqld --install mysqld2

     To start the services, use the services manager, or use `NET
     START' with the appropriate service names:

          C:\> NET START mysqld1
          C:\> NET START mysqld2

     To stop the services, use the services manager, or use `NET STOP'
     with the appropriate service names:

          C:\> NET STOP mysqld1
          C:\> NET STOP mysqld2

   * *Approach 2:* Specify options for each server in separate files
     and use `--defaults-file' when you install the services to tell
     each server what file to use.  In this case, each file should list
     options using a `[mysqld]' group.

     With this approach, to specify options for the 5.1.55 *Note
     `mysqld': mysqld, create a file `C:\my-opts1.cnf' that looks like
     this:

          [mysqld]
          basedir = C:/mysql-5.1.55
          port = 3307
          enable-named-pipe
          socket = mypipe1

     For the 5.5.35 *Note `mysqld': mysqld, create a file
     `C:\my-opts2.cnf' that looks like this:

          [mysqld]
          basedir = C:/mysql-5.5.35
          port = 3308
          enable-named-pipe
          socket = mypipe2

     Install the services as follows (enter each command on a single
     line):

          C:\> C:\mysql-5.1.55\bin\mysqld --install mysqld1
                     --defaults-file=C:\my-opts1.cnf
          C:\> C:\mysql-5.5.35\bin\mysqld --install mysqld2
                     --defaults-file=C:\my-opts2.cnf

     When you install a MySQL server as a service and use a
     `--defaults-file' option, the service name must precede the option.

     After installing the services, start and stop them the same way as
     in the preceding example.

To remove multiple services, use *Note `mysqld --remove': mysqld. for
each one, specifying a service name following the `--remove' option. If
the service name is the default (`MySQL'), you can omit it.


File: manual.info,  Node: multiple-unix-servers,  Next: multiple-server-clients,  Prev: multiple-windows-servers,  Up: multiple-servers

5.3.3 Running Multiple MySQL Instances on Unix
----------------------------------------------

One way is to run multiple MySQL instances on Unix is to compile
different servers with different default TCP/IP ports and Unix socket
files so that each one listens on different network interfaces.
Compiling in different base directories for each installation also
results automatically in a separate, compiled-in data directory, log
file, and PID file location for each server.

Assume that an existing 5.1 server is configured for the default TCP/IP
port number (3306) and Unix socket file (`/tmp/mysql.sock'). To
configure a new 5.5.35 server to have different operating parameters,
use a `CMake' command something like this:

     shell> cmake . -DMYSQL_TCP_PORT=PORT_NUMBER \
                  -DMYSQL_UNIX_ADDR=FILE_NAME \
                  -DCMAKE_INSTALL_PREFIX=/usr/local/mysql-5.5.35

Here, PORT_NUMBER and FILE_NAME must be different from the default
TCP/IP port number and Unix socket file path name, and the
`CMAKE_INSTALL_PREFIX' value should specify an installation directory
different from the one under which the existing MySQL installation is
located.

If you have a MySQL server listening on a given port number, you can
use the following command to find out what operating parameters it is
using for several important configurable variables, including the base
directory and Unix socket file name:

     shell> mysqladmin --host=HOST_NAME --port=PORT_NUMBER variables

With the information displayed by that command, you can tell what
option values _not_ to use when configuring an additional server.

If you specify `localhost' as the host name, *Note `mysqladmin':
mysqladmin. defaults to using a Unix socket file connection rather than
TCP/IP. To explicitly specify the connection protocol, use the
`--protocol={TCP|SOCKET|PIPE|MEMORY}' option.

You need not compile a new MySQL server just to start with a different
Unix socket file and TCP/IP port number. It is also possible to use the
same server binary and start each invocation of it with different
parameter values at runtime. One way to do so is by using command-line
options:

     shell> mysqld_safe --socket=FILE_NAME --port=PORT_NUMBER

To start a second server, provide different `--socket' and `--port'
option values, and pass a `--datadir=PATH' option to *Note
`mysqld_safe': mysqld-safe. so that the server uses a different data
directory.

Alternatively, put the options for each server in a different option
file, then start each server using a `--defaults-file' option that
specifies the path to the appropriate option file. For example, if the
option files for two server instances are named
`/usr/local/mysql/my.cnf' and `/usr/local/mysql/my.cnf2', start the
servers like this: command:

     shell> mysqld_safe --defaults-file=/usr/local/mysql/my.cnf
     shell> mysqld_safe --defaults-file=/usr/local/mysql/my.cnf2

Another way to achieve a similar effect is to use environment variables
to set the Unix socket file name and TCP/IP port number:

     shell> MYSQL_UNIX_PORT=/tmp/mysqld-new.sock
     shell> MYSQL_TCP_PORT=3307
     shell> export MYSQL_UNIX_PORT MYSQL_TCP_PORT
     shell> mysql_install_db --user=mysql
     shell> mysqld_safe --datadir=/path/to/datadir &

This is a quick way of starting a second server to use for testing. The
nice thing about this method is that the environment variable settings
apply to any client programs that you invoke from the same shell. Thus,
connections for those clients are automatically directed to the second
server.

*Note environment-variables::, includes a list of other environment
variables you can use to affect MySQL programs.

On Unix, the *Note `mysqld_multi': mysqld-multi. script provides
another way to start multiple servers. See *Note mysqld-multi::.


File: manual.info,  Node: multiple-server-clients,  Prev: multiple-unix-servers,  Up: multiple-servers

5.3.4 Using Client Programs in a Multiple-Server Environment
------------------------------------------------------------

To connect with a client program to a MySQL server that is listening to
different network interfaces from those compiled into your client, you
can use one of the following methods:

   * Start the client with `--host=HOST_NAME' `--port=PORT_NUMBER' to
     connect using TCP/IP to a remote server, with `--host=127.0.0.1'
     `--port=PORT_NUMBER' to connect using TCP/IP to a local server, or
     with `--host=localhost' `--socket=FILE_NAME' to connect to a local
     server using a Unix socket file or a Windows named pipe.

   * Start the client with `--protocol=TCP' to connect using TCP/IP,
     `--protocol=SOCKET' to connect using a Unix socket file,
     `--protocol=PIPE' to connect using a named pipe, or
     `--protocol=MEMORY' to connect using shared memory. For TCP/IP
     connections, you may also need to specify `--host' and `--port'
     options. For the other types of connections, you may need to
     specify a `--socket' option to specify a Unix socket file or
     Windows named-pipe name, or a `--shared-memory-base-name' option
     to specify the shared-memory name. Shared-memory connections are
     supported only on Windows.

   * On Unix, set the `MYSQL_UNIX_PORT' and `MYSQL_TCP_PORT'
     environment variables to point to the Unix socket file and TCP/IP
     port number before you start your clients. If you normally use a
     specific socket file or port number, you can place commands to set
     these environment variables in your `.login' file so that they
     apply each time you log in. See *Note environment-variables::.

   * Specify the default Unix socket file and TCP/IP port number in the
     `[client]' group of an option file. For example, you can use
     `C:\my.cnf' on Windows, or the `.my.cnf' file in your home
     directory on Unix. See *Note option-files::.

   * In a C program, you can specify the socket file or port number
     arguments in the *Note `mysql_real_connect()': mysql-real-connect.
     call. You can also have the program read option files by calling
     *Note `mysql_options()': mysql-options. See *Note
     c-api-functions::.

   * If you are using the Perl `DBD::mysql' module, you can read
     options from MySQL option files. For example:

          $dsn = "DBI:mysql:test;mysql_read_default_group=client;"
                  . "mysql_read_default_file=/usr/local/mysql/data/my.cnf";
          $dbh = DBI->connect($dsn, $user, $password);

     See *Note apis-perl::.

     Other programming interfaces may provide similar capabilities for
     reading option files.


File: manual.info,  Node: dba-dtrace-server,  Prev: multiple-servers,  Up: server-administration

5.4 Tracing `mysqld' Using DTrace
=================================

* Menu:

* dba-dtrace-mysqld-ref::        `mysqld' DTrace Probe Reference

The DTrace probes in the MySQL server are designed to provide
information about the execution of queries within MySQL and the
different areas of the system being utilized during that process.  The
organization and triggering of the probes means that the execution of
an entire query can be monitored with one level of probes
(`query-start' and `query-done') but by monitoring other probes you can
get successively more detailed information about the execution of the
query in terms of the locks used, sort methods and even row-by-row and
storage-engine level execution information.

The DTrace probes are organized so that you can follow the entire query
process, from the point of connection from a client, through the query
execution, row-level operations, and back out again. You can think of
the probes as being fired within a specific sequence during a typical
client connect/execute/disconnect sequence, as shown in the following
figure.

FIGURE GOES HERE: The MySQL Architecture Using Pluggable Storage Engines

Global information is provided in the arguments to the DTrace probes at
various levels. Global information, that is, the connection ID and
user/host and where relevant the query string, is provided at key
levels (`connection-start', `command-start', `query-start', and
`query-exec-start'). As you go deeper into the probes, it is assumed
either you are only interested in the individual executions (row-level
probes provide information on the database and table name only), or
that you will combine the row-level probes with the notional parent
probes to provide the information about a specific query. Examples of
this will be given as the format and arguments of each probe are
provided.

For more information on DTrace and writing DTrace scripts, read the
DTrace User Guide (http://docs.oracle.com/cd/E19253-01/819-5488/).

MySQL 5.5 includes support for DTrace probes on Solaris 10 Update 5
(Solaris 5/08) on SPARC, x86 and x86_64 platforms.  Probes are also
supported on Mac OS X 10.4 and higher. Enabling the probes should be
automatic on these platforms. To explicitly enable or disable the
probes during building, use the `-DENABLE_DTRACE=1' or
`-DENABLE_DTRACE=0' option to `CMake'.


File: manual.info,  Node: dba-dtrace-mysqld-ref,  Prev: dba-dtrace-server,  Up: dba-dtrace-server

5.4.1 `mysqld' DTrace Probe Reference
-------------------------------------

* Menu:

* dba-dtrace-ref-connection::    Connection Probes
* dba-dtrace-ref-command::       Command Probes
* dba-dtrace-ref-query::         Query Probes
* dba-dtrace-ref-query-parsing::  Query Parsing Probes
* dba-dtrace-ref-querycache::    Query Cache Probes
* dba-dtrace-ref-queryexec::     Query Execution Probes
* dba-dtrace-ref-rowlevel::      Row-Level Probes
* dba-dtrace-ref-readrow::       Read Row Probes
* dba-dtrace-ref-index::         Index Probes
* dba-dtrace-ref-lock::          Lock Probes
* dba-dtrace-ref-filesort::      Filesort Probes
* dba-dtrace-ref-statement::     Statement Probes
* dba-dtrace-ref-network::       Network Probes
* dba-dtrace-ref-keycache::      Keycache Probes

MySQL supports the following static probes, organized into groups of
functionality.

*MySQL DTrace Probes*

Group          Probes
*Note          `connection-start', `connection-done'
Connection:    
dba-dtrace-ref-connection.
*Note          `command-start', `command-done'
Command:       
dba-dtrace-ref-command.
*Note Query:   `query-start', `query-done'
dba-dtrace-ref-query.
*Note Query    `query-parse-start', `query-parse-done'
Parsing:       
dba-dtrace-ref-query-parsing.
*Note Query    `query-cache-hit', `query-cache-miss'
Cache:         
dba-dtrace-ref-querycache.
*Note Query    `query-exec-start', `query-exec-done'
Execution:     
dba-dtrace-ref-queryexec.
*Note Row      `insert-row-start', `insert-row-done'
Level:         
dba-dtrace-ref-rowlevel.
               `update-row-start', `update-row-done'
               `delete-row-start', `delete-row-done'
*Note Row      `read-row-start', `read-row-done'
Reads:         
dba-dtrace-ref-readrow.
*Note Index    `index-read-row-start', `index-read-row-done'
Reads:         
dba-dtrace-ref-index.
*Note Lock:    `handler-rdlock-start', `handler-rdlock-done'
dba-dtrace-ref-lock.
               `handler-wrlock-start', `handler-wrlock-done'
               `handler-unlock-start', `handler-unlock-done'
*Note          `filesort-start', `filesort-done'
Filesort:      
dba-dtrace-ref-filesort.
*Note          `select-start', `select-done'
Statement:     
dba-dtrace-ref-statement.
               `insert-start', `insert-done'
               `insert-select-start', `insert-select-done'
               `update-start', `update-done'
               `multi-update-start', `multi-update-done'
               `delete-start', `delete-done'
               `multi-delete-start', `multi-delete-done'
*Note          `net-read-start', `net-read-done', `net-write-start',
Network:       `net-write-done'
dba-dtrace-ref-network.
*Note          `keycache-read-start', `keycache-read-block',
Keycache:      `keycache-read-done', `keycache-read-hit',
dba-dtrace-ref-keycache.`keycache-read-miss', `keycache-write-start',
               `keycache-write-block', `keycache-write-done'

*Note*:

When extracting the argument data from the probes, each argument is
available as `argN', starting with `arg0'. To identify each argument
within the definitions they are provided with a descriptive name, but
you must access the information using the corresponding `argN'
parameter.


File: manual.info,  Node: dba-dtrace-ref-connection,  Next: dba-dtrace-ref-command,  Prev: dba-dtrace-mysqld-ref,  Up: dba-dtrace-mysqld-ref

5.4.1.1 Connection Probes
.........................

The `connection-start' and `connection-done' probes enclose a connection
from a client, regardless of whether the connection is through a socket
or network connection.

     connection-start(connectionid, user, host)
     connection-done(status, connectionid)

   * `connection-start': Triggered after a connection and successful
     login/authentication have been completed by a client. The
     arguments contain the connection information:

        * `connectionid': An `unsigned long' containing the connection
          ID. This is the same as the process ID shown as the `Id'
          value in the output from *Note `SHOW PROCESSLIST':
          show-processlist.

        * `user': The username used when authenticating. The value will
          be blank for the anonymous user.

        * `host': The host of the client connection. For a connection
          made using UNIX sockets, the value will be blank.

   * `connection-done': Triggered just as the connection to the client
     has been closed. The arguments are:

        * `status': The status of the connection when it was closed. A
          logout operation will have a value of 0; any other
          termination of the connection has a nonzero value.

        * `connectionid': The connection ID of the connection that was
          closed.

The following D script will quantify and summarize the average duration
of individual connections, and provide a count, dumping the information
every 60 seconds:

     #!/usr/sbin/dtrace -s

     mysql*:::connection-start
     {
       self->start = timestamp;
     }

     mysql*:::connection-done
     /self->start/
     {
       @ = quantize(((timestamp - self->start)/1000000));
       self->start = 0;
     }

     tick-60s
     {
       printa(@);
     }

When executed on a server with a large number of clients you might see
output similar to this:

       1  57413                        :tick-60s

                value  ------------- Distribution ------------- count
                   -1 |                                         0
                    0 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 30011
                    1 |                                         59
                    2 |                                         5
                    4 |                                         20
                    8 |                                         29
                   16 |                                         18
                   32 |                                         27
                   64 |                                         30
                  128 |                                         11
                  256 |                                         10
                  512 |                                         1
                 1024 |                                         6
                 2048 |                                         8
                 4096 |                                         9
                 8192 |                                         8
                16384 |                                         2
                32768 |                                         1
                65536 |                                         1
               131072 |                                         0
               262144 |                                         1
               524288 |                                         0


File: manual.info,  Node: dba-dtrace-ref-command,  Next: dba-dtrace-ref-query,  Prev: dba-dtrace-ref-connection,  Up: dba-dtrace-mysqld-ref

5.4.1.2 Command Probes
......................

The command probes are executed before and after a client command is
executed, including any SQL statement that might be executed during
that period. Commands include operations such as the initialization of
the DB, use of the `COM_CHANGE_USER' operation (supported by the MySQL
protocol), and manipulation of prepared statements. Many of these
commands are used only by the MySQL client API from various connectors
such as PHP and Java.

     command-start(connectionid, command, user, host)
     command-done(status)

   * `command-start': Triggered when a command is submitted to the
     server.

        * `connectionid': The connection ID of the client executing the
          command.

        * `command': An integer representing the command that was
          executed. Possible values are shown in the following table.

          This table lists possible `command-start' `command' values
          and provides a name and description for each.

          Value  Name         Description
          00     COM_SLEEP    Internal thread state
          01     COM_QUIT     Close connection
          02     COM_INIT_DB  Select database (`USE ...')
          03     COM_QUERY    Execute a query
          04     COM_FIELD_LISTGet a list of fields
          05     COM_CREATE_DBCreate a database (deprecated)
          06     COM_DROP_DB  Drop a database (deprecated)
          07     COM_REFRESH  Refresh connection
          08     COM_SHUTDOWN Shutdown server
          09     COM_STATISTICSGet statistics
          10     COM_PROCESS_INFOGet processes (*Note `SHOW PROCESSLIST':
                              show-processlist.)
          11     COM_CONNECT  Initialize connection
          12     COM_PROCESS_KILLKill process
          13     COM_DEBUG    Get debug information
          14     COM_PING     Ping
          15     COM_TIME     Internal thread state
          16     COM_DELAYED_INSERTInternal thread state
          17     COM_CHANGE_USERChange user
          18     COM_BINLOG_DUMPUsed by a replication slave or *Note
                              `mysqlbinlog': mysqlbinlog. to initiate a
                              binary log read
          19     COM_TABLE_DUMPUsed by a replication slave to get the
                              master table information
          20     COM_CONNECT_OUTUsed by a replication slave to log a
                              connection to the server
          21     COM_REGISTER_SLAVEUsed by a replication slave during
                              registration
          22     COM_STMT_PREPAREPrepare a statement
          23     COM_STMT_EXECUTEExecute a statement
          24     COM_STMT_SEND_LONG_DATAUsed by a client when requesting extended
                              data
          25     COM_STMT_CLOSEClose a prepared statement
          26     COM_STMT_RESETReset a prepared statement
          27     COM_SET_OPTIONSet a server option
          28     COM_STMT_FETCHFetch a prepared statement

        * `user': The user executing the command.

        * `host': The client host.

   * `command-done': Triggered when the command execution completes.
     The `status' argument contains 0 if the command executed
     successfully, or 1 if the statement was terminated before normal
     completion.

The `command-start' and `command-done' probes are best used when
combined with the statement probes to get an idea of overall execution
time.


File: manual.info,  Node: dba-dtrace-ref-query,  Next: dba-dtrace-ref-query-parsing,  Prev: dba-dtrace-ref-command,  Up: dba-dtrace-mysqld-ref

5.4.1.3 Query Probes
....................

The `query-start' and `query-done' probes are triggered when a specific
query is received by the server and when the query has been completed
and the information has been successfully sent to the client.

     query-start(query, connectionid, database, user, host)
     query-done(status)

   * `query-start': Triggered after the query string has been received
     from the client. The arguments are:

        * `query': The full text of the submitted query.

        * `connectionid': The connection ID of the client that
          submitted the query. The connection ID equals the connection
          ID returned when the client first connects and the `Id' value
          in the output from *Note `SHOW PROCESSLIST': show-processlist.

        * `database': The database name on which the query is being
          executed.

        * `user': The username used to connect to the server.

        * `host': The hostname of the client.

   * `query-done': Triggered once the query has been executed and the
     information has been returned to the client. The probe includes a
     single argument, `status', which returns 0 when the query is
     successfully executed and 1 if there was an error.

You can get a simple report of the execution time for each query using
the following D script:

     #!/usr/sbin/dtrace -s

     #pragma D option quiet

     dtrace:::BEGIN
     {
        printf("%-20s %-20s %-40s %-9s\n", "Who", "Database", "Query", "Time(ms)");
     }

     mysql*:::query-start
     {
        self->query = copyinstr(arg0);
        self->connid = arg1;
        self->db    = copyinstr(arg2);
        self->who   = strjoin(copyinstr(arg3),strjoin("@",copyinstr(arg4)));
        self->querystart = timestamp;
     }

     mysql*:::query-done
     {
        printf("%-20s %-20s %-40s %-9d\n",self->who,self->db,self->query,
               (timestamp - self->querystart) / 1000000);
     }

When executing the above script you should get a basic idea of the
execution time of your queries:

     shell> ./query.d
     Who                  Database             Query                                    Time(ms)
     root@localhost       test                 select * from t1 order by i limit 10     0
     root@localhost       test                 set global query_cache_size=0            0
     root@localhost       test                 select * from t1 order by i limit 10     776
     root@localhost       test                 select * from t1 order by i limit 10     773
     root@localhost       test                 select * from t1 order by i desc limit 10 795


File: manual.info,  Node: dba-dtrace-ref-query-parsing,  Next: dba-dtrace-ref-querycache,  Prev: dba-dtrace-ref-query,  Up: dba-dtrace-mysqld-ref

5.4.1.4 Query Parsing Probes
............................

The query parsing probes are triggered before the original SQL
statement is parsed and when the parsing of the statement and
determination of the execution model required to process the statement
has been completed:

     query-parse-start(query)
     query-parse-done(status)

   * `query-parse-start': Triggered just before the statement is parsed
     by the MySQL query parser. The single argument, `query', is a
     string containing the full text of the original query.

   * `query-parse-done': Triggered when the parsing of the original
     statement has been completed. The `status' is an integer
     describing the status of the operation. A `0' indicates that the
     query was successfully parsed. A `1' indicates that the parsing of
     the query failed.

For example, you could monitor the execution time for parsing a given
query using the following D script:

     #!/usr/sbin/dtrace -s

     #pragma D option quiet

     mysql*:::query-parse-start
     {
        self->parsestart = timestamp;
        self->parsequery = copyinstr(arg0);
     }

     mysql*:::query-parse-done
     /arg0 == 0/
     {
        printf("Parsing %s: %d microseconds\n", self->parsequery,((timestamp - self->parsestart)/1000));
     }

     mysql*:::query-parse-done
     /arg0 != 0/
     {
        printf("Error parsing %s: %d microseconds\n", self->parsequery,((timestamp - self->parsestart)/1000));
     }

In the above script a predicate is used on `query-parse-done' so that
different output is generated based on the status value of the probe.

When running the script and monitoring the execution:

     shell> ./query-parsing.d
     Error parsing select from t1 join (t2) on (t1.i = t2.i) order by t1.s,t1.i limit 10: 36 ms
     Parsing select * from t1 join (t2) on (t1.i = t2.i) order by t1.s,t1.i limit 10: 176 ms


File: manual.info,  Node: dba-dtrace-ref-querycache,  Next: dba-dtrace-ref-queryexec,  Prev: dba-dtrace-ref-query-parsing,  Up: dba-dtrace-mysqld-ref

5.4.1.5 Query Cache Probes
..........................

The query cache probes are fired when executing any query. The
`query-cache-hit' query is triggered when a query exists in the query
cache and can be used to return the query cache information. The
arguments contain the original query text and the number of rows
returned from the query cache for the query. If the query is not within
the query cache, or the query cache is not enabled, then the
`query-cache-miss' probe is triggered instead.

     query-cache-hit(query, rows)
     query-cache-miss(query)

   * `query-cache-hit': Triggered when the query has been found within
     the query cache. The first argument, `query', contains the
     original text of the query. The second argument, `rows', is an
     integer containing the number of rows in the cached query.

   * `query-cache-miss': Triggered when the query is not found within
     the query cache. The first argument, `query', contains the original
     text of the query.

The query cache probes are best combined with a probe on the main query
so that you can determine the differences in times between using or not
using the query cache for specified queries. For example, in the
following D script, the query and query cache information are combined
into the information output during monitoring:

     #!/usr/sbin/dtrace -s

     #pragma D option quiet

     dtrace:::BEGIN
     {
        printf("%-20s %-20s %-40s %2s %-9s\n", "Who", "Database", "Query", "QC", "Time(ms)");
     }

     mysql*:::query-start
     {
        self->query = copyinstr(arg0);
        self->connid = arg1;
        self->db    = copyinstr(arg2);
        self->who   = strjoin(copyinstr(arg3),strjoin("@",copyinstr(arg4)));
        self->querystart = timestamp;
        self->qc = 0;
     }

     mysql*:::query-cache-hit
     {
        self->qc = 1;
     }

     mysql*:::query-cache-miss
     {
        self->qc = 0;
     }

     mysql*:::query-done
     {
        printf("%-20s %-20s %-40s %-2s %-9d\n",self->who,self->db,self->query,(self->qc ? "Y" : "N"),
               (timestamp - self->querystart) / 1000000);
     }

When executing the script you can see the effects of the query cache.
Initially the query cache is disabled. If you set the query cache size
and then execute the query multiple times you should see that the query
cache is being used to return the query data:

     shell> ./query-cache.d
     root@localhost       test                 select * from t1 order by i limit 10     N  1072
     root@localhost                            set global query_cache_size=262144       N  0
     root@localhost       test                 select * from t1 order by i limit 10     N  781
     root@localhost       test                 select * from t1 order by i limit 10     Y  0


File: manual.info,  Node: dba-dtrace-ref-queryexec,  Next: dba-dtrace-ref-rowlevel,  Prev: dba-dtrace-ref-querycache,  Up: dba-dtrace-mysqld-ref

5.4.1.6 Query Execution Probes
..............................

The query execution probe is triggered when the actual execution of the
query starts, after the parsing and checking the query cache but before
any privilege checks or optimization. By comparing the difference
between the start and done probes you can monitor the time actually
spent servicing the query (instead of just handling the parsing and
other elements of the query).

     query-exec-start(query, connectionid, database, user, host, exec_type)
     query-exec-done(status)

     *Note*:

     The information provided in the arguments for `query-start' and
     `query-exec-start' are almost identical and designed so that you
     can choose to monitor either the entire query process (using
     `query-start') or only the execution (using `query-exec-start')
     while exposing the core information about the user, client, and
     query being executed.

   * `query-exec-start': Triggered when the execution of a individual
     query is started. The arguments are:

        * `query': The full text of the submitted query.

        * `connectionid': The connection ID of the client that
          submitted the query. The connection ID equals the connection
          ID returned when the client first connects and the `Id' value
          in the output from *Note `SHOW PROCESSLIST': show-processlist.

        * `database': The database name on which the query is being
          executed.

        * `user': The username used to connect to the server.

        * `host': The hostname of the client.

        * `exec_type': The type of execution.  Execution types are
          determined based on the contents of the query and where it
          was submitted. The values for each type are shown in the
          following table.

          This table describes `exec_type' values.

          Value  Description
          0      Executed query from sql_parse, top-level query.
          1      Executed prepared statement
          2      Executed cursor statement
          3      Executed query in stored procedure

   * `query-exec-done': Triggered when the execution of the query has
     completed. The probe includes a single argument, `status', which
     returns 0 when the query is successfully executed and 1 if there
     was an error.


File: manual.info,  Node: dba-dtrace-ref-rowlevel,  Next: dba-dtrace-ref-readrow,  Prev: dba-dtrace-ref-queryexec,  Up: dba-dtrace-mysqld-ref

5.4.1.7 Row-Level Probes
........................

The `*row-{start,done}' probes are triggered each time a row operation
is pushed down to a storage engine.  For example, if you execute an
*Note `INSERT': insert. statement with 100 rows of data, then the
`insert-row-start' and `insert-row-done' probes will be triggered 100
times each, for each row insert.

     insert-row-start(database, table)
     insert-row-done(status)

     update-row-start(database, table)
     update-row-done(status)

     delete-row-start(database, table)
     delete-row-done(status)

   * `insert-row-start': Triggered before a row is inserted into a
     table.

   * `insert-row-done': Triggered after a row is inserted into a table.

   * `update-row-start': Triggered before a row is updated in a table.

   * `update-row-done': Triggered before a row is updated in a table.

   * `delete-row-start': Triggered before a row is deleted from a table.

   * `delete-row-done': Triggered before a row is deleted from a table.

The arguments supported by the probes are consistent for the
corresponding `start' and `done' probes in each case:

   * `database': The database name.

   * `table': The table name.

   * `status': The status; 0 for success or 1 for failure.

Because the row-level probes are triggered for each individual row
access, these probes can be triggered many thousands of times each
second, which may have a detrimental effect on both the monitoring
script and MySQL. The DTrace environment should limit the triggering on
these probes to prevent the performance being adversely affected.
Either use the probes sparingly, or use counter or aggregation
functions to report on these probes and then provide a summary when the
script terminates or as part of a `query-done' or `query-exec-done'
probes.

The following example script summarizes the duration of each row
operation within a larger query:

     #!/usr/sbin/dtrace -s

     #pragma D option quiet

     dtrace:::BEGIN
     {
        printf("%-2s %-10s %-10s %9s %9s %-s \n",
               "St", "Who", "DB", "ConnID", "Dur ms", "Query");
     }

     mysql*:::query-start
     {
        self->query = copyinstr(arg0);
        self->who   = strjoin(copyinstr(arg3),strjoin("@",copyinstr(arg4)));
        self->db    = copyinstr(arg2);
        self->connid = arg1;
        self->querystart = timestamp;
        self->rowdur = 0;
     }

     mysql*:::query-done
     {
        this->elapsed = (timestamp - self->querystart) /1000000;
        printf("%2d %-10s %-10s %9d %9d %s\n",
               arg0, self->who, self->db,
               self->connid, this->elapsed, self->query);
     }

     mysql*:::query-done
     / self->rowdur /
     {
        printf("%34s %9d %s\n", "", (self->rowdur/1000000), "-> Row ops");
     }

     mysql*:::insert-row-start
     {
        self->rowstart = timestamp;
     }

     mysql*:::delete-row-start
     {
        self->rowstart = timestamp;
     }

     mysql*:::update-row-start
     {
        self->rowstart = timestamp;
     }

     mysql*:::insert-row-done
     {
        self->rowdur += (timestamp-self->rowstart);
     }

     mysql*:::delete-row-done
     {
        self->rowdur += (timestamp-self->rowstart);
     }

     mysql*:::update-row-done
     {
        self->rowdur += (timestamp-self->rowstart);
     }

Running the above script with a query that inserts data into a table,
you can monitor the exact time spent performing the raw row insertion:

     St Who        DB            ConnID    Dur ms Query
      0 @localhost test              13     20767 insert into t1(select * from t2)
                                             4827 -> Row ops


File: manual.info,  Node: dba-dtrace-ref-readrow,  Next: dba-dtrace-ref-index,  Prev: dba-dtrace-ref-rowlevel,  Up: dba-dtrace-mysqld-ref

5.4.1.8 Read Row Probes
.......................

The read row probes are triggered at a storage engine level each time a
row read operation occurs. These probes are specified within each
storage engine (as opposed to the `*row-start' probes which are in the
storage engine interface). These probes can therefore be used to monitor
individual storage engine row-level operations and performance.
Because these probes are triggered around the storage engine row read
interface, they may be hit a significant number of times during a basic
query.

     read-row-start(database, table, scan_flag)
     read-row-done(status)

   * `read-row-start': Triggered when a row is read by the storage
     engine from the specified `database' and `table'.  The `scan_flag'
     is set to 1 (true) when the read is part of a table scan (that is,
     a sequential read), or 0 (false) when the read is of a specific
     record.

   * `read-row-done': Triggered when a row read operation within a
     storage engine completes. The `status' returns 0 on success, or a
     positive value on failure.


File: manual.info,  Node: dba-dtrace-ref-index,  Next: dba-dtrace-ref-lock,  Prev: dba-dtrace-ref-readrow,  Up: dba-dtrace-mysqld-ref

5.4.1.9 Index Probes
....................

The index probes are triggered each time a a row is read using one of
the indexes for the specified table. The probe is triggered within the
corresponding storage engine for the table.

     index-read-row-start(database, table)
     index-read-row-done(status)

   * `index-read-row-start': Triggered when a row is read by the
     storage engine from the specified `database' and `table'.

   * `index-read-row-done': Triggered when an indexed row read
     operation within a storage engine completes. The `status' returns
     0 on success, or a positive value on failure.


File: manual.info,  Node: dba-dtrace-ref-lock,  Next: dba-dtrace-ref-filesort,  Prev: dba-dtrace-ref-index,  Up: dba-dtrace-mysqld-ref

5.4.1.10 Lock Probes
....................

The lock probes are called whenever an external lock is requested by
MySQL for a table using the corresponding lock mechanism on the table
as defined by the table's engine type.  There are three different types
of lock, the read lock, write lock, and unlock operations. Using the
probes you can determine the duration of the external locking routine
(that is, the time taken by the storage engine to implement the lock,
including any time waiting for another lock to become free) and the
total duration of the lock/unlock process.

     handler-rdlock-start(database, table)
     handler-rdlock-done(status)

     handler-wrlock-start(database, table)
     handler-wrlock-done(status)

     handler-unlock-start(database, table)
     handler-unlock-done(status)

   * `handler-rdlock-start': Triggered when a read lock is requested on
     the specified `database' and `table'.

   * `handler-wrlock-start': Triggered when a write lock is requested
     on the specified `database' and `table'.

   * `handler-unlock-start': Triggered when an unlock request is made
     on the specified `database' and `table'.

   * `handler-rdlock-done': Triggered when a read lock request
     completes. The `status' is 0 if the lock operation succeeded, or
     `>0' on failure.

   * `handler-wrlock-done': Triggered when a write lock request
     completes. The `status' is 0 if the lock operation succeeded, or
     `>0' on failure.

   * `handler-unlock-done': Triggered when an unlock request completes.
     The `status' is 0 if the unlock operation succeeded, or `>0' on
     failure.

You can use arrays to monitor the locking and unlocking of individual
tables and then calculate the duration of the entire table lock using
the following script:

     #!/usr/sbin/dtrace -s

     #pragma D option quiet

     mysql*:::handler-rdlock-start
     {
        self->rdlockstart = timestamp;
        this->lockref = strjoin(copyinstr(arg0),strjoin("@",copyinstr(arg1)));
        self->lockmap[this->lockref] = self->rdlockstart;
        printf("Start: Lock->Read   %s.%s\n",copyinstr(arg0),copyinstr(arg1));
     }

     mysql*:::handler-wrlock-start
     {
        self->wrlockstart = timestamp;
        this->lockref = strjoin(copyinstr(arg0),strjoin("@",copyinstr(arg1)));
        self->lockmap[this->lockref] = self->rdlockstart;
        printf("Start: Lock->Write  %s.%s\n",copyinstr(arg0),copyinstr(arg1));
     }

     mysql*:::handler-unlock-start
     {
        self->unlockstart = timestamp;
        this->lockref = strjoin(copyinstr(arg0),strjoin("@",copyinstr(arg1)));
        printf("Start: Lock->Unlock %s.%s (%d ms lock duration)\n",
               copyinstr(arg0),copyinstr(arg1),
               (timestamp - self->lockmap[this->lockref])/1000000);
     }

     mysql*:::handler-rdlock-done
     {
        printf("End:   Lock->Read   %d ms\n",
               (timestamp - self->rdlockstart)/1000000);
     }

     mysql*:::handler-wrlock-done
     {
        printf("End:   Lock->Write  %d ms\n",
               (timestamp - self->wrlockstart)/1000000);
     }

     mysql*:::handler-unlock-done
     {
        printf("End:   Lock->Unlock %d ms\n",
               (timestamp - self->unlockstart)/1000000);
     }

When executed, you should get information both about the duration of
the locking process itself, and of the locks on a specific table:

     Start: Lock->Read   test.t2
     End:   Lock->Read   0 ms
     Start: Lock->Unlock test.t2 (25743 ms lock duration)
     End:   Lock->Unlock 0 ms
     Start: Lock->Read   test.t2
     End:   Lock->Read   0 ms
     Start: Lock->Unlock test.t2 (1 ms lock duration)
     End:   Lock->Unlock 0 ms
     Start: Lock->Read   test.t2
     End:   Lock->Read   0 ms
     Start: Lock->Unlock test.t2 (1 ms lock duration)
     End:   Lock->Unlock 0 ms
     Start: Lock->Read   test.t2
     End:   Lock->Read   0 ms


File: manual.info,  Node: dba-dtrace-ref-filesort,  Next: dba-dtrace-ref-statement,  Prev: dba-dtrace-ref-lock,  Up: dba-dtrace-mysqld-ref

5.4.1.11 Filesort Probes
........................

The filesort probes are triggered whenever a filesort operation is
applied to a table. For more information on filesort and the conditions
under which it occurs, see *Note order-by-optimization::.

     filesort-start(database, table)
     filesort-done(status, rows)

   * `filesort-start': Triggered when the filesort operation starts on
     a table. The two arguments to the probe, `database' and `table',
     will identify the table being sorted.

   * `filesort-done': Triggered when the filesort operation completes.
     Two arguments are supplied, the `status' (0 for success, 1 for
     failure), and the number of rows sorted during the filesort
     process.

An example of this is in the following script, which tracks the
duration of the filesort process in addition to the duration of the
main query:

     #!/usr/sbin/dtrace -s

     #pragma D option quiet

     dtrace:::BEGIN
     {
        printf("%-2s %-10s %-10s %9s %18s %-s \n",
               "St", "Who", "DB", "ConnID", "Dur microsec", "Query");
     }

     mysql*:::query-start
     {
        self->query = copyinstr(arg0);
        self->who   = strjoin(copyinstr(arg3),strjoin("@",copyinstr(arg4)));
        self->db    = copyinstr(arg2);
        self->connid = arg1;
        self->querystart = timestamp;
        self->filesort = 0;
        self->fsdb = "";
        self->fstable = "";
     }

     mysql*:::filesort-start
     {
       self->filesort = timestamp;
       self->fsdb = copyinstr(arg0);
       self->fstable = copyinstr(arg1);
     }

     mysql*:::filesort-done
     {
        this->elapsed = (timestamp - self->filesort) /1000;
        printf("%2d %-10s %-10s %9d %18d Filesort on %s\n",
               arg0, self->who, self->fsdb,
               self->connid, this->elapsed, self->fstable);
     }

     mysql*:::query-done
     {
        this->elapsed = (timestamp - self->querystart) /1000;
        printf("%2d %-10s %-10s %9d %18d %s\n",
               arg0, self->who, self->db,
               self->connid, this->elapsed, self->query);
     }

Executing a query on a large table with an `ORDER BY' clause that
triggers a filesort, and then creating an index on the table and then
repeating the same query, you can see the difference in execution speed:

     St Who        DB            ConnID       Dur microsec Query
      0 @localhost test              14           11335469 Filesort on t1
      0 @localhost test              14           11335787 select * from t1 order by i limit 100
      0 @localhost test              14          466734378 create index t1a on t1 (i)
      0 @localhost test              14              26472 select * from t1 order by i limit 100


File: manual.info,  Node: dba-dtrace-ref-statement,  Next: dba-dtrace-ref-network,  Prev: dba-dtrace-ref-filesort,  Up: dba-dtrace-mysqld-ref

5.4.1.12 Statement Probes
.........................

The individual statement probes are provided to give specific
information about different statement types. For the start probes the
string of the query is provided as a the only argument. Depending on
the statement type, the information provided by the corresponding done
probe will differ. For all done probes the status of the operation (`0'
for success, `>0' for failure) is provided.  For *Note `SELECT': select,
*Note `INSERT': insert, *Note `INSERT ... (SELECT FROM ...)': insert,
*Note `DELETE': delete, and *Note `DELETE FROM t1,t2': delete.
operations the number of rows affected is returned.

For *Note `UPDATE': update. and *Note `UPDATE t1,t2 ...': update.
statements the number of rows matched and the number of rows actually
changed is provided. This is because the number of rows actually
matched by the corresponding `WHERE' clause, and the number of rows
changed can differ. MySQL does not update the value of a row if the
value already matches the new setting.

     select-start(query)
     select-done(status,rows)

     insert-start(query)
     insert-done(status,rows)

     insert-select-start(query)
     insert-select-done(status,rows)

     update-start(query)
     update-done(status,rowsmatched,rowschanged)

     multi-update-start(query)
     multi-update-done(status,rowsmatched,rowschanged)

     delete-start(query)
     delete-done(status,rows)

     multi-delete-start(query)
     multi-delete-done(status,rows)

   * `select-start': Triggered before a *Note `SELECT': select.
     statement.

   * `select-done': Triggered at the end of a *Note `SELECT': select.
     statement.

   * `insert-start': Triggered before a *Note `INSERT': insert.
     statement.

   * `insert-done': Triggered at the end of an *Note `INSERT': insert.
     statement.

   * `insert-select-start': Triggered before an *Note `INSERT ...
     SELECT': insert. statement.

   * `insert-select-done': Triggered at the end of an *Note `INSERT ...
     SELECT': insert. statement.

   * `update-start': Triggered before an *Note `UPDATE': update.
     statement.

   * `update-done': Triggered at the end of an *Note `UPDATE': update.
     statement.

   * `multi-update-start': Triggered before an *Note `UPDATE': update.
     statement involving multiple tables.

   * `multi-update-done': Triggered at the end of an *Note `UPDATE':
     update. statement involving multiple tables.

   * `delete-start': Triggered before a *Note `DELETE': delete.
     statement.

   * `delete-done': Triggered at the end of a *Note `DELETE': delete.
     statement.

   * `multi-delete-start': Triggered before a *Note `DELETE': delete.
     statement involving multiple tables.

   * `multi-delete-done': Triggered at the end of a *Note `DELETE':
     delete. statement involving multiple tables.

The arguments for the statement probes are:

   * `query': The query string.

   * `status': The status of the query.  `0' for success, and `>0' for
     failure.

   * `rows': The number of rows affected by the statement. This returns
     the number rows found for *Note `SELECT': select, the number of
     rows deleted for *Note `DELETE': delete, and the number of rows
     successfully inserted for *Note `INSERT': insert.

   * `rowsmatched': The number of rows matched by the `WHERE' clause of
     an *Note `UPDATE': update. operation.

   * `rowschanged': The number of rows actually changed during an *Note
     `UPDATE': update.  operation.

You use these probes to monitor the execution of these statement types
without having to monitor the user or client executing the statements.
A simple example of this is to track the execution times:

     #!/usr/sbin/dtrace -s

     #pragma D option quiet

     dtrace:::BEGIN
     {
        printf("%-60s %-8s %-8s %-8s\n", "Query", "RowsU", "RowsM", "Dur (ms)");
     }

     mysql*:::update-start, mysql*:::insert-start,
     mysql*:::delete-start, mysql*:::multi-delete-start,
     mysql*:::multi-delete-done, mysql*:::select-start,
     mysql*:::insert-select-start, mysql*:::multi-update-start
     {
         self->query = copyinstr(arg0);
         self->querystart = timestamp;
     }

     mysql*:::insert-done, mysql*:::select-done,
     mysql*:::delete-done, mysql*:::multi-delete-done, mysql*:::insert-select-done
     / self->querystart /
     {
         this->elapsed = ((timestamp - self->querystart)/1000000);
         printf("%-60s %-8d %-8d %d\n",
                self->query,
                0,
                arg1,
                this->elapsed);
         self->querystart = 0;
     }

     mysql*:::update-done, mysql*:::multi-update-done
     / self->querystart /
     {
         this->elapsed = ((timestamp - self->querystart)/1000000);
         printf("%-60s %-8d %-8d %d\n",
                self->query,
                arg1,
                arg2,
                this->elapsed);
         self->querystart = 0;
     }

When executed you can see the basic execution times and rows matches:

     Query                                                        RowsU    RowsM    Dur (ms)
     select * from t2                                             0        275      0
     insert into t2 (select * from t2)                            0        275      9
     update t2 set i=5 where i > 75                               110      110      8
     update t2 set i=5 where i < 25                               254      134      12
     delete from t2 where i < 5                                   0        0        0

Another alternative is to use the aggregation functions in DTrace to
aggregate the execution time of individual statements together:

     #!/usr/sbin/dtrace -s

     #pragma D option quiet

     mysql*:::update-start, mysql*:::insert-start,
     mysql*:::delete-start, mysql*:::multi-delete-start,
     mysql*:::multi-delete-done, mysql*:::select-start,
     mysql*:::insert-select-start, mysql*:::multi-update-start
     {
         self->querystart = timestamp;
     }

     mysql*:::select-done
     {
             @statements["select"] = sum(((timestamp - self->querystart)/1000000));
     }

     mysql*:::insert-done, mysql*:::insert-select-done
     {
             @statements["insert"] = sum(((timestamp - self->querystart)/1000000));
     }

     mysql*:::update-done, mysql*:::multi-update-done
     {
             @statements["update"] = sum(((timestamp - self->querystart)/1000000));
     }

     mysql*:::delete-done, mysql*:::multi-delete-done
     {
             @statements["delete"] = sum(((timestamp - self->querystart)/1000000));
     }

     tick-30s
     {
             printa(@statements);
     }

The script just shown aggregates the times spent doing each operation,
which could be used to help benchmark a standard suite of tests.

      delete                                                            0
       update                                                            0
       insert                                                           23
       select                                                         2484

       delete                                                            0
       update                                                            0
       insert                                                           39
       select                                                        10744

       delete                                                            0
       update                                                           26
       insert                                                           56
       select                                                        10944

       delete                                                            0
       update                                                           26
       insert                                                         2287
       select                                                        15985


File: manual.info,  Node: dba-dtrace-ref-network,  Next: dba-dtrace-ref-keycache,  Prev: dba-dtrace-ref-statement,  Up: dba-dtrace-mysqld-ref

5.4.1.13 Network Probes
.......................

The network probes monitor the transfer of information from the MySQL
server and clients of all types over the network. The probes are
defined as follows:

     net-read-start()
     net-read-done(status, bytes)
     net-write-start(bytes)
     net-write-done(status)

   * `net-read-start': Triggered when a network read operation is
     started.

   * `net-read-done': Triggered when the network read operation
     completes. The `status' is an `integer' representing the return
     status for the operation, `0' for success and `1' for failure. The
     `bytes' argument is an integer specifying the number of bytes read
     during the process.

   * `net-start-bytes': Triggered when data is written to a network
     socket. The single argument, `bytes', specifies the number of bytes
     written to the network socket.

   * `net-write-done': Triggered when the network write operation has
     completed. The single argument, `status', is an integer
     representing the return status for the operation, `0' for success
     and `1' for failure.

You can use the network probes to monitor the time spent reading from
and writing to network clients during execution. The following D script
provides an example of this. Both the cumulative time for the read or
write is calculated, and the number of bytes. Note that the dynamic
variable size has been increased (using the `dynvarsize' option) to
cope with the rapid firing of the individual probes for the network
reads/writes.

     #!/usr/sbin/dtrace -s

     #pragma D option quiet
     #pragma D option dynvarsize=4m

     dtrace:::BEGIN
     {
        printf("%-2s %-30s %-10s %9s %18s %-s \n",
               "St", "Who", "DB", "ConnID", "Dur microsec", "Query");
     }

     mysql*:::query-start
     {
        self->query = copyinstr(arg0);
        self->who   = strjoin(copyinstr(arg3),strjoin("@",copyinstr(arg4)));
        self->db    = copyinstr(arg2);
        self->connid = arg1;
        self->querystart = timestamp;
        self->netwrite = 0;
        self->netwritecum = 0;
        self->netwritebase = 0;
        self->netread = 0;
        self->netreadcum = 0;
        self->netreadbase = 0;
     }

     mysql*:::net-write-start
     {
        self->netwrite += arg0;
        self->netwritebase = timestamp;
     }

     mysql*:::net-write-done
     {
        self->netwritecum += (timestamp - self->netwritebase);
        self->netwritebase = 0;
     }

     mysql*:::net-read-start
     {
        self->netreadbase = timestamp;
     }

     mysql*:::net-read-done
     {
        self->netread += arg1;
        self->netreadcum += (timestamp - self->netreadbase);
        self->netreadbase = 0;
     }

     mysql*:::query-done
     {
        this->elapsed = (timestamp - self->querystart) /1000000;
        printf("%2d %-30s %-10s %9d %18d %s\n",
               arg0, self->who, self->db,
               self->connid, this->elapsed, self->query);
        printf("Net read: %d bytes (%d ms) write: %d bytes (%d ms)\n",
                    self->netread, (self->netreadcum/1000000),
                    self->netwrite, (self->netwritecum/1000000));
     }

When executing the above script on a machine with a remote client, you
can see that approximately a third of the time spent executing the
query is related to writing the query results back to the client.

     St Who                            DB            ConnID       Dur microsec Query
      0 root@::ffff:192.168.0.108      test              31               3495 select * from t1 limit 1000000
     Net read: 0 bytes (0 ms) write: 10000075 bytes (1220 ms)


File: manual.info,  Node: dba-dtrace-ref-keycache,  Prev: dba-dtrace-ref-network,  Up: dba-dtrace-mysqld-ref

5.4.1.14 Keycache Probes
........................

The keycache probes are triggered when using the index key cache used
with the MyISAM storage engine. Probes exist to monitor when data is
read into the keycache, cached key data is written from the cache into
a cached file, or when accessing the keycache.

Keycache usage indicates when data is read or written from the index
files into the cache, and can be used to monitor how efficient the
memory allocated to the keycache is being used. A high number of
keycache reads across a range of queries may indicate that the keycache
is too small for size of data being accessed.

     keycache-read-start(filepath, bytes, mem_used, mem_free)
     keycache-read-block(bytes)
     keycache-read-hit()
     keycache-read-miss()
     keycache-read-done(mem_used, mem_free)
     keycache-write-start(filepath, bytes, mem_used, mem_free)
     keycache-write-block(bytes)
     keycache-write-done(mem_used, mem_free)

When reading data from the index files into the keycache, the process
first initializes the read operation (indicated by
`keycache-read-start'), then loads blocks of data
(`keycache-read-block'), and then the read block is either matches the
data being identified (`keycache-read-hit') or more data needs to be
read (`keycache-read-miss'). Once the read operation has completed,
reading stops with the `keycache-read-done'.

Data will be read from the index file into the keycache only when the
specified key is not already within the keycache.

   * `keycache-read-start': Triggered when the keycache read operation
     is started. Data is read from the specified `filepath', reading
     the specified number of `bytes'. The `mem_used' and `mem_avail'
     indicate memory currently used by the keycache and the amount of
     memory available within the keycache.

   * `keycache-read-block': Triggered when the keycache reads a block
     of data, of the specified number of `bytes', from the index file
     into the keycache.

   * `keycache-read-hit': Triggered when the block of data read from
     the index file matches the key data requested.

   * `keycache-read-miss': Triggered when the block of data read from
     the index file does not match the key data needed.

   * `keycache-read-done': Triggered when the keycache read operation
     has completed. The `mem_used' and `mem_avail' indicate memory
     currently used by the keycache and the amount of memory available
     within the keycache.

Keycache writes occur when the index information is updated during an
`INSERT', `UPDATE', or `DELETE' operation, and the cached key
information is flushed back to the index file.

   * `keycache-write-start': Triggered when the keycache write
     operation is started. Data is written to the specified `filepath',
     reading the specified number of `bytes'. The `mem_used' and
     `mem_avail' indicate memory currently used by the keycache and the
     amount of memory available within the keycache.

   * `keycache-write-block': Triggered when the keycache writes a block
     of data, of the specified number of `bytes', to the index file
     from the keycache.

   * `keycache-write-done': Triggered when the keycache write operation
     has completed. The `mem_used' and `mem_avail' indicate memory
     currently used by the keycache and the amount of memory available
     within the keycache.


File: manual.info,  Node: security,  Next: backup-and-recovery,  Prev: server-administration,  Up: Top

6 Security
**********

* Menu:

* general-security-issues::      General Security Issues
* privilege-system::             The MySQL Access Privilege System
* user-account-management::      MySQL User Account Management

When thinking about security within a MySQL installation, you should
consider a wide range of possible topics and how they affect the
security of your MySQL server and related applications:

   * General factors that affect security. These include choosing good
     passwords, not granting unnecessary privileges to users, ensuring
     application security by preventing SQL injections and data
     corruption, and others. See *Note general-security-issues::.

   * Security of the installation itself. The data files, log files,
     and the all the application files of your installation should be
     protected to ensure that they are not readable or writable by
     unauthorized parties. For more information, see *Note
     postinstallation::.

   * Access control and security within the database system itself,
     including the users and databases granted with access to the
     databases, views and stored programs in use within the database.
     For more information, see *Note privilege-system::, and *Note
     user-account-management::.

   * Network security of MySQL and your system. The security is related
     to the grants for individual users, but you may also wish to
     restrict MySQL so that it is available only locally on the MySQL
     server host, or to a limited set of other hosts.

   * Ensure that you have adequate and appropriate backups of your
     database files, configuration and log files. Also be sure that you
     have a recovery solution in place and test that you are able to
     successfully recover the information from your backups. See *Note
     backup-and-recovery::.


File: manual.info,  Node: general-security-issues,  Next: privilege-system,  Prev: security,  Up: security

6.1 General Security Issues
===========================

* Menu:

* security-guidelines::          Security Guidelines
* password-security::            Keeping Passwords Secure
* security-against-attack::      Making MySQL Secure Against Attackers
* security-options::             Security-Related `mysqld' Options and Variables
* changing-mysql-user::          How to Run MySQL as a Normal User
* load-data-local::              Security Issues with `LOAD DATA LOCAL'
* secure-client-programming::    Client Programming Security Guidelines

This section describes general security issues to be aware of and what
you can do to make your MySQL installation more secure against attack
or misuse. For information specifically about the access control system
that MySQL uses for setting up user accounts and checking database
access, see *Note postinstallation::.

For answers to some questions that are often asked about MySQL Server
security issues, see *Note faqs-security::.


File: manual.info,  Node: security-guidelines,  Next: password-security,  Prev: general-security-issues,  Up: general-security-issues

6.1.1 Security Guidelines
-------------------------

Anyone using MySQL on a computer connected to the Internet should read
this section to avoid the most common security mistakes.

In discussing security, it is necessary to consider fully protecting
the entire server host (not just the MySQL server) against all types of
applicable attacks: eavesdropping, altering, playback, and denial of
service. We do not cover all aspects of availability and fault
tolerance here.

MySQL uses security based on Access Control Lists (ACLs) for all
connections, queries, and other operations that users can attempt to
perform. There is also support for SSL-encrypted connections between
MySQL clients and servers. Many of the concepts discussed here are not
specific to MySQL at all; the same general ideas apply to almost all
applications.

When running MySQL, follow these guidelines:

   * *Do not ever give anyone (except MySQL `root' accounts) access to
     the `user' table in the `mysql' database!* This is critical.

   * Learn how the MySQL access privilege system works (see *Note
     privilege-system::). Use the *Note `GRANT': grant. and *Note
     `REVOKE': revoke. statements to control access to MySQL. Do not
     grant more privileges than necessary.  Never grant privileges to
     all hosts.

     Checklist:

        * Try `mysql -u root'. If you are able to connect successfully
          to the server without being asked for a password, anyone can
          connect to your MySQL server as the MySQL `root' user with
          full privileges!  Review the MySQL installation instructions,
          paying particular attention to the information about setting a
          `root' password. See *Note default-privileges::.

        * Use the *Note `SHOW GRANTS': show-grants.  statement to check
          which accounts have access to what.  Then use the *Note
          `REVOKE': revoke.  statement to remove those privileges that
          are not necessary.

   * Do not store cleartext passwords in your database. If your
     computer becomes compromised, the intruder can take the full list
     of passwords and use them. Instead, use `SHA2()', `SHA1()',
     `MD5()', or some other one-way hashing function and store the hash
     value.

   * Do not choose passwords from dictionaries. Special programs exist
     to break passwords. Even passwords like `xfish98' are very bad.
     Much better is `duag98' which contains the same word `fish' but
     typed one key to the left on a standard QWERTY keyboard. Another
     method is to use a password that is taken from the first
     characters of each word in a sentence (for example, `Four score
     and seven years ago' results in a password of `Fsasya').  The
     password is easy to remember and type, but difficult to guess for
     someone who does not know the sentence. In this case, you can
     additionally substitute digits for the number words to obtain the
     phrase `4 score and 7 years ago', yielding the password `4sa7ya'
     which is even more difficult to guess.

   * Invest in a firewall. This protects you from at least 50% of all
     types of exploits in any software. Put MySQL behind the firewall
     or in a demilitarized zone (DMZ).

     Checklist:

        * Try to scan your ports from the Internet using a tool such as
          `nmap'. MySQL uses port 3306 by default. This port should not
          be accessible from untrusted hosts. As a simple way to check
          whether your MySQL port is open, try the following command
          from some remote machine, where SERVER_HOST is the host name
          or IP address of the host on which your MySQL server runs:

               shell> telnet SERVER_HOST 3306

          If `telnet' hangs or the connection is refused, the port is
          blocked, which is how you want it to be. If you get a
          connection and some garbage characters, the port is open, and
          should be closed on your firewall or router, unless you
          really have a good reason to keep it open.

   * Applications that access MySQL should not trust any data entered
     by users, and should be written using proper defensive programming
     techniques. See *Note secure-client-programming::.

   * Do not transmit plain (unencrypted) data over the Internet.  This
     information is accessible to everyone who has the time and ability
     to intercept it and use it for their own purposes.  Instead, use
     an encrypted protocol such as SSL or SSH. MySQL supports internal
     SSL connections. Another technique is to use SSH port-forwarding
     to create an encrypted (and compressed) tunnel for the
     communication.

   * Learn to use the `tcpdump' and `strings' utilities. In most cases,
     you can check whether MySQL data streams are unencrypted by
     issuing a command like the following:

          shell> tcpdump -l -i eth0 -w - src or dst port 3306 | strings

     This works under Linux and should work with small modifications
     under other systems.

     *Warning*:

     If you do not see cleartext data, this does not always mean that
     the information actually is encrypted. If you need high security,
     consult with a security expert.


File: manual.info,  Node: password-security,  Next: security-against-attack,  Prev: security-guidelines,  Up: general-security-issues

6.1.2 Keeping Passwords Secure
------------------------------

* Menu:

* password-security-user::       End-User Guidelines for Password Security
* password-security-admin::      Administrator Guidelines for Password Security
* password-logging::             Passwords and Logging
* password-hashing::             Password Hashing in MySQL
* application-password-use::     Implications of Password Hashing Changes in MySQL 4.1 for Application Programs

Passwords occur in several contexts within MySQL. The following
sections provide guidelines that enable end users and administrators to
keep these passwords secure and avoid exposing them. There is also a
discussion of how MySQL uses password hashing internally.


File: manual.info,  Node: password-security-user,  Next: password-security-admin,  Prev: password-security,  Up: password-security

6.1.2.1 End-User Guidelines for Password Security
.................................................

MySQL users should use the following guidelines to keep passwords
secure.

When you run a client program to connect to the MySQL server, it is
inadvisable to specify your password in a way that exposes it to
discovery by other users. The methods you can use to specify your
password when you run client programs are listed here, along with an
assessment of the risks of each method. In short, the safest methods
are to have the client program prompt for the password or to specify
the password in a properly protected option file.

   * Use a `-pYOUR_PASS' or `--password=YOUR_PASS' option on the
     command line. For example:

          shell> mysql -u francis -pfrank DB_NAME

     This is convenient _but insecure_. On some systems, your password
     becomes visible to system status programs such as `ps' that may be
     invoked by other users to display command lines. MySQL clients
     typically overwrite the command-line password argument with zeros
     during their initialization sequence. However, there is still a
     brief interval during which the value is visible.  Also, on some
     systems this overwriting strategy is ineffective and the password
     remains visible to `ps'. (SystemV Unix systems and perhaps others
     are subject to this problem.)

     If your operating environment is set up to display your current
     command in the title bar of your terminal window, the password
     remains visible as long as the command is running, even if the
     command has scrolled out of view in the window content area.

   * Use the `-p' or `--password' option on the command line with no
     password value specified.  In this case, the client program
     solicits the password interactively:

          shell> mysql -u francis -p DB_NAME
          Enter password: ********

     The ``*'' characters indicate where you enter your password. The
     password is not displayed as you enter it.

     It is more secure to enter your password this way than to specify
     it on the command line because it is not visible to other users.
     However, this method of entering a password is suitable only for
     programs that you run interactively. If you want to invoke a
     client from a script that runs noninteractively, there is no
     opportunity to enter the password from the keyboard. On some
     systems, you may even find that the first line of your script is
     read and interpreted (incorrectly) as your password.

   * Store your password in an option file. For example, on Unix, you
     can list your password in the `[client]' section of the `.my.cnf'
     file in your home directory:

          [client]
          password=your_pass

     To keep the password safe, the file should not be accessible to
     anyone but yourself. To ensure this, set the file access mode to
     `400' or `600'.  For example:

          shell> chmod 600 .my.cnf

     To name from the command line a specific option file containing
     the password, use the `--defaults-file=FILE_NAME' option, where
     `file_name' is the full path name to the file. For example:

          shell> mysql --defaults-file=/home/francis/mysql-opts

     *Note option-files::, discusses option files in more detail.

   * Store your password in the `MYSQL_PWD' environment variable. See
     *Note environment-variables::.

     This method of specifying your MySQL password must be considered
     _extremely insecure_ and should not be used. Some versions of `ps'
     include an option to display the environment of running processes.
     On some systems, if you set `MYSQL_PWD', your password is exposed
     to any other user who runs `ps'. Even on systems without such a
     version of `ps', it is unwise to assume that there are no other
     methods by which users can examine process environments.

On Unix, the *Note `mysql': mysql. client writes a record of executed
statements to a history file (see *Note mysql-logging::). By default,
this file is named `.mysql_history' and is created in your home
directory. Passwords can be written as plain text in SQL statements
such as *Note `CREATE USER': create-user, *Note `GRANT': grant, and
*Note `SET PASSWORD': set-password, so if you use these statements,
they are logged in the history file. To keep this file safe, use a
restrictive access mode, the same way as described earlier for the
`.my.cnf' file.

If your command interpreter is configured to maintain a history, any
file in which the commands are saved will contain MySQL passwords
entered on the command line. For example, `bash' uses
`~/.bash_history'. Any such file should have a restrictive access mode.


File: manual.info,  Node: password-security-admin,  Next: password-logging,  Prev: password-security-user,  Up: password-security

6.1.2.2 Administrator Guidelines for Password Security
......................................................

Database administrators should use the following guidelines to keep
passwords secure.

MySQL stores passwords for user accounts in the `mysql.user' table.
Access to this table should never be granted to any nonadministrative
accounts.

A user who has access to modify the plugin directory (the value of the
`plugin_dir' system variable) or the `my.cnf' file that specifies the
location of the plugin directory can replace plugins and modify the
capabilities provided by plugins, including authentication plugins.

Files such as log files to which passwords might be written should be
protected. See *Note password-logging::.


File: manual.info,  Node: password-logging,  Next: password-hashing,  Prev: password-security-admin,  Up: password-security

6.1.2.3 Passwords and Logging
.............................

Passwords can be written as plain text in SQL statements such as *Note
`CREATE USER': create-user, *Note `GRANT': grant, and *Note `SET
PASSWORD': set-password, or statements that invoke the `PASSWORD()'
function.  If these statements are logged by the MySQL server as
written, such passwords become available to anyone with access to the
logs. This applies to the general query log, the slow query log, and
the binary log (see *Note server-logs::).

Contents of the audit log file produced by the audit log plugin are not
encrypted. For security reasons, this file should be written to a
directory accessible only to the MySQL server and users with a
legitimate reason to view the log. See *Note audit-log-security::.

To guard against unwarranted exposure to log files, they should be
located in a directory that restricts access to only the server and the
database administrator. If you log to tables in the `mysql' database,
access to the tables should never be granted to any nonadministrative
accounts.

Replication slaves store the password for the replication master in the
`master.info' file. Restrict this file to be accessible only to the
database administrator.

Database backups that include tables or log files containing passwords
should be protected using a restricted access mode.


File: manual.info,  Node: password-hashing,  Next: application-password-use,  Prev: password-logging,  Up: password-security

6.1.2.4 Password Hashing in MySQL
.................................

MySQL lists user accounts in the `user' table of the `mysql' database.
Each MySQL account can be assigned a password, although the `user'
table does not store the cleartext version of the password, but a hash
value computed from it.

MySQL uses passwords in two phases of client/server communication:

   * When a client attempts to connect to the server, there is an
     initial authentication step in which the client must present a
     password that has a hash value matching the hash value stored in
     the `user' table for the account the client wants to use.

   * After the client connects, it can (if it has sufficient
     privileges) set or change the password hash for accounts listed in
     the `user' table. The client can do this by using the `PASSWORD()'
     function to generate a password hash, or by using a
     password-generating statement (*Note `CREATE USER': create-user,
     *Note `GRANT': grant, or *Note `SET PASSWORD': set-password.).

In other words, the server _checks_ hash values during authentication
when a client first attempts to connect. The server _generates_ hash
values if a connected client invokes the `PASSWORD()' function or uses a
password-generating statement to set or change a password.

Password hashing methods in MySQL have the history described following.
These changes are illustrated by changes in the result from the
`PASSWORD()' function that computes password hash values and in the
structure of the `user' table where passwords are stored.

* The Original (Pre-4.1) Hashing Method *

The original hashing method produced a 16-byte string. Such hashes look
like this:

     mysql> SELECT PASSWORD('mypass');
     +--------------------+
     | PASSWORD('mypass') |
     +--------------------+
     | 6f8c114b58f2ce9e   |
     +--------------------+

To store account passwords, the `Password' column of the `user' table
was at this point 16 bytes long.

* The 4.1 Hashing Method *

MySQL 4.1 introduced password hashing that provides better security and
reduces the risk of passwords being intercepted.  There were several
aspects to this change:

   * Different `PASSWORD()' function result format

   * Widening of the `Password' column

   * Control over the default hashing method

   * Control over the permitted hashing methods for clients attempting
     to connect to the server

The changes in MySQL 4.1 took place in two stages:

   * MySQL 4.1.0 used a preliminary version of the 4.1 hashing method.
     Because this method was so short lived, the following discussion
     says no more about it.

   * In MySQL 4.1.1, the hashing method was modified to produce a
     longer 41-byte hash value:

          mysql> SELECT PASSWORD('mypass');
          +-------------------------------------------+
          | PASSWORD('mypass')                        |
          +-------------------------------------------+
          | *6C8989366EAF75BB670AD8EA7A7FC1176A95CEF4 |
          +-------------------------------------------+

     The longer password hash format has better cryptographic
     properties, and client authentication based on long hashes is more
     secure than that based on the older short hashes.

     To accommodate longer password hashes, the `Password' column in the
     `user' table was changed at this point to be 41 bytes, its current
     length.

     A widened `Password' column can store password hashes in both the
     pre-4.1 and 4.1 formats. The format of any given hash value can be
     determined two ways:

        * The length: 4.1 and pre-4.1 hashes are 41 and 16 bytes,
          respectively.

        * Password hashes in the 4.1 format always begin with a ``*''
          character, whereas passwords in the pre-4.1 format never do.

     To permit explicit generation of pre-4.1 password hashes, two
     additional changes were made:

        * The `OLD_PASSWORD()' function was added, which returns hash
          values in the 16-byte format.

        * For compatibility purposes, the `old_passwords' system
          variable was added, to enable DBAs and applications control
          over the hashing method. The default `old_passwords' value of
          0 causes hashing to use the 4.1 method (41-byte hash values),
          but setting `old_passwords=1' causes hashing to use the
          pre-4.1 method. In this case, `PASSWORD()' produces 16-byte
          values and is equivalent to `OLD_PASSWORD()'

     To permit DBAs control over how clients are permitted to connect,
     the `secure_auth' system variable was added. Starting the server
     with this variable disabled or enabled permits or prohibits
     clients to connect using the older pre-4.1 password hashing method.
     Before MySQL 5.6.5, `secure_auth' is disabled by default. As of
     5.6.5, `secure_auth' is enabled by default to promote a more
     secure default configuration.  (DBAs can disable it at their
     discretion, but this is not recommended.)

     In addition, the *Note `mysql': mysql. client supports a
     `--secure-auth' option that is analogous to `secure_auth', but
     from the client side. It can be used to prevent connections to
     less secure accounts that use pre-4.1 password hashing. This
     option is disabled by default before MySQL 5.6.7, enabled
     thereafter.

* Compatibility Issues Related to Hashing Methods *

The widening of the `Password' column in MySQL 4.1 from 16 bytes to 41
bytes affects installation or upgrade operations as follows:

   * If you perform a new installation of MySQL, the `Password' column
     is made 41 bytes long automatically.

   * Upgrades from MySQL 4.1 or later to current versions of MySQL
     should not give rise to any issues in regard to the `Password'
     column because both versions use the same column length and
     password hashing method.

   * For upgrades from a pre-4.1 release to 4.1 or later, you must
     upgrade the system tables after upgrading. (See *Note
     mysql-upgrade::.)

The 4.1 hashing method is understood only by MySQL 4.1 (and newer)
servers and clients, which can result in some compatibility problems. A
4.1 or newer client can connect to a pre-4.1 server, because the client
understands both the pre-4.1 and 4.1 password hashing methods. However,
a pre-4.1 client that attempts to connect to a 4.1 or newer server may
run into difficulties. For example, a 4.0 *Note `mysql': mysql. client
may fail with the following error message:

     shell> mysql -h localhost -u root
     Client does not support authentication protocol requested
     by server; consider upgrading MySQL client

This phenomenon also occurs for attempts to use the older PHP `mysql'
extension after upgrading to MySQL 4.1 or newer. (See *Note
apis-php-problems::.)

The following discussion describes the differences between the pre-4.1
and 4.1 hashing methods, and what you should do if you upgrade your
server but need to maintain backward compatibility with pre-4.1
clients. (However, permitting connections by old clients is not
recommended and should be avoided if possible.)  Additional information
can be found in *Note old-client::. This information is of particular
importance to PHP programmers migrating MySQL databases from versions
older than 4.1 to 4.1 or higher.

The differences between short and long password hashes are relevant
both for how the server uses passwords during authentication and for
how it generates password hashes for connected clients that perform
password-changing operations.

The way in which the server uses password hashes during authentication
is affected by the width of the `Password' column:

   * If the column is short, only short-hash authentication is used.

   * If the column is long, it can hold either short or long hashes,
     and the server can use either format:

        * Pre-4.1 clients can connect, but because they know only about
          the pre-4.1 hashing method, they can authenticate only using
          accounts that have short hashes.

        * 4.1 and later clients can authenticate using accounts that
          have short or long hashes.

Even for short-hash accounts, the authentication process is actually a
bit more secure for 4.1 and later clients than for older clients. In
terms of security, the gradient from least to most secure is:

   * Pre-4.1 client authenticating with short password hash

   * 4.1 or later client authenticating with short password hash

   * 4.1 or later client authenticating with long password hash

The way in which the server generates password hashes for connected
clients is affected by the width of the `Password' column and by the
`old_passwords' system variable.  A 4.1 or later server generates long
hashes only if certain conditions are met: The `Password' column must
be wide enough to hold long values and `old_passwords' must not be set
to 1.

Those conditions apply as follows:

   * The `Password' column must be wide enough to hold long hashes (41
     bytes). If the column has not been updated and still has the
     pre-4.1 width of 16 bytes, the server notices that long hashes
     cannot fit into it and generates only short hashes when a client
     performs password-changing operations using the `PASSWORD()'
     function or a password-generating statement. This is the behavior
     that occurs if you have upgraded from a version of MySQL older
     than 4.1 to 4.1 or later but have not yet run the *Note
     `mysql_upgrade': mysql-upgrade. program to widen the `Password'
     column.

   * If the `Password' column is wide, it can store either short or
     long password hashes. In this case, the `PASSWORD()' function and
     password-generating statements generate long hashes unless the
     server was started with the `old_passwords' system variable set to
     1 to force the server to generate short password hashes instead.

The purpose of the `old_passwords' system variable is to permit
backward compatibility with pre-4.1 clients under circumstances where
the server would otherwise generate long password hashes. The option
does not affect authentication (4.1 and later clients can still use
accounts that have long password hashes), but it does prevent creation
of a long password hash in the `user' table as the result of a
password-changing operation. Were that permitted to occur, the account
could no longer be used by pre-4.1 clients. With `old_passwords'
disabled, the following undesirable scenario is possible:

   * An old pre-4.1 client connects to an account that has a short
     password hash.

   * The client changes its own password. With `old_passwords' disabled,
     this results in the account having a long password hash.

   * The next time the old client attempts to connect to the account,
     it cannot, because the account has a long password hash that
     requires the 4.1 hashing method during authentication. (Once an
     account has a long password hash in the user table, only 4.1 and
     later clients can authenticate for it because pre-4.1 clients do
     not understand long hashes.)

This scenario illustrates that, if you must support older pre-4.1
clients, it is problematic to run a 4.1 or newer server without
`old_passwords' set to 1.  By running the server with `old_passwords=1',
password-changing operations do not generate long password hashes and
thus do not cause accounts to become inaccessible to older clients.
(Those clients cannot inadvertently lock themselves out by changing
their password and ending up with a long password hash.)

The downside of `old_passwords=1' is that any passwords created or
changed use short hashes, even for 4.1 or later clients. Thus, you lose
the additional security provided by long password hashes. To create an
account that has a long hash (for example, for use by 4.1 clients) or
to change an existing account to use a long password hash, an
administrator can set the session value of `old_passwords' set to 0
while leaving the global value set to 1:


     mysql> SET @@session.old_passwords = 0;
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT @@session.old_passwords, @@global.old_passwords;
     +-------------------------+------------------------+
     | @@session.old_passwords | @@global.old_passwords |
     +-------------------------+------------------------+
     |                       0 |                      1 |
     +-------------------------+------------------------+
     1 row in set (0.00 sec)

     mysql> CREATE USER 'newuser'@'localhost' IDENTIFIED BY 'newpass';
     Query OK, 0 rows affected (0.03 sec)

     mysql> SET PASSWORD FOR 'existinguser'@'localhost' = PASSWORD('existingpass');
     Query OK, 0 rows affected (0.00 sec)

The following scenarios are possible in MySQL 4.1 or later. The factors
are whether the `Password' column is short or long, and, if long,
whether the server is started with `old_passwords' enabled or disabled.

*Scenario 1:* Short `Password' column in user table:

   * Only short hashes can be stored in the `Password' column.

   * The server uses only short hashes during client authentication.

   * For connected clients, password hash-generating operations
     involving the `PASSWORD()' function or password-generating
     statements use short hashes exclusively. Any change to an
     account's password results in that account having a short password
     hash.

   * The value of `old_passwords' is irrelevant because with a short
     `Password' column, the server generates only short password hashes
     anyway.

This scenario occurs when a pre-4.1 MySQL installation has been
upgraded to 4.1 or later but *Note `mysql_upgrade': mysql-upgrade.  has
not been run to upgrade the system tables in the `mysql' database.
(This is not a recommended configuration because it does not permit use
of more secure 4.1 password hashing.)

*Scenario 2:* Long `Password' column; server started with
`old_passwords=1':

   * Short or long hashes can be stored in the `Password' column.

   * 4.1 and later clients can authenticate for accounts that have
     short or long hashes.

   * Pre-4.1 clients can authenticate only for accounts that have short
     hashes.

   * For connected clients, password hash-generating operations
     involving the `PASSWORD()' function or password-generating
     statements use short hashes exclusively. Any change to an
     account's password results in that account having a short password
     hash.

In this scenario, newly created accounts have short password hashes
because `old_passwords=1' prevents generation of long hashes. Also, if
you create an account with a long hash before setting `old_passwords'
to 1, changing the account's password while `old_passwords=1' results
in the account being given a short password, causing it to lose the
security benefits of a longer hash.

To create a new account that has a long password hash, or to change the
password of any existing account to use a long hash, first set the
session value of `old_passwords' set to 0 while leaving the global
value set to 1, as described previously.

In this scenario, the server has an up to date `Password' column, but
is running with the default password hashing method set to generate
pre-4.1 hash values. This is not a recommended configuration but may be
useful during a transitional period in which pre-4.1 clients and
passwords are upgraded to 4.1 or later. When that has been done, it is
preferable to run the server with `old_passwords=0' and `secure_auth=1'.

*Scenario 3:* Long `Password' column; server started with
`old_passwords=0':

   * Short or long hashes can be stored in the `Password' column.

   * 4.1 and later clients can authenticate using accounts that have
     short or long hashes.

   * Pre-4.1 clients can authenticate only using accounts that have
     short hashes.

   * For connected clients, password hash-generating operations
     involving the `PASSWORD()' function or password-generating
     statements use long hashes exclusively. A change to an account's
     password results in that account having a long password hash.

As indicated earlier, a danger in this scenario is that it is possible
for accounts that have a short password hash to become inaccessible to
pre-4.1 clients. A change to such an account's password made using the
`PASSWORD()' function or a password-generating statement results in the
account being given a long password hash. From that point on, no
pre-4.1 client can connect to the server using that account. The client
must upgrade to 4.1 or later.

If this is a problem, you can change a password in a special way. For
example, normally you use *Note `SET PASSWORD': set-password. as
follows to change an account password:

     SET PASSWORD FOR 'SOME_USER'@'SOME_HOST' = PASSWORD('mypass');

To change the password but create a short hash, use the
`OLD_PASSWORD()' function instead:

     SET PASSWORD FOR 'SOME_USER'@'SOME_HOST' = OLD_PASSWORD('mypass');

`OLD_PASSWORD()' is useful for situations in which you explicitly want
to generate a short hash.

The disadvantages for each of the preceding scenarios may be summarized
as follows:

In scenario 1, you cannot take advantage of longer hashes that provide
more secure authentication.

In scenario 2, `old_passwords=1' prevents accounts with short hashes
from becoming inaccessible, but password-changing operations cause
accounts with long hashes to revert to short hashes unless you take
care to change the session value of `old_passwords' to 0 first.

In scenario 3, accounts with short hashes become inaccessible to
pre-4.1 clients if you change their passwords without explicitly using
`OLD_PASSWORD()'.

The best way to avoid compatibility problems related to short password
hashes is to not use them:

   * Upgrade all client programs to MySQL 4.1 or later.

   * Run the server with `old_passwords=0'.

   * Reset the password for any account with a short password hash to
     use a long password hash.

   * For additional security, run the server with `secure_auth=1'.


File: manual.info,  Node: application-password-use,  Prev: password-hashing,  Up: password-security

6.1.2.5 Implications of Password Hashing Changes in MySQL 4.1 for Application Programs
......................................................................................

An upgrade to MySQL version 4.1 or later can cause compatibility issues
for applications that use `PASSWORD()' to generate passwords for their
own purposes. Applications really should not do this, because
`PASSWORD()' should be used only to manage passwords for MySQL
accounts. But some applications use `PASSWORD()' for their own purposes
anyway.

If you upgrade to 4.1 or later from a pre-4.1 version of MySQL and run
the server under conditions where it generates long password hashes, an
application using `PASSWORD()' for its own passwords breaks. The
recommended course of action in such cases is to modify the application
to use another function, such as `SHA2()', `SHA1()', or `MD5()', to
produce hashed values.  If that is not possible, you can use the
`OLD_PASSWORD()' function, which is provided for generate short hashes
in the old format. However, you should note that `OLD_PASSWORD()' may
one day no longer be supported.

If the server is running with `old_passwords=1', it generates short
hashes and `OLD_PASSWORD()' is is equivalent to `PASSWORD()'.

PHP programmers migrating their MySQL databases from version 4.0 or
lower to version 4.1 or higher should see *Note apis-php::.


File: manual.info,  Node: security-against-attack,  Next: security-options,  Prev: password-security,  Up: general-security-issues

6.1.3 Making MySQL Secure Against Attackers
-------------------------------------------

When you connect to a MySQL server, you should use a password. The
password is not transmitted in clear text over the connection.
Password handling during the client connection sequence was upgraded in
MySQL 4.1.1 to be very secure. If you are still using pre-4.1.1-style
passwords, the encryption algorithm is not as strong as the newer
algorithm. With some effort, a clever attacker who can sniff the
traffic between the client and the server can crack the password. (See
*Note password-hashing::, for a discussion of the different password
handling methods.)

All other information is transferred as text, and can be read by anyone
who is able to watch the connection. If the connection between the
client and the server goes through an untrusted network, and you are
concerned about this, you can use the compressed protocol to make
traffic much more difficult to decipher. You can also use MySQL's
internal SSL support to make the connection even more secure. See *Note
ssl-connections::. Alternatively, use SSH to get an encrypted TCP/IP
connection between a MySQL server and a MySQL client. You can find an
Open Source SSH client at `http://www.openssh.org/', and a commercial
SSH client at `http://www.ssh.com/'.

To make a MySQL system secure, you should strongly consider the
following suggestions:

   * Require all MySQL accounts to have a password. A client program
     does not necessarily know the identity of the person running it.
     It is common for client/server applications that the user can
     specify any user name to the client program. For example, anyone
     can use the *Note `mysql': mysql. program to connect as any other
     person simply by invoking it as `mysql -u OTHER_USER DB_NAME' if
     OTHER_USER has no password. If all accounts have a password,
     connecting using another user's account becomes much more
     difficult.

     For a discussion of methods for setting passwords, see *Note
     assigning-passwords::.

   * Make sure that the only Unix user account with read or write
     privileges in the database directories is the account that is used
     for running *Note `mysqld': mysqld.

   * Never run the MySQL server as the Unix `root' user. This is
     extremely dangerous, because any user with the `FILE' privilege is
     able to cause the server to create files as `root' (for example,
     `~root/.bashrc'). To prevent this, *Note `mysqld': mysqld. refuses
     to run as `root' unless that is specified explicitly using the
     `--user=root' option.

     *Note `mysqld': mysqld. can (and should) be run as an ordinary,
     unprivileged user instead. You can create a separate Unix account
     named `mysql' to make everything even more secure. Use this
     account only for administering MySQL. To start *Note `mysqld':
     mysqld. as a different Unix user, add a `user' option that
     specifies the user name in the `[mysqld]' group of the `my.cnf'
     option file where you specify server options. For example:

          [mysqld]
          user=mysql

     This causes the server to start as the designated user whether you
     start it manually or by using *Note `mysqld_safe': mysqld-safe. or
     *Note `mysql.server': mysql-server. For more details, see *Note
     changing-mysql-user::.

     Running *Note `mysqld': mysqld. as a Unix user other than `root'
     does not mean that you need to change the `root' user name in the
     `user' table. _User names for MySQL accounts have nothing to do
     with user names for Unix accounts_.

   * Do not grant the `FILE' privilege to nonadministrative users. Any
     user that has this privilege can write a file anywhere in the file
     system with the privileges of the *Note `mysqld': mysqld. daemon.
     This includes the server's data directory containing the files that
     implement the privilege tables. To make `FILE'-privilege
     operations a bit safer, files generated with *Note `SELECT ...
     INTO OUTFILE': select-into. do not overwrite existing files and are
     writable by everyone.

     The `FILE' privilege may also be used to read any file that is
     world-readable or accessible to the Unix user that the server runs
     as. With this privilege, you can read any file into a database
     table. This could be abused, for example, by using *Note `LOAD
     DATA': load-data. to load `/etc/passwd' into a table, which then
     can be displayed with *Note `SELECT': select.

     To limit the location in which files can be read and written, set
     the `secure_file_priv' system to a specific directory. See *Note
     server-system-variables::.

   * Do not grant the `PROCESS' or `SUPER' privilege to
     nonadministrative users. The output of *Note `mysqladmin
     processlist': mysqladmin. and *Note `SHOW PROCESSLIST':
     show-processlist. shows the text of any statements currently being
     executed, so any user who is permitted to see the server process
     list might be able to see statements issued by other users such as
     `UPDATE user SET password=PASSWORD('not_secure')'.

     *Note `mysqld': mysqld. reserves an extra connection for users who
     have the `SUPER' privilege, so that a MySQL `root' user can log in
     and check server activity even if all normal connections are in
     use.

     The `SUPER' privilege can be used to terminate client connections,
     change server operation by changing the value of system variables,
     and control replication servers.

   * Do not permit the use of symlinks to tables. (This capability can
     be disabled with the `--skip-symbolic-links' option.) This is
     especially important if you run *Note `mysqld': mysqld. as `root',
     because anyone that has write access to the server's data directory
     then could delete any file in the system! See *Note
     symbolic-links-to-tables::.

   * Stored programs and views should be written using the security
     guidelines discussed in *Note stored-programs-security::.

   * If you do not trust your DNS, you should use IP addresses rather
     than host names in the grant tables. In any case, you should be
     very careful about creating grant table entries using host name
     values that contain wildcards.

   * If you want to restrict the number of connections permitted to a
     single account, you can do so by setting the
     `max_user_connections' variable in *Note `mysqld': mysqld. The
     *Note `GRANT': grant. statement also supports resource control
     options for limiting the extent of server use permitted to an
     account. See *Note grant::.

   * If the plugin directory is writable by the server, it may be
     possible for a user to write executable code to a file in the
     directory using *Note `SELECT ... INTO DUMPFILE': select. This can
     be prevented by making `plugin_dir' read only to the server or by
     setting `--secure-file-priv' to a directory where *Note `SELECT':
     select. writes can be made safely.


File: manual.info,  Node: security-options,  Next: changing-mysql-user,  Prev: security-against-attack,  Up: general-security-issues

6.1.4 Security-Related `mysqld' Options and Variables
-----------------------------------------------------

The following table shows *Note `mysqld': mysqld. options and system
variables that affect security. For descriptions of each of these, see
*Note server-options::, and *Note server-system-variables::.

*Security Option/Variable Summary*

Name           Cmd-Line    Option file System Var  Status Var  Var Scope   Dynamic
allow-suspicious-udfsYes         Yes                                             
automatic_sp_privileges                        Yes                     Global      Yes
chroot         Yes         Yes                                             
des-key-file   Yes         Yes                                             
local_infile                           Yes                     Global      Yes
old_passwords                          Yes                     Both        Yes
safe-show-databaseYes         Yes         Yes                     Global      Yes
safe-user-createYes         Yes                                             
secure-auth    Yes         Yes                                 Global      Yes
- _Variable_:                          Yes                     Global      Yes
secure_auth                                                                
secure-file-privYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
secure_file_priv                                                            
skip-grant-tablesYes         Yes                                             
skip-name-resolveYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
skip_name_resolve                                                            
skip-networkingYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
skip_networking                                                            
skip-show-databaseYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
skip_show_database                                                            


File: manual.info,  Node: changing-mysql-user,  Next: load-data-local,  Prev: security-options,  Up: general-security-issues

6.1.5 How to Run MySQL as a Normal User
---------------------------------------

On Windows, you can run the server as a Windows service using a normal
user account.

On Unix, the MySQL server *Note `mysqld': mysqld. can be started and
run by any user. However, you should avoid running the server as the
Unix `root' user for security reasons. To change *Note `mysqld':
mysqld. to run as a normal unprivileged Unix user USER_NAME, you must
do the following:

  1. Stop the server if it is running (use *Note `mysqladmin shutdown':
     mysqladmin.).

  2. Change the database directories and files so that USER_NAME has
     privileges to read and write files in them (you might need to do
     this as the Unix `root' user):

          shell> chown -R USER_NAME /PATH/TO/MYSQL/DATADIR

     If you do not do this, the server will not be able to access
     databases or tables when it runs as USER_NAME.

     If directories or files within the MySQL data directory are
     symbolic links, `chown -R' might not follow symbolic links for
     you. If it does not, you will also need to follow those links and
     change the directories and files they point to.

  3. Start the server as user USER_NAME.  Another alternative is to
     start *Note `mysqld': mysqld. as the Unix `root' user and use the
     `--user=USER_NAME' option. *Note `mysqld': mysqld. starts up, then
     switches to run as the Unix user USER_NAME before accepting any
     connections.

  4. To start the server as the given user automatically at system
     startup time, specify the user name by adding a `user' option to
     the `[mysqld]' group of the `/etc/my.cnf' option file or the
     `my.cnf' option file in the server's data directory. For example:

          [mysqld]
          user=USER_NAME

If your Unix machine itself is not secured, you should assign passwords
to the MySQL `root' accounts in the grant tables. Otherwise, any user
with a login account on that machine can run the *Note `mysql': mysql.
client with a `--user=root' option and perform any operation. (It is a
good idea to assign passwords to MySQL accounts in any case, but
especially so when other login accounts exist on the server host.) See
*Note default-privileges::.


File: manual.info,  Node: load-data-local,  Next: secure-client-programming,  Prev: changing-mysql-user,  Up: general-security-issues

6.1.6 Security Issues with `LOAD DATA LOCAL'
--------------------------------------------

The *Note `LOAD DATA': load-data. statement can load a file that is
located on the server host, or it can load a file that is located on
the client host when the `LOCAL' keyword is specified.

There are two potential security issues with supporting the `LOCAL'
version of *Note `LOAD DATA': load-data. statements:

   * The transfer of the file from the client host to the server host
     is initiated by the MySQL server. In theory, a patched server
     could be built that would tell the client program to transfer a
     file of the server's choosing rather than the file named by the
     client in the *Note `LOAD DATA': load-data. statement. Such a
     server could access any file on the client host to which the
     client user has read access.

   * In a Web environment where the clients are connecting from a Web
     server, a user could use *Note `LOAD DATA LOCAL': load-data. to
     read any files that the Web server process has read access to
     (assuming that a user could run any command against the SQL
     server). In this environment, the client with respect to the MySQL
     server actually is the Web server, not the remote program being
     run by the user who connects to the Web server.

To deal with these problems, we changed how *Note `LOAD DATA LOCAL':
load-data. is handled as of MySQL 3.23.49 and MySQL 4.0.2 (4.0.13 on
Windows):

   * By default, all MySQL clients and libraries in binary
     distributions are compiled with the `-DENABLED_LOCAL_INFILE=1'
     option, to be compatible with MySQL 3.23.48 and before.

   * If you build MySQL from source but do not invoke `CMake' with the
     `-DENABLED_LOCAL_INFILE=1' option, *Note `LOAD DATA LOCAL':
     load-data. cannot be used by any client unless it is written
     explicitly to invoke *Note `mysql_options(...
     MYSQL_OPT_LOCAL_INFILE, 0)': mysql-options. See *Note
     mysql-options::.

   * You can disable all *Note `LOAD DATA LOCAL': load-data. statements
     from the server side by starting *Note `mysqld': mysqld. with the
     `--local-infile=0' option.

   * For the *Note `mysql': mysql. command-line client, enable *Note
     `LOAD DATA LOCAL': load-data. by specifying the
     `--local-infile[=1]' option, or disable it with the
     `--local-infile=0' option. For *Note `mysqlimport': mysqlimport,
     local data file loading is off by default; enable it with the
     `--local' or `-L' option. In any case, successful use of a local
     load operation requires that the server permits it.

   * If you use *Note `LOAD DATA LOCAL': load-data. in Perl scripts or
     other programs that read the `[client]' group from option files,
     you can add the `local-infile=1' option to that group. However, to
     keep this from causing problems for programs that do not understand
     `local-infile', specify it using the `loose-' prefix:

          [client]
          loose-local-infile=1

   * If *Note `LOAD DATA LOCAL': load-data. is disabled, either in the
     server or the client, a client that attempts to issue such a
     statement receives the following error message:

          ERROR 1148: The used command is not allowed with this MySQL version


File: manual.info,  Node: secure-client-programming,  Prev: load-data-local,  Up: general-security-issues

6.1.7 Client Programming Security Guidelines
--------------------------------------------

Applications that access MySQL should not trust any data entered by
users, who can try to trick your code by entering special or escaped
character sequences in Web forms, URLs, or whatever application you
have built. Be sure that your application remains secure if a user
enters something like ``; DROP DATABASE mysql;''. This is an extreme
example, but large security leaks and data loss might occur as a result
of hackers using similar techniques, if you do not prepare for them.

A common mistake is to protect only string data values. Remember to
check numeric data as well. If an application generates a query such as
`SELECT * FROM table WHERE ID=234' when a user enters the value `234',
the user can enter the value `234 OR 1=1' to cause the application to
generate the query `SELECT * FROM table WHERE ID=234 OR 1=1'. As a
result, the server retrieves every row in the table. This exposes every
row and causes excessive server load.  The simplest way to protect from
this type of attack is to use single quotation marks around the numeric
constants: `SELECT * FROM table WHERE ID='234''. If the user enters
extra information, it all becomes part of the string. In a numeric
context, MySQL automatically converts this string to a number and
strips any trailing nonnumeric characters from it.

Sometimes people think that if a database contains only publicly
available data, it need not be protected. This is incorrect. Even if it
is permissible to display any row in the database, you should still
protect against denial of service attacks (for example, those that are
based on the technique in the preceding paragraph that causes the
server to waste resources). Otherwise, your server becomes unresponsive
to legitimate users.

Checklist:

   * Enable strict SQL mode to tell the server to be more restrictive
     of what data values it accepts. See *Note server-sql-mode::.

   * Try to enter single and double quotation marks (``''' and ``"'')
     in all of your Web forms.  If you get any kind of MySQL error,
     investigate the problem right away.

   * Try to modify dynamic URLs by adding `%22' (``"''), `%23' (``#''),
     and `%27' (``''') to them.

   * Try to modify data types in dynamic URLs from numeric to character
     types using the characters shown in the previous examples. Your
     application should be safe against these and similar attacks.

   * Try to enter characters, spaces, and special symbols rather than
     numbers in numeric fields. Your application should remove them
     before passing them to MySQL or else generate an error.  Passing
     unchecked values to MySQL is very dangerous!

   * Check the size of data before passing it to MySQL.

   * Have your application connect to the database using a user name
     different from the one you use for administrative purposes. Do not
     give your applications any access privileges they do not need.

Many application programming interfaces provide a means of escaping
special characters in data values. Properly used, this prevents
application users from entering values that cause the application to
generate statements that have a different effect than you intend:

   * MySQL C API: Use the *Note `mysql_real_escape_string()':
     mysql-real-escape-string. API call.

   * MySQL++: Use the `escape' and `quote' modifiers for query streams.

   * PHP: Use either the `mysqli' or `pdo_mysql' extensions, and not
     the older `ext/mysql' extension. The preferred API's support the
     improved MySQL authentication protocol and passwords, as well as
     prepared statements with placeholders.  See also *Note
     apis-php-mysqlinfo.api.choosing::.

     If the older `ext/mysql' extension must be used, then for escaping
     use the *Note `mysql_real_escape_string()':
     mysql-real-escape-string.  function and not *Note
     `mysql_escape_string()': mysql-escape-string. or `addslashes()'
     because only *Note `mysql_real_escape_string()':
     mysql-real-escape-string. is character set-aware; the other
     functions can be `bypassed' when using (invalid) multi-byte
     character sets.

   * Perl DBI: Use placeholders or the `quote()' method.

   * Ruby DBI: Use placeholders or the `quote()' method.

   * Java JDBC: Use a `PreparedStatement' object and placeholders.

Other programming interfaces might have similar capabilities.


File: manual.info,  Node: privilege-system,  Next: user-account-management,  Prev: general-security-issues,  Up: security

6.2 The MySQL Access Privilege System
=====================================

* Menu:

* privileges-provided::          Privileges Provided by MySQL
* grant-table-structure::        Privilege System Grant Tables
* account-names::                Specifying Account Names
* connection-access::            Access Control, Stage 1: Connection Verification
* request-access::               Access Control, Stage 2: Request Verification
* privilege-changes::            When Privilege Changes Take Effect
* access-denied::                Causes of Access-Denied Errors

The primary function of the MySQL privilege system is to authenticate a
user who connects from a given host and to associate that user with
privileges on a database such as *Note `SELECT': select, *Note
`INSERT': insert, *Note `UPDATE': update, and *Note `DELETE': delete.
Additional functionality includes the ability to have anonymous users
and to grant privileges for MySQL-specific functions such as *Note
`LOAD DATA INFILE': load-data. and administrative operations.

There are some things that you cannot do with the MySQL privilege
system:

   * You cannot explicitly specify that a given user should be denied
     access. That is, you cannot explicitly match a user and then
     refuse the connection.

   * You cannot specify that a user has privileges to create or drop
     tables in a database but not to create or drop the database itself.

   * A password applies globally to an account. You cannot associate a
     password with a specific object such as a database, table, or
     routine.

The user interface to the MySQL privilege system consists of SQL
statements such as *Note `CREATE USER': create-user, *Note `GRANT':
grant, and *Note `REVOKE': revoke. See *Note account-management-sql::.

Internally, the server stores privilege information in the grant tables
of the `mysql' database (that is, in the database named `mysql'). The
MySQL server reads the contents of these tables into memory when it
starts and bases access-control decisions on the in-memory copies of
the grant tables.

The MySQL privilege system ensures that all users may perform only the
operations permitted to them. As a user, when you connect to a MySQL
server, your identity is determined by _the host from which you
connect_ and _the user name you specify_. When you issue requests after
connecting, the system grants privileges according to your identity and
_what you want to do_.

MySQL considers both your host name and user name in identifying you
because there is no reason to assume that a given user name belongs to
the same person on all hosts. For example, the user `joe' who connects
from `office.example.com' need not be the same person as the user `joe'
who connects from `home.example.com'. MySQL handles this by enabling
you to distinguish users on different hosts that happen to have the
same name: You can grant one set of privileges for connections by `joe'
from `office.example.com', and a different set of privileges for
connections by `joe' from `home.example.com'. To see what privileges a
given account has, use the *Note `SHOW GRANTS': show-grants. statement.
For example:

     SHOW GRANTS FOR 'joe'@'office.example.com';
     SHOW GRANTS FOR 'joe'@'home.example.com';

MySQL access control involves two stages when you run a client program
that connects to the server:

*Stage 1:* The server accepts or rejects the connection based on your
identity and whether you can verify your identity by supplying the
correct password.

*Stage 2:* Assuming that you can connect, the server checks each
statement you issue to determine whether you have sufficient privileges
to perform it. For example, if you try to select rows from a table in a
database or drop a table from the database, the server verifies that
you have the `SELECT' privilege for the table or the `DROP' privilege
for the database.

For a more detailed description of what happens during each stage, see
*Note connection-access::, and *Note request-access::.

If your privileges are changed (either by yourself or someone else)
while you are connected, those changes do not necessarily take effect
immediately for the next statement that you issue. For details about
the conditions under which the server reloads the grant tables, see
*Note privilege-changes::.

For general security-related advice, see *Note
general-security-issues::. For help in diagnosing privilege-related
problems, see *Note access-denied::.


File: manual.info,  Node: privileges-provided,  Next: grant-table-structure,  Prev: privilege-system,  Up: privilege-system

6.2.1 Privileges Provided by MySQL
----------------------------------

MySQL provides privileges that apply in different contexts and at
different levels of operation:

   * Administrative privileges enable users to manage operation of the
     MySQL server. These privileges are global because they are not
     specific to a particular database.

   * Database privileges apply to a database and to all objects within
     it. These privileges can be granted for specific databases, or
     globally so that they apply to all databases.

   * Privileges for database objects such as tables, indexes, views,
     and stored routines can be granted for specific objects within a
     database, for all objects of a given type within a database (for
     example, all tables in a database), or globally for all objects of
     a given type in all databases).

Information about account privileges is stored in the `user', `db',
`host', `tables_priv', `columns_priv', and `procs_priv' tables in the
`mysql' database (see *Note grant-table-structure::). The MySQL server
reads the contents of these tables into memory when it starts and
reloads them under the circumstances indicated in *Note
privilege-changes::. Access-control decisions are based on the
in-memory copies of the grant tables.

Some releases of MySQL introduce changes to the structure of the grant
tables to add new access privileges or features. Whenever you update to
a new version of MySQL, you should update your grant tables to make
sure that they have the current structure so that you can take
advantage of any new capabilities. See *Note mysql-upgrade::.

The following table shows the privilege names used at the SQL level in
the *Note `GRANT': grant. and *Note `REVOKE': revoke. statements, along
with the column name associated with each privilege in the grant tables
and the context in which the privilege applies.

*Permissible Privileges for `GRANT' and `REVOKE'*

Privilege              Column                   Context
`CREATE'               `Create_priv'            databases, tables, or
                                                indexes
`DROP'                 `Drop_priv'              databases, tables, or views
`GRANT OPTION'         `Grant_priv'             databases, tables, or
                                                stored routines
`LOCK TABLES'          `Lock_tables_priv'       databases
`REFERENCES'           `References_priv'        databases or tables
`EVENT'                `Event_priv'             databases
`ALTER'                `Alter_priv'             tables
`DELETE'               `Delete_priv'            tables
`INDEX'                `Index_priv'             tables
`INSERT'               `Insert_priv'            tables or columns
`SELECT'               `Select_priv'            tables or columns
`UPDATE'               `Update_priv'            tables or columns
`CREATE TEMPORARY      `Create_tmp_table_priv'  tables
TABLES'                                         
`TRIGGER'              `Trigger_priv'           tables
`CREATE VIEW'          `Create_view_priv'       views
`SHOW VIEW'            `Show_view_priv'         views
`ALTER ROUTINE'        `Alter_routine_priv'     stored routines
`CREATE ROUTINE'       `Create_routine_priv'    stored routines
`EXECUTE'              `Execute_priv'           stored routines
`FILE'                 `File_priv'              file access on server host
`CREATE TABLESPACE'    `Create_tablespace_priv' server administration
`CREATE USER'          `Create_user_priv'       server administration
`PROCESS'              `Process_priv'           server administration
`PROXY'                see `proxies_priv' table server administration
`RELOAD'               `Reload_priv'            server administration
`REPLICATION CLIENT'   `Repl_client_priv'       server administration
`REPLICATION SLAVE'    `Repl_slave_priv'        server administration
`SHOW DATABASES'       `Show_db_priv'           server administration
`SHUTDOWN'             `Shutdown_priv'          server administration
`SUPER'                `Super_priv'             server administration
`ALL [PRIVILEGES]'                              server administration
`USAGE'                                         server administration

The following list provides a general description of each privilege
available in MySQL. Particular SQL statements might have more specific
privilege requirements than indicated here. If so, the description for
the statement in question provides the details.

   *  The `ALL' or `ALL PRIVILEGES' privilege specifier is shorthand.
     It stands for `all privileges available at a given privilege level'
     (except `GRANT OPTION'). For example, granting `ALL' at the global
     or table level grants all global privileges or all table-level
     privileges.

   *  The `ALTER' privilege enables use of *Note `ALTER TABLE':
     alter-table. to change the structure of tables. *Note `ALTER
     TABLE': alter-table. also requires the `CREATE' and `INSERT'
     privileges. Renaming a table requires `ALTER' and `DROP' on the
     old table, `ALTER', `CREATE', and `INSERT' on the new table.

   *  The `ALTER ROUTINE' privilege is needed to alter or drop stored
     routines (procedures and functions).

   *  The `CREATE' privilege enables creation of new databases and
     tables.

   *  The `CREATE ROUTINE' privilege is needed to create stored
     routines (procedures and functions).

   *  The `CREATE TABLESPACE' privilege is needed to create, alter, or
     drop tablespaces and log file groups.

   *  The `CREATE TEMPORARY TABLES' privilege enables the creation of
     temporary tables using the *Note `CREATE TEMPORARY TABLE':
     create-table. statement.

     However, other operations on a temporary table, such as *Note
     `INSERT': insert, *Note `UPDATE': update, or *Note `SELECT':
     select, require additional privileges for those operations for the
     database containing the temporary table, or for the nontemporary
     table of the same name.

     To keep privileges for temporary and nontemporary tables separate,
     a common workaround for this situation is to create a database
     dedicated to the use of temporary tables. Then for that database,
     a user can be granted the `CREATE TEMPORARY TABLES' privilege,
     along with any other privileges required for temporary table
     operations done by that user.

   *  The `CREATE USER' privilege enables use of *Note `CREATE USER':
     create-user, *Note `DROP USER': drop-user, *Note `RENAME USER':
     rename-user, and *Note `REVOKE ALL PRIVILEGES': revoke.

   *  The `CREATE VIEW' privilege enables use of *Note `CREATE VIEW':
     create-view.

   *  The `DELETE' privilege enables rows to be deleted from tables in
     a database.

   *  The `DROP' privilege enables you to drop (remove) existing
     databases, tables, and views. The `DROP' privilege is required in
     order to use the statement `ALTER TABLE ... DROP PARTITION' on a
     partitioned table. The `DROP' privilege is also required for *Note
     `TRUNCATE TABLE': truncate-table.  _If you grant the `DROP'
     privilege for the `mysql' database to a user, that user can drop
     the database in which the MySQL access privileges are stored._

   *  The `EVENT' privilege is required to create, alter, drop, or see
     events for the Event Scheduler.

   *  The `EXECUTE' privilege is required to execute stored routines
     (procedures and functions).

   *  The `FILE' privilege gives you permission to read and write files
     on the server host using the *Note `LOAD DATA INFILE': load-data.
     and *Note `SELECT ... INTO OUTFILE': select-into. statements and
     the `LOAD_FILE()' function. A user who has the `FILE' privilege can
     read any file on the server host that is either world-readable or
     readable by the MySQL server. (This implies the user can read any
     file in any database directory, because the server can access any
     of those files.) The `FILE' privilege also enables the user to
     create new files in any directory where the MySQL server has write
     access. This includes the server's data directory containing the
     files that implement the privilege tables. As a security measure,
     the server will not overwrite existing files.

     To limit the location in which files can be read and written, set
     the `secure_file_priv' system to a specific directory. See *Note
     server-system-variables::.

   *  The `GRANT OPTION' privilege enables you to give to other users
     or remove from other users those privileges that you yourself
     possess.

   *  The `INDEX' privilege enables you to create or drop (remove)
     indexes.  `INDEX' applies to existing tables. If you have the
     `CREATE' privilege for a table, you can include index definitions
     in the *Note `CREATE TABLE': create-table. statement.

   *  The `INSERT' privilege enables rows to be inserted into tables in
     a database.  `INSERT' is also required for the *Note `ANALYZE
     TABLE': analyze-table, *Note `OPTIMIZE TABLE': optimize-table, and
     *Note `REPAIR TABLE': repair-table. table-maintenance statements.

   *  The `LOCK TABLES' privilege enables the use of explicit *Note
     `LOCK TABLES': lock-tables. statements to lock tables for which
     you have the `SELECT' privilege. This includes the use of write
     locks, which prevents other sessions from reading the locked table.

   *  The `PROCESS' privilege pertains to display of information about
     the threads executing within the server (that is, information
     about the statements being executed by sessions). The privilege
     enables use of *Note `SHOW PROCESSLIST': show-processlist. or
     *Note `mysqladmin processlist': mysqladmin. to see threads
     belonging to other accounts; you can always see your own threads.

   *  The `PROXY' privilege enables a user to impersonate or become
     known as another user. See *Note proxy-users::. This privilege was
     added in MySQL 5.5.7.

   *  The `REFERENCES' privilege currently is unused.

   *  The `RELOAD' privilege enables use of the *Note `FLUSH': flush.
     statement. It also enables *Note `mysqladmin': mysqladmin.
     commands that are equivalent to *Note `FLUSH': flush. operations:
     `flush-hosts', `flush-logs', `flush-privileges', `flush-status',
     `flush-tables', `flush-threads', `refresh', and `reload'.

     The `reload' command tells the server to reload the grant tables
     into memory.  `flush-privileges' is a synonym for `reload'. The
     `refresh' command closes and reopens the log files and flushes all
     tables. The other `flush-XXX' commands perform functions similar to
     `refresh', but are more specific and may be preferable in some
     instances. For example, if you want to flush just the log files,
     `flush-logs' is a better choice than `refresh'.

   *  The `REPLICATION CLIENT' privilege enables the use of *Note `SHOW
     MASTER STATUS': show-master-status. and *Note `SHOW SLAVE STATUS':
     show-slave-status. In MySQL 5.5.25 and later, it also enables the
     use of the *Note `SHOW BINARY LOGS': show-binary-logs.  statement.

   *  The `REPLICATION SLAVE' privilege should be granted to accounts
     that are used by slave servers to connect to the current server as
     their master. Without this privilege, the slave cannot request
     updates that have been made to databases on the master server.

   *  The `SELECT' privilege enables you to select rows from tables in
     a database.  *Note `SELECT': select. statements require the
     `SELECT' privilege only if they actually retrieve rows from a
     table. Some *Note `SELECT': select. statements do not access
     tables and can be executed without permission for any database.
     For example, you can use *Note `SELECT': select. as a simple
     calculator to evaluate expressions that make no reference to
     tables:

          SELECT 1+1;
          SELECT PI()*2;

     The `SELECT' privilege is also needed for other statements that
     read column values. For example, `SELECT' is needed for columns
     referenced on the right hand side of COL_NAME=EXPR assignment in
     *Note `UPDATE': update. statements or for columns named in the
     `WHERE' clause of *Note `DELETE': delete. or *Note `UPDATE':
     update. statements.

   *  The `SHOW DATABASES' privilege enables the account to see
     database names by issuing the `SHOW DATABASE' statement. Accounts
     that do not have this privilege see only databases for which they
     have some privileges, and cannot use the statement at all if the
     server was started with the `--skip-show-database' option.  Note
     that _any_ global privilege is a privilege for the database.

   *  The `SHOW VIEW' privilege enables use of *Note `SHOW CREATE
     VIEW': show-create-view.

   *  The `SHUTDOWN' privilege enables use of the *Note `mysqladmin
     shutdown': mysqladmin. command.  There is no corresponding SQL
     statement.

   *  The `SUPER' privilege enables an account to use *Note `CHANGE
     MASTER TO': change-master-to, *Note `KILL': kill. or *Note
     `mysqladmin kill': mysqladmin. to kill threads belonging to other
     accounts (you can always kill your own threads), *Note `PURGE
     BINARY LOGS': purge-binary-logs, configuration changes using *Note
     `SET GLOBAL': set-statement. to modify global system variables, the
     *Note `mysqladmin debug': mysqladmin. command, enabling or
     disabling logging, performing updates even if the `read_only'
     system variable is enabled, starting and stopping replication on
     slave servers, specification of any account in the `DEFINER'
     attribute of stored programs and views, and enables you to connect
     (once) even if the connection limit controlled by the
     `max_connections' system variable is reached.

     To create or alter stored functions if binary logging is enabled,
     you may also need the `SUPER' privilege, as described in *Note
     stored-programs-logging::.

   *  The `TRIGGER' privilege enables trigger operations. You must have
     this privilege for a table to create, drop, or execute triggers
     for that table.

   *  The `UPDATE' privilege enables rows to be updated in tables in a
     database.

   *  The `USAGE' privilege specifier stands for `no privileges.' It is
     used at the global level with *Note `GRANT': grant. to modify
     account attributes such as resource limits or SSL characteristics
     without affecting existing account privileges.

It is a good idea to grant to an account only those privileges that it
needs. You should exercise particular caution in granting the `FILE'
and administrative privileges:

   * The `FILE' privilege can be abused to read into a database table
     any files that the MySQL server can read on the server host. This
     includes all world-readable files and files in the server's data
     directory.  The table can then be accessed using *Note `SELECT':
     select. to transfer its contents to the client host.

   * The `GRANT OPTION' privilege enables users to give their
     privileges to other users. Two users that have different
     privileges and with the `GRANT OPTION' privilege are able to
     combine privileges.

   * The `ALTER' privilege may be used to subvert the privilege system
     by renaming tables.

   * The `SHUTDOWN' privilege can be abused to deny service to other
     users entirely by terminating the server.

   * The `PROCESS' privilege can be used to view the plain text of
     currently executing statements, including statements that set or
     change passwords.

   * The `SUPER' privilege can be used to terminate other sessions or
     change how the server operates.

   * Privileges granted for the `mysql' database itself can be used to
     change passwords and other access privilege information. Passwords
     are stored encrypted, so a malicious user cannot simply read them
     to know the plain text password. However, a user with write access
     to the `user' table `Password' column can change an account's
     password, and then connect to the MySQL server using that account.


File: manual.info,  Node: grant-table-structure,  Next: account-names,  Prev: privileges-provided,  Up: privilege-system

6.2.2 Privilege System Grant Tables
-----------------------------------

Normally, you manipulate the contents of the grant tables in the
`mysql' database indirectly by using statements such as *Note `GRANT':
grant. and *Note `REVOKE': revoke. to set up accounts and control the
privileges available to each one. See *Note account-management-sql::.
The discussion here describes the underlying structure of the grant
tables and how the server uses their contents when interacting with
clients.

These `mysql' database tables contain grant information:

   * `user': Contains user accounts, global privileges, and other
     non-privilege columns.

   * `db': Contains database-level privileges.

   * `host': Obsolete.

   * `tables_priv': Contains table-level privileges.

   * `columns_priv': Contains column-level privileges.

   * `procs_priv': Contains stored procedure and function privileges.

   * `proxies_priv': Contains proxy-user privileges.

Other tables in the `mysql' database do not hold grant information and
are discussed elsewhere:

   * `event': Contains information about Event Scheduler events: See
     *Note events::.

   * `func': Contains information about user-defined functions: See
     *Note adding-functions::.

   * `help_XXX': These tables are used for server-side help: See *Note
     server-side-help-support::.

   * `plugin': Contains information about server plugins: See *Note
     server-plugin-loading::, and *Note plugin-api::.

   * `proc': Contains information about stored procedures and
     functions: See *Note stored-routines::.

   * `servers': Used by the `FEDERATED' storage engine: See *Note
     federated-create-server::.

   * `time_zone_XXX': These tables contain time zone information: See
     *Note time-zone-support::.

   * Tables with `_log' in their name are used for logging: See *Note
     server-logs::.

*Note*:

Modifications to tables in the `mysql' database normally are made by
the server in response to statements such as *Note `CREATE USER':
create-user, *Note `GRANT': grant, or *Note `CREATE PROCEDURE':
create-procedure. Direct modification of these tables using statements
such as *Note `INSERT': insert, *Note `UPDATE': update, or *Note
`DELETE': delete. is not encouraged. The server is free to ignore rows
that become malformed as a result of such modifications.

Each grant table contains scope columns and privilege columns:

   * Scope columns determine the scope of each row (entry) in the
     tables; that is, the context in which the row applies. For
     example, a `user' table row with `Host' and `User' values of
     `'thomas.loc.gov'' and `'bob'' would be used for authenticating
     connections made to the server from the host `thomas.loc.gov' by a
     client that specifies a user name of `bob'. Similarly, a `db'
     table row with `Host', `User', and `Db' column values of
     `'thomas.loc.gov'', `'bob'' and `'reports'' would be used when
     `bob' connects from the host `thomas.loc.gov' to access the
     `reports' database. The `tables_priv' and `columns_priv' tables
     contain scope columns indicating tables or table/column
     combinations to which each row applies. The `procs_priv' scope
     columns indicate the stored routine to which each row applies.

   * Privilege columns indicate which privileges are granted by a table
     row; that is, what operations can be performed. The server
     combines the information in the various grant tables to form a
     complete description of a user's privileges.  *Note
     request-access::, describes the rules that are used to do this.

The server uses the grant tables in the following manner:

   * The `user' table scope columns determine whether to reject or
     permit incoming connections. For permitted connections, any
     privileges granted in the `user' table indicate the user's global
     privileges. Any privilege granted in this table applies to _all_
     databases on the server.

     *Note*:

     Because any global privilege is considered a privilege for all
     databases, any global privilege enables a user to see all database
     names with *Note `SHOW DATABASES': show-databases. or by examining
     the *Note `SCHEMATA': schemata-table. table of
     `INFORMATION_SCHEMA'.

   * The `db' table scope columns determine which users can access
     which databases from which hosts. The privilege columns determine
     which operations are permitted. A privilege granted at the
     database level applies to the database and to all objects in the
     database, such as tables and stored programs.

   * The `host' table is used in conjunction with the `db' table when
     you want a given `db' table row to apply to several hosts. For
     example, if you want a user to be able to use a database from
     several hosts in your network, leave the `Host' value empty in the
     user's `db' table row, then populate the `host' table with a row
     for each of those hosts. This mechanism is described more detail in
     *Note request-access::.

     *Note*:

     The `host' table must be modified directly with statements such as
     *Note `INSERT': insert, *Note `UPDATE': update, and *Note
     `DELETE': delete. It is not affected by statements such as *Note
     `GRANT': grant. and *Note `REVOKE': revoke. that modify the grant
     tables indirectly. Most MySQL installations need not use this
     table at all.

   * The `tables_priv' and `columns_priv' tables are similar to the
     `db' table, but are more fine-grained: They apply at the table and
     column levels rather than at the database level. A privilege
     granted at the table level applies to the table and to all its
     columns. A privilege granted at the column level applies only to a
     specific column.

   * The `procs_priv' table applies to stored routines. A privilege
     granted at the routine level applies only to a single routine.

   * The `proxies_priv' table indicates which users can act as proxies
     for other users and whether proxy users can grant the `PROXY'
     privilege to other users.

The server uses the `user', `db', and `host' tables in the `mysql'
database at both the first and second stages of access control (see
*Note privilege-system::).  The columns in the `user' and `db' tables
are shown here. The `host' table is similar to the `db' table but has a
specialized use as described in *Note request-access::.

*`user' and `db' Table Columns*

Table Name                    `user'                 `db'
*Scope columns*               `Host'                 `Host'
                              `User'                 `Db'
                              `Password'             `User'
*Privilege columns*           `Select_priv'          `Select_priv'
                              `Insert_priv'          `Insert_priv'
                              `Update_priv'          `Update_priv'
                              `Delete_priv'          `Delete_priv'
                              `Index_priv'           `Index_priv'
                              `Alter_priv'           `Alter_priv'
                              `Create_priv'          `Create_priv'
                              `Drop_priv'            `Drop_priv'
                              `Grant_priv'           `Grant_priv'
                              `Create_view_priv'     `Create_view_priv'
                              `Show_view_priv'       `Show_view_priv'
                              `Create_routine_priv'  `Create_routine_priv'
                              `Alter_routine_priv'   `Alter_routine_priv'
                              `Execute_priv'         `Execute_priv'
                              `Trigger_priv'         `Trigger_priv'
                              `Event_priv'           `Event_priv'
                              `Create_tmp_table_priv'`Create_tmp_table_priv'
                              `Lock_tables_priv'     `Lock_tables_priv'
                              `References_priv'      `References_priv'
                              `Reload_priv'          
                              `Shutdown_priv'        
                              `Process_priv'         
                              `File_priv'            
                              `Show_db_priv'         
                              `Super_priv'           
                              `Repl_slave_priv'      
                              `Repl_client_priv'     
                              `Create_user_priv'     
                              `Create_tablespace_priv'
*Security columns*            `ssl_type'             
                              `ssl_cipher'           
                              `x509_issuer'          
                              `x509_subject'         
                              `plugin'               
                              `authentication_string'
*Resource control columns*    `max_questions'        
                              `max_updates'          
                              `max_connections'      
                              `max_user_connections' 

As of MySQL 5.5.7, the `mysql.user' table has `plugin' and
`authentication_string' columns for storing authentication plugin
information.

If the `plugin' column for an account row is empty, the server
authenticates the account using either the `mysql_native_password' or
`mysql_old_password' plugin, depending on whether the password hash
value in the `Password' column used native hashing or the older pre-4.1
hashing method. Clients must match the password in the `Password' column
of the account row.

If an account row names a plugin in the `plugin' column, the server
uses it to authenticate connection attempts for the account. Whether
the plugin uses the value in the `Password' column is up to the plugin.

Prior to MySQL 5.5.11, the length of the `plugin' column was 60
characters. This was increased to 64 characters in MySQL 5.5.11 for
compatibility with the `mysql.plugin' table's `name' column. (Bug
#11766610, Bug #59752)

During the second stage of access control, the server performs request
verification to make sure that each client has sufficient privileges
for each request that it issues. In addition to the `user', `db', and
`host' grant tables, the server may also consult the `tables_priv' and
`columns_priv' tables for requests that involve tables. The latter
tables provide finer privilege control at the table and column levels.
They have the columns shown in the following table.

*`tables_priv' and `columns_priv' Table Columns*

Table Name     `tables_priv'  `columns_priv'
*Scope         `Host'         `Host'
columns*                      
               `Db'           `Db'
               `User'         `User'
               `Table_name'   `Table_name'
                              `Column_name'
*Privilege     `Table_priv'   `Column_priv'
columns*                      
               `Column_priv'  
*Other         `Timestamp'    `Timestamp'
columns*                      
               `Grantor'      

The `Timestamp' and `Grantor' columns are set to the current timestamp
and the `CURRENT_USER' value, respectively.  However, they are unused
and are discussed no further here.

For verification of requests that involve stored routines, the server
may consult the `procs_priv' table, which has the columns shown in the
following table.

*`procs_priv' Table Columns*

Table Name     `procs_priv'
*Scope         `Host'
columns*       
               `Db'
               `User'
               `Routine_name'
               `Routine_type'
*Privilege     `Proc_priv'
columns*       
*Other         `Timestamp'
columns*       
               `Grantor'

The `Routine_type' column is an *Note `ENUM': enum. column with values
of `'FUNCTION'' or `'PROCEDURE'' to indicate the type of routine the
row refers to. This column enables privileges to be granted separately
for a function and a procedure with the same name.

The `Timestamp' and `Grantor' columns currently are unused and are
discussed no further here.

The `proxies_priv' table was added in MySQL 5.5.7 and records
information about proxy users. It has these columns:

   * `Host', `User': These columns indicate the user account that has
     the `PROXY' privilege for the proxied account.

   * `Proxied_host', `Proxied_user': These columns indicate the account
     of the proxied user.

   * `Grantor': Currently unused.

   * `Timestamp': Currently unused.

   * `With_grant': This column indicates whether the proxy account can
     grant the `PROXY' privilege to other accounts.

Scope columns in the grant tables contain strings. They are declared as
shown here; the default value for each is the empty string.

*Grant Table Scope Column Types*

Column Name                   Type
`Host', `Proxied_host'        `CHAR(60)'
`User', `Proxied_user'        `CHAR(16)'
`Password'                    `CHAR(41)'
`Db'                          `CHAR(64)'
`Table_name'                  `CHAR(64)'
`Column_name'                 `CHAR(64)'
`Routine_name'                `CHAR(64)'

For access-checking purposes, comparisons of `User', `Proxied_user',
`Password', `Db', and `Table_name' values are case sensitive.
Comparisons of `Host', `Proxied_host', `Column_name', and
`Routine_name' values are not case sensitive.

In the `user', `db', and `host' tables, each privilege is listed in a
separate column that is declared as `ENUM('N','Y') DEFAULT 'N''. In
other words, each privilege can be disabled or enabled, with the
default being disabled.

In the `tables_priv', `columns_priv', and `procs_priv' tables, the
privilege columns are declared as *Note `SET': set. columns. Values in
these columns can contain any combination of the privileges controlled
by the table. Only those privileges listed in the column value are
enabled.

*Set-Type Privilege Column Values*

Table Name     Column Name        Possible Set Elements
`tables_priv'  `Table_priv'       `'Select', 'Insert', 'Update',
                                  'Delete', 'Create', 'Drop',
                                  'Grant', 'References', 'Index',
                                  'Alter', 'Create View', 'Show
                                  view', 'Trigger''
`tables_priv'  `Column_priv'      `'Select', 'Insert', 'Update',
                                  'References''
`columns_priv' `Column_priv'      `'Select', 'Insert', 'Update',
                                  'References''
`procs_priv'   `Proc_priv'        `'Execute', 'Alter Routine',
                                  'Grant''

Administrative privileges (such as `RELOAD' or `SHUTDOWN') are
specified only in the `user' table. Administrative operations are
operations on the server itself and are not database-specific, so there
is no reason to list these privileges in the other grant tables.
Consequently, to determine whether you can perform an administrative
operation, the server need consult only the `user' table.

The `FILE' privilege also is specified only in the `user' table. It is
not an administrative privilege as such, but your ability to read or
write files on the server host is independent of the database you are
accessing.

The *Note `mysqld': mysqld. server reads the contents of the grant
tables into memory when it starts. You can tell it to reload the tables
by issuing a *Note `FLUSH PRIVILEGES': flush.  statement or executing a
*Note `mysqladmin flush-privileges': mysqladmin. or *Note `mysqladmin
reload': mysqladmin.  command. Changes to the grant tables take effect
as indicated in *Note privilege-changes::.

When you modify an account's privileges, it is a good idea to verify
that the changes set up privileges the way you want. To check the
privileges for a given account, use the *Note `SHOW GRANTS':
show-grants. statement (see *Note show-grants::). For example, to
determine the privileges that are granted to an account with user name
and host name values of `bob' and `pc84.example.com', use this
statement:

     SHOW GRANTS FOR 'bob'@'pc84.example.com';


File: manual.info,  Node: account-names,  Next: connection-access,  Prev: grant-table-structure,  Up: privilege-system

6.2.3 Specifying Account Names
------------------------------

MySQL account names consist of a user name and a host name. This
enables creation of accounts for users with the same name who can
connect from different hosts. This section describes how to write
account names, including special values and wildcard rules.

In SQL statements such as *Note `CREATE USER': create-user, *Note
`GRANT': grant, and *Note `SET PASSWORD': set-password, write account
names using the following rules:

   * Syntax for account names is `'USER_NAME'@'HOST_NAME''.

   * An account name consisting only of a user name is equivalent to
     `'USER_NAME'@'%''.  For example, `'me'' is equivalent to
     `'me'@'%''.

   * The user name and host name need not be quoted if they are legal
     as unquoted identifiers. Quotes are necessary to specify a
     USER_NAME string containing special characters (such as ``-''), or
     a HOST_NAME string containing special characters or wildcard
     characters (such as ``%''); for example, `'test-user'@'%.com''.

   * Quote user names and host names as identifiers or as strings,
     using either backticks (```''), single quotation marks (``'''), or
     double quotation marks (``"'').

   * The user name and host name parts, if quoted, must be quoted
     separately. That is, write `'me'@'localhost'', not
     `'me@localhost''; the latter is interpreted as
     `'me@localhost'@'%''.

   * A reference to the `CURRENT_USER' or `CURRENT_USER()' function is
     equivalent to specifying the current client's user name and host
     name literally.

MySQL stores account names in grant tables in the `mysql' database
using separate columns for the user name and host name parts:

   * The `user' table contains one row for each account. The `User' and
     `Host' columns store the user name and host name. This table also
     indicates which global privileges the account has.

   * Other grant tables indicate privileges an account has for
     databases and objects within databases. These tables have `User'
     and `Host' columns to store the account name. Each row in these
     tables associates with the account in the `user' table that has
     the same `User' and `Host' values.

For additional detail about grant table structure, see *Note
grant-table-structure::.

User names and host names have certain special values or wildcard
conventions, as described following.

A user name is either a nonblank value that literally matches the user
name for incoming connection attempts, or a blank value (empty string)
that matches any user name. An account with a blank user name is an
anonymous user. To specify an anonymous user in SQL statements, use a
quoted empty user name part, such as `''@'localhost''.

The host name part of an account name can take many forms, and
wildcards are permitted:

   * A host value can be a host name or an IP address (IPv4 or IPv6).
     The name `'localhost'' indicates the local host. The IP address
     `'127.0.0.1'' indicates the IPv4 loopback interface. The IP address
     `'::1'' indicates the IPv6 loopback interface.

   * You can use the wildcard characters ``%'' and ``_'' in host name
     or IP address values. These have the same meaning as for
     pattern-matching operations performed with the `LIKE' operator.
     For example, a host value of `'%'' matches any host name, whereas
     a value of `'%.mysql.com'' matches any host in the `mysql.com'
     domain.  `'192.168.1.%'' matches any host in the 192.168.1 class C
     network.

     Because you can use IP wildcard values in host values (for
     example, `'192.168.1.%'' to match every host on a subnet), someone
     could try to exploit this capability by naming a host
     `192.168.1.somewhere.com'. To foil such attempts, MySQL disallows
     matching on host names that start with digits and a dot. Thus, if
     you have a host named something like `1.2.example.com', its name
     never matches the host part of account names. An IP wildcard value
     can match only IP addresses, not host names.

   * For a host value specified as an IPv4 address, you can specify a
     netmask indicating how many address bits to use for the network
     number. Netmask notation cannot be used for IPv6 addresses.

     The syntax is `HOST_IP/NETMASK'.  For example:

          CREATE USER 'david'@'192.58.197.0/255.255.255.0';

     This enables `david' to connect from any client host having an IP
     address CLIENT_IP for which the following condition is true:

          CLIENT_IP & NETMASK = HOST_IP

     That is, for the *Note `CREATE USER': create-user.  statement just
     shown:

          CLIENT_IP & 255.255.255.0 = 192.58.197.0

     IP addresses that satisfy this condition and can connect to the
     MySQL server are those in the range from `192.58.197.0' to
     `192.58.197.255'.

     The netmask can only be used to tell the server to use 8, 16, 24,
     or 32 bits of the address. Examples:

        * `192.0.0.0/255.0.0.0': Any host on the 192 class A network

        * `192.168.0.0/255.255.0.0': Any host on the 192.168 class B
          network

        * `192.168.1.0/255.255.255.0': Any host on the 192.168.1 class
          C network

        * `192.168.1.1': Only the host with this specific IP address

     The following netmask will not work because it masks 28 bits, and
     28 is not a multiple of 8:

          192.168.0.1/255.255.255.240

The server performs matching of host values in account names against
the client host using the value returned by the system DNS resolver for
the client host name or IP address. Except in the case that the account
host value is specified using netmask notation, this comparison is
performed as a string match, even for an account host value given as an
IP address. This means that you should specify account host values in
the same format used by DNS.  Here are examples of problems to watch
out for:

   * Suppose that a host on the local network has a fully qualified
     name of `host1.example.com'. If DNS returns name lookups for this
     host as `host1.example.com', use that name in account host values.
     But if DNS returns just `host1', use `host1' instead.

   * If DNS returns the IP address for a given host as `192.168.1.2',
     that will match an account host value of `192.168.1.2' but not
     `192.168.01.2'. Similarly, it will match an account host pattern
     like `192.168.1.%' but not `192.168.01.%'.

To avoid problems like this, it is advisable to check the format in
which your DNS returns host names and addresses, and use values in the
same format in MySQL account names.


File: manual.info,  Node: connection-access,  Next: request-access,  Prev: account-names,  Up: privilege-system

6.2.4 Access Control, Stage 1: Connection Verification
------------------------------------------------------

When you attempt to connect to a MySQL server, the server accepts or
rejects the connection based on your identity and whether you can
verify your identity by supplying the correct password. If not, the
server denies access to you completely. Otherwise, the server accepts
the connection, and then enters Stage 2 and waits for requests.

Your identity is based on two pieces of information:

   * The client host from which you connect

   * Your MySQL user name

Identity checking is performed using the three `user' table scope
columns (`Host', `User', and `Password'). The server accepts the
connection only if the `Host' and `User' columns in some `user' table
row match the client host name and user name and the client supplies
the password specified in that row. The rules for permissible `Host'
and `User' values are given in *Note account-names::.

If the `User' column value is nonblank, the user name in an incoming
connection must match exactly. If the `User' value is blank, it matches
any user name.  If the `user' table row that matches an incoming
connection has a blank user name, the user is considered to be an
anonymous user with no name, not a user with the name that the client
actually specified. This means that a blank user name is used for all
further access checking for the duration of the connection (that is,
during Stage 2).

The `Password' column can be blank. This is not a wildcard and does not
mean that any password matches. It means that the user must connect
without specifying a password. If the server authenticates a client
using a plugin, the authentication method that the plugin implements
may or may not use the password in the `Password' column. In this case,
it is possible that an external password is also used to authenticate to
the MySQL server.

Nonblank `Password' values in the `user' table represent encrypted
passwords. MySQL does not store passwords in plaintext form for anyone
to see.  Rather, the password supplied by a user who is attempting to
connect is encrypted (using the `PASSWORD()' function). The encrypted
password then is used during the connection process when checking
whether the password is correct. This is done without the encrypted
password ever traveling over the connection. See *Note user-names::.

From MySQL's point of view, the encrypted password is the _real_
password, so you should never give anyone access to it. In particular,
_do not give nonadministrative users read access to tables in the
`mysql' database_.

The following table shows how various combinations of `Host' and `User'
values in the `user' table apply to incoming connections.

This table shows how various combinations of `Host' and `User' values in
the `user' table apply to incoming connections to a MySQL server.

`Host' Value              `User'      Permissible Connections
                          Value       
`'thomas.loc.gov''        `'fred''    `fred', connecting from
                                      `thomas.loc.gov'
`'thomas.loc.gov''        `'''        Any user, connecting from
                                      `thomas.loc.gov'
`'%''                     `'fred''    `fred', connecting from any host
`'%''                     `'''        Any user, connecting from any host
`'%.loc.gov''             `'fred''    `fred', connecting from any host in
                                      the `loc.gov' domain
`'x.y.%''                 `'fred''    `fred', connecting from `x.y.net',
                                      `x.y.com', `x.y.edu', and so on;
                                      this is probably not useful
`'144.155.166.177''       `'fred''    `fred', connecting from the host
                                      with IP address `144.155.166.177'
`'144.155.166.%''         `'fred''    `fred', connecting from any host in
                                      the `144.155.166' class C subnet
`'144.155.166.0/255.255.255.0''`'fred''    Same as previous example

It is possible for the client host name and user name of an incoming
connection to match more than one row in the `user' table. The
preceding set of examples demonstrates this: Several of the entries
shown match a connection from `thomas.loc.gov' by `fred'.

When multiple matches are possible, the server must determine which of
them to use. It resolves this issue as follows:

   * Whenever the server reads the `user' table into memory, it sorts
     the rows.

   * When a client attempts to connect, the server looks through the
     rows in sorted order.

   * The server uses the first row that matches the client host name
     and user name.

The server uses sorting rules that order rows with the most-specific
`Host' values first. Literal host names and IP addresses are the most
specific. (The specificity of a literal IP address is not affected by
whether it has a netmask, so `192.168.1.13' and
`192.168.1.0/255.255.255.0' are considered equally specific.) The
pattern `'%'' means `any host' and is least specific. The empty string
`''' also means `any host' but sorts after `'%''. Rows with the same
`Host' value are ordered with the most-specific `User' values first (a
blank `User' value means `any user' and is least specific).

To see how this works, suppose that the `user' table looks like this:

     +-----------+----------+-
     | Host      | User     | ...
     +-----------+----------+-
     | %         | root     | ...
     | %         | jeffrey  | ...
     | localhost | root     | ...
     | localhost |          | ...
     +-----------+----------+-

When the server reads the table into memory, it sorts the rows using
the rules just described. The result after sorting looks like this:

     +-----------+----------+-
     | Host      | User     | ...
     +-----------+----------+-
     | localhost | root     | ...
     | localhost |          | ...
     | %         | jeffrey  | ...
     | %         | root     | ...
     +-----------+----------+-

When a client attempts to connect, the server looks through the sorted
rows and uses the first match found. For a connection from `localhost'
by `jeffrey', two of the rows from the table match: the one with `Host'
and `User' values of `'localhost'' and `''', and the one with values of
`'%'' and `'jeffrey''. The `'localhost'' row appears first in sorted
order, so that is the one the server uses.

Here is another example. Suppose that the `user' table looks like this:

     +----------------+----------+-
     | Host           | User     | ...
     +----------------+----------+-
     | %              | jeffrey  | ...
     | thomas.loc.gov |          | ...
     +----------------+----------+-

The sorted table looks like this:

     +----------------+----------+-
     | Host           | User     | ...
     +----------------+----------+-
     | thomas.loc.gov |          | ...
     | %              | jeffrey  | ...
     +----------------+----------+-

A connection by `jeffrey' from `thomas.loc.gov' is matched by the first
row, whereas a connection by `jeffrey' from any host is matched by the
second.

*Note*:

It is a common misconception to think that, for a given user name, all
rows that explicitly name that user are used first when the server
attempts to find a match for the connection.  This is not true. The
preceding example illustrates this, where a connection from
`thomas.loc.gov' by `jeffrey' is first matched not by the row
containing `'jeffrey'' as the `User' column value, but by the row with
no user name. As a result, `jeffrey' is authenticated as an anonymous
user, even though he specified a user name when connecting.

If you are able to connect to the server, but your privileges are not
what you expect, you probably are being authenticated as some other
account. To find out what account the server used to authenticate you,
use the `CURRENT_USER()' function. (See *Note information-functions::.)
It returns a value in `USER_NAME@HOST_NAME' format that indicates the
`User' and `Host' values from the matching `user' table row. Suppose
that `jeffrey' connects and issues the following query:

     mysql> SELECT CURRENT_USER();
     +----------------+
     | CURRENT_USER() |
     +----------------+
     | @localhost     |
     +----------------+

The result shown here indicates that the matching `user' table row had
a blank `User' column value. In other words, the server is treating
`jeffrey' as an anonymous user.

Another way to diagnose authentication problems is to print out the
`user' table and sort it by hand to see where the first match is being
made.


File: manual.info,  Node: request-access,  Next: privilege-changes,  Prev: connection-access,  Up: privilege-system

6.2.5 Access Control, Stage 2: Request Verification
---------------------------------------------------

After you establish a connection, the server enters Stage 2 of access
control. For each request that you issue through that connection, the
server determines what operation you want to perform, then checks
whether you have sufficient privileges to do so. This is where the
privilege columns in the grant tables come into play. These privileges
can come from any of the `user', `db', `host', `tables_priv',
`columns_priv', or `procs_priv' tables. (You may find it helpful to
refer to *Note grant-table-structure::, which lists the columns present
in each of the grant tables.)

The `user' table grants privileges that are assigned to you on a global
basis and that apply no matter what the default database is. For
example, if the `user' table grants you the `DELETE' privilege, you can
delete rows from any table in any database on the server host! It is
wise to grant privileges in the `user' table only to people who need
them, such as database administrators. For other users, you should
leave all privileges in the `user' table set to `'N'' and grant
privileges at more specific levels only. You can grant privileges for
particular databases, tables, columns, or routines.

The `db' and `host' tables grant database-specific privileges. Values
in the scope columns of these tables can take the following forms:

   * A blank `User' value in the `db' table matches the anonymous user.
     A nonblank value matches literally; there are no wildcards in user
     names.

   * The wildcard characters ``%'' and ``_'' can be used in the `Host'
     and `Db' columns of either table. These have the same meaning as
     for pattern-matching operations performed with the `LIKE'
     operator. If you want to use either character literally when
     granting privileges, you must escape it with a backslash. For
     example, to include the underscore character (``_'') as part of a
     database name, specify it as ``\_'' in the *Note `GRANT': grant.
     statement.

   * A `'%'' `Host' value in the `db' table means `any host.' A blank
     `Host' value in the `db' table means `consult the `host' table for
     further information' (a process that is described later in this
     section).

   * A `'%'' or blank `Host' value in the `host' table means `any host.'

   * A `'%'' or blank `Db' value in either table means `any database.'

The server reads the `db' and `host' tables into memory and sorts them
at the same time that it reads the `user' table. The server sorts the
`db' table based on the `Host', `Db', and `User' scope columns, and
sorts the `host' table based on the `Host' and `Db' scope columns. As
with the `user' table, sorting puts the most-specific values first and
least-specific values last, and when the server looks for matching
entries, it uses the first match that it finds.

The `tables_priv', `columns_priv', and `procs_priv' tables grant
table-specific, column-specific, and routine-specific privileges.
Values in the scope columns of these tables can take the following
forms:

   * The wildcard characters ``%'' and ``_'' can be used in the `Host'
     column. These have the same meaning as for pattern-matching
     operations performed with the `LIKE' operator.

   * A `'%'' or blank `Host' value means `any host.'

   * The `Db', `Table_name', `Column_name', and `Routine_name' columns
     cannot contain wildcards or be blank.

The server sorts the `tables_priv', `columns_priv', and `procs_priv'
tables based on the `Host', `Db', and `User' columns. This is similar
to `db' table sorting, but simpler because only the `Host' column can
contain wildcards.

The server uses the sorted tables to verify each request that it
receives. For requests that require administrative privileges such as
`SHUTDOWN' or `RELOAD', the server checks only the `user' table row
because that is the only table that specifies administrative
privileges. The server grants access if the row permits the requested
operation and denies access otherwise. For example, if you want to
execute *Note `mysqladmin shutdown': mysqladmin. but your `user' table
row does not grant the `SHUTDOWN' privilege to you, the server denies
access without even checking the `db' or `host' tables. (They contain
no `Shutdown_priv' column, so there is no need to do so.)

For database-related requests (*Note `INSERT': insert, *Note `UPDATE':
update, and so on), the server first checks the user's global
privileges by looking in the `user' table row. If the row permits the
requested operation, access is granted. If the global privileges in the
`user' table are insufficient, the server determines the user's
database-specific privileges by checking the `db' and `host' tables:

  1. The server looks in the `db' table for a match on the `Host', `Db',
     and `User' columns. The `Host' and `User' columns are matched to
     the connecting user's host name and MySQL user name. The `Db'
     column is matched to the database that the user wants to access.
     If there is no row for the `Host' and `User', access is denied.

  2. If there is a matching `db' table row and its `Host' column is not
     blank, that row defines the user's database-specific privileges.

  3. If the matching `db' table row's `Host' column is blank, it
     signifies that the `host' table enumerates which hosts should be
     permitted access to the database. In this case, a further lookup
     is done in the `host' table to find a match on the `Host' and `Db'
     columns. If no `host' table row matches, access is denied. If
     there is a match, the user's database-specific privileges are
     computed as the intersection (_not_ the union!) of the privileges
     in the `db' and `host' table entries; that is, the privileges that
     are `'Y'' in both entries. (This way you can grant general
     privileges in the `db' table row and then selectively restrict
     them on a host-by-host basis using the `host' table entries.)

After determining the database-specific privileges granted by the `db'
and `host' table entries, the server adds them to the global privileges
granted by the `user' table. If the result permits the requested
operation, access is granted. Otherwise, the server successively checks
the user's table and column privileges in the `tables_priv' and
`columns_priv' tables, adds those to the user's privileges, and permits
or denies access based on the result. For stored-routine operations, the
server uses the `procs_priv' table rather than `tables_priv' and
`columns_priv'.

Expressed in boolean terms, the preceding description of how a user's
privileges are calculated may be summarized like this:

     global privileges
     OR (database privileges AND host privileges)
     OR table privileges
     OR column privileges
     OR routine privileges

It may not be apparent why, if the global `user' row privileges are
initially found to be insufficient for the requested operation, the
server adds those privileges to the database, table, and column
privileges later. The reason is that a request might require more than
one type of privilege. For example, if you execute an *Note `INSERT
INTO ... SELECT': insert-select. statement, you need both the `INSERT'
and the `SELECT' privileges. Your privileges might be such that the
`user' table row grants one privilege and the `db' table row grants the
other. In this case, you have the necessary privileges to perform the
request, but the server cannot tell that from either table by itself;
the privileges granted by the entries in both tables must be combined.

The `host' table is not affected by the *Note `GRANT': grant. or *Note
`REVOKE': revoke. statements, so it is unused in most MySQL
installations. If you modify it directly, you can use it for some
specialized purposes, such as to maintain a list of secure servers on
the local network that are granted all privileges.

You can also use the `host' table to indicate hosts that are _not_
secure. Suppose that you have a machine `public.your.domain' that is
located in a public area that you do not consider secure. You can
enable access to all hosts on your network except that machine by using
`host' table entries like this:

     +--------------------+----+-
     | Host               | Db | ...
     +--------------------+----+-
     | public.your.domain | %  | ... (all privileges set to 'N')
     | %.your.domain      | %  | ... (all privileges set to 'Y')
     +--------------------+----+-


File: manual.info,  Node: privilege-changes,  Next: access-denied,  Prev: request-access,  Up: privilege-system

6.2.6 When Privilege Changes Take Effect
----------------------------------------

When *Note `mysqld': mysqld. starts, it reads all grant table contents
into memory. The in-memory tables become effective for access control
at that point.

If you modify the grant tables indirectly using account-management
statements such as *Note `GRANT': grant, *Note `REVOKE': revoke, *Note
`SET PASSWORD': set-password, or *Note `RENAME USER': rename-user, the
server notices these changes and loads the grant tables into memory
again immediately.

If you modify the grant tables directly using statements such as *Note
`INSERT': insert, *Note `UPDATE': update, or *Note `DELETE': delete,
your changes have no effect on privilege checking until you either
restart the server or tell it to reload the tables. If you change the
grant tables directly but forget to reload them, your changes have _no
effect_ until you restart the server. This may leave you wondering why
your changes seem to make no difference!

To tell the server to reload the grant tables, perform a
flush-privileges operation. This can be done by issuing a *Note `FLUSH
PRIVILEGES': flush.  statement or by executing a *Note `mysqladmin
flush-privileges': mysqladmin. or *Note `mysqladmin reload': mysqladmin.
command.

A grant table reload affects privileges for each existing client
connection as follows:

   * Table and column privilege changes take effect with the client's
     next request.

   * Database privilege changes take effect the next time the client
     executes a `USE DB_NAME' statement.

     *Note*:

     Client applications may cache the database name; thus, this effect
     may not be visible to them without actually changing to a
     different database or flushing the privileges.

   * Global privileges and passwords are unaffected for a connected
     client. These changes take effect only for subsequent connections.

If the server is started with the `--skip-grant-tables' option, it does
not read the grant tables or implement any access control. Anyone can
connect and do anything, _which is insecure._ To cause a server thus
started to read the tables and enable access checking, flush the
privileges.


File: manual.info,  Node: access-denied,  Prev: privilege-changes,  Up: privilege-system

6.2.7 Causes of Access-Denied Errors
------------------------------------

If you encounter problems when you try to connect to the MySQL server,
the following items describe some courses of action you can take to
correct the problem.

   * Make sure that the server is running. If it is not, clients cannot
     connect to it. For example, if an attempt to connect to the server
     fails with a message such as one of those following, one cause
     might be that the server is not running:

          shell> mysql
          ERROR 2003: Can't connect to MySQL server on 'HOST_NAME' (111)
          shell> mysql
          ERROR 2002: Can't connect to local MySQL server through socket
          '/tmp/mysql.sock' (111)

   * It might be that the server is running, but you are trying to
     connect using a TCP/IP port, named pipe, or Unix socket file
     different from the one on which the server is listening. To
     correct this when you invoke a client program, specify a `--port'
     option to indicate the proper port number, or a `--socket' option
     to indicate the proper named pipe or Unix socket file. To find out
     where the socket file is, you can use this command:

          shell> netstat -ln | grep mysql

   * Make sure that the server has not been configured to ignore
     network connections or (if you are attempting to connect remotely)
     that it has not been configured to listen only locally on its
     network interfaces. If the server was started with
     `--skip-networking', it will not accept TCP/IP connections at all.
     If the server was started with `--bind-address=127.0.0.1', it will
     listen for TCP/IP connections only locally on the loopback
     interface and will not accept remote connections.

   * Check to make sure that there is no firewall blocking access to
     MySQL. Your firewall may be configured on the basis of the
     application being executed, or the port number used by MySQL for
     communication (3306 by default). Under Linux or Unix, check your
     IP tables (or similar) configuration to ensure that the port has
     not been blocked. Under Windows, applications such as ZoneAlarm or
     the Windows XP personal firewall may need to be configured not to
     block the MySQL port.

   * The grant tables must be properly set up so that the server can
     use them for access control. For some distribution types (such as
     binary distributions on Windows, or RPM distributions on Linux),
     the installation process initializes the `mysql' database
     containing the grant tables.  For distributions that do not do
     this, you must initialize the grant tables manually by running the
     *Note `mysql_install_db': mysql-install-db. script. For details,
     see *Note unix-postinstallation::.

     To determine whether you need to initialize the grant tables, look
     for a `mysql' directory under the data directory. (The data
     directory normally is named `data' or `var' and is located under
     your MySQL installation directory.) Make sure that you have a file
     named `user.MYD' in the `mysql' database directory. If not,
     execute the *Note `mysql_install_db': mysql-install-db. script.
     After running this script and starting the server, test the initial
     privileges by executing this command:

          shell> mysql -u root test

     The server should let you connect without error.

   * After a fresh installation, you should connect to the server and
     set up your users and their access permissions:

          shell> mysql -u root mysql

     The server should let you connect because the MySQL `root' user
     has no password initially. That is also a security risk, so
     setting the password for the `root' accounts is something you
     should do while you're setting up your other MySQL accounts. For
     instructions on setting the initial passwords, see *Note
     default-privileges::.

   * If you have updated an existing MySQL installation to a newer
     version, did you run the *Note `mysql_upgrade': mysql-upgrade.
     script? If not, do so. The structure of the grant tables changes
     occasionally when new capabilities are added, so after an upgrade
     you should always make sure that your tables have the current
     structure. For instructions, see *Note mysql-upgrade::.

   * If a client program receives the following error message when it
     tries to connect, it means that the server expects passwords in a
     newer format than the client is capable of generating:

          shell> mysql
          Client does not support authentication protocol requested
          by server; consider upgrading MySQL client

     For information on how to deal with this, see *Note
     password-hashing::, and *Note old-client::.

   * Remember that client programs use connection parameters specified
     in option files or environment variables. If a client program
     seems to be sending incorrect default connection parameters when
     you have not specified them on the command line, check any
     applicable option files and your environment. For example, if you
     get `Access denied' when you run a client without any options,
     make sure that you have not specified an old password in any of
     your option files!

     You can suppress the use of option files by a client program by
     invoking it with the `--no-defaults' option. For example:

          shell> mysqladmin --no-defaults -u root version

     The option files that clients use are listed in *Note
     option-files::. Environment variables are listed in *Note
     environment-variables::.

   * If you get the following error, it means that you are using an
     incorrect `root' password:

          shell> mysqladmin -u root -pXXXX ver
          Access denied for user 'root'@'localhost' (using password: YES)

     If the preceding error occurs even when you have not specified a
     password, it means that you have an incorrect password listed in
     some option file. Try the `--no-defaults' option as described in
     the previous item.

     For information on changing passwords, see *Note
     assigning-passwords::.

     If you have lost or forgotten the `root' password, see *Note
     resetting-permissions::.

   * If you change a password by using *Note `SET PASSWORD':
     set-password, *Note `INSERT': insert, or *Note `UPDATE': update,
     you must encrypt the password using the `PASSWORD()' function. If
     you do not use `PASSWORD()' for these statements, the password
     will not work. For example, the following statement assigns a
     password, but fails to encrypt it, so the user is not able to
     connect afterward:

          SET PASSWORD FOR 'abe'@'HOST_NAME' = 'eagle';

     Instead, set the password like this:

          SET PASSWORD FOR 'abe'@'HOST_NAME' = PASSWORD('eagle');

     The `PASSWORD()' function is unnecessary when you specify a
     password using the *Note `CREATE USER': create-user. or *Note
     `GRANT': grant. statements or the *Note `mysqladmin password':
     mysqladmin. command. Each of those automatically uses `PASSWORD()'
     to encrypt the password. See *Note assigning-passwords::, and
     *Note create-user::.

   * `localhost' is a synonym for your local host name, and is also the
     default host to which clients try to connect if you specify no
     host explicitly.

     To avoid this problem on such systems, you can use a
     `--host=127.0.0.1' option to name the server host explicitly. This
     will make a TCP/IP connection to the local *Note `mysqld': mysqld.
     server. You can also use TCP/IP by specifying a `--host' option
     that uses the actual host name of the local host. In this case,
     the host name must be specified in a `user' table row on the
     server host, even though you are running the client program on the
     same host as the server.

   * The `Access denied' error message tells you who you are trying to
     log in as, the client host from which you are trying to connect,
     and whether you were using a password. Normally, you should have
     one row in the `user' table that exactly matches the host name and
     user name that were given in the error message. For example, if
     you get an error message that contains `using password: NO', it
     means that you tried to log in without a password.

   * If you get an `Access denied' error when trying to connect to the
     database with `mysql -u USER_NAME', you may have a problem with
     the `user' table. Check this by executing `mysql -u root mysql'
     and issuing this SQL statement:

          SELECT * FROM user;

     The result should include a row with the `Host' and `User' columns
     matching your client's host name and your MySQL user name.

   * If the following error occurs when you try to connect from a host
     other than the one on which the MySQL server is running, it means
     that there is no row in the `user' table with a `Host' value that
     matches the client host:

          Host ... is not allowed to connect to this MySQL server

     You can fix this by setting up an account for the combination of
     client host name and user name that you are using when trying to
     connect.

     If you do not know the IP address or host name of the machine from
     which you are connecting, you should put a row with `'%'' as the
     `Host' column value in the `user' table. After trying to connect
     from the client machine, use a `SELECT USER()' query to see how
     you really did connect. Then change the `'%'' in the `user' table
     row to the actual host name that shows up in the log. Otherwise,
     your system is left insecure because it permits connections from
     any host for the given user name.

     On Linux, another reason that this error might occur is that you
     are using a binary MySQL version that is compiled with a different
     version of the `glibc' library than the one you are using. In this
     case, you should either upgrade your operating system or `glibc',
     or download a source distribution of MySQL version and compile it
     yourself. A source RPM is normally trivial to compile and install,
     so this is not a big problem.

   * If you specify a host name when trying to connect, but get an
     error message where the host name is not shown or is an IP
     address, it means that the MySQL server got an error when trying
     to resolve the IP address of the client host to a name:

          shell> mysqladmin -u root -pXXXX -h SOME_HOSTNAME ver
          Access denied for user 'root'@'' (using password: YES)

     If you try to connect as `root' and get the following error, it
     means that you do not have a row in the `user' table with a `User'
     column value of `'root'' and that *Note `mysqld': mysqld. cannot
     resolve the host name for your client:

          Access denied for user ''@'unknown'

     These errors indicate a DNS problem. To fix it, execute *Note
     `mysqladmin flush-hosts': mysqladmin. to reset the internal DNS
     host cache. See *Note host-cache::.

     Some permanent solutions are:

        * Determine what is wrong with your DNS server and fix it.

        * Specify IP addresses rather than host names in the MySQL
          grant tables.

        * Put an entry for the client machine name in `/etc/hosts' on
          Unix or `\windows\hosts' on Windows.

        * Start *Note `mysqld': mysqld. with the `--skip-name-resolve'
          option.

        * Start *Note `mysqld': mysqld. with the `--skip-host-cache'
          option.

        * On Unix, if you are running the server and the client on the
          same machine, connect to `localhost'.  Unix connections to
          `localhost' use a Unix socket file rather than TCP/IP.

        * On Windows, if you are running the server and the client on
          the same machine and the server supports named pipe
          connections, connect to the host name `.' (period).
          Connections to `.' use a named pipe rather than TCP/IP.

   * If `mysql -u root test' works but `mysql -h YOUR_HOSTNAME -u root
     test' results in `Access denied' (where YOUR_HOSTNAME is the
     actual host name of the local host), you may not have the correct
     name for your host in the `user' table. A common problem here is
     that the `Host' value in the `user' table row specifies an
     unqualified host name, but your system's name resolution routines
     return a fully qualified domain name (or vice versa). For example,
     if you have an entry with host `'pluto'' in the `user' table, but
     your DNS tells MySQL that your host name is `'pluto.example.com'',
     the entry does not work. Try adding an entry to the `user' table
     that contains the IP address of your host as the `Host' column
     value.  (Alternatively, you could add an entry to the `user' table
     with a `Host' value that contains a wildcard; for example,
     `'pluto.%''. However, use of `Host' values ending with ``%'' is
     _insecure_ and is _not_ recommended!)

   * If `mysql -u USER_NAME test' works but `mysql -u USER_NAME
     OTHER_DB' does not, you have not granted access to the given user
     for the database named OTHER_DB.

   * If `mysql -u USER_NAME' works when executed on the server host,
     but `mysql -h HOST_NAME -u USER_NAME' does not work when executed
     on a remote client host, you have not enabled access to the server
     for the given user name from the remote host.

   * If you cannot figure out why you get `Access denied', remove from
     the `user' table all entries that have `Host' values containing
     wildcards (entries that contain `'%'' or `'_'' characters).  A
     very common error is to insert a new entry with `Host'=`'%'' and
     `User'=`'SOME_USER'', thinking that this enables you to specify
     `localhost' to connect from the same machine.  The reason that
     this does not work is that the default privileges include an entry
     with `Host'=`'localhost'' and `User'=`'''. Because that entry has
     a `Host' value `'localhost'' that is more specific than `'%'', it
     is used in preference to the new entry when connecting from
     `localhost'! The correct procedure is to insert a second entry with
     `Host'=`'localhost'' and `User'=`'SOME_USER'', or to delete the
     entry with `Host'=`'localhost'' and `User'=`'''. After deleting
     the entry, remember to issue a *Note `FLUSH PRIVILEGES': flush.
     statement to reload the grant tables. See also *Note
     connection-access::.

   * If you are able to connect to the MySQL server, but get an `Access
     denied' message whenever you issue a *Note `SELECT ... INTO
     OUTFILE': select-into. or *Note `LOAD DATA INFILE': load-data.
     statement, your entry in the `user' table does not have the `FILE'
     privilege enabled.

   * If you change the grant tables directly (for example, by using
     *Note `INSERT': insert, *Note `UPDATE': update, or *Note `DELETE':
     delete. statements) and your changes seem to be ignored, remember
     that you must execute a *Note `FLUSH PRIVILEGES': flush. statement
     or a *Note `mysqladmin flush-privileges': mysqladmin. command to
     cause the server to reload the privilege tables. Otherwise, your
     changes have no effect until the next time the server is
     restarted. Remember that after you change the `root' password with
     an *Note `UPDATE': update. statement, you will not need to specify
     the new password until after you flush the privileges, because the
     server will not know you've changed the password yet!

   * If your privileges seem to have changed in the middle of a
     session, it may be that a MySQL administrator has changed them.
     Reloading the grant tables affects new client connections, but it
     also affects existing connections as indicated in *Note
     privilege-changes::.

   * If you have access problems with a Perl, PHP, Python, or ODBC
     program, try to connect to the server with `mysql -u USER_NAME
     DB_NAME' or `mysql -u USER_NAME -pYOUR_PASS DB_NAME'. If you are
     able to connect using the *Note `mysql': mysql. client, the
     problem lies with your program, not with the access privileges.
     (There is no space between `-p' and the password; you can also use
     the `--password=YOUR_PASS' syntax to specify the password. If you
     use the `-p' or `--password' option with no password value, MySQL
     prompts you for the password.)

   * For testing purposes, start the *Note `mysqld': mysqld.  server
     with the `--skip-grant-tables' option.  Then you can change the
     MySQL grant tables and use the *Note `mysqlaccess': mysqlaccess.
     script to check whether your modifications have the desired
     effect. When you are satisfied with your changes, execute *Note
     `mysqladmin flush-privileges': mysqladmin. to tell the *Note
     `mysqld': mysqld. server to reload the privileges.  This enables
     you to begin using the new grant table contents without stopping
     and restarting the server.

   * If you get the following error, you may have a problem with the
     `db' or `host' table:

          Access to database denied

     If the entry selected from the `db' table has an empty value in
     the `Host' column, make sure that there are one or more
     corresponding entries in the `host' table specifying which hosts
     the `db' table entry applies to. This problem occurs infrequently
     because the `host' table is rarely used.

   * If everything else fails, start the *Note `mysqld': mysqld.
     server with a debugging option (for example,
     `--debug=d,general,query'). This prints host and user information
     about attempted connections, as well as information about each
     command issued. See *Note dbug-package::.

   * If you have any other problems with the MySQL grant tables and
     feel you must post the problem to the mailing list, always provide
     a dump of the MySQL grant tables. You can dump the tables with the
     *Note `mysqldump mysql': mysqldump. command. To file a bug report,
     see the instructions at *Note bug-reports::. In some cases, you
     may need to restart *Note `mysqld': mysqld. with
     `--skip-grant-tables' to run *Note `mysqldump': mysqldump.


File: manual.info,  Node: user-account-management,  Prev: privilege-system,  Up: security

6.3 MySQL User Account Management
=================================

* Menu:

* user-names::                   User Names and Passwords
* adding-users::                 Adding User Accounts
* removing-users::               Removing User Accounts
* user-resources::               Setting Account Resource Limits
* assigning-passwords::          Assigning Account Passwords
* pluggable-authentication::     Pluggable Authentication
* proxy-users::                  Proxy Users
* ssl-connections::              Using SSL for Secure Connections
* windows-and-ssh::              Connecting to MySQL Remotely from Windows with SSH
* audit-log-plugin::             MySQL Enterprise Audit Log Plugin
* account-activity-auditing::    SQL-Based MySQL Account Activity Auditing

This section describes how to set up accounts for clients of your MySQL
server. It discusses the following topics:

   * The meaning of account names and passwords as used in MySQL and
     how that compares to names and passwords used by your operating
     system

   * How to set up new accounts and remove existing accounts

   * How to change passwords

   * Guidelines for using passwords securely

   * How to use secure connections with SSL

See also *Note account-management-sql::, which describes the syntax and
use for all user-management SQL statements.


File: manual.info,  Node: user-names,  Next: adding-users,  Prev: user-account-management,  Up: user-account-management

6.3.1 User Names and Passwords
------------------------------

MySQL stores accounts in the `user' table of the `mysql' database. An
account is defined in terms of a user name and the client host or hosts
from which the user can connect to the server. The account may also
have a password.  For information about account representation in the
`user' table, see *Note grant-table-structure::. MySQL 5.5 supports
authentication plugins, so it is possible that an account authenticates
using some external authentication method. See *Note
pluggable-authentication::.

There are several distinctions between the way user names and passwords
are used by MySQL and the way they are used by your operating system:

   * User names, as used by MySQL for authentication purposes, have
     nothing to do with user names (login names) as used by Windows or
     Unix. On Unix, most MySQL clients by default try to log in using
     the current Unix user name as the MySQL user name, but that is for
     convenience only. The default can be overridden easily, because
     client programs permit any user name to be specified with a `-u' or
     `--user' option. Because this means that anyone can attempt to
     connect to the server using any user name, you cannot make a
     database secure in any way unless all MySQL accounts have
     passwords. Anyone who specifies a user name for an account that
     has no password is able to connect successfully to the server.

   * MySQL user names can be up to 16 characters long. Operating system
     user names, because they are completely unrelated to MySQL user
     names, may be of a different maximum length. For example, Unix
     user names typically are limited to eight characters.

     *Warning*:

     The limit on MySQL user name length is hard-coded in the MySQL
     servers and clients, and trying to circumvent it by modifying the
     definitions of the tables in the `mysql' database _does not work_.

     You should never alter any of the tables in the `mysql' database
     in any manner whatsoever except by means of the procedure that is
     described in *Note mysql-upgrade::. Attempting to redefine MySQL's
     system tables in any other fashion results in undefined (and
     unsupported!) behavior.

   * The server uses MySQL passwords stored in the `user' table to
     authenticate client connections using MySQL native authentication
     (against passwords stored in the `mysql.user' table).  These
     passwords have nothing to do with passwords for logging in to your
     operating system. There is no necessary connection between the
     `external' password you use to log in to a Windows or Unix machine
     and the password you use to access the MySQL server on that
     machine.

     If the server authenticates a client using a plugin, the
     authentication method that the plugin implements may or may not
     use the password in the `user' table. In this case, it is possible
     that an external password is also used to authenticate to the
     MySQL server.

   * MySQL encrypts passwords stored in the `user' table using its own
     algorithm. This encryption is the same as that implemented by the
     `PASSWORD()' SQL function but differs from that used during the
     Unix login process. Unix password encryption is the same as that
     implemented by the `ENCRYPT()' SQL function. See the descriptions
     of the `PASSWORD()' and `ENCRYPT()' functions in *Note
     encryption-functions::.

     From version 4.1 on, MySQL employs a stronger authentication
     method that has better password protection during the connection
     process than in earlier versions. It is secure even if TCP/IP
     packets are sniffed or the `mysql' database is captured. (In
     earlier versions, even though passwords are stored in encrypted
     form in the `user' table, knowledge of the encrypted password
     value could be used to connect to the MySQL server.)  *Note
     password-hashing::, discusses password encryption further.

   * It is possible to connect to the server regardless of character
     set settings if the user name and password contain only ASCII
     characters. To connect when the user name or password contain
     non-ASCII characters, the client should call the *Note
     `mysql_options()': mysql-options. C API function with the
     `MYSQL_SET_CHARSET_NAME' option and appropriate character set name
     as arguments. This causes authentication to take place using the
     specified character set. Otherwise, authentication will fail
     unless the server default character set is the same as the
     encoding in the authentication defaults.

     Standard MySQL client programs support a `--default-character-set'
     option that causes *Note `mysql_options()': mysql-options. to be
     called as just described. In addition, character set autodetection
     is supported as described in *Note charset-connection::. For
     programs that use a connector that is not based on the C API, the
     connector may provide an equivalent to *Note `mysql_options()':
     mysql-options. that can be used instead. Check the connector
     documentation.

     The preceding notes do not apply for `ucs2', `utf16', and `utf32',
     which are not permitted as client character sets.

When you install MySQL, the grant tables are populated with an initial
set of accounts. The names and access privileges for these accounts are
described in *Note default-privileges::, which also discusses how to
assign passwords to them. Thereafter, you normally set up, modify, and
remove MySQL accounts using statements such as *Note `CREATE USER':
create-user, *Note `GRANT': grant, and *Note `REVOKE': revoke. See
*Note account-management-sql::.

When you connect to a MySQL server with a command-line client, specify
the user name and password as necessary for the account that you want
to use:

     shell> mysql --user=monty --password=PASSWORD DB_NAME

If you prefer short options, the command looks like this:

     shell> mysql -u monty -pPASSWORD DB_NAME

There must be _no space_ between the `-p' option and the following
password value.

If you omit the PASSWORD value following the `--password' or `-p'
option on the command line, the client prompts for one.

Specifying a password on the command line should be considered
insecure. See *Note password-security-user::. You can use an option
file to avoid giving the password on the command line.

For additional information about specifying user names, passwords, and
other connection parameters, see *Note connecting::.


File: manual.info,  Node: adding-users,  Next: removing-users,  Prev: user-names,  Up: user-account-management

6.3.2 Adding User Accounts
--------------------------

You can create MySQL accounts in two ways:

   * By using statements intended for creating accounts, such as *Note
     `CREATE USER': create-user. or *Note `GRANT': grant. These
     statements cause the server to make appropriate modifications to
     the grant tables.

   * By manipulating the MySQL grant tables directly with statements
     such as *Note `INSERT': insert, *Note `UPDATE': update, or *Note
     `DELETE': delete.

The preferred method is to use account-creation statements because they
are more concise and less error-prone than manipulating the grant
tables directly. *Note `CREATE USER': create-user.  and *Note `GRANT':
grant. are described in *Note account-management-sql::.

Another option for creating accounts is to use the GUI tool MySQL
Workbench. Or one of several available third-party programs that offer
capabilities for MySQL account administration.  `phpMyAdmin' is one
such program.

The following examples show how to use the *Note `mysql': mysql. client
program to set up new accounts.  These examples assume that privileges
have been set up according to the defaults described in *Note
default-privileges::.  This means that to make changes, you must
connect to the MySQL server as the MySQL `root' user, and the `root'
account must have the `INSERT' privilege for the `mysql' database and
the `RELOAD' administrative privilege.

As noted in the examples where appropriate, some of the statements will
fail if the server's SQL mode has been set to enable certain
restrictions. In particular, strict mode (`STRICT_TRANS_TABLES',
`STRICT_ALL_TABLES') and `NO_AUTO_CREATE_USER' will prevent the server
from accepting some of the statements. Workarounds are indicated for
these cases. For more information about SQL modes and their effect on
grant table manipulation, see *Note server-sql-mode::, and *Note
grant::.

First, use the *Note `mysql': mysql. program to connect to the server
as the MySQL `root' user:

     shell> mysql --user=root mysql

If you have assigned a password to the `root' account, you will also
need to supply a `--password' or `-p' option, both for this *Note
`mysql': mysql. command and for those later in this section.

After connecting to the server as `root', you can add new accounts. The
following statements use *Note `GRANT': grant. to set up four new
accounts:

     mysql> CREATE USER 'monty'@'localhost' IDENTIFIED BY 'some_pass';
     mysql> GRANT ALL PRIVILEGES ON *.* TO 'monty'@'localhost'
         ->     WITH GRANT OPTION;
     mysql> CREATE USER 'monty'@'%' IDENTIFIED BY 'some_pass';
     mysql> GRANT ALL PRIVILEGES ON *.* TO 'monty'@'%'
         ->     WITH GRANT OPTION;
     mysql> CREATE USER 'admin'@'localhost';
     mysql> GRANT RELOAD,PROCESS ON *.* TO 'admin'@'localhost';
     mysql> CREATE USER 'dummy'@'localhost';

The accounts created by these statements have the following properties:

   * Two of the accounts have a user name of `monty' and a password of
     `some_pass'. Both accounts are superuser accounts with full
     privileges to do anything. The `'monty'@'localhost'' account can
     be used only when connecting from the local host. The
     `'monty'@'%'' account uses the `'%'' wildcard for the host part,
     so it can be used to connect from any host.

     It is necessary to have both accounts for `monty' to be able to
     connect from anywhere as `monty'. Without the `localhost' account,
     the anonymous-user account for `localhost' that is created by
     *Note `mysql_install_db': mysql-install-db. would take precedence
     when `monty' connects from the local host. As a result, `monty'
     would be treated as an anonymous user. The reason for this is that
     the anonymous-user account has a more specific `Host' column value
     than the `'monty'@'%'' account and thus comes earlier in the
     `user' table sort order.  (`user' table sorting is discussed in
     *Note connection-access::.)

   * The `'admin'@'localhost'' account has no password. This account
     can be used only by `admin' to connect from the local host. It is
     granted the `RELOAD' and `PROCESS' administrative privileges.
     These privileges enable the `admin' user to execute the *Note
     `mysqladmin reload': mysqladmin, *Note `mysqladmin refresh':
     mysqladmin, and *Note `mysqladmin flush-XXX': mysqladmin.
     commands, as well as *Note `mysqladmin processlist': mysqladmin .
     No privileges are granted for accessing any databases. You could
     add such privileges later by issuing other *Note `GRANT': grant.
     statements.

   * The `'dummy'@'localhost'' account has no password. This account
     can be used only to connect from the local host. No privileges are
     granted. It is assumed that you will grant specific privileges to
     the account later.

The statements that create accounts with no password will fail if the
`NO_AUTO_CREATE_USER' SQL mode is enabled. To deal with this, use an
`IDENTIFIED BY' clause that specifies a nonempty password.

To check the privileges for an account, use *Note `SHOW GRANTS':
show-grants.:

     mysql> SHOW GRANTS FOR 'admin'@'localhost';
     +-----------------------------------------------------+
     | Grants for admin@localhost                          |
     +-----------------------------------------------------+
     | GRANT RELOAD, PROCESS ON *.* TO 'admin'@'localhost' |
     +-----------------------------------------------------+

As an alternative to *Note `CREATE USER': create-user.  and *Note
`GRANT': grant, you can create the same accounts directly by issuing
*Note `INSERT': insert.  statements and then telling the server to
reload the grant tables using *Note `FLUSH PRIVILEGES': flush.:

     shell> mysql --user=root mysql
     mysql> INSERT INTO user
         ->     VALUES('localhost','monty',PASSWORD('some_pass'),
         ->     'Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y');
     mysql> INSERT INTO user
         ->     VALUES('%','monty',PASSWORD('some_pass'),
         ->     'Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y',
         ->     'Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y',
         ->     '','','','',0,0,0,0);
     mysql> INSERT INTO user SET Host='localhost',User='admin',
         ->     Reload_priv='Y', Process_priv='Y';
     mysql> INSERT INTO user (Host,User,Password)
         ->     VALUES('localhost','dummy','');
     mysql> FLUSH PRIVILEGES;

When you create accounts with *Note `INSERT': insert, it is necessary
to use *Note `FLUSH PRIVILEGES': flush.  to tell the server to reload
the grant tables. Otherwise, the changes go unnoticed until you restart
the server. With *Note `CREATE USER': create-user, *Note `FLUSH
PRIVILEGES': flush.  is unnecessary.

The reason for using the `PASSWORD()' function with *Note `INSERT':
insert. is to encrypt the password. The *Note `CREATE USER':
create-user.  statement encrypts the password for you, so `PASSWORD()'
is unnecessary.

The `'Y'' values enable privileges for the accounts. Depending on your
MySQL version, you may have to use a different number of `'Y'' values
in the first two *Note `INSERT': insert. statements. The *Note
`INSERT': insert. statement for the `admin' account employs the more
readable extended *Note `INSERT': insert. syntax using `SET'.

In the *Note `INSERT': insert. statement for the `dummy' account, only
the `Host', `User', and `Password' columns in the `user' table row are
assigned values. None of the privilege columns are set explicitly, so
MySQL assigns them all the default value of `'N''. This is equivalent
to what *Note `CREATE USER': create-user. does.

If strict SQL mode is enabled, all columns that have no default value
must have a value specified. In this case, *Note `INSERT': insert.
statements must explicitly specify values for the `ssl_cipher',
`x509_issuer', and `x509_subject' columns.

To set up a superuser account, it is necessary only to insert a `user'
table row with all privilege columns set to `'Y''. The `user' table
privileges are global, so no entries in any of the other grant tables
are needed.

The next examples create three accounts and give them access to
specific databases. Each of them has a user name of `custom' and
password of `obscure'.

To create the accounts with *Note `CREATE USER': create-user. and *Note
`GRANT': grant, use the following statements:

     shell> mysql --user=root mysql
     mysql> CREATE USER 'custom'@'localhost' IDENTIFIED BY 'obscure';
     mysql> GRANT SELECT,INSERT,UPDATE,DELETE,CREATE,DROP
         ->     ON bankaccount.*
         ->     TO 'custom'@'localhost';
     mysql> CREATE USER 'custom'@'host47.example.com' IDENTIFIED BY 'obscure';
     mysql> GRANT SELECT,INSERT,UPDATE,DELETE,CREATE,DROP
         ->     ON expenses.*
         ->     TO 'custom'@'host47.example.com';
     mysql> CREATE USER 'custom'@'server.domain' IDENTIFIED BY 'obscure';
     mysql> GRANT SELECT,INSERT,UPDATE,DELETE,CREATE,DROP
         ->     ON customer.*
         ->     TO 'custom'@'server.domain';

The three accounts can be used as follows:

   * The first account can access the `bankaccount' database, but only
     from the local host.

   * The second account can access the `expenses' database, but only
     from the host `host47.example.com'.

   * The third account can access the `customer' database, but only
     from the host `server.domain'.

To set up the `custom' accounts without *Note `GRANT': grant, use *Note
`INSERT': insert. statements as follows to modify the grant tables
directly:

     shell> mysql --user=root mysql
     mysql> INSERT INTO user (Host,User,Password)
         ->     VALUES('localhost','custom',PASSWORD('obscure'));
     mysql> INSERT INTO user (Host,User,Password)
         ->     VALUES('host47.example.com','custom',PASSWORD('obscure'));
     mysql> INSERT INTO user (Host,User,Password)
         ->     VALUES('server.domain','custom',PASSWORD('obscure'));
     mysql> INSERT INTO db
         ->     (Host,Db,User,Select_priv,Insert_priv,
         ->     Update_priv,Delete_priv,Create_priv,Drop_priv)
         ->     VALUES('localhost','bankaccount','custom',
         ->     'Y','Y','Y','Y','Y','Y');
     mysql> INSERT INTO db
         ->     (Host,Db,User,Select_priv,Insert_priv,
         ->     Update_priv,Delete_priv,Create_priv,Drop_priv)
         ->     VALUES('host47.example.com','expenses','custom',
         ->     'Y','Y','Y','Y','Y','Y');
     mysql> INSERT INTO db
         ->     (Host,Db,User,Select_priv,Insert_priv,
         ->     Update_priv,Delete_priv,Create_priv,Drop_priv)
         ->     VALUES('server.domain','customer','custom',
         ->     'Y','Y','Y','Y','Y','Y');
     mysql> FLUSH PRIVILEGES;

The first three *Note `INSERT': insert. statements add `user' table
entries that permit the user `custom' to connect from the various hosts
with the given password, but grant no global privileges (all privileges
are set to the default value of `'N''). The next three *Note `INSERT':
insert. statements add `db' table entries that grant privileges to
`custom' for the `bankaccount', `expenses', and `customer' databases,
but only when accessed from the proper hosts. As usual when you modify
the grant tables directly, you must tell the server to reload them with
*Note `FLUSH PRIVILEGES': flush.  so that the privilege changes take
effect.

To create a user who has access from all machines in a given domain
(for example, `mydomain.com'), you can use the ``%'' wildcard character
in the host part of the account name:

     mysql> CREATE USER 'myname'@'%.mydomain.com' IDENTIFIED BY 'mypass';

To do the same thing by modifying the grant tables directly, do this:

     mysql> INSERT INTO user (Host,User,Password,...)
         ->     VALUES('%.mydomain.com','myname',PASSWORD('mypass'),...);
     mysql> FLUSH PRIVILEGES;


File: manual.info,  Node: removing-users,  Next: user-resources,  Prev: adding-users,  Up: user-account-management

6.3.3 Removing User Accounts
----------------------------

To remove an account, use the *Note `DROP USER': drop-user. statement,
which is described in *Note drop-user::.


File: manual.info,  Node: user-resources,  Next: assigning-passwords,  Prev: removing-users,  Up: user-account-management

6.3.4 Setting Account Resource Limits
-------------------------------------

One means of limiting use of MySQL server resources is to set the
global `max_user_connections' system variable to a nonzero value. This
limits the number of simultaneous connections that can be made by any
given account, but places no limits on what a client can do once
connected. In addition, setting `max_user_connections' does not enable
management of individual accounts. Both types of control are of
interest to many MySQL administrators, particularly those working for
Internet Service Providers.

In MySQL 5.5, you can limit use of the following server resources for
individual accounts:

   * The number of queries that an account can issue per hour

   * The number of updates that an account can issue per hour

   * The number of times an account can connect to the server per hour

   * The number of simultaneous connections to the server by an account

Any statement that a client can issue counts against the query limit
(unless its results are served from the query cache). Only statements
that modify databases or tables count against the update limit.

An `account' in this context corresponds to a row in the `mysql.user'
table. That is, a connection is assessed against the `User' and `Host'
values in the `user' table row that applies to the connection. For
example, an account `'usera'@'%.example.com'' corresponds to a row in
the `user' table that has `User' and `Host' values of `usera' and
`%.example.com', to permit `usera' to connect from any host in the
`example.com' domain. In this case, the server applies resource limits
in this row collectively to all connections by `usera' from any host in
the `example.com' domain because all such connections use the same
account.

Before MySQL 5.0.3, an `account' was assessed against the actual host
from which a user connects. This older method accounting may be
selected by starting the server with the `--old-style-user-limits'
option. In this case, if `usera' connects simultaneously from
`host1.example.com' and `host2.example.com', the server applies the
account resource limits separately to each connection. If `usera'
connects again from `host1.example.com', the server applies the limits
for that connection together with the existing connection from that
host.

To set resource limits for an account, use the *Note `GRANT': grant.
statement (see *Note grant::). Provide a `WITH' clause that names each
resource to be limited. The default value for each limit is zero (no
limit). For example, to create a new account that can access the
`customer' database, but only in a limited fashion, issue these
statements:

     mysql> CREATE USER 'francis'@'localhost' IDENTIFIED BY 'frank';
     mysql> GRANT ALL ON customer.* TO 'francis'@'localhost'
         ->     WITH MAX_QUERIES_PER_HOUR 20
         ->          MAX_UPDATES_PER_HOUR 10
         ->          MAX_CONNECTIONS_PER_HOUR 5
         ->          MAX_USER_CONNECTIONS 2;

The limit types need not all be named in the `WITH' clause, but those
named can be present in any order. The value for each per-hour limit
should be an integer representing a count per hour. For
`MAX_USER_CONNECTIONS', the limit is an integer representing the
maximum number of simultaneous connections by the account. If this
limit is set to zero, the global `max_user_connections' system variable
value determines the number of simultaneous connections.  If
`max_user_connections' is also zero, there is no limit for the account.

To modify existing limits for an account, use a *Note `GRANT USAGE':
grant.  statement at the global level (`ON *.*'). The following
statement changes the query limit for `francis' to 100:

     mysql> GRANT USAGE ON *.* TO 'francis'@'localhost'
         ->     WITH MAX_QUERIES_PER_HOUR 100;

The statement modifies only the limit value specified and leaves the
account otherwise unchanged.

To remove a limit, set its value to zero. For example, to remove the
limit on how many times per hour `francis' can connect, use this
statement:

     mysql> GRANT USAGE ON *.* TO 'francis'@'localhost'
         ->     WITH MAX_CONNECTIONS_PER_HOUR 0;

As mentioned previously, the simultaneous-connection limit for an
account is determined from the `MAX_USER_CONNECTIONS' limit and the
`max_user_connections' system variable. Suppose that the global
`max_user_connections' value is 10 and three accounts have resource
limits specified with *Note `GRANT': grant.:

     GRANT ... TO 'user1'@'localhost' WITH MAX_USER_CONNECTIONS 0;
     GRANT ... TO 'user2'@'localhost' WITH MAX_USER_CONNECTIONS 5;
     GRANT ... TO 'user3'@'localhost' WITH MAX_USER_CONNECTIONS 20;

`user1' has a connection limit of 10 (the global `max_user_connections'
value) because it has a zero `MAX_USER_CONNECTIONS' limit). `user2' and
`user3' have connection limits of 5 and 20, respectively, because they
have nonzero `MAX_USER_CONNECTIONS' limits.

The server stores resource limits for an account in the `user' table
row corresponding to the account.  The `max_questions', `max_updates',
and `max_connections' columns store the per-hour limits, and the
`max_user_connections' column stores the `MAX_USER_CONNECTIONS' limit.
(See *Note grant-table-structure::.)

Resource-use counting takes place when any account has a nonzero limit
placed on its use of any of the resources.

As the server runs, it counts the number of times each account uses
resources. If an account reaches its limit on number of connections
within the last hour, further connections for the account are rejected
until that hour is up. Similarly, if the account reaches its limit on
the number of queries or updates, further queries or updates are
rejected until the hour is up. In all such cases, an appropriate error
message is issued.

Resource counting is done per account, not per client. For example, if
your account has a query limit of 50, you cannot increase your limit to
100 by making two simultaneous client connections to the server.
Queries issued on both connections are counted together.

The current per-hour resource-use counts can be reset globally for all
accounts, or individually for a given account:

   * To reset the current counts to zero for all accounts, issue a
     *Note `FLUSH USER_RESOURCES': flush. statement. The counts also
     can be reset by reloading the grant tables (for example, with a
     *Note `FLUSH PRIVILEGES': flush. statement or a *Note `mysqladmin
     reload': mysqladmin. command).

   * The counts for an individual account can be set to zero by
     re-granting it any of its limits. To do this, use *Note `GRANT
     USAGE': grant.  as described earlier and specify a limit value
     equal to the value that the account currently has.

Counter resets do not affect the `MAX_USER_CONNECTIONS' limit.

All counts begin at zero when the server starts; counts are not carried
over through a restart.

For the `MAX_USER_CONNECTIONS' limit, an edge case can occur if the
account currently has open the maximum number of connections permitted
to it: A disconnect followed quickly by a connect can result in an error
(`ER_TOO_MANY_USER_CONNECTIONS' or `ER_USER_LIMIT_REACHED') if the
server has not fully processed the disconnect by the time the connect
occurs. When the server finishes disconnect processing, another
connection will once more be permitted.


File: manual.info,  Node: assigning-passwords,  Next: pluggable-authentication,  Prev: user-resources,  Up: user-account-management

6.3.5 Assigning Account Passwords
---------------------------------

Required credentials for clients that connect to the MySQL server can
include a password. This section describes how to assign passwords for
MySQL accounts. In MySQL 5.5, it is also possible for clients to
authenticate using plugins. For information, see *Note
pluggable-authentication::.

To assign a password when you create a new account with *Note `CREATE
USER': create-user, include an `IDENTIFIED BY' clause:

     mysql> CREATE USER 'jeffrey'@'localhost'
         -> IDENTIFIED BY 'mypass';

To assign or change a password for an existing account, one way is to
issue a *Note `SET PASSWORD': set-password. statement:

     mysql> SET PASSWORD FOR
         -> 'jeffrey'@'localhost' = PASSWORD('mypass');

MySQL stores passwords in the `user' table in the `mysql' database.
Only users such as `root' that have update access to the `mysql'
database can change the password for other users. If you are not
connected as an anonymous user, you can change your own password by
omitting the `FOR' clause:

     mysql> SET PASSWORD = PASSWORD('mypass');

The `old_passwords' system variable value determines the hashing method
used by `PASSWORD()'. If you specify the password using that function
and *Note `SET PASSWORD': set-password. rejects the password as not
being in the correct format, it may be necessary to set `old_passwords'
to change the hashing method. For descriptions of the permitted values,
see *Note server-system-variables::.

In MySQL 5.5, enabling the `read_only' system variable prevents the use
of the *Note `SET PASSWORD': set-password. statement by any user not
having the `SUPER' privilege.

You can also use a *Note `GRANT USAGE': grant. statement at the global
level (`ON *.*') to assign a password to an account without affecting
the account's current privileges:

     mysql> GRANT USAGE ON *.* TO 'jeffrey'@'localhost'
         -> IDENTIFIED BY 'mypass';

To assign a password from the command line, use the *Note `mysqladmin':
mysqladmin. command:

     shell> mysqladmin -u USER_NAME -h HOST_NAME password "NEWPWD"

The account for which this command sets the password is the one with a
`user' table row that matches USER_NAME in the `User' column and the
client host _from which you connect_ in the `Host' column.

During authentication when a client connects to the server, MySQL
treats the password in the `user' table as an encrypted hash value (the
value that `PASSWORD()' would return for the password). When assigning
a password to an account, it is important to store an encrypted value,
not the plaintext password.  Use the following guidelines:

   * When you assign a password using *Note `CREATE USER': create-user,
     *Note `GRANT': grant. with an `IDENTIFIED BY' clause, or the *Note
     `mysqladmin password': mysqladmin. command, they encrypt the
     password for you. Specify the literal plaintext password:

          mysql> CREATE USER 'jeffrey'@'localhost'
              -> IDENTIFIED BY 'mypass';

   * For *Note `CREATE USER': create-user. or *Note `GRANT': grant, you
     can avoid sending the plaintext password if you know the hash
     value that `PASSWORD()' would return for the password. Specify the
     hash value preceded by the keyword `PASSWORD':

          mysql> CREATE USER 'jeffrey'@'localhost'
              -> IDENTIFIED BY PASSWORD '*90E462C37378CED12064BB3388827D2BA3A9B689';

   * When you assign an account a nonempty password using *Note `SET
     PASSWORD': set-password, you must use the `PASSWORD()' function to
     encrypt the password, otherwise the password is stored as
     plaintext.  Suppose that you assign a password like this:

          mysql> SET PASSWORD FOR
              -> 'jeffrey'@'localhost' = 'mypass';

     The result is that the literal value `'mypass'' is stored as the
     password in the `user' table, not the encrypted value. When
     `jeffrey' attempts to connect to the server using this password,
     the value is encrypted and compared to the value stored in the
     `user' table.  However, the stored value is the literal string
     `'mypass'', so the comparison fails and the server rejects the
     connection with an `Access denied' error.

*Note*:

`PASSWORD()' encryption differs from Unix password encryption. See
*Note user-names::.

It is preferable to assign passwords using *Note `SET PASSWORD':
set-password, *Note `GRANT': grant, or *Note `mysqladmin': mysqladmin,
but it is also possible to modify the `user' table directly. In this
case, you must also use *Note `FLUSH PRIVILEGES': flush. to cause the
server to reread the grant tables. Otherwise, the change remains
unnoticed by the server until you restart it.

   * To establish a password for a new account, provide a value for the
     `Password' column:

          mysql> INSERT INTO mysql.user (Host,User,Password)
              -> VALUES('localhost','jeffrey',PASSWORD('mypass'));
          mysql> FLUSH PRIVILEGES;

   * To change the password for an existing account, use *Note
     `UPDATE': update. to set the `Password' column value:

          mysql> UPDATE mysql.user SET Password = PASSWORD('bagel')
              -> WHERE Host = 'localhost' AND User = 'francis';
          mysql> FLUSH PRIVILEGES;


File: manual.info,  Node: pluggable-authentication,  Next: proxy-users,  Prev: assigning-passwords,  Up: user-account-management

6.3.6 Pluggable Authentication
------------------------------

* Menu:

* authentication-plugin-use::    Authentication Plugin Usage Instructions
* native-authentication-plugin::  The Native Authentication Plugin
* old-native-authentication-plugin::  The `Old' Native Authentication Plugin
* pam-authentication-plugin::    The PAM Authentication Plugin
* windows-authentication-plugin::  The Windows Native Authentication Plugin
* cleartext-authentication-plugin::  The Cleartext Client-Side Authentication Plugin
* socket-authentication-plugin::  The Socket Peer-Credential Authentication Plugin
* test-authentication-plugin::   The Test Authentication Plugin

When a client connects to the MySQL server, the server uses the user
name provided by the client and the client host to select the
appropriate account row from the `mysql.user' table. The server then
consults this row to authenticate the client.

Before MySQL 5.5.7, the server authenticates the password provided by
the client against the `Password' column of the account row.

As of MySQL 5.5.7, the server authenticates clients using a plugin.
Selection of the proper account row from the `mysql.user' table is
based on the user name and client host, as before, but the server
authenticates the client credentials as follows:

   * The server determines from the account row which authentication
     plugin applies for the client:

        * If the account row specifies no plugin name, the server uses
          native authentication; that is, authentication against the
          password stored in the `Password' column of the account row.
          This is the same authentication method provided by MySQL
          servers older than 5.5.7, before pluggable authentication was
          implemented.

        * If the account row specifies a plugin, the server invokes it
          to authenticate the user. If the server cannot find the
          plugin, an error occurs.

   * The plugin returns a status to the server indicating whether the
     user is permitted to connect.

Pluggable authentication enables two important capabilities:

   * *External authentication:* Pluggable authentication makes it
     possible for clients to connect to the MySQL server with
     credentials that are appropriate for authentication methods other
     than native authentication based on passwords stored in the
     `mysql.user' table. For example, plugins can be created to use
     external authentication methods such as PAM, Windows login IDs,
     LDAP, or Kerberos.

   * *Proxy users:* If a user is permitted to connect, an
     authentication plugin can return to the server a user name
     different from the name of the connecting user, to indicate that
     the connecting user is a proxy for another user. While the
     connection lasts, the proxy user is treated, for purposes of
     access control, as having the privileges of a different user. In
     effect, one user impersonates another. For more information, see
     *Note proxy-users::.

Several authentication plugins are available in MySQL:

   * Plugins that perform native authentication that matches the
     password against the `Password' column of the account row. The
     `mysql_native_password' plugin implements authentication based on
     the native password hashing method. The `mysql_old_password'
     plugin implements native authentication based on the older
     (pre-4.1) password hashing method. See *Note
     native-authentication-plugin::, and *Note
     old-native-authentication-plugin::. Native authentication using
     `mysql_native_password' is the default for accounts that have no
     plugin named explicitly in their account row.

   * A plugin that performs external authentication against PAM
     (Pluggable Authentication Modules), enabling MySQL Server to use
     PAM to authenticate MySQL users. This plugin supports proxy users
     as well. See *Note pam-authentication-plugin::.

   * A plugin that performs external authentication on Windows,
     enabling MySQL Server to use native Windows services to
     authenticate client connections. Users who have logged in to
     Windows can connect from MySQL client programs to the server based
     on the information in their environment without specifying an
     additional password. This plugin supports proxy users as well. See
     *Note windows-authentication-plugin::.

   * A client-side plugin that sends the password to the server without
     hashing or encryption. This plugin can be used by server-side
     plugins that require access to the password exactly as provided by
     the client user. See *Note cleartext-authentication-plugin::.

   * A plugin that authenticates clients that connect from the local
     host through the Unix socket file. See *Note
     socket-authentication-plugin::.

   * A test plugin that authenticates using MySQL native
     authentication. This plugin is intended for testing and
     development purposes, and as an example of how to write an
     authentication plugin. See *Note test-authentication-plugin::.

For general information about how to use authentication plugins, see
*Note authentication-plugin-use::.

*Note*:

For information about current restrictions on the use of pluggable
authentication, including which connectors support which plugins, see
*Note pluggable-authentication-restrictions::.

Third-party connector developers should read that section to determine
the extent to which a connector can take advantage of pluggable
authentication capabilities and what steps to take to become more
compliant.

If you are interested in writing your own authentication plugins, see
*Note writing-authentication-plugins::.


File: manual.info,  Node: authentication-plugin-use,  Next: native-authentication-plugin,  Prev: pluggable-authentication,  Up: pluggable-authentication

6.3.6.1 Authentication Plugin Usage Instructions
................................................

This section provides general instructions for installing and using
authentication plugins.

In general, pluggable authentication uses corresponding plugins on the
server and client sides, so you use a given authentication method like
this:

   * On the server host, install the library containing the appropriate
     server plugin, if necessary, so that the server can use it to
     authenticate client connections. Similarly, on each client host,
     install the library containing the appropriate client plugin for
     use by client programs.

   * Create MySQL accounts that specify use of the plugin for
     authentication.

   * When a client connects, the server plugin tells the client program
     which client plugin to use for authentication.

The instructions here use an an example authentication plugin included
in MySQL distributions (see *Note test-authentication-plugin::). The
procedure is similar for other authentication plugins; substitute the
appropriate plugin and file names.

The example authentication plugin has these characteristics:

   * The server-side plugin name is `test_plugin_server'.

   * The client-side plugin name is `auth_test_plugin'.

   * Both plugins are located in the shared library object file named
     `auth_test_plugin.so' in the plugin directory (the directory named
     by the `plugin_dir' system variable). The file name suffix might
     differ on your system.

Install and use the example authentication plugin as follows:

  1. Make sure that the plugin library is installed on the server and
     client hosts.

  2. Install the server-side test plugin at server startup or at
     runtime:

        * To install the plugin at startup, use the `--plugin-load'
          option.  With this plugin-loading method, the option must be
          given each time you start the server. For example, use these
          lines in a `my.cnf' option file:

               [mysqld]
               plugin-load=test_plugin_server=auth_test_plugin.so

        * To install the plugin at runtime, use the *Note `INSTALL
          PLUGIN': install-plugin. statement:

               mysql> INSTALL PLUGIN test_plugin_server SONAME 'auth_test_plugin.so';

          This installs the plugin permanently and need be done only
          once.

  3. Verify that the plugin is installed. For example, use *Note `SHOW
     PLUGINS': show-plugins.:

          mysql> SHOW PLUGINS\G
          ...
          *************************** 21. row ***************************
             Name: test_plugin_server
           Status: ACTIVE
             Type: AUTHENTICATION
          Library: auth_test_plugin.so
          License: GPL

     For other ways to check the plugin, see *Note
     obtaining-plugin-information::.

  4. To specify that a MySQL user must be authenticated using a
     specific server plugin, name the plugin in the `IDENTIFIED WITH'
     clause of the *Note `CREATE USER': create-user. statement that
     creates the user:

          CREATE USER 'testuser'@'localhost' IDENTIFIED WITH test_plugin_server;

  5. Connect to the server using a client program. The test plugin
     authenticates the same way as native MySQL authentication, so
     provide the usual `--user' and `--password' options that you
     normally use to connect to the server. For example:

          shell> mysql --user=YOUR_NAME --password=YOUR_PASS

     For connections by `testuser', the server sees that the account
     must be authenticated using the server-side plugin named
     `test_plugin_server' and communicates to the client program which
     client-side plugin it must use--in this case, `auth_test_plugin'.

     In the case that the account uses the authentication method that
     is the default for both the server and the client program, the
     server need not communicate to the client which plugin to use, and
     a round trip in client/server negotiation can be avoided.
     Currently this is true for accounts that use native MySQL
     authentication (`mysql_native_password').

     The `--default-auth=PLUGIN_NAME' option can be specified on the
     *Note `mysql': mysql.  command line to make explicit which
     client-side plugin the program can expect to use, although the
     server will override this if the user account requires a different
     plugin.

     If the client program does not find the plugin, specify a
     `--plugin-dir=DIR_NAME' option to indicate where the plugin is
     located.

*Note*:

If you start the server with the `--skip-grant-tables' option,
authentication plugins are not used even if loaded because the server
performs no client authentication and permits any client to connect.
Because this is insecure, you might want to use `--skip-grant-tables' in
conjunction with `--skip-networking' to prevent remote clients from
connecting.


File: manual.info,  Node: native-authentication-plugin,  Next: old-native-authentication-plugin,  Prev: authentication-plugin-use,  Up: pluggable-authentication

6.3.6.2 The Native Authentication Plugin
........................................

MySQL includes two plugins that implement native authentication; that
is, authentication against passwords stored in the `Password' column of
the `mysql.user' table. This section describes `mysql_native_password',
which implements authentication against the `mysql.user' table using
the native password hashing method. For information about
`mysql_old_password', which implements authentication using the older
(pre-4.1) password hashing method, see *Note
old-native-authentication-plugin::.  For information about these
password hashing methods, see *Note password-hashing::.

The `mysql_native_password' native authentication plugin is backward
compatible. Clients older than MySQL 5.5.7 do not support authentication
_plugins_ but do use the native authentication _protocol_, so they can
connect to servers from MySQL 5.5.7 and up.

The following table shows the plugin names on the server and client
sides.

*MySQL Native Password Authentication Plugin*

Server-side plugin     `mysql_native_password'
name                   
Client-side plugin     `mysql_native_password'
name                   
Library object file    None (plugins are built in)
name                   

The plugin exists in both client and server form:

   * The server-side plugin is built into the server, need not be
     loaded explicitly, and cannot be disabled by unloading it.

   * The client-side plugin is built into the `libmysqlclient' client
     library as of MySQL 5.5.7 and available to any program linked
     against `libmysqlclient' from that version or newer.

   * MySQL client programs use `mysql_native_password' by default. The
     `--default-auth' option can be used to specify the plugin
     explicitly:

          shell> mysql --default-auth=mysql_native_password ...

For general information about pluggable authentication in MySQL, see
*Note pluggable-authentication::.


File: manual.info,  Node: old-native-authentication-plugin,  Next: pam-authentication-plugin,  Prev: native-authentication-plugin,  Up: pluggable-authentication

6.3.6.3 The `Old' Native Authentication Plugin
..............................................

MySQL includes two plugins that implement native authentication; that
is, authentication against passwords stored in the `Password' column of
the `mysql.user' table. This section describes `mysql_old_password',
which implements authentication against the `mysql.user' table using
the older (pre-4.1) password hashing method. For information about
`mysql_native_password', which implements authentication using the
native password hashing method, see *Note
old-native-authentication-plugin::. For information about these
password hashing methods, see *Note password-hashing::.

*Note*:

Passwords that use the pre-4.1 hashing method are less secure than
passwords that use the native password hashing method and should be
avoided.

The `mysql_old_password' native authentication plugin is backward
compatible. Clients older than MySQL 5.5.7 do not support
authentication _plugins_ but do use the native authentication
_protocol_, so they can connect to servers from MySQL 5.5.7 and up.

The following table shows the plugin names on the server and client
sides.

*MySQL `Old' Native Authentication Plugin*

Server-side plugin     `mysql_old_password'
name                   
Client-side plugin     `mysql_old_password'
name                   
Library object file    None (plugins are built in)
name                   

The plugin exists in both client and server form:

   * The server-side plugin is built into the server, need not be
     loaded explicitly, and cannot be disabled by unloading it.

   * The client-side plugin is built into the `libmysqlclient' client
     library as of MySQL 5.5.7 and available to any program linked
     against `libmysqlclient' from that version or newer.

   * MySQL client programs can use the `--default-auth' option to
     specify the `mysql_old_password' plugin explicitly:

          shell> mysql --default-auth=mysql_old_password ...


For general information about pluggable authentication in MySQL, see
*Note pluggable-authentication::.


File: manual.info,  Node: pam-authentication-plugin,  Next: windows-authentication-plugin,  Prev: old-native-authentication-plugin,  Up: pluggable-authentication

6.3.6.4 The PAM Authentication Plugin
.....................................

* Menu:

* pam-authentication-plugin-installation::  Installing the PAM Authentication Plugin
* pam-authentication-plugin-usage::  Using the PAM Authentication Plugin
* pam-authentication-plugin-debugging::  PAM Authentication Plugin Debugging

*Note*:

The PAM authentication plugin is a commercial extension. To learn more
about commercial products (MySQL Enterprise Edition), see
http://www.mysql.com/products/.

As of MySQL 5.5.16, commercial distributions of MySQL include an
authentication plugin that enables MySQL Server to use PAM (Pluggable
Authentication Modules) to authenticate MySQL users.  PAM enables a
system to use a standard interface to access various kinds of
authentication methods, such as Unix passwords or an LDAP directory.

The PAM plugin uses the information passed to it by MySQL Server (such
as user name, host name, password, and authentication string), plus
whatever method is available for PAM lookup. The plugin checks the user
credentials against PAM and returns `'Authentication succeeded,
Username is USER_NAME'' or `'Authentication failed''.

The PAM authentication plugin provides these capabilities:

   * External authentication: The plugin enables MySQL Server to accept
     connections from users defined outside the MySQL grant tables.

   * Proxy user support: The plugin can return to MySQL a user name
     different from the login user, based on the groups the external
     user is in and the authentication string provided.  This means
     that the plugin can return the MySQL user that defines the
     privileges the external PAM-authenticated user should have. For
     example, a PAM user named `joe' can connect and have the privileges
     of the MySQL user named `developer'.

The following table shows the plugin and library file names. The file
name suffix might be different on your system. The file location must
be the directory named by the `plugin_dir' system variable. For
installation information, see *Note
pam-authentication-plugin-installation::.

*MySQL PAM Authentication Plugin*

Server-side plugin     `authentication_pam'
name                   
Client-side plugin     `mysql_clear_password'
name                   
Library object file    `authentication_pam.so'
name                   

The library file includes only the server-side plugin. As of MySQL
5.5.10, the client-side plugin is built into the `libmysqlclient'
client library. See *Note cleartext-authentication-plugin::.

The server-side PAM authentication plugin is included only in
commercial distributions. It is not included in MySQL community
distributions. The client-side clear-text plugin that communicates with
the server-side plugin is built into the MySQL client library and is
included in all distributions, including community distributions. This
permits clients from any 5.5.10 or newer distribution to connect to a
server that has the server-side plugin loaded.

The PAM authentication plugin has been tested on Linux and Mac OS X. It
requires MySQL Server 5.5.16 or newer.

For general information about pluggable authentication in MySQL, see
*Note pluggable-authentication::. For proxy user information, see *Note
proxy-users::.


File: manual.info,  Node: pam-authentication-plugin-installation,  Next: pam-authentication-plugin-usage,  Prev: pam-authentication-plugin,  Up: pam-authentication-plugin

6.3.6.5 Installing the PAM Authentication Plugin
................................................

The PAM authentication plugin must be located in the MySQL plugin
directory (the directory named by the `plugin_dir' system variable).
If necessary, set the value of `plugin_dir' at server startup to tell
the server the location of the plugin directory.

To enable the plugin, start the server with the `--plugin-load' option.
For example, put the following lines in your `my.cnf' file. If object
files have a suffix different from `.so' on your system, substitute the
correct suffix.

     [mysqld]
     plugin-load=authentication_pam.so

Use the plugin name `authentication_pam' in the `IDENTIFIED WITH'
clause of *Note `CREATE USER': create-user. or *Note `GRANT': grant.
statements for MySQL accounts that should be authenticated with this
plugin.

To verify plugin installation, examine the *Note
`INFORMATION_SCHEMA.PLUGINS': plugins-table. table or use the *Note
`SHOW PLUGINS': show-plugins.  statement. See *Note
obtaining-plugin-information::.


File: manual.info,  Node: pam-authentication-plugin-usage,  Next: pam-authentication-plugin-debugging,  Prev: pam-authentication-plugin-installation,  Up: pam-authentication-plugin

6.3.6.6 Using the PAM Authentication Plugin
...........................................

* Menu:

* pam-authentication-unix-without-proxy::  Unix Password Authentication without Proxy Users
* pam-authentication-ldap-without-proxy::  LDAP Authentication without Proxy Users
* pam-authentication-unix-with-proxy::  Unix Password Authentication with Proxy Users and Group Mapping

This section describes how to use the PAM authentication plugin to
connect from MySQL client programs to the server. It is assumed that
the server-side plugin is enabled and that client programs are recent
enough to include the client-side plugin.

*Note*:

The client-side plugin with which the PAM plugin communicates simply
sends the password to the server in clear text so it can be passed to
PAM. This may be a security problem in some configurations, but is
necessary to use the server-side PAM library. To avoid problems if there
is any possibility that the password would be intercepted, clients
should connect to MySQL Server using SSL. See *Note
cleartext-authentication-plugin::.

To refer to the PAM authentication plugin in the `IDENTIFIED WITH'
clause of a *Note `CREATE USER': create-user. or *Note `GRANT': grant.
statement, use the name `authentication_pam'. For example:

     CREATE USER USER
       IDENTIFIED WITH authentication_pam
       AS 'AUTHENTICATION_STRING';

The authentication string specifies the following types of information:

   * PAM supports the notion of `service name,' which is a name that
     the system administrator can use to configure the authentication
     method for a particular application. There can be several such
     `applications' associated with a single database server instance,
     so the choice of service name is left to the SQL application
     developer. When you define an account that should authenticate
     using PAM, specify the service name in the authentication string.

   * PAM provides a way for a PAM module to return to the server a
     MySQL user name other than the login name supplied at login time.
     Use the authentication string to control the mapping between login
     name and MySQL user name. If you want to take advantage of proxy
     user capabilities, the authentication string must include this
     kind of mapping.

For example, if the service name is `mysql' and users in the `root' and
`users' PAM groups should be mapped to the `developer' and `data_entry'
users, respectively, use a statement like this:

     CREATE USER USER
       IDENTIFIED WITH authentication_pam
       AS 'mysql, root=developer, users=data_entry';

Authentication string syntax for the PAM authentication plugin follows
these rules:

   * The string consists of a PAM service name, optionally followed by
     a group mapping list consisting of one or more keyword/value pairs
     each specifying a group name and a SQL user name:

          PAM_SERVICE_NAME[,GROUP_NAME=SQL_USER_NAME]...

   * Each `GROUP_NAME=SQL_USER_NAME' pair must be preceded by a comma.

   * Leading and trailing spaces not inside double quotation marks are
     ignored.

   * Unquoted PAM_SERVICE_NAME, GROUP_NAME, and SQL_USER_NAME values can
     contain anything except equal sign, comma, or space.

   * If a PAM_SERVICE_NAME, GROUP_NAME, or SQL_USER_NAME value is quoted
     with double quotation marks, everything between the quotation
     marks is part of the value. This is necessary, for example, if the
     value contains space characters. All characters are legal except
     double quotation mark and backslash (`'\''). To include either
     character, escape it with a backslash.

The plugin parses the authentication string on each login check. To
minimize overhead, keep the string as short as possible.

If the plugin successfully authenticates a login name, it looks for a
group mapping list in the authentication string and uses it to return a
different user name to the MySQL server based on the groups the
external user is a member of:

   * If the authentication string contains no group mapping list, the
     plugin returns the login name.

   * If the authentication string does contain a group mapping list,
     the plugin examines each `GROUP_NAME=SQL_USER_NAME' pair in the
     list from left to right and tries to find a match for the
     GROUP_NAME value in a non-MySQL directory of the groups assigned
     to the authenticated user and returns SQL_USER_NAME for the first
     match it finds. If the plugin finds no match for any group, it
     returns the login name. If the plugin is not capable of looking up
     a group in a directory, it ignores the group mapping list and
     returns the login name.

The following sections describe how to set up several authentication
scenarios that use the PAM authentication plugin:

   * No proxy users. This uses PAM only to check login names and
     passwords. Every external user permitted to connect to MySQL
     Server should have a matching MySQL account that is defined to use
     external PAM authentication. Authentication can be performed by
     various PAM-supported methods. The discussion shows how to use
     traditional Unix passwords and LDAP.

     PAM authentication, when not done through proxy users or groups,
     requires the MySQL account to have the same user name as the Unix
     account. Because MySQL user names are limited to 16 characters (see
     *Note grant-table-structure::), this limits PAM nonproxy
     authentication to Unix accounts with names of at most 16
     characters.

   * Proxy login only and group mapping. For this scenario, create a
     few MySQL accounts that define different sets of privileges.
     (Ideally, nobody should log in through these directly.) Then
     define a default user authenticating through PAM that uses some
     mapping scheme (usually by the external groups the users are in)
     to map all the external logins to the few MySQL accounts holding
     the privilege sets. Any user that logs in is mapped to one of the
     MySQL accounts and uses its privileges. The discussion shows how
     to set this up using Unix passwords, but other PAM methods such as
     LDAP could be used instead.

Variations on these scenarios are possible. For example, you can permit
some users to log in directly but require others to connect through
proxy users.

The examples make the following assumptions. You might need to make
some adjustments if your system is set up differently.

   * The PAM configuration directory is `/etc/pam.d'.

   * The PAM service name is `mysql', which means that you must set up
     a PAM file named `mysql' in the PAM configuration directory
     (creating the file if it does not exist). If you use a different
     service name, the file name will be different and you must use a
     different name in the `AS' clause of *Note `CREATE USER':
     create-user. and *Note `GRANT': grant. statements.

   * The examples use a login name of `antonio' and password of
     `verysecret'. Change these to correspond to the users you want to
     authenticate.

The PAM authentication plugin checks at initialization time whether the
`AUTHENTICATION_PAM_LOG' environment value is set. If so, the plugin
enables logging of diagnostic messages to the standard output. These
messages may be helpful for debugging PAM-related problems that occur
when the plugin performs authentication. For more information, see
*Note pam-authentication-plugin-debugging::.


File: manual.info,  Node: pam-authentication-unix-without-proxy,  Next: pam-authentication-ldap-without-proxy,  Prev: pam-authentication-plugin-usage,  Up: pam-authentication-plugin-usage

6.3.6.7 Unix Password Authentication without Proxy Users
........................................................

This authentication scenario uses PAM only to check Unix user login
names and passwords. Every external user permitted to connect to MySQL
Server should have a matching MySQL account that is defined to use
external PAM authentication.

  1. Verify that Unix authentication in PAM permits you to log in as
     `antonio' with password `verysecret'.

  2. Set up PAM to authenticate the `mysql' service. Put the following
     in `/etc/pam.d/mysql':

          #%PAM-1.0
          auth            include         password-auth
          account         include         password-auth

  3. Create a MySQL account with the same user name as the Unix login
     name and define it to authenticate using the PAM plugin:

          CREATE USER 'antonio'@'localhost'
            IDENTIFIED WITH authentication_pam AS 'mysql';
          GRANT ALL PRIVILEGES ON mydb.* TO 'antonio'@'localhost';

  4. Try to connect to the MySQL server using the *Note `mysql': mysql.
     command-line client. For example:

          mysql --user=antonio --password=verysecret mydb

     The server should permit the connection and the following query
     should return output as shown:

          mysql> SELECT USER(), CURRENT_USER(), @@proxy_user;
          +-------------------+-------------------+--------------+
          | USER()            | CURRENT_USER()    | @@proxy_user |
          +-------------------+-------------------+--------------+
          | antonio@localhost | antonio@localhost | NULL         |
          +-------------------+-------------------+--------------+

     This shows that `antonio' uses the privileges granted to the
     `antonio' MySQL account, and that no proxying has occurred.


File: manual.info,  Node: pam-authentication-ldap-without-proxy,  Next: pam-authentication-unix-with-proxy,  Prev: pam-authentication-unix-without-proxy,  Up: pam-authentication-plugin-usage

6.3.6.8 LDAP Authentication without Proxy Users
...............................................

This authentication scenario uses PAM only to check LDAP user login
names and passwords. Every external user permitted to connect to MySQL
Server should have a matching MySQL account that is defined to use
external PAM authentication.

  1. Verify that LDAP authentication in PAM permits you to log in as
     `antonio' with password `verysecret'.

  2. Set up PAM to authenticate the `mysql' service through LDAP. Put
     the following in `/etc/pam.d/mysql':

          #%PAM-1.0
          auth        required    pam_ldap.so
          account     required    pam_ldap.so

     If PAM object files have a suffix different from `.so' on your
     system, substitute the correct suffix.

  3. MySQL account creation and connecting to the server is the same as
     previously described in *Note
     pam-authentication-unix-without-proxy::.


File: manual.info,  Node: pam-authentication-unix-with-proxy,  Prev: pam-authentication-ldap-without-proxy,  Up: pam-authentication-plugin-usage

6.3.6.9 Unix Password Authentication with Proxy Users and Group Mapping
.......................................................................

This authentication scheme uses proxying and group mapping to map users
who connect to the MySQL server through PAM onto a few MySQL accounts
that define different sets of privileges. Users do not connect directly
through the accounts that define the privileges. Instead, they connect
through a default proxy user authenticating through PAM that uses a
mapping scheme to map all the external logins to the few MySQL accounts
holding the privileges. Any user who connects is mapped to one of the
MySQL accounts and uses its privileges.

The procedure shown here uses Unix password authentication.  To use
LDAP instead, see the early steps of *Note
pam-authentication-ldap-without-proxy::.

  1. Verify that Unix authentication in PAM permits you to log in as
     `antonio' with password `verysecret' and that `antonio' is a
     member of the `root' or `users' group.

  2. Set up PAM to authenticate the `mysql' service. Put the following
     in `/etc/pam.d/mysql':

          #%PAM-1.0
          auth            include         password-auth
          account         include         password-auth

  3. Create the default proxy user that maps the external PAM users to
     the proxied accounts. It maps external users from the `root' PAM
     group to the `developer' MySQL account and the external users from
     the `users' PAM group to the `data_entry' MySQL account:

          CREATE USER ''@''
            IDENTIFIED WITH authentication_pam
            AS 'mysql, root=developer, users=data_entry';

     The mapping list following the service name is required when you
     set up proxy users. Otherwise, the plugin cannot tell how to map
     the name of PAM groups to the proper proxied user name.

  4. Create the proxied accounts that will be used to access the
     databases:

          CREATE USER 'developer'@'localhost' IDENTIFIED BY 'VERY SECRET PASSWORD';
          GRANT ALL PRIVILEGES ON mydevdb.* TO 'developer'@'localhost';
          CREATE USER 'data_entry'@'localhost' IDENTIFIED BY 'VERY SECRET PASSWORD';
          GRANT ALL PRIVILEGES ON mydb.* TO 'data_entry'@'localhost';

     If you do not let anyone know the passwords for these accounts,
     other users cannot use them to connect directly to the MySQL
     server. Instead, it is expected that users will authenticate using
     PAM and that they will use the `developer' or `data_entry' account
     by proxy based on their PAM group.

  5. Grant the `PROXY' privilege to the proxy account for the proxied
     accounts:

          GRANT PROXY ON 'developer'@'localhost' TO ''@'';
          GRANT PROXY ON 'data_entry'@'localhost' TO ''@'';

  6. Try to connect to the MySQL server using the *Note `mysql': mysql.
     command-line client. For example:

          mysql --user=antonio --password=verysecret mydb

     The server authenticates the connection using the `''@''' account.
     The privileges `antonio' will have depends on what PAM groups he
     is a member of. If `antonio' is a member of the `root' PAM group,
     the PAM plugin maps `root' to the `developer' MySQL user name and
     returns that name to the server. The server verifies that `''@'''
     has the `PROXY' privilege for `developer' and permits the
     connection.  the following query should return output as shown:

          mysql> SELECT USER(), CURRENT_USER(), @@proxy_user;
          +-------------------+---------------------+--------------+
          | USER()            | CURRENT_USER()      | @@proxy_user |
          +-------------------+---------------------+--------------+
          | antonio@localhost | developer@localhost | ''@''        |
          +-------------------+---------------------+--------------+

     This shows that `antonio' uses the privileges granted to the
     `developer' MySQL account, and that proxying occurred through the
     default proxy user account.

     If `antonio' is not a member of the `root' PAM group but is a
     member of the `users' group, a similar process occurs, but the
     plugin maps `user' group membership to the `data_entry' MySQL user
     name and returns that name to the server. In this case, `antonio'
     uses the privileges of the `data_entry' MySQL account:

          mysql> SELECT USER(), CURRENT_USER(), @@proxy_user;
          +-------------------+----------------------+--------------+
          | USER()            | CURRENT_USER()       | @@proxy_user |
          +-------------------+----------------------+--------------+
          | antonio@localhost | data_entry@localhost | ''@''        |
          +-------------------+----------------------+--------------+


File: manual.info,  Node: pam-authentication-plugin-debugging,  Prev: pam-authentication-plugin-usage,  Up: pam-authentication-plugin

6.3.6.10 PAM Authentication Plugin Debugging
............................................

The PAM authentication plugin checks at initialization time whether the
`AUTHENTICATION_PAM_LOG' environment value is set (the value does not
matter). If so, the plugin enables logging of diagnostic messages to the
standard output. These messages may be helpful for debugging
PAM-related problems that occur when the plugin performs authentication.

Some messages include reference to PAM plugin source files and line
numbers, which enables plugin actions to be tied more closely to the
location in the code where they occur.

The following transcript demonstrates the kind of information produced
by enabling logging. It resulted from a successful proxy authentication
attempt.

     entering auth_pam_server
     entering auth_pam_next_token
     auth_pam_next_token:reading at [cups,admin=writer,everyone=reader], sep=[,]
     auth_pam_next_token:state=PRESPACE, ptr=[cups,admin=writer,everyone=reader],
     out=[]
     auth_pam_next_token:state=IDENT, ptr=[cups,admin=writer,everyone=reader],
     out=[]
     auth_pam_next_token:state=AFTERSPACE, ptr=[,admin=writer,everyone=reader],
     out=[cups]
     auth_pam_next_token:state=DELIMITER, ptr=[,admin=writer,everyone=reader],
     out=[cups]
     auth_pam_next_token:state=DONE, ptr=[,admin=writer,everyone=reader],
     out=[cups]
     leaving auth_pam_next_token on
     /Users/gkodinov/mysql/work/x-5.5.16-release-basket/release/plugin/pam-authentication-plugin/src/parser.c:191
     auth_pam_server:password 12345qq received
     auth_pam_server:pam_start rc=0
     auth_pam_server:pam_set_item(PAM_RUSER,gkodinov) rc=0
     auth_pam_server:pam_set_item(PAM_RHOST,localhost) rc=0
     entering auth_pam_server_conv
     auth_pam_server_conv:PAM_PROMPT_ECHO_OFF [Password:] received
     leaving auth_pam_server_conv on
     /Users/gkodinov/mysql/work/x-5.5.16-release-basket/release/plugin/pam-authentication-plugin/src/authentication_pam.c:257
     auth_pam_server:pam_authenticate rc=0
     auth_pam_server:pam_acct_mgmt rc=0
     auth_pam_server:pam_setcred(PAM_ESTABLISH_CRED) rc=0
     auth_pam_server:pam_get_item rc=0
     auth_pam_server:pam_setcred(PAM_DELETE_CRED) rc=0
     entering auth_pam_map_groups
     entering auth_pam_walk_namevalue_list
     auth_pam_walk_namevalue_list:reading at: [admin=writer,everyone=reader]
     entering auth_pam_next_token
     auth_pam_next_token:reading at [admin=writer,everyone=reader], sep=[=]
     auth_pam_next_token:state=PRESPACE, ptr=[admin=writer,everyone=reader], out=[]
     auth_pam_next_token:state=IDENT, ptr=[admin=writer,everyone=reader], out=[]
     auth_pam_next_token:state=AFTERSPACE, ptr=[=writer,everyone=reader],
     out=[admin]
     auth_pam_next_token:state=DELIMITER, ptr=[=writer,everyone=reader],
     out=[admin]
     auth_pam_next_token:state=DONE, ptr=[=writer,everyone=reader], out=[admin]
     leaving auth_pam_next_token on
     /Users/gkodinov/mysql/work/x-5.5.16-release-basket/release/plugin/pam-authentication-plugin/src/parser.c:191
     auth_pam_walk_namevalue_list:name=[admin]
     entering auth_pam_next_token
     auth_pam_next_token:reading at [writer,everyone=reader], sep=[,]
     auth_pam_next_token:state=PRESPACE, ptr=[writer,everyone=reader], out=[]
     auth_pam_next_token:state=IDENT, ptr=[writer,everyone=reader], out=[]
     auth_pam_next_token:state=AFTERSPACE, ptr=[,everyone=reader], out=[writer]
     auth_pam_next_token:state=DELIMITER, ptr=[,everyone=reader], out=[writer]
     auth_pam_next_token:state=DONE, ptr=[,everyone=reader], out=[writer]
     leaving auth_pam_next_token on
     /Users/gkodinov/mysql/work/x-5.5.16-release-basket/release/plugin/pam-authentication-plugin/src/parser.c:191
     walk, &error_namevalue_list:value=[writer]
     entering auth_pam_map_group_to_user
     auth_pam_map_group_to_user:pam_user=gkodinov, name=admin, value=writer
     examining member root
     examining member gkodinov
     substitution was made to mysql user writer
     leaving auth_pam_map_group_to_user on
     /Users/gkodinov/mysql/work/x-5.5.16-release-basket/release/plugin/pam-authentication-plugin/src/authentication_pam.c:118
     auth_pam_walk_namevalue_list:found mapping
     leaving auth_pam_walk_namevalue_list on
     /Users/gkodinov/mysql/work/x-5.5.16-release-basket/release/plugin/pam-authentication-plugin/src/parser.c:270
     auth_pam_walk_namevalue_list returned 0
     leaving auth_pam_map_groups on
     /Users/gkodinov/mysql/work/x-5.5.16-release-basket/release/plugin/pam-authentication-plugin/src/authentication_pam.c:171
     auth_pam_server:authenticated_as=writer
     auth_pam_server: rc=0
     leaving auth_pam_server on
     /Users/gkodinov/mysql/work/x-5.5.16-release-basket/release/plugin/pam-authentication-plugin/src/authentication_pam.c:429


File: manual.info,  Node: windows-authentication-plugin,  Next: cleartext-authentication-plugin,  Prev: pam-authentication-plugin,  Up: pluggable-authentication

6.3.6.11 The Windows Native Authentication Plugin
.................................................

* Menu:

* windows-authentication-plugin-installation::  Installing the Windows Authentication Plugin
* windows-authentication-plugin-usage::  Using the Windows Authentication Plugin

*Note*:

The Windows authentication plugin is a commercial extension.  To learn
more about commercial products (MySQL Enterprise Edition), see
http://www.mysql.com/products/.

As of MySQL 5.5.16, commercial distributions of MySQL for Windows
include an authentication plugin that performs external authentication
on Windows, enabling MySQL Server to use native Windows services to
authenticate client connections. Users who have logged in to Windows
can connect from MySQL client programs to the server based on the
information in their environment without specifying an additional
password.

The client and server exchange data packets in the authentication
handshake. As a result of this exchange, the server creates a security
context object that represents the identity of the client in the
Windows OS. This identity includes the name of the client account. The
Windows authentication plugin uses the identity of the client to check
whether it is a given account or a member of a group. By default,
negotiation uses Kerberos to authenticate, then NTLM if Kerberos is
unavailable.

The Windows authentication plugin provides these capabilities:

   * External authentication: The plugin enables MySQL Server to accept
     connections from users defined outside the MySQL grant tables.

   * Proxy user support: The plugin can return to MySQL a user name
     different from the client user. This means that the plugin can
     return the MySQL user that defines the privileges the external
     Windows-authenticated user should have. For example, a Windows
     user named `joe' can connect and have the privileges of the MySQL
     user named `developer'.

The following table shows the plugin and library file names. The file
location must be the directory named by the `plugin_dir' system
variable. For installation information, see *Note
windows-authentication-plugin-installation::.

*MySQL Windows Authentication Plugin*

Server-side plugin     `authentication_windows'
name                   
Client-side plugin     `authentication_windows_client'
name                   
Library object file    `authentication_windows.dll'
name                   

The library file includes only the server-side plugin. As of MySQL
5.5.13, the client-side plugin is built into the `libmysqlclient'
client library.

The server-side Windows authentication plugin is included only in
commercial distributions. It is not included in MySQL community
distributions. The client-side plugin is included in all distributions,
including community distributions. This permits clients from any 5.5.13
or newer distribution to connect to a server that has the server-side
plugin loaded.

The Windows authentication plugin is supported on any version of
Windows supported by MySQL 5.5 (see
http://www.mysql.com/support/supportedplatforms/database.html). It
requires MySQL Server 5.5.16 or newer.

For general information about pluggable authentication in MySQL, see
*Note pluggable-authentication::. For proxy user information, see *Note
proxy-users::.


File: manual.info,  Node: windows-authentication-plugin-installation,  Next: windows-authentication-plugin-usage,  Prev: windows-authentication-plugin,  Up: windows-authentication-plugin

6.3.6.12 Installing the Windows Authentication Plugin
.....................................................

The Windows authentication plugin must be installed in the MySQL plugin
directory (the directory named by the `plugin_dir' system variable).
If necessary, set the value of `plugin_dir' at server startup to tell
the server the location of the plugin directory.

To enable the plugin, start the server with the `--plugin-load' option.
For example, put these lines in your `my.ini' file:

     [mysqld]
     plugin-load=authentication_windows.dll

Use the plugin name `authentication_windows' in the `IDENTIFIED WITH'
clause of *Note `CREATE USER': create-user. or *Note `GRANT': grant.
statements for MySQL accounts that should be authenticated with this
plugin.

To verify plugin installation, examine the *Note
`INFORMATION_SCHEMA.PLUGINS': plugins-table. table or use the *Note
`SHOW PLUGINS': show-plugins.  statement. See *Note
obtaining-plugin-information::.


File: manual.info,  Node: windows-authentication-plugin-usage,  Prev: windows-authentication-plugin-installation,  Up: windows-authentication-plugin

6.3.6.13 Using the Windows Authentication Plugin
................................................

The Windows authentication plugin supports the use of MySQL accounts
such that users who have logged in to Windows can connect to the MySQL
server without having to specify an additional password. It is assumed
that the server-side plugin is enabled and that client programs are
recent enough to include the client-side plugin built into
`libmysqlclient' (MySQL 5.5.13 or higher).  Once the DBA has enabled
the server-side plugin and set up accounts to use it, clients can
connect using those accounts with no other setup required on their part.

To refer to the Windows authentication plugin in the `IDENTIFIED WITH'
clause of a *Note `CREATE USER': create-user. or *Note `GRANT': grant.
statement, use the name `authentication_windows'. Suppose that the
Windows users `Rafal' and `Tasha' should be permitted to connect to
MySQL, as well as any users in the `Administrators' or `Power Users'
group. To set this up, create a MySQL account named `sql_admin' that
uses the Windows plugin for authentication:

     CREATE USER sql_admin
       IDENTIFIED WITH authentication_windows
       AS 'Rafal, Tasha, Administrators, "Power Users"';

The plugin name is `authentication_windows'.  The string following the
`AS' keyword is the authentication string. It specifies that the
Windows users named `Rafal' or `Tasha' are permitted to authenticate to
the server as the MySQL user `sql_admin', as are any Windows users in
the `Administrators' or `Power Users' group. The latter group name
contains a space, so it must be quoted with double quote characters.

After you create the `sql_admin' account, a user who has logged in to
Windows can attempt to connect to the server using that account:

     C:\> mysql --user=sql_admin

No password is required here. The `authentication_windows' plugin uses
the Windows security API to check which Windows user is connecting. If
that user is named `Rafal' or `Tasha', or is in the `Administrators' or
`Power Users' group, the server grants access and the client is
authenticated as `sql_admin' and has whatever privileges are granted to
the `sql_admin' account. Otherwise, the server denies access.

Authentication string syntax for the Windows authentication plugin
follows these rules:

   * The string consists of one or more user mappings separated by
     commas.

   * Each user mapping associates a Windows user or group name with a
     MySQL user name:

          WIN_USER_OR_GROUP_NAME=SQL_USER_NAME
          WIN_USER_OR_GROUP_NAME

     For the latter syntax, with no SQL_USER_NAME value given, the
     implicit value is the MySQL user created by the *Note `CREATE
     USER': create-user. statement.  Thus, these statements are
     equivalent:

          CREATE USER sql_admin
            IDENTIFIED WITH authentication_windows
            AS 'Rafal, Tasha, Administrators, "Power Users"';

          CREATE USER sql_admin
            IDENTIFIED WITH authentication_windows
            AS 'Rafal=sql_admin, Tasha=sql_admin, Administrators=sql_admin,
                "Power Users"=sql_admin';

   * Each backslash (`'\'') in a value must be doubled because
     backslash is the escape character in MySQL strings.

   * Leading and trailing spaces not inside double quotation marks are
     ignored.

   * Unquoted WIN_USER_OR_GROUP_NAME and SQL_USER_NAME values can
     contain anything except equal sign, comma, or space.

   * If a WIN_USER_OR_GROUP_NAME and or SQL_USER_NAME value is quoted
     with double quotation marks, everything between the quotation
     marks is part of the value. This is necessary, for example, if the
     name contains space characters. All characters within double
     quotes are legal except double quotation mark and backslash. To
     include either character, escape it with a backslash.

   * WIN_USER_OR_GROUP_NAME values use conventional syntax for Windows
     principals, either local or in a domain. Examples (note the
     doubling of backslashes):

          domain\\user
          .\\user
          domain\\group
          .\\group
          BUILTIN\\WellKnownGroup

When invoked by the server to authenticate a client, the plugin scans
the authentication string left to right for a user or group match to
the Windows user. If there is a match, the plugin returns the
corresponding SQL_USER_NAME to the MySQL server.  If there is no match,
authentication fails.

A user name match takes preference over a group name match.  Suppose
that the Windows user named `win_user' is a member of `win_group' and
the authentication string looks like this:

     'win_group = sql_user1, win_user = sql_user2'

When `win_user' connects to the MySQL server, there is a match both to
`win_group' and to `win_user'. The plugin authenticates the user as
`sql_user2' because the more-specific user match takes precedence over
the group match, even though the group is listed first in the
authentication string.

Windows authentication always works for connections from the same
computer on which the server is running. For cross-computer
connections, both computers must be registered with Windows Active
Directory. If they are in the same Windows domain, it is unnecessary to
specify a domain name. It is also possible to permit connections from a
different domain, as in this example:

     CREATE USER sql_accounting
       IDENTIFIED WITH authentication_windows
       AS 'SomeDomain\\Accounting';

Here `SomeDomain' is the name of the other domain. The backslash
character is doubled because it is the MySQL escape character within
strings.

MySQL supports the concept of proxy users whereby a client can connect
and authenticate to the MySQL server using one account but while
connected has the privileges of another account (see *Note
proxy-users::). Suppose that you want Windows users to connect using a
single user name but be mapped based on their Windows user and group
names onto specific MySQL accounts as follows:

   * The `local_user' and `MyDomain\domain_user' local and domain
     Windows users should map to the `local_wlad' MySQL account.

   * Users in the `MyDomain\Developers' domain group should map to the
     `local_dev' MySQL account.

   * Local machine administrators should map to the `local_admin' MySQL
     account.

To set this up, create a proxy account for Windows users to connect to,
and configure this account so that users and groups map to the
appropriate MySQL accounts (`local_wlad', `local_dev', `local_admin').
In addition, grant the MySQL accounts the privileges appropriate to the
operations they need to perform. The following instructions use
`win_proxy' as the proxy account, and `local_wlad', `local_dev', and
`local_admin' as the proxied accounts.

  1. Create the proxy MySQL account:

          CREATE USER win_proxy
            IDENTIFIED WITH  authentication_windows
            AS 'local_user = local_wlad,
                MyDomain\\domain_user = local_wlad,
                MyDomain\\Developers = local_dev,
                BUILTIN\\Administrators = local_admin';

  2. For proxying to work, the proxied accounts must exist, so create
     them:

          CREATE USER local_wlad IDENTIFIED BY 'wlad_pass';
          CREATE USER local_dev IDENTIFIED BY 'dev_pass';
          CREATE USER local_admin IDENTIFIED BY  'admin_pass';

     If you do not let anyone know the passwords for these accounts,
     other users cannot use them to connect directly to the MySQL
     server.

     You should also issue *Note `GRANT': grant.  statements (not
     shown) that grant each proxied account the privileges it needs.

  3. The proxy account must have the `PROXY' privilege for each of the
     proxied accounts:

          GRANT PROXY ON local_wlad TO win_proxy;
          GRANT PROXY ON local_dev TO win_proxy;
          GRANT PROXY ON local_admin TO win_proxy;

Now the Windows users `local_user' and `MyDomain\domain_user' can
connect to the MySQL server as `win_proxy' and when authenticated have
the privileges of the account given in the authentication string--in
this case, `local_wlad'. A user in the `MyDomain\Developers' group who
connects as `win_proxy' has the privileges of the `local_dev' account.
A user in the `BUILTIN\Administrators' group has the privileges of the
`local_admin' account.

To configure authentication so that all Windows users who do not have
their own MySQL account go through a proxy account, substitute the
default proxy user (`''@''') for `win_proxy' in the preceding
instructions. For information about the default proxy user, see *Note
proxy-users::.

To use the Windows authentication plugin with Connector/Net connection
strings in Connection/Net 6.4.4 and higher, see *Note
connector-net-programming-authentication-windows-native::.

Additional control over the Windows authentication plugin is provided
by the `authentication_windows_use_principal_name' and
`authentication_windows_log_level' system variables. See *Note
server-system-variables::.


File: manual.info,  Node: cleartext-authentication-plugin,  Next: socket-authentication-plugin,  Prev: windows-authentication-plugin,  Up: pluggable-authentication

6.3.6.14 The Cleartext Client-Side Authentication Plugin
........................................................

As of MySQL 5.5.10, a client-side authentication plugin is available
that sends the password to the server without hashing or encryption.
This plugin is built into the MySQL client library.

The following table shows the plugin name.

*MySQL Cleartext Authentication Plugin*

Server-side plugin     None, see discussion
name                   
Client-side plugin     `mysql_clear_password'
name                   
Library object file    None (plugin is built in)
name                   

With native MySQL authentication, the client performs one-way hashing
on the password before sending it to the server. This enables the
client to avoid sending the password in clear text.  See *Note
password-hashing::. However, because the hash algorithm is one way, the
original password cannot be recovered on the server side.

One-way hashing cannot be done for authentication schemes that require
the server to receive the password as entered on the client side. In
such cases, the `mysql_clear_password' client-side plugin can be used
to send the password to the server in clear text. There is no
corresponding server-side plugin. Rather, the client-side plugin can be
used by any server-side plugin that needs a clear text password.

For general information about pluggable authentication in MySQL, see
*Note pluggable-authentication::.

*Note*:

Sending passwords in clear text may be a security problem in some
configurations. To avoid problems if there is any possibility that the
password would be intercepted, clients should connect to MySQL Server
using a method that protects the password. Possibilities include SSL
(see *Note ssl-connections::), IPsec, or a private network.

As of MySQL 5.5.27, to make inadvertent use of this plugin less likely,
it is required that clients explicitly enable it. This can be done
several ways:

   * Set the `LIBMYSQL_ENABLE_CLEARTEXT_PLUGIN' environment variable to
     a value that begins with `1', `Y', or `y'. This enables the plugin
     for all client connections.

   * The *Note `mysql': mysql, *Note `mysqladmin': mysqladmin, and
     *Note `mysqlslap': mysqlslap. client programs support an
     `--enable-cleartext-plugin' option that enables the plugin on a
     per-invocation basis.

   * The *Note `mysql_options()': mysql-options. C API function
     supports a `MYSQL_ENABLE_CLEARTEXT_PLUGIN' option that enables the
     plugin on a per-connection basis. Also, any program that uses
     `libmysqlclient' and reads option files can enable the plugin by
     including an `enable-cleartext-plugin' option in an option group
     read by the client library.


File: manual.info,  Node: socket-authentication-plugin,  Next: test-authentication-plugin,  Prev: cleartext-authentication-plugin,  Up: pluggable-authentication

6.3.6.15 The Socket Peer-Credential Authentication Plugin
.........................................................

As of MySQL 5.5.10, a server-side authentication plugin is available
that authenticates clients that connect from the local host through the
Unix socket file. This plugin works only on Linux systems.

The source code for this plugin can be examined as a relatively simple
example demonstrating how to write a loadable authentication plugin.

The following table shows the plugin and library file names. The file
name suffix might differ on your system. The file location is the
directory named by the `plugin_dir' system variable. For installation
information, see *Note pluggable-authentication::.

*MySQL Socket Peer-Credential Authentication Plugin*

Server-side plugin     `auth_socket'
name                   
Client-side plugin     None, see discussion
name                   
Library object file    `auth_socket.so'
name                   

The `auth_socket' authentication plugin authenticates clients that
connect from the local host through the Unix socket file. The plugin
uses the `SO_PEERCRED' socket option to obtain information about the
user running the client program. The plugin checks whether the user
name matches the MySQL user name specified by the client program to the
server, and permits the connection only if the names match. The plugin
can be built only on systems that support the `SO_PEERCRED' option,
such as Linux.

Suppose that a MySQL account is created for a user named `valerie' who
is to be authenticated by the `auth_socket' plugin for connections from
the local host through the socket file:

     CREATE USER 'valerie'@'localhost' IDENTIFIED WITH auth_socket;

If a user on the local host with a login name of `stefanie' invokes
*Note `mysql': mysql.  with the option `--user=valerie' to connect
through the socket file, the server uses `auth_socket' to authenticate
the client. The plugin determines that the `--user' option value
(`valerie') differs from the client user's name (`stephanie') and
refuses the connection. If a user named `valerie' tries the same thing,
the plugin finds that the user name and the MySQL user name are both
`valerie' and permits the connection. However, the plugin refuses the
connection even for `valerie' if the connection is made using a
different protocol, such as TCP/IP.

For general information about pluggable authentication in MySQL, see
*Note pluggable-authentication::.


File: manual.info,  Node: test-authentication-plugin,  Prev: socket-authentication-plugin,  Up: pluggable-authentication

6.3.6.16 The Test Authentication Plugin
.......................................

MySQL includes a test plugin that authenticates using MySQL native
authentication, but is a loadable plugin (not built in) and must be
installed prior to use. It can authenticate against either normal or
older (shorter) password hash values.

This plugin is intended for testing and development purposes, and not
for use in production environments. The test plugin source code is
separate from the server source, unlike the built-in native plugin, so
it can be examined as a relatively simple example demonstrating how to
write a loadable authentication plugin.

The following table shows the plugin and library file names. The file
name suffix might differ on your system. The file location is the
directory named by the `plugin_dir' system variable. For installation
information, see *Note pluggable-authentication::.

*MySQL Test Authentication Plugin*

Server-side plugin     `test_plugin_server'
name                   
Client-side plugin     `auth_test_plugin'
name                   
Library object file    `auth_test_plugin.so'
name                   

Because the test plugin authenticates the same way as native MySQL
authentication, provide the usual `--user' and `--password' options
that you normally use for accounts that use native authentication when
you connect to the server. For example:

     shell> mysql --user=YOUR_NAME --password=YOUR_PASS

For general information about pluggable authentication in MySQL, see
*Note pluggable-authentication::.


File: manual.info,  Node: proxy-users,  Next: ssl-connections,  Prev: pluggable-authentication,  Up: user-account-management

6.3.7 Proxy Users
-----------------

When authentication to the MySQL server occurs by means of an
authentication plugin, the plugin may request that the connecting
(external) user be treated as a different user for privilege-checking
purposes. This enables the external user to be a proxy for the second
user; that is, to have the privileges of the second user. In other
words, the external user is a `proxy user' (a user who can impersonate
or become known as another user) and the second user is a `proxied
user' (a user whose identity can be taken on by a proxy user).

This section describes how the proxy user capability works. For general
information about authentication plugins, see *Note
pluggable-authentication::. If you are interested in writing your own
authentication plugins that support proxy users, see *Note
writing-authentication-plugins-proxy-users::.

For proxying to occur, these conditions must be satisfied:

   * When a connecting client should be treated as a proxy user, the
     plugin must return a different name, to indicate the proxied user
     name.

   * A proxy user account must be set up to be authenticated by the
     plugin. Use the *Note `CREATE USER': create-user. or *Note
     `GRANT': grant. statement to associate an account with a plugin.

   * A proxy user account must have the `PROXY' privilege for the
     proxied account. Use the *Note `GRANT': grant.  statement for this.

Consider the following definitions:

     CREATE USER 'empl_external'@'localhost'
       IDENTIFIED WITH auth_plugin AS 'auth_string';
     CREATE USER 'employee'@'localhost'
       IDENTIFIED BY 'employee_pass';
     GRANT PROXY
       ON 'employee'@'localhost'
       TO 'empl_external'@'localhost';

When a client connects as `empl_external' from the local host, MySQL
uses `auth_plugin' to perform authentication. If `auth_plugin' returns
the `employee' user name to the server (based on the content of
`'auth_string'' and perhaps by consulting some external authentication
system), that serves as a request to the server to treat this client,
for purposes of privilege checking, as the `employee' local user.

In this case, `empl_external' is the proxy user and `employee' is the
proxied user.

The server verifies that proxy authentication for `employee' is
possible for the `empl_external' user by checking whether
`empl_external' has the `PROXY' privilege for `employee'. (If this
privilege had not been granted, an error would occur.)

When proxying occurs, the `USER()' and `CURRENT_USER()' functions can
be used to see the difference between the connecting user and the
account whose privileges apply during the current session. For the
example just described, those functions return these values:

     mysql> SELECT USER(), CURRENT_USER();
     +-------------------------+--------------------+
     | USER()                  | CURRENT_USER()     |
     +-------------------------+--------------------+
     | empl_external@localhost | employee@localhost |
     +-------------------------+--------------------+

The `IDENTIFIED WITH' clause that names the authentication plugin may
be followed by an `AS' clause specifying a string that the server
passes to the plugin when the user connects. It is up to each plugin
whether the `AS' clause is required. If it is required, the format of
the authentication string depends on how the plugin intends to use it.
Consult the documentation for a given plugin for information about the
authentication string values it accepts.

* Granting the Proxy Privilege *

A special `PROXY' privilege is needed to enable an external user to
connect as and have the privileges of another user. To grant this
privilege, use the *Note `GRANT': grant. statement. For example:

     GRANT PROXY ON 'PROXIED_USER' TO 'PROXY_USER';

PROXY_USER must represent a valid externally authenticated MySQL user
at connection time or connection attempts fail. PROXIED_USER must
represent a valid locally authenticated user at connection time or
connection attempts fail.

The corresponding *Note `REVOKE': revoke. syntax is:

     REVOKE PROXY ON 'PROXIED_USER' FROM 'PROXY_USER';

MySQL *Note `GRANT': grant. and *Note `REVOKE': revoke. syntax
extensions work as usual. For example:

     GRANT PROXY ON 'a' TO 'b', 'c', 'd';
     GRANT PROXY ON 'a' TO 'd' IDENTIFIED BY ...;
     GRANT PROXY ON 'a' TO 'd' WITH GRANT OPTION;
     GRANT PROXY ON 'a' TO ''@'';
     REVOKE PROXY ON 'a' FROM 'b', 'c', 'd';

In the preceding example, `''@''' is the default proxy user and means
`any user.' The default proxy user is discussed later in this section.

The `PROXY' privilege can be granted in these cases:

   * By PROXIED_USER for itself: The value of `USER()' must exactly
     match `CURRENT_USER()' and PROXIED_USER, for both the user name
     and host name parts of the account name.

   * By a user that has `GRANT PROXY ... WITH GRANT OPTION' for
     PROXIED_USER.

The `root' account created by default during MySQL installation has the
`PROXY ... WITH GRANT OPTION' privilege for `''@''', that is, for all
users. This enables `root' to set up proxy users, as well as to
delegate to other accounts the authority to set up proxy users. For
example, `root' can do this:

     CREATE USER 'admin'@'localhost' IDENTIFIED BY 'test';
     GRANT PROXY ON ''@'' TO 'admin'@'localhost' WITH GRANT OPTION;

Now the `admin' user can manage all the specific `GRANT PROXY'
mappings. For example, `admin' can do this:

     GRANT PROXY ON sally TO joe;

* Default Proxy Users *

To specify that some or all users should connect using a given external
plugin, create a `blank' MySQL user, set it up to use that plugin for
authentication, and let the plugin return the real authenticated user
name (if different from the blank user). For example, suppose that
there exists a hypothetical plugin named `ldap_auth' that implements
LDAP authentication:

     CREATE USER ''@'' IDENTIFIED WITH ldap_auth AS 'O=Oracle, OU=MySQL';
     CREATE USER 'developer'@'localhost' IDENTIFIED BY 'developer_pass';
     CREATE USER 'manager'@'localhost' IDENTIFIED BY 'manager_pass';
     GRANT PROXY ON 'manager'@'localhost' TO ''@'';
     GRANT PROXY ON 'developer'@'localhost' TO ''@'';

Now assume that a client tries to connect as follows:

     mysql --user=myuser --password='myuser_pass' ...

The server will not find `myuser' defined as a MySQL user. But because
there is a blank user account (`''@'''), that matches the client user
name and host name, the server authenticates the client against that
account: The server invokes `ldap_auth', passing it `myuser' and
`myuser_pass' as the user name and password.

If the `ldap_auth' plugin finds in the LDAP directory that
`myuser_pass' is not the correct password for `myuser', authentication
fails and the server rejects the connection.

If the password is correct and `ldap_auth' finds that `myuser' is a
developer, it returns the user name `developer' to the MySQL server,
rather than `myuser'. The server verifies that `''@''' can authenticate
as `developer' (because it has the `PROXY' privilege to do so) and
accepts the connection. The session proceeds with `myuser' having the
privileges of `developer'. (These privileges should be set up by the
DBA using `GRANT' statements, not shown.)  The `USER()' and
`CURRENT_USER()' functions return these values:

     mysql> SELECT USER(), CURRENT_USER();
     +------------------+---------------------+
     | USER()           | CURRENT_USER()      |
     +------------------+---------------------+
     | myuser@localhost | developer@localhost |
     +------------------+---------------------+

If the plugin instead finds in the LDAP directory that `myuser' is a
manager, it returns `manager' as the user name and the session proceeds
with `myuser' having the privileges of `manager'.

     mysql> SELECT USER(), CURRENT_USER();
     +------------------+-------------------+
     | USER()           | CURRENT_USER()    |
     +------------------+-------------------+
     | myuser@localhost | manager@localhost |
     +------------------+-------------------+

For simplicity, external authentication cannot be multilevel: Neither
the credentials for `developer' nor those for `manager' are taken into
account in the preceding example. However, they are still used if a
client tries to authenticate directly against the `developer' or
`manager' account, which is why those accounts should be assigned
passwords.

The default proxy account uses `''' in the host part, which matches any
host. If you set up a default proxy user, take care to also check for
accounts with `'%'' in the host part, because that also matches any
host, but has precedence over `''' by the rules that the server uses to
sort account rows internally (see *Note connection-access::).

Suppose that a MySQL installation includes these two accounts:

     CREATE USER ''@'' IDENTIFIED WITH some_plugin;
     CREATE USER ''@'%' IDENTIFIED BY 'some_password';

The intent of the first account is to serve as the default proxy user,
to be used to authenticate connections for users who do not otherwise
match a more-specific account. The second account might have been
created, for example, to enable users without their own account as the
anonymous user.

However, in this configuration, the first account will never be used
because the matching rules sort `''@'%'' ahead of `''@'''. For accounts
that do not match any more-specific account, the server will attempt to
authenticate them against `''@'%'' rather than `''@'''.

If you intend to create a default proxy user, check for other existing
`match any user' accounts that will take precedence over the default
proxy user and thus prevent that user from working as intended. It may
be necessary to remove any such accounts.

* Proxy User System Variables *

Two system variables help trace the proxy login process:

   * `proxy_user': This value is `NULL' if proxying is not used.
     Otherwise, it indicates the proxy user account. For example, if a
     client authenticates through the default proxy account, this
     variable will be set as follows:

          mysql> SELECT @@proxy_user;
          +--------------+
          | @@proxy_user |
          +--------------+
          | ''@''        |
          +--------------+

   * `external_user': Sometimes the authentication plugin may use an
     external user to authenticate to the MySQL server. For example,
     when using Windows native authentication, a plugin that
     authenticates using the windows API does not need the login ID
     passed to it. However, it still uses an Windows user ID to
     authenticate. The plugin may return this external user ID (or the
     first 512 UTF-8 bytes of it) to the server using the
     `external_user' read-only session variable. If the plugin does not
     set this variable, its value is `NULL'.


File: manual.info,  Node: ssl-connections,  Next: windows-and-ssh,  Prev: proxy-users,  Up: user-account-management

6.3.8 Using SSL for Secure Connections
--------------------------------------

* Menu:

* ssl-basics::                   Basic SSL Concepts
* configuring-for-ssl::          Configuring MySQL for SSL
* using-ssl-connections::        Using SSL Connections
* ssl-options::                  SSL Command Options
* creating-ssl-certs::           Setting Up SSL Certificates and Keys for MySQL

MySQL supports secure (encrypted) connections between MySQL clients and
the server using the Secure Sockets Layer (SSL) protocol. This section
discusses how to use SSL connections. For information on how to require
users to use SSL connections, see the discussion of the `REQUIRE'
clause of the *Note `GRANT': grant. statement in *Note grant::.

The standard configuration of MySQL is intended to be as fast as
possible, so encrypted connections are not used by default. For
applications that require the security provided by encrypted
connections, the extra computation to encrypt the data is worthwhile.

MySQL enables encryption on a per-connection basis. You can choose an
unencrypted connection or a secure encrypted SSL connection according
the requirements of individual applications.

Secure connections are based on the OpenSSL API and are available
through the MySQL C API. Replication uses the C API, so secure
connections can be used between master and slave servers. See *Note
replication-solutions-ssl::.

Another way to connect securely is from within an SSH connection to the
MySQL server host. For an example, see *Note windows-and-ssh::.


File: manual.info,  Node: ssl-basics,  Next: configuring-for-ssl,  Prev: ssl-connections,  Up: ssl-connections

6.3.8.1 Basic SSL Concepts
..........................

To understand how MySQL uses SSL, it is necessary to explain some basic
SSL and X509 concepts. People who are familiar with these concepts can
skip this part of the discussion.

By default, MySQL uses unencrypted connections between the client and
the server. This means that someone with access to the network could
watch all your traffic and look at the data being sent or received.
They could even change the data while it is in transit between client
and server. To improve security a little, you can compress
client/server traffic by using the `--compress' option when invoking
client programs. However, this does not foil a determined attacker.

When you need to move information over a network in a secure fashion,
an unencrypted connection is unacceptable. Encryption is the way to
make any kind of data unreadable. Encryption algorithms must include
security elements to resist many kinds of known attacks such as
changing the order of encrypted messages or replaying data twice.

SSL is a protocol that uses different encryption algorithms to ensure
that data received over a public network can be trusted.  It has
mechanisms to detect any data change, loss, or replay.  SSL also
incorporates algorithms that provide identity verification using the
X509 standard.

X509 makes it possible to identify someone on the Internet. It is most
commonly used in e-commerce applications. In basic terms, there should
be some entity called a `Certificate Authority' (or CA) that assigns
electronic certificates to anyone who needs them. Certificates rely on
asymmetric encryption algorithms that have two encryption keys (a public
key and a secret key). A certificate owner can show the certificate to
another party as proof of identity. A certificate consists of its
owner's public key. Any data encrypted with this public key can be
decrypted only using the corresponding secret key, which is held by the
owner of the certificate.

For more information about SSL, X509, encryption, or public-key
cryptography, perform an Internet search for the keywords in which you
are interested.


File: manual.info,  Node: configuring-for-ssl,  Next: using-ssl-connections,  Prev: ssl-basics,  Up: ssl-connections

6.3.8.2 Configuring MySQL for SSL
.................................

To use SSL connections between the MySQL server and client programs,
your system must support either OpenSSL or yaSSL, and your version of
MySQL must be built with SSL support. To make it easier to use secure
connections, MySQL is bundled with yaSSL, which uses the same licensing
model as MySQL. (OpenSSL uses an Apache-style license.) yaSSL support
is available on all MySQL platforms supported by Oracle Corporation.

To get secure connections to work with MySQL and SSL, you must do the
following:

  1. If you are not using a binary (precompiled) version of MySQL that
     has been built with SSL support, and you are going to use OpenSSL
     rather than the bundled yaSSL library, install OpenSSL if it has
     not already been installed. We have tested MySQL with OpenSSL
     0.9.6. To obtain OpenSSL, visit `http://www.openssl.org'.

     Building MySQL using OpenSSL requires a shared OpenSSL library,
     otherwise linker errors occur. Alternatively, build MySQL using
     yaSSL.

  2. If you are not using a binary (precompiled) version of MySQL that
     has been built with SSL support, configure a MySQL source
     distribution to use SSL. When you configure MySQL, invoke `CMake'
     like this:

          shell> cmake . -DWITH_SSL=bundled

     That command configures the distribution to use the bundled yaSSL
     library. To use the system SSL library instead, specify the option
     like this instead:

          shell> cmake . -DWITH_SSL=system

     See *Note source-configuration-options::.

     Then compile and install the distribution.

     On Unix platforms, yaSSL retrieves true random numbers from either
     `/dev/urandom' or `/dev/random'. Bug#13164 lists workarounds for
     some very old platforms which do not support these devices.

  3. To check whether a *Note `mysqld': mysqld. server supports SSL,
     examine the value of the `have_ssl' system variable:

          mysql> SHOW VARIABLES LIKE 'have_ssl';
          +---------------+-------+
          | Variable_name | Value |
          +---------------+-------+
          | have_ssl      | YES   |
          +---------------+-------+

     If the value is `YES', the server supports SSL connections. If the
     value is `DISABLED', the server is capable of supporting SSL
     connections but was not started with the appropriate `--ssl-XXX'
     options to enable them to be used; see *Note
     using-ssl-connections::.


File: manual.info,  Node: using-ssl-connections,  Next: ssl-options,  Prev: configuring-for-ssl,  Up: ssl-connections

6.3.8.3 Using SSL Connections
.............................

To enable SSL connections, your MySQL distribution must be built with
SSL support, as described in *Note configuring-for-ssl::. In addition,
the proper SSL-related options must be used to specify the appropriate
certificate and key files. For a complete list of SSL options, see
*Note ssl-options::.

To start the MySQL server so that it permits clients to connect using
SSL, use the options that identify the certificate and key files the
server uses when establishing a secure connection:

   * `--ssl-ca' identifies the Certificate Authority (CA) certificate.

   * `--ssl-cert' identifies the server public key certificate. This
     can be sent to the client and authenticated against the CA
     certificate that it has.

   * `--ssl-key' identifies the server private key.

For example, start the server like this:

     shell> mysqld --ssl-ca=CA-CERT.PEM \
              --ssl-cert=SERVER-CERT.PEM \
              --ssl-key=SERVER-KEY.PEM

Each option names a file in PEM format. For instructions on generating
the required SSL certificate and key files, see *Note
creating-ssl-certs::. If you have a MySQL source distribution, you can
also test your setup using the demonstration certificate and key files
in the `mysql-test/std_data' directory of the distribution.

Similar options are used on the client side, although in this case,
`--ssl-cert' and `--ssl-key' identify the client public and private
key. Note that the Certificate Authority certificate, if specified,
must be the same as used by the server.

To establish a secure connection to a MySQL server with SSL support,
the options that a client must specify depend on the SSL requirements
of the MySQL account used by the client. (See the discussion of the
`REQUIRE' clause in *Note grant::.)

Suppose that you want to connect using an account that has no special
SSL requirements or was created using a *Note `GRANT': grant. statement
that includes the `REQUIRE SSL' option. As a recommended set of SSL
options, start the server with at least `--ssl-cert' and `--ssl-key',
and invoke the client with `--ssl-ca'. A client can connect securely
like this:

     shell> mysql --ssl-ca=CA-CERT.PEM

To require that a client certificate also be specified, create the
account using the `REQUIRE X509' option.  Then the client must also
specify the proper client key and certificate files or the server will
reject the connection:

     shell> mysql --ssl-ca=CA-CERT.PEM \
            --ssl-cert=CLIENT-CERT.PEM \
            --ssl-key=CLIENT-KEY.PEM

A client can determine whether the current connection with the server
uses SSL by checking the value of the `Ssl_cipher' status variable.
The value of `Ssl_cipher' is nonempty if SSL is used, and empty
otherwise. For example:

     mysql> SHOW STATUS LIKE 'Ssl_cipher';
     +---------------+--------------------+
     | Variable_name | Value              |
     +---------------+--------------------+
     | Ssl_cipher    | DHE-RSA-AES256-SHA |
     +---------------+--------------------+

For the *Note `mysql': mysql. client, an alternative is to use the
`STATUS' or `\s' command and check the `SSL' line:

     mysql> \s
     ...
     SSL:                    Not in use
     ...

Or:

     mysql> \s
     ...
     SSL:                    Cipher in use is DHE-RSA-AES256-SHA
     ...

The C API enables application programs to use SSL:

   * To establish a secure connection, use the *Note `mysql_ssl_set()':
     mysql-ssl-set. C API function to set the appropriate certificate
     options before calling *Note `mysql_real_connect()':
     mysql-real-connect. See *Note mysql-ssl-set::.

   * To determine whether SSL is in use after the connection is
     established, use *Note `mysql_get_ssl_cipher()':
     mysql-get-ssl-cipher. A non-`NULL' return value indicates a secure
     connection and names the SSL cipher used for encryption. A `NULL'
     return value indicates that SSL is not being used. See *Note
     mysql-get-ssl-cipher::.

Replication uses the C API, so secure connections can be used between
master and slave servers. See *Note replication-solutions-ssl::.


File: manual.info,  Node: ssl-options,  Next: creating-ssl-certs,  Prev: using-ssl-connections,  Up: ssl-connections

6.3.8.4 SSL Command Options
...........................

This section describes options that are used to specify whether to use
SSL and the names of SSL certificate and key files. These options can
be given on the command line or in an option file.  They are not
available unless MySQL has been built with SSL support. See *Note
configuring-for-ssl::.

*SSL Option/Variable Summary*

Name           Cmd-Line    Option file System Var  Status Var  Var Scope   Dynamic
have_openssl                           Yes                     Global      No
have_ssl                               Yes                     Global      No
skip-ssl       Yes         Yes                                             
ssl            Yes         Yes                                             
ssl-ca         Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
ssl_ca                                                                     
ssl-capath     Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
ssl_capath                                                                 
ssl-cert       Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
ssl_cert                                                                   
ssl-cipher     Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
ssl_cipher                                                                 
ssl-key        Yes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
ssl_key                                                                    
ssl-verify-server-certYes         Yes                                             

   *  `--ssl'

     For the server, this option specifies that the server permits SSL
     connections. For a client program, it permits the client to
     connect to the server using SSL, but this option is not sufficient
     in itself to cause an SSL connection to be used. As a recommended
     set of options to enable SSL connections, use at least
     `--ssl-cert' and `--ssl-key' on the server side and `--ssl-ca' on
     the client side.

     `--ssl' is implied by other `--ssl-XXX' options as indicated in
     the descriptions for those options.  For this reason, `--ssl' is
     not usually specified explicitly. It is more often used explicitly
     in its opposite form to override other SSL options and indicate
     that SSL should _not_ be used. To do this, specify the option as
     `--skip-ssl' or `--ssl=0'. For example, you might have SSL options
     specified in the `[client]' group of your option file to use SSL
     connections by default when you invoke MySQL client programs. To
     use an unencrypted connection instead, invoke the client program
     with `--skip-ssl' on the command line to override the options in
     the option file.

     Use of `--ssl' does not _require_ an SSL connection to be used, it
     only permits it. For example, if you specify this option for a
     client program but the server has not been configured to permit
     SSL connections, an unencrypted connection is used.

     The secure way to require use of an SSL connection is to create a
     MySQL account that includes at least a `REQUIRE SSL' clause in the
     *Note `GRANT': grant. statement. In this case, connections for
     that account will be rejected unless MySQL supports SSL
     connections and the server and client have been started with the
     proper SSL options.

     The `REQUIRE' clause permits other SSL-related restrictions as
     well. These can be used for stricter requirements than `REQUIRE
     SSL'.  The description of `REQUIRE' in *Note grant::, provides
     additional detail about which SSL command options may or must be
     specified by clients that connect using accounts that are created
     using the various `REQUIRE' options.

   *  `--ssl-ca=FILE_NAME'

     The path to a file in PEM format that contains a list of trusted
     SSL certificate authorities. This option implies `--ssl'.

     If you use SSL when establishing a client connection, you can tell
     the client not to authenticate the server certificate by
     specifying neither `--ssl-ca' nor `--ssl-capath'. The server still
     verifies the client according to any applicable requirements
     established using *Note `GRANT': grant. statements for the client,
     and it still uses any `--ssl-ca'/`--ssl-capath' values that were
     passed to server at startup.

   *  `--ssl-capath=DIRECTORY_NAME'

     The path to a directory that contains trusted SSL certificate
     authority certificates in PEM format. This option implies `--ssl'.

     If you use SSL when establishing a client connection, you can tell
     the client not to authenticate the server certificate by
     specifying neither `--ssl-ca' nor `--ssl-capath'. The server still
     verifies the client according to any applicable requirements
     established using *Note `GRANT': grant. statements for the client,
     and it still uses any `--ssl-ca'/`--ssl-capath' values that were
     passed to server at startup.

     MySQL distributions built with OpenSSL support the `--ssl-capath'
     option.  Distributions built with yaSSL do not because yaSSL does
     not look in any directory and does not follow a chained
     certificate tree. yaSSL requires that all components of the CA
     certificate tree be contained within a single CA certificate tree
     and that each certificate in the file has a unique SubjectName
     value. To work around this yaSSL limitation, concatenate the
     individual certificate files comprising the certificate tree into
     a new file. Then specify the new file as the value of the
     `--ssl-capath' option.

   *  `--ssl-cert=FILE_NAME'

     The name of the SSL certificate file in PEM format to use for
     establishing a secure connection. This option implies `--ssl'.

   *  `--ssl-cipher=CIPHER_LIST'

     A list of permissible ciphers to use for SSL encryption. If no
     cipher in the list is supported, SSL connections will not work.
     This option implies `--ssl'.

     For greatest portability, CIPHER_LIST should be a list of one or
     more cipher names, separated by colons. This format is understood
     both by OpenSSL and yaSSL. Examples:

          --ssl-cipher=AES128-SHA
          --ssl-cipher=DHE-RSA-AES256-SHA:AES128-SHA

     OpenSSL supports a more flexible syntax for specifying ciphers, as
     described in the OpenSSL documentation at
     `http://www.openssl.org/docs/apps/ciphers.html'.  However, yaSSL
     does not, so attempts to use that extended syntax fails for a
     MySQL distribution built with yaSSL.

   *  `--ssl-key=FILE_NAME'

     The name of the SSL key file in PEM format to use for establishing
     a secure connection.

     If the MySQL distribution was built using OpenSSL and the key file
     is protected by a passphrase, the program will prompt the user for
     the passphrase. The password must be given interactively; it
     cannot be stored in a file. If the passphrase is incorrect, the
     program continues as if it could not read the key. If the MySQL
     distribution was built using yaSSL and the key file is protected
     by a passphrase, an error occurs.

   *  `--ssl-verify-server-cert'

     This option is available for client programs only, not the server.
     It causes the client to check the server's Common Name value in
     the certificate that the server sends to the client. The client
     verifies that name against the host name the client uses for
     connecting to the server, and the connection fails if there is a
     mismatch. This feature can be used to prevent man-in-the-middle
     attacks. Verification is disabled by default.


File: manual.info,  Node: creating-ssl-certs,  Prev: ssl-options,  Up: ssl-connections

6.3.8.5 Setting Up SSL Certificates and Keys for MySQL
......................................................

This section demonstrates how to set up SSL certificate and key files
for use by MySQL servers and clients. The first example shows a
simplified procedure such as you might use from the command line. The
second shows a script that contains more detail. The first two examples
are intended for use on Unix and both use the `openssl' command that is
part of OpenSSL. The third example describes how to set up SSL files on
Windows.

*Important*:

Whatever method you use to generate the certificate and key files, the
Common Name value used for the server and client certificates/keys must
each differ from the Common Name value used for the CA certificate.
Otherwise, the certificate and key files will not work for servers
compiled using OpenSSL. A typical error in this case is:

     ERROR 2026 (HY000): SSL connection error:
     error:00000001:lib(0):func(0):reason(1)

* Example 1: Creating SSL Files from the Command Line on Unix *

The following example shows a set of commands to create MySQL server
and client certificate and key files. You will need to respond to
several prompts by the `openssl' commands. To generate test files, you
can press Enter to all prompts. To generate files for production use,
you should provide nonempty responses.

     # Create clean environment
     shell> rm -rf newcerts
     shell> mkdir newcerts && cd newcerts

     # Create CA certificate
     shell> openssl genrsa 2048 > ca-key.pem
     shell> openssl req -new -x509 -nodes -days 3600 \
              -key ca-key.pem -out ca-cert.pem

     # Create server certificate, remove passphrase, and sign it
     # server-cert.pem = public key, server-key.pem = private key
     shell> openssl req -newkey rsa:2048 -days 3600 \
              -nodes -keyout server-key.pem -out server-req.pem
     shell> openssl rsa -in server-key.pem -out server-key.pem
     shell> openssl x509 -req -in server-req.pem -days 3600 \
              -CA ca-cert.pem -CAkey ca-key.pem -set_serial 01 -out server-cert.pem

     # Create client certificate, remove passphrase, and sign it
     # client-cert.pem = public key, client-key.pem = private key
     shell> openssl req -newkey rsa:2048 -days 3600 \
              -nodes -keyout client-key.pem -out client-req.pem
     shell> openssl rsa -in client-key.pem -out client-key.pem
     shell> openssl x509 -req -in client-req.pem -days 3600 \
              -CA ca-cert.pem -CAkey ca-key.pem -set_serial 01 -out client-cert.pem

After generating the certificates, verify them:

     shell> openssl verify -CAfile ca-cert.pem server-cert.pem client-cert.pem
     server-cert.pem: OK
     client-cert.pem: OK

Now you have a set of files that can be used as follows:

   * `ca-cert.pem': Use this as the argument to `--ssl-ca' on the server
     and client sides. (The CA certificate, if used, must be the same
     on both sides.)

   * `server-cert.pem', `server-key.pem': Use these as the arguments to
     `--ssl-cert' and `--ssl-key' on the server side.

   * `client-cert.pem', `client-key.pem': Use these as the arguments to
     `--ssl-cert' and `--ssl-key' on the client side.

To use the files to test SSL connections, see *Note
using-ssl-connections::.

* Example 2: Creating SSL Files Using a Script on Unix *

Here is an example script that shows how to set up SSL certificate and
key files for MySQL. After executing the script, use the files to test
SSL connections as described in *Note using-ssl-connections::.

     DIR=`pwd`/openssl
     PRIV=$DIR/private

     mkdir $DIR $PRIV $DIR/newcerts
     cp /usr/share/ssl/openssl.cnf $DIR
     replace ./demoCA $DIR -- $DIR/openssl.cnf

     # Create necessary files: $database, $serial and $new_certs_dir
     # directory (optional)

     touch $DIR/index.txt
     echo "01" > $DIR/serial

     #
     # Generation of Certificate Authority(CA)
     #

     openssl req -new -x509 -keyout $PRIV/cakey.pem -out $DIR/ca-cert.pem \
         -days 3600 -config $DIR/openssl.cnf

     # Sample output:
     # Using configuration from /home/monty/openssl/openssl.cnf
     # Generating a 1024 bit RSA private key
     # ................++++++
     # .........++++++
     # writing new private key to '/home/monty/openssl/private/cakey.pem'
     # Enter PEM pass phrase:
     # Verifying password - Enter PEM pass phrase:
     # -----
     # You are about to be asked to enter information that will be
     # incorporated into your certificate request.
     # What you are about to enter is what is called a Distinguished Name
     # or a DN.
     # There are quite a few fields but you can leave some blank
     # For some fields there will be a default value,
     # If you enter '.', the field will be left blank.
     # -----
     # Country Name (2 letter code) [AU]:FI
     # State or Province Name (full name) [Some-State]:.
     # Locality Name (eg, city) []:
     # Organization Name (eg, company) [Internet Widgits Pty Ltd]:MySQL AB
     # Organizational Unit Name (eg, section) []:
     # Common Name (eg, YOUR name) []:MySQL admin
     # Email Address []:

     #
     # Create server request and key
     #
     openssl req -new -keyout $DIR/server-key.pem -out \
         $DIR/server-req.pem -days 3600 -config $DIR/openssl.cnf

     # Sample output:
     # Using configuration from /home/monty/openssl/openssl.cnf
     # Generating a 1024 bit RSA private key
     # ..++++++
     # ..........++++++
     # writing new private key to '/home/monty/openssl/server-key.pem'
     # Enter PEM pass phrase:
     # Verifying password - Enter PEM pass phrase:
     # -----
     # You are about to be asked to enter information that will be
     # incorporated into your certificate request.
     # What you are about to enter is what is called a Distinguished Name
     # or a DN.
     # There are quite a few fields but you can leave some blank
     # For some fields there will be a default value,
     # If you enter '.', the field will be left blank.
     # -----
     # Country Name (2 letter code) [AU]:FI
     # State or Province Name (full name) [Some-State]:.
     # Locality Name (eg, city) []:
     # Organization Name (eg, company) [Internet Widgits Pty Ltd]:MySQL AB
     # Organizational Unit Name (eg, section) []:
     # Common Name (eg, YOUR name) []:MySQL server
     # Email Address []:
     #
     # Please enter the following 'extra' attributes
     # to be sent with your certificate request
     # A challenge password []:
     # An optional company name []:

     #
     # Remove the passphrase from the key
     #
     openssl rsa -in $DIR/server-key.pem -out $DIR/server-key.pem

     #
     # Sign server cert
     #
     openssl ca -cert $DIR/ca-cert.pem -policy policy_anything \
         -out $DIR/server-cert.pem -config $DIR/openssl.cnf \
         -infiles $DIR/server-req.pem

     # Sample output:
     # Using configuration from /home/monty/openssl/openssl.cnf
     # Enter PEM pass phrase:
     # Check that the request matches the signature
     # Signature ok
     # The Subjects Distinguished Name is as follows
     # countryName           :PRINTABLE:'FI'
     # organizationName      :PRINTABLE:'MySQL AB'
     # commonName            :PRINTABLE:'MySQL admin'
     # Certificate is to be certified until Sep 13 14:22:46 2003 GMT
     # (365 days)
     # Sign the certificate? [y/n]:y
     #
     #
     # 1 out of 1 certificate requests certified, commit? [y/n]y
     # Write out database with 1 new entries
     # Data Base Updated

     #
     # Create client request and key
     #
     openssl req -new -keyout $DIR/client-key.pem -out \
         $DIR/client-req.pem -days 3600 -config $DIR/openssl.cnf

     # Sample output:
     # Using configuration from /home/monty/openssl/openssl.cnf
     # Generating a 1024 bit RSA private key
     # .....................................++++++
     # .............................................++++++
     # writing new private key to '/home/monty/openssl/client-key.pem'
     # Enter PEM pass phrase:
     # Verifying password - Enter PEM pass phrase:
     # -----
     # You are about to be asked to enter information that will be
     # incorporated into your certificate request.
     # What you are about to enter is what is called a Distinguished Name
     # or a DN.
     # There are quite a few fields but you can leave some blank
     # For some fields there will be a default value,
     # If you enter '.', the field will be left blank.
     # -----
     # Country Name (2 letter code) [AU]:FI
     # State or Province Name (full name) [Some-State]:.
     # Locality Name (eg, city) []:
     # Organization Name (eg, company) [Internet Widgits Pty Ltd]:MySQL AB
     # Organizational Unit Name (eg, section) []:
     # Common Name (eg, YOUR name) []:MySQL user
     # Email Address []:
     #
     # Please enter the following 'extra' attributes
     # to be sent with your certificate request
     # A challenge password []:
     # An optional company name []:

     #
     # Remove the passphrase from the key
     #
     openssl rsa -in $DIR/client-key.pem -out $DIR/client-key.pem

     #
     # Sign client cert
     #

     openssl ca -cert $DIR/ca-cert.pem -policy policy_anything \
         -out $DIR/client-cert.pem -config $DIR/openssl.cnf \
         -infiles $DIR/client-req.pem

     # Sample output:
     # Using configuration from /home/monty/openssl/openssl.cnf
     # Enter PEM pass phrase:
     # Check that the request matches the signature
     # Signature ok
     # The Subjects Distinguished Name is as follows
     # countryName           :PRINTABLE:'FI'
     # organizationName      :PRINTABLE:'MySQL AB'
     # commonName            :PRINTABLE:'MySQL user'
     # Certificate is to be certified until Sep 13 16:45:17 2003 GMT
     # (365 days)
     # Sign the certificate? [y/n]:y
     #
     #
     # 1 out of 1 certificate requests certified, commit? [y/n]y
     # Write out database with 1 new entries
     # Data Base Updated

     #
     # Create a my.cnf file that you can use to test the certificates
     #

     cat <<EOF > $DIR/my.cnf
     [client]
     ssl-ca=$DIR/ca-cert.pem
     ssl-cert=$DIR/client-cert.pem
     ssl-key=$DIR/client-key.pem
     [mysqld]
     ssl-ca=$DIR/ca-cert.pem
     ssl-cert=$DIR/server-cert.pem
     ssl-key=$DIR/server-key.pem
     EOF

* Example 3: Creating SSL Files on Windows *

Download OpenSSL for Windows if it is not installed on your system. An
overview of available packages can be seen here:

     `http://www.slproweb.com/products/Win32OpenSSL.html'

Choose the Win32 OpenSSL Light or Win64 OpenSSL Light package,
depending on your architecture (32-bit or 64-bit). The default
installation location will be `C:\OpenSSL-Win32' or `C:\OpenSSL-Win64',
depending on which package you downloaded. The following instructions
assume a default location of `C:\OpenSSL-Win32'. Modify this as
necessary if you are using the 64-bit package.

If a message occurs during setup indicating `'...critical component is
missing: Microsoft Visual C++ 2008 Redistributables'', cancel the setup
and download one of the following packages as well, again depending on
your architecture (32-bit or 64-bit):

   * Visual C++ 2008 Redistributables (x86), available at:

          `http://www.microsoft.com/downloads/details.aspx?familyid=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF'

   * Visual C++ 2008 Redistributables (x64), available at:

          `http://www.microsoft.com/downloads/details.aspx?familyid=bd2a6171-e2d6-4230-b809-9a8d7548c1b6'

After installing the additional package, restart the OpenSSL setup
procedure.

During installation, leave the default `C:\OpenSSL-Win32' as the
install path, and also leave the default option `'Copy OpenSSL DLL files
to the Windows system directory'' selected.

When the installation has finished, add `C:\OpenSSL-Win32\bin' to the
Windows System Path variable of your server:

  1. On the Windows desktop, right-click the `My Computer' icon, and
     select `Properties'.

  2. Select the `Advanced' tab from the `System Properties' menu that
     appears, and click the `Environment Variables' button.

  3. Under `System Variables', select `Path', then click the `Edit'
     button. The `Edit System Variable' dialogue should appear.

  4. Add `';C:\OpenSSL-Win32\bin'' to the end (notice the semicolon).

  5. Press OK 3 times.

  6. Check that OpenSSL was correctly integrated into the Path variable
     by opening a new command console (`Start>Run>cmd.exe') and
     verifying that OpenSSL is available:

          Microsoft Windows [Version ...]
          Copyright (c) 2006 Microsoft Corporation. All rights reserved.

          C:\Windows\system32>cd \

          C:\>openssl
          OpenSSL> exit <<< If you see the OpenSSL prompt, installation was successful.

          C:\>

Depending on your version of Windows, the preceding path-setting
instructions might differ slightly.

After OpenSSL has been installed, use instructions similar to those
from from Example 1 (shown earlier in this section), with the following
changes:

   * Change the following Unix commands:

          # Create clean environment
          shell> rm -rf newcerts
          shell> mkdir newcerts && cd newcerts

     On Windows, use these commands instead:

          # Create clean environment
          shell> md c:\newcerts
          shell> cd c:\newcerts

   * When a `'\'' character is shown at the end of a command line, this
     `'\'' character must be removed and the command lines entered all
     on a single line.

After generating the certificate and key files, to use them to test SSL
connections, see *Note using-ssl-connections::.


File: manual.info,  Node: windows-and-ssh,  Next: audit-log-plugin,  Prev: ssl-connections,  Up: user-account-management

6.3.9 Connecting to MySQL Remotely from Windows with SSH
--------------------------------------------------------

This section describes how to get a secure connection to a remote MySQL
server with SSH. The information was provided by David Carlson
<dcarlson@mplcomm.com>.

  1. Install an SSH client on your Windows machine. As a user, the best
     nonfree one I have found is from `SecureCRT' from
     `http://www.vandyke.com/'. Another option is `f-secure' from
     `http://www.f-secure.com/'. You can also find some free ones on
     `Google' at
     `http://directory.google.com/Top/Computers/Internet/Protocols/SSH/Clients/Windows/'.

  2. Start your Windows SSH client. Set `Host_Name =
     YOURMYSQLSERVER_URL_OR_IP'.  Set `userid=YOUR_USERID' to log in to
     your server. This `userid' value might not be the same as the user
     name of your MySQL account.

  3. Set up port forwarding. Either do a remote forward (Set
     `local_port: 3306', `remote_host: YOURMYSQLSERVERNAME_OR_IP',
     `remote_port: 3306' ) or a local forward (Set `port: 3306', `host:
     localhost', `remote port: 3306').

  4. Save everything, otherwise you will have to redo it the next time.

  5. Log in to your server with the SSH session you just created.

  6. On your Windows machine, start some ODBC application (such as
     Access).

  7. Create a new file in Windows and link to MySQL using the ODBC
     driver the same way you normally do, except type in `localhost'
     for the MySQL host server, not YOURMYSQLSERVERNAME.

At this point, you should have an ODBC connection to MySQL, encrypted
using SSH.


File: manual.info,  Node: audit-log-plugin,  Next: account-activity-auditing,  Prev: windows-and-ssh,  Up: user-account-management

6.3.10 MySQL Enterprise Audit Log Plugin
----------------------------------------

* Menu:

* audit-log-plugin-installation::  Installing the Audit Log Plugin
* audit-log-security::           Audit Log Plugin Security Considerations
* audit-log-file::               The Audit Log File
* audit-log-plugin-logging-control::  Audit Log Plugin Logging Control
* audit-log-plugin-options-variables::  Audit Log Plugin Options and Variables
* audit-log-plugin-restrictions::  Audit Log Plugin Restrictions

*Note*:

MySQL Enterprise Audit is a commercial extension. To learn more about
commercial products (MySQL Enterprise Edition), see
http://www.mysql.com/products/.

As of MySQL 5.5.28, MySQL Enterprise Edition includes MySQL Enterprise
Audit, implemented using a server plugin named `audit_log'. MySQL
Enterprise Audit uses the open MySQL Audit API to enable standard,
policy-based monitoring and logging of connection and query activity
executed on specific MySQL servers. Designed to meet the Oracle audit
specification, MySQL Enterprise Audit provides an out of box, easy to
use auditing and compliance solution for applications that are governed
by both internal and external regulatory guidelines.

When installed, the audit plugin enables MySQL Server to produce a log
file containing an audit record of server activity. The log contents
include when clients connect and disconnect, and what actions they
perform while connected, such as which databases and tables they access.

After you install the plugin (see *Note
audit-log-plugin-installation::), it writes an audit log file. By
default, the file is named `audit.log' in the server data directory. To
change the name of the file, set the `audit_log_file' system variable at
server startup.

Audit log file contents are not encrypted. See *Note
audit-log-security::.

The audit log file is written in XML format, with auditable events
encoded as `<AUDIT_RECORD>' elements. For details on file format and
contents, see *Note audit-log-file::.

To control what information `audit_log' writes to its log file, set the
`audit_log_policy' system variable.  By default, this variable is set
to `ALL' (write all auditable events), but also permits values of
`LOGINS' or `QUERIES' to log only login or query events, or `NONE' to
disable logging.

For more information about controlling how logging occurs, see *Note
audit-log-plugin-logging-control::. For descriptions of the parameters
used to configure the audit log plugin, see *Note
audit-log-plugin-options-variables::.

The Performance Schema (see *Note performance-schema::) has
instrumentation for the audit log plugin. To identify the relevant
instruments, use this query:

     SELECT NAME FROM performance_schema.setup_instruments
     WHERE NAME LIKE '%/alog/%';


File: manual.info,  Node: audit-log-plugin-installation,  Next: audit-log-security,  Prev: audit-log-plugin,  Up: audit-log-plugin

6.3.10.1 Installing the Audit Log Plugin
........................................

The audit log plugin is named `audit_log'. To be usable by the server,
the plugin library object file must be located in the MySQL plugin
directory (the directory named by the `plugin_dir' system variable). If
necessary, set the value of `plugin_dir' at server startup to tell the
server the location of the plugin directory.

To load the plugin at server startup, use the `--plugin-load' option to
name the object file that contains the plugin. With this plugin-loading
method, the option must be given each time the server starts.  For
example, put the following lines in your `my.cnf' file:

     [mysqld]
     plugin-load=audit_log.so

If object files have a suffix different from `.so' on your system,
substitute the correct suffix (for example, `.dll' on Windows).

Alternatively, to register the plugin at runtime, use this statement
(changing the suffix as necessary):

     mysql> INSTALL PLUGIN audit_log SONAME 'audit_log.so';

*Note `INSTALL PLUGIN': install-plugin. loads the plugin, and also
registers it in the `mysql.plugins' table to cause the plugin to be
loaded for each subsequent normal server startup.

If the plugin is loaded with `--plugin-load' or has been previously
registered with *Note `INSTALL PLUGIN': install-plugin, you can use the
`--audit-log' option at server startup to control plugin activation. For
example, to load the plugin and prevent it from being removed at
runtime, use these options:

     [mysqld]
     plugin-load=audit_log.so
     audit-log=FORCE_PLUS_PERMANENT

If it is desired to prevent the server from running without the audit
plugin, use `--audit-log' with a value of `FORCE' or
`FORCE_PLUS_PERMANENT' to force server startup to fail if the plugin
does not initialize successfully.

For general information about installing plugins, see *Note
server-plugins::. To verify plugin installation, examine the *Note
`INFORMATION_SCHEMA.PLUGINS': plugins-table. table or use the *Note
`SHOW PLUGINS': show-plugins. statement.  See *Note
obtaining-plugin-information::.

Audit log file contents are not encrypted. See *Note
audit-log-security::.

For additional information about the parameters used to configure
operation of the `audit_log' plugin, see *Note
audit-log-plugin-options-variables::.


File: manual.info,  Node: audit-log-security,  Next: audit-log-file,  Prev: audit-log-plugin-installation,  Up: audit-log-plugin

6.3.10.2 Audit Log Plugin Security Considerations
.................................................

Contents of the audit log file produced by the `audit_log' audit log
plugin are not encrypted and may contain sensitive information, such as
the text of SQL statements. For security reasons, this file should be
written to a directory accessible only to the MySQL server and users
with a legitimate reason to view the log. The default file is
`audit.log' in the data directory. This can be changed by setting the
`audit_log_file' system variable at server startup.


File: manual.info,  Node: audit-log-file,  Next: audit-log-plugin-logging-control,  Prev: audit-log-security,  Up: audit-log-plugin

6.3.10.3 The Audit Log File
...........................

Audit log file contents are not encrypted. See *Note
audit-log-security::.

The audit log file is written as XML, using UTF-8 (up to 4 bytes per
character). The root element is `<AUDIT>'. The closing `</AUDIT>' tag
of the root element is written when the audit log plugin terminates, so
the tag is not present in the file while the plugin is active.

The root element contains `<AUDIT_RECORD>' elements. Each
`<AUDIT_RECORD>' element has an empty body; all audit record fields are
represented by element attributes.

Here is a sample log file, reformatted slightly for readability:

     <?xml version="1.0" encoding="UTF-8"?>
     <AUDIT>
       <AUDIT_RECORD
         TIMESTAMP="2012-08-02T14:52:12"
         NAME="Audit"
         SERVER_ID="1"
         VERSION="1"
         STARTUP_OPTIONS="--port=3306"
         OS_VERSION="i686-Linux"
         MYSQL_VERSION="5.5.28-debug-log"/>
       <AUDIT_RECORD
         TIMESTAMP="2012-08-02T14:52:41"
         NAME="Connect"
         CONNECTION_ID="1"
         STATUS="0"
         USER="root"
         PRIV_USER="root"
         OS_LOGIN=""
         PROXY_USER=""
         HOST="localhost"
         IP="127.0.0.1"
         DB=""/>
       <AUDIT_RECORD
         TIMESTAMP="2012-08-02T14:53:45"
         NAME="Query"
         CONNECTION_ID="1"
         STATUS="0"
         SQLTEXT="INSERT INTO t1 () VALUES()"/>
       <AUDIT_RECORD
         TIMESTAMP="2012-08-02T14:53:51"
         NAME="Quit"
         CONNECTION_ID="1"
         STATUS="0"/>
       <AUDIT_RECORD
         TIMESTAMP="2012-08-06T14:21:03"
         NAME="NoAudit"
         SERVER_ID="1"/>
     </AUDIT>

Attributes of `<AUDIT_RECORD>' elements have these characteristics:

   * Some attributes appear in every element, but most are optional and
     do not necessarily appear in every element.

   * Order of attributes within an element is not guaranteed.

   * Attribute values are not fixed length. Long values may be
     truncated as indicated in the attribute descriptions given later.

   * The `<', `>', `"', and `&' characters are encoded as `&lt;',
     `&gt;', `&quot;', and `&amp;', respectively. NUL bytes (U+00) are
     encoded as the `?' character.

   * Characters not valid as XML characters are encoded using numeric
     character references. Valid XML characters are:

          #x9 | #xA | #xD | [#x20-#xD7FF] | [#xE000-#xFFFD] | [#x10000-#x10FFFF]

Every `<AUDIT_RECORD>' element contains a set of mandatory attributes.
Other optional attributes may appear depending on the audit record type.

The following attributes are mandatory in every `<AUDIT_RECORD>'
element:

   * `NAME'

     A string representing the type of instruction that generated the
     audit event, such as a command that the server received from a
     client.

     Example: `NAME="Query"'

     Some common `NAME' values:

          "Audit"    When auditing starts, which may be server startup time
          "Connect"  When a client connects, also known as logging in
          "Query"    An SQL statement (executed directly)
          "Prepare"  Preparation of an SQL statement; usually followed by Execute
          "Execute"  Execution of an SQL statement; usually follows Prepare
          "Shutdown" Server shutdown
          "Quit"     When a client disconnects
          "NoAudit"  Auditing has been turned off

     The possible values are `"Audit"', `"Binlog Dump"', `"Change
     user"', `"Close stmt"', `"Connect Out"', `"Connect"', `"Create
     DB"', `"Daemon"', `"Debug"', `"Delayed insert"', `"Drop DB"',
     `"Execute"', `"Fetch"', `"Field List"', `"Init DB"', `"Kill"',
     `"Long Data"', `"NoAudit"', `"Ping"', `"Prepare"', `"Processlist"',
     `"Query"', `"Quit"', `"Refresh"', `"Register Slave"', `"Reset
     stmt"', `"Set option"', `"Shutdown"', `"Sleep"', `"Statistics"',
     `"Table Dump"', `"Time"'.

     With the exception of `"Audit"' and `"NoAudit"', these values
     correspond to the `COM_XXX' command values listed in the
     `mysql_com.h' header file. For example, `"Create DB"' and
     `"Shutdown"' correspond to `COM_CREATE_DB' and `COM_SHUTDOWN',
     respectively.

   * `TIMESTAMP'

     The date and time that the audit event was generated. For example,
     the event corresponding to execution of an SQL statement received
     from a client has a `TIMESTAMP' value occurring after the
     statement finishes, not when it is received. The value is UTC, in
     the format `YYYY-MM-DDTHH:MM:SS' (with `T', no decimals).

     Example: `TIMESTAMP="2012-08-09T12:55:16"'

The following attributes are optional in `<AUDIT_RECORD>' elements.
Many of them occur only for elements with specific values of the `NAME'
attribute.

   * `CONNECTION_ID'

     An unsigned integer representing the client connection identifier.
     This is the same as the `CONNECTION_ID()' function value within
     the session.

     Example: `CONNECTION_ID="127"'

   * `DB'

     A string representing the default database name. This attribute
     appears only if the `NAME' value is `"Connect"' or `"Change user"'.

   * `HOST'

     A string representing the client host name. This attribute appears
     only if the `NAME' value is `"Connect"' or `"Change user"'.

     Example: `HOST="localhost"'

   * `IP'

     A string representing the client IP address. This attribute
     appears only if the `NAME' value is `"Connect"' or `"Change user"'.

     Example: `IP="127.0.0.1"'

   * `MYSQL_VERSION'

     A string representing the MySQL server version. This is the same
     as the value of the `VERSION()' function or `version' system
     variable.  This attribute appears only if the `NAME' value is
     `"Audit"'.

     Example: `MYSQL_VERSION="5.5.31-log"'

   * `OS_LOGIN'

     A string representing the external user (empty if none). The value
     may differ from `USER', for example, if the server authenticates
     the client using an external authentication method. This attribute
     appears only if the `NAME' value is `"Connect"' or `"Change user"'.

   * `OS_VERSION'

     A string representing the operating system on which the server was
     built or is running. This attribute appears only if the `NAME'
     value is `"Audit"'.

     Example: `OS_VERSION="x86_64-Linux"'

   * `PRIV_USER'

     A string representing the user that the server authenticated the
     client as. This is the user name that the server uses for
     privilege checking, and may be different from the `USER' value.
     This attribute appears only if the `NAME' value is `"Connect"' or
     `"Change user"'.

   * `PROXY_USER'

     A string representing the proxy user. The value is empty if user
     proxying is not in effect. This attribute appears only if the
     `NAME' value is `"Connect"' or `"Change user"'.

   * `SERVER_ID'

     An unsigned integer representing the server ID. This is the same
     as the value of the `server_id' system variable.  This attribute
     appears only if the `NAME' value is `"Audit"' or `"NoAudit"'.

     Example: `SERVER_ID="1"'

   * `SQLTEXT'

     A string representing the text of an SQL statement. The value can
     be empty. Long values may be truncated. This attribute appears
     only if the `NAME' value is `"Query"' or `"Execute"'.

     The string, like the audit log file itself, is written using UTF-8
     (up to 4 bytes per character), so the value may be the result of
     conversion. For example, the original statement might have been
     received from the client as an SJIS string.

     Example: `SQLTEXT="DELETE FROM t1"'

   * `STARTUP_OPTIONS'

     A string representing the options that were given on the command
     line or in option files when the MySQL server was started. This
     attribute appears only if the `NAME' value is `"Audit"'.

     Example: `STARTUP_OPTIONS="--port=3306 --log-output=FILE"'

   * `STATUS'

     An unsigned integer representing the command status: 0 for
     success, nonzero if an error occurred. This is the same as the
     value of the *Note `mysql_errno()': mysql-errno. C API function.

     The audit log does not contain the SQLSTATE value or error
     message. To see the associations between error codes, SQLSTATE
     values, and messages, see *Note error-messages-server::.

     Warnings are not logged.

     Example: `STATUS="1051"'

   * `USER'

     A string representing the user name sent by the client. This may
     be different from the `PRIV_USER' value. This attribute appears
     only if the `NAME' value is `"Connect"' or `"Change user"'.

   * `VERSION'

     An unsigned integer representing the version of the audit log file
     format. This attribute appears only if the `NAME' value is
     `"Audit"'.

     Example: `VERSION="1"'


File: manual.info,  Node: audit-log-plugin-logging-control,  Next: audit-log-plugin-options-variables,  Prev: audit-log-file,  Up: audit-log-plugin

6.3.10.4 Audit Log Plugin Logging Control
.........................................

This section describes how the `audit_log' plugin performs logging and
the system variables that control how logging occurs. It assumes
familiarity with the log file format described in *Note
audit-log-file::.

When the audit log plugin opens its log file, it checks whether the XML
declaration and opening `<AUDIT>' root element tag need to be written
and writes them if so. When the audit log plugin terminates, it writes
a closing `</AUDIT>' tag to the file.

If the log file exists at open time, the plugin checks whether the file
ends with an `</AUDIT>' tag and truncates it if so before writing any
`<AUDIT_RECORD>' elements. If the log file exists but does not end with
`</AUDIT>' or the `</AUDIT>' tag cannot be truncated, the plugin
considers the file malformed and fails to initialize.  This can occur
if the server crashes or is killed with the audit log plugin running.
No logging occurs until the problem is rectified. Check the error log
for diagnostic information:

     [ERROR] Plugin 'audit_log' init function returned error.

To deal with this problem, you must either remove or rename the
malformed log file and restart the server.

The MySQL server calls the audit log plugin to write an
`<AUDIT_RECORD>' element whenever an auditable event occurs, such as
when it completes execution of an SQL statement received from a client.
Typically the first `<AUDIT_RECORD>' element written after server
startup has the server description and startup options.  Elements
following that one represent events such as client connect and
disconnect events, executed SQL statements, and so forth. Only
top-level statements are logged, not statements within stored programs
such as triggers or stored procedures.  Contents of files referenced by
statements such as *Note `LOAD DATA INFILE': load-data. are not logged.

To permit control over how logging occurs, the `audit_log' plugin
provides several system variables, described following. For more
information, see *Note audit-log-plugin-options-variables::.

   * `audit_log_file': The name of the log file. By default, the name is
     `audit.log' in the server data directory.  For security reasons,
     the audit log file should be written to a directory accessible
     only to the MySQL server and users with a legitimate reason to
     view the log.

   * `audit_log_policy': What kinds of information the plugin writes.
     By default, this variable is set to `ALL' (write all auditable
     events), but also permits values of `LOGINS' or `QUERIES' to log
     only login or query events, or `NONE' to disable logging.

   * `audit_log_strategy': The method used for log writes. By default,
     the strategy value is `ASYNCHRONOUS' and the plugin logs
     asynchronously to a buffer, waiting if the buffer is full.  It's
     possible to tell the plugin not to wait (`PERFORMANCE') or to log
     synchronously, either using file system caching
     (`SEMISYNCHRONOUS') or forcing output with a `sync()' call after
     each write request (`SYNCHRONOUS').

     Asynchronous logging strategy has these characteristics:

        * Minimal impact on server performance and scalability.

        * Blocking of threads that generate audit events for the
          shortest possible time; that is, time to allocate the buffer
          plus time to copy the event to the buffer.

        * Output goes to the buffer. Writes from the buffer to the log
          file are handled by a separate thread.

     A disadvantage of `PERFORMANCE' strategy is that it drops events
     when the buffer is full. For a heavily loaded server, it is more
     likely that the audit log will be missing events.

     With asynchronous logging, the integrity of the log file may be
     compromised if a problem occurs during a write to the file or if
     the plugin does not shut down cleanly (for example, in the event
     that the server host crashes). To reduce this risk, set
     `audit_log_strategy' use synchronous logging. Regardless of
     strategy, logging occurs on a best-effort basis, with no guarantee
     of consistency.

   * `audit_log_buffer_size': The size of the buffer for asynchronous
     logging. The plugin uses a single buffer, which it allocates when
     it initializes and removes when it terminates. The plugin
     allocates this buffer only if logging is asynchronous.

   * `audit_log_rotate_on_size', `audit_log_flush': These variables
     permit audit log file rotation and flushing. The audit log file
     has the potential to grow very large and consume a lot of disk
     space. To manage the space used, either enable automatic log
     rotation, or manually rename the audit file and flush the log to
     open a new file. The renamed file can be removed or backed up as
     desired.

     By default, `audit_log_rotate_on_size=0' and there is no log
     rotation. In this case, the audit log plugin closes and reopens
     the log file when the `audit_log_flush' value changes from
     disabled to enabled. Log file renaming must be done externally to
     the server. Suppose that you want to maintain the three most
     recent log files, which cycle through the names `audit.log.1'
     through `audit.log.3'. On Unix, perform rotation manually like
     this:

       1. From the command line, rename the current log files:

               shell> mv audit.log.2 audit.log.3
               shell> mv audit.log.1 audit.log.2
               shell> mv audit.log audit.log.1

          At this point, the plugin is still writing to the current log
          file, which has been renamed to `audit.log.1'.

       2. Connect to the server and flush the log file so the plugin
          closes it and reopens a new `audit.log' file:

               mysql> SET GLOBAL audit_log_flush = ON;

     If `audit_log_rotate_on_size' is greater than 0, setting
     `audit_log_flush' has no effect. In this case, the audit log
     plugin closes and reopens its log file whenever a write to the
     file causes its size to exceed the `audit_log_rotate_on_size'
     value. The plugin renames the original file to have a timestamp
     extension. For example, `audit.log' might be renamed to
     `audit.log.13440033615657730'. The last 7 digits are a fractional
     second part. The first 10 digits are a Unix timestamp value that
     can be interpreted using the `FROM_UNIXTIME()' function:

          mysql> SELECT FROM_UNIXTIME(1344003361);
          +---------------------------+
          | FROM_UNIXTIME(1344003361) |
          +---------------------------+
          | 2012-08-03 09:16:01       |
          +---------------------------+


File: manual.info,  Node: audit-log-plugin-options-variables,  Next: audit-log-plugin-restrictions,  Prev: audit-log-plugin-logging-control,  Up: audit-log-plugin

6.3.10.5 Audit Log Plugin Options and Variables
...............................................

This section describes the command options and system variables that
control operation of the audit log plugin. If values specified at
startup time are incorrect, the plugin may fail to initialize properly
and the server does not load it. In this case, the server may also
produce error messages for other audit log settings because it will not
recognize them.

To control the activation of the `audit_log' plugin, use this option:

   *  `--audit-log[=VALUE]'

     Options for audit-log

     *Introduced*         5.5.28          
     *Command-Line        `--audit-log[=value]'        
     Format*                              
     *Option-File Format* `audit-log'        
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `ON'            
     *Valid Values*       `ON'            
     `OFF'                                
     `FORCE'                              
     `FORCE_PLUS_PERMANENT'                

     This option controls how the server loads the `audit_log' plugin
     at startup. It is available only if the audit log plugin has been
     previously registered with *Note `INSTALL PLUGIN': install-plugin.
     or is loaded with `--plugin-load'. See *Note
     audit-log-plugin-installation::.

     The option value should be one of those available for
     plugin-loading options, as described in *Note
     server-plugin-loading::. For example,
     `--audit-log=FORCE_PLUS_PERMANENT' tells the server to load the
     plugin and prevent it from being removed while the server is
     running.

     This option was added in MySQL 5.5.28.

If the `audit_log' plugin is installed, it exposes several system
variables that permit control over logging:

     mysql> SHOW VARIABLES LIKE 'audit_log%';
     +--------------------------+--------------+
     | Variable_name            | Value        |
     +--------------------------+--------------+
     | audit_log_buffer_size    | 1048576      |
     | audit_log_file           | audit.log    |
     | audit_log_flush          | OFF          |
     | audit_log_policy         | ALL          |
     | audit_log_rotate_on_size | 0            |
     | audit_log_strategy       | ASYNCHRONOUS |
     +--------------------------+--------------+

You can set any of these variables at server startup, and some of them
at runtime.

   *  `audit_log_buffer_size'

     Options for audit_log_buffer_size

     *Introduced*         5.5.28          
     *System Variable     `audit_log_buffer_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `1048576'        
     *Range*              `4096           
                          ..              
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `1048576'        
     *Range*              `4096           
                          ..              
                          18446744073709547520'        

     When the audit log plugin writes events to the log asynchronously,
     it uses a buffer to store event contents prior to writing them.
     This variable controls the size of that buffer, in bytes. The
     server adjusts the value to a multiple of 4096. The plugin uses a
     single buffer, which it allocates when it initializes and removes
     when it terminates. The plugin allocates this buffer only if
     logging is asynchronous.

     This variable was added in MySQL 5.5.28. It is available only if
     the `audit_log' plugin is enabled.

   *  `audit_log_file'

     Options for audit_log_file

     *Introduced*         5.5.28          
     *System Variable     `audit_log_file'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `audit.log'        

     The name of the file to which the audit log plugin writes events.
     The default value is `audit.log'.  If the file name is a relative
     path, the server interprets it relative to the data directory. For
     security reasons, the audit log file should be written to a
     directory accessible only to the MySQL server and users with a
     legitimate reason to view the log.

     This variable was added in MySQL 5.5.28. It is available only if
     the `audit_log' plugin is enabled.

   *  `audit_log_flush'

     Options for audit_log_flush

     *Introduced*         5.5.28          
     *System Variable     `audit_log_flush'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     When this variable is set to enabled (1 or `ON'), the audit log
     plugin closes and reopens its log file to flush it. (The value
     remains `OFF' so that you need not disable it explicitly before
     enabling it again to perform another flush.) Enabling this
     variable has no effect unless `audit_log_rotate_on_size' is 0.

     This variable was added in MySQL 5.5.28. It is available only if
     the `audit_log' plugin is enabled.

   *  `audit_log_policy'

     Options for audit_log_policy

     *Introduced*         5.5.28          
     *System Variable     `audit_log_policy'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `ALL'           
     *Valid Values*       `ALL'           
     `NONE'                               
     `LOGINS'                             
     `QUERIES'                            

     The policy controlling the information written by the audit log
     plugin to its log file. The following table shows the permitted
     values.

     This table shows permitted values for the `audit_log_policy'
     variable.

     Value      Description
     `ALL'      Log all events
     `NONE'     Log nothing (disable the audit stream)
     `LOGINS'   Log only login events
     `QUERIES'  Log only query events

     This variable was added in MySQL 5.5.28. It is available only if
     the `audit_log' plugin is enabled.

   *  `audit_log_rotate_on_size'

     Options for audit_log_rotate_on_size

     *Introduced*         5.5.28          
     *System Variable     `audit_log_rotate_on_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             

     If the `audit_log_rotate_on_size' value is greater than 0, the
     audit log plugin closes and reopens its log file if a write to the
     file causes its size to exceed this value. The original file is
     renamed to have a timestamp extension.

     If the `audit_log_rotate_on_size' value is 0, the plugin does not
     close and reopen its log based on size. Instead, use
     `audit_log_flush' to close and reopen the log on demand. In this
     case, rename the file externally to the server before flushing it.

     For more information about audit log file rotation and timestamp
     interpretation, see *Note audit-log-plugin-logging-control::.

     If you set this variable to a value that is not a multiple of
     4096, it is truncated to the nearest multiple.

     This variable was added in MySQL 5.5.28. It is available only if
     the `audit_log' plugin is enabled.

   *  `audit_log_strategy'

     Options for audit_log_strategy

     *Introduced*         5.5.28          
     *System Variable     `audit_log_strategy'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `ASYNCHRONOUS'        
     *Valid Values*       `ASYNCHRONOUS'        
     `PERFORMANCE'                        
     `SEMISYNCHRONOUS'                    
     `SYNCHRONOUS'                        

     The logging method used by the audit log plugin. The following
     table describes the permitted values.

     *Audit Log Strategies*

     Value                Meaning
     `ASYNCHRONOUS'       Log asynchronously, wait for space in output
                          buffer
     `PERFORMANCE'        Log asynchronously, drop request if
                          insufficient space in output buffer
     `SEMISYNCHRONOUS'    Log synchronously, permit caching by operating
                          system
     `SYNCHRONOUS'        Log synchronously, call `sync()' after each
                          request

     This variable was added in MySQL 5.5.28. It is available only if
     the `audit_log' plugin is enabled.


File: manual.info,  Node: audit-log-plugin-restrictions,  Prev: audit-log-plugin-options-variables,  Up: audit-log-plugin

6.3.10.6 Audit Log Plugin Restrictions
......................................

The audit log plugin is subject to these restrictions:

   * Only top-level statements are logged, not statements within stored
     programs such as triggers or stored procedures.

   * Contents of files referenced by statements such as *Note `LOAD
     DATA INFILE': load-data. are not logged.


File: manual.info,  Node: account-activity-auditing,  Prev: audit-log-plugin,  Up: user-account-management

6.3.11 SQL-Based MySQL Account Activity Auditing
------------------------------------------------

Applications can use the following guidelines to perform SQL-based
auditing that ties database activity to MySQL accounts.

MySQL accounts correspond to rows in the `mysql.user' table. When a
client connects successfully, the server authenticates the client to a
particular row in this table. The `User' and `Host' column values in
this row uniquely identify the account and correspond to the
`'USER_NAME'@'HOST_NAME'' format in which account names are written in
SQL statements.

The account used to authenticate a client determines which privileges
the client has. Normally, the `CURRENT_USER()' function can be invoked
to determine which account this is for the client user.  Its value is
constructed from the `User' and `Host' columns of the `user' table row
for the account.

However, there are circumstances under which the `CURRENT_USER()' value
corresponds not to the client user but to a different account. This
occurs in contexts when privilege checking is not based the client's
account:

   * Stored routines (procedures and functions) defined with the `SQL
     SECURITY DEFINER' characteristic

   * Views defined with the `SQL SECURITY DEFINER' characteristic

   * Triggers and events

In those contexts, privilege checking is done against the `DEFINER'
account and `CURRENT_USER()' refers to that account, not to the account
for the client who invoked the stored routine or view or who caused the
trigger to activate. To determine the invoking user, you can call the
`USER()' function, which returns a value indicating the actual user
name provided by the client and the host from which the client
connected. However, this value does not necessarily correspond directly
to an account in the `user' table, because the `USER()' value never
contains wildcards, whereas account values (as returned by
`CURRENT_USER()') may contain user name and host name wildcards.

For example, a blank user name matches any user, so an account of
`''@'localhost'' enables clients to connect as an anonymous user from
the local host with any user name. If this case, if a client connects
as `user1' from the local host, `USER()' and `CURRENT_USER()' return
different values:

     mysql> SELECT USER(), CURRENT_USER();
     +-----------------+----------------+
     | USER()          | CURRENT_USER() |
     +-----------------+----------------+
     | user1@localhost | @localhost     |
     +-----------------+----------------+

The host name part of an account can contain wildcards, too. If the
host name contains a `'%'' or `'_'' pattern character or uses netmask
notation, the account can be used for clients connecting from multiple
hosts and the `CURRENT_USER()' value will not indicate which one. For
example, the account `'user2'@'%.example.com'' can be used by `user2'
to connect from any host in the `example.com' domain. If `user2'
connects from `remote.example.com', `USER()' and `CURRENT_USER()'
return different values:

     mysql> SELECT USER(), CURRENT_USER();
     +--------------------------+---------------------+
     | USER()                   | CURRENT_USER()      |
     +--------------------------+---------------------+
     | user2@remote.example.com | user2@%.example.com |
     +--------------------------+---------------------+

If an application must invoke `USER()' for user auditing (for example,
if it does auditing from within triggers) but must also be able to
associate the `USER()' value with an account in the `user' table, it is
necessary to avoid accounts that contain wildcards in the `User' or
`Host' column.  Specifically, do not permit `User' to be empty (which
creates an anonymous-user account), and do not permit pattern
characters or netmask notation in `Host' values. All accounts must have
a nonempty `User' value and literal `Host' value.

With respect to the previous examples, the `''@'localhost'' and
`'user2'@'%.example.com'' accounts should be changed not to use
wildcards:

     RENAME USER ''@'localhost' TO 'user1'@'localhost';
     RENAME USER 'user2'@'%.example.com' TO 'user2'@'remote.example.com';

If `user2' must be able to connect from several hosts in the
`example.com' domain, there should be a separate account for each host.

To extract the user name or host name part from a `CURRENT_USER()' or
`USER()' value, use the `SUBSTRING()' function:

     mysql> SELECT SUBSTRING_INDEX(CURRENT_USER(),'@',1);
     +---------------------------------------+
     | SUBSTRING_INDEX(CURRENT_USER(),'@',1) |
     +---------------------------------------+
     | user1                                 |
     +---------------------------------------+

     mysql> SELECT SUBSTRING_INDEX(CURRENT_USER(),'@',-1);
     +----------------------------------------+
     | SUBSTRING_INDEX(CURRENT_USER(),'@',-1) |
     +----------------------------------------+
     | localhost                              |
     +----------------------------------------+


File: manual.info,  Node: backup-and-recovery,  Next: optimization,  Prev: security,  Up: Top

7 Backup and Recovery
*********************

* Menu:

* backup-types::                 Backup and Recovery Types
* backup-methods::               Database Backup Methods
* backup-strategy-example::      Example Backup and Recovery Strategy
* using-mysqldump::              Using `mysqldump' for Backups
* point-in-time-recovery::       Point-in-Time (Incremental) Recovery Using the Binary Log
* myisam-table-maintenance::     `MyISAM' Table Maintenance and Crash Recovery

It is important to back up your databases so that you can recover your
data and be up and running again in case problems occur, such as system
crashes, hardware failures, or users deleting data by mistake. Backups
are also essential as a safeguard before upgrading a MySQL
installation, and they can be used to transfer a MySQL installation to
another system or to set up replication slave servers.

MySQL offers a variety of backup strategies from which you can choose
the methods that best suit the requirements for your installation. This
chapter discusses several backup and recovery topics with which you
should be familiar:

   * Types of backups: Logical versus physical, full versus
     incremental, and so forth.

   * Methods for creating backups.

   * Recovery methods, including point-in-time recovery.

   * Backup scheduling, compression, and encryption.

   * Table maintenance, to enable recovery of corrupt tables.

* Additional Resources *

Resources related to backup or to maintaining data availability include
the following:

   * Customers of MySQL Enterprise Edition can use the MySQL Enterprise
     Backup product for backups. For an overview of the MySQL
     Enterprise Backup product, see *Note mysql-enterprise-backup::.

   * A forum dedicated to backup issues is available at
     `http://forums.mysql.com/list.php?93'.

   * Details for *Note `mysqldump': mysqldump, *Note `mysqlhotcopy':
     mysqlhotcopy, and other MySQL backup programs can be found in
     *Note programs::.

   * The syntax of the SQL statements described here is given in *Note
     sql-syntax::.

   * For additional information about `InnoDB' backup procedures, see
     *Note innodb-backup::.

   * Replication enables you to maintain identical data on multiple
     servers. This has several benefits, such as enabling client query
     load to be distributed over servers, availability of data even if
     a given server is taken offline or fails, and the ability to make
     backups with no impact on the master by using a slave server. See
     *Note replication::.

   * MySQL Cluster provides a high-availability, high-redundancy
     version of MySQL adapted for the distributed computing
     environment. See *Note mysql-cluster::. For information
     specifically about MySQL Cluster backup, see *Note
     mysql-cluster-backup::.

   * Distributed Replicated Block Device (DRBD) is another
     high-availability solution. It works by replicating a block device
     from a primary server to a secondary server at the block level.
     See *Note ha-overview::


File: manual.info,  Node: backup-types,  Next: backup-methods,  Prev: backup-and-recovery,  Up: backup-and-recovery

7.1 Backup and Recovery Types
=============================

This section describes the characteristics of different types of
backups.

* Physical (Raw) Versus Logical Backups *

Physical backups consist of raw copies of the directories and files
that store database contents. This type of backup is suitable for
large, important databases that need to be recovered quickly when
problems occur.

Logical backups save information represented as logical database
structure (*Note `CREATE DATABASE': create-database, *Note `CREATE
TABLE': create-table. statements) and content (*Note `INSERT': insert.
statements or delimited-text files). This type of backup is suitable
for smaller amounts of data where you might edit the data values or
table structure, or recreate the data on a different machine
architecture.

Physical backup methods have these characteristics:

   * The backup consists of exact copies of database directories and
     files. Typically this is a copy of all or part of the MySQL data
     directory.

   * Physical backup methods are faster than logical because they
     involve only file copying without conversion.

   * Output is more compact than for logical backup.

   * Because backup speed and compactness are important for busy,
     important databases, the MySQL Enterprise Backup product performs
     physical backups. For an overview of the MySQL Enterprise Backup
     product, see *Note mysql-enterprise-backup::.

   * Backup and restore granularity ranges from the level of the entire
     data directory down to the level of individual files.  This may or
     may not provide for table-level granularity, depending on storage
     engine. For example, `InnoDB' tables can each be in a separate
     file, or share file storage with other `InnoDB' tables; each
     `MyISAM' table corresponds uniquely to a set of files.

   * In addition to databases, the backup can include any related files
     such as log or configuration files.

   * Data from `MEMORY' tables is tricky to back up this way because
     their contents are not stored on disk.  (The MySQL Enterprise
     Backup product has a feature where you can retrieve data from
     `MEMORY' tables during a backup.)

   * Backups are portable only to other machines that have identical or
     similar hardware characteristics.

   * Backups can be performed while the MySQL server is not running. If
     the server is running, it is necessary to perform appropriate
     locking so that the server does not change database contents
     during the backup. MySQL Enterprise Backup does this locking
     automatically for tables that require it.

   * Physical backup tools include the `mysqlbackup' of MySQL
     Enterprise Backup for `InnoDB' or any other tables, file
     system-level commands (such as `cp', `scp', `tar', `rsync'), or
     *Note `mysqlhotcopy': mysqlhotcopy.  for `MyISAM' tables.

   * For restore:

        * MySQL Enterprise Backup restores `InnoDB' and other tables
          that it backed up.

        * *Note `ndb_restore': mysql-cluster-programs-ndb-restore.
          restores *Note `NDB': mysql-cluster. tables.

        * Files copied at the file system level or with *Note
          `mysqlhotcopy': mysqlhotcopy. can be copied back to their
          original locations with file system commands.

Logical backup methods have these characteristics:

   * The backup is done by querying the MySQL server to obtain database
     structure and content information.

   * Backup is slower than physical methods because the server must
     access database information and convert it to logical format.  If
     the output is written on the client side, the server must also
     send it to the backup program.

   * Output is larger than for physical backup, particularly when saved
     in text format.

   * Backup and restore granularity is available at the server level
     (all databases), database level (all tables in a particular
     database), or table level. This is true regardless of storage
     engine.

   * The backup does not include log or configuration files, or other
     database-related files that are not part of databases.

   * Backups stored in logical format are machine independent and
     highly portable.

   * Logical backups are performed with the MySQL server running.  The
     server is not taken offline.

   * Logical backup tools include the *Note `mysqldump': mysqldump.
     program and the *Note `SELECT ... INTO OUTFILE': select.
     statement. These work for any storage engine, even `MEMORY'.

   * To restore logical backups, SQL-format dump files can be processed
     using the *Note `mysql': mysql. client. To load delimited-text
     files, use the *Note `LOAD DATA INFILE': load-data. statement or
     the *Note `mysqlimport': mysqlimport. client.

* Online Versus Offline Backups *

Online backups take place while the MySQL server is running so that the
database information can be obtained from the server.  Offline backups
take place while the server is stopped. This distinction can also be
described as `hot' versus `cold' backups; a `warm' backup is one where
the server remains running but locked against modifying data while you
access database files externally.

Online backup methods have these characteristics:

   * The backup is less intrusive to other clients, which can connect
     to the MySQL server during the backup and may be able to access
     data depending on what operations they need to perform.

   * Care must be taken to impose appropriate locking so that data
     modifications do not take place that would compromise backup
     integrity. The MySQL Enterprise Backup product does such locking
     automatically.

Offline backup methods have these characteristics:

   * Clients can be affected adversely because the server is
     unavailable during backup. For that reason, such backups are often
     taken from a replication slave server that can be taken offline
     without harming availability.

   * The backup procedure is simpler because there is no possibility of
     interference from client activity.

A similar distinction between online and offline applies for recovery
operations, and similar characteristics apply. However, it is more
likely that clients will be affected for online recovery than for
online backup because recovery requires stronger locking. During
backup, clients might be able to read data while it is being backed up.
Recovery modifies data and does not just read it, so clients must be
prevented from accessing data while it is being restored.

* Local Versus Remote Backups *

A local backup is performed on the same host where the MySQL server
runs, whereas a remote backup is done from a different host. For some
types of backups, the backup can be initiated from a remote host even
if the output is written locally on the server.  host.

   * *Note `mysqldump': mysqldump. can connect to local or remote
     servers. For SQL output (`CREATE' and *Note `INSERT': insert.
     statements), local or remote dumps can be done and generate output
     on the client.  For delimited-text output (with the `--tab'
     option), data files are created on the server host.

   * *Note `mysqlhotcopy': mysqlhotcopy. performs only local backups:
     It connects to the server to lock it against data modifications
     and then copies local table files.

   * *Note `SELECT ... INTO OUTFILE': select-into. can be initiated
     from a local or remote client host, but the output file is created
     on the server host.

   * Physical backup methods typically are initiated locally on the
     MySQL server host so that the server can be taken offline,
     although the destination for copied files might be remote.

* Snapshot Backups *

Some file system implementations enable `snapshots' to be taken. These
provide logical copies of the file system at a given point in time,
without requiring a physical copy of the entire file system. (For
example, the implementation may use copy-on-write techniques so that
only parts of the file system modified after the snapshot time need be
copied.) MySQL itself does not provide the capability for taking file
system snapshots.  It is available through third-party solutions such
as Veritas, LVM, or ZFS.

* Full Versus Incremental Backups *

A full backup includes all data managed by a MySQL server at a given
point in time. An incremental backup consists of the changes made to
the data during a given time span (from one point in time to another).
MySQL has different ways to perform full backups, such as those
described earlier in this section. Incremental backups are made
possible by enabling the server's binary log, which the server uses to
record data changes.

* Full Versus Point-in-Time (Incremental) Recovery *

A full recovery restores all data from a full backup. This restores the
server instance to the state that it had when the backup was made. If
that state is not sufficiently current, a full recovery can be followed
by recovery of incremental backups made since the full backup, to bring
the server to a more up-to-date state.

Incremental recovery is recovery of changes made during a given time
span. This is also called point-in-time recovery because it makes a
server's state current up to a given time. Point-in-time recovery is
based on the binary log and typically follows a full recovery from the
backup files that restores the server to its state when the backup was
made. Then the data changes written in the binary log files are applied
as incremental recovery to redo data modifications and bring the server
up to the desired point in time.

* Table Maintenance *

Data integrity can be compromised if tables become corrupt. For *Note
`InnoDB': innodb-storage-engine. tables, this is not a typical issue.
For programs to check *Note `MyISAM': myisam-storage-engine.  tables
and repair them if problems are found, see *Note
myisam-table-maintenance::.

* Backup Scheduling, Compression, and Encryption *

Backup scheduling is valuable for automating backup procedures.
Compression of backup output reduces space requirements, and encryption
of the output provides better security against unauthorized access of
backed-up data. MySQL itself does not provide these capabilities. The
MySQL Enterprise Backup product can compress `InnoDB' backups, and
compression or encryption of backup output can be achieved using file
system utilities. Other third-party solutions may be available.


File: manual.info,  Node: backup-methods,  Next: backup-strategy-example,  Prev: backup-types,  Up: backup-and-recovery

7.2 Database Backup Methods
===========================

This section summarizes some general methods for making backups.

* Making a Hot Backup with MySQL Enterprise Backup *

Customers of MySQL Enterprise Edition can use the MySQL Enterprise
Backup product to do physical backups of entire instances or selected
databases, tables, or both. This product includes features for
incremental and compressed backups.  Backing up the physical database
files makes restore much faster than logical techniques such as the
`mysqldump' command. `InnoDB' tables are copied using a hot backup
mechanism.  (Ideally, the `InnoDB' tables should represent a
substantial majority of the data.) Tables from other storage engines
are copied using a warm backup mechanism. For an overview of the MySQL
Enterprise Backup product, see *Note mysql-enterprise-backup::.

* Making Backups with *Note `mysqldump': mysqldump. or *Note
`mysqlhotcopy': mysqlhotcopy.  *

The *Note `mysqldump': mysqldump. program and the *Note `mysqlhotcopy':
mysqlhotcopy. script can make backups.  *Note `mysqldump': mysqldump.
is more general because it can back up all kinds of tables. *Note
`mysqlhotcopy': mysqlhotcopy. works only with some storage engines.
(See *Note using-mysqldump::, and *Note mysqlhotcopy::.)

For `InnoDB' tables, it is possible to perform an online backup that
takes no locks on tables using the `--single-transaction' option to
*Note `mysqldump': mysqldump. See *Note backup-policy::.

* Making Backups by Copying Table Files *

For storage engines that represent each table using its own files,
tables can be backed up by copying those files. For example, `MyISAM'
tables are stored as files, so it is easy to do a backup by copying
files (`*.frm', `*.MYD', and `*.MYI' files).  To get a consistent
backup, stop the server or lock and flush the relevant tables:

     FLUSH TABLES TBL_LIST WITH READ LOCK;

You need only a read lock; this enables other clients to continue to
query the tables while you are making a copy of the files in the
database directory. The flush is needed to ensure that the all active
index pages are written to disk before you start the backup. See *Note
lock-tables::, and *Note flush::.

You can also create a binary backup simply by copying all table files,
as long as the server isn't updating anything. The *Note
`mysqlhotcopy': mysqlhotcopy. script uses this method. (But note that
table file copying methods do not work if your database contains
`InnoDB' tables.  *Note `mysqlhotcopy': mysqlhotcopy. does not work for
`InnoDB' tables because `InnoDB' does not necessarily store table
contents in database directories.  Also, even if the server is not
actively updating data, `InnoDB' may still have modified data cached in
memory and not flushed to disk.)

* Making Delimited-Text File Backups *

To create a text file containing a table's data, you can use *Note
`SELECT * INTO OUTFILE 'FILE_NAME' FROM TBL_NAME': select-into. The
file is created on the MySQL server host, not the client host. For this
statement, the output file cannot already exist because permitting
files to be overwritten constitutes a security risk. See *Note
select::. This method works for any kind of data file, but saves only
table data, not the table structure.

Another way to create text data files (along with files containing
*Note `CREATE TABLE': create-table. statements for the backed up
tables) is to use *Note `mysqldump': mysqldump. with the `--tab'
option. See *Note mysqldump-delimited-text::.

To reload a delimited-text data file, use *Note `LOAD DATA INFILE':
load-data. or *Note `mysqlimport': mysqlimport.

* Making Incremental Backups by Enabling the Binary Log *

MySQL supports incremental backups: You must start the server with the
`--log-bin' option to enable binary logging; see *Note binary-log::.
The binary log files provide you with the information you need to
replicate changes to the database that are made subsequent to the point
at which you performed a backup. At the moment you want to make an
incremental backup (containing all changes that happened since the last
full or incremental backup), you should rotate the binary log by using
*Note `FLUSH LOGS': flush. This done, you need to copy to the backup
location all binary logs which range from the one of the moment of the
last full or incremental backup to the last but one. These binary logs
are the incremental backup; at restore time, you apply them as
explained in *Note point-in-time-recovery::. The next time you do a
full backup, you should also rotate the binary log using *Note `FLUSH
LOGS': flush, *Note `mysqldump --flush-logs': mysqldump, or *Note
`mysqlhotcopy --flushlog': mysqlhotcopy. See *Note mysqldump::, and
*Note mysqlhotcopy::.

* Making Backups Using Replication Slaves *

If you have performance problems with your master server while making
backups, one strategy that can help is to set up replication and
perform backups on the slave rather than on the master. See *Note
replication-solutions-backups::.

If you are backing up a slave replication server, you should back up
its `master.info' and `relay-log.info' files when you back up the
slave's databases, regardless of the backup method you choose.  These
information files are always needed to resume replication after you
restore the slave's data. If your slave is replicating *Note `LOAD DATA
INFILE': load-data. statements, you should also back up any
`SQL_LOAD-*' files that exist in the directory that the slave uses for
this purpose. The slave needs these files to resume replication of any
interrupted *Note `LOAD DATA INFILE': load-data. operations. The
location of this directory is the value of the `--slave-load-tmpdir'
option. If the server was not started with that option, the directory
location is the value of the `tmpdir' system variable.

* Recovering Corrupt Tables *

If you have to restore `MyISAM' tables that have become corrupt, try to
recover them using *Note `REPAIR TABLE': repair-table. or *Note
`myisamchk -r': myisamchk. first. That should work in 99.9% of all
cases. If *Note `myisamchk': myisamchk. fails, see *Note
myisam-table-maintenance::.

* Making Backups Using a File System Snapshot *

If you are using a Veritas file system, you can make a backup like this:

  1. From a client program, execute *Note `FLUSH TABLES WITH READ
     LOCK': flush.

  2. From another shell, execute `mount vxfs snapshot'.

  3. From the first client, execute *Note `UNLOCK TABLES': lock-tables.

  4. Copy files from the snapshot.

  5. Unmount the snapshot.

Similar snapshot capabilities may be available in other file systems,
such as LVM or ZFS.


File: manual.info,  Node: backup-strategy-example,  Next: using-mysqldump,  Prev: backup-methods,  Up: backup-and-recovery

7.3 Example Backup and Recovery Strategy
========================================

* Menu:

* backup-policy::                Establishing a Backup Policy
* recovery-from-backups::        Using Backups for Recovery
* backup-strategy-summary::      Backup Strategy Summary

This section discusses a procedure for performing backups that enables
you to recover data after several types of crashes:

   * Operating system crash

   * Power failure

   * File system crash

   * Hardware problem (hard drive, motherboard, and so forth)

The example commands do not include options such as `--user' and
`--password' for the *Note `mysqldump': mysqldump. and *Note `mysql':
mysql. client programs. You should include such options as necessary to
enable client programs to connect to the MySQL server.

Assume that data is stored in the `InnoDB' storage engine, which has
support for transactions and automatic crash recovery. Assume also that
the MySQL server is under load at the time of the crash. If it were
not, no recovery would ever be needed.

For cases of operating system crashes or power failures, we can assume
that MySQL's disk data is available after a restart. The `InnoDB' data
files might not contain consistent data due to the crash, but `InnoDB'
reads its logs and finds in them the list of pending committed and
noncommitted transactions that have not been flushed to the data files.
`InnoDB' automatically rolls back those transactions that were not
committed, and flushes to its data files those that were committed.
Information about this recovery process is conveyed to the user through
the MySQL error log. The following is an example log excerpt:

     InnoDB: Database was not shut down normally.
     InnoDB: Starting recovery from log files...
     InnoDB: Starting log scan based on checkpoint at
     InnoDB: log sequence number 0 13674004
     InnoDB: Doing recovery: scanned up to log sequence number 0 13739520
     InnoDB: Doing recovery: scanned up to log sequence number 0 13805056
     InnoDB: Doing recovery: scanned up to log sequence number 0 13870592
     InnoDB: Doing recovery: scanned up to log sequence number 0 13936128
     ...
     InnoDB: Doing recovery: scanned up to log sequence number 0 20555264
     InnoDB: Doing recovery: scanned up to log sequence number 0 20620800
     InnoDB: Doing recovery: scanned up to log sequence number 0 20664692
     InnoDB: 1 uncommitted transaction(s) which must be rolled back
     InnoDB: Starting rollback of uncommitted transactions
     InnoDB: Rolling back trx no 16745
     InnoDB: Rolling back of trx no 16745 completed
     InnoDB: Rollback of uncommitted transactions completed
     InnoDB: Starting an apply batch of log records to the database...
     InnoDB: Apply batch completed
     InnoDB: Started
     mysqld: ready for connections

For the cases of file system crashes or hardware problems, we can
assume that the MySQL disk data is _not_ available after a restart.
This means that MySQL fails to start successfully because some blocks
of disk data are no longer readable. In this case, it is necessary to
reformat the disk, install a new one, or otherwise correct the
underlying problem.  Then it is necessary to recover our MySQL data
from backups, which means that backups must already have been made. To
make sure that is the case, design and implement a backup policy.


File: manual.info,  Node: backup-policy,  Next: recovery-from-backups,  Prev: backup-strategy-example,  Up: backup-strategy-example

7.3.1 Establishing a Backup Policy
----------------------------------

To be useful, backups must be scheduled regularly. A full backup (a
snapshot of the data at a point in time) can be done in MySQL with
several tools. For example, *Note MySQL Enterprise Backup:
mysql-enterprise-backup. can perform a physical backup of an entire
instance, with optimizations to minimize overhead and avoid disruption
when backing up `InnoDB' data files; *Note `mysqldump': mysqldump.
provides online logical backup. This discussion uses *Note `mysqldump':
mysqldump.

Assume that we make a full backup of all our `InnoDB' tables in all
databases using the following command on Sunday at 1 p.m., when load is
low:

     shell> mysqldump --single-transaction --all-databases > backup_sunday_1_PM.sql

The resulting `.sql' file produced by *Note `mysqldump': mysqldump.
contains a set of SQL *Note `INSERT': insert. statements that can be
used to reload the dumped tables at a later time.

This backup operation acquires a global read lock on all tables at the
beginning of the dump (using *Note `FLUSH TABLES WITH READ LOCK':
flush.). As soon as this lock has been acquired, the binary log
coordinates are read and the lock is released. If long updating
statements are running when the *Note `FLUSH': flush. statement is
issued, the backup operation may stall until those statements finish.
After that, the dump becomes lock-free and does not disturb reads and
writes on the tables.

It was assumed earlier that the tables to back up are `InnoDB' tables,
so `--single-transaction' uses a consistent read and guarantees that
data seen by *Note `mysqldump': mysqldump. does not change. (Changes
made by other clients to `InnoDB' tables are not seen by the *Note
`mysqldump': mysqldump. process.) If the backup operation includes
nontransactional tables, consistency requires that they do not change
during the backup. For example, for the `MyISAM' tables in the `mysql'
database, there must be no administrative changes to MySQL accounts
during the backup.

Full backups are necessary, but it is not always convenient to create
them. They produce large backup files and take time to generate. They
are not optimal in the sense that each successive full backup includes
all data, even that part that has not changed since the previous full
backup. It is more efficient to make an initial full backup, and then
to make incremental backups. The incremental backups are smaller and
take less time to produce. The tradeoff is that, at recovery time, you
cannot restore your data just by reloading the full backup. You must
also process the incremental backups to recover the incremental changes.

To make incremental backups, we need to save the incremental changes.
In MySQL, these changes are represented in the binary log, so the MySQL
server should always be started with the `--log-bin' option to enable
that log. With binary logging enabled, the server writes each data
change into a file while it updates data. Looking at the data directory
of a MySQL server that was started with the `--log-bin' option and that
has been running for some days, we find these MySQL binary log files:

     -rw-rw---- 1 guilhem  guilhem   1277324 Nov 10 23:59 gbichot2-bin.000001
     -rw-rw---- 1 guilhem  guilhem         4 Nov 10 23:59 gbichot2-bin.000002
     -rw-rw---- 1 guilhem  guilhem        79 Nov 11 11:06 gbichot2-bin.000003
     -rw-rw---- 1 guilhem  guilhem       508 Nov 11 11:08 gbichot2-bin.000004
     -rw-rw---- 1 guilhem  guilhem 220047446 Nov 12 16:47 gbichot2-bin.000005
     -rw-rw---- 1 guilhem  guilhem    998412 Nov 14 10:08 gbichot2-bin.000006
     -rw-rw---- 1 guilhem  guilhem       361 Nov 14 10:07 gbichot2-bin.index

Each time it restarts, the MySQL server creates a new binary log file
using the next number in the sequence. While the server is running, you
can also tell it to close the current binary log file and begin a new
one manually by issuing a *Note `FLUSH LOGS': flush. SQL statement or
with a *Note `mysqladmin flush-logs': mysqladmin.  command. *Note
`mysqldump': mysqldump. also has an option to flush the logs. The
`.index' file in the data directory contains the list of all MySQL
binary logs in the directory.

The MySQL binary logs are important for recovery because they form the
set of incremental backups. If you make sure to flush the logs when you
make your full backup, the binary log files created afterward contain
all the data changes made since the backup. Let's modify the previous
*Note `mysqldump': mysqldump.  command a bit so that it flushes the
MySQL binary logs at the moment of the full backup, and so that the
dump file contains the name of the new current binary log:

     shell> mysqldump --single-transaction --flush-logs --master-data=2 \
              --all-databases > backup_sunday_1_PM.sql

After executing this command, the data directory contains a new binary
log file, `gbichot2-bin.000007', because the `--flush-logs' option
causes the server to flush its logs. The `--master-data' option causes
*Note `mysqldump': mysqldump. to write binary log information to its
output, so the resulting `.sql' dump file includes these lines:

     -- Position to start replication or point-in-time recovery from
     -- CHANGE MASTER TO MASTER_LOG_FILE='gbichot2-bin.000007',MASTER_LOG_POS=4;

Because the *Note `mysqldump': mysqldump. command made a full backup,
those lines mean two things:

   * The dump file contains all changes made before any changes written
     to the `gbichot2-bin.000007' binary log file or newer.

   * All data changes logged after the backup are not present in the
     dump file, but are present in the `gbichot2-bin.000007' binary log
     file or newer.

On Monday at 1 p.m., we can create an incremental backup by flushing
the logs to begin a new binary log file. For example, executing a *Note
`mysqladmin flush-logs': mysqladmin. command creates
`gbichot2-bin.000008'. All changes between the Sunday 1 p.m. full
backup and Monday 1 p.m. will be in the `gbichot2-bin.000007' file. This
incremental backup is important, so it is a good idea to copy it to a
safe place. (For example, back it up on tape or DVD, or copy it to
another machine.) On Tuesday at 1 p.m., execute another *Note
`mysqladmin flush-logs': mysqladmin. command. All changes between
Monday 1 p.m. and Tuesday 1 p.m. will be in the `gbichot2-bin.000008'
file (which also should be copied somewhere safe).

The MySQL binary logs take up disk space. To free up space, purge them
from time to time. One way to do this is by deleting the binary logs
that are no longer needed, such as when we make a full backup:

     shell> mysqldump --single-transaction --flush-logs --master-data=2 \
              --all-databases --delete-master-logs > backup_sunday_1_PM.sql

*Note*:

Deleting the MySQL binary logs with *Note `mysqldump
--delete-master-logs': mysqldump. can be dangerous if your server is a
replication master server, because slave servers might not yet fully
have processed the contents of the binary log.  The description for the
*Note `PURGE BINARY LOGS': purge-binary-logs. statement explains what
should be verified before deleting the MySQL binary logs. See *Note
purge-binary-logs::.


File: manual.info,  Node: recovery-from-backups,  Next: backup-strategy-summary,  Prev: backup-policy,  Up: backup-strategy-example

7.3.2 Using Backups for Recovery
--------------------------------

Now, suppose that we have a catastrophic crash on Wednesday at 8 a.m.
that requires recovery from backups. To recover, first we restore the
last full backup we have (the one from Sunday 1 p.m.). The full backup
file is just a set of SQL statements, so restoring it is very easy:

     shell> mysql < backup_sunday_1_PM.sql

At this point, the data is restored to its state as of Sunday 1 p.m..
To restore the changes made since then, we must use the incremental
backups; that is, the `gbichot2-bin.000007' and `gbichot2-bin.000008'
binary log files. Fetch the files if necessary from where they were
backed up, and then process their contents like this:

     shell> mysqlbinlog gbichot2-bin.000007 gbichot2-bin.000008 | mysql

We now have recovered the data to its state as of Tuesday 1 p.m., but
still are missing the changes from that date to the date of the crash.
To not lose them, we would have needed to have the MySQL server store
its MySQL binary logs into a safe location (RAID disks, SAN, ...)
different from the place where it stores its data files, so that these
logs were not on the destroyed disk. (That is, we can start the server
with a `--log-bin' option that specifies a location on a different
physical device from the one on which the data directory resides. That
way, the logs are safe even if the device containing the directory is
lost.) If we had done this, we would have the `gbichot2-bin.000009'
file (and any subsequent files) at hand, and we could apply them using
*Note `mysqlbinlog': mysqlbinlog. and *Note `mysql': mysql. to restore
the most recent data changes with no loss up to the moment of the crash:

     shell> mysqlbinlog gbichot2-bin.000009 ... | mysql

For more information about using *Note `mysqlbinlog': mysqlbinlog.  to
process binary log files, see *Note point-in-time-recovery::.


File: manual.info,  Node: backup-strategy-summary,  Prev: recovery-from-backups,  Up: backup-strategy-example

7.3.3 Backup Strategy Summary
-----------------------------

In case of an operating system crash or power failure, `InnoDB' itself
does all the job of recovering data. But to make sure that you can
sleep well, observe the following guidelines:

   * Always run the MySQL server with the `--log-bin' option, or even
     `--log-bin=LOG_NAME', where the log file name is located on some
     safe media different from the drive on which the data directory is
     located. If you have such safe media, this technique can also be
     good for disk load balancing (which results in a performance
     improvement).

   * Make periodic full backups, using the *Note `mysqldump':
     mysqldump. command shown earlier in *Note backup-policy::, that
     makes an online, nonblocking backup.

   * Make periodic incremental backups by flushing the logs with *Note
     `FLUSH LOGS': flush.  or *Note `mysqladmin flush-logs': mysqladmin.


File: manual.info,  Node: using-mysqldump,  Next: point-in-time-recovery,  Prev: backup-strategy-example,  Up: backup-and-recovery

7.4 Using `mysqldump' for Backups
=================================

* Menu:

* mysqldump-sql-format::         Dumping Data in SQL Format with `mysqldump'
* reloading-sql-format-dumps::   Reloading SQL-Format Backups
* mysqldump-delimited-text::     Dumping Data in Delimited-Text Format with `mysqldump'
* reloading-delimited-text-dumps::  Reloading Delimited-Text Format Backups
* mysqldump-tips::               `mysqldump' Tips

This section describes how to use *Note `mysqldump': mysqldump. to
produce dump files, and how to reload dump files. A dump file can be
used in several ways:

   * As a backup to enable data recovery in case of data loss.

   * As a source of data for setting up replication slaves.

   * As a source of data for experimentation:

        * To make a copy of a database that you can use without
          changing the original data.

        * To test potential upgrade incompatibilities.

*Note `mysqldump': mysqldump. produces two types of output, depending
on whether the `--tab' option is given:

   * Without `--tab', *Note `mysqldump': mysqldump. writes SQL
     statements to the standard output. This output consists of
     `CREATE' statements to create dumped objects (databases, tables,
     stored routines, and so forth), and `INSERT' statements to load
     data into tables.  The output can be saved in a file and reloaded
     later using *Note `mysql': mysql. to recreate the dumped objects.
     Options are available to modify the format of the SQL statements,
     and to control which objects are dumped.

   * With `--tab', *Note `mysqldump': mysqldump. produces two output
     files for each dumped table. The server writes one file as
     tab-delimited text, one line per table row. This file is named
     `TBL_NAME.txt' in the output directory. The server also sends a
     *Note `CREATE TABLE': create-table. statement for the table to
     *Note `mysqldump': mysqldump, which writes it as a file named
     `TBL_NAME.sql' in the output directory.


File: manual.info,  Node: mysqldump-sql-format,  Next: reloading-sql-format-dumps,  Prev: using-mysqldump,  Up: using-mysqldump

7.4.1 Dumping Data in SQL Format with `mysqldump'
-------------------------------------------------

This section describes how to use *Note `mysqldump': mysqldump.  to
create SQL-format dump files. For information about reloading such dump
files, see *Note reloading-sql-format-dumps::.

By default, *Note `mysqldump': mysqldump. writes information as SQL
statements to the standard output. You can save the output in a file:

     shell> mysqldump [ARGUMENTS] > FILE_NAME

To dump all databases, invoke *Note `mysqldump': mysqldump. with the
`--all-databases' option:

     shell> mysqldump --all-databases > dump.sql

To dump only specific databases, name them on the command line and use
the `--databases' option:

     shell> mysqldump --databases db1 db2 db3 > dump.sql

The `--databases' option causes all names on the command line to be
treated as database names.  Without this option, *Note `mysqldump':
mysqldump. treats the first name as a database name and those following
as table names.

With `--all-databases' or `--databases', *Note `mysqldump': mysqldump.
writes *Note `CREATE DATABASE': create-database. and *Note `USE': use.
statements prior to the dump output for each database. This ensures
that when the dump file is reloaded, it creates each database if it
does not exist and makes it the default database so database contents
are loaded into the same database from which they came. If you want to
cause the dump file to force a drop of each database before recreating
it, use the `--add-drop-database' option as well. In this case, *Note
`mysqldump': mysqldump. writes a *Note `DROP DATABASE': drop-database.
statement preceding each *Note `CREATE DATABASE': create-database.
statement.

To dump a single database, name it on the command line:

     shell> mysqldump --databases test > dump.sql

In the single-database case, it is permissible to omit the
`--databases' option:

     shell> mysqldump test > dump.sql

The difference between the two preceding commands is that without
`--databases', the dump output contains no *Note `CREATE DATABASE':
create-database. or *Note `USE': use.  statements. This has several
implications:

   * When you reload the dump file, you must specify a default database
     name so that the server knows which database to reload.

   * For reloading, you can specify a database name different from the
     original name, which enables you to reload the data into a
     different database.

   * If the database to be reloaded does not exist, you must create it
     first.

   * Because the output will contain no *Note `CREATE DATABASE':
     create-database. statement, the `--add-drop-database' option has
     no effect. If you use it, it produces no *Note `DROP DATABASE':
     drop-database. statement.

To dump only specific tables from a database, name them on the command
line following the database name:

     shell> mysqldump test t1 t3 t7 > dump.sql


File: manual.info,  Node: reloading-sql-format-dumps,  Next: mysqldump-delimited-text,  Prev: mysqldump-sql-format,  Up: using-mysqldump

7.4.2 Reloading SQL-Format Backups
----------------------------------

To reload a dump file written by *Note `mysqldump': mysqldump.  that
consists of SQL statements, use it as input to the *Note `mysql':
mysql. client. If the dump file was created by *Note `mysqldump':
mysqldump. with the `--all-databases' or `--databases' option, it
contains *Note `CREATE DATABASE': create-database. and *Note `USE':
use. statements and it is not necessary to specify a default database
into which to load the data:

     shell> mysql < dump.sql

Alternatively, from within *Note `mysql': mysql, use a `source' command:

     mysql> source dump.sql

If the file is a single-database dump not containing *Note `CREATE
DATABASE': create-database. and *Note `USE': use. statements, create the
database first (if necessary):

     shell> mysqladmin create db1

Then specify the database name when you load the dump file:

     shell> mysql db1 < dump.sql

Alternatively, from within *Note `mysql': mysql, create the database,
select it as the default database, and load the dump file:

     mysql> CREATE DATABASE IF NOT EXISTS db1;
     mysql> USE db1;
     mysql> source dump.sql


File: manual.info,  Node: mysqldump-delimited-text,  Next: reloading-delimited-text-dumps,  Prev: reloading-sql-format-dumps,  Up: using-mysqldump

7.4.3 Dumping Data in Delimited-Text Format with `mysqldump'
------------------------------------------------------------

This section describes how to use *Note `mysqldump': mysqldump.  to
create delimited-text dump files. For information about reloading such
dump files, see *Note reloading-delimited-text-dumps::.

If you invoke *Note `mysqldump': mysqldump. with the `--tab=DIR_NAME'
option, it uses DIR_NAME as the output directory and dumps tables
individually in that directory using two files for each table. The
table name is the basename for these files. For a table named `t1', the
files are named `t1.sql' and `t1.txt'. The `.sql' file contains a *Note
`CREATE TABLE': create-table. statement for the table. The `.txt' file
contains the table data, one line per table row.

The following command dumps the contents of the `db1' database to files
in the `/tmp' database:

     shell> mysqldump --tab=/tmp db1

The `.txt' files containing table data are written by the server, so
they are owned by the system account used for running the server. The
server uses *Note `SELECT ... INTO OUTFILE': select-into. to write the
files, so you must have the `FILE' privilege to perform this operation,
and an error occurs if a given `.txt' file already exists.

The server sends the `CREATE' definitions for dumped tables to *Note
`mysqldump': mysqldump, which writes them to `.sql' files. These files
therefore are owned by the user who executes *Note `mysqldump':
mysqldump.

It is best that `--tab' be used only for dumping a local server. If you
use it with a remote server, the `--tab' directory must exist on both
the local and remote hosts, and the `.txt' files will be written by the
server in the remote directory (on the server host), whereas the `.sql'
files will be written by *Note `mysqldump': mysqldump. in the local
directory (on the client host).

For *Note `mysqldump --tab': mysqldump, the server by default writes
table data to `.txt' files one line per row with tabs between column
values, no quotation marks around column values, and newline as the
line terminator. (These are the same defaults as for *Note `SELECT ...
INTO OUTFILE': select-into.)

To enable data files to be written using a different format, *Note
`mysqldump': mysqldump. supports these options:

   * `--fields-terminated-by=STR'

     The string for separating column values (default: tab).

   * `--fields-enclosed-by=CHAR'

     The character within which to enclose column values (default: no
     character).

   * `--fields-optionally-enclosed-by=CHAR'

     The character within which to enclose non-numeric column values
     (default: no character).

   * `--fields-escaped-by=CHAR'

     The character for escaping special characters (default: no
     escaping).

   * `--lines-terminated-by=STR'

     The line-termination string (default: newline).

Depending on the value you specify for any of these options, it might
be necessary on the command line to quote or escape the value
appropriately for your command interpreter. Alternatively, specify the
value using hex notation. Suppose that you want *Note `mysqldump':
mysqldump. to quote column values within double quotation marks. To do
so, specify double quote as the value for the `--fields-enclosed-by'
option. But this character is often special to command interpreters and
must be treated specially. For example, on Unix, you can quote the
double quote like this:

     --fields-enclosed-by='"'

On any platform, you can specify the value in hex:

     --fields-enclosed-by=0x22

It is common to use several of the data-formatting options together.
For example, to dump tables in comma-separated values format with lines
terminated by carriage-return/newline pairs (`\r\n'), use this command
(enter it on a single line):

     shell> mysqldump --tab=/tmp --fields-terminated-by=,
              --fields-enclosed-by='"' --lines-terminated-by=0x0d0a db1

Should you use any of the data-formatting options to dump table data,
you will need to specify the same format when you reload data files
later, to ensure proper interpretation of the file contents.


File: manual.info,  Node: reloading-delimited-text-dumps,  Next: mysqldump-tips,  Prev: mysqldump-delimited-text,  Up: using-mysqldump

7.4.4 Reloading Delimited-Text Format Backups
---------------------------------------------

For backups produced with *Note `mysqldump --tab': mysqldump, each
table is represented in the output directory by an `.sql' file
containing the *Note `CREATE TABLE': create-table. statement for the
table, and a `.txt' file containing the table data. To reload a table,
first change location into the output directory. Then process the
`.sql' file with *Note `mysql': mysql. to create an empty table and
process the `.txt' file to load the data into the table:

     shell> mysql db1 < t1.sql
     shell> mysqlimport db1 t1.txt

An alternative to using *Note `mysqlimport': mysqlimport. to load the
data file is to use the *Note `LOAD DATA INFILE': load-data. statement
from within the *Note `mysql': mysql. client:

     mysql> USE db1;
     mysql> LOAD DATA INFILE 't1.txt' INTO TABLE t1;

If you used any data-formatting options with *Note `mysqldump':
mysqldump. when you initially dumped the table, you must use the same
options with *Note `mysqlimport': mysqlimport. or *Note `LOAD DATA
INFILE': load-data. to ensure proper interpretation of the data file
contents:

     shell> mysqlimport --fields-terminated-by=,
              --fields-enclosed-by='"' --lines-terminated-by=0x0d0a db1 t1.txt

Or:

     mysql> USE db1;
     mysql> LOAD DATA INFILE 't1.txt' INTO TABLE t1
         -> FIELDS TERMINATED BY ',' FIELDS ENCLOSED BY '"'
         -> LINES TERMINATED BY '\r\n';


File: manual.info,  Node: mysqldump-tips,  Prev: reloading-delimited-text-dumps,  Up: using-mysqldump

7.4.5 `mysqldump' Tips
----------------------

* Menu:

* mysqldump-copying-database::   Making a Copy of a Database
* mysqldump-copying-to-other-server::  Copy a Database from one Server to Another
* mysqldump-stored-programs::    Dumping Stored Programs
* mysqldump-definition-data-dumps::  Dumping Table Definitions and Content Separately
* mysqldump-upgrade-testing::    Using `mysqldump' to Test for Upgrade Incompatibilities

This section surveys techniques that enable you to use *Note
`mysqldump': mysqldump. to solve specific problems:

   * How to make a copy a database

   * How to copy a database from one server to another

   * How to dump stored programs (stored procedures and functions,
     triggers, and events)

   * How to dump definitions and data separately


File: manual.info,  Node: mysqldump-copying-database,  Next: mysqldump-copying-to-other-server,  Prev: mysqldump-tips,  Up: mysqldump-tips

7.4.5.1 Making a Copy of a Database
...................................

     shell> mysqldump db1 > dump.sql
     shell> mysqladmin create db2
     shell> mysql db2 < dump.sql

Do not use `--databases' on the *Note `mysqldump': mysqldump. command
line because that causes `USE db1' to be included in the dump file,
which overrides the effect of naming `db2' on the *Note `mysql': mysql.
command line.


File: manual.info,  Node: mysqldump-copying-to-other-server,  Next: mysqldump-stored-programs,  Prev: mysqldump-copying-database,  Up: mysqldump-tips

7.4.5.2 Copy a Database from one Server to Another
..................................................

On Server 1:

     shell> mysqldump --databases db1 > dump.sql

Copy the dump file from Server 1 to Server 2.

On Server 2:

     shell> mysql < dump.sql

Use of `--databases' with the *Note `mysqldump': mysqldump. command
line causes the dump file to include *Note `CREATE DATABASE':
create-database. and *Note `USE': use. statements that create the
database if it does exist and make it the default database for the
reloaded data.

Alternatively, you can omit `--databases' from the *Note `mysqldump':
mysqldump. command. Then you will need to create the database on Server
2 (if necessary) and specify it as the default database when you reload
the dump file.

On Server 1:

     shell> mysqldump db1 > dump.sql

On Server 2:

     shell> mysqladmin create db1
     shell> mysql db1 < dump.sql

You can specify a different database name in this case, so omitting
`--databases' from the *Note `mysqldump': mysqldump. command enables
you to dump data from one database and load it into another.


File: manual.info,  Node: mysqldump-stored-programs,  Next: mysqldump-definition-data-dumps,  Prev: mysqldump-copying-to-other-server,  Up: mysqldump-tips

7.4.5.3 Dumping Stored Programs
...............................

Several options control how *Note `mysqldump': mysqldump.  handles
stored programs (stored procedures and functions, triggers, and events):

   * `--events': Dump Event Scheduler events

   * `--routines': Dump stored procedures and functions

   * `--triggers': Dump triggers for tables

The `--triggers' option is enabled by default so that when tables are
dumped, they are accompanied by any triggers they have. The other
options are disabled by default and must be specified explicitly to dump
the corresponding objects. To disable any of these options explicitly,
use its skip form: `--skip-events', `--skip-routines', or
`--skip-triggers'.


File: manual.info,  Node: mysqldump-definition-data-dumps,  Next: mysqldump-upgrade-testing,  Prev: mysqldump-stored-programs,  Up: mysqldump-tips

7.4.5.4 Dumping Table Definitions and Content Separately
........................................................

The `--no-data' option tells *Note `mysqldump': mysqldump. not to dump
table data, resulting in the dump file containing only statements to
create the tables. Conversely, the `--no-create-info' option tells
*Note `mysqldump': mysqldump. to suppress `CREATE' statements from the
output, so that the dump file contains only table data.

For example, to dump table definitions and data separately for the
`test' database, use these commands:

     shell> mysqldump --no-data test > dump-defs.sql
     shell> mysqldump --no-create-info test > dump-data.sql

For a definition-only dump, add the `--routines' and `--events' options
to also include stored routine and event definitions:

     shell> mysqldump --no-data --routines --events test > dump-defs.sql


File: manual.info,  Node: mysqldump-upgrade-testing,  Prev: mysqldump-definition-data-dumps,  Up: mysqldump-tips

7.4.5.5 Using `mysqldump' to Test for Upgrade Incompatibilities
...............................................................

When contemplating a MySQL upgrade, it is prudent to install the newer
version separately from your current production version. Then you can
dump the database and database object definitions from the production
server and load them into the new server to verify that they are
handled properly. (This is also useful for testing downgrades.)

On the production server:

     shell> mysqldump --all-databases --no-data --routines --events > dump-defs.sql

On the upgraded server:

     shell> mysql < dump-defs.sql

Because the dump file does not contain table data, it can be processed
quickly. This enables you to spot potential incompatibilities without
waiting for lengthy data-loading operations. Look for warnings or
errors while the dump file is being processed.

After you have verified that the definitions are handled properly, dump
the data and try to load it into the upgraded server.

On the production server:

     shell> mysqldump --all-databases --no-create-info > dump-data.sql

On the upgraded server:

     shell> mysql < dump-data.sql

Now check the table contents and run some test queries.


File: manual.info,  Node: point-in-time-recovery,  Next: myisam-table-maintenance,  Prev: using-mysqldump,  Up: backup-and-recovery

7.5 Point-in-Time (Incremental) Recovery Using the Binary Log
=============================================================

* Menu:

* point-in-time-recovery-times::  Point-in-Time Recovery Using Event Times
* point-in-time-recovery-positions::  Point-in-Time Recovery Using Event Positions

Point-in-time recovery refers to recovery of data changes made since a
given point in time. Typically, this type of recovery is performed
after restoring a full backup that brings the server to its state as of
the time the backup was made. (The full backup can be made in several
ways, such as those listed in *Note backup-methods::.) Point-in-time
recovery then brings the server up to date incrementally from the time
of the full backup to a more recent time.

Point-in-time recovery is based on these principles:

   * The source of information for point-in-time recovery is the set of
     incremental backups represented by the binary log files generated
     subsequent to the full backup operation. Therefore, the server
     must be started with the `--log-bin' option to enable binary
     logging (see *Note binary-log::).

     To restore data from the binary log, you must know the name and
     location of the current binary log files. By default, the server
     creates binary log files in the data directory, but a path name
     can be specified with the `--log-bin' option to place the files in
     a different location. *Note binary-log::.

     To see a listing of all binary log files, use this statement:

          mysql> SHOW BINARY LOGS;

     To determine the name of the current binary log file, issue the
     following statement:

          mysql> SHOW MASTER STATUS;

   * The *Note `mysqlbinlog': mysqlbinlog. utility converts the events
     in the binary log files from binary format to text so that they
     can be executed or viewed. *Note `mysqlbinlog': mysqlbinlog.  has
     options for selecting sections of the binary log based on event
     times or position of events within the log. See *Note
     mysqlbinlog::.

   * Executing events from the binary log causes the data modifications
     they represent to be redone. This enables recovery of data changes
     for a given span of time. To execute events from the binary log,
     process *Note `mysqlbinlog': mysqlbinlog. output using the *Note
     `mysql': mysql. client:

          shell> mysqlbinlog BINLOG_FILES | mysql -u root -p

   * Viewing log contents can be useful when you need to determine
     event times or positions to select partial log contents prior to
     executing events. To view events from the log, send *Note
     `mysqlbinlog': mysqlbinlog. output into a paging program:

          shell> mysqlbinlog BINLOG_FILES | more

     Alternatively, save the output in a file and view the file in a
     text editor:

          shell> mysqlbinlog BINLOG_FILES > tmpfile
          shell> ... EDIT TMPFILE ...

   * Saving the output in a file is useful as a preliminary to
     executing the log contents with certain events removed, such as an
     accidental *Note `DROP DATABASE': drop-database.  You can delete
     from the file any statements not to be executed before executing
     its contents. After editing the file, execute the contents as
     follows:

          shell> mysql -u root -p < tmpfile

If you have more than one binary log to execute on the MySQL server,
the safe method is to process them all using a single connection to the
server. Here is an example that demonstrates what may be _unsafe_:

     shell> mysqlbinlog binlog.000001 | mysql -u root -p # DANGER!!
     shell> mysqlbinlog binlog.000002 | mysql -u root -p # DANGER!!

Processing binary logs this way using different connections to the
server causes problems if the first log file contains a *Note `CREATE
TEMPORARY TABLE': create-table. statement and the second log contains a
statement that uses the temporary table. When the first *Note `mysql':
mysql. process terminates, the server drops the temporary table. When
the second *Note `mysql': mysql. process attempts to use the table, the
server reports `unknown table.'

To avoid problems like this, use a _single_ connection to execute the
contents of all binary logs that you want to process. Here is one way
to do so:

     shell> mysqlbinlog binlog.000001 binlog.000002 | mysql -u root -p

Another approach is to write all the logs to a single file and then
process the file:

     shell> mysqlbinlog binlog.000001 >  /tmp/statements.sql
     shell> mysqlbinlog binlog.000002 >> /tmp/statements.sql
     shell> mysql -u root -p -e "source /tmp/statements.sql"


File: manual.info,  Node: point-in-time-recovery-times,  Next: point-in-time-recovery-positions,  Prev: point-in-time-recovery,  Up: point-in-time-recovery

7.5.1 Point-in-Time Recovery Using Event Times
----------------------------------------------

To indicate the start and end times for recovery, specify the
`--start-datetime' and `--stop-datetime' options for *Note
`mysqlbinlog': mysqlbinlog, in *Note `DATETIME': datetime. format. As
an example, suppose that exactly at 10:00 a.m. on April 20, 2005 an SQL
statement was executed that deleted a large table. To restore the table
and data, you could restore the previous night's backup, and then
execute the following command:

     shell> mysqlbinlog --stop-datetime="2005-04-20 9:59:59" \
              /var/log/mysql/bin.123456 | mysql -u root -p

This command recovers all of the data up until the date and time given
by the `--stop-datetime' option. If you did not detect the erroneous
SQL statement that was entered until hours later, you will probably
also want to recover the activity that occurred afterward. Based on
this, you could run *Note `mysqlbinlog': mysqlbinlog. again with a
start date and time, like so:

     shell> mysqlbinlog --start-datetime="2005-04-20 10:01:00" \
              /var/log/mysql/bin.123456 | mysql -u root -p

In this command, the SQL statements logged from 10:01 a.m. on will be
re-executed. The combination of restoring of the previous night's dump
file and the two *Note `mysqlbinlog': mysqlbinlog. commands restores
everything up until one second before 10:00 a.m. and everything from
10:01 a.m. on.

To use this method of point-in-time recovery, you should examine the
log to be sure of the exact times to specify for the commands. To
display the log file contents without executing them, use this command:

     shell> mysqlbinlog /var/log/mysql/bin.123456 > /tmp/mysql_restore.sql

Then open the `/tmp/mysql_restore.sql' file with a text editor to
examine it.

Excluding specific changes by specifying times for *Note `mysqlbinlog':
mysqlbinlog. does not work well if multiple statements executed at the
same time as the one to be excluded.


File: manual.info,  Node: point-in-time-recovery-positions,  Prev: point-in-time-recovery-times,  Up: point-in-time-recovery

7.5.2 Point-in-Time Recovery Using Event Positions
--------------------------------------------------

Instead of specifying dates and times, the `--start-position' and
`--stop-position' options for *Note `mysqlbinlog': mysqlbinlog. can be
used for specifying log positions. They work the same as the start and
stop date options, except that you specify log position numbers rather
than dates. Using positions may enable you to be more precise about
which part of the log to recover, especially if many transactions
occurred around the same time as a damaging SQL statement. To determine
the position numbers, run *Note `mysqlbinlog': mysqlbinlog. for a range
of times near the time when the unwanted transaction was executed, but
redirect the results to a text file for examination. This can be done
like so:

     shell> mysqlbinlog --start-datetime="2005-04-20 9:55:00" \
              --stop-datetime="2005-04-20 10:05:00" \
              /var/log/mysql/bin.123456 > /tmp/mysql_restore.sql

This command creates a small text file in the `/tmp' directory that
contains the SQL statements around the time that the deleterious SQL
statement was executed. Open this file with a text editor and look for
the statement that you do not want to repeat. Determine the positions
in the binary log for stopping and resuming the recovery and make note
of them. Positions are labeled as `log_pos' followed by a number. After
restoring the previous backup file, use the position numbers to process
the binary log file. For example, you would use commands something like
these:

     shell> mysqlbinlog --stop-position=368312 /var/log/mysql/bin.123456 \
              | mysql -u root -p

     shell> mysqlbinlog --start-position=368315 /var/log/mysql/bin.123456 \
              | mysql -u root -p

The first command recovers all the transactions up until the stop
position given. The second command recovers all transactions from the
starting position given until the end of the binary log. Because the
output of *Note `mysqlbinlog': mysqlbinlog. includes `SET TIMESTAMP'
statements before each SQL statement recorded, the recovered data and
related MySQL logs will reflect the original times at which the
transactions were executed.


File: manual.info,  Node: myisam-table-maintenance,  Prev: point-in-time-recovery,  Up: backup-and-recovery

7.6 `MyISAM' Table Maintenance and Crash Recovery
=================================================

* Menu:

* myisam-crash-recovery::        Using `myisamchk' for Crash Recovery
* myisam-check::                 How to Check `MyISAM' Tables for Errors
* myisam-repair::                How to Repair `MyISAM' Tables
* myisam-optimization::          `MyISAM' Table Optimization
* myisam-maintenance-schedule::  Setting Up a `MyISAM' Table Maintenance Schedule

This section discusses how to use *Note `myisamchk': myisamchk. to
check or repair `MyISAM' tables (tables that have `.MYD' and `.MYI'
files for storing data and indexes). For general *Note `myisamchk':
myisamchk. background, see *Note myisamchk::. Other table-repair
information can be found at *Note rebuilding-tables::.

You can use *Note `myisamchk': myisamchk. to check, repair, or optimize
database tables. The following sections describe how to perform these
operations and how to set up a table maintenance schedule. For
information about using *Note `myisamchk': myisamchk.  to get
information about your tables, see *Note myisamchk-table-info::.

Even though table repair with *Note `myisamchk': myisamchk. is quite
secure, it is always a good idea to make a backup _before_ doing a
repair or any maintenance operation that could make a lot of changes to
a table.

*Note `myisamchk': myisamchk. operations that affect indexes can cause
`FULLTEXT' indexes to be rebuilt with full-text parameters that are
incompatible with the values used by the MySQL server. To avoid this
problem, follow the guidelines in *Note myisamchk-general-options::.

`MyISAM' table maintenance can also be done using the SQL statements
that perform operations similar to what *Note `myisamchk': myisamchk.
can do:

   * To check `MyISAM' tables, use *Note `CHECK TABLE': check-table.

   * To repair `MyISAM' tables, use *Note `REPAIR TABLE': repair-table.

   * To optimize `MyISAM' tables, use *Note `OPTIMIZE TABLE':
     optimize-table.

   * To analyze `MyISAM' tables, use *Note `ANALYZE TABLE':
     analyze-table.

For additional information about these statements, see *Note
table-maintenance-sql::.

These statements can be used directly or by means of the *Note
`mysqlcheck': mysqlcheck. client program. One advantage of these
statements over *Note `myisamchk': myisamchk. is that the server does
all the work. With *Note `myisamchk': myisamchk, you must make sure
that the server does not use the tables at the same time so that there
is no unwanted interaction between *Note `myisamchk': myisamchk. and
the server.


File: manual.info,  Node: myisam-crash-recovery,  Next: myisam-check,  Prev: myisam-table-maintenance,  Up: myisam-table-maintenance

7.6.1 Using `myisamchk' for Crash Recovery
------------------------------------------

This section describes how to check for and deal with data corruption
in MySQL databases. If your tables become corrupted frequently, you
should try to find the reason why. See *Note crashing::.

For an explanation of how `MyISAM' tables can become corrupted, see
*Note myisam-table-problems::.

If you run *Note `mysqld': mysqld. with external locking disabled
(which is the default), you cannot reliably use *Note `myisamchk':
myisamchk. to check a table when *Note `mysqld': mysqld. is using the
same table. If you can be certain that no one will access the tables
through *Note `mysqld': mysqld. while you run *Note `myisamchk':
myisamchk, you only have to execute *Note `mysqladmin flush-tables':
mysqladmin. before you start checking the tables. If you cannot
guarantee this, you must stop *Note `mysqld': mysqld. while you check
the tables. If you run *Note `myisamchk': myisamchk. to check tables
that *Note `mysqld': mysqld. is updating at the same time, you may get
a warning that a table is corrupt even when it is not.

If the server is run with external locking enabled, you can use *Note
`myisamchk': myisamchk. to check tables at any time. In this case, if
the server tries to update a table that *Note `myisamchk': myisamchk.
is using, the server will wait for *Note `myisamchk': myisamchk. to
finish before it continues.

If you use *Note `myisamchk': myisamchk. to repair or optimize tables,
you _must_ always ensure that the *Note `mysqld': mysqld. server is not
using the table (this also applies if external locking is disabled). If
you do not stop *Note `mysqld': mysqld, you should at least do a *Note
`mysqladmin flush-tables': mysqladmin. before you run *Note
`myisamchk': myisamchk. Your tables _may become corrupted_ if the
server and *Note `myisamchk': myisamchk. access the tables
simultaneously.

When performing crash recovery, it is important to understand that each
`MyISAM' table TBL_NAME in a database corresponds to the three files in
the database directory shown in the following table.

This table lists the three files in the database directory that
correspond to each `MyISAM' table.

File           Purpose
`TBL_NAME.frm' Definition (format) file
`TBL_NAME.MYD' Data file
`TBL_NAME.MYI' Index file

Each of these three file types is subject to corruption in various
ways, but problems occur most often in data files and index files.

*Note `myisamchk': myisamchk. works by creating a copy of the `.MYD'
data file row by row. It ends the repair stage by removing the old
`.MYD' file and renaming the new file to the original file name. If you
use `--quick', *Note `myisamchk': myisamchk. does not create a temporary
`.MYD' file, but instead assumes that the `.MYD' file is correct and
generates only a new index file without touching the `.MYD' file. This
is safe, because *Note `myisamchk': myisamchk.  automatically detects
whether the `.MYD' file is corrupt and aborts the repair if it is. You
can also specify the `--quick' option twice to *Note `myisamchk':
myisamchk. In this case, *Note `myisamchk': myisamchk. does not abort
on some errors (such as duplicate-key errors) but instead tries to
resolve them by modifying the `.MYD' file. Normally the use of two
`--quick' options is useful only if you have too little free disk space
to perform a normal repair. In this case, you should at least make a
backup of the table before running *Note `myisamchk': myisamchk.


File: manual.info,  Node: myisam-check,  Next: myisam-repair,  Prev: myisam-crash-recovery,  Up: myisam-table-maintenance

7.6.2 How to Check `MyISAM' Tables for Errors
---------------------------------------------

To check a `MyISAM' table, use the following commands:

   * *Note `myisamchk TBL_NAME': myisamchk.

     This finds 99.99% of all errors. What it cannot find is corruption
     that involves _only_ the data file (which is very unusual). If you
     want to check a table, you should normally run *Note `myisamchk':
     myisamchk. without options or with the `-s' (silent) option.

   * *Note `myisamchk -m TBL_NAME': myisamchk.

     This finds 99.999% of all errors. It first checks all index
     entries for errors and then reads through all rows. It calculates
     a checksum for all key values in the rows and verifies that the
     checksum matches the checksum for the keys in the index tree.

   * *Note `myisamchk -e TBL_NAME': myisamchk.

     This does a complete and thorough check of all data (`-e' means
     `extended check').  It does a check-read of every key for each row
     to verify that they indeed point to the correct row. This may take
     a long time for a large table that has many indexes. Normally,
     *Note `myisamchk': myisamchk. stops after the first error it
     finds. If you want to obtain more information, you can add the
     `-v' (verbose) option. This causes *Note `myisamchk': myisamchk.
     to keep going, up through a maximum of 20 errors.

   * *Note `myisamchk -e -i TBL_NAME': myisamchk.

     This is like the previous command, but the `-i' option tells *Note
     `myisamchk': myisamchk. to print additional statistical
     information.

In most cases, a simple *Note `myisamchk': myisamchk. command with no
arguments other than the table name is sufficient to check a table.


File: manual.info,  Node: myisam-repair,  Next: myisam-optimization,  Prev: myisam-check,  Up: myisam-table-maintenance

7.6.3 How to Repair `MyISAM' Tables
-----------------------------------

The discussion in this section describes how to use *Note `myisamchk':
myisamchk. on `MyISAM' tables (extensions `.MYI' and `.MYD').

You can also use the *Note `CHECK TABLE': check-table.  and *Note
`REPAIR TABLE': repair-table. statements to check and repair `MyISAM'
tables. See *Note check-table::, and *Note repair-table::.

Symptoms of corrupted tables include queries that abort unexpectedly
and observable errors such as these:

   * `TBL_NAME.frm' is locked against change

   * Can't find file `TBL_NAME.MYI' (Errcode: NNN)

   * Unexpected end of file

   * Record file is crashed

   * Got error NNN from table handler

To get more information about the error, run *Note `perror': perror.
NNN, where NNN is the error number. The following example shows how to
use *Note `perror': perror. to find the meanings for the most common
error numbers that indicate a problem with a table:

     shell> perror 126 127 132 134 135 136 141 144 145
     MySQL error code 126 = Index file is crashed
     MySQL error code 127 = Record-file is crashed
     MySQL error code 132 = Old database file
     MySQL error code 134 = Record was already deleted (or record file crashed)
     MySQL error code 135 = No more room in record file
     MySQL error code 136 = No more room in index file
     MySQL error code 141 = Duplicate unique key or constraint on write or update
     MySQL error code 144 = Table is crashed and last repair failed
     MySQL error code 145 = Table was marked as crashed and should be repaired

Note that error 135 (no more room in record file) and error 136 (no
more room in index file) are not errors that can be fixed by a simple
repair. In this case, you must use *Note `ALTER TABLE': alter-table. to
increase the `MAX_ROWS' and `AVG_ROW_LENGTH' table option values:

     ALTER TABLE TBL_NAME MAX_ROWS=XXX AVG_ROW_LENGTH=YYY;

If you do not know the current table option values, use *Note `SHOW
CREATE TABLE': show-create-table.

For the other errors, you must repair your tables.  *Note `myisamchk':
myisamchk. can usually detect and fix most problems that occur.

The repair process involves up to four stages, described here.  Before
you begin, you should change location to the database directory and
check the permissions of the table files. On Unix, make sure that they
are readable by the user that *Note `mysqld': mysqld. runs as (and to
you, because you need to access the files you are checking). If it
turns out you need to modify files, they must also be writable by you.

This section is for the cases where a table check fails (such as those
described in *Note myisam-check::), or you want to use the extended
features that *Note `myisamchk': myisamchk.  provides.

The *Note `myisamchk': myisamchk. options used for table maintenance
with are described in *Note myisamchk::.  *Note `myisamchk': myisamchk.
also has variables that you can set to control memory allocation that
may improve performance. See *Note myisamchk-memory::.

If you are going to repair a table from the command line, you must
first stop the *Note `mysqld': mysqld. server. Note that when you do
*Note `mysqladmin shutdown': mysqladmin. on a remote server, the *Note
`mysqld': mysqld. server is still available for a while after *Note
`mysqladmin': mysqladmin. returns, until all statement-processing has
stopped and all index changes have been flushed to disk.

*Stage 1: Checking your tables*

Run *Note `myisamchk *.MYI': myisamchk. or *Note `myisamchk -e *.MYI':
myisamchk. if you have more time. Use the `-s' (silent) option to
suppress unnecessary information.

If the *Note `mysqld': mysqld. server is stopped, you should use the
`--update-state' option to tell *Note `myisamchk': myisamchk. to mark
the table as `checked.'

You have to repair only those tables for which *Note `myisamchk':
myisamchk. announces an error. For such tables, proceed to Stage 2.

If you get unexpected errors when checking (such as `out of memory'
errors), or if *Note `myisamchk': myisamchk.  crashes, go to Stage 3.

*Stage 2: Easy safe repair*

First, try *Note `myisamchk -r -q TBL_NAME': myisamchk. (`-r -q' means
`quick recovery mode'). This attempts to repair the index file without
touching the data file. If the data file contains everything that it
should and the delete links point at the correct locations within the
data file, this should work, and the table is fixed. Start repairing
the next table. Otherwise, use the following procedure:

  1. Make a backup of the data file before continuing.

  2. Use *Note `myisamchk -r TBL_NAME': myisamchk.  (`-r' means
     `recovery mode').  This removes incorrect rows and deleted rows
     from the data file and reconstructs the index file.

  3. If the preceding step fails, use *Note `myisamchk --safe-recover
     TBL_NAME': myisamchk. Safe recovery mode uses an old recovery
     method that handles a few cases that regular recovery mode does
     not (but is slower).

*Note*:

If you want a repair operation to go much faster, you should set the
values of the `sort_buffer_size' and `key_buffer_size' variables each
to about 25% of your available memory when running *Note `myisamchk':
myisamchk.

If you get unexpected errors when repairing (such as `out of memory'
errors), or if *Note `myisamchk': myisamchk. crashes, go to Stage 3.

*Stage 3: Difficult repair*

You should reach this stage only if the first 16KB block in the index
file is destroyed or contains incorrect information, or if the index
file is missing. In this case, it is necessary to create a new index
file. Do so as follows:

  1. Move the data file to a safe place.

  2. Use the table description file to create new (empty) data and
     index files:

          shell> mysql DB_NAME
          mysql> SET autocommit=1;
          mysql> TRUNCATE TABLE TBL_NAME;
          mysql> quit

  3. Copy the old data file back onto the newly created data file. (Do
     not just move the old file back onto the new file.  You want to
     retain a copy in case something goes wrong.)

*Important*:

If you are using replication, you should stop it prior to performing
the above procedure, since it involves file system operations, and
these are not logged by MySQL.

Go back to Stage 2. *Note `myisamchk -r -q': myisamchk. should work.
(This should not be an endless loop.)

You can also use the `REPAIR TABLE TBL_NAME USE_FRM' SQL statement,
which performs the whole procedure automatically.  There is also no
possibility of unwanted interaction between a utility and the server,
because the server does all the work when you use *Note `REPAIR TABLE':
repair-table. See *Note repair-table::.

*Stage 4: Very difficult repair*

You should reach this stage only if the `.frm' description file has
also crashed.  That should never happen, because the description file
is not changed after the table is created:

  1. Restore the description file from a backup and go back to Stage 3.
     You can also restore the index file and go back to Stage 2. In the
     latter case, you should start with *Note `myisamchk -r': myisamchk.

  2. If you do not have a backup but know exactly how the table was
     created, create a copy of the table in another database.  Remove
     the new data file, and then move the `.frm' description and `.MYI'
     index files from the other database to your crashed database. This
     gives you new description and index files, but leaves the `.MYD'
     data file alone. Go back to Stage 2 and attempt to reconstruct the
     index file.


File: manual.info,  Node: myisam-optimization,  Next: myisam-maintenance-schedule,  Prev: myisam-repair,  Up: myisam-table-maintenance

7.6.4 `MyISAM' Table Optimization
---------------------------------

To coalesce fragmented rows and eliminate wasted space that results
from deleting or updating rows, run *Note `myisamchk': myisamchk. in
recovery mode:

     shell> myisamchk -r TBL_NAME

You can optimize a table in the same way by using the *Note `OPTIMIZE
TABLE': optimize-table. SQL statement.  *Note `OPTIMIZE TABLE':
optimize-table. does a table repair and a key analysis, and also sorts
the index tree so that key lookups are faster. There is also no
possibility of unwanted interaction between a utility and the server,
because the server does all the work when you use *Note `OPTIMIZE
TABLE': optimize-table. See *Note optimize-table::.

*Note `myisamchk': myisamchk. has a number of other options that you
can use to improve the performance of a table:

   * `--analyze' or `-a': Perform key distribution analysis. This
     improves join performance by enabling the join optimizer to better
     choose the order in which to join the tables and which indexes it
     should use.

   * `--sort-index' or `-S': Sort the index blocks. This optimizes
     seeks and makes table scans that use indexes faster.

   * `--sort-records=INDEX_NUM' or `-R INDEX_NUM': Sort data rows
     according to a given index. This makes your data much more
     localized and may speed up range-based *Note `SELECT': select. and
     `ORDER BY' operations that use this index.

For a full description of all available options, see *Note myisamchk::.


File: manual.info,  Node: myisam-maintenance-schedule,  Prev: myisam-optimization,  Up: myisam-table-maintenance

7.6.5 Setting Up a `MyISAM' Table Maintenance Schedule
------------------------------------------------------

It is a good idea to perform table checks on a regular basis rather
than waiting for problems to occur. One way to check and repair
`MyISAM' tables is with the *Note `CHECK TABLE': check-table. and *Note
`REPAIR TABLE': repair-table. statements. See *Note
table-maintenance-sql::.

Another way to check tables is to use *Note `myisamchk': myisamchk. For
maintenance purposes, you can use *Note `myisamchk -s': myisamchk. The
`-s' option (short for `--silent') causes *Note `myisamchk': myisamchk.
to run in silent mode, printing messages only when errors occur.

It is also a good idea to enable automatic `MyISAM' table checking. For
example, whenever the machine has done a restart in the middle of an
update, you usually need to check each table that could have been
affected before it is used further. (These are `expected crashed
tables.') To cause the server to check `MyISAM' tables automatically,
start it with the `--myisam-recover-options' option. See *Note
server-options::.

You should also check your tables regularly during normal system
operation. For example, you can run a `cron' job to check important
tables once a week, using a line like this in a `crontab' file:

     35 0 * * 0 /PATH/TO/MYISAMCHK --fast --silent /PATH/TO/DATADIR/*/*.MYI

This prints out information about crashed tables so that you can
examine and repair them as necessary.

To start with, execute *Note `myisamchk -s': myisamchk. each night on
all tables that have been updated during the last 24 hours. As you see
that problems occur infrequently, you can back off the checking
frequency to once a week or so.

Normally, MySQL tables need little maintenance. If you are performing
many updates to `MyISAM' tables with dynamic-sized rows (tables with
*Note `VARCHAR': char, *Note `BLOB': blob, or *Note `TEXT': blob.
columns) or have tables with many deleted rows you may want to
defragment/reclaim space from the tables from time to time. You can do
this by using *Note `OPTIMIZE TABLE': optimize-table. on the tables in
question. Alternatively, if you can stop the *Note `mysqld': mysqld.
server for a while, change location into the data directory and use
this command while the server is stopped:

     shell> myisamchk -r -s --sort-index --myisam_sort_buffer_size=16M */*.MYI


File: manual.info,  Node: optimization,  Next: language-structure,  Prev: backup-and-recovery,  Up: Top

8 Optimization
**************

* Menu:

* optimize-overview::            Optimization Overview
* statement-optimization::       Optimizing SQL Statements
* optimization-indexes::         Optimization and Indexes
* optimizing-database-structure::  Optimizing Database Structure
* optimizing-innodb::            Optimizing for `InnoDB' Tables
* optimizing-myisam::            Optimizing for `MyISAM' Tables
* optimizing-memory-tables::     Optimizing for `MEMORY' Tables
* execution-plan-information::   Understanding the Query Execution Plan
* buffering-caching::            Buffering and Caching
* locking-issues::               Optimizing Locking Operations
* optimizing-the-server::        Optimizing the MySQL Server
* optimize-benchmarking::        Measuring Performance (Benchmarking)

This chapter explains how to optimize MySQL performance and provides
examples. Optimization involves configuring, tuning, and measuring
performance, at several levels. Depending on your job role (developer,
DBA, or a combination of both), you might optimize at the level of
individual SQL statements, entire applications, a single database
server, or multiple networked database servers.  Sometimes you can be
proactive and plan in advance for performance, while other times you
might troubleshoot a configuration or code issue after a problem
occurs. Optimizing CPU and memory usage can also improve scalability,
allowing the database to handle more load without slowing down.


File: manual.info,  Node: optimize-overview,  Next: statement-optimization,  Prev: optimization,  Up: optimization

8.1 Optimization Overview
=========================

Database performance depends on several factors at the database level,
such as tables, queries, and configuration settings. These software
constructs result in CPU and I/O operations at the hardware level,
which you must minimize and make as efficient as possible. As you work
on database performance, you start by learning the high-level rules and
guidelines for the software side, and measuring performance using
wall-clock time. As you become an expert, you learn more about what
happens internally, and start measuring things such as CPU cycles and
I/O operations.

Typical users aim to get the best database performance out of their
existing software and hardware configurations. Advanced users look for
opportunities to improve the MySQL software itself, or develop their
own storage engines and hardware appliances to expand the MySQL
ecosystem.

* Optimizing at the Database Level *

The most important factor in making a database application fast is its
basic design:

   * Are the tables structured properly? In particular, do the columns
     have the right data types, and does each table have the
     appropriate columns for the type of work? For example,
     applications that perform frequent updates often have many tables
     with few columns, while applications that analyze large amounts of
     data often have few tables with many columns.

   * Are the right *Note indexes: optimization-indexes. in place to
     make queries efficient?

   * Are you using the appropriate storage engine for each table, and
     taking advantage of the strengths and features of each storage
     engine you use? In particular, the choice of a transactional
     storage engine such as `*Note InnoDB: optimizing-innodb.' or a
     nontransactional one such as `*Note MyISAM: optimizing-myisam.'
     can be very important for performance and scalability.

     *Note*:

     In MySQL 5.5 and higher, `InnoDB' is the default storage engine
     for new tables. In practice, the advanced `InnoDB' performance
     features mean that `InnoDB' tables often outperform the simpler
     `MyISAM' tables, especially for a busy database.

   * Does each table use an appropriate row format? This choice also
     depends on the storage engine used for the table. In particular,
     compressed tables use less disk space and so require less disk I/O
     to read and write the data. Compression is available for all kinds
     of workloads with `InnoDB' tables, and for read-only `MyISAM'
     tables.

   * Does the application use an appropriate *Note locking strategy:
     locking-issues.? For example, by allowing shared access when
     possible so that database operations can run concurrently, and
     requesting exclusive access when appropriate so that critical
     operations get top priority. Again, the choice of storage engine is
     significant. The `InnoDB' storage engine handles most locking
     issues without involvement from you, allowing for better
     concurrency in the database and reducing the amount of
     experimentation and tuning for your code.

   * Are all *Note memory areas used for caching: buffering-caching.
     sized correctly? That is, large enough to hold frequently accessed
     data, but not so large that they overload physical memory and
     cause paging. The main memory areas to configure are the `InnoDB'
     buffer pool, the `MyISAM' key cache, and the MySQL query cache.

* Optimizing at the Hardware Level *

Any database application eventually hits hardware limits as the
database becomes more and more busy. A DBA must evaluate whether it is
possible to tune the application or reconfigure the server to avoid
these bottlenecks, or whether more hardware resources are required.
System bottlenecks typically arise from these sources:

   * Disk seeks. It takes time for the disk to find a piece of data.
     With modern disks, the mean time for this is usually lower than
     10ms, so we can in theory do about 100 seeks a second. This time
     improves slowly with new disks and is very hard to optimize for a
     single table. The way to optimize seek time is to distribute the
     data onto more than one disk.

   * Disk reading and writing. When the disk is at the correct
     position, we need to read or write the data. With modern disks,
     one disk delivers at least 10-20MB/s throughput.  This is easier
     to optimize than seeks because you can read in parallel from
     multiple disks.

   * CPU cycles. When the data is in main memory, we must process it to
     get our result. Having small tables compared to the amount of
     memory is the most common limiting factor. But with small tables,
     speed is usually not the problem.

   * Memory bandwidth. When the CPU needs more data than can fit in the
     CPU cache, main memory bandwidth becomes a bottleneck.  This is an
     uncommon bottleneck for most systems, but one to be aware of.

* Balancing Portability and Performance *

To use performance-oriented SQL extensions in a portable MySQL program,
you can wrap MySQL-specific keywords in a statement within `/*! */'
comment delimiters. Other SQL servers ignore the commented keywords.
For information about writing comments, see *Note comments::.


File: manual.info,  Node: statement-optimization,  Next: optimization-indexes,  Prev: optimize-overview,  Up: optimization

8.2 Optimizing SQL Statements
=============================

* Menu:

* select-optimization::          Optimizing `SELECT' Statements
* non-select-optimization::      Optimizing DML Statements
* permission-optimization::      Optimizing Database Privileges
* information-schema-optimization::  Optimizing `INFORMATION_SCHEMA' Queries
* miscellaneous-optimization-tips::  Other Optimization Tips

The core logic of a database application is performed through SQL
statements, whether issued directly through an interpreter or submitted
behind the scenes through an API. The tuning guidelines in this section
help to speed up all kinds of MySQL applications.  The guidelines cover
SQL operations that read and write data, the behind-the-scenes overhead
for SQL operations in general, and operations used in specific
scenarios such as database monitoring.


File: manual.info,  Node: select-optimization,  Next: non-select-optimization,  Prev: statement-optimization,  Up: statement-optimization

8.2.1 Optimizing `SELECT' Statements
------------------------------------

* Menu:

* select-speed::                 Speed of `SELECT' Statements
* where-optimizations::          How MySQL Optimizes `WHERE' Clauses
* range-optimization::           Range Optimization
* index-merge-optimization::     Index Merge Optimization
* condition-pushdown-optimization::  Engine Condition Pushdown Optimization
* is-null-optimization::         `IS NULL' Optimization
* left-join-optimization::       `LEFT JOIN' and `RIGHT JOIN' Optimization
* nested-loop-joins::            Nested-Loop Join Algorithms
* nested-join-optimization::     Nested Join Optimization
* outer-join-simplification::    Outer Join Simplification
* order-by-optimization::        `ORDER BY' Optimization
* group-by-optimization::        `GROUP BY' Optimization
* distinct-optimization::        `DISTINCT' Optimization
* subquery-optimization-with-exists::  Optimizing Subqueries with `EXISTS' Strategy
* limit-optimization::           Optimizing `LIMIT' Queries
* how-to-avoid-table-scan::      How to Avoid Full Table Scans

Queries, in the form of *Note `SELECT': select.  statements, perform
all the lookup operations in the database.  Tuning these statements is
a top priority, whether to achieve sub-second response times for
dynamic web pages, or to chop hours off the time to generate huge
overnight reports.

Besides `SELECT' statements, the tuning techniques for queries also
apply to constructs such as `CREATE TABLE...AS SELECT', `INSERT
INTO...SELECT', and `WHERE' clauses in *Note `DELETE': delete.
statements. Those statements have additional performance considerations
because they combine write operations with the read-oriented query
operations.

The main considerations for optimizing queries are:

   * Set up indexes on columns used in the `WHERE' clause, to speed up
     evaluation, filtering, and the final retrieval of results. To avoid
     wasted disk space, construct a small set of indexes that speed up
     many related queries used in your application.

   * Minimize the number of table scans in your queries, particularly
     for big tables.

   * Keep table statistics up to date, so the optimizer has the
     information needed to construct an efficient execution plan.

   * Learn the tuning techniques, indexing techniques, and
     configuration parameters that are specific to the storage engine
     for each table. Both *Note `InnoDB': innodb-storage-engine. and
     *Note `MyISAM': myisam-storage-engine. have sets of guidelines for
     enabling and sustaining high performance in queries.

   * Isolate and tune any part of the query, such as a function call,
     that takes excessive time. Remember that such a function might get
     called millions of times for a big query or insert operation.

   * Avoid transforming the query in ways that make it hard to
     understand, especially if the optimizer does some of the same
     transformations automatically.

   * If a performance issue is not easily solved by one of the basic
     guidelines, investigate the internal details of the specific query
     by reading the *Note `EXPLAIN': explain. plan and adjusting your
     indexes, `WHERE' clauses, join clauses, and so on. (When you reach
     a certain level of expertise, reading the *Note `EXPLAIN':
     explain. plan might be your first step for every query.)

   * Adjust the size and properties of the memory areas that MySQL uses
     for caching. With efficient use of the `InnoDB' buffer pool,
     `MyISAM' key cache, and the MySQL query cache, repeated queries
     run faster because the results are retrieved from memory the
     second and subsequent times.

   * Even for a query that runs fast using the cache memory areas, you
     might still optimize further so that they require less cache
     memory, making your application more scalable.  Scalability means
     that your application can handle more simultaneous users, larger
     requests, and so on without experiencing a big drop in performance.

   * Deal with locking issues, where the speed of your query might be
     affected by other sessions accessing the tables at the same time.


File: manual.info,  Node: select-speed,  Next: where-optimizations,  Prev: select-optimization,  Up: select-optimization

8.2.1.1 Speed of `SELECT' Statements
....................................

In general, when you want to make a slow `SELECT ...  WHERE' query
faster, the first thing to check is whether you can add an index.
Indexes are especially important for queries that reference different
tables, using features such as joins and foreign keys. You can use the
*Note `EXPLAIN': explain. statement to determine which indexes are used
for a *Note `SELECT': select. See *Note using-explain::, and *Note
mysql-indexes::.


File: manual.info,  Node: where-optimizations,  Next: range-optimization,  Prev: select-speed,  Up: select-optimization

8.2.1.2 How MySQL Optimizes `WHERE' Clauses
...........................................

This section discusses optimizations that can be made for processing
`WHERE' clauses. The examples use *Note `SELECT': select. statements,
but the same optimizations apply for `WHERE' clauses in *Note `DELETE':
delete. and *Note `UPDATE': update. statements.

Some examples of queries that are very fast:

     SELECT COUNT(*) FROM TBL_NAME;

     SELECT MIN(KEY_PART1),MAX(KEY_PART1) FROM TBL_NAME;

     SELECT MAX(KEY_PART2) FROM TBL_NAME
       WHERE KEY_PART1=CONSTANT;

     SELECT ... FROM TBL_NAME
       ORDER BY KEY_PART1,KEY_PART2,... LIMIT 10;

     SELECT ... FROM TBL_NAME
       ORDER BY KEY_PART1 DESC, KEY_PART2 DESC, ... LIMIT 10;

MySQL resolves the following queries using only the entries from a
secondary index, if the indexed columns are numeric:

     SELECT KEY_PART1,KEY_PART2 FROM TBL_NAME WHERE KEY_PART1=VAL;

     SELECT COUNT(*) FROM TBL_NAME
       WHERE KEY_PART1=VAL1 AND KEY_PART2=VAL2;

     SELECT KEY_PART2 FROM TBL_NAME GROUP BY KEY_PART1;

The following queries use the index data to retrieve the rows in sorted
order without a separate sorting pass:

     SELECT ... FROM TBL_NAME
       ORDER BY KEY_PART1,KEY_PART2,... ;

     SELECT ... FROM TBL_NAME
       ORDER BY KEY_PART1 DESC, KEY_PART2 DESC, ... ;

You might be tempted to rewrite your queries to make arithmetic
operations faster, while sacrificing readability.  Because MySQL does
similar optimizations automatically, you can often avoid this work, and
leave the query in a more understandable and maintainable form. Some of
the optimizations performed by MySQL follow:

*Note*:

Because work on the MySQL optimizer is ongoing, not all of the
optimizations that MySQL performs are documented here.

   * Removal of unnecessary parentheses:

             ((a AND b) AND c OR (((a AND b) AND (c AND d))))
          -> (a AND b AND c) OR (a AND b AND c AND d)

   * Constant folding:

             (a<b AND b=c) AND a=5
          -> b>5 AND b=c AND a=5

   * Constant condition removal (needed because of constant folding):

             (B>=5 AND B=5) OR (B=6 AND 5=5) OR (B=7 AND 5=6)
          -> B=5 OR B=6

   * Constant expressions used by indexes are evaluated only once.

   * `COUNT(*)' on a single table without a `WHERE' is retrieved
     directly from the table information for `MyISAM' and `MEMORY'
     tables. This is also done for any `NOT NULL' expression when used
     with only one table.

   * Early detection of invalid constant expressions. MySQL quickly
     detects that some *Note `SELECT': select. statements are
     impossible and returns no rows.

   * `HAVING' is merged with `WHERE' if you do not use `GROUP BY' or
     aggregate functions (`COUNT()', `MIN()', and so on).

   * For each table in a join, a simpler `WHERE' is constructed to get
     a fast `WHERE' evaluation for the table and also to skip rows as
     soon as possible.

   * All constant tables are read first before any other tables in the
     query. A constant table is any of the following:

        * An empty table or a table with one row.

        * A table that is used with a `WHERE' clause on a `PRIMARY KEY'
          or a `UNIQUE' index, where all index parts are compared to
          constant expressions and are defined as `NOT NULL'.

     All of the following tables are used as constant tables:

          SELECT * FROM t WHERE PRIMARY_KEY=1;
          SELECT * FROM t1,t2
            WHERE t1.PRIMARY_KEY=1 AND t2.PRIMARY_KEY=t1.id;

   * The best join combination for joining the tables is found by
     trying all possibilities. If all columns in `ORDER BY' and `GROUP
     BY' clauses come from the same table, that table is preferred
     first when joining.

   * If there is an `ORDER BY' clause and a different `GROUP BY'
     clause, or if the `ORDER BY' or `GROUP BY' contains columns from
     tables other than the first table in the join queue, a temporary
     table is created.

   * If you use the `SQL_SMALL_RESULT' option, MySQL uses an in-memory
     temporary table.

   * Each table index is queried, and the best index is used unless the
     optimizer believes that it is more efficient to use a table scan.
     At one time, a scan was used based on whether the best index
     spanned more than 30% of the table, but a fixed percentage no
     longer determines the choice between using an index or a scan. The
     optimizer now is more complex and bases its estimate on additional
     factors such as table size, number of rows, and I/O block size.

   * MySQL can sometimes produce query results using data from the
     index, without consulting the table data. If all columns used from
     the index are numeric, only the index data is used to resolve the
     query.

   * Before each row is output, those that do not match the `HAVING'
     clause are skipped.


File: manual.info,  Node: range-optimization,  Next: index-merge-optimization,  Prev: where-optimizations,  Up: select-optimization

8.2.1.3 Range Optimization
..........................

* Menu:

* range-access-single-part::     The Range Access Method for Single-Part Indexes
* range-access-multi-part::      The Range Access Method for Multiple-Part Indexes

The `range' access method uses a single index to retrieve a subset of
table rows that are contained within one or several index value
intervals. It can be used for a single-part or multiple-part index. The
following sections give a detailed description of how intervals are
extracted from the `WHERE' clause.


File: manual.info,  Node: range-access-single-part,  Next: range-access-multi-part,  Prev: range-optimization,  Up: range-optimization

8.2.1.4 The Range Access Method for Single-Part Indexes
.......................................................

For a single-part index, index value intervals can be conveniently
represented by corresponding conditions in the `WHERE' clause, so we
speak of _range conditions_ rather than `intervals.'

The definition of a range condition for a single-part index is as
follows:

   * For both `BTREE' and `HASH' indexes, comparison of a key part with
     a constant value is a range condition when using the `=', `<=>',
     `IN()', `IS NULL', or `IS NOT NULL' operators.

   * Additionally, for `BTREE' indexes, comparison of a key part with a
     constant value is a range condition when using the `>', `<', `>=',
     `<=', `BETWEEN', `!=', or `<>' operators, or `LIKE' comparisons if
     the argument to `LIKE' is a constant string that does not start
     with a wildcard character.

   * For all types of indexes, multiple range conditions combined with
     `OR' or `AND' form a range condition.

`Constant value' in the preceding descriptions means one of the
following:

   * A constant from the query string

   * A column of a `const' or `system' table from the same join

   * The result of an uncorrelated subquery

   * Any expression composed entirely from subexpressions of the
     preceding types

Here are some examples of queries with range conditions in the `WHERE'
clause:

     SELECT * FROM t1
       WHERE KEY_COL > 1
       AND KEY_COL < 10;

     SELECT * FROM t1
       WHERE KEY_COL = 1
       OR KEY_COL IN (15,18,20);

     SELECT * FROM t1
       WHERE KEY_COL LIKE 'ab%'
       OR KEY_COL BETWEEN 'bar' AND 'foo';

Note that some nonconstant values may be converted to constants during
the constant propagation phase.

MySQL tries to extract range conditions from the `WHERE' clause for
each of the possible indexes. During the extraction process, conditions
that cannot be used for constructing the range condition are dropped,
conditions that produce overlapping ranges are combined, and conditions
that produce empty ranges are removed.

Consider the following statement, where `key1' is an indexed column and
`nonkey' is not indexed:

     SELECT * FROM t1 WHERE
       (key1 < 'abc' AND (key1 LIKE 'abcde%' OR key1 LIKE '%b')) OR
       (key1 < 'bar' AND nonkey = 4) OR
       (key1 < 'uux' AND key1 > 'z');

The extraction process for key `key1' is as follows:

  1. Start with original `WHERE' clause:

          (key1 < 'abc' AND (key1 LIKE 'abcde%' OR key1 LIKE '%b')) OR
          (key1 < 'bar' AND nonkey = 4) OR
          (key1 < 'uux' AND key1 > 'z')

  2. Remove `nonkey = 4' and `key1 LIKE '%b'' because they cannot be
     used for a range scan. The correct way to remove them is to replace
     them with `TRUE', so that we do not miss any matching rows when
     doing the range scan. Having replaced them with `TRUE', we get:

          (key1 < 'abc' AND (key1 LIKE 'abcde%' OR TRUE)) OR
          (key1 < 'bar' AND TRUE) OR
          (key1 < 'uux' AND key1 > 'z')

  3. Collapse conditions that are always true or false:

        * `(key1 LIKE 'abcde%' OR TRUE)' is always true

        * `(key1 < 'uux' AND key1 > 'z')' is always false

     Replacing these conditions with constants, we get:

          (key1 < 'abc' AND TRUE) OR (key1 < 'bar' AND TRUE) OR (FALSE)

     Removing unnecessary `TRUE' and `FALSE' constants, we obtain:

          (key1 < 'abc') OR (key1 < 'bar')

  4. Combining overlapping intervals into one yields the final
     condition to be used for the range scan:

          (key1 < 'bar')

In general (and as demonstrated by the preceding example), the
condition used for a range scan is less restrictive than the `WHERE'
clause. MySQL performs an additional check to filter out rows that
satisfy the range condition but not the full `WHERE' clause.

The range condition extraction algorithm can handle nested `AND'/`OR'
constructs of arbitrary depth, and its output does not depend on the
order in which conditions appear in `WHERE' clause.

Currently, MySQL does not support merging multiple ranges for the
`range' access method for spatial indexes. To work around this
limitation, you can use a *Note `UNION': union. with identical *Note
`SELECT': select. statements, except that you put each spatial
predicate in a different *Note `SELECT': select.


File: manual.info,  Node: range-access-multi-part,  Prev: range-access-single-part,  Up: range-optimization

8.2.1.5 The Range Access Method for Multiple-Part Indexes
.........................................................

Range conditions on a multiple-part index are an extension of range
conditions for a single-part index. A range condition on a
multiple-part index restricts index rows to lie within one or several
key tuple intervals. Key tuple intervals are defined over a set of key
tuples, using ordering from the index.

For example, consider a multiple-part index defined as `key1(KEY_PART1,
KEY_PART2, KEY_PART3)', and the following set of key tuples listed in
key order:

     KEY_PART1  KEY_PART2  KEY_PART3
       NULL       1          'abc'
       NULL       1          'xyz'
       NULL       2          'foo'
        1         1          'abc'
        1         1          'xyz'
        1         2          'abc'
        2         1          'aaa'

The condition `KEY_PART1 = 1' defines this interval:

     (1,-inf,-inf) <= (KEY_PART1,KEY_PART2,KEY_PART3) < (1,+inf,+inf)

The interval covers the 4th, 5th, and 6th tuples in the preceding data
set and can be used by the range access method.

By contrast, the condition `KEY_PART3 = 'abc'' does not define a single
interval and cannot be used by the range access method.

The following descriptions indicate how range conditions work for
multiple-part indexes in greater detail.

   * For `HASH' indexes, each interval containing identical values can
     be used. This means that the interval can be produced only for
     conditions in the following form:

              KEY_PART1 CMP CONST1
          AND KEY_PART2 CMP CONST2
          AND ...
          AND KEY_PARTN CMP CONSTN;

     Here, CONST1, CONST2, ... are constants, CMP is one of the `=',
     `<=>', or `IS NULL' comparison operators, and the conditions cover
     all index parts.  (That is, there are N conditions, one for each
     part of an N-part index.) For example, the following is a range
     condition for a three-part `HASH' index:

          KEY_PART1 = 1 AND KEY_PART2 IS NULL AND KEY_PART3 = 'foo'

     For the definition of what is considered to be a constant, see
     *Note range-access-single-part::.

   * For a `BTREE' index, an interval might be usable for conditions
     combined with `AND', where each condition compares a key part with
     a constant value using `=', `<=>', `IS NULL', `>', `<', `>=', `<=',
     `!=', `<>', `BETWEEN', or `LIKE 'PATTERN'' (where `'PATTERN'' does
     not start with a wildcard). An interval can be used as long as it
     is possible to determine a single key tuple containing all rows
     that match the condition (or two intervals if `<>' or `!=' is
     used).

     The optimizer attempts to use additional key parts to determine
     the interval as long as the comparison operator is `=', `<=>', or
     `IS NULL'. If the operator is `>', `<', `>=', `<=', `!=', `<>',
     `BETWEEN', or `LIKE', the optimizer uses it but considers no more
     key parts. For the following expression, the optimizer uses `='
     from the first comparison. It also uses `>=' from the second
     comparison but considers no further key parts and does not use the
     third comparison for interval construction:

          KEY_PART1 = 'foo' AND KEY_PART2 >= 10 AND KEY_PART3 > 10

     The single interval is:

          ('foo',10,-inf) < (KEY_PART1,KEY_PART2,KEY_PART3) < ('foo',+inf,+inf)

     It is possible that the created interval contains more rows than
     the initial condition. For example, the preceding interval
     includes the value `('foo', 11, 0)', which does not satisfy the
     original condition.

   * If conditions that cover sets of rows contained within intervals
     are combined with `OR', they form a condition that covers a set of
     rows contained within the union of their intervals. If the
     conditions are combined with `AND', they form a condition that
     covers a set of rows contained within the intersection of their
     intervals. For example, for this condition on a two-part index:

          (KEY_PART1 = 1 AND KEY_PART2 < 2) OR (KEY_PART1 > 5)

     The intervals are:

          (1,-inf) < (KEY_PART1,KEY_PART2) < (1,2)
          (5,-inf) < (KEY_PART1,KEY_PART2)

     In this example, the interval on the first line uses one key part
     for the left bound and two key parts for the right bound. The
     interval on the second line uses only one key part. The `key_len'
     column in the *Note `EXPLAIN': explain. output indicates the
     maximum length of the key prefix used.

     In some cases, `key_len' may indicate that a key part was used,
     but that might be not what you would expect. Suppose that
     KEY_PART1 and KEY_PART2 can be `NULL'. Then the `key_len' column
     displays two key part lengths for the following condition:

          KEY_PART1 >= 1 AND KEY_PART2 < 2

     But, in fact, the condition is converted to this:

          KEY_PART1 >= 1 AND KEY_PART2 IS NOT NULL

*Note range-access-single-part::, describes how optimizations are
performed to combine or eliminate intervals for range conditions on a
single-part index.  Analogous steps are performed for range conditions
on multiple-part indexes.


File: manual.info,  Node: index-merge-optimization,  Next: condition-pushdown-optimization,  Prev: range-optimization,  Up: select-optimization

8.2.1.6 Index Merge Optimization
................................

* Menu:

* index-merge-intersection::     The Index Merge Intersection Access Algorithm
* index-merge-union::            The Index Merge Union Access Algorithm
* index-merge-sort-union::       The Index Merge Sort-Union Access Algorithm

The _Index Merge_ method is used to retrieve rows with several `range'
scans and to merge their results into one. The merge can produce unions,
intersections, or unions-of-intersections of its underlying scans. This
access method merges index scans from a single table; it does not merge
scans across multiple tables.

In *Note `EXPLAIN': explain. output, the Index Merge method appears as
`index_merge' in the `type' column. In this case, the `key' column
contains a list of indexes used, and `key_len' contains a list of the
longest key parts for those indexes.

Examples:

     SELECT * FROM TBL_NAME WHERE KEY1 = 10 OR KEY2 = 20;

     SELECT * FROM TBL_NAME
       WHERE (KEY1 = 10 OR KEY2 = 20) AND NON_KEY=30;

     SELECT * FROM t1, t2
       WHERE (t1.KEY1 IN (1,2) OR t1.KEY2 LIKE 'VALUE%')
       AND t2.KEY1=t1.SOME_COL;

     SELECT * FROM t1, t2
       WHERE t1.KEY1=1
       AND (t2.KEY1=t1.SOME_COL OR t2.KEY2=t1.SOME_COL2);

The Index Merge method has several access algorithms (seen in the
`Extra' field of *Note `EXPLAIN': explain. output):

   * `Using intersect(...)'

   * `Using union(...)'

   * `Using sort_union(...)'

The following sections describe these methods in greater detail.

*Note*:

The Index Merge optimization algorithm has the following known
deficiencies:

   * If your query has a complex `WHERE' clause with deep `AND'/`OR'
     nesting and MySQL doesn't choose the optimal plan, try
     distributing terms using the following identity laws:

          (X AND Y) OR Z = (X OR Z) AND (Y OR Z)
          (X OR Y) AND Z = (X AND Z) OR (Y AND Z)

   * Index Merge is not applicable to full-text indexes. We plan to
     extend it to cover these in a future MySQL release.

   * If a range scan is possible on some key, the optimizer will not
     consider using Index Merge Union or Index Merge Sort-Union
     algorithms. For example, consider this query:

          SELECT * FROM t1 WHERE (goodkey1 < 10 OR goodkey2 < 20) AND badkey < 30;

     For this query, two plans are possible:

        * An Index Merge scan using the `(goodkey1 < 10 OR goodkey2 <
          20)' condition.

        * A range scan using the `badkey < 30' condition.

     However, the optimizer considers only the second plan.

The choice between different possible variants of the Index Merge
access method and other access methods is based on cost estimates of
various available options.


File: manual.info,  Node: index-merge-intersection,  Next: index-merge-union,  Prev: index-merge-optimization,  Up: index-merge-optimization

8.2.1.7 The Index Merge Intersection Access Algorithm
.....................................................

This access algorithm can be employed when a `WHERE' clause was
converted to several range conditions on different keys combined with
`AND', and each condition is one of the following:

   * In this form, where the index has exactly N parts (that is, all
     index parts are covered):

          KEY_PART1=CONST1 AND KEY_PART2=CONST2 ... AND KEY_PARTN=CONSTN

   * Any range condition over a primary key of an `InnoDB' table.

Examples:

     SELECT * FROM INNODB_TABLE WHERE PRIMARY_KEY < 10 AND KEY_COL1=20;

     SELECT * FROM TBL_NAME
       WHERE (KEY1_PART1=1 AND KEY1_PART2=2) AND KEY2=2;

The Index Merge intersection algorithm performs simultaneous scans on
all used indexes and produces the intersection of row sequences that it
receives from the merged index scans.

If all columns used in the query are covered by the used indexes, full
table rows are not retrieved (*Note `EXPLAIN': explain. output contains
`Using index' in `Extra' field in this case). Here is an example of
such a query:

     SELECT COUNT(*) FROM t1 WHERE key1=1 AND key2=1;

If the used indexes don't cover all columns used in the query, full
rows are retrieved only when the range conditions for all used keys are
satisfied.

If one of the merged conditions is a condition over a primary key of an
`InnoDB' table, it is not used for row retrieval, but is used to filter
out rows retrieved using other conditions.


File: manual.info,  Node: index-merge-union,  Next: index-merge-sort-union,  Prev: index-merge-intersection,  Up: index-merge-optimization

8.2.1.8 The Index Merge Union Access Algorithm
..............................................

The applicability criteria for this algorithm are similar to those for
the Index Merge method intersection algorithm. The algorithm can be
employed when the table's `WHERE' clause was converted to several range
conditions on different keys combined with `OR', and each condition is
one of the following:

   * In this form, where the index has exactly N parts (that is, all
     index parts are covered):

          KEY_PART1=CONST1 AND KEY_PART2=CONST2 ... AND KEY_PARTN=CONSTN

   * Any range condition over a primary key of an `InnoDB' table.

   * A condition for which the Index Merge method intersection
     algorithm is applicable.

Examples:

     SELECT * FROM t1 WHERE KEY1=1 OR KEY2=2 OR KEY3=3;

     SELECT * FROM INNODB_TABLE WHERE (KEY1=1 AND KEY2=2) OR
       (KEY3='foo' AND KEY4='bar') AND KEY5=5;


File: manual.info,  Node: index-merge-sort-union,  Prev: index-merge-union,  Up: index-merge-optimization

8.2.1.9 The Index Merge Sort-Union Access Algorithm
...................................................

This access algorithm is employed when the `WHERE' clause was converted
to several range conditions combined by `OR', but for which the Index
Merge method union algorithm is not applicable.

Examples:

     SELECT * FROM TBL_NAME WHERE KEY_COL1 < 10 OR KEY_COL2 < 20;

     SELECT * FROM TBL_NAME
       WHERE (KEY_COL1 > 10 OR KEY_COL2 = 20) AND NONKEY_COL=30;

The difference between the sort-union algorithm and the union algorithm
is that the sort-union algorithm must first fetch row IDs for all rows
and sort them before returning any rows.


File: manual.info,  Node: condition-pushdown-optimization,  Next: is-null-optimization,  Prev: index-merge-optimization,  Up: select-optimization

8.2.1.10 Engine Condition Pushdown Optimization
...............................................

This optimization improves the efficiency of direct comparisons between
a nonindexed column and a constant. In such cases, the condition is
`pushed down' to the storage engine for evaluation. This optimization
can be used only by the *Note `NDBCLUSTER': mysql-cluster. storage
engine.

For MySQL Cluster, this optimization can eliminate the need to send
nonmatching rows over the network between the cluster's data nodes and
the MySQL Server that issued the query, and can speed up queries where
it is used by a factor of 5 to 10 times over cases where condition
pushdown could be but is not used.

Suppose that a MySQL Cluster table is defined as follows:

     CREATE TABLE t1 (
         a INT,
         b INT,
         KEY(a)
     ) ENGINE=NDBCLUSTER;

Condition pushdown can be used with queries such as the one shown here,
which includes a comparison between a nonindexed column and a constant:

     SELECT a, b FROM t1 WHERE b = 10;

The use of condition pushdown can be seen in the output of *Note
`EXPLAIN': explain.:

     mysql> EXPLAIN SELECT a,b FROM t1 WHERE b = 10\G
     *************************** 1. row ***************************
                id: 1
       select_type: SIMPLE
             table: t1
              type: ALL
     possible_keys: NULL
               key: NULL
           key_len: NULL
               ref: NULL
              rows: 10
             Extra: Using where with pushed condition

However, condition pushdown _cannot_ be used with either of these two
queries:

     SELECT a,b FROM t1 WHERE a = 10;
     SELECT a,b FROM t1 WHERE b + 1 = 10;

Condition pushdown is not applicable to the first query because an
index exists on column `a'. (An index access method would be more
efficient and so would be chosen in preference to condition pushdown.)
Condition pushdown cannot be employed for the second query because the
comparison involving the nonindexed column `b' is indirect. (However,
condition pushdown could be applied if you were to reduce `b + 1 = 10'
to `b = 9' in the `WHERE' clause.)

Condition pushdown may also be employed when an indexed column is
compared with a constant using a `>' or `<' operator:

     mysql> EXPLAIN SELECT a, b FROM t1 WHERE a < 2\G
     *************************** 1. row ***************************
                id: 1
       select_type: SIMPLE
             table: t1
              type: range
     possible_keys: a
               key: a
           key_len: 5
               ref: NULL
              rows: 2
             Extra: Using where with pushed condition

Other supported comparisons for condition pushdown include the
following:

   * `COLUMN [NOT] LIKE PATTERN'

     PATTERN must be a string literal containing the pattern to be
     matched; for syntax, see *Note string-comparison-functions::.

   * `COLUMN IS [NOT] NULL'

   * `COLUMN IN (VALUE_LIST)'

     Each item in the VALUE_LIST must be a constant, literal value.

   * `COLUMN BETWEEN CONSTANT1 AND CONSTANT2'

     CONSTANT1 and CONSTANT2 must each be a constant, literal value.

In all of the cases in the preceding list, it is possible for the
condition to be converted into the form of one or more direct
comparisons between a column and a constant.

Engine condition pushdown is enabled by default. To disable it at
server startup, set the `optimizer_switch' system variable. For
example, in a `my.cnf' file, use these lines:

     [mysqld]
     optimizer_switch=engine_condition_pushdown=off

At runtime, disable condition pushdown like this:

     SET optimizer_switch='engine_condition_pushdown=off';

Before MySQL 5.5.3, disable condition pushdown using the
`engine_condition_pushdown' system variable. At server startup:

     [mysqld]
     engine_condition_pushdown=0

At runtime, use either of these statements:

     SET engine_condition_pushdown=OFF;

     SET engine_condition_pushdown=0;

Limitations

Condition pushdown is subject to the following limitations:

   * Condition pushdown is supported only by the *Note `NDBCLUSTER':
     mysql-cluster. storage engine.

   * Columns may be compared with constants only; however, this
     includes expressions which evaluate to constant values.

   * Columns used in comparisons cannot be of any of the *Note `BLOB':
     blob. or *Note `TEXT': blob. types.

   * A string value to be compared with a column must use the same
     collation as the column.

   * Joins are not directly supported; conditions involving multiple
     tables are pushed separately where possible. Use *Note `EXPLAIN
     EXTENDED': explain-extended. to determine which conditions are
     actually pushed down.


File: manual.info,  Node: is-null-optimization,  Next: left-join-optimization,  Prev: condition-pushdown-optimization,  Up: select-optimization

8.2.1.11 `IS NULL' Optimization
...............................

MySQL can perform the same optimization on COL_NAME `IS NULL' that it
can use for COL_NAME `=' CONSTANT_VALUE. For example, MySQL can use
indexes and ranges to search for `NULL' with `IS NULL'.

Examples:

     SELECT * FROM TBL_NAME WHERE KEY_COL IS NULL;

     SELECT * FROM TBL_NAME WHERE KEY_COL <=> NULL;

     SELECT * FROM TBL_NAME
       WHERE KEY_COL=CONST1 OR KEY_COL=CONST2 OR KEY_COL IS NULL;

If a `WHERE' clause includes a COL_NAME `IS NULL' condition for a
column that is declared as `NOT NULL', that expression is optimized
away. This optimization does not occur in cases when the column might
produce `NULL' anyway; for example, if it comes from a table on the
right side of a `LEFT JOIN'.

MySQL can also optimize the combination `COL_NAME = EXPR OR COL_NAME IS
NULL', a form that is common in resolved subqueries.  *Note `EXPLAIN':
explain. shows `ref_or_null' when this optimization is used.

This optimization can handle one `IS NULL' for any key part.

Some examples of queries that are optimized, assuming that there is an
index on columns `a' and `b' of table `t2':

     SELECT * FROM t1 WHERE t1.a=EXPR OR t1.a IS NULL;

     SELECT * FROM t1, t2 WHERE t1.a=t2.a OR t2.a IS NULL;

     SELECT * FROM t1, t2
       WHERE (t1.a=t2.a OR t2.a IS NULL) AND t2.b=t1.b;

     SELECT * FROM t1, t2
       WHERE t1.a=t2.a AND (t2.b=t1.b OR t2.b IS NULL);

     SELECT * FROM t1, t2
       WHERE (t1.a=t2.a AND t2.a IS NULL AND ...)
       OR (t1.a=t2.a AND t2.a IS NULL AND ...);

`ref_or_null' works by first doing a read on the reference key, and
then a separate search for rows with a `NULL' key value.

Note that the optimization can handle only one `IS NULL' level. In the
following query, MySQL uses key lookups only on the expression
`(t1.a=t2.a AND t2.a IS NULL)' and is not able to use the key part on
`b':

     SELECT * FROM t1, t2
       WHERE (t1.a=t2.a AND t2.a IS NULL)
       OR (t1.b=t2.b AND t2.b IS NULL);


File: manual.info,  Node: left-join-optimization,  Next: nested-loop-joins,  Prev: is-null-optimization,  Up: select-optimization

8.2.1.12 `LEFT JOIN' and `RIGHT JOIN' Optimization
..................................................

MySQL implements an `A LEFT JOIN B join_condition' as follows:

   * Table B is set to depend on table A and all tables on which A
     depends.

   * Table A is set to depend on all tables (except B) that are used in
     the `LEFT JOIN' condition.

   * The `LEFT JOIN' condition is used to decide how to retrieve rows
     from table B. (In other words, any condition in the `WHERE' clause
     is not used.)

   * All standard join optimizations are performed, with the exception
     that a table is always read after all tables on which it depends.
     If there is a circular dependence, MySQL issues an error.

   * All standard `WHERE' optimizations are performed.

   * If there is a row in A that matches the `WHERE' clause, but there
     is no row in B that matches the `ON' condition, an extra B row is
     generated with all columns set to `NULL'.

   * If you use `LEFT JOIN' to find rows that do not exist in some
     table and you have the following test: `COL_NAME IS NULL' in the
     `WHERE' part, where COL_NAME is a column that is declared as `NOT
     NULL', MySQL stops searching for more rows (for a particular key
     combination) after it has found one row that matches the `LEFT
     JOIN' condition.

The implementation of `RIGHT JOIN' is analogous to that of `LEFT JOIN'
with the roles of the tables reversed.

The join optimizer calculates the order in which tables should be
joined. The table read order forced by `LEFT JOIN' or `STRAIGHT_JOIN'
helps the join optimizer do its work much more quickly, because there
are fewer table permutations to check. Note that this means that if you
do a query of the following type, MySQL does a full scan on `b' because
the `LEFT JOIN' forces it to be read before `d':

     SELECT *
       FROM a JOIN b LEFT JOIN c ON (c.key=a.key)
       LEFT JOIN d ON (d.key=a.key)
       WHERE b.key=d.key;

The fix in this case is reverse the order in which `a' and `b' are
listed in the `FROM' clause:

     SELECT *
       FROM b JOIN a LEFT JOIN c ON (c.key=a.key)
       LEFT JOIN d ON (d.key=a.key)
       WHERE b.key=d.key;

For a `LEFT JOIN', if the `WHERE' condition is always false for the
generated `NULL' row, the `LEFT JOIN' is changed to a normal join. For
example, the `WHERE' clause would be false in the following query if
`t2.column1' were `NULL':

     SELECT * FROM t1 LEFT JOIN t2 ON (column1) WHERE t2.column2=5;

Therefore, it is safe to convert the query to a normal join:

     SELECT * FROM t1, t2 WHERE t2.column2=5 AND t1.column1=t2.column1;

This can be made faster because MySQL can use table `t2' before table
`t1' if doing so would result in a better query plan. To provide a hint
about the table join order, use `STRAIGHT_JOIN'. (See *Note select::.)


File: manual.info,  Node: nested-loop-joins,  Next: nested-join-optimization,  Prev: left-join-optimization,  Up: select-optimization

8.2.1.13 Nested-Loop Join Algorithms
....................................

MySQL executes joins between tables using a nested-loop algorithm or
variations on it.

*Nested-Loop Join Algorithm*

A simple nested-loop join (NLJ) algorithm reads rows from the first
table in a loop one at a time, passing each row to a nested loop that
processes the next table in the join. This process is repeated as many
times as there remain tables to be joined.

Assume that a join between three tables `t1', `t2', and `t3' is to be
executed using the following join types:

     Table   Join Type
     t1      range
     t2      ref
     t3      ALL

If a simple NLJ algorithm is used, the join is processed like this:

     for each row in t1 matching range {
       for each row in t2 matching reference key {
         for each row in t3 {
           if row satisfies join conditions,
           send to client
         }
       }
     }

Because the NLJ algorithm passes rows one at a time from outer loops to
inner loops, it typically reads tables processed in the inner loops
many times.

*Block Nested-Loop Join Algorithm*

A Block Nested-Loop (BNL) join algorithm uses buffering of rows read in
outer loops to reduce the number of times that tables in inner loops
must be read. For example, if 10 rows are read into a buffer and the
buffer is passed to the next inner loop, each row read in the inner
loop can be compared against all 10 rows in the buffer. The reduces the
number of times the inner table must be read by an order of magnitude.

MySQL uses join buffering under these conditions:

   * The `join_buffer_size' system variable determines the size of each
     join buffer.

   * Join buffering can be used when the join is of type `ALL' or
     `index' (in other words, when no possible keys can be used, and a
     full scan is done, of either the data or index rows,
     respectively), or `range'.

   * One buffer is allocated for each join that can be buffered, so a
     given query might be processed using multiple join buffers.

   * A join buffer is never allocated for the first nonconst table,
     even if it would be of type `ALL' or `index'.

   * A join buffer is allocated prior to executing the join and freed
     after the query is done.

   * Only columns of interest to the join are stored in the join
     buffer, not whole rows.

For the example join described previously for the NLJ algorithm
(without buffering), the join is done as follow using join buffering:

     for each row in t1 matching range {
       for each row in t2 matching reference key {
         store used columns from t1, t2 in join buffer
         if buffer is full {
           for each row in t3 {
             for each t1, t2 combination in join buffer {
               if row satisfies join conditions,
               send to client
             }
           }
           empty buffer
         }
       }
     }

     if buffer is not empty {
       for each row in t3 {
         for each t1, t2 combination in join buffer {
           if row satisfies join conditions,
           send to client
         }
       }
     }

If S is the size of each stored `t1', `t2' combination is the join
buffer and C is the number of combinations in the buffer, the number of
times table `t3' is scanned is:

     (S * C)/join_buffer_size + 1

The number of `t3' scans decreases as the value of `join_buffer_size'
increases, up to the point when `join_buffer_size' is large enough to
hold all previous row combinations. At that point, there is no speed to
be gained by making it larger.


File: manual.info,  Node: nested-join-optimization,  Next: outer-join-simplification,  Prev: nested-loop-joins,  Up: select-optimization

8.2.1.14 Nested Join Optimization
.................................

The syntax for expressing joins permits nested joins. The following
discussion refers to the join syntax described in *Note join::.

The syntax of TABLE_FACTOR is extended in comparison with the SQL
Standard. The latter accepts only TABLE_REFERENCE, not a list of them
inside a pair of parentheses. This is a conservative extension if we
consider each comma in a list of TABLE_REFERENCE items as equivalent to
an inner join. For example:

     SELECT * FROM t1 LEFT JOIN (t2, t3, t4)
                      ON (t2.a=t1.a AND t3.b=t1.b AND t4.c=t1.c)

is equivalent to:

     SELECT * FROM t1 LEFT JOIN (t2 CROSS JOIN t3 CROSS JOIN t4)
                      ON (t2.a=t1.a AND t3.b=t1.b AND t4.c=t1.c)

In MySQL, `CROSS JOIN' is a syntactic equivalent to `INNER JOIN' (they
can replace each other). In standard SQL, they are not equivalent.
`INNER JOIN' is used with an `ON' clause; `CROSS JOIN' is used
otherwise.

In general, parentheses can be ignored in join expressions containing
only inner join operations. After removing parentheses and grouping
operations to the left, the join expression:

     t1 LEFT JOIN (t2 LEFT JOIN t3 ON t2.b=t3.b OR t2.b IS NULL)
        ON t1.a=t2.a

transforms into the expression:

     (t1 LEFT JOIN t2 ON t1.a=t2.a) LEFT JOIN t3
         ON t2.b=t3.b OR t2.b IS NULL

Yet, the two expressions are not equivalent. To see this, suppose that
the tables `t1', `t2', and `t3' have the following state:

   * Table `t1' contains rows `(1)', `(2)'

   * Table `t2' contains row `(1,101)'

   * Table `t3' contains row `(101)'

In this case, the first expression returns a result set including the
rows `(1,1,101,101)', `(2,NULL,NULL,NULL)', whereas the second
expression returns the rows `(1,1,101,101)', `(2,NULL,NULL,101)':

     mysql> SELECT *
         -> FROM t1
         ->      LEFT JOIN
         ->      (t2 LEFT JOIN t3 ON t2.b=t3.b OR t2.b IS NULL)
         ->      ON t1.a=t2.a;
     +------+------+------+------+
     | a    | a    | b    | b    |
     +------+------+------+------+
     |    1 |    1 |  101 |  101 |
     |    2 | NULL | NULL | NULL |
     +------+------+------+------+

     mysql> SELECT *
         -> FROM (t1 LEFT JOIN t2 ON t1.a=t2.a)
         ->      LEFT JOIN t3
         ->      ON t2.b=t3.b OR t2.b IS NULL;
     +------+------+------+------+
     | a    | a    | b    | b    |
     +------+------+------+------+
     |    1 |    1 |  101 |  101 |
     |    2 | NULL | NULL |  101 |
     +------+------+------+------+

In the following example, an outer join operation is used together with
an inner join operation:

     t1 LEFT JOIN (t2, t3) ON t1.a=t2.a

That expression cannot be transformed into the following expression:

     t1 LEFT JOIN t2 ON t1.a=t2.a, t3.

For the given table states, the two expressions return different sets
of rows:

     mysql> SELECT *
         -> FROM t1 LEFT JOIN (t2, t3) ON t1.a=t2.a;
     +------+------+------+------+
     | a    | a    | b    | b    |
     +------+------+------+------+
     |    1 |    1 |  101 |  101 |
     |    2 | NULL | NULL | NULL |
     +------+------+------+------+

     mysql> SELECT *
         -> FROM t1 LEFT JOIN t2 ON t1.a=t2.a, t3;
     +------+------+------+------+
     | a    | a    | b    | b    |
     +------+------+------+------+
     |    1 |    1 |  101 |  101 |
     |    2 | NULL | NULL |  101 |
     +------+------+------+------+

Therefore, if we omit parentheses in a join expression with outer join
operators, we might change the result set for the original expression.

More exactly, we cannot ignore parentheses in the right operand of the
left outer join operation and in the left operand of a right join
operation. In other words, we cannot ignore parentheses for the inner
table expressions of outer join operations. Parentheses for the other
operand (operand for the outer table) can be ignored.

The following expression:

     (t1,t2) LEFT JOIN t3 ON P(t2.b,t3.b)

is equivalent to this expression:

     t1, t2 LEFT JOIN t3 ON P(t2.b,t3.b)

for any tables `t1,t2,t3' and any condition `P' over attributes `t2.b'
and `t3.b'.

Whenever the order of execution of the join operations in a join
expression (JOIN_TABLE) is not from left to right, we talk about nested
joins. Consider the following queries:

     SELECT * FROM t1 LEFT JOIN (t2 LEFT JOIN t3 ON t2.b=t3.b) ON t1.a=t2.a
       WHERE t1.a > 1

     SELECT * FROM t1 LEFT JOIN (t2, t3) ON t1.a=t2.a
       WHERE (t2.b=t3.b OR t2.b IS NULL) AND t1.a > 1

Those queries are considered to contain these nested joins:

     t2 LEFT JOIN t3 ON t2.b=t3.b
     t2, t3

The nested join is formed in the first query with a left join
operation, whereas in the second query it is formed with an inner join
operation.

In the first query, the parentheses can be omitted: The grammatical
structure of the join expression will dictate the same order of
execution for join operations. For the second query, the parentheses
cannot be omitted, although the join expression here can be interpreted
unambiguously without them.  (In our extended syntax the parentheses in
`(t2, t3)' of the second query are required, although theoretically the
query could be parsed without them: We still would have unambiguous
syntactical structure for the query because `LEFT JOIN' and `ON' would
play the role of the left and right delimiters for the expression
`(t2,t3)'.)

The preceding examples demonstrate these points:

   * For join expressions involving only inner joins (and not outer
     joins), parentheses can be removed. You can remove parentheses and
     evaluate left to right (or, in fact, you can evaluate the tables
     in any order).

   * The same is not true, in general, for outer joins or for outer
     joins mixed with inner joins. Removal of parentheses may change
     the result.

Queries with nested outer joins are executed in the same pipeline
manner as queries with inner joins. More exactly, a variation of the
nested-loop join algorithm is exploited.  Recall by what algorithmic
schema the nested-loop join executes a query. Suppose that we have a
join query over 3 tables `T1,T2,T3' of the form:

     SELECT * FROM T1 INNER JOIN T2 ON P1(T1,T2)
                      INNER JOIN T3 ON P2(T2,T3)
       WHERE P(T1,T2,T3).

Here, `P1(T1,T2)' and `P2(T3,T3)' are some join conditions (on
expressions), whereas `P(T1,T2,T3)' is a condition over columns of
tables `T1,T2,T3'.

The nested-loop join algorithm would execute this query in the
following manner:

     FOR each row t1 in T1 {
       FOR each row t2 in T2 such that P1(t1,t2) {
         FOR each row t3 in T3 such that P2(t2,t3) {
           IF P(t1,t2,t3) {
              t:=t1||t2||t3; OUTPUT t;
           }
         }
       }
     }

The notation `t1||t2||t3' means `a row constructed by concatenating the
columns of rows `t1', `t2', and `t3'.' In some of the following
examples, `NULL' where a row name appears means that `NULL' is used for
each column of that row. For example, `t1||t2||NULL' means `a row
constructed by concatenating the columns of rows `t1' and `t2', and
`NULL' for each column of `t3'.'

Now let's consider a query with nested outer joins:

     SELECT * FROM T1 LEFT JOIN
                   (T2 LEFT JOIN T3 ON P2(T2,T3))
                   ON P1(T1,T2)
       WHERE P(T1,T2,T3).

For this query, we modify the nested-loop pattern to get:

     FOR each row t1 in T1 {
       BOOL f1:=FALSE;
       FOR each row t2 in T2 such that P1(t1,t2) {
         BOOL f2:=FALSE;
         FOR each row t3 in T3 such that P2(t2,t3) {
           IF P(t1,t2,t3) {
             t:=t1||t2||t3; OUTPUT t;
           }
           f2=TRUE;
           f1=TRUE;
         }
         IF (!f2) {
           IF P(t1,t2,NULL) {
             t:=t1||t2||NULL; OUTPUT t;
           }
           f1=TRUE;
         }
       }
       IF (!f1) {
         IF P(t1,NULL,NULL) {
           t:=t1||NULL||NULL; OUTPUT t;
         }
       }
     }

In general, for any nested loop for the first inner table in an outer
join operation, a flag is introduced that is turned off before the loop
and is checked after the loop. The flag is turned on when for the
current row from the outer table a match from the table representing
the inner operand is found.  If at the end of the loop cycle the flag
is still off, no match has been found for the current row of the outer
table.  In this case, the row is complemented by `NULL' values for the
columns of the inner tables. The result row is passed to the final
check for the output or into the next nested loop, but only if the row
satisfies the join condition of all embedded outer joins.

In our example, the outer join table expressed by the following
expression is embedded:

     (T2 LEFT JOIN T3 ON P2(T2,T3))

Note that for the query with inner joins, the optimizer could choose a
different order of nested loops, such as this one:

     FOR each row t3 in T3 {
       FOR each row t2 in T2 such that P2(t2,t3) {
         FOR each row t1 in T1 such that P1(t1,t2) {
           IF P(t1,t2,t3) {
              t:=t1||t2||t3; OUTPUT t;
           }
         }
       }
     }

For the queries with outer joins, the optimizer can choose only such an
order where loops for outer tables precede loops for inner tables.
Thus, for our query with outer joins, only one nesting order is
possible. For the following query, the optimizer will evaluate two
different nestings:

     SELECT * T1 LEFT JOIN (T2,T3) ON P1(T1,T2) AND P2(T1,T3)
       WHERE P(T1,T2,T3)

The nestings are these:

     FOR each row t1 in T1 {
       BOOL f1:=FALSE;
       FOR each row t2 in T2 such that P1(t1,t2) {
         FOR each row t3 in T3 such that P2(t1,t3) {
           IF P(t1,t2,t3) {
             t:=t1||t2||t3; OUTPUT t;
           }
           f1:=TRUE
         }
       }
       IF (!f1) {
         IF P(t1,NULL,NULL) {
           t:=t1||NULL||NULL; OUTPUT t;
         }
       }
     }

and:

     FOR each row t1 in T1 {
       BOOL f1:=FALSE;
       FOR each row t3 in T3 such that P2(t1,t3) {
         FOR each row t2 in T2 such that P1(t1,t2) {
           IF P(t1,t2,t3) {
             t:=t1||t2||t3; OUTPUT t;
           }
           f1:=TRUE
         }
       }
       IF (!f1) {
         IF P(t1,NULL,NULL) {
           t:=t1||NULL||NULL; OUTPUT t;
         }
       }
     }

In both nestings, `T1' must be processed in the outer loop because it
is used in an outer join.  `T2' and `T3' are used in an inner join, so
that join must be processed in the inner loop.  However, because the
join is an inner join, `T2' and `T3' can be processed in either order.

When discussing the nested-loop algorithm for inner joins, we omitted
some details whose impact on the performance of query execution may be
huge. We did not mention so-called `pushed-down' conditions. Suppose
that our `WHERE' condition `P(T1,T2,T3)' can be represented by a
conjunctive formula:

     P(T1,T2,T2) = C1(T1) AND C2(T2) AND C3(T3).

In this case, MySQL actually uses the following nested-loop schema for
the execution of the query with inner joins:

     FOR each row t1 in T1 such that C1(t1) {
       FOR each row t2 in T2 such that P1(t1,t2) AND C2(t2)  {
         FOR each row t3 in T3 such that P2(t2,t3) AND C3(t3) {
           IF P(t1,t2,t3) {
              t:=t1||t2||t3; OUTPUT t;
           }
         }
       }
     }

You see that each of the conjuncts `C1(T1)', `C2(T2)', `C3(T3)' are
pushed out of the most inner loop to the most outer loop where it can
be evaluated. If `C1(T1)' is a very restrictive condition, this
condition pushdown may greatly reduce the number of rows from table `T1'
passed to the inner loops. As a result, the execution time for the
query may improve immensely.

For a query with outer joins, the `WHERE' condition is to be checked
only after it has been found that the current row from the outer table
has a match in the inner tables. Thus, the optimization of pushing
conditions out of the inner nested loops cannot be applied directly to
queries with outer joins. Here we have to introduce conditional
pushed-down predicates guarded by the flags that are turned on when a
match has been encountered.

For our example with outer joins with:

     P(T1,T2,T3)=C1(T1) AND C(T2) AND C3(T3)

the nested-loop schema using guarded pushed-down conditions looks like
this:

     FOR each row t1 in T1 such that C1(t1) {
       BOOL f1:=FALSE;
       FOR each row t2 in T2
           such that P1(t1,t2) AND (f1?C2(t2):TRUE) {
         BOOL f2:=FALSE;
         FOR each row t3 in T3
             such that P2(t2,t3) AND (f1&&f2?C3(t3):TRUE) {
           IF (f1&&f2?TRUE:(C2(t2) AND C3(t3))) {
             t:=t1||t2||t3; OUTPUT t;
           }
           f2=TRUE;
           f1=TRUE;
         }
         IF (!f2) {
           IF (f1?TRUE:C2(t2) && P(t1,t2,NULL)) {
             t:=t1||t2||NULL; OUTPUT t;
           }
           f1=TRUE;
         }
       }
       IF (!f1 && P(t1,NULL,NULL)) {
           t:=t1||NULL||NULL; OUTPUT t;
       }
     }

In general, pushed-down predicates can be extracted from join
conditions such as `P1(T1,T2)' and `P(T2,T3)'. In this case, a
pushed-down predicate is guarded also by a flag that prevents checking
the predicate for the `NULL'-complemented row generated by the
corresponding outer join operation.

Note that access by key from one inner table to another in the same
nested join is prohibited if it is induced by a predicate from the
`WHERE' condition. (We could use conditional key access in this case,
but this technique is not employed yet in MySQL 5.5.)


File: manual.info,  Node: outer-join-simplification,  Next: order-by-optimization,  Prev: nested-join-optimization,  Up: select-optimization

8.2.1.15 Outer Join Simplification
..................................

Table expressions in the `FROM' clause of a query are simplified in
many cases.

At the parser stage, queries with right outer joins operations are
converted to equivalent queries containing only left join operations.
In the general case, the conversion is performed according to the
following rule:

     (T1, ...) RIGHT JOIN (T2,...) ON P(T1,...,T2,...) =
     (T2, ...) LEFT JOIN (T1,...) ON P(T1,...,T2,...)

All inner join expressions of the form `T1 INNER JOIN T2 ON P(T1,T2)'
are replaced by the list `T1,T2', `P(T1,T2)' being joined as a conjunct
to the `WHERE' condition (or to the join condition of the embedding
join, if there is any).

When the optimizer evaluates plans for join queries with outer join
operation, it takes into consideration only the plans where, for each
such operation, the outer tables are accessed before the inner tables.
The optimizer options are limited because only such plans enables us to
execute queries with outer joins operations by the nested loop schema.

Suppose that we have a query of the form:

     SELECT * T1 LEFT JOIN T2 ON P1(T1,T2)
       WHERE P(T1,T2) AND R(T2)

with `R(T2)' narrowing greatly the number of matching rows from table
`T2'. If we executed the query as it is, the optimizer would have no
other choice besides to access table `T1' before table `T2' that may
lead to a very inefficient execution plan.

Fortunately, MySQL converts such a query into a query without an outer
join operation if the `WHERE' condition is null-rejected. A condition
is called null-rejected for an outer join operation if it evaluates to
`FALSE' or to `UNKNOWN' for any `NULL'-complemented row built for the
operation.

Thus, for this outer join:

     T1 LEFT JOIN T2 ON T1.A=T2.A

Conditions such as these are null-rejected:

     T2.B IS NOT NULL,
     T2.B > 3,
     T2.C <= T1.C,
     T2.B < 2 OR T2.C > 1

Conditions such as these are not null-rejected:

     T2.B IS NULL,
     T1.B < 3 OR T2.B IS NOT NULL,
     T1.B < 3 OR T2.B > 3

The general rules for checking whether a condition is null-rejected for
an outer join operation are simple. A condition is null-rejected in the
following cases:

   * If it is of the form `A IS NOT NULL', where `A' is an attribute of
     any of the inner tables

   * If it is a predicate containing a reference to an inner table that
     evaluates to `UNKNOWN' when one of its arguments is `NULL'

   * If it is a conjunction containing a null-rejected condition as a
     conjunct

   * If it is a disjunction of null-rejected conditions

A condition can be null-rejected for one outer join operation in a
query and not null-rejected for another. In the query:

     SELECT * FROM T1 LEFT JOIN T2 ON T2.A=T1.A
                      LEFT JOIN T3 ON T3.B=T1.B
       WHERE T3.C > 0

the `WHERE' condition is null-rejected for the second outer join
operation but is not null-rejected for the first one.

If the `WHERE' condition is null-rejected for an outer join operation
in a query, the outer join operation is replaced by an inner join
operation.

For example, the preceding query is replaced with the query:

     SELECT * FROM T1 LEFT JOIN T2 ON T2.A=T1.A
                      INNER JOIN T3 ON T3.B=T1.B
       WHERE T3.C > 0

For the original query, the optimizer would evaluate plans compatible
with only one access order `T1,T2,T3'. For the replacing query, it
additionally considers the access sequence `T3,T1,T2'.

A conversion of one outer join operation may trigger a conversion of
another. Thus, the query:

     SELECT * FROM T1 LEFT JOIN T2 ON T2.A=T1.A
                      LEFT JOIN T3 ON T3.B=T2.B
       WHERE T3.C > 0

will be first converted to the query:

     SELECT * FROM T1 LEFT JOIN T2 ON T2.A=T1.A
                      INNER JOIN T3 ON T3.B=T2.B
       WHERE T3.C > 0

which is equivalent to the query:

     SELECT * FROM (T1 LEFT JOIN T2 ON T2.A=T1.A), T3
       WHERE T3.C > 0 AND T3.B=T2.B

Now the remaining outer join operation can be replaced by an inner
join, too, because the condition `T3.B=T2.B' is null-rejected and we
get a query without outer joins at all:

     SELECT * FROM (T1 INNER JOIN T2 ON T2.A=T1.A), T3
       WHERE T3.C > 0 AND T3.B=T2.B

Sometimes we succeed in replacing an embedded outer join operation, but
cannot convert the embedding outer join. The following query:

     SELECT * FROM T1 LEFT JOIN
                   (T2 LEFT JOIN T3 ON T3.B=T2.B)
                   ON T2.A=T1.A
       WHERE T3.C > 0

is converted to:

     SELECT * FROM T1 LEFT JOIN
                   (T2 INNER JOIN T3 ON T3.B=T2.B)
                   ON T2.A=T1.A
       WHERE T3.C > 0,

That can be rewritten only to the form still containing the embedding
outer join operation:

     SELECT * FROM T1 LEFT JOIN
                   (T2,T3)
                   ON (T2.A=T1.A AND T3.B=T2.B)
       WHERE T3.C > 0.

When trying to convert an embedded outer join operation in a query, we
must take into account the join condition for the embedding outer join
together with the `WHERE' condition. In the query:

     SELECT * FROM T1 LEFT JOIN
                   (T2 LEFT JOIN T3 ON T3.B=T2.B)
                   ON T2.A=T1.A AND T3.C=T1.C
       WHERE T3.D > 0 OR T1.D > 0

the `WHERE' condition is not null-rejected for the embedded outer join,
but the join condition of the embedding outer join `T2.A=T1.A AND
T3.C=T1.C' is null-rejected. So the query can be converted to:

     SELECT * FROM T1 LEFT JOIN
                   (T2, T3)
                   ON T2.A=T1.A AND T3.C=T1.C AND T3.B=T2.B
       WHERE T3.D > 0 OR T1.D > 0


File: manual.info,  Node: order-by-optimization,  Next: group-by-optimization,  Prev: outer-join-simplification,  Up: select-optimization

8.2.1.16 `ORDER BY' Optimization
................................

In some cases, MySQL can use an index to satisfy an `ORDER BY' clause
without doing any extra sorting.

The index can also be used even if the `ORDER BY' does not match the
index exactly, as long as all of the unused portions of the index and
all the extra `ORDER BY' columns are constants in the `WHERE' clause.
The following queries use the index to resolve the `ORDER BY' part:

     SELECT * FROM t1
       ORDER BY KEY_PART1,KEY_PART2,... ;

     SELECT * FROM t1
       WHERE KEY_PART1 = CONSTANT
       ORDER BY KEY_PART2;

     SELECT * FROM t1
       ORDER BY KEY_PART1 DESC, KEY_PART2 DESC;

     SELECT * FROM t1
       WHERE KEY_PART1 = 1
       ORDER BY KEY_PART1 DESC, KEY_PART2 DESC;

     SELECT * FROM t1
       WHERE KEY_PART1 > CONSTANT
       ORDER BY KEY_PART1 ASC;

     SELECT * FROM t1
       WHERE KEY_PART1 < CONSTANT
       ORDER BY KEY_PART1 DESC;

     SELECT * FROM t1
       WHERE KEY_PART1 = CONSTANT1 AND KEY_PART2 > CONSTANT2
       ORDER BY KEY_PART2;

In some cases, MySQL _cannot_ use indexes to resolve the `ORDER BY',
although it still uses indexes to find the rows that match the `WHERE'
clause. These cases include the following:

   * You use `ORDER BY' on different keys:

          SELECT * FROM t1 ORDER BY KEY1, KEY2;

   * You use `ORDER BY' on nonconsecutive parts of a key:

          SELECT * FROM t1 WHERE KEY2=CONSTANT ORDER BY KEY_PART2;

   * You mix `ASC' and `DESC':

          SELECT * FROM t1 ORDER BY KEY_PART1 DESC, KEY_PART2 ASC;

   * The key used to fetch the rows is not the same as the one used in
     the `ORDER BY':

          SELECT * FROM t1 WHERE KEY2=CONSTANT ORDER BY KEY1;

   * You use `ORDER BY' with an expression that includes terms other
     than the key column name:

          SELECT * FROM t1 ORDER BY ABS(KEY);
          SELECT * FROM t1 ORDER BY -KEY;

   * You are joining many tables, and the columns in the `ORDER BY' are
     not all from the first nonconstant table that is used to retrieve
     rows. (This is the first table in the *Note `EXPLAIN': explain.
     output that does not have a `const' join type.)

   * You have different `ORDER BY' and `GROUP BY' expressions.

   * You index only a prefix of a column named in the `ORDER BY'
     clause. In this case, the index cannot be used to fully resolve
     the sort order. For example, if you have a *Note `CHAR(20)': char.
     column, but index only the first 10 bytes, the index cannot
     distinguish values past the 10th byte and a `filesort' will be
     needed.

   * The type of table index used does not store rows in order.  For
     example, this is true for a `HASH' index in a `MEMORY' table.

Availability of an index for sorting may be affected by the use of
column aliases. Suppose that the column `t1.a' is indexed. In this
statement, the name of the column in the select list is `a'.  It refers
to `t1.a', so for the reference to `a' in the `ORDER BY', the index can
be used:

     SELECT a FROM t1 ORDER BY a;

In this statement, the name of the column in the select list is also
`a', but it is the alias name. It refers to `ABS(a)', so for the
reference to `a' in the `ORDER BY', the index cannot be used:

     SELECT ABS(a) AS a FROM t1 ORDER BY a;

In the following statement, the `ORDER BY' refers to a name that is not
the name of a column in the select list. But there is a column in `t1'
named `a', so the `ORDER BY' uses that, and the index can be used. (The
resulting sort order may be completely different from the order for
`ABS(a)', of course.)

     SELECT ABS(a) AS b FROM t1 ORDER BY a;

By default, MySQL sorts all `GROUP BY COL1, COL2, ...' queries as if
you specified `ORDER BY COL1, COL2, ...' in the query as well. If you
include an `ORDER BY' clause explicitly that contains the same column
list, MySQL optimizes it away without any speed penalty, although the
sorting still occurs. If a query includes `GROUP BY' but you want to
avoid the overhead of sorting the result, you can suppress sorting by
specifying `ORDER BY NULL'. For example:

     INSERT INTO foo
     SELECT a, COUNT(*) FROM bar GROUP BY a ORDER BY NULL;

Relying on implicit `GROUP BY' sorting in MySQL 5.5 is deprecated. To
achieve a specific sort order of grouped results, it is preferable to
use an explicit `ORDER BY' clause. `GROUP BY' sorting is a MySQL
extension that may change in a future release; for example, to make it
possible for the optimizer to order groupings in whatever manner it
deems most efficient and to avoid the sorting overhead.

With *Note `EXPLAIN SELECT ... ORDER BY': explain, you can check
whether MySQL can use indexes to resolve the query. It cannot if you see
`Using filesort' in the `Extra' column. See *Note using-explain::.
Filesort uses a fixed-length row-storage format similar to that used by
the *Note `MEMORY': memory-storage-engine. storage engine.
Variable-length types such as *Note `VARCHAR': char. are stored using a
fixed length.

MySQL has two `filesort' algorithms for sorting and retrieving results.
The original method uses only the `ORDER BY' columns. The modified
method uses not just the `ORDER BY' columns, but all the columns used
in the query.

The optimizer selects which `filesort' algorithm to use. It normally
uses the modified algorithm except when *Note `BLOB': blob. or *Note
`TEXT': blob. columns are involved, in which case it uses the original
algorithm.

The original `filesort' algorithm works as follows:

  1. Read all rows according to key or by table scanning. Rows that do
     not match the `WHERE' clause are skipped.

  2. For each row, store a pair of values in a buffer (the sort key and
     the row pointer). The size of the buffer is the value of the
     `sort_buffer_size' system variable.

  3. When the buffer gets full, run a qsort (quicksort) on it and store
     the result in a temporary file. Save a pointer to the sorted
     block. (If all pairs fit into the sort buffer, no temporary file
     is created.)

  4. Repeat the preceding steps until all rows have been read.

  5. Do a multi-merge of up to `MERGEBUFF' (7) regions to one block in
     another temporary file. Repeat until all blocks from the first
     file are in the second file.

  6. Repeat the following until there are fewer than `MERGEBUFF2' (15)
     blocks left.

  7. On the last multi-merge, only the pointer to the row (the last
     part of the sort key) is written to a result file.

  8. Read the rows in sorted order by using the row pointers in the
     result file. To optimize this, we read in a big block of row
     pointers, sort them, and use them to read the rows in sorted order
     into a row buffer. The size of the buffer is the value of the
     `read_rnd_buffer_size' system variable. The code for this step is
     in the `sql/records.cc' source file.

One problem with this approach is that it reads rows twice: One time
when evaluating the `WHERE' clause, and again after sorting the pair
values. And even if the rows were accessed successively the first time
(for example, if a table scan is done), the second time they are
accessed randomly. (The sort keys are ordered, but the row positions
are not.)

The modified `filesort' algorithm incorporates an optimization such
that it records not only the sort key value and row position, but also
the columns required for the query. This avoids reading the rows twice.
The modified `filesort' algorithm works like this:

  1. Read the rows that match the `WHERE' clause.

  2. For each row, record a tuple of values consisting of the sort key
     value and row position, and also the columns required for the
     query.

  3. Sort the tuples by sort key value

  4. Retrieve the rows in sorted order, but read the required columns
     directly from the sorted tuples rather than by accessing the table
     a second time.

Using the modified `filesort' algorithm, the tuples are longer than the
pairs used in the original method, and fewer of them fit in the sort
buffer (the size of which is given by `sort_buffer_size').  As a
result, it is possible for the extra I/O to make the modified approach
slower, not faster. To avoid a slowdown, the optimization is used only
if the total size of the extra columns in the sort tuple does not
exceed the value of the `max_length_for_sort_data' system variable. (A
symptom of setting the value of this variable too high is a combination
of high disk activity and low CPU activity.)

For slow queries for which `filesort' is not used, try lowering
`max_length_for_sort_data' to a value that is appropriate to trigger a
`filesort'.

If you want to increase `ORDER BY' speed, check whether you can get
MySQL to use indexes rather than an extra sorting phase. If this is not
possible, you can try the following strategies:

   * Increase the size of the `sort_buffer_size' variable.

   * Increase the size of the `read_rnd_buffer_size' variable.

   * Use less RAM per row by declaring columns only as large as they
     need to be to hold the values stored in them. For example,
     `CHAR(16)' is better than `CHAR(200)' if values never exceed 16
     characters.

   * Change `tmpdir' to point to a dedicated file system with large
     amounts of free space.  Also, this option accepts several paths
     that are used in round-robin fashion, so you can use this feature
     to spread the load across several directories. Paths should be
     separated by colon characters (``:'') on Unix and semicolon
     characters (``;'') on Windows. The paths should be for directories
     in file systems that are located on different _physical_ disks,
     not different partitions on the same disk.


File: manual.info,  Node: group-by-optimization,  Next: distinct-optimization,  Prev: order-by-optimization,  Up: select-optimization

8.2.1.17 `GROUP BY' Optimization
................................

* Menu:

* loose-index-scan::             Loose Index Scan
* tight-index-scan::             Tight Index Scan

The most general way to satisfy a `GROUP BY' clause is to scan the
whole table and create a new temporary table where all rows from each
group are consecutive, and then use this temporary table to discover
groups and apply aggregate functions (if any). In some cases, MySQL is
able to do much better than that and to avoid creation of temporary
tables by using index access.

The most important preconditions for using indexes for `GROUP BY' are
that all `GROUP BY' columns reference attributes from the same index,
and that the index stores its keys in order (for example, this is a
`BTREE' index and not a `HASH' index). Whether use of temporary tables
can be replaced by index access also depends on which parts of an index
are used in a query, the conditions specified for these parts, and the
selected aggregate functions.

There are two ways to execute a `GROUP BY' query through index access,
as detailed in the following sections. In the first method, the
grouping operation is applied together with all range predicates (if
any). The second method first performs a range scan, and then groups the
resulting tuples.

In MySQL, `GROUP BY' is used for sorting, so the server may also apply
`ORDER BY' optimizations to grouping. See *Note order-by-optimization::.


File: manual.info,  Node: loose-index-scan,  Next: tight-index-scan,  Prev: group-by-optimization,  Up: group-by-optimization

8.2.1.18 Loose Index Scan
.........................

The most efficient way to process `GROUP BY' is when an index is used
to directly retrieve the grouping columns. With this access method,
MySQL uses the property of some index types that the keys are ordered
(for example, `BTREE'). This property enables use of lookup groups in
an index without having to consider all keys in the index that satisfy
all `WHERE' conditions. This access method considers only a fraction of
the keys in an index, so it is called a _loose index scan_. When there
is no `WHERE' clause, a loose index scan reads as many keys as the
number of groups, which may be a much smaller number than that of all
keys. If the `WHERE' clause contains range predicates (see the
discussion of the `range' join type in *Note using-explain::), a loose
index scan looks up the first key of each group that satisfies the range
conditions, and again reads the least possible number of keys. This is
possible under the following conditions:

   * The query is over a single table.

   * The `GROUP BY' names only columns that form a leftmost prefix of
     the index and no other columns. (If, instead of `GROUP BY', the
     query has a `DISTINCT' clause, all distinct attributes refer to
     columns that form a leftmost prefix of the index.) For example, if
     a table `t1' has an index on `(c1,c2,c3)', loose index scan is
     applicable if the query has `GROUP BY c1, c2,'. It is not
     applicable if the query has `GROUP BY c2, c3' (the columns are not
     a leftmost prefix) or `GROUP BY c1, c2, c4' (`c4' is not in the
     index).

   * The only aggregate functions used in the select list (if any) are
     `MIN()' and `MAX()', and all of them refer to the same column. The
     column must be in the index and must follow the columns in the
     `GROUP BY'.

   * Any other parts of the index than those from the `GROUP BY'
     referenced in the query must be constants (that is, they must be
     referenced in equalities with constants), except for the argument
     of `MIN()' or `MAX()' functions.

   * For columns in the index, full column values must be indexed, not
     just a prefix. For example, with `c1 VARCHAR(20), INDEX (c1(10))',
     the index cannot be used for loose index scan.

If loose index scan is applicable to a query, the *Note `EXPLAIN':
explain. output shows `Using index for group-by' in the `Extra' column.

Assume that there is an index `idx(c1,c2,c3)' on table
`t1(c1,c2,c3,c4)'. The loose index scan access method can be used for
the following queries:

     SELECT c1, c2 FROM t1 GROUP BY c1, c2;
     SELECT DISTINCT c1, c2 FROM t1;
     SELECT c1, MIN(c2) FROM t1 GROUP BY c1;
     SELECT c1, c2 FROM t1 WHERE c1 < CONST GROUP BY c1, c2;
     SELECT MAX(c3), MIN(c3), c1, c2 FROM t1 WHERE c2 > CONST GROUP BY c1, c2;
     SELECT c2 FROM t1 WHERE c1 < CONST GROUP BY c1, c2;
     SELECT c1, c2 FROM t1 WHERE c3 = CONST GROUP BY c1, c2;

The following queries cannot be executed with this quick select method,
for the reasons given:

   * There are aggregate functions other than `MIN()' or `MAX()':

          SELECT c1, SUM(c2) FROM t1 GROUP BY c1;

   * The columns in the `GROUP BY' clause do not form a leftmost prefix
     of the index:

          SELECT c1, c2 FROM t1 GROUP BY c2, c3;

   * The query refers to a part of a key that comes after the `GROUP
     BY' part, and for which there is no equality with a constant:

          SELECT c1, c3 FROM t1 GROUP BY c1, c2;

     Were the query to include `WHERE c3 = CONST', loose index scan
     could be used.

As of MySQL 5.5, the loose index scan access method can be applied to
other forms of aggregate function references in the select list, in
addition to the `MIN()' and `MAX()' references already supported:

   * `AVG(DISTINCT)', `SUM(DISTINCT)', and `COUNT(DISTINCT)' are
     supported. `AVG(DISTINCT)' and `SUM(DISTINCT)' take a single
     argument.  `COUNT(DISTINCT)' can have more than one column
     argument.

   * There must be no `GROUP BY' or `DISTINCT' clause in the query.

   * The loose scan limitations described earlier still apply.

Assume that there is an index `idx(c1,c2,c3)' on table
`t1(c1,c2,c3,c4)'. The loose index scan access method can be used for
the following queries:

     SELECT COUNT(DISTINCT c1), SUM(DISTINCT c1) FROM t1;

     SELECT COUNT(DISTINCT c1, c2), COUNT(DISTINCT c2, c1) FROM t1;

Loose index scan is not applicable for the following queries:

     SELECT DISTINCT COUNT(DISTINCT c1) FROM t1;

     SELECT COUNT(DISTINCT c1) FROM t1 GROUP BY c1;


File: manual.info,  Node: tight-index-scan,  Prev: loose-index-scan,  Up: group-by-optimization

8.2.1.19 Tight Index Scan
.........................

A tight index scan may be either a full index scan or a range index
scan, depending on the query conditions.

When the conditions for a loose index scan are not met, it still may be
possible to avoid creation of temporary tables for `GROUP BY' queries.
If there are range conditions in the `WHERE' clause, this method reads
only the keys that satisfy these conditions.  Otherwise, it performs an
index scan. Because this method reads all keys in each range defined by
the `WHERE' clause, or scans the whole index if there are no range
conditions, we term it a _tight index scan_. With a tight index scan,
the grouping operation is performed only after all keys that satisfy
the range conditions have been found.

For this method to work, it is sufficient that there is a constant
equality condition for all columns in a query referring to parts of the
key coming before or in between parts of the `GROUP BY' key. The
constants from the equality conditions fill in any `gaps' in the search
keys so that it is possible to form complete prefixes of the index.
These index prefixes then can be used for index lookups. If we require
sorting of the `GROUP BY' result, and it is possible to form search
keys that are prefixes of the index, MySQL also avoids extra sorting
operations because searching with prefixes in an ordered index already
retrieves all the keys in order.

Assume that there is an index `idx(c1,c2,c3)' on table
`t1(c1,c2,c3,c4)'. The following queries do not work with the loose
index scan access method described earlier, but still work with the
tight index scan access method.

   * There is a gap in the `GROUP BY', but it is covered by the
     condition `c2 = 'a'':

          SELECT c1, c2, c3 FROM t1 WHERE c2 = 'a' GROUP BY c1, c3;

   * The `GROUP BY' does not begin with the first part of the key, but
     there is a condition that provides a constant for that part:

          SELECT c1, c2, c3 FROM t1 WHERE c1 = 'a' GROUP BY c2, c3;


File: manual.info,  Node: distinct-optimization,  Next: subquery-optimization-with-exists,  Prev: group-by-optimization,  Up: select-optimization

8.2.1.20 `DISTINCT' Optimization
................................

`DISTINCT' combined with `ORDER BY' needs a temporary table in many
cases.

Because `DISTINCT' may use `GROUP BY', learn how MySQL works with
columns in `ORDER BY' or `HAVING' clauses that are not part of the
selected columns. See *Note group-by-extensions::.

In most cases, a `DISTINCT' clause can be considered as a special case
of `GROUP BY'.  For example, the following two queries are equivalent:

     SELECT DISTINCT c1, c2, c3 FROM t1
     WHERE c1 > CONST;

     SELECT c1, c2, c3 FROM t1
     WHERE c1 > CONST GROUP BY c1, c2, c3;

Due to this equivalence, the optimizations applicable to `GROUP BY'
queries can be also applied to queries with a `DISTINCT' clause. Thus,
for more details on the optimization possibilities for `DISTINCT'
queries, see *Note group-by-optimization::.

When combining `LIMIT ROW_COUNT' with `DISTINCT', MySQL stops as soon
as it finds ROW_COUNT unique rows.

If you do not use columns from all tables named in a query, MySQL stops
scanning any unused tables as soon as it finds the first match. In the
following case, assuming that `t1' is used before `t2' (which you can
check with *Note `EXPLAIN': explain.), MySQL stops reading from `t2'
(for any particular row in `t1') when it finds the first row in `t2':

     SELECT DISTINCT t1.a FROM t1, t2 where t1.a=t2.a;


File: manual.info,  Node: subquery-optimization-with-exists,  Next: limit-optimization,  Prev: distinct-optimization,  Up: select-optimization

8.2.1.21 Optimizing Subqueries with `EXISTS' Strategy
.....................................................

Certain optimizations are applicable to comparisons that use the `IN'
operator to test subquery results (or that use `=ANY', which is
equivalent).  This section discusses these optimizations, particularly
with regard to the challenges that `NULL' values present. The last part
of the discussion includes suggestions on what you can do to help the
optimizer.

Consider the following subquery comparison:

     OUTER_EXPR IN (SELECT INNER_EXPR FROM ... WHERE SUBQUERY_WHERE)

MySQL evaluates queries `from outside to inside.' That is, it first
obtains the value of the outer expression OUTER_EXPR, and then runs the
subquery and captures the rows that it produces.

A very useful optimization is to `inform' the subquery that the only
rows of interest are those where the inner expression INNER_EXPR is
equal to OUTER_EXPR. This is done by pushing down an appropriate
equality into the subquery's `WHERE' clause. That is, the comparison is
converted to this:

     EXISTS (SELECT 1 FROM ... WHERE SUBQUERY_WHERE AND OUTER_EXPR=INNER_EXPR)

After the conversion, MySQL can use the pushed-down equality to limit
the number of rows that it must examine when evaluating the subquery.

More generally, a comparison of N values to a subquery that returns
N-value rows is subject to the same conversion. If OE_I and IE_I
represent corresponding outer and inner expression values, this
subquery comparison:

     (OE_1, ..., OE_N) IN
       (SELECT IE_1, ..., IE_N FROM ... WHERE SUBQUERY_WHERE)

Becomes:

     EXISTS (SELECT 1 FROM ... WHERE SUBQUERY_WHERE
                               AND OE_1 = IE_1
                               AND ...
                               AND OE_N = IE_N)

The following discussion assumes a single pair of outer and inner
expression values for simplicity.

The conversion just described has its limitations. It is valid only if
we ignore possible `NULL' values.  That is, the `pushdown' strategy
works as long as both of these two conditions are true:

   * OUTER_EXPR and INNER_EXPR cannot be `NULL'.

   * You do not need to distinguish `NULL' from `FALSE' subquery
     results. (If the subquery is a part of an `OR' or `AND' expression
     in the `WHERE' clause, MySQL assumes that you do not care.)

When either or both of those conditions do not hold, optimization is
more complex.

Suppose that OUTER_EXPR is known to be a non-`NULL' value but the
subquery does not produce a row such that OUTER_EXPR = INNER_EXPR. Then
`OUTER_EXPR IN (SELECT ...)' evaluates as follows:

   * `NULL', if the *Note `SELECT': select. produces any row where
     INNER_EXPR is `NULL'

   * `FALSE', if the *Note `SELECT': select. produces only non-`NULL'
     values or produces nothing

In this situation, the approach of looking for rows with `OUTER_EXPR =
INNER_EXPR' is no longer valid. It is necessary to look for such rows,
but if none are found, also look for rows where INNER_EXPR is `NULL'.
Roughly speaking, the subquery can be converted to:

     EXISTS (SELECT 1 FROM ... WHERE SUBQUERY_WHERE AND
             (OUTER_EXPR=INNER_EXPR OR INNER_EXPR IS NULL))

The need to evaluate the extra `IS NULL' condition is why MySQL has the
`ref_or_null' access method:

     mysql> EXPLAIN
         -> SELECT OUTER_EXPR IN (SELECT t2.maybe_null_key
         ->                       FROM t2, t3 WHERE ...)
         -> FROM t1;
     *************************** 1. row ***************************
                id: 1
       select_type: PRIMARY
             table: t1
     ...
     *************************** 2. row ***************************
                id: 2
       select_type: DEPENDENT SUBQUERY
             table: t2
              type: ref_or_null
     possible_keys: maybe_null_key
               key: maybe_null_key
           key_len: 5
               ref: func
              rows: 2
             Extra: Using where; Using index
     ...

The `unique_subquery' and `index_subquery' subquery-specific access
methods also have `or `NULL'' variants. However, they are not visible
in *Note `EXPLAIN': explain. output, so you must use *Note `EXPLAIN
EXTENDED': explain-extended. followed by *Note `SHOW WARNINGS':
show-warnings. (note the `checking NULL' in the warning message):

     mysql> EXPLAIN EXTENDED
         -> SELECT OUTER_EXPR IN (SELECT maybe_null_key FROM t2) FROM t1\G
     *************************** 1. row ***************************
                id: 1
       select_type: PRIMARY
             table: t1
     ...
     *************************** 2. row ***************************
                id: 2
       select_type: DEPENDENT SUBQUERY
             table: t2
              type: index_subquery
     possible_keys: maybe_null_key
               key: maybe_null_key
           key_len: 5
               ref: func
              rows: 2
             Extra: Using index

     mysql> SHOW WARNINGS\G
     *************************** 1. row ***************************
       Level: Note
        Code: 1003
     Message: select (`test`.`t1`.`outer_expr`,
              (((`test`.`t1`.`outer_expr`) in t2 on
              maybe_null_key checking NULL))) AS `outer_expr IN (SELECT
              maybe_null_key FROM t2)` from `test`.`t1`

The additional `OR ... IS NULL' condition makes query execution
slightly more complicated (and some optimizations within the subquery
become inapplicable), but generally this is tolerable.

The situation is much worse when OUTER_EXPR can be `NULL'. According to
the SQL interpretation of `NULL' as `unknown value,' `NULL IN (SELECT
INNER_EXPR ...)' should evaluate to:

   * `NULL', if the *Note `SELECT': select. produces any rows

   * `FALSE', if the *Note `SELECT': select. produces no rows

For proper evaluation, it is necessary to be able to check whether the
*Note `SELECT': select. has produced any rows at all, so `OUTER_EXPR =
INNER_EXPR' cannot be pushed down into the subquery. This is a problem,
because many real world subqueries become very slow unless the equality
can be pushed down.

Essentially, there must be different ways to execute the subquery
depending on the value of OUTER_EXPR.

The optimizer chooses SQL compliance over speed, so it accounts for the
possibility that OUTER_EXPR might be `NULL'.

If OUTER_EXPR is `NULL', to evaluate the following expression, it is
necessary to run the *Note `SELECT': select. to determine whether it
produces any rows:

     NULL IN (SELECT INNER_EXPR FROM ... WHERE SUBQUERY_WHERE)

It is necessary to run the original *Note `SELECT': select. here,
without any pushed-down equalities of the kind mentioned earlier.

On the other hand, when OUTER_EXPR is not `NULL', it is absolutely
essential that this comparison:

     OUTER_EXPR IN (SELECT INNER_EXPR FROM ... WHERE SUBQUERY_WHERE)

be converted to this expression that uses a pushed-down condition:

     EXISTS (SELECT 1 FROM ... WHERE SUBQUERY_WHERE AND OUTER_EXPR=INNER_EXPR)

Without this conversion, subqueries will be slow. To solve the dilemma
of whether to push down or not push down conditions into the subquery,
the conditions are wrapped in `trigger' functions. Thus, an expression
of the following form:

     OUTER_EXPR IN (SELECT INNER_EXPR FROM ... WHERE SUBQUERY_WHERE)

is converted into:

     EXISTS (SELECT 1 FROM ... WHERE SUBQUERY_WHERE
                               AND trigcond(OUTER_EXPR=INNER_EXPR))

More generally, if the subquery comparison is based on several pairs of
outer and inner expressions, the conversion takes this comparison:

     (OE_1, ..., OE_N) IN (SELECT IE_1, ..., IE_N FROM ... WHERE SUBQUERY_WHERE)

and converts it to this expression:

     EXISTS (SELECT 1 FROM ... WHERE SUBQUERY_WHERE
                               AND trigcond(OE_1=IE_1)
                               AND ...
                               AND trigcond(OE_N=IE_N)
            )

Each `trigcond(X)' is a special function that evaluates to the
following values:

   * X when the `linked' outer expression OE_I is not `NULL'

   * `TRUE' when the `linked' outer expression OE_I is `NULL'

Note that trigger functions are _not_ triggers of the kind that you
create with *Note `CREATE TRIGGER': create-trigger.

Equalities that are wrapped into `trigcond()' functions are not first
class predicates for the query optimizer. Most optimizations cannot
deal with predicates that may be turned on and off at query execution
time, so they assume any `trigcond(X)' to be an unknown function and
ignore it. At the moment, triggered equalities can be used by those
optimizations:

   * Reference optimizations: `trigcond(X=Y [OR Y IS NULL])' can be
     used to construct `ref', `eq_ref', or `ref_or_null' table accesses.

   * Index lookup-based subquery execution engines: `trigcond(X=Y)' can
     be used to construct `unique_subquery' or `index_subquery'
     accesses.

   * Table-condition generator: If the subquery is a join of several
     tables, the triggered condition will be checked as soon as
     possible.

When the optimizer uses a triggered condition to create some kind of
index lookup-based access (as for the first two items of the preceding
list), it must have a fallback strategy for the case when the condition
is turned off. This fallback strategy is always the same: Do a full
table scan. In *Note `EXPLAIN': explain. output, the fallback shows up
as `Full scan on NULL key' in the `Extra' column:

     mysql> EXPLAIN SELECT t1.col1,
         -> t1.col1 IN (SELECT t2.key1 FROM t2 WHERE t2.col2=t1.col2) FROM t1\G
     *************************** 1. row ***************************
                id: 1
       select_type: PRIMARY
             table: t1
             ...
     *************************** 2. row ***************************
                id: 2
       select_type: DEPENDENT SUBQUERY
             table: t2
              type: index_subquery
     possible_keys: key1
               key: key1
           key_len: 5
               ref: func
              rows: 2
             Extra: Using where; Full scan on NULL key

If you run *Note `EXPLAIN EXTENDED': explain-extended.  followed by
*Note `SHOW WARNINGS': show-warnings, you can see the triggered
condition:

     *************************** 1. row ***************************
       Level: Note
        Code: 1003
     Message: select `test`.`t1`.`col1` AS `col1`,
              <in_optimizer>(`test`.`t1`.`col1`,
              <exists>(<index_lookup>(<cache>(`test`.`t1`.`col1`) in t2
              on key1 checking NULL
              where (`test`.`t2`.`col2` = `test`.`t1`.`col2`) having
              trigcond(<is_not_null_test>(`test`.`t2`.`key1`))))) AS
              `t1.col1 IN (select t2.key1 from t2 where t2.col2=t1.col2)`
              from `test`.`t1`

The use of triggered conditions has some performance implications. A
`NULL IN (SELECT ...)' expression now may cause a full table scan
(which is slow) when it previously did not. This is the price paid for
correct results (the goal of the trigger-condition strategy was to
improve compliance and not speed).

For multiple-table subqueries, execution of `NULL IN (SELECT ...)' will
be particularly slow because the join optimizer does not optimize for
the case where the outer expression is `NULL'. It assumes that subquery
evaluations with `NULL' on the left side are very rare, even if there
are statistics that indicate otherwise. On the other hand, if the outer
expression might be `NULL' but never actually is, there is no
performance penalty.

To help the query optimizer better execute your queries, use these tips:

   * Declare a column as `NOT NULL' if it really is. (This also helps
     other aspects of the optimizer by simplifying condition testing
     for the column.)

   * If you do not need to distinguish a `NULL' from `FALSE' subquery
     result, you can easily avoid the slow execution path. Replace a
     comparison that looks like this:

          OUTER_EXPR IN (SELECT INNER_EXPR FROM ...)

     with this expression:

          (OUTER_EXPR IS NOT NULL) AND (OUTER_EXPR IN (SELECT INNER_EXPR FROM ...))

     Then `NULL IN (SELECT ...)' will never be evaluated because MySQL
     stops evaluating `AND' parts as soon as the expression result is
     clear.


File: manual.info,  Node: limit-optimization,  Next: how-to-avoid-table-scan,  Prev: subquery-optimization-with-exists,  Up: select-optimization

8.2.1.22 Optimizing `LIMIT' Queries
...................................

If you need only a specified number of rows from a result set, use a
`LIMIT' clause in the query, rather than fetching the whole result set
and throwing away the extra data.

MySQL sometimes optimizes a query that has a `LIMIT ROW_COUNT' clause
and no `HAVING' clause:

   * If you select only a few rows with `LIMIT', MySQL uses indexes in
     some cases when normally it would prefer to do a full table scan.

   * If you use `LIMIT ROW_COUNT' with `ORDER BY', MySQL ends the
     sorting as soon as it has found the first ROW_COUNT rows of the
     sorted result, rather than sorting the entire result. If ordering
     is done by using an index, this is very fast. If a filesort must
     be done, all rows that match the query without the `LIMIT' clause
     are selected, and most or all of them are sorted, before the first
     ROW_COUNT are found. After the initial rows have been found, MySQL
     does not sort any remainder of the result set.

   * When combining `LIMIT ROW_COUNT' with `DISTINCT', MySQL stops as
     soon as it finds ROW_COUNT unique rows.

   * In some cases, a `GROUP BY' can be resolved by reading the key in
     order (or doing a sort on the key) and then calculating summaries
     until the key value changes. In this case, `LIMIT ROW_COUNT' does
     not calculate any unnecessary `GROUP BY' values.

   * As soon as MySQL has sent the required number of rows to the
     client, it aborts the query unless you are using
     `SQL_CALC_FOUND_ROWS'.

   * `LIMIT 0' quickly returns an empty set.  This can be useful for
     checking the validity of a query.  When using one of the MySQL
     APIs, it can also be employed for obtaining the types of the
     result columns. (This trick does not work in the MySQL Monitor (the
     *Note `mysql': mysql. program), which merely displays `Empty set'
     in such cases; instead, use *Note `SHOW COLUMNS': show-columns. or
     *Note `DESCRIBE': describe. for this purpose.)

   * When the server uses temporary tables to resolve the query, it
     uses the `LIMIT ROW_COUNT' clause to calculate how much space is
     required.


File: manual.info,  Node: how-to-avoid-table-scan,  Prev: limit-optimization,  Up: select-optimization

8.2.1.23 How to Avoid Full Table Scans
......................................

Frequently, a full table scan is a danger sign that a query can be
speeded up significantly. For tables with more than a few rows, consider
redesigning the query by adding an index for one or more of the columns
tested in the `WHERE' clause. Put extra effort into avoiding table
scans for queries that perform joins or reference foreign keys. If the
nature of the data means there is no way to avoid reading all the rows,
then it might not be practical to make the query faster, or making it
faster might involve extensive restructuring of your tables that is
beyond the scope of this section.

The output from *Note `EXPLAIN': explain. shows `ALL' in the `type'
column when MySQL uses a table scan to resolve a query. This usually
happens under the following conditions:

   * The `ON' or `WHERE' clauses do not reference any indexed columns
     that the query can use. Consider adding an index, or refining those
     clauses to refer to an indexed column.

   * The table is so small that it is faster to perform a table scan
     than to bother with a key lookup. This is common for tables with
     fewer than 10 rows and a short row length.  Don't worry in this
     case.

   * You are comparing indexed columns with constant values and MySQL
     has calculated (based on the index tree) that the constants cover
     too large a part of the table and that a table scan would be
     faster. See *Note where-optimizations::. For example, to query
     census data only for males or only for females, MySQL must read
     most of the data blocks in the table, so locating the rows through
     the index would add unnecessary overhead. Don't worry if you
     encounter this condition for occasional big reports. If these
     reports are frequent or truly time-critical, and the table is
     huge, you might partition, shard, or create dimension tables using
     the relevant column.

   * You are using a key with low cardinality (many rows match the key
     value) through another column. In this case, MySQL assumes that by
     using the key it probably will do many key lookups and that a
     table scan would be faster.

For small tables, a table scan often is appropriate and the performance
impact is negligible. For large tables, try the following techniques to
avoid having the optimizer incorrectly choose a table scan:

   * Minimize the `OR' keywords in your `WHERE' clauses. If there is no
     index that helps to locate the values on _both_ sides of the `OR',
     any row could potentially be part of the result set, so all rows
     must be tested, and that requires a full table scan. If you have
     one index that helps to optimize one side of an `OR' query, and a
     different index that helps to optimize the other side, use a
     `UNION' operator to run separate fast queries and merge the
     results afterward.

   * With tables that use the `MEMORY' storage engine, if you run
     queries that examine ranges of values (using operators such as `>',
     `<=', or `BETWEEN' on the indexed columns), create the index with
     the `USING BTREE' clause. The default (`USING HASH') is fast for
     retrieving individual rows with an equality operator (`=' or
     `<=>'), but is much slower (requiring a full table scan) to
     examine a range of column values. A `MEMORY' table created with the
     `USING BTREE' clause is still fast for equality comparisons, so
     use that clause for your `MEMORY' tables that handle a variety of
     queries.

   * Use `ANALYZE TABLE TBL_NAME' to update the key distributions for
     the scanned table. See *Note analyze-table::.

   * Use `FORCE INDEX' for the scanned table to tell MySQL that table
     scans are very expensive compared to using the given index:

          SELECT * FROM t1, t2 FORCE INDEX (INDEX_FOR_COLUMN)
            WHERE t1.COL_NAME=t2.COL_NAME;

     See *Note index-hints::.

   * Start *Note `mysqld': mysqld. with the `--max-seeks-for-key=1000'
     option or use `SET max_seeks_for_key=1000' to tell the optimizer to
     assume that no key scan causes more than 1,000 key seeks.  See
     *Note server-system-variables::.


File: manual.info,  Node: non-select-optimization,  Next: permission-optimization,  Prev: select-optimization,  Up: statement-optimization

8.2.2 Optimizing DML Statements
-------------------------------

* Menu:

* insert-speed::                 Speed of `INSERT' Statements
* update-speed::                 Speed of `UPDATE' Statements
* delete-speed::                 Speed of `DELETE' Statements

This section explains how to speed up the data manipulation language
(DML) statements, *Note `INSERT': insert, *Note `UPDATE': update, and
*Note `DELETE': delete. Traditional OLTP applications and modern web
applications typically do many small DML operations, where concurrency
is vital. Data analysis and reporting applications typically run DML
operations that affect many rows at once, where the main considerations
is the I/O to write large amounts of data and keep indexes up-to-date.
For inserting and updating large volumes of data (known in the industry
as ETL, for `extract-transform-load'), sometimes you use other SQL
statements or external commands, that mimic the effects of *Note
`INSERT': insert, *Note `UPDATE': update, and *Note `DELETE': delete.
statements.


File: manual.info,  Node: insert-speed,  Next: update-speed,  Prev: non-select-optimization,  Up: non-select-optimization

8.2.2.1 Speed of `INSERT' Statements
....................................

To optimize insert speed, combine many small operations into a single
large operation. Ideally, you make a single connection, send the data
for many new rows at once, and delay all index updates and consistency
checking until the very end.

The time required for inserting a row is determined by the following
factors, where the numbers indicate approximate proportions:

   * Connecting: (3)

   * Sending query to server: (2)

   * Parsing query: (2)

   * Inserting row: (1 x size of row)

   * Inserting indexes: (1 x number of indexes)

   * Closing: (1)

This does not take into consideration the initial overhead to open
tables, which is done once for each concurrently running query.

The size of the table slows down the insertion of indexes by log N,
assuming B-tree indexes.

You can use the following methods to speed up inserts:

   * If you are inserting many rows from the same client at the same
     time, use *Note `INSERT': insert.  statements with multiple
     `VALUES' lists to insert several rows at a time. This is
     considerably faster (many times faster in some cases) than using
     separate single-row *Note `INSERT': insert.  statements. If you
     are adding data to a nonempty table, you can tune the
     `bulk_insert_buffer_size' variable to make data insertion even
     faster. See *Note server-system-variables::.

   * When loading a table from a text file, use *Note `LOAD DATA
     INFILE': load-data. This is usually 20 times faster than using
     *Note `INSERT': insert. statements.  See *Note load-data::.

   * Take advantage of the fact that columns have default values.
     Insert values explicitly only when the value to be inserted
     differs from the default. This reduces the parsing that MySQL must
     do and improves the insert speed.

   * See *Note optimizing-innodb-bulk-data-loading:: for tips specific
     to `InnoDB' tables.

   * See *Note optimizing-myisam-bulk-data-loading:: for tips specific
     to `MyISAM' tables.


File: manual.info,  Node: update-speed,  Next: delete-speed,  Prev: insert-speed,  Up: non-select-optimization

8.2.2.2 Speed of `UPDATE' Statements
....................................

An update statement is optimized like a *Note `SELECT': select. query
with the additional overhead of a write. The speed of the write depends
on the amount of data being updated and the number of indexes that are
updated. Indexes that are not changed do not get updated.

Another way to get fast updates is to delay updates and then do many
updates in a row later. Performing multiple updates together is much
quicker than doing one at a time if you lock the table.

For a `MyISAM' table that uses dynamic row format, updating a row to a
longer total length may split the row. If you do this often, it is very
important to use *Note `OPTIMIZE TABLE': optimize-table. occasionally.
See *Note optimize-table::.


File: manual.info,  Node: delete-speed,  Prev: update-speed,  Up: non-select-optimization

8.2.2.3 Speed of `DELETE' Statements
....................................

The time required to delete individual rows in a `MyISAM' table is
exactly proportional to the number of indexes. To delete rows more
quickly, you can increase the size of the key cache by increasing the
`key_buffer_size' system variable. See *Note server-parameters::.

To delete all rows from a `MyISAM' table, `TRUNCATE TABLE TBL_NAME' is
faster than than `DELETE FROM TBL_NAME'. Truncate operations are not
transaction-safe; an error occurs when attempting one in the course of
an active transaction or active table lock. See *Note truncate-table::.


File: manual.info,  Node: permission-optimization,  Next: information-schema-optimization,  Prev: non-select-optimization,  Up: statement-optimization

8.2.3 Optimizing Database Privileges
------------------------------------

The more complex your privilege setup, the more overhead applies to all
SQL statements. Simplifying the privileges established by *Note
`GRANT': grant. statements enables MySQL to reduce permission-checking
overhead when clients execute statements. For example, if you do not
grant any table-level or column-level privileges, the server need not
ever check the contents of the `tables_priv' and `columns_priv' tables.
Similarly, if you place no resource limits on any accounts, the server
does not have to perform resource counting. If you have a very high
statement-processing load, consider using a simplified grant structure
to reduce permission-checking overhead.


File: manual.info,  Node: information-schema-optimization,  Next: miscellaneous-optimization-tips,  Prev: permission-optimization,  Up: statement-optimization

8.2.4 Optimizing `INFORMATION_SCHEMA' Queries
---------------------------------------------

Applications that monitor the database can make frequent use of the
`INFORMATION_SCHEMA' tables. Certain types of queries for
`INFORMATION_SCHEMA' tables can be optimized to execute more quickly.
The goal is to minimize file operations (for example, scanning a
directory or opening a table file) to collect the information that
makes up these dynamic tables. These optimizations do have an effect on
how collations are used for searches in `INFORMATION_SCHEMA' tables.
For more information, see *Note charset-collation-information-schema::.

*1) Try to use constant lookup values for database and table names in
the `WHERE' clause*

You can take advantage of this principle as follows:

   * To look up databases or tables, use expressions that evaluate to a
     constant, such as literal values, functions that return a
     constant, or scalar subqueries.

   * Avoid queries that use a nonconstant database name lookup value
     (or no lookup value) because they require a scan of the data
     directory to find matching database directory names.

   * Within a database, avoid queries that use a nonconstant table name
     lookup value (or no lookup value) because they require a scan of
     the database directory to find matching table files.

This principle applies to the `INFORMATION_SCHEMA' tables shown in the
following table, which shows the columns for which a constant lookup
value enables the server to avoid a directory scan. For example, if you
are selecting from *Note `TABLES': tables-table, using a constant lookup
value for `TABLE_SCHEMA' in the `WHERE' clause enables a data directory
scan to be avoided.

This table lists `INFORMATION_SCHEMA' tables and table columns for
which a constant lookup value enables the server to avoid directory
scans.

Table                    Column to specify to     Column to specify to
                         avoid data directory     avoid database
                         scan                     directory scan
*Note `COLUMNS':         `TABLE_SCHEMA'           `TABLE_NAME'
columns-table.                                    
*Note                    `TABLE_SCHEMA'           `TABLE_NAME'
`KEY_COLUMN_USAGE':                               
key-column-usage-table.                           
*Note `PARTITIONS':      `TABLE_SCHEMA'           `TABLE_NAME'
partitions-table.                                 
*Note                    `CONSTRAINT_SCHEMA'      `TABLE_NAME'
`REFERENTIAL_CONSTRAINTS':                         
referential-constraints-table.                         
*Note `STATISTICS':      `TABLE_SCHEMA'           `TABLE_NAME'
statistics-table.                                 
*Note `TABLES':          `TABLE_SCHEMA'           `TABLE_NAME'
tables-table.                                     
*Note                    `TABLE_SCHEMA'           `TABLE_NAME'
`TABLE_CONSTRAINTS':                              
table-constraints-table.                          
*Note `TRIGGERS':        `EVENT_OBJECT_SCHEMA'    `EVENT_OBJECT_TABLE'
triggers-table.                                   
*Note `VIEWS':           `TABLE_SCHEMA'           `TABLE_NAME'
views-table.                                      

The benefit of a query that is limited to a specific constant database
name is that checks need be made only for the named database directory.
Example:

     SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES
     WHERE TABLE_SCHEMA = 'test';

Use of the literal database name `test' enables the server to check
only the `test' database directory, regardless of how many databases
there might be. By contrast, the following query is less efficient
because it requires a scan of the data directory to determine which
database names match the pattern `'test%'':

     SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES
     WHERE TABLE_SCHEMA LIKE 'test%';

For a query that is limited to a specific constant table name, checks
need be made only for the named table within the corresponding database
directory. Example:

     SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES
     WHERE TABLE_SCHEMA = 'test' AND TABLE_NAME = 't1';

Use of the literal table name `t1' enables the server to check only the
files for the `t1' table, regardless of how many tables there might be
in the `test' database. By contrast, the following query requires a
scan of the `test' database directory to determine which table names
match the pattern `'t%'':

     SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES
     WHERE TABLE_SCHEMA = 'test' AND TABLE_NAME LIKE 't%';

The following query requires a scan of the database directory to
determine matching database names for the pattern `'test%'', and for
each matching database, it requires a scan of the database directory to
determine matching table names for the pattern `'t%'':

     SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES
     WHERE TABLE_SCHEMA = 'test%' AND TABLE_NAME LIKE 't%';

*2) Write queries that minimize the number of table files that must be
opened*

For queries that refer to certain `INFORMATION_SCHEMA' table columns,
several optimizations are available that minimize the number of table
files that must be opened. Example:

     SELECT TABLE_NAME, ENGINE FROM INFORMATION_SCHEMA.TABLES
     WHERE TABLE_SCHEMA = 'test';

In this case, after the server has scanned the database directory to
determine the names of the tables in the database, those names become
available with no further file system lookups. Thus, `TABLE_NAME'
requires no files to be opened. The `ENGINE' (storage engine) value can
be determined by opening the table's `.frm' file, without touching
other table files such as the `.MYD' or `.MYI' file.

Some values, such as `INDEX_LENGTH' for `MyISAM' tables, require
opening the `.MYD' or `.MYI' file as well.

The file-opening optimization types are denoted thus:

   * `SKIP_OPEN_TABLE': Table files do not need to be opened. The
     information has already become available within the query by
     scanning the database directory.

   * `OPEN_FRM_ONLY': Only the table's `.frm' file need be opened.

   * `OPEN_TRIGGER_ONLY': Only the table's `.TRG' file need be opened.

   * `OPEN_FULL_TABLE': The unoptimized information lookup. The `.frm',
     `.MYD', and `.MYI' files must be opened.

The following list indicates how the preceding optimization types apply
to `INFORMATION_SCHEMA' table columns. For tables and columns not
named, none of the optimizations apply.

   * *Note `COLUMNS': columns-table.: `OPEN_FRM_ONLY' applies to all
     columns

   * *Note `KEY_COLUMN_USAGE': key-column-usage-table.:
     `OPEN_FULL_TABLE' applies to all columns

   * *Note `PARTITIONS': partitions-table.: `OPEN_FULL_TABLE' applies
     to all columns

   * *Note `REFERENTIAL_CONSTRAINTS': referential-constraints-table.:
     `OPEN_FULL_TABLE' applies to all columns

   * *Note `STATISTICS': statistics-table.:

     This table shows optimization types that apply to
     `INFORMATION_SCHEMA' *Note `STATISTICS': statistics-table. table
     columns.

     Column                             Optimization type
     `TABLE_CATALOG'                    `OPEN_FRM_ONLY'
     `TABLE_SCHEMA'                     `OPEN_FRM_ONLY'
     `TABLE_NAME'                       `OPEN_FRM_ONLY'
     `NON_UNIQUE'                       `OPEN_FRM_ONLY'
     `INDEX_SCHEMA'                     `OPEN_FRM_ONLY'
     `INDEX_NAME'                       `OPEN_FRM_ONLY'
     `SEQ_IN_INDEX'                     `OPEN_FRM_ONLY'
     `COLUMN_NAME'                      `OPEN_FRM_ONLY'
     `COLLATION'                        `OPEN_FRM_ONLY'
     `CARDINALITY'                      `OPEN_FULL_TABLE'
     `SUB_PART'                         `OPEN_FRM_ONLY'
     `PACKED'                           `OPEN_FRM_ONLY'
     `NULLABLE'                         `OPEN_FRM_ONLY'
     `INDEX_TYPE'                       `OPEN_FULL_TABLE'
     `COMMENT'                          `OPEN_FRM_ONLY'

   * *Note `TABLES': tables-table.:

     This table shows optimization types that apply to
     `INFORMATION_SCHEMA' *Note `TABLES': tables-table. table columns.

     Column                             Optimization type
     `TABLE_CATALOG'                    `SKIP_OPEN_TABLE'
     `TABLE_SCHEMA'                     `SKIP_OPEN_TABLE'
     `TABLE_NAME'                       `SKIP_OPEN_TABLE'
     `TABLE_TYPE'                       `OPEN_FRM_ONLY'
     `ENGINE'                           `OPEN_FRM_ONLY'
     `VERSION'                          `OPEN_FRM_ONLY'
     `ROW_FORMAT'                       `OPEN_FULL_TABLE'
     `TABLE_ROWS'                       `OPEN_FULL_TABLE'
     `AVG_ROW_LENGTH'                   `OPEN_FULL_TABLE'
     `DATA_LENGTH'                      `OPEN_FULL_TABLE'
     `MAX_DATA_LENGTH'                  `OPEN_FULL_TABLE'
     `INDEX_LENGTH'                     `OPEN_FULL_TABLE'
     `DATA_FREE'                        `OPEN_FULL_TABLE'
     `AUTO_INCREMENT'                   `OPEN_FULL_TABLE'
     `CREATE_TIME'                      `OPEN_FULL_TABLE'
     `UPDATE_TIME'                      `OPEN_FULL_TABLE'
     `CHECK_TIME'                       `OPEN_FULL_TABLE'
     `TABLE_COLLATION'                  `OPEN_FRM_ONLY'
     `CHECKSUM'                         `OPEN_FULL_TABLE'
     `CREATE_OPTIONS'                   `OPEN_FRM_ONLY'
     `TABLE_COMMENT'                    `OPEN_FRM_ONLY'

   * *Note `TABLE_CONSTRAINTS': table-constraints-table.:
     `OPEN_FULL_TABLE' applies to all columns

   * *Note `TRIGGERS': triggers-table.: `OPEN_TRIGGER_ONLY' applies to
     all columns

   * *Note `VIEWS': views-table.:

     This table shows optimization types that apply to
     `INFORMATION_SCHEMA' *Note `VIEWS': views-table. table columns.

     Column                             Optimization type
     `TABLE_CATALOG'                    `OPEN_FRM_ONLY'
     `TABLE_SCHEMA'                     `OPEN_FRM_ONLY'
     `TABLE_NAME'                       `OPEN_FRM_ONLY'
     `VIEW_DEFINITION'                  `OPEN_FRM_ONLY'
     `CHECK_OPTION'                     `OPEN_FRM_ONLY'
     `IS_UPDATABLE'                     `OPEN_FULL_TABLE'
     `DEFINER'                          `OPEN_FRM_ONLY'
     `SECURITY_TYPE'                    `OPEN_FRM_ONLY'
     `CHARACTER_SET_CLIENT'             `OPEN_FRM_ONLY'
     `COLLATION_CONNECTION'             `OPEN_FRM_ONLY'

*3) Use *Note `EXPLAIN': explain. to determine whether the server can
use `INFORMATION_SCHEMA' optimizations for a query*

This applies particularly for `INFORMATION_SCHEMA' queries that search
for information from more than one database, which might take a long
time and impact performance. The `Extra' value in *Note `EXPLAIN':
explain. output indicates which, if any, of the optimizations described
earlier the server can use to evaluate `INFORMATION_SCHEMA' queries.
The following examples demonstrate the kinds of information you can
expect to see in the `Extra' value.

     mysql> EXPLAIN SELECT TABLE_NAME FROM INFORMATION_SCHEMA.VIEWS WHERE
         -> TABLE_SCHEMA = 'test' AND TABLE_NAME = 'v1'\G
     *************************** 1. row ***************************
                id: 1
       select_type: SIMPLE
             table: VIEWS
              type: ALL
     possible_keys: NULL
               key: TABLE_SCHEMA,TABLE_NAME
           key_len: NULL
               ref: NULL
              rows: NULL
             Extra: Using where; Open_frm_only; Scanned 0 databases

Use of constant database and table lookup values enables the server to
avoid directory scans. For references to `VIEWS.TABLE_NAME', only the
`.frm' file need be opened.

     mysql> EXPLAIN SELECT TABLE_NAME, ROW_FORMAT FROM INFORMATION_SCHEMA.TABLES\G
     *************************** 1. row ***************************
                id: 1
       select_type: SIMPLE
             table: TABLES
              type: ALL
     possible_keys: NULL
               key: NULL
           key_len: NULL
               ref: NULL
              rows: NULL
             Extra: Open_full_table; Scanned all databases

No lookup values are provided (there is no `WHERE' clause), so the
server must scan the data directory and each database directory. For
each table thus identified, the table name and row format are selected.
`TABLE_NAME' requires no further table files to be opened (the
`SKIP_OPEN_TABLE' optimization applies). `ROW_FORMAT' requires all
table files to be opened (`OPEN_FULL_TABLE' applies).  *Note `EXPLAIN':
explain. reports `OPEN_FULL_TABLE' because it is more expensive than
`SKIP_OPEN_TABLE'.

     mysql> EXPLAIN SELECT TABLE_NAME, TABLE_TYPE FROM INFORMATION_SCHEMA.TABLES
         -> WHERE TABLE_SCHEMA = 'test'\G
     *************************** 1. row ***************************
                id: 1
       select_type: SIMPLE
             table: TABLES
              type: ALL
     possible_keys: NULL
               key: TABLE_SCHEMA
           key_len: NULL
               ref: NULL
              rows: NULL
             Extra: Using where; Open_frm_only; Scanned 1 database

No table name lookup value is provided, so the server must scan the
`test' database directory. For the `TABLE_NAME' and `TABLE_TYPE'
columns, the `SKIP_OPEN_TABLE' and `OPEN_FRM_ONLY' optimizations apply,
respectively. *Note `EXPLAIN': explain. reports `OPEN_FRM_ONLY' because
it is more expensive.

     mysql> EXPLAIN SELECT B.TABLE_NAME
         -> FROM INFORMATION_SCHEMA.TABLES AS A, INFORMATION_SCHEMA.COLUMNS AS B
         -> WHERE A.TABLE_SCHEMA = 'test'
         -> AND A.TABLE_NAME = 't1'
         -> AND B.TABLE_NAME = A.TABLE_NAME\G
     *************************** 1. row ***************************
                id: 1
       select_type: SIMPLE
             table: A
              type: ALL
     possible_keys: NULL
               key: TABLE_SCHEMA,TABLE_NAME
           key_len: NULL
               ref: NULL
              rows: NULL
             Extra: Using where; Skip_open_table; Scanned 0 databases
     *************************** 2. row ***************************
                id: 1
       select_type: SIMPLE
             table: B
              type: ALL
     possible_keys: NULL
               key: NULL
           key_len: NULL
               ref: NULL
              rows: NULL
             Extra: Using where; Open_frm_only; Scanned all databases;
                    Using join buffer

For the first *Note `EXPLAIN': explain. output row: Constant database
and table lookup values enable the server to avoid directory scans for
`TABLES' values.  References to `TABLES.TABLE_NAME' require no further
table files.

For the second *Note `EXPLAIN': explain. output row: All *Note
`COLUMNS': columns-table. table values are `OPEN_FRM_ONLY' lookups, so
`COLUMNS.TABLE_NAME' requires the `.frm' file to be opened.

     mysql> EXPLAIN SELECT * FROM INFORMATION_SCHEMA.COLLATIONS\G
     *************************** 1. row ***************************
                id: 1
       select_type: SIMPLE
             table: COLLATIONS
              type: ALL
     possible_keys: NULL
               key: NULL
           key_len: NULL
               ref: NULL
              rows: NULL
             Extra:

In this case, no optimizations apply because *Note `COLLATIONS':
collations-table. is not one of the `INFORMATION_SCHEMA' tables for
which optimizations are available.


File: manual.info,  Node: miscellaneous-optimization-tips,  Prev: information-schema-optimization,  Up: statement-optimization

8.2.5 Other Optimization Tips
-----------------------------

This section lists a number of miscellaneous tips for improving query
processing speed:

   * If your application makes several database requests to perform
     related updates, combining the statements into a stored routine
     can help performance. Similarly, if your application computes a
     single result based on several column values or large volumes of
     data, combining the computation into a UDF (user-defined function)
     can help performance. The resulting fast database operations are
     then available to be reused by other queries, applications, and
     even code written in different programming languages. See *Note
     stored-routines:: and *Note adding-functions:: for more
     information.

   * To fix any compression issues that occur with `ARCHIVE' tables, use
     *Note `OPTIMIZE TABLE': optimize-table. See *Note
     archive-storage-engine::.

   * If possible, classify reports as `live' or as `statistical', where
     data needed for statistical reports is created only from summary
     tables that are generated periodically from the live data.

   * If you have data that does not conform well to a rows-and-columns
     table structure, you can pack and store data into a *Note `BLOB':
     blob. column. In this case, you must provide code in your
     application to pack and unpack information, but this might save
     I/O operations to read and write the sets of related values.

   * With Web servers, store images and other binary assets as files,
     with the path name stored in the database rather than the file
     itself. Most Web servers are better at caching files than database
     contents, so using files is generally faster. (Although you must
     handle backups and storage issues yourself in this case.)

   * If you need really high speed, look at the low-level MySQL
     interfaces. For example, by accessing the MySQL `InnoDB' or
     `MyISAM' storage engine directly, you could get a substantial speed
     increase compared to using the SQL interface.

   * Replication can provide a performance benefit for some operations.
     You can distribute client retrievals among replication servers to
     split up the load. To avoid slowing down the master while making
     backups, you can make backups using a slave server. See *Note
     replication::.


File: manual.info,  Node: optimization-indexes,  Next: optimizing-database-structure,  Prev: statement-optimization,  Up: optimization

8.3 Optimization and Indexes
============================

* Menu:

* mysql-indexes::                How MySQL Uses Indexes
* optimizing-primary-keys::      Using Primary Keys
* optimizing-foreign-keys::      Using Foreign Keys
* column-indexes::               Column Indexes
* multiple-column-indexes::      Multiple-Column Indexes
* verifying-index-usage::        Verifying Index Usage
* myisam-index-statistics::      `InnoDB' and `MyISAM' Index Statistics Collection
* index-btree-hash::             Comparison of B-Tree and Hash Indexes

The best way to improve the performance of *Note `SELECT': select.
operations is to create indexes on one or more of the columns that are
tested in the query. The index entries act like pointers to the table
rows, allowing the query to quickly determine which rows match a
condition in the `WHERE' clause, and retrieve the other column values
for those rows. All MySQL data types can be indexed.

Although it can be tempting to create an indexes for every possible
column used in a query, unnecessary indexes waste space and waste time
for MySQL to determine which indexes to use. You must find the right
balance to achieve fast queries using the optimal set of indexes.


File: manual.info,  Node: mysql-indexes,  Next: optimizing-primary-keys,  Prev: optimization-indexes,  Up: optimization-indexes

8.3.1 How MySQL Uses Indexes
----------------------------

Indexes are used to find rows with specific column values quickly.
Without an index, MySQL must begin with the first row and then read
through the entire table to find the relevant rows. The larger the
table, the more this costs. If the table has an index for the columns
in question, MySQL can quickly determine the position to seek to in the
middle of the data file without having to look at all the data. If a
table has 1,000 rows, this is at least 100 times faster than reading
sequentially.

Most MySQL indexes (`PRIMARY KEY', `UNIQUE', `INDEX', and `FULLTEXT')
are stored in B-trees. Exceptions are that indexes on spatial data
types use R-trees, and that `MEMORY' tables also support hash indexes.

In general, indexes are used as described in the following discussion.
Characteristics specific to hash indexes (as used in `MEMORY' tables)
are described at the end of this section.

MySQL uses indexes for these operations:

   * To find the rows matching a `WHERE' clause quickly.

   * To eliminate rows from consideration. If there is a choice between
     multiple indexes, MySQL normally uses the index that finds the
     smallest number of rows (the most selective index).

   * To retrieve rows from other tables when performing joins.  MySQL
     can use indexes on columns more efficiently if they are declared
     as the same type and size. In this context, *Note `VARCHAR': char.
     and *Note `CHAR': char. are considered the same if they are
     declared as the same size. For example, `VARCHAR(10)' and
     `CHAR(10)' are the same size, but `VARCHAR(10)' and `CHAR(15)' are
     not.

     Comparison of dissimilar columns may prevent use of indexes if
     values cannot be compared directly without conversion.  Suppose
     that a numeric column is compared to a string column. For a given
     value such as `1' in the numeric column, it might compare equal to
     any number of values in the string column such as `'1'', `' 1'',
     `'00001'', or `'01.e1''. This rules out use of any indexes for the
     string column.

   * To find the `MIN()' or `MAX()' value for a specific indexed column
     KEY_COL. This is optimized by a preprocessor that checks whether
     you are using `WHERE KEY_PART_N = CONSTANT' on all key parts that
     occur before KEY_COL in the index. In this case, MySQL does a
     single key lookup for each `MIN()' or `MAX()' expression and
     replaces it with a constant. If all expressions are replaced with
     constants, the query returns at once. For example:

          SELECT MIN(KEY_PART2),MAX(KEY_PART2)
            FROM TBL_NAME WHERE KEY_PART1=10;

   * To sort or group a table if the sorting or grouping is done on a
     leftmost prefix of a usable key (for example, `ORDER BY KEY_PART1,
     KEY_PART2'). If all key parts are followed by `DESC', the key is
     read in reverse order. See *Note order-by-optimization::, and
     *Note group-by-optimization::.

   * In some cases, a query can be optimized to retrieve values without
     consulting the data rows. (An index that provides all the
     necessary results for a query is called a covering index.)  If a
     query uses only columns from a table that are numeric and that
     form a leftmost prefix for some key, the selected values can be
     retrieved from the index tree for greater speed:

          SELECT KEY_PART3 FROM TBL_NAME
            WHERE KEY_PART1=1

Indexes are less important for queries on small tables, or big tables
where report queries process most or all of the rows.  When a query
needs to access most of the rows, reading sequentially is faster than
working through an index. Sequential reads minimize disk seeks, even if
not all the rows are needed for the query. See *Note
how-to-avoid-table-scan:: for details.


File: manual.info,  Node: optimizing-primary-keys,  Next: optimizing-foreign-keys,  Prev: mysql-indexes,  Up: optimization-indexes

8.3.2 Using Primary Keys
------------------------

The primary key for a table represents the column or set of columns
that you use in your most vital queries. It has an associated index,
for fast query performance. Query performance benefits from the `NOT
NULL' optimization, because it cannot include any `NULL' values.  With
the `InnoDB' storage engine, the table data is physically organized to
do ultra-fast lookups and sorts based on the primary key column or
columns.

If your table is big and important, but does not have an obvious column
or set of columns to use as a primary key, you might create a separate
column with auto-increment values to use as the primary key. These
unique IDs can serve as pointers to corresponding rows in other tables
when you join tables using foreign keys.


File: manual.info,  Node: optimizing-foreign-keys,  Next: column-indexes,  Prev: optimizing-primary-keys,  Up: optimization-indexes

8.3.3 Using Foreign Keys
------------------------

If a table has many columns, and you query many different combinations
of columns, it might be efficient to split the less-frequently used
data into separate tables with a few columns each, and relate them back
to the main table by duplicating the numeric ID column from the main
table. That way, each small table can have a primary key for fast
lookups of its data, and you can query just the set of columns that you
need using a join operation. Depending on how the data is distributed,
the queries might perform less I/O and take up less cache memory
because the relevant columns are packed together on disk. (To maximize
performance, queries try to read as few data blocks as possible from
disk; tables with only a few columns can fit more rows in each data
block.)


File: manual.info,  Node: column-indexes,  Next: multiple-column-indexes,  Prev: optimizing-foreign-keys,  Up: optimization-indexes

8.3.4 Column Indexes
--------------------

The most common type of index involves a single column, storing copies
of the values from that column in a data structure, allowing fast
lookups for the rows with the corresponding column values. The B-tree
data structure lets the index quickly find a specific value, a set of
values, or a range of values, corresponding to operators such as `=',
`>', `<=', `BETWEEN', `IN', and so on, in a `WHERE' clause.

The maximum number of indexes per table and the maximum index length is
defined per storage engine. See *Note storage-engines::. All storage
engines support at least 16 indexes per table and a total index length
of at least 256 bytes. Most storage engines have higher limits.

* Prefix Indexes *

With `COL_NAME(N)' syntax in an index specification, you can create an
index that uses only the first N characters of a string column.
Indexing only a prefix of column values in this way can make the index
file much smaller. When you index a *Note `BLOB': blob. or *Note
`TEXT': blob. column, you _must_ specify a prefix length for the index.
For example:

     CREATE TABLE test (blob_col BLOB, INDEX(blob_col(10)));

Prefixes can be up to 1000 bytes long (767 bytes for `InnoDB' tables,
unless you have `innodb_large_prefix' set).

*Note*:

Prefix limits are measured in bytes, while the prefix length in *Note
`CREATE TABLE': create-table. statements is interpreted as number of
characters. _Take this into account when specifying a prefix length for
a column that uses a multi-byte character set_.

* FULLTEXT Indexes *

You can also create `FULLTEXT' indexes. These are used for full-text
searches. Only the `MyISAM' storage engine supports `FULLTEXT' indexes
and only for *Note `CHAR': char, *Note `VARCHAR': char, and *Note
`TEXT': blob. columns. Indexing always takes place over the entire
column and column prefix indexing is not supported. For details, see
*Note fulltext-search::.

* Spatial Indexes *

You can also create indexes on spatial data types. Currently, only
`MyISAM' supports R-tree indexes on spatial types. Other storage
engines use B-trees for indexing spatial types (except for `ARCHIVE',
which does not support spatial type indexing).

* Indexes in the MEMORY Storage Engine *

The `MEMORY' storage engine uses `HASH' indexes by default, but also
supports `BTREE' indexes.


File: manual.info,  Node: multiple-column-indexes,  Next: verifying-index-usage,  Prev: column-indexes,  Up: optimization-indexes

8.3.5 Multiple-Column Indexes
-----------------------------

MySQL can create composite indexes (that is, indexes on multiple
columns). An index may consist of up to 16 columns. For certain data
types, you can index a prefix of the column (see *Note
column-indexes::).

MySQL can use multiple-column indexes for queries that test all the
columns in the index, or queries that test just the first column, the
first two columns, the first three columns, and so on. If you specify
the columns in the right order in the index definition, a single
composite index can speed up several kinds of queries on the same table.

A multiple-column index can be considered a sorted array, the rows of
which contain values that are created by concatenating the values of
the indexed columns.

*Note*:

As an alternative to a composite index, you can introduce a column that
is `hashed' based on information from other columns. If this column is
short, reasonably unique, and indexed, it might be faster than a `wide'
index on many columns. In MySQL, it is very easy to use this extra
column:

     SELECT * FROM TBL_NAME
       WHERE HASH_COL=MD5(CONCAT(VAL1,VAL2))
       AND COL1=VAL1 AND COL2=VAL2;

Suppose that a table has the following specification:

     CREATE TABLE test (
         id         INT NOT NULL,
         last_name  CHAR(30) NOT NULL,
         first_name CHAR(30) NOT NULL,
         PRIMARY KEY (id),
         INDEX name (last_name,first_name)
     );

The `name' index is an index over the `last_name' and `first_name'
columns. The index can be used for lookups in queries that specify
values in a known range for combinations of `last_name' and `first_name'
values. It can also be used for queries that specify just a `last_name'
value because that column is a leftmost prefix of the index (as
described later in this section). Therefore, the `name' index is used
for lookups in the following queries:

     SELECT * FROM test WHERE last_name='Widenius';

     SELECT * FROM test
       WHERE last_name='Widenius' AND first_name='Michael';

     SELECT * FROM test
       WHERE last_name='Widenius'
       AND (first_name='Michael' OR first_name='Monty');

     SELECT * FROM test
       WHERE last_name='Widenius'
       AND first_name >='M' AND first_name < 'N';

However, the `name' index is _not_ used for lookups in the following
queries:

     SELECT * FROM test WHERE first_name='Michael';

     SELECT * FROM test
       WHERE last_name='Widenius' OR first_name='Michael';

Suppose that you issue the following *Note `SELECT': select. statement:

     mysql> SELECT * FROM TBL_NAME WHERE col1=VAL1 AND col2=VAL2;

If a multiple-column index exists on `col1' and `col2', the appropriate
rows can be fetched directly. If separate single-column indexes exist on
`col1' and `col2', the optimizer attempts to use the Index Merge
optimization (see *Note index-merge-optimization::), or attempts to find
the most restrictive index by deciding which index excludes more rows
and using that index to fetch the rows.

If the table has a multiple-column index, any leftmost prefix of the
index can be used by the optimizer to find rows. For example, if you
have a three-column index on `(col1, col2, col3)', you have indexed
search capabilities on `(col1)', `(col1, col2)', and `(col1, col2,
col3)'.

MySQL cannot use the index to perform lookups if the columns do not
form a leftmost prefix of the index. Suppose that you have the *Note
`SELECT': select. statements shown here:

     SELECT * FROM TBL_NAME WHERE col1=VAL1;
     SELECT * FROM TBL_NAME WHERE col1=VAL1 AND col2=VAL2;

     SELECT * FROM TBL_NAME WHERE col2=VAL2;
     SELECT * FROM TBL_NAME WHERE col2=VAL2 AND col3=VAL3;

If an index exists on `(col1, col2, col3)', only the first two queries
use the index. The third and fourth queries do involve indexed columns,
but `(col2)' and `(col2, col3)' are not leftmost prefixes of `(col1,
col2, col3)'.


File: manual.info,  Node: verifying-index-usage,  Next: myisam-index-statistics,  Prev: multiple-column-indexes,  Up: optimization-indexes

8.3.6 Verifying Index Usage
---------------------------

Always check whether all your queries really use the indexes that you
have created in the tables. Use the *Note `EXPLAIN': explain.
statement, as described in *Note using-explain::.


File: manual.info,  Node: myisam-index-statistics,  Next: index-btree-hash,  Prev: verifying-index-usage,  Up: optimization-indexes

8.3.7 `InnoDB' and `MyISAM' Index Statistics Collection
-------------------------------------------------------

Storage engines collect statistics about tables for use by the
optimizer. Table statistics are based on value groups, where a value
group is a set of rows with the same key prefix value. For optimizer
purposes, an important statistic is the average value group size.

MySQL uses the average value group size in the following ways:

   * To estimate how may rows must be read for each `ref' access

   * To estimate how many row a partial join will produce; that is, the
     number of rows that an operation of this form will produce:

          (...) JOIN TBL_NAME ON TBL_NAME.KEY = EXPR

As the average value group size for an index increases, the index is
less useful for those two purposes because the average number of rows
per lookup increases: For the index to be good for optimization
purposes, it is best that each index value target a small number of
rows in the table. When a given index value yields a large number of
rows, the index is less useful and MySQL is less likely to use it.

The average value group size is related to table cardinality, which is
the number of value groups. The *Note `SHOW INDEX': show-index.
statement displays a cardinality value based on N/S, where N is the
number of rows in the table and S is the average value group size. That
ratio yields an approximate number of value groups in the table.

For a join based on the `<=>' comparison operator, `NULL' is not
treated differently from any other value: `NULL <=> NULL', just as `N
<=> N' for any other N.

However, for a join based on the `=' operator, `NULL' is different from
non-`NULL' values: `EXPR1 = EXPR2' is not true when EXPR1 or EXPR2 (or
both) are `NULL'. This affects `ref' accesses for comparisons of the
form `TBL_NAME.KEY = EXPR': MySQL will not access the table if the
current value of EXPR is `NULL', because the comparison cannot be true.

For `=' comparisons, it does not matter how many `NULL' values are in
the table. For optimization purposes, the relevant value is the average
size of the non-`NULL' value groups. However, MySQL does not currently
enable that average size to be collected or used.

For `InnoDB' and `MyISAM' tables, you have some control over collection
of table statistics by means of the `innodb_stats_method' and
`myisam_stats_method' system variables, respectively. These variables
have three possible values, which differ as follows:

   * When the variable is set to `nulls_equal', all `NULL' values are
     treated as identical (that is, they all form a single value group).

     If the `NULL' value group size is much higher than the average
     non-`NULL' value group size, this method skews the average value
     group size upward. This makes index appear to the optimizer to be
     less useful than it really is for joins that look for non-`NULL'
     values. Consequently, the `nulls_equal' method may cause the
     optimizer not to use the index for `ref' accesses when it should.

   * When the variable is set to `nulls_unequal', `NULL' values are not
     considered the same. Instead, each `NULL' value forms a separate
     value group of size 1.

     If you have many `NULL' values, this method skews the average
     value group size downward. If the average non-`NULL' value group
     size is large, counting `NULL' values each as a group of size 1
     causes the optimizer to overestimate the value of the index for
     joins that look for non-`NULL' values. Consequently, the
     `nulls_unequal' method may cause the optimizer to use this index
     for `ref' lookups when other methods may be better.

   * When the variable is set to `nulls_ignored', `NULL' values are
     ignored.

If you tend to use many joins that use `<=>' rather than `=', `NULL'
values are not special in comparisons and one `NULL' is equal to
another. In this case, `nulls_equal' is the appropriate statistics
method.

The `innodb_stats_method' system variable has a global value; the
`myisam_stats_method' system variable has both global and session
values. Setting the global value affects statistics collection for
tables from the corresponding storage engine. Setting the session value
affects statistics collection only for the current client connection.
This means that you can force a table's statistics to be regenerated
with a given method without affecting other clients by setting the
session value of `myisam_stats_method'.

To regenerate table statistics, you can use any of the following
methods:

   * Execute *Note `myisamchk --stats_method=METHOD_NAME --analyze':
     myisamchk.

   * Change the table to cause its statistics to go out of date (for
     example, insert a row and then delete it), and then set
     `myisam_stats_method' and issue an *Note `ANALYZE TABLE':
     analyze-table.  statement

Some caveats regarding the use of `innodb_stats_method' and
`myisam_stats_method':

   * You can force table statistics to be collected explicitly, as just
     described. However, MySQL may also collect statistics
     automatically. For example, if during the course of executing
     statements for a table, some of those statements modify the table,
     MySQL may collect statistics.  (This may occur for bulk inserts or
     deletes, or some *Note `ALTER TABLE': alter-table. statements, for
     example.) If this happens, the statistics are collected using
     whatever value `innodb_stats_method' or `myisam_stats_method' has
     at the time. Thus, if you collect statistics using one method, but
     the system variable is set to the other method when a table's
     statistics are collected automatically later, the other method
     will be used.

   * There is no way to tell which method was used to generate
     statistics for a given table.

   * These variables apply only to `InnoDB' and `MyISAM' tables. Other
     storage engines have only one method for collecting table
     statistics. Usually it is closer to the `nulls_equal' method.


File: manual.info,  Node: index-btree-hash,  Prev: myisam-index-statistics,  Up: optimization-indexes

8.3.8 Comparison of B-Tree and Hash Indexes
-------------------------------------------

Understanding the B-tree and hash data structures can help predict how
different queries perform on different storage engines that use these
data structures in their indexes, particularly for the `MEMORY' storage
engine that lets you choose B-tree or hash indexes.

* B-Tree Index Characteristics *

A B-tree index can be used for column comparisons in expressions that
use the `=', `>', `>=', `<', `<=', or `BETWEEN' operators. The index
also can be used for `LIKE' comparisons if the argument to `LIKE' is a
constant string that does not start with a wildcard character. For
example, the following *Note `SELECT': select. statements use indexes:

     SELECT * FROM TBL_NAME WHERE KEY_COL LIKE 'Patrick%';
     SELECT * FROM TBL_NAME WHERE KEY_COL LIKE 'Pat%_ck%';

In the first statement, only rows with `'Patrick' <= KEY_COL <
'Patricl'' are considered. In the second statement, only rows with
`'Pat' <= KEY_COL < 'Pau'' are considered.

The following *Note `SELECT': select. statements do not use indexes:

     SELECT * FROM TBL_NAME WHERE KEY_COL LIKE '%Patrick%';
     SELECT * FROM TBL_NAME WHERE KEY_COL LIKE OTHER_COL;

In the first statement, the `LIKE' value begins with a wildcard
character. In the second statement, the `LIKE' value is not a constant.

If you use `... LIKE '%STRING%'' and STRING is longer than three
characters, MySQL uses the _Turbo Boyer-Moore algorithm_ to initialize
the pattern for the string and then uses this pattern to perform the
search more quickly.

A search using `COL_NAME IS NULL' employs indexes if COL_NAME is
indexed.

Any index that does not span all `AND' levels in the `WHERE' clause is
not used to optimize the query. In other words, to be able to use an
index, a prefix of the index must be used in every `AND' group.

The following `WHERE' clauses use indexes:

     ... WHERE INDEX_PART1=1 AND INDEX_PART2=2 AND OTHER_COLUMN=3
         /* INDEX = 1 OR INDEX = 2 */
     ... WHERE INDEX=1 OR A=10 AND INDEX=2
         /* optimized like "INDEX_PART1='hello'" */
     ... WHERE INDEX_PART1='hello' AND INDEX_PART3=5
         /* Can use index on INDEX1 but not on INDEX2 or INDEX3 */
     ... WHERE INDEX1=1 AND INDEX2=2 OR INDEX1=3 AND INDEX3=3;

These `WHERE' clauses do _not_ use indexes:

         /* INDEX_PART1 is not used */
     ... WHERE INDEX_PART2=1 AND INDEX_PART3=2

         /*  Index is not used in both parts of the WHERE clause  */
     ... WHERE INDEX=1 OR A=10

         /* No index spans all rows  */
     ... WHERE INDEX_PART1=1 OR INDEX_PART2=10

Sometimes MySQL does not use an index, even if one is available.  One
circumstance under which this occurs is when the optimizer estimates
that using the index would require MySQL to access a very large
percentage of the rows in the table. (In this case, a table scan is
likely to be much faster because it requires fewer seeks.) However, if
such a query uses `LIMIT' to retrieve only some of the rows, MySQL uses
an index anyway, because it can much more quickly find the few rows to
return in the result.

* Hash Index Characteristics *

Hash indexes have somewhat different characteristics from those just
discussed:

   * They are used only for equality comparisons that use the `=' or
     `<=>' operators (but are _very_ fast). They are not used for
     comparison operators such as `<' that find a range of values.
     Systems that rely on this type of single-value lookup are known as
     `key-value stores'; to use MySQL for such applications, use hash
     indexes wherever possible.

   * The optimizer cannot use a hash index to speed up `ORDER BY'
     operations. (This type of index cannot be used to search for the
     next entry in order.)

   * MySQL cannot determine approximately how many rows there are
     between two values (this is used by the range optimizer to decide
     which index to use). This may affect some queries if you change a
     `MyISAM' table to a hash-indexed `MEMORY' table.

   * Only whole keys can be used to search for a row. (With a B-tree
     index, any leftmost prefix of the key can be used to find rows.)


File: manual.info,  Node: optimizing-database-structure,  Next: optimizing-innodb,  Prev: optimization-indexes,  Up: optimization

8.4 Optimizing Database Structure
=================================

* Menu:

* data-size::                    Optimizing Data Size
* optimize-data-types::          Optimizing MySQL Data Types
* optimize-multi-tables::        Optimizing for Many Tables

In your role as a database designer, look for the most efficient way to
organize your schemas, tables, and columns. As when tuning application
code, you minimize I/O, keep related items together, and plan ahead so
that performance stays high as the data volume increases. Starting with
an efficient database design makes it easier for team members to write
high-performing application code, and makes the database likely to
endure as applications evolve and are rewritten.


File: manual.info,  Node: data-size,  Next: optimize-data-types,  Prev: optimizing-database-structure,  Up: optimizing-database-structure

8.4.1 Optimizing Data Size
--------------------------

Design your tables to minimize their space on the disk. This can result
in huge improvements by reducing the amount of data written to and read
from disk. Smaller tables normally require less main memory while their
contents are being actively processed during query execution. Any space
reduction for table data also results in smaller indexes that can be
processed faster.

MySQL supports many different storage engines (table types) and row
formats. For each table, you can decide which storage and indexing
method to use. Choosing the proper table format for your application
can give you a big performance gain. See *Note storage-engines::.

You can get better performance for a table and minimize storage space
by using the techniques listed here:

* Table Columns *

   * Use the most efficient (smallest) data types possible. MySQL has
     many specialized types that save disk space and memory.  For
     example, use the smaller integer types if possible to get smaller
     tables. *Note `MEDIUMINT': integer-types.  is often a better
     choice than *Note `INT': integer-types. because a *Note
     `MEDIUMINT': integer-types. column uses 25% less space.

   * Declare columns to be `NOT NULL' if possible. It makes SQL
     operations faster, by enabling better use of indexes and
     eliminating overhead for testing whether each value is `NULL'. You
     also save some storage space, one bit per column. If you really
     need `NULL' values in your tables, use them.  Just avoid the
     default setting that allows `NULL' values in every column.

* Row Format *

   * `InnoDB' tables use a compact storage format. In versions of MySQL
     earlier than 5.0.3, `InnoDB' rows contain some redundant
     information, such as the number of columns and the length of each
     column, even for fixed-size columns. By default, tables are
     created in the compact format (`ROW_FORMAT=COMPACT'). If you wish
     to downgrade to older versions of MySQL, you can request the old
     format with `ROW_FORMAT=REDUNDANT'.

     The presence of the compact row format decreases row storage space
     by about 20% at the cost of increasing CPU use for some
     operations. If your workload is a typical one that is limited by
     cache hit rates and disk speed it is likely to be faster. If it is
     a rare case that is limited by CPU speed, it might be slower.

     The compact `InnoDB' format also changes how *Note `CHAR': char.
     columns containing UTF-8 data are stored. With
     `ROW_FORMAT=REDUNDANT', a UTF-8 `CHAR(N)' occupies 3 x N bytes,
     given that the maximum length of a UTF-8 encoded character is
     three bytes. Many languages can be written primarily using
     single-byte UTF-8 characters, so a fixed storage length often
     wastes space. With `ROW_FORMAT=COMPACT' format, `InnoDB' allocates
     a variable amount of storage in the range from N to 3 x N bytes
     for these columns by stripping trailing spaces if necessary. The
     minimum storage length is kept as N bytes to facilitate in-place
     updates in typical cases.

   * To minimize space even further by storing table data in compressed
     form, specify `ROW_FORMAT=COMPRESSED' when creating `InnoDB'
     tables, or run the *Note `myisampack': myisampack. command on an
     existing `MyISAM' table. (`InnoDB' tables compressed tables are
     readable and writable, while `MyISAM' compressed tables are
     read-only.)

   * For `MyISAM' tables, if you do not have any variable-length columns
     (*Note `VARCHAR': char, *Note `TEXT': blob, or *Note `BLOB': blob.
     columns), a fixed-size row format is used. This is faster but may
     waste some space.  See *Note myisam-table-formats::. You can hint
     that you want to have fixed length rows even if you have *Note
     `VARCHAR': char. columns with the *Note `CREATE TABLE':
     create-table. option `ROW_FORMAT=FIXED'.

* Indexes *

   * The primary index of a table should be as short as possible.  This
     makes identification of each row easy and efficient.  For `InnoDB'
     tables, the primary key columns are duplicated in each secondary
     index entry, so a short primary key saves considerable space if
     you have many secondary indexes.

   * Create only the indexes that you need to improve query
     performance. Indexes are good for retrieval, but slow down insert
     and update operations. If you access a table mostly by searching
     on a combination of columns, create a single composite index on
     them rather than a separate index for each column. The first part
     of the index should be the column most used. If you _always_ use
     many columns when selecting from the table, the first column in
     the index should be the one with the most duplicates, to obtain
     better compression of the index.

   * If it is very likely that a long string column has a unique prefix
     on the first number of characters, it is better to index only this
     prefix, using MySQL's support for creating an index on the
     leftmost part of the column (see *Note create-index::). Shorter
     indexes are faster, not only because they require less disk space,
     but because they also give you more hits in the index cache, and
     thus fewer disk seeks. See *Note server-parameters::.

* Joins *

   * In some circumstances, it can be beneficial to split into two a
     table that is scanned very often. This is especially true if it is
     a dynamic-format table and it is possible to use a smaller static
     format table that can be used to find the relevant rows when
     scanning the table.

   * Declare columns with identical information in different tables
     with identical data types, to speed up joins based on the
     corresponding columns.

   * Keep column names simple, so that you can use the same name across
     different tables and simplify join queries. For example, in a
     table named `customer', use a column name of `name' instead of
     `customer_name'. To make your names portable to other SQL servers,
     consider keeping them shorter than 18 characters.

* Normalization *

   * Normally, try to keep all data nonredundant (observing what is
     referred to in database theory as _third normal form_). Instead of
     repeating lengthy values such as names and addresses, assign them
     unique IDs, repeat these IDs as needed across multiple smaller
     tables, and join the tables in queries by referencing the IDs in
     the join clause.

   * If speed is more important than disk space and the maintenance
     costs of keeping multiple copies of data, for example in a
     business intelligence scenario where you analyze all the data from
     large tables, you can relax the normalization rules, duplicating
     information or creating summary tables to gain more speed.


File: manual.info,  Node: optimize-data-types,  Next: optimize-multi-tables,  Prev: data-size,  Up: optimizing-database-structure

8.4.2 Optimizing MySQL Data Types
---------------------------------

* Menu:

* optimize-numeric::             Optimizing for Numeric Data
* optimize-character::           Optimizing for Character and String Types
* optimize-blob::                Optimizing for BLOB Types
* procedure-analyse::            Using `PROCEDURE ANALYSE'


File: manual.info,  Node: optimize-numeric,  Next: optimize-character,  Prev: optimize-data-types,  Up: optimize-data-types

8.4.2.1 Optimizing for Numeric Data
...................................

   * For unique IDs or other values that can be represented as either
     strings or numbers, prefer numeric columns to string columns.
     Since large numeric values can be stored in fewer bytes than the
     corresponding strings, it is faster and takes less memory to
     transfer and compare them.

   * If you are using numeric data, it is faster in many cases to
     access information from a database (using a live connection) than
     to access a text file. Information in the database is likely to be
     stored in a more compact format than in the text file, so
     accessing it involves fewer disk accesses. You also save code in
     your application because you can avoid parsing the text file to
     find line and column boundaries.


File: manual.info,  Node: optimize-character,  Next: optimize-blob,  Prev: optimize-numeric,  Up: optimize-data-types

8.4.2.2 Optimizing for Character and String Types
.................................................

For character and string columns, follow these guidelines:

   * Use binary collation order for fast comparison and sort
     operations, when you do not need language-specific collation
     features. You can use the *Note BINARY: charset-binary-op. operator
     to use binary collation within a particular query.

   * When comparing values from different columns, declare those
     columns with the same character set and collation wherever
     possible, to avoid string conversions while running the query.

   * For column values less than 8KB in size, use binary `VARCHAR'
     instead of `BLOB'. The `GROUP BY' and `ORDER BY' clauses can
     generate temporary tables, and these temporary tables can use the
     `MEMORY' storage engine if the original table does not contain any
     `BLOB' columns.

   * If a table contains string columns such as name and address, but
     many queries do not retrieve those columns, consider splitting the
     string columns into a separate table and using join queries with a
     foreign key when necessary. When MySQL retrieves any value from a
     row, it reads a data block containing all the columns of that row
     (and possibly other adjacent rows). Keeping each row small, with
     only the most frequently used columns, allows more rows to fit in
     each data block. Such compact tables reduce disk I/O and memory
     usage for common queries.

   * When you use a randomly generated value as a primary key in an
     `InnoDB' table, prefix it with an ascending value such as the
     current date and time if possible. When consecutive primary values
     are physically stored near each other, `InnoDB' can insert and
     retrieve them faster.

   * See *Note optimize-numeric:: for reasons why a numeric column is
     usually preferable to an equivalent string column.


File: manual.info,  Node: optimize-blob,  Next: procedure-analyse,  Prev: optimize-character,  Up: optimize-data-types

8.4.2.3 Optimizing for BLOB Types
.................................

   * When storing a large blob containing textual data, consider
     compressing it first. Do not use this technique when the entire
     table is compressed by `InnoDB' or `MyISAM'.

   * For a table with several columns, to reduce memory requirements
     for queries that do not use the BLOB column, consider splitting
     the BLOB column into a separate table and referencing it with a
     join query when needed.

   * Since the performance requirements to retrieve and display a BLOB
     value might be very different from other data types, you could put
     the BLOB-specific table on a different storage device or even a
     separate database instance. For example, to retrieve a BLOB might
     require a large sequential disk read that is better suited to a
     traditional hard drive than to an SSD device.

   * See *Note optimize-character:: for reasons why a binary `VARCHAR'
     column is sometimes preferable to an equivalent BLOB column.

   * Rather than testing for equality against a very long text string,
     you can store a hash of the column value in a separate column,
     index that column, and test the hashed value in queries. (Use the
     `MD5()' or `CRC32()' function to produce the hash value.) Since
     hash functions can produce duplicate results for different inputs,
     you still include a clause `AND BLOB_COLUMN = LONG_STRING_VALUE' in
     the query to guard against false matches; the performance benefit
     comes from the smaller, easily scanned index for the hashed values.


File: manual.info,  Node: procedure-analyse,  Prev: optimize-blob,  Up: optimize-data-types

8.4.2.4 Using `PROCEDURE ANALYSE'
.................................

`ANALYSE([MAX_ELEMENTS[,MAX_MEMORY]])'

`ANALYSE()' examines the result from a query and returns an analysis of
the results that suggests optimal data types for each column that may
help reduce table sizes.  To obtain this analysis, append `PROCEDURE
ANALYSE' to the end of a *Note `SELECT': select. statement:

     SELECT ... FROM ... WHERE ... PROCEDURE ANALYSE([MAX_ELEMENTS,[MAX_MEMORY]])

For example:

     SELECT col1, col2 FROM table1 PROCEDURE ANALYSE(10, 2000);

The results show some statistics for the values returned by the query,
and propose an optimal data type for the columns.  This can be helpful
for checking your existing tables, or after importing new data. You may
need to try different settings for the arguments so that `PROCEDURE
ANALYSE()' does not suggest the *Note `ENUM': enum. data type when it
is not appropriate.

The arguments are optional and are used as follows:

   * MAX_ELEMENTS (default 256) is the maximum number of distinct
     values that `ANALYSE()' notices per column. This is used by
     `ANALYSE()' to check whether the optimal data type should be of
     type *Note `ENUM': enum.; if there are more than MAX_ELEMENTS
     distinct values, then *Note `ENUM': enum. is not a suggested type.

   * MAX_MEMORY (default 8192) is the maximum amount of memory that
     `ANALYSE()' should allocate per column while trying to find all
     distinct values.


File: manual.info,  Node: optimize-multi-tables,  Prev: optimize-data-types,  Up: optimizing-database-structure

8.4.3 Optimizing for Many Tables
--------------------------------

* Menu:

* table-cache::                  How MySQL Opens and Closes Tables
* creating-many-tables::         Disadvantages of Creating Many Tables in the Same Database
* internal-temporary-tables::    How MySQL Uses Internal Temporary Tables

Some techniques for keeping individual queries fast involve splitting
data across many tables. When the number of tables runs into the
thousands or even millions, the overhead of dealing with all these
tables becomes a new performance consideration.


File: manual.info,  Node: table-cache,  Next: creating-many-tables,  Prev: optimize-multi-tables,  Up: optimize-multi-tables

8.4.3.1 How MySQL Opens and Closes Tables
.........................................

When you execute a *Note `mysqladmin status': mysqladmin.  command, you
should see something like this:

     Uptime: 426 Running threads: 1 Questions: 11082
     Reloads: 1 Open tables: 12

The `Open tables' value of 12 can be somewhat puzzling if you have only
six tables.

MySQL is multi-threaded, so there may be many clients issuing queries
for a given table simultaneously. To minimize the problem with multiple
client sessions having different states on the same table, the table is
opened independently by each concurrent session. This uses additional
memory but normally increases performance. With `MyISAM' tables, one
extra file descriptor is required for the data file for each client
that has the table open. (By contrast, the index file descriptor is
shared between all sessions.)

The `table_open_cache' and `max_connections' system variables affect
the maximum number of files the server keeps open. If you increase one
or both of these values, you may run up against a limit imposed by your
operating system on the per-process number of open file descriptors.
Many operating systems permit you to increase the open-files limit,
although the method varies widely from system to system. Consult your
operating system documentation to determine whether it is possible to
increase the limit and how to do so.

`table_open_cache' is related to `max_connections'. For example, for
200 concurrent running connections, specify a table cache size of at
least `200 * N', where N is the maximum number of tables per join in
any of the queries which you execute. You must also reserve some extra
file descriptors for temporary tables and files.

Make sure that your operating system can handle the number of open file
descriptors implied by the `table_open_cache' setting. If
`table_open_cache' is set too high, MySQL may run out of file
descriptors and refuse connections, fail to perform queries, and be
very unreliable.  You also have to take into account that the `MyISAM'
storage engine needs two file descriptors for each unique open table.
You can increase the number of file descriptors available to MySQL
using the `--open-files-limit' startup option to *Note `mysqld':
mysqld. See *Note not-enough-file-handles::.

The cache of open tables is kept at a level of `table_open_cache'
entries. The default value is 400; this can be changed with the
`--table_open_cache' option to *Note `mysqld': mysqld. Note that MySQL
may temporarily open more tables than this to execute queries.

MySQL closes an unused table and removes it from the table cache under
the following circumstances:

   * When the cache is full and a thread tries to open a table that is
     not in the cache.

   * When the cache contains more than `table_open_cache' entries and a
     table in the cache is no longer being used by any threads.

   * When a table flushing operation occurs. This happens when someone
     issues a *Note `FLUSH TABLES': flush. statement or executes a
     *Note `mysqladmin flush-tables': mysqladmin. or *Note `mysqladmin
     refresh': mysqladmin. command.

When the table cache fills up, the server uses the following procedure
to locate a cache entry to use:

   * Tables that are not currently in use are released, beginning with
     the table least recently used.

   * If a new table needs to be opened, but the cache is full and no
     tables can be released, the cache is temporarily extended as
     necessary. When the cache is in a temporarily extended state and a
     table goes from a used to unused state, the table is closed and
     released from the cache.

A `MyISAM' table is opened for each concurrent access. This means the
table needs to be opened twice if two threads access the same table or
if a thread accesses the table twice in the same query (for example, by
joining the table to itself). Each concurrent open requires an entry in
the table cache. The first open of any `MyISAM' table takes two file
descriptors: one for the data file and one for the index file. Each
additional use of the table takes only one file descriptor for the data
file. The index file descriptor is shared among all threads.

If you are opening a table with the `HANDLER TBL_NAME OPEN' statement,
a dedicated table object is allocated for the thread. This table object
is not shared by other threads and is not closed until the thread calls
`HANDLER TBL_NAME CLOSE' or the thread terminates. When this happens,
the table is put back in the table cache (if the cache is not full). See
*Note handler::.

You can determine whether your table cache is too small by checking the
*Note `mysqld': mysqld. status variable `Opened_tables', which
indicates the number of table-opening operations since the server
started:

     mysql> SHOW GLOBAL STATUS LIKE 'Opened_tables';
     +---------------+-------+
     | Variable_name | Value |
     +---------------+-------+
     | Opened_tables | 2741  |
     +---------------+-------+

If the value is very large or increases rapidly, even when you have not
issued many *Note `FLUSH TABLES': flush.  statements, increase the
table cache size. See *Note server-system-variables::, and *Note
server-status-variables::.


File: manual.info,  Node: creating-many-tables,  Next: internal-temporary-tables,  Prev: table-cache,  Up: optimize-multi-tables

8.4.3.2 Disadvantages of Creating Many Tables in the Same Database
..................................................................

If you have many `MyISAM' tables in the same database directory, open,
close, and create operations are slow. If you execute *Note `SELECT':
select.  statements on many different tables, there is a little
overhead when the table cache is full, because for every table that has
to be opened, another must be closed. You can reduce this overhead by
increasing the number of entries permitted in the table cache.


File: manual.info,  Node: internal-temporary-tables,  Prev: creating-many-tables,  Up: optimize-multi-tables

8.4.3.3 How MySQL Uses Internal Temporary Tables
................................................

In some cases, the server creates internal temporary tables while
processing queries. Such a table can be held in memory and processed by
the `MEMORY' storage engine, or stored on disk and processed by the
`MyISAM' storage engine. The server may create a temporary table
initially as an in-memory table, then convert it to an on-disk table if
it becomes too large. Users have no direct control over when the server
creates an internal temporary table or which storage engine the server
uses to manage it.

Temporary tables can be created under conditions such as these:

   * If there is an `ORDER BY' clause and a different `GROUP BY'
     clause, or if the `ORDER BY' or `GROUP BY' contains columns from
     tables other than the first table in the join queue, a temporary
     table is created.

   * `DISTINCT' combined with `ORDER BY' may require a temporary table.

   * If you use the `SQL_SMALL_RESULT' option, MySQL uses an in-memory
     temporary table, unless the query also contains elements
     (described later) that require on-disk storage.

To determine whether a query requires a temporary table, use *Note
`EXPLAIN': explain. and check the `Extra' column to see whether it says
`Using temporary'. See *Note using-explain::.

Some conditions prevent the use of an in-memory temporary table, in
which case the server uses an on-disk table instead:

   * Presence of a *Note `BLOB': blob. or *Note `TEXT': blob. column in
     the table

   * Presence of any string column in a `GROUP BY' or `DISTINCT' clause
     larger than 512 bytes

   * Presence of any string column with a maximum length larger than
     512 (bytes for binary strings, characters for nonbinary strings)
     in the *Note `SELECT': select. list, if *Note `UNION': union. or
     *Note `UNION ALL': union.  is used

If an internal temporary table is created initially as an in-memory
table but becomes too large, MySQL automatically converts it to an
on-disk table. The maximum size for in-memory temporary tables is the
minimum of the `tmp_table_size' and `max_heap_table_size' values.  This
differs from `MEMORY' tables explicitly created with *Note `CREATE
TABLE': create-table.: For such tables, the `max_heap_table_size' system
variable determines how large the table is permitted to grow and there
is no conversion to on-disk format.

When the server creates an internal temporary table (either in memory
or on disk), it increments the `Created_tmp_tables' status variable. If
the server creates the table on disk (either initially or by converting
an in-memory table) it increments the `Created_tmp_disk_tables' status
variable.


File: manual.info,  Node: optimizing-innodb,  Next: optimizing-myisam,  Prev: optimizing-database-structure,  Up: optimization

8.5 Optimizing for `InnoDB' Tables
==================================

* Menu:

* optimizing-innodb-storage-layout::  Optimizing Storage Layout for `InnoDB' Tables
* optimizing-innodb-transaction-management::  Optimizing `InnoDB' Transaction Management
* optimizing-innodb-logging::    Optimizing `InnoDB' Logging
* optimizing-innodb-bulk-data-loading::  Bulk Data Loading for `InnoDB' Tables
* optimizing-innodb-queries::    Optimizing `InnoDB' Queries
* optimizing-innodb-ddl-operations::  Optimizing `InnoDB' DDL Operations
* optimizing-innodb-diskio::     Optimizing `InnoDB' Disk I/O
* optimizing-innodb-configuration-variables::  Optimizing `InnoDB' Configuration Variables
* optimizing-innodb-many-tables::  Optimizing `InnoDB' for Systems with Many Tables

*Note `InnoDB': innodb-storage-engine. is the storage engine that MySQL
customers typically use in production databases where reliability and
concurrency are important. Because `InnoDB' is the default storage
engine in MySQL 5.5 and higher, you can expect to see `InnoDB' tables
more often than before. This section explains how to optimize database
operations for `InnoDB' tables.


File: manual.info,  Node: optimizing-innodb-storage-layout,  Next: optimizing-innodb-transaction-management,  Prev: optimizing-innodb,  Up: optimizing-innodb

8.5.1 Optimizing Storage Layout for `InnoDB' Tables
---------------------------------------------------

   * Once your data reaches a stable size, or a growing table has
     increased by tens or some hundreds of megabytes, consider using
     the `OPTIMIZE TABLE' statement to reorganize the table and compact
     any wasted space. The reorganized tables require less disk I/O to
     perform full table scans. This is a straightforward technique that
     can improve performance when other techniques such as improving
     index usage or tuning application code are not practical.

     `OPTIMIZE TABLE' copies the data part of the table and rebuilds
     the indexes. The benefits come from improved packing of data
     within indexes, and reduced fragmentation within the tablespaces
     and on disk. The benefits vary depending on the data in each
     table. You may find that there are significant gains for some and
     not for others, or that the gains decrease over time until you next
     optimize the table. This operation can be slow if the table is
     large or if the indexes being rebuilt don't fit into the buffer
     pool. The first run after adding a lot of data to a table is often
     much slower than later runs.

   * In `InnoDB', having a long `PRIMARY KEY' (either a single column
     with a lengthy value, or several columns that form a long
     composite value) wastes a lot of disk space. The primary key value
     for a row is duplicated in all the secondary index records that
     point to the same row. (See *Note innodb-table-and-index::.)
     Create an `AUTO_INCREMENT' column as the primary key if your
     primary key is long, or index a prefix of a long `VARCHAR' column
     instead of the entire column.

   * Use the *Note `VARCHAR': char. data type instead of *Note `CHAR':
     char. to store variable-length strings or for columns with many
     `NULL' values. A *Note `CHAR(N)': char.  column always takes N
     characters to store data, even if the string is shorter or its
     value is `NULL'. Smaller tables fit better in the buffer pool and
     reduce disk I/O.

     When using `COMPACT' row format (the default `InnoDB' format in
     MySQL 5.5) and variable-length character sets, such as `utf8' or
     `sjis', *Note `CHAR(N)': char.  columns occupy a variable amount
     of space, but still at least N bytes.

   * For tables that are big, or contain lots of repetitive text or
     numeric data, consider using `COMPRESSED' row format. Less disk
     I/O is required to bring data into the buffer pool, or to perform
     full table scans. Before making a permanent decision, measure the
     amount of compression you can achieve by using `COMPRESSED' versus
     `COMPACT' row format.


File: manual.info,  Node: optimizing-innodb-transaction-management,  Next: optimizing-innodb-logging,  Prev: optimizing-innodb-storage-layout,  Up: optimizing-innodb

8.5.2 Optimizing `InnoDB' Transaction Management
------------------------------------------------

To optimize `InnoDB' transaction processing, find the ideal balance
between the performance overhead of transactional features and the
workload of your server. For example, an application might encounter
performance issues if it commits thousands of times per second, and
different performance issues if it commits only every 2-3 hours.

   * The default MySQL setting `AUTOCOMMIT=1' can impose performance
     limitations on a busy database server. Where practical, wrap
     several related DML operations into a single transaction, by
     issuing `SET AUTOCOMMIT=0' or a `START TRANSACTION' statement,
     followed by a `COMMIT' statement after making all the changes.

     `InnoDB' must flush the log to disk at each transaction commit if
     that transaction made modifications to the database. When each
     change is followed by a commit (as with the default autocommit
     setting), the I/O throughput of the storage device puts a cap on
     the number of potential operations per second.

   * Avoid performing rollbacks after inserting, updating, or deleting
     huge numbers of rows. If a big transaction is slowing down server
     performance, rolling it back can make the problem worse,
     potentially taking several times as long to perform as the
     original DML operations. Killing the database process does not
     help, because the rollback starts again on server startup.

     To minimize the chance of this issue occurring: increase the size
     of the buffer pool so that all the DML changes can be cached
     rather than immediately written to disk; set
     `innodb_change_buffering=all' so that update and delete operations
     are buffered in addition to inserts; and consider issuing `COMMIT'
     statements periodically during the big DML operation, possibly
     breaking a single delete or update into multiple statements that
     operate on smaller numbers of rows.

     To get rid of a runaway rollback once it occurs, increase the
     buffer pool so that the rollback becomes CPU-bound and runs fast,
     or kill the server and restart with `innodb_force_recovery=3', as
     explained in *Note innodb-recovery::.

     This issue is expected to be less prominent in MySQL 5.5 and up,
     or in MySQL 5.1 with the InnoDB Plugin, because the default setting
     `innodb_change_buffering=all' allows update and delete operations
     to be cached in memory, making them faster to perform in the first
     place, and also faster to roll back if needed. Make sure to use
     this parameter setting on servers that process long-running
     transactions with many inserts, updates, or deletes.

   * If you can afford the loss of some of the latest committed
     transactions if a crash occurs, you can set the
     `innodb_flush_log_at_trx_commit' parameter to 0. `InnoDB' tries to
     flush the log once per second anyway, although the flush is not
     guaranteed. Also, set the value of `innodb_support_xa' to 0, which
     will reduce the number of disk flushes due to synchronizing on
     disk data and the binary log.

   * When rows are modified or deleted, the rows and associated undo
     logs are not physically removed immediately, or even immediately
     after the transaction commits. The old data is preserved until
     transactions that started earlier or concurrently are finished, so
     that those transactions can access the previous state of modified
     or deleted rows. Thus, a long-running transaction can prevent
     `InnoDB' from purging data that was changed by a different
     transaction.

   * When rows are modified or deleted within a long-running
     transaction, other transactions using the `READ COMMITTED' and
     `REPEATABLE READ' isolation levels have to do more work to
     reconstruct the older data if they read those same rows.

   * When a long-running transaction modifies a table, queries against
     that table from other transactions do not make use of the covering
     index technique. Queries that normally could retrieve all the
     result columns from a secondary index, instead look up the
     appropriate values from the table data.

     If secondary index pages are found to have a `PAGE_MAX_TRX_ID'
     that is too new, or if records in the secondary index are
     delete-marked, `InnoDB' may need to look up records using a
     clustered index.


File: manual.info,  Node: optimizing-innodb-logging,  Next: optimizing-innodb-bulk-data-loading,  Prev: optimizing-innodb-transaction-management,  Up: optimizing-innodb

8.5.3 Optimizing `InnoDB' Logging
---------------------------------

   * Make your log files big, even as big as the buffer pool.  When
     `InnoDB' has written the log files full, it must write the
     modified contents of the buffer pool to disk in a checkpoint.
     Small log files cause many unnecessary disk writes. Although
     historically big log files caused lengthy recovery times, recovery
     is now much faster and you can confidently use large log files.

   * Make the log buffer quite large as well (on the order of 8MB).


File: manual.info,  Node: optimizing-innodb-bulk-data-loading,  Next: optimizing-innodb-queries,  Prev: optimizing-innodb-logging,  Up: optimizing-innodb

8.5.4 Bulk Data Loading for `InnoDB' Tables
-------------------------------------------

These performance tips supplement the general guidelines for fast
inserts in *Note insert-speed::.

   * When importing data into `InnoDB', turn off autocommit mode,
     because it performs a log flush to disk for every insert. To
     disable autocommit during your import operation, surround it with
     *Note `SET autocommit': commit. and *Note `COMMIT': commit.
     statements:

          SET autocommit=0;... SQL IMPORT STATEMENTS ...
          COMMIT;

     The *Note `mysqldump': mysqldump. option `--opt' creates dump files
     that are fast to import into an `InnoDB' table, even without
     wrapping them with the *Note `SET autocommit': commit. and *Note
     `COMMIT': commit. statements.

   * If you have `UNIQUE' constraints on secondary keys, you can speed
     up table imports by temporarily turning off the uniqueness checks
     during the import session:

          SET unique_checks=0;... SQL IMPORT STATEMENTS ...
          SET unique_checks=1;

     For big tables, this saves a lot of disk I/O because `InnoDB' can
     use its insert buffer to write secondary index records in a batch.
     Be certain that the data contains no duplicate keys.

   * If you have `FOREIGN KEY' constraints in your tables, you can
     speed up table imports by turning off the foreign key checks for
     the duration of the import session:

          SET foreign_key_checks=0;... SQL IMPORT STATEMENTS ...
          SET foreign_key_checks=1;

     For big tables, this can save a lot of disk I/O.

   * Use the multiple-row *Note `INSERT': insert.  syntax to reduce
     communication overhead between the client and the server if you
     need to insert many rows:

          INSERT INTO yourtable VALUES (1,2), (5,5), ...;

     This tip is valid for inserts into any table, not just `InnoDB'
     tables.

   * When doing bulk inserts into tables with auto-increment columns,
     set `innodb_autoinc_lock_mode' to 2 instead of the default value
     1. See *Note innodb-auto-increment-configurable:: for details.


File: manual.info,  Node: optimizing-innodb-queries,  Next: optimizing-innodb-ddl-operations,  Prev: optimizing-innodb-bulk-data-loading,  Up: optimizing-innodb

8.5.5 Optimizing `InnoDB' Queries
---------------------------------

To tune queries for `InnoDB' tables, create an appropriate set of
indexes on each table. See *Note mysql-indexes:: for details. Follow
these guidelines for `InnoDB' indexes:

   * Because each `InnoDB' table has a primary key (whether you request
     one or not), specify a set of primary key columns for each table,
     columns that are used in the most important and time-critical
     queries.

   * Do not specify too many or too long columns in the primary key,
     because these column values are duplicated in each secondary index.

   * Do not create a separate secondary index for each column, because
     each query can only make use of one index. Indexes on rarely
     tested columns or columns with only a few different values might
     not be helpful for any queries. If you have many queries for the
     same table, testing different combinations of columns, try to
     create a small number of concatenated indexes rather than a large
     number of single-column indexes. If an index contains all the
     columns needed for the result set (known as a covering index), the
     query might be able to avoid reading the table data at all.

   * If an indexed column cannot contain any `NULL' values, declare it
     as `NOT NULL' when you create the table. The optimizer can better
     determine which index is most effective to use for a query, when
     it knows whether each column contains `NULL' values or not.

   * If you often have recurring queries for tables that are not
     updated frequently, enable the query cache:

          [mysqld]
          query_cache_type = 1
          query_cache_size = 10M


File: manual.info,  Node: optimizing-innodb-ddl-operations,  Next: optimizing-innodb-diskio,  Prev: optimizing-innodb-queries,  Up: optimizing-innodb

8.5.6 Optimizing `InnoDB' DDL Operations
----------------------------------------

   * For DDL operations on tables and indexes (`CREATE', `ALTER', and
     `DROP' statements), the most significant aspect for `InnoDB'
     tables is that creating and dropping secondary indexes is much
     faster in MySQL 5.5 and higher, than in MySQL 5.1 and before. See
     *Note innodb-create-index:: for details.

   * `Fast index creation' makes it faster in some cases to drop an
     index before loading data into a table, then re-create the index
     after loading the data.

   * Use *Note `TRUNCATE TABLE': truncate-table. to empty a table, not
     `DELETE FROM TBL_NAME'. Foreign key constraints can make a
     `TRUNCATE' statement work like a regular `DELETE' statement, in
     which case a sequence of commands like *Note `DROP TABLE':
     drop-table. and *Note `CREATE TABLE': create-table. might be
     fastest.

   * Because the primary key is integral to the storage layout of each
     `InnoDB' table, and changing the definition of the primary key
     involves reorganizing the whole table, always set up the primary
     key as part of the *Note `CREATE TABLE': create-table. statement,
     and plan ahead so that you do not need to `ALTER' or `DROP' the
     primary key afterward.


File: manual.info,  Node: optimizing-innodb-diskio,  Next: optimizing-innodb-configuration-variables,  Prev: optimizing-innodb-ddl-operations,  Up: optimizing-innodb

8.5.7 Optimizing `InnoDB' Disk I/O
----------------------------------

If you follow the best practices for database design and the tuning
techniques for SQL operations, but your database is still slowed by
heavy disk I/O activity, explore these low-level techniques related to
disk I/O. If the Unix `top' tool or the Windows Task Manager shows that
the CPU usage percentage with your workload is less than 70%, your
workload is probably disk-bound.

   * When table data is cached in the `InnoDB' buffer pool, it can be
     processed over and over by queries without requiring any disk I/O.
     Specify the size of the buffer pool with the
     `innodb_buffer_pool_size' option. This memory area is important
     enough that busy databases often specify a size approximately 80%
     of the amount of physical memory. For more information, see *Note
     innodb-buffer-pool::.

   * In some versions of GNU/Linux and Unix, flushing files to disk
     with the Unix `fsync()' call (which `InnoDB' uses by default) and
     similar methods is surprisingly slow. If database write performance
     is an issue, conduct benchmarks with the `innodb_flush_method'
     parameter set to `O_DSYNC'.

   * When using the `InnoDB' storage engine on Solaris 10 for x86_64
     architecture (AMD Opteron), use direct I/O for `InnoDB'-related
     files, to avoid degradation of `InnoDB' performance. To use direct
     I/O for an entire UFS file system used for storing
     `InnoDB'-related files, mount it with the `forcedirectio' option;
     see `mount_ufs(1M)'. (The default on Solaris 10/x86_64 is _not_ to
     use this option.)  To apply direct I/O only to `InnoDB' file
     operations rather than the whole file system, set
     `innodb_flush_method = O_DIRECT'. With this setting, `InnoDB' calls
     `directio()' instead of `fcntl()' for I/O to data files (not for
     I/O to log files).

   * When using the `InnoDB' storage engine with a large
     `innodb_buffer_pool_size' value on any release of Solaris 2.6 and
     up and any platform (sparc/x86/x64/amd64), conduct benchmarks with
     `InnoDB' data files and log files on raw devices or on a separate
     direct I/O UFS file system, using the `forcedirectio' mount option
     as described earlier. (It is necessary to use the mount option
     rather than setting `innodb_flush_method' if you want direct I/O
     for the log files.) Users of the Veritas file system VxFS should
     use the `convosync=direct' mount option.

     Do not place other MySQL data files, such as those for `MyISAM'
     tables, on a direct I/O file system. Executables or libraries _must
     not_ be placed on a direct I/O file system.

   * If you have additional storage devices available to set up a RAID
     configuration or symbolic links to different disks, *Note
     disk-issues:: for additional low-level I/O tips.


File: manual.info,  Node: optimizing-innodb-configuration-variables,  Next: optimizing-innodb-many-tables,  Prev: optimizing-innodb-diskio,  Up: optimizing-innodb

8.5.8 Optimizing `InnoDB' Configuration Variables
-------------------------------------------------

Different settings work best for servers with light, predictable loads,
versus servers that are running near full capacity all the time, or
that experience spikes of high activity.

Because the `InnoDB' storage engine performs many of its optimizations
automatically, many performance-tuning tasks involve monitoring to
ensure that the database is performing well, and changing configuration
options when performance drops. See *Note innodb-performance-schema::
for information about detailed `InnoDB' performance monitoring.

For information about the most important and most recent `InnoDB'
performance features, see *Note innodb-performance::. Even if you have
used `InnoDB' tables in prior versions, these features might be new to
you, because they are from the `InnoDB Plugin'. The Plugin co-existed
alongside the built-in `InnoDB' in MySQL 5.1, and becomes the default
storage engine in MySQL 5.5 and higher.

The main configuration steps you can perform include:

   * Enabling `InnoDB' to use high-performance memory allocators on
     systems that include them. See *Note
     innodb-performance-use_sys_malloc::.

   * Controlling the types of DML operations for which `InnoDB' buffers
     the changed data, to avoid frequent small disk writes. See *Note
     innodb-performance-change_buffering::.  Because the default is to
     buffer all types of DML operations, only change this setting if
     you need to reduce the amount of buffering.

   * Turning the adaptive hash indexing feature on and off. See *Note
     innodb-performance-adaptive_hash_index::.  You might change this
     setting during periods of unusual activity, then restore it to its
     original setting.

   * Setting a limit on the number of concurrent threads that `InnoDB'
     processes, if context switching is a bottleneck. See *Note
     innodb-performance-thread_concurrency::.

   * Controlling the amount of prefetching that `InnoDB' does with its
     read-ahead operations. When the system has unused I/O capacity,
     more read-ahead can improve the performance of queries. Too much
     read-ahead can cause periodic drops in performance on a heavily
     loaded system. See *Note innodb-performance-read_ahead::.

   * Increasing the number of background threads for read or write
     operations, if you have a high-end I/O subsystem that is not fully
     utilized by the default values. See *Note
     innodb-performance-multiple_io_threads::.

   * Controlling how much I/O `InnoDB' performs in the background. See
     *Note innodb-performance-thread_io_rate::. The amount of
     background I/O is higher than in MySQL 5.1, so you might scale
     back this setting if you observe periodic drops in performance.

   * Controlling the algorithm that determines when `InnoDB' performs
     certain types of background writes. See *Note
     innodb-performance-adaptive_flushing::. The algorithm works for
     some types of workloads but not others, so might turn off this
     setting if you observe periodic drops in performance.

   * Taking advantage of multicore processors and their cache memory
     configuration, to minimize delays in context switching. See *Note
     innodb-performance-spin_lock_polling::.

   * Preventing one-time operations such as table scans from
     interfering with the frequently accessed data stored in the
     `InnoDB' buffer cache. See *Note
     innodb-performance-midpoint_insertion::.

   * Adjusting your log files to a size that makes sense for
     reliability and crash recovery. See *Note
     innodb-performance-recovery::. Historically, people have kept
     their `InnoDB' log files small to avoid long startup times after a
     crash. Internal improvements in `InnoDB' make startup much faster,
     so the log file size is not such a performance factor anymore. If
     your log files are artificially small, increasing the size can
     help performance by reducing the I/O that occurs as redo log
     records are recycled.

   * Configuring the size and number of instances for the `InnoDB'
     buffer pool, especially important for systems with multi-gigabyte
     buffer pools. See *Note innodb-multiple-buffer-pools::.

   * Increasing the maximum number of concurrent transactions, which
     dramatically improves scalability for the busiest databases. See
     *Note innodb-multiple-rollback-segments::.  Although this feature
     does not require any action during day-to-day operation, you must
     perform a slow shutdown during or after upgrading the database to
     MySQL 5.5 to enable the higher limit.

   * Moving purge operations (a type of garbage collection) into a
     background thread. See *Note innodb-improved-purge-scheduling::. To
     effectively measure the results of this setting, tune the other
     I/O-related and thread-related configuration settings first.

   * Reducing the amount of switching that `InnoDB' does between
     concurrent threads, so that SQL operations on a busy server do not
     queue up and form a `traffic jam'. Set a value for the
     `innodb_thread_concurrency' option, up to approximately 32 for a
     high-powered modern system. Increase the value for the
     `innodb_concurrency_tickets' option, typically to 5000 or so, This
     combination of options sets a cap on the number of threads that
     `InnoDB' processes at any one time, and allows each thread to do
     substantial work before being swapped out, so that the number of
     waiting threads stays low and operations can complete without
     excessive context switching.


File: manual.info,  Node: optimizing-innodb-many-tables,  Prev: optimizing-innodb-configuration-variables,  Up: optimizing-innodb

8.5.9 Optimizing `InnoDB' for Systems with Many Tables
------------------------------------------------------

   * `InnoDB' computes index cardinality values for a table the first
     time that table is accessed after startup, instead of storing such
     values in the table. This step can take significant time on
     systems that partition the data into many tables. Since this
     overhead only applies to the initial table open operation, to
     `warm up' a table for later use, access it immediately after
     startup by issuing a statement such as `SELECT 1 FROM TBL_NAME
     LIMIT 1'.


File: manual.info,  Node: optimizing-myisam,  Next: optimizing-memory-tables,  Prev: optimizing-innodb,  Up: optimization

8.6 Optimizing for `MyISAM' Tables
==================================

* Menu:

* optimizing-queries-myisam::    Optimizing `MyISAM' Queries
* optimizing-myisam-bulk-data-loading::  Bulk Data Loading for `MyISAM' Tables
* repair-table-speed::           Speed of `REPAIR TABLE' Statements

The *Note `MyISAM': myisam-storage-engine. storage engine performs best
with read-mostly data or with low-concurrency operations, because table
locks limit the ability to perform simultaneous updates. In MySQL 5.5,
*Note `InnoDB': innodb-storage-engine. is the default storage engine
rather than `MyISAM'.


File: manual.info,  Node: optimizing-queries-myisam,  Next: optimizing-myisam-bulk-data-loading,  Prev: optimizing-myisam,  Up: optimizing-myisam

8.6.1 Optimizing `MyISAM' Queries
---------------------------------

Some general tips for speeding up queries on `MyISAM' tables:

   * To help MySQL better optimize queries, use *Note `ANALYZE TABLE':
     analyze-table. or run *Note `myisamchk --analyze': myisamchk. on a
     table after it has been loaded with data. This updates a value for
     each index part that indicates the average number of rows that
     have the same value. (For unique indexes, this is always 1.)
     MySQL uses this to decide which index to choose when you join two
     tables based on a nonconstant expression. You can check the result
     from the table analysis by using `SHOW INDEX FROM TBL_NAME' and
     examining the `Cardinality' value. *Note `myisamchk --description
     --verbose': myisamchk. shows index distribution information.

   * To sort an index and data according to an index, use *Note
     `myisamchk --sort-index --sort-records=1': myisamchk.  (assuming
     that you want to sort on index 1). This is a good way to make
     queries faster if you have a unique index from which you want to
     read all rows in order according to the index. The first time you
     sort a large table this way, it may take a long time.

   * Try to avoid complex *Note `SELECT': select.  queries on `MyISAM'
     tables that are updated frequently, to avoid problems with table
     locking that occur due to contention between readers and writers.

   * `MyISAM' supports concurrent inserts: If a table has no free
     blocks in the middle of the data file, you can *Note `INSERT':
     insert. new rows into it at the same time that other threads are
     reading from the table. If it is important to be able to do this,
     consider using the table in ways that avoid deleting rows. Another
     possibility is to run *Note `OPTIMIZE TABLE': optimize-table. to
     defragment the table after you have deleted a lot of rows from it.
     This behavior is altered by setting the `concurrent_insert'
     variable.  You can force new rows to be appended (and therefore
     permit concurrent inserts), even in tables that have deleted rows.
     See *Note concurrent-inserts::.

   * For `MyISAM' tables that change frequently, try to avoid all
     variable-length columns (*Note `VARCHAR': char, *Note `BLOB':
     blob, and *Note `TEXT': blob.). The table uses dynamic row format
     if it includes even a single variable-length column. See *Note
     storage-engines::.

   * It is normally not useful to split a table into different tables
     just because the rows become large. In accessing a row, the
     biggest performance hit is the disk seek needed to find the first
     byte of the row. After finding the data, most modern disks can
     read the entire row fast enough for most applications. The only
     cases where splitting up a table makes an appreciable difference
     is if it is a `MyISAM' table using dynamic row format that you can
     change to a fixed row size, or if you very often need to scan the
     table but do not need most of the columns. See *Note
     storage-engines::.

   * Use `ALTER TABLE ... ORDER BY EXPR1, EXPR2, ...' if you usually
     retrieve rows in `EXPR1, EXPR2, ...' order. By using this option
     after extensive changes to the table, you may be able to get
     higher performance.

   * If you often need to calculate results such as counts based on
     information from a lot of rows, it may be preferable to introduce
     a new table and update the counter in real time.  An update of the
     following form is very fast:

          UPDATE TBL_NAME SET COUNT_COL=COUNT_COL+1 WHERE KEY_COL=CONSTANT;

     This is very important when you use MySQL storage engines such as
     `MyISAM' that has only table-level locking (multiple readers with
     single writers). This also gives better performance with most
     database systems, because the row locking manager in this case has
     less to do.

   * Use *Note `INSERT DELAYED': insert-delayed. when you do not need
     to know when your data is written. This reduces the overall
     insertion impact because many rows can be written with a single
     disk write.

   * Use `INSERT LOW_PRIORITY' when you want to give *Note `SELECT':
     select. statements higher priority than your inserts.

     Use `SELECT HIGH_PRIORITY' to get retrievals that jump the queue.
     That is, the *Note `SELECT': select. is executed even if there is
     another client waiting to do a write.

     `LOW_PRIORITY' and `HIGH_PRIORITY' have an effect only for storage
     engines that use only table-level locking (such as `MyISAM',
     `MEMORY', and `MERGE').

   * Use *Note `OPTIMIZE TABLE': optimize-table.  periodically to avoid
     fragmentation with dynamic-format `MyISAM' tables. See *Note
     myisam-table-formats::.

   * Declaring a `MyISAM' table with the `DELAY_KEY_WRITE=1' table
     option makes index updates faster because they are not flushed to
     disk until the table is closed. The downside is that if something
     kills the server while such a table is open, you must ensure that
     the table is okay by running the server with the
     `--myisam-recover-options' option, or by running *Note
     `myisamchk': myisamchk. before restarting the server. (However,
     even in this case, you should not lose anything by using
     `DELAY_KEY_WRITE', because the key information can always be
     generated from the data rows.)

   * Strings are automatically prefix- and end-space compressed in
     `MyISAM' indexes. See *Note create-index::.

   * You can increase performance by caching queries or answers in your
     application and then executing many inserts or updates together.
     Locking the table during this operation ensures that the index
     cache is only flushed once after all updates. You can also take
     advantage of MySQL's query cache to achieve similar results; see
     *Note query-cache::.


File: manual.info,  Node: optimizing-myisam-bulk-data-loading,  Next: repair-table-speed,  Prev: optimizing-queries-myisam,  Up: optimizing-myisam

8.6.2 Bulk Data Loading for `MyISAM' Tables
-------------------------------------------

These performance tips supplement the general guidelines for fast
inserts in *Note insert-speed::.

   * To improve performance when multiple clients insert a lot of rows,
     use the *Note `INSERT DELAYED': insert-delayed.  statement. See
     *Note insert-delayed::. This technique works for `MyISAM' and some
     other storage engines, but not `InnoDB'.

   * For a `MyISAM' table, you can use concurrent inserts to add rows
     at the same time that *Note `SELECT': select. statements are
     running, if there are no deleted rows in middle of the data file.
     See *Note concurrent-inserts::.

   * With some extra work, it is possible to make *Note `LOAD DATA
     INFILE': load-data. run even faster for a `MyISAM' table when the
     table has many indexes. Use the following procedure:

       1. Execute a *Note `FLUSH TABLES': flush. statement or a *Note
          `mysqladmin flush-tables': mysqladmin. command.

       2. Use *Note `myisamchk --keys-used=0 -rq /PATH/TO/DB/TBL_NAME':
          myisamchk.  to remove all use of indexes for the table.

       3. Insert data into the table with *Note `LOAD DATA INFILE':
          load-data. This does not update any indexes and therefore is
          very fast.

       4. If you intend only to read from the table in the future, use
          *Note `myisampack': myisampack. to compress it. See *Note
          compressed-format::.

       5. Re-create the indexes with *Note `myisamchk -rq
          /PATH/TO/DB/TBL_NAME': myisamchk.  This creates the index
          tree in memory before writing it to disk, which is much
          faster that updating the index during *Note `LOAD DATA
          INFILE': load-data. because it avoids lots of disk seeks. The
          resulting index tree is also perfectly balanced.

       6. Execute a *Note `FLUSH TABLES': flush. statement or a *Note
          `mysqladmin flush-tables': mysqladmin. command.

     *Note `LOAD DATA INFILE': load-data. performs the preceding
     optimization automatically if the `MyISAM' table into which you
     insert data is empty. The main difference between automatic
     optimization and using the procedure explicitly is that you can
     let *Note `myisamchk': myisamchk. allocate much more temporary
     memory for the index creation than you might want the server to
     allocate for index re-creation when it executes the *Note `LOAD
     DATA INFILE': load-data. statement.

     You can also disable or enable the nonunique indexes for a
     `MyISAM' table by using the following statements rather than *Note
     `myisamchk': myisamchk. If you use these statements, you can skip
     the *Note `FLUSH TABLE': flush.  operations:

          ALTER TABLE TBL_NAME DISABLE KEYS;
          ALTER TABLE TBL_NAME ENABLE KEYS;

   * To speed up *Note `INSERT': insert. operations that are performed
     with multiple statements for nontransactional tables, lock your
     tables:

          LOCK TABLES a WRITE;
          INSERT INTO a VALUES (1,23),(2,34),(4,33);
          INSERT INTO a VALUES (8,26),(6,29);
          ...
          UNLOCK TABLES;

     This benefits performance because the index buffer is flushed to
     disk only once, after all *Note `INSERT': insert. statements have
     completed. Normally, there would be as many index buffer flushes
     as there are *Note `INSERT': insert.  statements. Explicit locking
     statements are not needed if you can insert all rows with a single
     *Note `INSERT': insert.

     Locking also lowers the total time for multiple-connection tests,
     although the maximum wait time for individual connections might go
     up because they wait for locks. Suppose that five clients attempt
     to perform inserts simultaneously as follows:

        * Connection 1 does 1000 inserts

        * Connections 2, 3, and 4 do 1 insert

        * Connection 5 does 1000 inserts

     If you do not use locking, connections 2, 3, and 4 finish before 1
     and 5. If you use locking, connections 2, 3, and 4 probably do not
     finish before 1 or 5, but the total time should be about 40%
     faster.

     *Note `INSERT': insert, *Note `UPDATE': update, and *Note
     `DELETE': delete. operations are very fast in MySQL, but you can
     obtain better overall performance by adding locks around
     everything that does more than about five successive inserts or
     updates. If you do very many successive inserts, you could do a
     *Note `LOCK TABLES': lock-tables. followed by an *Note `UNLOCK
     TABLES': lock-tables. once in a while (each 1,000 rows or so) to
     permit other threads to access table. This would still result in a
     nice performance gain.

     *Note `INSERT': insert. is still much slower for loading data than
     *Note `LOAD DATA INFILE': load-data, even when using the
     strategies just outlined.

   * To increase performance for `MyISAM' tables, for both *Note `LOAD
     DATA INFILE': load-data. and *Note `INSERT': insert, enlarge the
     key cache by increasing the `key_buffer_size' system variable. See
     *Note server-parameters::.


File: manual.info,  Node: repair-table-speed,  Prev: optimizing-myisam-bulk-data-loading,  Up: optimizing-myisam

8.6.3 Speed of `REPAIR TABLE' Statements
----------------------------------------

*Note `REPAIR TABLE': repair-table. for `MyISAM' tables is similar to
using *Note `myisamchk': myisamchk. for repair operations, and some of
the same performance optimizations apply:

   * *Note `myisamchk': myisamchk. has variables that control memory
     allocation. You may be able to its improve performance by setting
     these variables, as described in *Note myisamchk-memory::.

   * For *Note `REPAIR TABLE': repair-table, the same principle
     applies, but because the repair is done by the server, you set
     server system variables instead of *Note `myisamchk': myisamchk.
     variables. Also, in addition to setting memory-allocation
     variables, increasing the `myisam_max_sort_file_size' system
     variable increases the likelihood that the repair will use the
     faster filesort method and avoid the slower repair by key cache
     method. Set the variable to the maximum file size for your system,
     after checking to be sure that there is enough free space to hold
     a copy of the table files. The free space must be available in the
     file system containing the original table files.

Suppose that a *Note `myisamchk': myisamchk. table-repair operation is
done using the following options to set its memory-allocation variables:

     --key_buffer_size=128M --myisam_sort_buffer_size=256M
     --read_buffer_size=64M --write_buffer_size=64M

Some of those *Note `myisamchk': myisamchk. variables correspond to
server system variables:

This table lists *Note `myisamchk': myisamchk.  variables and
corresponding server system variables.

*Note `myisamchk': myisamchk.        System Variable
Variable                             
`key_buffer_size'                    `key_buffer_size'
`myisam_sort_buffer_size'            `myisam_sort_buffer_size'
`read_buffer_size'                   `read_buffer_size'
`write_buffer_size'                  none

Each of the server system variables can be set at runtime, and some of
them (`myisam_sort_buffer_size', `read_buffer_size') have a session
value in addition to a global value. Setting a session value limits the
effect of the change to your current session and does not affect other
users. Changing a global-only variable (`key_buffer_size',
`myisam_max_sort_file_size') affects other users as well. For
`key_buffer_size', you must take into account that the buffer is shared
with those users. For example, if you set the *Note `myisamchk':
myisamchk.  `key_buffer_size' variable to 128MB, you could set the
corresponding `key_buffer_size' system variable larger than that (if it
is not already set larger), to permit key buffer use by activity in
other sessions. However, changing the global key buffer size
invalidates the buffer, causing increased disk I/O and slowdown for
other sessions. An alternative that avoids this problem is to use a
separate key cache, assign to it the indexes from the table to be
repaired, and deallocate it when the repair is complete. See *Note
multiple-key-caches::.

Based on the preceding remarks, a *Note `REPAIR TABLE': repair-table.
operation can be done as follows to use settings similar to the *Note
`myisamchk': myisamchk. command. Here a separate 128MB key buffer is
allocated and the file system is assumed to permit a file size of at
least 100GB.

     SET SESSION myisam_sort_buffer_size = 256*1024*1024;
     SET SESSION read_buffer_size = 64*1024*1024;
     SET GLOBAL myisam_max_sort_file_size = 100*1024*1024*1024;
     SET GLOBAL repair_cache.key_buffer_size = 128*1024*1024;
     CACHE INDEX TBL_NAME IN repair_cache;
     LOAD INDEX INTO CACHE TBL_NAME;
     REPAIR TABLE TBL_NAME ;
     SET GLOBAL repair_cache.key_buffer_size = 0;

If you intend to change a global variable but want to do so only for
the duration of a *Note `REPAIR TABLE': repair-table. operation to
minimally affect other users, save its value in a user variable and
restore it afterward. For example:

     SET @old_myisam_sort_buffer_size = @@global.myisam_max_sort_file_size;
     SET GLOBAL myisam_max_sort_file_size = 100*1024*1024*1024;
     REPAIR TABLE tbl_name ;
     SET GLOBAL myisam_max_sort_file_size = @old_myisam_max_sort_file_size;

The system variables that affect *Note `REPAIR TABLE': repair-table.
can be set globally at server startup if you want the values to be in
effect by default. For example, add these lines to the server `my.cnf'
file:

     [mysqld]
     myisam_sort_buffer_size=256M
     key_buffer_size=1G
     myisam_max_sort_file_size=100G

These settings do not include `read_buffer_size'. Setting
`read_buffer_size' globally to a large value does so for all sessions
and can cause performance to suffer due to excessive memory allocation
for a server with many simultaneous sessions.


File: manual.info,  Node: optimizing-memory-tables,  Next: execution-plan-information,  Prev: optimizing-myisam,  Up: optimization

8.7 Optimizing for `MEMORY' Tables
==================================

Consider using `MEMORY' tables for noncritical data that is accessed
often, and is read-only or rarely updated.  Benchmark your application
against equivalent `InnoDB' or `MyISAM' tables under a realistic
workload, to confirm that any additional performance is worth the risk
of losing data, or the overhead of copying data from a disk-based table
at application start.

For best performance with `MEMORY' tables, examine the kinds of queries
against each table, and specify the type to use for each associated
index, either a B-tree index or a hash index. On the *Note `CREATE
INDEX': create-index.  statement, use the clause `USING BTREE' or
`USING HASH'. B-tree indexes are fast for queries that do greater-than
or less-than comparisons through operators such as `>' or `BETWEEN'.
Hash indexes are only fast for queries that look up single values
through the `=' operator, or a restricted set of values through the
`IN' operator. For why `USING BTREE' is often a better choice than the
default `USING HASH', see *Note how-to-avoid-table-scan::. For
implementation details of the different types of `MEMORY' indexes, see
*Note index-btree-hash::.


File: manual.info,  Node: execution-plan-information,  Next: buffering-caching,  Prev: optimizing-memory-tables,  Up: optimization

8.8 Understanding the Query Execution Plan
==========================================

* Menu:

* using-explain::                Optimizing Queries with `EXPLAIN'
* explain-output::               `EXPLAIN' Output Format
* explain-extended::             `EXPLAIN EXTENDED' Output Format
* estimating-performance::       Estimating Query Performance
* controlling-optimizer::        Controlling the Query Optimizer

Depending on the details of your tables, columns, indexes, and the
conditions in your `WHERE' clause, the MySQL optimizer considers many
techniques to efficiently perform the lookups involved in an SQL query.
A query on a huge table can be performed without reading all the rows;
a join involving several tables can be performed without comparing
every combination of rows. The set of operations that the optimizer
chooses to perform the most efficient query is called the `query
execution plan', also known as the *Note `EXPLAIN': explain. plan. Your
goals are to recognize the aspects of the *Note `EXPLAIN': explain.
plan that indicate a query is optimized well, and to learn the SQL
syntax and indexing techniques to improve the plan if you see some
inefficient operations.


File: manual.info,  Node: using-explain,  Next: explain-output,  Prev: execution-plan-information,  Up: execution-plan-information

8.8.1 Optimizing Queries with `EXPLAIN'
---------------------------------------

The *Note `EXPLAIN': explain. statement can be used to obtain
information about how MySQL executes a statement:

   * When you precede a *Note `SELECT': select.  statement with the
     keyword *Note `EXPLAIN': explain, MySQL displays information from
     the optimizer about the statement execution plan. That is, MySQL
     explains how it would process the statement, including information
     about how tables are joined and in which order. For information
     about using *Note `EXPLAIN': explain. to obtain execution plan
     information, see *Note explain-output::.

   * *Note `EXPLAIN EXTENDED': explain-extended. can be used to obtain
     additional execution plan information. See *Note
     explain-extended::.

   * *Note `EXPLAIN PARTITIONS': explain. is useful for examining
     queries involving partitioned tables. See *Note
     partitioning-info::.

With the help of *Note `EXPLAIN': explain, you can see where you should
add indexes to tables so that the statement executes faster by using
indexes to find rows. You can also use *Note `EXPLAIN': explain. to
check whether the optimizer joins the tables in an optimal order. To
give a hint to the optimizer to use a join order corresponding to the
order in which the tables are named in a *Note `SELECT': select.
statement, begin the statement with `SELECT STRAIGHT_JOIN' rather than
just *Note `SELECT': select. (See *Note select::.)

If you have a problem with indexes not being used when you believe that
they should be, run *Note `ANALYZE TABLE': analyze-table. to update
table statistics, such as cardinality of keys, that can affect the
choices the optimizer makes. See *Note analyze-table::.

*Note*:

*Note `EXPLAIN': explain. can also be used to obtain information about
the columns in a table.  *Note `EXPLAIN TBL_NAME': explain. is
synonymous with `DESCRIBE TBL_NAME' and `SHOW COLUMNS FROM TBL_NAME'.
For more information, see *Note describe::, and *Note show-columns::.


File: manual.info,  Node: explain-output,  Next: explain-extended,  Prev: using-explain,  Up: execution-plan-information

8.8.2 `EXPLAIN' Output Format
-----------------------------

The *Note `EXPLAIN': explain. statement provides information about the
execution plan for a *Note `SELECT': select. statement.

*Note `EXPLAIN': explain. returns a row of information for each table
used in the *Note `SELECT': select. statement. It lists the tables in
the output in the order that MySQL would read them while processing the
statement. MySQL resolves all joins using a nested-loop join method.
This means that MySQL reads a row from the first table, and then finds
a matching row in the second table, the third table, and so on. When
all tables are processed, MySQL outputs the selected columns and
backtracks through the table list until a table is found for which there
are more matching rows. The next row is read from this table and the
process continues with the next table.

When the `EXTENDED' keyword is used, *Note `EXPLAIN': explain. produces
extra information that can be viewed by issuing a *Note `SHOW
WARNINGS': show-warnings. statement following the *Note `EXPLAIN':
explain. statement.  *Note `EXPLAIN EXTENDED': explain-extended. also
displays the `filtered' column. See *Note explain-extended::.

*Note*:

You cannot use the `EXTENDED' and `PARTITIONS' keywords together in the
same *Note `EXPLAIN': explain. statement.

   * `EXPLAIN' Output Columns

   * `EXPLAIN' Join Types

   * `EXPLAIN' Extra Information

   * `EXPLAIN' Output Interpretation

* `EXPLAIN' Output Columns *

This section describes the output columns produced by *Note `EXPLAIN':
explain. Later sections provide additional information about the `type'
and `Extra' columns.

Each output row from *Note `EXPLAIN': explain.  provides information
about one table. Each row contains the values summarized in *Note
explain-output-column-table::, and described in more detail following
the table.

*`EXPLAIN' Output Columns*

Column             Meaning
`id'               The `SELECT' identifier
`select_type'      The `SELECT' type
`table'            The table for the output row
`partitions'       The matching partitions
`type'             The join type
`possible_keys'    The possible indexes to choose
`key'              The index actually chosen
`key_len'          The length of the chosen key
`ref'              The columns compared to the index
`rows'             Estimate of rows to be examined
`filtered'         Percentage of rows filtered by table condition
`Extra'            Additional information

   *  `id'

     The *Note `SELECT': select. identifier. This is the sequential
     number of the *Note `SELECT': select. within the query. The value
     can be `NULL' if the row refers to the union result of other rows.
     In this case, the `table' column shows a value like `<unionM,N>'
     to indicate that the row refers to the union of the rows with `id'
     values of M and N.

   *  `select_type'

     The type of *Note `SELECT': select, which can be any of those
     shown in the following table.

     This table lists `select_type' values and describes the meaning of
     each.

     `select_type'     Meaning
     Value             
     `SIMPLE'          Simple *Note `SELECT': select. (not using *Note
                       `UNION': union. or subqueries)
     `PRIMARY'         Outermost *Note `SELECT': select.
     *Note `UNION':    Second or later *Note `SELECT': select. statement
     union.            in a *Note `UNION': union.
     `DEPENDENT UNION' Second or later *Note `SELECT': select. statement
                       in a *Note `UNION': union, dependent on outer
                       query
     `UNION RESULT'    Result of a *Note `UNION': union.
     `SUBQUERY'        First *Note `SELECT': select. in subquery
     `DEPENDENT        First *Note `SELECT': select. in subquery,
     SUBQUERY'         dependent on outer query
     `DERIVED'         Derived table *Note `SELECT': select. (subquery in
                       `FROM' clause)
     `UNCACHEABLE      A subquery for which the result cannot be cached
     SUBQUERY'         and must be re-evaluated for each row of the
                       outer query
     `UNCACHEABLE      The second or later select in a *Note `UNION':
     UNION'            union.  that belongs to an uncacheable subquery
                       (see `UNCACHEABLE SUBQUERY')

     `DEPENDENT' typically signifies the use of a correlated subquery.
     See *Note correlated-subqueries::.

     `DEPENDENT SUBQUERY' evaluation differs from `UNCACHEABLE
     SUBQUERY' evaluation. For `DEPENDENT SUBQUERY', the subquery is
     re-evaluated only once for each set of different values of the
     variables from its outer context. For `UNCACHEABLE SUBQUERY', the
     subquery is re-evaluated for each row of the outer context.

     Cacheability of subqueries differs from caching of query results
     in the query cache (which is described in *Note
     query-cache-operation::). Subquery caching occurs during query
     execution, whereas the query cache is used to store results only
     after query execution finishes.

   *  `table'

     The name of the table to which the row of output refers.  This can
     also be one of the following values:

        * `<unionM,N>': The row refers to the union of the rows with
          `id' values of M and N.

        * `<derivedN>': The row refers to the derived table result for
          the row with an `id' value of N. A derived table may result,
          for example, from a subquery in the `FROM' clause.

   *  `partitions'

     The partitions from which records would be matched by the query.
     This column is displayed only if the `PARTITIONS' keyword is used.
     The value is `NULL' for nonpartitioned tables. See *Note
     partitioning-info::.

   *  `type'

     The join type. For descriptions of the different types, see
     `EXPLAIN' Join Types.

   *  `possible_keys'

     The `possible_keys' column indicates which indexes MySQL can
     choose from use to find the rows in this table. Note that this
     column is totally independent of the order of the tables as
     displayed in the output from *Note `EXPLAIN': explain. That means
     that some of the keys in `possible_keys' might not be usable in
     practice with the generated table order.

     If this column is `NULL', there are no relevant indexes. In this
     case, you may be able to improve the performance of your query by
     examining the `WHERE' clause to check whether it refers to some
     column or columns that would be suitable for indexing. If so,
     create an appropriate index and check the query with *Note
     `EXPLAIN': explain. again. See *Note alter-table::.

     To see what indexes a table has, use `SHOW INDEX FROM TBL_NAME'.

   *  `key'

     The `key' column indicates the key (index) that MySQL actually
     decided to use. If MySQL decides to use one of the `possible_keys'
     indexes to look up rows, that index is listed as the key value.

     It is possible that `key' will name an index that is not present
     in the `possible_keys' value. This can happen if none of the
     `possible_keys' indexes are suitable for looking up rows, but all
     the columns selected by the query are columns of some other index.
     That is, the named index covers the selected columns, so although
     it is not used to determine which rows to retrieve, an index scan
     is more efficient than a data row scan.

     For `InnoDB', a secondary index might cover the selected columns
     even if the query also selects the primary key because `InnoDB'
     stores the primary key value with each secondary index. If `key'
     is `NULL', MySQL found no index to use for executing the query more
     efficiently.

     To force MySQL to use or ignore an index listed in the
     `possible_keys' column, use `FORCE INDEX', `USE INDEX', or `IGNORE
     INDEX' in your query. See *Note index-hints::.

     For `MyISAM' and `NDB' tables, running *Note `ANALYZE TABLE':
     analyze-table.  helps the optimizer choose better indexes. For
     `NDB' tables, this also improves performance of distributed
     pushed-down joins. For `MyISAM' tables, *Note `myisamchk
     --analyze': myisamchk. does the same as *Note `ANALYZE TABLE':
     analyze-table. See *Note myisam-table-maintenance::.

   *  `key_len'

     The `key_len' column indicates the length of the key that MySQL
     decided to use. The length is `NULL' if the `key' column says
     `NULL'. Note that the value of `key_len' enables you to determine
     how many parts of a multiple-part key MySQL actually uses.

   *  `ref'

     The `ref' column shows which columns or constants are compared to
     the index named in the `key' column to select rows from the table.

   *  `rows'

     The `rows' column indicates the number of rows MySQL believes it
     must examine to execute the query.

     For *Note `InnoDB': innodb-storage-engine. tables, this number is
     an estimate, and may not always be exact.

   *  `filtered'

     The `filtered' column indicates an estimated percentage of table
     rows that will be filtered by the table condition. That is, `rows'
     shows the estimated number of rows examined and `rows' x `filtered'
     / `100' shows the number of rows that will be joined with previous
     tables. This column is displayed if you use *Note `EXPLAIN
     EXTENDED': explain-extended.

   *  `Extra'

     This column contains additional information about how MySQL
     resolves the query. For descriptions of the different values, see
     `EXPLAIN' Extra Information.

* `EXPLAIN' Join Types *

The `type' column of *Note `EXPLAIN': explain. output describes how
tables are joined. The following list describes the join types, ordered
from the best type to the worst:

   *  `system'

     The table has only one row (= system table). This is a special
     case of the `const' join type.

   *  `const'

     The table has at most one matching row, which is read at the start
     of the query. Because there is only one row, values from the
     column in this row can be regarded as constants by the rest of the
     optimizer.  `const' tables are very fast because they are read
     only once.

     `const' is used when you compare all parts of a `PRIMARY KEY' or
     `UNIQUE' index to constant values. In the following queries,
     TBL_NAME can be used as a `const' table:

          SELECT * FROM TBL_NAME WHERE PRIMARY_KEY=1;

          SELECT * FROM TBL_NAME
            WHERE PRIMARY_KEY_PART1=1 AND PRIMARY_KEY_PART2=2;

   *  `eq_ref'

     One row is read from this table for each combination of rows from
     the previous tables. Other than the `system' and `const' types,
     this is the best possible join type. It is used when all parts of
     an index are used by the join and the index is a `PRIMARY KEY' or
     `UNIQUE NOT NULL' index.

     `eq_ref' can be used for indexed columns that are compared using
     the `=' operator. The comparison value can be a constant or an
     expression that uses columns from tables that are read before this
     table. In the following examples, MySQL can use an `eq_ref' join to
     process REF_TABLE:

          SELECT * FROM REF_TABLE,OTHER_TABLE
            WHERE REF_TABLE.KEY_COLUMN=OTHER_TABLE.COLUMN;

          SELECT * FROM REF_TABLE,OTHER_TABLE
            WHERE REF_TABLE.KEY_COLUMN_PART1=OTHER_TABLE.COLUMN
            AND REF_TABLE.KEY_COLUMN_PART2=1;

   *  `ref'

     All rows with matching index values are read from this table for
     each combination of rows from the previous tables.  `ref' is used
     if the join uses only a leftmost prefix of the key or if the key
     is not a `PRIMARY KEY' or `UNIQUE' index (in other words, if the
     join cannot select a single row based on the key value). If the
     key that is used matches only a few rows, this is a good join type.

     `ref' can be used for indexed columns that are compared using the
     `=' or `<=>' operator. In the following examples, MySQL can use a
     `ref' join to process REF_TABLE:

          SELECT * FROM REF_TABLE WHERE KEY_COLUMN=EXPR;

          SELECT * FROM REF_TABLE,OTHER_TABLE
            WHERE REF_TABLE.KEY_COLUMN=OTHER_TABLE.COLUMN;

          SELECT * FROM REF_TABLE,OTHER_TABLE
            WHERE REF_TABLE.KEY_COLUMN_PART1=OTHER_TABLE.COLUMN
            AND REF_TABLE.KEY_COLUMN_PART2=1;

   *  `fulltext'

     The join is performed using a `FULLTEXT' index.

   *  `ref_or_null'

     This join type is like `ref', but with the addition that MySQL
     does an extra search for rows that contain `NULL' values. This
     join type optimization is used most often in resolving subqueries.
     In the following examples, MySQL can use a `ref_or_null' join to
     process REF_TABLE:

          SELECT * FROM REF_TABLE
            WHERE KEY_COLUMN=EXPR OR KEY_COLUMN IS NULL;

     See *Note is-null-optimization::.

   *  `index_merge'

     This join type indicates that the Index Merge optimization is
     used. In this case, the `key' column in the output row contains a
     list of indexes used, and `key_len' contains a list of the longest
     key parts for the indexes used. For more information, see *Note
     index-merge-optimization::.

   *  `unique_subquery'

     This type replaces `ref' for some `IN' subqueries of the following
     form:

          VALUE IN (SELECT PRIMARY_KEY FROM SINGLE_TABLE WHERE SOME_EXPR)

     `unique_subquery' is just an index lookup function that replaces
     the subquery completely for better efficiency.

   *  `index_subquery'

     This join type is similar to `unique_subquery'. It replaces `IN'
     subqueries, but it works for nonunique indexes in subqueries of
     the following form:

          VALUE IN (SELECT KEY_COLUMN FROM SINGLE_TABLE WHERE SOME_EXPR)

   *  `range'

     Only rows that are in a given range are retrieved, using an index
     to select the rows. The `key' column in the output row indicates
     which index is used. The `key_len' contains the longest key part
     that was used. The `ref' column is `NULL' for this type.

     `range' can be used when a key column is compared to a constant
     using any of the `=', `<>', `>', `>=', `<', `<=', `IS NULL', `<=>',
     `BETWEEN', or `IN()' operators:

          SELECT * FROM TBL_NAME
            WHERE KEY_COLUMN = 10;

          SELECT * FROM TBL_NAME
            WHERE KEY_COLUMN BETWEEN 10 and 20;

          SELECT * FROM TBL_NAME
            WHERE KEY_COLUMN IN (10,20,30);

          SELECT * FROM TBL_NAME
            WHERE KEY_PART1 = 10 AND KEY_PART2 IN (10,20,30);

   *  `index'

     The `index' join type is the same as `ALL', except that the index
     tree is scanned. This occurs two ways:

        * If the index is a covering index for the queries and can be
          used to satisfy all data required from the table, only the
          index tree is scanned. In this case, the `Extra' column says
          `Using index'. An index-only scan usually is faster than
          `ALL' because the size of the index usually is smaller than
          the table data.

        * A full table scan is performed using reads from the index to
          look up data rows in index order. `Uses index' does not
          appear in the `Extra' column.

     MySQL can use this join type when the query uses only columns that
     are part of a single index.

   *  `ALL'

     A full table scan is done for each combination of rows from the
     previous tables. This is normally not good if the table is the
     first table not marked `const', and usually _very_ bad in all
     other cases. Normally, you can avoid `ALL' by adding indexes that
     enable row retrieval from the table based on constant values or
     column values from earlier tables.

* `EXPLAIN' Extra Information *

The `Extra' column of *Note `EXPLAIN': explain. output contains
additional information about how MySQL resolves the query. The
following list explains the values that can appear in this column. If
you want to make your queries as fast as possible, look out for `Extra'
values of `Using filesort' and `Using temporary'.

   * `Child of 'TABLE' pushed join@1'

     This table is referenced as the child of TABLE in a join that can
     be pushed down to the NDB kernel. Applies only in MySQL Cluster
     NDB 7.2 and later, when pushed-down joins are enabled. See the
     description of the `ndb_join_pushdown' server system variable for
     more information and examples.

   * `const row not found'

     For a query such as `SELECT ... FROM TBL_NAME', the table was
     empty.

   * `Distinct'

     MySQL is looking for distinct values, so it stops searching for
     more rows for the current row combination after it has found the
     first matching row.

   * `Full scan on NULL key'

     This occurs for subquery optimization as a fallback strategy when
     the optimizer cannot use an index-lookup access method.

   * `Impossible HAVING'

     The `HAVING' clause is always false and cannot select any rows.

   * `Impossible WHERE'

     The `WHERE' clause is always false and cannot select any rows.

   * `Impossible WHERE noticed after reading const tables'

     MySQL has read all `const' (and `system') tables and notice that
     the `WHERE' clause is always false.

   * `No matching min/max row'

     No row satisfies the condition for a query such as `SELECT
     MIN(...) FROM ... WHERE CONDITION'.

   * `no matching row in const table'

     For a query with a join, there was an empty table or a table with
     no rows satisfying a unique index condition.

   * `No tables used'

     The query has no `FROM' clause, or has a `FROM DUAL' clause.

   * `Not exists'

     MySQL was able to do a `LEFT JOIN' optimization on the query and
     does not examine more rows in this table for the previous row
     combination after it finds one row that matches the `LEFT JOIN'
     criteria. Here is an example of the type of query that can be
     optimized this way:

          SELECT * FROM t1 LEFT JOIN t2 ON t1.id=t2.id
            WHERE t2.id IS NULL;

     Assume that `t2.id' is defined as `NOT NULL'. In this case, MySQL
     scans `t1' and looks up the rows in `t2' using the values of
     `t1.id'. If MySQL finds a matching row in `t2', it knows that
     `t2.id' can never be `NULL', and does not scan through the rest of
     the rows in `t2' that have the same `id' value. In other words,
     for each row in `t1', MySQL needs to do only a single lookup in
     `t2', regardless of how many rows actually match in `t2'.

   * `Range checked for each record (index map: N)'

     MySQL found no good index to use, but found that some of indexes
     might be used after column values from preceding tables are known.
     For each row combination in the preceding tables, MySQL checks
     whether it is possible to use a `range' or `index_merge' access
     method to retrieve rows. This is not very fast, but is faster than
     performing a join with no index at all. The applicability criteria
     are as described in *Note range-optimization::, and *Note
     index-merge-optimization::, with the exception that all column
     values for the preceding table are known and considered to be
     constants.

     Indexes are numbered beginning with 1, in the same order as shown
     by *Note `SHOW INDEX': show-index. for the table. The index map
     value N is a bitmask value that indicates which indexes are
     candidates.  For example, a value of `0x19' (binary 11001) means
     that indexes 1, 4, and 5 will be considered.

   * `Scanned N databases'

     This indicates how many directory scans the server performs when
     processing a query for `INFORMATION_SCHEMA' tables, as described
     in *Note information-schema-optimization::. The value of N can be
     0, 1, or `all'.

   * `Select tables optimized away'

     The query contained only aggregate functions (`MIN()', `MAX()')
     that were all resolved using an index, or `COUNT(*)' for `MyISAM',
     and no `GROUP BY' clause. The optimizer determined that only one
     row should be returned.

   * `Skip_open_table', `Open_frm_only', `Open_trigger_only',
     `Open_full_table'

     These values indicate file-opening optimizations that apply to
     queries for `INFORMATION_SCHEMA' tables, as described in *Note
     information-schema-optimization::.

        * `Skip_open_table': Table files do not need to be opened. The
          information has already become available within the query by
          scanning the database directory.

        * `Open_frm_only': Only the table's `.frm' file need be opened.

        * `Open_trigger_only': Only the table's `.TRG' file need be
          opened.

        * `Open_full_table': The unoptimized information lookup. The
          `.frm', `.MYD', and `.MYI' files must be opened.

   * `unique row not found'

     For a query such as `SELECT ... FROM TBL_NAME', no rows satisfy
     the condition for a `UNIQUE' index or `PRIMARY KEY' on the table.

   * `Using filesort'

     MySQL must do an extra pass to find out how to retrieve the rows
     in sorted order. The sort is done by going through all rows
     according to the join type and storing the sort key and pointer to
     the row for all rows that match the `WHERE' clause. The keys then
     are sorted and the rows are retrieved in sorted order. See *Note
     order-by-optimization::.

   * `Using index'

     The column information is retrieved from the table using only
     information in the index tree without having to do an additional
     seek to read the actual row. This strategy can be used when the
     query uses only columns that are part of a single index.

     If the `Extra' column also says `Using where', it means the index
     is being used to perform lookups of key values. Without `Using
     where', the optimizer may be reading the index to avoid reading
     data rows but not using it for lookups. For example, if the index
     is a covering index for the query, the optimizer may scan it
     without using it for lookups.

     For `InnoDB' tables that have a user-defined clustered index, that
     index can be used even when `Using index' is absent from the
     `Extra' column. This is the case if `type' is `index' and `key' is
     `PRIMARY'.

   * `Using index for group-by'

     Similar to the `Using index' table access method, `Using index for
     group-by' indicates that MySQL found an index that can be used to
     retrieve all columns of a `GROUP BY' or `DISTINCT' query without
     any extra disk access to the actual table. Additionally, the index
     is used in the most efficient way so that for each group, only a
     few index entries are read. For details, see *Note
     group-by-optimization::.

   * `Using join buffer'

     Tables from earlier joins are read in portions into the join
     buffer, and then their rows are used from the buffer to perform
     the join with the current table.

   * `Using sort_union(...)', `Using union(...)', `Using intersect(...)'

     These indicate how index scans are merged for the `index_merge'
     join type.  See *Note index-merge-optimization::.

   * `Using temporary'

     To resolve the query, MySQL needs to create a temporary table to
     hold the result. This typically happens if the query contains
     `GROUP BY' and `ORDER BY' clauses that list columns differently.

   * `Using where'

     A `WHERE' clause is used to restrict which rows to match against
     the next table or send to the client.  Unless you specifically
     intend to fetch or examine all rows from the table, you may have
     something wrong in your query if the `Extra' value is not `Using
     where' and the table join type is `ALL' or `index'. Even if you are
     using an index for all parts of a `WHERE' clause, you may see
     `Using where' if the column can be `NULL'.

   * `Using where with pushed condition'

     This item applies to *Note `NDBCLUSTER': mysql-cluster.  tables
     _only_. It means that MySQL Cluster is using the Condition
     Pushdown optimization to improve the efficiency of a direct
     comparison between a nonindexed column and a constant. In such
     cases, the condition is `pushed down' to the cluster's data nodes
     and is evaluated on all data nodes simultaneously. This eliminates
     the need to send nonmatching rows over the network, and can speed
     up such queries by a factor of 5 to 10 times over cases where
     Condition Pushdown could be but is not used. For more information,
     see *Note condition-pushdown-optimization::.

* `EXPLAIN' Output Interpretation *

You can get a good indication of how good a join is by taking the
product of the values in the `rows' column of the *Note `EXPLAIN':
explain. output. This should tell you roughly how many rows MySQL must
examine to execute the query. If you restrict queries with the
`max_join_size' system variable, this row product also is used to
determine which multiple-table *Note `SELECT': select. statements to
execute and which to abort. See *Note server-parameters::.

The following example shows how a multiple-table join can be optimized
progressively based on the information provided by *Note `EXPLAIN':
explain.

Suppose that you have the *Note `SELECT': select.  statement shown here
and that you plan to examine it using *Note `EXPLAIN': explain.:

     EXPLAIN SELECT tt.TicketNumber, tt.TimeIn,
                    tt.ProjectReference, tt.EstimatedShipDate,
                    tt.ActualShipDate, tt.ClientID,
                    tt.ServiceCodes, tt.RepetitiveID,
                    tt.CurrentProcess, tt.CurrentDPPerson,
                    tt.RecordVolume, tt.DPPrinted, et.COUNTRY,
                    et_1.COUNTRY, do.CUSTNAME
             FROM tt, et, et AS et_1, do
             WHERE tt.SubmitTime IS NULL
               AND tt.ActualPC = et.EMPLOYID
               AND tt.AssignedPC = et_1.EMPLOYID
               AND tt.ClientID = do.CUSTNMBR;

For this example, make the following assumptions:

   * The columns being compared have been declared as follows.

     This table outlines table names, column names, and data types for
     the columns being compared in the `EXPLAIN' example described in
     the preceding text.

     Table   Column            Data Type
     `tt'    `ActualPC'        `CHAR(10)'
     `tt'    `AssignedPC'      `CHAR(10)'
     `tt'    `ClientID'        `CHAR(10)'
     `et'    `EMPLOYID'        `CHAR(15)'
     `do'    `CUSTNMBR'        `CHAR(15)'

   * The tables have the following indexes.

     This table lists indexes for each of the tables that are part of
     the `EXPLAIN' example described in the preceding text.

     Table   Index
     `tt'    `ActualPC'
     `tt'    `AssignedPC'
     `tt'    `ClientID'
     `et'    `EMPLOYID' (primary key)
     `do'    `CUSTNMBR' (primary key)

   * The `tt.ActualPC' values are not evenly distributed.

Initially, before any optimizations have been performed, the *Note
`EXPLAIN': explain. statement produces the following information:

     table type possible_keys key  key_len ref  rows  Extra
     et    ALL  PRIMARY       NULL NULL    NULL 74
     do    ALL  PRIMARY       NULL NULL    NULL 2135
     et_1  ALL  PRIMARY       NULL NULL    NULL 74
     tt    ALL  AssignedPC,   NULL NULL    NULL 3872
                ClientID,
                ActualPC
           Range checked for each record (index map: 0x23)

Because `type' is `ALL' for each table, this output indicates that
MySQL is generating a Cartesian product of all the tables; that is,
every combination of rows. This takes quite a long time, because the
product of the number of rows in each table must be examined. For the
case at hand, this product is 74 x 2135 x 74 x 3872 = 45,268,558,720
rows. If the tables were bigger, you can only imagine how long it would
take.

One problem here is that MySQL can use indexes on columns more
efficiently if they are declared as the same type and size. In this
context, *Note `VARCHAR': char. and *Note `CHAR': char. are considered
the same if they are declared as the same size.  `tt.ActualPC' is
declared as `CHAR(10)' and `et.EMPLOYID' is `CHAR(15)', so there is a
length mismatch.

To fix this disparity between column lengths, use *Note `ALTER TABLE':
alter-table. to lengthen `ActualPC' from 10 characters to 15 characters:

     mysql> ALTER TABLE tt MODIFY ActualPC VARCHAR(15);

Now `tt.ActualPC' and `et.EMPLOYID' are both `VARCHAR(15)'. Executing
the *Note `EXPLAIN': explain. statement again produces this result:

     table type   possible_keys key     key_len ref         rows    Extra
     tt    ALL    AssignedPC,   NULL    NULL    NULL        3872    Using
                  ClientID,                                         where
                  ActualPC
     do    ALL    PRIMARY       NULL    NULL    NULL        2135
           Range checked for each record (index map: 0x1)
     et_1  ALL    PRIMARY       NULL    NULL    NULL        74
           Range checked for each record (index map: 0x1)
     et    eq_ref PRIMARY       PRIMARY 15      tt.ActualPC 1

This is not perfect, but is much better: The product of the `rows'
values is less by a factor of 74. This version executes in a couple of
seconds.

A second alteration can be made to eliminate the column length
mismatches for the `tt.AssignedPC = et_1.EMPLOYID' and `tt.ClientID =
do.CUSTNMBR' comparisons:

     mysql> ALTER TABLE tt MODIFY AssignedPC VARCHAR(15),
         ->                MODIFY ClientID   VARCHAR(15);

After that modification, *Note `EXPLAIN': explain.  produces the output
shown here:

     table type   possible_keys key      key_len ref           rows Extra
     et    ALL    PRIMARY       NULL     NULL    NULL          74
     tt    ref    AssignedPC,   ActualPC 15      et.EMPLOYID   52   Using
                  ClientID,                                         where
                  ActualPC
     et_1  eq_ref PRIMARY       PRIMARY  15      tt.AssignedPC 1
     do    eq_ref PRIMARY       PRIMARY  15      tt.ClientID   1

At this point, the query is optimized almost as well as possible. The
remaining problem is that, by default, MySQL assumes that values in the
`tt.ActualPC' column are evenly distributed, and that is not the case
for the `tt' table. Fortunately, it is easy to tell MySQL to analyze
the key distribution:

     mysql> ANALYZE TABLE tt;

With the additional index information, the join is perfect and *Note
`EXPLAIN': explain. produces this result:

     table type   possible_keys key     key_len ref           rows Extra
     tt    ALL    AssignedPC    NULL    NULL    NULL          3872 Using
                  ClientID,                                        where
                  ActualPC
     et    eq_ref PRIMARY       PRIMARY 15      tt.ActualPC   1
     et_1  eq_ref PRIMARY       PRIMARY 15      tt.AssignedPC 1
     do    eq_ref PRIMARY       PRIMARY 15      tt.ClientID   1

Note that the `rows' column in the output from *Note `EXPLAIN':
explain. is an educated guess from the MySQL join optimizer. Check
whether the numbers are even close to the truth by comparing the `rows'
product with the actual number of rows that the query returns.  If the
numbers are quite different, you might get better performance by using
`STRAIGHT_JOIN' in your *Note `SELECT': select. statement and trying to
list the tables in a different order in the `FROM' clause.

It is possible in some cases to execute statements that modify data
when *Note `EXPLAIN SELECT': explain. is used with a subquery; for more
information, see *Note from-clause-subqueries::.


File: manual.info,  Node: explain-extended,  Next: estimating-performance,  Prev: explain-output,  Up: execution-plan-information

8.8.3 `EXPLAIN EXTENDED' Output Format
--------------------------------------

When *Note `EXPLAIN': explain. is used with the `EXTENDED' keyword, the
output includes a `filtered' column not otherwise displayed. This
column indicates the estimated percentage of table rows that will be
filtered by the table condition. In addition, the statement produces
extra information that can be viewed by issuing a *Note `SHOW
WARNINGS': show-warnings. statement following the *Note `EXPLAIN':
explain. statement.  The `Message' value in *Note `SHOW WARNINGS':
show-warnings. output displays how the optimizer qualifies table and
column names in the *Note `SELECT': select. statement, what the *Note
`SELECT': select. looks like after the application of rewriting and
optimization rules, and possibly other notes about the optimization
process. Here is an example:

     mysql> EXPLAIN EXTENDED
         -> SELECT t1.a, t1.a IN (SELECT t2.a FROM t2) FROM t1\G
     *************************** 1. row ***************************
                id: 1
       select_type: PRIMARY
             table: t1
              type: index
     possible_keys: NULL
               key: PRIMARY
           key_len: 4
               ref: NULL
              rows: 4
          filtered: 100.00
             Extra: Using index
     *************************** 2. row ***************************
                id: 2
       select_type: DEPENDENT SUBQUERY
             table: t2
              type: index_subquery
     possible_keys: a
               key: a
           key_len: 5
               ref: func
              rows: 2
          filtered: 100.00
             Extra: Using index
     2 rows in set, 1 warning (0.00 sec)

     mysql> SHOW WARNINGS\G
     *************************** 1. row ***************************
       Level: Note
        Code: 1003
     Message: select `test`.`t1`.`a` AS `a`,
              <in_optimizer>(`test`.`t1`.`a`,
              <exists>(<index_lookup>(<cache>(`test`.`t1`.`a`)
              in t2 on a checking NULL having
              <is_not_null_test>(`test`.`t2`.`a`)))) AS `t1.a
              IN (SELECT t2.a FROM t2)` from `test`.`t1`
     1 row in set (0.00 sec)

Because the statement displayed by *Note `SHOW WARNINGS':
show-warnings. may contain special markers to provide information about
query rewriting or optimizer actions, the statement is not necessarily
valid SQL and is not intended to be executed. The output may also
include rows with `Message' values that provide additional non-SQL
explanatory notes about actions taken by the optimizer.

The following list describes special markers that can appear in
`EXTENDED' output displayed by *Note `SHOW WARNINGS': show-warnings.:

   * `<cache>(EXPR)'

     The expression (such as a scalar subquery) is executed once and
     the resulting value is saved in memory for later use.

   * `<exists>(QUERY FRAGMENT)'

     The subquery predicate is converted to an `EXISTS' predicate and
     the subquery is transformed so that it can be used together with
     the `EXISTS' predicate.

   * `<in_optimizer>(QUERY FRAGMENT)'

     This is an internal optimizer object with no user significance.

   * `<index_lookup>(QUERY FRAGMENT)'

     The query fragment is processed using an index lookup to find
     qualifying rows.

   * `<is_not_null_test>(EXPR)'

     A test to verify that the expression does not evaluate to `NULL'.

   * `<primary_index_lookup>(QUERY FRAGMENT)'

     The query fragment is processed using a primary key lookup to find
     qualifying rows.

   * `<ref_null_helper>(EXPR)'

     This is an internal optimizer object with no user significance.


File: manual.info,  Node: estimating-performance,  Next: controlling-optimizer,  Prev: explain-extended,  Up: execution-plan-information

8.8.4 Estimating Query Performance
----------------------------------

In most cases, you can estimate query performance by counting disk
seeks. For small tables, you can usually find a row in one disk seek
(because the index is probably cached). For bigger tables, you can
estimate that, using B-tree indexes, you need this many seeks to find a
row: `log(ROW_COUNT) / log(INDEX_BLOCK_LENGTH / 3 * 2 / (INDEX_LENGTH +
DATA_POINTER_LENGTH)) + 1'.

In MySQL, an index block is usually 1,024 bytes and the data pointer is
usually four bytes. For a 500,000-row table with a key value length of
three bytes (the size of *Note `MEDIUMINT': integer-types.), the
formula indicates `log(500,000)/log(1024/3*2/(3+4)) + 1' = `4' seeks.

This index would require storage of about 500,000 * 7 * 3/2 = 5.2MB
(assuming a typical index buffer fill ratio of 2/3), so you probably
have much of the index in memory and so need only one or two calls to
read data to find the row.

For writes, however, you need four seek requests to find where to place
a new index value and normally two seeks to update the index and write
the row.

Note that the preceding discussion does not mean that your application
performance slowly degenerates by log N. As long as everything is
cached by the OS or the MySQL server, things become only marginally
slower as the table gets bigger. After the data gets too big to be
cached, things start to go much slower until your applications are
bound only by disk seeks (which increase by log N). To avoid this,
increase the key cache size as the data grows. For `MyISAM' tables, the
key cache size is controlled by the `key_buffer_size' system variable.
See *Note server-parameters::.


File: manual.info,  Node: controlling-optimizer,  Prev: estimating-performance,  Up: execution-plan-information

8.8.5 Controlling the Query Optimizer
-------------------------------------

* Menu:

* controlling-query-plan-evaluation::  Controlling Query Plan Evaluation
* switchable-optimizations::     Controlling Switchable Optimizations

MySQL provides optimizer control through system variables that affect
how query plans are evaluated and which switchable optimizations are
enabled.


File: manual.info,  Node: controlling-query-plan-evaluation,  Next: switchable-optimizations,  Prev: controlling-optimizer,  Up: controlling-optimizer

8.8.5.1 Controlling Query Plan Evaluation
.........................................

The task of the query optimizer is to find an optimal plan for
executing an SQL query. Because the difference in performance between
`good' and `bad' plans can be orders of magnitude (that is, seconds
versus hours or even days), most query optimizers, including that of
MySQL, perform a more or less exhaustive search for an optimal plan
among all possible query evaluation plans. For join queries, the number
of possible plans investigated by the MySQL optimizer grows
exponentially with the number of tables referenced in a query.  For
small numbers of tables (typically less than 7 to 10) this is not a
problem. However, when larger queries are submitted, the time spent in
query optimization may easily become the major bottleneck in the
server's performance.

A more flexible method for query optimization enables the user to
control how exhaustive the optimizer is in its search for an optimal
query evaluation plan. The general idea is that the fewer plans that
are investigated by the optimizer, the less time it spends in compiling
a query. On the other hand, because the optimizer skips some plans, it
may miss finding an optimal plan.

The behavior of the optimizer with respect to the number of plans it
evaluates can be controlled using two system variables:

   * The `optimizer_prune_level' variable tells the optimizer to skip
     certain plans based on estimates of the number of rows accessed
     for each table. Our experience shows that this kind of `educated
     guess' rarely misses optimal plans, and may dramatically reduce
     query compilation times. That is why this option is on
     (`optimizer_prune_level=1') by default.  However, if you believe
     that the optimizer missed a better query plan, this option can be
     switched off (`optimizer_prune_level=0') with the risk that query
     compilation may take much longer. Note that, even with the use of
     this heuristic, the optimizer still explores a roughly exponential
     number of plans.

   * The `optimizer_search_depth' variable tells how far into the
     `future' of each incomplete plan the optimizer should look to
     evaluate whether it should be expanded further. Smaller values of
     `optimizer_search_depth' may result in orders of magnitude smaller
     query compilation times. For example, queries with 12, 13, or more
     tables may easily require hours and even days to compile if
     `optimizer_search_depth' is close to the number of tables in the
     query. At the same time, if compiled with `optimizer_search_depth'
     equal to 3 or 4, the optimizer may compile in less than a minute
     for the same query. If you are unsure of what a reasonable value
     is for `optimizer_search_depth', this variable can be set to 0 to
     tell the optimizer to determine the value automatically.


File: manual.info,  Node: switchable-optimizations,  Prev: controlling-query-plan-evaluation,  Up: controlling-optimizer

8.8.5.2 Controlling Switchable Optimizations
............................................

The `optimizer_switch' system variable enables control over optimizer
behavior. Its value is a set of flags, each of which has a value of
`on' or `off' to indicate whether the corresponding optimizer behavior
is enabled or disabled. This variable has global and session values and
can be changed at runtime. The global default can be set at server
startup.

To see the current set of optimizer flags, select the variable value:

     mysql> SELECT @@optimizer_switch\G
     *************************** 1. row ***************************
     @@optimizer_switch: index_merge=on,index_merge_union=on,
                         index_merge_sort_union=on,
                         index_merge_intersection=on,
                         engine_condition_pushdown=on

To change the value of `optimizer_switch', assign a value consisting of
a comma-separated list of one or more commands:

     SET [GLOBAL|SESSION] optimizer_switch='COMMAND[,COMMAND]...';

Each COMMAND value should have one of the forms shown in the following
table.

This table describes the syntax of the COMMAND value for SET
`optimizer_switch' commands.

Command Syntax     Meaning
`default'          Reset every optimization to its default value
`OPT_NAME=default' Set the named optimization to its default value
`OPT_NAME=off'     Disable the named optimization
`OPT_NAME=on'      Enable the named optimization

The order of the commands in the value does not matter, although the
`default' command is executed first if present. Setting an OPT_NAME
flag to `default' sets it to whichever of `on' or `off' is its default
value. Specifying any given OPT_NAME more than once in the value is not
permitted and causes an error. Any errors in the value cause the
assignment to fail with an error, leaving the value of
`optimizer_switch' unchanged.

The following table lists the permissible OPT_NAME flag names, grouped
by optimization strategy.

This table lists permissible OPT_NAME flag names, grouped by
optimization strategy.

Optimization       Flag Name                 Meaning
Engine Condition   `engine_condition_pushdown'Controls engine condition
Pushdown                                     pushdown
Index Merge        `index_merge'             Controls all Index Merge
                                             optimizations
                   `index_merge_intersection'Controls the Index Merge
                                             Intersection Access
                                             optimization
                   `index_merge_sort_union'  Controls the Index Merge
                                             Sort-Union Access
                                             optimization
                   `index_merge_union'       Controls the Index Merge
                                             Union Access optimization

The flag for engine condition pushdown was added in MySQL 5.5.3.

For more information about individual optimization strategies, see the
following sections:

   * *Note condition-pushdown-optimization::

   * *Note index-merge-optimization::

When you assign a value to `optimizer_switch', flags that are not
mentioned keep their current values. This makes it possible to enable
or disable specific optimizer behaviors in a single statement without
affecting other behaviors. The statement does not depend on what other
optimizer flags exist and what their values are. Suppose that all Index
Merge optimizations are enabled:

     mysql> SELECT @@optimizer_switch\G
     *************************** 1. row ***************************
     @@optimizer_switch: index_merge=on,index_merge_union=on,
                         index_merge_sort_union=on,
                         index_merge_intersection=on,
                         engine_condition_pushdown=on

If the server is using the Index Merge Union or Index Merge Sort-Union
access methods for certain queries and you want to check whether the
optimizer will perform better without them, set the variable value like
this:

     mysql> SET optimizer_switch='index_merge_union=off,index_merge_sort_union=off';

     mysql> SELECT @@optimizer_switch\G
     *************************** 1. row ***************************
     @@optimizer_switch: index_merge=on,index_merge_union=off,
                         index_merge_sort_union=off,
                         index_merge_intersection=on,
                         engine_condition_pushdown=on


File: manual.info,  Node: buffering-caching,  Next: locking-issues,  Prev: execution-plan-information,  Up: optimization

8.9 Buffering and Caching
=========================

* Menu:

* innodb-buffer-pool::           The `InnoDB' Buffer Pool
* myisam-key-cache::             The `MyISAM' Key Cache
* query-cache::                  The MySQL Query Cache

MySQL uses several strategies that cache information in memory buffers
to increase performance. Depending on your database architecture, you
balance the size and layout of these areas, to provide the most
performance benefit without wasting memory or exceeding available
memory. When you set up or resize these memory areas, test the
resulting performance using the techniques from *Note
optimize-benchmarking::.


File: manual.info,  Node: innodb-buffer-pool,  Next: myisam-key-cache,  Prev: buffering-caching,  Up: buffering-caching

8.9.1 The `InnoDB' Buffer Pool
------------------------------

*Note `InnoDB': innodb-storage-engine. maintains a storage area called
the buffer pool for caching data and indexes in memory. Knowing how the
`InnoDB' buffer pool works, and taking advantage of it to keep
frequently accessed data in memory, is an important aspect of MySQL
tuning.

* Guidelines *

Ideally, you set the size of the buffer pool to as large a value as
practical, leaving enough memory for other processes on the server to
run without excessive paging. The larger the buffer pool, the more
`InnoDB' acts like an in-memory database, reading data from disk once
and then accessing the data from memory during subsequent reads. The
buffer pool even caches data changed by insert and update operations,
so that disk writes can be grouped together for better performance.

Depending on the typical workload on your system, you might adjust the
proportions of the parts within the buffer pool. You can tune the way
the buffer pool chooses which blocks to cache once it fills up, to keep
frequently accessed data in memory despite sudden spikes of activity
for operations such as backups or reporting.

With 64-bit systems with large memory sizes, you can split the buffer
pool into multiple parts, to minimize contention for the memory
structures among concurrent operations. For details, see *Note
innodb-multiple-buffer-pools::.

* Internal Details *

`InnoDB' manages the pool as a list, using a variation of the least
recently used (LRU) algorithm. When room is needed to add a new block
to the pool, `InnoDB' evicts the least recently used block and adds the
new block to the middle of the list. This `midpoint insertion strategy'
treats the list as two sublists:

   * At the head, a sublist of `new' (or `young') blocks that were
     accessed recently.

   * At the tail, a sublist of `old' blocks that were accessed less
     recently.

This algorithm keeps blocks that are heavily used by queries in the new
sublist. The old sublist contains less-used blocks; these blocks are
candidates for eviction.

The LRU algorithm operates as follows by default:

   * 3/8 of the buffer pool is devoted to the old sublist.

   * The midpoint of the list is the boundary where the tail of the new
     sublist meets the head of the old sublist.

   * When `InnoDB' reads a block into the buffer pool, it initially
     inserts it at the midpoint (the head of the old sublist). A block
     can be read in because it is required for a user-specified
     operation such as an SQL query, or as part of a read-ahead
     operation performed automatically by `InnoDB'.

   * Accessing to a block in the old sublist makes it `young', moving
     it to the head of the buffer pool (the head of the new sublist).
     If the block was read in because it was required, the first access
     occurs immediately and the block is made young. If the block was
     read in due to read-ahead, the first access does not occur
     immediately (and might not occur at all before the block is
     evicted).

   * As the database operates, blocks in the buffer pool that are not
     accessed `age' by moving toward the tail of the list. Blocks in
     both the new and old sublists age as other blocks are made new.
     Blocks in the old sublist also age as blocks are inserted at the
     midpoint. Eventually, a block that remains unused for long enough
     reaches the tail of the old sublist and is evicted.

By default, blocks read by queries immediately move into the new
sublist, meaning they will stay in the buffer pool for a long time. A
table scan (such as performed for a *Note `mysqldump': mysqldump.
operation, or a `SELECT' statement with no `WHERE' clause) can bring a
large amount of data into the buffer pool and evict an equivalent
amount of older data, even if the new data is never used again.
Similarly, blocks that are loaded by the read-ahead background thread
and then accessed only once move to the head of the new list. These
situations can push frequently used blocks to the old sublist, where
they become subject to eviction.

* Configuration Options *

Several `InnoDB' system variables control the size of the buffer pool
and let you tune the LRU algorithm:

   * `innodb_buffer_pool_size'

     Specifies the size of the buffer pool. If your buffer pool is
     small and you have sufficient memory, making the pool larger can
     improve performance by reducing the amount of disk I/O needed as
     queries access *Note `InnoDB': innodb-storage-engine. tables.

   * `innodb_buffer_pool_instances'

     Divides the buffer pool into a user-specified number of separate
     regions, each with its own LRU list and related data structures,
     to reduce contention during concurrent memory read and write
     operations. This option takes effect only when you set the
     `innodb_buffer_pool_size' to a size of 1 gigabyte or more. The
     total size you specify is divided among all the buffer pools. For
     best efficiency, specify a combination of
     `innodb_buffer_pool_instances' and `innodb_buffer_pool_size' so
     that each buffer pool instance is at least 1 gigabyte.

   * `innodb_old_blocks_pct'

     Specifies the approximate percentage of the buffer pool that
     `InnoDB' uses for the old block sublist.  The range of values is 5
     to 95. The default value is 37 (that is, 3/8 of the pool).

   * `innodb_old_blocks_time'

     Specifies how long in milliseconds (ms) a block inserted into the
     old sublist must stay there after its first access before it can
     be moved to the new sublist. The default value is 0: A block
     inserted into the old sublist moves to the new sublist when Innodb
     has evicted 1/4 of the inserted block's pages from the buffer
     pool, no matter how soon after insertion the access occurs. If the
     value is greater than 0, blocks remain in the old sublist until an
     access occurs at least that many ms after the first access. For
     example, a value of 1000 causes blocks to stay in the old sublist
     for 1 second after the first access before they become eligible to
     move to the new sublist.

Setting `innodb_old_blocks_time' greater than 0 prevents one-time table
scans from flooding the new sublist with blocks used only for the scan.
Rows in a block read in for a scan are accessed many times in rapid
succession, but the block is unused after that. If
`innodb_old_blocks_time' is set to a value greater than time to process
the block, the block remains in the `old' sublist and ages to the tail
of the list to be evicted quickly. This way, blocks used only for a
one-time scan do not act to the detriment of heavily used blocks in the
new sublist.

`innodb_old_blocks_time' can be set at runtime, so you can change it
temporarily while performing operations such as table scans and dumps:

     SET GLOBAL innodb_old_blocks_time = 1000;... PERFORM QUERIES THAT SCAN TABLES ...
     SET GLOBAL innodb_old_blocks_time = 0;

This strategy does not apply if your intent is to `warm up' the buffer
pool by filling it with a table's content.  For example, benchmark
tests often perform a table or index scan at server startup, because
that data would normally be in the buffer pool after a period of normal
use. In this case, leave `innodb_old_blocks_time' set to 0, at least
until the warmup phase is complete.

* Monitoring the Buffer Pool *

The output from the InnoDB Standard Monitor contains several fields in
the `BUFFER POOL AND MEMORY' section that pertain to operation of the
buffer pool LRU algorithm:

   * `Old database pages': The number of pages in the old sublist of
     the buffer pool.

   * `Pages made young, not young': The number of old pages that were
     moved to the head of the buffer pool (the new sublist), and the
     number of pages that have remained in the old sublist without
     being made new.

   * `youngs/s non-youngs/s': The number of accesses to old pages that
     have resulted in making them young or not. This metric differs
     from that of the previous item in two ways. First, it relates only
     to old pages.  Second, it is based on number of accesses to pages
     and not the number of pages. (There can be multiple accesses to a
     given page, all of which are counted.)

   * `young-making rate': Hits that cause blocks to move to the head of
     the buffer pool.

   * `not': Hits that do not cause blocks to move to the head of the
     buffer pool (due to the delay not being met).

The `young-making' rate and `not' rate will not normally add up to the
overall buffer pool hit rate. Hits for blocks in the old sublist cause
them to move to the new sublist, but hits to blocks in the new sublist
cause them to move to the head of the list only if they are a certain
distance from the head.

The preceding information from the Monitor can help you make LRU tuning
decisions:

   * If you see very low `youngs/s' values when you do not have large
     scans going on, that indicates that you might need to either
     reduce the delay time, or increase the percentage of the buffer
     pool used for the old sublist.  Increasing the percentage makes
     the old sublist larger, so blocks in that sublist take longer to
     move to the tail and be evicted. This increases the likelihood
     that they will be accessed again and be made young.

   * If you do not see a lot of `non-youngs/s' when you are doing large
     table scans (and lots of `youngs/s'), to tune your delay value to
     be larger.

*Note*:

Per second averages provided in `InnoDB' Monitor output are based on
the elapsed time between the current time and the last time InnoDB
Monitor output was printed.

For more information about InnoDB Monitors, see *Note innodb-monitors::.


File: manual.info,  Node: myisam-key-cache,  Next: query-cache,  Prev: innodb-buffer-pool,  Up: buffering-caching

8.9.2 The `MyISAM' Key Cache
----------------------------

* Menu:

* shared-key-cache::             Shared Key Cache Access
* multiple-key-caches::          Multiple Key Caches
* midpoint-insertion::           Midpoint Insertion Strategy
* index-preloading::             Index Preloading
* key-cache-block-size::         Key Cache Block Size
* key-cache-restructuring::      Restructuring a Key Cache

To minimize disk I/O, the `MyISAM' storage engine exploits a strategy
that is used by many database management systems. It employs a cache
mechanism to keep the most frequently accessed table blocks in memory:

   * For index blocks, a special structure called the _key cache_ (or
     _key buffer_) is maintained. The structure contains a number of
     block buffers where the most-used index blocks are placed.

   * For data blocks, MySQL uses no special cache. Instead it relies on
     the native operating system file system cache.

This section first describes the basic operation of the `MyISAM' key
cache. Then it discusses features that improve key cache performance
and that enable you to better control cache operation:

   * Multiple sessions can access the cache concurrently.

   * You can set up multiple key caches and assign table indexes to
     specific caches.

To control the size of the key cache, use the `key_buffer_size' system
variable. If this variable is set equal to zero, no key cache is used.
The key cache also is not used if the `key_buffer_size' value is too
small to allocate the minimal number of block buffers (8).

When the key cache is not operational, index files are accessed using
only the native file system buffering provided by the operating system.
(In other words, table index blocks are accessed using the same
strategy as that employed for table data blocks.)

An index block is a contiguous unit of access to the `MyISAM' index
files. Usually the size of an index block is equal to the size of nodes
of the index B-tree.  (Indexes are represented on disk using a B-tree
data structure.  Nodes at the bottom of the tree are leaf nodes. Nodes
above the leaf nodes are nonleaf nodes.)

All block buffers in a key cache structure are the same size.  This
size can be equal to, greater than, or less than the size of a table
index block. Usually one these two values is a multiple of the other.

When data from any table index block must be accessed, the server first
checks whether it is available in some block buffer of the key cache.
If it is, the server accesses data in the key cache rather than on
disk. That is, it reads from the cache or writes into it rather than
reading from or writing to disk.  Otherwise, the server chooses a cache
block buffer containing a different table index block (or blocks) and
replaces the data there by a copy of required table index block. As
soon as the new index block is in the cache, the index data can be
accessed.

If it happens that a block selected for replacement has been modified,
the block is considered `dirty.' In this case, prior to being replaced,
its contents are flushed to the table index from which it came.

Usually the server follows an _LRU (Least Recently Used)_ strategy:
When choosing a block for replacement, it selects the least recently
used index block. To make this choice easier, the key cache module
maintains all used blocks in a special list (_LRU chain_) ordered by
time of use. When a block is accessed, it is the most recently used and
is placed at the end of the list. When blocks need to be replaced,
blocks at the beginning of the list are the least recently used and
become the first candidates for eviction.

The `InnoDB' storage engine also uses an LRU algorithm, to manage its
buffer pool. See *Note innodb-buffer-pool::.


File: manual.info,  Node: shared-key-cache,  Next: multiple-key-caches,  Prev: myisam-key-cache,  Up: myisam-key-cache

8.9.2.1 Shared Key Cache Access
...............................

Threads can access key cache buffers simultaneously, subject to the
following conditions:

   * A buffer that is not being updated can be accessed by multiple
     sessions.

   * A buffer that is being updated causes sessions that need to use it
     to wait until the update is complete.

   * Multiple sessions can initiate requests that result in cache block
     replacements, as long as they do not interfere with each other
     (that is, as long as they need different index blocks, and thus
     cause different cache blocks to be replaced).

Shared access to the key cache enables the server to improve throughput
significantly.


File: manual.info,  Node: multiple-key-caches,  Next: midpoint-insertion,  Prev: shared-key-cache,  Up: myisam-key-cache

8.9.2.2 Multiple Key Caches
...........................

Shared access to the key cache improves performance but does not
eliminate contention among sessions entirely. They still compete for
control structures that manage access to the key cache buffers. To
reduce key cache access contention further, MySQL also provides
multiple key caches. This feature enables you to assign different table
indexes to different key caches.

Where there are multiple key caches, the server must know which cache
to use when processing queries for a given `MyISAM' table. By default,
all `MyISAM' table indexes are cached in the default key cache. To
assign table indexes to a specific key cache, use the *Note `CACHE
INDEX': cache-index.  statement (see *Note cache-index::). For example,
the following statement assigns indexes from the tables `t1', `t2', and
`t3' to the key cache named `hot_cache':

     mysql> CACHE INDEX t1, t2, t3 IN hot_cache;
     +---------+--------------------+----------+----------+
     | Table   | Op                 | Msg_type | Msg_text |
     +---------+--------------------+----------+----------+
     | test.t1 | assign_to_keycache | status   | OK       |
     | test.t2 | assign_to_keycache | status   | OK       |
     | test.t3 | assign_to_keycache | status   | OK       |
     +---------+--------------------+----------+----------+

The key cache referred to in a *Note `CACHE INDEX': cache-index.
statement can be created by setting its size with a *Note `SET GLOBAL':
set-statement. parameter setting statement or by using server startup
options. For example:

     mysql> SET GLOBAL keycache1.key_buffer_size=128*1024;

To destroy a key cache, set its size to zero:

     mysql> SET GLOBAL keycache1.key_buffer_size=0;

Note that you cannot destroy the default key cache. Any attempt to do
this will be ignored:

     mysql> SET GLOBAL key_buffer_size = 0;

     mysql> SHOW VARIABLES LIKE 'key_buffer_size';
     +-----------------+---------+
     | Variable_name   | Value   |
     +-----------------+---------+
     | key_buffer_size | 8384512 |
     +-----------------+---------+

Key cache variables are structured system variables that have a name
and components. For `keycache1.key_buffer_size', `keycache1' is the
cache variable name and `key_buffer_size' is the cache component. See
*Note structured-system-variables::, for a description of the syntax
used for referring to structured key cache system variables.

By default, table indexes are assigned to the main (default) key cache
created at the server startup. When a key cache is destroyed, all
indexes assigned to it are reassigned to the default key cache.

For a busy server, you can use a strategy that involves three key
caches:

   * A `hot' key cache that takes up 20% of the space allocated for all
     key caches. Use this for tables that are heavily used for searches
     but that are not updated.

   * A `cold' key cache that takes up 20% of the space allocated for
     all key caches. Use this cache for medium-sized, intensively
     modified tables, such as temporary tables.

   * A `warm' key cache that takes up 60% of the key cache space.
     Employ this as the default key cache, to be used by default for
     all other tables.

One reason the use of three key caches is beneficial is that access to
one key cache structure does not block access to the others. Statements
that access tables assigned to one cache do not compete with statements
that access tables assigned to another cache. Performance gains occur
for other reasons as well:

   * The hot cache is used only for retrieval queries, so its contents
     are never modified. Consequently, whenever an index block needs to
     be pulled in from disk, the contents of the cache block chosen for
     replacement need not be flushed first.

   * For an index assigned to the hot cache, if there are no queries
     requiring an index scan, there is a high probability that the
     index blocks corresponding to nonleaf nodes of the index B-tree
     remain in the cache.

   * An update operation most frequently executed for temporary tables
     is performed much faster when the updated node is in the cache and
     need not be read in from disk first. If the size of the indexes of
     the temporary tables are comparable with the size of cold key
     cache, the probability is very high that the updated node is in the
     cache.

The *Note `CACHE INDEX': cache-index. statement sets up an association
between a table and a key cache, but the association is lost each time
the server restarts. If you want the association to take effect each
time the server starts, one way to accomplish this is to use an option
file: Include variable settings that configure your key caches, and an
`init-file' option that names a file containing *Note `CACHE INDEX':
cache-index.  statements to be executed. For example:

     key_buffer_size = 4G
     hot_cache.key_buffer_size = 2G
     cold_cache.key_buffer_size = 2G
     init_file=/PATH/TO/DATA-DIRECTORY/mysqld_init.sql

The statements in `mysqld_init.sql' are executed each time the server
starts. The file should contain one SQL statement per line. The
following example assigns several tables each to `hot_cache' and
`cold_cache':

     CACHE INDEX db1.t1, db1.t2, db2.t3 IN hot_cache
     CACHE INDEX db1.t4, db2.t5, db2.t6 IN cold_cache


File: manual.info,  Node: midpoint-insertion,  Next: index-preloading,  Prev: multiple-key-caches,  Up: myisam-key-cache

8.9.2.3 Midpoint Insertion Strategy
...................................

By default, the key cache management system uses a simple LRU strategy
for choosing key cache blocks to be evicted, but it also supports a
more sophisticated method called the _midpoint insertion strategy._

When using the midpoint insertion strategy, the LRU chain is divided
into two parts: a hot sublist and a warm sublist. The division point
between two parts is not fixed, but the key cache management system
takes care that the warm part is not `too short,' always containing at
least `key_cache_division_limit' percent of the key cache blocks.
`key_cache_division_limit' is a component of structured key cache
variables, so its value is a parameter that can be set per cache.

When an index block is read from a table into the key cache, it is
placed at the end of the warm sublist. After a certain number of hits
(accesses of the block), it is promoted to the hot sublist. At present,
the number of hits required to promote a block (3) is the same for all
index blocks.

A block promoted into the hot sublist is placed at the end of the list.
The block then circulates within this sublist. If the block stays at
the beginning of the sublist for a long enough time, it is demoted to
the warm sublist. This time is determined by the value of the
`key_cache_age_threshold' component of the key cache.

The threshold value prescribes that, for a key cache containing N
blocks, the block at the beginning of the hot sublist not accessed
within the last `N * key_cache_age_threshold / 100' hits is to be moved
to the beginning of the warm sublist. It then becomes the first
candidate for eviction, because blocks for replacement always are taken
from the beginning of the warm sublist.

The midpoint insertion strategy enables you to keep more-valued blocks
always in the cache. If you prefer to use the plain LRU strategy, leave
the `key_cache_division_limit' value set to its default of 100.

The midpoint insertion strategy helps to improve performance when
execution of a query that requires an index scan effectively pushes out
of the cache all the index blocks corresponding to valuable high-level
B-tree nodes. To avoid this, you must use a midpoint insertion strategy
with the `key_cache_division_limit' set to much less than 100. Then
valuable frequently hit nodes are preserved in the hot sublist during
an index scan operation as well.


File: manual.info,  Node: index-preloading,  Next: key-cache-block-size,  Prev: midpoint-insertion,  Up: myisam-key-cache

8.9.2.4 Index Preloading
........................

If there are enough blocks in a key cache to hold blocks of an entire
index, or at least the blocks corresponding to its nonleaf nodes, it
makes sense to preload the key cache with index blocks before starting
to use it. Preloading enables you to put the table index blocks into a
key cache buffer in the most efficient way: by reading the index blocks
from disk sequentially.

Without preloading, the blocks are still placed into the key cache as
needed by queries. Although the blocks will stay in the cache, because
there are enough buffers for all of them, they are fetched from disk in
random order, and not sequentially.

To preload an index into a cache, use the *Note `LOAD INDEX INTO
CACHE': load-index. statement. For example, the following statement
preloads nodes (index blocks) of indexes of the tables `t1' and `t2':

     mysql> LOAD INDEX INTO CACHE t1, t2 IGNORE LEAVES;
     +---------+--------------+----------+----------+
     | Table   | Op           | Msg_type | Msg_text |
     +---------+--------------+----------+----------+
     | test.t1 | preload_keys | status   | OK       |
     | test.t2 | preload_keys | status   | OK       |
     +---------+--------------+----------+----------+

The `IGNORE LEAVES' modifier causes only blocks for the nonleaf nodes
of the index to be preloaded.  Thus, the statement shown preloads all
index blocks from `t1', but only blocks for the nonleaf nodes from `t2'.

If an index has been assigned to a key cache using a *Note `CACHE
INDEX': cache-index. statement, preloading places index blocks into
that cache. Otherwise, the index is loaded into the default key cache.


File: manual.info,  Node: key-cache-block-size,  Next: key-cache-restructuring,  Prev: index-preloading,  Up: myisam-key-cache

8.9.2.5 Key Cache Block Size
............................

It is possible to specify the size of the block buffers for an
individual key cache using the `key_cache_block_size' variable. This
permits tuning of the performance of I/O operations for index files.

The best performance for I/O operations is achieved when the size of
read buffers is equal to the size of the native operating system I/O
buffers. But setting the size of key nodes equal to the size of the I/O
buffer does not always ensure the best overall performance. When
reading the big leaf nodes, the server pulls in a lot of unnecessary
data, effectively preventing reading other leaf nodes.

To control the size of blocks in the `.MYI' index file of `MyISAM'
tables, use the `--myisam-block-size' option at server startup.


File: manual.info,  Node: key-cache-restructuring,  Prev: key-cache-block-size,  Up: myisam-key-cache

8.9.2.6 Restructuring a Key Cache
.................................

A key cache can be restructured at any time by updating its parameter
values. For example:

     mysql> SET GLOBAL cold_cache.key_buffer_size=4*1024*1024;

If you assign to either the `key_buffer_size' or `key_cache_block_size'
key cache component a value that differs from the component's current
value, the server destroys the cache's old structure and creates a new
one based on the new values. If the cache contains any dirty blocks,
the server saves them to disk before destroying and re-creating the
cache. Restructuring does not occur if you change other key cache
parameters.

When restructuring a key cache, the server first flushes the contents
of any dirty buffers to disk. After that, the cache contents become
unavailable. However, restructuring does not block queries that need to
use indexes assigned to the cache.  Instead, the server directly
accesses the table indexes using native file system caching. File
system caching is not as efficient as using a key cache, so although
queries execute, a slowdown can be anticipated. After the cache has been
restructured, it becomes available again for caching indexes assigned
to it, and the use of file system caching for the indexes ceases.


File: manual.info,  Node: query-cache,  Prev: myisam-key-cache,  Up: buffering-caching

8.9.3 The MySQL Query Cache
---------------------------

* Menu:

* query-cache-operation::        How the Query Cache Operates
* query-cache-in-select::        Query Cache `SELECT' Options
* query-cache-configuration::    Query Cache Configuration
* query-cache-status-and-maintenance::  Query Cache Status and Maintenance

The query cache stores the text of a *Note `SELECT': select. statement
together with the corresponding result that was sent to the client. If
an identical statement is received later, the server retrieves the
results from the query cache rather than parsing and executing the
statement again. The query cache is shared among sessions, so a result
set generated by one client can be sent in response to the same query
issued by another client.

The query cache can be useful in an environment where you have tables
that do not change very often and for which the server receives many
identical queries. This is a typical situation for many Web servers
that generate many dynamic pages based on database content. For
example, when an order form queries a table to display the lists of all
US states or all countries in the world, those values can be retrieved
from the query cache.  Although the values would probably be retrieved
from memory in any case (from the `InnoDB' buffer pool or `MyISAM' key
cache), using the query cache avoids the overhead of processing the
query, deciding whether to use a table scan, and locating the data
block for each row.

The query cache always contains current and reliable data. Any insert,
update, delete, or other modification to a table causes any relevant
entries in the query cache to be flushed.

*Note*:

The query cache does not work in an environment where you have multiple
*Note `mysqld': mysqld. servers updating the same `MyISAM' tables.

The query cache is used for prepared statements under the conditions
described in *Note query-cache-operation::.

*Note*:

As of MySQL 5.5.23, the query cache is not supported for partitioned
tables, and is automatically disabled for queries involving partitioned
tables. The query cache cannot be enabled for such queries. (Bug #53775)

Some performance data for the query cache follows. These results were
generated by running the MySQL benchmark suite on a Linux Alpha
2x500MHz system with 2GB RAM and a 64MB query cache.

   * If all the queries you are performing are simple (such as
     selecting a row from a table with one row), but still differ so
     that the queries cannot be cached, the overhead for having the
     query cache active is 13%. This could be regarded as the worst
     case scenario. In real life, queries tend to be much more
     complicated, so the overhead normally is significantly lower.

   * Searches for a single row in a single-row table are 238% faster
     with the query cache than without it. This can be regarded as
     close to the minimum speedup to be expected for a query that is
     cached.

To disable the query cache at server startup, set the
`query_cache_size' system variable to 0. By disabling the query cache
code, there is no noticeable overhead.

The query cache offers the potential for substantial performance
improvement, but do not assume that it will do so under all
circumstances. With some query cache configurations or server
workloads, you might actually see a performance decrease:

   * Be cautious about sizing the query cache excessively large, which
     increases the overhead required to maintain the cache, possibly
     beyond the benefit of enabling it. Sizes in tens of megabytes are
     usually beneficial. Sizes in the hundreds of megabytes might not
     be.

   * Server workload has a significant effect on query cache
     efficiency. A query mix consisting almost entirely of a fixed set
     of *Note `SELECT': select.  statements is much more likely to
     benefit from enabling the cache than a mix in which frequent *Note
     `INSERT': insert. statements cause continual invalidation of
     results in the cache. In some cases, a workaround is to use the
     `SQL_NO_CACHE' option to prevent results from even entering the
     cache for *Note `SELECT': select. statements that use frequently
     modified tables. (See *Note query-cache-in-select::.)

To verify that enabling the query cache is beneficial, test the
operation of your MySQL server with the cache enabled and disabled.
Then retest periodically because query cache efficiency may change as
server workload changes.


File: manual.info,  Node: query-cache-operation,  Next: query-cache-in-select,  Prev: query-cache,  Up: query-cache

8.9.3.1 How the Query Cache Operates
....................................

This section describes how the query cache works when it is
operational. *Note query-cache-configuration::, describes how to
control whether it is operational.

Incoming queries are compared to those in the query cache before
parsing, so the following two queries are regarded as different by the
query cache:

     SELECT * FROM TBL_NAME
     Select * from TBL_NAME

Queries must be _exactly_ the same (byte for byte) to be seen as
identical. In addition, query strings that are identical may be treated
as different for other reasons. Queries that use different databases,
different protocol versions, or different default character sets are
considered different queries and are cached separately.

The cache is not used for queries of the following types:

   * Queries that are a subquery of an outer query

   * Queries executed within the body of a stored function, trigger, or
     event

Before a query result is fetched from the query cache, MySQL checks
whether the user has *Note `SELECT': select. privilege for all
databases and tables involved. If this is not the case, the cached
result is not used.

If a query result is returned from query cache, the server increments
the `Qcache_hits' status variable, not `Com_select'. See *Note
query-cache-status-and-maintenance::.

If a table changes, all cached queries that use the table become
invalid and are removed from the cache. This includes queries that use
`MERGE' tables that map to the changed table. A table can be changed by
many types of statements, such as *Note `INSERT': insert, *Note
`UPDATE': update, *Note `DELETE': delete, *Note `TRUNCATE TABLE':
truncate-table, *Note `ALTER TABLE': alter-table, *Note `DROP TABLE':
drop-table, or *Note `DROP DATABASE': drop-database.

The query cache also works within transactions when using `InnoDB'
tables.

In MySQL 5.5, the result from a *Note `SELECT': select. query on a view
is cached.

The query cache works for `SELECT SQL_CALC_FOUND_ROWS ...' queries and
stores a value that is returned by a following `SELECT FOUND_ROWS()'
query.  `FOUND_ROWS()' returns the correct value even if the preceding
query was fetched from the cache because the number of found rows is
also stored in the cache. The `SELECT FOUND_ROWS()' query itself cannot
be cached.

Prepared statements that are issued using the binary protocol using
*Note `mysql_stmt_prepare()': mysql-stmt-prepare. and *Note
`mysql_stmt_execute()': mysql-stmt-execute. (see *Note
c-api-prepared-statements::), are subject to limitations on caching.
Comparison with statements in the query cache is based on the text of
the statement after expansion of `?' parameter markers. The statement
is compared only with other cached statements that were executed using
the binary protocol. That is, for query cache purposes, prepared
statements issued using the binary protocol are distinct from prepared
statements issued using the text protocol (see *Note
sql-syntax-prepared-statements::).

A query cannot be cached if it contains any of the functions shown in
the following table.

This table lists functions that if used within a query, do not allow
the query to be cached.

`BENCHMARK()'            `CONNECTION_ID()'        `CONVERT_TZ()'
`CURDATE()'              `CURRENT_DATE()'         `CURRENT_TIME()'
`CURRENT_TIMESTAMP()'    `CURTIME()'              `DATABASE()'
`ENCRYPT()' with one     `FOUND_ROWS()'           `GET_LOCK()'
parameter                                         
`LAST_INSERT_ID()'       `LOAD_FILE()'            `MASTER_POS_WAIT()'
`NOW()'                  `RAND()'                 `RELEASE_LOCK()'
`SLEEP()'                `SYSDATE()'              `UNIX_TIMESTAMP()' with
                                                  no parameters
`USER()'                 `UUID()'                 `UUID_SHORT()'

A query also is not cached under these conditions:

   * It refers to user-defined functions (UDFs) or stored functions.

   * It refers to user variables or local stored program variables.

   * It refers to tables in the `mysql', `INFORMATION_SCHEMA', or
     `performance_schema' database.

   * (_MySQL 5.5.23 and later_:) It refers to any partitioned tables.

   * It is of any of the following forms:

          SELECT ... LOCK IN SHARE MODE
          SELECT ... FOR UPDATE
          SELECT ... INTO OUTFILE ...
          SELECT ... INTO DUMPFILE ...
          SELECT * FROM ... WHERE autoincrement_col IS NULL

     The last form is not cached because it is used as the ODBC
     workaround for obtaining the last insert ID value. See the
     Connector/ODBC section of *Note connectors-apis::.

     Statements within transactions that use `SERIALIZABLE' isolation
     level also cannot be cached because they use `LOCK IN SHARE MODE'
     locking.

   * It uses `TEMPORARY' tables.

   * It does not use any tables.

   * It generates warnings.

   * The user has a column-level privilege for any of the involved
     tables.


File: manual.info,  Node: query-cache-in-select,  Next: query-cache-configuration,  Prev: query-cache-operation,  Up: query-cache

8.9.3.2 Query Cache `SELECT' Options
....................................

Two query cache-related options may be specified in *Note `SELECT':
select. statements:

   * `SQL_CACHE'

     The query result is cached if it is cacheable and the value of the
     `query_cache_type' system variable is `ON' or `DEMAND'.

   * `SQL_NO_CACHE'

     The server does not use the query cache. It neither checks the
     query cache to see whether the result is already cached, nor does
     it cache the query result. (Due to a limitation in the parser, a
     space character must precede and follow the `SQL_NO_CACHE'
     keyword; a nonspace such as a newline causes the server to check
     the query cache to see whether the result is already cached.)

Examples:

     SELECT SQL_CACHE id, name FROM customer;
     SELECT SQL_NO_CACHE id, name FROM customer;


File: manual.info,  Node: query-cache-configuration,  Next: query-cache-status-and-maintenance,  Prev: query-cache-in-select,  Up: query-cache

8.9.3.3 Query Cache Configuration
.................................

The `have_query_cache' server system variable indicates whether the
query cache is available:

     mysql> SHOW VARIABLES LIKE 'have_query_cache';
     +------------------+-------+
     | Variable_name    | Value |
     +------------------+-------+
     | have_query_cache | YES   |
     +------------------+-------+

When using a standard MySQL binary, this value is always `YES', even if
query caching is disabled.

Several other system variables control query cache operation.  These
can be set in an option file or on the command line when starting *Note
`mysqld': mysqld. The query cache system variables all have names that
begin with `query_cache_'. They are described briefly in *Note
server-system-variables::, with additional configuration information
given here.

To set the size of the query cache, set the `query_cache_size' system
variable. Setting it to 0 disables the query cache. The default size is
0, so the query cache is disabled by default.  To reduce overhead
significantly, also start the server with `query_cache_type=0' if you
will not be using the query cache.

*Note*:

When using the Windows Configuration Wizard to install or configure
MySQL, the default value for `query_cache_size' will be configured
automatically for you based on the different configuration types
available. When using the Windows Configuration Wizard, the query cache
may be enabled (that is, set to a nonzero value) due to the selected
configuration. The query cache is also controlled by the setting of the
`query_cache_type' variable.  Check the values of these variables as
set in your `my.ini' file after configuration has taken place.

When you set `query_cache_size' to a nonzero value, keep in mind that
the query cache needs a minimum size of about 40KB to allocate its
structures. (The exact size depends on system architecture.) If you set
the value too small, you'll get a warning, as in this example:

     mysql> SET GLOBAL query_cache_size = 40000;
     Query OK, 0 rows affected, 1 warning (0.00 sec)

     mysql> SHOW WARNINGS\G
     *************************** 1. row ***************************
       Level: Warning
        Code: 1282
     Message: Query cache failed to set size 39936;
              new query cache size is 0

     mysql> SET GLOBAL query_cache_size = 41984;
     Query OK, 0 rows affected (0.00 sec)

     mysql> SHOW VARIABLES LIKE 'query_cache_size';
     +------------------+-------+
     | Variable_name    | Value |
     +------------------+-------+
     | query_cache_size | 41984 |
     +------------------+-------+

For the query cache to actually be able to hold any query results, its
size must be set larger:

     mysql> SET GLOBAL query_cache_size = 1000000;
     Query OK, 0 rows affected (0.04 sec)

     mysql> SHOW VARIABLES LIKE 'query_cache_size';
     +------------------+--------+
     | Variable_name    | Value  |
     +------------------+--------+
     | query_cache_size | 999424 |
     +------------------+--------+
     1 row in set (0.00 sec)

The `query_cache_size' value is aligned to the nearest 1024 byte block.
The value reported may therefore be different from the value that you
assign.

If the query cache size is greater than 0, the `query_cache_type'
variable influences how it works. This variable can be set to the
following values:

   * A value of `0' or `OFF' prevents caching or retrieval of cached
     results.

   * A value of `1' or `ON' enables caching except of those statements
     that begin with `SELECT SQL_NO_CACHE'.

   * A value of `2' or `DEMAND' causes caching of only those statements
     that begin with `SELECT SQL_CACHE'.

If `query_cache_size' is 0, you should also set `query_cache_type'
variable to 0. In this case, the server does not acquire the query cache
mutex at all, which means that the query cache cannot be enabled at
runtime and there is reduced overhead in query execution.

Setting the `GLOBAL' `query_cache_type' value determines query cache
behavior for all clients that connect after the change is made.
Individual clients can control cache behavior for their own connection
by setting the `SESSION' `query_cache_type' value. For example, a
client can disable use of the query cache for its own queries like this:

     mysql> SET SESSION query_cache_type = OFF;

If you set `query_cache_type' at server startup (rather than at runtime
with a *Note `SET': set-statement.  statement), only the numeric values
are permitted.

To control the maximum size of individual query results that can be
cached, set the `query_cache_limit' system variable. The default value
is 1MB.

Be careful not to set the size of the cache too large. Due to the need
for threads to lock the cache during updates, you may see lock
contention issues with a very large cache.

*Note*:

You can set the maximum size that can be specified for the query cache
at runtime with the *Note `SET': set-statement.  statement by using the
`--maximum-query_cache_size=32M' option on the command line or in the
configuration file.

When a query is to be cached, its result (the data sent to the client)
is stored in the query cache during result retrieval.  Therefore the
data usually is not handled in one big chunk.  The query cache
allocates blocks for storing this data on demand, so when one block is
filled, a new block is allocated.  Because memory allocation operation
is costly (timewise), the query cache allocates blocks with a minimum
size given by the `query_cache_min_res_unit' system variable. When a
query is executed, the last result block is trimmed to the actual data
size so that unused memory is freed. Depending on the types of queries
your server executes, you might find it helpful to tune the value of
`query_cache_min_res_unit':

   * The default value of `query_cache_min_res_unit' is 4KB. This
     should be adequate for most cases.

   * If you have a lot of queries with small results, the default block
     size may lead to memory fragmentation, as indicated by a large
     number of free blocks. Fragmentation can force the query cache to
     prune (delete) queries from the cache due to lack of memory. In
     this case, decrease the value of `query_cache_min_res_unit'.  The
     number of free blocks and queries removed due to pruning are given
     by the values of the `Qcache_free_blocks' and
     `Qcache_lowmem_prunes' status variables.

   * If most of your queries have large results (check the
     `Qcache_total_blocks' and `Qcache_queries_in_cache' status
     variables), you can increase performance by increasing
     `query_cache_min_res_unit'.  However, be careful to not make it
     too large (see the previous item).


File: manual.info,  Node: query-cache-status-and-maintenance,  Prev: query-cache-configuration,  Up: query-cache

8.9.3.4 Query Cache Status and Maintenance
..........................................

To check whether the query cache is present in your MySQL server, use
the following statement:

     mysql> SHOW VARIABLES LIKE 'have_query_cache';
     +------------------+-------+
     | Variable_name    | Value |
     +------------------+-------+
     | have_query_cache | YES   |
     +------------------+-------+

You can defragment the query cache to better utilize its memory with
the *Note `FLUSH QUERY CACHE': flush. statement. The statement does not
remove any queries from the cache.

The `RESET QUERY CACHE' statement removes all query results from the
query cache. The *Note `FLUSH TABLES': flush.  statement also does this.

To monitor query cache performance, use *Note `SHOW STATUS':
show-status. to view the cache status variables:

     mysql> SHOW STATUS LIKE 'Qcache%';
     +-------------------------+--------+
     | Variable_name           | Value  |
     +-------------------------+--------+
     | Qcache_free_blocks      | 36     |
     | Qcache_free_memory      | 138488 |
     | Qcache_hits             | 79570  |
     | Qcache_inserts          | 27087  |
     | Qcache_lowmem_prunes    | 3114   |
     | Qcache_not_cached       | 22989  |
     | Qcache_queries_in_cache | 415    |
     | Qcache_total_blocks     | 912    |
     +-------------------------+--------+

Descriptions of each of these variables are given in *Note
server-status-variables::. Some uses for them are described here.

The total number of *Note `SELECT': select.  queries is given by this
formula:

       Com_select
     + Qcache_hits
     + queries with errors found by parser

The `Com_select' value is given by this formula:

       Qcache_inserts
     + Qcache_not_cached
     + queries with errors found during the column-privileges check

The query cache uses variable-length blocks, so `Qcache_total_blocks'
and `Qcache_free_blocks' may indicate query cache memory fragmentation.
After *Note `FLUSH QUERY CACHE': flush, only a single free block
remains.

Every cached query requires a minimum of two blocks (one for the query
text and one or more for the query results). Also, every table that is
used by a query requires one block.  However, if two or more queries
use the same table, only one table block needs to be allocated.

The information provided by the `Qcache_lowmem_prunes' status variable
can help you tune the query cache size. It counts the number of queries
that have been removed from the cache to free up memory for caching new
queries. The query cache uses a least recently used (LRU) strategy to
decide which queries to remove from the cache. Tuning information is
given in *Note query-cache-configuration::.


File: manual.info,  Node: locking-issues,  Next: optimizing-the-server,  Prev: buffering-caching,  Up: optimization

8.10 Optimizing Locking Operations
==================================

* Menu:

* internal-locking::             Internal Locking Methods
* table-locking::                Table Locking Issues
* concurrent-inserts::           Concurrent Inserts
* metadata-locking::             Metadata Locking
* external-locking::             External Locking

When your database is busy with multiple sessions reading and writing
data, the mechanism that controls access to data files and memory areas
can become a consideration for performance tuning.  Otherwise, sessions
can spend time waiting for access to resources when they could be
running concurrently.

MySQL manages contention for table contents using locking:

   * Internal locking is performed within the MySQL server itself to
     manage contention for table contents by multiple threads.  This
     type of locking is internal because it is performed entirely by
     the server and involves no other programs. See *Note
     internal-locking::.

   * External locking occurs when the server and other programs lock
     *Note `MyISAM': myisam-storage-engine. table files to coordinate
     among themselves which program can access the tables at which
     time. See *Note external-locking::.


File: manual.info,  Node: internal-locking,  Next: table-locking,  Prev: locking-issues,  Up: locking-issues

8.10.1 Internal Locking Methods
-------------------------------

This section discusses internal locking; that is, locking performed
within the MySQL server to manage contention for table contents by
multiple sessions.

MySQL uses row-level locking for `InnoDB' tables to support
simultaneous write access by multiple sessions, making them suitable
for multi-user, highly concurrent, and OLTP applications. MySQL uses
table-level locking for `MyISAM', `MEMORY', and `MERGE' tables,
allowing only one session to update those tables at a time, making them
more suitable for read-only, read-mostly, or single-user applications.

* Considerations for Row Locking *

Advantages of row-level locking:

   * Fewer lock conflicts when different sessions access different rows.

   * Fewer changes for rollbacks.

   * Possible to lock a single row for a long time.

Disadvantages of row-level locking:

   * Requires more memory than table-level locks.

   * Slower than table-level locks when used on a large part of the
     table because you must acquire many more locks.

   * Slower than other locks if you often do `GROUP BY' operations on a
     large part of the data or if you must scan the entire table
     frequently.

* Considerations for Table Locking *

Table locking in MySQL is deadlock-free for storage engines that use
table-level locking. Deadlock avoidance is managed by always requesting
all needed locks at once at the beginning of a query and always locking
the tables in the same order.

MySQL grants table write locks as follows:

  1. If there are no locks on the table, put a write lock on it.

  2. Otherwise, put the lock request in the write lock queue.

MySQL grants table read locks as follows:

  1. If there are no write locks on the table, put a read lock on it.

  2. Otherwise, put the lock request in the read lock queue.

Table updates are given higher priority than table retrievals.
Therefore, when a lock is released, the lock is made available to the
requests in the write lock queue and then to the requests in the read
lock queue. This ensures that updates to a table are not `starved' even
if there is heavy *Note `SELECT': select. activity for the table.
However, if you have many updates for a table, *Note `SELECT': select.
statements wait until there are no more updates.

For information on altering the priority of reads and writes, see *Note
table-locking::.

You can analyze the table lock contention on your system by checking the
`Table_locks_immediate' and `Table_locks_waited' status variables,
which indicate the number of times that requests for table locks could
be granted immediately and the number that had to wait, respectively:

     mysql> SHOW STATUS LIKE 'Table%';
     +-----------------------+---------+
     | Variable_name         | Value   |
     +-----------------------+---------+
     | Table_locks_immediate | 1151552 |
     | Table_locks_waited    | 15324   |
     +-----------------------+---------+

The `MyISAM' storage engine supports concurrent inserts to reduce
contention between readers and writers for a given table: If a `MyISAM'
table has no free blocks in the middle of the data file, rows are
always inserted at the end of the data file. In this case, you can
freely mix concurrent *Note `INSERT': insert. and *Note `SELECT':
select. statements for a `MyISAM' table without locks. That is, you can
insert rows into a `MyISAM' table at the same time other clients are
reading from it. Holes can result from rows having been deleted from or
updated in the middle of the table. If there are holes, concurrent
inserts are disabled but are enabled again automatically when all holes
have been filled with new data.. This behavior is altered by the
`concurrent_insert' system variable. See *Note concurrent-inserts::.

If you acquire a table lock explicitly with *Note `LOCK TABLES':
lock-tables, you can request a `READ LOCAL' lock rather than a `READ'
lock to enable other sessions to perform concurrent inserts while you
have the table locked.

To perform many *Note `INSERT': insert. and *Note `SELECT': select.
operations on a table `real_table' when concurrent inserts are not
possible, you can insert rows into a temporary table `temp_table' and
update the real table with the rows from the temporary table
periodically. This can be done with the following code:

     mysql> LOCK TABLES real_table WRITE, temp_table WRITE;
     mysql> INSERT INTO real_table SELECT * FROM temp_table;
     mysql> DELETE FROM temp_table;
     mysql> UNLOCK TABLES;

`InnoDB' uses row locks. Deadlocks are possible for `InnoDB' because it
automatically acquires locks during the processing of SQL statements,
not at the start of the transaction.

* Choosing the Type of Locking *

Generally, table locks are superior to row-level locks in the following
cases:

   * Most statements for the table are reads.

   * Statements for the table are a mix of reads and writes, where
     writes are updates or deletes for a single row that can be fetched
     with one key read:

          UPDATE TBL_NAME SET COLUMN=VALUE WHERE UNIQUE_KEY_COL=KEY_VALUE;
          DELETE FROM TBL_NAME WHERE UNIQUE_KEY_COL=KEY_VALUE;

   * *Note `SELECT': select. combined with concurrent *Note `INSERT':
     insert. statements, and very few *Note `UPDATE': update. or *Note
     `DELETE': delete. statements.

   * Many scans or `GROUP BY' operations on the entire table without
     any writers.

With higher-level locks, you can more easily tune applications by
supporting locks of different types, because the lock overhead is less
than for row-level locks.

Options other than row-level locking:

   * Versioning (such as that used in MySQL for concurrent inserts)
     where it is possible to have one writer at the same time as many
     readers. This means that the database or table supports different
     views for the data depending on when access begins. Other common
     terms for this are `time travel,' `copy on write,' or `copy on
     demand.'

   * Copy on demand is in many cases superior to row-level locking.
     However, in the worst case, it can use much more memory than using
     normal locks.

   * Instead of using row-level locks, you can employ application-level
     locks, such as those provided by `GET_LOCK()' and `RELEASE_LOCK()'
     in MySQL.  These are advisory locks, so they work only with
     applications that cooperate with each other. See *Note
     miscellaneous-functions::.


File: manual.info,  Node: table-locking,  Next: concurrent-inserts,  Prev: internal-locking,  Up: locking-issues

8.10.2 Table Locking Issues
---------------------------

`InnoDB' tables use row-level locking so that multiple sessions and
applications can read from and write to the same table simultaneously,
without making each other wait or producing inconsistent results. For
this storage engine, avoid using the *Note `LOCK TABLES': lock-tables.
statement, because it does not offer any extra protection, but instead
reduces concurrency. The automatic row-level locking makes these tables
suitable for your busiest databases with your most important data,
while also simplifying application logic since you do not need to lock
and unlock tables. Consequently, the `InnoDB' storage engine is the
default in MySQL 5.5 and higher.

MySQL uses table locking (instead of page, row, or column locking) for
all storage engines except `InnoDB' and *Note `NDBCLUSTER':
mysql-cluster. The locking operations themselves do not have much
overhead. But because only one session can write to a table at any one
time, for best performance with these other storage engines, use them
primarily for tables that are queried often and rarely inserted into or
updated.

* Performance Considerations Favoring `InnoDB' *

When choosing whether to create a table using `InnoDB' or a different
storage engine, keep in mind the following disadvantages of table
locking:

   * Table locking enables many sessions to read from a table at the
     same time, but if a session wants to write to a table, it must
     first get exclusive access, meaning it might have to wait for
     other sessions to finish with the table first.  During the update,
     all other sessions that want to access this particular table must
     wait until the update is done.

   * Table locking causes problems when a session is waiting because
     the disk is full and free space needs to become available before
     the session can proceed. In this case, all sessions that want to
     access the problem table are also put in a waiting state until
     more disk space is made available.

   * A *Note `SELECT': select. statement that takes a long time to run
     prevents other sessions from updating the table in the meantime,
     making the other sessions appear slow or unresponsive. While a
     session is waiting to get exclusive access to the table for
     updates, other sessions that issue *Note `SELECT': select.
     statements will queue up behind it, reducing concurrency even for
     read-only sessions.

* Workarounds for Locking Performance Issues *

The following items describe some ways to avoid or reduce contention
caused by table locking:

   * Consider switching the table to the `InnoDB' storage engine,
     either using `CREATE TABLE ... ENGINE=INNODB' during setup, or
     using `ALTER TABLE ...  ENGINE=INNODB' for an existing table. See
     *Note innodb-storage-engine:: for more details about this storage
     engine.

   * Optimize *Note `SELECT': select. statements to run faster so that
     they lock tables for a shorter time. You might have to create some
     summary tables to do this.

   * Start *Note `mysqld': mysqld. with `--low-priority-updates'. For
     storage engines that use only table-level locking (such as
     `MyISAM', `MEMORY', and `MERGE'), this gives all statements that
     update (modify) a table lower priority than *Note `SELECT':
     select. statements. In this case, the second *Note `SELECT':
     select.  statement in the preceding scenario would execute before
     the *Note `UPDATE': update. statement, and would not wait for the
     first *Note `SELECT': select.  to finish.

   * To specify that all updates issued in a specific connection should
     be done with low priority, set the `low_priority_updates' server
     system variable equal to 1.

   * To give a specific *Note `INSERT': insert, *Note `UPDATE': update,
     or *Note `DELETE': delete. statement lower priority, use the
     `LOW_PRIORITY' attribute.

   * To give a specific *Note `SELECT': select.  statement higher
     priority, use the `HIGH_PRIORITY' attribute. See *Note select::.

   * Start *Note `mysqld': mysqld. with a low value for the
     `max_write_lock_count' system variable to force MySQL to
     temporarily elevate the priority of all *Note `SELECT': select.
     statements that are waiting for a table after a specific number of
     inserts to the table occur. This permits `READ' locks after a
     certain number of `WRITE' locks.

   * If you have problems with *Note `INSERT': insert. combined with
     *Note `SELECT': select, consider switching to `MyISAM' tables,
     which support concurrent *Note `SELECT': select. and *Note
     `INSERT': insert. statements. (See *Note concurrent-inserts::.)

   * If you mix inserts and deletes on the same table, *Note `INSERT
     DELAYED': insert-delayed. may be of great help. See *Note
     insert-delayed::.

   * If you have problems with mixed *Note `SELECT': select. and *Note
     `DELETE': delete. statements, the `LIMIT' option to *Note
     `DELETE': delete. may help. See *Note delete::.

   * Using `SQL_BUFFER_RESULT' with *Note `SELECT': select. statements
     can help to make the duration of table locks shorter. See *Note
     select::.

   * Splitting table contents into separate tables may help, by
     allowing queries to run against columns in one table, while
     updates are confined to columns in a different table.

   * You could change the locking code in `mysys/thr_lock.c' to use a
     single queue.  In this case, write locks and read locks would have
     the same priority, which might help some applications.


File: manual.info,  Node: concurrent-inserts,  Next: metadata-locking,  Prev: table-locking,  Up: locking-issues

8.10.3 Concurrent Inserts
-------------------------

The `MyISAM' storage engine supports concurrent inserts to reduce
contention between readers and writers for a given table: If a `MyISAM'
table has no holes in the data file (deleted rows in the middle), an
*Note `INSERT': insert. statement can be executed to add rows to the
end of the table at the same time that *Note `SELECT': select.
statements are reading rows from the table. If there are multiple *Note
`INSERT': insert. statements, they are queued and performed in
sequence, concurrently with the *Note `SELECT': select. statements. The
results of a concurrent *Note `INSERT': insert. may not be visible
immediately.

The `concurrent_insert' system variable can be set to modify the
concurrent-insert processing.  By default, the variable is set to
`AUTO' (or 1) and concurrent inserts are handled as just described. If
`concurrent_insert' is set to `NEVER' (or 0), concurrent inserts are
disabled. If the variable is set to `ALWAYS' (or 2), concurrent inserts
at the end of the table are permitted even for tables that have deleted
rows. See also the description of the `concurrent_insert' system
variable.

Under circumstances where concurrent inserts can be used, there is
seldom any need to use the `DELAYED' modifier for *Note `INSERT':
insert. statements.  See *Note insert-delayed::.

If you are using the binary log, concurrent inserts are converted to
normal inserts for `CREATE ...  SELECT' or *Note `INSERT ... SELECT':
insert-select. statements. This is done to ensure that you can
re-create an exact copy of your tables by applying the log during a
backup operation. See *Note binary-log::. In addition, for those
statements a read lock is placed on the selected-from table such that
inserts into that table are blocked. The effect is that concurrent
inserts for that table must wait as well.

With *Note `LOAD DATA INFILE': load-data, if you specify `CONCURRENT'
with a `MyISAM' table that satisfies the condition for concurrent
inserts (that is, it contains no free blocks in the middle), other
sessions can retrieve data from the table while *Note `LOAD DATA':
load-data. is executing. Use of the `CONCURRENT' option affects the
performance of *Note `LOAD DATA': load-data. a bit, even if no other
session is using the table at the same time.

If you specify `HIGH_PRIORITY', it overrides the effect of the
`--low-priority-updates' option if the server was started with that
option. It also causes concurrent inserts not to be used.

For *Note `LOCK TABLE': lock-tables, the difference between `READ
LOCAL' and `READ' is that `READ LOCAL' permits nonconflicting *Note
`INSERT': insert. statements (concurrent inserts) to execute while the
lock is held. However, this cannot be used if you are going to
manipulate the database using processes external to the server while
you hold the lock.


File: manual.info,  Node: metadata-locking,  Next: external-locking,  Prev: concurrent-inserts,  Up: locking-issues

8.10.4 Metadata Locking
-----------------------

MySQL 5.5.3 and up uses metadata locking to manage access to objects
(tables, triggers, and so forth). Metadata locking is used to ensure
data consistency but does involve some overhead, which increases as
query volume increases. Metadata contention increases the more that
multiple queries attempt to access the same objects.

Metadata locking is not a replacement for the table definition case,
and its mutxes and locks differ from the `LOCK_open' mutex. The
following discussion provides some information about how metadata
locking works.

To ensure transaction serializability, the server must not permit one
session to perform a data definition language (DDL) statement on a
table that is used in an uncompleted transaction in another session.
The server achieves this by acquiring metadata locks on tables used
within a transaction and deferring release of those locks until the
transaction ends. A metadata lock on a table prevents changes to the
table's structure. This locking approach has the implication that a
table that is being used by a transaction within one session cannot be
used in DDL statements by other sessions until the transaction ends.

This principle applies not only to transactional tables, but also to
nontransactional tables. Suppose that a session begins a transaction
that uses transactional table `t' and nontransactional table `nt' as
follows:

     START TRANSACTION;
     SELECT * FROM t;
     SELECT * FROM nt;

Metadata locks are held on both `t' and `nt' until the transaction
ends. If another session attempts a DDL operation on either table, it
blocks until metadata lock release at transaction end. For example, a
second session blocks if it attempts any of these operations:

     DROP TABLE t;
     ALTER TABLE t ...;
     DROP TABLE nt;
     ALTER TABLE nt ...;

If the server acquires metadata locks for a statement that is
syntactically valid but fails during execution, it does not release the
locks early. Lock release is still deferred to the end of the
transaction because the failed statement is written to the binary log
and the locks protect log consistency.

In autocommit mode, each statement is in effect a complete transaction,
so metadata locks acquired for the statement are held only to the end
of the statement.

Metadata locks acquired during a *Note `PREPARE': prepare. statement
are released once the statement has been prepared, even if preparation
occurs within a multiple-statement transaction.

Before MySQL 5.5.3, when a transaction acquired the equivalent of a
metadata lock for a table used within a statement, it released the lock
at the end of the statement. This approach had the disadvantage that if
a DDL statement occurred for a table that was being used by another
session in an active transaction, statements could be written to the
binary log in the wrong order.


File: manual.info,  Node: external-locking,  Prev: metadata-locking,  Up: locking-issues

8.10.5 External Locking
-----------------------

External locking is the use of file system locking to manage contention
for *Note `MyISAM': myisam-storage-engine. database tables by multiple
processes. External locking is used in situations where a single
process such as the MySQL server cannot be assumed to be the only
process that requires access to tables. Here are some examples:

   * If you run multiple servers that use the same database directory
     (not recommended), each server must have external locking enabled.

   * If you use *Note `myisamchk': myisamchk. to perform table
     maintenance operations on *Note `MyISAM': myisam-storage-engine.
     tables, you must either ensure that the server is not running, or
     that the server has external locking enabled so that it locks
     table files as necessary to coordinate with *Note `myisamchk':
     myisamchk.  for access to the tables. The same is true for use of
     *Note `myisampack': myisampack. to pack *Note `MyISAM':
     myisam-storage-engine. tables.

     If the server is run with external locking enabled, you can use
     *Note `myisamchk': myisamchk. at any time for read operations such
     a checking tables. In this case, if the server tries to update a
     table that *Note `myisamchk': myisamchk. is using, the server will
     wait for *Note `myisamchk': myisamchk. to finish before it
     continues.

     If you use *Note `myisamchk': myisamchk. for write operations such
     as repairing or optimizing tables, or if you use *Note
     `myisampack': myisampack. to pack tables, you _must_ always ensure
     that the *Note `mysqld': mysqld. server is not using the table. If
     you don't stop *Note `mysqld': mysqld, at least do a *Note
     `mysqladmin flush-tables': mysqladmin. before you run *Note
     `myisamchk': myisamchk. Your tables _may become corrupted_ if the
     server and *Note `myisamchk': myisamchk. access the tables
     simultaneously.

With external locking in effect, each process that requires access to a
table acquires a file system lock for the table files before proceeding
to access the table. If all necessary locks cannot be acquired, the
process is blocked from accessing the table until the locks can be
obtained (after the process that currently holds the locks releases
them).

External locking affects server performance because the server must
sometimes wait for other processes before it can access tables.

External locking is unnecessary if you run a single server to access a
given data directory (which is the usual case) and if no other programs
such as *Note `myisamchk': myisamchk. need to modify tables while the
server is running. If you only _read_ tables with other programs,
external locking is not required, although *Note `myisamchk': myisamchk.
might report warnings if the server changes tables while *Note
`myisamchk': myisamchk. is reading them.

With external locking disabled, to use *Note `myisamchk': myisamchk,
you must either stop the server while *Note `myisamchk': myisamchk.
executes or else lock and flush the tables before running *Note
`myisamchk': myisamchk.  (See *Note system-optimization::.) To avoid
this requirement, use the *Note `CHECK TABLE': check-table.  and *Note
`REPAIR TABLE': repair-table. statements to check and repair *Note
`MyISAM': myisam-storage-engine. tables.

For *Note `mysqld': mysqld, external locking is controlled by the value
of the `skip_external_locking' system variable. When this variable is
enabled, external locking is disabled, and vice versa. From MySQL 4.0
on, external locking is disabled by default.

Use of external locking can be controlled at server startup by using
the `--external-locking' or `--skip-external-locking' option.

If you do use external locking option to enable updates to *Note
`MyISAM': myisam-storage-engine. tables from many MySQL processes, you
must ensure that the following conditions are satisfied:

   * Do not use the query cache for queries that use tables that are
     updated by another process.

   * Do not start the server with the `--delay-key-write=ALL' option or
     use the `DELAY_KEY_WRITE=1' table option for any shared tables.
     Otherwise, index corruption can occur.

The easiest way to satisfy these conditions is to always use
`--external-locking' together with `--delay-key-write=OFF' and
`--query-cache-size=0'. (This is not done by default because in many
setups it is useful to have a mixture of the preceding options.)


File: manual.info,  Node: optimizing-the-server,  Next: optimize-benchmarking,  Prev: locking-issues,  Up: optimization

8.11 Optimizing the MySQL Server
================================

* Menu:

* system-optimization::          System Factors and Startup Parameter Tuning
* server-parameters::            Tuning Server Parameters
* disk-issues::                  Optimizing Disk I/O
* optimizing-memory::            Optimizing Memory Use
* optimizing-network::           Optimizing Network Use
* thread-pool-plugin::           The Thread Pool Plugin

This section discusses optimization techniques for the database server,
primarily dealing with system configuration rather than tuning SQL
statements. The information in this section is appropriate for DBAs who
want to ensure performance and scalability across the servers they
manage; for developers constructing installation scripts that include
setting up the database; and people running MySQL themselves for
development, testing, and so on who want to maximize their own
productivity.


File: manual.info,  Node: system-optimization,  Next: server-parameters,  Prev: optimizing-the-server,  Up: optimizing-the-server

8.11.1 System Factors and Startup Parameter Tuning
--------------------------------------------------

We start with system-level factors, because some of these decisions
must be made very early to achieve large performance gains. In other
cases, a quick look at this section may suffice.  However, it is always
nice to have a sense of how much can be gained by changing factors that
apply at this level.

The operating system to use is very important. To get the best use of
multiple-CPU machines, you should use Solaris (because its threads
implementation works well) or Linux (because the 2.4 and later kernels
have good SMP support). Note that older Linux kernels have a 2GB
filesize limit by default. If you have such a kernel and a need for
files larger than 2GB, get the Large File Support (LFS) patch for the
ext2 file system. Other file systems such as ReiserFS and XFS do not
have this 2GB limitation.

Before using MySQL in production, test it on your intended platform.

Other tips:

   * If you have enough RAM, you could remove all swap devices.  Some
     operating systems use a swap device in some contexts even if you
     have free memory.

   * Avoid external locking for *Note `MyISAM': myisam-storage-engine.
     tables. Since MySQL 4.0, the default has been for external locking
     to be disabled on all systems. The `--external-locking' and
     `--skip-external-locking' options explicitly enable and disable
     external locking.

     Note that disabling external locking does not affect MySQL's
     functionality as long as you run only one server. Just remember to
     take down the server (or lock and flush the relevant tables)
     before you run *Note `myisamchk': myisamchk. On some systems it is
     mandatory to disable external locking because it does not work,
     anyway.

     The only case in which you cannot disable external locking is when
     you run multiple MySQL _servers_ (not clients) on the same data,
     or if you run *Note `myisamchk': myisamchk. to check (not repair)
     a table without telling the server to flush and lock the tables
     first. Note that using multiple MySQL servers to access the same
     data concurrently is generally _not_ recommended, except when
     using MySQL Cluster.

     The *Note `LOCK TABLES': lock-tables. and *Note `UNLOCK TABLES':
     lock-tables. statements use internal locking, so you can use them
     even if external locking is disabled.


File: manual.info,  Node: server-parameters,  Next: disk-issues,  Prev: system-optimization,  Up: optimizing-the-server

8.11.2 Tuning Server Parameters
-------------------------------

You can determine the default buffer sizes used by the *Note `mysqld':
mysqld. server using this command:

     shell> mysqld --verbose --help

This command produces a list of all *Note `mysqld': mysqld.  options
and configurable system variables. The output includes the default
variable values and looks something like this:

     abort-slave-event-count                           0
     allow-suspicious-udfs                             FALSE
     archive                                           ON
     auto-increment-increment                          1
     auto-increment-offset                             1
     autocommit                                        TRUE
     automatic-sp-privileges                           TRUE
     back-log                                          50
     basedir                                           /home/jon/bin/mysql-5.5-cluster/
     big-tables                                        FALSE
     bind-address                                      (No default value)
     binlog-cache-size                                 32768
     binlog-direct-non-transactional-updates           FALSE
     binlog-format                                     STATEMENT
     binlog-row-event-max-size                         1024
     binlog-stmt-cache-size                            32768
     blackhole                                         ON
     bulk-insert-buffer-size                           8388608
     character-set-client-handshake                    TRUE
     character-set-filesystem                          binary
     character-set-server                              latin1
     character-sets-dir                                /home/jon/bin/mysql-5.5-cluster/share/charsets/
     chroot                                            (No default value)
     collation-server                                  latin1_swedish_ci
     completion-type                                   NO_CHAIN
     concurrent-insert                                 AUTO
     connect-timeout                                   10
     console                                           FALSE
     datadir                                           (No default value)
     date-format                                       %Y-%m-%d
     datetime-format                                   %Y-%m-%d %H:%i:%s
     default-storage-engine                            InnoDB
     default-time-zone                                 (No default value)
     default-week-format                               0
     delay-key-write                                   ON
     delayed-insert-limit                              100
     delayed-insert-timeout                            300
     delayed-queue-size                                1000
     des-key-file                                      (No default value)
     disconnect-slave-event-count                      0
     div-precision-increment                           4
     engine-condition-pushdown                         TRUE
     event-scheduler                                   OFF
     expire-logs-days                                  0
     external-locking                                  FALSE
     flush                                             FALSE
     flush-time                                        0
     ft-boolean-syntax                                 + -><()~*:""&|
     ft-max-word-len                                   84
     ft-min-word-len                                   4
     ft-query-expansion-limit                          20
     ft-stopword-file                                  (No default value)
     gdb                                               FALSE
     general-log                                       FALSE
     general-log-file                                  /home/jon/bin/mysql-5.5-cluster/data/torsk.log
     group-concat-max-len                              1024
     help                                              TRUE
     ignore-builtin-innodb                             FALSE
     init-connect
     init-file                                         (No default value)
     init-rpl-role                                     MASTER
     init-slave
     innodb                                            ON
     innodb-adaptive-flushing                          TRUE
     innodb-adaptive-hash-index                        TRUE
     innodb-additional-mem-pool-size                   8388608
     innodb-autoextend-increment                       8
     innodb-autoinc-lock-mode                          1
     innodb-buffer-pool-instances                      1
     innodb-buffer-pool-size                           134217728
     innodb-change-buffering                           all
     innodb-checksums                                  TRUE
     innodb-cmp                                        ON
     innodb-cmp-reset                                  ON
     innodb-cmpmem                                     ON
     innodb-cmpmem-reset                               ON
     innodb-commit-concurrency                         0
     innodb-concurrency-tickets                        500
     innodb-data-file-path                             (No default value)
     innodb-data-home-dir                              (No default value)
     innodb-doublewrite                                TRUE
     innodb-fast-shutdown                              1
     innodb-file-format                                Antelope
     innodb-file-format-check                          TRUE
     innodb-file-format-max                            Antelope
     innodb-file-io-threads                            4
     innodb-file-per-table                             FALSE
     innodb-flush-log-at-trx-commit                    1
     innodb-flush-method                               (No default value)
     innodb-force-recovery                             0
     innodb-io-capacity                                200
     innodb-large-prefix                               FALSE
     innodb-lock-wait-timeout                          50
     innodb-lock-waits                                 ON
     innodb-locks                                      ON
     innodb-locks-unsafe-for-binlog                    FALSE
     innodb-log-buffer-size                            8388608
     innodb-log-file-size                              5242880
     innodb-log-files-in-group                         2
     innodb-log-group-home-dir                         (No default value)
     innodb-max-dirty-pages-pct                        75
     innodb-max-purge-lag                              0
     innodb-mirrored-log-groups                        1
     innodb-old-blocks-pct                             37
     innodb-old-blocks-time                            0
     innodb-open-files                                 300
     innodb-purge-batch-size                           20
     innodb-purge-threads                              0
     innodb-read-ahead-threshold                       56
     innodb-read-io-threads                            4
     innodb-replication-delay                          0
     innodb-rollback-on-timeout                        FALSE
     innodb-rollback-segments                          128
     innodb-spin-wait-delay                            6
     innodb-stats-method                               nulls_equal
     innodb-stats-on-metadata                          TRUE
     innodb-stats-sample-pages                         8
     innodb-status-file                                FALSE
     innodb-strict-mode                                FALSE
     innodb-support-xa                                 TRUE
     innodb-sync-spin-loops                            30
     innodb-table-locks                                TRUE
     innodb-thread-concurrency                         0
     innodb-thread-sleep-delay                         10000
     innodb-trx                                        ON
     innodb-use-native-aio                             TRUE
     innodb-use-sys-malloc                             TRUE
     innodb-write-io-threads                           4
     interactive-timeout                               28800
     join-buffer-size                                  131072
     keep-files-on-create                              FALSE
     key-buffer-size                                   8388608
     key-cache-age-threshold                           300
     key-cache-block-size                              1024
     key-cache-division-limit                          100
     language                                          /home/jon/bin/mysql-5.5-cluster/share/
     large-pages                                       FALSE
     lc-messages                                       en_US
     lc-messages-dir                                   /home/jon/bin/mysql-5.5-cluster/share/
     lc-time-names                                     en_US
     local-infile                                      TRUE
     lock-wait-timeout                                 31536000
     log                                               /home/jon/bin/mysql-5.5-cluster/data/torsk.log
     log-bin                                           mister-pibb
     log-bin-index                                     (No default value)
     log-bin-trust-function-creators                   FALSE
     log-error
     log-isam                                          myisam.log
     log-output                                        FILE
     log-queries-not-using-indexes                     FALSE
     log-short-format                                  FALSE
     log-slave-updates                                 FALSE
     log-slow-admin-statements                         FALSE
     log-slow-queries                                  /home/jon/bin/mysql-5.5-cluster/data/torsk-slow.log
     log-slow-slave-statements                         FALSE
     log-tc                                            tc.log
     log-tc-size                                       24576
     log-warnings                                      1
     long-query-time                                   10
     low-priority-updates                              FALSE
     lower-case-table-names                            0
     master-info-file                                  master.info
     master-retry-count                                86400
     max-allowed-packet                                1048576
     max-binlog-cache-size                             18446744073709547520
     max-binlog-dump-events                            0
     max-binlog-size                                   1073741824
     max-binlog-stmt-cache-size                        18446744073709547520
     max-connect-errors                                10
     max-connections                                   151
     max-delayed-threads                               20
     max-error-count                                   64
     max-heap-table-size                               16777216
     max-join-size                                     18446744073709551615
     max-length-for-sort-data                          1024
     max-long-data-size                                1048576
     max-prepared-stmt-count                           16382
     max-relay-log-size                                0
     max-seeks-for-key                                 18446744073709551615
     max-sort-length                                   1024
     max-sp-recursion-depth                            0
     max-tmp-tables                                    32
     max-user-connections                              0
     max-write-lock-count                              18446744073709551615
     memlock                                           FALSE
     min-examined-row-limit                            0
     multi-range-count                                 256
     myisam-block-size                                 1024
     myisam-data-pointer-size                          6
     myisam-max-sort-file-size                         9223372036853727232
     myisam-mmap-size                                  18446744073709551615
     myisam-recover-options                            OFF
     myisam-repair-threads                             1
     myisam-sort-buffer-size                           8388608
     myisam-stats-method                               nulls_unequal
     myisam-use-mmap                                   FALSE
     ndb-autoincrement-prefetch-sz                     1
     ndb-batch-size                                    32768
     ndb-blob-read-batch-bytes                         65536
     ndb-blob-write-batch-bytes                        65536
     ndb-cache-check-time                              0
     ndb-cluster-connection-pool                       1
     ndb-connectstring                                 (No default value)
     ndb-deferred-constraints                          0
     ndb-distribution                                  KEYHASH
     ndb-extra-logging                                 1
     ndb-force-send                                    TRUE
     ndb-index-stat-cache-entries                      32
     ndb-index-stat-enable                             TRUE
     ndb-index-stat-option                             loop_checkon=1000ms,loop_idle=1000ms,loop_busy=100ms,update_batch=1,read_batch=4,idle_batch=32,check_batch=32,check_delay=1m,delete_batch=8,clean_delay=0,error_batch=4,error_delay=1m,evict_batch=8,evict_delay=1m,cache_limit=32M,cache_lowpct=90
     ndb-index-stat-update-freq                        20
     ndb-join-pushdown                                 TRUE
     ndb-log-apply-status                              FALSE
     ndb-log-bin                                       TRUE
     ndb-log-binlog-index                              TRUE
     ndb-log-empty-epochs                              FALSE
     ndb-log-orig                                      FALSE
     ndb-log-transaction-id                            FALSE
     ndb-log-update-as-write                           TRUE
     ndb-log-updated-only                              TRUE
     ndb-mgmd-host                                     (No default value)
     ndb-nodeid                                        0
     ndb-optimization-delay                            10
     ndb-optimized-node-selection                      3
     ndb-report-thresh-binlog-epoch-slip               3
     ndb-report-thresh-binlog-mem-usage                10
     ndb-table-no-logging                              FALSE
     ndb-table-temporary                               FALSE
     ndb-use-copying-alter-table                       FALSE
     ndb-use-exact-count                               FALSE
     ndb-use-transactions                              TRUE
     ndb-wait-connected                                0
     ndb-wait-setup                                    15
     ndbcluster                                        ON
     ndbinfo                                           ON
     ndbinfo-database                                  ndbinfo
     ndbinfo-max-bytes                                 0
     ndbinfo-max-rows                                  10
     ndbinfo-show-hidden                               FALSE
     ndbinfo-table-prefix                              ndb$
     net-buffer-length                                 16384
     net-read-timeout                                  30
     net-retry-count                                   10
     net-write-timeout                                 60
     new                                               FALSE
     old                                               FALSE
     old-alter-table                                   FALSE
     old-passwords                                     FALSE
     old-style-user-limits                             FALSE
     open-files-limit                                  1024
     optimizer-prune-level                             1
     optimizer-search-depth                            62
     optimizer-switch                                  index_merge=on,index_merge_union=on,index_merge_sort_union=on,index_merge_intersection=on,engine_condition_pushdown=on
     partition                                         ON
     performance-schema                                FALSE
     performance-schema-events-waits-history-long-size 10000
     performance-schema-events-waits-history-size      10
     performance-schema-max-cond-classes               80
     performance-schema-max-cond-instances             1000
     performance-schema-max-file-classes               50
     performance-schema-max-file-handles               32768
     performance-schema-max-file-instances             10000
     performance-schema-max-mutex-classes              200
     performance-schema-max-mutex-instances            1000000
     performance-schema-max-rwlock-classes             30
     performance-schema-max-rwlock-instances           1000000
     performance-schema-max-table-handles              100000
     performance-schema-max-table-instances            50000
     performance-schema-max-thread-classes             50
     performance-schema-max-thread-instances           1000
     pid-file                                          /home/jon/bin/mysql-5.5-cluster/data/torsk.pid
     plugin-dir                                        /home/jon/bin/mysql-5.5-cluster/lib/plugin
     plugin-load                                       (No default value)
     port                                              3306
     port-open-timeout                                 0
     preload-buffer-size                               32768
     profiling-history-size                            15
     query-alloc-block-size                            8192
     query-cache-limit                                 1048576
     query-cache-min-res-unit                          4096
     query-cache-size                                  0
     query-cache-type                                  ON
     query-cache-wlock-invalidate                      FALSE
     query-prealloc-size                               8192
     range-alloc-block-size                            4096
     read-buffer-size                                  131072
     read-only                                         FALSE
     read-rnd-buffer-size                              262144
     relay-log                                         (No default value)
     relay-log-index                                   (No default value)
     relay-log-info-file                               relay-log.info
     relay-log-purge                                   TRUE
     relay-log-recovery                                FALSE
     relay-log-space-limit                             0
     replicate-same-server-id                          FALSE
     report-host                                       (No default value)
     report-password                                   (No default value)
     report-port                                       3306
     report-user                                       (No default value)
     rpl-recovery-rank                                 0
     safe-user-create                                  FALSE
     secure-auth                                       FALSE
     secure-file-priv                                  (No default value)
     server-id                                         1
     server-id-bits                                    32
     show-slave-auth-info                              FALSE
     skip-grant-tables                                 FALSE
     skip-name-resolve                                 FALSE
     skip-networking                                   FALSE
     skip-show-database                                FALSE
     skip-slave-start                                  FALSE
     slave-allow-batching                              FALSE
     slave-compressed-protocol                         FALSE
     slave-exec-mode                                   STRICT
     slave-load-tmpdir                                 /tmp
     slave-net-timeout                                 3600
     slave-skip-errors                                 (No default value)
     slave-transaction-retries                         10
     slave-type-conversions
     slow-launch-time                                  2
     slow-query-log                                    FALSE
     slow-query-log-file                               /home/jon/bin/mysql-5.5-cluster/data/torsk-slow.log
     socket                                            /tmp/mysql.sock
     sort-buffer-size                                  2097152
     sporadic-binlog-dump-fail                         FALSE
     sql-mode
     ssl                                               FALSE
     ssl-ca                                            (No default value)
     ssl-capath                                        (No default value)
     ssl-cert                                          (No default value)
     ssl-cipher                                        (No default value)
     ssl-key                                           (No default value)
     super-large-pages                                 FALSE
     symbolic-links                                    TRUE
     sync-binlog                                       0
     sync-frm                                          TRUE
     sync-master-info                                  0
     sync-relay-log                                    0
     sync-relay-log-info                               0
     sysdate-is-now                                    FALSE
     table-cache                                       400
     table-definition-cache                            400
     table-open-cache                                  400
     tc-heuristic-recover                              COMMIT
     temp-pool                                         TRUE
     thread-cache-size                                 0
     thread-concurrency                                10
     thread-handling                                   one-thread-per-connection
     thread-stack                                      262144
     time-format                                       %H:%i:%s
     timed-mutexes                                     FALSE
     tmp-table-size                                    16777216
     tmpdir                                            /tmp
     transaction-alloc-block-size                      8192
     transaction-isolation                             REPEATABLE-READ
     transaction-prealloc-size                         4096
     updatable-views-with-limit                        YES
     verbose                                           TRUE
     wait-timeout                                      28800

For a *Note `mysqld': mysqld. server that is currently running, you can
see the current values of its system variables by connecting to it and
issuing this statement:

     mysql> SHOW VARIABLES;

You can also see some statistical and status indicators for a running
server by issuing this statement:

     mysql> SHOW STATUS;

System variable and status information also can be obtained using *Note
`mysqladmin': mysqladmin.:

     shell> mysqladmin variables
     shell> mysqladmin extended-status

For a full description of all system and status variables, see *Note
server-system-variables::, and *Note server-status-variables::.

MySQL uses algorithms that are very scalable, so you can usually run
with very little memory. However, normally you get better performance
by giving MySQL more memory.

When tuning a MySQL server, the two most important variables to
configure are `key_buffer_size' and `table_open_cache'. You should
first feel confident that you have these set appropriately before
trying to change any other variables.

The following examples indicate some typical variable values for
different runtime configurations.

   * If you have at least 256MB of memory and many tables and want
     maximum performance with a moderate number of clients, use
     something like this:

          shell> mysqld_safe --key_buffer_size=64M --table_open_cache=256 \
                     --sort_buffer_size=4M --read_buffer_size=1M &

   * If you have only 128MB of memory and only a few tables, but you
     still do a lot of sorting, you can use something like this:

          shell> mysqld_safe --key_buffer_size=16M --sort_buffer_size=1M

     If there are very many simultaneous connections, swapping problems
     may occur unless *Note `mysqld': mysqld. has been configured to
     use very little memory for each connection.  *Note `mysqld':
     mysqld. performs better if you have enough memory for all
     connections.

   * With little memory and lots of connections, use something like
     this:

          shell> mysqld_safe --key_buffer_size=512K --sort_buffer_size=100K \
                     --read_buffer_size=100K &

     Or even this:

          shell> mysqld_safe --key_buffer_size=512K --sort_buffer_size=16K \
                     --table_open_cache=32 --read_buffer_size=8K \
                     --net_buffer_length=1K &

If you are performing `GROUP BY' or `ORDER BY' operations on tables
that are much larger than your available memory, increase the value of
`read_rnd_buffer_size' to speed up the reading of rows following
sorting operations.

You can make use of the example option files included with your MySQL
distribution; see *Note server-configuration-defaults::.

If you specify an option on the command line for *Note `mysqld':
mysqld. or *Note `mysqld_safe': mysqld-safe, it remains in effect only
for that invocation of the server. To use the option every time the
server runs, put it in an option file.

To see the effects of a parameter change, do something like this:

     shell> mysqld --key_buffer_size=32M --verbose --help

The variable values are listed near the end of the output. Make sure
that the `--verbose' and `--help' options are last.  Otherwise, the
effect of any options listed after them on the command line are not
reflected in the output.

For information on tuning the `InnoDB' storage engine, see *Note
innodb-tuning::.


File: manual.info,  Node: disk-issues,  Next: optimizing-memory,  Prev: server-parameters,  Up: optimizing-the-server

8.11.3 Optimizing Disk I/O
--------------------------

* Menu:

* symbolic-links::               Using Symbolic Links

The *Note `SHOW COLUMNS': show-columns. and The *Note `DESCRIBE':
describe. statements use `BLOB' as the type for some columns, thus the
temporary table used for the results is an on-disk table.

The tips in *Note optimizing-innodb-diskio:: help you get more I/O
performance out of your existing storage configuration. This section
describes ways to configure your storage devices when you can devote
more and faster storage hardware to the database server.

   * Disk seeks are a huge performance bottleneck. This problem becomes
     more apparent when the amount of data starts to grow so large that
     effective caching becomes impossible. For large databases where
     you access data more or less randomly, you can be sure that you
     need at least one disk seek to read and a couple of disk seeks to
     write things. To minimize this problem, use disks with low seek
     times.

   * Increase the number of available disk spindles (and thereby reduce
     the seek overhead) by either symlinking files to different disks
     or striping the disks:

        * Using symbolic links

          This means that, for `MyISAM' tables, you symlink the index
          file and data files from their usual location in the data
          directory to another disk (that may also be striped). This
          makes both the seek and read times better, assuming that the
          disk is not used for other purposes as well. See *Note
          symbolic-links::.

        * Striping

          Striping means that you have many disks and put the first
          block on the first disk, the second block on the second disk,
          and the N-th block on the (`N MOD NUMBER_OF_DISKS') disk, and
          so on. This means if your normal data size is less than the
          stripe size (or perfectly aligned), you get much better
          performance. Striping is very dependent on the operating
          system and the stripe size, so benchmark your application
          with different stripe sizes.  See *Note custom-benchmarks::.

          The speed difference for striping is _very_ dependent on the
          parameters.  Depending on how you set the striping parameters
          and number of disks, you may get differences measured in
          orders of magnitude. You have to choose to optimize for
          random or sequential access.

   * For reliability, you may want to use RAID 0+1 (striping plus
     mirroring), but in this case, you need 2 x N drives to hold N
     drives of data. This is probably the best option if you have the
     money for it.  However, you may also have to invest in some
     volume-management software to handle it efficiently.

   * A good option is to vary the RAID level according to how critical
     a type of data is. For example, store semi-important data that can
     be regenerated on a RAID 0 disk, but store really important data
     such as host information and logs on a RAID 0+1 or RAID N disk.
     RAID N can be a problem if you have many writes, due to the time
     required to update the parity bits.

   * On Linux, you can get much better performance by using `hdparm' to
     configure your disk's interface. (Up to 100% under load is not
     uncommon.) The following `hdparm' options should be quite good for
     MySQL, and probably for many other applications:

          hdparm -m 16 -d 1

     Note that performance and reliability when using this command
     depend on your hardware, so we strongly suggest that you test your
     system thoroughly after using `hdparm'. Please consult the
     `hdparm' manual page for more information.  If `hdparm' is not
     used wisely, file system corruption may result, so back up
     everything before experimenting!

   * You can also set the parameters for the file system that the
     database uses:

     If you do not need to know when files were last accessed (which is
     not really useful on a database server), you can mount your file
     systems with the `-o noatime' option. That skips updates to the
     last access time in inodes on the file system, which avoids some
     disk seeks.

     On many operating systems, you can set a file system to be updated
     asynchronously by mounting it with the `-o async' option. If your
     computer is reasonably stable, this should give you better
     performance without sacrificing too much reliability. (This flag
     is on by default on Linux.)


File: manual.info,  Node: symbolic-links,  Prev: disk-issues,  Up: disk-issues

8.11.3.1 Using Symbolic Links
.............................

* Menu:

* symbolic-links-to-databases::  Using Symbolic Links for Databases on Unix
* symbolic-links-to-tables::     Using Symbolic Links for `MyISAM' Tables on Unix
* windows-symbolic-links::       Using Symbolic Links for Databases on Windows

You can move databases or tables from the database directory to other
locations and replace them with symbolic links to the new locations.
You might want to do this, for example, to move a database to a file
system with more free space or increase the speed of your system by
spreading your tables to different disks.

The recommended way to do this is to symlink entire database
directories to a different disk. Symlink `MyISAM' tables only as a last
resort.

To determine the location of your data directory, use this statement:

     SHOW VARIABLES LIKE 'datadir';


File: manual.info,  Node: symbolic-links-to-databases,  Next: symbolic-links-to-tables,  Prev: symbolic-links,  Up: symbolic-links

8.11.3.2 Using Symbolic Links for Databases on Unix
...................................................

On Unix, the way to symlink a database is first to create a directory
on some disk where you have free space and then to create a soft link
to it from the MySQL data directory.

     shell> mkdir /dr1/databases/test
     shell> ln -s /dr1/databases/test /PATH/TO/DATADIR

MySQL does not support linking one directory to multiple databases.
Replacing a database directory with a symbolic link works as long as
you do not make a symbolic link between databases. Suppose that you
have a database `db1' under the MySQL data directory, and then make a
symlink `db2' that points to `db1':

     shell> cd /PATH/TO/DATADIR
     shell> ln -s db1 db2

The result is that, or any table `tbl_a' in `db1', there also appears
to be a table `tbl_a' in `db2'. If one client updates `db1.tbl_a' and
another client updates `db2.tbl_a', problems are likely to occur.


File: manual.info,  Node: symbolic-links-to-tables,  Next: windows-symbolic-links,  Prev: symbolic-links-to-databases,  Up: symbolic-links

8.11.3.3 Using Symbolic Links for `MyISAM' Tables on Unix
.........................................................

Symlinks are fully supported only for `MyISAM' tables. For files used
by tables for other storage engines, you may get strange problems if
you try to use symbolic links.

Do not symlink tables on systems that do not have a fully operational
`realpath()' call. (Linux and Solaris support `realpath()'). To
determine whether your system supports symbolic links, check the value
of the `have_symlink' system variable using this statement:

     SHOW VARIABLES LIKE 'have_symlink';

The handling of symbolic links for `MyISAM' tables works as follows:

   * In the data directory, you always have the table format (`.frm')
     file, the data (`.MYD') file, and the index (`.MYI') file. The
     data file and index file can be moved elsewhere and replaced in the
     data directory by symlinks. The format file cannot.

   * You can symlink the data file and the index file independently to
     different directories.

   * To instruct a running MySQL server to perform the symlinking, use
     the `DATA DIRECTORY' and `INDEX DIRECTORY' options to *Note
     `CREATE TABLE': create-table. See *Note create-table::.
     Alternatively, if *Note `mysqld': mysqld. is not running,
     symlinking can be accomplished manually using `ln -s' from the
     command line.

     *Note*:

     The path used with either or both of the `DATA DIRECTORY' and
     `INDEX DIRECTORY' options may not include the MySQL `data'
     directory. (Bug #32167)

   * *Note `myisamchk': myisamchk. does not replace a symlink with the
     data file or index file. It works directly on the file to which
     the symlink points. Any temporary files are created in the
     directory where the data file or index file is located. The same
     is true for the *Note `ALTER TABLE': alter-table, *Note `OPTIMIZE
     TABLE': optimize-table, and *Note `REPAIR TABLE': repair-table.
     statements.

   * *Note*:

     When you drop a table that is using symlinks, _both the symlink
     and the file to which the symlink points are dropped_. This is an
     extremely good reason _not_ to run *Note `mysqld': mysqld. as the
     system `root' or permit system users to have write access to MySQL
     database directories.

   * If you rename a table with *Note `ALTER TABLE ... RENAME':
     alter-table. or *Note `RENAME TABLE': rename-table. and you do not
     move the table to another database, the symlinks in the database
     directory are renamed to the new names and the data file and index
     file are renamed accordingly.

   * If you use *Note `ALTER TABLE ... RENAME': alter-table. or *Note
     `RENAME TABLE': rename-table. to move a table to another database,
     the table is moved to the other database directory. If the table
     name changed, the symlinks in the new database directory are
     renamed to the new names and the data file and index file are
     renamed accordingly.

   * If you are not using symlinks, start *Note `mysqld': mysqld. with
     the `--skip-symbolic-links' option to ensure that no one can use
     *Note `mysqld': mysqld. to drop or rename a file outside of the
     data directory.

These table symlink operations are not supported:

   * *Note `ALTER TABLE': alter-table. ignores the `DATA DIRECTORY' and
     `INDEX DIRECTORY' table options.

   * As indicated previously, only the data and index files can be
     symbolic links. The `.frm' file must _never_ be a symbolic link.
     Attempting to do this (for example, to make one table name a
     synonym for another) produces incorrect results.  Suppose that you
     have a database `db1' under the MySQL data directory, a table
     `tbl1' in this database, and in the `db1' directory you make a
     symlink `tbl2' that points to `tbl1':

          shell> cd /PATH/TO/DATADIR/db1
          shell> ln -s tbl1.frm tbl2.frm
          shell> ln -s tbl1.MYD tbl2.MYD
          shell> ln -s tbl1.MYI tbl2.MYI

     Problems result if one thread reads `db1.tbl1' and another thread
     updates `db1.tbl2':

        * The query cache is `fooled' (it has no way of knowing that
          `tbl1' has not been updated, so it returns outdated results).

        * `ALTER' statements on `tbl2' fail.


File: manual.info,  Node: windows-symbolic-links,  Prev: symbolic-links-to-tables,  Up: symbolic-links

8.11.3.4 Using Symbolic Links for Databases on Windows
......................................................

On Windows, symbolic links can be used for database directories. This
enables you to put a database directory at a different location (for
example, on a different disk) by setting up a symbolic link to it. Use
of database symlinks on Windows is similar to their use on Unix,
although the procedure for setting up the link differs.

Suppose that you want to place the database directory for a database
named `mydb' at `D:\data\mydb'. To do this, create a symbolic link in
the MySQL data directory that points to `D:\data\mydb'. However, before
creating the symbolic link, make sure that the `D:\data\mydb' directory
exists by creating it if necessary. If you already have a database
directory named `mydb' in the data directory, move it to `D:\data'.
Otherwise, the symbolic link will be ineffective. To avoid problems,
make sure that the server is not running when you move the database
directory.

The procedure for creating the database symbolic link depends on your
version of Windows.

Windows Vista, Windows Server 2008, or newer have native symbolic link
support, so you can create a symlink using the `mklink' command. This
command requires administrative privileges.

  1. Change location into the data directory:

          C:\> cd \PATH\TO\DATADIR

  2. In the data directory, create a symlink named `mydb' that points
     to the location of the database directory:

          C:\> mklink /d mydb D:\data\mydb

After this, all tables created in the database `mydb' are created in
`D:\data\mydb'.

Alternatively, on any version of Windows supported by MySQL, you can
create a symbolic link to a MySQL database by creating a `.sym' file in
the data directory that contains the path to the destination directory.
The file should be named `DB_NAME.sym', where DB_NAME is the database
name.

Support for database symbolic links on Windows using `.sym' files is
enabled by default. If you do not need `.sym' file symbolic links, you
can disable support for them by starting *Note `mysqld': mysqld. with
the `--skip-symbolic-links' option. To determine whether your system
supports `.sym' file symbolic links, check the value of the
`have_symlink' system variable using this statement:

     SHOW VARIABLES LIKE 'have_symlink';

To create a `.sym' file symlink, use this procedure:

  1. Change location into the data directory:

          C:\> cd \PATH\TO\DATADIR

  2. In the data directory, create a text file named `mydb.sym' that
     contains this path name: `D:\data\mydb\'

     *Note*:

     The path name to the new database and tables should be absolute.
     If you specify a relative path, the location will be relative to
     the `mydb.sym' file.

After this, all tables created in the database `mydb' are created in
`D:\data\mydb'.

The following limitations apply to the use of `.sym' files for database
symbolic linking on Windows. These limitations do not apply for
symlinks created using `mklink'.

   * The symbolic link is not used if a directory with the same name as
     the database exists in the MySQL data directory.

   * The `--innodb_file_per_table' option cannot be used.

   * If you run *Note `mysqld': mysqld. as a service, you cannot use a
     mapped drive to a remote server as the destination of the symbolic
     link. As a workaround, you can use the full path
     (`\\servername\path\').


File: manual.info,  Node: optimizing-memory,  Next: optimizing-network,  Prev: disk-issues,  Up: optimizing-the-server

8.11.4 Optimizing Memory Use
----------------------------

* Menu:

* memory-use::                   How MySQL Uses Memory
* large-page-support::           Enabling Large Page Support


File: manual.info,  Node: memory-use,  Next: large-page-support,  Prev: optimizing-memory,  Up: optimizing-memory

8.11.4.1 How MySQL Uses Memory
..............................

The following list indicates some of the ways that the *Note `mysqld':
mysqld. server uses memory. Where applicable, the name of the system
variable relevant to the memory use is given:

   * All threads share the *Note `MyISAM': myisam-storage-engine.  key
     buffer; its size is determined by the `key_buffer_size' variable.
     Other buffers used by the server are allocated as needed.  See
     *Note server-parameters::.

   * Each thread that is used to manage client connections uses some
     thread-specific space. The following list indicates these and
     which variables control their size:

        * A stack (variable `thread_stack')

        * A connection buffer (variable `net_buffer_length')

        * A result buffer (variable `net_buffer_length')

     The connection buffer and result buffer each begin with a size
     equal to `net_buffer_length' bytes, but are dynamically enlarged
     up to `max_allowed_packet' bytes as needed. The result buffer
     shrinks to `net_buffer_length' bytes after each SQL statement.
     While a statement is running, a copy of the current statement
     string is also allocated.

   * All threads share the same base memory.

   * When a thread is no longer needed, the memory allocated to it is
     released and returned to the system unless the thread goes back
     into the thread cache. In that case, the memory remains allocated.

   * The `myisam_use_mmap' system variable can be set to 1 to enable
     memory-mapping for all `MyISAM' tables.

   * Each request that performs a sequential scan of a table allocates
     a _read buffer_ (variable `read_buffer_size').

   * When reading rows in an arbitrary sequence (for example, following
     a sort), a _random-read buffer_ (variable `read_rnd_buffer_size')
     may be allocated to avoid disk seeks.

   * All joins are executed in a single pass, and most joins can be
     done without even using a temporary table. Most temporary tables
     are memory-based hash tables. Temporary tables with a large row
     length (calculated as the sum of all column lengths) or that
     contain *Note `BLOB': blob. columns are stored on disk.

     If an internal in-memory temporary table becomes too large, MySQL
     handles this automatically by changing the table from in-memory to
     on-disk format, to be handled by the `MyISAM' storage engine. You
     can increase the permissible temporary table size as described in
     *Note internal-temporary-tables::.

   * Most requests that perform a sort allocate a sort buffer and zero
     to two temporary files depending on the result set size. See *Note
     temporary-files::.

   * Almost all parsing and calculating is done in thread-local and
     reusable memory pools. No memory overhead is needed for small
     items, so the normal slow memory allocation and freeing is
     avoided. Memory is allocated only for unexpectedly large strings.

   * For each `MyISAM' table that is opened, the index file is opened
     once; the data file is opened once for each concurrently running
     thread. For each concurrent thread, a table structure, column
     structures for each column, and a buffer of size `3 * N' are
     allocated (where N is the maximum row length, not counting *Note
     `BLOB': blob.  columns). A *Note `BLOB': blob. column requires
     five to eight bytes plus the length of the *Note `BLOB': blob.
     data. The `MyISAM' storage engine maintains one extra row buffer
     for internal use.

   * For each table having *Note `BLOB': blob.  columns, a buffer is
     enlarged dynamically to read in larger *Note `BLOB': blob. values.
     If you scan a table, a buffer as large as the largest *Note
     `BLOB': blob. value is allocated.

   * Handler structures for all in-use tables are saved in a cache and
     managed as a FIFO. The initial cache size is taken from the value
     of the `table_open_cache' system variable. If a table has been
     used by two running threads at the same time, the cache contains
     two entries for the table. See *Note table-cache::.

   * A *Note `FLUSH TABLES': flush. statement or *Note `mysqladmin
     flush-tables': mysqladmin. command closes all tables that are not
     in use at once and marks all in-use tables to be closed when the
     currently executing thread finishes. This effectively frees most
     in-use memory.  *Note `FLUSH TABLES': flush. does not return until
     all tables have been closed.

   * The server caches information in memory as a result of *Note
     `GRANT': grant, *Note `CREATE USER': create-user, *Note `CREATE
     SERVER': create-server, and *Note `INSTALL PLUGIN':
     install-plugin. statements.  This memory is not released by the
     corresponding *Note `REVOKE': revoke, *Note `DROP USER': drop-user,
     *Note `DROP SERVER': drop-server, and *Note `UNINSTALL PLUGIN':
     uninstall-plugin.  statements, so for a server that executes many
     instances of the statements that cause caching, there will be an
     increase in memory use. This cached memory can be freed with *Note
     `FLUSH PRIVILEGES': flush.

`ps' and other system status programs may report that *Note `mysqld':
mysqld. uses a lot of memory.  This may be caused by thread stacks on
different memory addresses. For example, the Solaris version of `ps'
counts the unused memory between stacks as used memory. To verify this,
check available swap with `swap -s'. We test *Note `mysqld': mysqld.
with several memory-leakage detectors (both commercial and Open
Source), so there should be no memory leaks.


File: manual.info,  Node: large-page-support,  Prev: memory-use,  Up: optimizing-memory

8.11.4.2 Enabling Large Page Support
....................................

Some hardware/operating system architectures support memory pages
greater than the default (usually 4KB). The actual implementation of
this support depends on the underlying hardware and operating system.
Applications that perform a lot of memory accesses may obtain
performance improvements by using large pages due to reduced
Translation Lookaside Buffer (TLB) misses.

In MySQL, large pages can be used by InnoDB, to allocate memory for its
buffer pool and additional memory pool.

Standard use of large pages in MySQL attempts to use the largest size
supported, up to 4MB. Under Solaris, a `super large pages' feature
enables uses of pages up to 256MB. This feature is available for recent
SPARC platforms. It can be enabled or disabled by using the
`--super-large-pages' or `--skip-super-large-pages' option.

MySQL also supports the Linux implementation of large page support
(which is called HugeTLB in Linux).

Before large pages can be used on Linux, the kernel must be enabled to
support them and it is necessary to configure the HugeTLB memory pool.
For reference, the HugeTBL API is documented in the
`Documentation/vm/hugetlbpage.txt' file of your Linux sources.

The kernel for some recent systems such as Red Hat Enterprise Linux
appear to have the large pages feature enabled by default. To check
whether this is true for your kernel, use the following command and
look for output lines containing `huge':

     shell> cat /proc/meminfo | grep -i huge
     HugePages_Total:       0
     HugePages_Free:        0
     HugePages_Rsvd:        0
     HugePages_Surp:        0
     Hugepagesize:       4096 kB

The nonempty command output indicates that large page support is
present, but the zero values indicate that no pages are configured for
use.

If your kernel needs to be reconfigured to support large pages, consult
the `hugetlbpage.txt' file for instructions.

Assuming that your Linux kernel has large page support enabled,
configure it for use by MySQL using the following commands. Normally,
you put these in an `rc' file or equivalent startup file that is
executed during the system boot sequence, so that the commands execute
each time the system starts. The commands should execute early in the
boot sequence, before the MySQL server starts. Be sure to change the
allocation numbers and the group number as appropriate for your system.

     # Set the number of pages to be used.
     # Each page is normally 2MB, so a value of 20 = 40MB.
     # This command actually allocates memory, so this much
     # memory must be available.
     echo 20 > /proc/sys/vm/nr_hugepages

     # Set the group number that is permitted to access this
     # memory (102 in this case). The mysql user must be a
     # member of this group.
     echo 102 > /proc/sys/vm/hugetlb_shm_group

     # Increase the amount of shmem permitted per segment
     # (12G in this case).
     echo 1560281088 > /proc/sys/kernel/shmmax

     # Increase total amount of shared memory.  The value
     # is the number of pages. At 4KB/page, 4194304 = 16GB.
     echo 4194304 > /proc/sys/kernel/shmall

For MySQL usage, you normally want the value of `shmmax' to be close to
the value of `shmall'.

To verify the large page configuration, check `/proc/meminfo' again as
described previously. Now you should see some nonzero values:

     shell> cat /proc/meminfo | grep -i huge
     HugePages_Total:      20
     HugePages_Free:       20
     HugePages_Rsvd:        0
     HugePages_Surp:        0
     Hugepagesize:       4096 kB

The final step to make use of the `hugetlb_shm_group' is to give the
`mysql' user an `unlimited' value for the memlock limit. This can by
done either by editing `/etc/security/limits.conf' or by adding the
following command to your *Note `mysqld_safe': mysqld-safe. script:

     ulimit -l unlimited

Adding the `ulimit' command to *Note `mysqld_safe': mysqld-safe. causes
the `root' user to set the memlock limit to `unlimited' before
switching to the `mysql' user. (This assumes that *Note `mysqld_safe':
mysqld-safe. is started by `root'.)

Large page support in MySQL is disabled by default. To enable it, start
the server with the `--large-pages' option. For example, you can use
the following lines in your server's `my.cnf' file:

     [mysqld]
     large-pages

With this option, `InnoDB' uses large pages automatically for its
buffer pool and additional memory pool.  If `InnoDB' cannot do this, it
falls back to use of traditional memory and writes a warning to the
error log: `Warning: Using conventional memory pool'

To verify that large pages are being used, check `/proc/meminfo' again:

     shell> cat /proc/meminfo | grep -i huge
     HugePages_Total:      20
     HugePages_Free:       20
     HugePages_Rsvd:        2
     HugePages_Surp:        0
     Hugepagesize:       4096 kB


File: manual.info,  Node: optimizing-network,  Next: thread-pool-plugin,  Prev: optimizing-memory,  Up: optimizing-the-server

8.11.5 Optimizing Network Use
-----------------------------

* Menu:

* connection-threads::           How MySQL Uses Threads for Client Connections
* host-cache::                   DNS Lookup Optimization and the Host Cache


File: manual.info,  Node: connection-threads,  Next: host-cache,  Prev: optimizing-network,  Up: optimizing-network

8.11.5.1 How MySQL Uses Threads for Client Connections
......................................................

Connection manager threads handle client connection requests on the
network interfaces that the server listens to. On all platforms, one
manager thread handles TCP/IP connection requests. On Unix, this
manager thread also handles Unix socket file connection requests. On
Windows, a manager thread handles shared-memory connection requests,
and another handles named-pipe connection requests. The server does not
create threads to handle interfaces that it does not listen to. For
example, a Windows server that does not have support for named-pipe
connections enabled does not create a thread to handle them.

By default, connection manager threads associate each client connection
with a thread dedicated to it that handles authentication and request
processing for that connection.  Manager threads create a new thread
when necessary but try to avoid doing so by consulting the thread cache
first to see whether it contains a thread that can be used for the
connection. When a connection ends, its thread is returned to the
thread cache if the cache is not full.

In the default connection thread model, there are as many threads as
there are clients currently connected, which has some disadvantages
when server workload must scale to handle large numbers of connections.
For example, thread creation and disposal becomes expensive. Also, each
thread requires server and kernel resources, such as stack space. To
accommodate a large number of simultaneous connections, the stack size
per thread must be kept small, leading to a situation where it is
either too small or the server consumes large amounts of memory.
Exhaustion of other resources can occur as well, and scheduling
overhead can become significant.

As of MySQL 5.5.16, commercial distributions of MySQL 5.5 include a
thread pool plugin that provides an alternative thread-handling model
designed to reduce overhead and improve performance. It implements a
thread pool that increases server performance by efficiently managing
statement execution threads for large numbers of client connections. See
*Note thread-pool-plugin::.

To control and monitor how the server manages threads that handle
client connections, several system and status variables are relevant.
(See *Note server-system-variables::, and *Note
server-status-variables::.)

The thread cache has a size determined by the `thread_cache_size' system
variable. The default value is 0 (no caching), which causes a thread to
be set up for each new connection and disposed of when the connection
terminates. Set `thread_cache_size' to N to enable N inactive
connection threads to be cached. `thread_cache_size' can be set at
server startup or changed while the server runs. A connection thread
becomes inactive when the client connection with which it was
associated terminates.

To monitor the number of threads in the cache and how many threads have
been created because a thread could not be taken from the cache,
monitor the `Threads_cached' and `Threads_created' status variables.

You can set `max_connections' at server startup or at runtime to
control the maximum number of clients that can connect simultaneously.

When the thread stack is too small, this limits the complexity of the
SQL statements which the server can handle, the recursion depth of
stored procedures, and other memory-consuming actions. To set a stack
size of N bytes for each thread, start the server with
`--thread_stack=N'.


File: manual.info,  Node: host-cache,  Prev: connection-threads,  Up: optimizing-network

8.11.5.2 DNS Lookup Optimization and the Host Cache
...................................................

The MySQL server maintains a host cache in memory that contains
information about clients: IP address, host name, and error
information. The server uses this cache for nonlocal TCP connections.
It does not use the cache for TCP connections established using a
loopback interface address (`127.0.0.1' or `::1'), or for connections
established using a Unix socket file, named pipe, or shared memory.

For each new client connection, the server uses the client IP address
to check whether the client host name is in the host cache. If not, the
server attempts to resolve the host name.  First, it resolves the IP
address to a host name and resolves that host name back to an IP
address. Then it compares the result to the original IP address to
ensure that they are the same. The server stores information about the
result of this operation in the host cache. If the cache is full, the
least recently used entry is discarded.

The server performs host name resolution using the thread-safe
`gethostbyaddr_r()' and `gethostbyname_r()' calls if the operating
system supports them. Otherwise, the thread performing the lookup locks
a mutex and calls `gethostbyaddr()' and `gethostbyname()' instead. In
this case, no other thread can resolve host names that are not in the
host cache until the thread holding the mutex lock releases it.

The server uses the host cache for several purposes:

   * By caching the results of IP-to-host name lookups, the server
     avoids doing a DNS lookup for each client connection. Instead, for
     a given host, it needs to perform a lookup only for the first
     connection from that host.

   * The cache contains information about errors that occur during the
     connection process. Some errors are considered `blocking.' If too
     many of these occur successively from a given host without a
     successful connection, the server blocks further connections from
     that host. The `max_connect_errors' system variable determines the
     number of permitted errors before blocking occurs. See *Note
     blocked-host::.

To unblock blocked hosts, flush the host cache by issuing a *Note
`FLUSH HOSTS': flush.  statement or executing a *Note `mysqladmin
flush-hosts': mysqladmin. command.

It is possible for a blocked host to become unblocked even without
*Note `FLUSH HOSTS': flush. if activity from other hosts has occurred
since the last connection attempt from the blocked host. This can occur
because the server discards the least recently used cache entry to make
room for a new entry if the cache is full when a connection arrives
from a client IP not in the cache.  If the discarded entry is for a
blocked host, that host becomes unblocked.

The host cache is enabled by default. To disable it, start the server
with the `--skip-host-cache' option.

To disable DNS host name lookups, start the server with the
`--skip-name-resolve' option. In this case, the server uses only IP
addresses and not host names to match connecting hosts to rows in the
MySQL grant tables. Only accounts specified in those tables using IP
addresses can be used.

If you have a very slow DNS and many hosts, you might be able to
improve performance either by disabling DNS lookups with
`--skip-name-resolve' or by increasing the `HOST_CACHE_SIZE' define
(default value: 128) and recompiling the server

To disallow TCP/IP connections entirely, start the server with the
`--skip-networking' option.

Some connection errors are not associated with TCP connections, occur
very early in the connection process (even before an IP address is
known), or are not specific to any particular IP address (such as
out-of-memory conditions).


File: manual.info,  Node: thread-pool-plugin,  Prev: optimizing-network,  Up: optimizing-the-server

8.11.6 The Thread Pool Plugin
-----------------------------

* Menu:

* thread-pool-installation::     Thread Pool Components and Installation
* thread-pool-operation::        Thread Pool Operation
* thread-pool-tuning::           Thread Pool Tuning

*Note*:

MySQL Thread Pool is a commercial extension. To learn more about
commercial products (MySQL Enterprise Edition), see
http://www.mysql.com/products/.

As of MySQL 5.5.16, commercial distributions of MySQL 5.5 include MySQL
Thread Pool, implemented using a server plugin. The default
thread-handling model in MySQL Server executes statements using one
thread per client connection. As more clients connect to the server and
execute statements, overall performance degrades. The thread pool
plugin provides an alternative thread-handling model designed to reduce
overhead and improve performance. The plugin implements a thread pool
that increases server performance by efficiently managing statement
execution threads for large numbers of client connections.

The thread pool addresses several problems of the one thread per
connection model:

   * Too many thread stacks make CPU caches almost useless in highly
     parallel execution workloads. The thread pool promotes thread
     stack reuse to minimize the CPU cache footprint.

   * With too many threads executing in parallel, context switching
     overhead is high. This also presents a challenging task to the
     operating system scheduler. The thread pool controls the number of
     active threads to keep the parallelism within the MySQL server at
     a level that it can handle and that is appropriate for the server
     host on which MySQL is executing.

   * Too many transactions executing in parallel increases resource
     contention. In *Note `InnoDB': innodb-storage-engine, this
     increases the time spent holding central mutexes. The thread pool
     controls when transactions start to ensure that not too many
     execute in parallel.

The thread pool plugin is a commercial feature. It is not included in
MySQL community distributions.

On Windows, the thread pool plugin requires Windows Vista or newer. On
Linux, the plugin requires kernel 2.6.9 or newer.

* Additional Resources *

*Note faqs-thread-pool::


File: manual.info,  Node: thread-pool-installation,  Next: thread-pool-operation,  Prev: thread-pool-plugin,  Up: thread-pool-plugin

8.11.6.1 Thread Pool Components and Installation
................................................

The thread pool feature comprises these components:

   * A plugin library object file contains a plugin for the thread pool
     code and plugins for several `INFORMATION_SCHEMA' tables.

     For a detailed description of how the thread pool works, see *Note
     thread-pool-operation::.

     The `INFORMATION_SCHEMA' tables are named *Note `TP_THREAD_STATE':
     tp-thread-state-table, *Note `TP_THREAD_GROUP_STATE':
     tp-thread-group-state-table, and *Note `TP_THREAD_GROUP_STATS':
     tp-thread-group-stats-table. These tables provide information
     about thread pool operation.  For more information, see *Note
     thread-pool-i_s-tables::.

   * Several system variables are related to the thread pool.  The
     `thread_handling' system variable has a value of
     `loaded-dynamically' when the server successfully loads the thread
     pool plugin.

     The other related variables are implemented by the thread pool
     plugin; they are not available unless it is enabled:

        * `thread_pool_algorithm': The concurrency algorithm to use for
          scheduling.

        * `thread_pool_high_priority_connection': How to schedule
          statement execution for a session.

        * `thread_pool_prio_kickup_timer': How long before the thread
          pool moves a statement awaiting execution from the
          low-priority queue to the high-priority queue.

        * `thread_pool_max_unused_threads': How many sleeping threads
          to permit.

        * `thread_pool_size': The number of thread groups in the thread
          pool. This is the most important parameter controlling thread
          pool performance.

        * `thread_pool_stall_limit': The time before an executing
          statement is considered to be stalled.

     If any variable implemented by the plugin is set to an illegal
     value at startup, plugin initialization fails and the plugin does
     not load.

     For information about setting thread pool parameters, see *Note
     thread-pool-tuning::.

   * The Performance Schema exposes information about the thread pool
     and may be used to investigate operational performance. For more
     information, see *Note performance-schema::.

To be usable by the server, the thread pool library object file must be
located in the MySQL plugin directory (the directory named by the
`plugin_dir' system variable).  To enable thread pool capability, load
the plugins to be used by starting the server with the `--plugin-load'
option. For example, if you name just the plugin object file, the server
loads all plugins that it contains (that is, the thread pool plugin and
all the `INFORMATION_SCHEMA' tables). To do this, put these lines in
your `my.cnf' file:

     [mysqld]
     plugin-load=thread_pool.so

If object files have a suffix different from `.so' on your system,
substitute the correct suffix (for example, `.dll' on Windows).

If necessary, set the value of the `plugin_dir' system variable to tell
the server the location of the plugin directory.

If desired, you can load individual plugins from the library file. To
load the thread pool plugin but not the `INFORMATION_SCHEMA' tables,
use an option like this:

     [mysqld]
     plugin-load=thread_pool=thread_pool.so

To load the thread pool plugin and only the *Note `TP_THREAD_STATE':
tp-thread-state-table.  `INFORMATION_SCHEMA' table, use an option like
this:

     [mysqld]
     plugin-load=thread_pool=thread_pool.so;TP_THREAD_STATE=thread_pool.so

To verify plugin installation, examine the *Note
`INFORMATION_SCHEMA.PLUGINS': plugins-table. table or use the *Note
`SHOW PLUGINS': show-plugins.  statement. See *Note
obtaining-plugin-information::.

If the server loads the thread plugin successfully, it sets the
`thread_handling' system variable to `dynamically-loaded'. If the
plugin fails to load, the server writes a message to the error log.


File: manual.info,  Node: thread-pool-operation,  Next: thread-pool-tuning,  Prev: thread-pool-installation,  Up: thread-pool-plugin

8.11.6.2 Thread Pool Operation
..............................

The thread pool consists of a number of thread groups, each of which
manages a set of client connections. As connections are established,
the thread pool assigns them to thread groups in round-robin fashion.

The number of thread groups is configurable using the
`thread_pool_size' system variable. The default number of groups is 16.
For guidelines on setting this variable, see *Note thread-pool-tuning::.

The maximum number of threads per group is 4096 (or 4095 on some
systems where one thread is used internally).

The thread pool separates connections and threads, so there is no fixed
relationship between connections and the threads that execute
statements received from those connections. This differs from the
default thread-handling model that associates one thread with one
connection such that the thread executes all statements from the
connection.

The thread pool tries to ensure a maximum of one thread executing in
each group at any time, but sometimes permits more threads to execute
temporarily for best performance. The algorithm works in the following
manner:

   * Each thread group has a listener thread that listens for incoming
     statements from the connections assigned to the group. When a
     statement arrives, the thread group either begins executing it
     immediately or queues it for later execution:

        * Immediate execution occurs if the statement is the only one
          received and no statements are queued or currently executing.

        * Queuing occurs if the statement cannot begin executing
          immediately.

   * If immediate execution occurs, execution is performed by the
     listener thread. (This means that temporarily no thread in the
     group is listening.) If the statement finishes quickly, the
     executing thread returns to listening for statements. Otherwise,
     the thread pool considers the statement stalled and starts another
     thread as a listener thread (creating it if necessary). To ensure
     that no thread group becomes blocked by stalled statements, the
     thread pool has a background thread that regularly monitors thread
     group states.

     By using the listening thread to execute a statement that can
     begin immediately, there is no need to create an additional thread
     if the statement finishes quickly. This ensures the most efficient
     execution possible in the case of a low number of concurrent
     threads.

     When the thread pool plugin starts, it creates one thread per
     group (the listener thread), plus the background thread.
     Additional threads are created as necessary to execute statements.

   * The value of the `thread_pool_stall_limit' system variable
     determines the meaning of `finishes quickly' in the previous item.
     The default time before threads are considered stalled is 60ms but
     can be set to a maximum of 6s. This parameter is configurable to
     enable you to strike a balance appropriate for the server work
     load. Short wait values permit threads to start more quickly.
     Short values are also better for avoiding deadlock situations.
     Long wait values are useful for workloads that include
     long-running statements, to avoid starting too many new statements
     while the current ones execute.

   * The thread pool focuses on limiting the number of concurrent
     short-running statements. Before an executing statement reaches
     the stall time, it prevents other statements from beginning to
     execute. If the statement executes past the stall time, it is
     permitted to continue but no longer prevents other statements from
     starting. In this way, the thread pool tries to ensure that in each
     thread group there is never more than one short-running statement,
     although there might be multiple long-running statements. It is
     undesirable to let long-running statements prevent other
     statements from executing because there is no limit on the amount
     of waiting that might be necessary. For example, on a replication
     master, a thread that is sending binary log events to a slave
     effectively runs forever.

   * A statement becomes blocked if it encounters a disk I/O operation
     or a user level lock (row lock or table lock).  The block would
     cause the thread group to become unused, so there are callbacks to
     the thread pool to ensure that the thread pool can immediately
     start a new thread in this group to execute another statement.
     When a blocked thread returns, the thread pool permits it to
     restart immediately.

   * There are two queues, a high-priority queue and a low-priority
     queue. The first statement in a transaction goes to the
     low-priority queue. Any following statements for the transaction
     go to the high-priority queue if the transaction is ongoing
     (statements for it have begun executing), or to the low-priority
     queue otherwise. Queue assignment can be affected by enabling the
     `thread_pool_high_priority_connection' system variable, which
     causes all queued statements for a session to go into the
     high-priority queue.

     Statements for a nontransactional storage engine, or a
     transactional engine if `autocommit' is enabled, are treated as
     low-priority statements because in this case each statement is a
     transaction. Thus, given a mix of statements for `InnoDB' and
     `MyISAM' tables, the thread pool prioritizes those for `InnoDB'
     over those for `MyISAM' unless `autocommit' is enabled.  With
     `autocommit' enabled, all statements will be low priority.

   * When the thread group selects a queued statement for execution, it
     first looks in the high-priority queue, then in the low-priority
     queue. If a statement is found, it is removed from its queue and
     begins to execute.

   * If a statement stays in the low-priority queue too long, the
     thread pool moves to the high-priority queue. The value of the
     `thread_pool_prio_kickup_timer' system variable controls the time
     before movement. For each thread group, a maximum of one statement
     per 10ms or 100 per second will be moved from the low-priority
     queue to the high-priority queue.

   * The thread pool reuses the most active threads to obtain a much
     better use of CPU caches. This is a small adjustment that has a
     great impact on performance.

   * While a thread executes a statement from a user connection,
     Performance Schema instrumentation accounts thread activity to the
     user connection. Otherwise, Performance Schema accounts activity
     to the thread pool.

Here are examples of conditions under which a thread group might have
multiple threads started to execute statements:

   * One thread begins executing a statement, but runs long enough to
     be considered stalled. The thread group permits another thread to
     begin executing another statement even through the first thread is
     still executing.

   * One thread begins executing a statement, then becomes blocked and
     reports this back to the thread pool. The thread group permits
     another thread to begin executing another statement.

   * One thread begins executing a statement, becomes blocked, but does
     not report back that it is blocked because the block does not
     occur in code that has been instrumented with thread pool
     callbacks. In this case, the thread appears to the thread group to
     be still running. If the block lasts long enough for the statement
     to be considered stalled, the group permits another thread to begin
     executing another statement.

The thread pool is designed to be scalable across an increasing number
of connections. It is also designed to avoid deadlocks that can arise
from limiting the number of actively executing statements. It is
important that threads that do not report back to the thread pool do
not prevent other statements from executing and thus cause the thread
pool to become deadlocked. Examples of such statements follow:

   * Long-running statements. These would lead to all resources used by
     only a few statements and they could prevent all others from
     accessing the server.

   * Binary log dump threads that read the binary log and send it to
     slaves. This is a kind of long-running `statement' that runs for a
     very long time, and that should not prevent other statements from
     executing.

   * Statements blocked on a row lock, table lock, sleep, or any other
     blocking activity that has not been reported back to the thread
     pool by MySQL Server or a storage engine.

In each case, to prevent deadlock, the statement is moved to the
stalled category when it does not complete quickly, so that the thread
group can permit another statement to begin executing. With this
design, when a thread executes or becomes blocked for an extended time,
the thread pool moves the thread to the stalled category and for the
rest of the statement's execution, it does not prevent other statements
from executing.

The maximum number of threads that can occur is the sum of
`max_connections' and `thread_pool_size'. This can happen in a
situation where all connections are in execution mode and an extra
thread is created per group to listen for more statements. This is not
necessarily a state that happens often, but it is theoretically
possible.


File: manual.info,  Node: thread-pool-tuning,  Prev: thread-pool-operation,  Up: thread-pool-plugin

8.11.6.3 Thread Pool Tuning
...........................

This section provides guidelines on setting thread pool system
variables for best performance, measured using a metric such as
transactions per second.

`thread_pool_size' is the most important parameter controlling thread
pool performance. It can be set only at server startup. Our experience
in testing the thread pool indicates the following:

   * If the primary storage engine is `InnoDB', the optimal
     `thread_pool_size' setting is likely to be between 16 and 36, with
     the most common optimal values tending to be from 24 to 36. We
     have not seen any situation where the setting has been optimal
     beyond 36. There may be special cases where a value smaller than
     16 is optimal.

     For workloads such as DBT2 and Sysbench, the optimum for *Note
     `InnoDB': innodb-storage-engine. seems to be usually around 36.
     For very write-intensive workloads, the optimal setting can
     sometimes be lower.

   * If the primary storage engine is *Note `MyISAM':
     myisam-storage-engine, the `thread_pool_size' setting should be
     fairly low. We tend to get optimal performance for values from 4
     to 8. Higher values tend to have a slightly negative but not
     dramatic impact on performance.

Another system variable, `thread_pool_stall_limit', is important for
handling of blocked and long-running statements.  If all calls that
block the MySQL Server are reported to the thread pool, it would always
know when execution threads are blocked. However, this may not always
be true. For example, blocks could occur in code that has not been
instrumented with thread pool callbacks. For such cases, the thread
pool must be able to identify threads that appear to be blocked. This is
done by means of a timeout, the length of which can be tuned using the
`thread_pool_stall_limit' system variable. This parameter ensures that
the server does not become completely blocked. The value of
`thread_pool_stall_limit' has an upper limit of 6 seconds to prevent
the risk of a deadlocked server.

`thread_pool_stall_limit' also enables the thread pool to handle
long-running statements. If a long-running statement was permitted to
block a thread group, all other connections assigned to the group would
be blocked and unable to start execution until the long-running
statement completed. In the worst case, this could take hours or even
days.

The value of `thread_pool_stall_limit' should be chosen such that
statements that execute longer than its value are considered stalled.
Stalled statements generate a lot of extra overhead since they involve
extra context switches and in some cases even extra thread creations.
On the other hand, setting the `thread_pool_stall_limit' parameter too
high means that long-running statements will block a number of
short-running statements for longer than necessary. Short wait values
permit threads to start more quickly. Short values are also better for
avoiding deadlock situations. Long wait values are useful for workloads
that include long-running statements, to avoid starting too many new
statements while the current ones execute.

Suppose a server executes a workload where 99.9% of the statements
complete within 100ms even when the server is loaded, and the remaining
statements take between 100ms and 2 hours fairly evenly spread. In this
case, it would make sense to set `thread_pool_stall_limit' to 10
(meaning 100ms). The default value of 60ms is okay for servers that
primarily execute very simple statements.

The `thread_pool_stall_limit' parameter can be changed at runtime to
enable you to strike a balance appropriate for the server work load.
Assuming that the `TP_THREAD_GROUP_STATS' table is enabled, you can use
the following query to determine the fraction of executed statements
that stalled:

     SELECT SUM(STALLED_QUERIES_EXECUTED) / SUM(QUERIES_EXECUTED)
     FROM information_schema.TP_THREAD_GROUP_STATS;

This number should be as low as possible. To decrease the likelihood of
statements stalling, increase the value of `thread_pool_stall_limit'.

When a statement arrives, what is the maximum time it can be delayed
before it actually starts executing? Suppose that the following
conditions apply:

   * There are 200 statements queued in the low-priority queue.

   * There are 10 statements queued in the high-priority queue.

   * `thread_pool_prio_kickup_timer' is set to 10000 (10 seconds).

   * `thread_pool_stall_limit' is set to 100 (1 second).

In the worst case, the 10 high-priority statements represent 10
transactions that continue executing for a long time. Thus, in the
worst case, no statements will be moved to the high-priority queue
because it will always already contain statements awaiting execution.
After 10 seconds, the new statement is eligible to be moved to the
high-priority queue.  However, before it can be moved, all the
statements before it must be moved as well. This could take another 2
seconds because a maximum of 100 statements per second are moved to the
high-priority queue. Now when the statement reaches the high-priority
queue, there could potentially be many long-running statements ahead of
it. In the worst case, every one of those will become stalled and it
will take 1 second for each statement before the next statement is
retrieved from the high-priority queue. Thus, in this scenario, it will
take 222 seconds before the new statement starts executing.

This example shows a worst case for an application. How to handle it
depends on the application. If the application has high requirements
for the response time, it should most likely throttle users at a higher
level itself. Otherwise, it can use the thread pool configuration
parameters to set some kind of a maximum waiting time.


File: manual.info,  Node: optimize-benchmarking,  Prev: optimizing-the-server,  Up: optimization

8.12 Measuring Performance (Benchmarking)
=========================================

* Menu:

* select-benchmarking::          Measuring the Speed of Expressions and Functions
* mysql-benchmarks::             The MySQL Benchmark Suite
* custom-benchmarks::            Using Your Own Benchmarks
* monitoring-performance-schema::  Measuring Performance with `performance_schema'
* thread-information::           Examining Thread Information

To measure performance, consider the following factors:

   * Whether you are measuring the speed of a single operation on a
     quiet system, or how a set of operations (a `workload') works over
     a period of time. With simple tests, you usually test how changing
     one aspect (a configuration setting, the set of indexes on a
     table, the SQL clauses in a query) affects performance. Benchmarks
     are typically long-running and elaborate performance tests, where
     the results could dictate high-level choices such as hardware and
     storage configuration, or how soon to upgrade to a new MySQL
     version.

   * For benchmarking, sometimes you must simulate a heavy database
     workload to get an accurate picture.

   * Performance can vary depending on so many different factors that a
     difference of a few percentage points might not be a decisive
     victory. The results might shift the opposite way when you test in
     a different environment.

   * Certain MySQL features help or do not help performance depending
     on the workload. For completeness, always test performance with
     those features turned on and turned off. The two most important
     features to try with each workload are the *Note MySQL query
     cache: query-cache, and the *Note adaptive hash index:
     innodb-performance-adaptive_hash_index. for `InnoDB' tables.

This section progresses from simple and direct measurement techniques
that a single developer can do, to more complicated ones that require
additional expertise to perform and interpret the results.


File: manual.info,  Node: select-benchmarking,  Next: mysql-benchmarks,  Prev: optimize-benchmarking,  Up: optimize-benchmarking

8.12.1 Measuring the Speed of Expressions and Functions
-------------------------------------------------------

To measure the speed of a specific MySQL expression or function, invoke
the `BENCHMARK()' function using the *Note `mysql': mysql. client
program. Its syntax is `BENCHMARK(LOOP_COUNT,EXPRESSION)'.  The return
value is always zero, but *Note `mysql': mysql.  prints a line
displaying approximately how long the statement took to execute. For
example:

     mysql> SELECT BENCHMARK(1000000,1+1);
     +------------------------+
     | BENCHMARK(1000000,1+1) |
     +------------------------+
     |                      0 |
     +------------------------+
     1 row in set (0.32 sec)

This result was obtained on a Pentium II 400MHz system. It shows that
MySQL can execute 1,000,000 simple addition expressions in 0.32 seconds
on that system.

The built-in MySQL functions are typically highly optimized, but there
may be some exceptions.  `BENCHMARK()' is an excellent tool for finding
out if some function is a problem for your queries.


File: manual.info,  Node: mysql-benchmarks,  Next: custom-benchmarks,  Prev: select-benchmarking,  Up: optimize-benchmarking

8.12.2 The MySQL Benchmark Suite
--------------------------------

This benchmark suite is meant to tell any user what operations a given
SQL implementation performs well or poorly. You can get a good idea for
how the benchmarks work by looking at the code and results in the
`sql-bench' directory in any MySQL source distribution.

Note that this benchmark is single-threaded, so it measures the minimum
time for the operations performed. We plan to add multi-threaded tests
to the benchmark suite in the future.

To use the benchmark suite, the following requirements must be
satisfied:

   * The benchmark suite is provided with MySQL source distributions.
     You can either download a released distribution from
     `http://dev.mysql.com/downloads/', or use the current development
     source tree. (See *Note installing-development-tree::.)

   * The benchmark scripts are written in Perl and use the Perl DBI
     module to access database servers, so DBI must be installed. You
     also need the server-specific DBD drivers for each of the servers
     you want to test. For example, to test MySQL, PostgreSQL, and DB2,
     you must have the `DBD::mysql', `DBD::Pg', and `DBD::DB2' modules
     installed. See *Note perl-support::.

After you obtain a MySQL source distribution, you can find the
benchmark suite located in its `sql-bench' directory. To run the
benchmark tests, build MySQL, and then change location into the
`sql-bench' directory and execute the `run-all-tests' script:

     shell> cd sql-bench
     shell> perl run-all-tests --server=SERVER_NAME

SERVER_NAME should be the name of one of the supported servers. To get
a list of all options and supported servers, invoke this command:

     shell> perl run-all-tests --help

The `crash-me' script also is located in the `sql-bench' directory.
`crash-me' tries to determine what features a database system supports
and what its capabilities and limitations are by actually running
queries. For example, it determines:

   * What data types are supported.

   * How many indexes are supported.

   * What functions are supported.

   * How big a query can be.

   * How big a *Note `VARCHAR': char. column can be.

For more information about benchmark results, visit
http://www.mysql.com/why-mysql/benchmarks/.


File: manual.info,  Node: custom-benchmarks,  Next: monitoring-performance-schema,  Prev: mysql-benchmarks,  Up: optimize-benchmarking

8.12.3 Using Your Own Benchmarks
--------------------------------

Benchmark your application and database to find out where the
bottlenecks are. After fixing one bottleneck (or by replacing it with a
`dummy' module), you can proceed to identify the next bottleneck. Even
if the overall performance for your application currently is
acceptable, you should at least make a plan for each bottleneck and
decide how to solve it if someday you really need the extra performance.

For examples of portable benchmark programs, look at those in the MySQL
benchmark suite. See *Note mysql-benchmarks::. You can take any program
from this suite and modify it for your own needs. By doing this, you
can try different solutions to your problem and test which really is
fastest for you.

Another free benchmark suite is the Open Source Database Benchmark,
available at `http://osdb.sourceforge.net/'.

It is very common for a problem to occur only when the system is very
heavily loaded, even if other aspects of the system were tested
extensively. These performance problems are typically due to issues of
basic database design (for example, table scans are not good under high
load) or problems with the operating system or libraries. These
problems are much easier to fix if isolated during pre-production
testing.

To avoid problems like this, benchmark your whole application under the
worst possible load:

   * The *Note `mysqlslap': mysqlslap. program can be helpful for
     simulating a high load produced by multiple clients issuing
     queries simultaneously. See *Note mysqlslap::.

   * You can also try benchmarking packages such as SysBench and DBT2,
     available at `http://sourceforge.net/projects/sysbench/', and
     `http://osdldbt.sourceforge.net/#dbt2'.

These programs or packages can bring a system to its knees, so be sure
to use them only on your development systems.


File: manual.info,  Node: monitoring-performance-schema,  Next: thread-information,  Prev: custom-benchmarks,  Up: optimize-benchmarking

8.12.4 Measuring Performance with `performance_schema'
------------------------------------------------------

You can query the tables in the `performance_schema' database to see
real-time information about the performance characteristics of your
server and the applications it is running. See *Note
performance-schema:: for details.


File: manual.info,  Node: thread-information,  Prev: monitoring-performance-schema,  Up: optimize-benchmarking

8.12.5 Examining Thread Information
-----------------------------------

* Menu:

* thread-commands::              Thread Command Values
* general-thread-states::        General Thread States
* delayed-insert-thread-states::  Delayed-Insert Thread States
* query-cache-thread-states::    Query Cache Thread States
* master-thread-states::         Replication Master Thread States
* slave-io-thread-states::       Replication Slave I/O Thread States
* slave-sql-thread-states::      Replication Slave SQL Thread States
* slave-connection-thread-states::  Replication Slave Connection Thread States
* mysql-cluster-thread-states::  MySQL Cluster Thread States
* event-scheduler-thread-states::  Event Scheduler Thread States

As you monitor the performance of your MySQL server, examine the
process list, which is the set of threads currently executing within
the server. Process list information is available from these sources:

   * The `SHOW [FULL] PROCESSLIST' statement: *Note show-processlist::

   * The *Note `SHOW PROFILE': show-profile. statement: *Note
     show-profiles::

   * The `INFORMATION_SCHEMA' *Note `PROCESSLIST': processlist-table.
     table: *Note processlist-table::

   * The *Note `mysqladmin processlist': mysqladmin. command: *Note
     mysqladmin::

You can always view information about your own threads. To view
information about threads being executed for other accounts, you must
have the `PROCESS' privilege.

Each process list entry contains several pieces of information:

   * `Id' is the connection identifier for the client associated with
     the thread.

   * `User' and `Host' indicate the account associated with the thread.

   * `db' is the default database for the thread, or `NULL' if none is
     selected.

   * `Command' and `State' indicate what the thread is doing.

     Most states correspond to very quick operations. If a thread stays
     in a given state for many seconds, there might be a problem that
     needs to be investigated.

   * `Time' indicates how long the thread has been in its current
     state. The thread's notion of the current time may be altered in
     some cases: The thread can change the time with *Note `SET
     TIMESTAMP = VALUE': set-statement. For a thread running on a slave
     that is processing events from the master, the thread time is set
     to the time found in the events and thus reflects current time on
     the master and not the slave.

   * `Info' contains the text of the statement being executed by the
     thread, or `NULL' if it is not executing one. By default, this
     value contains only the first 100 characters of the statement. To
     see the complete statements, use *Note `SHOW FULL PROCESSLIST':
     show-processlist.

The following sections list the possible `Command' values, and `State'
values grouped by category. The meaning for some of these values is
self-evident. For others, additional description is provided.


File: manual.info,  Node: thread-commands,  Next: general-thread-states,  Prev: thread-information,  Up: thread-information

8.12.5.1 Thread Command Values
..............................

A thread can have any of the following `Command' values:

   * `Binlog Dump'

     This is a thread on a master server for sending binary log
     contents to a slave server.

   * `Change user'

     The thread is executing a change-user operation.

   * `Close stmt'

     The thread is closing a prepared statement.

   * `Connect'

     A replication slave is connected to its master.

   * `Connect Out'

     A replication slave is connecting to its master.

   * `Create DB'

     The thread is executing a create-database operation.

   * `Daemon'

     This thread is internal to the server, not a thread that services
     a client connection.

   * `Debug'

     The thread is generating debugging information.

   * `Delayed insert'

     The thread is a delayed-insert handler.

   * `Drop DB'

     The thread is executing a drop-database operation.

   * `Error'

   * `Execute'

     The thread is executing a prepared statement.

   * `Fetch'

     The thread is fetching the results from executing a prepared
     statement.

   * `Field List'

     The thread is retrieving information for table columns.

   * `Init DB'

     The thread is selecting a default database.

   * `Kill'

     The thread is killing another thread.

   * `Long Data'

     The thread is retrieving long data in the result of executing a
     prepared statement.

   * `Ping'

     The thread is handling a server-ping request.

   * `Prepare'

     The thread is preparing a prepared statement.

   * `Processlist'

     The thread is producing information about server threads.

   * `Query'

     The thread is executing a statement.

   * `Quit'

     The thread is terminating.

   * `Refresh'

     The thread is flushing table, logs, or caches, or resetting status
     variable or replication server information.

   * `Register Slave'

     The thread is registering a slave server.

   * `Reset stmt'

     The thread is resetting a prepared statement.

   * `Set option'

     The thread is setting or resetting a client statement-execution
     option.

   * `Shutdown'

     The thread is shutting down the server.

   * `Sleep'

     The thread is waiting for the client to send a new statement to it.

   * `Statistics'

     The thread is producing server-status information.

   * `Table Dump'

     The thread is sending table contents to a slave server.

   * `Time'

     Unused.


File: manual.info,  Node: general-thread-states,  Next: delayed-insert-thread-states,  Prev: thread-commands,  Up: thread-information

8.12.5.2 General Thread States
..............................

The following list describes thread `State' values that are associated
with general query processing and not more specialized activities such
as replication. Many of these are useful only for finding bugs in the
server.

   * `After create'

     This occurs when the thread creates a table (including internal
     temporary tables), at the end of the function that creates the
     table. This state is used even if the table could not be created
     due to some error.

   * `Analyzing'

     The thread is calculating a `MyISAM' table key distributions (for
     example, for *Note `ANALYZE TABLE': analyze-table.).

   * `checking permissions'

     The thread is checking whether the server has the required
     privileges to execute the statement.

   * `Checking table'

     The thread is performing a table check operation.

   * `cleaning up'

     The thread has processed one command and is preparing to free
     memory and reset certain state variables.

   * `closing tables'

     The thread is flushing the changed table data to disk and closing
     the used tables. This should be a fast operation.  If not, verify
     that you do not have a full disk and that the disk is not in very
     heavy use.

   * `converting HEAP to MyISAM'

     The thread is converting an internal temporary table from a
     `MEMORY' table to an on-disk `MyISAM' table.

   * `copy to tmp table'

     The thread is processing an *Note `ALTER TABLE': alter-table.
     statement. This state occurs after the table with the new
     structure has been created but before rows are copied into it.

   * `Copying to group table'

     If a statement has different `ORDER BY' and `GROUP BY' criteria,
     the rows are sorted by group and copied to a temporary table.

   * `Copying to tmp table'

     The server is copying to a temporary table in memory.

   * `Copying to tmp table on disk'

     The server is copying to a temporary table on disk. The temporary
     result set has become too large (see *Note
     internal-temporary-tables::).  Consequently, the thread is
     changing the temporary table from in-memory to disk-based format
     to save memory.

   * `Creating index'

     The thread is processing `ALTER TABLE ... ENABLE KEYS' for a
     `MyISAM' table.

   * `Creating sort index'

     The thread is processing a *Note `SELECT': select. that is resolved
     using an internal temporary table.

   * `creating table'

     The thread is creating a table. This includes creation of
     temporary tables.

   * `Creating tmp table'

     The thread is creating a temporary table in memory or on disk. If
     the table is created in memory but later is converted to an
     on-disk table, the state during that operation will be `Copying to
     tmp table on disk'.

   * `deleting from main table'

     The server is executing the first part of a multiple-table delete.
     It is deleting only from the first table, and saving columns and
     offsets to be used for deleting from the other (reference) tables.

   * `deleting from reference tables'

     The server is executing the second part of a multiple-table delete
     and deleting the matched rows from the other tables.

   * `discard_or_import_tablespace'

     The thread is processing an `ALTER TABLE ...  DISCARD TABLESPACE'
     or `ALTER TABLE ...  IMPORT TABLESPACE' statement.

   * `end'

     This occurs at the end but before the cleanup of *Note `ALTER
     TABLE': alter-table, *Note `CREATE VIEW': create-view, *Note
     `DELETE': delete, *Note `INSERT': insert, *Note `SELECT': select,
     or *Note `UPDATE': update. statements.

   * `executing'

     The thread has begun executing a statement.

   * `Execution of init_command'

     The thread is executing statements in the value of the
     `init_command' system variable.

   * `freeing items'

     The thread has executed a command. Some freeing of items done
     during this state involves the query cache. This state is usually
     followed by `cleaning up'.

   * `Flushing tables'

     The thread is executing *Note `FLUSH TABLES': flush. and is
     waiting for all threads to close their tables.

   * `FULLTEXT initialization'

     The server is preparing to perform a natural-language full-text
     search.

   * `init'

     This occurs before the initialization of *Note `ALTER TABLE':
     alter-table, *Note `DELETE': delete, *Note `INSERT': insert, *Note
     `SELECT': select, or *Note `UPDATE': update. statements. Actions
     taken by the server in this state include flushing the binary log,
     the `InnoDB' log, and some query cache cleanup operations.

     For the `end' state, the following operations could be happening:

        * Removing query cache entries after data in a table is changed

        * Writing an event to the binary log

        * Freeing memory buffers, including for blobs

   * `Killed'

     Someone has sent a *Note `KILL': kill.  statement to the thread
     and it should abort next time it checks the kill flag. The flag is
     checked in each major loop in MySQL, but in some cases it might
     still take a short time for the thread to die. If the thread is
     locked by some other thread, the kill takes effect as soon as the
     other thread releases its lock.

   * `Locked'

     The query is locked by another query.

     As of MySQL 5.5.3, this state was removed because it was
     equivalent to the `Table lock' state and no longer appears in
     *Note `SHOW PROCESSLIST': show-processlist. output.

   * `logging slow query'

     The thread is writing a statement to the slow-query log.

   * `NULL'

     This state is used for the *Note `SHOW PROCESSLIST':
     show-processlist. state.

   * `login'

     The initial state for a connection thread until the client has
     been authenticated successfully.

   * `manage keys'

     The server is enabling or disabling a table index.

   * `Opening tables', `Opening table'

     The thread is trying to open a table. This is should be very fast
     procedure, unless something prevents opening.  For example, an
     *Note `ALTER TABLE': alter-table.  or a *Note `LOCK TABLE':
     lock-tables. statement can prevent opening a table until the
     statement is finished. It is also worth checking that your
     `table_open_cache' value is large enough.

   * `optimizing'

     The server is performing initial optimizations for a query.

   * `preparing'

     This state occurs during query optimization.

   * `Purging old relay logs'

     The thread is removing unneeded relay log files.

   * `query end'

     This state occurs after processing a query but before the `freeing
     items' state.

   * `Reading from net'

     The server is reading a packet from the network.

   * `Removing duplicates'

     The query was using *Note `SELECT DISTINCT': select. in such a way
     that MySQL could not optimize away the distinct operation at an
     early stage.  Because of this, MySQL requires an extra stage to
     remove all duplicated rows before sending the result to the client.

   * `removing tmp table'

     The thread is removing an internal temporary table after
     processing a *Note `SELECT': select.  statement. This state is not
     used if no temporary table was created.

   * `rename'

     The thread is renaming a table.

   * `rename result table'

     The thread is processing an *Note `ALTER TABLE': alter-table.
     statement, has created the new table, and is renaming it to
     replace the original table.

   * `Reopen tables'

     The thread got a lock for the table, but noticed after getting the
     lock that the underlying table structure changed. It has freed the
     lock, closed the table, and is trying to reopen it.

   * `Repair by sorting'

     The repair code is using a sort to create indexes.

   * `Repair done'

     The thread has completed a multi-threaded repair for a `MyISAM'
     table.

   * `Repair with keycache'

     The repair code is using creating keys one by one through the key
     cache. This is much slower than `Repair by sorting'.

   * `Rolling back'

     The thread is rolling back a transaction.

   * `Saving state'

     For `MyISAM' table operations such as repair or analysis, the
     thread is saving the new table state to the `.MYI' file header.
     State includes information such as number of rows, the
     `AUTO_INCREMENT' counter, and key distributions.

   * `Searching rows for update'

     The thread is doing a first phase to find all matching rows before
     updating them. This has to be done if the *Note `UPDATE': update.
     is changing the index that is used to find the involved rows.

   * `Sending data'

     The thread is reading and processing rows for a *Note `SELECT':
     select. statement, and sending data to the client. Because
     operations occurring during this this state tend to perform large
     amounts of disk access (reads), it is often the longest-running
     state over the lifetime of a given query.

   * `setup'

     The thread is beginning an *Note `ALTER TABLE': alter-table.
     operation.

   * `Sorting for group'

     The thread is doing a sort to satisfy a `GROUP BY'.

   * `Sorting for order'

     The thread is doing a sort to satisfy a `ORDER BY'.

   * `Sorting index'

     The thread is sorting index pages for more efficient access during
     a `MyISAM' table optimization operation.

   * `Sorting result'

     For a *Note `SELECT': select. statement, this is similar to
     `Creating sort index', but for nontemporary tables.

   * `statistics'

     The server is calculating statistics to develop a query execution
     plan. If a thread is in this state for a long time, the server is
     probably disk-bound performing other work.

   * `System lock'

     The thread is going to request or is waiting for an internal or
     external system lock for the table. If this state is being caused
     by requests for external locks and you are not using multiple
     *Note `mysqld': mysqld.  servers that are accessing the same *Note
     `MyISAM': myisam-storage-engine. tables, you can disable external
     system locks with the `--skip-external-locking' option. However,
     external locking is disabled by default, so it is likely that this
     option will have no effect. For *Note `SHOW PROFILE':
     show-profile, this state means the thread is requesting the lock
     (not waiting for it).

   * `Table lock'

     The next thread state after `System lock'. The thread has acquired
     an external lock and is going to request an internal table lock.

     This state was replaced in MySQL 5.5.6 with `Waiting for table
     level lock'.

   * `update'

     The thread is getting ready to start updating the table.

   * `Updating'

     The thread is searching for rows to update and is updating them.

   * `updating main table'

     The server is executing the first part of a multiple-table update.
     It is updating only the first table, and saving columns and
     offsets to be used for updating the other (reference) tables.

   * `updating reference tables'

     The server is executing the second part of a multiple-table update
     and updating the matched rows from the other tables.

   * `User lock'

     The thread is going to request or is waiting for an advisory lock
     requested with a `GET_LOCK()' call. For *Note `SHOW PROFILE':
     show-profile, this state means the thread is requesting the lock
     (not waiting for it).

   * `User sleep'

     The thread has invoked a `SLEEP()' call.

   * `Waiting for all running commits to finish'

     A statement that causes an explicit or implicit commit is waiting
     for release of a read lock. This state was removed in MySQL 5.5.8;
     `Waiting for commit lock' is used instead.

   * `Waiting for commit lock'

     A statement that causes an explicit or implicit commit is waiting
     for release of a read lock or *Note `FLUSH TABLES WITH READ LOCK':
     flush.) is waiting for a commit lock. This state was added in
     MySQL 5.5.8.

   * `Waiting for global read lock'

     *Note `FLUSH TABLES WITH READ LOCK': flush.) is waiting for a
     global read lock.

   * `Waiting for release of readlock'

     The thread is waiting for a global read lock obtained by another
     thread (with *Note `FLUSH TABLES WITH READ LOCK': flush.) to be
     released. This state was removed in MySQL 5.5.8; `Waiting for
     global read lock' or `Waiting for commit lock' are used instead.

   * `Waiting for tables', `Waiting for table', `Waiting for table
     flush'

     The thread got a notification that the underlying structure for a
     table has changed and it needs to reopen the table to get the new
     structure. However, to reopen the table, it must wait until all
     other threads have closed the table in question.

     This notification takes place if another thread has used *Note
     `FLUSH TABLES': flush. or one of the following statements on the
     table in question: `FLUSH TABLES TBL_NAME', *Note `ALTER TABLE':
     alter-table, *Note `RENAME TABLE': rename-table, *Note `REPAIR
     TABLE': repair-table, *Note `ANALYZE TABLE': analyze-table, or
     *Note `OPTIMIZE TABLE': optimize-table.

     In MySQL 5.5.6, `Waiting for table' was replaced with `Waiting for
     table flush'.

   * `Waiting for LOCK_TYPE lock'

     The server is waiting to acquire a lock, where LOCK_TYPE indicates
     the type of lock:

        * `Waiting for event metadata lock' (added in MySQL 5.5.8)

        * `Waiting for global metadata lock' (replaced by `Waiting for
          global read lock' in MySQL 5.5.8)

        * `Waiting for global read lock' (added in MySQL 5.5.8)

        * `Waiting for schema metadata lock'

        * `Waiting for stored function metadata lock'

        * `Waiting for stored procedure metadata lock'

        * `Waiting for table level lock'

        * `Waiting for table metadata lock'

        * `Waiting for trigger metadata lock' (added in MySQL 5.5.8)

   * `Waiting on cond'

     A generic state in which the thread is waiting for a condition to
     become true. No specific state information is available.

   * `Waiting to get readlock'

     The thread has issued a *Note `FLUSH TABLES WITH READ LOCK':
     flush. statement to obtain a global read lock and is waiting to
     obtain the lock. This state was removed in MySQL 5.5.8; `Waiting
     for global read lock' is used instead.

   * `Writing to net'

     The server is writing a packet to the network.


File: manual.info,  Node: delayed-insert-thread-states,  Next: query-cache-thread-states,  Prev: general-thread-states,  Up: thread-information

8.12.5.3 Delayed-Insert Thread States
.....................................

These thread states are associated with processing for `DELAYED'
inserts (see *Note insert-delayed::). Some states are associated with
connection threads that process *Note `INSERT DELAYED': insert-delayed.
statements from clients. Other states are associated with delayed-insert
handler threads that insert the rows. There is a delayed-insert handler
thread for each table for which *Note `INSERT DELAYED': insert-delayed.
statements are issued.

States associated with a connection thread that processes an *Note
`INSERT DELAYED': insert-delayed. statement from the client:

   * `allocating local table'

     The thread is preparing to feed rows to the delayed-insert handler
     thread.

   * `Creating delayed handler'

     The thread is creating a handler for `DELAYED' inserts.

   * `got handler lock'

     This occurs before the `allocating local table' state and after
     the `waiting for handler lock' state, when the connection thread
     gets access to the delayed-insert handler thread.

   * `got old table'

     This occurs after the `waiting for handler open' state. The
     delayed-insert handler thread has signaled that it has ended its
     initialization phase, which includes opening the table for delayed
     inserts.

   * `storing row into queue'

     The thread is adding a new row to the list of rows that the
     delayed-insert handler thread must insert.

   * `waiting for delay_list'

     This occurs during the initialization phase when the thread is
     trying to find the delayed-insert handler thread for the table,
     and before attempting to gain access to the list of delayed-insert
     threads.

   * `waiting for handler insert'

     An *Note `INSERT DELAYED': insert-delayed. handler has processed
     all pending inserts and is waiting for new ones.

   * `waiting for handler lock'

     This occurs before the `allocating local table' state when the
     connection thread waits for access to the delayed-insert handler
     thread.

   * `waiting for handler open'

     This occurs after the `Creating delayed handler' state and before
     the `got old table' state. The delayed-insert handler thread has
     just been started, and the connection thread is waiting for it to
     initialize.

States associated with a delayed-insert handler thread that inserts the
rows:

   * `insert'

     The state that occurs just before inserting rows into the table.

   * `reschedule'

     After inserting a number of rows, the delayed-insert thread sleeps
     to let other threads do work.

   * `upgrading lock'

     A delayed-insert handler is trying to get a lock for the table to
     insert rows.

   * `Waiting for INSERT'

     A delayed-insert handler is waiting for a connection thread to add
     rows to the queue (see `storing row into queue').


File: manual.info,  Node: query-cache-thread-states,  Next: master-thread-states,  Prev: delayed-insert-thread-states,  Up: thread-information

8.12.5.4 Query Cache Thread States
..................................

These thread states are associated with the query cache (see *Note
query-cache::).

   * `checking privileges on cached query'

     The server is checking whether the user has privileges to access a
     cached query result.

   * `checking query cache for query'

     The server is checking whether the current query is present in the
     query cache.

   * `invalidating query cache entries'

     Query cache entries are being marked invalid because the
     underlying tables have changed.

   * `sending cached result to client'

     The server is taking the result of a query from the query cache
     and sending it to the client.

   * `storing result in query cache'

     The server is storing the result of a query in the query cache.

   * `Waiting for query cache lock'

     This state occurs while a session is waiting to take the query
     cache lock. This can happen for any statement that needs to
     perform some query cache operation, such as an *Note `INSERT':
     insert. or *Note `DELETE': delete. that invalidates the query
     cache, a *Note `SELECT': select. that looks for a cached entry,
     *Note `RESET QUERY CACHE': reset, and so forth.


File: manual.info,  Node: master-thread-states,  Next: slave-io-thread-states,  Prev: query-cache-thread-states,  Up: thread-information

8.12.5.5 Replication Master Thread States
.........................................

The following list shows the most common states you may see in the
`State' column for the master's `Binlog Dump' thread. If you see no
`Binlog Dump' threads on a master server, this means that replication
is not running--that is, that no slaves are currently connected.

   * `Sending binlog event to slave'

     Binary logs consist of _events_, where an event is usually an
     update plus some other information.  The thread has read an event
     from the binary log and is now sending it to the slave.

   * `Finished reading one binlog; switching to next binlog'

     The thread has finished reading a binary log file and is opening
     the next one to send to the slave.

   * `Master has sent all binlog to slave; waiting for binlog to be
     updated'

     The thread has read all outstanding updates from the binary logs
     and sent them to the slave. The thread is now idle, waiting for
     new events to appear in the binary log resulting from new updates
     occurring on the master.

   * `Waiting to finalize termination'

     A very brief state that occurs as the thread is stopping.


File: manual.info,  Node: slave-io-thread-states,  Next: slave-sql-thread-states,  Prev: master-thread-states,  Up: thread-information

8.12.5.6 Replication Slave I/O Thread States
............................................

The following list shows the most common states you see in the `State'
column for a slave server I/O thread.  This state also appears in the
`Slave_IO_State' column displayed by *Note `SHOW SLAVE STATUS':
show-slave-status, so you can get a good view of what is happening by
using that statement.

   * `Waiting for master update'

     The initial state before `Connecting to master'.

   * `Connecting to master'

     The thread is attempting to connect to the master.

   * `Checking master version'

     A state that occurs very briefly, after the connection to the
     master is established.

   * `Registering slave on master'

     A state that occurs very briefly after the connection to the
     master is established.

   * `Requesting binlog dump'

     A state that occurs very briefly, after the connection to the
     master is established. The thread sends to the master a request
     for the contents of its binary logs, starting from the requested
     binary log file name and position.

   * `Waiting to reconnect after a failed binlog dump request'

     If the binary log dump request failed (due to disconnection), the
     thread goes into this state while it sleeps, then tries to
     reconnect periodically. The interval between retries can be
     specified using the *Note `CHANGE MASTER TO': change-master-to.
     statement.

   * `Reconnecting after a failed binlog dump request'

     The thread is trying to reconnect to the master.

   * `Waiting for master to send event'

     The thread has connected to the master and is waiting for binary
     log events to arrive. This can last for a long time if the master
     is idle. If the wait lasts for `slave_net_timeout' seconds, a
     timeout occurs. At that point, the thread considers the connection
     to be broken and makes an attempt to reconnect.

   * `Queueing master event to the relay log'

     The thread has read an event and is copying it to the relay log so
     that the SQL thread can process it.

   * `Waiting to reconnect after a failed master event read'

     An error occurred while reading (due to disconnection).  The
     thread is sleeping for the number of seconds set by the *Note
     `CHANGE MASTER TO': change-master-to.  statement (default 60)
     before attempting to reconnect.

   * `Reconnecting after a failed master event read'

     The thread is trying to reconnect to the master. When connection
     is established again, the state becomes `Waiting for master to
     send event'.

   * `Waiting for the slave SQL thread to free enough relay log space'

     You are using a nonzero `relay_log_space_limit' value, and the
     relay logs have grown large enough that their combined size
     exceeds this value. The I/O thread is waiting until the SQL thread
     frees enough space by processing relay log contents so that it can
     delete some relay log files.

   * `Waiting for slave mutex on exit'

     A state that occurs briefly as the thread is stopping.


File: manual.info,  Node: slave-sql-thread-states,  Next: slave-connection-thread-states,  Prev: slave-io-thread-states,  Up: thread-information

8.12.5.7 Replication Slave SQL Thread States
............................................

The following list shows the most common states you may see in the
`State' column for a slave server SQL thread:

   * `Waiting for the next event in relay log'

     The initial state before `Reading event from the relay log'.

   * `Reading event from the relay log'

     The thread has read an event from the relay log so that the event
     can be processed.

   * `Making temp file'

     The thread is executing a *Note `LOAD DATA INFILE': load-data.
     statement and is creating a temporary file containing the data
     from which the slave will read rows.

   * `Slave has read all relay log; waiting for the slave I/O thread to
     update it'

     The thread has processed all events in the relay log files, and is
     now waiting for the I/O thread to write new events to the relay
     log.

   * `Waiting for slave mutex on exit'

     A very brief state that occurs as the thread is stopping.

The `State' column for the I/O thread may also show the text of a
statement. This indicates that the thread has read an event from the
relay log, extracted the statement from it, and is executing it.


File: manual.info,  Node: slave-connection-thread-states,  Next: mysql-cluster-thread-states,  Prev: slave-sql-thread-states,  Up: thread-information

8.12.5.8 Replication Slave Connection Thread States
...................................................

These thread states occur on a replication slave but are associated
with connection threads, not with the I/O or SQL threads.

   * `Changing master'

     The thread is processing a *Note `CHANGE MASTER TO':
     change-master-to. statement.

   * `Killing slave'

     The thread is processing a `STOP SLAVE' statement.

   * `Opening master dump table'

     This state occurs after `Creating table from master dump'.

   * `Reading master dump table data'

     This state occurs after `Opening master dump table'.

   * `Rebuilding the index on master dump table'

     This state occurs after `Reading master dump table data'.


File: manual.info,  Node: mysql-cluster-thread-states,  Next: event-scheduler-thread-states,  Prev: slave-connection-thread-states,  Up: thread-information

8.12.5.9 MySQL Cluster Thread States
....................................

   * `Committing events to binlog'

   * `Opening mysql.ndb_apply_status'

   * `Processing events'

     The thread is processing events for binary logging.

   * `Processing events from schema table'

     The thread is doing the work of schema replication.

   * `Shutting down'

   * `Syncing ndb table schema operation and binlog'

     This is used to have a correct binary log of schema operations for
     NDB.

   * `Waiting for event from ndbcluster'

     The server is acting as an SQL node in a MySQL Cluster, and is
     connected to a cluster management node.

   * `Waiting for first event from ndbcluster'

   * `Waiting for ndbcluster binlog update to reach current position'

   * `Waiting for ndbcluster to start'

   * `Waiting for schema epoch'

     The thread is waiting for a schema epoch (that is, a global
     checkpoint).


File: manual.info,  Node: event-scheduler-thread-states,  Prev: mysql-cluster-thread-states,  Up: thread-information

8.12.5.10 Event Scheduler Thread States
.......................................

These states occur for the Event Scheduler thread, threads that are
created to execute scheduled events, or threads that terminate the
scheduler.

   * `Clearing'

     The scheduler thread or a thread that was executing an event is
     terminating and is about to end.

   * `Initialized'

     The scheduler thread or a thread that will execute an event has
     been initialized.

   * `Waiting for next activation'

     The scheduler has a nonempty event queue but the next activation
     is in the future.

   * `Waiting for scheduler to stop'

     The thread issued `SET GLOBAL event_scheduler=OFF' and is waiting
     for the scheduler to stop.

   * `Waiting on empty queue'

     The scheduler's event queue is empty and it is sleeping.


File: manual.info,  Node: language-structure,  Next: globalization,  Prev: optimization,  Up: Top

9 Language Structure
********************

* Menu:

* literals::                     Literal Values
* identifiers::                  Schema Object Names
* reserved-words::               Reserved Words
* user-variables::               User-Defined Variables
* expressions::                  Expression Syntax
* comments::                     Comment Syntax

This chapter discusses the rules for writing the following elements of
SQL statements when using MySQL:

   * Literal values such as strings and numbers

   * Identifiers such as database, table, and column names

   * Reserved words

   * User-defined and system variables

   * Comments


File: manual.info,  Node: literals,  Next: identifiers,  Prev: language-structure,  Up: language-structure

9.1 Literal Values
==================

* Menu:

* string-literals::              String Literals
* number-literals::              Number Literals
* date-and-time-literals::       Date and Time Literals
* hexadecimal-literals::         Hexadecimal Literals
* boolean-literals::             Boolean Literals
* bit-field-literals::           Bit-Field Literals
* null-values::                  `NULL' Values

This section describes how to write literal values in MySQL. These
include strings, numbers, hexadecimal values, boolean values, and
`NULL'. The section also covers the various nuances and `gotchas' that
you may run into when dealing with these basic types in MySQL.


File: manual.info,  Node: string-literals,  Next: number-literals,  Prev: literals,  Up: literals

9.1.1 String Literals
---------------------

A string is a sequence of bytes or characters, enclosed within either
single quote (``''') or double quote (``"'') characters.  Examples:

     'a string'
     "another string"

Quoted strings placed next to each other are concatenated to a single
string. The following lines are equivalent:

     'a string'
     'a' ' ' 'string'

If the `ANSI_QUOTES' SQL mode is enabled, string literals can be quoted
only within single quotation marks because a string quoted within
double quotation marks is interpreted as an identifier.

A _binary string_ is a string of bytes that has no character set or
collation. A _nonbinary string_ is a string of characters that has a
character set and collation. For both types of strings, comparisons are
based on the numeric values of the string unit.  For binary strings,
the unit is the byte. For nonbinary strings the unit is the character
and some character sets support multi-byte characters. Character value
ordering is a function of the string collation.

String literals may have an optional character set introducer and
`COLLATE' clause:

     [_CHARSET_NAME]'STRING' [COLLATE COLLATION_NAME]

Examples:

     SELECT _latin1'STRING';
     SELECT _latin1'STRING' COLLATE latin1_danish_ci;

You can use `N'LITERAL'' (or `n'LITERAL'') to create a string in the
national character set. These statements are equivalent:

     SELECT N'some text';
     SELECT n'some text';
     SELECT _utf8'some text';

For more information about these forms of string syntax, see *Note
charset-literal::, and *Note charset-national::.

Within a string, certain sequences have special meaning unless the
`NO_BACKSLASH_ESCAPES' SQL mode is enabled. Each of these sequences
begins with a backslash (``\''), known as the _escape character_. MySQL
recognizes the escape sequences shown in *Note
character-escape-sequences::. For all other escape sequences, backslash
is ignored. That is, the escaped character is interpreted as if it was
not escaped. For example, ``\x'' is just ``x''. These sequences are case
sensitive. For example, ``\b'' is interpreted as a backspace, but
``\B'' is interpreted as ``B''. Escape processing is done according to
the character set indicated by the `character_set_connection' system
variable. This is true even for strings that are preceded by an
introducer that indicates a different character set, as discussed in
*Note charset-literal::.

*Special Character Escape Sequences*

Escape      Character Represented by Sequence
Sequence    
`\0'        An ASCII NUL (`0x00') character.
`\''        A single quote (``''') character.
`\"'        A double quote (``"'') character.
`\b'        A backspace character.
`\n'        A newline (linefeed) character.
`\r'        A carriage return character.
`\t'        A tab character.
`\Z'        ASCII 26 (Control+Z). See note following the table.
`\\'        A backslash (``\'') character.
`\%'        A ``%'' character. See note following the table.
`\_'        A ``_'' character. See note following the table.

The ASCII 26 character can be encoded as ``\Z'' to enable you to work
around the problem that ASCII 26 stands for END-OF-FILE on Windows.
ASCII 26 within a file causes problems if you try to use `mysql DB_NAME
< FILE_NAME'.

The ``\%'' and ``\_'' sequences are used to search for literal
instances of ``%'' and ``_'' in pattern-matching contexts where they
would otherwise be interpreted as wildcard characters. See the
description of the `LIKE' operator in *Note
string-comparison-functions::. If you use ``\%'' or ``\_'' outside of
pattern-matching contexts, they evaluate to the strings ``\%'' and
``\_'', not to ``%'' and ``_''.

There are several ways to include quote characters within a string:

   * A ``''' inside a string quoted with ``''' may be written as ``''''.

   * A ``"'' inside a string quoted with ``"'' may be written as ``""''.

   * Precede the quote character by an escape character (``\'').

   * A ``''' inside a string quoted with ``"'' needs no special
     treatment and need not be doubled or escaped. In the same way,
     ``"'' inside a string quoted with ``''' needs no special treatment.

The following *Note `SELECT': select. statements demonstrate how
quoting and escaping work:

     mysql> SELECT 'hello', '"hello"', '""hello""', 'hel''lo', '\'hello';
     +-------+---------+-----------+--------+--------+
     | hello | "hello" | ""hello"" | hel'lo | 'hello |
     +-------+---------+-----------+--------+--------+

     mysql> SELECT "hello", "'hello'", "''hello''", "hel""lo", "\"hello";
     +-------+---------+-----------+--------+--------+
     | hello | 'hello' | ''hello'' | hel"lo | "hello |
     +-------+---------+-----------+--------+--------+

     mysql> SELECT 'This\nIs\nFour\nLines';
     +--------------------+
     | This
     Is
     Four
     Lines |
     +--------------------+

     mysql> SELECT 'disappearing\ backslash';
     +------------------------+
     | disappearing backslash |
     +------------------------+

If you want to insert binary data into a string column (such as a *Note
`BLOB': blob. column), you should represent certain characters by
escape sequences. Backslash (``\'') and the quote character used to
quote the string must be escaped. In certain client environments, it
may also be necessary to escape `NUL' or Control+Z. The *Note `mysql':
mysql. client truncates quoted strings containing `NUL' characters if
they are not escaped, and Control+Z may be taken for END-OF-FILE on
Windows if not escaped. For the escape sequences that represent each of
these characters, see *Note character-escape-sequences::.

When writing application programs, any string that might contain any of
these special characters must be properly escaped before the string is
used as a data value in an SQL statement that is sent to the MySQL
server. You can do this in two ways:

   * Process the string with a function that escapes the special
     characters. In a C program, you can use the *Note
     `mysql_real_escape_string()': mysql-real-escape-string. C API
     function to escape characters. See *Note
     mysql-real-escape-string::. Within SQL statements that construct
     other SQL statements, you can use the `QUOTE()' function. The Perl
     DBI interface provides a `quote' method to convert special
     characters to the proper escape sequences. See *Note apis-perl::.
     Other language interfaces may provide a similar capability.

   * As an alternative to explicitly escaping special characters, many
     MySQL APIs provide a placeholder capability that enables you to
     insert special markers into a statement string, and then bind data
     values to them when you issue the statement. In this case, the API
     takes care of escaping special characters in the values for you.


File: manual.info,  Node: number-literals,  Next: date-and-time-literals,  Prev: string-literals,  Up: literals

9.1.2 Number Literals
---------------------

Integers are represented as a sequence of digits. Floats use ``.'' as a
decimal separator.  Either type of number may be preceded by ``-'' or
``+'' to indicate a negative or positive value, respectively

Examples of valid integers:

     1221
     0
     -32

Examples of valid floating-point numbers:

     294.42
     -32032.6809e+10
     148.00

An integer may be used in a floating-point context; it is interpreted
as the equivalent floating-point number.


File: manual.info,  Node: date-and-time-literals,  Next: hexadecimal-literals,  Prev: number-literals,  Up: literals

9.1.3 Date and Time Literals
----------------------------

Date and time values can be represented in several formats, such as
quoted strings or as numbers, depending on the exact type of the value
and other factors. For example, in contexts where MySQL expects a date,
it interprets any of `'2015-07-21'', `'20150721'', and `20150721' as a
date.

This section describes the acceptable formats for date and time
literals. For more information about the temporal data types, such as
the range of permitted values, consult these sections:

   * *Note date-and-time-type-overview::

   * *Note date-and-time-types::

Standard SQL and ODBC Date and Time Literals

Standard SQL permits temporal literals to be specified using a type
keyword and a string. The space between the keyword and string is
optional.

     DATE 'STR'
     TIME 'STR'
     TIMESTAMP 'STR'

MySQL recognizes those constructions and also the corresponding ODBC
syntax:

     { d 'STR' }
     { t 'STR' }
     { ts 'STR' }

However, MySQL ignores the type keyword and each of the preceding
constructions produces the string value `'STR'', with a type of *Note
`VARCHAR': char.

String and Numeric Literals in Date and Time Context

MySQL recognizes *Note `DATE': datetime. values in these formats:

   * As a string in either `'YYYY-MM-DD'' or `'YY-MM-DD'' format. A
     `relaxed' syntax is permitted: Any punctuation character may be
     used as the delimiter between date parts.  For example,
     `'2012-12-31'', `'2012/12/31'', `'2012^12^31'', and `'2012@12@31''
     are equivalent.

   * As a string with no delimiters in either `'YYYYMMDD'' or `'YYMMDD''
     format, provided that the string makes sense as a date. For
     example, `'20070523'' and `'070523'' are interpreted as
     `'2007-05-23'', but `'071332'' is illegal (it has nonsensical
     month and day parts) and becomes `'0000-00-00''.

   * As a number in either `YYYYMMDD' or `YYMMDD' format, provided that
     the number makes sense as a date. For example, `19830905' and
     `830905' are interpreted as `'1983-09-05''.

MySQL recognizes *Note `DATETIME': datetime. and *Note `TIMESTAMP':
datetime. values in these formats:

   * As a string in either `'YYYY-MM-DD HH:MM:SS'' or `'YY-MM-DD
     HH:MM:SS'' format. A `relaxed' syntax is permitted here, too: Any
     punctuation character may be used as the delimiter between date
     parts or time parts. For example, `'2012-12-31 11:30:45'',
     `'2012^12^31 11+30+45'', `'2012/12/31 11*30*45'', and `'2012@12@31
     11^30^45'' are equivalent.

     The date and time parts can be separated by `T' rather than a
     space. For example, `'2012-12-31 11:30:45''
     `'2012-12-31T11:30:45'' are equivalent.

   * As a string with no delimiters in either `'YYYYMMDDHHMMSS'' or
     `'YYMMDDHHMMSS'' format, provided that the string makes sense as a
     date. For example, `'20070523091528'' and `'070523091528'' are
     interpreted as `'2007-05-23 09:15:28'', but `'071122129015'' is
     illegal (it has a nonsensical minute part) and becomes `'0000-00-00
     00:00:00''.

   * As a number in either `YYYYMMDDHHMMSS' or `YYMMDDHHMMSS' format,
     provided that the number makes sense as a date. For example,
     `19830905132800' and `830905132800' are interpreted as
     `'1983-09-05 13:28:00''.

A *Note `DATETIME': datetime. or *Note `TIMESTAMP': datetime. value can
include a trailing fractional seconds part in up to microseconds (6
digits) precision. Although this fractional part is recognized, it is
discarded from values stored into *Note `DATETIME': datetime. or *Note
`TIMESTAMP': datetime. columns. For information about fractional
seconds support in MySQL, see *Note fractional-seconds::.

Dates containing two-digit year values are ambiguous because the
century is unknown. MySQL interprets two-digit year values using these
rules:

   * Year values in the range `70-99' are converted to `1970-1999'.

   * Year values in the range `00-69' are converted to `2000-2069'.

See also *Note two-digit-years::.

For values specified as strings that include date part delimiters, it
is unnecessary to specify two digits for month or day values that are
less than `10'.  `'2015-6-9'' is the same as `'2015-06-09''. Similarly,
for values specified as strings that include time part delimiters, it
is unnecessary to specify two digits for hour, minute, or second values
that are less than `10'. `'2015-10-30 1:2:3'' is the same as
`'2015-10-30 01:02:03''.

Values specified as numbers should be 6, 8, 12, or 14 digits long. If a
number is 8 or 14 digits long, it is assumed to be in `YYYYMMDD' or
`YYYYMMDDHHMMSS' format and that the year is given by the first 4
digits. If the number is 6 or 12 digits long, it is assumed to be in
`YYMMDD' or `YYMMDDHHMMSS' format and that the year is given by the
first 2 digits. Numbers that are not one of these lengths are
interpreted as though padded with leading zeros to the closest length.

Values specified as nondelimited strings are interpreted according
their length. For a string 8 or 14 characters long, the year is assumed
to be given by the first 4 characters.  Otherwise, the year is assumed
to be given by the first 2 characters. The string is interpreted from
left to right to find year, month, day, hour, minute, and second
values, for as many parts as are present in the string. This means you
should not use strings that have fewer than 6 characters. For example,
if you specify `'9903'', thinking that represents March, 1999, MySQL
converts it to the `zero' date value. This occurs because the year and
month values are `99' and `03', but the day part is completely missing.
However, you can explicitly specify a value of zero to represent
missing month or day parts. For example, to insert the value
`'1999-03-00'', use `'990300''.

MySQL recognizes *Note `TIME': time. values in these formats:

   * As a string in `'D HH:MM:SS'' format. You can also use one of the
     following `relaxed' syntaxes: `'HH:MM:SS'', `'HH:MM'', `'D HH:MM'',
     `'D HH'', or `'SS''. Here `D' represents days and can have a value
     from 0 to 34.

   * As a string with no delimiters in `'HHMMSS'' format, provided that
     it makes sense as a time. For example, `'101112'' is understood as
     `'10:11:12'', but `'109712'' is illegal (it has a nonsensical
     minute part) and becomes `'00:00:00''.

   * As a number in `HHMMSS' format, provided that it makes sense as a
     time. For example, `101112' is understood as `'10:11:12''. The
     following alternative formats are also understood: `SS', `MMSS',
     or `HHMMSS'.

A trailing fractional seconds part is recognized in the `'D
HH:MM:SS.fraction'', `'HH:MM:SS.fraction'', `'HHMMSS.fraction'', and
`HHMMSS.fraction' time formats, where `fraction' is the fractional part
in up to microseconds (6 digits) precision. Although this fractional
part is recognized, it is discarded from values stored into *Note
`TIME': time. columns. For information about fractional seconds support
in MySQL, see *Note fractional-seconds::.

For *Note `TIME': time. values specified as strings that include a time
part delimiter, it is unnecessary to specify two digits for hours,
minutes, or seconds values that are less than `10'. `'8:3:2'' is the
same as `'08:03:02''.


File: manual.info,  Node: hexadecimal-literals,  Next: boolean-literals,  Prev: date-and-time-literals,  Up: literals

9.1.4 Hexadecimal Literals
--------------------------

MySQL supports hexadecimal values, written using `X'VAL'', `x'VAL'', or
`0xVAL' format, where VAL contains hexadecimal digits (`0..9', `A..F').
Lettercase of the digits does not matter. For values written using
`X'VAL'' or `x'VAL'' format, VAL must contain an even number of digits.
For values written using `0xVAL syntax', values that contain an odd
number of digits are treated as having an extra leading `0'. For
example, `0x0a' and `0xaaa' are interpreted as `0x0a' and `0x0aaa'.

In numeric contexts, hexadecimal values act like integers (64-bit
precision). In string contexts, they act like binary strings, where
each pair of hex digits is converted to a character:

     mysql> SELECT X'4D7953514C';
             -> 'MySQL'
     mysql> SELECT 0x0a+0;
             -> 10
     mysql> SELECT 0x5061756c;
             -> 'Paul'

The default type of a hexadecimal value is a string. If you want to
ensure that the value is treated as a number, you can use `CAST(... AS
UNSIGNED)':

     mysql> SELECT 0x41, CAST(0x41 AS UNSIGNED);
             -> 'A', 65

The `X'HEXSTRING'' syntax is based on standard SQL. The `0x' syntax is
based on ODBC. Hexadecimal strings are often used by ODBC to supply
values for *Note `BLOB': blob.  columns.

You can convert a string or a number to a string in hexadecimal format
with the `HEX()' function:

     mysql> SELECT HEX('cat');
             -> '636174'
     mysql> SELECT 0x636174;
             -> 'cat'


File: manual.info,  Node: boolean-literals,  Next: bit-field-literals,  Prev: hexadecimal-literals,  Up: literals

9.1.5 Boolean Literals
----------------------

The constants `TRUE' and `FALSE' evaluate to `1' and `0', respectively.
The constant names can be written in any lettercase.

     mysql> SELECT TRUE, true, FALSE, false;
             -> 1, 1, 0, 0


File: manual.info,  Node: bit-field-literals,  Next: null-values,  Prev: boolean-literals,  Up: literals

9.1.6 Bit-Field Literals
------------------------

Bit-field values can be written using `b'VALUE'' or `0bVALUE' notation.
VALUE is a binary value written using zeros and ones.

Bit-field notation is convenient for specifying values to be assigned
to *Note `BIT': bit-type. columns:


     mysql> CREATE TABLE t (b BIT(8));
     mysql> INSERT INTO t SET b = b'11111111';
     mysql> INSERT INTO t SET b = b'1010';
     mysql> INSERT INTO t SET b = b'0101';

Bit values are returned as binary values. To display them in printable
form, add 0 or use a conversion function such as `BIN()'. High-order 0
bits are not displayed in the converted value.

     mysql> SELECT b+0, BIN(b+0), OCT(b+0), HEX(b+0) FROM t;
     +------+----------+----------+----------+
     | b+0  | BIN(b+0) | OCT(b+0) | HEX(b+0) |
     +------+----------+----------+----------+
     |  255 | 11111111 | 377      | FF       |
     |   10 | 1010     | 12       | A        |
     |    5 | 101      | 5        | 5        |
     +------+----------+----------+----------+

Bit values assigned to user variables are treated as binary strings. To
assign a bit value as a number to a user variable, use `CAST()' or `+0':

     mysql> SET @v1 = 0b1000001;
     mysql> SET @v2 = CAST(0b1000001 AS UNSIGNED), @v3 = 0b1000001+0;
     mysql> SELECT @v1, @v2, @v3;
     +------+------+------+
     | @v1  | @v2  | @v3  |
     +------+------+------+
     | A    |   65 |   65 |
     +------+------+------+


File: manual.info,  Node: null-values,  Prev: bit-field-literals,  Up: literals

9.1.7 `NULL' Values
-------------------

The `NULL' value means `no data.' `NULL' can be written in any
lettercase. A synonym is `\N' (case sensitive).

For text file import or export operations performed with *Note `LOAD
DATA INFILE': load-data. or *Note `SELECT ... INTO OUTFILE':
select-into, `NULL' is represented by the `\N' sequence. See *Note
load-data::.

Be aware that the `NULL' value is different from values such as `0' for
numeric types or the empty string for string types. For more
information, see *Note problems-with-null::.


File: manual.info,  Node: identifiers,  Next: reserved-words,  Prev: literals,  Up: language-structure

9.2 Schema Object Names
=======================

* Menu:

* identifier-qualifiers::        Identifier Qualifiers
* identifier-case-sensitivity::  Identifier Case Sensitivity
* identifier-mapping::           Mapping of Identifiers to File Names
* function-resolution::          Function Name Parsing and Resolution

Certain objects within MySQL, including database, table, index, column,
alias, view, stored procedure, partition, tablespace, and other object
names are known as identifiers. This section describes the permissible
syntax for identifiers in MySQL.  *Note identifier-case-sensitivity::,
describes which types of identifiers are case sensitive and under what
conditions.

An identifier may be quoted or unquoted. If an identifier contains
special characters or is a reserved word, you _must_ quote it whenever
you refer to it.  (Exception: A reserved word that follows a period in
a qualified name must be an identifier, so it need not be quoted.)
Reserved words are listed at *Note reserved-words::.

Identifiers are converted to Unicode internally. They may contain these
characters:

   * Permitted characters in unquoted identifiers:

        * ASCII: [0-9,a-z,A-Z$_] (basic Latin letters, digits 0-9,
          dollar, underscore)

        * Extended: U+0080 .. U+FFFF

   * Permitted characters in quoted identifiers include the full
     Unicode Basic Multilingual Plane (BMP), except U+0000:

        * ASCII: U+0001 .. U+007F

        * Extended: U+0080 .. U+FFFF

   * ASCII NUL (U+0000) and supplementary characters (U+10000 and
     higher) are not permitted in quoted or unquoted identifiers.

   * Identifiers may begin with a digit but unless quoted may not
     consist solely of digits.

   * Database, table, and column names cannot end with space characters.

The identifier quote character is the backtick (```''):

     mysql> SELECT * FROM `select` WHERE `select`.id > 100;

If the `ANSI_QUOTES' SQL mode is enabled, it is also permissible to
quote identifiers within double quotation marks:

     mysql> CREATE TABLE "test" (col INT);
     ERROR 1064: You have an error in your SQL syntax...
     mysql> SET sql_mode='ANSI_QUOTES';
     mysql> CREATE TABLE "test" (col INT);
     Query OK, 0 rows affected (0.00 sec)

The `ANSI_QUOTES' mode causes the server to interpret double-quoted
strings as identifiers.  Consequently, when this mode is enabled,
string literals must be enclosed within single quotation marks. They
cannot be enclosed within double quotation marks. The server SQL mode
is controlled as described in *Note server-sql-mode::.

Identifier quote characters can be included within an identifier if you
quote the identifier. If the character to be included within the
identifier is the same as that used to quote the identifier itself,
then you need to double the character. The following statement creates
a table named `a`b' that contains a column named `c"d':

     mysql> CREATE TABLE `a``b` (`c"d` INT);

In the select list of a query, a quoted column alias can be specified
using identifier or string quoting characters:

     mysql> SELECT 1 AS `one`, 2 AS 'two';
     +-----+-----+
     | one | two |
     +-----+-----+
     |   1 |   2 |
     +-----+-----+

Elsewhere in the statement, quoted references to the alias must use
identifier quoting or the reference is treated as a string literal.

It is recommended that you do not use names that begin with `Me' or
`MeN', where M and N are integers. For example, avoid using `1e' as an
identifier, because an expression such as `1e+3' is ambiguous. Depending
on context, it might be interpreted as the expression `1e + 3' or as
the number `1e+3'.

Be careful when using `MD5()' to produce table names because it can
produce names in illegal or ambiguous formats such as those just
described.

A user variable cannot be used directly in an SQL statement as an
identifier or as part of an identifier. See *Note user-variables::, for
more information and examples of workarounds.

Special characters in database and table names are encoded in the
corresponding file system names as described in *Note
identifier-mapping::. If you have databases or tables from an older
version of MySQL that contain special characters and for which the
underlying directory names or file names have not been updated to use
the new encoding, the server displays their names with a prefix of
`#mysql50#'. For information about referring to such names or
converting them to the newer encoding, see that section.

The following table describes the maximum length for each type of
identifier.

This table describes the maximum length for each type of MySQL object
identifier.

Identifier  Maximum
            Length
            (characters)
Database    64
Table       64
Column      64
Index       64
Constraint  64
Stored      64
Procedure   
or Function 
Trigger     64
View        64
Event       64
Tablespace  64
Server      64
Log File    64
Group       
Alias       256 (see
            exception
            following
            table)
Compound    16
Statement   
Label       

Aliases for column names in *Note `CREATE VIEW': create-view.
statements are checked against the maximum column length of 64
characters (not the maximum alias length of 256 characters).

Identifiers are stored using Unicode (UTF-8). This applies to
identifiers in table definitions that are stored in `.frm' files and to
identifiers stored in the grant tables in the `mysql' database. The
sizes of the identifier string columns in the grant tables are measured
in characters. You can use multi-byte characters without reducing the
number of characters permitted for values stored in these columns,
something not true prior to MySQL 4.1. As indicated earlier, the
permissible Unicode characters are those in the Basic Multilingual
Plane (BMP). Supplementary characters are not permitted.


File: manual.info,  Node: identifier-qualifiers,  Next: identifier-case-sensitivity,  Prev: identifiers,  Up: identifiers

9.2.1 Identifier Qualifiers
---------------------------

MySQL permits names that consist of a single identifier or multiple
identifiers. The components of a multiple-part name must be separated
by period (``.'') characters. The initial parts of a multiple-part name
act as qualifiers that affect the context within which the final
identifier is interpreted.

In MySQL, you can refer to a table column using any of the following
forms.

This table lists forms (column references) that can be used to refer to
table columns.

Column Reference       Meaning
COL_NAME               The column COL_NAME from whichever table used in
                       the statement contains a column of that name.
TBL_NAME.COL_NAME      The column COL_NAME from table TBL_NAME of the
                       default database.
DB_NAME.TBL_NAME.COL_NAMEThe column COL_NAME from table TBL_NAME of the
                       database DB_NAME.

The qualifier character is a separate token and need not be contiguous
with the associated identifiers. For example, TBL_NAME.COL_NAME and
TBL_NAME . COL_NAME are equivalent.

If any components of a multiple-part name require quoting, quote them
individually rather than quoting the name as a whole. For example,
write ``my-table`.`my-column`', not ``my-table.my-column`'.

A reserved word that follows a period in a qualified name must be an
identifier, so in that context it need not be quoted.

You need not specify a TBL_NAME or DB_NAME.TBL_NAME prefix for a column
reference in a statement unless the reference would be ambiguous.
Suppose that tables `t1' and `t2' each contain a column `c', and you
retrieve `c' in a *Note `SELECT': select. statement that uses both `t1'
and `t2'. In this case, `c' is ambiguous because it is not unique among
the tables used in the statement. You must qualify it with a table name
as `t1.c' or `t2.c' to indicate which table you mean. Similarly, to
retrieve from a table `t' in database `db1' and from a table `t' in
database `db2' in the same statement, you must refer to columns in
those tables as `db1.t.COL_NAME' and `db2.t.COL_NAME'.

The syntax `.TBL_NAME' means the table TBL_NAME in the default
database. This syntax is accepted for ODBC compatibility because some
ODBC programs prefix table names with a ``.'' character.


File: manual.info,  Node: identifier-case-sensitivity,  Next: identifier-mapping,  Prev: identifier-qualifiers,  Up: identifiers

9.2.2 Identifier Case Sensitivity
---------------------------------

In MySQL, databases correspond to directories within the data
directory. Each table within a database corresponds to at least one
file within the database directory (and possibly more, depending on the
storage engine). Triggers also correspond to files. Consequently, the
case sensitivity of the underlying operating system plays a part in the
case sensitivity of database, table, and trigger names. This means such
names are not case sensitive in Windows, but are case sensitive in most
varieties of Unix. One notable exception is Mac OS X, which is
Unix-based but uses a default file system type (HFS+) that is not case
sensitive. However, Mac OS X also supports UFS volumes, which are case
sensitive just as on any Unix. See *Note extensions-to-ansi::. The
`lower_case_table_names' system variable also affects how the server
handles identifier case sensitivity, as described later in this section.

*Note*:

Although database, table, and trigger names are not case sensitive on
some platforms, you should not refer to one of these using different
cases within the same statement. The following statement would not work
because it refers to a table both as `my_table' and as `MY_TABLE':

     mysql> SELECT * FROM my_table WHERE MY_TABLE.col=1;

Column, index, stored routine, and event names are not case sensitive
on any platform, nor are column aliases.

However, names of logfile groups are case sensitive. This differs from
standard SQL.

By default, table aliases are case sensitive on Unix, but not so on
Windows or Mac OS X. The following statement would not work on Unix,
because it refers to the alias both as `a' and as `A':

     mysql> SELECT COL_NAME FROM TBL_NAME AS a
         -> WHERE a.COL_NAME = 1 OR A.COL_NAME = 2;

However, this same statement is permitted on Windows. To avoid problems
caused by such differences, it is best to adopt a consistent
convention, such as always creating and referring to databases and
tables using lowercase names. This convention is recommended for
maximum portability and ease of use.

How table and database names are stored on disk and used in MySQL is
affected by the `lower_case_table_names' system variable, which you can
set when starting *Note `mysqld': mysqld.  `lower_case_table_names' can
take the values shown in the following table. This variable does _not_
affect case sensitivity of trigger identifiers. On Unix, the default
value of `lower_case_table_names' is 0. On Windows the default value is
1. On Mac OS X, the default value is 2.

This table describes values for the `lower_case_table_names' system
variable.

Value   Meaning
`0'     Table and database names are stored on disk using the lettercase
        specified in the *Note `CREATE TABLE': create-table. or *Note
        `CREATE DATABASE': create-database. statement. Name comparisons
        are case sensitive. You should _not_ set this variable to 0 if
        you are running MySQL on a system that has case-insensitive file
        names (such as Windows or Mac OS X). If you force this variable
        to 0 with `--lower-case-table-names=0' on a case-insensitive
        file system and access `MyISAM' tablenames using different
        lettercases, index corruption may result.
`1'     Table names are stored in lowercase on disk and name comparisons
        are not case sensitive. MySQL converts all table names to
        lowercase on storage and lookup. This behavior also applies to
        database names and table aliases.
`2'     Table and database names are stored on disk using the lettercase
        specified in the *Note `CREATE TABLE': create-table. or *Note
        `CREATE DATABASE': create-database. statement, but MySQL
        converts them to lowercase on lookup. Name comparisons are not
        case sensitive. This works _only_ on file systems that are not
        case sensitive!  `InnoDB' table names are stored in lowercase,
        as for `lower_case_table_names=1'.

If you are using MySQL on only one platform, you do not normally have
to change the `lower_case_table_names' variable from its default value.
However, you may encounter difficulties if you want to transfer tables
between platforms that differ in file system case sensitivity. For
example, on Unix, you can have two different tables named `my_table' and
`MY_TABLE', but on Windows these two names are considered identical. To
avoid data transfer problems arising from lettercase of database or
table names, you have two options:

   * Use `lower_case_table_names=1' on all systems. The main
     disadvantage with this is that when you use *Note `SHOW TABLES':
     show-tables. or *Note `SHOW DATABASES': show-databases, you do not
     see the names in their original lettercase.

   * Use `lower_case_table_names=0' on Unix and
     `lower_case_table_names=2' on Windows. This preserves the
     lettercase of database and table names. The disadvantage of this
     is that you must ensure that your statements always refer to your
     database and table names with the correct lettercase on Windows.
     If you transfer your statements to Unix, where lettercase is
     significant, they do not work if the lettercase is incorrect.

     *Exception*: If you are using `InnoDB' tables and you are trying
     to avoid these data transfer problems, you should set
     `lower_case_table_names' to 1 on all platforms to force names to
     be converted to lowercase.

If you plan to set the `lower_case_table_names' system variable to 1 on
Unix, you must first convert your old database and table names to
lowercase before stopping *Note `mysqld': mysqld. and restarting it
with the new variable setting. To do this for an individual table, use
*Note `RENAME TABLE': rename-table.:

     RENAME TABLE T1 TO t1;

To convert one or more entire databases, dump them before setting
`lower_case_table_names', then drop the databases, and reload them
after setting `lower_case_table_names':

  1. Use *Note `mysqldump': mysqldump. to dump each database:

          mysqldump --databases db1 > db1.sql
          mysqldump --databases db2 > db2.sql
          ...

     Do this for each database that must be recreated.

  2. Use `DROP DATABASE' to drop each database.

  3. Stop the server, set `lower_case_table_names', and restart the
     server.

  4. Reload the dump file for each database. Because
     `lower_case_table_names' is set, each database and table name will
     be converted to lowercase as it is recreated:

          mysql < db1.sql
          mysql < db2.sql
          ...

Object names may be considered duplicates if their uppercase forms are
equal according to a binary collation. That is true for names of
cursors, conditions, procedures, functions, savepoints, stored routine
parameters, stored program local variables, and plugins. It is not true
for names of columns, constraints, databases, partitions, statements
prepared with *Note `PREPARE': prepare, tables, triggers, users, and
user-defined variables.

File system case sensitivity can affect searches in string columns of
`INFORMATION_SCHEMA' tables. For more information, see *Note
charset-collation-information-schema::.


File: manual.info,  Node: identifier-mapping,  Next: function-resolution,  Prev: identifier-case-sensitivity,  Up: identifiers

9.2.3 Mapping of Identifiers to File Names
------------------------------------------

There is a correspondence between database and table identifiers and
names in the file system. For the basic structure, MySQL represents
each database as a directory in the data directory, and each table by
one or more files in the appropriate database directory. For the table
format files (`.FRM'), the data is always stored in this structure and
location.

For the data and index files, the exact representation on disk is
storage engine specific. These files may be stored in the same location
as the `FRM' files, or the information may be stored in a separate file.
`InnoDB' data is stored in the InnoDB data files. If you are using
tablespaces with `InnoDB', then the specific tablespace files you
create are used instead.

Any character is legal in database or table identifiers except ASCII
NUL (`0x00'). MySQL encodes any characters that are problematic in the
corresponding file system objects when it creates database directories
or table files:

   * Basic Latin letters (`a..zA..Z'), digits (`0..9') and underscore
     (`_') are encoded as is. Consequently, their case sensitivity
     directly depends on file system features.

   * All other national letters from alphabets that have
     uppercase/lowercase mapping are encoded as shown in the following
     table. Values in the Code Range column are UCS-2 values.

     This table shows the encoding for national letters from alphabets
     that have uppercase/lowercase mapping, excluding basic Latin
     letters (`a..zA..Z'), digits (`0..9') and underscore (`_'), which
     are encoded as is.

     Code Range Pattern    Number     Used       Unused     Blocks
     00C0..017F [@][0..4][g..z]5*20= 100  97         3          Latin-1
                                                            Supplement +
                                                            Latin Extended-A
     0370..03FF [@][5..9][g..z]5*20= 100  88         12         Greek and Coptic
     0400..052F [@][g..z][0..6]20*7= 140  137        3          Cyrillic +
                                                            Cyrillic
                                                            Supplement
     0530..058F [@][g..z][7..8]20*2= 40   38         2          Armenian
     2160..217F [@][g..z][9]20*1= 20   16         4          Number Forms
     0180..02AF [@][g..z][a..k]20*11=220  203        17         Latin Extended-B
                                                            + IPA Extensions
     1E00..1EFF [@][g..z][l..r]20*7= 140  136        4          Latin Extended
                                                            Additional
     1F00..1FFF [@][g..z][s..z]20*8= 160  144        16         Greek Extended
     .... ....  [@][a..f][g..z]6*20= 120  0          120        RESERVED
     24B6..24E9 [@][@][a..z]26         26         0          Enclosed
                                                            Alphanumerics
     FF21..FF5A [@][a..z][@]26         26         0          Halfwidth and
                                                            Fullwidth forms

     One of the bytes in the sequence encodes lettercase. For example:
     `LATIN CAPITAL LETTER A WITH GRAVE' is encoded as `@0G', whereas
     `LATIN SMALL LETTER A WITH GRAVE' is encoded as `@0g'. Here the
     third byte (`G' or `g') indicates lettercase. (On a
     case-insensitive file system, both letters will be treated as the
     same.)

     For some blocks, such as Cyrillic, the second byte determines
     lettercase. For other blocks, such as Latin1 Supplement, the third
     byte determines lettercase. If two bytes in the sequence are
     letters (as in Greek Extended), the leftmost letter character
     stands for lettercase. All other letter bytes must be in lowercase.

   * All nonletter characters except underscore (`_'), as well as
     letters from alphabets that do not have uppercase/lowercase
     mapping (such as Hebrew) are encoded using hexadecimal
     representation using lowercase letters for hex digits `a..f':

          0x003F -> @003f
          0xFFFF -> @ffff

     The hexadecimal values correspond to character values in the
     `ucs2' double-byte character set.

On Windows, some names such as `nul', `prn', and `aux' are encoded by
appending `@@@' to the name when the server creates the corresponding
file or directory. This occurs on all platforms for portability of the
corresponding database object between platforms.

If you have databases or tables from a version of MySQL older than
5.1.6 that contain special characters and for which the underlying
directory names or file names have not been updated to use the new
encoding, the server displays their names with a prefix of `#mysql50#'
in the output from `INFORMATION_SCHEMA' tables or *Note `SHOW': show.
statements. For example, if you have a table named `a@b' and its name
encoding has not been updated, *Note `SHOW TABLES': show-tables.
displays it like this:

     mysql> SHOW TABLES;
     +----------------+
     | Tables_in_test |
     +----------------+
     | #mysql50#a@b   |
     +----------------+

To refer to such a name for which the encoding has not been updated,
you must supply the `#mysql50#' prefix:

     mysql> SHOW COLUMNS FROM `a@b`;
     ERROR 1146 (42S02): Table 'test.a@b' doesn't exist

     mysql> SHOW COLUMNS FROM `#mysql50#a@b`;
     +-------+---------+------+-----+---------+-------+
     | Field | Type    | Null | Key | Default | Extra |
     +-------+---------+------+-----+---------+-------+
     | i     | int(11) | YES  |     | NULL    |       |
     +-------+---------+------+-----+---------+-------+

To update old names to eliminate the need to use the special prefix to
refer to them, re-encode them with *Note `mysqlcheck': mysqlcheck. The
following command updates all names to the new encoding:

     shell> mysqlcheck --check-upgrade --fix-db-names --fix-table-names --all-databases

To check only specific databases or tables, omit `--all-databases' and
provide the appropriate database or table arguments. For information
about *Note `mysqlcheck': mysqlcheck. invocation syntax, see *Note
mysqlcheck::.

*Note*:

The `#mysql50#' prefix is intended only to be used internally by the
server. You should not create databases or tables with names that use
this prefix.

Also, *Note `mysqlcheck': mysqlcheck. cannot fix names that contain
literal instances of the `@' character that is used for encoding
special characters. If you have databases or tables that contain this
character, use *Note `mysqldump': mysqldump. to dump them before
upgrading to MySQL 5.1.6 or later, and then reload the dump file after
upgrading.


File: manual.info,  Node: function-resolution,  Prev: identifier-mapping,  Up: identifiers

9.2.4 Function Name Parsing and Resolution
------------------------------------------

MySQL 5.5 supports built-in (native) functions, user-defined functions
(UDFs), and stored functions. This section describes how the server
recognizes whether the name of a built-in function is used as a
function call or as an identifier, and how the server determines which
function to use in cases when functions of different types exist with a
given name.

*Built-In Function Name Parsing*

The parser uses default rules for parsing names of built-in functions.
These rules can be changed by enabling the `IGNORE_SPACE' SQL mode.

When the parser encounters a word that is the name of a built-in
function, it must determine whether the name signifies a function call
or is instead a nonexpression reference to an identifier such as a
table or column name. For example, in the following statements, the
first reference to `count' is a function call, whereas the second
reference is a table name:

     SELECT COUNT(*) FROM mytable;
     CREATE TABLE count (i INT);

The parser should recognize the name of a built-in function as
indicating a function call only when parsing what is expected to be an
expression. That is, in nonexpression context, function names are
permitted as identifiers.

However, some built-in functions have special parsing or implementation
considerations, so the parser uses the following rules by default to
distinguish whether their names are being used as function calls or as
identifiers in nonexpression context:

   * To use the name as a function call in an expression, there must be
     no whitespace between the name and the following ``('' parenthesis
     character.

   * Conversely, to use the function name as an identifier, it must not
     be followed immediately by a parenthesis.

The requirement that function calls be written with no whitespace
between the name and the parenthesis applies only to the built-in
functions that have special considerations.  `COUNT' is one such name.
The exact list of function names for which following whitespace
determines their interpretation are those listed in the
`sql_functions[]' array of the `sql/lex.h' source file. Before MySQL
5.1, these are rather numerous (about 200), so you may find it easiest
to treat the no-whitespace requirement as applying to all function
calls. In MySQL 5.1 and later, parser improvements reduce to about 30
the number of affected function names.

For functions not listed in the `sql_functions[]') array, whitespace
does not matter. They are interpreted as function calls only when used
in expression context and may be used freely as identifiers otherwise.
`ASCII' is one such name. However, for these nonaffected function
names, interpretation may vary in expression context: `FUNC_NAME ()' is
interpreted as a built-in function if there is one with the given name;
if not, `FUNC_NAME ()' is interpreted as a user-defined function or
stored function if one exists with that name.

The `IGNORE_SPACE' SQL mode can be used to modify how the parser treats
function names that are whitespace-sensitive:

   * With `IGNORE_SPACE' disabled, the parser interprets the name as a
     function call when there is no whitespace between the name and the
     following parenthesis. This occurs even when the function name is
     used in nonexpression context:

          mysql> CREATE TABLE count(i INT);
          ERROR 1064 (42000): You have an error in your SQL syntax ...
          near 'count(i INT)'

     To eliminate the error and cause the name to be treated as an
     identifier, either use whitespace following the name or write it
     as a quoted identifier (or both):

          CREATE TABLE count (i INT);
          CREATE TABLE `count`(i INT);
          CREATE TABLE `count` (i INT);

   * With `IGNORE_SPACE' enabled, the parser loosens the requirement
     that there be no whitespace between the function name and the
     following parenthesis. This provides more flexibility in writing
     function calls. For example, either of the following function
     calls are legal:

          SELECT COUNT(*) FROM mytable;
          SELECT COUNT (*) FROM mytable;

     However, enabling `IGNORE_SPACE' also has the side effect that the
     parser treats the affected function names as reserved words (see
     *Note reserved-words::). This means that a space following the
     name no longer signifies its use as an identifier. The name can be
     used in function calls with or without following whitespace, but
     causes a syntax error in nonexpression context unless it is
     quoted. For example, with `IGNORE_SPACE' enabled, both of the
     following statements fail with a syntax error because the parser
     interprets `count' as a reserved word:

          CREATE TABLE count(i INT);
          CREATE TABLE count (i INT);

     To use the function name in nonexpression context, write it as a
     quoted identifier:

          CREATE TABLE `count`(i INT);
          CREATE TABLE `count` (i INT);

To enable the `IGNORE_SPACE' SQL mode, use this statement:

     SET sql_mode = 'IGNORE_SPACE';

`IGNORE_SPACE' is also enabled by certain other composite modes such as
`ANSI' that include it in their value:

     SET sql_mode = 'ANSI';

Check *Note server-sql-mode::, to see which composite modes enable
`IGNORE_SPACE'.

To minimize the dependency of SQL code on the `IGNORE_SPACE' setting,
use these guidelines:

   * Avoid creating UDFs or stored functions that have the same name as
     a built-in function.

   * Avoid using function names in nonexpression context. For example,
     these statements use `count' (one of the affected function names
     affected by `IGNORE_SPACE'), so they fail with or without
     whitespace following the name if `IGNORE_SPACE' is enabled:

          CREATE TABLE count(i INT);
          CREATE TABLE count (i INT);

     If you must use a function name in nonexpression context, write it
     as a quoted identifier:

          CREATE TABLE `count`(i INT);
          CREATE TABLE `count` (i INT);

The number of function names affected by `IGNORE_SPACE' was reduced
significantly in MySQL 5.1.13, from about 200 to about 30. As of MySQL
5.1.13, only the following functions are still affected by the
`IGNORE_SPACE' setting.

This table lists functions that are still affected by the `IGNORE_SPACE'
setting as of MySQL 5.1.13.

`ADDDATE'          `BIT_AND'          `BIT_OR'           `BIT_XOR'
`CAST'             `COUNT'            `CURDATE'          `CURTIME'
`DATE_ADD'         `DATE_SUB'         `EXTRACT'          `GROUP_CONCAT'
`MAX'              `MID'              `MIN'              `NOW'
`POSITION'         `SESSION_USER'     `STD'              `STDDEV'
`STDDEV_POP'       `STDDEV_SAMP'      `SUBDATE'          `SUBSTR'
`SUBSTRING'        `SUM'              `SYSDATE'          `SYSTEM_USER'
`TRIM'             `VARIANCE'         `VAR_POP'          `VAR_SAMP'

For earlier versions of MySQL, check the contents of the
`sql_functions[]' array in the `sql/lex.h' source file to see which
functions are affected by `IGNORE_SPACE'.

*Incompatibility warning*: The change in MySQL 5.1.13 that reduces the
number of function names affected by `IGNORE_SPACE' improves the
consistency of parser operation. However, it also introduces the
possibility of incompatibility for old SQL code that relies on the
following conditions:

   * `IGNORE_SPACE' is disabled.

   * The presence or absence of whitespace following a function name is
     used to distinguish between a built-in function and stored
     function that have the same name, such as `PI()' versus `PI ()'.

For functions that are no longer affected by `IGNORE_SPACE' as of MySQL
5.1.13, that strategy no longer works. Either of the following
approaches can be used if you have code that is subject to the
preceding incompatibility:

   * If a stored function has a name that conflicts with a built-in
     function, refer to the stored function with a schema name
     qualifier, regardless of whether whitespace is present. For
     example, write `SCHEMA_NAME.PI()' or `SCHEMA_NAME.PI ()'.

   * Alternatively, rename the stored function to use a nonconflicting
     name and change invocations of the function to use the new name.

*Function Name Resolution*

The following rules describe how the server resolves references to
function names for function creation and invocation:

   * Built-in functions and user-defined functions

     An error occurs if you try to create a UDF with the same name as a
     built-in function.

   * Built-in functions and stored functions

     It is possible to create a stored function with the same name as a
     built-in function, but to invoke the stored function it is
     necessary to qualify it with a schema name.  For example, if you
     create a stored function named `PI' in the `test' schema, you
     invoke it as `test.PI()' because the server resolves `PI()' as a
     reference to the built-in function. The server creates a warning
     if the stored function name collides with a built-in function
     name. The warning can be displayed with *Note `SHOW WARNINGS':
     show-warnings.

   * User-defined functions and stored functions

     User-defined functions and stored functions share the same
     namespace, so you cannot create a UDF and a stored function with
     the same name.

The preceding function name resolution rules have implications for
upgrading to versions of MySQL that implement new built-in functions:

   * If you have already created a user-defined function with a given
     name and upgrade MySQL to a version that implements a new built-in
     function with the same name, the UDF becomes inaccessible. To
     correct this, use *Note `DROP FUNCTION': drop-function. to drop
     the UDF, and then use *Note `CREATE FUNCTION': create-function. to
     re-create the UDF with a different nonconflicting name.

   * If a new version of MySQL implements a built-in function with the
     same name as an existing stored function, you have two choices:
     Rename the stored function to use a nonconflicting name, or change
     calls to the function so that they use a schema qualifier (that
     is, use `SCHEMA_NAME.FUNC_NAME()' syntax).


File: manual.info,  Node: reserved-words,  Next: user-variables,  Prev: identifiers,  Up: language-structure

9.3 Reserved Words
==================

Certain words such as *Note `SELECT': select, *Note `DELETE': delete, or
*Note `BIGINT': integer-types. are reserved and require special
treatment for use as identifiers such as table and column names. This
may also be true for the names of built-in functions.

Reserved words are permitted as identifiers if you quote them as
described in *Note identifiers:::

     mysql> CREATE TABLE interval (begin INT, end INT);
     ERROR 1064 (42000): You have an error in your SQL syntax ...
     near 'interval (begin INT, end INT)'

     mysql> CREATE TABLE `interval` (begin INT, end INT);
     Query OK, 0 rows affected (0.01 sec)

Exception: A word that follows a period in a qualified name must be an
identifier, so it need not be quoted even if it is reserved:

     mysql> CREATE TABLE mydb.interval (begin INT, end INT);
     Query OK, 0 rows affected (0.01 sec)

Names of built-in functions are permitted as identifiers but may
require care to be used as such. For example, `COUNT' is acceptable as
a column name. However, by default, no whitespace is permitted in
function invocations between the function name and the following ``(''
character. This requirement enables the parser to distinguish whether
the name is used in a function call or in nonfunction context. For
further detail on recognition of function names, see *Note
function-resolution::.

The words in the following table are explicitly reserved in MySQL 5.5.
In addition, `_FILENAME' is reserved. At some point, you might upgrade
to a higher version, so it is a good idea to have a look at future
reserved words, too.  You can find these in the manuals that cover
higher versions of MySQL. Most of the words in the table are forbidden
by standard SQL as column or table names (for example, `GROUP'). A few
are reserved because MySQL needs them and uses a `yacc' parser. A
reserved word can be used as an identifier if you quote it.

For a more detailed list of reserved words, including differences
between versions, see Reserved Words in MySQL 5.5
(http://dev.mysql.com/doc/mysqld-version-reference/en/mysqld-version-reference-reservedwords-5-5.html).

*Reserved Words in MySQL 5.5.35*

`ACCESSIBLE'             `ADD'                    `ALL'
`ALTER'                  `ANALYZE'                `AND'
`AS'                     `ASC'                    `ASENSITIVE'
`BEFORE'                 `BETWEEN'                `BIGINT'
`BINARY'                 `BLOB'                   `BOTH'
`BY'                     `CALL'                   `CASCADE'
`CASE'                   `CHANGE'                 `CHAR'
`CHARACTER'              `CHECK'                  `COLLATE'
`COLUMN'                 `CONDITION'              `CONSTRAINT'
`CONTINUE'               `CONVERT'                `CREATE'
`CROSS'                  `CURRENT_DATE'           `CURRENT_TIME'
`CURRENT_TIMESTAMP'      `CURRENT_USER'           `CURSOR'
`DATABASE'               `DATABASES'              `DAY_HOUR'
`DAY_MICROSECOND'        `DAY_MINUTE'             `DAY_SECOND'
`DEC'                    `DECIMAL'                `DECLARE'
`DEFAULT'                `DELAYED'                `DELETE'
`DESC'                   `DESCRIBE'               `DETERMINISTIC'
`DISTINCT'               `DISTINCTROW'            `DIV'
`DOUBLE'                 `DROP'                   `DUAL'
`EACH'                   `ELSE'                   `ELSEIF'
`ENCLOSED'               `ESCAPED'                `EXISTS'
`EXIT'                   `EXPLAIN'                `FALSE'
`FETCH'                  `FLOAT'                  `FLOAT4'
`FLOAT8'                 `FOR'                    `FORCE'
`FOREIGN'                `FROM'                   `FULLTEXT'
`GRANT'                  `GROUP'                  `HAVING'
`HIGH_PRIORITY'          `HOUR_MICROSECOND'       `HOUR_MINUTE'
`HOUR_SECOND'            `IF'                     `IGNORE'
`IN'                     `INDEX'                  `INFILE'
`INNER'                  `INOUT'                  `INSENSITIVE'
`INSERT'                 `INT'                    `INT1'
`INT2'                   `INT3'                   `INT4'
`INT8'                   `INTEGER'                `INTERVAL'
`INTO'                   `IS'                     `ITERATE'
`JOIN'                   `KEY'                    `KEYS'
`KILL'                   `LEADING'                `LEAVE'
`LEFT'                   `LIKE'                   `LIMIT'
`LINEAR'                 `LINES'                  `LOAD'
`LOCALTIME'              `LOCALTIMESTAMP'         `LOCK'
`LONG'                   `LONGBLOB'               `LONGTEXT'
`LOOP'                   `LOW_PRIORITY'           `MASTER_SSL_VERIFY_SERVER_CERT'
`MATCH'                  `MAXVALUE'               `MEDIUMBLOB'
`MEDIUMINT'              `MEDIUMTEXT'             `MIDDLEINT'
`MINUTE_MICROSECOND'     `MINUTE_SECOND'          `MOD'
`MODIFIES'               `NATURAL'                `NOT'
`NO_WRITE_TO_BINLOG'     `NULL'                   `NUMERIC'
`ON'                     `OPTIMIZE'               `OPTION'
`OPTIONALLY'             `OR'                     `ORDER'
`OUT'                    `OUTER'                  `OUTFILE'
`PRECISION'              `PRIMARY'                `PROCEDURE'
`PURGE'                  `RANGE'                  `READ'
`READS'                  `READ_WRITE'             `REAL'
`REFERENCES'             `REGEXP'                 `RELEASE'
`RENAME'                 `REPEAT'                 `REPLACE'
`REQUIRE'                `RESIGNAL'               `RESTRICT'
`RETURN'                 `REVOKE'                 `RIGHT'
`RLIKE'                  `SCHEMA'                 `SCHEMAS'
`SECOND_MICROSECOND'     `SELECT'                 `SENSITIVE'
`SEPARATOR'              `SET'                    `SHOW'
`SIGNAL'                 `SMALLINT'               `SPATIAL'
`SPECIFIC'               `SQL'                    `SQLEXCEPTION'
`SQLSTATE'               `SQLWARNING'             `SQL_BIG_RESULT'
`SQL_CALC_FOUND_ROWS'    `SQL_SMALL_RESULT'       `SSL'
`STARTING'               `STRAIGHT_JOIN'          `TABLE'
`TERMINATED'             `THEN'                   `TINYBLOB'
`TINYINT'                `TINYTEXT'               `TO'
`TRAILING'               `TRIGGER'                `TRUE'
`UNDO'                   `UNION'                  `UNIQUE'
`UNLOCK'                 `UNSIGNED'               `UPDATE'
`USAGE'                  `USE'                    `USING'
`UTC_DATE'               `UTC_TIME'               `UTC_TIMESTAMP'
`VALUES'                 `VARBINARY'              `VARCHAR'
`VARCHARACTER'           `VARYING'                `WHEN'
`WHERE'                  `WHILE'                  `WITH'
`WRITE'                  `XOR'                    `YEAR_MONTH'
`ZEROFILL'                                        

*New Reserved Words in MySQL 5.5*

`GENERAL'                `IGNORE_SERVER_IDS'      `MASTER_HEARTBEAT_PERIOD'
`MAXVALUE'               `RESIGNAL'               `SIGNAL'
`SLOW'                                            

MySQL permits some keywords to be used as unquoted identifiers because
many people previously used them. Examples are those in the following
list:

   * `ACTION'

   * *Note `BIT': bit-type.

   * *Note `DATE': datetime.

   * *Note `ENUM': enum.

   * `NO'

   * *Note `TEXT': blob.

   * *Note `TIME': time.

   * *Note `TIMESTAMP': datetime.


File: manual.info,  Node: user-variables,  Next: expressions,  Prev: reserved-words,  Up: language-structure

9.4 User-Defined Variables
==========================

You can store a value in a user-defined variable in one statement and
then refer to it later in another statement. This enables you to pass
values from one statement to another.  _User-defined variables are
session-specific_.  That is, a user variable defined by one client
cannot be seen or used by other clients. All variables for a given
client session are automatically freed when that client exits.

User variables are written as `@VAR_NAME', where the variable name
VAR_NAME consists of alphanumeric characters, ``.'', ``_'', and ``$''.
A user variable name can contain other characters if you quote it as a
string or identifier (for example, `@'my-var'', `@"my-var"', or
`@`my-var`').

User variable names are not case sensitive in MySQL 5.0 and up.

One way to set a user-defined variable is by issuing a *Note `SET':
set-statement.  statement:

     SET @VAR_NAME = EXPR [, @VAR_NAME = EXPR] ...

For *Note `SET': set-statement, either `=' or `:=' can be used as the
assignment operator.

You can also assign a value to a user variable in statements other than
*Note `SET': set-statement.  In this case, the assignment operator must
be `:=' and not `=' because the latter is treated as the comparison
operator `=' in non-*Note `SET': set-statement.  statements:

     mysql> SET @t1=1, @t2=2, @t3:=4;
     mysql> SELECT @t1, @t2, @t3, @t4 := @t1+@t2+@t3;
     +------+------+------+--------------------+
     | @t1  | @t2  | @t3  | @t4 := @t1+@t2+@t3 |
     +------+------+------+--------------------+
     |    1 |    2 |    4 |                  7 |
     +------+------+------+--------------------+

User variables can be assigned a value from a limited set of data
types: integer, decimal, floating-point, binary or nonbinary string, or
`NULL' value. Assignment of decimal and real values does not preserve
the precision or scale of the value. A value of a type other than one
of the permissible types is converted to a permissible type. For
example, a value having a temporal or spatial data type is converted to
a binary string.

If a user variable is assigned a nonbinary (character) string value, it
has the same character set and collation as the string.  The
coercibility of user variables is implicit. (This is the same
coercibility as for table column values.)

Bit values assigned to user variables are treated as binary strings. To
assign a bit value as a number to a user variable, use `CAST()' or `+0':

     mysql> SET @v1 = b'1000001';
     mysql> SET @v2 = CAST(b'1000001' AS UNSIGNED), @v3 = b'1000001'+0;
     mysql> SELECT @v1, @v2, @v3;
     +------+------+------+
     | @v1  | @v2  | @v3  |
     +------+------+------+
     | A    |   65 |   65 |
     +------+------+------+

If the value of a user variable is selected in a result set, it is
returned to the client as a string.

If you refer to a variable that has not been initialized, it has a
value of `NULL' and a type of string.

User variables may be used in most contexts where expressions are
permitted. This does not currently include contexts that explicitly
require a literal value, such as in the `LIMIT' clause of a *Note
`SELECT': select. statement, or the `IGNORE N LINES' clause of a *Note
`LOAD DATA': load-data. statement.

As a general rule, other than in *Note `SET': set-statement.
statements, you should never assign a value to a user variable and read
the value within the same statement. For example, to increment a
variable, this is okay:

     SET @a = @a + 1;

For other statements, such as *Note `SELECT': select, you might get the
results you expect, but this is not guaranteed. In the following
statement, you might think that MySQL will evaluate `@a' first and then
do an assignment second:

     SELECT @a, @a:=@a+1, ...;

However, the order of evaluation for expressions involving user
variables is undefined.

Another issue with assigning a value to a variable and reading the
value within the same non-*Note `SET': set-statement.  statement is
that the default result type of a variable is based on its type at the
start of the statement. The following example illustrates this:

     mysql> SET @a='test';
     mysql> SELECT @a,(@a:=20) FROM TBL_NAME;

For this *Note `SELECT': select. statement, MySQL reports to the client
that column one is a string and converts all accesses of `@a' to
strings, even though @a is set to a number for the second row. After the
*Note `SELECT': select. statement executes, `@a' is regarded as a
number for the next statement.

To avoid problems with this behavior, either do not assign a value to
and read the value of the same variable within a single statement, or
else set the variable to `0', `0.0', or `''' to define its type before
you use it.

In a *Note `SELECT': select. statement, each select expression is
evaluated only when sent to the client. This means that in a `HAVING',
`GROUP BY', or `ORDER BY' clause, referring to a variable that is
assigned a value in the select expression list does _not_ work as
expected:

     mysql> SELECT (@aa:=id) AS a, (@aa+3) AS b FROM TBL_NAME HAVING b=5;

The reference to `b' in the `HAVING' clause refers to an alias for an
expression in the select list that uses `@aa'.  This does not work as
expected: `@aa' contains the value of `id' from the previous selected
row, not from the current row.

User variables are intended to provide data values. They cannot be used
directly in an SQL statement as an identifier or as part of an
identifier, such as in contexts where a table or database name is
expected, or as a reserved word such as *Note `SELECT': select. This is
true even if the variable is quoted, as shown in the following example:

     mysql> SELECT c1 FROM t;
     +----+
     | c1 |
     +----+
     |  0 |
     +----+
     |  1 |
     +----+
     2 rows in set (0.00 sec)

     mysql> SET @col = "c1";
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT @col FROM t;
     +------+
     | @col |
     +------+
     | c1   |
     +------+
     1 row in set (0.00 sec)

     mysql> SELECT `@col` FROM t;
     `ERROR 1054 (42S22): Unknown column '@col' in 'field list''

     mysql> SET @col = "`c1`";
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT @col FROM t;
     +------+
     | @col |
     +------+
     | `c1` |
     +------+
     1 row in set (0.00 sec)

An exception to this principle that user variables cannot be used to
provide identifiers is that if you are constructing a string for use as
a prepared statement to be executed later. In this case, user variables
can be used to provide any part of the statement. The following example
illustrates how this can be done:

     mysql> SET @c = "c1";
     Query OK, 0 rows affected (0.00 sec)

     mysql> SET @s = CONCAT("SELECT ", @c, " FROM t");
     Query OK, 0 rows affected (0.00 sec)

     mysql> PREPARE stmt FROM @s;
     Query OK, 0 rows affected (0.04 sec)
     Statement prepared

     mysql> EXECUTE stmt;
     +----+
     | c1 |
     +----+
     |  0 |
     +----+
     |  1 |
     +----+
     2 rows in set (0.00 sec)

     mysql> DEALLOCATE PREPARE stmt;
     Query OK, 0 rows affected (0.00 sec)

See *Note sql-syntax-prepared-statements::, for more information.

A similar technique can be used in application programs to construct
SQL statements using program variables, as shown here using PHP 5:

     <?php
       $mysqli = new mysqli("localhost", "user", "pass", "test");

       if( mysqli_connect_errno() )
         die("Connection failed: %s\n", mysqli_connect_error());

       $col = "c1";

       $query = "SELECT $col FROM t";

       $result = $mysqli->query($query);

       while($row = $result->fetch_assoc())
       {
         echo "<p>" . $row["$col"] . "</p>\n";
       }

       $result->close();

       $mysqli->close();
     ?>

Assembling an SQL statement in this fashion is sometimes known as
`Dynamic SQL'.


File: manual.info,  Node: expressions,  Next: comments,  Prev: user-variables,  Up: language-structure

9.5 Expression Syntax
=====================

The following rules define expression syntax in MySQL. The grammar
shown here is based on that given in the `sql/sql_yacc.yy' file of
MySQL source distributions. See the notes after the grammar for
additional information about some of the terms. Operator precedence is
given in *Note operator-precedence::.

     EXPR:
         EXPR OR EXPR
       | EXPR || EXPR
       | EXPR XOR EXPR
       | EXPR AND EXPR
       | EXPR && EXPR
       | NOT EXPR
       | ! EXPR
       | BOOLEAN_PRIMARY IS [NOT] {TRUE | FALSE | UNKNOWN}
       | BOOLEAN_PRIMARY

     BOOLEAN_PRIMARY:
         BOOLEAN_PRIMARY IS [NOT] NULL
       | BOOLEAN_PRIMARY <=> PREDICATE
       | BOOLEAN_PRIMARY COMPARISON_OPERATOR PREDICATE
       | BOOLEAN_PRIMARY COMPARISON_OPERATOR {ALL | ANY} (SUBQUERY)
       | PREDICATE

     COMPARISON_OPERATOR: = | >= | > | <= | < | <> | !=

     PREDICATE:
         BIT_EXPR [NOT] IN (SUBQUERY)
       | BIT_EXPR [NOT] IN (EXPR [, EXPR] ...)
       | BIT_EXPR [NOT] BETWEEN BIT_EXPR AND PREDICATE
       | BIT_EXPR SOUNDS LIKE BIT_EXPR
       | BIT_EXPR [NOT] LIKE SIMPLE_EXPR [ESCAPE SIMPLE_EXPR]
       | BIT_EXPR [NOT] REGEXP BIT_EXPR
       | BIT_EXPR

     BIT_EXPR:
         BIT_EXPR | BIT_EXPR
       | BIT_EXPR & BIT_EXPR
       | BIT_EXPR << BIT_EXPR
       | BIT_EXPR >> BIT_EXPR
       | BIT_EXPR + BIT_EXPR
       | BIT_EXPR - BIT_EXPR
       | BIT_EXPR * BIT_EXPR
       | BIT_EXPR / BIT_EXPR
       | BIT_EXPR DIV BIT_EXPR
       | BIT_EXPR MOD BIT_EXPR
       | BIT_EXPR % BIT_EXPR
       | BIT_EXPR ^ BIT_EXPR
       | BIT_EXPR + INTERVAL_EXPR
       | BIT_EXPR - INTERVAL_EXPR
       | SIMPLE_EXPR

     SIMPLE_EXPR:
         LITERAL
       | IDENTIFIER
       | FUNCTION_CALL
       | SIMPLE_EXPR COLLATE COLLATION_NAME
       | PARAM_MARKER
       | VARIABLE
       | SIMPLE_EXPR || SIMPLE_EXPR
       | + SIMPLE_EXPR
       | - SIMPLE_EXPR
       | ~ SIMPLE_EXPR
       | ! SIMPLE_EXPR
       | BINARY SIMPLE_EXPR
       | (EXPR [, EXPR] ...)
       | ROW (EXPR, EXPR [, EXPR] ...)
       | (SUBQUERY)
       | EXISTS (SUBQUERY)
       | {IDENTIFIER EXPR}
       | MATCH_EXPR
       | CASE_EXPR
       | INTERVAL_EXPR

Notes:

For literal value syntax, see *Note literals::.

For identifier syntax, see *Note identifiers::.

Variables can be user variables, system variables, or stored program
local variables or parameters:

   * User variables: *Note user-variables::

   * System variables: *Note using-system-variables::

   * Local variables: *Note declare-local-variable::

   * Parameters: *Note create-procedure::

PARAM_MARKER is `'?'' as used in prepared statements for placeholders.
See *Note prepare::.

`(SUBQUERY)' indicates a subquery that returns a single value; that is,
a scalar subquery. See *Note scalar-subqueries::.

`{IDENTIFIER EXPR}' is ODBC escape syntax and is accepted for ODBC
compatibility. The value is EXPR. The curly braces in the syntax should
be written literally; they are not metasyntax as used elsewhere in
syntax descriptions.

MATCH_EXPR indicates a `MATCH' expression. See *Note fulltext-search::.

CASE_EXPR indicates a `CASE' expression. See *Note
control-flow-functions::.

INTERVAL_EXPR represents a time interval. The syntax is `INTERVAL EXPR
UNIT', where UNIT is a specifier such as `HOUR', `DAY', or `WEEK'. For
the full list of UNIT specifiers, see the description of the
`DATE_ADD()' function in *Note date-and-time-functions::.

The meaning of some operators depends on the SQL mode:

   * By default, `||' is a logical `OR' operator. With
     `PIPES_AS_CONCAT' enabled, `||' is string concatenation, with a
     precedence between `^' and the unary operators.

   * By default, `!' has a higher precedence than `NOT'. With
     `HIGH_NOT_PRECEDENCE' enabled, `!' and `NOT' have the same
     precedence.

See *Note server-sql-mode::.


File: manual.info,  Node: comments,  Prev: expressions,  Up: language-structure

9.6 Comment Syntax
==================

MySQL Server supports three comment styles:

   * From a ``#'' character to the end of the line.

   * From a ``-- '' sequence to the end of the line. In MySQL, the ``--
     '' (double-dash) comment style requires the second dash to be
     followed by at least one whitespace or control character (such as
     a space, tab, newline, and so on). This syntax differs slightly
     from standard SQL comment syntax, as discussed in *Note
     ansi-diff-comments::.

   * From a `/*' sequence to the following `*/' sequence, as in the C
     programming language. This syntax enables a comment to extend over
     multiple lines because the beginning and closing sequences need
     not be on the same line.

The following example demonstrates all three comment styles:

     mysql> SELECT 1+1;     # This comment continues to the end of line
     mysql> SELECT 1+1;     -- This comment continues to the end of line
     mysql> SELECT 1 /* this is an in-line comment */ + 1;
     mysql> SELECT 1+
     /*
     this is a
     multiple-line comment
     */
     1;

Nested comments are not supported. (Under some conditions, nested
comments might be permitted, but usually are not, and users should
avoid them.)

MySQL Server supports some variants of C-style comments. These enable
you to write code that includes MySQL extensions, but is still
portable, by using comments of the following form:

     /*! MYSQL-SPECIFIC CODE */

In this case, MySQL Server parses and executes the code within the
comment as it would any other SQL statement, but other SQL servers will
ignore the extensions. For example, MySQL Server recognizes the
`STRAIGHT_JOIN' keyword in the following statement, but other servers
will not:

     SELECT /*! STRAIGHT_JOIN */ col1 FROM table1,table2 WHERE ...

If you add a version number after the ``!'' character, the syntax within
the comment is executed only if the MySQL version is greater than or
equal to the specified version number. The `TEMPORARY' keyword in the
following comment is executed only by servers from MySQL 3.23.02 or
higher:

     CREATE /*!32302 TEMPORARY */ TABLE t (a INT);

The comment syntax just described applies to how the *Note `mysqld':
mysqld. server parses SQL statements. The *Note `mysql': mysql. client
program also performs some parsing of statements before sending them to
the server. (It does this to determine statement boundaries within a
multiple-statement input line.)

Comments in this format, `/*!12345 ... */', are not stored on the
server. If this format is used to comment stored routines, the comments
will not be retained on the server.

The use of short-form *Note `mysql': mysql. commands such as `\C'
within multi-line `/* ...  */' comments is not supported.


File: manual.info,  Node: globalization,  Next: data-types,  Prev: language-structure,  Up: Top

10 Globalization
****************

* Menu:

* charset::                      Character Set Support
* error-message-language::       Setting the Error Message Language
* adding-character-set::         Adding a Character Set
* adding-collation::             Adding a Collation to a Character Set
* charset-configuration::        Character Set Configuration
* time-zone-support::            MySQL Server Time Zone Support
* locale-support::               MySQL Server Locale Support

This chapter covers issues of globalization, which includes
internationalization (MySQL's capabilities for adapting to local use)
and localization (selecting particular local conventions):

   * MySQL support for character sets in SQL statements.

   * How to configure the server to support different character sets.

   * Selecting the language for error messages.

   * How to set the server's time zone and enable per-connection time
     zone support.

   * Selecting the locale for day and month names.


File: manual.info,  Node: charset,  Next: error-message-language,  Prev: globalization,  Up: globalization

10.1 Character Set Support
==========================

* Menu:

* charset-general::              Character Sets and Collations in General
* charset-mysql::                Character Sets and Collations in MySQL
* charset-syntax::               Specifying Character Sets and Collations
* charset-connection::           Connection Character Sets and Collations
* charset-applications::         Configuring the Character Set and Collation for Applications
* charset-errors::               Character Set for Error Messages
* charset-collations::           Collation Issues
* charset-repertoire::           String Repertoire
* charset-operations::           Operations Affected by Character Set Support
* charset-unicode::              Unicode Support
* charset-unicode-upgrading::    Upgrading from Previous to Current Unicode Support
* charset-metadata::             UTF-8 for Metadata
* charset-conversion::           Column Character Set Conversion
* charset-charsets::             Character Sets and Collations That MySQL Supports

MySQL includes character set support that enables you to store data
using a variety of character sets and perform comparisons according to
a variety of collations. You can specify character sets at the server,
database, table, and column level. MySQL supports the use of character
sets for the `MyISAM', `MEMORY', *Note `NDBCLUSTER': mysql-cluster, and
`InnoDB' storage engines.

This chapter discusses the following topics:

   * What are character sets and collations?

   * The multiple-level default system for character set assignment.

   * Syntax for specifying character sets and collations.

   * Affected functions and operations.

   * Unicode support.

   * The character sets and collations that are available, with notes.

Character set issues affect not only data storage, but also
communication between client programs and the MySQL server. If you want
the client program to communicate with the server using a character set
different from the default, you'll need to indicate which one. For
example, to use the `utf8' Unicode character set, issue this statement
after connecting to the server:

     SET NAMES 'utf8';

For more information about configuring character sets for application
use and character set-related issues in client/server communication,
see *Note charset-applications::, and *Note charset-connection::.


File: manual.info,  Node: charset-general,  Next: charset-mysql,  Prev: charset,  Up: charset

10.1.1 Character Sets and Collations in General
-----------------------------------------------

A _character set_ is a set of symbols and encodings. A _collation_ is a
set of rules for comparing characters in a character set. Let's make the
distinction clear with an example of an imaginary character set.

Suppose that we have an alphabet with four letters: ``A'', ``B'', ``a'',
``b''. We give each letter a number: ``A'' = 0, ``B'' = 1, ``a'' = 2,
``b'' = 3. The letter ``A'' is a symbol, the number 0 is the *encoding*
for ``A'', and the combination of all four letters and their encodings
is a *character set*.

Suppose that we want to compare two string values, ``A'' and ``B''. The
simplest way to do this is to look at the encodings: 0 for ``A'' and 1
for ``B''. Because 0 is less than 1, we say ``A'' is less than ``B''.
What we've just done is apply a collation to our character set. The
collation is a set of rules (only one rule in this case): `compare the
encodings.' We call this simplest of all possible collations a _binary_
collation.

But what if we want to say that the lowercase and uppercase letters are
equivalent? Then we would have at least two rules: (1) treat the
lowercase letters ``a'' and ``b'' as equivalent to ``A'' and ``B''; (2)
then compare the encodings. We call this a _case-insensitive_
collation. It is a little more complex than a binary collation.

In real life, most character sets have many characters: not just ``A''
and ``B'' but whole alphabets, sometimes multiple alphabets or eastern
writing systems with thousands of characters, along with many special
symbols and punctuation marks. Also in real life, most collations have
many rules, not just for whether to distinguish lettercase, but also
for whether to distinguish accents (an `accent' is a mark attached to a
character as in German ``O"''), and for multiple-character mappings
(such as the rule that ``O"'' = ``OE'' in one of the two German
collations).

MySQL can do these things for you:

   * Store strings using a variety of character sets.

   * Compare strings using a variety of collations.

   * Mix strings with different character sets or collations in the
     same server, the same database, or even the same table.

   * Enable specification of character set and collation at any level.

In these respects, MySQL is far ahead of most other database management
systems. However, to use these features effectively, you need to know
what character sets and collations are available, how to change the
defaults, and how they affect the behavior of string operators and
functions.


File: manual.info,  Node: charset-mysql,  Next: charset-syntax,  Prev: charset-general,  Up: charset

10.1.2 Character Sets and Collations in MySQL
---------------------------------------------

The MySQL server can support multiple character sets. To list the
available character sets, use the *Note `SHOW CHARACTER SET':
show-character-set. statement. A partial listing follows.  For more
complete information, see *Note charset-charsets::.

     mysql> SHOW CHARACTER SET;
     +----------+-----------------------------+---------------------+--------+
     | Charset  | Description                 | Default collation   | Maxlen |
     +----------+-----------------------------+---------------------+--------+
     | big5     | Big5 Traditional Chinese    | big5_chinese_ci     |      2 |
     | dec8     | DEC West European           | dec8_swedish_ci     |      1 |
     | cp850    | DOS West European           | cp850_general_ci    |      1 |
     | hp8      | HP West European            | hp8_english_ci      |      1 |
     | koi8r    | KOI8-R Relcom Russian       | koi8r_general_ci    |      1 |
     | latin1   | cp1252 West European        | latin1_swedish_ci   |      1 |
     | latin2   | ISO 8859-2 Central European | latin2_general_ci   |      1 |
     | swe7     | 7bit Swedish                | swe7_swedish_ci     |      1 |
     | ascii    | US ASCII                    | ascii_general_ci    |      1 |
     | ujis     | EUC-JP Japanese             | ujis_japanese_ci    |      3 |
     | sjis     | Shift-JIS Japanese          | sjis_japanese_ci    |      2 |
     | hebrew   | ISO 8859-8 Hebrew           | hebrew_general_ci   |      1 |
     | tis620   | TIS620 Thai                 | tis620_thai_ci      |      1 |
     | euckr    | EUC-KR Korean               | euckr_korean_ci     |      2 |
     | koi8u    | KOI8-U Ukrainian            | koi8u_general_ci    |      1 |
     | gb2312   | GB2312 Simplified Chinese   | gb2312_chinese_ci   |      2 |
     | greek    | ISO 8859-7 Greek            | greek_general_ci    |      1 |
     | cp1250   | Windows Central European    | cp1250_general_ci   |      1 |
     | gbk      | GBK Simplified Chinese      | gbk_chinese_ci      |      2 |
     | latin5   | ISO 8859-9 Turkish          | latin5_turkish_ci   |      1 |
     ...

Any given character set always has at least one collation. It may have
several collations. To list the collations for a character set, use the
*Note `SHOW COLLATION': show-collation. statement. For example, to see
the collations for the `latin1' (cp1252 West European) character set,
use this statement to find those collation names that begin with
`latin1':

     mysql> SHOW COLLATION LIKE 'latin1%';
     +---------------------+---------+----+---------+----------+---------+
     | Collation           | Charset | Id | Default | Compiled | Sortlen |
     +---------------------+---------+----+---------+----------+---------+
     | latin1_german1_ci   | latin1  |  5 |         |          |       0 |
     | latin1_swedish_ci   | latin1  |  8 | Yes     | Yes      |       1 |
     | latin1_danish_ci    | latin1  | 15 |         |          |       0 |
     | latin1_german2_ci   | latin1  | 31 |         | Yes      |       2 |
     | latin1_bin          | latin1  | 47 |         | Yes      |       1 |
     | latin1_general_ci   | latin1  | 48 |         |          |       0 |
     | latin1_general_cs   | latin1  | 49 |         |          |       0 |
     | latin1_spanish_ci   | latin1  | 94 |         |          |       0 |
     +---------------------+---------+----+---------+----------+---------+

The `latin1' collations have the following meanings.

This table lists `latin1' character set collations, as described in the
example above, and provides the meaning of each collation.

Collation                     Meaning
`latin1_german1_ci'           German DIN-1
`latin1_swedish_ci'           Swedish/Finnish
`latin1_danish_ci'            Danish/Norwegian
`latin1_german2_ci'           German DIN-2
`latin1_bin'                  Binary according to `latin1' encoding
`latin1_general_ci'           Multilingual (Western European)
`latin1_general_cs'           Multilingual (ISO Western European), case
                              sensitive
`latin1_spanish_ci'           Modern Spanish

Collations have these general characteristics:

   * Two different character sets cannot have the same collation.

   * Each character set has one collation that is the _default
     collation_. For example, the default collation for `latin1' is
     `latin1_swedish_ci'. The output for *Note `SHOW CHARACTER SET':
     show-character-set. indicates which collation is the default for
     each displayed character set.

   * There is a convention for collation names: They start with the
     name of the character set with which they are associated, they
     usually include a language name, and they end with `_ci' (case
     insensitive), `_cs' (case sensitive), or `_bin' (binary).

In cases where a character set has multiple collations, it might not be
clear which collation is most suitable for a given application. To
avoid choosing the wrong collation, it can be helpful to perform some
comparisons with representative data values to make sure that a given
collation sorts values the way you expect.

Collation-Charts.Org (http://www.collation-charts.org/) is a useful
site for information that shows how one collation compares to another.


File: manual.info,  Node: charset-syntax,  Next: charset-connection,  Prev: charset-mysql,  Up: charset

10.1.3 Specifying Character Sets and Collations
-----------------------------------------------

* Menu:

* charset-server::               Server Character Set and Collation
* charset-database::             Database Character Set and Collation
* charset-table::                Table Character Set and Collation
* charset-column::               Column Character Set and Collation
* charset-literal::              Character String Literal Character Set and Collation
* charset-national::             National Character Set
* charset-examples::             Examples of Character Set and Collation Assignment
* charset-compatibility::        Compatibility with Other DBMSs

There are default settings for character sets and collations at four
levels: server, database, table, and column. The description in the
following sections may appear complex, but it has been found in
practice that multiple-level defaulting leads to natural and obvious
results.

`CHARACTER SET' is used in clauses that specify a character set.
`CHARSET' can be used as a synonym for `CHARACTER SET'.

Character set issues affect not only data storage, but also
communication between client programs and the MySQL server. If you want
the client program to communicate with the server using a character set
different from the default, you'll need to indicate which one. For
example, to use the `utf8' Unicode character set, issue this statement
after connecting to the server:

     SET NAMES 'utf8';

For more information about character set-related issues in
client/server communication, see *Note charset-connection::.


File: manual.info,  Node: charset-server,  Next: charset-database,  Prev: charset-syntax,  Up: charset-syntax

10.1.3.1 Server Character Set and Collation
...........................................

MySQL Server has a server character set and a server collation. These
can be set at server startup on the command line or in an option file
and changed at runtime.

Initially, the server character set and collation depend on the options
that you use when you start *Note `mysqld': mysqld. You can use
`--character-set-server' for the character set. Along with it, you can
add `--collation-server' for the collation. If you don't specify a
character set, that is the same as saying
`--character-set-server=latin1'.  If you specify only a character set
(for example, `latin1') but not a collation, that is the same as saying
`--character-set-server=latin1' `--collation-server=latin1_swedish_ci'
because `latin1_swedish_ci' is the default collation for `latin1'.
Therefore, the following three commands all have the same effect:

     shell> mysqld
     shell> mysqld --character-set-server=latin1
     shell> mysqld --character-set-server=latin1 \
                --collation-server=latin1_swedish_ci

One way to change the settings is by recompiling. To change the default
server character set and collation when building from sources, use the
`DEFAULT_CHARSET' and `DEFAULT_COLLATION' options for `CMake'. For
example:

     shell> cmake . -DDEFAULT_CHARSET=latin1

Or:

     shell> cmake . -DDEFAULT_CHARSET=latin1 \
                -DDEFAULT_COLLATION=latin1_german1_ci

Both *Note `mysqld': mysqld. and `CMake' verify that the character
set/collation combination is valid.  If not, each program displays an
error message and terminates.

The server character set and collation are used as default values if
the database character set and collation are not specified in *Note
`CREATE DATABASE': create-database.  statements. They have no other
purpose.

The current server character set and collation can be determined from
the values of the `character_set_server' and `collation_server' system
variables. These variables can be changed at runtime.


File: manual.info,  Node: charset-database,  Next: charset-table,  Prev: charset-server,  Up: charset-syntax

10.1.3.2 Database Character Set and Collation
.............................................

Every database has a database character set and a database collation.
The *Note `CREATE DATABASE': create-database.  and *Note `ALTER
DATABASE': alter-database. statements have optional clauses for
specifying the database character set and collation:

     CREATE DATABASE DB_NAME
         [[DEFAULT] CHARACTER SET CHARSET_NAME]
         [[DEFAULT] COLLATE COLLATION_NAME]

     ALTER DATABASE DB_NAME
         [[DEFAULT] CHARACTER SET CHARSET_NAME]
         [[DEFAULT] COLLATE COLLATION_NAME]

The keyword `SCHEMA' can be used instead of `DATABASE'.

All database options are stored in a text file named `db.opt' that can
be found in the database directory.

The `CHARACTER SET' and `COLLATE' clauses make it possible to create
databases with different character sets and collations on the same
MySQL server.

Example:

     CREATE DATABASE DB_NAME CHARACTER SET latin1 COLLATE latin1_swedish_ci;

MySQL chooses the database character set and database collation in the
following manner:

   * If both `CHARACTER SET X' and `COLLATE Y' are specified, character
     set X and collation Y are used.

   * If `CHARACTER SET X' is specified without `COLLATE', character set
     X and its default collation are used. To see the default collation
     for each character set, use the *Note `SHOW COLLATION':
     show-collation.  statement.

   * If `COLLATE Y' is specified without `CHARACTER SET', the character
     set associated with Y and collation Y are used.

   * Otherwise, the server character set and server collation are used.

The database character set and collation are used as default values for
table definitions if the table character set and collation are not
specified in *Note `CREATE TABLE': create-table. statements. The
database character set also is used by *Note `LOAD DATA INFILE':
load-data. The character set and collation have no other purposes.

The character set and collation for the default database can be
determined from the values of the `character_set_database' and
`collation_database' system variables. The server sets these variables
whenever the default database changes. If there is no default database,
the variables have the same value as the corresponding server-level
system variables, `character_set_server' and `collation_server'.


File: manual.info,  Node: charset-table,  Next: charset-column,  Prev: charset-database,  Up: charset-syntax

10.1.3.3 Table Character Set and Collation
..........................................

Every table has a table character set and a table collation.  The *Note
`CREATE TABLE': create-table. and *Note `ALTER TABLE': alter-table.
statements have optional clauses for specifying the table character set
and collation:

     CREATE TABLE TBL_NAME (COLUMN_LIST)
         [[DEFAULT] CHARACTER SET CHARSET_NAME]
         [COLLATE COLLATION_NAME]]

     ALTER TABLE TBL_NAME
         [[DEFAULT] CHARACTER SET CHARSET_NAME]
         [COLLATE COLLATION_NAME]

Example:

     CREATE TABLE t1 ( ... )
     CHARACTER SET latin1 COLLATE latin1_danish_ci;

MySQL chooses the table character set and collation in the following
manner:

   * If both `CHARACTER SET X' and `COLLATE Y' are specified, character
     set X and collation Y are used.

   * If `CHARACTER SET X' is specified without `COLLATE', character set
     X and its default collation are used. To see the default collation
     for each character set, use the *Note `SHOW COLLATION':
     show-collation.  statement.

   * If `COLLATE Y' is specified without `CHARACTER SET', the character
     set associated with Y and collation Y are used.

   * Otherwise, the database character set and collation are used.

The table character set and collation are used as default values for
column definitions if the column character set and collation are not
specified in individual column definitions.  The table character set
and collation are MySQL extensions; there are no such things in
standard SQL.


File: manual.info,  Node: charset-column,  Next: charset-literal,  Prev: charset-table,  Up: charset-syntax

10.1.3.4 Column Character Set and Collation
...........................................

Every `character' column (that is, a column of type *Note `CHAR': char,
*Note `VARCHAR': char, or *Note `TEXT': blob.) has a column character
set and a column collation. Column definition syntax for *Note `CREATE
TABLE': create-table. and *Note `ALTER TABLE': alter-table. has optional
clauses for specifying the column character set and collation:

     COL_NAME {CHAR | VARCHAR | TEXT} (COL_LENGTH)
         [CHARACTER SET CHARSET_NAME]
         [COLLATE COLLATION_NAME]

These clauses can also be used for *Note `ENUM': enum. and *Note `SET':
set. columns:

     COL_NAME {ENUM | SET} (VAL_LIST)
         [CHARACTER SET CHARSET_NAME]
         [COLLATE COLLATION_NAME]

Examples:

     CREATE TABLE t1
     (
         col1 VARCHAR(5)
           CHARACTER SET latin1
           COLLATE latin1_german1_ci
     );

     ALTER TABLE t1 MODIFY
         col1 VARCHAR(5)
           CHARACTER SET latin1
           COLLATE latin1_swedish_ci;

MySQL chooses the column character set and collation in the following
manner:

   * If both `CHARACTER SET X' and `COLLATE Y' are specified, character
     set X and collation Y are used.

          CREATE TABLE t1
          (
              col1 CHAR(10) CHARACTER SET utf8 COLLATE utf8_unicode_ci
          ) CHARACTER SET latin1 COLLATE latin1_bin;

     The character set and collation are specified for the column, so
     they are used. The column has character set `utf8' and collation
     `utf8_unicode_ci'.

   * If `CHARACTER SET X' is specified without `COLLATE', character set
     X and its default collation are used.

          CREATE TABLE t1
          (
              col1 CHAR(10) CHARACTER SET utf8
          ) CHARACTER SET latin1 COLLATE latin1_bin;

     The character set is specified for the column, but the collation
     is not. The column has character set `utf8' and the default
     collation for `utf8', which is `utf8_general_ci'. To see the
     default collation for each character set, use the *Note `SHOW
     COLLATION': show-collation. statement.

   * If `COLLATE Y' is specified without `CHARACTER SET', the character
     set associated with Y and collation Y are used.

          CREATE TABLE t1
          (
              col1 CHAR(10) COLLATE utf8_polish_ci
          ) CHARACTER SET latin1 COLLATE latin1_bin;

     The collation is specified for the column, but the character set
     is not. The column has collation `utf8_polish_ci' and the
     character set is the one associated with the collation, which is
     `utf8'.

   * Otherwise, the table character set and collation are used.

          CREATE TABLE t1
          (
              col1 CHAR(10)
          ) CHARACTER SET latin1 COLLATE latin1_bin;

     Neither the character set nor collation are specified for the
     column, so the table defaults are used. The column has character
     set `latin1' and collation `latin1_bin'.

The `CHARACTER SET' and `COLLATE' clauses are standard SQL.

If you use *Note `ALTER TABLE': alter-table. to convert a column from
one character set to another, MySQL attempts to map the data values,
but if the character sets are incompatible, there may be data loss.


File: manual.info,  Node: charset-literal,  Next: charset-national,  Prev: charset-column,  Up: charset-syntax

10.1.3.5 Character String Literal Character Set and Collation
.............................................................

Every character string literal has a character set and a collation.

A character string literal may have an optional character set
introducer and `COLLATE' clause:

     [_CHARSET_NAME]'STRING' [COLLATE COLLATION_NAME]

Examples:

     SELECT 'STRING';
     SELECT _latin1'STRING';
     SELECT _latin1'STRING' COLLATE latin1_danish_ci;

For the simple statement `SELECT 'STRING'', the string has the
character set and collation defined by the `character_set_connection'
and `collation_connection' system variables.

The `_CHARSET_NAME' expression is formally called an _introducer_. It
tells the parser, `the string that is about to follow uses character set
X.' Because this has confused people in the past, we emphasize that an
introducer does not change the string to the introducer character set
like `CONVERT()' would do. It does not change the string's value,
although padding may occur. The introducer is just a signal. An
introducer is also legal before standard hex literal and numeric hex
literal notation (`x'LITERAL'' and `0xNNNN'), or before bit-field
literal notation (`b'LITERAL'' and `0bNNNN').

Examples:

     SELECT _latin1 x'AABBCC';
     SELECT _latin1 0xAABBCC;
     SELECT _latin1 b'1100011';
     SELECT _latin1 0b1100011;

MySQL determines a literal's character set and collation in the
following manner:

   * If both _X and `COLLATE Y' are specified, character set X and
     collation Y are used.

   * If _X is specified but `COLLATE' is not specified, character set X
     and its default collation are used. To see the default collation
     for each character set, use the *Note `SHOW COLLATION':
     show-collation.  statement.

   * Otherwise, the character set and collation given by the
     `character_set_connection' and `collation_connection' system
     variables are used.

Examples:

   * A string with `latin1' character set and `latin1_german1_ci'
     collation:

          SELECT _latin1'Mu"ller' COLLATE latin1_german1_ci;

   * A string with `latin1' character set and its default collation
     (that is, `latin1_swedish_ci'):

          SELECT _latin1'Mu"ller';

   * A string with the connection default character set and collation:

          SELECT 'Mu"ller';

Character set introducers and the `COLLATE' clause are implemented
according to standard SQL specifications.

An introducer indicates the character set for the following string, but
does not change now how the parser performs escape processing within
the string. Escapes are always interpreted by the parser according to
the character set given by `character_set_connection'.

The following examples show that escape processing occurs using
`character_set_connection' even in the presence of an introducer. The
examples use `SET NAMES' (which changes `character_set_connection', as
discussed in *Note charset-connection::), and display the resulting
strings using the `HEX()' function so that the exact string contents
can be seen.

Example 1:

     mysql> SET NAMES latin1;
     Query OK, 0 rows affected (0.01 sec)

     mysql> SELECT HEX('a`\n'), HEX(_sjis'a`\n');
     +------------+-----------------+
     | HEX('a`\n') | HEX(_sjis'a`\n') |
     +------------+-----------------+
     | E00A       | E00A            |
     +------------+-----------------+
     1 row in set (0.00 sec)

Here, ``a`'' (hex value `E0') is followed by ``\n'', the escape
sequence for newline. The escape sequence is interpreted using the
`character_set_connection' value of `latin1' to produce a literal
newline (hex value `0A'). This happens even for the second string. That
is, the introducer of `_sjis' does not affect the parser's escape
processing.

Example 2:

     mysql> SET NAMES sjis;
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT HEX('a`\n'), HEX(_latin1'a`\n');
     +------------+-------------------+
     | HEX('a`\n') | HEX(_latin1'a`\n') |
     +------------+-------------------+
     | E05C6E     | E05C6E            |
     +------------+-------------------+
     1 row in set (0.04 sec)

Here, `character_set_connection' is `sjis', a character set in which
the sequence of ``a`'' followed by ``\'' (hex values `05' and `5C') is
a valid multi-byte character. Hence, the first two bytes of the string
are interpreted as a single `sjis' character, and the ``\'' is not
interpreted as an escape character. The following ``n'' (hex value
`6E') is not interpreted as part of an escape sequence. This is true
even for the second string; the introducer of `_latin1' does not affect
escape processing.


File: manual.info,  Node: charset-national,  Next: charset-examples,  Prev: charset-literal,  Up: charset-syntax

10.1.3.6 National Character Set
...............................

Standard SQL defines *Note `NCHAR': char. or *Note `NATIONAL CHAR':
char. as a way to indicate that a *Note `CHAR': char. column should use
some predefined character set. MySQL 5.5 uses `utf8' as this predefined
character set. For example, these data type declarations are equivalent:

     CHAR(10) CHARACTER SET utf8
     NATIONAL CHARACTER(10)
     NCHAR(10)

As are these:

     VARCHAR(10) CHARACTER SET utf8
     NATIONAL VARCHAR(10)
     NCHAR VARCHAR(10)
     NATIONAL CHARACTER VARYING(10)
     NATIONAL CHAR VARYING(10)

You can use `N'LITERAL'' (or `n'LITERAL'') to create a string in the
national character set. These statements are equivalent:

     SELECT N'some text';
     SELECT n'some text';
     SELECT _utf8'some text';

For information on upgrading character sets to MySQL 5.5 from versions
prior to 4.1, see the `MySQL 3.23, 4.0, 4.1 Reference Manual'.


File: manual.info,  Node: charset-examples,  Next: charset-compatibility,  Prev: charset-national,  Up: charset-syntax

10.1.3.7 Examples of Character Set and Collation Assignment
...........................................................

The following examples show how MySQL determines default character set
and collation values.

*Example 1: Table and Column Definition*

     CREATE TABLE t1
     (
         c1 CHAR(10) CHARACTER SET latin1 COLLATE latin1_german1_ci
     ) DEFAULT CHARACTER SET latin2 COLLATE latin2_bin;

Here we have a column with a `latin1' character set and a
`latin1_german1_ci' collation. The definition is explicit, so that is
straightforward. Notice that there is no problem with storing a
`latin1' column in a `latin2' table.

*Example 2: Table and Column Definition*

     CREATE TABLE t1
     (
         c1 CHAR(10) CHARACTER SET latin1
     ) DEFAULT CHARACTER SET latin1 COLLATE latin1_danish_ci;

This time we have a column with a `latin1' character set and a default
collation. Although it might seem natural, the default collation is not
taken from the table level. Instead, because the default collation for
`latin1' is always `latin1_swedish_ci', column `c1' has a collation of
`latin1_swedish_ci' (not `latin1_danish_ci').

*Example 3: Table and Column Definition*

     CREATE TABLE t1
     (
         c1 CHAR(10)
     ) DEFAULT CHARACTER SET latin1 COLLATE latin1_danish_ci;

We have a column with a default character set and a default collation.
In this circumstance, MySQL checks the table level to determine the
column character set and collation.  Consequently, the character set
for column `c1' is `latin1' and its collation is `latin1_danish_ci'.

*Example 4: Database, Table, and Column Definition*

     CREATE DATABASE d1
         DEFAULT CHARACTER SET latin2 COLLATE latin2_czech_ci;
     USE d1;
     CREATE TABLE t1
     (
         c1 CHAR(10)
     );

We create a column without specifying its character set and collation.
We're also not specifying a character set and a collation at the table
level. In this circumstance, MySQL checks the database level to
determine the table settings, which thereafter become the column
settings.) Consequently, the character set for column `c1' is `latin2'
and its collation is `latin2_czech_ci'.


File: manual.info,  Node: charset-compatibility,  Prev: charset-examples,  Up: charset-syntax

10.1.3.8 Compatibility with Other DBMSs
.......................................

For MaxDB compatibility these two statements are the same:

     CREATE TABLE t1 (f1 CHAR(N) UNICODE);
     CREATE TABLE t1 (f1 CHAR(N) CHARACTER SET ucs2);


File: manual.info,  Node: charset-connection,  Next: charset-applications,  Prev: charset-syntax,  Up: charset

10.1.4 Connection Character Sets and Collations
-----------------------------------------------

Several character set and collation system variables relate to a
client's interaction with the server. Some of these have been mentioned
in earlier sections:

   * The server character set and collation are the values of the
     `character_set_server' and `collation_server' system variables.

   * The character set and collation of the default database are the
     values of the `character_set_database' and `collation_database'
     system variables.

Additional character set and collation system variables are involved in
handling traffic for the connection between a client and the server.
Every client has connection-related character set and collation system
variables.

A `connection' is what you make when you connect to the server. The
client sends SQL statements, such as queries, over the connection to
the server. The server sends responses, such as result sets or error
messages, over the connection back to the client. This leads to several
questions about character set and collation handling for client
connections, each of which can be answered in terms of system variables:

   * What character set is the statement in when it leaves the client?

     The server takes the `character_set_client' system variable to be
     the character set in which statements are sent by the client.

   * What character set should the server translate a statement to
     after receiving it?

     For this, the server uses the `character_set_connection' and
     `collation_connection' system variables. It converts statements
     sent by the client from `character_set_client' to
     `character_set_connection' (except for string literals that have
     an introducer such as `_latin1' or `_utf8').
     `collation_connection' is important for comparisons of literal
     strings. For comparisons of strings with column values,
     `collation_connection' does not matter because columns have their
     own collation, which has a higher collation precedence.

   * What character set should the server translate to before shipping
     result sets or error messages back to the client?

     The `character_set_results' system variable indicates the
     character set in which the server returns query results to the
     client. This includes result data such as column values, and
     result metadata such as column names and error messages.

Clients can fine-tune the settings for these variables, or depend on
the defaults (in which case, you can skip the rest of this section). If
you do not use the defaults, you must change the character settings
_for each connection to the server._

Two statements affect the connection-related character set variables as
a group:

   * `SET NAMES 'CHARSET_NAME' [COLLATE 'COLLATION_NAME']'

     `SET NAMES' indicates what character set the client will use to
     send SQL statements to the server.  Thus, `SET NAMES 'cp1251''
     tells the server, `future incoming messages from this client are
     in character set `cp1251'.' It also specifies the character set
     that the server should use for sending results back to the client.
     (For example, it indicates what character set to use for column
     values if you use a *Note `SELECT': select. statement.)

     A `SET NAMES 'CHARSET_NAME'' statement is equivalent to these
     three statements:

          SET character_set_client = CHARSET_NAME;
          SET character_set_results = CHARSET_NAME;
          SET character_set_connection = CHARSET_NAME;

     Setting `character_set_connection' to CHARSET_NAME also implicitly
     sets `collation_connection' to the default collation for
     CHARSET_NAME. It is unnecessary to set that collation explicitly.
     To specify a particular collation, use the optional `COLLATE'
     clause:

          SET NAMES 'CHARSET_NAME' COLLATE 'COLLATION_NAME'

   * `SET CHARACTER SET CHARSET_NAME'

     `SET CHARACTER SET' is similar to `SET NAMES' but sets
     `character_set_connection' and `collation_connection' to
     `character_set_database' and `collation_database'. A `SET
     CHARACTER SET CHARSET_NAME' statement is equivalent to these three
     statements:

          SET character_set_client = CHARSET_NAME;
          SET character_set_results = CHARSET_NAME;
          SET collation_connection = @@collation_database;

     Setting `collation_connection' also implicitly sets
     `character_set_connection' to the character set associated with
     the collation (equivalent to executing `SET
     character_set_connection = @@character_set_database'). It is
     unnecessary to set `character_set_connection' explicitly.

*Note*:

`ucs2', `utf16', and `utf32' cannot be used as a client character set,
which means that they do not work for `SET NAMES' or `SET CHARACTER
SET'.

The MySQL client programs `mysql', `mysqladmin', `mysqlcheck',
`mysqlimport', and `mysqlshow' determine the default character set to
use as follows:

   * In the absence of other information, the programs use the
     compiled-in default character set, usually `latin1'.

   * The programs can autodetect which character set to use based on
     the operating system setting, such as the value of the `LANG' or
     `LC_ALL' locale environment variable on Unix systems or the code
     page setting on Windows systems. For systems on which the locale
     is available from the OS, the client uses it to set the default
     character set rather than using the compiled-in default. For
     example, setting `LANG' to `ru_RU.KOI8-R' causes the `koi8r'
     character set to be used. Thus, users can configure the locale in
     their environment for use by MySQL clients.

     The OS character set is mapped to the closest MySQL character set
     if there is no exact match. If the client does not support the
     matching character set, it uses the compiled-in default. For
     example, `ucs2' is not supported as a connection character set.

     C applications can use character set autodetection based on the OS
     setting by invoking *Note `mysql_options()': mysql-options. as
     follows before connecting to the server:

          mysql_options(mysql,
                        MYSQL_SET_CHARSET_NAME,
                        MYSQL_AUTODETECT_CHARSET_NAME);

   * The programs support a `--default-character-set' option, which
     enables users to specify the character set explicitly to override
     whatever default the client otherwise determines.

*Note*:

Before MySQL 5.5, in the absence of other information, the MySQL client
programs used the compiled-in default character set, usually `latin1'.
An implication of this difference is that if your environment is
configured to use a non-`latin1' locale, MySQL client programs will use
a different connection character set than previously, as though you had
issued an implicit *Note `SET NAMES': set-statement. statement. If the
previous behavior is required, start the client with the
`--default-character-set=latin1' option.

When a client connects to the server, it sends the name of the
character set that it wants to use. The server uses the name to set the
`character_set_client', `character_set_results', and
`character_set_connection' system variables. In effect, the server
performs a `SET NAMES' operation using the character set name.

With the *Note `mysql': mysql. client, to use a character set different
from the default, you could explicitly execute `SET NAMES' every time
you start up. To accomplish the same result more easily, add the
`--default-character-set' option setting to your *Note `mysql': mysql.
command line or in your option file. For example, the following option
file setting changes the three connection-related character set
variables set to `koi8r' each time you invoke *Note `mysql': mysql.:

     [mysql]
     default-character-set=koi8r

If you are using the *Note `mysql': mysql. client with auto-reconnect
enabled (which is not recommended), it is preferable to use the
`charset' command rather than `SET NAMES'. For example:

     mysql> charset utf8
     Charset changed

The `charset' command issues a `SET NAMES' statement, and also changes
the default character set that *Note `mysql': mysql. uses when it
reconnects after the connection has dropped.

Example: Suppose that `column1' is defined as `CHAR(5) CHARACTER SET
latin2'. If you do not say `SET NAMES' or `SET CHARACTER SET', then for
`SELECT column1 FROM t', the server sends back all the values for
`column1' using the character set that the client specified when it
connected. On the other hand, if you say `SET NAMES 'latin1'' or `SET
CHARACTER SET latin1' before issuing the *Note `SELECT': select.
statement, the server converts the `latin2' values to `latin1' just
before sending results back.  Conversion may be lossy if there are
characters that are not in both character sets.

If you want the server to perform no conversion of result sets or error
messages, set `character_set_results' to `NULL' or `binary':

     SET character_set_results = NULL;

To see the values of the character set and collation system variables
that apply to your connection, use these statements:

     SHOW VARIABLES LIKE 'character_set%';
     SHOW VARIABLES LIKE 'collation%';

You must also consider the environment within which your MySQL
applications execute. See *Note charset-applications::.

For more information about character sets and error messages, see *Note
charset-errors::.


File: manual.info,  Node: charset-applications,  Next: charset-errors,  Prev: charset-connection,  Up: charset

10.1.5 Configuring the Character Set and Collation for Applications
-------------------------------------------------------------------

For applications that store data using the default MySQL character set
and collation (`latin1', `latin1_swedish_ci'), no special configuration
should be needed. If applications require data storage using a
different character set or collation, you can configure character set
information several ways:

   * Specify character settings per database. For example, applications
     that use one database might require `utf8', whereas applications
     that use another database might require `sjis'.

   * Specify character settings at server startup. This causes the
     server to use the given settings for all applications that do not
     make other arrangements.

   * Specify character settings at configuration time, if you build
     MySQL from source. This causes the server to use the given
     settings for all applications, without having to specify them at
     server startup.

When different applications require different character settings, the
per-database technique provides a good deal of flexibility. If most or
all applications use the same character set, specifying character
settings at server startup or configuration time may be most convenient.

For the per-database or server-startup techniques, the settings control
the character set for data storage. Applications must also tell the
server which character set to use for client/server communications, as
described in the following instructions.

The examples shown here assume use of the `utf8' character set and
`utf8_general_ci' collation.

*Specify character settings per database.* To create a database such
that its tables will use a given default character set and collation
for data storage, use a *Note `CREATE DATABASE': create-database.
statement like this:

     CREATE DATABASE mydb
       DEFAULT CHARACTER SET utf8
       DEFAULT COLLATE utf8_general_ci;

Tables created in the database will use `utf8' and `utf8_general_ci' by
default for any character columns.

Applications that use the database should also configure their
connection to the server each time they connect. This can be done by
executing a `SET NAMES 'utf8'' statement after connecting. The
statement can be used regardless of connection method: The *Note
`mysql': mysql. client, PHP scripts, and so forth.

In some cases, it may be possible to configure the connection to use
the desired character set some other way. For example, for connections
made using *Note `mysql': mysql, you can specify the
`--default-character-set=utf8' command-line option to achieve the same
effect as `SET NAMES 'utf8''.

For more information about configuring client connections, see *Note
charset-connection::.

If you change the default character set or collation for a database,
stored routines that use the database defaults must be dropped and
recreated so that they use the new defaults. (In a stored routine,
variables with character data types use the database defaults if the
character set or collation are not specified explicitly. See *Note
create-procedure::.)

*Specify character settings at server startup.* To select a character
set and collation at server startup, use the `--character-set-server'
and `--collation-server' options. For example, to specify the options
in an option file, include these lines:

     [mysqld]
     character-set-server=utf8
     collation-server=utf8_general_ci

These settings apply server-wide and apply as the defaults for
databases created by any application, and for tables created in those
databases.

It is still necessary for applications to configure their connection
using `SET NAMES' or equivalent after they connect, as described
previously. You might be tempted to start the server with the
`--init_connect="SET NAMES 'utf8'"' option to cause `SET NAMES' to be
executed automatically for each client that connects. However, this will
yield inconsistent results because the `init_connect' value is not
executed for users who have the `SUPER' privilege.

*Specify character settings at MySQL configuration time.* To select a
character set and collation when you configure and build MySQL from
source, use the `DEFAULT_CHARSET' and `DEFAULT_COLLATION' options for
`CMake':

     shell> cmake . -DDEFAULT_CHARSET=utf8 \
                -DDEFAULT_COLLATION=utf8_general_ci

The resulting server uses `utf8' and `utf8_general_ci' as the default
for databases and tables and for client connections. It is unnecessary
to use `--character-set-server' and `--collation-server' to specify
those defaults at server startup. It is also unnecessary for
applications to configure their connection using `SET NAMES' or
equivalent after they connect to the server.

Regardless of how you configure the MySQL character set for application
use, you must also consider the environment within which those
applications execute. If you will send statements using UTF-8 text
taken from a file that you create in an editor, you should edit the
file with the locale of your environment set to UTF-8 so that the file
encoding is correct and so that the operating system handles it
correctly. If you use the *Note `mysql': mysql. client from within a
terminal window, the window must be configured to use UTF-8 or
characters may not display properly. For a script that executes in a Web
environment, the script must handle character encoding properly for its
interaction with the MySQL server, and it must generate pages that
correctly indicate the encoding so that browsers know how to display
the content of the pages. For example, you can include this `<meta>'
tag within your `<head>' element:

     <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />


File: manual.info,  Node: charset-errors,  Next: charset-collations,  Prev: charset-applications,  Up: charset

10.1.6 Character Set for Error Messages
---------------------------------------

This section describes how the server uses character sets for
constructing error messages and returning them to clients. For
information about the language of error messages (rather than the
character set), see *Note error-message-language::.

As of MySQL 5.5, the server constructs error messages using UTF-8 and
returns them to clients in the character set specified by the
`character_set_results' system variable.

The server constructs error messages as follows:

   * The message template uses UTF-8.

   * Parameters in the message template are replaced with values that
     apply to a specific error occurrence:

        * Identifiers such as table or column names use UTF-8
          internally so they are copied as is.

        * Character (nonbinary) string values are converted from their
          character set to UTF-8.

        * Binary string values are copied as is for bytes in the range
          `0x20' to `0x7E', and using `\x' hex encoding for bytes
          outside that range. For example, if a duplicate-key error
          occurs for an attempt to insert `0x41CF9F' into a *Note
          `VARBINARY': binary-varbinary. unique column, the resulting
          error message uses UTF-8 with some bytes hex encoded:

               Duplicate entry 'A\xC3\x9F' for key 1

To return a message to the client after it has been constructed, the
server converts it from UTF-8 to the character set specified by the
`character_set_results' system variable. If `character_set_results' has
a value of `NULL' or `binary', no conversion occurs. No conversion
occurs if the variable value is `utf8', either, because that matches the
original error message character set.

For characters that cannot be represented in `character_set_results',
some encoding may occur during the conversion. The encoding uses
Unicode code point values:

   * Characters in the Basic Multilingual Plane (BMP) range (`0x0000'
     to `0xFFFF') are written using `\NNNN' notation.

   * Characters outside the BMP range (`0x01000' to `0x10FFFF') are
     written using `\+NNNNNN' notation.

Clients can set `character_set_results' to control the character set in
which they receive error messages.  The variable can be set directly,
or indirectly by means such as *Note `SET NAMES': set-statement. For
more information about `character_set_results', see *Note
charset-connection::.

Prior to MySQL 5.5, the server constructs error messages and returns
them to clients as follows:

   * The message template has the character set associated with the
     error message language. For example, English, Korean, and Russian
     messages use `latin1', `euckr', and `koi8r', respectively.

   * Parameters in the message template are replaced with values that
     apply to a specific error occurrence. These parameters use their
     own character set. Identifiers such as table or column names use
     UTF-8. Data values retain their character set. For example, in the
     following duplicate-key message, `'XXX'' has the character set of
     the table column associated with key 1:

          Duplicate entry 'XXX' for key1

The preceding method of error-message construction can result in
messages that contain a mix of character sets unless all items involved
contain only ASCII characters.

For MySQL 5.5 and higher, the encoding that occurs during the
conversion to `character_set_results' before returning error messages
to clients can result in different message content compared to earlier
versions. For example, if an error occurs for an attempt to drop a
table named `ペ' (KATAKANA LETTER PE) and `character_set_results' is a
character set such as `latin1' that does not contain that character,
the resulting message sent to the client has an encoded table name:

     ERROR 1051 (42S02): Unknown table '\30DA'

Before MySQL 5.5, the name is not encoded:

     ERROR 1051 (42S02): Unknown table 'ペ'


File: manual.info,  Node: charset-collations,  Next: charset-repertoire,  Prev: charset-errors,  Up: charset

10.1.7 Collation Issues
-----------------------

* Menu:

* charset-collation-names::      Collation Names
* charset-collate::              Using `COLLATE' in SQL Statements
* charset-collate-precedence::   `COLLATE' Clause Precedence
* charset-collation-charset::    Collations Must Be for the Right Character Set
* charset-collation-expressions::  Collation of Expressions
* charset-binary-collations::    The `_bin' and `binary' Collations
* charset-binary-op::            The `BINARY' Operator
* charset-collation-effect::     Examples of the Effect of Collation
* charset-collation-information-schema::  Collation and `INFORMATION_SCHEMA' Searches

The following sections discuss various aspects of character set
collations.


File: manual.info,  Node: charset-collation-names,  Next: charset-collate,  Prev: charset-collations,  Up: charset-collations

10.1.7.1 Collation Names
........................

MySQL collation names follow these rules:

   * A name ending in `_ci' indicates a case-insensitive collation.

   * A name ending in `_cs' indicates a case-sensitive collation.

   * A name ending in `_bin' indicates a binary collation. Character
     comparisons are based on character binary code values.


File: manual.info,  Node: charset-collate,  Next: charset-collate-precedence,  Prev: charset-collation-names,  Up: charset-collations

10.1.7.2 Using `COLLATE' in SQL Statements
..........................................

With the `COLLATE' clause, you can override whatever the default
collation is for a comparison.  `COLLATE' may be used in various parts
of SQL statements. Here are some examples:

   * With `ORDER BY':

          SELECT k
          FROM t1
          ORDER BY k COLLATE latin1_german2_ci;

   * With `AS':

          SELECT k COLLATE latin1_german2_ci AS k1
          FROM t1
          ORDER BY k1;

   * With `GROUP BY':

          SELECT k
          FROM t1
          GROUP BY k COLLATE latin1_german2_ci;

   * With aggregate functions:

          SELECT MAX(k COLLATE latin1_german2_ci)
          FROM t1;

   * With `DISTINCT':

          SELECT DISTINCT k COLLATE latin1_german2_ci
          FROM t1;

   * With `WHERE':

               SELECT *
               FROM t1
               WHERE _latin1 'Mu"ller' COLLATE latin1_german2_ci = k;

               SELECT *
               FROM t1
               WHERE k LIKE _latin1 'Mu"ller' COLLATE latin1_german2_ci;

   * With `HAVING':

          SELECT k
          FROM t1
          GROUP BY k
          HAVING k = _latin1 'Mu"ller' COLLATE latin1_german2_ci;


File: manual.info,  Node: charset-collate-precedence,  Next: charset-collation-charset,  Prev: charset-collate,  Up: charset-collations

10.1.7.3 `COLLATE' Clause Precedence
....................................

The `COLLATE' clause has high precedence (higher than `||'), so the
following two expressions are equivalent:

     x || y COLLATE z
     x || (y COLLATE z)


File: manual.info,  Node: charset-collation-charset,  Next: charset-collation-expressions,  Prev: charset-collate-precedence,  Up: charset-collations

10.1.7.4 Collations Must Be for the Right Character Set
.......................................................

Each character set has one or more collations, but each collation is
associated with one and only one character set.  Therefore, the
following statement causes an error message because the `latin2_bin'
collation is not legal with the `latin1' character set:

     mysql> SELECT _latin1 'x' COLLATE latin2_bin;
     ERROR 1253 (42000): COLLATION 'latin2_bin' is not valid
     for CHARACTER SET 'latin1'


File: manual.info,  Node: charset-collation-expressions,  Next: charset-binary-collations,  Prev: charset-collation-charset,  Up: charset-collations

10.1.7.5 Collation of Expressions
.................................

In the great majority of statements, it is obvious what collation MySQL
uses to resolve a comparison operation. For example, in the following
cases, it should be clear that the collation is the collation of column
`charset_name':

     SELECT x FROM T ORDER BY x;
     SELECT x FROM T WHERE x = x;
     SELECT DISTINCT x FROM T;

However, with multiple operands, there can be ambiguity. For example:

     SELECT x FROM T WHERE x = 'Y';

Should the comparison use the collation of the column `x', or of the
string literal `'Y''? Both `x' and `'Y'' have collations, so which
collation takes precedence?

Standard SQL resolves such questions using what used to be called
`coercibility' rules. MySQL assigns coercibility values as follows:

   * An explicit `COLLATE' clause has a coercibility of 0. (Not
     coercible at all.)

   * The concatenation of two strings with different collations has a
     coercibility of 1.

   * The collation of a column or a stored routine parameter or local
     variable has a coercibility of 2.

   * A `system constant' (the string returned by functions such as
     `USER()' or `VERSION()') has a coercibility of 3.

   * The collation of a literal has a coercibility of 4.

   * `NULL' or an expression that is derived from `NULL' has a
     coercibility of 5.

MySQL uses coercibility values with the following rules to resolve
ambiguities:

   * Use the collation with the lowest coercibility value.

   * If both sides have the same coercibility, then:

        * If both sides are Unicode, or both sides are not Unicode, it
          is an error.

        * If one of the sides has a Unicode character set, and another
          side has a non-Unicode character set, the side with Unicode
          character set wins, and automatic character set conversion is
          applied to the non-Unicode side. For example, the following
          statement does not return an error:

               SELECT CONCAT(utf8_column, latin1_column) FROM t1;

          It returns a result that has a character set of `utf8' and
          the same collation as `utf8_column'. Values of
          `latin1_column' are automatically converted to `utf8' before
          concatenating.

        * For an operation with operands from the same character set
          but that mix a `_bin' collation and a `_ci' or `_cs'
          collation, the `_bin' collation is used. This is similar to
          how operations that mix nonbinary and binary strings evaluate
          the operands as binary strings, except that it is for
          collations rather than data types.

Although automatic conversion is not in the SQL standard, the SQL
standard document does say that every character set is (in terms of
supported characters) a `subset' of Unicode. Because it is a well-known
principle that `what applies to a superset can apply to a subset,' we
believe that a collation for Unicode can apply for comparisons with
non-Unicode strings.

Examples:

This table lists comparisons and the collation used for each comparison.

Comparison                           Collation Used
`column1 = 'A''                      Use collation of `column1'
`column1 = 'A' COLLATE x'            Use collation of `'A' COLLATE x'
`column1 COLLATE x = 'A' COLLATE y'  Error

The `COERCIBILITY()' function can be used to determine the coercibility
of a string expression:

     mysql> SELECT COERCIBILITY('A' COLLATE latin1_swedish_ci);
             -> 0
     mysql> SELECT COERCIBILITY(VERSION());
             -> 3
     mysql> SELECT COERCIBILITY('A');
             -> 4

See *Note information-functions::.

For implicit conversion of a numeric or temporal value to a string,
such as occurs for the argument `1' in the expression `CONCAT(1,
'abc')', the result is a character (nonbinary) string that has a
character set and collation determined by the
`character_set_connection' and `collation_connection' system variables.
(Before MySQL 5.5.3, the result is a binary string for which the
character set and collation are `binary'). See *Note type-conversion::.


File: manual.info,  Node: charset-binary-collations,  Next: charset-binary-op,  Prev: charset-collation-expressions,  Up: charset-collations

10.1.7.6 The `_bin' and `binary' Collations
...........................................

This section describes how `_bin' collations for nonbinary strings
differ from the `binary' `collation' for binary strings.

Nonbinary strings (as stored in the *Note `CHAR': char, *Note
`VARCHAR': char, and *Note `TEXT': blob. data types) have a character
set and collation. A given character set can have several collations,
each of which defines a particular sorting and comparison order for the
characters in the set. One of these is the binary collation for the
character set, indicated by a `_bin' suffix in the collation name. For
example, `latin1' and `utf8' have binary collations named `latin1_bin'
and `utf8_bin'.

Binary strings (as stored in the *Note `BINARY': binary-varbinary,
*Note `VARBINARY': binary-varbinary, and *Note `BLOB': blob. data
types) have no character set or collation in the sense that nonbinary
strings do. (Applied to a binary string, the `CHARSET()' and
`COLLATION()' functions both return a value of `binary'.) Binary
strings are sequences of bytes and the numeric values of those bytes
determine sort order.

The `_bin' collations differ from the `binary' collation in several
respects.

*The unit for sorting and comparison.* Binary strings are sequences of
bytes.  Sorting and comparison is always based on numeric byte values.
Nonbinary strings are sequences of characters, which might be
multi-byte. Collations for nonbinary strings define an ordering of the
character values for sorting and comparison.  For the `_bin' collation,
this ordering is based solely on binary code values of the characters
(which is similar to ordering for binary strings except that a `_bin'
collation must take into account that a character might contain
multiple bytes). For other collations, character ordering might take
additional factors such as lettercase into account.

*Character set conversion.* A nonbinary string has a character set and
is converted to another character set in many cases, even when the
string has a `_bin' collation:

   * When assigning column values from another column that has a
     different character set:

          UPDATE t1 SET utf8_bin_column=latin1_column;
          INSERT INTO t1 (latin1_column) SELECT utf8_bin_column FROM t2;

   * When assigning column values for *Note `INSERT': insert. or *Note
     `UPDATE': update. using a string literal:

          SET NAMES latin1;
          INSERT INTO t1 (utf8_bin_column) VALUES ('string-in-latin1');

   * When sending results from the server to a client:

          SET NAMES latin1;
          SELECT utf8_bin_column FROM t2;

For binary string columns, no conversion occurs. For the preceding
cases, the string value is copied byte-wise.

*Lettercase conversion.* Collations provide information about
lettercase of characters, so characters in a nonbinary string can be
converted from one lettercase to another, even for `_bin' collations
that ignore lettercase for ordering:

     mysql> SET NAMES latin1 COLLATE latin1_bin;
     Query OK, 0 rows affected (0.02 sec)

     mysql> SELECT LOWER('aA'), UPPER('zZ');
     +-------------+-------------+
     | LOWER('aA') | UPPER('zZ') |
     +-------------+-------------+
     | aa          | ZZ          |
     +-------------+-------------+
     1 row in set (0.13 sec)

The concept of lettercase does not apply to bytes in a binary string.
To perform lettercase conversion, the string must be converted to a
nonbinary string:

     mysql> SET NAMES binary;
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT LOWER('aA'), LOWER(CONVERT('aA' USING latin1));
     +-------------+-----------------------------------+
     | LOWER('aA') | LOWER(CONVERT('aA' USING latin1)) |
     +-------------+-----------------------------------+
     | aA          | aa                                |
     +-------------+-----------------------------------+
     1 row in set (0.00 sec)

*Trailing space handling in comparisons.* Nonbinary strings have
`PADSPACE' behavior for all collations, including `_bin' collations.
Trailing spaces are insignificant in comparisons:

     mysql> SET NAMES utf8 COLLATE utf8_bin;
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT 'a ' = 'a';
     +------------+
     | 'a ' = 'a' |
     +------------+
     |          1 |
     +------------+
     1 row in set (0.00 sec)

For binary strings, all characters are significant in comparisons,
including trailing spaces:

     mysql> SET NAMES binary;
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT 'a ' = 'a';
     +------------+
     | 'a ' = 'a' |
     +------------+
     |          0 |
     +------------+
     1 row in set (0.00 sec)

*Trailing space handling for inserts and retrievals.* `CHAR(N)' columns
store nonbinary strings. Values shorter than N characters are extended
with spaces on insertion. For retrieval, trailing spaces are removed.

`BINARY(N)' columns store binary strings. Values shorter than N bytes
are extended with `0x00' bytes on insertion. For retrieval, nothing is
removed; a value of the declared length is always returned.

     mysql> CREATE TABLE t1 (
         ->   a CHAR(10) CHARACTER SET utf8 COLLATE utf8_bin,
         ->   b BINARY(10)
         -> );
     Query OK, 0 rows affected (0.09 sec)

     mysql> INSERT INTO t1 VALUES ('a','a');
     Query OK, 1 row affected (0.01 sec)

     mysql> SELECT HEX(a), HEX(b) FROM t1;
     +--------+----------------------+
     | HEX(a) | HEX(b)               |
     +--------+----------------------+
     | 61     | 61000000000000000000 |
     +--------+----------------------+
     1 row in set (0.04 sec)


File: manual.info,  Node: charset-binary-op,  Next: charset-collation-effect,  Prev: charset-binary-collations,  Up: charset-collations

10.1.7.7 The `BINARY' Operator
..............................

The `BINARY' operator casts the string following it to a binary string.
This is an easy way to force a comparison to be done byte by byte
rather than character by character. `BINARY' also causes trailing
spaces to be significant.

     mysql> SELECT 'a' = 'A';
             -> 1
     mysql> SELECT BINARY 'a' = 'A';
             -> 0
     mysql> SELECT 'a' = 'a ';
             -> 1
     mysql> SELECT BINARY 'a' = 'a ';
             -> 0

`BINARY STR' is shorthand for `CAST(STR AS BINARY)'.

The `BINARY' attribute in character column definitions has a different
effect. A character column defined with the `BINARY' attribute is
assigned the binary collation of the column character set. Every
character set has a binary collation. For example, the binary collation
for the `latin1' character set is `latin1_bin', so if the table default
character set is `latin1', these two column definitions are equivalent:

     CHAR(10) BINARY
     CHAR(10) CHARACTER SET latin1 COLLATE latin1_bin

The effect of `BINARY' as a column attribute differs from its effect
prior to MySQL 4.1. Formerly, `BINARY' resulted in a column that was
treated as a binary string. A binary string is a string of bytes that
has no character set or collation, which differs from a nonbinary
character string that has a binary collation.  For both types of
strings, comparisons are based on the numeric values of the string
unit, but for nonbinary strings the unit is the character and some
character sets support multi-byte characters. *Note binary-varbinary::.

The use of `CHARACTER SET binary' in the definition of a *Note `CHAR':
char, *Note `VARCHAR': char, or *Note `TEXT': blob. column causes the
column to be treated as a binary data type. For example, the following
pairs of definitions are equivalent:

     CHAR(10) CHARACTER SET binary
     BINARY(10)

     VARCHAR(10) CHARACTER SET binary
     VARBINARY(10)

     TEXT CHARACTER SET binary
     BLOB


File: manual.info,  Node: charset-collation-effect,  Next: charset-collation-information-schema,  Prev: charset-binary-op,  Up: charset-collations

10.1.7.8 Examples of the Effect of Collation
............................................

*Example 1: Sorting German Umlauts*

Suppose that column `X' in table `T' has these `latin1' column values:

     Muffler
     Mu"ller
     MX Systems
     MySQL

Suppose also that the column values are retrieved using the following
statement:

     SELECT X FROM T ORDER BY X COLLATE COLLATION_NAME;

The following table shows the resulting order of the values if we use
`ORDER BY' with different collations.

This table illustrates an example of the effect of collation, as
described in the preceding text. The table shows the resulting order of
values for three collations (`latin1_swedish_ci', `latin1_german1_ci',
`latin1_german2_ci') when using `ORDER BY'.

`latin1_swedish_ci'    `latin1_german1_ci'    `latin1_german2_ci'
Muffler                Muffler                Mu"ller
MX Systems             Mu"ller                Muffler
Mu"ller                MX Systems             MX Systems
MySQL                  MySQL                  MySQL

The character that causes the different sort orders in this example is
the U with two dots over it (`u"'), which the Germans call `U-umlaut.'

   * The first column shows the result of the *Note `SELECT': select.
     using the Swedish/Finnish collating rule, which says that U-umlaut
     sorts with Y.

   * The second column shows the result of the *Note `SELECT': select.
     using the German DIN-1 rule, which says that U-umlaut sorts with U.

   * The third column shows the result of the *Note `SELECT': select.
     using the German DIN-2 rule, which says that U-umlaut sorts with
     UE.

*Example 2: Searching for German Umlauts*

Suppose that you have three tables that differ only by the character
set and collation used:

     mysql> SET NAMES utf8;
     mysql> CREATE TABLE german1 (
         ->   c CHAR(10)
         -> ) CHARACTER SET latin1 COLLATE latin1_german1_ci;
     mysql> CREATE TABLE german2 (
         ->   c CHAR(10)
         -> ) CHARACTER SET latin1 COLLATE latin1_german2_ci;
     mysql> CREATE TABLE germanutf8 (
         ->   c CHAR(10)
         -> ) CHARACTER SET utf8 COLLATE utf8_unicode_ci;

Each table contains two records:

     mysql> INSERT INTO german1 VALUES ('Bar'), ('Ba"r');
     mysql> INSERT INTO german2 VALUES ('Bar'), ('Ba"r');
     mysql> INSERT INTO germanutf8 VALUES ('Bar'), ('Ba"r');

Two of the above collations have an `A = A"' equality, and one has no
such equality (`latin1_german2_ci'). For that reason, you'll get these
results in comparisons:

     mysql> SELECT * FROM german1 WHERE c = 'Ba"r';
     +------+
     | c    |
     +------+
     | Bar  |
     | Ba"r  |
     +------+
     mysql> SELECT * FROM german2 WHERE c = 'Ba"r';
     +------+
     | c    |
     +------+
     | Ba"r  |
     +------+
     mysql> SELECT * FROM germanutf8 WHERE c = 'Ba"r';
     +------+
     | c    |
     +------+
     | Bar  |
     | Ba"r  |
     +------+

This is not a bug but rather a consequence of the sorting properties of
`latin1_german1_ci' and `utf8_unicode_ci' (the sorting shown is done
according to the German DIN 5007 standard).


File: manual.info,  Node: charset-collation-information-schema,  Prev: charset-collation-effect,  Up: charset-collations

10.1.7.9 Collation and `INFORMATION_SCHEMA' Searches
....................................................

String columns in `INFORMATION_SCHEMA' tables have a collation of
`utf8_general_ci', which is case insensitive. However, searches in
`INFORMATION_SCHEMA' string columns are also affected by file system
case sensitivity. For values that correspond to objects that are
represented in the file system, such as names of databases and tables,
searches may be case sensitive if the file system is case sensitive.
This section describes how to work around this issue if necessary; see
also Bug #34921.

Suppose that a query searches the `SCHEMATA.SCHEMA_NAME' column for the
`test' database. On Linux, file systems are case sensitive, so
comparisons of `SCHEMATA.SCHEMA_NAME' with `'test'' match, but
comparisons with `'TEST'' do not:

     mysql> SELECT SCHEMA_NAME FROM INFORMATION_SCHEMA.SCHEMATA
         -> WHERE SCHEMA_NAME = 'test';
     +-------------+
     | SCHEMA_NAME |
     +-------------+
     | test        |
     +-------------+
     1 row in set (0.01 sec)

     mysql> SELECT SCHEMA_NAME FROM INFORMATION_SCHEMA.SCHEMATA
         -> WHERE SCHEMA_NAME = 'TEST';
     Empty set (0.00 sec)

On Windows or Mac OS X where file systems are not case sensitive,
comparisons match both `'test'' and `'TEST'':

     mysql> SELECT SCHEMA_NAME FROM INFORMATION_SCHEMA.SCHEMATA
         -> WHERE SCHEMA_NAME = 'test';
     +-------------+
     | SCHEMA_NAME |
     +-------------+
     | test        |
     +-------------+
     1 row in set (0.00 sec)

     mysql> SELECT SCHEMA_NAME FROM INFORMATION_SCHEMA.SCHEMATA
         -> WHERE SCHEMA_NAME = 'TEST';
     +-------------+
     | SCHEMA_NAME |
     +-------------+
     | TEST        |
     +-------------+
     1 row in set (0.00 sec)

The value of the `lower_case_table_names' system variable makes no
difference in this context.

This behavior occurs because the `utf8_general_ci' collation is not
used for `INFORMATION_SCHEMA' queries when searching the file system
for database objects. It is a result of optimizations implemented for
`INFORMATION_SCHEMA' searches in MySQL. For information about these
optimizations, see *Note information-schema-optimization::.

Searches in `INFORMATION_SCHEMA' string columns for values that refer to
`INFORMATION_SCHEMA' itself do use the `utf8_general_ci' collation
because `INFORMATION_SCHEMA' is a `virtual' database and is not
represented in the file system. For example, comparisons with
`SCHEMATA.SCHEMA_NAME' match `'information_schema'' or
`'INFORMATION_SCHEMA'' regardless of platform:

     mysql> SELECT SCHEMA_NAME FROM INFORMATION_SCHEMA.SCHEMATA
         -> WHERE SCHEMA_NAME = 'information_schema';
     +--------------------+
     | SCHEMA_NAME        |
     +--------------------+
     | information_schema |
     +--------------------+
     1 row in set (0.00 sec)

     mysql> SELECT SCHEMA_NAME FROM INFORMATION_SCHEMA.SCHEMATA
         -> WHERE SCHEMA_NAME = 'INFORMATION_SCHEMA';
     +--------------------+
     | SCHEMA_NAME        |
     +--------------------+
     | information_schema |
     +--------------------+
     1 row in set (0.00 sec)

If the result of a string operation on an `INFORMATION_SCHEMA' column
differs from expectations, a workaround is to use an explicit `COLLATE'
clause to force a suitable collation (*Note charset-collate::). For
example, to perform a case-insensitive search, use `COLLATE' with the
`INFORMATION_SCHEMA' column name:

     mysql> SELECT SCHEMA_NAME FROM INFORMATION_SCHEMA.SCHEMATA
         -> WHERE SCHEMA_NAME COLLATE utf8_general_ci = 'test';
     +-------------+
     | SCHEMA_NAME |
     +-------------+
     | test        |
     +-------------+
     1 row in set (0.00 sec)

     mysql> SELECT SCHEMA_NAME FROM INFORMATION_SCHEMA.SCHEMATA
         -> WHERE SCHEMA_NAME COLLATE utf8_general_ci = 'TEST';
     | SCHEMA_NAME |
     +-------------+
     | test        |
     +-------------+
     1 row in set (0.00 sec)

You can also use the `UPPER()' or `LOWER()' function:

     WHERE UPPER(SCHEMA_NAME) = 'TEST'
     WHERE LOWER(SCHEMA_NAME) = 'test'

Although a case-insensitive comparison can be performed even on
platforms with case-sensitive file systems, as just shown, it is not
necessarily always the right thing to do. On such platforms, it is
possible to have multiple objects with names that differ only in
lettercase. For example, tables named `city', `CITY', and `City' can
all exist simultaneously. Consider whether a search should match all
such names or just one and write queries accordingly:

     WHERE TABLE_NAME COLLATE utf8_bin = 'City'
     WHERE TABLE_NAME COLLATE utf8_general_ci = 'city'
     WHERE UPPER(TABLE_NAME) = 'CITY'
     WHERE LOWER(TABLE_NAME) = 'city'

The first of those comparisons (with `utf8_bin') is case sensitive; the
others are not.


File: manual.info,  Node: charset-repertoire,  Next: charset-operations,  Prev: charset-collations,  Up: charset

10.1.8 String Repertoire
------------------------

The _repertoire_ of a character set is the collection of characters in
the set.

String expressions have a repertoire attribute, which can have two
values:

   * `ASCII': The expression can contain only characters in the Unicode
     range `U+0000' to `U+007F'.

   * `UNICODE': The expression can contain characters in the Unicode
     range `U+0000' to `U+FFFF'.

The `ASCII' range is a subset of `UNICODE' range, so a string with
`ASCII' repertoire can be converted safely without loss of information
to the character set of any string with `UNICODE' repertoire or to a
character set that is a superset of `ASCII'. (All MySQL character sets
are supersets of `ASCII' with the exception of `swe7', which reuses some
punctuation characters for Swedish accented characters.) The use of
repertoire enables character set conversion in expressions for many
cases where MySQL would otherwise return an `illegal mix of collations'
error.

The following discussion provides examples of expressions and their
repertoires, and describes how the use of repertoire changes string
expression evaluation:

   * The repertoire for string constants depends on string content:

          SET NAMES utf8; SELECT 'abc';
          SELECT _utf8'def';
          SELECT N'MySQL';

     Although the character set is `utf8' in each of the preceding
     cases, the strings do not actually contain any characters outside
     the ASCII range, so their repertoire is `ASCII' rather than
     `UNICODE'.

   * Columns having the `ascii' character set have `ASCII' repertoire
     because of their character set. In the following table, `c1' has
     `ASCII' repertoire:

          CREATE TABLE t1 (c1 CHAR(1) CHARACTER SET ascii);

     The following example illustrates how repertoire enables a result
     to be determined in a case where an error occurs without
     repertoire:

          CREATE TABLE t1 (
            c1 CHAR(1) CHARACTER SET latin1,
            c2 CHAR(1) CHARACTER SET ascii
          );
          INSERT INTO t1 VALUES ('a','b');
          SELECT CONCAT(c1,c2) FROM t1;

     Without repertoire, this error occurs:

          ERROR 1267 (HY000): Illegal mix of collations (latin1_swedish_ci,IMPLICIT)
          and (ascii_general_ci,IMPLICIT) for operation 'concat'

     Using repertoire, subset to superset (`ascii' to `latin1')
     conversion can occur and a result is returned:

          +---------------+
          | CONCAT(c1,c2) |
          +---------------+
          | ab            |
          +---------------+

   * Functions with one string argument inherit the repertoire of their
     argument. The result of `UPPER(_utf8'ABC')' has `ASCII' repertoire
     because its argument has `ASCII' repertoire.

   * For functions that return a string but do not have string
     arguments and use `character_set_connection' as the result
     character set, the result repertoire is `ASCII' if
     `character_set_connection' is `ascii', and `UNICODE' otherwise:

          FORMAT(NUMERIC_COLUMN, 4);

     Use of repertoire changes how MySQL evaluates the following
     example:

          SET NAMES ascii;
          CREATE TABLE t1 (a INT, b VARCHAR(10) CHARACTER SET latin1);
          INSERT INTO t1 VALUES (1,'b');
          SELECT CONCAT(FORMAT(a, 4), b) FROM t1;

     Without repertoire, this error occurs:

          ERROR 1267 (HY000): Illegal mix of collations (ascii_general_ci,COERCIBLE)
          and (latin1_swedish_ci,IMPLICIT) for operation 'concat'

     With repertoire, a result is returned:

          +-------------------------+
          | CONCAT(FORMAT(a, 4), b) |
          +-------------------------+
          | 1.0000b                 |
          +-------------------------+

   * Functions with two or more string arguments use the `widest'
     argument repertoire for the result repertoire (`UNICODE' is wider
     than `ASCII'). Consider the following `CONCAT()' calls:

          CONCAT(_ucs2 0x0041, _ucs2 0x0042)
          CONCAT(_ucs2 0x0041, _ucs2 0x00C2)

     For the first call, the repertoire is `ASCII' because both
     arguments are within the range of the `ascii' character set. For
     the second call, the repertoire is `UNICODE' because the second
     argument is outside the `ascii' character set range.

   * The repertoire for function return values is determined based only
     on the repertoire of the arguments that affect the result's
     character set and collation.

          IF(column1 < column2, 'smaller', 'greater')

     The result repertoire is `ASCII' because the two string arguments
     (the second argument and the third argument) both have `ASCII'
     repertoire. The first argument does not matter for the result
     repertoire, even if the expression uses string values.


File: manual.info,  Node: charset-operations,  Next: charset-unicode,  Prev: charset-repertoire,  Up: charset

10.1.9 Operations Affected by Character Set Support
---------------------------------------------------

* Menu:

* charset-result::               Result Strings
* charset-convert::              `CONVERT()' and `CAST()'
* charset-show::                 `SHOW' Statements and `INFORMATION_SCHEMA'

This section describes operations that take character set information
into account.


File: manual.info,  Node: charset-result,  Next: charset-convert,  Prev: charset-operations,  Up: charset-operations

10.1.9.1 Result Strings
.......................

MySQL has many operators and functions that return a string.  This
section answers the question: What is the character set and collation
of such a string?

For simple functions that take string input and return a string result
as output, the output's character set and collation are the same as
those of the principal input value.  For example, `UPPER(X)' returns a
string whose character string and collation are the same as that of X.
The same applies for `INSTR()', `LCASE()', `LOWER()', `LTRIM()',
`MID()', `REPEAT()', `REPLACE()', `REVERSE()', `RIGHT()', `RPAD()',
`RTRIM()', `SOUNDEX()', `SUBSTRING()', `TRIM()', `UCASE()', and
`UPPER()'.

Note: The `REPLACE()' function, unlike all other functions, always
ignores the collation of the string input and performs a case-sensitive
comparison.

If a string input or function result is a binary string, the string has
no character set or collation. This can be checked by using the
`CHARSET()' and `COLLATION()' functions, both of which return `binary'
to indicate that their argument is a binary string:

     mysql> SELECT CHARSET(BINARY 'a'), COLLATION(BINARY 'a');
     +---------------------+-----------------------+
     | CHARSET(BINARY 'a') | COLLATION(BINARY 'a') |
     +---------------------+-----------------------+
     | binary              | binary                |
     +---------------------+-----------------------+

For operations that combine multiple string inputs and return a single
string output, the `aggregation rules' of standard SQL apply for
determining the collation of the result:

   * If an explicit `COLLATE X' occurs, use X.

   * If explicit `COLLATE X' and `COLLATE Y' occur, raise an error.

   * Otherwise, if all collations are X, use X.

   * Otherwise, the result has no collation.

For example, with `CASE ... WHEN a THEN b WHEN b THEN c COLLATE X END',
the resulting collation is X. The same applies for *Note `UNION': union,
`||', `CONCAT()', `ELT()', `GREATEST()', `IF()', and `LEAST()'.

For operations that convert to character data, the character set and
collation of the strings that result from the operations are defined by
the `character_set_connection' and `collation_connection' system
variables. This applies only to `CAST()', `CONV()', `FORMAT()',
`HEX()', and `SPACE()'.

If you are uncertain about the character set or collation of the result
returned by a string function, you can use the `CHARSET()' or
`COLLATION()' function to find out:

     mysql> SELECT USER(), CHARSET(USER()), COLLATION(USER());
     +----------------+-----------------+-------------------+
     | USER()         | CHARSET(USER()) | COLLATION(USER()) |
     +----------------+-----------------+-------------------+
     | test@localhost | utf8            | utf8_general_ci   |
     +----------------+-----------------+-------------------+


File: manual.info,  Node: charset-convert,  Next: charset-show,  Prev: charset-result,  Up: charset-operations

10.1.9.2 `CONVERT()' and `CAST()'
.................................

`CONVERT()' provides a way to convert data between different character
sets. The syntax is:

     CONVERT(EXPR USING TRANSCODING_NAME)

In MySQL, transcoding names are the same as the corresponding character
set names.

Examples:

     SELECT CONVERT(_latin1'Mu"ller' USING utf8);
     INSERT INTO utf8table (utf8column)
         SELECT CONVERT(latin1field USING utf8) FROM latin1table;

`CONVERT(... USING ...)' is implemented according to the standard SQL
specification.

You may also use `CAST()' to convert a string to a different character
set. The syntax is:

     CAST(CHARACTER_STRING AS CHARACTER_DATA_TYPE CHARACTER SET CHARSET_NAME)

Example:

     SELECT CAST(_latin1'test' AS CHAR CHARACTER SET utf8);

If you use `CAST()' without specifying `CHARACTER SET', the resulting
character set and collation are defined by the
`character_set_connection' and `collation_connection' system variables.
If you use `CAST()' with `CHARACTER SET X', the resulting character set
and collation are `X' and the default collation of `X'.

You may not use a `COLLATE' clause inside a `CONVERT()' or `CAST()'
call, but you may use it outside. For example, `CAST(... COLLATE ...)'
is illegal, but `CAST(...)  COLLATE ...' is legal:

     SELECT CAST(_latin1'test' AS CHAR CHARACTER SET utf8) COLLATE utf8_bin;


File: manual.info,  Node: charset-show,  Prev: charset-convert,  Up: charset-operations

10.1.9.3 `SHOW' Statements and `INFORMATION_SCHEMA'
...................................................

Several *Note `SHOW': show. statements provide additional character set
information. These include *Note `SHOW CHARACTER SET':
show-character-set, *Note `SHOW COLLATION': show-collation, *Note `SHOW
CREATE DATABASE': show-create-database, *Note `SHOW CREATE TABLE':
show-create-table. and *Note `SHOW COLUMNS': show-columns. These
statements are described here briefly. For more information, see *Note
show::.

`INFORMATION_SCHEMA' has several tables that contain information
similar to that displayed by the *Note `SHOW': show. statements. For
example, the *Note `CHARACTER_SETS': character-sets-table. and *Note
`COLLATIONS': collations-table. tables contain the information
displayed by *Note `SHOW CHARACTER SET': show-character-set. and *Note
`SHOW COLLATION': show-collation. See *Note information-schema::.

The *Note `SHOW CHARACTER SET': show-character-set.  statement shows
all available character sets. It takes an optional `LIKE' clause that
indicates which character set names to match. For example:

     mysql> SHOW CHARACTER SET LIKE 'latin%';
     +---------+-----------------------------+-------------------+--------+
     | Charset | Description                 | Default collation | Maxlen |
     +---------+-----------------------------+-------------------+--------+
     | latin1  | cp1252 West European        | latin1_swedish_ci |      1 |
     | latin2  | ISO 8859-2 Central European | latin2_general_ci |      1 |
     | latin5  | ISO 8859-9 Turkish          | latin5_turkish_ci |      1 |
     | latin7  | ISO 8859-13 Baltic          | latin7_general_ci |      1 |
     +---------+-----------------------------+-------------------+--------+

The output from *Note `SHOW COLLATION': show-collation.  includes all
available character sets. It takes an optional `LIKE' clause that
indicates which collation names to match. For example:

     mysql> SHOW COLLATION LIKE 'latin1%';
     +-------------------+---------+----+---------+----------+---------+
     | Collation         | Charset | Id | Default | Compiled | Sortlen |
     +-------------------+---------+----+---------+----------+---------+
     | latin1_german1_ci | latin1  |  5 |         |          |       0 |
     | latin1_swedish_ci | latin1  |  8 | Yes     | Yes      |       0 |
     | latin1_danish_ci  | latin1  | 15 |         |          |       0 |
     | latin1_german2_ci | latin1  | 31 |         | Yes      |       2 |
     | latin1_bin        | latin1  | 47 |         | Yes      |       0 |
     | latin1_general_ci | latin1  | 48 |         |          |       0 |
     | latin1_general_cs | latin1  | 49 |         |          |       0 |
     | latin1_spanish_ci | latin1  | 94 |         |          |       0 |
     +-------------------+---------+----+---------+----------+---------+

*Note `SHOW CREATE DATABASE': show-create-database. displays the *Note
`CREATE DATABASE': create-database. statement that creates a given
database:

     mysql> SHOW CREATE DATABASE test;
     +----------+-----------------------------------------------------------------+
     | Database | Create Database                                                 |
     +----------+-----------------------------------------------------------------+
     | test     | CREATE DATABASE `test` /*!40100 DEFAULT CHARACTER SET latin1 */ |
     +----------+-----------------------------------------------------------------+

If no `COLLATE' clause is shown, the default collation for the
character set applies.

*Note `SHOW CREATE TABLE': show-create-table. is similar, but displays
the *Note `CREATE TABLE': create-table.  statement to create a given
table. The column definitions indicate any character set
specifications, and the table options include character set information.

The *Note `SHOW COLUMNS': show-columns. statement displays the
collations of a table's columns when invoked as *Note `SHOW FULL
COLUMNS': show-columns. Columns with *Note `CHAR': char, *Note
`VARCHAR': char, or *Note `TEXT': blob. data types have collations.
Numeric and other noncharacter types have no collation (indicated by
`NULL' as the `Collation' value). For example:

     mysql> SHOW FULL COLUMNS FROM person\G
     *************************** 1. row ***************************
          Field: id
           Type: smallint(5) unsigned
      Collation: NULL
           Null: NO
            Key: PRI
        Default: NULL
          Extra: auto_increment
     Privileges: select,insert,update,references
        Comment:
     *************************** 2. row ***************************
          Field: name
           Type: char(60)
      Collation: latin1_swedish_ci
           Null: NO
            Key:
        Default:
          Extra:
     Privileges: select,insert,update,references
        Comment:

The character set is not part of the display but is implied by the
collation name.


File: manual.info,  Node: charset-unicode,  Next: charset-unicode-upgrading,  Prev: charset-operations,  Up: charset

10.1.10 Unicode Support
-----------------------

* Menu:

* charset-unicode-ucs2::         The `ucs2' Character Set (UCS-2 Unicode Encoding)
* charset-unicode-utf16::        The `utf16' Character Set (UTF-16 Unicode Encoding)
* charset-unicode-utf32::        The `utf32' Character Set (UTF-32 Unicode Encoding)
* charset-unicode-utf8::         The `utf8' Character Set (3-Byte UTF-8 Unicode Encoding)
* charset-unicode-utf8mb3::      The `utf8mb3' `Character Set' (Alias for `utf8')
* charset-unicode-utf8mb4::      The `utf8mb4' Character Set (4-Byte UTF-8 Unicode Encoding)

The initial implementation of Unicode support (in MySQL 4.1) included
two character sets for storing Unicode data:

   * `ucs2', the UCS-2 encoding of the Unicode character set using 16
     bits per character.

   * `utf8', a UTF-8 encoding of the Unicode character set using one to
     three bytes per character.

These two character sets support the characters from the Basic
Multilingual Plane (BMP) of Unicode Version 3.0. BMP characters have
these characteristics:

   * Their code values are between 0 and 65535 (or `U+0000' ..
     `U+FFFF').

   * They can be encoded with a fixed 16-bit word, as in `ucs2'.

   * They can be encoded with 8, 16, or 24 bits, as in `utf8'.

   * They are sufficient for almost all characters in major languages.

Characters not supported by the aforementioned character sets include
supplementary characters that lie outside the BMP.  Characters outside
the BMP compare as REPLACEMENT CHARACTER and convert to `'?'' when
converted to a Unicode character set.

As of MySQL 5.5.3, Unicode support includes supplementary characters,
which requires new character sets that have a broader range and
therefore take more space. The following table shows a brief feature
comparison of previous and current Unicode support.

This table shows MySQL Unicode support before MySQL 5.5 compared with
Unicode support in MySQL 5.5 and up.

Before MySQL 5.5                     MySQL 5.5 and up
All Unicode 3.0 characters           All Unicode 5.0 and 6.0 characters
No supplementary characters          With supplementary characters
`ucs2' character set, BMP only       No change
`utf8' character set for up to       No change
three bytes, BMP only                
                                     New `utf8mb4' character set for up
                                     to four bytes, BMP or supplemental
                                     New `utf16' character set, BMP or
                                     supplemental
                                     New `utf32' character set, BMP or
                                     supplemental

These changes are upward compatible. If you want to use the new
character sets, there are potential incompatibility issues for your
applications; see *Note charset-unicode-upgrading::. That section also
describes how to convert tables from `utf8' to the (4-byte) `utf8mb4'
character set, and what constraints may apply in doing so.

MySQL 5.5 supports these Unicode character sets:

   * `ucs2', the UCS-2 encoding of the Unicode character set using 16
     bits per character.

   * `utf16', the UTF-16 encoding for the Unicode character set; like
     `ucs2' but with an extension for supplementary characters.

   * `utf32', the UTF-32 encoding for the Unicode character set using
     32 bits per character.

   * `utf8', a UTF-8 encoding of the Unicode character set using one to
     three bytes per character.

   * `utf8mb4', a UTF-8 encoding of the Unicode character set using one
     to four bytes per character.

`ucs2' and `utf8' support BMP characters. `utf8mb4', `utf16', and
`utf32' support BMP and supplementary characters.

A similar set of collations is available for each Unicode character
set. For example, each has a Danish collation, the names of which are
`ucs2_danish_ci', `utf16_danish_ci', `utf32_danish_ci',
`utf8_danish_ci', and `utf8mb4_danish_ci'. All Unicode collations are
listed at *Note charset-unicode-sets::, which also describes collation
properties for supplementary characters.

Note that although many of the supplementary characters come from East
Asian languages, what MySQL 5.5 adds is support for more Japanese and
Chinese characters in Unicode character sets, not support for new
Japanese and Chinese character sets.

The MySQL implementation of UCS-2, UTF-16, and UTF-32 stores characters
in big-endian byte order and does not use a byte order mark (BOM) at
the beginning of values. Other database systems might use little-endian
byte order or a BOM. In such cases, conversion of values will need to
be performed when transferring data between those systems and MySQL.

MySQL uses no BOM for UTF-8 values.

Client applications that need to communicate with the server using
Unicode should set the client character set accordingly; for example,
by issuing a `SET NAMES 'utf8'' statement. `ucs2', `utf16', and `utf32'
cannot be used as a client character set, which means that they do not
work for `SET NAMES' or `SET CHARACTER SET'. (See *Note
charset-connection::.)

The following sections provide additional detail on the Unicode
character sets in MySQL.


File: manual.info,  Node: charset-unicode-ucs2,  Next: charset-unicode-utf16,  Prev: charset-unicode,  Up: charset-unicode

10.1.10.1 The `ucs2' Character Set (UCS-2 Unicode Encoding)
...........................................................

In UCS-2, every character is represented by a 2-byte Unicode code with
the most significant byte first. For example: `LATIN CAPITAL LETTER A'
has the code `0x0041' and it is stored as a 2-byte sequence: `0x00
0x41'. `CYRILLIC SMALL LETTER YERU' (Unicode `0x044B') is stored as a
2-byte sequence: `0x04 0x4B'. For Unicode characters and their codes,
please refer to the Unicode Home Page (http://www.unicode.org/).

In MySQL, the `ucs2' character set is a fixed-length 16-bit encoding
for Unicode BMP characters.


File: manual.info,  Node: charset-unicode-utf16,  Next: charset-unicode-utf32,  Prev: charset-unicode-ucs2,  Up: charset-unicode

10.1.10.2 The `utf16' Character Set (UTF-16 Unicode Encoding)
.............................................................

The `utf16' character set is the `ucs2' character set with an extension
that enables encoding of supplementary characters:

   * For a BMP character, `utf16' and `ucs2' have identical storage
     characteristics: same code values, same encoding, same length.

   * For a supplementary character, `utf16' has a special sequence for
     representing the character using 32 bits. This is called the
     `surrogate' mechanism: For a number greater than `0xffff', take 10
     bits and add them to `0xd800' and put them in the first 16-bit
     word, take 10 more bits and add them to `0xdc00' and put them in
     the next 16-bit word. Consequently, all supplementary characters
     require 32 bits, where the first 16 bits are a number between
     `0xd800' and `0xdbff', and the last 16 bits are a number between
     `0xdc00' and `0xdfff'.  Examples are in Section 15.5 Surrogates
     Area (http://unicode.org/versions/Unicode4.0.0/ch15.pdf) of the
     Unicode 4.0 document.

Because `utf16' supports surrogates and `ucs2' does not, there is a
validity check that applies only in `utf16': You cannot insert a top
surrogate without a bottom surrogate, or vice versa. For example:

     INSERT INTO t (ucs2_column) VALUES (0xd800); /* legal */
     INSERT INTO t (utf16_column)VALUES (0xd800); /* illegal */

There is no validity check for characters that are technically valid
but are not true Unicode (that is, characters that Unicode considers to
be `unassigned code points' or `private use' characters or even
`illegals' like `0xffff'). For example, since `U+F8FF' is the Apple
Logo, this is legal:

     INSERT INTO t (utf16_column)VALUES (0xf8ff); /* legal */

Such characters cannot be expected to mean the same thing to everyone.

Because MySQL must allow for the worst case (that one character
requires four bytes) the maximum length of a `utf16' column or index is
only half of the maximum length for a `ucs2' column or index.  For
example, in MySQL 5.5, the maximum length of a `MEMORY' table index key
is 3072 bytes, so these statements create tables with the longest
permitted indexes for `ucs2' and `utf16' columns:

     CREATE TABLE tf (s1 VARCHAR(1536) CHARACTER SET ucs2) ENGINE=MEMORY;
     CREATE INDEX i ON tf (s1);
     CREATE TABLE tg (s1 VARCHAR(768) CHARACTER SET utf16) ENGINE=MEMORY;
     CREATE INDEX i ON tg (s1);


File: manual.info,  Node: charset-unicode-utf32,  Next: charset-unicode-utf8,  Prev: charset-unicode-utf16,  Up: charset-unicode

10.1.10.3 The `utf32' Character Set (UTF-32 Unicode Encoding)
.............................................................

The `utf32' character set is fixed length (like `ucs2' and unlike
`utf16'). `utf32' uses 32 bits for every character, unlike `ucs2'
(which uses 16 bits for every character), and unlike `utf16' (which
uses 16 bits for some characters and 32 bits for others).

`utf32' takes twice as much space as `ucs2' and more space than
`utf16', but `utf32' has the same advantage as `ucs2' that it is
predictable for storage: The required number of bytes for `utf32'
equals the number of characters times 4. Also, unlike `utf16', there
are no tricks for encoding in `utf32', so the stored value equals the
code value.

To demonstrate how the latter advantage is useful, here is an example
that shows how to determine a `utf8mb4' value given the `utf32' code
value:

     /* Assume code value = 100cc LINEAR B WHEELED CHARIOT */
     CREATE TABLE tmp (utf32_col CHAR(1) CHARACTER SET utf32,
                       utf8mb4_col CHAR(1) CHARACTER SET utf8mb4);
     INSERT INTO tmp VALUES (0x000100cc,NULL);
     UPDATE tmp SET utf8mb4_col = utf32_col;
     SELECT HEX(utf32_col),HEX(utf8mb4_col) FROM tmp;

MySQL is very forgiving about additions of unassigned Unicode
characters or private-use-area characters. There is in fact only one
validity check for `utf32': No code value may be greater than
`0x10ffff'. For example, this is illegal:

     INSERT INTO t (utf32_column) VALUES (0x110000); /* illegal */


File: manual.info,  Node: charset-unicode-utf8,  Next: charset-unicode-utf8mb3,  Prev: charset-unicode-utf32,  Up: charset-unicode

10.1.10.4 The `utf8' Character Set (3-Byte UTF-8 Unicode Encoding)
..................................................................

UTF-8 (Unicode Transformation Format with 8-bit units) is an
alternative way to store Unicode data. It is implemented according to
RFC 3629, which describes encoding sequences that take from one to four
bytes. (An older standard for UTF-8 encoding, RFC 2279, describes UTF-8
sequences that take from one to six bytes. RFC 3629 renders RFC 2279
obsolete; for this reason, sequences with five and six bytes are no
longer used.)

The idea of UTF-8 is that various Unicode characters are encoded using
byte sequences of different lengths:

   * Basic Latin letters, digits, and punctuation signs use one byte.

   * Most European and Middle East script letters fit into a 2-byte
     sequence: extended Latin letters (with tilde, macron, acute, grave
     and other accents), Cyrillic, Greek, Armenian, Hebrew, Arabic,
     Syriac, and others.

   * Korean, Chinese, and Japanese ideographs use 3-byte or 4-byte
     sequences.

The `utf8' character set is the same in MySQL 5.5 as before 5.5 and has
exactly the same characteristics:

   * No support for supplementary characters (BMP characters only).

   * A maximum of three bytes per multi-byte character.

Exactly the same set of characters is available in `utf8' as in `ucs2'.
That is, they have the same repertoire.


File: manual.info,  Node: charset-unicode-utf8mb3,  Next: charset-unicode-utf8mb4,  Prev: charset-unicode-utf8,  Up: charset-unicode

10.1.10.5 The `utf8mb3' `Character Set' (Alias for `utf8')
..........................................................

In a future version of MySQL, it is possible that `utf8' will become
the 4-byte `utf8', and that users who want to indicate 3-byte `utf8'
will have to say `utf8mb3'. To avoid some future problems which might
occur with replication when master and slave servers have different
MySQL versions, it is possible as of MySQL 5.5.3 for users to specify
`utf8mb3' in `CHARACTER SET' clauses, and `utf8mb3_COLLATION_SUBSTRING'
in `COLLATE' clauses, where COLLATION_SUBSTRING is `bin', `czech_ci',
`danish_ci', `esperanto_ci', `estonian_ci', and so forth. For example:

     CREATE TABLE t (s1 CHAR(1) CHARACTER SET utf8mb3;
     SELECT * FROM t WHERE s1 COLLATE utf8mb3_general_ci = 'x';
     DECLARE x VARCHAR(5) CHARACTER SET utf8mb3 COLLATE utf8mb3_danish_ci;
     SELECT CAST('a' AS CHAR CHARACTER SET utf8) COLLATE utf8_czech_ci;

MySQL immediately converts instances of `utf8mb3' in an alias to
`utf8', so in statements such as `SHOW CREATE TABLE' or `SELECT
CHARACTER_SET_NAME FROM INFORMATION_SCHEMA.COLUMNS' or `SELECT
COLLATION_NAME FROM INFORMATION_SCHEMA.COLUMNS', users will see the true
name, `utf8' or `utf8_COLLATION_SUBSTRING'.

The `utf8mb3' alias is valid only in `CHARACTER SET' clauses, and in
certain other places. For example, these are legal:

     mysqld --character-set-server=utf8mb3
     SET NAMES 'utf8mb3'; /* and other SET statements that have similar effect */
     SELECT _utf8mb3 'a';


File: manual.info,  Node: charset-unicode-utf8mb4,  Prev: charset-unicode-utf8mb3,  Up: charset-unicode

10.1.10.6 The `utf8mb4' Character Set (4-Byte UTF-8 Unicode Encoding)
.....................................................................

The character set named `utf8' uses a maximum of three bytes per
character and contains only BMP characters.  As of MySQL 5.5.3, the
`utf8mb4' character set uses a maximum of four bytes per character
supports supplemental characters:

   * For a BMP character, `utf8' and `utf8mb4' have identical storage
     characteristics: same code values, same encoding, same length.

   * For a supplementary character, `utf8' cannot store the character
     at all, while `utf8mb4' requires four bytes to store it. Since
     `utf8' cannot store the character at all, you do not have any
     supplementary characters in `utf8' columns and you need not worry
     about converting characters or losing data when upgrading `utf8'
     data from older versions of MySQL.

`utf8mb4' is a superset of `utf8', so for an operation such as the
following concatenation, the result has character set `utf8mb4' and the
collation of `utf8mb4_col':

     SELECT CONCAT(utf8_col, utf8mb4_col);

Similarly, the following comparison in the `WHERE' clause works
according to the collation of `utf8mb_col':

     SELECT * FROM utf8_tbl, utf8mb4_tbl
     WHERE utf8_tbl.utf8_col = utf8mb4_tbl.utf8mb4_col;

*Tip*:

To save space with UTF-8, use *Note `VARCHAR': char. instead of *Note
`CHAR': char. Otherwise, MySQL must reserve three (or four) bytes for
each character in a `CHAR CHARACTER SET utf8' (or `utf8mb4') column
because that is the maximum possible length. For example, MySQL must
reserve 40 bytes for a `CHAR(10) CHARACTER SET utf8mb4' column.


File: manual.info,  Node: charset-unicode-upgrading,  Next: charset-metadata,  Prev: charset-unicode,  Up: charset

10.1.11 Upgrading from Previous to Current Unicode Support
----------------------------------------------------------

This section describes issues pertaining to Unicode support that you
may face when upgrading to MySQL 5.5 from an older MySQL release. It
also provides guidelines for downgrading from MySQL 5.5 to an older
release.

In most respects, upgrading to MySQL 5.5 should present few problems
with regard to Unicode usage, although there are some potential areas
of incompatibility. These are the primary areas of concern:

   * For the variable-length character data types (*Note `VARCHAR':
     char. and the *Note `TEXT': blob. types), the maximum length in
     characters is less for `utf8mb4' columns than for `utf8' columns.

   * For all character data types (*Note `CHAR': char, *Note `VARCHAR':
     char, and the *Note `TEXT': blob. types), the maximum number of
     characters that can be indexed is less for `utf8mb4' columns than
     for `utf8' columns.

Consequently, if you want to upgrade tables from `utf8' to `utf8mb4' to
take advantage of supplementary-character support, it may be necessary
to change some column or index definitions.

Tables can be converted from `utf8' to `utf8mb4' by using *Note `ALTER
TABLE': alter-table. Suppose that a table was originally defined as
follows:

     CREATE TABLE t1 (
       col1 CHAR(10) CHARACTER SET utf8 COLLATE utf8_unicode_ci NOT NULL,
       col2 CHAR(10) CHARACTER SET utf8 COLLATE utf8_bin NOT NULL
     ) CHARACTER SET utf8;

The following statement converts `t1' to use `utf8mb4':

     ALTER TABLE t1
       DEFAULT CHARACTER SET utf8mb4,
       MODIFY col1 CHAR(10)
         CHARACTER SET utf8mb4 COLLATE utf8mb4_unicode_ci NOT NULL,
       MODIFY col2 CHAR(10)
         CHARACTER SET utf8mb4 COLLATE utf8mb4_bin NOT NULL;

In terms of table content, conversion from `utf8' to `utf8mb4' presents
no problems:

   * For a BMP character, `utf8' and `utf8mb4' have identical storage
     characteristics: same code values, same encoding, same length.

   * For a supplementary character, `utf8' cannot store the character
     at all, while `utf8mb4' requires four bytes to store it.  Since
     `utf8' cannot store the character at all, you do not have any
     supplementary characters in `utf8' columns and you need not worry
     about converting characters or losing data when upgrading `utf8'
     data from older versions of MySQL.

In terms of table structure, the catch when converting from `utf8' to
`utf8mb4' is that the maximum length of a column or index key is
unchanged in terms of _bytes_. Therefore, it is smaller in terms of
_characters_ because the maximum length of a character is four bytes
instead of three. For the *Note `CHAR': char, *Note `VARCHAR': char, and
*Note `TEXT': blob. data types, watch for these things when converting
your MySQL tables:

   * Check all definitions of `utf8' columns and make sure they will
     not exceed the maximum length for the storage engine.

   * Check all indexes on `utf8' columns and make sure they will not
     exceed the maximum length for the storage engine. Sometimes the
     maximum can change due to storage engine enhancements.

If the preceding conditions apply, you must either reduce the defined
length of columns or indexes, or continue to use `utf8' rather than
`utf8mb4'.

Here are some examples where structural changes may be needed:

   * A *Note `TINYTEXT': blob. column can hold up to 255 bytes, so it
     can hold up to 85 3-byte or 63 4-byte characters. Suppose that you
     have a *Note `TINYTEXT': blob. column that uses `utf8' but must be
     able to contain more than 63 characters. You cannot convert it to
     `utf8mb4' unless you also change the data type to a longer type
     such as *Note `TEXT': blob.

     Similarly, a very long *Note `VARCHAR': char. column may need to be
     changed to one of the longer *Note `TEXT': blob. types if you want
     to convert it from `utf8' to `utf8mb4'.

   * `InnoDB' has a maximum index length of 767 bytes, so for `utf8' or
     `utf8mb4' columns, you can index a maximum of 255 or 191
     characters, respectively. If you currently have `utf8' columns
     with indexes longer than 191 characters, you will need to index a
     smaller number of characters. In an `InnoDB' table, these column
     and index definitions are legal:

          col1 VARCHAR(500) CHARACTER SET utf8, INDEX (col1(255))

     To use `utf8mb4' instead, the index must be smaller:

          col1 VARCHAR(500) CHARACTER SET utf8mb4, INDEX (col1(191))

The preceding types of changes are most likely to be required only if
you have very long columns or indexes. Otherwise, you should be able to
convert your tables from `utf8' to `utf8mb4' without problems. You can
do this by using *Note `ALTER TABLE': alter-table. as described earlier
in this section after upgrading in place to 5.5.

The following items summarize other potential areas of incompatibility:

   * Performance of 4-byte UTF-8 (`utf8mb4') is slower than for 3-byte
     UTF-8 (`utf8'). If you do not want to incur this penalty, continue
     to use `utf8'.

   * `SET NAMES 'utf8mb4'' causes use of the 4-byte character set for
     connection character sets. As long as no 4-byte characters are
     sent from the server, there should be no problems. Otherwise,
     applications that expect to receive a maximum of three bytes per
     character may have problems. Conversely, applications that expect
     to send 4-byte characters must ensure that the server understands
     them.

   * Applications cannot send `utf16' or `utf32' character data to an
     older server that does not understand them.

   * For replication, if the character sets that support supplementary
     characters are going to be used on the master, all slaves must
     understand them as well. If you attempt to replicate from a MySQL
     5.5 master to an older slave, `utf8' data will be seen as `utf8'
     by the slave and should replicate correctly. But you cannot send
     `utf8mb4', `utf16', or `utf32' data.

     Also, keep in mind the general principle that if a table has
     different definitions on the master and slave, this can lead to
     unexpected results. For example, the differences in limitations on
     index key length makes it risky to use `utf8' on the master and
     `utf8mb4' on the slave.

If you have upgraded to MySQL 5.5, and then decide to downgrade back to
an older release, these considerations apply:

   * `ucs2' and `utf8' data should present no problems.

   * Any definitions that refer to the `utf8mb4', `utf16', or `utf32'
     character sets will not be recognized by the older server.

   * For object definitions that refer to the `utf8mb4' character set,
     you can dump them with *Note `mysqldump': mysqldump. in MySQL 5.5,
     edit the dump file to change instances of `utf8mb4' to `utf8', and
     reload the file in the older server, as long as there are no
     4-byte characters in the data. The older server will see `utf8' in
     the dump file object definitions and create new objects that use
     the (3-byte) `utf8' character set.


File: manual.info,  Node: charset-metadata,  Next: charset-conversion,  Prev: charset-unicode-upgrading,  Up: charset

10.1.12 UTF-8 for Metadata
--------------------------

_Metadata_ is `the data about the data.' Anything that _describes_ the
database--as opposed to being the _contents_ of the database--is
metadata.  Thus column names, database names, user names, version names,
and most of the string results from *Note `SHOW': show. are metadata.
This is also true of the contents of tables in `INFORMATION_SCHEMA'
because those tables by definition contain information about database
objects.

Representation of metadata must satisfy these requirements:

   * All metadata must be in the same character set. Otherwise, neither
     the *Note `SHOW': show. statements nor *Note `SELECT': select.
     statements for tables in `INFORMATION_SCHEMA' would work properly
     because different rows in the same column of the results of these
     operations would be in different character sets.

   * Metadata must include all characters in all languages.  Otherwise,
     users would not be able to name columns and tables using their own
     languages.

To satisfy both requirements, MySQL stores metadata in a Unicode
character set, namely UTF-8. This does not cause any disruption if you
never use accented or non-Latin characters. But if you do, you should
be aware that metadata is in UTF-8.

The metadata requirements mean that the return values of the `USER()',
`CURRENT_USER()', `SESSION_USER()', `SYSTEM_USER()', `DATABASE()', and
`VERSION()' functions have the UTF-8 character set by default.

The server sets the `character_set_system' system variable to the name
of the metadata character set:

     mysql> SHOW VARIABLES LIKE 'character_set_system';
     +----------------------+-------+
     | Variable_name        | Value |
     +----------------------+-------+
     | character_set_system | utf8  |
     +----------------------+-------+

Storage of metadata using Unicode does _not_ mean that the server
returns headers of columns and the results of *Note `DESCRIBE':
describe. functions in the `character_set_system' character set by
default. When you use `SELECT column1 FROM t', the name `column1'
itself is returned from the server to the client in the character set
determined by the value of the `character_set_results' system variable,
which has a default value of `latin1'. If you want the server to pass
metadata results back in a different character set, use the `SET NAMES'
statement to force the server to perform character set conversion. `SET
NAMES' sets the `character_set_results' and other related system
variables. (See *Note charset-connection::.) Alternatively, a client
program can perform the conversion after receiving the result from the
server. It is more efficient for the client to perform the conversion,
but this option is not always available for all clients.

If `character_set_results' is set to `NULL', no conversion is performed
and the server returns metadata using its original character set (the
set indicated by `character_set_system').

Error messages returned from the server to the client are converted to
the client character set automatically, as with metadata.

If you are using (for example) the `USER()' function for comparison or
assignment within a single statement, don't worry. MySQL performs some
automatic conversion for you.

     SELECT * FROM t1 WHERE USER() = latin1_column;

This works because the contents of `latin1_column' are automatically
converted to UTF-8 before the comparison.

     INSERT INTO t1 (latin1_column) SELECT USER();

This works because the contents of `USER()' are automatically converted
to `latin1' before the assignment.

Although automatic conversion is not in the SQL standard, the SQL
standard document does say that every character set is (in terms of
supported characters) a `subset' of Unicode. Because it is a well-known
principle that `what applies to a superset can apply to a subset,' we
believe that a collation for Unicode can apply for comparisons with
non-Unicode strings. For more information about coercion of strings,
see *Note charset-collation-expressions::.


File: manual.info,  Node: charset-conversion,  Next: charset-charsets,  Prev: charset-metadata,  Up: charset

10.1.13 Column Character Set Conversion
---------------------------------------

To convert a binary or nonbinary string column to use a particular
character set, use *Note `ALTER TABLE': alter-table. For successful
conversion to occur, one of the following conditions must apply:

   * If the column has a binary data type (*Note `BINARY':
     binary-varbinary, *Note `VARBINARY': binary-varbinary, *Note
     `BLOB': blob.), all the values that it contains must be encoded
     using a single character set (the character set you're converting
     the column to). If you use a binary column to store information in
     multiple character sets, MySQL has no way to know which values use
     which character set and cannot convert the data properly.

   * If the column has a nonbinary data type (*Note `CHAR': char, *Note
     `VARCHAR': char, *Note `TEXT': blob.), its contents should be
     encoded in the column character set, not some other character set.
     If the contents are encoded in a different character set, you can
     convert the column to use a binary data type first, and then to a
     nonbinary column with the desired character set.

Suppose that a table `t' has a binary column named `col1' defined as
`VARBINARY(50)'. Assuming that the information in the column is encoded
using a single character set, you can convert it to a nonbinary column
that has that character set.  For example, if `col1' contains binary
data representing characters in the `greek' character set, you can
convert it as follows:

     ALTER TABLE t MODIFY col1 VARCHAR(50) CHARACTER SET greek;

If your original column has a type of `BINARY(50)', you could convert
it to `CHAR(50)', but the resulting values will be padded with `0x00'
bytes at the end, which may be undesirable. To remove these bytes, use
the `TRIM()' function:

     UPDATE t SET col1 = TRIM(TRAILING 0x00 FROM col1);

Suppose that table `t' has a nonbinary column named `col1' defined as
`CHAR(50) CHARACTER SET latin1' but you want to convert it to use
`utf8' so that you can store values from many languages. The following
statement accomplishes this:

     ALTER TABLE t MODIFY col1 CHAR(50) CHARACTER SET utf8;

Conversion may be lossy if the column contains characters that are not
in both character sets.

A special case occurs if you have old tables from before MySQL 4.1
where a nonbinary column contains values that actually are encoded in a
character set different from the server's default character set. For
example, an application might have stored `sjis' values in a column,
even though MySQL's default character set was `latin1'. It is possible
to convert the column to use the proper character set but an additional
step is required. Suppose that the server's default character set was
`latin1' and `col1' is defined as `CHAR(50)' but its contents are
`sjis' values. The first step is to convert the column to a binary data
type, which removes the existing character set information without
performing any character conversion:

     ALTER TABLE t MODIFY col1 BLOB;

The next step is to convert the column to a nonbinary data type with
the proper character set:

     ALTER TABLE t MODIFY col1 CHAR(50) CHARACTER SET sjis;

This procedure requires that the table not have been modified already
with statements such as *Note `INSERT': insert. or *Note `UPDATE':
update. after an upgrade to MySQL 4.1 or later. In that case, MySQL
would store new values in the column using `latin1', and the column will
contain a mix of `sjis' and `latin1' values and cannot be converted
properly.

If you specified attributes when creating a column initially, you
should also specify them when altering the table with *Note `ALTER
TABLE': alter-table. For example, if you specified `NOT NULL' and an
explicit `DEFAULT' value, you should also provide them in the *Note
`ALTER TABLE': alter-table. statement.  Otherwise, the resulting column
definition will not include those attributes.


File: manual.info,  Node: charset-charsets,  Prev: charset-conversion,  Up: charset

10.1.14 Character Sets and Collations That MySQL Supports
---------------------------------------------------------

* Menu:

* charset-unicode-sets::         Unicode Character Sets
* charset-we-sets::              West European Character Sets
* charset-ce-sets::              Central European Character Sets
* charset-se-me-sets::           South European and Middle East Character Sets
* charset-baltic-sets::          Baltic Character Sets
* charset-cyrillic-sets::        Cyrillic Character Sets
* charset-asian-sets::           Asian Character Sets

MySQL supports 70+ collations for 30+ character sets. This section
indicates which character sets MySQL supports. There is one subsection
for each group of related character sets. For each character set, the
permissible collations are listed.

You can always list the available character sets and their default
collations with the *Note `SHOW CHARACTER SET': show-character-set.
statement:

     mysql> SHOW CHARACTER SET;
     +----------+-----------------------------+---------------------+
     | Charset  | Description                 | Default collation   |
     +----------+-----------------------------+---------------------+
     | big5     | Big5 Traditional Chinese    | big5_chinese_ci     |
     | dec8     | DEC West European           | dec8_swedish_ci     |
     | cp850    | DOS West European           | cp850_general_ci    |
     | hp8      | HP West European            | hp8_english_ci      |
     | koi8r    | KOI8-R Relcom Russian       | koi8r_general_ci    |
     | latin1   | cp1252 West European        | latin1_swedish_ci   |
     | latin2   | ISO 8859-2 Central European | latin2_general_ci   |
     | swe7     | 7bit Swedish                | swe7_swedish_ci     |
     | ascii    | US ASCII                    | ascii_general_ci    |
     | ujis     | EUC-JP Japanese             | ujis_japanese_ci    |
     | sjis     | Shift-JIS Japanese          | sjis_japanese_ci    |
     | hebrew   | ISO 8859-8 Hebrew           | hebrew_general_ci   |
     | tis620   | TIS620 Thai                 | tis620_thai_ci      |
     | euckr    | EUC-KR Korean               | euckr_korean_ci     |
     | koi8u    | KOI8-U Ukrainian            | koi8u_general_ci    |
     | gb2312   | GB2312 Simplified Chinese   | gb2312_chinese_ci   |
     | greek    | ISO 8859-7 Greek            | greek_general_ci    |
     | cp1250   | Windows Central European    | cp1250_general_ci   |
     | gbk      | GBK Simplified Chinese      | gbk_chinese_ci      |
     | latin5   | ISO 8859-9 Turkish          | latin5_turkish_ci   |
     | armscii8 | ARMSCII-8 Armenian          | armscii8_general_ci |
     | utf8     | UTF-8 Unicode               | utf8_general_ci     |
     | ucs2     | UCS-2 Unicode               | ucs2_general_ci     |
     | cp866    | DOS Russian                 | cp866_general_ci    |
     | keybcs2  | DOS Kamenicky Czech-Slovak  | keybcs2_general_ci  |
     | macce    | Mac Central European        | macce_general_ci    |
     | macroman | Mac West European           | macroman_general_ci |
     | cp852    | DOS Central European        | cp852_general_ci    |
     | latin7   | ISO 8859-13 Baltic          | latin7_general_ci   |
     | utf8mb4  | UTF-8 Unicode               | utf8mb4_general_ci  |
     | cp1251   | Windows Cyrillic            | cp1251_general_ci   |
     | utf16    | UTF-16 Unicode              | utf16_general_ci    |
     | cp1256   | Windows Arabic              | cp1256_general_ci   |
     | cp1257   | Windows Baltic              | cp1257_general_ci   |
     | utf32    | UTF-32 Unicode              | utf32_general_ci    |
     | binary   | Binary pseudo charset       | binary              |
     | geostd8  | GEOSTD8 Georgian            | geostd8_general_ci  |
     | cp932    | SJIS for Windows Japanese   | cp932_japanese_ci   |
     | eucjpms  | UJIS for Windows Japanese   | eucjpms_japanese_ci |
     +----------+-----------------------------+---------------------+

The `utf8mb4', `utf16', and `utf32' character sets were added in MySQL
5.5.3.

In cases where a character set has multiple collations, it might not be
clear which collation is most suitable for a given application. To
avoid choosing the wrong collation, it can be helpful to perform some
comparisons with representative data values to make sure that a given
collation sorts values the way you expect.

Collation-Charts.Org (http://www.collation-charts.org/) is a useful
site for information that shows how one collation compares to another.


File: manual.info,  Node: charset-unicode-sets,  Next: charset-we-sets,  Prev: charset-charsets,  Up: charset-charsets

10.1.14.1 Unicode Character Sets
................................

MySQL 5.5 supports these Unicode character sets:

   * `ucs2', the UCS-2 encoding of the Unicode character set using 16
     bits per character.

   * `utf16', the UTF-16 encoding for the Unicode character set; like
     `ucs2' but with an extension for supplementary characters.

   * `utf32', the UTF-32 encoding for the Unicode character set using
     32 bits per character.

   * `utf8', a UTF-8 encoding of the Unicode character set using one to
     three bytes per character.

   * `utf8mb4', a UTF-8 encoding of the Unicode character set using one
     to four bytes per character.

`ucs2' and `utf8' support Basic Multilingual Plane (BMP) characters.
`utf8mb4', `utf16', and `utf32' support BMP and supplementary
characters. The `utf8mb4', `utf16', and `utf32' character sets were
added in MySQL 5.5.3.

You can store text in about 650 languages using these character sets.
This section lists the collations available for each Unicode character
set and describes their differentiating properties. For general
information about the character sets, see *Note charset-unicode::.

A similar set of collations is available for each Unicode character
set. These are shown in the following list, where XXX represents the
character set name. For example, `XXX_danish_ci' represents the Danish
collations, the specific names of which are `ucs2_danish_ci',
`utf16_danish_ci', `utf32_danish_ci', `utf8_danish_ci', and
`utf8mb4_danish_ci'.

   * `XXX_bin'

   * `XXX_czech_ci'

   * `XXX_danish_ci'

   * `XXX_esperanto_ci'

   * `XXX_estonian_ci'

   * `XXX_general_ci' (default)

   * `XXX_general_mysql500_ci'

   * `XXX_hungarian_ci'

   * `XXX_icelandic_ci'

   * `XXX_latvian_ci'

   * `XXX_lithuanian_ci'

   * `XXX_persian_ci'

   * `XXX_polish_ci'

   * `XXX_roman_ci'

   * `XXX_romanian_ci'

   * `XXX_sinhala_ci'

   * `XXX_slovak_ci'

   * `XXX_slovenian_ci'

   * `XXX_spanish_ci'

   * `XXX_spanish2_ci'

   * `XXX_swedish_ci'

   * `XXX_turkish_ci'

   * `XXX_unicode_ci'

MySQL implements the `XXX_unicode_ci' collations according to the
Unicode Collation Algorithm (UCA) described at
`http://www.unicode.org/reports/tr10/'. The collation uses the
version-4.0.0 UCA weight keys:
`http://www.unicode.org/Public/UCA/4.0.0/allkeys-4.0.0.txt'.
Currently, the `XXX_unicode_ci' collations have only partial support
for the Unicode Collation Algorithm. Some characters are not supported
yet. Also, combining marks are not fully supported. This affects
primarily Vietnamese, Yoruba, and some smaller languages such as Navajo.

MySQL implements language-specific Unicode collations only if the
ordering with `XXX_unicode_ci' does not work well for a language.
Language-specific collations are UCA-based. They are derived from
`XXX_unicode_ci' with additional language tailoring rules.

For any Unicode character set, operations performed using the
`XXX_general_ci' collation are faster than those for the
`XXX_unicode_ci' collation. For example, comparisons for the
`utf8_general_ci' collation are faster, but slightly less correct, than
comparisons for `utf8_unicode_ci'. The reason for this is that
`utf8_unicode_ci' supports mappings such as expansions; that is, when
one character compares as equal to combinations of other characters.
For example, in German and some other languages ``ss'' is equal to
``ss''.  `utf8_unicode_ci' also supports contractions and ignorable
characters. `utf8_general_ci' is a legacy collation that does not
support expansions, contractions, or ignorable characters. It can make
only one-to-one comparisons between characters.

To further illustrate, the following equalities hold in both
`utf8_general_ci' and `utf8_unicode_ci' (for the effect this has in
comparisons or when doing searches, see *Note
charset-collation-effect::):

     A" = A
     O" = O
     U" = U

A difference between the collations is that this is true for
`utf8_general_ci':

     ss = s

Whereas this is true for `utf8_unicode_ci', which supports the German
DIN-1 ordering (also known as dictionary order):

     ss = ss

MySQL implements language-specific collations for the `utf8' character
set only if the ordering with `utf8_unicode_ci' does not work well for
a language. For example, `utf8_unicode_ci' works fine for German
dictionary order and French, so there is no need to create special
`utf8' collations.

`utf8_general_ci' also is satisfactory for both German and French,
except that ``ss'' is equal to ``s'', and not to ``ss''. If this is
acceptable for your application, you should use `utf8_general_ci'
because it is faster.  Otherwise, use `utf8_unicode_ci' because it is
more accurate.

`XXX_swedish_ci' includes Swedish rules. For example, in Swedish, the
following relationship holds, which is not something expected by a
German or French speaker:

     U" = Y < O"

The `XXX_spanish_ci' and `XXX_spanish2_ci' collations correspond to
modern Spanish and traditional Spanish, respectively. In both
collations, ``ñ'' (n-tilde) is a separate letter between ``n'' and
``o''. In addition, for traditional Spanish, ``ch'' is a separate
letter between ``c'' and ``d'', and ``ll'' is a separate letter between
``l'' and ``m''

In the `XXX_roman_ci' collations, `I' and `J' compare as equal, and `U'
and `V' compare as equal.

For all Unicode collations except the `binary' (`XXX_bin') collations,
MySQL performs a table lookup to find a character's collating weight.
If a character is not in the table (for example, because it is a `new'
character), collating weight determination becomes more complex:

   * For BMP characters in general collations (`XXX_general_ci'),
     weight = code point.

   * For BMP characters in UCA collations (for example, `XXX_unicode_ci'
     and language-specific collations), the following algorithm applies:

          if (code >= 0x3400 && code <= 0x4DB5)
            base= 0xFB80; /* CJK Ideograph Extension */
          else if (code >= 0x4E00 && code <= 0x9FA5)
            base= 0xFB40; /* CJK Ideograph */
          else
            base= 0xFBC0; /* All other characters */
          aaaa= base +  (code >> 15);
          bbbb= (code & 0x7FFF) | 0x8000;

     The result is a sequence of two collating elements, `aaaa'
     followed by `bbbb'.

     Thus, `U+04cf CYRILLIC SMALL LETTER PALOCHKA' currently is, with
     all UCA collations, greater than `U+04c0 CYRILLIC LETTER
     PALOCHKA'. Eventually, after further collation tuning, all
     palochkas will sort together.

   * For supplementary characters in general collations, the weight is
     the weight for `0xfffd REPLACEMENT CHARACTER'. For supplementary
     characters in UCA collations, their collating weight is `0xfffd'.
     That is, to MySQL, all supplementary characters are equal to each
     other, and greater than almost all BMP characters.

     An example with Deseret characters and `COUNT(DISTINCT)':

          CREATE TABLE t (s1 VARCHAR(5) CHARACTER SET utf32 COLLATE utf32_unicode_ci);
          INSERT INTO t VALUES (0xfffd);   /* REPLACEMENT CHARACTER */
          INSERT INTO t VALUES (0x010412); /* DESERET CAPITAL LETTER BEE */
          INSERT INTO t VALUES (0x010413); /* DESERET CAPITAL LETTER TEE */
          SELECT COUNT(DISTINCT s1) FROM t;

     The result is 2 because in the MySQL `XXX_unicode_ci' collations,
     the replacement character has a weight of `0x0dc6', whereas
     Deseret Bee and Deseret Tee both have a weight of `0xfffd'. (Were
     the `utf32_general_ci' collation used instead, the result would be
     1 because all three characters have a weight of `0xfffd' in that
     collation.)

The current rule that all supplementary characters are equal to each
other is nonoptimal but is not expected to cause trouble. These
characters are very rare, so it will be very rare that a
multi-character string consists entirely of supplementary characters.
In Japan, since the supplementary characters are obscure Kanji
ideographs, the typical user does not care what order they are in,
anyway. If you really want rows sorted by MySQL's rule and secondarily
by code point value, it is easy:

     ORDER BY s1 COLLATE utf32_unicode_ci, s1 COLLATE utf32_bin

*The `utf16_bin' Collation*

There is a difference between `ordering by the character's code value'
and `ordering by the character's binary representation,' a difference
that appears only with `utf16_bin', because of surrogates.

Suppose that `utf16_bin' (the binary collation for `utf16') was a binary
comparison `byte by byte' rather than `character by character.' If that
were so, the order of characters in `utf16_bin' would differ from the
order in `utf8_bin'. For example, the following chart shows two rare
characters. The first character is in the range `E000'-`FFFF', so it is
greater than a surrogate but less than a supplementary. The second
character is a supplementary.

     Code point  Character                    utf8         utf16
     ----------  ---------                    ----         -----
     0FF9D       HALFWIDTH KATAKANA LETTER N  EF BE 9D     FF 9D
     10384       UGARITIC LETTER DELTA        F0 90 8E 84  D8 00 DF 84

The two characters in the chart are in order by code point value
because `0xff9d' < `0x10384'. And they are in order by `utf8' value
because `0xef' < `0xf0'. But they are not in order by `utf16' value, if
we use byte-by-byte comparison, because `0xff' > `0xd8'.

So MySQL's `utf16_bin' collation is not `byte by byte.' It is `by code
point.' When MySQL sees a supplementary-character encoding in `utf16',
it converts to the character's code-point value, and then compares.
Therefore, `utf8_bin' and `utf16_bin' are the same ordering. This is
consistent with the SQL:2008 standard requirement for a UCS_BASIC
collation: `UCS_BASIC is a collation in which the ordering is
determined entirely by the Unicode scalar values of the characters in
the strings being sorted. It is applicable to the UCS character
repertoire. Since every character repertoire is a subset of the UCS
repertoire, the UCS_BASIC collation is potentially applicable to every
character set. NOTE 11: The Unicode scalar value of a character is its
code point treated as an unsigned integer.'

If the character set is `ucs2', comparison is byte-by-byte, but `ucs2'
strings should not contain surrogates, anyway.

The `XXX_general_mysql500_ci' collations were added in MySQL 5.5.21.
They preserve the pre-5.1.24 ordering of the original `XXX_general_ci'
collations and permit upgrades for tables created before MySQL 5.1.24.
For more information, see *Note checking-table-incompatibilities::, and
*Note rebuilding-tables::.

For additional information about Unicode collations in MySQL, see
Collation-Charts.Org (utf8
(http://www.collation-charts.org/mysql60/by-charset.html#utf8)).


File: manual.info,  Node: charset-we-sets,  Next: charset-ce-sets,  Prev: charset-unicode-sets,  Up: charset-charsets

10.1.14.2 West European Character Sets
......................................

Western European character sets cover most West European languages,
such as French, Spanish, Catalan, Basque, Portuguese, Italian,
Albanian, Dutch, German, Danish, Swedish, Norwegian, Finnish, Faroese,
Icelandic, Irish, Scottish, and English.

   * `ascii' (US ASCII) collations:

        * `ascii_bin'

        * `ascii_general_ci' (default)

   * `cp850' (DOS West European) collations:

        * `cp850_bin'

        * `cp850_general_ci' (default)

   * `dec8' (DEC Western European) collations:

        * `dec8_bin'

        * `dec8_swedish_ci' (default)

   * `hp8' (HP Western European) collations:

        * `hp8_bin'

        * `hp8_english_ci' (default)

   * `latin1' (cp1252 West European) collations:

        * `latin1_bin'

        * `latin1_danish_ci'

        * `latin1_general_ci'

        * `latin1_general_cs'

        * `latin1_german1_ci'

        * `latin1_german2_ci'

        * `latin1_spanish_ci'

        * `latin1_swedish_ci' (default)

     `latin1' is the default character set.  MySQL's `latin1' is the
     same as the Windows `cp1252' character set. This means it is the
     same as the official `ISO 8859-1' or IANA (Internet Assigned
     Numbers Authority) `latin1', except that IANA `latin1' treats the
     code points between `0x80' and `0x9f' as `undefined,' whereas
     `cp1252', and therefore MySQL's `latin1', assign characters for
     those positions. For example, `0x80' is the Euro sign. For the
     `undefined' entries in `cp1252', MySQL translates `0x81' to Unicode
     `0x0081', `0x8d' to `0x008d', `0x8f' to `0x008f', `0x90' to
     `0x0090', and `0x9d' to `0x009d'.

     The `latin1_swedish_ci' collation is the default that probably is
     used by the majority of MySQL customers. Although it is frequently
     said that it is based on the Swedish/Finnish collation rules,
     there are Swedes and Finns who disagree with this statement.

     The `latin1_german1_ci' and `latin1_german2_ci' collations are
     based on the DIN-1 and DIN-2 standards, where DIN stands for
     _Deutsches Institut fu"r Normung_ (the German equivalent of ANSI).
     DIN-1 is called the `dictionary collation' and DIN-2 is called the
     `phone book collation.' For an example of the effect this has in
     comparisons or when doing searches, see *Note
     charset-collation-effect::.

        * `latin1_german1_ci' (dictionary) rules:

               A" = A
               O" = O
               U" = U
               ss = s

        * `latin1_german2_ci' (phone-book) rules:

               A" = AE
               O" = OE
               U" = UE
               ss = ss

     In the `latin1_spanish_ci' collation, ``ñ'' (n-tilde) is a
     separate letter between ``n'' and ``o''.

   * `macroman' (Mac West European) collations:

        * `macroman_bin'

        * `macroman_general_ci' (default)

   * `swe7' (7bit Swedish) collations:

        * `swe7_bin'

        * `swe7_swedish_ci' (default)

For additional information about Western European collations in MySQL,
see Collation-Charts.Org (ascii
(http://www.collation-charts.org/mysql60/by-charset.html#ascii), cp850
(http://www.collation-charts.org/mysql60/by-charset.html#cp850), dec8
(http://www.collation-charts.org/mysql60/by-charset.html#dec8), hp8
(http://www.collation-charts.org/mysql60/by-charset.html#hp8), latin1
(http://www.collation-charts.org/mysql60/by-charset.html#latin1),
macroman
(http://www.collation-charts.org/mysql60/by-charset.html#macroman),
swe7 (http://www.collation-charts.org/mysql60/by-charset.html#swe7)).


File: manual.info,  Node: charset-ce-sets,  Next: charset-se-me-sets,  Prev: charset-we-sets,  Up: charset-charsets

10.1.14.3 Central European Character Sets
.........................................

MySQL provides some support for character sets used in the Czech
Republic, Slovakia, Hungary, Romania, Slovenia, Croatia, Poland, and
Serbia (Latin).

   * `cp1250' (Windows Central European) collations:

        * `cp1250_bin'

        * `cp1250_croatian_ci'

        * `cp1250_czech_cs'

        * `cp1250_general_ci' (default)

        * `cp1250_polish_ci'

   * `cp852' (DOS Central European) collations:

        * `cp852_bin'

        * `cp852_general_ci' (default)

   * `keybcs2' (DOS Kamenicky Czech-Slovak) collations:

        * `keybcs2_bin'

        * `keybcs2_general_ci' (default)

   * `latin2' (ISO 8859-2 Central European) collations:

        * `latin2_bin'

        * `latin2_croatian_ci'

        * `latin2_czech_cs'

        * `latin2_general_ci' (default)

        * `latin2_hungarian_ci'

   * `macce' (Mac Central European) collations:

        * `macce_bin'

        * `macce_general_ci' (default)

For additional information about Central European collations in MySQL,
see Collation-Charts.Org (cp1250
(http://www.collation-charts.org/mysql60/by-charset.html#cp1250), cp852
(http://www.collation-charts.org/mysql60/by-charset.html#cp852),
keybcs2
(http://www.collation-charts.org/mysql60/by-charset.html#keybcs2),
latin2 (http://www.collation-charts.org/mysql60/by-charset.html#latin2),
macce (http://www.collation-charts.org/mysql60/by-charset.html#macce)).


File: manual.info,  Node: charset-se-me-sets,  Next: charset-baltic-sets,  Prev: charset-ce-sets,  Up: charset-charsets

10.1.14.4 South European and Middle East Character Sets
.......................................................

South European and Middle Eastern character sets supported by MySQL
include Armenian, Arabic, Georgian, Greek, Hebrew, and Turkish.

   * `armscii8' (ARMSCII-8 Armenian) collations:

        * `armscii8_bin'

        * `armscii8_general_ci' (default)

   * `cp1256' (Windows Arabic) collations:

        * `cp1256_bin'

        * `cp1256_general_ci' (default)

   * `geostd8' (GEOSTD8 Georgian) collations:

        * `geostd8_bin'

        * `geostd8_general_ci' (default)

   * `greek' (ISO 8859-7 Greek) collations:

        * `greek_bin'

        * `greek_general_ci' (default)

   * `hebrew' (ISO 8859-8 Hebrew) collations:

        * `hebrew_bin'

        * `hebrew_general_ci' (default)

   * `latin5' (ISO 8859-9 Turkish) collations:

        * `latin5_bin'

        * `latin5_turkish_ci' (default)

For additional information about South European and Middle Eastern
collations in MySQL, see Collation-Charts.Org (armscii8
(http://www.collation-charts.org/mysql60/by-charset.html#armscii8),
cp1256 (http://www.collation-charts.org/mysql60/by-charset.html#cp1256),
geostd8
(http://www.collation-charts.org/mysql60/by-charset.html#geostd8),
greek (http://www.collation-charts.org/mysql60/by-charset.html#greek),
hebrew (http://www.collation-charts.org/mysql60/by-charset.html#hebrew),
latin5
(http://www.collation-charts.org/mysql60/by-charset.html#latin5)).


File: manual.info,  Node: charset-baltic-sets,  Next: charset-cyrillic-sets,  Prev: charset-se-me-sets,  Up: charset-charsets

10.1.14.5 Baltic Character Sets
...............................

The Baltic character sets cover Estonian, Latvian, and Lithuanian
languages.

   * `cp1257' (Windows Baltic) collations:

        * `cp1257_bin'

        * `cp1257_general_ci' (default)

        * `cp1257_lithuanian_ci'

   * `latin7' (ISO 8859-13 Baltic) collations:

        * `latin7_bin'

        * `latin7_estonian_cs'

        * `latin7_general_ci' (default)

        * `latin7_general_cs'

For additional information about Baltic collations in MySQL, see
Collation-Charts.Org (cp1257
(http://www.collation-charts.org/mysql60/by-charset.html#cp1257),
latin7
(http://www.collation-charts.org/mysql60/by-charset.html#latin7)).


File: manual.info,  Node: charset-cyrillic-sets,  Next: charset-asian-sets,  Prev: charset-baltic-sets,  Up: charset-charsets

10.1.14.6 Cyrillic Character Sets
.................................

The Cyrillic character sets and collations are for use with Belarusian,
Bulgarian, Russian, Ukrainian, and Serbian (Cyrillic) languages.

   * `cp1251' (Windows Cyrillic) collations:

        * `cp1251_bin'

        * `cp1251_bulgarian_ci'

        * `cp1251_general_ci' (default)

        * `cp1251_general_cs'

        * `cp1251_ukrainian_ci'

   * `cp866' (DOS Russian) collations:

        * `cp866_bin'

        * `cp866_general_ci' (default)

   * `koi8r' (KOI8-R Relcom Russian) collations:

        * `koi8r_bin'

        * `koi8r_general_ci' (default)

   * `koi8u' (KOI8-U Ukrainian) collations:

        * `koi8u_bin'

        * `koi8u_general_ci' (default)

For additional information about Cyrillic collations in MySQL, see
Collation-Charts.Org (cp1251
(http://www.collation-charts.org/mysql60/by-charset.html#cp1251), cp866
(http://www.collation-charts.org/mysql60/by-charset.html#cp866), koi8r
(http://www.collation-charts.org/mysql60/by-charset.html#koi8r), koi8u
(http://www.collation-charts.org/mysql60/by-charset.html#koi8u)).  ).


File: manual.info,  Node: charset-asian-sets,  Prev: charset-cyrillic-sets,  Up: charset-charsets

10.1.14.7 Asian Character Sets
..............................

* Menu:

* charset-cp932::                The `cp932' Character Set

The Asian character sets that we support include Chinese, Japanese,
Korean, and Thai. These can be complicated. For example, the Chinese
sets must allow for thousands of different characters. See *Note
charset-cp932::, for additional information about the `cp932' and
`sjis' character sets.

For answers to some common questions and problems relating support for
Asian character sets in MySQL, see *Note faqs-cjk::.

   * `big5' (Big5 Traditional Chinese) collations:

        * `big5_bin'

        * `big5_chinese_ci' (default)

   * `cp932' (SJIS for Windows Japanese) collations:

        * `cp932_bin'

        * `cp932_japanese_ci' (default)

   * `eucjpms' (UJIS for Windows Japanese) collations:

        * `eucjpms_bin'

        * `eucjpms_japanese_ci' (default)

   * `euckr' (EUC-KR Korean) collations:

        * `euckr_bin'

        * `euckr_korean_ci' (default)

   * `gb2312' (GB2312 Simplified Chinese) collations:

        * `gb2312_bin'

        * `gb2312_chinese_ci' (default)

   * `gbk' (GBK Simplified Chinese) collations:

        * `gbk_bin'

        * `gbk_chinese_ci' (default)

   * `sjis' (Shift-JIS Japanese) collations:

        * `sjis_bin'

        * `sjis_japanese_ci' (default)

   * `tis620' (TIS620 Thai) collations:

        * `tis620_bin'

        * `tis620_thai_ci' (default)

   * `ujis' (EUC-JP Japanese) collations:

        * `ujis_bin'

        * `ujis_japanese_ci' (default)

The `big5_chinese_ci' collation sorts on number of strokes.

For additional information about Asian collations in MySQL, see
Collation-Charts.Org (big5
(http://www.collation-charts.org/mysql60/by-charset.html#big5), cp932
(http://www.collation-charts.org/mysql60/by-charset.html#cp932),
eucjpms
(http://www.collation-charts.org/mysql60/by-charset.html#eucjpms),
euckr (http://www.collation-charts.org/mysql60/by-charset.html#euckr),
gb2312 (http://www.collation-charts.org/mysql60/by-charset.html#gb2312),
gbk (http://www.collation-charts.org/mysql60/by-charset.html#gbk), sjis
(http://www.collation-charts.org/mysql60/by-charset.html#sjis), tis620
(http://www.collation-charts.org/mysql60/by-charset.html#tis620), ujis
(http://www.collation-charts.org/mysql60/by-charset.html#ujis)).


File: manual.info,  Node: charset-cp932,  Prev: charset-asian-sets,  Up: charset-asian-sets

10.1.14.8 The `cp932' Character Set
...................................

*Why is `cp932' needed?*

In MySQL, the `sjis' character set corresponds to the `Shift_JIS'
character set defined by IANA, which supports JIS X0201 and JIS X0208
characters. (See `http://www.iana.org/assignments/character-sets'.)

However, the meaning of `SHIFT JIS' as a descriptive term has become
very vague and it often includes the extensions to `Shift_JIS' that are
defined by various vendors.

For example, `SHIFT JIS' used in Japanese Windows environments is a
Microsoft extension of `Shift_JIS' and its exact name is `Microsoft
Windows Codepage : 932' or `cp932'. In addition to the characters
supported by `Shift_JIS', `cp932' supports extension characters such as
NEC special characters, NEC selected--IBM extended characters, and IBM
selected characters.

Many Japanese users have experienced problems using these extension
characters. These problems stem from the following factors:

   * MySQL automatically converts character sets.

   * Character sets are converted using Unicode (`ucs2').

   * The `sjis' character set does not support the conversion of these
     extension characters.

   * There are several conversion rules from so-called `SHIFT JIS' to
     Unicode, and some characters are converted to Unicode differently
     depending on the conversion rule. MySQL supports only one of these
     rules (described later).

The MySQL `cp932' character set is designed to solve these problems.

Because MySQL supports character set conversion, it is important to
separate IANA `Shift_JIS' and `cp932' into two different character sets
because they provide different conversion rules.

*How does `cp932' differ from `sjis'?*

The `cp932' character set differs from `sjis' in the following ways:

   * `cp932' supports NEC special characters, NEC selected--IBM
     extended characters, and IBM selected characters.

   * Some `cp932' characters have two different code points, both of
     which convert to the same Unicode code point. When converting from
     Unicode back to `cp932', one of the code points must be selected.
     For this `round trip conversion,' the rule recommended by
     Microsoft is used. (See
     `http://support.microsoft.com/kb/170559/EN-US/'.)

     The conversion rule works like this:

        * If the character is in both JIS X 0208 and NEC special
          characters, use the code point of JIS X 0208.

        * If the character is in both NEC special characters and IBM
          selected characters, use the code point of NEC special
          characters.

        * If the character is in both IBM selected characters and NEC
          selected--IBM extended characters, use the code point of IBM
          extended characters.

     The table shown at
     `http://www.microsoft.com/globaldev/reference/dbcs/932.htm'
     provides information about the Unicode values of `cp932'
     characters. For `cp932' table entries with characters under which
     a four-digit number appears, the number represents the
     corresponding Unicode (`ucs2') encoding. For table entries with an
     underlined two-digit value appears, there is a range of `cp932'
     character values that begin with those two digits. Clicking such a
     table entry takes you to a page that displays the Unicode value for
     each of the `cp932' characters that begin with those digits.

     The following links are of special interest. They correspond to
     the encodings for the following sets of characters:

        * NEC special characters:

               `http://www.microsoft.com/globaldev/reference/dbcs/932/932_87.htm'

        * NEC selected--IBM extended characters:

               `http://www.microsoft.com/globaldev/reference/dbcs/932/932_ED.htm'
               `http://www.microsoft.com/globaldev/reference/dbcs/932/932_EE.htm'

        * IBM selected characters:

               `http://www.microsoft.com/globaldev/reference/dbcs/932/932_FA.htm'
               `http://www.microsoft.com/globaldev/reference/dbcs/932/932_FB.htm'
               `http://www.microsoft.com/globaldev/reference/dbcs/932/932_FC.htm'

   * `cp932' supports conversion of user-defined characters in
     combination with `eucjpms', and solves the problems with
     `sjis'/`ujis' conversion. For details, please refer to
     `http://www.opengroup.or.jp/jvc/cde/sjis-euc-e.html'.

For some characters, conversion to and from `ucs2' is different for
`sjis' and `cp932'. The following tables illustrate these differences.

Conversion to `ucs2':

This table lists `sjis'/`cp932' values and shows the difference between
`sjis' to `ucs2' conversion and `cp932' to `ucs2' conversion.

`sjis'/`cp932' Value     `sjis' -> `ucs2'         `cp932' -> `ucs2'
                         Conversion               Conversion
5C                       005C                     005C
7E                       007E                     007E
815C                     2015                     2015
815F                     005C                     FF3C
8160                     301C                     FF5E
8161                     2016                     2225
817C                     2212                     FF0D
8191                     00A2                     FFE0
8192                     00A3                     FFE1
81CA                     00AC                     FFE2

Conversion from `ucs2':

This table lists `ucs2' values and shows the difference between `ucs2'
to `sjis' conversion and `ucs2' to `cp932' conversion.

`ucs2' value             `ucs2' -> `sjis'         `ucs2' -> `cp932'
                         Conversion               Conversion
005C                     815F                     5C
007E                     7E                       7E
00A2                     8191                     3F
00A3                     8192                     3F
00AC                     81CA                     3F
2015                     815C                     815C
2016                     8161                     3F
2212                     817C                     3F
2225                     3F                       8161
301C                     8160                     3F
FF0D                     3F                       817C
FF3C                     3F                       815F
FF5E                     3F                       8160
FFE0                     3F                       8191
FFE1                     3F                       8192
FFE2                     3F                       81CA

Users of any Japanese character sets should be aware that using
`--character-set-client-handshake' (or
`--skip-character-set-client-handshake') has an important effect. See
*Note server-options::.


File: manual.info,  Node: error-message-language,  Next: adding-character-set,  Prev: charset,  Up: globalization

10.2 Setting the Error Message Language
=======================================

By default, *Note `mysqld': mysqld. produces error messages in English,
but they can also be displayed in any of several other languages:
Czech, Danish, Dutch, Estonian, French, German, Greek, Hungarian,
Italian, Japanese, Korean, Norwegian, Norwegian-ny, Polish, Portuguese,
Romanian, Russian, Slovak, Spanish, or Swedish.

You can select which language the server uses for error messages using
the instructions in this section.

As of MySQL 5.5, the server searches for the error message file in two
locations:

   * It tries to find the file in a directory constructed from two
     system variable values, `lc_messages_dir' and `lc_messages', with
     the latter converted to a language name. Suppose that you start the
     server using this command:

          shell> mysqld --lc_messages_dir=/usr/share/mysql --lc_messages=fr_FR

     In this case, *Note `mysqld': mysqld. maps the locale `fr_FR' to
     the language `french' and looks for the error file in the
     `/usr/share/mysql/french' directory.

   * If the message file cannot be found in the directory constructed
     as just described, the server ignores the `lc_messages' value and
     uses only the `lc_messages_dir' value as the location in which to
     look.

The `lc_messages_dir' system variable has only a global value and is
read only.  `lc_messages' has global and session values and can be
modified at runtime, so the error message language can be changed while
the server is running, and individual clients each can have a different
error message language by changing their session `lc_messages' value to
a different locale name. For example, if the server is using the
`fr_FR' locale for error messages, a client can execute this statement
to receive error messages in English:

     mysql> SET lc_messages = 'en_US';

Before MySQL 5.5, the `lc_messages_dir' and `lc_messages' system
variables were unavailable. To start *Note `mysqld': mysqld. with a
particular language for error messages, the `--language' or `-L' option
were used. The option value can be a language name or the full path to
the error message file. For example:

     shell> mysqld --language=french

Or:

     shell> mysqld --language=/usr/local/share/french

Specify the language name in lowercase.

MySQL 5.5 treats `--language' as an alias for `lc_messages_dir'.

By default, the language files are located in the `share/mysql/LANGUAGE'
directory under the MySQL base directory.

For information about changing the character set for error messages
(rather than the language), see *Note charset-errors::.

You can change the content of the error messages produced by the server
using the instructions in the MySQL Internals manual, available at
MySQL Internals: Error Messages
(http://dev.mysql.com/doc/internals/en/error-messages.html). If you do
change the content of error messages, remember to repeat your changes
after each upgrade to a newer version of MySQL.


File: manual.info,  Node: adding-character-set,  Next: adding-collation,  Prev: error-message-language,  Up: globalization

10.3 Adding a Character Set
===========================

* Menu:

* character-arrays::             Character Definition Arrays
* string-collating::             String Collating Support for Complex Character Sets
* multi-byte-characters::        Multi-Byte Character Support for Complex Character Sets

This section discusses the procedure for adding a character set to
MySQL. The proper procedure depends on whether the character set is
simple or complex:

   * If the character set does not need special string collating
     routines for sorting and does not need multi-byte character
     support, it is simple.

   * If the character set needs either of those features, it is complex.

For example, `greek' and `swe7' are simple character sets, whereas
`big5' and `czech' are complex character sets.

To use the following instructions, you must have a MySQL source
distribution. In the instructions, MYSET represents the name of the
character set that you want to add.

  1. Add a `<charset>' element for MYSET to the
     `sql/share/charsets/Index.xml' file. Use the existing contents in
     the file as a guide to adding new contents. A partial listing for
     the `latin1' `<charset>' element follows:

          <charset name="latin1">
            <family>Western</family>
            <description>cp1252 West European</description>
            ...
            <collation name="latin1_swedish_ci" id="8" order="Finnish, Swedish">
              <flag>primary</flag>
              <flag>compiled</flag>
            </collation>
            <collation name="latin1_danish_ci" id="15" order="Danish"/>
            ...
            <collation name="latin1_bin" id="47" order="Binary">
              <flag>binary</flag>
              <flag>compiled</flag>
            </collation>
            ...
          </charset>

     The `<charset>' element must list all the collations for the
     character set. These must include at least a binary collation and
     a default (primary) collation.  The default collation is often
     named using a suffix of `general_ci' (general, case insensitive).
     It is possible for the binary collation to be the default
     collation, but usually they are different. The default collation
     should have a `primary' flag. The binary collation should have a
     `binary' flag.

     You must assign a unique ID number to each collation. The range of
     IDs from 1024 to 2047 is reserved for user-defined collations.
     Before MySQL 5.5, the ID must be chosen from the range 1 to 254.
     To find the maximum of the currently used collation IDs, use this
     query:

          SELECT MAX(ID) FROM INFORMATION_SCHEMA.COLLATIONS;

  2. This step depends on whether you are adding a simple or complex
     character set. A simple character set requires only a
     configuration file, whereas a complex character set requires C
     source file that defines collation functions, multi-byte
     functions, or both.

     For a simple character set, create a configuration file,
     `MYSET.xml', that describes the character set properties. Create
     this file in the `sql/share/charsets' directory. You can use a
     copy of `latin1.xml' as the basis for this file. The syntax for
     the file is very simple:

        * Comments are written as ordinary XML comments (`<!-- TEXT
          -->').

        * Words within `<map>' array elements are separated by
          arbitrary amounts of whitespace.

        * Each word within `<map>' array elements must be a number in
          hexadecimal format.

        * The `<map>' array element for the `<ctype>' element has 257
          words.  The other `<map>' array elements after that have 256
          words. See *Note character-arrays::.

        * For each collation listed in the `<charset>' element for the
          character set in `Index.xml', `MYSET.xml' must contain a
          `<collation>' element that defines the character ordering.

     For a complex character set, create a C source file that describes
     the character set properties and defines the support routines
     necessary to properly perform operations on the character set:

        * Create the file `ctype-MYSET.c' in the `strings' directory.
          Look at one of the existing `ctype-*.c' files (such as
          `ctype-big5.c') to see what needs to be defined. The arrays
          in your file must have names like `ctype_MYSET',
          `to_lower_MYSET', and so on. These correspond to the arrays
          for a simple character set. See *Note character-arrays::.

        * For each `<collation>' element listed in the `<charset>'
          element for the character set in `Index.xml', the
          `ctype-MYSET.c' file must provide an implementation of the
          collation.

        * If the character set requires string collating functions, see
          *Note string-collating::.

        * If the character set requires multi-byte character support,
          see *Note multi-byte-characters::.

  3. Modify the configuration information. Use the existing
     configuration information as a guide to adding information for
     MYSYS. The example here assumes that the character set has default
     and binary collations, but more lines are needed if MYSET has
     additional collations.

       1. Edit `mysys/charset-def.c', and `register' the collations for
          the new character set.

          Add these lines to the `declaration' section:

               #ifdef HAVE_CHARSET_MYSET
               extern CHARSET_INFO my_charset_MYSET_general_ci;
               extern CHARSET_INFO my_charset_MYSET_bin;
               #endif

          Add these lines to the `registration' section:

               #ifdef HAVE_CHARSET_MYSET
                 add_compiled_collation(&my_charset_MYSET_general_ci);
                 add_compiled_collation(&my_charset_MYSET_bin);
               #endif

       2. If the character set uses `ctype-MYSET.c', edit
          `strings/CMakeLists.txt' and add `ctype-MYSET.c' to the
          definition of the `STRINGS_SOURCES' variable.

       3. Edit `cmake/character_sets.cmake':

            1. Add MYSET to the value of with `CHARSETS_AVAILABLE' in
               alphabetic order.

            2. Add MYSET to the value of `CHARSETS_COMPLEX' in
               alphabetic order. This is needed even for simple
               character sets, or `CMake' will not recognize
               `-DDEFAULT_CHARSET=MYSET'.

  4. Reconfigure, recompile, and test.


File: manual.info,  Node: character-arrays,  Next: string-collating,  Prev: adding-character-set,  Up: adding-character-set

10.3.1 Character Definition Arrays
----------------------------------

Each simple character set has a configuration file located in the
`sql/share/charsets' directory. For a character set named MYSYS, the
file is named `MYSET.xml'. It uses `<map>' array elements to list
character set properties. `<map>' elements appear within these elements:

   * `<ctype>' defines attributes for each character.

   * `<lower>' and `<upper>' list the lowercase and uppercase
     characters.

   * `<unicode>' maps 8-bit character values to Unicode values.

   * `<collation>' elements indicate character ordering for comparisons
     and sorts, one element per collation. Binary collations need no
     `<map>' element because the character codes themselves provide the
     ordering.

For a complex character set as implemented in a `ctype-MYSET.c' file in
the `strings' directory, there are corresponding arrays:
`ctype_MYSET[]', `to_lower_MYSET[]', and so forth. Not every complex
character set has all of the arrays. See also the existing `ctype-*.c'
files for examples. See the `CHARSET_INFO.txt' file in the `strings'
directory for additional information.

Most of the arrays are indexed by character value and have 256
elements. The `<ctype>' array is indexed by character value + 1 and has
257 elements. This is a legacy convention for handling `EOF'.

`<ctype>' array elements are bit values.  Each element describes the
attributes of a single character in the character set. Each attribute
is associated with a bitmask, as defined in `include/m_ctype.h':

     #define _MY_U   01      /* Upper case */
     #define _MY_L   02      /* Lower case */
     #define _MY_NMR 04      /* Numeral (digit) */
     #define _MY_SPC 010     /* Spacing character */
     #define _MY_PNT 020     /* Punctuation */
     #define _MY_CTR 040     /* Control character */
     #define _MY_B   0100    /* Blank */
     #define _MY_X   0200    /* heXadecimal digit */

The `<ctype>' value for a given character should be the union of the
applicable bitmask values that describe the character. For example,
`'A'' is an uppercase character (`_MY_U') as well as a hexadecimal
digit (`_MY_X'), so its `ctype' value should be defined like this:

     ctype['A'+1] = _MY_U | _MY_X = 01 | 0200 = 0201

The bitmask values in `m_ctype.h' are octal values, but the elements of
the `<ctype>' array in `MYSET.xml' should be written as hexadecimal
values.

The `<lower>' and `<upper>' arrays hold the lowercase and uppercase
characters corresponding to each member of the character set. For
example:

     lower['A'] should contain 'a'
     upper['a'] should contain 'A'

Each `<collation>' array indicates how characters should be ordered for
comparison and sorting purposes. MySQL sorts characters based on the
values of this information. In some cases, this is the same as the
`<upper>' array, which means that sorting is case-insensitive. For more
complicated sorting rules (for complex character sets), see the
discussion of string collating in *Note string-collating::.


File: manual.info,  Node: string-collating,  Next: multi-byte-characters,  Prev: character-arrays,  Up: adding-character-set

10.3.2 String Collating Support for Complex Character Sets
----------------------------------------------------------

For a simple character set named MYSET, sorting rules are specified in
the `MYSET.xml' configuration file using `<map>' array elements within
`<collation>' elements.  If the sorting rules for your language are too
complex to be handled with simple arrays, you must define string
collating functions in the `ctype-MYSET.c' source file in the `strings'
directory.

The existing character sets provide the best documentation and examples
to show how these functions are implemented. Look at the `ctype-*.c'
files in the `strings' directory, such as the files for the `big5',
`czech', `gbk', `sjis', and `tis160' character sets. Take a look at the
`MY_COLLATION_HANDLER' structures to see how they are used. See also the
`CHARSET_INFO.txt' file in the `strings' directory for additional
information.


File: manual.info,  Node: multi-byte-characters,  Prev: string-collating,  Up: adding-character-set

10.3.3 Multi-Byte Character Support for Complex Character Sets
--------------------------------------------------------------

If you want to add support for a new character set named MYSET that
includes multi-byte characters, you must use multi-byte character
functions in the `ctype-MYSET.c' source file in the `strings' directory.

The existing character sets provide the best documentation and examples
to show how these functions are implemented. Look at the `ctype-*.c'
files in the `strings' directory, such as the files for the `euc_kr',
`gb2312', `gbk', `sjis', and `ujis' character sets. Take a look at the
`MY_CHARSET_HANDLER' structures to see how they are used. See also the
`CHARSET_INFO.txt' file in the `strings' directory for additional
information.


File: manual.info,  Node: adding-collation,  Next: charset-configuration,  Prev: adding-character-set,  Up: globalization

10.4 Adding a Collation to a Character Set
==========================================

* Menu:

* charset-collation-implementations::  Collation Implementation Types
* adding-collation-choosing-id::  Choosing a Collation ID
* adding-collation-simple-8bit::  Adding a Simple Collation to an 8-Bit Character Set
* adding-collation-unicode-uca::  Adding a UCA Collation to a Unicode Character Set

A collation is a set of rules that defines how to compare and sort
character strings. Each collation in MySQL belongs to a single
character set. Every character set has at least one collation, and most
have two or more collations.

A collation orders characters based on weights. Each character in a
character set maps to a weight. Characters with equal weights compare
as equal, and characters with unequal weights compare according to the
relative magnitude of their weights.

MySQL supports several collation implementations, as discussed in *Note
charset-collation-implementations::. Some of these can be added to
MySQL without recompiling:

   * Simple collations for 8-bit character sets.

   * UCA-based collations for Unicode character sets.

   * Binary (`XXX_bin') collations.

The following sections describe how to add collations of the first two
types to existing character sets. All existing character sets already
have a binary collation, so there is no need here to describe how to
add one.

Summary of the procedure for adding a new collation:

  1. Choose a collation ID.

  2. Add configuration information that names the collation and
     describes the character-ordering rules.

  3. Restart the server.

  4. Verify that the collation is present.

The instructions here cover only collations that can be added without
recompiling MySQL. To add a collation that does require recompiling (as
implemented by means of functions in a C source file), use the
instructions in *Note adding-character-set::. However, instead of adding
all the information required for a complete character set, just modify
the appropriate files for an existing character set. That is, based on
what is already present for the character set's current collations, add
data structures, functions, and configuration information for the new
collation.

*Note*:

If you modify an existing collation, that may affect the ordering of
rows for indexes on columns that use the collation.  In this case,
rebuild any such indexes to avoid problems such as incorrect query
results. For further information, see *Note
checking-table-incompatibilities::.

* Additional Resources *

   * The Unicode Collation Algorithm (UCA) specification:
     `http://www.unicode.org/reports/tr10/'

   * The Locale Data Markup Language (LDML) specification:
     `http://www.unicode.org/reports/tr35/'

   * MySQL Blog article `Instructions for adding a new Unicode
     collation':
     `http://blogs.mysql.com/peterg/2008/05/19/instructions-for-adding-a-new-unicode-collation/'


File: manual.info,  Node: charset-collation-implementations,  Next: adding-collation-choosing-id,  Prev: adding-collation,  Up: adding-collation

10.4.1 Collation Implementation Types
-------------------------------------

MySQL implements several types of collations:

*Simple collations for 8-bit character sets*

This kind of collation is implemented using an array of 256 weights
that defines a one-to-one mapping from character codes to weights.
`latin1_swedish_ci' is an example.  It is a case-insensitive collation,
so the uppercase and lowercase versions of a character have the same
weights and they compare as equal.

     mysql> SET NAMES 'latin1' COLLATE 'latin1_swedish_ci';
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT 'a' = 'A';
     +-----------+
     | 'a' = 'A' |
     +-----------+
     |         1 |
     +-----------+
     1 row in set (0.00 sec)

For implementation instructions, see *Note
adding-collation-simple-8bit::.

*Complex collations for 8-bit character sets*

This kind of collation is implemented using functions in a C source
file that define how to order characters, as described in *Note
adding-character-set::.

*Collations for non-Unicode multi-byte character sets*

For this type of collation, 8-bit (single-byte) and multi-byte
characters are handled differently. For 8-bit characters, character
codes map to weights in case-insensitive fashion. (For example, the
single-byte characters `'a'' and `'A'' both have a weight of `0x41'.)
For multi-byte characters, there are two types of relationship between
character codes and weights:

   * Weights equal character codes.  `sjis_japanese_ci' is an example
     of this kind of collation. The multi-byte character `'ぢ'' has a
     character code of `0x82C0', and the weight is also `0x82C0'.

   * Character codes map one-to-one to weights, but a code is not
     necessarily equal to the weight.  `gbk_chinese_ci' is an example
     of this kind of collation. The multi-byte character `'膰'' has a
     character code of `0x81B0' but a weight of `0xC286'.

For implementation instructions, see *Note adding-character-set::.

*Collations for Unicode multi-byte character sets*

Some of these collations are based on the Unicode Collation Algorithm
(UCA), others are not.

Non-UCA collations have a one-to-one mapping from character code to
weight. In MySQL, such collations are case insensitive and accent
insensitive. `utf8_general_ci' is an example: `'a'', `'A'', `'A`'', and
`'a''' each have different character codes but all have a weight of
`0x0041' and compare as equal.

     mysql> SET NAMES 'utf8' COLLATE 'utf8_general_ci';
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT 'a' = 'A', 'a' = 'A`', 'a' = 'a'';
     +-----------+-----------+-----------+
     | 'a' = 'A' | 'a' = 'A`' | 'a' = 'a'' |
     +-----------+-----------+-----------+
     |         1 |         1 |         1 |
     +-----------+-----------+-----------+
     1 row in set (0.06 sec)

UCA-based collations in MySQL have these properties:

   * If a character has weights, each weight uses 2 bytes (16 bits).

   * A character may have zero weights (or an empty weight). In this
     case, the character is ignorable. Example: "U+0000 NULL" does not
     have a weight and is ignorable.

   * A character may have one weight. Example: `'a'' has a weight of
     `0x0E33'.

   * A character may have many weights. This is an expansion.  Example:
     The German letter `'ss'' (SZ ligature, or SHARP S) has a weight of
     `0x0FEA0FEA'.

   * Many characters may have one weight. This is a contraction.
     Example: `'ch'' is a single letter in Czech and has a weight of
     `0x0EE2'.

A many-characters-to-many-weights mapping is also possible (this is
contraction with expansion), but is not supported by MySQL.

For implementation instructions, for a non-UCA collation, see *Note
adding-character-set::. For a UCA collation, see *Note
adding-collation-unicode-uca::.

*Miscellaneous collations*

There are also a few collations that do not fall into any of the
previous categories.


File: manual.info,  Node: adding-collation-choosing-id,  Next: adding-collation-simple-8bit,  Prev: charset-collation-implementations,  Up: adding-collation

10.4.2 Choosing a Collation ID
------------------------------

Each collation must have a unique ID. To add a collation, you must
choose an ID value that is not currently used. The range of IDs from
1024 to 2047 is reserved for user-defined collations.  Before MySQL
5.5, the ID must be chosen from the range 1 to 254.  The collation ID
that you choose will appear in these contexts:

   * The `ID' column of the *Note `INFORMATION_SCHEMA.COLLATIONS':
     collations-table.  table.

   * The `Id' column of *Note `SHOW COLLATION': show-collation. output.

   * The `charsetnr' member of the `MYSQL_FIELD' C API data structure.

   * The `number' member of the `MY_CHARSET_INFO' data structure
     returned by the *Note `mysql_get_character_set_info()':
     mysql-get-character-set-info.  C API function.

To determine the largest currently used ID, issue the following
statement:

     mysql> SELECT MAX(ID) FROM INFORMATION_SCHEMA.COLLATIONS;
     +---------+
     | MAX(ID) |
     +---------+
     |     210 |
     +---------+

To display a list of all currently used IDs, issue this statement:

     mysql> SELECT ID FROM INFORMATION_SCHEMA.COLLATIONS ORDER BY ID;
     +-----+
     | ID  |
     +-----+
     |   1 |
     |   2 |
     | ... |
     |  52 |
     |  53 |
     |  57 |
     |  58 |
     | ... |
     |  98 |
     |  99 |
     | 128 |
     | 129 |
     | ... |
     | 210 |
     +-----+

*Warning*:

Before MySQL 5.5, which provides for a range of user-defined collation
IDs, you must choose an ID in the range from 1 to 254. In this case, if
you upgrade MySQL, you may find that the collation ID you choose has
been assigned to a collation included in the new MySQL distribution. In
this case, you will need to choose a new value for your own collation.

In addition, before upgrading, you should save the configuration files
that you change. If you upgrade in place, the process will replace the
your modified files.


File: manual.info,  Node: adding-collation-simple-8bit,  Next: adding-collation-unicode-uca,  Prev: adding-collation-choosing-id,  Up: adding-collation

10.4.3 Adding a Simple Collation to an 8-Bit Character Set
----------------------------------------------------------

This section describes how to add a simple collation for an 8-bit
character set by writing the `<collation>' elements associated with a
`<charset>' character set description in the MySQL `Index.xml' file.
The procedure described here does not require recompiling MySQL. The
example adds a collation named `latin1_test_ci' to the `latin1'
character set.

  1. Choose a collation ID, as shown in *Note
     adding-collation-choosing-id::. The following steps use an ID of
     1024.

  2. Modify the `Index.xml' and `latin1.xml' configuration files. These
     files will be located in the directory named by the
     `character_sets_dir' system variable. You can check the variable
     value as follows, although the path name might be different on
     your system:

          mysql> SHOW VARIABLES LIKE 'character_sets_dir';
          +--------------------+-----------------------------------------+
          | Variable_name      | Value                                   |
          +--------------------+-----------------------------------------+
          | character_sets_dir | /user/local/mysql/share/mysql/charsets/ |
          +--------------------+-----------------------------------------+

  3. Choose a name for the collation and list it in the `Index.xml'
     file. Find the `<charset>' element for the character set to which
     the collation is being added, and add a `<collation>' element that
     indicates the collation name and ID, to associate the name with the
     ID. For example:

          <charset name="latin1">
            ...
            <collation name="latin1_test_ci" id="1024"/>
            ...
          </charset>

  4. In the `latin1.xml' configuration file, add a `<collation>'
     element that names the collation and that contains a `<map>'
     element that defines a character code-to-weight mapping table for
     character codes 0 to 255. Each value within the `<map>' element
     must be a number in hexadecimal format.

          <collation name="latin1_test_ci">
          <map>
           00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
           10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F
           20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F
           30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F
           40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F
           50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5D 5E 5F
           60 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F
           50 51 52 53 54 55 56 57 58 59 5A 7B 7C 7D 7E 7F
           80 81 82 83 84 85 86 87 88 89 8A 8B 8C 8D 8E 8F
           90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9E 9F
           A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF
           B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF
           41 41 41 41 5B 5D 5B 43 45 45 45 45 49 49 49 49
           44 4E 4F 4F 4F 4F 5C D7 5C 55 55 55 59 59 DE DF
           41 41 41 41 5B 5D 5B 43 45 45 45 45 49 49 49 49
           44 4E 4F 4F 4F 4F 5C F7 5C 55 55 55 59 59 DE FF
          </map>
          </collation>

  5. Restart the server and use this statement to verify that the
     collation is present:

          mysql> SHOW COLLATION LIKE 'latin1_test_ci';
          +----------------+---------+------+---------+----------+---------+
          | Collation      | Charset | Id   | Default | Compiled | Sortlen |
          +----------------+---------+------+---------+----------+---------+
          | latin1_test_ci | latin1  | 1024 |         |          |       1 |
          +----------------+---------+------+---------+----------+---------+


File: manual.info,  Node: adding-collation-unicode-uca,  Prev: adding-collation-simple-8bit,  Up: adding-collation

10.4.4 Adding a UCA Collation to a Unicode Character Set
--------------------------------------------------------

* Menu:

* ldml-collation-example::       Defining a UCA Collation Using LDML Syntax
* ldml-rules::                   LDML Syntax Supported in MySQL

This section describes how to add a UCA collation for a Unicode
character set by writing the `<collation>' element within a `<charset>'
character set description in the MySQL `Index.xml' file. The procedure
described here does not require recompiling MySQL. It uses a subset of
the Locale Data Markup Language (LDML) specification, which is
available at `http://www.unicode.org/reports/tr35/'. With this method,
you need not define the entire collation. Instead, you begin with an
existing `base' collation and describe the new collation in terms of
how it differs from the base collation. The following table lists the
base collations of the Unicode character sets for which UCA collations
can be defined.

*MySQL Character Sets Available for User-Defined UCA Collations*

Character Set          Base Collation
`utf8'                 `utf8_unicode_ci'
`ucs2'                 `ucs2_unicode_ci'
`utf16'                `utf16_unicode_ci'
`utf32'                `utf32_unicode_ci'

The following sections show how to add a collation that is defined
using LDML syntax, and provide a summary of LDML rules supported in
MySQL.


File: manual.info,  Node: ldml-collation-example,  Next: ldml-rules,  Prev: adding-collation-unicode-uca,  Up: adding-collation-unicode-uca

10.4.4.1 Defining a UCA Collation Using LDML Syntax
...................................................

To add a UCA collation for a Unicode character set without recompiling
MySQL, use the following procedure. If you are unfamiliar with the LDML
rules used to describe the collation's sort characteristics, see *Note
ldml-rules::.

The example adds a collation named `utf8_phone_ci' to the `utf8'
character set. The collation is designed for a scenario involving a Web
application for which users post their names and phone numbers. Phone
numbers can be given in very different formats:

     +7-12345-67
     +7-12-345-67
     +7 12 345 67
     +7 (12) 345 67
     +71234567

The problem raised by dealing with these kinds of values is that the
varying permissible formats make searching for a specific phone number
very difficult. The solution is to define a new collation that reorders
punctuation characters, making them ignorable.

  1. Choose a collation ID, as shown in *Note
     adding-collation-choosing-id::. The following steps use an ID of
     1029.

  2. To modify the `Index.xml' configuration file. This file will be
     located in the directory named by the `character_sets_dir' system
     variable. You can check the variable value as follows, although
     the path name might be different on your system:

          mysql> SHOW VARIABLES LIKE 'character_sets_dir';
          +--------------------+-----------------------------------------+
          | Variable_name      | Value                                   |
          +--------------------+-----------------------------------------+
          | character_sets_dir | /user/local/mysql/share/mysql/charsets/ |
          +--------------------+-----------------------------------------+

  3. Choose a name for the collation and list it in the `Index.xml'
     file. In addition, you'll need to provide the collation ordering
     rules. Find the `<charset>' element for the character set to which
     the collation is being added, and add a `<collation>' element that
     indicates the collation name and ID, to associate the name with
     the ID. Within the `<collation>' element, provide a `<rules>'
     element containing the ordering rules:

          <charset name="utf8">
            ...
            <collation name="utf8_phone_ci" id="1029">
              <rules>
                <reset>\u0000</reset>
                <i>\u0020</i> <!-- space -->
                <i>\u0028</i> <!-- left parenthesis -->
                <i>\u0029</i> <!-- right parenthesis -->
                <i>\u002B</i> <!-- plus -->
                <i>\u002D</i> <!-- hyphen -->
              </rules>
            </collation>
            ...
          </charset>

  4. If you want a similar collation for other Unicode character sets,
     add other `<collation>' elements. For example, to define
     `ucs2_phone_ci', add a `<collation>' element to the `<charset
     name="ucs2">' element.  Remember that each collation must have its
     own unique ID.

  5. Restart the server and use this statement to verify that the
     collation is present:

          mysql> SHOW COLLATION LIKE 'utf8_phone_ci';
          +---------------+---------+------+---------+----------+---------+
          | Collation     | Charset | Id   | Default | Compiled | Sortlen |
          +---------------+---------+------+---------+----------+---------+
          | utf8_phone_ci | utf8    | 1029 |         |          |       8 |
          +---------------+---------+------+---------+----------+---------+

Now test the collation to make sure that it has the desired properties.

Create a table containing some sample phone numbers using the new
collation:

     mysql> CREATE TABLE phonebook (
         ->   name VARCHAR(64),
         ->   phone VARCHAR(64) CHARACTER SET utf8 COLLATE utf8_phone_ci
         -> );
     Query OK, 0 rows affected (0.09 sec)

     mysql> INSERT INTO phonebook VALUES ('Svoj','+7 912 800 80 02');
     Query OK, 1 row affected (0.00 sec)

     mysql> INSERT INTO phonebook VALUES ('Hf','+7 (912) 800 80 04');
     Query OK, 1 row affected (0.00 sec)

     mysql> INSERT INTO phonebook VALUES ('Bar','+7-912-800-80-01');
     Query OK, 1 row affected (0.00 sec)

     mysql> INSERT INTO phonebook VALUES ('Ramil','(7912) 800 80 03');
     Query OK, 1 row affected (0.00 sec)

     mysql> INSERT INTO phonebook VALUES ('Sanja','+380 (912) 8008005');
     Query OK, 1 row affected (0.00 sec)

Run some queries to see whether the ignored punctuation characters are
in fact ignored for sorting and comparisons:

     mysql> SELECT * FROM phonebook ORDER BY phone;
     +-------+--------------------+
     | name  | phone              |
     +-------+--------------------+
     | Sanja | +380 (912) 8008005 |
     | Bar   | +7-912-800-80-01   |
     | Svoj  | +7 912 800 80 02   |
     | Ramil | (7912) 800 80 03   |
     | Hf    | +7 (912) 800 80 04 |
     +-------+--------------------+
     5 rows in set (0.00 sec)

     mysql> SELECT * FROM phonebook WHERE phone='+7(912)800-80-01';
     +------+------------------+
     | name | phone            |
     +------+------------------+
     | Bar  | +7-912-800-80-01 |
     +------+------------------+
     1 row in set (0.00 sec)

     mysql> SELECT * FROM phonebook WHERE phone='79128008001';
     +------+------------------+
     | name | phone            |
     +------+------------------+
     | Bar  | +7-912-800-80-01 |
     +------+------------------+
     1 row in set (0.00 sec)

     mysql> SELECT * FROM phonebook WHERE phone='7 9 1 2 8 0 0 8 0 0 1';
     +------+------------------+
     | name | phone            |
     +------+------------------+
     | Bar  | +7-912-800-80-01 |
     +------+------------------+
     1 row in set (0.00 sec)


File: manual.info,  Node: ldml-rules,  Prev: ldml-collation-example,  Up: adding-collation-unicode-uca

10.4.4.2 LDML Syntax Supported in MySQL
.......................................

This section describes the LDML syntax that MySQL recognizes.  This is
a subset of the syntax described in the LDML specification available at
`http://www.unicode.org/reports/tr35/', which should be consulted for
further information. The rules described here are all supported except
that character sorting occurs only at the primary level. Rules that
specify differences at secondary or higher sort levels are recognized
(and thus can be included in collation definitions) but are treated as
equality at the primary level.

*Character Representation*

Characters named in LDML rules can be written in `\uNNNN' format, where
NNNN is the hexadecimal Unicode code point value. Within hexadecimal
values, the digits `A' through `F' are not case sensitive; `\u00E1' and
`\u00e1' are equivalent. Basic Latin letters `A-Z' and `a-z' can also be
written literally (this is a MySQL limitation; the LDML specification
permits literal non-Latin1 characters in the rules). Only characters in
the Basic Multilingual Plane can be specified. This notation does not
apply to characters outside the BMP range of `0000' to `FFFF'.

The `Index.xml' file itself should be written using ASCII encoding.

*Syntax Rules*

LDML has reset rules and shift rules to specify character ordering.
Orderings are given as a set of rules that begin with a reset rule that
establishes an anchor point, followed by shift rules that indicate how
characters sort relative to the anchor point.

   * A `<reset>' rule does not specify any ordering in and of itself.
     Instead, it `resets' the ordering for subsequent shift rules to
     cause them to be taken in relation to a given character. Either of
     the following rules resets subsequent shift rules to be taken in
     relation to the letter `'A'':

          <reset>A</reset>

          <reset>\u0041</reset>

   * The `<p>', `<s>', and `<t>' shift rules define primary, secondary,
     and tertiary differences of a character from another character:

        * Use primary differences to distinguish separate letters.

        * Use secondary differences to distinguish accent variations.

        * Use tertiary differences to distinguish lettercase variations.

     Either of these rules specifies a primary shift rule for the `'G''
     character:

          <p>G</p>

          <p>\u0047</p>

   * The `<i>' shift rule indicates that one character sorts
     identically to another. The following rules cause `'b'' to sort
     the same as `'a'':

          <reset>a</reset>
          <i>b</i>

     The `<i>' shift rules is supported as of MySQL 5.5.3. Prior to
     5.5.3, use `<s> ... </s>' instead.


File: manual.info,  Node: charset-configuration,  Next: time-zone-support,  Prev: adding-collation,  Up: globalization

10.5 Character Set Configuration
================================

You can change the default server character set and collation with the
`--character-set-server' and `--collation-server' options when you
start the server. The collation must be a legal collation for the
default character set. (Use the *Note `SHOW COLLATION': show-collation.
statement to determine which collations are available for each
character set.) See *Note server-options::.

If you try to use a character set that is not compiled into your
binary, you might run into the following problems:

   * Your program uses an incorrect path to determine where the
     character sets are stored (which is typically the
     `share/mysql/charsets' or `share/charsets' directory under the
     MySQL installation directory). This can be fixed by using the
     `--character-sets-dir' option when you run the program in
     question. For example, to specify a directory to be used by MySQL
     client programs, list it in the `[client]' group of your option
     file. The examples given here show what the setting might look
     like for Unix or Windows, respectively:

          [client]
          character-sets-dir=/usr/local/mysql/share/mysql/charsets

          [client]
          character-sets-dir="C:/Program Files/MySQL/MySQL Server 5.5/share/charsets"

   * The character set is a complex character set that cannot be loaded
     dynamically. In this case, you must recompile the program with
     support for the character set.

     For Unicode character sets, you can define collations without
     recompiling by using LDML notation. See *Note
     adding-collation-unicode-uca::.

   * The character set is a dynamic character set, but you do not have
     a configuration file for it. In this case, you should install the
     configuration file for the character set from a new MySQL
     distribution.

   * If your character set index file does not contain the name for the
     character set, your program displays an error message. The file is
     named `Index.xml' and the message is:

          Character set 'CHARSET_NAME' is not a compiled character set and is not
          specified in the '/usr/share/mysql/charsets/Index.xml' file

     To solve this problem, you should either get a new index file or
     manually add the name of any missing character sets to the current
     file.

You can force client programs to use specific character set as follows:

     [client]
     default-character-set=CHARSET_NAME

This is normally unnecessary. However, when `character_set_system'
differs from `character_set_server' or `character_set_client', and you
input characters manually (as database object identifiers, column
values, or both), these may be displayed incorrectly in output from the
client or the output itself may be formatted incorrectly.  In such
cases, starting the mysql client with
`--default-character-set=SYSTEM_CHARACTER_SET'--that is, setting the
client character set to match the system character set--should fix the
problem.

For `MyISAM' tables, you can check the character set name and number
for a table with *Note `myisamchk -dvv TBL_NAME': myisamchk.


File: manual.info,  Node: time-zone-support,  Next: locale-support,  Prev: charset-configuration,  Up: globalization

10.6 MySQL Server Time Zone Support
===================================

* Menu:

* time-zone-upgrades::           Staying Current with Time Zone Changes
* time-zone-leap-seconds::       Time Zone Leap Second Support

The MySQL server maintains several time zone settings:

   * The system time zone. When the server starts, it attempts to
     determine the time zone of the host machine and uses it to set the
     `system_time_zone' system variable. The value does not change
     thereafter.

     You can set the system time zone for MySQL Server at startup with
     the `--timezone=TIMEZONE_NAME' option to *Note `mysqld_safe':
     mysqld-safe. You can also set it by setting the `TZ' environment
     variable before you start *Note `mysqld': mysqld. The permissible
     values for `--timezone' or `TZ' are system dependent. Consult your
     operating system documentation to see what values are acceptable.

   * The server's current time zone. The global `time_zone' system
     variable indicates the time zone the server currently is operating
     in.  The initial value for `time_zone' is `'SYSTEM'', which
     indicates that the server time zone is the same as the system time
     zone.

     The initial global server time zone value can be specified
     explicitly at startup with the `--default-time-zone=TIMEZONE'
     option on the command line, or you can use the following line in
     an option file:

          default-time-zone='TIMEZONE'

     If you have the `SUPER' privilege, you can set the global server
     time zone value at runtime with this statement:

          mysql> SET GLOBAL time_zone = TIMEZONE;

   * Per-connection time zones. Each client that connects has its own
     time zone setting, given by the session `time_zone' variable.
     Initially, the session variable takes its value from the global
     `time_zone' variable, but the client can change its own time zone
     with this statement:

          mysql> SET time_zone = TIMEZONE;

The current session time zone setting affects display and storage of
time values that are zone-sensitive. This includes the values displayed
by functions such as `NOW()' or `CURTIME()', and values stored in and
retrieved from *Note `TIMESTAMP': datetime. columns.  Values for *Note
`TIMESTAMP': datetime. columns are converted from the current time zone
to UTC for storage, and from UTC to the current time zone for retrieval.

The current time zone setting does not affect values displayed by
functions such as `UTC_TIMESTAMP()' or values in *Note `DATE': datetime,
*Note `TIME': time, or *Note `DATETIME': datetime. columns. Nor are
values in those data types stored in UTC; the time zone applies for them
only when converting from `TIMESTAMP' values. If you want
locale-specific arithmetic for *Note `DATE': datetime, *Note `TIME':
time, or *Note `DATETIME': datetime. values, convert them to UTC,
perform the arithmetic, and then convert back.

The current values of the global and client-specific time zones can be
retrieved like this:

     mysql> SELECT @@global.time_zone, @@session.time_zone;

TIMEZONE values can be given in several formats, none of which are case
sensitive:

   * The value `'SYSTEM'' indicates that the time zone should be the
     same as the system time zone.

   * The value can be given as a string indicating an offset from UTC,
     such as `'+10:00'' or `'-6:00''.

   * The value can be given as a named time zone, such as
     `'Europe/Helsinki'', `'US/Eastern'', or `'MET''.  Named time zones
     can be used only if the time zone information tables in the
     `mysql' database have been created and populated.

The MySQL installation procedure creates the time zone tables in the
`mysql' database, but does not load them. You must do so manually using
the following instructions. (If you are upgrading to MySQL 4.1.3 or
later from an earlier version, you can create the tables by upgrading
your `mysql' database. Use the instructions in *Note mysql-upgrade::.
After creating the tables, you can load them.)

*Note*:

Loading the time zone information is not necessarily a one-time
operation because the information changes occasionally. For example,
the rules for Daylight Saving Time in the United States, Mexico, and
parts of Canada changed in 2007. When such changes occur, applications
that use the old rules become out of date and you may find it necessary
to reload the time zone tables to keep the information used by your
MySQL server current. See the notes at the end of this section.

If your system has its own _zoneinfo_ database (the set of files
describing time zones), you should use the *Note `mysql_tzinfo_to_sql':
mysql-tzinfo-to-sql. program for filling the time zone tables. Examples
of such systems are Linux, FreeBSD, Solaris, and Mac OS X. One likely
location for these files is the `/usr/share/zoneinfo' directory. If
your system does not have a zoneinfo database, you can use the
downloadable package described later in this section.

The *Note `mysql_tzinfo_to_sql': mysql-tzinfo-to-sql. program is used
to load the time zone tables. On the command line, pass the zoneinfo
directory path name to *Note `mysql_tzinfo_to_sql':
mysql-tzinfo-to-sql. and send the output into the *Note `mysql': mysql.
program. For example:

     shell> mysql_tzinfo_to_sql /usr/share/zoneinfo | mysql -u root mysql

*Note `mysql_tzinfo_to_sql': mysql-tzinfo-to-sql. reads your system's
time zone files and generates SQL statements from them.  *Note `mysql':
mysql. processes those statements to load the time zone tables.

*Note `mysql_tzinfo_to_sql': mysql-tzinfo-to-sql. also can be used to
load a single time zone file or to generate leap second information:

   * To load a single time zone file TZ_FILE that corresponds to a time
     zone name TZ_NAME, invoke *Note `mysql_tzinfo_to_sql':
     mysql-tzinfo-to-sql. like this:

          shell> mysql_tzinfo_to_sql TZ_FILE TZ_NAME | mysql -u root mysql

     With this approach, you must execute a separate command to load
     the time zone file for each named zone that the server needs to
     know about.

   * If your time zone needs to account for leap seconds, initialize
     the leap second information like this, where TZ_FILE is the name
     of your time zone file:

          shell> mysql_tzinfo_to_sql --leap TZ_FILE | mysql -u root mysql

   * After running *Note `mysql_tzinfo_to_sql': mysql-tzinfo-to-sql, it
     is best to restart the server so that it does not continue to use
     any previously cached time zone data.

If your system is one that has no zoneinfo database (for example,
Windows or HP-UX), you can use the package of pre-built time zone
tables that is available for download at the MySQL Developer Zone:

     `http://dev.mysql.com/downloads/timezones.html'

This time zone package contains `.frm', `.MYD', and `.MYI' files for
the `MyISAM' time zone tables. These tables should be part of the
`mysql' database, so you should place the files in the `mysql'
subdirectory of your MySQL server's data directory. The server should
be stopped while you do this and restarted afterward.

*Warning*:

Do not use the downloadable package if your system has a zoneinfo
database. Use the *Note `mysql_tzinfo_to_sql': mysql-tzinfo-to-sql.
utility instead.  Otherwise, you may cause a difference in datetime
handling between MySQL and other applications on your system.

For information about time zone settings in replication setup, please
see *Note replication-features::.


File: manual.info,  Node: time-zone-upgrades,  Next: time-zone-leap-seconds,  Prev: time-zone-support,  Up: time-zone-support

10.6.1 Staying Current with Time Zone Changes
---------------------------------------------

As mentioned earlier, when the time zone rules change, applications
that use the old rules become out of date. To stay current, it is
necessary to make sure that your system uses current time zone
information is used. For MySQL, there are two factors to consider in
staying current:

   * The operating system time affects the value that the MySQL server
     uses for times if its time zone is set to `SYSTEM'. Make sure that
     your operating system is using the latest time zone information.
     For most operating systems, the latest update or service pack
     prepares your system for the time changes. Check the Web site for
     your operating system vendor for an update that addresses the time
     changes.

   * If you replace the system's `/etc/localtime' timezone file with a
     version that uses rules differing from those in effect at *Note
     `mysqld': mysqld. startup, you should restart *Note `mysqld':
     mysqld. so that it uses the updated rules.  Otherwise, *Note
     `mysqld': mysqld. might not notice when the system changes its
     time.

   * If you use named time zones with MySQL, make sure that the time
     zone tables in the `mysql' database are up to date. If your system
     has its own zoneinfo database, you should reload the MySQL time
     zone tables whenever the zoneinfo database is updated, using the
     instructions given earlier in this section. For systems that do
     not have their own zoneinfo database, check the MySQL Developer
     Zone for updates. When a new update is available, download it and
     use it to replace your current time zone tables. *Note `mysqld':
     mysqld. caches time zone information that it looks up, so after
     replacing the time zone tables, you should restart *Note `mysqld':
     mysqld. to make sure that it does not continue to serve outdated
     time zone data.

If you are uncertain whether named time zones are available, for use
either as the server's time zone setting or by clients that set their
own time zone, check whether your time zone tables are empty. The
following query determines whether the table that contains time zone
names has any rows:

     mysql> SELECT COUNT(*) FROM mysql.time_zone_name;
     +----------+
     | COUNT(*) |
     +----------+
     |        0 |
     +----------+

A count of zero indicates that the table is empty. In this case, no one
can be using named time zones, and you don't need to update the tables.
A count greater than zero indicates that the table is not empty and
that its contents are available to be used for named time zone support.
In this case, you should be sure to reload your time zone tables so
that anyone who uses named time zones will get correct query results.

To check whether your MySQL installation is updated properly for a
change in Daylight Saving Time rules, use a test like the one
following. The example uses values that are appropriate for the 2007
DST 1-hour change that occurs in the United States on March 11 at 2 a.m.

The test uses these two queries:

     SELECT CONVERT_TZ('2007-03-11 2:00:00','US/Eastern','US/Central');
     SELECT CONVERT_TZ('2007-03-11 3:00:00','US/Eastern','US/Central');

The two time values indicate the times at which the DST change occurs,
and the use of named time zones requires that the time zone tables be
used. The desired result is that both queries return the same result
(the input time, converted to the equivalent value in the 'US/Central'
time zone).

Before updating the time zone tables, you would see an incorrect result
like this:

     mysql> SELECT CONVERT_TZ('2007-03-11 2:00:00','US/Eastern','US/Central');
     +------------------------------------------------------------+
     | CONVERT_TZ('2007-03-11 2:00:00','US/Eastern','US/Central') |
     +------------------------------------------------------------+
     | 2007-03-11 01:00:00                                        |
     +------------------------------------------------------------+

     mysql> SELECT CONVERT_TZ('2007-03-11 3:00:00','US/Eastern','US/Central');
     +------------------------------------------------------------+
     | CONVERT_TZ('2007-03-11 3:00:00','US/Eastern','US/Central') |
     +------------------------------------------------------------+
     | 2007-03-11 02:00:00                                        |
     +------------------------------------------------------------+

After updating the tables, you should see the correct result:

     mysql> SELECT CONVERT_TZ('2007-03-11 2:00:00','US/Eastern','US/Central');
     +------------------------------------------------------------+
     | CONVERT_TZ('2007-03-11 2:00:00','US/Eastern','US/Central') |
     +------------------------------------------------------------+
     | 2007-03-11 01:00:00                                        |
     +------------------------------------------------------------+

     mysql> SELECT CONVERT_TZ('2007-03-11 3:00:00','US/Eastern','US/Central');
     +------------------------------------------------------------+
     | CONVERT_TZ('2007-03-11 3:00:00','US/Eastern','US/Central') |
     +------------------------------------------------------------+
     | 2007-03-11 01:00:00                                        |
     +------------------------------------------------------------+


File: manual.info,  Node: time-zone-leap-seconds,  Prev: time-zone-upgrades,  Up: time-zone-support

10.6.2 Time Zone Leap Second Support
------------------------------------

Leap second values are returned with a time part that ends with
`:59:59'. This means that a function such as `NOW()' can return the
same value for two or three consecutive seconds during the leap second.
It remains true that literal temporal values having a time part that
ends with `:59:60' or `:59:61' are considered invalid.

If it is necessary to search for *Note `TIMESTAMP': datetime. values
one second before the leap second, anomalous results may be obtained if
you use a comparison with `'YYYY-MM-DD hh:mm:ss'' values. The following
example demonstrates this. It changes the local time zone to UTC so
there is no difference between internal values (which are in UTC) and
displayed values (which have time zone correction applied).

     mysql> CREATE TABLE t1 (
         ->   a INT,
         ->   ts TIMESTAMP DEFAULT NOW(),
         ->   PRIMARY KEY (ts)
         -> );
     Query OK, 0 rows affected (0.01 sec)

     mysql> -- change to UTC
     mysql> SET time_zone = '+00:00';
     Query OK, 0 rows affected (0.00 sec)

     mysql> -- Simulate NOW() = '2008-12-31 23:59:59'
     mysql> SET timestamp = 1230767999;
     Query OK, 0 rows affected (0.00 sec)

     mysql> INSERT INTO t1 (a) VALUES (1);
     Query OK, 1 row affected (0.00 sec)

     mysql> -- Simulate NOW() = '2008-12-31 23:59:60'
     mysql> SET timestamp = 1230768000;
     Query OK, 0 rows affected (0.00 sec)

     mysql> INSERT INTO t1 (a) VALUES (2);
     Query OK, 1 row affected (0.00 sec)

     mysql> -- values differ internally but display the same
     mysql> SELECT a, ts, UNIX_TIMESTAMP(ts) FROM t1;
     +------+---------------------+--------------------+
     | a    | ts                  | UNIX_TIMESTAMP(ts) |
     +------+---------------------+--------------------+
     |    1 | 2008-12-31 23:59:59 |         1230767999 |
     |    2 | 2008-12-31 23:59:59 |         1230768000 |
     +------+---------------------+--------------------+
     2 rows in set (0.00 sec)

     mysql> -- only the non-leap value matches
     mysql> SELECT * FROM t1 WHERE ts = '2008-12-31 23:59:59';
     +------+---------------------+
     | a    | ts                  |
     +------+---------------------+
     |    1 | 2008-12-31 23:59:59 |
     +------+---------------------+
     1 row in set (0.00 sec)

     mysql> -- the leap value with seconds=60 is invalid
     mysql> SELECT * FROM t1 WHERE ts = '2008-12-31 23:59:60';
     Empty set, 2 warnings (0.00 sec)

To work around this, you can use a comparison based on the UTC value
actually stored in column, which has the leap second correction applied:

     mysql> -- selecting using UNIX_TIMESTAMP value return leap value
     mysql> SELECT * FROM t1 WHERE UNIX_TIMESTAMP(ts) = 1230768000;
     +------+---------------------+
     | a    | ts                  |
     +------+---------------------+
     |    2 | 2008-12-31 23:59:59 |
     +------+---------------------+
     1 row in set (0.00 sec)


File: manual.info,  Node: locale-support,  Prev: time-zone-support,  Up: globalization

10.7 MySQL Server Locale Support
================================

The locale indicated by the `lc_time_names' system variable controls
the language used to display day and month names and abbreviations.
This variable affects the output from the `DATE_FORMAT()', `DAYNAME()',
and `MONTHNAME()' functions.

`lc_time_names' does not affect the `STR_TO_DATE()' or `GET_FORMAT()'
function.

The `lc_time_names' value does not affect the result from `FORMAT()',
but this function takes an optional third parameter that enables a
locale to be specified to be used for the result number's decimal
point, thousands separator, and grouping between separators.
Permissible locale values are the same as the legal values for the
`lc_time_names' system variable.

Locale names have language and region subtags listed by IANA
(`http://www.iana.org/assignments/language-subtag-registry') such as
`'ja_JP'' or `'pt_BR''.  The default value is `'en_US'' regardless of
your system's locale setting, but you can set the value at server
startup or set the `GLOBAL' value if you have the `SUPER' privilege.
Any client can examine the value of `lc_time_names' or set its
`SESSION' value to affect the locale for its own connection.

     mysql> SET NAMES 'utf8';
     Query OK, 0 rows affected (0.09 sec)

     mysql> SELECT @@lc_time_names;
     +-----------------+
     | @@lc_time_names |
     +-----------------+
     | en_US           |
     +-----------------+
     1 row in set (0.00 sec)

     mysql> SELECT DAYNAME('2010-01-01'), MONTHNAME('2010-01-01');
     +-----------------------+-------------------------+
     | DAYNAME('2010-01-01') | MONTHNAME('2010-01-01') |
     +-----------------------+-------------------------+
     | Friday                | January                 |
     +-----------------------+-------------------------+
     1 row in set (0.00 sec)

     mysql> SELECT DATE_FORMAT('2010-01-01','%W %a %M %b');
     +-----------------------------------------+
     | DATE_FORMAT('2010-01-01','%W %a %M %b') |
     +-----------------------------------------+
     | Friday Fri January Jan                  |
     +-----------------------------------------+
     1 row in set (0.00 sec)

     mysql> SET lc_time_names = 'es_MX';
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT @@lc_time_names;
     +-----------------+
     | @@lc_time_names |
     +-----------------+
     | es_MX           |
     +-----------------+
     1 row in set (0.00 sec)

     mysql> SELECT DAYNAME('2010-01-01'), MONTHNAME('2010-01-01');
     +-----------------------+-------------------------+
     | DAYNAME('2010-01-01') | MONTHNAME('2010-01-01') |
     +-----------------------+-------------------------+
     | viernes               | enero                   |
     +-----------------------+-------------------------+
     1 row in set (0.00 sec)

     mysql> SELECT DATE_FORMAT('2010-01-01','%W %a %M %b');
     +-----------------------------------------+
     | DATE_FORMAT('2010-01-01','%W %a %M %b') |
     +-----------------------------------------+
     | viernes vie enero ene                   |
     +-----------------------------------------+
     1 row in set (0.00 sec)

The day or month name for each of the affected functions is converted
from `utf8' to the character set indicated by the
`character_set_connection' system variable.

`lc_time_names' may be set to any of the following locale values. The
set of locales supported by MySQL may differ from those supported by
your operating system.

This table lists locale values to which `lc_time_names' may be set. The
locale values are presented in a two-column table and in alphabetical
order from left to right.

`ar_AE': Arabic - United Arab        `ar_BH': Arabic - Bahrain
Emirates                             
`ar_DZ': Arabic - Algeria            `ar_EG': Arabic - Egypt
`ar_IN': Arabic - India              `ar_IQ': Arabic - Iraq
`ar_JO': Arabic - Jordan             `ar_KW': Arabic - Kuwait
`ar_LB': Arabic - Lebanon            `ar_LY': Arabic - Libya
`ar_MA': Arabic - Morocco            `ar_OM': Arabic - Oman
`ar_QA': Arabic - Qatar              `ar_SA': Arabic - Saudi Arabia
`ar_SD': Arabic - Sudan              `ar_SY': Arabic - Syria
`ar_TN': Arabic - Tunisia            `ar_YE': Arabic - Yemen
`be_BY': Belarusian - Belarus        `bg_BG': Bulgarian - Bulgaria
`ca_ES': Catalan - Spain             `cs_CZ': Czech - Czech Republic
`da_DK': Danish - Denmark            `de_AT': German - Austria
`de_BE': German - Belgium            `de_CH': German - Switzerland
`de_DE': German - Germany            `de_LU': German - Luxembourg
`el_GR': Greek - Greece              `en_AU': English - Australia
`en_CA': English - Canada            `en_GB': English - United Kingdom
`en_IN': English - India             `en_NZ': English - New Zealand
`en_PH': English - Philippines       `en_US': English - United States
`en_ZA': English - South Africa      `en_ZW': English - Zimbabwe
`es_AR': Spanish - Argentina         `es_BO': Spanish - Bolivia
`es_CL': Spanish - Chile             `es_CO': Spanish - Columbia
`es_CR': Spanish - Costa Rica        `es_DO': Spanish - Dominican
                                     Republic
`es_EC': Spanish - Ecuador           `es_ES': Spanish - Spain
`es_GT': Spanish - Guatemala         `es_HN': Spanish - Honduras
`es_MX': Spanish - Mexico            `es_NI': Spanish - Nicaragua
`es_PA': Spanish - Panama            `es_PE': Spanish - Peru
`es_PR': Spanish - Puerto Rico       `es_PY': Spanish - Paraguay
`es_SV': Spanish - El Salvador       `es_US': Spanish - United States
`es_UY': Spanish - Uruguay           `es_VE': Spanish - Venezuela
`et_EE': Estonian - Estonia          `eu_ES': Basque - Basque
`fi_FI': Finnish - Finland           `fo_FO': Faroese - Faroe Islands
`fr_BE': French - Belgium            `fr_CA': French - Canada
`fr_CH': French - Switzerland        `fr_FR': French - France
`fr_LU': French - Luxembourg         `gl_ES': Galician - Spain
`gu_IN': Gujarati - India            `he_IL': Hebrew - Israel
`hi_IN': Hindi - India               `hr_HR': Croatian - Croatia
`hu_HU': Hungarian - Hungary         `id_ID': Indonesian - Indonesia
`is_IS': Icelandic - Iceland         `it_CH': Italian - Switzerland
`it_IT': Italian - Italy             `ja_JP': Japanese - Japan
`ko_KR': Korean - Republic of Korea  `lt_LT': Lithuanian - Lithuania
`lv_LV': Latvian - Latvia            `mk_MK': Macedonian - FYROM
`mn_MN': Mongolia - Mongolian        `ms_MY': Malay - Malaysia
`nb_NO': Norwegian(Bokmaal) - Norway `nl_BE': Dutch - Belgium
`nl_NL': Dutch - The Netherlands     `no_NO': Norwegian - Norway
`pl_PL': Polish - Poland             `pt_BR': Portugese - Brazil
`pt_PT': Portugese - Portugal        `ro_RO': Romanian - Romania
`ru_RU': Russian - Russia            `ru_UA': Russian - Ukraine
`sk_SK': Slovak - Slovakia           `sl_SI': Slovenian - Slovenia
`sq_AL': Albanian - Albania          `sr_RS': Serbian - Yugoslavia
`sv_FI': Swedish - Finland           `sv_SE': Swedish - Sweden
`ta_IN': Tamil - India               `te_IN': Telugu - India
`th_TH': Thai - Thailand             `tr_TR': Turkish - Turkey
`uk_UA': Ukrainian - Ukraine         `ur_PK': Urdu - Pakistan
`vi_VN': Vietnamese - Viet Nam       `zh_CN': Chinese - China
`zh_HK': Chinese - Hong Kong         `zh_TW': Chinese - Taiwan Province
                                     of China


File: manual.info,  Node: data-types,  Next: functions,  Prev: globalization,  Up: Top

11 Data Types
*************

* Menu:

* data-type-overview::           Data Type Overview
* numeric-types::                Numeric Types
* date-and-time-types::          Date and Time Types
* string-types::                 String Types
* data-type-defaults::           Data Type Default Values
* storage-requirements::         Data Type Storage Requirements
* choosing-types::               Choosing the Right Type for a Column
* other-vendor-data-types::      Using Data Types from Other Database Engines

MySQL supports a number of SQL data types in several categories:
numeric types, date and time types, and string (character and byte)
types. This chapter provides an overview of these data types, a more
detailed description of the properties of the types in each category,
and a summary of the data type storage requirements. The initial
overview is intentionally brief.  The more detailed descriptions later
in the chapter should be consulted for additional information about
particular data types, such as the permissible formats in which you can
specify values.

MySQL also supports extensions for handling spatial data. For
information about these data types, see *Note spatial-extensions::.

Data type descriptions use these conventions:

   * M indicates the maximum display width for integer types. For
     floating-point and fixed-point types, M is the total number of
     digits that can be stored (the precision). For string types, M is
     the maximum length. The maximum permissible value of M depends on
     the data type.

   * D applies to floating-point and fixed-point types and indicates
     the number of digits following the decimal point (the scale). The
     maximum possible value is 30, but should be no greater than M-2.

   * Square brackets (``['' and ``]'') indicate optional parts of type
     definitions.


File: manual.info,  Node: data-type-overview,  Next: numeric-types,  Prev: data-types,  Up: data-types

11.1 Data Type Overview
=======================

* Menu:

* numeric-type-overview::        Numeric Type Overview
* date-and-time-type-overview::  Date and Time Type Overview
* string-type-overview::         String Type Overview


File: manual.info,  Node: numeric-type-overview,  Next: date-and-time-type-overview,  Prev: data-type-overview,  Up: data-type-overview

11.1.1 Numeric Type Overview
----------------------------

A summary of the numeric data types follows. For additional information
about properties and storage requirements of the numeric types, see
*Note numeric-types::, and *Note storage-requirements::.

M indicates the maximum display width for integer types. The maximum
display width is 255. Display width is unrelated to the range of values
a type can contain, as described in *Note numeric-types::. For
floating-point and fixed-point types, M is the total number of digits
that can be stored.

If you specify `ZEROFILL' for a numeric column, MySQL automatically
adds the `UNSIGNED' attribute to the column.

Numeric data types that permit the `UNSIGNED' attribute also permit
`SIGNED'. However, these data types are signed by default, so the
`SIGNED' attribute has no effect.

`SERIAL' is an alias for `BIGINT UNSIGNED NOT NULL AUTO_INCREMENT
UNIQUE'.

`SERIAL DEFAULT VALUE' in the definition of an integer column is an
alias for `NOT NULL AUTO_INCREMENT UNIQUE'.

*Warning*:

When you use subtraction between integer values where one is of type
`UNSIGNED', the result is unsigned unless the `NO_UNSIGNED_SUBTRACTION'
SQL mode is enabled. See *Note cast-functions::.

   * *Note `BIT[(M)]': bit-type.

     A bit-field type. M indicates the number of bits per value, from 1
     to 64. The default is 1 if M is omitted.

   * *Note `TINYINT[(M)] [UNSIGNED] [ZEROFILL]': integer-types.

     A very small integer. The signed range is `-128' to `127'. The
     unsigned range is `0' to `255'.

   * *Note `BOOL': integer-types, *Note `BOOLEAN': integer-types.

     These types are synonyms for *Note `TINYINT(1)': integer-types. A
     value of zero is considered false. Nonzero values are considered
     true:

          mysql> SELECT IF(0, 'true', 'false');
          +------------------------+
          | IF(0, 'true', 'false') |
          +------------------------+
          | false                  |
          +------------------------+

          mysql> SELECT IF(1, 'true', 'false');
          +------------------------+
          | IF(1, 'true', 'false') |
          +------------------------+
          | true                   |
          +------------------------+

          mysql> SELECT IF(2, 'true', 'false');
          +------------------------+
          | IF(2, 'true', 'false') |
          +------------------------+
          | true                   |
          +------------------------+

     However, the values `TRUE' and `FALSE' are merely aliases for `1'
     and `0', respectively, as shown here:

          mysql> SELECT IF(0 = FALSE, 'true', 'false');
          +--------------------------------+
          | IF(0 = FALSE, 'true', 'false') |
          +--------------------------------+
          | true                           |
          +--------------------------------+

          mysql> SELECT IF(1 = TRUE, 'true', 'false');
          +-------------------------------+
          | IF(1 = TRUE, 'true', 'false') |
          +-------------------------------+
          | true                          |
          +-------------------------------+

          mysql> SELECT IF(2 = TRUE, 'true', 'false');
          +-------------------------------+
          | IF(2 = TRUE, 'true', 'false') |
          +-------------------------------+
          | false                         |
          +-------------------------------+

          mysql> SELECT IF(2 = FALSE, 'true', 'false');
          +--------------------------------+
          | IF(2 = FALSE, 'true', 'false') |
          +--------------------------------+
          | false                          |
          +--------------------------------+

     The last two statements display the results shown because `2' is
     equal to neither `1' nor `0'.

   * *Note `SMALLINT[(M)] [UNSIGNED] [ZEROFILL]': integer-types.

     A small integer. The signed range is `-32768' to `32767'. The
     unsigned range is `0' to `65535'.

   * *Note `MEDIUMINT[(M)] [UNSIGNED] [ZEROFILL]': integer-types.

     A medium-sized integer. The signed range is `-8388608' to
     `8388607'.  The unsigned range is `0' to `16777215'.

   * *Note `INT[(M)] [UNSIGNED] [ZEROFILL]': integer-types.

     A normal-size integer. The signed range is `-2147483648' to
     `2147483647'. The unsigned range is `0' to `4294967295'.

   * *Note `INTEGER[(M)] [UNSIGNED] [ZEROFILL]': integer-types.

     This type is a synonym for *Note `INT': integer-types.

   * *Note `BIGINT[(M)] [UNSIGNED] [ZEROFILL]': integer-types.

     A large integer. The signed range is `-9223372036854775808' to
     `9223372036854775807'. The unsigned range is `0' to
     `18446744073709551615'.

     `SERIAL' is an alias for `BIGINT UNSIGNED NOT NULL AUTO_INCREMENT
     UNIQUE'.

     Some things you should be aware of with respect to *Note `BIGINT':
     integer-types. columns:

        * All arithmetic is done using signed *Note `BIGINT':
          integer-types. or *Note `DOUBLE': floating-point-types.
          values, so you should not use unsigned big integers larger
          than `9223372036854775807' (63 bits) except with bit
          functions! If you do that, some of the last digits in the
          result may be wrong because of rounding errors when
          converting a *Note `BIGINT': integer-types. value to a *Note
          `DOUBLE': floating-point-types.

          MySQL can handle *Note `BIGINT': integer-types.  in the
          following cases:

             * When using integers to store large unsigned values in a
               *Note `BIGINT': integer-types. column.

             * In `MIN(COL_NAME)' or `MAX(COL_NAME)', where COL_NAME
               refers to a *Note `BIGINT': integer-types. column.

             * When using operators (`+', `-', `*', and so on) where
               both operands are integers.

        * You can always store an exact integer value in a *Note
          `BIGINT': integer-types. column by storing it using a string.
          In this case, MySQL performs a string-to-number conversion
          that involves no intermediate double-precision representation.

        * The `-', `+', and `*' operators use *Note `BIGINT':
          integer-types.  arithmetic when both operands are integer
          values. This means that if you multiply two big integers (or
          results from functions that return integers), you may get
          unexpected results when the result is larger than
          `9223372036854775807'.

   * *Note `DECIMAL[(M[,D])] [UNSIGNED] [ZEROFILL]': fixed-point-types.

     A packed `exact' fixed-point number.  M is the total number of
     digits (the precision) and D is the number of digits after the
     decimal point (the scale). The decimal point and (for negative
     numbers) the ``-'' sign are not counted in M. If D is 0, values
     have no decimal point or fractional part. The maximum number of
     digits (M) for *Note `DECIMAL': fixed-point-types. is 65. The
     maximum number of supported decimals (D) is 30. If D is omitted,
     the default is 0. If M is omitted, the default is 10.

     `UNSIGNED', if specified, disallows negative values.

     All basic calculations (`+, -, *, /') with *Note `DECIMAL':
     fixed-point-types. columns are done with a precision of 65 digits.

   * *Note `DEC[(M[,D])] [UNSIGNED] [ZEROFILL]': fixed-point-types,
     *Note `NUMERIC[(M[,D])] [UNSIGNED] [ZEROFILL]': fixed-point-types,
     *Note `FIXED[(M[,D])] [UNSIGNED] [ZEROFILL]': fixed-point-types.

     These types are synonyms for *Note `DECIMAL': fixed-point-types.
     The *Note `FIXED': fixed-point-types. synonym is available for
     compatibility with other database systems.

   * *Note `FLOAT[(M,D)] [UNSIGNED] [ZEROFILL]': floating-point-types.

     A small (single-precision) floating-point number.  Permissible
     values are `-3.402823466E+38' to `-1.175494351E-38', `0', and
     `1.175494351E-38' to `3.402823466E+38'. These are the theoretical
     limits, based on the IEEE standard. The actual range might be
     slightly smaller depending on your hardware or operating system.

     M is the total number of digits and D is the number of digits
     following the decimal point. If M and D are omitted, values are
     stored to the limits permitted by the hardware. A single-precision
     floating-point number is accurate to approximately 7 decimal
     places.

     `UNSIGNED', if specified, disallows negative values.

     Using *Note `FLOAT': floating-point-types. might give you some
     unexpected problems because all calculations in MySQL are done
     with double precision. See *Note no-matching-rows::.

   * *Note `DOUBLE[(M,D)] [UNSIGNED] [ZEROFILL]': floating-point-types.

     A normal-size (double-precision) floating-point number.
     Permissible values are `-1.7976931348623157E+308' to
     `-2.2250738585072014E-308', `0', and `2.2250738585072014E-308' to
     `1.7976931348623157E+308'. These are the theoretical limits, based
     on the IEEE standard. The actual range might be slightly smaller
     depending on your hardware or operating system.

     M is the total number of digits and D is the number of digits
     following the decimal point. If M and D are omitted, values are
     stored to the limits permitted by the hardware. A double-precision
     floating-point number is accurate to approximately 15 decimal
     places.

     `UNSIGNED', if specified, disallows negative values.

   * *Note `DOUBLE PRECISION[(M,D)] [UNSIGNED] [ZEROFILL]':
     floating-point-types, *Note `REAL[(M,D)] [UNSIGNED] [ZEROFILL]':
     floating-point-types.

     These types are synonyms for *Note `DOUBLE': floating-point-types.
     Exception: If the `REAL_AS_FLOAT' SQL mode is enabled, *Note
     `REAL': floating-point-types. is a synonym for *Note `FLOAT':
     floating-point-types. rather than *Note `DOUBLE':
     floating-point-types.

   * *Note `FLOAT(P) [UNSIGNED] [ZEROFILL]': floating-point-types.

     A floating-point number. P represents the precision in bits, but
     MySQL uses this value only to determine whether to use *Note
     `FLOAT': floating-point-types. or *Note `DOUBLE':
     floating-point-types. for the resulting data type. If P is from 0
     to 24, the data type becomes *Note `FLOAT': floating-point-types.
     with no M or D values. If P is from 25 to 53, the data type
     becomes *Note `DOUBLE': floating-point-types. with no M or D
     values. The range of the resulting column is the same as for the
     single-precision *Note `FLOAT': floating-point-types. or
     double-precision *Note `DOUBLE': floating-point-types. data types
     described earlier in this section.

     *Note `FLOAT(P)': floating-point-types.  syntax is provided for
     ODBC compatibility.


File: manual.info,  Node: date-and-time-type-overview,  Next: string-type-overview,  Prev: numeric-type-overview,  Up: data-type-overview

11.1.2 Date and Time Type Overview
----------------------------------

A summary of the temporal data types follows. For additional
information about properties and storage requirements of the temporal
types, see *Note date-and-time-types::, and *Note
storage-requirements::. For descriptions of functions that operate on
temporal values, see *Note date-and-time-functions::.

For the *Note `DATE': datetime. and *Note `DATETIME': datetime. range
descriptions, `supported' means that although earlier values might
work, there is no guarantee.

   * *Note `DATE': datetime.

     A date. The supported range is `'1000-01-01'' to `'9999-12-31''.
     MySQL displays *Note `DATE': datetime. values in `'YYYY-MM-DD''
     format, but permits assignment of values to *Note `DATE': datetime.
     columns using either strings or numbers.

   * *Note `DATETIME': datetime.

     A date and time combination. The supported range is `'1000-01-01
     00:00:00'' to `'9999-12-31 23:59:59''. MySQL displays *Note
     `DATETIME': datetime. values in `'YYYY-MM-DD HH:MM:SS'' format,
     but permits assignment of values to *Note `DATETIME': datetime.
     columns using either strings or numbers.

   * *Note `TIMESTAMP': datetime.

     A timestamp. The range is `'1970-01-01 00:00:01'' UTC to
     `'2038-01-19 03:14:07'' UTC.  *Note `TIMESTAMP': datetime. values
     are stored as the number of seconds since the epoch (`'1970-01-01
     00:00:00'' UTC). A *Note `TIMESTAMP': datetime. cannot represent
     the value `'1970-01-01 00:00:00'' because that is equivalent to 0
     seconds from the epoch and the value 0 is reserved for
     representing `'0000-00-00 00:00:00'', the `zero' *Note
     `TIMESTAMP': datetime. value.

     Unless specified otherwise, the first *Note `TIMESTAMP': datetime.
     column in a table is defined to be automatically set to the date
     and time of the most recent modification if not explicitly
     assigned a value. This makes *Note `TIMESTAMP': datetime.  useful
     for recording the timestamp of an *Note `INSERT': insert. or *Note
     `UPDATE': update. operation. You can also set any *Note
     `TIMESTAMP': datetime. column to the current date and time by
     assigning it a `NULL' value, unless it has been defined with the
     `NULL' attribute to permit `NULL' values. The automatic
     initialization and updating to the current date and time can be
     specified using `DEFAULT CURRENT_TIMESTAMP' and `ON UPDATE
     CURRENT_TIMESTAMP' clauses, as described in *Note
     timestamp-initialization::.

     *Note*:

     The *Note `TIMESTAMP': datetime. format that was used prior to
     MySQL 4.1 is not supported in MySQL 5.5; see `MySQL 3.23, 4.0, 4.1
     Reference Manual' for information regarding the old format.

   * *Note `TIME': time.

     A time. The range is `'-838:59:59'' to `'838:59:59''. MySQL
     displays *Note `TIME': time. values in `'HH:MM:SS'' format, but
     permits assignment of values to *Note `TIME': time. columns using
     either strings or numbers.

   * *Note `YEAR[(2|4)]': year.

     A year in two-digit or four-digit format. The default is
     four-digit format. `YEAR(2)' or `YEAR(4)' differ in display
     format, but have the same range of values. In four-digit format,
     values display as `1901' to `2155', and `0000'. In two-digit
     format, values display as `70' to `69', representing years from
     1970 to 2069.  MySQL displays *Note `YEAR': year. values in `YYYY'
     or `YY'format, but permits assignment of values to *Note `YEAR':
     year. columns using either strings or numbers.

     *Note*:

     The `YEAR(2)' data type has certain issues that you should
     consider before choosing to use it.  As of MySQL 5.5.27, `YEAR(2)'
     is deprecated. For more information, see *Note
     migrating-to-year4::.

     For additional information about `YEAR' display format and
     interpretation of input values, see *Note year::.

The `SUM()' and `AVG()' aggregate functions do not work with temporal
values. (They convert the values to numbers, losing everything after
the first nonnumeric character.) To work around this problem, convert
to numeric units, perform the aggregate operation, and convert back to
a temporal value.  Examples:

     SELECT SEC_TO_TIME(SUM(TIME_TO_SEC(TIME_COL))) FROM TBL_NAME;
     SELECT FROM_DAYS(SUM(TO_DAYS(DATE_COL))) FROM TBL_NAME;

*Note*:

The MySQL server can be run with the `MAXDB' SQL mode enabled. In this
case, *Note `TIMESTAMP': datetime. is identical with *Note `DATETIME':
datetime. If this mode is enabled at the time that a table is created,
*Note `TIMESTAMP': datetime. columns are created as *Note `DATETIME':
datetime. columns. As a result, such columns use *Note `DATETIME':
datetime. display format, have the same range of values, and there is
no automatic initialization or updating to the current date and time.
See *Note server-sql-mode::.


File: manual.info,  Node: string-type-overview,  Prev: date-and-time-type-overview,  Up: data-type-overview

11.1.3 String Type Overview
---------------------------

A summary of the string data types follows. For additional information
about properties and storage requirements of the string types, see
*Note string-types::, and *Note storage-requirements::.

In some cases, MySQL may change a string column to a type different
from that given in a *Note `CREATE TABLE': create-table. or *Note
`ALTER TABLE': alter-table.  statement. See *Note
silent-column-changes::.

MySQL interprets length specifications in character column definitions
in character units. This applies to *Note `CHAR': char, *Note
`VARCHAR': char, and the *Note `TEXT': blob. types.

Column definitions for many string data types can include attributes
that specify the character set or collation of the column. These
attributes apply to the *Note `CHAR': char, *Note `VARCHAR': char, the
*Note `TEXT': blob. types, *Note `ENUM': enum, and *Note `SET': set.
data types:

   * The `CHARACTER SET' attribute specifies the character set, and the
     `COLLATE' attribute specifies a collation for the character set.
     For example:

          CREATE TABLE t
          (
              c1 VARCHAR(20) CHARACTER SET utf8,
              c2 TEXT CHARACTER SET latin1 COLLATE latin1_general_cs
          );

     This table definition creates a column named `c1' that has a
     character set of `utf8' with the default collation for that
     character set, and a column named `c2' that has a character set of
     `latin1' and a case-sensitive collation.

     The rules for assigning the character set and collation when
     either or both of the `CHARACTER SET' and `COLLATE' attributes are
     missing are described in *Note charset-column::.

     `CHARSET' is a synonym for `CHARACTER SET'.

   * Specifying the `CHARACTER SET binary' attribute for a character
     data type causes the column to be created as the corresponding
     binary data type: *Note `CHAR': char. becomes *Note `BINARY':
     binary-varbinary, *Note `VARCHAR': char. becomes *Note
     `VARBINARY': binary-varbinary, and *Note `TEXT': blob. becomes
     *Note `BLOB': blob. For the *Note `ENUM': enum. and *Note `SET':
     set. data types, this does not occur; they are created as
     declared. Suppose that you specify a table using this definition:

          CREATE TABLE t
          (
            c1 VARCHAR(10) CHARACTER SET binary,
            c2 TEXT CHARACTER SET binary,
            c3 ENUM('a','b','c') CHARACTER SET binary
          );

     The resulting table has this definition:

          CREATE TABLE t
          (
            c1 VARBINARY(10),
            c2 BLOB,
            c3 ENUM('a','b','c') CHARACTER SET binary
          );

   * The `ASCII' attribute is shorthand for `CHARACTER SET latin1'.

   * The `UNICODE' attribute is shorthand for `CHARACTER SET ucs2'.

   * The `BINARY' attribute is shorthand for specifying the binary
     collation of the column character set.  In this case, sorting and
     comparison are based on numeric character values.

Character column sorting and comparison are based on the character set
assigned to the column. For the *Note `CHAR': char, *Note `VARCHAR':
char, *Note `TEXT': blob, *Note `ENUM': enum, and *Note `SET': set.
data types, you can declare a column with a binary collation or the
`BINARY' attribute to cause sorting and comparison to use the underlying
character code values rather than a lexical ordering.

*Note charset::, provides additional information about use of character
sets in MySQL.

   * `[NATIONAL] CHAR[(M)] [CHARACTER SET CHARSET_NAME] [COLLATE
     COLLATION_NAME]'

     A fixed-length string that is always right-padded with spaces to
     the specified length when stored.  M represents the column length
     in characters. The range of M is 0 to 255. If M is omitted, the
     length is 1.

     *Note*:

     Trailing spaces are removed when *Note `CHAR': char. values are
     retrieved unless the `PAD_CHAR_TO_FULL_LENGTH' SQL mode is enabled.

     *Note `CHAR': char. is shorthand for *Note `CHARACTER': char.
     *Note `NATIONAL CHAR': char. (or its equivalent short form, *Note
     `NCHAR': char.)  is the standard SQL way to define that a *Note
     `CHAR': char. column should use some predefined character set.
     MySQL 4.1 and up uses `utf8' as this predefined character set.
     *Note charset-national::.

     The *Note `CHAR BYTE': binary-varbinary. data type is an alias for
     the *Note `BINARY': binary-varbinary. data type. This is a
     compatibility feature.

     MySQL permits you to create a column of type `CHAR(0)'. This is
     useful primarily when you have to be compliant with old
     applications that depend on the existence of a column but that do
     not actually use its value. `CHAR(0)' is also quite nice when you
     need a column that can take only two values: A column that is
     defined as `CHAR(0) NULL' occupies only one bit and can take only
     the values `NULL' and `''' (the empty string).

   * `[NATIONAL] VARCHAR(M) [CHARACTER SET CHARSET_NAME] [COLLATE
     COLLATION_NAME]'

     A variable-length string. M represents the maximum column length
     in characters. The range of M is 0 to 65,535. The effective
     maximum length of a *Note `VARCHAR': char. is subject to the
     maximum row size (65,535 bytes, which is shared among all columns)
     and the character set used. For example, `utf8' characters can
     require up to three bytes per character, so a *Note `VARCHAR':
     char. column that uses the `utf8' character set can be declared to
     be a maximum of 21,844 characters. See *Note column-count-limit::.

     MySQL stores *Note `VARCHAR': char. values as a 1-byte or 2-byte
     length prefix plus data. The length prefix indicates the number of
     bytes in the value. A *Note `VARCHAR': char. column uses one
     length byte if values require no more than 255 bytes, two length
     bytes if values may require more than 255 bytes.

     *Note*:

     MySQL 5.5 follows the standard SQL specification, and does _not_
     remove trailing spaces from *Note `VARCHAR': char. values.

     *Note `VARCHAR': char. is shorthand for *Note `CHARACTER VARYING':
     char.  *Note `NATIONAL VARCHAR': char. is the standard SQL way to
     define that a *Note `VARCHAR': char. column should use some
     predefined character set. MySQL 4.1 and up uses `utf8' as this
     predefined character set.  *Note charset-national::.  *Note
     `NVARCHAR': char. is shorthand for *Note `NATIONAL VARCHAR': char.

   * *Note `BINARY(M)': binary-varbinary.

     The *Note `BINARY': binary-varbinary. type is similar to the *Note
     `CHAR': char. type, but stores binary byte strings rather than
     nonbinary character strings.  M represents the column length in
     bytes.

   * *Note `VARBINARY(M)': binary-varbinary.

     The *Note `VARBINARY': binary-varbinary. type is similar to the
     *Note `VARCHAR': char. type, but stores binary byte strings rather
     than nonbinary character strings. M represents the maximum column
     length in bytes.

   * *Note `TINYBLOB': blob.

     A *Note `BLOB': blob. column with a maximum length of 255 (2^8 - 1)
     bytes. Each *Note `TINYBLOB': blob. value is stored using a 1-byte
     length prefix that indicates the number of bytes in the value.

   * *Note `TINYTEXT [CHARACTER SET CHARSET_NAME] [COLLATE
     COLLATION_NAME]': blob.

     A *Note `TEXT': blob. column with a maximum length of 255 (2^8 - 1)
     characters. The effective maximum length is less if the value
     contains multi-byte characters. Each *Note `TINYTEXT': blob. value
     is stored using a 1-byte length prefix that indicates the number of
     bytes in the value.

   * *Note `BLOB[(M)]': blob.

     A *Note `BLOB': blob. column with a maximum length of 65,535 (2^16
     - 1) bytes. Each *Note `BLOB': blob. value is stored using a
     2-byte length prefix that indicates the number of bytes in the
     value.

     An optional length M can be given for this type. If this is done,
     MySQL creates the column as the smallest *Note `BLOB': blob. type
     large enough to hold values M bytes long.

   * *Note `TEXT[(M)] [CHARACTER SET CHARSET_NAME] [COLLATE
     COLLATION_NAME]': blob.

     A *Note `TEXT': blob. column with a maximum length of 65,535 (2^16
     - 1) characters. The effective maximum length is less if the value
     contains multi-byte characters. Each *Note `TEXT': blob. value is
     stored using a 2-byte length prefix that indicates the number of
     bytes in the value.

     An optional length M can be given for this type. If this is done,
     MySQL creates the column as the smallest *Note `TEXT': blob. type
     large enough to hold values M characters long.

   * *Note `MEDIUMBLOB': blob.

     A *Note `BLOB': blob. column with a maximum length of 16,777,215
     (2^24 - 1) bytes. Each *Note `MEDIUMBLOB': blob.  value is stored
     using a 3-byte length prefix that indicates the number of bytes in
     the value.

   * *Note `MEDIUMTEXT [CHARACTER SET CHARSET_NAME] [COLLATE
     COLLATION_NAME]': blob.

     A *Note `TEXT': blob. column with a maximum length of 16,777,215
     (2^24 - 1) characters. The effective maximum length is less if the
     value contains multi-byte characters. Each *Note `MEDIUMTEXT':
     blob. value is stored using a 3-byte length prefix that indicates
     the number of bytes in the value.

   * *Note `LONGBLOB': blob.

     A *Note `BLOB': blob. column with a maximum length of
     4,294,967,295 or 4GB (2^32 - 1) bytes. The effective maximum
     length of *Note `LONGBLOB': blob. columns depends on the
     configured maximum packet size in the client/server protocol and
     available memory. Each *Note `LONGBLOB': blob. value is stored
     using a 4-byte length prefix that indicates the number of bytes in
     the value.

   * *Note `LONGTEXT [CHARACTER SET CHARSET_NAME] [COLLATE
     COLLATION_NAME]': blob.

     A *Note `TEXT': blob. column with a maximum length of
     4,294,967,295 or 4GB (2^32 - 1) characters. The effective maximum
     length is less if the value contains multi-byte characters. The
     effective maximum length of *Note `LONGTEXT': blob.  columns also
     depends on the configured maximum packet size in the client/server
     protocol and available memory. Each *Note `LONGTEXT': blob.  value
     is stored using a 4-byte length prefix that indicates the number
     of bytes in the value.

   * *Note `ENUM('VALUE1','VALUE2',...) [CHARACTER SET CHARSET_NAME]
     [COLLATE COLLATION_NAME]': enum.

     An enumeration. A string object that can have only one value,
     chosen from the list of values `'VALUE1'', `'VALUE2'', `...',
     `NULL' or the special `''' error value.  *Note `ENUM': enum.
     values are represented internally as integers.

     An *Note `ENUM': enum. column can have a maximum of 65,535
     distinct elements. (The practical limit is less than 3000.) A
     table can have no more than 255 unique element list definitions
     among its *Note `ENUM': enum. and *Note `SET': set. columns
     considered as a group. For more information on these limits, see
     *Note limits-frm-file::.

   * *Note `SET('VALUE1','VALUE2',...) [CHARACTER SET CHARSET_NAME]
     [COLLATE COLLATION_NAME]': set.

     A set. A string object that can have zero or more values, each of
     which must be chosen from the list of values `'VALUE1'',
     `'VALUE2'', `...' *Note `SET': set.  values are represented
     internally as integers.

     A *Note `SET': set. column can have a maximum of 64 distinct
     members. A table can have no more than 255 unique element list
     definitions among its *Note `ENUM': enum. and *Note `SET': set.
     columns considered as a group. For more information on this limit,
     see *Note limits-frm-file::.


File: manual.info,  Node: numeric-types,  Next: date-and-time-types,  Prev: data-type-overview,  Up: data-types

11.2 Numeric Types
==================

* Menu:

* integer-types::                Integer Types (Exact Value) - `INTEGER', `INT', `SMALLINT', `TINYINT', `MEDIUMINT', `BIGINT'
* fixed-point-types::            Fixed-Point Types (Exact Value) - `DECIMAL', `NUMERIC'
* floating-point-types::         Floating-Point Types (Approximate Value) - `FLOAT', `DOUBLE'
* bit-type::                     Bit-Value Type - `BIT'
* numeric-type-attributes::      Numeric Type Attributes
* out-of-range-and-overflow::    Out-of-Range and Overflow Handling

MySQL supports all standard SQL numeric data types. These types include
the exact numeric data types (*Note `INTEGER': integer-types, *Note
`SMALLINT': integer-types, *Note `DECIMAL': fixed-point-types, and
*Note `NUMERIC': fixed-point-types.), as well as the approximate
numeric data types (*Note `FLOAT': floating-point-types, *Note `REAL':
floating-point-types, and *Note `DOUBLE PRECISION':
floating-point-types.). The keyword *Note `INT': integer-types. is a
synonym for *Note `INTEGER': integer-types, and the keywords *Note
`DEC': fixed-point-types. and *Note `FIXED': fixed-point-types. are
synonyms for *Note `DECIMAL': fixed-point-types. MySQL treats *Note
`DOUBLE': floating-point-types. as a synonym for *Note `DOUBLE
PRECISION': floating-point-types. (a nonstandard extension). MySQL also
treats *Note `REAL': floating-point-types.  as a synonym for *Note
`DOUBLE PRECISION': floating-point-types.  (a nonstandard variation),
unless the `REAL_AS_FLOAT' SQL mode is enabled.

The *Note `BIT': bit-type. data type stores bit-field values and is
supported for *Note `MyISAM': myisam-storage-engine, *Note `MEMORY':
memory-storage-engine, *Note `InnoDB': innodb-storage-engine, and *Note
`NDBCLUSTER': mysql-cluster. tables.

For information about how MySQL handles assignment of out-of-range
values to columns and overflow during expression evaluation, see *Note
out-of-range-and-overflow::.

For information about numeric type storage requirements, see *Note
storage-requirements::.

The data type used for the result of a calculation on numeric operands
depends on the types of the operands and the operations performed on
them. For more information, see *Note arithmetic-functions::.


File: manual.info,  Node: integer-types,  Next: fixed-point-types,  Prev: numeric-types,  Up: numeric-types

11.2.1 Integer Types (Exact Value) - `INTEGER', `INT', `SMALLINT', `TINYINT', `MEDIUMINT', `BIGINT'
---------------------------------------------------------------------------------------------------

MySQL supports the SQL standard integer types `INTEGER' (or `INT') and
`SMALLINT'. As an extension to the standard, MySQL also supports the
integer types `TINYINT', `MEDIUMINT', and `BIGINT'. The following table
shows the required storage and range for each integer type.

This table shows required storage and range for integer types supported
by MySQL.

Type        Storage     Minimum Value             Maximum Value
            (Bytes)     (Signed/Unsigned)         Signed/Unsigned)
`TINYINT'   1           `-128'                    `127'
                        `0'                       `255'
`SMALLINT'  2           `-32768'                  `32767'
                        `0'                       `65535'
`MEDIUMINT' 3           `-8388608'                `8388607'
                        `0'                       `16777215'
`INT'       4           `-2147483648'             `2147483647'
                        `0'                       `4294967295'
`BIGINT'    8           `-9223372036854775808'    `9223372036854775807'
                        `0'                       `18446744073709551615'


File: manual.info,  Node: fixed-point-types,  Next: floating-point-types,  Prev: integer-types,  Up: numeric-types

11.2.2 Fixed-Point Types (Exact Value) - `DECIMAL', `NUMERIC'
-------------------------------------------------------------

The `DECIMAL' and `NUMERIC' types store exact numeric data values.
These types are used when it is important to preserve exact precision,
for example with monetary data. In MySQL, `NUMERIC' is implemented as
`DECIMAL', so the following remarks about `DECIMAL' apply equally to
`NUMERIC'.

MySQL 5.5 stores `DECIMAL' values in binary format. See *Note
precision-math::.

In a `DECIMAL' column declaration, the precision and scale can be (and
usually is) specified; for example:

     salary DECIMAL(5,2)

In this example, `5' is the precision and `2' is the scale. The
precision represents the number of significant digits that are stored
for values, and the scale represents the number of digits that can be
stored following the decimal point.

Standard SQL requires that `DECIMAL(5,2)' be able to store any value
with five digits and two decimals, so values that can be stored in the
`salary' column range from `-999.99' to `999.99'.

In standard SQL, the syntax `DECIMAL(M)' is equivalent to
`DECIMAL(M,0)'.  Similarly, the syntax `DECIMAL' is equivalent to
`DECIMAL(M,0)', where the implementation is permitted to decide the
value of M. MySQL supports both of these variant forms of `DECIMAL'
syntax. The default value of M is 10.

If the scale is 0, `DECIMAL' values contain no decimal point or
fractional part.

The maximum number of digits for `DECIMAL' is 65, but the actual range
for a given `DECIMAL' column can be constrained by the precision or
scale for a given column. When such a column is assigned a value with
more digits following the decimal point than are permitted by the
specified scale, the value is converted to that scale. (The precise
behavior is operating system-specific, but generally the effect is
truncation to the permissible number of digits.)


File: manual.info,  Node: floating-point-types,  Next: bit-type,  Prev: fixed-point-types,  Up: numeric-types

11.2.3 Floating-Point Types (Approximate Value) - `FLOAT', `DOUBLE'
-------------------------------------------------------------------

The `FLOAT' and `DOUBLE' types represent approximate numeric data
values. MySQL uses four bytes for single-precision values and eight
bytes for double-precision values.

For `FLOAT', the SQL standard permits an optional specification of the
precision (but not the range of the exponent) in bits following the
keyword `FLOAT' in parentheses. MySQL also supports this optional
precision specification, but the precision value is used only to
determine storage size. A precision from 0 to 23 results in a 4-byte
single-precision `FLOAT' column. A precision from 24 to 53 results in
an 8-byte double-precision `DOUBLE' column.

MySQL permits a nonstandard syntax: `FLOAT(M,D)' or `REAL(M,D)' or
`DOUBLE PRECISION(M,D)'.  Here, ``(M,D)'' means than values can be
stored with up to M digits in total, of which D digits may be after the
decimal point. For example, a column defined as `FLOAT(7,4)' will look
like `-999.9999' when displayed. MySQL performs rounding when storing
values, so if you insert `999.00009' into a `FLOAT(7,4)' column, the
approximate result is `999.0001'.

Because floating-point values are approximate and not stored as exact
values, attempts to treat them as exact in comparisons may lead to
problems. They are also subject to platform or implementation
dependencies. For more information, see *Note problems-with-float::

For maximum portability, code requiring storage of approximate numeric
data values should use `FLOAT' or `DOUBLE PRECISION' with no
specification of precision or number of digits.


File: manual.info,  Node: bit-type,  Next: numeric-type-attributes,  Prev: floating-point-types,  Up: numeric-types

11.2.4 Bit-Value Type - `BIT'
-----------------------------

The `BIT' data type is used to store bit-field values. A type of
`BIT(M)' enables storage of M-bit values.  M can range from 1 to 64.

To specify bit values, `b'VALUE'' notation can be used. VALUE is a
binary value written using zeros and ones. For example, `b'111'' and
`b'10000000'' represent 7 and 128, respectively. See *Note
bit-field-literals::.

If you assign a value to a `BIT(M)' column that is less than M bits
long, the value is padded on the left with zeros. For example,
assigning a value of `b'101'' to a `BIT(6)' column is, in effect, the
same as assigning `b'000101''.


File: manual.info,  Node: numeric-type-attributes,  Next: out-of-range-and-overflow,  Prev: bit-type,  Up: numeric-types

11.2.5 Numeric Type Attributes
------------------------------

MySQL supports an extension for optionally specifying the display width
of integer data types in parentheses following the base keyword for the
type. For example, *Note `INT(4)': integer-types. specifies an *Note
`INT': integer-types. with a display width of four digits. This
optional display width may be used by applications to display integer
values having a width less than the width specified for the column by
left-padding them with spaces. (That is, this width is present in the
metadata returned with result sets. Whether it is used or not is up to
the application.)

The display width does _not_ constrain the range of values that can be
stored in the column. Nor does it prevent values wider than the column
display width from being displayed correctly. For example, a column
specified as *Note `SMALLINT(3)': integer-types. has the usual *Note
`SMALLINT': integer-types. range of `-32768' to `32767', and values
outside the range permitted by three digits are displayed in full using
more than three digits.

When used in conjunction with the optional (nonstandard) attribute
`ZEROFILL', the default padding of spaces is replaced with zeros. For
example, for a column declared as *Note `INT(4) ZEROFILL':
integer-types, a value of `5' is retrieved as `0005'.

*Note*:

The `ZEROFILL' attribute is ignored when a column is involved in
expressions or *Note `UNION': union. queries.

If you store values larger than the display width in an integer column
that has the `ZEROFILL' attribute, you may experience problems when
MySQL generates temporary tables for some complicated joins. In these
cases, MySQL assumes that the data values fit within the column display
width.

All integer types can have an optional (nonstandard) attribute
`UNSIGNED'. Unsigned type can be used to permit only nonnegative
numbers in a column or when you need a larger upper numeric range for
the column. For example, if an *Note `INT': integer-types. column is
`UNSIGNED', the size of the column's range is the same but its
endpoints shift from `-2147483648' and `2147483647' up to `0' and
`4294967295'.

Floating-point and fixed-point types also can be `UNSIGNED'. As with
integer types, this attribute prevents negative values from being
stored in the column. Unlike the integer types, the upper range of
column values remains the same.

If you specify `ZEROFILL' for a numeric column, MySQL automatically
adds the `UNSIGNED' attribute to the column.

Integer or floating-point data types can have the additional attribute
`AUTO_INCREMENT'. When you insert a value of `NULL' (recommended) or
`0' into an indexed `AUTO_INCREMENT' column, the column is set to the
next sequence value. Typically this is `VALUE+1', where VALUE is the
largest value for the column currently in the table. `AUTO_INCREMENT'
sequences begin with `1'.

As of MySQL 5.5.29, negative values for `AUTO_INCREMENT' columns are
not supported.


File: manual.info,  Node: out-of-range-and-overflow,  Prev: numeric-type-attributes,  Up: numeric-types

11.2.6 Out-of-Range and Overflow Handling
-----------------------------------------

When MySQL stores a value in a numeric column that is outside the
permissible range of the column data type, the result depends on the
SQL mode in effect at the time:

   * If strict SQL mode is enabled, MySQL rejects the out-of-range
     value with an error, and the insert fails, in accordance with the
     SQL standard.

   * If no restrictive modes are enabled, MySQL clips the value to the
     appropriate endpoint of the range and stores the resulting value
     instead.

     When an out-of-range value is assigned to an integer column, MySQL
     stores the value representing the corresponding endpoint of the
     column data type range. If you store 256 into a *Note `TINYINT':
     integer-types. or `TINYINT UNSIGNED' column, MySQL stores 127 or
     255, respectively.

     When a floating-point or fixed-point column is assigned a value
     that exceeds the range implied by the specified (or default)
     precision and scale, MySQL stores the value representing the
     corresponding endpoint of that range.

Column-assignment conversions that occur due to clipping when MySQL is
not operating in strict mode are reported as warnings for *Note `ALTER
TABLE': alter-table, *Note `LOAD DATA INFILE': load-data, *Note
`UPDATE': update, and multiple-row *Note `INSERT': insert. statements.
In strict mode, these statements fail, and some or all the values will
not be inserted or changed, depending on whether the table is a
transactional table and other factors. For details, see *Note
server-sql-mode::.

As of MySQL 5.5.5, overflow during numeric expression evaluation
results in an error. For example, the largest signed *Note `BIGINT':
integer-types. value is 9223372036854775807, so the following
expression produces an error:

     mysql> SELECT 9223372036854775807 + 1;
     ERROR 1690 (22003): BIGINT value is out of range in '(9223372036854775807 + 1)'

To enable the operation to succeed in this case, convert the value to
unsigned;

     mysql> SELECT CAST(9223372036854775807 AS UNSIGNED) + 1;
     +-------------------------------------------+
     | CAST(9223372036854775807 AS UNSIGNED) + 1 |
     +-------------------------------------------+
     |                       9223372036854775808 |
     +-------------------------------------------+

Whether overflow occurs depends on the range of the operands, so
another way to handle the preceding expression is to use exact-value
arithmetic because *Note `DECIMAL': fixed-point-types. values have a
larger range than integers:

     mysql> SELECT 9223372036854775807.0 + 1;
     +---------------------------+
     | 9223372036854775807.0 + 1 |
     +---------------------------+
     |     9223372036854775808.0 |
     +---------------------------+

Before MySQL 5.5.5, overflow handling during numeric expression
evaluation depends on the types of the operands:

   * Integer overflow results in silent wraparound.

   * `DECIMAL' overflow results in a truncated result and a warning.

   * Floating-point overflow produces a `NULL' result.

Subtraction between integer values, where one is of type `UNSIGNED',
produces an unsigned result by default. Prior to MySQL 5.5.5, if the
result would otherwise have been negative, it becomes the maximum
integer value:

     mysql> SET sql_mode = '';
     mysql> SELECT CAST(0 AS UNSIGNED) - 1;
     +-------------------------+
     | CAST(0 AS UNSIGNED) - 1 |
     +-------------------------+
     |    18446744073709551615 |
     +-------------------------+

As of MySQL 5.5.5, if the result would otherwise have been negative, an
error results:

     mysql> SET sql_mode = '';
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT CAST(0 AS UNSIGNED) - 1;
     `ERROR 1690 (22003): BIGINT UNSIGNED value is out of range in '(cast(0 as unsigned) - 1)''

If the `NO_UNSIGNED_SUBTRACTION' SQL mode is enabled, the result is
negative:

     mysql> SET sql_mode = 'NO_UNSIGNED_SUBTRACTION';
     mysql> SELECT CAST(0 AS UNSIGNED) - 1;
     +-------------------------+
     | CAST(0 AS UNSIGNED) - 1 |
     +-------------------------+
     |                      -1 |
     +-------------------------+

If the result of such an operation is used to update an `UNSIGNED'
integer column, the result is clipped to the maximum value for the
column type, or clipped to 0 if `NO_UNSIGNED_SUBTRACTION' is enabled.
If strict SQL mode is enabled, an error occurs and the column remains
unchanged.


File: manual.info,  Node: date-and-time-types,  Next: string-types,  Prev: numeric-types,  Up: data-types

11.3 Date and Time Types
========================

* Menu:

* datetime::                     The `DATE', `DATETIME', and `TIMESTAMP' Types
* time::                         The `TIME' Type
* year::                         The `YEAR' Type
* migrating-to-year4::           `YEAR(2)' Limitations and Migrating to `YEAR(4)'
* timestamp-initialization::     Automatic Initialization and Updating for `TIMESTAMP'
* fractional-seconds::           Fractional Seconds in Time Values
* date-and-time-type-conversion::  Conversion Between Date and Time Types
* two-digit-years::              Two-Digit Years in Dates

The date and time types for representing temporal values are *Note
`DATE': datetime, *Note `TIME': time, *Note `DATETIME': datetime, *Note
`TIMESTAMP': datetime, and *Note `YEAR': year. Each temporal type has a
range of valid values, as well as a `zero' value that may be used when
you specify an invalid value that MySQL cannot represent. The *Note
`TIMESTAMP': datetime. type has special automatic updating behavior,
described later. For temporal type storage requirements, see *Note
storage-requirements::.

Keep in mind these general considerations when working with date and
time types:

   * MySQL retrieves values for a given date or time type in a standard
     output format, but it attempts to interpret a variety of formats
     for input values that you supply (for example, when you specify a
     value to be assigned to or compared to a date or time type). For a
     description of the permitted formats for date and time types, see
     *Note date-and-time-literals::. It is expected that you supply
     valid values. Unpredictable results may occur if you use values in
     other formats.

   * Although MySQL tries to interpret values in several formats, date
     parts must always be given in year-month-day order (for example,
     `'98-09-04''), rather than in the month-day-year or day-month-year
     orders commonly used elsewhere (for example, `'09-04-98'',
     `'04-09-98'').

   * Dates containing two-digit year values are ambiguous because the
     century is unknown. MySQL interprets two-digit year values using
     these rules:

        * Year values in the range `70-99' are converted to `1970-1999'.

        * Year values in the range `00-69' are converted to `2000-2069'.

     See also *Note two-digit-years::.

   * Conversion of values from one temporal type to another occurs
     according to the rules in *Note date-and-time-type-conversion::.

   * MySQL automatically converts a date or time value to a number if
     the value is used in a numeric context and vice versa.

   * By default, when MySQL encounters a value for a date or time type
     that is out of range or otherwise invalid for the type, it
     converts the value to the `zero' value for that type. The
     exception is that out-of-range *Note `TIME': time. values are
     clipped to the appropriate endpoint of the *Note `TIME': time.
     range.

   * By setting the SQL mode to the appropriate value, you can specify
     more exactly what kind of dates you want MySQL to support. (See
     *Note server-sql-mode::.) You can get MySQL to accept certain
     dates, such as `'2009-11-31'', by enabling the
     `ALLOW_INVALID_DATES' SQL mode. This is useful when you want to
     store a `possibly wrong' value which the user has specified (for
     example, in a web form) in the database for future processing.
     Under this mode, MySQL verifies only that the month is in the range
     from 1 to 12 and that the day is in the range from 1 to 31.

   * MySQL permits you to store dates where the day or month and day
     are zero in a *Note `DATE': datetime. or *Note `DATETIME':
     datetime. column. This is extremely useful for applications that
     need to store birthdates for which you may not know the exact
     date. In this case, you simply store the date as `'2009-00-00'' or
     `'2009-01-00''. If you store dates such as these, you should not
     expect to get correct results for functions such as `DATE_SUB()' or
     `DATE_ADD()' that require complete dates. To disallow zero month
     or day parts in dates, enable the `NO_ZERO_IN_DATE' SQL mode.

   * MySQL permits you to store a `zero' value of `'0000-00-00'' as a
     `dummy date.' This is in some cases more convenient than using
     `NULL' values, and uses less data and index space. To disallow
     `'0000-00-00'', enable the `NO_ZERO_DATE' SQL mode.

   * `Zero' date or time values used through Connector/ODBC are
     converted automatically to `NULL' because ODBC cannot handle such
     values.

The following table shows the format of the `zero' value for each type.
The `zero' values are special, but you can store or refer to them
explicitly using the values shown in the table. You can also do this
using the values `'0'' or `0', which are easier to write. For temporal
types that include a date part (*Note `DATE': datetime, *Note
`DATETIME': datetime, and *Note `TIMESTAMP': datetime.), use of these
values produces warnings if the `NO_ZERO_DATE' SQL mode is enabled.

This table shows the format of the `zero' value for temporal data types.

Data Type              `Zero' Value
*Note `DATE':          `'0000-00-00''
datetime.              
*Note `TIME': time.    `'00:00:00''
*Note `DATETIME':      `'0000-00-00 00:00:00''
datetime.              
*Note `TIMESTAMP':     `'0000-00-00 00:00:00''
datetime.              
*Note `YEAR': year.    `0000'


File: manual.info,  Node: datetime,  Next: time,  Prev: date-and-time-types,  Up: date-and-time-types

11.3.1 The `DATE', `DATETIME', and `TIMESTAMP' Types
----------------------------------------------------

The `DATE', `DATETIME', and `TIMESTAMP' types are related. This section
describes their characteristics, how they are similar, and how they
differ. MySQL recognizes `DATE', `DATETIME', and `TIMESTAMP' values in
several formats, described in *Note date-and-time-literals::. For the
`DATE' and `DATETIME' range descriptions, `supported' means that
although earlier values might work, there is no guarantee.

The `DATE' type is used for values with a date part but no time part.
MySQL retrieves and displays `DATE' values in `'YYYY-MM-DD'' format.
The supported range is `'1000-01-01'' to `'9999-12-31''.

The `DATETIME' type is used for values that contain both date and time
parts. MySQL retrieves and displays `DATETIME' values in `'YYYY-MM-DD
HH:MM:SS'' format. The supported range is `'1000-01-01 00:00:00'' to
`'9999-12-31 23:59:59''.

The `TIMESTAMP' data type is used for values that contain both date and
time parts.  `TIMESTAMP' has a range of `'1970-01-01 00:00:01'' UTC to
`'2038-01-19 03:14:07'' UTC.

MySQL converts `TIMESTAMP' values from the current time zone to UTC for
storage, and back from UTC to the current time zone for retrieval.
(This does not occur for other types such as `DATETIME'.) By default,
the current time zone for each connection is the server's time. The
time zone can be set on a per-connection basis. As long as the time
zone setting remains constant, you get back the same value you store.
If you store a `TIMESTAMP' value, and then change the time zone and
retrieve the value, the retrieved value is different from the value you
stored. This occurs because the same time zone was not used for
conversion in both directions. The current time zone is available as
the value of the `time_zone' system variable. For more information, see
*Note time-zone-support::.

The `TIMESTAMP' data type offers automatic initialization and updating
to the current date and time. For more information, see *Note
timestamp-initialization::.

A `DATETIME' or `TIMESTAMP' value can include a trailing fractional
seconds part in up to microseconds (6 digits) precision. Although this
fractional part is recognized, it is discarded from values stored into
`DATETIME' or `TIMESTAMP' columns. For information about fractional
seconds support in MySQL, see *Note fractional-seconds::.

Invalid `DATE', `DATETIME', or `TIMESTAMP' values are converted to the
`zero' value of the appropriate type (`'0000-00-00'' or `'0000-00-00
00:00:00'').

Be aware of certain properties of date value interpretation in MySQL:

   * MySQL permits a `relaxed' format for values specified as strings,
     in which any punctuation character may be used as the delimiter
     between date parts or time parts.  In some cases, this syntax can
     be deceiving. For example, a value such as `'10:11:12'' might look
     like a time value because of the ``:'' delimiter, but is
     interpreted as the year `'2010-11-12'' if used in a date context.
     The value `'10:45:15'' is converted to `'0000-00-00'' because
     `'45'' is not a valid month.

   * The server requires that month and day values be valid, and not
     merely in the range 1 to 12 and 1 to 31, respectively.  With
     strict mode disabled, invalid dates such as `'2004-04-31'' are
     converted to `'0000-00-00'' and a warning is generated.  With
     strict mode enabled, invalid dates generate an error.  To permit
     such dates, enable `ALLOW_INVALID_DATES'. See *Note
     server-sql-mode::, for more information.

   * MySQL does not accept `TIMESTAMP' values that include a zero in
     the day or month column or values that are not a valid date. The
     sole exception to this rule is the special `zero' value
     `'0000-00-00 00:00:00''.

   * Dates containing two-digit year values are ambiguous because the
     century is unknown. MySQL interprets two-digit year values using
     these rules:

        * Year values in the range `00-69' are converted to `2000-2069'.

        * Year values in the range `70-99' are converted to `1970-1999'.

     See also *Note two-digit-years::.

*Note*:

The MySQL server can be run with the `MAXDB' SQL mode enabled. In this
case, `TIMESTAMP' is identical with `DATETIME'. If this mode is enabled
at the time that a table is created, `TIMESTAMP' columns are created as
`DATETIME' columns. As a result, such columns use `DATETIME' display
format, have the same range of values, and there is no automatic
initialization or updating to the current date and time. See *Note
server-sql-mode::.


File: manual.info,  Node: time,  Next: year,  Prev: datetime,  Up: date-and-time-types

11.3.2 The `TIME' Type
----------------------

MySQL retrieves and displays `TIME' values in `'HH:MM:SS'' format (or
`'HHH:MM:SS'' format for large hours values).  `TIME' values may range
from `'-838:59:59'' to `'838:59:59''. The hours part may be so large
because the `TIME' type can be used not only to represent a time of day
(which must be less than 24 hours), but also elapsed time or a time
interval between two events (which may be much greater than 24 hours,
or even negative).

MySQL recognizes `TIME' values in several formats, described in *Note
date-and-time-literals::.  Some of these formats can include a trailing
fractional seconds part in up to microseconds (6 digits) precision.
Although this fractional part is recognized, it is discarded from values
stored into `TIME' columns. For information about fractional seconds
support in MySQL, see *Note fractional-seconds::.

Be careful about assigning abbreviated values to a `TIME' column. MySQL
interprets abbreviated `TIME' values with colons as time of the day.
That is, `'11:12'' means `'11:12:00'', not `'00:11:12''. MySQL
interprets abbreviated values without colons using the assumption that
the two rightmost digits represent seconds (that is, as elapsed time
rather than as time of day). For example, you might think of `'1112''
and `1112' as meaning `'11:12:00'' (12 minutes after 11 o'clock), but
MySQL interprets them as `'00:11:12'' (11 minutes, 12 seconds).
Similarly, `'12'' and `12' are interpreted as `'00:00:12''.

By default, values that lie outside the `TIME' range but are otherwise
valid are clipped to the closest endpoint of the range. For example,
`'-850:00:00'' and `'850:00:00'' are converted to `'-838:59:59'' and
`'838:59:59''. Invalid `TIME' values are converted to `'00:00:00''.
Note that because `'00:00:00'' is itself a valid `TIME' value, there is
no way to tell, from a value of `'00:00:00'' stored in a table, whether
the original value was specified as `'00:00:00'' or whether it was
invalid.

For more restrictive treatment of invalid `TIME' values, enable strict
SQL mode to cause errors to occur. See *Note server-sql-mode::.


File: manual.info,  Node: year,  Next: migrating-to-year4,  Prev: time,  Up: date-and-time-types

11.3.3 The `YEAR' Type
----------------------

The `YEAR' type is a 1-byte type used to represent year values. It can
be declared as `YEAR(4)' or `YEAR(2)' to specify a display width of
four or two characters. The default is four characters if no width is
given.

*Note*:

The `YEAR(2)' data type has certain issues that you should consider
before choosing to use it. As of MySQL 5.5.27, `YEAR(2)' is deprecated.
For more information, see *Note migrating-to-year4::.

`YEAR(4)' and `YEAR(2)' differ in display format, but have the same
range of values. For 4-digit format, MySQL displays `YEAR' values in
`YYYY' format, with a range of `1901' to `2155', or `0000'. For 2-digit
format, MySQL displays only the last two (least significant) digits;
for example, `70' (1970 or 2070) or `69' (2069).

You can specify input `YEAR' values in a variety of formats:

   * As a 4-digit string in the range `'1901'' to `'2155''.

   * As a 4-digit number in the range `1901' to `2155'.

   * As a 1- or 2-digit string in the range `'0'' to `'99''. Values in
     the ranges `'0'' to `'69'' and `'70'' to `'99'' are converted to
     `YEAR' values in the ranges `2000' to `2069' and `1970' to `1999'.

   * As a 1- or 2-digit number in the range `1' to `99'. Values in the
     ranges `1' to `69' and `70' to `99' are converted to `YEAR' values
     in the ranges `2001' to `2069' and `1970' to `1999'.

     Inserting a numeric `0' has a different effect for `YEAR(2)' and
     `YEAR(4)'. For `YEAR(2)', the result has a display value of `00'
     and an internal value of `2000'. For `YEAR(4)', the result has a
     display value of `0000' and an internal value of `0000'. To
     specify zero for `YEAR(4)' and have it be interpreted as `2000',
     specify it as a string `'0'' or `'00''.

   * As the result of a function that returns a value that is
     acceptable in a `YEAR' context, such as `NOW()'.

Invalid `YEAR' values are converted to `0000'.

See also *Note two-digit-years::.


File: manual.info,  Node: migrating-to-year4,  Next: timestamp-initialization,  Prev: year,  Up: date-and-time-types

11.3.4 `YEAR(2)' Limitations and Migrating to `YEAR(4)'
-------------------------------------------------------

Although the internal range of values for *Note `YEAR(4)': year. and
*Note `YEAR(2)': year. is the same (`1901' to `2155', and `0000'), the
display width for *Note `YEAR(2)': year. makes that type inherently
ambiguous because displayed values indicate only the last two digits of
the internal values. The result can be a loss of information under
certain circumstances. For this reason, consider avoiding *Note
`YEAR(2)': year.  throughout your applications and using *Note
`YEAR(4)': year. wherever you need a *Note `YEAR': year. data type.
This section describes problems that can occur when using *Note
`YEAR(2)': year. and provides information about migrating existing
*Note `YEAR(2)': year.  columns to *Note `YEAR(4)': year. Note that
migration will become necessary at some point because support for *Note
`YEAR': year. data types with display values other than 4, most notably
*Note `YEAR(2)': year, is reduced as of MySQL 5.6.6 and will be removed
entirely in a future release.

* *Note `YEAR(2)': year. Limitations *

Issues with the *Note `YEAR(2)': year. data type include ambiguity of
displayed values, and possible loss of information when values are
dumped and reloaded or converted to strings.

   * Displayed *Note `YEAR(2)': year. values can be ambiguous. It is
     possible for up to three *Note `YEAR(2)': year. values that have
     different internal values to have the same displayed value, as the
     following example demonstrates:

          mysql> CREATE TABLE t (y2 YEAR(2), y4 YEAR(4));
          Query OK, 0 rows affected (0.01 sec)

          mysql> INSERT INTO t (y2) VALUES(1912),(2012),(2112);
          Query OK, 3 rows affected (0.00 sec)
          Records: 3  Duplicates: 0  Warnings: 0

          mysql> UPDATE t SET y4 = y2;
          Query OK, 3 rows affected (0.00 sec)
          Rows matched: 3  Changed: 3  Warnings: 0

          mysql> SELECT * FROM t;
          +------+------+
          | y2   | y4   |
          +------+------+
          |   12 | 1912 |
          |   12 | 2012 |
          |   12 | 2112 |
          +------+------+
          3 rows in set (0.00 sec)

   * If you use *Note `mysqldump': mysqldump. to dump the table created
     in the preceding item, the dump file represents all `y2' values
     using the same 2-digit representation (`12'). If you reload the
     table from the dump file, all resulting rows have internal value
     `2012' and display value `12', thus losing the distinctions among
     them.

   * Conversion of a *Note `YEAR(2)': year. or *Note `YEAR(4)': year.
     data value to string form uses the display width of the *Note
     `YEAR': year. type. Suppose that *Note `YEAR(2)': year. and *Note
     `YEAR(4)': year. columns both contain the value `1970'. Assigning
     each column to a string results in a value of `'70'' or `'1970'',
     respectively. That is, loss of information occurs for conversion
     from *Note `YEAR(2)': year. to string.

   * Values outside the range from `1970' to `2069' are stored
     incorrectly when inserted into a *Note `YEAR(2)': year. column in a
     *Note `CSV': csv-storage-engine. table. For example, inserting
     `2111' results in a display value of `11' but an internal value of
     `2011'.

To avoid these problems, use *Note `YEAR(4)': year. rather than *Note
`YEAR(2)': year. Suggestions regarding migration strategies appear
later in this section.

* Migrating from *Note `YEAR(2)': year. to *Note `YEAR(4)': year.  *

Should you decide to convert *Note `YEAR(2)': year. columns to *Note
`YEAR(4)': year, use *Note `ALTER TABLE': alter-table. Suppose that a
table `t1' has this definition:

     CREATE TABLE t1 (ycol YEAR(2) NOT NULL DEFAULT '70');

Modify the column using `ALTER TABLE' as follows. Remember to include
any column attributes such as `NOT NULL' or `DEFAULT':

     ALTER TABLE t1 MODIFY ycol YEAR(4) NOT NULL DEFAULT '1970';

The *Note `ALTER TABLE': alter-table. statement converts the table
without changing *Note `YEAR(2)': year. values. If the server is a
replication master, the *Note `ALTER TABLE': alter-table. statement
replicates to slaves and makes the corresponding table change on each
one.

One migration method should be avoided: Do not dump your data with
*Note `mysqldump': mysqldump. and reload the dump file after upgrading.
This has the potential to change *Note `YEAR(2)': year. values, as
described previously.

A migration from *Note `YEAR(2)': year. to *Note `YEAR(4)': year.
should also involve examining application code for the possibility of
changed behavior under conditions such as these:

   * Code that expects selecting a *Note `YEAR': year. column to produce
     exactly two digits.

   * Code that does not account for different handling for inserts of
     numeric `0': Inserting `0' into *Note `YEAR(2)': year. or *Note
     `YEAR(4)': year. results in an internal value of `2000' or `0000',
     respectively.


File: manual.info,  Node: timestamp-initialization,  Next: fractional-seconds,  Prev: migrating-to-year4,  Up: date-and-time-types

11.3.5 Automatic Initialization and Updating for `TIMESTAMP'
------------------------------------------------------------

*Note*:

In older versions of MySQL (prior to 4.1), the properties of the *Note
`TIMESTAMP': datetime. data type differed significantly in several ways
from what is described in this section (see the `MySQL 3.23, 4.0, 4.1
Reference Manual' for details); these include syntax extensions which
are deprecated in MySQL 5.1, and no longer supported in MySQL 5.5. This
has implications for performing a dump and restore or replicating
between MySQL Server versions. If you are using columns that are defined
using the old *Note `TIMESTAMP(N)': datetime.  syntax, see *Note
upgrading-from-previous-series::, prior to upgrading to MySQL 5.5.

The *Note `TIMESTAMP': datetime. data type offers automatic
initialization and updating to the current date and time (that is, the
current timestamp). You can choose whether to use these properties and
which column should have them:

   * One *Note `TIMESTAMP': datetime. column in a table can have the
     current timestamp as the default value for initializing the
     column, as the auto-update value, or both. It is not possible to
     have the current timestamp be the default value for one column and
     the auto-update value for another column.

   * If the column is auto-initialized, it is set to the current
     timestamp for inserted rows that specify no value for the column.

   * If the column is auto-updated, it is automatically updated to the
     current timestamp when the value of any other column in the row is
     changed from its current value. The column remains unchanged if
     all other columns are set to their current values. To prevent the
     column from updating when other columns change, explicitly set it
     to its current value. To update the column even when other columns
     do not change, explicitly set it to the value it should have (for
     example, set it to `CURRENT_TIMESTAMP').

In addition, you can initialize or update any *Note `TIMESTAMP':
datetime. column to the current date and time by assigning it a `NULL'
value, unless it has been defined with the `NULL' attribute to permit
`NULL' values.

To specify automatic properties, use the `DEFAULT CURRENT_TIMESTAMP'
and `ON UPDATE CURRENT_TIMESTAMP' clauses. The order of the clauses
does not matter. If both are present in a column definition, either can
occur first. Any of the synonyms for `CURRENT_TIMESTAMP' have the same
meaning as `CURRENT_TIMESTAMP'.  These are `CURRENT_TIMESTAMP()',
`NOW()', `LOCALTIME', `LOCALTIME()', `LOCALTIMESTAMP', and
`LOCALTIMESTAMP()'.

Use of `DEFAULT CURRENT_TIMESTAMP' and `ON UPDATE CURRENT_TIMESTAMP' is
specific to *Note `TIMESTAMP': datetime. The `DEFAULT' clause also can
be used to specify a constant (nonautomatic) default value; for example,
`DEFAULT 0' or `DEFAULT '2000-01-01 00:00:00''.

*Note*:

The following examples that use `DEFAULT 0' do not work if the
`NO_ZERO_DATE' SQL mode is enabled because that mode causes `zero' date
values (specified, for example, as `0' `'0000-00-00 00:00:00'') to be
rejected. Be aware that the `TRADITIONAL' SQL mode includes
`NO_ZERO_DATE'.

The following rules describe the possibilities for defining the first
*Note `TIMESTAMP': datetime. column in a table with the current
timestamp for both the default and auto-update values, for one but not
the other, or for neither:

   * With both `DEFAULT CURRENT_TIMESTAMP' and `ON UPDATE
     CURRENT_TIMESTAMP', the column has the current timestamp for its
     default value and is automatically updated to the current
     timestamp.

          CREATE TABLE t1 (
            ts TIMESTAMP DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP
          );

   * With neither `DEFAULT CURRENT_TIMESTAMP' nor `ON UPDATE
     CURRENT_TIMESTAMP', it is the same as specifying both `DEFAULT
     CURRENT_TIMESTAMP' and `ON UPDATE CURRENT_TIMESTAMP'.

          CREATE TABLE t1 (
            ts TIMESTAMP
          );

   * With a `DEFAULT' clause but no `ON UPDATE CURRENT_TIMESTAMP'
     clause, the column has the given default value and is not
     automatically updated to the current timestamp.

     The default depends on whether the `DEFAULT' clause specifies
     `CURRENT_TIMESTAMP' or a constant value.  With
     `CURRENT_TIMESTAMP', the default is the current timestamp.

          CREATE TABLE t1 (
            ts TIMESTAMP DEFAULT CURRENT_TIMESTAMP
          );

     With a constant, the default is the given value. In this case, the
     column has no automatic properties at all.

          CREATE TABLE t1 (
            ts TIMESTAMP DEFAULT 0
          );

   * With an `ON UPDATE CURRENT_TIMESTAMP' clause and a constant
     `DEFAULT' clause, the column is automatically updated to the
     current timestamp and has the given constant default value.

          CREATE TABLE t1 (
            ts TIMESTAMP DEFAULT 0 ON UPDATE CURRENT_TIMESTAMP
          );

   * With an `ON UPDATE CURRENT_TIMESTAMP' clause but no `DEFAULT'
     clause, the column is automatically updated to the current
     timestamp. The default is 0 unless the column is defined with the
     `NULL' attribute, in which case the default is `NULL'.

          CREATE TABLE t1 (
            ts TIMESTAMP ON UPDATE CURRENT_TIMESTAMP      -- default 0
          );
          CREATE TABLE t2 (
            ts TIMESTAMP NULL ON UPDATE CURRENT_TIMESTAMP -- default NULL
          );

It need not be the first *Note `TIMESTAMP': datetime. column in a table
that is automatically initialized or updated to the current timestamp.
However, to specify automatic initialization or updating for a different
*Note `TIMESTAMP': datetime. column, you must suppress the automatic
properties for the first one. Then, for the other *Note `TIMESTAMP':
datetime. column, the rules for the `DEFAULT' and `ON UPDATE' clauses
are the same as for the first *Note `TIMESTAMP': datetime. column,
except that if you omit both clauses, no automatic initialization or
updating occurs.

To suppress automatic properties for the first *Note `TIMESTAMP':
datetime. column, do either of the following:

   * Define the column with a `DEFAULT' clause that specifies a
     constant default value.

   * Specify the `NULL' attribute. This also causes the column to
     permit `NULL' values, which means that you cannot assign the
     current timestamp by setting the column to `NULL'. Assigning
     `NULL' sets the column to `NULL'.

Consider these table definitions:

     CREATE TABLE t1 (
       ts1 TIMESTAMP DEFAULT 0,
       ts2 TIMESTAMP DEFAULT CURRENT_TIMESTAMP
                     ON UPDATE CURRENT_TIMESTAMP);
     CREATE TABLE t2 (
       ts1 TIMESTAMP NULL,
       ts2 TIMESTAMP DEFAULT CURRENT_TIMESTAMP
                     ON UPDATE CURRENT_TIMESTAMP);
     CREATE TABLE t3 (
       ts1 TIMESTAMP NULL DEFAULT 0,
       ts2 TIMESTAMP DEFAULT CURRENT_TIMESTAMP
                     ON UPDATE CURRENT_TIMESTAMP);

The tables have these properties:

   * In each table definition, the first *Note `TIMESTAMP': datetime.
     column has no automatic initialization or updating.

   * The tables differ in how the `ts1' column handles `NULL' values.
     For `t1', `ts1' is `NOT NULL' and assigning it a value of `NULL'
     sets it to the current timestamp.  For `t2' and `t3', `ts1'
     permits `NULL' and assigning it a value of `NULL' sets it to
     `NULL'.

   * `t2' and `t3' differ in the default value for `ts1'. For `t2',
     `ts1' is defined to permit `NULL', so the default is also `NULL'
     in the absence of an explicit `DEFAULT' clause. For `t3', `ts1'
     permits `NULL' but has an explicit default of 0.

* *Note `TIMESTAMP': datetime. Initialization and the `NULL' Attribute *

By default, *Note `TIMESTAMP': datetime. columns are `NOT NULL', cannot
contain `NULL' values, and assigning `NULL' assigns the current
timestamp. To permit a *Note `TIMESTAMP': datetime. column to contain
`NULL', explicitly declare it with the `NULL' attribute. In this case,
the default value also becomes `NULL' unless overridden with a
`DEFAULT' clause that specifies a different default value. `DEFAULT
NULL' can be used to explicitly specify `NULL' as the default value.
(For a *Note `TIMESTAMP': datetime.  column not declared with the
`NULL' attribute, `DEFAULT NULL' is invalid.) If a *Note `TIMESTAMP':
datetime. column permits `NULL' values, assigning `NULL' sets it to
`NULL', not to the current timestamp.

The following table contains several *Note `TIMESTAMP': datetime.
columns that permit `NULL' values:

     CREATE TABLE t
     (
       ts1 TIMESTAMP NULL DEFAULT NULL,
       ts2 TIMESTAMP NULL DEFAULT 0,
       ts3 TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP
     );

A *Note `TIMESTAMP': datetime. column that permits `NULL' values does
_not_ take on the current timestamp at insert time except under one of
the following conditions:

   * Its default value is defined as `CURRENT_TIMESTAMP' and no value
     is specified for the column

   * `CURRENT_TIMESTAMP' or any of its synonyms such as `NOW()' is
     explicitly inserted into the column

In other words, a *Note `TIMESTAMP': datetime.  column defined to
permit `NULL' values auto-initializes only if its definition includes
`DEFAULT CURRENT_TIMESTAMP':

     CREATE TABLE t (ts TIMESTAMP NULL DEFAULT CURRENT_TIMESTAMP);

If the *Note `TIMESTAMP': datetime. column permits `NULL' values but
its definition does not include `DEFAULT CURRENT_TIMESTAMP', you must
explicitly insert a value corresponding to the current date and time.
Suppose that tables `t1' and `t2' have these definitions:

     CREATE TABLE t1 (ts TIMESTAMP NULL DEFAULT '0000-00-00 00:00:00');
     CREATE TABLE t2 (ts TIMESTAMP NULL DEFAULT NULL);

To set the *Note `TIMESTAMP': datetime. column in either table to the
current timestamp at insert time, explicitly assign it that value. For
example:

     INSERT INTO t1 VALUES (NOW());
     INSERT INTO t2 VALUES (CURRENT_TIMESTAMP);


File: manual.info,  Node: fractional-seconds,  Next: date-and-time-type-conversion,  Prev: timestamp-initialization,  Up: date-and-time-types

11.3.6 Fractional Seconds in Time Values
----------------------------------------

A trailing fractional seconds part is permissible for temporal values
in contexts such as literal values, and in the arguments to or return
values from some temporal functions. Example:

     mysql> SELECT MICROSECOND('2010-12-10 14:12:09.019473');
     +-------------------------------------------+
     | MICROSECOND('2010-12-10 14:12:09.019473') |
     +-------------------------------------------+
     |                                     19473 |
     +-------------------------------------------+

However, when MySQL stores a value into a column of any temporal data
type, it discards any fractional part and does not store it.


File: manual.info,  Node: date-and-time-type-conversion,  Next: two-digit-years,  Prev: fractional-seconds,  Up: date-and-time-types

11.3.7 Conversion Between Date and Time Types
---------------------------------------------

To some extent, you can convert a value from one temporal type to
another. However, there may be some alteration of the value or loss of
information. In all cases, conversion between temporal types is subject
to the range of valid values for the resulting type. For example,
although *Note `DATE': datetime, *Note `DATETIME': datetime, and *Note
`TIMESTAMP': datetime. values all can be specified using the same set
of formats, the types do not all have the same range of values.  *Note
`TIMESTAMP': datetime. values cannot be earlier than `1970' UTC or
later than `'2038-01-19 03:14:07'' UTC. This means that a date such as
`'1968-01-01'', while valid as a *Note `DATE': datetime. or *Note
`DATETIME': datetime. value, is not valid as a *Note `TIMESTAMP':
datetime. value and is converted to `0'.

Conversion of *Note `DATE': datetime. values:

   * Conversion to a *Note `DATETIME': datetime. or *Note `TIMESTAMP':
     datetime. value adds a time part of `'00:00:00'' because the *Note
     `DATE': datetime. value contains no time information.

   * Conversion to a *Note `TIME': time. value is not useful; the
     result is `'00:00:00''.

Conversion of *Note `DATETIME': datetime. and *Note `TIMESTAMP':
datetime. values:

   * Conversion to a *Note `DATE': datetime. value discards the time
     part because the *Note `DATE': datetime. type contains no time
     information.

   * Conversion to a *Note `TIME': time. value discards the date part
     because the *Note `TIME': time. type contains no date information.

Conversion of *Note `TIME': time. values:

MySQL converts a time value to a date or date-and-time value by parsing
the string value of the time as a date or date-and-time.  This is
unlikely to be useful. For example, `'23:12:31'' interpreted as a date
becomes `'2032-12-31''. Time values not valid as dates become
`'0000-00-00'' or `NULL'.

Explicit conversion can be used to override implicit conversion.  For
example, in comparison of *Note `DATE': datetime. and *Note `DATETIME':
datetime. values, the *Note `DATE': datetime. value is coerced to the
*Note `DATETIME': datetime. type by adding a time part of `'00:00:00''.
To perform the comparison by ignoring the time part of the *Note
`DATETIME': datetime. value instead, use the `CAST()' function in the
following way:

     DATE_COL = CAST(DATETIME_COL AS DATE)

Conversion of *Note `TIME': time. or *Note `DATETIME': datetime. values
to numeric form (for example, by adding `+0') results in a
double-precision value with a microseconds part of `.000000':

     mysql> SELECT CURTIME(), CURTIME()+0;
     +-----------+---------------+
     | CURTIME() | CURTIME()+0   |
     +-----------+---------------+
     | 10:41:36  | 104136.000000 |
     +-----------+---------------+
     mysql> SELECT NOW(), NOW()+0;
     +---------------------+-----------------------+
     | NOW()               | NOW()+0               |
     +---------------------+-----------------------+
     | 2007-11-30 10:41:47 | 20071130104147.000000 |
     +---------------------+-----------------------+


File: manual.info,  Node: two-digit-years,  Prev: date-and-time-type-conversion,  Up: date-and-time-types

11.3.8 Two-Digit Years in Dates
-------------------------------

Date values with two-digit years are ambiguous because the century is
unknown. Such values must be interpreted into four-digit form because
MySQL stores years internally using four digits.

For *Note `DATETIME': datetime, *Note `DATE': datetime, and *Note
`TIMESTAMP': datetime. types, MySQL interprets dates specified with
ambiguous year values using these rules:

   * Year values in the range `00-69' are converted to `2000-2069'.

   * Year values in the range `70-99' are converted to `1970-1999'.

For `YEAR', the rules are the same, with this exception: A numeric `00'
inserted into `YEAR(4)' results in `0000' rather than `2000'. To
specify zero for `YEAR(4)' and have it be interpreted as `2000',
specify it as a string `'0'' or `'00''.

Remember that these rules are only heuristics that provide reasonable
guesses as to what your data values mean. If the rules used by MySQL do
not produce the values you require, you must provide unambiguous input
containing four-digit year values.

`ORDER BY' properly sorts *Note `YEAR': year. values that have two-digit
years.

Some functions like `MIN()' and `MAX()' convert a *Note `YEAR': year.
to a number. This means that a value with a two-digit year does not
work properly with these functions. The fix in this case is to convert
the *Note `YEAR': year. to four-digit year format.


File: manual.info,  Node: string-types,  Next: data-type-defaults,  Prev: date-and-time-types,  Up: data-types

11.4 String Types
=================

* Menu:

* char::                         The `CHAR' and `VARCHAR' Types
* binary-varbinary::             The `BINARY' and `VARBINARY' Types
* blob::                         The `BLOB' and `TEXT' Types
* enum::                         The `ENUM' Type
* set::                          The `SET' Type

The string types are *Note `CHAR': char, *Note `VARCHAR': char, *Note
`BINARY': binary-varbinary, *Note `VARBINARY': binary-varbinary, *Note
`BLOB': blob, *Note `TEXT': blob, *Note `ENUM': enum, and *Note `SET':
set. This section describes how these types work and how to use them in
your queries. For string type storage requirements, see *Note
storage-requirements::.


File: manual.info,  Node: char,  Next: binary-varbinary,  Prev: string-types,  Up: string-types

11.4.1 The `CHAR' and `VARCHAR' Types
-------------------------------------

The `CHAR' and `VARCHAR' types are similar, but differ in the way they
are stored and retrieved. They also differ in maximum length and in
whether trailing spaces are retained.

The `CHAR' and `VARCHAR' types are declared with a length that
indicates the maximum number of characters you want to store. For
example, `CHAR(30)' can hold up to 30 characters.

The length of a `CHAR' column is fixed to the length that you declare
when you create the table. The length can be any value from 0 to 255.
When `CHAR' values are stored, they are right-padded with spaces to the
specified length. When `CHAR' values are retrieved, trailing spaces are
removed unless the `PAD_CHAR_TO_FULL_LENGTH' SQL mode is enabled.

Values in `VARCHAR' columns are variable-length strings. The length can
be specified as a value from 0 to 65,535. The effective maximum length
of a `VARCHAR' is subject to the maximum row size (65,535 bytes, which
is shared among all columns) and the character set used. See *Note
column-count-limit::.

In contrast to `CHAR', `VARCHAR' values are stored as a 1-byte or
2-byte length prefix plus data. The length prefix indicates the number
of bytes in the value. A column uses one length byte if values require
no more than 255 bytes, two length bytes if values may require more
than 255 bytes.

If strict SQL mode is not enabled and you assign a value to a `CHAR' or
`VARCHAR' column that exceeds the column's maximum length, the value is
truncated to fit and a warning is generated. For truncation of nonspace
characters, you can cause an error to occur (rather than a warning) and
suppress insertion of the value by using strict SQL mode. See *Note
server-sql-mode::.

For `VARCHAR' columns, trailing spaces in excess of the column length
are truncated prior to insertion and a warning is generated, regardless
of the SQL mode in use. For `CHAR' columns, truncation of excess
trailing spaces from inserted values is performed silently regardless of
the SQL mode.

`VARCHAR' values are not padded when they are stored. Trailing spaces
are retained when values are stored and retrieved, in conformance with
standard SQL.

The following table illustrates the differences between `CHAR' and
`VARCHAR' by showing the result of storing various string values into
`CHAR(4)' and `VARCHAR(4)' columns (assuming that the column uses a
single-byte character set such as `latin1').

This table illustrates the difference between `CHAR' and `VARCHAR'
storage requirements by showing the required storage for various string
values in `CHAR(4)' and `VARCHAR(4)' columns.

Value       `CHAR(4)'   Storage        `VARCHAR(4)'Storage
                        Required                   Required
`'''        `'    ''    4 bytes        `'''        1 byte
`'ab''      `'ab  ''    4 bytes        `'ab''      3 bytes
`'abcd''    `'abcd''    4 bytes        `'abcd''    5 bytes
`'abcdefgh''`'abcd''    4 bytes        `'abcd''    5 bytes

The values shown as stored in the last row of the table apply _only
when not using strict mode_; if MySQL is running in strict mode, values
that exceed the column length are _not stored_, and an error results.

If a given value is stored into the `CHAR(4)' and `VARCHAR(4)' columns,
the values retrieved from the columns are not always the same because
trailing spaces are removed from `CHAR' columns upon retrieval.  The
following example illustrates this difference:

     mysql> CREATE TABLE vc (v VARCHAR(4), c CHAR(4));
     Query OK, 0 rows affected (0.01 sec)

     mysql> INSERT INTO vc VALUES ('ab  ', 'ab  ');
     Query OK, 1 row affected (0.00 sec)

     mysql> SELECT CONCAT('(', v, ')'), CONCAT('(', c, ')') FROM vc;
     +---------------------+---------------------+
     | CONCAT('(', v, ')') | CONCAT('(', c, ')') |
     +---------------------+---------------------+
     | (ab  )              | (ab)                |
     +---------------------+---------------------+
     1 row in set (0.06 sec)

Values in `CHAR' and `VARCHAR' columns are sorted and compared
according to the character set collation assigned to the column.

All MySQL collations are of type `PADSPACE'.  This means that all
`CHAR', `VARCHAR', and `TEXT' values in MySQL are compared without
regard to any trailing spaces.  `Comparison' in this context does not
include the `LIKE' pattern-matching operator, for which trailing spaces
are significant. For example:

     mysql> CREATE TABLE names (myname CHAR(10));
     Query OK, 0 rows affected (0.03 sec)

     mysql> INSERT INTO names VALUES ('Monty');
     Query OK, 1 row affected (0.00 sec)

     mysql> SELECT myname = 'Monty', myname = 'Monty  ' FROM names;
     +------------------+--------------------+
     | myname = 'Monty' | myname = 'Monty  ' |
     +------------------+--------------------+
     |                1 |                  1 |
     +------------------+--------------------+
     1 row in set (0.00 sec)

     mysql> SELECT myname LIKE 'Monty', myname LIKE 'Monty  ' FROM names;
     +---------------------+-----------------------+
     | myname LIKE 'Monty' | myname LIKE 'Monty  ' |
     +---------------------+-----------------------+
     |                   1 |                     0 |
     +---------------------+-----------------------+
     1 row in set (0.00 sec)

This is true for all MySQL versions, and is not affected by the server
SQL mode.

*Note*:

For more information about MySQL character sets and collations, see
*Note charset::.

For those cases where trailing pad characters are stripped or
comparisons ignore them, if a column has an index that requires unique
values, inserting into the column values that differ only in number of
trailing pad characters will result in a duplicate-key error. For
example, if a table contains `'a'', an attempt to store `'a '' causes a
duplicate-key error.


File: manual.info,  Node: binary-varbinary,  Next: blob,  Prev: char,  Up: string-types

11.4.2 The `BINARY' and `VARBINARY' Types
-----------------------------------------

The `BINARY' and `VARBINARY' types are similar to *Note `CHAR': char.
and *Note `VARCHAR': char, except that they contain binary strings
rather than nonbinary strings. That is, they contain byte strings
rather than character strings. This means that they have no character
set, and sorting and comparison are based on the numeric values of the
bytes in the values.

The permissible maximum length is the same for `BINARY' and `VARBINARY'
as it is for *Note `CHAR': char. and *Note `VARCHAR': char, except that
the length for `BINARY' and `VARBINARY' is a length in bytes rather
than in characters.

The `BINARY' and `VARBINARY' data types are distinct from the `CHAR
BINARY' and `VARCHAR BINARY' data types. For the latter types, the
`BINARY' attribute does not cause the column to be treated as a binary
string column. Instead, it causes the binary collation for the column
character set to be used, and the column itself contains nonbinary
character strings rather than binary byte strings. For example, `CHAR(5)
BINARY' is treated as `CHAR(5) CHARACTER SET latin1 COLLATE
latin1_bin', assuming that the default character set is `latin1'. This
differs from `BINARY(5)', which stores 5-bytes binary strings that have
no character set or collation. For information about differences
between nonbinary string binary collations and binary strings, see
*Note charset-binary-collations::.

If strict SQL mode is not enabled and you assign a value to a `BINARY'
or `VARBINARY' column that exceeds the column's maximum length, the
value is truncated to fit and a warning is generated. For cases of
truncation, you can cause an error to occur (rather than a warning) and
suppress insertion of the value by using strict SQL mode. See *Note
server-sql-mode::.

When `BINARY' values are stored, they are right-padded with the pad
value to the specified length. The pad value is `0x00' (the zero byte).
Values are right-padded with `0x00' on insert, and no trailing bytes
are removed on select. All bytes are significant in comparisons,
including `ORDER BY' and `DISTINCT' operations. `0x00' bytes and spaces
are different in comparisons, with `0x00' < space.

Example: For a `BINARY(3)' column, `'a '' becomes `'a \0'' when
inserted.  `'a\0'' becomes `'a\0\0'' when inserted. Both inserted
values remain unchanged when selected.

For `VARBINARY', there is no padding on insert and no bytes are
stripped on select. All bytes are significant in comparisons, including
`ORDER BY' and `DISTINCT' operations. `0x00' bytes and spaces are
different in comparisons, with `0x00' < space.

For those cases where trailing pad bytes are stripped or comparisons
ignore them, if a column has an index that requires unique values,
inserting into the column values that differ only in number of trailing
pad bytes will result in a duplicate-key error. For example, if a table
contains `'a'', an attempt to store `'a\0'' causes a duplicate-key
error.

You should consider the preceding padding and stripping characteristics
carefully if you plan to use the `BINARY' data type for storing binary
data and you require that the value retrieved be exactly the same as the
value stored. The following example illustrates how `0x00'-padding of
`BINARY' values affects column value comparisons:

     mysql> CREATE TABLE t (c BINARY(3));
     Query OK, 0 rows affected (0.01 sec)

     mysql> INSERT INTO t SET c = 'a';
     Query OK, 1 row affected (0.01 sec)

     mysql> SELECT HEX(c), c = 'a', c = 'a\0\0' from t;
     +--------+---------+-------------+
     | HEX(c) | c = 'a' | c = 'a\0\0' |
     +--------+---------+-------------+
     | 610000 |       0 |           1 |
     +--------+---------+-------------+
     1 row in set (0.09 sec)

If the value retrieved must be the same as the value specified for
storage with no padding, it might be preferable to use `VARBINARY' or
one of the *Note `BLOB': blob. data types instead.


File: manual.info,  Node: blob,  Next: enum,  Prev: binary-varbinary,  Up: string-types

11.4.3 The `BLOB' and `TEXT' Types
----------------------------------

A `BLOB' is a binary large object that can hold a variable amount of
data. The four `BLOB' types are `TINYBLOB', `BLOB', `MEDIUMBLOB', and
`LONGBLOB'.  These differ only in the maximum length of the values they
can hold. The four `TEXT' types are `TINYTEXT', `TEXT', `MEDIUMTEXT',
and `LONGTEXT'.  These correspond to the four `BLOB' types and have the
same maximum lengths and storage requirements. See *Note
storage-requirements::.

`BLOB' values are treated as binary strings (byte strings). They have
no character set, and sorting and comparison are based on the numeric
values of the bytes in column values. `TEXT' values are treated as
nonbinary strings (character strings). They have a character set, and
values are sorted and compared based on the collation of the character
set.

If strict SQL mode is not enabled and you assign a value to a `BLOB' or
`TEXT' column that exceeds the column's maximum length, the value is
truncated to fit and a warning is generated. For truncation of nonspace
characters, you can cause an error to occur (rather than a warning) and
suppress insertion of the value by using strict SQL mode. See *Note
server-sql-mode::.

Truncation of excess trailing spaces from values to be inserted into
*Note `TEXT': blob. columns always generates a warning, regardless of
the SQL mode.

For `TEXT' and `BLOB' columns, there is no padding on insert and no
bytes are stripped on select.

If a `TEXT' column is indexed, index entry comparisons are space-padded
at the end. This means that, if the index requires unique values,
duplicate-key errors will occur for values that differ only in the
number of trailing spaces.  For example, if a table contains `'a'', an
attempt to store `'a '' causes a duplicate-key error. This is not true
for `BLOB' columns.

In most respects, you can regard a `BLOB' column as a *Note
`VARBINARY': binary-varbinary. column that can be as large as you like.
Similarly, you can regard a `TEXT' column as a *Note `VARCHAR': char.
column.  `BLOB' and `TEXT' differ from *Note `VARBINARY':
binary-varbinary. and *Note `VARCHAR': char. in the following ways:

   * For indexes on `BLOB' and `TEXT' columns, you must specify an index
     prefix length. For *Note `CHAR': char. and *Note `VARCHAR': char,
     a prefix length is optional. See *Note column-indexes::.

   * `BLOB' and `TEXT' columns cannot have `DEFAULT' values.

If you use the `BINARY' attribute with a `TEXT' data type, the column
is assigned the binary collation of the column character set.

`LONG' and `LONG VARCHAR' map to the `MEDIUMTEXT' data type. This is a
compatibility feature.

MySQL Connector/ODBC defines `BLOB' values as `LONGVARBINARY' and `TEXT'
values as `LONGVARCHAR'.

Because `BLOB' and `TEXT' values can be extremely long, you might
encounter some constraints in using them:

   * Only the first `max_sort_length' bytes of the column are used when
     sorting. The default value of `max_sort_length' is 1024.  You can
     make more bytes significant in sorting or grouping by increasing
     the value of `max_sort_length' at server startup or runtime. Any
     client can change the value of its session `max_sort_length'
     variable:

          mysql> SET max_sort_length = 2000;
          mysql> SELECT id, comment FROM t
              -> ORDER BY comment;

   * Instances of `BLOB' or `TEXT' columns in the result of a query
     that is processed using a temporary table causes the server to use
     a table on disk rather than in memory because the `MEMORY' storage
     engine does not support those data types (see *Note
     internal-temporary-tables::). Use of disk incurs a performance
     penalty, so include `BLOB' or `TEXT' columns in the query result
     only if they are really needed. For example, avoid using *Note
     `SELECT *': select, which selects all columns.

   * The maximum size of a `BLOB' or `TEXT' object is determined by its
     type, but the largest value you actually can transmit between the
     client and server is determined by the amount of available memory
     and the size of the communications buffers. You can change the
     message buffer size by changing the value of the
     `max_allowed_packet' variable, but you must do so for both the
     server and your client program. For example, both *Note `mysql':
     mysql.  and *Note `mysqldump': mysqldump. enable you to change the
     client-side `max_allowed_packet' value.  See *Note
     server-parameters::, *Note mysql::, and *Note mysqldump::.  You
     may also want to compare the packet sizes and the size of the data
     objects you are storing with the storage requirements, see *Note
     storage-requirements::

Each `BLOB' or `TEXT' value is represented internally by a separately
allocated object. This is in contrast to all other data types, for
which storage is allocated once per column when the table is opened.

In some cases, it may be desirable to store binary data such as media
files in `BLOB' or `TEXT' columns. You may find MySQL's string handling
functions useful for working with such data. See *Note
string-functions::. For security and other reasons, it is usually
preferable to do so using application code rather than giving
application users the `FILE' privilege. You can discuss specifics for
various languages and platforms in the MySQL Forums
(`http://forums.mysql.com/').


File: manual.info,  Node: enum,  Next: set,  Prev: blob,  Up: string-types

11.4.4 The `ENUM' Type
----------------------

An `ENUM' is a string object with a value chosen from a list of
permitted values that are enumerated explicitly in the column
specification at table creation time.  It has these advantages:

   * Compact data storage in situations where a column has a limited
     set of possible values. The strings you specify as input values
     are automatically encoded as numbers. See *Note
     storage-requirements:: for the storage requirements for `ENUM'
     types.

   * Readable queries and output. The numbers are translated back to
     the corresponding strings in query results.

and these potential issues to consider:

   * If you make enumeration values that look like numbers, it is easy
     to mix up the literal values with their internal index numbers, as
     explained in *Note enum-limits::.

   * Using `ENUM' columns in `ORDER BY' clauses requires extra care, as
     explained in *Note enum-sorting::.

* Creating and Using `ENUM' Columns *

An enumeration value must be a quoted string literal. For example, you
can create a table with an `ENUM' column like this:

     CREATE TABLE shirts (
         name VARCHAR(40),
         size ENUM('x-small', 'small', 'medium', 'large', 'x-large')
     );
     INSERT INTO shirts (name, size) VALUES ('dress shirt','large'), ('t-shirt','medium'),
       ('polo shirt','small');
     SELECT name, size FROM shirts WHERE size = 'medium';
     +---------+--------+
     | name    | size   |
     +---------+--------+
     | t-shirt | medium |
     +---------+--------+
     UPDATE shirts SET size = 'small' WHERE size = 'large';
     COMMIT;

Inserting 1 million rows into this table with a value of `'medium''
would require 1 million bytes of storage, as opposed to 6 million bytes
if you stored the actual string `'medium'' in a `VARCHAR' column.

* Index Values for Enumeration Literals *

Each enumeration value has an index:

   * The elements listed in the column specification are assigned index
     numbers, beginning with 1.

   * The index value of the empty string error value is 0. This means
     that you can use the following *Note `SELECT': select. statement
     to find rows into which invalid `ENUM' values were assigned:

          mysql> SELECT * FROM TBL_NAME WHERE ENUM_COL=0;

   * The index of the `NULL' value is `NULL'.

   * The term `index' here refers to a position within the list of
     enumeration values. It has nothing to do with table indexes.

For example, a column specified as `ENUM('Mercury', 'Venus', 'Earth')'
can have any of the values shown here. The index of each value is also
shown.

This table shows possible values for a column specified as
`ENUM('Mercury', 'Venus', 'Earth')'. The table also shows the index of
each value.

Value       Index
`NULL'      `NULL'
`'''        0
`'Mercury'' 1
`'Venus''   2
`'Earth''   3

An *Note `ENUM': enum. column can have a maximum of 65,535 distinct
elements. (The practical limit is less than 3000.) A table can have no
more than 255 unique element list definitions among its *Note `ENUM':
enum. and *Note `SET': set. columns considered as a group. For more
information on these limits, see *Note limits-frm-file::.

If you retrieve an `ENUM' value in a numeric context, the column
value's index is returned. For example, you can retrieve numeric values
from an `ENUM' column like this:

     mysql> SELECT ENUM_COL+0 FROM TBL_NAME;

Functions such as `SUM()' or `AVG()' that expect a numeric argument
cast the argument to a number if necessary. For `ENUM' values, the
index number is used in the calculation.

* Handling of Enumeration Literals *

Trailing spaces are automatically deleted from `ENUM' member values in
the table definition when a table is created.

When retrieved, values stored into an `ENUM' column are displayed using
the lettercase that was used in the column definition. Note that `ENUM'
columns can be assigned a character set and collation. For binary or
case-sensitive collations, lettercase is taken into account when
assigning values to the column.

If you store a number into an `ENUM' column, the number is treated as
the index into the possible values, and the value stored is the
enumeration member with that index.  (However, this does _not_ work with
*Note `LOAD DATA': load-data, which treats all input as strings.) If
the numeric value is quoted, it is still interpreted as an index if
there is no matching string in the list of enumeration values. For
these reasons, it is not advisable to define an `ENUM' column with
enumeration values that look like numbers, because this can easily
become confusing. For example, the following column has enumeration
members with string values of `'0'', `'1'', and `'2'', but numeric
index values of `1', `2', and `3':

     numbers ENUM('0','1','2')

If you store `2', it is interpreted as an index value, and becomes
`'1'' (the value with index 2). If you store `'2'', it matches an
enumeration value, so it is stored as `'2''. If you store `'3'', it
does not match any enumeration value, so it is treated as an index and
becomes `'2'' (the value with index 3).

     mysql> INSERT INTO t (numbers) VALUES(2),('2'),('3');
     mysql> SELECT * FROM t;
     +---------+
     | numbers |
     +---------+
     | 1       |
     | 2       |
     | 2       |
     +---------+

To determine all possible values for an `ENUM' column, use *Note `SHOW
COLUMNS FROM TBL_NAME LIKE 'ENUM_COL'': show-columns. and parse the
`ENUM' definition in the `Type' column of the output.

In the C API, `ENUM' values are returned as strings. For information
about using result set metadata to distinguish them from other strings,
see *Note c-api-data-structures::.

* Empty or `NULL' Enumeration Values *

An enumeration value can also be the empty string (`''') or `NULL'
under certain circumstances:

   * If you insert an invalid value into an `ENUM' (that is, a string
     not present in the list of permitted values), the empty string is
     inserted instead as a special error value. This string can be
     distinguished from a `normal' empty string by the fact that this
     string has the numeric value 0. See *Note enum-indexes:: for
     details about the numeric indexes for the enumeration values.

     If strict SQL mode is enabled, attempts to insert invalid `ENUM'
     values result in an error.

   * If an `ENUM' column is declared to permit `NULL', the `NULL' value
     is a valid value for the column, and the default value is `NULL'.
     If an `ENUM' column is declared `NOT NULL', its default value is
     the first element of the list of permitted values.

* Sorting *

`ENUM' values are sorted based on their index numbers, which depend on
the order in which the enumeration members were listed in the column
specification. For example, `'b'' sorts before `'a'' for `ENUM('b',
'a')'. The empty string sorts before nonempty strings, and `NULL'
values sort before all other enumeration values.

To prevent unexpected results when using the `ORDER BY' clause on an
`ENUM' column, use one of these techniques:

   * Specify the `ENUM' list in alphabetic order.

   * Make sure that the column is sorted lexically rather than by index
     number by coding `ORDER BY CAST(COL AS CHAR)' or `ORDER BY
     CONCAT(COL)'.

* Limitations *

An enumeration value cannot be an expression, even one that evaluates
to a string value.

For example, this *Note `CREATE TABLE': create-table.  statement does
_not_ work because the `CONCAT' function cannot be used to construct an
enumeration value:

     CREATE TABLE sizes (
         size ENUM('small', CONCAT('med','ium'), 'large')
     );

You also cannot employ a user variable as an enumeration value.  This
pair of statements do _not_ work:

     SET @mysize = 'medium';

     CREATE TABLE sizes (
         size ENUM('small', @mysize, 'large')
     );

We strongly recommend that you do _not_ use numbers as enumeration
values, because it does not save on storage over the appropriate *Note
`TINYINT': integer-types. or *Note `SMALLINT': integer-types. type, and
it is easy to mix up the strings and the underlying number values
(which might not be the same) if you quote the `ENUM' values
incorrectly. If you do use a number as an enumeration value, always
enclose it in quotation marks. If the quotation marks are omitted, the
number is regarded as an index. See *Note enum-literals:: to see how
even a quoted number could be mistakenly used as a numeric index value.

Duplicate values in the definition cause a warning, or an error if
strict SQL mode is enabled.


File: manual.info,  Node: set,  Prev: enum,  Up: string-types

11.4.5 The `SET' Type
---------------------

A `SET' is a string object that can have zero or more values, each of
which must be chosen from a list of permitted values specified when the
table is created.  `SET' column values that consist of multiple set
members are specified with members separated by commas (``,''). A
consequence of this is that `SET' member values should not themselves
contain commas.

For example, a column specified as `SET('one', 'two') NOT NULL' can
have any of these values:

     ''
     'one'
     'two'
     'one,two'

A *Note `SET': set. column can have a maximum of 64 distinct members. A
table can have no more than 255 unique element list definitions among
its *Note `ENUM': enum. and *Note `SET': set. columns considered as a
group. For more information on this limit, see *Note limits-frm-file::.

Duplicate values in the definition cause a warning, or an error if
strict SQL mode is enabled.

Trailing spaces are automatically deleted from `SET' member values in
the table definition when a table is created.

When retrieved, values stored in a `SET' column are displayed using the
lettercase that was used in the column definition. Note that `SET'
columns can be assigned a character set and collation. For binary or
case-sensitive collations, lettercase is taken into account when
assigning values to the column.

MySQL stores `SET' values numerically, with the low-order bit of the
stored value corresponding to the first set member. If you retrieve a
`SET' value in a numeric context, the value retrieved has bits set
corresponding to the set members that make up the column value. For
example, you can retrieve numeric values from a `SET' column like this:

     mysql> SELECT SET_COL+0 FROM TBL_NAME;

If a number is stored into a `SET' column, the bits that are set in the
binary representation of the number determine the set members in the
column value. For a column specified as `SET('a','b','c','d')', the
members have the following decimal and binary values.

This table shows decimal and binary values for members of a column
specified as `SET('a','b','c','d')'.

`SET'       Decimal Value  Binary Value
Member                     
`'a''       `1'            `0001'
`'b''       `2'            `0010'
`'c''       `4'            `0100'
`'d''       `8'            `1000'

If you assign a value of `9' to this column, that is `1001' in binary,
so the first and fourth `SET' value members `'a'' and `'d'' are selected
and the resulting value is `'a,d''.

For a value containing more than one `SET' element, it does not matter
what order the elements are listed in when you insert the value. It
also does not matter how many times a given element is listed in the
value. When the value is retrieved later, each element in the value
appears once, with elements listed according to the order in which they
were specified at table creation time. For example, suppose that a
column is specified as `SET('a','b','c','d')':

     mysql> CREATE TABLE myset (col SET('a', 'b', 'c', 'd'));

If you insert the values `'a,d'', `'d,a'', `'a,d,d'', `'a,d,a'', and
`'d,a,d'':

     mysql> INSERT INTO myset (col) VALUES
     -> ('a,d'), ('d,a'), ('a,d,a'), ('a,d,d'), ('d,a,d');
     Query OK, 5 rows affected (0.01 sec)
     Records: 5  Duplicates: 0  Warnings: 0

Then all these values appear as `'a,d'' when retrieved:

     mysql> SELECT col FROM myset;
     +------+
     | col  |
     +------+
     | a,d  |
     | a,d  |
     | a,d  |
     | a,d  |
     | a,d  |
     +------+
     5 rows in set (0.04 sec)

If you set a `SET' column to an unsupported value, the value is ignored
and a warning is issued:

     mysql> INSERT INTO myset (col) VALUES ('a,d,d,s');
     Query OK, 1 row affected, 1 warning (0.03 sec)

     mysql> SHOW WARNINGS;
     +---------+------+------------------------------------------+
     | Level   | Code | Message                                  |
     +---------+------+------------------------------------------+
     | Warning | 1265 | Data truncated for column 'col' at row 1 |
     +---------+------+------------------------------------------+
     1 row in set (0.04 sec)

     mysql> SELECT col FROM myset;
     +------+
     | col  |
     +------+
     | a,d  |
     | a,d  |
     | a,d  |
     | a,d  |
     | a,d  |
     | a,d  |
     +------+
     6 rows in set (0.01 sec)

If strict SQL mode is enabled, attempts to insert invalid `SET' values
result in an error.

`SET' values are sorted numerically.  `NULL' values sort before
non-`NULL' `SET' values.

Functions such as `SUM()' or `AVG()' that expect a numeric argument
cast the argument to a number if necessary. For `SET' values, the cast
operation causes the numeric value to be used.

Normally, you search for `SET' values using the `FIND_IN_SET()'
function or the `LIKE' operator:

     mysql> SELECT * FROM TBL_NAME WHERE FIND_IN_SET('VALUE',SET_COL)>0;
     mysql> SELECT * FROM TBL_NAME WHERE SET_COL LIKE '%VALUE%';

The first statement finds rows where SET_COL contains the VALUE set
member. The second is similar, but not the same: It finds rows where
SET_COL contains VALUE anywhere, even as a substring of another set
member.

The following statements also are permitted:

     mysql> SELECT * FROM TBL_NAME WHERE SET_COL & 1;
     mysql> SELECT * FROM TBL_NAME WHERE SET_COL = 'VAL1,VAL2';

The first of these statements looks for values containing the first set
member. The second looks for an exact match. Be careful with
comparisons of the second type. Comparing set values to `'VAL1,VAL2''
returns different results than comparing values to `'VAL2,VAL1''.  You
should specify the values in the same order they are listed in the
column definition.

To determine all possible values for a `SET' column, use `SHOW COLUMNS
FROM TBL_NAME LIKE SET_COL' and parse the `SET' definition in the `Type'
column of the output.

In the C API, `SET' values are returned as strings. For information
about using result set metadata to distinguish them from other strings,
see *Note c-api-data-structures::.


File: manual.info,  Node: data-type-defaults,  Next: storage-requirements,  Prev: string-types,  Up: data-types

11.5 Data Type Default Values
=============================

The `DEFAULT VALUE' clause in a data type specification indicates a
default value for a column. With one exception, the default value must
be a constant; it cannot be a function or an expression. This means,
for example, that you cannot set the default for a date column to be
the value of a function such as `NOW()' or `CURRENT_DATE'. The
exception is that you can specify `CURRENT_TIMESTAMP' as the default
for a *Note `TIMESTAMP': datetime.  column. See *Note
timestamp-initialization::.

*Note `BLOB': blob. and *Note `TEXT': blob. columns cannot be assigned a
default value.

If a column definition includes no explicit `DEFAULT' value, MySQL
determines the default value as follows:

If the column can take `NULL' as a value, the column is defined with an
explicit `DEFAULT NULL' clause.

If the column cannot take `NULL' as the value, MySQL defines the column
with no explicit `DEFAULT' clause. Exception: If the column is defined
as part of a `PRIMARY KEY' but not explicitly as `NOT NULL', MySQL
creates it as a `NOT NULL' column (because `PRIMARY KEY' columns must
be `NOT NULL'), but also assigns it a `DEFAULT' clause using the
implicit default value. To prevent this, include an explicit `NOT NULL'
in the definition of any `PRIMARY KEY' column.

For data entry into a `NOT NULL' column that has no explicit `DEFAULT'
clause, if an *Note `INSERT': insert. or *Note `REPLACE': replace.
statement includes no value for the column, or an *Note `UPDATE':
update.  statement sets the column to `NULL', MySQL handles the column
according to the SQL mode in effect at the time:

   * If strict SQL mode is enabled, an error occurs for transactional
     tables and the statement is rolled back. For nontransactional
     tables, an error occurs, but if this happens for the second or
     subsequent row of a multiple-row statement, the preceding rows
     will have been inserted.

   * If strict mode is not enabled, MySQL sets the column to the
     implicit default value for the column data type.

Suppose that a table `t' is defined as follows:

     CREATE TABLE t (i INT NOT NULL);

In this case, `i' has no explicit default, so in strict mode each of
the following statements produce an error and no row is inserted. When
not using strict mode, only the third statement produces an error; the
implicit default is inserted for the first two statements, but the
third fails because `DEFAULT(i)' cannot produce a value:

     INSERT INTO t VALUES();
     INSERT INTO t VALUES(DEFAULT);
     INSERT INTO t VALUES(DEFAULT(i));

See *Note server-sql-mode::.

For a given table, you can use the *Note `SHOW CREATE TABLE':
show-create-table. statement to see which columns have an explicit
`DEFAULT' clause.

Implicit defaults are defined as follows:

   * For numeric types, the default is `0', with the exception that for
     integer or floating-point types declared with the `AUTO_INCREMENT'
     attribute, the default is the next value in the sequence.

   * For date and time types other than *Note `TIMESTAMP': datetime,
     the default is the appropriate `zero' value for the type. For the
     first *Note `TIMESTAMP': datetime. column in a table, the default
     value is the current date and time. See *Note
     date-and-time-types::.

   * For string types other than *Note `ENUM': enum, the default value
     is the empty string. For *Note `ENUM': enum, the default is the
     first enumeration value.

`SERIAL DEFAULT VALUE' in the definition of an integer column is an
alias for `NOT NULL AUTO_INCREMENT UNIQUE'.


File: manual.info,  Node: storage-requirements,  Next: choosing-types,  Prev: data-type-defaults,  Up: data-types

11.6 Data Type Storage Requirements
===================================

The storage requirements for data vary, according to the storage engine
being used for the table in question. Different storage engines use
different methods for recording the raw data and different data types.
In addition, some engines may compress the information in a given row,
either on a column or entire row basis, making calculation of the
storage requirements for a given table or column structure.

However, all storage engines must communicate and exchange information
on a given row within a table using the same structure, and this
information is consistent, irrespective of the storage engine used to
write the information to disk.

This sections includes some guideliness and information for the storage
requirements for each data type supported by MySQL, including details
for the internal format and the sizes used by storage engines that used
a fixed size representation for different types. Information is listed
by category or storage engine.

The internal representation of a table has a maximum row size of 65,535
bytes, even if the storage engine is capable of supporting larger rows.
This figure excludes *Note `BLOB': blob. or *Note `TEXT': blob.
columns, which contribute only 9 to 12 bytes toward this size. For
*Note `BLOB': blob. and `TEXT' data, the information is stored
internally in a different area of memory than the row buffer. Different
storage engines handle the allocation and storage of this data in
different ways, according to the method they use for handling the
corresponding types. For more information, see *Note storage-engines::,
and *Note column-count-limit::.

*Important*:

For tables using the *Note `NDBCLUSTER': mysql-cluster.  storage
engine, there is the factor of _4-byte alignment_ to be taken into
account when calculating storage requirements. This means that all
*Note `NDB': mysql-cluster. data storage is done in multiples of 4
bytes. Thus, a column value that would take 15 bytes in a table using a
storage engine other than *Note `NDB': mysql-cluster. requires 16 bytes
in an *Note `NDB': mysql-cluster. table. This requirement applies in
addition to any other considerations that are discussed in this
section. For example, in *Note `NDBCLUSTER': mysql-cluster. tables, the
*Note `TINYINT': integer-types, *Note `SMALLINT': integer-types, *Note
`MEDIUMINT': integer-types, and *Note `INTEGER': integer-types.  (*Note
`INT': integer-types.) column types each require 4 bytes storage per
record due to the alignment factor.

An exception to this rule is the *Note `BIT': bit-type. type, which is
_not_ 4-byte aligned. In MySQL Cluster tables, a `BIT(M)' column takes
M bits of storage space.  However, if a table definition contains 1 or
more *Note `BIT': bit-type. columns (up to 32 *Note `BIT': bit-type.
columns), then *Note `NDBCLUSTER': mysql-cluster. reserves 4 bytes (32
bits) per row for these. If a table definition contains more than 32
*Note `BIT': bit-type. columns (up to 64 such columns), then *Note
`NDBCLUSTER': mysql-cluster.  reserves 8 bytes (that is, 64 bits) per
row.

In addition, while a `NULL' itself does not require any storage space,
*Note `NDBCLUSTER': mysql-cluster. reserves 4 bytes per row if the
table definition contains any columns defined as `NULL', up to 32 `NULL'
columns. (If a MySQL Cluster table is defined with more than 32 `NULL'
columns up to 64 `NULL' columns, then 8 bytes per row is reserved.)

When calculating storage requirements for MySQL Cluster tables, you
must also remember that every table using the *Note `NDBCLUSTER':
mysql-cluster. storage engine requires a primary key; if no primary key
is defined by the user, then a `hidden' primary key will be created by
*Note `NDB': mysql-cluster. This hidden primary key consumes 31-35
bytes per table record.

You may find the `ndb_size.pl' utility to be useful for estimating
*Note `NDB': mysql-cluster. storage requirements. This Perl script
connects to a current MySQL (non-Cluster) database and creates a report
on how much space that database would require if it used the *Note
`NDBCLUSTER': mysql-cluster. storage engine. See *Note
mysql-cluster-programs-ndb-size-pl::, for more information.

* Storage Requirements for Numeric Types *

This table shows storage required for numeric data types.

Data Type                     Storage Required
*Note `TINYINT':              1 byte
integer-types.                
*Note `SMALLINT':             2 bytes
integer-types.                
*Note `MEDIUMINT':            3 bytes
integer-types.                
*Note `INT': integer-types,   4 bytes
*Note `INTEGER':              
integer-types.                
*Note `BIGINT':               8 bytes
integer-types.                
`FLOAT(P)'                    4 bytes if 0 <= P <= 24, 8 bytes if 25 <=
                              P <= 53
*Note `FLOAT':                4 bytes
floating-point-types.         
`DOUBLE [PRECISION]', *Note   8 bytes
`REAL': floating-point-types. 
`DECIMAL(M,D)',               Varies; see following discussion
`NUMERIC(M,D)'                
`BIT(M)'                      approximately (M+7)/8 bytes

Values for *Note `DECIMAL': fixed-point-types. (and *Note `NUMERIC':
fixed-point-types.) columns are represented using a binary format that
packs nine decimal (base 10) digits into four bytes. Storage for the
integer and fractional parts of each value are determined separately.
Each multiple of nine digits requires four bytes, and the `leftover'
digits require some fraction of four bytes. The storage required for
excess digits is given by the following table.

This table shows storage required by excess/leftover digits.

Leftover Digits    Number of Bytes
0                  0
1                  1
2                  1
3                  2
4                  2
5                  3
6                  3
7                  4
8                  4

* Storage Requirements for Date and Time Types *

This table shows storage required for date and time types.

Data Type                     Storage Required
*Note `DATE': datetime.       3 bytes
*Note `TIME': time.           3 bytes
*Note `DATETIME': datetime.   8 bytes
*Note `TIMESTAMP': datetime.  4 bytes
*Note `YEAR': year.           1 byte

For details about internal representation of temporal values, see MySQL
Internals: Important Algorithms and Structures
(http://dev.mysql.com/doc/internals/en/algorithms.html).

* Storage Requirements for String Types *

In the following table, M represents the declared column length in
characters for nonbinary string types and bytes for binary string types.
L represents the actual length in bytes of a given string value.

This table shows storage required for string types.

Data Type                     Storage Required
`CHAR(M)'                     M x W bytes, 0 `<= M <=' 255, where W is
                              the number of bytes required for the
                              maximum-length character in the character
                              set
`BINARY(M)'                   M bytes, 0 `<= M <=' 255
`VARCHAR(M)', `VARBINARY(M)'  L + 1 bytes if column values require 0 -
                              255 bytes, L + 2 bytes if values may
                              require more than 255 bytes
*Note `TINYBLOB': blob,       L + 1 bytes, where L < 2^8
*Note `TINYTEXT': blob.       
*Note `BLOB': blob, *Note     L + 2 bytes, where L < 2^16
`TEXT': blob.                 
*Note `MEDIUMBLOB': blob,     L + 3 bytes, where L < 2^24
*Note `MEDIUMTEXT': blob.     
*Note `LONGBLOB': blob,       L + 4 bytes, where L < 2^32
*Note `LONGTEXT': blob.       
`ENUM('VALUE1','VALUE2',...)' 1 or 2 bytes, depending on the number of
                              enumeration values (65,535 values maximum)
`SET('VALUE1','VALUE2',...)'  1, 2, 3, 4, or 8 bytes, depending on the
                              number of set members (64 members maximum)

Variable-length string types are stored using a length prefix plus
data. The length prefix requires from one to four bytes depending on
the data type, and the value of the prefix is L (the byte length of the
string). For example, storage for a *Note `MEDIUMTEXT': blob.  value
requires L bytes to store the value plus three bytes to store the
length of the value.

To calculate the number of bytes used to store a particular *Note
`CHAR': char, *Note `VARCHAR': char, or *Note `TEXT': blob. column
value, you must take into account the character set used for that
column and whether the value contains multi-byte characters. In
particular, when using the `utf8' (or `utf8mb4') Unicode character set,
you must keep in mind that not all characters use the same number of
bytes and can require up to three (four) bytes per character. For a
breakdown of the storage used for different categories of `utf8' or
`utf8mb4' characters, see *Note charset-unicode::.

*Note `VARCHAR': char, *Note `VARBINARY': binary-varbinary, and the
*Note `BLOB': blob. and *Note `TEXT': blob. types are variable-length
types. For each, the storage requirements depend on these factors:

   * The actual length of the column value

   * The column's maximum possible length

   * The character set used for the column, because some character sets
     contain multi-byte characters

For example, a `VARCHAR(255)' column can hold a string with a maximum
length of 255 characters. Assuming that the column uses the `latin1'
character set (one byte per character), the actual storage required is
the length of the string (L), plus one byte to record the length of the
string. For the string `'abcd'', L is 4 and the storage requirement is
five bytes. If the same column is instead declared to use the `ucs2'
double-byte character set, the storage requirement is 10 bytes: The
length of `'abcd'' is eight bytes and the column requires two bytes to
store lengths because the maximum length is greater than 255 (up to 510
bytes).

The effective maximum number of _bytes_ that can be stored in a *Note
`VARCHAR': char. or *Note `VARBINARY': binary-varbinary. column is
subject to the maximum row size of 65,535 bytes, which is shared among
all columns. For a *Note `VARCHAR': char. column that stores multi-byte
characters, the effective maximum number of _characters_ is less. For
example, `utf8' characters can require up to three bytes per character,
so a *Note `VARCHAR': char. column that uses the `utf8' character set
can be declared to be a maximum of 21,844 characters. See *Note
column-count-limit::.

The *Note `NDBCLUSTER': mysql-cluster. storage engine supports
variable-width columns. This means that a *Note `VARCHAR': char. column
in a MySQL Cluster table requires the same amount of storage as would
any other storage engine, with the exception that such values are 4-byte
aligned. Thus, the string `'abcd'' stored in a `VARCHAR(50)' column
using the `latin1' character set requires 8 bytes (rather than 6 bytes
for the same column value in a `MyISAM' table).

*Note `TEXT': blob. and *Note `BLOB': blob. columns are implemented
differently in the NDB Cluster storage engine, wherein each row in a
*Note `TEXT': blob. column is made up of two separate parts. One of
these is of fixed size (256 bytes), and is actually stored in the
original table. The other consists of any data in excess of 256 bytes,
which is stored in a hidden table.  The rows in this second table are
always 2,000 bytes long. This means that the size of a *Note `TEXT':
blob.  column is 256 if SIZE <= 256 (where SIZE represents the size of
the row); otherwise, the size is 256 + SIZE + (2000 - (SIZE - 256) %
2000).

The size of an *Note `ENUM': enum. object is determined by the number
of different enumeration values. One byte is used for enumerations with
up to 255 possible values. Two bytes are used for enumerations having
between 256 and 65,535 possible values. See *Note enum::.

The size of a *Note `SET': set. object is determined by the number of
different set members. If the set size is N, the object occupies
`(N+7)/8' bytes, rounded up to 1, 2, 3, 4, or 8 bytes. A *Note `SET':
set. can have a maximum of 64 members. See *Note set::.


File: manual.info,  Node: choosing-types,  Next: other-vendor-data-types,  Prev: storage-requirements,  Up: data-types

11.7 Choosing the Right Type for a Column
=========================================

For optimum storage, you should try to use the most precise type in all
cases. For example, if an integer column is used for values in the
range from `1' to `99999', `MEDIUMINT UNSIGNED' is the best type. Of
the types that represent all the required values, this type uses the
least amount of storage.

All basic calculations (`+', `-', `*', and `/') with *Note `DECIMAL':
fixed-point-types.  columns are done with precision of 65 decimal (base
10) digits.  See *Note numeric-type-overview::.

If accuracy is not too important or if speed is the highest priority,
the *Note `DOUBLE': floating-point-types. type may be good enough. For
high precision, you can always convert to a fixed-point type stored in a
*Note `BIGINT': integer-types. This enables you to do all calculations
with 64-bit integers and then convert results back to floating-point
values as necessary.

`PROCEDURE ANALYSE' can be used to obtain suggestions for optimal
column data types. For more information, see *Note procedure-analyse::.


File: manual.info,  Node: other-vendor-data-types,  Prev: choosing-types,  Up: data-types

11.8 Using Data Types from Other Database Engines
=================================================

To facilitate the use of code written for SQL implementations from
other vendors, MySQL maps data types as shown in the following table.
These mappings make it easier to import table definitions from other
database systems into MySQL.

This table provides a mapping of MySQL data types to data types from
other vendors.

Other Vendor Type         MySQL Type
*Note `BOOL':             *Note `TINYINT': integer-types.
integer-types.            
*Note `BOOLEAN':          *Note `TINYINT': integer-types.
integer-types.            
`CHARACTER VARYING(M)'    `VARCHAR(M)'
*Note `FIXED':            *Note `DECIMAL': fixed-point-types.
fixed-point-types.        
*Note `FLOAT4':           *Note `FLOAT': floating-point-types.
floating-point-types.     
*Note `FLOAT8':           *Note `DOUBLE': floating-point-types.
floating-point-types.     
*Note `INT1':             *Note `TINYINT': integer-types.
integer-types.            
*Note `INT2':             *Note `SMALLINT': integer-types.
integer-types.            
*Note `INT3':             *Note `MEDIUMINT': integer-types.
integer-types.            
*Note `INT4':             *Note `INT': integer-types.
integer-types.            
`INT8'                    *Note `BIGINT': integer-types.
`LONG VARBINARY'          *Note `MEDIUMBLOB': blob.
`LONG VARCHAR'            *Note `MEDIUMTEXT': blob.
`LONG'                    *Note `MEDIUMTEXT': blob.
*Note `MIDDLEINT':        *Note `MEDIUMINT': integer-types.
integer-types.            
*Note `NUMERIC':          *Note `DECIMAL': fixed-point-types.
fixed-point-types.        

Data type mapping occurs at table creation time, after which the
original type specifications are discarded. If you create a table with
types used by other vendors and then issue a `DESCRIBE TBL_NAME'
statement, MySQL reports the table structure using the equivalent MySQL
types. For example:

     mysql> CREATE TABLE t (a BOOL, b FLOAT8, c LONG VARCHAR, d NUMERIC);
     Query OK, 0 rows affected (0.00 sec)

     mysql> DESCRIBE t;
     +-------+---------------+------+-----+---------+-------+
     | Field | Type          | Null | Key | Default | Extra |
     +-------+---------------+------+-----+---------+-------+
     | a     | tinyint(1)    | YES  |     | NULL    |       |
     | b     | double        | YES  |     | NULL    |       |
     | c     | mediumtext    | YES  |     | NULL    |       |
     | d     | decimal(10,0) | YES  |     | NULL    |       |
     +-------+---------------+------+-----+---------+-------+
     4 rows in set (0.01 sec)


File: manual.info,  Node: functions,  Next: sql-syntax,  Prev: data-types,  Up: Top

12 Functions and Operators
**************************

* Menu:

* func-op-summary-ref::          Function and Operator Reference
* type-conversion::              Type Conversion in Expression Evaluation
* non-typed-operators::          Operators
* control-flow-functions::       Control Flow Functions
* string-functions::             String Functions
* numeric-functions::            Numeric Functions and Operators
* date-and-time-functions::      Date and Time Functions
* mysql-calendar::               What Calendar Is Used By MySQL?
* fulltext-search::              Full-Text Search Functions
* cast-functions::               Cast Functions and Operators
* xml-functions::                XML Functions
* bit-functions::                Bit Functions
* encryption-functions::         Encryption and Compression Functions
* information-functions::        Information Functions
* miscellaneous-functions::      Miscellaneous Functions
* group-by-functions-and-modifiers::  Functions and Modifiers for Use with `GROUP BY' Clauses
* spatial-extensions::           Spatial Extensions
* precision-math::               Precision Math

Expressions can be used at several points in SQL statements, such as in
the `ORDER BY' or `HAVING' clauses of *Note `SELECT': select.
statements, in the `WHERE' clause of a *Note `SELECT': select, *Note
`DELETE': delete, or *Note `UPDATE': update. statement, or in *Note
`SET': set-statement.  statements. Expressions can be written using
literal values, column values, `NULL', built-in functions, stored
functions, user-defined functions, and operators. This chapter
describes the functions and operators that are permitted for writing
expressions in MySQL. Instructions for writing stored functions and
user-defined functions are given in *Note stored-routines::, and *Note
adding-functions::. See *Note function-resolution::, for the rules
describing how the server interprets references to different kinds of
functions.

An expression that contains `NULL' always produces a `NULL' value
unless otherwise indicated in the documentation for a particular
function or operator.

*Note*:

By default, there must be no whitespace between a function name and the
parenthesis following it. This helps the MySQL parser distinguish
between function calls and references to tables or columns that happen
to have the same name as a function. However, spaces around function
arguments are permitted.

You can tell the MySQL server to accept spaces after function names by
starting it with the `--sql-mode=IGNORE_SPACE' option. (See *Note
server-sql-mode::.) Individual client programs can request this
behavior by using the `CLIENT_IGNORE_SPACE' option for *Note
`mysql_real_connect()': mysql-real-connect. In either case, all
function names become reserved words.

For the sake of brevity, most examples in this chapter display the
output from the *Note `mysql': mysql. program in abbreviated form.
Rather than showing examples in this format:

     mysql> SELECT MOD(29,9);
     +-----------+
     | mod(29,9) |
     +-----------+
     |         2 |
     +-----------+
     1 rows in set (0.00 sec)

This format is used instead:

     mysql> SELECT MOD(29,9);
             -> 2


File: manual.info,  Node: func-op-summary-ref,  Next: type-conversion,  Prev: functions,  Up: functions

12.1 Function and Operator Reference
====================================

*Functions/Operators*

Name                          Description
`ABS()'                       Return the absolute value
`ACOS()'                      Return the arc cosine
`ADDDATE()'                   Add time values (intervals) to a date value
`ADDTIME()'                   Add time
`AES_DECRYPT()'               Decrypt using AES
`AES_ENCRYPT()'               Encrypt using AES
`AND', `&&'                   Logical AND
`ASCII()'                     Return numeric value of left-most character
`ASIN()'                      Return the arc sine
`='                           Assign a value (as part of a  *Note `SET':
                              set-statement. statement, or  as part of
                              the `SET' clause in an  *Note `UPDATE':
                              update. statement)
`:='                          Assign a value
`ATAN2()', `ATAN()'           Return the arc tangent of the two arguments
`ATAN()'                      Return the arc tangent
`AVG()'                       Return the average value of the argument
`BENCHMARK()'                 Repeatedly execute an expression
`BETWEEN ... AND ...'         Check whether a value is within a range of
                              values
`BIN()'                       Return a string containing binary
                              representation of a  number
`BINARY'                      Cast a string to a binary string
`BIT_AND()'                   Return bitwise and
`BIT_COUNT()'                 Return the number of bits that are set
`BIT_LENGTH()'                Return length of argument in bits
`BIT_OR()'                    Return bitwise or
`BIT_XOR()'                   Return bitwise xor
`&'                           Bitwise AND
`~'                           Invert bits
`|'                           Bitwise OR
`^'                           Bitwise XOR
`CASE'                        Case operator
`CAST()'                      Cast a value as a certain type
`CEIL()'                      Return the smallest integer value not less
                              than  the argument
`CEILING()'                   Return the smallest integer value not less
                              than  the argument
`CHAR_LENGTH()'               Return number of characters in argument
`CHAR()'                      Return the character for each integer
                              passed
`CHARACTER_LENGTH()'          A synonym for CHAR_LENGTH()
`CHARSET()'                   Return the character set of the argument
`COALESCE()'                  Return the first non-NULL argument
`COERCIBILITY()'              Return the collation coercibility value of
                              the string  argument
`COLLATION()'                 Return the collation of the string argument
`COMPRESS()'                  Return result as a binary string
`CONCAT_WS()'                 Return concatenate with  separator
`CONCAT()'                    Return concatenated string
`CONNECTION_ID()'             Return the connection ID (thread ID)  for
                              the connection
`CONV()'                      Convert numbers between different number
                              bases
`CONVERT_TZ()'                Convert from one timezone to another
`CONVERT()'                   Cast a value as a certain type
`COS()'                       Return the cosine
`COT()'                       Return the cotangent
`COUNT(DISTINCT)'             Return the count of a number of different
                              values
`COUNT()'                     Return a count of the number of rows
                              returned
`CRC32()'                     Compute a cyclic redundancy check value
`CURDATE()'                   Return the current date
`CURRENT_DATE()',             Synonyms for CURDATE()
`CURRENT_DATE'                
`CURRENT_TIME()',             Synonyms for CURTIME()
`CURRENT_TIME'                
`CURRENT_TIMESTAMP()',        Synonyms for NOW()
`CURRENT_TIMESTAMP'           
`CURRENT_USER()',             The authenticated user name and host name
`CURRENT_USER'                
`CURTIME()'                   Return the current time
`DATABASE()'                  Return the default (current) database name
`DATE_ADD()'                  Add time values (intervals) to a date value
`DATE_FORMAT()'               Format date as specified
`DATE_SUB()'                  Subtract a time value (interval) from a
                              date
`DATE()'                      Extract the date part of a date or
                              datetime expression
`DATEDIFF()'                  Subtract two dates
`DAY()'                       Synonym for DAYOFMONTH()
`DAYNAME()'                   Return the name of the weekday
`DAYOFMONTH()'                Return the day of the month (0-31)
`DAYOFWEEK()'                 Return the weekday index of the argument
`DAYOFYEAR()'                 Return the day of the year (1-366)
`DECODE()'                    Decodes a string encrypted using ENCODE()
`DEFAULT()'                   Return the default value for a table column
`DEGREES()'                   Convert radians to degrees
`DES_DECRYPT()'               Decrypt a string
`DES_ENCRYPT()'               Encrypt a string
`DIV'                         Integer division
`/'                           Division operator
`ELT()'                       Return string at index number
`ENCODE()'                    Encode a string
`ENCRYPT()'                   Encrypt a string
`<=>'                         NULL-safe equal to operator
`='                           Equal operator
`EXP()'                       Raise to the power of
`EXPORT_SET()'                Return a string such that for every bit
                              set in the value  bits, you get an on
                              string and for every unset bit, you get an
                              off string
`EXTRACT()'                   Extract part of a date
`ExtractValue()'              Extracts a value from an XML string using
                              XPath notation
`FIELD()'                     Return the index (position) of the first
                              argument  in the subsequent arguments
`FIND_IN_SET()'               Return the index position of  the first
                              argument within the second argument
`FLOOR()'                     Return the largest integer value not
                              greater than  the argument
`FORMAT()'                    Return a number formatted to specified
                              number of decimal places
`FOUND_ROWS()'                For a SELECT with a LIMIT clause, the
                              number of rows that would be returned were
                              there no LIMIT clause
`FROM_DAYS()'                 Convert a day number to a date
`FROM_UNIXTIME()'             Format UNIX timestamp as a date
`GET_FORMAT()'                Return a date format string
`GET_LOCK()'                  Get a named lock
`>='                          Greater than or equal operator
`>'                           Greater than operator
`GREATEST()'                  Return the largest argument
`GROUP_CONCAT()'              Return a concatenated string
`HEX()'                       Return a hexadecimal representation of a
                              decimal or string value
`HOUR()'                      Extract the hour
`IF()'                        If/else construct
`IFNULL()'                    Null if/else construct
`IN()'                        Check whether a value is within a set of
                              values
`INET_ATON()'                 Return the numeric value of an IP address
`INET_NTOA()'                 Return the IP address from a numeric value
`INSERT()'                    Insert a substring at the specified
                              position up to  the specified number of
                              characters
`INSTR()'                     Return the index of the first occurrence
                              of substring
`INTERVAL()'                  Return the index of the argument  that is
                              less than the first argument
`IS_FREE_LOCK()'              Checks whether the named lock  is free
`IS NOT NULL'                 NOT NULL value test
`IS NOT'                      Test a value against a boolean
`IS NULL'                     NULL value test
`IS_USED_LOCK()'              Checks whether the named lock is in use.
                              Return connection identifier if true.
`IS'                          Test a value against a boolean
`ISNULL()'                    Test whether the argument is NULL
`LAST_DAY'                    Return the last day of the month for the
                              argument
`LAST_INSERT_ID()'            Value of the AUTOINCREMENT column  for the
                              last INSERT
`LCASE()'                     Synonym for LOWER()
`LEAST()'                     Return the smallest argument
`<<'                          Left shift
`LEFT()'                      Return the leftmost number of characters
                              as specified
`LENGTH()'                    Return the length of a string in bytes
`<='                          Less than or equal operator
`<'                           Less than operator
`LIKE'                        Simple pattern matching
`LN()'                        Return the natural logarithm of the
                              argument
`LOAD_FILE()'                 Load the named file
`LOCALTIME()', `LOCALTIME'    Synonym for NOW()
`LOCALTIMESTAMP',             Synonym for NOW()
`LOCALTIMESTAMP()'            
`LOCATE()'                    Return the position of the first
                              occurrence  of substring
`LOG10()'                     Return the base-10 logarithm of the
                              argument
`LOG2()'                      Return the base-2 logarithm of the argument
`LOG()'                       Return the natural logarithm of the first
                              argument
`LOWER()'                     Return the argument in lowercase
`LPAD()'                      Return the string argument, left-padded
                              with the specified string
`LTRIM()'                     Remove leading spaces
`MAKE_SET()'                  Return a set of comma-separated strings
                              that have the corresponding bit in bits set
`MAKEDATE()'                  Create a date from the year and day of year
`MAKETIME'                    MAKETIME()
`MASTER_POS_WAIT()'           Block until the slave has read and
                              applied all updates up to the specified
                              position
`MATCH'                       Perform full-text search
`MAX()'                       Return the maximum value
`MD5()'                       Calculate MD5 checksum
`MICROSECOND()'               Return the microseconds from argument
`MID()'                       Return a substring starting from the
                              specified position
`MIN()'                       Return the minimum value
`-'                           Minus operator
`MINUTE()'                    Return the minute from the argument
`MOD()'                       Return the remainder
`% or MOD'                    Modulo operator
`MONTH()'                     Return the month from the date passed
`MONTHNAME()'                 Return the name of the month
`NAME_CONST()'                Causes the column to have the given name
`NOT BETWEEN ... AND ...'     Check whether a value is not within a
                              range of values
`!=', `<>'                    Not equal operator
`NOT IN()'                    Check whether a value is not within a set
                              of values
`NOT LIKE'                    Negation of simple pattern matching
`NOT REGEXP'                  Negation of REGEXP
`NOT', `!'                    Negates value
`NOW()'                       Return the current date and time
`NULLIF()'                    Return NULL if expr1 = expr2
`OCT()'                       Return a string containing octal
                              representation of a  number
`OCTET_LENGTH()'              A synonym for LENGTH()
`OLD_PASSWORD()'              Return the value of the  pre-4.1
                              implementation of PASSWORD
`||', `OR'                    Logical OR
`ORD()'                       Return character code for leftmost
                              character of the  argument
`PASSWORD()'                  Calculate and return a password string
`PERIOD_ADD()'                Add a period to a year-month
`PERIOD_DIFF()'               Return the number of months between periods
`PI()'                        Return the value of pi
`+'                           Addition operator
`POSITION()'                  A synonym for LOCATE()
`POW()'                       Return the argument raised to the
                              specified power
`POWER()'                     Return the argument raised to the
                              specified power
*Note `PROCEDURE ANALYSE()':  Analyze the results of a query
procedure-analyse.            
`QUARTER()'                   Return the quarter from a date argument
`QUOTE()'                     Escape the argument for use in an SQL
                              statement
`RADIANS()'                   Return argument converted to radians
`RAND()'                      Return a random floating-point value
`REGEXP'                      Pattern matching using regular expressions
`RELEASE_LOCK()'              Releases the named lock
`REPEAT()'                    Repeat a string the specified number of
                              times
`REPLACE()'                   Replace occurrences of a specified string
`REVERSE()'                   Reverse the characters in a string
`>>'                          Right shift
`RIGHT()'                     Return the specified rightmost number of
                              characters
`RLIKE'                       Synonym for REGEXP
`ROUND()'                     Round the argument
`ROW_COUNT()'                 The number of rows  updated
`RPAD()'                      Append string the specified number of times
`RTRIM()'                     Remove trailing spaces
`SCHEMA()'                    A synonym for DATABASE()
`SEC_TO_TIME()'               Converts seconds to 'HH:MM:SS' format
`SECOND()'                    Return the second (0-59)
`SESSION_USER()'              Synonym for USER()
`SHA1()', `SHA()'             Calculate an SHA-1 160-bit checksum
`SHA2()'                      Calculate an SHA-2 checksum
`SIGN()'                      Return the sign of the argument
`SIN()'                       Return the sine of the argument
`SLEEP()'                     Sleep for a number of seconds
`SOUNDEX()'                   Return a soundex string
`SOUNDS LIKE'                 Compare sounds
`SPACE()'                     Return a string of the specified number of
                              spaces
`SQRT()'                      Return the square root of the argument
`STD()'                       Return the population standard deviation
`STDDEV_POP()'                Return the population standard deviation
`STDDEV_SAMP()'               Return the sample standard deviation
`STDDEV()'                    Return the population standard deviation
`STR_TO_DATE()'               Convert a string to a date
`STRCMP()'                    Compare two strings
`SUBDATE()'                   A synonym for DATE_SUB() when invoked with
                              three arguments
`SUBSTR()'                    Return the substring as specified
`SUBSTRING_INDEX()'           Return a substring from a  string before
                              the specified number of occurrences of the
                              delimiter
`SUBSTRING()'                 Return the substring as specified
`SUBTIME()'                   Subtract times
`SUM()'                       Return the sum
`SYSDATE()'                   Return the time at which the function
                              executes
`SYSTEM_USER()'               Synonym for USER()
`TAN()'                       Return the tangent of the argument
`TIME_FORMAT()'               Format as time
`TIME_TO_SEC()'               Return the argument converted to seconds
`TIME()'                      Extract the time portion of the expression
                              passed
`TIMEDIFF()'                  Subtract time
`*'                           Multiplication operator
`TIMESTAMP()'                 With a single argument, this function
                              returns the date or  datetime expression;
                              with two arguments, the sum of the
                              arguments
`TIMESTAMPADD()'              Add an interval to a datetime expression
`TIMESTAMPDIFF()'             Subtract an interval from a datetime
                              expression
`TO_DAYS()'                   Return the date argument converted to days
`TO_SECONDS()'                Return the date or datetime argument
                              converted to seconds since  Year 0
`TRIM()'                      Remove leading and trailing spaces
`TRUNCATE()'                  Truncate to specified number of decimal
                              places
`UCASE()'                     Synonym for UPPER()
`-'                           Change the sign of the argument
`UNCOMPRESS()'                Uncompress a string compressed
`UNCOMPRESSED_LENGTH()'       Return the length of a string before
                              compression
`UNHEX()'                     Return a string containing hex
                              representation of a  number
`UNIX_TIMESTAMP()'            Return a UNIX timestamp
`UpdateXML()'                 Return replaced XML fragment
`UPPER()'                     Convert to uppercase
`USER()'                      The user name and host name provided by
                              the client
`UTC_DATE()'                  Return the current UTC date
`UTC_TIME()'                  Return the current UTC time
`UTC_TIMESTAMP()'             Return the current UTC date and time
`UUID_SHORT()'                Return an integer-valued universal
                              identifier
`UUID()'                      Return a Universal Unique Identifier (UUID)
`VALUES()'                    Defines the values to be used during an
                              INSERT
`VAR_POP()'                   Return the population standard variance
`VAR_SAMP()'                  Return the sample variance
`VARIANCE()'                  Return the population standard variance
`VERSION()'                   Returns a string that indicates the MySQL
                              server version
`WEEK()'                      Return the week number
`WEEKDAY()'                   Return the weekday index
`WEEKOFYEAR()'                Return the calendar week of the date (0-53)
`XOR'                         Logical XOR
`YEAR()'                      Return the year
`YEARWEEK()'                  Return the year and week


File: manual.info,  Node: type-conversion,  Next: non-typed-operators,  Prev: func-op-summary-ref,  Up: functions

12.2 Type Conversion in Expression Evaluation
=============================================

When an operator is used with operands of different types, type
conversion occurs to make the operands compatible. Some conversions
occur implicitly. For example, MySQL automatically converts numbers to
strings as necessary, and vice versa.

     mysql> SELECT 1+'1';
             -> 2
     mysql> SELECT CONCAT(2,' test');
             -> '2 test'

It is also possible to convert a number to a string explicitly using
the `CAST()' function.  Conversion occurs implicitly with the
`CONCAT()' function because it expects string arguments.

     mysql> SELECT 38.8, CAST(38.8 AS CHAR);
             -> 38.8, '38.8'
     mysql> SELECT 38.8, CONCAT(38.8);
             -> 38.8, '38.8'

See later in this section for information about the character set of
implicit number-to-string conversions.

The following rules describe how conversion occurs for comparison
operations:

   * If one or both arguments are `NULL', the result of the comparison
     is `NULL', except for the `NULL'-safe `<=>' equality comparison
     operator. For `NULL <=> NULL', the result is true. No conversion
     is needed.

   * If both arguments in a comparison operation are strings, they are
     compared as strings.

   * If both arguments are integers, they are compared as integers.

   * Hexadecimal values are treated as binary strings if not compared
     to a number.

   * If one of the arguments is a *Note `TIMESTAMP': datetime. or *Note
     `DATETIME': datetime. column and the other argument is a constant,
     the constant is converted to a timestamp before the comparison is
     performed. This is done to be more ODBC-friendly. Note that this
     is not done for the arguments to `IN()'! To be safe, always use
     complete datetime, date, or time strings when doing comparisons.
     For example, to achieve best results when using `BETWEEN' with
     date or time values, use `CAST()' to explicitly convert the values
     to the desired data type.

   * If one of the arguments is a decimal value, comparison depends on
     the other argument. The arguments are compared as decimal values
     if the other argument is a decimal or integer value, or as
     floating-point values if the other argument is a floating-point
     value.

   * In all other cases, the arguments are compared as floating-point
     (real) numbers.

For information about conversion of values from one temporal type to
another, see *Note date-and-time-type-conversion::.

The following examples illustrate conversion of strings to numbers for
comparison operations:

     mysql> SELECT 1 > '6x';
             -> 0
     mysql> SELECT 7 > '6x';
             -> 1
     mysql> SELECT 0 > 'x6';
             -> 0
     mysql> SELECT 0 = 'x6';
             -> 1

For comparisons of a string column with a number, MySQL cannot use an
index on the column to look up the value quickly. If STR_COL is an
indexed string column, the index cannot be used when performing the
lookup in the following statement:

     SELECT * FROM TBL_NAME WHERE STR_COL=1;

The reason for this is that there are many different strings that may
convert to the value `1', such as `'1'', `' 1'', or `'1a''.

Comparisons that use floating-point numbers (or values that are
converted to floating-point numbers) are approximate because such
numbers are inexact. This might lead to results that appear
inconsistent:

     mysql> SELECT '18015376320243458' = 18015376320243458;
             -> 1
     mysql> SELECT '18015376320243459' = 18015376320243459;
             -> 0

Such results can occur because the values are converted to
floating-point numbers, which have only 53 bits of precision and are
subject to rounding:

     mysql> SELECT '18015376320243459'+0.0;
             -> 1.8015376320243e+16

Furthermore, the conversion from string to floating-point and from
integer to floating-point do not necessarily occur the same way.  The
integer may be converted to floating-point by the CPU, whereas the
string is converted digit by digit in an operation that involves
floating-point multiplications.

The results shown will vary on different systems, and can be affected
by factors such as computer architecture or the compiler version or
optimization level. One way to avoid such problems is to use `CAST()'
so that a value will not be converted implicitly to a float-point
number:

     mysql> SELECT CAST('18015376320243459' AS UNSIGNED) = 18015376320243459;
             -> 1

For more information about floating-point comparisons, see *Note
problems-with-float::.

As of MySQL 5.5.3, the server includes `dtoa', a conversion library
that provides the basis for improved conversion between string or *Note
`DECIMAL': fixed-point-types. values and approximate-value (*Note
`FLOAT': floating-point-types./*Note `DOUBLE': floating-point-types.)
numbers:

   * Consistent conversion results across platforms, which eliminates,
     for example, Unix versus Windows conversion differences.

   * Accurate representation of values in cases where results
     previously did not provide sufficient precision, such as for
     values close to IEEE limits.

   * Conversion of numbers to string format with the best possible
     precision. The precision of `dtoa' is always the same or better
     than that of the standard C library functions.

Because the conversions produced by this library differ in some cases
from previous results, the potential exists for incompatibilities in
applications that rely on previous results.  For example, applications
that depend on a specific exact result from previous conversions might
need adjustment to accommodate additional precision.

The `dtoa' library provides conversions with the following properties.
D represents a value with a *Note `DECIMAL': fixed-point-types. or
string representation, and F represents a floating-point number in
native binary (IEEE) format.

   * F -> D conversion is done with the best possible precision,
     returning D as the shortest string that yields F when read back in
     and rounded to the nearest value in native binary format as
     specified by IEEE.

   * D -> F conversion is done such that F is the nearest native binary
     number to the input decimal string D.

These properties imply that F -> D -> F conversions are lossless unless
F is `-inf', `+inf', or `NaN'. The latter values are not supported
because the SQL standard defines them as invalid values for *Note
`FLOAT': floating-point-types. or *Note `DOUBLE': floating-point-types.

For D -> F -> D conversions, a sufficient condition for losslessness is
that D uses 15 or fewer digits of precision, is not a denormal value,
`-inf', `+inf', or `NaN'. In some cases, the conversion is lossless
even if D has more than 15 digits of precision, but this is not always
the case.

As of MySQL 5.5.3, implicit conversion of a numeric or temporal value
to string produces a value that has a character set and collation
determined by the `character_set_connection' and `collation_connection'
system variables. (These variables commonly are set with *Note `SET
NAMES': set-statement. For information about connection character sets,
see *Note charset-connection::.)

This change means that such a conversion results in a character
(nonbinary) string (a *Note `CHAR': char, *Note `VARCHAR': char, or
*Note `LONGTEXT': blob. value), except when the connection character
set is set to `binary'. In that case, the conversion result is a binary
string (a *Note `BINARY': binary-varbinary, *Note `VARBINARY':
binary-varbinary, or *Note `LONGBLOB': blob. value).

Before MySQL 5.5.3, an implicit conversion always produced a binary
string, regardless of the connection character set. Such implicit
conversions to string typically occur for functions that are passed
numeric or temporal values when string values are more usual, and thus
could have effects beyond the type of the converted value. Consider the
expression `CONCAT(1, 'abc')'. The numeric argument `1' was converted
to the binary string `'1'' and the concatenation of that value with the
nonbinary string `'abc'' produced the binary string `'1abc''.

Some functions are unaffected by this change in behavior:

   * `CHAR()' without a `USING' clause still returns `VARBINARY'.

   * Functions that previously returned `utf8' strings still do so.
     Examples include `CHARSET()' and `COLLATION()'.

   * Encryption and compression functions that expect string arguments
     and previously returned binary strings are unaffected if the
     return value can contain non-ASCII characters. Examples include
     `AES_ENCRYPT()' and `COMPRESS()'. If the return value contains
     only ASCII characters, the function now returns a character string
     with the connection character set and collation. Examples include
     `MD5()' and `PASSWORD()'.


File: manual.info,  Node: non-typed-operators,  Next: control-flow-functions,  Prev: type-conversion,  Up: functions

12.3 Operators
==============

* Menu:

* operator-precedence::          Operator Precedence
* comparison-operators::         Comparison Functions and Operators
* logical-operators::            Logical Operators
* assignment-operators::         Assignment Operators

*Operators*

Name                          Description
`AND', `&&'                   Logical AND
`='                           Assign a value (as part of a  *Note `SET':
                              set-statement. statement, or  as part of
                              the `SET' clause in an  *Note `UPDATE':
                              update. statement)
`:='                          Assign a value
`BETWEEN ... AND ...'         Check whether a value is within a range of
                              values
`BINARY'                      Cast a string to a binary string
`&'                           Bitwise AND
`~'                           Invert bits
`|'                           Bitwise OR
`^'                           Bitwise XOR
`CASE'                        Case operator
`DIV'                         Integer division
`/'                           Division operator
`<=>'                         NULL-safe equal to operator
`='                           Equal operator
`>='                          Greater than or equal operator
`>'                           Greater than operator
`IS NOT NULL'                 NOT NULL value test
`IS NOT'                      Test a value against a boolean
`IS NULL'                     NULL value test
`IS'                          Test a value against a boolean
`<<'                          Left shift
`<='                          Less than or equal operator
`<'                           Less than operator
`LIKE'                        Simple pattern matching
`-'                           Minus operator
`% or MOD'                    Modulo operator
`NOT BETWEEN ... AND ...'     Check whether a value is not within a
                              range of values
`!=', `<>'                    Not equal operator
`NOT LIKE'                    Negation of simple pattern matching
`NOT REGEXP'                  Negation of REGEXP
`NOT', `!'                    Negates value
`||', `OR'                    Logical OR
`+'                           Addition operator
`REGEXP'                      Pattern matching using regular expressions
`>>'                          Right shift
`RLIKE'                       Synonym for REGEXP
`SOUNDS LIKE'                 Compare sounds
`*'                           Multiplication operator
`-'                           Change the sign of the argument
`XOR'                         Logical XOR


File: manual.info,  Node: operator-precedence,  Next: comparison-operators,  Prev: non-typed-operators,  Up: non-typed-operators

12.3.1 Operator Precedence
--------------------------

Operator precedences are shown in the following list, from highest
precedence to the lowest. Operators that are shown together on a line
have the same precedence.

     INTERVAL
     BINARY, COLLATE
     !
     - (unary minus), ~ (unary bit inversion)
     ^
     *, /, DIV, %, MOD
     -, +
     <<, >>
     &
     |
     = (comparison), <=>, >=, >, <=, <, <>, !=, IS, LIKE, REGEXP, IN
     BETWEEN, CASE, WHEN, THEN, ELSE
     NOT
     &&, AND
     XOR
     ||, OR
     = (assignment), :=

The precedence of `=' depends on whether it is used as a comparison
operator (`=') or as an assignment operator (`='). When used as a
comparison operator, it has the same precedence as `<=>', `>=', `>',
`<=', `<', `<>', `!=', `IS', `LIKE', `REGEXP', and `IN'. When used as
an assignment operator, it has the same precedence as `:='.  *Note
set-statement::, and *Note user-variables::, explain how MySQL
determines which interpretation of `=' should apply.

The meaning of some operators depends on the SQL mode:

   * By default, `||' is a logical `OR' operator. With
     `PIPES_AS_CONCAT' enabled, `||' is string concatenation, with a
     precedence between `^' and the unary operators.

   * By default, `!' has a higher precedence than `NOT'. With
     `HIGH_NOT_PRECEDENCE' enabled, `!' and `NOT' have the same
     precedence.

See *Note server-sql-mode::.

The precedence of operators determines the order of evaluation of terms
in an expression. To override this order and group terms explicitly,
use parentheses. For example:

     mysql> SELECT 1+2*3;
             -> 7
     mysql> SELECT (1+2)*3;
             -> 9


File: manual.info,  Node: comparison-operators,  Next: logical-operators,  Prev: operator-precedence,  Up: non-typed-operators

12.3.2 Comparison Functions and Operators
-----------------------------------------

*Comparison Operators*

Name                          Description
`BETWEEN ... AND ...'         Check whether a value is within a range of
                              values
`COALESCE()'                  Return the first non-NULL argument
`<=>'                         NULL-safe equal to operator
`='                           Equal operator
`>='                          Greater than or equal operator
`>'                           Greater than operator
`GREATEST()'                  Return the largest argument
`IN()'                        Check whether a value is within a set of
                              values
`INTERVAL()'                  Return the index of the argument  that is
                              less than the first argument
`IS NOT NULL'                 NOT NULL value test
`IS NOT'                      Test a value against a boolean
`IS NULL'                     NULL value test
`IS'                          Test a value against a boolean
`ISNULL()'                    Test whether the argument is NULL
`LEAST()'                     Return the smallest argument
`<='                          Less than or equal operator
`<'                           Less than operator
`LIKE'                        Simple pattern matching
`NOT BETWEEN ... AND ...'     Check whether a value is not within a
                              range of values
`!=', `<>'                    Not equal operator
`NOT IN()'                    Check whether a value is not within a set
                              of values
`NOT LIKE'                    Negation of simple pattern matching
`STRCMP()'                    Compare two strings

Comparison operations result in a value of `1' (`TRUE'), `0' (`FALSE'),
or `NULL'. These operations work for both numbers and strings. Strings
are automatically converted to numbers and numbers to strings as
necessary.

The following relational comparison operators can be used to compare
not only scalar operands, but row operands:

     =  >  <  >=  <=  <>  !=

For examples of row comparisons, see *Note row-subqueries::.

Some of the functions in this section return values other than `1'
(`TRUE'), `0' (`FALSE'), or `NULL'. For example, `LEAST()' and
`GREATEST()'. However, the value they return is based on comparison
operations performed according to the rules described in *Note
type-conversion::.

To convert a value to a specific type for comparison purposes, you can
use the `CAST()' function.  String values can be converted to a
different character set using `CONVERT()'. See *Note cast-functions::.

By default, string comparisons are not case sensitive and use the
current character set. The default is `latin1' (cp1252 West European),
which also works well for English.

   *  `='

     Equal:

          mysql> SELECT 1 = 0;
                  -> 0
          mysql> SELECT '0' = 0;
                  -> 1
          mysql> SELECT '0.0' = 0;
                  -> 1
          mysql> SELECT '0.01' = 0;
                  -> 0
          mysql> SELECT '.01' = 0.01;
                  -> 1

   *  `<=>'

     `NULL'-safe equal. This operator performs an equality comparison
     like the `=' operator, but returns `1' rather than `NULL' if both
     operands are `NULL', and `0' rather than `NULL' if one operand is
     `NULL'.

          mysql> SELECT 1 <=> 1, NULL <=> NULL, 1 <=> NULL;
                  -> 1, 1, 0
          mysql> SELECT 1 = 1, NULL = NULL, 1 = NULL;
                  -> 1, NULL, NULL

   *  `<>', `!='

     Not equal:

          mysql> SELECT '.01' <> '0.01';
                  -> 1
          mysql> SELECT .01 <> '0.01';
                  -> 0
          mysql> SELECT 'zapp' <> 'zappp';
                  -> 1

   *  `<='

     Less than or equal:

          mysql> SELECT 0.1 <= 2;
                  -> 1

   *  `<'

     Less than:

          mysql> SELECT 2 < 2;
                  -> 0

   *  `>='

     Greater than or equal:

          mysql> SELECT 2 >= 2;
                  -> 1

   *  `>'

     Greater than:

          mysql> SELECT 2 > 2;
                  -> 0

   *  `IS BOOLEAN_VALUE'

     Tests a value against a boolean value, where BOOLEAN_VALUE can be
     `TRUE', `FALSE', or `UNKNOWN'.

          mysql> SELECT 1 IS TRUE, 0 IS FALSE, NULL IS UNKNOWN;
                  -> 1, 1, 1

   *  `IS NOT BOOLEAN_VALUE'

     Tests a value against a boolean value, where BOOLEAN_VALUE can be
     `TRUE', `FALSE', or `UNKNOWN'.

          mysql> SELECT 1 IS NOT UNKNOWN, 0 IS NOT UNKNOWN, NULL IS NOT UNKNOWN;
                  -> 1, 1, 0

   *  `IS NULL'

     Tests whether a value is `NULL'.

          mysql> SELECT 1 IS NULL, 0 IS NULL, NULL IS NULL;
                  -> 0, 0, 1

     To work well with ODBC programs, MySQL supports the following
     extra features when using `IS NULL':

        * If `sql_auto_is_null' variable is set to 1, then after a
          statement that successfully inserts an automatically generated
          `AUTO_INCREMENT' value, you can find that value by issuing a
          statement of the following form:

               SELECT * FROM TBL_NAME WHERE AUTO_COL IS NULL

          If the statement returns a row, the value returned is the
          same as if you invoked the `LAST_INSERT_ID()' function. For
          details, including the return value after a multiple-row
          insert, see *Note information-functions::. If no
          `AUTO_INCREMENT' value was successfully inserted, the *Note
          `SELECT': select.  statement returns no row.

          The behavior of retrieving an `AUTO_INCREMENT' value by using
          an `IS NULL' comparison can be disabled by setting
          `sql_auto_is_null = 0'.  See *Note server-system-variables::.

          The default value of `sql_auto_is_null' is 0 as of MySQL
          5.5.3, and 1 for earlier versions.

        * For *Note `DATE': datetime. and *Note `DATETIME': datetime.
          columns that are declared as `NOT NULL', you can find the
          special date `'0000-00-00'' by using a statement like this:

               SELECT * FROM TBL_NAME WHERE DATE_COLUMN IS NULL

          This is needed to get some ODBC applications to work because
          ODBC does not support a `'0000-00-00'' date value.

          See *Note
          connector-odbc-usagenotes-functionality-last-insert-id::, and
          the description for the `FLAG_AUTO_IS_NULL' option at *Note
          connector-odbc-configuration-connection-parameters::.

   *  `IS NOT NULL'

     Tests whether a value is not `NULL'.

          mysql> SELECT 1 IS NOT NULL, 0 IS NOT NULL, NULL IS NOT NULL;
                  -> 1, 1, 0

   *  `EXPR BETWEEN MIN AND MAX'

     If EXPR is greater than or equal to MIN and EXPR is less than or
     equal to MAX, `BETWEEN' returns `1', otherwise it returns `0'.
     This is equivalent to the expression `(MIN <= EXPR AND EXPR <=
     MAX)' if all the arguments are of the same type. Otherwise type
     conversion takes place according to the rules described in *Note
     type-conversion::, but applied to all the three arguments.

          mysql> SELECT 2 BETWEEN 1 AND 3, 2 BETWEEN 3 and 1;
                  -> 1, 0
          mysql> SELECT 1 BETWEEN 2 AND 3;
                  -> 0
          mysql> SELECT 'b' BETWEEN 'a' AND 'c';
                  -> 1
          mysql> SELECT 2 BETWEEN 2 AND '3';
                  -> 1
          mysql> SELECT 2 BETWEEN 2 AND 'x-3';
                  -> 0

     For best results when using `BETWEEN' with date or time values,
     use `CAST()' to explicitly convert the values to the desired data
     type.  Examples: If you compare a *Note `DATETIME': datetime. to
     two *Note `DATE': datetime. values, convert the *Note `DATE':
     datetime. values to *Note `DATETIME': datetime. values. If you use
     a string constant such as `'2001-1-1'' in a comparison to a *Note
     `DATE': datetime, cast the string to a *Note `DATE': datetime.

   *  `EXPR NOT BETWEEN MIN AND MAX'

     This is the same as `NOT (EXPR BETWEEN MIN AND MAX)'.

   *  `COALESCE(VALUE,...)'

     Returns the first non-`NULL' value in the list, or `NULL' if there
     are no non-`NULL' values.

          mysql> SELECT COALESCE(NULL,1);
                  -> 1
          mysql> SELECT COALESCE(NULL,NULL,NULL);
                  -> NULL

   *  `GREATEST(VALUE1,VALUE2,...)'

     With two or more arguments, returns the largest (maximum-valued)
     argument. The arguments are compared using the same rules as for
     `LEAST()'.

          mysql> SELECT GREATEST(2,0);
                  -> 2
          mysql> SELECT GREATEST(34.0,3.0,5.0,767.0);
                  -> 767.0
          mysql> SELECT GREATEST('B','A','C');
                  -> 'C'

     `GREATEST()' returns `NULL' if any argument is `NULL'.

   *  `EXPR IN (VALUE,...)'

     Returns `1' if EXPR is equal to any of the values in the `IN'
     list, else returns `0'. If all values are constants, they are
     evaluated according to the type of EXPR and sorted. The search for
     the item then is done using a binary search. This means `IN' is
     very quick if the `IN' value list consists entirely of constants.
     Otherwise, type conversion takes place according to the rules
     described in *Note type-conversion::, but applied to all the
     arguments.

          mysql> SELECT 2 IN (0,3,5,7);
                  -> 0
          mysql> SELECT 'wefwf' IN ('wee','wefwf','weg');
                  -> 1

     You should never mix quoted and unquoted values in an `IN' list
     because the comparison rules for quoted values (such as strings)
     and unquoted values (such as numbers) differ. Mixing types may
     therefore lead to inconsistent results. For example, do not write
     an `IN' expression like this:

          SELECT val1 FROM tbl1 WHERE val1 IN (1,2,'a');

     Instead, write it like this:

          SELECT val1 FROM tbl1 WHERE val1 IN ('1','2','a');

     The number of values in the `IN' list is only limited by the
     `max_allowed_packet' value.

     To comply with the SQL standard, `IN' returns `NULL' not only if
     the expression on the left hand side is `NULL', but also if no
     match is found in the list and one of the expressions in the list
     is `NULL'.

     `IN()' syntax can also be used to write certain types of
     subqueries. See *Note any-in-some-subqueries::.

   *  `EXPR NOT IN (VALUE,...)'

     This is the same as `NOT (EXPR IN (VALUE,...))'.

   *  `ISNULL(EXPR)'

     If EXPR is `NULL', `ISNULL()' returns `1', otherwise it returns
     `0'.

          mysql> SELECT ISNULL(1+1);
                  -> 0
          mysql> SELECT ISNULL(1/0);
                  -> 1

     `ISNULL()' can be used instead of `=' to test whether a value is
     `NULL'. (Comparing a value to `NULL' using `=' always yields
     false.)

     The `ISNULL()' function shares some special behaviors with the `IS
     NULL' comparison operator. See the description of `IS NULL'.

   *  `INTERVAL(N,N1,N2,N3,...)'

     Returns `0' if N < N1, `1' if N < N2 and so on or `-1' if N is
     `NULL'. All arguments are treated as integers. It is required that
     N1 < N2 < N3 < `...' < NN for this function to work correctly.
     This is because a binary search is used (very fast).

          mysql> SELECT INTERVAL(23, 1, 15, 17, 30, 44, 200);
                  -> 3
          mysql> SELECT INTERVAL(10, 1, 10, 100, 1000);
                  -> 2
          mysql> SELECT INTERVAL(22, 23, 30, 44, 200);
                  -> 0

   *  `LEAST(VALUE1,VALUE2,...)'

     With two or more arguments, returns the smallest (minimum-valued)
     argument. The arguments are compared using the following rules:

        * If any argument is `NULL', the result is `NULL'. No
          comparison is needed.

        * If the return value is used in an *Note `INTEGER':
          integer-types. context or all arguments are integer-valued,
          they are compared as integers.

        * If the return value is used in a *Note `REAL':
          floating-point-types. context or all arguments are
          real-valued, they are compared as reals.

        * If the arguments comprise a mix of numbers and strings, they
          are compared as numbers.

        * If any argument is a nonbinary (character) string, the
          arguments are compared as nonbinary strings.

        * In all other cases, the arguments are compared as binary
          strings.

          mysql> SELECT LEAST(2,0);
                  -> 0
          mysql> SELECT LEAST(34.0,3.0,5.0,767.0);
                  -> 3.0
          mysql> SELECT LEAST('B','A','C');
                  -> 'A'

     Note that the preceding conversion rules can produce strange
     results in some borderline cases:

          mysql> SELECT CAST(LEAST(3600, 9223372036854775808.0) as SIGNED);
                  -> -9223372036854775808

     This happens because MySQL reads `9223372036854775808.0' in an
     integer context. The integer representation is not good enough to
     hold the value, so it wraps to a signed integer.


File: manual.info,  Node: logical-operators,  Next: assignment-operators,  Prev: comparison-operators,  Up: non-typed-operators

12.3.3 Logical Operators
------------------------

*Logical Operators*

Name                          Description
`AND', `&&'                   Logical AND
`NOT', `!'                    Negates value
`||', `OR'                    Logical OR
`XOR'                         Logical XOR

In SQL, all logical operators evaluate to `TRUE', `FALSE', or `NULL'
(`UNKNOWN'). In MySQL, these are implemented as 1 (`TRUE'), 0
(`FALSE'), and `NULL'. Most of this is common to different SQL database
servers, although some servers may return any nonzero value for `TRUE'.

MySQL evaluates any nonzero, non-`NULL' value to `TRUE'. For example,
the following statements all assess to `TRUE':

     mysql> SELECT 10 IS TRUE;
     -> 1
     mysql> SELECT -10 IS TRUE;
     -> 1
     mysql> SELECT 'string' IS NOT NULL;
     -> 1

   *  `NOT', `!'

     Logical NOT. Evaluates to `1' if the operand is `0', to `0' if the
     operand is nonzero, and `NOT NULL' returns `NULL'.

          mysql> SELECT NOT 10;
                  -> 0
          mysql> SELECT NOT 0;
                  -> 1
          mysql> SELECT NOT NULL;
                  -> NULL
          mysql> SELECT ! (1+1);
                  -> 0
          mysql> SELECT ! 1+1;
                  -> 1

     The last example produces `1' because the expression evaluates the
     same way as `(!1)+1'.

   *  `AND', `&&'

     Logical AND. Evaluates to `1' if all operands are nonzero and not
     `NULL', to `0' if one or more operands are `0', otherwise `NULL' is
     returned.

          mysql> SELECT 1 && 1;
                  -> 1
          mysql> SELECT 1 && 0;
                  -> 0
          mysql> SELECT 1 && NULL;
                  -> NULL
          mysql> SELECT 0 && NULL;
                  -> 0
          mysql> SELECT NULL && 0;
                  -> 0

   *  `OR', `||'

     Logical OR. When both operands are non-`NULL', the result is `1'
     if any operand is nonzero, and `0' otherwise. With a `NULL'
     operand, the result is `1' if the other operand is nonzero, and
     `NULL' otherwise. If both operands are `NULL', the result is
     `NULL'.

          mysql> SELECT 1 || 1;
                  -> 1
          mysql> SELECT 1 || 0;
                  -> 1
          mysql> SELECT 0 || 0;
                  -> 0
          mysql> SELECT 0 || NULL;
                  -> NULL
          mysql> SELECT 1 || NULL;
                  -> 1

   *  `XOR'

     Logical XOR. Returns `NULL' if either operand is `NULL'. For
     non-`NULL' operands, evaluates to `1' if an odd number of operands
     is nonzero, otherwise `0' is returned.

          mysql> SELECT 1 XOR 1;
                  -> 0
          mysql> SELECT 1 XOR 0;
                  -> 1
          mysql> SELECT 1 XOR NULL;
                  -> NULL
          mysql> SELECT 1 XOR 1 XOR 1;
                  -> 1

     `a XOR b' is mathematically equal to `(a AND (NOT b)) OR ((NOT a)
     and b)'.


File: manual.info,  Node: assignment-operators,  Prev: logical-operators,  Up: non-typed-operators

12.3.4 Assignment Operators
---------------------------

*Assignment Operators*

Name                          Description
`='                           Assign a value (as part of a  *Note `SET':
                              set-statement. statement, or  as part of
                              the `SET' clause in an  *Note `UPDATE':
                              update. statement)
`:='                          Assign a value

   *  `:='

     Assignment operator. Causes the user variable on the left hand
     side of the operator to take on the value to its right.  The value
     on the right hand side may be a literal value, another variable
     storing a value, or any legal expression that yields a scalar
     value, including the result of a query (provided that this value
     is a scalar value). You can perform multiple assignments in the
     same *Note `SET': set-statement.  statement. You can perform
     multiple assignments in the same statement-

     Unlike `=', the `:=' operator is never interpreted as a comparison
     operator. This means you can use `:=' in any valid SQL statement
     (not just in *Note `SET': set-statement.  statements) to assign a
     value to a variable.

          mysql> SELECT @var1, @var2;
                  -> NULL, NULL
          mysql> SELECT @var1 := 1, @var2;
                  -> 1, NULL
          mysql> SELECT @var1, @var2;
                  -> 1, NULL
          mysql> SELECT @var1, @var2 := @var1;
                  -> 1, 1
          mysql> SELECT @var1, @var2;
                  -> 1, 1

          mysql> SELECT @var1:=COUNT(*) FROM t1;
                  -> 4
          mysql> SELECT @var1;
                  -> 4

     You can make value assignments using `:=' in other statements
     besides *Note `SELECT': select, such as *Note `UPDATE': update, as
     shown here:

          mysql> SELECT @var1;
                  -> 4
          mysql> SELECT * FROM t1;
                  -> 1, 3, 5, 7

          mysql> UPDATE t1 SET c1 = 2 WHERE c1 = @var1:= 1;
          Query OK, 1 row affected (0.00 sec)
          Rows matched: 1  Changed: 1  Warnings: 0

          mysql> SELECT @var1;
                  -> 1
          mysql> SELECT * FROM t1;
                  -> 2, 3, 5, 7

     While it is also possible both to set and to read the value of the
     same variable in a single SQL statement using the `:=' operator,
     this is not recommended.  *Note user-variables::, explains why you
     should avoid doing this.

   *  `='

     This operator is used to perform value assignments in two cases,
     described in the next two paragraphs.

     Within a *Note `SET': set-statement.  statement, `=' is treated as
     an assignment operator that causes the user variable on the left
     hand side of the operator to take on the value to its right. (In
     other words, when used in a *Note `SET': set-statement.
     statement, `=' is treated identically to `:='.)  The value on the
     right hand side may be a literal value, another variable storing a
     value, or any legal expression that yields a scalar value,
     including the result of a query (provided that this value is a
     scalar value). You can perform multiple assignments in the same
     *Note `SET': set-statement.  statement.

     In the `SET' clause of an *Note `UPDATE': update. statement, `='
     also acts as an assignment operator; in this case, however, it
     causes the column named on the left hand side of the operator to
     assume the value given to the right, provided any `WHERE'
     conditions that are part of the *Note `UPDATE': update. are met.
     You can make multiple assignments in the same `SET' clause of an
     *Note `UPDATE': update. statement.

     In any other context, `=' is treated as a comparison operator.

          mysql> SELECT @var1, @var2;
                  -> NULL, NULL
          mysql> SELECT @var1 := 1, @var2;
                  -> 1, NULL
          mysql> SELECT @var1, @var2;
                  -> 1, NULL
          mysql> SELECT @var1, @var2 := @var1;
                  -> 1, 1
          mysql> SELECT @var1, @var2;
                  -> 1, 1

     For more information, see *Note set-statement::, *Note update::,
     and *Note subqueries::.


File: manual.info,  Node: control-flow-functions,  Next: string-functions,  Prev: non-typed-operators,  Up: functions

12.4 Control Flow Functions
===========================

*Flow Control Operators*

Name                          Description
`CASE'                        Case operator
`IF()'                        If/else construct
`IFNULL()'                    Null if/else construct
`NULLIF()'                    Return NULL if expr1 = expr2

   *  `CASE VALUE WHEN [COMPARE_VALUE] THEN RESULT [WHEN
     [COMPARE_VALUE] THEN RESULT ...] [ELSE RESULT] END'

     `CASE WHEN [CONDITION] THEN RESULT [WHEN [CONDITION] THEN RESULT
     ...] [ELSE RESULT] END'

     The first version returns the RESULT where `VALUE=COMPARE_VALUE'.
     The second version returns the result for the first condition that
     is true. If there was no matching result value, the result after
     `ELSE' is returned, or `NULL' if there is no `ELSE' part.

          mysql> SELECT CASE 1 WHEN 1 THEN 'one'
              ->     WHEN 2 THEN 'two' ELSE 'more' END;
                  -> 'one'
          mysql> SELECT CASE WHEN 1>0 THEN 'true' ELSE 'false' END;
                  -> 'true'
          mysql> SELECT CASE BINARY 'B'
              ->     WHEN 'a' THEN 1 WHEN 'b' THEN 2 END;
                  -> NULL

     The return type of a `CASE' expression is the compatible
     aggregated type of all return values, but also depends on the
     context in which it is used.  If used in a string context, the
     result is returned as a string. If used in a numeric context, the
     result is returned as a decimal, real, or integer value.

     *Note*:

     The syntax of the `CASE' _expression_ shown here differs slightly
     from that of the SQL *Note `CASE': case.  _statement_ described in
     *Note case::, for use inside stored programs. The *Note `CASE':
     case. statement cannot have an `ELSE NULL' clause, and it is
     terminated with `END CASE' instead of `END'.

   *  `IF(EXPR1,EXPR2,EXPR3)'

     If EXPR1 is `TRUE' (`EXPR1 <> 0' and `EXPR1 <> NULL') then `IF()'
     returns EXPR2; otherwise it returns EXPR3.  `IF()' returns a
     numeric or string value, depending on the context in which it is
     used.

          mysql> SELECT IF(1>2,2,3);
                  -> 3
          mysql> SELECT IF(1<2,'yes','no');
                  -> 'yes'
          mysql> SELECT IF(STRCMP('test','test1'),'no','yes');
                  -> 'no'

     If only one of EXPR2 or EXPR3 is explicitly `NULL', the result
     type of the `IF()' function is the type of the non-`NULL'
     expression.

     The default return type of `IF()' (which may matter when it is
     stored into a temporary table) is calculated as follows.

     This table lists expressions and corresponding return values which
     show how the default return type of `IF()' is calculated.

     Expression                         Return Value
     EXPR2 or EXPR3 returns a string    string
     EXPR2 or EXPR3 returns a           floating-point
     floating-point value               
     EXPR2 or EXPR3 returns an integer  integer

     If EXPR2 and EXPR3 are both strings, the result is case sensitive
     if either string is case sensitive.

     *Note*:

     There is also an *Note `IF': if.  _statement_, which differs from
     the `IF()' _function_ described here. See *Note if::.

   *  `IFNULL(EXPR1,EXPR2)'

     If EXPR1 is not `NULL', `IFNULL()' returns EXPR1; otherwise it
     returns EXPR2.  `IFNULL()' returns a numeric or string value,
     depending on the context in which it is used.

          mysql> SELECT IFNULL(1,0);
                  -> 1
          mysql> SELECT IFNULL(NULL,10);
                  -> 10
          mysql> SELECT IFNULL(1/0,10);
                  -> 10
          mysql> SELECT IFNULL(1/0,'yes');
                  -> 'yes'

     The default result value of `IFNULL(EXPR1,EXPR2)' is the more
     `general' of the two expressions, in the order `STRING', *Note
     `REAL': floating-point-types, or *Note `INTEGER': integer-types.
     Consider the case of a table based on expressions or where MySQL
     must internally store a value returned by `IFNULL()' in a
     temporary table:


          mysql> CREATE TABLE tmp SELECT IFNULL(1,'test') AS test;
          mysql> DESCRIBE tmp;
          +-------+--------------+------+-----+---------+-------+
          | Field | Type         | Null | Key | Default | Extra |
          +-------+--------------+------+-----+---------+-------+
          | test  | varbinary(4) | NO   |     |         |       |
          +-------+--------------+------+-----+---------+-------+

     In this example, the type of the `test' column is *Note
     `VARBINARY(4)': binary-varbinary.

   *  `NULLIF(EXPR1,EXPR2)'

     Returns `NULL' if `EXPR1 = EXPR2' is true, otherwise returns
     EXPR1. This is the same as `CASE WHEN EXPR1 = EXPR2 THEN NULL ELSE
     EXPR1 END'.

          mysql> SELECT NULLIF(1,1);
                  -> NULL
          mysql> SELECT NULLIF(1,2);
                  -> 1

     Note that MySQL evaluates EXPR1 twice if the arguments are not
     equal.


File: manual.info,  Node: string-functions,  Next: numeric-functions,  Prev: control-flow-functions,  Up: functions

12.5 String Functions
=====================

* Menu:

* string-comparison-functions::  String Comparison Functions
* regexp::                       Regular Expressions

*String Operators*

Name                          Description
`ASCII()'                     Return numeric value of left-most character
`BIN()'                       Return a string containing binary
                              representation of a  number
`BIT_LENGTH()'                Return length of argument in bits
`CHAR_LENGTH()'               Return number of characters in argument
`CHAR()'                      Return the character for each integer
                              passed
`CHARACTER_LENGTH()'          A synonym for CHAR_LENGTH()
`CONCAT_WS()'                 Return concatenate with  separator
`CONCAT()'                    Return concatenated string
`ELT()'                       Return string at index number
`EXPORT_SET()'                Return a string such that for every bit
                              set in the value  bits, you get an on
                              string and for every unset bit, you get an
                              off string
`FIELD()'                     Return the index (position) of the first
                              argument  in the subsequent arguments
`FIND_IN_SET()'               Return the index position of  the first
                              argument within the second argument
`FORMAT()'                    Return a number formatted to specified
                              number of decimal places
`HEX()'                       Return a hexadecimal representation of a
                              decimal or string value
`INSERT()'                    Insert a substring at the specified
                              position up to  the specified number of
                              characters
`INSTR()'                     Return the index of the first occurrence
                              of substring
`LCASE()'                     Synonym for LOWER()
`LEFT()'                      Return the leftmost number of characters
                              as specified
`LENGTH()'                    Return the length of a string in bytes
`LIKE'                        Simple pattern matching
`LOAD_FILE()'                 Load the named file
`LOCATE()'                    Return the position of the first
                              occurrence  of substring
`LOWER()'                     Return the argument in lowercase
`LPAD()'                      Return the string argument, left-padded
                              with the specified string
`LTRIM()'                     Remove leading spaces
`MAKE_SET()'                  Return a set of comma-separated strings
                              that have the corresponding bit in bits set
`MATCH'                       Perform full-text search
`MID()'                       Return a substring starting from the
                              specified position
`NOT LIKE'                    Negation of simple pattern matching
`NOT REGEXP'                  Negation of REGEXP
`OCT()'                       Return a string containing octal
                              representation of a  number
`OCTET_LENGTH()'              A synonym for LENGTH()
`ORD()'                       Return character code for leftmost
                              character of the  argument
`POSITION()'                  A synonym for LOCATE()
`QUOTE()'                     Escape the argument for use in an SQL
                              statement
`REGEXP'                      Pattern matching using regular expressions
`REPEAT()'                    Repeat a string the specified number of
                              times
`REPLACE()'                   Replace occurrences of a specified string
`REVERSE()'                   Reverse the characters in a string
`RIGHT()'                     Return the specified rightmost number of
                              characters
`RLIKE'                       Synonym for REGEXP
`RPAD()'                      Append string the specified number of times
`RTRIM()'                     Remove trailing spaces
`SOUNDEX()'                   Return a soundex string
`SOUNDS LIKE'                 Compare sounds
`SPACE()'                     Return a string of the specified number of
                              spaces
`STRCMP()'                    Compare two strings
`SUBSTR()'                    Return the substring as specified
`SUBSTRING_INDEX()'           Return a substring from a  string before
                              the specified number of occurrences of the
                              delimiter
`SUBSTRING()'                 Return the substring as specified
`TRIM()'                      Remove leading and trailing spaces
`UCASE()'                     Synonym for UPPER()
`UNHEX()'                     Return a string containing hex
                              representation of a  number
`UPPER()'                     Convert to uppercase

String-valued functions return `NULL' if the length of the result would
be greater than the value of the `max_allowed_packet' system variable.
See *Note server-parameters::.

For functions that operate on string positions, the first position is
numbered 1.

For functions that take length arguments, noninteger arguments are
rounded to the nearest integer.

   *  `ASCII(STR)'

     Returns the numeric value of the leftmost character of the string
     STR. Returns `0' if STR is the empty string. Returns `NULL' if STR
     is `NULL'.  `ASCII()' works for 8-bit characters.

          mysql> SELECT ASCII('2');
                  -> 50
          mysql> SELECT ASCII(2);
                  -> 50
          mysql> SELECT ASCII('dx');
                  -> 100

     See also the `ORD()' function.

   *  `BIN(N)'

     Returns a string representation of the binary value of N, where N
     is a longlong (*Note `BIGINT': integer-types.) number. This is
     equivalent to `CONV(N,10,2)'.  Returns `NULL' if N is `NULL'.

          mysql> SELECT BIN(12);
                  -> '1100'

   *  `BIT_LENGTH(STR)'

     Returns the length of the string STR in bits.

          mysql> SELECT BIT_LENGTH('text');
                  -> 32

   *  `CHAR(N,...  [USING CHARSET_NAME])'

     `CHAR()' interprets each argument N as an integer and returns a
     string consisting of the characters given by the code values of
     those integers. `NULL' values are skipped.

          mysql> SELECT CHAR(77,121,83,81,'76');
                  -> 'MySQL'
          mysql> SELECT CHAR(77,77.3,'77.3');
                  -> 'MMM'

     `CHAR()' arguments larger than 255 are converted into multiple
     result bytes. For example, `CHAR(256)' is equivalent to
     `CHAR(1,0)', and `CHAR(256*256)' is equivalent to `CHAR(1,0,0)':

          mysql> SELECT HEX(CHAR(1,0)), HEX(CHAR(256));
          +----------------+----------------+
          | HEX(CHAR(1,0)) | HEX(CHAR(256)) |
          +----------------+----------------+
          | 0100           | 0100           |
          +----------------+----------------+
          mysql> SELECT HEX(CHAR(1,0,0)), HEX(CHAR(256*256));
          +------------------+--------------------+
          | HEX(CHAR(1,0,0)) | HEX(CHAR(256*256)) |
          +------------------+--------------------+
          | 010000           | 010000             |
          +------------------+--------------------+

     By default, `CHAR()' returns a binary string. To produce a string
     in a given character set, use the optional `USING' clause:

          mysql> SELECT CHARSET(CHAR(0x65)), CHARSET(CHAR(0x65 USING utf8));
          +---------------------+--------------------------------+
          | CHARSET(CHAR(0x65)) | CHARSET(CHAR(0x65 USING utf8)) |
          +---------------------+--------------------------------+
          | binary              | utf8                           |
          +---------------------+--------------------------------+

     If `USING' is given and the result string is illegal for the given
     character set, a warning is issued.  Also, if strict SQL mode is
     enabled, the result from `CHAR()' becomes `NULL'.

   *  `CHAR_LENGTH(STR)'

     Returns the length of the string STR, measured in characters. A
     multi-byte character counts as a single character. This means that
     for a string containing five 2-byte characters, `LENGTH()' returns
     `10', whereas `CHAR_LENGTH()' returns `5'.

   *  `CHARACTER_LENGTH(STR)'

     `CHARACTER_LENGTH()' is a synonym for `CHAR_LENGTH()'.

   *  `CONCAT(STR1,STR2,...)'

     Returns the string that results from concatenating the arguments.
     May have one or more arguments. If all arguments are nonbinary
     strings, the result is a nonbinary string. If the arguments
     include any binary strings, the result is a binary string. A
     numeric argument is converted to its equivalent string form. This
     is a nonbinary string as of MySQL 5.5.3. Before 5.5.3, it is a
     binary string; to to avoid that and produce a nonbinary string,
     you can use an explicit type cast, as in this example:

          SELECT CONCAT(CAST(INT_COL AS CHAR), CHAR_COL);

     `CONCAT()' returns `NULL' if any argument is `NULL'.

          mysql> SELECT CONCAT('My', 'S', 'QL');
                  -> 'MySQL'
          mysql> SELECT CONCAT('My', NULL, 'QL');
                  -> NULL
          mysql> SELECT CONCAT(14.3);
                  -> '14.3'

     For quoted strings, concatenation can be performed by placing the
     strings next to each other:

          mysql> SELECT 'My' 'S' 'QL';
                  -> 'MySQL'

   *  `CONCAT_WS(SEPARATOR,STR1,STR2,...)'

     `CONCAT_WS()' stands for Concatenate With Separator and is a
     special form of `CONCAT()'. The first argument is the separator
     for the rest of the arguments. The separator is added between the
     strings to be concatenated. The separator can be a string, as can
     the rest of the arguments. If the separator is `NULL', the result
     is `NULL'.

          mysql> SELECT CONCAT_WS(',','First name','Second name','Last Name');
                  -> 'First name,Second name,Last Name'
          mysql> SELECT CONCAT_WS(',','First name',NULL,'Last Name');
                  -> 'First name,Last Name'

     `CONCAT_WS()' does not skip empty strings. However, it does skip
     any `NULL' values after the separator argument.

   *  `ELT(N,STR1,STR2,STR3,...)'

     `ELT()' returns the Nth element of the list of strings: STR1 if N
     = `1', STR2 if N = `2', and so on. Returns `NULL' if N is less
     than `1' or greater than the number of arguments.  `ELT()' is the
     complement of `FIELD()'.

          mysql> SELECT ELT(1, 'ej', 'Heja', 'hej', 'foo');
                  -> 'ej'
          mysql> SELECT ELT(4, 'ej', 'Heja', 'hej', 'foo');
                  -> 'foo'

   *  `EXPORT_SET(BITS,ON,OFF[,SEPARATOR[,NUMBER_OF_BITS]])'

     Returns a string such that for every bit set in the value BITS,
     you get an ON string and for every bit not set in the value, you
     get an OFF string. Bits in BITS are examined from right to left
     (from low-order to high-order bits).  Strings are added to the
     result from left to right, separated by the SEPARATOR string (the
     default being the comma character ``,''). The number of bits
     examined is given by NUMBER_OF_BITS, which has a default of 64 if
     not specified.  NUMBER_OF_BITS is silently clipped to 64 if larger
     than 64. It is treated as an unsigned integer, so a value of -1 is
     effectively the same as 64.

          mysql> SELECT EXPORT_SET(5,'Y','N',',',4);
                  -> 'Y,N,Y,N'
          mysql> SELECT EXPORT_SET(6,'1','0',',',10);
                  -> '0,1,1,0,0,0,0,0,0,0'

   *  `FIELD(STR,STR1,STR2,STR3,...)'

     Returns the index (position) of STR in the STR1, STR2, STR3, `...'
     list.  Returns `0' if STR is not found.

     If all arguments to `FIELD()' are strings, all arguments are
     compared as strings. If all arguments are numbers, they are
     compared as numbers.  Otherwise, the arguments are compared as
     double.

     If STR is `NULL', the return value is `0' because `NULL' fails
     equality comparison with any value. `FIELD()' is the complement of
     `ELT()'.

          mysql> SELECT FIELD('ej', 'Hej', 'ej', 'Heja', 'hej', 'foo');
                  -> 2
          mysql> SELECT FIELD('fo', 'Hej', 'ej', 'Heja', 'hej', 'foo');
                  -> 0

   *  `FIND_IN_SET(STR,STRLIST)'

     Returns a value in the range of 1 to N if the string STR is in the
     string list STRLIST consisting of N substrings. A string list is a
     string composed of substrings separated by ``,'' characters. If
     the first argument is a constant string and the second is a column
     of type *Note `SET': set, the `FIND_IN_SET()' function is
     optimized to use bit arithmetic. Returns `0' if STR is not in
     STRLIST or if STRLIST is the empty string.  Returns `NULL' if
     either argument is `NULL'. This function does not work properly if
     the first argument contains a comma (``,'') character.

          mysql> SELECT FIND_IN_SET('b','a,b,c,d');
                  -> 2

   *  `FORMAT(X,D[,LOCALE])'

     Formats the number X to a format like `'#,###,###.##'', rounded to
     D decimal places, and returns the result as a string. If D is `0',
     the result has no decimal point or fractional part.

     The optional third parameter enables a locale to be specified to
     be used for the result number's decimal point, thousands
     separator, and grouping between separators. Permissible locale
     values are the same as the legal values for the `lc_time_names'
     system variable (see *Note locale-support::). If no locale is
     specified, the default is `'en_US''.

          mysql> SELECT FORMAT(12332.123456, 4);
                  -> '12,332.1235'
          mysql> SELECT FORMAT(12332.1,4);
                  -> '12,332.1000'
          mysql> SELECT FORMAT(12332.2,0);
                  -> '12,332'
          mysql> SELECT FORMAT(12332.2,2,'de_DE');
                  -> '12.332,20'

   *  `HEX(STR)', `HEX(N)'

     For a string argument STR, `HEX()' returns a hexadecimal string
     representation of STR where each character in STR is converted to
     two hexadecimal digits. The inverse of this operation is performed
     by the `UNHEX()' function.

     For a numeric argument N, `HEX()' returns a hexadecimal string
     representation of the value of N treated as a longlong (*Note
     `BIGINT': integer-types.) number. This is equivalent to
     `CONV(N,10,16)'.  The inverse of this operation is performed by
     `CONV(HEX(N),16,10)'.

          mysql> SELECT 0x616263, HEX('abc'), UNHEX(HEX('abc'));
                  -> 'abc', 616263, 'abc'
          mysql> SELECT HEX(255), CONV(HEX(255),16,10);
                  -> 'FF', 255

   *  `INSERT(STR,POS,LEN,NEWSTR)'

     Returns the string STR, with the substring beginning at position
     POS and LEN characters long replaced by the string NEWSTR. Returns
     the original string if POS is not within the length of the string.
     Replaces the rest of the string from position POS if LEN is not
     within the length of the rest of the string. Returns `NULL' if any
     argument is `NULL'.

          mysql> SELECT INSERT('Quadratic', 3, 4, 'What');
                  -> 'QuWhattic'
          mysql> SELECT INSERT('Quadratic', -1, 4, 'What');
                  -> 'Quadratic'
          mysql> SELECT INSERT('Quadratic', 3, 100, 'What');
                  -> 'QuWhat'

     This function is multi-byte safe.

   *  `INSTR(STR,SUBSTR)'

     Returns the position of the first occurrence of substring SUBSTR
     in string STR. This is the same as the two-argument form of
     `LOCATE()', except that the order of the arguments is reversed.

          mysql> SELECT INSTR('foobarbar', 'bar');
                  -> 4
          mysql> SELECT INSTR('xbar', 'foobar');
                  -> 0

     This function is multi-byte safe, and is case sensitive only if at
     least one argument is a binary string.

   *  `LCASE(STR)'

     `LCASE()' is a synonym for `LOWER()'.

   *  `LEFT(STR,LEN)'

     Returns the leftmost LEN characters from the string STR, or `NULL'
     if any argument is `NULL'.

          mysql> SELECT LEFT('foobarbar', 5);
                  -> 'fooba'

     This function is multi-byte safe.

   *  `LENGTH(STR)'

     Returns the length of the string STR, measured in bytes. A
     multi-byte character counts as multiple bytes. This means that for
     a string containing five 2-byte characters, `LENGTH()' returns
     `10', whereas `CHAR_LENGTH()' returns `5'.

          mysql> SELECT LENGTH('text');
                  -> 4

   *  `LOAD_FILE(FILE_NAME)'

     Reads the file and returns the file contents as a string. To use
     this function, the file must be located on the server host, you
     must specify the full path name to the file, and you must have the
     `FILE' privilege.  The file must be readable by all and its size
     less than `max_allowed_packet' bytes. If the `secure_file_priv'
     system variable is set to a nonempty directory name, the file to be
     loaded must be located in that directory.

     If the file does not exist or cannot be read because one of the
     preceding conditions is not satisfied, the function returns `NULL'.

     The `character_set_filesystem' system variable controls
     interpretation of file names that are given as literal strings.

          mysql> UPDATE t
                      SET blob_col=LOAD_FILE('/tmp/picture')
                      WHERE id=1;

   *  `LOCATE(SUBSTR,STR)', `LOCATE(SUBSTR,STR,POS)'

     The first syntax returns the position of the first occurrence of
     substring SUBSTR in string STR. The second syntax returns the
     position of the first occurrence of substring SUBSTR in string
     STR, starting at position POS. Returns `0' if SUBSTR is not in STR.

          mysql> SELECT LOCATE('bar', 'foobarbar');
                  -> 4
          mysql> SELECT LOCATE('xbar', 'foobar');
                  -> 0
          mysql> SELECT LOCATE('bar', 'foobarbar', 5);
                  -> 7

     This function is multi-byte safe, and is case-sensitive only if at
     least one argument is a binary string.

   *  `LOWER(STR)'

     Returns the string STR with all characters changed to lowercase
     according to the current character set mapping. The default is
     `latin1' (cp1252 West European).

          mysql> SELECT LOWER('QUADRATICALLY');
                  -> 'quadratically'

     `LOWER()' (and `UPPER()') are ineffective when applied to binary
     strings (*Note `BINARY': binary-varbinary, *Note `VARBINARY':
     binary-varbinary, *Note `BLOB': blob.). To perform lettercase
     conversion, convert the string to a nonbinary string:

          mysql> SET @str = BINARY 'New York';
          mysql> SELECT LOWER(@str), LOWER(CONVERT(@str USING latin1));
          +-------------+-----------------------------------+
          | LOWER(@str) | LOWER(CONVERT(@str USING latin1)) |
          +-------------+-----------------------------------+
          | New York    | new york                          |
          +-------------+-----------------------------------+

     This function is multi-byte safe.

   *  `LPAD(STR,LEN,PADSTR)'

     Returns the string STR, left-padded with the string PADSTR to a
     length of LEN characters. If STR is longer than LEN, the return
     value is shortened to LEN characters.

          mysql> SELECT LPAD('hi',4,'??');
                  -> '??hi'
          mysql> SELECT LPAD('hi',1,'??');
                  -> 'h'

   *  `LTRIM(STR)'

     Returns the string STR with leading space characters removed.

          mysql> SELECT LTRIM('  barbar');
                  -> 'barbar'

     This function is multi-byte safe.

   *  `MAKE_SET(BITS,STR1,STR2,...)'

     Returns a set value (a string containing substrings separated by
     ``,'' characters) consisting of the strings that have the
     corresponding bit in BITS set.  STR1 corresponds to bit 0, STR2 to
     bit 1, and so on.  `NULL' values in STR1, STR2, `...' are not
     appended to the result.

          mysql> SELECT MAKE_SET(1,'a','b','c');
                  -> 'a'
          mysql> SELECT MAKE_SET(1 | 4,'hello','nice','world');
                  -> 'hello,world'
          mysql> SELECT MAKE_SET(1 | 4,'hello','nice',NULL,'world');
                  -> 'hello'
          mysql> SELECT MAKE_SET(0,'a','b','c');
                  -> ''

   *  `MID(STR,POS,LEN)'

     `MID(STR,POS,LEN)' is a synonym for `SUBSTRING(STR,POS,LEN)'.

   *  `OCT(N)'

     Returns a string representation of the octal value of N, where N
     is a longlong (*Note `BIGINT': integer-types.) number. This is
     equivalent to `CONV(N,10,8)'.  Returns `NULL' if N is `NULL'.

          mysql> SELECT OCT(12);
                  -> '14'

   *  `OCTET_LENGTH(STR)'

     `OCTET_LENGTH()' is a synonym for `LENGTH()'.

   *  `ORD(STR)'

     If the leftmost character of the string STR is a multi-byte
     character, returns the code for that character, calculated from the
     numeric values of its constituent bytes using this formula:

            (1st byte code)
          + (2nd byte code * 256)
          + (3rd byte code * 256^2) ...

     If the leftmost character is not a multi-byte character, `ORD()'
     returns the same value as the `ASCII()' function.

          mysql> SELECT ORD('2');
                  -> 50

   *  `POSITION(SUBSTR IN STR)'

     `POSITION(SUBSTR IN STR)' is a synonym for `LOCATE(SUBSTR,STR)'.

   *  `QUOTE(STR)'

     Quotes a string to produce a result that can be used as a properly
     escaped data value in an SQL statement. The string is returned
     enclosed by single quotation marks and with each instance of
     backslash (``\''), single quote (``'''), ASCII `NUL', and
     Control+Z preceded by a backslash.  If the argument is `NULL', the
     return value is the word `NULL' without enclosing single quotation
     marks.

          mysql> SELECT QUOTE('Don\'t!');
                  -> 'Don\'t!'
          mysql> SELECT QUOTE(NULL);
                  -> NULL

     For comparison, see the quoting rules for literal strings and
     within the C API in *Note string-literals::, and *Note
     mysql-real-escape-string::.

   *  `REPEAT(STR,COUNT)'

     Returns a string consisting of the string STR repeated COUNT
     times. If COUNT is less than 1, returns an empty string. Returns
     `NULL' if STR or COUNT are `NULL'.

          mysql> SELECT REPEAT('MySQL', 3);
                  -> 'MySQLMySQLMySQL'

   *  `REPLACE(STR,FROM_STR,TO_STR)'

     Returns the string STR with all occurrences of the string FROM_STR
     replaced by the string TO_STR.  `REPLACE()' performs a
     case-sensitive match when searching for FROM_STR.

          mysql> SELECT REPLACE('www.mysql.com', 'w', 'Ww');
                  -> 'WwWwWw.mysql.com'

     This function is multi-byte safe.

   *  `REVERSE(STR)'

     Returns the string STR with the order of the characters reversed.

          mysql> SELECT REVERSE('abc');
                  -> 'cba'

     This function is multi-byte safe.

   *  `RIGHT(STR,LEN)'

     Returns the rightmost LEN characters from the string STR, or
     `NULL' if any argument is `NULL'.

          mysql> SELECT RIGHT('foobarbar', 4);
                  -> 'rbar'

     This function is multi-byte safe.

   *  `RPAD(STR,LEN,PADSTR)'

     Returns the string STR, right-padded with the string PADSTR to a
     length of LEN characters. If STR is longer than LEN, the return
     value is shortened to LEN characters.

          mysql> SELECT RPAD('hi',5,'?');
                  -> 'hi???'
          mysql> SELECT RPAD('hi',1,'?');
                  -> 'h'

     This function is multi-byte safe.

   *  `RTRIM(STR)'

     Returns the string STR with trailing space characters removed.

          mysql> SELECT RTRIM('barbar   ');
                  -> 'barbar'

     This function is multi-byte safe.

   *  `SOUNDEX(STR)'

     Returns a soundex string from STR.  Two strings that sound almost
     the same should have identical soundex strings. A standard soundex
     string is four characters long, but the `SOUNDEX()' function
     returns an arbitrarily long string. You can use `SUBSTRING()' on
     the result to get a standard soundex string. All nonalphabetic
     characters in STR are ignored. All international alphabetic
     characters outside the A-Z range are treated as vowels.

     *Important*:

     When using `SOUNDEX()', you should be aware of the following
     limitations:

        * This function, as currently implemented, is intended to work
          well with strings that are in the English language only.
          Strings in other languages may not produce reliable results.

        * This function is not guaranteed to provide consistent results
          with strings that use multi-byte character sets, including
          `utf-8'.

          We hope to remove these limitations in a future release.  See
          Bug #22638 for more information.

          mysql> SELECT SOUNDEX('Hello');
                  -> 'H400'
          mysql> SELECT SOUNDEX('Quadratically');
                  -> 'Q36324'

     *Note*:

     This function implements the original Soundex algorithm, not the
     more popular enhanced version (also described by D.  Knuth). The
     difference is that original version discards vowels first and
     duplicates second, whereas the enhanced version discards
     duplicates first and vowels second.

   *  `EXPR1 SOUNDS LIKE EXPR2'

     This is the same as `SOUNDEX(EXPR1) = SOUNDEX(EXPR2)'.

   *  `SPACE(N)'

     Returns a string consisting of N space characters.

          mysql> SELECT SPACE(6);
                  -> '      '

   *  `SUBSTR(STR,POS)', `SUBSTR(STR FROM POS)', `SUBSTR(STR,POS,LEN)',
     `SUBSTR(STR FROM POS FOR LEN)'

     `SUBSTR()' is a synonym for `SUBSTRING()'.

   *  `SUBSTRING(STR,POS)', `SUBSTRING(STR FROM POS)',
     `SUBSTRING(STR,POS,LEN)', `SUBSTRING(STR FROM POS FOR LEN)'

     The forms without a LEN argument return a substring from string STR
     starting at position POS. The forms with a LEN argument return a
     substring LEN characters long from string STR, starting at position
     POS. The forms that use `FROM' are standard SQL syntax. It is also
     possible to use a negative value for POS. In this case, the
     beginning of the substring is POS characters from the end of the
     string, rather than the beginning. A negative value may be used
     for POS in any of the forms of this function.

     For all forms of `SUBSTRING()', the position of the first
     character in the string from which the substring is to be
     extracted is reckoned as `1'.

          mysql> SELECT SUBSTRING('Quadratically',5);
                  -> 'ratically'
          mysql> SELECT SUBSTRING('foobarbar' FROM 4);
                  -> 'barbar'
          mysql> SELECT SUBSTRING('Quadratically',5,6);
                  -> 'ratica'
          mysql> SELECT SUBSTRING('Sakila', -3);
                  -> 'ila'
          mysql> SELECT SUBSTRING('Sakila', -5, 3);
                  -> 'aki'
          mysql> SELECT SUBSTRING('Sakila' FROM -4 FOR 2);
                  -> 'ki'

     This function is multi-byte safe.

     If LEN is less than 1, the result is the empty string.

   *  `SUBSTRING_INDEX(STR,DELIM,COUNT)'

     Returns the substring from string STR before COUNT occurrences of
     the delimiter DELIM. If COUNT is positive, everything to the left
     of the final delimiter (counting from the left) is returned. If
     COUNT is negative, everything to the right of the final delimiter
     (counting from the right) is returned.  `SUBSTRING_INDEX()'
     performs a case-sensitive match when searching for DELIM.

          mysql> SELECT SUBSTRING_INDEX('www.mysql.com', '.', 2);
                  -> 'www.mysql'
          mysql> SELECT SUBSTRING_INDEX('www.mysql.com', '.', -2);
                  -> 'mysql.com'

     This function is multi-byte safe.

   *  `TRIM([{BOTH | LEADING | TRAILING} [REMSTR] FROM] STR)',
     `TRIM([REMSTR FROM] STR)'

     Returns the string STR with all REMSTR prefixes or suffixes
     removed. If none of the specifiers `BOTH', `LEADING', or
     `TRAILING' is given, `BOTH' is assumed.  REMSTR is optional and,
     if not specified, spaces are removed.

          mysql> SELECT TRIM('  bar   ');
                  -> 'bar'
          mysql> SELECT TRIM(LEADING 'x' FROM 'xxxbarxxx');
                  -> 'barxxx'
          mysql> SELECT TRIM(BOTH 'x' FROM 'xxxbarxxx');
                  -> 'bar'
          mysql> SELECT TRIM(TRAILING 'xyz' FROM 'barxxyz');
                  -> 'barx'

     This function is multi-byte safe.

   *  `UCASE(STR)'

     `UCASE()' is a synonym for `UPPER()'.

   *  `UNHEX(STR)'

     For a string argument STR, `UNHEX(STR)' performs the inverse
     operation of `HEX(STR)'.  That is, it interprets each pair of
     characters in the argument as a hexadecimal number and converts it
     to the character represented by the number. The return value is a
     binary string.

          mysql> SELECT UNHEX('4D7953514C');
                  -> 'MySQL'
          mysql> SELECT 0x4D7953514C;
                  -> 'MySQL'
          mysql> SELECT UNHEX(HEX('string'));
                  -> 'string'
          mysql> SELECT HEX(UNHEX('1267'));
                  -> '1267'

     The characters in the argument string must be legal hexadecimal
     digits: `'0'' ..  `'9'', `'A'' ..  `'F'', `'a'' ..  `'f''. If the
     argument contains any nonhexadecimal digits, the result is `NULL':

          mysql> SELECT UNHEX('GG');
          +-------------+
          | UNHEX('GG') |
          +-------------+
          | NULL        |
          +-------------+

     A `NULL' result can occur if the argument to `UNHEX()' is a *Note
     `BINARY': binary-varbinary. column, because values are padded with
     0x00 bytes when stored but those bytes are not stripped on
     retrieval. For example, `'41'' is stored into a `CHAR(3)' column as
     `'41 '' and retrieved as `'41'' (with the trailing pad space
     stripped), so `UNHEX()' for the column value returns `'A''. By
     contrast `'41'' is stored into a `BINARY(3)' column as `'41\0''
     and retrieved as `'41\0'' (with the trailing pad `0x00' byte not
     stripped).  `'\0'' is not a legal hexadecimal digit, so `UNHEX()'
     for the column value returns `NULL'.

     For a numeric argument N, the inverse of `HEX(N)' is not performed
     by `UNHEX()'.  Use `CONV(HEX(N),16,10)' instead. See the
     description of `HEX()'.

   *  `UPPER(STR)'

     Returns the string STR with all characters changed to uppercase
     according to the current character set mapping. The default is
     `latin1' (cp1252 West European).

          mysql> SELECT UPPER('Hej');
                  -> 'HEJ'

     See the description of `LOWER()' for information that also applies
     to `UPPER()', such as information about how to perform lettercase
     conversion of binary strings (*Note `BINARY': binary-varbinary,
     *Note `VARBINARY': binary-varbinary, *Note `BLOB': blob.) for
     which these functions are ineffective.

     This function is multi-byte safe.


File: manual.info,  Node: string-comparison-functions,  Next: regexp,  Prev: string-functions,  Up: string-functions

12.5.1 String Comparison Functions
----------------------------------

*String Comparison Operators*

Name                          Description
`LIKE'                        Simple pattern matching
`NOT LIKE'                    Negation of simple pattern matching
`STRCMP()'                    Compare two strings

If a string function is given a binary string as an argument, the
resulting string is also a binary string. A number converted to a
string is treated as a binary string. This affects only comparisons.

Normally, if any expression in a string comparison is case sensitive,
the comparison is performed in case-sensitive fashion.

   *  `EXPR LIKE PAT [ESCAPE 'ESCAPE_CHAR']'

     Pattern matching using SQL simple regular expression comparison.
     Returns `1' (`TRUE') or `0' (`FALSE'). If either EXPR or PAT is
     `NULL', the result is `NULL'.

     The pattern need not be a literal string. For example, it can be
     specified as a string expression or table column.

     Per the SQL standard, `LIKE' performs matching on a per-character
     basis, thus it can produce results different from the `='
     comparison operator:

          mysql> SELECT 'a"' LIKE 'ae' COLLATE latin1_german2_ci;
          +-----------------------------------------+
          | 'a"' LIKE 'ae' COLLATE latin1_german2_ci |
          +-----------------------------------------+
          |                                       0 |
          +-----------------------------------------+
          mysql> SELECT 'a"' = 'ae' COLLATE latin1_german2_ci;
          +--------------------------------------+
          | 'a"' = 'ae' COLLATE latin1_german2_ci |
          +--------------------------------------+
          |                                    1 |
          +--------------------------------------+

     In particular, trailing spaces are significant, which is not true
     for *Note `CHAR': char. or *Note `VARCHAR': char. comparisons
     performed with the `=' operator:

          mysql> SELECT 'a' = 'a ', 'a' LIKE 'a ';
          +------------+---------------+
          | 'a' = 'a ' | 'a' LIKE 'a ' |
          +------------+---------------+
          |          1 |             0 |
          +------------+---------------+
          1 row in set (0.00 sec)

     With `LIKE' you can use the following two wildcard characters in
     the pattern.

     This table lists wildcard characters that can be used with the
     `LIKE' string comparison function and provides a description of
     each character.

     Character     Description
     `%'           Matches any number of characters, even zero characters
     `_'           Matches exactly one character

          mysql> SELECT 'David!' LIKE 'David_';
                  -> 1
          mysql> SELECT 'David!' LIKE '%D%v%';
                  -> 1

     To test for literal instances of a wildcard character, precede it
     by the escape character. If you do not specify the `ESCAPE'
     character, ``\'' is assumed.

     This table lists strings that are assumed if you do not specify
     the `ESCAPE' character when testing for literal instances of
     wildcard characters.  A description of each string is provided.

     String        Description
     `\%'          Matches one ``%'' character
     `\_'          Matches one ``_'' character

          mysql> SELECT 'David!' LIKE 'David\_';
                  -> 0
          mysql> SELECT 'David_' LIKE 'David\_';
                  -> 1

     To specify a different escape character, use the `ESCAPE' clause:

          mysql> SELECT 'David_' LIKE 'David|_' ESCAPE '|';
                  -> 1

     The escape sequence should be empty or one character long.  The
     expression must evaluate as a constant at execution time. If the
     `NO_BACKSLASH_ESCAPES' SQL mode is enabled, the sequence cannot be
     empty.

     The following two statements illustrate that string comparisons
     are not case sensitive unless one of the operands is a binary
     string:

          mysql> SELECT 'abc' LIKE 'ABC';
                  -> 1
          mysql> SELECT 'abc' LIKE BINARY 'ABC';
                  -> 0

     In MySQL, `LIKE' is permitted on numeric expressions. (This is an
     extension to the standard SQL `LIKE'.)

          mysql> SELECT 10 LIKE '1%';
                  -> 1

     *Note*:

     Because MySQL uses C escape syntax in strings (for example, ``\n''
     to represent a newline character), you must double any ``\'' that
     you use in `LIKE' strings. For example, to search for ``\n'',
     specify it as ``\\n''. To search for ``\'', specify it as
     ``\\\\''; this is because the backslashes are stripped once by the
     parser and again when the pattern match is made, leaving a single
     backslash to be matched against.

     Exception: At the end of the pattern string, backslash can be
     specified as ``\\''. At the end of the string, backslash stands
     for itself because there is nothing following to escape. Suppose
     that a table contains the following values:

          mysql> SELECT filename FROM t1;
          +--------------+
          | filename     |
          +--------------+
          | C:           |
          | C:\          |
          | C:\Programs  |
          | C:\Programs\ |
          +--------------+

     To test for values that end with backslash, you can match the
     values using either of the following patterns:

          mysql> SELECT filename, filename LIKE '%\\' FROM t1;
          +--------------+---------------------+
          | filename     | filename LIKE '%\\' |
          +--------------+---------------------+
          | C:           |                   0 |
          | C:\          |                   1 |
          | C:\Programs  |                   0 |
          | C:\Programs\ |                   1 |
          +--------------+---------------------+

          mysql> SELECT filename, filename LIKE '%\\\\' FROM t1;
          +--------------+-----------------------+
          | filename     | filename LIKE '%\\\\' |
          +--------------+-----------------------+
          | C:           |                     0 |
          | C:\          |                     1 |
          | C:\Programs  |                     0 |
          | C:\Programs\ |                     1 |
          +--------------+-----------------------+

   *  `EXPR NOT LIKE PAT [ESCAPE 'ESCAPE_CHAR']'

     This is the same as `NOT (EXPR LIKE PAT [ESCAPE 'ESCAPE_CHAR'])'.

     *Note*:

     Aggregate queries involving `NOT LIKE' comparisons with columns
     containing `NULL' may yield unexpected results. For example,
     consider the following table and data:

          CREATE TABLE foo (bar VARCHAR(10));

          INSERT INTO foo VALUES (NULL), (NULL);

     The query `SELECT COUNT(*) FROM foo WHERE bar LIKE '%baz%';'
     returns `0'. You might assume that `SELECT COUNT(*) FROM foo WHERE
     bar NOT LIKE '%baz%';' would return `2'. However, this is not the
     case: The second query returns `0'. This is because `NULL NOT LIKE
     EXPR' always returns `NULL', regardless of the value of EXPR. The
     same is true for aggregate queries involving `NULL' and
     comparisons using `NOT RLIKE' or `NOT REGEXP'. In such cases, you
     must test explicitly for `NOT NULL' using `OR' (and not `AND'), as
     shown here:

          SELECT COUNT(*) FROM foo WHERE bar NOT LIKE '%baz%' OR bar IS NULL;

   *  `STRCMP(EXPR1,EXPR2)'

     `STRCMP()' returns `0' if the strings are the same, `-1' if the
     first argument is smaller than the second according to the current
     sort order, and `1' otherwise.

          mysql> SELECT STRCMP('text', 'text2');
                  -> -1
          mysql> SELECT STRCMP('text2', 'text');
                  -> 1
          mysql> SELECT STRCMP('text', 'text');
                  -> 0

     `STRCMP()' performs the comparison using the collation of the
     arguments.

          mysql> SET @s1 = _latin1 'x' COLLATE latin1_general_ci;
          mysql> SET @s2 = _latin1 'X' COLLATE latin1_general_ci;
          mysql> SET @s3 = _latin1 'x' COLLATE latin1_general_cs;
          mysql> SET @s4 = _latin1 'X' COLLATE latin1_general_cs;
          mysql> SELECT STRCMP(@s1, @s2), STRCMP(@s3, @s4);
          +------------------+------------------+
          | STRCMP(@s1, @s2) | STRCMP(@s3, @s4) |
          +------------------+------------------+
          |                0 |                1 |
          +------------------+------------------+

     If the collations are incompatible, one of the arguments must be
     converted to be compatible with the other. See *Note
     charset-collation-expressions::.


          mysql> SELECT STRCMP(@s1, @s3);
          ERROR 1267 (HY000) at line 10: Illegal mix of collations (latin1_general_ci,IMPLICIT) and (latin1_general_cs,IMPLICIT) for operation 'strcmp'
          mysql> SELECT STRCMP(@s1, @s3 COLLATE latin1_general_ci);
          +--------------------------------------------+
          | STRCMP(@s1, @s3 COLLATE latin1_general_ci) |
          +--------------------------------------------+
          |                                          0 |
          +--------------------------------------------+


File: manual.info,  Node: regexp,  Prev: string-comparison-functions,  Up: string-functions

12.5.2 Regular Expressions
--------------------------

*String Regular Expression Operators*

Name                          Description
`NOT REGEXP'                  Negation of REGEXP
`REGEXP'                      Pattern matching using regular expressions
`RLIKE'                       Synonym for REGEXP

A regular expression is a powerful way of specifying a pattern for a
complex search.

MySQL uses Henry Spencer's implementation of regular expressions, which
is aimed at conformance with POSIX 1003.2.  MySQL uses the extended
version to support pattern-matching operations performed with the
`REGEXP' operator in SQL statements.

This section summarizes, with examples, the special characters and
constructs that can be used in MySQL for `REGEXP' operations. It does
not contain all the details that can be found in Henry Spencer's
`regex(7)' manual page. That manual page is included in MySQL source
distributions, in the `regex.7' file under the `regex' directory. See
also *Note pattern-matching::.

   *  `EXPR NOT REGEXP PAT', `EXPR NOT RLIKE PAT'

     This is the same as `NOT (EXPR REGEXP PAT)'.

   *  `EXPR REGEXP PAT', `EXPR RLIKE PAT'

     Performs a pattern match of a string expression EXPR against a
     pattern PAT. The pattern can be an extended regular expression.
     The syntax for regular expressions is discussed in *Note regexp::.
     Returns `1' if EXPR matches PAT; otherwise it returns `0'. If
     either EXPR or PAT is `NULL', the result is `NULL'.  `RLIKE' is a
     synonym for `REGEXP', provided for `mSQL' compatibility.

     The pattern need not be a literal string. For example, it can be
     specified as a string expression or table column.

     *Note*:

     Because MySQL uses the C escape syntax in strings (for example,
     ``\n'' to represent the newline character), you must double any
     ``\'' that you use in your `REGEXP' strings.

     `REGEXP' is not case sensitive, except when used with binary
     strings.

          mysql> SELECT 'Monty!' REGEXP '.*';
                  -> 1
          mysql> SELECT 'new*\n*line' REGEXP 'new\\*.\\*line';
                  -> 1
          mysql> SELECT 'a' REGEXP 'A', 'a' REGEXP BINARY 'A';
                  -> 1  0
          mysql> SELECT 'a' REGEXP '^[a-d]';
                  -> 1

     `REGEXP' and `RLIKE' use the character set and collations of the
     arguments when deciding the type of a character and performing the
     comparison. If the arguments have different character sets or
     collations, coercibility rules apply as described in *Note
     charset-collation-expressions::.

     *Warning*:

     The `REGEXP' and `RLIKE' operators work in byte-wise fashion, so
     they are not multi-byte safe and may produce unexpected results
     with multi-byte character sets. In addition, these operators
     compare characters by their byte values and accented characters
     may not compare as equal even if a given collation treats them as
     equal.

A regular expression describes a set of strings. The simplest regular
expression is one that has no special characters in it.  For example,
the regular expression `hello' matches `hello' and nothing else.

Nontrivial regular expressions use certain special constructs so that
they can match more than one string. For example, the regular
expression `hello|word' matches either the string `hello' or the string
`word'.

As a more complex example, the regular expression `B[an]*s' matches any
of the strings `Bananas', `Baaaaas', `Bs', and any other string
starting with a `B', ending with an `s', and containing any number of
`a' or `n' characters in between.

A regular expression for the `REGEXP' operator may use any of the
following special characters and constructs:

   * `^'

     Match the beginning of a string.

          mysql> SELECT 'fo\nfo' REGEXP '^fo$';                   -> 0
          mysql> SELECT 'fofo' REGEXP '^fo';                      -> 1

   * `$'

     Match the end of a string.

          mysql> SELECT 'fo\no' REGEXP '^fo\no$';                 -> 1
          mysql> SELECT 'fo\no' REGEXP '^fo$';                    -> 0

   * `.'

     Match any character (including carriage return and newline).

          mysql> SELECT 'fofo' REGEXP '^f.*$';                    -> 1
          mysql> SELECT 'fo\r\nfo' REGEXP '^f.*$';                -> 1

   * `a*'

     Match any sequence of zero or more `a' characters.

          mysql> SELECT 'Ban' REGEXP '^Ba*n';                     -> 1
          mysql> SELECT 'Baaan' REGEXP '^Ba*n';                   -> 1
          mysql> SELECT 'Bn' REGEXP '^Ba*n';                      -> 1

   * `a+'

     Match any sequence of one or more `a' characters.

          mysql> SELECT 'Ban' REGEXP '^Ba+n';                     -> 1
          mysql> SELECT 'Bn' REGEXP '^Ba+n';                      -> 0

   * `a?'

     Match either zero or one `a' character.

          mysql> SELECT 'Bn' REGEXP '^Ba?n';                      -> 1
          mysql> SELECT 'Ban' REGEXP '^Ba?n';                     -> 1
          mysql> SELECT 'Baan' REGEXP '^Ba?n';                    -> 0

   * `de|abc'

     Match either of the sequences `de' or `abc'.

          mysql> SELECT 'pi' REGEXP 'pi|apa';                     -> 1
          mysql> SELECT 'axe' REGEXP 'pi|apa';                    -> 0
          mysql> SELECT 'apa' REGEXP 'pi|apa';                    -> 1
          mysql> SELECT 'apa' REGEXP '^(pi|apa)$';                -> 1
          mysql> SELECT 'pi' REGEXP '^(pi|apa)$';                 -> 1
          mysql> SELECT 'pix' REGEXP '^(pi|apa)$';                -> 0

   * `(abc)*'

     Match zero or more instances of the sequence `abc'.

          mysql> SELECT 'pi' REGEXP '^(pi)*$';                    -> 1
          mysql> SELECT 'pip' REGEXP '^(pi)*$';                   -> 0
          mysql> SELECT 'pipi' REGEXP '^(pi)*$';                  -> 1

   * `{1}', `{2,3}'

     `{n}' or `{m,n}' notation provides a more general way of writing
     regular expressions that match many occurrences of the previous
     atom (or `piece') of the pattern. `m' and `n' are integers.

        * `a*'

          Can be written as `a{0,}'.

        * `a+'

          Can be written as `a{1,}'.

        * `a?'

          Can be written as `a{0,1}'.

     To be more precise, `a{n}' matches exactly `n' instances of `a'.
     `a{n,}' matches `n' or more instances of `a'.  `a{m,n}' matches `m'
     through `n' instances of `a', inclusive.

     `m' and `n' must be in the range from `0' to `RE_DUP_MAX' (default
     255), inclusive. If both `m' and `n' are given, `m' must be less
     than or equal to `n'.

          mysql> SELECT 'abcde' REGEXP 'a[bcd]{2}e';              -> 0
          mysql> SELECT 'abcde' REGEXP 'a[bcd]{3}e';              -> 1
          mysql> SELECT 'abcde' REGEXP 'a[bcd]{1,10}e';           -> 1

   * `[a-dX]', `[^a-dX]'

     Matches any character that is (or is not, if ^ is used) either
     `a', `b', `c', `d' or `X'. A `-' character between two other
     characters forms a range that matches all characters from the
     first character to the second. For example, `[0-9]' matches any
     decimal digit.  To include a literal `]' character, it must
     immediately follow the opening bracket `['.  To include a literal
     `-' character, it must be written first or last. Any character
     that does not have a defined special meaning inside a `[]' pair
     matches only itself.

          mysql> SELECT 'aXbc' REGEXP '[a-dXYZ]';                 -> 1
          mysql> SELECT 'aXbc' REGEXP '^[a-dXYZ]$';               -> 0
          mysql> SELECT 'aXbc' REGEXP '^[a-dXYZ]+$';              -> 1
          mysql> SELECT 'aXbc' REGEXP '^[^a-dXYZ]+$';             -> 0
          mysql> SELECT 'gheis' REGEXP '^[^a-dXYZ]+$';            -> 1
          mysql> SELECT 'gheisa' REGEXP '^[^a-dXYZ]+$';           -> 0

   * `[.characters.]'

     Within a bracket expression (written using `[' and `]'), matches
     the sequence of characters of that collating element.
     `characters' is either a single character or a character name like
     `newline'. The following table lists the permissible character
     names.

     The following table shows the permissible character names and the
     characters that they match. For characters given as numeric
     values, the values are represented in octal.

     This table shows permissible character names and matching
     characters. To save space, the column pairing of Name and
     Character are presented in a four column table format in this
     order: Name, Character, Name, Character.  For characters given as
     numeric values, the values are represented in octal.

     Name              Character         Name              Character
     `NUL'             `0'               `SOH'             `001'
     `STX'             `002'             `ETX'             `003'
     `EOT'             `004'             `ENQ'             `005'
     `ACK'             `006'             `BEL'             `007'
     `alert'           `007'             `BS'              `010'
     `backspace'       `'\b''            `HT'              `011'
     `tab'             `'\t''            `LF'              `012'
     `newline'         `'\n''            `VT'              `013'
     `vertical-tab'    `'\v''            `FF'              `014'
     `form-feed'       `'\f''            `CR'              `015'
     `carriage-return' `'\r''            `SO'              `016'
     `SI'              `017'             `DLE'             `020'
     `DC1'             `021'             `DC2'             `022'
     `DC3'             `023'             `DC4'             `024'
     `NAK'             `025'             `SYN'             `026'
     `ETB'             `027'             `CAN'             `030'
     `EM'              `031'             `SUB'             `032'
     `ESC'             `033'             `IS4'             `034'
     `FS'              `034'             `IS3'             `035'
     `GS'              `035'             `IS2'             `036'
     `RS'              `036'             `IS1'             `037'
     `US'              `037'             `space'           `' ''
     `exclamation-mark'`'!''             `quotation-mark'  `'"''
     `number-sign'     `'#''             `dollar-sign'     `'$''
     `percent-sign'    `'%''             `ampersand'       `'&''
     `apostrophe'      `'\'''            `left-parenthesis'`'(''
     `right-parenthesis'`')''             `asterisk'        `'*''
     `plus-sign'       `'+''             `comma'           `',''
     `hyphen'          `'-''             `hyphen-minus'    `'-''
     `period'          `'.''             `full-stop'       `'.''
     `slash'           `'/''             `solidus'         `'/''
     `zero'            `'0''             `one'             `'1''
     `two'             `'2''             `three'           `'3''
     `four'            `'4''             `five'            `'5''
     `six'             `'6''             `seven'           `'7''
     `eight'           `'8''             `nine'            `'9''
     `colon'           `':''             `semicolon'       `';''
     `less-than-sign'  `'<''             `equals-sign'     `'=''
     `greater-than-sign'`'>''             `question-mark'   `'?''
     `commercial-at'   `'@''             `left-square-bracket'`'[''
     `backslash'       `'\\''            `reverse-solidus' `'\\''
     `right-square-bracket'`']''             `circumflex'      `'^''
     `circumflex-accent'`'^''             `underscore'      `'_''
     `low-line'        `'_''             `grave-accent'    `'`''
     `left-brace'      `'{''             `left-curly-bracket'`'{''
     `vertical-line'   `'|''             `right-brace'     `'}''
     `right-curly-bracket'`'}''             `tilde'           `'~''
     `DEL'             `177'                               

          mysql> SELECT '~' REGEXP '[[.~.]]';                     -> 1
          mysql> SELECT '~' REGEXP '[[.tilde.]]';                 -> 1

   * `[=character_class=]'

     Within a bracket expression (written using `[' and `]'),
     `[=character_class=]' represents an equivalence class. It matches
     all characters with the same collation value, including itself.
     For example, if `o' and `(+)' are the members of an equivalence
     class, `[[=o=]]', `[[=(+)=]]', and `[o(+)]' are all synonymous. An
     equivalence class may not be used as an endpoint of a range.

   * `[:character_class:]'

     Within a bracket expression (written using `[' and `]'),
     `[:character_class:]' represents a character class that matches
     all characters belonging to that class. The following table lists
     the standard class names. These names stand for the character
     classes defined in the `ctype(3)' manual page. A particular locale
     may provide other class names. A character class may not be used
     as an endpoint of a range.

     This table lists character class names and describes the meaning
     of each.

     Character     Meaning
     Class Name    
     `alnum'       Alphanumeric characters
     `alpha'       Alphabetic characters
     `blank'       Whitespace characters
     `cntrl'       Control characters
     `digit'       Digit characters
     `graph'       Graphic characters
     `lower'       Lowercase alphabetic characters
     `print'       Graphic or space characters
     `punct'       Punctuation characters
     `space'       Space, tab, newline, and carriage return
     `upper'       Uppercase alphabetic characters
     `xdigit'      Hexadecimal digit characters

          mysql> SELECT 'justalnums' REGEXP '[[:alnum:]]+';       -> 1
          mysql> SELECT '!!' REGEXP '[[:alnum:]]+';               -> 0

   * `[[:<:]]', `[[:>:]]'

     These markers stand for word boundaries. They match the beginning
     and end of words, respectively. A word is a sequence of word
     characters that is not preceded by or followed by word characters.
     A word character is an alphanumeric character in the `alnum' class
     or an underscore (`_').

          mysql> SELECT 'a word a' REGEXP '[[:<:]]word[[:>:]]';   -> 1
          mysql> SELECT 'a xword a' REGEXP '[[:<:]]word[[:>:]]';  -> 0

To use a literal instance of a special character in a regular
expression, precede it by two backslash (\) characters. The MySQL
parser interprets one of the backslashes, and the regular expression
library interprets the other. For example, to match the string `1+2'
that contains the special `+' character, only the last of the following
regular expressions is the correct one:

     mysql> SELECT '1+2' REGEXP '1+2';                       -> 0
     mysql> SELECT '1+2' REGEXP '1\+2';                      -> 0
     mysql> SELECT '1+2' REGEXP '1\\+2';                     -> 1


File: manual.info,  Node: numeric-functions,  Next: date-and-time-functions,  Prev: string-functions,  Up: functions

12.6 Numeric Functions and Operators
====================================

* Menu:

* arithmetic-functions::         Arithmetic Operators
* mathematical-functions::       Mathematical Functions

*Numeric Functions and Operators*

Name                          Description
`ABS()'                       Return the absolute value
`ACOS()'                      Return the arc cosine
`ASIN()'                      Return the arc sine
`ATAN2()', `ATAN()'           Return the arc tangent of the two arguments
`ATAN()'                      Return the arc tangent
`CEIL()'                      Return the smallest integer value not less
                              than  the argument
`CEILING()'                   Return the smallest integer value not less
                              than  the argument
`CONV()'                      Convert numbers between different number
                              bases
`COS()'                       Return the cosine
`COT()'                       Return the cotangent
`CRC32()'                     Compute a cyclic redundancy check value
`DEGREES()'                   Convert radians to degrees
`DIV'                         Integer division
`/'                           Division operator
`EXP()'                       Raise to the power of
`FLOOR()'                     Return the largest integer value not
                              greater than  the argument
`LN()'                        Return the natural logarithm of the
                              argument
`LOG10()'                     Return the base-10 logarithm of the
                              argument
`LOG2()'                      Return the base-2 logarithm of the argument
`LOG()'                       Return the natural logarithm of the first
                              argument
`-'                           Minus operator
`MOD()'                       Return the remainder
`% or MOD'                    Modulo operator
`PI()'                        Return the value of pi
`+'                           Addition operator
`POW()'                       Return the argument raised to the
                              specified power
`POWER()'                     Return the argument raised to the
                              specified power
`RADIANS()'                   Return argument converted to radians
`RAND()'                      Return a random floating-point value
`ROUND()'                     Round the argument
`SIGN()'                      Return the sign of the argument
`SIN()'                       Return the sine of the argument
`SQRT()'                      Return the square root of the argument
`TAN()'                       Return the tangent of the argument
`*'                           Multiplication operator
`TRUNCATE()'                  Truncate to specified number of decimal
                              places
`-'                           Change the sign of the argument


File: manual.info,  Node: arithmetic-functions,  Next: mathematical-functions,  Prev: numeric-functions,  Up: numeric-functions

12.6.1 Arithmetic Operators
---------------------------

*Arithmetic Operators*

Name                          Description
`DIV'                         Integer division
`/'                           Division operator
`-'                           Minus operator
`% or MOD'                    Modulo operator
`+'                           Addition operator
`*'                           Multiplication operator
`-'                           Change the sign of the argument

The usual arithmetic operators are available. The result is determined
according to the following rules:

   * In the case of `-', `+', and `*', the result is calculated with
     *Note `BIGINT': integer-types.  (64-bit) precision if both
     operands are integers.

   * If both operands are integers and any of them are unsigned, the
     result is an unsigned integer. For subtraction, if the
     `NO_UNSIGNED_SUBTRACTION' SQL mode is enabled, the result is
     signed even if any operand is unsigned.

   * If any of the operands of a `+', `-', `/', `*', `%' is a real or
     string value, the precision of the result is the precision of the
     operand with the maximum precision.

   * In division performed with `/', the scale of the result when using
     two exact-value operands is the scale of the first operand plus
     the value of the `div_precision_increment' system variable (which
     is 4 by default). For example, the result of the expression `5.05
     / 0.014' has a scale of six decimal places (`360.714286').

These rules are applied for each operation, such that nested
calculations imply the precision of each component. Hence, `(14620 /
9432456) / (24250 / 9432456)', resolves first to `(0.0014) / (0.0026)',
with the final result having 8 decimal places (`0.60288653').

Because of these rules and the way they are applied, care should be
taken to ensure that components and subcomponents of a calculation use
the appropriate level of precision. See *Note cast-functions::.

For information about handling of overflow in numeric expression
evaluation, see *Note out-of-range-and-overflow::.

Arithmetic operators apply to numbers. For other types of values,
alternative operations may be available. For example, to add date
values, use `DATE_ADD()'; see *Note date-and-time-functions::.

   *  `+'

     Addition:

          mysql> SELECT 3+5;
                  -> 8

   *  `-'

     Subtraction:

          mysql> SELECT 3-5;
                  -> -2

   *  `-'

     Unary minus. This operator changes the sign of the operand.

          mysql> SELECT - 2;
                  -> -2

     *Note*:

     If this operator is used with a *Note `BIGINT': integer-types, the
     return value is also a *Note `BIGINT': integer-types. This means
     that you should avoid using `-' on integers that may have the
     value of -2^63.

   *  `*'

     Multiplication:

          mysql> SELECT 3*5;
                  -> 15
          mysql> SELECT 18014398509481984*18014398509481984.0;
                  -> 324518553658426726783156020576256.0
          mysql> SELECT 18014398509481984*18014398509481984;
                  -> out-of-range error

     The last expression produces an error because the result of the
     integer multiplication exceeds the 64-bit range of *Note `BIGINT':
     integer-types. calculations. (See *Note numeric-types::.)

   *  `/'

     Division:

          mysql> SELECT 3/5;
                  -> 0.60

     Division by zero produces a `NULL' result:

          mysql> SELECT 102/(1-1);
                  -> NULL

     A division is calculated with *Note `BIGINT': integer-types.
     arithmetic only if performed in a context where its result is
     converted to an integer.

   *  `DIV'

     Integer division. Similar to `FLOOR()', but is safe with *Note
     `BIGINT': integer-types. values.

     As of MySQL 5.5.3, if either operand has a noninteger type, the
     operands are converted to *Note `DECIMAL': fixed-point-types. and
     divided using *Note `DECIMAL': fixed-point-types. arithmetic before
     converting the result to *Note `BIGINT': integer-types. If the
     result exceeds `BIGINT' range, an error occurs. Before MySQL
     5.5.3, incorrect results may occur for noninteger operands that
     exceed *Note `BIGINT': integer-types.  range.

          mysql> SELECT 5 DIV 2;
                  -> 2

   *  `N % M', `N MOD M'

     Modulo operation. Returns the remainder of N divided by M. For
     more information, see the description for the `MOD()' function in
     *Note mathematical-functions::.


File: manual.info,  Node: mathematical-functions,  Prev: arithmetic-functions,  Up: numeric-functions

12.6.2 Mathematical Functions
-----------------------------

*Mathematical Functions*

Name                          Description
`ABS()'                       Return the absolute value
`ACOS()'                      Return the arc cosine
`ASIN()'                      Return the arc sine
`ATAN2()', `ATAN()'           Return the arc tangent of the two arguments
`ATAN()'                      Return the arc tangent
`CEIL()'                      Return the smallest integer value not less
                              than  the argument
`CEILING()'                   Return the smallest integer value not less
                              than  the argument
`CONV()'                      Convert numbers between different number
                              bases
`COS()'                       Return the cosine
`COT()'                       Return the cotangent
`CRC32()'                     Compute a cyclic redundancy check value
`DEGREES()'                   Convert radians to degrees
`EXP()'                       Raise to the power of
`FLOOR()'                     Return the largest integer value not
                              greater than  the argument
`LN()'                        Return the natural logarithm of the
                              argument
`LOG10()'                     Return the base-10 logarithm of the
                              argument
`LOG2()'                      Return the base-2 logarithm of the argument
`LOG()'                       Return the natural logarithm of the first
                              argument
`MOD()'                       Return the remainder
`PI()'                        Return the value of pi
`POW()'                       Return the argument raised to the
                              specified power
`POWER()'                     Return the argument raised to the
                              specified power
`RADIANS()'                   Return argument converted to radians
`RAND()'                      Return a random floating-point value
`ROUND()'                     Round the argument
`SIGN()'                      Return the sign of the argument
`SIN()'                       Return the sine of the argument
`SQRT()'                      Return the square root of the argument
`TAN()'                       Return the tangent of the argument
`TRUNCATE()'                  Truncate to specified number of decimal
                              places

All mathematical functions return `NULL' in the event of an error.

   *  `ABS(X)'

     Returns the absolute value of X.

          mysql> SELECT ABS(2);
                  -> 2
          mysql> SELECT ABS(-32);
                  -> 32

     This function is safe to use with *Note `BIGINT': integer-types.
     values.

   *  `ACOS(X)'

     Returns the arc cosine of X, that is, the value whose cosine is X.
     Returns `NULL' if X is not in the range `-1' to `1'.

          mysql> SELECT ACOS(1);
                  -> 0
          mysql> SELECT ACOS(1.0001);
                  -> NULL
          mysql> SELECT ACOS(0);
                  -> 1.5707963267949

   *  `ASIN(X)'

     Returns the arc sine of X, that is, the value whose sine is X.
     Returns `NULL' if X is not in the range `-1' to `1'.

          mysql> SELECT ASIN(0.2);
                  -> 0.20135792079033
          mysql> SELECT ASIN('foo');

          +-------------+
          | ASIN('foo') |
          +-------------+
          |           0 |
          +-------------+
          1 row in set, 1 warning (0.00 sec)

          mysql> SHOW WARNINGS;
          +---------+------+-----------------------------------------+
          | Level   | Code | Message                                 |
          +---------+------+-----------------------------------------+
          | Warning | 1292 | Truncated incorrect DOUBLE value: 'foo' |
          +---------+------+-----------------------------------------+

   *  `ATAN(X)'

     Returns the arc tangent of X, that is, the value whose tangent is
     X.

          mysql> SELECT ATAN(2);
                  -> 1.1071487177941
          mysql> SELECT ATAN(-2);
                  -> -1.1071487177941

   *  `ATAN(Y,X)', `ATAN2(Y,X)'

     Returns the arc tangent of the two variables X and Y. It is
     similar to calculating the arc tangent of `Y / X', except that the
     signs of both arguments are used to determine the quadrant of the
     result.

          mysql> SELECT ATAN(-2,2);
                  -> -0.78539816339745
          mysql> SELECT ATAN2(PI(),0);
                  -> 1.5707963267949

   *  `CEIL(X)'

     `CEIL()' is a synonym for `CEILING()'.

   *  `CEILING(X)'

     Returns the smallest integer value not less than X.

          mysql> SELECT CEILING(1.23);
                  -> 2
          mysql> SELECT CEILING(-1.23);
                  -> -1

     For exact-value numeric arguments, the return value has an
     exact-value numeric type. For string or floating-point arguments,
     the return value has a floating-point type.

   *  `CONV(N,FROM_BASE,TO_BASE)'

     Converts numbers between different number bases. Returns a string
     representation of the number N, converted from base FROM_BASE to
     base TO_BASE. Returns `NULL' if any argument is `NULL'. The
     argument N is interpreted as an integer, but may be specified as
     an integer or a string. The minimum base is `2' and the maximum
     base is `36'. If TO_BASE is a negative number, N is regarded as a
     signed number. Otherwise, N is treated as unsigned.  `CONV()'
     works with 64-bit precision.

          mysql> SELECT CONV('a',16,2);
                  -> '1010'
          mysql> SELECT CONV('6E',18,8);
                  -> '172'
          mysql> SELECT CONV(-17,10,-18);
                  -> '-H'
          mysql> SELECT CONV(10+'10'+'10'+0xa,10,10);
                  -> '40'

   *  `COS(X)'

     Returns the cosine of X, where X is given in radians.

          mysql> SELECT COS(PI());
                  -> -1

   *  `COT(X)'

     Returns the cotangent of X.

          mysql> SELECT COT(12);
                  -> -1.5726734063977
          mysql> SELECT COT(0);
                  -> NULL

   *  `CRC32(EXPR)'

     Computes a cyclic redundancy check value and returns a 32-bit
     unsigned value. The result is `NULL' if the argument is `NULL'.
     The argument is expected to be a string and (if possible) is
     treated as one if it is not.

          mysql> SELECT CRC32('MySQL');
                  -> 3259397556
          mysql> SELECT CRC32('mysql');
                  -> 2501908538

   *  `DEGREES(X)'

     Returns the argument X, converted from radians to degrees.

          mysql> SELECT DEGREES(PI());
                  -> 180
          mysql> SELECT DEGREES(PI() / 2);
                  -> 90

   *  `EXP(X)'

     Returns the value of _e_ (the base of natural logarithms) raised
     to the power of X. The inverse of this function is `LOG()' (using
     a single argument only) or `LN()'.

          mysql> SELECT EXP(2);
                  -> 7.3890560989307
          mysql> SELECT EXP(-2);
                  -> 0.13533528323661
          mysql> SELECT EXP(0);
                  -> 1

   *  `FLOOR(X)'

     Returns the largest integer value not greater than X.

          mysql> SELECT FLOOR(1.23);
                  -> 1
          mysql> SELECT FLOOR(-1.23);
                  -> -2

     For exact-value numeric arguments, the return value has an
     exact-value numeric type. For string or floating-point arguments,
     the return value has a floating-point type.

   * `FORMAT(X,D)'

     Formats the number X to a format like `'#,###,###.##'', rounded to
     D decimal places, and returns the result as a string. For details,
     see *Note string-functions::.

   * `HEX(N_or_S)'

     This function can be used to obtain a hexadecimal representation
     of a decimal number or a string; the manner in which it does so
     varies according to the argument's type. See this function's
     description in *Note string-functions::, for details.

   *  `LN(X)'

     Returns the natural logarithm of X; that is, the base-_e_
     logarithm of X. If X is less than or equal to 0, then `NULL' is
     returned.

          mysql> SELECT LN(2);
                  -> 0.69314718055995
          mysql> SELECT LN(-2);
                  -> NULL

     This function is synonymous with `LOG(X)'.  The inverse of this
     function is the `EXP()' function.

   *  `LOG(X)', `LOG(B,X)'

     If called with one parameter, this function returns the natural
     logarithm of X. If X is less than or equal to 0, then `NULL' is
     returned.

     The inverse of this function (when called with a single argument)
     is the `EXP()' function.

          mysql> SELECT LOG(2);
                  -> 0.69314718055995
          mysql> SELECT LOG(-2);
                  -> NULL

     If called with two parameters, this function returns the logarithm
     of X to the base B. If X is less than or equal to 0, or if B is
     less than or equal to 1, then `NULL' is returned.

          mysql> SELECT LOG(2,65536);
                  -> 16
          mysql> SELECT LOG(10,100);
                  -> 2
          mysql> SELECT LOG(1,100);
                  -> NULL

     `LOG(B,X)' is equivalent to `LOG(X) / LOG(B)'.

   *  `LOG2(X)'

     Returns the base-2 logarithm of `X'.

          mysql> SELECT LOG2(65536);
                  -> 16
          mysql> SELECT LOG2(-100);
                  -> NULL

     `LOG2()' is useful for finding out how many bits a number requires
     for storage. This function is equivalent to the expression `LOG(X)
     / LOG(2)'.

   *  `LOG10(X)'

     Returns the base-10 logarithm of X.

          mysql> SELECT LOG10(2);
                  -> 0.30102999566398
          mysql> SELECT LOG10(100);
                  -> 2
          mysql> SELECT LOG10(-100);
                  -> NULL

     `LOG10(X)' is equivalent to `LOG(10,X)'.

   *  `MOD(N,M)', `N % M', `N MOD M'

     Modulo operation. Returns the remainder of N divided by M.

          mysql> SELECT MOD(234, 10);
                  -> 4
          mysql> SELECT 253 % 7;
                  -> 1
          mysql> SELECT MOD(29,9);
                  -> 2
          mysql> SELECT 29 MOD 9;
                  -> 2

     This function is safe to use with *Note `BIGINT': integer-types.
     values.

     `MOD()' also works on values that have a fractional part and
     returns the exact remainder after division:

          mysql> SELECT MOD(34.5,3);
                  -> 1.5

     `MOD(N,0)' returns `NULL'.

   *  `PI()'

     Returns the value of π (pi). The default number of decimal places
     displayed is seven, but MySQL uses the full double-precision value
     internally.

          mysql> SELECT PI();
                  -> 3.141593
          mysql> SELECT PI()+0.000000000000000000;
                  -> 3.141592653589793116

   *  `POW(X,Y)'

     Returns the value of X raised to the power of Y.

          mysql> SELECT POW(2,2);
                  -> 4
          mysql> SELECT POW(2,-2);
                  -> 0.25

   *  `POWER(X,Y)'

     This is a synonym for `POW()'.

   *  `RADIANS(X)'

     Returns the argument X, converted from degrees to radians. (Note
     that π radians equals 180 degrees.)

          mysql> SELECT RADIANS(90);
                  -> 1.5707963267949

   *  `RAND()', `RAND(N)'

     Returns a random floating-point value V in the range `0' <= V <
     `1.0'. If a constant integer argument N is specified, it is used
     as the seed value, which produces a repeatable sequence of column
     values. In the following example, note that the sequences of
     values produced by `RAND(3)' is the same both places where it
     occurs.


          mysql> CREATE TABLE t (i INT);
          Query OK, 0 rows affected (0.42 sec)

          mysql> INSERT INTO t VALUES(1),(2),(3);
          Query OK, 3 rows affected (0.00 sec)
          Records: 3  Duplicates: 0  Warnings: 0

          mysql> SELECT i, RAND() FROM t;
          +------+------------------+
          | i    | RAND()           |
          +------+------------------+
          |    1 | 0.61914388706828 |
          |    2 | 0.93845168309142 |
          |    3 | 0.83482678498591 |
          +------+------------------+
          3 rows in set (0.00 sec)

          mysql> SELECT i, RAND(3) FROM t;
          +------+------------------+
          | i    | RAND(3)          |
          +------+------------------+
          |    1 | 0.90576975597606 |
          |    2 | 0.37307905813035 |
          |    3 | 0.14808605345719 |
          +------+------------------+
          3 rows in set (0.00 sec)

          mysql> SELECT i, RAND() FROM t;
          +------+------------------+
          | i    | RAND()           |
          +------+------------------+
          |    1 | 0.35877890638893 |
          |    2 | 0.28941420772058 |
          |    3 | 0.37073435016976 |
          +------+------------------+
          3 rows in set (0.00 sec)

          mysql> SELECT i, RAND(3) FROM t;
          +------+------------------+
          | i    | RAND(3)          |
          +------+------------------+
          |    1 | 0.90576975597606 |
          |    2 | 0.37307905813035 |
          |    3 | 0.14808605345719 |
          +------+------------------+
          3 rows in set (0.01 sec)

     With a constant initializer, the seed is initialized once when the
     statement is compiled, prior to execution. If a nonconstant
     initializer (such as a column name) is used as the argument, the
     seed is initialized with the value for each invocation of `RAND()'.
     (One implication of this is that for equal argument values,
     `RAND()' will return the same value each time.)

     To obtain a random integer R in the range I <= R < J, use the
     expression `FLOOR(I + RAND() * (J' - `I))'.  For example, to
     obtain a random integer in the range the range `7' <= R < `12', you
     could use the following statement:

          SELECT FLOOR(7 + (RAND() * 5));

     `RAND()' in a `WHERE' clause is re-evaluated every time the
     `WHERE' is executed.

     You cannot use a column with `RAND()' values in an `ORDER BY'
     clause, because `ORDER BY' would evaluate the column multiple
     times.  However, you can retrieve rows in random order like this:

          mysql> SELECT * FROM TBL_NAME ORDER BY RAND();

     `ORDER BY RAND()' combined with `LIMIT' is useful for selecting a
     random sample from a set of rows:

          mysql> SELECT * FROM table1, table2 WHERE a=b AND c<d -> ORDER BY RAND() LIMIT 1000;

     `RAND()' is not meant to be a perfect random generator. It is a
     fast way to generate random numbers on demand that is portable
     between platforms for the same MySQL version.

     This function is unsafe for statement-based replication.
     Beginning with MySQL 5.5.2, a warning is logged if you use this
     function when `binlog_format' is set to `STATEMENT'. (Bug #49222)

   *  `ROUND(X)', `ROUND(X,D)'

     Rounds the argument X to D decimal places. The rounding algorithm
     depends on the data type of X. D defaults to 0 if not specified. D
     can be negative to cause D digits left of the decimal point of the
     value X to become zero.

          mysql> SELECT ROUND(-1.23);
                  -> -1
          mysql> SELECT ROUND(-1.58);
                  -> -2
          mysql> SELECT ROUND(1.58);
                  -> 2
          mysql> SELECT ROUND(1.298, 1);
                  -> 1.3
          mysql> SELECT ROUND(1.298, 0);
                  -> 1
          mysql> SELECT ROUND(23.298, -1);
                  -> 20

     The return type is the same type as that of the first argument
     (assuming that it is integer, double, or decimal).  This means
     that for an integer argument, the result is an integer (no decimal
     places):

          mysql> SELECT ROUND(150.000,2), ROUND(150,2);
          +------------------+--------------+
          | ROUND(150.000,2) | ROUND(150,2) |
          +------------------+--------------+
          |           150.00 |          150 |
          +------------------+--------------+

     `ROUND()' uses the following rules depending on the type of the
     first argument:

        * For exact-value numbers, `ROUND()' uses the `round half away
          from zero' or `round toward nearest' rule: A value with a
          fractional part of .5 or greater is rounded up to the next
          integer if positive or down to the next integer if negative.
          (In other words, it is rounded away from zero.) A value with
          a fractional part less than .5 is rounded down to the next
          integer if positive or up to the next integer if negative.

        * For approximate-value numbers, the result depends on the C
          library. On many systems, this means that `ROUND()' uses the
          "round to nearest even" rule: A value with any fractional part
          is rounded to the nearest even integer.

     The following example shows how rounding differs for exact and
     approximate values:

          mysql> SELECT ROUND(2.5), ROUND(25E-1);
          +------------+--------------+
          | ROUND(2.5) | ROUND(25E-1) |
          +------------+--------------+
          | 3          |            2 |
          +------------+--------------+

     For more information, see *Note precision-math::.

   *  `SIGN(X)'

     Returns the sign of the argument as `-1', `0', or `1', depending on
     whether X is negative, zero, or positive.

          mysql> SELECT SIGN(-32);
                  -> -1
          mysql> SELECT SIGN(0);
                  -> 0
          mysql> SELECT SIGN(234);
                  -> 1

   *  `SIN(X)'

     Returns the sine of X, where X is given in radians.

          mysql> SELECT SIN(PI());
                  -> 1.2246063538224e-16
          mysql> SELECT ROUND(SIN(PI()));
                  -> 0

   *  `SQRT(X)'

     Returns the square root of a nonnegative number X.

          mysql> SELECT SQRT(4);
                  -> 2
          mysql> SELECT SQRT(20);
                  -> 4.4721359549996
          mysql> SELECT SQRT(-16);
                  -> NULL

   *  `TAN(X)'

     Returns the tangent of X, where X is given in radians.

          mysql> SELECT TAN(PI());
                  -> -1.2246063538224e-16
          mysql> SELECT TAN(PI()+1);
                  -> 1.5574077246549

   *  `TRUNCATE(X,D)'

     Returns the number X, truncated to D decimal places. If D is `0',
     the result has no decimal point or fractional part.  D can be
     negative to cause D digits left of the decimal point of the value
     X to become zero.

          mysql> SELECT TRUNCATE(1.223,1);
                  -> 1.2
          mysql> SELECT TRUNCATE(1.999,1);
                  -> 1.9
          mysql> SELECT TRUNCATE(1.999,0);
                  -> 1
          mysql> SELECT TRUNCATE(-1.999,1);
                  -> -1.9
          mysql> SELECT TRUNCATE(122,-2);
                 -> 100
          mysql> SELECT TRUNCATE(10.28*100,0);
                 -> 1028

     All numbers are rounded toward zero.


File: manual.info,  Node: date-and-time-functions,  Next: mysql-calendar,  Prev: numeric-functions,  Up: functions

12.7 Date and Time Functions
============================

This section describes the functions that can be used to manipulate
temporal values. See *Note date-and-time-types::, for a description of
the range of values each date and time type has and the valid formats
in which values may be specified.

*Date/Time Functions*

Name                          Description
`ADDDATE()'                   Add time values (intervals) to a date value
`ADDTIME()'                   Add time
`CONVERT_TZ()'                Convert from one timezone to another
`CURDATE()'                   Return the current date
`CURRENT_DATE()',             Synonyms for CURDATE()
`CURRENT_DATE'                
`CURRENT_TIME()',             Synonyms for CURTIME()
`CURRENT_TIME'                
`CURRENT_TIMESTAMP()',        Synonyms for NOW()
`CURRENT_TIMESTAMP'           
`CURTIME()'                   Return the current time
`DATE_ADD()'                  Add time values (intervals) to a date value
`DATE_FORMAT()'               Format date as specified
`DATE_SUB()'                  Subtract a time value (interval) from a
                              date
`DATE()'                      Extract the date part of a date or
                              datetime expression
`DATEDIFF()'                  Subtract two dates
`DAY()'                       Synonym for DAYOFMONTH()
`DAYNAME()'                   Return the name of the weekday
`DAYOFMONTH()'                Return the day of the month (0-31)
`DAYOFWEEK()'                 Return the weekday index of the argument
`DAYOFYEAR()'                 Return the day of the year (1-366)
`EXTRACT()'                   Extract part of a date
`FROM_DAYS()'                 Convert a day number to a date
`FROM_UNIXTIME()'             Format UNIX timestamp as a date
`GET_FORMAT()'                Return a date format string
`HOUR()'                      Extract the hour
`LAST_DAY'                    Return the last day of the month for the
                              argument
`LOCALTIME()', `LOCALTIME'    Synonym for NOW()
`LOCALTIMESTAMP',             Synonym for NOW()
`LOCALTIMESTAMP()'            
`MAKEDATE()'                  Create a date from the year and day of year
`MAKETIME'                    MAKETIME()
`MICROSECOND()'               Return the microseconds from argument
`MINUTE()'                    Return the minute from the argument
`MONTH()'                     Return the month from the date passed
`MONTHNAME()'                 Return the name of the month
`NOW()'                       Return the current date and time
`PERIOD_ADD()'                Add a period to a year-month
`PERIOD_DIFF()'               Return the number of months between periods
`QUARTER()'                   Return the quarter from a date argument
`SEC_TO_TIME()'               Converts seconds to 'HH:MM:SS' format
`SECOND()'                    Return the second (0-59)
`STR_TO_DATE()'               Convert a string to a date
`SUBDATE()'                   A synonym for DATE_SUB() when invoked with
                              three arguments
`SUBTIME()'                   Subtract times
`SYSDATE()'                   Return the time at which the function
                              executes
`TIME_FORMAT()'               Format as time
`TIME_TO_SEC()'               Return the argument converted to seconds
`TIME()'                      Extract the time portion of the expression
                              passed
`TIMEDIFF()'                  Subtract time
`TIMESTAMP()'                 With a single argument, this function
                              returns the date or  datetime expression;
                              with two arguments, the sum of the
                              arguments
`TIMESTAMPADD()'              Add an interval to a datetime expression
`TIMESTAMPDIFF()'             Subtract an interval from a datetime
                              expression
`TO_DAYS()'                   Return the date argument converted to days
`TO_SECONDS()'                Return the date or datetime argument
                              converted to seconds since  Year 0
`UNIX_TIMESTAMP()'            Return a UNIX timestamp
`UTC_DATE()'                  Return the current UTC date
`UTC_TIME()'                  Return the current UTC time
`UTC_TIMESTAMP()'             Return the current UTC date and time
`WEEK()'                      Return the week number
`WEEKDAY()'                   Return the weekday index
`WEEKOFYEAR()'                Return the calendar week of the date (0-53)
`YEAR()'                      Return the year
`YEARWEEK()'                  Return the year and week

Here is an example that uses date functions. The following query
selects all rows with a DATE_COL value from within the last 30 days:

     mysql> SELECT SOMETHING FROM TBL_NAME
         -> WHERE DATE_SUB(CURDATE(),INTERVAL 30 DAY) <= DATE_COL;

The query also selects rows with dates that lie in the future.

Functions that expect date values usually accept datetime values and
ignore the time part. Functions that expect time values usually accept
datetime values and ignore the date part.

Functions that return the current date or time each are evaluated only
once per query at the start of query execution. This means that
multiple references to a function such as `NOW()' within a single query
always produce the same result. (For our purposes, a single query also
includes a call to a stored program (stored routine, trigger, or event)
and all subprograms called by that program.) This principle also
applies to `CURDATE()', `CURTIME()', `UTC_DATE()', `UTC_TIME()',
`UTC_TIMESTAMP()', and to any of their synonyms.

The `CURRENT_TIMESTAMP()', `CURRENT_TIME()', `CURRENT_DATE()', and
`FROM_UNIXTIME()' functions return values in the connection's current
time zone, which is available as the value of the `time_zone' system
variable. In addition, `UNIX_TIMESTAMP()' assumes that its argument is
a datetime value in the current time zone. See *Note
time-zone-support::.

Some date functions can be used with `zero' dates or incomplete dates
such as `'2001-11-00'', whereas others cannot. Functions that extract
parts of dates typically work with incomplete dates and thus can return
0 when you might otherwise expect a nonzero value. For example:

     mysql> SELECT DAYOFMONTH('2001-11-00'), MONTH('2005-00-00');
             -> 0, 0

Other functions expect complete dates and return `NULL' for incomplete
dates. These include functions that perform date arithmetic or that map
parts of dates to names. For example:

     mysql> SELECT DATE_ADD('2006-05-00',INTERVAL 1 DAY);
             -> NULL
     mysql> SELECT DAYNAME('2006-05-00');
             -> NULL

*Note*:

From MySQL 5.5.16 to 5.5.20, a change in handling of a date-related
assertion caused several functions to become more strict when passed a
`DATE()' function value as their argument and reject incomplete dates
with a day part of zero. These functions are affected: `CONVERT_TZ()',
`DATE_ADD()', `DATE_SUB()', `DAYOFYEAR()', `LAST_DAY()',
`TIMESTAMPDIFF()', `TO_DAYS()', `TO_SECONDS()', `WEEK()', `WEEKDAY()',
`WEEKOFYEAR()', `YEARWEEK()'. Because this changes date-handling
behavior in General Availability-status series MySQL 5.5, the change
was reverted in 5.5.21.

   *  `ADDDATE(DATE,INTERVAL EXPR UNIT)', `ADDDATE(EXPR,DAYS)'

     When invoked with the `INTERVAL' form of the second argument,
     `ADDDATE()' is a synonym for `DATE_ADD()'. The related function
     `SUBDATE()' is a synonym for `DATE_SUB()'. For information on the
     `INTERVAL' UNIT argument, see the discussion for `DATE_ADD()'.

          mysql> SELECT DATE_ADD('2008-01-02', INTERVAL 31 DAY);
                  -> '2008-02-02'
          mysql> SELECT ADDDATE('2008-01-02', INTERVAL 31 DAY);
                  -> '2008-02-02'

     When invoked with the DAYS form of the second argument, MySQL
     treats it as an integer number of days to be added to EXPR.

          mysql> SELECT ADDDATE('2008-01-02', 31);
                  -> '2008-02-02'

   *  `ADDTIME(EXPR1,EXPR2)'

     `ADDTIME()' adds EXPR2 to EXPR1 and returns the result.  EXPR1 is
     a time or datetime expression, and EXPR2 is a time expression.

          mysql> SELECT ADDTIME('2007-12-31 23:59:59.999999', '1 1:1:1.000002');
                  -> '2008-01-02 01:01:01.000001'
          mysql> SELECT ADDTIME('01:00:00.999999', '02:00:00.999998');
                  -> '03:00:01.999997'

   *  `CONVERT_TZ(DT,FROM_TZ,TO_TZ)'

     `CONVERT_TZ()' converts a datetime value DT from the time zone
     given by FROM_TZ to the time zone given by TO_TZ and returns the
     resulting value. Time zones are specified as described in *Note
     time-zone-support::. This function returns `NULL' if the arguments
     are invalid.

     If the value falls out of the supported range of the *Note
     `TIMESTAMP': datetime. type when converted from FROM_TZ to UTC, no
     conversion occurs. The *Note `TIMESTAMP': datetime. range is
     described in *Note date-and-time-type-overview::.

          mysql> SELECT CONVERT_TZ('2004-01-01 12:00:00','GMT','MET');
                  -> '2004-01-01 13:00:00'
          mysql> SELECT CONVERT_TZ('2004-01-01 12:00:00','+00:00','+10:00');
                  -> '2004-01-01 22:00:00'

     *Note*:

     To use named time zones such as `'MET'' or `'Europe/Moscow'', the
     time zone tables must be properly set up. See *Note
     time-zone-support::, for instructions.

   *  `CURDATE()'

     Returns the current date as a value in `'YYYY-MM-DD'' or `YYYYMMDD'
     format, depending on whether the function is used in a string or
     numeric context.

          mysql> SELECT CURDATE();
                  -> '2008-06-13'
          mysql> SELECT CURDATE() + 0;
                  -> 20080613

   *  `CURRENT_DATE', `CURRENT_DATE()'

     `CURRENT_DATE' and `CURRENT_DATE()' are synonyms for `CURDATE()'.

   *  `CURRENT_TIME', `CURRENT_TIME()'

     `CURRENT_TIME' and `CURRENT_TIME()' are synonyms for `CURTIME()'.

   *  `CURRENT_TIMESTAMP', `CURRENT_TIMESTAMP()'

     `CURRENT_TIMESTAMP' and `CURRENT_TIMESTAMP()' are synonyms for
     `NOW()'.

   *  `CURTIME()'

     Returns the current time as a value in `'HH:MM:SS'' or
     `HHMMSS.uuuuuu' format, depending on whether the function is used
     in a string or numeric context. The value is expressed in the
     current time zone.

          mysql> SELECT CURTIME();
                  -> '23:50:26'
          mysql> SELECT CURTIME() + 0;
                  -> 235026.000000

   *  `DATE(EXPR)'

     Extracts the date part of the date or datetime expression EXPR.

          mysql> SELECT DATE('2003-12-31 01:02:03');
                  -> '2003-12-31'

   *  `DATEDIFF(EXPR1,EXPR2)'

     `DATEDIFF()' returns EXPR1 - EXPR2 expressed as a value in days
     from one date to the other. EXPR1 and EXPR2 are date or
     date-and-time expressions. Only the date parts of the values are
     used in the calculation.

          mysql> SELECT DATEDIFF('2007-12-31 23:59:59','2007-12-30');
                  -> 1
          mysql> SELECT DATEDIFF('2010-11-30 23:59:59','2010-12-31');
                  -> -31

   *  `DATE_ADD(DATE,INTERVAL EXPR UNIT)', `DATE_SUB(DATE,INTERVAL EXPR
     UNIT)'

     These functions perform date arithmetic. The DATE argument
     specifies the starting date or datetime value.  EXPR is an
     expression specifying the interval value to be added or subtracted
     from the starting date. EXPR is a string; it may start with a
     ``-'' for negative intervals. UNIT is a keyword indicating the
     units in which the expression should be interpreted.

     The `INTERVAL' keyword and the UNIT specifier are not case
     sensitive.

     The following table shows the expected form of the EXPR argument
     for each UNIT value.

     This table lists UNIT values and the expected EXPR argument for
     each.

     UNIT Value                         Expected EXPR Format
     `MICROSECOND'                      `MICROSECONDS'
     `SECOND'                           `SECONDS'
     `MINUTE'                           `MINUTES'
     `HOUR'                             `HOURS'
     `DAY'                              `DAYS'
     `WEEK'                             `WEEKS'
     `MONTH'                            `MONTHS'
     `QUARTER'                          `QUARTERS'
     `YEAR'                             `YEARS'
     `SECOND_MICROSECOND'               `'SECONDS.MICROSECONDS''
     `MINUTE_MICROSECOND'               `'MINUTES:SECONDS.MICROSECONDS''
     `MINUTE_SECOND'                    `'MINUTES:SECONDS''
     `HOUR_MICROSECOND'                 `'HOURS:MINUTES:SECONDS.MICROSECONDS''
     `HOUR_SECOND'                      `'HOURS:MINUTES:SECONDS''
     `HOUR_MINUTE'                      `'HOURS:MINUTES''
     `DAY_MICROSECOND'                  `'DAYS
                                        HOURS:MINUTES:SECONDS.MICROSECONDS''
     `DAY_SECOND'                       `'DAYS HOURS:MINUTES:SECONDS''
     `DAY_MINUTE'                       `'DAYS HOURS:MINUTES''
     `DAY_HOUR'                         `'DAYS HOURS''
     `YEAR_MONTH'                       `'YEARS-MONTHS''

     The return value depends on the arguments:

        * *Note `DATETIME': datetime. if the first argument is a *Note
          `DATETIME': datetime. (or *Note `TIMESTAMP': datetime.)
          value, or if the first argument is a *Note `DATE': datetime.
          and the UNIT value uses `HOURS', `MINUTES', or `SECONDS'.

        * String otherwise.

     To ensure that the result is *Note `DATETIME': datetime, you can
     use `CAST()' to convert the first argument to *Note `DATETIME':
     datetime.

     MySQL permits any punctuation delimiter in the EXPR format. Those
     shown in the table are the suggested delimiters. If the DATE
     argument is a *Note `DATE': datetime. value and your calculations
     involve only `YEAR', `MONTH', and `DAY' parts (that is, no time
     parts), the result is a *Note `DATE': datetime. value. Otherwise,
     the result is a *Note `DATETIME': datetime. value.

     Date arithmetic also can be performed using `INTERVAL' together
     with the `+' or `-' operator:

          `date' + INTERVAL EXPR UNIT
          `date' - INTERVAL EXPR UNIT

     `INTERVAL EXPR UNIT' is permitted on either side of the `+'
     operator if the expression on the other side is a date or datetime
     value.  For the `-' operator, `INTERVAL EXPR UNIT' is permitted
     only on the right side, because it makes no sense to subtract a
     date or datetime value from an interval.

          mysql> SELECT '2008-12-31 23:59:59' + INTERVAL 1 SECOND;
                  -> '2009-01-01 00:00:00'
          mysql> SELECT INTERVAL 1 DAY + '2008-12-31';
                  -> '2009-01-01'
          mysql> SELECT '2005-01-01' - INTERVAL 1 SECOND;
                  -> '2004-12-31 23:59:59'
          mysql> SELECT DATE_ADD('2000-12-31 23:59:59',
              ->                 INTERVAL 1 SECOND);
                  -> '2001-01-01 00:00:00'
          mysql> SELECT DATE_ADD('2010-12-31 23:59:59',
              ->                 INTERVAL 1 DAY);
                  -> '2011-01-01 23:59:59'
          mysql> SELECT DATE_ADD('2100-12-31 23:59:59',
              ->                 INTERVAL '1:1' MINUTE_SECOND);
                  -> '2101-01-01 00:01:00'
          mysql> SELECT DATE_SUB('2005-01-01 00:00:00',
              ->                 INTERVAL '1 1:1:1' DAY_SECOND);
                  -> '2004-12-30 22:58:59'
          mysql> SELECT DATE_ADD('1900-01-01 00:00:00',
              ->                 INTERVAL '-1 10' DAY_HOUR);
                  -> '1899-12-30 14:00:00'
          mysql> SELECT DATE_SUB('1998-01-02', INTERVAL 31 DAY);
                  -> '1997-12-02'
          mysql> SELECT DATE_ADD('1992-12-31 23:59:59.000002',
              ->            INTERVAL '1.999999' SECOND_MICROSECOND);
                  -> '1993-01-01 00:00:01.000001'

     If you specify an interval value that is too short (does not
     include all the interval parts that would be expected from the
     UNIT keyword), MySQL assumes that you have left out the leftmost
     parts of the interval value.  For example, if you specify a UNIT
     of `DAY_SECOND', the value of EXPR is expected to have days,
     hours, minutes, and seconds parts. If you specify a value like
     `'1:10'', MySQL assumes that the days and hours parts are missing
     and the value represents minutes and seconds. In other words,
     `'1:10' DAY_SECOND' is interpreted in such a way that it is
     equivalent to `'1:10' MINUTE_SECOND'. This is analogous to the way
     that MySQL interprets *Note `TIME': time. values as representing
     elapsed time rather than as a time of day.

     Because EXPR is treated as a string, be careful if you specify a
     nonstring value with `INTERVAL'. For example, with an interval
     specifier of `HOUR_MINUTE', `6/4' evaluates to `1.5000' and is
     treated as 1 hour, 5000 minutes:

          mysql> SELECT 6/4;
                  -> 1.5000
          mysql> SELECT DATE_ADD('2009-01-01', INTERVAL 6/4 HOUR_MINUTE);
                  -> '2009-01-04 12:20:00'

     To ensure interpretation of the interval value as you expect, a
     `CAST()' operation may be used.  To treat `6/4' as 1 hour, 5
     minutes, cast it to a *Note `DECIMAL': fixed-point-types. value
     with a single fractional digit:

          mysql> SELECT CAST(6/4 AS DECIMAL(3,1));
                  -> 1.5
          mysql> SELECT DATE_ADD('1970-01-01 12:00:00',
              ->                 INTERVAL CAST(6/4 AS DECIMAL(3,1)) HOUR_MINUTE);
                  -> '1970-01-01 13:05:00'

     If you add to or subtract from a date value something that
     contains a time part, the result is automatically converted to a
     datetime value:

          mysql> SELECT DATE_ADD('2013-01-01', INTERVAL 1 DAY);
                  -> '2013-01-02'
          mysql> SELECT DATE_ADD('2013-01-01', INTERVAL 1 HOUR);
                  -> '2013-01-01 01:00:00'

     If you add `MONTH', `YEAR_MONTH', or `YEAR' and the resulting date
     has a day that is larger than the maximum day for the new month,
     the day is adjusted to the maximum days in the new month:

          mysql> SELECT DATE_ADD('2009-01-30', INTERVAL 1 MONTH);
                  -> '2009-02-28'

     Date arithmetic operations require complete dates and do not work
     with incomplete dates such as `'2006-07-00'' or badly malformed
     dates:

          mysql> SELECT DATE_ADD('2006-07-00', INTERVAL 1 DAY);
                  -> NULL
          mysql> SELECT '2005-03-32' + INTERVAL 1 MONTH;
                  -> NULL

   *  `DATE_FORMAT(DATE,FORMAT)'

     Formats the DATE value according to the FORMAT string.

     The following specifiers may be used in the FORMAT string. The
     ``%'' character is required before format specifier characters.

     This table lists specifier characters for the `DATE_FORMAT'
     function that may be used in the FORMAT string and provides a
     description of each specifier character.

     Specifier     Description
     `%a'          Abbreviated weekday name (`Sun'..`Sat')
     `%b'          Abbreviated month name (`Jan'..`Dec')
     `%c'          Month, numeric (`0'..`12')
     `%D'          Day of the month with English suffix (`0th',
                   `1st', `2nd', `3rd', ...)
     `%d'          Day of the month, numeric (`00'..`31')
     `%e'          Day of the month, numeric (`0'..`31')
     `%f'          Microseconds (`000000'..`999999')
     `%H'          Hour (`00'..`23')
     `%h'          Hour (`01'..`12')
     `%I'          Hour (`01'..`12')
     `%i'          Minutes, numeric (`00'..`59')
     `%j'          Day of year (`001'..`366')
     `%k'          Hour (`0'..`23')
     `%l'          Hour (`1'..`12')
     `%M'          Month name (`January'..`December')
     `%m'          Month, numeric (`00'..`12')
     `%p'          `AM' or `PM'
     `%r'          Time, 12-hour (`hh:mm:ss' followed by `AM' or
                   `PM')
     `%S'          Seconds (`00'..`59')
     `%s'          Seconds (`00'..`59')
     `%T'          Time, 24-hour (`hh:mm:ss')
     `%U'          Week (`00'..`53'), where Sunday is the first
                   day of the week
     `%u'          Week (`00'..`53'), where Monday is the first
                   day of the week
     `%V'          Week (`01'..`53'), where Sunday is the first
                   day of the week; used with `%X'
     `%v'          Week (`01'..`53'), where Monday is the first
                   day of the week; used with `%x'
     `%W'          Weekday name (`Sunday'..`Saturday')
     `%w'          Day of the week (`0'=Sunday..`6'=Saturday)
     `%X'          Year for the week where Sunday is the first
                   day of the week, numeric, four digits; used
                   with `%V'
     `%x'          Year for the week, where Monday is the first
                   day of the week, numeric, four digits; used
                   with `%v'
     `%Y'          Year, numeric, four digits
     `%y'          Year, numeric (two digits)
     `%%'          A literal ``%'' character
     `%X'          X, for any `X' not listed above

     Ranges for the month and day specifiers begin with zero due to the
     fact that MySQL permits the storing of incomplete dates such as
     `'2014-00-00''.

     The language used for day and month names and abbreviations is
     controlled by the value of the `lc_time_names' system variable
     (*Note locale-support::).

     `DATE_FORMAT()' returns a string with a character set and
     collation given by `character_set_connection' and
     `collation_connection' so that it can return month and weekday
     names containing non-ASCII characters.

          mysql> SELECT DATE_FORMAT('2009-10-04 22:23:00', '%W %M %Y');
                  -> 'Sunday October 2009'
          mysql> SELECT DATE_FORMAT('2007-10-04 22:23:00', '%H:%i:%s');
                  -> '22:23:00'
          mysql> SELECT DATE_FORMAT('1900-10-04 22:23:00',
              ->                 '%D %y %a %d %m %b %j');
                  -> '4th 00 Thu 04 10 Oct 277'
          mysql> SELECT DATE_FORMAT('1997-10-04 22:23:00',
              ->                 '%H %k %I %r %T %S %w');
                  -> '22 22 10 10:23:00 PM 22:23:00 00 6'
          mysql> SELECT DATE_FORMAT('1999-01-01', '%X %V');
                  -> '1998 52'
          mysql> SELECT DATE_FORMAT('2006-06-00', '%d');
                  -> '00'

   *  `DATE_SUB(DATE,INTERVAL EXPR UNIT)'

     See the description for `DATE_ADD()'.

   *  `DAY(DATE)'

     `DAY()' is a synonym for `DAYOFMONTH()'.

   *  `DAYNAME(DATE)'

     Returns the name of the weekday for DATE. The language used for the
     name is controlled by the value of the `lc_time_names' system
     variable (*Note locale-support::).

          mysql> SELECT DAYNAME('2007-02-03');
                  -> 'Saturday'

   *  `DAYOFMONTH(DATE)'

     Returns the day of the month for DATE, in the range `1' to `31', or
     `0' for dates such as `'0000-00-00'' or `'2008-00-00'' that have a
     zero day part.

          mysql> SELECT DAYOFMONTH('2007-02-03');
                  -> 3

   *  `DAYOFWEEK(DATE)'

     Returns the weekday index for DATE (`1' = Sunday, `2' = Monday,
     ..., `7' = Saturday). These index values correspond to the ODBC
     standard.

          mysql> SELECT DAYOFWEEK('2007-02-03');
                  -> 7

   *  `DAYOFYEAR(DATE)'

     Returns the day of the year for DATE, in the range `1' to `366'.

          mysql> SELECT DAYOFYEAR('2007-02-03');
                  -> 34

   *  `EXTRACT(UNIT FROM DATE)'

     The `EXTRACT()' function uses the same kinds of unit specifiers as
     `DATE_ADD()' or `DATE_SUB()', but extracts parts from the date
     rather than performing date arithmetic.

          mysql> SELECT EXTRACT(YEAR FROM '2009-07-02');
                 -> 2009
          mysql> SELECT EXTRACT(YEAR_MONTH FROM '2009-07-02 01:02:03');
                 -> 200907
          mysql> SELECT EXTRACT(DAY_MINUTE FROM '2009-07-02 01:02:03');
                 -> 20102
          mysql> SELECT EXTRACT(MICROSECOND
              ->                FROM '2003-01-02 10:30:00.000123');
                  -> 123

   *  `FROM_DAYS(N)'

     Given a day number N, returns a *Note `DATE': datetime. value.

          mysql> SELECT FROM_DAYS(730669);
                  -> '2007-07-03'

     Use `FROM_DAYS()' with caution on old dates. It is not intended
     for use with values that precede the advent of the Gregorian
     calendar (1582). See *Note mysql-calendar::.

   *  `FROM_UNIXTIME(UNIX_TIMESTAMP)',
     `FROM_UNIXTIME(UNIX_TIMESTAMP,FORMAT)'

     Returns a representation of the UNIX_TIMESTAMP argument as a value
     in `'YYYY-MM-DD HH:MM:SS'' or `YYYYMMDDHHMMSS.uuuuuu' format,
     depending on whether the function is used in a string or numeric
     context.  The value is expressed in the current time zone.
     UNIX_TIMESTAMP is an internal timestamp value such as is produced
     by the `UNIX_TIMESTAMP()' function.

     If FORMAT is given, the result is formatted according to the FORMAT
     string, which is used the same way as listed in the entry for the
     `DATE_FORMAT()' function.

          mysql> SELECT FROM_UNIXTIME(1196440219);
                  -> '2007-11-30 10:30:19'
          mysql> SELECT FROM_UNIXTIME(1196440219) + 0;
                  -> 20071130103019.000000
          mysql> SELECT FROM_UNIXTIME(UNIX_TIMESTAMP(),
              ->                      '%Y %D %M %h:%i:%s %x');
                  -> '2007 30th November 10:30:59 2007'

     Note: If you use `UNIX_TIMESTAMP()' and `FROM_UNIXTIME()' to
     convert between *Note `TIMESTAMP': datetime. values and Unix
     timestamp values, the conversion is lossy because the mapping is
     not one-to-one in both directions. For details, see the
     description of the `UNIX_TIMESTAMP()' function.

   *  `GET_FORMAT({DATE|TIME|DATETIME},
     {'EUR'|'USA'|'JIS'|'ISO'|'INTERNAL'})'

     Returns a format string. This function is useful in combination
     with the `DATE_FORMAT()' and the `STR_TO_DATE()' functions.

     The possible values for the first and second arguments result in
     several possible format strings (for the specifiers used, see the
     table in the `DATE_FORMAT()' function description). ISO format
     refers to ISO 9075, not ISO 8601.

     This table lists function calls for the `GET_FORMAT' function
     along with results for each function call.

     Function Call                            Result
     `GET_FORMAT(DATE,'USA')'                 `'%m.%d.%Y''
     `GET_FORMAT(DATE,'JIS')'                 `'%Y-%m-%d''
     `GET_FORMAT(DATE,'ISO')'                 `'%Y-%m-%d''
     `GET_FORMAT(DATE,'EUR')'                 `'%d.%m.%Y''
     `GET_FORMAT(DATE,'INTERNAL')'            `'%Y%m%d''
     `GET_FORMAT(DATETIME,'USA')'             `'%Y-%m-%d %H.%i.%s''
     `GET_FORMAT(DATETIME,'JIS')'             `'%Y-%m-%d %H:%i:%s''
     `GET_FORMAT(DATETIME,'ISO')'             `'%Y-%m-%d %H:%i:%s''
     `GET_FORMAT(DATETIME,'EUR')'             `'%Y-%m-%d %H.%i.%s''
     `GET_FORMAT(DATETIME,'INTERNAL')'        `'%Y%m%d%H%i%s''
     `GET_FORMAT(TIME,'USA')'                 `'%h:%i:%s %p''
     `GET_FORMAT(TIME,'JIS')'                 `'%H:%i:%s''
     `GET_FORMAT(TIME,'ISO')'                 `'%H:%i:%s''
     `GET_FORMAT(TIME,'EUR')'                 `'%H.%i.%s''
     `GET_FORMAT(TIME,'INTERNAL')'            `'%H%i%s''

     *Note `TIMESTAMP': datetime. can also be used as the first
     argument to `GET_FORMAT()', in which case the function returns the
     same values as for *Note `DATETIME': datetime.

          mysql> SELECT DATE_FORMAT('2003-10-03',GET_FORMAT(DATE,'EUR'));
                  -> '03.10.2003'
          mysql> SELECT STR_TO_DATE('10.31.2003',GET_FORMAT(DATE,'USA'));
                  -> '2003-10-31'

   *  `HOUR(TIME)'

     Returns the hour for TIME. The range of the return value is `0' to
     `23' for time-of-day values. However, the range of *Note `TIME':
     time. values actually is much larger, so `HOUR' can return values
     greater than `23'.

          mysql> SELECT HOUR('10:05:03');
                  -> 10
          mysql> SELECT HOUR('272:59:59');
                  -> 272

   *  `LAST_DAY(DATE)'

     Takes a date or datetime value and returns the corresponding value
     for the last day of the month. Returns `NULL' if the argument is
     invalid.

          mysql> SELECT LAST_DAY('2003-02-05');
                  -> '2003-02-28'
          mysql> SELECT LAST_DAY('2004-02-05');
                  -> '2004-02-29'
          mysql> SELECT LAST_DAY('2004-01-01 01:01:01');
                  -> '2004-01-31'
          mysql> SELECT LAST_DAY('2003-03-32');
                  -> NULL

   *  `LOCALTIME', `LOCALTIME()'

     `LOCALTIME' and `LOCALTIME()' are synonyms for `NOW()'.

   *  `LOCALTIMESTAMP', `LOCALTIMESTAMP()'

     `LOCALTIMESTAMP' and `LOCALTIMESTAMP()' are synonyms for `NOW()'.

   *  `MAKEDATE(YEAR,DAYOFYEAR)'

     Returns a date, given year and day-of-year values.  DAYOFYEAR must
     be greater than 0 or the result is `NULL'.

          mysql> SELECT MAKEDATE(2011,31), MAKEDATE(2011,32);
                  -> '2011-01-31', '2011-02-01'
          mysql> SELECT MAKEDATE(2011,365), MAKEDATE(2014,365);
                  -> '2011-12-31', '2014-12-31'
          mysql> SELECT MAKEDATE(2011,0);
                  -> NULL

   *  `MAKETIME(HOUR,MINUTE,SECOND)'

     Returns a time value calculated from the HOUR, MINUTE, and SECOND
     arguments.

          mysql> SELECT MAKETIME(12,15,30);
                  -> '12:15:30'

   *  `MICROSECOND(EXPR)'

     Returns the microseconds from the time or datetime expression EXPR
     as a number in the range from `0' to `999999'.

          mysql> SELECT MICROSECOND('12:00:00.123456');
                  -> 123456
          mysql> SELECT MICROSECOND('2009-12-31 23:59:59.000010');
                  -> 10

   *  `MINUTE(TIME)'

     Returns the minute for TIME, in the range `0' to `59'.

          mysql> SELECT MINUTE('2008-02-03 10:05:03');
                  -> 5

   *  `MONTH(DATE)'

     Returns the month for DATE, in the range `1' to `12' for January
     to December, or `0' for dates such as `'0000-00-00'' or
     `'2008-00-00'' that have a zero month part.

          mysql> SELECT MONTH('2008-02-03');
                  -> 2

   *  `MONTHNAME(DATE)'

     Returns the full name of the month for DATE. The language used for
     the name is controlled by the value of the `lc_time_names' system
     variable (*Note locale-support::).

          mysql> SELECT MONTHNAME('2008-02-03');
                  -> 'February'

   *  `NOW()'

     Returns the current date and time as a value in `'YYYY-MM-DD
     HH:MM:SS'' or `YYYYMMDDHHMMSS.uuuuuu' format, depending on whether
     the function is used in a string or numeric context.  The value is
     expressed in the current time zone.

          mysql> SELECT NOW();
                  -> '2007-12-15 23:50:26'
          mysql> SELECT NOW() + 0;
                  -> 20071215235026.000000

     `NOW()' returns a constant time that indicates the time at which
     the statement began to execute. (Within a stored function or
     trigger, `NOW()' returns the time at which the function or
     triggering statement began to execute.) This differs from the
     behavior for `SYSDATE()', which returns the exact time at which it
     executes.

          mysql> SELECT NOW(), SLEEP(2), NOW();
          +---------------------+----------+---------------------+
          | NOW()               | SLEEP(2) | NOW()               |
          +---------------------+----------+---------------------+
          | 2006-04-12 13:47:36 |        0 | 2006-04-12 13:47:36 |
          +---------------------+----------+---------------------+

          mysql> SELECT SYSDATE(), SLEEP(2), SYSDATE();
          +---------------------+----------+---------------------+
          | SYSDATE()           | SLEEP(2) | SYSDATE()           |
          +---------------------+----------+---------------------+
          | 2006-04-12 13:47:44 |        0 | 2006-04-12 13:47:46 |
          +---------------------+----------+---------------------+

     In addition, the `SET TIMESTAMP' statement affects the value
     returned by `NOW()' but not by `SYSDATE()'. This means that
     timestamp settings in the binary log have no effect on invocations
     of `SYSDATE()'.  Setting the timestamp to a nonzero value causes
     each subsequent invocation of `NOW()' to return that value.
     Setting the timestamp to zero cancels this effect so that `NOW()'
     once again returns the current date and time.

     See the description for `SYSDATE()' for additional information
     about the differences between the two functions.

   *  `PERIOD_ADD(P,N)'

     Adds N months to period P (in the format `YYMM' or `YYYYMM').
     Returns a value in the format `YYYYMM'. Note that the period
     argument P is _not_ a date value.

          mysql> SELECT PERIOD_ADD(200801,2);
                  -> 200803

   *  `PERIOD_DIFF(P1,P2)'

     Returns the number of months between periods P1 and P2. P1 and P2
     should be in the format `YYMM' or `YYYYMM'. Note that the period
     arguments P1 and P2 are _not_ date values.

          mysql> SELECT PERIOD_DIFF(200802,200703);
                  -> 11

   *  `QUARTER(DATE)'

     Returns the quarter of the year for DATE, in the range `1' to `4'.

          mysql> SELECT QUARTER('2008-04-01');
                  -> 2

   *  `SECOND(TIME)'

     Returns the second for TIME, in the range `0' to `59'.

          mysql> SELECT SECOND('10:05:03');
                  -> 3

   *  `SEC_TO_TIME(SECONDS)'

     Returns the SECONDS argument, converted to hours, minutes, and
     seconds, as a *Note `TIME': time. value. The range of the result
     is constrained to that of the *Note `TIME': time. data type. A
     warning occurs if the argument corresponds to a value outside that
     range.

          mysql> SELECT SEC_TO_TIME(2378);
                  -> '00:39:38'
          mysql> SELECT SEC_TO_TIME(2378) + 0;
                  -> 3938

   *  `STR_TO_DATE(STR,FORMAT)'

     This is the inverse of the `DATE_FORMAT()' function. It takes a
     string STR and a format string FORMAT.  `STR_TO_DATE()' returns a
     *Note `DATETIME': datetime. value if the format string contains
     both date and time parts, or a *Note `DATE': datetime. or *Note
     `TIME': time. value if the string contains only date or time
     parts. If the date, time, or datetime value extracted from STR is
     illegal, `STR_TO_DATE()' returns `NULL' and produces a warning.

     The server scans STR attempting to match FORMAT to it. The format
     string can contain literal characters and format specifiers
     beginning with `%'. Literal characters in FORMAT must match
     literally in STR. Format specifiers in FORMAT must match a date or
     time part in STR. For the specifiers that can be used in FORMAT,
     see the `DATE_FORMAT()' function description.

          mysql> SELECT STR_TO_DATE('01,5,2013','%d,%m,%Y');
                  -> '2013-05-01'
          mysql> SELECT STR_TO_DATE('May 1, 2013','%M %d,%Y');
                  -> '2013-05-01'

     Scanning starts at the beginning of STR and fails if FORMAT is
     found not to match. Extra characters at the end of STR are ignored.

          mysql> SELECT STR_TO_DATE('a09:30:17','a%h:%i:%s');
                  -> '09:30:17'
          mysql> SELECT STR_TO_DATE('a09:30:17','%h:%i:%s');
                  -> NULL
          mysql> SELECT STR_TO_DATE('09:30:17a','%h:%i:%s');
                  -> '09:30:17'

     Unspecified date or time parts have a value of 0, so incompletely
     specified values in STR produce a result with some or all parts
     set to 0:

          mysql> SELECT STR_TO_DATE('abc','abc');
                  -> '0000-00-00'
          mysql> SELECT STR_TO_DATE('9','%m');
                  -> '0000-09-00'
          mysql> SELECT STR_TO_DATE('9','%s');
                  -> '00:00:09'

     Range checking on the parts of date values is as described in
     *Note datetime::. This means, for example, that `zero' dates or
     dates with part values of 0 are permitted unless the SQL mode is
     set to disallow such values.

          mysql> SELECT STR_TO_DATE('00/00/0000', '%m/%d/%Y');
                  -> '0000-00-00'
          mysql> SELECT STR_TO_DATE('04/31/2004', '%m/%d/%Y');
                  -> '2004-04-31'

     *Note*:

     You cannot use format `"%X%V"' to convert a year-week string to a
     date because the combination of a year and week does not uniquely
     identify a year and month if the week crosses a month boundary. To
     convert a year-week to a date, you should also specify the weekday:

          mysql> SELECT STR_TO_DATE('200442 Monday', '%X%V %W');
                  -> '2004-10-18'

   *  `SUBDATE(DATE,INTERVAL EXPR UNIT)', `SUBDATE(EXPR,DAYS)'

     When invoked with the `INTERVAL' form of the second argument,
     `SUBDATE()' is a synonym for `DATE_SUB()'. For information on the
     `INTERVAL' UNIT argument, see the discussion for `DATE_ADD()'.

          mysql> SELECT DATE_SUB('2008-01-02', INTERVAL 31 DAY);
                  -> '2007-12-02'
          mysql> SELECT SUBDATE('2008-01-02', INTERVAL 31 DAY);
                  -> '2007-12-02'

     The second form enables the use of an integer value for DAYS. In
     such cases, it is interpreted as the number of days to be
     subtracted from the date or datetime expression EXPR.

          mysql> SELECT SUBDATE('2008-01-02 12:00:00', 31);
                  -> '2007-12-02 12:00:00'

   *  `SUBTIME(EXPR1,EXPR2)'

     `SUBTIME()' returns EXPR1 - EXPR2 expressed as a value in the same
     format as EXPR1.  EXPR1 is a time or datetime expression, and
     EXPR2 is a time expression.

          mysql> SELECT SUBTIME('2007-12-31 23:59:59.999999','1 1:1:1.000002');
                  -> '2007-12-30 22:58:58.999997'
          mysql> SELECT SUBTIME('01:00:00.999999', '02:00:00.999998');
                  -> '-00:59:59.999999'

   *  `SYSDATE()'

     Returns the current date and time as a value in `'YYYY-MM-DD
     HH:MM:SS'' or `YYYYMMDDHHMMSS.uuuuuu' format, depending on whether
     the function is used in a string or numeric context.

     `SYSDATE()' returns the time at which it executes. This differs
     from the behavior for `NOW()', which returns a constant time that
     indicates the time at which the statement began to execute.
     (Within a stored function or trigger, `NOW()' returns the time at
     which the function or triggering statement began to execute.)

          mysql> SELECT NOW(), SLEEP(2), NOW();
          +---------------------+----------+---------------------+
          | NOW()               | SLEEP(2) | NOW()               |
          +---------------------+----------+---------------------+
          | 2006-04-12 13:47:36 |        0 | 2006-04-12 13:47:36 |
          +---------------------+----------+---------------------+

          mysql> SELECT SYSDATE(), SLEEP(2), SYSDATE();
          +---------------------+----------+---------------------+
          | SYSDATE()           | SLEEP(2) | SYSDATE()           |
          +---------------------+----------+---------------------+
          | 2006-04-12 13:47:44 |        0 | 2006-04-12 13:47:46 |
          +---------------------+----------+---------------------+

     In addition, the `SET TIMESTAMP' statement affects the value
     returned by `NOW()' but not by `SYSDATE()'. This means that
     timestamp settings in the binary log have no effect on invocations
     of `SYSDATE()'.

     Because `SYSDATE()' can return different values even within the
     same statement, and is not affected by `SET TIMESTAMP', it is
     nondeterministic and therefore unsafe for replication if
     statement-based binary logging is used. If that is a problem, you
     can use row-based logging.

     Alternatively, you can use the `--sysdate-is-now' option to cause
     `SYSDATE()' to be an alias for `NOW()'. This works if the option
     is used on both the master and the slave.

     The nondeterministic nature of `SYSDATE()' also means that indexes
     cannot be used for evaluating expressions that refer to it.

   *  `TIME(EXPR)'

     Extracts the time part of the time or datetime expression EXPR and
     returns it as a string.

     This function is unsafe for statement-based replication.
     Beginning with MySQL 5.5.1, a warning is logged if you use this
     function when `binlog_format' is set to `STATEMENT'. (Bug #47995)

          mysql> SELECT TIME('2003-12-31 01:02:03');
                  -> '01:02:03'
          mysql> SELECT TIME('2003-12-31 01:02:03.000123');
                  -> '01:02:03.000123'

   *  `TIMEDIFF(EXPR1,EXPR2)'

     `TIMEDIFF()' returns EXPR1 - EXPR2 expressed as a time value.
     EXPR1 and EXPR2 are time or date-and-time expressions, but both
     must be of the same type.

     The result returned by `TIMEDIFF()' is limited to the range
     allowed for *Note `TIME': time. values. Alternatively, you can use
     either of the functions `TIMESTAMPDIFF()' and `UNIX_TIMESTAMP()',
     both of which return integers.

          mysql> SELECT TIMEDIFF('2000:01:01 00:00:00',
              ->                 '2000:01:01 00:00:00.000001');
                  -> '-00:00:00.000001'
          mysql> SELECT TIMEDIFF('2008-12-31 23:59:59.000001',
              ->                 '2008-12-30 01:01:01.000002');
                  -> '46:58:57.999999'

   *  `TIMESTAMP(EXPR)', `TIMESTAMP(EXPR1,EXPR2)'

     With a single argument, this function returns the date or datetime
     expression EXPR as a datetime value. With two arguments, it adds
     the time expression EXPR2 to the date or datetime expression EXPR1
     and returns the result as a datetime value.

          mysql> SELECT TIMESTAMP('2003-12-31');
                  -> '2003-12-31 00:00:00'
          mysql> SELECT TIMESTAMP('2003-12-31 12:00:00','12:00:00');
                  -> '2004-01-01 00:00:00'

   *  `TIMESTAMPADD(UNIT,INTERVAL,DATETIME_EXPR)'

     Adds the integer expression INTERVAL to the date or datetime
     expression DATETIME_EXPR. The unit for INTERVAL is given by the
     UNIT argument, which should be one of the following values:
     `MICROSECOND' (microseconds), `SECOND', `MINUTE', `HOUR', `DAY',
     `WEEK', `MONTH', `QUARTER', or `YEAR'.

     It is possible to use `FRAC_SECOND' in place of `MICROSECOND', but
     `FRAC_SECOND' is deprecated.  `FRAC_SECOND' was removed in MySQL
     5.5.3.

     The UNIT value may be specified using one of keywords as shown, or
     with a prefix of `SQL_TSI_'. For example, `DAY' and `SQL_TSI_DAY'
     both are legal.

          mysql> SELECT TIMESTAMPADD(MINUTE,1,'2003-01-02');
                  -> '2003-01-02 00:01:00'
          mysql> SELECT TIMESTAMPADD(WEEK,1,'2003-01-02');
                  -> '2003-01-09'

   *  `TIMESTAMPDIFF(UNIT,DATETIME_EXPR1,DATETIME_EXPR2)'

     Returns DATETIME_EXPR2 - DATETIME_EXPR1, where DATETIME_EXPR1 and
     DATETIME_EXPR2 are date or datetime expressions. One expression
     may be a date and the other a datetime; a date value is treated as
     a datetime having the time part `'00:00:00'' where necessary. The
     unit for the result (an integer) is given by the UNIT argument.
     The legal values for UNIT are the same as those listed in the
     description of the `TIMESTAMPADD()' function.

          mysql> SELECT TIMESTAMPDIFF(MONTH,'2003-02-01','2003-05-01');
                  -> 3
          mysql> SELECT TIMESTAMPDIFF(YEAR,'2002-05-01','2001-01-01');
                  -> -1
          mysql> SELECT TIMESTAMPDIFF(MINUTE,'2003-02-01','2003-05-01 12:05:55');
                  -> 128885

     *Note*:

     The order of the date or datetime arguments for this function is
     the opposite of that used with the `TIMESTAMP()' function when
     invoked with 2 arguments.

   *  `TIME_FORMAT(TIME,FORMAT)'

     This is used like the `DATE_FORMAT()' function, but the FORMAT
     string may contain format specifiers only for hours, minutes,
     seconds, and microseconds.  Other specifiers produce a `NULL'
     value or `0'.

     If the TIME value contains an hour part that is greater than `23',
     the `%H' and `%k' hour format specifiers produce a value larger
     than the usual range of `0..23'. The other hour format specifiers
     produce the hour value modulo 12.

          mysql> SELECT TIME_FORMAT('100:00:00', '%H %k %h %I %l');
                  -> '100 100 04 04 4'

   *  `TIME_TO_SEC(TIME)'

     Returns the TIME argument, converted to seconds.

          mysql> SELECT TIME_TO_SEC('22:23:00');
                  -> 80580
          mysql> SELECT TIME_TO_SEC('00:39:38');
                  -> 2378

   *  `TO_DAYS(DATE)'

     Given a date DATE, returns a day number (the number of days since
     year 0).

          mysql> SELECT TO_DAYS(950501);
                  -> 728779
          mysql> SELECT TO_DAYS('2007-10-07');
                  -> 733321

     `TO_DAYS()' is not intended for use with values that precede the
     advent of the Gregorian calendar (1582), because it does not take
     into account the days that were lost when the calendar was
     changed. For dates before 1582 (and possibly a later year in other
     locales), results from this function are not reliable. See *Note
     mysql-calendar::, for details.

     Remember that MySQL converts two-digit year values in dates to
     four-digit form using the rules in *Note date-and-time-types::.
     For example, `'2008-10-07'' and `'08-10-07'' are seen as identical
     dates:

          mysql> SELECT TO_DAYS('2008-10-07'), TO_DAYS('08-10-07');
                  -> 733687, 733687

     In MySQL, the zero date is defined as `'0000-00-00'', even though
     this date is itself considered invalid. This means that, for
     `'0000-00-00'' and `'0000-01-01'', `TO_DAYS()' returns the values
     shown here:

          mysql> SELECT TO_DAYS('0000-00-00');
          +-----------------------+
          | to_days('0000-00-00') |
          +-----------------------+
          |                  NULL |
          +-----------------------+
          1 row in set, 1 warning (0.00 sec)

          mysql> SHOW WARNINGS;
          +---------+------+----------------------------------------+
          | Level   | Code | Message                                |
          +---------+------+----------------------------------------+
          | Warning | 1292 | Incorrect datetime value: '0000-00-00' |
          +---------+------+----------------------------------------+
          1 row in set (0.00 sec)

          mysql> SELECT TO_DAYS('0000-01-01');
          +-----------------------+
          | to_days('0000-01-01') |
          +-----------------------+
          |                     1 |
          +-----------------------+
          1 row in set (0.00 sec)

     This is true whether or not the `ALLOW_INVALID_DATES' SQL server
     mode is enabled.

   *  `TO_SECONDS(EXPR)'

     Given a date or datetime EXPR, returns a the number of seconds
     since the year 0. If EXPR is not a valid date or datetime value,
     returns `NULL'.

          mysql> SELECT TO_SECONDS(950501);
                  -> 62966505600
          mysql> SELECT TO_SECONDS('2009-11-29');
                  -> 63426672000
          mysql> SELECT TO_SECONDS('2009-11-29 13:43:32');
                  -> 63426721412
          mysql> SELECT TO_SECONDS( NOW() );
                  -> 63426721458

     Like `TO_DAYS()', `TO_SECONDS()' is not intended for use with
     values that precede the advent of the Gregorian calendar (1582),
     because it does not take into account the days that were lost when
     the calendar was changed. For dates before 1582 (and possibly a
     later year in other locales), results from this function are not
     reliable. See *Note mysql-calendar::, for details.

     Like `TO_DAYS()', `TO_SECONDS()', converts two-digit year values
     in dates to four-digit form using the rules in *Note
     date-and-time-types::.

     `TO_SECONDS()' is available beginning with MySQL 5.5.0.

     In MySQL, the zero date is defined as `'0000-00-00'', even though
     this date is itself considered invalid. This means that, for
     `'0000-00-00'' and `'0000-01-01'', `TO_SECONDS()' returns the
     values shown here:

          mysql> SELECT TO_SECONDS('0000-00-00');
          +--------------------------+
          | TO_SECONDS('0000-00-00') |
          +--------------------------+
          |                     NULL |
          +--------------------------+
          1 row in set, 1 warning (0.00 sec)

          mysql> SHOW WARNINGS;
          +---------+------+----------------------------------------+
          | Level   | Code | Message                                |
          +---------+------+----------------------------------------+
          | Warning | 1292 | Incorrect datetime value: '0000-00-00' |
          +---------+------+----------------------------------------+
          1 row in set (0.00 sec)

          mysql> SELECT TO_SECONDS('0000-01-01');
          +--------------------------+
          | TO_SECONDS('0000-01-01') |
          +--------------------------+
          |                    86400 |
          +--------------------------+
          1 row in set (0.00 sec)

     This is true whether or not the `ALLOW_INVALID_DATES' SQL server
     mode is enabled.

   *  `UNIX_TIMESTAMP()', `UNIX_TIMESTAMP(DATE)'

     If called with no argument, returns a Unix timestamp (seconds
     since `'1970-01-01 00:00:00'' UTC) as an unsigned integer. If
     `UNIX_TIMESTAMP()' is called with a DATE argument, it returns the
     value of the argument as seconds since `'1970-01-01 00:00:00''
     UTC. DATE may be a *Note `DATE': datetime. string, a *Note
     `DATETIME': datetime. string, a *Note `TIMESTAMP': datetime, or a
     number in the format `YYMMDD' or `YYYYMMDD'. The server interprets
     DATE as a value in the current time zone and converts it to an
     internal value in UTC. Clients can set their time zone as
     described in *Note time-zone-support::.

          mysql> SELECT UNIX_TIMESTAMP();
                  -> 1196440210
          mysql> SELECT UNIX_TIMESTAMP('2007-11-30 10:30:19');
                  -> 1196440219

     When `UNIX_TIMESTAMP()' is used on a *Note `TIMESTAMP': datetime.
     column, the function returns the internal timestamp value
     directly, with no implicit `string-to-Unix-timestamp' conversion.
     If you pass an out-of-range date to `UNIX_TIMESTAMP()', it returns
     `0'.

     Note: If you use `UNIX_TIMESTAMP()' and `FROM_UNIXTIME()' to
     convert between *Note `TIMESTAMP': datetime. values and Unix
     timestamp values, the conversion is lossy because the mapping is
     not one-to-one in both directions. For example, due to conventions
     for local time zone changes, it is possible for two
     `UNIX_TIMESTAMP()' to map two *Note `TIMESTAMP': datetime. values
     to the same Unix timestamp value.  `FROM_UNIXTIME()' will map that
     value back to only one of the original *Note `TIMESTAMP':
     datetime. values. Here is an example, using *Note `TIMESTAMP':
     datetime. values in the `CET' time zone:


          mysql> SELECT UNIX_TIMESTAMP('2005-03-27 03:00:00');
          +---------------------------------------+
          | UNIX_TIMESTAMP('2005-03-27 03:00:00') |
          +---------------------------------------+
          |                            1111885200 |
          +---------------------------------------+
          mysql> SELECT UNIX_TIMESTAMP('2005-03-27 02:00:00');
          +---------------------------------------+
          | UNIX_TIMESTAMP('2005-03-27 02:00:00') |
          +---------------------------------------+
          |                            1111885200 |
          +---------------------------------------+
          mysql> SELECT FROM_UNIXTIME(1111885200);
          +---------------------------+
          | FROM_UNIXTIME(1111885200) |
          +---------------------------+
          | 2005-03-27 03:00:00       |
          +---------------------------+

     If you want to subtract `UNIX_TIMESTAMP()' columns, you might want
     to cast the result to signed integers. See *Note cast-functions::.

   *  `UTC_DATE', `UTC_DATE()'

     Returns the current UTC date as a value in `'YYYY-MM-DD'' or
     `YYYYMMDD' format, depending on whether the function is used in a
     string or numeric context.

          mysql> SELECT UTC_DATE(), UTC_DATE() + 0;
                  -> '2003-08-14', 20030814

   *  `UTC_TIME', `UTC_TIME()'

     Returns the current UTC time as a value in `'HH:MM:SS'' or
     `HHMMSS.uuuuuu' format, depending on whether the function is used
     in a string or numeric context.

          mysql> SELECT UTC_TIME(), UTC_TIME() + 0;
                  -> '18:07:53', 180753.000000

   *  `UTC_TIMESTAMP', `UTC_TIMESTAMP()'

     Returns the current UTC date and time as a value in `'YYYY-MM-DD
     HH:MM:SS'' or `YYYYMMDDHHMMSS.uuuuuu' format, depending on whether
     the function is used in a string or numeric context.

          mysql> SELECT UTC_TIMESTAMP(), UTC_TIMESTAMP() + 0;
                  -> '2003-08-14 18:08:04', 20030814180804.000000

   *  `WEEK(DATE[,MODE])'

     This function returns the week number for DATE. The two-argument
     form of `WEEK()' enables you to specify whether the week starts on
     Sunday or Monday and whether the return value should be in the
     range from `0' to `53' or from `1' to `53'. If the MODE argument
     is omitted, the value of the `default_week_format' system variable
     is used. See *Note server-system-variables::.

     The following table describes how the MODE argument works.

     This table describes how the MODE argument of the `WEEK' function
     works. For each mode value, the table lists the first day of the
     week, the range, and a description of week 1.

     Mode    First day of  Range         Week 1 is the first week ...
             week                        
     0       Sunday        0-53          with a Sunday in this year
     1       Monday        0-53          with more than 3 days this year
     2       Sunday        1-53          with a Sunday in this year
     3       Monday        1-53          with more than 3 days this year
     4       Sunday        0-53          with more than 3 days this year
     5       Monday        0-53          with a Monday in this year
     6       Sunday        1-53          with more than 3 days this year
     7       Monday        1-53          with a Monday in this year

          mysql> SELECT WEEK('2008-02-20');
                  -> 7
          mysql> SELECT WEEK('2008-02-20',0);
                  -> 7
          mysql> SELECT WEEK('2008-02-20',1);
                  -> 8
          mysql> SELECT WEEK('2008-12-31',1);
                  -> 53

     Note that if a date falls in the last week of the previous year,
     MySQL returns `0' if you do not use `2', `3', `6', or `7' as the
     optional MODE argument:

          mysql> SELECT YEAR('2000-01-01'), WEEK('2000-01-01',0);
                  -> 2000, 0

     One might argue that MySQL should return `52' for the `WEEK()'
     function, because the given date actually occurs in the 52nd week
     of 1999. We decided to return `0' instead because we want the
     function to return `the week number in the given year.' This makes
     use of the `WEEK()' function reliable when combined with other
     functions that extract a date part from a date.

     If you would prefer the result to be evaluated with respect to the
     year that contains the first day of the week for the given date,
     use `0', `2', `5', or `7' as the optional MODE argument.

          mysql> SELECT WEEK('2000-01-01',2);
                  -> 52

     Alternatively, use the `YEARWEEK()' function:

          mysql> SELECT YEARWEEK('2000-01-01');
                  -> 199952
          mysql> SELECT MID(YEARWEEK('2000-01-01'),5,2);
                  -> '52'

   *  `WEEKDAY(DATE)'

     Returns the weekday index for DATE (`0' = Monday, `1' = Tuesday,
     ... `6' = Sunday).

          mysql> SELECT WEEKDAY('2008-02-03 22:23:00');
                  -> 6
          mysql> SELECT WEEKDAY('2007-11-06');
                  -> 1

   *  `WEEKOFYEAR(DATE)'

     Returns the calendar week of the date as a number in the range
     from `1' to `53'.  `WEEKOFYEAR()' is a compatibility function that
     is equivalent to `WEEK(DATE,3)'.

          mysql> SELECT WEEKOFYEAR('2008-02-20');
                  -> 8

   *  `YEAR(DATE)'

     Returns the year for DATE, in the range `1000' to `9999', or `0'
     for the `zero' date.

          mysql> SELECT YEAR('1987-01-01');
                  -> 1987

   *  `YEARWEEK(DATE)', `YEARWEEK(DATE,MODE)'

     Returns year and week for a date. The MODE argument works exactly
     like the MODE argument to `WEEK()'. The year in the result may be
     different from the year in the date argument for the first and the
     last week of the year.

          mysql> SELECT YEARWEEK('1987-01-01');
                  -> 198653

     Note that the week number is different from what the `WEEK()'
     function would return (`0') for optional arguments `0' or `1', as
     `WEEK()' then returns the week in the context of the given year.


File: manual.info,  Node: mysql-calendar,  Next: fulltext-search,  Prev: date-and-time-functions,  Up: functions

12.8 What Calendar Is Used By MySQL?
====================================

MySQL uses what is known as a _proleptic Gregorian calendar_.

Every country that has switched from the Julian to the Gregorian
calendar has had to discard at least ten days during the switch.  To
see how this works, consider the month of October 1582, when the first
Julian-to-Gregorian switch occurred.

This table shows the month of October 1582, when the first
Julian-to-Gregorian switch occurred. Table headings are days of the
week and table rows list the dates for each day of the week. The table
is intended to illustrate that there are no dates between October 4 and
October 15.

Monday     Tuesday    Wednesday  Thursday   Friday     Saturday   Sunday
1          2          3          4          15         16         17
18         19         20         21         22         23         24
25         26         27         28         29         30         31

There are no dates between October 4 and October 15. This discontinuity
is called the _cutover_. Any dates before the cutover are Julian, and
any dates following the cutover are Gregorian. Dates during a cutover
are nonexistent.

A calendar applied to dates when it was not actually in use is called
_proleptic_. Thus, if we assume there was never a cutover and Gregorian
rules always rule, we have a proleptic Gregorian calendar. This is what
is used by MySQL, as is required by standard SQL. For this reason,
dates prior to the cutover stored as MySQL *Note `DATE': datetime. or
*Note `DATETIME': datetime. values must be adjusted to compensate for
the difference. It is important to realize that the cutover did not
occur at the same time in all countries, and that the later it
happened, the more days were lost. For example, in Great Britain, it
took place in 1752, when Wednesday September 2 was followed by Thursday
September 14. Russia remained on the Julian calendar until 1918, losing
13 days in the process, and what is popularly referred to as its
`October Revolution' occurred in November according to the Gregorian
calendar.


File: manual.info,  Node: fulltext-search,  Next: cast-functions,  Prev: mysql-calendar,  Up: functions

12.9 Full-Text Search Functions
===============================

* Menu:

* fulltext-natural-language::    Natural Language Full-Text Searches
* fulltext-boolean::             Boolean Full-Text Searches
* fulltext-query-expansion::     Full-Text Searches with Query Expansion
* fulltext-stopwords::           Full-Text Stopwords
* fulltext-restrictions::        Full-Text Restrictions
* fulltext-fine-tuning::         Fine-Tuning MySQL Full-Text Search
* full-text-adding-collation::   Adding a Collation for Full-Text Indexing

`MATCH (COL1,COL2,...)  AGAINST (EXPR [SEARCH_MODIFIER])'

     SEARCH_MODIFIER:
       {
            IN NATURAL LANGUAGE MODE
          | IN NATURAL LANGUAGE MODE WITH QUERY EXPANSION
          | IN BOOLEAN MODE
          | WITH QUERY EXPANSION
       }

MySQL has support for full-text indexing and searching:

   * A full-text index in MySQL is an index of type `FULLTEXT'.

   * Full-text indexes can be used only with `MyISAM' tables. (In MySQL
     5.6 and up, they can also be used with `InnoDB' tables.)
     Full-text indexes can be created only for *Note `CHAR': char,
     *Note `VARCHAR': char, or *Note `TEXT': blob. columns.

   * A `FULLTEXT' index definition can be given in the *Note `CREATE
     TABLE': create-table. statement when a table is created, or added
     later using *Note `ALTER TABLE': alter-table. or *Note `CREATE
     INDEX': create-index.

   * For large data sets, it is much faster to load your data into a
     table that has no `FULLTEXT' index and then create the index after
     that, than to load data into a table that has an existing
     `FULLTEXT' index.

Full-text searching is performed using `MATCH() ... AGAINST' syntax.
`MATCH()' takes a comma-separated list that names the columns to be
searched.  `AGAINST' takes a string to search for, and an optional
modifier that indicates what type of search to perform.  The search
string must be a string value that is constant during query evaluation.
This rules out, for example, a table column because that can differ for
each row.

There are three types of full-text searches:

   * A natural language search interprets the search string as a phrase
     in natural human language (a phrase in free text).  There are no
     special operators. The stopword list applies. In addition, words
     that are present in 50% or more of the rows are considered common
     and do not match.

     Full-text searches are natural language searches if the `IN
     NATURAL LANGUAGE MODE' modifier is given or if no modifier is
     given. For more information, see *Note fulltext-natural-language::.

   * A boolean search interprets the search string using the rules of a
     special query language. The string contains the words to search
     for. It can also contain operators that specify requirements such
     that a word must be present or absent in matching rows, or that it
     should be weighted higher or lower than usual. Common words such
     as `some' or `then' are stopwords and do not match if present in
     the search string. The `IN BOOLEAN MODE' modifier specifies a
     boolean search. For more information, see *Note fulltext-boolean::.

   * A query expansion search is a modification of a natural language
     search. The search string is used to perform a natural language
     search. Then words from the most relevant rows returned by the
     search are added to the search string and the search is done
     again. The query returns the rows from the second search. The `IN
     NATURAL LANGUAGE MODE WITH QUERY EXPANSION' or `WITH QUERY
     EXPANSION' modifier specifies a query expansion search. For more
     information, see *Note fulltext-query-expansion::.

Constraints on full-text searching are listed in *Note
fulltext-restrictions::.

The *Note `myisam_ftdump': myisam-ftdump. utility can be used to dump
the contents of a full-text index. This may be helpful for debugging
full-text queries. See *Note myisam-ftdump::.


File: manual.info,  Node: fulltext-natural-language,  Next: fulltext-boolean,  Prev: fulltext-search,  Up: fulltext-search

12.9.1 Natural Language Full-Text Searches
------------------------------------------

By default or with the `IN NATURAL LANGUAGE MODE' modifier, the
`MATCH()' function performs a natural language search for a string
against a _text collection_. A collection is a set of one or more
columns included in a `FULLTEXT' index. The search string is given as
the argument to `AGAINST()'. For each row in the table, `MATCH()'
returns a relevance value; that is, a similarity measure between the
search string and the text in that row in the columns named in the
`MATCH()' list.

     mysql> CREATE TABLE articles (
         ->   id INT UNSIGNED AUTO_INCREMENT NOT NULL PRIMARY KEY,
         ->   title VARCHAR(200),
         ->   body TEXT,
         ->   FULLTEXT (title,body)
         -> ) ENGINE=MyISAM;
     Query OK, 0 rows affected (0.00 sec)

     mysql> INSERT INTO articles (title,body) VALUES
         -> ('MySQL Tutorial','DBMS stands for DataBase ...'),
         -> ('How To Use MySQL Well','After you went through a ...'),
         -> ('Optimizing MySQL','In this tutorial we will show ...'),
         -> ('1001 MySQL Tricks','1. Never run mysqld as root. 2. ...'),
         -> ('MySQL vs. YourSQL','In the following database comparison ...'),
         -> ('MySQL Security','When configured properly, MySQL ...');
     Query OK, 6 rows affected (0.00 sec)
     Records: 6  Duplicates: 0  Warnings: 0

     mysql> SELECT * FROM articles
         -> WHERE MATCH (title,body)
         -> AGAINST ('database' IN NATURAL LANGUAGE MODE);
     +----+-------------------+------------------------------------------+
     | id | title             | body                                     |
     +----+-------------------+------------------------------------------+
     |  5 | MySQL vs. YourSQL | In the following database comparison ... |
     |  1 | MySQL Tutorial    | DBMS stands for DataBase ...             |
     +----+-------------------+------------------------------------------+
     2 rows in set (0.00 sec)

By default, the search is performed in case-insensitive fashion.
However, you can perform a case-sensitive full-text search by using a
binary collation for the indexed columns. For example, a column that
uses the `latin1' character set of can be assigned a collation of
`latin1_bin' to make it case sensitive for full-text searches.

When `MATCH()' is used in a `WHERE' clause, as in the example shown
earlier, the rows returned are automatically sorted with the highest
relevance first. Relevance values are nonnegative floating-point
numbers. Zero relevance means no similarity.  Relevance is computed
based on the number of words in the row, the number of unique words in
that row, the total number of words in the collection, and the number
of documents (rows) that contain a particular word.

To simply count matches, you could use a query like this:

     mysql> SELECT COUNT(*) FROM articles
         -> WHERE MATCH (title,body)
         -> AGAINST ('database' IN NATURAL LANGUAGE MODE);
     +----------+
     | COUNT(*) |
     +----------+
     |        2 |
     +----------+
     1 row in set (0.00 sec)

However, you might find it quicker to rewrite the query as follows:

     mysql> SELECT
         -> COUNT(IF(MATCH (title,body) AGAINST ('database' IN NATURAL LANGUAGE MODE), 1, NULL))
         -> AS count
         -> FROM articles;
     +-------+
     | count |
     +-------+
     |     2 |
     +-------+
     1 row in set (0.03 sec)

The first query sorts the results by relevance whereas the second does
not. However, the second query performs a full table scan and the first
does not. The first may be faster if the search matches few rows;
otherwise, the second may be faster because it would read many rows
anyway.

For natural-language full-text searches, it is a requirement that the
columns named in the `MATCH()' function be the same columns included in
some `FULLTEXT' index in your table. For the preceding query, note that
the columns named in the `MATCH()' function (`title' and `body') are the
same as those named in the definition of the `article' table's
`FULLTEXT' index. If you wanted to search the `title' or `body'
separately, you would need to create separate `FULLTEXT' indexes for
each column.

It is also possible to perform a boolean search or a search with query
expansion. These search types are described in *Note
fulltext-boolean::, and *Note fulltext-query-expansion::.

A full-text search that uses an index can name columns only from a
single table in the `MATCH()' clause because an index cannot span
multiple tables. A boolean search can be done in the absence of an
index (albeit more slowly), in which case it is possible to name
columns from multiple tables.

The preceding example is a basic illustration that shows how to use the
`MATCH()' function where rows are returned in order of decreasing
relevance. The next example shows how to retrieve the relevance values
explicitly.  Returned rows are not ordered because the *Note `SELECT':
select. statement includes neither `WHERE' nor `ORDER BY' clauses:

     mysql> SELECT id, MATCH (title,body)
         -> AGAINST ('Tutorial' IN NATURAL LANGUAGE MODE) AS score
         -> FROM articles;
     +----+------------------+
     | id | score            |
     +----+------------------+
     |  1 | 0.65545833110809 |
     |  2 |                0 |
     |  3 | 0.66266459226608 |
     |  4 |                0 |
     |  5 |                0 |
     |  6 |                0 |
     +----+------------------+
     6 rows in set (0.00 sec)

The following example is more complex. The query returns the relevance
values and it also sorts the rows in order of decreasing relevance. To
achieve this result, you should specify `MATCH()' twice: once in the
*Note `SELECT': select. list and once in the `WHERE' clause. This
causes no additional overhead, because the MySQL optimizer notices that
the two `MATCH()' calls are identical and invokes the full-text search
code only once.

     mysql> SELECT id, body, MATCH (title,body) AGAINST
         -> ('Security implications of running MySQL as root'
         -> IN NATURAL LANGUAGE MODE) AS score
         -> FROM articles WHERE MATCH (title,body) AGAINST
         -> ('Security implications of running MySQL as root'
         -> IN NATURAL LANGUAGE MODE);
     +----+-------------------------------------+-----------------+
     | id | body                                | score           |
     +----+-------------------------------------+-----------------+
     |  4 | 1. Never run mysqld as root. 2. ... | 1.5219271183014 |
     |  6 | When configured properly, MySQL ... | 1.3114095926285 |
     +----+-------------------------------------+-----------------+
     2 rows in set (0.00 sec)

The MySQL `FULLTEXT' implementation regards any sequence of true word
characters (letters, digits, and underscores) as a word. That sequence
may also contain apostrophes (``'''), but not more than one in a row.
This means that `aaa'bbb' is regarded as one word, but `aaa''bbb' is
regarded as two words. Apostrophes at the beginning or the end of a
word are stripped by the `FULLTEXT' parser; `'aaa'bbb'' would be parsed
as `aaa'bbb'.

The `FULLTEXT' parser determines where words start and end by looking
for certain delimiter characters; for example, `` '' (space), ``,''
(comma), and ``.'' (period). If words are not separated by delimiters
(as in, for example, Chinese), the `FULLTEXT' parser cannot determine
where a word begins or ends. To be able to add words or other indexed
terms in such languages to a `FULLTEXT' index, you must preprocess them
so that they are separated by some arbitrary delimiter such as ``"''.

In MySQL 5.5, it is possible to write a plugin that replaces the
built-in full-text parser. For details, see *Note plugin-api::. For
example parser plugin source code, see the `plugin/fulltext' directory
of a MySQL source distribution.

Some words are ignored in full-text searches:

   * Any word that is too short is ignored. The default minimum length
     of words that are found by full-text searches is four characters.

   * Words in the stopword list are ignored. A stopword is a word such
     as `the' or `some' that is so common that it is considered to have
     zero semantic value.  There is a built-in stopword list, but it
     can be overwritten by a user-defined list.

The default stopword list is given in *Note fulltext-stopwords::. The
default minimum word length and stopword list can be changed as
described in *Note fulltext-fine-tuning::.

Every correct word in the collection and in the query is weighted
according to its significance in the collection or query. Consequently,
a word that is present in many documents has a lower weight (and may
even have a zero weight), because it has lower semantic value in this
particular collection.  Conversely, if the word is rare, it receives a
higher weight.  The weights of the words are combined to compute the
relevance of the row.

Such a technique works best with large collections (in fact, it was
carefully tuned this way). For very small tables, word distribution
does not adequately reflect their semantic value, and this model may
sometimes produce bizarre results. For example, although the word
`MySQL' is present in every row of the `articles' table shown earlier,
a search for the word produces no results:

     mysql> SELECT * FROM articles
         -> WHERE MATCH (title,body)
         -> AGAINST ('MySQL' IN NATURAL LANGUAGE MODE);
     Empty set (0.00 sec)

The search result is empty because the word `MySQL' is present in at
least 50% of the rows. As such, it is effectively treated as a
stopword. For large data sets, this is the most desirable behavior: A
natural language query should not return every second row from a 1GB
table. For small data sets, it may be less desirable.

A word that matches half of the rows in a table is less likely to
locate relevant documents. In fact, it most likely finds plenty of
irrelevant documents. We all know this happens far too often when we
are trying to find something on the Internet with a search engine. It
is with this reasoning that rows containing the word are assigned a low
semantic value for _the particular data set in which they occur_. A
given word may reach the 50% threshold in one data set but not another.

The 50% threshold has a significant implication when you first try
full-text searching to see how it works: If you create a table and
insert only one or two rows of text into it, every word in the text
occurs in at least 50% of the rows. As a result, no search returns any
results. Be sure to insert at least three rows, and preferably many
more. Users who need to bypass the 50% limitation can use the boolean
search mode; see *Note fulltext-boolean::.


File: manual.info,  Node: fulltext-boolean,  Next: fulltext-query-expansion,  Prev: fulltext-natural-language,  Up: fulltext-search

12.9.2 Boolean Full-Text Searches
---------------------------------

MySQL can perform boolean full-text searches using the `IN BOOLEAN
MODE' modifier. With this modifier, certain characters have special
meaning at the beginning or end of words in the search string. In the
following query, the `+' and `-' operators indicate that a word is
required to be present or absent, respectively, for a match to occur.
Thus, the query retrieves all the rows that contain the word `MySQL'
but that do _not_ contain the word `YourSQL':

     mysql> SELECT * FROM articles WHERE MATCH (title,body)
         -> AGAINST ('+MySQL -YourSQL' IN BOOLEAN MODE);
     +----+-----------------------+-------------------------------------+
     | id | title                 | body                                |
     +----+-----------------------+-------------------------------------+
     |  1 | MySQL Tutorial        | DBMS stands for DataBase ...        |
     |  2 | How To Use MySQL Well | After you went through a ...        |
     |  3 | Optimizing MySQL      | In this tutorial we will show ...   |
     |  4 | 1001 MySQL Tricks     | 1. Never run mysqld as root. 2. ... |
     |  6 | MySQL Security        | When configured properly, MySQL ... |
     +----+-----------------------+-------------------------------------+

*Note*:

In implementing this feature, MySQL uses what is sometimes referred to
as _implied Boolean logic_, in which

   * `+' stands for `AND'

   * `-' stands for `NOT'

   * [_no operator_] implies `OR'

Boolean full-text searches have these characteristics:

   * They do not use the 50% threshold.

   * They do not automatically sort rows in order of decreasing
     relevance. You can see this from the preceding query result: The
     row with the highest relevance is the one that contains `MySQL'
     twice, but it is listed last, not first.

   * They can work even without a `FULLTEXT' index, although a search
     executed in this fashion would be quite slow.

   * The minimum and maximum word length full-text parameters apply.

   * The stopword list applies.

The boolean full-text search capability supports the following
operators:

   * `+'

     A leading plus sign indicates that this word _must_ be present in
     each row that is returned.

   * `-'

     A leading minus sign indicates that this word must _not_ be
     present in any of the rows that are returned.

     Note: The `-' operator acts only to exclude rows that are
     otherwise matched by other search terms. Thus, a boolean-mode
     search that contains only terms preceded by `-' returns an empty
     result. It does not return `all rows except those containing any
     of the excluded terms.'

   * (no operator)

     By default (when neither `+' nor `-' is specified) the word is
     optional, but the rows that contain it are rated higher. This
     mimics the behavior of `MATCH() ...  AGAINST()' without the `IN
     BOOLEAN MODE' modifier.

   * `> <'

     These two operators are used to change a word's contribution to
     the relevance value that is assigned to a row. The `>' operator
     increases the contribution and the `<' operator decreases it. See
     the example following this list.

   * `( )'

     Parentheses group words into subexpressions. Parenthesized groups
     can be nested.

   * `~'

     A leading tilde acts as a negation operator, causing the word's
     contribution to the row's relevance to be negative.  This is
     useful for marking `noise' words. A row containing such a word is
     rated lower than others, but is not excluded altogether, as it
     would be with the `-' operator.

   * `*'

     The asterisk serves as the truncation (or wildcard) operator.
     Unlike the other operators, it should be _appended_ to the word to
     be affected.  Words match if they begin with the word preceding the
     `*' operator.

     If a word is specified with the truncation operator, it is not
     stripped from a boolean query, even if it is too short (as
     determined from the `ft_min_word_len' setting) or a stopword. This
     occurs because the word is not seen as too short or a stopword,
     but as a prefix that must be present in the document in the form
     of a word that begins with the prefix. Suppose that
     `ft_min_word_len=4'.  Then a search for `'+WORD +the*'' will
     likely return fewer rows than a search for `'+WORD +the'':

        * The former query remains as is and requires both WORD and
          `the*' (a word starting with `the') to be present in the
          document.

        * The latter query is transformed to `+WORD' (requiring only
          WORD to be present). `the' is both too short and a stopword,
          and either condition is enough to cause it to be ignored.

   * `"'

     A phrase that is enclosed within double quote (``"'') characters
     matches only rows that contain the phrase _literally, as it was
     typed_. The full-text engine splits the phrase into words and
     performs a search in the `FULLTEXT' index for the words. Nonword
     characters need not be matched exactly: Phrase searching requires
     only that matches contain exactly the same words as the phrase and
     in the same order. For example, `"test phrase"' matches `"test,
     phrase"'.

     If the phrase contains no words that are in the index, the result
     is empty. For example, if all words are either stopwords or
     shorter than the minimum length of indexed words, the result is
     empty.

The following examples demonstrate some search strings that use boolean
full-text operators:

   * `'apple banana''

     Find rows that contain at least one of the two words.

   * `'+apple +juice''

     Find rows that contain both words.

   * `'+apple macintosh''

     Find rows that contain the word `apple', but rank rows higher if
     they also contain `macintosh'.

   * `'+apple -macintosh''

     Find rows that contain the word `apple' but not `macintosh'.

   * `'+apple ~macintosh''

     Find rows that contain the word `apple', but if the row also
     contains the word `macintosh', rate it lower than if row does not.
     This is `softer' than a search for `'+apple -macintosh'', for
     which the presence of `macintosh' causes the row not to be returned
     at all.

   * `'+apple +(>turnover <strudel)''

     Find rows that contain the words `apple' and `turnover', or
     `apple' and `strudel' (in any order), but rank `apple turnover'
     higher than `apple strudel'.

   * `'apple*''

     Find rows that contain words such as `apple', `apples',
     `applesauce', or `applet'.

   * `'"some words"''

     Find rows that contain the exact phrase `some words' (for example,
     rows that contain `some words of wisdom' but not `some noise
     words'). Note that the ``"'' characters that enclose the phrase
     are operator characters that delimit the phrase.  They are not the
     quotation marks that enclose the search string itself.


File: manual.info,  Node: fulltext-query-expansion,  Next: fulltext-stopwords,  Prev: fulltext-boolean,  Up: fulltext-search

12.9.3 Full-Text Searches with Query Expansion
----------------------------------------------

Full-text search supports query expansion (and in particular, its
variant `blind query expansion'). This is generally useful when a
search phrase is too short, which often means that the user is relying
on implied knowledge that the full-text search engine lacks. For
example, a user searching for `database' may really mean that `MySQL',
`Oracle', `DB2', and `RDBMS' all are phrases that should match
`databases' and should be returned, too. This is implied knowledge.

Blind query expansion (also known as automatic relevance feedback) is
enabled by adding `WITH QUERY EXPANSION' or `IN NATURAL LANGUAGE MODE
WITH QUERY EXPANSION' following the search phrase. It works by
performing the search twice, where the search phrase for the second
search is the original search phrase concatenated with the few most
highly relevant documents from the first search.  Thus, if one of these
documents contains the word `databases' and the word `MySQL', the
second search finds the documents that contain the word `MySQL' even if
they do not contain the word `database'. The following example shows
this difference:

     mysql> SELECT * FROM articles
         -> WHERE MATCH (title,body)
         -> AGAINST ('database' IN NATURAL LANGUAGE MODE);
     +----+-------------------+------------------------------------------+
     | id | title             | body                                     |
     +----+-------------------+------------------------------------------+
     |  5 | MySQL vs. YourSQL | In the following database comparison ... |
     |  1 | MySQL Tutorial    | DBMS stands for DataBase ...             |
     +----+-------------------+------------------------------------------+
     2 rows in set (0.00 sec)

     mysql> SELECT * FROM articles
         -> WHERE MATCH (title,body)
         -> AGAINST ('database' WITH QUERY EXPANSION);
     +----+-------------------+------------------------------------------+
     | id | title             | body                                     |
     +----+-------------------+------------------------------------------+
     |  1 | MySQL Tutorial    | DBMS stands for DataBase ...             |
     |  5 | MySQL vs. YourSQL | In the following database comparison ... |
     |  3 | Optimizing MySQL  | In this tutorial we will show ...        |
     +----+-------------------+------------------------------------------+
     3 rows in set (0.00 sec)

Another example could be searching for books by Georges Simenon about
Maigret, when a user is not sure how to spell `Maigret'. A search for
`Megre and the reluctant witnesses' finds only `Maigret and the
Reluctant Witnesses' without query expansion. A search with query
expansion finds all books with the word `Maigret' on the second pass.

*Note*:

Because blind query expansion tends to increase noise significantly by
returning nonrelevant documents, it is meaningful to use only when a
search phrase is rather short.


File: manual.info,  Node: fulltext-stopwords,  Next: fulltext-restrictions,  Prev: fulltext-query-expansion,  Up: fulltext-search

12.9.4 Full-Text Stopwords
--------------------------

The stopword list is loaded and searched for full-text queries using
the server character set and collation (the values of the
`character_set_server' and `collation_server' system variables). False
hits or misses may occur for stopword lookups if the stopword file or
columns used for full-text indexing or searches have a character set or
collation different from `character_set_server' or `collation_server'.

Case sensitivity of stopword lookups depends on the server collation.
For example, lookups are case insensitive if the collation is
`latin1_swedish_ci', whereas lookups are case sensitive if the
collation is `latin1_general_cs' or `latin1_bin'.

As of MySQL 5.5.6, the stopword file is loaded and searched using
`latin1' if `character_set_server' is `ucs2', `utf16', or `utf32'. If
any table was created with `FULLTEXT' indexes while the server character
set was `ucs2', `utf16', or `utf32', it should be repaired using this
statement:

     REPAIR TABLE TBL_NAME QUICK;

The following table shows the default list of full-text stopwords. In a
MySQL source distribution, you can find this list in the
`storage/myisam/ft_static.c' file.

This table shows the default list of full-text stopwords. In a MySQL
source distribution, you can find this list in the `myisam/ft_static.c'
file. The table lists stopwords in alphabetical order when read from
left to right, row by row.

a's            able           about          above          according
accordingly    across         actually       after          afterwards
again          against        ain't          all            allow
allows         almost         alone          along          already
also           although       always         am             among
amongst        an             and            another        any
anybody        anyhow         anyone         anything       anyway
anyways        anywhere       apart          appear         appreciate
appropriate    are            aren't         around         as
aside          ask            asking         associated     at
available      away           awfully        be             became
because        become         becomes        becoming       been
before         beforehand     behind         being          believe
below          beside         besides        best           better
between        beyond         both           brief          but
by             c'mon          c's            came           can
can't          cannot         cant           cause          causes
certain        certainly      changes        clearly        co
com            come           comes          concerning     consequently
consider       considering    contain        containing     contains
corresponding  could          couldn't       course         currently
definitely     described      despite        did            didn't
different      do             does           doesn't        doing
don't          done           down           downwards      during
each           edu            eg             eight          either
else           elsewhere      enough         entirely       especially
et             etc            even           ever           every
everybody      everyone       everything     everywhere     ex
exactly        example        except         far            few
fifth          first          five           followed       following
follows        for            former         formerly       forth
four           from           further        furthermore    get
gets           getting        given          gives          go
goes           going          gone           got            gotten
greetings      had            hadn't         happens        hardly
has            hasn't         have           haven't        having
he             he's           hello          help           hence
her            here           here's         hereafter      hereby
herein         hereupon       hers           herself        hi
him            himself        his            hither         hopefully
how            howbeit        however        i'd            i'll
i'm            i've           ie             if             ignored
immediate      in             inasmuch       inc            indeed
indicate       indicated      indicates      inner          insofar
instead        into           inward         is             isn't
it             it'd           it'll          it's           its
itself         just           keep           keeps          kept
know           known          knows          last           lately
later          latter         latterly       least          less
lest           let            let's          like           liked
likely         little         look           looking        looks
ltd            mainly         many           may            maybe
me             mean           meanwhile      merely         might
more           moreover       most           mostly         much
must           my             myself         name           namely
nd             near           nearly         necessary      need
needs          neither        never          nevertheless   new
next           nine           no             nobody         non
none           noone          nor            normally       not
nothing        novel          now            nowhere        obviously
of             off            often          oh             ok
okay           old            on             once           one
ones           only           onto           or             other
others         otherwise      ought          our            ours
ourselves      out            outside        over           overall
own            particular     particularly   per            perhaps
placed         please         plus           possible       presumably
probably       provides       que            quite          qv
rather         rd             re             really         reasonably
regarding      regardless     regards        relatively     respectively
right          said           same           saw            say
saying         says           second         secondly       see
seeing         seem           seemed         seeming        seems
seen           self           selves         sensible       sent
serious        seriously      seven          several        shall
she            should         shouldn't      since          six
so             some           somebody       somehow        someone
something      sometime       sometimes      somewhat       somewhere
soon           sorry          specified      specify        specifying
still          sub            such           sup            sure
t's            take           taken          tell           tends
th             than           thank          thanks         thanx
that           that's         thats          the            their
theirs         them           themselves     then           thence
there          there's        thereafter     thereby        therefore
therein        theres         thereupon      these          they
they'd         they'll        they're        they've        think
third          this           thorough       thoroughly     those
though         three          through        throughout     thru
thus           to             together       too            took
toward         towards        tried          tries          truly
try            trying         twice          two            un
under          unfortunately  unless         unlikely       until
unto           up             upon           us             use
used           useful         uses           using          usually
value          various        very           via            viz
vs             want           wants          was            wasn't
way            we             we'd           we'll          we're
we've          welcome        well           went           were
weren't        what           what's         whatever       when
whence         whenever       where          where's        whereafter
whereas        whereby        wherein        whereupon      wherever
whether        which          while          whither        who
who's          whoever        whole          whom           whose
why            will           willing        wish           with
within         without        won't          wonder         would
wouldn't       yes            yet            you            you'd
you'll         you're         you've         your           yours
yourself       yourselves     zero                          


File: manual.info,  Node: fulltext-restrictions,  Next: fulltext-fine-tuning,  Prev: fulltext-stopwords,  Up: fulltext-search

12.9.5 Full-Text Restrictions
-----------------------------

   * Full-text searches are supported for `MyISAM' tables only. (In
     MySQL 5.6 and up, they can also be used with `InnoDB' tables.)

   * Full-text searches are not supported for partitioned tables.  See
     *Note partitioning-limitations::.

   * Full-text searches can be used with most multi-byte character
     sets. The exception is that for Unicode, the `utf8' character set
     can be used, but not the `ucs2' character set. However, although
     `FULLTEXT' indexes on `ucs2' columns cannot be used, you can
     perform `IN BOOLEAN MODE' searches on a `ucs2' column that has no
     such index.

     The remarks for `utf8' also apply to `utf8mb4', and the remarks for
     `ucs2' also apply to `utf16' and `utf32'.

   * Ideographic languages such as Chinese and Japanese do not have
     word delimiters. Therefore, the `FULLTEXT' parser _cannot
     determine where words begin and end in these and other such
     languages_. The implications of this and some workarounds for the
     problem are described in *Note fulltext-search::.

   * Although the use of multiple character sets within a single table
     is supported, all columns in a `FULLTEXT' index must use the same
     character set and collation.

   * The `MATCH()' column list must match exactly the column list in
     some `FULLTEXT' index definition for the table, unless this
     `MATCH()' is `IN BOOLEAN MODE'. Boolean-mode searches can be done
     on nonindexed columns, although they are likely to be slow.

   * The argument to `AGAINST()' must be a string value that is
     constant during query evaluation. This rules out, for example, a
     table column because that can differ for each row.

   * Index hints are more limited for `FULLTEXT' searches than for
     non-`FULLTEXT' searches.  See *Note index-hints::.


File: manual.info,  Node: fulltext-fine-tuning,  Next: full-text-adding-collation,  Prev: fulltext-restrictions,  Up: fulltext-search

12.9.6 Fine-Tuning MySQL Full-Text Search
-----------------------------------------

MySQL's full-text search capability has few user-tunable parameters.
You can exert more control over full-text searching behavior if you
have a MySQL source distribution because some changes require source
code modifications. See *Note source-installation::.

Note that full-text search is carefully tuned for the most
effectiveness. Modifying the default behavior in most cases can
actually decrease effectiveness. _Do not alter the MySQL sources unless
you know what you are doing_.

Most full-text variables described in this section must be set at
server startup time. A server restart is required to change them; they
cannot be modified while the server is running.

Some variable changes require that you rebuild the `FULLTEXT' indexes
in your tables. Instructions for doing so are given later in this
section.

   * The minimum and maximum lengths of words to be indexed are defined
     by the `ft_min_word_len' and `ft_max_word_len' system variables.
     (See *Note server-system-variables::.)  The default minimum value
     is four characters; the default maximum is version dependent. If
     you change either value, you must rebuild your `FULLTEXT' indexes.
     For example, if you want three-character words to be searchable,
     you can set the `ft_min_word_len' variable by putting the
     following lines in an option file:

          [mysqld]
          ft_min_word_len=3

     Then restart the server and rebuild your `FULLTEXT' indexes. Note
     particularly the remarks regarding *Note `myisamchk': myisamchk.
     in the instructions following this list.

   * To override the default stopword list, set the `ft_stopword_file'
     system variable. (See *Note server-system-variables::.)  The
     variable value should be the path name of the file containing the
     stopword list, or the empty string to disable stopword filtering.
     The server looks for the file in the data directory unless an
     absolute path name is given to specify a different directory.
     After changing the value of this variable or the contents of the
     stopword file, restart the server and rebuild your `FULLTEXT'
     indexes.

     The stopword list is free-form. That is, you may use any
     nonalphanumeric character such as newline, space, or comma to
     separate stopwords. Exceptions are the underscore character
     (``_'') and a single apostrophe (``''') which are treated as part
     of a word. The character set of the stopword list is the server's
     default character set; see *Note charset-server::.

   * The 50% threshold for natural language searches is determined by
     the particular weighting scheme chosen. To disable it, look for
     the following line in `storage/myisam/ftdefs.h':

          #define GWS_IN_USE GWS_PROB

     Change that line to this:

          #define GWS_IN_USE GWS_FREQ

     Then recompile MySQL. There is no need to rebuild the indexes in
     this case.

     *Note*:

     By making this change, you _severely_ decrease MySQL's ability to
     provide adequate relevance values for the `MATCH()' function. If
     you really need to search for such common words, it would be
     better to search using `IN BOOLEAN MODE' instead, which does not
     observe the 50% threshold.

   * To change the operators used for boolean full-text searches, set
     the `ft_boolean_syntax' system variable. This variable can be
     changed while the server is running, but you must have the `SUPER'
     privilege to do so. No rebuilding of indexes is necessary in this
     case. See *Note server-system-variables::, which describes the
     rules governing how to set this variable.

   * If you want to change the set of characters that are considered
     word characters, you can do so in several ways, as described in
     the following list. After making the modification, you must
     rebuild the indexes for each table that contains any `FULLTEXT'
     indexes.  Suppose that you want to treat the hyphen character
     ('-') as a word character. Use one of these methods:

        * Modify the MySQL source: In `storage/myisam/ftdefs.h', see the
          `true_word_char()' and `misc_word_char()' macros. Add `'-''
          to one of those macros and recompile MySQL.

        * Modify a character set file: This requires no recompilation.
          The `true_word_char()' macro uses a `character type' table to
          distinguish letters and numbers from other characters. .  You
          can edit the contents of the `<ctype><map>' array in one of
          the character set XML files to specify that `'-'' is a
          `letter.' Then use the given character set for your
          `FULLTEXT' indexes. For information about the `<ctype><map>'
          array format, see *Note character-arrays::.

        * Add a new collation for the character set used by the indexed
          columns, and alter the columns to use that collation. For
          general information about adding collations, see *Note
          adding-collation::. For an example specific to full-text
          indexing, see *Note full-text-adding-collation::.

If you modify full-text variables that affect indexing
(`ft_min_word_len', `ft_max_word_len', or `ft_stopword_file'), or if you
change the stopword file itself, you must rebuild your `FULLTEXT'
indexes after making the changes and restarting the server. To rebuild
the indexes in this case, it is sufficient to do a `QUICK' repair
operation:

     mysql> REPAIR TABLE TBL_NAME QUICK;

Alternatively, use *Note `ALTER TABLE': alter-table.  with the `DROP
INDEX' and `ADD INDEX' options to drop and re-create each `FULLTEXT'
index. In some cases, this may be faster than a repair operation.

Each table that contains any `FULLTEXT' index must be repaired as just
shown. Otherwise, queries for the table may yield incorrect results,
and modifications to the table will cause the server to see the table
as corrupt and in need of repair.

Note that if you use *Note `myisamchk': myisamchk. to perform an
operation that modifies table indexes (such as repair or analyze), the
`FULLTEXT' indexes are rebuilt using the _default_ full-text parameter
values for minimum word length, maximum word length, and stopword file
unless you specify otherwise. This can result in queries failing.

The problem occurs because these parameters are known only by the
server. They are not stored in `MyISAM' index files. To avoid the
problem if you have modified the minimum or maximum word length or
stopword file values used by the server, specify the same
`ft_min_word_len', `ft_max_word_len', and `ft_stopword_file' values for
*Note `myisamchk': myisamchk. that you use for *Note `mysqld': mysqld.
For example, if you have set the minimum word length to 3, you can
repair a table with *Note `myisamchk': myisamchk. like this:

     shell> myisamchk --recover --ft_min_word_len=3 TBL_NAME.MYI

To ensure that *Note `myisamchk': myisamchk. and the server use the
same values for full-text parameters, place each one in both the
`[mysqld]' and `[myisamchk]' sections of an option file:

     [mysqld]
     ft_min_word_len=3

     [myisamchk]
     ft_min_word_len=3

An alternative to using *Note `myisamchk': myisamchk. for index
modification is to use the *Note `REPAIR TABLE': repair-table, *Note
`ANALYZE TABLE': analyze-table, *Note `OPTIMIZE TABLE': optimize-table,
or *Note `ALTER TABLE': alter-table. statements. These statements are
performed by the server, which knows the proper full-text parameter
values to use.


File: manual.info,  Node: full-text-adding-collation,  Prev: fulltext-fine-tuning,  Up: fulltext-search

12.9.7 Adding a Collation for Full-Text Indexing
------------------------------------------------

This section describes how to add a new collation for full-text
searches. The sample collation is like `latin1_swedish_ci' but treats
the `'-'' character as a letter rather than as a punctuation character
so that it can be indexed as a word character. General information
about adding collations is given in *Note adding-collation::; it is
assumed that you have read it and are familiar with the files involved.

To add a collation for full-text indexing, use this procedure:

  1. Add a collation to the `Index.xml' file.  The collation ID must be
     unused, so choose a value different from 62 if that ID is already
     taken on your system.

          <charset name="latin1">
          ...
          <collation name="latin1_fulltext_ci" id="62"/>
          </charset>

  2. Declare the sort order for the collation in the `latin1.xml' file.
     In this case, the order can be copied from `latin1_swedish_ci':

          <collation name="latin1_fulltext_ci">
          <map>
          00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
          10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F
          20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F
          30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F
          40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F
          50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5D 5E 5F
          60 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F
          50 51 52 53 54 55 56 57 58 59 5A 7B 7C 7D 7E 7F
          80 81 82 83 84 85 86 87 88 89 8A 8B 8C 8D 8E 8F
          90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9E 9F
          A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF
          B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF
          41 41 41 41 5C 5B 5C 43 45 45 45 45 49 49 49 49
          44 4E 4F 4F 4F 4F 5D D7 D8 55 55 55 59 59 DE DF
          41 41 41 41 5C 5B 5C 43 45 45 45 45 49 49 49 49
          44 4E 4F 4F 4F 4F 5D F7 D8 55 55 55 59 59 DE FF
          </map>
          </collation>

  3. Modify the `ctype' array in `latin1.xml'. Change the value
     corresponding to 0x2D (which is the code for the `'-'' character)
     from 10 (punctuation) to 01 (small letter). In the following
     array, this is the element in the fourth row down, third value
     from the end.

          <ctype>
          <map>
          00
          20 20 20 20 20 20 20 20 20 28 28 28 28 28 20 20
          20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
          48 10 10 10 10 10 10 10 10 10 10 10 10 *01* 10 10
          84 84 84 84 84 84 84 84 84 84 10 10 10 10 10 10
          10 81 81 81 81 81 81 01 01 01 01 01 01 01 01 01
          01 01 01 01 01 01 01 01 01 01 01 10 10 10 10 10
          10 82 82 82 82 82 82 02 02 02 02 02 02 02 02 02
          02 02 02 02 02 02 02 02 02 02 02 10 10 10 10 20
          10 00 10 02 10 10 10 10 10 10 01 10 01 00 01 00
          00 10 10 10 10 10 10 10 10 10 02 10 02 00 02 01
          48 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
          10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
          01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
          01 01 01 01 01 01 01 10 01 01 01 01 01 01 01 02
          02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02
          02 02 02 02 02 02 02 10 02 02 02 02 02 02 02 02
          </map>
          </ctype>

  4. Restart the server.

  5. To employ the new collation, include it in the definition of
     columns that are to use it:

          mysql> DROP TABLE IF EXISTS t1;
          Query OK, 0 rows affected (0.13 sec)

          mysql> CREATE TABLE t1 (
              -> a TEXT CHARACTER SET latin1 COLLATE latin1_fulltext_ci,
              -> FULLTEXT INDEX(a)
              -> ) ENGINE=MyISAM;
          Query OK, 0 rows affected (0.47 sec)

  6. Test the collation to verify that hyphen is considered as a word
     character:

          mysql> INSERT INTO t1 VALUEs ('----'),('....'),('abcd');
          Query OK, 3 rows affected (0.22 sec)
          Records: 3  Duplicates: 0  Warnings: 0

          mysql> SELECT * FROM t1 WHERE MATCH a AGAINST ('----' IN BOOLEAN MODE);
          +------+
          | a    |
          +------+
          | ---- |
          +------+
          1 row in set (0.00 sec)


File: manual.info,  Node: cast-functions,  Next: xml-functions,  Prev: fulltext-search,  Up: functions

12.10 Cast Functions and Operators
==================================

*Cast Functions*

Name                          Description
`BINARY'                      Cast a string to a binary string
`CAST()'                      Cast a value as a certain type
`CONVERT()'                   Cast a value as a certain type

   *  `BINARY'

     The `BINARY' operator casts the string following it to a binary
     string. This is an easy way to force a column comparison to be
     done byte by byte rather than character by character. This causes
     the comparison to be case sensitive even if the column is not
     defined as *Note `BINARY': binary-varbinary. or *Note `BLOB': blob.
     `BINARY' also causes trailing spaces to be significant.

          mysql> SELECT 'a' = 'A';
                  -> 1
          mysql> SELECT BINARY 'a' = 'A';
                  -> 0
          mysql> SELECT 'a' = 'a ';
                  -> 1
          mysql> SELECT BINARY 'a' = 'a ';
                  -> 0

     In a comparison, `BINARY' affects the entire operation; it can be
     given before either operand with the same result.

     `BINARY STR' is shorthand for `CAST(STR AS BINARY)'.

     Note that in some contexts, if you cast an indexed column to
     `BINARY', MySQL is not able to use the index efficiently.

   *  `CAST(EXPR AS TYPE)'

     The `CAST()' function takes an expression of any type and produces
     a result value of a specified type, similar to `CONVERT()'. See
     the description of `CONVERT()' for more information.

   *  `CONVERT(EXPR,TYPE)', `CONVERT(EXPR USING TRANSCODING_NAME)'

     The `CONVERT()' and `CAST()' functions take an expression of any
     type and produce a result value of a specified type.

     The TYPE for the result can be one of the following values:

        * `BINARY[(N)]'

        * `CHAR[(N)]'

        * *Note `DATE': datetime.

        * *Note `DATETIME': datetime.

        * `DECIMAL[(M[,D])]'

        * `SIGNED [INTEGER]'

        * *Note `TIME': time.

        * `UNSIGNED [INTEGER]'

     *Note `BINARY': binary-varbinary. produces a string with the *Note
     `BINARY': binary-varbinary. data type. See *Note
     binary-varbinary:: for a description of how this affects
     comparisons. If the optional length N is given, `BINARY(N)' causes
     the cast to use no more than N bytes of the argument. Values
     shorter than N bytes are padded with `0x00' bytes to a length of N.

     `CHAR(N)' causes the cast to use no more than N characters of the
     argument.

     `CAST()' and `CONVERT(... USING ...)' are standard SQL syntax. The
     non-`USING' form of `CONVERT()' is ODBC syntax.

     `CONVERT()' with `USING' is used to convert data between different
     character sets. In MySQL, transcoding names are the same as the
     corresponding character set names. For example, this statement
     converts the string `'abc'' in the default character set to the
     corresponding string in the `utf8' character set:

          SELECT CONVERT('abc' USING utf8);

Normally, you cannot compare a *Note `BLOB': blob.  value or other
binary string in case-insensitive fashion because binary strings have
no character set, and thus no concept of lettercase. To perform a
case-insensitive comparison, use the `CONVERT()' function to convert the
value to a nonbinary string. Comparisons of the result use the string
collation. For example, if the character set of the result has a
case-insensitive collation, a `LIKE' operation is not case sensitive:

     SELECT 'A' LIKE CONVERT(BLOB_COL USING latin1) FROM TBL_NAME;

To use a different character set, substitute its name for `latin1' in
the preceding statement. To specify a particular collation for the
converted string, use a `COLLATE' clause following the `CONVERT()'
call, as described in *Note charset-convert::. For example, to use
`latin1_german1_ci':

     SELECT 'A' LIKE CONVERT(BLOB_COL USING latin1) COLLATE latin1_german1_ci
       FROM TBL_NAME;

`CONVERT()' can be used more generally for comparing strings that are
represented in different character sets.

`LOWER()' (and `UPPER()') are ineffective when applied to binary
strings (*Note `BINARY': binary-varbinary, *Note `VARBINARY':
binary-varbinary, *Note `BLOB': blob.). To perform lettercase
conversion, convert the string to a nonbinary string:

     mysql> SET @str = BINARY 'New York';
     mysql> SELECT LOWER(@str), LOWER(CONVERT(@str USING latin1));
     +-------------+-----------------------------------+
     | LOWER(@str) | LOWER(CONVERT(@str USING latin1)) |
     +-------------+-----------------------------------+
     | New York    | new york                          |
     +-------------+-----------------------------------+

The cast functions are useful when you want to create a column with a
specific type in a *Note `CREATE TABLE ... SELECT': create-table.
statement:

     CREATE TABLE new_table SELECT CAST('2000-01-01' AS DATE);

The functions also can be useful for sorting *Note `ENUM': enum.
columns in lexical order.  Normally, sorting of *Note `ENUM': enum.
columns occurs using the internal numeric values. Casting the values to
*Note `CHAR': char. results in a lexical sort:

     SELECT ENUM_COL FROM TBL_NAME ORDER BY CAST(ENUM_COL AS CHAR);

`CAST(STR AS BINARY)' is the same thing as `BINARY STR'.  `CAST(EXPR AS
CHAR)' treats the expression as a string with the default character set.

`CAST()' also changes the result if you use it as part of a more
complex expression such as `CONCAT('Date: ',CAST(NOW() AS DATE))'.

You should not use `CAST()' to extract data in different formats but
instead use string functions like `LEFT()' or `EXTRACT()'. See *Note
date-and-time-functions::.

To cast a string to a numeric value in numeric context, you normally do
not have to do anything other than to use the string value as though it
were a number:

     mysql> SELECT 1+'1';
            -> 2

If you use a string in an arithmetic operation, it is converted to a
floating-point number during expression evaluation.

If you use a number in string context, the number automatically is
converted to a string:

     mysql> SELECT CONCAT('hello you ',2);
             -> 'hello you 2'

For information about implicit conversion of numbers to strings, see
*Note type-conversion::.

MySQL supports arithmetic with both signed and unsigned 64-bit values.
If you are using numeric operators (such as `+' or `-') and one of the
operands is an unsigned integer, the result is unsigned by default (see
*Note arithmetic-functions::). You can override this by using the
`SIGNED' or `UNSIGNED' cast operator to cast a value to a signed or
unsigned 64-bit integer, respectively.

     mysql> SELECT CAST(1-2 AS UNSIGNED)
             -> 18446744073709551615
     mysql> SELECT CAST(CAST(1-2 AS UNSIGNED) AS SIGNED);
             -> -1

If either operand is a floating-point value, the result is a
floating-point value and is not affected by the preceding rule.  (In
this context, *Note `DECIMAL': fixed-point-types. column values are
regarded as floating-point values.)

     mysql> SELECT CAST(1 AS UNSIGNED) - 2.0;
             -> -1.0

The SQL mode affects the result of conversion operations.  Examples:

   * If you convert a `zero' date string to a date, `CONVERT()' and
     `CAST()' return `NULL' and produce a warning when the
     `NO_ZERO_DATE' SQL mode is enabled.

   * For integer subtraction, if the `NO_UNSIGNED_SUBTRACTION' SQL mode
     is enabled, the subtraction result is signed even if any operand
     is unsigned.

For more information, see *Note server-sql-mode::.


File: manual.info,  Node: xml-functions,  Next: bit-functions,  Prev: cast-functions,  Up: functions

12.11 XML Functions
===================

*XML Functions*

Name                          Description
`ExtractValue()'              Extracts a value from an XML string using
                              XPath notation
`UpdateXML()'                 Return replaced XML fragment

This section discusses XML and related functionality in MySQL.

*Note*:

It is possible to obtain XML-formatted output from MySQL in the *Note
`mysql': mysql. and *Note `mysqldump': mysqldump.  clients by invoking
them with the `--xml' option. See *Note mysql::, and *Note mysqldump::.

Two functions providing basic XPath 1.0 (XML Path Language, version
1.0) capabilities are available. Some basic information about XPath
syntax and usage is provided later in this section; however, an
in-depth discussion of these topics is beyond the scope of this Manual,
and you should refer to the XML Path Language (XPath) 1.0 standard
(http://www.w3.org/TR/xpath) for definitive information. A useful
resource for those new to XPath or who desire a refresher in the basics
is the Zvon.org XPath Tutorial
(http://www.zvon.org/xxl/XPathTutorial/), which is available in several
languages.

*Note*:

These functions remain under development. We continue to improve these
and other aspects of XML and XPath functionality in MySQL 5.5 and
onwards. You may discuss these, ask questions about them, and obtain
help from other users with them in the MySQL XML User Forum
(http://forums.mysql.com/list.php?44).

XPath expressions used with these functions support user variables and
local stored program variables. User variables are weakly checked;
variables local to stored programs are strongly checked (see also Bug
#26518):

   * User variables (weak checking)

     Variables using the syntax `$@VARIABLE_NAME' (that is, user
     variables) are not checked. No warnings or errors are issued by
     the server if a variable has the wrong type or has previously not
     been assigned a value. This also means the user is fully
     responsible for any typographical errors, since no warnings will
     be given if (for example) `$@myvariable' is used where
     `$@myvariable' was intended.

     Example:

          mysql> SET @xml = '<a><b>X</b><b>Y</b></a>';
          Query OK, 0 rows affected (0.00 sec)

          mysql> SET @i =1, @j = 2;
          Query OK, 0 rows affected (0.00 sec)

          mysql> SELECT @i, ExtractValue(@xml, '//b[$@i]');
          +------+--------------------------------+
          | @i   | ExtractValue(@xml, '//b[$@i]') |
          +------+--------------------------------+
          |    1 | X                              |
          +------+--------------------------------+
          1 row in set (0.00 sec)

          mysql> SELECT @j, ExtractValue(@xml, '//b[$@j]');
          +------+--------------------------------+
          | @j   | ExtractValue(@xml, '//b[$@j]') |
          +------+--------------------------------+
          |    2 | Y                              |
          +------+--------------------------------+
          1 row in set (0.00 sec)

          mysql> SELECT @k, ExtractValue(@xml, '//b[$@k]');
          +------+--------------------------------+
          | @k   | ExtractValue(@xml, '//b[$@k]') |
          +------+--------------------------------+
          | NULL |                                |
          +------+--------------------------------+
          1 row in set (0.00 sec)

   * Variables in stored programs (strong checking)

     Variables using the syntax `$VARIABLE_NAME' can be declared and
     used with these functions when they are called inside stored
     programs. Such variables are local to the stored program in which
     they are defined, and are strongly checked for type and value.

     Example:

          mysql> DELIMITER |

          mysql> CREATE PROCEDURE myproc ()
              -> BEGIN
              ->   DECLARE i INT DEFAULT 1;
              ->   DECLARE xml VARCHAR(25) DEFAULT '<a>X</a><a>Y</a><a>Z</a>';
              ->
              ->   WHILE i < 4 DO
              ->     SELECT xml, i, ExtractValue(xml, '//a[$i]');
              ->     SET i = i+1;
              ->   END WHILE;
              -> END |
          Query OK, 0 rows affected (0.01 sec)

          mysql> DELIMITER ;

          mysql> CALL myproc;
          +--------------------------+---+------------------------------+
          | xml                      | i | ExtractValue(xml, '//a[$i]') |
          +--------------------------+---+------------------------------+
          | <a>X</a><a>Y</a><a>Z</a> | 1 | X                            |
          +--------------------------+---+------------------------------+
          1 row in set (0.00 sec)

          +--------------------------+---+------------------------------+
          | xml                      | i | ExtractValue(xml, '//a[$i]') |
          +--------------------------+---+------------------------------+
          | <a>X</a><a>Y</a><a>Z</a> | 2 | Y                            |
          +--------------------------+---+------------------------------+
          1 row in set (0.01 sec)

          +--------------------------+---+------------------------------+
          | xml                      | i | ExtractValue(xml, '//a[$i]') |
          +--------------------------+---+------------------------------+
          | <a>X</a><a>Y</a><a>Z</a> | 3 | Z                            |
          +--------------------------+---+------------------------------+
          1 row in set (0.01 sec)

     Parameters

     Variables used in XPath expressions inside stored routines that
     are passed in as parameters are also subject to strong checking.

Expressions containing user variables or variables local to stored
programs must otherwise (except for notation) conform to the rules for
XPath expressions containing variables as given in the XPath 1.0
specification.

*Note*:

Currently, a user variable used to store an XPath expression is treated
as an empty string. Because of this, it is not possible to store an
XPath expression as a user variable. (Bug #32911)

   *  `ExtractValue(XML_FRAG, XPATH_EXPR)'

     `ExtractValue()' takes two string arguments, a fragment of XML
     markup XML_FRAG and an XPath expression XPATH_EXPR (also known as a
     _locator_); it returns the text (`CDATA') of the first text node
     which is a child of the elements or elements matched by the XPath
     expression. In MySQL 5.5, the XPath expression can contain at most
     127 characters. (This limitation is lifted in MySQL 5.6.)

     Using this function is the equivalent of performing a match using
     the XPATH_EXPR after appending `/text()'. In other words,
     `ExtractValue('<a><b>Sakila</b></a>', '/a/b')' and
     `ExtractValue('<a><b>Sakila</b></a>', '/a/b/text()')' produce the
     same result.

     If multiple matches are found, the content of the first child text
     node of each matching element is returned (in the order matched)
     as a single, space-delimited string.

     If no matching text node is found for the expression (including
     the implicit `/text()')--for whatever reason, as long as
     XPATH_EXPR is valid, and XML_FRAG consists of elements which are
     properly nested and closed--an empty string is returned. No
     distinction is made between a match on an empty element and no
     match at all. This is by design.

     If you need to determine whether no matching element was found in
     XML_FRAG or such an element was found but contained no child text
     nodes, you should test the result of an expression that uses the
     XPath `count()' function. For example, both of these statements
     return an empty string, as shown here:

          mysql> SELECT ExtractValue('<a><b/></a>', '/a/b');
          +-------------------------------------+
          | ExtractValue('<a><b/></a>', '/a/b') |
          +-------------------------------------+
          |                                     |
          +-------------------------------------+
          1 row in set (0.00 sec)

          mysql> SELECT ExtractValue('<a><c/></a>', '/a/b');
          +-------------------------------------+
          | ExtractValue('<a><c/></a>', '/a/b') |
          +-------------------------------------+
          |                                     |
          +-------------------------------------+
          1 row in set (0.00 sec)

     However, you can determine whether there was actually a matching
     element using the following:

          mysql> SELECT ExtractValue('<a><b/></a>', 'count(/a/b)');
          +-------------------------------------+
          | ExtractValue('<a><b/></a>', 'count(/a/b)') |
          +-------------------------------------+
          | 1                                   |
          +-------------------------------------+
          1 row in set (0.00 sec)

          mysql> SELECT ExtractValue('<a><c/></a>', 'count(/a/b)');
          +-------------------------------------+
          | ExtractValue('<a><c/></a>', 'count(/a/b)') |
          +-------------------------------------+
          | 0                                   |
          +-------------------------------------+
          1 row in set (0.01 sec)

     *Important*:

     `ExtractValue()' returns only `CDATA', and does not return any
     tags that might be contained within a matching tag, nor any of
     their content (see the result returned as `val1' in the following
     example).

          mysql> SELECT
              ->   ExtractValue('<a>ccc<b>ddd</b></a>', '/a') AS val1,
              ->   ExtractValue('<a>ccc<b>ddd</b></a>', '/a/b') AS val2,
              ->   ExtractValue('<a>ccc<b>ddd</b></a>', '//b') AS val3,
              ->   ExtractValue('<a>ccc<b>ddd</b></a>', '/b') AS val4,
              ->   ExtractValue('<a>ccc<b>ddd</b><b>eee</b></a>', '//b') AS val5;

          +------+------+------+------+---------+
          | val1 | val2 | val3 | val4 | val5    |
          +------+------+------+------+---------+
          | ccc  | ddd  | ddd  |      | ddd eee |
          +------+------+------+------+---------+

     This function uses the current SQL collation for making
     comparisons with `contains()', performing the same collation
     aggregation as other string functions (such as `CONCAT()'), in
     taking into account the collation coercibility of their arguments;
     see *Note charset-collation-expressions::, for an explanation of
     the rules governing this behavior.

     (Previously, binary--that is, case-sensitive--comparison was
     always used.)

     `NULL' is returned if XML_FRAG contains elements which are not
     properly nested or closed, and a warning is generated, as shown in
     this example:

          mysql> SELECT ExtractValue('<a>c</a><b', '//a');
          +-----------------------------------+
          | ExtractValue('<a>c</a><b', '//a') |
          +-----------------------------------+
          | NULL                              |
          +-----------------------------------+
          1 row in set, 1 warning (0.00 sec)

          mysql> SHOW WARNINGS;
          +---------+------+-------------------------------------------------------------------------------------------+
          | Level   | Code | Message                                                                                   |
          +---------+------+-------------------------------------------------------------------------------------------+
          | Warning | 1523 | Incorrect XML value: 'parse error at line 1 pos 11: END-OF-INPUT unexpected ('>' wanted)' |
          +---------+------+-------------------------------------------------------------------------------------------+
          1 row in set (0.00 sec)

          mysql> SELECT ExtractValue('<a>c</a><b/>', '//a');
          +-------------------------------------+
          | ExtractValue('<a>c</a><b/>', '//a') |
          +-------------------------------------+
          | c                                   |
          +-------------------------------------+
          1 row in set (0.00 sec)

   *  `UpdateXML(XML_TARGET, XPATH_EXPR, NEW_XML)'

     This function replaces a single portion of a given fragment of XML
     markup XML_TARGET with a new XML fragment NEW_XML, and then
     returns the changed XML. The portion of XML_TARGET that is
     replaced matches an XPath expression XPATH_EXPR supplied by the
     user. In MySQL 5.5, the XPath expression can contain at most 127
     characters. (This limitation is lifted in MySQL 5.6.)

     If no expression matching XPATH_EXPR is found, or if multiple
     matches are found, the function returns the original XML_TARGET
     XML fragment. All three arguments should be strings.

          mysql> SELECT
              ->   UpdateXML('<a><b>ccc</b><d></d></a>', '/a', '<e>fff</e>') AS val1,
              ->   UpdateXML('<a><b>ccc</b><d></d></a>', '/b', '<e>fff</e>') AS val2,
              ->   UpdateXML('<a><b>ccc</b><d></d></a>', '//b', '<e>fff</e>') AS val3,
              ->   UpdateXML('<a><b>ccc</b><d></d></a>', '/a/d', '<e>fff</e>') AS val4,
              ->   UpdateXML('<a><d></d><b>ccc</b><d></d></a>', '/a/d', '<e>fff</e>') AS val5
              -> \G

          *************************** 1. row ***************************
          val1: <e>fff</e>
          val2: <a><b>ccc</b><d></d></a>
          val3: <a><e>fff</e><d></d></a>
          val4: <a><b>ccc</b><e>fff</e></a>
          val5: <a><d></d><b>ccc</b><d></d></a>

*Note*:

A discussion in depth of XPath syntax and usage are beyond the scope of
this Manual. Please see the XML Path Language (XPath) 1.0 specification
(http://www.w3.org/TR/xpath) for definitive information. A useful
resource for those new to XPath or who are wishing a refresher in the
basics is the Zvon.org XPath Tutorial
(http://www.zvon.org/xxl/XPathTutorial/), which is available in several
languages.

Descriptions and examples of some basic XPath expressions follow:

   * `/TAG'

     Matches `<TAG/>' if and only if `<TAG/>' is the root element.

     Example: `/a' has a match in `<a><b/></a>' because it matches the
     outermost (root) tag. It does not match the inner A element in
     `<b><a/></b>' because in this instance it is the child of another
     element.

   * `/TAG1/TAG2'

     Matches `<TAG2/>' if and only if it is a child of `<TAG1/>', and
     `<TAG1/>' is the root element.

     Example: `/a/b' matches the B element in the XML fragment
     `<a><b/></a>' because it is a child of the root element A. It does
     not have a match in `<b><a/></b>' because in this case, B is the
     root element (and hence the child of no other element). Nor does
     the XPath expression have a match in `<a><c><b/></c></a>'; here, B
     is a descendant of A, but not actually a child of A.

     This construct is extendable to three or more elements. For
     example, the XPath expression `/a/b/c' matches the C element in the
     fragment `<a><b><c/></b></a>'.

   * `//TAG'

     Matches any instance of `<TAG>'.

     Example: `//a' matches the A element in any of the following:
     `<a><b><c/></b></a>'; `<c><a><b/></a></b>'; `<c><b><a/></b></c>'.

     `//' can be combined with `/'. For example, `//a/b' matches the B
     element in either of the fragments `<a><b/></a>' or
     `<a><b><c/></b></a>'

     *Note*:

     `//TAG' is the equivalent of `/descendant-or-self::*/TAG'.  A
     common error is to confuse this with `/descendant-or-self::TAG',
     although the latter expression can actually lead to very different
     results, as can be seen here:

          mysql> SET @xml = '<a><b><c>w</c><b>x</b><d>y</d>z</b></a>';
          Query OK, 0 rows affected (0.00 sec)

          mysql> SELECT @xml;
          +-----------------------------------------+
          | @xml                                    |
          +-----------------------------------------+
          | <a><b><c>w</c><b>x</b><d>y</d>z</b></a> |
          +-----------------------------------------+
          1 row in set (0.00 sec)

          mysql> SELECT ExtractValue(@xml, '//b[1]');
          +------------------------------+
          | ExtractValue(@xml, '//b[1]') |
          +------------------------------+
          | x z                          |
          +------------------------------+
          1 row in set (0.00 sec)

          mysql> SELECT ExtractValue(@xml, '//b[2]');
          +------------------------------+
          | ExtractValue(@xml, '//b[2]') |
          +------------------------------+
          |                              |
          +------------------------------+
          1 row in set (0.01 sec)

          mysql> SELECT ExtractValue(@xml, '/descendant-or-self::*/b[1]');
          +---------------------------------------------------+
          | ExtractValue(@xml, '/descendant-or-self::*/b[1]') |
          +---------------------------------------------------+
          | x z                                               |
          +---------------------------------------------------+
          1 row in set (0.06 sec)

          mysql> SELECT ExtractValue(@xml, '/descendant-or-self::*/b[2]');
          +---------------------------------------------------+
          | ExtractValue(@xml, '/descendant-or-self::*/b[2]') |
          +---------------------------------------------------+
          |                                                   |
          +---------------------------------------------------+
          1 row in set (0.00 sec)

          mysql> SELECT ExtractValue(@xml, '/descendant-or-self::b[1]');
          +-------------------------------------------------+
          | ExtractValue(@xml, '/descendant-or-self::b[1]') |
          +-------------------------------------------------+
          | z                                               |
          +-------------------------------------------------+
          1 row in set (0.00 sec)

          mysql> SELECT ExtractValue(@xml, '/descendant-or-self::b[2]');
          +-------------------------------------------------+
          | ExtractValue(@xml, '/descendant-or-self::b[2]') |
          +-------------------------------------------------+
          | x                                               |
          +-------------------------------------------------+
          1 row in set (0.00 sec)

   * The `*' operator acts as a `wildcard' that matches any element.
     For example, the expression `/*/b' matches the B element in either
     of the XML fragments `<a><b/></a>' or `<c><b/></c>'. However, the
     expression does not produce a match in the fragment `<b><a/></b>'
     because B must be a child of some other element. The wildcard may
     be used in any position: The expression `/*/b/*' will match any
     child of a B element that is itself not the root element.

   * You can match any of several locators using the `|' (*Note
     `UNION': union.)  operator. For example, the expression `//b|//c'
     matches all B and C elements in the XML target.

   * It is also possible to match an element based on the value of one
     or more of its attributes. This done using the syntax
     `TAG[@ATTRIBUTE="VALUE"]'.  For example, the expression
     `//b[@id="idB"]' matches the second B element in the fragment
     `<a><b id="idA"/><c/><b id="idB"/></a>'. To match against _any_
     element having `ATTRIBUTE="VALUE"', use the XPath expression
     `//*[ATTRIBUTE="VALUE"]'.

     To filter multiple attribute values, simply use multiple
     attribute-comparison clauses in succession. For example, the
     expression `//b[@c="x"][@d="y"]' matches the element `<b c="x"
     d="y"/>' occurring anywhere in a given XML fragment.

     To find elements for which the same attribute matches any of
     several values, you can use multiple locators joined by the `|'
     operator. For example, to match all B elements whose C attributes
     have either of the values 23 or 17, use the expression
     `//b[@c="23"]|//b[@c="17"]'. You can also use the logical `or'
     operator for this purpose: `//b[@c="23" or @c="17"]'.

     *Note*:

     The difference between `or' and `|' is that `or' joins conditions,
     while `|' joins result sets.

XPath Limitations

The XPath syntax supported by these functions is currently subject to
the following limitations:

   * Nodeset-to-nodeset comparison (such as `'/a/b[@c=@d]'') is not
     supported.

   * All of the standard XPath comparison operators are supported.
     (Bug #22823)

   * Relative locator expressions are resolved in the context of the
     root node. For example, consider the following query and result:

          mysql> SELECT ExtractValue(
              ->   '<a><b c="1">X</b><b c="2">Y</b></a>',
              ->    'a/b'
              -> ) AS result;
          +--------+
          | result |
          +--------+
          | X Y    |
          +--------+
          1 row in set (0.03 sec)

     In this case, the locator `a/b' resolves to `/a/b'.

     Relative locators are also supported within predicates. In the
     following example, `d[../@c="1"]' is resolved as `/a/b[@c="1"]/d':

          mysql> SELECT ExtractValue(
              ->      '<a>
              ->        <b c="1"><d>X</d></b>
              ->        <b c="2"><d>X</d></b>
              ->      </a>',
              ->      'a/b/d[../@c="1"]')
              -> AS result;
          +--------+
          | result |
          +--------+
          | X      |
          +--------+
          1 row in set (0.00 sec)

   * Locators prefixed with expressions that evaluate as scalar
     values--including variable references, literals, numbers, and
     scalar function calls--are not permitted, and their use results in
     an error.

   * The `::' operator is not supported in combination with node types
     such as the following:

        * `AXIS::comment()'

        * `AXIS::text()'

        * `AXIS::processing-instructions()'

        * `AXIS::node()'

     However, name tests (such as `AXIS::NAME' and `AXIS::*') are
     supported, as shown in these examples:

          mysql> SELECT ExtractValue('<a><b>x</b><c>y</c></a>','/a/child::b');
          +-------------------------------------------------------+
          | ExtractValue('<a><b>x</b><c>y</c></a>','/a/child::b') |
          +-------------------------------------------------------+
          | x                                                     |
          +-------------------------------------------------------+
          1 row in set (0.02 sec)

          mysql> SELECT ExtractValue('<a><b>x</b><c>y</c></a>','/a/child::*');
          +-------------------------------------------------------+
          | ExtractValue('<a><b>x</b><c>y</c></a>','/a/child::*') |
          +-------------------------------------------------------+
          | x y                                                   |
          +-------------------------------------------------------+
          1 row in set (0.01 sec)

   * `Up-and-down' navigation is not supported in cases where the path
     would lead `above' the root element. That is, you cannot use
     expressions which match on descendants of ancestors of a given
     element, where one or more of the ancestors of the current element
     is also an ancestor of the root element (see Bug #16321).

   * The following XPath functions are not supported, or have known
     issues as indicated:

        * `id()'

        * `lang()'

        * `local-name()'

        * `name()'

        * `namespace-uri()'

        * `normalize-space()'

        * `starts-with()'

        * `string()'

        * `substring-after()'

        * `substring-before()'

        * `translate()'

   * The following axes are not supported:

        * `following-sibling'

        * `following'

        * `preceding-sibling'

        * `preceding'

XPath expressions passed as arguments to `ExtractValue()' and
`UpdateXML()' may contain the colon character (``:'') in element
selectors, which enables their use with markup employing XML namespaces
notation. For example:

     mysql> SET @xml = '<a>111<b:c>222<d>333</d><e:f>444</e:f></b:c></a>';
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT ExtractValue(@xml, '//e:f');
     +-----------------------------+
     | ExtractValue(@xml, '//e:f') |
     +-----------------------------+
     | 444                         |
     +-----------------------------+
     1 row in set (0.00 sec)

     mysql> SELECT UpdateXML(@xml, '//b:c', '<g:h>555</g:h>');
     +--------------------------------------------+
     | UpdateXML(@xml, '//b:c', '<g:h>555</g:h>') |
     +--------------------------------------------+
     | <a>111<g:h>555</g:h></a>                   |
     +--------------------------------------------+
     1 row in set (0.00 sec)

This is similar in some respects to what is permitted by Apache Xalan
(http://xalan.apache.org/) and some other parsers, and is much simpler
than requiring namespace declarations or the use of the
`namespace-uri()' and `local-name()' functions.

Error handling

For both `ExtractValue()' and `UpdateXML()', the XPath locator used
must be valid and the XML to be searched must consist of elements which
are properly nested and closed. If the locator is invalid, an error is
generated:

     mysql> SELECT ExtractValue('<a>c</a><b/>', '/&a');
     `ERROR 1105 (HY000): XPATH syntax error: '&a''

If XML_FRAG does not consist of elements which are properly nested and
closed, `NULL' is returned and a warning is generated, as shown in this
example:

     mysql> SELECT ExtractValue('<a>c</a><b', '//a');
     +-----------------------------------+
     | ExtractValue('<a>c</a><b', '//a') |
     +-----------------------------------+
     | NULL                              |
     +-----------------------------------+
     1 row in set, 1 warning (0.00 sec)

     mysql> SHOW WARNINGS;
     +---------+------+-------------------------------------------------------------------------------------------+
     | Level   | Code | Message                                                                                   |
     +---------+------+-------------------------------------------------------------------------------------------+
     | Warning | 1523 | Incorrect XML value: 'parse error at line 1 pos 11: END-OF-INPUT unexpected ('>' wanted)' |
     +---------+------+-------------------------------------------------------------------------------------------+
     1 row in set (0.00 sec)

     mysql> SELECT ExtractValue('<a>c</a><b/>', '//a');
     +-------------------------------------+
     | ExtractValue('<a>c</a><b/>', '//a') |
     +-------------------------------------+
     | c                                   |
     +-------------------------------------+
     1 row in set (0.00 sec)

*Important*:

The replacement XML used as the third argument to `UpdateXML()' is
_not_ checked to determine whether it consists solely of elements which
are properly nested and closed.

XPath Injection

_code injection_ occurs when malicious code is introduced into the
system to gain unauthorized access to privileges and data. It is based
on exploiting assumptions made by developers about the type and content
of data input from users. XPath is no exception in this regard.

A common scenario in which this can happen is the case of application
which handles authorization by matching the combination of a login name
and password with those found in an XML file, using an XPath expression
like this one:

     //user[login/text()='neapolitan' and password/text()='1c3cr34m']/attribute::id

This is the XPath equivalent of an SQL statement like this one:

     SELECT id FROM users WHERE login='neapolitan' AND password='1c3cr34m';

A PHP application employing XPath might handle the login process like
this:

     <?php

       $file     =   "users.xml";

       $login    =   $POST["login"];
       $password =   $POST["password"];

       $xpath = "//user[login/text()=$login and password/text()=$password]/attribute::id";

       if( file_exists($file) )
       {
         $xml = simplexml_load_file($file);

         if($result = $xml->xpath($xpath))
           echo "You are now logged in as user $result[0].";
         else
           echo "Invalid login name or password.";
       }
       else
         exit("Failed to open $file.");

     ?>

No checks are performed on the input. This means that a malevolent user
can `short-circuit' the test by entering `' or 1=1' for both the login
name and password, resulting in $xpath being evaluated as shown here:

     //user[login/text()='' or 1=1 and password/text()='' or 1=1]/attribute::id

Since the expression inside the square brackets always evaluates as
`true', it is effectively the same as this one, which matches the `id'
attribute of every `user' element in the XML document:

     //user/attribute::id

One way in which this particular attack can be circumvented is simply
by quoting the variable names to be interpolated in the definition of
`$xpath', forcing the values passed from a Web form to be converted to
strings:

     $xpath = "//user[login/text()='$login' and password/text()='$password']/attribute::id";

This is the same strategy that is often recommended for preventing SQL
injection attacks. In general, the practices you should follow for
preventing XPath injection attacks are the same as for preventing SQL
injection:

   * Never accepted untested data from users in your application.

   * Check all user-submitted data for type; reject or convert data
     that is of the wrong type

   * Test numeric data for out of range values; truncate, round, or
     reject values that are out of range. Test strings for illegal
     characters and either strip them out or reject input containing
     them.

   * Do not output explicit error messages that might provide an
     unauthorized user with clues that could be used to compromise the
     system; log these to a file or database table instead.

Just as SQL injection attacks can be used to obtain information about
database schemas, so can XPath injection be used to traverse XML files
to uncover their structure, as discussed in Amit Klein's paper Blind
XPath Injection
(http://www.packetstormsecurity.org/papers/bypass/Blind_XPath_Injection_20040518.pdf)
(PDF file, 46KB).

It is also important to check the output being sent back to the client.
Consider what can happen when we use the MySQL `ExtractValue()'
function:

     mysql> SELECT ExtractValue(
         ->     LOAD_FILE('users.xml'),
         ->     '//user[login/text()="" or 1=1 and password/text()="" or 1=1]/attribute::id'
         -> ) AS id;
     +-------------------------------+
     | id                            |
     +-------------------------------+
     | 00327 13579 02403 42354 28570 |
     +-------------------------------+
     1 row in set (0.01 sec)

Because `ExtractValue()' returns multiple matches as a single
space-delimited string, this injection attack provides every valid ID
contained within `users.xml' to the user as a single row of output. As
an extra safeguard, you should also test output before returning it to
the user. Here is a simple example:

     mysql> SELECT @id = ExtractValue(
         ->     LOAD_FILE('users.xml'),
         ->     '//user[login/text()="" or 1=1 and password/text()="" or 1=1]/attribute::id'
         -> );
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT IF(
         ->     INSTR(@id, ' ') = 0,
         ->     @id,
         ->     'Unable to retrieve user ID')
         -> AS singleID;
     +----------------------------+
     | singleID                   |
     +----------------------------+
     | Unable to retrieve user ID |
     +----------------------------+
     1 row in set (0.00 sec)

In general, the guidelines for returning data to users securely are the
same as for accepting user input. These can be summed up as:

   * Always test outgoing data for type and permissible values.

   * Never permit unauthorized users to view error messages that might
     provide information about the application that could be used to
     exploit it.


File: manual.info,  Node: bit-functions,  Next: encryption-functions,  Prev: xml-functions,  Up: functions

12.12 Bit Functions
===================

*Bitwise Functions*

Name                          Description
`BIT_COUNT()'                 Return the number of bits that are set
`&'                           Bitwise AND
`~'                           Invert bits
`|'                           Bitwise OR
`^'                           Bitwise XOR
`<<'                          Left shift
`>>'                          Right shift

MySQL uses *Note `BIGINT': integer-types. (64-bit) arithmetic for bit
operations, so these operators have a maximum range of 64 bits.

   *  `|'

     Bitwise OR:

          mysql> SELECT 29 | 15;
                  -> 31

     The result is an unsigned 64-bit integer.

   *  `&'

     Bitwise AND:

          mysql> SELECT 29 & 15;
                  -> 13

     The result is an unsigned 64-bit integer.

   *  `^'

     Bitwise XOR:

          mysql> SELECT 1 ^ 1;
                  -> 0
          mysql> SELECT 1 ^ 0;
                  -> 1
          mysql> SELECT 11 ^ 3;
                  -> 8

     The result is an unsigned 64-bit integer.

   *  `<<'

     Shifts a longlong (*Note `BIGINT': integer-types.)  number to the
     left.

          mysql> SELECT 1 << 2;
                  -> 4

     The result is an unsigned 64-bit integer. The value is truncated
     to 64 bits. In particular, if the shift count is greater or equal
     to the width of an unsigned 64-bit number, the result is zero.

   *  `>>'

     Shifts a longlong (*Note `BIGINT': integer-types.)  number to the
     right.

          mysql> SELECT 4 >> 2;
                  -> 1

     The result is an unsigned 64-bit integer. The value is truncated
     to 64 bits. In particular, if the shift count is greater or equal
     to the width of an unsigned 64-bit number, the result is zero.

   *  `~'

     Invert all bits.

          mysql> SELECT 5 & ~1;
                  -> 4

     The result is an unsigned 64-bit integer.

   *  `BIT_COUNT(N)'

     Returns the number of bits that are set in the argument N.

          mysql> SELECT BIT_COUNT(29), BIT_COUNT(b'101010');
                  -> 4, 3


File: manual.info,  Node: encryption-functions,  Next: information-functions,  Prev: bit-functions,  Up: functions

12.13 Encryption and Compression Functions
==========================================

*Encryption Functions*

Name                          Description
`AES_DECRYPT()'               Decrypt using AES
`AES_ENCRYPT()'               Encrypt using AES
`COMPRESS()'                  Return result as a binary string
`DECODE()'                    Decodes a string encrypted using ENCODE()
`DES_DECRYPT()'               Decrypt a string
`DES_ENCRYPT()'               Encrypt a string
`ENCODE()'                    Encode a string
`ENCRYPT()'                   Encrypt a string
`MD5()'                       Calculate MD5 checksum
`OLD_PASSWORD()'              Return the value of the  pre-4.1
                              implementation of PASSWORD
`PASSWORD()'                  Calculate and return a password string
`SHA1()', `SHA()'             Calculate an SHA-1 160-bit checksum
`SHA2()'                      Calculate an SHA-2 checksum
`UNCOMPRESS()'                Uncompress a string compressed
`UNCOMPRESSED_LENGTH()'       Return the length of a string before
                              compression

Many encryption and compression functions return strings for which the
result might contain arbitrary byte values. If you want to store these
results, use a column with a *Note `VARBINARY': binary-varbinary. or
*Note `BLOB': blob. binary string data type. This will avoid potential
problems with trailing space removal or character set conversion that
would change data values, such as may occur if you use a nonbinary
string data type (*Note `CHAR': char, *Note `VARCHAR': char, *Note
`TEXT': blob.).

Some encryption functions return strings of ASCII characters: `MD5()',
`OLD_PASSWORD()', `PASSWORD()', `SHA()', `SHA1()'. As of MySQL 5.5.3,
their return value is a nonbinary string that has a character set and
collation determined by the `character_set_connection' and
`collation_connection' system variables. Before 5.5.3, these functions
return binary strings.  The same change was made for `SHA2()' in MySQL
5.5.6.

For versions in which functions such as `MD5()' or `SHA1()' return a
string of hex digits as a binary string, the return value cannot be
converted to uppercase or compared in case-insensitive fashion as is.
You must convert the value to a nonbinary string. See the discussion of
binary string conversion in *Note cast-functions::.

If an application stores values from a function such as `MD5()' or
`SHA1()' that returns a string of hex digits, more efficient storage
and comparisons can be obtained by converting the hex representation to
binary using `UNHEX()' and storing the result in a *Note `BINARY(N)':
binary-varbinary.  column. Each pair of hex digits requires one byte in
binary form, so the value of N depends on the length of the hex string.
N is 16 for an `MD5()' value and 20 for a `SHA1()' value. For `SHA2()',
N ranges from 28 to 32 depending on the argument specifying the desired
bit length of the result.

The size penalty for storing the hex string in a *Note `CHAR': char.
column is at least two times, up to eight times if the value is stored
in a column that uses the `utf8' character set (where each character
uses 4 bytes). Storing the string also results in slower comparisons
because of the larger values and the need to take character set
collation rules into account.

Suppose that an application stores `MD5()' string values in a *Note
`CHAR(32)': char. column:

     CREATE TABLE md5_tbl (md5_val CHAR(32), ...);
     INSERT INTO md5_tbl (md5_val, ...) VALUES(MD5('abcdef'), ...);

To convert hex strings to more compact form, modify the application to
use `UNHEX()' and *Note `BINARY(16)': binary-varbinary. instead as
follows:

     CREATE TABLE md5_tbl (md5_val BINARY(16), ...);
     INSERT INTO md5_tbl (md5_val, ...) VALUES(UNHEX(MD5('abcdef')), ...);

Applications should be prepared to handle the very rare case that a
hashing function produces the same value for two different input
values. One way to make collisions detectable is to make the hash
column a primary key.

*Note*:

Exploits for the MD5 and SHA-1 algorithms have become known. You may
wish to consider using one of the other encryption functions described
in this section instead, such as `SHA2()'.

*Caution*:

Passwords or other sensitive values supplied as arguments to encryption
functions are sent in plaintext to the MySQL server unless an SSL
connection is used. Also, such values will appear in any MySQL logs to
which they are written. To avoid these types of exposure, applications
can encrypt sensitive values on the client side before sending them to
the server. The same considerations apply to encryption keys. To avoid
exposing these, applications can use stored procedures to encrypt and
decrypt values on the server side.

   *  `AES_DECRYPT(CRYPT_STR,KEY_STR)'

     This function decrypts data using the official AES (Advanced
     Encryption Standard) algorithm. For more information, see the
     description of `AES_ENCRYPT()'.

   *  `AES_ENCRYPT(STR,KEY_STR)'

     `AES_ENCRYPT()' and `AES_DECRYPT()' implement encryption and
     decryption of data using the official AES (Advanced Encryption
     Standard) algorithm, previously known as `Rijndael.' The AES
     standard allows various key sizes. These functions implement AES
     with a 128-bit key length, but you can extend them to 256 bits by
     modifying the source. The key length is a trade off between
     performance and security.

     `AES_ENCRYPT()' encrypts the string STR using a key KEY_STR and
     returns a binary string containing the encrypted output.
     `AES_DECRYPT()' decrypts the encrypted string CRYPT_STR using a
     key KEY_STR and returns the original plaintext string. If either
     argument is `NULL', the results of these functions are also `NULL'.

     The STR and CRYPT_STR arguments can be any length, and padding is
     automatically added to STR so it is a multiple of a block as
     required by block-based algorithms such as AES. This padding is
     automatically removed by the `AES_DECRYPT()' function. The length
     of CRYPT_STR can be calculated using this formula:

          16 * (trunc(STRING_LENGTH / 16) + 1)

     The most secure way to pass a key to the KEY_STR argument is to
     create a truly random 128-bit value and pass it as a binary value.
     For example:

          INSERT INTO t
          VALUES (1,AES_ENCRYPT('text',UNHEX('F3229A0B371ED2D9441B830D21A390C3')));

     A passphrase can be used to generate an AES key by hashing the
     passphrase. For example:

          INSERT INTO t VALUES (1,AES_ENCRYPT('text', SHA2('My secret passphrase',512)));

     Do not pass a password or passphrase directly to CRYPT_STR, hash
     it first. Previous versions of this documentation suggested the
     former approach, but it is no longer recommended as the examples
     shown here are more secure.

     If `AES_DECRYPT()' detects invalid data or incorrect padding, it
     returns `NULL'. However, it is possible for `AES_DECRYPT()' to
     return a non-`NULL' value (possibly garbage) if the input data or
     the key is invalid.

   *  `COMPRESS(STRING_TO_COMPRESS)'

     Compresses a string and returns the result as a binary string.
     This function requires MySQL to have been compiled with a
     compression library such as `zlib'.  Otherwise, the return value
     is always `NULL'.  The compressed string can be uncompressed with
     `UNCOMPRESS()'.

          mysql> SELECT LENGTH(COMPRESS(REPEAT('a',1000)));
                  -> 21
          mysql> SELECT LENGTH(COMPRESS(''));
                  -> 0
          mysql> SELECT LENGTH(COMPRESS('a'));
                  -> 13
          mysql> SELECT LENGTH(COMPRESS(REPEAT('a',16)));
                  -> 15

     The compressed string contents are stored the following way:

        * Empty strings are stored as empty strings.

        * Nonempty strings are stored as a 4-byte length of the
          uncompressed string (low byte first), followed by the
          compressed string. If the string ends with space, an extra
          ``.'' character is added to avoid problems with endspace
          trimming should the result be stored in a *Note `CHAR': char.
          or *Note `VARCHAR': char. column. (However, use of nonbinary
          string data types such as *Note `CHAR': char. or *Note
          `VARCHAR': char. to store compressed strings is not
          recommended anyway because character set conversion may
          occur. Use a *Note `VARBINARY': binary-varbinary. or *Note
          `BLOB': blob. binary string column instead.)

   *  `DECODE(CRYPT_STR,PASS_STR)'

     Decrypts the encrypted string CRYPT_STR using PASS_STR as the
     password.  CRYPT_STR should be a string returned from `ENCODE()'.

   *  `DES_DECRYPT(CRYPT_STR[,KEY_STR])'

     Decrypts a string encrypted with `DES_ENCRYPT()'. If an error
     occurs, this function returns `NULL'.

     This function works only if MySQL has been configured with SSL
     support. See *Note ssl-connections::.

     If no KEY_STR argument is given, `DES_DECRYPT()' examines the
     first byte of the encrypted string to determine the DES key number
     that was used to encrypt the original string, and then reads the
     key from the DES key file to decrypt the message.  For this to
     work, the user must have the `SUPER' privilege. The key file can
     be specified with the `--des-key-file' server option.

     If you pass this function a KEY_STR argument, that string is used
     as the key for decrypting the message.

     If the CRYPT_STR argument does not appear to be an encrypted
     string, MySQL returns the given CRYPT_STR.

   *  `DES_ENCRYPT(STR[,{KEY_NUM|KEY_STR}])'

     Encrypts the string with the given key using the Triple-DES
     algorithm.

     This function works only if MySQL has been configured with SSL
     support. See *Note ssl-connections::.

     The encryption key to use is chosen based on the second argument
     to `DES_ENCRYPT()', if one was given. With no argument, the first
     key from the DES key file is used. With a KEY_NUM argument, the
     given key number (0 to 9) from the DES key file is used. With a
     KEY_STR argument, the given key string is used to encrypt STR.

     The key file can be specified with the `--des-key-file' server
     option.

     The return string is a binary string where the first character is
     `CHAR(128 | KEY_NUM)'. If an error occurs, `DES_ENCRYPT()' returns
     `NULL'.

     The 128 is added to make it easier to recognize an encrypted key.
     If you use a string key, KEY_NUM is 127.

     The string length for the result is given by this formula:

          NEW_LEN = ORIG_LEN + (8 - (ORIG_LEN % 8)) + 1

     Each line in the DES key file has the following format:

          KEY_NUM DES_KEY_STR

     Each KEY_NUM value must be a number in the range from `0' to `9'.
     Lines in the file may be in any order.  DES_KEY_STR is the string
     that is used to encrypt the message. There should be at least one
     space between the number and the key. The first key is the default
     key that is used if you do not specify any key argument to
     `DES_ENCRYPT()'.

     You can tell MySQL to read new key values from the key file with
     the *Note `FLUSH DES_KEY_FILE': flush. statement. This requires the
     `RELOAD' privilege.

     One benefit of having a set of default keys is that it gives
     applications a way to check for the existence of encrypted column
     values, without giving the end user the right to decrypt those
     values.

          mysql> SELECT customer_address FROM customer_table
               > WHERE crypted_credit_card = DES_ENCRYPT('credit_card_number');

   *  `ENCODE(STR,PASS_STR)'

     Encrypt STR using PASS_STR as the password. The result is a binary
     string of the same length as STR. To decrypt the result, use
     `DECODE()'.

     The `ENCODE()' function should no longer be used. If you still
     need to use `ENCODE()', a salt value must be used with it to
     reduce risk. For example:

          ENCODE('plaintext', CONCAT('my_random_salt','my_secret_password'))

     A new random salt value must be used whenever a password is
     updated.

   *  `ENCRYPT(STR[,SALT])'

     Encrypts STR using the Unix `crypt()' system call and returns a
     binary string. The SALT argument must be a string with at least
     two characters or the result will be `NULL'. If no SALT argument
     is given, a random value is used.

          mysql> SELECT ENCRYPT('hello');
                  -> 'VxuFAJXVARROc'

     `ENCRYPT()' ignores all but the first eight characters of STR, at
     least on some systems. This behavior is determined by the
     implementation of the underlying `crypt()' system call.

     The use of `ENCRYPT()' with the `ucs2', `utf16', or `utf32'
     multi-byte character sets is not recommended because the system
     call expects a string terminated by a zero byte.

     If `crypt()' is not available on your system (as is the case with
     Windows), `ENCRYPT()' always returns `NULL'.

   *  `MD5(STR)'

     Calculates an MD5 128-bit checksum for the string. The value is
     returned as a string of 32 hex digits, or `NULL' if the argument
     was `NULL'. The return value can, for example, be used as a hash
     key. See the notes at the beginning of this section about storing
     hash values efficiently.

     As of MySQL 5.5.3, the return value is a nonbinary string in the
     connection character set. Before 5.5.3, the return value is a
     binary string; see the notes at the beginning of this section
     about using the value as a nonbinary string.

          mysql> SELECT MD5('testing');
                  -> 'ae2b1fca515949e5d54fb22b8ed95575'

     This is the `RSA Data Security, Inc. MD5 Message-Digest Algorithm.'

     See the note regarding the MD5 algorithm at the beginning this
     section.

   *  `OLD_PASSWORD(STR)'

     `OLD_PASSWORD()' was added when the implementation of `PASSWORD()'
     was changed in MySQL 4.1 to improve security.  `OLD_PASSWORD()'
     returns the value of the pre-4.1 implementation of `PASSWORD()' as
     a string, and is intended to permit you to reset passwords for any
     pre-4.1 clients that need to connect to your version 5.5 MySQL
     server without locking them out. See *Note password-hashing::.

     As of MySQL 5.5.3, the return value is a nonbinary string in the
     connection character set. Before 5.5.3, the return value is a
     binary string.

     *Note*:

     Passwords that use the pre-4.1 hashing method are less secure than
     passwords that use the native password hashing method and should
     be avoided.

   *  `PASSWORD(STR)'

     Calculates and returns a hashed password string from the plaintext
     password STR and returns a nonbinary string in the connection
     character set (a binary string before MySQL 5.5.3), or `NULL' if
     the argument is `NULL'. This function is the SQL interface to the
     algorithm used by the server to encrypt MySQL passwords for
     storage in the `mysql.user' grant table.

     The `old_passwords' system variable controls the password hashing
     method used by `PASSWORD()' (as well as for the `IDENTIFIED BY'
     clause of the *Note `CREATE USER': create-user. and *Note `GRANT':
     grant. statements).

     The following table shows the permitted values of `old_passwords',
     the password hashing method for each value, and which
     authentication plugins use passwords hashed with each method.

     The following table shows the permitted values of `old_passwords',
     the password hashing method for each value, and which
     authentication plugins use passwords hashed with each method.

     Value   Password Hashing  Intended Use
             Format            
     `0' or  MySQL 4.1 native  Accounts that authenticate with the
     `OFF'   hashing           `mysql_native_password' plugin
     `1' or  Pre-4.1 (`old')   Accounts that authenticate with the
     `ON'    hashing           `mysql_old_password' plugin

     If `old_passwords=1', `PASSWORD('STR')' returns the same value as
     `OLD_PASSWORD('STR')'.  The latter function is not affected by the
     value of `old_passwords'.

     Examples:

          mysql> SET old_passwords = 0;
          mysql> SELECT PASSWORD('mypass');
          +-------------------------------------------+
          | PASSWORD('mypass')                        |
          +-------------------------------------------+
          | *6C8989366EAF75BB670AD8EA7A7FC1176A95CEF4 |
          +-------------------------------------------+

          mysql> SET old_passwords = 1;
          mysql> SELECT PASSWORD('mypass');
          +--------------------+
          | PASSWORD('mypass') |
          +--------------------+
          | 6f8c114b58f2ce9e   |
          +--------------------+

     Encryption performed by `PASSWORD()' is one-way (not reversible).
     It is not the same type of encryption as used for Unix passwords;
     for that, use `ENCRYPT()'.

     *Note*:

     The `PASSWORD()' function is used by the authentication system in
     MySQL Server; you should _not_ use it in your own applications.
     For that purpose, consider `MD5()' or `SHA2()' instead. Also see
     section 2 (Challenge-Response Authentication Mechanism (CRAM)),
     for more information about handling passwords and authentication
     securely in your applications.

     *Note*:

     Passwords that use the pre-4.1 hashing method are less secure than
     passwords that use the native password hashing method and should
     be avoided.

     *Caution*:

     Statements that invoke `PASSWORD()' may be recorded in server logs
     or in a history file such as `~/.mysql_history', which means that
     cleartext passwords may be read by anyone having read access to
     that information. See *Note password-security::.

   *  `SHA1(STR)', `SHA(STR)'

     Calculates an SHA-1 160-bit checksum for the string, as described
     in RFC 3174 (Secure Hash Algorithm). The value is returned as a
     string of 40 hex digits, or `NULL' if the argument was `NULL'. One
     of the possible uses for this function is as a hash key. See the
     notes at the beginning of this section about storing hash values
     efficiently. You can also use `SHA1()' as a cryptographic function
     for storing passwords.  `SHA()' is synonymous with `SHA1()'.

     As of MySQL 5.5.3, the return value is a nonbinary string in the
     connection character set. Before 5.5.3, the return value is a
     binary string; see the notes at the beginning of this section
     about using the value as a nonbinary string.

          mysql> SELECT SHA1('abc');
                  -> 'a9993e364706816aba3e25717850c26c9cd0d89d'

     `SHA1()' can be considered a cryptographically more secure
     equivalent of `MD5()'. However, see the note regarding the MD5 and
     SHA-1 algorithms at the beginning this section.

   *  `SHA2(STR, HASH_LENGTH)'

     Calculates the SHA-2 family of hash functions (SHA-224, SHA-256,
     SHA-384, and SHA-512). The first argument is the cleartext string
     to be hashed. The second argument indicates the desired bit length
     of the result, which must have a value of 224, 256, 384, 512, or 0
     (which is equivalent to 256). If either argument is `NULL' or the
     hash length is not one of the permitted values, the return value is
     `NULL'. Otherwise, the function result is a hash value containing
     the desired number of bits. See the notes at the beginning of this
     section about storing hash values efficiently.

     As of MySQL 5.5.6, the return value is a nonbinary string in the
     connection character set. Before 5.5.6, the return value is a
     binary string; see the notes at the beginning of this section
     about using the value as a nonbinary string.

          mysql> SELECT SHA2('abc', 224);
                  -> '23097d223405d8228642a477bda255b32aadbce4bda0b3f7e36c9da7'

     This function works only if MySQL has been configured with SSL
     support. See *Note ssl-connections::.

     `SHA2()' can be considered cryptographically more secure than
     `MD5()' or `SHA1()'.

     `SHA2()' was added in MySQL 5.5.5.

   *  `UNCOMPRESS(STRING_TO_UNCOMPRESS)'

     Uncompresses a string compressed by the `COMPRESS()' function. If
     the argument is not a compressed value, the result is `NULL'. This
     function requires MySQL to have been compiled with a compression
     library such as `zlib'. Otherwise, the return value is always
     `NULL'.

          mysql> SELECT UNCOMPRESS(COMPRESS('any string'));
                  -> 'any string'
          mysql> SELECT UNCOMPRESS('any string');
                  -> NULL

   *  `UNCOMPRESSED_LENGTH(COMPRESSED_STRING)'

     Returns the length that the compressed string had before being
     compressed.

          mysql> SELECT UNCOMPRESSED_LENGTH(COMPRESS(REPEAT('a',30)));
                  -> 30


File: manual.info,  Node: information-functions,  Next: miscellaneous-functions,  Prev: encryption-functions,  Up: functions

12.14 Information Functions
===========================

*Information Functions*

Name                          Description
`BENCHMARK()'                 Repeatedly execute an expression
`CHARSET()'                   Return the character set of the argument
`COERCIBILITY()'              Return the collation coercibility value of
                              the string  argument
`COLLATION()'                 Return the collation of the string argument
`CONNECTION_ID()'             Return the connection ID (thread ID)  for
                              the connection
`CURRENT_USER()',             The authenticated user name and host name
`CURRENT_USER'                
`DATABASE()'                  Return the default (current) database name
`FOUND_ROWS()'                For a SELECT with a LIMIT clause, the
                              number of rows that would be returned were
                              there no LIMIT clause
`LAST_INSERT_ID()'            Value of the AUTOINCREMENT column  for the
                              last INSERT
`ROW_COUNT()'                 The number of rows  updated
`SCHEMA()'                    A synonym for DATABASE()
`SESSION_USER()'              Synonym for USER()
`SYSTEM_USER()'               Synonym for USER()
`USER()'                      The user name and host name provided by
                              the client
`VERSION()'                   Returns a string that indicates the MySQL
                              server version

   *  `BENCHMARK(COUNT,EXPR)'

     The `BENCHMARK()' function executes the expression EXPR repeatedly
     COUNT times. It may be used to time how quickly MySQL processes
     the expression. The result value is always `0'. The intended use
     is from within the *Note `mysql': mysql. client, which reports
     query execution times:

          mysql> SELECT BENCHMARK(1000000,ENCODE('hello','goodbye'));
          +----------------------------------------------+
          | BENCHMARK(1000000,ENCODE('hello','goodbye')) |
          +----------------------------------------------+
          |                                            0 |
          +----------------------------------------------+
          1 row in set (4.74 sec)

     The time reported is elapsed time on the client end, not CPU time
     on the server end. It is advisable to execute `BENCHMARK()'
     several times, and to interpret the result with regard to how
     heavily loaded the server machine is.

     `BENCHMARK()' is intended for measuring the runtime performance of
     scalar expressions, which has some significant implications for
     the way that you use it and interpret the results:

        * Only scalar expressions can be used. Although the expression
          can be a subquery, it must return a single column and at most
          a single row. For example, `BENCHMARK(10, (SELECT * FROM t))'
          will fail if the table `t' has more than one column or more
          than one row.

        * Executing a `SELECT EXPR' statement N times differs from
          executing `SELECT BENCHMARK(N, EXPR)' in terms of the amount
          of overhead involved. The two have very different execution
          profiles and you should not expect them to take the same
          amount of time. The former involves the parser, optimizer,
          table locking, and runtime evaluation N times each. The latter
          involves only runtime evaluation N times, and all the other
          components just once. Memory structures already allocated are
          reused, and runtime optimizations such as local caching of
          results already evaluated for aggregate functions can alter
          the results. Use of `BENCHMARK()' thus measures performance
          of the runtime component by giving more weight to that
          component and removing the `noise' introduced by the network,
          parser, optimizer, and so forth.

   *  `CHARSET(STR)'

     Returns the character set of the string argument.

          mysql> SELECT CHARSET('abc');
                  -> 'latin1'
          mysql> SELECT CHARSET(CONVERT('abc' USING utf8));
                  -> 'utf8'
          mysql> SELECT CHARSET(USER());
                  -> 'utf8'

   *  `COERCIBILITY(STR)'

     Returns the collation coercibility value of the string argument.

          mysql> SELECT COERCIBILITY('abc' COLLATE latin1_swedish_ci);
                  -> 0
          mysql> SELECT COERCIBILITY(USER());
                  -> 3
          mysql> SELECT COERCIBILITY('abc');
                  -> 4

     The return values have the meanings shown in the following table.
     Lower values have higher precedence.

     This table lists collation coercibility return values, the meaning
     of each value, and provides an example of each.

     CoercibilityMeaning    Example
     `0'        Explicit   Value with `COLLATE' clause
                collation  
     `1'        No         Concatenation of strings with different
                collation  collations
     `2'        Implicit   Column value, stored routine parameter or
                collation  local variable
     `3'        System     `USER()' return value
                constant   
     `4'        Coercible  Literal string
     `5'        Ignorable  `NULL' or an expression derived from `NULL'

   *  `COLLATION(STR)'

     Returns the collation of the string argument.

          mysql> SELECT COLLATION('abc');
                  -> 'latin1_swedish_ci'
          mysql> SELECT COLLATION(_utf8'abc');
                  -> 'utf8_general_ci'

   *  `CONNECTION_ID()'

     Returns the connection ID (thread ID) for the connection.  Every
     connection has an ID that is unique among the set of currently
     connected clients.

          mysql> SELECT CONNECTION_ID();
                  -> 23786

   *  `CURRENT_USER', `CURRENT_USER()'

     Returns the user name and host name combination for the MySQL
     account that the server used to authenticate the current client.
     This account determines your access privileges. The return value
     is a string in the `utf8' character set.

     The value of `CURRENT_USER()' can differ from the value of
     `USER()'.

          mysql> SELECT USER();
                  -> 'davida@localhost'
          mysql> SELECT * FROM mysql.user;
          ERROR 1044: Access denied for user ''@'localhost' to
          database 'mysql'
          mysql> SELECT CURRENT_USER();
                  -> '@localhost'

     The example illustrates that although the client specified a user
     name of `davida' (as indicated by the value of the `USER()'
     function), the server authenticated the client using an anonymous
     user account (as seen by the empty user name part of the
     `CURRENT_USER()' value). One way this might occur is that there is
     no account listed in the grant tables for `davida'.

     Within a stored program or view, `CURRENT_USER()' returns the
     account for the user who defined the object (as given by its
     `DEFINER' value) unless defined with the `SQL SECURITY INVOKER'
     characteristic. In the latter case, `CURRENT_USER()' returns the
     object's invoker.

     Triggers and events have no option to define the `SQL SECURITY'
     characteristic, so for these objects, `CURRENT_USER()' returns the
     account for the user who defined the object. To return the
     invoker, use `USER()' or `SESSION_USER()'.

     The following statements support use of the `CURRENT_USER()'
     function to take the place of the name of (and, possibly, a host
     for) an affected user or a definer; in such cases,
     `CURRENT_USER()' is expanded where and as needed:

        * *Note `DROP USER': drop-user.

        * *Note `RENAME USER': rename-user.

        * *Note `GRANT': grant.

        * *Note `REVOKE': revoke.

        * *Note `CREATE FUNCTION': create-function.

        * *Note `CREATE PROCEDURE': create-procedure.

        * *Note `CREATE TRIGGER': create-trigger.

        * *Note `CREATE EVENT': create-event.

        * *Note `CREATE VIEW': create-view.

        * *Note `ALTER EVENT': alter-event.

        * *Note `ALTER VIEW': alter-view.

        * *Note `SET PASSWORD': set-password.

     For information about the implications that this expansion of
     `CURRENT_USER()' has for replication in different releases of
     MySQL 5.5, see *Note replication-features-current-user::.

   *  `DATABASE()'

     Returns the default (current) database name as a string in the
     `utf8' character set. If there is no default database,
     `DATABASE()' returns `NULL'. Within a stored routine, the default
     database is the database that the routine is associated with,
     which is not necessarily the same as the database that is the
     default in the calling context.

          mysql> SELECT DATABASE();
                  -> 'test'

     If there is no default database, `DATABASE()' returns `NULL'.

   *  `FOUND_ROWS()'

     A *Note `SELECT': select. statement may include a `LIMIT' clause
     to restrict the number of rows the server returns to the client.
     In some cases, it is desirable to know how many rows the statement
     would have returned without the `LIMIT', but without running the
     statement again. To obtain this row count, include a
     `SQL_CALC_FOUND_ROWS' option in the *Note `SELECT': select.
     statement, and then invoke `FOUND_ROWS()' afterward:

          mysql> SELECT SQL_CALC_FOUND_ROWS * FROM TBL_NAME
              -> WHERE id > 100 LIMIT 10;
          mysql> SELECT FOUND_ROWS();

     The second *Note `SELECT': select. returns a number indicating how
     many rows the first *Note `SELECT': select. would have returned had
     it been written without the `LIMIT' clause.

     In the absence of the `SQL_CALC_FOUND_ROWS' option in the most
     recent successful *Note `SELECT': select. statement,
     `FOUND_ROWS()' returns the number of rows in the result set
     returned by that statement. If the statement includes a `LIMIT'
     clause, `FOUND_ROWS()' returns the number of rows up to the limit.
     For example, `FOUND_ROWS()' returns 10 or 60, respectively, if the
     statement includes `LIMIT 10' or `LIMIT 50, 10'.

     The row count available through `FOUND_ROWS()' is transient and
     not intended to be available past the statement following the
     `SELECT SQL_CALC_FOUND_ROWS' statement. If you need to refer to
     the value later, save it:

          mysql> SELECT SQL_CALC_FOUND_ROWS * FROM ... ;
          mysql> SET @rows = FOUND_ROWS();

     If you are using `SELECT SQL_CALC_FOUND_ROWS', MySQL must
     calculate how many rows are in the full result set. However, this
     is faster than running the query again without `LIMIT', because
     the result set need not be sent to the client.

     `SQL_CALC_FOUND_ROWS' and `FOUND_ROWS()' can be useful in
     situations when you want to restrict the number of rows that a
     query returns, but also determine the number of rows in the full
     result set without running the query again. An example is a Web
     script that presents a paged display containing links to the pages
     that show other sections of a search result. Using `FOUND_ROWS()'
     enables you to determine how many other pages are needed for the
     rest of the result.

     The use of `SQL_CALC_FOUND_ROWS' and `FOUND_ROWS()' is more complex
     for *Note `UNION': union. statements than for simple *Note
     `SELECT': select. statements, because `LIMIT' may occur at
     multiple places in a *Note `UNION': union. It may be applied to
     individual *Note `SELECT': select. statements in the *Note
     `UNION': union, or global to the *Note `UNION': union. result as a
     whole.

     The intent of `SQL_CALC_FOUND_ROWS' for *Note `UNION': union. is
     that it should return the row count that would be returned without
     a global `LIMIT'. The conditions for use of `SQL_CALC_FOUND_ROWS'
     with *Note `UNION': union. are:

        * The `SQL_CALC_FOUND_ROWS' keyword must appear in the first
          *Note `SELECT': select.  of the *Note `UNION': union.

        * The value of `FOUND_ROWS()' is exact only if *Note `UNION
          ALL': union.  is used. If *Note `UNION': union. without `ALL'
          is used, duplicate removal occurs and the value of
          `FOUND_ROWS()' is only approximate.

        * If no `LIMIT' is present in the *Note `UNION': union,
          `SQL_CALC_FOUND_ROWS' is ignored and returns the number of
          rows in the temporary table that is created to process the
          *Note `UNION': union.

     Beyond the cases described here, the behavior of `FOUND_ROWS()' is
     undefined (for example, its value following a *Note `SELECT':
     select. statement that fails with an error).

     *Important*:

     `FOUND_ROWS()' is not replicated reliably using statement-based
     replication. This function is automatically replicated using
     row-based replication.

   *  `LAST_INSERT_ID()', `LAST_INSERT_ID(EXPR)'

     With no argument, `LAST_INSERT_ID()' returns a 64-bit value
     representing the first automatically generated value successfully
     inserted for an `AUTO_INCREMENT' column as a result of the most
     recently executed *Note `INSERT': insert.  statement. The value
     has a type of `BIGINT UNSIGNED' as of MySQL 5.5.29, `BIGINT'
     (signed) before that. The value of `LAST_INSERT_ID()' remains
     unchanged if no rows are successfully inserted.

     With an argument, `LAST_INSERT_ID()' returns an unsigned integer
     as of MySQL 5.5.29, a signed integer before that.

     For example, after inserting a row that generates an
     `AUTO_INCREMENT' value, you can get the value like this:

          mysql> SELECT LAST_INSERT_ID();
                  -> 195

     The currently executing statement does not affect the value of
     `LAST_INSERT_ID()'. Suppose that you generate an `AUTO_INCREMENT'
     value with one statement, and then refer to `LAST_INSERT_ID()' in a
     multiple-row *Note `INSERT': insert. statement that inserts rows
     into a table with its own `AUTO_INCREMENT' column. The value of
     `LAST_INSERT_ID()' will remain stable in the second statement; its
     value for the second and later rows is not affected by the earlier
     row insertions.  (However, if you mix references to
     `LAST_INSERT_ID()' and `LAST_INSERT_ID(EXPR)', the effect is
     undefined.)

     If the previous statement returned an error, the value of
     `LAST_INSERT_ID()' is undefined.  For transactional tables, if the
     statement is rolled back due to an error, the value of
     `LAST_INSERT_ID()' is left undefined. For manual *Note `ROLLBACK':
     commit, the value of `LAST_INSERT_ID()' is not restored to that
     before the transaction; it remains as it was at the point of the
     *Note `ROLLBACK': commit.

     Within the body of a stored routine (procedure or function) or a
     trigger, the value of `LAST_INSERT_ID()' changes the same way as
     for statements executed outside the body of these kinds of
     objects. The effect of a stored routine or trigger upon the value
     of `LAST_INSERT_ID()' that is seen by following statements depends
     on the kind of routine:

        * If a stored procedure executes statements that change the
          value of `LAST_INSERT_ID()', the changed value is seen by
          statements that follow the procedure call.

        * For stored functions and triggers that change the value, the
          value is restored when the function or trigger ends, so
          following statements will not see a changed value.

     The ID that was generated is maintained in the server on a
     _per-connection basis_. This means that the value returned by the
     function to a given client is the first `AUTO_INCREMENT' value
     generated for most recent statement affecting an `AUTO_INCREMENT'
     column _by that client_. This value cannot be affected by other
     clients, even if they generate `AUTO_INCREMENT' values of their
     own. This behavior ensures that each client can retrieve its own ID
     without concern for the activity of other clients, and without the
     need for locks or transactions.

     The value of `LAST_INSERT_ID()' is not changed if you set the
     `AUTO_INCREMENT' column of a row to a non-`magic' value (that is,
     a value that is not `NULL' and not `0').

     *Important*:

     If you insert multiple rows using a single *Note `INSERT': insert.
     statement, `LAST_INSERT_ID()' returns the value generated for the
     _first_ inserted row _only_. The reason for this is to make it
     possible to reproduce easily the same *Note `INSERT': insert.
     statement against some other server.

     For example:

          mysql> USE test;
          Database changed
          mysql> CREATE TABLE t (
              ->   id INT AUTO_INCREMENT NOT NULL PRIMARY KEY,
              ->   name VARCHAR(10) NOT NULL
              -> );
          Query OK, 0 rows affected (0.09 sec)

          mysql> INSERT INTO t VALUES (NULL, 'Bob');
          Query OK, 1 row affected (0.01 sec)

          mysql> SELECT * FROM t;
          +----+------+
          | id | name |
          +----+------+
          |  1 | Bob  |
          +----+------+
          1 row in set (0.01 sec)

          mysql> SELECT LAST_INSERT_ID();
          +------------------+
          | LAST_INSERT_ID() |
          +------------------+
          |                1 |
          +------------------+
          1 row in set (0.00 sec)

          mysql> INSERT INTO t VALUES
              -> (NULL, 'Mary'), (NULL, 'Jane'), (NULL, 'Lisa');
          Query OK, 3 rows affected (0.00 sec)
          Records: 3  Duplicates: 0  Warnings: 0

          mysql> SELECT * FROM t;
          +----+------+
          | id | name |
          +----+------+
          |  1 | Bob  |
          |  2 | Mary |
          |  3 | Jane |
          |  4 | Lisa |
          +----+------+
          4 rows in set (0.01 sec)

          mysql> SELECT LAST_INSERT_ID();
          +------------------+
          | LAST_INSERT_ID() |
          +------------------+
          |                2 |
          +------------------+
          1 row in set (0.00 sec)

     Although the second *Note `INSERT': insert.  statement inserted
     three new rows into `t', the ID generated for the first of these
     rows was `2', and it is this value that is returned by
     `LAST_INSERT_ID()' for the following *Note `SELECT': select.
     statement.

     If you use *Note `INSERT IGNORE': insert. and the row is ignored,
     the `AUTO_INCREMENT' counter is not incremented and
     `LAST_INSERT_ID()' returns `0', which reflects that no row was
     inserted.

     If EXPR is given as an argument to `LAST_INSERT_ID()', the value of
     the argument is returned by the function and is remembered as the
     next value to be returned by `LAST_INSERT_ID()'. This can be used
     to simulate sequences:

       1. Create a table to hold the sequence counter and initialize it:

               mysql> CREATE TABLE sequence (id INT NOT NULL);
               mysql> INSERT INTO sequence VALUES (0);

       2. Use the table to generate sequence numbers like this:

               mysql> UPDATE sequence SET id=LAST_INSERT_ID(id+1);
               mysql> SELECT LAST_INSERT_ID();

          The *Note `UPDATE': update. statement increments the sequence
          counter and causes the next call to `LAST_INSERT_ID()' to
          return the updated value. The *Note `SELECT': select.
          statement retrieves that value. The *Note
          `mysql_insert_id()': mysql-insert-id. C API function can also
          be used to get the value. See *Note mysql-insert-id::.

     You can generate sequences without calling `LAST_INSERT_ID()', but
     the utility of using the function this way is that the ID value is
     maintained in the server as the last automatically generated
     value. It is multi-user safe because multiple clients can issue
     the *Note `UPDATE': update. statement and get their own sequence
     value with the *Note `SELECT': select. statement (or *Note
     `mysql_insert_id()': mysql-insert-id.), without affecting or being
     affected by other clients that generate their own sequence values.

     Note that *Note `mysql_insert_id()': mysql-insert-id. is only
     updated after *Note `INSERT': insert. and *Note `UPDATE': update.
     statements, so you cannot use the C API function to retrieve the
     value for `LAST_INSERT_ID(EXPR)' after executing other SQL
     statements like *Note `SELECT': select. or *Note `SET':
     set-statement.

   *  `ROW_COUNT()'

     Before MySQL 5.5.5, `ROW_COUNT()' returns the number of rows
     changed, deleted, or inserted by the last statement if it was an
     *Note `UPDATE': update, *Note `DELETE': delete, or *Note `INSERT':
     insert. For other statements, the value may not be meaningful.

     As of MySQL 5.5.5, `ROW_COUNT()' returns a value as follows:

        * DDL statements: 0. This applies to statements such as *Note
          `CREATE TABLE': create-table. or *Note `DROP TABLE':
          drop-table.

        * DML statements other than *Note `SELECT': select.: The number
          of affected rows. This applies to statements such as *Note
          `UPDATE': update, *Note `INSERT': insert, or *Note `DELETE':
          delete. (as before), but now also to statements such as *Note
          `ALTER TABLE': alter-table. and *Note `LOAD DATA INFILE':
          load-data.

        * *Note `SELECT': select.: -1 if the statement returns a result
          set, or the number of rows `affected' if it does not. For
          example, for `SELECT * FROM t1', `ROW_COUNT()' returns -1. For
          `SELECT * FROM t1 INTO OUTFILE 'FILE_NAME'', `ROW_COUNT()'
          returns the number of rows written to the file.

        * *Note `SIGNAL': signal. statements: 0.

     For *Note `UPDATE': update. statements, the affected-rows value by
     default is the number of rows actually changed. If you specify the
     `CLIENT_FOUND_ROWS' flag to *Note `mysql_real_connect()':
     mysql-real-connect. when connecting to *Note `mysqld': mysqld, the
     affected-rows value is the number of rows `found'; that is,
     matched by the `WHERE' clause.

     For *Note `REPLACE': replace. statements, the affected-rows value
     is 2 if the new row replaced an old row, because in this case, one
     row was inserted after the duplicate was deleted.

     For *Note `INSERT ... ON DUPLICATE KEY UPDATE':
     insert-on-duplicate. statements, the affected-rows value per row
     is 1 if the row is inserted as a new row, 2 if an existing row is
     updated, and 0 if an existing row is set to its current values. If
     you specify the `CLIENT_FOUND_ROWS' flag, the affected-rows value
     is 1 (not 0) if an existing row is set to its current values.

     The `ROW_COUNT()' value is similar to the value from the *Note
     `mysql_affected_rows()': mysql-affected-rows. C API function and
     the row count that the *Note `mysql': mysql.  client displays
     following statement execution.

          mysql> INSERT INTO t VALUES(1),(2),(3);
          Query OK, 3 rows affected (0.00 sec)
          Records: 3  Duplicates: 0  Warnings: 0

          mysql> SELECT ROW_COUNT();
          +-------------+
          | ROW_COUNT() |
          +-------------+
          |           3 |
          +-------------+
          1 row in set (0.00 sec)

          mysql> DELETE FROM t WHERE i IN(1,2);
          Query OK, 2 rows affected (0.00 sec)

          mysql> SELECT ROW_COUNT();
          +-------------+
          | ROW_COUNT() |
          +-------------+
          |           2 |
          +-------------+
          1 row in set (0.00 sec)

     *Important*:

     `ROW_COUNT()' is not replicated reliably using statement-based
     replication. This function is automatically replicated using
     row-based replication.

   *  `SCHEMA()'

     This function is a synonym for `DATABASE()'.

   *  `SESSION_USER()'

     `SESSION_USER()' is a synonym for `USER()'.

   *  `SYSTEM_USER()'

     `SYSTEM_USER()' is a synonym for `USER()'.

   *  `USER()'

     Returns the current MySQL user name and host name as a string in
     the `utf8' character set.

          mysql> SELECT USER();
                  -> 'davida@localhost'

     The value indicates the user name you specified when connecting to
     the server, and the client host from which you connected. The
     value can be different from that of `CURRENT_USER()'.

     You can extract only the user name part like this:

          mysql> SELECT SUBSTRING_INDEX(USER(),'@',1);
                  -> 'davida'

   *  `VERSION()'

     Returns a string that indicates the MySQL server version. The
     string uses the `utf8' character set. The value might have a
     suffix in addition to the version number.  See the description of
     the `version' system variable in *Note server-system-variables::.

     This function is unsafe for statement-based replication.
     Beginning with MySQL 5.5.1, a warning is logged if you use this
     function when `binlog_format' is set to `STATEMENT'. (Bug #47995)

          mysql> SELECT VERSION();
                  -> '5.5.35-standard'


File: manual.info,  Node: miscellaneous-functions,  Next: group-by-functions-and-modifiers,  Prev: information-functions,  Up: functions

12.15 Miscellaneous Functions
=============================

*Miscellaneous Functions*

Name                          Description
`DEFAULT()'                   Return the default value for a table column
`GET_LOCK()'                  Get a named lock
`INET_ATON()'                 Return the numeric value of an IP address
`INET_NTOA()'                 Return the IP address from a numeric value
`IS_FREE_LOCK()'              Checks whether the named lock  is free
`IS_USED_LOCK()'              Checks whether the named lock is in use.
                              Return connection identifier if true.
`MASTER_POS_WAIT()'           Block until the slave has read and
                              applied all updates up to the specified
                              position
`NAME_CONST()'                Causes the column to have the given name
`RAND()'                      Return a random floating-point value
`RELEASE_LOCK()'              Releases the named lock
`SLEEP()'                     Sleep for a number of seconds
`UUID_SHORT()'                Return an integer-valued universal
                              identifier
`UUID()'                      Return a Universal Unique Identifier (UUID)
`VALUES()'                    Defines the values to be used during an
                              INSERT

   *  `DEFAULT(COL_NAME)'

     Returns the default value for a table column. An error results if
     the column has no default value.

          mysql> UPDATE t SET i = DEFAULT(i)+1 WHERE id < 100;

   * `FORMAT(X,D)'

     Formats the number X to a format like `'#,###,###.##'', rounded to
     D decimal places, and returns the result as a string. For details,
     see *Note string-functions::.

   *  `GET_LOCK(STR,TIMEOUT)'

     Tries to obtain a lock with a name given by the string STR, using
     a timeout of TIMEOUT seconds. Returns `1' if the lock was obtained
     successfully, `0' if the attempt timed out (for example, because
     another client has previously locked the name), or `NULL' if an
     error occurred (such as running out of memory or the thread was
     killed with *Note `mysqladmin kill': mysqladmin.). If you have a
     lock obtained with `GET_LOCK()', it is released when you execute
     `RELEASE_LOCK()', execute a new `GET_LOCK()', or your connection
     terminates (either normally or abnormally). Locks obtained with
     `GET_LOCK()' do not interact with transactions. That is,
     committing a transaction does not release any such locks obtained
     during the transaction.

     This function can be used to implement application locks or to
     simulate record locks. Names are locked on a server-wide basis. If
     a name has been locked by one client, `GET_LOCK()' blocks any
     request by another client for a lock with the same name. This
     enables clients that agree on a given lock name to use the name to
     perform cooperative advisory locking. But be aware that it also
     enables a client that is not among the set of cooperating clients
     to lock a name, either inadvertently or deliberately, and thus
     prevent any of the cooperating clients from locking that name. One
     way to reduce the likelihood of this is to use lock names that are
     database-specific or application-specific.  For example, use lock
     names of the form DB_NAME.STR or APP_NAME.STR.

          mysql> SELECT GET_LOCK('lock1',10);
                  -> 1
          mysql> SELECT IS_FREE_LOCK('lock2');
                  -> 1
          mysql> SELECT GET_LOCK('lock2',10);
                  -> 1
          mysql> SELECT RELEASE_LOCK('lock2');
                  -> 1
          mysql> SELECT RELEASE_LOCK('lock1');
                  -> NULL

     The second `RELEASE_LOCK()' call returns `NULL' because the lock
     `'lock1'' was automatically released by the second `GET_LOCK()'
     call.

     If multiple clients are waiting for a lock, the order in which
     they will acquire it is undefined and depends on factors such as
     the thread library in use. In particular, applications should not
     assume that clients will acquire the lock in the same order that
     they issued the lock requests.

     *Note*:

     Before MySQL 5.5.3, if a client attempts to acquire a lock that is
     already held by another client, it blocks according to the TIMEOUT
     argument. If the blocked client terminates, its thread does not
     die until the lock request times out.

     This function is unsafe for statement-based replication.
     Beginning with MySQL 5.5.1, a warning is logged if you use this
     function when `binlog_format' is set to `STATEMENT'. (Bug #47995)

   *  `INET_ATON(EXPR)'

     Given the dotted-quad representation of an IPv4 network address as
     a string, returns an integer that represents the numeric value of
     the address in network byte order (big endian). `INET_ATON()'
     returns `NULL' if it does not understand its argument.

          mysql> SELECT INET_ATON('10.0.5.9');
                  -> 167773449

     For this example, the return value is calculated as 10x256^3 +
     0x256^2 + 5x256 + 9.

     `INET_ATON()' may or may not return a non-`NULL' result for
     short-form IP addresses (such as `'127.1'' as a representation of
     `'127.0.0.1''). Because of this, `INET_ATON()'a should not be used
     for such addresses.

     *Note*:

     To store values generated by `INET_ATON()', use an `INT UNSIGNED'
     column rather than *Note `INT': integer-types, which is signed. If
     you use a signed column, values corresponding to IP addresses for
     which the first octet is greater than 127 cannot be stored
     correctly. See *Note out-of-range-and-overflow::.

   *  `INET_NTOA(EXPR)'

     Given a numeric IPv4 network address in network byte order,
     returns the dotted-quad representation of the address as a string.
     `INET_NTOA()' returns `NULL' if it does not understand its
     argument.

     As of MySQL 5.5.3, the return value is a nonbinary string in the
     connection character set. Before 5.5.3, the return value is a
     binary string.

          mysql> SELECT INET_NTOA(167773449);
                  -> '10.0.5.9'

   *  `IS_FREE_LOCK(STR)'

     Checks whether the lock named STR is free to use (that is, not
     locked). Returns `1' if the lock is free (no one is using the
     lock), `0' if the lock is in use, and `NULL' if an error occurs
     (such as an incorrect argument).

     This function is unsafe for statement-based replication.
     Beginning with MySQL 5.5.1, a warning is logged if you use this
     function when `binlog_format' is set to `STATEMENT'. (Bug #47995)

   *  `IS_USED_LOCK(STR)'

     Checks whether the lock named STR is in use (that is, locked). If
     so, it returns the connection identifier of the client that holds
     the lock. Otherwise, it returns `NULL'.

     This function is unsafe for statement-based replication.
     Beginning with MySQL 5.5.1, a warning is logged if you use this
     function when `binlog_format' is set to `STATEMENT'. (Bug #47995)

   *  `MASTER_POS_WAIT(LOG_NAME,LOG_POS[,TIMEOUT])'

     This function is useful for control of master/slave
     synchronization. It blocks until the slave has read and applied
     all updates up to the specified position in the master log. The
     return value is the number of log events the slave had to wait for
     to advance to the specified position. The function returns `NULL'
     if the slave SQL thread is not started, the slave's master
     information is not initialized, the arguments are incorrect, or an
     error occurs.  It returns `-1' if the timeout has been exceeded.
     If the slave SQL thread stops while `MASTER_POS_WAIT()' is waiting,
     the function returns `NULL'. If the slave is past the specified
     position, the function returns immediately.

     If a TIMEOUT value is specified, `MASTER_POS_WAIT()' stops waiting
     when TIMEOUT seconds have elapsed.  TIMEOUT must be greater than
     0; a zero or negative TIMEOUT means no timeout.

     This function is unsafe for statement-based replication.
     Beginning with MySQL 5.5.1, a warning is logged if you use this
     function when `binlog_format' is set to `STATEMENT'. (Bug #47995)

   *  `NAME_CONST(NAME,VALUE)'

     Returns the given value. When used to produce a result set column,
     `NAME_CONST()' causes the column to have the given name. The
     arguments should be constants.

          mysql> SELECT NAME_CONST('myname', 14);
          +--------+
          | myname |
          +--------+
          |     14 |
          +--------+

     This function is for internal use only. The server uses it when
     writing statements from stored programs that contain references to
     local program variables, as described in *Note
     stored-programs-logging::, You might see this function in the
     output from *Note `mysqlbinlog': mysqlbinlog.

   *  `RELEASE_LOCK(STR)'

     Releases the lock named by the string STR that was obtained with
     `GET_LOCK()'. Returns `1' if the lock was released, `0' if the
     lock was not established by this thread (in which case the lock is
     not released), and `NULL' if the named lock did not exist. The
     lock does not exist if it was never obtained by a call to
     `GET_LOCK()' or if it has previously been released.

     The *Note `DO': do. statement is convenient to use with
     `RELEASE_LOCK()'. See *Note do::.

     This function is unsafe for statement-based replication.
     Beginning with MySQL 5.5.1, a warning is logged if you use this
     function when `binlog_format' is set to `STATEMENT'. (Bug #47995)

   *  `SLEEP(DURATION)'

     Sleeps (pauses) for the number of seconds given by the DURATION
     argument, then returns 0.  If `SLEEP()' is interrupted, it returns
     1. The duration may have a fractional part.

     This function is unsafe for statement-based replication.
     Beginning with MySQL 5.5.1, a warning is logged if you use this
     function when `binlog_format' is set to `STATEMENT'. (Bug #47995)

   *  `UUID()'

     Returns a Universal Unique Identifier (UUID) generated according
     to `DCE 1.1: Remote Procedure Call' (Appendix A) CAE (Common
     Applications Environment) Specifications published by The Open
     Group in October 1997 (Document Number C706,
     `http://www.opengroup.org/public/pubs/catalog/c706.htm').

     A UUID is designed as a number that is globally unique in space
     and time. Two calls to `UUID()' are expected to generate two
     different values, even if these calls are performed on two
     separate computers that are not connected to each other.

     A UUID is a 128-bit number represented by a `utf8' string of five
     hexadecimal numbers in `aaaaaaaa-bbbb-cccc-dddd-eeeeeeeeeeee'
     format:

        * The first three numbers are generated from a timestamp.

        * The fourth number preserves temporal uniqueness in case the
          timestamp value loses monotonicity (for example, due to
          daylight saving time).

        * The fifth number is an IEEE 802 node number that provides
          spatial uniqueness. A random number is substituted if the
          latter is not available (for example, because the host
          computer has no Ethernet card, or we do not know how to find
          the hardware address of an interface on your operating
          system). In this case, spatial uniqueness cannot be
          guaranteed. Nevertheless, a collision should have _very_ low
          probability.

          Currently, the MAC address of an interface is taken into
          account only on FreeBSD and Linux. On other operating
          systems, MySQL uses a randomly generated 48-bit number.

          mysql> SELECT UUID();
                  -> '6ccd780c-baba-1026-9564-0040f4311e29'

     *Warning*:

     Although `UUID()' values are intended to be unique, they are not
     necessarily unguessable or unpredictable. If unpredictability is
     required, UUID values should be generated some other way.

     *Note*:

     `UUID()' does not work with statement-based replication.

   *  `UUID_SHORT()'

     Returns a `short' universal identifier as a 64-bit unsigned
     integer (rather than a string-form 128-bit identifier as returned
     by the `UUID()' function).

     The value of `UUID_SHORT()' is guaranteed to be unique if the
     following conditions hold:

        * The `server_id' of the current host is unique among your set
          of master and slave servers

        * `server_id' is between 0 and 255

        * You do not set back your system time for your server between
          *Note `mysqld': mysqld. restarts

        * You do not invoke `UUID_SHORT()' on average more than 16
          million times per second between *Note `mysqld': mysqld.
          restarts

     The `UUID_SHORT()' return value is constructed this way:

            (server_id & 255) << 56
          + (server_startup_time_in_seconds << 24)
          + incremented_variable++;

          mysql> SELECT UUID_SHORT();
                  -> 92395783831158784

     Note that `UUID_SHORT()' does not work with statement-based
     replication.

   *  `VALUES(COL_NAME)'

     In an *Note `INSERT ... ON DUPLICATE KEY UPDATE':
     insert-on-duplicate. statement, you can use the `VALUES(COL_NAME)'
     function in the *Note `UPDATE': update. clause to refer to column
     values from the *Note `INSERT': insert. portion of the statement.
     In other words, `VALUES(COL_NAME)' in the *Note `UPDATE': update.
     clause refers to the value of COL_NAME that would be inserted, had
     no duplicate-key conflict occurred. This function is especially
     useful in multiple-row inserts. The `VALUES()' function is
     meaningful only in the `ON DUPLICATE KEY UPDATE' clause of *Note
     `INSERT': insert. statements and returns `NULL' otherwise. See
     *Note insert-on-duplicate::.

          mysql> INSERT INTO table (a,b,c) VALUES (1,2,3),(4,5,6)
              -> ON DUPLICATE KEY UPDATE c=VALUES(a)+VALUES(b);


File: manual.info,  Node: group-by-functions-and-modifiers,  Next: spatial-extensions,  Prev: miscellaneous-functions,  Up: functions

12.16 Functions and Modifiers for Use with `GROUP BY' Clauses
=============================================================

* Menu:

* group-by-functions::           `GROUP BY' (Aggregate) Functions
* group-by-modifiers::           `GROUP BY' Modifiers
* group-by-extensions::          MySQL Extensions to `GROUP BY'


File: manual.info,  Node: group-by-functions,  Next: group-by-modifiers,  Prev: group-by-functions-and-modifiers,  Up: group-by-functions-and-modifiers

12.16.1 `GROUP BY' (Aggregate) Functions
----------------------------------------

*Aggregate (`GROUP BY') Functions*

Name                          Description
`AVG()'                       Return the average value of the argument
`BIT_AND()'                   Return bitwise and
`BIT_OR()'                    Return bitwise or
`BIT_XOR()'                   Return bitwise xor
`COUNT(DISTINCT)'             Return the count of a number of different
                              values
`COUNT()'                     Return a count of the number of rows
                              returned
`GROUP_CONCAT()'              Return a concatenated string
`MAX()'                       Return the maximum value
`MIN()'                       Return the minimum value
`STD()'                       Return the population standard deviation
`STDDEV_POP()'                Return the population standard deviation
`STDDEV_SAMP()'               Return the sample standard deviation
`STDDEV()'                    Return the population standard deviation
`SUM()'                       Return the sum
`VAR_POP()'                   Return the population standard variance
`VAR_SAMP()'                  Return the sample variance
`VARIANCE()'                  Return the population standard variance

This section describes group (aggregate) functions that operate on sets
of values. Unless otherwise stated, group functions ignore `NULL'
values.

If you use a group function in a statement containing no `GROUP BY'
clause, it is equivalent to grouping on all rows. For more information,
see *Note group-by-extensions::.

For numeric arguments, the variance and standard deviation functions
return a *Note `DOUBLE': floating-point-types. value.  The `SUM()' and
`AVG()' functions return a *Note `DECIMAL': fixed-point-types. value
for exact-value arguments (integer or *Note `DECIMAL':
fixed-point-types.), and a *Note `DOUBLE': floating-point-types. value
for approximate-value arguments (*Note `FLOAT': floating-point-types. or
*Note `DOUBLE': floating-point-types.).

The `SUM()' and `AVG()' aggregate functions do not work with temporal
values. (They convert the values to numbers, losing everything after
the first nonnumeric character.) To work around this problem, convert
to numeric units, perform the aggregate operation, and convert back to
a temporal value.  Examples:

     SELECT SEC_TO_TIME(SUM(TIME_TO_SEC(TIME_COL))) FROM TBL_NAME;
     SELECT FROM_DAYS(SUM(TO_DAYS(DATE_COL))) FROM TBL_NAME;

Functions such as `SUM()' or `AVG()' that expect a numeric argument
cast the argument to a number if necessary. For *Note `SET': set. or
*Note `ENUM': enum. values, the cast operation causes the underlying
numeric value to be used.

   *  `AVG([DISTINCT] EXPR)'

     Returns the average value of `EXPR'. The `DISTINCT' option can be
     used to return the average of the distinct values of EXPR.

     `AVG()' returns `NULL' if there were no matching rows.

          mysql> SELECT student_name, AVG(test_score)
              ->        FROM student
              ->        GROUP BY student_name;

   *  `BIT_AND(EXPR)'

     Returns the bitwise `AND' of all bits in EXPR. The calculation is
     performed with 64-bit (*Note `BIGINT': integer-types.) precision.

     This function returns `18446744073709551615' if there were no
     matching rows. (This is the value of an unsigned *Note `BIGINT':
     integer-types. value with all bits set to 1.)

   *  `BIT_OR(EXPR)'

     Returns the bitwise `OR' of all bits in EXPR. The calculation is
     performed with 64-bit (*Note `BIGINT': integer-types.) precision.

     This function returns `0' if there were no matching rows.

   *  `BIT_XOR(EXPR)'

     Returns the bitwise `XOR' of all bits in EXPR. The calculation is
     performed with 64-bit (*Note `BIGINT': integer-types.) precision.

     This function returns `0' if there were no matching rows.

   *  `COUNT(EXPR)'

     Returns a count of the number of non-`NULL' values of EXPR in the
     rows retrieved by a *Note `SELECT': select.  statement. The result
     is a *Note `BIGINT': integer-types. value.

     `COUNT()' returns `0' if there were no matching rows.

          mysql> SELECT student.student_name,COUNT(*)
              ->        FROM student,course
              ->        WHERE student.student_id=course.student_id
              ->        GROUP BY student_name;

     `COUNT(*)' is somewhat different in that it returns a count of the
     number of rows retrieved, whether or not they contain `NULL'
     values.

     `COUNT(*)' is optimized to return very quickly if the *Note
     `SELECT': select. retrieves from one table, no other columns are
     retrieved, and there is no `WHERE' clause. For example:

          mysql> SELECT COUNT(*) FROM student;

     This optimization applies only to `MyISAM' tables only, because an
     exact row count is stored for this storage engine and can be
     accessed very quickly. For transactional storage engines such as
     `InnoDB', storing an exact row count is more problematic because
     multiple transactions may be occurring, each of which may affect
     the count.

   *  `COUNT(DISTINCT EXPR,[EXPR...])'

     Returns a count of the number of rows with different non-`NULL'
     EXPR values.

     `COUNT(DISTINCT)' returns `0' if there were no matching rows.

          mysql> SELECT COUNT(DISTINCT results) FROM student;

     In MySQL, you can obtain the number of distinct expression
     combinations that do not contain `NULL' by giving a list of
     expressions. In standard SQL, you would have to do a concatenation
     of all expressions inside `COUNT(DISTINCT ...)'.

   *  `GROUP_CONCAT(EXPR)'

     This function returns a string result with the concatenated
     non-`NULL' values from a group. It returns `NULL' if there are no
     non-`NULL' values. The full syntax is as follows:

          GROUP_CONCAT([DISTINCT] EXPR [,EXPR ...]
                       [ORDER BY {UNSIGNED_INTEGER | COL_NAME | EXPR}
                           [ASC | DESC] [,COL_NAME ...]]
                       [SEPARATOR STR_VAL])

          mysql> SELECT student_name,
              ->     GROUP_CONCAT(test_score)
              ->     FROM student
              ->     GROUP BY student_name;

     Or:

          mysql> SELECT student_name,
              ->     GROUP_CONCAT(DISTINCT test_score
              ->               ORDER BY test_score DESC SEPARATOR ' ')
              ->     FROM student
              ->     GROUP BY student_name;

     In MySQL, you can get the concatenated values of expression
     combinations. To eliminate duplicate values, use the `DISTINCT'
     clause. To sort values in the result, use the `ORDER BY' clause.
     To sort in reverse order, add the `DESC' (descending) keyword to
     the name of the column you are sorting by in the `ORDER BY'
     clause. The default is ascending order; this may be specified
     explicitly using the `ASC' keyword. The default separator between
     values in a group is comma (``,''). To specify a separator
     explicitly, use `SEPARATOR' followed by the string literal value
     that should be inserted between group values. To eliminate the
     separator altogether, specify `SEPARATOR '''.

     The result is truncated to the maximum length that is given by the
     `group_concat_max_len' system variable, which has a default value
     of 1024. The value can be set higher, although the effective
     maximum length of the return value is constrained by the value of
     `max_allowed_packet'. The syntax to change the value of
     `group_concat_max_len' at runtime is as follows, where VAL is an
     unsigned integer:

          SET [GLOBAL | SESSION] group_concat_max_len = VAL;

     The return value is a nonbinary or binary string, depending on
     whether the arguments are nonbinary or binary strings.  The result
     type is *Note `TEXT': blob. or *Note `BLOB': blob. unless
     `group_concat_max_len' is less than or equal to 512, in which case
     the result type is *Note `VARCHAR': char. or *Note `VARBINARY':
     binary-varbinary.

     See also `CONCAT()' and `CONCAT_WS()': *Note string-functions::.

   *  `MAX([DISTINCT] EXPR)'

     Returns the maximum value of EXPR.  `MAX()' may take a string
     argument; in such cases, it returns the maximum string value. See
     *Note mysql-indexes::. The `DISTINCT' keyword can be used to find
     the maximum of the distinct values of EXPR, however, this produces
     the same result as omitting `DISTINCT'.

     `MAX()' returns `NULL' if there were no matching rows.

          mysql> SELECT student_name, MIN(test_score), MAX(test_score)
              ->        FROM student
              ->        GROUP BY student_name;

     For `MAX()', MySQL currently compares *Note `ENUM': enum. and
     *Note `SET': set. columns by their string value rather than by the
     string's relative position in the set. This differs from how
     `ORDER BY' compares them. This is expected to be rectified in a
     future MySQL release.

   *  `MIN([DISTINCT] EXPR)'

     Returns the minimum value of EXPR.  `MIN()' may take a string
     argument; in such cases, it returns the minimum string value. See
     *Note mysql-indexes::. The `DISTINCT' keyword can be used to find
     the minimum of the distinct values of EXPR, however, this produces
     the same result as omitting `DISTINCT'.

     `MIN()' returns `NULL' if there were no matching rows.

          mysql> SELECT student_name, MIN(test_score), MAX(test_score)
              ->        FROM student
              ->        GROUP BY student_name;

     For `MIN()', MySQL currently compares *Note `ENUM': enum. and
     *Note `SET': set. columns by their string value rather than by the
     string's relative position in the set. This differs from how
     `ORDER BY' compares them. This is expected to be rectified in a
     future MySQL release.

   *  `STD(EXPR)'

     Returns the population standard deviation of EXPR. This is an
     extension to standard SQL. The standard SQL function
     `STDDEV_POP()' can be used instead.

     This function returns `NULL' if there were no matching rows.

   *  `STDDEV(EXPR)'

     Returns the population standard deviation of EXPR. This function
     is provided for compatibility with Oracle. The standard SQL
     function `STDDEV_POP()' can be used instead.

     This function returns `NULL' if there were no matching rows.

   *  `STDDEV_POP(EXPR)'

     Returns the population standard deviation of EXPR (the square root
     of `VAR_POP()'). You can also use `STD()' or `STDDEV()', which are
     equivalent but not standard SQL.

     `STDDEV_POP()' returns `NULL' if there were no matching rows.

   *  `STDDEV_SAMP(EXPR)'

     Returns the sample standard deviation of EXPR (the square root of
     `VAR_SAMP()'.

     `STDDEV_SAMP()' returns `NULL' if there were no matching rows.

   *  `SUM([DISTINCT] EXPR)'

     Returns the sum of EXPR. If the return set has no rows, `SUM()'
     returns `NULL'. The `DISTINCT' keyword can be used to sum only the
     distinct values of EXPR.

     `SUM()' returns `NULL' if there were no matching rows.

   *  `VAR_POP(EXPR)'

     Returns the population standard variance of EXPR. It considers
     rows as the whole population, not as a sample, so it has the
     number of rows as the denominator. You can also use `VARIANCE()',
     which is equivalent but is not standard SQL.

     `VAR_POP()' returns `NULL' if there were no matching rows.

   *  `VAR_SAMP(EXPR)'

     Returns the sample variance of EXPR. That is, the denominator is
     the number of rows minus one.

     `VAR_SAMP()' returns `NULL' if there were no matching rows.

   *  `VARIANCE(EXPR)'

     Returns the population standard variance of EXPR. This is an
     extension to standard SQL. The standard SQL function `VAR_POP()'
     can be used instead.

     `VARIANCE()' returns `NULL' if there were no matching rows.


File: manual.info,  Node: group-by-modifiers,  Next: group-by-extensions,  Prev: group-by-functions,  Up: group-by-functions-and-modifiers

12.16.2 `GROUP BY' Modifiers
----------------------------

The `GROUP BY' clause permits a `WITH ROLLUP' modifier that causes
extra rows to be added to the summary output. These rows represent
higher-level (or super-aggregate) summary operations. `ROLLUP' thus
enables you to answer questions at multiple levels of analysis with a
single query. It can be used, for example, to provide support for OLAP
(Online Analytical Processing) operations.

Suppose that a table named `sales' has `year', `country', `product',
and `profit' columns for recording sales profitability:

     CREATE TABLE sales
     (
         year    INT NOT NULL,
         country VARCHAR(20) NOT NULL,
         product VARCHAR(32) NOT NULL,
         profit  INT
     );

The table's contents can be summarized per year with a simple `GROUP
BY' like this:

     mysql> SELECT year, SUM(profit) FROM sales GROUP BY year;
     +------+-------------+
     | year | SUM(profit) |
     +------+-------------+
     | 2000 |        4525 |
     | 2001 |        3010 |
     +------+-------------+

This output shows the total profit for each year, but if you also want
to determine the total profit summed over all years, you must add up
the individual values yourself or run an additional query.

Or you can use `ROLLUP', which provides both levels of analysis with a
single query. Adding a `WITH ROLLUP' modifier to the `GROUP BY' clause
causes the query to produce another row that shows the grand total over
all year values:

     mysql> SELECT year, SUM(profit) FROM sales GROUP BY year WITH ROLLUP;
     +------+-------------+
     | year | SUM(profit) |
     +------+-------------+
     | 2000 |        4525 |
     | 2001 |        3010 |
     | NULL |        7535 |
     +------+-------------+

The grand total super-aggregate line is identified by the value `NULL'
in the `year' column.

`ROLLUP' has a more complex effect when there are multiple `GROUP BY'
columns. In this case, each time there is a `break' (change in value) in
any but the last grouping column, the query produces an extra
super-aggregate summary row.

For example, without `ROLLUP', a summary on the `sales' table based on
`year', `country', and `product' might look like this:

     mysql> SELECT year, country, product, SUM(profit)
         -> FROM sales
         -> GROUP BY year, country, product;
     +------+---------+------------+-------------+
     | year | country | product    | SUM(profit) |
     +------+---------+------------+-------------+
     | 2000 | Finland | Computer   |        1500 |
     | 2000 | Finland | Phone      |         100 |
     | 2000 | India   | Calculator |         150 |
     | 2000 | India   | Computer   |        1200 |
     | 2000 | USA     | Calculator |          75 |
     | 2000 | USA     | Computer   |        1500 |
     | 2001 | Finland | Phone      |          10 |
     | 2001 | USA     | Calculator |          50 |
     | 2001 | USA     | Computer   |        2700 |
     | 2001 | USA     | TV         |         250 |
     +------+---------+------------+-------------+

The output indicates summary values only at the year/country/product
level of analysis. When `ROLLUP' is added, the query produces several
extra rows:

     mysql> SELECT year, country, product, SUM(profit)
         -> FROM sales
         -> GROUP BY year, country, product WITH ROLLUP;
     +------+---------+------------+-------------+
     | year | country | product    | SUM(profit) |
     +------+---------+------------+-------------+
     | 2000 | Finland | Computer   |        1500 |
     | 2000 | Finland | Phone      |         100 |
     | 2000 | Finland | NULL       |        1600 |
     | 2000 | India   | Calculator |         150 |
     | 2000 | India   | Computer   |        1200 |
     | 2000 | India   | NULL       |        1350 |
     | 2000 | USA     | Calculator |          75 |
     | 2000 | USA     | Computer   |        1500 |
     | 2000 | USA     | NULL       |        1575 |
     | 2000 | NULL    | NULL       |        4525 |
     | 2001 | Finland | Phone      |          10 |
     | 2001 | Finland | NULL       |          10 |
     | 2001 | USA     | Calculator |          50 |
     | 2001 | USA     | Computer   |        2700 |
     | 2001 | USA     | TV         |         250 |
     | 2001 | USA     | NULL       |        3000 |
     | 2001 | NULL    | NULL       |        3010 |
     | NULL | NULL    | NULL       |        7535 |
     +------+---------+------------+-------------+

For this query, adding `ROLLUP' causes the output to include summary
information at four levels of analysis, not just one. Here is how to
interpret the `ROLLUP' output:

   * Following each set of product rows for a given year and country,
     an extra summary row is produced showing the total for all
     products. These rows have the `product' column set to `NULL'.

   * Following each set of rows for a given year, an extra summary row
     is produced showing the total for all countries and products.
     These rows have the `country' and `products' columns set to `NULL'.

   * Finally, following all other rows, an extra summary row is
     produced showing the grand total for all years, countries, and
     products. This row has the `year', `country', and `products'
     columns set to `NULL'.

* Other Considerations When using `ROLLUP' *

The following items list some behaviors specific to the MySQL
implementation of `ROLLUP'.

When you use `ROLLUP', you cannot also use an `ORDER BY' clause to sort
the results. In other words, `ROLLUP' and `ORDER BY' are mutually
exclusive. However, you still have some control over sort order. `GROUP
BY' in MySQL sorts results, and you can use explicit `ASC' and `DESC'
keywords with columns named in the `GROUP BY' list to specify sort
order for individual columns. (The higher-level summary rows added by
`ROLLUP' still appear after the rows from which they are calculated,
regardless of the sort order.)

`LIMIT' can be used to restrict the number of rows returned to the
client. `LIMIT' is applied after `ROLLUP', so the limit applies against
the extra rows added by `ROLLUP'. For example:

     mysql> SELECT year, country, product, SUM(profit)
         -> FROM sales
         -> GROUP BY year, country, product WITH ROLLUP
         -> LIMIT 5;
     +------+---------+------------+-------------+
     | year | country | product    | SUM(profit) |
     +------+---------+------------+-------------+
     | 2000 | Finland | Computer   |        1500 |
     | 2000 | Finland | Phone      |         100 |
     | 2000 | Finland | NULL       |        1600 |
     | 2000 | India   | Calculator |         150 |
     | 2000 | India   | Computer   |        1200 |
     +------+---------+------------+-------------+

Using `LIMIT' with `ROLLUP' may produce results that are more difficult
to interpret, because you have less context for understanding the
super-aggregate rows.

The `NULL' indicators in each super-aggregate row are produced when the
row is sent to the client. The server looks at the columns named in the
`GROUP BY' clause following the leftmost one that has changed value. For
any column in the result set with a name that is a lexical match to any
of those names, its value is set to `NULL'. (If you specify grouping
columns by column number, the server identifies which columns to set to
`NULL' by number.)

Because the `NULL' values in the super-aggregate rows are placed into
the result set at such a late stage in query processing, you cannot
test them as `NULL' values within the query itself. For example, you
cannot add `HAVING product IS NULL' to the query to eliminate from the
output all but the super-aggregate rows.

On the other hand, the `NULL' values do appear as `NULL' on the client
side and can be tested as such using any MySQL client programming
interface.

MySQL permits a column that does not appear in the `GROUP BY' list to
be named in the select list.  In this case, the server is free to
choose any value from this nonaggregated column in summary rows, and
this includes the extra rows added by `WITH ROLLUP'. For example, in
the following query, `country' is a nonaggregated column that does not
appear in the `GROUP BY' list and values chosen for this column are
indeterminate:

     mysql> SELECT year, country, SUM(profit)
         -> FROM sales GROUP BY year WITH ROLLUP;
     +------+---------+-------------+
     | year | country | SUM(profit) |
     +------+---------+-------------+
     | 2000 | India   |        4525 |
     | 2001 | USA     |        3010 |
     | NULL | USA     |        7535 |
     +------+---------+-------------+

This behavior occurs if the `ONLY_FULL_GROUP_BY' SQL mode is not
enabled. If that mode is enabled, the server rejects the query as
illegal because `country' is not listed in the `GROUP BY' clause. For
more information about nonaggregated columns and `GROUP BY', see *Note
group-by-extensions::.


File: manual.info,  Node: group-by-extensions,  Prev: group-by-modifiers,  Up: group-by-functions-and-modifiers

12.16.3 MySQL Extensions to `GROUP BY'
--------------------------------------

In standard SQL, a query that includes a `GROUP BY' clause cannot refer
to nonaggregated columns in the select list that are not named in the
`GROUP BY' clause. For example, this query is illegal in standard SQL
because the `name' column in the select list does not appear in the
`GROUP BY':

     SELECT o.custid, c.name, MAX(o.payment)
       FROM orders AS o, customers AS c
       WHERE o.custid = c.custid
       GROUP BY o.custid;

For the query to be legal, the `name' column must be omitted from the
select list or named in the `GROUP BY' clause.

MySQL extends the use of `GROUP BY' so that the select list can refer
to nonaggregated columns not named in the `GROUP BY' clause. This means
that the preceding query is legal in MySQL. You can use this feature to
get better performance by avoiding unnecessary column sorting and
grouping. However, this is useful primarily when all values in each
nonaggregated column not named in the `GROUP BY' are the same for each
group. The server is free to choose any value from each group, so
unless they are the same, the values chosen are indeterminate.
Furthermore, the selection of values from each group cannot be
influenced by adding an `ORDER BY' clause. Sorting of the result set
occurs after values have been chosen, and `ORDER BY' does not affect
which values within each group the server chooses.

A similar MySQL extension applies to the `HAVING' clause. In standard
SQL, a query that includes a `GROUP BY' clause cannot refer to
nonaggregated columns in the `HAVING' clause that are not named in the
`GROUP BY' clause. A MySQL extension permits references to such columns
to simplify calculations. This extension assumes that the nongrouped
columns will have the same group-wise values. Otherwise, the result is
indeterminate.

To disable the MySQL `GROUP BY' extension, enable the
`ONLY_FULL_GROUP_BY' SQL mode. This enables standard SQL behavior:
Columns not named in the `GROUP BY' clause cannot be used in the select
list or `HAVING' clause unless enclosed in an aggregate function.

`ONLY_FULL_GROUP_BY' also affects use of aliases in the `HAVING'
clauses.  For example, the following query returns `name' values that
occur only once in table `orders':

     SELECT name, COUNT(name) FROM orders
       GROUP BY name
       HAVING COUNT(name) = 1;

MySQL extends this behavior to permit the use of an alias in the
`HAVING' clause for the aggregated column:

     SELECT name, COUNT(name) AS c FROM orders
       GROUP BY name
       HAVING c = 1;

Enabling `ONLY_FULL_GROUP_BY' disables this MySQL extension and a
`non-grouping field 'c' is used in HAVING clause' error occurs because
the column `c' in the `HAVING' clause is not enclosed in an aggregate
function (instead, it _is_ an aggregate function).

The select list extension also applies to `ORDER BY'. That is, you can
refer to nonaggregated columns in the `ORDER BY' clause that do not
appear in the `GROUP BY' clause. (However, as mentioned previously,
`ORDER BY' does not affect which values are chosen from nonaggregated
columns; it only sorts them after they have been chosen.) This
extension does not apply if the `ONLY_FULL_GROUP_BY' SQL mode is
enabled.

In some cases, you can use `MIN()' and `MAX()' to obtain a specific
column value even if it is not unique. If the `sort' column contains
integers no larger than 6 digits, the following query gives the value of
`column' from the row containing the smallest `sort' value:

     SUBSTR(MIN(CONCAT(LPAD(sort,6,'0'),column)),7)

See *Note example-maximum-column-group-row::.

If you are trying to follow standard SQL, you cannot use expressions in
`GROUP BY' clauses. As a workaround, use an alias for the expression:

     SELECT id, FLOOR(value/100) AS val
       FROM TBL_NAME
       GROUP BY id, val;

MySQL permits expressions in `GROUP BY' clauses, so the alias is
unnecessary:

     SELECT id, FLOOR(value/100)
       FROM TBL_NAME
       GROUP BY id, FLOOR(value/100);


File: manual.info,  Node: spatial-extensions,  Next: precision-math,  Prev: group-by-functions-and-modifiers,  Up: functions

12.17 Spatial Extensions
========================

* Menu:

* gis-introduction::             Introduction to MySQL Spatial Support
* opengis-geometry-model::       The OpenGIS Geometry Model
* supported-spatial-data-formats::  Supported Spatial Data Formats
* creating-a-spatially-enabled-mysql-database::  Creating a Spatially Enabled MySQL Database
* spatial-analysis-functions::   Spatial Analysis Functions
* optimizing-spatial-analysis::  Optimizing Spatial Analysis
* mysql-gis-conformance-and-compatibility::  MySQL Conformance and Compatibility

MySQL supports spatial extensions to enable the generation, storage,
and analysis of geographic features. These features are available for
`MyISAM', `InnoDB', *Note `NDB': mysql-cluster, and `ARCHIVE' tables.

For spatial columns, `MyISAM' supports both `SPATIAL' and non-`SPATIAL'
indexes. Other storage engines support non-`SPATIAL' indexes, as
described in *Note create-index::.

This chapter covers the following topics:

   * The basis of these spatial extensions in the OpenGIS geometry model

   * Data formats for representing spatial data

   * How to use spatial data in MySQL

   * Use of indexing for spatial data

   * MySQL differences from the OpenGIS specification

* Additional Resources *

   * The Open Geospatial Consortium publishes the `OpenGIS(R) Simple
     Features Specifications For SQL', a document that proposes several
     conceptual ways for extending an SQL RDBMS to support spatial
     data. This specification is available from the OGC Web site at
     `http://www.opengis.org/docs/99-049.pdf'.

   * If you have questions or concerns about the use of the spatial
     extensions to MySQL, you can discuss them in the GIS forum:
     `http://forums.mysql.com/list.php?23'.


File: manual.info,  Node: gis-introduction,  Next: opengis-geometry-model,  Prev: spatial-extensions,  Up: spatial-extensions

12.17.1 Introduction to MySQL Spatial Support
---------------------------------------------

MySQL implements spatial extensions following the specification of the
Open Geospatial Consortium (OGC). This is an international consortium
of more than 250 companies, agencies, and universities participating in
the development of publicly available conceptual solutions that can be
useful with all kinds of applications that manage spatial data. The OGC
maintains a Web site at `http://www.opengis.org/'.

In 1997, the Open Geospatial Consortium published the `OpenGIS(R)
Simple Features Specifications For SQL', a document that proposes
several conceptual ways for extending an SQL RDBMS to support spatial
data. This specification is available from the OGC Web site at
`http://www.opengis.org/docs/99-049.pdf'. It contains additional
information relevant to this chapter.

MySQL implements a subset of the *SQL with Geometry Types* environment
proposed by OGC. This term refers to an SQL environment that has been
extended with a set of geometry types. A geometry-valued SQL column is
implemented as a column that has a geometry type. The specification
describe a set of SQL geometry types, as well as functions on those
types to create and analyze geometry values.

A *geographic feature* is anything in the world that has a location. A
feature can be:

   * An entity. For example, a mountain, a pond, a city.

   * A space. For example, town district, the tropics.

   * A definable location. For example, a crossroad, as a particular
     place where two streets intersect.

Some documents use the term *geospatial feature* to refer to geographic
features.

*Geometry* is another word that denotes a geographic feature.
Originally the word *geometry* meant measurement of the earth. Another
meaning comes from cartography, referring to the geometric features
that cartographers use to map the world.

This chapter uses all of these terms synonymously: *geographic feature*,
*geospatial feature*, *feature*, or *geometry*. Here, the term most
commonly used is *geometry*, defined as _a point or an aggregate of
points representing anything in the world that has a location_.


File: manual.info,  Node: opengis-geometry-model,  Next: supported-spatial-data-formats,  Prev: gis-introduction,  Up: spatial-extensions

12.17.2 The OpenGIS Geometry Model
----------------------------------

* Menu:

* gis-geometry-class-hierarchy::  The Geometry Class Hierarchy
* gis-class-geometry::           Class `Geometry'
* gis-class-point::              Class `Point'
* gis-class-curve::              Class `Curve'
* gis-class-linestring::         Class `LineString'
* gis-class-surface::            Class `Surface'
* gis-class-polygon::            Class `Polygon'
* gis-class-geometrycollection::  Class `GeometryCollection'
* gis-class-multipoint::         Class `MultiPoint'
* gis-class-multicurve::         Class `MultiCurve'
* gis-class-multilinestring::    Class `MultiLineString'
* gis-class-multisurface::       Class `MultiSurface'
* gis-class-multipolygon::       Class `MultiPolygon'

The set of geometry types proposed by OGC's *SQL with Geometry Types*
environment is based on the *OpenGIS Geometry Model*. In this model,
each geometric object has the following general properties:

   * It is associated with a Spatial Reference System, which describes
     the coordinate space in which the object is defined.

   * It belongs to some geometry class.


File: manual.info,  Node: gis-geometry-class-hierarchy,  Next: gis-class-geometry,  Prev: opengis-geometry-model,  Up: opengis-geometry-model

12.17.2.1 The Geometry Class Hierarchy
......................................

The geometry classes define a hierarchy as follows:

   * `Geometry' (noninstantiable)

        * `Point' (instantiable)

        * `Curve' (noninstantiable)

             * `LineString' (instantiable)

                  * `Line'

                  * `LinearRing'

        * `Surface' (noninstantiable)

             * `Polygon' (instantiable)

        * `GeometryCollection' (instantiable)

             * `MultiPoint' (instantiable)

             * `MultiCurve' (noninstantiable)

                  * `MultiLineString' (instantiable)

             * `MultiSurface' (noninstantiable)

                  * `MultiPolygon' (instantiable)

It is not possible to create objects in noninstantiable classes.  It is
possible to create objects in instantiable classes. All classes have
properties, and instantiable classes may also have assertions (rules
that define valid class instances).

`Geometry' is the base class. It is an abstract class. The instantiable
subclasses of `Geometry' are restricted to zero-, one-, and
two-dimensional geometric objects that exist in two-dimensional
coordinate space. All instantiable geometry classes are defined so that
valid instances of a geometry class are topologically closed (that is,
all defined geometries include their boundary).

The base `Geometry' class has subclasses for `Point', `Curve',
`Surface', and `GeometryCollection':

   * `Point' represents zero-dimensional objects.

   * `Curve' represents one-dimensional objects, and has subclass
     `LineString', with sub-subclasses `Line' and `LinearRing'.

   * `Surface' is designed for two-dimensional objects and has subclass
     `Polygon'.

   * `GeometryCollection' has specialized zero-, one-, and
     two-dimensional collection classes named `MultiPoint',
     `MultiLineString', and `MultiPolygon' for modeling geometries
     corresponding to collections of `Points', `LineStrings', and
     `Polygons', respectively.  `MultiCurve' and `MultiSurface' are
     introduced as abstract superclasses that generalize the collection
     interfaces to handle `Curves' and `Surfaces'.

`Geometry', `Curve', `Surface', `MultiCurve', and `MultiSurface' are
defined as noninstantiable classes. They define a common set of methods
for their subclasses and are included for extensibility.

`Point', `LineString', `Polygon', `GeometryCollection', `MultiPoint',
`MultiLineString', and `MultiPolygon' are instantiable classes.


File: manual.info,  Node: gis-class-geometry,  Next: gis-class-point,  Prev: gis-geometry-class-hierarchy,  Up: opengis-geometry-model

12.17.2.2 Class `Geometry'
..........................

`Geometry' is the root class of the hierarchy.  It is a noninstantiable
class but has a number of properties that are common to all geometry
values created from any of the `Geometry' subclasses. These properties
are described in the following list. Particular subclasses have their
own specific properties, described later.

*Geometry Properties*

A geometry value has the following properties:

   * Its *type*. Each geometry belongs to one of the instantiable
     classes in the hierarchy.

   * Its *SRID*, or Spatial Reference Identifier. This value identifies
     the geometry's associated Spatial Reference System that describes
     the coordinate space in which the geometry object is defined.

     In MySQL, the SRID value is just an integer associated with the
     geometry value. All calculations are done assuming Euclidean
     (planar) geometry.

   * Its *coordinates* in its Spatial Reference System, represented as
     double-precision (8-byte) numbers. All nonempty geometries include
     at least one pair of (X,Y) coordinates. Empty geometries contain no
     coordinates.

     Coordinates are related to the SRID. For example, in different
     coordinate systems, the distance between two objects may differ
     even when objects have the same coordinates, because the distance
     on the *planar* coordinate system and the distance on the
     *geocentric* system (coordinates on the Earth's surface) are
     different things.

   * Its *interior*, *boundary*, and *exterior*.

     Every geometry occupies some position in space. The exterior of a
     geometry is all space not occupied by the geometry. The interior
     is the space occupied by the geometry. The boundary is the
     interface between the geometry's interior and exterior.

   * Its *MBR* (Minimum Bounding Rectangle), or Envelope. This is the
     bounding geometry, formed by the minimum and maximum (X,Y)
     coordinates:

          ((MINX MINY, MAXX MINY, MAXX MAXY, MINX MAXY, MINX MINY))

   * Whether the value is *simple* or *nonsimple*. Geometry values of
     types (`LineString', `MultiPoint', `MultiLineString') are either
     simple or nonsimple. Each type determines its own assertions for
     being simple or nonsimple.

   * Whether the value is *closed* or *not closed*. Geometry values of
     types (`LineString', `MultiString') are either closed or not
     closed. Each type determines its own assertions for being closed
     or not closed.

   * Whether the value is *empty* or *nonempty* A geometry is empty if
     it does not have any points. Exterior, interior, and boundary of
     an empty geometry are not defined (that is, they are represented
     by a `NULL' value). An empty geometry is defined to be always
     simple and has an area of 0.

   * Its *dimension*. A geometry can have a dimension of -1, 0, 1, or 2:

        * -1 for an empty geometry.

        * 0 for a geometry with no length and no area.

        * 1 for a geometry with nonzero length and zero area.

        * 2 for a geometry with nonzero area.

     `Point' objects have a dimension of zero.  `LineString' objects
     have a dimension of 1.  `Polygon' objects have a dimension of 2.
     The dimensions of `MultiPoint', `MultiLineString', and
     `MultiPolygon' objects are the same as the dimensions of the
     elements they consist of.


File: manual.info,  Node: gis-class-point,  Next: gis-class-curve,  Prev: gis-class-geometry,  Up: opengis-geometry-model

12.17.2.3 Class `Point'
.......................

A `Point' is a geometry that represents a single location in coordinate
space.

*`Point' Examples*

   * Imagine a large-scale map of the world with many cities. A `Point'
     object could represent each city.

   * On a city map, a `Point' object could represent a bus stop.

*`Point' Properties*

   * X-coordinate value.

   * Y-coordinate value.

   * `Point' is defined as a zero-dimensional geometry.

   * The boundary of a `Point' is the empty set.


File: manual.info,  Node: gis-class-curve,  Next: gis-class-linestring,  Prev: gis-class-point,  Up: opengis-geometry-model

12.17.2.4 Class `Curve'
.......................

A `Curve' is a one-dimensional geometry, usually represented by a
sequence of points. Particular subclasses of `Curve' define the type of
interpolation between points. `Curve' is a noninstantiable class.

*`Curve' Properties*

   * A `Curve' has the coordinates of its points.

   * A `Curve' is defined as a one-dimensional geometry.

   * A `Curve' is simple if it does not pass through the same point
     twice.

   * A `Curve' is closed if its start point is equal to its endpoint.

   * The boundary of a closed `Curve' is empty.

   * The boundary of a nonclosed `Curve' consists of its two endpoints.

   * A `Curve' that is simple and closed is a `LinearRing'.


File: manual.info,  Node: gis-class-linestring,  Next: gis-class-surface,  Prev: gis-class-curve,  Up: opengis-geometry-model

12.17.2.5 Class `LineString'
............................

A `LineString' is a `Curve' with linear interpolation between points.

*`LineString' Examples*

   * On a world map, `LineString' objects could represent rivers.

   * In a city map, `LineString' objects could represent streets.

*`LineString' Properties*

   * A `LineString' has coordinates of segments, defined by each
     consecutive pair of points.

   * A `LineString' is a `Line' if it consists of exactly two points.

   * A `LineString' is a `LinearRing' if it is both closed and simple.


File: manual.info,  Node: gis-class-surface,  Next: gis-class-polygon,  Prev: gis-class-linestring,  Up: opengis-geometry-model

12.17.2.6 Class `Surface'
.........................

A `Surface' is a two-dimensional geometry. It is a noninstantiable
class. Its only instantiable subclass is `Polygon'.

*`Surface' Properties*

   * A `Surface' is defined as a two-dimensional geometry.

   * The OpenGIS specification defines a simple `Surface' as a geometry
     that consists of a single `patch' that is associated with a single
     exterior boundary and zero or more interior boundaries.

   * The boundary of a simple `Surface' is the set of closed curves
     corresponding to its exterior and interior boundaries.


File: manual.info,  Node: gis-class-polygon,  Next: gis-class-geometrycollection,  Prev: gis-class-surface,  Up: opengis-geometry-model

12.17.2.7 Class `Polygon'
.........................

A `Polygon' is a planar `Surface' representing a multisided geometry.
It is defined by a single exterior boundary and zero or more interior
boundaries, where each interior boundary defines a hole in the
`Polygon'.

*`Polygon' Examples*

   * On a region map, `Polygon' objects could represent forests,
     districts, and so on.

*`Polygon' Assertions*

   * The boundary of a `Polygon' consists of a set of `LinearRing'
     objects (that is, `LineString' objects that are both simple and
     closed) that make up its exterior and interior boundaries.

   * A `Polygon' has no rings that cross. The rings in the boundary of
     a `Polygon' may intersect at a `Point', but only as a tangent.

   * A `Polygon' has no lines, spikes, or punctures.

   * A `Polygon' has an interior that is a connected point set.

   * A `Polygon' may have holes. The exterior of a `Polygon' with holes
     is not connected.  Each hole defines a connected component of the
     exterior.

The preceding assertions make a `Polygon' a simple geometry.


File: manual.info,  Node: gis-class-geometrycollection,  Next: gis-class-multipoint,  Prev: gis-class-polygon,  Up: opengis-geometry-model

12.17.2.8 Class `GeometryCollection'
....................................

A `GeometryCollection' is a geometry that is a collection of one or
more geometries of any class.

All the elements in a `GeometryCollection' must be in the same Spatial
Reference System (that is, in the same coordinate system). There are no
other constraints on the elements of a `GeometryCollection', although
the subclasses of `GeometryCollection' described in the following
sections may restrict membership.  Restrictions may be based on:

   * Element type (for example, a `MultiPoint' may contain only `Point'
     elements)

   * Dimension

   * Constraints on the degree of spatial overlap between elements


File: manual.info,  Node: gis-class-multipoint,  Next: gis-class-multicurve,  Prev: gis-class-geometrycollection,  Up: opengis-geometry-model

12.17.2.9 Class `MultiPoint'
............................

A `MultiPoint' is a geometry collection composed of `Point' elements.
The points are not connected or ordered in any way.

*`MultiPoint' Examples*

   * On a world map, a `MultiPoint' could represent a chain of small
     islands.

   * On a city map, a `MultiPoint' could represent the outlets for a
     ticket office.

*`MultiPoint' Properties*

   * A `MultiPoint' is a zero-dimensional geometry.

   * A `MultiPoint' is simple if no two of its `Point' values are equal
     (have identical coordinate values).

   * The boundary of a `MultiPoint' is the empty set.


File: manual.info,  Node: gis-class-multicurve,  Next: gis-class-multilinestring,  Prev: gis-class-multipoint,  Up: opengis-geometry-model

12.17.2.10 Class `MultiCurve'
.............................

A `MultiCurve' is a geometry collection composed of `Curve' elements.
`MultiCurve' is a noninstantiable class.

*`MultiCurve' Properties*

   * A `MultiCurve' is a one-dimensional geometry.

   * A `MultiCurve' is simple if and only if all of its elements are
     simple; the only intersections between any two elements occur at
     points that are on the boundaries of both elements.

   * A `MultiCurve' boundary is obtained by applying the `mod 2 union
     rule' (also known as the `odd-even rule'): A point is in the
     boundary of a `MultiCurve' if it is in the boundaries of an odd
     number of `MultiCurve' elements.

   * A `MultiCurve' is closed if all of its elements are closed.

   * The boundary of a closed `MultiCurve' is always empty.


File: manual.info,  Node: gis-class-multilinestring,  Next: gis-class-multisurface,  Prev: gis-class-multicurve,  Up: opengis-geometry-model

12.17.2.11 Class `MultiLineString'
..................................

A `MultiLineString' is a `MultiCurve' geometry collection composed of
`LineString' elements.

*`MultiLineString' Examples*

   * On a region map, a `MultiLineString' could represent a river
     system or a highway system.


File: manual.info,  Node: gis-class-multisurface,  Next: gis-class-multipolygon,  Prev: gis-class-multilinestring,  Up: opengis-geometry-model

12.17.2.12 Class `MultiSurface'
...............................

A `MultiSurface' is a geometry collection composed of surface elements.
`MultiSurface' is a noninstantiable class. Its only instantiable
subclass is `MultiPolygon'.

*`MultiSurface' Assertions*

   * Two `MultiSurface' surfaces have no interiors that intersect.

   * Two `MultiSurface' elements have boundaries that intersect at most
     at a finite number of points.


File: manual.info,  Node: gis-class-multipolygon,  Prev: gis-class-multisurface,  Up: opengis-geometry-model

12.17.2.13 Class `MultiPolygon'
...............................

A `MultiPolygon' is a `MultiSurface' object composed of `Polygon'
elements.

*`MultiPolygon' Examples*

   * On a region map, a `MultiPolygon' could represent a system of
     lakes.

*`MultiPolygon' Assertions*

   * A `MultiPolygon' has no two `Polygon' elements with interiors that
     intersect.

   * A `MultiPolygon' has no two `Polygon' elements that cross
     (crossing is also forbidden by the previous assertion), or that
     touch at an infinite number of points.

   * A `MultiPolygon' may not have cut lines, spikes, or punctures. A
     `MultiPolygon' is a regular, closed point set.

   * A `MultiPolygon' that has more than one `Polygon' has an interior
     that is not connected. The number of connected components of the
     interior of a `MultiPolygon' is equal to the number of `Polygon'
     values in the `MultiPolygon'.

*`MultiPolygon' Properties*

   * A `MultiPolygon' is a two-dimensional geometry.

   * A `MultiPolygon' boundary is a set of closed curves (`LineString'
     values) corresponding to the boundaries of its `Polygon' elements.

   * Each `Curve' in the boundary of the `MultiPolygon' is in the
     boundary of exactly one `Polygon' element.

   * Every `Curve' in the boundary of an `Polygon' element is in the
     boundary of the `MultiPolygon'.


File: manual.info,  Node: supported-spatial-data-formats,  Next: creating-a-spatially-enabled-mysql-database,  Prev: opengis-geometry-model,  Up: spatial-extensions

12.17.3 Supported Spatial Data Formats
--------------------------------------

* Menu:

* gis-wkt-format::               Well-Known Text (WKT) Format
* gis-wkb-format::               Well-Known Binary (WKB) Format

This section describes the standard spatial data formats that are used
to represent geometry objects in queries. They are:

   * Well-Known Text (WKT) format

   * Well-Known Binary (WKB) format

Internally, MySQL stores geometry values in a format that is not
identical to either WKT or WKB format.


File: manual.info,  Node: gis-wkt-format,  Next: gis-wkb-format,  Prev: supported-spatial-data-formats,  Up: supported-spatial-data-formats

12.17.3.1 Well-Known Text (WKT) Format
......................................

The Well-Known Text (WKT) representation of Geometry is designed to
exchange geometry data in ASCII form. For a Backus-Naur grammar that
specifies the formal production rules for writing WKT values, see the
OpenGIS specification document referenced in *Note spatial-extensions::.

Examples of WKT representations of geometry objects:

   * A `Point':

          POINT(15 20)

     Note that point coordinates are specified with no separating
     comma. This differs from the syntax for the SQL `POINT()'
     function, which requires a comma between the coordinates. Take
     care to use the syntax appropriate to the context of a given
     spatial operation. For example, the following statements both
     extract the X-coordinate from a `Point' object. The first produces
     the object directly using the `POINT()' function. The second uses
     a WKT representation converted to a `Point' with `GeomFromText()'.

          mysql> SELECT X(POINT(15, 20));
          +------------------+
          | X(POINT(15, 20)) |
          +------------------+
          |               15 |
          +------------------+

          mysql> SELECT X(GeomFromText('POINT(15 20)'));
          +---------------------------------+
          | X(GeomFromText('POINT(15 20)')) |
          +---------------------------------+
          |                              15 |
          +---------------------------------+

   * A `LineString' with four points:

          LINESTRING(0 0, 10 10, 20 25, 50 60)

     Note that point coordinate pairs are separated by commas.

   * A `Polygon' with one exterior ring and one interior ring:

          POLYGON((0 0,10 0,10 10,0 10,0 0),(5 5,7 5,7 7,5 7, 5 5))

   * A `MultiPoint' with three `Point' values:

          MULTIPOINT(0 0, 20 20, 60 60)

   * A `MultiLineString' with two `LineString' values:

          MULTILINESTRING((10 10, 20 20), (15 15, 30 15))

   * A `MultiPolygon' with two `Polygon' values:

          MULTIPOLYGON(((0 0,10 0,10 10,0 10,0 0)),((5 5,7 5,7 7,5 7, 5 5)))

   * A `GeometryCollection' consisting of two `Point' values and one
     `LineString':

          GEOMETRYCOLLECTION(POINT(10 10), POINT(30 30), LINESTRING(15 15, 20 20))


File: manual.info,  Node: gis-wkb-format,  Prev: gis-wkt-format,  Up: supported-spatial-data-formats

12.17.3.2 Well-Known Binary (WKB) Format
........................................

The Well-Known Binary (WKB) representation for geometric values is
defined by the OpenGIS specification. It is also defined in the ISO
`SQL/MM Part 3: Spatial' standard.

WKB is used to exchange geometry data as binary streams represented by
*Note `BLOB': blob. values containing geometric WKB information.

WKB uses 1-byte unsigned integers, 4-byte unsigned integers, and 8-byte
double-precision numbers (IEEE 754 format). A byte is eight bits.

For example, a WKB value that corresponds to `POINT(1 1)' consists of
this sequence of 21 bytes (each represented here by two hex digits):

     0101000000000000000000F03F000000000000F03F

The sequence may be broken down into these components:

     Byte order : 01
     WKB type   : 01000000
     X          : 000000000000F03F
     Y          : 000000000000F03F

Component representation is as follows:

   * The byte order may be either 1 or 0 to indicate little-endian or
     big-endian storage. The little-endian and big-endian byte orders
     are also known as Network Data Representation (NDR) and External
     Data Representation (XDR), respectively.

   * The WKB type is a code that indicates the geometry type.  Values
     from 1 through 7 indicate `Point', `LineString', `Polygon',
     `MultiPoint', `MultiLineString', `MultiPolygon', and
     `GeometryCollection'.

   * A `Point' value has X and Y coordinates, each represented as a
     double-precision value.

WKB values for more complex geometry values are represented by more
complex data structures, as detailed in the OpenGIS specification.


File: manual.info,  Node: creating-a-spatially-enabled-mysql-database,  Next: spatial-analysis-functions,  Prev: supported-spatial-data-formats,  Up: spatial-extensions

12.17.4 Creating a Spatially Enabled MySQL Database
---------------------------------------------------

* Menu:

* mysql-spatial-datatypes::      MySQL Spatial Data Types
* creating-spatial-values::      Creating Spatial Values
* creating-spatial-columns::     Creating Spatial Columns
* populating-spatial-columns::   Populating Spatial Columns
* fetching-spatial-data::        Fetching Spatial Data

This section describes the data types you can use for representing
spatial data in MySQL, and the functions available for creating and
retrieving spatial values.


File: manual.info,  Node: mysql-spatial-datatypes,  Next: creating-spatial-values,  Prev: creating-a-spatially-enabled-mysql-database,  Up: creating-a-spatially-enabled-mysql-database

12.17.4.1 MySQL Spatial Data Types
..................................

MySQL has data types that correspond to OpenGIS classes. Some of these
types hold single geometry values:

   * `GEOMETRY'

   * `POINT'

   * `LINESTRING'

   * `POLYGON'

`GEOMETRY' can store geometry values of any type. The other
single-value types (`POINT', `LINESTRING', and `POLYGON') restrict
their values to a particular geometry type.

The other data types hold collections of values:

   * `MULTIPOINT'

   * `MULTILINESTRING'

   * `MULTIPOLYGON'

   * `GEOMETRYCOLLECTION'

`GEOMETRYCOLLECTION' can store a collection of objects of any type. The
other collection types (`MULTIPOINT', `MULTILINESTRING',
`MULTIPOLYGON', and `GEOMETRYCOLLECTION') restrict collection members
to those having a particular geometry type.


File: manual.info,  Node: creating-spatial-values,  Next: creating-spatial-columns,  Prev: mysql-spatial-datatypes,  Up: creating-a-spatially-enabled-mysql-database

12.17.4.2 Creating Spatial Values
.................................

* Menu:

* gis-wkt-functions::            Creating Geometry Values Using WKT Functions
* gis-wkb-functions::            Creating Geometry Values Using WKB Functions
* gis-mysql-specific-functions::  Creating Geometry Values Using MySQL-Specific Functions

This section describes how to create spatial values using Well-Known
Text and Well-Known Binary functions that are defined in the OpenGIS
standard, and using MySQL-specific functions.


File: manual.info,  Node: gis-wkt-functions,  Next: gis-wkb-functions,  Prev: creating-spatial-values,  Up: creating-spatial-values

12.17.4.3 Creating Geometry Values Using WKT Functions
......................................................

MySQL provides a number of functions that take as arguments a
Well-Known Text representation and, optionally, a spatial reference
system identifier (SRID). They return the corresponding geometry.

`GeomFromText()' accepts a WKT of any geometry type as its first
argument. An implementation also provides type-specific construction
functions for construction of geometry values of each geometry type.

   *  `GeomCollFromText(WKT[,SRID])',
     `GeometryCollectionFromText(WKT[,SRID])'

     Constructs a `GEOMETRYCOLLECTION' value using its WKT
     representation and SRID.

   *  `GeomFromText(WKT[,SRID])', `GeometryFromText(WKT[,SRID])'

     Constructs a geometry value of any type using its WKT
     representation and SRID.

   *  `LineFromText(WKT[,SRID])', `LineStringFromText(WKT[,SRID])'

     Constructs a `LINESTRING' value using its WKT representation and
     SRID.

   *  `MLineFromText(WKT[,SRID])', `MultiLineStringFromText(WKT[,SRID])'

     Constructs a `MULTILINESTRING' value using its WKT representation
     and SRID.

   *  `MPointFromText(WKT[,SRID])', `MultiPointFromText(WKT[,SRID])'

     Constructs a `MULTIPOINT' value using its WKT representation and
     SRID.

   *  `MPolyFromText(WKT[,SRID])', `MultiPolygonFromText(WKT[,SRID])'

     Constructs a `MULTIPOLYGON' value using its WKT representation and
     SRID.

   *  `PointFromText(WKT[,SRID])'

     Constructs a `POINT' value using its WKT representation and SRID.

   *  `PolyFromText(WKT[,SRID])', `PolygonFromText(WKT[,SRID])'

     Constructs a `POLYGON' value using its WKT representation and SRID.

The OpenGIS specification also defines the following optional
functions, which MySQL does not implement. These functions construct
`Polygon' or `MultiPolygon' values based on the WKT representation of a
collection of rings or closed `LineString' values. These values may
intersect.

   *  `BdMPolyFromText(WKT,SRID)'

     Constructs a `MultiPolygon' value from a `MultiLineString' value
     in WKT format containing an arbitrary collection of closed
     `LineString' values.

   *  `BdPolyFromText(WKT,SRID)'

     Constructs a `Polygon' value from a `MultiLineString' value in WKT
     format containing an arbitrary collection of closed `LineString'
     values.


File: manual.info,  Node: gis-wkb-functions,  Next: gis-mysql-specific-functions,  Prev: gis-wkt-functions,  Up: creating-spatial-values

12.17.4.4 Creating Geometry Values Using WKB Functions
......................................................

MySQL provides a number of functions that take as arguments a *Note
`BLOB': blob. containing a Well-Known Binary representation and,
optionally, a spatial reference system identifier (SRID). They return
the corresponding geometry.

These functions also accept geometry objects for compatibility with the
return value of the functions in *Note gis-mysql-specific-functions::.
Thus, those functions may be used to provide the first argument to the
functions in this section.

   *  `GeomCollFromWKB(WKB[,SRID])',
     `GeometryCollectionFromWKB(WKB[,SRID])'

     Constructs a `GEOMETRYCOLLECTION' value using its WKB
     representation and SRID.

   *  `GeomFromWKB(WKB[,SRID])', `GeometryFromWKB(WKB[,SRID])'

     Constructs a geometry value of any type using its WKB
     representation and SRID.

   *  `LineFromWKB(WKB[,SRID])', `LineStringFromWKB(WKB[,SRID])'

     Constructs a `LINESTRING' value using its WKB representation and
     SRID.

   *  `MLineFromWKB(WKB[,SRID])', `MultiLineStringFromWKB(WKB[,SRID])'

     Constructs a `MULTILINESTRING' value using its WKB representation
     and SRID.

   *  `MPointFromWKB(WKB[,SRID])', `MultiPointFromWKB(WKB[,SRID])'

     Constructs a `MULTIPOINT' value using its WKB representation and
     SRID.

   *  `MPolyFromWKB(WKB[,SRID])', `MultiPolygonFromWKB(WKB[,SRID])'

     Constructs a `MULTIPOLYGON' value using its WKB representation and
     SRID.

   *  `PointFromWKB(WKB[,SRID])'

     Constructs a `POINT' value using its WKB representation and SRID.

   *  `PolyFromWKB(WKB[,SRID])', `PolygonFromWKB(WKB[,SRID])'

     Constructs a `POLYGON' value using its WKB representation and SRID.

The OpenGIS specification also describes optional functions for
constructing `Polygon' or `MultiPolygon' values based on the WKB
representation of a collection of rings or closed `LineString' values.
These values may intersect. MySQL does not implement these functions:

   *  `BdMPolyFromWKB(WKB,SRID)'

     Constructs a `MultiPolygon' value from a `MultiLineString' value
     in WKB format containing an arbitrary collection of closed
     `LineString' values.

   *  `BdPolyFromWKB(WKB,SRID)'

     Constructs a `Polygon' value from a `MultiLineString' value in WKB
     format containing an arbitrary collection of closed `LineString'
     values.


File: manual.info,  Node: gis-mysql-specific-functions,  Prev: gis-wkb-functions,  Up: creating-spatial-values

12.17.4.5 Creating Geometry Values Using MySQL-Specific Functions
.................................................................

MySQL provides a set of useful nonstandard functions for creating
geometry values. The functions described in this section are MySQL
extensions to the OpenGIS specification.

These functions produce geometry objects from either WKB values or
geometry objects as arguments. If any argument is not a proper WKB or
geometry representation of the proper object type, the return value is
`NULL'.

For example, you can insert the geometry return value from `Point()'
directly into a `Point' column:

     INSERT INTO t1 (pt_col) VALUES(Point(1,2));

   *  `GeometryCollection(G1,G2,...)'

     Constructs a `GeometryCollection'.

   *  `LineString(PT1,PT2,...)'

     Constructs a `LineString' value from a number of `Point' or WKB
     `Point' arguments. If the number of arguments is less than two,
     the return value is `NULL'.

   *  `MultiLineString(LS1,LS2,...)'

     Constructs a `MultiLineString' value using `LineString' or WKB
     `LineString' arguments.

   *  `MultiPoint(PT1,PT2,...)'

     Constructs a `MultiPoint' value using `Point' or WKB `Point'
     arguments.

   *  `MultiPolygon(POLY1,POLY2,...)'

     Constructs a `MultiPolygon' value from a set of `Polygon' or WKB
     `Polygon' arguments.

   *  `Point(X,Y)'

     Constructs a `Point' using its coordinates.

   *  `Polygon(LS1,LS2,...)'

     Constructs a `Polygon' value from a number of `LineString' or WKB
     `LineString' arguments. If any argument does not represent a
     `LinearRing' (that is, not a closed and simple `LineString'), the
     return value is `NULL'.


File: manual.info,  Node: creating-spatial-columns,  Next: populating-spatial-columns,  Prev: creating-spatial-values,  Up: creating-a-spatially-enabled-mysql-database

12.17.4.6 Creating Spatial Columns
..................................

MySQL provides a standard way of creating spatial columns for geometry
types, for example, with *Note `CREATE TABLE': create-table. or *Note
`ALTER TABLE': alter-table.  Currently, spatial columns are supported
for `MyISAM', `InnoDB', *Note `NDB': mysql-cluster, and `ARCHIVE'
tables. See also the annotations about spatial indexes under *Note
creating-spatial-indexes::.

   * Use the *Note `CREATE TABLE': create-table.  statement to create a
     table with a spatial column:

          CREATE TABLE geom (g GEOMETRY);

   * Use the *Note `ALTER TABLE': alter-table. statement to add or drop
     a spatial column to or from an existing table:

          ALTER TABLE geom ADD pt POINT;
          ALTER TABLE geom DROP pt;


File: manual.info,  Node: populating-spatial-columns,  Next: fetching-spatial-data,  Prev: creating-spatial-columns,  Up: creating-a-spatially-enabled-mysql-database

12.17.4.7 Populating Spatial Columns
....................................

After you have created spatial columns, you can populate them with
spatial data.

Values should be stored in internal geometry format, but you can
convert them to that format from either Well-Known Text (WKT) or
Well-Known Binary (WKB) format. The following examples demonstrate how
to insert geometry values into a table by converting WKT values into
internal geometry format:

   * Perform the conversion directly in the *Note `INSERT': insert.
     statement:

          INSERT INTO geom VALUES (GeomFromText('POINT(1 1)'));

          SET @g = 'POINT(1 1)';
          INSERT INTO geom VALUES (GeomFromText(@g));

   * Perform the conversion prior to the *Note `INSERT': insert.:

          SET @g = GeomFromText('POINT(1 1)');
          INSERT INTO geom VALUES (@g);

The following examples insert more complex geometries into the table:

     SET @g = 'LINESTRING(0 0,1 1,2 2)';
     INSERT INTO geom VALUES (GeomFromText(@g));

     SET @g = 'POLYGON((0 0,10 0,10 10,0 10,0 0),(5 5,7 5,7 7,5 7, 5 5))';
     INSERT INTO geom VALUES (GeomFromText(@g));

     SET @g =
     'GEOMETRYCOLLECTION(POINT(1 1),LINESTRING(0 0,1 1,2 2,3 3,4 4))';
     INSERT INTO geom VALUES (GeomFromText(@g));

The preceding examples all use `GeomFromText()' to create geometry
values. You can also use type-specific functions:

     SET @g = 'POINT(1 1)';
     INSERT INTO geom VALUES (PointFromText(@g));

     SET @g = 'LINESTRING(0 0,1 1,2 2)';
     INSERT INTO geom VALUES (LineStringFromText(@g));

     SET @g = 'POLYGON((0 0,10 0,10 10,0 10,0 0),(5 5,7 5,7 7,5 7, 5 5))';
     INSERT INTO geom VALUES (PolygonFromText(@g));

     SET @g =
     'GEOMETRYCOLLECTION(POINT(1 1),LINESTRING(0 0,1 1,2 2,3 3,4 4))';
     INSERT INTO geom VALUES (GeomCollFromText(@g));

Note that if a client application program wants to use WKB
representations of geometry values, it is responsible for sending
correctly formed WKB in queries to the server. However, there are
several ways of satisfying this requirement. For example:

   * Inserting a `POINT(1 1)' value with hex literal syntax:

          mysql> INSERT INTO geom VALUES
              -> (GeomFromWKB(0x0101000000000000000000F03F000000000000F03F));

   * An ODBC application can send a WKB representation, binding it to a
     placeholder using an argument of *Note `BLOB': blob. type:

          INSERT INTO geom VALUES (GeomFromWKB(?))

     Other programming interfaces may support a similar placeholder
     mechanism.

   * In a C program, you can escape a binary value using *Note
     `mysql_real_escape_string()': mysql-real-escape-string.  and
     include the result in a query string that is sent to the server.
     See *Note mysql-real-escape-string::.


File: manual.info,  Node: fetching-spatial-data,  Prev: populating-spatial-columns,  Up: creating-a-spatially-enabled-mysql-database

12.17.4.8 Fetching Spatial Data
...............................

Geometry values stored in a table can be fetched in internal format.
You can also convert them into WKT or WKB format.

   * Fetching spatial data in internal format:

     Fetching geometry values using internal format can be useful in
     table-to-table transfers:

          CREATE TABLE geom2 (g GEOMETRY) SELECT g FROM geom;

   * Fetching spatial data in WKT format:

     The `AsText()' function converts a geometry from internal format
     into a WKT string.

          SELECT AsText(g) FROM geom;

   * Fetching spatial data in WKB format:

     The `AsBinary()' function converts a geometry from internal format
     into a *Note `BLOB': blob. containing the WKB value.

          SELECT AsBinary(g) FROM geom;


File: manual.info,  Node: spatial-analysis-functions,  Next: optimizing-spatial-analysis,  Prev: creating-a-spatially-enabled-mysql-database,  Up: spatial-extensions

12.17.5 Spatial Analysis Functions
----------------------------------

* Menu:

* functions-to-convert-geometries-between-formats::  Geometry Format Conversion Functions
* geometry-property-functions::  `Geometry' Property Functions
* functions-that-create-new-geometries-from-existing-ones::  Functions That Create New Geometries from Existing Ones
* functions-for-testing-spatial-relations-between-geometric-objects::  Functions for Testing Spatial Relations Between Geometric Objects

After populating spatial columns with values, you are ready to query
and analyze them. MySQL provides a set of functions to perform various
operations on spatial data. These functions can be grouped into four
major categories according to the type of operation they perform:

   * Functions that convert geometries between various formats

   * Functions that provide access to qualitative or quantitative
     properties of a geometry

   * Functions that describe relations between two geometries

   * Functions that create new geometries from existing ones

Spatial analysis functions can be used in many contexts, such as:

   * Any interactive SQL program, such as *Note `mysql': mysql.

   * Application programs written in any language that supports a MySQL
     client API


File: manual.info,  Node: functions-to-convert-geometries-between-formats,  Next: geometry-property-functions,  Prev: spatial-analysis-functions,  Up: spatial-analysis-functions

12.17.5.1 Geometry Format Conversion Functions
..............................................

MySQL supports the following functions for converting geometry values
between internal format and either WKT or WKB format:

   *  `AsBinary(G)', `AsWKB(G)'

     Converts a value in internal geometry format to its WKB
     representation and returns the binary result.

          SELECT AsBinary(g) FROM geom;

   *  `AsText(G)', `AsWKT(G)'

     Converts a value in internal geometry format to its WKT
     representation and returns the string result.

          mysql> SET @g = 'LineString(1 1,2 2,3 3)';
          mysql> SELECT AsText(GeomFromText(@g));
          +--------------------------+
          | AsText(GeomFromText(@g)) |
          +--------------------------+
          | LINESTRING(1 1,2 2,3 3)  |
          +--------------------------+

   * `GeomFromText(WKT[,SRID])'

     Converts a string value from its WKT representation into internal
     geometry format and returns the result. A number of type-specific
     functions are also supported, such as `PointFromText()' and
     `LineFromText()'. See *Note gis-wkt-functions::.

   * `GeomFromWKB(WKB[,SRID])'

     Converts a binary value from its WKB representation into internal
     geometry format and returns the result. A number of type-specific
     functions are also supported, such as `PointFromWKB()' and
     `LineFromWKB()'. See *Note gis-wkb-functions::.


File: manual.info,  Node: geometry-property-functions,  Next: functions-that-create-new-geometries-from-existing-ones,  Prev: functions-to-convert-geometries-between-formats,  Up: spatial-analysis-functions

12.17.5.2 `Geometry' Property Functions
.......................................

* Menu:

* general-geometry-property-functions::  General Geometry Functions
* point-property-functions::     `Point' Functions
* linestring-property-functions::  `LineString' Functions
* multilinestring-property-functions::  `MultiLineString' Functions
* polygon-property-functions::   `Polygon' Functions
* multipolygon-property-functions::  `MultiPolygon' Functions
* geometrycollection-property-functions::  `GeometryCollection' Functions

Each function that belongs to this group takes a geometry value as its
argument and returns some quantitative or qualitative property of the
geometry. Some functions restrict their argument type. Such functions
return `NULL' if the argument is of an incorrect geometry type. For
example, `Area()' returns `NULL' if the object type is neither
`Polygon' nor `MultiPolygon'.


File: manual.info,  Node: general-geometry-property-functions,  Next: point-property-functions,  Prev: geometry-property-functions,  Up: geometry-property-functions

12.17.5.3 General Geometry Functions
....................................

The functions listed in this section do not restrict their argument and
accept a geometry value of any type.

   *  `Dimension(G)'

     Returns the inherent dimension of the geometry value G. The result
     can be -1, 0, 1, or 2. The meaning of these values is given in
     *Note gis-class-geometry::.

          mysql> SELECT Dimension(GeomFromText('LineString(1 1,2 2)'));
          +------------------------------------------------+
          | Dimension(GeomFromText('LineString(1 1,2 2)')) |
          +------------------------------------------------+
          |                                              1 |
          +------------------------------------------------+

   *  `Envelope(G)'

     Returns the Minimum Bounding Rectangle (MBR) for the geometry
     value G. The result is returned as a `Polygon' value.

     The polygon is defined by the corner points of the bounding box:

          POLYGON((MINX MINY, MAXX MINY, MAXX MAXY, MINX MAXY, MINX MINY))

          mysql> SELECT AsText(Envelope(GeomFromText('LineString(1 1,2 2)')));
          +-------------------------------------------------------+
          | AsText(Envelope(GeomFromText('LineString(1 1,2 2)'))) |
          +-------------------------------------------------------+
          | POLYGON((1 1,2 1,2 2,1 2,1 1))                        |
          +-------------------------------------------------------+

   *  `GeometryType(G)'

     Returns as a binary string the name of the geometry type of which
     the geometry instance G is a member. The name corresponds to one
     of the instantiable `Geometry' subclasses.

          mysql> SELECT GeometryType(GeomFromText('POINT(1 1)'));
          +------------------------------------------+
          | GeometryType(GeomFromText('POINT(1 1)')) |
          +------------------------------------------+
          | POINT                                    |
          +------------------------------------------+

   *  `SRID(G)'

     Returns an integer indicating the Spatial Reference System ID for
     the geometry value G.

     In MySQL, the SRID value is just an integer associated with the
     geometry value. All calculations are done assuming Euclidean
     (planar) geometry.

          mysql> SELECT SRID(GeomFromText('LineString(1 1,2 2)',101));
          +-----------------------------------------------+
          | SRID(GeomFromText('LineString(1 1,2 2)',101)) |
          +-----------------------------------------------+
          |                                           101 |
          +-----------------------------------------------+

The OpenGIS specification also defines the following functions, which
MySQL does not implement:

   *  `Boundary(G)'

     Returns a geometry that is the closure of the combinatorial
     boundary of the geometry value G.

   *  `IsEmpty(G)'

     This function is a placeholder that returns 0 for any valid
     geometry value, 1 for any invalid geometry value or `NULL'.

     MySQL does not support GIS `EMPTY' values such as `POINT EMPTY'.

   *  `IsSimple(G)'

     In MySQL 5.5, this function is a placeholder that always returns 0.

     The description of each instantiable geometric class given earlier
     in the chapter includes the specific conditions that cause an
     instance of that class to be classified as not simple. (See *Note
     gis-geometry-class-hierarchy::.)


File: manual.info,  Node: point-property-functions,  Next: linestring-property-functions,  Prev: general-geometry-property-functions,  Up: geometry-property-functions

12.17.5.4 `Point' Functions
...........................

A `Point' consists of X and Y coordinates, which may be obtained using
the following functions:

   *  `X(P)'

     Returns the X-coordinate value for the `Point' object P as a
     double-precision number.

          mysql> SELECT X(POINT(56.7, 53.34));
          +-----------------------+
          | X(POINT(56.7, 53.34)) |
          +-----------------------+
          |                  56.7 |
          +-----------------------+

   *  `Y(P)'

     Returns the Y-coordinate value for the `Point' object P as a
     double-precision number.

          mysql> SELECT Y(POINT(56.7, 53.34));
          +-----------------------+
          | Y(POINT(56.7, 53.34)) |
          +-----------------------+
          |                 53.34 |
          +-----------------------+


File: manual.info,  Node: linestring-property-functions,  Next: multilinestring-property-functions,  Prev: point-property-functions,  Up: geometry-property-functions

12.17.5.5 `LineString' Functions
................................

A `LineString' consists of `Point' values. You can extract particular
points of a `LineString', count the number of points that it contains,
or obtain its length.

   *  `EndPoint(LS)'

     Returns the `Point' that is the endpoint of the `LineString' value
     LS.

          mysql> SET @ls = 'LineString(1 1,2 2,3 3)';
          mysql> SELECT AsText(EndPoint(GeomFromText(@ls)));
          +-------------------------------------+
          | AsText(EndPoint(GeomFromText(@ls))) |
          +-------------------------------------+
          | POINT(3 3)                          |
          +-------------------------------------+

   *  `GLength(LS)'

     Returns as a double-precision number the length of the
     `LineString' value LS in its associated spatial reference.

          mysql> SET @ls = 'LineString(1 1,2 2,3 3)';
          mysql> SELECT GLength(GeomFromText(@ls));
          +----------------------------+
          | GLength(GeomFromText(@ls)) |
          +----------------------------+
          |            2.8284271247462 |
          +----------------------------+

     `GLength()' is a nonstandard name. It corresponds to the OpenGIS
     `Length()' function.

   *  `IsClosed(LS)'

     Returns 1 if the `LineString' value LS is closed (that is, its
     `StartPoint()' and `EndPoint()' values are the same) and is simple
     (does not pass through the same point more than once). Returns 0 if
     LS is not closed, and -1 if it is `NULL'.

          mysql> SET @ls1 = '`LineString'(1 1,2 2,3 3,2 2)';
          Query OK, 0 rows affected (0.00 sec)

          mysql> SET @ls2 = 'LineString(1 1,2 2,3 3,1 1)';
          Query OK, 0 rows affected (0.00 sec)

          mysql> SELECT IsClosed(`GeomFromText'(@ls1));
          +------------------------------+
          | IsClosed(GeomFromText(@ls1)) |
          +------------------------------+
          |                            0 |
          +------------------------------+
          1 row in set (0.00 sec)

          mysql> SELECT IsClosed(GeomFromText(@ls2));
          +------------------------------+
          | IsClosed(GeomFromText(@ls2)) |
          +------------------------------+
          |                            1 |
          +------------------------------+
          1 row in set (0.00 sec)

   *  `NumPoints(LS)'

     Returns the number of `Point' objects in the `LineString' value LS.

          mysql> SET @ls = 'LineString(1 1,2 2,3 3)';
          mysql> SELECT NumPoints(GeomFromText(@ls));
          +------------------------------+
          | NumPoints(GeomFromText(@ls)) |
          +------------------------------+
          |                            3 |
          +------------------------------+

   *  `PointN(LS,N)'

     Returns the N-th `Point' in the `Linestring' value LS. Points are
     numbered beginning with 1.

          mysql> SET @ls = 'LineString(1 1,2 2,3 3)';
          mysql> SELECT AsText(PointN(GeomFromText(@ls),2));
          +-------------------------------------+
          | AsText(PointN(GeomFromText(@ls),2)) |
          +-------------------------------------+
          | POINT(2 2)                          |
          +-------------------------------------+

   *  `StartPoint(LS)'

     Returns the `Point' that is the start point of the `LineString'
     value LS.

          mysql> SET @ls = 'LineString(1 1,2 2,3 3)';
          mysql> SELECT AsText(StartPoint(GeomFromText(@ls)));
          +---------------------------------------+
          | AsText(StartPoint(GeomFromText(@ls))) |
          +---------------------------------------+
          | POINT(1 1)                            |
          +---------------------------------------+


File: manual.info,  Node: multilinestring-property-functions,  Next: polygon-property-functions,  Prev: linestring-property-functions,  Up: geometry-property-functions

12.17.5.6 `MultiLineString' Functions
.....................................

These functions return properties of `MultiLineString' values.

   * `GLength(MLS)'

     Returns as a double-precision number the length of the
     `MultiLineString' value MLS. The length of MLS is equal to the sum
     of the lengths of its elements.

          mysql> SET @mls = 'MultiLineString((1 1,2 2,3 3),(4 4,5 5))';
          mysql> SELECT GLength(GeomFromText(@mls));
          +-----------------------------+
          | GLength(GeomFromText(@mls)) |
          +-----------------------------+
          |             4.2426406871193 |
          +-----------------------------+

     `GLength()' is a nonstandard name. It corresponds to the OpenGIS
     `Length()' function.

   * `IsClosed(MLS)'

     Returns 1 if the `MultiLineString' value MLS is closed (that is,
     the `StartPoint()' and `EndPoint()' values are the same for each
     `LineString' in MLS). Returns 0 if MLS is not closed, and -1 if it
     is `NULL'.

          mysql> SET @mls = 'MultiLineString((1 1,2 2,3 3),(4 4,5 5))';
          mysql> SELECT IsClosed(GeomFromText(@mls));
          +------------------------------+
          | IsClosed(GeomFromText(@mls)) |
          +------------------------------+
          |                            0 |
          +------------------------------+


File: manual.info,  Node: polygon-property-functions,  Next: multipolygon-property-functions,  Prev: multilinestring-property-functions,  Up: geometry-property-functions

12.17.5.7 `Polygon' Functions
.............................

These functions return properties of `Polygon' values.

   *  `Area(POLY)'

     Returns as a double-precision number the area of the `Polygon'
     value POLY, as measured in its spatial reference system.

          mysql> SET @poly = 'Polygon((0 0,0 3,3 0,0 0),(1 1,1 2,2 1,1 1))';
          mysql> SELECT Area(GeomFromText(@poly));
          +---------------------------+
          | Area(GeomFromText(@poly)) |
          +---------------------------+
          |                         4 |
          +---------------------------+

   *  `ExteriorRing(POLY)'

     Returns the exterior ring of the `Polygon' value POLY as a
     `LineString'.

          mysql> SET @poly =
              -> 'Polygon((0 0,0 3,3 3,3 0,0 0),(1 1,1 2,2 2,2 1,1 1))';
          mysql> SELECT AsText(ExteriorRing(GeomFromText(@poly)));
          +-------------------------------------------+
          | AsText(ExteriorRing(GeomFromText(@poly))) |
          +-------------------------------------------+
          | LINESTRING(0 0,0 3,3 3,3 0,0 0)           |
          +-------------------------------------------+

   *  `InteriorRingN(POLY,N)'

     Returns the N-th interior ring for the `Polygon' value POLY as a
     `LineString'. Rings are numbered beginning with 1.

          mysql> SET @poly =
              -> 'Polygon((0 0,0 3,3 3,3 0,0 0),(1 1,1 2,2 2,2 1,1 1))';
          mysql> SELECT AsText(InteriorRingN(GeomFromText(@poly),1));
          +----------------------------------------------+
          | AsText(InteriorRingN(GeomFromText(@poly),1)) |
          +----------------------------------------------+
          | LINESTRING(1 1,1 2,2 2,2 1,1 1)              |
          +----------------------------------------------+

   *  `NumInteriorRings(POLY)'

     Returns the number of interior rings in the `Polygon' value POLY.

          mysql> SET @poly =
              -> 'Polygon((0 0,0 3,3 3,3 0,0 0),(1 1,1 2,2 2,2 1,1 1))';
          mysql> SELECT NumInteriorRings(GeomFromText(@poly));
          +---------------------------------------+
          | NumInteriorRings(GeomFromText(@poly)) |
          +---------------------------------------+
          |                                     1 |
          +---------------------------------------+


File: manual.info,  Node: multipolygon-property-functions,  Next: geometrycollection-property-functions,  Prev: polygon-property-functions,  Up: geometry-property-functions

12.17.5.8 `MultiPolygon' Functions
..................................

These functions return properties of `MultiPolygon' values.

   * `Area(MPOLY)'

     Returns as a double-precision number the area of the
     `MultiPolygon' value MPOLY, as measured in its spatial reference
     system.

          mysql> SET @mpoly =
              -> 'MultiPolygon(((0 0,0 3,3 3,3 0,0 0),(1 1,1 2,2 2,2 1,1 1)))';
          mysql> SELECT Area(GeomFromText(@mpoly));
          +----------------------------+
          | Area(GeomFromText(@mpoly)) |
          +----------------------------+
          |                          8 |
          +----------------------------+

   *  `Centroid(MPOLY)'

     Returns the mathematical centroid for the `MultiPolygon' value
     MPOLY as a `Point'. The result is not guaranteed to be on the
     `MultiPolygon'.

          mysql> SET @poly =
              -> GeomFromText('POLYGON((0 0,10 0,10 10,0 10,0 0),(5 5,7 5,7 7,5 7,5 5))');
          mysql> SELECT GeometryType(@poly),AsText(Centroid(@poly));
          +---------------------+--------------------------------------------+
          | GeometryType(@poly) | AsText(Centroid(@poly))                    |
          +---------------------+--------------------------------------------+
          | POLYGON             | POINT(4.958333333333333 4.958333333333333) |
          +---------------------+--------------------------------------------+

The OpenGIS specification also defines the following function, which
MySQL does not implement:

   * `PointOnSurface(MPOLY)'

     Returns a `Point' value that is guaranteed to be on the
     `MultiPolygon' value MPOLY.


File: manual.info,  Node: geometrycollection-property-functions,  Prev: multipolygon-property-functions,  Up: geometry-property-functions

12.17.5.9 `GeometryCollection' Functions
........................................

These functions return properties of `GeometryCollection' values.

   *  `GeometryN(GC,N)'

     Returns the N-th geometry in the `GeometryCollection' value GC.
     Geometries are numbered beginning with 1.

          mysql> SET @gc = 'GeometryCollection(Point(1 1),LineString(2 2, 3 3))';
          mysql> SELECT AsText(GeometryN(GeomFromText(@gc),1));
          +----------------------------------------+
          | AsText(GeometryN(GeomFromText(@gc),1)) |
          +----------------------------------------+
          | POINT(1 1)                             |
          +----------------------------------------+

   *  `NumGeometries(GC)'

     Returns the number of geometries in the `GeometryCollection' value
     GC.

          mysql> SET @gc = 'GeometryCollection(Point(1 1),LineString(2 2, 3 3))';
          mysql> SELECT NumGeometries(GeomFromText(@gc));
          +----------------------------------+
          | NumGeometries(GeomFromText(@gc)) |
          +----------------------------------+
          |                                2 |
          +----------------------------------+


File: manual.info,  Node: functions-that-create-new-geometries-from-existing-ones,  Next: functions-for-testing-spatial-relations-between-geometric-objects,  Prev: geometry-property-functions,  Up: spatial-analysis-functions

12.17.5.10 Functions That Create New Geometries from Existing Ones
..................................................................

* Menu:

* functions-that-produce-new-geometries::  Geometry Functions That Produce New Geometries
* spatial-operators::            Spatial Operators

The following sections describe functions that take geometry values as
arguments and return new geometry values.


File: manual.info,  Node: functions-that-produce-new-geometries,  Next: spatial-operators,  Prev: functions-that-create-new-geometries-from-existing-ones,  Up: functions-that-create-new-geometries-from-existing-ones

12.17.5.11 Geometry Functions That Produce New Geometries
.........................................................

*Note geometry-property-functions::, discusses several functions that
construct new geometries from existing ones. See that section for
descriptions of these functions:

   * `Envelope(G)'

   * `StartPoint(LS)'

   * `EndPoint(LS)'

   * `PointN(LS,N)'

   * `ExteriorRing(POLY)'

   * `InteriorRingN(POLY,N)'

   * `GeometryN(GC,N)'


File: manual.info,  Node: spatial-operators,  Prev: functions-that-produce-new-geometries,  Up: functions-that-create-new-geometries-from-existing-ones

12.17.5.12 Spatial Operators
............................

OpenGIS proposes a number of other functions that can produce
geometries. They are designed to implement spatial operators.

These functions are not implemented in MySQL.

   *  `Buffer(G,D)'

     Returns a geometry that represents all points whose distance from
     the geometry value G is less than or equal to a distance of D.

   *  `ConvexHull(G)'

     Returns a geometry that represents the convex hull of the geometry
     value G.

   *  `Difference(G1,G2)'

     Returns a geometry that represents the point set difference of the
     geometry value G1 with G2.

   *  `Intersection(G1,G2)'

     Returns a geometry that represents the point set intersection of
     the geometry values G1 with G2.

   *  `SymDifference(G1,G2)'

     Returns a geometry that represents the point set symmetric
     difference of the geometry value G1 with G2.

   *  `Union(G1,G2)'

     Returns a geometry that represents the point set union of the
     geometry values G1 and G2.


File: manual.info,  Node: functions-for-testing-spatial-relations-between-geometric-objects,  Prev: functions-that-create-new-geometries-from-existing-ones,  Up: spatial-analysis-functions

12.17.5.13 Functions for Testing Spatial Relations Between Geometric Objects
............................................................................

* Menu:

* relations-on-geometry-mbr::    Relations on Geometry Minimal Bounding Rectangles (MBRs)
* functions-that-test-spatial-relationships-between-geometries::  Functions That Test Spatial Relationships Between Geometries

The functions described in these sections take two geometries as input
parameters and return a qualitative or quantitative relation between
them.


File: manual.info,  Node: relations-on-geometry-mbr,  Next: functions-that-test-spatial-relationships-between-geometries,  Prev: functions-for-testing-spatial-relations-between-geometric-objects,  Up: functions-for-testing-spatial-relations-between-geometric-objects

12.17.5.14 Relations on Geometry Minimal Bounding Rectangles (MBRs)
...................................................................

MySQL provides several functions that test relations between minimal
bounding rectangles of two geometries `g1' and `g2'. The return values
1 and 0 indicate true and false, respectively.

   *  `MBRContains(G1,G2)'

     Returns 1 or 0 to indicate whether the Minimum Bounding Rectangle
     of G1 contains the Minimum Bounding Rectangle of G2. This tests
     the opposite relationship as `MBRWithin()'.

          mysql> SET @g1 = GeomFromText('Polygon((0 0,0 3,3 3,3 0,0 0))');
          mysql> SET @g2 = GeomFromText('Point(1 1)');
          mysql> SELECT MBRContains(@g1,@g2), MBRContains(@g2,@g1);
          ----------------------+----------------------+
          | MBRContains(@g1,@g2) | MBRContains(@g2,@g1) |
          +----------------------+----------------------+
          |                    1 |                    0 |
          +----------------------+----------------------+

   *  `MBRDisjoint(G1,G2)'

     Returns 1 or 0 to indicate whether the Minimum Bounding Rectangles
     of the two geometries G1 and G2 are disjoint (do not intersect).

   *  `MBREqual(G1,G2)'

     Returns 1 or 0 to indicate whether the Minimum Bounding Rectangles
     of the two geometries G1 and G2 are the same.

   *  `MBRIntersects(G1,G2)'

     Returns 1 or 0 to indicate whether the Minimum Bounding Rectangles
     of the two geometries G1 and G2 intersect.

   *  `MBROverlaps(G1,G2)'

     Returns 1 or 0 to indicate whether the Minimum Bounding Rectangles
     of the two geometries G1 and G2 overlap. The term _spatially
     overlaps_ is used if two geometries intersect and their
     intersection results in a geometry of the same dimension but not
     equal to either of the given geometries.

   *  `MBRTouches(G1,G2)'

     Returns 1 or 0 to indicate whether the Minimum Bounding Rectangles
     of the two geometries G1 and G2 touch. Two geometries _spatially
     touch_ if the interiors of the geometries do not intersect, but
     the boundary of one of the geometries intersects either the
     boundary or the interior of the other.

   *  `MBRWithin(G1,G2)'

     Returns 1 or 0 to indicate whether the Minimum Bounding Rectangle
     of G1 is within the Minimum Bounding Rectangle of G2. This tests
     the opposite relationship as `MBRContains()'.

          mysql> SET @g1 = GeomFromText('Polygon((0 0,0 3,3 3,3 0,0 0))');
          mysql> SET @g2 = GeomFromText('Polygon((0 0,0 5,5 5,5 0,0 0))');
          mysql> SELECT MBRWithin(@g1,@g2), MBRWithin(@g2,@g1);
          +--------------------+--------------------+
          | MBRWithin(@g1,@g2) | MBRWithin(@g2,@g1) |
          +--------------------+--------------------+
          |                  1 |                  0 |
          +--------------------+--------------------+


File: manual.info,  Node: functions-that-test-spatial-relationships-between-geometries,  Prev: relations-on-geometry-mbr,  Up: functions-for-testing-spatial-relations-between-geometric-objects

12.17.5.15 Functions That Test Spatial Relationships Between Geometries
.......................................................................

The OpenGIS specification defines the following functions.  They test
the relationship between two geometry values `g1' and `g2'.

The return values 1 and 0 indicate true and false, respectively.

*Note*:

Currently, MySQL does not implement these functions according to the
specification. Those that are implemented return the same result as the
corresponding MBR-based functions.

   *  `Contains(G1,G2)'

     Returns 1 or 0 to indicate whether G1 completely contains G2. This
     tests the opposite relationship as `Within()'.

   *  `Crosses(G1,G2)'

     Returns 1 if G1 spatially crosses G2. Returns `NULL' if `g1' is a
     `Polygon' or a `MultiPolygon', or if G2 is a `Point' or a
     `MultiPoint'. Otherwise, returns 0.

     The term _spatially crosses_ denotes a spatial relation between
     two given geometries that has the following properties:

        * The two geometries intersect

        * Their intersection results in a geometry that has a dimension
          that is one less than the maximum dimension of the two given
          geometries

        * Their intersection is not equal to either of the two given
          geometries

   *  `Disjoint(G1,G2)'

     Returns 1 or 0 to indicate whether G1 is spatially disjoint from
     (does not intersect) G2.

   *  `Equals(G1,G2)'

     Returns 1 or 0 to indicate whether G1 is spatially equal to G2.

   *  `Intersects(G1,G2)'

     Returns 1 or 0 to indicate whether G1 spatially intersects G2.

   *  `Overlaps(G1,G2)'

     Returns 1 or 0 to indicate whether G1 spatially overlaps G2. The
     term _spatially overlaps_ is used if two geometries intersect and
     their intersection results in a geometry of the same dimension but
     not equal to either of the given geometries.

   *  `Touches(G1,G2)'

     Returns 1 or 0 to indicate whether G1 spatially touches G2. Two
     geometries _spatially touch_ if the interiors of the geometries do
     not intersect, but the boundary of one of the geometries
     intersects either the boundary or the interior of the other.

   *  `Within(G1,G2)'

     Returns 1 or 0 to indicate whether G1 is spatially within G2. This
     tests the opposite relationship as `Contains()'.


File: manual.info,  Node: optimizing-spatial-analysis,  Next: mysql-gis-conformance-and-compatibility,  Prev: spatial-analysis-functions,  Up: spatial-extensions

12.17.6 Optimizing Spatial Analysis
-----------------------------------

* Menu:

* creating-spatial-indexes::     Creating Spatial Indexes
* using-a-spatial-index::        Using a Spatial Index

For *Note `MyISAM': myisam-storage-engine. tables, Search operations in
nonspatial databases can be optimized using `SPATIAL' indexes. This is
true for spatial databases as well. With the help of a great variety of
multi-dimensional indexing methods that have previously been designed,
it is possible to optimize spatial searches. The most typical of these
are:

   * Point queries that search for all objects that contain a given
     point

   * Region queries that search for all objects that overlap a given
     region

MySQL uses *R-Trees with quadratic splitting* for `SPATIAL' indexes on
spatial columns. A `SPATIAL' index is built using the MBR of a
geometry. For most geometries, the MBR is a minimum rectangle that
surrounds the geometries. For a horizontal or a vertical linestring,
the MBR is a rectangle degenerated into the linestring. For a point,
the MBR is a rectangle degenerated into the point.

It is also possible to create normal indexes on spatial columns.  In a
non-`SPATIAL' index, you must declare a prefix for any spatial column
except for `POINT' columns.

`MyISAM' supports both `SPATIAL' and non-`SPATIAL' indexes. Other
storage engines support non-`SPATIAL' indexes, as described in *Note
create-index::.


File: manual.info,  Node: creating-spatial-indexes,  Next: using-a-spatial-index,  Prev: optimizing-spatial-analysis,  Up: optimizing-spatial-analysis

12.17.6.1 Creating Spatial Indexes
..................................

For *Note `MyISAM': myisam-storage-engine. tables, MySQL can create
spatial indexes using syntax similar to that for creating regular
indexes, but extended with the `SPATIAL' keyword. Currently, columns in
spatial indexes must be declared `NOT NULL'.  The following examples
demonstrate how to create spatial indexes:

   * With *Note `CREATE TABLE': create-table.:

          CREATE TABLE geom (g GEOMETRY NOT NULL, SPATIAL INDEX(g)) ENGINE=MyISAM;

   * With *Note `ALTER TABLE': alter-table.:

          ALTER TABLE geom ADD SPATIAL INDEX(g);

   * With *Note `CREATE INDEX': create-index.:

          CREATE SPATIAL INDEX sp_index ON geom (g);

For `MyISAM' tables, `SPATIAL INDEX' creates an R-tree index. For
storage engines that support nonspatial indexing of spatial columns,
the engine creates a B-tree index. A B-tree index on spatial values
will be useful for exact-value lookups, but not for range scans.

For more information on indexing spatial columns, see *Note
create-index::.

To drop spatial indexes, use *Note `ALTER TABLE': alter-table. or *Note
`DROP INDEX': drop-index.:

   * With *Note `ALTER TABLE': alter-table.:

          ALTER TABLE geom DROP INDEX g;

   * With *Note `DROP INDEX': drop-index.:

          DROP INDEX sp_index ON geom;

Example: Suppose that a table `geom' contains more than 32,000
geometries, which are stored in the column `g' of type `GEOMETRY'. The
table also has an `AUTO_INCREMENT' column `fid' for storing object ID
values.

     mysql> DESCRIBE geom;
     +-------+----------+------+-----+---------+----------------+
     | Field | Type     | Null | Key | Default | Extra          |
     +-------+----------+------+-----+---------+----------------+
     | fid   | int(11)  |      | PRI | NULL    | auto_increment |
     | g     | geometry |      |     |         |                |
     +-------+----------+------+-----+---------+----------------+
     2 rows in set (0.00 sec)

     mysql> SELECT COUNT(*) FROM geom;
     +----------+
     | count(*) |
     +----------+
     |    32376 |
     +----------+
     1 row in set (0.00 sec)

To add a spatial index on the column `g', use this statement:

     mysql> ALTER TABLE geom ADD SPATIAL INDEX(g);
     Query OK, 32376 rows affected (4.05 sec)
     Records: 32376  Duplicates: 0  Warnings: 0


File: manual.info,  Node: using-a-spatial-index,  Prev: creating-spatial-indexes,  Up: optimizing-spatial-analysis

12.17.6.2 Using a Spatial Index
...............................

The optimizer investigates whether available spatial indexes can be
involved in the search for queries that use a function such as
`MBRContains()' or `MBRWithin()' in the `WHERE' clause. The following
query finds all objects that are in the given rectangle:

     mysql> SET @poly =
         -> 'Polygon((30000 15000,
                                    31000 15000,
                                    31000 16000,
                                    30000 16000,
                                    30000 15000))';
     mysql> SELECT fid,AsText(g) FROM geom WHERE
         -> MBRContains(GeomFromText(@poly),g);
     +-----+---------------------------------------------------------------+
     | fid | AsText(g)                                                     |
     +-----+---------------------------------------------------------------+
     |  21 | LINESTRING(30350.4 15828.8,30350.6 15845,30333.8 15845,30 ... |
     |  22 | LINESTRING(30350.6 15871.4,30350.6 15887.8,30334 15887.8, ... |
     |  23 | LINESTRING(30350.6 15914.2,30350.6 15930.4,30334 15930.4, ... |
     |  24 | LINESTRING(30290.2 15823,30290.2 15839.4,30273.4 15839.4, ... |
     |  25 | LINESTRING(30291.4 15866.2,30291.6 15882.4,30274.8 15882. ... |
     |  26 | LINESTRING(30291.6 15918.2,30291.6 15934.4,30275 15934.4, ... |
     | 249 | LINESTRING(30337.8 15938.6,30337.8 15946.8,30320.4 15946. ... |
     |   1 | LINESTRING(30250.4 15129.2,30248.8 15138.4,30238.2 15136. ... |
     |   2 | LINESTRING(30220.2 15122.8,30217.2 15137.8,30207.6 15136, ... |
     |   3 | LINESTRING(30179 15114.4,30176.6 15129.4,30167 15128,3016 ... |
     |   4 | LINESTRING(30155.2 15121.4,30140.4 15118.6,30142 15109,30 ... |
     |   5 | LINESTRING(30192.4 15085,30177.6 15082.2,30179.2 15072.4, ... |
     |   6 | LINESTRING(30244 15087,30229 15086.2,30229.4 15076.4,3024 ... |
     |   7 | LINESTRING(30200.6 15059.4,30185.6 15058.6,30186 15048.8, ... |
     |  10 | LINESTRING(30179.6 15017.8,30181 15002.8,30190.8 15003.6, ... |
     |  11 | LINESTRING(30154.2 15000.4,30168.6 15004.8,30166 15014.2, ... |
     |  13 | LINESTRING(30105 15065.8,30108.4 15050.8,30118 15053,3011 ... |
     | 154 | LINESTRING(30276.2 15143.8,30261.4 15141,30263 15131.4,30 ... |
     | 155 | LINESTRING(30269.8 15084,30269.4 15093.4,30258.6 15093,30 ... |
     | 157 | LINESTRING(30128.2 15011,30113.2 15010.2,30113.6 15000.4, ... |
     +-----+---------------------------------------------------------------+
     20 rows in set (0.00 sec)

Use *Note `EXPLAIN': explain. to check the way this query is executed:

     mysql> SET @poly =
         -> 'Polygon((30000 15000,
                                    31000 15000,
                                    31000 16000,
                                    30000 16000,
                                    30000 15000))';
     mysql> EXPLAIN SELECT fid,AsText(g) FROM geom WHERE
         -> MBRContains(GeomFromText(@poly),g)\G
     *************************** 1. row ***************************
                id: 1
       select_type: SIMPLE
             table: geom
              type: range
     possible_keys: g
               key: g
           key_len: 32
               ref: NULL
              rows: 50
             Extra: Using where
     1 row in set (0.00 sec)

Check what would happen without a spatial index:

     mysql> SET @poly =
         -> 'Polygon((30000 15000,
                                    31000 15000,
                                    31000 16000,
                                    30000 16000,
                                    30000 15000))';
     mysql> EXPLAIN SELECT fid,AsText(g) FROM g IGNORE INDEX (g) WHERE
         -> MBRContains(GeomFromText(@poly),g)\G
     *************************** 1. row ***************************
                id: 1
       select_type: SIMPLE
             table: geom
              type: ALL
     possible_keys: NULL
               key: NULL
           key_len: NULL
               ref: NULL
              rows: 32376
             Extra: Using where
     1 row in set (0.00 sec)

Executing the *Note `SELECT': select. statement without the spatial
index yields the same result but causes the execution time to rise from
0.00 seconds to 0.46 seconds:

     mysql> SET @poly =
         -> 'Polygon((30000 15000,
                                    31000 15000,
                                    31000 16000,
                                    30000 16000,
                                    30000 15000))';
     mysql> SELECT fid,AsText(g) FROM geom IGNORE INDEX (g) WHERE
         -> MBRContains(GeomFromText(@poly),g);
     +-----+---------------------------------------------------------------+
     | fid | AsText(g)                                                     |
     +-----+---------------------------------------------------------------+
     |   1 | LINESTRING(30250.4 15129.2,30248.8 15138.4,30238.2 15136. ... |
     |   2 | LINESTRING(30220.2 15122.8,30217.2 15137.8,30207.6 15136, ... |
     |   3 | LINESTRING(30179 15114.4,30176.6 15129.4,30167 15128,3016 ... |
     |   4 | LINESTRING(30155.2 15121.4,30140.4 15118.6,30142 15109,30 ... |
     |   5 | LINESTRING(30192.4 15085,30177.6 15082.2,30179.2 15072.4, ... |
     |   6 | LINESTRING(30244 15087,30229 15086.2,30229.4 15076.4,3024 ... |
     |   7 | LINESTRING(30200.6 15059.4,30185.6 15058.6,30186 15048.8, ... |
     |  10 | LINESTRING(30179.6 15017.8,30181 15002.8,30190.8 15003.6, ... |
     |  11 | LINESTRING(30154.2 15000.4,30168.6 15004.8,30166 15014.2, ... |
     |  13 | LINESTRING(30105 15065.8,30108.4 15050.8,30118 15053,3011 ... |
     |  21 | LINESTRING(30350.4 15828.8,30350.6 15845,30333.8 15845,30 ... |
     |  22 | LINESTRING(30350.6 15871.4,30350.6 15887.8,30334 15887.8, ... |
     |  23 | LINESTRING(30350.6 15914.2,30350.6 15930.4,30334 15930.4, ... |
     |  24 | LINESTRING(30290.2 15823,30290.2 15839.4,30273.4 15839.4, ... |
     |  25 | LINESTRING(30291.4 15866.2,30291.6 15882.4,30274.8 15882. ... |
     |  26 | LINESTRING(30291.6 15918.2,30291.6 15934.4,30275 15934.4, ... |
     | 154 | LINESTRING(30276.2 15143.8,30261.4 15141,30263 15131.4,30 ... |
     | 155 | LINESTRING(30269.8 15084,30269.4 15093.4,30258.6 15093,30 ... |
     | 157 | LINESTRING(30128.2 15011,30113.2 15010.2,30113.6 15000.4, ... |
     | 249 | LINESTRING(30337.8 15938.6,30337.8 15946.8,30320.4 15946. ... |
     +-----+---------------------------------------------------------------+
     20 rows in set (0.46 sec)


File: manual.info,  Node: mysql-gis-conformance-and-compatibility,  Prev: optimizing-spatial-analysis,  Up: spatial-extensions

12.17.7 MySQL Conformance and Compatibility
-------------------------------------------

MySQL does not yet implement the following GIS features:

   * Additional Metadata Views

     OpenGIS specifications propose several additional metadata views.
     For example, a system view named `GEOMETRY_COLUMNS' contains a
     description of geometry columns, one row for each geometry column
     in the database.

   * The OpenGIS function `Length()' on `LineString' and
     `MultiLineString' currently should be called in MySQL as
     `GLength()'

     The problem is that there is an existing SQL function `Length()'
     that calculates the length of string values, and sometimes it is
     not possible to distinguish whether the function is called in a
     textual or spatial context. We need either to solve this somehow,
     or decide on another function name.


File: manual.info,  Node: precision-math,  Prev: spatial-extensions,  Up: functions

12.18 Precision Math
====================

* Menu:

* precision-math-numbers::       Types of Numeric Values
* precision-math-decimal-changes::  `DECIMAL' Data Type Changes
* precision-math-expressions::   Expression Handling
* precision-math-rounding::      Rounding Behavior
* precision-math-examples::      Precision Math Examples

MySQL 5.5 provides support for precision math: numeric value handling
that results in extremely accurate results and a high degree control
over invalid values. Precision math is based on these two features:

   * SQL modes that control how strict the server is about accepting or
     rejecting invalid data.

   * The MySQL library for fixed-point arithmetic.

These features have several implications for numeric operations and
provide a high degree of compliance with standard SQL:

   * *Precise calculations*: For exact-value numbers, calculations do
     not introduce floating-point errors. Instead, exact precision is
     used. For example, MySQL treats a number such as `.0001' as an
     exact value rather than as an approximation, and summing it 10,000
     times produces a result of exactly `1', not a value that is merely
     `close' to 1.

   * *Well-defined rounding behavior*: For exact-value numbers, the
     result of `ROUND()' depends on its argument, not on environmental
     factors such as how the underlying C library works.

   * *Platform independence*: Operations on exact numeric values are
     the same across different platforms such as Windows and Unix.

   * *Control over handling of invalid values*: Overflow and division
     by zero are detectable and can be treated as errors. For example,
     you can treat a value that is too large for a column as an error
     rather than having the value truncated to lie within the range of
     the column's data type. Similarly, you can treat division by zero
     as an error rather than as an operation that produces a result of
     `NULL'. The choice of which approach to take is determined by the
     setting of the server SQL mode.

The following discussion covers several aspects of how precision math
works, including possible incompatibilities with older applications. At
the end, some examples are given that demonstrate how MySQL 5.5 handles
numeric operations precisely. For information about controlling the SQL
mode, see *Note server-sql-mode::.


File: manual.info,  Node: precision-math-numbers,  Next: precision-math-decimal-changes,  Prev: precision-math,  Up: precision-math

12.18.1 Types of Numeric Values
-------------------------------

The scope of precision math for exact-value operations includes the
exact-value data types (*Note `DECIMAL': fixed-point-types.  and
integer types) and exact-value numeric literals.  Approximate-value
data types and numeric literals are handled as floating-point numbers.

Exact-value numeric literals have an integer part or fractional part,
or both. They may be signed. Examples: `1', `.2', `3.4', `-5', `-6.78',
`+9.10'.

Approximate-value numeric literals are represented in scientific
notation with a mantissa and exponent. Either or both parts may be
signed. Examples: `1.2E3', `1.2E-3', `-1.2E3', `-1.2E-3'.

Two numbers that look similar may be treated differently. For example,
`2.34' is an exact-value (fixed-point) number, whereas `2.34E0' is an
approximate-value (floating-point) number.

The *Note `DECIMAL': fixed-point-types. data type is a fixed-point type
and calculations are exact. In MySQL, the *Note `DECIMAL':
fixed-point-types. type has several synonyms: *Note `NUMERIC':
fixed-point-types, *Note `DEC': fixed-point-types, *Note `FIXED':
fixed-point-types. The integer types also are exact-value types.

The *Note `FLOAT': floating-point-types. and *Note `DOUBLE':
floating-point-types. data types are floating-point types and
calculations are approximate. In MySQL, types that are synonymous with
*Note `FLOAT': floating-point-types. or *Note `DOUBLE':
floating-point-types. are *Note `DOUBLE PRECISION':
floating-point-types. and *Note `REAL': floating-point-types.


File: manual.info,  Node: precision-math-decimal-changes,  Next: precision-math-expressions,  Prev: precision-math-numbers,  Up: precision-math

12.18.2 `DECIMAL' Data Type Changes
-----------------------------------

This section discusses the characteristics of the *Note `DECIMAL':
fixed-point-types. data type (and its synonyms) in MySQL 5.5, with
particular regard to the following topics:

   * Maximum number of digits

   * Storage format

   * Storage requirements

   * The nonstandard MySQL extension to the upper range of *Note
     `DECIMAL': fixed-point-types. columns

Possible incompatibilities with applications that are written for older
versions of MySQL (prior to 5.0.3) are noted throughout this section.

The declaration syntax for a *Note `DECIMAL': fixed-point-types. column
is `DECIMAL(M,D)'.  The ranges of values for the arguments in MySQL 5.5
are as follows:

   * M is the maximum number of digits (the precision). It has a range
     of 1 to 65. (Older versions of MySQL permitted a range of 1 to
     254.)

   * D is the number of digits to the right of the decimal point (the
     scale). It has a range of 0 to 30 and must be no larger than M.

The maximum value of 65 for M means that calculations on *Note
`DECIMAL': fixed-point-types. values are accurate up to 65 digits. This
limit of 65 digits of precision also applies to exact-value numeric
literals, so the maximum range of such literals differs from before.
(In older versions of MySQL, decimal values could have up to 254
digits. However, calculations were done using floating-point and thus
were approximate, not exact.)

Values for *Note `DECIMAL': fixed-point-types. columns in MySQL 5.5 are
stored using a binary format that packs nine decimal digits into 4
bytes. The storage requirements for the integer and fractional parts of
each value are determined separately. Each multiple of nine digits
requires 4 bytes, and any remaining digits left over require some
fraction of 4 bytes. The storage required for remaining digits is given
by the following table.

This table lists the number of bytes required for remaining/leftover
digits.

Leftover Digits    Number of Bytes
0                  0
1-2                1
3-4                2
5-6                3
7-9                4

For example, a `DECIMAL(18,9)' column has nine digits on either side of
the decimal point, so the integer part and the fractional part each
require 4 bytes. A `DECIMAL(20,6)' column has fourteen integer digits
and six fractional digits. The integer digits require four bytes for
nine of the digits and 3 bytes for the remaining five digits. The six
fractional digits require 3 bytes.

Unlike some older versions of MySQL, *Note `DECIMAL':
fixed-point-types. columns in MySQL 5.5 do not store a leading `+'
character or `-' character or leading `0' digits. If you insert
`+0003.1' into a `DECIMAL(5,1)' column, it is stored as `3.1'. For
negative numbers, a literal `-' character is not stored.  Applications
that rely on the older behavior must be modified to account for this
change.

*Note `DECIMAL': fixed-point-types. columns in MySQL 5.5 do not permit
values larger than the range implied by the column definition. For
example, a `DECIMAL(3,0)' column supports a range of `-999' to `999'. A
`DECIMAL(M,D)' column permits at most M - D digits to the left of the
decimal point. This is not compatible with applications relying on older
versions of MySQL that permitted storing an extra digit in lieu of a
`+' sign.

The SQL standard requires that the precision of `NUMERIC(M,D)' be
_exactly_ M digits. For `DECIMAL(M,D)', the standard requires a
precision of at least M digits but permits more. In MySQL,
`DECIMAL(M,D)' and `NUMERIC(M,D)' are the same, and both have a
precision of exactly M digits.

For more detailed information about porting applications that rely on
the old treatment of the *Note `DECIMAL': fixed-point-types.  data
type, see the `MySQL 5.0 Reference Manual'.


File: manual.info,  Node: precision-math-expressions,  Next: precision-math-rounding,  Prev: precision-math-decimal-changes,  Up: precision-math

12.18.3 Expression Handling
---------------------------

With precision math, exact-value numbers are used as given whenever
possible. For example, numbers in comparisons are used exactly as given
without a change in value. In strict SQL mode, for *Note `INSERT':
insert. into a column with an exact data type (*Note `DECIMAL':
fixed-point-types. or integer), a number is inserted with its exact
value if it is within the column range. When retrieved, the value
should be the same as what was inserted. (Without strict mode,
truncation for *Note `INSERT': insert. is permissible.)

Handling of a numeric expression depends on what kind of values the
expression contains:

   * If any approximate values are present, the expression is
     approximate and is evaluated using floating-point arithmetic.

   * If no approximate values are present, the expression contains only
     exact values. If any exact value contains a fractional part (a
     value following the decimal point), the expression is evaluated
     using *Note `DECIMAL': fixed-point-types. exact arithmetic and has
     a precision of 65 digits. The term `exact' is subject to the
     limits of what can be represented in binary. For example, `1.0/3.0'
     can be approximated in decimal notation as `.333...', but not
     written as an exact number, so `(1.0/3.0)*3.0' does not evaluate
     to exactly `1.0'.

   * Otherwise, the expression contains only integer values. The
     expression is exact and is evaluated using integer arithmetic and
     has a precision the same as *Note `BIGINT': integer-types. (64
     bits).

If a numeric expression contains any strings, they are converted to
double-precision floating-point values and the expression is
approximate.

Inserts into numeric columns are affected by the SQL mode, which is
controlled by the `sql_mode' system variable. (See *Note
server-sql-mode::.) The following discussion mentions strict mode
(selected by the `STRICT_ALL_TABLES' or `STRICT_TRANS_TABLES' mode
values) and `ERROR_FOR_DIVISION_BY_ZERO'.  To turn on all restrictions,
you can simply use `TRADITIONAL' mode, which includes both strict mode
values and `ERROR_FOR_DIVISION_BY_ZERO':

     mysql> SET sql_mode='TRADITIONAL';

If a number is inserted into an exact type column (*Note `DECIMAL':
fixed-point-types. or integer), it is inserted with its exact value if
it is within the column range.

If the value has too many digits in the fractional part, rounding
occurs and a warning is generated. Rounding is done as described in
*Note precision-math-rounding::.

If the value has too many digits in the integer part, it is too large
and is handled as follows:

   * If strict mode is not enabled, the value is truncated to the
     nearest legal value and a warning is generated.

   * If strict mode is enabled, an overflow error occurs.

Underflow is not detected, so underflow handling is undefined.

By default, division by zero produces a result of `NULL' and no
warning. With the `ERROR_FOR_DIVISION_BY_ZERO' SQL mode enabled, MySQL
handles division by zero differently:

   * If strict mode is not enabled, a warning occurs.

   * If strict mode is enabled, inserts and updates involving division
     by zero are prohibited, and an error occurs.

In other words, inserts and updates involving expressions that perform
division by zero can be treated as errors, but this requires
`ERROR_FOR_DIVISION_BY_ZERO' in addition to strict mode.

Suppose that we have this statement:

     INSERT INTO t SET i = 1/0;

This is what happens for combinations of strict and
`ERROR_FOR_DIVISION_BY_ZERO' modes.

This table shows what happens for combinations of strict and
`ERROR_FOR_DIVISION_BY_ZERO' modes.

`sql_mode' Value                     Result
`''' (Default)                       No warning, no error; `i' is set to
                                     `NULL'.
strict                               No warning, no error; `i' is set to
                                     `NULL'.
`ERROR_FOR_DIVISION_BY_ZERO'         Warning, no error; `i' is set to
                                     `NULL'.
strict,`ERROR_FOR_DIVISION_BY_ZERO'  Error condition; no row is inserted.

For inserts of strings into numeric columns, conversion from string to
number is handled as follows if the string has nonnumeric contents:

   * A string that does not begin with a number cannot be used as a
     number and produces an error in strict mode, or a warning
     otherwise. This includes the empty string.

   * A string that begins with a number can be converted, but the
     trailing nonnumeric portion is truncated. If the truncated portion
     contains anything other than spaces, this produces an error in
     strict mode, or a warning otherwise.


File: manual.info,  Node: precision-math-rounding,  Next: precision-math-examples,  Prev: precision-math-expressions,  Up: precision-math

12.18.4 Rounding Behavior
-------------------------

This section discusses precision math rounding for the `ROUND()'
function and for inserts into columns with exact-value types (*Note
`DECIMAL': fixed-point-types. and integer).

The `ROUND()' function rounds differently depending on whether its
argument is exact or approximate:

   * For exact-value numbers, `ROUND()' uses the `round half up' rule:
     A value with a fractional part of .5 or greater is rounded up to
     the next integer if positive or down to the next integer if
     negative. (In other words, it is rounded away from zero.) A value
     with a fractional part less than .5 is rounded down to the next
     integer if positive or up to the next integer if negative.

   * For approximate-value numbers, the result depends on the C
     library. On many systems, this means that `ROUND()' uses the `round
     to nearest even' rule: A value with any fractional part is rounded
     to the nearest even integer.

The following example shows how rounding differs for exact and
approximate values:

     mysql> SELECT ROUND(2.5), ROUND(25E-1);
     +------------+--------------+
     | ROUND(2.5) | ROUND(25E-1) |
     +------------+--------------+
     | 3          |            2 |
     +------------+--------------+

For inserts into a *Note `DECIMAL': fixed-point-types. or integer
column, the target is an exact data type, so rounding uses `round half
away from zero,' regardless of whether the value to be inserted is
exact or approximate:

     mysql> CREATE TABLE t (d DECIMAL(10,0));
     Query OK, 0 rows affected (0.00 sec)

     mysql> INSERT INTO t VALUES(2.5),(2.5E0);
     Query OK, 2 rows affected, 2 warnings (0.00 sec)
     Records: 2  Duplicates: 0  Warnings: 2

     mysql> SELECT d FROM t;
     +------+
     | d    |
     +------+
     | 3    |
     | 3    |
     +------+


File: manual.info,  Node: precision-math-examples,  Prev: precision-math-rounding,  Up: precision-math

12.18.5 Precision Math Examples
-------------------------------

This section provides some examples that show precision math query
results in MySQL 5.5. These examples demonstrate the principles
described in *Note precision-math-expressions::, and *Note
precision-math-rounding::.

*Example 1*. Numbers are used with their exact value as given when
possible:

     mysql> SELECT (.1 + .2) = .3;
     +----------------+
     | (.1 + .2) = .3 |
     +----------------+
     |              1 |
     +----------------+

For floating-point values, results are inexact:

     mysql> SELECT (.1E0 + .2E0) = .3E0;
     +----------------------+
     | (.1E0 + .2E0) = .3E0 |
     +----------------------+
     |                    0 |
     +----------------------+

Another way to see the difference in exact and approximate value
handling is to add a small number to a sum many times. Consider the
following stored procedure, which adds `.0001' to a variable 1,000
times.

     CREATE PROCEDURE p ()
     BEGIN
       DECLARE i INT DEFAULT 0;
       DECLARE d DECIMAL(10,4) DEFAULT 0;
       DECLARE f FLOAT DEFAULT 0;
       WHILE i < 10000 DO
         SET d = d + .0001;
         SET f = f + .0001E0;
         SET i = i + 1;
       END WHILE;
       SELECT d, f;
     END;

The sum for both `d' and `f' logically should be 1, but that is true
only for the decimal calculation. The floating-point calculation
introduces small errors:

     +--------+------------------+
     | d      | f                |
     +--------+------------------+
     | 1.0000 | 0.99999999999991 |
     +--------+------------------+

*Example 2*. Multiplication is performed with the scale required by
standard SQL. That is, for two numbers X1 and X2 that have scale S1 and
S2, the scale of the result is `S1 + S2':

     mysql> SELECT .01 * .01;
     +-----------+
     | .01 * .01 |
     +-----------+
     | 0.0001    |
     +-----------+

*Example 3*. Rounding behavior for exact-value numbers is well-defined:

Rounding behavior (for example, with the `ROUND()' function) is
independent of the implementation of the underlying C library, which
means that results are consistent from platform to platform.

   * Rounding for exact-value columns (*Note `DECIMAL':
     fixed-point-types. and integer) and exact-valued numbers uses the
     `round half away from zero' rule. Values with a fractional part of
     .5 or greater are rounded away from zero to the nearest integer, as
     shown here:

          mysql> SELECT ROUND(2.5), ROUND(-2.5);
          +------------+-------------+
          | ROUND(2.5) | ROUND(-2.5) |
          +------------+-------------+
          | 3          | -3          |
          +------------+-------------+

   * Rounding for floating-point values uses the C library, which on
     many systems uses the `round to nearest even' rule. Values with
     any fractional part on such systems are rounded to the nearest
     even integer:

          mysql> SELECT ROUND(2.5E0), ROUND(-2.5E0);
          +--------------+---------------+
          | ROUND(2.5E0) | ROUND(-2.5E0) |
          +--------------+---------------+
          |            2 |            -2 |
          +--------------+---------------+

*Example 4*. In strict mode, inserting a value that is out of range for
a column causes an error, rather than truncation to a legal value.

When MySQL is not running in strict mode, truncation to a legal value
occurs:

     mysql> SET sql_mode='';
     Query OK, 0 rows affected (0.00 sec)

     mysql> CREATE TABLE t (i TINYINT);
     Query OK, 0 rows affected (0.01 sec)

     mysql> INSERT INTO t SET i = 128;
     Query OK, 1 row affected, 1 warning (0.00 sec)

     mysql> SELECT i FROM t;
     +------+
     | i    |
     +------+
     |  127 |
     +------+
     1 row in set (0.00 sec)

However, an error occurs if strict mode is in effect:

     mysql> SET sql_mode='STRICT_ALL_TABLES';
     Query OK, 0 rows affected (0.00 sec)

     mysql> CREATE TABLE t (i TINYINT);
     Query OK, 0 rows affected (0.00 sec)

     mysql> INSERT INTO t SET i = 128;
     ERROR 1264 (22003): Out of range value adjusted for column 'i' at row 1

     mysql> SELECT i FROM t;
     Empty set (0.00 sec)

*Example 5*: In strict mode and with `ERROR_FOR_DIVISION_BY_ZERO' set,
division by zero causes an error, not a result of `NULL'.

In nonstrict mode, division by zero has a result of `NULL':

     mysql> SET sql_mode='';
     Query OK, 0 rows affected (0.01 sec)

     mysql> CREATE TABLE t (i TINYINT);
     Query OK, 0 rows affected (0.00 sec)

     mysql> INSERT INTO t SET i = 1 / 0;
     Query OK, 1 row affected (0.00 sec)

     mysql> SELECT i FROM t;
     +------+
     | i    |
     +------+
     | NULL |
     +------+
     1 row in set (0.03 sec)

However, division by zero is an error if the proper SQL modes are in
effect:

     mysql> SET sql_mode='STRICT_ALL_TABLES,ERROR_FOR_DIVISION_BY_ZERO';
     Query OK, 0 rows affected (0.00 sec)

     mysql> CREATE TABLE t (i TINYINT);
     Query OK, 0 rows affected (0.00 sec)

     mysql> INSERT INTO t SET i = 1 / 0;
     ERROR 1365 (22012): Division by 0

     mysql> SELECT i FROM t;
     Empty set (0.01 sec)

*Example 6*. Exact-value literals are evaluated as exact values.

Prior to MySQL 5.0.3, exact-value and approximate-value literals both
are evaluated as double-precision floating-point values:

     mysql> SELECT VERSION();
     +------------+
     | VERSION()  |
     +------------+
     | 4.1.18-log |
     +------------+
     1 row in set (0.01 sec)

     mysql> CREATE TABLE t SELECT 2.5 AS a, 25E-1 AS b;
     Query OK, 1 row affected (0.07 sec)
     Records: 1  Duplicates: 0  Warnings: 0

     mysql> DESCRIBE t;
     +-------+-------------+------+-----+---------+-------+
     | Field | Type        | Null | Key | Default | Extra |
     +-------+-------------+------+-----+---------+-------+
     | a     | double(3,1) |      |     | 0.0     |       |
     | b     | double      |      |     | 0       |       |
     +-------+-------------+------+-----+---------+-------+
     2 rows in set (0.04 sec)

As of MySQL 5.0.3, the approximate-value literal is evaluated using
floating point, but the exact-value literal is handled as *Note
`DECIMAL': fixed-point-types.:

     mysql> SELECT VERSION();
     +-----------------+
     | VERSION()       |
     +-----------------+
     | 5.1.6-alpha-log |
     +-----------------+
     1 row in set (0.11 sec)

     mysql> CREATE TABLE t SELECT 2.5 AS a, 25E-1 AS b;
     Query OK, 1 row affected (0.01 sec)
     Records: 1  Duplicates: 0  Warnings: 0

     mysql> DESCRIBE t;
     +-------+-----------------------+------+-----+---------+-------+
     | Field | Type                  | Null | Key | Default | Extra |
     +-------+-----------------------+------+-----+---------+-------+
     | a     | decimal(2,1) unsigned | NO   |     | 0.0     |       |
     | b     | double                | NO   |     | 0       |       |
     +-------+-----------------------+------+-----+---------+-------+
     2 rows in set (0.01 sec)

*Example 7*. If the argument to an aggregate function is an exact
numeric type, the result is also an exact numeric type, with a scale at
least that of the argument.

Consider these statements:

     mysql> CREATE TABLE t (i INT, d DECIMAL, f FLOAT);
     mysql> INSERT INTO t VALUES(1,1,1);
     mysql> CREATE TABLE y SELECT AVG(i), AVG(d), AVG(f) FROM t;

Before MySQL 5.0.3, the result is a double no matter the argument type:

     mysql> DESCRIBE y;
     +--------+--------------+------+-----+---------+-------+
     | Field  | Type         | Null | Key | Default | Extra |
     +--------+--------------+------+-----+---------+-------+
     | AVG(i) | double(17,4) | YES  |     | NULL    |       |
     | AVG(d) | double(17,4) | YES  |     | NULL    |       |
     | AVG(f) | double       | YES  |     | NULL    |       |
     +--------+--------------+------+-----+---------+-------+

As of MySQL 5.0.3, the result is a double only for the floating-point
argument. For exact type arguments, the result is also an exact type:

     mysql> DESCRIBE y;
     +--------+---------------+------+-----+---------+-------+
     | Field  | Type          | Null | Key | Default | Extra |
     +--------+---------------+------+-----+---------+-------+
     | AVG(i) | decimal(14,4) | YES  |     | NULL    |       |
     | AVG(d) | decimal(14,4) | YES  |     | NULL    |       |
     | AVG(f) | double        | YES  |     | NULL    |       |
     +--------+---------------+------+-----+---------+-------+

The result is a double only for the floating-point argument. For exact
type arguments, the result is also an exact type.


File: manual.info,  Node: sql-syntax,  Next: storage-engines,  Prev: functions,  Up: Top

13 SQL Statement Syntax
***********************

* Menu:

* sql-syntax-data-definition::   Data Definition Statements
* sql-syntax-data-manipulation::  Data Manipulation Statements
* sql-syntax-transactions::      MySQL Transactional and Locking Statements
* sql-syntax-replication::       Replication Statements
* sql-syntax-prepared-statements::  SQL Syntax for Prepared Statements
* sql-syntax-compound-statements::  MySQL Compound-Statement Syntax
* sql-syntax-server-administration::  Database Administration Statements
* sql-syntax-utility::           MySQL Utility Statements

This chapter describes the syntax for the SQL statements supported by
MySQL.


File: manual.info,  Node: sql-syntax-data-definition,  Next: sql-syntax-data-manipulation,  Prev: sql-syntax,  Up: sql-syntax

13.1 Data Definition Statements
===============================

* Menu:

* alter-database::               `ALTER DATABASE' Syntax
* alter-event::                  `ALTER EVENT' Syntax
* alter-logfile-group::          `ALTER LOGFILE GROUP' Syntax
* alter-function::               `ALTER FUNCTION' Syntax
* alter-procedure::              `ALTER PROCEDURE' Syntax
* alter-server::                 `ALTER SERVER' Syntax
* alter-table::                  `ALTER TABLE' Syntax
* alter-tablespace::             `ALTER TABLESPACE' Syntax
* alter-view::                   `ALTER VIEW' Syntax
* create-database::              `CREATE DATABASE' Syntax
* create-event::                 `CREATE EVENT' Syntax
* create-function::              `CREATE FUNCTION' Syntax
* create-index::                 `CREATE INDEX' Syntax
* create-logfile-group::         `CREATE LOGFILE GROUP' Syntax
* create-procedure::             `CREATE PROCEDURE' and `CREATE FUNCTION' Syntax
* create-server::                `CREATE SERVER' Syntax
* create-table::                 `CREATE TABLE' Syntax
* create-tablespace::            `CREATE TABLESPACE' Syntax
* create-trigger::               `CREATE TRIGGER' Syntax
* create-view::                  `CREATE VIEW' Syntax
* drop-database::                `DROP DATABASE' Syntax
* drop-event::                   `DROP EVENT' Syntax
* drop-function::                `DROP FUNCTION' Syntax
* drop-index::                   `DROP INDEX' Syntax
* drop-logfile-group::           `DROP LOGFILE GROUP' Syntax
* drop-procedure::               `DROP PROCEDURE' and `DROP FUNCTION' Syntax
* drop-server::                  `DROP SERVER' Syntax
* drop-table::                   `DROP TABLE' Syntax
* drop-tablespace::              `DROP TABLESPACE' Syntax
* drop-trigger::                 `DROP TRIGGER' Syntax
* drop-view::                    `DROP VIEW' Syntax
* rename-table::                 `RENAME TABLE' Syntax
* truncate-table::               `TRUNCATE TABLE' Syntax


File: manual.info,  Node: alter-database,  Next: alter-event,  Prev: sql-syntax-data-definition,  Up: sql-syntax-data-definition

13.1.1 `ALTER DATABASE' Syntax
------------------------------

     ALTER {DATABASE | SCHEMA} [DB_NAME]
         ALTER_SPECIFICATION ...
     ALTER {DATABASE | SCHEMA} DB_NAME
         UPGRADE DATA DIRECTORY NAME

     ALTER_SPECIFICATION:
         [DEFAULT] CHARACTER SET [=] CHARSET_NAME
       | [DEFAULT] COLLATE [=] COLLATION_NAME

*Note `ALTER DATABASE': alter-database. enables you to change the
overall characteristics of a database. These characteristics are stored
in the `db.opt' file in the database directory. To use *Note `ALTER
DATABASE': alter-database, you need the `ALTER' privilege on the
database.  *Note `ALTER SCHEMA': alter-database. is a synonym for *Note
`ALTER DATABASE': alter-database.

The database name can be omitted from the first syntax, in which case
the statement applies to the default database.

* National Language Characteristics *

The `CHARACTER SET' clause changes the default database character set.
The `COLLATE' clause changes the default database collation. *Note
charset::, discusses character set and collation names.

You can see what character sets and collations are available using,
respectively, the *Note `SHOW CHARACTER SET': show-character-set. and
*Note `SHOW COLLATION': show-collation.  statements. See *Note
show-character-set::, and *Note show-collation::, for more information.

If you change the default character set or collation for a database,
stored routines that use the database defaults must be dropped and
recreated so that they use the new defaults. (In a stored routine,
variables with character data types use the database defaults if the
character set or collation are not specified explicitly. See *Note
create-procedure::.)

* Upgrading from Versions Older than MySQL 5.1 *

The syntax that includes the `UPGRADE DATA DIRECTORY NAME' clause
updates the name of the directory associated with the database to use
the encoding implemented in MySQL 5.1 for mapping database names to
database directory names (see *Note identifier-mapping::). This clause
is for use under these conditions:

   * It is intended when upgrading MySQL to 5.1 or later from older
     versions.

   * It is intended to update a database directory name to the current
     encoding format if the name contains special characters that need
     encoding.

   * The statement is used by *Note `mysqlcheck': mysqlcheck. (as
     invoked by *Note `mysql_upgrade': mysql-upgrade.).

For example, if a database in MySQL 5.0 has the name `a-b-c', the name
contains instances of the `-' (dash) character. In MySQL 5.0, the
database directory is also named `a-b-c', which is not necessarily safe
for all file systems. In MySQL 5.1 and later, the same database name is
encoded as `a@002db@002dc' to produce a file system-neutral directory
name.

When a MySQL installation is upgraded to MySQL 5.1 or later from an
older version,the server displays a name such as `a-b-c' (which is in
the old format) as `#mysql50#a-b-c', and you must refer to the name
using the `#mysql50#' prefix. Use `UPGRADE DATA DIRECTORY NAME' in this
case to explicitly tell the server to re-encode the database directory
name to the current encoding format:

     ALTER DATABASE `#mysql50#a-b-c` UPGRADE DATA DIRECTORY NAME;

After executing this statement, you can refer to the database as
`a-b-c' without the special `#mysql50#' prefix.


File: manual.info,  Node: alter-event,  Next: alter-logfile-group,  Prev: alter-database,  Up: sql-syntax-data-definition

13.1.2 `ALTER EVENT' Syntax
---------------------------

     ALTER
         [DEFINER = { USER | CURRENT_USER }]
         EVENT EVENT_NAME
         [ON SCHEDULE SCHEDULE]
         [ON COMPLETION [NOT] PRESERVE]
         [RENAME TO NEW_EVENT_NAME]
         [ENABLE | DISABLE | DISABLE ON SLAVE]
         [COMMENT 'COMMENT']
         [DO EVENT_BODY]

The *Note `ALTER EVENT': alter-event. statement changes one or more of
the characteristics of an existing event without the need to drop and
recreate it. The syntax for each of the `DEFINER', `ON SCHEDULE', `ON
COMPLETION', `COMMENT', `ENABLE' / `DISABLE', and *Note `DO': do.
clauses is exactly the same as when used with *Note `CREATE EVENT':
create-event. (See *Note create-event::.)

Any user can alter an event defined on a database for which that user
has the `EVENT' privilege. When a user executes a successful *Note
`ALTER EVENT': alter-event. statement, that user becomes the definer
for the affected event.

*Note `ALTER EVENT': alter-event. works only with an existing event:

     mysql> ALTER EVENT no_such_event
          >     ON SCHEDULE
          >       EVERY '2:3' DAY_HOUR;
     `ERROR 1517 (HY000): Unknown event 'no_such_event''

In each of the following examples, assume that the event named
`myevent' is defined as shown here:

     CREATE EVENT myevent
         ON SCHEDULE
           EVERY 6 HOUR
         COMMENT 'A sample comment.'
         DO
           UPDATE myschema.mytable SET mycol = mycol + 1;

The following statement changes the schedule for `myevent' from once
every six hours starting immediately to once every twelve hours,
starting four hours from the time the statement is run:

     ALTER EVENT myevent
         ON SCHEDULE
           EVERY 12 HOUR
         STARTS CURRENT_TIMESTAMP + INTERVAL 4 HOUR;

It is possible to change multiple characteristics of an event in a
single statement. This example changes the SQL statement executed by
`myevent' to one that deletes all records from `mytable'; it also
changes the schedule for the event such that it executes once, one day
after this *Note `ALTER EVENT': alter-event. statement is run.

     ALTER EVENT myevent
         ON SCHEDULE
           AT CURRENT_TIMESTAMP + INTERVAL 1 DAY
         DO
           TRUNCATE TABLE myschema.mytable;

Specify the options in an *Note `ALTER EVENT': alter-event. statement
only for those characteristics that you want to change; omitted options
keep their existing values. This includes any default values for *Note
`CREATE EVENT': create-event. such as `ENABLE'.

To disable `myevent', use this *Note `ALTER EVENT': alter-event.
statement:

     ALTER EVENT myevent
         DISABLE;

The `ON SCHEDULE' clause may use expressions involving built-in MySQL
functions and user variables to obtain any of the TIMESTAMP or INTERVAL
values which it contains. You cannot use stored routines or
user-defined functions in such expressions, and you cannot use any
table references; however, you can use `SELECT FROM DUAL'. This is true
for both *Note `ALTER EVENT': alter-event. and *Note `CREATE EVENT':
create-event. statements. References to stored routines, user-defined
functions, and tables in such cases are specifically not permitted, and
fail with an error (see Bug #22830).

Although an *Note `ALTER EVENT': alter-event. statement that contains
another *Note `ALTER EVENT': alter-event.  statement in its *Note `DO':
do. clause appears to succeed, when the server attempts to execute the
resulting scheduled event, the execution fails with an error.

To rename an event, use the *Note `ALTER EVENT': alter-event.
statement's `RENAME TO' clause.  This statement renames the event
`myevent' to `yourevent':

     ALTER EVENT myevent
         RENAME TO yourevent;

You can also move an event to a different database using `ALTER EVENT
... RENAME TO ...' and `DB_NAME.EVENT_NAME' notation, as shown here:

     ALTER EVENT olddb.myevent
         RENAME TO newdb.myevent;

To execute the previous statement, the user executing it must have the
`EVENT' privilege on both the `olddb' and `newdb' databases.

*Note*:

There is no `RENAME EVENT' statement.

The value `DISABLE ON SLAVE' is used on a replication slave instead of
`ENABLED' or `DISABLED' to indicate an event that was created on the
master and replicated to the slave, but that is not executed on the
slave. Normally, `DISABLE ON SLAVE' is set automatically as required;
however, there are some circumstances under which you may want or need
to change it manually. See *Note replication-features-invoked::, for
more information.


File: manual.info,  Node: alter-logfile-group,  Next: alter-function,  Prev: alter-event,  Up: sql-syntax-data-definition

13.1.3 `ALTER LOGFILE GROUP' Syntax
-----------------------------------

     ALTER LOGFILE GROUP LOGFILE_GROUP
         ADD UNDOFILE 'FILE_NAME'
         [INITIAL_SIZE [=] SIZE]
         [WAIT]
         ENGINE [=] ENGINE_NAME

This statement adds an `UNDO' file named 'FILE_NAME' to an existing log
file group LOGFILE_GROUP. An *Note `ALTER LOGFILE GROUP':
alter-logfile-group. statement has one and only one `ADD UNDOFILE'
clause. No `DROP UNDOFILE' clause is currently supported.

*Note*:

All MySQL Cluster Disk Data objects share the same namespace.  This
means that _each Disk Data object_ must be uniquely named (and not
merely each Disk Data object of a given type). For example, you cannot
have a tablespace and an undo log file with the same name, or an undo
log file and a data file with the same name.

The optional `INITIAL_SIZE' parameter sets the `UNDO' file's initial
size in bytes; if not specified, the initial size default to `128M'
(128 megabytes). You may optionally follow SIZE with a one-letter
abbreviation for an order of magnitude, similar to those used in
`my.cnf'. Generally, this is one of the letters `M' (for megabytes) or
`G' (for gigabytes).

On 32-bit systems, the maximum supported value for `INITIAL_SIZE' is
`4G'. (Bug #29186)

The minimum permitted value for `INITIAL_SIZE' is `1M'. (Bug #29574)

*Note*:

`WAIT' is parsed but otherwise ignored. This keyword currently has no
effect, and is intended for future expansion.

The `ENGINE' parameter (required) determines the storage engine which
is used by this log file group, with ENGINE_NAME being the name of the
storage engine. Currently, the only accepted values for ENGINE_NAME are
`*Note `NDBCLUSTER': mysql-cluster.' and `*Note `NDB': mysql-cluster.'.
The two values are equivalent.

Here is an example, which assumes that the log file group `lg_3' has
already been created using *Note `CREATE LOGFILE GROUP':
create-logfile-group. (see *Note create-logfile-group::):

     ALTER LOGFILE GROUP lg_3
         ADD UNDOFILE 'undo_10.dat'
         INITIAL_SIZE=32M
         ENGINE=NDBCLUSTER;

When *Note `ALTER LOGFILE GROUP': alter-logfile-group. is used with
`ENGINE = NDBCLUSTER' (alternatively, `ENGINE = NDB'), an `UNDO' log
file is created on each MySQL Cluster data node. You can verify that
the `UNDO' files were created and obtain information about them by
querying the *Note `INFORMATION_SCHEMA.FILES': files-table. table. For
example:

     mysql> SELECT FILE_NAME, LOGFILE_GROUP_NUMBER, EXTRA
         -> FROM INFORMATION_SCHEMA.FILES
         -> WHERE LOGFILE_GROUP_NAME = 'lg_3';
     +-------------+----------------------+----------------+
     | FILE_NAME   | LOGFILE_GROUP_NUMBER | EXTRA          |
     +-------------+----------------------+----------------+
     | newdata.dat |                    0 | CLUSTER_NODE=3 |
     | newdata.dat |                    0 | CLUSTER_NODE=4 |
     | undo_10.dat |                   11 | CLUSTER_NODE=3 |
     | undo_10.dat |                   11 | CLUSTER_NODE=4 |
     +-------------+----------------------+----------------+
     4 rows in set (0.01 sec)

(See *Note files-table::.)

Memory used for `UNDO_BUFFER_SIZE' comes from the global pool whose
size is determined by the value of the `SharedGlobalMemory' data node
configuration parameter. This includes any default value implied for
this option by the setting of the `InitialLogFileGroup' data node
configuration parameter.

*Note `ALTER LOGFILE GROUP': alter-logfile-group. is useful only with
Disk Data storage for MySQL Cluster. For more information, see *Note
mysql-cluster-disk-data::.


File: manual.info,  Node: alter-function,  Next: alter-procedure,  Prev: alter-logfile-group,  Up: sql-syntax-data-definition

13.1.4 `ALTER FUNCTION' Syntax
------------------------------

     ALTER FUNCTION FUNC_NAME [CHARACTERISTIC ...]

     CHARACTERISTIC:
         COMMENT 'STRING'
       | LANGUAGE SQL
       | { CONTAINS SQL | NO SQL | READS SQL DATA | MODIFIES SQL DATA }
       | SQL SECURITY { DEFINER | INVOKER }

This statement can be used to change the characteristics of a stored
function. More than one change may be specified in an *Note `ALTER
FUNCTION': alter-function. statement. However, you cannot change the
parameters or body of a stored function using this statement; to make
such changes, you must drop and re-create the function using *Note
`DROP FUNCTION': drop-function. and *Note `CREATE FUNCTION':
create-function.

You must have the `ALTER ROUTINE' privilege for the function. (That
privilege is granted automatically to the function creator.) If binary
logging is enabled, the *Note `ALTER FUNCTION': alter-function.
statement might also require the `SUPER' privilege, as described in
*Note stored-programs-logging::.


File: manual.info,  Node: alter-procedure,  Next: alter-server,  Prev: alter-function,  Up: sql-syntax-data-definition

13.1.5 `ALTER PROCEDURE' Syntax
-------------------------------

     ALTER PROCEDURE PROC_NAME [CHARACTERISTIC ...]

     CHARACTERISTIC:
         COMMENT 'STRING'
       | LANGUAGE SQL
       | { CONTAINS SQL | NO SQL | READS SQL DATA | MODIFIES SQL DATA }
       | SQL SECURITY { DEFINER | INVOKER }

This statement can be used to change the characteristics of a stored
procedure. More than one change may be specified in an *Note `ALTER
PROCEDURE': alter-procedure. statement. However, you cannot change the
parameters or body of a stored procedure using this statement; to make
such changes, you must drop and re-create the procedure using *Note
`DROP PROCEDURE': drop-procedure. and *Note `CREATE PROCEDURE':
create-procedure.

You must have the `ALTER ROUTINE' privilege for the procedure. By
default, that privilege is granted automatically to the procedure
creator. This behavior can be changed by disabling the
`automatic_sp_privileges' system variable. See *Note
stored-routines-privileges::.


File: manual.info,  Node: alter-server,  Next: alter-table,  Prev: alter-procedure,  Up: sql-syntax-data-definition

13.1.6 `ALTER SERVER' Syntax
----------------------------

     ALTER SERVER  SERVER_NAME
         OPTIONS (OPTION [, OPTION] ...)

Alters the server information for `SERVER_NAME', adjusting any of the
options permitted in the *Note `CREATE SERVER': create-server.
statement. The corresponding fields in the `mysql.servers' table are
updated accordingly. This statement requires the `SUPER' privilege.

For example, to update the `USER' option:

     ALTER SERVER s OPTIONS (USER 'sally');

`ALTER SERVER' does not cause an automatic commit.

In MySQL 5.5, `ALTER SERVER' is not written to the binary log,
regardless of the logging format that is in use.


File: manual.info,  Node: alter-table,  Next: alter-tablespace,  Prev: alter-server,  Up: sql-syntax-data-definition

13.1.7 `ALTER TABLE' Syntax
---------------------------

* Menu:

* alter-table-partition-operations::  `ALTER TABLE' Partition Operations
* alter-table-online-operations::  `ALTER TABLE' Online Operations in MySQL Cluster
* alter-table-examples::         `ALTER TABLE' Examples

     ALTER [ONLINE | OFFLINE] [IGNORE] TABLE TBL_NAME
         [ALTER_SPECIFICATION [, ALTER_SPECIFICATION] ...]
         [PARTITION_OPTIONS]

     ALTER_SPECIFICATION:
         TABLE_OPTIONS
       | ADD [COLUMN] COL_NAME COLUMN_DEFINITION
             [FIRST | AFTER COL_NAME ]
       | ADD [COLUMN] (COL_NAME COLUMN_DEFINITION,...)
       | ADD {INDEX|KEY} [INDEX_NAME]
             [INDEX_TYPE] (INDEX_COL_NAME,...) [INDEX_OPTION] ...
       | ADD [CONSTRAINT [SYMBOL]] PRIMARY KEY
             [INDEX_TYPE] (INDEX_COL_NAME,...) [INDEX_OPTION] ...
       | ADD [CONSTRAINT [SYMBOL]]
             UNIQUE [INDEX|KEY] [INDEX_NAME]
             [INDEX_TYPE] (INDEX_COL_NAME,...) [INDEX_OPTION] ...
       | ADD FULLTEXT [INDEX|KEY] [INDEX_NAME]
             (INDEX_COL_NAME,...) [INDEX_OPTION] ...
       | ADD SPATIAL [INDEX|KEY] [INDEX_NAME]
             (INDEX_COL_NAME,...) [INDEX_OPTION] ...
       | ADD [CONSTRAINT [SYMBOL]]
             FOREIGN KEY [INDEX_NAME] (INDEX_COL_NAME,...)
             REFERENCE_DEFINITION
       | ALTER [COLUMN] COL_NAME {SET DEFAULT LITERAL | DROP DEFAULT}
       | CHANGE [COLUMN] OLD_COL_NAME NEW_COL_NAME COLUMN_DEFINITION
             [FIRST|AFTER COL_NAME]
       | MODIFY [COLUMN] COL_NAME COLUMN_DEFINITION
             [FIRST | AFTER COL_NAME]
       | DROP [COLUMN] COL_NAME
       | DROP PRIMARY KEY
       | DROP {INDEX|KEY} INDEX_NAME
       | DROP FOREIGN KEY FK_SYMBOL
       | DISABLE KEYS
       | ENABLE KEYS
       | RENAME [TO|AS] NEW_TBL_NAME
       | ORDER BY COL_NAME [, COL_NAME] ...
       | CONVERT TO CHARACTER SET CHARSET_NAME [COLLATE COLLATION_NAME]
       | [DEFAULT] CHARACTER SET [=] CHARSET_NAME [COLLATE [=] COLLATION_NAME]
       | DISCARD TABLESPACE
       | IMPORT TABLESPACE
       | FORCE
       | ADD PARTITION (PARTITION_DEFINITION)
       | DROP PARTITION PARTITION_NAMES
       | TRUNCATE PARTITION {PARTITION_NAMES | ALL}
       | COALESCE PARTITION NUMBER
       | REORGANIZE PARTITION [PARTITION_NAMES INTO (PARTITION_DEFINITIONS)]
       | ANALYZE PARTITION {PARTITION_NAMES | ALL}
       | CHECK PARTITION {PARTITION_NAMES | ALL}
       | OPTIMIZE PARTITION {PARTITION_NAMES | ALL}
       | REBUILD PARTITION {PARTITION_NAMES | ALL}
       | REPAIR PARTITION {PARTITION_NAMES | ALL}
       | PARTITION BY PARTITIONING_EXPRESSION
       | REMOVE PARTITIONING

     INDEX_COL_NAME:
         COL_NAME [(LENGTH)] [ASC | DESC]

     INDEX_TYPE:
         USING {BTREE | HASH}

     INDEX_OPTION:
         KEY_BLOCK_SIZE [=] VALUE
       | INDEX_TYPE
       | WITH PARSER PARSER_NAME
       | COMMENT 'STRING'

     TABLE_OPTIONS:
         TABLE_OPTION [[,] TABLE_OPTION] ...  (see *Note `CREATE TABLE': create-table. options)

     PARTITION_OPTIONS:
         (see *Note `CREATE TABLE': create-table. options)

*Note `ALTER TABLE': alter-table. changes the structure of a table. For
example, you can add or delete columns, create or destroy indexes,
change the type of existing columns, or rename columns or the table
itself. You can also change characteristics such as the storage engine
used for the table or the table comment.

Partitioning-related clauses for *Note `ALTER TABLE': alter-table. can
be used with partitioned tables for repartitioning, for adding,
dropping, merging, and splitting partitions, and for performing
partitioning maintenance. It is possible for an *Note `ALTER TABLE':
alter-table.  statement to contain a `PARTITION BY' or `REMOVE
PARTITIONING' clause in an addition to other alter specifications, but
the `PARTITION BY' or `REMOVE PARTITIONING' clause must be specified
last after any other specifications. The `ADD PARTITION', `DROP
PARTITION', `COALESCE PARTITION', `REORGANIZE PARTITION', `ANALYZE
PARTITION', `CHECK PARTITION', and `REPAIR PARTITION' options cannot be
combined with other alter specifications in a single `ALTER TABLE',
since the options just listed act on individual partitions. For more
information, see *Note alter-table-partition-operations::.

Following the table name, specify the alterations to be made. If none
are given, *Note `ALTER TABLE': alter-table. does nothing.

The syntax for many of the permissible alterations is similar to
clauses of the *Note `CREATE TABLE': create-table.  statement. See
*Note create-table::, for more information.

Some operations may result in warnings if attempted on a table for
which the storage engine does not support the operation. These warnings
can be displayed with *Note `SHOW WARNINGS': show-warnings. See *Note
show-warnings::.

For information on troubleshooting *Note `ALTER TABLE': alter-table,
see *Note alter-table-problems::.

* Storage, Performance, and Concurrency Considerations *

In most cases, *Note `ALTER TABLE': alter-table. makes a temporary copy
of the original table. MySQL waits for other operations that are
modifying the table, then proceeds. It incorporates the alteration into
the copy, deletes the original table, and renames the new one. While
*Note `ALTER TABLE': alter-table. is executing, the original table is
readable by other sessions (with the exception noted shortly). Updates
and writes to the table that begin after the *Note `ALTER TABLE':
alter-table. operation begins are stalled until the new table is ready,
then are automatically redirected to the new table without any failed
updates. The temporary table is created in the database directory of
the new table. This can differ from the database directory of the
original table for *Note `ALTER TABLE': alter-table. operations that
rename the table to a different database.

The exception referred to earlier is that *Note `ALTER TABLE':
alter-table. blocks reads (not just writes) at the point where it is
ready to install a new version of the table `.frm' file, discard the
old file, and clear outdated table structures from the table and table
definition caches. At this point, it must acquire an exclusive lock. To
do so, it waits for current readers to finish, and blocks new reads
(and writes).

For `MyISAM' tables, you can speed up index re-creation (the slowest
part of the alteration process) by setting the
`myisam_sort_buffer_size' system variable to a high value.

For some operations, an in-place *Note `ALTER TABLE': alter-table. is
possible that does not require a temporary table:

   * For `ALTER TABLE TBL_NAME RENAME TO NEW_TBL_NAME' without any
     other options, MySQL simply renames any files that correspond to
     the table TBL_NAME without making a copy. (You can also use the
     *Note `RENAME TABLE': rename-table. statement to rename tables.
     See *Note rename-table::.) Any privileges granted specifically for
     the renamed table are not migrated to the new name. They must be
     changed manually.

   * Alterations that modify only table metadata and not table data can
     be made immediately by altering the table's `.frm' file and not
     touching table contents. The following changes are fast
     alterations that can be made this way:

        * Renaming a column, except for the *Note `InnoDB':
          innodb-storage-engine. storage engine.

        * Changing the default value of a column (except for *Note
          `NDB': mysql-cluster. tables; see Limitations of *Note
          `NDBCLUSTER': mysql-cluster. online operations).

        * Changing the definition of an *Note `ENUM': enum. or *Note
          `SET': set. column by adding new enumeration or set members
          to the _end_ of the list of valid member values, as long as
          the storage size of the data type does not change. For
          example, adding a member to a *Note `SET': set. column that
          has 8 members changes the required storage per value from 1
          byte to 2 bytes; this will require a table copy.  Adding
          members in the middle of the list causes renumbering of
          existing members, which requires a table copy.

   * `ALTER TABLE' with `ADD PARTITION', `DROP PARTITION', `COALESCE
     PARTITION', `REBUILD PARTITION', or `REORGANIZE PARTITION' does
     not create any temporary tables (except when used with *Note
     `NDB': mysql-cluster.  tables); however, these operations can and
     do create temporary partition files.

     `ADD' or `DROP' operations for `RANGE' or `LIST' partitions are
     immediate operations or nearly so.  `ADD' or `COALESCE' operations
     for `HASH' or `KEY' partitions copy data between all partitions,
     unless `LINEAR HASH' or `LINEAR KEY' was used; this is effectively
     the same as creating a new table, although the `ADD' or `COALESCE'
     operation is performed partition by partition.  `REORGANIZE'
     operations copy only changed partitions and do not touch unchanged
     ones.

   * Renaming an index, except for *Note `InnoDB':
     innodb-storage-engine.

   * Adding or dropping an index, for *Note `InnoDB':
     innodb-storage-engine. and *Note `NDB': mysql-cluster.

You can force an `ALTER TABLE' operation that would otherwise not
require a table copy to use the temporary table method (as supported in
MySQL 5.0) by setting the `old_alter_table' system variable to `ON'.

As of MySQL 5.5.11, you can also use *Note `ALTER TABLE TBL_NAME
FORCE': alter-table. to perform a `null' alter operation that rebuilds
the table.  Previously the `FORCE' option was recognized but ignored.

For *Note `NDBCLUSTER': mysql-cluster. tables, operations that add and
drop indexes on variable-width columns occur online, without any table
copying and without blocking concurrent DML actions for most of their
duration. See *Note alter-table-online-operations::.

* Usage Notes *

   * To use *Note `ALTER TABLE': alter-table, you need `ALTER',
     `CREATE', and `INSERT' privileges for the table. Renaming a table
     requires `ALTER' and `DROP' on the old table, `ALTER', `CREATE',
     and `INSERT' on the new table.

   * `IGNORE' is a MySQL extension to standard SQL. It controls how
     *Note `ALTER TABLE': alter-table. works if there are duplicates on
     unique keys in the new table or if warnings occur when strict mode
     is enabled. If `IGNORE' is not specified, the copy is aborted and
     rolled back if duplicate-key errors occur.  If `IGNORE' is
     specified, only the first row is used of rows with duplicates on a
     unique key. The other conflicting rows are deleted. Incorrect
     values are truncated to the closest matching acceptable value.

   * Pending *Note `INSERT DELAYED': insert-delayed.  statements are
     lost if a table is write locked and *Note `ALTER TABLE':
     alter-table. is used to modify the table structure.

   * TABLE_OPTION signifies a table option of the kind that can be used
     in the *Note `CREATE TABLE': create-table. statement, such as
     `ENGINE', `AUTO_INCREMENT', `AVG_ROW_LENGTH', or `MAX_ROWS'. For a
     list of all table options and descriptions of each, see *Note
     create-table::.  However, *Note `ALTER TABLE': alter-table. ignores
     the `DATA DIRECTORY' and `INDEX DIRECTORY' table options.

     For example, to convert a table to be an `InnoDB' table, use this
     statement:

          ALTER TABLE t1 ENGINE = InnoDB;

     See *Note converting-tables-to-innodb:: for considerations when
     switching tables to the `InnoDB' storage engine.

     When you specify an `ENGINE' clause, *Note `ALTER TABLE':
     alter-table. rebuilds the table.  This is true even if the table
     already has the specified storage engine.

     The outcome of attempting to change a table's storage engine is
     affected by whether the desired storage engine is available and
     the setting of the `NO_ENGINE_SUBSTITUTION' SQL mode, as described
     in *Note server-sql-mode::.

     To prevent inadvertent loss of data, *Note `ALTER TABLE':
     alter-table. cannot be used to change the storage engine of a
     table to `MERGE' or `BLACKHOLE'.

     To change the value of the `AUTO_INCREMENT' counter to be used for
     new rows, do this:

          ALTER TABLE t2 AUTO_INCREMENT = VALUE;

     You cannot reset the counter to a value less than or equal to any
     that have already been used. For `MyISAM', if the value is less
     than or equal to the maximum value currently in the
     `AUTO_INCREMENT' column, the value is reset to the current maximum
     plus one. For `InnoDB', _if the value is less than the current
     maximum value in the column, no error occurs and the current
     sequence value is not changed._

   * You can issue multiple `ADD', `ALTER', `DROP', and `CHANGE'
     clauses in a single *Note `ALTER TABLE': alter-table. statement,
     separated by commas. This is a MySQL extension to standard SQL,
     which permits only one of each clause per *Note `ALTER TABLE':
     alter-table. statement. For example, to drop multiple columns in a
     single statement, do this:

          ALTER TABLE t2 DROP COLUMN c, DROP COLUMN d;

   * `CHANGE COL_NAME', `DROP COL_NAME', and `DROP INDEX' are MySQL
     extensions to standard SQL.

   * The word `COLUMN' is optional and can be omitted.

   * COLUMN_DEFINITION clauses use the same syntax for `ADD' and
     `CHANGE' as for *Note `CREATE TABLE': create-table. See *Note
     create-table::.

   * You can rename a column using a `CHANGE OLD_COL_NAME NEW_COL_NAME
     COLUMN_DEFINITION' clause.  To do so, specify the old and new
     column names and the definition that the column currently has. For
     example, to rename an *Note `INTEGER': integer-types. column from
     `a' to `b', you can do this:

          ALTER TABLE t1 CHANGE a b INTEGER;

     To change a column's type but not the name, `CHANGE' syntax still
     requires an old and new column name, even if they are the same.
     For example:

          ALTER TABLE t1 CHANGE b b BIGINT NOT NULL;

     You can also use `MODIFY' to change a column's type without
     renaming it:

          ALTER TABLE t1 MODIFY b BIGINT NOT NULL;

     `MODIFY' is an extension to *Note `ALTER TABLE': alter-table. for
     Oracle compatibility.

     When you use `CHANGE' or `MODIFY', COLUMN_DEFINITION must include
     the data type and all attributes that should apply to the new
     column, other than index attributes such as `PRIMARY KEY' or
     `UNIQUE'. Attributes present in the original definition but not
     specified for the new definition are not carried forward. Suppose
     that a column `col1' is defined as `INT UNSIGNED DEFAULT 1 COMMENT
     'my column'' and you modify the column as follows:

          ALTER TABLE t1 MODIFY col1 BIGINT;

     The resulting column will be defined as `BIGINT', but will not
     include the attributes `UNSIGNED DEFAULT 1 COMMENT 'my column''. To
     retain them, the statement should be:

          ALTER TABLE t1 MODIFY col1 BIGINT UNSIGNED DEFAULT 1 COMMENT 'my column';

   * When you change a data type using `CHANGE' or `MODIFY', MySQL
     tries to convert existing column values to the new type as well as
     possible.

     *Warning*:

     This conversion may result in alteration of data. For example, if
     you shorten a string column, values may be truncated. To prevent
     the operation from succeeding if conversions to the new data type
     would result in loss of data, enable strict SQL mode before using
     *Note `ALTER TABLE': alter-table. (see *Note server-sql-mode::).

   * To add a column at a specific position within a table row, use
     `FIRST' or `AFTER COL_NAME'. The default is to add the column
     last. You can also use `FIRST' and `AFTER' in `CHANGE' or `MODIFY'
     operations to reorder columns within a table.

   * `ALTER ... SET DEFAULT' or `ALTER ...  DROP DEFAULT' specify a new
     default value for a column or remove the old default value,
     respectively. If the old default is removed and the column can be
     `NULL', the new default is `NULL'. If the column cannot be `NULL',
     MySQL assigns a default value as described in *Note
     data-type-defaults::.

   * *Note `DROP INDEX': drop-index. removes an index.  This is a MySQL
     extension to standard SQL. See *Note drop-index::. If you are
     unsure of the index name, use `SHOW INDEX FROM TBL_NAME'.

   * If columns are dropped from a table, the columns are also removed
     from any index of which they are a part. If all columns that make
     up an index are dropped, the index is dropped as well. If you use
     `CHANGE' or `MODIFY' to shorten a column for which an index exists
     on the column, and the resulting column length is less than the
     index length, MySQL shortens the index automatically.

   * If a table contains only one column, the column cannot be dropped.
     If what you intend is to remove the table, use *Note `DROP TABLE':
     drop-table. instead.

   * `DROP PRIMARY KEY' drops the primary key. If there is no primary
     key, an error occurs. For information about the performance
     characteristics of primary keys, especially for `InnoDB' tables,
     see *Note optimizing-primary-keys::.

     If you add a `UNIQUE INDEX' or `PRIMARY KEY' to a table, MySQL
     stores it before any nonunique index to permit detection of
     duplicate keys as early as possible.

   * Some storage engines permit you to specify an index type when
     creating an index. The syntax for the INDEX_TYPE specifier is
     `USING TYPE_NAME'.  For details about `USING', see *Note
     create-index::. The preferred position is after the column list.
     Support for use of the option before the column list will be
     removed in a future MySQL release.

     INDEX_OPTION values specify additional options for an index.
     `USING' is one such option. For details about permissible
     INDEX_OPTION values, see *Note create-index::.

   * After an *Note `ALTER TABLE': alter-table. statement, it may be
     necessary to run *Note `ANALYZE TABLE': analyze-table. to update
     index cardinality information. See *Note show-index::.

   * `ORDER BY' enables you to create the new table with the rows in a
     specific order. Note that the table does not remain in this order
     after inserts and deletes. This option is useful primarily when
     you know that you are mostly to query the rows in a certain order
     most of the time. By using this option after major changes to the
     table, you might be able to get higher performance. In some cases,
     it might make sorting easier for MySQL if the table is in order by
     the column that you want to order it by later.

     `ORDER BY' syntax permits one or more column names to be specified
     for sorting, each of which optionally can be followed by `ASC' or
     `DESC' to indicate ascending or descending sort order,
     respectively. The default is ascending order. Only column names
     are permitted as sort criteria; arbitrary expressions are not
     permitted. This clause should be given last after any other
     clauses.

     `ORDER BY' does not make sense for `InnoDB' tables that contain a
     user-defined clustered index (`PRIMARY KEY' or `NOT NULL UNIQUE'
     index).  `InnoDB' always orders table rows according to such an
     index if one is present.

     *Note*:

     When used on a partitioned table, `ALTER TABLE ...  ORDER BY'
     orders rows within each partition only.

   * If you use *Note `ALTER TABLE': alter-table. on a `MyISAM' table,
     all nonunique indexes are created in a separate batch (as for
     *Note `REPAIR TABLE': repair-table.). This should make *Note
     `ALTER TABLE': alter-table. much faster when you have many indexes.

     This feature can be activated explicitly for a `MyISAM' table.
     `ALTER TABLE ...  DISABLE KEYS' tells MySQL to stop updating
     nonunique indexes. `ALTER TABLE ... ENABLE KEYS' then should be
     used to re-create missing indexes. MySQL does this with a special
     algorithm that is much faster than inserting keys one by one, so
     disabling keys before performing bulk insert operations should
     give a considerable speedup. Using `ALTER TABLE ... DISABLE KEYS'
     requires the `INDEX' privilege in addition to the privileges
     mentioned earlier.

     While the nonunique indexes are disabled, they are ignored for
     statements such as *Note `SELECT': select. and *Note `EXPLAIN':
     explain. that otherwise would use them.

   * If *Note `ALTER TABLE': alter-table. for an `InnoDB' table results
     in changes to column values (for example, because a column is
     truncated), `InnoDB''s `FOREIGN KEY' constraint checks do not
     notice possible violations caused by changing the values.

   * The `FOREIGN KEY' and `REFERENCES' clauses are supported by the
     `InnoDB' storage engine, which implements `ADD [CONSTRAINT
     [SYMBOL]] FOREIGN KEY [INDEX_NAME] (...)  REFERENCES ... (...)'.
     See *Note innodb-foreign-key-constraints::. For other storage
     engines, the clauses are parsed but ignored. The `CHECK' clause is
     parsed but ignored by all storage engines. See *Note
     create-table::. The reason for accepting but ignoring syntax
     clauses is for compatibility, to make it easier to port code from
     other SQL servers, and to run applications that create tables with
     references. See *Note differences-from-ansi::.

     For *Note `ALTER TABLE': alter-table, unlike *Note `CREATE TABLE':
     create-table, `ADD FOREIGN KEY' ignores INDEX_NAME if given and
     uses an automatically generated foreign key name. As a workaround,
     include the `CONSTRAINT' clause to specify the foreign key name:

          ADD CONSTRAINT NAME FOREIGN KEY (....) ...

     *Important*:

     The inline `REFERENCES' specifications where the references are
     defined as part of the column specification are silently ignored by
     `InnoDB'. InnoDB only accepts `REFERENCES' clauses defined as part
     of a separate `FOREIGN KEY' specification.

     *Note*:

     Partitioned `InnoDB' tables do not support foreign keys. See *Note
     partitioning-limitations-storage-engines::, for more information.

   * `InnoDB' supports the use of *Note `ALTER TABLE': alter-table. to
     drop foreign keys:

          ALTER TABLE TBL_NAME DROP FOREIGN KEY FK_SYMBOL;

     For more information, see *Note innodb-foreign-key-constraints::.

   * You cannot add a foreign key and drop a foreign key in separate
     clauses of a single *Note `ALTER TABLE': alter-table. statement.
     You must use separate statements.

   * For an `InnoDB' table that is created with its own tablespace in
     an `.ibd' file, that file can be discarded and imported. To
     discard the `.ibd' file, use this statement:

          ALTER TABLE TBL_NAME DISCARD TABLESPACE;

     This deletes the current `.ibd' file, so be sure that you have a
     backup first. Attempting to access the table while the tablespace
     file is discarded results in an error.

     To import the backup `.ibd' file back into the table, copy it into
     the database directory, and then issue this statement:

          ALTER TABLE TBL_NAME IMPORT TABLESPACE;

     The tablespace file must have been created on the server into
     which it is imported later.

     *Note*:

     The *Note `ALTER TABLE ... IMPORT TABLESPACE': alter-table.
     feature does not enforce foreign key constraints on imported data.

     See *Note innodb-multiple-tablespaces::.

   * To change the table default character set and all character
     columns (*Note `CHAR': char, *Note `VARCHAR': char, *Note `TEXT':
     blob.) to a new character set, use a statement like this:

          ALTER TABLE TBL_NAME CONVERT TO CHARACTER SET CHARSET_NAME;

     For a column that has a data type of *Note `VARCHAR': char. or one
     of the *Note `TEXT': blob. types, `CONVERT TO CHARACTER SET' will
     change the data type as necessary to ensure that the new column is
     long enough to store as many characters as the original column.
     For example, a *Note `TEXT': blob. column has two length bytes,
     which store the byte-length of values in the column, up to a
     maximum of 65,535. For a `latin1' *Note `TEXT': blob. column, each
     character requires a single byte, so the column can store up to
     65,535 characters. If the column is converted to `utf8', each
     character might require up to three bytes, for a maximum possible
     length of 3 x 65,535 = 196,605 bytes. That length will not fit in a
     *Note `TEXT': blob. column's length bytes, so MySQL will convert
     the data type to *Note `MEDIUMTEXT': blob, which is the smallest
     string type for which the length bytes can record a value of
     196,605. Similarly, a *Note `VARCHAR': char. column might be
     converted to *Note `MEDIUMTEXT': blob.

     To avoid data type changes of the type just described, do not use
     `CONVERT TO CHARACTER SET'. Instead, use `MODIFY' to change
     individual columns. For example:

          ALTER TABLE t MODIFY latin1_text_col TEXT CHARACTER SET utf8;
          ALTER TABLE t MODIFY latin1_varchar_col VARCHAR(M) CHARACTER SET utf8;

     If you specify `CONVERT TO CHARACTER SET binary', the *Note
     `CHAR': char, *Note `VARCHAR': char, and *Note `TEXT': blob.
     columns are converted to their corresponding binary string types
     (*Note `BINARY': binary-varbinary, *Note `VARBINARY':
     binary-varbinary, *Note `BLOB': blob.). This means that the
     columns no longer will have a character set and a subsequent
     `CONVERT TO' operation will not apply to them.

     If CHARSET_NAME is `DEFAULT', the database character set is used.

     *Warning*:

     The `CONVERT TO' operation converts column values between the
     character sets. This is _not_ what you want if you have a column
     in one character set (like `latin1') but the stored values
     actually use some other, incompatible character set (like `utf8').
     In this case, you have to do the following for each such column:

          ALTER TABLE t1 CHANGE c1 c1 BLOB;
          ALTER TABLE t1 CHANGE c1 c1 TEXT CHARACTER SET utf8;

     The reason this works is that there is no conversion when you
     convert to or from *Note `BLOB': blob.  columns.

     To change only the _default_ character set for a table, use this
     statement:

          ALTER TABLE TBL_NAME DEFAULT CHARACTER SET CHARSET_NAME;

     The word `DEFAULT' is optional. The default character set is the
     character set that is used if you do not specify the character set
     for columns that you add to a table later (for example, with
     `ALTER TABLE ... ADD column').

With the *Note `mysql_info()': mysql-info. C API function, you can find
out how many rows were copied by *Note `ALTER TABLE': alter-table, and
(when `IGNORE' is used) how many rows were deleted due to duplication
of unique key values. See *Note mysql-info::.


File: manual.info,  Node: alter-table-partition-operations,  Next: alter-table-online-operations,  Prev: alter-table,  Up: alter-table

13.1.7.1 `ALTER TABLE' Partition Operations
...........................................

Partitioning-related clauses for *Note `ALTER TABLE': alter-table. can
be used with partitioned tables for repartitioning, for adding,
dropping, merging, and splitting partitions, and for performing
partitioning maintenance.

   * Simply using a PARTITION_OPTIONS clause with *Note `ALTER TABLE':
     alter-table. on a partitioned table repartitions the table
     according to the partitioning scheme defined by the
     PARTITION_OPTIONS. This clause always begins with `PARTITION BY',
     and follows the same syntax and other rules as apply to the
     PARTITION_OPTIONS clause for *Note `CREATE TABLE': create-table.
     (see *Note create-table::, for more detailed information), and can
     also be used to partition an existing table that is not already
     partitioned. For example, consider a (nonpartitioned) table
     defined as shown here:

          CREATE TABLE t1 (
              id INT,
              year_col INT
          );

     This table can be partitioned by `HASH', using the `id' column as
     the partitioning key, into 8 partitions by means of this statement:

          ALTER TABLE t1
              PARTITION BY HASH(id)
              PARTITIONS 8;

     MySQL 5.5.31 and later supports an `ALGORITHM' option with
     `[SUB]PARTITION BY [LINEAR] KEY'.  `ALGORITHM=1' causes the server
     to use the same key-hashing functions as MySQL 5.1 when computing
     the placement of rows in partitions; `ALGORITHM=2' means that the
     server employs the key-hashing functions implemented and used by
     default for new `KEY' partitioned tables in MySQL 5.5 and later.
     (Partitioned tables created with the key-hashing functions
     employed in MySQL 5.5 and later cannot be used by a MySQL 5.1
     server.) Not specifying the option has the same effect as using
     `ALGORITHM=2'.  This option is intended for use chiefly when
     upgrading or downgrading `[LINEAR] KEY' partitioned tables between
     MySQL 5.1 and later MySQL versions, or for creating tables
     partitioned by `KEY' or `LINEAR KEY' on a MySQL 5.5 or later server
     which can be used on a MySQL 5.1 server.

     To upgrade a `KEY' partitioned table that was created in MySQL
     5.1, first execute *Note `SHOW CREATE TABLE': show-create-table.
     and note the the exact columns and number of partitions shown. Now
     execute an `ALTER TABLE' statement using exactly the same column
     list and number of partitions as in the `CREATE TABLE' statement,
     while adding `ALGORITHM=2' immediately following the `PARTITION
     BY' keywords. (You should also include the `LINEAR' keyword if it
     was used for the original table definition.) An example from a
     session in the *Note `mysql': mysql. client is shown here:

          mysql> SHOW CREATE TABLE p\G
          *************************** 1. row ***************************
                 Table: p
          Create Table: CREATE TABLE `p` (
            `id` int(11) NOT NULL AUTO_INCREMENT,
            `cd` datetime NOT NULL,
            PRIMARY KEY (`id`)
          ) ENGINE=InnoDB DEFAULT CHARSET=latin1
          /*!50100 _PARTITION BY LINEAR KEY (id)
          PARTITIONS 32_ */
          1 row in set (0.00 sec)

          mysql> ALTER TABLE p _PARTITION BY LINEAR KEY ALGORITHM=2 (id) PARTITIONS 32_;
          Query OK, 0 rows affected (5.34 sec)
          Records: 0  Duplicates: 0  Warnings: 0

          mysql> SHOW CREATE TABLE p\G
          *************************** 1. row ***************************
                 Table: p
          Create Table: CREATE TABLE `p` (
            `id` int(11) NOT NULL AUTO_INCREMENT,
            `cd` datetime NOT NULL,
            PRIMARY KEY (`id`)
          ) ENGINE=InnoDB DEFAULT CHARSET=latin1
          /*!50100 PARTITION BY LINEAR KEY (id)
          PARTITIONS 32 */
          1 row in set (0.00 sec)

     Downgrading a table created using the default key-hashing used in
     MySQL 5.5 and later to enable its use by a MySQL 5.1 server is
     similar, except in this case you should use `ALGORITHM=1' to force
     the table's partitions to be rebuilt using the MySQL 5.1
     key-hashing functions. It is recommended that you not do this
     except when necessary for compatibility with a MySQL 5.1 server, as
     the improved `KEY' hashing functions used by default in MySQL 5.5
     and later provide fixes for a number of issues found in the older
     implementation.

     *Note*:

     A table upgraded by means of `ALTER TABLE ...  PARTITION BY
     ALGORITHM=2 [LINEAR] KEY ...' can no longer be used by a MySQL 5.1
     server. (Such a table would need to be downgraded with `ALTER
     TABLE ...  PARTITION BY ALGORITHM=1 [LINEAR] KEY ...' before it
     could be used again by a MySQL 5.1 server.)

     The table that results from using an `ALTER TABLE ... PARTITION
     BY' statement must follow the same rules as one created using
     `CREATE TABLE ...  PARTITION BY'. This includes the rules governing
     the relationship between any unique keys (including any primary
     key) that the table might have, and the column or columns used in
     the partitioning expression, as discussed in *Note
     partitioning-limitations-partitioning-keys-unique-keys::.  The
     `CREATE TABLE ... PARTITION BY' rules for specifying the number of
     partitions also apply to `ALTER TABLE ... PARTITION BY'.

     The PARTITION_DEFINITION clause for `ALTER TABLE ADD PARTITION'
     supports the same options as the clause of the same name for the
     *Note `CREATE TABLE': create-table. statement. (See *Note
     create-table::, for the syntax and description.) Suppose that you
     have the partitioned table created as shown here:

          CREATE TABLE t1 (
              id INT,
              year_col INT
          )
          PARTITION BY RANGE (year_col) (
              PARTITION p0 VALUES LESS THAN (1991),
              PARTITION p1 VALUES LESS THAN (1995),
              PARTITION p2 VALUES LESS THAN (1999)
          );

     You can add a new partition `p3' to this table for storing values
     less than `2002' as follows:

          ALTER TABLE t1 ADD PARTITION (PARTITION p3 VALUES LESS THAN (2002));

     `DROP PARTITION' can be used to drop one or more `RANGE' or `LIST'
     partitions. This statement cannot be used with `HASH' or `KEY'
     partitions; instead, use `COALESCE PARTITION' (see below). Any
     data that was stored in the dropped partitions named in the
     PARTITION_NAMES list is discarded. For example, given the table
     `t1' defined previously, you can drop the partitions named `p0' and
     `p1' as shown here:

          ALTER TABLE t1 DROP PARTITION p0, p1;

     *Note*:

     `DROP PARTITION' does not work with tables that use the *Note
     `NDBCLUSTER': mysql-cluster. storage engine.  See *Note
     partitioning-management-range-list::, and *Note
     mysql-cluster-limitations::.

     `ADD PARTITION' and `DROP PARTITION' do not currently support `IF
     [NOT] EXISTS'.

     Renames of partitioned table are supported. You can rename
     individual partitions indirectly using `ALTER TABLE ... REORGANIZE
     PARTITION'; however, this operation makes a copy of the
     partition's data..

     Beginning with MySQL 5.5.0, it is possible to delete rows from
     selected partitions using the `TRUNCATE PARTITION' option. This
     option takes a comma-separated list of one or more partition
     names. For example, consider the table `t1' as defined here:

          CREATE TABLE t1 (
              id INT,
              year_col INT
          )
          PARTITION BY RANGE (year_col) (
              PARTITION p0 VALUES LESS THAN (1991),
              PARTITION p1 VALUES LESS THAN (1995),
              PARTITION p2 VALUES LESS THAN (1999),
              PARTITION p3 VALUES LESS THAN (2003),
              PARTITION p4 VALUES LESS THAN (2007)
          );

     To delete all rows from partition `p0', you can use the following
     statement:

          ALTER TABLE t1 TRUNCATE PARTITION p0;

     The statement just shown has the same effect as the following
     *Note `DELETE': delete. statement:

          DELETE FROM t1 WHERE year_col < 1991;

     When truncating multiple partitions, the partitions do not have to
     be contiguous: This can greatly simplify delete operations on
     partitioned tables that would otherwise require very complex
     `WHERE' conditions if done with *Note `DELETE': delete. statements.
     For example, this statement deletes all rows from partitions `p1'
     and `p3':

          ALTER TABLE t1 TRUNCATE PARTITION p1, p3;

     An equivalent *Note `DELETE': delete.  statement is shown here:

          DELETE FROM t1 WHERE
              (year_col >= 1991 AND year_col < 1995)
              OR
              (year_col >= 2003 AND year_col < 2007);

     You can also use the `ALL' keyword in place of the list of
     partition names; in this case, the statement acts on all
     partitions in the table.

     `TRUNCATE PARTITION' merely deletes rows; it does not alter the
     definition of the table itself, or of any of its partitions.

     *Note*:

     `TRUNCATE PARTITION' does not work with subpartitions.

     You can verify that the rows were dropped by checking the
     `INFORMATION_SCHEMA.PARTITIONS' table, using a query such as this
     one:

          SELECT PARTITION_NAME, TABLE_ROWS
              FROM INFORMATION_SCHEMA.PARTITIONS
              WHERE TABLE_NAME = 't1';

     `TRUNCATE PARTITION' is supported only for partitioned tables that
     use the *Note `MyISAM': myisam-storage-engine, *Note `InnoDB':
     innodb-storage-engine, or *Note `MEMORY': memory-storage-engine.
     storage engine. It also works on *Note `BLACKHOLE':
     blackhole-storage-engine. tables (but has no effect). It is not
     supported for *Note `ARCHIVE': archive-storage-engine. tables.

     `COALESCE PARTITION' can be used with a table that is partitioned
     by `HASH' or `KEY' to reduce the number of partitions by NUMBER.
     Suppose that you have created table `t2' using the following
     definition:

          CREATE TABLE t2 (
              name VARCHAR (30),
              started DATE
          )
          PARTITION BY HASH( YEAR(started) )
          PARTITIONS 6;

     You can reduce the number of partitions used by `t2' from 6 to 4
     using the following statement:

          ALTER TABLE t2 COALESCE PARTITION 2;

     The data contained in the last NUMBER partitions will be merged
     into the remaining partitions. In this case, partitions 4 and 5
     will be merged into the first 4 partitions (the partitions
     numbered 0, 1, 2, and 3).

     To change some but not all the partitions used by a partitioned
     table, you can use `REORGANIZE PARTITION'. This statement can be
     used in several ways:

        * To merge a set of partitions into a single partition.  This
          can be done by naming several partitions in the
          PARTITION_NAMES list and supplying a single definition for
          PARTITION_DEFINITION.

        * To split an existing partition into several partitions.  You
          can accomplish this by naming a single partition for
          PARTITION_NAMES and providing multiple PARTITION_DEFINITIONS.

        * To change the ranges for a subset of partitions defined using
          `VALUES LESS THAN' or the value lists for a subset of
          partitions defined using `VALUES IN'.

        * This statement may also be used without the `PARTITION_NAMES
          INTO (PARTITION_DEFINITIONS)' option on tables that are
          automatically partitioned using `HASH' partitioning to force
          redistribution of data. (Currently, only *Note `NDBCLUSTER':
          mysql-cluster. tables are automatically partitioned in this
          way.) This is useful in MySQL Cluster where, after you have
          added new MySQL Cluster data nodes online to an existing
          MySQL Cluster, you wish to redistribute existing MySQL
          Cluster table data to the new data nodes. In such cases, you
          should invoke the statement with the `ONLINE' option; in
          other words, as shown here:

               ALTER ONLINE TABLE TABLE REORGANIZE PARTITION;

          You cannot perform other DDL concurrently with online table
          reorganization--that is, no other DDL statements can be
          issued while an `ALTER ONLINE TABLE ... REORGANIZE PARTITION'
          statement is executing. For more information about adding
          MySQL Cluster data nodes online, see *Note
          mysql-cluster-online-add-node::.

          `ALTER ONLINE TABLE ... REORGANIZE PARTITION' does not work
          with tables which were created using the `MAX_ROWS' option,
          because it uses the constant `MAX_ROWS' value specified in
          the original *Note `CREATE TABLE': create-table. statement to
          determine the number of partitions required, so no new
          partitions are created. Beginning with MySQL Cluster NDB
          7.2.6, you can use `ALTER ONLINE TABLE ...  MAX_ROWS=ROWS' to
          increase the maxmimum number of rows for the table; after
          this, `ALTER ONLINE TABLE ... REORGANIZE PARTITION' can use
          this new, larger value to increase the number of partitions.
          The value of ROWS must be greater than the value specified
          for `MAX_ROWS' in the original `CREATE TABLE' statement for
          this to work.

          Attempting to use `REORGANIZE PARTITION' without the
          `PARTITION_NAMES INTO (PARTITION_DEFINITIONS)' option on
          explicitly partitioned tables results in the error
          `REORGANIZE PARTITION without parameters can only be used on
          auto-partitioned tables using HASH partitioning'.

     *Note*:

     For partitions that have not been explicitly named, MySQL
     automatically provides the default names `p0', `p1', `p2', and so
     on. The same is true with regard to subpartitions.

     For more detailed information about and examples of `ALTER TABLE
     ... REORGANIZE PARTITION' statements, see *Note
     partitioning-management-range-list::.

   * Several additional options provide partition maintenance and
     repair functionality analogous to that implemented for
     nonpartitioned tables by statements such as *Note `CHECK TABLE':
     check-table. and *Note `REPAIR TABLE': repair-table. (which are
     also supported for partitioned tables; see *Note
     table-maintenance-sql:: for more information). These include
     `ANALYZE PARTITION', `CHECK PARTITION', `OPTIMIZE PARTITION',
     `REBUILD PARTITION', and `REPAIR PARTITION'. Each of these options
     takes a PARTITION_NAMES clause consisting of one or more names of
     partitions, separated by commas. The partitions must already exist
     in the table to be altered.  You can also use the `ALL' keyword in
     place of PARTITION_NAMES, in which case the statement acts on all
     partitions in the table. For more information and examples, see
     *Note partitioning-maintenance::.

     Prior to MySQL 5.5.30, it was not safe to execute multiple
     concurrent `REBUILD TABLE' operations on partitioned tables,
     whether on the same or different tables.  (Bug #14589559, Bug
     #66645)

     Some MySQL storage engines, such as *Note `InnoDB':
     innodb-storage-engine, do not support per-partition optimization.
     For a partitioned table using such a storage engine, `ALTER TABLE
     ... OPTIMIZE PARTITION' rebuilds the entire table. This is a known
     issue. Beginning with MySQL 5.5.30, running this statement on such
     a table causes the entire table to rebuilt and analyzed, and an
     appropriate warning to be issued. (Bug #11751825, Bug #42822)

     To work around this problem, use the statements `ALTER TABLE ...
     REBUILD PARTITION' and `ALTER TABLE ... ANALYZE PARTITION' instead.

     The `ANALYZE PARTITION', `CHECK PARTITION', `OPTIMIZE PARTITION',
     and `REPAIR PARTITION' options are not permitted for tables which
     are not partitioned.

   * `REMOVE PARTITIONING' enables you to remove a table's partitioning
     without otherwise affecting the table or its data. This option can
     be combined with other *Note `ALTER TABLE': alter-table. options
     such as those used to add, drop, or rename drop columns or indexes.

   * Using the `ENGINE' option with *Note `ALTER TABLE': alter-table.
     changes the storage engine used by the table without affecting the
     partitioning.

It is possible for an *Note `ALTER TABLE': alter-table.  statement to
contain a `PARTITION BY' or `REMOVE PARTITIONING' clause in an addition
to other alter specifications, but the `PARTITION BY' or `REMOVE
PARTITIONING' clause must be specified last after any other
specifications.

The `ADD PARTITION', `DROP PARTITION', `COALESCE PARTITION',
`REORGANIZE PARTITION', `ANALYZE PARTITION', `CHECK PARTITION', and
`REPAIR PARTITION' options cannot be combined with other alter
specifications in a single `ALTER TABLE', since the options just listed
act on individual partitions. For more information, see *Note
alter-table-partition-operations::.

Only a single instance of any one of the following options can be used
in a given *Note `ALTER TABLE': alter-table.  statement: `PARTITION
BY', `ADD PARTITION', `DROP PARTITION', `TRUNCATE PARTITION',
`REORGANIZE PARTITION', or `COALESCE PARTITION', `ANALYZE PARTITION',
`CHECK PARTITION', `OPTIMIZE PARTITION', `REBUILD PARTITION', `REMOVE
PARTITIONING'.

For example, the following two statements are invalid:

     ALTER TABLE t1 ANALYZE PARTITION p1, ANALYZE PARTITION p2;

     ALTER TABLE t1 ANALYZE PARTITION p1, CHECK PARTITION p2;

In the first case, you can analyze partitions `p1' and `p2' of table
`t1' concurrently using a single statement with a single `ANALYZE
PARTITION' option that lists both of the partitions to be analyzed,
like this:

     ALTER TABLE t1 ANALYZE PARTITION p1, p2;

In the second case, it is not possible to perform `ANALYZE' and `CHECK'
operations on different partitions of the same table concurrently.
Instead, you must issue two separate statements, like this:

     ALTER TABLE t1 ANALYZE PARTITION p1;
     ALTER TABLE t1 CHECK PARTITION p2;


File: manual.info,  Node: alter-table-online-operations,  Next: alter-table-examples,  Prev: alter-table-partition-operations,  Up: alter-table

13.1.7.2 `ALTER TABLE' Online Operations in MySQL Cluster
.........................................................

Operations that add and drop indexes on variable-width columns of *Note
`NDBCLUSTER': mysql-cluster. tables occur online.  Online operations
are noncopying; that is, they do not require that indexes be
re-created. They do not lock the table being altered from access by
other API nodes in a MySQL Cluster (but see `Limitations' later in this
section).  Such operations do not require single user mode for *Note
`NDBCLUSTER': mysql-cluster. table alterations made in a cluster with
multiple API nodes; transactions can continue uninterrupted during
online DDL operations.

The `ONLINE' keyword can be used to perform online `ADD COLUMN', `ADD
INDEX' (including `CREATE INDEX' statements), and `DROP INDEX'
operations on *Note `NDBCLUSTER': mysql-cluster. tables. Online renaming
of *Note `NDBCLUSTER': mysql-cluster. tables is also supported.

The `ONLINE' and `OFFLINE' keywords are supported only in MySQL
Cluster. For standard MySQL Server 5.5 releases:

   * The server determines automatically whether an `ADD INDEX' or
     `DROP INDEX' operation can be (and is) performed online or
     offline; if the column is of a variable-width data type, the
     operation is performed online. It is not possible to override the
     server behavior in this regard.

   * Attempting to use the `ONLINE' or `OFFLINE' keyword in an *Note
     `ALTER TABLE': alter-table, *Note `CREATE INDEX': create-index, or
     *Note `DROP INDEX': drop-index. statement results in an error.

Currently you cannot add disk-based columns to *Note `NDBCLUSTER':
mysql-cluster. tables online. This means that, if you wish to add an
in-memory column to an *Note `NDBCLUSTER': mysql-cluster. table that
uses a table-level `STORAGE DISK' option, you must declare the new
column as using memory-based storage explicitly.  For example--assuming
that you have already created tablespace `ts1'--suppose that you create
table `t1' as follows:

     mysql> CREATE TABLE t1 (
          >     c1 INT NOT NULL PRIMARY KEY,
          >     c2 VARCHAR(30)
          >     )
          >     TABLESPACE ts1 STORAGE DISK
          >     ENGINE NDBCLUSTER;
     Query OK, 0 rows affected (1.73 sec)
     Records: 0  Duplicates: 0  Warnings: 0

You can add a new in-memory column to this table online as shown here:

     mysql> ALTER ONLINE TABLE t1 ADD COLUMN c3 INT COLUMN_FORMAT DYNAMIC STORAGE MEMORY;
     Query OK, 0 rows affected (1.25 sec)
     Records: 0  Duplicates: 0  Warnings: 0

This statement fails if the `STORAGE MEMORY' option is omitted:

     mysql> ALTER ONLINE TABLE t1 ADD COLUMN c3 INT COLUMN_FORMAT DYNAMIC;
     `ERROR 1235 (42000): This version of MySQL doesn't yet support
     'ALTER ONLINE TABLE t1 ADD COLUMN c3 INT COLUMN_FORMAT DYNAMIC''

If you omit the `COLUMN_FORMAT DYNAMIC' option, the dynamic column
format is employed automatically, but a warning is issued, as shown
here:

     mysql> ALTER ONLINE TABLE t1 ADD COLUMN c3 INT STORAGE MEMORY;
     Query OK, 0 rows affected, 1 warning (1.17 sec)
     Records: 0  Duplicates: 0  Warnings: 0

     mysql> SHOW WARNINGS;
     +---------+------+---------------------------------------------------------------+
     | Level   | Code | Message                                                       |
     +---------+------+---------------------------------------------------------------+
     | Warning | 1478 | Converted FIXED field to DYNAMIC to enable on-line ADD COLUMN |
     +---------+------+---------------------------------------------------------------+
     1 row in set (0.00 sec)

     mysql> SHOW CREATE TABLE t1\G
     *************************** 1. row ***************************
            Table: t1
     Create Table: CREATE TABLE `t1` (
       `c1` int(11) NOT NULL,
       `c2` varchar(30) DEFAULT NULL,
       `c3` int(11) /*!50120 STORAGE MEMORY */ /*!50120 COLUMN_FORMAT DYNAMIC */ DEFAULT NULL,
       `t4` int(11) /*!50120 STORAGE MEMORY */ DEFAULT NULL,
       PRIMARY KEY (`c1`)
     ) /*!50100 TABLESPACE ts_1 STORAGE DISK */ ENGINE=ndbcluster DEFAULT CHARSET=latin1
     1 row in set (0.03 sec)

*Note*:

The `STORAGE' and `COLUMN_FORMAT' keywords are supported only in MySQL
Cluster; in any other version of MySQL, attempting to use either of
these keywords in a *Note `CREATE TABLE': create-table. or *Note `ALTER
TABLE': alter-table.  statement results in an error.

It is also possible to use the statement `ALTER ONLINE TABLE ...
REORGANIZE PARTITION' with no `PARTITION_NAMES INTO
(PARTITION_DEFINITIONS)' option on *Note `NDBCLUSTER': mysql-cluster.
tables. This can be used to redistribute MySQL Cluster data among new
data nodes that have been added to the cluster online. For more
information about this statement, see *Note
alter-table-partition-operations:: For more information about adding
data nodes online to a MySQL Cluster, see *Note
mysql-cluster-online-add-node::.

* Limitations of *Note `NDBCLUSTER': mysql-cluster. online operations *

Online `DROP COLUMN' operations are not supported.

Online *Note `ALTER TABLE': alter-table, *Note `CREATE INDEX':
create-index, or *Note `DROP INDEX': drop-index. statements that add
columns or add or drop indexes are subject to the following limitations:

   * A given online *Note `ALTER TABLE': alter-table.  can use only one
     of `ADD COLUMN', `ADD INDEX', or `DROP INDEX'. One or more columns
     can be added online in a single statement; only one index may be
     created or dropped online in a single statement.

   * An `ALTER TABLE' statement that performs a rename while using the
     `ONLINE' or `OFFLINE' keyword cannot perform any other operations,
     including but not limited to `ADD COLUMN', `ADD INDEX', or `DROP
     INDEX'. Beginning with MySQL Cluster NDB 7.2.11, such statements
     are specifically disallowed, and fail with ER_NOT_SUPPORTED_YET.
     (Bug #16021021)

   * The table being altered is not locked with respect to API nodes
     other than the one on which an online *Note `ALTER TABLE':
     alter-table. `ADD COLUMN', `ADD INDEX', or `DROP INDEX' operation
     (or *Note `CREATE INDEX': create-index. or *Note `DROP INDEX':
     drop-index. statement) is run.  However, the table is locked
     against any other operations originating on the _same_ API node
     while the online operation is being executed.

   * The table to be altered must have an explicit primary key; the
     hidden primary key created by the *Note `NDBCLUSTER':
     mysql-cluster. storage engine is not sufficient for this purpose.

   * The storage engine used by the table cannot be changed online.

   * When used with MySQL Cluster Disk Data tables, it is not possible
     to change the storage type (`DISK' or `MEMORY') of a column
     online. This means, that when you add or drop an index in such a
     way that the operation would be performed online, and you want the
     storage type of the column or columns to be changed, you must use
     the `OFFLINE' keyword in the statement that adds or drops the
     index.

Columns to be added online cannot use the *Note `BLOB': blob. or *Note
`TEXT': blob. type, and must meet the following criteria:

   * The columns must be dynamic; that is, it must be possible to
     create them using `COLUMN_FORMAT DYNAMIC'.  If you omit the
     `COLUMN_FORMAT DYNAMIC' option, the dynamic column format is
     employed automatically.

   * The columns must permit `NULL' values and not have any explicit
     default value other than `NULL'. Columns added online are
     automatically created as `DEFAULT NULL', as can be seen here:

          mysql> CREATE TABLE t1 (
               >     c1 INT NOT NULL AUTO_INCREMENT PRIMARY KEY
               >     ) ENGINE=NDBCLUSTER;
          Query OK, 0 rows affected (1.44 sec)

          mysql> ALTER ONLINE TABLE t1
               >     ADD COLUMN c2 INT,
               >     ADD COLUMN c3 INT;
          Query OK, 0 rows affected, 2 warnings (0.93 sec)

          mysql> SHOW CREATE TABLE t1\G
          *************************** 1. row ***************************
                 Table: t1
          Create Table: CREATE TABLE `t1` (
            `c1` int(11) NOT NULL AUTO_INCREMENT,
            `c2` int(11) DEFAULT NULL,
            `c3` int(11) DEFAULT NULL,
            PRIMARY KEY (`c1`)
          ) ENGINE=ndbcluster DEFAULT CHARSET=latin1
          1 row in set (0.00 sec)

   * The columns must be added following any existing columns. If you
     attempt to add a column online before any existing columns or
     using the `FIRST' keyword, the statement fails with an error.

   * Existing table columns cannot be reordered online.

The preceding limitations do not apply to operations that merely rename
tables or columns.

For online *Note `ALTER TABLE': alter-table. operations on *Note
`NDBCLUSTER': mysql-cluster. tables, fixed-format columns are converted
to dynamic when they are added online, or when indexes are created or
dropped online, as shown here:

     mysql> CREATE TABLE t1 (
          >     c1 INT NOT NULL AUTO_INCREMENT PRIMARY KEY
          >     ) ENGINE=NDBCLUSTER;
     Query OK, 0 rows affected (1.44 sec)

     mysql> ALTER ONLINE TABLE t1 ADD COLUMN c2 INT, ADD COLUMN c3 INT;
     Query OK, 0 rows affected, 2 warnings (0.93 sec)
     Records: 0  Duplicates: 0  Warnings: 0

     mysql> SHOW WARNINGS;
     +---------+------+---------------------------------------------------------------+
     | Level   | Code | Message                                                       |
     +---------+------+---------------------------------------------------------------+
     | Warning | 1475 | Converted FIXED field to DYNAMIC to enable on-line ADD COLUMN |
     | Warning | 1475 | Converted FIXED field to DYNAMIC to enable on-line ADD COLUMN |
     +---------+------+---------------------------------------------------------------+
     2 rows in set (0.00 sec)

*Note*:

Existing columns, including the table's primary key, need not be
dynamic; only the column or columns to be added online must be dynamic.

     mysql> CREATE TABLE t2 (
          >     c1 INT NOT NULL AUTO_INCREMENT PRIMARY KEY COLUMN_FORMAT FIXED
          >     ) ENGINE=NDBCLUSTER;
     Query OK, 0 rows affected (2.10 sec)

     mysql> ALTER ONLINE TABLE t2 ADD COLUMN c2 INT;
     Query OK, 0 rows affected, 1 warning (0.78 sec)
     Records: 0  Duplicates: 0  Warnings: 0

     mysql> SHOW WARNINGS;
     +---------+------+---------------------------------------------------------------+
     | Level   | Code | Message                                                       |
     +---------+------+---------------------------------------------------------------+
     | Warning | 1475 | Converted FIXED field to DYNAMIC to enable on-line ADD COLUMN |
     +---------+------+---------------------------------------------------------------+
     1 row in set (0.00 sec)

Columns are not converted from `FIXED' to `DYNAMIC' column format by
renaming operations.  For more information about `COLUMN_FORMAT', see
*Note create-table::.

The `KEY', `CONSTRAINT', and `IGNORE' keywords are supported in *Note
`ALTER TABLE': alter-table. statements using the `ONLINE' keyword.


File: manual.info,  Node: alter-table-examples,  Prev: alter-table-online-operations,  Up: alter-table

13.1.7.3 `ALTER TABLE' Examples
...............................

Begin with a table `t1' that is created as shown here:

     CREATE TABLE t1 (a INTEGER,b CHAR(10));

To rename the table from `t1' to `t2':

     ALTER TABLE t1 RENAME t2;

To change column `a' from *Note `INTEGER': integer-types. to `TINYINT
NOT NULL' (leaving the name the same), and to change column `b' from
`CHAR(10)' to `CHAR(20)' as well as renaming it from `b' to `c':

     ALTER TABLE t2 MODIFY a TINYINT NOT NULL, CHANGE b c CHAR(20);

To add a new *Note `TIMESTAMP': datetime. column named `d':

     ALTER TABLE t2 ADD d TIMESTAMP;

To add an index on column `d' and a `UNIQUE' index on column `a':

     ALTER TABLE t2 ADD INDEX (d), ADD UNIQUE (a);

To remove column `c':

     ALTER TABLE t2 DROP COLUMN c;

To add a new `AUTO_INCREMENT' integer column named `c':

     ALTER TABLE t2 ADD c INT UNSIGNED NOT NULL AUTO_INCREMENT,
       ADD PRIMARY KEY (c);

We indexed `c' (as a `PRIMARY KEY') because `AUTO_INCREMENT' columns
must be indexed, and we declare `c' as `NOT NULL' because primary key
columns cannot be `NULL'.

For *Note `NDB': mysql-cluster. tables, it is also possible to change
the storage type used for a table or column. For example, consider an
*Note `NDB': mysql-cluster. table created as shown here:

     mysql> CREATE TABLE t1 (c1 INT) TABLESPACE ts_1 ENGINE NDB;
     Query OK, 0 rows affected (1.27 sec)

To convert this table to disk-based storage, you can use the following
*Note `ALTER TABLE': alter-table. statement:

     mysql> ALTER TABLE t1 TABLESPACE ts_1 STORAGE DISK;
     Query OK, 0 rows affected (2.99 sec)
     Records: 0  Duplicates: 0  Warnings: 0

     mysql> SHOW CREATE TABLE t1\G
     *************************** 1. row ***************************
            Table: t1
     Create Table: CREATE TABLE `t1` (
       `c1` int(11) DEFAULT NULL
     ) /*!50100 TABLESPACE ts_1 STORAGE DISK */
     ENGINE=ndbcluster DEFAULT CHARSET=latin1
     1 row in set (0.01 sec)

It is not necessary that the tablespace was referenced when the table
was originally created; however, the tablespace must be referenced by
the *Note `ALTER TABLE': alter-table.:

     mysql> CREATE TABLE t2 (c1 INT) ts_1 ENGINE NDB;
     Query OK, 0 rows affected (1.00 sec)

     mysql> ALTER TABLE t2 STORAGE DISK;
     `ERROR 1005 (HY000): Can't create table 'c.#sql-1750_3' (errno: 140)'
     mysql> ALTER TABLE t2 TABLESPACE ts_1 STORAGE DISK;
     Query OK, 0 rows affected (3.42 sec)
     Records: 0  Duplicates: 0  Warnings: 0
     mysql> SHOW CREATE TABLE t2\G
     *************************** 1. row ***************************
            Table: t1
     Create Table: CREATE TABLE `t2` (
       `c1` int(11) DEFAULT NULL
     ) /*!50100 TABLESPACE ts_1 STORAGE DISK */
     ENGINE=ndbcluster DEFAULT CHARSET=latin1
     1 row in set (0.01 sec)

To change the storage type of an individual column, you can use `ALTER
TABLE ... MODIFY [COLUMN]'. For example, suppose you create a MySQL
Cluster Disk Data table with two columns, using this *Note `CREATE
TABLE': create-table.  statement:

     mysql> CREATE TABLE t3 (c1 INT, c2 INT)
         ->     TABLESPACE ts_1 STORAGE DISK ENGINE NDB;
     Query OK, 0 rows affected (1.34 sec)

To change column `c2' from disk-based to in-memory storage, include a
STORAGE MEMORY clause in the column definition used by the ALTER TABLE
statement, as shown here:

     mysql> ALTER TABLE t3 MODIFY c2 INT STORAGE MEMORY;
     Query OK, 0 rows affected (3.14 sec)
     Records: 0  Duplicates: 0  Warnings: 0

You can make an in-memory column into a disk-based column by using
`STORAGE DISK' in a similar fashion.

Column `c1' uses disk-based storage, since this is the default for the
table (determined by the table-level `STORAGE DISK' clause in the *Note
`CREATE TABLE': create-table. statement). However, column `c2' uses
in-memory storage, as can be seen here in the output of SHOW *Note
`CREATE TABLE': create-table.:

     mysql> SHOW CREATE TABLE t3\G
     *************************** 1. row ***************************
            Table: t3
     Create Table: CREATE TABLE `t3` (
       `c1` int(11) DEFAULT NULL,
       `c2` int(11) /*!50120 STORAGE MEMORY */ DEFAULT NULL
     ) /*!50100 TABLESPACE ts_1 STORAGE DISK */ ENGINE=ndbcluster DEFAULT CHARSET=latin1
     1 row in set (0.02 sec)

When you add an `AUTO_INCREMENT' column, column values are filled in
with sequence numbers automatically. For `MyISAM' tables, you can set
the first sequence number by executing `SET INSERT_ID=VALUE' before
*Note `ALTER TABLE': alter-table. or by using the `AUTO_INCREMENT=VALUE'
table option. See *Note server-system-variables::.

With `MyISAM' tables, if you do not change the `AUTO_INCREMENT' column,
the sequence number is not affected. If you drop an `AUTO_INCREMENT'
column and then add another `AUTO_INCREMENT' column, the numbers are
resequenced beginning with 1.

When replication is used, adding an `AUTO_INCREMENT' column to a table
might not produce the same ordering of the rows on the slave and the
master. This occurs because the order in which the rows are numbered
depends on the specific storage engine used for the table and the order
in which the rows were inserted. If it is important to have the same
order on the master and slave, the rows must be ordered before
assigning an `AUTO_INCREMENT' number. Assuming that you want to add an
`AUTO_INCREMENT' column to the table `t1', the following statements
produce a new table `t2' identical to `t1' but with an `AUTO_INCREMENT'
column:

     CREATE TABLE t2 (id INT AUTO_INCREMENT PRIMARY KEY)
     SELECT * FROM t1 ORDER BY col1, col2;

This assumes that the table `t1' has columns `col1' and `col2'.

This set of statements will also produce a new table `t2' identical to
`t1', with the addition of an `AUTO_INCREMENT' column:

     CREATE TABLE t2 LIKE t1;
     ALTER TABLE t2 ADD id INT AUTO_INCREMENT PRIMARY KEY;
     INSERT INTO t2 SELECT * FROM t1 ORDER BY col1, col2;

*Important*:

To guarantee the same ordering on both master and slave, _all_ columns
of `t1' must be referenced in the `ORDER BY' clause.

Regardless of the method used to create and populate the copy having
the `AUTO_INCREMENT' column, the final step is to drop the original
table and then rename the copy:

     DROP t1;
     ALTER TABLE t2 RENAME t1;


File: manual.info,  Node: alter-tablespace,  Next: alter-view,  Prev: alter-table,  Up: sql-syntax-data-definition

13.1.8 `ALTER TABLESPACE' Syntax
--------------------------------

     ALTER TABLESPACE TABLESPACE_NAME
         {ADD|DROP} DATAFILE 'FILE_NAME'
         [INITIAL_SIZE [=] SIZE]
         [WAIT]
         ENGINE [=] ENGINE_NAME

This statement can be used either to add a new data file, or to drop a
data file from a tablespace.

The `ADD DATAFILE' variant enables you to specify an initial size using
an `INITIAL_SIZE' clause, where SIZE is measured in bytes; the default
value is `128M' (128 megabytes). You may optionally follow this integer
value with a one-letter abbreviation for an order of magnitude, similar
to those used in `my.cnf'. Generally, this is one of the letters `M'
(for megabytes) or `G' (for gigabytes).

*Note*:

All MySQL Cluster Disk Data objects share the same namespace.  This
means that _each Disk Data object_ must be uniquely named (and not
merely each Disk Data object of a given type). For example, you cannot
have a tablespace and an data file with the same name, or an undo log
file and a tablespace with the same name.

On 32-bit systems, the maximum supported value for `INITIAL_SIZE' is
`4G'. (Bug #29186)

`INITIAL_SIZE' is rounded, explicitly, as for *Note `CREATE
TABLESPACE': create-tablespace.

Once a data file has been created, its size cannot be changed; however,
you can add more data files to the tablespace using additional `ALTER
TABLESPACE ... ADD DATAFILE' statements.

Using `DROP DATAFILE' with *Note `ALTER TABLESPACE': alter-tablespace.
drops the data file 'FILE_NAME' from the tablespace.  You cannot drop a
data file from a tablespace which is in use by any table; in other
words, the data file must be empty (no extents used). See *Note
mysql-cluster-disk-data-objects::. In addition, any data file to be
dropped must previously have been added to the tablespace with *Note
`CREATE TABLESPACE': create-tablespace. or *Note `ALTER TABLESPACE':
alter-tablespace.

Both `ALTER TABLESPACE ... ADD DATAFILE' and `ALTER TABLESPACE ... DROP
DATAFILE' require an `ENGINE' clause which specifies the storage engine
used by the tablespace. Currently, the only accepted values for
ENGINE_NAME are *Note `NDB': mysql-cluster. and *Note `NDBCLUSTER':
mysql-cluster.

`WAIT' is parsed but otherwise ignored, and so has no effect in MySQL
5.5. It is intended for future expansion.

When `ALTER TABLESPACE ... ADD DATAFILE' is used with `ENGINE = NDB', a
data file is created on each Cluster data node. You can verify that the
data files were created and obtain information about them by querying
the *Note `INFORMATION_SCHEMA.FILES': files-table. table. For example,
the following query shows all data files belonging to the tablespace
named `newts':

     mysql> SELECT LOGFILE_GROUP_NAME, FILE_NAME, EXTRA
         -> FROM INFORMATION_SCHEMA.FILES
         -> WHERE TABLESPACE_NAME = 'newts' AND FILE_TYPE = 'DATAFILE';
     +--------------------+--------------+----------------+
     | LOGFILE_GROUP_NAME | FILE_NAME    | EXTRA          |
     +--------------------+--------------+----------------+
     | lg_3               | newdata.dat  | CLUSTER_NODE=3 |
     | lg_3               | newdata.dat  | CLUSTER_NODE=4 |
     | lg_3               | newdata2.dat | CLUSTER_NODE=3 |
     | lg_3               | newdata2.dat | CLUSTER_NODE=4 |
     +--------------------+--------------+----------------+
     2 rows in set (0.03 sec)

See *Note files-table::.

*Note `ALTER TABLESPACE': alter-tablespace. is useful only with Disk
Data storage for MySQL Cluster. See *Note mysql-cluster-disk-data::.


File: manual.info,  Node: alter-view,  Next: create-database,  Prev: alter-tablespace,  Up: sql-syntax-data-definition

13.1.9 `ALTER VIEW' Syntax
--------------------------

     ALTER
         [ALGORITHM = {UNDEFINED | MERGE | TEMPTABLE}]
         [DEFINER = { USER | CURRENT_USER }]
         [SQL SECURITY { DEFINER | INVOKER }]
         VIEW VIEW_NAME [(COLUMN_LIST)]
         AS SELECT_STATEMENT
         [WITH [CASCADED | LOCAL] CHECK OPTION]

This statement changes the definition of a view, which must exist.  The
syntax is similar to that for *Note `CREATE VIEW': create-view. and the
effect is the same as for *Note `CREATE OR REPLACE VIEW': create-view.
See *Note create-view::. This statement requires the `CREATE VIEW' and
`DROP' privileges for the view, and some privilege for each column
referred to in the *Note `SELECT': select. statement.  *Note `ALTER
VIEW': alter-view. is permitted only to the definer or users with the
`SUPER' privilege.


File: manual.info,  Node: create-database,  Next: create-event,  Prev: alter-view,  Up: sql-syntax-data-definition

13.1.10 `CREATE DATABASE' Syntax
--------------------------------

     CREATE {DATABASE | SCHEMA} [IF NOT EXISTS] DB_NAME
         [CREATE_SPECIFICATION] ...

     CREATE_SPECIFICATION:
         [DEFAULT] CHARACTER SET [=] CHARSET_NAME
       | [DEFAULT] COLLATE [=] COLLATION_NAME

*Note `CREATE DATABASE': create-database. creates a database with the
given name. To use this statement, you need the `CREATE' privilege for
the database.  *Note `CREATE SCHEMA': create-database. is a synonym for
*Note `CREATE DATABASE': create-database.

An error occurs if the database exists and you did not specify `IF NOT
EXISTS'.

As of MySQL 5.5.3, *Note `CREATE DATABASE': create-database.  is not
permitted within a session that has an active *Note `LOCK TABLES':
lock-tables. statement.

CREATE_SPECIFICATION options specify database characteristics. Database
characteristics are stored in the `db.opt' file in the database
directory.  The `CHARACTER SET' clause specifies the default database
character set. The `COLLATE' clause specifies the default database
collation.  *Note charset::, discusses character set and collation
names.

A database in MySQL is implemented as a directory containing files that
correspond to tables in the database. Because there are no tables in a
database when it is initially created, the *Note `CREATE DATABASE':
create-database. statement creates only a directory under the MySQL
data directory and the `db.opt' file. Rules for permissible database
names are given in *Note identifiers::. If a database name contains
special characters, the name for the database directory contains
encoded versions of those characters as described in *Note
identifier-mapping::.

If you manually create a directory under the data directory (for
example, with `mkdir'), the server considers it a database directory
and it shows up in the output of *Note `SHOW DATABASES': show-databases.

You can also use the *Note `mysqladmin': mysqladmin. program to create
databases. See *Note mysqladmin::.


File: manual.info,  Node: create-event,  Next: create-function,  Prev: create-database,  Up: sql-syntax-data-definition

13.1.11 `CREATE EVENT' Syntax
-----------------------------

     CREATE
         [DEFINER = { USER | CURRENT_USER }]
         EVENT
         [IF NOT EXISTS]
         EVENT_NAME
         ON SCHEDULE SCHEDULE
         [ON COMPLETION [NOT] PRESERVE]
         [ENABLE | DISABLE | DISABLE ON SLAVE]
         [COMMENT 'COMMENT']
         DO EVENT_BODY;

     SCHEDULE:
         AT TIMESTAMP [+ INTERVAL INTERVAL] ...
       | EVERY INTERVAL
         [STARTS TIMESTAMP [+ INTERVAL INTERVAL] ...]
         [ENDS TIMESTAMP [+ INTERVAL INTERVAL] ...]

     INTERVAL:
         QUANTITY {YEAR | QUARTER | MONTH | DAY | HOUR | MINUTE |
                   WEEK | SECOND | YEAR_MONTH | DAY_HOUR | DAY_MINUTE |
                   DAY_SECOND | HOUR_MINUTE | HOUR_SECOND | MINUTE_SECOND}

This statement creates and schedules a new event. The event will not
run unless the Event Scheduler is enabled. For information about
checking Event Scheduler status and enabling it if necessary, see *Note
events-configuration::.

*Note `CREATE EVENT': create-event. requires the `EVENT' privilege for
the schema in which the event is to be created. It might also require
the `SUPER' privilege, depending on the `DEFINER' value, as described
later in this section.

The minimum requirements for a valid *Note `CREATE EVENT':
create-event. statement are as follows:

   * The keywords *Note `CREATE EVENT': create-event. plus an event
     name, which uniquely identifies the event in a database schema.

   * An `ON SCHEDULE' clause, which determines when and how often the
     event executes.

   * A *Note `DO': do. clause, which contains the SQL statement to be
     executed by an event.

This is an example of a minimal *Note `CREATE EVENT': create-event.
statement:

     CREATE EVENT myevent
         ON SCHEDULE AT CURRENT_TIMESTAMP + INTERVAL 1 HOUR
         DO
           UPDATE myschema.mytable SET mycol = mycol + 1;

The previous statement creates an event named `myevent'. This event
executes once--one hour following its creation--by running an SQL
statement that increments the value of the `myschema.mytable' table's
`mycol' column by 1.

The EVENT_NAME must be a valid MySQL identifier with a maximum length
of 64 characters. Event names are not case sensitive, so you cannot
have two events named `myevent' and `MyEvent' in the same schema. In
general, the rules governing event names are the same as those for
names of stored routines. See *Note identifiers::.

An event is associated with a schema. If no schema is indicated as part
of EVENT_NAME, the default (current) schema is assumed. To create an
event in a specific schema, qualify the event name with a schema using
`SCHEMA_NAME.EVENT_NAME' syntax.

The `DEFINER' clause specifies the MySQL account to be used when
checking access privileges at event execution time. If a USER value is
given, it should be a MySQL account specified as
`'USER_NAME'@'HOST_NAME'' (the same format used in the *Note `GRANT':
grant.  statement), `CURRENT_USER', or `CURRENT_USER()'. The default
`DEFINER' value is the user who executes the *Note `CREATE EVENT':
create-event. statement. This is the same as specifying `DEFINER =
CURRENT_USER' explicitly.

If you specify the `DEFINER' clause, these rules determine the valid
`DEFINER' user values:

   * If you do not have the `SUPER' privilege, the only permitted USER
     value is your own account, either specified literally or by using
     `CURRENT_USER'. You cannot set the definer to some other account.

   * If you have the `SUPER' privilege, you can specify any
     syntactically valid account name. If the account does not actually
     exist, a warning is generated.

   * Although it is possible to create an event with a nonexistent
     `DEFINER' account, an error occurs at event execution time if the
     account does not exist.

For more information about event security, see *Note
stored-programs-security::.

Within an event, the `CURRENT_USER()' function returns the account used
to check privileges at event execution time, which is the `DEFINER'
user. For information about user auditing within events, see *Note
account-activity-auditing::.

`IF NOT EXISTS' has the same meaning for *Note `CREATE EVENT':
create-event. as for *Note `CREATE TABLE': create-table.: If an event
named EVENT_NAME already exists in the same schema, no action is taken,
and no error results. (However, a warning is generated in such cases.)

The `ON SCHEDULE' clause determines when, how often, and for how long
the EVENT_BODY defined for the event repeats. This clause takes one of
two forms:

   * `AT TIMESTAMP' is used for a one-time event. It specifies that the
     event executes one time only at the date and time given by
     TIMESTAMP, which must include both the date and time, or must be
     an expression that resolves to a datetime value. You may use a
     value of either the *Note `DATETIME': datetime. or *Note
     `TIMESTAMP': datetime. type for this purpose. If the date is in
     the past, a warning occurs, as shown here:

          mysql> SELECT NOW();
          +---------------------+
          | NOW()               |
          +---------------------+
          | 2006-02-10 23:59:01 |
          +---------------------+
          1 row in set (0.04 sec)

          mysql> CREATE EVENT e_totals
              ->     ON SCHEDULE AT '2006-02-10 23:59:00'
              ->     DO INSERT INTO test.totals VALUES (NOW());
          Query OK, 0 rows affected, 1 warning (0.00 sec)

          mysql> SHOW WARNINGS\G
          *************************** 1. row ***************************
            Level: Note
             Code: 1588
          Message: Event execution time is in the past and ON COMPLETION NOT
                   PRESERVE is set. The event was dropped immediately after
                   creation.

     *Note `CREATE EVENT': create-event. statements which are
     themselves invalid--for whatever reason--fail with an error.

     You may use `CURRENT_TIMESTAMP' to specify the current date and
     time. In such a case, the event acts as soon as it is created.

     To create an event which occurs at some point in the future
     relative to the current date and time--such as that expressed by
     the phrase `three weeks from now'--you can use the optional clause
     `+ INTERVAL INTERVAL'. The INTERVAL portion consists of two parts,
     a quantity and a unit of time, and follows the same syntax rules
     that govern intervals used in the `DATE_ADD()' function (see *Note
     date-and-time-functions::. The units keywords are also the same,
     except that you cannot use any units involving microseconds when
     defining an event. With some interval types, complex time units
     may be used. For example, `two minutes and ten seconds' can be
     expressed as `+ INTERVAL '2:10' MINUTE_SECOND'.

     You can also combine intervals. For example, `AT CURRENT_TIMESTAMP
     + INTERVAL 3 WEEK + INTERVAL 2 DAY' is equivalent to `three weeks
     and two days from now'. Each portion of such a clause must begin
     with `+ INTERVAL'.

   * To repeat actions at a regular interval, use an `EVERY' clause.
     The `EVERY' keyword is followed by an INTERVAL as described in the
     previous discussion of the `AT' keyword. (`+ INTERVAL' is _not_
     used with `EVERY'.) For example, `EVERY 6 WEEK' means `every six
     weeks'.

     Although `+ INTERVAL' clauses are not permitted in an `EVERY'
     clause, you can use the same complex time units permitted in a `+
     INTERVAL'.

     An `EVERY' clause may contain an optional `STARTS' clause.
     `STARTS' is followed by a TIMESTAMP value that indicates when the
     action should begin repeating, and may also use `+ INTERVAL
     INTERVAL' to specify an amount of time `from now'. For example,
     `EVERY 3 MONTH STARTS CURRENT_TIMESTAMP + INTERVAL 1 WEEK' means
     `every three months, beginning one week from now'. Similarly, you
     can express `every two weeks, beginning six hours and fifteen
     minutes from now' as `EVERY 2 WEEK STARTS CURRENT_TIMESTAMP +
     INTERVAL '6:15' HOUR_MINUTE'. Not specifying `STARTS' is the same
     as using `STARTS CURRENT_TIMESTAMP'--that is, the action specified
     for the event begins repeating immediately upon creation of the
     event.

     An `EVERY' clause may contain an optional `ENDS' clause. The `ENDS'
     keyword is followed by a TIMESTAMP value that tells MySQL when the
     event should stop repeating.  You may also use `+ INTERVAL
     INTERVAL' with `ENDS'; for instance, `EVERY 12 HOUR STARTS
     CURRENT_TIMESTAMP + INTERVAL 30 MINUTE ENDS CURRENT_TIMESTAMP +
     INTERVAL 4 WEEK' is equivalent to `every twelve hours, beginning
     thirty minutes from now, and ending four weeks from now'. Not using
     `ENDS' means that the event continues executing indefinitely.

     `ENDS' supports the same syntax for complex time units as `STARTS'
     does.

     You may use `STARTS', `ENDS', both, or neither in an `EVERY'
     clause.

     If a repeating event does not terminate within its scheduling
     interval, the result may be multiple instances of the event
     executing simultaneously. If this is undesirable, you should
     institute a mechanism to prevent simultaneous instances. For
     example, you could use the `GET_LOCK()' function, or row or table
     locking.

The `ON SCHEDULE' clause may use expressions involving built-in MySQL
functions and user variables to obtain any of the TIMESTAMP or INTERVAL
values which it contains. You may not use stored functions or
user-defined functions in such expressions, nor may you use any table
references; however, you may use `SELECT FROM DUAL'. This is true for
both *Note `CREATE EVENT': create-event. and *Note `ALTER EVENT':
alter-event. statements. References to stored functions, user-defined
functions, and tables in such cases are specifically not permitted, and
fail with an error (see Bug #22830).

Times in the `ON SCHEDULE' clause are interpreted using the current
session `time_zone' value. This becomes the event time zone; that is,
the time zone that is used for event scheduling and is in effect within
the event as it executes. These times are converted to UTC and stored
along with the event time zone in the `mysql.event' table. This enables
event execution to proceed as defined regardless of any subsequent
changes to the server time zone or daylight saving time effects.  For
additional information about representation of event times, see *Note
events-metadata::. See also *Note show-events::, and *Note
events-table::.

Normally, once an event has expired, it is immediately dropped.  You
can override this behavior by specifying `ON COMPLETION PRESERVE'.
Using `ON COMPLETION NOT PRESERVE' merely makes the default
nonpersistent behavior explicit.

You can create an event but prevent it from being active using the
`DISABLE' keyword. Alternatively, you can use `ENABLE' to make explicit
the default status, which is active. This is most useful in conjunction
with *Note `ALTER EVENT': alter-event. (see *Note alter-event::).

A third value may also appear in place of `ENABLED' or `DISABLED';
`DISABLE ON SLAVE' is set for the status of an event on a replication
slave to indicate that the event was created on the master and
replicated to the slave, but is not executed on the slave. See *Note
replication-features-invoked::.

You may supply a comment for an event using a `COMMENT' clause.
COMMENT may be any string of up to 64 characters that you wish to use
for describing the event. The comment text, being a string literal,
must be surrounded by quotation marks.

The *Note `DO': do. clause specifies an action carried by the event,
and consists of an SQL statement. Nearly any valid MySQL statement that
can be used in a stored routine can also be used as the action
statement for a scheduled event. (See *Note
stored-program-restrictions::.) For example, the following event
`e_hourly' deletes all rows from the `sessions' table once per hour,
where this table is part of the `site_activity' schema:

     CREATE EVENT e_hourly
         ON SCHEDULE
           EVERY 1 HOUR
         COMMENT 'Clears out sessions table each hour.'
         DO
           DELETE FROM site_activity.sessions;

MySQL stores the `sql_mode' system variable setting in effect when an
event is created or altered, and always executes the event with this
setting in force, _regardless of the current server SQL mode when the
event begins executing_.

A *Note `CREATE EVENT': create-event. statement that contains an *Note
`ALTER EVENT': alter-event. statement in its *Note `DO': do. clause
appears to succeed; however, when the server attempts to execute the
resulting scheduled event, the execution fails with an error.

*Note*:

Statements such as *Note `SELECT': select. or *Note `SHOW': show. that
merely return a result set have no effect when used in an event; the
output from these is not sent to the MySQL Monitor, nor is it stored
anywhere.  However, you can use statements such as *Note `SELECT ...
INTO': select. and *Note `INSERT INTO ... SELECT': insert-select. that
store a result. (See the next example in this section for an instance
of the latter.)

The schema to which an event belongs is the default schema for table
references in the *Note `DO': do. clause.  Any references to tables in
other schemas must be qualified with the proper schema name.

As with stored routines, you can use compound-statement syntax in the
*Note `DO': do. clause by using the `BEGIN' and `END' keywords, as
shown here:

     delimiter |

     CREATE EVENT e_daily
         ON SCHEDULE
           EVERY 1 DAY
         COMMENT 'Saves total number of sessions then clears the table each day'
         DO
           BEGIN
             INSERT INTO site_activity.totals (time, total)
               SELECT CURRENT_TIMESTAMP, COUNT(*)
                 FROM site_activity.sessions;
             DELETE FROM site_activity.sessions;
           END |

     delimiter ;

This example uses the `delimiter' command to change the statement
delimiter. See *Note stored-programs-defining::.

More complex compound statements, such as those used in stored
routines, are possible in an event. This example uses local variables,
an error handler, and a flow control construct:

     delimiter |

     CREATE EVENT e
         ON SCHEDULE
           EVERY 5 SECOND
         DO
           BEGIN
             DECLARE v INTEGER;
             DECLARE CONTINUE HANDLER FOR SQLEXCEPTION BEGIN END;

             SET v = 0;

             WHILE v < 5 DO
               INSERT INTO t1 VALUES (0);
               UPDATE t2 SET s1 = s1 + 1;
               SET v = v + 1;
             END WHILE;
         END |

     delimiter ;

There is no way to pass parameters directly to or from events; however,
it is possible to invoke a stored routine with parameters within an
event:

     CREATE EVENT e_call_myproc
         ON SCHEDULE
           AT CURRENT_TIMESTAMP + INTERVAL 1 DAY
         DO CALL myproc(5, 27);

If an event's definer has the `SUPER' privilege, the event can read and
write global variables. As granting this privilege entails a potential
for abuse, extreme care must be taken in doing so.

Generally, any statements that are valid in stored routines may be used
for action statements executed by events. For more information about
statements permitted within stored routines, see *Note
stored-routines-syntax::. You can create an event as part of a stored
routine, but an event cannot be created by another event.


File: manual.info,  Node: create-function,  Next: create-index,  Prev: create-event,  Up: sql-syntax-data-definition

13.1.12 `CREATE FUNCTION' Syntax
--------------------------------

The *Note `CREATE FUNCTION': create-function. statement is used to
create stored functions and user-defined functions (UDFs):

   * For information about creating stored functions, see *Note
     create-procedure::.

   * For information about creating user-defined functions, see *Note
     create-function-udf::.


File: manual.info,  Node: create-index,  Next: create-logfile-group,  Prev: create-function,  Up: sql-syntax-data-definition

13.1.13 `CREATE INDEX' Syntax
-----------------------------

     CREATE [ONLINE|OFFLINE] [UNIQUE|FULLTEXT|SPATIAL] INDEX INDEX_NAME
         [INDEX_TYPE]
         ON TBL_NAME (INDEX_COL_NAME,...)
         [INDEX_OPTION] ...

     INDEX_COL_NAME:
         COL_NAME [(LENGTH)] [ASC | DESC]

     INDEX_TYPE:
         USING {BTREE | HASH}

     INDEX_OPTION:
         KEY_BLOCK_SIZE [=] VALUE
       | INDEX_TYPE
       | WITH PARSER PARSER_NAME
       | COMMENT 'STRING'

*Note `CREATE INDEX': create-index. is mapped to an *Note `ALTER
TABLE': alter-table. statement to create indexes. See *Note
alter-table::.  *Note `CREATE INDEX': create-index. cannot be used to
create a `PRIMARY KEY'; use *Note `ALTER TABLE': alter-table. instead.
For more information about indexes, see *Note mysql-indexes::.

Normally, you create all indexes on a table at the time the table
itself is created with *Note `CREATE TABLE': create-table. See *Note
create-table::. This guideline is especially important for `InnoDB'
tables, where the primary key determines the physical layout of rows in
the data file. *Note `CREATE INDEX': create-index.  enables you to add
indexes to existing tables.

A column list of the form `(col1,col2,...)' creates a multiple-column
index. Index key values are formed by concatenating the values of the
given columns.

Indexes can be created that use only the leading part of column values,
using `COL_NAME(LENGTH)' syntax to specify an index prefix length:

   * Prefixes can be specified for *Note `CHAR': char, *Note `VARCHAR':
     char, *Note `BINARY': binary-varbinary, and *Note `VARBINARY':
     binary-varbinary. columns.

   * *Note `BLOB': blob. and *Note `TEXT': blob. columns also can be
     indexed, but a prefix length _must_ be given.

   * Prefix lengths are given in characters for nonbinary string types
     and in bytes for binary string types. That is, index entries
     consist of the first LENGTH characters of each column value for
     *Note `CHAR': char, *Note `VARCHAR': char, and *Note `TEXT': blob.
     columns, and the first LENGTH bytes of each column value for *Note
     `BINARY': binary-varbinary, *Note `VARBINARY': binary-varbinary,
     and *Note `BLOB': blob. columns.

   * For spatial columns, prefix values cannot be given, as described
     later in this section.

The statement shown here creates an index using the first 10 characters
of the `name' column:

     CREATE INDEX part_of_name ON customer (name(10));

If names in the column usually differ in the first 10 characters, this
index should not be much slower than an index created from the entire
`name' column. Also, using column prefixes for indexes can make the
index file much smaller, which could save a lot of disk space and might
also speed up *Note `INSERT': insert. operations.

Prefix support and lengths of prefixes (where supported) are storage
engine dependent. For example, a prefix can be up to 1000 bytes long
for `MyISAM' tables, and 767 bytes for `InnoDB' tables. The
`NDBCLUSTER' storage engine does not support prefixes (see *Note
mysql-cluster-limitations-unsupported::).

*Note*:

Prefix limits are measured in bytes, whereas the prefix length in *Note
`CREATE INDEX': create-index. statements is interpreted as number of
characters for nonbinary data types (*Note `CHAR': char, *Note
`VARCHAR': char, *Note `TEXT': blob.). Take this into account when
specifying a prefix length for a column that uses a multi-byte
character set.

Indexes on variable-width columns of *Note `NDBCLUSTER': mysql-cluster.
tables are created online; that is, without any table copying. The
table is not locked against access from other MySQL Cluster API nodes,
although it is locked against other operations on the _same_ API node
for the duration of the operation. This is done automatically by the
server whenever it determines that it is possible to do so; you do not
have to use any special SQL syntax or server options to cause it to
happen.

In standard MySQL 5.5 releases, it is not possible to override the
server when it determines that an index is to be created without table
copying. In MySQL Cluster, you can create indexes offline (which causes
the table to be locked to all API nodes in the cluster) using the
`OFFLINE' keyword. The rules and limitations governing `CREATE OFFLINE
INDEX' and `CREATE ONLINE INDEX' are the same as for `ALTER OFFLINE
TABLE ... ADD INDEX' and `ALTER ONLINE TABLE ... ADD INDEX'. You cannot
cause the noncopying creation of an index that would normally be
created offline by using the `ONLINE' keyword: If it is not possible to
perform the *Note `CREATE INDEX': create-index. operation without table
copying, the server ignores the `ONLINE' keyword. For more information,
see *Note alter-table-online-operations::.

*Note*:

The `ONLINE' and `OFFLINE' keywords are available only in MySQL
Cluster; attempting to use these keywords in standard MySQL Server 5.5
releases results in a syntax error.

A `UNIQUE' index creates a constraint such that all values in the index
must be distinct. An error occurs if you try to add a new row with a
key value that matches an existing row. For all engines, a `UNIQUE'
index permits multiple `NULL' values for columns that can contain
`NULL'. If you specify a prefix value for a column in a `UNIQUE' index,
the column values must be unique within the prefix.

`FULLTEXT' indexes are supported only for `MyISAM' tables and can
include only *Note `CHAR': char, *Note `VARCHAR': char, and *Note
`TEXT': blob. columns. Indexing always happens over the entire column;
column prefix indexing is not supported and any prefix length is
ignored if specified. See *Note fulltext-search::, for details of
operation.

The `MyISAM', `InnoDB', *Note `NDB': mysql-cluster, and `ARCHIVE'
storage engines support spatial columns such as (`POINT' and `GEOMETRY'.
(*Note spatial-extensions::, describes the spatial data types.)
However, support for spatial column indexing varies among engines.
Spatial and nonspatial indexes are available according to the following
rules.

Spatial indexes (created using `SPATIAL INDEX') have these
characteristics:

   * Available only for `MyISAM' tables.  Specifying `SPATIAL INDEX'
     for other storage engines results in an error.

   * Indexed columns must be `NOT NULL'.

   * In MySQL 5.5, column prefix lengths are prohibited. The full width
     of each column is indexed.

Characteristics of nonspatial indexes (created with `INDEX', `UNIQUE',
or `PRIMARY KEY'):

   * Permitted for any storage engine that supports spatial columns
     except `ARCHIVE'.

   * Columns can be `NULL' unless the index is a primary key.

   * For each spatial column in a non-`SPATIAL' index except `POINT'
     columns, a column prefix length must be specified. (This is the
     same requirement as for indexed *Note `BLOB': blob. columns.) The
     prefix length is given in bytes.

   * The index type for a non-`SPATIAL' index depends on the storage
     engine. Currently, B-tree is used.

In MySQL 5.5:

   * You can add an index on a column that can have `NULL' values only
     if you are using the `MyISAM', `InnoDB', or `MEMORY' storage
     engine.

   * You can add an index on a *Note `BLOB': blob.  or *Note `TEXT':
     blob. column only if you are using the `MyISAM', or `InnoDB'
     storage engine.

An INDEX_COL_NAME specification can end with `ASC' or `DESC'. These
keywords are permitted for future extensions for specifying ascending
or descending index value storage. Currently, they are parsed but
ignored; index values are always stored in ascending order.

Following the index column list, index options can be given. An
INDEX_OPTION value can be any of the following:

   * `KEY_BLOCK_SIZE [=] VALUE'

     For compressed `InnoDB' tables, optionally specifies the size in
     bytes to use for pages. The value is treated as a hint; a
     different size could be used if necessary. A value of 0 represents
     the default compressed page size. See *Note innodb-compression::
     for usage details.

     *Note*:

     Oracle recommends enabling `innodb_strict_mode' when using the
     `KEY_BLOCK_SIZE' clause for `InnoDB' tables. See *Note
     innodb-other-changes-strict-mode:: for details.

   * INDEX_TYPE

     Some storage engines permit you to specify an index type when
     creating an index. The permissible index type values supported by
     different storage engines are shown in the following table.  Where
     multiple index types are listed, the first one is the default when
     no index type specifier is given.

     This table lists permissible index types for each storage engine.

     Storage       Permissible Index Types
     Engine        
     `MyISAM'      `BTREE'
     `InnoDB'      `BTREE'
     `MEMORY'/`HEAP'`HASH', `BTREE'
     *Note `NDB':  `BTREE', `HASH' (see note in text)
     mysql-cluster.

     Example:

          CREATE TABLE lookup (id INT) ENGINE = MEMORY;
          CREATE INDEX id_index ON lookup (id) USING BTREE;

     `BTREE' indexes are implemented by the *Note `NDBCLUSTER':
     mysql-cluster. storage engine as T-tree indexes.

     *Note*:

     For indexes on *Note `NDB': mysql-cluster. table columns, the
     `USING' option can be specified only for a unique index or primary
     key.  `USING HASH' prevents the creation of an implicit ordered
     index; otherwise, creating a unique index or primary key on an
     *Note `NDB': mysql-cluster. table automatically results in the
     creation of both an ordered index and a hash index, each of which
     indexes the same set of columns.

     This means that a query using a unique index or primary key on a
     `NULL' column is always handled by *Note `NDB': mysql-cluster.
     with a full scan of the table. In particular, if you plan to use
     an `IS NULL' or `IS NOT NULL' condition involving a unique index
     or primary key column of an *Note `NDB': mysql-cluster. table, you
     should create any such index without `USING HASH'.

     The INDEX_TYPE clause cannot be used together with `SPATIAL INDEX'.

     If you specify an index type that is not valid for a given storage
     engine, but there is another index type available that the engine
     can use without affecting query results, the engine uses the
     available type. The parser recognizes `RTREE' as a type name, but
     currently this cannot be specified for any storage engine.

     Use of this option before the `ON TBL_NAME' clause is deprecated;
     support for use of the option in this position will be removed in
     a future MySQL release. If an INDEX_TYPE option is given in both
     the earlier and later positions, the final option applies.

     `TYPE TYPE_NAME' is recognized as a synonym for `USING TYPE_NAME'.
     However, `USING' is the preferred form.

   * `WITH PARSER PARSER_NAME'

     This option can be used only with `FULLTEXT' indexes. It
     associates a parser plugin with the index if full-text indexing
     and searching operations need special handling. See *Note
     plugin-api::, for details on creating plugins.

   * `COMMENT 'STRING''

     As of MySQL 5.5.3, index definitions can include an optional
     comment of up to 1024 characters.


File: manual.info,  Node: create-logfile-group,  Next: create-procedure,  Prev: create-index,  Up: sql-syntax-data-definition

13.1.14 `CREATE LOGFILE GROUP' Syntax
-------------------------------------

     CREATE LOGFILE GROUP LOGFILE_GROUP
         ADD UNDOFILE 'UNDO_FILE'
         [INITIAL_SIZE [=] INITIAL_SIZE]
         [UNDO_BUFFER_SIZE [=] UNDO_BUFFER_SIZE]
         [REDO_BUFFER_SIZE [=] REDO_BUFFER_SIZE]
         [NODEGROUP [=] NODEGROUP_ID]
         [WAIT]
         [COMMENT [=] COMMENT_TEXT]
         ENGINE [=] ENGINE_NAME

This statement creates a new log file group named LOGFILE_GROUP having
a single `UNDO' file named 'UNDO_FILE'. A *Note `CREATE LOGFILE GROUP':
create-logfile-group. statement has one and only one `ADD UNDOFILE'
clause. For rules covering the naming of log file groups, see *Note
identifiers::.

*Note*:

All MySQL Cluster Disk Data objects share the same namespace.  This
means that _each Disk Data object_ must be uniquely named (and not
merely each Disk Data object of a given type). For example, you cannot
have a tablespace and a log file group with the same name, or a
tablespace and a data file with the same name.

In MySQL Cluster NDB 7.2, you can have only one log file group per
Cluster at any given time. (See Bug #16386)

The optional `INITIAL_SIZE' parameter sets the `UNDO' file's initial
size; if not specified, it defaults to `128M' (128 megabytes). The
optional `UNDO_BUFFER_SIZE' parameter sets the size used by the `UNDO'
buffer for the log file group; The default value for `UNDO_BUFFER_SIZE'
is `8M' (eight megabytes); this value cannot exceed the amount of
system memory available. Both of these parameters are specified in
bytes. You may optionally follow either or both of these with a
one-letter abbreviation for an order of magnitude, similar to those
used in `my.cnf'. Generally, this is one of the letters `M' (for
megabytes) or `G' (for gigabytes).

The memory used for both `INITIAL_SIZE' and `UNDO_BUFFER_SIZE' comes
from the global pool whose size is determined by the value of the
`SharedGlobalMemory' data node configuration parameter. This includes
any default value implied for these options by the setting of the
`InitialLogFileGroup' data node configuration parameter.

The maximum permitted for `UNDO_BUFFER_SIZE' is `600M'.

On 32-bit systems, the maximum supported value for `INITIAL_SIZE' is
`4G'.

The minimum permitted value for `INITIAL_SIZE' is `1M'.

The `ENGINE' option determines the storage engine to be used by this
log file group, with ENGINE_NAME being the name of the storage engine.
In MySQL 5.5, this must be *Note `NDB': mysql-cluster. (or *Note
`NDBCLUSTER': mysql-cluster.). If `ENGINE' is not set, MySQL tries to
use the engine specified by the `default_storage_engine' server system
variable (formerly `storage_engine'). In any case, if the engine is not
specified as *Note `NDB': mysql-cluster. or *Note `NDBCLUSTER':
mysql-cluster, the `CREATE LOGFILE GROUP' statement appears to succeed
but actually fails to create the log file group, as shown here:

     mysql> CREATE LOGFILE GROUP lg1
         ->     ADD UNDOFILE 'undo.dat' INITIAL_SIZE = 10M;
     Query OK, 0 rows affected, 1 warning (0.00 sec)

     mysql> SHOW WARNINGS;
     +-------+------+------------------------------------------------------------------------------------------------+
     | Level | Code | Message                                                                                        |
     +-------+------+------------------------------------------------------------------------------------------------+
     | Error | 1478 | `Table storage engine 'InnoDB' does not support the create option 'TABLESPACE or LOGFILE GROUP'' |
     +-------+------+------------------------------------------------------------------------------------------------+
     1 row in set (0.00 sec)

     mysql> DROP LOGFILE GROUP lg1 ENGINE = NDB;
     `ERROR 1529 (HY000): Failed to drop LOGFILE GROUP'

     mysql> CREATE LOGFILE GROUP lg1
         ->     ADD UNDOFILE 'undo.dat' INITIAL_SIZE = 10M
         ->     ENGINE = NDB;
     Query OK, 0 rows affected (2.97 sec)

The fact that the `CREATE LOGFILE GROUP' statement does not actually
return an error when a non-`NDB' storage engine is named, but rather
appears to succeed, is a known issue which we hope to address in a
future release of MySQL Cluster.

REDO_BUFFER_SIZE, `NODEGROUP', `WAIT', and `COMMENT' are parsed but
ignored, and so have no effect in MySQL 5.5. These options are intended
for future expansion.

When used with `ENGINE [=] NDB', a log file group and associated `UNDO'
log file are created on each Cluster data node. You can verify that the
`UNDO' files were created and obtain information about them by querying
the *Note `INFORMATION_SCHEMA.FILES': files-table. table. For example:

     mysql> SELECT LOGFILE_GROUP_NAME, LOGFILE_GROUP_NUMBER, EXTRA
         -> FROM INFORMATION_SCHEMA.FILES
         -> WHERE FILE_NAME = 'undo_10.dat';
     +--------------------+----------------------+----------------+
     | LOGFILE_GROUP_NAME | LOGFILE_GROUP_NUMBER | EXTRA          |
     +--------------------+----------------------+----------------+
     | lg_3               |                   11 | CLUSTER_NODE=3 |
     | lg_3               |                   11 | CLUSTER_NODE=4 |
     +--------------------+----------------------+----------------+
     2 rows in set (0.06 sec)

*Note `CREATE LOGFILE GROUP': create-logfile-group. is useful only with
Disk Data storage for MySQL Cluster. See *Note
mysql-cluster-disk-data::.


File: manual.info,  Node: create-procedure,  Next: create-server,  Prev: create-logfile-group,  Up: sql-syntax-data-definition

13.1.15 `CREATE PROCEDURE' and `CREATE FUNCTION' Syntax
-------------------------------------------------------

     CREATE
         [DEFINER = { USER | CURRENT_USER }]
         PROCEDURE SP_NAME ([PROC_PARAMETER[,...]])
         [CHARACTERISTIC ...] ROUTINE_BODY

     CREATE
         [DEFINER = { USER | CURRENT_USER }]
         FUNCTION SP_NAME ([FUNC_PARAMETER[,...]])
         RETURNS TYPE
         [CHARACTERISTIC ...] ROUTINE_BODY

     PROC_PARAMETER:
         [ IN | OUT | INOUT ] PARAM_NAME TYPE

     FUNC_PARAMETER:
         PARAM_NAME TYPE

     TYPE:
         ANY VALID MYSQL DATA TYPE

     CHARACTERISTIC:
         COMMENT 'STRING'
       | LANGUAGE SQL
       | [NOT] DETERMINISTIC
       | { CONTAINS SQL | NO SQL | READS SQL DATA | MODIFIES SQL DATA }
       | SQL SECURITY { DEFINER | INVOKER }

     ROUTINE_BODY:
         VALID SQL ROUTINE STATEMENT

These statements create stored routines. By default, a routine is
associated with the default database. To associate the routine
explicitly with a given database, specify the name as DB_NAME.SP_NAME
when you create it.

The *Note `CREATE FUNCTION': create-function. statement is also used in
MySQL to support UDFs (user-defined functions). See *Note
adding-functions::. A UDF can be regarded as an external stored
function. Stored functions share their namespace with UDFs. See *Note
function-resolution::, for the rules describing how the server
interprets references to different kinds of functions.

To invoke a stored procedure, use the *Note `CALL': call. statement (see
*Note call::). To invoke a stored function, refer to it in an
expression. The function returns a value during expression evaluation.

*Note `CREATE PROCEDURE': create-procedure. and *Note `CREATE
FUNCTION': create-function. require the `CREATE ROUTINE' privilege. They
might also require the `SUPER' privilege, depending on the `DEFINER'
value, as described later in this section. If binary logging is enabled,
*Note `CREATE FUNCTION': create-function. might require the `SUPER'
privilege, as described in *Note stored-programs-logging::.

By default, MySQL automatically grants the `ALTER ROUTINE' and
`EXECUTE' privileges to the routine creator. This behavior can be
changed by disabling the `automatic_sp_privileges' system variable. See
*Note stored-routines-privileges::.

The `DEFINER' and `SQL SECURITY' clauses specify the security context
to be used when checking access privileges at routine execution time,
as described later in this section.

If the routine name is the same as the name of a built-in SQL function,
a syntax error occurs unless you use a space between the name and the
following parenthesis when defining the routine or invoking it later.
For this reason, avoid using the names of existing SQL functions for
your own stored routines.

The `IGNORE_SPACE' SQL mode applies to built-in functions, not to
stored routines. It is always permissible to have spaces after a stored
routine name, regardless of whether `IGNORE_SPACE' is enabled.

The parameter list enclosed within parentheses must always be present.
If there are no parameters, an empty parameter list of `()' should be
used. Parameter names are not case sensitive.

Each parameter is an `IN' parameter by default.  To specify otherwise
for a parameter, use the keyword `OUT' or `INOUT' before the parameter
name.

*Note*:

Specifying a parameter as `IN', `OUT', or `INOUT' is valid only for a
`PROCEDURE'. For a `FUNCTION', parameters are always regarded as `IN'
parameters.

An `IN' parameter passes a value into a procedure. The procedure might
modify the value, but the modification is not visible to the caller
when the procedure returns. An `OUT' parameter passes a value from the
procedure back to the caller. Its initial value is `NULL' within the
procedure, and its value is visible to the caller when the procedure
returns. An `INOUT' parameter is initialized by the caller, can be
modified by the procedure, and any change made by the procedure is
visible to the caller when the procedure returns.

For each `OUT' or `INOUT' parameter, pass a user-defined variable in the
*Note `CALL': call. statement that invokes the procedure so that you
can obtain its value when the procedure returns. If you are calling the
procedure from within another stored procedure or function, you can
also pass a routine parameter or local routine variable as an `IN' or
`INOUT' parameter.

Routine parameters cannot be referenced in statements prepared within
the routine; see *Note stored-program-restrictions::.

The following example shows a simple stored procedure that uses an
`OUT' parameter:

     mysql> delimiter //

     mysql> CREATE PROCEDURE simpleproc (OUT param1 INT)
         -> BEGIN
         ->   SELECT COUNT(*) INTO param1 FROM t;
         -> END//
     Query OK, 0 rows affected (0.00 sec)

     mysql> delimiter ;

     mysql> CALL simpleproc(@a);
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT @a;
     +------+
     | @a   |
     +------+
     | 3    |
     +------+
     1 row in set (0.00 sec)

The example uses the *Note `mysql': mysql. client `delimiter' command
to change the statement delimiter from `;' to `//' while the procedure
is being defined. This enables the `;' delimiter used in the procedure
body to be passed through to the server rather than being interpreted by
*Note `mysql': mysql. itself. See *Note stored-programs-defining::.

The `RETURNS' clause may be specified only for a `FUNCTION', for which
it is mandatory. It indicates the return type of the function, and the
function body must contain a `RETURN VALUE' statement. If the *Note
`RETURN': return. statement returns a value of a different type, the
value is coerced to the proper type. For example, if a function
specifies an *Note `ENUM': enum. or *Note `SET': set. value in the
`RETURNS' clause, but the *Note `RETURN': return. statement returns an
integer, the value returned from the function is the string for the
corresponding *Note `ENUM': enum. member of set of *Note `SET': set.
members.

The following example function takes a parameter, performs an operation
using an SQL function, and returns the result. In this case, it is
unnecessary to use `delimiter' because the function definition contains
no internal `;' statement delimiters:

     mysql> CREATE FUNCTION hello (s CHAR(20))
     mysql> RETURNS CHAR(50) DETERMINISTIC
         -> RETURN CONCAT('Hello, ',s,'!');
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT hello('world');
     +----------------+
     | hello('world') |
     +----------------+
     | Hello, world!  |
     +----------------+
     1 row in set (0.00 sec)

Parameter types and function return types can be declared to use any
valid data type, except that the `COLLATE' attribute cannot be used
prior to MySQL 5.5.3. As of 5.5.3, `COLLATE' can be used if preceded by
the `CHARACTER SET' attribute.

The ROUTINE_BODY consists of a valid SQL routine statement. This can be
a simple statement such as *Note `SELECT': select. or *Note `INSERT':
insert, or a compound statement written using `BEGIN' and `END'.
Compound statements can contain declarations, loops, and other control
structure statements. The syntax for these statements is described in
*Note sql-syntax-compound-statements::.

MySQL permits routines to contain DDL statements, such as `CREATE' and
`DROP'. MySQL also permits stored procedures (but not stored functions)
to contain SQL transaction statements such as *Note `COMMIT': commit.
Stored functions may not contain statements that perform explicit or
implicit commit or rollback. Support for these statements is not
required by the SQL standard, which states that each DBMS vendor may
decide whether to permit them.

Statements that return a result set can be used within a stored
procedure but not within a stored function. This prohibition includes
*Note `SELECT': select. statements that do not have an `INTO VAR_LIST'
clause and other statements such as *Note `SHOW': show, *Note
`EXPLAIN': explain, and *Note `CHECK TABLE': check-table. For
statements that can be determined at function definition time to return
a result set, a `Not allowed to return a result set from a function'
error occurs (`ER_SP_NO_RETSET'). For statements that can be determined
only at runtime to return a result set, a `PROCEDURE %s can't return a
result set in the given context' error occurs (`ER_SP_BADSELECT').

*Note `USE': use. statements within stored routines are not permitted.
When a routine is invoked, an implicit `USE DB_NAME' is performed (and
undone when the routine terminates). The causes the routine to have the
given default database while it executes.  References to objects in
databases other than the routine default database should be qualified
with the appropriate database name.

For additional information about statements that are not permitted in
stored routines, see *Note stored-program-restrictions::.

For information about invoking stored procedures from within programs
written in a language that has a MySQL interface, see *Note call::.

MySQL stores the `sql_mode' system variable setting in effect when a
routine is created or altered, and always executes the routine with
this setting in force, _regardless of the current server SQL mode when
the routine begins executing_.

The switch from the SQL mode of the invoker to that of the routine
occurs after evaluation of arguments and assignment of the resulting
values to routine parameters. If you define a routine in strict SQL
mode but invoke it in nonstrict mode, assignment of arguments to
routine parameters does not take place in strict mode. If you require
that expressions passed to a routine be assigned in strict SQL mode,
you should invoke the routine with strict mode in effect.

The `COMMENT' characteristic is a MySQL extension, and may be used to
describe the stored routine. This information is displayed by the *Note
`SHOW CREATE PROCEDURE': show-create-procedure. and *Note `SHOW CREATE
FUNCTION': show-create-function. statements.

The `LANGUAGE' characteristic indicates the language in which the
routine is written. The server ignores this characteristic; only SQL
routines are supported.

A routine is considered `deterministic' if it always produces the same
result for the same input parameters, and `not deterministic'
otherwise. If neither `DETERMINISTIC' nor `NOT DETERMINISTIC' is given
in the routine definition, the default is `NOT DETERMINISTIC'. To
declare that a function is deterministic, you must specify
`DETERMINISTIC' explicitly.

Assessment of the nature of a routine is based on the `honesty' of the
creator: MySQL does not check that a routine declared `DETERMINISTIC'
is free of statements that produce nondeterministic results. However,
misdeclaring a routine might affect results or affect performance.
Declaring a nondeterministic routine as `DETERMINISTIC' might lead to
unexpected results by causing the optimizer to make incorrect execution
plan choices.  Declaring a deterministic routine as `NONDETERMINISTIC'
might diminish performance by causing available optimizations not to be
used.

If binary logging is enabled, the `DETERMINISTIC' characteristic
affects which routine definitions MySQL accepts.  See *Note
stored-programs-logging::.

A routine that contains the `NOW()' function (or its synonyms) or
`RAND()' is nondeterministic, but it might still be replication-safe.
For `NOW()', the binary log includes the timestamp and replicates
correctly.  `RAND()' also replicates correctly as long as it is called
only a single time during the execution of a routine. (You can consider
the routine execution timestamp and random number seed as implicit
inputs that are identical on the master and slave.)

Several characteristics provide information about the nature of data
use by the routine. In MySQL, these characteristics are advisory only.
The server does not use them to constrain what kinds of statements a
routine will be permitted to execute.

   * `CONTAINS SQL' indicates that the routine does not contain
     statements that read or write data. This is the default if none of
     these characteristics is given explicitly. Examples of such
     statements are `SET @x = 1' or `DO RELEASE_LOCK('abc')', which
     execute but neither read nor write data.

   * `NO SQL' indicates that the routine contains no SQL statements.

   * `READS SQL DATA' indicates that the routine contains statements
     that read data (for example, *Note `SELECT': select.), but not
     statements that write data.

   * `MODIFIES SQL DATA' indicates that the routine contains statements
     that may write data (for example, *Note `INSERT': insert. or *Note
     `DELETE': delete.).

The `SQL SECURITY' characteristic can be `DEFINER' or `INVOKER' to
specify the security context; that is, whether the routine executes
using the privileges of the account named in the routine `DEFINER'
clause or the user who invokes it. This account must have permission to
access the database with which the routine is associated. The default
value is `DEFINER'. The user who invokes the routine must have the
`EXECUTE' privilege for it, as must the `DEFINER' account if the routine
executes in definer security context.

The `DEFINER' clause specifies the MySQL account to be used when
checking access privileges at routine execution time for routines that
have the `SQL SECURITY DEFINER' characteristic.

If a USER value is given for the `DEFINER' clause, it should be a MySQL
account specified as `'USER_NAME'@'HOST_NAME'' (the same format used in
the *Note `GRANT': grant.  statement), `CURRENT_USER', or
`CURRENT_USER()'. The default `DEFINER' value is the user who executes
the *Note `CREATE PROCEDURE': create-procedure. or *Note `CREATE
FUNCTION': create-function. or statement. This is the same as
specifying `DEFINER = CURRENT_USER' explicitly.

If you specify the `DEFINER' clause, these rules determine the valid
`DEFINER' user values:

   * If you do not have the `SUPER' privilege, the only permitted USER
     value is your own account, either specified literally or by using
     `CURRENT_USER'. You cannot set the definer to some other account.

   * If you have the `SUPER' privilege, you can specify any
     syntactically valid account name. If the account does not actually
     exist, a warning is generated.

   * Although it is possible to create a routine with a nonexistent
     `DEFINER' account, an error occurs at routine execution time if
     the `SQL SECURITY' value is `DEFINER' but the definer account does
     not exist.

For more information about stored routine security, see *Note
stored-programs-security::.

Within a stored routine that is defined with the `SQL SECURITY DEFINER'
characteristic, `CURRENT_USER' returns the routine's `DEFINER' value.
For information about user auditing within stored routines, see *Note
account-activity-auditing::.

Consider the following procedure, which displays a count of the number
of MySQL accounts listed in the `mysql.user' table:

     CREATE DEFINER = 'admin'@'localhost' PROCEDURE account_count()
     BEGIN
       SELECT 'Number of accounts:', COUNT(*) FROM mysql.user;
     END;

The procedure is assigned a `DEFINER' account of `'admin'@'localhost''
no matter which user defines it. It executes with the privileges of
that account no matter which user invokes it (because the default
security characteristic is `DEFINER'). The procedure succeeds or fails
depending on whether invoker has the `EXECUTE' privilege for it and
`'admin'@'localhost'' has the `SELECT' privilege for the `mysql.user'
table.

Now suppose that the procedure is defined with the `SQL SECURITY
INVOKER' characteristic:

     CREATE DEFINER = 'admin'@'localhost' PROCEDURE account_count()
     SQL SECURITY INVOKER
     BEGIN
       SELECT 'Number of accounts:', COUNT(*) FROM mysql.user;
     END;

The procedure still has a `DEFINER' of `'admin'@'localhost'', but in
this case, it executes with the privileges of the invoking user. Thus,
the procedure succeeds or fails depending on whether the invoker has
the `EXECUTE' privilege for it and the `SELECT' privilege for the
`mysql.user' table.

The server handles the data type of a routine parameter, local routine
variable created with *Note `DECLARE': declare, or function return value
as follows:

   * Assignments are checked for data type mismatches and overflow.
     Conversion and overflow problems result in warnings, or errors in
     strict SQL mode.

   * Only scalar values can be assigned. For example, a statement such
     as `SET x = (SELECT 1, 2)' is invalid.

   * For character data types, if there is a `CHARACTER SET' attribute
     in the declaration, the specified character set and its default
     collation is used. If the `COLLATE' attribute is also present, that
     collation is used rather than the default collation. If there is
     no `CHARACTER SET' attribute, the database character set and
     collation in effect at routine creation time are used. (The
     database character set and collation are given by the value of the
     `character_set_database' and `collation_database' system
     variables.)

     Prior to MySQL 5.5.3, if there is a `CHARACTER SET' attribute in
     the declaration, the `COLLATE' attribute is not supported, and the
     character set's default collation is used. (This includes use of
     `BINARY', which in this context specifies the binary collation of
     the character set.) If there is no `CHARACTER SET' attribute, the
     database character set and its default collation (rather than the
     database collation) are used.

     If you change the database default character set or collation,
     stored routines that use the database defaults must be dropped and
     recreated so that they use the new defaults.


File: manual.info,  Node: create-server,  Next: create-table,  Prev: create-procedure,  Up: sql-syntax-data-definition

13.1.16 `CREATE SERVER' Syntax
------------------------------

     CREATE SERVER SERVER_NAME
         FOREIGN DATA WRAPPER WRAPPER_NAME
         OPTIONS (OPTION [, OPTION] ...)

     OPTION:
       { HOST CHARACTER-LITERAL
       | DATABASE CHARACTER-LITERAL
       | USER CHARACTER-LITERAL
       | PASSWORD CHARACTER-LITERAL
       | SOCKET CHARACTER-LITERAL
       | OWNER CHARACTER-LITERAL
       | PORT NUMERIC-LITERAL }

This statement creates the definition of a server for use with the
`FEDERATED' storage engine. The `CREATE SERVER' statement creates a new
row in the `servers' table in the `mysql' database. This statement
requires the `SUPER' privilege.

The `SERVER_NAME' should be a unique reference to the server. Server
definitions are global within the scope of the server, it is not
possible to qualify the server definition to a specific database.
`SERVER_NAME' has a maximum length of 64 characters (names longer than
64 characters are silently truncated), and is case insensitive. You may
specify the name as a quoted string.

The `WRAPPER_NAME' should be `mysql', and may be quoted with single
quotation marks. Other values for `WRAPPER_NAME' are not currently
supported.

For each `OPTION' you must specify either a character literal or
numeric literal.  Character literals are UTF-8, support a maximum
length of 64 characters and default to a blank (empty) string. String
literals are silently truncated to 64 characters. Numeric literals must
be a number between 0 and 9999, default value is 0.

*Note*:

The `OWNER' option is currently not applied, and has no effect on the
ownership or operation of the server connection that is created.

The `CREATE SERVER' statement creates an entry in the `mysql.servers'
table that can later be used with the *Note `CREATE TABLE':
create-table. statement when creating a `FEDERATED' table. The options
that you specify will be used to populate the columns in the
`mysql.servers' table. The table columns are `Server_name', `Host',
`Db', `Username', `Password', `Port' and `Socket'.

For example:

     CREATE SERVER s
     FOREIGN DATA WRAPPER mysql
     OPTIONS (USER 'Remote', HOST '192.168.1.106', DATABASE 'test');

Be sure to specify all options necessary to establish a connection to
the server. The user name, host name, and database name are mandatory.
Other options might be required as well, such as password.

The data stored in the table can be used when creating a connection to
a `FEDERATED' table:

     CREATE TABLE t (s1 INT) ENGINE=FEDERATED CONNECTION='s';

For more information, see *Note federated-storage-engine::.

*Note `CREATE SERVER': create-server. causes an implicit commit.

In MySQL 5.5, `CREATE SERVER' is not written to the binary log,
regardless of the logging format that is in use.


File: manual.info,  Node: create-table,  Next: create-tablespace,  Prev: create-server,  Up: sql-syntax-data-definition

13.1.17 `CREATE TABLE' Syntax
-----------------------------

* Menu:

* create-table-select::          `CREATE TABLE ... SELECT' Syntax
* create-table-foreign-keys::    Using `FOREIGN KEY' Constraints
* silent-column-changes::        Silent Column Specification Changes

     CREATE [TEMPORARY] TABLE [IF NOT EXISTS] TBL_NAME
         (CREATE_DEFINITION,...)
         [TABLE_OPTIONS]
         [PARTITION_OPTIONS]

Or:

     CREATE [TEMPORARY] TABLE [IF NOT EXISTS] TBL_NAME
         [(CREATE_DEFINITION,...)]
         [TABLE_OPTIONS]
         [PARTITION_OPTIONS]
         SELECT_STATEMENT

Or:

     CREATE [TEMPORARY] TABLE [IF NOT EXISTS] TBL_NAME
         { LIKE OLD_TBL_NAME | (LIKE OLD_TBL_NAME) }

     CREATE_DEFINITION:
         COL_NAME COLUMN_DEFINITION
       | [CONSTRAINT [SYMBOL]] PRIMARY KEY [INDEX_TYPE] (INDEX_COL_NAME,...)
           [INDEX_OPTION] ...
       | {INDEX|KEY} [INDEX_NAME] [INDEX_TYPE] (INDEX_COL_NAME,...)
           [INDEX_OPTION] ...
       | [CONSTRAINT [SYMBOL]] UNIQUE [INDEX|KEY]
           [INDEX_NAME] [INDEX_TYPE] (INDEX_COL_NAME,...)
           [INDEX_OPTION] ...
       | {FULLTEXT|SPATIAL} [INDEX|KEY] [INDEX_NAME] (INDEX_COL_NAME,...)
           [INDEX_OPTION] ...
       | [CONSTRAINT [SYMBOL]] FOREIGN KEY
           [INDEX_NAME] (INDEX_COL_NAME,...) REFERENCE_DEFINITION
       | CHECK (EXPR)

     COLUMN_DEFINITION:
         DATA_TYPE [NOT NULL | NULL] [DEFAULT DEFAULT_VALUE]
           [AUTO_INCREMENT] [UNIQUE [KEY] | [PRIMARY] KEY]
           [COMMENT 'STRING']
           [COLUMN_FORMAT {FIXED|DYNAMIC|DEFAULT}]
           [STORAGE {DISK|MEMORY|DEFAULT}]
           [REFERENCE_DEFINITION]

     DATA_TYPE:
         BIT[(LENGTH)]
       | TINYINT[(LENGTH)] [UNSIGNED] [ZEROFILL]
       | SMALLINT[(LENGTH)] [UNSIGNED] [ZEROFILL]
       | MEDIUMINT[(LENGTH)] [UNSIGNED] [ZEROFILL]
       | INT[(LENGTH)] [UNSIGNED] [ZEROFILL]
       | INTEGER[(LENGTH)] [UNSIGNED] [ZEROFILL]
       | BIGINT[(LENGTH)] [UNSIGNED] [ZEROFILL]
       | REAL[(LENGTH,DECIMALS)] [UNSIGNED] [ZEROFILL]
       | DOUBLE[(LENGTH,DECIMALS)] [UNSIGNED] [ZEROFILL]
       | FLOAT[(LENGTH,DECIMALS)] [UNSIGNED] [ZEROFILL]
       | DECIMAL[(LENGTH[,DECIMALS])] [UNSIGNED] [ZEROFILL]
       | NUMERIC[(LENGTH[,DECIMALS])] [UNSIGNED] [ZEROFILL]
       | DATE
       | TIME
       | TIMESTAMP
       | DATETIME
       | YEAR
       | CHAR[(LENGTH)]
           [CHARACTER SET CHARSET_NAME] [COLLATE COLLATION_NAME]
       | VARCHAR(LENGTH)
           [CHARACTER SET CHARSET_NAME] [COLLATE COLLATION_NAME]
       | BINARY[(LENGTH)]
       | VARBINARY(LENGTH)
       | TINYBLOB
       | BLOB
       | MEDIUMBLOB
       | LONGBLOB
       | TINYTEXT [BINARY]
           [CHARACTER SET CHARSET_NAME] [COLLATE COLLATION_NAME]
       | TEXT [BINARY]
           [CHARACTER SET CHARSET_NAME] [COLLATE COLLATION_NAME]
       | MEDIUMTEXT [BINARY]
           [CHARACTER SET CHARSET_NAME] [COLLATE COLLATION_NAME]
       | LONGTEXT [BINARY]
           [CHARACTER SET CHARSET_NAME] [COLLATE COLLATION_NAME]
       | ENUM(VALUE1,VALUE2,VALUE3,...)
           [CHARACTER SET CHARSET_NAME] [COLLATE COLLATION_NAME]
       | SET(VALUE1,VALUE2,VALUE3,...)
           [CHARACTER SET CHARSET_NAME] [COLLATE COLLATION_NAME]
       | SPATIAL_TYPE

     INDEX_COL_NAME:
         COL_NAME [(LENGTH)] [ASC | DESC]

     INDEX_TYPE:
         USING {BTREE | HASH}

     INDEX_OPTION:
         KEY_BLOCK_SIZE [=] VALUE
       | INDEX_TYPE
       | WITH PARSER PARSER_NAME
       | COMMENT 'STRING'

     REFERENCE_DEFINITION:
         REFERENCES TBL_NAME (INDEX_COL_NAME,...)
           [MATCH FULL | MATCH PARTIAL | MATCH SIMPLE]
           [ON DELETE REFERENCE_OPTION]
           [ON UPDATE REFERENCE_OPTION]

     REFERENCE_OPTION:
         RESTRICT | CASCADE | SET NULL | NO ACTION

     TABLE_OPTIONS:
         TABLE_OPTION [[,] TABLE_OPTION] ...

     TABLE_OPTION:
         ENGINE [=] ENGINE_NAME
       | AUTO_INCREMENT [=] VALUE
       | AVG_ROW_LENGTH [=] VALUE
       | [DEFAULT] CHARACTER SET [=] CHARSET_NAME
       | CHECKSUM [=] {0 | 1}
       | [DEFAULT] COLLATE [=] COLLATION_NAME
       | COMMENT [=] 'STRING'
       | CONNECTION [=] 'CONNECT_STRING'
       | DATA DIRECTORY [=] 'ABSOLUTE PATH TO DIRECTORY'
       | DELAY_KEY_WRITE [=] {0 | 1}
       | INDEX DIRECTORY [=] 'ABSOLUTE PATH TO DIRECTORY'
       | INSERT_METHOD [=] { NO | FIRST | LAST }
       | KEY_BLOCK_SIZE [=] VALUE
       | MAX_ROWS [=] VALUE
       | MIN_ROWS [=] VALUE
       | PACK_KEYS [=] {0 | 1 | DEFAULT}
       | PASSWORD [=] 'STRING'
       | ROW_FORMAT [=] {DEFAULT|DYNAMIC|FIXED|COMPRESSED|REDUNDANT|COMPACT}
       | TABLESPACE TABLESPACE_NAME [STORAGE {DISK|MEMORY|DEFAULT}]
       | UNION [=] (TBL_NAME[,TBL_NAME]...)

     PARTITION_OPTIONS:
         PARTITION BY
             { [LINEAR] HASH(EXPR)
             | [LINEAR] KEY [ALGORITHM={1|2}] (COLUMN_LIST)
             | RANGE{(EXPR) | COLUMNS(COLUMN_LIST)}
             | LIST{(EXPR) | COLUMNS(COLUMN_LIST)} }
         [PARTITIONS NUM]
         [SUBPARTITION BY
             { [LINEAR] HASH(EXPR)
             | [LINEAR] KEY [ALGORITHM={1|2}] (COLUMN_LIST) }
           [SUBPARTITIONS NUM]
         ]
         [(PARTITION_DEFINITION [, PARTITION_DEFINITION] ...)]

     PARTITION_DEFINITION:
         PARTITION PARTITION_NAME
             [VALUES
                 {LESS THAN {(EXPR | VALUE_LIST) | `MAXVALUE'}
                 |
                 IN (VALUE_LIST)}]
             [[STORAGE] ENGINE [=] ENGINE_NAME]
             [COMMENT [=] 'COMMENT_TEXT' ]
             [DATA DIRECTORY [=] '`DATA_DIR'']
             [INDEX DIRECTORY [=] '`INDEX_DIR'']
             [MAX_ROWS [=] MAX_NUMBER_OF_ROWS]
             [MIN_ROWS [=] MIN_NUMBER_OF_ROWS]
             [TABLESPACE [=] TABLESPACE_NAME]
             [NODEGROUP [=] NODE_GROUP_ID]
             [(SUBPARTITION_DEFINITION [, SUBPARTITION_DEFINITION] ...)]

     SUBPARTITION_DEFINITION:
         SUBPARTITION LOGICAL_NAME
             [[STORAGE] ENGINE [=] ENGINE_NAME]
             [COMMENT [=] 'COMMENT_TEXT' ]
             [DATA DIRECTORY [=] '`DATA_DIR'']
             [INDEX DIRECTORY [=] '`INDEX_DIR'']
             [MAX_ROWS [=] MAX_NUMBER_OF_ROWS]
             [MIN_ROWS [=] MIN_NUMBER_OF_ROWS]
             [TABLESPACE [=] TABLESPACE_NAME]
             [NODEGROUP [=] NODE_GROUP_ID]

     SELECT_STATEMENT:
         [IGNORE | REPLACE] [AS] SELECT ...   (SOME VALID SELECT STATEMENT)

*Note `CREATE TABLE': create-table. creates a table with the given
name. You must have the `CREATE' privilege for the table.

Rules for permissible table names are given in *Note identifiers::. By
default, the table is created in the default database, using the *Note
`InnoDB': innodb-storage-engine. storage engine. An error occurs if the
table exists, if there is no default database, or if the database does
not exist.

The table name can be specified as DB_NAME.TBL_NAME to create the table
in a specific database. This works regardless of whether there is a
default database, assuming that the database exists. If you use quoted
identifiers, quote the database and table names separately.  For
example, write ``mydb`.`mytbl`', not ``mydb.mytbl`'.

* Temporary Tables *

You can use the `TEMPORARY' keyword when creating a table. A
`TEMPORARY' table is visible only to the current connection, and is
dropped automatically when the connection is closed. This means that
two different connections can use the same temporary table name without
conflicting with each other or with an existing non-`TEMPORARY' table
of the same name. (The existing table is hidden until the temporary
table is dropped.) To create temporary tables, you must have the
`CREATE TEMPORARY TABLES' privilege.

*Note*:

*Note `CREATE TABLE': create-table. does not automatically commit the
current active transaction if you use the `TEMPORARY' keyword.

* Existing Table with Same Name *

The keywords `IF NOT EXISTS' prevent an error from occurring if the
table exists. However, there is no verification that the existing table
has a structure identical to that indicated by the *Note `CREATE
TABLE': create-table.  statement.

* Physical Representation *

MySQL represents each table by an `.frm' table format (definition) file
in the database directory. The storage engine for the table might
create other files as well.

For `InnoDB' tables, the file storage is controlled by the
`innodb_file_per_table' configuration option. When this option is
turned off, all `InnoDB' tables and indexes are stored in the system
tablespace, represented by one or more .ibd files. For each `InnoDB'
table created when this option is turned on, the table data and all
associated indexes are stored in a .ibd file located inside the
database directory.

For `MyISAM' tables, the storage engine creates data and index files.
Thus, for each `MyISAM' table TBL_NAME, there are three disk files.

This table describes the purpose of `MyISAM' table TBL_NAME disk files.

File                   Purpose
`TBL_NAME.frm'         Table format (definition) file
`TBL_NAME.MYD'         Data file
`TBL_NAME.MYI'         Index file

*Note storage-engines::, describes what files each storage engine
creates to represent tables. If a table name contains special
characters, the names for the table files contain encoded versions of
those characters as described in *Note identifier-mapping::.

* Data Types and Attributes for Columns *

DATA_TYPE represents the data type in a column definition. SPATIAL_TYPE
represents a spatial data type. The data type syntax shown is
representative only. For a full description of the syntax available for
specifying column data types, as well as information about the
properties of each type, see *Note data-types::, and *Note
spatial-extensions::.

Some attributes do not apply to all data types.  `AUTO_INCREMENT'
applies only to integer and floating-point types. `DEFAULT' does not
apply to the *Note `BLOB': blob. or *Note `TEXT': blob. types.

   * If neither `NULL' nor `NOT NULL' is specified, the column is
     treated as though `NULL' had been specified.

   * An integer or floating-point column can have the additional
     attribute `AUTO_INCREMENT'. When you insert a value of `NULL'
     (recommended) or `0' into an indexed `AUTO_INCREMENT' column, the
     column is set to the next sequence value. Typically this is
     `VALUE+1', where VALUE is the largest value for the column
     currently in the table.  `AUTO_INCREMENT' sequences begin with `1'.

     To retrieve an `AUTO_INCREMENT' value after inserting a row, use
     the `LAST_INSERT_ID()' SQL function or the *Note
     `mysql_insert_id()': mysql-insert-id. C API function. See *Note
     information-functions::, and *Note mysql-insert-id::.

     If the `NO_AUTO_VALUE_ON_ZERO' SQL mode is enabled, you can store
     `0' in `AUTO_INCREMENT' columns as `0' without generating a new
     sequence value.  See *Note server-sql-mode::.

     *Note*:

     There can be only one `AUTO_INCREMENT' column per table, it must
     be indexed, and it cannot have a `DEFAULT' value. An
     `AUTO_INCREMENT' column works properly only if it contains only
     positive values. Inserting a negative number is regarded as
     inserting a very large positive number. This is done to avoid
     precision problems when numbers `wrap' over from positive to
     negative and also to ensure that you do not accidentally get an
     `AUTO_INCREMENT' column that contains `0'.

     For `MyISAM' tables, you can specify an `AUTO_INCREMENT' secondary
     column in a multiple-column key. See *Note
     example-auto-increment::.

     To make MySQL compatible with some ODBC applications, you can find
     the `AUTO_INCREMENT' value for the last inserted row with the
     following query:

          SELECT * FROM TBL_NAME WHERE AUTO_COL IS NULL

     For information about `InnoDB' and `AUTO_INCREMENT', see *Note
     innodb-auto-increment-handling::. For information about
     `AUTO_INCREMENT' and MySQL Replication, see *Note
     replication-features-auto-increment::.

   * Character data types (*Note `CHAR': char, *Note `VARCHAR': char,
     *Note `TEXT': blob.) can include `CHARACTER SET' and `COLLATE'
     attributes to specify the character set and collation for the
     column. For details, see *Note charset::. `CHARSET' is a synonym
     for `CHARACTER SET'. Example:

          CREATE TABLE t (c CHAR(20) CHARACTER SET utf8 COLLATE utf8_bin);

     MySQL 5.5 interprets length specifications in character column
     definitions in characters. (Versions before MySQL 4.1 interpreted
     them in bytes.) Lengths for *Note `BINARY': binary-varbinary. and
     *Note `VARBINARY': binary-varbinary. are in bytes.

   * The `DEFAULT' clause specifies a default value for a column. With
     one exception, the default value must be a constant; it cannot be
     a function or an expression. This means, for example, that you
     cannot set the default for a date column to be the value of a
     function such as `NOW()' or `CURRENT_DATE'. The exception is that
     you can specify `CURRENT_TIMESTAMP' as the default for a *Note
     `TIMESTAMP': datetime. column.  See *Note
     timestamp-initialization::.

     If a column definition includes no explicit `DEFAULT' value, MySQL
     determines the default value as described in *Note
     data-type-defaults::.

     *Note `BLOB': blob. and *Note `TEXT': blob. columns cannot be
     assigned a default value.

     *Note `CREATE TABLE': create-table. fails if a date-valued default
     is not correct according to the `NO_ZERO_IN_DATE' SQL mode, even
     if strict SQL mode is not enabled. For example, `c1 DATE DEFAULT
     '2010-00-00'' causes *Note `CREATE TABLE': create-table. to fail
     with `Invalid default value for 'c1''.

   * A comment for a column can be specified with the `COMMENT' option,
     up to 1024 characters long (255 characters before MySQL 5.5.3).
     The comment is displayed by the *Note `SHOW CREATE TABLE':
     show-create-table. and *Note `SHOW FULL COLUMNS': show-columns.
     statements.

   * In MySQL Cluster, it is also possible to specify a data storage
     format for individual columns of *Note `NDB': mysql-cluster.
     tables using `COLUMN_FORMAT'. Permissible column formats are
     `FIXED', `DYNAMIC', and `DEFAULT'. `FIXED' is used to specify
     fixed-width storage, `DYNAMIC' permits the column to be
     variable-width, and `DEFAULT' causes the column to use fixed-width
     or variable-width storage as determined by the column's data type
     (possibly overridden by a `ROW_FORMAT' specifier).

     For *Note `NDB': mysql-cluster. tables, the default value for
     `COLUMN_FORMAT' is `DEFAULT'.

     `COLUMN_FORMAT' currently has no effect on columns of tables using
     storage engines other than *Note `NDB': mysql-cluster. The
     `COLUMN_FORMAT' keyword is supported only in the build of *Note
     `mysqld': mysqld. that is supplied with MySQL Cluster; it is not
     recognized in any other version of MySQL, where attempting to use
     `COLUMN_FORMAT' causes a syntax error.

   * For *Note `NDB': mysql-cluster. tables, it is also possible to
     specify whether the column is stored on disk or in memory by using
     a `STORAGE' clause.  `STORAGE DISK' causes the column to be stored
     on disk, and `STORAGE MEMORY' causes in-memory storage to be used.
     The *Note `CREATE TABLE': create-table. statement used must still
     include a `TABLESPACE' clause:

          mysql> CREATE TABLE t1 (
              ->     c1 INT STORAGE DISK,
              ->     c2 INT STORAGE MEMORY
              -> ) ENGINE NDB;
          `ERROR 1005 (HY000): Can't create table 'c.t1' (errno: 140)'

          mysql> CREATE TABLE t1 (
              ->     c1 INT STORAGE DISK,
              ->     c2 INT STORAGE MEMORY
              -> ) TABLESPACE ts_1 ENGINE NDB;
          Query OK, 0 rows affected (1.06 sec)

     For *Note `NDB': mysql-cluster. tables, `STORAGE DEFAULT' is
     equivalent to `STORAGE MEMORY'.

     The `STORAGE' clause has no effect on tables using storage engines
     other than *Note `NDB': mysql-cluster. The `STORAGE' keyword is
     supported only in the build of *Note `mysqld': mysqld. that is
     supplied with MySQL Cluster; it is not recognized in any other
     version of MySQL, where any attempt to use the `STORAGE' keyword
     causes a syntax error.

   * `KEY' is normally a synonym for `INDEX'. The key attribute `PRIMARY
     KEY' can also be specified as just `KEY' when given in a column
     definition. This was implemented for compatibility with other
     database systems.

   * A `UNIQUE' index creates a constraint such that all values in the
     index must be distinct. An error occurs if you try to add a new
     row with a key value that matches an existing row. For all
     engines, a `UNIQUE' index permits multiple `NULL' values for
     columns that can contain `NULL'.

   * A `PRIMARY KEY' is a unique index where all key columns must be
     defined as `NOT NULL'. If they are not explicitly declared as `NOT
     NULL', MySQL declares them so implicitly (and silently). A table
     can have only one `PRIMARY KEY'. The name of a `PRIMARY KEY' is
     always `PRIMARY', which thus cannot be used as the name for any
     other kind of index.

     If you do not have a `PRIMARY KEY' and an application asks for the
     `PRIMARY KEY' in your tables, MySQL returns the first `UNIQUE'
     index that has no `NULL' columns as the `PRIMARY KEY'.

     In `InnoDB' tables, keep the `PRIMARY KEY' short to minimize
     storage overhead for secondary indexes. Each secondary index entry
     contains a copy of the primary key columns for the corresponding
     row. (See *Note innodb-table-and-index::.)

   * In the created table, a `PRIMARY KEY' is placed first, followed by
     all `UNIQUE' indexes, and then the nonunique indexes. This helps
     the MySQL optimizer to prioritize which index to use and also more
     quickly to detect duplicated `UNIQUE' keys.

   * A `PRIMARY KEY' can be a multiple-column index. However, you
     cannot create a multiple-column index using the `PRIMARY KEY' key
     attribute in a column specification. Doing so only marks that
     single column as primary. You must use a separate `PRIMARY
     KEY(INDEX_COL_NAME, ...)' clause.

   * If a `PRIMARY KEY' or `UNIQUE' index consists of only one column
     that has an integer type, you can also refer to the column as
     `_rowid' in *Note `SELECT': select. statements.

   * In MySQL, the name of a `PRIMARY KEY' is `PRIMARY'. For other
     indexes, if you do not assign a name, the index is assigned the
     same name as the first indexed column, with an optional suffix
     (`_2', `_3', `...') to make it unique. You can see index names for
     a table using `SHOW INDEX FROM TBL_NAME'. See *Note show-index::.

   * Some storage engines permit you to specify an index type when
     creating an index. The syntax for the INDEX_TYPE specifier is
     `USING TYPE_NAME'.

     Example:

          CREATE TABLE lookup
            (id INT, INDEX USING BTREE (id))
            ENGINE = MEMORY;

     The preferred position for `USING' is after the index column list.
     It can be given before the column list, but support for use of the
     option in that position is deprecated and will be removed in a
     future MySQL release.

     INDEX_OPTION values specify additional options for an index.
     `USING' is one such option. For details about permissible
     INDEX_OPTION values, see *Note create-index::.

     For more information about indexes, see *Note mysql-indexes::.

   * In MySQL 5.5, only the `InnoDB', `MyISAM', and `MEMORY' storage
     engines support indexes on columns that can have `NULL' values. In
     other cases, you must declare indexed columns as `NOT NULL' or an
     error results.

   * For *Note `CHAR': char, *Note `VARCHAR': char, *Note `BINARY':
     binary-varbinary, and *Note `VARBINARY': binary-varbinary.
     columns, indexes can be created that use only the leading part of
     column values, using `COL_NAME(LENGTH)' syntax to specify an index
     prefix length.  *Note `BLOB': blob. and *Note `TEXT': blob.
     columns also can be indexed, but a prefix length _must_ be given.
     Prefix lengths are given in characters for nonbinary string types
     and in bytes for binary string types. That is, index entries
     consist of the first LENGTH characters of each column value for
     *Note `CHAR': char, *Note `VARCHAR': char, and *Note `TEXT': blob.
     columns, and the first LENGTH bytes of each column value for *Note
     `BINARY': binary-varbinary, *Note `VARBINARY': binary-varbinary,
     and *Note `BLOB': blob. columns. Indexing only a prefix of column
     values like this can make the index file much smaller. See *Note
     column-indexes::.

     Only the `InnoDB' and `MyISAM' storage engines support indexing on
     *Note `BLOB': blob. and *Note `TEXT': blob. columns. For example:

          CREATE TABLE test (blob_col BLOB, INDEX(blob_col(10)));

     Prefixes can be up to 1000 bytes long (767 bytes for `InnoDB'
     tables). Note that prefix limits are measured in bytes, whereas
     the prefix length in *Note `CREATE TABLE': create-table.
     statements is interpreted as number of characters for nonbinary
     data types (*Note `CHAR': char, *Note `VARCHAR': char, *Note
     `TEXT': blob.). Take this into account when specifying a prefix
     length for a column that uses a multi-byte character set.

   * An INDEX_COL_NAME specification can end with `ASC' or `DESC'.
     These keywords are permitted for future extensions for specifying
     ascending or descending index value storage.  Currently, they are
     parsed but ignored; index values are always stored in ascending
     order.

   * When you use `ORDER BY' or `GROUP BY' on a column in a *Note
     `SELECT': select, the server sorts values using only the initial
     number of bytes indicated by the `max_sort_length' system variable.

   * You can create special `FULLTEXT' indexes, which are used for
     full-text searches. Only the `MyISAM' storage engine supports
     `FULLTEXT' indexes. They can be created only from *Note `CHAR':
     char, *Note `VARCHAR': char, and *Note `TEXT': blob. columns.
     Indexing always happens over the entire column; column prefix
     indexing is not supported and any prefix length is ignored if
     specified. See *Note fulltext-search::, for details of operation. A
     `WITH PARSER' clause can be specified as an INDEX_OPTION value to
     associate a parser plugin with the index if full-text indexing and
     searching operations need special handling. This clause is valid
     only for `FULLTEXT' indexes. See *Note plugin-api::, for details
     on creating plugins.

   * You can create `SPATIAL' indexes on spatial data types. Spatial
     types are supported only for `MyISAM' tables and indexed columns
     must be declared as `NOT NULL'. See *Note spatial-extensions::.

   * As of MySQL 5.5.3, index definitions can include an optional
     comment of up to 1024 characters.

   * *Note `InnoDB': innodb-storage-engine. tables support checking of
     foreign key constraints. The columns of the referenced table must
     always be explicitly named. Both `ON DELETE' and `ON UPDATE'
     actions on foreign keys. For more detailed information and
     examples, see *Note create-table-foreign-keys::. For information
     specific to foreign keys in `InnoDB', see *Note
     innodb-foreign-key-constraints::.

     For other storage engines, MySQL Server parses and ignores the
     `FOREIGN KEY' and `REFERENCES' syntax in *Note `CREATE TABLE':
     create-table. statements. The `CHECK' clause is parsed but ignored
     by all storage engines. See *Note ansi-diff-foreign-keys::.

     *Important*:

     For users familiar with the ANSI/ISO SQL Standard, please note
     that no storage engine, including `InnoDB', recognizes or enforces
     the `MATCH' clause used in referential integrity constraint
     definitions. Use of an explicit `MATCH' clause will not have the
     specified effect, and also causes `ON DELETE' and `ON UPDATE'
     clauses to be ignored. For these reasons, specifying `MATCH'
     should be avoided.

     The `MATCH' clause in the SQL standard controls how `NULL' values
     in a composite (multiple-column) foreign key are handled when
     comparing to a primary key. `InnoDB' essentially implements the
     semantics defined by `MATCH SIMPLE', which permit a foreign key to
     be all or partially `NULL'. In that case, the (child table) row
     containing such a foreign key is permitted to be inserted, and
     does not match any row in the referenced (parent) table. It is
     possible to implement other semantics using triggers.

     Additionally, MySQL requires that the referenced columns be
     indexed for performance. However, `InnoDB' does not enforce any
     requirement that the referenced columns be declared `UNIQUE' or
     `NOT NULL'. The handling of foreign key references to nonunique
     keys or keys that contain `NULL' values is not well defined for
     operations such as `UPDATE' or `DELETE CASCADE'. You are advised
     to use foreign keys that reference only keys that are both `UNIQUE'
     (or `PRIMARY') and `NOT NULL'.

     MySQL does not recognize or support `inline `REFERENCES'
     specifications' (as defined in the SQL standard) where the
     references are defined as part of the column specification. MySQL
     accepts `REFERENCES' clauses only when specified as part of a
     separate `FOREIGN KEY' specification.

     *Note*:

     Partitioned tables employing the *Note `InnoDB':
     innodb-storage-engine. storage engine do not support foreign keys.
     See *Note partitioning-limitations::, for more information.

   * There is a hard limit of 4096 columns per table, but the effective
     maximum may be less for a given table and depends on the factors
     discussed in *Note column-count-limit::.

The `TABLESPACE' and `STORAGE' table options are employed only with
*Note `NDBCLUSTER': mysql-cluster. tables. The tablespace named
TABLESPACE_NAME must already have been created using *Note `CREATE
TABLESPACE': create-tablespace. `STORAGE' determines the type of
storage used (disk or memory), and can be one of `DISK', `MEMORY', or
`DEFAULT'.

`TABLESPACE ... STORAGE DISK' assigns a table to a MySQL Cluster Disk
Data tablespace. See *Note mysql-cluster-disk-data::, for more
information.

*Important*:

A `STORAGE' clause cannot be used in a *Note `CREATE TABLE':
create-table. statement without a `TABLESPACE' clause.

The `ENGINE' table option specifies the storage engine for the table.

* Storage Engines *

The `ENGINE' table option specifies the storage engine for the table,
using one of the names shown in the following table. The engine name
can be unquoted or quoted. The quoted name `'DEFAULT'' is equivalent to
specifying the default storage engine name.

This table lists storage engine names that are taken by the `ENGINE'
table option. A description is provided for each name.

Storage Engine     Description
`InnoDB'           Transaction-safe tables with row locking and
                   foreign keys. The default storage engine for new
                   tables. See *Note innodb-storage-engine::, and in
                   particular *Note innodb-default-se:: if you have
                   MySQL experience but are new to `InnoDB'.
`MyISAM'           The binary portable storage engine that is
                   primarily used for read-only or read-mostly
                   workloads. See *Note myisam-storage-engine::.
`MEMORY'           The data for this storage engine is stored only
                   in memory. See *Note memory-storage-engine::.
`CSV'              Tables that store rows in comma-separated values
                   format. See *Note csv-storage-engine::.
`ARCHIVE'          The archiving storage engine. See *Note
                   archive-storage-engine::.
`EXAMPLE'          An example engine. See *Note
                   example-storage-engine::.
`FEDERATED'        Storage engine that accesses remote tables. See
                   *Note federated-storage-engine::.
`HEAP'             This is a synonym for `MEMORY'.
`MERGE'            A collection of `MyISAM' tables used as one
                   table. Also known as `MRG_MyISAM'. See *Note
                   merge-storage-engine::.
*Note              Clustered, fault-tolerant, memory-based tables.
`NDBCLUSTER':      Also known as *Note `NDB': mysql-cluster. See
mysql-cluster.     *Note mysql-cluster::.

If a storage engine is specified that is not available, MySQL uses the
default engine instead. Normally, this is `MyISAM'. For example, if a
table definition includes the `ENGINE=INNODB' option but the MySQL
server does not support `INNODB' tables, the table is created as a
`MyISAM' table. This makes it possible to have a replication setup
where you have transactional tables on the master but tables created on
the slave are nontransactional (to get more speed). In MySQL 5.5, a
warning occurs if the storage engine specification is not honored.

Engine substitution can be controlled by the setting of the
`NO_ENGINE_SUBSTITUTION' SQL mode, as described in *Note
server-sql-mode::.

*Note*:

The older `TYPE' option was synonymous with `ENGINE'. `TYPE' was
deprecated in MySQL 4.0 and removed in MySQL 5.5. _When upgrading to
MySQL 5.5 or later, you must convert existing applications that rely on
`TYPE' to use `ENGINE' instead_.

* Optimizing Performance *

The other table options are used to optimize the behavior of the table.
In most cases, you do not have to specify any of them.  These options
apply to all storage engines unless otherwise indicated. Options that
do not apply to a given storage engine may be accepted and remembered
as part of the table definition. Such options then apply if you later
use *Note `ALTER TABLE': alter-table. to convert the table to use a
different storage engine.

   * `AUTO_INCREMENT'

     The initial `AUTO_INCREMENT' value for the table. In MySQL 5.5,
     this works for `MyISAM', `MEMORY', `InnoDB', and `ARCHIVE' tables.
     To set the first auto-increment value for engines that do not
     support the `AUTO_INCREMENT' table option, insert a `dummy' row
     with a value one less than the desired value after creating the
     table, and then delete the dummy row.

     For engines that support the `AUTO_INCREMENT' table option in
     *Note `CREATE TABLE': create-table.  statements, you can also use
     `ALTER TABLE TBL_NAME AUTO_INCREMENT = N' to reset the
     `AUTO_INCREMENT' value. The value cannot be set lower than the
     maximum value currently in the column.

   * `AVG_ROW_LENGTH'

     An approximation of the average row length for your table. You
     need to set this only for large tables with variable-size rows.

     When you create a `MyISAM' table, MySQL uses the product of the
     `MAX_ROWS' and `AVG_ROW_LENGTH' options to decide how big the
     resulting table is. If you don't specify either option, the
     maximum size for `MyISAM' data and index files is 256TB by
     default. (If your operating system does not support files that
     large, table sizes are constrained by the file size limit.) If you
     want to keep down the pointer sizes to make the index smaller and
     faster and you don't really need big files, you can decrease the
     default pointer size by setting the `myisam_data_pointer_size'
     system variable. (See *Note server-system-variables::.) If you
     want all your tables to be able to grow above the default limit
     and are willing to have your tables slightly slower and larger than
     necessary, you can increase the default pointer size by setting
     this variable. Setting the value to 7 permits table sizes up to
     65,536TB.

   * `[DEFAULT] CHARACTER SET'

     Specify a default character set for the table.  `CHARSET' is a
     synonym for `CHARACTER SET'. If the character set name is
     `DEFAULT', the database character set is used.

   * `CHECKSUM'

     Set this to 1 if you want MySQL to maintain a live checksum for
     all rows (that is, a checksum that MySQL updates automatically as
     the table changes). This makes the table a little slower to
     update, but also makes it easier to find corrupted tables. The
     *Note `CHECKSUM TABLE': checksum-table. statement reports the
     checksum.  (`MyISAM' only.)

   * `[DEFAULT] COLLATE'

     Specify a default collation for the table.

   * `COMMENT'

     A comment for the table, up to 2048 characters long (60 characters
     before MySQL 5.5.3).

   * `CONNECTION'

     The connection string for a `FEDERATED' table.

     *Note*:

     Older versions of MySQL used a `COMMENT' option for the connection
     string.

   * `DATA DIRECTORY', `INDEX DIRECTORY'

     By using `DATA DIRECTORY='DIRECTORY'' or `INDEX
     DIRECTORY='DIRECTORY'' you can specify where the `MyISAM' storage
     engine should put a table's data file and index file. The directory
     must be the full path name to the directory, not a relative path.

     *Important*:

     Table-level `DATA DIRECTORY' and `INDEX DIRECTORY' options are
     ignored for partitioned tables. (Bug #32091)

     These options work only when you are not using the
     `--skip-symbolic-links' option. Your operating system must also
     have a working, thread-safe `realpath()' call. See *Note
     symbolic-links-to-tables::, for more complete information.

     If a `MyISAM' table is created with no `DATA DIRECTORY' option, the
     `.MYD' file is created in the database directory. By default, if
     `MyISAM' finds an existing `.MYD' file in this case, it overwrites
     it. The same applies to `.MYI' files for tables created with no
     `INDEX DIRECTORY' option. To suppress this behavior, start the
     server with the `--keep_files_on_create' option, in which case
     `MyISAM' will not overwrite existing files and returns an error
     instead.

     If a `MyISAM' table is created with a `DATA DIRECTORY' or `INDEX
     DIRECTORY' option and an existing `.MYD' or `.MYI' file is found,
     MyISAM always returns an error. It will not overwrite a file in
     the specified directory.

     *Important*:

     You cannot use path names that contain the MySQL data directory
     with `DATA DIRECTORY' or `INDEX DIRECTORY'. This includes
     partitioned tables and individual table partitions. (See Bug
     #32167.)

   * `DELAY_KEY_WRITE'

     Set this to 1 if you want to delay key updates for the table until
     the table is closed. See the description of the `delay_key_write'
     system variable in *Note server-system-variables::.  (`MyISAM'
     only.)

   * `INSERT_METHOD'

     If you want to insert data into a `MERGE' table, you must specify
     with `INSERT_METHOD' the table into which the row should be
     inserted.  `INSERT_METHOD' is an option useful for `MERGE' tables
     only. Use a value of `FIRST' or `LAST' to have inserts go to the
     first or last table, or a value of `NO' to prevent inserts. See
     *Note merge-storage-engine::.

   * `KEY_BLOCK_SIZE'

     For compressed `InnoDB' tables, optionally specifies the size in
     kilobytes to use for pages. The value is treated as a hint; a
     different size could be used if necessary. A value of 0 represents
     that the default compressed page size.  See *Note
     innodb-compression:: for usage details.

     Individual index definitions can specify a `KEY_BLOCK_SIZE' value
     of their own to override the table value.

     *Note*:

     Oracle recommends enabling `innodb_strict_mode' when using the
     `KEY_BLOCK_SIZE' clause for `InnoDB' tables. See *Note
     innodb-other-changes-strict-mode:: for details.

   * `MAX_ROWS'

     The maximum number of rows you plan to store in the table.  This
     is not a hard limit, but rather a hint to the storage engine that
     the table must be able to store at least this many rows.

     The *Note `NDB': mysql-cluster. storage engine treats this value
     as a maxmimum. If you plan to create very large MySQL Cluster
     tables (containing millions of rows), you should use this option
     to insure that *Note `NDB': mysql-cluster. allocates sufficient
     number of index slots in the hash table used for storing hashes of
     the table's primary keys by setting `MAX_ROWS = 2 * ROWS', where
     ROWS is the number of rows that you expect to insert into the
     table.

     The maximum `MAX_ROWS' value is 4294967295; larger values are
     truncated to this limit.

   * `MIN_ROWS'

     The minimum number of rows you plan to store in the table. The
     *Note `MEMORY': memory-storage-engine. storage engine uses this
     option as a hint about memory use.

   * `PACK_KEYS'

     `PACK_KEYS' takes effect only with `MyISAM' tables. Set this
     option to 1 if you want to have smaller indexes. This usually
     makes updates slower and reads faster. Setting the option to 0
     disables all packing of keys. Setting it to `DEFAULT' tells the
     storage engine to pack only long *Note `CHAR': char, *Note
     `VARCHAR': char, *Note `BINARY': binary-varbinary, or *Note
     `VARBINARY': binary-varbinary. columns.

     If you do not use `PACK_KEYS', the default is to pack strings, but
     not numbers. If you use `PACK_KEYS=1', numbers are packed as well.

     When packing binary number keys, MySQL uses prefix compression:

        * Every key needs one extra byte to indicate how many bytes of
          the previous key are the same for the next key.

        * The pointer to the row is stored in high-byte-first order
          directly after the key, to improve compression.

     This means that if you have many equal keys on two consecutive
     rows, all following `same' keys usually only take two bytes
     (including the pointer to the row). Compare this to the ordinary
     case where the following keys takes `storage_size_for_key +
     pointer_size' (where the pointer size is usually 4). Conversely,
     you get a significant benefit from prefix compression only if you
     have many numbers that are the same. If all keys are totally
     different, you use one byte more per key, if the key is not a key
     that can have `NULL' values. (In this case, the packed key length
     is stored in the same byte that is used to mark if a key is
     `NULL'.)

   * `PASSWORD'

     This option is unused. If you have a need to scramble your `.frm'
     files and make them unusable to any other MySQL server, please
     contact our sales department.

   * `ROW_FORMAT'

     Defines the physical format in which the rows are stored. The
     choices differ depending on the storage engine used for the table.

     For `InnoDB' tables:

        * Rows are stored in compact format (`ROW_FORMAT=COMPACT') by
          default.

        * The noncompact format used in older versions of MySQL can
          still be requested by specifying `ROW_FORMAT=REDUNDANT'.

        * To enable compression for `InnoDB' tables, specify
          `ROW_FORMAT=COMPRESSED' and follow the procedures in *Note
          innodb-compression::.

        * For more efficient `InnoDB' storage of data types, especially
          *Note `BLOB': blob.  types, specify `ROW_FORMAT=DYNAMIC' and
          follow the procedures in *Note innodb-row-format-dynamic::.
          Both the `COMPRESSED' and `DYNAMIC' row formats require
          creating the table with the configuration settings
          `innodb_file_per_table=1' and `innodb_file_format=barracuda'.

        * When you specify a non-default `ROW_FORMAT' clause, consider
          also enabling the `innodb_strict_mode' configuration option.
          See *Note innodb-other-changes-strict-mode:: for details.

     For `MyISAM' tables, the option value can be `FIXED' or `DYNAMIC'
     for static or variable-length row format.  *Note `myisampack':
     myisampack. sets the type to `COMPRESSED'. See *Note
     myisam-table-formats::.

     *Note*:

     When executing a *Note `CREATE TABLE': create-table.  statement,
     if you specify a row format that is not supported by the storage
     engine that is used for the table, the table is created using that
     storage engine's default row format. The information reported in
     this column in response to *Note `SHOW TABLE STATUS':
     show-table-status. is the actual row format used. This may differ
     from the value in the `Create_options' column because the original
     *Note `CREATE TABLE': create-table.  definition is retained during
     creation.

   * *Note `UNION': union.

     *Note `UNION': union. is used when you want to access a collection
     of identical `MyISAM' tables as one. This works only with `MERGE'
     tables. See *Note merge-storage-engine::.

     You must have `SELECT', `UPDATE', and `DELETE' privileges for the
     tables you map to a `MERGE' table.

     *Note*:

     Formerly, all tables used had to be in the same database as the
     `MERGE' table itself. This restriction no longer applies.

* Partitioning *

PARTITION_OPTIONS can be used to control partitioning of the table
created with *Note `CREATE TABLE': create-table.

*Important*:

Not all options shown in the syntax for PARTITION_OPTIONS at the
beginning of this section are available for all partitioning types.
Please see the listings for the following individual types for
information specific to each type, and see *Note partitioning::, for
more complete information about the workings of and uses for
partitioning in MySQL, as well as additional examples of table creation
and other statements relating to MySQL partitioning.

If used, a PARTITION_OPTIONS clause begins with `PARTITION BY'. This
clause contains the function that is used to determine the partition;
the function returns an integer value ranging from 1 to NUM, where NUM
is the number of partitions. (The maximum number of user-defined
partitions which a table may contain is 1024; the number of
subpartitions--discussed later in this section--is included in this
maximum.) The choices that are available for this function in MySQL 5.5
are shown in the following list:

   * `HASH(EXPR)': Hashes one or more columns to create a key for
     placing and locating rows. EXPR is an expression using one or more
     table columns. This can be any valid MySQL expression (including
     MySQL functions) that yields a single integer value. For example,
     these are both valid *Note `CREATE TABLE': create-table.
     statements using `PARTITION BY HASH':

          CREATE TABLE t1 (col1 INT, col2 CHAR(5))
              PARTITION BY HASH(col1);

          CREATE TABLE t1 (col1 INT, col2 CHAR(5), col3 DATETIME)
              PARTITION BY HASH ( YEAR(col3) );

     You may not use either `VALUES LESS THAN' or `VALUES IN' clauses
     with `PARTITION BY HASH'.

     `PARTITION BY HASH' uses the remainder of EXPR divided by the
     number of partitions (that is, the modulus). For examples and
     additional information, see *Note partitioning-hash::.

     The `LINEAR' keyword entails a somewhat different algorithm. In
     this case, the number of the partition in which a row is stored is
     calculated as the result of one or more logical `AND' operations.
     For discussion and examples of linear hashing, see *Note
     partitioning-linear-hash::.

   * `KEY [ALGORITHM={1|2}] (COLUMN_LIST)': This is similar to `HASH',
     except that MySQL supplies the hashing function so as to guarantee
     an even data distribution. The COLUMN_LIST argument is simply a
     list of 1 or more table columns (maximum: 16). This example shows
     a simple table partitioned by key, with 4 partitions:

          CREATE TABLE tk (col1 INT, col2 CHAR(5), col3 DATE)
              PARTITION BY KEY(col3)
              PARTITIONS 4;

     For tables that are partitioned by key, you can employ linear
     partitioning by using the `LINEAR' keyword.  This has the same
     effect as with tables that are partitioned by `HASH'. That is, the
     partition number is found using the `&' operator rather than the
     modulus (see *Note partitioning-linear-hash::, and *Note
     partitioning-key::, for details). This example uses linear
     partitioning by key to distribute data between 5 partitions:

          CREATE TABLE tk (col1 INT, col2 CHAR(5), col3 DATE)
              PARTITION BY LINEAR KEY(col3)
              PARTITIONS 5;

     The `ALGORITHM={1|2}' option is supported with `[SUB]PARTITION BY
     [LINEAR] KEY' beginning with MySQL 5.5.31. `ALGORITHM=1' causes
     the server to use the same key-hashing functions as MySQL 5.1;
     `ALGORITHM=2' means that the server employs the key-hashing
     functions implemented and used by default for new `KEY'
     partitioned tables in MySQL 5.5 and later. (Partitioned tables
     created with the key-hashing functions employed in MySQL 5.5 and
     later cannot be used by a MySQL 5.1 server.) Not specifying the
     option has the same effect as using `ALGORITHM=2'. This option is
     intended for use chiefly when upgrading or downgrading `[LINEAR]
     KEY' partitioned tables between MySQL 5.1 and later MySQL
     versions, or for creating tables partitioned by `KEY' or `LINEAR
     KEY' on a MySQL 5.5 or later server which can be used on a MySQL
     5.1 server. For more information, see *Note
     alter-table-partition-operations::.

     *Note `mysqldump': mysqldump. in MySQL 5.5.31 and later writes
     this option encased in versioned comments, like this:

          CREATE TABLE t1 (a INT)
          /*!50100 PARTITION BY KEY */ _/*!50531 ALGORITHM = 1 */_ /*!50100 ()
                PARTITIONS 3 */

     This causes MySQL 5.5.30 and earlier servers to ignore the option,
     which would otherwise cause a syntax error in those versions. If
     you plan to load a dump made on a MySQL 5.5.31 or later MySQL 5.5
     server where you use tables that are partitioned or subpartitioned
     by `KEY' into a MySQL 5.6 server previous to version 5.6.11, be
     sure to consult Upgrading from MySQL 5.5 to 5.6
     (http://dev.mysql.com/doc/refman/5.6/en/upgrading-from-previous-series.html),
     before proceeding. (The information found there also applies if
     you are loading a dump containing `KEY' partitioned or
     subpartitioned tables made from a MySQL 5.6.11 or later server
     into a MySQL 5.5.30 or earlier server.)

     Also in MySQL 5.5.31 and later, `ALGORITHM=1' is shown when
     necessary in the output of *Note `SHOW CREATE TABLE':
     show-create-table. using versioned comments in the same manner as
     *Note `mysqldump': mysqldump. `ALGORITHM=2' is always omitted from
     `SHOW CREATE TABLE' output, even if this option was specified when
     creating the original table.

     You may not use either `VALUES LESS THAN' or `VALUES IN' clauses
     with `PARTITION BY KEY'.

   * `RANGE(EXPR)': In this case, EXPR shows a range of values using a
     set of `VALUES LESS THAN' operators. When using range
     partitioning, you must define at least one partition using `VALUES
     LESS THAN'.  You cannot use `VALUES IN' with range partitioning.

     *Note*:

     For tables partitioned by `RANGE', `VALUES LESS THAN' must be used
     with either an integer literal value or an expression that
     evaluates to a single integer value. In MySQL 5.5, you can
     overcome this limitation in a table that is defined using
     `PARTITION BY RANGE COLUMNS', as described later in this section.

     Suppose that you have a table that you wish to partition on a
     column containing year values, according to the following scheme.

     This table illustrates a table partitioning scheme based on a
     column containing year values, as described in the preceding text.
     The table lists partition numbers and corresponding range of years.

     Partition Number:           Years Range:
     0                           1990 and earlier
     1                           1991 to 1994
     2                           1995 to 1998
     3                           1999 to 2002
     4                           2003 to 2005
     5                           2006 and later

     A table implementing such a partitioning scheme can be realized by
     the *Note `CREATE TABLE': create-table.  statement shown here:

          CREATE TABLE t1 (
              year_col  INT,
              some_data INT
          )
          PARTITION BY RANGE (year_col) (
              PARTITION p0 VALUES LESS THAN (1991),
              PARTITION p1 VALUES LESS THAN (1995),
              PARTITION p2 VALUES LESS THAN (1999),
              PARTITION p3 VALUES LESS THAN (2002),
              PARTITION p4 VALUES LESS THAN (2006),
              PARTITION p5 VALUES LESS THAN MAXVALUE
          );

     `PARTITION ... VALUES LESS THAN ...' statements work in a
     consecutive fashion. `VALUES LESS THAN MAXVALUE' works to specify
     `leftover' values that are greater than the maximum value
     otherwise specified.

     Note that `VALUES LESS THAN' clauses work sequentially in a manner
     similar to that of the `case' portions of a `switch ...  case'
     block (as found in many programming languages such as C, Java, and
     PHP). That is, the clauses must be arranged in such a way that the
     upper limit specified in each successive `VALUES LESS THAN' is
     greater than that of the previous one, with the one referencing
     `MAXVALUE' coming last of all in the list.

   * `RANGE COLUMNS(COLUMN_LIST)': This variant on `RANGE' was
     introduced in MySQL 5.5.0 to facilitate partition pruning for
     queries using range conditions on multiple columns (that is, having
     conditions such as `WHERE a = 1 AND b < 10' or `WHERE a = 1 AND b
     = 10 AND c < 10'). It enables you to specify value ranges in
     multiple columns by using a list of columns in the `COLUMNS'
     clause and a set of column values in each `PARTITION ... VALUES
     LESS THAN (VALUE_LIST)' partition definition clause. (In the
     simplest case, this set consists of a single column.) The maximum
     number of columns that can be referenced in the COLUMN_LIST and
     VALUE_LIST is 16.

     The COLUMN_LIST used in the `COLUMNS' clause may contain only
     names of columns; each column in the list must be one of the
     following MySQL data types: the integer types; the string types;
     and time or date column types. Columns using `BLOB', `TEXT',
     `SET', `ENUM', `BIT', or spatial data types are not permitted;
     columns that use floating-point number types are also not
     permitted. You also may not use functions or arithmetic
     expressions in the `COLUMNS' clause.

     The `VALUES LESS THAN' clause used in a partition definition must
     specify a literal value for each column that appears in the
     `COLUMNS()' clause; that is, the list of values used for each
     `VALUES LESS THAN' clause must contain the same number of values
     as there are columns listed in the `COLUMNS' clause. An attempt to
     use more or fewer values in a `VALUES LESS THAN' clause than there
     are in the `COLUMNS' clause causes the statement to fail with the
     error `Inconsistency in usage of column lists for
     partitioning...'. You cannot use `NULL' for any value appearing in
     `VALUES LESS THAN'. It is possible to use `MAXVALUE' more than
     once for a given column other than the first, as shown in this
     example:

          CREATE TABLE rc (
              a INT NOT NULL,
              b INT NOT NULL
          )
          PARTITION BY RANGE COLUMNS(a,b) (
              PARTITION p0 VALUES LESS THAN (10,5),
              PARTITION p1 VALUES LESS THAN (20,10),
              PARTITION p2 VALUES LESS THAN (MAXVALUE,15),
              PARTITION p3 VALUES LESS THAN (MAXVALUE,MAXVALUE)
          );

     Each value used in a `VALUES LESS THAN' value list must match the
     type of the corresponding column exactly; no conversion is made.
     For example, you cannot use the string `'1'' for a value that
     matches a column that uses an integer type (you must use the
     numeral `1' instead), nor can you use the numeral `1' for a value
     that matches a column that uses a string type (in such a case, you
     must use a quoted string: `'1'').

     For more information, see *Note partitioning-range::, and *Note
     partitioning-pruning::.

   * `LIST(EXPR)': This is useful when assigning partitions based on a
     table column with a restricted set of possible values, such as a
     state or country code. In such a case, all rows pertaining to a
     certain state or country can be assigned to a single partition, or
     a partition can be reserved for a certain set of states or
     countries. It is similar to `RANGE', except that only `VALUES IN'
     may be used to specify permissible values for each partition.

     `VALUES IN' is used with a list of values to be matched. For
     instance, you could create a partitioning scheme such as the
     following:

          CREATE TABLE client_firms (
              id   INT,
              name VARCHAR(35)
          )
          PARTITION BY LIST (id) (
              PARTITION r0 VALUES IN (1, 5, 9, 13, 17, 21),
              PARTITION r1 VALUES IN (2, 6, 10, 14, 18, 22),
              PARTITION r2 VALUES IN (3, 7, 11, 15, 19, 23),
              PARTITION r3 VALUES IN (4, 8, 12, 16, 20, 24)
          );

     When using list partitioning, you must define at least one
     partition using `VALUES IN'. You cannot use `VALUES LESS THAN'
     with `PARTITION BY LIST'.

     *Note*:

     For tables partitioned by `LIST', the value list used with `VALUES
     IN' must consist of integer values only. In MySQL 5.5, you can
     overcome this limitation using partitioning by `LIST COLUMNS',
     which is described later in this section.

   * `LIST COLUMNS(COLUMN_LIST)': This variant on `LIST' was introduced
     in MySQL 5.5.0 to facilitate partition pruning for queries using
     comparison conditions on multiple columns (that is, having
     conditions such as `WHERE a = 5 AND b = 5' or `WHERE a = 1 AND b =
     10 AND c = 5'). It enables you to specify values in multiple
     columns by using a list of columns in the `COLUMNS' clause and a
     set of column values in each `PARTITION ... VALUES IN
     (VALUE_LIST)' partition definition clause.

     The rules governing regarding data types for the column list used
     in `LIST COLUMNS(COLUMN_LIST)' and the value list used in `VALUES
     IN(VALUE_LIST)' are the same as those for the column list used in
     `RANGE COLUMNS(COLUMN_LIST)' and the value list used in `VALUES
     LESS THAN(VALUE_LIST)', respectively, except that in the `VALUES
     IN' clause, `MAXVALUE' is not permitted, and you may use `NULL'.

     There is one important difference between the list of values used
     for `VALUES IN' with `PARTITION BY LIST COLUMNS' as opposed to
     when it is used with `PARTITION BY LIST'. When used with
     `PARTITION BY LIST COLUMNS', each element in the `VALUES IN'
     clause must be a _set_ of column values; the number of values in
     each set must be the same as the number of columns used in the
     `COLUMNS' clause, and the data types of these values must match
     those of the columns (and occur in the same order). In the
     simplest case, the set consists of a single column. The maximum
     number of columns that can be used in the COLUMN_LIST and in the
     elements making up the VALUE_LIST is 16.

     The table defined by the following `CREATE TABLE' statement
     provides an example of a table using `LIST COLUMNS' partitioning:

          CREATE TABLE lc (
              a INT NULL,
              b INT NULL
          )
          PARTITION BY LIST COLUMNS(a,b) (
              PARTITION p0 VALUES IN( (0,0), (NULL,NULL) ),
              PARTITION p1 VALUES IN( (0,1), (0,2), (0,3), (1,1), (1,2) ),
              PARTITION p2 VALUES IN( (1,0), (2,0), (2,1), (3,0), (3,1) ),
              PARTITION p3 VALUES IN( (1,3), (2,2), (2,3), (3,2), (3,3) )
          );

   * The number of partitions may optionally be specified with a
     `PARTITIONS NUM' clause, where NUM is the number of partitions. If
     both this clause _and_ any `PARTITION' clauses are used, NUM must
     be equal to the total number of any partitions that are declared
     using `PARTITION' clauses.

     *Note*:

     Whether or not you use a `PARTITIONS' clause in creating a table
     that is partitioned by `RANGE' or `LIST', you must still include
     at least one `PARTITION VALUES' clause in the table definition
     (see below).

   * A partition may optionally be divided into a number of
     subpartitions. This can be indicated by using the optional
     `SUBPARTITION BY' clause. Subpartitioning may be done by `HASH' or
     `KEY'.  Either of these may be `LINEAR'. These work in the same
     way as previously described for the equivalent partitioning types.
     (It is not possible to subpartition by `LIST' or `RANGE'.)

     The number of subpartitions can be indicated using the
     `SUBPARTITIONS' keyword followed by an integer value.

   * Rigorous checking of the value used in `PARTITIONS' or
     `SUBPARTITIONS' clauses is applied and this value must adhere to
     the following rules:

        * The value must be a positive, nonzero integer.

        * No leading zeros are permitted.

        * The value must be an integer literal, and cannot not be an
          expression. For example, `PARTITIONS 0.2E+01' is not
          permitted, even though `0.2E+01' evaluates to `2'. (Bug
          #15890)

*Note*:

The expression (EXPR) used in a `PARTITION BY' clause cannot refer to
any columns not in the table being created; such references are
specifically not permitted and cause the statement to fail with an
error. (Bug #29444)

Each partition may be individually defined using a PARTITION_DEFINITION
clause. The individual parts making up this clause are as follows:

   * `PARTITION PARTITION_NAME': This specifies a logical name for the
     partition.

   * A `VALUES' clause: For range partitioning, each partition must
     include a `VALUES LESS THAN' clause; for list partitioning, you
     must specify a `VALUES IN' clause for each partition. This is used
     to determine which rows are to be stored in this partition. See
     the discussions of partitioning types in *Note partitioning::, for
     syntax examples.

   * An optional `COMMENT' clause may be used to specify a string that
     describes the partition. Example:

          COMMENT = 'Data for the years previous to 1999'

   * `DATA DIRECTORY' and `INDEX DIRECTORY' may be used to indicate the
     directory where, respectively, the data and indexes for this
     partition are to be stored. Both the `DATA_DIR' and the `INDEX_DIR'
     must be absolute system path names. Example:

          CREATE TABLE th (id INT, name VARCHAR(30), adate DATE)
          PARTITION BY LIST(YEAR(adate))
          (
            PARTITION p1999 VALUES IN (1995, 1999, 2003)
              DATA DIRECTORY = '`/var/appdata/95/data''
              INDEX DIRECTORY = '`/var/appdata/95/idx'',
            PARTITION p2000 VALUES IN (1996, 2000, 2004)
              DATA DIRECTORY = '`/var/appdata/96/data''
              INDEX DIRECTORY = '`/var/appdata/96/idx'',
            PARTITION p2001 VALUES IN (1997, 2001, 2005)
              DATA DIRECTORY = '`/var/appdata/97/data''
              INDEX DIRECTORY = '`/var/appdata/97/idx'',
            PARTITION p2002 VALUES IN (1998, 2002, 2006)
              DATA DIRECTORY = '`/var/appdata/98/data''
              INDEX DIRECTORY = '`/var/appdata/98/idx''
          );

     `DATA DIRECTORY' and `INDEX DIRECTORY' behave in the same way as
     in the *Note `CREATE TABLE': create-table. statement's
     TABLE_OPTION clause as used for `MyISAM' tables.

     One data directory and one index directory may be specified per
     partition. If left unspecified, the data and indexes are stored by
     default in the table's database directory.

     On Windows, the `DATA DIRECTORY' and `INDEX DIRECTORY' options are
     not supported for individual partitions or subpartitions. These
     options are ignored on Windows, except that a warning is
     generated. (Bug #30459)

     *Note*:

     The `DATA DIRECTORY' and `INDEX DIRECTORY' options are ignored for
     creating partitioned tables if `NO_DIR_IN_CREATE' is in effect.
     (Bug #24633)

   * `MAX_ROWS' and `MIN_ROWS' may be used to specify, respectively,
     the maximum and minimum number of rows to be stored in the
     partition. The values for MAX_NUMBER_OF_ROWS and
     MIN_NUMBER_OF_ROWS must be positive integers. As with the
     table-level options with the same names, these act only as
     `suggestions' to the server and are not hard limits.

   * The optional `TABLESPACE' clause may be used to designate a
     tablespace for the partition. Used for MySQL Cluster only.

   * The partitioning handler accepts a `[STORAGE] ENGINE' option for
     both `PARTITION' and `SUBPARTITION'. Currently, the only way in
     which this can be used is to set all partitions or all
     subpartitions to the same storage engine, and an attempt to set
     different storage engines for partitions or subpartitions in the
     same table will give rise to the error `ERROR 1469 (HY000): The
     mix of handlers in the partitions is not permitted in this version
     of MySQL'. We expect to lift this restriction on partitioning in a
     future MySQL release.

   * The `NODEGROUP' option can be used to make this partition act as
     part of the node group identified by NODE_GROUP_ID. This option is
     applicable only to MySQL Cluster.

   * The partition definition may optionally contain one or more
     SUBPARTITION_DEFINITION clauses.  Each of these consists at a
     minimum of the `SUBPARTITION NAME', where NAME is an identifier
     for the subpartition. Except for the replacement of the
     `PARTITION' keyword with `SUBPARTITION', the syntax for a
     subpartition definition is identical to that for a partition
     definition.

     Subpartitioning must be done by `HASH' or `KEY', and can be done
     only on `RANGE' or `LIST' partitions. See *Note
     partitioning-subpartitions::.

Partitions can be modified, merged, added to tables, and dropped from
tables. For basic information about the MySQL statements to accomplish
these tasks, see *Note alter-table::. For more detailed descriptions
and examples, see *Note partitioning-management::.

*Important*:

The original *Note `CREATE TABLE': create-table.  statement, including
all specifications and table options are stored by MySQL when the table
is created. The information is retained so that if you change storage
engines, collations or other settings using an *Note `ALTER TABLE':
alter-table. statement, the original table options specified are
retained. This enables you to change between *Note `InnoDB':
innodb-storage-engine. and *Note `MyISAM': myisam-storage-engine. table
types even though the row formats supported by the two engines are
different.

Because the text of the original statement is retained, but due to the
way that certain values and options may be silently reconfigured (such
as the `ROW_FORMAT'), the active table definition (accessible through
*Note `DESCRIBE': describe. or with *Note `SHOW TABLE STATUS':
show-table-status.) and the table creation string (accessible through
*Note `SHOW CREATE TABLE': show-create-table.) will report different
values.

* Cloning or Copying a Table *

You can create one table from another by adding a *Note `SELECT':
select. statement at the end of the *Note `CREATE TABLE': create-table.
statement:

     CREATE TABLE NEW_TBL SELECT * FROM ORIG_TBL;

For more information, see *Note create-table-select::.

Use `LIKE' to create an empty table based on the definition of another
table, including any column attributes and indexes defined in the
original table:

     CREATE TABLE NEW_TBL LIKE ORIG_TBL;

The copy is created using the same version of the table storage format
as the original table. The `SELECT' privilege is required on the
original table.

`LIKE' works only for base tables, not for views.

*Important*:

Beginning with MySQL 5.5.3, you cannot execute `CREATE TABLE' or
`CREATE TABLE ... LIKE' while a *Note `LOCK TABLES': lock-tables.
statement is in effect.

Also as of MySQL 5.5.3, *Note `CREATE TABLE ... LIKE': create-table.
makes the same checks as *Note `CREATE TABLE': create-table. and does
not just copy the `.frm' file. This means that if the current SQL mode
is different from the mode in effect when the original table was
created, the table definition might be considered invalid for the new
mode and the statement will fail.

`CREATE TABLE ... LIKE' does not preserve any `DATA DIRECTORY' or `INDEX
DIRECTORY' table options that were specified for the original table, or
any foreign key definitions.

If the original table is a `TEMPORARY' table, `CREATE TABLE ... LIKE'
does not preserve `TEMPORARY'. To create a `TEMPORARY' destination
table, use `CREATE TEMPORARY TABLE ... LIKE'.


File: manual.info,  Node: create-table-select,  Next: create-table-foreign-keys,  Prev: create-table,  Up: create-table

13.1.17.1 `CREATE TABLE ... SELECT' Syntax
..........................................

You can create one table from another by adding a *Note `SELECT':
select. statement at the end of the *Note `CREATE TABLE': create-table.
statement:

     CREATE TABLE NEW_TBL [AS] SELECT * FROM ORIG_TBL;

MySQL creates new columns for all elements in the *Note `SELECT':
select. For example:

     mysql> CREATE TABLE test (a INT NOT NULL AUTO_INCREMENT,
         ->        PRIMARY KEY (a), KEY(b))
         ->        ENGINE=MyISAM SELECT b,c FROM test2;

This creates a *Note `MyISAM': myisam-storage-engine. table with three
columns, `a', `b', and `c'. The `ENGINE' option is part of the *Note
`CREATE TABLE': create-table.  statement, and should not be used
following the *Note `SELECT': select.; this would result in a syntax
error. The same is true for other *Note `CREATE TABLE': create-table.
options such as `CHARSET'.

Notice that the columns from the *Note `SELECT': select. statement are
appended to the right side of the table, not overlapped onto it. Take
the following example:

     mysql> SELECT * FROM foo;
     +---+
     | n |
     +---+
     | 1 |
     +---+

     mysql> CREATE TABLE bar (m INT) SELECT n FROM foo;
     Query OK, 1 row affected (0.02 sec)
     Records: 1  Duplicates: 0  Warnings: 0

     mysql> SELECT * FROM bar;
     +------+---+
     | m    | n |
     +------+---+
     | NULL | 1 |
     +------+---+
     1 row in set (0.00 sec)

For each row in table `foo', a row is inserted in `bar' with the values
from `foo' and default values for the new columns.

In a table resulting from *Note `CREATE TABLE ... SELECT':
create-table, columns named only in the *Note `CREATE TABLE':
create-table. part come first.  Columns named in both parts or only in
the *Note `SELECT': select. part come after that. The data type of
*Note `SELECT': select. columns can be overridden by also specifying
the column in the *Note `CREATE TABLE': create-table. part.

If any errors occur while copying the data to the table, it is
automatically dropped and not created.

You can precede the *Note `SELECT': select. by `IGNORE' or *Note
`REPLACE': replace. to indicate how to handle rows that duplicate
unique key values. With `IGNORE', new rows that duplicate an existing
row on a unique key value are discarded. With *Note `REPLACE': replace,
new rows replace rows that have the same unique key value. If neither
`IGNORE' nor *Note `REPLACE': replace. is specified, duplicate unique
key values result in an error.

Because the ordering of the rows in the underlying *Note `SELECT':
select. statements cannot always be determined, `CREATE TABLE ...
IGNORE SELECT' and `CREATE TABLE ... REPLACE SELECT' statements in
MySQL 5.5.18 and later are flagged as unsafe for statement-based
replication. With this change, such statements produce a warning in the
log when using statement-based mode and are logged using the row-based
format when using `MIXED' mode. See also *Note replication-sbr-rbr::.

*Note `CREATE TABLE ... SELECT': create-table. does not automatically
create any indexes for you. This is done intentionally to make the
statement as flexible as possible. If you want to have indexes in the
created table, you should specify these before the *Note `SELECT':
select. statement:

     mysql> CREATE TABLE bar (UNIQUE (n)) SELECT n FROM foo;

Some conversion of data types might occur. For example, the
`AUTO_INCREMENT' attribute is not preserved, and *Note `VARCHAR': char.
columns can become *Note `CHAR': char. columns. Retrained attributes
are `NULL' (or `NOT NULL') and, for those columns that have them,
`CHARACTER SET', `COLLATION', `COMMENT', and the `DEFAULT' clause.

When creating a table with *Note `CREATE TABLE ... SELECT':
create-table-select, make sure to alias any function calls or
expressions in the query. If you do not, the `CREATE' statement might
fail or result in undesirable column names.

     CREATE TABLE artists_and_works
       SELECT artist.name, COUNT(work.artist_id) AS number_of_works
       FROM artist LEFT JOIN work ON artist.id = work.artist_id
       GROUP BY artist.id;

You can also explicitly specify the data type for a generated column:

     CREATE TABLE foo (a TINYINT NOT NULL) SELECT b+1 AS a FROM bar;

For *Note `CREATE TABLE ... SELECT': create-table, if `IF NOT EXISTS' is
given and the destination table already exists, the result is version
dependent. Before MySQL 5.5.6, MySQL handles the statement as follows:

   * The table definition given in the *Note `CREATE TABLE':
     create-table. part is ignored.  No error occurs, even if the
     definition does not match that of the existing table. MySQL
     attempts to insert the rows from the *Note `SELECT': select. part
     anyway.

   * If there is a mismatch between the number of columns in the table
     and the number of columns produced by the *Note `SELECT': select.
     part, the selected values are assigned to the rightmost columns.
     For example, if the table contains N columns and the *Note
     `SELECT': select. produces M columns, where M < N, the selected
     values are assigned to the M rightmost columns in the table. Each
     of the initial N - M columns is assigned its default value, either
     that specified explicitly in the column definition or the implicit
     column data type default if the definition contains no default. If
     the *Note `SELECT': select. part produces too many columns (M >
     N), an error occurs.

   * If strict SQL mode is enabled and any of these initial columns do
     not have an explicit default value, the statement fails with an
     error.

The following example illustrates `IF NOT EXISTS' handling:

     mysql> CREATE TABLE t1 (i1 INT DEFAULT 0, i2 INT, i3 INT, i4 INT);
     Query OK, 0 rows affected (0.05 sec)

     mysql> CREATE TABLE IF NOT EXISTS t1 (c1 CHAR(10)) SELECT 1, 2;
     Query OK, 1 row affected, 1 warning (0.01 sec)
     Records: 1  Duplicates: 0  Warnings: 0

     mysql> SELECT * FROM t1;
     +------+------+------+------+
     | i1   | i2   | i3   | i4   |
     +------+------+------+------+
     |    0 | NULL |    1 |    2 |
     +------+------+------+------+
     1 row in set (0.00 sec)

As of MySQL 5.5.6, handling of *Note `CREATE TABLE IF NOT EXISTS ...
SELECT': create-table-select. statements was changed for the case that
the destination table already exists. This change also involves a
change in MySQL 5.1 beginning with 5.1.51.

   * Previously, for *Note `CREATE TABLE IF NOT EXISTS ... SELECT':
     create-table-select, MySQL produced a warning that the table
     exists, but inserted the rows and wrote the statement to the
     binary log anyway. By contrast, *Note `CREATE TABLE ... SELECT':
     create-table-select. (without `IF NOT EXISTS') failed with an
     error, but MySQL inserted no rows and did not write the statement
     to the binary log.

   * MySQL now handles both statements the same way when the
     destination table exists, in that neither statement inserts rows
     or is written to the binary log. The difference between them is
     that MySQL produces a warning when `IF NOT EXISTS' is present and
     an error when it is not.

This change means that, for the preceding example, the *Note `CREATE
TABLE IF NOT EXISTS ... SELECT': create-table-select. statement inserts
nothing into the destination table as of MySQL 5.5.6.

This change in handling of `IF NOT EXISTS' results in an
incompatibility for statement-based replication from a MySQL 5.1 master
with the original behavior and a MySQL 5.5 slave with the new behavior.
Suppose that *Note `CREATE TABLE IF NOT EXISTS ... SELECT':
create-table-select. is executed on the master and the destination
table exists. The result is that rows are inserted on the master but
not on the slave. (Row-based replication does not have this problem.)

To address this issue, statement-based binary logging for *Note `CREATE
TABLE IF NOT EXISTS ... SELECT': create-table-select. is changed in
MySQL 5.1 as of 5.1.51:

   * If the destination table does not exist, there is no change: The
     statement is logged as is.

   * If the destination table does exist, the statement is logged as
     the equivalent pair of *Note `CREATE TABLE IF NOT EXISTS':
     create-table-select. and *Note `INSERT ... SELECT': insert-select.
     statements. (If the *Note `SELECT': select. in the original
     statement is preceded by `IGNORE' or *Note `REPLACE': replace, the
     *Note `INSERT': insert. becomes *Note `INSERT IGNORE': insert. or
     *Note `REPLACE': replace, respectively.)

This change provides forward compatibility for statement-based
replication from MySQL 5.1 to 5.5 because when the destination table
exists, the rows will be inserted on both the master and slave. To take
advantage of this compatibility measure, the 5.1 server must be at
least 5.1.51 and the 5.5 server must be at least 5.5.6.

To upgrade an existing 5.1-to-5.5 replication scenario, upgrade the
master first to 5.1.51 or higher. Note that this differs from the usual
replication upgrade advice of upgrading the slave first.

A workaround for applications that wish to achieve the original effect
(rows inserted regardless of whether the destination table exists) is
to use *Note `CREATE TABLE IF NOT EXISTS': create-table-select. and
*Note `INSERT ... SELECT': insert-select. statements rather than *Note
`CREATE TABLE IF NOT EXISTS ... SELECT': create-table-select.
statements.

Along with the change just described, the following related change was
made: Previously, if an existing view was named as the destination
table for *Note `CREATE TABLE IF NOT EXISTS ... SELECT':
create-table-select, rows were inserted into the underlying base table
and the statement was written to the binary log. As of MySQL 5.1.51 and
5.5.6, nothing is inserted or logged.

To ensure that the binary log can be used to re-create the original
tables, MySQL does not permit concurrent inserts during *Note `CREATE
TABLE ... SELECT': create-table.


File: manual.info,  Node: create-table-foreign-keys,  Next: silent-column-changes,  Prev: create-table-select,  Up: create-table

13.1.17.2 Using `FOREIGN KEY' Constraints
.........................................

MySQL supports foreign keys, which let you cross-reference related data
across tables, and foreign key constraints, which help keep this
spread-out data consistent. The essential syntax for a foreign key
constraint definition in a *Note `CREATE TABLE': create-table. or *Note
`ALTER TABLE': alter-table. statement looks like this:

     [CONSTRAINT [SYMBOL]] FOREIGN KEY
         [INDEX_NAME] (INDEX_COL_NAME, ...)
         REFERENCES TBL_NAME (INDEX_COL_NAME,...)
         [ON DELETE REFERENCE_OPTION]
         [ON UPDATE REFERENCE_OPTION]

     REFERENCE_OPTION:
         RESTRICT | CASCADE | SET NULL | NO ACTION

INDEX_NAME represents a foreign key ID. If given, this is ignored if an
index for the foreign key is defined explicitly. Otherwise, if MySQL
creates an index for the foreign key, it uses INDEX_NAME for the index
name.

Foreign keys definitions are subject to the following conditions:

   * Foreign key relationships involve a parent table that holds the
     central data values, and a child table with identical values
     pointing back to its parent. The `FOREIGN KEY' clause is specified
     in the child table. The parent and child tables must use the same
     storage engine. They must not be `TEMPORARY' tables.

   * Corresponding columns in the foreign key and the referenced key
     must have similar data types. _The size and sign of integer types
     must be the same_. The length of string types need not be the
     same. For nonbinary (character) string columns, the character set
     and collation must be the same.

   * MySQL requires indexes on foreign keys and referenced keys so that
     foreign key checks can be fast and not require a table scan. In
     the referencing table, there must be an index where the foreign
     key columns are listed as the _first_ columns in the same order.
     Such an index is created on the referencing table automatically if
     it does not exist. This index might be silently dropped later, if
     you create another index that can be used to enforce the foreign
     key constraint.  INDEX_NAME, if given, is used as described
     previously.

   * `InnoDB' permits a foreign key to reference any index column or
     group of columns. However, in the referenced table, there must be
     an index where the referenced columns are listed as the _first_
     columns in the same order.

   * Index prefixes on foreign key columns are not supported. One
     consequence of this is that *Note `BLOB': blob. and *Note `TEXT':
     blob. columns cannot be included in a foreign key because indexes
     on those columns must always include a prefix length.

   * If the `CONSTRAINT SYMBOL' clause is given, the SYMBOL value, if
     used, must be unique in the database. A duplicate SYMBOL will
     result in an error similar to: `ERROR 1005 (HY000): Can't create
     table 'test.#sql-211d_3' (errno: 121)'. If the clause is not
     given, or a SYMBOL is not included following the `CONSTRAINT'
     keyword, a name for the constraint is created automatically.

   * *Note `InnoDB': innodb-storage-engine. does not currently support
     foreign keys for tables with user-defined partitioning. This
     includes both parent and child tables.

* Referential Actions *

This section describes how foreign keys help guarantee referential
integrity.

For storage engines supporting foreign keys, MySQL rejects any *Note
`INSERT': insert. or *Note `UPDATE': update. operation that attempts to
create a foreign key value in a child table if there is no a matching
candidate key value in the parent table.

When an *Note `UPDATE': update. or *Note `DELETE': delete. operation
affects a key value in the parent table that has matching rows in the
child table, the result depends on the _referential action_ specified
using `ON UPDATE' and `ON DELETE' subclauses of the `FOREIGN KEY'
clause. MySQL supports five options regarding the action to be taken,
listed here:

   * `CASCADE': Delete or update the row from the parent table, and
     automatically delete or update the matching rows in the child
     table. Both `ON DELETE CASCADE' and `ON UPDATE CASCADE' are
     supported. Between two tables, do not define several `ON UPDATE
     CASCADE' clauses that act on the same column in the parent table
     or in the child table.

     *Note*:

     Currently, cascaded foreign key actions do not activate triggers.

   * `SET NULL': Delete or update the row from the parent table, and
     set the foreign key column or columns in the child table to
     `NULL'. Both `ON DELETE SET NULL' and `ON UPDATE SET NULL' clauses
     are supported.

     If you specify a `SET NULL' action, _make sure that you have not
     declared the columns in the child table as `NOT NULL'_.

   * `RESTRICT': Rejects the delete or update operation for the parent
     table. Specifying `RESTRICT' (or `NO ACTION') is the same as
     omitting the `ON DELETE' or `ON UPDATE' clause.

   * `NO ACTION': A keyword from standard SQL.  In MySQL, equivalent to
     `RESTRICT'. The MySQL Server rejects the delete or update
     operation for the parent table if there is a related foreign key
     value in the referenced table. Some database systems have deferred
     checks, and `NO ACTION' is a deferred check. In MySQL, foreign key
     constraints are checked immediately, so `NO ACTION' is the same as
     `RESTRICT'.

   * `SET DEFAULT': This action is recognized by the MySQL parser, but
     *Note `InnoDB': innodb-storage-engine.  rejects table definitions
     containing `ON DELETE SET DEFAULT' or `ON UPDATE SET DEFAULT'
     clauses.

For an `ON DELETE' or `ON UPDATE' that is not specified, the default
action is always `RESTRICT'.

MySQL supports foreign key references between one column and another
within a table. (A column cannot have a foreign key reference to
itself.) In these cases, `child table records' really refers to
dependent records within the same table.

* Examples of Foreign Key Clauses *

Here is a simple example that relates `parent' and `child' tables
through a single-column foreign key:

     CREATE TABLE parent (
         id INT NOT NULL,
         PRIMARY KEY (id)
     ) ENGINE=INNODB;

     CREATE TABLE child (
         id INT,
         parent_id INT,
         INDEX par_ind (parent_id),
         FOREIGN KEY (parent_id)
             REFERENCES parent(id)
             ON DELETE CASCADE
     ) ENGINE=INNODB;

A more complex example in which a `product_order' table has foreign
keys for two other tables. One foreign key references a two-column
index in the `product' table. The other references a single-column
index in the `customer' table:

     CREATE TABLE product (
         category INT NOT NULL, id INT NOT NULL,
         price DECIMAL,
         PRIMARY KEY(category, id)
     )   ENGINE=INNODB;

     CREATE TABLE customer (
         id INT NOT NULL,
         PRIMARY KEY (id)
     )   ENGINE=INNODB;

     CREATE TABLE product_order (
         no INT NOT NULL AUTO_INCREMENT,
         product_category INT NOT NULL,
         product_id INT NOT NULL,
         customer_id INT NOT NULL,

         PRIMARY KEY(no),
         INDEX (product_category, product_id),
         INDEX (customer_id),

         FOREIGN KEY (product_category, product_id)
           REFERENCES product(category, id)
           ON UPDATE CASCADE ON DELETE RESTRICT,

         FOREIGN KEY (customer_id)
           REFERENCES customer(id)
     )   ENGINE=INNODB;

* Adding foreign keys *

You can add a new foreign key constraint to an existing table by using
*Note `ALTER TABLE': alter-table. The syntax relating to foreign keys
for this statement is shown here:

     ALTER TABLE TBL_NAME
         ADD [CONSTRAINT [SYMBOL]] FOREIGN KEY
         [INDEX_NAME] (INDEX_COL_NAME, ...)
         REFERENCES TBL_NAME (INDEX_COL_NAME,...)
         [ON DELETE REFERENCE_OPTION]
         [ON UPDATE REFERENCE_OPTION]

The foreign key can be self referential (referring to the same table).
When you add a foreign key constraint to a table using *Note `ALTER
TABLE': alter-table, _remember to create the required indexes first._

* Dropping Foreign Keys *

You can also use *Note `ALTER TABLE': alter-table. to drop foreign
keys, using the syntax shown here:

     ALTER TABLE TBL_NAME DROP FOREIGN KEY FK_SYMBOL;

If the `FOREIGN KEY' clause included a `CONSTRAINT' name when you
created the foreign key, you can refer to that name to drop the foreign
key.  Otherwise, the FK_SYMBOL value is generated internally when the
foreign key is created. To find out the symbol value when you want to
drop a foreign key, use a *Note `SHOW CREATE TABLE': show-create-table.
statement, as shown here:

     mysql> SHOW CREATE TABLE ibtest11c\G
     *************************** 1. row ***************************
            Table: ibtest11c
     Create Table: CREATE TABLE `ibtest11c` (
       `A` int(11) NOT NULL auto_increment,
       `D` int(11) NOT NULL default '0',
       `B` varchar(200) NOT NULL default '',
       `C` varchar(175) default NULL,
       PRIMARY KEY  (`A`,`D`,`B`),
       KEY `B` (`B`,`C`),
       KEY `C` (`C`),
       CONSTRAINT `0_38775` FOREIGN KEY (`A`, `D`)
     REFERENCES `ibtest11a` (`A`, `D`)
     ON DELETE CASCADE ON UPDATE CASCADE,
       CONSTRAINT `0_38776` FOREIGN KEY (`B`, `C`)
     REFERENCES `ibtest11a` (`B`, `C`)
     ON DELETE CASCADE ON UPDATE CASCADE
     ) ENGINE=INNODB CHARSET=latin1
     1 row in set (0.01 sec)

     mysql> ALTER TABLE ibtest11c DROP FOREIGN KEY `0_38775`;

You cannot add a foreign key and drop a foreign key in the same *Note
`ALTER TABLE': alter-table. statement. A separate statements is
required for each operation.

If an *Note `ALTER TABLE': alter-table. statement results in changes to
column values (for example, because a column is truncated), MySQL's
foreign key constraint checks do not notice possible violations caused
by changing the values.

* Foreign Keys and Other MySQL Statements *

Table and column identifiers in a `FOREIGN KEY ...  REFERENCES ...'
clause can be quoted within backticks (``'). Alternatively, double
quotation marks (`"') can be used if the `ANSI_QUOTES' SQL mode is
enabled. The setting of the `lower_case_table_names' system variable is
also taken into account.

You can view a child table's foreign key definitions as part of the
output of the *Note `SHOW CREATE TABLE': show-create-table. statement:

     SHOW CREATE TABLE TBL_NAME;

You can also obtain information about foreign keys by querying the
*Note `INFORMATION_SCHEMA.KEY_COLUMN_USAGE': key-column-usage-table.
table.

*Note `mysqldump': mysqldump. produces correct definitions of tables in
the dump file, including the foreign keys for child tables.

To make it easier to reload dump files for tables that have foreign key
relationships, *Note `mysqldump': mysqldump.  automatically includes a
statement in the dump output to set `foreign_key_checks' to 0. This
avoids problems with tables having to be reloaded in a particular order
when the dump is reloaded. It is also possible to set this variable
manually:

     mysql> SET foreign_key_checks = 0;
     mysql> SOURCE DUMP_FILE_NAME;
     mysql> SET foreign_key_checks = 1;

This enables you to import the tables in any order if the dump file
contains tables that are not correctly ordered for foreign keys. It
also speeds up the import operation. Setting `foreign_key_checks' to 0
can also be useful for ignoring foreign key constraints during *Note
`LOAD DATA': load-data. and *Note `ALTER TABLE': alter-table.
operations. However, even if `foreign_key_checks = 0', MySQL does not
permit the creation of a foreign key constraint where a column
references a nonmatching column type. Also, if a table has foreign key
constraints, *Note `ALTER TABLE': alter-table. cannot be used to alter
the table to use another storage engine. To change the storage engine,
you must drop any foreign key constraints first.

You cannot issue *Note `DROP TABLE': drop-table. for a table that is
referenced by a `FOREIGN KEY' constraint, unless you do `SET
foreign_key_checks = 0'. When you drop a table, any constraints that
were defined in the statement used to create that table are also
dropped.

If you re-create a table that was dropped, it must have a definition
that conforms to the foreign key constraints referencing it. It must
have the correct column names and types, and it must have indexes on
the referenced keys, as stated earlier. If these are not satisfied,
MySQL returns Error 1005 and refers to Error 150 in the error message,
which means that a foreign key constraint was not correctly formed.
Similarly, if an *Note `ALTER TABLE': alter-table. fails due to Error
150, this means that a foreign key definition would be incorrectly
formed for the altered table.

For `InnoDB' tables, you can obtain a detailed explanation of the most
recent `InnoDB' foreign key error in the MySQL Server, by checking the
output of *Note `SHOW ENGINE INNODB STATUS': show-engine.

*Important*:

For users familiar with the ANSI/ISO SQL Standard, please note that no
storage engine, including `InnoDB', recognizes or enforces the `MATCH'
clause used in referential-integrity constraint definitions. Use of an
explicit `MATCH' clause will not have the specified effect, and also
causes `ON DELETE' and `ON UPDATE' clauses to be ignored. For these
reasons, specifying `MATCH' should be avoided.

The `MATCH' clause in the SQL standard controls how `NULL' values in a
composite (multiple-column) foreign key are handled when comparing to a
primary key. MySQL essentially implements the semantics defined by
`MATCH SIMPLE', which permit a foreign key to be all or partially
`NULL'. In that case, the (child table) row containing such a foreign
key is permitted to be inserted, and does not match any row in the
referenced (parent) table. It is possible to implement other semantics
using triggers.

Additionally, MySQL requires that the referenced columns be indexed for
performance reasons. However, the system does not enforce a requirement
that the referenced columns be `UNIQUE' or be declared `NOT NULL'. The
handling of foreign key references to nonunique keys or keys that
contain `NULL' values is not well defined for operations such as *Note
`UPDATE': update. or `DELETE CASCADE'. You are advised to use foreign
keys that reference only `UNIQUE' (including `PRIMARY') and `NOT NULL'
keys.

Furthermore, MySQL does not recognize or support `inline `REFERENCES'
specifications' (as defined in the SQL standard) where the references
are defined as part of the column specification. MySQL accepts
`REFERENCES' clauses only when specified as part of a separate `FOREIGN
KEY' specification. For storage engines that do not support foreign
keys (such as *Note `MyISAM': myisam-storage-engine.), MySQL Server
parses and ignores foreign key specifications.


File: manual.info,  Node: silent-column-changes,  Prev: create-table-foreign-keys,  Up: create-table

13.1.17.3 Silent Column Specification Changes
.............................................

In some cases, MySQL silently changes column specifications from those
given in a *Note `CREATE TABLE': create-table. or *Note `ALTER TABLE':
alter-table. statement. These might be changes to a data type, to
attributes associated with a data type, or to an index specification.

All changes are subject to the internal row-size limit of 65,535 bytes,
which may cause some attempts at data type changes to fail. See *Note
column-count-limit::.

   * *Note `TIMESTAMP': datetime. display sizes are discarded.

     Also note that *Note `TIMESTAMP': datetime.  columns are `NOT
     NULL' by default.

   * Columns that are part of a `PRIMARY KEY' are made `NOT NULL' even
     if not declared that way.

   * Trailing spaces are automatically deleted from *Note `ENUM': enum.
     and *Note `SET': set. member values when the table is created.

   * MySQL maps certain data types used by other SQL database vendors
     to MySQL types. See *Note other-vendor-data-types::.

   * If you include a `USING' clause to specify an index type that is
     not permitted for a given storage engine, but there is another
     index type available that the engine can use without affecting
     query results, the engine uses the available type.

   * If strict SQL mode is not enabled, a *Note `VARCHAR': char. column
     with a length specification greater than 65535 is converted to
     *Note `TEXT': blob, and a *Note `VARBINARY': binary-varbinary.
     column with a length specification greater than 65535 is converted
     to *Note `BLOB': blob. Otherwise, an error occurs in either of
     these cases.

   * Specifying the `CHARACTER SET binary' attribute for a character
     data type causes the column to be created as the corresponding
     binary data type: *Note `CHAR': char. becomes *Note `BINARY':
     binary-varbinary, *Note `VARCHAR': char. becomes *Note
     `VARBINARY': binary-varbinary, and *Note `TEXT': blob. becomes
     *Note `BLOB': blob. For the *Note `ENUM': enum. and *Note `SET':
     set. data types, this does not occur; they are created as
     declared. Suppose that you specify a table using this definition:

          CREATE TABLE t
          (
            c1 VARCHAR(10) CHARACTER SET binary,
            c2 TEXT CHARACTER SET binary,
            c3 ENUM('a','b','c') CHARACTER SET binary
          );

     The resulting table has this definition:

          CREATE TABLE t
          (
            c1 VARBINARY(10),
            c2 BLOB,
            c3 ENUM('a','b','c') CHARACTER SET binary
          );

To see whether MySQL used a data type other than the one you specified,
issue a *Note `DESCRIBE': describe. or *Note `SHOW CREATE TABLE':
show-create-table. statement after creating or altering the table.

Certain other data type changes can occur if you compress a table using
*Note `myisampack': myisampack. See *Note compressed-format::.


File: manual.info,  Node: create-tablespace,  Next: create-trigger,  Prev: create-table,  Up: sql-syntax-data-definition

13.1.18 `CREATE TABLESPACE' Syntax
----------------------------------

     CREATE TABLESPACE TABLESPACE_NAME
         ADD DATAFILE 'FILE_NAME'
         USE LOGFILE GROUP LOGFILE_GROUP
         [EXTENT_SIZE [=] EXTENT_SIZE]
         [INITIAL_SIZE [=] INITIAL_SIZE]
         [AUTOEXTEND_SIZE [=] AUTOEXTEND_SIZE]
         [MAX_SIZE [=] MAX_SIZE]
         [NODEGROUP [=] NODEGROUP_ID]
         [WAIT]
         [COMMENT [=] COMMENT_TEXT]
         ENGINE [=] ENGINE_NAME

This statement is used to create a tablespace, which can contain one or
more data files, providing storage space for tables. One data file is
created and added to the tablespace using this statement. Additional
data files may be added to the tablespace by using the *Note `ALTER
TABLESPACE': alter-tablespace.  statement (see *Note
alter-tablespace::). For rules covering the naming of tablespaces, see
*Note identifiers::.

*Note*:

All MySQL Cluster Disk Data objects share the same namespace.  This
means that _each Disk Data object_ must be uniquely named (and not
merely each Disk Data object of a given type). For example, you cannot
have a tablespace and a log file group with the same name, or a
tablespace and a data file with the same name.

A log file group of one or more `UNDO' log files must be assigned to
the tablespace to be created with the `USE LOGFILE GROUP' clause.
LOGFILE_GROUP must be an existing log file group created with *Note
`CREATE LOGFILE GROUP': create-logfile-group. (see *Note
create-logfile-group::).  Multiple tablespaces may use the same log
file group for `UNDO' logging.

The `EXTENT_SIZE' sets the size, in bytes, of the extents used by any
files belonging to the tablespace. The default value is 1M. The minimum
size is 32K, and theoretical maximum is 2G, although the practical
maximum size depends on a number of factors. In most cases, changing
the extent size does not have any measurable effect on performance, and
the default value is recommended for all but the most unusual
situations.

An _extent_ is a unit of disk space allocation. One extent is filled
with as much data as that extent can contain before another extent is
used. In theory, up to 65,535 (64K) extents may used per data file;
however, the recommended maximum is 32,768 (32K). The recommended
maximum size for a single data file is 32G--that is, 32K extents x 1 MB
per extent. In addition, once an extent is allocated to a given
partition, it cannot be used to store data from a different partition;
an extent cannot store data from more than one partition. This means,
for example that a tablespace having a single datafile whose
`INITIAL_SIZE' is 256 MB and whose `EXTENT_SIZE' is 128M has just two
extents, and so can be used to store data from at most two different
disk data table partitions.

You can see how many extents remain free in a given data file by
querying the *Note `INFORMATION_SCHEMA.FILES': files-table.  table, and
so derive an estimate for how much space remains free in the file. For
further discussion and examples, see *Note files-table::.

The `INITIAL_SIZE' parameter sets the data file's total size in bytes.
Once the file has been created, its size cannot be changed; however,
you can add more data files to the tablespace using `ALTER TABLESPACE
... ADD DATAFILE'. See *Note alter-tablespace::.

`INITIAL_SIZE' is optional; its default value is `128M'.

On 32-bit systems, the maximum supported value for `INITIAL_SIZE' is
`4G'. (Bug #29186)

When setting `EXTENT_SIZE' or `INITIAL_SIZE' (either or both), you may
optionally follow the number with a one-letter abbreviation for an
order of magnitude, similar to those used in `my.cnf'. Generally, this
is one of the letters `M' (for megabytes) or `G' (for gigabytes).

`INITIAL_SIZE', `EXTENT_SIZE', and `UNDO_BUFFER_SIZE' are subject to
rounding as follows:

   * `EXTENT_SIZE' and `UNDO_BUFFER_SIZE' are each rounded up to the
     nearest whole multiple of 32K.

   * `INITIAL_SIZE' is rounded _down_ to the nearest whole multiple of
     32K.

     For data files, _INITIAL_SIZE_ is subject to further rounding; the
     result just obtained is rounded up to the nearest whole multiple
     of `EXTENT_SIZE' (after any rounding).

The rounding just described is done explicitly, and a warning is issued
by the MySQL Server when any such rounding is performed.  The rounded
values are also used by the NDB kernel for calculating *Note
`INFORMATION_SCHEMA.FILES': files-table. column values and other
purposes. However, to avoid an unexpected result, we suggest that you
always use whole multiples of 32K in specifying these options.

`AUTOEXTEND_SIZE', `MAX_SIZE', `NODEGROUP', `WAIT', and `COMMENT' are
parsed but ignored, and so currently have no effect. These options are
intended for future expansion.

The `ENGINE' parameter determines the storage engine which uses this
tablespace, with ENGINE_NAME being the name of the storage engine.
Currently, ENGINE_NAME must be one of the values *Note `NDB':
mysql-cluster. or *Note `NDBCLUSTER': mysql-cluster.

When *Note `CREATE TABLESPACE': create-tablespace. is used with `ENGINE
= NDB', a tablespace and associated data file are created on each
Cluster data node. You can verify that the data files were created and
obtain information about them by querying the *Note
`INFORMATION_SCHEMA.FILES': files-table.  table. For example:

     mysql> SELECT LOGFILE_GROUP_NAME, FILE_NAME, EXTRA
         -> FROM INFORMATION_SCHEMA.FILES
         -> WHERE TABLESPACE_NAME = 'newts' AND FILE_TYPE = 'DATAFILE';
     +--------------------+-------------+----------------+
     | LOGFILE_GROUP_NAME | FILE_NAME   | EXTRA          |
     +--------------------+-------------+----------------+
     | lg_3               | newdata.dat | CLUSTER_NODE=3 |
     | lg_3               | newdata.dat | CLUSTER_NODE=4 |
     +--------------------+-------------+----------------+
     2 rows in set (0.01 sec)

(See *Note files-table::.)

*Note `CREATE TABLESPACE': create-tablespace. is useful only with Disk
Data storage for MySQL Cluster. See *Note mysql-cluster-disk-data::.


File: manual.info,  Node: create-trigger,  Next: create-view,  Prev: create-tablespace,  Up: sql-syntax-data-definition

13.1.19 `CREATE TRIGGER' Syntax
-------------------------------

     CREATE
         [DEFINER = { USER | CURRENT_USER }]
         TRIGGER TRIGGER_NAME
         TRIGGER_TIME TRIGGER_EVENT
         ON TBL_NAME FOR EACH ROW
         TRIGGER_BODY

     TRIGGER_TIME: { BEFORE | AFTER }

     TRIGGER_EVENT: { INSERT | UPDATE | DELETE }

This statement creates a new trigger. A trigger is a named database
object that is associated with a table, and that activates when a
particular event occurs for the table. The trigger becomes associated
with the table named TBL_NAME, which must refer to a permanent table.
You cannot associate a trigger with a `TEMPORARY' table or a view.

Trigger names exist in the schema namespace, meaning that all triggers
must have unique names within a schema. Triggers in different schemas
can have the same name.

This section describes *Note `CREATE TRIGGER': create-trigger. syntax.
For additional discussion, see *Note trigger-syntax::.

*Note `CREATE TRIGGER': create-trigger. requires the `TRIGGER'
privilege for the table associated with the trigger. The statement
might also require the `SUPER' privilege, depending on the `DEFINER'
value, as described later in this section. If binary logging is
enabled, *Note `CREATE TRIGGER': create-trigger. might require the
`SUPER' privilege, as described in *Note stored-programs-logging::.

The `DEFINER' clause determines the security context to be used when
checking access privileges at trigger activation time, as described
later in this section.

TRIGGER_TIME is the trigger action time. It can be `BEFORE' or `AFTER'
to indicate that the trigger activates before or after each row to be
modified.

TRIGGER_EVENT indicates the kind of operation that activates the
trigger. These TRIGGER_EVENT values are permitted:

   * *Note `INSERT': insert.: The trigger activates whenever a new row
     is inserted into the table; for example, through *Note `INSERT':
     insert, *Note `LOAD DATA': load-data, and *Note `REPLACE':
     replace. statements.

   * *Note `UPDATE': update.: The trigger activates whenever a row is
     modified; for example, through *Note `UPDATE': update. statements.

   * *Note `DELETE': delete.: The trigger activates whenever a row is
     deleted from the table; for example, through *Note `DELETE':
     delete. and *Note `REPLACE': replace. statements.  *Note `DROP
     TABLE': drop-table. and *Note `TRUNCATE TABLE': truncate-table.
     statements on the table do _not_ activate this trigger, because
     they do not use *Note `DELETE': delete.  Dropping a partition does
     not activate *Note `DELETE': delete. triggers, either.

The TRIGGER_EVENT does not represent a literal type of SQL statement
that activates the trigger so much as it represents a type of table
operation. For example, an *Note `INSERT': insert. trigger activates
not only for *Note `INSERT': insert. statements but also *Note `LOAD
DATA': load-data. statements because both statements insert rows into a
table.

A potentially confusing example of this is the `INSERT INTO ... ON
DUPLICATE KEY UPDATE ...' syntax: a `BEFORE INSERT' trigger activates
for every row, followed by either an `AFTER INSERT' trigger or both the
`BEFORE UPDATE' and `AFTER UPDATE' triggers, depending on whether there
was a duplicate key for the row.

*Note*:

Cascaded foreign key actions do not activate triggers.

There cannot be multiple triggers for a given table that have the same
trigger event and action time. For example, you cannot have two `BEFORE
UPDATE' triggers for a table. But you can have a `BEFORE UPDATE' and a
`BEFORE INSERT' trigger, or a `BEFORE UPDATE' and an `AFTER UPDATE'
trigger.

TRIGGER_BODY is the statement to execute when the trigger activates. To
execute multiple statements, use the *Note `BEGIN ... END': begin-end.
compound statement construct. This also enables you to use the same
statements that are permissible within stored routines. See *Note
begin-end::. Some statements are not permitted in triggers; see *Note
stored-program-restrictions::.

Within the trigger body, you can refer to columns in the subject table
(the table associated with the trigger) by using the aliases `OLD' and
`NEW'.  `OLD.COL_NAME' refers to a column of an existing row before it
is updated or deleted.  `NEW.COL_NAME' refers to the column of a new
row to be inserted or an existing row after it is updated.

MySQL stores the `sql_mode' system variable setting in effect when a
trigger is created, and always executes the trigger body with this
setting in force, _regardless of the current server SQL mode when the
trigger begins executing_.

The `DEFINER' clause specifies the MySQL account to be used when
checking access privileges at trigger activation time. If a USER value
is given, it should be a MySQL account specified as
`'USER_NAME'@'HOST_NAME'' (the same format used in the *Note `GRANT':
grant.  statement), `CURRENT_USER', or `CURRENT_USER()'. The default
`DEFINER' value is the user who executes the *Note `CREATE TRIGGER':
create-trigger. statement. This is the same as specifying `DEFINER =
CURRENT_USER' explicitly.

If you specify the `DEFINER' clause, these rules determine the valid
`DEFINER' user values:

   * If you do not have the `SUPER' privilege, the only permitted USER
     value is your own account, either specified literally or by using
     `CURRENT_USER'. You cannot set the definer to some other account.

   * If you have the `SUPER' privilege, you can specify any
     syntactically valid account name. If the account does not actually
     exist, a warning is generated.

   * Although it is possible to create a trigger with a nonexistent
     `DEFINER' account, it is not a good idea for such triggers to be
     activated until the account actually does exist. Otherwise, the
     behavior with respect to privilege checking is undefined.

MySQL takes the `DEFINER' user into account when checking trigger
privileges as follows:

   * At *Note `CREATE TRIGGER': create-trigger. time, the user who
     issues the statement must have the `TRIGGER' privilege.

   * At trigger activation time, privileges are checked against the
     `DEFINER' user. This user must have these privileges:

        * The `TRIGGER' privilege for the subject table.

        * The `SELECT' privilege for the subject table if references to
          table columns occur using `OLD.COL_NAME' or `NEW.COL_NAME' in
          the trigger body.

        * The `UPDATE' privilege for the subject table if table columns
          are targets of `SET NEW.COL_NAME = VALUE' assignments in the
          trigger body.

        * Whatever other privileges normally are required for the
          statements executed by the trigger.

For more information about trigger security, see *Note
stored-programs-security::.

Within a trigger body, the `CURRENT_USER()' function returns the
account used to check privileges at trigger activation time. This is
the `DEFINER' user, not the user whose actions caused the trigger to be
activated. For information about user auditing within triggers, see
*Note account-activity-auditing::.

If you use *Note `LOCK TABLES': lock-tables. to lock a table that has
triggers, the tables used within the trigger are also locked, as
described in *Note lock-tables-and-triggers::.

For additional discussion of trigger use, see *Note trigger-syntax::.


File: manual.info,  Node: create-view,  Next: drop-database,  Prev: create-trigger,  Up: sql-syntax-data-definition

13.1.20 `CREATE VIEW' Syntax
----------------------------

     CREATE
         [OR REPLACE]
         [ALGORITHM = {UNDEFINED | MERGE | TEMPTABLE}]
         [DEFINER = { USER | CURRENT_USER }]
         [SQL SECURITY { DEFINER | INVOKER }]
         VIEW VIEW_NAME [(COLUMN_LIST)]
         AS SELECT_STATEMENT
         [WITH [CASCADED | LOCAL] CHECK OPTION]

The *Note `CREATE VIEW': create-view. statement creates a new view, or
replaces an existing one if the `OR REPLACE' clause is given. If the
view does not exist, *Note `CREATE OR REPLACE VIEW': create-view. is
the same as *Note `CREATE VIEW': create-view. If the view does exist,
*Note `CREATE OR REPLACE VIEW': create-view. is the same as *Note
`ALTER VIEW': alter-view.

The SELECT_STATEMENT is a *Note `SELECT': select. statement that
provides the definition of the view. (When you select from the view,
you select in effect using the *Note `SELECT': select.  statement.)
SELECT_STATEMENT can select from base tables or other views.

The view definition is `frozen' at creation time, so changes to the
underlying tables afterward do not affect the view definition. For
example, if a view is defined as `SELECT *' on a table, new columns
added to the table later do not become part of the view.

The `ALGORITHM' clause affects how MySQL processes the view. The
`DEFINER' and `SQL SECURITY' clauses specify the security context to be
used when checking access privileges at view invocation time. The `WITH
CHECK OPTION' clause can be given to constrain inserts or updates to
rows in tables referenced by the view. These clauses are described
later in this section.

The *Note `CREATE VIEW': create-view. statement requires the `CREATE
VIEW' privilege for the view, and some privilege for each column
selected by the *Note `SELECT': select. statement. For columns used
elsewhere in the *Note `SELECT': select. statement you must have the
`SELECT' privilege.  If the `OR REPLACE' clause is present, you must
also have the `DROP' privilege for the view. *Note `CREATE VIEW':
create-view. might also require the `SUPER' privilege, depending on the
`DEFINER' value, as described later in this section.

When a view is referenced, privilege checking occurs as described later
in this section.

A view belongs to a database. By default, a new view is created in the
default database. To create the view explicitly in a given database,
specify the name as DB_NAME.VIEW_NAME when you create it:

     mysql> CREATE VIEW test.v AS SELECT * FROM t;

Within a database, base tables and views share the same namespace, so a
base table and a view cannot have the same name.

Columns retrieved by the *Note `SELECT': select.  statement can be
simple references to table columns. They can also be expressions that
use functions, constant values, operators, and so forth.

Views must have unique column names with no duplicates, just like base
tables. By default, the names of the columns retrieved by the *Note
`SELECT': select. statement are used for the view column names. To
define explicit names for the view columns, the optional COLUMN_LIST
clause can be given as a list of comma-separated identifiers. The
number of names in COLUMN_LIST must be the same as the number of
columns retrieved by the *Note `SELECT': select. statement.

Unqualified table or view names in the *Note `SELECT': select.
statement are interpreted with respect to the default database. A view
can refer to tables or views in other databases by qualifying the table
or view name with the proper database name.

A view can be created from many kinds of *Note `SELECT': select.
statements. It can refer to base tables or other views. It can use
joins, *Note `UNION': union, and subqueries. The *Note `SELECT':
select. need not even refer to any tables. The following example
defines a view that selects two columns from another table, as well as
an expression calculated from those columns:

     mysql> CREATE TABLE t (qty INT, price INT);
     mysql> INSERT INTO t VALUES(3, 50);
     mysql> CREATE VIEW v AS SELECT qty, price, qty*price AS value FROM t;
     mysql> SELECT * FROM v;
     +------+-------+-------+
     | qty  | price | value |
     +------+-------+-------+
     |    3 |    50 |   150 |
     +------+-------+-------+

A view definition is subject to the following restrictions:

   * The *Note `SELECT': select. statement cannot contain a subquery in
     the `FROM' clause.

   * The *Note `SELECT': select. statement cannot refer to system or
     user variables.

   * Within a stored program, the definition cannot refer to program
     parameters or local variables.

   * The *Note `SELECT': select. statement cannot refer to prepared
     statement parameters.

   * Any table or view referred to in the definition must exist.
     However, after a view has been created, it is possible to drop a
     table or view that the definition refers to. In this case, use of
     the view results in an error. To check a view definition for
     problems of this kind, use the *Note `CHECK TABLE': check-table.
     statement.

   * The definition cannot refer to a `TEMPORARY' table, and you cannot
     create a `TEMPORARY' view.

   * Any tables named in the view definition must exist at definition
     time.

   * You cannot associate a trigger with a view.

   * Aliases for column names in the *Note `SELECT': select. statement
     are checked against the maximum column length of 64 characters
     (not the maximum alias length of 256 characters).

`ORDER BY' is permitted in a view definition, but it is ignored if you
select from a view using a statement that has its own `ORDER BY'.

For other options or clauses in the definition, they are added to the
options or clauses of the statement that references the view, but the
effect is undefined. For example, if a view definition includes a
`LIMIT' clause, and you select from the view using a statement that has
its own `LIMIT' clause, it is undefined which limit applies. This same
principle applies to options such as `ALL', `DISTINCT', or
`SQL_SMALL_RESULT' that follow the *Note `SELECT': select. keyword, and
to clauses such as `INTO', `FOR UPDATE', `LOCK IN SHARE MODE', and
`PROCEDURE'.

If you create a view and then change the query processing environment
by changing system variables, that may affect the results that you get
from the view:

     mysql> CREATE VIEW v (mycol) AS SELECT 'abc';
     Query OK, 0 rows affected (0.01 sec)

     mysql> SET sql_mode = '';
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT "mycol" FROM v;
     +-------+
     | mycol |
     +-------+
     | mycol |
     +-------+
     1 row in set (0.01 sec)

     mysql> SET sql_mode = 'ANSI_QUOTES';
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT "mycol" FROM v;
     +-------+
     | mycol |
     +-------+
     | abc   |
     +-------+
     1 row in set (0.00 sec)

The `DEFINER' and `SQL SECURITY' clauses determine which MySQL account
to use when checking access privileges for the view when a statement is
executed that references the view. The valid `SQL SECURITY'
characteristic values are `DEFINER' and `INVOKER'. These indicate that
the required privileges must be held by the user who defined or invoked
the view, respectively. The default `SQL SECURITY' value is `DEFINER'.

If a USER value is given for the `DEFINER' clause, it should be a MySQL
account specified as `'USER_NAME'@'HOST_NAME'' (the same format used in
the *Note `GRANT': grant.  statement), `CURRENT_USER', or
`CURRENT_USER()'. The default `DEFINER' value is the user who executes
the *Note `CREATE VIEW': create-view. statement. This is the same as
specifying `DEFINER = CURRENT_USER' explicitly.

If you specify the `DEFINER' clause, these rules determine the valid
`DEFINER' user values:

   * If you do not have the `SUPER' privilege, the only valid USER
     value is your own account, either specified literally or by using
     `CURRENT_USER'. You cannot set the definer to some other account.

   * If you have the `SUPER' privilege, you can specify any
     syntactically valid account name. If the account does not actually
     exist, a warning is generated.

   * Although it is possible to create a view with a nonexistent
     `DEFINER' account, an error occurs when the view is referenced if
     the `SQL SECURITY' value is `DEFINER' but the definer account does
     not exist.

For more information about view security, see *Note
stored-programs-security::.

Within a view definition, `CURRENT_USER' returns the view's `DEFINER'
value by default. For views defined with the `SQL SECURITY INVOKER'
characteristic, `CURRENT_USER' returns the account for the view's
invoker. For information about user auditing within views, see *Note
account-activity-auditing::.

Within a stored routine that is defined with the `SQL SECURITY DEFINER'
characteristic, `CURRENT_USER' returns the routine's `DEFINER' value.
This also affects a view defined within such a routine, if the view
definition contains a `DEFINER' value of `CURRENT_USER'.

View privileges are checked like this:

   * At view definition time, the view creator must have the privileges
     needed to use the top-level objects accessed by the view. For
     example, if the view definition refers to table columns, the
     creator must have some privilege for each column in the select
     list of the definition, and the `SELECT' privilege for each column
     used elsewhere in the definition. If the definition refers to a
     stored function, only the privileges needed to invoke the function
     can be checked. The privileges required at function invocation
     time can be checked only as it executes: For different
     invocations, different execution paths within the function might
     be taken.

   * The user who references a view must have appropriate privileges to
     access it (`SELECT' to select from it, `INSERT' to insert into it,
     and so forth.)

   * When a view has been referenced, privileges for objects accessed
     by the view are checked against the privileges held by the view
     `DEFINER' account or invoker, depending on whether the `SQL
     SECURITY' characteristic is `DEFINER' or `INVOKER', respectively.

   * If reference to a view causes execution of a stored function,
     privilege checking for statements executed within the function
     depend on whether the function `SQL SECURITY' characteristic is
     `DEFINER' or `INVOKER'. If the security characteristic is
     `DEFINER', the function runs with the privileges of the `DEFINER'
     account. If the characteristic is `INVOKER', the function runs
     with the privileges determined by the view's `SQL SECURITY'
     characteristic.

Example: A view might depend on a stored function, and that function
might invoke other stored routines. For example, the following view
invokes a stored function `f()':

     CREATE VIEW v AS SELECT * FROM t WHERE t.id = f(t.name);

Suppose that `f()' contains a statement such as this:

     IF name IS NULL then
       CALL p1();
     ELSE
       CALL p2();
     END IF;

The privileges required for executing statements within `f()' need to
be checked when `f()' executes. This might mean that privileges are
needed for `p1()' or `p2()', depending on the execution path within
`f()'.  Those privileges must be checked at runtime, and the user who
must possess the privileges is determined by the `SQL SECURITY' values
of the view `v' and the function `f()'.

The `DEFINER' and `SQL SECURITY' clauses for views are extensions to
standard SQL. In standard SQL, views are handled using the rules for
`SQL SECURITY DEFINER'. The standard says that the definer of the view,
which is the same as the owner of the view's schema, gets applicable
privileges on the view (for example, `SELECT') and may grant them. MySQL
has no concept of a schema `owner', so MySQL adds a clause to identify
the definer. The `DEFINER' clause is an extension where the intent is
to have what the standard has; that is, a permanent record of who
defined the view.  This is why the default `DEFINER' value is the
account of the view creator.

The optional `ALGORITHM' clause is a MySQL extension to standard SQL.
It affects how MySQL processes the view. `ALGORITHM' takes three values:
`MERGE', `TEMPTABLE', or `UNDEFINED'. The default algorithm is
`UNDEFINED' if no `ALGORITHM' clause is present. For more information,
see *Note view-algorithms::.

Some views are updatable. That is, you can use them in statements such
as *Note `UPDATE': update, *Note `DELETE': delete, or *Note `INSERT':
insert. to update the contents of the underlying table. For a view to
be updatable, there must be a one-to-one relationship between the rows
in the view and the rows in the underlying table. There are also
certain other constructs that make a view nonupdatable.

The `WITH CHECK OPTION' clause can be given for an updatable view to
prevent inserts or updates to rows except those for which the `WHERE'
clause in the SELECT_STATEMENT is true.

In a `WITH CHECK OPTION' clause for an updatable view, the `LOCAL' and
`CASCADED' keywords determine the scope of check testing when the view
is defined in terms of another view. The `LOCAL' keyword restricts the
`CHECK OPTION' only to the view being defined. `CASCADED' causes the
checks for underlying views to be evaluated as well. When neither
keyword is given, the default is `CASCADED'.

For more information about updatable views and the `WITH CHECK OPTION'
clause, see *Note view-updatability::.


File: manual.info,  Node: drop-database,  Next: drop-event,  Prev: create-view,  Up: sql-syntax-data-definition

13.1.21 `DROP DATABASE' Syntax
------------------------------

     DROP {DATABASE | SCHEMA} [IF EXISTS] DB_NAME

*Note `DROP DATABASE': drop-database. drops all tables in the database
and deletes the database. Be _very_ careful with this statement! To use
*Note `DROP DATABASE': drop-database, you need the `DROP' privilege on
the database.  *Note `DROP SCHEMA': drop-database. is a synonym for
*Note `DROP DATABASE': drop-database.

*Important*:

When a database is dropped, user privileges on the database are _not_
automatically dropped. See *Note grant::.

`IF EXISTS' is used to prevent an error from occurring if the database
does not exist.

If the default database is dropped, the default database is unset (the
`DATABASE()' function returns `NULL').

If you use *Note `DROP DATABASE': drop-database. on a symbolically
linked database, both the link and the original database are deleted.

*Note `DROP DATABASE': drop-database. returns the number of tables that
were removed. This corresponds to the number of `.frm' files removed.

The *Note `DROP DATABASE': drop-database. statement removes from the
given database directory those files and directories that MySQL itself
may create during normal operation:

   * All files with the following extensions.

     The *Note `DROP DATABASE': drop-database.  statement removes files
     with extension types shown in this table. Extensions are listed in
     alphabetical order from left to right.

     `.BAK'  `.DAT'  `.HSH'  `.MRG'
     `.MYD'  `.MYI'  `.TRG'  `.TRN'
     `.db'   `.frm'  `.ibd'  `.ndb'
     `.par'                  

   * The `db.opt' file, if it exists.

If other files or directories remain in the database directory after
MySQL removes those just listed, the database directory cannot be
removed. In this case, you must remove any remaining files or
directories manually and issue the *Note `DROP DATABASE':
drop-database. statement again.

You can also drop databases with *Note `mysqladmin': mysqladmin.  See
*Note mysqladmin::.


File: manual.info,  Node: drop-event,  Next: drop-function,  Prev: drop-database,  Up: sql-syntax-data-definition

13.1.22 `DROP EVENT' Syntax
---------------------------

     DROP EVENT [IF EXISTS] EVENT_NAME

This statement drops the event named EVENT_NAME. The event immediately
ceases being active, and is deleted completely from the server.

If the event does not exist, the error `ERROR 1517 (HY000): Unknown
event 'EVENT_NAME'' results. You can override this and cause the
statement to generate a warning for nonexistent events instead using
`IF EXISTS'.

This statement requires the `EVENT' privilege for the schema to which
the event to be dropped belongs.


File: manual.info,  Node: drop-function,  Next: drop-index,  Prev: drop-event,  Up: sql-syntax-data-definition

13.1.23 `DROP FUNCTION' Syntax
------------------------------

The *Note `DROP FUNCTION': drop-function. statement is used to drop
stored functions and user-defined functions (UDFs):

   * For information about dropping stored functions, see *Note
     drop-procedure::.

   * For information about dropping user-defined functions, see *Note
     drop-function-udf::.


File: manual.info,  Node: drop-index,  Next: drop-logfile-group,  Prev: drop-function,  Up: sql-syntax-data-definition

13.1.24 `DROP INDEX' Syntax
---------------------------

     DROP [ONLINE|OFFLINE] INDEX INDEX_NAME ON TBL_NAME

*Note `DROP INDEX': drop-index. drops the index named INDEX_NAME from
the table TBL_NAME. This statement is mapped to an *Note `ALTER TABLE':
alter-table. statement to drop the index. See *Note alter-table::.

To drop a primary key, the index name is always `PRIMARY', which must
be specified as a quoted identifier because `PRIMARY' is a reserved
word:

     DROP INDEX `PRIMARY` ON t;

Indexes on variable-width columns of *Note `NDBCLUSTER': mysql-cluster.
tables are dropped online; that is, without any table copying. The
table is not locked against access from other MySQL Cluster API nodes,
although it is locked against other operations on the _same_ API node
for the duration of the operation. This is done automatically by the
server whenever it determines that it is possible to do so; you do not
have to use any special SQL syntax or server options to cause it to
happen.

In standard MySQL 5.5 releases, it is not possible to override the
server when it determines that an index is to be dropped without table
copying. In MySQL Cluster, you can drop indexes offline (which causes
the table to be locked for all API nodes in the cluster) using the
`OFFLINE' keyword. The rules and limitations governing `DROP OFFLINE
INDEX' and `DROP ONLINE INDEX' are the same as for `ALTER OFFLINE TABLE
... DROP INDEX' and `ALTER ONLINE TABLE ... DROP INDEX'. You cannot
cause the noncopying dropping of an index that would normally be
dropped offline by using the `ONLINE' keyword: If it is not possible to
perform the `DROP' operation without table copying, the server ignores
the `ONLINE' keyword. For more information, see *Note
alter-table-online-operations::.

*Note*:

The `ONLINE' and `OFFLINE' keywords are available only in MySQL
Cluster; attempting to use these keywords in standard MySQL Server 5.5
releases results in a syntax error.


File: manual.info,  Node: drop-logfile-group,  Next: drop-procedure,  Prev: drop-index,  Up: sql-syntax-data-definition

13.1.25 `DROP LOGFILE GROUP' Syntax
-----------------------------------

     DROP LOGFILE GROUP LOGFILE_GROUP
         ENGINE [=] ENGINE_NAME

This statement drops the log file group named LOGFILE_GROUP. The log
file group must already exist or an error results. (For information on
creating log file groups, see *Note create-logfile-group::.)

*Important*:

Before dropping a log file group, you must drop all tablespaces that
use that log file group for `UNDO' logging.

The required `ENGINE' clause provides the name of the storage engine
used by the log file group to be dropped.  Currently, the only
permitted values for ENGINE_NAME are *Note `NDB': mysql-cluster. and
*Note `NDBCLUSTER': mysql-cluster.

*Note `DROP LOGFILE GROUP': drop-logfile-group. is useful only with
Disk Data storage for MySQL Cluster. See *Note
mysql-cluster-disk-data::.


File: manual.info,  Node: drop-procedure,  Next: drop-server,  Prev: drop-logfile-group,  Up: sql-syntax-data-definition

13.1.26 `DROP PROCEDURE' and `DROP FUNCTION' Syntax
---------------------------------------------------

     DROP {PROCEDURE | FUNCTION} [IF EXISTS] SP_NAME

This statement is used to drop a stored procedure or function.  That
is, the specified routine is removed from the server. You must have the
`ALTER ROUTINE' privilege for the routine. (If the
`automatic_sp_privileges' system variable is enabled, that privilege
and `EXECUTE' are granted automatically to the routine creator when the
routine is created and dropped from the creator when the routine is
dropped. See *Note stored-routines-privileges::.)

The `IF EXISTS' clause is a MySQL extension. It prevents an error from
occurring if the procedure or function does not exist. A warning is
produced that can be viewed with *Note `SHOW WARNINGS': show-warnings.

*Note `DROP FUNCTION': drop-function. is also used to drop user-defined
functions (see *Note drop-function-udf::).


File: manual.info,  Node: drop-server,  Next: drop-table,  Prev: drop-procedure,  Up: sql-syntax-data-definition

13.1.27 `DROP SERVER' Syntax
----------------------------

     DROP SERVER [ IF EXISTS ] SERVER_NAME

Drops the server definition for the server named `SERVER_NAME'. The
corresponding row in the `mysql.servers' table is deleted. This
statement requires the `SUPER' privilege.

Dropping a server for a table does not affect any `FEDERATED' tables
that used this connection information when they were created. See *Note
create-server::.

`DROP SERVER' does not cause an automatic commit.

In MySQL 5.5, `DROP SERVER' is not written to the binary log,
regardless of the logging format that is in use.


File: manual.info,  Node: drop-table,  Next: drop-tablespace,  Prev: drop-server,  Up: sql-syntax-data-definition

13.1.28 `DROP TABLE' Syntax
---------------------------

     DROP [TEMPORARY] TABLE [IF EXISTS]
         TBL_NAME [, TBL_NAME] ...
         [RESTRICT | CASCADE]

*Note `DROP TABLE': drop-table. removes one or more tables. You must
have the `DROP' privilege for each table. All table data and the table
definition are _removed_, so _be careful_ with this statement! If any
of the tables named in the argument list do not exist, MySQL returns an
error indicating by name which nonexisting tables it was unable to drop,
but it also drops all of the tables in the list that do exist.

*Important*:

When a table is dropped, user privileges on the table are _not_
automatically dropped. See *Note grant::.

Note that for a partitioned table, *Note `DROP TABLE': drop-table.
permanently removes the table definition, all of its partitions, and
all of the data which was stored in those partitions. It also removes
the partitioning definition (`.par') file associated with the dropped
table.

Use `IF EXISTS' to prevent an error from occurring for tables that do
not exist. A `NOTE' is generated for each nonexistent table when using
`IF EXISTS'. See *Note show-warnings::.

`RESTRICT' and `CASCADE' are permitted to make porting easier. In MySQL
5.5, they do nothing.

*Note*:

*Note `DROP TABLE': drop-table. automatically commits the current
active transaction, unless you use the `TEMPORARY' keyword.

The `TEMPORARY' keyword has the following effects:

   * The statement drops only `TEMPORARY' tables.

   * The statement does not end an ongoing transaction.

   * No access rights are checked. (A `TEMPORARY' table is visible only
     to the session that created it, so no check is necessary.)

Using `TEMPORARY' is a good way to ensure that you do not accidentally
drop a non-`TEMPORARY' table.


File: manual.info,  Node: drop-tablespace,  Next: drop-trigger,  Prev: drop-table,  Up: sql-syntax-data-definition

13.1.29 `DROP TABLESPACE' Syntax
--------------------------------

     DROP TABLESPACE TABLESPACE_NAME
         ENGINE [=] ENGINE_NAME

This statement drops a tablespace that was previously created using
*Note `CREATE TABLESPACE': create-tablespace. (see *Note
create-tablespace::).

*Important*:

The tablespace to be dropped must not contain any data files; in other
words, before you can drop a tablespace, you must first drop each of
its data files using `ALTER TABLESPACE ...  DROP DATAFILE' (see *Note
alter-tablespace::).

The `ENGINE' clause (required) specifies the storage engine used by the
tablespace. Currently, the only accepted values for ENGINE_NAME are
*Note `NDB': mysql-cluster. and *Note `NDBCLUSTER': mysql-cluster.

*Note `DROP TABLESPACE': drop-tablespace. is useful only with Disk Data
storage for MySQL Cluster. See *Note mysql-cluster-disk-data::.


File: manual.info,  Node: drop-trigger,  Next: drop-view,  Prev: drop-tablespace,  Up: sql-syntax-data-definition

13.1.30 `DROP TRIGGER' Syntax
-----------------------------

     DROP TRIGGER [IF EXISTS] [SCHEMA_NAME.]TRIGGER_NAME

This statement drops a trigger. The schema (database) name is optional.
If the schema is omitted, the trigger is dropped from the default
schema. *Note `DROP TRIGGER': drop-trigger.  requires the `TRIGGER'
privilege for the table associated with the trigger.

Use `IF EXISTS' to prevent an error from occurring for a trigger that
does not exist. A `NOTE' is generated for a nonexistent trigger when
using `IF EXISTS'. See *Note show-warnings::.

Triggers for a table are also dropped if you drop the table.

*Note*:

When upgrading from a version of MySQL older than MySQL 5.0.10 to
5.0.10 or newer--including all MySQL 5.5 releases--you must drop all
triggers and re-create them.  Otherwise, *Note `DROP TRIGGER':
drop-trigger. does not work for older triggers after the upgrade. See
Upgrading from MySQL 4.1 to 5.0
(http://dev.mysql.com/doc/refman/5.0/en/upgrading-from-previous-series.html),
for a suggested upgrade procedure.


File: manual.info,  Node: drop-view,  Next: rename-table,  Prev: drop-trigger,  Up: sql-syntax-data-definition

13.1.31 `DROP VIEW' Syntax
--------------------------

     DROP VIEW [IF EXISTS]
         VIEW_NAME [, VIEW_NAME] ...
         [RESTRICT | CASCADE]

*Note `DROP VIEW': drop-view. removes one or more views. You must have
the `DROP' privilege for each view. If any of the views named in the
argument list do not exist, MySQL returns an error indicating by name
which nonexisting views it was unable to drop, but it also drops all of
the views in the list that do exist.

The `IF EXISTS' clause prevents an error from occurring for views that
don't exist. When this clause is given, a `NOTE' is generated for each
nonexistent view.  See *Note show-warnings::.

`RESTRICT' and `CASCADE', if given, are parsed and ignored.


File: manual.info,  Node: rename-table,  Next: truncate-table,  Prev: drop-view,  Up: sql-syntax-data-definition

13.1.32 `RENAME TABLE' Syntax
-----------------------------

     RENAME TABLE TBL_NAME TO NEW_TBL_NAME
         [, TBL_NAME2 TO NEW_TBL_NAME2] ...

This statement renames one or more tables.

The rename operation is done atomically, which means that no other
session can access any of the tables while the rename is running.  For
example, if you have an existing table `old_table', you can create
another table `new_table' that has the same structure but is empty, and
then replace the existing table with the empty one as follows (assuming
that `backup_table' does not already exist):

     CREATE TABLE new_table (...);
     RENAME TABLE old_table TO backup_table, new_table TO old_table;

If the statement renames more than one table, renaming operations are
done from left to right. If you want to swap two table names, you can
do so like this (assuming that `tmp_table' does not already exist):

     RENAME TABLE old_table TO tmp_table,
                  new_table TO old_table,
                  tmp_table TO new_table;

As long as two databases are on the same file system, you can use *Note
`RENAME TABLE': rename-table. to move a table from one database to
another:

     RENAME TABLE CURRENT_DB.TBL_NAME TO OTHER_DB.TBL_NAME;

If there are any triggers associated with a table which is moved to a
different database using *Note `RENAME TABLE': rename-table, then the
statement fails with the error `Trigger in wrong schema'.

*Note `RENAME TABLE': rename-table. also works for views, as long as
you do not try to rename a view into a different database.

Any privileges granted specifically for the renamed table or view are
not migrated to the new name. They must be changed manually.

When you execute `RENAME', you cannot have any locked tables or active
transactions. You must also have the `ALTER' and `DROP' privileges on
the original table, and the `CREATE' and `INSERT' privileges on the new
table.

If MySQL encounters any errors in a multiple-table rename, it does a
reverse rename for all renamed tables to return everything to its
original state.

You cannot use `RENAME' to rename a `TEMPORARY' table. However, you can
use *Note `ALTER TABLE': alter-table. instead:

     mysql> ALTER TABLE orig_name RENAME new_name;


File: manual.info,  Node: truncate-table,  Prev: rename-table,  Up: sql-syntax-data-definition

13.1.33 `TRUNCATE TABLE' Syntax
-------------------------------

     TRUNCATE [TABLE] TBL_NAME

*Note `TRUNCATE TABLE': truncate-table. empties a table completely. It
requires the `DROP' privilege.

Logically, *Note `TRUNCATE TABLE': truncate-table. is similar to a
*Note `DELETE': delete. statement that deletes all rows, or a sequence
of *Note `DROP TABLE': drop-table. and *Note `CREATE TABLE':
create-table.  statements. To achieve high performance, it bypasses the
DML method of deleting data. Thus, it cannot be rolled back, it does
not cause `ON DELETE' triggers to fire, and it cannot be performed for
`InnoDB' tables with parent-child foreign key relationships.

Although *Note `TRUNCATE TABLE': truncate-table. is similar to *Note
`DELETE': delete, it is classified as a DDL statement rather than a DML
statement. It differs from *Note `DELETE': delete. in the following
ways in MySQL 5.5:

   * Truncate operations drop and re-create the table, which is much
     faster than deleting rows one by one, particularly for large
     tables.

   * Truncate operations cause an implicit commit, and so cannot be
     rolled back.

   * Truncation operations cannot be performed if the session holds an
     active table lock.

   * *Note `TRUNCATE TABLE': truncate-table. fails for an `InnoDB'
     table if there are any `FOREIGN KEY' constraints from other tables
     that reference the table. Foreign key constraints between columns
     of the same table are permitted.

   * Truncation operations do not return a meaningful value for the
     number of deleted rows. The usual result is `0 rows affected,'
     which should be interpreted as `no information.'

   * As long as the table format file `TBL_NAME.frm' is valid, the
     table can be re-created as an empty table with *Note `TRUNCATE
     TABLE': truncate-table, even if the data or index files have
     become corrupted.

   * Any `AUTO_INCREMENT' value is reset to its start value. This is
     true even for `MyISAM' and `InnoDB', which normally do not reuse
     sequence values.

   * When used with partitioned tables, *Note `TRUNCATE TABLE':
     truncate-table. preserves the partitioning; that is, the data and
     index files are dropped and re-created, while the partition
     definitions (`.par') file is unaffected.

   * The *Note `TRUNCATE TABLE': truncate-table. statement does not
     invoke `ON DELETE' triggers.

*Note `TRUNCATE TABLE': truncate-table. for a table closes all handlers
for the table that were opened with *Note `HANDLER OPEN': handler.

*Note `TRUNCATE TABLE': truncate-table. is treated for purposes of
binary logging and replication as *Note `DROP TABLE': drop-table.
followed by *Note `CREATE TABLE': create-table.--that is, as DDL rather
than DML. This is due to the fact that, when using *Note `InnoDB':
innodb-storage-engine. and other transactional storage engines where
the transaction isolation level does not permit statement-based logging
(`READ COMMITTED' or `READ UNCOMMITTED'), the statement was not logged
and replicated when using `STATEMENT' or `MIXED' logging mode. (Bug
#36763) However, it is still applied on replication slaves using *Note
`InnoDB': innodb-storage-engine. in the manner described previously.

*Note `TRUNCATE TABLE': truncate-table. can be used with Performance
Schema summary tables, but the effect is to reset the summary columns
to 0 or `NULL', not to remove rows. See *Note
performance-schema-summary-tables::.


File: manual.info,  Node: sql-syntax-data-manipulation,  Next: sql-syntax-transactions,  Prev: sql-syntax-data-definition,  Up: sql-syntax

13.2 Data Manipulation Statements
=================================

* Menu:

* call::                         `CALL' Syntax
* delete::                       `DELETE' Syntax
* do::                           `DO' Syntax
* handler::                      `HANDLER' Syntax
* insert::                       `INSERT' Syntax
* load-data::                    `LOAD DATA INFILE' Syntax
* load-xml::                     `LOAD XML' Syntax
* replace::                      `REPLACE' Syntax
* select::                       `SELECT' Syntax
* subqueries::                   Subquery Syntax
* update::                       `UPDATE' Syntax


File: manual.info,  Node: call,  Next: delete,  Prev: sql-syntax-data-manipulation,  Up: sql-syntax-data-manipulation

13.2.1 `CALL' Syntax
--------------------

     CALL SP_NAME([PARAMETER[,...]])
     CALL SP_NAME[()]

The *Note `CALL': call. statement invokes a stored procedure that was
defined previously with *Note `CREATE PROCEDURE': create-procedure.

Stored procedures that take no arguments can be invoked without
parentheses. That is, `CALL p()' and `CALL p' are equivalent.

*Note `CALL': call. can pass back values to its caller using parameters
that are declared as `OUT' or `INOUT' parameters.  When the procedure
returns, a client program can also obtain the number of rows affected
for the final statement executed within the routine: At the SQL level,
call the `ROW_COUNT()' function; from the C API, call the *Note
`mysql_affected_rows()': mysql-affected-rows. function.

To get back a value from a procedure using an `OUT' or `INOUT'
parameter, pass the parameter by means of a user variable, and then
check the value of the variable after the procedure returns. (If you are
calling the procedure from within another stored procedure or function,
you can also pass a routine parameter or local routine variable as an
`IN' or `INOUT' parameter.) For an `INOUT' parameter, initialize its
value before passing it to the procedure. The following procedure has
an `OUT' parameter that the procedure sets to the current server
version, and an `INOUT' value that the procedure increments by one from
its current value:

     CREATE PROCEDURE p (OUT ver_param VARCHAR(25), INOUT incr_param INT)
     BEGIN
       # Set value of OUT parameter
       SELECT VERSION() INTO ver_param;
       # Increment value of INOUT parameter
       SET incr_param = incr_param + 1;
     END;

Before calling the procedure, initialize the variable to be passed as
the `INOUT' parameter. After calling the procedure, the values of the
two variables will have been set or modified:

     mysql> SET @increment = 10;
     mysql> CALL p(@version, @increment);
     mysql> SELECT @version, @increment;
     +--------------+------------+
     | @version     | @increment |
     +--------------+------------+
     | 5.5.3-m3-log |         11 |
     +--------------+------------+

In prepared *Note `CALL': call. statements used with *Note `PREPARE':
prepare. and *Note `EXECUTE': execute, placeholders can be used for
`IN' parameters. For `OUT' and `INOUT' parameters, placeholder support
is available as of MySQL 5.5.3. These types of parameters can be used
as follows:

     mysql> SET @increment = 10;
     mysql> PREPARE s FROM 'CALL p(?, ?)';
     mysql> EXECUTE s USING @version, @increment;
     mysql> SELECT @version, @increment;
     +--------------+------------+
     | @version     | @increment |
     +--------------+------------+
     | 5.5.3-m3-log |         11 |
     +--------------+------------+

Before MySQL 5.5.3, placeholder support is not available for `OUT' or
`INOUT' parameters. To work around this limitation for `OUT' and
`INOUT' parameters, forego the use of placeholders; instead, refer to
user variables in the *Note `CALL': call. statement itself and do not
specify them in the *Note `EXECUTE': execute.  statement:

     mysql> SET @increment = 10;
     mysql> PREPARE s FROM 'CALL p(@version, @increment)';
     mysql> EXECUTE s;
     mysql> SELECT @version, @increment;
     +--------------+------------+
     | @version     | @increment |
     +--------------+------------+
     | 5.5.0-m2-log |         11 |
     +--------------+------------+

To write C programs that use the *Note `CALL': call. SQL statement to
execute stored procedures that produce result sets, the
`CLIENT_MULTI_RESULTS' flag must be enabled. This is because each *Note
`CALL': call. returns a result to indicate the call status, in addition
to any result sets that might be returned by statements executed within
the procedure. `CLIENT_MULTI_RESULTS' must also be enabled if *Note
`CALL': call. is used to execute any stored procedure that contains
prepared statements. It cannot be determined when such a procedure is
loaded whether those statements will produce result sets, so it is
necessary to assume that they will.

`CLIENT_MULTI_RESULTS' can be enabled when you call *Note
`mysql_real_connect()': mysql-real-connect, either explicitly by
passing the `CLIENT_MULTI_RESULTS' flag itself, or implicitly by passing
`CLIENT_MULTI_STATEMENTS' (which also enables `CLIENT_MULTI_RESULTS').
As of MySQL 5.5.3, `CLIENT_MULTI_RESULTS' is enabled by default.

To process the result of a *Note `CALL': call.  statement executed using
*Note `mysql_query()': mysql-query. or *Note `mysql_real_query()':
mysql-real-query, use a loop that calls *Note `mysql_next_result()':
mysql-next-result. to determine whether there are more results. For an
example, see *Note c-api-multiple-queries::.

For programs written in a language that provides a MySQL interface,
there is no native method prior to MySQL 5.5.3 for directly retrieving
the results of `OUT' or `INOUT' parameters from *Note `CALL': call.
statements. To get the parameter values, pass user-defined variables to
the procedure in the *Note `CALL': call. statement and then execute a
*Note `SELECT': select. statement to produce a result set containing
the variable values. To handle an `INOUT' parameter, execute a
statement prior to the *Note `CALL': call. that sets the corresponding
user variable to the value to be passed to the procedure.

The following example illustrates the technique (without error
checking) for the stored procedure `p' described earlier that has an
`OUT' parameter and an `INOUT' parameter:

     mysql_query(mysql, "SET @increment = 10");
     mysql_query(mysql, "CALL p(@version, @increment)");
     mysql_query(mysql, "SELECT @version, @increment");
     result = mysql_store_result(mysql);
     row = mysql_fetch_row(result);
     mysql_free_result(result);

After the preceding code executes, `row[0]' and `row[1]' contain the
values of `@version' and `@increment', respectively.

As of MySQL 5.5.3, C programs can use the prepared-statement interface
to execute *Note `CALL': call.  statements and access `OUT' and `INOUT'
parameters. This is done by processing the result of a *Note `CALL':
call. statement using a loop that calls *Note
`mysql_stmt_next_result()': mysql-stmt-next-result. to determine
whether there are more results. For an example, see *Note
c-api-prepared-call-statements::. Languages that provide a MySQL
interface can use prepared *Note `CALL': call. statements to directly
retrieve `OUT' and `INOUT' procedure parameters.


File: manual.info,  Node: delete,  Next: do,  Prev: call,  Up: sql-syntax-data-manipulation

13.2.2 `DELETE' Syntax
----------------------

Single-table syntax:

     DELETE [LOW_PRIORITY] [QUICK] [IGNORE] FROM TBL_NAME
         [WHERE WHERE_CONDITION]
         [ORDER BY ...]
         [LIMIT ROW_COUNT]

Multiple-table syntax:

     DELETE [LOW_PRIORITY] [QUICK] [IGNORE]
         TBL_NAME[.*] [, TBL_NAME[.*]] ...
         FROM TABLE_REFERENCES
         [WHERE WHERE_CONDITION]

Or:

     DELETE [LOW_PRIORITY] [QUICK] [IGNORE]
         FROM TBL_NAME[.*] [, TBL_NAME[.*]] ...
         USING TABLE_REFERENCES
         [WHERE WHERE_CONDITION]

For the single-table syntax, the *Note `DELETE': delete. statement
deletes rows from TBL_NAME and returns a count of the number of deleted
rows. This count can be obtained by calling the `ROW_COUNT()' function
(see *Note information-functions::). The `WHERE' clause, if given,
specifies the conditions that identify which rows to delete. With no
`WHERE' clause, all rows are deleted. If the `ORDER BY' clause is
specified, the rows are deleted in the order that is specified. The
`LIMIT' clause places a limit on the number of rows that can be deleted.

For the multiple-table syntax, *Note `DELETE': delete. deletes from each
TBL_NAME the rows that satisfy the conditions. In this case, `ORDER BY'
and `LIMIT' cannot be used.

WHERE_CONDITION is an expression that evaluates to true for each row to
be deleted. It is specified as described in *Note select::.

Currently, you cannot delete from a table and select from the same
table in a subquery.

You need the `DELETE' privilege on a table to delete rows from it. You
need only the `SELECT' privilege for any columns that are only read,
such as those named in the `WHERE' clause.

As stated, a *Note `DELETE': delete. statement with no `WHERE' clause
deletes all rows. A faster way to do this, when you do not need to know
the number of deleted rows, is to use *Note `TRUNCATE TABLE':
truncate-table.  However, within a transaction or if you have a lock on
the table, *Note `TRUNCATE TABLE': truncate-table. cannot be used
whereas *Note `DELETE': delete. can. See *Note truncate-table::, and
*Note lock-tables::.

If you delete the row containing the maximum value for an
`AUTO_INCREMENT' column, the value is not reused for a `MyISAM' or
`InnoDB' table. If you delete all rows in the table with `DELETE FROM
TBL_NAME' (without a `WHERE' clause) in `autocommit' mode, the sequence
starts over for all storage engines except `InnoDB' and `MyISAM'. There
are some exceptions to this behavior for `InnoDB' tables, as discussed
in *Note innodb-auto-increment-handling::.

For `MyISAM' tables, you can specify an `AUTO_INCREMENT' secondary
column in a multiple-column key. In this case, reuse of values deleted
from the top of the sequence occurs even for `MyISAM' tables. See *Note
example-auto-increment::.

The *Note `DELETE': delete. statement supports the following modifiers:

   * If you specify `LOW_PRIORITY', the server delays execution of the
     *Note `DELETE': delete.  until no other clients are reading from
     the table. This affects only storage engines that use only
     table-level locking (such as `MyISAM', `MEMORY', and `MERGE').

   * For `MyISAM' tables, if you use the `QUICK' keyword, the storage
     engine does not merge index leaves during delete, which may speed
     up some kinds of delete operations.

   * The `IGNORE' keyword causes MySQL to ignore all errors during the
     process of deleting rows. (Errors encountered during the parsing
     stage are processed in the usual manner.) Errors that are ignored
     due to the use of `IGNORE' are returned as warnings.

The speed of delete operations may also be affected by factors
discussed in *Note delete-speed::.

In `MyISAM' tables, deleted rows are maintained in a linked list and
subsequent *Note `INSERT': insert. operations reuse old row positions.
To reclaim unused space and reduce file sizes, use the *Note `OPTIMIZE
TABLE': optimize-table. statement or the *Note `myisamchk': myisamchk.
utility to reorganize tables.  *Note `OPTIMIZE TABLE': optimize-table.
is easier to use, but *Note `myisamchk': myisamchk. is faster. See
*Note optimize-table::, and *Note myisamchk::.

The `QUICK' modifier affects whether index leaves are merged for delete
operations. `DELETE QUICK' is most useful for applications where index
values for deleted rows are replaced by similar index values from rows
inserted later. In this case, the holes left by deleted values are
reused.

`DELETE QUICK' is not useful when deleted values lead to underfilled
index blocks spanning a range of index values for which new inserts
occur again. In this case, use of `QUICK' can lead to wasted space in
the index that remains unreclaimed. Here is an example of such a
scenario:

  1. Create a table that contains an indexed `AUTO_INCREMENT' column.

  2. Insert many rows into the table. Each insert results in an index
     value that is added to the high end of the index.

  3. Delete a block of rows at the low end of the column range using
     `DELETE QUICK'.

In this scenario, the index blocks associated with the deleted index
values become underfilled but are not merged with other index blocks
due to the use of `QUICK'. They remain underfilled when new inserts
occur, because new rows do not have index values in the deleted range.
Furthermore, they remain underfilled even if you later use *Note
`DELETE': delete. without `QUICK', unless some of the deleted index
values happen to lie in index blocks within or adjacent to the
underfilled blocks. To reclaim unused index space under these
circumstances, use *Note `OPTIMIZE TABLE': optimize-table.

If you are going to delete many rows from a table, it might be faster
to use `DELETE QUICK' followed by *Note `OPTIMIZE TABLE':
optimize-table. This rebuilds the index rather than performing many
index block merge operations.

The MySQL-specific `LIMIT ROW_COUNT' option to *Note `DELETE': delete.
tells the server the maximum number of rows to be deleted before
control is returned to the client. This can be used to ensure that a
given *Note `DELETE': delete. statement does not take too much time.
You can simply repeat the *Note `DELETE': delete. statement until the
number of affected rows is less than the `LIMIT' value.

If the *Note `DELETE': delete. statement includes an `ORDER BY' clause,
rows are deleted in the order specified by the clause. This is useful
primarily in conjunction with `LIMIT'. For example, the following
statement finds rows matching the `WHERE' clause, sorts them by
`timestamp_column', and deletes the first (oldest) one:

     DELETE FROM somelog WHERE user = 'jcole'
     ORDER BY timestamp_column LIMIT 1;

`ORDER BY' may also be useful in some cases to delete rows in an order
required to avoid referential integrity violations.

If you are deleting many rows from a large table, you may exceed the
lock table size for an `InnoDB' table. To avoid this problem, or simply
to minimize the time that the table remains locked, the following
strategy (which does not use *Note `DELETE': delete. at all) might be
helpful:

  1. Select the rows _not_ to be deleted into an empty table that has
     the same structure as the original table:

          INSERT INTO t_copy SELECT * FROM t WHERE ... ;

  2. Use *Note `RENAME TABLE': rename-table. to atomically move the
     original table out of the way and rename the copy to the original
     name:

          RENAME TABLE t TO t_old, t_copy TO t;

  3. Drop the original table:

          DROP TABLE t_old;

No other sessions can access the tables involved while *Note `RENAME
TABLE': rename-table. executes, so the rename operation is not subject
to concurrency problems. See *Note rename-table::.

You can specify multiple tables in a *Note `DELETE': delete. statement
to delete rows from one or more tables depending on the particular
condition in the `WHERE' clause. However, you cannot use `ORDER BY' or
`LIMIT' in a multiple-table *Note `DELETE': delete. The
TABLE_REFERENCES clause lists the tables involved in the join. Its
syntax is described in *Note join::.

For the first multiple-table syntax, only matching rows from the tables
listed before the `FROM' clause are deleted. For the second
multiple-table syntax, only matching rows from the tables listed in the
`FROM' clause (before the `USING' clause) are deleted. The effect is
that you can delete rows from many tables at the same time and have
additional tables that are used only for searching:

     DELETE t1, t2 FROM t1 INNER JOIN t2 INNER JOIN t3
     WHERE t1.id=t2.id AND t2.id=t3.id;

Or:

     DELETE FROM t1, t2 USING t1 INNER JOIN t2 INNER JOIN t3
     WHERE t1.id=t2.id AND t2.id=t3.id;

These statements use all three tables when searching for rows to
delete, but delete matching rows only from tables `t1' and `t2'.

The preceding examples use `INNER JOIN', but multiple-table *Note
`DELETE': delete. statements can use other types of join permitted in
*Note `SELECT': select. statements, such as `LEFT JOIN'. For example,
to delete rows that exist in `t1' that have no match in `t2', use a
`LEFT JOIN':

     DELETE t1 FROM t1 LEFT JOIN t2 ON t1.id=t2.id WHERE t2.id IS NULL;

The syntax permits `.*' after each TBL_NAME for compatibility with
`Access'.

If you use a multiple-table *Note `DELETE': delete.  statement
involving `InnoDB' tables for which there are foreign key constraints,
the MySQL optimizer might process tables in an order that differs from
that of their parent/child relationship. In this case, the statement
fails and rolls back. Instead, you should delete from a single table and
rely on the `ON DELETE' capabilities that `InnoDB' provides to cause
the other tables to be modified accordingly.

*Note*:

If you declare an alias for a table, you must use the alias when
referring to the table:

     DELETE t1 FROM test AS t1, test2 WHERE ...

Table aliases in a multiple-table *Note `DELETE': delete. should be
declared only in the TABLE_REFERENCES part of the statement.

Correct:

     DELETE a1, a2 FROM t1 AS a1 INNER JOIN t2 AS a2
     WHERE a1.id=a2.id;

     DELETE FROM a1, a2 USING t1 AS a1 INNER JOIN t2 AS a2
     WHERE a1.id=a2.id;

Incorrect:

     DELETE t1 AS a1, t2 AS a2 FROM t1 INNER JOIN t2
     WHERE a1.id=a2.id;

     DELETE FROM t1 AS a1, t2 AS a2 USING t1 INNER JOIN t2
     WHERE a1.id=a2.id;

Declaration of aliases other than in the TABLE_REFERENCES part of the
statement should be avoided because that can lead to ambiguous
statements that have unexpected results such as deleting rows from the
wrong table. This is such a statement:

     DELETE t1 AS a2 FROM t1 AS a1 INNER JOIN t2 AS a2;

Before MySQL 5.5.3, alias declarations outside the TABLE_REFERENCES
part of the statement are disallowed for the `USING' variant of
multiple-table *Note `DELETE': delete. syntax. As of MySQL 5.5.3, alias
declarations outside TABLE_REFERENCES are disallowed for all
multiple-table *Note `DELETE': delete. statements.

Before MySQL 5.5.3, for alias references in the list of tables from
which to delete rows in a multiple-table delete, the default database
is used unless one is specified explicitly. For example, if the default
database is `db1', the following statement does not work because the
unqualified alias reference `a2' is interpreted as having a database of
`db1':

     DELETE a1, a2 FROM db1.t1 AS a1 INNER JOIN db2.t2 AS a2
     WHERE a1.id=a2.id;

To correctly match an alias that refers to a table outside the default
database, you must explicitly qualify the reference with the name of
the proper database:

     DELETE a1, db2.a2 FROM db1.t1 AS a1 INNER JOIN db2.t2 AS a2
     WHERE a1.id=a2.id;

As of MySQL 5.5.3, alias resolution does not require qualification and
alias references should not be qualified with the database name.
Qualified names are interpreted as referring to tables, not aliases.


File: manual.info,  Node: do,  Next: handler,  Prev: delete,  Up: sql-syntax-data-manipulation

13.2.3 `DO' Syntax
------------------

     DO EXPR [, EXPR] ...

*Note `DO': do. executes the expressions but does not return any
results. In most respects, *Note `DO': do. is shorthand for `SELECT
EXPR, ...', but has the advantage that it is slightly faster when you
do not care about the result.

*Note `DO': do. is useful primarily with functions that have side
effects, such as `RELEASE_LOCK()'.


File: manual.info,  Node: handler,  Next: insert,  Prev: do,  Up: sql-syntax-data-manipulation

13.2.4 `HANDLER' Syntax
-----------------------

     HANDLER TBL_NAME OPEN [ [AS] ALIAS]

     HANDLER TBL_NAME READ INDEX_NAME { = | <= | >= | < | > } (VALUE1,VALUE2,...)
         [ WHERE WHERE_CONDITION ] [LIMIT ... ]
     HANDLER TBL_NAME READ INDEX_NAME { FIRST | NEXT | PREV | LAST }
         [ WHERE WHERE_CONDITION ] [LIMIT ... ]
     HANDLER TBL_NAME READ { FIRST | NEXT }
         [ WHERE WHERE_CONDITION ] [LIMIT ... ]

     HANDLER TBL_NAME CLOSE

The `HANDLER' statement provides direct access to table storage engine
interfaces. It is available for `InnoDB' and `MyISAM' tables.

The `HANDLER ... OPEN' statement opens a table, making it accessible
using subsequent `HANDLER ...  READ' statements. This table object is
not shared by other sessions and is not closed until the session calls
`HANDLER ... CLOSE' or the session terminates. If you open the table
using an alias, further references to the open table with other
`HANDLER' statements must use the alias rather than the table name.

The first `HANDLER ... READ' syntax fetches a row where the index
specified satisfies the given values and the `WHERE' condition is met.
If you have a multiple-column index, specify the index column values as
a comma-separated list. Either specify values for all the columns in
the index, or specify values for a leftmost prefix of the index
columns. Suppose that an index `my_idx' includes three columns named
`col_a', `col_b', and `col_c', in that order. The `HANDLER' statement
can specify values for all three columns in the index, or for the
columns in a leftmost prefix. For example:

     HANDLER ... READ my_idx = (col_a_val,col_b_val,col_c_val) ...
     HANDLER ... READ my_idx = (col_a_val,col_b_val) ...
     HANDLER ... READ my_idx = (col_a_val) ...

To employ the `HANDLER' interface to refer to a table's `PRIMARY KEY',
use the quoted identifier ``PRIMARY`':

     HANDLER TBL_NAME READ `PRIMARY` ...

The second `HANDLER ... READ' syntax fetches a row from the table in
index order that matches the `WHERE' condition.

The third `HANDLER ... READ' syntax fetches a row from the table in
natural row order that matches the `WHERE' condition. It is faster than
`HANDLER TBL_NAME READ INDEX_NAME' when a full table scan is desired.
Natural row order is the order in which rows are stored in a `MyISAM'
table data file. This statement works for `InnoDB' tables as well, but
there is no such concept because there is no separate data file.

Without a `LIMIT' clause, all forms of `HANDLER ... READ' fetch a
single row if one is available. To return a specific number of rows,
include a `LIMIT' clause. It has the same syntax as for the *Note
`SELECT': select. statement. See *Note select::.

`HANDLER ... CLOSE' closes a table that was opened with `HANDLER ...
OPEN'.

There are several reasons to use the `HANDLER' interface instead of
normal *Note `SELECT': select.  statements:

   * `HANDLER' is faster than *Note `SELECT': select.:

        * A designated storage engine handler object is allocated for
          the `HANDLER ... OPEN'. The object is reused for subsequent
          `HANDLER' statements for that table; it need not be
          reinitialized for each one.

        * There is less parsing involved.

        * There is no optimizer or query-checking overhead.

        * The handler interface does not have to provide a consistent
          look of the data (for example, dirty reads are permitted), so
          the storage engine can use optimizations that *Note `SELECT':
          select. does not normally permit.

   * `HANDLER' makes it easier to port to MySQL applications that use a
     low-level `ISAM'-like interface.

   * `HANDLER' enables you to traverse a database in a manner that is
     difficult (or even impossible) to accomplish with *Note `SELECT':
     select. The `HANDLER' interface is a more natural way to look at
     data when working with applications that provide an interactive
     user interface to the database.

`HANDLER' is a somewhat low-level statement. For example, it does not
provide consistency. That is, `HANDLER ... OPEN' does _not_ take a
snapshot of the table, and does _not_ lock the table. This means that
after a `HANDLER ...  OPEN' statement is issued, table data can be
modified (by the current session or other sessions) and these
modifications might be only partially visible to `HANDLER ...  NEXT' or
`HANDLER ... PREV' scans.

An open handler can be closed and marked for reopen, in which case the
handler loses its position in the table. This occurs when both of the
following circumstances are true:

   * Any session executes *Note `FLUSH TABLES': flush.  or DDL
     statements on the handler's table.

   * The session in which the handler is open executes non-`HANDLER'
     statements that use tables.

*Note `TRUNCATE TABLE': truncate-table. for a table closes all handlers
for the table that were opened with *Note `HANDLER OPEN': handler.

If a table is flushed with *Note `FLUSH TABLES TBL_NAME WITH READ
LOCK': flush. was opened with `HANDLER', the handler is implicitly
flushed and loses its position.

`HANDLER' is not supported with partitioned tables.


File: manual.info,  Node: insert,  Next: load-data,  Prev: handler,  Up: sql-syntax-data-manipulation

13.2.5 `INSERT' Syntax
----------------------

* Menu:

* insert-select::                `INSERT ... SELECT' Syntax
* insert-delayed::               `INSERT DELAYED' Syntax
* insert-on-duplicate::          `INSERT ... ON DUPLICATE KEY UPDATE' Syntax

     INSERT [LOW_PRIORITY | DELAYED | HIGH_PRIORITY] [IGNORE]
         [INTO] TBL_NAME [(COL_NAME,...)]
         {VALUES | VALUE} ({EXPR | DEFAULT},...),(...),...
         [ ON DUPLICATE KEY UPDATE
           COL_NAME=EXPR
             [, COL_NAME=EXPR] ... ]

Or:

     INSERT [LOW_PRIORITY | DELAYED | HIGH_PRIORITY] [IGNORE]
         [INTO] TBL_NAME
         SET COL_NAME={EXPR | DEFAULT}, ...
         [ ON DUPLICATE KEY UPDATE
           COL_NAME=EXPR
             [, COL_NAME=EXPR] ... ]

Or:

     INSERT [LOW_PRIORITY | HIGH_PRIORITY] [IGNORE]
         [INTO] TBL_NAME [(COL_NAME,...)]
         SELECT ...
         [ ON DUPLICATE KEY UPDATE
           COL_NAME=EXPR
             [, COL_NAME=EXPR] ... ]

*Note `INSERT': insert. inserts new rows into an existing table. The
*Note `INSERT ... VALUES': insert. and *Note `INSERT ... SET': insert.
forms of the statement insert rows based on explicitly specified
values. The *Note `INSERT ... SELECT': insert-select. form inserts rows
selected from another table or tables. *Note `INSERT ... SELECT':
insert-select. is discussed further in *Note insert-select::.

You can use *Note `REPLACE': replace. instead of *Note `INSERT':
insert. to overwrite old rows.  *Note `REPLACE': replace. is the
counterpart to *Note `INSERT IGNORE': insert. in the treatment of new
rows that contain unique key values that duplicate old rows: The new
rows are used to replace the old rows rather than being discarded. See
*Note replace::.

TBL_NAME is the table into which rows should be inserted. The columns
for which the statement provides values can be specified as follows:

   * You can provide a comma-separated list of column names following
     the table name. In this case, a value for each named column must
     be provided by the `VALUES' list or the *Note `SELECT': select.
     statement.

   * If you do not specify a list of column names for *Note `INSERT ...
     VALUES': insert. or *Note `INSERT ... SELECT': insert-select,
     values for every column in the table must be provided by the
     `VALUES' list or the *Note `SELECT': select. statement. If you do
     not know the order of the columns in the table, use `DESCRIBE
     TBL_NAME' to find out.

   * The `SET' clause indicates the column names explicitly.

Column values can be given in several ways:

   * If you are not running in strict SQL mode, any column not
     explicitly given a value is set to its default (explicit or
     implicit) value. For example, if you specify a column list that
     does not name all the columns in the table, unnamed columns are
     set to their default values. Default value assignment is described
     in *Note data-type-defaults::. See also *Note
     constraint-invalid-data::.

     If you want an *Note `INSERT': insert. statement to generate an
     error unless you explicitly specify values for all columns that do
     not have a default value, you should use strict mode. See *Note
     server-sql-mode::.

   * Use the keyword `DEFAULT' to set a column explicitly to its
     default value. This makes it easier to write *Note `INSERT':
     insert. statements that assign values to all but a few columns,
     because it enables you to avoid writing an incomplete `VALUES' list
     that does not include a value for each column in the table.
     Otherwise, you would have to write out the list of column names
     corresponding to each value in the `VALUES' list.

     You can also use `DEFAULT(COL_NAME)' as a more general form that
     can be used in expressions to produce a given column's default
     value.

   * If both the column list and the `VALUES' list are empty, *Note
     `INSERT': insert. creates a row with each column set to its
     default value:

          INSERT INTO TBL_NAME () VALUES();

     In strict mode, an error occurs if any column doesn't have a
     default value. Otherwise, MySQL uses the implicit default value
     for any column that does not have an explicitly defined default.

   * You can specify an expression EXPR to provide a column value. This
     might involve type conversion if the type of the expression does
     not match the type of the column, and conversion of a given value
     can result in different inserted values depending on the data
     type. For example, inserting the string `'1999.0e-2'' into an
     *Note `INT': integer-types, *Note `FLOAT': floating-point-types,
     `DECIMAL(10,6)', or *Note `YEAR': year. column results in the
     values `1999', `19.9921', `19.992100', and `1999' being inserted,
     respectively. The reason the value stored in the *Note `INT':
     integer-types. and *Note `YEAR': year. columns is `1999' is that
     the string-to-integer conversion looks only at as much of the
     initial part of the string as may be considered a valid integer or
     year. For the floating-point and fixed-point columns, the
     string-to-floating-point conversion considers the entire string a
     valid floating-point value.

     An expression EXPR can refer to any column that was set earlier in
     a value list. For example, you can do this because the value for
     `col2' refers to `col1', which has previously been assigned:

          INSERT INTO TBL_NAME (col1,col2) VALUES(15,col1*2);

     But the following is not legal, because the value for `col1'
     refers to `col2', which is assigned after `col1':

          INSERT INTO TBL_NAME (col1,col2) VALUES(col2*2,15);

     One exception involves columns that contain `AUTO_INCREMENT'
     values. Because the `AUTO_INCREMENT' value is generated after
     other value assignments, any reference to an `AUTO_INCREMENT'
     column in the assignment returns a `0'.

*Note `INSERT': insert. statements that use `VALUES' syntax can insert
multiple rows. To do this, include multiple lists of column values,
each enclosed within parentheses and separated by commas. Example:

     INSERT INTO TBL_NAME (a,b,c) VALUES(1,2,3),(4,5,6),(7,8,9);

The values list for each row must be enclosed within parentheses.  The
following statement is illegal because the number of values in the list
does not match the number of column names:

     INSERT INTO TBL_NAME (a,b,c) VALUES(1,2,3,4,5,6,7,8,9);

`VALUE' is a synonym for `VALUES' in this context. Neither implies
anything about the number of values lists, and either may be used
whether there is a single values list or multiple lists.

The affected-rows value for an *Note `INSERT': insert. can be obtained
using the `ROW_COUNT()' function (see *Note information-functions::),
or the *Note `mysql_affected_rows()': mysql-affected-rows. C API
function (see *Note mysql-affected-rows::).

If you use an *Note `INSERT ... VALUES': insert. statement with
multiple value lists or *Note `INSERT ... SELECT': insert-select, the
statement returns an information string in this format:

     Records: 100 Duplicates: 0 Warnings: 0

`Records' indicates the number of rows processed by the statement.
(This is not necessarily the number of rows actually inserted because
`Duplicates' can be nonzero.) `Duplicates' indicates the number of rows
that could not be inserted because they would duplicate some existing
unique index value. `Warnings' indicates the number of attempts to
insert column values that were problematic in some way. Warnings can
occur under any of the following conditions:

   * Inserting `NULL' into a column that has been declared `NOT NULL'.
     For multiple-row *Note `INSERT': insert. statements or *Note
     `INSERT INTO ... SELECT': insert-select. statements, the column is
     set to the implicit default value for the column data type. This is
     `0' for numeric types, the empty string (`''') for string types,
     and the `zero' value for date and time types.  *Note `INSERT INTO
     ... SELECT': insert-select. statements are handled the same way as
     multiple-row inserts because the server does not examine the
     result set from the *Note `SELECT': select. to see whether it
     returns a single row. (For a single-row *Note `INSERT': insert, no
     warning occurs when `NULL' is inserted into a `NOT NULL' column.
     Instead, the statement fails with an error.)

   * Setting a numeric column to a value that lies outside the column's
     range. The value is clipped to the closest endpoint of the range.

   * Assigning a value such as `'10.34 a'' to a numeric column. The
     trailing nonnumeric text is stripped off and the remaining numeric
     part is inserted. If the string value has no leading numeric part,
     the column is set to `0'.

   * Inserting a string into a string column (*Note `CHAR': char, *Note
     `VARCHAR': char, *Note `TEXT': blob, or *Note `BLOB': blob.) that
     exceeds the column's maximum length. The value is truncated to the
     column's maximum length.

   * Inserting a value into a date or time column that is illegal for
     the data type. The column is set to the appropriate zero value for
     the type.

If you are using the C API, the information string can be obtained by
invoking the *Note `mysql_info()': mysql-info.  function. See *Note
mysql-info::.

If *Note `INSERT': insert. inserts a row into a table that has an
`AUTO_INCREMENT' column, you can find the value used for that column by
using the SQL `LAST_INSERT_ID()' function. From within the C API, use
the *Note `mysql_insert_id()': mysql-insert-id. function.  However, you
should note that the two functions do not always behave identically.
The behavior of *Note `INSERT': insert. statements with respect to
`AUTO_INCREMENT' columns is discussed further in *Note
information-functions::, and *Note mysql-insert-id::.

The *Note `INSERT': insert. statement supports the following modifiers:

   * If you use the `DELAYED' keyword, the server puts the row or rows
     to be inserted into a buffer, and the client issuing the *Note
     `INSERT DELAYED': insert-delayed. statement can then continue
     immediately. If the table is in use, the server holds the rows.
     When the table is free, the server begins inserting rows, checking
     periodically to see whether there are any new read requests for
     the table. If there are, the delayed row queue is suspended until
     the table becomes free again. See *Note insert-delayed::.

     `DELAYED' is ignored with *Note `INSERT ... SELECT':
     insert-select. or *Note `INSERT ... ON DUPLICATE KEY UPDATE':
     insert-on-duplicate.

     `DELAYED' is also disregarded for an *Note `INSERT': insert. that
     uses functions accessing tables or triggers, or that is called
     from a function or a trigger.

   * If you use the `LOW_PRIORITY' keyword, execution of the *Note
     `INSERT': insert. is delayed until no other clients are reading
     from the table.  This includes other clients that began reading
     while existing clients are reading, and while the `INSERT
     LOW_PRIORITY' statement is waiting. It is possible, therefore, for
     a client that issues an `INSERT LOW_PRIORITY' statement to wait
     for a very long time (or even forever) in a read-heavy
     environment. (This is in contrast to *Note `INSERT DELAYED':
     insert-delayed, which lets the client continue at once.) Note that
     `LOW_PRIORITY' should normally not be used with `MyISAM' tables
     because doing so disables concurrent inserts. See *Note
     concurrent-inserts::.

     If you specify `HIGH_PRIORITY', it overrides the effect of the
     `--low-priority-updates' option if the server was started with
     that option. It also causes concurrent inserts not to be used. See
     *Note concurrent-inserts::.

     `LOW_PRIORITY' and `HIGH_PRIORITY' affect only storage engines
     that use only table-level locking (such as `MyISAM', `MEMORY', and
     `MERGE').

   * If you use the `IGNORE' keyword, errors that occur while executing
     the *Note `INSERT': insert. statement are ignored.  For example,
     without `IGNORE', a row that duplicates an existing `UNIQUE' index
     or `PRIMARY KEY' value in the table causes a duplicate-key error
     and the statement is aborted. With `IGNORE', the row still is not
     inserted, but no error occurs. Ignored errors may generate
     warnings instead, although duplicate-key errors do not.

     `IGNORE' has a similar effect on inserts into partitioned tables
     where no partition matching a given value is found. Without
     `IGNORE', such *Note `INSERT': insert. statements are aborted with
     an error; however, when *Note `INSERT IGNORE': insert. is used,
     the insert operation fails silently for the row containing the
     unmatched value, but any rows that are matched are inserted. For
     an example, see *Note partitioning-list::.

     Data conversions that would trigger errors abort the statement if
     `IGNORE' is not specified. With `IGNORE', invalid values are
     adjusted to the closest values and inserted; warnings are produced
     but the statement does not abort. You can determine with the *Note
     `mysql_info()': mysql-info. C API function how many rows were
     actually inserted into the table.

   * If you specify `ON DUPLICATE KEY UPDATE', and a row is inserted
     that would cause a duplicate value in a `UNIQUE' index or `PRIMARY
     KEY', an *Note `UPDATE': update. of the old row is performed. The
     affected-rows value per row is 1 if the row is inserted as a new
     row, 2 if an existing row is updated, and 0 if an existing row is
     set to its current values. If you specify the `CLIENT_FOUND_ROWS'
     flag to *Note `mysql_real_connect()': mysql-real-connect. when
     connecting to *Note `mysqld': mysqld, the affected-rows value is 1
     (not 0) if an existing row is set to its current values. See *Note
     insert-on-duplicate::.

Inserting into a table requires the `INSERT' privilege for the table. If
the `ON DUPLICATE KEY UPDATE' clause is used and a duplicate key causes
an *Note `UPDATE': update. to be performed instead, the statement
requires the `UPDATE' privilege for the columns to be updated. For
columns that are read but not modified you need only the `SELECT'
privilege (such as for a column referenced only on the right hand side
of an COL_NAME=EXPR assignment in an `ON DUPLICATE KEY UPDATE' clause).

An `INSERT' statement that acts on a partitioned table using a storage
engine such as *Note `MyISAM': myisam-storage-engine. that employs
table-level locks locks all partitions of the table. This does not
occur with tables using storage engines such as *Note `InnoDB':
innodb-storage-engine.  that employ row-level locking. This issue is
resolved in MySQL 5.6. See *Note partitioning-limitations-locking::, for
more information.


File: manual.info,  Node: insert-select,  Next: insert-delayed,  Prev: insert,  Up: insert

13.2.5.1 `INSERT ... SELECT' Syntax
...................................

     INSERT [LOW_PRIORITY | HIGH_PRIORITY] [IGNORE]
         [INTO] TBL_NAME [(COL_NAME,...)]
         SELECT ...
         [ ON DUPLICATE KEY UPDATE COL_NAME=EXPR, ... ]

With *Note `INSERT ... SELECT': insert-select, you can quickly insert
many rows into a table from one or many tables. For example:

     INSERT INTO tbl_temp2 (fld_id)
       SELECT tbl_temp1.fld_order_id
       FROM tbl_temp1 WHERE tbl_temp1.fld_order_id > 100;

The following conditions hold for a *Note `INSERT ... SELECT':
insert-select. statements:

   * Specify `IGNORE' to ignore rows that would cause duplicate-key
     violations.

   * `DELAYED' is ignored with *Note `INSERT ... SELECT': insert-select.

   * The target table of the *Note `INSERT': insert. statement may
     appear in the `FROM' clause of the *Note `SELECT': select. part of
     the query.  (This was not possible in some older versions of
     MySQL.)  However, you cannot insert into a table and select from
     the same table in a subquery.

     When selecting from and inserting into a table at the same time,
     MySQL creates a temporary table to hold the rows from the *Note
     `SELECT': select. and then inserts those rows into the target
     table. However, it remains true that you cannot use `INSERT INTO t
     ... SELECT ...  FROM t' when `t' is a `TEMPORARY' table, because
     `TEMPORARY' tables cannot be referred to twice in the same
     statement (see *Note temporary-table-problems::).

   * `AUTO_INCREMENT' columns work as usual.

   * To ensure that the binary log can be used to re-create the
     original tables, MySQL does not permit concurrent inserts for
     *Note `INSERT ... SELECT': insert-select. statements.

   * To avoid ambiguous column reference problems when the *Note
     `SELECT': select. and the *Note `INSERT': insert. refer to the same
     table, provide a unique alias for each table used in the *Note
     `SELECT': select. part, and qualify column names in that part with
     the appropriate alias.

In the values part of `ON DUPLICATE KEY UPDATE', you can refer to
columns in other tables, as long as you do not use `GROUP BY' in the
*Note `SELECT': select. part. One side effect is that you must qualify
nonunique column names in the values part.

The order in which rows are returned by a *Note `SELECT': select.
statement with no `ORDER BY' clause is not determined. This means that,
when using replication, there is no guarantee that such a `SELECT'
returns rows in the same order on the master and the slave; this can
lead to inconsistencies between them. To prevent this from occurring,
you should always write `INSERT ... SELECT' statements that are to be
replicated as `INSERT ... SELECT ... ORDER BY COLUMN'. The choice of
COLUMN does not matter as long as the same order for returning the rows
is enforced on both the master and the slave. See also *Note
replication-features-limit::.

Due to this issue, beginning with MySQL 5.5.18, *Note `INSERT ...
SELECT ON DUPLICATE KEY UPDATE': insert-on-duplicate. and *Note `INSERT
IGNORE ... SELECT': insert-select. statements are flagged as unsafe for
statement-based replication. With this change, such statements produce
a warning in the log when using statement-based mode and are logged
using the row-based format when using `MIXED' mode. (Bug #11758262, Bug
#50439)

See also *Note replication-sbr-rbr::.

An `INSERT ... SELECT' statement that acts on partitioned tables using
a storage engine such as *Note `MyISAM': myisam-storage-engine. that
employs table-level locks locks all partitions of the source and target
tables. This does not occur with tables using storage engines such as
*Note `InnoDB': innodb-storage-engine. that employ row-level locking.
This issue is resolved in MySQL 5.6. See *Note
partitioning-limitations-locking::, for more information.


File: manual.info,  Node: insert-delayed,  Next: insert-on-duplicate,  Prev: insert-select,  Up: insert

13.2.5.2 `INSERT DELAYED' Syntax
................................

     INSERT DELAYED ...

The `DELAYED' option for the *Note `INSERT': insert. statement is a
MySQL extension to standard SQL that is very useful if you have clients
that cannot or need not wait for the *Note `INSERT': insert. to
complete. This is a common situation when you use MySQL for logging and
you also periodically run *Note `SELECT': select. and *Note `UPDATE':
update. statements that take a long time to complete.

When a client uses *Note `INSERT DELAYED': insert-delayed, it gets an
okay from the server at once, and the row is queued to be inserted when
the table is not in use by any other thread.

Another major benefit of using *Note `INSERT DELAYED': insert-delayed.
is that inserts from many clients are bundled together and written in
one block. This is much faster than performing many separate inserts.

Note that *Note `INSERT DELAYED': insert-delayed. is slower than a
normal *Note `INSERT': insert. if the table is not otherwise in use.
There is also the additional overhead for the server to handle a
separate thread for each table for which there are delayed rows. This
means that you should use *Note `INSERT DELAYED': insert-delayed. only
when you are really sure that you need it.

The queued rows are held only in memory until they are inserted into
the table. This means that if you terminate *Note `mysqld': mysqld.
forcibly (for example, with `kill -9') or if *Note `mysqld': mysqld.
dies unexpectedly, _any queued rows that have not been written to disk
are lost_.

There are some constraints on the use of `DELAYED':

   * *Note `INSERT DELAYED': insert-delayed. works only with `MyISAM',
     `MEMORY', `ARCHIVE', and `BLACKHOLE' tables. For engines that do
     not support `DELAYED', an error occurs.

   * An error occurs for *Note `INSERT DELAYED': insert-delayed. if
     used with a table that has been locked with `LOCK TABLES' because
     the insert must be handled by a separate thread, not by the
     session that holds the lock.

   * For `MyISAM' tables, if there are no free blocks in the middle of
     the data file, concurrent *Note `SELECT': select. and *Note
     `INSERT': insert. statements are supported. Under these
     circumstances, you very seldom need to use *Note `INSERT DELAYED':
     insert-delayed. with `MyISAM'.

   * *Note `INSERT DELAYED': insert-delayed. should be used only for
     *Note `INSERT': insert. statements that specify value lists. The
     server ignores `DELAYED' for *Note `INSERT ... SELECT':
     insert-select. or *Note `INSERT ... ON DUPLICATE KEY UPDATE':
     insert-on-duplicate. statements.

   * Because the *Note `INSERT DELAYED': insert-delayed.  statement
     returns immediately, before the rows are inserted, you cannot use
     `LAST_INSERT_ID()' to get the `AUTO_INCREMENT' value that the
     statement might generate.

   * `DELAYED' rows are not visible to *Note `SELECT': select.
     statements until they actually have been inserted.

   * Prior to MySQL 5.5.7, *Note `INSERT DELAYED': insert-delayed. was
     treated as a normal *Note `INSERT': insert. if the statement
     inserted multiple rows, binary logging was enabled, and the global
     logging format was statement-based (that is, whenever
     `binlog_format' was set to `STATEMENT'). Beginning with MySQL
     5.5.7, *Note `INSERT DELAYED': insert-delayed. is always handled
     as a simple *Note `INSERT': insert.  (that is, without the
     `DELAYED' option) whenever the value of `binlog_format' is
     `STATEMENT' or `MIXED'.  (In the latter case, the statement no
     longer triggers a switch to row-based logging, and so is logged
     using the statement-based format.)

     This does not apply when using row-based binary logging mode
     (`binlog_format' set to `ROW'), in which *Note `INSERT DELAYED':
     insert-delayed. statements are always executed using the `DELAYED'
     option as specified, and logged as row-update events.

   * `DELAYED' is ignored on slave replication servers, so that *Note
     `INSERT DELAYED': insert-delayed. is treated as a normal *Note
     `INSERT': insert. on slaves. This is because `DELAYED' could cause
     the slave to have different data than the master.

   * Pending *Note `INSERT DELAYED': insert-delayed.  statements are
     lost if a table is write locked and *Note `ALTER TABLE':
     alter-table. is used to modify the table structure.

   * *Note `INSERT DELAYED': insert-delayed. is not supported for views.

   * *Note `INSERT DELAYED': insert-delayed. is not supported for
     partitioned tables.

The following describes in detail what happens when you use the
`DELAYED' option to *Note `INSERT': insert. or *Note `REPLACE':
replace. In this description, the `thread' is the thread that received
an *Note `INSERT DELAYED': insert-delayed. statement and `handler' is
the thread that handles all *Note `INSERT DELAYED': insert-delayed.
statements for a particular table.

   * When a thread executes a `DELAYED' statement for a table, a
     handler thread is created to process all `DELAYED' statements for
     the table, if no such handler already exists.

   * The thread checks whether the handler has previously acquired a
     `DELAYED' lock; if not, it tells the handler thread to do so. The
     `DELAYED' lock can be obtained even if other threads have a `READ'
     or `WRITE' lock on the table. However, the handler waits for all
     *Note `ALTER TABLE': alter-table. locks or *Note `FLUSH TABLES':
     flush. statements to finish, to ensure that the table structure is
     up to date.

   * The thread executes the *Note `INSERT': insert. statement, but
     instead of writing the row to the table, it puts a copy of the
     final row into a queue that is managed by the handler thread. Any
     syntax errors are noticed by the thread and reported to the client
     program.

   * The client cannot obtain from the server the number of duplicate
     rows or the `AUTO_INCREMENT' value for the resulting row, because
     the *Note `INSERT': insert. returns before the insert operation
     has been completed. (If you use the C API, the *Note
     `mysql_info()': mysql-info. function does not return anything
     meaningful, for the same reason.)

   * The binary log is updated by the handler thread when the row is
     inserted into the table. In case of multiple-row inserts, the
     binary log is updated when the first row is inserted.

   * Each time that `delayed_insert_limit' rows are written, the
     handler checks whether any *Note `SELECT': select. statements are
     still pending. If so, it permits these to execute before
     continuing.

   * When the handler has no more rows in its queue, the table is
     unlocked. If no new *Note `INSERT DELAYED': insert-delayed.
     statements are received within `delayed_insert_timeout' seconds,
     the handler terminates.

   * If more than `delayed_queue_size' rows are pending in a specific
     handler queue, the thread requesting *Note `INSERT DELAYED':
     insert-delayed. waits until there is room in the queue. This is
     done to ensure that *Note `mysqld': mysqld. does not use all
     memory for the delayed memory queue.

   * The handler thread shows up in the MySQL process list with
     `delayed_insert' in the `Command' column. It is killed if you
     execute a *Note `FLUSH TABLES': flush. statement or kill it with
     `KILL THREAD_ID'. However, before exiting, it first stores all
     queued rows into the table. During this time it does not accept
     any new *Note `INSERT': insert. statements from other threads. If
     you execute an *Note `INSERT DELAYED': insert-delayed. statement
     after this, a new handler thread is created.

     Note that this means that *Note `INSERT DELAYED': insert-delayed.
     statements have higher priority than normal *Note `INSERT':
     insert. statements if there is an *Note `INSERT DELAYED':
     insert-delayed.  handler running. Other update statements have to
     wait until the *Note `INSERT DELAYED': insert-delayed. queue is
     empty, someone terminates the handler thread (with `KILL
     THREAD_ID'), or someone executes a *Note `FLUSH TABLES': flush.

   * The following status variables provide information about *Note
     `INSERT DELAYED': insert-delayed. statements.

     This table lists status variables for *Note `INSERT DELAYED':
     insert-delayed. statements and describes the meaning of each.

     Status Variable                Meaning
     `Delayed_insert_threads'       Number of handler threads
     `Delayed_writes'               Number of rows written with *Note
                                    `INSERT DELAYED': insert-delayed.
     `Not_flushed_delayed_rows'     Number of rows waiting to be written

     You can view these variables by issuing a *Note `SHOW STATUS':
     show-status. statement or by executing a *Note `mysqladmin
     extended-status': mysqladmin.  command.


File: manual.info,  Node: insert-on-duplicate,  Prev: insert-delayed,  Up: insert

13.2.5.3 `INSERT ... ON DUPLICATE KEY UPDATE' Syntax
....................................................

If you specify `ON DUPLICATE KEY UPDATE', and a row is inserted that
would cause a duplicate value in a `UNIQUE' index or `PRIMARY KEY',
MySQL performs an *Note `UPDATE': update. of the old row. For example,
if column `a' is declared as `UNIQUE' and contains the value `1', the
following two statements have similar effect:

     INSERT INTO table (a,b,c) VALUES (1,2,3)
       ON DUPLICATE KEY UPDATE c=c+1;

     UPDATE table SET c=c+1 WHERE a=1;

(The effects are not identical for an `InnoDB' table where `a' is an
auto-increment column.  With an auto-increment column, an `INSERT'
statement increases the auto-increment value but `UPDATE' does not.)

The `ON DUPLICATE KEY UPDATE' clause can contain multiple column
assignments, separated by commas.

With `ON DUPLICATE KEY UPDATE', the affected-rows value per row is 1 if
the row is inserted as a new row, 2 if an existing row is updated, and
0 if an existing row is set to its current values. If you specify the
`CLIENT_FOUND_ROWS' flag to *Note `mysql_real_connect()':
mysql-real-connect. when connecting to *Note `mysqld': mysqld, the
affected-rows value is 1 (not 0) if an existing row is set to its
current values.

If column `b' is also unique, the *Note `INSERT': insert. is equivalent
to this *Note `UPDATE': update. statement instead:

     UPDATE table SET c=c+1 WHERE a=1 OR b=2 LIMIT 1;

If `a=1 OR b=2' matches several rows, only _one_ row is updated. In
general, you should try to avoid using an `ON DUPLICATE KEY UPDATE'
clause on tables with multiple unique indexes.

You can use the `VALUES(COL_NAME)' function in the *Note `UPDATE':
update. clause to refer to column values from the *Note `INSERT':
insert. portion of the *Note `INSERT ... ON DUPLICATE KEY UPDATE':
insert-on-duplicate. statement. In other words, `VALUES(COL_NAME)' in
the `ON DUPLICATE KEY UPDATE' clause refers to the value of COL_NAME
that would be inserted, had no duplicate-key conflict occurred. This
function is especially useful in multiple-row inserts. The `VALUES()'
function is meaningful only in `INSERT ... UPDATE' statements and
returns `NULL' otherwise. Example:

     INSERT INTO table (a,b,c) VALUES (1,2,3),(4,5,6)
       ON DUPLICATE KEY UPDATE c=VALUES(a)+VALUES(b);

That statement is identical to the following two statements:

     INSERT INTO table (a,b,c) VALUES (1,2,3)
       ON DUPLICATE KEY UPDATE c=3;
     INSERT INTO table (a,b,c) VALUES (4,5,6)
       ON DUPLICATE KEY UPDATE c=9;

If a table contains an `AUTO_INCREMENT' column and *Note `INSERT ... ON
DUPLICATE KEY UPDATE': insert-on-duplicate. inserts or updates a row,
the `LAST_INSERT_ID()' function returns the `AUTO_INCREMENT' value.

The `DELAYED' option is ignored when you use `ON DUPLICATE KEY UPDATE'.

Because the results of *Note `INSERT ... SELECT': insert-select.
statements depend on the ordering of rows from the *Note `SELECT':
select. and this order cannot always be guaranteed, it is possible when
logging *Note `INSERT ... SELECT ON DUPLICATE KEY UPDATE':
insert-on-duplicate. statements for the master and the slave to
diverge. Thus, in MySQL 5.5.18 and later, *Note `INSERT ... SELECT ON
DUPLICATE KEY UPDATE': insert-on-duplicate. statements are flagged as
unsafe for statement-based replication. With this change, such
statements produce a warning in the log when using statement-based mode
and are logged using the row-based format when using `MIXED' mode. In
addition, beginning with MySQL 5.5.24, an *Note `INSERT ... ON
DUPLICATE KEY UPDATE': insert-on-duplicate. statement against a table
having more than one unique or primary key is also marked as unsafe.
(Bug #11765650, Bug #58637) See also *Note replication-sbr-rbr::.

An `INSERT ... ON DUPLICATE KEY UPDATE' on a partitioned table using a
storage engine such as *Note `MyISAM': myisam-storage-engine. that
employs table-level locks locks all partitions of the table. This does
not occur with tables using storage engines such as *Note `InnoDB':
innodb-storage-engine. that employ row-level locking. This issue is
resolved in MySQL 5.6. See *Note partitioning-limitations-locking::,
for more information.


File: manual.info,  Node: load-data,  Next: load-xml,  Prev: insert,  Up: sql-syntax-data-manipulation

13.2.6 `LOAD DATA INFILE' Syntax
--------------------------------

     LOAD DATA [LOW_PRIORITY | CONCURRENT] [LOCAL] INFILE 'FILE_NAME'
         [REPLACE | IGNORE]
         INTO TABLE TBL_NAME
         [CHARACTER SET CHARSET_NAME]
         [{FIELDS | COLUMNS}
             [TERMINATED BY 'STRING']
             [[OPTIONALLY] ENCLOSED BY 'CHAR']
             [ESCAPED BY 'CHAR']
         ]
         [LINES
             [STARTING BY 'STRING']
             [TERMINATED BY 'STRING']
         ]
         [IGNORE NUMBER {LINES | ROWS}]
         [(COL_NAME_OR_USER_VAR,...)]
         [SET COL_NAME = EXPR,...]

The *Note `LOAD DATA INFILE': load-data. statement reads rows from a
text file into a table at a very high speed.  *Note `LOAD DATA INFILE':
load-data. is the complement of *Note `SELECT ... INTO OUTFILE':
select-into. (See *Note select-into::.) To write data from a table to a
file, use *Note `SELECT ... INTO OUTFILE': select-into. To read the
file back into a table, use *Note `LOAD DATA INFILE': load-data. The
syntax of the `FIELDS' and `LINES' clauses is the same for both
statements.  Both clauses are optional, but `FIELDS' must precede
`LINES' if both are specified.

You can also load data files by using the *Note `mysqlimport':
mysqlimport. utility; it operates by sending a *Note `LOAD DATA
INFILE': load-data. statement to the server. The `--local' option causes
*Note `mysqlimport': mysqlimport. to read data files from the client
host. You can specify the `--compress' option to get better performance
over slow networks if the client and server support the compressed
protocol. See *Note mysqlimport::.

For more information about the efficiency of *Note `INSERT': insert.
versus *Note `LOAD DATA INFILE': load-data. and speeding up *Note `LOAD
DATA INFILE': load-data, see *Note insert-speed::.

The file name must be given as a literal string. On Windows, specify
backslashes in path names as forward slashes or doubled backslashes. The
`character_set_filesystem' system variable controls the interpretation
of the file name.

The character set indicated by the `character_set_database' system
variable is used to interpret the information in the file.  `SET NAMES'
and the setting of `character_set_client' do not affect interpretation
of input. If the contents of the input file use a character set that
differs from the default, it is usually preferable to specify the
character set of the file by using the `CHARACTER SET' clause. A
character set of `binary' specifies `no conversion.'

*Note `LOAD DATA INFILE': load-data. interprets all fields in the file
as having the same character set, regardless of the data types of the
columns into which field values are loaded. For proper interpretation of
file contents, you must ensure that it was written with the correct
character set. For example, if you write a data file with *Note
`mysqldump -T': mysqldump. or by issuing a *Note `SELECT ... INTO
OUTFILE': select-into. statement in *Note `mysql': mysql, be sure to
use a `--default-character-set' option so that output is written in the
character set to be used when the file is loaded with *Note `LOAD DATA
INFILE': load-data.

*Note*:

It is not possible to load data files that use the `ucs2', `utf16', or
`utf32' character set.

If you use `LOW_PRIORITY', execution of the *Note `LOAD DATA':
load-data. statement is delayed until no other clients are reading from
the table. This affects only storage engines that use only table-level
locking (such as `MyISAM', `MEMORY', and `MERGE').

If you specify `CONCURRENT' with a `MyISAM' table that satisfies the
condition for concurrent inserts (that is, it contains no free blocks
in the middle), other threads can retrieve data from the table while
*Note `LOAD DATA': load-data. is executing. This option affects the
performance of *Note `LOAD DATA': load-data. a bit, even if no other
thread is using the table at the same time.

With row-based replication, `CONCURRENT' is replicated regardless of
MySQL version. With statement-based replication `CONCURRENT' is not
replicated prior to MySQL 5.5.1 (see Bug #34628). For more information,
see *Note replication-features-load-data::.

The `LOCAL' keyword affects expected location of the file and error
handling, as described later.  `LOCAL' works only if your server and
your client both have been configured to permit it. For example, if
*Note `mysqld': mysqld. was started with `--local-infile=0', `LOCAL'
does not work. See *Note load-data-local::.

The `LOCAL' keyword affects where the file is expected to be found:

   * If `LOCAL' is specified, the file is read by the client program on
     the client host and sent to the server.  The file can be given as
     a full path name to specify its exact location. If given as a
     relative path name, the name is interpreted relative to the
     directory in which the client program was started.

     When using `LOCAL' with *Note `LOAD DATA': load-data, a copy of
     the file is created in the server's temporary directory. This is
     _not_ the directory determined by the value of `tmpdir' or
     `slave_load_tmpdir', but rather the operating system's temporary
     directory, and is not configurable in the MySQL Server. (Typically
     the system temporary directory is `/tmp' on Linux systems and
     `C:\WINDOWS\TEMP' on Windows.)  Lack of sufficient space for the
     copy in this directory can cause the *Note `LOAD DATA LOCAL':
     load-data. statement to fail.

   * If `LOCAL' is not specified, the file must be located on the
     server host and is read directly by the server.  The server uses
     the following rules to locate the file:

        * If the file name is an absolute path name, the server uses it
          as given.

        * If the file name is a relative path name with one or more
          leading components, the server searches for the file relative
          to the server's data directory.

        * If a file name with no leading components is given, the
          server looks for the file in the database directory of the
          default database.

In the non-`LOCAL' case, these rules mean that a file named as
`./myfile.txt' is read from the server's data directory, whereas the
file named as `myfile.txt' is read from the database directory of the
default database. For example, if `db1' is the default database, the
following *Note `LOAD DATA': load-data. statement reads the file
`data.txt' from the database directory for `db1', even though the
statement explicitly loads the file into a table in the `db2' database:

     LOAD DATA INFILE 'data.txt' INTO TABLE db2.my_table;

For security reasons, when reading text files located on the server,
the files must either reside in the database directory or be readable
by all. Also, to use *Note `LOAD DATA INFILE': load-data. on server
files, you must have the `FILE' privilege. See *Note
privileges-provided::. For non-`LOCAL' load operations, if the
`secure_file_priv' system variable is set to a nonempty directory name,
the file to be loaded must be located in that directory.

Using `LOCAL' is a bit slower than letting the server access the files
directly, because the contents of the file must be sent over the
connection by the client to the server. On the other hand, you do not
need the `FILE' privilege to load local files.

`LOCAL' also affects error handling:

   * With *Note `LOAD DATA INFILE': load-data, data-interpretation and
     duplicate-key errors terminate the operation.

   * With *Note `LOAD DATA LOCAL INFILE': load-data,
     data-interpretation and duplicate-key errors become warnings and
     the operation continues because the server has no way to stop
     transmission of the file in the middle of the operation. For
     duplicate-key errors, this is the same as if `IGNORE' is specified.
     `IGNORE' is explained further later in this section.

The `REPLACE' and `IGNORE' keywords control handling of input rows that
duplicate existing rows on unique key values:

   * If you specify `REPLACE', input rows replace existing rows. In
     other words, rows that have the same value for a primary key or
     unique index as an existing row. See *Note replace::.

   * If you specify `IGNORE', input rows that duplicate an existing row
     on a unique key value are skipped.

   * If you do not specify either option, the behavior depends on
     whether the `LOCAL' keyword is specified.  Without `LOCAL', an
     error occurs when a duplicate key value is found, and the rest of
     the text file is ignored. With `LOCAL', the default behavior is
     the same as if `IGNORE' is specified; this is because the server
     has no way to stop transmission of the file in the middle of the
     operation.

To ignore foreign key constraints during the load operation, issue a
`SET foreign_key_checks = 0' statement before executing *Note `LOAD
DATA': load-data.

If you use *Note `LOAD DATA INFILE': load-data. on an empty `MyISAM'
table, all nonunique indexes are created in a separate batch (as for
*Note `REPAIR TABLE': repair-table.). Normally, this makes *Note `LOAD
DATA INFILE': load-data. much faster when you have many indexes. In some
extreme cases, you can create the indexes even faster by turning them
off with `ALTER TABLE ... DISABLE KEYS' before loading the file into
the table and using `ALTER TABLE ... ENABLE KEYS' to re-create the
indexes after loading the file. See *Note insert-speed::.

For both the *Note `LOAD DATA INFILE': load-data. and *Note `SELECT ...
INTO OUTFILE': select-into. statements, the syntax of the `FIELDS' and
`LINES' clauses is the same. Both clauses are optional, but `FIELDS'
must precede `LINES' if both are specified.

If you specify a `FIELDS' clause, each of its subclauses (`TERMINATED
BY', `[OPTIONALLY] ENCLOSED BY', and `ESCAPED BY') is also optional,
except that you must specify at least one of them.

If you specify no `FIELDS' or `LINES' clause, the defaults are the same
as if you had written this:

     FIELDS TERMINATED BY '\t' ENCLOSED BY '' ESCAPED BY '\\'
     LINES TERMINATED BY '\n' STARTING BY ''

(Backslash is the MySQL escape character within strings in SQL
statements, so to specify a literal backslash, you must specify two
backslashes for the value to be interpreted as a single backslash. The
escape sequences `'\t'' and `'\n'' specify tab and newline characters,
respectively.)

In other words, the defaults cause *Note `LOAD DATA INFILE': load-data.
to act as follows when reading input:

   * Look for line boundaries at newlines.

   * Do not skip over any line prefix.

   * Break lines into fields at tabs.

   * Do not expect fields to be enclosed within any quoting characters.

   * Interpret characters preceded by the escape character ``\'' as
     escape sequences. For example, ``\t'', ``\n'', and ``\\'' signify
     tab, newline, and backslash, respectively. See the discussion of
     `FIELDS ESCAPED BY' later for the full list of escape sequences.

Conversely, the defaults cause *Note `SELECT ... INTO OUTFILE':
select-into. to act as follows when writing output:

   * Write tabs between fields.

   * Do not enclose fields within any quoting characters.

   * Use ``\'' to escape instances of tab, newline, or ``\'' that occur
     within field values.

   * Write newlines at the ends of lines.

*Note*:

If you have generated the text file on a Windows system, you might have
to use `LINES TERMINATED BY '\r\n'' to read the file properly, because
Windows programs typically use two characters as a line terminator.
Some programs, such as `WordPad', might use `\r' as a line terminator
when writing files. To read such files, use `LINES TERMINATED BY '\r''.

If all the lines you want to read in have a common prefix that you want
to ignore, you can use `LINES STARTING BY 'PREFIX_STRING'' to skip over
the prefix, _and anything before it_. If a line does not include the
prefix, the entire line is skipped. Suppose that you issue the
following statement:

     LOAD DATA INFILE '/tmp/test.txt' INTO TABLE test
       FIELDS TERMINATED BY ','  LINES STARTING BY 'xxx';

If the data file looks like this:

     xxx"abc",1
     something xxx"def",2
     "ghi",3

The resulting rows will be `("abc",1)' and `("def",2)'. The third row
in the file is skipped because it does not contain the prefix.

The `IGNORE NUMBER LINES' option can be used to ignore lines at the
start of the file. For example, you can use `IGNORE 1 LINES' to skip
over an initial header line containing column names:

     LOAD DATA INFILE '/tmp/test.txt' INTO TABLE test IGNORE 1 LINES;

When you use *Note `SELECT ... INTO OUTFILE': select-into. in tandem
with *Note `LOAD DATA INFILE': load-data. to write data from a database
into a file and then read the file back into the database later, the
field- and line-handling options for both statements must match.
Otherwise, *Note `LOAD DATA INFILE': load-data. will not interpret the
contents of the file properly. Suppose that you use *Note `SELECT ...
INTO OUTFILE': select-into. to write a file with fields delimited by
commas:

     SELECT * INTO OUTFILE 'data.txt'
       FIELDS TERMINATED BY ','
       FROM table2;

To read the comma-delimited file back in, the correct statement would
be:

     LOAD DATA INFILE 'data.txt' INTO TABLE table2
       FIELDS TERMINATED BY ',';

If instead you tried to read in the file with the statement shown
following, it wouldn't work because it instructs *Note `LOAD DATA
INFILE': load-data. to look for tabs between fields:

     LOAD DATA INFILE 'data.txt' INTO TABLE table2
       FIELDS TERMINATED BY '\t';

The likely result is that each input line would be interpreted as a
single field.

*Note `LOAD DATA INFILE': load-data. can be used to read files obtained
from external sources. For example, many programs can export data in
comma-separated values (CSV) format, such that lines have fields
separated by commas and enclosed within double quotation marks, with an
initial line of column names. If the lines in such a file are
terminated by carriage return/newline pairs, the statement shown here
illustrates the field- and line-handling options you would use to load
the file:

     LOAD DATA INFILE 'data.txt' INTO TABLE TBL_NAME
       FIELDS TERMINATED BY ',' ENCLOSED BY '"'
       LINES TERMINATED BY '\r\n'
       IGNORE 1 LINES;

If the input values are not necessarily enclosed within quotation
marks, use `OPTIONALLY' before the `ENCLOSED BY' keywords.

Any of the field- or line-handling options can specify an empty string
(`'''). If not empty, the `FIELDS [OPTIONALLY] ENCLOSED BY' and `FIELDS
ESCAPED BY' values must be a single character. The `FIELDS TERMINATED
BY', `LINES STARTING BY', and `LINES TERMINATED BY' values can be more
than one character. For example, to write lines that are terminated by
carriage return/linefeed pairs, or to read a file containing such
lines, specify a `LINES TERMINATED BY '\r\n'' clause.

To read a file containing jokes that are separated by lines consisting
of `%%', you can do this

     CREATE TABLE jokes
       (a INT NOT NULL AUTO_INCREMENT PRIMARY KEY,
       joke TEXT NOT NULL);
     LOAD DATA INFILE '/tmp/jokes.txt' INTO TABLE jokes
       FIELDS TERMINATED BY ''
       LINES TERMINATED BY '\n%%\n' (joke);

`FIELDS [OPTIONALLY] ENCLOSED BY' controls quoting of fields. For output
(*Note `SELECT ... INTO OUTFILE': select-into.), if you omit the word
`OPTIONALLY', all fields are enclosed by the `ENCLOSED BY' character.
An example of such output (using a comma as the field delimiter) is
shown here:

     "1","a string","100.20"
     "2","a string containing a , comma","102.20"
     "3","a string containing a \" quote","102.20"
     "4","a string containing a \", quote and comma","102.20"

If you specify `OPTIONALLY', the `ENCLOSED BY' character is used only
to enclose values from columns that have a string data type (such as
*Note `CHAR': char, *Note `BINARY': binary-varbinary, *Note `TEXT':
blob, or *Note `ENUM': enum.):

     1,"a string",100.20
     2,"a string containing a , comma",102.20
     3,"a string containing a \" quote",102.20
     4,"a string containing a \", quote and comma",102.20

Note that occurrences of the `ENCLOSED BY' character within a field
value are escaped by prefixing them with the `ESCAPED BY' character.
Also note that if you specify an empty `ESCAPED BY' value, it is
possible to inadvertently generate output that cannot be read properly
by *Note `LOAD DATA INFILE': load-data. For example, the preceding
output just shown would appear as follows if the escape character is
empty. Observe that the second field in the fourth line contains a comma
following the quote, which (erroneously) appears to terminate the field:

     1,"a string",100.20
     2,"a string containing a , comma",102.20
     3,"a string containing a " quote",102.20
     4,"a string containing a ", quote and comma",102.20

For input, the `ENCLOSED BY' character, if present, is stripped from
the ends of field values. (This is true regardless of whether
`OPTIONALLY' is specified; `OPTIONALLY' has no effect on input
interpretation.) Occurrences of the `ENCLOSED BY' character preceded by
the `ESCAPED BY' character are interpreted as part of the current field
value.

If the field begins with the `ENCLOSED BY' character, instances of that
character are recognized as terminating a field value only if followed
by the field or line `TERMINATED BY' sequence. To avoid ambiguity,
occurrences of the `ENCLOSED BY' character within a field value can be
doubled and are interpreted as a single instance of the character. For
example, if `ENCLOSED BY '"'' is specified, quotation marks are handled
as shown here:

     "The ""BIG"" boss"  -> The "BIG" boss
     The "BIG" boss      -> The "BIG" boss
     The ""BIG"" boss    -> The ""BIG"" boss

`FIELDS ESCAPED BY' controls how to read or write special characters:

   * For input, if the `FIELDS ESCAPED BY' character is not empty,
     occurrences of that character are stripped and the following
     character is taken literally as part of a field value. Some
     two-character sequences that are exceptions, where the first
     character is the escape character.  These sequences are shown in
     the following table (using ``\'' for the escape character).  The
     rules for `NULL' handling are described later in this section.

     This table lists two-character sequences for which the first
     character (a ``\'') is the escape character.

     Character  Escape Sequence
     `\0'       An ASCII NUL (`0x00') character
     `\b'       A backspace character
     `\n'       A newline (linefeed) character
     `\r'       A carriage return character
     `\t'       A tab character.
     `\Z'       ASCII 26 (Control+Z)
     `\N'       NULL

     For more information about ``\''-escape syntax, see *Note
     string-literals::.

     If the `FIELDS ESCAPED BY' character is empty, escape-sequence
     interpretation does not occur.

   * For output, if the `FIELDS ESCAPED BY' character is not empty, it
     is used to prefix the following characters on output:

        * The `FIELDS ESCAPED BY' character

        * The `FIELDS [OPTIONALLY] ENCLOSED BY' character

        * The first character of the `FIELDS TERMINATED BY' and `LINES
          TERMINATED BY' values

        * ASCII `0' (what is actually written following the escape
          character is ASCII ``0'', not a zero-valued byte)

     If the `FIELDS ESCAPED BY' character is empty, no characters are
     escaped and `NULL' is output as `NULL', not `\N'. It is probably
     not a good idea to specify an empty escape character, particularly
     if field values in your data contain any of the characters in the
     list just given.

In certain cases, field- and line-handling options interact:

   * If `LINES TERMINATED BY' is an empty string and `FIELDS TERMINATED
     BY' is nonempty, lines are also terminated with `FIELDS TERMINATED
     BY'.

   * If the `FIELDS TERMINATED BY' and `FIELDS ENCLOSED BY' values are
     both empty (`'''), a fixed-row (nondelimited) format is used. With
     fixed-row format, no delimiters are used between fields (but you
     can still have a line terminator). Instead, column values are read
     and written using a field width wide enough to hold all values in
     the field. For *Note `TINYINT': integer-types, *Note `SMALLINT':
     integer-types, *Note `MEDIUMINT': integer-types, *Note `INT':
     integer-types, and *Note `BIGINT': integer-types, the field widths
     are 4, 6, 8, 11, and 20, respectively, no matter what the declared
     display width is.

     `LINES TERMINATED BY' is still used to separate lines. If a line
     does not contain all fields, the rest of the columns are set to
     their default values. If you do not have a line terminator, you
     should set this to `'''. In this case, the text file must contain
     all fields for each row.

     Fixed-row format also affects handling of `NULL' values, as
     described later. Note that fixed-size format does not work if you
     are using a multi-byte character set.

Handling of `NULL' values varies according to the `FIELDS' and `LINES'
options in use:

   * For the default `FIELDS' and `LINES' values, `NULL' is written as
     a field value of `\N' for output, and a field value of `\N' is
     read as `NULL' for input (assuming that the `ESCAPED BY' character
     is ``\'').

   * If `FIELDS ENCLOSED BY' is not empty, a field containing the
     literal word `NULL' as its value is read as a `NULL' value. This
     differs from the word `NULL' enclosed within `FIELDS ENCLOSED BY'
     characters, which is read as the string `'NULL''.

   * If `FIELDS ESCAPED BY' is empty, `NULL' is written as the word
     `NULL'.

   * With fixed-row format (which is used when `FIELDS TERMINATED BY'
     and `FIELDS ENCLOSED BY' are both empty), `NULL' is written as an
     empty string. Note that this causes both `NULL' values and empty
     strings in the table to be indistinguishable when written to the
     file because both are written as empty strings. If you need to be
     able to tell the two apart when reading the file back in, you
     should not use fixed-row format.

An attempt to load `NULL' into a `NOT NULL' column causes assignment of
the implicit default value for the column's data type and a warning, or
an error in strict SQL mode. Implicit default values are discussed in
*Note data-type-defaults::.

Some cases are not supported by *Note `LOAD DATA INFILE': load-data.:

   * Fixed-size rows (`FIELDS TERMINATED BY' and `FIELDS ENCLOSED BY'
     both empty) and *Note `BLOB': blob. or *Note `TEXT': blob. columns.

   * If you specify one separator that is the same as or a prefix of
     another, *Note `LOAD DATA INFILE': load-data. cannot interpret the
     input properly. For example, the following `FIELDS' clause would
     cause problems:

          FIELDS TERMINATED BY '"' ENCLOSED BY '"'

   * If `FIELDS ESCAPED BY' is empty, a field value that contains an
     occurrence of `FIELDS ENCLOSED BY' or `LINES TERMINATED BY'
     followed by the `FIELDS TERMINATED BY' value causes *Note `LOAD
     DATA INFILE': load-data. to stop reading a field or line too early.
     This happens because *Note `LOAD DATA INFILE': load-data. cannot
     properly determine where the field or line value ends.

The following example loads all columns of the `persondata' table:

     LOAD DATA INFILE 'persondata.txt' INTO TABLE persondata;

By default, when no column list is provided at the end of the *Note
`LOAD DATA INFILE': load-data. statement, input lines are expected to
contain a field for each table column. If you want to load only some of
a table's columns, specify a column list:

     LOAD DATA INFILE 'persondata.txt' INTO TABLE persondata (col1,col2,...);

You must also specify a column list if the order of the fields in the
input file differs from the order of the columns in the table.
Otherwise, MySQL cannot tell how to match input fields with table
columns.

The column list can contain either column names or user variables.
With user variables, the `SET' clause enables you to perform
transformations on their values before assigning the result to columns.

User variables in the `SET' clause can be used in several ways. The
following example uses the first input column directly for the value of
`t1.column1', and assigns the second input column to a user variable
that is subjected to a division operation before being used for the
value of `t1.column2':

     LOAD DATA INFILE 'file.txt'
       INTO TABLE t1
       (column1, @var1)
       SET column2 = @var1/100;

The `SET' clause can be used to supply values not derived from the
input file. The following statement sets `column3' to the current date
and time:

     LOAD DATA INFILE 'file.txt'
       INTO TABLE t1
       (column1, column2)
       SET column3 = CURRENT_TIMESTAMP;

You can also discard an input value by assigning it to a user variable
and not assigning the variable to a table column:

     LOAD DATA INFILE 'file.txt'
       INTO TABLE t1
       (column1, @dummy, column2, @dummy, column3);

Use of the column/variable list and `SET' clause is subject to the
following restrictions:

   * Assignments in the `SET' clause should have only column names on
     the left hand side of assignment operators.

   * You can use subqueries in the right hand side of `SET'
     assignments. A subquery that returns a value to be assigned to a
     column may be a scalar subquery only. Also, you cannot use a
     subquery to select from the table that is being loaded.

   * Lines ignored by an `IGNORE' clause are not processed for the
     column/variable list or `SET' clause.

   * User variables cannot be used when loading data with fixed-row
     format because user variables do not have a display width.

When processing an input line, *Note `LOAD DATA': load-data. splits it
into fields and uses the values according to the column/variable list
and the `SET' clause, if they are present. Then the resulting row is
inserted into the table. If there are `BEFORE INSERT' or `AFTER INSERT'
triggers for the table, they are activated before or after inserting
the row, respectively.

If an input line has too many fields, the extra fields are ignored and
the number of warnings is incremented.

If an input line has too few fields, the table columns for which input
fields are missing are set to their default values. Default value
assignment is described in *Note data-type-defaults::.

An empty field value is interpreted different from a missing field:

   * For string types, the column is set to the empty string.

   * For numeric types, the column is set to `0'.

   * For date and time types, the column is set to the appropriate
     `zero' value for the type. See *Note date-and-time-types::.

These are the same values that result if you assign an empty string
explicitly to a string, numeric, or date or time type explicitly in an
*Note `INSERT': insert. or *Note `UPDATE': update. statement.

Treatment of empty or incorrect field values differs from that just
described if the SQL mode is set to a restrictive value. For example, if
`sql_mode='TRADITIONAL', conversion of an empty value or a value such
as `'x'' for a numeric column results in an error, not conversion to 0.
(With `LOCAL', warnings occur rather than errors, even with a
restrictive `sql_mode' value, because the server has no way to stop
transmission of the file in the middle of the operation.)

*Note `TIMESTAMP': datetime. columns are set to the current date and
time only if there is a `NULL' value for the column (that is, `\N') and
the column is not declared to permit `NULL' values, or if the *Note
`TIMESTAMP': datetime. column's default value is the current timestamp
and it is omitted from the field list when a field list is specified.

*Note `LOAD DATA INFILE': load-data. regards all input as strings, so
you cannot use numeric values for *Note `ENUM': enum. or *Note `SET':
set. columns the way you can with *Note `INSERT': insert. statements.
All *Note `ENUM': enum. and *Note `SET': set. values must be specified
as strings.

*Note `BIT': bit-type. values cannot be loaded using binary notation
(for example, `b'011010''). To work around this, specify the values as
regular integers and use the `SET' clause to convert them so that MySQL
performs a numeric type conversion and loads them into the *Note `BIT':
bit-type. column properly:

     shell> cat /tmp/bit_test.txt
     2
     127
     shell> mysql test
     mysql> LOAD DATA INFILE '/tmp/bit_test.txt'
         -> INTO TABLE bit_test (@var1) SET b = CAST(@var1 AS UNSIGNED);
     Query OK, 2 rows affected (0.00 sec)
     Records: 2  Deleted: 0  Skipped: 0  Warnings: 0

     mysql> SELECT BIN(b+0) FROM bit_test;
     +----------+
     | bin(b+0) |
     +----------+
     | 10       |
     | 1111111  |
     +----------+
     2 rows in set (0.00 sec)

On Unix, if you need *Note `LOAD DATA': load-data. to read from a pipe,
you can use the following technique (the example loads a listing of the
`/' directory into the table `db1.t1'):

     mkfifo /mysql/data/db1/ls.dat
     chmod 666 /mysql/data/db1/ls.dat
     find / -ls > /mysql/data/db1/ls.dat &
     mysql -e "LOAD DATA INFILE 'ls.dat' INTO TABLE t1" db1

Note that you must run the command that generates the data to be loaded
and the *Note `mysql': mysql. commands either on separate terminals, or
run the data generation process in the background (as shown in the
preceding example). If you do not do this, the pipe will block until
data is read by the *Note `mysql': mysql. process.

When the *Note `LOAD DATA INFILE': load-data. statement finishes, it
returns an information string in the following format:

     Records: 1  Deleted: 0  Skipped: 0  Warnings: 0

Warnings occur under the same circumstances as when values are inserted
using the *Note `INSERT': insert. statement (see *Note insert::),
except that *Note `LOAD DATA INFILE': load-data. also generates
warnings when there are too few or too many fields in the input row.

You can use *Note `SHOW WARNINGS': show-warnings. to get a list of the
first `max_error_count' warnings as information about what went wrong.
See *Note show-warnings::.

If you are using the C API, you can get information about the statement
by calling the *Note `mysql_info()': mysql-info. function. See *Note
mysql-info::.

For partitioned tables using storage engines that employ table locks,
such as *Note `MyISAM': myisam-storage-engine, any locks caused by
`LOAD DATA' perform locks on all partitions of the table. This does not
apply to tables using storage engines which employ row-level locking,
such as *Note `InnoDB': innodb-storage-engine. For more information, see
*Note partitioning-limitations-locking::.


File: manual.info,  Node: load-xml,  Next: replace,  Prev: load-data,  Up: sql-syntax-data-manipulation

13.2.7 `LOAD XML' Syntax
------------------------

     LOAD XML [LOW_PRIORITY | CONCURRENT] [LOCAL] INFILE 'FILE_NAME'
         [REPLACE | IGNORE]
         INTO TABLE [DB_NAME.]TBL_NAME
         [CHARACTER SET CHARSET_NAME]
         [ROWS IDENTIFIED BY '<TAGNAME>']
         [IGNORE NUMBER {LINES | ROWS}]
         [(COLUMN_OR_USER_VAR,...)]
         [SET COL_NAME = EXPR,...]

The *Note `LOAD XML': load-xml. statement reads data from an XML file
into a table. The FILE_NAME must be given as a literal string. The
TAGNAME in the optional `ROWS IDENTIFIED BY' clause must also be given
as a literal string, and must be surrounded by angle brackets (`<' and
`>').

*Note `LOAD XML': load-xml. acts as the complement of running the *Note
`mysql': mysql. client in XML output mode (that is, starting the client
with the `--xml' option). To write data from a table to an XML file,
use a command such as the following one from the system shell:

     shell> mysql --xml -e 'SELECT * FROM mytable' > file.xml

To read the file back into a table, use *Note `LOAD XML INFILE':
load-xml. By default, the `<row>' element is considered to be the
equivalent of a database table row; this can be changed using the `ROWS
IDENTIFIED BY' clause.

This statement supports three different XML formats:

   * Column names as attributes and column values as attribute values:

          <ROW COLUMN1="VALUE1" COLUMN2="VALUE2" .../>

   * Column names as tags and column values as the content of these
     tags:

          <ROW>
            <COLUMN1>VALUE1</COLUMN1>
            <COLUMN2>VALUE2</COLUMN2>
          </ROW>

   * Column names are the `name' attributes of `<field>' tags, and
     values are the contents of these tags:

          <row>
            <field name='COLUMN1'>VALUE1</field>
            <field name='COLUMN2'>VALUE2</field>
          </row>

     This is the format used by other MySQL tools, such as *Note
     `mysqldump': mysqldump.

All 3 formats can be used in the same XML file; the import routine
automatically detects the format for each row and interprets it
correctly. Tags are matched based on the tag or attribute name and the
column name.

The following clauses work essentially the same way for *Note `LOAD
XML': load-xml. as they do for *Note `LOAD DATA': load-data.:

   * `LOW_PRIORITY' or `CONCURRENT'

   * `LOCAL'

   * `REPLACE' or `IGNORE'

   * `CHARACTER SET'

   * `(COLUMN_OR_USER_VAR,...)'

   * `SET'

See *Note load-data::, for more information about these clauses.

The `IGNORE NUMBER LINES' or `IGNORE NUMBER ROWS' clause causes the
first NUMBER rows in the XML file to be skipped. It is analogous to the
*Note `LOAD DATA': load-data. statement's `IGNORE ... LINES' clause.

To illustrate how this statement is used, suppose that we have a table
created as follows:

     USE test;

     CREATE TABLE person (
         person_id INT NOT NULL PRIMARY KEY,
         fname VARCHAR(40) NULL,
         lname VARCHAR(40) NULL,
         created TIMESTAMP
     );

Suppose further that this table is initially empty.

Now suppose that we have a simple XML file `person.xml', whose contents
are as shown here:

     <?xml version="1.0"?>
     <list>
       <person person_id="1" fname="Pekka" lname="Nousiainen"/>
       <person person_id="2" fname="Jonas" lname="Oreland"/>
       <person person_id="3"><fname>Mikael</fname><lname>Ronstro"m</lname></person>
       <person person_id="4"><fname>Lars</fname><lname>Thalmann</lname></person>
       <person><field name="person_id">5</field><field name="fname">Tomas</field>
       <field name="lname">Ulin</field></person>
       <person><field name="person_id">6</field><field name="fname">Martin</field>
       <field name="lname">Sko"ld</field></person>
     </list>

Each of the permissible XML formats discussed previously is represented
in this example file.

To import the data in `person.xml' into the `person' table, you can use
this statement:

     mysql> LOAD XML LOCAL INFILE 'person.xml'
         ->   INTO TABLE person
         ->   ROWS IDENTIFIED BY '<person>';

     Query OK, 6 rows affected (0.00 sec)
     Records: 6  Deleted: 0  Skipped: 0  Warnings: 0

Here, we assume that `person.xml' is located in the MySQL data
directory. If the file cannot be found, the following error results:

     `ERROR 2 (HY000): File '/person.xml' not found (Errcode: 2)'

The `ROWS IDENTIFIED BY '<person>'' clause means that each `<person>'
element in the XML file is considered equivalent to a row in the table
into which the data is to be imported. In this case, this is the
`person' table in the `test' database.

As can be seen by the response from the server, 6 rows were imported
into the `test.person' table. This can be verified by a simple *Note
`SELECT': select.  statement:

     mysql> SELECT * FROM person;
     +-----------+--------+------------+---------------------+
     | person_id | fname  | lname      | created             |
     +-----------+--------+------------+---------------------+
     |         1 | Pekka  | Nousiainen | 2007-07-13 16:18:47 |
     |         2 | Jonas  | Oreland    | 2007-07-13 16:18:47 |
     |         3 | Mikael | Ronstro"m   | 2007-07-13 16:18:47 |
     |         4 | Lars   | Thalmann   | 2007-07-13 16:18:47 |
     |         5 | Tomas  | Ulin       | 2007-07-13 16:18:47 |
     |         6 | Martin | Sko"ld      | 2007-07-13 16:18:47 |
     +-----------+--------+------------+---------------------+
     6 rows in set (0.00 sec)

This shows, as stated earlier in this section, that any or all of the 3
permitted XML formats may appear in a single file and be read in using
*Note `LOAD XML': load-xml.

The inverse of the above operation--that is, dumping MySQL table data
into an XML file--can be accomplished using the mysql client from the
system shell, as shown here:

*Note*:

The `--xml' option causes the *Note `mysql': mysql. client to use XML
formatting for its output; the `-e' option causes the client to execute
the SQL statement immediately following the option.

     shell> mysql --xml -e "SELECT * FROM test.person" > person-dump.xml
     shell> cat person-dump.xml
     <?xml version="1.0"?>

     <resultset statement="SELECT * FROM test.person" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
       <row>
             <field name="person_id">1</field>
             <field name="fname">Pekka</field>
             <field name="lname">Nousiainen</field>
             <field name="created">2007-07-13 16:18:47</field>
       </row>

       <row>
             <field name="person_id">2</field>
             <field name="fname">Jonas</field>
             <field name="lname">Oreland</field>
             <field name="created">2007-07-13 16:18:47</field>
       </row>

       <row>
             <field name="person_id">3</field>
             <field name="fname">Mikael</field>
             <field name="lname">Ronstro"m</field>
             <field name="created">2007-07-13 16:18:47</field>
       </row>

       <row>
             <field name="person_id">4</field>
             <field name="fname">Lars</field>
             <field name="lname">Thalmann</field>
             <field name="created">2007-07-13 16:18:47</field>
       </row>

       <row>
             <field name="person_id">5</field>
             <field name="fname">Tomas</field>
             <field name="lname">Ulin</field>
             <field name="created">2007-07-13 16:18:47</field>
       </row>

       <row>
             <field name="person_id">6</field>
             <field name="fname">Martin</field>
             <field name="lname">Sko"ld</field>
             <field name="created">2007-07-13 16:18:47</field>
       </row>
     </resultset>

You can verify that the dump is valid by creating a copy of the
`person' and then importing the dump file into the new table, like this:

     mysql> USE test;
     mysql> CREATE TABLE person2 LIKE person;
     Query OK, 0 rows affected (0.00 sec)

     mysql> LOAD XML LOCAL INFILE 'person-dump.xml'
         ->   INTO TABLE person2;
     Query OK, 6 rows affected (0.01 sec)
     Records: 6  Deleted: 0  Skipped: 0  Warnings: 0

     mysql> SELECT * FROM person2;
     +-----------+--------+------------+---------------------+
     | person_id | fname  | lname      | created             |
     +-----------+--------+------------+---------------------+
     |         1 | Pekka  | Nousiainen | 2007-07-13 16:18:47 |
     |         2 | Jonas  | Oreland    | 2007-07-13 16:18:47 |
     |         3 | Mikael | Ronstro"m   | 2007-07-13 16:18:47 |
     |         4 | Lars   | Thalmann   | 2007-07-13 16:18:47 |
     |         5 | Tomas  | Ulin       | 2007-07-13 16:18:47 |
     |         6 | Martin | Sko"ld      | 2007-07-13 16:18:47 |
     +-----------+--------+------------+---------------------+
     6 rows in set (0.00 sec)

Using a `ROWS IDENTIFIED BY '<TAGNAME>'' clause, it is possible to
import data from the same XML file into database tables with different
definitions. For this example, suppose that you have a file named
`address.xml' which contains the following XML:

     <?xml version="1.0"?>

     <list>
       <person person_id="1">
         <fname>Robert</fname>
         <lname>Jones</lname>
         <address address_id="1" street="Mill Creek Road" zip="45365" city="Sidney"/>
         <address address_id="2" street="Main Street" zip="28681" city="Taylorsville"/>
       </person>

       <person person_id="2">
         <fname>Mary</fname>
         <lname>Smith</lname>
         <address address_id="3" street="River Road" zip="80239" city="Denver"/>
         <!-- <address address_id="4" street="North Street" zip="37920" city="Knoxville"/> -->
       </person>

     </list>

You can again use the `test.person' table as defined previously in this
section, after clearing all the existing records from the table and
then showing its structure as shown here:

     mysql< TRUNCATE person;
     Query OK, 0 rows affected (0.04 sec)

     mysql< SHOW CREATE TABLE person\G
     *************************** 1. row ***************************
            Table: person
     Create Table: CREATE TABLE `person` (
       `person_id` int(11) NOT NULL,
       `fname` varchar(40) DEFAULT NULL,
       `lname` varchar(40) DEFAULT NULL,
       `created` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
       PRIMARY KEY (`person_id`)
     ) ENGINE=MyISAM DEFAULT CHARSET=latin1
     1 row in set (0.00 sec)

Now create an `address' table in the `test' database using the following
*Note `CREATE TABLE': create-table. statement:

     CREATE TABLE address (
         address_id INT NOT NULL PRIMARY KEY,
         person_id INT NULL,
         street VARCHAR(40) NULL,
         zip INT NULL,
         city VARCHAR(40) NULL,
         created TIMESTAMP
     );

To import the data from the XML file into the `person' table, execute
the following *Note `LOAD XML': load-xml. statement, which specifies
that rows are to be specified by the `<person>' element, as shown here;

     mysql> LOAD XML LOCAL INFILE 'address.xml'
         ->   INTO TABLE person
         ->   ROWS IDENTIFIED BY '<person>';
     Query OK, 2 rows affected (0.00 sec)
     Records: 2  Deleted: 0  Skipped: 0  Warnings: 0

You can verify that the records were imported using a *Note `SELECT':
select. statement:

     mysql> SELECT * FROM person;
     +-----------+--------+-------+---------------------+
     | person_id | fname  | lname | created             |
     +-----------+--------+-------+---------------------+
     |         1 | Robert | Jones | 2007-07-24 17:37:06 |
     |         2 | Mary   | Smith | 2007-07-24 17:37:06 |
     +-----------+--------+-------+---------------------+
     2 rows in set (0.00 sec)

Since the `<address>' elements in the XML file have no corresponding
columns in the `person' table, they are skipped.

To import the data from the `<address>' elements into the `address'
table, use the *Note `LOAD XML': load-xml. statement shown here:

     mysql> LOAD XML LOCAL INFILE 'address.xml'
         ->   INTO TABLE address
         ->   ROWS IDENTIFIED BY '<address>';
     Query OK, 3 rows affected (0.00 sec)
     Records: 3  Deleted: 0  Skipped: 0  Warnings: 0

You can see that the data was imported using a *Note `SELECT': select.
statement such as this one:

     mysql> SELECT * FROM address;
     +------------+-----------+-----------------+-------+--------------+---------------------+
     | address_id | person_id | street          | zip   | city         | created             |
     +------------+-----------+-----------------+-------+--------------+---------------------+
     |          1 |         1 | Mill Creek Road | 45365 | Sidney       | 2007-07-24 17:37:37 |
     |          2 |         1 | Main Street     | 28681 | Taylorsville | 2007-07-24 17:37:37 |
     |          3 |         2 | River Road      | 80239 | Denver       | 2007-07-24 17:37:37 |
     +------------+-----------+-----------------+-------+--------------+---------------------+
     3 rows in set (0.00 sec)

The data from the `<address>' element that is enclosed in XML comments
is not imported. However, since there is a `person_id' column in the
`address' table, the value of the `person_id' attribute from the parent
`<person>' element for each `<address>' _is_ imported into the
`address' table.

Security Considerations

As with the *Note `LOAD DATA': load-data. statement, the transfer of
the XML file from the client host to the server host is initiated by
the MySQL server. In theory, a patched server could be built that would
tell the client program to transfer a file of the server's choosing
rather than the file named by the client in the *Note `LOAD XML':
load-xml. statement. Such a server could access any file on the client
host to which the client user has read access.

In a Web environment, clients usually connect to MySQL from a Web
server. A user that can run any command against the MySQL server can
use *Note `LOAD XML LOCAL': load-xml. to read any files to which the
Web server process has read access. In this environment, the client
with respect to the MySQL server is actually the Web server, not the
remote program being run by the user who connects to the Web server.

You can disable loading of XML files from clients by starting the
server with `--local-infile=0' or `--local-infile=OFF'. This option can
also be used when starting the *Note `mysql': mysql. client to disable
*Note `LOAD XML': load-xml. for the duration of the client session.

To prevent a client from loading XML files from the server, do not
grant the `FILE' privilege to the corresponding MySQL user account, or
revoke this privilege if the client user account already has it.

*Important*:

Revoking the `FILE' privilege (or not granting it in the first place)
keeps the user only from executing the *Note `LOAD XML INFILE':
load-xml. statement (as well as the `LOAD_FILE()' function; it does
_not_ prevent the user from executing *Note `LOAD XML LOCAL INFILE':
load-xml. To disallow this statement, you must start the server or the
client with `--local-infile=OFF'.

In other words, the `FILE' privilege affects only whether the client
can read files on the server; it has no bearing on whether the client
can read files on the local file system.

For partitioned tables using storage engines that employ table locks,
such as *Note `MyISAM': myisam-storage-engine, any locks caused by
`LOAD XML' perform locks on all partitions of the table. This does not
apply to tables using storage engines which employ row-level locking,
such as *Note `InnoDB': innodb-storage-engine. For more information, see
*Note partitioning-limitations-locking::.


File: manual.info,  Node: replace,  Next: select,  Prev: load-xml,  Up: sql-syntax-data-manipulation

13.2.8 `REPLACE' Syntax
-----------------------

     REPLACE [LOW_PRIORITY | DELAYED]
         [INTO] TBL_NAME [(COL_NAME,...)]
         {VALUES | VALUE} ({EXPR | DEFAULT},...),(...),...

Or:

     REPLACE [LOW_PRIORITY | DELAYED]
         [INTO] TBL_NAME
         SET COL_NAME={EXPR | DEFAULT}, ...

Or:

     REPLACE [LOW_PRIORITY | DELAYED]
         [INTO] TBL_NAME [(COL_NAME,...)]
         SELECT ...

*Note `REPLACE': replace. works exactly like *Note `INSERT': insert,
except that if an old row in the table has the same value as a new row
for a `PRIMARY KEY' or a `UNIQUE' index, the old row is deleted before
the new row is inserted. See *Note insert::.

*Note `REPLACE': replace. is a MySQL extension to the SQL standard. It
either inserts, or _deletes_ and inserts. For another MySQL extension
to standard SQL--that either inserts or _updates_--see *Note
insert-on-duplicate::.

Note that unless the table has a `PRIMARY KEY' or `UNIQUE' index, using
a *Note `REPLACE': replace. statement makes no sense.  It becomes
equivalent to *Note `INSERT': insert, because there is no index to be
used to determine whether a new row duplicates another.

Values for all columns are taken from the values specified in the *Note
`REPLACE': replace. statement. Any missing columns are set to their
default values, just as happens for *Note `INSERT': insert. You cannot
refer to values from the current row and use them in the new row. If
you use an assignment such as `SET COL_NAME = COL_NAME + 1', the
reference to the column name on the right hand side is treated as
`DEFAULT(COL_NAME)', so the assignment is equivalent to `SET COL_NAME =
DEFAULT(COL_NAME) + 1'.

To use *Note `REPLACE': replace, you must have both the `INSERT' and
`DELETE' privileges for the table.

The *Note `REPLACE': replace. statement returns a count to indicate the
number of rows affected. This is the sum of the rows deleted and
inserted. If the count is 1 for a single-row *Note `REPLACE': replace,
a row was inserted and no rows were deleted. If the count is greater
than 1, one or more old rows were deleted before the new row was
inserted. It is possible for a single row to replace more than one old
row if the table contains multiple unique indexes and the new row
duplicates values for different old rows in different unique indexes.

The affected-rows count makes it easy to determine whether *Note
`REPLACE': replace. only added a row or whether it also replaced any
rows: Check whether the count is 1 (added) or greater (replaced).

If you are using the C API, the affected-rows count can be obtained
using the *Note `mysql_affected_rows()': mysql-affected-rows. function.

Currently, you cannot replace into a table and select from the same
table in a subquery.

MySQL uses the following algorithm for *Note `REPLACE': replace. (and
`LOAD DATA ...  REPLACE'):

  1. Try to insert the new row into the table

  2. While the insertion fails because a duplicate-key error occurs for
     a primary key or unique index:

       1. Delete from the table the conflicting row that has the
          duplicate key value

       2. Try again to insert the new row into the table

It is possible that in the case of a duplicate-key error, a storage
engine may perform the `REPLACE' as an update rather than a delete plus
insert, but the semantics are the same. There are no user-visible
effects other than a possible difference in how the storage engine
increments `Handler_XXX' status variables.

Because the results of `REPLACE ... SELECT' statements depend on the
ordering of rows from the *Note `SELECT': select. and this order cannot
always be guaranteed, it is possible when logging these statements for
the master and the slave to diverge. For this reason, in MySQL 5.5.18
and later, `REPLACE ... SELECT' statements are flagged as unsafe for
statement-based replication. With this change, such statements produce
a warning in the log when using the `STATEMENT' binary logging mode,
and are logged using the row-based format when using `MIXED' mode. See
also *Note replication-sbr-rbr::.

A `REPLACE'statement that acts on a partitioned table using a storage
engine such as *Note `MyISAM': myisam-storage-engine. that employs
table-level locks locks all partitions of the table. This does not
occur with tables using storage engines such as *Note `InnoDB':
innodb-storage-engine.  that employ row-level locking. This issue is
resolved in MySQL 5.6. See *Note partitioning-limitations-locking::, for
more information.


File: manual.info,  Node: select,  Next: subqueries,  Prev: replace,  Up: sql-syntax-data-manipulation

13.2.9 `SELECT' Syntax
----------------------

* Menu:

* select-into::                  `SELECT ... INTO' Syntax
* join::                         `JOIN' Syntax
* index-hints::                  Index Hint Syntax
* union::                        `UNION' Syntax

     SELECT
         [ALL | DISTINCT | DISTINCTROW ]
           [HIGH_PRIORITY]
           [STRAIGHT_JOIN]
           [SQL_SMALL_RESULT] [SQL_BIG_RESULT] [SQL_BUFFER_RESULT]
           [SQL_CACHE | SQL_NO_CACHE] [SQL_CALC_FOUND_ROWS]
         SELECT_EXPR [, SELECT_EXPR ...]
         [FROM TABLE_REFERENCES
         [WHERE WHERE_CONDITION]
         [GROUP BY {COL_NAME | EXPR | POSITION}
           [ASC | DESC], ... [WITH ROLLUP]]
         [HAVING WHERE_CONDITION]
         [ORDER BY {COL_NAME | EXPR | POSITION}
           [ASC | DESC], ...]
         [LIMIT {[OFFSET,] ROW_COUNT | ROW_COUNT OFFSET OFFSET}]
         [PROCEDURE PROCEDURE_NAME(ARGUMENT_LIST)]
         [INTO OUTFILE 'FILE_NAME'
             [CHARACTER SET CHARSET_NAME]
             EXPORT_OPTIONS
           | INTO DUMPFILE 'FILE_NAME'
           | INTO VAR_NAME [, VAR_NAME]]
         [FOR UPDATE | LOCK IN SHARE MODE]]

*Note `SELECT': select. is used to retrieve rows selected from one or
more tables, and can include *Note `UNION': union. statements and
subqueries.  See *Note union::, and *Note subqueries::.

The most commonly used clauses of *Note `SELECT': select. statements
are these:

   * Each SELECT_EXPR indicates a column that you want to retrieve.
     There must be at least one SELECT_EXPR.

   * TABLE_REFERENCES indicates the table or tables from which to
     retrieve rows. Its syntax is described in *Note join::.

   * The `WHERE' clause, if given, indicates the condition or
     conditions that rows must satisfy to be selected.  WHERE_CONDITION
     is an expression that evaluates to true for each row to be
     selected. The statement selects all rows if there is no `WHERE'
     clause.

     In the `WHERE' expression, you can use any of the functions and
     operators that MySQL supports, except for aggregate (summary)
     functions. See *Note expressions::, and *Note functions::.

*Note `SELECT': select. can also be used to retrieve rows computed
without reference to any table.

For example:

     mysql> SELECT 1 + 1;
             -> 2

You are permitted to specify `DUAL' as a dummy table name in situations
where no tables are referenced:

     mysql> SELECT 1 + 1 FROM DUAL;
             -> 2

`DUAL' is purely for the convenience of people who require that all
*Note `SELECT': select.  statements should have `FROM' and possibly
other clauses. MySQL may ignore the clauses. MySQL does not require
`FROM DUAL' if no tables are referenced.

In general, clauses used must be given in exactly the order shown in
the syntax description. For example, a `HAVING' clause must come after
any `GROUP BY' clause and before any `ORDER BY' clause. The exception
is that the `INTO' clause can appear either as shown in the syntax
description or immediately following the SELECT_EXPR list. For more
information about `INTO', see *Note select-into::.

The list of SELECT_EXPR terms comprises the select list that indicates
which columns to retrieve. Terms specify a column or expression or can
use `*'-shorthand:

   * A select list consisting only of a single unqualified `*' can be
     used as shorthand to select all columns from all tables:

          SELECT * FROM t1 INNER JOIN t2 ...

   * `TBL_NAME.*' can be used as a qualified shorthand to select all
     columns from the named table:

          SELECT t1.*, t2.* FROM t1 INNER JOIN t2 ...

   * Use of an unqualified `*' with other items in the select list may
     produce a parse error. To avoid this problem, use a qualified
     `TBL_NAME.*' reference

          SELECT AVG(score), t1.* FROM t1 ...

The following list provides additional information about other `SELECT'
clauses:

   * A SELECT_EXPR can be given an alias using `AS ALIAS_NAME'. The
     alias is used as the expression's column name and can be used in
     `GROUP BY', `ORDER BY', or `HAVING' clauses. For example:

          SELECT CONCAT(last_name,', ',first_name) AS full_name
            FROM mytable ORDER BY full_name;

     The `AS' keyword is optional when aliasing a SELECT_EXPR with an
     identifier. The preceding example could have been written like
     this:

          SELECT CONCAT(last_name,', ',first_name) full_name
            FROM mytable ORDER BY full_name;

     However, because the `AS' is optional, a subtle problem can occur
     if you forget the comma between two SELECT_EXPR expressions: MySQL
     interprets the second as an alias name. For example, in the
     following statement, `columnb' is treated as an alias name:

          SELECT columna columnb FROM mytable;

     For this reason, it is good practice to be in the habit of using
     `AS' explicitly when specifying column aliases.

     It is not permissible to refer to a column alias in a `WHERE'
     clause, because the column value might not yet be determined when
     the `WHERE' clause is executed. See *Note problems-with-alias::.

   * The `FROM TABLE_REFERENCES' clause indicates the table or tables
     from which to retrieve rows. If you name more than one table, you
     are performing a join. For information on join syntax, see *Note
     join::. For each table specified, you can optionally specify an
     alias.

          TBL_NAME [[AS] ALIAS] [INDEX_HINT]

     The use of index hints provides the optimizer with information
     about how to choose indexes during query processing. For a
     description of the syntax for specifying these hints, see *Note
     index-hints::.

     You can use `SET max_seeks_for_key=VALUE' as an alternative way to
     force MySQL to prefer key scans instead of table scans. See *Note
     server-system-variables::.

   * You can refer to a table within the default database as TBL_NAME,
     or as DB_NAME.TBL_NAME to specify a database explicitly. You can
     refer to a column as COL_NAME, TBL_NAME.COL_NAME, or
     DB_NAME.TBL_NAME.COL_NAME.  You need not specify a TBL_NAME or
     DB_NAME.TBL_NAME prefix for a column reference unless the
     reference would be ambiguous. See *Note identifier-qualifiers::,
     for examples of ambiguity that require the more explicit column
     reference forms.

   * A table reference can be aliased using `TBL_NAME AS ALIAS_NAME' or
     TBL_NAME ALIAS_NAME:

          SELECT t1.name, t2.salary FROM employee AS t1, info AS t2
            WHERE t1.name = t2.name;

          SELECT t1.name, t2.salary FROM employee t1, info t2
            WHERE t1.name = t2.name;

   * Columns selected for output can be referred to in `ORDER BY' and
     `GROUP BY' clauses using column names, column aliases, or column
     positions. Column positions are integers and begin with 1:

          SELECT college, region, seed FROM tournament
            ORDER BY region, seed;

          SELECT college, region AS r, seed AS s FROM tournament
            ORDER BY r, s;

          SELECT college, region, seed FROM tournament
            ORDER BY 2, 3;

     To sort in reverse order, add the `DESC' (descending) keyword to
     the name of the column in the `ORDER BY' clause that you are
     sorting by.  The default is ascending order; this can be specified
     explicitly using the `ASC' keyword.

     If `ORDER BY' occurs within a subquery and also is applied in the
     outer query, the outermost `ORDER BY' takes precedence. For
     example, results for the following statement are sorted in
     descending order, not ascending order:

          (SELECT ... ORDER BY a) ORDER BY a DESC;

     Use of column positions is deprecated because the syntax has been
     removed from the SQL standard.

   * If you use `GROUP BY', output rows are sorted according to the
     `GROUP BY' columns as if you had an `ORDER BY' for the same
     columns. To avoid the overhead of sorting that `GROUP BY'
     produces, add `ORDER BY NULL':

          SELECT a, COUNT(b) FROM test_table GROUP BY a ORDER BY NULL;

     Relying on implicit `GROUP BY' sorting in MySQL 5.5 is deprecated.
     To achieve a specific sort order of grouped results, it is
     preferable to use an explicit `ORDER BY' clause. `GROUP BY'
     sorting is a MySQL extension that may change in a future release;
     for example, to make it possible for the optimizer to order
     groupings in whatever manner it deems most efficient and to avoid
     the sorting overhead.

   * MySQL extends the `GROUP BY' clause so that you can also specify
     `ASC' and `DESC' after columns named in the clause:

          SELECT a, COUNT(b) FROM test_table GROUP BY a DESC;

   * MySQL extends the use of `GROUP BY' to permit selecting fields
     that are not mentioned in the `GROUP BY' clause. If you are not
     getting the results that you expect from your query, please read
     the description of `GROUP BY' found in *Note
     group-by-functions-and-modifiers::.

   * `GROUP BY' permits a `WITH ROLLUP' modifier. See *Note
     group-by-modifiers::.

   * The `HAVING' clause is applied nearly last, just before items are
     sent to the client, with no optimization. (`LIMIT' is applied after
     `HAVING'.)

     The SQL standard requires that `HAVING' must reference only
     columns in the `GROUP BY' clause or columns used in aggregate
     functions. However, MySQL supports an extension to this behavior,
     and permits `HAVING' to refer to columns in the *Note `SELECT':
     select. list and columns in outer subqueries as well.

     If the `HAVING' clause refers to a column that is ambiguous, a
     warning occurs. In the following statement, `col2' is ambiguous
     because it is used as both an alias and a column name:

          SELECT COUNT(col1) AS col2 FROM t GROUP BY col2 HAVING col2 = 2;

     Preference is given to standard SQL behavior, so if a `HAVING'
     column name is used both in `GROUP BY' and as an aliased column in
     the output column list, preference is given to the column in the
     `GROUP BY' column.

   * Do not use `HAVING' for items that should be in the `WHERE'
     clause. For example, do not write the following:

          SELECT COL_NAME FROM TBL_NAME HAVING COL_NAME > 0;

     Write this instead:

          SELECT COL_NAME FROM TBL_NAME WHERE COL_NAME > 0;

   * The `HAVING' clause can refer to aggregate functions, which the
     `WHERE' clause cannot:

          SELECT user, MAX(salary) FROM users
            GROUP BY user HAVING MAX(salary) > 10;

     (This did not work in some older versions of MySQL.)

   * MySQL permits duplicate column names. That is, there can be more
     than one SELECT_EXPR with the same name. This is an extension to
     standard SQL. Because MySQL also permits `GROUP BY' and `HAVING'
     to refer to SELECT_EXPR values, this can result in an ambiguity:

          SELECT 12 AS a, a FROM t GROUP BY a;

     In that statement, both columns have the name `a'. To ensure that
     the correct column is used for grouping, use different names for
     each SELECT_EXPR.

   * MySQL resolves unqualified column or alias references in `ORDER
     BY' clauses by searching in the SELECT_EXPR values, then in the
     columns of the tables in the `FROM' clause.  For `GROUP BY' or
     `HAVING' clauses, it searches the `FROM' clause before searching
     in the SELECT_EXPR values. (For `GROUP BY' and `HAVING', this
     differs from the pre-MySQL 5.0 behavior that used the same rules
     as for `ORDER BY'.)

   * The `LIMIT' clause can be used to constrain the number of rows
     returned by the *Note `SELECT': select. statement.  `LIMIT' takes
     one or two numeric arguments, which must both be nonnegative
     integer constants, with these exceptions:

        * Within prepared statements, `LIMIT' parameters can be
          specified using `?' placeholder markers.

        * Within stored programs, `LIMIT' parameters can be specified
          using integer-valued routine parameters or local variables as
          of MySQL 5.5.6.

     With two arguments, the first argument specifies the offset of the
     first row to return, and the second specifies the maximum number
     of rows to return. The offset of the initial row is 0 (not 1):

          SELECT * FROM tbl LIMIT 5,10;  # Retrieve rows 6-15

     To retrieve all rows from a certain offset up to the end of the
     result set, you can use some large number for the second
     parameter. This statement retrieves all rows from the 96th row to
     the last:

          SELECT * FROM tbl LIMIT 95,18446744073709551615;

     With one argument, the value specifies the number of rows to
     return from the beginning of the result set:

          SELECT * FROM tbl LIMIT 5;     # Retrieve first 5 rows

     In other words, `LIMIT ROW_COUNT' is equivalent to `LIMIT 0,
     ROW_COUNT'.

     For prepared statements, you can use placeholders. The following
     statements will return one row from the `tbl' table:

          SET @a=1;
          PREPARE STMT FROM 'SELECT * FROM tbl LIMIT ?';
          EXECUTE STMT USING @a;

     The following statements will return the second to sixth row from
     the `tbl' table:

          SET @skip=1; SET @numrows=5;
          PREPARE STMT FROM 'SELECT * FROM tbl LIMIT ?, ?';
          EXECUTE STMT USING @skip, @numrows;

     For compatibility with PostgreSQL, MySQL also supports the `LIMIT
     ROW_COUNT OFFSET OFFSET' syntax.

     If `LIMIT' occurs within a subquery and also is applied in the
     outer query, the outermost `LIMIT' takes precedence. For example,
     the following statement produces two rows, not one:

          (SELECT ... LIMIT 1) LIMIT 2;

   * A `PROCEDURE' clause names a procedure that should process the
     data in the result set. For an example, see *Note
     procedure-analyse::, which describes `ANALYSE', a procedure that
     can be used to obtain suggestions for optimal column data types
     that may help reduce table sizes.

   * The *Note `SELECT ... INTO': select-into. form of *Note `SELECT':
     select.  enables the query result to be written to a file or
     stored in variables. For more information, see *Note select-into::.

   * If you use `FOR UPDATE' with a storage engine that uses page or
     row locks, rows examined by the query are write-locked until the
     end of the current transaction. Using `LOCK IN SHARE MODE' sets a
     shared lock that permits other transactions to read the examined
     rows but not to update or delete them. See *Note
     innodb-locking-reads::.

Following the *Note `SELECT': select. keyword, you can use a number of
options that affect the operation of the statement. `HIGH_PRIORITY',
`STRAIGHT_JOIN', and options beginning with `SQL_' are MySQL extensions
to standard SQL.

   * The `ALL' and `DISTINCT' options specify whether duplicate rows
     should be returned.  `ALL' (the default) specifies that all
     matching rows should be returned, including duplicates.
     `DISTINCT' specifies removal of duplicate rows from the result
     set. It is an error to specify both options. `DISTINCTROW' is a
     synonym for `DISTINCT'.

   * `HIGH_PRIORITY' gives the *Note `SELECT': select. higher priority
     than a statement that updates a table. You should use this only for
     queries that are very fast and must be done at once. A `SELECT
     HIGH_PRIORITY' query that is issued while the table is locked for
     reading runs even if there is an update statement waiting for the
     table to be free. This affects only storage engines that use only
     table-level locking (such as `MyISAM', `MEMORY', and `MERGE').

     `HIGH_PRIORITY' cannot be used with *Note `SELECT': select.
     statements that are part of a *Note `UNION': union.

   * `STRAIGHT_JOIN' forces the optimizer to join the tables in the
     order in which they are listed in the `FROM' clause. You can use
     this to speed up a query if the optimizer joins the tables in
     nonoptimal order.  `STRAIGHT_JOIN' also can be used in the
     TABLE_REFERENCES list. See *Note join::.

     `STRAIGHT_JOIN' does not apply to any table that the optimizer
     treats as a `const' or `system' table. Such a table produces a
     single row, is read during the optimization phase of query
     execution, and references to its columns are replaced with the
     appropriate column values before query execution proceeds. These
     tables will appear first in the query plan displayed by *Note
     `EXPLAIN': explain. See *Note using-explain::. This exception may
     not apply to `const' or `system' tables that are used on the
     `NULL'-complemented side of an outer join (that is, the right-side
     table of a `LEFT JOIN' or the left-side table of a `RIGHT JOIN'.

   * `SQL_BIG_RESULT' or `SQL_SMALL_RESULT' can be used with `GROUP BY'
     or `DISTINCT' to tell the optimizer that the result set has many
     rows or is small, respectively. For `SQL_BIG_RESULT', MySQL
     directly uses disk-based temporary tables if needed, and prefers
     sorting to using a temporary table with a key on the `GROUP BY'
     elements. For `SQL_SMALL_RESULT', MySQL uses fast temporary tables
     to store the resulting table instead of using sorting.  This
     should not normally be needed.

   * `SQL_BUFFER_RESULT' forces the result to be put into a temporary
     table. This helps MySQL free the table locks early and helps in
     cases where it takes a long time to send the result set to the
     client. This option can be used only for top-level *Note `SELECT':
     select.  statements, not for subqueries or following *Note
     `UNION': union.

   * `SQL_CALC_FOUND_ROWS' tells MySQL to calculate how many rows there
     would be in the result set, disregarding any `LIMIT' clause. The
     number of rows can then be retrieved with `SELECT FOUND_ROWS()'.
     See *Note information-functions::.

   * The `SQL_CACHE' and `SQL_NO_CACHE' options affect caching of query
     results in the query cache (see *Note query-cache::). `SQL_CACHE'
     tells MySQL to store the result in the query cache if it is
     cacheable and the value of the `query_cache_type' system variable
     is `2' or `DEMAND'.  With `SQL_NO_CACHE', the server does not use
     the query cache. It neither checks the query cache to see whether
     the result is already cached, nor does it cache the query result.
     (Due to a limitation in the parser, a space character must precede
     and follow the `SQL_NO_CACHE' keyword; a nonspace such as a
     newline causes the server to check the query cache to see whether
     the result is already cached.)

     For views, `SQL_NO_CACHE' applies if it appears in any *Note
     `SELECT': select. in the query. For a cacheable query, `SQL_CACHE'
     applies if it appears in the first *Note `SELECT': select. of a
     view referred to by the query.

     As of MySQL 5.5.3, these two options are mutually exclusive and an
     error occurs if they are both specified. Also, these options are
     not permitted in subqueries (including subqueries in the `FROM'
     clause), and *Note `SELECT': select. statements in unions other
     than the first *Note `SELECT': select.

     Before MySQL 5.5.3, for a query that uses *Note `UNION': union. or
     subqueries, the following rules apply:

        * `SQL_NO_CACHE' applies if it appears in any *Note `SELECT':
          select. in the query.

        * For a cacheable query, `SQL_CACHE' applies if it appears in
          the first *Note `SELECT': select. of the query.

A `SELECT' from a partitioned table using a storage engine such as
*Note `MyISAM': myisam-storage-engine. that employs table-level locks
locks all partitions of the table. This does not occur with tables
using storage engines such as *Note `InnoDB': innodb-storage-engine.
that employ row-level locking.  This issue is resolved in MySQL 5.6. See
*Note partitioning-limitations-locking::, for more information.


File: manual.info,  Node: select-into,  Next: join,  Prev: select,  Up: select

13.2.9.1 `SELECT ... INTO' Syntax
.................................

The *Note `SELECT ... INTO': select-into. form of *Note `SELECT':
select.  enables a query result to be stored in variables or written to
a file:

   * `SELECT ... INTO VAR_LIST' selects column values and stores them
     into variables.

   * `SELECT ... INTO OUTFILE' writes the selected rows to a file.
     Column and line terminators can be specified to produce a specific
     output format.

   * `SELECT ... INTO DUMPFILE' writes a single row to a file without
     any formatting.

The *Note `SELECT': select. syntax description (see *Note select::)
shows the `INTO' clause near the end of the statement. It is also
possible to use `INTO' immediately following the SELECT_EXPR list.

An `INTO' clause should not be used in a nested *Note `SELECT': select.
because such a *Note `SELECT': select. must return its result to the
outer context.

The `INTO' clause can name a list of one or more variables, which can
be user-defined variables, stored procedure or function parameters, or
stored program local variables. (Within a prepared `SELECT ... INTO
OUTFILE' statement, only user-defined variables are permitted;see *Note
local-variable-scope::.)

The selected values are assigned to the variables. The number of
variables must match the number of columns. The query should return a
single row. If the query returns no rows, a warning with error code
1329 occurs (`No data'), and the variable values remain unchanged. If
the query returns multiple rows, error 1172 occurs (`Result consisted of
more than one row'). If it is possible that the statement may retrieve
multiple rows, you can use `LIMIT 1' to limit the result set to a
single row.

     SELECT id, data INTO @x, @y FROM test.t1 LIMIT 1;

User variable names are not case sensitive. See *Note user-variables::.

The *Note `SELECT ... INTO OUTFILE 'FILE_NAME'': select-into. form of
*Note `SELECT': select. writes the selected rows to a file. The file is
created on the server host, so you must have the `FILE' privilege to use
this syntax. FILE_NAME cannot be an existing file, which among other
things prevents files such as `/etc/passwd' and database tables from
being destroyed. The `character_set_filesystem' system variable
controls the interpretation of the file name.

The *Note `SELECT ... INTO OUTFILE': select-into. statement is intended
primarily to let you very quickly dump a table to a text file on the
server machine.  If you want to create the resulting file on some other
host than the server host, you normally cannot use *Note `SELECT ...
INTO OUTFILE': select-into. since there is no way to write a path to the
file relative to the server host's file system.

However, if the MySQL client software is installed on the remote
machine, you can instead use a client command such as `mysql -e "SELECT
..." > FILE_NAME' to generate the file on the client host.

It is also possible to create the resulting file on a different host
other than the server host, if the location of the file on the remote
host can be accessed using a network-mapped path on the server's file
system. In this case, the presence of *Note `mysql': mysql. (or some
other MySQL client program) is not required on the target host.

*Note `SELECT ... INTO OUTFILE': select-into. is the complement of
*Note `LOAD DATA INFILE': load-data. Column values are written
converted to the character set specified in the `CHARACTER SET' clause.
If no such clause is present, values are dumped using the `binary'
character set. In effect, there is no character set conversion. If a
result set contains columns in several character sets, the output data
file will as well and you may not be able to reload the file correctly.

The syntax for the EXPORT_OPTIONS part of the statement consists of the
same `FIELDS' and `LINES' clauses that are used with the *Note `LOAD
DATA INFILE': load-data. statement. See *Note load-data::, for
information about the `FIELDS' and `LINES' clauses, including their
default values and permissible values.

`FIELDS ESCAPED BY' controls how to write special characters. If the
`FIELDS ESCAPED BY' character is not empty, it is used when necessary
to avoid ambiguity as a prefix that precedes following characters on
output:

   * The `FIELDS ESCAPED BY' character

   * The `FIELDS [OPTIONALLY] ENCLOSED BY' character

   * The first character of the `FIELDS TERMINATED BY' and `LINES
     TERMINATED BY' values

   * ASCII `NUL' (the zero-valued byte; what is actually written
     following the escape character is ASCII ``0'', not a zero-valued
     byte)

The `FIELDS TERMINATED BY', `ENCLOSED BY', `ESCAPED BY', or `LINES
TERMINATED BY' characters _must_ be escaped so that you can read the
file back in reliably. ASCII `NUL' is escaped to make it easier to view
with some pagers.

The resulting file does not have to conform to SQL syntax, so nothing
else need be escaped.

If the `FIELDS ESCAPED BY' character is empty, no characters are
escaped and `NULL' is output as `NULL', not `\N'. It is probably not a
good idea to specify an empty escape character, particularly if field
values in your data contain any of the characters in the list just
given.

Here is an example that produces a file in the comma-separated values
(CSV) format used by many programs:

     SELECT a,b,a+b INTO OUTFILE '/tmp/result.txt'
       FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
       LINES TERMINATED BY '\n'
       FROM test_table;

If you use `INTO DUMPFILE' instead of `INTO OUTFILE', MySQL writes only
one row into the file, without any column or line termination and
without performing any escape processing. This is useful if you want to
store a *Note `BLOB': blob. value in a file.

*Note*:

Any file created by `INTO OUTFILE' or `INTO DUMPFILE' is writable by
all users on the server host. The reason for this is that the MySQL
server cannot create a file that is owned by anyone other than the user
under whose account it is running. (You should _never_ run *Note
`mysqld': mysqld. as `root' for this and other reasons.) The file thus
must be world-writable so that you can manipulate its contents.

If the `secure_file_priv' system variable is set to a nonempty
directory name, the file to be written must be located in that
directory.

In the context of *Note `SELECT ... INTO': select-into. statements that
occur as part of events executed by the Event Scheduler, diagnostics
messages (not only errors, but also warnings) are written to the error
log, and, on Windows, to the application event log. For additional
information, see *Note events-status-info::.


File: manual.info,  Node: join,  Next: index-hints,  Prev: select-into,  Up: select

13.2.9.2 `JOIN' Syntax
......................

MySQL supports the following `JOIN' syntaxes for the TABLE_REFERENCES
part of *Note `SELECT': select. statements and multiple-table *Note
`DELETE': delete. and *Note `UPDATE': update. statements:

     TABLE_REFERENCES:
         ESCAPED_TABLE_REFERENCE [, ESCAPED_TABLE_REFERENCE] ...

     ESCAPED_TABLE_REFERENCE:
         TABLE_REFERENCE
       | { OJ TABLE_REFERENCE }

     TABLE_REFERENCE:
         TABLE_FACTOR
       | JOIN_TABLE

     TABLE_FACTOR:
         TBL_NAME [[AS] ALIAS] [INDEX_HINT_LIST]
       | TABLE_SUBQUERY [AS] ALIAS
       | ( TABLE_REFERENCES )

     JOIN_TABLE:
         TABLE_REFERENCE [INNER | CROSS] JOIN TABLE_FACTOR [JOIN_CONDITION]
       | TABLE_REFERENCE STRAIGHT_JOIN TABLE_FACTOR
       | TABLE_REFERENCE STRAIGHT_JOIN TABLE_FACTOR ON CONDITIONAL_EXPR
       | TABLE_REFERENCE {LEFT|RIGHT} [OUTER] JOIN TABLE_REFERENCE JOIN_CONDITION
       | TABLE_REFERENCE NATURAL [{LEFT|RIGHT} [OUTER]] JOIN TABLE_FACTOR

     JOIN_CONDITION:
         ON CONDITIONAL_EXPR
       | USING (COLUMN_LIST)

     INDEX_HINT_LIST:
         INDEX_HINT [, INDEX_HINT] ...

     INDEX_HINT:
         USE {INDEX|KEY}
           [FOR {JOIN|ORDER BY|GROUP BY}] ([INDEX_LIST])
       | IGNORE {INDEX|KEY}
           [FOR {JOIN|ORDER BY|GROUP BY}] (INDEX_LIST)
       | FORCE {INDEX|KEY}
           [FOR {JOIN|ORDER BY|GROUP BY}] (INDEX_LIST)

     INDEX_LIST:
         INDEX_NAME [, INDEX_NAME] ...

A table reference is also known as a join expression.

The syntax of TABLE_FACTOR is extended in comparison with the SQL
Standard. The latter accepts only TABLE_REFERENCE, not a list of them
inside a pair of parentheses.

This is a conservative extension if we consider each comma in a list of
TABLE_REFERENCE items as equivalent to an inner join. For example:

     SELECT * FROM t1 LEFT JOIN (t2, t3, t4)
                      ON (t2.a=t1.a AND t3.b=t1.b AND t4.c=t1.c)

is equivalent to:

     SELECT * FROM t1 LEFT JOIN (t2 CROSS JOIN t3 CROSS JOIN t4)
                      ON (t2.a=t1.a AND t3.b=t1.b AND t4.c=t1.c)

In MySQL, `JOIN', `CROSS JOIN', and `INNER JOIN' are syntactic
equivalents (they can replace each other). In standard SQL, they are
not equivalent. `INNER JOIN' is used with an `ON' clause, `CROSS JOIN'
is used otherwise.

In general, parentheses can be ignored in join expressions containing
only inner join operations. MySQL also supports nested joins (see *Note
nested-join-optimization::).

Index hints can be specified to affect how the MySQL optimizer makes
use of indexes. For more information, see *Note index-hints::.

The following list describes general factors to take into account when
writing joins.

   * A table reference can be aliased using `TBL_NAME AS ALIAS_NAME' or
     TBL_NAME ALIAS_NAME:

          SELECT t1.name, t2.salary
            FROM employee AS t1 INNER JOIN info AS t2 ON t1.name = t2.name;

          SELECT t1.name, t2.salary
            FROM employee t1 INNER JOIN info t2 ON t1.name = t2.name;

   * A TABLE_SUBQUERY is also known as a subquery in the `FROM' clause.
     Such subqueries _must_ include an alias to give the subquery
     result a table name. A trivial example follows; see also *Note
     from-clause-subqueries::.

          SELECT * FROM (SELECT 1, 2, 3) AS t1;

   * `INNER JOIN' and `,' (comma) are semantically equivalent in the
     absence of a join condition: both produce a Cartesian product
     between the specified tables (that is, each and every row in the
     first table is joined to each and every row in the second table).

     However, the precedence of the comma operator is less than of
     `INNER JOIN', `CROSS JOIN', `LEFT JOIN', and so on. If you mix
     comma joins with the other join types when there is a join
     condition, an error of the form `Unknown column 'COL_NAME' in 'on
     clause'' may occur. Information about dealing with this problem is
     given later in this section.

   * The CONDITIONAL_EXPR used with `ON' is any conditional expression
     of the form that can be used in a `WHERE' clause.  Generally, you
     should use the `ON' clause for conditions that specify how to join
     tables, and the `WHERE' clause to restrict which rows you want in
     the result set.

   * If there is no matching row for the right table in the `ON' or
     `USING' part in a `LEFT JOIN', a row with all columns set to
     `NULL' is used for the right table. You can use this fact to find
     rows in a table that have no counterpart in another table:

          SELECT left_tbl.*
            FROM left_tbl LEFT JOIN right_tbl ON left_tbl.id = right_tbl.id
            WHERE right_tbl.id IS NULL;

     This example finds all rows in `left_tbl' with an `id' value that
     is not present in `right_tbl' (that is, all rows in `left_tbl'
     with no corresponding row in `right_tbl'). This assumes that
     `right_tbl.id' is declared `NOT NULL'. See *Note
     left-join-optimization::.

   * The `USING(COLUMN_LIST)' clause names a list of columns that must
     exist in both tables. If tables `a' and `b' both contain columns
     `c1', `c2', and `c3', the following join compares corresponding
     columns from the two tables:

          a LEFT JOIN b USING (c1,c2,c3)

   * The `NATURAL [LEFT] JOIN' of two tables is defined to be
     semantically equivalent to an `INNER JOIN' or a `LEFT JOIN' with a
     `USING' clause that names all columns that exist in both tables.

   * `RIGHT JOIN' works analogously to `LEFT JOIN'. To keep code
     portable across databases, it is recommended that you use `LEFT
     JOIN' instead of `RIGHT JOIN'.

   * The `{ OJ ... }' syntax shown in the join syntax description
     exists only for compatibility with ODBC.  The curly braces in the
     syntax should be written literally; they are not metasyntax as
     used elsewhere in syntax descriptions.

          SELECT left_tbl.*
              FROM { OJ left_tbl LEFT OUTER JOIN right_tbl ON left_tbl.id = right_tbl.id }
              WHERE right_tbl.id IS NULL;

     You can use other types of joins within `{ OJ ...  }', such as
     `INNER JOIN' or `RIGHT OUTER JOIN'. This helps with compatibility
     with some third-party applications, but is not official ODBC
     syntax.

     The parser does not permit nested `{ OJ ...  }' constructs (which
     are not legal ODBC syntax, anyway). Queries that use such
     constructs should be rewritten. For an example, see `JOIN' Syntax
     (http://dev.mysql.com/doc/refman/5.1/en/join.html).

   * `STRAIGHT_JOIN' is similar to `JOIN', except that the left table is
     always read before the right table. This can be used for those
     (few) cases for which the join optimizer puts the tables in the
     wrong order.

Some join examples:

     SELECT * FROM table1, table2;

     SELECT * FROM table1 INNER JOIN table2 ON table1.id=table2.id;

     SELECT * FROM table1 LEFT JOIN table2 ON table1.id=table2.id;

     SELECT * FROM table1 LEFT JOIN table2 USING (id);

     SELECT * FROM table1 LEFT JOIN table2 ON table1.id=table2.id
       LEFT JOIN table3 ON table2.id=table3.id;

*Join Processing Changes in MySQL 5.0.12*

*Note*:

Natural joins and joins with `USING', including outer join variants,
are processed according to the SQL:2003 standard. The goal was to align
the syntax and semantics of MySQL with respect to `NATURAL JOIN' and
`JOIN ... USING' according to SQL:2003. However, these changes in join
processing can result in different output columns for some joins. Also,
some queries that appeared to work correctly in older versions (prior
to 5.0.12) must be rewritten to comply with the standard.

These changes have five main aspects:

   * The way that MySQL determines the result columns of `NATURAL' or
     `USING' join operations (and thus the result of the entire `FROM'
     clause).

   * Expansion of `SELECT *' and `SELECT TBL_NAME.*' into a list of
     selected columns.

   * Resolution of column names in `NATURAL' or `USING' joins.

   * Transformation of `NATURAL' or `USING' joins into `JOIN ...  ON'.

   * Resolution of column names in the `ON' condition of a `JOIN ...
     ON'.

The following list provides more detail about several effects of
current join processing versus join processing in older versions. The
term `previously' means `prior to MySQL 5.0.12.'

   * The columns of a `NATURAL' join or a `USING' join may be different
     from previously. Specifically, redundant output columns no longer
     appear, and the order of columns for `SELECT *' expansion may be
     different from before.

     Consider this set of statements:

          CREATE TABLE t1 (i INT, j INT);
          CREATE TABLE t2 (k INT, j INT);
          INSERT INTO t1 VALUES(1,1);
          INSERT INTO t2 VALUES(1,1);
          SELECT * FROM t1 NATURAL JOIN t2;
          SELECT * FROM t1 JOIN t2 USING (j);

     Previously, the statements produced this output:

          +------+------+------+------+
          | i    | j    | k    | j    |
          +------+------+------+------+
          |    1 |    1 |    1 |    1 |
          +------+------+------+------+
          +------+------+------+------+
          | i    | j    | k    | j    |
          +------+------+------+------+
          |    1 |    1 |    1 |    1 |
          +------+------+------+------+

     In the first *Note `SELECT': select.  statement, column `j'
     appears in both tables and thus becomes a join column, so,
     according to standard SQL, it should appear only once in the
     output, not twice. Similarly, in the second SELECT statement,
     column `j' is named in the `USING' clause and should appear only
     once in the output, not twice. But in both cases, the redundant
     column is not eliminated. Also, the order of the columns is not
     correct according to standard SQL.

     Now the statements produce this output:

          +------+------+------+
          | j    | i    | k    |
          +------+------+------+
          |    1 |    1 |    1 |
          +------+------+------+
          +------+------+------+
          | j    | i    | k    |
          +------+------+------+
          |    1 |    1 |    1 |
          +------+------+------+

     The redundant column is eliminated and the column order is correct
     according to standard SQL:

        * First, coalesced common columns of the two joined tables, in
          the order in which they occur in the first table

        * Second, columns unique to the first table, in order in which
          they occur in that table

        * Third, columns unique to the second table, in order in which
          they occur in that table

     The single result column that replaces two common columns is
     defined using the coalesce operation. That is, for two `t1.a' and
     `t2.a' the resulting single join column `a' is defined as `a =
     COALESCE(t1.a, t2.a)', where:

          COALESCE(x, y) = (CASE WHEN V1 IS NOT NULL THEN V1 ELSE V2 END)

     If the join operation is any other join, the result columns of the
     join consists of the concatenation of all columns of the joined
     tables. This is the same as previously.

     A consequence of the definition of coalesced columns is that, for
     outer joins, the coalesced column contains the value of the
     non-`NULL' column if one of the two columns is always `NULL'. If
     neither or both columns are `NULL', both common columns have the
     same value, so it doesn't matter which one is chosen as the value
     of the coalesced column. A simple way to interpret this is to
     consider that a coalesced column of an outer join is represented
     by the common column of the inner table of a `JOIN'. Suppose that
     the tables `t1(a,b)' and `t2(a,c)' have the following contents:

          t1    t2
          ----  ----
          1 x   2 z
          2 y   3 w

     Then:

          mysql> SELECT * FROM t1 NATURAL LEFT JOIN t2;
          +------+------+------+
          | a    | b    | c    |
          +------+------+------+
          |    1 | x    | NULL |
          |    2 | y    | z    |
          +------+------+------+

     Here column `a' contains the values of `t1.a'.

          mysql> SELECT * FROM t1 NATURAL RIGHT JOIN t2;
          +------+------+------+
          | a    | c    | b    |
          +------+------+------+
          |    2 | z    | y    |
          |    3 | w    | NULL |
          +------+------+------+

     Here column `a' contains the values of `t2.a'.

     Compare these results to the otherwise equivalent queries with
     `JOIN ... ON':

          mysql> SELECT * FROM t1 LEFT JOIN t2 ON (t1.a = t2.a);
          +------+------+------+------+
          | a    | b    | a    | c    |
          +------+------+------+------+
          |    1 | x    | NULL | NULL |
          |    2 | y    |    2 | z    |
          +------+------+------+------+

          mysql> SELECT * FROM t1 RIGHT JOIN t2 ON (t1.a = t2.a);
          +------+------+------+------+
          | a    | b    | a    | c    |
          +------+------+------+------+
          |    2 | y    |    2 | z    |
          | NULL | NULL |    3 | w    |
          +------+------+------+------+

   * Previously, a `USING' clause could be rewritten as an `ON' clause
     that compares corresponding columns. For example, the following two
     clauses were semantically identical:

          a LEFT JOIN b USING (c1,c2,c3)
          a LEFT JOIN b ON a.c1=b.c1 AND a.c2=b.c2 AND a.c3=b.c3

     Now the two clauses no longer are quite the same:

        * With respect to determining which rows satisfy the join
          condition, both joins remain semantically identical.

        * With respect to determining which columns to display for
          `SELECT *' expansion, the two joins are not semantically
          identical. The `USING' join selects the coalesced value of
          corresponding columns, whereas the `ON' join selects all
          columns from all tables. For the preceding `USING' join,
          `SELECT *' selects these values:

               COALESCE(a.c1,b.c1), COALESCE(a.c2,b.c2), COALESCE(a.c3,b.c3)

          For the `ON' join, `SELECT *' selects these values:

               a.c1, a.c2, a.c3, b.c1, b.c2, b.c3

          With an inner join, `COALESCE(a.c1,b.c1)' is the same as
          either `a.c1' or `b.c1' because both columns will have the
          same value. With an outer join (such as `LEFT JOIN'), one of
          the two columns can be `NULL'. That column will be omitted
          from the result.

   * The evaluation of multi-way natural joins differs in a very
     important way that affects the result of `NATURAL' or `USING' joins
     and that can require query rewriting. Suppose that you have three
     tables `t1(a,b)', `t2(c,b)', and `t3(a,c)' that each have one row:
     `t1(1,2)', `t2(10,2)', and `t3(7,10)'. Suppose also that you have
     this `NATURAL JOIN' on the three tables:

          SELECT ... FROM t1 NATURAL JOIN t2 NATURAL JOIN t3;

     Previously, the left operand of the second join was considered to
     be `t2', whereas it should be the nested join `(t1 NATURAL JOIN
     t2)'. As a result, the columns of `t3' are checked for common
     columns only in `t2', and, if `t3' has common columns with `t1',
     these columns are not used as equi-join columns. Thus, previously,
     the preceding query was transformed to the following equi-join:

          SELECT ... FROM t1, t2, t3
            WHERE t1.b = t2.b AND t2.c = t3.c;

     That join is missing one more equi-join predicate `(t1.a = t3.a)'.
     As a result, it produces one row, not the empty result that it
     should. The correct equivalent query is this:

          SELECT ... FROM t1, t2, t3
            WHERE t1.b = t2.b AND t2.c = t3.c AND t1.a = t3.a;

     If you require the same query result in current versions of MySQL
     as in older versions, rewrite the natural join as the first
     equi-join.

   * Previously, the comma operator (`,') and `JOIN' both had the same
     precedence, so the join expression `t1, t2 JOIN t3' was
     interpreted as `((t1, t2) JOIN t3)'. Now `JOIN' has higher
     precedence, so the expression is interpreted as `(t1, (t2 JOIN
     t3))'. This change affects statements that use an `ON' clause,
     because that clause can refer only to columns in the operands of
     the join, and the change in precedence changes interpretation of
     what those operands are.

     Example:

          CREATE TABLE t1 (i1 INT, j1 INT);
          CREATE TABLE t2 (i2 INT, j2 INT);
          CREATE TABLE t3 (i3 INT, j3 INT);
          INSERT INTO t1 VALUES(1,1);
          INSERT INTO t2 VALUES(1,1);
          INSERT INTO t3 VALUES(1,1);
          SELECT * FROM t1, t2 JOIN t3 ON (t1.i1 = t3.i3);

     Previously, the *Note `SELECT': select. was legal due to the
     implicit grouping of `t1,t2' as `(t1,t2)'. Now the `JOIN' takes
     precedence, so the operands for the `ON' clause are `t2' and `t3'.
     Because `t1.i1' is not a column in either of the operands, the
     result is an `Unknown column 't1.i1' in 'on clause'' error. To
     allow the join to be processed, group the first two tables
     explicitly with parentheses so that the operands for the `ON'
     clause are `(t1,t2)' and `t3':

          SELECT * FROM (t1, t2) JOIN t3 ON (t1.i1 = t3.i3);

     Alternatively, avoid the use of the comma operator and use `JOIN'
     instead:

          SELECT * FROM t1 JOIN t2 JOIN t3 ON (t1.i1 = t3.i3);

     This change also applies to statements that mix the comma operator
     with `INNER JOIN', `CROSS JOIN', `LEFT JOIN', and `RIGHT JOIN',
     all of which now have higher precedence than the comma operator.

   * Previously, the `ON' clause could refer to columns in tables named
     to its right. Now an `ON' clause can refer only to its operands.

     Example:

          CREATE TABLE t1 (i1 INT);
          CREATE TABLE t2 (i2 INT);
          CREATE TABLE t3 (i3 INT);
          SELECT * FROM t1 JOIN t2 ON (i1 = i3) JOIN t3;

     Previously, the *Note `SELECT': select.  statement was legal. Now
     the statement fails with an `Unknown column 'i3' in 'on clause''
     error because `i3' is a column in `t3', which is not an operand of
     the `ON' clause. The statement should be rewritten as follows:

          SELECT * FROM t1 JOIN t2 JOIN t3 ON (i1 = i3);

   * Resolution of column names in `NATURAL' or `USING' joins is
     different than previously.  For column names that are outside the
     `FROM' clause, MySQL now handles a superset of the queries
     compared to previously. That is, in cases when MySQL formerly
     issued an error that some column is ambiguous, the query now is
     handled correctly. This is due to the fact that MySQL now treats
     the common columns of `NATURAL' or `USING' joins as a single
     column, so when a query refers to such columns, the query compiler
     does not consider them as ambiguous.

     Example:

          SELECT * FROM t1 NATURAL JOIN t2 WHERE b > 1;

     Previously, this query would produce an error `ERROR 1052 (23000):
     Column 'b' in where clause is ambiguous'. Now the query produces
     the correct result:

          +------+------+------+
          | b    | c    | y    |
          +------+------+------+
          |    4 |    2 |    3 |
          +------+------+------+

     One extension of MySQL compared to the SQL:2003 standard is that
     MySQL enables you to qualify the common (coalesced) columns of
     `NATURAL' or `USING' joins (just as previously), while the
     standard disallows that.


File: manual.info,  Node: index-hints,  Next: union,  Prev: join,  Up: select

13.2.9.3 Index Hint Syntax
..........................

You can provide hints to give the optimizer information about how to
choose indexes during query processing.  *Note join::, describes the
general syntax for specifying tables in a *Note `SELECT': select.
statement. The syntax for an individual table, including that for index
hints, looks like this:

     TBL_NAME [[AS] ALIAS] [INDEX_HINT_LIST]

     INDEX_HINT_LIST:
         INDEX_HINT [, INDEX_HINT] ...

     INDEX_HINT:
         USE {INDEX|KEY}
           [FOR {JOIN|ORDER BY|GROUP BY}] ([INDEX_LIST])
       | IGNORE {INDEX|KEY}
           [FOR {JOIN|ORDER BY|GROUP BY}] (INDEX_LIST)
       | FORCE {INDEX|KEY}
           [FOR {JOIN|ORDER BY|GROUP BY}] (INDEX_LIST)

     INDEX_LIST:
         INDEX_NAME [, INDEX_NAME] ...

By specifying `USE INDEX (INDEX_LIST)', you can tell MySQL to use only
one of the named indexes to find rows in the table. The alternative
syntax `IGNORE INDEX (INDEX_LIST)' can be used to tell MySQL to not use
some particular index or indexes. These hints are useful if *Note
`EXPLAIN': explain. shows that MySQL is using the wrong index from the
list of possible indexes.

You can also use `FORCE INDEX', which acts like `USE INDEX
(INDEX_LIST)' but with the addition that a table scan is assumed to be
_very_ expensive. In other words, a table scan is used only if there is
no way to use one of the given indexes to find rows in the table.

Each hint requires the names of _indexes_, not the names of columns.
The name of a `PRIMARY KEY' is `PRIMARY'. To see the index names for a
table, use *Note `SHOW INDEX': show-index.

An INDEX_NAME value need not be a full index name. It can be an
unambiguous prefix of an index name. If a prefix is ambiguous, an error
occurs.

Examples:

     SELECT * FROM table1 USE INDEX (col1_index,col2_index)
       WHERE col1=1 AND col2=2 AND col3=3;

     SELECT * FROM table1 IGNORE INDEX (col3_index)
       WHERE col1=1 AND col2=2 AND col3=3;

The syntax for index hints has the following characteristics:

   * It is syntactically valid to specify an empty INDEX_LIST for `USE
     INDEX', which means `use no indexes.' Specifying an empty
     INDEX_LIST for `FORCE INDEX' or `IGNORE INDEX' is a syntax error.

   * You can specify the scope of a index hint by adding a `FOR' clause
     to the hint. This provides more fine-grained control over the
     optimizer's selection of an execution plan for various phases of
     query processing. To affect only the indexes used when MySQL
     decides how to find rows in the table and how to process joins,
     use `FOR JOIN'. To influence index usage for sorting or grouping
     rows, use `FOR ORDER BY' or `FOR GROUP BY'. (However, if there is a
     covering index for the table and it is used to access the table,
     the optimizer will ignore `IGNORE INDEX FOR {ORDER BY|GROUP BY}'
     hints that disable that index.)

   * You can specify multiple index hints:

          SELECT * FROM t1 USE INDEX (i1) IGNORE INDEX FOR ORDER BY (i2) ORDER BY a;

     It is not a error to name the same index in several hints (even
     within the same hint):

          SELECT * FROM t1 USE INDEX (i1) USE INDEX (i1,i1);

     However, it is an error to mix `USE INDEX' and `FORCE INDEX' for
     the same table:

          SELECT * FROM t1 USE INDEX FOR JOIN (i1) FORCE INDEX FOR JOIN (i2);

if you specify no `FOR' clause for an index hint, the hint by default
applies to all parts of the statement.  For example, this hint:

     IGNORE INDEX (i1)

is equivalent to this combination of hints:

     IGNORE INDEX FOR JOIN (i1)
     IGNORE INDEX FOR ORDER BY (i1)
     IGNORE INDEX FOR GROUP BY (i1)

To cause the server to use the older behavior for hint scope when no
`FOR' clause is present (so that hints apply only to row retrieval),
enable the `old' system variable at server startup. Take care about
enabling this variable in a replication setup. With statement-based
binary logging, having different modes for the master and slaves might
lead to replication errors.

When index hints are processed, they are collected in a single list by
type (*Note `USE': use, `FORCE', `IGNORE') and by scope (`FOR JOIN',
`FOR ORDER BY', `FOR GROUP BY'). For example:

     SELECT * FROM t1
       USE INDEX () IGNORE INDEX (i2) USE INDEX (i1) USE INDEX (i2);

is equivalent to:

     SELECT * FROM t1
        USE INDEX (i1,i2) IGNORE INDEX (i2);

The index hints then are applied for each scope in the following order:

  1. `{USE|FORCE} INDEX' is applied if present.  (If not, the
     optimizer-determined set of indexes is used.)

  2. `IGNORE INDEX' is applied over the result of the previous step.
     For example, the following two queries are equivalent:

          SELECT * FROM t1 USE INDEX (i1) IGNORE INDEX (i2) USE INDEX (i2);

          SELECT * FROM t1 USE INDEX (i1);

For `FULLTEXT' searches, index hints work as follows:

   * For natural language mode searches, index hints are silently
     ignored. For example, `IGNORE INDEX(i)' is ignored with no warning
     and the index is still used.

     For boolean mode searches, index hints with `FOR ORDER BY' or `FOR
     GROUP BY' are silently ignored. Index hints with `FOR JOIN' or no
     `FOR' modifier are honored. In contrast to how hints apply for
     non-`FULLTEXT' searches, the hint is used for all phases of query
     execution (finding rows and retrieval, grouping, and ordering).
     This is true even if the hint is given for a non-`FULLTEXT' index.

For example, the following two queries are equivalent:

     SELECT * FROM t
       USE INDEX (index1)
       IGNORE INDEX (index1) FOR ORDER BY
       IGNORE INDEX (index1) FOR GROUP BY
       WHERE ... IN BOOLEAN MODE ... ;

     SELECT * FROM t
       USE INDEX (index1)
       WHERE ... IN BOOLEAN MODE ... ;


File: manual.info,  Node: union,  Prev: index-hints,  Up: select

13.2.9.4 `UNION' Syntax
.......................

     SELECT ...
     UNION [ALL | DISTINCT] SELECT ...
     [UNION [ALL | DISTINCT] SELECT ...]

*Note `UNION': union. is used to combine the result from multiple *Note
`SELECT': select.  statements into a single result set.

The column names from the first *Note `SELECT': select. statement are
used as the column names for the results returned. Selected columns
listed in corresponding positions of each *Note `SELECT': select.
statement should have the same data type. (For example, the first
column selected by the first statement should have the same type as the
first column selected by the other statements.)

If the data types of corresponding *Note `SELECT': select. columns do
not match, the types and lengths of the columns in the *Note `UNION':
union. result take into account the values retrieved by all of the
*Note `SELECT': select. statements. For example, consider the following:

     mysql> SELECT REPEAT('a',1) UNION SELECT REPEAT('b',10);
     +---------------+
     | REPEAT('a',1) |
     +---------------+
     | a             |
     | bbbbbbbbbb    |
     +---------------+

The *Note `SELECT': select. statements are normal select statements,
but with the following restrictions:

   * Only the last *Note `SELECT': select.  statement can use `INTO
     OUTFILE'. (However, the entire *Note `UNION': union. result is
     written to the file.)

   * `HIGH_PRIORITY' cannot be used with *Note `SELECT': select.
     statements that are part of a *Note `UNION': union. If you specify
     it for the first *Note `SELECT': select, it has no effect. If you
     specify it for any subsequent *Note `SELECT': select. statements,
     a syntax error results.

The default behavior for *Note `UNION': union. is that duplicate rows
are removed from the result. The optional `DISTINCT' keyword has no
effect other than the default because it also specifies duplicate-row
removal. With the optional `ALL' keyword, duplicate-row removal does
not occur and the result includes all matching rows from all the *Note
`SELECT': select. statements.

You can mix *Note `UNION ALL': union. and *Note `UNION DISTINCT':
union. in the same query. Mixed *Note `UNION': union. types are treated
such that a `DISTINCT' union overrides any `ALL' union to its left. A
`DISTINCT' union can be produced explicitly by using *Note `UNION
DISTINCT': union. or implicitly by using *Note `UNION': union. with no
following `DISTINCT' or `ALL' keyword.

To apply `ORDER BY' or `LIMIT' to an individual *Note `SELECT': select,
place the clause inside the parentheses that enclose the *Note
`SELECT': select.:

     (SELECT a FROM t1 WHERE a=10 AND B=1 ORDER BY a LIMIT 10)
     UNION
     (SELECT a FROM t2 WHERE a=11 AND B=2 ORDER BY a LIMIT 10);

However, use of `ORDER BY' for individual *Note `SELECT': select.
statements implies nothing about the order in which the rows appear in
the final result because *Note `UNION': union. by default produces an
unordered set of rows. Therefore, the use of `ORDER BY' in this context
is typically in conjunction with `LIMIT', so that it is used to
determine the subset of the selected rows to retrieve for the *Note
`SELECT': select, even though it does not necessarily affect the order
of those rows in the final *Note `UNION': union. result. If `ORDER BY'
appears without `LIMIT' in a *Note `SELECT': select, it is optimized
away because it will have no effect anyway.

To use an `ORDER BY' or `LIMIT' clause to sort or limit the entire
*Note `UNION': union. result, parenthesize the individual *Note
`SELECT': select. statements and place the `ORDER BY' or `LIMIT' after
the last one. The following example uses both clauses:

     (SELECT a FROM t1 WHERE a=10 AND B=1)
     UNION
     (SELECT a FROM t2 WHERE a=11 AND B=2)
     ORDER BY a LIMIT 10;

A statement without parentheses is equivalent to one parenthesized as
just shown.

This kind of `ORDER BY' cannot use column references that include a
table name (that is, names in TBL_NAME.COL_NAME format). Instead,
provide a column alias in the first *Note `SELECT': select. statement
and refer to the alias in the `ORDER BY'. (Alternatively, refer to the
column in the `ORDER BY' using its column position. However, use of
column positions is deprecated.)

Also, if a column to be sorted is aliased, the `ORDER BY' clause _must_
refer to the alias, not the column name. The first of the following
statements will work, but the second will fail with an `Unknown column
'a' in 'order clause'' error:

     (SELECT a AS b FROM t) UNION (SELECT ...) ORDER BY b;
     (SELECT a AS b FROM t) UNION (SELECT ...) ORDER BY a;

To cause rows in a *Note `UNION': union. result to consist of the sets
of rows retrieved by each *Note `SELECT': select. one after the other,
select an additional column in each *Note `SELECT': select. to use as a
sort column and add an `ORDER BY' following the last *Note `SELECT':
select.:

     (SELECT 1 AS sort_col, col1a, col1b, ... FROM t1)
     UNION
     (SELECT 2, col2a, col2b, ... FROM t2) ORDER BY sort_col;

To additionally maintain sort order within individual *Note `SELECT':
select. results, add a secondary column to the `ORDER BY' clause:

     (SELECT 1 AS sort_col, col1a, col1b, ... FROM t1)
     UNION
     (SELECT 2, col2a, col2b, ... FROM t2) ORDER BY sort_col, col1a;

Use of an additional column also enables you to determine which *Note
`SELECT': select. each row comes from. Extra columns can provide other
identifying information as well, such as a string that indicates a
table name.


File: manual.info,  Node: subqueries,  Next: update,  Prev: select,  Up: sql-syntax-data-manipulation

13.2.10 Subquery Syntax
-----------------------

* Menu:

* scalar-subqueries::            The Subquery as Scalar Operand
* comparisons-using-subqueries::  Comparisons Using Subqueries
* any-in-some-subqueries::       Subqueries with `ANY', `IN', or `SOME'
* all-subqueries::               Subqueries with `ALL'
* row-subqueries::               Row Subqueries
* exists-and-not-exists-subqueries::  Subqueries with `EXISTS' or `NOT EXISTS'
* correlated-subqueries::        Correlated Subqueries
* from-clause-subqueries::       Subqueries in the `FROM' Clause
* subquery-errors::              Subquery Errors
* optimizing-subqueries::        Optimizing Subqueries
* rewriting-subqueries::         Rewriting Subqueries as Joins

A subquery is a *Note `SELECT': select. statement within another
statement.

Starting with MySQL 4.1, all subquery forms and operations that the SQL
standard requires are supported, as well as a few features that are
MySQL-specific.

Here is an example of a subquery:

     SELECT * FROM t1 WHERE column1 = (SELECT column1 FROM t2);

In this example, `SELECT * FROM t1 ...' is the _outer query_ (or _outer
statement_), and `(SELECT column1 FROM t2)' is the _subquery_. We say
that the subquery is _nested_ within the outer query, and in fact it is
possible to nest subqueries within other subqueries, to a considerable
depth. A subquery must always appear within parentheses.

The main advantages of subqueries are:

   * They allow queries that are _structured_ so that it is possible to
     isolate each part of a statement.

   * They provide alternative ways to perform operations that would
     otherwise require complex joins and unions.

   * Many people find subqueries more readable than complex joins or
     unions. Indeed, it was the innovation of subqueries that gave
     people the original idea of calling the early SQL `Structured
     Query Language.'

Here is an example statement that shows the major points about subquery
syntax as specified by the SQL standard and supported in MySQL:

     DELETE FROM t1
     WHERE s11 > ANY
      (SELECT COUNT(*) /* no hint */ FROM t2
       WHERE NOT EXISTS
        (SELECT * FROM t3
         WHERE ROW(5*t2.s1,77)=
          (SELECT 50,11*s1 FROM t4 UNION SELECT 50,77 FROM
           (SELECT * FROM t5) AS t5)));

A subquery can return a scalar (a single value), a single row, a single
column, or a table (one or more rows of one or more columns). These are
called scalar, column, row, and table subqueries. Subqueries that
return a particular kind of result often can be used only in certain
contexts, as described in the following sections.

There are few restrictions on the type of statements in which
subqueries can be used. A subquery can contain many of the keywords or
clauses that an ordinary *Note `SELECT': select. can contain:
`DISTINCT', `GROUP BY', `ORDER BY', `LIMIT', joins, index hints, *Note
`UNION': union. constructs, comments, functions, and so on.

A subquery's outer statement can be any one of: *Note `SELECT': select,
*Note `INSERT': insert, *Note `UPDATE': update, *Note `DELETE': delete,
*Note `SET': set-statement, or *Note `DO': do.

In MySQL, you cannot modify a table and select from the same table in a
subquery. This applies to statements such as *Note `DELETE': delete,
*Note `INSERT': insert, *Note `REPLACE': replace, *Note `UPDATE':
update, and (because subqueries can be used in the `SET' clause) *Note
`LOAD DATA INFILE': load-data.

For information about how the optimizer handles subqueries, see *Note
subquery-optimization-with-exists::. For a discussion of restrictions
on subquery use, including performance issues for certain forms of
subquery syntax, see *Note subquery-restrictions::.


File: manual.info,  Node: scalar-subqueries,  Next: comparisons-using-subqueries,  Prev: subqueries,  Up: subqueries

13.2.10.1 The Subquery as Scalar Operand
........................................

In its simplest form, a subquery is a scalar subquery that returns a
single value. A scalar subquery is a simple operand, and you can use it
almost anywhere a single column value or literal is legal, and you can
expect it to have those characteristics that all operands have: a data
type, a length, an indication that it can be `NULL', and so on.  For
example:

     CREATE TABLE t1 (s1 INT, s2 CHAR(5) NOT NULL);
     INSERT INTO t1 VALUES(100, 'abcde');
     SELECT (SELECT s2 FROM t1);

The subquery in this *Note `SELECT': select.  returns a single value
(`'abcde'') that has a data type of *Note `CHAR': char, a length of 5,
a character set and collation equal to the defaults in effect at *Note
`CREATE TABLE': create-table. time, and an indication that the value in
the column can be `NULL'. Nullability of the value selected by a scalar
subquery is not copied because if the subquery result is empty, the
result is `NULL'. For the subquery just shown, if `t1' were empty, the
result would be `NULL' even though `s2' is `NOT NULL'.

There are a few contexts in which a scalar subquery cannot be used. If
a statement permits only a literal value, you cannot use a subquery.
For example, `LIMIT' requires literal integer arguments, and *Note
`LOAD DATA INFILE': load-data. requires a literal string file name. You
cannot use subqueries to supply these values.

When you see examples in the following sections that contain the rather
spartan construct `(SELECT column1 FROM t1)', imagine that your own
code contains much more diverse and complex constructions.

Suppose that we make two tables:

     CREATE TABLE t1 (s1 INT);
     INSERT INTO t1 VALUES (1);
     CREATE TABLE t2 (s1 INT);
     INSERT INTO t2 VALUES (2);

Then perform a *Note `SELECT': select.:

     SELECT (SELECT s1 FROM t2) FROM t1;

The result is `2' because there is a row in `t2' containing a column
`s1' that has a value of `2'.

A scalar subquery can be part of an expression, but remember the
parentheses, even if the subquery is an operand that provides an
argument for a function. For example:

     SELECT UPPER((SELECT s1 FROM t1)) FROM t2;


File: manual.info,  Node: comparisons-using-subqueries,  Next: any-in-some-subqueries,  Prev: scalar-subqueries,  Up: subqueries

13.2.10.2 Comparisons Using Subqueries
......................................

The most common use of a subquery is in the form:

     NON_SUBQUERY_OPERAND COMPARISON_OPERATOR (SUBQUERY)

Where COMPARISON_OPERATOR is one of these operators:

     =  >  <  >=  <=  <>  !=  <=>

For example:

     ... WHERE 'a' = (SELECT column1 FROM t1)

MySQL also permits this construct:

     NON_SUBQUERY_OPERAND LIKE (SUBQUERY)

At one time the only legal place for a subquery was on the right side
of a comparison, and you might still find some old DBMSs that insist on
this.

Here is an example of a common-form subquery comparison that you cannot
do with a join. It finds all the rows in table `t1' for which the
`column1' value is equal to a maximum value in table `t2':

     SELECT * FROM t1
       WHERE column1 = (SELECT MAX(column2) FROM t2);

Here is another example, which again is impossible with a join because
it involves aggregating for one of the tables. It finds all rows in
table `t1' containing a value that occurs twice in a given column:

     SELECT * FROM t1 AS t
       WHERE 2 = (SELECT COUNT(*) FROM t1 WHERE t1.id = t.id);

For a comparison of the subquery to a scalar, the subquery must return
a scalar. For a comparison of the subquery to a row constructor, the
subquery must be a row subquery that returns a row with the same number
of values as the row constructor. See *Note row-subqueries::.


File: manual.info,  Node: any-in-some-subqueries,  Next: all-subqueries,  Prev: comparisons-using-subqueries,  Up: subqueries

13.2.10.3 Subqueries with `ANY', `IN', or `SOME'
................................................

Syntax:

     OPERAND COMPARISON_OPERATOR ANY (SUBQUERY)
     OPERAND IN (SUBQUERY)
     OPERAND COMPARISON_OPERATOR SOME (SUBQUERY)

Where COMPARISON_OPERATOR is one of these operators:

     =  >  <  >=  <=  <>  !=

The `ANY' keyword, which must follow a comparison operator, means
`return `TRUE' if the comparison is `TRUE' for `ANY' of the values in
the column that the subquery returns.' For example:

     SELECT s1 FROM t1 WHERE s1 > ANY (SELECT s1 FROM t2);

Suppose that there is a row in table `t1' containing `(10)'. The
expression is `TRUE' if table `t2' contains `(21,14,7)' because there
is a value `7' in `t2' that is less than `10'. The expression is
`FALSE' if table `t2' contains `(20,10)', or if table `t2' is empty.
The expression is _unknown_ (that is, `NULL') if table `t2' contains
`(NULL,NULL,NULL)'.

When used with a subquery, the word `IN' is an alias for `= ANY'. Thus,
these two statements are the same:

     SELECT s1 FROM t1 WHERE s1 = ANY (SELECT s1 FROM t2);
     SELECT s1 FROM t1 WHERE s1 IN    (SELECT s1 FROM t2);

`IN' and `= ANY' are not synonyms when used with an expression list.
`IN' can take an expression list, but `= ANY' cannot. See *Note
comparison-operators::.

`NOT IN' is not an alias for `<> ANY', but for `<> ALL'. See *Note
all-subqueries::.

The word `SOME' is an alias for `ANY'. Thus, these two statements are
the same:

     SELECT s1 FROM t1 WHERE s1 <> ANY  (SELECT s1 FROM t2);
     SELECT s1 FROM t1 WHERE s1 <> SOME (SELECT s1 FROM t2);

Use of the word `SOME' is rare, but this example shows why it might be
useful. To most people, the English phrase `a is not equal to any b'
means `there is no b which is equal to a,' but that is not what is
meant by the SQL syntax. The syntax means `there is some b to which a
is not equal.' Using `<> SOME' instead helps ensure that everyone
understands the true meaning of the query.


File: manual.info,  Node: all-subqueries,  Next: row-subqueries,  Prev: any-in-some-subqueries,  Up: subqueries

13.2.10.4 Subqueries with `ALL'
...............................

Syntax:

     OPERAND COMPARISON_OPERATOR ALL (SUBQUERY)

The word `ALL', which must follow a comparison operator, means `return
`TRUE' if the comparison is `TRUE' for `ALL' of the values in the
column that the subquery returns.' For example:

     SELECT s1 FROM t1 WHERE s1 > ALL (SELECT s1 FROM t2);

Suppose that there is a row in table `t1' containing `(10)'. The
expression is `TRUE' if table `t2' contains `(-5,0,+5)' because `10' is
greater than all three values in `t2'. The expression is `FALSE' if
table `t2' contains `(12,6,NULL,-100)' because there is a single value
`12' in table `t2' that is greater than `10'. The expression is
_unknown_ (that is, `NULL') if table `t2' contains `(0,NULL,1)'.

Finally, the expression is `TRUE' if table `t2' is empty. So, the
following expression is `TRUE' when table `t2' is empty:

     SELECT * FROM t1 WHERE 1 > ALL (SELECT s1 FROM t2);

But this expression is `NULL' when table `t2' is empty:

     SELECT * FROM t1 WHERE 1 > (SELECT s1 FROM t2);

In addition, the following expression is `NULL' when table `t2' is
empty:

     SELECT * FROM t1 WHERE 1 > ALL (SELECT MAX(s1) FROM t2);

In general, _tables containing `NULL' values_ and _empty tables_ are
`edge cases.' When writing subqueries, always consider whether you have
taken those two possibilities into account.

`NOT IN' is an alias for `<> ALL'. Thus, these two statements are the
same:

     SELECT s1 FROM t1 WHERE s1 <> ALL (SELECT s1 FROM t2);
     SELECT s1 FROM t1 WHERE s1 NOT IN (SELECT s1 FROM t2);


File: manual.info,  Node: row-subqueries,  Next: exists-and-not-exists-subqueries,  Prev: all-subqueries,  Up: subqueries

13.2.10.5 Row Subqueries
........................

The discussion to this point has been of scalar or column subqueries;
that is, subqueries that return a single value or a column of values. A
_row subquery_ is a subquery variant that returns a single row and can
thus return more than one column value. Legal operators for row subquery
comparisons are:

     =  >  <  >=  <=  <>  !=  <=>

Here are two examples:

     SELECT * FROM t1
       WHERE (col1,col2) = (SELECT col3, col4 FROM t2 WHERE id = 10);
     SELECT * FROM t1
       WHERE ROW(col1,col2) = (SELECT col3, col4 FROM t2 WHERE id = 10);

For both queries, if the table `t2' contains a single row with `id =
10', the subquery returns a single row. If this row has `col3' and
`col4' values equal to the `col1' and `col2' values of any rows in
`t1', the `WHERE' expression is `TRUE' and each query returns those
`t1' rows. If the `t2' row `col3' and `col4' values are not equal the
`col1' and `col2' values of any `t1' row, the expression is `FALSE' and
the query returns an empty result set. The expression is _unknown_
(that is, `NULL') if the subquery produces no rows. An error occurs if
the subquery produces multiple rows because a row subquery can return
at most one row.

The expressions `(1,2)' and `ROW(1,2)' are sometimes called _row
constructors_. The two are equivalent. The row constructor and the row
returned by the subquery must contain the same number of values.

A row constructor is used for comparisons with subqueries that return
two or more columns. When a subquery returns a single column, this is
regarded as a scalar value and not as a row, so a row constructor
cannot be used with a subquery that does not return at least two
columns. Thus, the following query fails with a syntax error:

     SELECT * FROM t1 WHERE ROW(1) = (SELECT column1 FROM t2)

Row constructors are legal in other contexts. For example, the
following two statements are semantically equivalent (and are handled
in the same way by the optimizer):

     SELECT * FROM t1 WHERE (column1,column2) = (1,1);
     SELECT * FROM t1 WHERE column1 = 1 AND column2 = 1;

The following query answers the request, `find all rows in table `t1'
that also exist in table `t2'':

     SELECT column1,column2,column3
       FROM t1
       WHERE (column1,column2,column3) IN
              (SELECT column1,column2,column3 FROM t2);


File: manual.info,  Node: exists-and-not-exists-subqueries,  Next: correlated-subqueries,  Prev: row-subqueries,  Up: subqueries

13.2.10.6 Subqueries with `EXISTS' or `NOT EXISTS'
..................................................

If a subquery returns any rows at all, `EXISTS SUBQUERY' is `TRUE', and
`NOT EXISTS SUBQUERY' is `FALSE'. For example:

     SELECT column1 FROM t1 WHERE EXISTS (SELECT * FROM t2);

Traditionally, an `EXISTS' subquery starts with `SELECT *', but it
could begin with `SELECT 5' or `SELECT column1' or anything at all.
MySQL ignores the *Note `SELECT': select. list in such a subquery, so
it makes no difference.

For the preceding example, if `t2' contains any rows, even rows with
nothing but `NULL' values, the `EXISTS' condition is `TRUE'. This is
actually an unlikely example because a `[NOT] EXISTS' subquery almost
always contains correlations. Here are some more realistic examples:

   * What kind of store is present in one or more cities?

          SELECT DISTINCT store_type FROM stores
            WHERE EXISTS (SELECT * FROM cities_stores
                          WHERE cities_stores.store_type = stores.store_type);

   * What kind of store is present in no cities?

          SELECT DISTINCT store_type FROM stores
            WHERE NOT EXISTS (SELECT * FROM cities_stores
                              WHERE cities_stores.store_type = stores.store_type);

   * What kind of store is present in all cities?

          SELECT DISTINCT store_type FROM stores s1
            WHERE NOT EXISTS (
              SELECT * FROM cities WHERE NOT EXISTS (
                SELECT * FROM cities_stores
                 WHERE cities_stores.city = cities.city
                 AND cities_stores.store_type = stores.store_type));

The last example is a double-nested `NOT EXISTS' query. That is, it has
a `NOT EXISTS' clause within a `NOT EXISTS' clause. Formally, it
answers the question `does a city exist with a store that is not in
`Stores''? But it is easier to say that a nested `NOT EXISTS' answers
the question `is X `TRUE' for all Y?'


File: manual.info,  Node: correlated-subqueries,  Next: from-clause-subqueries,  Prev: exists-and-not-exists-subqueries,  Up: subqueries

13.2.10.7 Correlated Subqueries
...............................

A _correlated subquery_ is a subquery that contains a reference to a
table that also appears in the outer query. For example:

     SELECT * FROM t1
       WHERE column1 = ANY (SELECT column1 FROM t2
                            WHERE t2.column2 = t1.column2);

Notice that the subquery contains a reference to a column of `t1', even
though the subquery's `FROM' clause does not mention a table `t1'. So,
MySQL looks outside the subquery, and finds `t1' in the outer query.

Suppose that table `t1' contains a row where `column1 = 5' and `column2
= 6'; meanwhile, table `t2' contains a row where `column1 = 5' and
`column2 = 7'. The simple expression `... WHERE column1 = ANY (SELECT
column1 FROM t2)' would be `TRUE', but in this example, the `WHERE'
clause within the subquery is `FALSE' (because `(5,6)' is not equal to
`(5,7)'), so the expression as a whole is `FALSE'.

*Scoping rule:* MySQL evaluates from inside to outside. For example:

     SELECT column1 FROM t1 AS x
       WHERE x.column1 = (SELECT column1 FROM t2 AS x
         WHERE x.column1 = (SELECT column1 FROM t3
           WHERE x.column2 = t3.column1));

In this statement, `x.column2' must be a column in table `t2' because
`SELECT column1 FROM t2 AS x ...' renames `t2'. It is not a column in
table `t1' because `SELECT column1 FROM t1 ...' is an outer query that
is _farther out_.

For subqueries in `HAVING' or `ORDER BY' clauses, MySQL also looks for
column names in the outer select list.

For certain cases, a correlated subquery is optimized. For example:

     VAL IN (SELECT KEY_VAL FROM TBL_NAME WHERE CORRELATED_CONDITION)

Otherwise, they are inefficient and likely to be slow. Rewriting the
query as a join might improve performance.

Aggregate functions in correlated subqueries may contain outer
references, provided the function contains nothing but outer
references, and provided the function is not contained in another
function or expression.


File: manual.info,  Node: from-clause-subqueries,  Next: subquery-errors,  Prev: correlated-subqueries,  Up: subqueries

13.2.10.8 Subqueries in the `FROM' Clause
.........................................

Subqueries are legal in a *Note `SELECT': select.  statement's `FROM'
clause. The actual syntax is:

     SELECT ... FROM (SUBQUERY) [AS] NAME ...

The `[AS] NAME' clause is mandatory, because every table in a `FROM'
clause must have a name. Any columns in the SUBQUERY select list must
have unique names.

For the sake of illustration, assume that you have this table:

     CREATE TABLE t1 (s1 INT, s2 CHAR(5), s3 FLOAT);

Here is how to use a subquery in the `FROM' clause, using the example
table:

     INSERT INTO t1 VALUES (1,'1',1.0);
     INSERT INTO t1 VALUES (2,'2',2.0);
     SELECT sb1,sb2,sb3
       FROM (SELECT s1 AS sb1, s2 AS sb2, s3*2 AS sb3 FROM t1) AS sb
       WHERE sb1 > 1;

Result: `2, '2', 4.0'.

Here is another example: Suppose that you want to know the average of a
set of sums for a grouped table. This does not work:

     SELECT AVG(SUM(column1)) FROM t1 GROUP BY column1;

However, this query provides the desired information:

     SELECT AVG(sum_column1)
       FROM (SELECT SUM(column1) AS sum_column1
             FROM t1 GROUP BY column1) AS t1;

Notice that the column name used within the subquery (`sum_column1') is
recognized in the outer query.

Subqueries in the `FROM' clause can return a scalar, column, row, or
table. Subqueries in the `FROM' clause cannot be correlated subqueries,
unless used within the `ON' clause of a `JOIN' operation.

Subqueries in the `FROM' clause are executed even for the *Note
`EXPLAIN': explain. statement (that is, derived temporary tables are
materialized). This occurs because upper-level queries need information
about all tables during the optimization phase, and the table
represented by a subquery in the `FROM' clause is unavailable unless
the subquery is executed.

It is possible under certain circumstances to modify table data using
*Note `EXPLAIN SELECT': explain. This can occur if the outer query
accesses any tables and an inner query invokes a stored function that
changes one or more rows of a table. Suppose that there are two tables
`t1' and `t2' in database `d1', created as shown here:

     mysql> CREATE DATABASE d1;
     Query OK, 1 row affected (0.00 sec)

     mysql> USE d1;
     Database changed

     mysql> CREATE TABLE t1 (c1 INT);
     Query OK, 0 rows affected (0.15 sec)

     mysql> CREATE TABLE t2 (c1 INT);
     Query OK, 0 rows affected (0.08 sec)

Now we create a stored function `f1' which modifies `t2':

     mysql> DELIMITER //
     mysql> CREATE FUNCTION f1(p1 INT) RETURNS INT
     mysql>   BEGIN
     mysql>     INSERT INTO t2 VALUES (p1);
     mysql>     RETURN p1;
     mysql>   END //
     Query OK, 0 rows affected (0.01 sec)

     mysql> DELIMITER ;

Referencing the function directly in an *Note `EXPLAIN SELECT':
explain. does not have any effect on `t2', as shown here:

     mysql> SELECT * FROM t2;
     Empty set (0.00 sec)

     mysql> EXPLAIN SELECT f1(5);
     +----+-------------+-------+------+---------------+------+---------+------+------+----------------+
     | id | select_type | table | type | possible_keys | key  | key_len | ref  | rows | Extra          |
     +----+-------------+-------+------+---------------+------+---------+------+------+----------------+
     |  1 | SIMPLE      | NULL  | NULL | NULL          | NULL | NULL    | NULL | NULL | No tables used |
     +----+-------------+-------+------+---------------+------+---------+------+------+----------------+
     1 row in set (0.00 sec)

     mysql> SELECT * FROM t2;
     Empty set (0.00 sec)

This is because the *Note `SELECT': select.  statement did not
reference any tables, as can be seen in the `table' and `Extra' columns
of the output. This is also true of the following nested *Note
`SELECT': select.:

     mysql> EXPLAIN SELECT NOW() AS a1, (SELECT f1(5)) AS a2;
     +----+-------------+-------+------+---------------+------+---------+------+------+----------------+
     | id | select_type | table | type | possible_keys | key  | key_len | ref  | rows | Extra          |
     +----+-------------+-------+------+---------------+------+---------+------+------+----------------+
     |  1 | PRIMARY     | NULL  | NULL | NULL          | NULL | NULL    | NULL | NULL | No tables used |
     +----+-------------+-------+------+---------------+------+---------+------+------+----------------+
     1 row in set, 1 warning (0.00 sec)

     mysql> SHOW WARNINGS;
     +-------+------+------------------------------------------+
     | Level | Code | Message                                  |
     +-------+------+------------------------------------------+
     | Note  | 1249 | Select 2 was reduced during optimization |
     +-------+------+------------------------------------------+
     1 row in set (0.00 sec)

     mysql> SELECT * FROM t2;
     Empty set (0.00 sec)

However, if the outer *Note `SELECT': select.  references any tables,
the optimizer executes the statement in the subquery as well:

     mysql> EXPLAIN SELECT * FROM t1 AS a1, (SELECT f1(5)) AS a2;
     +----+-------------+------------+--------+---------------+------+---------+------+------+---------------------+
     | id | select_type | table      | type   | possible_keys | key  | key_len | ref  | rows | Extra               |
     +----+-------------+------------+--------+---------------+------+---------+------+------+---------------------+
     |  1 | PRIMARY     | a1         | system | NULL          | NULL | NULL    | NULL |    0 | const row not found |
     |  1 | PRIMARY     | <derived2> | system | NULL          | NULL | NULL    | NULL |    1 |                     |
     |  2 | DERIVED     | NULL       | NULL   | NULL          | NULL | NULL    | NULL | NULL | No tables used      |
     +----+-------------+------------+--------+---------------+------+---------+------+------+---------------------+
     3 rows in set (0.00 sec)

     mysql> SELECT * FROM t2;
     +------+
     | c1   |
     +------+
     |    5 |
     +------+
     1 row in set (0.00 sec)

This also means that an *Note `EXPLAIN SELECT': explain. statement such
as the one shown here may take a long time to execute because the
`BENCHMARK()' function is executed once for each row in `t1':

     EXPLAIN SELECT * FROM t1 AS a1, (SELECT BENCHMARK(1000000, MD5(NOW())));


File: manual.info,  Node: subquery-errors,  Next: optimizing-subqueries,  Prev: from-clause-subqueries,  Up: subqueries

13.2.10.9 Subquery Errors
.........................

There are some errors that apply only to subqueries. This section
describes them.

   * Unsupported subquery syntax:

          ERROR 1235 (ER_NOT_SUPPORTED_YET)
          SQLSTATE = 42000
          Message = "This version of MySQL doesn't yet support
          'LIMIT & IN/ALL/ANY/SOME subquery'"

     This means that MySQL does not support statements of the following
     form:

          SELECT * FROM t1 WHERE s1 IN (SELECT s2 FROM t2 ORDER BY s1 LIMIT 1)

   * Incorrect number of columns from subquery:

          ERROR 1241 (ER_OPERAND_COL)
          SQLSTATE = 21000
          Message = "Operand should contain 1 column(s)"

     This error occurs in cases like this:

          SELECT (SELECT column1, column2 FROM t2) FROM t1;

     You may use a subquery that returns multiple columns, if the
     purpose is row comparison. In other contexts, the subquery must be
     a scalar operand. See *Note row-subqueries::.

   * Incorrect number of rows from subquery:

          ERROR 1242 (ER_SUBSELECT_NO_1_ROW)
          SQLSTATE = 21000
          Message = "Subquery returns more than 1 row"

     This error occurs for statements where the subquery must return at
     most one row but returns multiple rows. Consider the following
     example:

          SELECT * FROM t1 WHERE column1 = (SELECT column1 FROM t2);

     If `SELECT column1 FROM t2' returns just one row, the previous
     query will work. If the subquery returns more than one row, error
     1242 will occur. In that case, the query should be rewritten as:

          SELECT * FROM t1 WHERE column1 = ANY (SELECT column1 FROM t2);

   * Incorrectly used table in subquery:

          Error 1093 (ER_UPDATE_TABLE_USED)
          SQLSTATE = HY000
          Message = "You can't specify target table 'x'
          for update in FROM clause"

     This error occurs in cases such as the following, which attempts
     to modify a table and select from the same table in the subquery:

          UPDATE t1 SET column2 = (SELECT MAX(column1) FROM t1);

     You can use a subquery for assignment within an *Note `UPDATE':
     update. statement because subqueries are legal in *Note `UPDATE':
     update. and *Note `DELETE': delete. statements as well as in *Note
     `SELECT': select. statements.  However, you cannot use the same
     table (in this case, table `t1') for both the subquery `FROM'
     clause and the update target.

For transactional storage engines, the failure of a subquery causes the
entire statement to fail. For nontransactional storage engines, data
modifications made before the error was encountered are preserved.


File: manual.info,  Node: optimizing-subqueries,  Next: rewriting-subqueries,  Prev: subquery-errors,  Up: subqueries

13.2.10.10 Optimizing Subqueries
................................

Development is ongoing, so no optimization tip is reliable for the long
term. The following list provides some interesting tricks that you
might want to play with:

   * Use subquery clauses that affect the number or order of the rows
     in the subquery. For example:

          SELECT * FROM t1 WHERE t1.column1 IN
            (SELECT column1 FROM t2 ORDER BY column1);
          SELECT * FROM t1 WHERE t1.column1 IN
            (SELECT DISTINCT column1 FROM t2);
          SELECT * FROM t1 WHERE EXISTS
            (SELECT * FROM t2 LIMIT 1);

   * Replace a join with a subquery. For example, try this:

          SELECT DISTINCT column1 FROM t1 WHERE t1.column1 IN (
            SELECT column1 FROM t2);

     Instead of this:

          SELECT DISTINCT t1.column1 FROM t1, t2
            WHERE t1.column1 = t2.column1;

   * Some subqueries can be transformed to joins for compatibility with
     older versions of MySQL that do not support subqueries. However,
     in some cases, converting a subquery to a join may improve
     performance. See *Note rewriting-subqueries::.

   * Move clauses from outside to inside the subquery. For example, use
     this query:

          SELECT * FROM t1
            WHERE s1 IN (SELECT s1 FROM t1 UNION ALL SELECT s1 FROM t2);

     Instead of this query:

          SELECT * FROM t1
            WHERE s1 IN (SELECT s1 FROM t1) OR s1 IN (SELECT s1 FROM t2);

     For another example, use this query:

          SELECT (SELECT column1 + 5 FROM t1) FROM t2;

     Instead of this query:

          SELECT (SELECT column1 FROM t1) + 5 FROM t2;

   * Use a row subquery instead of a correlated subquery. For example,
     use this query:

          SELECT * FROM t1
            WHERE (column1,column2) IN (SELECT column1,column2 FROM t2);

     Instead of this query:

          SELECT * FROM t1
            WHERE EXISTS (SELECT * FROM t2 WHERE t2.column1=t1.column1
                          AND t2.column2=t1.column2);

   * Use `NOT (a = ANY (...))' rather than `a <> ALL (...)'.

   * Use `x = ANY (TABLE CONTAINING (1,2))' rather than `x=1 OR x=2'.

   * Use `= ANY' rather than `EXISTS'.

   * For uncorrelated subqueries that always return one row, `IN' is
     always slower than `='. For example, use this query:

          SELECT * FROM t1
            WHERE t1.COL_NAME = (SELECT a FROM t2 WHERE b = SOME_CONST);

     Instead of this query:

          SELECT * FROM t1
            WHERE t1.COL_NAME IN (SELECT a FROM t2 WHERE b = SOME_CONST);

These tricks might cause programs to go faster or slower. Using MySQL
facilities like the `BENCHMARK()' function, you can get an idea about
what helps in your own situation. See *Note information-functions::.

Some optimizations that MySQL itself makes are:

   * MySQL executes uncorrelated subqueries only once. Use *Note
     `EXPLAIN': explain. to make sure that a given subquery really is
     uncorrelated.

   * MySQL rewrites `IN', `ALL', `ANY', and `SOME' subqueries in an
     attempt to take advantage of the possibility that the select-list
     columns in the subquery are indexed.

   * MySQL replaces subqueries of the following form with an
     index-lookup function, which *Note `EXPLAIN': explain. describes
     as a special join type (`unique_subquery' or `index_subquery'):

          ... IN (SELECT INDEXED_COLUMN FROM SINGLE_TABLE ...)

   * MySQL enhances expressions of the following form with an
     expression involving `MIN()' or `MAX()', unless `NULL' values or
     empty sets are involved:

          VALUE {ALL|ANY|SOME} {> | < | >= | <=} (UNCORRELATED SUBQUERY)

     For example, this `WHERE' clause:

          WHERE 5 > ALL (SELECT x FROM t)

     might be treated by the optimizer like this:

          WHERE 5 > (SELECT MAX(x) FROM t)

See also MySQL Internals: How MySQL Transforms Subqueries
(http://dev.mysql.com/doc/internals/en/transformations.html).


File: manual.info,  Node: rewriting-subqueries,  Prev: optimizing-subqueries,  Up: subqueries

13.2.10.11 Rewriting Subqueries as Joins
........................................

Sometimes there are other ways to test membership in a set of values
than by using a subquery. Also, on some occasions, it is not only
possible to rewrite a query without a subquery, but it can be more
efficient to make use of some of these techniques rather than to use
subqueries. One of these is the `IN()' construct:

For example, this query:

     SELECT * FROM t1 WHERE id IN (SELECT id FROM t2);

Can be rewritten as:

     SELECT DISTINCT t1.* FROM t1, t2 WHERE t1.id=t2.id;

The queries:

     SELECT * FROM t1 WHERE id NOT IN (SELECT id FROM t2);
     SELECT * FROM t1 WHERE NOT EXISTS (SELECT id FROM t2 WHERE t1.id=t2.id);

Can be rewritten as:

     SELECT table1.*
       FROM table1 LEFT JOIN table2 ON table1.id=table2.id
       WHERE table2.id IS NULL;

A `LEFT [OUTER] JOIN' can be faster than an equivalent subquery because
the server might be able to optimize it better--a fact that is not
specific to MySQL Server alone. Prior to SQL-92, outer joins did not
exist, so subqueries were the only way to do certain things. Today,
MySQL Server and many other modern database systems offer a wide range
of outer join types.

MySQL Server supports multiple-table *Note `DELETE': delete. statements
that can be used to efficiently delete rows based on information from
one table or even from many tables at the same time. Multiple-table
*Note `UPDATE': update. statements are also supported. See *Note
delete::, and *Note update::.


File: manual.info,  Node: update,  Prev: subqueries,  Up: sql-syntax-data-manipulation

13.2.11 `UPDATE' Syntax
-----------------------

Single-table syntax:

     UPDATE [LOW_PRIORITY] [IGNORE] TABLE_REFERENCE
         SET COL_NAME1={EXPR1|DEFAULT} [, COL_NAME2={EXPR2|DEFAULT}] ...
         [WHERE WHERE_CONDITION]
         [ORDER BY ...]
         [LIMIT ROW_COUNT]

Multiple-table syntax:

     UPDATE [LOW_PRIORITY] [IGNORE] TABLE_REFERENCES
         SET COL_NAME1={EXPR1|DEFAULT} [, COL_NAME2={EXPR2|DEFAULT}] ...
         [WHERE WHERE_CONDITION]

For the single-table syntax, the *Note `UPDATE': update. statement
updates columns of existing rows in the named table with new values. The
`SET' clause indicates which columns to modify and the values they
should be given. Each value can be given as an expression, or the
keyword `DEFAULT' to set a column explicitly to its default value. The
`WHERE' clause, if given, specifies the conditions that identify which
rows to update. With no `WHERE' clause, all rows are updated. If the
`ORDER BY' clause is specified, the rows are updated in the order that
is specified. The `LIMIT' clause places a limit on the number of rows
that can be updated.

For the multiple-table syntax, *Note `UPDATE': update. updates rows in
each table named in TABLE_REFERENCES that satisfy the conditions. In
this case, `ORDER BY' and `LIMIT' cannot be used.

WHERE_CONDITION is an expression that evaluates to true for each row to
be updated. For expression syntax, see *Note expressions::.

TABLE_REFERENCES and WHERE_CONDITION are is specified as described in
*Note select::.

You need the `UPDATE' privilege only for columns referenced in an *Note
`UPDATE': update.  that are actually updated. You need only the
`SELECT' privilege for any columns that are read but not modified.

The *Note `UPDATE': update. statement supports the following modifiers:

   * With the `LOW_PRIORITY' keyword, execution of the *Note `UPDATE':
     update. is delayed until no other clients are reading from the
     table. This affects only storage engines that use only table-level
     locking (such as `MyISAM', `MEMORY', and `MERGE').

   * With the `IGNORE' keyword, the update statement does not abort
     even if errors occur during the update. Rows for which
     duplicate-key conflicts occur are not updated. Rows for which
     columns are updated to values that would cause data conversion
     errors are updated to the closest valid values instead.

In MySQL 5.5.18 and later, *Note `UPDATE IGNORE': update.  statements,
including those having an `ORDER BY' clause, are flagged as unsafe for
statement-based replication.  (This is because the order in which the
rows are updated determines which rows are ignored.) With this change,
such statements produce a warning in the log when using statement-based
mode and are logged using the row-based format when using `MIXED' mode.
(Bug #11758262, Bug #50439) See *Note replication-rbr-safe-unsafe::,
for more information.

If you access a column from the table to be updated in an expression,
*Note `UPDATE': update. uses the current value of the column. For
example, the following statement sets `col1' to one more than its
current value:

     UPDATE t1 SET col1 = col1 + 1;

The second assignment in the following statement sets `col2' to the
current (updated) `col1' value, not the original `col1' value. The
result is that `col1' and `col2' have the same value. This behavior
differs from standard SQL.

     UPDATE t1 SET col1 = col1 + 1, col2 = col1;

Single-table *Note `UPDATE': update. assignments are generally
evaluated from left to right. For multiple-table updates, there is no
guarantee that assignments are carried out in any particular order.

If you set a column to the value it currently has, MySQL notices this
and does not update it.

If you update a column that has been declared `NOT NULL' by setting to
`NULL', an error occurs if strict SQL mode is enabled; otherwise, the
column is set to the implicit default value for the column data type
and the warning count is incremented. The implicit default value is `0'
for numeric types, the empty string (`''') for string types, and the
`zero' value for date and time types. See *Note data-type-defaults::.

*Note `UPDATE': update. returns the number of rows that were actually
changed. The *Note `mysql_info()': mysql-info. C API function returns
the number of rows that were matched and updated and the number of
warnings that occurred during the *Note `UPDATE': update.

You can use `LIMIT ROW_COUNT' to restrict the scope of the *Note
`UPDATE': update. A `LIMIT' clause is a rows-matched restriction. The
statement stops as soon as it has found ROW_COUNT rows that satisfy the
`WHERE' clause, whether or not they actually were changed.

If an *Note `UPDATE': update. statement includes an `ORDER BY' clause,
the rows are updated in the order specified by the clause. This can be
useful in certain situations that might otherwise result in an error.
Suppose that a table `t' contains a column `id' that has a unique
index. The following statement could fail with a duplicate-key error,
depending on the order in which rows are updated:

     UPDATE t SET id = id + 1;

For example, if the table contains 1 and 2 in the `id' column and 1 is
updated to 2 before 2 is updated to 3, an error occurs. To avoid this
problem, add an `ORDER BY' clause to cause the rows with larger `id'
values to be updated before those with smaller values:

     UPDATE t SET id = id + 1 ORDER BY id DESC;

You can also perform *Note `UPDATE': update.  operations covering
multiple tables. However, you cannot use `ORDER BY' or `LIMIT' with a
multiple-table *Note `UPDATE': update. The TABLE_REFERENCES clause
lists the tables involved in the join. Its syntax is described in *Note
join::. Here is an example:

     UPDATE items,month SET items.price=month.price
     WHERE items.id=month.id;

The preceding example shows an inner join that uses the comma operator,
but multiple-table *Note `UPDATE': update.  statements can use any type
of join permitted in *Note `SELECT': select. statements, such as `LEFT
JOIN'.

If you use a multiple-table *Note `UPDATE': update.  statement
involving `InnoDB' tables for which there are foreign key constraints,
the MySQL optimizer might process tables in an order that differs from
that of their parent/child relationship. In this case, the statement
fails and rolls back. Instead, update a single table and rely on the
`ON UPDATE' capabilities that `InnoDB' provides to cause the other
tables to be modified accordingly. See *Note
innodb-foreign-key-constraints::.

Currently, you cannot update a table and select from the same table in
a subquery.

Index hints (see *Note index-hints::) are accepted but ignored for
*Note `UPDATE': update. statements.

An `UPDATE' on a partitioned table using a storage engine such as *Note
`MyISAM': myisam-storage-engine. that employs table-level locks locks
all partitions of the table. This does not occur with tables using
storage engines such as *Note `InnoDB': innodb-storage-engine. that
employ row-level locking.  This issue is resolved in MySQL 5.6. See
*Note partitioning-limitations-locking::, for more information.


File: manual.info,  Node: sql-syntax-transactions,  Next: sql-syntax-replication,  Prev: sql-syntax-data-manipulation,  Up: sql-syntax

13.3 MySQL Transactional and Locking Statements
===============================================

* Menu:

* commit::                       `START TRANSACTION', `COMMIT', and `ROLLBACK' Syntax
* cannot-roll-back::             Statements That Cannot Be Rolled Back
* implicit-commit::              Statements That Cause an Implicit Commit
* savepoint::                    `SAVEPOINT', `ROLLBACK TO SAVEPOINT', and `RELEASE SAVEPOINT' Syntax
* lock-tables::                  `LOCK TABLES' and `UNLOCK TABLES' Syntax
* set-transaction::              `SET TRANSACTION' Syntax
* xa::                           XA Transactions

MySQL supports local transactions (within a given client session)
through statements such as *Note `SET autocommit': commit, *Note `START
TRANSACTION': commit, *Note `COMMIT': commit, and *Note `ROLLBACK':
commit. See *Note commit::. XA transaction support enables MySQL to
participate in distributed transactions as well. See *Note xa::.


File: manual.info,  Node: commit,  Next: cannot-roll-back,  Prev: sql-syntax-transactions,  Up: sql-syntax-transactions

13.3.1 `START TRANSACTION', `COMMIT', and `ROLLBACK' Syntax
-----------------------------------------------------------

     START TRANSACTION [WITH CONSISTENT SNAPSHOT]
     BEGIN [WORK]
     COMMIT [WORK] [AND [NO] CHAIN] [[NO] RELEASE]
     ROLLBACK [WORK] [AND [NO] CHAIN] [[NO] RELEASE]
     SET autocommit = {0 | 1}

These statements provide control over use of transactions:

   * `START TRANSACTION' or `BEGIN' start a new transaction.

   * `COMMIT' commits the current transaction, making its changes
     permanent.

   * `ROLLBACK' rolls back the current transaction, canceling its
     changes.

   * `SET autocommit' disables or enables the default autocommit mode
     for the current session.

By default, MySQL runs with autocommit mode enabled.  This means that
as soon as you execute a statement that updates (modifies) a table,
MySQL stores the update on disk to make it permanent. The change cannot
be rolled back.

To disable autocommit mode implicitly for a single series of
statements, use the `START TRANSACTION' statement:

     START TRANSACTION;
     SELECT @A:=SUM(salary) FROM table1 WHERE type=1;
     UPDATE table2 SET summary=@A WHERE type=1;
     COMMIT;

With `START TRANSACTION', autocommit remains disabled until you end the
transaction with `COMMIT' or `ROLLBACK'. The autocommit mode then
reverts to its previous state.

You can also begin a transaction like this:

     START TRANSACTION WITH CONSISTENT SNAPSHOT;

The `WITH CONSISTENT SNAPSHOT' option starts a consistent read for
storage engines that are capable of it. This applies only to `InnoDB'.
The effect is the same as issuing a `START TRANSACTION' followed by a
*Note `SELECT': select. from any `InnoDB' table. See *Note
innodb-consistent-read::. The `WITH CONSISTENT SNAPSHOT' option does
not change the current transaction isolation level, so it provides a
consistent snapshot only if the current isolation level is one that
permits a consistent read. The only isolation level that permits a
consistent read is `REPEATABLE READ'. For all other isolation levels,
the `WITH CONSISTENT SNAPSHOT' clause is ignored. As of MySQL 5.5.34, a
warning is generated when the `WITH CONSISTENT SNAPSHOT' is ignored.

*Important*:

Many APIs used for writing MySQL client applications (such as JDBC)
provide their own methods for starting transactions that can (and
sometimes should) be used instead of sending a `START TRANSACTION'
statement from the client.  See *Note connectors-apis::, or the
documentation for your API, for more information.

To disable autocommit mode explicitly, use the following statement:

     SET autocommit=0;

After disabling autocommit mode by setting the `autocommit' variable to
zero, changes to transaction-safe tables (such as those for *Note
`InnoDB': innodb-storage-engine. or *Note `NDBCLUSTER': mysql-cluster.)
are not made permanent immediately. You must use `COMMIT' to store your
changes to disk or `ROLLBACK' to ignore the changes.

`autocommit' is a session variable and must be set for each session. To
disable autocommit mode for each new connection, see the description of
the `autocommit' system variable at *Note server-system-variables::.

`BEGIN' and `BEGIN WORK' are supported as aliases of `START
TRANSACTION' for initiating a transaction. `START TRANSACTION' is
standard SQL syntax and is the recommended way to start an ad-hoc
transaction.

The `BEGIN' statement differs from the use of the `BEGIN' keyword that
starts a *Note `BEGIN ... END': begin-end.  compound statement. The
latter does not begin a transaction. See *Note begin-end::.

*Note*:

Within all stored programs (stored procedures and functions, triggers,
and events), the parser treats `BEGIN [WORK]' as the beginning of a
*Note `BEGIN ... END': begin-end. block. Begin a transaction in this
context with `START TRANSACTION' instead.

The optional `WORK' keyword is supported for `COMMIT' and `ROLLBACK',
as are the `CHAIN' and `RELEASE' clauses. `CHAIN' and `RELEASE' can be
used for additional control over transaction completion.  The value of
the `completion_type' system variable determines the default completion
behavior. See *Note server-system-variables::.

The `AND CHAIN' clause causes a new transaction to begin as soon as the
current one ends, and the new transaction has the same isolation level
as the just-terminated transaction.  The `RELEASE' clause causes the
server to disconnect the current client session after terminating the
current transaction. Including the `NO' keyword suppresses `CHAIN' or
`RELEASE' completion, which can be useful if the `completion_type'
system variable is set to cause chaining or release completion by
default.

Beginning a transaction causes any pending transaction to be committed.
See *Note implicit-commit::, for more information.

Beginning a transaction also causes table locks acquired with *Note
`LOCK TABLES': lock-tables. to be released, as though you had executed
*Note `UNLOCK TABLES': lock-tables. Beginning a transaction does not
release a global read lock acquired with *Note `FLUSH TABLES WITH READ
LOCK': flush.

For best results, transactions should be performed using only tables
managed by a single transaction-safe storage engine.  Otherwise, the
following problems can occur:

   * If you use tables from more than one transaction-safe storage
     engine (such as `InnoDB'), and the transaction isolation level is
     not `SERIALIZABLE', it is possible that when one transaction
     commits, another ongoing transaction that uses the same tables
     will see only some of the changes made by the first transaction.
     That is, the atomicity of transactions is not guaranteed with
     mixed engines and inconsistencies can result. (If mixed-engine
     transactions are infrequent, you can use *Note `SET TRANSACTION
     ISOLATION LEVEL': set-transaction. to set the isolation level to
     `SERIALIZABLE' on a per-transaction basis as necessary.)

   * If you use tables that are not transaction-safe within a
     transaction, changes to those tables are stored at once,
     regardless of the status of autocommit mode.

   * If you issue a *Note `ROLLBACK': commit.  statement after updating
     a nontransactional table within a transaction, an
     `ER_WARNING_NOT_COMPLETE_ROLLBACK' warning occurs. Changes to
     transaction-safe tables are rolled back, but not changes to
     nontransaction-safe tables.

Each transaction is stored in the binary log in one chunk, upon *Note
`COMMIT': commit. Transactions that are rolled back are not logged.
(*Exception*: Modifications to nontransactional tables cannot be rolled
back. If a transaction that is rolled back includes modifications to
nontransactional tables, the entire transaction is logged with a *Note
`ROLLBACK': commit.  statement at the end to ensure that modifications
to the nontransactional tables are replicated.) See *Note binary-log::.

You can change the isolation level for transactions with the *Note `SET
TRANSACTION': set-transaction. statement. See *Note set-transaction::.

Rolling back can be a slow operation that may occur implicitly without
the user having explicitly asked for it (for example, when an error
occurs). Because of this, *Note `SHOW PROCESSLIST': show-processlist.
displays `Rolling back' in the `State' column for the session, not only
for explicit rollbacks performed with the *Note `ROLLBACK': commit.
statement but also for implicit rollbacks.

*Note*:

In MySQL 5.5, `BEGIN', `COMMIT', and `ROLLBACK' are not affected by
`--replicate-do-db' or `--replicate-ignore-db' rules.


File: manual.info,  Node: cannot-roll-back,  Next: implicit-commit,  Prev: commit,  Up: sql-syntax-transactions

13.3.2 Statements That Cannot Be Rolled Back
--------------------------------------------

Some statements cannot be rolled back. In general, these include data
definition language (DDL) statements, such as those that create or drop
databases, those that create, drop, or alter tables or stored routines.

You should design your transactions not to include such statements. If
you issue a statement early in a transaction that cannot be rolled
back, and then another statement later fails, the full effect of the
transaction cannot be rolled back in such cases by issuing a *Note
`ROLLBACK': commit.  statement.


File: manual.info,  Node: implicit-commit,  Next: savepoint,  Prev: cannot-roll-back,  Up: sql-syntax-transactions

13.3.3 Statements That Cause an Implicit Commit
-----------------------------------------------

The statements listed in this section (and any synonyms for them)
implicitly end any transaction active in the current session, as if you
had done a *Note `COMMIT': commit. before executing the statement. As
of MySQL 5.5.3, most of these statements also cause an implicit commit
after executing; for additional details, see the end of this section.

   * *Data definition language (DDL) statements that define or modify
     database objects.* `ALTER DATABASE ... UPGRADE DATA DIRECTORY
     NAME', *Note `ALTER EVENT': alter-event, *Note `ALTER PROCEDURE':
     alter-procedure, *Note `ALTER SERVER': alter-server, *Note `ALTER
     TABLE': alter-table, *Note `ALTER VIEW': alter-view, *Note `CREATE
     DATABASE': create-database, *Note `CREATE EVENT': create-event,
     *Note `CREATE INDEX': create-index, *Note `CREATE PROCEDURE':
     create-procedure, *Note `CREATE SERVER': create-server, *Note
     `CREATE TABLE': create-table, *Note `CREATE TRIGGER':
     create-trigger, *Note `CREATE VIEW': create-view, *Note `DROP
     DATABASE': drop-database, *Note `DROP EVENT': drop-event, *Note
     `DROP INDEX': drop-index, *Note `DROP PROCEDURE': drop-procedure,
     *Note `DROP SERVER': drop-server, *Note `DROP TABLE': drop-table,
     *Note `DROP TRIGGER': drop-trigger, *Note `DROP VIEW': drop-view,
     *Note `RENAME TABLE': rename-table, *Note `TRUNCATE TABLE':
     truncate-table.

     *Note `ALTER FUNCTION': alter-function, *Note `CREATE FUNCTION':
     create-function. and *Note `DROP FUNCTION': drop-function. also
     cause an implicit commit when used with stored functions, but not
     with UDFs. (*Note `ALTER FUNCTION': alter-function. can only be
     used with stored functions.)

     *Note `ALTER TABLE': alter-table, *Note `CREATE TABLE':
     create-table, and *Note `DROP TABLE': drop-table. do not commit a
     transaction if the `TEMPORARY' keyword is used. (This does not
     apply to other operations on temporary tables such as *Note
     `CREATE INDEX': create-index, which do cause a commit.) However,
     although no implicit commit occurs, neither can the statement be
     rolled back. Therefore, use of such statements will violate
     transaction atomicity: For example, if you use *Note `CREATE
     TEMPORARY TABLE': create-table. and then roll back the
     transaction, the table remains in existence.

     The *Note `CREATE TABLE': create-table. statement in `InnoDB' is
     processed as a single transaction. This means that a *Note
     `ROLLBACK': commit.  from the user does not undo *Note `CREATE
     TABLE': create-table. statements the user made during that
     transaction.

     *Note `CREATE TABLE ... SELECT': create-table. causes an implicit
     commit before and after the statement is executed when you are
     creating nontemporary tables. (No commit occurs for `CREATE
     TEMPORARY TABLE ... SELECT'.) This is to prevent an issue during
     replication where the table could be created on the master after a
     rollback, but fail to be recorded in the binary log, and therefore
     not replicated to the slave. For more information, see Bug #22865.

   * *Statements that implicitly use or modify tables in the `mysql'
     database.* *Note `CREATE USER': create-user, *Note `DROP USER':
     drop-user, *Note `GRANT': grant, *Note `RENAME USER': rename-user,
     *Note `REVOKE': revoke, *Note `SET PASSWORD': set-password.

   * *Transaction-control and locking statements.* *Note `BEGIN':
     commit, *Note `LOCK TABLES': lock-tables, `SET autocommit = 1' (if
     the value is not already 1), *Note `START TRANSACTION': commit,
     *Note `UNLOCK TABLES': lock-tables.

     *Note `UNLOCK TABLES': lock-tables. commits a transaction only if
     any tables currently have been locked with *Note `LOCK TABLES':
     lock-tables. to acquire nontransactional table locks. A commit
     does not occur for *Note `UNLOCK TABLES': lock-tables. following
     *Note `FLUSH TABLES WITH READ LOCK': flush. because the latter
     statement does not acquire table-level locks.

     Transactions cannot be nested. This is a consequence of the
     implicit commit performed for any current transaction when you
     issue a *Note `START TRANSACTION': commit. statement or one of its
     synonyms.

     Statements that cause an implicit commit cannot be used in an XA
     transaction while the transaction is in an `ACTIVE' state.

     The *Note `BEGIN': commit.  statement differs from the use of the
     `BEGIN' keyword that starts a *Note `BEGIN ... END': begin-end.
     compound statement. The latter does not cause an implicit commit.
     See *Note begin-end::.

   * *Data loading statements.* *Note `LOAD DATA INFILE': load-data.
     *Note `LOAD DATA INFILE': load-data. causes an implicit commit
     only for tables using the *Note `NDB': mysql-cluster. storage
     engine. For more information, see Bug #11151.

   * *Administrative statements.* *Note `ANALYZE TABLE': analyze-table,
     *Note `CACHE INDEX': cache-index, *Note `CHECK TABLE': check-table,
     *Note `LOAD INDEX INTO CACHE': load-index, *Note `OPTIMIZE TABLE':
     optimize-table, *Note `REPAIR TABLE': repair-table.

As of MySQL 5.5.3, most statements that previously caused an implicit
commit before executing also do so after executing. The intent is to
handle each such statement in its own special transaction because it
cannot be rolled back anyway. The following list provides additional
details pertaining to this change:

   * The *Note `CREATE TABLE': create-table. variants (*Note `CREATE
     TABLE': create-table. for `InnoDB' tables and *Note `CREATE TABLE
     ... SELECT': create-table.) that previously were special cases no
     longer are so because *Note `CREATE TABLE': create-table.
     uniformly causes an implicit commit before and after executing.

   * The *Note `FLUSH': flush. and *Note `RESET': reset. statements
     cause an implicit commit.

   * Transaction-control and locking statements behave as before.


File: manual.info,  Node: savepoint,  Next: lock-tables,  Prev: implicit-commit,  Up: sql-syntax-transactions

13.3.4 `SAVEPOINT', `ROLLBACK TO SAVEPOINT', and `RELEASE SAVEPOINT' Syntax
---------------------------------------------------------------------------

     SAVEPOINT IDENTIFIER
     ROLLBACK [WORK] TO [SAVEPOINT] IDENTIFIER
     RELEASE SAVEPOINT IDENTIFIER

`InnoDB' supports the SQL statements *Note `SAVEPOINT': savepoint,
*Note `ROLLBACK TO SAVEPOINT': savepoint, *Note `RELEASE SAVEPOINT':
savepoint. and the optional `WORK' keyword for *Note `ROLLBACK': commit.

The *Note `SAVEPOINT': savepoint. statement sets a named transaction
savepoint with a name of IDENTIFIER. If the current transaction has a
savepoint with the same name, the old savepoint is deleted and a new
one is set.

The *Note `ROLLBACK TO SAVEPOINT': savepoint. statement rolls back a
transaction to the named savepoint without terminating the transaction.
Modifications that the current transaction made to rows after the
savepoint was set are undone in the rollback, but `InnoDB' does _not_
release the row locks that were stored in memory after the savepoint.
(For a new inserted row, the lock information is carried by the
transaction ID stored in the row; the lock is not separately stored in
memory. In this case, the row lock is released in the undo.) Savepoints
that were set at a later time than the named savepoint are deleted.

If the *Note `ROLLBACK TO SAVEPOINT': savepoint. statement returns the
following error, it means that no savepoint with the specified name
exists:

     ERROR 1305 (42000): SAVEPOINT IDENTIFIER does not exist

The *Note `RELEASE SAVEPOINT': savepoint. statement removes the named
savepoint from the set of savepoints of the current transaction. No
commit or rollback occurs. It is an error if the savepoint does not
exist.

All savepoints of the current transaction are deleted if you execute a
*Note `COMMIT': commit, or a *Note `ROLLBACK': commit. that does not
name a savepoint.

A new savepoint level is created when a stored function is invoked or a
trigger is activated. The savepoints on previous levels become
unavailable and thus do not conflict with savepoints on the new level.
When the function or trigger terminates, any savepoints it created are
released and the previous savepoint level is restored.


File: manual.info,  Node: lock-tables,  Next: set-transaction,  Prev: savepoint,  Up: sql-syntax-transactions

13.3.5 `LOCK TABLES' and `UNLOCK TABLES' Syntax
-----------------------------------------------

* Menu:

* lock-tables-and-transactions::  Interaction of Table Locking and Transactions
* lock-tables-and-triggers::     `LOCK TABLES' and Triggers
* lock-tables-restrictions::     Table-Locking Restrictions and Conditions

     LOCK TABLES
         TBL_NAME [[AS] ALIAS] LOCK_TYPE
         [, TBL_NAME [[AS] ALIAS] LOCK_TYPE] ...

     LOCK_TYPE:
         READ [LOCAL]
       | [LOW_PRIORITY] WRITE

     UNLOCK TABLES

MySQL enables client sessions to acquire table locks explicitly for the
purpose of cooperating with other sessions for access to tables, or to
prevent other sessions from modifying tables during periods when a
session requires exclusive access to them. A session can acquire or
release locks only for itself. One session cannot acquire locks for
another session or release locks held by another session.

Locks may be used to emulate transactions or to get more speed when
updating tables. This is explained in more detail later in this section.

*Note `LOCK TABLES': lock-tables. explicitly acquires table locks for
the current client session. Table locks can be acquired for base tables
or views. You must have the `LOCK TABLES' privilege, and the `SELECT'
privilege for each object to be locked.

For view locking, *Note `LOCK TABLES': lock-tables. adds all base
tables used in the view to the set of tables to be locked and locks
them automatically. If you lock a table explicitly with *Note `LOCK
TABLES': lock-tables, any tables used in triggers are also locked
implicitly, as described in *Note lock-tables-and-triggers::.

*Note `UNLOCK TABLES': lock-tables. explicitly releases any table locks
held by the current session. *Note `LOCK TABLES': lock-tables.
implicitly releases any table locks held by the current session before
acquiring new locks.

Another use for *Note `UNLOCK TABLES': lock-tables. is to release the
global read lock acquired with the *Note `FLUSH TABLES WITH READ LOCK':
flush. statement, which enables you to lock all tables in all
databases. See *Note flush::. (This is a very convenient way to get
backups if you have a file system such as Veritas that can take
snapshots in time.)

A table lock protects only against inappropriate reads or writes by
other sessions. The session holding the lock, even a read lock, can
perform table-level operations such as *Note `DROP TABLE': drop-table.
Truncate operations are not transaction-safe, so an error occurs if the
session attempts one during an active transaction or while holding a
table lock.

The following discussion applies only to non-`TEMPORARY' tables. *Note
`LOCK TABLES': lock-tables. is permitted (but ignored) for a
`TEMPORARY' table. The table can be accessed freely by the session
within which it was created, regardless of what other locking may be in
effect. No lock is necessary because no other session can see the table.

For information about other conditions on the use of *Note `LOCK
TABLES': lock-tables. and statements that cannot be used while *Note
`LOCK TABLES': lock-tables. is in effect, see *Note
lock-tables-restrictions::

*Rules for Lock Acquisition*

To acquire table locks within the current session, use the *Note `LOCK
TABLES': lock-tables. statement. The following lock types are available:

`READ [LOCAL]' lock:

   * The session that holds the lock can read the table (but not write
     it).

   * Multiple sessions can acquire a `READ' lock for the table at the
     same time.

   * Other sessions can read the table without explicitly acquiring a
     `READ' lock.

   * The `LOCAL' modifier enables nonconflicting *Note `INSERT':
     insert. statements (concurrent inserts) by other sessions to
     execute while the lock is held.  (See *Note concurrent-inserts::.)
     However, `READ LOCAL' cannot be used if you are going to
     manipulate the database using processes external to the server
     while you hold the lock. For `InnoDB' tables, `READ LOCAL' is the
     same as `READ'.

`[LOW_PRIORITY] WRITE' lock:

   * The session that holds the lock can read and write the table.

   * Only the session that holds the lock can access the table. No
     other session can access it until the lock is released.

   * Lock requests for the table by other sessions block while the
     `WRITE' lock is held.

   * The `LOW_PRIORITY' modifier has no effect as of MySQL 5.5.3.
     Before 5.5.3, it affects lock scheduling if the `WRITE' lock
     request must wait, as described later.

If the *Note `LOCK TABLES': lock-tables. statement must wait due to
locks held by other sessions on any of the tables, it blocks until all
locks can be acquired.

A session that requires locks must acquire all the locks that it needs
in a single *Note `LOCK TABLES': lock-tables.  statement. While the
locks thus obtained are held, the session can access only the locked
tables. For example, in the following sequence of statements, an error
occurs for the attempt to access `t2' because it was not locked in the
*Note `LOCK TABLES': lock-tables. statement:

     mysql> LOCK TABLES t1 READ;
     mysql> SELECT COUNT(*) FROM t1;
     +----------+
     | COUNT(*) |
     +----------+
     |        3 |
     +----------+
     mysql> SELECT COUNT(*) FROM t2;
     ERROR 1100 (HY000): Table 't2' was not locked with LOCK TABLES

Tables in the `INFORMATION_SCHEMA' database are an exception. They can
be accessed without being locked explicitly even while a session holds
table locks obtained with *Note `LOCK TABLES': lock-tables.

You cannot refer to a locked table multiple times in a single query
using the same name. Use aliases instead, and obtain a separate lock
for the table and each alias:

     mysql> LOCK TABLE t WRITE, t AS t1 READ;
     mysql> INSERT INTO t SELECT * FROM t;
     ERROR 1100: Table 't' was not locked with LOCK TABLES
     mysql> INSERT INTO t SELECT * FROM t AS t1;

The error occurs for the first *Note `INSERT': insert. because there
are two references to the same name for a locked table. The second
*Note `INSERT': insert. succeeds because the references to the table
use different names.

If your statements refer to a table by means of an alias, you must lock
the table using that same alias. It does not work to lock the table
without specifying the alias:

     mysql> LOCK TABLE t READ;
     mysql> SELECT * FROM t AS myalias;
     ERROR 1100: Table 'myalias' was not locked with LOCK TABLES

Conversely, if you lock a table using an alias, you must refer to it in
your statements using that alias:

     mysql> LOCK TABLE t AS myalias READ;
     mysql> SELECT * FROM t;
     ERROR 1100: Table 't' was not locked with LOCK TABLES
     mysql> SELECT * FROM t AS myalias;

`WRITE' locks normally have higher priority than `READ' locks to ensure
that updates are processed as soon as possible. This means that if one
session obtains a `READ' lock and then another session requests a
`WRITE' lock, subsequent `READ' lock requests wait until the session
that requested the `WRITE' lock has obtained the lock and released it.
Before MySQL 5.5.3, the `LOW_PRIORITY' modifier can be given to affect
locking behavior as follows (as of 5.5.3, it has no effect): A request
for a `LOW_PRIORITY WRITE' lock permits subsequent `READ' lock requests
by other sessions to be satisfied first if they occur while the
`LOW_PRIORITY WRITE' request is waiting. You should use `LOW_PRIORITY
WRITE' locks only if you are sure that eventually there will be a time
when no sessions have a `READ' lock. For `InnoDB' tables in
transactional mode (autocommit = 0), a waiting `LOW_PRIORITY WRITE'
lock acts like a regular `WRITE' lock and causes subsequent `READ' lock
requests to wait.

*Note `LOCK TABLES': lock-tables. acquires locks as follows:

  1. Sort all tables to be locked in an internally defined order.  From
     the user standpoint, this order is undefined.

  2. If a table is to be locked with a read and a write lock, put the
     write lock request before the read lock request.

  3. Lock one table at a time until the session gets all locks.

This policy ensures that table locking is deadlock free. There are,
however, other things you need to be aware of about this policy: If you
are using a `LOW_PRIORITY WRITE' lock for a table, it means only that
MySQL waits for this particular lock until there are no other sessions
that want a `READ' lock. When the session has gotten the `WRITE' lock
and is waiting to get the lock for the next table in the lock table
list, all other sessions wait for the `WRITE' lock to be released. If
this becomes a serious problem with your application, you should
consider converting some of your tables to transaction-safe tables.

*Note*:

`LOCK TABLES' or `UNLOCK TABLES', when applied to a partitioned table,
always locks or unlocks the entire table. See *Note
partitioning-limitations-locking::.

*Rules for Lock Release*

When the table locks held by a session are released, they are all
released at the same time. A session can release its locks explicitly,
or locks may be released implicitly under certain conditions.

   * A session can release its locks explicitly with *Note `UNLOCK
     TABLES': lock-tables.

   * If a session issues a *Note `LOCK TABLES': lock-tables. statement
     to acquire a lock while already holding locks, its existing locks
     are released implicitly before the new locks are granted.

   * If a session begins a transaction (for example, with *Note `START
     TRANSACTION': commit.), an implicit *Note `UNLOCK TABLES':
     lock-tables. is performed, which causes existing locks to be
     released. (For additional information about the interaction
     between table locking and transactions, see *Note
     lock-tables-and-transactions::.)

If the connection for a client session terminates, whether normally or
abnormally, the server implicitly releases all table locks held by the
session (transactional and nontransactional). If the client reconnects,
the locks will no longer be in effect. In addition, if the client had
an active transaction, the server rolls back the transaction upon
disconnect, and if reconnect occurs, the new session begins with
autocommit enabled. For this reason, clients may wish to disable
auto-reconnect. With auto-reconnect in effect, the client is not
notified if reconnect occurs but any table locks or current transaction
will have been lost. With auto-reconnect disabled, if the connection
drops, an error occurs for the next statement issued. The client can
detect the error and take appropriate action such as reacquiring the
locks or redoing the transaction. See *Note auto-reconnect::.

*Note*:

If you use *Note `ALTER TABLE': alter-table. on a locked table, it may
become unlocked. For example, if you attempt a second *Note `ALTER
TABLE': alter-table.  operation, the result may be an error `Table
'TBL_NAME' was not locked with LOCK TABLES'. To handle this, lock the
table again prior to the second alteration. See also *Note
alter-table-problems::.


File: manual.info,  Node: lock-tables-and-transactions,  Next: lock-tables-and-triggers,  Prev: lock-tables,  Up: lock-tables

13.3.5.1 Interaction of Table Locking and Transactions
......................................................

*Note `LOCK TABLES': lock-tables. and *Note `UNLOCK TABLES':
lock-tables. interact with the use of transactions as follows:

   * *Note `LOCK TABLES': lock-tables. is not transaction-safe and
     implicitly commits any active transaction before attempting to
     lock the tables.

   * *Note `UNLOCK TABLES': lock-tables. implicitly commits any active
     transaction, but only if *Note `LOCK TABLES': lock-tables. has
     been used to acquire table locks. For example, in the following
     set of statements, *Note `UNLOCK TABLES': lock-tables. releases
     the global read lock but does not commit the transaction because
     no table locks are in effect:

          FLUSH TABLES WITH READ LOCK;
          START TRANSACTION;
          SELECT ... ;
          UNLOCK TABLES;

   * Beginning a transaction (for example, with *Note `START
     TRANSACTION': commit.) implicitly commits any current transaction
     and releases existing table locks.

   * *Note `FLUSH TABLES WITH READ LOCK': flush. acquires a global read
     lock and not table locks, so it is not subject to the same
     behavior as *Note `LOCK TABLES': lock-tables. and *Note `UNLOCK
     TABLES': lock-tables. with respect to table locking and implicit
     commits. For example, *Note `START TRANSACTION': commit. does not
     release the global read lock.  See *Note flush::.

   * Other statements that implicitly cause transactions to be
     committed do not release existing table locks. For a list of such
     statements, see *Note implicit-commit::.

   * The correct way to use *Note `LOCK TABLES': lock-tables. and *Note
     `UNLOCK TABLES': lock-tables. with transactional tables, such as
     `InnoDB' tables, is to begin a transaction with `SET autocommit =
     0' (not *Note `START TRANSACTION': commit.) followed by *Note
     `LOCK TABLES': lock-tables, and to not call *Note `UNLOCK TABLES':
     lock-tables. until you commit the transaction explicitly. For
     example, if you need to write to table `t1' and read from table
     `t2', you can do this:

          SET autocommit=0;
          LOCK TABLES t1 WRITE, t2 READ, ...;... DO SOMETHING WITH TABLES T1 AND T2 HERE ...
          COMMIT;
          UNLOCK TABLES;

     When you call *Note `LOCK TABLES': lock-tables, `InnoDB'
     internally takes its own table lock, and MySQL takes its own table
     lock.  `InnoDB' releases its internal table lock at the next
     commit, but for MySQL to release its table lock, you have to call
     *Note `UNLOCK TABLES': lock-tables. You should not have
     `autocommit = 1', because then `InnoDB' releases its internal table
     lock immediately after the call of *Note `LOCK TABLES':
     lock-tables, and deadlocks can very easily happen.  `InnoDB' does
     not acquire the internal table lock at all if `autocommit = 1', to
     help old applications avoid unnecessary deadlocks.

   * *Note `ROLLBACK': commit.  does not release table locks.


File: manual.info,  Node: lock-tables-and-triggers,  Next: lock-tables-restrictions,  Prev: lock-tables-and-transactions,  Up: lock-tables

13.3.5.2 `LOCK TABLES' and Triggers
...................................

If you lock a table explicitly with *Note `LOCK TABLES': lock-tables,
any tables used in triggers are also locked implicitly:

   * The locks are taken as the same time as those acquired explicitly
     with the *Note `LOCK TABLES': lock-tables. statement.

   * The lock on a table used in a trigger depends on whether the table
     is used only for reading. If so, a read lock suffices.  Otherwise,
     a write lock is used.

   * If a table is locked explicitly for reading with *Note `LOCK
     TABLES': lock-tables, but needs to be locked for writing because
     it might be modified within a trigger, a write lock is taken
     rather than a read lock.  (That is, an implicit write lock needed
     due to the table's appearance within a trigger causes an explicit
     read lock request for the table to be converted to a write lock
     request.)

Suppose that you lock two tables, `t1' and `t2', using this statement:

     LOCK TABLES t1 WRITE, t2 READ;

If `t1' or `t2' have any triggers, tables used within the triggers will
also be locked.  Suppose that `t1' has a trigger defined like this:

     CREATE TRIGGER t1_a_ins AFTER INSERT ON t1 FOR EACH ROW
     BEGIN
       UPDATE t4 SET count = count+1
           WHERE id = NEW.id AND EXISTS (SELECT a FROM t3);
       INSERT INTO t2 VALUES(1, 2);
     END;

The result of the *Note `LOCK TABLES': lock-tables.  statement is that
`t1' and `t2' are locked because they appear in the statement, and `t3'
and `t4' are locked because they are used within the trigger:

   * `t1' is locked for writing per the `WRITE' lock request.

   * `t2' is locked for writing, even though the request is for a
     `READ' lock. This occurs because `t2' is inserted into within the
     trigger, so the `READ' request is converted to a `WRITE' request.

   * `t3' is locked for reading because it is only read from within the
     trigger.

   * `t4' is locked for writing because it might be updated within the
     trigger.


File: manual.info,  Node: lock-tables-restrictions,  Prev: lock-tables-and-triggers,  Up: lock-tables

13.3.5.3 Table-Locking Restrictions and Conditions
..................................................

You can safely use *Note `KILL': kill. to terminate a session that is
waiting for a table lock. See *Note kill::.

You should _not_ lock any tables that you are using with *Note `INSERT
DELAYED': insert-delayed. An *Note `INSERT DELAYED': insert-delayed. in
this case results in an error because the insert must be handled by a
separate thread, not by the session which holds the lock.

*Note `LOCK TABLES': lock-tables. and *Note `UNLOCK TABLES':
lock-tables. cannot be used within stored programs.

Tables in the `performance_schema' database cannot be locked with *Note
`LOCK TABLES': lock-tables, except the `setup_XXX' tables.

The following statements are prohibited while a *Note `LOCK TABLES':
lock-tables. statement is in effect:

   * As of MySQL 5.5.3, *Note `CREATE TABLE': create-table, *Note
     `CREATE TABLE ... LIKE': create-table, *Note `CREATE VIEW':
     create-view, *Note `DROP VIEW': drop-view, and DDL statements on
     stored procedures and functions.

   * As of MySQL 5.5.8, DDL statements on events

For some operations, system tables in the `mysql' database must be
accessed. For example, the *Note `HELP': help. statement requires the
contents of the server-side help tables, and `CONVERT_TZ()' might need
to read the time zone tables. The server implicitly locks the system
tables for reading as necessary so that you need not lock them
explicitly. These tables are treated as just described:

     mysql.help_category
     mysql.help_keyword
     mysql.help_relation
     mysql.help_topic
     mysql.proc
     mysql.time_zone
     mysql.time_zone_leap_second
     mysql.time_zone_name
     mysql.time_zone_transition
     mysql.time_zone_transition_type

If you want to explicitly place a `WRITE' lock on any of those tables
with a *Note `LOCK TABLES': lock-tables. statement, the table must be
the only one locked; no other table can be locked with the same
statement.

Normally, you do not need to lock tables, because all single *Note
`UPDATE': update. statements are atomic; no other session can interfere
with any other currently executing SQL statement. However, there are a
few cases when locking tables may provide an advantage:

   * If you are going to run many operations on a set of `MyISAM'
     tables, it is much faster to lock the tables you are going to use.
     Locking `MyISAM' tables speeds up inserting, updating, or deleting
     on them because MySQL does not flush the key cache for the locked
     tables until *Note `UNLOCK TABLES': lock-tables. is called.
     Normally, the key cache is flushed after each SQL statement.

     The downside to locking the tables is that no session can update a
     `READ'-locked table (including the one holding the lock) and no
     session can access a `WRITE'-locked table other than the one
     holding the lock.

   * If you are using tables for a nontransactional storage engine, you
     must use *Note `LOCK TABLES': lock-tables. if you want to ensure
     that no other session modifies the tables between a *Note
     `SELECT': select. and an *Note `UPDATE': update. The example shown
     here requires *Note `LOCK TABLES': lock-tables. to execute safely:

          LOCK TABLES trans READ, customer WRITE;
          SELECT SUM(value) FROM trans WHERE customer_id=SOME_ID;
          UPDATE customer
            SET total_value=SUM_FROM_PREVIOUS_STATEMENT
            WHERE customer_id=SOME_ID;
          UNLOCK TABLES;

     Without *Note `LOCK TABLES': lock-tables, it is possible that
     another session might insert a new row in the `trans' table
     between execution of the *Note `SELECT': select. and *Note
     `UPDATE': update. statements.

You can avoid using *Note `LOCK TABLES': lock-tables.  in many cases by
using relative updates (`UPDATE customer SET VALUE=VALUE+NEW_VALUE') or
the `LAST_INSERT_ID()' function.  See *Note ansi-diff-transactions::.

You can also avoid locking tables in some cases by using the user-level
advisory lock functions `GET_LOCK()' and `RELEASE_LOCK()'. These locks
are saved in a hash table in the server and implemented with
`pthread_mutex_lock()' and `pthread_mutex_unlock()' for high speed. See
*Note miscellaneous-functions::.

See *Note internal-locking::, for more information on locking policy.


File: manual.info,  Node: set-transaction,  Next: xa,  Prev: lock-tables,  Up: sql-syntax-transactions

13.3.6 `SET TRANSACTION' Syntax
-------------------------------

     SET [GLOBAL | SESSION] TRANSACTION ISOLATION LEVEL
       {
            REPEATABLE READ
          | READ COMMITTED
          | READ UNCOMMITTED
          | SERIALIZABLE
        }

This statement sets the transaction isolation level, used for
operations on *Note `InnoDB': innodb-storage-engine. tables.

* Scope of the Isolation Level *

You can set the isolation level globally, for the current session, or
for the next transaction:

   * With the `GLOBAL' keyword, the statement sets the default
     transaction level globally for all subsequent sessions. Existing
     sessions are unaffected.

   * With the `SESSION' keyword, the statement sets the default
     transaction level for all subsequent transactions performed within
     the current session.

   * Without any `SESSION' or `GLOBAL' keyword, the statement sets the
     isolation level for the next (not started) transaction performed
     within the current session.

A change to the global default isolation level requires the `SUPER'
privilege. Any session is free to change its session isolation level
(even in the middle of a transaction), or the isolation level for its
next transaction.

*Note `SET TRANSACTION ISOLATION LEVEL': set-transaction. without
`GLOBAL' or `SESSION' is not permitted while there is an active
transaction:

     mysql> START TRANSACTION;
     Query OK, 0 rows affected (0.02 sec)

     mysql> SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
     ERROR 1568 (25001): Transaction isolation level can't be changed
     while a transaction is in progress

To set the global default isolation level at server startup, use the
`--transaction-isolation=LEVEL' option to *Note `mysqld': mysqld. on
the command line or in an option file. Values of LEVEL for this option
use dashes rather than spaces, so the permissible values are
`READ-UNCOMMITTED', `READ-COMMITTED', `REPEATABLE-READ', or
`SERIALIZABLE'. For example, to set the default isolation level to
`REPEATABLE READ', use these lines in the `[mysqld]' section of an
option file:

     [mysqld]
     transaction-isolation = REPEATABLE-READ

It is possible to check or set the global and session transaction
isolation levels at runtime by using the `tx_isolation' system variable:

     SELECT @@GLOBAL.tx_isolation, @@tx_isolation;
     SET GLOBAL tx_isolation='REPEATABLE-READ';
     SET SESSION tx_isolation='SERIALIZABLE';

* Details and Usage of Isolation Levels *

`InnoDB' supports each of the transaction isolation levels described
here using different locking strategies. You can enforce a high degree
of consistency with the default `REPEATABLE READ' level, for operations
on crucial data where ACID compliance is important.  Or you can relax
the consistency rules with `READ COMMITTED' or even `READ UNCOMMITTED',
in situations such as bulk reporting where precise consistency and
repeatable results are less important than minimizing the amount of
overhead for locking. `SERIALIZABLE' enforces even stricter rules than
`REPEATABLE READ', and is used mainly in specialized situations, such
as with XA transactions and for troubleshooting issues with concurrency
and deadlocks.

For full information about how these isolation levels work with
`InnoDB' transactions, see *Note innodb-transaction-model::. In
particular, for additional information about `InnoDB' record-level
locks and how it uses them to execute various types of statements, see
*Note innodb-record-level-locks:: and *Note innodb-locks-set::.

The following list describes how MySQL supports the different
transaction levels. The list goes from the most commonly used level to
the least used.

   *  `REPEATABLE READ'

     This is the default isolation level for `InnoDB'. For consistent
     reads, there is an important difference from the `READ COMMITTED'
     isolation level: All consistent reads within the same transaction
     read the snapshot established by the first read. This convention
     means that if you issue several plain (nonlocking) *Note `SELECT':
     select. statements within the same transaction, these *Note
     `SELECT': select.  statements are consistent also with respect to
     each other. See *Note innodb-consistent-read::.

     For locking reads (*Note `SELECT': select. with `FOR UPDATE' or
     `LOCK IN SHARE MODE'), *Note `UPDATE': update, and *Note `DELETE':
     delete. statements, locking depends on whether the statement uses
     a unique index with a unique search condition, or a range-type
     search condition. For a unique index with a unique search
     condition, `InnoDB' locks only the index record found, not the gap
     before it. For other search conditions, `InnoDB' locks the index
     range scanned, using gap locks or next-key (gap plus index-record)
     locks to block insertions by other sessions into the gaps covered
     by the range.

   *  `READ COMMITTED'

     A somewhat Oracle-like isolation level with respect to consistent
     (nonlocking) reads: Each consistent read, even within the same
     transaction, sets and reads its own fresh snapshot. See *Note
     innodb-consistent-read::.

     For locking reads (*Note `SELECT': select. with `FOR UPDATE' or
     `LOCK IN SHARE MODE'), *Note `UPDATE': update. statements, and
     *Note `DELETE': delete. statements, `InnoDB' locks only index
     records, not the gaps before them, and thus permits the free
     insertion of new records next to locked records.

     *Note*:

     In MySQL 5.5, when `READ COMMITTED' isolation level is used or the
     `innodb_locks_unsafe_for_binlog' system variable is enabled, there
     is no `InnoDB' gap locking except for foreign-key constraint
     checking and duplicate-key checking. Also, record locks for
     nonmatching rows are released after MySQL has evaluated the
     `WHERE' condition.

     If you use `READ COMMITTED' or enable
     `innodb_locks_unsafe_for_binlog', you _must_ use row-based binary
     logging.

   *  `READ UNCOMMITTED'

     *Note `SELECT': select. statements are performed in a nonlocking
     fashion, but a possible earlier version of a row might be used.
     Thus, using this isolation level, such reads are not consistent.
     This is also called a `dirty read.' Otherwise, this isolation
     level works like `READ COMMITTED'.

   *  `SERIALIZABLE'

     This level is like `REPEATABLE READ', but `InnoDB' implicitly
     converts all plain *Note `SELECT': select.  statements to *Note
     `SELECT ... LOCK IN SHARE MODE': select. if autocommit is
     disabled. If autocommit is enabled, the *Note `SELECT': select. is
     its own transaction.  It therefore is known to be read only and
     can be serialized if performed as a consistent (nonlocking) read
     and need not block for other transactions. (To force a plain *Note
     `SELECT': select. to block if other transactions have modified the
     selected rows, disable autocommit.)


File: manual.info,  Node: xa,  Prev: set-transaction,  Up: sql-syntax-transactions

13.3.7 XA Transactions
----------------------

* Menu:

* xa-statements::                XA Transaction SQL Syntax
* xa-states::                    XA Transaction States

Support for XA transactions is available for the `InnoDB' storage
engine. The MySQL XA implementation is based on the X/Open CAE document
`Distributed Transaction Processing: The XA Specification'. This
document is published by The Open Group and available at
`http://www.opengroup.org/public/pubs/catalog/c193.htm'.  Limitations
of the current XA implementation are described in *Note
xa-restrictions::.

On the client side, there are no special requirements. The XA interface
to a MySQL server consists of SQL statements that begin with the `XA'
keyword. MySQL client programs must be able to send SQL statements and
to understand the semantics of the XA statement interface. They do not
need be linked against a recent client library. Older client libraries
also will work.

Currently, among the MySQL Connectors, MySQL Connector/J 5.0.0 supports
XA directly (by means of a class interface that handles the Xan SQL
statement interface for you).

XA supports distributed transactions, that is, the ability to permit
multiple separate transactional resources to participate in a global
transaction. Transactional resources often are RDBMSs but may be other
kinds of resources.

A global transaction involves several actions that are transactional in
themselves, but that all must either complete successfully as a group,
or all be rolled back as a group. In essence, this extends ACID
properties `up a level' so that multiple ACID transactions can be
executed in concert as components of a global operation that also has
ACID properties.  (However, for a distributed transaction, you must use
the `SERIALIZABLE' isolation level to achieve ACID properties. It is
enough to use `REPEATABLE READ' for a nondistributed transaction, but
not for a distributed transaction.)

Some examples of distributed transactions:

   * An application may act as an integration tool that combines a
     messaging service with an RDBMS. The application makes sure that
     transactions dealing with message sending, retrieval, and
     processing that also involve a transactional database all happen
     in a global transaction. You can think of this as `transactional
     email.'

   * An application performs actions that involve different database
     servers, such as a MySQL server and an Oracle server (or multiple
     MySQL servers), where actions that involve multiple servers must
     happen as part of a global transaction, rather than as separate
     transactions local to each server.

   * A bank keeps account information in an RDBMS and distributes and
     receives money through automated teller machines (ATMs).  It is
     necessary to ensure that ATM actions are correctly reflected in
     the accounts, but this cannot be done with the RDBMS alone. A
     global transaction manager integrates the ATM and database
     resources to ensure overall consistency of financial transactions.

Applications that use global transactions involve one or more Resource
Managers and a Transaction Manager:

   * A Resource Manager (RM) provides access to transactional
     resources. A database server is one kind of resource manager.  It
     must be possible to either commit or roll back transactions
     managed by the RM.

   * A Transaction Manager (TM) coordinates the transactions that are
     part of a global transaction. It communicates with the RMs that
     handle each of these transactions. The individual transactions
     within a global transaction are `branches' of the global
     transaction. Global transactions and their branches are identified
     by a naming scheme described later.

The MySQL implementation of XA MySQL enables a MySQL server to act as a
Resource Manager that handles XA transactions within a global
transaction. A client program that connects to the MySQL server acts as
the Transaction Manager.

To carry out a global transaction, it is necessary to know which
components are involved, and bring each component to a point when it
can be committed or rolled back. Depending on what each component
reports about its ability to succeed, they must all commit or roll back
as an atomic group. That is, either all components must commit, or all
components must roll back. To manage a global transaction, it is
necessary to take into account that any component or the connecting
network might fail.

The process for executing a global transaction uses two-phase commit
(2PC). This takes place after the actions performed by the branches of
the global transaction have been executed.

  1. In the first phase, all branches are prepared. That is, they are
     told by the TM to get ready to commit. Typically, this means each
     RM that manages a branch records the actions for the branch in
     stable storage. The branches indicate whether they are able to do
     this, and these results are used for the second phase.

  2. In the second phase, the TM tells the RMs whether to commit or
     roll back. If all branches indicated when they were prepared that
     they will be able to commit, all branches are told to commit. If
     any branch indicated when it was prepared that it will not be able
     to commit, all branches are told to roll back.

In some cases, a global transaction might use one-phase commit (1PC).
For example, when a Transaction Manager finds that a global transaction
consists of only one transactional resource (that is, a single branch),
that resource can be told to prepare and commit at the same time.


File: manual.info,  Node: xa-statements,  Next: xa-states,  Prev: xa,  Up: xa

13.3.7.1 XA Transaction SQL Syntax
..................................

To perform XA transactions in MySQL, use the following statements:

     XA {START|BEGIN} XID [JOIN|RESUME]

     XA END XID [SUSPEND [FOR MIGRATE]]

     XA PREPARE XID

     XA COMMIT XID [ONE PHASE]

     XA ROLLBACK XID

     XA RECOVER

For *Note `XA START': xa-statements, the `JOIN' and `RESUME' clauses
are not supported.

For *Note `XA END': xa-statements. the `SUSPEND [FOR MIGRATE]' clause
is not supported.

Each XA statement begins with the `XA' keyword, and most of them
require an XID value. An XID is an XA transaction identifier. It
indicates which transaction the statement applies to. XID values are
supplied by the client, or generated by the MySQL server. An XID value
has from one to three parts:

     XID: GTRID [, BQUAL [, FORMATID ]]

GTRID is a global transaction identifier, BQUAL is a branch qualifier,
and FORMATID is a number that identifies the format used by the GTRID
and BQUAL values. As indicated by the syntax, BQUAL and FORMATID are
optional. The default BQUAL value is `''' if not given. The default
FORMATID value is 1 if not given.

GTRID and BQUAL must be string literals, each up to 64 bytes (not
characters) long.  GTRID and BQUAL can be specified in several ways.
You can use a quoted string (`'ab''), hex string (`0x6162', `X'ab''), or
bit value (`b'NNNN'').

FORMATID is an unsigned integer.

The GTRID and BQUAL values are interpreted in bytes by the MySQL
server's underlying XA support routines. However, while an SQL
statement containing an XA statement is being parsed, the server works
with some specific character set. To be safe, write GTRID and BQUAL as
hex strings.

XID values typically are generated by the Transaction Manager. Values
generated by one TM must be different from values generated by other
TMs. A given TM must be able to recognize its own XID values in a list
of values returned by the *Note `XA RECOVER': xa-statements. statement.

`XA START XID' starts an XA transaction with the given XID value. Each
XA transaction must have a unique XID value, so the value must not
currently be used by another XA transaction. Uniqueness is assessed
using the GTRID and BQUAL values. All following XA statements for the
XA transaction must be specified using the same XID value as that given
in the *Note `XA START': xa-statements. statement. If you use any of
those statements but specify an XID value that does not correspond to
some existing XA transaction, an error occurs.

One or more XA transactions can be part of the same global transaction.
All XA transactions within a given global transaction must use the same
GTRID value in the XID value. For this reason, GTRID values must be
globally unique so that there is no ambiguity about which global
transaction a given XA transaction is part of. The BQUAL part of the
XID value must be different for each XA transaction within a global
transaction. (The requirement that BQUAL values be different is a
limitation of the current MySQL XA implementation. It is not part of
the XA specification.)

The *Note `XA RECOVER': xa-statements. statement returns information
for those XA transactions on the MySQL server that are in the
`PREPARED' state. (See *Note xa-states::.) The output includes a row
for each such XA transaction on the server, regardless of which client
started it.

*Note `XA RECOVER': xa-statements. output rows look like this (for an
example XID value consisting of the parts `'abc'', `'def'', and `7'):

     mysql> XA RECOVER;
     +----------+--------------+--------------+--------+
     | formatID | gtrid_length | bqual_length | data   |
     +----------+--------------+--------------+--------+
     |        7 |            3 |            3 | abcdef |
     +----------+--------------+--------------+--------+

The output columns have the following meanings:

   * `formatID' is the FORMATID part of the transaction XID

   * `gtrid_length' is the length in bytes of the GTRID part of the XID

   * `bqual_length' is the length in bytes of the BQUAL part of the XID

   * `data' is the concatenation of the GTRID and BQUAL parts of the XID


File: manual.info,  Node: xa-states,  Prev: xa-statements,  Up: xa

13.3.7.2 XA Transaction States
..............................

An XA transaction progresses through the following states:

  1. Use *Note `XA START': xa-statements. to start an XA transaction
     and put it in the `ACTIVE' state.

  2. For an `ACTIVE' XA transaction, issue the SQL statements that make
     up the transaction, and then issue an *Note `XA END':
     xa-statements. statement.  *Note `XA END': xa-statements. puts the
     transaction in the `IDLE' state.

  3. For an `IDLE' XA transaction, you can issue either an *Note `XA
     PREPARE': xa-statements. statement or an `XA COMMIT ... ONE PHASE'
     statement:

        * *Note `XA PREPARE': xa-statements. puts the transaction in the
          `PREPARED' state. An *Note `XA RECOVER': xa-statements.
          statement at this point will include the transaction's XID
          value in its output, because *Note `XA RECOVER':
          xa-statements. lists all XA transactions that are in the
          `PREPARED' state.

        * `XA COMMIT ... ONE PHASE' prepares and commits the
          transaction. The XID value will not be listed by *Note `XA
          RECOVER': xa-statements. because the transaction terminates.

  4. For a `PREPARED' XA transaction, you can issue an *Note `XA
     COMMIT': xa-statements. statement to commit and terminate the
     transaction, or *Note `XA ROLLBACK': xa-statements. to roll back
     and terminate the transaction.

Here is a simple XA transaction that inserts a row into a table as part
of a global transaction:

     mysql> XA START 'xatest';
     Query OK, 0 rows affected (0.00 sec)

     mysql> INSERT INTO mytable (i) VALUES(10);
     Query OK, 1 row affected (0.04 sec)

     mysql> XA END 'xatest';
     Query OK, 0 rows affected (0.00 sec)

     mysql> XA PREPARE 'xatest';
     Query OK, 0 rows affected (0.00 sec)

     mysql> XA COMMIT 'xatest';
     Query OK, 0 rows affected (0.00 sec)

Within the context of a given client connection, XA transactions and
local (non-XA) transactions are mutually exclusive. For example, if
*Note `XA START': xa-statements. has been issued to begin an XA
transaction, a local transaction cannot be started until the XA
transaction has been committed or rolled back. Conversely, if a local
transaction has been started with *Note `START TRANSACTION': commit, no
XA statements can be used until the transaction has been committed or
rolled back.

Note that if an XA transaction is in the `ACTIVE' state, you cannot
issue any statements that cause an implicit commit. That would violate
the XA contract because you could not roll back the XA transaction. You
will receive the following error if you try to execute such a statement:

     ERROR 1399 (XAE07): XAER_RMFAIL: The command cannot be executed
     when global transaction is in the ACTIVE state

Statements to which the preceding remark applies are listed at *Note
implicit-commit::.


File: manual.info,  Node: sql-syntax-replication,  Next: sql-syntax-prepared-statements,  Prev: sql-syntax-transactions,  Up: sql-syntax

13.4 Replication Statements
===========================

* Menu:

* replication-master-sql::       SQL Statements for Controlling Master Servers
* replication-slave-sql::        SQL Statements for Controlling Slave Servers

Replication can be controlled through the SQL interface using the
statements described in this section. One group of statements controls
master servers, the other controls slave servers.


File: manual.info,  Node: replication-master-sql,  Next: replication-slave-sql,  Prev: sql-syntax-replication,  Up: sql-syntax-replication

13.4.1 SQL Statements for Controlling Master Servers
----------------------------------------------------

* Menu:

* purge-binary-logs::            `PURGE BINARY LOGS' Syntax
* reset-master::                 `RESET MASTER' Syntax
* set-sql-log-bin::              `SET sql_log_bin' Syntax

This section discusses statements for managing master replication
servers. *Note replication-slave-sql::, discusses statements for
managing slave servers.

In addition to the statements described here, the following *Note
`SHOW': show. statements are used with master servers in replication.
For information about these statements, see *Note show::.

   * *Note `SHOW BINARY LOGS': show-binary-logs.

   * *Note `SHOW BINLOG EVENTS': show-binlog-events.

   * *Note `SHOW MASTER STATUS': show-master-status.

   * *Note `SHOW SLAVE HOSTS': show-slave-hosts.


File: manual.info,  Node: purge-binary-logs,  Next: reset-master,  Prev: replication-master-sql,  Up: replication-master-sql

13.4.1.1 `PURGE BINARY LOGS' Syntax
...................................

     PURGE { BINARY | MASTER } LOGS
         { TO 'LOG_NAME' | BEFORE DATETIME_EXPR }

The binary log is a set of files that contain information about data
modifications made by the MySQL server. The log consists of a set of
binary log files, plus an index file (see *Note binary-log::).

The *Note `PURGE BINARY LOGS': purge-binary-logs. statement deletes all
the binary log files listed in the log index file prior to the
specified log file name or date.  `BINARY' and `MASTER' are synonyms.
Deleted log files also are removed from the list recorded in the index
file, so that the given log file becomes the first in the list.

This statement has no effect if the server was not started with the
`--log-bin' option to enable binary logging.

Examples:

     PURGE BINARY LOGS TO 'mysql-bin.010';
     PURGE BINARY LOGS BEFORE '2008-04-02 22:46:26';

The `BEFORE' variant's DATETIME_EXPR argument should evaluate to a
*Note `DATETIME': datetime. value (a value in `'YYYY-MM-DD hh:mm:ss''
format).

This statement is safe to run while slaves are replicating. You need
not stop them. If you have an active slave that currently is reading
one of the log files you are trying to delete, this statement does
nothing and fails with an error. However, if a slave is not connected
and you happen to purge one of the log files it has yet to read, the
slave will be unable to replicate after it reconnects.

To safely purge binary log files, follow this procedure:

  1. On each slave server, use *Note `SHOW SLAVE STATUS':
     show-slave-status. to check which log file it is reading.

  2. Obtain a listing of the binary log files on the master server with
     *Note `SHOW BINARY LOGS': show-binary-logs.

  3. Determine the earliest log file among all the slaves. This is the
     target file. If all the slaves are up to date, this is the last
     log file on the list.

  4. Make a backup of all the log files you are about to delete.  (This
     step is optional, but always advisable.)

  5. Purge all log files up to but not including the target file.

You can also set the `expire_logs_days' system variable to expire
binary log files automatically after a given number of days (see *Note
server-system-variables::).  If you are using replication, you should
set the variable no lower than the maximum number of days your slaves
might lag behind the master.

`PURGE BINARY LOGS TO' and `PURGE BINARY LOGS BEFORE' both fail with an
error when binary log files listed in the `.index' file had been
removed from the system by some other means (such as using `rm' on
Linux). (Bug #18199, Bug #18453) To handle such errors, edit the
`.index' file (which is a simple text file) manually to ensure that it
lists only the binary log files that are actually present, then run
again the *Note `PURGE BINARY LOGS': purge-binary-logs.  statement that
failed.


File: manual.info,  Node: reset-master,  Next: set-sql-log-bin,  Prev: purge-binary-logs,  Up: replication-master-sql

13.4.1.2 `RESET MASTER' Syntax
..............................

     RESET MASTER

Deletes all binary log files listed in the index file, resets the
binary log index file to be empty, and creates a new binary log file.
This statement is intended to be used only when the master is started
for the first time.

*Important*:

The effects of *Note `RESET MASTER': reset-master.  differ from those
of *Note `PURGE BINARY LOGS': purge-binary-logs. in 2 key ways:

  1. *Note `RESET MASTER': reset-master. removes _all_ binary log files
     that are listed in the index file, leaving only a single, empty
     binary log file with a numeric suffix of `.000001', whereas the
     numbering is not reset by *Note `PURGE BINARY LOGS':
     purge-binary-logs.

  2. *Note `RESET MASTER': reset-master. is _not_ intended to be used
     while any replication slaves are running. The behavior of *Note
     `RESET MASTER': reset-master. when used while slaves are running
     is undefined (and thus unsupported), whereas *Note `PURGE BINARY
     LOGS': purge-binary-logs. may be safely used while replication
     slaves are running.

See also *Note purge-binary-logs::.

*Note `RESET MASTER': reset-master. can prove useful when you first set
up the master and the slave, so that you can verify the setup as
follows:

  1. Start the master and slave, and start replication (see *Note
     replication-howto::).

  2. Execute a few test queries on the master.

  3. Check that the queries were replicated to the slave.

  4. When replication is running correctly, issue *Note `STOP SLAVE':
     stop-slave. followed by *Note `RESET SLAVE': reset-slave. on the
     slave, then verify that any unwanted data no longer exists on the
     slave.

  5. Issue *Note `RESET MASTER': reset-master. on the master to clean
     up the test queries.

After verifying the setup and getting rid of any unwanted and log files
generated by testing, you can start the slave and begin replicating.


File: manual.info,  Node: set-sql-log-bin,  Prev: reset-master,  Up: replication-master-sql

13.4.1.3 `SET sql_log_bin' Syntax
.................................

     SET sql_log_bin = {0|1}

The `sql_log_bin' variable controls whether logging to the binary log
is done. The default value is 1 (do logging). To change logging for the
current session, change the session value of this variable. The session
user must have the `SUPER' privilege to set this variable.

Beginning with MySQL 5.5.5, it is no longer possible to set
`@@session.sql_log_bin' within a transaction or subquery. (Bug #53437)


File: manual.info,  Node: replication-slave-sql,  Prev: replication-master-sql,  Up: sql-syntax-replication

13.4.2 SQL Statements for Controlling Slave Servers
---------------------------------------------------

* Menu:

* change-master-to::             `CHANGE MASTER TO' Syntax
* master-pos-wait::              `MASTER_POS_WAIT()' Syntax
* reset-slave::                  `RESET SLAVE' Syntax
* set-global-sql-slave-skip-counter::  `SET GLOBAL sql_slave_skip_counter' Syntax
* start-slave::                  `START SLAVE' Syntax
* stop-slave::                   `STOP SLAVE' Syntax

This section discusses statements for managing slave replication
servers. *Note replication-master-sql::, discusses statements for
managing master servers.

In addition to the statements described here, *Note `SHOW SLAVE
STATUS': show-slave-status. and *Note `SHOW RELAYLOG EVENTS':
show-relaylog-events. are also used with replication slaves. For
information about these statements, see *Note show-slave-status::, and
*Note show-relaylog-events::.


File: manual.info,  Node: change-master-to,  Next: master-pos-wait,  Prev: replication-slave-sql,  Up: replication-slave-sql

13.4.2.1 `CHANGE MASTER TO' Syntax
..................................

     CHANGE MASTER TO OPTION [, OPTION] ...

     OPTION:
         MASTER_BIND = 'INTERFACE_NAME'
       | MASTER_HOST = 'HOST_NAME'
       | MASTER_USER = 'USER_NAME'
       | MASTER_PASSWORD = 'PASSWORD'
       | MASTER_PORT = PORT_NUM
       | MASTER_CONNECT_RETRY = INTERVAL
       | MASTER_HEARTBEAT_PERIOD = INTERVAL
       | MASTER_LOG_FILE = 'MASTER_LOG_NAME'
       | MASTER_LOG_POS = MASTER_LOG_POS
       | RELAY_LOG_FILE = 'RELAY_LOG_NAME'
       | RELAY_LOG_POS = RELAY_LOG_POS
       | MASTER_SSL = {0|1}
       | MASTER_SSL_CA = 'CA_FILE_NAME'
       | MASTER_SSL_CAPATH = 'CA_DIRECTORY_NAME'
       | MASTER_SSL_CERT = 'CERT_FILE_NAME'
       | MASTER_SSL_KEY = 'KEY_FILE_NAME'
       | MASTER_SSL_CIPHER = 'CIPHER_LIST'
       | MASTER_SSL_VERIFY_SERVER_CERT = {0|1}
       | IGNORE_SERVER_IDS = (SERVER_ID_LIST)

     SERVER_ID_LIST:
         [SERVER_ID [, SERVER_ID] ... ]

*Note `CHANGE MASTER TO': change-master-to. changes the parameters that
the slave server uses for connecting to the master server, for reading
the master binary log, and reading the slave relay log. It also updates
the contents of the `master.info' and `relay-log.info' files. To use
*Note `CHANGE MASTER TO': change-master-to, the slave replication
threads must be stopped (use *Note `STOP SLAVE': stop-slave. if
necessary).

Options not specified retain their value, except as indicated in the
following discussion. Thus, in most cases, there is no need to specify
options that do not change. For example, if the password to connect to
your MySQL master has changed, you just need to issue these statements
to tell the slave about the new password:

     STOP SLAVE; -- if replication was running
     CHANGE MASTER TO MASTER_PASSWORD='new3cret';
     START SLAVE; -- if you want to restart replication

`MASTER_HOST', `MASTER_USER', `MASTER_PASSWORD', and `MASTER_PORT'
provide information to the slave about how to connect to its master:

   * `MASTER_HOST' and `MASTER_PORT' are the host name (or IP address)
     of the master host and its TCP/IP port.

     *Note*:

     Replication cannot use Unix socket files. You must be able to
     connect to the master MySQL server using TCP/IP.

     If you specify the `MASTER_HOST' or `MASTER_PORT' option, the
     slave assumes that the master server is different from before
     (even if the option value is the same as its current value.) In
     this case, the old values for the master binary log file name and
     position are considered no longer applicable, so if you do not
     specify `MASTER_LOG_FILE' and `MASTER_LOG_POS' in the statement,
     `MASTER_LOG_FILE=''' and `MASTER_LOG_POS=4' are silently appended
     to it.

     Setting `MASTER_HOST=''' (that is, setting its value explicitly to
     an empty string) is _not_ the same as not setting `MASTER_HOST' at
     all. Beginning with MySQL 5.5, trying to set `MASTER_HOST' to an
     empty string fails with an error. Previously, setting
     `MASTER_HOST' to an empty string caused *Note `START SLAVE':
     start-slave. subsequently to fail. (Bug #28796)

   * `MASTER_USER' and `MASTER_PASSWORD' are the user name and password
     of the account to use for connecting to the master.

     In MySQL 5.5.20 and later, `MASTER_USER' cannot be made empty;
     setting `MASTER_USER = ''' or leaving it unset when setting a
     value for for `MASTER_PASSWORD' causes an error (Bug #13427949).

     Currently, a password used for a replication slave account is
     effectively limited to 32 characters in length; the password can
     be longer, but any excess characters are truncated. This is not
     due to any limit imposed by the MySQL Server generally, but rather
     is an issue specific to MySQL Replication. (For more information,
     see Bug #43439.)

     The text of a running *Note `CHANGE MASTER TO': change-master-to.
     statement, including values for `MASTER_USER' and
     `MASTER_PASSWORD', can be seen in the output of a concurrent *Note
     `SHOW PROCESSLIST': show-processlist. statement.

The `MASTER_SSL_XXX' options provide information about using SSL for
the connection.  They correspond to the `--ssl-XXX' options described
in *Note ssl-options::, and *Note replication-solutions-ssl::. These
options can be changed even on slaves that are compiled without SSL
support.  They are saved to the `master.info' file, but are ignored if
the slave does not have SSL support enabled.

`MASTER_CONNECT_RETRY' specifies how many seconds to wait between
connect retries. The default is 60. The _number_ of reconnection
attempts is limited by the `--master-retry-count' server option; for
more information, see *Note replication-options::.

The `MASTER_BIND' option is available in MySQL Cluster NDB 7.2 and
later, but is not supported in mainline MySQL 5.5.

`MASTER_BIND' is for use on replication slaves having multiple network
interfaces, and determines which of the slave's network interfaces is
chosen for connecting to the master.

`MASTER_HEARTBEAT_PERIOD' sets the interval in seconds between
replication heartbeats. Whenever the master's binary log is updated
with an event, the waiting period for the next heartbeat is reset.
INTERVAL is a decimal value having the range 0 to 4294967 seconds and a
resolution in milliseconds; the smallest nonzero value is 0.001.
Heartbeats are sent by the master only if there are no unsent events in
the binary log file for a period longer than INTERVAL.

Setting INTERVAL to 0 disables heartbeats altogether. The default value
for INTERVAL is equal to the value of `slave_net_timeout' divided by 2.

Setting `@@global.slave_net_timeout' to a value less than that of the
current heartbeat interval results in a warning being issued. The
effect of issuing *Note `RESET SLAVE': reset-slave. on the heartbeat
interval is to reset it to the default value.

`MASTER_LOG_FILE' and `MASTER_LOG_POS' are the coordinates at which the
slave I/O thread should begin reading from the master the next time the
thread starts. `RELAY_LOG_FILE' and `RELAY_LOG_POS' are the coordinates
at which the slave SQL thread should begin reading from the relay log
the next time the thread starts. If you specify either of
`MASTER_LOG_FILE' or `MASTER_LOG_POS', you cannot specify
`RELAY_LOG_FILE' or `RELAY_LOG_POS'. If neither of `MASTER_LOG_FILE' or
`MASTER_LOG_POS' is specified, the slave uses the last coordinates of
the _slave SQL thread_ before *Note `CHANGE MASTER TO':
change-master-to. was issued. This ensures that there is no
discontinuity in replication, even if the slave SQL thread was late
compared to the slave I/O thread, when you merely want to change, say,
the password to use.

*Note `CHANGE MASTER TO': change-master-to.  _deletes all relay log
files_ and starts a new one, unless you specify `RELAY_LOG_FILE' or
`RELAY_LOG_POS'. In that case, relay log files are kept; the
`relay_log_purge' global variable is set silently to 0.

Prior to MySQL 5.5, `RELAY_LOG_FILE' required an absolute path. In
MySQL 5.5, the path can be relative, in which case the path is assumed
to be relative to the slave's data directory. (Bug #12190)

`IGNORE_SERVER_IDS' was added in MySQL 5.5.  This option takes a
comma-separated list of 0 or more server IDs. Events originating from
the corresponding servers are ignored, with the exception of log
rotation and deletion events, which are still recorded in the relay log.

In circular replication, the originating server normally acts as the
terminator of its own events, so that they are not applied more than
once. Thus, this option is useful in circular replication when one of
the servers in the circle is removed.  Suppose that you have a circular
replication setup with 4 servers, having server IDs 1, 2, 3, and 4, and
server 3 fails.  When bridging the gap by starting replication from
server 2 to server 4, you can include `IGNORE_SERVER_IDS = (3)' in the
`CHANGE MASTER TO' statement that you issue on server 4 to tell it to
use server 2 as its master instead of server 3. Doing so causes it to
ignore and not to propagate any statements that originated with the
server that is no longer in use.

If a `CHANGE MASTER TO' statement is issued without any
`IGNORE_SERVER_IDS' option, any existing list is preserved; *Note
`RESET SLAVE': reset-slave. also has no effect on the server ID list. To
clear the list of ignored servers, it is necessary to use the option
with an empty list:

     CHANGE MASTER TO IGNORE_SERVER_IDS = ();

If `IGNORE_SERVER_IDS' contains the server's own ID and the server was
started with the `--replicate-same-server-id' option enabled, an error
results.

Also beginning with MySQL 5.5, the `master.info' file and the output of
*Note `SHOW SLAVE STATUS': show-slave-status. are extended to provide
the list of servers that are currently ignored. For more information,
see *Note slave-logs-status::, and *Note show-slave-status::.

Beginning with MySQL 5.5.5, invoking *Note `CHANGE MASTER TO':
change-master-to. causes the previous values for `MASTER_HOST',
`MASTER_PORT', `MASTER_LOG_FILE', and `MASTER_LOG_POS' to be written to
the error log, along with other information about the slave's state
prior to execution.

*Note `CHANGE MASTER TO': change-master-to. is useful for setting up a
slave when you have the snapshot of the master and have recorded the
master binary log coordinates corresponding to the time of the
snapshot. After loading the snapshot into the slave to synchronize it
to the slave, you can run `CHANGE MASTER TO MASTER_LOG_FILE='LOG_NAME',
MASTER_LOG_POS=LOG_POS' on the slave to specify the coordinates at
which the slave should begin reading the master binary log.

The following example changes the master server the slave uses and
establishes the master binary log coordinates from which the slave
begins reading. This is used when you want to set up the slave to
replicate the master:

     CHANGE MASTER TO
       MASTER_HOST='master2.mycompany.com',
       MASTER_USER='replication',
       MASTER_PASSWORD='bigs3cret',
       MASTER_PORT=3306,
       MASTER_LOG_FILE='master2-bin.001',
       MASTER_LOG_POS=4,
       MASTER_CONNECT_RETRY=10;

The next example shows an operation that is less frequently employed.
It is used when the slave has relay log files that you want it to
execute again for some reason. To do this, the master need not be
reachable. You need only use *Note `CHANGE MASTER TO':
change-master-to. and start the SQL thread (`START SLAVE SQL_THREAD'):

     CHANGE MASTER TO
       RELAY_LOG_FILE='slave-relay-bin.006',
       RELAY_LOG_POS=4025;

You can even use the second operation in a nonreplication setup with a
standalone, nonslave server for recovery following a crash. Suppose
that your server has crashed and you have restored it from a backup.
You want to replay the server's own binary log files (not relay log
files, but regular binary log files), named (for example)
`myhost-bin.*'.  First, make a backup copy of these binary log files in
some safe place, in case you don't exactly follow the procedure below
and accidentally have the server purge the binary log. Use `SET GLOBAL
relay_log_purge=0' for additional safety. Then start the server without
the `--log-bin' option, Instead, use the `--replicate-same-server-id',
`--relay-log=myhost-bin' (to make the server believe that these regular
binary log files are relay log files) and `--skip-slave-start' options.
After the server starts, issue these statements:

     CHANGE MASTER TO
       RELAY_LOG_FILE='myhost-bin.153',
       RELAY_LOG_POS=410,
       MASTER_HOST='some_dummy_string';
     START SLAVE SQL_THREAD;

The server reads and executes its own binary log files, thus achieving
crash recovery. Once the recovery is finished, run *Note `STOP SLAVE':
stop-slave, shut down the server, delete the `master.info' and
`relay-log.info' files, and restart the server with its original
options.

Specifying the `MASTER_HOST' option (even with a dummy value) is
required to make the server think it is a slave.

The following table shows the maximum permissible length for the
string-valued options.

This table shows the maximum permissible length for `MASTER_POS_WAIT()'
string-valued options.

Option         Maximum Length
`MASTER_HOST'  60
`MASTER_USER'  16
`MASTER_PASSWORD'32
`MASTER_LOG_FILE'255
`RELAY_LOG_FILE'255
`MASTER_SSL_CA'255
`MASTER_SSL_CAPATH'255
`MASTER_SSL_CERT'255
`MASTER_SSL_KEY'255
`MASTER_SSL_CIPHER'511


File: manual.info,  Node: master-pos-wait,  Next: reset-slave,  Prev: change-master-to,  Up: replication-slave-sql

13.4.2.2 `MASTER_POS_WAIT()' Syntax
...................................

     SELECT MASTER_POS_WAIT('MASTER_LOG_FILE', MASTER_LOG_POS [, TIMEOUT])

This is actually a function, not a statement. It is used to ensure that
the slave has read and executed events up to a given position in the
master's binary log. See *Note miscellaneous-functions::, for a full
description.


File: manual.info,  Node: reset-slave,  Next: set-global-sql-slave-skip-counter,  Prev: master-pos-wait,  Up: replication-slave-sql

13.4.2.3 `RESET SLAVE' Syntax
.............................

     RESET SLAVE [ALL]

*Note `RESET SLAVE': reset-slave. makes the slave forget its
replication position in the master's binary log. This statement is
meant to be used for a clean start: It deletes the `master.info' and
`relay-log.info' files, all the relay log files, and starts a new relay
log file. To use *Note `RESET SLAVE': reset-slave, the slave
replication threads must be stopped (use *Note `STOP SLAVE':
stop-slave. if necessary).

*Note*:

All relay log files are deleted, even if they have not been completely
executed by the slave SQL thread. (This is a condition likely to exist
on a replication slave if you have issued a *Note `STOP SLAVE':
stop-slave. statement or if the slave is highly loaded.)

In MySQL 5.5 (unlike the case in MySQL 5.1 and earlier), *Note `RESET
SLAVE': reset-slave. does not change any replication connection
parameters such as master host, master port, master user, or master
password, which are retained in memory. This means that *Note `START
SLAVE': start-slave. can be issued without requiring a *Note `CHANGE
MASTER TO': change-master-to. statement following *Note `RESET SLAVE':
reset-slave.

Connection parameters are reset if the slave *Note `mysqld': mysqld. is
shut down following `RESET SLAVE'. In MySQL 5.5.16 and later, you can
instead use `RESET SLAVE ALL' to reset these connection parameters (Bug
#11809016).

If the slave SQL thread was in the middle of replicating temporary
tables when it was stopped, and *Note `RESET SLAVE': reset-slave. is
issued, these replicated temporary tables are deleted on the slave.


File: manual.info,  Node: set-global-sql-slave-skip-counter,  Next: start-slave,  Prev: reset-slave,  Up: replication-slave-sql

13.4.2.4 `SET GLOBAL sql_slave_skip_counter' Syntax
...................................................

     SET GLOBAL sql_slave_skip_counter = N

This statement skips the next N events from the master. This is useful
for recovering from replication stops caused by a statement.

This statement is valid only when the slave threads are not running.
Otherwise, it produces an error.

When using this statement, it is important to understand that the
binary log is actually organized as a sequence of groups known as
_event groups_. Each event group consists of a sequence of events.

   * For transactional tables, an event group corresponds to a
     transaction.

   * For nontransactional tables, an event group corresponds to a
     single SQL statement.

*Note*:

A single transaction can contain changes to both transactional and
nontransactional tables.

When you use *Note `SET GLOBAL sql_slave_skip_counter':
set-global-sql-slave-skip-counter. to skip events and the result is in
the middle of a group, the slave continues to skip events until it
reaches the end of the group. Execution then starts with the next event
group.

Beginning with MySQL 5.5.5, issuing this statement causes the previous
values of `RELAY_LOG_FILE', `RELAY_LOG_POS', and
`sql_slave_skip_counter' to be written to the error log.


File: manual.info,  Node: start-slave,  Next: stop-slave,  Prev: set-global-sql-slave-skip-counter,  Up: replication-slave-sql

13.4.2.5 `START SLAVE' Syntax
.............................

     START SLAVE [THREAD_TYPES]

     START SLAVE [SQL_THREAD] UNTIL
         MASTER_LOG_FILE = 'LOG_NAME', MASTER_LOG_POS = LOG_POS

     START SLAVE [SQL_THREAD] UNTIL
         RELAY_LOG_FILE = 'LOG_NAME', RELAY_LOG_POS = LOG_POS

     THREAD_TYPES:
         [THREAD_TYPE [, THREAD_TYPE] ... ]

     THREAD_TYPE: IO_THREAD | SQL_THREAD

*Note `START SLAVE': start-slave. with no THREAD_TYPE options starts
both of the slave threads. The I/O thread reads events from the master
server and stores them in the relay log. The SQL thread reads events
from the relay log and executes them.  *Note `START SLAVE':
start-slave. requires the `SUPER' privilege.

If *Note `START SLAVE': start-slave. succeeds in starting the slave
threads, it returns without any error.  However, even in that case, it
might be that the slave threads start and then later stop (for example,
because they do not manage to connect to the master or read its binary
log, or some other problem). *Note `START SLAVE': start-slave. does not
warn you about this. You must check the slave's error log for error
messages generated by the slave threads, or check that they are running
satisfactorily with *Note `SHOW SLAVE STATUS': show-slave-status.

*Note `START SLAVE': start-slave. sends an acknowledgment to the user
after both the I/O thread and the SQL thread have started. However, the
I/O thread may not yet have connected. For this reason, a successful
*Note `START SLAVE': start-slave. causes *Note `SHOW SLAVE STATUS':
show-slave-status. to show `Slave_SQL_Running=Yes', but this does not
guarantee that `Slave_IO_Running=Yes' (because `Slave_IO_Running=Yes'
only if the I/O thread is running _and connected_). For more
information, see *Note show-slave-status::, and *Note
replication-administration-status::.

You can add `IO_THREAD' and `SQL_THREAD' options to the statement to
name which of the threads to start.

An `UNTIL' clause may be added to specify that the slave should start
and run until the SQL thread reaches a given point in the master binary
log or in the slave relay log.  When the SQL thread reaches that point,
it stops. If the `SQL_THREAD' option is specified in the statement, it
starts only the SQL thread. Otherwise, it starts both slave threads. If
the SQL thread is running, the `UNTIL' clause is ignored and a warning
is issued.

For an `UNTIL' clause, you must specify both a log file name and
position. Do not mix master and relay log options.

Any `UNTIL' condition is reset by a subsequent *Note `STOP SLAVE':
stop-slave. statement, a *Note `START SLAVE': start-slave. statement
that includes no `UNTIL' clause, or a server restart.

The `UNTIL' clause can be useful for debugging replication, or to cause
replication to proceed until just before the point where you want to
avoid having the slave replicate an event. For example, if an unwise
*Note `DROP TABLE': drop-table. statement was executed on the master,
you can use `UNTIL' to tell the slave to execute up to that point but
no farther. To find what the event is, use *Note `mysqlbinlog':
mysqlbinlog. with the master binary log or slave relay log, or by using
a *Note `SHOW BINLOG EVENTS': show-binlog-events. statement.

If you are using `UNTIL' to have the slave process replicated queries
in sections, it is recommended that you start the slave with the
`--skip-slave-start' option to prevent the SQL thread from running when
the slave server starts. It is probably best to use this option in an
option file rather than on the command line, so that an unexpected
server restart does not cause it to be forgotten.

The *Note `SHOW SLAVE STATUS': show-slave-status. statement includes
output fields that display the current values of the `UNTIL' condition.

In old versions of MySQL (before 4.0.5), this statement was called
`SLAVE START'. This usage is still accepted in MySQL 5.5 for backward
compatibility, but is deprecated and is removed in MySQL 5.6.


File: manual.info,  Node: stop-slave,  Prev: start-slave,  Up: replication-slave-sql

13.4.2.6 `STOP SLAVE' Syntax
............................

     STOP SLAVE [THREAD_TYPES]

     THREAD_TYPES:
         [THREAD_TYPE [, THREAD_TYPE] ... ]

     THREAD_TYPE: IO_THREAD | SQL_THREAD

Stops the slave threads. *Note `STOP SLAVE': stop-slave. requires the
`SUPER' privilege. Recommended best practice is to execute `STOP SLAVE'
on the slave before stopping the slave server (see *Note
server-shutdown::, for more information).

_When using the row-based logging format_: You should execute `STOP
SLAVE' on the slave prior to shutting down the slave server if you are
replicating any tables that use a nontransactional storage engine (see
the `Note' later in this section). In MySQL 5.5.9 and later, you can
also use `STOP SLAVE SQL_THREAD' for this purpose.

Like *Note `START SLAVE': start-slave, this statement may be used with
the `IO_THREAD' and `SQL_THREAD' options to name the thread or threads
to be stopped.

*Note*:

In MySQL 5.5, *Note `STOP SLAVE': stop-slave. waits until the current
replication event group affecting one or more nontransactional tables
has finished executing (if there is any such replication group), or
until the user issues a *Note `KILL QUERY': kill. or *Note `KILL
CONNECTION': kill. statement. (Bug #319, Bug #38205)

In old versions of MySQL (before 4.0.5), this statement was called
`SLAVE STOP'. This usage is still accepted in MySQL 5.5 for backward
compatibility, but is deprecated and is removed in MySQL 5.6.


File: manual.info,  Node: sql-syntax-prepared-statements,  Next: sql-syntax-compound-statements,  Prev: sql-syntax-replication,  Up: sql-syntax

13.5 SQL Syntax for Prepared Statements
=======================================

* Menu:

* prepare::                      `PREPARE' Syntax
* execute::                      `EXECUTE' Syntax
* deallocate-prepare::           `DEALLOCATE PREPARE' Syntax
* statement-repreparation::      Automatic Prepared Statement Repreparation

MySQL 5.5 provides support for server-side prepared statements. This
support takes advantage of the efficient client/server binary protocol
implemented in MySQL 4.1, provided that you use an appropriate client
programming interface. Candidate interfaces include the MySQL C API
client library (for C programs), MySQL Connector/J (for Java programs),
and MySQL Connector/Net. For example, the C API provides a set of
function calls that make up its prepared statement API. See *Note
c-api-prepared-statements::. Other language interfaces can provide
support for prepared statements that use the binary protocol by linking
in the C client library, one example being the `mysqli' extension
(http://php.net/mysqli), available in PHP 5.0 and later.

An alternative SQL interface to prepared statements is available.  This
interface is not as efficient as using the binary protocol through a
prepared statement API, but requires no programming because it is
available directly at the SQL level:

   * You can use it when no programming interface is available to you.

   * You can use it from any program that enables you to send SQL
     statements to the server to be executed, such as the *Note
     `mysql': mysql. client program.

   * You can use it even if the client is using an old version of the
     client library. The only requirement is that you be able to
     connect to a server that is recent enough to support SQL syntax
     for prepared statements.

SQL syntax for prepared statements is intended to be used for
situations such as these:

   * You want to test how prepared statements work in your application
     before coding it.

   * An application has problems executing prepared statements and you
     want to determine interactively what the problem is.

   * You want to create a test case that describes a problem you are
     having with prepared statements, so that you can file a bug report.

   * You need to use prepared statements but do not have access to a
     programming API that supports them.

SQL syntax for prepared statements is based on three SQL statements:

   * *Note `PREPARE': prepare. prepares a statement for execution (see
     *Note prepare::).

   * *Note `EXECUTE': execute. executes a prepared statement (see *Note
     execute::).

   * *Note `DEALLOCATE PREPARE': deallocate-prepare. releases a
     prepared statement (see *Note deallocate-prepare::).

The following examples show two equivalent ways of preparing a
statement that computes the hypotenuse of a triangle given the lengths
of the two sides.

The first example shows how to create a prepared statement by using a
string literal to supply the text of the statement:

     mysql> PREPARE stmt1 FROM 'SELECT SQRT(POW(?,2) + POW(?,2)) AS hypotenuse';
     mysql> SET @a = 3;
     mysql> SET @b = 4;
     mysql> EXECUTE stmt1 USING @a, @b;
     +------------+
     | hypotenuse |
     +------------+
     |          5 |
     +------------+
     mysql> DEALLOCATE PREPARE stmt1;

The second example is similar, but supplies the text of the statement
as a user variable:

     mysql> SET @s = 'SELECT SQRT(POW(?,2) + POW(?,2)) AS hypotenuse';
     mysql> PREPARE stmt2 FROM @s;
     mysql> SET @a = 6;
     mysql> SET @b = 8;
     mysql> EXECUTE stmt2 USING @a, @b;
     +------------+
     | hypotenuse |
     +------------+
     |         10 |
     +------------+
     mysql> DEALLOCATE PREPARE stmt2;

Here is an additional example that demonstrates how to choose the table
on which to perform a query at runtime, by storing the name of the
table as a user variable:

     mysql> USE test;
     mysql> CREATE TABLE t1 (a INT NOT NULL);
     mysql> INSERT INTO t1 VALUES (4), (8), (11), (32), (80);

     mysql> SET @table = 't1';
     mysql> SET @s = CONCAT('SELECT * FROM ', @table);

     mysql> PREPARE stmt3 FROM @s;
     mysql> EXECUTE stmt3;
     +----+
     | a  |
     +----+
     |  4 |
     |  8 |
     | 11 |
     | 32 |
     | 80 |
     +----+

     mysql> DEALLOCATE PREPARE stmt3;

A prepared statement is specific to the session in which it was
created. If you terminate a session without deallocating a previously
prepared statement, the server deallocates it automatically.

A prepared statement is also global to the session. If you create a
prepared statement within a stored routine, it is not deallocated when
the stored routine ends.

To guard against too many prepared statements being created
simultaneously, set the `max_prepared_stmt_count' system variable. To
prevent the use of prepared statements, set the value to 0.

The following SQL statements can be used as prepared statements:

     ALTER TABLE
     ANALYZE TABLE
     CACHE INDEX
     CALL
     CHANGE MASTER
     CHECKSUM {TABLE | TABLES}
     COMMIT
     {CREATE | RENAME | DROP} DATABASE
     {CREATE | DROP} INDEX
     {CREATE | RENAME | DROP} TABLE
     {CREATE | RENAME | DROP} USER
     DELETE
     DO
     FLUSH {TABLE | TABLES | TABLES WITH READ LOCK | HOSTS | PRIVILEGES
       | LOGS | STATUS | MASTER | SLAVE | DES_KEY_FILE | USER_RESOURCES}
     GRANT
     INSERT
     INSTALL PLUGIN
     KILL
     LOAD INDEX INTO CACHE
     OPTIMIZE TABLE
     REPAIR TABLE
     REPLACE
     RESET {MASTER | SLAVE | QUERY CACHE}
     REVOKE
     SELECT
     SET
     SHOW {AUTHORS | CONTRIBUTORS | WARNINGS | ERRORS}
     SHOW BINLOG EVENTS
     SHOW CREATE {PROCEDURE | FUNCTION | EVENT | TABLE | VIEW}
     SHOW {MASTER | BINARY} LOGS
     SHOW {MASTER | SLAVE} STATUS
     SLAVE {START | STOP}
     TRUNCATE TABLE
     UNINSTALL PLUGIN
     UPDATE

Other statements are not supported in MySQL 5.5.

Generally, statements not permitted in SQL prepared statements are also
not permitted in stored programs. Exceptions are noted in *Note
stored-program-restrictions::.

Metadata changes to tables or views referred to by prepared statements
are detected and cause automatic repreparation of the statement when it
is next executed. For more information, see *Note
statement-repreparation::.

Placeholders can be used for the arguments of the `LIMIT' clause when
using prepared statements. See *Note select::.

In prepared *Note `CALL': call. statements used with *Note `PREPARE':
prepare. and *Note `EXECUTE': execute, placeholder support for `OUT'
and `INOUT' parameters is available beginning with MySQL 5.5. See *Note
call::, for an example and a workaround for earlier versions.
Placeholders can be used for `IN' parameters regardless of version.

SQL syntax for prepared statements cannot be used in nested fashion.
That is, a statement passed to *Note `PREPARE': prepare. cannot itself
be a *Note `PREPARE': prepare, *Note `EXECUTE': execute, or *Note
`DEALLOCATE PREPARE': deallocate-prepare. statement.

SQL syntax for prepared statements is distinct from using prepared
statement API calls. For example, you cannot use the *Note
`mysql_stmt_prepare()': mysql-stmt-prepare. C API function to prepare a
*Note `PREPARE': prepare, *Note `EXECUTE': execute, or *Note
`DEALLOCATE PREPARE': deallocate-prepare. statement.

SQL syntax for prepared statements can be used within stored
procedures, but not in stored functions or triggers. However, a cursor
cannot be used for a dynamic statement that is prepared and executed
with *Note `PREPARE': prepare. and *Note `EXECUTE': execute. The
statement for a cursor is checked at cursor creation time, so the
statement cannot be dynamic.

SQL syntax for prepared statements does not support multi-statements
(that is, multiple statements within a single string separated by ``;''
characters).

Prepared statements use the query cache under the conditions described
in *Note query-cache-operation::.

To write C programs that use the *Note `CALL': call.  SQL statement to
execute stored procedures that contain prepared statements, the
`CLIENT_MULTI_RESULTS' flag must be enabled. This is because each *Note
`CALL': call.  returns a result to indicate the call status, in
addition to any result sets that might be returned by statements
executed within the procedure.

`CLIENT_MULTI_RESULTS' can be enabled when you call *Note
`mysql_real_connect()': mysql-real-connect, either explicitly by
passing the `CLIENT_MULTI_RESULTS' flag itself, or implicitly by passing
`CLIENT_MULTI_STATEMENTS' (which also enables `CLIENT_MULTI_RESULTS').
For additional information, see *Note call::.


File: manual.info,  Node: prepare,  Next: execute,  Prev: sql-syntax-prepared-statements,  Up: sql-syntax-prepared-statements

13.5.1 `PREPARE' Syntax
-----------------------

     PREPARE STMT_NAME FROM PREPARABLE_STMT

The *Note `PREPARE': prepare. statement prepares a SQL statement and
assigns it a name, STMT_NAME, by which to refer to the statement later.
The prepared statement is executed with *Note `EXECUTE': execute. and
released with *Note `DEALLOCATE PREPARE': deallocate-prepare. For
examples, see *Note sql-syntax-prepared-statements::.

Statement names are not case sensitive.  PREPARABLE_STMT is either a
string literal or a user variable that contains the text of the SQL
statement. The text must represent a single statement, not multiple
statements. Within the statement, `?' characters can be used as
parameter markers to indicate where data values are to be bound to the
query later when you execute it. The `?' characters should not be
enclosed within quotation marks, even if you intend to bind them to
string values.  Parameter markers can be used only where data values
should appear, not for SQL keywords, identifiers, and so forth.

If a prepared statement with the given name already exists, it is
deallocated implicitly before the new statement is prepared. This means
that if the new statement contains an error and cannot be prepared, an
error is returned and no statement with the given name exists.

The scope of a prepared statement is the session within which it is
created, which as several implications:

   * A prepared statement created in one session is not available to
     other sessions.

   * When a session ends, whether normally or abnormally, its prepared
     statements no longer exist. If auto-reconnect is enabled, the
     client is not notified that the connection was lost. For this
     reason, clients may wish to disable auto-reconnect. See *Note
     auto-reconnect::.

   * A prepared statement created within a stored program continues to
     exist after the program finishes executing and can be executed
     outside the program later.

   * A statement prepared in stored program context cannot refer to
     stored procedure or function parameters or local variables because
     they go out of scope when the program ends and would be
     unavailable were the statement to be executed later outside the
     program. As a workaround, refer instead to user-defined variables,
     which also have session scope; see *Note user-variables::.


File: manual.info,  Node: execute,  Next: deallocate-prepare,  Prev: prepare,  Up: sql-syntax-prepared-statements

13.5.2 `EXECUTE' Syntax
-----------------------

     EXECUTE STMT_NAME
         [USING @VAR_NAME [, @VAR_NAME] ...]

After preparing a statement with *Note `PREPARE': prepare, you execute
it with an *Note `EXECUTE': execute. statement that refers to the
prepared statement name. If the prepared statement contains any
parameter markers, you must supply a `USING' clause that lists user
variables containing the values to be bound to the parameters.
Parameter values can be supplied only by user variables, and the
`USING' clause must name exactly as many variables as the number of
parameter markers in the statement.

You can execute a given prepared statement multiple times, passing
different variables to it or setting the variables to different values
before each execution.

For examples, see *Note sql-syntax-prepared-statements::.


File: manual.info,  Node: deallocate-prepare,  Next: statement-repreparation,  Prev: execute,  Up: sql-syntax-prepared-statements

13.5.3 `DEALLOCATE PREPARE' Syntax
----------------------------------

     {DEALLOCATE | DROP} PREPARE STMT_NAME

To deallocate a prepared statement produced with *Note `PREPARE':
prepare, use a *Note `DEALLOCATE PREPARE': deallocate-prepare.
statement that refers to the prepared statement name. Attempting to
execute a prepared statement after deallocating it results in an error.

For examples, see *Note sql-syntax-prepared-statements::.


File: manual.info,  Node: statement-repreparation,  Prev: deallocate-prepare,  Up: sql-syntax-prepared-statements

13.5.4 Automatic Prepared Statement Repreparation
-------------------------------------------------

Metadata changes to tables or views referred to by prepared statements
are detected and cause automatic repreparation of the statement when it
is next executed. This applies to prepared statements processed at the
SQL level (using the *Note `PREPARE': prepare. statement) and those
processed using the binary client/server protocol (using the *Note
`mysql_stmt_prepare()': mysql-stmt-prepare. C API function).

The server attempts repreparation up to three times. An error occurs if
all attempts fail.

Metadata changes occur for DDL statements such as those that create,
drop, alter, rename, or truncate tables, or that analyze, optimize, or
repair tables. Repreparation also occurs after referenced tables or
views are flushed from the table definition cache, either implicitly to
make room for new entries in the cache, or explicitly due to *Note
`FLUSH TABLES': flush.

Table content changes (for example, with *Note `INSERT': insert. or
*Note `UPDATE': update.) do not cause repreparation, nor do *Note
`SELECT': select. statements.

Repreparation is automatic, but to the extent that it occurs,
diminishes prepared statement performance.

Repreparation uses the default database and SQL mode that were in
effect for the original preparation.

The `Com_stmt_reprepare' status variable tracks the number of
repreparations.


File: manual.info,  Node: sql-syntax-compound-statements,  Next: sql-syntax-server-administration,  Prev: sql-syntax-prepared-statements,  Up: sql-syntax

13.6 MySQL Compound-Statement Syntax
====================================

* Menu:

* begin-end::                    `BEGIN ... END' Compound-Statement Syntax
* statement-labels::             Statement Label Syntax
* declare::                      `DECLARE' Syntax
* stored-program-variables::     Variables in Stored Programs
* flow-control-statements::      Flow Control Statements
* cursors::                      Cursors
* condition-handling::           Condition Handling

This section describes the syntax for the *Note `BEGIN ... END':
begin-end.  compound statement and other statements that can be used in
the body of stored programs: Stored procedures and functions, triggers,
and events. These objects are defined in terms of SQL code that is
stored on the server for later invocation (see *Note
stored-programs-views::).

A compound statement is a block that can contain other blocks;
declarations for variables, condition handlers, and cursors; and flow
control constructs such as loops and conditional tests.


File: manual.info,  Node: begin-end,  Next: statement-labels,  Prev: sql-syntax-compound-statements,  Up: sql-syntax-compound-statements

13.6.1 `BEGIN ... END' Compound-Statement Syntax
------------------------------------------------

     [BEGIN_LABEL:] BEGIN
         [STATEMENT_LIST]
     END [END_LABEL]

*Note `BEGIN ... END': begin-end.  syntax is used for writing compound
statements, which can appear within stored programs (stored procedures
and functions, triggers, and events). A compound statement can contain
multiple statements, enclosed by the `BEGIN' and `END' keywords.
STATEMENT_LIST represents a list of one or more statements, each
terminated by a semicolon (`;') statement delimiter. The STATEMENT_LIST
itself is optional, so the empty compound statement (`BEGIN END') is
legal.

*Note `BEGIN ... END': begin-end.  blocks can be nested.

Use of multiple statements requires that a client is able to send
statement strings containing the `;' statement delimiter. In the *Note
`mysql': mysql. command-line client, this is handled with the
`delimiter' command.  Changing the `;' end-of-statement delimiter (for
example, to `//') permit `;' to be used in a program body. For an
example, see *Note stored-programs-defining::.

A *Note `BEGIN ... END': begin-end. block can be labeled. See *Note
statement-labels::.

The optional `[NOT] ATOMIC' clause is not supported. This means that no
transactional savepoint is set at the start of the instruction block
and the `BEGIN' clause used in this context has no effect on the
current transaction.

*Note*:

Within all stored programs, the parser treats *Note `BEGIN [WORK]':
commit.  as the beginning of a *Note `BEGIN ... END': begin-end. block.
To begin a transaction in this context, use *Note `START TRANSACTION':
commit. instead.


File: manual.info,  Node: statement-labels,  Next: declare,  Prev: begin-end,  Up: sql-syntax-compound-statements

13.6.2 Statement Label Syntax
-----------------------------

     [BEGIN_LABEL:] BEGIN
         [STATEMENT_LIST]
     END [END_LABEL]

     [BEGIN_LABEL:] LOOP
         STATEMENT_LIST
     END LOOP [END_LABEL]

     [BEGIN_LABEL:] REPEAT
         STATEMENT_LIST
     UNTIL SEARCH_CONDITION
     END REPEAT [END_LABEL]

     [BEGIN_LABEL:] WHILE SEARCH_CONDITION DO
         STATEMENT_LIST
     END WHILE [END_LABEL]

Labels are permitted for *Note `BEGIN ... END': begin-end.  blocks and
for the *Note `LOOP': loop, *Note `REPEAT': repeat, and *Note `WHILE':
while. statements. Label use for those statements follows these rules:

   * BEGIN_LABEL must be followed by a colon.

   * BEGIN_LABEL can be given without END_LABEL. If END_LABEL is
     present, it must be the same as BEGIN_LABEL.

   * END_LABEL cannot be given without BEGIN_LABEL.

   * Labels at the same nesting level must be distinct.

   * Labels can be up to 16 characters long.

To refer to a label within the labeled construct, use an *Note
`ITERATE': iterate. or *Note `LEAVE': leave. statement. The following
example uses those statements to continue iterating or terminate the
loop:

     CREATE PROCEDURE doiterate(p1 INT)
     BEGIN
       label1: LOOP
         SET p1 = p1 + 1;
         IF p1 < 10 THEN ITERATE label1; END IF;
         LEAVE label1;
       END LOOP label1;
     END;

The scope of a block label does not include the code for handlers
declared within the block. For details, see *Note declare-handler::.


File: manual.info,  Node: declare,  Next: stored-program-variables,  Prev: statement-labels,  Up: sql-syntax-compound-statements

13.6.3 `DECLARE' Syntax
-----------------------

The *Note `DECLARE': declare. statement is used to define various items
local to a program:

   * Local variables. See *Note stored-program-variables::.

   * Conditions and handlers. See *Note condition-handling::.

   * Cursors. See *Note cursors::.

*Note `DECLARE': declare. is permitted only inside a *Note `BEGIN ...
END': begin-end.  compound statement and must be at its start, before
any other statements.

Declarations must follow a certain order. Cursor declarations must
appear before handler declarations. Variable and condition declarations
must appear before cursor or handler declarations.


File: manual.info,  Node: stored-program-variables,  Next: flow-control-statements,  Prev: declare,  Up: sql-syntax-compound-statements

13.6.4 Variables in Stored Programs
-----------------------------------

* Menu:

* declare-local-variable::       Local Variable `DECLARE' Syntax
* local-variable-scope::         Local Variable Scope and Resolution

System variables and user-defined variables can be used in stored
programs, just as they can be used outside stored-program context.  In
addition, stored programs can use `DECLARE' to define local variables,
and stored routines (procedures and functions) can be declared to take
parameters that communicate values between the routine and its caller.

   * To declare local variables, use the *Note `DECLARE':
     declare-local-variable.  statement, as described in *Note
     declare-local-variable::.

   * Variables can be set directly with the *Note `SET': set-statement.
     statement. See *Note set-statement::.

   * Results from queries can be retrieved into local variables using
     *Note `SELECT ... INTO VAR_LIST': select-into. or by opening a
     cursor and using *Note `FETCH ... INTO VAR_LIST': fetch. See *Note
     select-into::, and *Note cursors::.

For information about the scope of local variables and how MySQL
resolves ambiguous names, see *Note local-variable-scope::.


File: manual.info,  Node: declare-local-variable,  Next: local-variable-scope,  Prev: stored-program-variables,  Up: stored-program-variables

13.6.4.1 Local Variable `DECLARE' Syntax
........................................

     DECLARE VAR_NAME [, VAR_NAME] ... TYPE [DEFAULT VALUE]

This statement declares local variables within stored programs.  To
provide a default value for a variable, include a `DEFAULT' clause. The
value can be specified as an expression; it need not be a constant. If
the `DEFAULT' clause is missing, the initial value is `NULL'.

Local variables are treated like stored routine parameters with respect
to data type and overflow checking. See *Note create-procedure::.

Variable declarations must appear before cursor or handler declarations.

Local variable names are not case sensitive. Permissible characters and
quoting rules are the same as for other identifiers, as described in
*Note identifiers::.

The scope of a local variable is the *Note `BEGIN ... END': begin-end.
block within which it is declared. The variable can be referred to in
blocks nested within the declaring block, except those blocks that
declare a variable with the same name.


File: manual.info,  Node: local-variable-scope,  Prev: declare-local-variable,  Up: stored-program-variables

13.6.4.2 Local Variable Scope and Resolution
............................................

The scope of a local variable is the *Note `BEGIN ... END': begin-end.
block within which it is declared. The variable can be referred to in
blocks nested within the declaring block, except those blocks that
declare a variable with the same name.

Because local variables are in scope only during stored program
execution, references to them are not permitted in prepared statements
created within a stored program. Prepared statement scope is the
current session, not the stored program, so the statement could be
executed after the program ends, at which point the variables would no
longer be in scope. For example, `SELECT ... INTO LOCAL_VAR' cannot be
used as a prepared statement. This restriction also applies to stored
procedure and function parameters. See *Note prepare::.

A local variable should not have the same name as a table column. If an
SQL statement, such as a *Note `SELECT ... INTO': select. statement,
contains a reference to a column and a declared local variable with the
same name, MySQL currently interprets the reference as the name of a
variable. Consider the following procedure definition:

     CREATE PROCEDURE sp1 (x VARCHAR(5))
     BEGIN
       DECLARE xname VARCHAR(5) DEFAULT 'bob';
       DECLARE newname VARCHAR(5);
       DECLARE xid INT;

       SELECT xname, id INTO newname, xid
         FROM table1 WHERE xname = xname;
       SELECT newname;
     END;

MySQL interprets `xname' in the *Note `SELECT': select. statement as a
reference to the `xname' _variable_ rather than the `xname' _column_.
Consequently, when the procedure `sp1()'is called, the `newname'
variable returns the value `'bob'' regardless of the value of the
`table1.xname' column.

Similarly, the cursor definition in the following procedure contains a
*Note `SELECT': select. statement that refers to `xname'. MySQL
interprets this as a reference to the variable of that name rather than
a column reference.

     CREATE PROCEDURE sp2 (x VARCHAR(5))
     BEGIN
       DECLARE xname VARCHAR(5) DEFAULT 'bob';
       DECLARE newname VARCHAR(5);
       DECLARE xid INT;
       DECLARE done TINYINT DEFAULT 0;
       DECLARE cur1 CURSOR FOR SELECT xname, id FROM table1;
       DECLARE CONTINUE HANDLER FOR NOT FOUND SET done = 1;

       OPEN cur1;
       read_loop: LOOP
         FETCH FROM cur1 INTO newname, xid;
         IF done THEN LEAVE read_loop; END IF;
         SELECT newname;
       END LOOP;
       CLOSE cur1;
     END;

See also *Note stored-program-restrictions::.


File: manual.info,  Node: flow-control-statements,  Next: cursors,  Prev: stored-program-variables,  Up: sql-syntax-compound-statements

13.6.5 Flow Control Statements
------------------------------

* Menu:

* case::                         `CASE' Syntax
* if::                           `IF' Syntax
* iterate::                      `ITERATE' Syntax
* leave::                        `LEAVE' Syntax
* loop::                         `LOOP' Syntax
* repeat::                       `REPEAT' Syntax
* return::                       `RETURN' Syntax
* while::                        `WHILE' Syntax

MySQL supports the *Note `IF': if, *Note `CASE': case, *Note `ITERATE':
iterate, *Note `LEAVE': leave.  *Note `LOOP': loop, *Note `WHILE':
while, and *Note `REPEAT': repeat. constructs for flow control within
stored programs. It also supports *Note `RETURN': return. within stored
functions.

Many of these constructs contain other statements, as indicated by the
grammar specifications in the following sections. Such constructs may
be nested. For example, an *Note `IF': if. statement might contain a
*Note `WHILE': while. loop, which itself contains a *Note `CASE': case.
statement.

MySQL does not support `FOR' loops.


File: manual.info,  Node: case,  Next: if,  Prev: flow-control-statements,  Up: flow-control-statements

13.6.5.1 `CASE' Syntax
......................

     CASE CASE_VALUE
         WHEN WHEN_VALUE THEN STATEMENT_LIST
         [WHEN WHEN_VALUE THEN STATEMENT_LIST] ...
         [ELSE STATEMENT_LIST]
     END CASE

Or:

     CASE
         WHEN SEARCH_CONDITION THEN STATEMENT_LIST
         [WHEN SEARCH_CONDITION THEN STATEMENT_LIST] ...
         [ELSE STATEMENT_LIST]
     END CASE

The *Note `CASE': case. statement for stored programs implements a
complex conditional construct.

*Note*:

There is also a `CASE' _expression_, which differs from the *Note
`CASE': case.  _statement_ described here. See *Note
control-flow-functions::. The *Note `CASE': case. statement cannot have
an `ELSE NULL' clause, and it is terminated with `END CASE' instead of
`END'.

For the first syntax, CASE_VALUE is an expression. This value is
compared to the WHEN_VALUE expression in each `WHEN' clause until one
of them is equal. When an equal WHEN_VALUE is found, the corresponding
`THEN' clause STATEMENT_LIST executes. If no WHEN_VALUE is equal, the
`ELSE' clause STATEMENT_LIST executes, if there is one.

This syntax cannot be used to test for equality with `NULL' because
`NULL = NULL' is false. See *Note working-with-null::.

For the second syntax, each `WHEN' clause SEARCH_CONDITION expression is
evaluated until one is true, at which point its corresponding `THEN'
clause STATEMENT_LIST executes. If no SEARCH_CONDITION is equal, the
`ELSE' clause STATEMENT_LIST executes, if there is one.

If no WHEN_VALUE or SEARCH_CONDITION matches the value tested and the
*Note `CASE': case. statement contains no `ELSE' clause, a `Case not
found for CASE statement' error results.

Each STATEMENT_LIST consists of one or more SQL statements; an empty
STATEMENT_LIST is not permitted.

To handle situations where no value is matched by any `WHEN' clause,
use an `ELSE' containing an empty *Note `BEGIN ... END': begin-end.
block, as shown in this example. (The indentation used here in the
`ELSE' clause is for purposes of clarity only, and is not otherwise
significant.)

     DELIMITER |

     CREATE PROCEDURE p()
       BEGIN
         DECLARE v INT DEFAULT 1;

         CASE v
           WHEN 2 THEN SELECT v;
           WHEN 3 THEN SELECT 0;
           ELSE
             BEGIN
             END;
         END CASE;
       END;
       |


File: manual.info,  Node: if,  Next: iterate,  Prev: case,  Up: flow-control-statements

13.6.5.2 `IF' Syntax
....................

     IF SEARCH_CONDITION THEN STATEMENT_LIST
         [ELSEIF SEARCH_CONDITION THEN STATEMENT_LIST] ...
         [ELSE STATEMENT_LIST]
     END IF

The *Note `IF': if. statement for stored programs implements a basic
conditional construct.

*Note*:

There is also an `IF()' _function_, which differs from the *Note `IF':
if.  _statement_ described here. See *Note control-flow-functions::. The
*Note `IF': if. statement can have `THEN', `ELSE', and `ELSEIF'
clauses, and it is terminated with `END IF'.

If the SEARCH_CONDITION evaluates to true, the corresponding `THEN' or
`ELSEIF' clause STATEMENT_LIST executes. If no SEARCH_CONDITION
matches, the `ELSE' clause STATEMENT_LIST executes.

Each STATEMENT_LIST consists of one or more SQL statements; an empty
STATEMENT_LIST is not permitted.

An `IF ... END IF' block, like all other flow-control blocks used
within stored programs, must be terminated with a semicolon, as shown
in this example:

     DELIMITER //

     CREATE FUNCTION SimpleCompare(n INT, m INT)
       RETURNS VARCHAR(20)

       BEGIN
         DECLARE s VARCHAR(20);

         IF n > m THEN SET s = '>';
         ELSEIF n = m THEN SET s = '=';
         ELSE SET s = '<';
         END IF;

         SET s = CONCAT(n, ' ', s, ' ', m);

         RETURN s;
       END //

     DELIMITER ;

As with other flow-control constructs, `IF ... END IF' blocks may be
nested within other flow-control constructs, including other *Note
`IF': if.  statements. Each *Note `IF': if. must be terminated by its
own `END IF' followed by a semicolon. You can use indentation to make
nested flow-control blocks more easily readable by humans (although
this is not required by MySQL), as shown here:

     DELIMITER //

     CREATE FUNCTION VerboseCompare (n INT, m INT)
       RETURNS VARCHAR(50)

       BEGIN
         DECLARE s VARCHAR(50);

         IF n = m THEN SET s = 'equals';
         ELSE
           IF n > m THEN SET s = 'greater';
           ELSE SET s = 'less';
           END IF;

           SET s = CONCAT('is ', s, ' than');
         END IF;

         SET s = CONCAT(n, ' ', s, ' ', m, '.');

         RETURN s;
       END //

     DELIMITER ;

In this example, the inner *Note `IF': if. is evaluated only if `n' is
not equal to `m'.


File: manual.info,  Node: iterate,  Next: leave,  Prev: if,  Up: flow-control-statements

13.6.5.3 `ITERATE' Syntax
.........................

     ITERATE LABEL

*Note `ITERATE': iterate. can appear only within *Note `LOOP': loop,
*Note `REPEAT': repeat, and *Note `WHILE': while. statements.  *Note
`ITERATE': iterate. means `start the loop again.'

For an example, see *Note loop::.


File: manual.info,  Node: leave,  Next: loop,  Prev: iterate,  Up: flow-control-statements

13.6.5.4 `LEAVE' Syntax
.......................

     LEAVE LABEL

This statement is used to exit the flow control construct that has the
given label. If the label is for the outermost stored program block,
*Note `LEAVE': leave. exits the program.

*Note `LEAVE': leave. can be used within *Note `BEGIN ... END':
begin-end. or loop constructs (*Note `LOOP': loop, *Note `REPEAT':
repeat, *Note `WHILE': while.).

For an example, see *Note loop::.


File: manual.info,  Node: loop,  Next: repeat,  Prev: leave,  Up: flow-control-statements

13.6.5.5 `LOOP' Syntax
......................

     [BEGIN_LABEL:] LOOP
         STATEMENT_LIST
     END LOOP [END_LABEL]

*Note `LOOP': loop. implements a simple loop construct, enabling
repeated execution of the statement list, which consists of one or more
statements, each terminated by a semicolon (`;') statement delimiter.
The statements within the loop are repeated until the loop is
terminated. Usually, this is accomplished with a *Note `LEAVE': leave.
statement. Within a stored function, *Note `RETURN': return. can also be
used, which exits the function entirely.

Neglecting to include a loop-termination statement results in an
infinite loop.

A *Note `LOOP': loop. statement can be labeled.  For the rules
regarding label use, see *Note statement-labels::.

Example:

     CREATE PROCEDURE doiterate(p1 INT)
     BEGIN
       label1: LOOP
         SET p1 = p1 + 1;
         IF p1 < 10 THEN
           ITERATE label1;
         END IF;
         LEAVE label1;
       END LOOP label1;
       SET @x = p1;
     END;


File: manual.info,  Node: repeat,  Next: return,  Prev: loop,  Up: flow-control-statements

13.6.5.6 `REPEAT' Syntax
........................

     [BEGIN_LABEL:] REPEAT
         STATEMENT_LIST
     UNTIL SEARCH_CONDITION
     END REPEAT [END_LABEL]

The statement list within a *Note `REPEAT': repeat. statement is
repeated until the SEARCH_CONDITION expression is true. Thus, a *Note
`REPEAT': repeat. always enters the loop at least once.  STATEMENT_LIST
consists of one or more statements, each terminated by a semicolon
(`;') statement delimiter.

A *Note `REPEAT': repeat. statement can be labeled. For the rules
regarding label use, see *Note statement-labels::.

Example:

     mysql> delimiter //

     mysql> CREATE PROCEDURE dorepeat(p1 INT)
         -> BEGIN
         ->   SET @x = 0;
         ->   REPEAT
         ->     SET @x = @x + 1;
         ->   UNTIL @x > p1 END REPEAT;
         -> END
         -> //
     Query OK, 0 rows affected (0.00 sec)

     mysql> CALL dorepeat(1000)//
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT @x//
     +------+
     | @x   |
     +------+
     | 1001 |
     +------+
     1 row in set (0.00 sec)


File: manual.info,  Node: return,  Next: while,  Prev: repeat,  Up: flow-control-statements

13.6.5.7 `RETURN' Syntax
........................

     RETURN EXPR

The *Note `RETURN': return. statement terminates execution of a stored
function and returns the value EXPR to the function caller. There must
be at least one *Note `RETURN': return.  statement in a stored
function. There may be more than one if the function has multiple exit
points.

This statement is not used in stored procedures, triggers, or events.
The *Note `LEAVE': leave. statement can be used to exit a stored
program of those types.


File: manual.info,  Node: while,  Prev: return,  Up: flow-control-statements

13.6.5.8 `WHILE' Syntax
.......................

     [BEGIN_LABEL:] WHILE SEARCH_CONDITION DO
         STATEMENT_LIST
     END WHILE [END_LABEL]

The statement list within a *Note `WHILE': while.  statement is
repeated as long as the SEARCH_CONDITION expression is true.
STATEMENT_LIST consists of one or more SQL statements, each terminated
by a semicolon (`;') statement delimiter.

A *Note `WHILE': while. statement can be labeled.  For the rules
regarding label use, see *Note statement-labels::.

Example:

     CREATE PROCEDURE dowhile()
     BEGIN
       DECLARE v1 INT DEFAULT 5;

       WHILE v1 > 0 DO
         ...
         SET v1 = v1 - 1;
       END WHILE;
     END;


File: manual.info,  Node: cursors,  Next: condition-handling,  Prev: flow-control-statements,  Up: sql-syntax-compound-statements

13.6.6 Cursors
--------------

* Menu:

* close::                        Cursor `CLOSE' Syntax
* declare-cursor::               Cursor `DECLARE' Syntax
* fetch::                        Cursor `FETCH' Syntax
* open::                         Cursor `OPEN' Syntax

MySQL supports cursors inside stored programs. The syntax is as in
embedded SQL. Cursors have these properties:

   * Asensitive: The server may or may not make a copy of its result
     table

   * Read only: Not updatable

   * Nonscrollable: Can be traversed only in one direction and cannot
     skip rows

Cursor declarations must appear before handler declarations and after
variable and condition declarations.

Example:

     CREATE PROCEDURE curdemo()
     BEGIN
       DECLARE done INT DEFAULT FALSE;
       DECLARE a CHAR(16);
       DECLARE b, c INT;
       DECLARE cur1 CURSOR FOR SELECT id,data FROM test.t1;
       DECLARE cur2 CURSOR FOR SELECT i FROM test.t2;
       DECLARE CONTINUE HANDLER FOR NOT FOUND SET done = TRUE;

       OPEN cur1;
       OPEN cur2;

       read_loop: LOOP
         FETCH cur1 INTO a, b;
         FETCH cur2 INTO c;
         IF done THEN
           LEAVE read_loop;
         END IF;
         IF b < c THEN
           INSERT INTO test.t3 VALUES (a,b);
         ELSE
           INSERT INTO test.t3 VALUES (a,c);
         END IF;
       END LOOP;

       CLOSE cur1;
       CLOSE cur2;
     END;


File: manual.info,  Node: close,  Next: declare-cursor,  Prev: cursors,  Up: cursors

13.6.6.1 Cursor `CLOSE' Syntax
..............................

     CLOSE CURSOR_NAME

This statement closes a previously opened cursor. For an example, see
*Note cursors::.

An error occurs if the cursor is not open.

If not closed explicitly, a cursor is closed at the end of the *Note
`BEGIN ... END': begin-end. block in which it was declared.


File: manual.info,  Node: declare-cursor,  Next: fetch,  Prev: close,  Up: cursors

13.6.6.2 Cursor `DECLARE' Syntax
................................

     DECLARE CURSOR_NAME CURSOR FOR SELECT_STATEMENT

This statement declares a cursor and associates it with a *Note
`SELECT': select. statement that retrieves the rows to be traversed by
the cursor. To fetch the rows later, use a *Note `FETCH': fetch.
statement. The number of columns retrieved by the *Note `SELECT':
select. statement must match the number of output variables specified
in the *Note `FETCH': fetch. statement.

The *Note `SELECT': select. statement cannot have an `INTO' clause.

Cursor declarations must appear before handler declarations and after
variable and condition declarations.

A stored program may contain multiple cursor declarations, but each
cursor declared in a given block must have a unique name.  For an
example, see *Note cursors::.

For information available through *Note `SHOW': show. statements, it is
possible in many cases to obtain equivalent information by using a
cursor with an `INFORMATION_SCHEMA' table.


File: manual.info,  Node: fetch,  Next: open,  Prev: declare-cursor,  Up: cursors

13.6.6.3 Cursor `FETCH' Syntax
..............................

     FETCH [[NEXT] FROM] CURSOR_NAME INTO VAR_NAME [, VAR_NAME] ...

This statement fetches the next row for the *Note `SELECT': select.
statement associated with the specified cursor (which must be open),
and advances the cursor pointer. If a row exists, the fetched columns
are stored in the named variables. The number of columns retrieved by
the *Note `SELECT': select. statement must match the number of output
variables specified in the *Note `FETCH': fetch. statement.

If no more rows are available, a No Data condition occurs with SQLSTATE
value `'02000''. To detect this condition, you can set up a handler for
it (or for a `NOT FOUND' condition). For an example, see *Note
cursors::.


File: manual.info,  Node: open,  Prev: fetch,  Up: cursors

13.6.6.4 Cursor `OPEN' Syntax
.............................

     OPEN CURSOR_NAME

This statement opens a previously declared cursor. For an example, see
*Note cursors::.


File: manual.info,  Node: condition-handling,  Prev: cursors,  Up: sql-syntax-compound-statements

13.6.7 Condition Handling
-------------------------

* Menu:

* declare-condition::            `DECLARE ... CONDITION' Syntax
* declare-handler::              `DECLARE ... HANDLER' Syntax
* resignal::                     `RESIGNAL' Syntax
* signal::                       `SIGNAL' Syntax

Conditions may arise during stored program execution that require
special handling, such as exiting the current program block or
continuing execution. Handlers can be defined for general conditions
such as warnings or exceptions, or for specific conditions such as a
particular error code. Specific conditions can be assigned names and
referred to that way in handlers.

To name a condition, use the *Note `DECLARE ... CONDITION':
declare-condition. statement. To declare a handler, use the *Note
`DECLARE ... HANDLER': declare-handler. statement. See *Note
declare-condition::, and *Note declare-handler::.

To raise a condition, use the *Note `SIGNAL': signal. statement. To
modify condition information within a condition handler, use *Note
`RESIGNAL': resignal. See *Note declare-condition::, and *Note
declare-handler::.

Another statement related to conditions is `GET DIAGNOSTICS'. The `GET
DIAGNOSTICS' statement is not supported until MySQL 5.6.

Before MySQL 5.6.3, if a statement that generates a warning or error
causes a condition handler to be invoked, the handler may not clear the
diagnostic area. This might lead to the appearance that the handler was
not invoked. The following discussion demonstrates the issue and
provides a workaround.

Suppose that a table `t1' is empty. The following procedure selects
from it, raising a No Data condition:

     CREATE PROCEDURE p1()
     BEGIN
       DECLARE a INT;
       DECLARE CONTINUE HANDLER FOR NOT FOUND
         BEGIN
           SET @handler_invoked = 1;
         END;
       SELECT c1 INTO a FROM t1;
     END;

As can be seen from the following sequence of statements, the condition
is not cleared by handler invocation (otherwise, the *Note `SHOW
WARNINGS': show-warnings. output would be empty). But as can be seen by
the value of `@handler_invoked', the handler was indeed invoked
(otherwise its value would be 0).

     mysql> SET @handler_invoked = 0;
     Query OK, 0 rows affected (0.00 sec)

     mysql> CALL p1();
     Query OK, 0 rows affected, 1 warning (0.00 sec)

     mysql> SHOW WARNINGS;
     +---------+------+-----------------------------------------------------+
     | Level   | Code | Message                                             |
     +---------+------+-----------------------------------------------------+
     | Warning | 1329 | No data - zero rows fetched, selected, or processed |
     +---------+------+-----------------------------------------------------+
     1 row in set (0.00 sec)

     mysql> SELECT @handler_invoked;
     +------------------+
     | @handler_invoked |
     +------------------+
     |                1 |
     +------------------+
     1 row in set (0.00 sec)

To work around this issue, use a condition handler containing a
statement that clears warnings:

     CREATE PROCEDURE p1()
     BEGIN
       DECLARE a INT;
       DECLARE CONTINUE HANDLER FOR NOT FOUND
         BEGIN
           SELECT 1 INTO @handler_invoked FROM (SELECT 1) AS t;
         END;
       SELECT c1 INTO a FROM t1;
     END;

This works for `CONTINUE' and `EXIT' handlers.

This issue is resolved as of MySQL 5.6.3 and no workaround is needed.


File: manual.info,  Node: declare-condition,  Next: declare-handler,  Prev: condition-handling,  Up: condition-handling

13.6.7.1 `DECLARE ... CONDITION' Syntax
.......................................

     DECLARE CONDITION_NAME CONDITION FOR CONDITION_VALUE

     CONDITION_VALUE:
         MYSQL_ERROR_CODE
       | SQLSTATE [VALUE] SQLSTATE_VALUE

The *Note `DECLARE ... CONDITION': declare-condition. statement
declares a named error condition, associating a name with a condition
that needs specific handling. The name can be referred to in a
subsequent *Note `DECLARE ... HANDLER': declare-handler. statement (see
*Note declare-handler::).

Condition declarations must appear before cursor or handler
declarations.

The CONDITION_VALUE for *Note `DECLARE ... CONDITION':
declare-condition. can be a MySQL error code (a number) or an SQLSTATE
value (a 5-character string literal). You should not use MySQL error
code 0 or SQLSTATE values that begin with `'00'', because those
indicate success rather than an error condition. For a list of MySQL
error codes and SQLSTATE values, see *Note error-messages-server::.

Using names for conditions can help make stored program code clearer.
For example, this handler applies to attempts to drop a nonexistent
table, but that is apparent only if you know the meaning of MySQL error
code 1051:

     DECLARE CONTINUE HANDLER FOR 1051
       BEGIN
         -- body of handler
       END;

By declaring a name for the condition, the purpose of the handler is
more readily seen:

     DECLARE no_such_table CONDITION FOR 1051;
     DECLARE CONTINUE HANDLER FOR no_such_table
       BEGIN
         -- body of handler
       END;

Here is a named condition for the same condition, but based on the
corresponding SQLSTATE value rather than the MySQL error code:

     DECLARE no_such_table CONDITION FOR SQLSTATE '42S02';
     DECLARE CONTINUE HANDLER FOR no_such_table
       BEGIN
         -- body of handler
       END;

Condition names referred to in *Note `SIGNAL': signal. or use *Note
`RESIGNAL': resignal. statements must be associated with SQLSTATE
values, not MySQL error codes.


File: manual.info,  Node: declare-handler,  Next: resignal,  Prev: declare-condition,  Up: condition-handling

13.6.7.2 `DECLARE ... HANDLER' Syntax
.....................................

     DECLARE HANDLER_ACTION HANDLER
         FOR CONDITION_VALUE [, CONDITION_VALUE] ...
         STATEMENT

     HANDLER_ACTION:
         CONTINUE
       | EXIT
       | UNDO

     CONDITION_VALUE:
         MYSQL_ERROR_CODE
       | SQLSTATE [VALUE] SQLSTATE_VALUE
       | CONDITION_NAME
       | SQLWARNING
       | NOT FOUND
       | SQLEXCEPTION

The *Note `DECLARE ... HANDLER': declare-handler. statement specifies a
handler that deals with one or more conditions. If one of these
conditions occurs, the specified STATEMENT executes.  STATEMENT can be
a simple statement such as `SET VAR_NAME = VALUE', or a compound
statement written using `BEGIN' and `END' (see *Note begin-end::).

Handler declarations must appear after variable or condition
declarations.

The HANDLER_ACTION value indicates what action the handler takes after
execution of the handler statement:

   * `CONTINUE': Execution of the current program continues.

   * `EXIT': Execution terminates for the *Note `BEGIN ... END':
     begin-end. compound statement in which the handler is declared.
     This is true even if the condition occurs in an inner block.

   * `UNDO': Not supported.

The CONDITION_VALUE for *Note `DECLARE ... HANDLER': declare-handler.
indicates the specific condition or class of conditions that activates
the handler:

   * A MySQL error code (a number) or an SQLSTATE value (a 5-character
     string literal). You should not use MySQL error code 0 or SQLSTATE
     values that begin with `'00'', because those indicate success
     rather than an error condition. For a list of MySQL error codes
     and SQLSTATE values, see *Note error-messages-server::.

   * A condition name previously specified with *Note `DECLARE ...
     CONDITION': declare-condition. A condition name can be associated
     with a MySQL error code or SQLSTATE value. See *Note
     declare-condition::.

   * `SQLWARNING' is shorthand for the class of SQLSTATE values that
     begin with `'01''.

   * `NOT FOUND' is shorthand for the class of SQLSTATE values that
     begin with `'02''.  This is relevant within the context of cursors
     and is used to control what happens when a cursor reaches the end
     of a data set. If no more rows are available, a No Data condition
     occurs with SQLSTATE value `'02000''. To detect this condition,
     you can set up a handler for it (or for a `NOT FOUND' condition).
     For an example, see *Note cursors::. This condition also occurs
     for `SELECT ... INTO VAR_LIST' statements that retrieve no rows.

   * `SQLEXCEPTION' is shorthand for the class of SQLSTATE values that
     do not begin with `'00'', `'01'', or `'02''.

If a condition occurs for which no handler has been declared, the
action taken depends on the condition class:

   * For `SQLEXCEPTION' conditions, the stored program terminates at
     the statement that raised the condition, as if there were an `EXIT'
     handler. If the program was called by another stored program, the
     calling program handles the condition using the handler selection
     rules applied to its own handlers.

   * For `SQLWARNING' conditions, the program continues executing, as
     if there were a `CONTINUE' handler.

   * For `NOT FOUND' conditions, if the condition was raised normally,
     the action is `CONTINUE'. If it was raised by *Note `SIGNAL':
     signal. or *Note `RESIGNAL': resignal, the action is `EXIT'.

The following example uses a handler for `SQLSTATE '23000'', which
occurs for a duplicate-key error:

     mysql> CREATE TABLE test.t (s1 INT, PRIMARY KEY (s1));
     Query OK, 0 rows affected (0.00 sec)

     mysql> delimiter //

     mysql> CREATE PROCEDURE handlerdemo ()
         -> BEGIN
         ->   DECLARE CONTINUE HANDLER FOR SQLSTATE '23000' SET @x2 = 1;
         ->   SET @x = 1;
         ->   INSERT INTO test.t VALUES (1);
         ->   SET @x = 2;
         ->   INSERT INTO test.t VALUES (1);
         ->   SET @x = 3;
         -> END;
         -> //
     Query OK, 0 rows affected (0.00 sec)

     mysql> CALL handlerdemo()//
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT @x//
         +------+
         | @x   |
         +------+
         | 3    |
         +------+
         1 row in set (0.00 sec)

Notice that `@x' is `3' after the procedure executes, which shows that
execution continued to the end of the procedure after the error
occurred. If the *Note `DECLARE ... HANDLER': declare-handler.
statement had not been present, MySQL would have taken the default
action (`EXIT') after the second *Note `INSERT': insert. failed due to
the `PRIMARY KEY' constraint, and `SELECT @x' would have returned `2'.

To ignore a condition, declare a `CONTINUE' handler for it and
associate it with an empty block. For example:

     DECLARE CONTINUE HANDLER FOR SQLWARNING BEGIN END;

The scope of a block label does not include the code for handlers
declared within the block. Therefore, the statement associated with a
handler cannot use *Note `ITERATE': iterate. or *Note `LEAVE': leave.
to refer to labels for blocks that enclose the handler declaration.
Consider the following example, where the *Note `REPEAT': repeat. block
has a label of `retry':

     CREATE PROCEDURE p ()
     BEGIN
       DECLARE i INT DEFAULT 3;
       retry:
         REPEAT
           BEGIN
             DECLARE CONTINUE HANDLER FOR SQLWARNING
               BEGIN
                 ITERATE retry;    # illegal
               END;
             IF i < 0 THEN
               LEAVE retry;        # legal
             END IF;
             SET i = i - 1;
           END;
         UNTIL FALSE END REPEAT;
     END;

The `retry' label is in scope for the *Note `IF': if. statement within
the block. It is not in scope for the `CONTINUE' handler, so the
reference there is invalid and results in an error:

     ERROR 1308 (42000): LEAVE with no matching label: retry

To avoid references to outer labels in handlers, use one of these
strategies:

   * To leave the block, use an `EXIT' handler.  If no block cleanup is
     required, the *Note `BEGIN ... END': begin-end. handler body can
     be empty:

          DECLARE EXIT HANDLER FOR SQLWARNING BEGIN END;

     Otherwise, put the cleanup statements in the handler body:

          DECLARE EXIT HANDLER FOR SQLWARNING
            BEGIN
              BLOCK CLEANUP STATEMENTS
            END;

   * To continue execution, set a status variable in a `CONTINUE'
     handler that can be checked in the enclosing block to determine
     whether the handler was invoked. The following example uses the
     variable `done' for this purpose:

          CREATE PROCEDURE p ()
          BEGIN
            DECLARE i INT DEFAULT 3;
            DECLARE done INT DEFAULT FALSE;
            retry:
              REPEAT
                BEGIN
                  DECLARE CONTINUE HANDLER FOR SQLWARNING
                    BEGIN
                      SET done = TRUE;
                    END;
                  IF done OR i < 0 THEN
                    LEAVE retry;
                  END IF;
                  SET i = i - 1;
                END;
              UNTIL FALSE END REPEAT;
          END;


File: manual.info,  Node: resignal,  Next: signal,  Prev: declare-handler,  Up: condition-handling

13.6.7.3 `RESIGNAL' Syntax
..........................

* Menu:

* resignal-alone::               `RESIGNAL' Alone
* resignal-with-new-signal::     `RESIGNAL' with New Signal Information
* resignal-with-condition::      `RESIGNAL' with a Condition Value and Optional New Signal Information
* resignal-handler::             `RESIGNAL' Requires Condition Handler Context

     RESIGNAL [CONDITION_VALUE]
         [SET SIGNAL_INFORMATION_ITEM
         [, SIGNAL_INFORMATION_ITEM] ...]

     CONDITION_VALUE:
         SQLSTATE [VALUE] SQLSTATE_VALUE
       | CONDITION_NAME

     SIGNAL_INFORMATION_ITEM:
         CONDITION_INFORMATION_ITEM_NAME = SIMPLE_VALUE_SPECIFICATION

     CONDITION_INFORMATION_ITEM_NAME:
         CLASS_ORIGIN
       | SUBCLASS_ORIGIN
       | MESSAGE_TEXT
       | MYSQL_ERRNO
       | CONSTRAINT_CATALOG
       | CONSTRAINT_SCHEMA
       | CONSTRAINT_NAME
       | CATALOG_NAME
       | SCHEMA_NAME
       | TABLE_NAME
       | COLUMN_NAME
       | CURSOR_NAME

     CONDITION_NAME, SIMPLE_VALUE_SPECIFICATION:
         (see following discussion)

*Note `RESIGNAL': resignal. passes on the error condition information
that is available during execution of a condition handler within a
compound statement inside a stored procedure or function, trigger, or
event.  *Note `RESIGNAL': resignal. may change some or all information
before passing it on.  *Note `RESIGNAL': resignal. is related to *Note
`SIGNAL': signal, but instead of originating a condition as *Note
`SIGNAL': signal.  does, *Note `RESIGNAL': resignal. relays existing
condition information, possibly after modifying it.

*Note `RESIGNAL': resignal. makes it possible to both handle an error
and return the error information.  Otherwise, by executing an SQL
statement within the handler, information that caused the handler's
activation is destroyed.  *Note `RESIGNAL': resignal. also can make some
procedures shorter if a given handler can handle part of a situation,
then pass the condition `up the line' to another handler.

No special privileges are required to execute the *Note `RESIGNAL':
resignal. statement.

All forms of *Note `RESIGNAL': resignal. require that the current
context be a condition handler. Otherwise, *Note `RESIGNAL': resignal.
is illegal and a `RESIGNAL when handler not active' error occurs.

For CONDITION_VALUE and SIGNAL_INFORMATION_ITEM, the definitions and
rules are the same for *Note `RESIGNAL': resignal. as for *Note
`SIGNAL': signal. For example, the CONDITION_VALUE can be an `SQLSTATE'
value, and the value can indicate errors, warnings, or `not found.' For
additional information, see *Note signal::.

The *Note `RESIGNAL': resignal. statement takes CONDITION_VALUE and
`SET' clauses, both of which are optional. This leads to several
possible uses:

   * *Note `RESIGNAL': resignal. alone:

          RESIGNAL;

   * *Note `RESIGNAL': resignal. with new signal information:

          RESIGNAL SET SIGNAL_INFORMATION_ITEM [, SIGNAL_INFORMATION_ITEM] ...;

   * *Note `RESIGNAL': resignal. with a condition value and possibly
     new signal information:

          RESIGNAL CONDITION_VALUE
              [SET SIGNAL_INFORMATION_ITEM [, SIGNAL_INFORMATION_ITEM] ...];

These use cases all cause changes to the diagnostics and condition
areas:

   * A diagnostics area contains one or more condition areas.

   * A condition area contains condition information items, such as the
     `SQLSTATE' value, `MYSQL_ERRNO', or `MESSAGE_TEXT'.

The maximum number of condition areas in a diagnostics area is
determined by the value of the `max_error_count' system variable.


File: manual.info,  Node: resignal-alone,  Next: resignal-with-new-signal,  Prev: resignal,  Up: resignal

13.6.7.4 `RESIGNAL' Alone
.........................

A simple *Note `RESIGNAL': resignal. alone means `pass on the error
with no change.' It restores the last diagnostics area and makes it the
current diagnostics area. That is, it `pops' the diagnostics area stack.

Within a condition handler that catches a condition, one use for *Note
`RESIGNAL': resignal. alone is to perform some other actions, and then
pass on without change the original condition information (the
information that existed before entry into the handler).

Example:

     DROP TABLE IF EXISTS xx;
     delimiter //
     CREATE PROCEDURE p ()
     BEGIN
       DECLARE EXIT HANDLER FOR SQLEXCEPTION
       BEGIN
         SET @error_count = @error_count + 1;
         IF @a = 0 THEN RESIGNAL; END IF;
       END;
       DROP TABLE xx;
     END//
     delimiter ;
     SET @error_count = 0;
     SET @a = 0;
     CALL p();

Suppose that the `DROP TABLE xx' statement fails. The diagnostics area
stack looks like this:

     DA 1. ERROR 1051 (42S02): Unknown table 'xx'

Then execution enters the `EXIT' handler. It starts by pushing a
diagnostics area to the top of the stack, which now looks like this:

     DA 1. ERROR 1051 (42S02): Unknown table 'xx'
     DA 2. ERROR 1051 (42S02): Unknown table 'xx'

Usually a procedure statement clears the first diagnostics area (also
called the `current' diagnostics area). `BEGIN' is an exception, it
does not clear, it does nothing. `SET' is not an exception, it clears,
performs the operation, and produces a result of `success.' The
diagnostics area stack now looks like this:

     DA 1. ERROR 0000 (00000): Successful operation
     DA 2. ERROR 1051 (42S02): Unknown table 'xx'

At this point, if `@a = 0', *Note `RESIGNAL': resignal. pops the
diagnostics area stack, which now looks like this:

     DA 1. ERROR 1051 (42S02): Unknown table 'xx'

And that is what the caller sees.

If `@a' is not 0, the handler simply ends, which means that there is no
more use for the current diagnostics area (it has been `handled'), so it
can be thrown away, causing the stacked diagnostics area to become the
current diagnostics area again. The diagnostics area stack looks like
this:

     DA 1. ERROR 0000 (00000): Successful operation

The details make it look complex, but the end result is quite useful:
Handlers can execute without destroying information about the condition
that caused activation of the handler.


File: manual.info,  Node: resignal-with-new-signal,  Next: resignal-with-condition,  Prev: resignal-alone,  Up: resignal

13.6.7.5 `RESIGNAL' with New Signal Information
...............................................

*Note `RESIGNAL': resignal. with a `SET' clause provides new signal
information, so the statement means `pass on the error with changes':

     RESIGNAL SET SIGNAL_INFORMATION_ITEM [, SIGNAL_INFORMATION_ITEM] ...;

As with *Note `RESIGNAL': resignal. alone, the idea is to pop the
diagnostics area stack so that the original information will go out.
Unlike *Note `RESIGNAL': resignal. alone, anything specified in the
`SET' clause changes.

Example:

     DROP TABLE IF EXISTS xx;
     delimiter //
     CREATE PROCEDURE p ()
     BEGIN
       DECLARE EXIT HANDLER FOR SQLEXCEPTION
       BEGIN
         SET @error_count = @error_count + 1;
         IF @a = 0 THEN RESIGNAL SET MYSQL_ERRNO = 5; END IF;
       END;
       DROP TABLE xx;
     END//
     delimiter ;
     SET @error_count = 0;
     SET @a = 0;
     CALL p();

Remember from the previous discussion that *Note `RESIGNAL': resignal.
alone results in a diagnostics area stack like this:

     DA 1. ERROR 1051 (42S02): Unknown table 'xx'

The `RESIGNAL SET MYSQL_ERRNO = 5' statement results in this stack
instead, which is what the caller sees:

     DA 1. ERROR 5 (42S02): Unknown table 'xx'

In other words, it changes the error number, and nothing else.

The *Note `RESIGNAL': resignal. statement can change any or all of the
signal information items, making the first condition area of the
diagnostics area look quite different.


File: manual.info,  Node: resignal-with-condition,  Next: resignal-handler,  Prev: resignal-with-new-signal,  Up: resignal

13.6.7.6 `RESIGNAL' with a Condition Value and Optional New Signal Information
..............................................................................

*Note `RESIGNAL': resignal. with a condition value means `push a
condition into the current diagnostics area.' If the `SET' clause is
present, it also changes the error information.

     RESIGNAL CONDITION_VALUE
         [SET SIGNAL_INFORMATION_ITEM [, SIGNAL_INFORMATION_ITEM] ...];

This form of *Note `RESIGNAL': resignal. restores the last diagnostics
area and makes it the current diagnostics area. That is, it `pops' the
diagnostics area stack, which is the same as what a simple *Note
`RESIGNAL': resignal. alone would do.  However, it also changes the
diagnostics area depending on the condition value or signal information.

Example:

     DROP TABLE IF EXISTS xx;
     delimiter //
     CREATE PROCEDURE p ()
     BEGIN
       DECLARE EXIT HANDLER FOR SQLEXCEPTION
       BEGIN
         SET @error_count = @error_count + 1;
         IF @a = 0 THEN RESIGNAL SQLSTATE '45000' SET MYSQL_ERRNO=5; END IF;
       END;
       DROP TABLE xx;
     END//
     delimiter ;
     SET @error_count = 0;
     SET @a = 0;
     SET @@max_error_count = 2;
     CALL p();
     SHOW ERRORS;

This is similar to the previous example, and the effects are the same,
except that if *Note `RESIGNAL': resignal. happens, the current
condition area looks different at the end. (The reason the condition
adds to rather than replaces the existing condition is the use of a
condition value.)

The *Note `RESIGNAL': resignal. statement includes a condition value
(`SQLSTATE '45000''), so it adds a new condition area, resulting in a
diagnostics area stack that looks like this:

     DA 1. (condition 2) ERROR 1051 (42S02): Unknown table 'xx'
           (condition 1) ERROR 5 (45000) Unknown table 'xx'

The result of *Note `CALL p()': call. and *Note `SHOW ERRORS':
show-errors.  for this example is:

     mysql> CALL p();
     ERROR 5 (45000): Unknown table 'xx'
     mysql> SHOW ERRORS;
     +-------+------+----------------------------------+
     | Level | Code | Message                          |
     +-------+------+----------------------------------+
     | Error | 1051 | Unknown table 'xx'               |
     | Error |    5 | Unknown table 'xx'               |
     +-------+------+----------------------------------+


File: manual.info,  Node: resignal-handler,  Prev: resignal-with-condition,  Up: resignal

13.6.7.7 `RESIGNAL' Requires Condition Handler Context
......................................................

All forms of *Note `RESIGNAL': resignal. require that the current
context be a condition handler. Otherwise, *Note `RESIGNAL': resignal.
is illegal and a `RESIGNAL when handler not active' error occurs. For
example:

     mysql> CREATE PROCEDURE p () RESIGNAL;
     Query OK, 0 rows affected (0.00 sec)

     mysql> CALL p();
     ERROR 1645 (0K000): RESIGNAL when handler not active

Here is a more difficult example:

     delimiter //
     CREATE FUNCTION f () RETURNS INT
     BEGIN
       RESIGNAL;
       RETURN 5;
     END//
     CREATE PROCEDURE p ()
     BEGIN
       DECLARE EXIT HANDLER FOR SQLEXCEPTION SET @a=f();
       SIGNAL SQLSTATE '55555';
     END//
     delimiter ;
     CALL p();

*Note `RESIGNAL': resignal. occurs within the stored function `f()',
which is invoked from within the `EXIT' handler. Thus, a handler is
active at the time *Note `RESIGNAL': resignal.  executes, even though
*Note `RESIGNAL': resignal.  is not defined inside the handler.


File: manual.info,  Node: signal,  Prev: resignal,  Up: condition-handling

13.6.7.8 `SIGNAL' Syntax
........................

* Menu:

* signal-condition-information-items::  Signal Condition Information Items
* signal-effects::               Effect of Signals on Handlers, Cursors, and Statements

     SIGNAL CONDITION_VALUE
         [SET SIGNAL_INFORMATION_ITEM
         [, SIGNAL_INFORMATION_ITEM] ...]

     CONDITION_VALUE:
         SQLSTATE [VALUE] SQLSTATE_VALUE
       | CONDITION_NAME

     SIGNAL_INFORMATION_ITEM:
         CONDITION_INFORMATION_ITEM_NAME = SIMPLE_VALUE_SPECIFICATION

     CONDITION_INFORMATION_ITEM_NAME:
         CLASS_ORIGIN
       | SUBCLASS_ORIGIN
       | MESSAGE_TEXT
       | MYSQL_ERRNO
       | CONSTRAINT_CATALOG
       | CONSTRAINT_SCHEMA
       | CONSTRAINT_NAME
       | CATALOG_NAME
       | SCHEMA_NAME
       | TABLE_NAME
       | COLUMN_NAME
       | CURSOR_NAME

     CONDITION_NAME, SIMPLE_VALUE_SPECIFICATION:
         (see following discussion)

*Note `SIGNAL': signal. is the way to `return' an error.  *Note
`SIGNAL': signal. provides error information to a handler, to an outer
portion of the application, or to the client. Also, it provides control
over the error's characteristics (error number, `SQLSTATE' value,
message). Without *Note `SIGNAL': signal, it is necessary to resort to
workarounds such as deliberately referring to a nonexistent table to
cause a routine to return an error.

No special privileges are required to execute the *Note `SIGNAL':
signal. statement.

The CONDITION_VALUE in a *Note `SIGNAL': signal. statement indicates the
error value to be returned. It can be an `SQLSTATE' value (a
5-character string literal) or a CONDITION_NAME that refers to a named
condition previously defined with *Note `DECLARE ... CONDITION':
declare-condition. (see *Note declare-condition::).

An `SQLSTATE' value can indicate errors, warnings, or `not found.' The
first two characters of the value indicate its error class, as
discussed in *Note signal-condition-information-items::. Some signal
values cause statement termination; see *Note signal-effects::.

The `SQLSTATE' value for a *Note `SIGNAL': signal. statement should not
start with `'00'' because such values indicate success and are not
valid for signaling an error. This is true whether the `SQLSTATE' value
is specified directly in the *Note `SIGNAL': signal. statement or in a
named condition referred to in the statement. If the value is invalid,
a `Bad SQLSTATE' error occurs.

To signal a generic `SQLSTATE' value, use `'45000'', which means
`unhandled user-defined exception.'

The *Note `SIGNAL': signal. statement optionally includes a `SET'
clause that contains multiple signal items, in a comma-separated list of
CONDITION_INFORMATION_ITEM_NAME = SIMPLE_VALUE_SPECIFICATION
assignments.

Each CONDITION_INFORMATION_ITEM_NAME may be specified only once in the
`SET' clause.  Otherwise, a `Duplicate condition information item'
error occurs.

Valid SIMPLE_VALUE_SPECIFICATION designators can be specified using
stored procedure or function parameters, stored program local variables
declared with *Note `DECLARE': declare, user-defined variables, system
variables, or literals. A character literal may include a _CHARSET
introducer.

For information about permissible CONDITION_INFORMATION_ITEM_NAME
values, see *Note signal-condition-information-items::.

The following procedure signals an error or warning depending on the
value of `pval', its input parameter:

     CREATE PROCEDURE p (pval INT)
     BEGIN
       DECLARE specialty CONDITION FOR SQLSTATE '45000';
       IF pval = 0 THEN
         SIGNAL SQLSTATE '01000';
       ELSEIF pval = 1 THEN
         SIGNAL SQLSTATE '45000'
           SET MESSAGE_TEXT = 'An error occurred';
       ELSEIF pval = 2 THEN
         SIGNAL specialty
           SET MESSAGE_TEXT = 'An error occurred';
       ELSE
         SIGNAL SQLSTATE '01000'
           SET MESSAGE_TEXT = 'A warning occurred', MYSQL_ERRNO = 1000;
         SIGNAL SQLSTATE '45000'
           SET MESSAGE_TEXT = 'An error occurred', MYSQL_ERRNO = 1001;
       END IF;
     END;

If `pval' is 0, `p()' signals a warning because `SQLSTATE' values that
begin with `'01'' are signals in the warning class.  The warning does
not terminate the procedure, and can be seen with *Note `SHOW
WARNINGS': show-warnings. after the procedure returns.

If `pval' is 1, `p()' signals an error and sets the `MESSAGE_TEXT'
condition information item. The error terminates the procedure, and the
text is returned with the error information.

If `pval' is 2, the same error is signaled, although the `SQLSTATE'
value is specified using a named condition in this case.

If `pval' is anything else, `p()' first signals a warning and sets the
message text and error number condition information items. This warning
does not terminate the procedure, so execution continues and `p()' then
signals an error. The error does terminate the procedure. The message
text and error number set by the warning are replaced by the values set
by the error, which are returned with the error information.

*Note `SIGNAL': signal. is typically used within stored programs, but
it is a MySQL extension that it is permitted outside handler context.
For example, if you invoke the *Note `mysql': mysql. client program,
you can enter any of these statements at the prompt:

     mysql> SIGNAL SQLSTATE '77777';
     mysql> CREATE TRIGGER t_bi BEFORE INSERT ON t
         -> FOR EACH ROW SIGNAL SQLSTATE '77777';
     mysql> CREATE EVENT e ON SCHEDULE EVERY 1 SECOND
         -> DO SIGNAL SQLSTATE '77777';

*Note `SIGNAL': signal. executes according to the following rules:

If the *Note `SIGNAL': signal. statement indicates a particular
`SQLSTATE' value, that value is used to signal the condition specified.
Example:

     CREATE PROCEDURE p (divisor INT)
     BEGIN
       IF divisor = 0 THEN
         SIGNAL SQLSTATE '22012';
       END IF;
     END;

If the *Note `SIGNAL': signal. statement uses a named condition, the
condition must be declared in some scope that applies to the *Note
`SIGNAL': signal.  statement, and must be defined using an `SQLSTATE'
value, not a MySQL error number.  Example:

     CREATE PROCEDURE p (divisor INT)
     BEGIN
       DECLARE divide_by_zero CONDITION FOR SQLSTATE '22012';
       IF divisor = 0 THEN
         SIGNAL divide_by_zero;
       END IF;
     END;

If the named condition does not exist in the scope of the *Note
`SIGNAL': signal. statement, an `Undefined CONDITION' error occurs.

If *Note `SIGNAL': signal. refers to a named condition that is defined
with a MySQL error number rather than an `SQLSTATE' value, a
`SIGNAL/RESIGNAL can only use a CONDITION defined with SQLSTATE' error
occurs. The following statements cause that error because the named
condition is associated with a MySQL error number:

     DECLARE no_such_table CONDITION FOR 1051;
     SIGNAL no_such_table;

If a condition with a given name is declared multiple times in
different scopes, the declaration with the most local scope applies.
Consider the following procedure:

     CREATE PROCEDURE p (divisor INT)
     BEGIN
       DECLARE my_error CONDITION FOR SQLSTATE '45000';
       IF divisor = 0 THEN
         BEGIN
           DECLARE my_error CONDITION FOR SQLSTATE '22012';
           SIGNAL my_error;
         END;
       END IF;
       SIGNAL my_error;
     END;

If `divisor' is 0, the first *Note `SIGNAL': signal. statement
executes. The innermost `my_error' condition declaration applies,
raising `SQLSTATE' `'22012''.

If `divisor' is not 0, the second *Note `SIGNAL': signal. statement
executes. The outermost `my_error' condition declaration applies,
raising `SQLSTATE' `'45000''.

Signals can be raised within exception handlers:

     CREATE PROCEDURE p ()
     BEGIN
       DECLARE EXIT HANDLER FOR SQLEXCEPTION
       BEGIN
         SIGNAL SQLSTATE VALUE '99999'
           SET MESSAGE_TEXT = 'An error occurred';
       END;
       DROP TABLE no_such_table;
     END;

`CALL p()' reaches the *Note `DROP TABLE': drop-table. statement. There
is no table named `no_such_table', so the error handler is activated.
The error handler destroys the original error (`no such table') and
makes a new error with `SQLSTATE' `'99999'' and message `An error
occurred'.


File: manual.info,  Node: signal-condition-information-items,  Next: signal-effects,  Prev: signal,  Up: signal

13.6.7.9 Signal Condition Information Items
...........................................

The following table lists the names of diagnostics area condition
information items that can be set in a *Note `SIGNAL': signal. (or
*Note `RESIGNAL': resignal.) statement. All items are standard SQL
except `MYSQL_ERRNO', which is a MySQL extension.

     Item Name             Definition
     ---------             ----------
     CLASS_ORIGIN          VARCHAR(64)
     SUBCLASS_ORIGIN       VARCHAR(64)
     CONSTRAINT_CATALOG    VARCHAR(64)
     CONSTRAINT_SCHEMA     VARCHAR(64)
     CONSTRAINT_NAME       VARCHAR(64)
     CATALOG_NAME          VARCHAR(64)
     SCHEMA_NAME           VARCHAR(64)
     TABLE_NAME            VARCHAR(64)
     COLUMN_NAME           VARCHAR(64)
     CURSOR_NAME           VARCHAR(64)
     MESSAGE_TEXT          VARCHAR(128)
     MYSQL_ERRNO           SMALLINT UNSIGNED

The character set for character items is UTF-8.

It is illegal to assign `NULL' to a condition information item in a
*Note `SIGNAL': signal.  statement.

A *Note `SIGNAL': signal. statement always specifies an `SQLSTATE'
value, either directly, or indirectly by referring to a named condition
defined with an `SQLSTATE' value. The first two characters of an
`SQLSTATE' value are its class, and the class determines the default
value for the condition information items:

   * Class = `'00'' (success)

     Illegal. `SQLSTATE' values that begin with `'00'' indicate success
     and are not valid for *Note `SIGNAL': signal.

   * Class = `'01'' (warning)

          MESSAGE_TEXT = 'Unhandled user-defined warning condition';
          MYSQL_ERRNO = `ER_SIGNAL_WARN'

   * Class = `'02'' (not found)

          MESSAGE_TEXT = 'Unhandled user-defined not found condition';
          MYSQL_ERRNO = `ER_SIGNAL_NOT_FOUND'

   * Class > `'02'' (exception)

          MESSAGE_TEXT = 'Unhandled user-defined exception condition';
          MYSQL_ERRNO = `ER_SIGNAL_EXCEPTION'

For legal classes, the other condition information items are set as
follows:

     CLASS_ORIGIN = SUBCLASS_ORIGIN = '';
     CONSTRAINT_CATALOG = CONSTRAINT_SCHEMA = CONSTRAINT_NAME = '';
     CATALOG_NAME = SCHEMA_NAME = TABLE_NAME = COLUMN_NAME = '';
     CURSOR_NAME = '';

The error values that are accessible after *Note `SIGNAL': signal.
executes are the `SQLSTATE' value raised by the *Note `SIGNAL': signal.
statement and the `MESSAGE_TEXT' and `MYSQL_ERRNO' items. These values
are available from the C API:

   * `SQLSTATE' value: Call *Note `mysql_sqlstate()': mysql-sqlstate.

   * `MYSQL_ERRNO' value: Call *Note `mysql_errno()': mysql-errno.

   * `MESSAGE_TEXT' value: Call *Note `mysql_error()': mysql-error.

From SQL, the output from *Note `SHOW WARNINGS': show-warnings. and
*Note `SHOW ERRORS': show-errors. indicates the `MYSQL_ERRNO' and
`MESSAGE_TEXT' values in the `Code' and `Message' columns.

Other condition information items can be set, but currently have no
effect, in the sense that they are not accessible from error returns.
For example, you can set `CLASS_ORIGIN' in a *Note `SIGNAL': signal.
statement, but cannot see it after *Note `SIGNAL': signal. executes.
In MySQL 5.6, condition information can be inspected with the `GET
DIAGNOSTICS' statement.


File: manual.info,  Node: signal-effects,  Prev: signal-condition-information-items,  Up: signal

13.6.7.10 Effect of Signals on Handlers, Cursors, and Statements
................................................................

Signals have different effects on statement execution depending on the
signal class. The class determines how severe an error is. MySQL
ignores the value of the `sql_mode' system variable; in particular,
strict SQL mode does not matter. MySQL also ignores `IGNORE': The
intent of *Note `SIGNAL': signal. is to raise a user-generated error
explicitly, so a signal is never ignored.

In the following descriptions, `unhandled' means that no handler for
the signaled `SQLSTATE' value has been defined with *Note `DECLARE ...
HANDLER': declare-handler.

   * Class = `'00'' (success)

     Illegal. `SQLSTATE' values that begin with `'00'' indicate success
     and are not valid for *Note `SIGNAL': signal.

   * Class = `'01'' (warning)

     The value of the `warning_count' system variable goes up. *Note
     `SHOW WARNINGS': show-warnings. shows the signal.  `SQLWARNING'
     handlers catch the signal.  If the signal is unhandled in a
     function, statements do not end.

   * Class = `'02'' (not found)

     `NOT FOUND' handlers catch the signal.  There is no effect on
     cursors. If the signal is unhandled in a function, statements end.

   * Class > `'02'' (exception)

     `SQLEXCEPTION' handlers catch the signal.  If the signal is
     unhandled in a function, statements end.

   * Class = `'40''

     Treated as an ordinary exception.

Example:

     mysql> delimiter //
     mysql> CREATE FUNCTION f () RETURNS INT
         -> BEGIN
         ->   SIGNAL SQLSTATE '01234';  -- signal a warning
         ->   RETURN 5;
         -> END//
     mysql> delimiter ;
     mysql> CREATE TABLE t (s1 INT);
     mysql> INSERT INTO t VALUES (f());

The result is that a row containing 5 is inserted into table `t'. The
warning that is signaled can be viewed with *Note `SHOW WARNINGS':
show-warnings.


File: manual.info,  Node: sql-syntax-server-administration,  Next: sql-syntax-utility,  Prev: sql-syntax-compound-statements,  Up: sql-syntax

13.7 Database Administration Statements
=======================================

* Menu:

* account-management-sql::       Account Management Statements
* table-maintenance-sql::        Table Maintenance Statements
* plugin-sql::                   Plugin and User-Defined Function Statements
* set-statement::                `SET' Syntax
* show::                         `SHOW' Syntax
* other-administrative-sql::     Other Administrative Statements


File: manual.info,  Node: account-management-sql,  Next: table-maintenance-sql,  Prev: sql-syntax-server-administration,  Up: sql-syntax-server-administration

13.7.1 Account Management Statements
------------------------------------

* Menu:

* create-user::                  `CREATE USER' Syntax
* drop-user::                    `DROP USER' Syntax
* grant::                        `GRANT' Syntax
* rename-user::                  `RENAME USER' Syntax
* revoke::                       `REVOKE' Syntax
* set-password::                 `SET PASSWORD' Syntax

MySQL account information is stored in the tables of the `mysql'
database. This database and the access control system are discussed
extensively in *Note server-administration::, which you should consult
for additional details.

*Important*:

Some releases of MySQL introduce changes to the structure of the grant
tables to add new privileges or features. Whenever you update to a new
version of MySQL, you should update your grant tables to make sure that
they have the current structure so that you can take advantage of any
new capabilities. See *Note mysql-upgrade::.


File: manual.info,  Node: create-user,  Next: drop-user,  Prev: account-management-sql,  Up: account-management-sql

13.7.1.1 `CREATE USER' Syntax
.............................

     CREATE USER USER_SPECIFICATION
         [, USER_SPECIFICATION] ...

     USER_SPECIFICATION:
         USER
         [
             IDENTIFIED BY [PASSWORD] 'PASSWORD'
           | IDENTIFIED WITH AUTH_PLUGIN [AS 'AUTH_STRING']
         ]

The *Note `CREATE USER': create-user. statement creates new MySQL
accounts. To use it, you must have the global `CREATE USER' privilege
or the `INSERT' privilege for the `mysql' database. For each account,
*Note `CREATE USER': create-user. creates a new row in the `mysql.user'
table and assigns the account no privileges. An error occurs if the
account already exists.

Each account name uses the format described in *Note account-names::.
For example:

     CREATE USER 'jeffrey'@'localhost' IDENTIFIED BY 'mypass';

If you specify only the user name part of the account name, a host name
part of `'%'' is used.

The user specification may indicate how the user should authenticate
when connecting to the server:

   * To enable the user to connect with no password (which is
     _insecure_), include no `IDENTIFIED BY' clause:

          CREATE USER 'jeffrey'@'localhost';

     In this case, the account uses built-in authentication and clients
     must provide no password.

   * To assign a password, use `IDENTIFIED BY' with the literal
     plaintext password value:

          CREATE USER 'jeffrey'@'localhost' IDENTIFIED BY 'mypass';

     The account uses built-in authentication and clients must match
     the given password.

   * To avoid specifying the plaintext password if you know its hash
     value (the value that `PASSWORD()' would return for the password),
     specify the hash value preceded by the keyword `PASSWORD':

          CREATE USER 'jeffrey'@'localhost'
          IDENTIFIED BY PASSWORD '*90E462C37378CED12064BB3388827D2BA3A9B689';

     The account uses built-in authentication and clients must match
     the given password.

   * To authenticate the account using a specific authentication
     plugin, use `IDENTIFIED WITH', where AUTH_PLUGIN is the plugin
     name.  It can be an unquoted name or a quoted string literal.
     `'AUTH_STRING'' is an optional quoted string literal to pass to
     the plugin.  The plugin interprets the meaning of the string, so
     its format is plugin specific. Consult the documentation for a
     given plugin for information about the authentication string
     values it accepts.

          CREATE USER 'jeffrey'@'localhost'
          IDENTIFIED WITH my_auth_plugin;

     For connections that use this account, the server invokes the
     named plugin and clients must provide credentials as required for
     the authentication method that the plugin implements. If the
     server cannot find the plugin, either at account-creation time or
     connect time, an error occurs.  `IDENTIFIED WITH' can be used as
     of MySQL 5.5.7.

The `IDENTIFIED BY' and `IDENTIFIED WITH' clauses are mutually
exclusive, so at most one of them can be specified for a given user.

For additional information about setting passwords, see *Note
assigning-passwords::.

*Important*:

*Note `CREATE USER': create-user. may be recorded in server logs or in
a history file such as `~/.mysql_history', which means that cleartext
passwords may be read by anyone having read access to that information.
See *Note password-security::.

*Important*:

Some releases of MySQL introduce changes to the structure of the grant
tables to add new privileges or features. Whenever you update to a new
version of MySQL, you should update your grant tables to make sure that
they have the current structure so that you can take advantage of any
new capabilities. See *Note mysql-upgrade::.


File: manual.info,  Node: drop-user,  Next: grant,  Prev: create-user,  Up: account-management-sql

13.7.1.2 `DROP USER' Syntax
...........................

     DROP USER USER [, USER] ...

The *Note `DROP USER': drop-user. statement removes one or more MySQL
accounts and their privileges. It removes privilege rows for the
account from all grant tables. To use this statement, you must have the
global `CREATE USER' privilege or the `DELETE' privilege for the
`mysql' database. Each account name uses the format described in *Note
account-names::. For example:

     DROP USER 'jeffrey'@'localhost';

If you specify only the user name part of the account name, a host name
part of `'%'' is used.

*Important*:

*Note `DROP USER': drop-user. does not automatically close any open
user sessions. Rather, in the event that a user with an open session is
dropped, the statement does not take effect until that user's session is
closed. Once the session is closed, the user is dropped, and that
user's next attempt to log in will fail. _This is by design_.

*Note `DROP USER': drop-user. does not automatically drop or invalidate
databases or objects within them that the old user created. This
includes stored programs or views for which the `DEFINER' attribute
names the dropped user.  Attempts to access such objects may produce an
error if they execute in definer security context. (For information
about security context, see *Note stored-programs-security::.)


File: manual.info,  Node: grant,  Next: rename-user,  Prev: drop-user,  Up: account-management-sql

13.7.1.3 `GRANT' Syntax
.......................

     GRANT
         PRIV_TYPE [(COLUMN_LIST)]
           [, PRIV_TYPE [(COLUMN_LIST)]] ...
         ON [OBJECT_TYPE] PRIV_LEVEL
         TO USER_SPECIFICATION [, USER_SPECIFICATION] ...
         [REQUIRE {NONE | SSL_OPTION [[AND] SSL_OPTION] ...}]
         [WITH WITH_OPTION ...]

     GRANT PROXY ON USER_SPECIFICATION
         TO USER_SPECIFICATION [, USER_SPECIFICATION] ...
         [WITH GRANT OPTION]

     OBJECT_TYPE:
         TABLE
       | FUNCTION
       | PROCEDURE

     PRIV_LEVEL:
         *
       | *.*
       | DB_NAME.*
       | DB_NAME.TBL_NAME
       | TBL_NAME
       | DB_NAME.ROUTINE_NAME

     USER_SPECIFICATION:
         USER
         [
             IDENTIFIED BY [PASSWORD] 'PASSWORD'
           | IDENTIFIED WITH AUTH_PLUGIN [AS 'AUTH_STRING']
         ]

     SSL_OPTION:
         SSL
       | X509
       | CIPHER 'CIPHER'
       | ISSUER 'ISSUER'
       | SUBJECT 'SUBJECT'

     WITH_OPTION:
         GRANT OPTION
       | MAX_QUERIES_PER_HOUR COUNT
       | MAX_UPDATES_PER_HOUR COUNT
       | MAX_CONNECTIONS_PER_HOUR COUNT
       | MAX_USER_CONNECTIONS COUNT

The *Note `GRANT': grant. statement grants privileges to MySQL user
accounts.  *Note `GRANT': grant. also serves to specify other account
characteristics such as use of secure connections and limits on access
to server resources. To use *Note `GRANT': grant, you must have the
`GRANT OPTION' privilege, and you must have the privileges that you are
granting.

Normally, a database administrator first uses *Note `CREATE USER':
create-user. to create an account, then *Note `GRANT': grant. to define
its privileges and characteristics. For example:

     CREATE USER 'jeffrey'@'localhost' IDENTIFIED BY 'mypass';
     GRANT ALL ON db1.* TO 'jeffrey'@'localhost';
     GRANT SELECT ON db2.invoice TO 'jeffrey'@'localhost';
     GRANT USAGE ON *.* TO 'jeffrey'@'localhost' WITH MAX_QUERIES_PER_HOUR 90;

However, if an account named in a *Note `GRANT': grant. statement does
not already exist, *Note `GRANT': grant. may create it under the
conditions described later in the discussion of the
`NO_AUTO_CREATE_USER' SQL mode.

The *Note `REVOKE': revoke. statement is related to *Note `GRANT':
grant. and enables administrators to remove account privileges. See
*Note revoke::.

When successfully executed from the *Note `mysql': mysql.  program,
*Note `GRANT': grant. responds with `Query OK, 0 rows affected'. To
determine what privileges result from the operation, use *Note `SHOW
GRANTS': show-grants. See *Note show-grants::.

There are several aspects to the `GRANT' statement, described under the
following topics in this section:

   * Privileges Supported by MySQL

   * Global Privileges

   * Database Privileges

   * Table Privileges

   * Column Privileges

   * Stored Routine Privileges

   * Proxy User Privileges

   * Account Names and Passwords

   * Other Account Characteristics

   * MySQL and Standard SQL Versions of *Note `GRANT': grant.

*Important*:

Some releases of MySQL introduce changes to the structure of the grant
tables to add new privileges or features. Whenever you update to a new
version of MySQL, you should update your grant tables to make sure that
they have the current structure so that you can take advantage of any
new capabilities. See *Note mysql-upgrade::.

* Privileges Supported by MySQL *

The following table summarizes the permissible PRIV_TYPE privilege
types that can be specified for the *Note `GRANT': grant. and *Note
`REVOKE': revoke. statements. For additional information about these
privileges, see *Note privileges-provided::.

*Permissible Privileges for `GRANT' and `REVOKE'*

Privilege              Meaning
`ALL [PRIVILEGES]'     Grant all privileges at specified access level
                       except `GRANT OPTION'
`ALTER'                Enable use of *Note `ALTER TABLE': alter-table.
`ALTER ROUTINE'        Enable stored routines to be altered or dropped
`CREATE'               Enable database and table creation
`CREATE ROUTINE'       Enable stored routine creation
`CREATE TABLESPACE'    Enable tablespaces and log file groups to be
                       created, altered, or dropped
`CREATE TEMPORARY      Enable use of *Note `CREATE TEMPORARY TABLE':
TABLES'                create-table.
`CREATE USER'          Enable use of *Note `CREATE USER': create-user,
                       *Note `DROP USER': drop-user, *Note `RENAME
                       USER': rename-user, and *Note `REVOKE ALL
                       PRIVILEGES': revoke.
`CREATE VIEW'          Enable views to be created or altered
`DELETE'               Enable use of *Note `DELETE': delete.
`DROP'                 Enable databases, tables, and views to be dropped
`EVENT'                Enable use of events for the Event Scheduler
`EXECUTE'              Enable the user to execute stored routines
`FILE'                 Enable the user to cause the server to read or
                       write files
`GRANT OPTION'         Enable privileges to be granted to or removed
                       from other accounts
`INDEX'                Enable indexes to be created or dropped
`INSERT'               Enable use of *Note `INSERT': insert.
`LOCK TABLES'          Enable use of *Note `LOCK TABLES': lock-tables.
                       on tables for which you have the *Note `SELECT':
                       select.  privilege
`PROCESS'              Enable the user to see all processes with *Note
                       `SHOW PROCESSLIST': show-processlist.
`PROXY'                Enable user proxying
`REFERENCES'           Not implemented
`RELOAD'               Enable use of *Note `FLUSH': flush. operations
`REPLICATION CLIENT'   Enable the user to ask where master or slave
                       servers are
`REPLICATION SLAVE'    Enable replication slaves to read binary log
                       events from the master
`SELECT'               Enable use of *Note `SELECT': select.
`SHOW DATABASES'       Enable *Note `SHOW DATABASES': show-databases. to
                       show all databases
`SHOW VIEW'            Enable use of *Note `SHOW CREATE VIEW':
                       show-create-view.
`SHUTDOWN'             Enable use of *Note `mysqladmin shutdown':
                       mysqladmin.
`SUPER'                Enable use of other administrative operations
                       such as *Note `CHANGE MASTER TO':
                       change-master-to, *Note `KILL': kill, *Note
                       `PURGE BINARY LOGS': purge-binary-logs, *Note
                       `SET GLOBAL': set-statement, and *Note
                       `mysqladmin debug': mysqladmin. command
`TRIGGER'              Enable trigger operations
`UPDATE'               Enable use of *Note `UPDATE': update.
`USAGE'                Synonym for `no privileges'

The `PROXY' privilege was added in MySQL 5.5.7.

A trigger is associated with a table, so to create or drop a trigger,
you must have the `TRIGGER' privilege for the table, not the trigger.

In *Note `GRANT': grant. statements, the `ALL [PRIVILEGES]' or `PROXY'
privilege must be named by itself and cannot be specified along with
other privileges.  `ALL [PRIVILEGES]' stands for all privileges
available for the level at which privileges are to be granted except
for the `GRANT OPTION' and `PROXY' privileges.

`USAGE' can be specified to create a user that has no privileges, or to
specify the `REQUIRE' or `WITH' clauses for an account without changing
its existing privileges.

MySQL account information is stored in the tables of the `mysql'
database. This database and the access control system are discussed
extensively in *Note privilege-system::, which you should consult for
additional details.

If the grant tables hold privilege rows that contain mixed-case
database or table names and the `lower_case_table_names' system
variable is set to a nonzero value, *Note `REVOKE': revoke. cannot be
used to revoke these privileges. It will be necessary to manipulate the
grant tables directly. (*Note `GRANT': grant. will not create such rows
when `lower_case_table_names' is set, but such rows might have been
created prior to setting that variable.)

Privileges can be granted at several levels, depending on the syntax
used for the `ON' clause. For *Note `REVOKE': revoke, the same `ON'
syntax specifies which privileges to take away. The examples shown here
include no `IDENTIFIED BY 'PASSWORD'' clause for brevity, but you
should include one if the account does not already exist, to avoid
creating an insecure account that has no password.

* Global Privileges *

Global privileges are administrative or apply to all databases on a
given server. To assign global privileges, use `ON *.*' syntax:

     GRANT ALL ON *.* TO 'someuser'@'somehost';
     GRANT SELECT, INSERT ON *.* TO 'someuser'@'somehost';

The `CREATE TABLESPACE', `CREATE USER', `FILE', `PROCESS', `RELOAD',
`REPLICATION CLIENT', `REPLICATION SLAVE', `SHOW DATABASES',
`SHUTDOWN', and `SUPER' privileges are administrative and can only be
granted globally.

Other privileges can be granted globally or at more specific levels.

MySQL stores global privileges in the `mysql.user' table.

* Database Privileges *

Database privileges apply to all objects in a given database. To assign
database-level privileges, use `ON DB_NAME.*' syntax:

     GRANT ALL ON mydb.* TO 'someuser'@'somehost';
     GRANT SELECT, INSERT ON mydb.* TO 'someuser'@'somehost';

If you use `ON *' syntax (rather than `ON *.*') and you have selected a
default database, privileges are assigned at the database level for the
default database. An error occurs if there is no default database.

The `CREATE', `DROP', `EVENT', `GRANT OPTION', and `LOCK TABLES'
privileges can be specified at the database level. Table or routine
privileges also can be specified at the database level, in which case
they apply to all tables or routines in the database.

MySQL stores database privileges in the `mysql.db' table.

* Table Privileges *

Table privileges apply to all columns in a given table. To assign
table-level privileges, use `ON DB_NAME.TBL_NAME' syntax:

     GRANT ALL ON mydb.mytbl TO 'someuser'@'somehost';
     GRANT SELECT, INSERT ON mydb.mytbl TO 'someuser'@'somehost';

If you specify TBL_NAME rather than DB_NAME.TBL_NAME, the statement
applies to TBL_NAME in the default database. An error occurs if there
is no default database.

The permissible PRIV_TYPE values at the table level are `ALTER',
`CREATE VIEW', `CREATE', `DELETE', `DROP', `GRANT OPTION', `INDEX',
`INSERT', `SELECT', `SHOW VIEW', `TRIGGER', and `UPDATE'.

MySQL stores table privileges in the `mysql.tables_priv' table.

* Column Privileges *

Column privileges apply to single columns in a given table. Each
privilege to be granted at the column level must be followed by the
column or columns, enclosed within parentheses.

     GRANT SELECT (col1), INSERT (col1,col2) ON mydb.mytbl TO 'someuser'@'somehost';

The permissible PRIV_TYPE values for a column (that is, when you use a
COLUMN_LIST clause) are `INSERT', `SELECT', and `UPDATE'.

MySQL stores column privileges in the `mysql.columns_priv' table.

* Stored Routine Privileges *

The `ALTER ROUTINE', `CREATE ROUTINE', `EXECUTE', and `GRANT OPTION'
privileges apply to stored routines (procedures and functions). They
can be granted at the global and database levels. Except for `CREATE
ROUTINE', these privileges can be granted at the routine level for
individual routines.

     GRANT CREATE ROUTINE ON mydb.* TO 'someuser'@'somehost';
     GRANT EXECUTE ON PROCEDURE mydb.myproc TO 'someuser'@'somehost';

The permissible PRIV_TYPE values at the routine level are `ALTER
ROUTINE', `EXECUTE', and `GRANT OPTION'.  `CREATE ROUTINE' is not a
routine-level privilege because you must have this privilege to create
a routine in the first place.

MySQL stores routine-level privileges in the `mysql.procs_priv' table.

* Proxy User Privileges *

The `PROXY' privilege enables one user to be a proxy for another. The
proxy user impersonates or takes the identity of the proxied user.

     GRANT PROXY ON 'localuser'@'localhost' TO 'externaluser'@'somehost';

When `PROXY' is granted, it must be the only privilege named in the
*Note `GRANT': grant. statement, the `REQUIRE' clause cannot be given,
and the only permitted `WITH' option is `WITH GRANT OPTION'.

Proxying requires that the proxy user authenticate through a plugin
that returns the name of the proxied user to the server when the proxy
user connects, and that the proxy user have the `PROXY' privilege for
the proxied user. For details and examples, see *Note proxy-users::.

MySQL stores proxy privileges in the `mysql.proxies_priv' table.

For the global, database, table, and routine levels, *Note `GRANT ALL':
grant.  assigns only the privileges that exist at the level you are
granting. For example, `GRANT ALL ON DB_NAME.*' is a database-level
statement, so it does not grant any global-only privileges such as
`FILE'. Granting `ALL' does not assign the `PROXY' privilege.

The OBJECT_TYPE clause, if present, should be specified as `TABLE',
`FUNCTION', or `PROCEDURE' when the following object is a table, a
stored function, or a stored procedure.

The privileges for a database, table, column, or routine are formed
additively as the logical `OR' of the privileges at each of the
privilege levels. For example, if a user has a global `SELECT'
privilege, the privilege cannot be denied by an absence of the
privilege at the database, table, or column level. Details of the
privilege-checking procedure are presented in *Note request-access::.

MySQL enables you to grant privileges on databases or tables that do
not exist. For tables, the privileges to be granted must include the
`CREATE' privilege.  _This behavior is by design_, and is intended to
enable the database administrator to prepare user accounts and
privileges for databases or tables that are to be created at a later
time.

*Important*:

_MySQL does not automatically revoke any privileges when you drop a
database or table_. However, if you drop a routine, any routine-level
privileges granted for that routine are revoked.

* Account Names and Passwords *

The USER value indicates the MySQL account to which the *Note `GRANT':
grant.  statement applies. To accommodate granting rights to users from
arbitrary hosts, MySQL supports specifying the USER value in the form
`USER_NAME@HOST_NAME'.  If a USER_NAME or HOST_NAME value is legal as an
unquoted identifier, you need not quote it. However, quotation marks
are necessary to specify a USER_NAME string containing special
characters (such as ``-''), or a HOST_NAME string containing special
characters or wildcard characters (such as ``%''); for example,
`'test-user'@'%.com''. Quote the user name and host name separately.

You can specify wildcards in the host name. For example,
`USER_NAME@'%.example.com'' applies to USER_NAME for any host in the
`example.com' domain, and `USER_NAME@'192.168.1.%'' applies to
USER_NAME for any host in the `192.168.1' class C subnet.

The simple form USER_NAME is a synonym for `USER_NAME@'%''.

_MySQL does not support wildcards in user names_. To refer to an
anonymous user, specify an account with an empty user name with the
*Note `GRANT': grant. statement:

     GRANT ALL ON test.* TO ''@'localhost' ...

In this case, any user who connects from the local host with the
correct password for the anonymous user will be permitted access, with
the privileges associated with the anonymous-user account.

For additional information about user name and host name values in
account names, see *Note account-names::.

To specify quoted values, quote database, table, column, and routine
names as identifiers. Quote user names and host names as identifiers or
as strings. Quote passwords as strings. For string-quoting and
identifier-quoting guidelines, see *Note string-literals::, and *Note
identifiers::.

The ``_'' and ``%'' wildcards are permitted when specifying database
names in *Note `GRANT': grant. statements that grant privileges at the
global or database levels. This means, for example, that if you want to
use a ``_'' character as part of a database name, you should specify it
as ``\_'' in the *Note `GRANT': grant. statement, to prevent the user
from being able to access additional databases matching the wildcard
pattern; for example, `GRANT ... ON `foo\_bar`.* TO ...'.

*Warning*:

If you permit anonymous users to connect to the MySQL server, you
should also grant privileges to all local users as
`USER_NAME@localhost'.  Otherwise, the anonymous user account for
`localhost' in the `mysql.user' table (created during MySQL
installation) is used when named users try to log in to the MySQL
server from the local machine. For details, see *Note
connection-access::.

To determine whether the preceding warning applies to you, execute the
following query, which lists any anonymous users:

     SELECT Host, User FROM mysql.user WHERE User='';

To avoid the problem just described, delete the local anonymous user
account using this statement:

     DROP USER ''@'localhost';

*Note `GRANT': grant. supports host names up to 60 characters long.
Database, table, column, and routine names can be up to 64 characters.
User names can be up to 16 characters.

*Warning*:

_The permissible length for user names cannot be changed by altering
the `mysql.user' table.  Attempting to do so results in unpredictable
behavior which may even make it impossible for users to log in to the
MySQL server_. You should never alter any of the tables in the `mysql'
database in any manner whatsoever except by means of the procedure
described in *Note mysql-upgrade::.

The user specification may indicate how the user should authenticate
when connecting to the server, through inclusion of an `IDENTIFIED BY'
or `IDENTIFIED WITH' clause. The syntax is the same as for the *Note
`CREATE USER': create-user. statement. See *Note create-user::.

When the `IDENTIFIED BY' clause is present and you have global grant
privileges, the password becomes the new password for the account, even
if the account exists and already has a password. With no `IDENTIFIED
BY' clause, the account password remains unchanged.

If the account named in a *Note `GRANT': grant.  statement does not
exist in the `mysql.user' table, *Note `GRANT': grant. creates it if the
`NO_AUTO_CREATE_USER' SQL mode is not enabled. _This is very insecure_
unless you specify a nonempty password using `IDENTIFIED BY' or an
authentication plugin using `IDENTIFIED WITH'.

If the account does not exist and `NO_AUTO_CREATE_USER' is enabled,
*Note `GRANT': grant. fails and does not create the account unless you
specify a nonempty password with `IDENTIFIED BY' or specify an
`IDENTIFIED WITH' clause to name an authentication plugin.

*Important*:

*Note `GRANT': grant. may be recorded in server logs or in a history
file such as `~/.mysql_history', which means that cleartext passwords
may be read by anyone having read access to that information. See *Note
password-security::.

* Other Account Characteristics *

The `WITH' clause is used for several purposes:

   * To enable a user to grant privileges to other users

   * To specify resource limits for a user

   * To specify whether and how a user must use secure connections to
     the server

The `WITH GRANT OPTION' clause gives the user the ability to give to
other users any privileges the user has at the specified privilege
level. You should be careful to whom you give the `GRANT OPTION'
privilege because two users with different privileges may be able to
combine privileges!

You cannot grant another user a privilege which you yourself do not
have; the `GRANT OPTION' privilege enables you to assign only those
privileges which you yourself possess.

Be aware that when you grant a user the `GRANT OPTION' privilege at a
particular privilege level, any privileges the user possesses (or may
be given in the future) at that level can also be granted by that user
to other users. Suppose that you grant a user the `INSERT' privilege on
a database. If you then grant the `SELECT' privilege on the database
and specify `WITH GRANT OPTION', that user can give to other users not
only the `SELECT' privilege, but also `INSERT'. If you then grant the
`UPDATE' privilege to the user on the database, the user can grant
`INSERT', `SELECT', and `UPDATE'.

For a nonadministrative user, you should not grant the `ALTER'
privilege globally or for the `mysql' database. If you do that, the user
can try to subvert the privilege system by renaming tables!

For additional information about security risks associated with
particular privileges, see *Note privileges-provided::.

Several `WITH' clause options specify limits on use of server resources
by an account:

   * The `MAX_QUERIES_PER_HOUR COUNT', `MAX_UPDATES_PER_HOUR COUNT', and
     `MAX_CONNECTIONS_PER_HOUR COUNT' limits restrict the number of
     queries, updates, and connections to the server permitted to this
     account during any given one-hour period. (Queries for which
     results are served from the query cache do not count against the
     `MAX_QUERIES_PER_HOUR' limit.) If COUNT is `0' (the default), this
     means that there is no limitation for the account.

   * The `MAX_USER_CONNECTIONS COUNT' limit restricts the maximum
     number of simultaneous connections to the server by the account. A
     nonzero COUNT specifies the limit for the account explicitly. If
     COUNT is `0' (the default), the server determines the number of
     simultaneous connections for the account from the global value of
     the `max_user_connections' system variable. If
     `max_user_connections' is also zero, there is no limit for the
     account.

To specify resource limits for an existing user without affecting
existing privileges, use *Note `GRANT USAGE': grant. at the global
level (`ON *.*') and name the limits to be changed. For example:

     GRANT USAGE ON *.* TO ...
       WITH MAX_QUERIES_PER_HOUR 500 MAX_UPDATES_PER_HOUR 100;

Limits not specified retain their current values.

For more information on restricting access to server resources, see
*Note user-resources::.

MySQL can check X509 certificate attributes in addition to the usual
authentication that is based on the user name and password. To specify
SSL-related options for a MySQL account, use the `REQUIRE' clause of the
*Note `GRANT': grant. statement. (For background information on the use
of SSL with MySQL, see *Note ssl-connections::.)

There are a number of different possibilities for limiting connection
types for a given account:

   * `REQUIRE NONE' indicates that the account has no SSL or X509
     requirements. This is the default if no SSL-related `REQUIRE'
     options are specified. Unencrypted connections are permitted if
     the user name and password are valid. However, encrypted
     connections can also be used, at the client's option, if the
     client has the proper certificate and key files. That is, the
     client need not specify any SSL command options, in which case the
     connection will be unencrypted. To use an encrypted connection,
     the client must specify either the `--ssl-ca' option, or all three
     of the `--ssl-ca', `--ssl-key', and `--ssl-cert' options.

   * The `REQUIRE SSL' option tells the server to permit only
     SSL-encrypted connections for the account.

          GRANT ALL PRIVILEGES ON test.* TO 'root'@'localhost'
            IDENTIFIED BY 'goodsecret' REQUIRE SSL;

     To connect, the client must specify the `--ssl-ca' option to
     authenticate the server certificate, and may additionally specify
     the `--ssl-key' and `--ssl-cert' options. If neither `--ssl-ca'
     option nor `--ssl-capath' option is specified, the client does not
     authenticate the server certificate.

   * `REQUIRE X509' means that the client must have a valid certificate
     but that the exact certificate, issuer, and subject do not matter.
     The only requirement is that it should be possible to verify its
     signature with one of the CA certificates.

          GRANT ALL PRIVILEGES ON test.* TO 'root'@'localhost'
            IDENTIFIED BY 'goodsecret' REQUIRE X509;

     To connect, the client must specify the `--ssl-ca', `--ssl-key',
     and `--ssl-cert' options. This is also true for `ISSUER' and
     `SUBJECT' because those `REQUIRE' options imply `X509'.

   * `REQUIRE ISSUER 'ISSUER'' places the restriction on connection
     attempts that the client must present a valid X509 certificate
     issued by CA `'ISSUER''. If the client presents a certificate that
     is valid but has a different issuer, the server rejects the
     connection. Use of X509 certificates always implies encryption, so
     the `SSL' option is unnecessary in this case.

          GRANT ALL PRIVILEGES ON test.* TO 'root'@'localhost'
            IDENTIFIED BY 'goodsecret'
            REQUIRE ISSUER '/C=FI/ST=Some-State/L=Helsinki/
              O=MySQL Finland AB/CN=Tonu Samuel/emailAddress=tonu@example.com';

     The `'ISSUER'' value should be entered as a single string.

     *Note*:

     If MySQL is linked against a version of OpenSSL older than 0.9.6h,
     use `Email' rather than `emailAddress' in the `'ISSUER'' value.

   * `REQUIRE SUBJECT 'SUBJECT'' places the restriction on connection
     attempts that the client must present a valid X509 certificate
     containing the subject SUBJECT. If the client presents a
     certificate that is valid but has a different subject, the server
     rejects the connection.

          GRANT ALL PRIVILEGES ON test.* TO 'root'@'localhost'
            IDENTIFIED BY 'goodsecret'
            REQUIRE SUBJECT '/C=EE/ST=Some-State/L=Tallinn/
              O=MySQL demo client certificate/
              CN=Tonu Samuel/emailAddress=tonu@example.com';

     The `'SUBJECT'' value should be entered as a single string. MySQL
     does a simple string comparison of this value to the value in the
     certificate, so lettercase and component ordering must be given
     exactly as present in the certificate.

     *Note*:

     Regarding `emailAddress', see the note in the description of
     `REQUIRE ISSUER'.

   * `REQUIRE CIPHER 'CIPHER'' is needed to ensure that ciphers and key
     lengths of sufficient strength are used. SSL itself can be weak if
     old algorithms using short encryption keys are used. Using this
     option, you can ask that a specific cipher method is used for a
     connection.

          GRANT ALL PRIVILEGES ON test.* TO 'root'@'localhost'
            IDENTIFIED BY 'goodsecret'
            REQUIRE CIPHER 'EDH-RSA-DES-CBC3-SHA';

The `SUBJECT', `ISSUER', and `CIPHER' options can be combined in the
`REQUIRE' clause like this:

     GRANT ALL PRIVILEGES ON test.* TO 'root'@'localhost'
       IDENTIFIED BY 'goodsecret'
       REQUIRE SUBJECT '/C=EE/ST=Some-State/L=Tallinn/
         O=MySQL demo client certificate/
         CN=Tonu Samuel/emailAddress=tonu@example.com'
       AND ISSUER '/C=FI/ST=Some-State/L=Helsinki/
         O=MySQL Finland AB/CN=Tonu Samuel/emailAddress=tonu@example.com'
       AND CIPHER 'EDH-RSA-DES-CBC3-SHA';

The order of the options does not matter, but no option can be
specified twice. The `AND' keyword is optional between `REQUIRE'
options.

If you are using table, column, or routine privileges for even one
user, the server examines table, column, and routine privileges for all
users and this slows down MySQL a bit.  Similarly, if you limit the
number of queries, updates, or connections for any users, the server
must monitor these values.

* MySQL and Standard SQL Versions of *Note `GRANT': grant.  *

The biggest differences between the MySQL and standard SQL versions of
*Note `GRANT': grant. are:

   * MySQL associates privileges with the combination of a host name
     and user name and not with only a user name.

   * Standard SQL does not have global or database-level privileges,
     nor does it support all the privilege types that MySQL supports.

   * MySQL does not support the standard SQL `UNDER' privilege.

   * Standard SQL privileges are structured in a hierarchical manner.
     If you remove a user, all privileges the user has been granted are
     revoked. This is also true in MySQL if you use *Note `DROP USER':
     drop-user. See *Note drop-user::.

   * In standard SQL, when you drop a table, all privileges for the
     table are revoked. In standard SQL, when you revoke a privilege,
     all privileges that were granted based on that privilege are also
     revoked. In MySQL, privileges can be dropped only with explicit
     *Note `DROP USER': drop-user. or *Note `REVOKE': revoke.
     statements or by manipulating the MySQL grant tables directly.

   * In MySQL, it is possible to have the `INSERT' privilege for only
     some of the columns in a table. In this case, you can still
     execute *Note `INSERT': insert. statements on the table, provided
     that you insert values only for those columns for which you have
     the `INSERT' privilege. The omitted columns are set to their
     implicit default values if strict SQL mode is not enabled. In
     strict mode, the statement is rejected if any of the omitted
     columns have no default value. (Standard SQL requires you to have
     the `INSERT' privilege on all columns.) *Note server-sql-mode::,
     discusses strict mode. *Note data-type-defaults::, discusses
     implicit default values.


File: manual.info,  Node: rename-user,  Next: revoke,  Prev: grant,  Up: account-management-sql

13.7.1.4 `RENAME USER' Syntax
.............................

     RENAME USER OLD_USER TO NEW_USER
         [, OLD_USER TO NEW_USER] ...

The *Note `RENAME USER': rename-user. statement renames existing MySQL
accounts. To use it, you must have the global `CREATE USER' privilege
or the `UPDATE' privilege for the `mysql' database. An error occurs if
any old account does not exist or any new account exists. Each account
name uses the format described in *Note account-names::. For example:

     RENAME USER 'jeffrey'@'localhost' TO 'jeff'@'127.0.0.1';

If you specify only the user name part of the account name, a host name
part of `'%'' is used.

*Note `RENAME USER': rename-user. causes the privileges held by the old
user to be those held by the new user. However, *Note `RENAME USER':
rename-user. does not automatically drop or invalidate databases or
objects within them that the old user created. This includes stored
programs or views for which the `DEFINER' attribute names the old user.
Attempts to access such objects may produce an error if they execute in
definer security context. (For information about security context, see
*Note stored-programs-security::.)

The privilege changes take effect as indicated in *Note
privilege-changes::.


File: manual.info,  Node: revoke,  Next: set-password,  Prev: rename-user,  Up: account-management-sql

13.7.1.5 `REVOKE' Syntax
........................

     REVOKE
         PRIV_TYPE [(COLUMN_LIST)]
           [, PRIV_TYPE [(COLUMN_LIST)]] ...
         ON [OBJECT_TYPE] PRIV_LEVEL
         FROM USER [, USER] ...

     REVOKE ALL PRIVILEGES, GRANT OPTION
         FROM USER [, USER] ...

     REVOKE PROXY ON USER
         FROM USER [, USER] ...

The *Note `REVOKE': revoke. statement enables system administrators to
revoke privileges from MySQL accounts.  Each account name uses the
format described in *Note account-names::. For example:

     REVOKE INSERT ON *.* FROM 'jeffrey'@'localhost';

If you specify only the user name part of the account name, a host name
part of `'%'' is used.

For details on the levels at which privileges exist, the permissible
PRIV_TYPE and PRIV_LEVEL values, and the syntax for specifying users
and passwords, see *Note grant::

To use the first *Note `REVOKE': revoke. syntax, you must have the
`GRANT OPTION' privilege, and you must have the privileges that you are
revoking.

To revoke all privileges, use the second syntax, which drops all
global, database, table, column, and routine privileges for the named
user or users:

     REVOKE ALL PRIVILEGES, GRANT OPTION FROM USER [, USER] ...

To use this *Note `REVOKE': revoke. syntax, you must have the global
`CREATE USER' privilege or the `UPDATE' privilege for the `mysql'
database.

*Note `REVOKE': revoke. removes privileges, but does not drop
`mysql.user' table entries. To remove a user account entirely, use
*Note `DROP USER': drop-user. (see *Note drop-user::) or *Note
`DELETE': delete.

If the grant tables hold privilege rows that contain mixed-case
database or table names and the `lower_case_table_names' system
variable is set to a nonzero value, *Note `REVOKE': revoke. cannot be
used to revoke these privileges. It will be necessary to manipulate the
grant tables directly. (*Note `GRANT': grant. will not create such rows
when `lower_case_table_names' is set, but such rows might have been
created prior to setting the variable.)

When successfully executed from the *Note `mysql': mysql.  program,
*Note `REVOKE': revoke. responds with `Query OK, 0 rows affected'. To
determine what privileges result from the operation, use *Note `SHOW
GRANTS': show-grants. See *Note show-grants::.


File: manual.info,  Node: set-password,  Prev: revoke,  Up: account-management-sql

13.7.1.6 `SET PASSWORD' Syntax
..............................

     SET PASSWORD [FOR USER] =
         {
             PASSWORD('CLEARTEXT PASSWORD')
           | OLD_PASSWORD('CLEARTEXT PASSWORD')
           | 'ENCRYPTED PASSWORD'
         }

The *Note `SET PASSWORD': set-password. statement assigns a password to
an existing MySQL user account. When the `read_only' system variable is
enabled, the `SUPER' privilege is required to use *Note `SET PASSWORD':
set-password, in addition to whatever other privileges might be
required.

If the password is specified using the `PASSWORD()' or `OLD_PASSWORD()'
function, the cleartext (unencrypted) password should be given as the
argument to the function, which hashes the password and returns the
encrypted password string. If the password is specified without using
either function, it should be the already encrypted password value as a
literal string. In all cases, the encrypted password string must be in
the format required by the authentication method used for the account.

With no `FOR USER' clause, this statement sets the password for the
current user.  (To see which account the server authenticated you as,
invoke the `CURRENT_USER()' function.) Any client who successfully
connects to the server using a nonanonymous account can change the
password for that account.

With a `FOR USER' clause, this statement sets the password for the
named user. You must have the *Note `UPDATE': update. privilege for the
`mysql' database to do this. The user account name uses the format
described in *Note account-names::. The USER value should be given as
`'USER_NAME'@'HOST_NAME'', where `'USER_NAME'' and `'HOST_NAME'' are
exactly as listed in the `User' and `Host' columns of the `mysql.user'
table row. (If you specify only a user name, a host name of `'%'' is
used.) For example, to set the password for an account with `User' and
`Host' column values of `'bob'' and `'%.example.org'', write the
statement like this:

     SET PASSWORD FOR 'bob'@'%.example.org' = PASSWORD('CLEARTEXT PASSWORD');

That is equivalent to the following statements:

     UPDATE mysql.user SET Password=PASSWORD('CLEARTEXT PASSWORD')
       WHERE User='bob' AND Host='%.example.org';
     FLUSH PRIVILEGES;

Another way to set the password is to use *Note `GRANT': grant.:

     GRANT USAGE ON *.* TO 'bob'@'%.example.org' IDENTIFIED BY 'CLEARTEXT PASSWORD';

The `old_passwords' system variable value determines the hashing method
used by `PASSWORD()'. If you specify the password using that function
and *Note `SET PASSWORD': set-password. rejects the password as not
being in the correct format, it may be necessary to set `old_passwords'
to change the hashing method. For descriptions of the permitted values,
see *Note server-system-variables::.

For more information about setting passwords, see *Note
assigning-passwords::

*Important*:

*Note `SET PASSWORD': set-password. may be recorded in server logs or
in a history file such as `~/.mysql_history', which means that
cleartext passwords may be read by anyone having read access to that
information. See *Note password-security::.

*Caution*:

If you are connecting to a MySQL 4.1 or later server using a pre-4.1
client program, do not change your password without first reading *Note
password-hashing::. The default password hashing format changed in
MySQL 4.1, and if you change your password, it might be stored using a
hashing format that pre-4.1 clients cannot generate, thus preventing
you from connecting to the server afterward.

If you are using MySQL Replication, be aware that, currently, a
password used by a replication slave as part of a *Note `CHANGE MASTER
TO': change-master-to. statement is effectively limited to 32
characters in length; the password can be longer, but any excess
characters are truncated. This is not due to any limit imposed by the
MySQL Server generally, but rather is an issue specific to MySQL
Replication. (For more information, see Bug #43439.)


File: manual.info,  Node: table-maintenance-sql,  Next: plugin-sql,  Prev: account-management-sql,  Up: sql-syntax-server-administration

13.7.2 Table Maintenance Statements
-----------------------------------

* Menu:

* analyze-table::                `ANALYZE TABLE' Syntax
* check-table::                  `CHECK TABLE' Syntax
* checksum-table::               `CHECKSUM TABLE' Syntax
* optimize-table::               `OPTIMIZE TABLE' Syntax
* repair-table::                 `REPAIR TABLE' Syntax


File: manual.info,  Node: analyze-table,  Next: check-table,  Prev: table-maintenance-sql,  Up: table-maintenance-sql

13.7.2.1 `ANALYZE TABLE' Syntax
...............................

     ANALYZE [NO_WRITE_TO_BINLOG | LOCAL] TABLE
         TBL_NAME [, TBL_NAME] ...

`ANALYZE TABLE' analyzes and stores the key distribution for a table.
During the analysis, the table is locked with a read lock for `InnoDB'
and `MyISAM'. This statement works with `InnoDB', `NDB', and `MyISAM'
tables. For `MyISAM' tables, this statement is equivalent to using
*Note `myisamchk --analyze': myisamchk.

For more information on how the analysis works within `InnoDB', see
*Note innodb-restrictions::.

MySQL uses the stored key distribution to decide the order in which
tables should be joined when you perform a join on something other than
a constant. In addition, key distributions can be used when deciding
which indexes to use for a specific table within a query.

This statement requires `SELECT' and `INSERT' privileges for the table.

`ANALYZE TABLE' is supported for partitioned tables, and you can use
`ALTER TABLE ... ANALYZE PARTITION' to analyze one or more partitions;
for more information, see *Note alter-table::, and *Note
partitioning-maintenance::.

`ANALYZE TABLE' returns a result set with the following columns.

This table describes the columns of the *Note `ANALYZE TABLE':
analyze-table. result set.

Column      Value
`Table'     The table name
`Op'        Always `analyze'
`Msg_type'  `status', `error', `info', `note', or
            `warning'
`Msg_text'  An informational message

You can check the stored key distribution with the *Note `SHOW INDEX':
show-index. statement. See *Note show-index::.

If the table has not changed since the last `ANALYZE TABLE' statement,
the table is not analyzed again.

By default, the server writes *Note `ANALYZE TABLE': analyze-table.
statements to the binary log so that they replicate to replication
slaves. To suppress logging, specify the optional `NO_WRITE_TO_BINLOG'
keyword or its alias `LOCAL'.


File: manual.info,  Node: check-table,  Next: checksum-table,  Prev: analyze-table,  Up: table-maintenance-sql

13.7.2.2 `CHECK TABLE' Syntax
.............................

     CHECK TABLE TBL_NAME [, TBL_NAME] ... [OPTION] ...

     OPTION = {FOR UPGRADE | QUICK | FAST | MEDIUM | EXTENDED | CHANGED}

`CHECK TABLE' checks a table or tables for errors. *Note `CHECK TABLE':
check-table. works for *Note `InnoDB': innodb-storage-engine, *Note
`MyISAM': myisam-storage-engine, *Note `ARCHIVE':
archive-storage-engine, and *Note `CSV': csv-storage-engine. tables. For
`MyISAM' tables, the key statistics are updated as well.

To check a table, you must have some privilege for it.

*Note `CHECK TABLE': check-table. can also check views for problems,
such as tables that are referenced in the view definition that no
longer exist.

`CHECK TABLE' is supported for partitioned tables, and you can use
`ALTER TABLE ... CHECK PARTITION' to check one or more partitions; for
more information, see *Note alter-table::, and *Note
partitioning-maintenance::.

* Output *

`CHECK TABLE' returns a result set with the following columns.

This table describes the columns of the *Note `CHECK TABLE':
check-table. result set.

Column      Value
`Table'     The table name
`Op'        Always `check'
`Msg_type'  `status', `error', `info', `note', or
            `warning'
`Msg_text'  An informational message

Note that the statement might produce many rows of information for each
checked table. The last row has a `Msg_type' value of `status' and the
`Msg_text' normally should be `OK'. If you don't get `OK', or `Table is
already up to date' you should normally run a repair of the table. See
*Note myisam-table-maintenance::. `Table is already up to date' means
that the storage engine for the table indicated that there was no need
to check the table.

* Checking Version Compatibility *

The `FOR UPGRADE' option checks whether the named tables are compatible
with the current version of MySQL.  With `FOR UPGRADE', the server
checks each table to determine whether there have been any incompatible
changes in any of the table's data types or indexes since the table was
created. If not, the check succeeds. Otherwise, if there is a possible
incompatibility, the server runs a full check on the table (which might
take some time). If the full check succeeds, the server marks the
table's `.frm' file with the current MySQL version number. Marking the
`.frm' file ensures that further checks for the table with the same
version of the server will be fast.

Incompatibilities might occur because the storage format for a data
type has changed or because its sort order has changed. Our aim is to
avoid these changes, but occasionally they are necessary to correct
problems that would be worse than an incompatibility between releases.

Currently, `FOR UPGRADE' discovers these incompatibilities:

   * The indexing order for end-space in *Note `TEXT': blob. columns for
     `InnoDB' and `MyISAM' tables changed between MySQL 4.1 and 5.0.

   * The storage method of the new *Note `DECIMAL': fixed-point-types.
     data type changed between MySQL 5.0.3 and 5.0.5.

   * If your table was created by a different version of the MySQL
     server than the one you are currently running, `FOR UPGRADE'
     indicates that the table has an `.frm' file with an incompatible
     version. In this case, the result set returned by *Note `CHECK
     TABLE': check-table. contains a line with a `Msg_type' value of
     `error' and a `Msg_text' value of `Table upgrade required. Please
     do "REPAIR TABLE `TBL_NAME`" to fix it!'

   * Changes are sometimes made to character sets or collations that
     require table indexes to be rebuilt. For details about these
     changes and when `FOR UPGRADE' detects them, see *Note
     checking-table-incompatibilities::.

* Checking Data Consistency *

The other check options that can be given are shown in the following
table. These options are passed to the storage engine, which may use
them or not.

This table describes other *Note `CHECK TABLE': check-table. options.

Type        Meaning
`QUICK'     Do not scan the rows to check for incorrect links. Applies to
            `InnoDB' and `MyISAM' tables and views.
`FAST'      Check only tables that have not been closed properly.
            Applies only to `MyISAM' tables and views; ignored for
            `InnoDB'.
`CHANGED'   Check only tables that have been changed since the last
            check or that have not been closed properly. Applies only to
            `MyISAM' tables and views; ignored for `InnoDB'.
`MEDIUM'    Scan rows to verify that deleted links are valid. This also
            calculates a key checksum for the rows and verifies this
            with a calculated checksum for the keys. Applies only to
            `MyISAM' tables and views; ignored for `InnoDB'.
`EXTENDED'  Do a full key lookup for all keys for each row. This ensures
            that the table is 100% consistent, but takes a long time.
            Applies only to `MyISAM' tables and views; ignored for
            `InnoDB'.

If none of the options `QUICK', `MEDIUM', or `EXTENDED' are specified,
the default check type for dynamic-format `MyISAM' tables is `MEDIUM'.
This has the same result as running *Note `myisamchk --medium-check
TBL_NAME': myisamchk. on the table. The default check type also is
`MEDIUM' for static-format `MyISAM' tables, unless `CHANGED' or `FAST'
is specified. In that case, the default is `QUICK'. The row scan is
skipped for `CHANGED' and `FAST' because the rows are very seldom
corrupted.

You can combine check options, as in the following example that does a
quick check on the table to determine whether it was closed properly:

     CHECK TABLE test_table FAST QUICK;

*Note*:

In some cases, *Note `CHECK TABLE': check-table.  changes the table.
This happens if the table is marked as `corrupted' or `not closed
properly' but *Note `CHECK TABLE': check-table. does not find any
problems in the table. In this case, *Note `CHECK TABLE': check-table.
marks the table as okay.

If a table is corrupted, it is most likely that the problem is in the
indexes and not in the data part. All of the preceding check types
check the indexes thoroughly and should thus find most errors.

If you just want to check a table that you assume is okay, you should
use no check options or the `QUICK' option. The latter should be used
when you are in a hurry and can take the very small risk that `QUICK'
does not find an error in the data file. (In most cases, under normal
usage, MySQL should find any error in the data file. If this happens,
the table is marked as `corrupted' and cannot be used until it is
repaired.)

`FAST' and `CHANGED' are mostly intended to be used from a script (for
example, to be executed from `cron') if you want to check tables from
time to time. In most cases, `FAST' is to be preferred over `CHANGED'.
(The only case when it is not preferred is when you suspect that you
have found a bug in the `MyISAM' code.)

`EXTENDED' is to be used only after you have run a normal check but
still get strange errors from a table when MySQL tries to update a row
or find a row by key. This is very unlikely if a normal check has
succeeded.

Use of *Note `CHECK TABLE ... EXTENDED': check-table. might influence
the execution plan generated by the query optimizer.

Some problems reported by *Note `CHECK TABLE': check-table. cannot be
corrected automatically:

   * `Found row where the auto_increment column has the value 0'.

     This means that you have a row in the table where the
     `AUTO_INCREMENT' index column contains the value 0. (It is
     possible to create a row where the `AUTO_INCREMENT' column is 0 by
     explicitly setting the column to 0 with an *Note `UPDATE': update.
     statement.)

     This is not an error in itself, but could cause trouble if you
     decide to dump the table and restore it or do an *Note `ALTER
     TABLE': alter-table. on the table. In this case, the
     `AUTO_INCREMENT' column changes value according to the rules of
     `AUTO_INCREMENT' columns, which could cause problems such as a
     duplicate-key error.

     To get rid of the warning, simply execute an *Note `UPDATE':
     update. statement to set the column to some value other than 0.

* InnoDB Tables *

The following notes apply to *Note `InnoDB': innodb-storage-engine.
tables:

   * If *Note `CHECK TABLE': check-table. finds a problem for an
     `InnoDB' table, the server may shut down to prevent error
     propagation. Details of the error will be written to the error log.

   * If *Note `CHECK TABLE': check-table. encounters corruptions or
     errors in `InnoDB' tables or indexes, it reports an error. It does
     not shut down the server. Starting with MySQL 5.5, *Note `CHECK
     TABLE': check-table. usually marks the index and sometimes marks
     the table as corrupted, preventing further use of the index or
     table.

   * If *Note `CHECK TABLE': check-table. finds the wrong number of
     entries in a secondary index, it will report an error but will not
     shut down the server or prevent access to the file.

   * *Note `CHECK TABLE': check-table. surveys the index page
     structure, then surveys each key entry. It does not validate the
     key pointer to a clustered record or follow the path for *Note
     `BLOB': blob. pointers.

   * When an `InnoDB' table is stored in its own .ibd file in
     file-per-table mode, the first 3 pages of the `.ibd' contain
     header information rather than table or index data. The `CHECK
     TABLE' statement does not detect inconsistencies that only affect
     the header data. To verify the entire contents of an `InnoDB'
     `.ibd' file, use the *Note `innochecksum': innochecksum. command.

   * When running `CHECK TABLE' on large `InnoDB' tables, other threads
     may be blocked during `CHECK TABLE' execution. To avoid timeouts,
     the semaphore wait threshold (600 seconds) is extended by 2 hours
     (7200 seconds) for `CHECK TABLE' operations. If `InnoDB' detects
     semaphore waits of 240 seconds or more it starts printing `InnoDB'
     monitor output to the error log. If a lock request extends beyond
     the semaphore wait threshold, `InnoDB' will abort the process. To
     avoid the possibility of a semaphore wait timeout entirely, you
     can run `CHECK TABLE QUICK' instead of `CHECK TABLE'.


File: manual.info,  Node: checksum-table,  Next: optimize-table,  Prev: check-table,  Up: table-maintenance-sql

13.7.2.3 `CHECKSUM TABLE' Syntax
................................

     CHECKSUM TABLE TBL_NAME [, TBL_NAME] ... [ QUICK | EXTENDED ]

*Note `CHECKSUM TABLE': checksum-table. reports a table checksum. This
statement requires the `SELECT' privilege for the table.

With `QUICK', the live table checksum is reported if it is available,
or `NULL' otherwise. This is very fast. A live checksum is enabled by
specifying the `CHECKSUM=1' table option when you create the table;
currently, this is supported only for `MyISAM' tables. See *Note
create-table::.

With `EXTENDED', the entire table is read row by row and the checksum
is calculated. This can be very slow for large tables.

If neither `QUICK' nor `EXTENDED' is specified, MySQL returns a live
checksum if the table storage engine supports it and scans the table
otherwise.

For a nonexistent table, *Note `CHECKSUM TABLE': checksum-table.
returns `NULL' and generates a warning.

In MySQL 5.5, *Note `CHECKSUM TABLE': checksum-table. returns 0 for
partitioned tables unless you include the `EXTENDED' option. This issue
is resolved in MySQL 5.6. (Bug #11933226, Bug #60681)

The checksum value depends on the table row format. If the row format
changes, the checksum also changes. For example, the storage format for
*Note `VARCHAR': char.  changed between MySQL 4.1 and 5.0, so if a 4.1
table is upgraded to MySQL 5.0, the checksum value may change.

*Important*:

If the checksums for two tables are different, then it is almost
certain that the tables are different in some way.  However, because
the hashing function used by *Note `CHECKSUM TABLE': checksum-table. is
not guaranteed to be collision-free, there is a slight chance that two
tables which are not identical can produce the same checksum.


File: manual.info,  Node: optimize-table,  Next: repair-table,  Prev: checksum-table,  Up: table-maintenance-sql

13.7.2.4 `OPTIMIZE TABLE' Syntax
................................

     OPTIMIZE [NO_WRITE_TO_BINLOG | LOCAL] TABLE
         TBL_NAME [, TBL_NAME] ...

Reorganizes the physical storage of table data and associated index
data, to reduce storage space and improve I/O efficiency when accessing
the table. The exact changes made to each table depend on the storage
engine used by that table.

Use *Note `OPTIMIZE TABLE': optimize-table. in these cases, depending
on the type of table:

   * After doing substantial insert, update, or delete operations on an
     `InnoDB' table that has its own .ibd file because it was created
     with the `innodb_file_per_table' option enabled. The table and
     indexes are reorganized, and disk space can be reclaimed for use
     by the operating system.

   * After deleting a large part of a `MyISAM' or `ARCHIVE' table, or
     making many changes to a `MyISAM' or `ARCHIVE 'table with
     variable-length rows (tables that have *Note `VARCHAR': char,
     *Note `VARBINARY': binary-varbinary, *Note `BLOB': blob, or *Note
     `TEXT': blob. columns). Deleted rows are maintained in a linked
     list and subsequent *Note `INSERT': insert. operations reuse old
     row positions. You can use *Note `OPTIMIZE TABLE': optimize-table.
     to reclaim the unused space and to defragment the data file. After
     extensive changes to a table, this statement may also improve
     performance of statements that use the table, sometimes
     significantly.

This statement requires `SELECT' and `INSERT' privileges for the table.

*Note `OPTIMIZE TABLE': optimize-table. is also supported for
partitioned tables. For information about using this statement with
partitioned tables and table partitions, see *Note
partitioning-maintenance::.

*Note `OPTIMIZE TABLE': optimize-table. works for *Note `InnoDB':
innodb-storage-engine, *Note `MyISAM': myisam-storage-engine, and *Note
`ARCHIVE': archive-storage-engine. tables.  *Note `OPTIMIZE TABLE':
optimize-table. is also supported for dynamic columns of in-memory
*Note `NDB': mysql-cluster. tables. It does not work for Disk Data
tables. The performance of `OPTIMIZE' on Cluster tables can be tuned by
adjusting the value of the `ndb_optimization_delay' system variable,
which controls the number of milliseconds to wait between processing
batches of rows by *Note `OPTIMIZE TABLE': optimize-table. For more
information, see *Note mysql-cluster-limitations-resolved::.

For MySQL Cluster tables, *Note `OPTIMIZE TABLE': optimize-table. can
be interrupted by (for example) killing the SQL thread performing the
`OPTIMIZE' operation.

By default, *Note `OPTIMIZE TABLE': optimize-table. does _not_ work for
tables created using any other storage engine and returns a result
indicating this lack of support. You can make *Note `OPTIMIZE TABLE':
optimize-table. work for other storage engines by starting *Note
`mysqld': mysqld. with the `--skip-new' option. In this case, *Note
`OPTIMIZE TABLE': optimize-table. is just mapped to *Note `ALTER
TABLE': alter-table.

* InnoDB Details *

For `InnoDB' tables, *Note `OPTIMIZE TABLE': optimize-table. is mapped
to *Note `ALTER TABLE': alter-table, which rebuilds the table to update
index statistics and free unused space in the clustered index. This is
displayed in the output of *Note `OPTIMIZE TABLE': optimize-table. when
you run it on an `InnoDB' table, as shown here:

     mysql> OPTIMIZE TABLE foo;
     +----------+----------+----------+-------------------------------------------------------------------+
     | Table    | Op       | Msg_type | Msg_text                                                          |
     +----------+----------+----------+-------------------------------------------------------------------+
     | test.foo | optimize | note     | Table does not support optimize, doing recreate + analyze instead |
     | test.foo | optimize | status   | OK                                                                |
     +----------+----------+----------+-------------------------------------------------------------------+

This operation does not use fast index creation. Secondary indexes are
not created as efficiently because keys are inserted in the order they
appeared in the primary key. See *Note
innodb-create-index-limitations::.

`InnoDB' stores data using a page-allocation method and does not suffer
from fragmentation in the same way that legacy storage engines (such as
`MyISAM') will. When considering whether or not to run optimize,
consider the workload of transactions that your server will process:

   * Some level of fragmentation is expected.  `InnoDB' only fills
     pages 93% full, to leave room for updates without having to split
     pages.

   * Delete operations might leave gaps that leave pages less filled
     than desired, which could make it worthwhile to optimize the table.

   * Updates to rows usually rewrite the data within the same page,
     depending on the data type and row format, when sufficient space
     is available. See *Note innodb-compression-internals:: and *Note
     innodb-row-format-overview::.

   * High-concurrency workloads might leave gaps in indexes over time,
     as `InnoDB' retains multiple versions of the same data due through
     its MVCC mechanism. See *Note innodb-multi-versioning::.

* MyISAM Details *

For `MyISAM' tables, *Note `OPTIMIZE TABLE': optimize-table. works as
follows:

  1. If the table has deleted or split rows, repair the table.

  2. If the index pages are not sorted, sort them.

  3. If the table's statistics are not up to date (and the repair could
     not be accomplished by sorting the index), update them.

* Other Considerations *

*Note `OPTIMIZE TABLE': optimize-table. returns a result set with the
following columns.

This table describes columns of the *Note `OPTIMIZE TABLE':
optimize-table. result set.

Column      Value
`Table'     The table name
`Op'        Always `optimize'
`Msg_type'  `status', `error', `info', `note', or
            `warning'
`Msg_text'  An informational message

Note that MySQL locks the table during the time *Note `OPTIMIZE TABLE':
optimize-table. is running.

By default, the server writes *Note `OPTIMIZE TABLE': optimize-table.
statements to the binary log so that they replicate to replication
slaves. To suppress logging, specify the optional `NO_WRITE_TO_BINLOG'
keyword or its alias `LOCAL'.

*Note `OPTIMIZE TABLE': optimize-table. does not sort R-tree indexes,
such as spatial indexes on `POINT' columns. (Bug #23578)

As of MySQL 5.5.6, *Note `OPTIMIZE TABLE': optimize-table.  table
catches and throws any errors that occur while copying table statistics
from the old file to the newly created file.  For example. if the user
ID of the owner of the `.frm', `.MYD', or `.MYI' file is different from
the user ID of the *Note `mysqld': mysqld. process, *Note `OPTIMIZE
TABLE': optimize-table. generates a "cannot change ownership of the
file" error unless *Note `mysqld': mysqld. is started by the `root'
user.


File: manual.info,  Node: repair-table,  Prev: optimize-table,  Up: table-maintenance-sql

13.7.2.5 `REPAIR TABLE' Syntax
..............................

     REPAIR [NO_WRITE_TO_BINLOG | LOCAL] TABLE
         TBL_NAME [, TBL_NAME] ...
         [QUICK] [EXTENDED] [USE_FRM]

*Note `REPAIR TABLE': repair-table. repairs a possibly corrupted table.
By default, it has the same effect as *Note `myisamchk --recover
TBL_NAME': myisamchk.  *Note `REPAIR TABLE': repair-table. works for
`MyISAM', `ARCHIVE', and `CSV' tables. See *Note
myisam-storage-engine::, and *Note archive-storage-engine::, and *Note
csv-storage-engine::

This statement requires `SELECT' and `INSERT' privileges for the table.

*Note `REPAIR TABLE': repair-table. is supported for partitioned
tables. However, the `USE_FRM' option cannot be used with this
statement on a partitioned table.

You can use `ALTER TABLE ... REPAIR PARTITION' to repair one or more
partitions; for more information, see *Note alter-table::, and *Note
partitioning-maintenance::.

Normally, you should never have to run *Note `REPAIR TABLE':
repair-table. However, if disaster strikes, this statement is very
likely to get back all your data from a `MyISAM' table. If your tables
become corrupted often, you should try to find the reason for it, to
eliminate the need to use *Note `REPAIR TABLE': repair-table. See *Note
crashing::, and *Note myisam-table-problems::.

*Caution*:

It is best to make a backup of a table before performing a table repair
operation; under some circumstances the operation might cause data
loss. Possible causes include but are not limited to file system
errors. See *Note backup-and-recovery::.

*Warning*:

If the server crashes during a *Note `REPAIR TABLE': repair-table.
operation, it is essential after restarting it that you immediately
execute another *Note `REPAIR TABLE': repair-table. statement for the
table before performing any other operations on it. In the worst case,
you might have a new clean index file without information about the
data file, and then the next operation you perform could overwrite the
data file. This is an unlikely but possible scenario that underscores
the value of making a backup first.

*Note `REPAIR TABLE': repair-table. returns a result set with the
following columns.

This table describes columns of the *Note `REPAIR TABLE': repair-table.
result set.

Column      Value
`Table'     The table name
`Op'        Always `repair'
`Msg_type'  `status', `error', `info', `note', or
            `warning'
`Msg_text'  An informational message

The *Note `REPAIR TABLE': repair-table. statement might produce many
rows of information for each repaired table. The last row has a
`Msg_type' value of `status' and `Msg_test' normally should be `OK'. If
you do not get `OK' for a `MyISAM' table, you should try repairing it
with *Note `myisamchk --safe-recover': myisamchk. (*Note `REPAIR
TABLE': repair-table. does not implement all the options of *Note
`myisamchk': myisamchk.) With *Note `myisamchk --safe-recover':
myisamchk, you can also use options that *Note `REPAIR TABLE':
repair-table. does not support, such as `--max-record-length'.

If you use the `QUICK' option, *Note `REPAIR TABLE': repair-table.
tries to repair only the index file, and not the data file. This type
of repair is like that done by *Note `myisamchk --recover --quick':
myisamchk.

If you use the `EXTENDED' option, MySQL creates the index row by row
instead of creating one index at a time with sorting. This type of
repair is like that done by *Note `myisamchk --safe-recover': myisamchk.

The `USE_FRM' option is available for use if the `.MYI' index file is
missing or if its header is corrupted. This option tells MySQL not to
trust the information in the `.MYI' file header and to re-create it
using information from the `.frm' file. This kind of repair cannot be
done with *Note `myisamchk': myisamchk.

*Note*:

Use the `USE_FRM' option _only_ if you cannot use regular `REPAIR'
modes! Telling the server to ignore the `.MYI' file makes important
table metadata stored in the `.MYI' unavailable to the repair process,
which can have deleterious consequences:

   * The current `AUTO_INCREMENT' value is lost.

   * The link to deleted records in the table is lost, which means that
     free space for deleted records will remain unoccupied thereafter.

   * The `.MYI' header indicates whether the table is compressed. If
     the server ignores this information, it cannot tell that a table
     is compressed and repair can cause change or loss of table
     contents. This means that `USE_FRM' should not be used with
     compressed tables. That should not be necessary, anyway:
     Compressed tables are read only, so they should not become corrupt.

*Caution*:

If you use `USE_FRM' for a table that was created by a different
version of the MySQL server than the one you are currently running,
*Note `REPAIR TABLE': repair-table. will not attempt to repair the
table. In this case, the result set returned by *Note `REPAIR TABLE':
repair-table. contains a line with a `Msg_type' value of `error' and a
`Msg_text' value of `Failed repairing incompatible .FRM file'.

If `USE_FRM' is _not_ used, *Note `REPAIR TABLE': repair-table. checks
the table to see whether an upgrade is required. If so, it performs the
upgrade, following the same rules as *Note `CHECK TABLE ... FOR
UPGRADE': check-table. See *Note check-table::, for more information.
*Note `REPAIR TABLE': repair-table. without `USE_FRM' upgrades the
`.frm' file to the current version.

By default, the server writes *Note `REPAIR TABLE': repair-table.
statements to the binary log so that they replicate to replication
slaves. To suppress logging, specify the optional `NO_WRITE_TO_BINLOG'
keyword or its alias `LOCAL'.

*Important*:

In the event that a table on the master becomes corrupted and you run
*Note `REPAIR TABLE': repair-table. on it, any resulting changes to the
original table are _not_ propagated to slaves.

You may be able to increase *Note `REPAIR TABLE': repair-table.
performance by setting certain system variables.  See *Note
repair-table-speed::.

As of MySQL 5.5.6, *Note `REPAIR TABLE': repair-table.  table catches
and throws any errors that occur while copying table statistics from
the old corrupted file to the newly created file. For example. if the
user ID of the owner of the `.frm', `.MYD', or `.MYI' file is different
from the user ID of the *Note `mysqld': mysqld. process, *Note `REPAIR
TABLE': repair-table. generates a "cannot change ownership of the file"
error unless *Note `mysqld': mysqld. is started by the `root' user.


File: manual.info,  Node: plugin-sql,  Next: set-statement,  Prev: table-maintenance-sql,  Up: sql-syntax-server-administration

13.7.3 Plugin and User-Defined Function Statements
--------------------------------------------------

* Menu:

* create-function-udf::          `CREATE FUNCTION' Syntax for User-Defined Functions
* drop-function-udf::            `DROP FUNCTION' Syntax
* install-plugin::               `INSTALL PLUGIN' Syntax
* uninstall-plugin::             `UNINSTALL PLUGIN' Syntax


File: manual.info,  Node: create-function-udf,  Next: drop-function-udf,  Prev: plugin-sql,  Up: plugin-sql

13.7.3.1 `CREATE FUNCTION' Syntax for User-Defined Functions
............................................................

     CREATE [AGGREGATE] FUNCTION FUNCTION_NAME RETURNS {STRING|INTEGER|REAL|DECIMAL}
         SONAME SHARED_LIBRARY_NAME

A user-defined function (UDF) is a way to extend MySQL with a new
function that works like a native (built-in) MySQL function such as
`ABS()' or `CONCAT()'.

FUNCTION_NAME is the name that should be used in SQL statements to
invoke the function. The `RETURNS' clause indicates the type of the
function's return value. *Note `DECIMAL': fixed-point-types.  is a
legal value after `RETURNS', but currently *Note `DECIMAL':
fixed-point-types. functions return string values and should be written
like `STRING' functions.

SHARED_LIBRARY_NAME is the basename of the shared object file that
contains the code that implements the function. The file must be
located in the plugin directory.  This directory is given by the value
of the `plugin_dir' system variable. For more information, see *Note
udf-compiling::.

To create a function, you must have the `INSERT' privilege for the
`mysql' database. This is necessary because *Note `CREATE FUNCTION':
create-function. adds a row to the `mysql.func' system table that
records the function's name, type, and shared library name. If you do
not have this table, you should run the *Note `mysql_upgrade':
mysql-upgrade. command to create it. See *Note mysql-upgrade::.

An active function is one that has been loaded with *Note `CREATE
FUNCTION': create-function. and not removed with *Note `DROP FUNCTION':
drop-function. All active functions are reloaded each time the server
starts, unless you start *Note `mysqld': mysqld. with the
`--skip-grant-tables' option. In this case, UDF initialization is
skipped and UDFs are unavailable.

For instructions on writing user-defined functions, see *Note
adding-udf::. For the UDF mechanism to work, functions must be written
in C or C++ (or another language that can use C calling conventions),
your operating system must support dynamic loading and you must have
compiled *Note `mysqld': mysqld. dynamically (not statically).

An `AGGREGATE' function works exactly like a native MySQL aggregate
(summary) function such as `SUM' or `COUNT()'. For `AGGREGATE' to work,
your `mysql.func' table must contain a `type' column. If your
`mysql.func' table does not have this column, you should run the *Note
`mysql_upgrade': mysql-upgrade. program to create it (see *Note
mysql-upgrade::).

*Note*:

To upgrade the shared library associated with a UDF, issue a *Note
`DROP FUNCTION': drop-function. statement, upgrade the shared library,
and then issue a *Note `CREATE FUNCTION': create-function. statement. If
you upgrade the shared library first and then use *Note `DROP
FUNCTION': drop-function, the server may crash.


File: manual.info,  Node: drop-function-udf,  Next: install-plugin,  Prev: create-function-udf,  Up: plugin-sql

13.7.3.2 `DROP FUNCTION' Syntax
...............................

     DROP FUNCTION FUNCTION_NAME

This statement drops the user-defined function (UDF) named
FUNCTION_NAME.

To drop a function, you must have the `DELETE' privilege for the
`mysql' database. This is because *Note `DROP FUNCTION': drop-function.
removes a row from the `mysql.func' system table that records the
function's name, type, and shared library name.

*Note*:

To upgrade the shared library associated with a UDF, issue a *Note
`DROP FUNCTION': drop-function. statement, upgrade the shared library,
and then issue a *Note `CREATE FUNCTION': create-function. statement. If
you upgrade the shared library first and then use *Note `DROP
FUNCTION': drop-function, the server may crash.

*Note `DROP FUNCTION': drop-function. is also used to drop stored
functions (see *Note drop-procedure::).


File: manual.info,  Node: install-plugin,  Next: uninstall-plugin,  Prev: drop-function-udf,  Up: plugin-sql

13.7.3.3 `INSTALL PLUGIN' Syntax
................................

     INSTALL PLUGIN PLUGIN_NAME SONAME 'SHARED_LIBRARY_NAME'

This statement installs a server plugin. It requires the `INSERT
privilege' for the `mysql.plugin' table.

PLUGIN_NAME is the name of the plugin as defined in the plugin
descriptor structure contained in the library file (see *Note
plugin-data-structures::).  Plugin names are not case sensitive. For
maximal compatibility, plugin names should be limited to ASCII letters,
digits, and underscore because they are used in C source files, shell
command lines, M4 and Bourne shell scripts, and SQL environments.

SHARED_LIBRARY_NAME is the name of the shared library that contains the
plugin code. The name includes the file name extension (for example,
`libmyplugin.so', `libmyplugin.dll', or `libmyplugin.dylib').

The shared library must be located in the plugin directory (the
directory named by the `plugin_dir' system variable).  The library must
be in the plugin directory itself, not in a subdirectory. By default,
`plugin_dir' is the `plugin' directory under the directory named by the
`pkglibdir' configuration variable, but it can be changed by setting
the value of `plugin_dir' at server startup.  For example, set its
value in a `my.cnf' file:

     [mysqld]
     plugin_dir=/PATH/TO/PLUGIN/DIRECTORY

If the value of `plugin_dir' is a relative path name, it is taken to be
relative to the MySQL base directory (the value of the `basedir' system
variable).

*Note `INSTALL PLUGIN': install-plugin. loads and initializes the
plugin code to make the plugin available for use. A plugin is
initialized by executing its initialization function, which handles any
setup that the plugin must perform before it can be used. When the
server shuts down, it executes the deinitialization function for each
plugin that is loaded so that the plugin has a change to perform any
final cleanup.

*Note `INSTALL PLUGIN': install-plugin. also registers the plugin by
adding a line that indicates the plugin name and library file name to
the `mysql.plugin' table.  At server startup, the server loads and
initializes any plugin that is listed in the `mysql.plugin' table.
This means that a plugin is installed with *Note `INSTALL PLUGIN':
install-plugin. only once, not every time the server starts. Plugin
loading at startup does not occur if the server is started with the
`--skip-grant-tables' option.

A plugin library can contain multiple plugins. For each of them to be
installed, use a separate *Note `INSTALL PLUGIN': install-plugin.
statement. Each statement names a different plugin, but all of them
specify the same library name.

*Note `INSTALL PLUGIN': install-plugin. causes the server to read
option (`my.cnf') files just as during server startup. This enables the
plugin to pick up any relevant options from those files. It is possible
to add plugin options to an option file even before loading a plugin
(if the `loose' prefix is used). It is also possible to uninstall a
plugin, edit `my.cnf', and install the plugin again. Restarting the
plugin this way enables it to the new option values without a server
restart.

For options that control individual plugin loading at server startup,
see *Note server-plugin-loading::. If you need to load plugins for a
single server startup when the `--skip-grant-tables' option is given
(which tells the server not to read system tables), use the
`--plugin-load' option. See *Note server-options::.

To remove a plugin, use the *Note `UNINSTALL PLUGIN': uninstall-plugin.
statement.

For additional information about plugin loading, see *Note
server-plugin-loading::.

To see what plugins are installed, use the *Note `SHOW PLUGINS':
show-plugins. statement or query the *Note
`INFORMATION_SCHEMA.PLUGINS': plugins-table.  table.

If you recompile a plugin library and need to reinstall it, you can use
either of the following methods:

   * Use *Note `UNINSTALL PLUGIN': uninstall-plugin. to uninstall all
     plugins in the library, install the new plugin library file in the
     plugin directory, and then use *Note `INSTALL PLUGIN':
     install-plugin. to install all plugins in the library. This
     procedure has the advantage that it can be used without stopping
     the server. However, if the plugin library contains many plugins,
     you must issue many *Note `INSTALL PLUGIN': install-plugin. and
     *Note `UNINSTALL PLUGIN': uninstall-plugin. statements.

   * Stop the server, install the new plugin library file in the plugin
     directory, and restart the server.


File: manual.info,  Node: uninstall-plugin,  Prev: install-plugin,  Up: plugin-sql

13.7.3.4 `UNINSTALL PLUGIN' Syntax
..................................

     UNINSTALL PLUGIN PLUGIN_NAME

This statement removes an installed server plugin. It requires the
`DELETE' privilege for the `mysql.plugin' table.

PLUGIN_NAME must be the name of some plugin that is listed in the
`mysql.plugin' table. The server executes the plugin's deinitialization
function and removes the row for the plugin from the `mysql.plugin'
table, so that subsequent server restarts will not load and initialize
the plugin.  *Note `UNINSTALL PLUGIN': uninstall-plugin. does not remove
the plugin's shared library file.

You cannot uninstall a plugin if any table that uses it is open.

Plugin removal has implications for the use of associated tables. For
example, if a full-text parser plugin is associated with a `FULLTEXT'
index on the table, uninstalling the plugin makes the table unusable.
Any attempt to access the table results in an error. The table cannot
even be opened, so you cannot drop an index for which the plugin is
used. This means that uninstalling a plugin is something to do with
care unless you do not care about the table contents. If you are
uninstalling a plugin with no intention of reinstalling it later and
you care about the table contents, you should dump the table with *Note
`mysqldump': mysqldump. and remove the `WITH PARSER' clause from the
dumped *Note `CREATE TABLE': create-table. statement so that you can
reload the table later. If you do not care about the table, *Note `DROP
TABLE': drop-table. can be used even if any plugins associated with the
table are missing.

For additional information about plugin loading, see *Note
server-plugin-loading::.


File: manual.info,  Node: set-statement,  Next: show,  Prev: plugin-sql,  Up: sql-syntax-server-administration

13.7.4 `SET' Syntax
-------------------

     SET VARIABLE_ASSIGNMENT [, VARIABLE_ASSIGNMENT] ...

     VARIABLE_ASSIGNMENT:
           USER_VAR_NAME = EXPR
         | [GLOBAL | SESSION] SYSTEM_VAR_NAME = EXPR
         | [@@global. | @@session. | @@]SYSTEM_VAR_NAME = EXPR

The *Note `SET': set-statement.  statement assigns values to different
types of variables that affect the operation of the server or your
client. Older versions of MySQL employed `SET OPTION', but this syntax
is deprecated in favor of *Note `SET': set-statement.  without `OPTION'.

This section describes use of *Note `SET': set-statement. for assigning
values to variables. The *Note `SET': set-statement.  statement can be
used to assign values to these types of variables:

   * System variables. See *Note server-system-variables::. System
     variables also can be set at server startup, as described in *Note
     using-system-variables::.

     User-defined variables. See *Note user-variables::.

   * Stored procedure and function parameters, and stored program local
     variables. See *Note stored-program-variables::.

Some variants of *Note `SET': set-statement.  syntax are used in other
contexts:

   * `SET CHARACTER SET' and `SET NAMES' assign values to character set
     and collation variables associated with the connection to the
     server.  `SET ONE_SHOT' is used for replication. These variants
     are described later in this section.

   * *Note `SET PASSWORD': set-password. assigns account passwords. See
     *Note set-password::.

   * *Note `SET TRANSACTION ISOLATION LEVEL': set-transaction. sets the
     isolation level for transaction processing. See *Note
     set-transaction::.

The following discussion shows the different *Note `SET': set-statement.
syntaxes that you can use to set variables. The examples use the `='
assignment operator, but you can also use the `:=' assignment operator
for this purpose.

A user variable is written as `@VAR_NAME' and can be set as follows:

     SET @VAR_NAME = EXPR;

Many system variables are dynamic and can be changed while the server
runs by using the *Note `SET': set-statement.  statement. For a list,
see *Note dynamic-system-variables::. To change a system variable with
*Note `SET': set-statement, refer to it as VAR_NAME, optionally
preceded by a modifier:

   * To indicate explicitly that a variable is a global variable,
     precede its name by `GLOBAL' or `@@global.'. The `SUPER' privilege
     is required to set global variables.

   * To indicate explicitly that a variable is a session variable,
     precede its name by `SESSION', `@@session.', or `@@'.  Setting a
     session variable requires no special privilege, but a client can
     change only its own session variables, not those of any other
     client.

   * `LOCAL' and `@@local.' are synonyms for `SESSION' and `@@session.'.

   * If no modifier is present, *Note `SET': set-statement.  changes
     the session variable.

A *Note `SET': set-statement.  statement can contain multiple variable
assignments, separated by commas. For example, the statement can assign
values to a user-defined variable and a system variable. If you set
several system variables, the most recent `GLOBAL' or `SESSION'
modifier in the statement is used for following variables that have no
modifier specified.

Examples:

     SET sort_buffer_size=10000;
     SET @@local.sort_buffer_size=10000;
     SET GLOBAL sort_buffer_size=1000000, SESSION sort_buffer_size=1000000;
     SET @@sort_buffer_size=1000000;
     SET @@global.sort_buffer_size=1000000, @@local.sort_buffer_size=1000000;

The `@@VAR_NAME' syntax for system variables is supported for
compatibility with some other database systems.

If you change a session system variable, the value remains in effect
until your session ends or until you change the variable to a different
value. The change is not visible to other clients.

If you change a global system variable, the value is remembered and
used for new connections until the server restarts. (To make a global
system variable setting permanent, you should set it in an option
file.) The change is visible to any client that accesses that global
variable. However, the change affects the corresponding session
variable only for clients that connect after the change. The global
variable change does not affect the session variable for any client
that is currently connected (not even that of the client that issues the
*Note `SET GLOBAL': set-statement. statement).

To prevent incorrect usage, MySQL produces an error if you use *Note
`SET GLOBAL': set-statement. with a variable that can only be used with
*Note `SET SESSION': set-statement. or if you do not specify `GLOBAL'
(or `@@global.') when setting a global variable.

To set a `SESSION' variable to the `GLOBAL' value or a `GLOBAL' value
to the compiled-in MySQL default value, use the `DEFAULT' keyword. For
example, the following two statements are identical in setting the
session value of `max_join_size' to the global value:

     SET max_join_size=DEFAULT;
     SET @@session.max_join_size=@@global.max_join_size;

Not all system variables can be set to `DEFAULT'.  In such cases, use
of `DEFAULT' results in an error.

It is not permitted to assign the value `DEFAULT' to user-defined
variables, and not supported for stored procedure or function
parameters or stored program local variables. This results in a syntax
error for user-defined variables, and the results are undefined for
parameters or local variables.

You can refer to the values of specific global or session system
variables in expressions by using one of the `@@'-modifiers. For
example, you can retrieve values in a *Note `SELECT': select. statement
like this:

     SELECT @@global.sql_mode, @@session.sql_mode, @@sql_mode;

When you refer to a system variable in an expression as `@@VAR_NAME'
(that is, when you do not specify `@@global.' or `@@session.'), MySQL
returns the session value if it exists and the global value otherwise.
(This differs from `SET @@VAR_NAME = VALUE', which always refers to the
session value.)

*Note*:

Some variables displayed by `SHOW VARIABLES' may not be available using
`SELECT @@VAR_NAME' syntax; an `Unknown system variable' occurs. As a
workaround in such cases, you can use `SHOW VARIABLES LIKE 'VAR_NAME''.

Suffixes for specifying a value multiplier can be used when setting a
variable at server startup, but not to set the value with *Note `SET':
set-statement.  at runtime. On the other hand, with *Note `SET':
set-statement. you can assign a variable's value using an expression,
which is not true when you set a variable at server startup. For
example, the first of the following lines is legal at server startup,
but the second is not:

     shell> mysql --max_allowed_packet=16M
     shell> mysql --max_allowed_packet=16*1024*1024

Conversely, the second of the following lines is legal at runtime, but
the first is not:

     mysql> SET GLOBAL max_allowed_packet=16M;
     mysql> SET GLOBAL max_allowed_packet=16*1024*1024;

To display system variables names and values, use the *Note `SHOW
VARIABLES': show-variables. statement. (See *Note show-variables::.)

The following list describes *Note `SET': set-statement.  options that
have nonstandard syntax (that is, options that are not set with `NAME =
VALUE' syntax).

   * `CHARACTER SET {CHARSET_NAME | DEFAULT}'

     This maps all strings from and to the client with the given
     mapping. You can add new mappings by editing `sql/convert.cc' in
     the MySQL source distribution. `SET CHARACTER SET' sets three
     session system variables: `character_set_client' and
     `character_set_results' are set to the given character set, and
     `character_set_connection' to the value of
     `character_set_database'. See *Note charset-connection::.

     The default mapping can be restored by using the value `DEFAULT'.
     The default depends on the server configuration.

     `ucs2', `utf16', and `utf32' cannot be used as a client character
     set, which means that they do not work for `SET CHARACTER SET'.

   * `NAMES {'CHARSET_NAME' [COLLATE 'COLLATION_NAME'] | DEFAULT}'

     `SET NAMES' sets the three session system variables
     `character_set_client', `character_set_connection', and
     `character_set_results' to the given character set. Setting
     `character_set_connection' to `charset_name' also sets
     `collation_connection' to the default collation for
     `charset_name'. The optional `COLLATE' clause may be used to
     specify a collation explicitly. See *Note charset-connection::.

     The default mapping can be restored by using a value of `DEFAULT'.
     The default depends on the server configuration.

     `ucs2', `utf16', and `utf32' cannot be used as a client character
     set, which means that they do not work for `SET NAMES'.

   * `ONE_SHOT'

     This option is a modifier, not a variable. It is _only_ for
     internal use for replication: *Note `mysqlbinlog': mysqlbinlog.
     uses `SET ONE_SHOT' to modify temporarily the values of character
     set, collation, and time zone variables to reflect at rollforward
     what they were originally.  `ONE_SHOT' is for internal use only
     and is deprecated for MySQL 5.0 and up.

     `ONE_SHOT' is intended for use only with the permitted set of
     variables. It changes the variables as requested, but only for the
     next non-*Note `SET': set-statement.  statement. After that, the
     server resets all character set, collation, and time zone-related
     system variables to their previous values. Example:

          mysql> SET ONE_SHOT character_set_connection = latin5;

          mysql> SET ONE_SHOT collation_connection = latin5_turkish_ci;

          mysql> SHOW VARIABLES LIKE '%_connection';
          +--------------------------+-------------------+
          | Variable_name            | Value             |
          +--------------------------+-------------------+
          | character_set_connection | latin5            |
          | collation_connection     | latin5_turkish_ci |
          +--------------------------+-------------------+

          mysql> SHOW VARIABLES LIKE '%_connection';
          +--------------------------+-------------------+
          | Variable_name            | Value             |
          +--------------------------+-------------------+
          | character_set_connection | latin1            |
          | collation_connection     | latin1_swedish_ci |
          +--------------------------+-------------------+


File: manual.info,  Node: show,  Next: other-administrative-sql,  Prev: set-statement,  Up: sql-syntax-server-administration

13.7.5 `SHOW' Syntax
--------------------

* Menu:

* show-authors::                 `SHOW AUTHORS' Syntax
* show-binary-logs::             `SHOW BINARY LOGS' Syntax
* show-binlog-events::           `SHOW BINLOG EVENTS' Syntax
* show-character-set::           `SHOW CHARACTER SET' Syntax
* show-collation::               `SHOW COLLATION' Syntax
* show-columns::                 `SHOW COLUMNS' Syntax
* show-contributors::            `SHOW CONTRIBUTORS' Syntax
* show-create-database::         `SHOW CREATE DATABASE' Syntax
* show-create-event::            `SHOW CREATE EVENT' Syntax
* show-create-function::         `SHOW CREATE FUNCTION' Syntax
* show-create-procedure::        `SHOW CREATE PROCEDURE' Syntax
* show-create-table::            `SHOW CREATE TABLE' Syntax
* show-create-trigger::          `SHOW CREATE TRIGGER' Syntax
* show-create-view::             `SHOW CREATE VIEW' Syntax
* show-databases::               `SHOW DATABASES' Syntax
* show-engine::                  `SHOW ENGINE' Syntax
* show-engines::                 `SHOW ENGINES' Syntax
* show-errors::                  `SHOW ERRORS' Syntax
* show-events::                  `SHOW EVENTS' Syntax
* show-function-code::           `SHOW FUNCTION CODE' Syntax
* show-function-status::         `SHOW FUNCTION STATUS' Syntax
* show-grants::                  `SHOW GRANTS' Syntax
* show-index::                   `SHOW INDEX' Syntax
* show-master-status::           `SHOW MASTER STATUS' Syntax
* show-open-tables::             `SHOW OPEN TABLES' Syntax
* show-plugins::                 `SHOW PLUGINS' Syntax
* show-privileges::              `SHOW PRIVILEGES' Syntax
* show-procedure-code::          `SHOW PROCEDURE CODE' Syntax
* show-procedure-status::        `SHOW PROCEDURE STATUS' Syntax
* show-processlist::             `SHOW PROCESSLIST' Syntax
* show-profile::                 `SHOW PROFILE' Syntax
* show-profiles::                `SHOW PROFILES' Syntax
* show-relaylog-events::         `SHOW RELAYLOG EVENTS' Syntax
* show-slave-hosts::             `SHOW SLAVE HOSTS' Syntax
* show-slave-status::            `SHOW SLAVE STATUS' Syntax
* show-status::                  `SHOW STATUS' Syntax
* show-table-status::            `SHOW TABLE STATUS' Syntax
* show-tables::                  `SHOW TABLES' Syntax
* show-triggers::                `SHOW TRIGGERS' Syntax
* show-variables::               `SHOW VARIABLES' Syntax
* show-warnings::                `SHOW WARNINGS' Syntax

*Note `SHOW': show. has many forms that provide information about
databases, tables, columns, or status information about the server.
This section describes those following:

     SHOW AUTHORS
     SHOW {BINARY | MASTER} LOGS
     SHOW BINLOG EVENTS [IN 'LOG_NAME'] [FROM POS] [LIMIT [OFFSET,] ROW_COUNT]
     SHOW CHARACTER SET [LIKE_OR_WHERE]
     SHOW COLLATION [LIKE_OR_WHERE]
     SHOW [FULL] COLUMNS FROM TBL_NAME [FROM DB_NAME] [LIKE_OR_WHERE]
     SHOW CONTRIBUTORS
     SHOW CREATE DATABASE DB_NAME
     SHOW CREATE EVENT EVENT_NAME
     SHOW CREATE FUNCTION FUNC_NAME
     SHOW CREATE PROCEDURE PROC_NAME
     SHOW CREATE TABLE TBL_NAME
     SHOW CREATE TRIGGER TRIGGER_NAME
     SHOW CREATE VIEW VIEW_NAME
     SHOW DATABASES [LIKE_OR_WHERE]
     SHOW ENGINE ENGINE_NAME {STATUS | MUTEX}
     SHOW [STORAGE] ENGINES
     SHOW ERRORS [LIMIT [OFFSET,] ROW_COUNT]
     SHOW EVENTS
     SHOW FUNCTION CODE FUNC_NAME
     SHOW FUNCTION STATUS [LIKE_OR_WHERE]
     SHOW GRANTS FOR USER
     SHOW INDEX FROM TBL_NAME [FROM DB_NAME]
     SHOW MASTER STATUS
     SHOW OPEN TABLES [FROM DB_NAME] [LIKE_OR_WHERE]
     SHOW PLUGINS
     SHOW PROCEDURE CODE PROC_NAME
     SHOW PROCEDURE STATUS [LIKE_OR_WHERE]
     SHOW PRIVILEGES
     SHOW [FULL] PROCESSLIST
     SHOW PROFILE [TYPES] [FOR QUERY N] [OFFSET N] [LIMIT N]
     SHOW PROFILES
     SHOW SLAVE HOSTS
     SHOW SLAVE STATUS
     SHOW [GLOBAL | SESSION] STATUS [LIKE_OR_WHERE]
     SHOW TABLE STATUS [FROM DB_NAME] [LIKE_OR_WHERE]
     SHOW [FULL] TABLES [FROM DB_NAME] [LIKE_OR_WHERE]
     SHOW TRIGGERS [FROM DB_NAME] [LIKE_OR_WHERE]
     SHOW [GLOBAL | SESSION] VARIABLES [LIKE_OR_WHERE]
     SHOW WARNINGS [LIMIT [OFFSET,] ROW_COUNT]

     LIKE_OR_WHERE:
         LIKE 'PATTERN'
       | WHERE EXPR

If the syntax for a given *Note `SHOW': show.  statement includes a
`LIKE 'PATTERN'' part, `'PATTERN'' is a string that can contain the SQL
``%'' and ``_'' wildcard characters. The pattern is useful for
restricting statement output to matching values.

Several *Note `SHOW': show. statements also accept a `WHERE' clause
that provides more flexibility in specifying which rows to display. See
*Note extended-show::.

Many MySQL APIs (such as PHP) enable you to treat the result returned
from a *Note `SHOW': show. statement as you would a result set from a
*Note `SELECT': select.; see *Note connectors-apis::, or your API
documentation for more information. In addition, you can work in SQL
with results from queries on tables in the `INFORMATION_SCHEMA'
database, which you cannot easily do with results from *Note `SHOW':
show.  statements. See *Note information-schema::.


File: manual.info,  Node: show-authors,  Next: show-binary-logs,  Prev: show,  Up: show

13.7.5.1 `SHOW AUTHORS' Syntax
..............................

     SHOW AUTHORS

The *Note `SHOW AUTHORS': show-authors. statement displays information
about the people who work on MySQL. For each author, it displays `Name',
`Location', and `Comment' values.

This statement is deprecated as of MySQL 5.5.29 and is removed in MySQL
5.6.


File: manual.info,  Node: show-binary-logs,  Next: show-binlog-events,  Prev: show-authors,  Up: show

13.7.5.2 `SHOW BINARY LOGS' Syntax
..................................

     SHOW BINARY LOGS
     SHOW MASTER LOGS

Lists the binary log files on the server. This statement is used as
part of the procedure described in *Note purge-binary-logs::, that
shows how to determine which logs can be purged.

     mysql> SHOW BINARY LOGS;
     +---------------+-----------+
     | Log_name      | File_size |
     +---------------+-----------+
     | binlog.000015 |    724935 |
     | binlog.000016 |    733481 |
     +---------------+-----------+

*Note `SHOW MASTER LOGS': show-binary-logs. is equivalent to *Note
`SHOW BINARY LOGS': show-binary-logs.

In MySQL 5.5.24 and earlier, the `SUPER' privilege was required to use
this statement. Starting with MySQL 5.5.25, a user with the
`REPLICATION CLIENT' privilege may also execute this statement.


File: manual.info,  Node: show-binlog-events,  Next: show-character-set,  Prev: show-binary-logs,  Up: show

13.7.5.3 `SHOW BINLOG EVENTS' Syntax
....................................

     SHOW BINLOG EVENTS
        [IN 'LOG_NAME'] [FROM POS] [LIMIT [OFFSET,] ROW_COUNT]

Shows the events in the binary log. If you do not specify `'LOG_NAME'',
the first binary log is displayed.

The `LIMIT' clause has the same syntax as for the *Note `SELECT':
select. statement. See *Note select::.

*Note*:

Issuing a *Note `SHOW BINLOG EVENTS': show-binlog-events.  with no
`LIMIT' clause could start a very time- and resource-consuming process
because the server returns to the client the complete contents of the
binary log (which includes all statements executed by the server that
modify data). As an alternative to *Note `SHOW BINLOG EVENTS':
show-binlog-events, use the *Note `mysqlbinlog': mysqlbinlog. utility
to save the binary log to a text file for later examination and
analysis. See *Note mysqlbinlog::.

*Note*:

Some events relating to the setting of user and system variables are
not included in the output from *Note `SHOW BINLOG EVENTS':
show-binlog-events. To get complete coverage of events within a binary
log, use *Note `mysqlbinlog': mysqlbinlog.

*Note*:

*Note `SHOW BINLOG EVENTS': show-binlog-events. does _not_ work with
relay log files. You can use *Note `SHOW RELAYLOG EVENTS':
show-relaylog-events. for this purpose.


File: manual.info,  Node: show-character-set,  Next: show-collation,  Prev: show-binlog-events,  Up: show

13.7.5.4 `SHOW CHARACTER SET' Syntax
....................................

     SHOW CHARACTER SET
         [LIKE 'PATTERN' | WHERE EXPR]

The *Note `SHOW CHARACTER SET': show-character-set. statement shows all
available character sets. The `LIKE' clause, if present, indicates
which character set names to match. The `WHERE' clause can be given to
select rows using more general conditions, as discussed in *Note
extended-show::. For example:

     mysql> SHOW CHARACTER SET LIKE 'latin%';
     +---------+-----------------------------+-------------------+--------+
     | Charset | Description                 | Default collation | Maxlen |
     +---------+-----------------------------+-------------------+--------+
     | latin1  | cp1252 West European        | latin1_swedish_ci |      1 |
     | latin2  | ISO 8859-2 Central European | latin2_general_ci |      1 |
     | latin5  | ISO 8859-9 Turkish          | latin5_turkish_ci |      1 |
     | latin7  | ISO 8859-13 Baltic          | latin7_general_ci |      1 |
     +---------+-----------------------------+-------------------+--------+

The `Maxlen' column shows the maximum number of bytes required to store
one character.


File: manual.info,  Node: show-collation,  Next: show-columns,  Prev: show-character-set,  Up: show

13.7.5.5 `SHOW COLLATION' Syntax
................................

     SHOW COLLATION
         [LIKE 'PATTERN' | WHERE EXPR]

This statement lists collations supported by the server. By default,
the output from *Note `SHOW COLLATION': show-collation. includes all
available collations. The `LIKE' clause, if present, indicates which
collation names to match. The `WHERE' clause can be given to select
rows using more general conditions, as discussed in *Note
extended-show::. For example:

     mysql> SHOW COLLATION LIKE 'latin1%';
     +-------------------+---------+----+---------+----------+---------+
     | Collation         | Charset | Id | Default | Compiled | Sortlen |
     +-------------------+---------+----+---------+----------+---------+
     | latin1_german1_ci | latin1  |  5 |         |          |       0 |
     | latin1_swedish_ci | latin1  |  8 | Yes     | Yes      |       0 |
     | latin1_danish_ci  | latin1  | 15 |         |          |       0 |
     | latin1_german2_ci | latin1  | 31 |         | Yes      |       2 |
     | latin1_bin        | latin1  | 47 |         | Yes      |       0 |
     | latin1_general_ci | latin1  | 48 |         |          |       0 |
     | latin1_general_cs | latin1  | 49 |         |          |       0 |
     | latin1_spanish_ci | latin1  | 94 |         |          |       0 |
     +-------------------+---------+----+---------+----------+---------+

The `Collation' and `Charset' columns indicate the names of the
collation and the character set with which it is associated. `Id' is the
collation ID. `Default' indicates whether the collation is the default
for its character set.  `Compiled' indicates whether the character set
is compiled into the server. `Sortlen' is related to the amount of
memory required to sort strings expressed in the character set.

To see the default collation for each character set, use the following
statement. `Default' is a reserved word, so to use it as an identifier,
it must be quoted as such:

     mysql> SHOW COLLATION WHERE `Default` = 'Yes';
     +---------------------+----------+----+---------+----------+---------+
     | Collation           | Charset  | Id | Default | Compiled | Sortlen |
     +---------------------+----------+----+---------+----------+---------+
     | big5_chinese_ci     | big5     |  1 | Yes     | Yes      |       1 |
     | dec8_swedish_ci     | dec8     |  3 | Yes     | Yes      |       1 |
     | cp850_general_ci    | cp850    |  4 | Yes     | Yes      |       1 |
     | hp8_english_ci      | hp8      |  6 | Yes     | Yes      |       1 |
     | koi8r_general_ci    | koi8r    |  7 | Yes     | Yes      |       1 |
     | latin1_swedish_ci   | latin1   |  8 | Yes     | Yes      |       1 |
     ...


File: manual.info,  Node: show-columns,  Next: show-contributors,  Prev: show-collation,  Up: show

13.7.5.6 `SHOW COLUMNS' Syntax
..............................

     SHOW [FULL] COLUMNS {FROM | IN} TBL_NAME [{FROM | IN} DB_NAME]
         [LIKE 'PATTERN' | WHERE EXPR]

*Note `SHOW COLUMNS': show-columns. displays information about the
columns in a given table. It also works for views. The `LIKE' clause,
if present, indicates which column names to match. The `WHERE' clause
can be given to select rows using more general conditions, as discussed
in *Note extended-show::.

*Note `SHOW COLUMNS': show-columns. displays information only for those
columns for which you have some privilege.

     mysql> SHOW COLUMNS FROM City;
     +------------+----------+------+-----+---------+----------------+
     | Field      | Type     | Null | Key | Default | Extra          |
     +------------+----------+------+-----+---------+----------------+
     | Id         | int(11)  | NO   | PRI | NULL    | auto_increment |
     | Name       | char(35) | NO   |     |         |                |
     | Country    | char(3)  | NO   | UNI |         |                |
     | District   | char(20) | YES  | MUL |         |                |
     | Population | int(11)  | NO   |     | 0       |                |
     +------------+----------+------+-----+---------+----------------+
     5 rows in set (0.00 sec)

If the data types differ from what you expect them to be based on a
*Note `CREATE TABLE': create-table. statement, note that MySQL
sometimes changes data types when you create or alter a table. The
conditions under which this occurs are described in *Note
silent-column-changes::.

The `FULL' keyword causes the output to include the column collation
and comments, as well as the privileges you have for each column.

You can use DB_NAME.TBL_NAME as an alternative to the `TBL_NAME FROM
DB_NAME' syntax. In other words, these two statements are equivalent:

     mysql> SHOW COLUMNS FROM mytable FROM mydb;
     mysql> SHOW COLUMNS FROM mydb.mytable;

*Note `SHOW COLUMNS': show-columns. displays the following values for
each table column:

`Field' indicates the column name.

`Type' indicates the column data type.

`Collation' indicates the collation for nonbinary string columns, or
`NULL' for other columns. This value is displayed only if you use the
`FULL' keyword.

The `Null' field contains `YES' if `NULL' values can be stored in the
column, `NO' if not.

The `Key' field indicates whether the column is indexed:

   * If `Key' is empty, the column either is not indexed or is indexed
     only as a secondary column in a multiple-column, nonunique index.

   * If `Key' is `PRI', the column is a `PRIMARY KEY' or is one of the
     columns in a multiple-column `PRIMARY KEY'.

   * If `Key' is `UNI', the column is the first column of a `UNIQUE'
     index. (A `UNIQUE' index permits multiple `NULL' values, but you
     can tell whether the column permits `NULL' by checking the `Null'
     field.)

   * If `Key' is `MUL', the column is the first column of a nonunique
     index in which multiple occurrences of a given value are permitted
     within the column.

If more than one of the `Key' values applies to a given column of a
table, `Key' displays the one with the highest priority, in the order
`PRI', `UNI', `MUL'.

A `UNIQUE' index may be displayed as `PRI' if it cannot contain `NULL'
values and there is no `PRIMARY KEY' in the table. A `UNIQUE' index may
display as `MUL' if several columns form a composite `UNIQUE' index;
although the combination of the columns is unique, each column can
still hold multiple occurrences of a given value.

The `Default' field indicates the default value that is assigned to the
column. This is `NULL' if the column has an explicit default of `NULL',
or if the column definition has no `DEFAULT' clause.

The `Extra' field contains any additional information that is available
about a given column. The value is nonempty in these cases:
`auto_increment' for columns that have the `AUTO_INCREMENT' attribute;
`on update CURRENT_TIMESTAMP' for *Note `TIMESTAMP': datetime. columns
that have the `ON UPDATE CURRENT_TIMESTAMP' attribute.

`Privileges' indicates the privileges you have for the column. This
value is displayed only if you use the `FULL' keyword.

`Comment' indicates any comment the column has.  This value is
displayed only if you use the `FULL' keyword.

`SHOW FIELDS' is a synonym for *Note `SHOW COLUMNS': show-columns. You
can also list a table's columns with the *Note `mysqlshow DB_NAME
TBL_NAME': mysqlshow. command.

The *Note `DESCRIBE': describe. statement provides information similar
to *Note `SHOW COLUMNS': show-columns. See *Note describe::.

The *Note `SHOW CREATE TABLE': show-create-table, *Note `SHOW TABLE
STATUS': show-table-status, and *Note `SHOW INDEX': show-index.
statements also provide information about tables. See *Note show::.


File: manual.info,  Node: show-contributors,  Next: show-create-database,  Prev: show-columns,  Up: show

13.7.5.7 `SHOW CONTRIBUTORS' Syntax
...................................

     SHOW CONTRIBUTORS

The *Note `SHOW CONTRIBUTORS': show-contributors. statement displays
information about the people who contribute to MySQL source or to
causes that we support. For each contributor, it displays `Name',
`Location', and `Comment' values.

This statement is deprecated as of MySQL 5.5.29 and is removed in MySQL
5.6.


File: manual.info,  Node: show-create-database,  Next: show-create-event,  Prev: show-contributors,  Up: show

13.7.5.8 `SHOW CREATE DATABASE' Syntax
......................................

     SHOW CREATE {DATABASE | SCHEMA} [IF NOT EXISTS] DB_NAME

Shows the *Note `CREATE DATABASE': create-database.  statement that
creates the named database. If the `SHOW' statement includes an `IF NOT
EXISTS' clause, the output too includes such a clause.  *Note `SHOW
CREATE SCHEMA': show-create-database. is a synonym for *Note `SHOW
CREATE DATABASE': show-create-database.

     mysql> SHOW CREATE DATABASE test\G
     *************************** 1. row ***************************
            Database: test
     Create Database: CREATE DATABASE `test`
                      /*!40100 DEFAULT CHARACTER SET latin1 */

     mysql> SHOW CREATE SCHEMA test\G
     *************************** 1. row ***************************
            Database: test
     Create Database: CREATE DATABASE `test`
                      /*!40100 DEFAULT CHARACTER SET latin1 */

*Note `SHOW CREATE DATABASE': show-create-database. quotes table and
column names according to the value of the `sql_quote_show_create'
option.  See *Note server-system-variables::.


File: manual.info,  Node: show-create-event,  Next: show-create-function,  Prev: show-create-database,  Up: show

13.7.5.9 `SHOW CREATE EVENT' Syntax
...................................

     SHOW CREATE EVENT EVENT_NAME

This statement displays the *Note `CREATE EVENT': create-event.
statement needed to re-create a given event. It requires the `EVENT'
privilege for the database from which the event is to be shown. For
example (using the same event `e_daily' defined and then altered in
*Note show-events::):

     mysql> SHOW CREATE EVENT test.e_daily\G
     *************************** 1. row ***************************
                    Event: e_daily
                 sql_mode:
                time_zone: SYSTEM
             Create Event: CREATE EVENT `e_daily`
                             ON SCHEDULE EVERY 1 DAY
                             STARTS CURRENT_TIMESTAMP + INTERVAL 6 HOUR
                             ON COMPLETION NOT PRESERVE
                             ENABLE
                             COMMENT 'Saves total number of sessions then
                                     clears the table each day'
                             DO BEGIN
                               INSERT INTO site_activity.totals (time, total)
                                 SELECT CURRENT_TIMESTAMP, COUNT(*)
                                 FROM site_activity.sessions;
                               DELETE FROM site_activity.sessions;
                             END
     character_set_client: latin1
     collation_connection: latin1_swedish_ci
       Database Collation: latin1_swedish_ci

`character_set_client' is the session value of the
`character_set_client' system variable when the event was created.
`collation_connection' is the session value of the
`collation_connection' system variable when the event was created.
`Database Collation' is the collation of the database with which the
event is associated.

Note that the output reflects the current status of the event
(`ENABLE') rather than the status with which it was created.


File: manual.info,  Node: show-create-function,  Next: show-create-procedure,  Prev: show-create-event,  Up: show

13.7.5.10 `SHOW CREATE FUNCTION' Syntax
.......................................

     SHOW CREATE FUNCTION FUNC_NAME

This statement is similar to *Note `SHOW CREATE PROCEDURE':
show-create-procedure. but for stored functions. See *Note
show-create-procedure::.


File: manual.info,  Node: show-create-procedure,  Next: show-create-table,  Prev: show-create-function,  Up: show

13.7.5.11 `SHOW CREATE PROCEDURE' Syntax
........................................

     SHOW CREATE PROCEDURE PROC_NAME

This statement is a MySQL extension. It returns the exact string that
can be used to re-create the named stored procedure. A similar
statement, *Note `SHOW CREATE FUNCTION': show-create-function, displays
information about stored functions (see *Note show-create-function::).

Both statements require that you be the owner of the routine or have
*Note `SELECT': select. access to the `mysql.proc' table. If you do not
have privileges for the routine itself, the value displayed for the
`Create Procedure' or `Create Function' field will be `NULL'.

     mysql> SHOW CREATE PROCEDURE test.simpleproc\G
     *************************** 1. row ***************************
                Procedure: simpleproc
                 sql_mode:
         Create Procedure: CREATE PROCEDURE `simpleproc`(OUT param1 INT)
                           BEGIN
                           SELECT COUNT(*) INTO param1 FROM t;
                           END
     character_set_client: latin1
     collation_connection: latin1_swedish_ci
       Database Collation: latin1_swedish_ci

     mysql> SHOW CREATE FUNCTION test.hello\G
     *************************** 1. row ***************************
                 Function: hello
                 sql_mode:
          Create Function: CREATE FUNCTION `hello`(s CHAR(20))
                           RETURNS CHAR(50)
                           RETURN CONCAT('Hello, ',s,'!')
     character_set_client: latin1
     collation_connection: latin1_swedish_ci
       Database Collation: latin1_swedish_ci

`character_set_client' is the session value of the
`character_set_client' system variable when the routine was created.
`collation_connection' is the session value of the
`collation_connection' system variable when the routine was created.
`Database Collation' is the collation of the database with which the
routine is associated.


File: manual.info,  Node: show-create-table,  Next: show-create-trigger,  Prev: show-create-procedure,  Up: show

13.7.5.12 `SHOW CREATE TABLE' Syntax
....................................

     SHOW CREATE TABLE TBL_NAME

Shows the *Note `CREATE TABLE': create-table. statement that creates
the named table. To use this statement, you must have some privilege
for the table. This statement also works with views.

     mysql> SHOW CREATE TABLE t\G
     *************************** 1. row ***************************
            Table: t
     Create Table: CREATE TABLE t (
       id INT(11) default NULL auto_increment,
       s char(60) default NULL,
       PRIMARY KEY (id)
     ) ENGINE=MyISAM

*Note `SHOW CREATE TABLE': show-create-table. quotes table and column
names according to the value of the `sql_quote_show_create' option.
See *Note server-system-variables::.


File: manual.info,  Node: show-create-trigger,  Next: show-create-view,  Prev: show-create-table,  Up: show

13.7.5.13 `SHOW CREATE TRIGGER' Syntax
......................................

     SHOW CREATE TRIGGER TRIGGER_NAME

This statement shows the *Note `CREATE TRIGGER': create-trigger.
statement that creates the named trigger.

     mysql> SHOW CREATE TRIGGER ins_sum\G
     *************************** 1. row ***************************
                    Trigger: ins_sum
                   sql_mode:
     SQL Original Statement: CREATE DEFINER=`bob`@`localhost` TRIGGER ins_sum
                             BEFORE INSERT ON account
                             FOR EACH ROW SET @sum = @sum + NEW.amount
       character_set_client: latin1
       collation_connection: latin1_swedish_ci
         Database Collation: latin1_swedish_ci

*Note `SHOW CREATE TRIGGER': show-create-trigger. output has the
following columns:

   * `Trigger': The trigger name.

   * `sql_mode': The SQL mode in effect when the trigger executes.

   * `SQL Original Statement': The *Note `CREATE TRIGGER':
     create-trigger. statement that defines the trigger.

   * `character_set_client': The session value of the
     `character_set_client' system variable when the trigger was
     created.

   * `collation_connection': The session value of the
     `collation_connection' system variable when the trigger was
     created.

   * `Database Collation': The collation of the database with which the
     trigger is associated.

You can also obtain information about trigger objects from
`INFORMATION_SCHEMA', which contains a *Note `TRIGGERS':
triggers-table. table. See *Note triggers-table::.


File: manual.info,  Node: show-create-view,  Next: show-databases,  Prev: show-create-trigger,  Up: show

13.7.5.14 `SHOW CREATE VIEW' Syntax
...................................

     SHOW CREATE VIEW VIEW_NAME

This statement shows the *Note `CREATE VIEW': create-view. statement
that creates the named view.

     mysql> SHOW CREATE VIEW v\G
     *************************** 1. row ***************************
                     View: v
              Create View: CREATE ALGORITHM=UNDEFINED
                           DEFINER=`bob`@`localhost`
                           SQL SECURITY DEFINER VIEW
                           `v` AS select 1 AS `a`,2 AS `b`
     character_set_client: latin1
     collation_connection: latin1_swedish_ci

`character_set_client' is the session value of the
`character_set_client' system variable when the view was created.
`collation_connection' is the session value of the
`collation_connection' system variable when the view was created.

Use of *Note `SHOW CREATE VIEW': show-create-view. requires the `SHOW
VIEW' privilege and the `SELECT' privilege for the view in question.

You can also obtain information about view objects from
`INFORMATION_SCHEMA', which contains a *Note `VIEWS': views-table.
table. See *Note views-table::.

MySQL lets you use different `sql_mode' settings to tell the server the
type of SQL syntax to support. For example, you might use the `ANSI'
SQL mode to ensure MySQL correctly interprets the standard SQL
concatenation operator, the double bar (`||'), in your queries. If you
then create a view that concatenates items, you might worry that
changing the `sql_mode' setting to a value different from `ANSI' could
cause the view to become invalid. But this is not the case. No matter
how you write out a view definition, MySQL always stores it the same
way, in a canonical form. Here is an example that shows how the server
changes a double bar concatenation operator to a `CONCAT()' function:

     mysql> SET sql_mode = 'ANSI';
     Query OK, 0 rows affected (0.00 sec)

     mysql> CREATE VIEW test.v AS SELECT 'a' || 'b' as col1;
     Query OK, 0 rows affected (0.01 sec)

     mysql> SHOW CREATE VIEW test.v\G
     *************************** 1. row ***************************
                     View: v
              Create View: CREATE VIEW "v" AS select concat('a','b') AS "col1"
     ...
     1 row in set (0.00 sec)

The advantage of storing a view definition in canonical form is that
changes made later to the value of `sql_mode' will not affect the
results from the view. However an additional consequence is that
comments prior to *Note `SELECT': select. are stripped from the
definition by the server.


File: manual.info,  Node: show-databases,  Next: show-engine,  Prev: show-create-view,  Up: show

13.7.5.15 `SHOW DATABASES' Syntax
.................................

     SHOW {DATABASES | SCHEMAS}
         [LIKE 'PATTERN' | WHERE EXPR]

*Note `SHOW DATABASES': show-databases. lists the databases on the
MySQL server host.  *Note `SHOW SCHEMAS': show-databases. is a synonym
for *Note `SHOW DATABASES': show-databases. The `LIKE' clause, if
present, indicates which database names to match. The `WHERE' clause
can be given to select rows using more general conditions, as discussed
in *Note extended-show::.

You see only those databases for which you have some kind of privilege,
unless you have the global *Note `SHOW DATABASES': show-databases.
privilege. You can also get this list using the *Note `mysqlshow':
mysqlshow. command.

If the server was started with the `--skip-show-database' option, you
cannot use this statement at all unless you have the `SHOW DATABASES'
privilege.

MySQL implements databases as directories in the data directory, so
this statement simply lists directories in that location.  However, the
output may include names of directories that do not correspond to
actual databases.


File: manual.info,  Node: show-engine,  Next: show-engines,  Prev: show-databases,  Up: show

13.7.5.16 `SHOW ENGINE' Syntax
..............................

     SHOW ENGINE ENGINE_NAME {STATUS | MUTEX}

*Note `SHOW ENGINE': show-engine. displays operational information
about a storage engine. The following statements currently are
supported:

     SHOW ENGINE INNODB STATUS
     SHOW ENGINE INNODB MUTEX
     SHOW ENGINE {NDB | NDBCLUSTER} STATUS
     SHOW ENGINE PERFORMANCE_SCHEMA STATUS

*Note `SHOW ENGINE INNODB STATUS': show-engine. displays extensive
information from the standard `InnoDB' Monitor about the state of the
`InnoDB' storage engine. For information about the standard monitor and
other `InnoDB' Monitors that provide information about `InnoDB'
processing, see *Note innodb-monitors::.

*Note `SHOW ENGINE INNODB MUTEX': show-engine. displays `InnoDB' mutex
statistics. Statement output has the following columns:

   * `Type'

     Always `InnoDB'.

   * `Name'

     The source file where the mutex is implemented, and the line
     number in the file where the mutex is created. The line number may
     change depending on your version of MySQL.

   * `Status'

     The mutex status. This field displays several values if
     `UNIV_DEBUG' was defined at MySQL compilation time (for example, in
     `include/univ.i' in the `InnoDB' part of the MySQL source tree). If
     `UNIV_DEBUG' was not defined, the statement displays only the
     `os_waits' value. In the latter case (without UNIV_DEBUG), the
     information on which the output is based is insufficient to
     distinguish regular mutexes and mutexes that protect rw-locks
     (which permit multiple readers or a single writer). Consequently,
     the output may appear to contain multiple rows for the same mutex.

        * `count' indicates how many times the mutex was requested.

        * `spin_waits' indicates how many times the spinlock had to run.

        * `spin_rounds' indicates the number of spinlock rounds.
          (`spin_rounds' divided by `spin_waits' provides the average
          round count.)

        * `os_waits' indicates the number of operating system waits.
          This occurs when the spinlock did not work (the mutex was not
          locked during the spinlock and it was necessary to yield to
          the operating system and wait).

        * `os_yields' indicates the number of times a the thread trying
          to lock a mutex gave up its timeslice and yielded to the
          operating system (on the presumption that permitting other
          threads to run will free the mutex so that it can be locked).

        * `os_wait_times' indicates the amount of time (in ms) spent in
          operating system waits, if the `timed_mutexes' system
          variable is 1 (`ON'). If `timed_mutexes' is 0 (`OFF'), timing
          is disabled, so `os_wait_times' is 0.  `timed_mutexes' is off
          by default.

Information from this statement can be used to diagnose system
problems. For example, large values of `spin_waits' and `spin_rounds'
may indicate scalability problems.

Use *Note `SHOW ENGINE PERFORMANCE_SCHEMA STATUS': show-engine. to
inspect the internal operation of the Performance Schema code:

     mysql> SHOW ENGINE PERFORMANCE_SCHEMA STATUS\G
     ...
     *************************** 3. row ***************************
       Type: performance_schema
       Name: events_waits_history.row_size
     Status: 76
     *************************** 4. row ***************************
       Type: performance_schema
       Name: events_waits_history.row_count
     Status: 10000
     *************************** 5. row ***************************
       Type: performance_schema
       Name: events_waits_history.memory
     Status: 760000
     ...
     *************************** 57. row ***************************
       Type: performance_schema
       Name: performance_schema.memory
     Status: 26459600
     ...

This statement is intended to help the DBA understand the effects that
different Performance Schema options have on memory requirements.

`Name' values consist of two parts, which name an internal buffer and a
buffer attribute, respectively.  Interpret buffer names as follows:

   * An internal buffer that is not exposed as a table is named within
     parentheses. Examples: `(pfs_cond_class).row_size',
     `(pfs_mutex_class).memory'.

   * An internal buffer that is exposed as a table in the
     `performance_schema' database is named after the table, without
     parentheses. Examples: `events_waits_history.row_size',
     `mutex_instances.row_count'.

   * A value that applies to the Performance Schema as a whole begins
     with `performance_schema'. Example: `performance_schema.memory'.

Buffer attributes have these meanings:

   * `row_size' is the size of the internal record used by the
     implementation, such as the size of a row in a table. `row_size'
     values cannot be changed.

   * `row_count' is the number of internal records, such as the number
     of rows in a table.  `row_count' values can be changed using
     Performance Schema configuration options.

   * For a table, `TBL_NAME.memory' is the product of `row_size' and
     `row_count'. For the Performance Schema as a whole,
     `performance_schema.memory' is the sum of all the memory used (the
     sum of all other `memory' values).

In some cases, there is a direct relationship between a Performance
Schema configuration parameter and a `SHOW ENGINE' value. For example,
`events_waits_history_long.row_count' corresponds to
`performance_schema_events_waits_history_long_size'.  In other cases,
the relationship is more complex. For example,
`events_waits_history.row_count' corresponds to
`performance_schema_events_waits_history_size' (the number of rows per
thread) multiplied by `performance_schema_max_thread_instances' ( the
number of threads).

If the server has the *Note `NDBCLUSTER': mysql-cluster.  storage
engine enabled, *Note `SHOW ENGINE NDB STATUS': show-engine. displays
cluster status information such as the number of connected data nodes,
the cluster connectstring, and cluster binlog epochs, as well as counts
of various Cluster API objects created by the MySQL Server when
connected to the cluster. Sample output from this statement is shown
here:

     mysql> SHOW ENGINE NDB STATUS;
     +------------+-----------------------+--------------------------------------------------+
     | Type       | Name                  | Status                                           |
     +------------+-----------------------+--------------------------------------------------+
     | ndbcluster | connection            | cluster_node_id=7,
       connected_host=192.168.0.103, connected_port=1186, number_of_data_nodes=4,
       number_of_ready_data_nodes=3, connect_count=0                                         |
     | ndbcluster | NdbTransaction        | created=6, free=0, sizeof=212                    |
     | ndbcluster | NdbOperation          | created=8, free=8, sizeof=660                    |
     | ndbcluster | NdbIndexScanOperation | created=1, free=1, sizeof=744                    |
     | ndbcluster | NdbIndexOperation     | created=0, free=0, sizeof=664                    |
     | ndbcluster | NdbRecAttr            | created=1285, free=1285, sizeof=60               |
     | ndbcluster | NdbApiSignal          | created=16, free=16, sizeof=136                  |
     | ndbcluster | NdbLabel              | created=0, free=0, sizeof=196                    |
     | ndbcluster | NdbBranch             | created=0, free=0, sizeof=24                     |
     | ndbcluster | NdbSubroutine         | created=0, free=0, sizeof=68                     |
     | ndbcluster | NdbCall               | created=0, free=0, sizeof=16                     |
     | ndbcluster | NdbBlob               | created=1, free=1, sizeof=264                    |
     | ndbcluster | NdbReceiver           | created=4, free=0, sizeof=68                     |
     | ndbcluster | binlog                | latest_epoch=155467, latest_trans_epoch=148126,
       latest_received_binlog_epoch=0, latest_handled_binlog_epoch=0,
       latest_applied_binlog_epoch=0                                                         |
     +------------+-----------------------+--------------------------------------------------+

The rows with `connection' and `binlog' in the `Name' column were added
to the output of this statement in MySQL 5.1. The `Status' column in
each of these rows provides information about the MySQL server's
connection to the cluster and about the cluster binary log's status,
respectively. The `Status' information is in the form of
comma-delimited set of name/value pairs.

The `connection' row's `Status' column contains the name/value pairs
described in the following table.

This table describes name and value pairs found in the `connection' row
`Status' column in the output of the *Note `SHOW ENGINE NDB STATUS':
show-engine. command.

Name                          Value
`cluster_node_id'             The node ID of the MySQL server in the
                              cluster
`connected_host'              The host name or IP address of the cluster
                              management server to which the MySQL
                              server is connected
`connected_port'              The port used by the MySQL server to
                              connect to the management server
                              (`connected_host')
`number_of_data_nodes'        The number of data nodes configured for
                              the cluster (that is, the number of
                              `[ndbd]' sections in the cluster
                              `config.ini' file)
`number_of_ready_data_nodes'  The number of data nodes in the cluster
                              that are actually running
`connect_count'               The number of times this *Note `mysqld':
                              mysqld. has connected or reconnected to
                              cluster data nodes

The `binlog' row's `Status' column contains information relating to
MySQL Cluster Replication. The name/value pairs it contains are
described in the following table.

This table describes name and value pairs found in the `binlog' row
`Status' column in the output of the *Note `SHOW ENGINE NDB STATUS':
show-engine. command.

Name                          Value
`latest_epoch'                The most recent epoch most recently run on
                              this MySQL server (that is, the sequence
                              number of the most recent transaction run
                              on the server)
`latest_trans_epoch'          The most recent epoch processed by the
                              cluster's data nodes
`latest_received_binlog_epoch'The most recent epoch received by the
                              binlog thread
`latest_handled_binlog_epoch' The most recent epoch processed by the
                              binlog thread (for writing to the binlog)
`latest_applied_binlog_epoch' The most recent epoch actually written to
                              the binlog

See *Note mysql-cluster-replication::, for more information.

The remaining rows from the output of *Note `SHOW ENGINE NDB STATUS':
show-engine. which are most likely to prove useful in monitoring the
cluster are listed here by `Name':

   * `NdbTransaction': The number and size of `NdbTransaction' objects
     that have been created. An `NdbTransaction' is created each time a
     table schema operation (such as *Note `CREATE TABLE':
     create-table. or *Note `ALTER TABLE': alter-table.) is performed on
     an *Note `NDB': mysql-cluster. table.

   * `NdbOperation': The number and size of `NdbOperation' objects that
     have been created.

   * `NdbIndexScanOperation': The number and size of
     `NdbIndexScanOperation' objects that have been created.

   * `NdbIndexOperation': The number and size of `NdbIndexOperation'
     objects that have been created.

   * `NdbRecAttr': The number and size of `NdbRecAttr' objects that
     have been created. In general, one of these is created each time a
     data manipulation statement is performed by an SQL node.

   * `NdbBlob': The number and size of `NdbBlob' objects that have been
     created.  An `NdbBlob' is created for each new operation involving
     a *Note `BLOB': blob.  column in an *Note `NDB': mysql-cluster.
     table.

   * `NdbReceiver': The number and size of any `NdbReceiver' object
     that have been created. The number in the `created' column is the
     same as the number of data nodes in the cluster to which the MySQL
     server has connected.

*Note*:

*Note `SHOW ENGINE NDB STATUS': show-engine. returns an empty result if
no operations involving *Note `NDB': mysql-cluster. tables have been
performed during the current session by the MySQL client accessing the
SQL node on which this statement is run.


File: manual.info,  Node: show-engines,  Next: show-errors,  Prev: show-engine,  Up: show

13.7.5.17 `SHOW ENGINES' Syntax
...............................

     SHOW [STORAGE] ENGINES

*Note `SHOW ENGINES': show-engines. displays status information about
the server's storage engines. This is particularly useful for checking
whether a storage engine is supported, or to see what the default
engine is.

     mysql> SHOW ENGINES\G
     *************************** 1. row ***************************
           Engine: MEMORY
          Support: YES
          Comment: Hash based, stored in memory, useful for temporary tables
     Transactions: NO
               XA: NO
       Savepoints: NO
     *************************** 2. row ***************************
           Engine: MyISAM
          Support: YES
          Comment: MyISAM storage engine
     Transactions: NO
               XA: NO
       Savepoints: NO
     *************************** 3. row ***************************
           Engine: InnoDB
          Support: DEFAULT
          Comment: Supports transactions, row-level locking, and foreign keys
     Transactions: YES
               XA: YES
       Savepoints: YES
     *************************** 4. row ***************************
           Engine: EXAMPLE
          Support: YES
          Comment: Example storage engine
     Transactions: NO
               XA: NO
       Savepoints: NO
     *************************** 5. row ***************************
           Engine: ARCHIVE
          Support: YES
          Comment: Archive storage engine
     Transactions: NO
               XA: NO
       Savepoints: NO
     *************************** 6. row ***************************
           Engine: CSV
          Support: YES
          Comment: CSV storage engine
     Transactions: NO
               XA: NO
       Savepoints: NO
     *************************** 7. row ***************************
           Engine: BLACKHOLE
          Support: YES
          Comment: /dev/null storage engine (anything you write »
                   to it disappears)
     Transactions: NO
               XA: NO
       Savepoints: NO
     *************************** 8. row ***************************
           Engine: FEDERATED
          Support: YES
          Comment: Federated MySQL storage engine
     Transactions: NO
               XA: NO
       Savepoints: NO
     *************************** 9. row ***************************
           Engine: MRG_MYISAM
          Support: YES
          Comment: Collection of identical MyISAM tables
     Transactions: NO
               XA: NO
       Savepoints: NO

The output from *Note `SHOW ENGINES': show-engines. may vary according
to the MySQL version used and other factors. The values shown in the
`Support' column indicate the server's level of support for the storage
engine, as shown in the following table.

This table describes values for the `Support' column in the output of
the *Note `SHOW ENGINES': show-engines. command.

Value       Meaning
`YES'       The engine is supported and is active
`DEFAULT'   Like `YES', plus this is the default engine
`NO'        The engine is not supported
`DISABLED'  The engine is supported but has been disabled

A value of `NO' means that the server was compiled without support for
the engine, so it cannot be enabled at runtime.

A value of `DISABLED' occurs either because the server was started with
an option that disables the engine, or because not all options required
to enable it were given. In the latter case, the error log file should
contain a reason indicating why the option is disabled. See *Note
error-log::.

You might also see `DISABLED' for a storage engine if the server was
compiled to support it, but was started with a `--skip-ENGINE_NAME'
option. For the *Note `NDBCLUSTER': mysql-cluster. storage engine,
`DISABLED' means the server was compiled with support for MySQL
Cluster, but was not started with the `--ndbcluster' option.

All MySQL servers support `MyISAM' tables, because `MyISAM' is the
default storage engine.  It is not possible to disable `MyISAM'.

The `Transactions', `XA', and `Savepoints' columns indicate whether the
storage engine supports transactions, XA transactions, and savepoints,
respectively.


File: manual.info,  Node: show-errors,  Next: show-events,  Prev: show-engines,  Up: show

13.7.5.18 `SHOW ERRORS' Syntax
..............................

     SHOW ERRORS [LIMIT [OFFSET,] ROW_COUNT]
     SHOW COUNT(*) ERRORS

*Note `SHOW ERRORS': show-errors. is a diagnostic statement that is
similar to *Note `SHOW WARNINGS': show-warnings, except that it
displays information only for errors, rather than for errors, warnings,
and notes.

The `LIMIT' clause has the same syntax as for the *Note `SELECT':
select. statement. See *Note select::.

The *Note `SHOW COUNT(*) ERRORS': show-errors. statement displays the
number of errors. You can also retrieve this number from the
`error_count' variable:

     SHOW COUNT(*) ERRORS;
     SELECT @@error_count;

*Note `SHOW ERRORS': show-errors. and `error_count' apply only to
errors, not warnings or notes. In other respects, they are similar to
*Note `SHOW WARNINGS': show-warnings. and `warning_count'. In
particular, *Note `SHOW ERRORS': show-errors. cannot display
information for more than `max_error_count' messages, and `error_count'
can exceed the value of `max_error_count' if the number of errors
exceeds `max_error_count'.

For more information, see *Note show-warnings::.


File: manual.info,  Node: show-events,  Next: show-function-code,  Prev: show-errors,  Up: show

13.7.5.19 `SHOW EVENTS' Syntax
..............................

     SHOW EVENTS [{FROM | IN} SCHEMA_NAME]
         [LIKE 'PATTERN' | WHERE EXPR]

This statement displays information about Event Manager events.  It
requires the `EVENT' privilege for the database from which the events
are to be shown.

In its simplest form, *Note `SHOW EVENTS': show-events.  lists all of
the events in the current schema:

     mysql> SELECT CURRENT_USER(), SCHEMA();
     +----------------+----------+
     | CURRENT_USER() | SCHEMA() |
     +----------------+----------+
     | jon@ghidora    | myschema |
     +----------------+----------+
     1 row in set (0.00 sec)

     mysql> SHOW EVENTS\G
     *************************** 1. row ***************************
                       Db: myschema
                     Name: e_daily
                  Definer: jon@ghidora
                Time zone: SYSTEM
                     Type: RECURRING
               Execute at: NULL
           Interval value: 10
           Interval field: SECOND
                   Starts: 2006-02-09 10:41:23
                     Ends: NULL
                   Status: ENABLED
               Originator: 0
     character_set_client: latin1
     collation_connection: latin1_swedish_ci
       Database Collation: latin1_swedish_ci

To see events for a specific schema, use the `FROM' clause. For
example, to see events for the `test' schema, use the following
statement:

     SHOW EVENTS FROM test;

The `LIKE' clause, if present, indicates which event names to match. The
`WHERE' clause can be given to select rows using more general
conditions, as discussed in *Note extended-show::.

*Note `SHOW EVENTS': show-events. output has the following columns:

   * `Db': The schema (database) on which the event is defined.

   * `Name': The name of the event.

   * `Time zone': The event time zone, which is the time zone used for
     scheduling the event and that is in effect within the event as it
     executes. The default value is `SYSTEM'.

   * `Definer': The account of the user who created the event, in
     `'USER_NAME'@'HOST_NAME'' format.

   * `Type': The event repetition type, either `ONE TIME' (transient) or
     `RECURRING' (repeating).

   * `Execute At': The date and time when a transient event is set to
     execute. Shown as a *Note `DATETIME': datetime. value.

     For a recurring event, the value of this column is always `NULL'.

   * `Interval Value': For a recurring event, the number of intervals
     to wait between event executions.

     For a transient event, the value of this column is always `NULL'.

   * `Interval Field': The time units used for the interval which a
     recurring event waits before repeating.

     For a transient event, the value of this column is always `NULL'.

   * `Starts': The start date and time for a recurring event. This is
     displayed as a *Note `DATETIME': datetime. value, and is `NULL' if
     no start date and time are defined for the event.

     For a transient event, this column is always `NULL'.

   * `Ends': The end date and time for a recurring event. This is
     displayed as a *Note `DATETIME': datetime. value, and defaults to
     `NULL' if no end date and time is defined for the event.

     For a transient event, this column is always `NULL'.

   * `Status': The event status. One of `ENABLED', `DISABLED', or
     `SLAVESIDE_DISABLED'.

     `SLAVESIDE_DISABLED' indicates that the creation of the event
     occurred on another MySQL server acting as a replication master
     and replicated to the current MySQL server which is acting as a
     slave, but the event is not presently being executed on the slave.

   * `Originator': The server ID of the MySQL server on which the event
     was created. Defaults to 0.

   * `character_set_client' is the session value of the
     `character_set_client' system variable when the routine was
     created.  `collation_connection' is the session value of the
     `collation_connection' system variable when the routine was
     created.  `Database Collation' is the collation of the database
     with which the routine is associated.

For more information about `SLAVE_DISABLED' and the `Originator'
column, see *Note replication-features-invoked::.

The event action statement is not shown in the output of *Note `SHOW
EVENTS': show-events. Use *Note `SHOW CREATE EVENT': show-create-event.
or the *Note `INFORMATION_SCHEMA.EVENTS': events-table. table.

Times displayed by *Note `SHOW EVENTS': show-events.  are given in the
event time zone, as discussed in *Note events-metadata::.

The columns in the output of *Note `SHOW EVENTS': show-events. are
similar to, but not identical to the columns in the *Note
`INFORMATION_SCHEMA.EVENTS': events-table. table.  See *Note
events-table::.


File: manual.info,  Node: show-function-code,  Next: show-function-status,  Prev: show-events,  Up: show

13.7.5.20 `SHOW FUNCTION CODE' Syntax
.....................................

     SHOW FUNCTION CODE FUNC_NAME

This statement is similar to *Note `SHOW PROCEDURE CODE':
show-procedure-code. but for stored functions. See *Note
show-procedure-code::.


File: manual.info,  Node: show-function-status,  Next: show-grants,  Prev: show-function-code,  Up: show

13.7.5.21 `SHOW FUNCTION STATUS' Syntax
.......................................

     SHOW FUNCTION STATUS
         [LIKE 'PATTERN' | WHERE EXPR]

This statement is similar to *Note `SHOW PROCEDURE STATUS':
show-procedure-status. but for stored functions. See *Note
show-procedure-status::.


File: manual.info,  Node: show-grants,  Next: show-index,  Prev: show-function-status,  Up: show

13.7.5.22 `SHOW GRANTS' Syntax
..............................

     SHOW GRANTS [FOR USER]

This statement lists the *Note `GRANT': grant.  statement or statements
that must be issued to duplicate the privileges that are granted to a
MySQL user account. The account is named using the same format as for
the *Note `GRANT': grant. statement; for example,
`'jeffrey'@'localhost''. If you specify only the user name part of the
account name, a host name part of `'%'' is used. For additional
information about specifying account names, see *Note grant::.

     mysql> SHOW GRANTS FOR 'root'@'localhost';
     +---------------------------------------------------------------------+
     | Grants for root@localhost                                           |
     +---------------------------------------------------------------------+
     | GRANT ALL PRIVILEGES ON *.* TO 'root'@'localhost' WITH GRANT OPTION |
     +---------------------------------------------------------------------+

To list the privileges granted to the account that you are using to
connect to the server, you can use any of the following statements:

     SHOW GRANTS;
     SHOW GRANTS FOR CURRENT_USER;
     SHOW GRANTS FOR CURRENT_USER();

If `SHOW GRANTS FOR CURRENT_USER' (or any of the equivalent syntaxes)
is used in `DEFINER' context, such as within a stored procedure that is
defined with `SQL SECURITY DEFINER'), the grants displayed are those of
the definer and not the invoker.

*Note `SHOW GRANTS': show-grants. displays only the privileges granted
explicitly to the named account. Other privileges might be available to
the account, but they are not displayed. For example, if an anonymous
account exists, the named account might be able to use its privileges,
but *Note `SHOW GRANTS': show-grants. will not display them.

*Note `SHOW GRANTS': show-grants. requires the `SELECT' privilege for
the `mysql' database, except to see the privileges for the current user.


File: manual.info,  Node: show-index,  Next: show-master-status,  Prev: show-grants,  Up: show

13.7.5.23 `SHOW INDEX' Syntax
.............................

     SHOW {INDEX | INDEXES | KEYS}
         {FROM | IN} TBL_NAME
         [{FROM | IN} DB_NAME]
         [WHERE EXPR]

*Note `SHOW INDEX': show-index. returns table index information. The
format resembles that of the `SQLStatistics' call in ODBC. This
statement requires some privilege for any column in the table.

*Note `SHOW INDEX': show-index. returns the following fields:

   * `Table'

     The name of the table.

   * `Non_unique'

     0 if the index cannot contain duplicates, 1 if it can.

   * `Key_name'

     The name of the index. If the index is the primary key, the name
     is always `PRIMARY'.

   * `Seq_in_index'

     The column sequence number in the index, starting with 1.

   * `Column_name'

     The column name.

   * `Collation'

     How the column is sorted in the index. In MySQL, this can have
     values ``A'' (Ascending) or `NULL' (Not sorted).

   * `Cardinality'

     An estimate of the number of unique values in the index.  This is
     updated by running *Note `ANALYZE TABLE': analyze-table. or *Note
     `myisamchk -a': myisamchk.  `Cardinality' is counted based on
     statistics stored as integers, so the value is not necessarily
     exact even for small tables. The higher the cardinality, the
     greater the chance that MySQL uses the index when doing joins.

   * `Sub_part'

     The number of indexed characters if the column is only partly
     indexed, `NULL' if the entire column is indexed.

   * `Packed'

     Indicates how the key is packed. `NULL' if it is not.

   * `Null'

     Contains `YES' if the column may contain `NULL' values and `''' if
     not.

   * `Index_type'

     The index method used (`BTREE', `FULLTEXT', `HASH', `RTREE').

   * `Comment'

     Information about the index not described in its own column, such
     as `disabled' if the index is disabled.

   * `Index_comment'

     Any comment provided for the index with a `COMMENT' attribute when
     the index was created.

You can use DB_NAME.TBL_NAME as an alternative to the `TBL_NAME FROM
DB_NAME' syntax. These two statements are equivalent:

     SHOW INDEX FROM mytable FROM mydb;
     SHOW INDEX FROM mydb.mytable;

The `WHERE' clause can be given to select rows using more general
conditions, as discussed in *Note extended-show::.

You can also list a table's indexes with the *Note `mysqlshow -k
DB_NAME TBL_NAME': mysqlshow. command.


File: manual.info,  Node: show-master-status,  Next: show-open-tables,  Prev: show-index,  Up: show

13.7.5.24 `SHOW MASTER STATUS' Syntax
.....................................

     SHOW MASTER STATUS

This statement provides status information about the binary log files
of the master. It requires either the `SUPER' or `REPLICATION CLIENT'
privilege.

Example:

     mysql> SHOW MASTER STATUS;
     +---------------+----------+--------------+------------------+
     | File          | Position | Binlog_Do_DB | Binlog_Ignore_DB |
     +---------------+----------+--------------+------------------+
     | mysql-bin.003 | 73       | test         | manual,mysql     |
     +---------------+----------+--------------+------------------+


File: manual.info,  Node: show-open-tables,  Next: show-plugins,  Prev: show-master-status,  Up: show

13.7.5.25 `SHOW OPEN TABLES' Syntax
...................................

     SHOW OPEN TABLES [{FROM | IN} DB_NAME]
         [LIKE 'PATTERN' | WHERE EXPR]

*Note `SHOW OPEN TABLES': show-open-tables. lists the non-`TEMPORARY'
tables that are currently open in the table cache. See *Note
table-cache::. The `FROM' clause, if present, restricts the tables
shown to those present in the DB_NAME database. The `LIKE' clause, if
present, indicates which table names to match. The `WHERE' clause can
be given to select rows using more general conditions, as discussed in
*Note extended-show::.

*Note `SHOW OPEN TABLES': show-open-tables. output has the following
columns:

   * `Database'

     The database containing the table.

   * `Table'

     The table name.

   * `In_use'

     The number of table locks or lock requests there are for the
     table. For example, if one client acquires a lock for a table
     using `LOCK TABLE t1 WRITE', `In_use' will be 1. If another client
     issues `LOCK TABLE t1 WRITE' while the table remains locked, the
     client will block waiting for the lock, but the lock request
     causes `In_use' to be 2. If the count is zero, the table is open
     but not currently being used. `In_use' is also increased by the
     *Note `HANDLER ... OPEN': handler. statement and decreased by
     *Note `HANDLER ... CLOSE': handler.

   * `Name_locked'

     Whether the table name is locked. Name locking is used for
     operations such as dropping or renaming tables.

If you have no privileges for a table, it does not show up in the
output from *Note `SHOW OPEN TABLES': show-open-tables.


File: manual.info,  Node: show-plugins,  Next: show-privileges,  Prev: show-open-tables,  Up: show

13.7.5.26 `SHOW PLUGINS' Syntax
...............................

     SHOW PLUGINS

*Note `SHOW PLUGINS': show-plugins. displays information about server
plugins. Plugin information is also available in the
`INFORMATION_SCHEMA.PLUGINS' table. See *Note plugins-table::.

Example of *Note `SHOW PLUGINS': show-plugins. output:

     mysql> SHOW PLUGINS\G
     *************************** 1. row ***************************
        Name: binlog
      Status: ACTIVE
        Type: STORAGE ENGINE
     Library: NULL
     License: GPL
     *************************** 2. row ***************************
        Name: CSV
      Status: ACTIVE
        Type: STORAGE ENGINE
     Library: NULL
     License: GPL
     *************************** 3. row ***************************
        Name: MEMORY
      Status: ACTIVE
        Type: STORAGE ENGINE
     Library: NULL
     License: GPL
     *************************** 4. row ***************************
        Name: MyISAM
      Status: ACTIVE
        Type: STORAGE ENGINE
     Library: NULL
     License: GPL
     ...

*Note `SHOW PLUGINS': show-plugins. output has the following columns:

   * `Name': The name used to refer to the plugin in statements such as
     *Note `INSTALL PLUGIN': install-plugin. and *Note `UNINSTALL
     PLUGIN': uninstall-plugin.

   * `Status': The plugin status, one of `ACTIVE', `INACTIVE',
     `DISABLED', or `DELETED'.

   * `Type': The type of plugin, such as `STORAGE ENGINE',
     `INFORMATION_SCHEMA', or `AUTHENTICATION'.

   * `Library': The name of the plugin shared object file. This is the
     name used to refer to the plugin file in statements such as *Note
     `INSTALL PLUGIN': install-plugin. and *Note `UNINSTALL PLUGIN':
     uninstall-plugin. This file is located in the directory named by
     the `plugin_dir' system variable. If the library name is `NULL',
     the plugin is compiled in and cannot be uninstalled with *Note
     `UNINSTALL PLUGIN': uninstall-plugin.

   * `License': How the plugin is licensed; for example, `GPL'.

For plugins installed with *Note `INSTALL PLUGIN': install-plugin, the
`Name' and `Library' values are also registered in the `mysql.plugin'
table.

For information about plugin data structures that form the basis of the
information displayed by *Note `SHOW PLUGINS': show-plugins, see *Note
plugin-api::.


File: manual.info,  Node: show-privileges,  Next: show-procedure-code,  Prev: show-plugins,  Up: show

13.7.5.27 `SHOW PRIVILEGES' Syntax
..................................

     SHOW PRIVILEGES

*Note `SHOW PRIVILEGES': show-privileges. shows the list of system
privileges that the MySQL server supports. The exact list of privileges
depends on the version of your server.

     mysql> SHOW PRIVILEGES\G
     *************************** 1. row ***************************
     Privilege: Alter
       Context: Tables
       Comment: To alter the table
     *************************** 2. row ***************************
     Privilege: Alter routine
       Context: Functions,Procedures
       Comment: To alter or drop stored functions/procedures
     *************************** 3. row ***************************
     Privilege: Create
       Context: Databases,Tables,Indexes
       Comment: To create new databases and tables
     *************************** 4. row ***************************
     Privilege: Create routine
       Context: Databases
       Comment: To use CREATE FUNCTION/PROCEDURE
     *************************** 5. row ***************************
     Privilege: Create temporary tables
       Context: Databases
       Comment: To use CREATE TEMPORARY TABLE
     ...

Privileges belonging to a specific user are displayed by the *Note
`SHOW GRANTS': show-grants. statement. See *Note show-grants::, for
more information.


File: manual.info,  Node: show-procedure-code,  Next: show-procedure-status,  Prev: show-privileges,  Up: show

13.7.5.28 `SHOW PROCEDURE CODE' Syntax
......................................

     SHOW PROCEDURE CODE PROC_NAME

This statement is a MySQL extension that is available only for servers
that have been built with debugging support. It displays a
representation of the internal implementation of the named stored
procedure. A similar statement, *Note `SHOW FUNCTION CODE':
show-function-code, displays information about stored functions (see
*Note show-function-code::).

Both statements require that you be the owner of the routine or have
*Note `SELECT': select. access to the `mysql.proc' table.

If the named routine is available, each statement produces a result
set. Each row in the result set corresponds to one `instruction' in the
routine. The first column is `Pos', which is an ordinal number beginning
with 0. The second column is `Instruction', which contains an SQL
statement (usually changed from the original source), or a directive
which has meaning only to the stored-routine handler.

     mysql> DELIMITER //
     mysql> CREATE PROCEDURE p1 ()
         -> BEGIN
         ->   DECLARE fanta INT DEFAULT 55;
         ->   DROP TABLE t2;
         ->   LOOP
         ->     INSERT INTO t3 VALUES (fanta);
         ->     END LOOP;
         ->   END//
     Query OK, 0 rows affected (0.00 sec)

     mysql> SHOW PROCEDURE CODE p1//
     +-----+----------------------------------------+
     | Pos | Instruction                            |
     +-----+----------------------------------------+
     |   0 | set fanta@0 55                         |
     |   1 | stmt 9 "DROP TABLE t2"                 |
     |   2 | stmt 5 "INSERT INTO t3 VALUES (fanta)" |
     |   3 | jump 2                                 |
     +-----+----------------------------------------+
     4 rows in set (0.00 sec)

In this example, the nonexecutable `BEGIN' and `END' statements have
disappeared, and for the `DECLARE VARIABLE_NAME' statement, only the
executable part appears (the part where the default is assigned). For
each statement that is taken from source, there is a code word `stmt'
followed by a type (9 means `DROP', 5 means *Note `INSERT': insert, and
so on). The final row contains an instruction `jump 2', meaning `GOTO
instruction #2'.


File: manual.info,  Node: show-procedure-status,  Next: show-processlist,  Prev: show-procedure-code,  Up: show

13.7.5.29 `SHOW PROCEDURE STATUS' Syntax
........................................

     SHOW PROCEDURE STATUS
         [LIKE 'PATTERN' | WHERE EXPR]

This statement is a MySQL extension. It returns characteristics of a
stored procedure, such as the database, name, type, creator, creation
and modification dates, and character set information. A similar
statement, *Note `SHOW FUNCTION STATUS': show-function-status, displays
information about stored functions (see *Note show-function-status::).

The `LIKE' clause, if present, indicates which procedure or function
names to match. The `WHERE' clause can be given to select rows using
more general conditions, as discussed in *Note extended-show::.

     mysql> SHOW PROCEDURE STATUS LIKE 'sp1'\G
     *************************** 1. row ***************************
                       Db: test
                     Name: sp1
                     Type: PROCEDURE
                  Definer: testuser@localhost
                 Modified: 2004-08-03 15:29:37
                  Created: 2004-08-03 15:29:37
            Security_type: DEFINER
                  Comment:
     character_set_client: latin1
     collation_connection: latin1_swedish_ci
       Database Collation: latin1_swedish_ci

`character_set_client' is the session value of the
`character_set_client' system variable when the routine was created.
`collation_connection' is the session value of the
`collation_connection' system variable when the routine was created.
`Database Collation' is the collation of the database with which the
routine is associated.

You can also get information about stored routines from the *Note
`ROUTINES': routines-table. table in `INFORMATION_SCHEMA'. See *Note
routines-table::.


File: manual.info,  Node: show-processlist,  Next: show-profile,  Prev: show-procedure-status,  Up: show

13.7.5.30 `SHOW PROCESSLIST' Syntax
...................................

     SHOW [FULL] PROCESSLIST

*Note `SHOW PROCESSLIST': show-processlist. shows you which threads are
running. You can also get this information from the `INFORMATION_SCHEMA'
*Note `PROCESSLIST': processlist-table. table or the *Note `mysqladmin
processlist': mysqladmin. command. If you have the `PROCESS' privilege,
you can see all threads. Otherwise, you can see only your own threads
(that is, threads associated with the MySQL account that you are
using). If you do not use the `FULL' keyword, only the first 100
characters of each statement are shown in the `Info' field.

This statement is very useful if you get the `too many connections'
error message and want to find out what is going on. MySQL reserves one
extra connection to be used by accounts that have the `SUPER'
privilege, to ensure that administrators should always be able to
connect and check the system (assuming that you are not giving this
privilege to all your users).

Threads can be killed with the *Note `KILL': kill. statement. See *Note
kill::.

Here is an example of *Note `SHOW PROCESSLIST': show-processlist.
output:

     mysql> SHOW FULL PROCESSLIST\G
     *************************** 1. row ***************************
     Id: 1
     User: system user
     Host:
     db: NULL
     Command: Connect
     Time: 1030455
     State: Waiting for master to send event
     Info: NULL
     *************************** 2. row ***************************
     Id: 2
     User: system user
     Host:
     db: NULL
     Command: Connect
     Time: 1004
     State: Has read all relay log; waiting for the slave
            I/O thread to update it
     Info: NULL
     *************************** 3. row ***************************
     Id: 3112
     User: replikator
     Host: artemis:2204
     db: NULL
     Command: Binlog Dump
     Time: 2144
     State: Has sent all binlog to slave; waiting for binlog to be updated
     Info: NULL
     *************************** 4. row ***************************
     Id: 3113
     User: replikator
     Host: iconnect2:45781
     db: NULL
     Command: Binlog Dump
     Time: 2086
     State: Has sent all binlog to slave; waiting for binlog to be updated
     Info: NULL
     *************************** 5. row ***************************
     Id: 3123
     User: stefan
     Host: localhost
     db: apollon
     Command: Query
     Time: 0
     State: NULL
     Info: SHOW FULL PROCESSLIST
     5 rows in set (0.00 sec)

The columns produced by *Note `SHOW PROCESSLIST': show-processlist.
have the following meanings:

   * `Id'

     The connection identifier.

   * `User'

     The MySQL user who issued the statement. If this is `system user',
     it refers to a nonclient thread spawned by the server to handle
     tasks internally.  This could be the I/O or SQL thread used on
     replication slaves or a delayed-row handler. `unauthenticated
     user' refers to a thread that has become associated with a client
     connection but for which authentication of the client user has not
     yet been done.  `event_scheduler' refers to the thread that
     monitors scheduled events. For `system user', there is no host
     specified in the `Host' column.

   * `Host'

     The host name of the client issuing the statement (except for
     `system user' where there is no host).  *Note `SHOW PROCESSLIST':
     show-processlist. reports the host name for TCP/IP connections in
     `HOST_NAME:CLIENT_PORT' format to make it easier to determine
     which client is doing what.

   * `db'

     The default database, if one is selected, otherwise `NULL'.

   * `Command'

     The type of command the thread is executing. For descriptions for
     thread commands, see *Note thread-information::. The value of this
     column corresponds to the `COM_XXX' commands of the client/server
     protocol and `Com_XXX' status variables. See *Note
     server-status-variables::

   * `Time'

     The time in seconds that the thread has been in its current state.

   * `State'

     An action, event, or state that indicates what the thread is
     doing. Descriptions for `State' values can be found at *Note
     thread-information::.

     Most states correspond to very quick operations. If a thread stays
     in a given state for many seconds, there might be a problem that
     needs to be investigated.

     For the *Note `SHOW PROCESSLIST': show-processlist.  statement,
     the value of `State' is `NULL'.

   * `Info'

     The statement the thread is executing, or `NULL' if it is not
     executing any statement. The statement might be the one sent to the
     server, or an innermost statement if the statement executes other
     statements. For example, if a `CALL' statement executes a stored
     procedure that is executing a *Note `SELECT': select. statement,
     the `Info' value shows the *Note `SELECT': select. statement.


File: manual.info,  Node: show-profile,  Next: show-profiles,  Prev: show-processlist,  Up: show

13.7.5.31 `SHOW PROFILE' Syntax
...............................

     SHOW PROFILE [TYPE [, TYPE] ... ]
         [FOR QUERY N]
         [LIMIT ROW_COUNT [OFFSET OFFSET]]

     TYPE:
         ALL
       | BLOCK IO
       | CONTEXT SWITCHES
       | CPU
       | IPC
       | MEMORY
       | PAGE FAULTS
       | SOURCE
       | SWAPS

The *Note `SHOW PROFILE': show-profile. and *Note `SHOW PROFILES':
show-profiles. statements display profiling information that indicates
resource usage for statements executed during the course of the current
session.

Profiling is controlled by the `profiling' session variable, which has
a default value of 0 (`OFF').  Profiling is enabled by setting
`profiling' to 1 or `ON':

     mysql> SET profiling = 1;

*Note `SHOW PROFILES': show-profiles. displays a list of the most
recent statements sent to the server. The size of the list is
controlled by the `profiling_history_size' session variable, which has
a default value of 15. The maximum value is 100. Setting the value to 0
has the practical effect of disabling profiling.

All statements are profiled except *Note `SHOW PROFILE': show-profile.
and *Note `SHOW PROFILES': show-profiles, so you will find neither of
those statements in the profile list. Malformed statements are
profiled. For example, `SHOW PROFILING' is an illegal statement, and a
syntax error occurs if you try to execute it, but it will show up in
the profiling list.

*Note `SHOW PROFILE': show-profile. displays detailed information about
a single statement. Without the `FOR QUERY N' clause, the output
pertains to the most recently executed statement. If `FOR QUERY N' is
included, *Note `SHOW PROFILE': show-profile. displays information for
statement N. The values of N correspond to the `Query_ID' values
displayed by *Note `SHOW PROFILES': show-profiles.

The `LIMIT ROW_COUNT' clause may be given to limit the output to
ROW_COUNT rows. If `LIMIT' is given, `OFFSET OFFSET' may be added to
begin the output OFFSET rows into the full set of rows.

By default, *Note `SHOW PROFILE': show-profile. displays `Status' and
`Duration' columns. The `Status' values are like the `State' values
displayed by *Note `SHOW PROCESSLIST': show-processlist, although there
might be some minor differences in interpretion for the two statements
for some status values (see *Note thread-information::).

Optional TYPE values may be specified to display specific additional
types of information:

   * `ALL' displays all information

   * `BLOCK IO' displays counts for block input and output operations

   * `CONTEXT SWITCHES' displays counts for voluntary and involuntary
     context switches

   * `CPU' displays user and system CPU usage times

   * `IPC' displays counts for messages sent and received

   * `MEMORY' is not currently implemented

   * `PAGE FAULTS' displays counts for major and minor page faults

   * `SOURCE' displays the names of functions from the source code,
     together with the name and line number of the file in which the
     function occurs

   * `SWAPS' displays swap counts

Profiling is enabled per session. When a session ends, its profiling
information is lost.

     mysql> SELECT @@profiling;
     +-------------+
     | @@profiling |
     +-------------+
     |           0 |
     +-------------+
     1 row in set (0.00 sec)

     mysql> SET profiling = 1;
     Query OK, 0 rows affected (0.00 sec)

     mysql> DROP TABLE IF EXISTS t1;
     Query OK, 0 rows affected, 1 warning (0.00 sec)

     mysql> CREATE TABLE T1 (id INT);
     Query OK, 0 rows affected (0.01 sec)

     mysql> SHOW PROFILES;
     +----------+----------+--------------------------+
     | Query_ID | Duration | Query                    |
     +----------+----------+--------------------------+
     |        0 | 0.000088 | SET PROFILING = 1        |
     |        1 | 0.000136 | DROP TABLE IF EXISTS t1  |
     |        2 | 0.011947 | CREATE TABLE t1 (id INT) |
     +----------+----------+--------------------------+
     3 rows in set (0.00 sec)

     mysql> SHOW PROFILE;
     +----------------------+----------+
     | Status               | Duration |
     +----------------------+----------+
     | checking permissions | 0.000040 |
     | creating table       | 0.000056 |
     | After create         | 0.011363 |
     | query end            | 0.000375 |
     | freeing items        | 0.000089 |
     | logging slow query   | 0.000019 |
     | cleaning up          | 0.000005 |
     +----------------------+----------+
     7 rows in set (0.00 sec)

     mysql> SHOW PROFILE FOR QUERY 1;
     +--------------------+----------+
     | Status             | Duration |
     +--------------------+----------+
     | query end          | 0.000107 |
     | freeing items      | 0.000008 |
     | logging slow query | 0.000015 |
     | cleaning up        | 0.000006 |
     +--------------------+----------+
     4 rows in set (0.00 sec)

     mysql> SHOW PROFILE CPU FOR QUERY 2;
     +----------------------+----------+----------+------------+
     | Status               | Duration | CPU_user | CPU_system |
     +----------------------+----------+----------+------------+
     | checking permissions | 0.000040 | 0.000038 |   0.000002 |
     | creating table       | 0.000056 | 0.000028 |   0.000028 |
     | After create         | 0.011363 | 0.000217 |   0.001571 |
     | query end            | 0.000375 | 0.000013 |   0.000028 |
     | freeing items        | 0.000089 | 0.000010 |   0.000014 |
     | logging slow query   | 0.000019 | 0.000009 |   0.000010 |
     | cleaning up          | 0.000005 | 0.000003 |   0.000002 |
     +----------------------+----------+----------+------------+
     7 rows in set (0.00 sec)

*Note*:

Profiling is only partially functional on some architectures.  For
values that depend on the `getrusage()' system call, `NULL' is returned
on systems such as Windows that do not support the call. In addition,
profiling is per process and not per thread. This means that activity
on threads within the server other than your own may affect the timing
information that you see.

You can also get profiling information from the *Note `PROFILING':
profiling-table. table in `INFORMATION_SCHEMA'. See *Note
profiling-table::. For example, the following queries produce the same
result:

     SHOW PROFILE FOR QUERY 2;

     SELECT STATE, FORMAT(DURATION, 6) AS DURATION
     FROM INFORMATION_SCHEMA.PROFILING
     WHERE QUERY_ID = 2 ORDER BY SEQ;


File: manual.info,  Node: show-profiles,  Next: show-relaylog-events,  Prev: show-profile,  Up: show

13.7.5.32 `SHOW PROFILES' Syntax
................................

     SHOW PROFILES

The *Note `SHOW PROFILES': show-profiles. statement, together with
*Note `SHOW PROFILE': show-profile, displays profiling information that
indicates resource usage for statements executed during the course of
the current session.  For more information, see *Note show-profile::.


File: manual.info,  Node: show-relaylog-events,  Next: show-slave-hosts,  Prev: show-profiles,  Up: show

13.7.5.33 `SHOW RELAYLOG EVENTS' Syntax
.......................................

     SHOW RELAYLOG EVENTS
        [IN 'LOG_NAME'] [FROM POS] [LIMIT [OFFSET,] ROW_COUNT]

Shows the events in the relay log of a replication slave. If you do not
specify `'LOG_NAME'', the first relay log is displayed. This statement
has no effect on the master.

The `LIMIT' clause has the same syntax as for the *Note `SELECT':
select. statement. See *Note select::.

*Note*:

Issuing a *Note `SHOW RELAYLOG EVENTS': show-relaylog-events.  with no
`LIMIT' clause could start a very time- and resource-consuming process
because the server returns to the client the complete contents of the
relay log (including all statements modifying data that have been
received by the slave).

*Note*:

Some events relating to the setting of user and system variables are
not included in the output from *Note `SHOW RELAYLOG EVENTS':
show-relaylog-events. To get complete coverage of events within a relay
log, use *Note `mysqlbinlog': mysqlbinlog.


File: manual.info,  Node: show-slave-hosts,  Next: show-slave-status,  Prev: show-relaylog-events,  Up: show

13.7.5.34 `SHOW SLAVE HOSTS' Syntax
...................................

     SHOW SLAVE HOSTS

Displays a list of replication slaves currently registered with the
master. (Before MySQL 5.5.3, only slaves started with the
`--report-host=HOST_NAME' option are visible in this list.)

The list is displayed on any server (not just the master server). The
output looks like this:

     mysql> SHOW SLAVE HOSTS;
     +------------+-----------+------+-----------+
     | Server_id  | Host      | Port | Master_id |
     +------------+-----------+------+-----------+
     |  192168010 | iconnect2 | 3306 | 192168011 |
     | 1921680101 | athena    | 3306 | 192168011 |
     +------------+-----------+------+-----------+

   * `Server_id': The unique server ID of the slave server, as
     configured in the server's option file, or on the command line with
     `--server-id=VALUE'.

   * `Host': The host name of the slave server, as configured in the
     server's option file, or on the command line with
     `--report-host=HOST_NAME'.  Note that this can differ from the
     machine name as configured in the operating system.

   * `Port': The port the slave server is listening on.

     In MySQL 5.5.23 and later, a zero in this column means that the
     slave port (`--report-port') was not set.  Prior to MySQL 5.5.23,
     3306 was used as the default in such cases (Bug #13333431).

   * `Master_id': The unique server ID of the master server that the
     slave server is replicating from.

Some MySQL versions report another variable, `Rpl_recovery_rank'. This
variable was never used, and was removed in MySQL 5.5.3. (Bug #13963)


File: manual.info,  Node: show-slave-status,  Next: show-status,  Prev: show-slave-hosts,  Up: show

13.7.5.35 `SHOW SLAVE STATUS' Syntax
....................................

     SHOW SLAVE STATUS

This statement provides status information on essential parameters of
the slave threads. It requires either the `SUPER' or `REPLICATION
CLIENT' privilege.

If you issue this statement using the *Note `mysql': mysql.  client,
you can use a `\G' statement terminator rather than a semicolon to
obtain a more readable vertical layout:

     mysql> SHOW SLAVE STATUS\G
     *************************** 1. row ***************************
                    Slave_IO_State: Waiting for master to send event
                       Master_Host: localhost
                       Master_User: root
                       Master_Port: 3306
                     Connect_Retry: 3
                   Master_Log_File: gbichot-bin.005
               Read_Master_Log_Pos: 79
                    Relay_Log_File: gbichot-relay-bin.005
                     Relay_Log_Pos: 548
             Relay_Master_Log_File: gbichot-bin.005
                  Slave_IO_Running: Yes
                 Slave_SQL_Running: Yes
                   Replicate_Do_DB:
               Replicate_Ignore_DB:
                Replicate_Do_Table:
            Replicate_Ignore_Table:
           Replicate_Wild_Do_Table:
       Replicate_Wild_Ignore_Table:
                        Last_Errno: 0
                        Last_Error:
                      Skip_Counter: 0
               Exec_Master_Log_Pos: 79
                   Relay_Log_Space: 552
                   Until_Condition: None
                    Until_Log_File:
                     Until_Log_Pos: 0
                Master_SSL_Allowed: No
                Master_SSL_CA_File:
                Master_SSL_CA_Path:
                   Master_SSL_Cert:
                 Master_SSL_Cipher:
                    Master_SSL_Key:
             Seconds_Behind_Master: 8
     Master_SSL_Verify_Server_Cert: No
                     Last_IO_Errno: 0
                     Last_IO_Error:
                    Last_SQL_Errno: 0
                    Last_SQL_Error:
       Replicate_Ignore_Server_Ids: 0
                  Master_Server_Id: 1

The following list describes the fields returned by *Note `SHOW SLAVE
STATUS': show-slave-status. For additional information about
interpreting their meanings, see *Note slave-io-thread-states::.

   * `Slave_IO_State'

     A copy of the `State' field of the *Note `SHOW PROCESSLIST':
     show-processlist. output for the slave I/O thread. This tells you
     what the thread is doing: trying to connect to the master, waiting
     for events from the master, reconnecting to the master, and so on.
     For a listing of possible states, see *Note
     slave-io-thread-states::.

   * `Master_Host'

     The master host that the slave is connected to.

   * `Master_User'

     The user name of the account used to connect to the master.

   * `Master_Port'

     The port used to connect to the master.

   * `Connect_Retry'

     The number of seconds between connect retries (default 60).  This
     can be set with the *Note `CHANGE MASTER TO': change-master-to.
     statement.

   * `Master_Log_File'

     The name of the master binary log file from which the I/O thread
     is currently reading.

   * `Read_Master_Log_Pos'

     The position in the current master binary log file up to which the
     I/O thread has read.

   * `Relay_Log_File'

     The name of the relay log file from which the SQL thread is
     currently reading and executing.

   * `Relay_Log_Pos'

     The position in the current relay log file up to which the SQL
     thread has read and executed.

   * `Relay_Master_Log_File'

     The name of the master binary log file containing the most recent
     event executed by the SQL thread.

   * `Slave_IO_Running'

     Whether the I/O thread is started and has connected successfully
     to the master. Internally, the state of this thread is represented
     by one of the following three values:

        * `MYSQL_SLAVE_NOT_RUN'

          The slave I/O thread is not running. For this state,
          `Slave_IO_Running' is `No'.

        * `MYSQL_SLAVE_RUN_NOT_CONNECT'

          The slave I/O thread is running, but is not connected to a
          replication master. For this state, `Slave_IO_Running'
          depends on the server version as shown in the following table.

          For the `MYSQL_SLAVE_RUN_NOT_CONNECT' state,
          `Slave_IO_Running' depends on the MySQL server version. This
          table shows MySQL version dependency for `Slave_IO_Running'.

          MySQL Version                   `Slave_IO_Running'
          4.1 (4.1.13 and earlier); 5.0   `Yes'
          (5.0.11 and earlier)            
          4.1 (4.1.14 and later); 5.0     `No'
          (5.0.12 and later)              
          5.1 (5.1.45 and earlier)        `No'
          5.1 (5.1.46 and later); 5.5     `Connecting'

        * `MYSQL_SLAVE_RUN_CONNECT'

          The slave I/O thread is running, and is connected to a
          replication master. For this state, `Slave_IO_Running' is
          `Yes'.

     The value of the `Slave_running' system status variable
     corresponds with this value.

   * `Slave_SQL_Running'

     Whether the SQL thread is started.

   * `Replicate_Do_DB', `Replicate_Ignore_DB'

     The lists of databases that were specified with the
     `--replicate-do-db' and `--replicate-ignore-db' options, if any.

   * `Replicate_Do_Table', `Replicate_Ignore_Table',
     `Replicate_Wild_Do_Table', `Replicate_Wild_Ignore_Table'

     The lists of tables that were specified with the
     `--replicate-do-table', `--replicate-ignore-table',
     `--replicate-wild-do-table', and `--replicate-wild-ignore-table'
     options, if any.

   * `Last_Errno', `Last_Error'

     These columns are aliases for `Last_SQL_Errno' and
     `Last_SQL_Error'.

     Issuing *Note `RESET MASTER': reset-master. or *Note `RESET
     SLAVE': reset-slave. resets the values shown in these columns.

     *Note*:

     When the slave SQL thread receives an error, it reports the error
     first, then stops the SQL thread. This means that there is a small
     window of time during which *Note `SHOW SLAVE STATUS':
     show-slave-status. shows a nonzero value for `Last_SQL_Errno' even
     though `Slave_SQL_Running' still displays `Yes'.

   * `Skip_Counter'

     The current value of the `sql_slave_skip_counter' system variable.
     See *Note set-global-sql-slave-skip-counter::.

   * `Exec_Master_Log_Pos'

     The position in the current master binary log file to which the
     SQL thread has read and executed, marking the start of the next
     transaction or event to be processed. You can use this value with
     the *Note `CHANGE MASTER TO': change-master-to. statement's
     `MASTER_LOG_POS' option when starting a new slave from an existing
     slave, so that the new slave reads from this point. The
     coordinates given by (`Relay_Master_Log_File',
     `Exec_Master_Log_Pos') in the master's binary log correspond to
     the coordinates given by (`Relay_Log_File', `Relay_Log_Pos') in
     the relay log.

   * `Relay_Log_Space'

     The total combined size of all existing relay log files.

   * `Until_Condition', `Until_Log_File', `Until_Log_Pos'

     The values specified in the `UNTIL' clause of the *Note `START
     SLAVE': start-slave. statement.

     `Until_Condition' has these values:

        * `None' if no `UNTIL' clause was specified

        * `Master' if the slave is reading until a given position in
          the master's binary log

        * `Relay' if the slave is reading until a given position in its
          relay log

     `Until_Log_File' and `Until_Log_Pos' indicate the log file name
     and position that define the coordinates at which the SQL thread
     stops executing.

   * `Master_SSL_Allowed', `Master_SSL_CA_File', `Master_SSL_CA_Path',
     `Master_SSL_Cert', `Master_SSL_Cipher', `Master_SSL_Key',
     `Master_SSL_Verify_Server_Cert'

     These fields show the SSL parameters used by the slave to connect
     to the master, if any.

     `Master_SSL_Allowed' has these values:

        * `Yes' if an SSL connection to the master is permitted

        * `No' if an SSL connection to the master is not permitted

        * `Ignored' if an SSL connection is permitted but the slave
          server does not have SSL support enabled

     The values of the other SSL-related fields correspond to the
     values of the `MASTER_SSL_CA', `MASTER_SSL_CAPATH',
     `MASTER_SSL_CERT', `MASTER_SSL_CIPHER', `MASTER_SSL_KEY', and
     `MASTER_SSL_VERIFY_SERVER_CERT' options to the *Note `CHANGE
     MASTER TO': change-master-to.  statement. See *Note
     change-master-to::.

   * `Seconds_Behind_Master'

     This field is an indication of how `late' the slave is:

        * When the slave is actively processing updates, this field
          shows the difference between the current timestamp on the
          slave and the original timestamp logged on the master for the
          most event currently being processed on the slave.

        * When no event is currently being processed on the slave, this
          value is 0.

     In essence, this field measures the time difference in seconds
     between the slave SQL thread and the slave I/O thread. If the
     network connection between master and slave is fast, the slave I/O
     thread is very close to the master, so this field is a good
     approximation of how late the slave SQL thread is compared to the
     master. If the network is slow, this is _not_ a good approximation;
     the slave SQL thread may quite often be caught up with the
     slow-reading slave I/O thread, so `Seconds_Behind_Master' often
     shows a value of 0, even if the I/O thread is late compared to the
     master.  In other words, _this column is useful only for fast
     networks_.

     This time difference computation works even if the master and
     slave do not have identical clock times, provided that the
     difference, computed when the slave I/O thread starts, remains
     constant from then on. Any changes--including NTP updates--can
     lead to clock skews that can make calculation of
     `Seconds_Behind_Master' less reliable.

     This field is `NULL' (undefined or unknown) if the slave SQL
     thread is not running, or if the slave I/O thread is not running
     or is not connected to the master. For example, if the slave I/O
     thread is running but is not connected to the master and is
     sleeping for the number of seconds given by the *Note `CHANGE
     MASTER TO': change-master-to. statement or
     `--master-connect-retry' option (default 60) before reconnecting,
     the value is `NULL'. This is because the slave cannot know what
     the master is doing, and so cannot say reliably how late it is.

     The value of `Seconds_Behind_Master' is based on the timestamps
     stored in events, which are preserved through replication. This
     means that if a master M1 is itself a slave of M0, any event from
     M1's binary log that originates from M0's binary log has M0's
     timestamp for that event. This enables MySQL to replicate *Note
     `TIMESTAMP': datetime. successfully.  However, the problem for
     `Seconds_Behind_Master' is that if M1 also receives direct updates
     from clients, the `Seconds_Behind_Master' value randomly
     fluctuates because sometimes the last event from M1 originates
     from M0 and sometimes is the result of a direct update on M1.

   * `Last_IO_Errno', `Last_IO_Error'

     The error number and error message of the most recent error that
     caused the I/O thread to stop. An error number of 0 and message of
     the empty string mean `no error.' If the `Last_IO_Error' value is
     not empty, the error values also appear in the slave's error log.

     Prior to MySQL 5.5, `Last_IO_Error' and `Last_IO_Errno' were not
     set in the event that replication failed due to exceeding
     `max_allowed_packet' (Bug #42914).

     Issuing *Note `RESET MASTER': reset-master. or *Note `RESET
     SLAVE': reset-slave. resets the values shown in these columns.

   * `Last_SQL_Errno', `Last_SQL_Error'

     The error number and error message of the most recent error that
     caused the SQL thread to stop. An error number of 0 and message of
     the empty string mean `no error.' If the `Last_SQL_Error' value is
     not empty, the error values also appear in the slave's error log.

     Example:

          Last_SQL_Errno: 1051
          Last_SQL_Error: error 'Unknown table 'z'' on query 'drop table z'

     The message indicates that the table `z' existed on the master and
     was dropped there, but it did not exist on the slave, so *Note
     `DROP TABLE': drop-table. failed on the slave. (This might occur,
     for example, if you forget to copy the table to the slave when
     setting up replication.)

     Issuing *Note `RESET MASTER': reset-master. or *Note `RESET
     SLAVE': reset-slave. resets the values shown in these columns.

   * `Replicate_Ignore_Server_Ids'

     Beginning with MySQL 5.5, you can tell a slave to ignore events
     from 0 or more masters using the `IGNORE_SERVER_IDS' option of the
     *Note `CHANGE MASTER TO': change-master-to. statement.  This is
     normally of interest only when using a circular or other
     multi-master replication setup.

     The message shown for `Replicate_Ignore_Server_Ids' consists of a
     space-delimited list of one or more numbers, the first value
     indicating the number of servers to be ignored; if not 0 (the
     default), this server-count value is followed by the actual server
     IDs. For example, if a *Note `CHANGE MASTER TO': change-master-to.
     statement containing the `IGNORE_SERVER_IDS = (2,6,9)' option has
     been issued to tell a slave to ignore masters having the server ID
     2, 6, or 9, that information appears as shown here:

            Replicate_Ignore_Server_Ids: 3 2 6 9

   * `Master_Server_Id'

     The `server_id' value from the master.


File: manual.info,  Node: show-status,  Next: show-table-status,  Prev: show-slave-status,  Up: show

13.7.5.36 `SHOW STATUS' Syntax
..............................

     SHOW [GLOBAL | SESSION] STATUS
         [LIKE 'PATTERN' | WHERE EXPR]

*Note `SHOW STATUS': show-status. provides server status information.
This information also can be obtained using the *Note `mysqladmin
extended-status': mysqladmin. command. The `LIKE' clause, if present,
indicates which variable names to match. The `WHERE' clause can be
given to select rows using more general conditions, as discussed in
*Note extended-show::.  This statement does not require any privilege.
It requires only the ability to connect to the server.

Partial output is shown here. The list of names and values may be
different for your server. The meaning of each variable is given in
*Note server-status-variables::.

     mysql> SHOW STATUS;
     +--------------------------+------------+
     | Variable_name            | Value      |
     +--------------------------+------------+
     | Aborted_clients          | 0          |
     | Aborted_connects         | 0          |
     | Bytes_received           | 155372598  |
     | Bytes_sent               | 1176560426 |
     | Connections              | 30023      |
     | Created_tmp_disk_tables  | 0          |
     | Created_tmp_tables       | 8340       |
     | Created_tmp_files        | 60         |
     ...
     | Open_tables              | 1          |
     | Open_files               | 2          |
     | Open_streams             | 0          |
     | Opened_tables            | 44600      |
     | Questions                | 2026873    |
     ...
     | Table_locks_immediate    | 1920382    |
     | Table_locks_waited       | 0          |
     | Threads_cached           | 0          |
     | Threads_created          | 30022      |
     | Threads_connected        | 1          |
     | Threads_running          | 1          |
     | Uptime                   | 80380      |
     +--------------------------+------------+

With a `LIKE' clause, the statement displays only rows for those
variables with names that match the pattern:

     mysql> SHOW STATUS LIKE 'Key%';
     +--------------------+----------+
     | Variable_name      | Value    |
     +--------------------+----------+
     | Key_blocks_used    | 14955    |
     | Key_read_requests  | 96854827 |
     | Key_reads          | 162040   |
     | Key_write_requests | 7589728  |
     | Key_writes         | 3813196  |
     +--------------------+----------+

With the `GLOBAL' modifier, *Note `SHOW STATUS': show-status. displays
the status values for all connections to MySQL. With `SESSION', it
displays the status values for the current connection. If no modifier
is present, the default is `SESSION'. `LOCAL' is a synonym for
`SESSION'.

Some status variables have only a global value. For these, you get the
same value for both `GLOBAL' and `SESSION'. The scope for each status
variable is listed at *Note server-status-variables::.

Each invocation of the *Note `SHOW STATUS': show-status. statement uses
an internal temporary table and increments the global
`Created_tmp_tables' value.


File: manual.info,  Node: show-table-status,  Next: show-tables,  Prev: show-status,  Up: show

13.7.5.37 `SHOW TABLE STATUS' Syntax
....................................

     SHOW TABLE STATUS [{FROM | IN} DB_NAME]
         [LIKE 'PATTERN' | WHERE EXPR]

*Note `SHOW TABLE STATUS': show-table-status. works likes *Note `SHOW
TABLES': show-tables, but provides a lot of information about each
non-`TEMPORARY' table. You can also get this list using the *Note
`mysqlshow --status DB_NAME': mysqlshow. command.  The `LIKE' clause,
if present, indicates which table names to match. The `WHERE' clause
can be given to select rows using more general conditions, as discussed
in *Note extended-show::.

This statement also displays information about views.

*Note `SHOW TABLE STATUS': show-table-status. output has the following
columns:

   * `Name'

     The name of the table.

   * `Engine'

     The storage engine for the table. See *Note storage-engines::.

   * `Version'

     The version number of the table's `.frm' file.

   * `Row_format'

     The row-storage format (`Fixed', `Dynamic', `Compressed',
     `Redundant', `Compact').  For `MyISAM' tables, (`Dynamic'
     corresponds to what *Note `myisamchk -dvv': myisamchk. reports as
     `Packed'. The format of `InnoDB' tables is reported as `Redundant'
     or `Compact'.  For the `Barracuda' file format of the `InnoDB
     Plugin', the format may be `Compressed' or `Dynamic'.

   * `Rows'

     The number of rows. Some storage engines, such as `MyISAM', store
     the exact count. For other storage engines, such as `InnoDB', this
     value is an approximation, and may vary from the actual value by
     as much as 40 to 50%. In such cases, use `SELECT COUNT(*)' to
     obtain an accurate count.

     The `Rows' value is `NULL' for tables in the `INFORMATION_SCHEMA'
     database.

   * `Avg_row_length'

     The average row length.

   * `Data_length'

     The length of the data file.

   * `Max_data_length'

     The maximum length of the data file. This is the total number of
     bytes of data that can be stored in the table, given the data
     pointer size used.

   * `Index_length'

     The length of the index file.

   * `Data_free'

     The number of allocated but unused bytes.

     This information is also shown for `InnoDB' tables (previously, it
     was in the `Comment' value). `InnoDB' tables report the free space
     of the tablespace to which the table belongs. For a table located
     in the shared tablespace, this is the free space of the shared
     tablespace. If you are using multiple tablespaces and the table
     has its own tablespace, the free space is for only that table.
     Free space means the number of completely free 1MB extents minus a
     safety margin. Even if free space displays as 0, it may be
     possible to insert rows as long as new extents need not be
     allocated.

     For partitioned tables, this value is only an estimate and may not
     be absolutely correct. A more accurate method of obtaining this
     information in such cases is to query the
     `INFORMATION_SCHEMA.PARTITIONS' table, as shown in this example:

          SELECT    SUM(DATA_FREE)
              FROM  INFORMATION_SCHEMA.PARTITIONS
              WHERE TABLE_SCHEMA = 'mydb'
              AND   TABLE_NAME   = 'mytable';

     For more information, see *Note partitions-table::.

   * `Auto_increment'

     The next `AUTO_INCREMENT' value.

   * `Create_time'

     When the table was created.

   * `Update_time'

     When the data file was last updated. For some storage engines,
     this value is `NULL'. For example, `InnoDB' stores multiple tables
     in its system tablespace and the data file timestamp does not
     apply. Even with file-per-table mode with each `InnoDB' table in a
     separate `.ibd' file, change buffering can delay the write to the
     data file, so the file modification time is different from the
     time of the last insert, update, or delete. For `MyISAM', the data
     file timestamp is used; however, on Windows the timestamp is not
     updated by updates so the value is inaccurate.

   * `Check_time'

     When the table was last checked. Not all storage engines update
     this time, in which case the value is always `NULL'.

   * `Collation'

     The table's character set and collation.

   * `Checksum'

     The live checksum value (if any).

   * `Create_options'

     Extra options used with *Note `CREATE TABLE': create-table. The
     original options supplied when *Note `CREATE TABLE': create-table.
     is called are retained and the options reported here may differ
     from the active table settings and options.

   * `Comment'

     The comment used when creating the table (or information as to why
     MySQL could not access the table information).

For `MEMORY' tables, the `Data_length', `Max_data_length', and
`Index_length' values approximate the actual amount of allocated
memory. The allocation algorithm reserves memory in large amounts to
reduce the number of allocation operations.

For *Note `NDBCLUSTER': mysql-cluster. tables, the output of this
statement shows appropriate values for the `Avg_row_length' and
`Data_length' columns, with the exception that *Note `BLOB': blob.
columns are not taken into account

For views, all the fields displayed by *Note `SHOW TABLE STATUS':
show-table-status. are `NULL' except that `Name' indicates the view
name and `Comment' says `view'.


File: manual.info,  Node: show-tables,  Next: show-triggers,  Prev: show-table-status,  Up: show

13.7.5.38 `SHOW TABLES' Syntax
..............................

     SHOW [FULL] TABLES [{FROM | IN} DB_NAME]
         [LIKE 'PATTERN' | WHERE EXPR]

*Note `SHOW TABLES': show-tables. lists the non-`TEMPORARY' tables in a
given database. You can also get this list using the *Note `mysqlshow
DB_NAME': mysqlshow. command. The `LIKE' clause, if present, indicates
which table names to match. The `WHERE' clause can be given to select
rows using more general conditions, as discussed in *Note
extended-show::.

Matching performed by the `LIKE' clause is dependent on the setting of
the `lower_case_table_names' system variable.

This statement also lists any views in the database. The `FULL'
modifier is supported such that *Note `SHOW FULL TABLES': show-tables.
displays a second output column. Values for the second column are `BASE
TABLE' for a table and `VIEW' for a view.

If you have no privileges for a base table or view, it does not show up
in the output from *Note `SHOW TABLES': show-tables. or *Note
`mysqlshow db_name': mysqlshow.


File: manual.info,  Node: show-triggers,  Next: show-variables,  Prev: show-tables,  Up: show

13.7.5.39 `SHOW TRIGGERS' Syntax
................................

     SHOW TRIGGERS [{FROM | IN} DB_NAME]
         [LIKE 'PATTERN' | WHERE EXPR]

*Note `SHOW TRIGGERS': show-triggers. lists the triggers currently
defined for tables in a database (the default database unless a `FROM'
clause is given). This statement returns results only for databases and
tables for which you have the `TRIGGER' privilege. The `LIKE' clause, if
present, indicates which table names to match (not trigger names) and
causes the statement to display triggers for those tables. The `WHERE'
clause can be given to select rows using more general conditions, as
discussed in *Note extended-show::.

For the trigger `ins_sum' as defined in *Note triggers::, the output of
this statement is as shown here:

     mysql> SHOW TRIGGERS LIKE 'acc%'\G
     *************************** 1. row ***************************
                  Trigger: ins_sum
                    Event: INSERT
                    Table: account
                Statement: SET @sum = @sum + NEW.amount
                   Timing: BEFORE
                  Created: NULL
                 sql_mode:
                  Definer: myname@localhost
     character_set_client: latin1
     collation_connection: latin1_swedish_ci
       Database Collation: latin1_swedish_ci

*Note `SHOW TRIGGERS': show-triggers. output has the following columns:

   * `Trigger': The trigger name.

   * `Event': The type of operation that causes trigger activation. The
     value is `'INSERT'', `'UPDATE'', or `'DELETE''.

   * `Table': The table for which the trigger is defined.

   * `Statement': The trigger body; that is, the statement executed
     when the trigger activates.

   * `Timing': Whether the trigger activates before or after the
     triggering event. The value is `'BEFORE'' or `'AFTER''.

   * `Created': Currently, the value of this column is always `NULL'.

   * `sql_mode': The SQL mode in effect when the trigger executes.

   * `Definer': The account of the user who created the trigger, in
     `'USER_NAME'@'HOST_NAME'' format.

   * `character_set_client': The session value of the
     `character_set_client' system variable when the trigger was
     created.

   * `collation_connection': The session value of the
     `collation_connection' system variable when the trigger was
     created.

   * `Database Collation': The collation of the database with which the
     trigger is associated.

You can also obtain information about trigger objects from
`INFORMATION_SCHEMA', which contains a *Note `TRIGGERS':
triggers-table. table. See *Note triggers-table::.


File: manual.info,  Node: show-variables,  Next: show-warnings,  Prev: show-triggers,  Up: show

13.7.5.40 `SHOW VARIABLES' Syntax
.................................

     SHOW [GLOBAL | SESSION] VARIABLES
         [LIKE 'PATTERN' | WHERE EXPR]

*Note `SHOW VARIABLES': show-variables. shows the values of MySQL
system variables. This information also can be obtained using the *Note
`mysqladmin variables': mysqladmin. command. The `LIKE' clause, if
present, indicates which variable names to match. The `WHERE' clause
can be given to select rows using more general conditions, as discussed
in *Note extended-show::.  This statement does not require any
privilege. It requires only the ability to connect to the server.

With the `GLOBAL' modifier, *Note `SHOW VARIABLES': show-variables.
displays the values that are used for new connections to MySQL. As of
MySQL 5.5.3, if a variable has no global value, no value is displayed.
Before 5.5.3, the session value is displayed. With `SESSION', *Note
`SHOW VARIABLES': show-variables. displays the values that are in
effect for the current connection. If no modifier is present, the
default is `SESSION'. `LOCAL' is a synonym for `SESSION'.

*Note `SHOW VARIABLES': show-variables. is subject to a
version-dependent display-width limit. For variables with very long
values that are not completely displayed, use *Note `SELECT': select.
as a workaround. For example:

     SELECT @@GLOBAL.innodb_data_file_path;

If the default system variable values are unsuitable, you can set them
using command options when *Note `mysqld': mysqld.  starts, and most
can be changed at runtime with the *Note `SET': set-statement.
statement. See *Note using-system-variables::, and *Note
set-statement::.

Partial output is shown here. The list of names and values may be
different for your server.  *Note server-system-variables::, describes
the meaning of each variable, and *Note server-parameters::, provides
information about tuning them.

     mysql> SHOW VARIABLES;
     +-----------------------------------------+---------------------------+
     | Variable_name                           | Value                     |
     +-----------------------------------------+---------------------------+
     | auto_increment_increment                | 1                         |
     | auto_increment_offset                   | 1                         |
     | autocommit                              | ON                        |
     | automatic_sp_privileges                 | ON                        |
     | back_log                                | 50                        |
     | basedir                                 | /home/jon/bin/mysql-5.5   |
     | big_tables                              | OFF                       |
     | binlog_cache_size                       | 32768                     |
     | binlog_direct_non_transactional_updates | OFF                       |
     | binlog_format                           | STATEMENT                 |
     | binlog_stmt_cache_size                  | 32768                     |
     | bulk_insert_buffer_size                 | 8388608                   |
     ...
     | max_allowed_packet                      | 1048576                   |
     | max_binlog_cache_size                   | 18446744073709547520      |
     | max_binlog_size                         | 1073741824                |
     | max_binlog_stmt_cache_size              | 18446744073709547520      |
     | max_connect_errors                      | 10                        |
     | max_connections                         | 151                       |
     | max_delayed_threads                     | 20                        |
     | max_error_count                         | 64                        |
     | max_heap_table_size                     | 16777216                  |
     | max_insert_delayed_threads              | 20                        |
     | max_join_size                           | 18446744073709551615      |
     ...

     | thread_handling                         | one-thread-per-connection |
     | thread_stack                            | 262144                    |
     | time_format                             | %H:%i:%s                  |
     | time_zone                               | SYSTEM                    |
     | timed_mutexes                           | OFF                       |
     | timestamp                               | 1316689732                |
     | tmp_table_size                          | 16777216                  |
     | tmpdir                                  | /tmp                      |
     | transaction_alloc_block_size            | 8192                      |
     | transaction_prealloc_size               | 4096                      |
     | tx_isolation                            | REPEATABLE-READ           |
     | unique_checks                           | ON                        |
     | updatable_views_with_limit              | YES                       |
     | version                                 | 5.5.17-log                |
     | version_comment                         | Source distribution       |
     | version_compile_machine                 | x86_64                    |
     | version_compile_os                      | Linux                     |
     | wait_timeout                            | 28800                     |
     | warning_count                           | 0                         |
     +-----------------------------------------+---------------------------+

With a `LIKE' clause, the statement displays only rows for those
variables with names that match the pattern. To obtain the row for a
specific variable, use a `LIKE' clause as shown:

     SHOW VARIABLES LIKE 'max_join_size';
     SHOW SESSION VARIABLES LIKE 'max_join_size';

To get a list of variables whose name match a pattern, use the ``%''
wildcard character in a `LIKE' clause:

     SHOW VARIABLES LIKE '%size%';
     SHOW GLOBAL VARIABLES LIKE '%size%';

Wildcard characters can be used in any position within the pattern to
be matched. Strictly speaking, because ``_'' is a wildcard that matches
any single character, you should escape it as ``\_'' to match it
literally. In practice, this is rarely necessary.


File: manual.info,  Node: show-warnings,  Prev: show-variables,  Up: show

13.7.5.41 `SHOW WARNINGS' Syntax
................................

     SHOW WARNINGS [LIMIT [OFFSET,] ROW_COUNT]
     SHOW COUNT(*) WARNINGS

*Note `SHOW WARNINGS': show-warnings. is a diagnostic statement that
displays information about the conditions (errors, warnings, and notes)
resulting from executing a statement in the current session. Warnings
are generated for DML statements such as *Note `INSERT': insert, *Note
`UPDATE': update, and *Note `LOAD DATA INFILE': load-data. as well as
DDL statements such as *Note `CREATE TABLE': create-table. and *Note
`ALTER TABLE': alter-table.

The `LIMIT' clause has the same syntax as for the *Note `SELECT':
select. statement. See *Note select::.

*Note `SHOW WARNINGS': show-warnings. is also used following *Note
`EXPLAIN EXTENDED': explain-extended, to display the extra information
generated by *Note `EXPLAIN': explain. when the `EXTENDED' keyword is
used. See *Note explain-extended::.

*Note `SHOW WARNINGS': show-warnings. displays information about the
conditions resulting from the most recent statement in the current
session that generated messages. It shows nothing if the most recent
statement used a table and generated no messages. (That is, statements
that use a table but generate no messages clear the message list.)
Statements that do not use tables and do not generate messages have no
effect on the message list.

The *Note `SHOW COUNT(*) WARNINGS': show-warnings. diagnostic statement
displays the total number of errors, warnings, and notes. You can also
retrieve this number from the `warning_count' system variable:

     SHOW COUNT(*) WARNINGS;
     SELECT @@warning_count;

A related diagnostic statement, *Note `SHOW ERRORS': show-errors, shows
only error conditions (it excludes warnings and notes), and *Note `SHOW
COUNT(*) ERRORS': show-warnings. statement displays the total number of
errors.  See *Note show-errors::.

Here is a simple example that shows data-conversion warnings for *Note
`INSERT': insert.:

     mysql> CREATE TABLE t1 (a TINYINT NOT NULL, b CHAR(4));
     Query OK, 0 rows affected (0.05 sec)

     mysql> INSERT INTO t1 VALUES(10,'mysql'), (NULL,'test'), (300,'xyz');
     Query OK, 3 rows affected, 3 warnings (0.00 sec)
     Records: 3  Duplicates: 0  Warnings: 3

     mysql> SHOW WARNINGS\G
     *************************** 1. row ***************************
       Level: Warning
        Code: 1265
     Message: Data truncated for column 'b' at row 1
     *************************** 2. row ***************************
       Level: Warning
        Code: 1048
     Message: Column 'a' cannot be null
     *************************** 3. row ***************************
       Level: Warning
        Code: 1264
     Message: Out of range value for column 'a' at row 3
     3 rows in set (0.00 sec)

The `max_error_count' system variable controls the maximum number of
error, warning, and note messages for which the server stores
information, and thus the number of messages that *Note `SHOW
WARNINGS': show-warnings. displays. To change the number of messages
the server can store, change the value of `max_error_count'. The
default is 64.

`max_error_count' controls only how many messages are stored, not how
many are counted. The value of `warning_count' is not limited by
`max_error_count', even if the number of messages generated exceeds
`max_error_count'. The following example demonstrates this. The *Note
`ALTER TABLE': alter-table. statement produces three warning messages
(strict SQL mode is disabled for the example to prevent an error from
occuring after a single conversion issue). Only one message is stored
and displayed because `max_error_count' has been set to 1, but all
three are counted (as shown by the value of `warning_count'):

     mysql> SHOW VARIABLES LIKE 'max_error_count';
     +-----------------+-------+
     | Variable_name   | Value |
     +-----------------+-------+
     | max_error_count | 64    |
     +-----------------+-------+
     1 row in set (0.00 sec)

     mysql> SET max_error_count=1, sql_mode = '';
     Query OK, 0 rows affected (0.00 sec)

     mysql> ALTER TABLE t1 MODIFY b CHAR;
     Query OK, 3 rows affected, 3 warnings (0.00 sec)
     Records: 3  Duplicates: 0  Warnings: 3

     mysql> SHOW WARNINGS;
     +---------+------+----------------------------------------+
     | Level   | Code | Message                                |
     +---------+------+----------------------------------------+
     | Warning | 1263 | Data truncated for column 'b' at row 1 |
     +---------+------+----------------------------------------+
     1 row in set (0.00 sec)

     mysql> SELECT @@warning_count;
     +-----------------+
     | @@warning_count |
     +-----------------+
     |               3 |
     +-----------------+
     1 row in set (0.01 sec)

To disable message storage, set `max_error_count' to 0. In this case,
`warning_count' still indicates how many warnings occurred, but
messages are not stored and cannot be displayed.

The `sql_notes' system variable controls whether note messages increment
`warning_count' and whether the server stores them. By default,
`sql_notes' is 1, but if set to 0, notes do not increment
`warning_count' and the server does not store them:

     mysql> SET sql_notes = 1;
     mysql> DROP TABLE IF EXISTS test.no_such_table;
     Query OK, 0 rows affected, 1 warning (0.00 sec)
     mysql> SHOW WARNINGS;
     +-------+------+-------------------------------+
     | Level | Code | Message                       |
     +-------+------+-------------------------------+
     | Note  | 1051 | Unknown table 'no_such_table' |
     +-------+------+-------------------------------+
     1 row in set (0.00 sec)

     mysql> SET sql_notes = 0;
     mysql> DROP TABLE IF EXISTS test.no_such_table;
     Query OK, 0 rows affected (0.00 sec)
     mysql> SHOW WARNINGS;
     Empty set (0.00 sec)

The MySQL server sends to each client a count indicating the total
number of errors, warnings, and notes resulting from the most recent
statement executed by that client. From the C API, this value can be
obtained by calling *Note `mysql_warning_count()': mysql-warning-count.
See *Note mysql-warning-count::.


File: manual.info,  Node: other-administrative-sql,  Prev: show,  Up: sql-syntax-server-administration

13.7.6 Other Administrative Statements
--------------------------------------

* Menu:

* binlog::                       `BINLOG' Syntax
* cache-index::                  `CACHE INDEX' Syntax
* flush::                        `FLUSH' Syntax
* kill::                         `KILL' Syntax
* load-index::                   `LOAD INDEX INTO CACHE' Syntax
* reset::                        `RESET' Syntax


File: manual.info,  Node: binlog,  Next: cache-index,  Prev: other-administrative-sql,  Up: other-administrative-sql

13.7.6.1 `BINLOG' Syntax
........................

     BINLOG 'STR'

*Note `BINLOG': binlog. is an internal-use statement. It is generated
by the *Note `mysqlbinlog': mysqlbinlog.  program as the printable
representation of certain events in binary log files. (See *Note
mysqlbinlog::.) The `'STR'' value is a base 64-encoded string the that
server decodes to determine the data change indicated by the
corresponding event. This statement requires the `SUPER' privilege.


File: manual.info,  Node: cache-index,  Next: flush,  Prev: binlog,  Up: other-administrative-sql

13.7.6.2 `CACHE INDEX' Syntax
.............................

     CACHE INDEX
       TBL_INDEX_LIST [, TBL_INDEX_LIST] ...
       [PARTITION (PARTITION_LIST | ALL)]
       IN KEY_CACHE_NAME

     TBL_INDEX_LIST:
       TBL_NAME [[INDEX|KEY] (INDEX_NAME[, INDEX_NAME] ...)]

     PARTITION_LIST:
       PARTITION_NAME[, PARTITION_NAME][, ...]

The *Note `CACHE INDEX': cache-index. statement assigns table indexes
to a specific key cache. It is used only for `MyISAM' tables. After the
indexes have been assigned, they can be preloaded into the cache if
desired with *Note `LOAD INDEX INTO CACHE': load-index.

The following statement assigns indexes from the tables `t1', `t2', and
`t3' to the key cache named `hot_cache':

     mysql> CACHE INDEX t1, t2, t3 IN hot_cache;
     +---------+--------------------+----------+----------+
     | Table   | Op                 | Msg_type | Msg_text |
     +---------+--------------------+----------+----------+
     | test.t1 | assign_to_keycache | status   | OK       |
     | test.t2 | assign_to_keycache | status   | OK       |
     | test.t3 | assign_to_keycache | status   | OK       |
     +---------+--------------------+----------+----------+

The syntax of *Note `CACHE INDEX': cache-index. enables you to specify
that only particular indexes from a table should be assigned to the
cache. The current implementation assigns all the table's indexes to
the cache, so there is no reason to specify anything other than the
table name.

The key cache referred to in a *Note `CACHE INDEX': cache-index.
statement can be created by setting its size with a parameter setting
statement or in the server parameter settings. For example:

     mysql> SET GLOBAL keycache1.key_buffer_size=128*1024;

Key cache parameters can be accessed as members of a structured system
variable. See *Note structured-system-variables::.

A key cache must exist before you can assign indexes to it:

     mysql> CACHE INDEX t1 IN non_existent_cache;
     ERROR 1284 (HY000): Unknown key cache 'non_existent_cache'

By default, table indexes are assigned to the main (default) key cache
created at the server startup. When a key cache is destroyed, all
indexes assigned to it become assigned to the default key cache again.

Index assignment affects the server globally: If one client assigns an
index to a given cache, this cache is used for all queries involving
the index, no matter which client issues the queries.

In MySQL 5.5, this statement is also supported for partitioned `MyISAM'
tables. You can assign one or more indexes for one, several, or all
partitions to a given key cache. For example, you can do the following:

     CREATE TABLE pt (c1 INT, c2 VARCHAR(50), INDEX i(c1))
         PARTITION BY HASH(c1)
         PARTITIONS 4;

     SET GLOBAL kc_fast.key_buffer_size = 128 * 1024;
     SET GLOBAL kc_slow.key_buffer_size = 128 * 1024;

     CACHE INDEX pt PARTITION (p0) IN kc_fast;
     CACHE INDEX pt PARTITION (p1, p3) IN kc_slow;

The previous set of statements performs the following actions:

   * Creates a partitioned table with 4 partitions; these partitions
     are automatically named `p0', ..., `p3'; this table has an index
     named `i' on column `c1'.

   * Creates 2 key caches named `kc_fast' and `kc_slow'

   * Assigns the index for partition `p0' to the `kc_fast' key cache
     and the index for partitions `p1' and `p3' to the `kc_slow' key
     cache; the index for the remaining partition (`p2') uses the
     server's default key cache.

If you wish instead to assign the indexes for all partitions in table
`pt' to a single key cache named `kc_all', you can use either one of the
following 2 statements:

     CACHE INDEX pt PARTITION (ALL) IN kc_all;

     CACHE INDEX pt IN kc_all;

The two statements just shown are equivalent, and issuing either one of
them has exactly the same effect. In other words, if you wish to assign
indexes for all partitions of a partitioned table to the same key
cache, then the `PARTITION (ALL)' clause is optional.

When assigning indexes for multiple partitions to a key cache, the
partitions do not have to be contiguous, and you are not required to
list their names in any particular order. Indexes for any partitions
that are not explicitly assigned to a key cache automatically use the
server's default key cache.

As of MySQL 5.5, index preloading is also supported for partitioned
`MyISAM' tables. For more information, see *Note load-index::.


File: manual.info,  Node: flush,  Next: kill,  Prev: cache-index,  Up: other-administrative-sql

13.7.6.3 `FLUSH' Syntax
.......................

     FLUSH [NO_WRITE_TO_BINLOG | LOCAL]
         FLUSH_OPTION [, FLUSH_OPTION] ...

The *Note `FLUSH': flush. statement has several variant forms that
clear or reload various internal caches, flush tables, or acquire
locks. To execute *Note `FLUSH': flush, you must have the `RELOAD'
privilege. Specific flush options might require additional privileges,
as described later.

By default, the server writes *Note `FLUSH': flush. statements to the
binary log so that they replicate to replication slaves. To suppress
logging, specify the optional `NO_WRITE_TO_BINLOG' keyword or its alias
`LOCAL'.

*Note*:

*Note `FLUSH LOGS': flush, *Note `FLUSH MASTER': flush, *Note `FLUSH
SLAVE': flush, and *Note `FLUSH TABLES WITH READ LOCK': flush. (with or
without a table list) are not written to the binary log in any case
because they would cause problems if replicated to a slave.

Sending a `SIGHUP' signal to the server causes several flush operations
to occur that are similar to various forms of the *Note `FLUSH': flush.
statement. See *Note server-signal-response::.

The *Note `FLUSH': flush. statement causes an implicit commit. See
*Note implicit-commit::.

The *Note `RESET': reset. statement is similar to *Note `FLUSH': flush.
See *Note reset::, for information about using the *Note `RESET':
reset. statement with replication.

FLUSH_OPTION can be any of the following items.

   * `DES_KEY_FILE'

     Reloads the DES keys from the file that was specified with the
     `--des-key-file' option at server startup time.

   * `HOSTS'

     Empties the host cache. You should flush the host cache if some of
     your hosts change IP address or if the error message `Host
     'HOST_NAME' is blocked' occurs. (See *Note blocked-host::.) When
     more than `max_connect_errors' errors occur successively for a
     given host while connecting to the MySQL server, MySQL assumes
     that something is wrong and blocks the host from further
     connection requests. Flushing the host cache enables further
     connection attempts from the host. The default value of
     `max_connect_errors' is 10.  To avoid this error message, start
     the server with `max_connect_errors' set to a large value.

   * `[LOG_TYPE] LOGS'

     With no LOG_TYPE option, *Note `FLUSH LOGS': flush.  closes and
     reopens all log files. If binary logging is enabled, the sequence
     number of the binary log file is incremented by one relative to
     the previous file.

     Prior to MySQL 5.5.7, if you flush the logs using *Note `FLUSH
     LOGS': flush.  and *Note `mysqld': mysqld. is writing the error
     log to a file (for example, if it was started with the
     `--log-error' option), log file renaming may occur, as described in
     *Note error-log::.

     With a LOG_TYPE option, only the specified log type is flushed.
     These LOG_TYPE options are permitted:

        * `BINARY' closes and reopens the binary log files.

        * `ENGINE' closes and reopens any flushable logs for installed
          storage engines. Currently, this causes *Note `InnoDB':
          innodb-storage-engine. to flush its logs to disk.

        * `ERROR' closes and reopens the error log file.

        * `GENERAL' closes and reopens the general query log file.

        * `RELAY' closes and reopens the relay log files.

        * `SLOW' closes and reopens the slow query log file.

     The LOG_TYPE options were added in MySQL 5.5.3.

   * `MASTER'

     Deletes all binary logs, resets the binary log index file and
     creates a new binary log.  *Note `FLUSH MASTER': flush. is
     deprecated in favor of *Note `RESET MASTER': reset-master.  *Note
     `FLUSH MASTER': flush. is still accepted in MySQL 5.5 for backward
     compatibility, but is removed in MySQL 5.6. See *Note
     reset-master::.

   * `PRIVILEGES'

     Reloads the privileges from the grant tables in the `mysql'
     database.

     The server caches information in memory as a result of *Note
     `GRANT': grant, *Note `CREATE USER': create-user, *Note `CREATE
     SERVER': create-server, and *Note `INSTALL PLUGIN':
     install-plugin. statements.  This memory is not released by the
     corresponding *Note `REVOKE': revoke, *Note `DROP USER': drop-user,
     *Note `DROP SERVER': drop-server, and *Note `UNINSTALL PLUGIN':
     uninstall-plugin. statements, so for a server that executes many
     instances of the statements that cause caching, there will be an
     increase in memory use. This cached memory can be freed with *Note
     `FLUSH PRIVILEGES': flush.

   * `QUERY CACHE'

     Defragment the query cache to better utilize its memory.  *Note
     `FLUSH QUERY CACHE': flush. does not remove any queries from the
     cache, unlike *Note `FLUSH TABLES': flush. or `RESET QUERY CACHE'.

   * `SLAVE'

     Resets all replication slave parameters, including relay log files
     and replication position in the master's binary logs.  *Note
     `FLUSH SLAVE': flush.  is deprecated in favor of *Note `RESET
     SLAVE': reset-slave.  *Note `FLUSH SLAVE': flush.  is still
     accepted in MySQL 5.5 for backward compatibility, but is removed
     in MySQL 5.6. See *Note reset-slave::.

   * `STATUS'

     This option adds the current thread's session status variable
     values to the global values and resets the session values to zero.
     Some global variables may be reset to zero as well. It also resets
     the counters for key caches (default and named) to zero and sets
     `Max_used_connections' to the current number of open connections.
     This is something you should use only when debugging a query. See
     *Note bug-reports::.

   * `TABLES'

     *Note `FLUSH TABLES': flush. flushes tables, and, depending on the
     variant used, acquires locks. The permitted syntax is discussed
     later in this section.

   * `USER_RESOURCES'

     Resets all per-hour user resources to zero. This enables clients
     that have reached their hourly connection, query, or update limits
     to resume activity immediately.  *Note `FLUSH USER_RESOURCES':
     flush. does not apply to the limit on maximum simultaneous
     connections. See *Note user-resources::.

The *Note `mysqladmin': mysqladmin. utility provides a command-line
interface to some flush operations, using commands such as
`flush-hosts', `flush-logs', `flush-privileges', `flush-status', and
`flush-tables'. See *Note mysqladmin::.

*Note*:

It is not possible to issue *Note `FLUSH': flush. statements within
stored functions or triggers. However, you may use *Note `FLUSH':
flush. in stored procedures, so long as these are not called from
stored functions or triggers. See *Note stored-program-restrictions::.

* `FLUSH TABLES' Syntax *

*Note `FLUSH TABLES': flush.  has several forms, described following.
As of MySQL 5.5.3, if any variant of the `TABLES' option is used in a
*Note `FLUSH': flush. statement, it must be the only option used. *Note
`FLUSH TABLE': flush. is a synonym for *Note `FLUSH TABLES': flush,
except that `TABLE' does not work with the `WITH READ LOCK' variants
prior to MySQL 5.5.3.

   * `FLUSH TABLES'

     Closes all open tables, forces all tables in use to be closed, and
     flushes the query cache.  *Note `FLUSH TABLES': flush. also
     removes all query results from the query cache, like the `RESET
     QUERY CACHE' statement.

     As of MySQL 5.5.3, *Note `FLUSH TABLES': flush. is not permitted
     when there is an active *Note `LOCK TABLES ... READ': lock-tables.
     To flush and lock tables, use *Note `FLUSH TABLES TBL_NAME ...
     WITH READ LOCK': flush. instead.

   * `FLUSH TABLES TBL_NAME [, TBL_NAME] ...'

     With a list of one or more comma-separated table names, this
     statement is like *Note `FLUSH TABLES': flush. with no names
     except that the server flushes only the named tables. No error
     occurs if a named table does not exist.

   * `FLUSH TABLES WITH READ LOCK'

     Closes all open tables and locks all tables for all databases with
     a global read lock. This is a very convenient way to get backups
     if you have a file system such as Veritas or ZFS that can take
     snapshots in time. Use *Note `UNLOCK TABLES': lock-tables. to
     release the lock.

     *Note `FLUSH TABLES WITH READ LOCK': flush. acquires a global read
     lock and not table locks, so it is not subject to the same
     behavior as *Note `LOCK TABLES': lock-tables. and *Note `UNLOCK
     TABLES': lock-tables. with respect to table locking and implicit
     commits:

        * *Note `UNLOCK TABLES': lock-tables. implicitly commits any
          active transaction only if any tables currently have been
          locked with *Note `LOCK TABLES': lock-tables.  The commit
          does not occur for *Note `UNLOCK TABLES': lock-tables.
          following *Note `FLUSH TABLES WITH READ LOCK': flush. because
          the latter statement does not acquire table locks.

        * Beginning a transaction causes table locks acquired with
          *Note `LOCK TABLES': lock-tables. to be released, as though
          you had executed *Note `UNLOCK TABLES': lock-tables.
          Beginning a transaction does not release a global read lock
          acquired with *Note `FLUSH TABLES WITH READ LOCK': flush.

     *Note `FLUSH TABLES WITH READ LOCK': flush. does not prevent the
     server from inserting rows into the log tables (see *Note
     log-destinations::).

   * `FLUSH TABLES TBL_NAME [, TBL_NAME] ... WITH READ LOCK'

     This statement flushes and acquires read locks for the named
     tables. The statement first acquires exclusive metadata locks for
     the tables, so it waits for transactions that have those tables
     open to complete. Then the statement flushes the tables from the
     table cache, reopens the tables, acquires table locks (like *Note
     `LOCK TABLES ... READ': lock-tables.), and downgrades the metadata
     locks from exclusive to shared. After the statement acquires locks
     and downgrades the metadata locks, other sessions can read but not
     modify the tables.

     Because this statement acquires table locks, you must have the
     `LOCK TABLES' privilege for each table, in addition to the
     `RELOAD' privilege that is required to use any *Note `FLUSH':
     flush.  statement.

     This statement applies only to existing base tables. If a name
     refers to a base table, that table is used. If it refers to a
     `TEMPORARY' table, it is ignored. If a name applies to a view, an
     `ER_WRONG_OBJECT' error occurs. Otherwise, an `ER_NO_SUCH_TABLE'
     error occurs.

     Use *Note `UNLOCK TABLES': lock-tables. to release the locks,
     *Note `LOCK TABLES': lock-tables. to release the locks and acquire
     other locks, or `START TRANSACTION' to release the locks and begin
     a new transaction.

     This variant of `FLUSH' enables tables to be flushed and locked in
     a single operation. It provides a workaround for the restriction
     as of MySQL 5.5.3 that *Note `FLUSH TABLES': flush. is not
     permitted when there is an active *Note `LOCK TABLES ... READ':
     lock-tables.

     This statement does not perform an implicit *Note `UNLOCK TABLES':
     lock-tables, so an error results if you use the statement while
     there is any active *Note `LOCK TABLES': lock-tables. or use it a
     second time without first releasing the locks acquired.

     If a flushed table was opened with *Note `HANDLER': handler, the
     handler is implicitly flushed and loses its position.

     This variant of *Note `FLUSH': flush. is available as of MySQL
     5.5.3.


File: manual.info,  Node: kill,  Next: load-index,  Prev: flush,  Up: other-administrative-sql

13.7.6.4 `KILL' Syntax
......................

     KILL [CONNECTION | QUERY] THREAD_ID

Each connection to *Note `mysqld': mysqld. runs in a separate thread.
You can see which threads are running with the *Note `SHOW
PROCESSLIST': show-processlist. statement and kill a thread with the
`KILL THREAD_ID' statement.

*Note `KILL': kill. permits an optional `CONNECTION' or `QUERY'
modifier:

   * *Note `KILL CONNECTION': kill. is the same as *Note `KILL': kill.
     with no modifier: It terminates the connection associated with the
     given THREAD_ID.

   * *Note `KILL QUERY': kill.  terminates the statement that the
     connection is currently executing, but leaves the connection
     itself intact.

If you have the `PROCESS' privilege, you can see all threads. If you
have the `SUPER' privilege, you can kill all threads and statements.
Otherwise, you can see and kill only your own threads and statements.

You can also use the *Note `mysqladmin processlist': mysqladmin.  and
*Note `mysqladmin kill': mysqladmin. commands to examine and kill
threads.

*Note*:

You cannot use *Note `KILL': kill. with the Embedded MySQL Server
library because the embedded server merely runs inside the threads of
the host application. It does not create any connection threads of its
own.

When you use *Note `KILL': kill, a thread-specific kill flag is set for
the thread. In most cases, it might take some time for the thread to
die because the kill flag is checked only at specific intervals:

   * In *Note `SELECT': select, `ORDER BY' and `GROUP BY' loops, the
     flag is checked after reading a block of rows. If the kill flag is
     set, the statement is aborted.

   * During *Note `ALTER TABLE': alter-table, the kill flag is checked
     before each block of rows are read from the original table. If the
     kill flag was set, the statement is aborted and the temporary
     table is deleted.

   * During *Note `UPDATE': update. or *Note `DELETE': delete.
     operations, the kill flag is checked after each block read and
     after each updated or deleted row. If the kill flag is set, the
     statement is aborted. Note that if you are not using transactions,
     the changes are not rolled back.

   * `GET_LOCK()' aborts and returns `NULL'.

   * An *Note `INSERT DELAYED': insert-delayed. thread quickly flushes
     (inserts) all rows it has in memory and then terminates.

   * If the thread is in the table lock handler (state: `Locked'), the
     table lock is quickly aborted.

   * If the thread is waiting for free disk space in a write call, the
     write is aborted with a `disk full' error message.

   * *Warning*:

     Killing a *Note `REPAIR TABLE': repair-table. or *Note `OPTIMIZE
     TABLE': optimize-table. operation on a `MyISAM' table results in a
     table that is corrupted and unusable. Any reads or writes to such a
     table fail until you optimize or repair it again (without
     interruption).


File: manual.info,  Node: load-index,  Next: reset,  Prev: kill,  Up: other-administrative-sql

13.7.6.5 `LOAD INDEX INTO CACHE' Syntax
.......................................

     LOAD INDEX INTO CACHE
       TBL_INDEX_LIST [, TBL_INDEX_LIST] ...

     TBL_INDEX_LIST:
       TBL_NAME
         [PARTITION (PARTITION_LIST | ALL)]
         [[INDEX|KEY] (INDEX_NAME[, INDEX_NAME] ...)]
         [IGNORE LEAVES]

     PARTITION_LIST:
         PARTITION_NAME[, PARTITION_NAME][, ...]

The *Note `LOAD INDEX INTO CACHE': load-index. statement preloads a
table index into the key cache to which it has been assigned by an
explicit *Note `CACHE INDEX': cache-index. statement, or into the
default key cache otherwise.

*Note `LOAD INDEX INTO CACHE': load-index. is used only for `MyISAM'
tables. In MySQL 5.5, it is also supported for partitioned `MyISAM'
tables; in addition, indexes on partitioned tables can be preloaded for
one, several, or all partitions.

The `IGNORE LEAVES' modifier causes only blocks for the nonleaf nodes
of the index to be preloaded.

`IGNORE LEAVES' is also supported for partitioned `MyISAM' tables.

The following statement preloads nodes (index blocks) of indexes for
the tables `t1' and `t2':

     mysql> LOAD INDEX INTO CACHE t1, t2 IGNORE LEAVES;
     +---------+--------------+----------+----------+
     | Table   | Op           | Msg_type | Msg_text |
     +---------+--------------+----------+----------+
     | test.t1 | preload_keys | status   | OK       |
     | test.t2 | preload_keys | status   | OK       |
     +---------+--------------+----------+----------+

This statement preloads all index blocks from `t1'. It preloads only
blocks for the nonleaf nodes from `t2'.

The syntax of *Note `LOAD INDEX INTO CACHE': load-index. enables you to
specify that only particular indexes from a table should be preloaded.
The current implementation preloads all the table's indexes into the
cache, so there is no reason to specify anything other than the table
name.

In MySQL 5.5, it is possible to preload indexes on specific partitions
of partitioned `MyISAM' tables. For example, of the following 2
statements, the first preloads indexes for partition `p0' of a
partitioned table `pt', while the second preloads the indexes for
partitions `p1' and `p3' of the same table:

     LOAD INDEX INTO CACHE pt PARTITION (p0);
     LOAD INDEX INTO CACHE pt PARTITION (p1, p3);

To preload the indexes for all partitions in table `pt', you can use
either one of the following 2 statements:

     LOAD INDEX INTO CACHE pt PARTITION (ALL);

     LOAD INDEX INTO CACHE pt;

The two statements just shown are equivalent, and issuing either one of
them has exactly the same effect. In other words, if you wish to
preload indexes for all partitions of a partitioned table, then the
`PARTITION (ALL)' clause is optional.

When preloading indexes for multiple partitions, the partitions do not
have to be contiguous, and you are not required to list their names in
any particular order.

*Note `LOAD INDEX INTO CACHE ... IGNORE LEAVES': load-index. fails
unless all indexes in a table have the same block size. You can
determine index block sizes for a table by using *Note `myisamchk -dv':
myisamchk. and checking the `Blocksize' column.


File: manual.info,  Node: reset,  Prev: load-index,  Up: other-administrative-sql

13.7.6.6 `RESET' Syntax
.......................

     RESET RESET_OPTION [, RESET_OPTION] ...

The *Note `RESET': reset. statement is used to clear the state of
various server operations. You must have the `RELOAD' privilege to
execute *Note `RESET': reset.

*Note `RESET': reset. acts as a stronger version of the *Note `FLUSH':
flush. statement. See *Note flush::.

The *Note `RESET': reset. statement causes an implicit commit. See
*Note implicit-commit::.

RESET_OPTION can be any of the following:

   * `MASTER'

     Deletes all binary logs listed in the index file, resets the
     binary log index file to be empty, and creates a new binary log
     file.

   * `QUERY CACHE'

     Removes all query results from the query cache.

   * `SLAVE'

     Makes the slave forget its replication position in the master
     binary logs. Also resets the relay log by deleting any existing
     relay log files and beginning a new one.


File: manual.info,  Node: sql-syntax-utility,  Prev: sql-syntax-server-administration,  Up: sql-syntax

13.8 MySQL Utility Statements
=============================

* Menu:

* describe::                     `DESCRIBE' Syntax
* explain::                      `EXPLAIN' Syntax
* help::                         `HELP' Syntax
* use::                          `USE' Syntax


File: manual.info,  Node: describe,  Next: explain,  Prev: sql-syntax-utility,  Up: sql-syntax-utility

13.8.1 `DESCRIBE' Syntax
------------------------

The *Note `DESCRIBE': describe. and *Note `EXPLAIN': explain.
statements are synonyms, used either to obtain information about table
structure or query execution plans. For more information, see *Note
show-columns::, and *Note explain::.


File: manual.info,  Node: explain,  Next: help,  Prev: describe,  Up: sql-syntax-utility

13.8.2 `EXPLAIN' Syntax
-----------------------

     {EXPLAIN | DESCRIBE | DESC}
         TBL_NAME [COL_NAME | WILD]

     {EXPLAIN | DESCRIBE | DESC}
         [EXPLAIN_TYPE] SELECT SELECT_OPTIONS

     EXPLAIN_TYPE: {EXTENDED | PARTITIONS}

The *Note `DESCRIBE': describe. and *Note `EXPLAIN': explain.
statements are synonyms. In practice, the *Note `DESCRIBE': describe.
keyword is more often used to obtain information about table structure,
whereas *Note `EXPLAIN': explain. is used to obtain a query execution
plan (that is, an explanation of how MySQL would execute a query). The
following discussion uses the *Note `DESCRIBE': describe. and *Note
`EXPLAIN': explain. keywords in accordance with those uses, but the
MySQL parser treats them as completely synonymous.

* Obtaining Table Structure Information *

*Note `DESCRIBE': describe. provides information about the columns in a
table:

     mysql> DESCRIBE City;
     +------------+----------+------+-----+---------+----------------+
     | Field      | Type     | Null | Key | Default | Extra          |
     +------------+----------+------+-----+---------+----------------+
     | Id         | int(11)  | NO   | PRI | NULL    | auto_increment |
     | Name       | char(35) | NO   |     |         |                |
     | Country    | char(3)  | NO   | UNI |         |                |
     | District   | char(20) | YES  | MUL |         |                |
     | Population | int(11)  | NO   |     | 0       |                |
     +------------+----------+------+-----+---------+----------------+

*Note `DESCRIBE': describe. is a shortcut for *Note `SHOW COLUMNS':
show-columns. These statements also display information for views. The
description for *Note `SHOW COLUMNS': show-columns. provides more
information about the output columns. See *Note show-columns::.

By default, *Note `DESCRIBE': describe. displays information about all
columns in the table.  COL_NAME, if given, is the name of a column in
the table. In this case, the statement displays information only for
the named column.  WILD, if given, is a pattern string. It can contain
the SQL ``%'' and ``_'' wildcard characters. In this case, the
statement displays output only for the columns with names matching the
string. There is no need to enclose the string within quotation marks
unless it contains spaces or other special characters.

The *Note `DESCRIBE': describe. statement is provided for compatibility
with Oracle.

The *Note `SHOW CREATE TABLE': show-create-table, *Note `SHOW TABLE
STATUS': show-table-status, and *Note `SHOW INDEX': show-index.
statements also provide information about tables. See *Note show::.

* Obtaining Execution Plan Information *

The *Note `EXPLAIN': explain. statement provides information about how
MySQL executes statements:

   * When you precede a *Note `SELECT': select.  statement with the
     keyword *Note `EXPLAIN': explain, MySQL displays information from
     the optimizer about the statement execution plan. That is, MySQL
     explains how it would process the statement, including information
     about how tables are joined and in which order. For information
     about using *Note `EXPLAIN': explain. to obtain execution plan
     information, see *Note explain-output::.

   * *Note `EXPLAIN EXTENDED': explain-extended. can be used to obtain
     additional execution plan information. See *Note
     explain-extended::.

   * *Note `EXPLAIN PARTITIONS': explain. is useful for examining
     queries involving partitioned tables. See *Note
     partitioning-info::.

With the help of *Note `EXPLAIN': explain, you can see where you should
add indexes to tables so that the statement executes faster by using
indexes to find rows. You can also use *Note `EXPLAIN': explain. to
check whether the optimizer joins the tables in an optimal order. To
give a hint to the optimizer to use a join order corresponding to the
order in which the tables are named in a *Note `SELECT': select.
statement, begin the statement with `SELECT STRAIGHT_JOIN' rather than
just *Note `SELECT': select. (See *Note select::.)

If you have a problem with indexes not being used when you believe that
they should be, run *Note `ANALYZE TABLE': analyze-table. to update
table statistics, such as cardinality of keys, that can affect the
choices the optimizer makes. See *Note analyze-table::.


File: manual.info,  Node: help,  Next: use,  Prev: explain,  Up: sql-syntax-utility

13.8.3 `HELP' Syntax
--------------------

     HELP 'SEARCH_STRING'

The *Note `HELP': help. statement returns online information from the
MySQL Reference manual. Its proper operation requires that the help
tables in the `mysql' database be initialized with help topic
information (see *Note server-side-help-support::).

The *Note `HELP': help. statement searches the help tables for the
given search string and displays the result of the search. The search
string is not case sensitive.

The search string can contain the the wildcard characters ``%'' and
``_''. These have the same meaning as for pattern-matching operations
performed with the `LIKE' operator. For example, `HELP 'rep%'' returns
a list of topics that begin with `rep'.

The HELP statement understands several types of search strings:

   * At the most general level, use `contents' to retrieve a list of
     the top-level help categories:

          HELP 'contents'

   * For a list of topics in a given help category, such as `Data
     Types', use the category name:

          HELP 'data types'

   * For help on a specific help topic, such as the `ASCII()' function
     or the *Note `CREATE TABLE': create-table. statement, use the
     associated keyword or keywords:

          HELP 'ascii'
          HELP 'create table'

In other words, the search string matches a category, many topics, or a
single topic. You cannot necessarily tell in advance whether a given
search string will return a list of items or the help information for a
single help topic. However, you can tell what kind of response *Note
`HELP': help. returned by examining the number of rows and columns in
the result set.

The following descriptions indicate the forms that the result set can
take. Output for the example statements is shown using the familiar
`tabular' or `vertical' format that you see when using the *Note
`mysql': mysql. client, but note that *Note `mysql': mysql. itself
reformats *Note `HELP': help. result sets in a different way.

   * Empty result set

     No match could be found for the search string.

   * Result set containing a single row with three columns

     This means that the search string yielded a hit for the help
     topic. The result has three columns:

        * `name': The topic name.

        * `description': Descriptive help text for the topic.

        * `example': Usage example or examples.  This column might be
          blank.

     Example: `HELP 'replace''

     Yields:

          name: REPLACE
          description: Syntax:
          REPLACE(str,from_str,to_str)

          Returns the string str with all occurrences of the string from_str
          replaced by the string to_str. REPLACE() performs a case-sensitive
          match when searching for from_str.
          example: mysql> SELECT REPLACE('www.mysql.com', 'w', 'Ww');
                  -> 'WwWwWw.mysql.com'

   * Result set containing multiple rows with two columns

     This means that the search string matched many help topics.  The
     result set indicates the help topic names:

        * `name': The help topic name.

        * `is_it_category': `Y' if the name represents a help category,
          `N' if it does not. If it does not, the `name' value when
          specified as the argument to the *Note `HELP': help.
          statement should yield a single-row result set containing a
          description for the named item.

     Example: `HELP 'status''

     Yields:

          +-----------------------+----------------+
          | name                  | is_it_category |
          +-----------------------+----------------+
          | SHOW                  | N              |
          | SHOW ENGINE           | N              |
          | SHOW MASTER STATUS    | N              |
          | SHOW PROCEDURE STATUS | N              |
          | SHOW SLAVE STATUS     | N              |
          | SHOW STATUS           | N              |
          | SHOW TABLE STATUS     | N              |
          +-----------------------+----------------+

   * Result set containing multiple rows with three columns

     This means the search string matches a category. The result set
     contains category entries:

        * `source_category_name': The help category name.

        * `name': The category or topic name

        * `is_it_category': `Y' if the name represents a help category,
          `N' if it does not. If it does not, the `name' value when
          specified as the argument to the *Note `HELP': help.
          statement should yield a single-row result set containing a
          description for the named item.

     Example: `HELP 'functions''

     Yields:

          +----------------------+-------------------------+----------------+
          | source_category_name | name                    | is_it_category |
          +----------------------+-------------------------+----------------+
          | Functions            | CREATE FUNCTION         | N              |
          | Functions            | DROP FUNCTION           | N              |
          | Functions            | Bit Functions           | Y              |
          | Functions            | Comparison operators    | Y              |
          | Functions            | Control flow functions  | Y              |
          | Functions            | Date and Time Functions | Y              |
          | Functions            | Encryption Functions    | Y              |
          | Functions            | Information Functions   | Y              |
          | Functions            | Logical operators       | Y              |
          | Functions            | Miscellaneous Functions | Y              |
          | Functions            | Numeric Functions       | Y              |
          | Functions            | String Functions        | Y              |
          +----------------------+-------------------------+----------------+


File: manual.info,  Node: use,  Prev: help,  Up: sql-syntax-utility

13.8.4 `USE' Syntax
-------------------

     USE DB_NAME

The `USE DB_NAME' statement tells MySQL to use the DB_NAME database as
the default (current) database for subsequent statements. The database
remains the default until the end of the session or another *Note
`USE': use. statement is issued:

     USE db1;
     SELECT COUNT(*) FROM mytable;   # selects from db1.mytable
     USE db2;
     SELECT COUNT(*) FROM mytable;   # selects from db2.mytable

Making a particular database the default by means of the *Note `USE':
use. statement does not preclude you from accessing tables in other
databases. The following example accesses the `author' table from the
`db1' database and the `editor' table from the `db2' database:

     USE db1;
     SELECT author_name,editor_name FROM author,db2.editor
       WHERE author.editor_id = db2.editor.editor_id;


File: manual.info,  Node: storage-engines,  Next: ha-overview,  Prev: sql-syntax,  Up: Top

14 Storage Engines
******************

* Menu:

* storage-engine-setting::       Setting the Storage Engine
* pluggable-storage-overview::   Overview of MySQL Storage Engine Architecture
* innodb-storage-engine::        The `InnoDB' Storage Engine
* innodb-5-5::                   New Features of InnoDB 1.1
* myisam-storage-engine::        The `MyISAM' Storage Engine
* memory-storage-engine::        The `MEMORY' Storage Engine
* csv-storage-engine::           The `CSV' Storage Engine
* archive-storage-engine::       The `ARCHIVE' Storage Engine
* blackhole-storage-engine::     The `BLACKHOLE' Storage Engine
* merge-storage-engine::         The `MERGE' Storage Engine
* federated-storage-engine::     The `FEDERATED' Storage Engine
* example-storage-engine::       The `EXAMPLE' Storage Engine
* storage-engines-other::        Other Storage Engines

MySQL supports several storage engines that act as handlers for
different table types. MySQL storage engines include both those that
handle transaction-safe tables and those that handle
nontransaction-safe tables.

MySQL Server uses a pluggable storage engine architecture that enables
storage engines to be loaded into and unloaded from a running MySQL
server.

To determine which storage engines your server supports by using the
*Note `SHOW ENGINES': show-engines. statement. The value in the
`Support' column indicates whether an engine can be used. A value of
`YES', `NO', or `DEFAULT' indicates that an engine is available, not
available, or available and currently set as the default storage engine.

     mysql> SHOW ENGINES\G
     *************************** 1. row ***************************
           Engine: FEDERATED
          Support: NO
          Comment: Federated MySQL storage engine
     Transactions: NULL
               XA: NULL
       Savepoints: NULL
     *************************** 2. row ***************************
           Engine: MRG_MYISAM
          Support: YES
          Comment: Collection of identical MyISAM tables
     Transactions: NO
               XA: NO
       Savepoints: NO
     *************************** 3. row ***************************
           Engine: MyISAM
          Support: DEFAULT
          Comment: Default engine as of MySQL 3.23 with great performance
     Transactions: NO
               XA: NO
       Savepoints: NO
     ...

This chapter describes each of the MySQL storage engines except for
`NDBCLUSTER', which is covered in *Note mysql-cluster::. It also
contains a description of the pluggable storage engine architecture (see
*Note pluggable-storage-overview::).

For information about storage engine support offered in commercial
MySQL Server binaries, see `MySQL Enterprise Server 5.1'
(http://www.mysql.com/products/enterprise/server.html), on the MySQL
Web site.  The storage engines available might depend on which edition
of Enterprise Server you are using.

For answers to some commonly asked questions about MySQL storage
engines, see *Note faqs-storage-engines::.

*MySQL 5.5 supported storage engines*

   * *Note `InnoDB': innodb-storage-engine.: A transaction-safe (ACID
     compliant) storage engine for MySQL that has commit, rollback, and
     crash-recovery capabilities to protect user data. `InnoDB'
     row-level locking (without escalation to coarser granularity
     locks) and Oracle-style consistent nonlocking reads increase
     multi-user concurrency and performance. `InnoDB' stores user data
     in clustered indexes to reduce I/O for common queries based on
     primary keys. To maintain data integrity, `InnoDB' also supports
     `FOREIGN KEY' referential-integrity constraints.  `InnoDB' is the
     default storage engine as of MySQL 5.5.5.

   * *Note `MyISAM': myisam-storage-engine.: The MySQL storage engine
     that is used the most in Web, data warehousing, and other
     application environments.  `MyISAM' is supported in all MySQL
     configurations, and is the default storage engine prior to MySQL
     5.5.5.

   * *Note `Memory': memory-storage-engine.: Stores all data in RAM for
     extremely fast access in environments that require quick lookups
     of reference and other like data.  This engine was formerly known
     as the `HEAP' engine.

   * *Note `Merge': merge-storage-engine.: Enables a MySQL DBA or
     developer to logically group a series of identical `MyISAM' tables
     and reference them as one object. Good for VLDB environments such
     as data warehousing.

   * *Note `Archive': archive-storage-engine.: Provides the perfect
     solution for storing and retrieving large amounts of
     seldom-referenced historical, archived, or security audit
     information.

   * *Note `Federated': federated-storage-engine.: Offers the ability
     to link separate MySQL servers to create one logical database from
     many physical servers. Very good for distributed or data mart
     environments.

   * *Note `NDB': mysql-cluster. (also known as *Note `NDBCLUSTER':
     mysql-cluster.)--This clustered database engine is particularly
     suited for applications that require the highest possible degree
     of uptime and availability.

     *Note*:

     The *Note `NDB': mysql-cluster. storage engine is not supported in
     standard MySQL 5.5 releases.  Currently supported MySQL Cluster
     releases include MySQL Cluster NDB 7.0 and MySQL Cluster NDB 7.1,
     which are based on MySQL 5.1, and MySQL Cluster NDB 7.2, which is
     based on MySQL 5.5. While based on MySQL Server, these releases
     also contain support for *Note `NDB': mysql-cluster.

   * *Note `CSV': csv-storage-engine.: The CSV storage engine stores
     data in text files using comma-separated values format. You can
     use the CSV engine to easily exchange data between other software
     and applications that can import and export in CSV format.

   * *Note `Blackhole': blackhole-storage-engine.: The Blackhole
     storage engine accepts but does not store data and retrievals
     always return an empty set. The functionality can be used in
     distributed database design where data is automatically
     replicated, but not stored locally.

   * *Note `Example': example-storage-engine.: The Example storage
     engine is `stub' engine that does nothing. You can create tables
     with this engine, but no data can be stored in them or retrieved
     from them. The purpose of this engine is to serve as an example in
     the MySQL source code that illustrates how to begin writing new
     storage engines.  As such, it is primarily of interest to
     developers.

It is important to remember that you are not restricted to using the
same storage engine for an entire server or schema: you can use a
different storage engine for each table in your schema.

*Choosing a Storage Engine*

The various storage engines provided with MySQL are designed with
different use cases in mind. To use the pluggable storage architecture
effectively, it is good to have an idea of the advantages and
disadvantages of the various storage engines. The following table
provides an overview of some storage engines provided with MySQL:

*Storage Engines Feature Summary*

Feature MyISAM       Memory       InnoDB       Archive      NDB
Storage 256TB        RAM          64TB         None         384EB
limits                                                      
TransactionsNo           No           Yes          No           Yes
Locking Table        Table        Row          Table        Row
granularity                                                    
MVCC    No           No           Yes          No           No
GeospatialYes          No           Yes          Yes          Yes
data                                                        
type                                                        
support                                                     
GeospatialYes          No           No           No           No
indexing                                                    
support                                                     
B-tree  Yes          Yes          Yes          No           No
indexes                                                     
T-tree  No           No           No           No           Yes
indexes                                                     
Hash    No           Yes          No InnoDB    No           Yes
indexes                           utilizes                  
                                  hash                      
                                  indexes                   
                                  internally                
                                  for its                   
                                  Adaptive                  
                                  Hash Index                
                                  feature.                  
Full-textYes          No           Yes InnoDB   No           No
search                            support for               
indexes                           FULLTEXT                  
                                  indexes is                
                                  available                 
                                  in MySQL                  
                                  5.6.4 and                 
                                  higher.                   
ClusteredNo           No           Yes          No           No
indexes                                                     
Data    No           N/A          Yes          No           Yes
caches                                                      
Index   Yes          N/A          Yes          No           Yes
caches                                                      
CompressedYes          No           Yes          Yes          No
data    Compressed                Compressed                
        MyISAM                    InnoDB                    
        tables are                tables                    
        supported                 require the               
        only when                 InnoDB                    
        using the                 Barracuda                 
        compressed                file format.              
        row format.                                         
        Tables                                              
        using the                                           
        compressed                                          
        row format                                          
        with MyISAM                                         
        are read                                            
        only.                                               
EncryptedYes          Yes          Yes          Yes          Yes
data                                                        
Implemented                                                    
in the                                                      
server                                                      
(via                                                        
encryption                                                    
functions),                                                    
rather                                                      
than                                                        
in the                                                      
storage                                                     
engine.                                                     
Cluster No           No           No           No           Yes
database                                                    
support                                                     
ReplicationYes          Yes          Yes          Yes          Yes
support                                                     
Implemented                                                    
in the                                                      
server,                                                     
rather                                                      
than                                                        
in the                                                      
storage                                                     
engine.                                                     
Foreign No           No           Yes          No           No
key                                                         
support                                                     
Backup  Yes          Yes          Yes          Yes          Yes
/                                                           
point-in-time                                                    
recovery                                                    
Implemented                                                    
in the                                                      
server,                                                     
rather                                                      
than                                                        
in the                                                      
storage                                                     
engine.                                                     
Query   Yes          Yes          Yes          Yes          Yes
cache                                                       
support                                                     
Update  Yes          Yes          Yes          Yes          Yes
statistics                                                    
for                                                         
data                                                        
dictionary                                                    


File: manual.info,  Node: storage-engine-setting,  Next: pluggable-storage-overview,  Prev: storage-engines,  Up: storage-engines

14.1 Setting the Storage Engine
===============================

When you create a new table, you can specify which storage engine to
use by adding an `ENGINE' table option to the *Note `CREATE TABLE':
create-table. statement:

     CREATE TABLE t (i INT) ENGINE = INNODB;

If you omit the `ENGINE' option, the default storage engine is used.
The default engine is *Note `InnoDB': innodb-storage-engine. as of
MySQL 5.5.5 (*Note `MyISAM': myisam-storage-engine. before 5.5.5). You
can specify the default engine by using the `--default-storage-engine'
server startup option, or by setting the `default-storage-engine'
option in the `my.cnf' configuration file.

You can set the default storage engine to be used during the current
session by setting the `default_storage_engine' variable:

     SET default_storage_engine=MYISAM;

When MySQL is installed on Windows using the MySQL Configuration
Wizard, the `InnoDB' or `MyISAM' storage engine can be selected as the
default. See *Note mysql-config-wizard-database-usage::.

To convert a table from one storage engine to another, use an *Note
`ALTER TABLE': alter-table. statement that indicates the new engine:

     ALTER TABLE t ENGINE = MYISAM;

See *Note create-table::, and *Note alter-table::.

If you try to use a storage engine that is not compiled in or that is
compiled in but deactivated, MySQL instead creates a table using the
default storage engine. This behavior is convenient when you want to
copy tables between MySQL servers that support different storage
engines. (For example, in a replication setup, perhaps your master
server supports transactional storage engines for increased safety, but
the slave servers use only nontransactional storage engines for greater
speed.)

This automatic substitution of the default storage engine for
unavailable engines can be confusing for new MySQL users. A warning is
generated whenever a storage engine is automatically changed. To
prevent this from happening if the desired engine is unavailable,
enable the `NO_ENGINE_SUBSTITUTION' SQL mode.  In this case, an error
occurs instead of a warning and the table is not created or altered if
the desired engine is unavailable.  See *Note server-sql-mode::.

For new tables, MySQL always creates an `.frm' file to hold the table
and column definitions. The table's index and data may be stored in one
or more other files, depending on the storage engine. The server
creates the `.frm' file above the storage engine level.  Individual
storage engines create any additional files required for the tables
that they manage. If a table name contains special characters, the
names for the table files contain encoded versions of those characters
as described in *Note identifier-mapping::.

A database may contain tables of different types. That is, tables need
not all be created with the same storage engine.


File: manual.info,  Node: pluggable-storage-overview,  Next: innodb-storage-engine,  Prev: storage-engine-setting,  Up: storage-engines

14.2 Overview of MySQL Storage Engine Architecture
==================================================

* Menu:

* pluggable-storage::            Pluggable Storage Engine Architecture
* pluggable-storage-common-layer::  The Common Database Server Layer

The MySQL pluggable storage engine architecture enables a database
professional to select a specialized storage engine for a particular
application need while being completely shielded from the need to
manage any specific application coding requirements.  The MySQL server
architecture isolates the application programmer and DBA from all of
the low-level implementation details at the storage level, providing a
consistent and easy application model and API. Thus, although there are
different capabilities across different storage engines, the
application is shielded from these differences.

The pluggable storage engine architecture provides a standard set of
management and support services that are common among all underlying
storage engines. The storage engines themselves are the components of
the database server that actually perform actions on the underlying
data that is maintained at the physical server level.

This efficient and modular architecture provides huge benefits for
those wishing to specifically target a particular application
need--such as data warehousing, transaction processing, or high
availability situations--while enjoying the advantage of utilizing a
set of interfaces and services that are independent of any one storage
engine.

The application programmer and DBA interact with the MySQL database
through Connector APIs and service layers that are above the storage
engines. If application changes bring about requirements that demand
the underlying storage engine change, or that one or more storage
engines be added to support new needs, no significant coding or process
changes are required to make things work. The MySQL server architecture
shields the application from the underlying complexity of the storage
engine by presenting a consistent and easy-to-use API that applies
across storage engines.


File: manual.info,  Node: pluggable-storage,  Next: pluggable-storage-common-layer,  Prev: pluggable-storage-overview,  Up: pluggable-storage-overview

14.2.1 Pluggable Storage Engine Architecture
--------------------------------------------

MySQL Server uses a pluggable storage engine architecture that enables
storage engines to be loaded into and unloaded from a running MySQL
server.

*Plugging in a Storage Engine*

Before a storage engine can be used, the storage engine plugin shared
library must be loaded into MySQL using the *Note `INSTALL PLUGIN':
install-plugin. statement. For example, if the `EXAMPLE' engine plugin
is named `example' and the shared library is named `ha_example.so', you
load it with the following statement:

     mysql> INSTALL PLUGIN example SONAME 'ha_example.so';

To install a pluggable storage engine, the plugin file must be located
in the MySQL plugin directory, and the user issuing the *Note `INSTALL
PLUGIN': install-plugin. statement must have `INSERT' privilege for the
`mysql.plugin' table.

The shared library must be located in the MySQL server plugin
directory, the location of which is given by the `plugin_dir' system
variable.

*Unplugging a Storage Engine*

To unplug a storage engine, use the *Note `UNINSTALL PLUGIN':
uninstall-plugin. statement:

     mysql> UNINSTALL PLUGIN example;

If you unplug a storage engine that is needed by existing tables, those
tables become inaccessible, but will still be present on disk (where
applicable). Ensure that there are no tables using a storage engine
before you unplug the storage engine.


File: manual.info,  Node: pluggable-storage-common-layer,  Prev: pluggable-storage,  Up: pluggable-storage-overview

14.2.2 The Common Database Server Layer
---------------------------------------

A MySQL pluggable storage engine is the component in the MySQL database
server that is responsible for performing the actual data I/O
operations for a database as well as enabling and enforcing certain
feature sets that target a specific application need. A major benefit
of using specific storage engines is that you are only delivered the
features needed for a particular application, and therefore you have
less system overhead in the database, with the end result being more
efficient and higher database performance. This is one of the reasons
that MySQL has always been known to have such high performance,
matching or beating proprietary monolithic databases in industry
standard benchmarks.

From a technical perspective, what are some of the unique supporting
infrastructure components that are in a storage engine? Some of the key
feature differentiations include:

   * _Concurrency_: Some applications have more granular lock
     requirements (such as row-level locks) than others. Choosing the
     right locking strategy can reduce overhead and therefore improve
     overall performance. This area also includes support for
     capabilities such as multi-version concurrency control or
     `snapshot' read.

   * _Transaction Support_: Not every application needs transactions,
     but for those that do, there are very well defined requirements
     such as ACID compliance and more.

   * _Referential Integrity_: The need to have the server enforce
     relational database referential integrity through DDL defined
     foreign keys.

   * _Physical Storage_: This involves everything from the overall page
     size for tables and indexes as well as the format used for storing
     data to physical disk.

   * _Index Support_: Different application scenarios tend to benefit
     from different index strategies.  Each storage engine generally
     has its own indexing methods, although some (such as B-tree
     indexes) are common to nearly all engines.

   * _Memory Caches_: Different applications respond better to some
     memory caching strategies than others, so although some memory
     caches are common to all storage engines (such as those used for
     user connections or MySQL's high-speed Query Cache), others are
     uniquely defined only when a particular storage engine is put in
     play.

   * _Performance Aids_: This includes multiple I/O threads for
     parallel operations, thread concurrency, database checkpointing,
     bulk insert handling, and more.

   * _Miscellaneous Target Features_: This may include support for
     geospatial operations, security restrictions for certain data
     manipulation operations, and other similar features.

Each set of the pluggable storage engine infrastructure components are
designed to offer a selective set of benefits for a particular
application. Conversely, avoiding a set of component features helps
reduce unnecessary overhead. It stands to reason that understanding a
particular application's set of requirements and selecting the proper
MySQL storage engine can have a dramatic impact on overall system
efficiency and performance.


File: manual.info,  Node: innodb-storage-engine,  Next: innodb-5-5,  Prev: pluggable-storage-overview,  Up: storage-engines

14.3 The `InnoDB' Storage Engine
================================

* Menu:

* innodb-default-se::            `InnoDB' as the Default MySQL Storage Engine
* innodb-configuration::         Configuring `InnoDB'
* innodb-multiple-tablespaces::  Using Per-Table Tablespaces
* innodb-parameters::            `InnoDB' Startup Options and System Variables
* using-innodb-tables::          Creating and Using `InnoDB' Tables
* innodb-data-log-reconfiguration::  Adding, Removing, or Resizing `InnoDB' Data and Log Files
* innodb-backup::                Backing Up and Recovering an `InnoDB' Database
* innodb-migration::             Moving or Copying `InnoDB' Tables to Another Machine
* innodb-transaction-model::     The `InnoDB' Transaction Model and Locking
* innodb-multi-versioning::      `InnoDB' Multi-Versioning
* innodb-table-and-index::       `InnoDB' Table and Index Structures
* innodb-disk-management::       Managing Disk I/O and File Space for `InnoDB' Tables
* innodb-error-handling::        `InnoDB' Error Handling
* innodb-tuning-troubleshooting::  `InnoDB' Performance Tuning and Troubleshooting
* innodb-restrictions::          Limits on `InnoDB' Tables

`InnoDB' is a high-reliability and high-performance storage engine for
MySQL. Starting with MySQL 5.5, it is the default MySQL storage engine.
Key advantages of InnoDB include:

   * Its design follows the ACID model, with transactions featuring
     commit, rollback, and crash-recovery capabilities to protect user
     data.

   * Row-level locking and Oracle-style consistent reads increase
     multi-user concurrency and performance.

   * `InnoDB' tables arrange your data on disk to optimize common
     queries based on primary keys. Each `InnoDB' table has a primary
     key index called the clustered index that organizes the data to
     minimize I/O for primary key lookups.

   * To maintain data integrity, `InnoDB' also supports `FOREIGN KEY'
     referential-integrity constraints.

   * You can freely mix `InnoDB' tables with tables from other MySQL
     storage engines, even within the same statement. For example, you
     can use a join operation to combine data from `InnoDB' and
     `MEMORY' tables in a single query.

To determine whether your server supports `InnoDB' use the *Note `SHOW
ENGINES': show-engines. statement. See *Note show-engines::.

*`InnoDB' Storage Engine Features*

*Storage limits* 64TB     *Transactions*   Yes      *Locking         Row
                                                    granularity*     
*MVCC*           Yes      *Geospatial      Yes      *Geospatial      No
                          data type                 indexing         
                          support*                  support*         
*B-tree indexes* Yes      *T-tree indexes* No       *Hash indexes*   No
                                                                     InnoDB
                                                                     utilizes
                                                                     hash
                                                                     indexes
                                                                     internally
                                                                     for its
                                                                     Adaptive
                                                                     Hash
                                                                     Index
                                                                     feature.
*Full-text       Yes      *Clustered       Yes      *Data caches*    Yes
search indexes*  InnoDB   indexes*                                   
                 support                                             
                 for                                                 
                 FULLTEXT                                            
                 indexes                                             
                 is                                                  
                 available                                           
                 in                                                  
                 MySQL                                               
                 5.6.4                                               
                 and                                                 
                 higher.                                             
*Index caches*   Yes      *Compressed      Yes      *Encrypted data  Yes
                          data*            CompressedImplemented in   
                                           InnoDB   the server (via  
                                           tables   encryption       
                                           require  functions),      
                                           the      rather than in   
                                           InnoDB   the storage      
                                           Barracudaengine.*         
                                           file                      
                                           format.                   
*Cluster         No       *Replication     Yes      *Foreign key     Yes
database                  support                   support*         
support*                  Implemented in                             
                          the server,                                
                          rather than in                             
                          the storage                                
                          engine.*                                   
*Backup /        Yes      *Query cache     Yes      *Update          Yes
point-in-time             support*                  statistics for   
recovery                                            data dictionary* 
Implemented in                                                       
the server,                                                          
rather than in                                                       
the storage                                                          
engine.*                                                             

`InnoDB' has been designed for maximum performance when processing
large data volumes. Its CPU efficiency is probably not matched by any
other disk-based relational database engine.

The `InnoDB' storage engine maintains its own buffer pool for caching
data and indexes in main memory.  `InnoDB' stores its tables and
indexes in a tablespace, which may consist of several files (or raw disk
partitions). This is different from, for example, `MyISAM' tables where
each table is stored using separate files. `InnoDB' tables can be very
large even on operating systems where file size is limited to 2GB.

`InnoDB' is published under the same GNU GPL License Version 2 (of June
1991) as MySQL. For more information on MySQL licensing, see
http://www.mysql.com/company/legal/licensing/.

* Additional Resources *

   * A forum dedicated to the `InnoDB' storage engine is available at
     `http://forums.mysql.com/list.php?22'.

   * The InnoDB storage engine in MySQL 5.5 releases includes a number
     performance improvements that in MySQL 5.1 were only available by
     installing the InnoDB Plugin. This latest InnoDB (now known as
     InnoDB 1.1) offers new features, improved performance and
     scalability, enhanced reliability and new capabilities for
     flexibility and ease of use. Among the top features are Fast Index
     Creation, table and index compression, file format management, new
     `INFORMATION_SCHEMA' tables, capacity tuning, multiple background
     I/O threads, multiple buffer pools, and group commit.

     For information about these features, see *Note innodb-5-5::.

   * The MySQL Enterprise Backup product lets you back up a running
     MySQL database, including `InnoDB' and `MyISAM' tables, with
     minimal disruption to operations while producing a consistent
     snapshot of the database. When MySQL Enterprise Backup is copying
     `InnoDB' tables, reads and writes to both `InnoDB' and `MyISAM'
     tables can continue. During the copying of `MyISAM' and other
     non-InnoDB tables, reads (but not writes) to those tables are
     permitted. In addition, MySQL Enterprise Backup can create
     compressed backup files, and back up subsets of `InnoDB' tables.
     In conjunction with the MySQL binary log, you can perform
     point-in-time recovery. MySQL Enterprise Backup is included as
     part of the MySQL Enterprise subscription.

     For a more complete description of MySQL Enterprise Backup, see
     MySQL Enterprise Backup User's Guide (Version 3.8.2)
     (http://dev.mysql.com/doc/mysql-enterprise-backup/3.8/en/index.html).


File: manual.info,  Node: innodb-default-se,  Next: innodb-configuration,  Prev: innodb-storage-engine,  Up: innodb-storage-engine

14.3.1 `InnoDB' as the Default MySQL Storage Engine
---------------------------------------------------

MySQL has a well-earned reputation for being easy-to-use and delivering
performance and scalability. In previous versions of MySQL, MyISAM was
the default storage engine. In our experience, most users never changed
the default settings. With MySQL 5.5, InnoDB becomes the default
storage engine. Again, we expect most users will not change the default
settings. But, because of InnoDB, the default settings deliver the
benefits users expect from their RDBMS: ACID Transactions, Referential
Integrity, and Crash Recovery.  Let's explore how using InnoDB tables
improves your life as a MySQL user, DBA, or developer.

* Trends in Storage Engine Usage *

In the first years of MySQL growth, early web-based applications didn't
push the limits of concurrency and availability. In 2010, hard drive
and memory capacity and the performance/price ratio have all gone
through the roof. Users pushing the performance boundaries of MySQL
care a lot about reliability and crash recovery. MySQL databases are
big, busy, robust, distributed, and important.

InnoDB hits the sweet spot of these top user priorities. The trend of
storage engine usage has shifted in favor of the more scalable InnoDB.
Thus MySQL 5.5 is the logical transition release to make InnoDB the
default storage engine.

* Consequences of InnoDB as Default MySQL Storage Engine *

Starting from MySQL 5.5.5, the default storage engine for new tables is
InnoDB. This change applies to newly created tables that don't specify
a storage engine with a clause such as `ENGINE=MyISAM'. (Given this
change of default behavior, MySQL 5.5 might be a logical point to
evaluate whether your tables that do use MyISAM could benefit from
switching to InnoDB.)

The `mysql' and `information_schema' databases, that implement some of
the MySQL internals, still use MyISAM. In particular, you cannot switch
the grant tables to use InnoDB.

* Benefits of InnoDB Tables *

If you use `MyISAM' tables but aren't tied to them for technical
reasons, you'll find many things more convenient when you use `InnoDB'
tables in MySQL 5.5:

   * If your server crashes because of a hardware or software issue,
     regardless of what was happening in the database at the time, you
     don't need to do anything special after restarting the database.
     InnoDB crash recovery automatically finalizes any changes that were
     committed before the time of the crash, and undoes any changes
     that were in process but not committed. Just restart and continue
     where you left off. This process is now much faster than in MySQL
     5.1 and earlier.

   * The InnoDB buffer pool caches table and index data as the data is
     accessed. Frequently used data is processed directly from memory.
     This cache applies to so many types of information, and speeds up
     processing so much, that dedicated database servers assign up to
     80% of their physical memory to the InnoDB buffer pool.

   * If you split up related data into different tables, you can set up
     foreign keys that enforce referential integrity. Update or delete
     data, and the related data in other tables is updated or deleted
     automatically. Try to insert data into a secondary table without
     corresponding data in the primary table, and the bad data gets
     kicked out automatically.

   * If data becomes corrupted on disk or in memory, a checksum
     mechanism alerts you to the bogus data before you use it.

   * When you design your database with appropriate primary key columns
     for each table, operations involving those columns are
     automatically optimized. It is very fast to reference the primary
     key columns in `WHERE' clauses, `ORDER BY' clauses, `GROUP BY'
     clauses, and join operations.

   * Inserts, updates, deletes are optimized by an automatic mechanism
     called change buffering. InnoDB not only allows concurrent read and
     write access to the same table, it caches changed data to
     streamline disk I/O.

   * Performance benefits are not limited to giant tables with
     long-running queries. When the same rows are accessed over and
     over from a table, a feature called the Adaptive Hash Index takes
     over to make these lookups even faster, as if they came out of a
     hash table.

* Best Practices for InnoDB Tables *

If you have been using `InnoDB' for a long time, you already know about
features like transactions and foreign keys.  If not, read about them
throughout this chapter. To make a long story short:

   * Specify a primary key for every table using the most frequently
     queried column or columns, or anauto-increment value if there is
     no obvious primary key.

   * Embrace the idea of joins, where data is pulled from multiple
     tables based on identical ID values from those tables. For fast
     join performance, define foreign keys on the join columns, and
     declare those columns with the same data type in each table. The
     foreign keys also propagate deletes or updates to all affected
     tables, and prevent insertion of data in a child table if the
     corresponding IDs are not present in the parent table.

   * Turn off autocommit.  Committing hundreds of times a second puts a
     cap on performance (limited by the write speed of your storage
     device).

   * Group sets of related DML operations into transactions, by
     bracketing them with `START TRANSACTION' and `COMMIT' statements.
     While you don't want to commit too often, you also don't want to
     issue huge batches of `INSERT', `UPDATE', or `DELETE' statements
     that run for hours without committing.

   * Stop using `LOCK TABLE' statements. InnoDB can handle multiple
     sessions all reading and writing to the same table at once,
     without sacrificing reliability or high performance. To get
     exclusive write access to a set of rows, use the `SELECT ... FOR
     UPDATE' syntax to lock just the rows you intend to update.

   * Enable the `innodb_file_per_table' option to put the data and
     indexes for individual tables into separate files, instead of in a
     single giant system tablespace.  (This setting is required to use
     some of the other features, such as table compression and fast
     truncation.)

   * Evaluate whether your data and access patterns benefit from the
     new InnoDB table compression feature (`ROW_FORMAT=COMPRESSED' on
     the `CREATE TABLE' statement. You can compress InnoDB tables
     without sacrificing read/write capability.

   * Run your server with the option
     `--sql_mode=NO_ENGINE_SUBSTITUTION' to prevent tables being
     created with a different storage engine if there is an issue with
     the one specified in the `ENGINE=' clause of `CREATE TABLE'.

* Recent Improvements for InnoDB Tables (from the Plugin Era) *

If you have experience with InnoDB, but not the recent incarnation
known as the InnoDB Plugin, read about the latest enhancements in *Note
innodb-5-5::. To make a long story short:

   * You can compress tables and associated indexes.

   * You can create and drop indexes with much less performance or
     availability impact than before.

   * Truncating a table is very fast, and can free up disk space for
     the operating system to reuse, rather than freeing up space within
     the system tablespace that only InnoDB could reuse.

   * The storage layout for table data is more efficient for BLOBs and
     long text fields.

   * You can monitor the internal workings of the storage engine by
     querying `INFORMATION_SCHEMA' tables.

   * You can monitor the performance details of the storage engine by
     querying `performance_schema' tables.

   * There are many many performance improvements. In particular, crash
     recovery, the automatic process that makes all data consistent
     when the database is restarted, is fast and reliable.  (Now much
     much faster than long-time InnoDB users are used to.)  The bigger
     the database, the more dramatic the speedup.

     Most new performance features are automatic, or at most require
     setting a value for a configuration option. For details, see *Note
     innodb-performance::. For InnoDB-specific tuning techniques you
     can apply in your application code, see *Note optimizing-innodb::.
     Advanced users can review *Note innodb-parameters::.

* Testing and Benchmarking with InnoDB as Default Storage Engine *

Even before completing your upgrade to MySQL 5.5, you can preview
whether your database server or application works correctly with InnoDB
as the default storage engine. To set up InnoDB as the default storage
engine with an earlier MySQL release, either specify on the command line
`--default-storage-engine=InnoDB', or add to your `my.cnf' file
`default-storage-engine=innodb' in the `[mysqld]' section, then restart
the server.

Since changing the default storage engine only affects new tables as
they are created, run all your application installation and setup steps
to confirm that everything installs properly. Then exercise all the
application features to make sure all the data loading, editing, and
querying features work. If a table relies on some MyISAM-specific
feature, you'll receive an error; add the `ENGINE=MyISAM' clause to the
`CREATE TABLE' statement to avoid the error. (For example, tables that
rely on full-text search must be MyISAM tables rather than InnoDB ones.)

If you did not make a deliberate decision about the storage engine, and
you just want to preview how certain tables work when they're created
under InnoDB, issue the command `ALTER TABLE table_name ENGINE=InnoDB;'
for each table. Or, to run test queries and other statements without
disturbing the original table, make a copy like so:

     CREATE TABLE InnoDB_Table (...) ENGINE=InnoDB AS SELECT * FROM MyISAM_Table;

Since there are so many performance enhancements in the InnoDB that is
part of MySQL 5.5, to get a true idea of the performance with a full
application under a realistic workload, install the real MySQL 5.5 and
run benchmarks.

Test the full application lifecycle, from installation, through heavy
usage, and server restart. Kill the server process while the database
is busy to simulate a power failure, and verify that the data is
recovered successfully when you restart the server.

Test any replication configurations, especially if you use different
MySQL versions and options on the master and the slaves.

* Verifying that InnoDB is the Default Storage Engine *

To know what the status of InnoDB is, whether you're doing what-if
testing with an older MySQL or comprehensive testing with MySQL 5.5:

   * Issue the command `SHOW VARIABLES LIKE 'have_innodb';' to confirm
     that InnoDB is available at all. If the result is `NO', you have a
     mysqld binary that was compiled without InnoDB support and you
     need to get a different one. If the result is `DISABLED', go back
     through your startup options and configuration file and get rid of
     any `skip-innodb' option.

   * Issue the command `SHOW ENGINES;' to see all the different MySQL
     storage engines. Look for `DEFAULT' in the InnoDB line.


File: manual.info,  Node: innodb-configuration,  Next: innodb-multiple-tablespaces,  Prev: innodb-default-se,  Up: innodb-storage-engine

14.3.2 Configuring `InnoDB'
---------------------------

The first decisions to make about InnoDB configuration involve how to
lay out InnoDB data files, and how much memory to allocate for the
InnoDB storage engine. You record these choices either by recording
them in a configuration file that MySQL reads at startup, or by
specifying them as command-line options in a startup script. The full
list of options, descriptions, and allowed parameter values is at *Note
innodb-parameters::.

* Overview of InnoDB Tablespace and Log Files *

Two important disk-based resources managed by the `InnoDB' storage
engine are its tablespace data files and its log files. If you specify
no `InnoDB' configuration options, MySQL creates an auto-extending data
file, slightly larger than 10MB, named `ibdata1' and two log files named
`ib_logfile0' and `ib_logfile1' in the MySQL data directory.  Their
size is given by the size of the `innodb_log_file_size' system
variable. To get good performance, explicitly provide `InnoDB'
parameters as discussed in the following examples. Naturally, edit the
settings to suit your hardware and requirements.

The examples shown here are representative. See *Note
innodb-parameters:: for additional information about `InnoDB'-related
configuration parameters.

* Considerations for Storage Devices *

In some cases, database performance improves if the data is not all
placed on the same physical disk. Putting log files on a different disk
from data is very often beneficial for performance.  The example
illustrates how to do this. It places the two data files on different
disks and places the log files on the third disk. `InnoDB' fills the
tablespace beginning with the first data file. You can also use raw
disk partitions (raw devices) as `InnoDB' data files, which may speed
up I/O. See *Note innodb-raw-devices::.

*Caution*:

`InnoDB' is a transaction-safe (ACID compliant) storage engine for
MySQL that has commit, rollback, and crash-recovery capabilities to
protect user data.  *However, it cannot do so* if the underlying
operating system or hardware does not work as advertised. Many
operating systems or disk subsystems may delay or reorder write
operations to improve performance. On some operating systems, the very
`fsync()' system call that should wait until all unwritten data for a
file has been flushed might actually return before the data has been
flushed to stable storage. Because of this, an operating system crash
or a power outage may destroy recently committed data, or in the worst
case, even corrupt the database because of write operations having been
reordered. If data integrity is important to you, perform some
`pull-the-plug' tests before using anything in production. On Mac OS X
10.3 and up, `InnoDB' uses a special `fcntl()' file flush method. Under
Linux, it is advisable to *disable the write-back cache*.

On ATA/SATA disk drives, a command such `hdparm -W0 /dev/hda' may work
to disable the write-back cache.  *Beware that some drives or disk
controllers may be unable to disable the write-back cache.*

*Caution*:

If reliability is a consideration for your data, do not configure
`InnoDB' to use data files or log files on NFS volumes. Potential
problems vary according to OS and version of NFS, and include such
issues as lack of protection from conflicting writes, and limitations
on maximum file sizes.

* Specifying the Location and Size for InnoDB Tablespace Files *

To set up the `InnoDB' tablespace files, use the
`innodb_data_file_path' option in the `[mysqld]' section of the
`my.cnf' option file. On Windows, you can use `my.ini' instead. The
value of `innodb_data_file_path' should be a list of one or more data
file specifications. If you name more than one data file, separate them
by semicolon (``;'') characters:

     innodb_data_file_path=DATAFILE_SPEC1[;DATAFILE_SPEC2]...

For example, the following setting explicitly creates a minimally sized
system tablespace:

     [mysqld]
     innodb_data_file_path=ibdata1:12M:autoextend

This setting configures a single data file, slightly larger than 10MB,
named `ibdata1' that is auto-extending.  No location for the file is
given, so by default, `InnoDB' creates it in the MySQL data directory.

Sizes are specified using `K', `M', or `G' suffix letters to indicate
units of KB, MB, or GB.

A tablespace containing a fixed-size 50MB data file named `ibdata1' and
a 50MB auto-extending file named `ibdata2' in the data directory can be
configured like this:

     [mysqld]
     innodb_data_file_path=ibdata1:50M;ibdata2:50M:autoextend

The full syntax for a data file specification includes the file name,
its size, and several optional attributes:

     FILE_NAME:FILE_SIZE[:autoextend[:max:MAX_FILE_SIZE]]

The `autoextend' and `max' attributes can be used only for the last
data file in the `innodb_data_file_path' line.

If you specify the `autoextend' option for the last data file, `InnoDB'
extends the data file if it runs out of free space in the tablespace.
The increment is 8MB at a time by default. To modify the increment,
change the `innodb_autoextend_increment' system variable.

If the disk becomes full, you might want to add another data file on
another disk. For tablespace reconfiguration instructions, see *Note
innodb-data-log-reconfiguration::.

`InnoDB' is not aware of the file system maximum file size, so be
cautious on file systems where the maximum file size is a small value
such as 2GB. To specify a maximum size for an auto-extending data file,
use the `max' attribute following the `autoextend' attribute.  Use the
`max' attribute only in cases where constraining disk usage is of
critical importance, because exceeding the maximum size causes a fatal
error, possibly including a crash. The following configuration permits
`ibdata1' to grow up to a limit of 500MB:

     [mysqld]
     innodb_data_file_path=ibdata1:12M:autoextend:max:500M

`InnoDB' creates tablespace files in the MySQL data directory by
default. To specify a location explicitly, use the
`innodb_data_home_dir' option.  For example, to use two files named
`ibdata1' and `ibdata2' but create them in the `/ibdata' directory,
configure `InnoDB' like this:

     [mysqld]
     innodb_data_home_dir = /ibdata
     innodb_data_file_path=ibdata1:50M;ibdata2:50M:autoextend

*Note*:

`InnoDB' does not create directories, so make sure that the `/ibdata'
directory exists before you start the server. This is also true of any
log file directories that you configure. Use the Unix or DOS `mkdir'
command to create any necessary directories.

Make sure that the MySQL server has the proper access rights to create
files in the data directory. More generally, the server must have
access rights in any directory where it needs to create data files or
log files.

`InnoDB' forms the directory path for each data file by textually
concatenating the value of `innodb_data_home_dir' to the data file
name, adding a path name separator (slash or backslash) between values
if necessary. If the `innodb_data_home_dir' option is not specified in
`my.cnf' at all, the default value is the `dot' directory `./', which
means the MySQL data directory. (The MySQL server changes its current
working directory to its data directory when it begins executing.)

If you specify `innodb_data_home_dir' as an empty string, you can
specify absolute paths for the data files listed in the
`innodb_data_file_path' value. The following example is equivalent to
the preceding one:

     [mysqld]
     innodb_data_home_dir =
     innodb_data_file_path=/ibdata/ibdata1:50M;/ibdata/ibdata2:50M:autoextend

* Specifying InnoDB Configuration Options *

*Sample `my.cnf' file for small systems.* Suppose that you have a
computer with 512MB RAM and one hard disk. The following example shows
possible configuration parameters in `my.cnf' or `my.ini' for `InnoDB',
including the `autoextend' attribute. The example suits most users,
both on Unix and Windows, who do not want to distribute `InnoDB' data
files and log files onto several disks. It creates an auto-extending
data file `ibdata1' and two `InnoDB' log files `ib_logfile0' and
`ib_logfile1' in the MySQL data directory.

     [mysqld]
     # You can write your other MySQL server options here
     # ...
     # Data files must be able to hold your data and indexes.
     # Make sure that you have enough free disk space.
     innodb_data_file_path = ibdata1:12M:autoextend
     #
     # Set buffer pool size to 50-80% of your computer's memory
     innodb_buffer_pool_size=256M
     innodb_additional_mem_pool_size=20M
     #
     # Set the log file size to about 25% of the buffer pool size
     innodb_log_file_size=64M
     innodb_log_buffer_size=8M
     #
     innodb_flush_log_at_trx_commit=1

Note that data files must be less than 2GB in some file systems.  The
combined size of the log files must be less than 4GB. The combined size
of data files must be at least slightly larger than 10MB.

* Setting Up the InnoDB System Tablespace *

When you create an `InnoDB' system tablespace for the first time, it is
best that you start the MySQL server from the command prompt. `InnoDB'
then prints the information about the database creation to the screen,
so you can see what is happening. For example, on Windows, if *Note
`mysqld': mysqld. is located in `C:\Program Files\MySQL\MySQL Server
5.5\bin', you can start it like this:

     C:\> "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld" --console

If you do not send server output to the screen, check the server's
error log to see what `InnoDB' prints during the startup process.

For an example of what the information displayed by `InnoDB' should
look like, see *Note innodb-init::.

* Editing the MySQL Configuration File *

You can place `InnoDB' options in the `[mysqld]' group of any option
file that your server reads when it starts. The locations for option
files are described in *Note option-files::.

If you installed MySQL on Windows using the installation and
configuration wizards, the option file will be the `my.ini' file
located in your MySQL installation directory. See *Note
mysql-installer::.

If your PC uses a boot loader where the `C:' drive is not the boot
drive, your only option is to use the `my.ini' file in your Windows
directory (typically `C:\WINDOWS'). You can use the `SET' command at
the command prompt in a console window to print the value of `WINDIR':

     C:\> SET WINDIR
     windir=C:\WINDOWS

To make sure that *Note `mysqld': mysqld. reads options only from a
specific file, use the `--defaults-file' option as the first option on
the command line when starting the server:

     mysqld --defaults-file=YOUR_PATH_TO_MY_CNF

*Sample `my.cnf' file for large systems.* Suppose that you have a Linux
computer with 2GB RAM and three 60GB hard disks at directory paths `/',
`/dr2' and `/dr3'. The following example shows possible configuration
parameters in `my.cnf' for `InnoDB'.

     [mysqld]
     # You can write your other MySQL server options here
     # ...
     innodb_data_home_dir =
     #
     # Data files must be able to hold your data and indexes
     innodb_data_file_path = /db/ibdata1:2000M;/dr2/db/ibdata2:2000M:autoextend
     #
     # Set buffer pool size to 50-80% of your computer's memory,
     # but make sure on Linux x86 total memory usage is < 2GB
     innodb_buffer_pool_size=1G
     innodb_additional_mem_pool_size=20M
     innodb_log_group_home_dir = /dr3/iblogs
     #
     # Set the log file size to about 25% of the buffer pool size
     innodb_log_file_size=250M
     innodb_log_buffer_size=8M
     #
     innodb_flush_log_at_trx_commit=1
     innodb_lock_wait_timeout=50
     #
     # Uncomment the next line if you want to use it
     #innodb_thread_concurrency=5

* Determining the Maximum Memory Allocation for InnoDB *

*Warning*:

On 32-bit GNU/Linux x86, be careful not to set memory usage too high.
`glibc' may permit the process heap to grow over thread stacks, which
crashes your server. It is a risk if the value of the following
expression is close to or exceeds 2GB:

     innodb_buffer_pool_size
     + key_buffer_size
     + max_connections*(sort_buffer_size+read_buffer_size+binlog_cache_size)
     + max_connections*2MB

Each thread uses a stack (often 2MB, but only 256KB in MySQL binaries
provided by Oracle Corporation.) and in the worst case also uses
`sort_buffer_size + read_buffer_size' additional memory.

*Tuning other *Note `mysqld': mysqld.  server parameters.* The
following values are typical and suit most users:

     [mysqld]
     skip-external-locking
     max_connections=200
     read_buffer_size=1M
     sort_buffer_size=1M
     #
     # Set key_buffer to 5 - 50% of your RAM depending on how much
     # you use MyISAM tables, but keep key_buffer_size + InnoDB
     # buffer pool size < 80% of your RAM
     key_buffer_size=VALUE

On Linux, if the kernel is enabled for large page support, `InnoDB' can
use large pages to allocate memory for its buffer pool and additional
memory pool. See *Note large-page-support::.

* Turning Off InnoDB *

Oracle recommends InnoDB as the preferred storage engine for typical
database applications, from single-user wikis and blogs running on a
local system, to high-end applications pushing the limits of
performance. In MySQL 5.5, InnoDB is is the default storage engine for
new tables.

If you do not want to use `InnoDB' tables, start the server with the
`--innodb=OFF' or `--skip-innodb' option to disable the `InnoDB'
storage engine. In this case, because the default storage engine is
`InnoDB', the server will not start unless you also use
`--default-storage-engine' to set the default to some other engine.


File: manual.info,  Node: innodb-multiple-tablespaces,  Next: innodb-parameters,  Prev: innodb-configuration,  Up: innodb-storage-engine

14.3.3 Using Per-Table Tablespaces
----------------------------------

* Menu:

* innodb-raw-devices::           Using Raw Disk Partitions for the Shared Tablespace
* innodb-init::                  Creating the `InnoDB' Tablespace
* error-creating-innodb::        Troubleshooting `InnoDB' I/O Problems

By default, all InnoDB tables and indexes are stored in the system
tablespace.  As an alternative, you can store each `InnoDB' table and
its indexes in its own file. This feature is called `multiple
tablespaces' because each table that is created when this setting is in
effect has its own tablespace.

* Advantages of Per-Table Tablespaces *

   * You can reclaim disk space when truncating or dropping a table.
     For tables created when file-per-table mode is turned off,
     truncating or dropping them creates free space internally in the
     ibdata files.  That free space can only be used for new `InnoDB'
     data.

   * The *Note `TRUNCATE TABLE': truncate-table. operation is faster
     when run on individual `.ibd' files.

   * You can store specific tables on separate storage devices, for I/O
     optimization, space management, or backup purposes.

   * You can run *Note `OPTIMIZE TABLE': optimize-table. to compact or
     recreate a tablespace. When you run an *Note `OPTIMIZE TABLE':
     optimize-table, `InnoDB' will create a new `.ibd' file with a
     temporary name, using only the space required to store actual
     data. When the optimization is complete, `InnoDB' removes the old
     `.ibd' file and replaces it with the new `.ibd' file. If the
     previous `.ibd' file had grown significantly but actual data only
     accounted for a portion of its size, running *Note `OPTIMIZE
     TABLE': optimize-table. allows you to reclaim the unused space.

   * You can move individual `InnoDB' tables rather than entire
     databases.

   * You can enable compression for table and index data, using the
     compressed row format.

   * You can enable more efficient storage for tables with large BLOB
     or text columns using the dynamic row format.

   * Using `innodb_file_per_table' may improve chances for a successful
     recovery and save time if a corruption occurs, a server cannot be
     restarted, or backup and binary logs are unavailable.

   * You can back up or restore a single table quickly, without
     interrupting the use of other `InnoDB' tables, using the MySQL
     Enterprise Backup product. See Backing Up and Restoring a Single
     `.ibd' File
     (http://dev.mysql.com/doc/mysql-enterprise-backup/3.8/en/partial.restoring.single.html)
     for the procedure and restrictions.

   * File-per-table mode allows you to excluded tables from a backup.
     This is beneficial if you have tables that require backup less
     frequently or on a different schedule.

   * File-per-table mode is convenient for per-table status reporting
     when copying or backing up tables.

   * File-per-table mode allows you to monitor table size at a file
     system level, without accessing MySQL.

   * Common Linux file systems do not permit concurrent writes to a
     single file when `innodb_flush_method' is set to `O_DIRECT'. As a
     result, there are possible performance improvements when using
     `innodb_file_per_table' in conjunction with `innodb_flush_method'.

   * If `innodb_file_per_table' is disabled, there is one shared
     tablespace (the system tablespace) for tables, the data
     dictionary, and undo logs.  This single tablespace has a 64TB size
     limit. If `innodb_file_per_table' is enabled, each table has its
     own tablespace, each with a 64TB size limit. See *Note
     table-size-limit:: for related information.

* Potential Disadvantages of Per-Table Tablespaces *

   * With `innodb_file_per_table', each table may have unused table
     space, which can only be utilized by rows of the same table. This
     could lead to more rather than less wasted table space if not
     properly managed.

   * `fsync' operations must run on each open table rather than on a
     single file. Because there is a separate `fsync' operation for
     each file, write operations on multiple tables cannot be combined
     into a single I/O operation. This may require `InnoDB' to perform
     a higher total number of `fsync' operations.

   * *Note `mysqld': mysqld. must keep 1 open file handle per table,
     which may impact performance if you have numerous tables.

   * More file descriptors are used.

   * If backward compatibility with MySQL 5.1 is a concern, be aware
     that enabling `innodb_file_per_table' means that *Note `ALTER
     TABLE': alter-table. will move `InnoDB' tables from the system
     tablespace to individual `.ibd' files.

   * If many tables are growing there is potential for more
     fragmentation which can impede *Note `DROP TABLE': drop-table. and
     table scan performance. However, when fragmentation is managed,
     having files in their own tablespace can improve performance.

   * The buffer pool is scanned when dropping a per-table tablespace,
     which can take several seconds for buffer pools that are tens of
     gigabytes in size. The scan is performed with a broad internal
     lock, which may delay other operations.  Tables in the shared
     tablespace are not affected.

   * The `innodb_autoextend_increment' variable, which defines
     increment size (in MB) for extending the size of an auto-extending
     shared tablespace file when it becomes full, does not apply to
     per-table tablespace files.  Per-table tablespace files are
     auto-extending regardless of the value of
     `innodb_autoextend_increment'.  The initial extensions are by
     small amounts, after which extensions occur in increments of 4MB.

* Enabling and Disabling Multiple Tablespaces *

To enable multiple tablespaces, start the server with the
`--innodb_file_per_table' option. For example, add a line to the
`[mysqld]' section of `my.cnf':

     [mysqld]
     innodb_file_per_table

With multiple tablespaces enabled, `InnoDB' stores each newly created
table in its own `TBL_NAME.ibd' file in the appropriate database
directory. Unlike the `MyISAM' storage engine, with its separate
`TBL_NAME.MYD' and `TBL_NAME.MYI' files for indexes and data, `InnoDB'
stores the data and the indexes together in a single `.ibd' file. The
`TBL_NAME.frm' file is still created as usual.

If you remove the `innodb_file_per_table' line from `my.cnf' and
restart the server, `InnoDB' creates any new tables inside the shared
tablespace files.

You can always access both tables in the system tablespace and tables
in their own tablespaces, regardless of the file-per-table setting. To
move a table from the system tablespace to its own tablespace, or vice
versa, you can change the `innodb_file_per_table' setting and issue the
command:

     -- Move table from system tablespace to its own tablespace.
     SET GLOBAL innodb_file_per_table=1;
     ALTER TABLE TABLE_NAME ENGINE=InnoDB;
     -- Move table from its own tablespace to system tablespace.
     SET GLOBAL innodb_file_per_table=0;
     ALTER TABLE TABLE_NAME ENGINE=InnoDB;

*Note*:

`InnoDB' always needs the shared tablespace because it puts its
internal data dictionary and undo logs there. The `.ibd' files are not
sufficient for `InnoDB' to operate.

When a table is moved out of the system tablespace into its own `.ibd'
file, the data files that make up the system tablespace remain the same
size. The space formerly occupied by the table can be reused for new
`InnoDB' data, but is not reclaimed for use by the operating system.
When moving large `InnoDB' tables out of the system tablespace, where
disk space is limited, you might prefer to turn on
`innodb_file_per_table' and then recreate the entire instance using the
*Note `mysqldump': mysqldump. command.

* Portability Considerations for .ibd Files *

You cannot freely move `.ibd' files between database directories as you
can with `MyISAM' table files. The table definition stored in the
`InnoDB' shared tablespace includes the database name. The transaction
IDs and log sequence numbers stored in the tablespace files also differ
between databases.

To move an `.ibd' file and the associated table from one database to
another, use a *Note `RENAME TABLE': rename-table. statement:

     RENAME TABLE DB1.TBL_NAME TO DB2.TBL_NAME;

If you have a `clean' backup of an `.ibd' file, you can restore it to
the MySQL installation from which it originated as follows:

  1. The table must not have been dropped or truncated since you copied
     the `.ibd' file, because doing so changes the table ID stored
     inside the tablespace.

  2. Issue this *Note `ALTER TABLE': alter-table.  statement to delete
     the current `.ibd' file:

          ALTER TABLE TBL_NAME DISCARD TABLESPACE;

  3. Copy the backup `.ibd' file to the proper database directory.

  4. Issue this *Note `ALTER TABLE': alter-table.  statement to tell
     `InnoDB' to use the new `.ibd' file for the table:

          ALTER TABLE TBL_NAME IMPORT TABLESPACE;

In this context, a `clean' `.ibd' file backup is one for which the
following requirements are satisfied:

   * There are no uncommitted modifications by transactions in the
     `.ibd' file.

   * There are no unmerged insert buffer entries in the `.ibd' file.

   * Purge has removed all delete-marked index records from the `.ibd'
     file.

   * *Note `mysqld': mysqld. has flushed all modified pages of the
     `.ibd' file from the buffer pool to the file.

You can make a clean backup `.ibd' file using the following method:

  1. Stop all activity from the *Note `mysqld': mysqld. server and
     commit all transactions.

  2. Wait until *Note `SHOW ENGINE INNODB STATUS': show-engine. shows
     that there are no active transactions in the database, and the
     main thread status of `InnoDB' is `Waiting for server activity'.
     Then you can make a copy of the `.ibd' file.

Another method for making a clean copy of an `.ibd' file is to use the
MySQL Enterprise Backup product:

  1. Use MySQL Enterprise Backup to back up the `InnoDB' installation.

  2. Start a second *Note `mysqld': mysqld. server on the backup and
     let it clean up the `.ibd' files in the backup.


File: manual.info,  Node: innodb-raw-devices,  Next: innodb-init,  Prev: innodb-multiple-tablespaces,  Up: innodb-multiple-tablespaces

14.3.3.1 Using Raw Disk Partitions for the Shared Tablespace
............................................................

You can use raw disk partitions as data files in the `InnoDB' system
tablespace.  This technique enables nonbuffered I/O on Windows and on
some Linux and Unix systems without file system overhead. Perform tests
with and without raw partitions to verify whether this change actually
improves performance on your system.

When you create a new data file, put the keyword `newraw' immediately
after the data file size in `innodb_data_file_path'. The partition must
be at least as large as the size that you specify.  Note that 1MB in
`InnoDB' is 1024 x 1024 bytes, whereas 1MB in disk specifications
usually means 1,000,000 bytes.

     [mysqld]
     innodb_data_home_dir=
     innodb_data_file_path=/dev/hdd1:3Gnewraw;/dev/hdd2:2Gnewraw

The next time you start the server, `InnoDB' notices the `newraw'
keyword and initializes the new partition. However, do not create or
change any `InnoDB' tables yet. Otherwise, when you next restart the
server, `InnoDB' reinitializes the partition and your changes are lost.
(As a safety measure `InnoDB' prevents users from modifying data when
any partition with `newraw' is specified.)

After `InnoDB' has initialized the new partition, stop the server,
change `newraw' in the data file specification to `raw':

     [mysqld]
     innodb_data_home_dir=
     innodb_data_file_path=/dev/hdd1:3Graw;/dev/hdd2:2Graw

Then restart the server and `InnoDB' permits changes to be made.

On Windows, you can allocate a disk partition as a data file like this:

     [mysqld]
     innodb_data_home_dir=
     innodb_data_file_path=//./D::10Gnewraw

The `//./' corresponds to the Windows syntax of `\\.\' for accessing
physical drives.

When you use a raw disk partition, ensure that the user ID that runs
the MySQL server has read and write privileges for that partition.  For
example, if you run the server as the `mysql' user, the partition must
be readable and writeable by `mysql'. If you run the server with the
`--memlock' option, the server must be run as `root', so the partition
must be readable and writeable by `root'.


File: manual.info,  Node: innodb-init,  Next: error-creating-innodb,  Prev: innodb-raw-devices,  Up: innodb-multiple-tablespaces

14.3.3.2 Creating the `InnoDB' Tablespace
.........................................

Suppose that you have installed MySQL and have edited your option file
so that it contains the necessary `InnoDB' configuration parameters.
Before starting MySQL, verify that the directories you have specified
for `InnoDB' data files and log files exist and that the MySQL server
has access rights to those directories. `InnoDB' does not create
directories, only files. Check also that you have enough disk space for
the data and log files.

It is best to run the MySQL server *Note `mysqld': mysqld. from the
command prompt when you first start the server with `InnoDB' enabled,
not from *Note `mysqld_safe': mysqld-safe. or as a Windows service.
When you run from a command prompt you see what *Note `mysqld': mysqld.
prints and what is happening. On Unix, just invoke *Note `mysqld':
mysqld. On Windows, start *Note `mysqld': mysqld. with the `--console'
option to direct the output to the console window.

When you start the MySQL server after initially configuring `InnoDB' in
your option file, `InnoDB' creates your data files and log files, and
prints something like this:

     InnoDB: The first specified datafile /home/heikki/data/ibdata1
     did not exist:
     InnoDB: a new database to be created!
     InnoDB: Setting file /home/heikki/data/ibdata1 size to 134217728
     InnoDB: Database physically writes the file full: wait...
     InnoDB: datafile /home/heikki/data/ibdata2 did not exist:
     new to be created
     InnoDB: Setting file /home/heikki/data/ibdata2 size to 262144000
     InnoDB: Database physically writes the file full: wait...
     InnoDB: Log file /home/heikki/data/logs/ib_logfile0 did not exist:
     new to be created
     InnoDB: Setting log file /home/heikki/data/logs/ib_logfile0 size
     to 5242880
     InnoDB: Log file /home/heikki/data/logs/ib_logfile1 did not exist:
     new to be created
     InnoDB: Setting log file /home/heikki/data/logs/ib_logfile1 size
     to 5242880
     InnoDB: Doublewrite buffer not found: creating new
     InnoDB: Doublewrite buffer created
     InnoDB: Creating foreign key constraint system tables
     InnoDB: Foreign key constraint system tables created
     InnoDB: Started
     mysqld: ready for connections

At this point `InnoDB' has initialized its tablespace and log files.
You can connect to the MySQL server with the usual MySQL client
programs like *Note `mysql': mysql. When you shut down the MySQL server
with *Note `mysqladmin shutdown': mysqladmin, the output is like this:

     010321 18:33:34  mysqld: Normal shutdown
     010321 18:33:34  mysqld: Shutdown Complete
     InnoDB: Starting shutdown...
     InnoDB: Shutdown completed

You can look at the data file and log directories and you see the files
created there. When MySQL is started again, the data files and log
files have been created already, so the output is much briefer:

     InnoDB: Started
     mysqld: ready for connections

If you add the `innodb_file_per_table' option to `my.cnf', `InnoDB'
stores each table in its own `.ibd' file, in the same MySQL database
directory where the `.frm' file is created. See *Note
innodb-multiple-tablespaces::.


File: manual.info,  Node: error-creating-innodb,  Prev: innodb-init,  Up: innodb-multiple-tablespaces

14.3.3.3 Troubleshooting `InnoDB' I/O Problems
..............................................

The troubleshooting steps for `InnoDB' I/O problems depend on when the
problem occurs: during startup of the MySQL server, or during normal
operations when a DML or DDL statement fails due to problems at the
file system level.

* Initialization Problems *

If something goes wrong when `InnoDB' attempts to initialize its
tablespace or its log files, delete all files created by `InnoDB': all
`ibdata' files and all `ib_logfile' files. If you already created some
`InnoDB' tables, also delete the corresponding `.frm' files for these
tables, and any `.ibd' files if you are using multiple tablespaces,
from the MySQL database directories. Then try the `InnoDB' database
creation again. For easiest troubleshooting, start the MySQL server
from a command prompt so that you see what is happening.

* Runtime Problems *

If `InnoDB' prints an operating system error during a file operation,
usually the problem has one of the following solutions:

   * Make sure the `InnoDB' data file directory and the `InnoDB' log
     directory exist.

   * Make sure *Note `mysqld': mysqld. has access rights to create
     files in those directories.

   * Make sure *Note `mysqld': mysqld. can read the proper `my.cnf' or
     `my.ini' option file, so that it starts with the options that you
     specified.

   * Make sure the disk is not full and you are not exceeding any disk
     quota.

   * Make sure that the names you specify for subdirectories and data
     files do not clash.

   * Doublecheck the syntax of the `innodb_data_home_dir' and
     `innodb_data_file_path' values. In particular, any `MAX' value in
     the `innodb_data_file_path' option is a hard limit, and exceeding
     that limit causes a fatal error.


File: manual.info,  Node: innodb-parameters,  Next: using-innodb-tables,  Prev: innodb-multiple-tablespaces,  Up: innodb-storage-engine

14.3.4 `InnoDB' Startup Options and System Variables
----------------------------------------------------

This section describes the `InnoDB'-related command options and system
variables. System variables that are true or false can be enabled at
server startup by naming them, or disabled by using a `--skip-' prefix.
For example, to enable or disable `InnoDB' checksums, you can use
`--innodb_checksums' or `--skip-innodb_checksums' on the command line,
or `innodb_checksums' or `skip-innodb_checksums' in an option file.
System variables that take a numeric value can be specified as
`--VAR_NAME=VALUE' on the command line or as `VAR_NAME=VALUE' in option
files. For more information on specifying options and system variables,
see *Note program-options::. Many of the system variables can be
changed at runtime (see *Note dynamic-system-variables::).

Certain options control the locations and layout of the `InnoDB' data
files.  *Note innodb-configuration:: explains how to use these options.
Many other options, that you might not use initially, help to tune
`InnoDB' performance characteristics based on machine capacity and your
database workload. The performance-related options are explained in
*Note innodb-tuning-troubleshooting:: and *Note innodb-performance::.

*`InnoDB' Option/Variable Reference*

Name           Cmd-Line    Option file System Var  Status Var  Var Scope   Dynamic
foreign_key_checks                        Yes                     Both        Yes
have_innodb                            Yes                     Global      No
ignore-builtin-innodbYes         Yes                                 Global      No
- _Variable_:                          Yes                     Global      No
ignore_builtin_innodb                                                            
innodb         Yes         Yes                                             
innodb_adaptive_flushingYes         Yes         Yes                     Global      Yes
innodb_adaptive_hash_indexYes         Yes         Yes                     Global      Yes
innodb_additional_mem_pool_sizeYes         Yes         Yes                     Global      No
innodb_autoextend_incrementYes         Yes         Yes                     Global      Yes
innodb_autoinc_lock_modeYes         Yes         Yes                     Global      No
Innodb_buffer_pool_bytes_data                                    Yes         Global      No
Innodb_buffer_pool_bytes_dirty                                    Yes         Global      No
innodb_buffer_pool_instancesYes         Yes         Yes                     Global      No
Innodb_buffer_pool_pages_data                                    Yes         Global      No
Innodb_buffer_pool_pages_dirty                                    Yes         Global      No
Innodb_buffer_pool_pages_flushed                                    Yes         Global      No
Innodb_buffer_pool_pages_free                                    Yes         Global      No
Innodb_buffer_pool_pages_latched                                    Yes         Global      No
Innodb_buffer_pool_pages_misc                                    Yes         Global      No
Innodb_buffer_pool_pages_total                                    Yes         Global      No
Innodb_buffer_pool_read_ahead                                    Yes         Global      No
Innodb_buffer_pool_read_ahead_evicted                                    Yes         Global      No
Innodb_buffer_pool_read_requests                                    Yes         Global      No
Innodb_buffer_pool_reads                                    Yes         Global      No
innodb_buffer_pool_sizeYes         Yes         Yes                     Global      No
Innodb_buffer_pool_wait_free                                    Yes         Global      No
Innodb_buffer_pool_write_requests                                    Yes         Global      No
innodb_change_bufferingYes         Yes         Yes                     Global      Yes
innodb_checksumsYes         Yes         Yes                     Global      No
innodb_commit_concurrencyYes         Yes         Yes                     Global      Yes
innodb_concurrency_ticketsYes         Yes         Yes                     Global      Yes
innodb_data_file_pathYes         Yes         Yes                     Global      No
Innodb_data_fsyncs                                    Yes         Global      No
innodb_data_home_dirYes         Yes         Yes                     Global      No
Innodb_data_pending_fsyncs                                    Yes         Global      No
Innodb_data_pending_reads                                    Yes         Global      No
Innodb_data_pending_writes                                    Yes         Global      No
Innodb_data_read                                    Yes         Global      No
Innodb_data_reads                                    Yes         Global      No
Innodb_data_writes                                    Yes         Global      No
Innodb_data_written                                    Yes         Global      No
Innodb_dblwr_pages_written                                    Yes         Global      No
Innodb_dblwr_writes                                    Yes         Global      No
innodb_doublewriteYes         Yes         Yes                     Global      No
innodb_fast_shutdownYes         Yes         Yes                     Global      Yes
innodb_file_formatYes         Yes         Yes                     Global      Yes
innodb_file_format_checkYes         Yes         Yes                     Global      No
innodb_file_format_maxYes         Yes         Yes                     Global      Yes
innodb_file_per_tableYes         Yes         Yes                     Global      Yes
innodb_flush_log_at_trx_commitYes         Yes         Yes                     Global      Yes
innodb_flush_methodYes         Yes         Yes                     Global      No
innodb_force_load_corruptedYes         Yes         Yes                     Global      No
innodb_force_recoveryYes         Yes         Yes                     Global      No
Innodb_have_atomic_builtins                                    Yes         Global      No
innodb_io_capacityYes         Yes         Yes                     Global      Yes
innodb_large_prefixYes         Yes         Yes                     Global      Yes
innodb_lock_wait_timeoutYes         Yes         Yes                     Both        Yes
innodb_locks_unsafe_for_binlogYes         Yes         Yes                     Global      No
innodb_log_buffer_sizeYes         Yes         Yes                     Global      No
innodb_log_file_sizeYes         Yes         Yes                     Global      No
innodb_log_files_in_groupYes         Yes         Yes                     Global      No
innodb_log_group_home_dirYes         Yes         Yes                     Global      No
Innodb_log_waits                                    Yes         Global      No
Innodb_log_write_requests                                    Yes         Global      No
Innodb_log_writes                                    Yes         Global      No
innodb_max_dirty_pages_pctYes         Yes         Yes                     Global      Yes
innodb_max_purge_lagYes         Yes         Yes                     Global      Yes
innodb_mirrored_log_groupsYes         Yes         Yes                     Global      No
innodb_old_blocks_pctYes         Yes         Yes                     Global      Yes
innodb_old_blocks_timeYes         Yes         Yes                     Global      Yes
innodb_open_filesYes         Yes         Yes                     Global      No
Innodb_os_log_fsyncs                                    Yes         Global      No
Innodb_os_log_pending_fsyncs                                    Yes         Global      No
Innodb_os_log_pending_writes                                    Yes         Global      No
Innodb_os_log_written                                    Yes         Global      No
Innodb_page_size                                    Yes         Global      No
Innodb_pages_created                                    Yes         Global      No
Innodb_pages_read                                    Yes         Global      No
Innodb_pages_written                                    Yes         Global      No
innodb_print_all_deadlocksYes         Yes         Yes                     Global      Yes
innodb_purge_batch_sizeYes         Yes         Yes                     Global      Yes
innodb_purge_threadsYes         Yes         Yes                     Global      No
innodb_random_read_aheadYes         Yes         Yes                     Global      Yes
innodb_read_ahead_thresholdYes         Yes         Yes                     Global      Yes
innodb_read_io_threadsYes         Yes         Yes                     Global      No
innodb_replication_delayYes         Yes         Yes                     Global      Yes
innodb_rollback_on_timeoutYes         Yes         Yes                     Global      No
innodb_rollback_segmentsYes         Yes         Yes                     Global      Yes
Innodb_row_lock_current_waits                                    Yes         Global      No
Innodb_row_lock_time                                    Yes         Global      No
Innodb_row_lock_time_avg                                    Yes         Global      No
Innodb_row_lock_time_max                                    Yes         Global      No
Innodb_row_lock_waits                                    Yes         Global      No
Innodb_rows_deleted                                    Yes         Global      No
Innodb_rows_inserted                                    Yes         Global      No
Innodb_rows_read                                    Yes         Global      No
Innodb_rows_updated                                    Yes         Global      No
innodb_spin_wait_delayYes         Yes         Yes                     Global      Yes
innodb_stats_methodYes         Yes         Yes                     Global      Yes
innodb_stats_on_metadataYes         Yes         Yes                     Global      Yes
innodb_stats_sample_pagesYes         Yes         Yes                     Global      Yes
innodb-status-fileYes         Yes                                             
innodb_strict_modeYes         Yes         Yes                     Both        Yes
innodb_support_xaYes         Yes         Yes                     Both        Yes
innodb_sync_spin_loopsYes         Yes         Yes                     Global      Yes
innodb_table_locksYes         Yes         Yes                     Both        Yes
innodb_thread_concurrencyYes         Yes         Yes                     Global      Yes
innodb_thread_sleep_delayYes         Yes         Yes                     Global      Yes
Innodb_truncated_status_writes                                    Yes         Global      No
innodb_use_native_aioYes         Yes         Yes                     Global      No
innodb_use_sys_mallocYes         Yes         Yes                     Global      No
innodb_version                         Yes                     Global      No
innodb_write_io_threadsYes         Yes         Yes                     Global      No
timed_mutexes  Yes         Yes         Yes                     Global      Yes
unique_checks                          Yes                     Both        Yes

* `InnoDB' Command Options *

   *  `--ignore-builtin-innodb'

     Options for ignore-builtin-innodb

     *Deprecated*         5.2.22          
     *Command-Line        `--ignore-builtin-innodb'        
     Format*                              
     *Option-File Format* `ignore-builtin-innodb'        
     *System Variable     `ignore_builtin_innodb'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        

     In MySQL 5.1, this option caused the server to behave as if the
     built-in `InnoDB' were not present, which enabled `InnoDB Plugin'
     to be used instead.  In MySQL 5.5, `InnoDB' is the default storage
     engine and `InnoDB Plugin' is not used, so this option has no
     effect. As of MySQL 5.5.22, it is deprecated and its use results
     in a warning.

   *  `--innodb[=VALUE]'

     Controls loading of the `InnoDB' storage engine, if the server was
     compiled with `InnoDB' support. This option has a tristate format,
     with possible values of `OFF', `ON', or `FORCE'. See *Note
     server-plugin-loading::.

     To disable `InnoDB', use `--innodb=OFF' or `--skip-innodb'.  In
     this case, because the default storage engine is *Note `InnoDB':
     innodb-storage-engine, the server will not start unless you also
     use `--default-storage-engine' to set the default to some other
     engine.

   *  `--innodb-status-file'

     Options for innodb-status-file

     *Command-Line        `--innodb-status-file'        
     Format*                              
     *Option-File Format* `innodb-status-file'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Controls whether `InnoDB' creates a file named
     `innodb_status.<PID>' in the MySQL data directory. If enabled,
     `InnoDB' periodically writes the output of *Note `SHOW ENGINE
     INNODB STATUS': show-engine. to this file.

     By default, the file is not created. To create it, start *Note
     `mysqld': mysqld. with the `--innodb-status-file=1' option.  The
     file is deleted during normal shutdown.

   * `--skip-innodb'

     Disable the `InnoDB' storage engine. See the description of
     `--innodb'.

* `InnoDB' System Variables *

   *  `ignore_builtin_innodb'

     Options for ignore-builtin-innodb

     *Deprecated*         5.2.22          
     *Command-Line        `--ignore-builtin-innodb'        
     Format*                              
     *Option-File Format* `ignore-builtin-innodb'        
     *System Variable     `ignore_builtin_innodb'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        

     See the description of `--ignore-builtin-innodb' under ``InnoDB'
     Command Options' earlier in this section.

   *  `innodb_adaptive_flushing'

     Options for innodb_adaptive_flushing

     *Command-Line        `--innodb_adaptive_flushing=#'        
     Format*                              
     *Option-File Format* `innodb_adaptive_flushing'        
     *System Variable     `innodb_adaptive_flushing'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            

     Specifies whether to dynamically adjust the rate of flushing dirty
     pages in the `InnoDB' buffer pool based on the workload. Adjusting
     the flush rate dynamically is intended to avoid bursts of I/O
     activity. This setting is enabled by default.

   *  `innodb_adaptive_hash_index'

     Options for innodb_adaptive_hash_index

     *Command-Line        `--innodb_adaptive_hash_index=#'        
     Format*                              
     *Option-File Format* `innodb_adaptive_hash_index'        
     *System Variable     `innodb_adaptive_hash_index'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            

     Whether the `InnoDB' adaptive hash index is enabled or disabled.
     The adaptive hash index feature is useful for some workloads, and
     not for others; conduct benchmarks with it both enabled and
     disabled, using realistic workloads. See *Note
     innodb-adaptive-hash:: for details. This variable is enabled by
     default. Use `--skip-innodb_adaptive_hash_index' at server startup
     to disable it.

   *  `innodb_additional_mem_pool_size'

     Options for innodb_additional_mem_pool_size

     *Command-Line        `--innodb_additional_mem_pool_size=#'        
     Format*                              
     *Option-File Format* `innodb_additional_mem_pool_size'        
     *System Variable     `innodb_additional_mem_pool_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `8388608'        
     *Range*              `2097152        
                          ..              
                          4294967295'        

     The size in bytes of a memory pool `InnoDB' uses to store data
     dictionary information and other internal data structures. The
     more tables you have in your application, the more memory you need
     to allocate here. If `InnoDB' runs out of memory in this pool, it
     starts to allocate memory from the operating system and writes
     warning messages to the MySQL error log. The default value is 8MB.

     This variable relates to the `InnoDB' internal memory allocator,
     which is unused if `innodb_use_sys_malloc' is enabled.

   *  `innodb_autoextend_increment'

     Options for innodb_autoextend_increment

     *Command-Line        `--innodb_autoextend_increment=#'        
     Format*                              
     *Option-File Format* `innodb_autoextend_increment'        
     *System Variable     `innodb_autoextend_increment'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `64'            
     *Range*              `1 ..           
                          1000'           

     The increment size (in MB) for extending the size of an
     auto-extending shared tablespace file when it becomes full.  The
     default value is 8. This variable does not affect the per-table
     tablespace files that are created if you use
     `innodb_file_per_table=1'.  Those files are auto-extending
     regardless of the value of `innodb_autoextend_increment'.  The
     initial extensions are by small amounts, after which extensions
     occur in increments of 4MB.

   *  `innodb_autoinc_lock_mode'

     Options for innodb_autoinc_lock_mode

     *Command-Line        `--innodb_autoinc_lock_mode=#'        
     Format*                              
     *Option-File Format* `innodb_autoinc_lock_mode'        
     *System Variable     `innodb_autoinc_lock_mode'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1'             
     *Valid Values*       `0'             
     `1'                                  
     `2'                                  

     The locking mode to use for generating auto-increment values.  The
     permissible values are 0, 1, or 2, for `traditional',
     `consecutive', or `interleaved' lock mode, respectively.  *Note
     innodb-auto-increment-handling::, describes the characteristics of
     these modes.

     This variable has a default of 1 (`consecutive' lock mode).

   *  `innodb_buffer_pool_instances'

     Options for innodb_buffer_pool_instances

     *Introduced*         5.5.4           
     *Command-Line        `--innodb_buffer_pool_instances=#'        
     Format*                              
     *Option-File Format* `innodb_buffer_pool_instances'        
     *System Variable     `innodb_buffer_pool_instances'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1'             
     *Range*              `1 ..           
                          64'             

     The number of regions that the *Note `InnoDB':
     innodb-storage-engine. buffer pool is divided into. For systems
     with buffer pools in the multi-gigabyte range, dividing the buffer
     pool into separate instances can improve concurrency, by reducing
     contention as different threads read and write to cached pages.
     Each page that is stored in or read from the buffer pool is
     assigned to one of the buffer pool instances randomly, using a
     hashing function.  Each buffer pool manages its own free lists,
     flush lists, LRUs, and all other data structures connected to a
     buffer pool, and is protected by its own buffer pool mutex.

     This option takes effect only when you set the
     `innodb_buffer_pool_size' to a size of 1 gigabyte or more. The
     total size you specify is divided among all the buffer pools. For
     best efficiency, specify a combination of
     `innodb_buffer_pool_instances' and `innodb_buffer_pool_size' so
     that each buffer pool instance is at least 1 gigabyte.

   *  `innodb_buffer_pool_size'

     Options for innodb_buffer_pool_size

     *Command-Line        `--innodb_buffer_pool_size=#'        
     Format*                              
     *Option-File Format* `innodb_buffer_pool_size'        
     *System Variable     `innodb_buffer_pool_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `134217728'        
     *Min Value*          `5242880'        

     The size in bytes of the memory buffer `InnoDB' uses to cache data
     and indexes of its tables. The default value is 128MB. The maximum
     value depends on the CPU architecture; the maximum is 4294967295
     (2^32-1) on 32-bit systems and 18446744073709551615 (2^64-1) on
     64-bit systems. On 32-bit systems, the CPU architecture and
     operating system may impose a lower practical maximum size than
     the stated maximum. When the size of the buffer pool is greater
     than 1GB, setting `innodb_buffer_pool_instances' to a value
     greater than 1 can improve the scalability on a busy server.

     The larger you set this value, the less disk I/O is needed to
     access data in tables. On a dedicated database server, you may set
     this to up to 80% of the machine physical memory size. Be prepared
     to scale back this value if these other issues occur:

        * Competition for physical memory might cause paging in the
          operating system.

        * InnoDB reserves additional memory for buffers and control
          structures, so that the total allocated space is
          approximately 10% greater than the specified size.

        * The address space must be contiguous, which can be an issue
          on Windows systems with DLLs that load at specific addresses.

        * The time to initialize the buffer pool is roughly
          proportional to its size. On large installations, this
          initialization time may be significant. For example, on a
          modern Linux x86_64 server, initialization of a 10GB buffer
          pool takes approximately 6 seconds. See *Note
          innodb-buffer-pool::.

   *  `innodb_change_buffering'

     Options for innodb_change_buffering

     *Command-Line        `--innodb_change_buffering=#'        
     Format*                              
     *Option-File Format* `innodb_change_buffering'        
     *System Variable     `innodb_change_buffering'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values          
                          (<=             
                          5.5.3)*         
     *Type*               `enumeration'        
     *Default*            `inserts'        
     *Valid Values*       `inserts'        
     `none'                               
                          *Permitted        
                          Values          
                          (>=             
                          5.5.4)*         
     *Type*               `enumeration'        
     *Default*            `all'           
     *Valid Values*       `inserts'        
     `deletes'                            
     `purges'                             
     `changes'                            
     `all'                                
     `none'                               

     Whether *Note `InnoDB': innodb-storage-engine. performs change
     buffering, an optimization that delays write operations to
     secondary indexes so that the I/O operations can be performed
     sequentially. The permitted values are `inserts' (buffer insert
     operations), `deletes' (buffer delete operations; strictly
     speaking, the writes that mark index records for later deletion
     during a purge operation), `changes' (buffer insert and
     delete-marking operations), `purges' (buffer purge operations, the
     writes when deleted index entries are finally garbage-collected),
     `all' (buffer insert, delete-marking, and purge operations) and
     `none' (do not buffer any operations). The default is `all'. For
     details, see *Note innodb-performance-change_buffering::.

   *  `innodb_checksums'

     Options for innodb_checksums

     *Command-Line        `--innodb_checksums'        
     Format*                              
     *Option-File Format* `innodb_checksums'        
     *System Variable     `innodb_checksums'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            

     `InnoDB' can use checksum validation on all pages read from the
     disk to ensure extra fault tolerance against broken hardware or
     data files. This validation is enabled by default. However, under
     some rare circumstances (such as when running benchmarks) this
     extra safety feature is unneeded and can be disabled with
     `--skip-innodb-checksums'.

   *  `innodb_commit_concurrency'

     Options for innodb_commit_concurrency

     *Command-Line        `--innodb_commit_concurrency=#'        
     Format*                              
     *Option-File Format* `innodb_commit_concurrency'        
     *System Variable     `innodb_commit_concurrency'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          1000'           

     The number of threads that can commit at the same time. A value of
     0 (the default) permits any number of transactions to commit
     simultaneously.

     The value of `innodb_commit_concurrency' cannot be changed at
     runtime from zero to nonzero or vice versa. The value can be
     changed from one nonzero value to another.

   *  `innodb_concurrency_tickets'

     Options for innodb_concurrency_tickets

     *Command-Line        `--innodb_concurrency_tickets=#'        
     Format*                              
     *Option-File Format* `innodb_concurrency_tickets'        
     *System Variable     `innodb_concurrency_tickets'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `500'           
     *Range*              `1 ..           
                          4294967295'        

     The number of threads that can enter `InnoDB' concurrently is
     determined by the `innodb_thread_concurrency' variable. A thread
     is placed in a queue when it tries to enter `InnoDB' if the number
     of threads has already reached the concurrency limit. When a
     thread is permitted to enter `InnoDB', it is given a number of
     `free tickets' equal to the value of `innodb_concurrency_tickets',
     and the thread can enter and leave `InnoDB' freely until it has
     used up its tickets. After that point, the thread again becomes
     subject to the concurrency check (and possible queuing) the next
     time it tries to enter `InnoDB'. The default value is 500.

   *  `innodb_data_file_path'

     Options for innodb_data_file_path

     *Command-Line        `--innodb_data_file_path=name'        
     Format*                              
     *Option-File Format* `innodb_data_file_path'        
     *System Variable     `innodb_data_file_path'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `ibdata1:10M:autoextend'        

     The paths to individual data files and their sizes. The full
     directory path to each data file is formed by concatenating
     `innodb_data_home_dir' to each path specified here. The file sizes
     are specified in KB, MB, or GB (1024MB) by appending `K', `M', or
     `G' to the size value. The sum of the sizes of the files must be
     at least slightly larger than 10MB. If you do not specify
     `innodb_data_file_path', the default behavior is to create a
     single auto-extending data file, slightly larger than 10MB, named
     `ibdata1'. The size limit of individual files is determined by
     your operating system. You can set the file size to more than 4GB
     on those operating systems that support big files. You can also
     use raw disk partitions as data files. For detailed information on
     configuring `InnoDB' tablespace files, see *Note
     innodb-configuration::.

   *  `innodb_data_home_dir'

     Options for innodb_data_home_dir

     *Command-Line        `--innodb_data_home_dir=path'        
     Format*                              
     *Option-File Format* `innodb_data_home_dir'        
     *System Variable     `innodb_data_home_dir'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The common part of the directory path for all `InnoDB' data files
     in the shared tablespace.  This setting does not affect the
     location of per-file tablespaces when `innodb_file_per_table' is
     enabled. The default value is the MySQL data directory. If you
     specify the value as an empty string, you can use absolute file
     paths in `innodb_data_file_path'.

   *  `innodb_doublewrite'

     Options for innodb_doublewrite

     *Command-Line        `--innodb-doublewrite'        
     Format*                              
     *Option-File Format* `innodb_doublewrite'        
     *System Variable     `innodb_doublewrite'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        

     If this variable is enabled (the default), `InnoDB' stores all
     data twice, first to the doublewrite buffer, and then to the
     actual data files. This variable can be turned off with
     `--skip-innodb_doublewrite' for benchmarks or cases when top
     performance is needed rather than concern for data integrity or
     possible failures.

   *  `innodb_fast_shutdown'

     Options for innodb_fast_shutdown

     *Command-Line        `--innodb_fast_shutdown[=#]'        
     Format*                              
     *Option-File Format* `innodb_fast_shutdown'        
     *System Variable     `innodb_fast_shutdown'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1'             
     *Valid Values*       `0'             
     `1'                                  
     `2'                                  

     The `InnoDB' shutdown mode. If the value is 0, `InnoDB' does a
     slow shutdown, a full purge and an insert buffer merge before
     shutting down. If the value is 1 (the default), `InnoDB' skips
     these operations at shutdown, a process known as a fast shutdown.
     If the value is 2, `InnoDB' flushes its logs and shuts down cold,
     as if MySQL had crashed; no committed transactions are lost, but
     the crash recovery operation makes the next startup take longer.

     The slow shutdown can take minutes, or even hours in extreme cases
     where substantial amounts of data are still buffered.  Use the
     slow shutdown technique before upgrading or downgrading between
     MySQL major releases, so that all data files are fully prepared in
     case the upgrade process updates the file format.

     Use `innodb_fast_shutdown=2' in emergency or troubleshooting
     situations, to get the absolute fastest shutdown if data is at
     risk of corruption.

   *  `innodb_file_format'

     Options for innodb_file_format

     *Command-Line        `--innodb_file_format=#'        
     Format*                              
     *Option-File Format* `innodb_file_format'        
     *System Variable     `innodb_file_format'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values          
                          (<=             
                          5.5.6)*         
     *Type*               `string'        
     *Default*            `Barracuda'        
     *Valid Values*       `Antelope'        
     `Barracuda'                          
                          *Permitted        
                          Values          
                          (>=             
                          5.5.7)*         
     *Type*               `string'        
     *Default*            `Antelope'        
     *Valid Values*       `Antelope'        
     `Barracuda'                          

     The file format to use for new *Note `InnoDB':
     innodb-storage-engine. tables. Currently, `Antelope' and
     `Barracuda' are supported. This applies only for tables that have
     their own tablespace, so for it to have an effect,
     `innodb_file_per_table' must be enabled. The Barracuda file format
     is required for certain InnoDB features such as table compression.

   *  `innodb_file_format_check'

     Options for innodb_file_format_check

     *Command-Line        `--innodb_file_format_check=#'        
     Format*                              
     *Option-File Format* `innodb_file_format_check'        
     *System Variable     `innodb_file_format_check'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `Antelope'        
                          *Permitted        
                          Values          
                          (>=             
                          5.5.1)*         
     *Type*               `string'        
     *Default*            `Barracuda'        
                          *Permitted        
                          Values          
                          (>=             
                          5.5.5)*         
     *Type*               `boolean'        
     *Default*            `ON'            

     As of MySQL 5.5.5, this variable can be set to 1 or 0 at server
     startup to enable or disable whether `InnoDB' checks the file
     format tag in the shared tablespace (for example, `Antelope' or
     `Barracuda'). If the tag is checked and is higher than that
     supported by the current version of `InnoDB', an error occurs and
     `InnoDB' does not start. If the tag is not higher, `InnoDB' sets
     the value of `innodb_file_format_max' to the file format tag.

     Before MySQL 5.5.5, this variable can be set to 1 or 0 at server
     startup to enable or disable whether `InnoDB' checks the file
     format tag in the shared tablespace. If the tag is checked and is
     higher than that supported by the current version of `InnoDB', an
     error occurs and `InnoDB' does not start. If the tag is not
     higher, `InnoDB' sets the value of `innodb_file_format_check' to
     the file format tag, which is the value seen at runtime.

     *Note*:

     Despite the default value sometimes being displayed as `ON' or
     `OFF', always use the numeric values 1 or 0 to turn this option on
     or off in your configuration file or command line.

   *  `innodb_file_format_max'

     Options for innodb_file_format_max

     *Introduced*         5.5.5           
     *Command-Line        `--innodb_file_format_max=#'        
     Format*                              
     *Option-File Format* `innodb_file_format_max'        
     *System Variable     `innodb_file_format_max'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `Antelope'        
     *Valid Values*       `Antelope'        
     `Barracuda'                          

     At server startup, `InnoDB' sets the value of
     `innodb_file_format_max' to the file format tag in the shared
     tablespace (for example, `Antelope' or `Barracuda').  If the
     server creates or opens a table with a `higher' file format, it
     sets the value of `innodb_file_format_max' to that format.

     This variable was added in MySQL 5.5.5.

   *  `innodb_file_per_table'

     Options for innodb_file_per_table

     *Command-Line        `--innodb_file_per_table'        
     Format*                              
     *Option-File Format* `innodb_file_per_table'        
     *System Variable     `innodb_file_per_table'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values          
                          (<=             
                          5.5.6)*         
     *Type*               `boolean'        
     *Default*            `ON'            
                          *Permitted        
                          Values          
                          (>=             
                          5.5.7)*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     If `innodb_file_per_table' is disabled (the default), `InnoDB'
     creates tables in the system tablespace. If
     `innodb_file_per_table' is enabled, `InnoDB' creates each new table
     using its own `.ibd' file for storing data and indexes, rather
     than in the system tablespace. See *Note
     innodb-multiple-tablespaces:: for information about advantages,
     disadvantages, and features, such as `InnoDB' table compression,
     that only work for tables stored in separate tablespaces.

   *  `innodb_flush_log_at_trx_commit'

     Options for innodb_flush_log_at_trx_commit

     *Command-Line        `--innodb_flush_log_at_trx_commit[=#]'        
     Format*                              
     *Option-File Format* `innodb_flush_log_at_trx_commit'        
     *System Variable     `innodb_flush_log_at_trx_commit'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `1'             
     *Valid Values*       `0'             
     `1'                                  
     `2'                                  

     If the value of `innodb_flush_log_at_trx_commit' is 0, the log
     buffer is written out to the log file once per second and the
     flush to disk operation is performed on the log file, but nothing
     is done at a transaction commit. When the value is 1 (the
     default), the log buffer is written out to the log file at each
     transaction commit and the flush to disk operation is performed on
     the log file. When the value is 2, the log buffer is written out
     to the file at each commit, but the flush to disk operation is not
     performed on it. However, the flushing on the log file takes place
     once per second also when the value is 2. Note that the
     once-per-second flushing is not 100% guaranteed to happen every
     second, due to process scheduling issues.

     The default value of 1 is required for full ACID compliance.  You
     can achieve better performance by setting the value different from
     1, but then you can lose up to one second worth of transactions in
     a crash. With a value of 0, any *Note `mysqld': mysqld. process
     crash can erase the last second of transactions. With a value of
     2, only an operating system crash or a power outage can erase the
     last second of transactions. `InnoDB''s crash recovery works
     regardless of the value.

     For the greatest possible durability and consistency in a
     replication setup using `InnoDB' with transactions, use
     `innodb_flush_log_at_trx_commit=1' and `sync_binlog=1' in your
     master server `my.cnf' file.

     *Caution*:

     Many operating systems and some disk hardware fool the
     flush-to-disk operation. They may tell *Note `mysqld': mysqld.
     that the flush has taken place, even though it has not. Then the
     durability of transactions is not guaranteed even with the setting
     1, and in the worst case a power outage can even corrupt the
     `InnoDB' database. Using a battery-backed disk cache in the SCSI
     disk controller or in the disk itself speeds up file flushes, and
     makes the operation safer. You can also try using the Unix command
     `hdparm' to disable the caching of disk writes in hardware caches,
     or use some other command specific to the hardware vendor.

   *  `innodb_flush_method'

     Options for innodb_flush_method

     *Command-Line        `--innodb_flush_method=name'        
     Format*                              
     *Option-File Format* `innodb_flush_method'        
     *System Variable     `innodb_flush_method'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type* (linux)       `enumeration'        
     *Default*            `fdatasync'        
     *Valid Values*       `fdatasync'        
     `O_DSYNC'                            
     `O_DIRECT'                           
                          *Permitted        
                          Values*         
     *Type* (hpux)        `enumeration'        
     *Default*            `fdatasync'        
     *Valid Values*       `fdatasync'        
     `O_DSYNC'                            
     `O_DIRECT'                           
                          *Permitted        
                          Values*         
     *Type* (solaris)     `enumeration'        
     *Default*            `fdatasync'        
     *Valid Values*       `fdatasync'        
     `O_DSYNC'                            
     `O_DIRECT'                           

     By default, `InnoDB' uses the `fsync()' system call to flush both
     the data and log files. If `innodb_flush_method' option is set to
     `O_DSYNC', `InnoDB' uses `O_SYNC' to open and flush the log files,
     and `fsync()' to flush the data files.  If `O_DIRECT' is specified
     (available on some GNU/Linux versions, FreeBSD, and Solaris),
     `InnoDB' uses `O_DIRECT' (or `directio()' on Solaris) to open the
     data files, and uses `fsync()' to flush both the data and log
     files. Note that `InnoDB' uses `fsync()' instead of `fdatasync()',
     and it does not use `O_DSYNC' by default because there have been
     problems with it on many varieties of Unix. This variable is
     relevant only for Unix. On Windows, the flush method is always
     `async_unbuffered' and cannot be changed.

     Depending on hardware configuration, setting `innodb_flush_method'
     to `O_DIRECT' can either have either a positive or negative effect
     on performance. Benchmark your particular configuration to decide
     which setting to use. The mix of read and write operations in your
     workload can also affect which setting performs better for you.
     For example, on a system with a hardware RAID controller and
     battery-backed write cache, `O_DIRECT' can help to avoid double
     buffering between the `InnoDB' buffer pool and the operating
     system's filesystem cache. On some systems where `InnoDB' data and
     log files are located on a SAN, the default value or `O_DSYNC'
     might be faster for a read-heavy workload with mostly `SELECT'
     statements. Always test this parameter with the same type of
     hardware and workload that reflects your production environment.

     Formerly, a value of `fdatasync' also specified the default
     behavior. This value was removed, due to confusion that a value of
     `fdatasync' caused `fsync()' system calls rather than
     `fdatasync()' for flushing. To obtain the default value now, do
     not set any value for `innodb_flush_method' at startup.

   *  `innodb_force_load_corrupted'

     Options for innodb_force_load_corrupted

     *Introduced*         5.5.18          
     *Command-Line        `--innodb_force_load_corrupted'        
     Format*                              
     *Option-File Format* `innodb_force_load_corrupted'        
     *System Variable     `innodb_force_load_corrupted'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Lets InnoDB load tables at startup that are marked as corrupted.
     Use only during troubleshooting, to recover data that is otherwise
     inaccessible. When troubleshooting is complete, turn this setting
     back off and restart the server.

   *  `innodb_force_recovery'

     Options for innodb_force_recovery

     *Command-Line        `--innodb_force_recovery=#'        
     Format*                              
     *Option-File Format* `innodb_force_recovery'        
     *System Variable     `innodb_force_recovery'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `0'             
     *Valid Values*       `0'             
     `1'                                  
     `2'                                  
     `3'                                  
     `4'                                  
     `5'                                  
     `6'                                  

     The crash recovery mode. Possible values are from 0 to 6. The
     meanings of these values are described in *Note
     forcing-innodb-recovery::.

     *Warning*:

     Only set this variable greater than 0 in an emergency situation,
     to dump your tables from a corrupt database. As a safety measure,
     `InnoDB' prevents any changes to its data when this variable is
     greater than 0.  This restriction also prohibits some queries that
     use `WHERE' or `ORDER BY' clauses, because high values can prevent
     queries from using indexes.

   *  `innodb_io_capacity'

     Options for innodb_io_capacity

     *Command-Line        `--innodb_io_capacity=#'        
     Format*                              
     *Option-File Format* `innodb_io_capacity'        
     *System Variable     `innodb_io_capacity'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `200'           
     *Range*              `100            
                          ..              
                          2**32-1'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `200'           
     *Range*              `100            
                          ..              
                          2**64-1'        

     An upper limit on the I/O activity performed by the `InnoDB'
     background tasks, such as flushing pages from the buffer pool and
     merging data from the insert buffer. The default value is 200. For
     busy systems capable of higher I/O rates, you can set a higher
     value at server startup, to help the server handle the background
     maintenance work associated with a high rate of row changes. For
     systems with individual 5400 RPM or 7200 RPM drives, you might
     lower the value to the former default of `100'.

     This parameter should be set to approximately the number of I/O
     operations that the system can perform per second.  Ideally, keep
     this setting as low as practical, but not so low that these
     background activities fall behind. If the value is too high, data
     is removed from the buffer pool and insert buffer too quickly to
     provide significant benefit from the caching.

     The value represents an estimated proportion of the I/O operations
     per second (IOPS) available to older-generation disk drives that
     could perform about 100 IOPS. The current default of 200 reflects
     that modern storage devices are capable of much higher I/O rates.

     In general, you can increase the value as a function of the number
     of drives used for *Note `InnoDB': innodb-storage-engine.  I/O,
     particularly fast drives capable of high numbers of IOPS.  For
     example, systems that use multiple disks or solid-state disks for
     *Note `InnoDB': innodb-storage-engine. are likely to benefit from
     the ability to control this parameter.

     Although you can specify a very high number, in practice such
     large values have little if any benefit; for example, a value of
     one million would be considered very high.

     You can set the `innodb_io_capacity' value to any number 100 or
     greater, and the default value is `200'. You can set the value of
     this parameter in the MySQL option file (`my.cnf' or `my.ini') or
     change it dynamically with the `SET GLOBAL' command, which
     requires the `SUPER' privilege.

     See *Note innodb-performance-thread_io_rate:: for more guidelines
     about this option. For general information about InnoDB I/O
     performance, see *Note optimizing-innodb-diskio::.

   *  `innodb_large_prefix'

     Options for innodb_large_prefix

     *Introduced*         5.5.14          
     *Command-Line        `--innodb_large_prefix'        
     Format*                              
     *Option-File Format* `innodb_large_prefix'        
     *System Variable     `innodb_large_prefix'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Enable this option to allow index key prefixes longer than 767
     bytes (up to 3072 bytes), for `InnoDB' tables that use the
     `DYNAMIC' and `COMPRESSED' row formats. (Creating such tables also
     requires the option values `innodb_file_format=barracuda' and
     `innodb_file_per_table=true'.)  See *Note innodb-restrictions::
     for the relevant maximums associated with index key prefixes under
     various settings.

     For tables using the `REDUNDANT' and `COMPACT' row formats, this
     option does not affect the allowed key prefix length. It does
     introduce a new error possibility. When this setting is enabled,
     attempting to create an index prefix with a key length greater
     than 3072 for a `REDUNDANT' or `COMPACT' table causes an error
     `ER_INDEX_COLUMN_TOO_LONG' (1727).

   *  `innodb_lock_wait_timeout'

     Options for innodb_lock_wait_timeout

     *Command-Line        `--innodb_lock_wait_timeout=#'        
     Format*                              
     *Option-File Format* `innodb_lock_wait_timeout'        
     *System Variable     `innodb_lock_wait_timeout'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `50'            
     *Range*              `1 ..           
                          1073741824'        

     The timeout in seconds an `InnoDB' transaction waits for a row
     lock before giving up. The default value is 50 seconds. A
     transaction that tries to access a row that is locked by another
     `InnoDB' transaction waits at most this many seconds for write
     access to the row before issuing the following error:

          ERROR 1205 (HY000): Lock wait timeout exceeded; try restarting transaction

     When a lock wait timeout occurs, the current statement is rolled
     back (not the entire transaction). To have the entire transaction
     roll back, start the server with the `--innodb_rollback_on_timeout'
     option. See also *Note innodb-error-handling::.

     You might decrease this value for highly interactive applications
     or OLTP systems, to display user feedback quickly or put the
     update into a queue for processing later. You might increase this
     value for long-running back-end operations, such as a transform
     step in a data warehouse that waits for other large insert or
     update operations to finish.

     `innodb_lock_wait_timeout' applies to `InnoDB' row locks only. A
     MySQL table lock does not happen inside `InnoDB' and this timeout
     does not apply to waits for table locks.

     The lock wait timeout value does not apply to deadlocks, because
     `InnoDB' detects them immediately and rolls back one of the
     deadlocked transactions.

   *  `innodb_locks_unsafe_for_binlog'

     Options for innodb_locks_unsafe_for_binlog

     *Command-Line        `--innodb_locks_unsafe_for_binlog'        
     Format*                              
     *Option-File Format* `innodb_locks_unsafe_for_binlog'        
     *System Variable     `innodb_locks_unsafe_for_binlog'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     This variable affects how `InnoDB' uses gap locking for searches
     and index scans. Normally, `InnoDB' uses an algorithm called
     _next-key locking_ that combines index-row locking with gap
     locking. `InnoDB' performs row-level locking in such a way that
     when it searches or scans a table index, it sets shared or
     exclusive locks on the index records it encounters. Thus, the
     row-level locks are actually index-record locks. In addition, a
     next-key lock on an index record also affects the `gap' before
     that index record. That is, a next-key lock is an index-record
     lock plus a gap lock on the gap preceding the index record. If one
     session has a shared or exclusive lock on record `R' in an index,
     another session cannot insert a new index record in the gap
     immediately before `R' in the index order. See *Note
     innodb-record-level-locks::.

     By default, the value of `innodb_locks_unsafe_for_binlog' is 0
     (disabled), which means that gap locking is enabled: `InnoDB' uses
     next-key locks for searches and index scans. To enable the
     variable, set it to 1. This causes gap locking to be disabled:
     `InnoDB' uses only index-record locks for searches and index scans.

     Enabling `innodb_locks_unsafe_for_binlog' does not disable the use
     of gap locking for foreign-key constraint checking or
     duplicate-key checking.

     The effect of enabling `innodb_locks_unsafe_for_binlog' is similar
     to but not identical to setting the transaction isolation level to
     `READ COMMITTED':

        * Enabling `innodb_locks_unsafe_for_binlog' is a global setting
          and affects all sessions, whereas the isolation level can be
          set globally for all sessions, or individually per session.

        * `innodb_locks_unsafe_for_binlog' can be set only at server
          startup, whereas the isolation level can be set at startup or
          changed at runtime.

     `READ COMMITTED' therefore offers finer and more flexible control
     than `innodb_locks_unsafe_for_binlog'.  For additional details
     about the effect of isolation level on gap locking, see *Note
     set-transaction::.

     Enabling `innodb_locks_unsafe_for_binlog' may cause phantom
     problems because other sessions can insert new rows into the gaps
     when gap locking is disabled. Suppose that there is an index on
     the `id' column of the `child' table and that you want to read and
     lock all rows from the table having an identifier value larger
     than 100, with the intention of updating some column in the
     selected rows later:

          SELECT * FROM child WHERE id > 100 FOR UPDATE;

     The query scans the index starting from the first record where
     `id' is greater than 100. If the locks set on the index records in
     that range do not lock out inserts made in the gaps, another
     session can insert a new row into the table. Consequently, if you
     were to execute the same *Note `SELECT': select. again within the
     same transaction, you would see a new row in the result set
     returned by the query. This also means that if new items are added
     to the database, `InnoDB' does not guarantee serializability.
     Therefore, if `innodb_locks_unsafe_for_binlog' is enabled,
     `InnoDB' guarantees at most an isolation level of `READ
     COMMITTED'. (Conflict serializability is still guaranteed.) For
     additional information about phantoms, see *Note
     innodb-next-key-locking::.

     Enabling `innodb_locks_unsafe_for_binlog' has additional effects:

        * For *Note `UPDATE': update. or *Note `DELETE': delete.
          statements, `InnoDB' holds locks only for rows that it
          updates or deletes. Record locks for nonmatching rows are
          released after MySQL has evaluated the `WHERE' condition.
          This greatly reduces the probability of deadlocks, but they
          can still happen.

        * For *Note `UPDATE': update. statements, if a row is already
          locked, `InnoDB' performs a `semi-consistent' read, returning
          the latest committed version to MySQL so that MySQL can
          determine whether the row matches the `WHERE' condition of the
          *Note `UPDATE': update. If the row matches (must be updated),
          MySQL reads the row again and this time `InnoDB' either locks
          it or waits for a lock on it.

     Consider the following example, beginning with this table:

          CREATE TABLE t (a INT NOT NULL, b INT) ENGINE = InnoDB;
          INSERT INTO t VALUES (1,2),(2,3),(3,2),(4,3),(5,2);
          COMMIT;

     In this case, table has no indexes, so searches and index scans
     use the hidden clustered index for record locking (see *Note
     innodb-index-types::).

     Suppose that one client performs an *Note `UPDATE': update. using
     these statements:

          SET autocommit = 0;
          UPDATE t SET b = 5 WHERE b = 3;

     Suppose also that a second client performs an *Note `UPDATE':
     update. by executing these statements following those of the first
     client:

          SET autocommit = 0;
          UPDATE t SET b = 4 WHERE b = 2;

     As *Note `InnoDB': innodb-storage-engine. executes each *Note
     `UPDATE': update, it first acquires an exclusive lock for each
     row, and then determines whether to modify it. If *Note `InnoDB':
     innodb-storage-engine. does not modify the row and
     `innodb_locks_unsafe_for_binlog' is enabled, it releases the lock.
     Otherwise, *Note `InnoDB': innodb-storage-engine. retains the lock
     until the end of the transaction. This affects transaction
     processing as follows.

     If `innodb_locks_unsafe_for_binlog' is disabled, the first *Note
     `UPDATE': update.  acquires x-locks and does not release any of
     them:

          x-lock(1,2); retain x-lock
          x-lock(2,3); update(2,3) to (2,5); retain x-lock
          x-lock(3,2); retain x-lock
          x-lock(4,3); update(4,3) to (4,5); retain x-lock
          x-lock(5,2); retain x-lock

     The second *Note `UPDATE': update. blocks as soon as it tries to
     acquire any locks (because first update has retained locks on all
     rows), and does not proceed until the first *Note `UPDATE':
     update. commits or rolls back:

          x-lock(1,2); block and wait for first UPDATE to commit or roll back

     If `innodb_locks_unsafe_for_binlog' is enabled, the first *Note
     `UPDATE': update.  acquires x-locks and releases those for rows
     that it does not modify:

          x-lock(1,2); unlock(1,2)
          x-lock(2,3); update(2,3) to (2,5); retain x-lock
          x-lock(3,2); unlock(3,2)
          x-lock(4,3); update(4,3) to (4,5); retain x-lock
          x-lock(5,2); unlock(5,2)

     For the second `UPDATE', `InnoDB' does a `semi-consistent' read,
     returning the latest committed version of each row to MySQL so
     that MySQL can determine whether the row matches the `WHERE'
     condition of the *Note `UPDATE': update.:

          x-lock(1,2); update(1,2) to (1,4); retain x-lock
          x-lock(2,3); unlock(2,3)
          x-lock(3,2); update(3,2) to (3,4); retain x-lock
          x-lock(4,3); unlock(4,3)
          x-lock(5,2); update(5,2) to (5,4); retain x-lock

   *  `innodb_log_buffer_size'

     Options for innodb_log_buffer_size

     *Command-Line        `--innodb_log_buffer_size=#'        
     Format*                              
     *Option-File Format* `innodb_log_buffer_size'        
     *System Variable     `innodb_log_buffer_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `8388608'        
     *Range*              `262144         
                          ..              
                          4294967295'        

     The size in bytes of the buffer that `InnoDB' uses to write to the
     log files on disk. The default value is 8MB. A large log buffer
     enables large transactions to run without a need to write the log
     to disk before the transactions commit. Thus, if you have big
     transactions, making the log buffer larger saves disk I/O.

   *  `innodb_log_file_size'

     Options for innodb_log_file_size

     *Command-Line        `--innodb_log_file_size=#'        
     Format*                              
     *Option-File Format* `innodb_log_file_size'        
     *System Variable     `innodb_log_file_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `5242880'        
     *Range*              `1048576        
                          ..              
                          4294967295'        

     The size in bytes of each log file in a log group. The combined
     size of log files cannot exceed 3.99999999068677 GB which is equal
     to the 4294967295 range limit. A pair of 2047 MB log files, for
     example, would allow you to approach the range limit but not
     exceed it. The default value is 5MB.  Sensible values range from
     1MB to 1/N-th of the size of the buffer pool, where N is the
     number of log files in the group. The larger the value, the less
     checkpoint flush activity is needed in the buffer pool, saving
     disk I/O.  But larger log files also mean that recovery is slower
     in case of a crash.

   *  `innodb_log_files_in_group'

     Options for innodb_log_files_in_group

     *Command-Line        `--innodb_log_files_in_group=#'        
     Format*                              
     *Option-File Format* `innodb_log_files_in_group'        
     *System Variable     `innodb_log_files_in_group'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `2'             
     *Range*              `2 ..           
                          100'            

     The number of log files in the log group.  `InnoDB' writes to the
     files in a circular fashion. The default (and recommended) value
     is 2.

   *  `innodb_log_group_home_dir'

     Options for innodb_log_group_home_dir

     *Command-Line        `--innodb_log_group_home_dir=path'        
     Format*                              
     *Option-File Format* `innodb_log_group_home_dir'        
     *System Variable     `innodb_log_group_home_dir'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The directory path to the `InnoDB' redo log files. If you do not
     specify any `InnoDB' log variables, the default is to create two
     files named `ib_logfile0' and `ib_logfile1' in the MySQL data
     directory.  Their size is given by the size of the
     `innodb_log_file_size' system variable.

   *  `innodb_max_dirty_pages_pct'

     Options for innodb_max_dirty_pages_pct

     *Command-Line        `--innodb_max_dirty_pages_pct=#'        
     Format*                              
     *Option-File Format* `innodb_max_dirty_pages_pct'        
     *System Variable     `innodb_max_dirty_pages_pct'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `75'            
     *Range*              `0 ..           
                          99'             

     This is an integer in the range from 0 to 99. The default value is
     75. The main thread in `InnoDB' tries to write pages from the
     buffer pool so that the percentage of dirty (not yet written)
     pages will not exceed this value.

   *  `innodb_max_purge_lag'

     Options for innodb_max_purge_lag

     *Command-Line        `--innodb_max_purge_lag=#'        
     Format*                              
     *Option-File Format* `innodb_max_purge_lag'        
     *System Variable     `innodb_max_purge_lag'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          4294967295'        

     This variable controls how to delay *Note `INSERT': insert, *Note
     `UPDATE': update, and *Note `DELETE': delete. operations when purge
     operations are lagging (see *Note innodb-multi-versioning::). The
     default value 0 (no delays).

     The `InnoDB' transaction system maintains a list of transactions
     that have index records delete-marked by *Note `UPDATE': update. or
     *Note `DELETE': delete. operations. Let the length of this list be
     PURGE_LAG.  When PURGE_LAG exceeds `innodb_max_purge_lag', each
     *Note `INSERT': insert, *Note `UPDATE': update, and *Note
     `DELETE': delete. operation is delayed by
     ((PURGE_LAG/`innodb_max_purge_lag')x10)-5 milliseconds. The delay
     is computed in the beginning of a purge batch, every ten seconds.
     The operations are not delayed if purge cannot run because of an
     old consistent read view that could see the rows to be purged.

     A typical setting for a problematic workload might be 1 million,
     assuming that transactions are small, only 100 bytes in size, and
     it is permissible to have 100MB of unpurged `InnoDB' table rows.

     The lag value is displayed as the history list length in the
     `TRANSACTIONS' section of InnoDB Monitor output. For example, if
     the output includes the following lines, the lag value is 20:

          ------------
          TRANSACTIONS
          ------------
          Trx id counter 0 290328385
          Purge done for trx's n:o < 0 290315608 undo n:o < 0 17
          History list length 20

   *  `innodb_mirrored_log_groups'

     Has no effect.

   *  `innodb_old_blocks_pct'

     Options for innodb_old_blocks_pct

     *Command-Line        `--innodb_old_blocks_pct=#'        
     Format*                              
     *Option-File Format* `innodb_old_blocks_pct'        
     *System Variable     `innodb_old_blocks_pct'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `37'            
     *Range*              `5 ..           
                          95'             

     Specifies the approximate percentage of the `InnoDB' buffer pool
     used for the old block sublist. The range of values is 5 to 95.
     The default value is 37 (that is, 3/8 of the pool). See *Note
     innodb-buffer-pool:: for information about buffer pool management,
     such as the LRU algorithm and eviction policies.

   *  `innodb_old_blocks_time'

     Options for innodb_old_blocks_time

     *Command-Line        `--innodb_old_blocks_time=#'        
     Format*                              
     *Option-File Format* `innodb_old_blocks_time'        
     *System Variable     `innodb_old_blocks_time'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          2**32-1'        

     Non-zero values protect against the buffer pool being filled up by
     data that is referenced only for a brief period, such as during a
     full table scan. Increasing this value offers more protection
     against full table scans interfering with data cached in the
     buffer pool.

     Specifies how long in milliseconds (ms) a block inserted into the
     old sublist must stay there after its first access before it can
     be moved to the new sublist. If the value is 0, a block inserted
     into the old sublist moves immediately to the new sublist the
     first time it is accessed, no matter how soon after insertion the
     access occurs. If the value is greater than 0, blocks remain in the
     old sublist until an access occurs at least that many ms after the
     first access. For example, a value of 1000 causes blocks to stay
     in the old sublist for 1 second after the first access before they
     become eligible to move to the new sublist.

     This variable is often used in combination with
     `innodb_old_blocks_pct'. See *Note innodb-buffer-pool:: for
     information about buffer pool management, such as the LRU
     algorithm and eviction policies.

   *  `innodb_open_files'

     Options for innodb_open_files

     *Command-Line        `--innodb_open_files=#'        
     Format*                              
     *Option-File Format* `innodb_open_files'        
     *System Variable     `innodb_open_files'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `300'           
     *Range*              `10 ..          
                          4294967295'        

     This variable is relevant only if you use multiple `InnoDB'
     tablespaces. It specifies the maximum number of `.ibd' files that
     MySQL can keep open at one time. The minimum value is 10. The
     default value is 300.

     The file descriptors used for `.ibd' files are for `InnoDB' tables
     only. They are independent of those specified by the
     `--open-files-limit' server option, and do not affect the
     operation of the table cache.

   *  `innodb_print_all_deadlocks'

     Options for innodb_print_all_deadlocks

     *Introduced*         5.5.30          
     *Command-Line        `--innodb_print_all_deadlocks=#'        
     Format*                              
     *Option-File Format* `innodb_print_all_deadlocks'        
     *System Variable     `innodb_print_all_deadlocks'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     When this option is enabled, information about all deadlocks in
     `InnoDB' user transactions is recorded in the `mysqld' *Note error
     log: error-log. Otherwise, you see information about only the last
     deadlock, using the `SHOW ENGINE INNODB STATUS' command. An
     occasional `InnoDB' deadlock is not necessarily an issue, because
     `InnoDB' detects the condition immediately, and rolls back one of
     the transactions automatically. You might use this option to
     troubleshoot why deadlocks are happening if an application does
     not have appropriate error-handling logic to detect the rollback
     and retry its operation. A large number of deadlocks might
     indicate the need to restructure transactions that issue DML or
     `SELECT ... FOR UPDATE' statements for multiple tables, so that
     each transaction accesses the tables in the same order, thus
     avoiding the deadlock condition.

   *  `innodb_purge_batch_size'

     Options for innodb_purge_batch_size

     *Introduced*         5.5.4           
     *Command-Line        `--innodb_purge_batch_size=#'        
     Format*                              
     *Option-File Format* `innodb_purge_batch_size'        
     *System Variable     `innodb_purge_batch_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values          
                          (>=             
                          5.5.4)*         
     *Type*               `numeric'        
     *Default*            `20'            
     *Range*              `1 ..           
                          5000'           

     The granularity of changes, expressed in units of redo log
     records, that trigger a purge operation, flushing the changed
     buffer pool blocks to disk. The default value is 20, and the range
     is 1-5000. This option is intended for tuning performance in
     combination with the setting `innodb_purge_threads=1', and typical
     users do not need to modify it.

   *  `innodb_purge_threads'

     Options for innodb_purge_threads

     *Introduced*         5.5.4           
     *Command-Line        `--innodb_purge_threads=#'        
     Format*                              
     *Option-File Format* `innodb_purge_threads'        
     *System Variable     `innodb_purge_threads'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values          
                          (>=             
                          5.5.4)*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          1'              

     The number of background threads devoted to the InnoDB purge
     operation. Currently, can only be 0 (the default) or 1. The
     default value of 0 signifies that the purge operation is performed
     as part of the master thread.  Running the purge operation in its
     own thread can reduce internal contention within InnoDB, improving
     scalability.  Currently, the performance gain might be minimal
     because the background thread might encounter different kinds of
     contention than before. This feature primarily lays the groundwork
     for future performance work.

   *  `innodb_random_read_ahead'

     Options for innodb_random_read_ahead

     *Introduced*         5.5.16          
     *Command-Line        `--innodb_random_read_ahead=#'        
     Format*                              
     *Option-File Format* `innodb_random_read_ahead'        
     *System Variable     `innodb_random_read_ahead'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Enables the random read-ahead technique for optimizing `InnoDB'
     I/O. This is a setting that was originally on by default, then was
     removed in MySQL 5.5, and now is available but turned off by
     default. See *Note innodb-performance-read_ahead:: for details
     about the performance considerations for the different types of
     read-ahead requests. For general I/O tuning advice, see *Note
     optimizing-innodb-diskio::.

   *  `innodb_read_ahead_threshold'

     Options for innodb_read_ahead_threshold

     *Command-Line        `--innodb_read_ahead_threshold=#'        
     Format*                              
     *Option-File Format* `innodb_read_ahead_threshold'        
     *System Variable     `innodb_read_ahead_threshold'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `56'            
     *Range*              `0 ..           
                          64'             

     Controls the sensitivity of linear read-ahead that `InnoDB' uses
     to prefetch pages into the buffer pool. If `InnoDB' reads at least
     `innodb_read_ahead_threshold' pages sequentially from an extent
     (64 pages), it initiates an asynchronous read for the entire
     following extent. The permissible range of values is 0 to 64. The
     default is 56: `InnoDB' must read at least 56 pages sequentially
     from an extent to initiate an asynchronous read for the following
     extent.

   *  `innodb_read_io_threads'

     Options for innodb_read_io_threads

     *Command-Line        `--innodb_read_io_threads=#'        
     Format*                              
     *Option-File Format* `innodb_read_io_threads'        
     *System Variable     `innodb_read_io_threads'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `4'             
     *Range*              `1 ..           
                          64'             

     The number of I/O threads for read operations in `InnoDB'. The
     default value is 4.

     *Note*:

     On Linux systems, running multiple MySQL servers (typically more
     than 12) with default settings for `innodb_read_io_threads',
     `innodb_write_io_threads', and the Linux `aio-max-nr' setting can
     exceed system limits. Ideally, increase the `aio-max-nr' setting;
     as a workaround, you might reduce the settings for one or both of
     the MySQL configuration options.

   *  `innodb_replication_delay'

     Options for innodb_replication_delay

     *Command-Line        `--innodb_replication_delay=#'        
     Format*                              
     *Option-File Format* `innodb_replication_delay'        
     *System Variable     `innodb_replication_delay'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          4294967295'        

     The replication thread delay (in ms) on a slave server if
     `innodb_thread_concurrency' is reached.

   *  `innodb_rollback_on_timeout'

     Options for innodb_rollback_on_timeout

     *Command-Line        `--innodb_rollback_on_timeout'        
     Format*                              
     *Option-File Format* `innodb_rollback_on_timeout'        
     *System Variable     `innodb_rollback_on_timeout'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     In MySQL 5.5, `InnoDB' rolls back only the last statement on a
     transaction timeout by default. If `--innodb_rollback_on_timeout'
     is specified, a transaction timeout causes `InnoDB' to abort and
     roll back the entire transaction (the same behavior as in MySQL
     4.1).

   *  `innodb_rollback_segments'

     Options for innodb_rollback_segments

     *Introduced*         5.5.11          
     *Command-Line        `--innodb_rollback_segments=#'        
     Format*                              
     *Option-File Format* `innodb_rollback_segments'        
     *System Variable     `innodb_rollback_segments'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `128'           
     *Range*              `1 ..           
                          128'            

     Defines how many of the rollback segments in the system tablespace
     that InnoDB uses within a transaction. You might reduce this value
     from its default of 128 if a smaller number of rollback segments
     performs better for your workload.

   *  `innodb_spin_wait_delay'

     Options for innodb_spin_wait_delay

     *Command-Line        `--innodb_spin_wait_delay=#'        
     Format*                              
     *Option-File Format* `innodb_spin_wait_delay'        
     *System Variable     `innodb_spin_wait_delay'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `6'             
     *Range*              `0 ..           
                          4294967295'        

     The maximum delay between polls for a spin lock. The low-level
     implementation of this mechanism varies depending on the
     combination of hardware and operating system, so the delay does
     not correspond to a fixed time interval. The default value is 6.

   *  `innodb_stats_method'

     Options for innodb_stats_method

     *Introduced*         5.5.10          
     *Command-Line        `--innodb_stats_method=name'        
     Format*                              
     *Option-File Format* `innodb_stats_method'        
     *System Variable     `innodb_stats_method'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `nulls_equal'        
     *Valid Values*       `nulls_equal'        
     `nulls_unequal'                      
     `nulls_ignored'                      

     How the server treats `NULL' values when collecting statistics
     about the distribution of index values for `InnoDB' tables. This
     variable has three possible values, `nulls_equal',
     `nulls_unequal', and `nulls_ignored'. For `nulls_equal', all `NULL'
     index values are considered equal and form a single value group
     that has a size equal to the number of `NULL' values. For
     `nulls_unequal', `NULL' values are considered unequal, and each
     `NULL' forms a distinct value group of size 1. For `nulls_ignored',
     `NULL' values are ignored.

     The method that is used for generating table statistics influences
     how the optimizer chooses indexes for query execution, as
     described in *Note myisam-index-statistics::.

   *  `innodb_stats_on_metadata'

     Options for innodb_stats_on_metadata

     *Introduced*         5.5.4           
     *Command-Line        `--innodb_stats_on_metadata'        
     Format*                              
     *Option-File Format* `innodb_stats_on_metadata'        
     *System Variable     `innodb_stats_on_metadata'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            

     When this variable is enabled (which is the default, as before the
     variable was created), `InnoDB' updates statistics during metadata
     statements such as *Note `SHOW TABLE STATUS': show-table-status.
     or *Note `SHOW INDEX': show-index, or when accessing the
     `INFORMATION_SCHEMA' tables *Note `TABLES': tables-table. or *Note
     `STATISTICS': statistics-table. (These updates are similar to what
     happens for *Note `ANALYZE TABLE': analyze-table.) When disabled,
     `InnoDB' does not update statistics during these operations.
     Disabling this variable can improve access speed for schemas that
     have a large number of tables or indexes. It can also improve the
     stability of execution plans for queries that involve `InnoDB'
     tables.

   *  `innodb_stats_sample_pages'

     Options for innodb_stats_sample_pages

     *Command-Line        `--innodb_stats_sample_pages=#'        
     Format*                              
     *Option-File Format* `innodb_stats_sample_pages'        
     *System Variable     `innodb_stats_sample_pages'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `8'             
     *Range*              `1 ..           
                          2**64-1'        

     The number of index pages to sample for index distribution
     statistics such as are calculated by *Note `ANALYZE TABLE':
     analyze-table.  The default value is 8. For more information, see
     *Note innodb-other-changes::.

   *  `innodb_strict_mode'

     Options for innodb_strict_mode

     *Command-Line        `--innodb_strict_mode=#'        
     Format*                              
     *Option-File Format* `innodb_strict_mode'        
     *System Variable     `innodb_strict_mode'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Whether `InnoDB' returns errors rather than warnings for certain
     conditions. This is analogous to strict SQL mode. The default
     value is `OFF'. See *Note innodb-other-changes-strict-mode:: for a
     list of the conditions that are affected.

   *  `innodb_support_xa'

     Options for innodb_support_xa

     *Command-Line        `--innodb_support_xa'        
     Format*                              
     *Option-File Format* `innodb_support_xa'        
     *System Variable     `innodb_support_xa'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `TRUE'          

     Enables `InnoDB' support for two-phase commit in XA transactions,
     causing an extra disk flush for transaction preparation. This
     setting is the default. The XA mechanism is used internally and is
     essential for any server that has its binary log turned on and is
     accepting changes to its data from more than one thread. If you
     turn it off, transactions can be written to the binary log in a
     different order from the one in which the live database is
     committing them. This can produce different data when the binary
     log is replayed in disaster recovery or on a replication slave. Do
     not turn it off on a replication master server unless you have an
     unusual setup where only one thread is able to change data.

     For a server that is accepting data changes from only one thread,
     it is safe and recommended to turn off this option to improve
     performance for *Note `InnoDB': innodb-storage-engine.  tables.
     For example, you can turn it off on replication slaves where only
     the replication SQL thread is changing data.

     You can also turn off this option if you do not need it for safe
     binary logging or replication, and you also do not use an external
     XA transaction manager.

   *  `innodb_sync_spin_loops'

     Options for innodb_sync_spin_loops

     *Command-Line        `--innodb_sync_spin_loops=#'        
     Format*                              
     *Option-File Format* `innodb_sync_spin_loops'        
     *System Variable     `innodb_sync_spin_loops'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `30'            
     *Range*              `0 ..           
                          4294967295'        

     The number of times a thread waits for an `InnoDB' mutex to be
     freed before the thread is suspended. The default value is 30.

   *  `innodb_table_locks'

     Options for innodb_table_locks

     *Command-Line        `--innodb_table_locks'        
     Format*                              
     *Option-File Format* `innodb_table_locks'        
     *System Variable     `innodb_table_locks'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `TRUE'          

     If `autocommit = 0', `InnoDB' honors *Note `LOCK TABLES':
     lock-tables.; MySQL does not return from `LOCK TABLES ... WRITE'
     until all other threads have released all their locks to the
     table. The default value of `innodb_table_locks' is 1, which means
     that *Note `LOCK TABLES': lock-tables.  causes InnoDB to lock a
     table internally if `autocommit = 0'.

     As of MySQL 5.5.3, `innodb_table_locks = 0' has no effect for
     tables locked explicitly with *Note `LOCK TABLES ... WRITE':
     lock-tables. It still has an effect for tables locked for read or
     write by *Note `LOCK TABLES ... WRITE': lock-tables. implicitly
     (for example, through triggers) or by *Note `LOCK TABLES ...
     READ': lock-tables.

   *  `innodb_thread_concurrency'

     Options for innodb_thread_concurrency

     *Command-Line        `--innodb_thread_concurrency=#'        
     Format*                              
     *Option-File Format* `innodb_thread_concurrency'        
     *System Variable     `innodb_thread_concurrency'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          1000'           

     `InnoDB' tries to keep the number of operating system threads
     concurrently inside `InnoDB' less than or equal to the limit given
     by this variable. Once the number of threads reaches this limit,
     additional threads are placed into a wait state within a FIFO
     queue for execution. Threads waiting for locks are not counted in
     the number of concurrently executing threads.

     The correct value for this variable is dependent on environment
     and workload. Try a range of different values to determine what
     value works for your applications. A recommended value is 2 times
     the number of CPUs plus the number of disks.

     The range of this variable is 0 to 1000. A value of 0 (the
     default) is interpreted as infinite concurrency (no concurrency
     checking). Disabling thread concurrency checking enables InnoDB to
     create as many threads as it needs. A value of 0 also disables the
     `queries inside InnoDB' and `queries in queue counters' in the
     `ROW OPERATIONS' section of `SHOW ENGINE INNODB STATUS' output.

   *  `innodb_thread_sleep_delay'

     Options for innodb_thread_sleep_delay

     *Command-Line        `--innodb_thread_sleep_delay=#'        
     Format*                              
     *Option-File Format* `innodb_thread_sleep_delay'        
     *System Variable     `innodb_thread_sleep_delay'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `10000'         

     How long `InnoDB' threads sleep before joining the `InnoDB' queue,
     in microseconds.  The default value is 10,000. A value of 0
     disables sleep.

   *  `innodb_use_native_aio'

     Options for innodb_use_native_aio

     *Introduced*         5.5.4           
     *Command-Line        `--innodb_use_native_aio=#'        
     Format*                              
     *Option-File Format* `innodb_use_native_aio'        
     *System Variable     `innodb_use_native_aio'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            

     Specifies whether to use the Linux asynchronous I/O subsystem.
     This variable applies to Linux systems only, and cannot be changed
     while the server is running.

     Normally, you do not need to touch this option, because it is
     enabled by default. If a problem with the asynchronous I/O
     subsystem in the OS prevents `InnoDB' from starting, start the
     server with this variable disabled (use `innodb_use_native_aio=0'
     in the option file). This option could also be turned off
     automatically during startup, if `InnoDB' detects a potential
     problem such as a combination of `tmpdir' location, `tmpfs'
     filesystem, and Linux kernel that that does not support AIO on
     `tmpfs'.

     This variable was added in MySQL 5.5.4.

   *  `innodb_use_sys_malloc'

     Options for innodb_use_sys_malloc

     *Command-Line        `--innodb_use_sys_malloc=#'        
     Format*                              
     *Option-File Format* `innodb_use_sys_malloc'        
     *System Variable     `innodb_use_sys_malloc'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            

     Whether `InnoDB' uses the operating system memory allocator (`ON')
     or its own (`OFF'). The default value is `ON'.

   *  `innodb_version'

     The `InnoDB' version number. Starting in 5.5.30, the separate
     numbering for `InnoDB' is discontinued and this value is the same
     as for the `version' variable.

   *  `innodb_write_io_threads'

     Options for innodb_write_io_threads

     *Command-Line        `--innodb_write_io_threads=#'        
     Format*                              
     *Option-File Format* `innodb_write_io_threads'        
     *System Variable     `innodb_write_io_threads'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `4'             
     *Range*              `1 ..           
                          64'             

     The number of I/O threads for write operations in `InnoDB'. The
     default value is 4.

     *Note*:

     On Linux systems, running multiple MySQL servers (typically more
     than 12) with default settings for `innodb_read_io_threads',
     `innodb_write_io_threads', and the Linux `aio-max-nr' setting can
     exceed system limits. Ideally, increase the `aio-max-nr' setting;
     as a workaround, you might reduce the settings for one or both of
     the MySQL configuration options.

   * `sync_binlog'

     Options for sync_binlog

     *Command-Line        `--sync-binlog=#'        
     Format*                              
     *Option-File Format* `sync_binlog'        
     *System Variable     `sync_binlog'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          18446744073709547520'        

     If the value of this variable is greater than 0, the MySQL server
     synchronizes its binary log to disk (using `fdatasync()') after
     every `sync_binlog' writes to the binary log. There is one write
     to the binary log per statement if autocommit is enabled, and one
     write per transaction otherwise. The default value of
     `sync_binlog' is 0, which does no synchronizing to disk. A value
     of 1 is the safest choice, because in the event of a crash you
     lose at most one statement or transaction from the binary log.
     However, it is also the slowest choice (unless the disk has a
     battery-backed cache, which makes synchronization very fast).


File: manual.info,  Node: using-innodb-tables,  Next: innodb-data-log-reconfiguration,  Prev: innodb-parameters,  Up: innodb-storage-engine

14.3.5 Creating and Using `InnoDB' Tables
-----------------------------------------

* Menu:

* innodb-transactions-with-different-apis::  Using `InnoDB' Transactions
* converting-tables-to-innodb::  Converting Tables from `MyISAM' to `InnoDB'
* innodb-auto-increment-handling::  `AUTO_INCREMENT' Handling in `InnoDB'
* innodb-foreign-key-constraints::  `InnoDB' and `FOREIGN KEY' Constraints
* innodb-and-mysql-replication::  `InnoDB' and MySQL Replication

To create an `InnoDB' table, specify an `ENGINE=InnoDB' option in the
*Note `CREATE TABLE': create-table. statement:

     CREATE TABLE customers (a INT, b CHAR (20), INDEX (a)) ENGINE=InnoDB;

The statement creates a table and an index on column `a' in the
`InnoDB' tablespace that consists of the data files that you specified
in `my.cnf'. In addition, MySQL creates a file `customers.frm' in the
`test' directory under the MySQL database directory. Internally,
`InnoDB' adds an entry for the table to its own data dictionary. The
entry includes the database name. For example, if `test' is the
database in which the `customers' table is created, the entry is for
`'test/customers''. This means you can create a table of the same name
`customers' in some other database, and the table names do not collide
inside `InnoDB'.

You can query the amount of free space in the `InnoDB' tablespace by
issuing a *Note `SHOW TABLE STATUS': show-table-status. statement for
any `InnoDB' table. The amount of free space in the tablespace appears
in the `Data_free' section in the output of *Note `SHOW TABLE STATUS':
show-table-status. For example:

     SHOW TABLE STATUS FROM test LIKE 'customers'

The statistics *Note `SHOW': show. displays for `InnoDB' tables are
only approximate. They are used in SQL optimization. Table and index
reserved sizes in bytes are accurate, though.


File: manual.info,  Node: innodb-transactions-with-different-apis,  Next: converting-tables-to-innodb,  Prev: using-innodb-tables,  Up: using-innodb-tables

14.3.5.1 Using `InnoDB' Transactions
....................................

* Transactions in SQL *

By default, each client that connects to the MySQL server begins with
autocommit mode enabled, which automatically commits every SQL
statement as you execute it. To use multiple-statement transactions,
you can switch autocommit off with the SQL statement `SET autocommit =
0' and end each transaction with either *Note `COMMIT': commit. or
*Note `ROLLBACK': commit. If you want to leave autocommit on, you can
begin your transactions within *Note `START TRANSACTION': commit. and
end them with *Note `COMMIT': commit. or *Note `ROLLBACK': commit. The
following example shows two transactions. The first is committed; the
second is rolled back.

     shell> mysql test

     mysql> CREATE TABLE customer (a INT, b CHAR (20), INDEX (a))
         -> ENGINE=InnoDB;
     Query OK, 0 rows affected (0.00 sec)
     mysql> START TRANSACTION;
     Query OK, 0 rows affected (0.00 sec)
     mysql> INSERT INTO customer VALUES (10, 'Heikki');
     Query OK, 1 row affected (0.00 sec)
     mysql> COMMIT;
     Query OK, 0 rows affected (0.00 sec)
     mysql> SET autocommit=0;
     Query OK, 0 rows affected (0.00 sec)
     mysql> INSERT INTO customer VALUES (15, 'John');
     Query OK, 1 row affected (0.00 sec)
     mysql> ROLLBACK;
     Query OK, 0 rows affected (0.00 sec)
     mysql> SELECT * FROM customer;
     +------+--------+
     | a    | b      |
     +------+--------+
     |   10 | Heikki |
     +------+--------+
     1 row in set (0.00 sec)
     mysql>

* Transactions in Client-Side Languages *

In APIs such as PHP, Perl DBI, JDBC, ODBC, or the standard C call
interface of MySQL, you can send transaction control statements such as
*Note `COMMIT': commit. to the MySQL server as strings just like any
other SQL statements such as *Note `SELECT': select. or *Note `INSERT':
insert. Some APIs also offer separate special transaction commit and
rollback functions or methods.


File: manual.info,  Node: converting-tables-to-innodb,  Next: innodb-auto-increment-handling,  Prev: innodb-transactions-with-different-apis,  Up: using-innodb-tables

14.3.5.2 Converting Tables from `MyISAM' to `InnoDB'
....................................................

To convert a non-`InnoDB' table to use `InnoDB' use *Note `ALTER
TABLE': alter-table.:

     ALTER TABLE TABLE_NAME ENGINE=InnoDB;

*Important*:

Do not convert MySQL system tables in the `mysql' database (such as
`user' or `host') to the `InnoDB' type.  This is an unsupported
operation. The system tables must always be of the `MyISAM' type.

To make an InnoDB table that is a clone of a MyISAM table:

   * Create an empty `InnoDB' table with identical definitions.

   * Create the appropriate indexes.

   * Insert the rows with `INSERT INTO INNODB_TABLE SELECT * FROM
     MYISAM_TABLE'.

You can also create the indexes after inserting the data.
Historically, creating new secondary indexes was a slow operation for
InnoDB, but this is no longer the case.

If you have `UNIQUE' constraints on secondary keys, you can speed up a
table import by turning off the uniqueness checks temporarily during
the import operation:

     SET unique_checks=0;... IMPORT OPERATION ...
     SET unique_checks=1;

For big tables, this saves disk I/O because `InnoDB' can use its insert
buffer to write secondary index records as a batch. Be certain that the
data contains no duplicate keys.  `unique_checks' permits but does not
require storage engines to ignore duplicate keys.

To get better control over the insertion process, you might insert big
tables in pieces:

     INSERT INTO newtable SELECT * FROM oldtable
        WHERE yourkey > SOMETHING AND yourkey <= SOMETHINGELSE;

After all records have been inserted, you can rename the tables.

During the conversion of big tables, increase the size of the `InnoDB'
buffer pool to reduce disk I/O, to a maximum of 80% of physical memory.
You can also increase the sizes of the `InnoDB' log files.

Make sure that you do not fill up the tablespace: `InnoDB' tables
require a lot more disk space than `MyISAM' tables. If an *Note `ALTER
TABLE': alter-table. operation runs out of space, it starts a rollback,
and that can take hours if it is disk-bound. For inserts, `InnoDB' uses
the insert buffer to merge secondary index records to indexes in
batches. That saves a lot of disk I/O.  For rollback, no such mechanism
is used, and the rollback can take 30 times longer than the insertion.

In the case of a runaway rollback, if you do not have valuable data in
your database, it may be advisable to kill the database process rather
than wait for millions of disk I/O operations to complete.  For the
complete procedure, see *Note forcing-innodb-recovery::.

If you want all new user-created tables to use the `InnoDB' storage
engine, add the line `default-storage-engine=innodb' to the `[mysqld]'
section of your server option file.


File: manual.info,  Node: innodb-auto-increment-handling,  Next: innodb-foreign-key-constraints,  Prev: converting-tables-to-innodb,  Up: using-innodb-tables

14.3.5.3 `AUTO_INCREMENT' Handling in `InnoDB'
..............................................

* Menu:

* innodb-auto-increment-traditional::  Traditional `InnoDB' Auto-Increment Locking
* innodb-auto-increment-configurable::  Configurable `InnoDB' Auto-Increment Locking

`InnoDB' provides an optimization that significantly improves
scalability and performance of SQL statements that insert rows into
tables with `AUTO_INCREMENT' columns. To use the `AUTO_INCREMENT'
mechanism with an `InnoDB' table, an `AUTO_INCREMENT' column AI_COL
must be defined as part of an index such that it is possible to perform
the equivalent of an indexed `SELECT MAX(AI_COL)' lookup on the table
to obtain the maximum column value. Typically, this is achieved by
making the column the first column of some table index.

This section provides background information on the original
(`traditional') implementation of auto-increment locking in `InnoDB',
explains the configurable locking mechanism, documents the parameter
for configuring the mechanism, and describes its behavior and
interaction with replication.


File: manual.info,  Node: innodb-auto-increment-traditional,  Next: innodb-auto-increment-configurable,  Prev: innodb-auto-increment-handling,  Up: innodb-auto-increment-handling

14.3.5.4 Traditional `InnoDB' Auto-Increment Locking
....................................................

The original implementation of auto-increment handling in `InnoDB' uses
the following strategy to prevent problems when using the binary log
for statement-based replication or for certain recovery scenarios.

If you specify an `AUTO_INCREMENT' column for an `InnoDB' table, the
table handle in the `InnoDB' data dictionary contains a special counter
called the auto-increment counter that is used in assigning new values
for the column. This counter is stored only in main memory, not on disk.

`InnoDB' uses the following algorithm to initialize the auto-increment
counter for a table `t' that contains an `AUTO_INCREMENT' column named
`ai_col': After a server startup, for the first insert into a table `t',
`InnoDB' executes the equivalent of this statement:

     SELECT MAX(ai_col) FROM t FOR UPDATE;

`InnoDB' increments the value retrieved by the statement and assigns it
to the column and to the auto-increment counter for the table. By
default, the value is incremented by one. This default can be
overridden by the `auto_increment_increment' configuration setting.

If the table is empty, `InnoDB' uses the value `1'. This default can be
overridden by the `auto_increment_offset' configuration setting.

If a *Note `SHOW TABLE STATUS': show-table-status. statement examines
the table `t' before the auto-increment counter is initialized, `InnoDB'
initializes but does not increment the value and stores it for use by
later inserts. This initialization uses a normal exclusive-locking read
on the table and the lock lasts to the end of the transaction.

`InnoDB' follows the same procedure for initializing the auto-increment
counter for a freshly created table.

After the auto-increment counter has been initialized, if you do not
explicitly specify a value for an `AUTO_INCREMENT' column, `InnoDB'
increments the counter and assigns the new value to the column. If you
insert a row that explicitly specifies the column value, and the value
is bigger than the current counter value, the counter is set to the
specified column value.

If a user specifies `NULL' or `0' for the `AUTO_INCREMENT' column in an
*Note `INSERT': insert, `InnoDB' treats the row as if the value was not
specified and generates a new value for it.

The behavior of the auto-increment mechanism is not defined if you
assign a negative value to the column, or if the value becomes bigger
than the maximum integer that can be stored in the specified integer
type.

When accessing the auto-increment counter, `InnoDB' uses a special
table-level `AUTO-INC' lock that it keeps to the end of the current SQL
statement, not to the end of the transaction. The special lock release
strategy was introduced to improve concurrency for inserts into a table
containing an `AUTO_INCREMENT' column. Nevertheless, two transactions
cannot have the `AUTO-INC' lock on the same table simultaneously, which
can have a performance impact if the `AUTO-INC' lock is held for a long
time. That might be the case for a statement such as `INSERT INTO t1
... SELECT ... FROM t2' that inserts all rows from one table into
another.

`InnoDB' uses the in-memory auto-increment counter as long as the
server runs. When the server is stopped and restarted, `InnoDB'
reinitializes the counter for each table for the first *Note `INSERT':
insert. to the table, as described earlier.

A server restart also cancels the effect of the `AUTO_INCREMENT = N'
table option in *Note `CREATE TABLE': create-table. and *Note `ALTER
TABLE': alter-table. statements, which you can use with `InnoDB' tables
to set the initial counter value or alter the current counter value.

You may see gaps in the sequence of values assigned to the
`AUTO_INCREMENT' column if you roll back transactions that have
generated numbers using the counter.


File: manual.info,  Node: innodb-auto-increment-configurable,  Prev: innodb-auto-increment-traditional,  Up: innodb-auto-increment-handling

14.3.5.5 Configurable `InnoDB' Auto-Increment Locking
.....................................................

As described in the previous section, `InnoDB' uses a special lock
called the table-level `AUTO-INC' lock for inserts into tables with
`AUTO_INCREMENT' columns. This lock is normally held to the end of the
statement (not to the end of the transaction), to ensure that
auto-increment numbers are assigned in a predictable and repeatable
order for a given sequence of *Note `INSERT': insert. statements.

In the case of statement-based replication, this means that when an SQL
statement is replicated on a slave server, the same values are used for
the auto-increment column as on the master server. The result of
execution of multiple *Note `INSERT': insert. statements is
deterministic, and the slave reproduces the same data as on the master.
If auto-increment values generated by multiple *Note `INSERT': insert.
statements were interleaved, the result of two concurrent *Note
`INSERT': insert. statements would be nondeterministic, and could not
reliably be propagated to a slave server using statement-based
replication.

To make this clear, consider an example that uses this table:

     CREATE TABLE t1 (
       c1 INT(11) NOT NULL AUTO_INCREMENT,
       c2 VARCHAR(10) DEFAULT NULL,
       PRIMARY KEY (c1)
     ) ENGINE=InnoDB;

Suppose that there are two transactions running, each inserting rows
into a table with an `AUTO_INCREMENT' column. One transaction is using
an *Note `INSERT ... SELECT': insert-select. statement that inserts
1000 rows, and another is using a simple *Note `INSERT': insert.
statement that inserts one row:

     Tx1: INSERT INTO t1 (c2) SELECT 1000 rows from another table ...
     Tx2: INSERT INTO t1 (c2) VALUES ('xxx');

`InnoDB' cannot tell in advance how many rows will be retrieved from
the *Note `SELECT': select.  in the *Note `INSERT': insert. statement
in Tx1, and it assigns the auto-increment values one at a time as the
statement proceeds. With a table-level lock, held to the end of the
statement, only one *Note `INSERT': insert.  statement referring to
table `t1' can execute at a time, and the generation of auto-increment
numbers by different statements is not interleaved. The auto-increment
value generated by the Tx1 *Note `INSERT ... SELECT': insert-select.
statement will be consecutive, and the (single) auto-increment value
used by the *Note `INSERT': insert. statement in Tx2 will either be
smaller or larger than all those used for Tx1, depending on which
statement executes first.

As long as the SQL statements execute in the same order when replayed
from the binary log (when using statement-based replication, or in
recovery scenarios), the results will be the same as they were when Tx1
and Tx2 first ran. Thus, table-level locks held until the end of a
statement make *Note `INSERT': insert. statements using auto-increment
safe for use with statement-based replication.  However, those locks
limit concurrency and scalability when multiple transactions are
executing insert statements at the same time.

In the preceding example, if there were no table-level lock, the value
of the auto-increment column used for the *Note `INSERT': insert. in
Tx2 depends on precisely when the statement executes. If the *Note
`INSERT': insert. of Tx2 executes while the *Note `INSERT': insert. of
Tx1 is running (rather than before it starts or after it completes),
the specific auto-increment values assigned by the two *Note `INSERT':
insert. statements are nondeterministic, and may vary from run to run.

`InnoDB' can avoid using the table-level `AUTO-INC' lock for a class of
*Note `INSERT': insert. statements where the number of rows is known in
advance, and still preserve deterministic execution and safety for
statement-based replication. Further, if you are not using the binary
log to replay SQL statements as part of recovery or replication, you
can entirely eliminate use of the table-level `AUTO-INC' lock for even
greater concurrency and performance, at the cost of permitting gaps in
auto-increment numbers assigned by a statement and potentially having
the numbers assigned by concurrently executing statements interleaved.

For *Note `INSERT': insert. statements where the number of rows to be
inserted is known at the beginning of processing the statement,
`InnoDB' quickly allocates the required number of auto-increment values
without taking any lock, but only if there is no concurrent session
already holding the table-level `AUTO-INC' lock (because that other
statement will be allocating auto-increment values one-by-one as it
proceeds). More precisely, such an *Note `INSERT': insert. statement
obtains auto-increment values under the control of a mutex (a
light-weight lock) that is _not_ held until the statement completes,
but only for the duration of the allocation process.

This new locking scheme enables much greater scalability, but it does
introduce some subtle differences in how auto-increment values are
assigned compared to the original mechanism. To describe the way
auto-increment works in `InnoDB', the following discussion defines some
terms, and explains how `InnoDB' behaves using different settings of the
`innodb_autoinc_lock_mode' configuration parameter, which you can set
at server startup.  Additional considerations are described following
the explanation of auto-increment locking behavior.

First, some definitions:

   * `*Note `INSERT': insert.-like' statements

     All statements that generate new rows in a table, including *Note
     `INSERT': insert, *Note `INSERT ... SELECT': insert-select, *Note
     `REPLACE': replace, *Note `REPLACE ... SELECT': replace, and *Note
     `LOAD DATA': load-data.

   * `Simple inserts'

     Statements for which the number of rows to be inserted can be
     determined in advance (when the statement is initially processed).
     This includes single-row and multiple-row *Note `INSERT': insert.
     and *Note `REPLACE': replace. statements that do not have a nested
     subquery, but not *Note `INSERT ... ON DUPLICATE KEY UPDATE':
     insert-on-duplicate.

   * `Bulk inserts'

     Statements for which the number of rows to be inserted (and the
     number of required auto-increment values) is not known in advance.
     This includes *Note `INSERT ... SELECT': insert-select, *Note
     `REPLACE ... SELECT': replace, and *Note `LOAD DATA': load-data.
     statements, but not plain `INSERT'. `InnoDB' will assign new
     values for the `AUTO_INCREMENT' column one at a time as each row
     is processed.

   * `Mixed-mode inserts'

     These are `simple insert' statements that specify the
     auto-increment value for some (but not all) of the new rows. An
     example follows, where `c1' is an `AUTO_INCREMENT' column of table
     `t1':

          INSERT INTO t1 (c1,c2) VALUES (1,'a'), (NULL,'b'), (5,'c'), (NULL,'d');

     Another type of `mixed-mode insert' is *Note `INSERT ... ON
     DUPLICATE KEY UPDATE': insert-on-duplicate, which in the worst
     case is in effect an *Note `INSERT': insert.  followed by a *Note
     `UPDATE': update, where the allocated value for the
     `AUTO_INCREMENT' column may or may not be used during the update
     phase.

There are three possible settings for the `innodb_autoinc_lock_mode'
parameter:

   * `innodb_autoinc_lock_mode = 0' (`traditional' lock mode)

     This lock mode provides the same behavior as before
     `innodb_autoinc_lock_mode' existed. For all `*Note `INSERT':
     insert.-like' statements, a special table-level `AUTO-INC' lock is
     obtained and held to the end of the statement. This assures that
     the auto-increment values assigned by any given statement are
     consecutive.

     This lock mode is provided for:

        * Backward compatibility.

        * Performance testing.

        * Working around issues with `mixed-mode inserts', due to the
          possible differences in semantics described later.

   * `innodb_autoinc_lock_mode = 1' (`consecutive' lock mode)

     This is the default lock mode. In this mode, `bulk inserts' use
     the special `AUTO-INC' table-level lock and hold it until the end
     of the statement.  This applies to all *Note `INSERT ... SELECT':
     insert-select, *Note `REPLACE ... SELECT': replace, and *Note
     `LOAD DATA': load-data. statements. Only one statement holding the
     `AUTO-INC' lock can execute at a time.

     With this lock mode, `simple inserts' (only) use a new locking
     model where a light-weight mutex is used during the allocation of
     auto-increment values, and no table-level `AUTO-INC' lock is used,
     unless an `AUTO-INC' lock is held by another transaction. If
     another transaction does hold an `AUTO-INC' lock, a `simple
     insert' waits for the `AUTO-INC' lock, as if it too were a `bulk
     insert'.

     This lock mode ensures that, in the presence of *Note `INSERT':
     insert. statements where the number of rows is not known in
     advance (and where auto-increment numbers are assigned as the
     statement progresses), all auto-increment values assigned by any
     `*Note `INSERT': insert.-like' statement are consecutive, and
     operations are safe for statement-based replication.

     Simply put, the important impact of this lock mode is
     significantly better scalability. This mode is safe for use with
     statement-based replication. Further, as with `traditional' lock
     mode, auto-increment numbers assigned by any given statement are
     _consecutive_. In this mode, there is _no change_ in semantics
     compared to `traditional' mode for any statement that uses
     auto-increment, with one important exception.

     The exception is for `mixed-mode inserts', where the user provides
     explicit values for an `AUTO_INCREMENT' column for some, but not
     all, rows in a multiple-row `simple insert'.  For such inserts,
     `InnoDB' will allocate more auto-increment values than the number
     of rows to be inserted. However, all values automatically assigned
     are consecutively generated (and thus higher than) the
     auto-increment value generated by the most recently executed
     previous statement. `Excess' numbers are lost.

   * `innodb_autoinc_lock_mode = 2' (`interleaved' lock mode)

     In this lock mode, no `*Note `INSERT': insert.-like' statements
     use the table-level `AUTO-INC' lock, and multiple statements can
     execute at the same time.  This is the fastest and most scalable
     lock mode, but it is _not safe_ when using statement-based
     replication or recovery scenarios when SQL statements are replayed
     from the binary log.

     In this lock mode, auto-increment values are guaranteed to be
     unique and monotonically increasing across all concurrently
     executing `*Note `INSERT': insert.-like' statements. However,
     because multiple statements can be generating numbers at the same
     time (that is, allocation of numbers is _interleaved_ across
     statements), the values generated for the rows inserted by any
     given statement may not be consecutive.

     If the only statements executing are `simple inserts' where the
     number of rows to be inserted is known ahead of time, there will
     be no gaps in the numbers generated for a single statement, except
     for `mixed-mode inserts'. However, when `bulk inserts' are
     executed, there may be gaps in the auto-increment values assigned
     by any given statement.

The auto-increment locking modes provided by `innodb_autoinc_lock_mode'
have several usage implications:

   * Using auto-increment with replication

     If you are using statement-based replication, set
     `innodb_autoinc_lock_mode' to 0 or 1 and use the same value on the
     master and its slaves.  Auto-increment values are not ensured to
     be the same on the slaves as on the master if you use
     `innodb_autoinc_lock_mode' = 2 (`interleaved') or configurations
     where the master and slaves do not use the same lock mode.

     If you are using row-based replication, all of the auto-increment
     lock modes are safe. Row-based replication is not sensitive to the
     order of execution of the SQL statements.

   * `Lost' auto-increment values and sequence gaps

     In all lock modes (0, 1, and 2), if a transaction that generated
     auto-increment values rolls back, those auto-increment values are
     `lost'. Once a value is generated for an auto-increment column, it
     cannot be rolled back, whether or not the `*Note `INSERT':
     insert.-like' statement is completed, and whether or not the
     containing transaction is rolled back. Such lost values are not
     reused.  Thus, there may be gaps in the values stored in an
     `AUTO_INCREMENT' column of a table.

   * Gaps in auto-increment values for `bulk inserts'

     With `innodb_autoinc_lock_mode' set to 0 (`traditional') or 1
     (`consecutive'), the auto-increment values generated by any given
     statement will be consecutive, without gaps, because the
     table-level `AUTO-INC' lock is held until the end of the
     statement, and only one such statement can execute at a time.

     With `innodb_autoinc_lock_mode' set to 2 (`interleaved'), there
     may be gaps in the auto-increment values generated by `bulk
     inserts,' but only if there are concurrently executing `*Note
     `INSERT': insert.-like' statements.

     For lock modes 1 or 2, gaps may occur between successive
     statements because for bulk inserts the exact number of
     auto-increment values required by each statement may not be known
     and overestimation is possible.

   * Auto-increment values assigned by `mixed-mode inserts'

     Consider a `mixed-mode insert,' where a `simple insert' specifies
     the auto-increment value for some (but not all) resulting rows.
     Such a statement will behave differently in lock modes 0, 1, and 2.
     For example, assume `c1' is an `AUTO_INCREMENT' column of table
     `t1', and that the most recent automatically generated sequence
     number is 100. Consider the following `mixed-mode insert'
     statement:

          INSERT INTO t1 (c1,c2) VALUES (1,'a'), (NULL,'b'), (5,'c'), (NULL,'d');

     With `innodb_autoinc_lock_mode' set to 0 (`traditional'), the four
     new rows will be:

          +-----+------+
          | c1  | c2   |
          +-----+------+
          |   1 | a    |
          | 101 | b    |
          |   5 | c    |
          | 102 | d    |
          +-----+------+

     The next available auto-increment value will be 103 because the
     auto-increment values are allocated one at a time, not all at once
     at the beginning of statement execution. This result is true
     whether or not there are concurrently executing `*Note `INSERT':
     insert.-like' statements (of any type).

     With `innodb_autoinc_lock_mode' set to 1 (`consecutive'), the four
     new rows will also be:

          +-----+------+
          | c1  | c2   |
          +-----+------+
          |   1 | a    |
          | 101 | b    |
          |   5 | c    |
          | 102 | d    |
          +-----+------+

     However, in this case, the next available auto-increment value
     will be 105, not 103 because four auto-increment values are
     allocated at the time the statement is processed, but only two are
     used. This result is true whether or not there are concurrently
     executing `*Note `INSERT': insert.-like' statements (of any type).

     With `innodb_autoinc_lock_mode' set to mode 2 (`interleaved'), the
     four new rows will be:

          +-----+------+
          | c1  | c2   |
          +-----+------+
          |   1 | a    |
          |   X | b    |
          |   5 | c    |
          |   Y | d    |
          +-----+------+

     The values of X and Y will be unique and larger than any
     previously generated rows. However, the specific values of X and Y
     will depend on the number of auto-increment values generated by
     concurrently executing statements.

     Finally, consider the following statement, issued when the
     most-recently generated sequence number was the value 4:

          INSERT INTO t1 (c1,c2) VALUES (1,'a'), (NULL,'b'), (5,'c'), (NULL,'d');

     With any `innodb_autoinc_lock_mode' setting, this statement will
     generate a duplicate-key error 23000 (`Can't write; duplicate key
     in table') because 5 will be allocated for the row `(NULL, 'b')'
     and insertion of the row `(5, 'c')' will fail.


File: manual.info,  Node: innodb-foreign-key-constraints,  Next: innodb-and-mysql-replication,  Prev: innodb-auto-increment-handling,  Up: using-innodb-tables

14.3.5.6 `InnoDB' and `FOREIGN KEY' Constraints
...............................................

This section describes differences in the InnoDB storage engine'
handling of foreign keys as compared with that of the MySQL Server.

* Foreign Key Definitions *

Foreign key definitions for `InnoDB' tables are subject to the
following conditions:

   * `InnoDB' permits a foreign key to reference any index column or
     group of columns. However, in the referenced table, there must be
     an index where the referenced columns are listed as the _first_
     columns in the same order.

   * *Note `InnoDB': innodb-storage-engine. does not currently support
     foreign keys for tables with user-defined partitioning. This means
     that no user-partitioned `InnoDB' table may contain foreign key
     references or columns referenced by foreign keys.

   * `InnoDB' allows a foreign key constraint to reference a non-unique
     key. _This is an `InnoDB' extension to standard SQL._

* Referential Actions *

Referential actions for foreign keys of `InnoDB' tables are subject to
the following conditions:

   * While `SET DEFAULT' is allowed by the MySQL Server, it is rejected
     as invalid by `InnoDB'. *Note `CREATE TABLE': create-table. and
     *Note `ALTER TABLE': alter-table.  statements using this clause
     are not allowed for InnoDB tables.

   * If there are several rows in the parent table that have the same
     referenced key value, `InnoDB' acts in foreign key checks as if
     the other parent rows with the same key value do not exist. For
     example, if you have defined a `RESTRICT' type constraint, and
     there is a child row with several parent rows, `InnoDB' does not
     permit the deletion of any of those parent rows.

   * `InnoDB' performs cascading operations through a depth-first
     algorithm, based on records in the indexes corresponding to the
     foreign key constraints.

   * If `ON UPDATE CASCADE' or `ON UPDATE SET NULL' recurses to update
     the _same table_ it has previously updated during the cascade, it
     acts like `RESTRICT'. This means that you cannot use
     self-referential `ON UPDATE CASCADE' or `ON UPDATE SET NULL'
     operations. This is to prevent infinite loops resulting from
     cascaded updates. A self-referential `ON DELETE SET NULL', on the
     other hand, is possible, as is a self-referential `ON DELETE
     CASCADE'.  Cascading operations may not be nested more than 15
     levels deep.

   * Like MySQL in general, in an SQL statement that inserts, deletes,
     or updates many rows, `InnoDB' checks `UNIQUE' and `FOREIGN KEY'
     constraints row-by-row. When performing foreign key checks,
     `InnoDB' sets shared row-level locks on child or parent records it
     has to look at.  `InnoDB' checks foreign key constraints
     immediately; the check is not deferred to transaction commit.
     According to the SQL standard, the default behavior should be
     deferred checking. That is, constraints are only checked after the
     _entire SQL statement_ has been processed. Until `InnoDB'
     implements deferred constraint checking, some things will be
     impossible, such as deleting a record that refers to itself using
     a foreign key.

* Foreign Key Usage and Error Information *

You can obtain general information about foreign keys and their usage
from querying the *Note `INFORMATION_SCHEMA.KEY_COLUMN_USAGE':
key-column-usage-table.  table. See also *Note
create-table-foreign-keys::.

In addition to *Note `SHOW ERRORS': show-errors, in the event of a
foreign key error involving `InnoDB' tables (usually Error 150 in the
MySQL Server), you can obtain a detailed explanation of the most recent
`InnoDB' foreign key error by checking the output of *Note `SHOW ENGINE
INNODB STATUS': show-engine.


File: manual.info,  Node: innodb-and-mysql-replication,  Prev: innodb-foreign-key-constraints,  Up: using-innodb-tables

14.3.5.7 `InnoDB' and MySQL Replication
.......................................

MySQL replication works for `InnoDB' tables as it does for `MyISAM'
tables. It is also possible to use replication in a way where the
storage engine on the slave is not the same as the original storage
engine on the master. For example, you can replicate modifications to an
`InnoDB' table on the master to a `MyISAM' table on the slave.

To set up a new slave for a master, make a copy of the `InnoDB'
tablespace and the log files, as well as the `.frm' files of the
`InnoDB' tables, and move the copies to the slave. If the
`innodb_file_per_table' option is enabled, copy the `.ibd' files as
well. For the proper procedure to do this, see *Note innodb-backup::.

To make a new slave without taking down the master or an existing
slave, use the *Note MySQL Enterprise Backup: mysql-enterprise-backup.
product. If you can shut down the master or an existing slave, take a
cold backup of the `InnoDB' tablespaces and log files and use that to
set up a slave.

Transactions that fail on the master do not affect replication at all.
MySQL replication is based on the binary log where MySQL writes SQL
statements that modify data. A transaction that fails (for example,
because of a foreign key violation, or because it is rolled back) is
not written to the binary log, so it is not sent to slaves.  See *Note
commit::.

Replication and `CASCADE'

Cascading actions for `InnoDB' tables on the master are replicated on
the slave _only_ if the tables sharing the foreign key relation use
`InnoDB' on both the master and slave. This is true whether you are
using statement-based or row-based replication. Suppose that you have
started replication, and then create two tables on the master using the
following *Note `CREATE TABLE': create-table. statements:

     CREATE TABLE fc1 (
         i INT PRIMARY KEY,
         j INT
     ) ENGINE = InnoDB;

     CREATE TABLE fc2 (
         m INT PRIMARY KEY,
         n INT,
         FOREIGN KEY ni (n) REFERENCES fc1 (i)
             ON DELETE CASCADE
     ) ENGINE = InnoDB;

Suppose that the slave does not have `InnoDB' support enabled. If this
is the case, then the tables on the slave are created, but they use the
`MyISAM' storage engine, and the `FOREIGN KEY' option is ignored.  Now
we insert some rows into the tables on the master:

     master> INSERT INTO fc1 VALUES (1, 1), (2, 2);
     Query OK, 2 rows affected (0.09 sec)
     Records: 2  Duplicates: 0  Warnings: 0

     master> INSERT INTO fc2 VALUES (1, 1), (2, 2), (3, 1);
     Query OK, 3 rows affected (0.19 sec)
     Records: 3  Duplicates: 0  Warnings: 0

At this point, on both the master and the slave, table `fc1' contains 2
rows, and table `fc2' contains 3 rows, as shown here:

     master> SELECT * FROM fc1;
     +---+------+
     | i | j    |
     +---+------+
     | 1 |    1 |
     | 2 |    2 |
     +---+------+
     2 rows in set (0.00 sec)

     master> SELECT * FROM fc2;
     +---+------+
     | m | n    |
     +---+------+
     | 1 |    1 |
     | 2 |    2 |
     | 3 |    1 |
     +---+------+
     3 rows in set (0.00 sec)

     slave> SELECT * FROM fc1;
     +---+------+
     | i | j    |
     +---+------+
     | 1 |    1 |
     | 2 |    2 |
     +---+------+
     2 rows in set (0.00 sec)

     slave> SELECT * FROM fc2;
     +---+------+
     | m | n    |
     +---+------+
     | 1 |    1 |
     | 2 |    2 |
     | 3 |    1 |
     +---+------+
     3 rows in set (0.00 sec)

Now suppose that you perform the following *Note `DELETE': delete.
statement on the master:

     master> DELETE FROM fc1 WHERE i=1;
     Query OK, 1 row affected (0.09 sec)

Due to the cascade, table `fc2' on the master now contains only 1 row:

     master> SELECT * FROM fc2;
     +---+---+
     | m | n |
     +---+---+
     | 2 | 2 |
     +---+---+
     1 row in set (0.00 sec)

However, the cascade does not propagate on the slave because on the
slave the *Note `DELETE': delete. for `fc1' deletes no rows from `fc2'.
The slave's copy of `fc2' still contains all of the rows that were
originally inserted:

     slave> SELECT * FROM fc2;
     +---+---+
     | m | n |
     +---+---+
     | 1 | 1 |
     | 3 | 1 |
     | 2 | 2 |
     +---+---+
     3 rows in set (0.00 sec)

This difference is due to the fact that the cascading deletes are
handled internally by the `InnoDB' storage engine, which means that
none of the changes are logged.


File: manual.info,  Node: innodb-data-log-reconfiguration,  Next: innodb-backup,  Prev: using-innodb-tables,  Up: innodb-storage-engine

14.3.6 Adding, Removing, or Resizing `InnoDB' Data and Log Files
----------------------------------------------------------------

This section describes what you can do when your `InnoDB' system
tablespace runs out of room or when you want to change the size of the
redo log files.

The easiest way to increase the size of the `InnoDB' system tablespace
is to configure it from the beginning to be auto-extending. Specify the
`autoextend' attribute for the last data file in the tablespace
definition. Then `InnoDB' increases the size of that file automatically
in 8MB increments when it runs out of space. The increment size can be
changed by setting the value of the `innodb_autoextend_increment'
system variable, which is measured in megabytes.

Alternatively, you can increase the size of your tablespace by adding
another data file. To do this, you have to shut down the MySQL server,
change the tablespace configuration to add a new data file to the end of
`innodb_data_file_path', and start the server again.

If your last data file was defined with the keyword `autoextend', the
procedure for reconfiguring the tablespace must take into account the
size to which the last data file has grown. Obtain the size of the data
file, round it down to the closest multiple of 1024 x 1024 bytes (=
1MB), and specify the rounded size explicitly in
`innodb_data_file_path'. Then you can add another data file. Remember
that only the last data file in the `innodb_data_file_path' can be
specified as auto-extending.

For example, this tablespace has just one auto-extending data file
`ibdata1':

     innodb_data_home_dir =
     innodb_data_file_path = /ibdata/ibdata1:10M:autoextend

Suppose that this data file, over time, has grown to 988MB. Here is the
configuration line after modifying the original data file to use a
fixed size and adding a new auto-extending data file:

     innodb_data_home_dir =
     innodb_data_file_path = /ibdata/ibdata1:988M;/disk2/ibdata2:50M:autoextend

When you add a new data file to the system tablespace configuration,
make sure that the filename does not refer to an existing file.
`InnoDB' creates and initializes the file when you restart the server.

Currently, you cannot remove a data file from the system tablespace.
To decrease the system tablespace size, use this procedure:

  1. Use *Note `mysqldump': mysqldump. to dump all your `InnoDB' tables.

  2. Stop the server.

  3. Remove all the existing tablespace files, including the `ibdata'
     and `ib_log' files. If you want to keep a backup copy of the
     information, then copy all the `ib*' files to another location
     before the removing the files in your MySQL installation.

  4. Remove any `.frm' files for `InnoDB' tables.

  5. Configure a new tablespace.

  6. Restart the server.

  7. Import the dump files.

If you want to change the number or the size of your `InnoDB' log
files, use the following instructions.  The procedure to use depends on
the value of `innodb_fast_shutdown':

   * If `innodb_fast_shutdown' is not set to 2: Stop the MySQL server
     and make sure that it shuts down without errors (to ensure that
     there is no information for outstanding transactions in the log).
     Copy the old log files into a safe place in case something went
     wrong during the shutdown and you need them to recover the
     tablespace. Delete the old log files from the log file directory,
     edit `my.cnf' to change the log file configuration, and start the
     MySQL server again.  *Note `mysqld': mysqld. sees that no *Note
     `InnoDB': innodb-storage-engine. log files exist at startup and
     creates new ones.

   * If `innodb_fast_shutdown' is set to 2: Set `innodb_fast_shutdown'
     to 1:

          mysql> SET GLOBAL innodb_fast_shutdown = 1;

     Then follow the instructions in the previous item.


File: manual.info,  Node: innodb-backup,  Next: innodb-migration,  Prev: innodb-data-log-reconfiguration,  Up: innodb-storage-engine

14.3.7 Backing Up and Recovering an `InnoDB' Database
-----------------------------------------------------

* Menu:

* innodb-recovery::              The `InnoDB' Recovery Process
* forcing-innodb-recovery::      Forcing `InnoDB' Recovery
* innodb-checkpoints::           `InnoDB' Checkpoints

The key to safe database management is making regular backups.
Depending on your data volume, number of MySQL servers, and database
workload, you can use these techniques, alone or in combination: hot
backup with MySQL Enterprise Backup; cold backup by copying files while
the MySQL server is shut down; physical backup for fast operation
(especially for restore); logical backup with *Note `mysqldump':
mysqldump. for smaller data volumes or to record the structure of
schema objects.

* Hot Backups *

The `mysqlbackup' command, part of the MySQL Enterprise Backup
component, lets you back up a running MySQL instance, including
`InnoDB' and *Note `MyISAM': myisam-storage-engine. tables, with
minimal disruption to operations while producing a consistent snapshot
of the database.  When `mysqlbackup' is copying `InnoDB' tables, reads
and writes to both `InnoDB' and `MyISAM' tables can continue. During
the copying of `MyISAM' tables, reads (but not writes) to those tables
are permitted. MySQL Enterprise Backup can also create compressed
backup files, and back up subsets of tables and databases. In
conjunction with MySQL's binary log, users can perform point-in-time
recovery. MySQL Enterprise Backup is part of the MySQL Enterprise
subscription. For more details, see *Note mysql-enterprise-backup::.

* Cold Backups *

If you can shut down your MySQL server, you can make a binary backup
that consists of all files used by `InnoDB' to manage its tables. Use
the following procedure:

  1. Do a slow shutdown of the MySQL server and make sure that it stops
     without errors.

  2. Copy all `InnoDB' data files (`ibdata' files and `.ibd' files)
     into a safe place.

  3. Copy all the `.frm' files for `InnoDB' tables to a safe place.

  4. Copy all `InnoDB' log files (`ib_logfile' files) to a safe place.

  5. Copy your `my.cnf' configuration file or files to a safe place.

* Alternative Backup Types *

In addition to making binary backups as just described, regularly make
dumps of your tables with *Note `mysqldump': mysqldump. A binary file
might be corrupted without you noticing it. Dumped tables are stored
into text files that are human-readable, so spotting table corruption
becomes easier. Also, because the format is simpler, the chance for
serious data corruption is smaller.  *Note `mysqldump': mysqldump. also
has a `--single-transaction' option for making a consistent snapshot
without locking out other clients. See *Note backup-policy::.

Replication works with *Note `InnoDB': innodb-storage-engine. tables,
so you can use MySQL replication capabilities to keep a copy of your
database at database sites requiring high availability.

* Performing Recovery *

To recover your `InnoDB' database to the present from the time at which
the binary backup was made, you must run your MySQL server with binary
logging turned on, even before taking the backup. To achieve
point-in-time recovery after restoring a backup, you can apply changes
from the binary log that occurred after the backup was made. See *Note
point-in-time-recovery::.

To recover from a crash of your MySQL server, the only requirement is
to restart it. `InnoDB' automatically checks the logs and performs a
roll-forward of the database to the present.  `InnoDB' automatically
rolls back uncommitted transactions that were present at the time of
the crash. During recovery, *Note `mysqld': mysqld. displays output
something like this:

     InnoDB: Database was not shut down normally.
     InnoDB: Starting recovery from log files...
     InnoDB: Starting log scan based on checkpoint at
     InnoDB: log sequence number 0 13674004
     InnoDB: Doing recovery: scanned up to log sequence number 0 13739520
     InnoDB: Doing recovery: scanned up to log sequence number 0 13805056
     InnoDB: Doing recovery: scanned up to log sequence number 0 13870592
     InnoDB: Doing recovery: scanned up to log sequence number 0 13936128
     ...
     InnoDB: Doing recovery: scanned up to log sequence number 0 20555264
     InnoDB: Doing recovery: scanned up to log sequence number 0 20620800
     InnoDB: Doing recovery: scanned up to log sequence number 0 20664692
     InnoDB: 1 uncommitted transaction(s) which must be rolled back
     InnoDB: Starting rollback of uncommitted transactions
     InnoDB: Rolling back trx no 16745
     InnoDB: Rolling back of trx no 16745 completed
     InnoDB: Rollback of uncommitted transactions completed
     InnoDB: Starting an apply batch of log records to the database...
     InnoDB: Apply batch completed
     InnoDB: Started
     mysqld: ready for connections

If your database becomes corrupted or disk failure occurs, you must
perform the recovery using a backup. In the case of corruption, first
find a backup that is not corrupted. After restoring the base backup,
do a point-in-time recovery from the binary log files using *Note
`mysqlbinlog': mysqlbinlog. and *Note `mysql': mysql. to restore the
changes that occurred after the backup was made.

In some cases of database corruption, it is enough just to dump, drop,
and re-create one or a few corrupt tables. You can use the *Note `CHECK
TABLE': check-table. SQL statement to check whether a table is corrupt,
although *Note `CHECK TABLE': check-table. naturally cannot detect
every possible kind of corruption. You can use the Tablespace Monitor
to check the integrity of the file space management inside the
tablespace files.

In some cases, apparent database page corruption is actually due to the
operating system corrupting its own file cache, and the data on disk
may be okay. It is best first to try restarting your computer.  Doing
so may eliminate errors that appeared to be database page corruption.
If MySQL still has trouble starting because of `InnoDB' consistency
problems, see *Note forcing-innodb-recovery:: for steps to start the
instance in a diagnostic mode where you can dump the data.


File: manual.info,  Node: innodb-recovery,  Next: forcing-innodb-recovery,  Prev: innodb-backup,  Up: innodb-backup

14.3.7.1 The `InnoDB' Recovery Process
......................................

`InnoDB' crash recovery consists of several steps. The first step, redo
log application, is performed during the initialization, before
accepting any connections. If all changes were flushed from the buffer
pool to the tablespaces (`ibdata*' and `*.ibd' files) at the time of
the shutdown or crash, the redo log application can be skipped. If the
redo log files are missing at startup, `InnoDB' skips the redo log
application.

The remaining steps after redo log application do not depend on the
redo log (other than for logging the writes) and are performed in
parallel with normal processing. These include:

   * Rolling back incomplete transactions: Any transactions that were
     active at the time of crash or fast shutdown.

   * Insert buffer merge: Applying changes from the insert buffer tree
     (from the shared tablespace) to leaf pages of secondary indexes as
     the index pages are read to the buffer pool.

   * Purge: Deleting delete-marked records that are no longer visible
     for any active transaction.

Of these, only rollback of incomplete transactions is special to crash
recovery. The insert buffer merge and the purge are performed during
normal processing.


File: manual.info,  Node: forcing-innodb-recovery,  Next: innodb-checkpoints,  Prev: innodb-recovery,  Up: innodb-backup

14.3.7.2 Forcing `InnoDB' Recovery
..................................

If there is database page corruption, you may want to dump your tables
from the database with *Note `SELECT ... INTO OUTFILE': select-into.
Usually, most of the data obtained in this way is intact. However, it
is possible that the corruption might cause `SELECT * FROM TBL_NAME'
statements or `InnoDB' background operations to crash or assert, or
even cause `InnoDB' roll-forward recovery to crash. In such cases, you
can use the `innodb_force_recovery' option to force the `InnoDB'
storage engine to start up while preventing background operations from
running, so that you can dump your tables. For example, you can add the
following line to the `[mysqld]' section of your option file before
restarting the server:

     [mysqld]
     innodb_force_recovery = 4

`innodb_force_recovery' is 0 by default (normal startup without forced
recovery). The permissible nonzero values for `innodb_force_recovery'
follow. A larger number includes all precautions of smaller numbers. If
you can dump your tables with an option value of at most 4, then you
are relatively safe that only some data on corrupt individual pages is
lost. A value of 6 is more drastic because database pages are left in
an obsolete state, which in turn may introduce more corruption into
B-trees and other database structures.

   * `1' (`SRV_FORCE_IGNORE_CORRUPT')

     Let the server run even if it detects a corrupt page. Try to make
     `SELECT * FROM TBL_NAME' jump over corrupt index records and
     pages, which helps in dumping tables.

   * `2' (`SRV_FORCE_NO_BACKGROUND')

     Prevent the master thread from running. If a crash would occur
     during the purge operation, this recovery value prevents it.

   * `3' (`SRV_FORCE_NO_TRX_UNDO')

     Do not run transaction rollbacks after crash recovery.

   * `4' (`SRV_FORCE_NO_IBUF_MERGE')

     Prevent insert buffer merge operations. If they would cause a
     crash, do not do them. Do not calculate table statistics.

   * `5' (`SRV_FORCE_NO_UNDO_LOG_SCAN')

     Do not look at undo logs when starting the database: `InnoDB'
     treats even incomplete transactions as committed.

   * `6' (`SRV_FORCE_NO_LOG_REDO')

     Do not do the redo log roll-forward in connection with recovery.

     With this value, you might not be able to do queries other than a
     basic `SELECT * FROM t', with no `WHERE', `ORDER BY', or other
     clauses. More complex queries could encounter corrupted data
     structures and fail.

     If corruption within the table data prevents you from dumping the
     entire table contents, a query with an `ORDER BY PRIMARY_KEY DESC'
     clause might be able to dump the portion of the table after the
     corrupted part.

_The database must not otherwise be used with any nonzero value of
`innodb_force_recovery'_.  As a safety measure, `InnoDB' prevents users
from performing *Note `INSERT': insert, *Note `UPDATE': update, or
*Note `DELETE': delete. operations when `innodb_force_recovery' is
greater than 0.

You can *Note `SELECT': select. from tables to dump them, or `DROP' or
`CREATE' tables even if forced recovery is used. If you know that a
given table is causing a crash on rollback, you can drop it. You can
also use this to stop a runaway rollback caused by a failing mass
import or *Note `ALTER TABLE': alter-table. You can kill the *Note
`mysqld': mysqld. process and set `innodb_force_recovery' to `3' to
bring the database up without the rollback, then `DROP' the table that
is causing the runaway rollback.


File: manual.info,  Node: innodb-checkpoints,  Prev: forcing-innodb-recovery,  Up: innodb-backup

14.3.7.3 `InnoDB' Checkpoints
.............................

Making your log files very large may reduce disk I/O during
checkpointing. It often makes sense to set the total size of the log
files as large as the buffer pool or even larger. Although in the past
large log files could make crash recovery take excessive time, starting
with MySQL 5.5, performance enhancements to crash recovery make it
possible to use large log files with fast startup after a crash.
(Strictly speaking, this performance improvement is available for MySQL
5.1 with the InnoDB Plugin 1.0.7 and higher. It is with MySQL 5.5 and
InnoDB 1.1 that this improvement is available in the default InnoDB
storage engine.)

* How Checkpoint Processing Works *

`InnoDB' implements a checkpoint mechanism known as `fuzzy'
checkpointing. `InnoDB' flushes modified database pages from the buffer
pool in small batches. There is no need to flush the buffer pool in one
single batch, which would in practice stop processing of user SQL
statements during the checkpointing process.

During crash recovery, `InnoDB' looks for a checkpoint label written to
the log files. It knows that all modifications to the database before
the label are present in the disk image of the database. Then `InnoDB'
scans the log files forward from the checkpoint, applying the logged
modifications to the database.

`InnoDB' writes to its log files on a rotating basis. It also writes
checkpoint information to the first log file at each checkpoint. All
committed modifications that make the database pages in the buffer pool
different from the images on disk must be available in the log files in
case `InnoDB' has to do a recovery. This means that when `InnoDB'
starts to reuse a log file, it has to make sure that the database page
images on disk contain the modifications logged in the log file that
`InnoDB' is going to reuse. In other words, `InnoDB' must create a
checkpoint and this often involves flushing of modified database pages
to disk.


File: manual.info,  Node: innodb-migration,  Next: innodb-transaction-model,  Prev: innodb-backup,  Up: innodb-storage-engine

14.3.8 Moving or Copying `InnoDB' Tables to Another Machine
-----------------------------------------------------------

This section explains various techniques for moving or copying some or
all `InnoDB' tables to a different server. For example, you might move
an entire MySQL instance to a larger, faster server; you might clone an
entire MySQL instance to a new replication slave server; you might copy
individual tables to another server to development and test an
application, or to a data warehouse server to produce reports.

On Windows, `InnoDB' always stores database and table names internally
in lowercase. To move databases in a binary format from Unix to Windows
or from Windows to Unix, create all databases and tables using
lowercase names. A convenient way to accomplish this is to add the
following line to the `[mysqld]' section of your `my.cnf' or `my.ini'
file before creating any databases or tables:

     [mysqld]
     lower_case_table_names=1

Like `MyISAM' data files, `InnoDB' data and log files are
binary-compatible on all platforms having the same floating-point
number format. You can move an `InnoDB' database simply by copying all
the relevant files listed in *Note innodb-backup::. If the
floating-point formats differ but you have not used *Note `FLOAT':
floating-point-types. or *Note `DOUBLE': floating-point-types. data
types in your tables, then the procedure is the same: simply copy the
relevant files. If you use *Note `mysqldump': mysqldump. to dump your
tables on one machine and then import the dump files on the other
machine, it does not matter whether the formats differ or your tables
contain floating-point data.

One way to increase performance is to switch off autocommit mode when
importing data, assuming that the tablespace has enough space for the
big rollback segment that the import transactions generate.  Do the
commit only after importing a whole table or a segment of a table.


File: manual.info,  Node: innodb-transaction-model,  Next: innodb-multi-versioning,  Prev: innodb-migration,  Up: innodb-storage-engine

14.3.9 The `InnoDB' Transaction Model and Locking
-------------------------------------------------

* Menu:

* innodb-lock-modes::            `InnoDB' Lock Modes
* innodb-consistent-read::       Consistent Nonlocking Reads
* innodb-locking-reads::         `SELECT ... FOR UPDATE' and `SELECT ... LOCK IN SHARE MODE' Locking Reads
* innodb-record-level-locks::    `InnoDB' Record, Gap, and Next-Key Locks
* innodb-next-key-locking::      Avoiding the Phantom Problem Using Next-Key Locking
* innodb-locks-set::             Locks Set by Different SQL Statements in `InnoDB'
* innodb-implicit-commit::       Implicit Transaction Commit and Rollback
* innodb-deadlock-detection::    Deadlock Detection and Rollback
* innodb-deadlocks::             How to Cope with Deadlocks

To implement a large-scale, busy, or highly reliable database
application, to port substantial code from a different database system,
or to push MySQL performance to the limits of the laws of physics, you
must understand the notions of transactions and locking as they relate
to the InnoDB storage engine.

In the `InnoDB' transaction model, the goal is to combine the best
properties of a multi-versioning database with traditional two-phase
locking. `InnoDB' does locking on the row level and runs queries as
nonlocking consistent reads by default, in the style of Oracle. The
lock information in `InnoDB' is stored so space-efficiently that lock
escalation is not needed: Typically, several users are permitted to
lock every row in `InnoDB' tables, or any random subset of the rows,
without causing `InnoDB' memory exhaustion.

In `InnoDB', all user activity occurs inside a transaction. If
autocommit mode is enabled, each SQL statement forms a single
transaction on its own. By default, MySQL starts the session for each
new connection with autocommit enabled, so MySQL does a commit after
each SQL statement if that statement did not return an error. If a
statement returns an error, the commit or rollback behavior depends on
the error. See *Note innodb-error-handling::.

A session that has autocommit enabled can perform a multiple-statement
transaction by starting it with an explicit *Note `START TRANSACTION':
commit. or *Note `BEGIN': commit. statement and ending it with a *Note
`COMMIT': commit. or *Note `ROLLBACK': commit.  statement. See *Note
commit::.

If autocommit mode is disabled within a session with `SET autocommit =
0', the session always has a transaction open. A *Note `COMMIT':
commit. or *Note `ROLLBACK': commit.  statement ends the current
transaction and a new one starts.

A *Note `COMMIT': commit. means that the changes made in the current
transaction are made permanent and become visible to other sessions. A
*Note `ROLLBACK': commit.  statement, on the other hand, cancels all
modifications made by the current transaction. Both *Note `COMMIT':
commit. and *Note `ROLLBACK': commit. release all `InnoDB' locks that
were set during the current transaction.

In terms of the SQL:1992 transaction isolation levels, the default
`InnoDB' level is `REPEATABLE READ'.  `InnoDB' offers all four
transaction isolation levels described by the SQL standard: `READ
UNCOMMITTED', `READ COMMITTED', `REPEATABLE READ', and `SERIALIZABLE'.

A user can change the isolation level for a single session or for all
subsequent connections with the *Note `SET TRANSACTION':
set-transaction. statement. To set the server's default isolation level
for all connections, use the `--transaction-isolation' option on the
command line or in an option file. For detailed information about
isolation levels and level-setting syntax, see *Note set-transaction::.

In row-level locking, `InnoDB' normally uses next-key locking. That
means that besides index records, `InnoDB' can also lock the `gap'
preceding an index record to block insertions by other sessions in the
gap immediately before the index record. A next-key lock refers to a
lock that locks an index record and the gap before it.  A gap lock
refers to a lock that locks only the gap before some index record.

For more information about row-level locking, and the circumstances
under which gap locking is disabled, see *Note
innodb-record-level-locks::.


File: manual.info,  Node: innodb-lock-modes,  Next: innodb-consistent-read,  Prev: innodb-transaction-model,  Up: innodb-transaction-model

14.3.9.1 `InnoDB' Lock Modes
............................

`InnoDB' implements standard row-level locking where there are two
types of locks, shared (S) locks and exclusive (X) locks. For
information about record, gap, and next-key lock types, see *Note
innodb-record-level-locks::.

   * A shared (S) lock permits a transaction to read a row.

   * An exclusive (X) lock permits a transaction to update or delete a
     row.

If transaction `T1' holds a shared (S) lock on row `r', then requests
from some distinct transaction `T2' for a lock on row `r' are handled
as follows:

   * A request by `T2' for an S lock can be granted immediately. As a
     result, both `T1' and `T2' hold an S lock on `r'.

   * A request by `T2' for an X lock cannot be granted immediately.

If a transaction `T1' holds an exclusive (X) lock on row `r', a request
from some distinct transaction `T2' for a lock of either type on `r'
cannot be granted immediately. Instead, transaction `T2' has to wait
for transaction `T1' to release its lock on row `r'.

* Intention Locks *

Additionally, `InnoDB' supports _multiple granularity locking_ which
permits coexistence of record locks and locks on entire tables. To make
locking at multiple granularity levels practical, additional types of
locks called _intention locks_ are used. Intention locks are table
locks in `InnoDB'. The idea behind intention locks is for a transaction
to indicate which type of lock (shared or exclusive) it will require
later for a row in that table. There are two types of intention locks
used in `InnoDB' (assume that transaction `T' has requested a lock of
the indicated type on table `t'):

   * Intention shared (IS): Transaction `T' intends to set S locks on
     individual rows in table `t'.

   * Intention exclusive (IX): Transaction `T' intends to set X locks
     on those rows.

For example, *Note `SELECT ... LOCK IN SHARE MODE': select. sets an IS
lock and *Note `SELECT ... FOR UPDATE': select. sets an IX lock.

The intention locking protocol is as follows:

   * Before a transaction can acquire an S lock on a row in table `t',
     it must first acquire an IS or stronger lock on `t'.

   * Before a transaction can acquire an X lock on a row, it must first
     acquire an IX lock on `t'.

These rules can be conveniently summarized by means of the following
_lock type compatibility matrix_.

Compatibility matrix showing which combinations of lock types X, IX, S,
and IS are allowed. Each cell in the matrix is marked as either
"Compatible" or "Conflict".

               X              IX             S              IS
X              Conflict       Conflict       Conflict       Conflict
IX             Conflict       Compatible     Conflict       Compatible
S              Conflict       Conflict       Compatible     Compatible
IS             Conflict       Compatible     Compatible     Compatible

A lock is granted to a requesting transaction if it is compatible with
existing locks, but not if it conflicts with existing locks. A
transaction waits until the conflicting existing lock is released. If a
lock request conflicts with an existing lock and cannot be granted
because it would cause deadlock, an error occurs.

Thus, intention locks do not block anything except full table requests
(for example, `LOCK TABLES ...  WRITE'). The main purpose of IX and IS
locks is to show that someone is locking a row, or going to lock a row
in the table.

* Deadlock Example *

The following example illustrates how an error can occur when a lock
request would cause a deadlock. The example involves two clients, A and
B.

First, client A creates a table containing one row, and then begins a
transaction. Within the transaction, A obtains an S lock on the row by
selecting it in share mode:


     mysql> CREATE TABLE t (i INT) ENGINE = InnoDB;
     Query OK, 0 rows affected (1.07 sec)

     mysql> INSERT INTO t (i) VALUES(1);
     Query OK, 1 row affected (0.09 sec)

     mysql> START TRANSACTION;
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT * FROM t WHERE i = 1 LOCK IN SHARE MODE;
     +------+
     | i    |
     +------+
     |    1 |
     +------+
     1 row in set (0.10 sec)

Next, client B begins a transaction and attempts to delete the row from
the table:

     mysql> START TRANSACTION;
     Query OK, 0 rows affected (0.00 sec)

     mysql> DELETE FROM t WHERE i = 1;

The delete operation requires an X lock. The lock cannot be granted
because it is incompatible with the S lock that client A holds, so the
request goes on the queue of lock requests for the row and client B
blocks.

Finally, client A also attempts to delete the row from the table:

     mysql> DELETE FROM t WHERE i = 1;
     ERROR 1213 (40001): Deadlock found when trying to get lock;
     try restarting transaction

Deadlock occurs here because client A needs an X lock to delete the
row. However, that lock request cannot be granted because client B
already has a request for an X lock and is waiting for client A to
release its S lock. Nor can the S lock held by A be upgraded to an X
lock because of the prior request by B for an X lock. As a result,
`InnoDB' generates an error for one of the clients and releases its
locks. The client returns this error:

     ERROR 1213 (40001): Deadlock found when trying to get lock;
     try restarting transaction

At that point, the lock request for the other client can be granted and
it deletes the row from the table.

*Note*:

If the `LATEST DETECTED DEADLOCK' section of InnoDB Monitor output
includes a message stating, ``TOO DEEP OR LONG SEARCH IN THE LOCK TABLE
WAITS-FOR GRAPH, WE WILL ROLL BACK FOLLOWING TRANSACTION',' this
indicates that the number of transactions on the wait-for list has
reached a limit of 200, which is defined by
`LOCK_MAX_DEPTH_IN_DEADLOCK_CHECK'. A wait-for list that exceeds 200
transactions is treated as a deadlock and the transaction attempting to
check the wait-for list is rolled back.

The same error may also occur if the locking thread must look at more
than 1,000,000 locks owned by the transactions on the wait-for list.
The limit of 1,000,000 locks is defined by
`LOCK_MAX_N_STEPS_IN_DEADLOCK_CHECK'.


File: manual.info,  Node: innodb-consistent-read,  Next: innodb-locking-reads,  Prev: innodb-lock-modes,  Up: innodb-transaction-model

14.3.9.2 Consistent Nonlocking Reads
....................................

A consistent read means that `InnoDB' uses multi-versioning to present
to a query a snapshot of the database at a point in time. The query
sees the changes made by transactions that committed before that point
of time, and no changes made by later or uncommitted transactions. The
exception to this rule is that the query sees the changes made by
earlier statements within the same transaction. This exception causes
the following anomaly: If you update some rows in a table, a *Note
`SELECT': select. sees the latest version of the updated rows, but it
might also see older versions of any rows. If other sessions
simultaneously update the same table, the anomaly means that you might
see the table in a state that never existed in the database.

If the transaction isolation level is `REPEATABLE READ' (the default
level), all consistent reads within the same transaction read the
snapshot established by the first such read in that transaction. You
can get a fresher snapshot for your queries by committing the current
transaction and after that issuing new queries.

With `READ COMMITTED' isolation level, each consistent read within a
transaction sets and reads its own fresh snapshot.

Consistent read is the default mode in which `InnoDB' processes *Note
`SELECT': select. statements in `READ COMMITTED' and `REPEATABLE READ'
isolation levels. A consistent read does not set any locks on the tables
it accesses, and therefore other sessions are free to modify those
tables at the same time a consistent read is being performed on the
table.

Suppose that you are running in the default `REPEATABLE READ' isolation
level. When you issue a consistent read (that is, an ordinary *Note
`SELECT': select. statement), `InnoDB' gives your transaction a
timepoint according to which your query sees the database. If another
transaction deletes a row and commits after your timepoint was
assigned, you do not see the row as having been deleted. Inserts and
updates are treated similarly.

*Note*:

The snapshot of the database state applies to *Note `SELECT': select.
statements within a transaction, not necessarily to DML statements. If
you insert or modify some rows and then commit that transaction, a
*Note `DELETE': delete. or *Note `UPDATE': update. statement issued from
another concurrent `REPEATABLE READ' transaction could affect those
just-committed rows, even though the session could not query them. If a
transaction does update or delete rows committed by a different
transaction, those changes do become visible to the current transaction.
For example, you might encounter a situation like the following:

     SELECT COUNT(c1) FROM t1 WHERE c1 = 'xyz'; -- Returns 0: no rows match.
     DELETE FROM t1 WHERE c1 = 'xyz'; -- Deletes several rows recently committed by other transaction.

     SELECT COUNT(c2) FROM t1 WHERE c2 = 'abc'; -- Returns 0: no rows match.
     UPDATE t1 SET c2 = 'cba' WHERE c2 = 'abc'; -- Affects 10 rows: another txn just committed 10 rows with 'abc' values.
     SELECT COUNT(c2) FROM t1 WHERE c2 = 'cba'; -- Returns 10: this txn can now see the rows it just updated.

You can advance your timepoint by committing your transaction and then
doing another *Note `SELECT': select. or *Note `START TRANSACTION WITH
CONSISTENT SNAPSHOT': commit.

This is called _multi-versioned concurrency control_.

In the following example, session A sees the row inserted by B only
when B has committed the insert and A has committed as well, so that
the timepoint is advanced past the commit of B.

                  Session A              Session B

                SET autocommit=0;      SET autocommit=0;
     time
     |          SELECT * FROM t;
     |          empty set
     |                                 INSERT INTO t VALUES (1, 2);
     |
     v          SELECT * FROM t;
                empty set
                                       COMMIT;

                SELECT * FROM t;
                empty set

                COMMIT;

                SELECT * FROM t;
                ---------------------
                |    1    |    2    |
                ---------------------
                1 row in set

If you want to see the `freshest' state of the database, use either the
`READ COMMITTED' isolation level or a locking read:

     SELECT * FROM t LOCK IN SHARE MODE;

With `READ COMMITTED' isolation level, each consistent read within a
transaction sets and reads its own fresh snapshot. With `LOCK IN SHARE
MODE', a locking read occurs instead: A `SELECT' blocks until the
transaction containing the freshest rows ends (see *Note
innodb-locking-reads::).

Consistent read does not work over certain DDL statements:

   * Consistent read does not work over *Note `DROP TABLE': drop-table,
     because MySQL cannot use a table that has been dropped and
     `InnoDB' destroys the table.

   * Consistent read does not work over *Note `ALTER TABLE':
     alter-table, because that statement makes a temporary copy of the
     original table and deletes the original table when the temporary
     copy is built.  When you reissue a consistent read within a
     transaction, rows in the new table are not visible because those
     rows did not exist when the transaction's snapshot was taken.

The type of read varies for selects in clauses like *Note `INSERT INTO
... SELECT': insert, *Note `UPDATE ... (SELECT)': update, and *Note
`CREATE TABLE ... SELECT': create-table. that do not specify `FOR
UPDATE' or `LOCK IN SHARE MODE':

   * By default, `InnoDB' uses stronger locks and the *Note `SELECT':
     select. part acts like `READ COMMITTED', where each consistent
     read, even within the same transaction, sets and reads its own
     fresh snapshot.

   * To use a consistent read in such cases, enable the
     `innodb_locks_unsafe_for_binlog' option and set the isolation
     level of the transaction to `READ UNCOMMITTED', `READ COMMITTED',
     or `REPEATABLE READ' (that is, anything other than
     `SERIALIZABLE'). In this case, no locks are set on rows read from
     the selected table.


File: manual.info,  Node: innodb-locking-reads,  Next: innodb-record-level-locks,  Prev: innodb-consistent-read,  Up: innodb-transaction-model

14.3.9.3 `SELECT ... FOR UPDATE' and `SELECT ... LOCK IN SHARE MODE' Locking Reads
..................................................................................

If you query data and then insert or update related data within the
same transaction, the regular `SELECT' statement does not give enough
protection. Other transactions can update or delete the same rows you
just queried.  `InnoDB' supports two types of locking reads that offer
extra safety:

   * *Note `SELECT ... LOCK IN SHARE MODE': select. sets a shared mode
     lock on any rows that are read. Other sessions can read the rows,
     but cannot modify them until your transaction commits. If any of
     these rows were changed by another transaction that has not yet
     committed, your query waits until that transaction ends and then
     uses the latest values.

   * *Note `SELECT ... FOR UPDATE': select. locks the rows and any
     associated index entries, the same as if you issued an `UPDATE'
     statement for those rows. Other transactions are blocked from
     updating those rows, from doing *Note `SELECT ... LOCK IN SHARE
     MODE': select, or from reading the data in certain transaction
     isolation levels. Consistent reads ignore any locks set on the
     records that exist in the read view. (Old versions of a record
     cannot be locked; they are reconstructed by applying undo logs on
     an in-memory copy of the record.)

These clauses are primarily useful when dealing with tree-structured or
graph-structured data, either in a single table or split across
multiple tables.

All locks set by `LOCK IN SHARE MODE' and `FOR UPDATE' queries are
released when the transaction is committed or rolled back.

*Note*:

Locking of rows for update using `SELECT FOR UPDATE' only applies when
autocommit is disabled (either by beginning transaction with *Note
`START TRANSACTION': commit. or by setting `autocommit' to 0. If
autocommit is enabled, the rows matching the specification are not
locked.

* Usage Examples *

Suppose that you want to insert a new row into a table `child', and
make sure that the child row has a parent row in table `parent'. Your
application code can ensure referential integrity throughout this
sequence of operations.

First, use a consistent read to query the table `PARENT' and verify
that the parent row exists.  Can you safely insert the child row to
table `CHILD'? No, because some other session could delete the parent
row in the moment between your `SELECT' and your `INSERT', without you
being aware of it.

To avoid this potential issue, perform the *Note `SELECT': select.
using `LOCK IN SHARE MODE':

     SELECT * FROM parent WHERE NAME = 'Jones' LOCK IN SHARE MODE;

After the `LOCK IN SHARE MODE' query returns the parent `'Jones'', you
can safely add the child record to the `CHILD' table and commit the
transaction. Any transaction that tries to read or write to the
applicable row in the `PARENT' table waits until you are finished, that
is, the data in all tables is in a consistent state.

For another example, consider an integer counter field in a table
`CHILD_CODES', used to assign a unique identifier to each child added
to table `CHILD'. Do not use either consistent read or a shared mode
read to read the present value of the counter, because two users of the
database could see the same value for the counter, and a duplicate-key
error occurs if two transactions attempt to add rows with the same
identifier to the `CHILD' table.

Here, `LOCK IN SHARE MODE' is not a good solution because if two users
read the counter at the same time, at least one of them ends up in
deadlock when it attempts to update the counter.

Here are two ways to implement reading and incrementing the counter
without interference from another transaction:

   * First update the counter by incrementing it by 1, then read it and
     use the new value in the `CHILD' table. Any other transaction that
     tries to read the counter waits until your transaction commits. If
     another transaction is in the middle of this same sequence, your
     transaction waits until the other one commits.

   * First perform a locking read of the counter using `FOR UPDATE',
     and then increment the counter:

          SELECT counter_field FROM child_codes FOR UPDATE;
          UPDATE child_codes SET counter_field = counter_field + 1;

A *Note `SELECT ... FOR UPDATE': select. reads the latest available
data, setting exclusive locks on each row it reads. Thus, it sets the
same locks a searched SQL *Note `UPDATE': update. would set on the rows.

The preceding description is merely an example of how *Note `SELECT ...
FOR UPDATE': select. works. In MySQL, the specific task of generating a
unique identifier actually can be accomplished using only a single
access to the table:

     UPDATE child_codes SET counter_field = LAST_INSERT_ID(counter_field + 1);
     SELECT LAST_INSERT_ID();

The *Note `SELECT': select. statement merely retrieves the identifier
information (specific to the current connection). It does not access
any table.


File: manual.info,  Node: innodb-record-level-locks,  Next: innodb-next-key-locking,  Prev: innodb-locking-reads,  Up: innodb-transaction-model

14.3.9.4 `InnoDB' Record, Gap, and Next-Key Locks
.................................................

`InnoDB' has several types of record-level locks including record
locks, gap locks, and next-key locks. For information about shared
locks, exclusive locks, and intention locks, see *Note
innodb-lock-modes::.

   * Record lock: This is a lock on an index record.

   * Gap lock: This is a lock on a gap between index records, or a lock
     on the gap before the first or after the last index record.

   * Next-key lock: This is a combination of a record lock on the index
     record and a gap lock on the gap before the index record.

* Record Locks *

Record locks always lock index records, even if a table is defined with
no indexes. For such cases, `InnoDB' creates a hidden clustered index
and uses this index for record locking. See *Note innodb-index-types::.

* Next-key Locks *

By default, `InnoDB' operates in `REPEATABLE READ' transaction
isolation level and with the `innodb_locks_unsafe_for_binlog' system
variable disabled. In this case, `InnoDB' uses next-key locks for
searches and index scans, which prevents phantom rows (see *Note
innodb-next-key-locking::).

Next-key locking combines index-row locking with gap locking.  `InnoDB'
performs row-level locking in such a way that when it searches or scans
a table index, it sets shared or exclusive locks on the index records
it encounters. Thus, the row-level locks are actually index-record
locks. In addition, a next-key lock on an index record also affects the
`gap' before that index record. That is, a next-key lock is an
index-record lock plus a gap lock on the gap preceding the index
record. If one session has a shared or exclusive lock on record `R' in
an index, another session cannot insert a new index record in the gap
immediately before `R' in the index order.

Suppose that an index contains the values 10, 11, 13, and 20.  The
possible next-key locks for this index cover the following intervals,
where `(' or `)' denote exclusion of the interval endpoint and `[' or
`]' denote inclusion of the endpoint:

     (negative infinity, 10]
     (10, 11]
     (11, 13]
     (13, 20]
     (20, positive infinity)

For the last interval, the next-key lock locks the gap above the
largest value in the index and the `supremum' pseudo-record having a
value higher than any value actually in the index. The supremum is not
a real index record, so, in effect, this next-key lock locks only the
gap following the largest index value.

* Gap Locks *

The next-key locking example in the previous section shows that a gap
might span a single index value, multiple index values, or even be
empty.

Gap locking is not needed for statements that lock rows using a unique
index to search for a unique row. (This does not include the case that
the search condition includes only some columns of a multiple-column
unique index; in that case, gap locking does occur.) For example, if
the `id' column has a unique index, the following statement uses only
an index-record lock for the row having `id' value 100 and it does not
matter whether other sessions insert rows in the preceding gap:

     SELECT * FROM child WHERE id = 100;

If `id' is not indexed or has a nonunique index, the statement does
lock the preceding gap.

A type of gap lock called an insertion intention gap lock is set by
*Note `INSERT': insert. operations prior to row insertion. This lock
signals the intent to insert in such a way that multiple transactions
inserting into the same index gap need not wait for each other if they
are not inserting at the same position within the gap. Suppose that
there are index records with values of 4 and 7. Separate transactions
that attempt to insert values of 5 and 6 each lock the gap between 4
and 7 with insert intention locks prior to obtaining the exclusive lock
on the inserted row, but do not block each other because the rows are
nonconflicting. For more information about intention locks, see *Note
innodb-lock-modes::.

It is also worth noting here that conflicting locks can be held on a
gap by different transactions. For example, transaction A can hold a
shared gap lock (gap S-lock) on a gap while transaction B holds an
exclusive gap lock (gap X-lock) on the same gap. The reason conflicting
gap locks are allowed is that if a record is purged from an index, the
gap locks held on the record by different transactions must be merged.

Gap locks in `InnoDB' are `purely inhibitive', which means they only
stop other transactions from inserting to the gap. Thus, a gap X-lock
has the same effect as a gap S-lock.

* Disabling Gap Locking *

Gap locking can be disabled explicitly. This occurs if you change the
transaction isolation level to `READ COMMITTED' or enable the
`innodb_locks_unsafe_for_binlog' system variable. Under these
circumstances, gap locking is disabled for searches and index scans and
is used only for foreign-key constraint checking and duplicate-key
checking.

There are also other effects of using the `READ COMMITTED' isolation
level or enabling `innodb_locks_unsafe_for_binlog': Record locks for
nonmatching rows are released after MySQL has evaluated the `WHERE'
condition. For `UPDATE' statements, `InnoDB' does a `semi-consistent'
read, such that it returns the latest committed version to MySQL so
that MySQL can determine whether the row matches the `WHERE' condition
of the *Note `UPDATE': update.


File: manual.info,  Node: innodb-next-key-locking,  Next: innodb-locks-set,  Prev: innodb-record-level-locks,  Up: innodb-transaction-model

14.3.9.5 Avoiding the Phantom Problem Using Next-Key Locking
............................................................

The so-called _phantom_ problem occurs within a transaction when the
same query produces different sets of rows at different times. For
example, if a *Note `SELECT': select. is executed twice, but returns a
row the second time that was not returned the first time, the row is a
`phantom' row.

Suppose that there is an index on the `id' column of the `child' table
and that you want to read and lock all rows from the table having an
identifier value larger than 100, with the intention of updating some
column in the selected rows later:

     SELECT * FROM child WHERE id > 100 FOR UPDATE;

The query scans the index starting from the first record where `id' is
bigger than 100. Let the table contain rows having `id' values of 90
and 102. If the locks set on the index records in the scanned range do
not lock out inserts made in the gaps (in this case, the gap between 90
and 102), another session can insert a new row into the table with an
`id' of 101. If you were to execute the same *Note `SELECT': select.
within the same transaction, you would see a new row with an `id' of
101 (a `phantom') in the result set returned by the query. If we regard
a set of rows as a data item, the new phantom child would violate the
isolation principle of transactions that a transaction should be able to
run so that the data it has read does not change during the transaction.

To prevent phantoms, `InnoDB' uses an algorithm called _next-key
locking_ that combines index-row locking with gap locking. `InnoDB'
performs row-level locking in such a way that when it searches or scans
a table index, it sets shared or exclusive locks on the index records
it encounters. Thus, the row-level locks are actually index-record
locks. In addition, a next-key lock on an index record also affects the
`gap' before that index record. That is, a next-key lock is an
index-record lock plus a gap lock on the gap preceding the index
record. If one session has a shared or exclusive lock on record `R' in
an index, another session cannot insert a new index record in the gap
immediately before `R' in the index order.

When `InnoDB' scans an index, it can also lock the gap after the last
record in the index. Just that happens in the preceding example: To
prevent any insert into the table where `id' would be bigger than 100,
the locks set by `InnoDB' include a lock on the gap following `id'
value 102.

You can use next-key locking to implement a uniqueness check in your
application: If you read your data in share mode and do not see a
duplicate for a row you are going to insert, then you can safely insert
your row and know that the next-key lock set on the successor of your
row during the read prevents anyone meanwhile inserting a duplicate for
your row. Thus, the next-key locking enables you to `lock' the
nonexistence of something in your table.

Gap locking can be disabled as discussed in *Note
innodb-record-level-locks::. This may cause phantom problems because
other sessions can insert new rows into the gaps when gap locking is
disabled.


File: manual.info,  Node: innodb-locks-set,  Next: innodb-implicit-commit,  Prev: innodb-next-key-locking,  Up: innodb-transaction-model

14.3.9.6 Locks Set by Different SQL Statements in `InnoDB'
..........................................................

A locking read, an *Note `UPDATE': update, or a *Note `DELETE': delete.
generally set record locks on every index record that is scanned in the
processing of the SQL statement. It does not matter whether there are
`WHERE' conditions in the statement that would exclude the row.
`InnoDB' does not remember the exact `WHERE' condition, but only knows
which index ranges were scanned. The locks are normally next-key locks
that also block inserts into the `gap' immediately before the record.
However, gap locking can be disabled explicitly, which causes next-key
locking not to be used. For more information, see *Note
innodb-record-level-locks::. The transaction isolation level also can
affect which locks are set; see *Note set-transaction::.

If a secondary index is used in a search and index record locks to be
set are exclusive, `InnoDB' also retrieves the corresponding clustered
index records and sets locks on them.

Differences between shared and exclusive locks are described in *Note
innodb-lock-modes::.

If you have no indexes suitable for your statement and MySQL must scan
the entire table to process the statement, every row of the table
becomes locked, which in turn blocks all inserts by other users to the
table. It is important to create good indexes so that your queries do
not unnecessarily scan many rows.

For *Note `SELECT ... FOR UPDATE': select. or *Note `SELECT ... LOCK IN
SHARE MODE': select, locks are acquired for scanned rows, and expected
to be released for rows that do not qualify for inclusion in the result
set (for example, if they do not meet the criteria given in the `WHERE'
clause).  However, in some cases, rows might not be unlocked immediately
because the relationship between a result row and its original source
is lost during query execution. For example, in a *Note `UNION': union,
scanned (and locked) rows from a table might be inserted into a
temporary table before evaluation whether they qualify for the result
set. In this circumstance, the relationship of the rows in the temporary
table to the rows in the original table is lost and the latter rows are
not unlocked until the end of query execution.

`InnoDB' sets specific types of locks as follows.

   * *Note `SELECT ... FROM': select. is a consistent read, reading a
     snapshot of the database and setting no locks unless the
     transaction isolation level is set to `SERIALIZABLE'. For
     `SERIALIZABLE' level, the search sets shared next-key locks on the
     index records it encounters.

   * *Note `SELECT ... FROM ... LOCK IN SHARE MODE': select. sets
     shared next-key locks on all index records the search encounters.

   * For index records the search encounters, *Note `SELECT ... FROM
     ... FOR UPDATE': select. blocks other sessions from doing *Note
     `SELECT ... FROM ... LOCK IN SHARE MODE': select. or from reading
     in certain transaction isolation levels. Consistent reads will
     ignore any locks set on the records that exist in the read view.

   * *Note `UPDATE ... WHERE ...': update. sets an exclusive next-key
     lock on every record the search encounters.

   * *Note `DELETE FROM ... WHERE ...': delete. sets an exclusive
     next-key lock on every record the search encounters.

   * *Note `INSERT': insert. sets an exclusive lock on the inserted
     row. This lock is an index-record lock, not a next-key lock (that
     is, there is no gap lock) and does not prevent other sessions from
     inserting into the gap before the inserted row.

     Prior to inserting the row, a type of gap lock called an insertion
     intention gap lock is set. This lock signals the intent to insert
     in such a way that multiple transactions inserting into the same
     index gap need not wait for each other if they are not inserting
     at the same position within the gap. Suppose that there are index
     records with values of 4 and 7. Separate transactions that attempt
     to insert values of 5 and 6 each lock the gap between 4 and 7 with
     insert intention locks prior to obtaining the exclusive lock on the
     inserted row, but do not block each other because the rows are
     nonconflicting.

     If a duplicate-key error occurs, a shared lock on the duplicate
     index record is set. This use of a shared lock can result in
     deadlock should there be multiple sessions trying to insert the
     same row if another session already has an exclusive lock. This
     can occur if another session deletes the row. Suppose that an
     `InnoDB' table `t1' has the following structure:

          CREATE TABLE t1 (i INT, PRIMARY KEY (i)) ENGINE = InnoDB;

     Now suppose that three sessions perform the following operations
     in order:

     Session 1:

          START TRANSACTION;
          INSERT INTO t1 VALUES(1);

     Session 2:

          START TRANSACTION;
          INSERT INTO t1 VALUES(1);

     Session 3:

          START TRANSACTION;
          INSERT INTO t1 VALUES(1);

     Session 1:

          ROLLBACK;

     The first operation by session 1 acquires an exclusive lock for
     the row. The operations by sessions 2 and 3 both result in a
     duplicate-key error and they both request a shared lock for the
     row. When session 1 rolls back, it releases its exclusive lock on
     the row and the queued shared lock requests for sessions 2 and 3
     are granted. At this point, sessions 2 and 3 deadlock: Neither can
     acquire an exclusive lock for the row because of the shared lock
     held by the other.

     A similar situation occurs if the table already contains a row
     with key value 1 and three sessions perform the following
     operations in order:

     Session 1:

          START TRANSACTION;
          DELETE FROM t1 WHERE i = 1;

     Session 2:

          START TRANSACTION;
          INSERT INTO t1 VALUES(1);

     Session 3:

          START TRANSACTION;
          INSERT INTO t1 VALUES(1);

     Session 1:

          COMMIT;

     The first operation by session 1 acquires an exclusive lock for
     the row. The operations by sessions 2 and 3 both result in a
     duplicate-key error and they both request a shared lock for the
     row. When session 1 commits, it releases its exclusive lock on the
     row and the queued shared lock requests for sessions 2 and 3 are
     granted. At this point, sessions 2 and 3 deadlock: Neither can
     acquire an exclusive lock for the row because of the shared lock
     held by the other.

   * *Note `INSERT ... ON DUPLICATE KEY UPDATE': insert-on-duplicate.
     differs from a simple *Note `INSERT': insert. in that an exclusive
     next-key lock rather than a shared lock is placed on the row to be
     updated when a duplicate-key error occurs.

   * *Note `REPLACE': replace. is done like an *Note `INSERT': insert.
     if there is no collision on a unique key. Otherwise, an exclusive
     next-key lock is placed on the row to be replaced.

   * `INSERT INTO T SELECT ... FROM S WHERE ...' sets an exclusive
     index record without a gap lock on each row inserted into `T'. If
     the transaction isolation level is `READ COMMITTED' or
     `innodb_locks_unsafe_for_binlog' is enabled, and the transaction
     isolation level is not `SERIALIZABLE', `InnoDB' does the search on
     `S' as a consistent read (no locks).  Otherwise, `InnoDB' sets
     shared next-key locks on rows from `S'.  `InnoDB' has to set locks
     in the latter case: In roll-forward recovery from a backup, every
     SQL statement must be executed in exactly the same way it was done
     originally.

     *Note `CREATE TABLE ... SELECT ...': create-table. performs the
     *Note `SELECT': select. with shared next-key locks or as a
     consistent read, as for *Note `INSERT ... SELECT': insert-select.

     When a `SELECT' is used in the constructs `REPLACE INTO t SELECT
     ... FROM s WHERE ...' or `UPDATE t ... WHERE col IN (SELECT ...
     FROM s ...)', `InnoDB' sets shared next-key locks on rows from
     table `s'.

   * While initializing a previously specified `AUTO_INCREMENT' column
     on a table, `InnoDB' sets an exclusive lock on the end of the
     index associated with the `AUTO_INCREMENT' column. In accessing the
     auto-increment counter, `InnoDB' uses a specific `AUTO-INC' table
     lock mode where the lock lasts only to the end of the current SQL
     statement, not to the end of the entire transaction. Other sessions
     cannot insert into the table while the `AUTO-INC' table lock is
     held; see *Note innodb-transaction-model::.

     `InnoDB' fetches the value of a previously initialized
     `AUTO_INCREMENT' column without setting any locks.

   * If a `FOREIGN KEY' constraint is defined on a table, any insert,
     update, or delete that requires the constraint condition to be
     checked sets shared record-level locks on the records that it
     looks at to check the constraint. `InnoDB' also sets these locks
     in the case where the constraint fails.

   * *Note `LOCK TABLES': lock-tables. sets table locks, but it is the
     higher MySQL layer above the `InnoDB' layer that sets these locks.
     `InnoDB' is aware of table locks if `innodb_table_locks = 1' (the
     default) and `autocommit = 0', and the MySQL layer above `InnoDB'
     knows about row-level locks.

     Otherwise, `InnoDB''s automatic deadlock detection cannot detect
     deadlocks where such table locks are involved. Also, because in
     this case the higher MySQL layer does not know about row-level
     locks, it is possible to get a table lock on a table where another
     session currently has row-level locks. However, this does not
     endanger transaction integrity, as discussed in *Note
     innodb-deadlock-detection::. See also *Note innodb-restrictions::.


File: manual.info,  Node: innodb-implicit-commit,  Next: innodb-deadlock-detection,  Prev: innodb-locks-set,  Up: innodb-transaction-model

14.3.9.7 Implicit Transaction Commit and Rollback
.................................................

By default, MySQL starts the session for each new connection with
autocommit mode enabled, so MySQL does a commit after each SQL
statement if that statement did not return an error. If a statement
returns an error, the commit or rollback behavior depends on the error.
See *Note innodb-error-handling::.

If a session that has autocommit disabled ends without explicitly
committing the final transaction, MySQL rolls back that transaction.

Some statements implicitly end a transaction, as if you had done a
*Note `COMMIT': commit. before executing the statement. For details,
see *Note implicit-commit::.


File: manual.info,  Node: innodb-deadlock-detection,  Next: innodb-deadlocks,  Prev: innodb-implicit-commit,  Up: innodb-transaction-model

14.3.9.8 Deadlock Detection and Rollback
........................................

`InnoDB' automatically detects transaction deadlocks and rolls back a
transaction or transactions to break the deadlock.  `InnoDB' tries to
pick small transactions to roll back, where the size of a transaction
is determined by the number of rows inserted, updated, or deleted.

`InnoDB' is aware of table locks if `innodb_table_locks = 1' (the
default) and `autocommit = 0', and the MySQL layer above it knows about
row-level locks. Otherwise, `InnoDB' cannot detect deadlocks where a
table lock set by a MySQL *Note `LOCK TABLES': lock-tables.  statement
or a lock set by a storage engine other than `InnoDB' is involved.
Resolve these situations by setting the value of the
`innodb_lock_wait_timeout' system variable.

When `InnoDB' performs a complete rollback of a transaction, all locks
set by the transaction are released.  However, if just a single SQL
statement is rolled back as a result of an error, some of the locks set
by the statement may be preserved. This happens because `InnoDB' stores
row locks in a format such that it cannot know afterward which lock was
set by which statement.

If a *Note `SELECT': select. calls a stored function in a transaction,
and a statement within the function fails, that statement rolls back.
Furthermore, if *Note `ROLLBACK': commit. is executed after that, the
entire transaction rolls back.

For techniques to organize database operations to avoid deadlocks, see
*Note innodb-deadlocks::.


File: manual.info,  Node: innodb-deadlocks,  Prev: innodb-deadlock-detection,  Up: innodb-transaction-model

14.3.9.9 How to Cope with Deadlocks
...................................

This section builds on the conceptual information about deadlocks in
*Note innodb-deadlock-detection::. It explains how to organize database
operations to minimize deadlocks and the subsequent error handling
required in applications.

Deadlocks are a classic problem in transactional databases, but they
are not dangerous unless they are so frequent that you cannot run
certain transactions at all. Normally, you must write your applications
so that they are always prepared to re-issue a transaction if it gets
rolled back because of a deadlock.

`InnoDB' uses automatic row-level locking. You can get deadlocks even
in the case of transactions that just insert or delete a single row.
That is because these operations are not really `atomic'; they
automatically set locks on the (possibly several) index records of the
row inserted or deleted.

You can cope with deadlocks and reduce the likelihood of their
occurrence with the following techniques:

   * Use *Note `SHOW ENGINE INNODB STATUS': show-engine. to determine
     the cause of the latest deadlock. That can help you to tune your
     application to avoid deadlocks.

   * If frequent deadlock warnings cause concern, collect more
     extensive debugging information by restarting the server with the
     `innodb_print_all_deadlocks' configuration option enabled.
     Information about each deadlock, not just the latest one, is
     recorded in the MySQL error log. Remove this option and restart
     the server again once the debugging is finished.

   * Always be prepared to re-issue a transaction if it fails due to
     deadlock. Deadlocks are not dangerous. Just try again.

   * Commit your transactions immediately after making a set of related
     changes. Small transactions are less prone to collision. In
     particular, do not leave an interactive *Note `mysql': mysql.
     session open for a long time with an uncommitted transaction.

   * If you are using locking reads (*Note `SELECT ... FOR UPDATE':
     select. or `SELECT ...  LOCK IN SHARE MODE'), try using a lower
     isolation level such as `READ COMMITTED'.

   * When modifying multiple tables within a transaction, or different
     sets of rows in the same table, do those operations in a
     consistent order each time. Then transactions form well-defined
     queues and do not deadlock.  For example, organize database
     operations into functions within your application, or call stored
     routines, rather than coding multiple similar sequences of
     `INSERT', `UPDATE', and `DELETE' statements in different places.

   * Add well-chosen indexes to your tables. Then your queries need to
     scan fewer index records and consequently set fewer locks. Use
     *Note `EXPLAIN SELECT': explain. to determine which indexes the
     MySQL server regards as the most appropriate for your queries.

   * Use less locking. If you can afford to permit a *Note `SELECT':
     select. to return data from an old snapshot, do not add the clause
     `FOR UPDATE' or `LOCK IN SHARE MODE' to it. Using the `READ
     COMMITTED' isolation level is good here, because each consistent
     read within the same transaction reads from its own fresh snapshot.

   * If nothing else helps, serialize your transactions with
     table-level locks. The correct way to use *Note `LOCK TABLES':
     lock-tables. with transactional tables, such as `InnoDB' tables,
     is to begin a transaction with `SET autocommit = 0' (not *Note
     `START TRANSACTION': commit.) followed by *Note `LOCK TABLES':
     lock-tables, and to not call *Note `UNLOCK TABLES': lock-tables.
     until you commit the transaction explicitly. For example, if you
     need to write to table `t1' and read from table `t2', you can do
     this:

          SET autocommit=0;
          LOCK TABLES t1 WRITE, t2 READ, ...;... DO SOMETHING WITH TABLES T1 AND T2 HERE ...
          COMMIT;
          UNLOCK TABLES;

     Table-level locks prevent concurrent updates to the table,
     avoiding deadlocks at the expense of less responsiveness for a
     busy system.

   * Another way to serialize transactions is to create an auxiliary
     `semaphore' table that contains just a single row. Have each
     transaction update that row before accessing other tables. In that
     way, all transactions happen in a serial fashion. Note that the
     `InnoDB' instant deadlock detection algorithm also works in this
     case, because the serializing lock is a row-level lock. With MySQL
     table-level locks, the timeout method must be used to resolve
     deadlocks.


File: manual.info,  Node: innodb-multi-versioning,  Next: innodb-table-and-index,  Prev: innodb-transaction-model,  Up: innodb-storage-engine

14.3.10 `InnoDB' Multi-Versioning
---------------------------------

`InnoDB' is a multi-versioned storage engine: it keeps information
about old versions of changed rows, to support transactional features
such as concurrency and rollback. This information is stored in the
tablespace in a data structure called a rollback segment (after an
analogous data structure in Oracle).  `InnoDB' uses the information in
the rollback segment to perform the undo operations needed in a
transaction rollback. It also uses the information to build earlier
versions of a row for a consistent read.

* Internal Details of Multi-Versioning *

Internally, `InnoDB' adds three fields to each row stored in the
database. A 6-byte `DB_TRX_ID' field indicates the transaction
identifier for the last transaction that inserted or updated the row.
Also, a deletion is treated internally as an update where a special bit
in the row is set to mark it as deleted. Each row also contains a 7-byte
`DB_ROLL_PTR' field called the roll pointer. The roll pointer points to
an undo log record written to the rollback segment. If the row was
updated, the undo log record contains the information necessary to
rebuild the content of the row before it was updated. A 6-byte
`DB_ROW_ID' field contains a row ID that increases monotonically as new
rows are inserted. If `InnoDB' generates a clustered index
automatically, the index contains row ID values. Otherwise, the
`DB_ROW_ID' column does not appear in any index.

Undo logs in the rollback segment are divided into insert and update
undo logs. Insert undo logs are needed only in transaction rollback and
can be discarded as soon as the transaction commits.  Update undo logs
are used also in consistent reads, but they can be discarded only after
there is no transaction present for which `InnoDB' has assigned a
snapshot that in a consistent read could need the information in the
update undo log to build an earlier version of a database row.

* Guidelines for Managing Rollback Segments *

Commit your transactions regularly, including those transactions that
issue only consistent reads. Otherwise, `InnoDB' cannot discard data
from the update undo logs, and the rollback segment may grow too big,
filling up your tablespace.

The physical size of an undo log record in the rollback segment is
typically smaller than the corresponding inserted or updated row.  You
can use this information to calculate the space needed for your
rollback segment.

In the `InnoDB' multi-versioning scheme, a row is not physically
removed from the database immediately when you delete it with an SQL
statement. `InnoDB' only physically removes the corresponding row and
its index records when it discards the update undo log record written
for the deletion. This removal operation is called a purge, and it is
quite fast, usually taking the same order of time as the SQL statement
that did the deletion.

If you insert and delete rows in smallish batches at about the same
rate in the table, the purge thread can start to lag behind and the
table can grow bigger and bigger because of all the `dead' rows, making
everything disk-bound and very slow. In such a case, throttle new row
operations, and allocate more resources to the purge thread by tuning
the `innodb_max_purge_lag' system variable. See *Note
innodb-parameters:: for more information.


File: manual.info,  Node: innodb-table-and-index,  Next: innodb-disk-management,  Prev: innodb-multi-versioning,  Up: innodb-storage-engine

14.3.11 `InnoDB' Table and Index Structures
-------------------------------------------

* Menu:

* innodb-index-types::           Clustered and Secondary Indexes
* innodb-physical-structure::    Physical Structure of an InnoDB Index
* innodb-insert-buffering::      Insert Buffering
* innodb-adaptive-hash::         Adaptive Hash Indexes
* innodb-physical-record::       Physical Row Structure

* Role of the .frm File *

MySQL stores its data dictionary information for tables in `.frm' files
in database directories. This is true for all MySQL storage engines,
but every `InnoDB' table also has its own entry in the `InnoDB'
internal data dictionary inside the tablespace. When MySQL drops a
table or a database, it has to delete one or more `.frm' files as well
as the corresponding entries inside the `InnoDB' data dictionary.
Consequently, you cannot move `InnoDB' tables between databases simply
by moving the `.frm' files.


File: manual.info,  Node: innodb-index-types,  Next: innodb-physical-structure,  Prev: innodb-table-and-index,  Up: innodb-table-and-index

14.3.11.1 Clustered and Secondary Indexes
.........................................

Every `InnoDB' table has a special index called the clustered index
where the data for the rows is stored. Typically, the clustered index
is synonymous with the primary key. To get the best performance from
queries, inserts, and other database operations, you must understand
how InnoDB uses the clustered index to optimize the most common lookup
and DML operations for each table.

   * If you define a `PRIMARY KEY' on your table, `InnoDB' uses it as
     the clustered index. Define a primary key for each table that you
     create.  If there is no logical unique and non-null column or set
     of columns, add a new auto-increment column, whose values are
     filled in automatically.

   * If you do not define a `PRIMARY KEY' for your table, MySQL locates
     the first `UNIQUE' index where all the key columns are `NOT NULL'
     and `InnoDB' uses it as the clustered index.

   * If the table has no `PRIMARY KEY' or suitable `UNIQUE' index,
     `InnoDB' internally generates a hidden clustered index on a
     synthetic column containing row ID values. The rows are ordered by
     the ID that `InnoDB' assigns to the rows in such a table. The row
     ID is a 6-byte field that increases monotonically as new rows are
     inserted. Thus, the rows ordered by the row ID are physically in
     insertion order.

* How the Clustered Index Speeds Up Queries *

Accessing a row through the clustered index is fast because the row
data is on the same page where the index search leads. If a table is
large, the clustered index architecture often saves a disk I/O
operation when compared to storage organizations that store row data
using a different page from the index record.  (For example, `MyISAM'
uses one file for data rows and another for index records.)

* How Secondary Indexes Relate to the Clustered Index *

All indexes other than the clustered index are known as secondary
indexes.  In `InnoDB', each record in a secondary index contains the
primary key columns for the row, as well as the columns specified for
the secondary index.  `InnoDB' uses this primary key value to search
for the row in the clustered index.

If the primary key is long, the secondary indexes use more space, so it
is advantageous to have a short primary key.


File: manual.info,  Node: innodb-physical-structure,  Next: innodb-insert-buffering,  Prev: innodb-index-types,  Up: innodb-table-and-index

14.3.11.2 Physical Structure of an InnoDB Index
...............................................

All `InnoDB' indexes are B-trees where the index records are stored in
the leaf pages of the tree. The default size of an index page is 16KB.
When new records are inserted, `InnoDB' tries to leave 1/16 of the page
free for future insertions and updates of the index records.

If index records are inserted in a sequential order (ascending or
descending), the resulting index pages are about 15/16 full.  If
records are inserted in a random order, the pages are from 1/2 to 15/16
full. If the fill factor of an index page drops below 1/2, `InnoDB'
tries to contract the index tree to free the page.

*Note*:

Changing the page size is not a supported operation and there is no
guarantee that `InnoDB' will function normally with a page size other
than 16KB. Problems compiling or running InnoDB may occur. In
particular, `ROW_FORMAT=COMPRESSED' in the Barracuda file format
assumes that the page size is at most 16KB and uses 14-bit pointers.

A version of `InnoDB' built for one page size cannot use data files or
log files from a version built for a different page size.


File: manual.info,  Node: innodb-insert-buffering,  Next: innodb-adaptive-hash,  Prev: innodb-physical-structure,  Up: innodb-table-and-index

14.3.11.3 Insert Buffering
..........................

Database applications often insert new rows in the ascending order of
the primary key. In this case, due to the layout of the clustered index
in the same order as the primary key, insertions into an InnoDB table
do not require random reads from a disk.

On the other hand, secondary indexes are usually nonunique, and
insertions into secondary indexes happen in a relatively random order.
In the same way, deletes and updates can affect data pages that are not
adjacent in secondary indexes. This would cause a lot of random disk
I/O operations without a special mechanism used in `InnoDB'.

When an index record is inserted, marked for deletion, or deleted from
a nonunique secondary index, `InnoDB' checks whether the secondary index
page is in the buffer pool. If that is the case, `InnoDB' applies the
change directly to the index page. If the index page is not found in
the buffer pool, `InnoDB' records the change in a special structure
known as the insert buffer. The insert buffer is kept small so that it
fits entirely in the buffer pool, and changes can be applied very
quickly. This process is known as change buffering.  (Formerly, it
applied only to inserts and was called insert buffering. The data
structure is still called the insert buffer.)

* Disk I/O for Flushing the Insert Buffer *

Periodically, the insert buffer is merged into the secondary index
trees in the database. Often, it is possible to merge several changes
into the same page of the index tree, saving disk I/O operations. It
has been measured that the insert buffer can speed up insertions into a
table up to 15 times.

The insert buffer merging may continue to happen _after_ the
transaction has been committed.  In fact, it may continue to happen
after a server shutdown and restart (see *Note
forcing-innodb-recovery::).

Insert buffer merging may take many hours when many secondary indexes
must be updated and many rows have been inserted. During this time,
disk I/O will be increased, which can cause significant slowdown on
disk-bound queries. Another significant background I/O operation is the
purge thread (see *Note innodb-multi-versioning::).


File: manual.info,  Node: innodb-adaptive-hash,  Next: innodb-physical-record,  Prev: innodb-insert-buffering,  Up: innodb-table-and-index

14.3.11.4 Adaptive Hash Indexes
...............................

The feature known as the adaptive hash index (AHI) lets `InnoDB'
perform more like an in-memory database on systems with appropriate
combinations of workload and ample memory for the buffer pool, without
sacrificing any transactional features or reliability.

Based on the observed pattern of searches, MySQL builds a hash index
using a prefix of the index key. The prefix of the key can be any
length, and it may be that only some of the values in the B-tree appear
in the hash index. Hash indexes are built on demand for those pages of
the index that are often accessed.

If a table fits almost entirely in main memory, a hash index can speed
up queries by enabling direct lookup of any element, turning the index
value into a sort of pointer.  `InnoDB' has a mechanism that monitors
index searches. If `InnoDB' notices that queries could benefit from
building a hash index, it does so automatically. This feature is
enabled by the `innodb_adaptive_hash_index' option, or turned off by the
`--skip-innodb_adaptive_hash_index' at server startup.

With some workloads, the speedup from hash index lookups greatly
outweighs the extra work to monitor index lookups and maintain the hash
index structure.  Sometimes, the read/write lock that guards access to
the adaptive hash index can become a source of contention under heavy
workloads, such as multiple concurrent joins. Queries with `LIKE'
operators and `%' wildcards also tend not to benefit from the AHI. For
workloads where the adaptive hash index is not needed, turning it off
reduces unnecessary performance overhead. Because it is difficult to
predict in advance whether this feature is appropriate for a particular
system, consider running benchmarks with it both enabled and disabled,
using a realistic workload.

The hash index is always built based on an existing B-tree index on the
table. `InnoDB' can build a hash index on a prefix of any length of the
key defined for the B-tree, depending on the pattern of searches that
`InnoDB' observes for the B-tree index. A hash index can be partial,
covering only those pages of the index that are often accessed.

You can monitor the use of the adaptive hash index and the contention
for its use in the *Note `SEMAPHORES': show-engine.  section of the
output of the `SHOW ENGINE INNODB STATUS' command. If you see many
threads waiting on an RW-latch created in `btr0sea.c', then it might be
useful to disable adaptive hash indexing.

For more information about the performance characteristics of hash
indexes, see *Note index-btree-hash::.


File: manual.info,  Node: innodb-physical-record,  Prev: innodb-adaptive-hash,  Up: innodb-table-and-index

14.3.11.5 Physical Row Structure
................................

The physical row structure for an `InnoDB' table depends on the row
format specified when the table was created. `InnoDB' uses the
`COMPACT' format by default, but the `REDUNDANT' format is available to
retain compatibility with older versions of MySQL. To check the row
format of an `InnoDB' table, use *Note `SHOW TABLE STATUS':
show-table-status.

The compact row format decreases row storage space by about 20% at the
cost of increasing CPU use for some operations. If your workload is a
typical one that is limited by cache hit rates and disk speed, compact
format is likely to be faster. If the workload is a rare case that is
limited by CPU speed, compact format might be slower.

Rows in `InnoDB' tables that use `REDUNDANT' row format have the
following characteristics:

   * Each index record contains a 6-byte header. The header is used to
     link together consecutive records, and also in row-level locking.

   * Records in the clustered index contain fields for all user-defined
     columns. In addition, there is a 6-byte transaction ID field and a
     7-byte roll pointer field.

   * If no primary key was defined for a table, each clustered index
     record also contains a 6-byte row ID field.

   * Each secondary index record also contains all the primary key
     fields defined for the clustered index key that are not in the
     secondary index.

   * A record contains a pointer to each field of the record. If the
     total length of the fields in a record is less than 128 bytes, the
     pointer is one byte; otherwise, two bytes. The array of these
     pointers is called the record directory. The area where these
     pointers point is called the data part of the record.

   * Internally, `InnoDB' stores fixed-length character columns such as
     *Note `CHAR(10)': char. in a fixed-length format. `InnoDB' does
     not truncate trailing spaces from *Note `VARCHAR': char. columns.

   * An SQL `NULL' value reserves one or two bytes in the record
     directory. Besides that, an SQL `NULL' value reserves zero bytes
     in the data part of the record if stored in a variable length
     column. In a fixed-length column, it reserves the fixed length of
     the column in the data part of the record.  Reserving the fixed
     space for `NULL' values enables an update of the column from `NULL'
     to a non-`NULL' value to be done in place without causing
     fragmentation of the index page.

Rows in `InnoDB' tables that use `COMPACT' row format have the following
characteristics:

   * Each index record contains a 5-byte header that may be preceded by
     a variable-length header. The header is used to link together
     consecutive records, and also in row-level locking.

   * The variable-length part of the record header contains a bit
     vector for indicating `NULL' columns. If the number of columns in
     the index that can be `NULL' is N, the bit vector occupies
     `CEILING(N/8)' bytes. (For example, if there are anywhere from 9
     to 15 columns that can be `NULL', the bit vector uses two bytes.)
     Columns that are `NULL' do not occupy space other than the bit in
     this vector. The variable-length part of the header also contains
     the lengths of variable-length columns. Each length takes one or
     two bytes, depending on the maximum length of the column. If all
     columns in the index are `NOT NULL' and have a fixed length, the
     record header has no variable-length part.

   * For each non-`NULL' variable-length field, the record header
     contains the length of the column in one or two bytes. Two bytes
     will only be needed if part of the column is stored externally in
     overflow pages or the maximum length exceeds 255 bytes and the
     actual length exceeds 127 bytes. For an externally stored column,
     the 2-byte length indicates the length of the internally stored
     part plus the 20-byte pointer to the externally stored part. The
     internal part is 768 bytes, so the length is 768+20. The 20-byte
     pointer stores the true length of the column.

   * The record header is followed by the data contents of the
     non-`NULL' columns.

   * Records in the clustered index contain fields for all user-defined
     columns. In addition, there is a 6-byte transaction ID field and a
     7-byte roll pointer field.

   * If no primary key was defined for a table, each clustered index
     record also contains a 6-byte row ID field.

   * Each secondary index record also contains all the primary key
     fields defined for the clustered index key that are not in the
     secondary index. If any of these primary key fields are variable
     length, the record header for each secondary index will have a
     variable-length part to record their lengths, even if the
     secondary index is defined on fixed-length columns.

   * Internally, `InnoDB' stores fixed-length, fixed-width character
     columns such as *Note `CHAR(10)': char. in a fixed-length format.
     `InnoDB' does not truncate trailing spaces from *Note `VARCHAR':
     char. columns.

   * Internally, `InnoDB' attempts to store UTF-8 *Note `CHAR(N)': char.
     columns in N bytes by trimming trailing spaces. (With `REDUNDANT'
     row format, such columns occupy 3 x N bytes.) Reserving the minimum
     space N in many cases enables column updates to be done in place
     without causing fragmentation of the index page.


File: manual.info,  Node: innodb-disk-management,  Next: innodb-error-handling,  Prev: innodb-table-and-index,  Up: innodb-storage-engine

14.3.12 Managing Disk I/O and File Space for `InnoDB' Tables
------------------------------------------------------------

* Menu:

* innodb-disk-io::               `InnoDB' Disk I/O
* innodb-file-space::            File Space Management
* innodb-file-defragmenting::    Defragmenting a Table

As a DBA, you must manage disk I/O to keep the I/O subsystem from
becoming saturated, and manage disk space to avoid filling up storage
devices. The ACID design model requires a certain amount of I/O that
might seem redundant, but helps to ensure data reliability. Within
these constraints, `InnoDB' tries to optimize the database work and the
organization of disk files to minimize the amount of disk I/O.
Sometimes, I/O is postponed until the database is not busy, or until
everything needs to be brought to a consistent state, such as during a
database restart after a fast shutdown.


File: manual.info,  Node: innodb-disk-io,  Next: innodb-file-space,  Prev: innodb-disk-management,  Up: innodb-disk-management

14.3.12.1 `InnoDB' Disk I/O
...........................

`InnoDB' uses asynchronous disk I/O where possible, by creating a
number of threads to handle I/O operations, while permitting other
database operations to proceed while the I/O is still in progress. On
Linux and Windows platforms, InnoDB uses the available OS and library
functions to perform `native' asynchronous I/O. On other platforms,
InnoDB still uses I/O threads, but the threads may actually wait for
I/O requests to complete; this technique is known as `simulated'
asynchronous I/O.

* Read-Ahead *

If InnoDB can determine there is a high probability that data might be
needed soon, it performs read-ahead operations to bring that data into
the buffer pool so that it is available in memory.  Making a few large
read requests for contiguous data can be more efficient than making
several small, spread-out requests. There are two read-ahead heuristics
in InnoDB:

   * In sequential read-ahead, if `InnoDB' notices that the access
     pattern to a segment in the tablespace is sequential, it posts in
     advance a batch of reads of database pages to the I/O system.

   * In random read-ahead, if `InnoDB' notices that some area in a
     tablespace seems to be in the process of being fully read into the
     buffer pool, it posts the remaining reads to the I/O system.

* Doublewrite Buffer *

`InnoDB' uses a novel file flush technique involving a structure called
the doublewrite buffer.  It adds safety to recovery following an
operating system crash or a power outage, and improves performance on
most varieties of Unix by reducing the need for `fsync()' operations.

Before writing pages to a data file, `InnoDB' first writes them to a
contiguous tablespace area called the doublewrite buffer. Only after
the write and the flush to the doublewrite buffer has completed does
`InnoDB' write the pages to their proper positions in the data file. If
the operating system crashes in the middle of a page write (causing a
torn page condition), `InnoDB' can later find a good copy of the page
from the doublewrite buffer during recovery.


File: manual.info,  Node: innodb-file-space,  Next: innodb-file-defragmenting,  Prev: innodb-disk-io,  Up: innodb-disk-management

14.3.12.2 File Space Management
...............................

The data files that you define in the configuration file form the
`InnoDB' system tablespace.  The files are logically concatenated to
form the tablespace. There is no striping in use. Currently, you cannot
define where within the tablespace your tables are allocated. In a
newly created tablespace, `InnoDB' allocates space starting from the
first data file.

To avoid the issues that come with storing all tables and indexes
inside the system tablespace, you can turn on the
`innodb_file_per_table' configuration option, which stores each newly
created table in a separate tablespace file (with extension `.ibd').
For tables stored this way, there is less fragmentation within the disk
file, and when the table is truncated, the space is returned to the
operating system rather than still being reserved by InnoDB within the
system tablespace.

* Pages, Extents, Segments, and Tablespaces *

Each tablespace consists of database pages with a default size of 16KB.
The pages are grouped into extents of size 1MB (64 consecutive pages).
The `files' inside a tablespace are called segments in `InnoDB'. (These
segments are different from the rollback segment, which actually
contains many tablespace segments.)

When a segment grows inside the tablespace, `InnoDB' allocates the
first 32 pages to it one at a time. After that, `InnoDB' starts to
allocate whole extents to the segment. `InnoDB' can add up to 4 extents
at a time to a large segment to ensure good sequentiality of data.

Two segments are allocated for each index in `InnoDB'. One is for
nonleaf nodes of the B-tree, the other is for the leaf nodes. Keeping
the leaf nodes contiguous on disk enables better sequential I/O
operations, because these leaf nodes contain the actual table data.

Some pages in the tablespace contain bitmaps of other pages, and
therefore a few extents in an `InnoDB' tablespace cannot be allocated
to segments as a whole, but only as individual pages.

When you ask for available free space in the tablespace by issuing a
*Note `SHOW TABLE STATUS': show-table-status. statement, `InnoDB'
reports the extents that are definitely free in the tablespace.
`InnoDB' always reserves some extents for cleanup and other internal
purposes; these reserved extents are not included in the free space.

When you delete data from a table, `InnoDB' contracts the corresponding
B-tree indexes. Whether the freed space becomes available for other
users depends on whether the pattern of deletes frees individual pages
or extents to the tablespace. Dropping a table or deleting all rows
from it is guaranteed to release the space to other users, but remember
that deleted rows are physically removed only by the purge operation,
which happens automatically some time after they are no longer needed
for transaction rollbacks or consistent reads. (See *Note
innodb-multi-versioning::.)

To see information about the tablespace, use the Tablespace Monitor.
See *Note innodb-monitors::.

* How Pages Relate to Table Rows *

The maximum row length, except for variable-length columns (*Note
`VARBINARY': binary-varbinary, *Note `VARCHAR': char, *Note `BLOB':
blob. and *Note `TEXT': blob.), is slightly less than half of a
database page. That is, the maximum row length is about 8000 bytes.
*Note `LONGBLOB': blob. and *Note `LONGTEXT': blob. columns must be
less than 4GB, and the total row length, including *Note `BLOB': blob.
and *Note `TEXT': blob. columns, must be less than 4GB.

If a row is less than half a page long, all of it is stored locally
within the page. If it exceeds half a page, variable-length columns are
chosen for external off-page storage until the row fits within half a
page. For a column chosen for off-page storage, `InnoDB' stores the
first 768 bytes locally in the row, and the rest externally into
overflow pages. Each such column has its own list of overflow pages. The
768-byte prefix is accompanied by a 20-byte value that stores the true
length of the column and points into the overflow list where the rest
of the value is stored.


File: manual.info,  Node: innodb-file-defragmenting,  Prev: innodb-file-space,  Up: innodb-disk-management

14.3.12.3 Defragmenting a Table
...............................

Random insertions into or deletions from a secondary index can cause
the index to become fragmented. Fragmentation means that the physical
ordering of the index pages on the disk is not close to the index
ordering of the records on the pages, or that there are many unused
pages in the 64-page blocks that were allocated to the index.

One symptom of fragmentation is that a table takes more space than it
`should' take. How much that is exactly, is difficult to determine. All
`InnoDB' data and indexes are stored in B-trees, and their fill factor
may vary from 50% to 100%. Another symptom of fragmentation is that a
table scan such as this takes more time than it `should' take:

     SELECT COUNT(*) FROM t WHERE NON_INDEXED_COLUMN <> 12345;

The preceding query requires MySQL to perform a full table scan, the
slowest type of query for a large table.

To speed up index scans, you can periodically perform a `null' *Note
`ALTER TABLE': alter-table.  operation, which causes MySQL to rebuild
the table:

     ALTER TABLE TBL_NAME ENGINE=INNODB

Another way to perform a defragmentation operation is to use *Note
`mysqldump': mysqldump. to dump the table to a text file, drop the
table, and reload it from the dump file.

If the insertions into an index are always ascending and records are
deleted only from the end, the `InnoDB' filespace management algorithm
guarantees that fragmentation in the index does not occur.


File: manual.info,  Node: innodb-error-handling,  Next: innodb-tuning-troubleshooting,  Prev: innodb-disk-management,  Up: innodb-storage-engine

14.3.13 `InnoDB' Error Handling
-------------------------------

* Menu:

* innodb-error-codes::           `InnoDB' Error Codes
* operating-system-error-codes::  Operating System Error Codes

Error handling in `InnoDB' is not always the same as specified in the
SQL standard. According to the standard, any error during an SQL
statement should cause rollback of that statement. `InnoDB' sometimes
rolls back only part of the statement, or the whole transaction. The
following items describe how `InnoDB' performs error handling:

   * If you run out of file space in the tablespace, a MySQL `Table is
     full' error occurs and `InnoDB' rolls back the SQL statement.

   * A transaction deadlock causes `InnoDB' to roll back the entire
     transaction. Retry the whole transaction when this happens.

     A lock wait timeout causes `InnoDB' to roll back only the single
     statement that was waiting for the lock and encountered the
     timeout. (To have the entire transaction roll back, start the
     server with the `--innodb_rollback_on_timeout' option.) Retry the
     statement if using the current behavior, or the entire transaction
     if using `--innodb_rollback_on_timeout'.

     Both deadlocks and lock wait timeouts are normal on busy servers
     and it is necessary for applications to be aware that they may
     happen and handle them by retrying. You can make them less likely
     by doing as little work as possible between the first change to
     data during a transaction and the commit, so the locks are held
     for the shortest possible time and for the smallest possible
     number of rows. Sometimes splitting work between different
     transactions may be practical and helpful.

     When a transaction rollback occurs due to a deadlock or lock wait
     timeout, it cancels the effect of the statements within the
     transaction. But if the start-transaction statement was *Note
     `START TRANSACTION': commit. or *Note `BEGIN': commit.  statement,
     rollback does not cancel that statement. Further SQL statements
     become part of the transaction until the occurrence of *Note
     `COMMIT': commit, *Note `ROLLBACK': commit, or some SQL statement
     that causes an implicit commit.

   * A duplicate-key error rolls back the SQL statement, if you have
     not specified the `IGNORE' option in your statement.

   * A `row too long error' rolls back the SQL statement.

   * Other errors are mostly detected by the MySQL layer of code (above
     the `InnoDB' storage engine level), and they roll back the
     corresponding SQL statement. Locks are not released in a rollback
     of a single SQL statement.

During implicit rollbacks, as well as during the execution of an
explicit *Note `ROLLBACK': commit. SQL statement, *Note `SHOW
PROCESSLIST': show-processlist.  displays `Rolling back' in the `State'
column for the relevant connection.


File: manual.info,  Node: innodb-error-codes,  Next: operating-system-error-codes,  Prev: innodb-error-handling,  Up: innodb-error-handling

14.3.13.1 `InnoDB' Error Codes
..............................

The following is a nonexhaustive list of common `InnoDB'-specific
errors that you may encounter, with information about why each occurs
and how to resolve the problem.

   * `1005 (ER_CANT_CREATE_TABLE)'

     Cannot create table. If the error message refers to error 150,
     table creation failed because a foreign key constraint was not
     correctly formed. If the error message refers to error -1, table
     creation probably failed because the table includes a column name
     that matched the name of an internal `InnoDB' table.

   * `1016 (ER_CANT_OPEN_FILE)'

     Cannot find the `InnoDB' table from the `InnoDB' data files,
     although the `.frm' file for the table exists. See *Note
     innodb-troubleshooting-datadict::.

   * `1114 (ER_RECORD_FILE_FULL)'

     `InnoDB' has run out of free space in the tablespace. Reconfigure
     the tablespace to add a new data file.

   * `1205 (ER_LOCK_WAIT_TIMEOUT)'

     Lock wait timeout expired. The statement that waited too long was
     rolled back (not the entire transaction). You can increase the
     value of the `innodb_lock_wait_timeout' configuration option if
     SQL statements should wait longer for other transactions to
     complete, or decrease it if too many long-running transactions are
     causing locking problems and reducing concurrency on a busy system.

   * `1206 (ER_LOCK_TABLE_FULL)'

     The total number of locks exceeds the lock table size. To avoid
     this error, increase the value of `innodb_buffer_pool_size'.
     Within an individual application, a workaround may be to break a
     large operation into smaller pieces. For example, if the error
     occurs for a large *Note `INSERT': insert, perform several smaller
     *Note `INSERT': insert. operations.

   * `1213 (ER_LOCK_DEADLOCK)'

     The transaction encountered a deadlock and was automatically rolled
     back so that your application could take corrective action. To
     recover from this error, run all the operations in this
     transaction again. A deadlock occurs when requests for locks
     arrive in inconsistent order between transactions.  The
     transaction that was rolled back released all its locks, and the
     other transaction can now get all the locks it requested. Thus
     when you re-run the transaction that was rolled back, it might
     have to wait for other transactions to complete, but typically the
     deadlock does not recur. If you encounter frequent deadlocks, make
     the sequence of locking operations (`LOCK TABLES', `SELECT ... FOR
     UPDATE', and so on) consistent between the different transactions
     or applications that experience the issue. See *Note
     innodb-deadlocks:: for details.

   * `1216 (ER_NO_REFERENCED_ROW)'

     You are trying to add a row but there is no parent row, and a
     foreign key constraint fails. Add the parent row first.

   * `1217 (ER_ROW_IS_REFERENCED)'

     You are trying to delete a parent row that has children, and a
     foreign key constraint fails. Delete the children first.


File: manual.info,  Node: operating-system-error-codes,  Prev: innodb-error-codes,  Up: innodb-error-handling

14.3.13.2 Operating System Error Codes
......................................

To print the meaning of an operating system error number, use the *Note
`perror': perror. program that comes with the MySQL distribution.

   *  *Linux System Error Codes*

     The following table provides a list of some common Linux system
     error codes. For a more complete list, see Linux source code
     (http://www.finalcog.com/c-error-codes-include-errno).

     Linux error codes associated with InnoDB file operations and other
     system calls.

     Number  Macro         Description
     1       `EPERM'       Operation not permitted
     2       `ENOENT'      No such file or directory
     3       `ESRCH'       No such process
     4       `EINTR'       Interrupted system call
     5       `EIO'         I/O error
     6       `ENXIO'       No such device or address
     7       `E2BIG'       Arg list too long
     8       `ENOEXEC'     Exec format error
     9       `EBADF'       Bad file number
     10      `ECHILD'      No child processes
     11      `EAGAIN'      Try again
     12      `ENOMEM'      Out of memory
     13      `EACCES'      Permission denied
     14      `EFAULT'      Bad address
     15      `ENOTBLK'     Block device required
     16      `EBUSY'       Device or resource busy
     17      `EEXIST'      File exists
     18      `EXDEV'       Cross-device link
     19      `ENODEV'      No such device
     20      `ENOTDIR'     Not a directory
     21      `EISDIR'      Is a directory
     22      `EINVAL'      Invalid argument
     23      `ENFILE'      File table overflow
     24      `EMFILE'      Too many open files
     25      `ENOTTY'      Inappropriate ioctl for device
     26      `ETXTBSY'     Text file busy
     27      `EFBIG'       File too large
     28      `ENOSPC'      No space left on device
     29      `ESPIPE'      File descriptor does not allow seeking
     30      `EROFS'       Read-only file system
     31      `EMLINK'      Too many links

   *  *Windows System Error Codes*

     The following table provides a list of some common Windows system
     error codes. For a complete list, see the Microsoft Web site
     (http://msdn.microsoft.com/en-us/library/ms681381.aspx).

     Windows error codes associated with InnoDB file operations and
     other system calls.

     Number  Macro         Description
     1       `ERROR_INVALID_FUNCTION'Incorrect function.
     2       `ERROR_FILE_NOT_FOUND'The system cannot find the file specified.
     3       `ERROR_PATH_NOT_FOUND'The system cannot find the path specified.
     4       `ERROR_TOO_MANY_OPEN_FILES'The system cannot open the file.
     5       `ERROR_ACCESS_DENIED'Access is denied.
     6       `ERROR_INVALID_HANDLE'The handle is invalid.
     7       `ERROR_ARENA_TRASHED'The storage control blocks were destroyed.
     8       `ERROR_NOT_ENOUGH_MEMORY'Not enough storage is available to process
                           this command.
     9       `ERROR_INVALID_BLOCK'The storage control block address is invalid.
     10      `ERROR_BAD_ENVIRONMENT'The environment is incorrect.
     11      `ERROR_BAD_FORMAT'An attempt was made to load a program with an
                           incorrect format.
     12      `ERROR_INVALID_ACCESS'The access code is invalid.
     13      `ERROR_INVALID_DATA'The data is invalid.
     14      `ERROR_OUTOFMEMORY'Not enough storage is available to complete
                           this operation.
     15      `ERROR_INVALID_DRIVE'The system cannot find the drive specified.
     16      `ERROR_CURRENT_DIRECTORY'The directory cannot be removed.
     17      `ERROR_NOT_SAME_DEVICE'The system cannot move the file to a different
                           disk drive.
     18      `ERROR_NO_MORE_FILES'There are no more files.
     19      `ERROR_WRITE_PROTECT'The media is write protected.
     20      `ERROR_BAD_UNIT'The system cannot find the device specified.
     21      `ERROR_NOT_READY'The device is not ready.
     22      `ERROR_BAD_COMMAND'The device does not recognize the command.
     23      `ERROR_CRC'   Data error (cyclic redundancy check).
     24      `ERROR_BAD_LENGTH'The program issued a command but the command
                           length is incorrect.
     25      `ERROR_SEEK'  The drive cannot locate a specific area or
                           track on the disk.
     26      `ERROR_NOT_DOS_DISK'The specified disk or diskette cannot be
                           accessed.
     27      `ERROR_SECTOR_NOT_FOUND'The drive cannot find the sector requested.
     28      `ERROR_OUT_OF_PAPER'The printer is out of paper.
     29      `ERROR_WRITE_FAULT'The system cannot write to the specified
                           device.
     30      `ERROR_READ_FAULT'The system cannot read from the specified
                           device.
     31      `ERROR_GEN_FAILURE'A device attached to the system is not
                           functioning.
     32      `ERROR_SHARING_VIOLATION'The process cannot access the file because it
                           is being used by another process.
     33      `ERROR_LOCK_VIOLATION'The process cannot access the file because
                           another process has locked a portion of the
                           file.
     34      `ERROR_WRONG_DISK'The wrong diskette is in the drive. Insert %2
                           (Volume Serial Number: %3) into drive %1.
     36      `ERROR_SHARING_BUFFER_EXCEEDED'Too many files opened for sharing.
     38      `ERROR_HANDLE_EOF'Reached the end of the file.
     39      `ERROR_HANDLE_DISK_FULL'The disk is full.
     87      `ERROR_INVALID_PARAMETER'The parameter is incorrect.
     112     `ERROR_DISK_FULL'The disk is full.
     123     `ERROR_INVALID_NAME'The file name, directory name, or volume label
                           syntax is incorrect.
     1450    `ERROR_NO_SYSTEM_RESOURCES'Insufficient system resources exist to
                           complete the requested service.


File: manual.info,  Node: innodb-tuning-troubleshooting,  Next: innodb-restrictions,  Prev: innodb-error-handling,  Up: innodb-storage-engine

14.3.14 `InnoDB' Performance Tuning and Troubleshooting
-------------------------------------------------------

* Menu:

* innodb-tuning::                `InnoDB' Performance Tuning Tips
* innodb-monitors::              `SHOW ENGINE INNODB STATUS' and the `InnoDB' Monitors
* innodb-troubleshooting::       `InnoDB' General Troubleshooting
* innodb-troubleshooting-datadict::  Troubleshooting `InnoDB' Data Dictionary Operations


File: manual.info,  Node: innodb-tuning,  Next: innodb-monitors,  Prev: innodb-tuning-troubleshooting,  Up: innodb-tuning-troubleshooting

14.3.14.1 `InnoDB' Performance Tuning Tips
..........................................

With `InnoDB' becoming the default storage engine in MySQL 5.5 and
higher, the tips and guidelines for `InnoDB' tables are now part of the
main optimization chapter. See *Note optimizing-innodb::.


File: manual.info,  Node: innodb-monitors,  Next: innodb-troubleshooting,  Prev: innodb-tuning,  Up: innodb-tuning-troubleshooting

14.3.14.2 `SHOW ENGINE INNODB STATUS' and the `InnoDB' Monitors
...............................................................

* Menu:

* innodb-standard-monitor::      `InnoDB' Standard Monitor and Lock Monitor Output
* innodb-tablespace-monitor::    `InnoDB' Tablespace Monitor Output
* innodb-table-monitor::         `InnoDB' Table Monitor Output

`InnoDB' Monitors provide information about the `InnoDB' internal
state. This information is useful for performance tuning. Each Monitor
can be enabled by creating a table with a special name, which causes
`InnoDB' to write Monitor output periodically.  Also, output for the
standard `InnoDB' Monitor is available on demand through the *Note
`SHOW ENGINE INNODB STATUS': show-engine. SQL statement.

There are several types of `InnoDB' Monitors:

   * The standard `InnoDB' Monitor displays the following types of
     information:

        * Table and record locks held by each active transaction.

        * Lock waits of a transaction.

        * Semaphore waits of threads.

        * Pending file I/O requests.

        * Buffer pool statistics.

        * Purge and insert buffer merge activity of the main `InnoDB'
          thread.

     For a discussion of `InnoDB' lock modes, see *Note
     innodb-lock-modes::.

     To enable the standard `InnoDB' Monitor for periodic output,
     create a table named `innodb_monitor'. To obtain Monitor output on
     demand, use the *Note `SHOW ENGINE INNODB STATUS': show-engine.
     SQL statement to fetch the output to your client program. If you
     are using the *Note `mysql': mysql. interactive client, the output
     is more readable if you replace the usual semicolon statement
     terminator with `\G':

          mysql> SHOW ENGINE INNODB STATUS\G

   * The `InnoDB' Lock Monitor is like the standard Monitor but also
     provides extensive lock information. To enable this Monitor for
     periodic output, create a table named `innodb_lock_monitor'.

   * The `InnoDB' Tablespace Monitor prints a list of file segments in
     the shared tablespace and validates the tablespace allocation data
     structures. To enable this Monitor for periodic output, create a
     table named `innodb_tablespace_monitor'.

   * The `InnoDB' Table Monitor prints the contents of the `InnoDB'
     internal data dictionary. To enable this Monitor for periodic
     output, create a table named `innodb_table_monitor'.

To enable an `InnoDB' Monitor for periodic output, use a `CREATE TABLE'
statement to create the table associated with the Monitor. For example,
to enable the standard `InnoDB' Monitor, create the `innodb_monitor'
table:

     CREATE TABLE innodb_monitor (a INT) ENGINE=INNODB;

To stop the Monitor, drop the table:

     DROP TABLE innodb_monitor;

The *Note `CREATE TABLE': create-table. syntax is just a way to pass a
command to the `InnoDB' engine through MySQL's SQL parser: The only
things that matter are the table name `innodb_monitor' and that it be an
`InnoDB' table. The structure of the table is not relevant at all for
the `InnoDB' Monitor.  If you shut down the server, the Monitor does
not restart automatically when you restart the server. Drop the Monitor
table and issue a new *Note `CREATE TABLE': create-table. statement to
start the Monitor. (This syntax may change in a future release.)

The `PROCESS' privilege is required to start or stop the `InnoDB'
Monitor tables.

When you enable `InnoDB' Monitors for periodic output, `InnoDB' writes
their output to the *Note `mysqld': mysqld. server standard error output
(`stderr'). In this case, no output is sent to clients. When switched
on, `InnoDB' Monitors print data about every 15 seconds. Server output
usually is directed to the error log (see *Note error-log::).  This
data is useful in performance tuning. On Windows, start the server from
a command prompt in a console window with the `--console' option if you
want to direct the output to the window rather than to the error log.

`InnoDB' sends diagnostic output to `stderr' or to files rather than to
`stdout' or fixed-size memory buffers, to avoid potential buffer
overflows. As a side effect, the output of *Note `SHOW ENGINE INNODB
STATUS': show-engine. is written to a status file in the MySQL data
directory every fifteen seconds. The name of the file is
`innodb_status.PID', where PID is the server process ID.  `InnoDB'
removes the file for a normal shutdown. If abnormal shutdowns have
occurred, instances of these status files may be present and must be
removed manually.  Before removing them, you might want to examine them
to see whether they contain useful information about the cause of
abnormal shutdowns. The `innodb_status.PID' file is created only if the
configuration option `innodb-status-file=1' is set.

`InnoDB' Monitors should be enabled only when you actually want to see
Monitor information because output generation does result in some
performance decrement. Also, if you enable monitor output by creating
the associated table, your error log may become quite large if you
forget to remove the table later.

For additional information about `InnoDB' monitors, see:

   * Mark Leith: InnoDB Table and Tablespace Monitors
     (http://www.markleith.co.uk/?p=25)

Each monitor begins with a header containing a timestamp and the
monitor name. For example:

     ================================================
     090407 12:06:19 INNODB TABLESPACE MONITOR OUTPUT
     ================================================

The header for the standard Monitor (`INNODB MONITOR OUTPUT') is also
used for the Lock Monitor because the latter produces the same output
with the addition of extra lock information.

The following sections describe the output for each Monitor.


File: manual.info,  Node: innodb-standard-monitor,  Next: innodb-tablespace-monitor,  Prev: innodb-monitors,  Up: innodb-monitors

14.3.14.3 `InnoDB' Standard Monitor and Lock Monitor Output
...........................................................

The Lock Monitor is the same as the standard Monitor except that it
includes additional lock information. Enabling either monitor for
periodic output by creating the associated `InnoDB' table turns on the
same output stream, but the stream includes the extra information if the
Lock Monitor is enabled. For example, if you create the
`innodb_monitor' and `innodb_lock_monitor' tables, that turns on a
single output stream. The stream includes extra lock information until
you disable the Lock Monitor by removing the `innodb_lock_monitor'
table.

Example `InnoDB' Monitor output:

     mysql> SHOW ENGINE INNODB STATUS\G
     *************************** 1. row ***************************
     Status:
     =====================================
     030709 13:00:59 INNODB MONITOR OUTPUT
     =====================================
     Per second averages calculated from the last 18 seconds
     ----------
     BACKGROUND THREAD
     ----------
     srv_master_thread loops: 53 1_second, 44 sleeps, 5 10_second, 7 background,
       7 flush
     srv_master_thread log flush and writes: 48
     ----------
     SEMAPHORES
     ----------
     OS WAIT ARRAY INFO: reservation count 413452, signal count 378357
     --Thread 32782 has waited at btr0sea.c line 1477 for 0.00 seconds the
     semaphore: X-lock on RW-latch at 41a28668 created in file btr0sea.c line 135
     a writer (thread id 32782) has reserved it in mode wait exclusive
     number of readers 1, waiters flag 1
     Last time read locked in file btr0sea.c line 731
     Last time write locked in file btr0sea.c line 1347
     Mutex spin waits 0, rounds 0, OS waits 0
     RW-shared spins 2, rounds 60, OS waits 2
     RW-excl spins 0, rounds 0, OS waits 0
     Spin rounds per wait: 0.00 mutex, 20.00 RW-shared, 0.00 RW-excl
     ------------------------
     LATEST FOREIGN KEY ERROR
     ------------------------
     030709 13:00:59 Transaction:
     TRANSACTION 0 290328284, ACTIVE 0 sec, process no 3195
     inserting
     15 lock struct(s), heap size 2496, undo log entries 9
     MySQL thread id 25, query id 4668733 localhost heikki update
     insert into ibtest11a (D, B, C) values (5, 'khDk' ,'khDk')
     Foreign key constraint fails for table test/ibtest11a:
     ,
       CONSTRAINT `0_219242` FOREIGN KEY (`A`, `D`) REFERENCES `ibtest11b` (`A`,
       `D`) ON DELETE CASCADE ON UPDATE CASCADE
     Trying to add in child table, in index PRIMARY tuple:
      0: len 4; hex 80000101; asc ....;; 1: len 4; hex 80000005; asc ....;; 2:
      len 4; hex 6b68446b; asc khDk;; 3: len 6; hex 0000114e0edc; asc ...N..;; 4:
      len 7; hex 00000000c3e0a7; asc .......;; 5: len 4; hex 6b68446b; asc khDk;;
     But in parent table test/ibtest11b, in index PRIMARY,
     the closest match we can find is record:
     RECORD: info bits 0 0: len 4; hex 8000015b; asc ...[;; 1: len 4; hex
     80000005; asc ....;; 2: len 3; hex 6b6864; asc khd;; 3: len 6; hex
     0000111ef3eb; asc ......;; 4: len 7; hex 800001001e0084; asc .......;; 5:
     len 3; hex 6b6864; asc khd;;
     ------------------------
     LATEST DETECTED DEADLOCK
     ------------------------
     030709 12:59:58
     *** (1) TRANSACTION:
     TRANSACTION 0 290252780, ACTIVE 1 sec, process no 3185
     inserting
     LOCK WAIT 3 lock struct(s), heap size 320, undo log entries 146
     MySQL thread id 21, query id 4553379 localhost heikki update
     INSERT INTO alex1 VALUES(86, 86, 794,'aA35818','bb','c79166','d4766t',
     'e187358f','g84586','h794',date_format('2001-04-03 12:54:22','%Y-%m-%d
     %H:%i'),7
     *** (1) WAITING FOR THIS LOCK TO BE GRANTED:
     RECORD LOCKS space id 0 page no 48310 n bits 568 table test/alex1 index
     symbole trx id 0 290252780 lock mode S waiting
     Record lock, heap no 324 RECORD: info bits 0 0: len 7; hex 61613335383138;
     asc aa35818;; 1:
     *** (2) TRANSACTION:
     TRANSACTION 0 290251546, ACTIVE 2 sec, process no 3190
     inserting
     130 lock struct(s), heap size 11584, undo log entries 437
     MySQL thread id 23, query id 4554396 localhost heikki update
     REPLACE INTO alex1 VALUES(NULL, 32, NULL,'aa3572','','c3572','d6012t','',
     NULL,'h396', NULL, NULL, 7.31,7.31,7.31,200)
     *** (2) HOLDS THE LOCK(S):
     RECORD LOCKS space id 0 page no 48310 n bits 568 table test/alex1 index
     symbole trx id 0 290251546 lock_mode X locks rec but not gap
     Record lock, heap no 324 RECORD: info bits 0 0: len 7; hex 61613335383138;
     asc aa35818;; 1:
     *** (2) WAITING FOR THIS LOCK TO BE GRANTED:
     RECORD LOCKS space id 0 page no 48310 n bits 568 table test/alex1 index
     symbole trx id 0 290251546 lock_mode X locks gap before rec insert intention
     waiting
     Record lock, heap no 82 RECORD: info bits 0 0: len 7; hex 61613335373230;
     asc aa35720;; 1:
     *** WE ROLL BACK TRANSACTION (1)
     ------------
     TRANSACTIONS
     ------------
     Trx id counter 0 290328385
     Purge done for trx's n:o < 0 290315608 undo n:o < 0 17
     History list length 20
     Total number of lock structs in row lock hash table 70
     LIST OF TRANSACTIONS FOR EACH SESSION:
     ---TRANSACTION 0 0, not started, process no 3491
     MySQL thread id 32, query id 4668737 localhost heikki
     show innodb status
     ---TRANSACTION 0 290328384, ACTIVE 0 sec, process no 3205
     38929 inserting
     1 lock struct(s), heap size 320
     MySQL thread id 29, query id 4668736 localhost heikki update
     insert into speedc values (1519229,1, 'hgjhjgghggjgjgjgjgjggjgjgjgjgjgggjgjg
     jlhhgghggggghhjhghgggggghjhghghghghghhhhghghghjhhjghjghjkghjghjghjghjfhjfh
     ---TRANSACTION 0 290328383, ACTIVE 0 sec, process no 3180
     28684 committing
     1 lock struct(s), heap size 320, undo log entries 1
     MySQL thread id 19, query id 4668734 localhost heikki update
     insert into speedcm values (1603393,1, 'hgjhjgghggjgjgjgjgjggjgjgjgjgjgggjgj
     gjlhhgghggggghhjhghgggggghjhghghghghghhhhghghghjhhjghjghjkghjghjghjghjfhjf
     ---TRANSACTION 0 290328327, ACTIVE 0 sec, process no 3200
     36880 starting index read
     LOCK WAIT 2 lock struct(s), heap size 320
     MySQL thread id 27, query id 4668644 localhost heikki Searching rows for
     update
     update ibtest11a set B = 'kHdkkkk' where A = 89572
     ------- TRX HAS BEEN WAITING 0 SEC FOR THIS LOCK TO BE GRANTED:
     RECORD LOCKS space id 0 page no 65556 n bits 232 table test/ibtest11a index
     PRIMARY trx id 0 290328327 lock_mode X waiting
     Record lock, heap no 1 RECORD: info bits 0 0: len 9; hex 73757072656d756d00;
     asc supremum.;;
     ------------------
     ---TRANSACTION 0 290328284, ACTIVE 0 sec, process no 3195
     34831 rollback of SQL statement
     ROLLING BACK 14 lock struct(s), heap size 2496, undo log entries 9
     MySQL thread id 25, query id 4668733 localhost heikki update
     insert into ibtest11a (D, B, C) values (5, 'khDk' ,'khDk')
     ---TRANSACTION 0 290327208, ACTIVE 1 sec, process no 3190
     32782
     58 lock struct(s), heap size 5504, undo log entries 159
     MySQL thread id 23, query id 4668732 localhost heikki update
     REPLACE INTO alex1 VALUES(86, 46, 538,'aa95666','bb','c95666','d9486t',
     'e200498f','g86814','h538',date_format('2001-04-03 12:54:22','%Y-%m-%d
     %H:%i'),
     ---TRANSACTION 0 290323325, ACTIVE 3 sec, process no 3185
     30733 inserting
     4 lock struct(s), heap size 1024, undo log entries 165
     MySQL thread id 21, query id 4668735 localhost heikki update
     INSERT INTO alex1 VALUES(NULL, 49, NULL,'aa42837','','c56319','d1719t','',
     NULL,'h321', NULL, NULL, 7.31,7.31,7.31,200)
     --------
     FILE I/O
     --------
     I/O thread 0 state: waiting for i/o request (insert buffer thread)
     I/O thread 1 state: waiting for i/o request (log thread)
     I/O thread 2 state: waiting for i/o request (read thread)
     I/O thread 3 state: waiting for i/o request (write thread)
     Pending normal aio reads: 0, aio writes: 0,
      ibuf aio reads: 0, log i/o's: 0, sync i/o's: 0
     Pending flushes (fsync) log: 0; buffer pool: 0
     151671 OS file reads, 94747 OS file writes, 8750 OS fsyncs
     25.44 reads/s, 18494 avg bytes/read, 17.55 writes/s, 2.33 fsyncs/s
     -------------------------------------
     INSERT BUFFER AND ADAPTIVE HASH INDEX
     -------------------------------------
     Ibuf for space 0: size 1, free list len 19, seg size 21,
     85004 inserts, 85004 merged recs, 26669 merges
     Hash table size 207619, used cells 14461, node heap has 16 buffer(s)
     1877.67 hash searches/s, 5121.10 non-hash searches/s
     ---
     LOG
     ---
     Log sequence number 18 1212842764
     Log flushed up to   18 1212665295
     Last checkpoint at  18 1135877290
     0 pending log writes, 0 pending chkp writes
     4341 log i/o's done, 1.22 log i/o's/second
     ----------------------
     BUFFER POOL AND MEMORY
     ----------------------
     Total memory allocated 84966343; in additional pool allocated 1402624
     Buffer pool size   3200
     Free buffers       110
     Database pages     3074
     Modified db pages  2674
     Pending reads 0
     Pending writes: LRU 0, flush list 0, single page 0
     Pages read 171380, created 51968, written 194688
     28.72 reads/s, 20.72 creates/s, 47.55 writes/s
     Buffer pool hit rate 999 / 1000
     --------------
     ROW OPERATIONS
     --------------
     0 queries inside InnoDB, 0 queries in queue
     Main thread process no. 3004, id 7176, state: purging
     Number of rows inserted 3738558, updated 127415, deleted 33707, read 755779
     1586.13 inserts/s, 50.89 updates/s, 28.44 deletes/s, 107.88 reads/s
     ----------------------------
     END OF INNODB MONITOR OUTPUT
     ============================

`InnoDB' Monitor output is limited to 1MB when produced using the *Note
`SHOW ENGINE INNODB STATUS': show-engine. statement. This limit does
not apply to output written to the server's error output.

Some notes on the output sections:

*`Status'*

This section shows the timestamp, the monitor name, and the number of
seconds that per-second averages are based on. The number of seconds is
the elapsed time between the current time and the last time `InnoDB'
Monitor output was printed.

*`BACKGROUND THREAD'*

The `srv_master_thread' lines shows work done by the main background
thread.

*`SEMAPHORES'*

This section reports threads waiting for a semaphore and statistics on
how many times threads have needed a spin or a wait on a mutex or a
rw-lock semaphore. A large number of threads waiting for semaphores may
be a result of disk I/O, or contention problems inside `InnoDB'.
Contention can be due to heavy parallelism of queries or problems in
operating system thread scheduling. Setting the
`innodb_thread_concurrency' system variable smaller than the default
value might help in such situations. The `Spin rounds per wait' line
shows the number of spinlock rounds per OS wait for a mutex.

*`LATEST FOREIGN KEY ERROR'*

This section provides information about the most recent foreign key
constraint error. It is not present if no such error has occurred. The
contents include the statement that failed as well as information about
the constraint that failed and the referenced and referencing tables.

*`LATEST DETECTED DEADLOCK'*

This section provides information about the most recent deadlock. It is
not present if no deadlock has occurred. The contents show which
transactions are involved, the statement each was attempting to
execute, the locks they have and need, and which transaction `InnoDB'
decided to roll back to break the deadlock. The lock modes reported in
this section are explained in *Note innodb-lock-modes::.

*`TRANSACTIONS'*

If this section reports lock waits, your applications might have lock
contention. The output can also help to trace the reasons for
transaction deadlocks.

*`FILE I/O'*

This section provides information about threads that `InnoDB' uses to
perform various types of I/O. The first few of these are dedicated to
general `InnoDB' processing. The contents also display information for
pending I/O operations and statistics for I/O performance.

The number of these threads are controlled by the
`innodb_read_io_threads' and `innodb_write_io_threads' parameters. See
*Note innodb-parameters::.

*`INSERT BUFFER AND ADAPTIVE HASH INDEX'*

This section shows the status of the `InnoDB' insert buffer and
adaptive hash index. (See *Note innodb-insert-buffering::, and *Note
innodb-adaptive-hash::.) The contents include the number of operations
performed for each, plus statistics for hash index performance.

*`LOG'*

This section displays information about the `InnoDB' log. The contents
include the current log sequence number, how far the log has been
flushed to disk, and the position at which `InnoDB' last took a
checkpoint. (See *Note innodb-checkpoints::.) The section also displays
information about pending writes and write performance statistics.

*`BUFFER POOL AND MEMORY'*

This section gives you statistics on pages read and written.  You can
calculate from these numbers how many data file I/O operations your
queries currently are doing.

For additional information about the operation of the buffer pool, see
*Note innodb-buffer-pool::.

*`ROW OPERATIONS'*

This section shows what the main thread is doing, including the number
and performance rate for each type of row operation.

In MySQL 5.5, output from the standard Monitor includes additional
sections compared to the output for previous versions. For details, see
*Note monitoring-improvements::.


File: manual.info,  Node: innodb-tablespace-monitor,  Next: innodb-table-monitor,  Prev: innodb-standard-monitor,  Up: innodb-monitors

14.3.14.4 `InnoDB' Tablespace Monitor Output
............................................

The `InnoDB' Tablespace Monitor prints information about the file
segments in the shared tablespace and validates the tablespace
allocation data structures. If you use individual tablespaces by
enabling `innodb_file_per_table', the Tablespace Monitor does not
describe those tablespaces.

Example `InnoDB' Tablespace Monitor output:

     ================================================
     090408 21:28:09 INNODB TABLESPACE MONITOR OUTPUT
     ================================================
     FILE SPACE INFO: id 0
     size 13440, free limit 3136, free extents 28
     not full frag extents 2: used pages 78, full frag extents 3
     first seg id not used 0 23845
     SEGMENT id 0 1 space 0; page 2; res 96 used 46; full ext 0
     fragm pages 32; free extents 0; not full extents 1: pages 14
     SEGMENT id 0 2 space 0; page 2; res 1 used 1; full ext 0
     fragm pages 1; free extents 0; not full extents 0: pages 0
     SEGMENT id 0 3 space 0; page 2; res 1 used 1; full ext 0
     fragm pages 1; free extents 0; not full extents 0: pages 0
     ...
     SEGMENT id 0 15 space 0; page 2; res 160 used 160; full ext 2
     fragm pages 32; free extents 0; not full extents 0: pages 0
     SEGMENT id 0 488 space 0; page 2; res 1 used 1; full ext 0
     fragm pages 1; free extents 0; not full extents 0: pages 0
     SEGMENT id 0 17 space 0; page 2; res 1 used 1; full ext 0
     fragm pages 1; free extents 0; not full extents 0: pages 0
     ...
     SEGMENT id 0 171 space 0; page 2; res 592 used 481; full ext 7
     fragm pages 16; free extents 0; not full extents 2: pages 17
     SEGMENT id 0 172 space 0; page 2; res 1 used 1; full ext 0
     fragm pages 1; free extents 0; not full extents 0: pages 0
     SEGMENT id 0 173 space 0; page 2; res 96 used 44; full ext 0
     fragm pages 32; free extents 0; not full extents 1: pages 12
     ...
     SEGMENT id 0 601 space 0; page 2; res 1 used 1; full ext 0
     fragm pages 1; free extents 0; not full extents 0: pages 0
     NUMBER of file segments: 73
     Validating tablespace
     Validation ok
     ---------------------------------------
     END OF INNODB TABLESPACE MONITOR OUTPUT
     =======================================

The Tablespace Monitor output includes information about the shared
tablespace as a whole, followed by a list containing a breakdown for
each segment within the tablespace.

The tablespace consists of database pages with a default size of 16KB.
The pages are grouped into extents of size 1MB (64 consecutive pages).

The initial part of the output that displays overall tablespace
information has this format:

     FILE SPACE INFO: id 0
     size 13440, free limit 3136, free extents 28
     not full frag extents 2: used pages 78, full frag extents 3
     first seg id not used 0 23845

Overall tablespace information includes these values:

   * `id': The tablespace ID. A value of 0 refers to the shared
     tablespace.

   * `size': The current tablespace size in pages.

   * `free limit': The minimum page number for which the free list has
     not been initialized. Pages at or above this limit are free.

   * `free extents': The number of free extents.

   * `not full frag extents', `used pages': The number of fragment
     extents that are not completely filled, and the number of pages in
     those extents that have been allocated.

   * `full frag extents': The number of completely full fragment
     extents.

   * `first seg id not used': The first unused segment ID.

Individual segment information has this format:

     SEGMENT id 0 15 space 0; page 2; res 160 used 160; full ext 2
     fragm pages 32; free extents 0; not full extents 0: pages 0

Segment information includes these values:

`id': The segment ID.

`space', `page': The tablespace number and page within the tablespace
where the segment `inode' is located. A tablespace number of 0
indicates the shared tablespace.  `InnoDB' uses inodes to keep track of
segments in the tablespace. The other fields displayed for a segment
(`id', `res', and so forth) are derived from information in the inode.

`res': The number of pages allocated (reserved) for the segment.

`used': The number of allocated pages in use by the segment.

`full ext': The number of extents allocated for the segment that are
completely used.

`fragm pages': The number of initial pages that have been allocated to
the segment.

`free extents': The number of extents allocated for the segment that
are completely unused.

`not full extents': The number of extents allocated for the segment
that are partially used.

`pages': The number of pages used within the not-full extents.

When a segment grows, it starts as a single page, and `InnoDB'
allocates the first pages for it individually, up to 32 pages (this is
the `fragm pages' value). After that, `InnoDB' allocates complete
64-page extents. `InnoDB' can add up to 4 extents at a time to a large
segment to ensure good sequentiality of data.

For the example segment shown earlier, it has 32 fragment pages, plus 2
full extents (64 pages each), for a total of 160 pages used out of 160
pages allocated. The following segment has 32 fragment pages and one
partially full extent using 14 pages for a total of 46 pages used out
of 96 pages allocated:

     SEGMENT id 0 1 space 0; page 2; res 96 used 46; full ext 0
     fragm pages 32; free extents 0; not full extents 1: pages 14

It is possible for a segment that has extents allocated to it to have a
`fragm pages' value less than 32 if some of the individual pages have
been deallocated subsequent to extent allocation.


File: manual.info,  Node: innodb-table-monitor,  Prev: innodb-tablespace-monitor,  Up: innodb-monitors

14.3.14.5 `InnoDB' Table Monitor Output
.......................................

The `InnoDB' Table Monitor prints the contents of the `InnoDB' internal
data dictionary.

The output contains one section per table. The `SYS_FOREIGN' and
`SYS_FOREIGN_COLS' sections are for internal data dictionary tables
that maintain information about foreign keys. There are also sections
for the Table Monitor table and each user-created `InnoDB' table.
Suppose that the following two tables have been created in the `test'
database:

     CREATE TABLE parent
     (
       par_id    INT NOT NULL,
       fname      CHAR(20),
       lname      CHAR(20),
       PRIMARY KEY (par_id),
       UNIQUE INDEX (lname, fname)
     ) ENGINE = INNODB;

     CREATE TABLE child
     (
       par_id      INT NOT NULL,
       child_id    INT NOT NULL,
       name        VARCHAR(40),
       birth       DATE,
       weight      DECIMAL(10,2),
       misc_info   VARCHAR(255),
       last_update TIMESTAMP,
       PRIMARY KEY (par_id, child_id),
       INDEX (name),
       FOREIGN KEY (par_id) REFERENCES parent (par_id)
         ON DELETE CASCADE
         ON UPDATE CASCADE
     ) ENGINE = INNODB;

Then the Table Monitor output will look something like this
(reformatted slightly):

     ===========================================
     090420 12:09:32 INNODB TABLE MONITOR OUTPUT
     ===========================================
     --------------------------------------
     TABLE: name SYS_FOREIGN, id 0 11, columns 7, indexes 3, appr.rows 1
       COLUMNS: ID: DATA_VARCHAR DATA_ENGLISH len 0;
                FOR_NAME: DATA_VARCHAR DATA_ENGLISH len 0;
                REF_NAME: DATA_VARCHAR DATA_ENGLISH len 0;
                N_COLS: DATA_INT len 4;
                DB_ROW_ID: DATA_SYS prtype 256 len 6;
                DB_TRX_ID: DATA_SYS prtype 257 len 6;
       INDEX: name ID_IND, id 0 11, fields 1/6, uniq 1, type 3
        root page 46, appr.key vals 1, leaf pages 1, size pages 1
        FIELDS:  ID DB_TRX_ID DB_ROLL_PTR FOR_NAME REF_NAME N_COLS
       INDEX: name FOR_IND, id 0 12, fields 1/2, uniq 2, type 0
        root page 47, appr.key vals 1, leaf pages 1, size pages 1
        FIELDS:  FOR_NAME ID
       INDEX: name REF_IND, id 0 13, fields 1/2, uniq 2, type 0
        root page 48, appr.key vals 1, leaf pages 1, size pages 1
        FIELDS:  REF_NAME ID
     --------------------------------------
     TABLE: name SYS_FOREIGN_COLS, id 0 12, columns 7, indexes 1, appr.rows 1
       COLUMNS: ID: DATA_VARCHAR DATA_ENGLISH len 0;
                POS: DATA_INT len 4;
                FOR_COL_NAME: DATA_VARCHAR DATA_ENGLISH len 0;
                REF_COL_NAME: DATA_VARCHAR DATA_ENGLISH len 0;
                DB_ROW_ID: DATA_SYS prtype 256 len 6;
                DB_TRX_ID: DATA_SYS prtype 257 len 6;
       INDEX: name ID_IND, id 0 14, fields 2/6, uniq 2, type 3
        root page 49, appr.key vals 1, leaf pages 1, size pages 1
        FIELDS:  ID POS DB_TRX_ID DB_ROLL_PTR FOR_COL_NAME REF_COL_NAME
     --------------------------------------
     TABLE: name test/child, id 0 14, columns 10, indexes 2, appr.rows 201
       COLUMNS: par_id: DATA_INT DATA_BINARY_TYPE DATA_NOT_NULL len 4;
                child_id: DATA_INT DATA_BINARY_TYPE DATA_NOT_NULL len 4;
                name: DATA_VARCHAR prtype 524303 len 40;
                birth: DATA_INT DATA_BINARY_TYPE len 3;
                weight: DATA_FIXBINARY DATA_BINARY_TYPE len 5;
                misc_info: DATA_VARCHAR prtype 524303 len 255;
                last_update: DATA_INT DATA_UNSIGNED DATA_BINARY_TYPE DATA_NOT_NULL len 4;
                DB_ROW_ID: DATA_SYS prtype 256 len 6;
                DB_TRX_ID: DATA_SYS prtype 257 len 6;
       INDEX: name PRIMARY, id 0 17, fields 2/9, uniq 2, type 3
        root page 52, appr.key vals 201, leaf pages 5, size pages 6
        FIELDS:  par_id child_id DB_TRX_ID DB_ROLL_PTR name birth weight misc_info last_update
       INDEX: name name, id 0 18, fields 1/3, uniq 3, type 0
        root page 53, appr.key vals 210, leaf pages 1, size pages 1
        FIELDS:  name par_id child_id
       FOREIGN KEY CONSTRAINT test/child_ibfk_1: test/child ( par_id )
                  REFERENCES test/parent ( par_id )
     --------------------------------------
     TABLE: name test/innodb_table_monitor, id 0 15, columns 4, indexes 1, appr.rows 0
       COLUMNS: i: DATA_INT DATA_BINARY_TYPE len 4;
                DB_ROW_ID: DATA_SYS prtype 256 len 6;
                DB_TRX_ID: DATA_SYS prtype 257 len 6;
       INDEX: name GEN_CLUST_INDEX, id 0 19, fields 0/4, uniq 1, type 1
        root page 193, appr.key vals 0, leaf pages 1, size pages 1
        FIELDS:  DB_ROW_ID DB_TRX_ID DB_ROLL_PTR i
     --------------------------------------
     TABLE: name test/parent, id 0 13, columns 6, indexes 2, appr.rows 299
       COLUMNS: par_id: DATA_INT DATA_BINARY_TYPE DATA_NOT_NULL len 4;
                fname: DATA_CHAR prtype 524542 len 20;
                lname: DATA_CHAR prtype 524542 len 20;
                DB_ROW_ID: DATA_SYS prtype 256 len 6;
                DB_TRX_ID: DATA_SYS prtype 257 len 6;
       INDEX: name PRIMARY, id 0 15, fields 1/5, uniq 1, type 3
        root page 50, appr.key vals 299, leaf pages 2, size pages 3
        FIELDS:  par_id DB_TRX_ID DB_ROLL_PTR fname lname
       INDEX: name lname, id 0 16, fields 2/3, uniq 2, type 2
        root page 51, appr.key vals 300, leaf pages 1, size pages 1
        FIELDS:  lname fname par_id
       FOREIGN KEY CONSTRAINT test/child_ibfk_1: test/child ( par_id )
                  REFERENCES test/parent ( par_id )
     -----------------------------------
     END OF INNODB TABLE MONITOR OUTPUT
     ==================================

For each table, Table Monitor output contains a section that displays
general information about the table and specific information about its
columns, indexes, and foreign keys.

The general information for each table includes the table name (in
`DB_NAME/TBL_NAME' format except for internal tables), its ID, the
number of columns and indexes, and an approximate row count.

The `COLUMNS' part of a table section lists each column in the table.
Information for each column indicates its name and data type
characteristics. Some internal columns are added by `InnoDB', such as
`DB_ROW_ID' (row ID), `DB_TRX_ID' (transaction ID), and `DB_ROLL_PTR'
(a pointer to the rollback/undo data).

   * `DATA_XXX': These symbols indicate the data type. There may be
     multiple `DATA_XXX' symbols for a given column.

   * `prtype': The column's `precise' type. This field includes
     information such as the column data type, character set code,
     nullability, signedness, and whether it is a binary string. This
     field is described in the `innobase/include/data0type.h' source
     file.

   * `len': The column length in bytes.

Each `INDEX' part of the table section provides the name and
characteristics of one table index:

   * `name': The index name. If the name is `PRIMARY', the index is a
     primary key. If the name is `GEN_CLUST_INDEX', the index is the
     clustered index that is created automatically if the table
     definition doesn't include a primary key or non-`NULL' unique
     index. See *Note innodb-index-types::.

   * `id': The index ID.

   * `fields': The number of fields in the index, as a value in `M/N'
     format:

        * M is the number of user-defined columns; that is, the number
          of columns you would see in the index definition in a `CREATE
          TABLE' statement.

        * N is the total number of index columns, including those added
          internally. For the clustered index, the total includes the
          other columns in the table definition, plus any columns added
          internally. For a secondary index, the total includes the
          columns from the primary key that are not part of the
          secondary index.

   * `uniq': The number of leading fields that are enough to determine
     index values uniquely.

   * `type': The index type. This is a bit field. For example, 1
     indicates a clustered index and 2 indicates a unique index, so a
     clustered index (which always contains unique values), will have a
     `type' value of 3. An index with a `type' value of 0 is neither
     clustered nor unique. The flag values are defined in the
     `innobase/include/dict0mem.h' source file.

   * `root page': The index root page number.

   * `appr. key vals': The approximate index cardinality.

   * `leaf pages': The approximate number of leaf pages in the index.

   * `size pages': The approximate total number of pages in the index.

   * `FIELDS': The names of the fields in the index. For a clustered
     index that was generated automatically, the field list begins with
     the internal `DB_ROW_ID' (row ID) field.  `DB_TRX_ID' and
     `DB_ROLL_PTR' are always added internally to the clustered index,
     following the fields that comprise the primary key. For a
     secondary index, the final fields are those from the primary key
     that are not part of the secondary index.

The end of the table section lists the `FOREIGN KEY' definitions that
apply to the table. This information appears whether the table is a
referencing or referenced table.


File: manual.info,  Node: innodb-troubleshooting,  Next: innodb-troubleshooting-datadict,  Prev: innodb-monitors,  Up: innodb-tuning-troubleshooting

14.3.14.6 `InnoDB' General Troubleshooting
..........................................

The following general guidelines apply to troubleshooting `InnoDB'
problems:

   * When an operation fails or you suspect a bug, look at the MySQL
     server error log (see *Note error-log::).

   * If the failure is related to a deadlock, run with the
     `innodb_print_all_deadlocks' option enabled so that details about
     each `InnoDB' deadlock are printed to the MySQL server error log.

   * Issues relating to the `InnoDB' data dictionary include failed
     *Note `CREATE TABLE': create-table. statements (orphaned table
     files), inability to open `.InnoDB' files, and `system cannot find
     the path specified' errors. For information about these sorts of
     problems and errors, see *Note innodb-troubleshooting-datadict::.

   * When troubleshooting, it is usually best to run the MySQL server
     from the command prompt, rather than through *Note `mysqld_safe':
     mysqld-safe. or as a Windows service. You can then see what *Note
     `mysqld': mysqld. prints to the console, and so have a better
     grasp of what is going on. On Windows, start *Note `mysqld':
     mysqld. with the `--console' option to direct the output to the
     console window.

   * Use the `InnoDB' Monitors to obtain information about a problem
     (see *Note innodb-monitors::). If the problem is
     performance-related, or your server appears to be hung, you should
     use the standard Monitor to print information about the internal
     state of `InnoDB'. If the problem is with locks, use the Lock
     Monitor. If the problem is in creation of tables or other data
     dictionary operations, use the Table Monitor to print the contents
     of the `InnoDB' internal data dictionary. To see tablespace
     information use the Tablespace Monitor.

   * If you suspect that a table is corrupt, run *Note `CHECK TABLE':
     check-table. on that table.


File: manual.info,  Node: innodb-troubleshooting-datadict,  Prev: innodb-troubleshooting,  Up: innodb-tuning-troubleshooting

14.3.14.7 Troubleshooting `InnoDB' Data Dictionary Operations
.............................................................

Information about table definitions is stored both in the `.frm' files,
and in the InnoDB data dictionary. If you move `.frm' files around, or
if the server crashes in the middle of a data dictionary operation,
these sources of information can become inconsistent.

* Problem with CREATE TABLE *

A symptom of an out-of-sync data dictionary is that a *Note `CREATE
TABLE': create-table. statement fails. If this occurs, look in the
server's error log. If the log says that the table already exists
inside the `InnoDB' internal data dictionary, you have an orphaned
table inside the `InnoDB' tablespace files that has no corresponding
`.frm' file.  The error message looks like this:

     InnoDB: Error: table test/parent already exists in InnoDB internal
     InnoDB: data dictionary. Have you deleted the .frm file
     InnoDB: and not used DROP TABLE? Have you used DROP DATABASE
     InnoDB: for InnoDB tables in MySQL version <= 3.23.43?
     InnoDB: See the Restrictions section of the InnoDB manual.
     InnoDB: You can drop the orphaned table inside InnoDB by
     InnoDB: creating an InnoDB table with the same name in another
     InnoDB: database and moving the .frm file to the current database.
     InnoDB: Then MySQL thinks the table exists, and DROP TABLE will
     InnoDB: succeed.

You can drop the orphaned table by following the instructions given in
the error message. If you are still unable to use *Note `DROP TABLE':
drop-table. successfully, the problem may be due to name completion in
the *Note `mysql': mysql. client. To work around this problem, start
the *Note `mysql': mysql. client with the `--skip-auto-rehash' option
and try *Note `DROP TABLE': drop-table. again.  (With name completion
on, *Note `mysql': mysql. tries to construct a list of table names,
which fails when a problem such as just described exists.)

* Problem Opening Table *

Another symptom of an out-of-sync data dictionary is that MySQL prints
an error that it cannot open a `.InnoDB' file:

     ERROR 1016: Can't open file: 'child2.InnoDB'. (errno: 1)

In the error log you can find a message like this:

     InnoDB: Cannot find table test/child2 from the internal data dictionary
     InnoDB: of InnoDB though the .frm file for the table exists. Maybe you
     InnoDB: have deleted and recreated InnoDB data files but have forgotten
     InnoDB: to delete the corresponding .frm files of InnoDB tables?

This means that there is an orphaned `.frm' file without a
corresponding table inside `InnoDB'. You can drop the orphaned `.frm'
file by deleting it manually.

* Problem with Temporary Table *

If MySQL crashes in the middle of an *Note `ALTER TABLE': alter-table.
operation, you may end up with an orphaned temporary table inside the
`InnoDB' tablespace.  Using the Table Monitor, you can see listed a
table with a name that begins with `#sql-'. You can perform SQL
statements on tables whose name contains the character ``#'' if you
enclose the name within backticks. Thus, you can drop such an orphaned
table like any other orphaned table using the method described earlier.
To copy or rename a file in the Unix shell, you need to put the file
name in double quotation marks if the file name contains ``#''.

* Problem with Missing Tablespace *

With `innodb_file_per_table' enabled, the following message might occur
if the `.frm' or `.ibd' files (or both) are missing:

     InnoDB: in InnoDB data dictionary has tablespace id N,
     InnoDB: but tablespace with that id or name does not exist. Have
     InnoDB: you deleted or moved .ibd files?
     InnoDB: This may also be a table created with CREATE TEMPORARY TABLE
     InnoDB: whose .ibd and .frm files MySQL automatically removed, but the
     InnoDB: table still exists in the InnoDB internal data dictionary.

If this occurs, try the following procedure to resolve the problem:

  1. Create a matching `.frm' file in some other database directory and
     copy it to the database directory where the orphan table is
     located.

  2. Issue *Note `DROP TABLE': drop-table. for the original table. That
     should successfully drop the table and `InnoDB' should print a
     warning to the error log that the `.ibd' file was missing.


File: manual.info,  Node: innodb-restrictions,  Prev: innodb-tuning-troubleshooting,  Up: innodb-storage-engine

14.3.15 Limits on `InnoDB' Tables
---------------------------------

*Warning*:

Do _not_ convert MySQL system tables in the `mysql' database from
`MyISAM' to `InnoDB' tables! This is an unsupported operation. If you
do this, MySQL does not restart until you restore the old system tables
from a backup or re-generate them with the *Note `mysql_install_db':
mysql-install-db. script.

*Warning*:

It is not a good idea to configure `InnoDB' to use data files or log
files on NFS volumes. Otherwise, the files might be locked by other
processes and become unavailable for use by MySQL.

* Maximums and Minimums *

   * A table can contain a maximum of 1000 columns.

   * A table can contain a maximum of 64 secondary indexes.

   * By default, an index key for a single-column index can be up to
     767 bytes. The same length limit applies to any index key prefix.
     See *Note create-index::. For example, you might hit this limit
     with a column prefix index of more than 255 characters on a `TEXT'
     or `VARCHAR' column, assuming a UTF-8 character set and the
     maximum of 3 bytes for each character. When the
     `innodb_large_prefix' configuration option is enabled, this length
     limit is raised to 3072 bytes, for `InnoDB' tables that use the
     `DYNAMIC' and `COMPRESSED' row formats.

     When you attempt to specify an index prefix length longer than
     allowed, the length is silently reduced to the maximum length.
     This configuration option changes the error handling for some
     combinations of row format and prefix length longer than the
     maximum allowed. See `innodb_large_prefix' for details.

   * The `InnoDB' internal maximum key length is 3500 bytes, but MySQL
     itself restricts this to 3072 bytes.  This limit applies to the
     length of the combined index key in a multi-column index.

   * The maximum row length, except for variable-length columns (*Note
     `VARBINARY': binary-varbinary, *Note `VARCHAR': char, *Note
     `BLOB': blob. and *Note `TEXT': blob.), is slightly less than half
     of a database page. That is, the maximum row length is about 8000
     bytes. *Note `LONGBLOB': blob. and *Note `LONGTEXT': blob.
     columns must be less than 4GB, and the total row length, including
     *Note `BLOB': blob. and *Note `TEXT': blob. columns, must be less
     than 4GB.

     If a row is less than half a page long, all of it is stored
     locally within the page. If it exceeds half a page,
     variable-length columns are chosen for external off-page storage
     until the row fits within half a page, as described in *Note
     innodb-file-space::.

   * Although `InnoDB' supports row sizes larger than 65,535 bytes
     internally, MySQL itself imposes a row-size limit of 65,535 for
     the combined size of all columns:


          mysql> CREATE TABLE t (a VARCHAR(8000), b VARCHAR(10000),
              -> c VARCHAR(10000), d VARCHAR(10000), e VARCHAR(10000),
              -> f VARCHAR(10000), g VARCHAR(10000)) ENGINE=InnoDB;
          ERROR 1118 (42000): Row size too large. The maximum row size for the
          used table type, not counting BLOBs, is 65535. You have to change some
          columns to TEXT or BLOBs

     See *Note column-count-limit::.

   * On some older operating systems, files must be less than 2GB.
     This is not a limitation of `InnoDB' itself, but if you require a
     large tablespace, you will need to configure it using several
     smaller data files rather than one or a file large data files.

   * The combined size of the `InnoDB' log files must be less than 4GB.

   * The minimum tablespace size is slightly larger than 10MB. The
     maximum tablespace size is four billion database pages (64TB).
     This is also the maximum size for a table.

   * The default database page size in `InnoDB' is 16KB.

     *Note*:

     Changing the page size is not a supported operation and there is
     no guarantee that *Note `InnoDB': innodb-storage-engine. will
     function normally with a page size other than 16KB. Problems
     compiling or running InnoDB may occur. In particular,
     `ROW_FORMAT=COMPRESSED' in the Barracuda file format assumes that
     the page size is at most 16KB and uses 14-bit pointers.

     A version of *Note `InnoDB': innodb-storage-engine. built for one
     page size cannot use data files or log files from a version built
     for a different page size. This limitation could affect restore or
     downgrade operations using data from MySQL 5.6, which does support
     page sizes other than 16KB.

* Index Types *

   * `InnoDB' tables do not support `FULLTEXT' indexes.

   * `InnoDB' tables support spatial data types, but not indexes on
     them.

* Restrictions on InnoDB Tables *

   * *Note `ANALYZE TABLE': analyze-table. determines index cardinality
     (as displayed in the `Cardinality' column of *Note `SHOW INDEX':
     show-index. output) by doing eight random dives to each of the
     index trees and updating index cardinality estimates accordingly.
     Because these are only estimates, repeated runs of *Note `ANALYZE
     TABLE': analyze-table. may produce different numbers. This makes
     *Note `ANALYZE TABLE': analyze-table. fast on `InnoDB' tables but
     not 100% accurate because it does not take all rows into account.

     You can change the number of random dives by modifying the
     `innodb_stats_sample_pages' system variable. For more information,
     see *Note innodb-other-changes::.

     MySQL uses index cardinality estimates only in join optimization.
     If some join is not optimized in the right way, you can try using
     *Note `ANALYZE TABLE': analyze-table. In the few cases that *Note
     `ANALYZE TABLE': analyze-table. does not produce values good
     enough for your particular tables, you can use `FORCE INDEX' with
     your queries to force the use of a particular index, or set the
     `max_seeks_for_key' system variable to ensure that MySQL prefers
     index lookups over table scans. See *Note
     server-system-variables::, and *Note optimizer-issues::.

   * *Note `SHOW TABLE STATUS': show-table-status. does not give
     accurate statistics on `InnoDB' tables, except for the physical
     size reserved by the table. The row count is only a rough estimate
     used in SQL optimization.

   * `InnoDB' does not keep an internal count of rows in a table
     because concurrent transactions might `see' different numbers of
     rows at the same time.  To process a `SELECT COUNT(*) FROM t'
     statement, `InnoDB' scans an index of the table, which takes some
     time if the index is not entirely in the buffer pool. If your
     table does not change often, using the MySQL query cache is a good
     solution. To get a fast count, you have to use a counter table you
     create yourself and let your application update it according to
     the inserts and deletes it does. If an approximate row count is
     sufficient, *Note `SHOW TABLE STATUS': show-table-status. can be
     used.  See *Note innodb-tuning::.

   * On Windows, `InnoDB' always stores database and table names
     internally in lowercase. To move databases in a binary format from
     Unix to Windows or from Windows to Unix, create all databases and
     tables using lowercase names.

   * An `AUTO_INCREMENT' column AI_COL must be defined as part of an
     index such that it is possible to perform the equivalent of an
     indexed `SELECT MAX(AI_COL)' lookup on the table to obtain the
     maximum column value. Typically, this is achieved by making the
     column the first column of some table index.

   * While initializing a previously specified `AUTO_INCREMENT' column
     on a table, `InnoDB' sets an exclusive lock on the end of the
     index associated with the `AUTO_INCREMENT' column. While accessing
     the auto-increment counter, `InnoDB' uses a specific `AUTO-INC'
     table lock mode where the lock lasts only to the end of the
     current SQL statement, not to the end of the entire transaction.
     Other clients cannot insert into the table while the `AUTO-INC'
     table lock is held. See *Note innodb-auto-increment-handling::.

   * When you restart the MySQL server, `InnoDB' may reuse an old value
     that was generated for an `AUTO_INCREMENT' column but never stored
     (that is, a value that was generated during an old transaction
     that was rolled back).

   * When an `AUTO_INCREMENT' integer column runs out of values, a
     subsequent `INSERT' operation returns a duplicate-key error. This
     is general MySQL behavior, similar to how `MyISAM' works.

   * `DELETE FROM TBL_NAME' does not regenerate the table but instead
     deletes all rows, one by one.

   * Under some conditions, `TRUNCATE TBL_NAME' for an `InnoDB' table
     is mapped to `DELETE FROM TBL_NAME'. See *Note truncate-table::.

   * Currently, cascaded foreign key actions do not activate triggers.

   * You cannot create a table with a column name that matches the name
     of an internal InnoDB column (including `DB_ROW_ID', `DB_TRX_ID',
     `DB_ROLL_PTR', and `DB_MIX_ID'). The server reports error 1005 and
     refers to error -1 in the error message. This restriction applies
     only to use of the names in uppercase.

* Locking and Transactions *

   * *Note `LOCK TABLES': lock-tables. acquires two locks on each table
     if `innodb_table_locks=1' (the default). In addition to a table
     lock on the MySQL layer, it also acquires an `InnoDB' table lock.
     Versions of MySQL before 4.1.2 did not acquire `InnoDB' table
     locks; the old behavior can be selected by setting
     `innodb_table_locks=0'.  If no `InnoDB' table lock is acquired,
     *Note `LOCK TABLES': lock-tables. completes even if some records
     of the tables are being locked by other transactions.

     As of MySQL 5.5.3, `innodb_table_locks=0' has no effect for tables
     locked explicitly with *Note `LOCK TABLES ... WRITE': lock-tables.
     It still has an effect for tables locked for read or write by
     *Note `LOCK TABLES ... WRITE': lock-tables. implicitly (for
     example, through triggers) or by *Note `LOCK TABLES ... READ':
     lock-tables.

   * All `InnoDB' locks held by a transaction are released when the
     transaction is committed or aborted. Thus, it does not make much
     sense to invoke *Note `LOCK TABLES': lock-tables. on `InnoDB'
     tables in `autocommit=1' mode because the acquired `InnoDB' table
     locks would be released immediately.

   * You cannot lock additional tables in the middle of a transaction
     because *Note `LOCK TABLES': lock-tables.  performs an implicit
     *Note `COMMIT': commit. and *Note `UNLOCK TABLES': lock-tables.

   * The limit of 1023 concurrent data-modifying transactions has been
     raised in MySQL 5.5 and above. The limit is now 128 * 1023
     concurrent transactions that generate undo records. You can remove
     any workarounds that require changing the proper structure of your
     transactions, such as committing more frequently.


File: manual.info,  Node: innodb-5-5,  Next: myisam-storage-engine,  Prev: innodb-storage-engine,  Up: storage-engines

14.4 New Features of InnoDB 1.1
===============================

* Menu:

* innodb-introduction::          Introduction to InnoDB 1.1
* innodb-create-index::          Fast Index Creation in the InnoDB Storage Engine
* innodb-compression::           InnoDB Data Compression
* innodb-file-format::           InnoDB File-Format Management
* innodb-row-format::            How InnoDB Stores Variable-Length Columns
* innodb-information-schema::    InnoDB `INFORMATION_SCHEMA' tables
* innodb-performance::           `InnoDB' Performance and Scalability Enhancements
* innodb-other-changes::         Changes for Flexibility, Ease of Use and Reliability
* innodb-installation::          Installing the InnoDB Storage Engine
* innodb-upgrading::             Upgrading the InnoDB Storage Engine
* innodb-downgrading::           Downgrading the InnoDB Storage Engine
* innodb-changes::               InnoDB Storage Engine Change History
* innodb-contrib::               Third-Party Software
* innodb-parameter-changes::     List of Parameters Changed in InnoDB 1.1 and InnoDB Plugin 1.0


File: manual.info,  Node: innodb-introduction,  Next: innodb-create-index,  Prev: innodb-5-5,  Up: innodb-5-5

14.4.1 Introduction to InnoDB 1.1
---------------------------------

* Menu:

* innodb-introduction-features::  Features of the InnoDB Storage Engine
* innodb-introduction-obtaining::  Obtaining and Installing the InnoDB Storage Engine
* innodb-introduction-version::  Viewing the InnoDB Storage Engine Version Number
* innodb-introduction-restrictions::  Compatibility Considerations for Downgrade and Backup

InnoDB 1.1 combines the familiar reliability and performance of the
InnoDB storage engine, with new performance and usability enhancements.
InnoDB 1.1 includes all the features that were part of the InnoDB
Plugin for MySQL 5.1, plus new features specific to MySQL 5.5 and
higher.

Beginning with MySQL version 5.5, InnoDB is the default storage engine,
rather than MyISAM, to promote greater data reliability and reducing
the chance of corruption.


File: manual.info,  Node: innodb-introduction-features,  Next: innodb-introduction-obtaining,  Prev: innodb-introduction,  Up: innodb-introduction

14.4.1.1 Features of the InnoDB Storage Engine
..............................................

InnoDB in MySQL 5.5 contains several important new features:

   * *Note Fast index creation: add or drop indexes without copying the
     data: innodb-create-index.

   * *Note Data compression: shrink tables: (to significantly reduce
     storage and I/O)innodb-compression.

   * *Note New row format: fully off-page storage of long `BLOB':
     (`TEXT')innodb-row-format.

   * *Note File format management: protects upward and downward
     compatibility: innodb-file-format.

   * *Note `INFORMATION_SCHEMA' tables: information about compression
     and locking: innodb-information-schema.

   * *Note Performance and scalability enhancements:
     innodb-performance.:

        * *Note innodb-performance-latching::

        * *Note innodb-performance-use_sys_malloc::

        * *Note innodb-performance-change_buffering::

        * *Note innodb-performance-adaptive_hash_index::

        * *Note innodb-performance-thread_concurrency::

        * *Note innodb-performance-read_ahead::

        * *Note innodb-performance-multiple_io_threads::

        * *Note innodb-performance-aio-linux::

        * *Note innodb-performance-group_commit::

        * *Note innodb-performance-thread_io_rate::

        * *Note innodb-performance-adaptive_flushing::

        * *Note innodb-performance-pause_instruction::

        * *Note innodb-performance-spin_lock_polling::

        * *Note innodb-performance-midpoint_insertion::

        * *Note innodb-performance-recovery::

        * *Note innodb-performance-schema::

        * *Note innodb-multiple-buffer-pools::

        * *Note innodb-multiple-rollback-segments::

        * *Note innodb-improved-purge-scheduling::

        * *Note innodb-improved-log-sys-mutex::

        * *Note innodb-separate-flush-list-mutex::

        * *Note innodb-parameters-new-defaults::

   * *Note Other changes for flexibility: (ease of use and
     reliability)innodb-other-changes.:

        * *Note innodb-other-changes-file-formats::

        * *Note innodb-other-changes-dynamic-parameters::

        * *Note innodb-other-changes-truncate::

        * *Note innodb-other-changes-strict-mode::

        * *Note innodb-other-changes-statistics-estimation::

        * *Note innodb-other-changes-drop-index::

        * *Note innodb-other-changes-show-mutex::

        * *Note innodb-other-changes-readahead-counters::

* Upward and Downward Compatibility *

Note that the ability to use data compression and the new row format
require the use of a new InnoDB file format called Barracuda. The
previous file format, used by the built-in InnoDB in MySQL 5.1 and
earlier, is now called Antelope and does not support these features,
but does support the other features introduced with the InnoDB storage
engine.

The InnoDB storage engine is upward compatible from standard InnoDB as
built in to, and distributed with, MySQL. Existing databases can be
used with the InnoDB Storage Engine for MySQL. The new parameter
`innodb_file_format' can help protect upward and downward compatibility
between InnoDB versions and database files, allowing users to enable or
disable use of new features that can only be used with certain versions
of InnoDB.

InnoDB since version 5.0.21 has a safety feature that prevents it from
opening tables that are in an unknown format. However, the system
tablespace may contain references to new-format tables that confuse the
built-in InnoDB in MySQL 5.1 and earlier. These references are cleared
in a slow shutdown.

With previous versions of InnoDB, no error would be returned until you
try to access a table that is in a format `too new' for the software.
To provide early feedback, InnoDB 1.1 checks the system tablespace
before startup to ensure that the file format used in the database is
supported by the storage engine. See *Note
innodb-file-format-compatibility-checking:: for the details.


File: manual.info,  Node: innodb-introduction-obtaining,  Next: innodb-introduction-version,  Prev: innodb-introduction-features,  Up: innodb-introduction

14.4.1.2 Obtaining and Installing the InnoDB Storage Engine
...........................................................

Starting with MySQL 5.4.2, you do not need to do anything special to
get or install the most up-to-date InnoDB storage engine. From that
version forward, the InnoDB storage engine in the server is what was
formerly known as the InnoDB Plugin. Earlier versions of MySQL required
some extra build and configuration steps to get the Plugin-specific
features such as fast index creation and table compression.

Report any bugs in the InnoDB storage engine using the My Oracle
Support site (http://support.oracle.com). For general discussions about
InnoDB Storage Engine for MySQL, see
`http://forums.mysql.com/list.php?22'.


File: manual.info,  Node: innodb-introduction-version,  Next: innodb-introduction-restrictions,  Prev: innodb-introduction-obtaining,  Up: innodb-introduction

14.4.1.3 Viewing the InnoDB Storage Engine Version Number
.........................................................

InnoDB storage engine releases are numbered with version numbers
independent of MySQL release numbers. The initial release of the InnoDB
storage engine is version 1.0, and it is designed to work with MySQL
5.1. Version 1.1 of the InnoDB storage engine is for MySQL 5.5 and up.

   * The first component of the InnoDB storage engine version number
     designates a major release level.

   * The second component corresponds to the MySQL release. The digit 0
     corresponds to MySQL 5.1. The digit 1 corresponds to MySQL 5.5.

   * The third component indicates the specific release of the InnoDB
     storage engine (at a given major release level and for a specific
     MySQL release); only bug fixes and minor functional changes are
     introduced at this level.

Once you have installed the InnoDB storage engine, you can check its
version number in three ways:

   * In the error log, it is printed during startup.

   * SELECT * FROM information_schema.plugins;

   * SELECT @@innodb_version;

The InnoDB storage engine writes its version number to the error log,
which can be helpful in diagnosis of errors:

     091105 12:28:06 InnoDB Plugin 1.0.5 started; log sequence number 46509

Note that the `PLUGIN_VERSION' column in the table
`INFORMATION_SCHEMA.PLUGINS' does not display the third component of
the version number, only the first and second components, as in 1.0.


File: manual.info,  Node: innodb-introduction-restrictions,  Prev: innodb-introduction-version,  Up: innodb-introduction

14.4.1.4 Compatibility Considerations for Downgrade and Backup
..............................................................

_ Because InnoDB 1.1 supports the `Barracuda' file format, with new
on-disk data structures within both the database and log files, pay
special attention to file format compatibility with respect to the
following scenarios: _

   * Downgrading from MySQL 5.5 to the MySQL 5.1 or earlier (without
     the InnoDB Plugin enabled), or otherwise using earlier versions of
     MySQL with database files created by MySQL 5.5 and higher.

   * Using `mysqldump'.

   * Using MySQL replication.

   * Using MySQL Enterprise Backup or InnoDB Hot Backup.

_WARNING:_ Once you create any tables with the Barracuda file format,
take care to avoid crashes and corruptions when using those files with
an earlier version of MySQL. It is _strongly_ recommended that you use
a `slow shutdown' (`SET GLOBAL innodb_fast_shutdown=0') when stopping
the MySQL server before downgrading to MySQL 5.1 or earlier. This
ensures that the log files and other system information do not cause
consistency issues or startup problems when using a prior version of
MySQL.

_WARNING:_ If you dump a database containing compressed tables with
`mysqldump', the dump file may contain *Note `CREATE TABLE':
create-table. statements that attempt to create compressed tables, or
those using `ROW_FORMAT=DYNAMIC' in the new database. Therefore, be
sure the new database is running the InnoDB storage engine, with the
proper settings for `innodb_file_format' and `innodb_file_per_table',
if you want to have the tables re-created as they exist in the original
database. Typically, when the `mysqldump' file is loaded, MySQL and
InnoDB ignore *Note `CREATE TABLE': create-table. options they do not
recognize, and the table(s) are created in a format used by the running
server.

_WARNING:_ If you use MySQL replication, ensure all slaves are
configured with the InnoDB storage engine, with the same settings for
`innodb_file_format' and `innodb_file_per_table'. If you do not do so,
and you create tables that require the new Barracuda file format,
replication errors may occur. If a slave MySQL server is running an
older version of MySQL, it ignores the *Note `CREATE TABLE':
create-table. options to create a compressed table or one with
`ROW_FORMAT=DYNAMIC', and creates the table uncompressed, with
`ROW_FORMAT=COMPACT'.

_WARNING:_ Version 3.0 of InnoDB Hot Backup does not support the new
Barracuda file format. Using InnoDB Hot Backup Version 3 to backup
databases in this format causes unpredictable behavior. MySQL
Enterprise Backup, the successor product to InnoDB Hot Backup, does
support tables with the Barracuda file format.  You can also back up
such databases with `mysqldump'.


File: manual.info,  Node: innodb-create-index,  Next: innodb-compression,  Prev: innodb-introduction,  Up: innodb-5-5

14.4.2 Fast Index Creation in the InnoDB Storage Engine
-------------------------------------------------------

* Menu:

* innodb-create-index-overview::  Overview of Fast Index Creation
* innodb-create-index-examples::  Examples of Fast Index Creation
* innodb-create-index-implementation::  Implementation Details of Fast Index Creation
* innodb-create-index-concurrency::  Concurrency Considerations for Fast Index Creation
* innodb-create-index-recovery::  How Crash Recovery Works with Fast Index Creation
* innodb-create-index-limitations::  Limitations of Fast Index Creation

In MySQL 5.5 and higher, or in MySQL 5.1 with the InnoDB Plugin,
creating and dropping secondary indexes does not copy the contents of
the entire table, making this operation much more efficient than with
prior releases.


File: manual.info,  Node: innodb-create-index-overview,  Next: innodb-create-index-examples,  Prev: innodb-create-index,  Up: innodb-create-index

14.4.2.1 Overview of Fast Index Creation
........................................

With MySQL 5.5 and higher, or MySQL 5.1 with the InnoDB Plugin,
creating and dropping secondary indexes for InnoDB tables is much
faster than before. Historically, adding or dropping an index on a
table with existing data could be very slow. The *Note `CREATE INDEX':
create-index. and *Note `DROP INDEX': drop-index. statements worked by
creating a new, empty table defined with the requested set of indexes,
then copying the existing rows to the new table one-by-one, updating
the indexes as the rows are inserted. After all rows from the original
table were copied, the old table was dropped and the copy was renamed
with the name of the original table.

The performance speedup for fast index creation applies to secondary
indexes, not to the primary key index. The rows of an InnoDB table are
stored in a clustered index organized based on the primary key, forming
what some database systems call an `index-organized table'. Because the
table structure is so closely tied to the primary key, redefining the
primary key still requires copying the data.

This new mechanism also means that you can generally speed the overall
process of creating and loading an indexed table by creating the table
with only the clustered index, and adding the secondary indexes after
the data is loaded.

Although no syntax changes are required in the *Note `CREATE INDEX':
create-index. or *Note `DROP INDEX': drop-index. commands, some factors
affect the performance, space usage, and semantics of this operation
(see *Note innodb-create-index-limitations::).


File: manual.info,  Node: innodb-create-index-examples,  Next: innodb-create-index-implementation,  Prev: innodb-create-index-overview,  Up: innodb-create-index

14.4.2.2 Examples of Fast Index Creation
........................................

It is possible to create multiple indexes on a table with one *Note
`ALTER TABLE': alter-table. statement. This is relatively efficient,
because the clustered index of the table needs to be scanned only once
(although the data is sorted separately for each new index). For
example:

     CREATE TABLE T1(A INT PRIMARY KEY, B INT, C CHAR(1)) ENGINE=InnoDB;
     INSERT INTO T1 VALUES (1,2,'a'), (2,3,'b'), (3,2,'c'), (4,3,'d'), (5,2,'e');
     COMMIT;
     ALTER TABLE T1 ADD INDEX (B), ADD UNIQUE INDEX (C);

The above statements create table `T1' with the clustered index
(primary key) on column `A', insert several rows, and then build two
new indexes on columns `B' and `C'. If there were many rows inserted
into `T1' before the *Note `ALTER TABLE': alter-table. statement, this
approach is much more efficient than creating all the secondary indexes
before loading the data.

You can also create the indexes one at a time, but then the clustered
index of the table is scanned (as well as sorted) once for each *Note
`CREATE INDEX': create-index. statement.  Thus, the following
statements are not as efficient as the *Note `ALTER TABLE':
alter-table. statement above, even though neither requires recreating
the clustered index for table `T1'.

     CREATE INDEX B ON T1 (B);
     CREATE UNIQUE INDEX C ON T1 (C);

Dropping InnoDB secondary indexes also does not require any copying of
table data. You can equally quickly drop multiple indexes with a single
*Note `ALTER TABLE': alter-table.  statement or multiple *Note `DROP
INDEX': drop-index.  statements:

     ALTER TABLE T1 DROP INDEX B, DROP INDEX C;

or:

     DROP INDEX B ON T1;
     DROP INDEX C ON T1;

Restructuring the clustered index in InnoDB always requires copying the
data in the table. For example, if you create a table without a primary
key, InnoDB chooses one for you, which may be the first `UNIQUE' key
defined on `NOT NULL' columns, or a system-generated key. Defining a
`PRIMARY KEY' later causes the data to be copied, as in the following
example:

     CREATE TABLE T2 (A INT, B INT) ENGINE=InnoDB;
     INSERT INTO T2 VALUES (NULL, 1);
     ALTER TABLE T2 ADD PRIMARY KEY (B);

When you create a `UNIQUE' or `PRIMARY KEY' index, InnoDB must do some
extra work. For `UNIQUE' indexes, InnoDB checks that the table contains
no duplicate values for the key. For a `PRIMARY KEY' index, InnoDB also
checks that none of the `PRIMARY KEY' columns contains a `NULL'. It is
best to define the primary key when you create a table, so you need not
rebuild the table later.


File: manual.info,  Node: innodb-create-index-implementation,  Next: innodb-create-index-concurrency,  Prev: innodb-create-index-examples,  Up: innodb-create-index

14.4.2.3 Implementation Details of Fast Index Creation
......................................................

InnoDB has two types of indexes: the clustered index and secondary
indexes. Since the clustered index contains the data values in its
B-tree nodes, adding or dropping a clustered index does involve copying
the data, and creating a new copy of the table. A secondary index,
however, contains only the index key and the value of the primary key.
This type of index can be created or dropped without copying the data
in the clustered index. Because each secondary index contains copies of
the primary key values (used to access the clustered index when
needed), when you change the definition of the primary key, all
secondary indexes are recreated as well.

Dropping a secondary index is simple. Only the internal InnoDB system
tables and the MySQL data dictionary tables are updated to reflect the
fact that the index no longer exists. InnoDB returns the storage used
for the index to the tablespace that contained it, so that new indexes
or additional table rows can use the space.

To add a secondary index to an existing table, InnoDB scans the table,
and sorts the rows using memory buffers and temporary files in order by
the values of the secondary index key columns. The B-tree is then built
in key-value order, which is more efficient than inserting rows into an
index in random order. Because the B-tree nodes are split when they
fill, building the index in this way results in a higher fill-factor
for the index, making it more efficient for subsequent access.


File: manual.info,  Node: innodb-create-index-concurrency,  Next: innodb-create-index-recovery,  Prev: innodb-create-index-implementation,  Up: innodb-create-index

14.4.2.4 Concurrency Considerations for Fast Index Creation
...........................................................

While an InnoDB secondary index is being created or dropped, the table
is locked in shared mode. Any writes to the table are blocked, but the
data in the table can be read. When you alter the clustered index of a
table, the table is locked in exclusive mode, because the data must be
copied. Thus, during the creation of a new clustered index, all
operations on the table are blocked.

A *Note `CREATE INDEX': create-index. or *Note `ALTER TABLE':
alter-table. statement for an InnoDB table always waits for currently
executing transactions that are accessing the table to commit or roll
back.  *Note `ALTER TABLE': alter-table. statements that redefine an
InnoDB primary key wait for all `SELECT' statements that access the
table to complete, or their containing transactions to commit. No
transactions whose execution spans the creation of the index can be
accessing the table, because the original table is dropped when the
clustered index is restructured.

Once a *Note `CREATE INDEX': create-index. or *Note `ALTER TABLE':
alter-table. statement that creates an InnoDB secondary index begins
executing, queries can access the table for read access, but cannot
update the table. If an *Note `ALTER TABLE': alter-table. statement is
changing the clustered index for an InnoDB table, all queries wait until
the operation completes.

A newly-created InnoDB secondary index contains only the committed data
in the table at the time the *Note `CREATE INDEX': create-index. or
*Note `ALTER TABLE': alter-table.  statement begins to execute. It does
not contain any uncommitted values, old versions of values, or values
marked for deletion but not yet removed from the old index.

Because a newly-created index contains only information about data
current at the time the index was created, queries that need to see
data that was deleted or changed before the index was created cannot
use the index. The only queries that could be affected by this
limitation are those executing in transactions that began before the
creation of the index was begun. For such queries, unpredictable
results could occur. Newer queries can use the index.


File: manual.info,  Node: innodb-create-index-recovery,  Next: innodb-create-index-limitations,  Prev: innodb-create-index-concurrency,  Up: innodb-create-index

14.4.2.5 How Crash Recovery Works with Fast Index Creation
..........................................................

Although no data is lost if the server crashes while an *Note `ALTER
TABLE': alter-table. statement is executing, the crash recovery process
is different for clustered indexes and secondary indexes.

If the server crashes while creating an InnoDB secondary index, upon
recovery, MySQL drops any partially created indexes. You must re-run
the *Note `ALTER TABLE': alter-table. or *Note `CREATE INDEX':
create-index. statement.

When a crash occurs during the creation of an InnoDB clustered index,
recovery is more complicated, because the data in the table must be
copied to an entirely new clustered index. Remember that all InnoDB
tables are stored as clustered indexes. In the following discussion, we
use the word table and clustered index interchangeably.

MySQL creates the new clustered index by copying the existing data from
the original InnoDB table to a temporary table that has the desired
index structure. Once the data is completely copied to this temporary
table, the original table is renamed with a different temporary table
name. The temporary table comprising the new clustered index is renamed
with the name of the original table, and the original table is dropped
from the database.

If a system crash occurs while creating a new clustered index, no data
is lost, but you must complete the recovery process using the temporary
tables that exist during the process. Since it is rare to re-create a
clustered index or re-define primary keys on large tables, or to
encounter a system crash during this operation, this manual does not
provide information on recovering from this scenario. Contact MySQL
support.


File: manual.info,  Node: innodb-create-index-limitations,  Prev: innodb-create-index-recovery,  Up: innodb-create-index

14.4.2.6 Limitations of Fast Index Creation
...........................................

Take the following considerations into account when creating or
dropping InnoDB indexes:

   * During index creation, files are written to the temporary
     directory (`$TMPDIR' on Unix, `%TEMP%' on Windows, or the value of
     the `--tmpdir' configuration variable). Each temporary file is
     large enough to hold one column that makes up the new index, and
     each one is removed as soon as it is merged into the final index.

   * An *Note `ALTER TABLE': alter-table. statement that contains `DROP
     INDEX' and `ADD INDEX' clauses that both name the same index uses a
     table copy, not Fast Index Creation.

   * The table is copied, rather than using Fast Index Creation when
     you create an index on a `TEMPORARY TABLE'. This has been reported
     as MySQL Bug #39833.

   * To avoid consistency issues between the InnoDB data dictionary and
     the MySQL data dictionary, the table is copied, rather than using
     Fast Index Creation when you use the `ALTER TABLE ... RENAME
     COLUMN' syntax.

   * The statement `ALTER IGNORE TABLE T ADD UNIQUE INDEX' does not
     delete duplicate rows. This has been reported as MySQL Bug #40344.
     The `IGNORE' keyword is ignored. If any duplicate rows exist, the
     operation fails with the following error message:

          ERROR 23000: Duplicate entry '347' for key 'PL'

   * As noted above, a newly-created index contains only information
     about data current at the time the index was created. Therefore,
     you should not run queries in a transaction that might use a
     secondary index that did not exist at the beginning of the
     transaction. There is no way for InnoDB to access `old' data that
     is consistent with the rest of the data read by the transaction.
     See the discussion of locking in *Note
     innodb-create-index-concurrency::.

     Prior to InnoDB storage engine 1.0.4, unexpected results could
     occur if a query attempts to use an index created after the start
     of the transaction containing the query. If an old transaction
     attempts to access a `too new' index, InnoDB storage engine 1.0.4
     and later reports an error:

          ERROR HY000: Table definition has changed, please retry transaction

     As the error message suggests, committing (or rolling back) the
     transaction, and restarting it, cures the problem.

   * InnoDB storage engine 1.0.2 introduces some improvements in error
     handling when users attempt to drop indexes. See section *Note
     innodb-other-changes-drop-index:: for details.

   * MySQL 5.5 does not support efficient creation or dropping of
     `FOREIGN KEY' constraints. Therefore, if you use *Note `ALTER
     TABLE': alter-table. to add or remove a `REFERENCES' constraint,
     the child table is copied, rather than using Fast Index Creation.

   * *Note `OPTIMIZE TABLE': optimize-table. for an `InnoDB' table is
     mapped to an *Note `ALTER TABLE': alter-table. operation to
     rebuild the table and update index statistics and free unused
     space in the clustered index. This operation does not use fast
     index creation. Secondary indexes are not created as efficiently
     because keys are inserted in the order they appeared in the
     primary key.


File: manual.info,  Node: innodb-compression,  Next: innodb-file-format,  Prev: innodb-create-index,  Up: innodb-5-5

14.4.3 InnoDB Data Compression
------------------------------

* Menu:

* innodb-compression-background::  Overview of Table Compression
* innodb-compression-usage::     Enabling Compression for a Table
* innodb-compression-tuning::    Tuning InnoDB Compression
* innodb-compression-internals::  How Compression Works in InnoDB

By setting InnoDB configuration options, you can create tables where
the data is stored in compressed form. The compression means less data
is transferred between disk and memory, and takes up less space in
memory. The benefits are amplified for tables with secondary indexes,
because index data is compressed also. Compression can be especially
important for SSD storage devices, because they tend to have lower
capacity than HDD devices.


File: manual.info,  Node: innodb-compression-background,  Next: innodb-compression-usage,  Prev: innodb-compression,  Up: innodb-compression

14.4.3.1 Overview of Table Compression
......................................

Because processors and cache memories have increased in speed more than
disk storage devices, many workloads are I/O-bound. Data compression
enables smaller database size, reduced I/O, and improved throughput, at
the small cost of increased CPU utilization. Compression is especially
valuable for read-intensive applications, on systems with enough RAM to
keep frequently-used data in memory.

An InnoDB table created with `ROW_FORMAT=COMPRESSED' can use a smaller
page size on disk than the usual 16KB default. Smaller pages require
less I/O to read from and write to disk, which is especially valuable
for SSD devices.

The page size is specified through the `KEY_BLOCK_SIZE' parameter. The
different page size means the table must be in its own `.ibd' file
rather than the system tablespace, which requires enabling the
`innodb_file_per_table' option. The level of compression is the same
regardless of the `KEY_BLOCK_SIZE' value. As you specify smaller values
for `KEY_BLOCK_SIZE', you get the I/O benefits of increasingly smaller
pages. But if you specify a value that is too small, there is
additional overhead to reorganize the pages when data values cannot be
compressed enough to fit multiple rows in each page. There is a hard
limit on how small `KEY_BLOCK_SIZE' can be for a table, based on the
lengths of the key columns for each of its indexes. Specify a value
that is too small, and the *Note `CREATE TABLE': create-table. or *Note
`ALTER TABLE': alter-table.  statement fails.

In the buffer pool, the compressed data is held in small pages, with a
page size based on the `KEY_BLOCK_SIZE' value. For extracting or
updating the column values, InnoDB also creates a 16KB page in the
buffer pool with the uncompressed data.  Within the buffer pool, any
updates to the uncompressed page are also re-written back to the
equivalent compressed page. You might need to size your buffer pool to
accommodate the additional data of both compressed and uncompressed
pages, although the uncompressed pages are evicted from the buffer pool
when space is needed, and then uncompressed again on the next access.


File: manual.info,  Node: innodb-compression-usage,  Next: innodb-compression-tuning,  Prev: innodb-compression-background,  Up: innodb-compression

14.4.3.2 Enabling Compression for a Table
.........................................

* Menu:

* innodb-compression-enabling::  Configuration Parameters for Compression
* innodb-compression-syntax-warnings::  SQL Compression Syntax Warnings and Errors

The default uncompressed size of InnoDB data pages is 16KB. You can use
the attributes `ROW_FORMAT=COMPRESSED', `KEY_BLOCK_SIZE', or both in the
*Note `CREATE TABLE': create-table. and *Note `ALTER TABLE':
alter-table. statements to enable table compression. Depending on the
combination of option values, InnoDB uses a page size of 1KB, 2KB, 4KB,
8KB, or 16KB for the `.ibd' file of the table. (The actual compression
algorithm is not affected by the `KEY_BLOCK_SIZE' value.)

*Note*:

Compression is applicable to tables, not to individual rows, despite
the option name `ROW_FORMAT'.

To create a compressed table, you might use a statement like this:

     CREATE TABLE NAME
      (column1 INT PRIMARY KEY)
      ENGINE=InnoDB
      ROW_FORMAT=COMPRESSED
      KEY_BLOCK_SIZE=4;

If you specify `ROW_FORMAT=COMPRESSED' but not `KEY_BLOCK_SIZE', the
default compressed page size of 8KB is used. If `KEY_BLOCK_SIZE' is
specified, you can omit the attribute `ROW_FORMAT=COMPRESSED'.

Setting `KEY_BLOCK_SIZE=16' typically does not result in much
compression, since the normal InnoDB page size is 16KB. This setting
may still be useful for tables with many long `BLOB', `VARCHAR' or
`TEXT' columns, because such values often do compress well, and might
therefore require fewer `overflow' pages as described in *Note
innodb-compression-internals::.

All indexes of a table (including the clustered index) are compressed
using the same page size, as specified in the *Note `CREATE TABLE':
create-table. or *Note `ALTER TABLE': alter-table. statement. Table
attributes such as `ROW_FORMAT' and `KEY_BLOCK_SIZE' are not part of the
*Note `CREATE INDEX': create-index. syntax, and are ignored if they are
specified (although you see them in the output of the `SHOW CREATE
TABLE' statement).


File: manual.info,  Node: innodb-compression-enabling,  Next: innodb-compression-syntax-warnings,  Prev: innodb-compression-usage,  Up: innodb-compression-usage

14.4.3.3 Configuration Parameters for Compression
.................................................

Compressed tables are stored in a format that previous versions of
InnoDB cannot process. To preserve downward compatibility of database
files, compression can be specified only when the Barracuda data file
format is enabled using the configuration parameter
`innodb_file_format'.

Table compression is also not available for the InnoDB system
tablespace. The system tablespace (space 0, the `ibdata*' files) may
contain user data, but it also contains internal InnoDB system
information, and therefore is never compressed. Thus, compression
applies only to tables (and indexes) stored in their own tablespaces.

To use compression, enable the file-per-table mode using the
configuration parameter `innodb_file_per_table' and enable the
Barracuda disk file format using the parameter `innodb_file_format'. If
necessary, you can set these parameters in the MySQL option file
`my.cnf' or `my.ini', or with the `SET' statement without shutting down
the MySQL server.

Specifying `ROW_FORMAT=COMPRESSED' or `KEY_BLOCK_SIZE' in *Note `CREATE
TABLE': create-table. or *Note `ALTER TABLE': alter-table.  statements
produces these warnings if the Barracuda file format is not enabled.
You can view them with the `SHOW WARNINGS' statement.

Warning level, error code, and message text for messages that could be
generated when using features requiring the Barracuda file format.

Level                                       Code                          Message
Warning                                     1478                          `InnoDB: KEY_BLOCK_SIZE requires
                                                                          innodb_file_per_table.'
Warning                                     1478                          `InnoDB: KEY_BLOCK_SIZE requires
                                                                          innodb_file_format=1'
Warning                                     1478                          `InnoDB: ignoring
                                                                          KEY_BLOCK_SIZE=4.'
Warning                                     1478                          `InnoDB: ROW_FORMAT=COMPRESSED
                                                                          requires innodb_file_per_table.'
Warning                                     1478                          `InnoDB: assuming
                                                                          ROW_FORMAT=COMPACT.'

*Note*:

These messages are only warnings, not errors, and the table is created
as if the options were not specified. When InnoDB `strict mode' (see
*Note innodb-other-changes-strict-mode::) is enabled, InnoDB generates
an error, not a warning, for these cases. In strict mode, the table is
not created if the current configuration does not permit using
compressed tables.

The `non-strict' behavior is intended to permit you to import a
`mysqldump' file into a database that does not support compressed
tables, even if the source database contained compressed tables. In
that case, MySQL creates the table in `ROW_FORMAT=COMPACT' instead of
preventing the operation.

When you import the dump file into a new database, if you want to have
the tables re-created as they exist in the original database, ensure
the server is running the InnoDB storage engine with the proper
settings for the configuration parameters `innodb_file_format' and
`innodb_file_per_table',


File: manual.info,  Node: innodb-compression-syntax-warnings,  Prev: innodb-compression-enabling,  Up: innodb-compression-usage

14.4.3.4 SQL Compression Syntax Warnings and Errors
...................................................

The attribute `KEY_BLOCK_SIZE' is permitted only when `ROW_FORMAT' is
specified as `COMPRESSED' or is omitted. Specifying a `KEY_BLOCK_SIZE'
with any other `ROW_FORMAT' generates a warning that you can view with
`SHOW WARNINGS'. However, the table is non-compressed; the specified
`KEY_BLOCK_SIZE' is ignored).

Warning level, error code, and message text for messages that could be
generated when using conflicting clauses for InnoDB table compression.

Level                                       Code                          Message
Warning                                     1478                          ` InnoDB: ignoring KEY_BLOCK_SIZE=N
                                                                          unless ROW_FORMAT=COMPRESSED. '

If you are running in InnoDB strict mode, the combination of a
`KEY_BLOCK_SIZE' with any `ROW_FORMAT' other than `COMPRESSED'
generates an error, not a warning, and the table is not created.

*Note innodb-compression-create-and-alter-options-table:: summarizes
how the various options on *Note `CREATE TABLE': create-table. and
*Note `ALTER TABLE': alter-table. are handled.

*Meaning of `CREATE TABLE' and `ALTER TABLE' options*

Option         Usage                            Description
`ROW_FORMAT=​REDUNDANT'Storage format used prior to     Less efficient than `ROW_FORMAT=COMPACT'; for backward
               MySQL 5.0.3                      compatibility
`ROW_FORMAT=​COMPACT'Default storage format since     Stores a prefix of 768 bytes of long column values in
               MySQL 5.0.3                      the clustered index page, with the remaining bytes
                                                stored in an overflow page
`ROW_FORMAT=​DYNAMIC'Available only with              Store values within the clustered index page if they
               `innodb_file​_format=Barracuda'fit; if not, stores only a 20-byte pointer to an
                                                overflow page (no prefix)
`ROW_FORMAT=​COMPRESSED'Available only with              Compresses the table and indexes using zlib to
               `innodb_file​_format=Barracuda'default compressed page size of 8K bytes; implies
                                                `ROW_FORMAT=DYNAMIC'
`KEY_BLOCK_​SIZE=N'Available only with              Specifies compressed page size of 1, 2, 4, 8 or 16
               `innodb_file​_format=Barracuda'kilobytes; implies `ROW_FORMAT=DYNAMIC' and
                                                `ROW_FORMAT=COMPRESSED'

*Note innodb-compression-create-and-alter-errors-table:: summarizes
error conditions that occur with certain combinations of configuration
parameters and options on the *Note `CREATE TABLE': create-table. or
*Note `ALTER TABLE': alter-table. statements, and how the options
appear in the output of `SHOW TABLE STATUS'.

When InnoDB strict mode is `OFF', InnoDB creates or alters the table,
but may ignore certain settings, as shown below. You can see the
warning messages in the MySQL error log. When InnoDB strict mode is
`ON', these specified combinations of options generate errors, and the
table is not created or altered. You can see the full description of
the error condition with `SHOW ERRORS'. For example:

     mysql> CREATE TABLE x (id INT PRIMARY KEY, c INT)

     -> ENGINE=INNODB KEY_BLOCK_SIZE=33333;

     ERROR 1005 (HY000): Can't create table 'test.x' (errno: 1478)

     mysql> SHOW ERRORS;
     +-------+------+-------------------------------------------+
     | Level | Code | Message                                   |
     +-------+------+-------------------------------------------+
     | Error | 1478 | InnoDB: invalid KEY_BLOCK_SIZE=33333.     |
     | Error | 1005 | Can't create table 'test.x' (errno: 1478) |
     +-------+------+-------------------------------------------+
     2 rows in set (0.00 sec)

*`CREATE/ALTER TABLE' Warnings and Errors when InnoDB Strict Mode is
OFF*

Syntax         Warning or Error        Resulting
               Condition               `ROW_FORMAT',
                                       as shown in
                                       `SHOW TABLE
                                       STATUS'
`ROW_FORMAT=REDUNDANT'None                    `REDUNDANT'
`ROW_FORMAT=COMPACT'None                    `COMPACT'
`ROW_FORMAT=COMPRESSED'Ignored unless both     `COMPACT'
or             `innodb_file_format'`=Barracuda'
`ROW_FORMAT=DYNAMIC'and                     
or             `innodb_file_per_table' 
`KEY_BLOCK_SIZE'are enabled             
is specified                           
Invalid        `KEY_BLOCK_SIZE' is     the requested
`KEY_BLOCK_SIZE'ignored                 one, or
is specified                           `COMPACT' by
(not 1, 2, 4,                          default
8 or 16)                               
`ROW_FORMAT=COMPRESSED'None; `KEY_BLOCK_SIZE'  `COMPRESSED'
and valid      specified is used, not  
`KEY_BLOCK_SIZE'the 8K default          
are specified                          
`KEY_BLOCK_SIZE'`KEY_BLOCK_SIZE' is     `REDUNDANT',
is specified   ignored                 `COMPACT' or
with                                   `DYNAMIC'
`REDUNDANT',                           
`COMPACT' or                           
`DYNAMIC' row                          
format                                 
`ROW_FORMAT'   Ignored if recognized   `COMPACT' or N/A
is not one of  by the MySQL parser.    
`REDUNDANT',   Otherwise, an error is  
`COMPACT',     issued.                 
`DYNAMIC' or                           
`COMPRESSED'                           

When InnoDB strict mode is ON (`innodb_strict_mode=1'), the InnoDB
storage engine rejects invalid `ROW_FORMAT' or `KEY_BLOCK_SIZE'
parameters. For compatibility with earlier versions of InnoDB, strict
mode is not enabled by default; instead, InnoDB issues warnings (not
errors) for ignored invalid parameters.

Note that it is not possible to see the chosen `KEY_BLOCK_SIZE' using
`SHOW TABLE STATUS'. The statement `SHOW CREATE TABLE' displays the
`KEY_BLOCK_SIZE' (even if it was ignored by InnoDB). The real
compressed page size inside InnoDB cannot be displayed by MySQL.


File: manual.info,  Node: innodb-compression-tuning,  Next: innodb-compression-internals,  Prev: innodb-compression-usage,  Up: innodb-compression

14.4.3.5 Tuning InnoDB Compression
..................................

Most often, the internal optimizations in InnoDB described in *Note
innodb-compression-internals-storage:: ensure that the system runs well
with compressed data. However, because the efficiency of compression
depends on the nature of your data, there are some factors you should
consider to get best performance. You need to choose which tables to
compress, and what compressed page size to use. You might also adjust
the size of the buffer pool based on run-time performance
characteristics, such as the amount of time the system spends
compressing and uncompressing data.

* When to Use Compression *

In general, compression works best on tables that include a reasonable
number of character string columns and where the data is read far more
often than it is written. Because there are no guaranteed ways to
predict whether or not compression benefits a particular situation,
always test with a specific workload and data set running on a
representative configuration. Consider the following factors when
deciding which tables to compress.

* Data Characteristics and Compression *

A key determinant of the efficiency of compression in reducing the size
of data files is the nature of the data itself. Recall that compression
works by identifying repeated strings of bytes in a block of data.
Completely randomized data is the worst case.  Typical data often has
repeated values, and so compresses effectively. Character strings often
compress well, whether defined in `CHAR', `VARCHAR', `TEXT' or `BLOB'
columns. On the other hand, tables containing mostly binary data
(integers or floating point numbers) or data that is previously
compressed (for example JPEG or PNG images) may not generally compress
well, significantly or at all.

You choose whether to turn on compression for each InnoDB tables.  A
table and all of its indexes use the same (compressed) page size. It
might be that the primary key (clustered) index, which contains the
data for all columns of a table, compresses more effectively than the
secondary indexes. For those cases where there are long rows, the use
of compression might result in long column values being stored
`off-page', as discussed in *Note innodb-row-format-dynamic::. Those
overflow pages may compress well. Given these considerations, for many
applications, some tables compress more effectively than others, and
you might find that your workload performs best only with a subset of
tables compressed.

Experimenting is the only way to determine whether or not to compress a
particular table. InnoDB compresses data in 16K chunks corresponding to
the uncompressed page size, and in addition to user data, the page
format includes some internal system data that is not compressed.
Compression utilities compress an entire stream of data, and so may
find more repeated strings across the entire input stream than InnoDB
would find in a table compressed in 16K chunks. But you can get a sense
of how compression efficiency by using a utility that implements LZ77
compression (such as `gzip' or WinZip) on your data file.

Another way to test compression on a specific table is to copy some
data from your uncompressed table to a similar, compressed table
(having all the same indexes) and look at the size of the resulting
file. When you do so (if nothing else using compression is running),
you can examine the ratio of successful compression operations to
overall compression operations. (In the `INNODB_CMP' table, compare
`COMPRESS_OPS' to `COMPRESS_OPS_OK'. See *Note `INNODB_CMP':
innodb-information-schema-innodb_cmp.  for more information.) If a high
percentage of compression operations complete successfully, the table
might be a good candidate for compression.

* Compression and Application and Schema Design *

Decide whether to compress data in your application or in the InnoDB
table. It is usually not sensible to store data that is compressed by
an application in an InnoDB compressed table.  Further compression is
extremely unlikely, and the attempt to compress just wastes CPU cycles.

* Compressing in the Database *

The InnoDB table compression is automatic and applies to all columns
and index values. The columns can still be tested with operators such
as `LIKE', and sort operations can still use indexes even when the
index values are compressed.  Because indexes are often a significant
fraction of the total size of a database, compression could result in
significant savings in storage, I/O or processor time. The compression
and decompression operations happen on the database server, which
likely is a powerful system that is sized to handle the expected load.

* Compressing in the Application *

If you compress data such as text in your application, before it is
inserted into the database, You might save overhead for data that does
not compress well by compressing some columns and not others. This
approach uses CPU cycles for compression and uncompression on the
client machine rather than the database server, which might be
appropriate for a distributed application with many clients, or where
the client machine has spare CPU cycles.

* Hybrid Approach *

Of course, it is possible to combine these approaches. For some
applications, it may be appropriate to use some compressed tables and
some uncompressed tables. It may be best to externally compress some
data (and store it in uncompressed InnoDB tables) and allow InnoDB to
compress (some of) the other tables in the application. As always,
up-front design and real-life testing are valuable in reaching the
right decision.

* Workload Characteristics and Compression *

In addition to choosing which tables to compress (and the page size),
the workload is another key determinant of performance. If the
application is dominated by reads, rather than updates, fewer pages
need to be reorganized and recompressed after the index page runs out
of room for the per-page `modification log' that InnoDB maintains for
compressed data. If the updates predominantly change non-indexed
columns or those containing `BLOB's or large strings that happen to be
stored `off-page', the overhead of compression may be acceptable. If
the only changes to a table are `INSERT's that use a monotonically
increasing primary key, and there are few secondary indexes, there is
little need to reorganize and recompress index pages. Since InnoDB can
`delete-mark' and delete rows on compressed pages `in place' by
modifying uncompressed data, `DELETE' operations on a table are
relatively efficient.

For some environments, the time it takes to load data can be as
important as run-time retrieval. Especially in data warehouse
environments, many tables may be read-only or read-mostly. In those
cases, it might or might not be acceptable to pay the price of
compression in terms of increased load time, unless the resulting
savings in fewer disk reads or in storage cost is significant.

Fundamentally, compression works best when the CPU time is available
for compressing and uncompressing data. Thus, if your workload is I/O
bound, rather than CPU-bound, you might find that compression can
improve overall performance. When you test your application performance
with different compression configurations, test on a platform similar
to the planned configuration of the production system.

* Configuration Characteristics and Compression *

Reading and writing database pages from and to disk is the slowest
aspect of system performance. Compression attempts to reduce I/O by
using CPU time to compress and uncompress data, and is most effective
when I/O is a relatively scarce resource compared to processor cycles.

This is often especially the case when running in a multi-user
environment with fast, multi-core CPUs. When a page of a compressed
table is in memory, InnoDB often uses an additional 16K in the buffer
pool for an uncompressed copy of the page. The adaptive LRU algorithm
in the InnoDB storage engine attempts to balance the use of memory
between compressed and uncompressed pages to take into account whether
the workload is running in an I/O-bound or CPU-bound manner. Still, a
configuration with more memory dedicated to the InnoDB buffer pool
tends to run better when using compressed tables than a configuration
where memory is highly constrained.

* Choosing the Compressed Page Size *

The optimal setting of the compressed page size depends on the type and
distribution of data that the table and its indexes contain. The
compressed page size should always be bigger than the maximum record
size, or operations may fail as noted in *Note
innodb-compression-internals-storage-btree::.

Setting the compressed page size too large wastes some space, but the
pages do not have to be compressed as often. If the compressed page
size is set too small, inserts or updates may require time-consuming
recompression, and the B-tree nodes may have to be split more
frequently, leading to bigger data files and less efficient indexing.

Typically, you set the compressed page size to 8K or 4K bytes.  Given
that the maximum InnoDB record size is around 8K, `KEY_BLOCK_SIZE=8' is
usually a safe choice.

* Monitoring Compression at Runtime *

Overall application performance, CPU and I/O utilization and the size
of disk files are good indicators of how effective compression is for
your application.

To dig deeper into performance considerations for compressed tables,
you can monitor compression performance at runtime. using the
Information Schema tables described in *Note
innodb-information-schema-examples-compression::.  These tables reflect
the internal use of memory and the rates of compression used overall.

The `INNODB_CMP' tables report information about compression activity
for each compressed page size (`KEY_BLOCK_SIZE') in use. The
information in these tables is system-wide, and includes summary data
across all compressed tables in your database. You can use this data to
help decide whether or not to compress a table by examining these
tables when no other compressed tables are being accessed.

The key statistics to consider are the number of, and amount of time
spent performing, compression and uncompression operations.  Since
InnoDB must split B-tree nodes when they are too full to contain the
compressed data following a modification, compare the number of
`successful' compression operations with the number of such operations
overall. Based on the information in the `INNODB_CMP' tables and
overall application performance and hardware resource utilization, you
might make changes in your hardware configuration, adjust the size of
the InnoDB buffer pool, choose a different page size, or select a
different set of tables to compress.

If the amount of CPU time required for compressing and uncompressing is
high, changing to faster CPUs, or those with more cores, can help
improve performance with the same data, application workload and set of
compressed tables. Increasing the size of the InnoDB buffer pool might
also help performance, so that more uncompressed pages can stay in
memory, reducing the need to uncompress pages that exist in memory only
in compressed form.

A large number of compression operations overall (compared to the
number of `INSERT', `UPDATE' and `DELETE' operations in your
application and the size of the database) could indicate that some of
your compressed tables are being updated too heavily for effective
compression. If so, choose a larger page size, or be more selective
about which tables you compress.

If the number of `successful' compression operations
(`COMPRESS_OPS_OK') is a high percentage of the total number of
compression operations (`COMPRESS_OPS'), then the system is likely
performing well. If the ratio is low, then InnoDB is reorganizing,
recompressing, and splitting B-tree nodes more often than is desirable.
In this case, avoid compressing some tables, or increase
`KEY_BLOCK_SIZE' for some of the compressed tables. You might turn off
compression for tables that cause the number of `compression failures'
in your application to be more than 1% or 2% of the total. (Such a
failure ratio might be acceptable during a temporary operation such as a
data load).


File: manual.info,  Node: innodb-compression-internals,  Prev: innodb-compression-tuning,  Up: innodb-compression

14.4.3.6 How Compression Works in InnoDB
........................................

This section describes some internal implementation details about
compression in InnoDB. The information presented here may be helpful in
tuning for performance, but is not necessary to know for basic use of
compression.

* Compression Algorithms *

Some operating systems implement compression at the file system level.
Files are typically divided into fixed-size blocks that are compressed
into variable-size blocks, which easily leads into fragmentation. Every
time something inside a block is modified, the whole block is
recompressed before it is written to disk.  These properties make this
compression technique unsuitable for use in an update-intensive
database system.

InnoDB implements compression with the help of the well-known zlib
library (http://www.zlib.net/), which implements the LZ77 compression
algorithm. This compression algorithm is mature, robust, and efficient
in both CPU utilization and in reduction of data size. The algorithm is
`lossless', so that the original uncompressed data can always be
reconstructed from the compressed form. LZ77 compression works by
finding sequences of data that are repeated within the data to be
compressed. The patterns of values in your data determine how well it
compresses, but typical user data often compresses by 50% or more.

Unlike compression performed by an application, or compression features
of some other database management systems, InnoDB compression applies
both to user data and to indexes. In many cases, indexes can constitute
40-50% or more of the total database size, so this difference is
significant. When compression is working well for a data set, the size
of the InnoDB data files (the `.idb' files) is 25% to 50% of the
uncompressed size or possibly smaller. Depending on the workload, this
smaller database can in turn lead to a reduction in I/O, and an
increase in throughput, at a modest cost in terms of increased CPU
utilization.

* InnoDB Data Storage and Compression *

All user data in InnoDB is stored in pages comprising a B-tree index
(the clustered index). In some other database systems, this type of
index is called an `index-organized table'. Each row in the index node
contains the values of the (user-specified or system-generated) primary
key and all the other columns of the table.

Secondary indexes in InnoDB are also B-trees, containing pairs of
values: the index key and a pointer to a row in the clustered index.
The pointer is in fact the value of the primary key of the table, which
is used to access the clustered index if columns other than the index
key and primary key are required. Secondary index records must always
fit on a single B-tree page.

The compression of B-tree nodes (of both clustered and secondary
indexes) is handled differently from compression of overflow pages used
to store long `VARCHAR', `BLOB', or `TEXT' columns, as explained in the
following sections.

* Compression of B-Tree Pages *

Because they are frequently updated, B-tree pages require special
treatment. It is important to minimize the number of times B-tree nodes
are split, as well as to minimize the need to uncompress and recompress
their content.

One technique InnoDB uses is to maintain some system information in the
B-tree node in uncompressed form, thus facilitating certain in-place
updates. For example, this allows rows to be delete-marked and deleted
without any compression operation.

In addition, InnoDB attempts to avoid unnecessary uncompression and
recompression of index pages when they are changed. Within each B-tree
page, the system keeps an uncompressed `modification log' to record
changes made to the page. Updates and inserts of small records may be
written to this modification log without requiring the entire page to be
completely reconstructed.

When the space for the modification log runs out, InnoDB uncompresses
the page, applies the changes and recompresses the page. If
recompression fails, the B-tree nodes are split and the process is
repeated until the update or insert succeeds.

Generally, InnoDB requires that each B-tree page can accommodate at
least two records. For compressed tables, this requirement has been
relaxed. Leaf pages of B-tree nodes (whether of the primary key or
secondary indexes) only need to accommodate one record, but that record
must fit in uncompressed form, in the per-page modification log.
Starting with InnoDB storage engine version 1.0.2, and if InnoDB strict
mode is `ON', the InnoDB storage engine checks the maximum row size
during *Note `CREATE TABLE': create-table. or *Note `CREATE INDEX':
create-index. If the row does not fit, the following error message is
issued: `ERROR HY000: Too big row'.

If you create a table when InnoDB strict mode is OFF, and a subsequent
`INSERT' or `UPDATE' statement attempts to create an index entry that
does not fit in the size of the compressed page, the operation fails
with `ERROR 42000: Row size too large'. (This error message does not
name the index for which the record is too large, or mention the length
of the index record or the maximum record size on that particular index
page.) To solve this problem, rebuild the table with *Note `ALTER
TABLE': alter-table.  and select a larger compressed page size
(`KEY_BLOCK_SIZE'), shorten any column prefix indexes, or disable
compression entirely with `ROW_FORMAT=DYNAMIC' or `ROW_FORMAT=COMPACT'.

* Compressing BLOB, VARCHAR, and TEXT Columns *

In a clustered index, `BLOB', `VARCHAR', and `TEXT' columns that are
not part of the primary key may be stored on separately allocated
(`overflow') pages. We call these off-page columns whose values are
stored on singly-linked lists of overflow pages.

For tables created in `ROW_FORMAT=DYNAMIC' or `ROW_FORMAT=COMPRESSED',
the values of `BLOB', `TEXT', or `VARCHAR' columns may be stored fully
off-page, depending on their length and the length of the entire row.
For columns that are stored off-page, the clustered index record only
contains 20-byte pointers to the overflow pages, one per column.
Whether any columns are stored off-page depends on the page size and
the total size of the row. When the row is too long to fit entirely
within the page of the clustered index, InnoDB chooses the longest
columns for off-page storage until the row fits on the clustered index
page. As noted above, if a row does not fit by itself on a compressed
page, an error occurs.

Tables created in previous versions of InnoDB use the Antelope file
format, which supports only `ROW_FORMAT=REDUNDANT' and
`ROW_FORMAT=COMPACT'. In these formats, InnoDB stores the first 768
bytes of `BLOB', `VARCHAR', and `TEXT' columns in the clustered index
record along with the primary key. The 768-byte prefix is followed by a
20-byte pointer to the overflow pages that contain the rest of the
column value.

When a table is in `COMPRESSED' format, all data written to overflow
pages is compressed `as is'; that is, InnoDB applies the zlib
compression algorithm to the entire data item. Other than the data,
compressed overflow pages contain an uncompressed header and trailer
comprising a page checksum and a link to the next overflow page, among
other things. Therefore, very significant storage savings can be
obtained for longer `BLOB', `TEXT', or `VARCHAR' columns if the data is
highly compressible, as is often the case with text data (but not
previously compressed images).

The overflow pages are of the same size as other pages. A row
containing ten columns stored off-page occupies ten overflow pages,
even if the total length of the columns is only 8K bytes.  In an
uncompressed table, ten uncompressed overflow pages occupy 160K bytes.
In a compressed table with an 8K page size, they occupy only 80K bytes.
Thus, it is often more efficient to use compressed table format for
tables with long column values.

Using a 16K compressed page size can reduce storage and I/O costs for
`BLOB', `VARCHAR', or `TEXT' columns, because such data often compress
well, and might therefore require fewer `overflow' pages, even though
the B-tree nodes themselves take as many pages as in the uncompressed
form.

* Compression and the InnoDB Buffer Pool *

In a compressed InnoDB table, every compressed page (whether 1K, 2K, 4K
or 8K) corresponds to an uncompressed page of 16K bytes. To access the
data in a page, InnoDB reads the compressed page from disk if it is not
already in the buffer pool, then uncompresses the page to its original
16K byte form. This section describes how InnoDB manages the buffer
pool with respect to pages of compressed tables.

To minimize I/O and to reduce the need to uncompress a page, at times
the buffer pool contains both the compressed and uncompressed form of a
database page. To make room for other required database pages, InnoDB
may `evict' from the buffer pool an uncompressed page, while leaving
the compressed page in memory. Or, if a page has not been accessed in a
while, the compressed form of the page may be written to disk, to free
space for other data. Thus, at any given time, the buffer pool may
contain both the compressed and uncompressed forms of the page, or only
the compressed form of the page, or neither.

InnoDB keeps track of which pages to keep in memory and which to evict
using a least-recently-used (LRU) list, so that `hot' or frequently
accessed data tends to stay in memory. When compressed tables are
accessed, InnoDB uses an adaptive LRU algorithm to achieve an
appropriate balance of compressed and uncompressed pages in memory.
This adaptive algorithm is sensitive to whether the system is running
in an I/O-bound or CPU-bound manner. The goal is to avoid spending too
much processing time uncompressing pages when the CPU is busy, and to
avoid doing excess I/O when the CPU has spare cycles that can be used
for uncompressing compressed pages (that may already be in memory).
When the system is I/O-bound, the algorithm prefers to evict the
uncompressed copy of a page rather than both copies, to make more room
for other disk pages to become memory resident.  When the system is
CPU-bound, InnoDB prefers to evict both the compressed and uncompressed
page, so that more memory can be used for `hot' pages and reducing the
need to uncompress data in memory only in compressed form.

* Compression and the InnoDB Log Files *

Before a compressed page is written to a database file, InnoDB writes a
copy of the page to the redo log (if it has been recompressed since the
last time it was written to the database).  This is done to ensure that
redo logs will always be usable, even if a future version of InnoDB
uses a slightly different compression algorithm. Therefore, some
increase in the size of log files, or a need for more frequent
checkpoints, can be expected when using compression. The amount of
increase in the log file size or checkpoint frequency depends on the
number of times compressed pages are modified in a way that requires
reorganization and recompression.

Note that the redo log file format (and the database file format) are
different from previous releases when using compression. The MySQL
Enterprise Backup product does support this latest Barracuda file
format for compressed InnoDB tables. The older InnoDB Hot Backup
product can only back up tables using the file format Antelope, and
thus does not support InnoDB tables that use compression.


File: manual.info,  Node: innodb-file-format,  Next: innodb-row-format,  Prev: innodb-compression,  Up: innodb-5-5

14.4.4 InnoDB File-Format Management
------------------------------------

* Menu:

* innodb-file-format-enabling::  Enabling File Formats
* innodb-file-format-compatibility::  Verifying File Format Compatibility
* innodb-file-format-identifying::  Identifying the File Format in Use
* innodb-file-format-downgrading::  Downgrading the File Format
* innodb-file-format-future::    Future InnoDB File Formats

As InnoDB evolves, new on-disk data structures are sometimes required
to support new features. Features such as compressed tables (see *Note
innodb-compression::), and long variable-length columns stored off-page
(see *Note innodb-row-format::) require data file formats that are not
compatible with prior versions of InnoDB. These features both require
use of the new Barracuda file format.

*Note*:

All other new features are compatible with the original Antelope file
format and do not require the Barracuda file format.

This section discusses enabling file formats for new InnoDB tables,
verifying compatibility of different file formats between MySQL
releases, identifying the file format in use, downgrading the file
format, and file format names that may be used in the future.

Named File Formats

InnoDB 1.1 has the idea of a named file format and a configuration
parameter to enable the use of features that require use of that
format. The new file format is the Barracuda format, and the original
InnoDB file format is called Antelope. Compressed tables and the new
row format that stores long columns `off-page' require the use of the
Barracuda file format or newer. Future versions of InnoDB may introduce
a series of file formats, *Note identified with the names of animals:
innodb-file-format-future, in ascending alphabetic order.


File: manual.info,  Node: innodb-file-format-enabling,  Next: innodb-file-format-compatibility,  Prev: innodb-file-format,  Up: innodb-file-format

14.4.4.1 Enabling File Formats
..............................

The configuration parameter `innodb_file_format' controls whether such
statements as *Note `CREATE TABLE': create-table. and *Note `ALTER
TABLE': alter-table. can be used to create tables that depend on
support for the Barracuda file format.

Although Oracle recommends using the Barracuda format for new tables
where practical, in MySQL 5.5 the default file format is still
Antelope, for maximum compatibility with replication configurations
containing different MySQL releases.

The file format is a dynamic, global parameter that can be specified in
the MySQL option file (`my.cnf' or `my.ini') or changed with the `SET
GLOBAL' command.


File: manual.info,  Node: innodb-file-format-compatibility,  Next: innodb-file-format-identifying,  Prev: innodb-file-format-enabling,  Up: innodb-file-format

14.4.4.2 Verifying File Format Compatibility
............................................

* Menu:

* innodb-file-format-compatibility-checking::  Compatibility Check When InnoDB Is Started
* innodb-file-format-compatibility-checking-table-access::  Compatibility Check When a Table Is Opened

InnoDB 1.1 incorporates several checks to guard against the possible
crashes and data corruptions that might occur if you run an older
release of the MySQL server on InnoDB data files using a newer file
format. These checks take place when the server is started, and when
you first access a table. This section describes these checks, how you
can control them, and error and warning conditions that might arise.

* Backward Compatibility *

Considerations of backward compatibility only apply when using a recent
version of InnoDB (the InnoDB Plugin, or MySQL 5.5 and higher with
InnoDB 1.1) alongside an older one (MySQL 5.1 or earlier, with the
built-in InnoDB rather than the InnoDB Plugin).  To minimize the chance
of compatibility issues, you can standardize on the InnoDB Plugin for
all your MySQL 5.1 and earlier database servers.

In general, a newer version of InnoDB may create a table or index that
cannot safely be read or written with a prior version of InnoDB without
risk of crashes, hangs, wrong results or corruptions. InnoDB 1.1
includes a mechanism to guard against these conditions, and to help
preserve compatibility among database files and versions of InnoDB.
This mechanism lets you take advantage of some new features of an
InnoDB release (such as performance improvements and bug fixes), and
still preserve the option of using your database with a prior version
of InnoDB, by preventing accidental use of new features that create
downward-incompatible disk files.

If a version of InnoDB supports a particular file format (whether or
not that format is the default), you can query and update any table
that requires that format or an earlier format. Only the creation of
new tables using new features is limited based on the particular file
format enabled. Conversely, if a tablespace contains a table or index
that uses a file format that is not supported by the currently running
software, it cannot be accessed at all, even for read access.

The only way to `downgrade' an InnoDB tablespace to an earlier file
format is to copy the data to a new table, in a tablespace that uses
the earlier format. This can be done with the *Note `ALTER TABLE':
alter-table. statement, as described in *Note
innodb-file-format-downgrading::.

The easiest way to determine the file format of an existing InnoDB
tablespace is to examine the properties of the table it contains, using
the `SHOW TABLE STATUS' command or querying the table
`INFORMATION_SCHEMA.TABLES'. If the `Row_format' of the table is
reported as `'Compressed'' or `'Dynamic'', the tablespace containing
the table uses the Barracuda format.  Otherwise, it uses the prior
InnoDB file format, Antelope.

* Internal Details *

Every InnoDB per-table tablespace (represented by a `*.ibd' file) file
is labeled with a file format identifier. The system tablespace
(represented by the `ibdata' files) is tagged with the `highest' file
format in use in a group of InnoDB database files, and this tag is
checked when the files are opened.

Creating a compressed table, or a table with `ROW_FORMAT=DYNAMIC',
updates the file header for the corresponding `.ibd' file and the table
type in the InnoDB data dictionary with the identifier for the
Barracuda file format. From that point forward, the table cannot be
used with a version of InnoDB that does not support this new file
format. To protect against anomalous behavior, InnoDB version 5.0.21
and later performs a compatibility check when the table is opened. (In
many cases, the *Note `ALTER TABLE': alter-table. statement recreates a
table and thus changes its properties. The special case of adding or
dropping indexes without rebuilding the table is described in *Note
innodb-create-index::.)

* Definition of ib-file set *

To avoid confusion, for the purposes of this discussion we define the
term `ib-file set' to mean the set of operating system files that
InnoDB manages as a unit. The ib-file set includes the following files:

   * The system tablespace (one or more `ibdata' files) that contain
     internal system information (including internal catalogs and undo
     information) and may include user data and indexes.

   * Zero or more single-table tablespaces (also called `file per
     table' files, named `*.ibd' files).

   * InnoDB log files; usually two, `ib_logfile0' and `ib_logfile1'.
     Used for crash recovery and in backups.

An `ib-file set' does not include the corresponding `.frm' files that
contain metadata about InnoDB tables. The `.frm' files are created and
managed by MySQL, and can sometimes get out of sync with the internal
metadata in InnoDB.

Multiple tables, even from more than one database, can be stored in a
single `ib-file set'. (In MySQL, a `database' is a logical collection
of tables, what other systems refer to as a `schema' or `catalog'.)


File: manual.info,  Node: innodb-file-format-compatibility-checking,  Next: innodb-file-format-compatibility-checking-table-access,  Prev: innodb-file-format-compatibility,  Up: innodb-file-format-compatibility

14.4.4.3 Compatibility Check When InnoDB Is Started
...................................................

To prevent possible crashes or data corruptions when InnoDB opens an
ib-file set, it checks that it can fully support the file formats in
use within the ib-file set. If the system is restarted following a
crash, or a `fast shutdown' (i.e., `innodb_fast_shutdown' is greater
than zero), there may be on-disk data structures (such as redo or undo
entries, or doublewrite pages) that are in a `too-new' format for the
current software. During the recovery process, serious damage can be
done to your data files if these data structures are accessed. The
startup check of the file format occurs before any recovery process
begins, thereby preventing consistency issues with the new tables or
startup problems for the MySQL server.

Beginning with version InnoDB 1.0.1, the system tablespace records an
identifier or tag for the `highest' file format used by any table in
any of the tablespaces that is part of the ib-file set. Checks against
this file format tag are controlled by the configuration parameter
`innodb_file_format_check', which is `ON' by default.

If the file format tag in the system tablespace is newer or higher than
the highest version supported by the particular currently executing
software and if `innodb_file_format_check' is `ON', the following error
is issued when the server is started:

     InnoDB: Error: the system tablespace is in a
     file format that this version doesn't support

You can also set `innodb_file_format' to a file format name. Doing so
prevents InnoDB from starting if the current software does not support
the file format specified. It also sets the `high water mark' to the
value you specify. The ability to set `innodb_file_format_check' will
be useful (with future releases of InnoDB) if you manually `downgrade'
all of the tables in an ib-file set (as described in *Note
innodb-downgrading::). You can then rely on the file format check at
startup if you subsequently use an older version of InnoDB to access
the ib-file set.

In some limited circumstances, you might want to start the server and
use an ib-file set that is in a `too new' format (one that is not
supported by the software you are using). If you set the configuration
parameter `innodb_file_format_check' to `OFF', InnoDB opens the
database, but issues this warning message in the error log:

     InnoDB: Warning: the system tablespace is in a
     file format that this version doesn't support

*Note*:

This is a very dangerous setting, as it permits the recovery process to
run, possibly corrupting your database if the previous shutdown was a
crash or `fast shutdown'.  You should only set
`innodb_file_format_check' to `OFF' if you are sure that the previous
shutdown was done with `innodb_fast_shutdown=0', so that essentially no
recovery process occurs. In a future release, this parameter setting
may be renamed from `OFF' to `UNSAFE'. (However, until there are newer
releases of InnoDB that support additional file formats, even disabling
the startup checking is in fact `safe'.)

The parameter `innodb_file_format_check' affects only what happens when
a database is opened, not subsequently. Conversely, the parameter
`innodb_file_format' (which enables a specific format) only determines
whether or not a new table can be created in the enabled format and has
no effect on whether or not a database can be opened.

The file format tag is a `high water mark', and as such it is increased
after the server is started, if a table in a `higher' format is created
or an existing table is accessed for read or write (assuming its format
is supported). If you access an existing table in a format higher than
the format the running software supports, the system tablespace tag is
not updated, but table-level compatibility checking applies (and an
error is issued), as described in *Note
innodb-file-format-compatibility-checking-table-access::.  Any time the
high water mark is updated, the value of `innodb_file_format_check' is
updated as well, so the command `SELECT @@innodb_file_format_check;'
displays the name of the newest file format known to be used by tables
in the currently open ib-file set and supported by the currently
executing software.

To best illustrate this behavior, consider the scenario described in
*Note innodb-file-format-compatibility-table::.  Imagine that some
future version of InnoDB supports the Cheetah format and that an
ib-file set has been used with that version.

*InnoDB Data File Compatibility and Related InnoDB Parameters*

innodb file format check                    innodb  Highest file format used in ib-file set                           Highest file format supported by InnoDB                           Result
                                            file                                                                                                                                        
                                            format                                                                                                                                      
`OFF'                                       `Antelope'`Barracuda'                                                       `Barracuda'                                                       Database can be opened;
                                            or                                                                                                                                          tables can be created
                                            `Barracuda'                                                                                                                                    which require Antelope or
                                                                                                                                                                                        Barracuda file format
`OFF'                                       `Antelope'`Cheetah'                                                         `Barracuda'                                                       Database can be opened
                                            or                                                                                                                                          with a warning, since the
                                            `Barracuda'                                                                                                                                    database contains files in
                                                                                                                                                                                        a `too new' format; tables
                                                                                                                                                                                        can be created in Antelope
                                                                                                                                                                                        or Barracuda file format;
                                                                                                                                                                                        tables in Cheetah format
                                                                                                                                                                                        cannot be accessed
`OFF'                                       `Cheetah'`Barracuda'                                                       `Barracuda'                                                       Database cannot be opened;
                                                                                                                                                                                        `innodb_file_format'
                                                                                                                                                                                        cannot be set to Cheetah
`ON'                                        `Antelope'`Barracuda'                                                       `Barracuda'                                                       Database can be opened;
                                            or                                                                                                                                          tables can be created in
                                            `Barracuda'                                                                                                                                    Antelope or Barracuda file
                                                                                                                                                                                        format
`ON'                                        `Antelope'`Cheetah'                                                         `Barracuda'                                                       Database cannot be opened,
                                            or                                                                                                                                          since the database
                                            `Barracuda'                                                                                                                                    contains files in a `too
                                                                                                                                                                                        new' format (Cheetah)
`ON'                                        `Cheetah'`Barracuda'                                                       `Barracuda'                                                       Database cannot be opened;
                                                                                                                                                                                        `innodb_file_format'
                                                                                                                                                                                        cannot be set to Cheetah


File: manual.info,  Node: innodb-file-format-compatibility-checking-table-access,  Prev: innodb-file-format-compatibility-checking,  Up: innodb-file-format-compatibility

14.4.4.4 Compatibility Check When a Table Is Opened
...................................................

When a table is first accessed, InnoDB (including some releases prior
to InnoDB 1.0) checks that the file format of the tablespace in which
the table is stored is fully supported. This check prevents crashes or
corruptions that would otherwise occur when tables using a `too new'
data structure are encountered.

All tables using any file format supported by a release can be read or
written (assuming the user has sufficient privileges).  The setting of
the system configuration parameter `innodb_file_format' can prevent
creating a new table that uses specific file formats, even if they are
supported by a given release. Such a setting might be used to preserve
backward compatibility, but it does not prevent accessing any table
that uses any supported format.

As noted in *Note innodb-file-format-named::, versions of MySQL older
than 5.0.21 cannot reliably use database files created by newer
versions if a new file format was used when a table was created. To
prevent various error conditions or corruptions, InnoDB checks file
format compatibility when it opens a file (for example, upon first
access to a table). If the currently running version of InnoDB does not
support the file format identified by the table type in the InnoDB data
dictionary, MySQL reports the following error:

     ERROR 1146 (42S02): Table 'TEST.T1' doesn't exist

InnoDB also writes a message to the error log:

     InnoDB: table TEST/T1: unknown table type 33

The table type should be equal to the tablespace flags, which contains
the file format version as discussed in *Note
innodb-file-format-identifying::.

Versions of InnoDB prior to MySQL 4.1 did not include table format
identifiers in the database files, and versions prior to MySQL 5.0.21
did not include a table format compatibility check.  Therefore, there
is no way to ensure proper operations if a table in a `too new' format
is used with versions of InnoDB prior to 5.0.21.

The file format management capability in InnoDB 1.0 and higher
(tablespace tagging and run-time checks) allows InnoDB to verify as
soon as possible that the running version of software can properly
process the tables existing in the database.

If you permit InnoDB to open a database containing files in a format it
does not support (by setting the parameter `innodb_file_format_check' to
`OFF'), the table-level checking described in this section still
applies.

Users are _strongly_ urged not to use database files that contain
Barracuda file format tables with releases of InnoDB older than the
MySQL 5.1 with the InnoDB Plugin. It is possible to `downgrade' such
tables to the Antelope format with the procedure described in *Note
innodb-file-format-downgrading::.


File: manual.info,  Node: innodb-file-format-identifying,  Next: innodb-file-format-downgrading,  Prev: innodb-file-format-compatibility,  Up: innodb-file-format

14.4.4.5 Identifying the File Format in Use
...........................................

After you enable a given `innodb_file_format', this change applies only
to newly created tables rather than existing ones. If you do create a
new table, the tablespace containing the table is tagged with the
`earliest' or `simplest' file format that is required for the table's
features. For example, if you enable file format Barracuda, and create
a new table that is not compressed and does not use
`ROW_FORMAT=DYNAMIC', the new tablespace that contains the table is
tagged as using file format Antelope.

It is easy to identify the file format used by a given tablespace or
table. The table uses the Barracuda format if the `Row_format' reported
by `SHOW CREATE TABLE' or `INFORMATION_SCHEMA.TABLES' is one of
`'Compressed'' or `'Dynamic''. (The `Row_format' is a separate column;
ignore the contents of the `Create_options' column, which may contain
the string `ROW_FORMAT'.) If the table in a tablespace uses neither of
those features, the file uses the format supported by prior releases of
InnoDB, now called file format Antelope. Then, the `Row_format' is one
of `'Redundant'' or `'Compact''.

* Internal Details *

InnoDB has two different file formats (Antelope and Barracuda) and four
different row formats (Redundant, Compact, Dynamic, and Compressed).
The Antelope file format contains Redundant and Compact row formats. A
tablespace that uses the Barracuda file format uses either the Dynamic
or Compressed row format.

File and row format information is written in the tablespace flags (a
32-bit number) in the `*.ibd' file in the 4 bytes starting at position
54 of the file, most significant byte first (the first byte of the file
is byte zero). On some systems, you can display these bytes in
hexadecimal with the command `od -t x1 -j 54 -N 4 TABLENAME.ibd'. If
all bytes are zero, the tablespace uses the Antelope file format, which
is the format used by the standard InnoDB storage engine up to MySQL
5.1.

The first 6 bits of the tablespace flags can be described this way:

   * Bit 0: Zero for Antelope and no other bits will be set. One for
     Barracuda, and other bits may be set.

   * Bits 1 to 4: A 4 bit number representing the compressed page size.
     zero = not compressed, 1 = 1k, 2 = 2k, 3 = 4k, 4 = 8k.

   * Bit 5: Same value as Bit 0, zero for Antelope, and one for
     Barracuda. If Bit 0 and Bit 5 are set and Bits 1 to 4 are not, the
     row format is `Dynamic'.

Until MySQL 5.6, no other bits are set in the tablespace flags. If bits
6 to 31 are not zero, the tablespace is corrupt or is not an InnoDB
tablespace file.


File: manual.info,  Node: innodb-file-format-downgrading,  Next: innodb-file-format-future,  Prev: innodb-file-format-identifying,  Up: innodb-file-format

14.4.4.6 Downgrading the File Format
....................................

Each InnoDB tablespace file (with a name matching `*.ibd') is tagged
with the file format used to create its table and indexes. The way to
downgrade the tablespace is to re-create the table and its indexes. The
easiest way to recreate a table and its indexes is to use the command:

     ALTER TABLE T ROW_FORMAT=COMPACT;

on each table that you want to downgrade. The `COMPACT' row format uses
the file format Antelope. It was introduced in MySQL 5.0.3.


File: manual.info,  Node: innodb-file-format-future,  Prev: innodb-file-format-downgrading,  Up: innodb-file-format

14.4.4.7 Future InnoDB File Formats
...................................

The file format used by the standard built-in InnoDB in MySQL 5.1 is
the Antelope format. The file format introduced with InnoDB Plugin 1.0
is the Barracuda format. Although no new features have been announced
that would require additional new file formats, the InnoDB file format
mechanism allows for future enhancements.

For the sake of completeness, these are the file format names that
might be used for future file formats: Antelope, Barracuda, Cheetah,
Dragon, Elk, Fox, Gazelle, Hornet, Impala, Jaguar, Kangaroo, Leopard,
Moose, Nautilus, Ocelot, Porpoise, Quail, Rabbit, Shark, Tiger, Urchin,
Viper, Whale, Xenops, Yak and Zebra.  These file formats correspond to
the internal identifiers 0..25.


File: manual.info,  Node: innodb-row-format,  Next: innodb-information-schema,  Prev: innodb-file-format,  Up: innodb-5-5

14.4.5 How InnoDB Stores Variable-Length Columns
------------------------------------------------

* Menu:

* innodb-row-format-overview::   Overview of InnoDB Row Storage
* innodb-row-format-specification::  Specifying the Row Format for a Table
* innodb-row-format-dynamic::    Barracuda File Format: `DYNAMIC' and `COMPRESSED' Row Formats
* innodb-row-format-antelope::   Antelope File Format: `COMPACT' and `REDUNDANT' Row Formats

This section discusses how certain InnoDB features, such as table
compression and off-page storage of long columns, are controlled by the
`ROW_FORMAT' clause of the `CREATE TABLE' statement. It discusses
considerations for choosing the right row format and compatibility of
row formats between MySQL releases.


File: manual.info,  Node: innodb-row-format-overview,  Next: innodb-row-format-specification,  Prev: innodb-row-format,  Up: innodb-row-format

14.4.5.1 Overview of InnoDB Row Storage
.......................................

The storage for rows and associated columns affects performance for
queries and DML operations. As more rows fit into a single disk page,
queries and index lookups can work faster, less cache memory is
required in the InnoDB buffer pool, and less I/O is required to write
out updated values for the numeric and short string columns.

All data in InnoDB is stored in database pages that make up a B-tree
index (the clustered index organized according to the primary key
columns).  Table data and indexes both use this type of structure. The
nodes of the index data structure contain the values of all the columns
in that row (for the clustered index) or the index columns and the
primary key columns (for secondary indexes).

Variable-length columns are an exception to this rule. Columns such as
`BLOB' and `VARCHAR' that are too long to fit on a B-tree page are
stored on separately allocated disk pages called overflow pages. We call
such columns off-page column. The values of these columns are stored on
singly-linked lists of overflow pages, and each such column has its own
list of one or more overflow pages. In some cases, all or a prefix of
the long column value is stored in the B-tree, to avoid wasting storage
and eliminating the need to read a separate page.

The Barracuda file format provides a new option (`KEY_BLOCK_SIZE') to
control how much column data is stored in the clustered index, and how
much is placed on overflow pages.


File: manual.info,  Node: innodb-row-format-specification,  Next: innodb-row-format-dynamic,  Prev: innodb-row-format-overview,  Up: innodb-row-format

14.4.5.2 Specifying the Row Format for a Table
..............................................

You specify the row format for a table with the `ROW_FORMAT' clause of
the *Note `CREATE TABLE': create-table. and *Note `ALTER TABLE':
alter-table. statements.


File: manual.info,  Node: innodb-row-format-dynamic,  Next: innodb-row-format-antelope,  Prev: innodb-row-format-specification,  Up: innodb-row-format

14.4.5.3 Barracuda File Format: `DYNAMIC' and `COMPRESSED' Row Formats
......................................................................

When `innodb_file_format' is set to Barracuda and a table is created
with `ROW_FORMAT=DYNAMIC' or `ROW_FORMAT=COMPRESSED', long column
values are stored fully off-page, and the clustered index record
contains only a 20-byte pointer to the overflow page.

Whether any columns are stored off-page depends on the page size and
the total size of the row. When the row is too long, InnoDB chooses the
longest columns for off-page storage until the clustered index record
fits on the B-tree page.

The `DYNAMIC' row format maintains the efficiency of storing the entire
row in the index node if it fits (as do the `COMPACT' and `REDUNDANT'
formats), but this new format avoids the problem of filling B-tree
nodes with a large number of data bytes of long columns. The `DYNAMIC'
format is based on the idea that if a portion of a long data value is
stored off-page, it is usually most efficient to store all of the value
off-page. With `DYNAMIC' format, shorter columns are likely to remain
in the B-tree node, minimizing the number of overflow pages needed for
any given row.

The `COMPRESSED' row format uses similar internal details for off-page
storage as the `DYNAMIC' row format, with additional storage and
performance considerations from the table and index data being
compressed and using smaller page sizes. For full details about the
`COMPRESSED' row format, see *Note innodb-compression::.


File: manual.info,  Node: innodb-row-format-antelope,  Prev: innodb-row-format-dynamic,  Up: innodb-row-format

14.4.5.4 Antelope File Format: `COMPACT' and `REDUNDANT' Row Formats
....................................................................

Early versions of InnoDB used an unnamed file format (now called
Antelope) for database files.  With that format, tables were defined
with `ROW_FORMAT=COMPACT' (or `ROW_FORMAT=REDUNDANT') and InnoDB stored
up to the first 768 bytes of variable-length columns (such as `BLOB'
and `VARCHAR') in the index record within the B-tree node, with the
remainder stored on the overflow pages.

To preserve compatibility with those prior versions, tables created
with the newest InnoDB use the prefix format, unless one of
`ROW_FORMAT=DYNAMIC' or `ROW_FORMAT=COMPRESSED' is specified (or
implied) on the *Note `CREATE TABLE': create-table. statement.

With the Antelope file format, if the value of a column is 768 bytes or
less, no overflow page is needed, and some savings in I/O may result,
since the value is in the B-tree node. This works well for relatively
short `BLOB' values, but may cause B-tree nodes to fill with data
rather than key values, reducing their efficiency. Tables with many
`BLOB' columns could cause B-tree nodes to become too full of data, and
contain too few rows, making the entire index less efficient than if the
rows were shorter or if the column values were stored off-page.


File: manual.info,  Node: innodb-information-schema,  Next: innodb-performance,  Prev: innodb-row-format,  Up: innodb-5-5

14.4.6 InnoDB `INFORMATION_SCHEMA' tables
-----------------------------------------

* Menu:

* innodb-information-schema-compression-tables::  Information Schema Tables about Compression
* innodb-information-schema-transactions::  Information Schema Tables about Transactions
* innodb-information-schema-notes::  Special Locking Considerations for InnoDB `INFORMATION_SCHEMA' Tables

The *Note `INFORMATION_SCHEMA': information-schema.  is a MySQL feature
that helps you monitor server activity to diagnose capacity and
performance issues. Several InnoDB-related `INFORMATION_SCHEMA' tables
(*Note `INNODB_CMP': innodb-cmp-table, *Note `INNODB_CMP_RESET':
innodb-cmp-table, *Note `INNODB_CMPMEM': innodb-cmpmem-table, *Note
`INNODB_CMPMEM_RESET': innodb-cmpmem-table, *Note `INNODB_TRX':
innodb-trx-table, *Note `INNODB_LOCKS': innodb-locks-table. and *Note
`INNODB_LOCK_WAITS': innodb-lock-waits-table.) contain live information
about compressed InnoDB tables, the compressed InnoDB buffer pool, all
transactions currently executing inside InnoDB, the locks that
transactions hold and those that are blocking transactions waiting for
access to a resource (a table or row).

The Information Schema tables are themselves plugins to the MySQL
server, and must be activated by `INSTALL' statements. If they are
installed, but the InnoDB storage engine plugin is not installed, these
tables appear to be empty.

This section describes the InnoDB-related Information Schema tables and
shows some examples of their use.


File: manual.info,  Node: innodb-information-schema-compression-tables,  Next: innodb-information-schema-transactions,  Prev: innodb-information-schema,  Up: innodb-information-schema

14.4.6.1 Information Schema Tables about Compression
....................................................

* Menu:

* innodb-information-schema-innodb_cmp::  `INNODB_CMP' and `INNODB_CMP_RESET'
* innodb-information-schema-innodb_cmpmem::  `INNODB_CMPMEM' and `INNODB_CMPMEM_RESET'
* innodb-information-schema-examples-compression-sect::  Using the Compression Information Schema Tables

Two new pairs of Information Schema tables provided by the InnoDB
storage engine can give you some insight into how well compression is
working overall. One pair of tables contains information about the
number of compression operations and the amount of time spent
performing compression. Another pair of tables contains information on
the way memory is allocated for compression.


File: manual.info,  Node: innodb-information-schema-innodb_cmp,  Next: innodb-information-schema-innodb_cmpmem,  Prev: innodb-information-schema-compression-tables,  Up: innodb-information-schema-compression-tables

14.4.6.2 `INNODB_CMP' and `INNODB_CMP_RESET'
............................................

The *Note `INNODB_CMP': innodb-cmp-table. and *Note `INNODB_CMP_RESET':
innodb-cmp-table.  tables contain status information on the operations
related to compressed tables, which are covered in *Note
innodb-compression::. The compressed page size is in the column
`PAGE_SIZE'.

These two tables have identical contents, but reading from *Note
`INNODB_CMP_RESET': innodb-cmp-table.  resets the statistics on
compression and uncompression operations. For example, if you archive
the output of *Note `INNODB_CMP_RESET': innodb-cmp-table.  every 60
minutes, you see the statistics for each hourly period.  If you monitor
the output of *Note `INNODB_CMP': innodb-cmp-table. (making sure never
to read *Note `INNODB_CMP_RESET': innodb-cmp-table.), you see the
cumulated statistics since InnoDB was started.

For the table definition, see *Note
innodb-information-schema-innodb_cmp_columns_table::.


File: manual.info,  Node: innodb-information-schema-innodb_cmpmem,  Next: innodb-information-schema-examples-compression-sect,  Prev: innodb-information-schema-innodb_cmp,  Up: innodb-information-schema-compression-tables

14.4.6.3 `INNODB_CMPMEM' and `INNODB_CMPMEM_RESET'
..................................................

The *Note `INNODB_CMPMEM': innodb-cmpmem-table. and *Note
`INNODB_CMPMEM_RESET': innodb-cmpmem-table.  tables contain status
information on the compressed pages that reside in the buffer pool.
Please consult *Note innodb-compression:: for further information on
compressed tables and the use of the buffer pool. The *Note
`INNODB_CMP': innodb-cmp-table. and *Note `INNODB_CMP_RESET':
innodb-cmp-table.  tables should provide more useful statistics on
compression.

* Internal Details *

The InnoDB storage engine uses a so-called `buddy allocator' system to
manage memory allocated to pages of various sizes, from 1KB to 16KB.
Each row of the two tables described here corresponds to a single page
size.

These two tables have identical contents, but reading from *Note
`INNODB_CMPMEM_RESET': innodb-cmpmem-table.  resets the statistics on
relocation operations. For example, if every 60 minutes you archived
the output of *Note `INNODB_CMPMEM_RESET': innodb-cmpmem-table, it
would show the hourly statistics. If you never read *Note
`INNODB_CMPMEM_RESET': innodb-cmpmem-table.  and monitored the output of
*Note `INNODB_CMPMEM': innodb-cmpmem-table. instead, it would show the
cumulated statistics since InnoDB was started.

For the table definition, see *Note
innodb-information-schema-innodb_cmpmem_columns_table::.


File: manual.info,  Node: innodb-information-schema-examples-compression-sect,  Prev: innodb-information-schema-innodb_cmpmem,  Up: innodb-information-schema-compression-tables

14.4.6.4 Using the Compression Information Schema Tables
........................................................

The following is sample output from a database that contains compressed
tables (see *Note innodb-compression::, *Note `INNODB_CMP':
innodb-information-schema-innodb_cmp, and *Note `INNODB_CMPMEM':
innodb-information-schema-innodb_cmpmem.).

The following table shows the contents of
`INFORMATION_SCHEMA.INNODB_CMP' under a light workload. The only
compressed page size that the buffer pool contains is 8K.  Compressing
or uncompressing pages has consumed less than a second since the time
the statistics were reset, because the columns `COMPRESS_TIME' and
`UNCOMPRESS_TIME' are zero.

Sample data from the INFORMATION_SCHEMA.INNODB_CMP table, showing the
internal workings of InnoDB table compression under a light workload.

page size              compress ops                  compress ops ok                      compress time                        uncompress ops                       uncompress time
1024                   0                             0                                    0                                    0                                    0
2048                   0                             0                                    0                                    0                                    0
4096                   0                             0                                    0                                    0                                    0
8192                   1048                          921                                  0                                    61                                   0
16384                  0                             0                                    0                                    0                                    0

According to *Note `INNODB_CMPMEM':
innodb-information-schema-innodb_cmpmem, there are 6169 compressed 8KB
pages in the buffer pool.

The following table shows the contents of
`INFORMATION_SCHEMA.INNODB_CMPMEM' under a light workload. Some memory
is unusable due to fragmentation of the InnoDB memory allocator for
compressed pages: `SUM(PAGE_SIZE*PAGES_FREE)=6784'. This is because
small memory allocation requests are fulfilled by splitting bigger
blocks, starting from the 16K blocks that are allocated from the main
buffer pool, using the buddy allocation system. The fragmentation is
this low because some allocated blocks have been relocated (copied) to
form bigger adjacent free blocks. This copying of
`SUM(PAGE_SIZE*RELOCATION_OPS)' bytes has consumed less than a second
`(SUM(RELOCATION_TIME)=0)'.

Sample data from the INFORMATION_SCHEMA.INNODB_CMPMEM table, showing
buffer pool memory operations for InnoDB table compression under a light
workload.

page size              pages used                           pages free                           relocation ops                       relocation time
1024                   0                                    0                                    0                                    0
2048                   0                                    1                                    0                                    0
4096                   0                                    1                                    0                                    0
8192                   6169                                 0                                    5                                    0
16384                  0                                    0                                    0                                    0


File: manual.info,  Node: innodb-information-schema-transactions,  Next: innodb-information-schema-notes,  Prev: innodb-information-schema-compression-tables,  Up: innodb-information-schema

14.4.6.5 Information Schema Tables about Transactions
.....................................................

* Menu:

* innodb-information-schema-examples::  Using the Transaction Information Schema Tables

Three InnoDB-related Information Schema tables make it easy to monitor
transactions and diagnose possible locking problems. The three tables
are *Note `INNODB_TRX': innodb-trx-table, *Note `INNODB_LOCKS':
innodb-locks-table, and *Note `INNODB_LOCK_WAITS':
innodb-lock-waits-table.

   * `INNODB_TRX'

     Contains information about every transaction currently executing
     inside InnoDB, including whether the transaction is waiting for a
     lock, when the transaction started, and the particular SQL
     statement the transaction is executing.

     For the table definition, see *Note
     innodb-information-schema-innodb_trx_columns_table::.

   * `INNODB_LOCKS'

     Each transaction in InnoDB that is waiting for another transaction
     to release a lock (`INNODB_TRX.TRX_STATE='LOCK WAIT'') is blocked
     by exactly one `blocking lock request'.  That blocking lock
     request is for a row or table lock held by another transaction in
     an incompatible mode. The waiting or blocked transaction cannot
     proceed until the other transaction commits or rolls back, thereby
     releasing the requested lock.  For every blocked transaction,
     *Note `INNODB_LOCKS': innodb-locks-table. contains one row that
     describes each lock the transaction has requested, and for which
     it is waiting.  *Note `INNODB_LOCKS': innodb-locks-table. also
     contains one row for each lock that is blocking another
     transaction, whatever the state of the transaction that holds the
     lock (`'RUNNING'', `'LOCK WAIT'', `'ROLLING BACK'' or
     `'COMMITTING''). The lock that is blocking a transaction is always
     held in a mode (read vs. write, shared vs. exclusive) incompatible
     with the mode of requested lock.

     For the table definition, see *Note
     innodb-information-schema-innodb_locks_columns_table::.

   * `INNODB_LOCK_WAITS'

     Using this table, you can tell which transactions are waiting for
     a given lock, or for which lock a given transaction is waiting.
     This table contains one or more rows for each _blocked_
     transaction, indicating the lock it has requested and any locks
     that are blocking that request.  The `REQUESTED_LOCK_ID' refers to
     the lock that a transaction is requesting, and the
     `BLOCKING_LOCK_ID' refers to the lock (held by another
     transaction) that is preventing the first transaction from
     proceeding. For any given blocked transaction, all rows in *Note
     `INNODB_LOCK_WAITS': innodb-lock-waits-table. have the same value
     for `REQUESTED_LOCK_ID' and different values for
     `BLOCKING_LOCK_ID'.

     For the table definition, see *Note
     innodb-information-schema-innodb_lock_waits_columns_table::.


File: manual.info,  Node: innodb-information-schema-examples,  Prev: innodb-information-schema-transactions,  Up: innodb-information-schema-transactions

14.4.6.6 Using the Transaction Information Schema Tables
........................................................

It is sometimes helpful to be able to identify which transaction is
blocking another. You can use the Information Schema tables to find out
which transaction is waiting for another, and which resource is being
requested.

Suppose you have the following scenario, with three users running
concurrently. Each user (or session) corresponds to a MySQL thread, and
executes one transaction after another.  Consider the state of the
system when these users have issued the following commands, but none
has yet committed its transaction:

   * ` User A: '

          BEGIN;
          SELECT a FROM t FOR UPDATE;
          SELECT SLEEP(100);

   * ` User B: '

          SELECT b FROM t FOR UPDATE;

   * ` User C: '

          SELECT c FROM t FOR UPDATE;

In this scenario, you can use this query to see who is waiting for whom:

     SELECT r.trx_id waiting_trx_id,
            r.trx_mysql_thread_id waiting_thread,
            r.trx_query waiting_query,
            b.trx_id blocking_trx_id,
            b.trx_mysql_thread_id blocking_thread,
            b.trx_query blocking_query
        FROM       information_schema.innodb_lock_waits w
        INNER JOIN information_schema.innodb_trx b  ON
         b.trx_id = w.blocking_trx_id
       INNER JOIN information_schema.innodb_trx r  ON
         r.trx_id = w.requesting_trx_id;

This table represents the result set of a query against the
INFORMATION_SCHEMA.INNODB_LOCK_WAITS and INFORMATION_SCHEMA.INNODB_TRX
tables, shown in the preceding text, indicating which InnoDB threads
are waiting for which other threads.

waiting trx id                                             waiting thread                                             waiting query             blocking trx id                                                   blocking thread                                                   blocking query
`A4'                                                       `6'                                                        `SELECT b FROM t FOR      `A3'                                                              `5'                                                               `SELECT SLEEP(100)'
                                                                                                                      UPDATE'                                                                                                                                                       
`A5'                                                       `7'                                                        `SELECT c FROM t FOR      `A3'                                                              `5'                                                               `SELECT SLEEP(100)'
                                                                                                                      UPDATE'                                                                                                                                                       
`A5'                                                       `7'                                                        `SELECT c FROM t FOR      `A4'                                                              `6'                                                               `SELECT b FROM t FOR
                                                                                                                      UPDATE'                                                                                                                                                       UPDATE'

In the above result, you can identify users by the `waiting query' or
`blocking query'.  As you can see:

   * User B (trx id `'A4'', thread `6') and User C (trx id `'A5'',
     thread `7') are both waiting for User A (trx id `'A3'', thread
     `5').

   * User C is waiting for User B as well as User A.

You can see the underlying data in the tables `INNODB_TRX',
`INNODB_LOCKS', and `INNODB_LOCK_WAITS'.

The following table shows some sample contents of
INFORMATION_SCHEMA.INNODB_TRX.

Sample data from the INFORMATION_SCHEMA.INNODB_TRX table, showing the
typical types of entries for each column.

trx id  trx state trx started                trx requested lock id  trx wait started           trx weight     trx mysql thread  trx query
                                                                                                              id                
`A3'    `RUN­NING'`2008-01-15 16:44:54'      `NULL'                 `NULL'                     `2'            `5'               `SELECT SLEEP(100)'
`A4'    `LOCK     `2008-01-15 16:45:09'      `A4:1:3:2'             `2008-01-15 16:45:09'      `2'            `6'               `SELECT b FROM t FOR UPDATE'
        WAIT'                                                                                                                   
`A5'    `LOCK     `2008-01-15 16:45:14'      `A5:1:3:2'             `2008-01-15 16:45:14'      `2'            `7'               `SELECT c FROM t FOR UPDATE'
        WAIT'                                                                                                                   

The following table shows some sample contents of
`INFORMATION_SCHEMA.INNODB_LOCKS'.

Sample data from the INFORMATION_SCHEMA.INNODB_LOCKS table, showing the
typical types of entries for each column.

lock id             lock trx  lock mode  lock type       lock table             lock index            lock space lock page lock rec lock data
                    id                                                                                                              
`A3:1:3:2'          `A3'      `X'        `RECORD'        ``test`.`t`'           ``PRIMARY`'           `1'        `3'       `2'      `0x0200'
`A4:1:3:2'          `A4'      `X'        `RECORD'        ``test`.`t`'           ``PRIMARY`'           `1'        `3'       `2'      `0x0200'
`A5:1:3:2'          `A5'      `X'        `RECORD'        ``test`.`t`'           ``PRIMARY`'           `1'        `3'       `2'      `0x0200'

The following table shows some sample contents of
`INFORMATION_SCHEMA.INNODB_LOCK_WAITS'.

Sample data from the INFORMATION_SCHEMA.INNODB_LOCK_WAITS table,
showing the typical types of entries for each column.

requestingrequested   blockingblocking
trx id  lock id     trx id  lock id
`A4'    `A4:1:3:2'  `A3'    `A3:1:3:2'
`A5'    `A5:1:3:2'  `A3'    `A3:1:3:2'
`A5'    `A5:1:3:2'  `A4'    `A4:1:3:2'

Sometimes you would like to correlate the internal InnoDB locking
information with session-level information maintained by MySQL. For
example, you might like to know, for a given InnoDB transaction ID, the
corresponding MySQL session ID and name of the user that may be holding
a lock, and thus blocking another transaction.

The following output from the `INFORMATION_SCHEMA' tables is taken from
a somewhat loaded system.

As can be seen in the following tables, there are several transactions
running.

The following `INNODB_LOCKS' and `INNODB_LOCK_WAITS' tables shows that:

   * Transaction _`77F'_ (executing an `INSERT') is waiting for
     transactions _`77E'_, _`77D'_ and _`77B'_ to commit.

   * Transaction _`77E'_ (executing an INSERT) is waiting for
     transactions _`77D'_ and _`77B'_ to commit.

   * Transaction _`77D'_ (executing an INSERT) is waiting for
     transaction _`77B'_ to commit.

   * Transaction _`77B'_ (executing an INSERT) is waiting for
     transaction _`77A'_ to commit.

   * Transaction _`77A'_ is running, currently executing `SELECT'.

   * Transaction _`E56'_ (executing an `INSERT') is waiting for
     transaction _`E55'_ to commit.

   * Transaction _`E55'_ (executing an `INSERT') is waiting for
     transaction _`19C'_ to commit.

   * Transaction _`19C'_ is running, currently executing an `INSERT'.

Note that there may be an inconsistency between queries shown in the
two tables `INNODB_TRX.TRX_QUERY' and `PROCESSLIST.INFO'. The current
transaction ID for a thread, and the query being executed in that
transaction, may be different in these two tables for any given thread.
See *Note innodb-information-schema-note_inconsistency:: for an
explanation.

The following table shows the contents of
`INFORMATION_SCHEMA.PROCESSLIST' in a system running a heavy workload.

Sample data from the INFORMATION_SCHEMA.PROCESSLIST table, showing the
internal workings of MySQL processes under a heavy workload.

ID                                                         USER     HOST            DB      COMMAND        TIME    STATE          INFO
`384'                                                      `root'   `localhost'     `test'  `Query'        `10'    `update'       `insert into t2
                                                                                                                                  values ...'
`257'                                                      `root'   `localhost'     `test'  `Query'        `3'     `update'       `insert into t2
                                                                                                                                  values ...'
`130'                                                      `root'   `localhost'     `test'  `Query'        `0'     `update'       `insert into t2
                                                                                                                                  values ...'
`61'                                                       `root'   `localhost'     `test'  `Query'        `1'     `update'       `insert into t2
                                                                                                                                  values ...'
`8'                                                        `root'   `localhost'     `test'  `Query'        `1'     `update'       `insert into t2
                                                                                                                                  values ...'
`4'                                                        `root'   `localhost'     `test'  `Query'        `0'     `preparing'    `SELECT * FROM
                                                                                                                                  processlist'
`2'                                                        `root'   `localhost'     `test'  `Sleep'        `566'   `'             `NULL'

The following table shows the contents of
`INFORMATION_SCHEMA.INNODB_TRX' in a system running a heavy workload.

Sample data from the INFORMATION_SCHEMA.INNODB_TRX table, showing the
internal workings of InnoDB transactions under a heavy workload.

trx id                                                     trx     trx started    trx           trx wait       trx     trx       trx query
                                                           state                  requested     started        weight  mysql     
                                                                                  lock id                              thread id 
_`77F'_                                                    `LOCK   `2008-01-15    _`77F'_:806   `2008-01-15    `1'     `876'     `insert into t09 (D,
                                                           WAIT'   13:10:16'                    13:10:16'                        B, C) values ...'
_`77E'_                                                    `LOCK   `2008-01-15    _`77E'_:806   `2008-01-15    `1'     `875'     `insert into t09 (D,
                                                           WAIT'   13:10:16'                    13:10:16'                        B, C) values ...'
_`77D'_                                                    `LOCK   `2008-01-15    _`77D'_:806   `2008-01-15    `1'     `874'     `insert into t09 (D,
                                                           WAIT'   13:10:16'                    13:10:16'                        B, C) values ...'
_`77B'_                                                    `LOCK   `2008-01-15    _`77B'_:733​:12:1`2008-01-15    `4'     `873'     `insert into t09 (D,
                                                           WAIT'   13:10:16'                    13:10:16'                        B, C) values ...'
_`77A'_                                                    `RUN­NING'`2008-01-15    `NULL'        `NULL'         `4'     `872'     `select b, c from t09
                                                                   13:10:16'                                                     where ...'
_`E56'_                                                    `LOCK   `2008-01-15    _`E56'_:743​:6:2`2008-01-15    `5'     `384'     `insert into t2
                                                           WAIT'   13:10:06'                    13:10:06'                        values ...'
_`E55'_                                                    `LOCK   `2008-01-15    _`E55'_:743​:38:2`2008-01-15    `965'   `257'     `insert into t2
                                                           WAIT'   13:10:06'                    13:10:13'                        values ...'
_`19C'_                                                    `RUN­NING'`2008-01-15    `NULL'        `NULL'         `2900'  `130'     `insert into t2
                                                                   13:09:10'                                                     values ...'
_`E15'_                                                    `RUN­NING'`2008-01-15    `NULL'        `NULL'         `5395'  `61'      `insert into t2
                                                                   13:08:59'                                                     values ...'
_`51D'_                                                    `RUN­NING'`2008-01-15    `NULL'        `NULL'         `9807'  `8'       `insert into t2
                                                                   13:08:47'                                                     values ...'

The following table shows the contents of
`INFORMATION_SCHEMA.INNODB_LOCK_WAITS' in a system running a heavy
workload.

Sample data from the INFORMATION_SCHEMA.INNODB_LOCK_WAITS table,
showing the internal workings of InnoDB locking under a heavy workload.

requestingrequested      blockingblocking lock
trx id  lock id        trx id  id
_`77F'_ _`77F'_:806    _`77E'_ _`77E'_:806
_`77F'_ _`77F'_:806    _`77D'_ _`77D'_:806
_`77F'_ _`77F'_:806    _`77B'_ _`77B'_:806
_`77E'_ _`77E'_:806    _`77D'_ _`77D'_:806
_`77E'_ _`77E'_:806    _`77B'_ _`77B'_:806
_`77D'_ _`77D'_:806    _`77B'_ _`77B'_:806
_`77B'_ _`77B'_:733:12:1_`77A'_ _`77A'_:733:12:1
_`E56'_ _`E56'_:743:6:2_`E55'_ _`E55'_:743:6:2
_`E55'_ _`E55'_:743:38:2_`19C'_ _`19C'_:743:38:2

The following table shows the contents of
`INFORMATION_SCHEMA.INNODB_LOCKS' in a system running a heavy workload.

Sample data from the INFORMATION_SCHEMA.INNODB_LOCKS table, showing the
internal workings of InnoDB locking under a heavy workload.

lock id      lock trx id                                                       lock    lock type  lock table lock index     lock space                                                        lock page                                                         lock rec                                                          lock data
                                                                               mode                                                                                                                                                                                                                                               
_`77F'_:806  _`77F'_                                                           `AUTO​_INC'`TABLE'    ``test`​.`t09`'`NULL'         `NULL'                                                            `NULL'                                                            `NULL'                                                            `NULL'
_`77E'_:806  _`77E'_                                                           `AUTO​_INC'`TABLE'    ``test`​.`t09`'`NULL'         `NULL'                                                            `NULL'                                                            `NULL'                                                            `NULL'
_`77D'_:806  _`77D'_                                                           `AUTO​_INC'`TABLE'    ``test`​.`t09`'`NULL'         `NULL'                                                            `NULL'                                                            `NULL'                                                            `NULL'
_`77B'_:806  _`77B'_                                                           `AUTO​_INC'`TABLE'    ``test`​.`t09`'`NULL'         `NULL'                                                            `NULL'                                                            `NULL'                                                            `NULL'
_`77B'_:733​:12:1_`77B'_                                                           `X'     `RECORD'   ``test`​.`t09`'``PRIMARY`'    `733'                                                             `12'                                                              `1'                                                               `supremum
                                                                                                                                                                                                                                                                                                                                  pseudo-record'
_`77A'_:733​:12:1_`77A'_                                                           `X'     `RECORD'   ``test`​.`t09`'``PRIMARY`'    `733'                                                             `12'                                                              `1'                                                               `supremum
                                                                                                                                                                                                                                                                                                                                  pseudo-record'
_`E56'_:743​:6:2_`E56'_                                                           `S'     `RECORD'   ``test`​.`t2`'``PRIMARY`'    `743'                                                             `6'                                                               `2'                                                               `0, 0'
_`E55'_:743​:6:2_`E55'_                                                           `X'     `RECORD'   ``test`​.`t2`'``PRIMARY`'    `743'                                                             `6'                                                               `2'                                                               `0, 0'
_`E55'_:743​:38:2_`E55'_                                                           `S'     `RECORD'   ``test`​.`t2`'``PRIMARY`'    `743'                                                             `38'                                                              `2'                                                               `1922, 1922'
_`19C'_:743​:38:2_`19C'_                                                           `X'     `RECORD'   ``test`​.`t2`'``PRIMARY`'    `743'                                                             `38'                                                              `2'                                                               `1922, 1922'


File: manual.info,  Node: innodb-information-schema-notes,  Prev: innodb-information-schema-transactions,  Up: innodb-information-schema

14.4.6.7 Special Locking Considerations for InnoDB `INFORMATION_SCHEMA' Tables
..............................................................................

* Menu:

* innodb-information-schema-understanding_innodb_locking::  Understanding `InnoDB' Locking
* innodb-information-schema-rapidly_changing_internal_data::  Granularity of `INFORMATION_SCHEMA' Data
* innodb-information-schema-note_inconsistency::  Possible Inconsistency with `PROCESSLIST'


File: manual.info,  Node: innodb-information-schema-understanding_innodb_locking,  Next: innodb-information-schema-rapidly_changing_internal_data,  Prev: innodb-information-schema-notes,  Up: innodb-information-schema-notes

14.4.6.8 Understanding `InnoDB' Locking
.......................................

When a transaction updates a row in a table, or locks it with `SELECT
FOR UPDATE', InnoDB establishes a list or queue of locks on that row.
Similarly, InnoDB maintains a list of locks on a table for table-level
locks transactions hold. If a second transaction wants to update a row
or lock a table already locked by a prior transaction in an incompatible
mode, InnoDB adds a lock request for the row to the corresponding
queue. For a lock to be acquired by a transaction, all incompatible
lock requests previously entered into the lock queue for that row or
table must be removed (the transactions holding or requesting those
locks either commit or roll back).

A transaction may have any number of lock requests for different rows
or tables. At any given time, a transaction may be requesting a lock
that is held by another transaction, in which case it is blocked by
that other transaction. The requesting transaction must wait for the
transaction that holds the blocking lock to commit or rollback. If a
transaction is not waiting for a a lock, it is in the `'RUNNING''
state. If a transaction is waiting for a lock, it is in the `'LOCK
WAIT'' state.

The *Note `INNODB_LOCKS': innodb-locks-table. table holds one or more
row for each `'LOCK WAIT'' transaction, indicating any lock requests
that are preventing its progress.  This table also contains one row
describing each lock in a queue of locks pending for a given row or
table. The *Note `INNODB_LOCK_WAITS': innodb-lock-waits-table. table
shows which locks already held by a transaction are blocking locks
requested by other transactions.


File: manual.info,  Node: innodb-information-schema-rapidly_changing_internal_data,  Next: innodb-information-schema-note_inconsistency,  Prev: innodb-information-schema-understanding_innodb_locking,  Up: innodb-information-schema-notes

14.4.6.9 Granularity of `INFORMATION_SCHEMA' Data
.................................................

The data exposed by the transaction and locking tables represent a
glimpse into fast-changing data. This is not like other (user) tables,
where the data changes only when application-initiated updates occur.
The underlying data is internal system-managed data, and can change
very quickly.

For performance reasons, and to minimize the chance of misleading
`JOIN's between the `INFORMATION_SCHEMA' tables, InnoDB collects the
required transaction and locking information into an intermediate
buffer whenever a `SELECT' on any of the tables is issued. This buffer
is refreshed only if more than 0.1 seconds has elapsed since the last
time the buffer was read. The data needed to fill the three tables is
fetched atomically and consistently and is saved in this global internal
buffer, forming a point-in-time `snapshot'. If multiple table accesses
occur within 0.1 seconds (as they almost certainly do when MySQL
processes a join among these tables), then the same snapshot is used to
satisfy the query.

A correct result is returned when you `JOIN' any of these tables
together in a single query, because the data for the three tables comes
from the same snapshot. Because the buffer is not refreshed with every
query of any of these tables, if you issue separate queries against
these tables within a tenth of a second, the results are the same from
query to query.  On the other hand, two separate queries of the same or
different tables issued more than a tenth of a second apart may see
different results, since the data come from different snapshots.

Because InnoDB must temporarily stall while the transaction and locking
data is collected, too frequent queries of these tables can negatively
impact performance as seen by other users.

As these tables contain sensitive information (at least
`INNODB_LOCKS.LOCK_DATA' and `INNODB_TRX.TRX_QUERY'), for security
reasons, only the users with the `PROCESS' privilege are allowed to
`SELECT' from them.


File: manual.info,  Node: innodb-information-schema-note_inconsistency,  Prev: innodb-information-schema-rapidly_changing_internal_data,  Up: innodb-information-schema-notes

14.4.6.10 Possible Inconsistency with `PROCESSLIST'
...................................................

As just described, while the transaction and locking data is correct
and consistent when these `INFORMATION_SCHEMA' tables are populated. For
example, the query in *Note `INNODB_TRX': innodb-trx-table. is always
consistent with the rest of *Note `INNODB_TRX': innodb-trx-table, *Note
`INNODB_LOCKS': innodb-locks-table. and *Note `INNODB_LOCK_WAITS':
innodb-lock-waits-table. when the data comes from the same snapshot.
However, the underlying data changes so fast that similar glimpses at
other, similarly fast-changing data, may not be in synchrony. Thus, you
should be careful in comparing the data in the InnoDB transaction and
locking tables with that in the *Note `PROCESSLIST': processlist-table.
table. The data from the *Note `PROCESSLIST': processlist-table. table
does not come from the same snapshot as the data about locking and
transactions. Even if you issue a single `SELECT' (joining *Note
`INNODB_TRX': innodb-trx-table. and *Note `PROCESSLIST':
processlist-table, for example), the content of those tables is
generally not consistent.  *Note `INNODB_TRX': innodb-trx-table. may
reference rows that are not present in *Note `PROCESSLIST':
processlist-table. or the currently executing SQL query of a
transaction, shown in `INNODB_TRX.TRX_QUERY' may differ from the one in
`PROCESSLIST.INFO'.


File: manual.info,  Node: innodb-performance,  Next: innodb-other-changes,  Prev: innodb-information-schema,  Up: innodb-5-5

14.4.7 `InnoDB' Performance and Scalability Enhancements
--------------------------------------------------------

* Menu:

* innodb-performance-overview::  Overview of InnoDB Performance
* innodb-performance-latching::  Faster Locking for Improved Scalability
* innodb-performance-use_sys_malloc::  Using Operating System Memory Allocators
* innodb-performance-change_buffering::  Controlling InnoDB Change Buffering
* innodb-performance-adaptive_hash_index::  Controlling Adaptive Hash Indexing
* innodb-performance-thread_concurrency::  Changes Regarding Thread Concurrency
* innodb-performance-read_ahead::  Changes in the Read-Ahead Algorithm
* innodb-performance-multiple_io_threads::  Multiple Background I/O Threads
* innodb-performance-aio-linux::  Asynchronous I/O on Linux
* innodb-performance-group_commit::  Group Commit
* innodb-performance-thread_io_rate::  Controlling the Master Thread I/O Rate
* innodb-performance-adaptive_flushing::  Controlling the Flushing Rate of Dirty Pages
* innodb-performance-pause_instruction::  Using the PAUSE Instruction in InnoDB Spin Loops
* innodb-performance-spin_lock_polling::  Control of Spin Lock Polling
* innodb-performance-midpoint_insertion::  Making the Buffer Pool Scan Resistant
* innodb-performance-recovery::  Improvements to Crash Recovery Performance
* innodb-performance-schema::    Integration with the MySQL Performance Schema
* innodb-multiple-buffer-pools::  Improvements to Performance from Multiple Buffer Pools
* innodb-multiple-rollback-segments::  Better Scalability with Multiple Rollback Segments
* innodb-improved-purge-scheduling::  Better Scalability with Improved Purge Scheduling
* innodb-improved-log-sys-mutex::  Improved Log Sys Mutex
* innodb-separate-flush-list-mutex::  Separate Flush List Mutex

This section discusses recent InnoDB enhancements to performance and
scalability, covering the performance features in InnoDB 1.1 with MySQL
5.5, and the features in the InnoDB Plugin for MySQL 5.1. This
information is useful to any DBA or developer who is concerned with
performance and scalability. Although some of the enhancements do not
require any action on your part, knowing this information can still
help you diagnose performance issues more quickly and modernize systems
and applications that rely on older, inefficient behavior.


File: manual.info,  Node: innodb-performance-overview,  Next: innodb-performance-latching,  Prev: innodb-performance,  Up: innodb-performance

14.4.7.1 Overview of InnoDB Performance
.......................................

InnoDB has always been highly efficient, and includes several unique
architectural elements to assure high performance and scalability. The
latest InnoDB storage engine includes new features that take advantage
of advances in operating systems and hardware platforms, such as
multi-core processors and improved memory allocation systems. In
addition, new configuration options let you better control some InnoDB
internal subsystems to achieve the best performance with your workload.

Starting with MySQL 5.5 and InnoDB 1.1, the built-in InnoDB storage
engine within MySQL is upgraded to the full feature set and performance
of the former InnoDB Plugin. This change makes these performance and
scalability enhancements available to a much wider audience than
before, and eliminates the separate installation step of the InnoDB
Plugin. After learning about the InnoDB performance features in this
section, continue with *Note optimization:: to learn the best practices
for overall MySQL performance, and *Note optimizing-innodb:: in
particular for InnoDB tips and guidelines.


File: manual.info,  Node: innodb-performance-latching,  Next: innodb-performance-use_sys_malloc,  Prev: innodb-performance-overview,  Up: innodb-performance

14.4.7.2 Faster Locking for Improved Scalability
................................................

In MySQL and InnoDB, multiple threads of execution access shared data
structures. InnoDB synchronizes these accesses with its own
implementation of mutexes and read/write locks. InnoDB has historically
protected the internal state of a read/write lock with an InnoDB mutex.
On Unix and Linux platforms, the internal state of an InnoDB mutex is
protected by a Pthreads mutex, as in IEEE Std 1003.1c (POSIX.1c).

On many platforms, there is a more efficient way to implement mutexes
and read/write locks.  Atomic operations can often be used to
synchronize the actions of multiple threads more efficiently than
Pthreads. Each operation to acquire or release a lock can be done in
fewer CPU instructions, and thus result in less wasted time when
threads are contending for access to shared data structures. This in
turn means greater scalability on multi-core platforms.

InnoDB implements mutexes and read/write locks with the built-in
functions provided by the GNU Compiler Collection (GCC) for atomic
memory access
(http://gcc.gnu.org/onlinedocs/gcc-4.1.2/gcc/Atomic-Builtins.html)
instead of using the Pthreads approach previously used. More
specifically, an InnoDB that is compiled with GCC version 4.1.2 or
later uses the atomic builtins instead of a `pthread_mutex_t' to
implement InnoDB mutexes and read/write locks.

On 32-bit Microsoft Windows, InnoDB has implemented mutexes (but not
read/write locks) with hand-written assembler instructions.  Beginning
with Microsoft Windows 2000, functions for Interlocked Variable Access
(http://msdn.microsoft.com/en-us/library/ms684122(VS.85).aspx) are
available that are similar to the built-in functions provided by GCC.
On Windows 2000 and higher, InnoDB makes use of the Interlocked
functions. Unlike the old hand-written assembler code, the new
implementation supports read/write locks and 64-bit platforms.

Solaris 10 introduced library functions for atomic operations, and
InnoDB uses these functions by default. When MySQL is compiled on
Solaris 10 with a compiler that does not support the built-in functions
provided by the GNU Compiler Collection (GCC) for atomic memory access
(http://gcc.gnu.org/onlinedocs/gcc-4.1.2/gcc/Atomic-Builtins.html),
InnoDB uses the library functions.

This change improves the scalability of InnoDB on multi-core systems.
This feature is enabled out-of-the-box on the platforms where it is
supported. You do not have to set any parameter or option to take
advantage of the improved performance. On platforms where the GCC,
Windows, or Solaris functions for atomic memory access are not
available, InnoDB uses the traditional Pthreads method of implementing
mutexes and read/write locks.

When MySQL starts, InnoDB writes a message to the log file indicating
whether atomic memory access is used for mutexes, for mutexes and
read/write locks, or neither. If suitable tools are used to build
InnoDB and the target CPU supports the atomic operations required,
InnoDB uses the built-in functions for mutexing. If, in addition, the
compare-and-swap operation can be used on thread identifiers
(`pthread_t'), then InnoDB uses the instructions for read-write locks
as well.

Note: If you are building from source, ensure that the build process
properly takes advantage of your platform capabilities.

For more information about the performance implications of locking, see
*Note locking-issues::.


File: manual.info,  Node: innodb-performance-use_sys_malloc,  Next: innodb-performance-change_buffering,  Prev: innodb-performance-latching,  Up: innodb-performance

14.4.7.3 Using Operating System Memory Allocators
.................................................

When InnoDB was developed, the memory allocators supplied with
operating systems and run-time libraries were often lacking in
performance and scalability. At that time, there were no memory
allocator libraries tuned for multi-core CPUs. Therefore, InnoDB
implemented its own memory allocator in the `mem' subsystem. This
allocator is guarded by a single mutex, which may become a bottleneck.
InnoDB also implements a wrapper interface around the system allocator
(`malloc' and `free') that is likewise guarded by a single mutex.

Today, as multi-core systems have become more widely available, and as
operating systems have matured, significant improvements have been made
in the memory allocators provided with operating systems. New memory
allocators perform better and are more scalable than they were in the
past. The leading high-performance memory allocators include `Hoard',
`libumem', `mtmalloc', `ptmalloc', `tbbmalloc', and `TCMalloc'. Most
workloads, especially those where memory is frequently allocated and
released (such as multi-table joins), benefit from using a more highly
tuned memory allocator as opposed to the internal, InnoDB-specific
memory allocator.

You can control whether InnoDB uses its own memory allocator or an
allocator of the operating system, by setting the value of the system
configuration parameter `innodb_use_sys_malloc' in the MySQL option
file (`my.cnf' or `my.ini'). If set to `ON' or `1' (the default),
InnoDB uses the `malloc' and `free' functions of the underlying system
rather than manage memory pools itself. This parameter is not dynamic,
and takes effect only when the system is started. To continue to use
the InnoDB memory allocator, set `innodb_use_sys_malloc' to `0'.

*Note*:

When the InnoDB memory allocator is disabled, InnoDB ignores the value
of the parameter `innodb_additional_mem_pool_size'.  The InnoDB memory
allocator uses an additional memory pool for satisfying allocation
requests without having to fall back to the system memory allocator.
When the InnoDB memory allocator is disabled, all such allocation
requests are fulfilled by the system memory allocator.

On Unix-like systems that use dynamic linking, replacing the memory
allocator may be as easy as making the environment variable
`LD_PRELOAD' or `LD_LIBRARY_PATH' point to the dynamic library that
implements the allocator. On other systems, some relinking may be
necessary. Please refer to the documentation of the memory allocator
library of your choice.

Since InnoDB cannot track all memory use when the system memory
allocator is used (`innodb_use_sys_malloc' is `ON'), the section
`BUFFER POOL AND MEMORY' in the output of the `SHOW ENGINE INNODB
STATUS' command only includes the buffer pool statistics in the `Total
memory allocated'. Any memory allocated using the `mem' subsystem or
using `ut_malloc' is excluded.

For more information about the performance implications of InnoDB
memory usage, see *Note buffering-caching::.


File: manual.info,  Node: innodb-performance-change_buffering,  Next: innodb-performance-adaptive_hash_index,  Prev: innodb-performance-use_sys_malloc,  Up: innodb-performance

14.4.7.4 Controlling InnoDB Change Buffering
............................................

When `INSERT', `UPDATE', and `DELETE' operations are done to a table,
often the values of indexed columns (particularly the values of
secondary keys) are not in sorted order, requiring substantial I/O to
bring secondary indexes up to date. InnoDB has an insert buffer that
caches changes to secondary index entries when the relevant page is not
in the buffer pool, thus avoiding I/O operations by not reading in the
page from the disk. The buffered changes are merged when the page is
loaded to the buffer pool, and the updated page is later flushed to
disk using the normal mechanism. The InnoDB main thread merges buffered
changes when the server is nearly idle, and during a slow shutdown.

Because it can result in fewer disk reads and writes, this feature is
most valuable for workloads that are I/O-bound, for example
applications with a high volume of DML operations such as bulk inserts.

However, the insert buffer occupies a part of the buffer pool, reducing
the memory available to cache data pages. If the working set almost
fits in the buffer pool, or if your tables have relatively few
secondary indexes, it may be useful to disable insert buffering. If the
working set entirely fits in the buffer pool, insert buffering does not
impose any extra overhead, because it only applies to pages that are
not in the buffer pool.

You can control the extent to which InnoDB performs insert buffering
with the system configuration parameter `innodb_change_buffering'. You
can turn on and off buffering for inserts, delete operations (when
index records are initially marked for deletion) and purge operations
(when index records are physically deleted). An update operation is
represented as a combination of an insert and a delete. In MySQL 5.5
and higher, the default value is changed from `inserts' to `all'.

The allowed values of `innodb_change_buffering' are:

   * *`all'*

     The default value: buffer inserts, delete-marking operations, and
     purges.

   * *`none'*

     Do not buffer any operations.

   * *`inserts'*

     Buffer insert operations.

   * *`deletes'*

     Buffer delete-marking operations.

   * *`changes'*

     Buffer both inserts and delete-marking.

   * *`purges'*

     Buffer the physical deletion operations that happen in the
     background.

You can set the value of this parameter in the MySQL option file
(`my.cnf' or `my.ini') or change it dynamically with the `SET GLOBAL'
command, which requires the `SUPER' privilege. Changing the setting
affects the buffering of new operations; the merging of already
buffered entries is not affected.

For more information about speeding up `INSERT', `UPDATE', and `DELETE'
statements, see *Note non-select-optimization::.


File: manual.info,  Node: innodb-performance-adaptive_hash_index,  Next: innodb-performance-thread_concurrency,  Prev: innodb-performance-change_buffering,  Up: innodb-performance

14.4.7.5 Controlling Adaptive Hash Indexing
...........................................

If a table fits almost entirely in main memory, the fastest way to
perform queries on it is to use hash indexes rather than B-tree
lookups. MySQL monitors searches on each index defined for an InnoDB
table. If it notices that certain index values are being accessed
frequently, it automatically builds an in-memory hash table for that
index. See *Note innodb-adaptive-hash:: for background information and
usage guidelines for the adaptive hash index feature and the
`innodb_adaptive_hash_index' configuration option.


File: manual.info,  Node: innodb-performance-thread_concurrency,  Next: innodb-performance-read_ahead,  Prev: innodb-performance-adaptive_hash_index,  Up: innodb-performance

14.4.7.6 Changes Regarding Thread Concurrency
.............................................

InnoDB uses operating system threads to process requests from user
transactions. (Transactions may issue many requests to InnoDB before
they commit or roll back.) On modern operating systems and servers with
multi-core processors, where context switching is efficient, most
workloads run well without any limit on the number of concurrent
threads. Scalability improvements in MySQL 5.5 and up reduce the need
to limit the number of concurrently executing threads inside InnoDB.

In situations where it is helpful to minimize context switching between
threads, InnoDB can use a number of techniques to limit the number of
concurrently executing operating system threads (and thus the number of
requests that are processed at any one time).  When InnoDB receives a
new request from a user session, if the number of threads concurrently
executing is at a pre-defined limit, the new request sleeps for a short
time before it tries again. A request that cannot be rescheduled after
the sleep is put in a first-in/first-out queue and eventually is
processed. Threads waiting for locks are not counted in the number of
concurrently executing threads.

You can limit the number of concurrent threads by setting the
configuration parameter `innodb_thread_concurrency'.  Once the number
of executing threads reaches this limit, additional threads sleep for a
number of microseconds, set by the configuration parameter
`innodb_thread_sleep_delay', before being placed into the queue.

The default value for `innodb_thread_concurrency' and the implied
default limit on the number of concurrent threads has been changed in
various releases of MySQL and InnoDB.  Currently, the default value of
`innodb_thread_concurrency' is `0', so that by default there is no
limit on the number of concurrently executing threads, as shown in
*Note innodb-thread-concurrency-table::.

*Changes to `innodb_thread_concurrency'*

InnoDB Version                              MySQL Version                        Default value  Default limit of concurrent   Value to allow unlimited
                                                                                                threads                       threads
Built-in                                    Earlier than 5.1.11                  20             No limit                      20 or higher
Built-in                                    5.1.11 and newer                     8              8                             0
InnoDB before 1.0.3                         (corresponding to Plugin)            8              8                             0
InnoDB 1.0.3 and newer                      (corresponding to Plugin)            0              No limit                      0

Note that InnoDB causes threads to sleep only when the number of
concurrent threads is limited. When there is no limit on the number of
threads, all contend equally to be scheduled. That is, if
`innodb_thread_concurrency' is `0', the value of
`innodb_thread_sleep_delay' is ignored.

When there is a limit on the number of threads, InnoDB reduces context
switching overhead by permitting multiple requests made during the
execution of a single SQL statement to enter InnoDB without observing
the limit set by `innodb_thread_concurrency'.  Since an SQL statement
(such as a join) may comprise multiple row operations within InnoDB,
InnoDB assigns `tickets' that allow a thread to be scheduled repeatedly
with minimal overhead.

When a new SQL statement starts, a thread has no tickets, and it must
observe `innodb_thread_concurrency'.  Once the thread is entitled to
enter InnoDB, it is assigned a number of tickets that it can use for
subsequently entering InnoDB. If the tickets run out,
`innodb_thread_concurrency' is observed again and further tickets are
assigned. The number of tickets to assign is specified by the global
option `innodb_concurrency_tickets', which is 500 by default. A thread
that is waiting for a lock is given one ticket once the lock becomes
available.

The correct values of these variables depend on your environment and
workload. Try a range of different values to determine what value works
for your applications. Before limiting the number of concurrently
executing threads, review configuration options that may improve the
performance of InnoDB on multi-core and multi-processor computers, such
as *Note innodb_use_sys_malloc: innodb-performance-use_sys_malloc.  and
*Note innodb_adaptive_hash_index:
innodb-performance-adaptive_hash_index.

For general performance information about MySQL thread handling, see
*Note connection-threads::.


File: manual.info,  Node: innodb-performance-read_ahead,  Next: innodb-performance-multiple_io_threads,  Prev: innodb-performance-thread_concurrency,  Up: innodb-performance

14.4.7.7 Changes in the Read-Ahead Algorithm
............................................

A read-ahead request is an I/O request to prefetch multiple pages in the
buffer pool asynchronously, in anticipation that these pages will be
needed soon. InnoDB uses or has used two read-ahead algorithms to
improve I/O performance:

_Linear_ read-ahead is based on the access pattern of the pages in the
buffer pool, not just their number. You can control when InnoDB
performs a read-ahead operation by adjusting the number of sequential
page accesses required to trigger an asynchronous read request, using
the configuration parameter `innodb_read_ahead_threshold'.  Before this
parameter was added, InnoDB would only calculate whether to issue an
asynchronous prefetch request for the entire next extent when it read
in the last page of the current extent.

_Random_ read-ahead is a technique that predicts when pages might be
needed soon based on pages already in the buffer pool, regardless of
the order in which those pages were read. If 13 consecutive pages from
the same extent are found in the buffer pool, InnoDB asynchronously
issues a request to prefetch the remaining pages of the extent. This
feature was initially turned off in MySQL 5.5. It is available once
again starting in MySQL 5.1.59 and 5.5.16 and higher, turned off by
default. To enable this feature, set the configuration variable
`innodb_random_read_ahead'.

If the number of pages read from an extent of 64 pages is greater or
equal to `innodb_read_ahead_threshold', InnoDB initiates an
asynchronous read-ahead operation of the entire following extent. Thus,
this parameter controls how sensitive InnoDB is to the pattern of page
accesses within an extent in deciding whether to read the following
extent asynchronously. The higher the value, the more strict the access
pattern check. For example, if you set the value to 48, InnoDB triggers
a linear read-ahead request only when 48 pages in the current extent
have been accessed sequentially. If the value is 8, InnoDB would
trigger an asynchronous read-ahead even if as few as 8 pages in the
extent were accessed sequentially.

The new configuration parameter `innodb_read_ahead_threshold' can be
set to any value from 0-64. The default value is 56, meaning that an
asynchronous read-ahead is performed only when 56 of the 64 pages in
the extent are accessed sequentially. You can set the value of this
parameter in the MySQL option file (my.cnf or my.ini), or change it
dynamically with the `SET GLOBAL' command, which requires the `SUPER'
privilege.

The `SHOW ENGINE INNODB STATUS' command displays statistics to help you
evaluate the effectiveness of the read-ahead algorithm. See *Note
innodb-other-changes-readahead-counters:: for more information.

For more information about I/O performance, see *Note
optimizing-innodb-diskio:: and *Note disk-issues::.


File: manual.info,  Node: innodb-performance-multiple_io_threads,  Next: innodb-performance-aio-linux,  Prev: innodb-performance-read_ahead,  Up: innodb-performance

14.4.7.8 Multiple Background I/O Threads
........................................

InnoDB uses background threads to service various types of I/O
requests. You can configure the number of background threads that
service read and write I/O on data pages, using the configuration
parameters `innodb_read_io_threads' and `innodb_write_io_threads'. These
parameters signify the number of background threads used for read and
write requests respectively. They are effective on all supported
platforms. You can set the value of these parameters in the MySQL
option file (`my.cnf' or `my.ini'); you cannot change them dynamically.
The default value for these parameters is `4' and the permissible
values range from `1-64'.

These parameters replace `innodb_file_io_threads'
(http://dev.mysql.com/doc/refman/5.1/en/innodb-parameters.html#sysvar_innodb_file_io_threads)
from earlier versions of MySQL. If you try to set a value for this
obsolete parameter, a warning is written to the log file and the value
is ignored. This parameter only applied to Windows platforms. (On
non-Windows platforms, there was only one thread each for read and
write.)

The purpose of this change is to make InnoDB more scalable on high end
systems. Each background thread can handle up to 256 pending I/O
requests. A major source of background I/O is the read-ahead requests.
InnoDB tries to balance the load of incoming requests in such way that
most of the background threads share work equally. InnoDB also attempts
to allocate read requests from the same extent to the same thread to
increase the chances of coalescing the requests together. If you have a
high end I/O subsystem and you see more than 64 x
`innodb_read_io_threads' pending read requests in `SHOW ENGINE INNODB
STATUS', you might gain by increasing the value of
`innodb_read_io_threads'.

For more information about InnoDB I/O performance, see *Note
optimizing-innodb-diskio::.


File: manual.info,  Node: innodb-performance-aio-linux,  Next: innodb-performance-group_commit,  Prev: innodb-performance-multiple_io_threads,  Up: innodb-performance

14.4.7.9 Asynchronous I/O on Linux
..................................

Starting in InnoDB 1.1 with MySQL 5.5, the asynchronous I/O capability
that InnoDB has had on Windows systems is now available on Linux
systems. (Other Unix-like systems continue to use synchronous I/O
calls.) This feature improves the scalability of heavily I/O-bound
systems, which typically show many pending reads/writes in the output
of the command `SHOW ENGINE INNODB STATUS\G'.

Running with a large number of `InnoDB' I/O threads, and especially
running multiple such instances on the same server machine, can exceed
capacity limits on Linux systems.  In this case, you can fix the error:

     EAGAIN: The specified maxevents exceeds the user's limit of available events.

by writing a higher limit to `/proc/sys/fs/aio-max-nr'.

In general, if a problem with the asynchronous I/O subsystem in the OS
prevents InnoDB from starting, set the option `innodb_use_native_aio=0'
in the configuration file. This new configuration option applies to
Linux systems only, and cannot be changed once the server is running.

For more information about InnoDB I/O performance, see *Note
optimizing-innodb-diskio::.


File: manual.info,  Node: innodb-performance-group_commit,  Next: innodb-performance-thread_io_rate,  Prev: innodb-performance-aio-linux,  Up: innodb-performance

14.4.7.10 Group Commit
......................

InnoDB, like any other ACID-compliant database engine, flushes the redo
log of a transaction before it is committed. Historically, InnoDB used
group commit functionality to group multiple such flush requests
together to avoid one flush for each commit. With group commit, InnoDB
issues a single write to the log file to perform the commit action for
multiple user transactions that commit at about the same time,
significantly improving throughput.

Group commit in InnoDB worked until MySQL 4.x, and works once again
with MySQL 5.1 with the InnoDB Plugin, and MySQL 5.5 and higher. The
introduction of support for the distributed transactions and Two Phase
Commit (2PC) in MySQL 5.0 interfered with the InnoDB group commit
functionality. This issue is now resolved.

The group commit functionality inside InnoDB works with the Two Phase
Commit protocol in MySQL. Re-enabling of the group commit functionality
fully ensures that the ordering of commit in the MySQL binlog and the
InnoDB logfile is the same as it was before.  It means it is _totally
safe to use MySQL Enterprise Backup with InnoDB 1.0.4_ (that is, the
InnoDB Plugin with MySQL 5.1) and above. When the binlog is enabled,
you typically also set the configuration option `sync_binlog=0',
because group commit for the binary log is only supported if it is set
to 0.

Group commit is transparent; you do not need to do anything to take
advantage of this significant performance improvement.

For more information about performance of `COMMIT' and other
transactional operations, see *Note
optimizing-innodb-transaction-management::.


File: manual.info,  Node: innodb-performance-thread_io_rate,  Next: innodb-performance-adaptive_flushing,  Prev: innodb-performance-group_commit,  Up: innodb-performance

14.4.7.11 Controlling the Master Thread I/O Rate
................................................

The master thread in InnoDB is a thread that performs various tasks in
the background.  Most of these tasks are I/O related, such as flushing
dirty pages from the buffer pool or writing changes from the insert
buffer to the appropriate secondary indexes. The master thread attempts
to perform these tasks in a way that does not adversely affect the
normal working of the server. It tries to estimate the free I/O
bandwidth available and tune its activities to take advantage of this
free capacity. Historically, InnoDB has used a hard coded value of 100
IOPs (input/output operations per second) as the total I/O capacity of
the server.

The parameter `innodb_io_capacity' indicates the overall I/O capacity
available to InnoDB. This parameter should be set to approximately the
number of I/O operations that the system can perform per second. The
value depends on your system configuration. When `innodb_io_capacity'
is set, the master threads estimates the I/O bandwidth available for
background tasks based on the set value. Setting the value to `100'
reverts to the old behavior.

You can set the value of `innodb_io_capacity' to any number 100 or
greater. The default value is `200', reflecting that the performance of
typical modern I/O devices is higher than in the early days of MySQL.
Typically, values around the previous default of 100 are appropriate
for consumer-level storage devices, such as hard drives up to 7200
RPMs. Faster hard drives, RAID configurations, and SSDs benefit from
higher values.

You can set the value of this parameter in the MySQL option file
(`my.cnf' or `my.ini') or change it dynamically with the `SET GLOBAL'
command, which requires the `SUPER' privilege.

For more information about InnoDB I/O performance, see *Note
optimizing-innodb-diskio::.


File: manual.info,  Node: innodb-performance-adaptive_flushing,  Next: innodb-performance-pause_instruction,  Prev: innodb-performance-thread_io_rate,  Up: innodb-performance

14.4.7.12 Controlling the Flushing Rate of Dirty Pages
......................................................

InnoDB performs certain tasks in the background, including flushing of
dirty pages (those pages that have been changed but are not yet written
to the database files) from the buffer pool, a task performed by the
master thread.  Currently, InnoDB aggressively flushes buffer pool
pages if the percentage of dirty pages in the buffer pool exceeds
`innodb_max_dirty_pages_pct'.

InnoDB uses a new algorithm to estimate the required rate of flushing,
based on the speed of redo log generation and the current rate of
flushing. The intent is to smooth overall performance by ensuring that
buffer flush activity keeps up with the need to keep the buffer pool
`clean'.  Automatically adjusting the rate of flushing can help to avoid
steep dips in throughput, when excessive buffer pool flushing limits
the I/O capacity available for ordinary read and write activity.

InnoDB uses its log files in a circular fashion. Before reusing a
portion of a log file, InnoDB flushes to disk all dirty buffer pool
pages whose redo entries are contained in that portion of the log file,
a process known as a sharp checkpoint. If a workload is
write-intensive, it generates a lot of redo information, all written to
the log file. If all available space in the log files is used up, a
sharp checkpoint occurs, causing a temporary reduction in throughput.
This situation can happen even though `innodb_max_dirty_pages_pct' is
not reached.

InnoDB uses a heuristic-based algorithm to avoid such a scenario, by
measuring the number of dirty pages in the buffer pool and the rate at
which redo is being generated. Based on these numbers, InnoDB decides
how many dirty pages to flush from the buffer pool each second. This
self-adapting algorithm is able to deal with sudden changes in the
workload.

Internal benchmarking has also shown that this algorithm not only
maintains throughput over time, but can also improve overall throughput
significantly.

Because adaptive flushing is a new feature that can significantly
affect the I/O pattern of a workload, a new configuration parameter
lets you turn off this feature. The default value of the boolean
parameter `innodb_adaptive_flushing' is `TRUE', enabling the new
algorithm. You can set the value of this parameter in the MySQL option
file (`my.cnf' or `my.ini') or change it dynamically with the `SET
GLOBAL' command, which requires the `SUPER' privilege.

For more information about InnoDB I/O performance, see *Note
optimizing-innodb-diskio::.


File: manual.info,  Node: innodb-performance-pause_instruction,  Next: innodb-performance-spin_lock_polling,  Prev: innodb-performance-adaptive_flushing,  Up: innodb-performance

14.4.7.13 Using the PAUSE Instruction in InnoDB Spin Loops
..........................................................

Synchronization inside InnoDB frequently involves the use of spin
loops: while waiting, InnoDB executes a tight loop of instructions
repeatedly to avoid having the InnoDB process and threads be
rescheduled by the operating system. If the spin loops are executed too
quickly, system resources are wasted, imposing a performance penalty on
transaction throughput. Most modern processors implement the `PAUSE'
instruction for use in spin loops, so the processor can be more
efficient.

InnoDB uses a `PAUSE' instruction in its spin loops on all platforms
where such an instruction is available.  This technique increases
overall performance with CPU-bound workloads, and has the added benefit
of minimizing power consumption during the execution of the spin loops.

You do not have to do anything to take advantage of this performance
improvement.

For performance considerations for InnoDB locking operations, see *Note
locking-issues::.


File: manual.info,  Node: innodb-performance-spin_lock_polling,  Next: innodb-performance-midpoint_insertion,  Prev: innodb-performance-pause_instruction,  Up: innodb-performance

14.4.7.14 Control of Spin Lock Polling
......................................

Many InnoDB mutexes and rw-locks are reserved for a short time. On a
multi-core system, it can be more efficient for a thread to
continuously check if it can acquire a mutex or rw-lock for a while
before sleeping. If the mutex or rw-lock becomes available during this
polling period, the thread can continue immediately, in the same time
slice. However, too-frequent polling by multiple threads of a shared
object can cause `cache ping pong', different processors invalidating
portions of each others' cache. InnoDB minimizes this issue by waiting
a random time between subsequent polls. The delay is implemented as a
busy loop.

You can control the maximum delay between testing a mutex or rw-lock
using the parameter `innodb_spin_wait_delay'. The duration of the delay
loop depends on the C compiler and the target processor. (In the 100MHz
Pentium era, the unit of delay was one microsecond.) On a system where
all processor cores share a fast cache memory, you might reduce the
maximum delay or disable the busy loop altogether by setting
`innodb_spin_wait_delay=0'. On a system with multiple processor chips,
the effect of cache invalidation can be more significant and you might
increase the maximum delay.

The default value of `innodb_spin_wait_delay' is `6'. The spin wait
delay is a dynamic global parameter that you can specify in the MySQL
option file (`my.cnf' or `my.ini') or change at runtime with the
command `SET GLOBAL innodb_spin_wait_delay=DELAY', where `DELAY' is the
desired maximum delay. Changing the setting requires the `SUPER'
privilege.

For performance considerations for InnoDB locking operations, see *Note
locking-issues::.


File: manual.info,  Node: innodb-performance-midpoint_insertion,  Next: innodb-performance-recovery,  Prev: innodb-performance-spin_lock_polling,  Up: innodb-performance

14.4.7.15 Making the Buffer Pool Scan Resistant
...............................................

Rather than using a strictly LRU algorithm, InnoDB uses a technique to
minimize the amount of data that is brought into the buffer pool and
never accessed again. The goal is to make sure that frequently accessed
(`hot') pages remain in the buffer pool, even as read-ahead and full
table scans bring in new blocks that might or might not be accessed
afterward.

Newly read blocks are inserted into the middle of the list representing
the buffer pool. of the LRU list. All newly read pages are inserted at
a location that by default is `3/8' from the tail of the LRU list. The
pages are moved to the front of the list (the most-recently used end)
when they are accessed in the buffer pool for the first time. Thus
pages that are never accessed never make it to the front portion of the
LRU list, and `age out' sooner than with a strict LRU approach. This
arrangement divides the LRU list into two segments, where the pages
downstream of the insertion point are considered `old' and are
desirable victims for LRU eviction.

For an explanation of the inner workings of the InnoDB buffer pool and
the specifics of its LRU replacement algorithm, see *Note
innodb-buffer-pool::.

You can control the insertion point in the LRU list, and choose whether
InnoDB applies the same optimization to blocks brought into the buffer
pool by table or index scans. The configuration parameter
`innodb_old_blocks_pct' controls the percentage of `old' blocks in the
LRU list. The default value of `innodb_old_blocks_pct' is `37',
corresponding to the original fixed ratio of 3/8. The value range is
`5' (new pages in the buffer pool age out very quickly) to `95' (only
5% of the buffer pool is reserved for hot pages, making the algorithm
close to the familiar LRU strategy).

The optimization that keeps the buffer pool from being churned by
read-ahead can avoid similar problems due to table or index scans.  In
these scans, a data page is typically accessed a few times in quick
succession and is never touched again. The configuration parameter
`innodb_old_blocks_time' specifies the time window (in milliseconds)
after the first access to a page during which it can be accessed
without being moved to the front (most-recently used end) of the LRU
list. The default value of `innodb_old_blocks_time' is `0',
corresponding to the original behavior of moving a page to the
most-recently used end of the buffer pool list when it is first
accessed in the buffer pool. Increasing this value makes more and more
blocks likely to age out faster from the buffer pool.

Both the new parameters `innodb_old_blocks_pct' and
`innodb_old_blocks_time' are dynamic, global and can be specified in
the MySQL option file (`my.cnf' or `my.ini') or changed at runtime with
the `SET GLOBAL' command.  Changing the setting requires the `SUPER'
privilege.

To help you gauge the effect of setting these parameters, the `SHOW
ENGINE INNODB STATUS' command reports additional statistics. The
`BUFFER POOL AND MEMORY' section now looks like:

     Total memory allocated 1107296256; in additional pool allocated 0
     Dictionary memory allocated 80360
     Buffer pool size   65535
     Free buffers       0
     Database pages     63920
     Old database pages 23600
     Modified db pages  34969
     Pending reads 32
     Pending writes: LRU 0, flush list 0, single page 0
     Pages made young 414946, not young 2930673
     1274.75 youngs/s, 16521.90 non-youngs/s
     Pages read 486005, created 3178, written 160585
     2132.37 reads/s, 3.40 creates/s, 323.74 writes/s
     Buffer pool hit rate 950 / 1000, young-making rate 30 / 1000 not 392 / 1000
     Pages read ahead 1510.10/s, evicted without access 0.00/s
     LRU len: 63920, unzip_LRU len: 0
     I/O sum[43690]:cur[221], unzip sum[0]:cur[0]

   * `Old database pages' is the number of pages in the `old' segment
     of the LRU list.

   * `Pages made young' and `not young' is the total number of `old'
     pages that have been made young or not respectively.

   * `youngs/s' and `non-young/s' is the rate at which page accesses to
     the `old' pages have resulted in making such pages young or
     otherwise respectively since the last invocation of the command.

   * `young-making rate' and `not' provides the same rate but in terms
     of overall buffer pool accesses instead of accesses just to the
     `old' pages.

*Note*:

Per second averages provided in `InnoDB' Monitor output are based on
the elapsed time between the current time and the last time `InnoDB'
Monitor output was printed.

Because the effects of these parameters can vary widely based on your
hardware configuration, your data, and the details of your workload,
always benchmark to verify the effectiveness before changing these
settings in any performance-critical or production environment.

In mixed workloads where most of the activity is OLTP type with
periodic batch reporting queries which result in large scans, setting
the value of `innodb_old_blocks_time' during the batch runs can help
keep the working set of the normal workload in the buffer pool.

When scanning large tables that cannot fit entirely in the buffer pool,
setting `innodb_old_blocks_pct' to a small value keeps the data that is
only read once from consuming a significant portion of the buffer pool.
For example, setting `innodb_old_blocks_pct=5' restricts this data that
is only read once to 5% of the buffer pool.

When scanning small tables that do fit into memory, there is less
overhead for moving pages around within the buffer pool, so you can
leave `innodb_old_blocks_pct' at its default value, or even higher,
such as `innodb_old_blocks_pct=50'.

The effect of the `innodb_old_blocks_time' parameter is harder to
predict than the `innodb_old_blocks_pct' parameter, is relatively
small, and varies more with the workload.  To arrive at an optimal
value, conduct your own benchmarks if the performance improvement from
adjusting `innodb_old_blocks_pct' is not sufficient.

For more information about the InnoDB buffer pool, see *Note
innodb-buffer-pool::.


File: manual.info,  Node: innodb-performance-recovery,  Next: innodb-performance-schema,  Prev: innodb-performance-midpoint_insertion,  Up: innodb-performance

14.4.7.16 Improvements to Crash Recovery Performance
....................................................

A number of optimizations speed up certain steps of the recovery that
happens on the next startup after a crash. In particular, scanning the
redo log and applying the redo log are faster than in MySQL 5.1 and
earlier, due to improved algorithms for memory management. You do not
need to take any actions to take advantage of this performance
enhancement. If you kept the size of your redo log files artificially
low because recovery took a long time, you can consider increasing the
file size.

For more information about InnoDB recovery, see *Note innodb-recovery::.


File: manual.info,  Node: innodb-performance-schema,  Next: innodb-multiple-buffer-pools,  Prev: innodb-performance-recovery,  Up: innodb-performance

14.4.7.17 Integration with the MySQL Performance Schema
.......................................................

Starting with InnoDB 1.1 with MySQL 5.5, you can profile certain
internal InnoDB operations using the MySQL *Note Performance Schema
feature: performance-schema. This type of tuning is primarily for
expert users, those who push the limits of MySQL performance, read the
MySQL source code, and evaluate optimization strategies to overcome
performance bottlenecks. DBAs can also use this feature for capacity
planning, to see whether their typical workload encounters any
performance bottlenecks with a particular combination of CPU, RAM, and
disk storage; and if so, to judge whether performance can be improved
by increasing the capacity of some part of the system.

To use this feature to examine InnoDB performance:

   * You must be running MySQL 5.5 or higher. You must build the
     database server from source, enabling the Performance Schema
     feature by building with the `--with-perfschema' option. Since the
     Performance Schema feature introduces some performance overhead,
     you should use it on a test or development system rather than on a
     production system.

   * You must be running InnoDB 1.1 or higher.

   * You must be generally familiar with how to use the *Note
     Performance Schema feature: performance-schema, for example to
     query tables in the `performance_schema' database.

   * Examine the following kinds of InnoDB objects by querying the
     appropriate `performance_schema' tables. The items associated with
     InnoDB all contain the substring `innodb' in the `EVENT_NAME'
     column.

     For the definitions of the `*_instances' tables, see *Note
     performance-schema-instance-tables::. For the definitions of the
     `*_summary_*' tables, see *Note
     performance-schema-summary-tables::. For the definition of the
     `thread' table, see *Note
     performance-schema-miscellaneous-tables::. For the definition of
     the `*_current_*' and `*_history_*' tables, see *Note
     performance-schema-waits-tables::.

        * Mutexes in the `mutex_instances' table. (Mutexes and RW-locks
          related to the `InnoDB' buffer pool are not included in this
          coverage; the same applies to the output of the `SHOW ENGINE
          INNODB MUTEX' command.)

        * RW-locks in the `rwlock_instances' table.

        * RW-locks in the `rwlock_instances' table.

        * File I/O operations in the `file_instances',
          `file_summary_by_event_name', and `file_summary_by_instance'
          tables.

        * Threads in the `PROCESSLIST' table.

   * During performance testing, examine the performance data in the
     `events_waits_current' and `events_waits_history_long' tables. If
     you are interested especially in InnoDB-related objects, use the
     clause `WHERE EVENT_NAME LIKE '%innodb%'' to see just those
     entries; otherwise, examine the performance statistics for the
     overall MySQL server.

   * You must be running MySQL 5.5, with the Performance Schema enabled
     by building with the `--with-perfschema' build option.

For more information about the MySQL Performance Schema, see *Note
performance-schema::.


File: manual.info,  Node: innodb-multiple-buffer-pools,  Next: innodb-multiple-rollback-segments,  Prev: innodb-performance-schema,  Up: innodb-performance

14.4.7.18 Improvements to Performance from Multiple Buffer Pools
................................................................

This performance enhancement is primarily useful for people with a
large buffer pool size, typically in the multi-gigabyte range. To take
advantage of this speedup, you must set the new
`innodb_buffer_pool_instances' configuration option, and you might also
adjust the `innodb_buffer_pool_size' value.

When the InnoDB buffer pool is large, many data requests can be
satisfied by retrieving from memory. You might encounter bottlenecks
from multiple threads trying to access the buffer pool at once.
Starting in InnoDB 1.1 and MySQL 5.5, you can enable multiple buffer
pools to minimize this contention. Each page that is stored in or read
from the buffer pool is assigned to one of the buffer pools randomly,
using a hashing function. Each buffer pool manages its own free lists,
flush lists, LRUs, and all other data structures connected to a buffer
pool, and is protected by its own buffer pool mutex.

To enable this feature, set the `innodb_buffer_pool_instances'
configuration option to a value greater than 1 (the default) up to 64
(the maximum). This option takes effect only when you set the
`innodb_buffer_pool_size' to a size of 1 gigabyte or more. The total
size you specify is divided among all the buffer pools. For best
efficiency, specify a combination of `innodb_buffer_pool_instances' and
`innodb_buffer_pool_size' so that each buffer pool instance is at least
1 gigabyte.

For more information about the InnoDB buffer pool, see *Note
innodb-buffer-pool::.


File: manual.info,  Node: innodb-multiple-rollback-segments,  Next: innodb-improved-purge-scheduling,  Prev: innodb-multiple-buffer-pools,  Up: innodb-performance

14.4.7.19 Better Scalability with Multiple Rollback Segments
............................................................

Starting in InnoDB 1.1 with MySQL 5.5, the limit on concurrent
transactions is greatly expanded, removing a bottleneck with the InnoDB
rollback segment that affected high-capacity systems. The limit applies
to concurrent transactions that change any data; read-only transactions
do not count against that maximum.

The single rollback segment is now divided into 128 segments, each of
which can support up to 1023 transactions that perform writes, for a
total of approximately 128K concurrent transactions. The original
transaction limit was 1023.

Each transaction is assigned to one of the rollback segments, and
remains tied to that rollback segment for the duration. This
enhancement improves both scalability (higher number of concurrent
transactions) and performance (less contention when different
transactions access the rollback segments).

To take advantage of this feature, you do not need to create any new
database or tables, or reconfigure anything. You must do a slow
shutdown before upgrading from MySQL 5.1 or earlier, or some time
afterward.  InnoDB makes the required changes inside the system
tablespace automatically, the first time you restart after performing a
slow shutdown.

For more information about performance of InnoDB under high
transactional load, see *Note
optimizing-innodb-transaction-management::.


File: manual.info,  Node: innodb-improved-purge-scheduling,  Next: innodb-improved-log-sys-mutex,  Prev: innodb-multiple-rollback-segments,  Up: innodb-performance

14.4.7.20 Better Scalability with Improved Purge Scheduling
...........................................................

Starting in InnoDB 1.1 with MySQL 5.5, the purge operations (a type of
garbage collection) that InnoDB performs automatically can be done in a
separate thread, rather than as part of the master thread. This change
improves scalability, because the main database operations run
independently from maintenance work happening in the background.

To enable this feature, set the configuration option
`innodb_purge_threads=1', as opposed to the default of 0, which
combines the purge operation into the master thread.

You might not notice a significant speedup, because the purge thread
might encounter new types of contention; the single purge thread really
lays the groundwork for further tuning and possibly multiple purge
threads in the future. There is another new configuration option,
`innodb_purge_batch_size' with a default of 20 and maximum of 5000.
This option is mainly intended for experimentation and tuning of purge
operations, and should not be interesting to typical users.

For more information about InnoDB I/O performance, see *Note
optimizing-innodb-diskio::.


File: manual.info,  Node: innodb-improved-log-sys-mutex,  Next: innodb-separate-flush-list-mutex,  Prev: innodb-improved-purge-scheduling,  Up: innodb-performance

14.4.7.21 Improved Log Sys Mutex
................................

This is another performance improvement that comes for free, with no
user action or configuration needed. The details here are intended for
performance experts who delve into the InnoDB source code, or interpret
reports with keywords such as `mutex' and `log_sys'.

The mutex known as the log sys mutex has historically done double duty,
controlling access to internal data structures related to log records
and the LSN, as well as pages in the buffer pool that are changed when a
mini-transaction is committed. Starting in InnoDB 1.1 with MySQL 5.5,
these two kinds of operations are protected by separate mutexes, with a
new `log_buf' mutex controlling writes to buffer pool pages due to
mini-transactions.

For performance considerations for InnoDB locking operations, see *Note
locking-issues::.


File: manual.info,  Node: innodb-separate-flush-list-mutex,  Prev: innodb-improved-log-sys-mutex,  Up: innodb-performance

14.4.7.22 Separate Flush List Mutex
...................................

Starting with InnoDB 1.1 with MySQL 5.5, concurrent access to the
buffer pool is faster.  Operations involving the flush list, a data
structure related to the buffer pool, are now controlled by a separate
mutex and do not block access to the buffer pool. You do not need to
configure anything to take advantage of this speedup; it is fully
automatic.

For more information about the InnoDB buffer pool, see *Note
innodb-buffer-pool::.


File: manual.info,  Node: innodb-other-changes,  Next: innodb-installation,  Prev: innodb-performance,  Up: innodb-5-5

14.4.8 Changes for Flexibility, Ease of Use and Reliability
-----------------------------------------------------------

* Menu:

* innodb-other-changes-file-formats::  The Barracuda File Format
* innodb-other-changes-dynamic-parameters::  Dynamic Control of System Configuration Parameters
* innodb-other-changes-truncate::  `TRUNCATE TABLE' Reclaims Space
* innodb-other-changes-strict-mode::  InnoDB Strict Mode
* innodb-other-changes-statistics-estimation::  Controlling Optimizer Statistics Estimation
* innodb-other-changes-drop-index::  Better Error Handling when Dropping Indexes
* innodb-other-changes-show-mutex::  More Compact Output of `SHOW ENGINE INNODB MUTEX'
* innodb-other-changes-readahead-counters::  More Read-Ahead Statistics

This chapter describes several recently added InnoDB features that
offer new flexibility and improve ease of use, reliability and
performance. The Barracuda file format improves efficiency for storing
large variable-length columns, and enables table compression.
Configuration options that once were unchangeable after startup, are
now flexible and can be changed dynamically. Some improvements are
automatic, such as faster and more efficient `TRUNCATE TABLE'. Others
allow you the flexibility to control InnoDB behavior; for example, you
can control whether certain problems cause errors or just warnings. And
informational messages and error reporting continue to be made more
user-friendly.


File: manual.info,  Node: innodb-other-changes-file-formats,  Next: innodb-other-changes-dynamic-parameters,  Prev: innodb-other-changes,  Up: innodb-other-changes

14.4.8.1 The Barracuda File Format
..................................

InnoDB has started using named file formats to improve compatibility in
upgrade and downgrade situations, or heterogeneous systems running
different levels of MySQL. Many important InnoDB features, such as
table compression and the `DYNAMIC' row format for more efficient BLOB
storage, require creating tables in the Barracuda file format. The
original file format, which previously didn't have a name, is known now
as Antelope.

To create new tables that take advantage of the Barracuda features,
enable that file format using the configuration parameter
`innodb_file_format'. The value of this parameter determines whether a
newly created table or index can use compression or the new `DYNAMIC'
row format.

To preclude the use of new features that would make your database
inaccessible to the built-in InnoDB in MySQL 5.1 and prior releases,
omit `innodb_file_format' or set it to Antelope.

You can set the value of `innodb_file_format' on the command line when
you start `mysqld', or in the option file `my.cnf' (Unix operating
systems) or `my.ini' (Windows). You can also change it dynamically with
the `SET GLOBAL' statement.

For more information about managing file formats, see *Note
innodb-file-format::.


File: manual.info,  Node: innodb-other-changes-dynamic-parameters,  Next: innodb-other-changes-truncate,  Prev: innodb-other-changes-file-formats,  Up: innodb-other-changes

14.4.8.2 Dynamic Control of System Configuration Parameters
...........................................................

* Menu:

* innodb-other-changes-innodb_file_per_table::  Dynamically Changing `innodb_file_per_table'
* innodb-other-changes-innodb_stats_on_metadata::  Dynamically Changing `innodb_stats_on_metadata'
* innodb-other-changes-innodb_lock_wait_timeout::  Dynamically Changing `innodb_lock_wait_timeout'
* innodb-other-changes-innodb_adaptive_hash_index::  Dynamically Changing `innodb_adaptive_hash_index'

In MySQL 5.5 and higher, you can change certain system configuration
parameters without shutting down and restarting the server, as was
necessary in MySQL 5.1 and lower. This increases uptime, and makes it
easier to test and prototype new SQL and application code. The
following sections explain these parameters.


File: manual.info,  Node: innodb-other-changes-innodb_file_per_table,  Next: innodb-other-changes-innodb_stats_on_metadata,  Prev: innodb-other-changes-dynamic-parameters,  Up: innodb-other-changes-dynamic-parameters

14.4.8.3 Dynamically Changing `innodb_file_per_table'
.....................................................

Since MySQL version 4.1, InnoDB has provided two alternatives for how
tables are stored on disk. You can create a new table and its indexes
in the shared system tablespace, physically stored in the ibdata files.
Or, you can store a new table and its indexes in a separate tablespace
(a .ibd file). The storage layout for each InnoDB table is determined
by the configuration parameter `innodb_file_per_table' at the time the
table is created.

In MySQL 5.5 and higher, the configuration parameter
`innodb_file_per_table' is dynamic, and can be set `ON' or `OFF' using
the `SET GLOBAL'.  Previously, the only way to set this parameter was
in the MySQL option file (`my.cnf' or `my.ini'), and changing it
required shutting down and restarting the server.

The default setting is `OFF', so new tables and indexes are created in
the system tablespace. Dynamically changing the value of this parameter
requires the `SUPER' privilege and immediately affects the operation of
all connections.

Tables created when `innodb_file_per_table' is enabled can use the
Barracuda file format, and `TRUNCATE' returns the disk space for those
tables to the operating system. The Barracuda file format in turn
enables features such as table compression and the `DYNAMIC' row
format. Tables created when `innodb_file_per_table' is off cannot use
these features. To take advantage of those features for an existing
table, you can turn on the file-per-table setting and run `ALTER TABLE
T ENGINE=INNODB' for that table.

When you redefine the primary key for an InnoDB table, the table is
re-created using the current settings for `innodb_file_per_table' and
`innodb_file_format'. This behavior does not apply when adding or
dropping InnoDB secondary indexes, as explained in *Note
innodb-create-index::.  When a secondary index is created without
rebuilding the table, the index is stored in the same file as the table
data, regardless of the current `innodb_file_per_table' setting.


File: manual.info,  Node: innodb-other-changes-innodb_stats_on_metadata,  Next: innodb-other-changes-innodb_lock_wait_timeout,  Prev: innodb-other-changes-innodb_file_per_table,  Up: innodb-other-changes-dynamic-parameters

14.4.8.4 Dynamically Changing `innodb_stats_on_metadata'
........................................................

In MySQL 5.5 and higher, you can change the setting of
`innodb_stats_on_metadata' dynamically at runtime, to control whether
or not InnoDB performs statistics gathering when metadata statements are
executed. To change the setting, issue the statement `SET GLOBAL
innodb_stats_on_metadata=MODE', where `MODE' is either `ON' or `OFF' (or
`1' or `0'). Changing this setting requires the `SUPER' privilege and
immediately affects the operation of all connections.

This setting is related to the feature described in *Note
innodb-other-changes-statistics-estimation::.


File: manual.info,  Node: innodb-other-changes-innodb_lock_wait_timeout,  Next: innodb-other-changes-innodb_adaptive_hash_index,  Prev: innodb-other-changes-innodb_stats_on_metadata,  Up: innodb-other-changes-dynamic-parameters

14.4.8.5 Dynamically Changing `innodb_lock_wait_timeout'
........................................................

The length of time a transaction waits for a resource, before giving up
and rolling back the statement, is determined by the value of the
configuration parameter `innodb_lock_wait_timeout'. (In MySQL 5.0.12
and earlier, the entire transaction was rolled back, not just the
statement.) Your application can try the statement again (usually after
waiting for a while), or roll back the entire transaction and restart.

The error returned when the timeout period is exceeded is:

     ERROR HY000: Lock wait timeout exceeded; try restarting transaction

In MySQL 5.5 and higher, the configuration parameter
`innodb_lock_wait_timeout' can be set at runtime with the `SET GLOBAL'
or `SET SESSION' statement. Changing the `GLOBAL' setting requires the
`SUPER' privilege and affects the operation of all clients that
subsequently connect. Any client can change the `SESSION' setting for
`innodb_lock_wait_timeout', which affects only that client.

In MySQL 5.1 and earlier, the only way to set this parameter was in the
MySQL option file (`my.cnf' or `my.ini'), and changing it required
shutting down and restarting the server.


File: manual.info,  Node: innodb-other-changes-innodb_adaptive_hash_index,  Prev: innodb-other-changes-innodb_lock_wait_timeout,  Up: innodb-other-changes-dynamic-parameters

14.4.8.6 Dynamically Changing `innodb_adaptive_hash_index'
..........................................................

As described in *Note innodb-performance-adaptive_hash_index::, it may
be desirable, depending on your workload, to dynamically enable or
disable the adaptive hash indexing scheme InnoDB uses to improve query
performance.

The start-up option `innodb_adaptive_hash_index' allows the adaptive
hash index to be disabled. It is enabled by default. You can modify
this parameter through the `SET GLOBAL' statement, without restarting
the server.  Changing the setting requires the `SUPER' privilege.

Disabling the adaptive hash index empties the hash table immediately.
Normal operations can continue while the hash table is emptied, and
executing queries that were using the hash table access the index
B-trees directly instead. When the adaptive hash index is re-enabled,
the hash table is populated again during normal operation.


File: manual.info,  Node: innodb-other-changes-truncate,  Next: innodb-other-changes-strict-mode,  Prev: innodb-other-changes-dynamic-parameters,  Up: innodb-other-changes

14.4.8.7 `TRUNCATE TABLE' Reclaims Space
........................................

When you truncate a table that is stored in a `.ibd' file of its own
(because `innodb_file_per_table' was enabled when the table was
created), and if the table is not referenced in a `FOREIGN KEY'
constraint, the table is dropped and re-created in a new `.ibd' file.
This operation is much faster than deleting the rows one by one. The
operating system can reuse the disk space, in contrast to tables within
the InnoDB system tablespace, where only InnoDB can use the space after
they are truncated. Physical backups can also be smaller, without big
blocks of unused space in the middle of the system tablespace.

Previous versions of InnoDB would re-use the existing `.ibd' file, thus
releasing the space only to InnoDB for storage management, but not to
the operating system.  Note that when the table is truncated, the count
of rows affected by the `TRUNCATE TABLE' statement is an arbitrary
number.

*Note*:

If there is a referential constraint between two columns in the same
table, that table can still be truncated using this fast technique.

If there are referential constraints between the table being truncated
and other tables, the truncate operation fails. This is a change to the
previous behavior, which would transform the `TRUNCATE' operation to a
`DELETE' operation that removed all the rows and triggered `ON DELETE'
operations on child tables.


File: manual.info,  Node: innodb-other-changes-strict-mode,  Next: innodb-other-changes-statistics-estimation,  Prev: innodb-other-changes-truncate,  Up: innodb-other-changes

14.4.8.8 InnoDB Strict Mode
...........................

To guard against ignored typos and syntax errors in SQL, or other
unintended consequences of various combinations of operational modes
and SQL statements, InnoDB provides a strict mode of operations.  In
this mode, InnoDB raises error conditions in certain cases, rather than
issuing a warning and processing the specified statement (perhaps with
unintended behavior). This is analogous to `sql_mode' in MySQL, which
controls what SQL syntax MySQL accepts, and determines whether it
silently ignores errors, or validates input syntax and data values.
Since strict mode is relatively new, some statements that execute
without errors with earlier versions of MySQL might generate errors
unless you disable strict mode.

The setting of InnoDB strict mode affects the handling of syntax errors
on the *Note `CREATE TABLE': create-table, *Note `ALTER TABLE':
alter-table. and *Note `CREATE INDEX': create-index. statements. The
strict mode also enables a record size check, so that an `INSERT' or
`UPDATE' never fails due to the record being too large for the selected
page size.

We recommend running in strict mode when using the `ROW_FORMAT' and
`KEY_BLOCK_SIZE' clauses on *Note `CREATE TABLE': create-table, *Note
`ALTER TABLE': alter-table, and *Note `CREATE INDEX': create-index.
statements. Without strict mode, InnoDB ignores conflicting clauses and
creates the table or index, with only a warning in the message log. The
resulting table might have different behavior than you intended, such
as having no compression when you tried to create a compressed table.
When InnoDB strict mode is on, such problems generate an immediate
error and the table or index is not created, avoiding a troubleshooting
session later.

InnoDB strict mode is set with the configuration parameter
`innodb_strict_mode', which can be specified as `on' or `off'. You can
set the value on the command line when you start `mysqld', or in the
configuration file `my.cnf' or `my.ini'. You can also enable or disable
InnoDB strict mode at runtime with the statement `SET [GLOBAL|SESSION]
innodb_strict_mode=MODE', where `MODE' is either `ON' or `OFF'.
Changing the `GLOBAL' setting requires the `SUPER' privilege and
affects the operation of all clients that subsequently connect. Any
client can change the `SESSION' setting for `innodb_strict_mode', and
the setting affects only that client.


File: manual.info,  Node: innodb-other-changes-statistics-estimation,  Next: innodb-other-changes-drop-index,  Prev: innodb-other-changes-strict-mode,  Up: innodb-other-changes

14.4.8.9 Controlling Optimizer Statistics Estimation
....................................................

The MySQL query optimizer uses estimated statistics about key
distributions to choose the indexes for an execution plan, based on the
relative selectivity of the index.  Certain operations cause InnoDB to
sample random pages from each index on a table to estimate the
cardinality of the index.  (This technique is known as random dives.)
These operations include the *Note `ANALYZE TABLE': analyze-table.
statement, the *Note `SHOW TABLE STATUS': show-table-status. statement,
and accessing the table for the first time after a restart.

To give you control over the quality of the statistics estimate (and
thus better information for the query optimizer), you can now change
the number of sampled pages using the parameter
`innodb_stats_sample_pages'.  Previously, the number of sampled pages
was always 8, which could be insufficient to produce an accurate
estimate, leading to poor index choices by the query optimizer. This
technique is especially important for large tables and tables used in
joins. Unnecessary full table scans for such tables can be a
substantial performance issue.

You can set the global parameter `innodb_stats_sample_pages', at
runtime. The default value for this parameter is 8, preserving the same
behavior as in past releases.

*Note*:

The value of `innodb_stats_sample_pages' affects the index sampling for
_all_ tables and indexes. There are the following potentially
significant impacts when you change the index sample size:

   * Small values like 1 or 2 can result in very inaccurate estimates
     of cardinality.

   * Increasing the `innodb_stats_sample_pages' value might require
     more disk reads. Values much larger than 8 (say, 100), can cause a
     big slowdown in the time it takes to open a table or execute `SHOW
     TABLE STATUS'.

   * The optimizer might choose very different query plans based on
     different estimates of index selectivity.

To disable the cardinality estimation for metadata statements such as
`SHOW TABLE STATUS', execute the statement `SET GLOBAL
innodb_stats_on_metadata=OFF' (or `0'). The ability to set this option
dynamically is also relatively new.

All InnoDB tables are opened, and the statistics are re-estimated for
all associated indexes, when the `mysql' client starts if the
auto-rehash setting is set on (the default).  To improve the start up
time of the `mysql' client, you can turn auto-rehash off. The
auto-rehash feature enables automatic name completion of database,
table, and column names for interactive users.

Whatever value of `innodb_stats_sample_pages' works best for a system,
set the option and leave it at that value.  Choose a value that results
in reasonably accurate estimates for all tables in your database
without requiring excessive I/O.  Because the statistics are
automatically recalculated at various times other than on execution of
*Note `ANALYZE TABLE': analyze-table, it does not make sense to
increase the index sample size, run *Note `ANALYZE TABLE':
analyze-table, then decrease sample size again. The more accurate
statistics calculated by `ANALYZE' running with a high value of
`innodb_stats_sample_pages' can be wiped away later.

Although it is not possible to specify the sample size on a per-table
basis, smaller tables generally require fewer index samples than larger
tables do. If your database has many large tables, consider using a
higher value for `innodb_stats_sample_pages' than if you have mostly
smaller tables.


File: manual.info,  Node: innodb-other-changes-drop-index,  Next: innodb-other-changes-show-mutex,  Prev: innodb-other-changes-statistics-estimation,  Up: innodb-other-changes

14.4.8.10 Better Error Handling when Dropping Indexes
.....................................................

For optimal performance with DML statements, InnoDB requires an index
to exist on foreign key columns, so that `UPDATE' and `DELETE'
operations on a parent table can easily check whether corresponding
rows exist in the child table. MySQL creates or drops such indexes
automatically when needed, as a side-effect of *Note `CREATE TABLE':
create-table, *Note `CREATE INDEX': create-index, and *Note `ALTER
TABLE': alter-table. statements.

When you drop an index, InnoDB checks whether the index is not used for
checking a foreign key constraint. It is still OK to drop the index if
there is another index that can be used to enforce the same constraint.
InnoDB prevents you from dropping the last index that can enforce a
particular referential constraint.

The message that reports this error condition is:

     ERROR 1553 (HY000): Cannot drop index 'FOOIDX':
     needed in a foreign key constraint

This message is friendlier than the earlier message it replaces:

     ERROR 1025 (HY000): Error on rename of './DB2/#SQL-18EB_3'
     to './DB2/FOO'(errno: 150)

A similar change in error reporting applies to an attempt to drop the
primary key index. For tables without an explicit `PRIMARY KEY', InnoDB
creates an implicit clustered index using the first columns of the
table that are declared `UNIQUE' and `NOT NULL'. When you drop such an
index, InnoDB automatically copies the table and rebuilds the index
using a different `UNIQUE NOT NULL' group of columns or a
system-generated key. Since this operation changes the primary key, it
uses the slow method of copying the table and re-creating the index,
rather than the Fast Index Creation technique from *Note
innodb-create-index-implementation::.

Previously, an attempt to drop an implicit clustered index (the first
`UNIQUE NOT NULL' index) failed if the table did not contain a `PRIMARY
KEY':

     ERROR 42000: This table type requires a primary key


File: manual.info,  Node: innodb-other-changes-show-mutex,  Next: innodb-other-changes-readahead-counters,  Prev: innodb-other-changes-drop-index,  Up: innodb-other-changes

14.4.8.11 More Compact Output of `SHOW ENGINE INNODB MUTEX'
...........................................................

The statement `SHOW ENGINE INNODB MUTEX' displays information about
InnoDB mutexes and rw-locks. Although this information is useful for
tuning on multi-core systems, the amount of output can be overwhelming
on systems with a big buffer pool. There is one mutex and one rw-lock
in each 16K buffer pool block, and there are 65,536 blocks per
gigabyte. It is unlikely that a single block mutex or rw-lock from the
buffer pool could become a performance bottleneck.

`SHOW ENGINE INNODB MUTEX' now skips the mutexes and rw-locks of buffer
pool blocks. It also does not list any mutexes or rw-locks that have
never been waited on (`os_waits=0'). Thus, `SHOW ENGINE INNODB MUTEX'
only displays information about mutexes and rw-locks outside of the
buffer pool that have caused at least one OS-level wait.


File: manual.info,  Node: innodb-other-changes-readahead-counters,  Prev: innodb-other-changes-show-mutex,  Up: innodb-other-changes

14.4.8.12 More Read-Ahead Statistics
....................................

As described in *Note innodb-performance-read_ahead::, a read-ahead
request is an asynchronous I/O request issued in anticipation that a
page will be used in the near future. Knowing how many pages are read
through this read-ahead mechanism, and how many of them are evicted
from the buffer pool without ever being accessed, can be useful to help
fine-tune the parameter `innodb_read_ahead_threshold'.

`SHOW ENGINE INNODB STATUS' output displays the global status variables
`Innodb_buffer_pool_read_ahead' and
`Innodb_buffer_pool_read_ahead_evicted'. These variables indicate the
number of pages brought into the buffer pool by read-ahead requests,
and the number of such pages evicted from the buffer pool without ever
being accessed respectively. These counters provide global values since
the last server restart.

`SHOW ENGINE INNODB INNODB STATUS' also shows the rate at which the
read-ahead pages are read in and the rate at which such pages are
evicted without being accessed. The per-second averages are based on
the statistics collected since the last invocation of `SHOW ENGINE
INNODB INNODB STATUS' and are displayed in the `BUFFER POOL AND MEMORY'
section of the output.

Since the InnoDB read-ahead mechanism has been simplified to remove
random read-ahead, the status variables
`Innodb_buffer_pool_read_ahead_rnd' and
`Innodb_buffer_pool_read_ahead_seq' are no longer part of the `SHOW
ENGINE INNODB STATUS' output.


File: manual.info,  Node: innodb-installation,  Next: innodb-upgrading,  Prev: innodb-other-changes,  Up: innodb-5-5

14.4.9 Installing the InnoDB Storage Engine
-------------------------------------------

When you use the InnoDB storage engine 1.1 and above, with MySQL 5.5 and
above, you do not need to do anything special to install: everything
comes configured as part of the MySQL source and binary distributions.
This is a change from earlier releases of the InnoDB Plugin, where you
were required to match up MySQL and InnoDB version numbers and update
your build and configuration processes.

The InnoDB storage engine is included in the MySQL distribution,
starting from MySQL 5.1.38. From MySQL 5.1.46 and up, this is the only
download location for the InnoDB storage engine; it is not available
from the InnoDB web site.

If you used any scripts or configuration files with the earlier InnoDB
storage engine from the InnoDB web site, be aware that the filename of
the shared library as supplied by MySQL is `ha_innodb_plugin.so' or
`ha_innodb_plugin.dll', as opposed to `ha_innodb.so' or `ha_innodb.dll'
in the older Plugin downloaded from the InnoDB web site. You might need
to change the applicable file names in your startup or configuration
scripts.

Because the InnoDB storage engine has now replaced the built-in InnoDB,
you no longer need to specify options like `--ignore-builtin-innodb' and
`--plugin-load' during startup.

To take best advantage of current InnoDB features, we recommend
specifying the following options in your configuration file:

     innodb_file_per_table=1
     innodb_file_format=barracuda
     innodb_strict_mode=1

For information about these new features, see *Note
innodb-other-changes-innodb_file_per_table::, *Note
innodb-file-format::, and *Note innodb-other-changes-strict-mode::. You
might need to continue to use the previous values for these parameters
in some replication and similar configurations involving both new and
older versions of MySQL.


File: manual.info,  Node: innodb-upgrading,  Next: innodb-downgrading,  Prev: innodb-installation,  Up: innodb-5-5

14.4.10 Upgrading the InnoDB Storage Engine
-------------------------------------------

Prior to MySQL 5.5, some upgrade scenarios involved upgrading the
separate instance of InnoDB known as the InnoDB Plugin. In MySQL 5.5
and higher, the features of the InnoDB Plugin have been folded back
into built-in InnoDB, so the upgrade procedure for InnoDB is the same
as the one for the MySQL server. For details, see *Note upgrading::.


File: manual.info,  Node: innodb-downgrading,  Next: innodb-changes,  Prev: innodb-upgrading,  Up: innodb-5-5

14.4.11 Downgrading the InnoDB Storage Engine
---------------------------------------------

* Menu:

* innodb-downgrading-overview::  Overview


File: manual.info,  Node: innodb-downgrading-overview,  Prev: innodb-downgrading,  Up: innodb-downgrading

14.4.11.1 Overview
..................

Prior to MySQL 5.5, some downgrade scenarios involved switching the
separate instance of InnoDB known as the InnoDB Plugin back to the
built-in InnoDB storage engine. In MySQL 5.5 and higher, the features
of the InnoDB Plugin have been folded back into built-in InnoDB, so the
downgrade procedure for InnoDB is the same as the one for the MySQL
server. For details, see *Note downgrading::.


File: manual.info,  Node: innodb-changes,  Next: innodb-contrib,  Prev: innodb-downgrading,  Up: innodb-5-5

14.4.12 InnoDB Storage Engine Change History
--------------------------------------------

* Menu:

* innodb-changes-1x::            Changes in InnoDB Storage Engine 1.x
* innodb-changes-11::            Changes in InnoDB Storage Engine 1.1 (April 13, 2010)
* innodb-changes-10x::           Changes in InnoDB Plugin 1.0.x


File: manual.info,  Node: innodb-changes-1x,  Next: innodb-changes-11,  Prev: innodb-changes,  Up: innodb-changes

14.4.12.1 Changes in InnoDB Storage Engine 1.x
..............................................

Since InnoDB 1.1 is tightly integrated with MySQL 5.5, for changes
after the initial InnoDB 1.1 release, see the MySQL 5.5 Release Notes
(http://dev.mysql.com/doc/relnotes/mysql/5.5/en/).


File: manual.info,  Node: innodb-changes-11,  Next: innodb-changes-10x,  Prev: innodb-changes-1x,  Up: innodb-changes

14.4.12.2 Changes in InnoDB Storage Engine 1.1 (April 13, 2010)
...............................................................

For an overview of the changes, see this introduction article for MySQL
5.5 with InnoDB 1.1
(http://dev.mysql.com/tech-resources/articles/introduction-to-mysql-55.html).
The following is a condensed version of the change log.

Fix for Bug #52580: Crash in ha_innobase::open on executing INSERT with
concurrent ALTER TABLE.

Change in MySQL Bug #51557 releases the mutex LOCK_open before
ha_innobase::open(), causing racing condition for index translation
table creation. Fix it by adding dict_sys mutex for the operation.

Add support for multiple buffer pools.

Fix Bug #26590: MySQL does not allow more than 1023 open transactions.
Create additional rollback segments on startup.  Reduce the upper limit
of total rollback segments from 256 to 128.  This is because we can't
use the sign bit. It has not caused problems in the past because we
only created one segment. InnoDB has always had the capability to use
the additional rollback segments, therefore this patch is backward
compatible. The only requirement to maintain backward compatibility has
been to ensure that the additional segments are created after the
double write buffer. This is to avoid breaking assumptions in the
existing code.

Implement Performance Schema in InnoDB. Objects in four different
modules in InnoDB have been performance instrumented, these modules
are: mutexes, rwlocks, file I/O, and threads. We mostly preserved the
existing APIs, but APIs would point to instrumented function wrappers
if performance schema is defined. There are 4 different defines that
control the instrumentation of each module.  The feature is off by
default, and will be compiled in with a special build option, and
require a configure option to turn it on when the server boots.

Implement the buf_pool_watch for DeleteBuffering in the page hash
table. This serves two purposes. It allows multiple watches to be set
at the same time (by multiple purge threads) and it removes a race
condition when the read of a block completes about the time the buffer
pool watch is being set.

Introduce a new mutex to protect flush_list. Redesign mtr_commit() in a
way that log_sys mutex is not held while all mtr_memos are popped and
is released just after the modified blocks are inserted into the
flush_list. This should reduce contention on log_sys mutex.

Implement the global variable `innodb_change_buffering', with the
following values:

   * `none': buffer nothing

   * `inserts': buffer inserts (like InnoDB so far)

   * `deletes': buffer delete-marks

   * `changes': buffer inserts and delete-marks

   * `purges': buffer delete-marks and deletes

   * `all': buffer all operations (insert, delete-mark, delete)

The default is `all'. All values except `none' and `inserts' will make
InnoDB write new-format records to the insert buffer, even for inserts.

Provide support for native AIO on Linux.


File: manual.info,  Node: innodb-changes-10x,  Prev: innodb-changes-11,  Up: innodb-changes

14.4.12.3 Changes in InnoDB Plugin 1.0.x
........................................

The InnoDB 1.0.x releases that accompany MySQL 5.1 have their own
change history. Changes up to InnoDB 1.0.8 are listed at
`http://dev.mysql.com/doc/innodb-plugin/1.0/en/innodb-changes.html'.
Changes from InnoDB 1.0.9 and up are incorporated in the MySQL 5.1
Release Notes (http://dev.mysql.com/doc/relnotes/mysql/5.1/en/).


File: manual.info,  Node: innodb-contrib,  Next: innodb-parameter-changes,  Prev: innodb-changes,  Up: innodb-5-5

14.4.13 Third-Party Software
----------------------------

* Menu:

* innodb-contrib-google::        Performance Patches from Google
* innodb-contrib-percona::       Multiple Background I/O Threads Patch from Percona
* innodb-contrib-sun_microsystems::  Performance Patches from Sun Microsystems

Oracle acknowledges that certain Third Party and Open Source software
has been used to develop or is incorporated in the InnoDB storage
engine. This appendix includes required third-party license information.


File: manual.info,  Node: innodb-contrib-google,  Next: innodb-contrib-percona,  Prev: innodb-contrib,  Up: innodb-contrib

14.4.13.1 Performance Patches from Google
.........................................

Oracle gratefully acknowledges the following contributions from Google,
Inc. to improve InnoDB performance:

   * Replacing InnoDB's use of Pthreads mutexes with calls to GCC
     atomic builtins, as discussed in *Note
     innodb-performance-latching::. This change means that InnoDB mutex
     and and rw-lock operations take less CPU time, and improves
     throughput on those platforms where the atomic operations are
     available.

   * Controlling master thread `I/O' rate, as discussed in *Note
     innodb-performance-thread_io_rate::. The master thread in InnoDB
     is a thread that performs various tasks in the background.
     Historically, InnoDB has used a hard coded value as the total
     `I/O' capacity of the server. With this change, user can control
     the number of `I/O' operations that can be performed per second
     based on their own workload.

Changes from the Google contributions were incorporated in the
following source code files: `btr0cur.c', `btr0sea.c', `buf0buf.c',
`buf0buf.ic', `ha_innodb.cc', `log0log.c', `log0log.h', `os0sync.h',
`row0sel.c', `srv0srv.c', `srv0srv.h', `srv0start.c', `sync0arr.c',
`sync0rw.c', `sync0rw.h', `sync0rw.ic', `sync0sync.c', `sync0sync.h',
`sync0sync.ic', and `univ.i'.

These contributions are incorporated subject to the conditions
contained in the file `COPYING.Google', which are reproduced here.

     Copyright (c) 2008, 2009, Google Inc.
     All rights reserved.
     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions
     are met:
         * Redistributions of source code must retain the above copyright
           notice, this list of conditions and the following disclaimer.
         * Redistributions in binary form must reproduce the above
           copyright notice, this list of conditions and the following
           disclaimer in the documentation and/or other materials
           provided with the distribution.
         * Neither the name of the Google Inc. nor the names of its
           contributors may be used to endorse or promote products
           derived from this software without specific prior written
           permission.
     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
     COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
     INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
     BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
     ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     POSSIBILITY OF SUCH DAMAGE.


File: manual.info,  Node: innodb-contrib-percona,  Next: innodb-contrib-sun_microsystems,  Prev: innodb-contrib-google,  Up: innodb-contrib

14.4.13.2 Multiple Background I/O Threads Patch from Percona
............................................................

Oracle gratefully acknowledges the contribution of Percona, Inc.  to
improve InnoDB performance by implementing configurable background
threads, as discussed in *Note
innodb-performance-multiple_io_threads::. InnoDB uses background
threads to service various types of I/O requests.  The change provides
another way to make InnoDB more scalable on high end systems.

Changes from the Percona, Inc. contribution were incorporated in the
following source code files: `ha_innodb.cc', `os0file.c', `os0file.h',
`srv0srv.c', `srv0srv.h', and `srv0start.c'.

This contribution is incorporated subject to the conditions contained
in the file `COPYING.Percona', which are reproduced here.

     Copyright (c) 2008, 2009, Percona Inc.
     All rights reserved.
     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions
     are met:
         * Redistributions of source code must retain the above copyright
           notice, this list of conditions and the following disclaimer.
         * Redistributions in binary form must reproduce the above
           copyright notice, this list of conditions and the following
           disclaimer in the documentation and/or other materials
           provided with the distribution.
         * Neither the name of the Percona Inc. nor the names of its
           contributors may be used to endorse or promote products
           derived from this software without specific prior written
           permission.
     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
     COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
     INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
     BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
     ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     POSSIBILITY OF SUCH DAMAGE.


File: manual.info,  Node: innodb-contrib-sun_microsystems,  Prev: innodb-contrib-percona,  Up: innodb-contrib

14.4.13.3 Performance Patches from Sun Microsystems
...................................................

Oracle gratefully acknowledges the following contributions from Sun
Microsystems, Inc. to improve InnoDB performance:

   * Introducing the PAUSE instruction inside spin loops, as discussed
     in *Note innodb-performance-pause_instruction::. This change
     increases performance in high concurrency, CPU-bound workloads.

   * Enabling inlining of functions and prefetch with Sun Studio.

Changes from the Sun Microsystems, Inc. contribution were incorporated
in the following source code files: `univ.i', `ut0ut.c', and `ut0ut.h'.

This contribution is incorporated subject to the conditions contained
in the file `COPYING.Sun_Microsystems', which are reproduced here.

     Copyright (c) 2009, Sun Microsystems, Inc.
     All rights reserved.
     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions
     are met:
         * Redistributions of source code must retain the above copyright
           notice, this list of conditions and the following disclaimer.
         * Redistributions in binary form must reproduce the above
           copyright notice, this list of conditions and the following
           disclaimer in the documentation and/or other materials
           provided with the distribution.
         * Neither the name of Sun Microsystems, Inc. nor the names of its
           contributors may be used to endorse or promote products
           derived from this software without specific prior written
           permission.
     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
     COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
     INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
     BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
     ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     POSSIBILITY OF SUCH DAMAGE.


File: manual.info,  Node: innodb-parameter-changes,  Prev: innodb-contrib,  Up: innodb-5-5

14.4.14 List of Parameters Changed in InnoDB 1.1 and InnoDB Plugin 1.0
----------------------------------------------------------------------

* Menu:

* innodb-parameters-new::        New Parameters
* innodb-parameters-deprecated::  Deprecated Parameters
* innodb-parameters-new-defaults::  Parameters with New Defaults


File: manual.info,  Node: innodb-parameters-new,  Next: innodb-parameters-deprecated,  Prev: innodb-parameter-changes,  Up: innodb-parameter-changes

14.4.14.1 New Parameters
........................

Throughout the course of development, InnoDB 1.1 and its predecessor
the InnoDB Plugin introduced new configuration parameters. The
following table summarizes those parameters:

*InnoDB 1.1 New Parameter Summary*

Name           Cmd-Line                      Option File                   System Var                    Scope                                Dynamic                              Default
`innodb_adaptive_flushing'`YES'                         `YES'                         `YES'                         `GLOBAL'                             `YES'                                `TRUE'
`innodb_buffer_pool_instances'`YES'                         `YES'                         `YES'                         `GLOBAL'                             `YES'                                `TRUE'
`innodb_change_buffering'`YES'                         `YES'                         `YES'                         `GLOBAL'                             `YES'                                `inserts'
`innodb_file_format'`YES'                         `YES'                         `YES'                         `GLOBAL'                             `YES'                                `Antelope'
`innodb_file_format_check'`YES'                         `YES'                         `YES'                         `GLOBAL'                             `NO'                                 `1'
`innodb_file_format_max'`YES'                         `YES'                         `YES'                         `GLOBAL'                             `YES'                                `Antelope' for a new database; `Barracuda'
                                                                                                                                                                                   if any tables using that file format exist
                                                                                                                                                                                   in the database
`innodb_io_capacity'`YES'                         `YES'                         `YES'                         `GLOBAL'                             `YES'                                `200'
`innodb_old_blocks_pct'`YES'                         `YES'                         `YES'                         `GLOBAL'                             `YES'                                `37'
`innodb_old_blocks_time'`YES'                         `YES'                         `YES'                         `GLOBAL'                             `YES'                                `0'
`innodb_purge_batch_size'`YES'                         `YES'                         `YES'                         `GLOBAL'                             `YES'                                `0'
`innodb_purge_threads'`YES'                         `YES'                         `YES'                         `GLOBAL'                             `YES'                                `0'
`innodb_read_ahead_threshold'`YES'                         `YES'                         `YES'                         `GLOBAL'                             `YES'                                `56'
`innodb_read_io_threads'`YES'                         `YES'                         `YES'                         `GLOBAL'                             `NO'                                 `4'
`innodb_spin_wait_delay'`YES'                         `YES'                         `YES'                         `GLOBAL'                             `YES'                                `6'
`innodb_stats_sample_pages'`YES'                         `YES'                         `YES'                         `GLOBAL'                             `YES'                                `8'
`innodb_strict_mode'`YES'                         `YES'                         `YES'                         `GLOBAL|SESSION'                     `YES'                                `FALSE'
`innodb_use_native_aio'`YES'                         `YES'                         `YES'                         `GLOBAL'                             `NO'                                 `TRUE'
`innodb_use_sys_malloc'`YES'                         `YES'                         `YES'                         `GLOBAL'                             `NO'                                 `TRUE'
`innodb_write_io_threads'`YES'                         `YES'                         `YES'                         `GLOBAL'                             `NO'                                 `4'

   * *`innodb_adaptive_flushing'*

     Whether InnoDB uses a new algorithm to estimate the required rate
     of flushing. The default value is `TRUE'. This parameter was added
     in InnoDB storage engine 1.0.4. See *Note
     innodb-performance-adaptive_flushing:: for more information.

   * *`innodb_change_buffering'*

     Whether InnoDB performs insert buffering. The default value is
     `"inserts"' (buffer insert operations). This parameter was added
     in InnoDB storage engine 1.0.3. See *Note
     innodb-performance-change_buffering:: for more information.

   * *`innodb_file_format'*

     The default file format for new InnoDB tables. The default is
     Antelope. To enable support for table compression, change it to
     Barracuda. This parameter was added in InnoDB storage engine
     1.0.1. See *Note innodb-file-format-enabling:: for more
     information.

   * *`innodb_file_format_check'* and *`innodb_file_format_max'*

     Controls whether InnoDB performs file format compatibility
     checking when opening a database. The default value is
     `innodb-file-format-check=1', with `innodb_file_format_max' set to
     the highest format that is used in the database (either Barracuda
     or Antelope). See *Note innodb-file-format-compatibility-checking::
     for more information.

   * *`innodb_io_capacity'*

     The number of `I/O' operations that can be performed per second.
     The allowable value range is any number 100 or greater, and the
     default value is `200'. This parameter was added in InnoDB storage
     engine 1.0.4. To reproduce the earlier behavior, use a value of
     100. See *Note innodb-performance-thread_io_rate:: for more
     information.

   * *`innodb_old_blocks_pct'*

     Controls the desired percentage of `old' blocks in the LRU list of
     the buffer pool. The default value is `37' and the allowable value
     range is `5 to 95'. This parameter was added in InnoDB storage
     engine 1.0.5. See *Note innodb-performance-midpoint_insertion:: for
     more information.

   * *`innodb_old_blocks_time'*

     The time in milliseconds since the first access to a block during
     which it can be accessed again without being made `young'. The
     default value is `0' which means that blocks are moved to the
     `young' end of the LRU list at the first access.  This parameter
     was added in InnoDB storage engine 1.0.5. See *Note
     innodb-performance-midpoint_insertion:: for more information.

   * *`innodb_read_ahead_threshold'*

     Control the sensitivity of the linear read ahead. The allowable
     value range is `0' to `64' and the default value is `56'. This
     parameter was added in InnoDB storage engine 1.0.4. See *Note
     innodb-performance-read_ahead:: for more information.

   * *`innodb_read_io_threads'*

     The number of background `I/O' threads used for reads. The
     allowable value range is `1' to `64' and the default value is `4'.
     This parameter was added in InnoDB storage engine 1.0.4. See *Note
     innodb-performance-multiple_io_threads:: for more information.

   * *`innodb_spin_wait_delay'*

     Maximum delay between polling for a spin lock. The allowable value
     range is `0' (meaning unlimited) or positive integers and the
     default value is `6'. This parameter was added in InnoDB storage
     engine 1.0.4. See *Note innodb-performance-spin_lock_polling:: for
     more information.

   * *`innodb_stats_sample_pages'*

     The number of index pages to sample when calculating statistics.
     The allowable value range is `1-unlimited' and the default value is
     `8'. This parameter was added in InnoDB storage engine 1.0.2. See
     *Note innodb-other-changes-statistics-estimation:: for more
     information.

   * *`innodb_strict_mode'*

     Whether InnoDB raises error conditions in certain cases, rather
     than issuing a warning. This parameter was added in InnoDB storage
     engine 1.0.2. See *Note innodb-other-changes-strict-mode:: for more
     information.

   * *`innodb_use_sys_malloc'*

     Whether InnoDB uses its own memory allocator or an allocator of
     the operating system. The default value is `ON' (use an allocator
     of the underlying system). This parameter was added in InnoDB
     storage engine 1.0.3.  See *Note
     innodb-performance-use_sys_malloc:: for more information.

   * *`innodb_write_io_threads'*

     The number of background `I/O' threads used for writes. The
     allowable value range is `1' to `64' and the default value is `4'.
     This parameter was added in InnoDB storage engine 1.0.4. See *Note
     innodb-performance-multiple_io_threads:: for more information.


File: manual.info,  Node: innodb-parameters-deprecated,  Next: innodb-parameters-new-defaults,  Prev: innodb-parameters-new,  Up: innodb-parameter-changes

14.4.14.2 Deprecated Parameters
...............................

Beginning in InnoDB storage engine 1.0.4, the following configuration
parameter has been removed:

   * *`innodb_file_io_threads'
     (http://dev.mysql.com/doc/refman/5.1/en/innodb-parameters.html#sysvar_innodb_file_io_threads)*

     This parameter has been replaced by two new parameters
     `innodb_read_io_threads' and `innodb_write_io_threads'. See *Note
     innodb-performance-multiple_io_threads:: for more information.


File: manual.info,  Node: innodb-parameters-new-defaults,  Prev: innodb-parameters-deprecated,  Up: innodb-parameter-changes

14.4.14.3 Parameters with New Defaults
......................................

For better out-of-the-box performance, the following InnoDB
configuration parameters have new default values since MySQL 5.1:

*InnoDB Parameters with New Defaults*

Name           Old     New
               Default Default
`innodb_additional_mem_pool_size'`1MB'   `8MB'
`innodb_buffer_pool_size'`8MB'   `128MB'
`innodb_change_buffering'`inserts'`all'
`innodb_file_format_check'`ON'    `1'
`innodb_log_buffer_size'`1MB'   `8MB'
`innodb_max_dirty_pages_pct'`90'    `75'
`innodb_sync_spin_loops'`20'    `30'
`innodb_thread_concurrency'`8'     `0'


File: manual.info,  Node: myisam-storage-engine,  Next: memory-storage-engine,  Prev: innodb-5-5,  Up: storage-engines

14.5 The `MyISAM' Storage Engine
================================

* Menu:

* myisam-start::                 `MyISAM' Startup Options
* key-space::                    Space Needed for Keys
* myisam-table-formats::         `MyISAM' Table Storage Formats
* myisam-table-problems::        `MyISAM' Table Problems

Before MySQL 5.5.5, `MyISAM' is the default storage engine. (The
default was changed to `InnoDB' in MySQL 5.5.5.) `MyISAM' is based on
the older (and no longer available) `ISAM' storage engine but has many
useful extensions.

*`MyISAM' Storage Engine Features*

*Storage limits* 256TB    *Transactions*   No       *Locking         Table
                                                    granularity*     
*MVCC*           No       *Geospatial      Yes      *Geospatial      Yes
                          data type                 indexing         
                          support*                  support*         
*B-tree indexes* Yes      *T-tree indexes* No       *Hash indexes*   No
*Full-text       Yes      *Clustered       No       *Data caches*    No
search indexes*           indexes*                                   
*Index caches*   Yes      *Compressed      Yes      *Encrypted data  Yes
                          data*            CompressedImplemented in   
                                           MyISAM   the server (via  
                                           tables   encryption       
                                           are      functions),      
                                           supportedrather than in   
                                           only     the storage      
                                           when     engine.*         
                                           using                     
                                           the                       
                                           compressed                 
                                           row                       
                                           format.                   
                                           Tables                    
                                           using                     
                                           the                       
                                           compressed                 
                                           row                       
                                           format                    
                                           with                      
                                           MyISAM                    
                                           are                       
                                           read                      
                                           only.                     
*Cluster         No       *Replication     Yes      *Foreign key     No
database                  support                   support*         
support*                  Implemented in                             
                          the server,                                
                          rather than in                             
                          the storage                                
                          engine.*                                   
*Backup /        Yes      *Query cache     Yes      *Update          Yes
point-in-time             support*                  statistics for   
recovery                                            data dictionary* 
Implemented in                                                       
the server,                                                          
rather than in                                                       
the storage                                                          
engine.*                                                             

Each `MyISAM' table is stored on disk in three files. The files have
names that begin with the table name and have an extension to indicate
the file type. An `.frm' file stores the table format. The data file
has an `.MYD' (`MYData') extension. The index file has an `.MYI'
(`MYIndex') extension.

To specify explicitly that you want a `MyISAM' table, indicate that
with an `ENGINE' table option:

     CREATE TABLE t (i INT) ENGINE = MYISAM;

As of MySQL 5.5.5, it is normally necessary to use `ENGINE' to specify
the `MyISAM' storage engine because `InnoDB' is the default engine.
Before 5.5.5, this is unnecessary because `MyISAM' is the default
engine unless the default has been changed. To ensure that `MyISAM' is
used in situations where the default might have been changed, include
the `ENGINE' option explicitly.

You can check or repair `MyISAM' tables with the *Note `mysqlcheck':
mysqlcheck. client or *Note `myisamchk': myisamchk.  utility. You can
also compress `MyISAM' tables with *Note `myisampack': myisampack. to
take up much less space. See *Note mysqlcheck::, *Note myisamchk::, and
*Note myisampack::.

`MyISAM' tables have the following characteristics:

   * All data values are stored with the low byte first. This makes the
     data machine and operating system independent. The only
     requirements for binary portability are that the machine uses
     two's-complement signed integers and IEEE floating-point format.
     These requirements are widely used among mainstream machines.
     Binary compatibility might not be applicable to embedded systems,
     which sometimes have peculiar processors.

     There is no significant speed penalty for storing data low byte
     first; the bytes in a table row normally are unaligned and it
     takes little more processing to read an unaligned byte in order
     than in reverse order. Also, the code in the server that fetches
     column values is not time critical compared to other code.

   * All numeric key values are stored with the high byte first to
     permit better index compression.

   * Large files (up to 63-bit file length) are supported on file
     systems and operating systems that support large files.

   * There is a limit of (2^32)^2 (1.844E+19) rows in a `MyISAM' table.

   * The maximum number of indexes per `MyISAM' table is 64.

     The maximum number of columns per index is 16.

   * The maximum key length is 1000 bytes. This can also be changed by
     changing the source and recompiling. For the case of a key longer
     than 250 bytes, a larger key block size than the default of 1024
     bytes is used.

   * When rows are inserted in sorted order (as when you are using an
     `AUTO_INCREMENT' column), the index tree is split so that the high
     node only contains one key. This improves space utilization in the
     index tree.

   * Internal handling of one `AUTO_INCREMENT' column per table is
     supported. `MyISAM' automatically updates this column for *Note
     `INSERT': insert. and *Note `UPDATE': update. operations. This
     makes `AUTO_INCREMENT' columns faster (at least 10%).  Values at
     the top of the sequence are not reused after being deleted. (When
     an `AUTO_INCREMENT' column is defined as the last column of a
     multiple-column index, reuse of values deleted from the top of a
     sequence does occur.) The `AUTO_INCREMENT' value can be reset with
     *Note `ALTER TABLE': alter-table. or *Note `myisamchk': myisamchk.

   * Dynamic-sized rows are much less fragmented when mixing deletes
     with updates and inserts. This is done by automatically combining
     adjacent deleted blocks and by extending blocks if the next block
     is deleted.

   * `MyISAM' supports concurrent inserts: If a table has no free
     blocks in the middle of the data file, you can *Note `INSERT':
     insert. new rows into it at the same time that other threads are
     reading from the table. A free block can occur as a result of
     deleting rows or an update of a dynamic length row with more data
     than its current contents.  When all free blocks are used up
     (filled in), future inserts become concurrent again. See *Note
     concurrent-inserts::.

   * You can put the data file and index file in different directories
     on different physical devices to get more speed with the `DATA
     DIRECTORY' and `INDEX DIRECTORY' table options to *Note `CREATE
     TABLE': create-table. See *Note create-table::.

   * *Note `BLOB': blob. and *Note `TEXT': blob. columns can be indexed.

   * `NULL' values are permitted in indexed columns.  This takes 0 to 1
     bytes per key.

   * Each character column can have a different character set. See
     *Note charset::.

   * There is a flag in the `MyISAM' index file that indicates whether
     the table was closed correctly. If *Note `mysqld': mysqld. is
     started with the `--myisam-recover-options' option, `MyISAM'
     tables are automatically checked when opened, and are repaired if
     the table wasn't closed properly.

   * *Note `myisamchk': myisamchk. marks tables as checked if you run
     it with the `--update-state' option. *Note `myisamchk --fast':
     myisamchk. checks only those tables that don't have this mark.

   * *Note `myisamchk --analyze': myisamchk. stores statistics for
     portions of keys, as well as for entire keys.

   * *Note `myisampack': myisampack. can pack *Note `BLOB': blob. and
     *Note `VARCHAR': char. columns.

`MyISAM' also supports the following features:

   * Support for a true *Note `VARCHAR': char. type; a *Note `VARCHAR':
     char. column starts with a length stored in one or two bytes.

   * Tables with *Note `VARCHAR': char. columns may have fixed or
     dynamic row length.

   * The sum of the lengths of the *Note `VARCHAR': char. and *Note
     `CHAR': char. columns in a table may be up to 64KB.

   * Arbitrary length `UNIQUE' constraints.

* Additional Resources *

   * A forum dedicated to the `MyISAM' storage engine is available at
     `http://forums.mysql.com/list.php?21'.


File: manual.info,  Node: myisam-start,  Next: key-space,  Prev: myisam-storage-engine,  Up: myisam-storage-engine

14.5.1 `MyISAM' Startup Options
-------------------------------

The following options to *Note `mysqld': mysqld. can be used to change
the behavior of `MyISAM' tables. For additional information, see *Note
server-options::.

*`MyISAM' Option/Variable Reference*

Name           Cmd-Line    Option file System Var  Status Var  Var Scope   Dynamic
bulk_insert_buffer_sizeYes         Yes         Yes                     Both        Yes
concurrent_insertYes         Yes         Yes                     Global      Yes
delay-key-writeYes         Yes                                 Global      Yes
- _Variable_:                          Yes                     Global      Yes
delay_key_write                                                            
have_rtree_keys                        Yes                     Global      No
key_buffer_sizeYes         Yes         Yes                     Global      Yes
log-isam       Yes         Yes                                             
myisam-block-sizeYes         Yes                                             
myisam_data_pointer_sizeYes         Yes         Yes                     Global      Yes
myisam_max_sort_file_sizeYes         Yes         Yes                     Global      Yes
myisam_mmap_sizeYes         Yes         Yes                     Global      No
myisam-recover Yes         Yes                                             
- _Variable_:                                                              
myisam_recover_options                                                            
myisam-recover-optionsYes         Yes                                             
- _Variable_:                                                              
myisam_recover_options                                                            
myisam_recover_options                        Yes                     Global      No
myisam_repair_threadsYes         Yes         Yes                     Both        Yes
myisam_sort_buffer_sizeYes         Yes         Yes                     Both        Yes
myisam_stats_methodYes         Yes         Yes                     Both        Yes
myisam_use_mmapYes         Yes         Yes                     Global      Yes
skip-concurrent-insertYes         Yes                                             
- _Variable_:                                                              
concurrent_insert                                                            
tmp_table_size Yes         Yes         Yes                     Both        Yes

   * `--myisam-recover-options=MODE'

     Set the mode for automatic recovery of crashed `MyISAM' tables.

   * `--delay-key-write=ALL'

     Don't flush key buffers between writes for any `MyISAM' table.

     *Note*:

     If you do this, you should not access `MyISAM' tables from another
     program (such as from another MySQL server or with *Note
     `myisamchk': myisamchk.) when the tables are in use.  Doing so
     risks index corruption. Using `--external-locking' does not
     eliminate this risk.

The following system variables affect the behavior of `MyISAM' tables.
For additional information, see *Note server-system-variables::.

   * `bulk_insert_buffer_size'

     The size of the tree cache used in bulk insert optimization.

     *Note*:

     This is a limit _per thread_!

   * `myisam_max_sort_file_size'

     The maximum size of the temporary file that MySQL is permitted to
     use while re-creating a `MyISAM' index (during *Note `REPAIR
     TABLE': repair-table, *Note `ALTER TABLE': alter-table, or *Note
     `LOAD DATA INFILE': load-data.). If the file size would be larger
     than this value, the index is created using the key cache instead,
     which is slower. The value is given in bytes.

   * `myisam_sort_buffer_size'

     Set the size of the buffer used when recovering tables.

Automatic recovery is activated if you start *Note `mysqld': mysqld.
with the `--myisam-recover-options' option. In this case, when the
server opens a `MyISAM' table, it checks whether the table is marked as
crashed or whether the open count variable for the table is not 0 and
you are running the server with external locking disabled. If either of
these conditions is true, the following happens:

   * The server checks the table for errors.

   * If the server finds an error, it tries to do a fast table repair
     (with sorting and without re-creating the data file).

   * If the repair fails because of an error in the data file (for
     example, a duplicate-key error), the server tries again, this time
     re-creating the data file.

   * If the repair still fails, the server tries once more with the old
     repair option method (write row by row without sorting).  This
     method should be able to repair any type of error and has low disk
     space requirements.

If the recovery wouldn't be able to recover all rows from previously
completed statements and you didn't specify `FORCE' in the value of the
`--myisam-recover-options' option, automatic repair aborts with an
error message in the error log:

     Error: Couldn't repair table: test.g00pages

If you specify `FORCE', a warning like this is written instead:

     Warning: Found 344 of 354 rows when repairing ./test/g00pages

Note that if the automatic recovery value includes `BACKUP', the
recovery process creates files with names of the form
`TBL_NAME-DATETIME.BAK'.  You should have a `cron' script that
automatically moves these files from the database directories to backup
media.


File: manual.info,  Node: key-space,  Next: myisam-table-formats,  Prev: myisam-start,  Up: myisam-storage-engine

14.5.2 Space Needed for Keys
----------------------------

`MyISAM' tables use B-tree indexes. You can roughly calculate the size
for the index file as `(key_length+4)/0.67', summed over all keys. This
is for the worst case when all keys are inserted in sorted order and
the table doesn't have any compressed keys.

String indexes are space compressed. If the first index part is a
string, it is also prefix compressed. Space compression makes the index
file smaller than the worst-case figure if a string column has a lot of
trailing space or is a *Note `VARCHAR': char. column that is not always
used to the full length. Prefix compression is used on keys that start
with a string. Prefix compression helps if there are many strings with
an identical prefix.

In `MyISAM' tables, you can also prefix compress numbers by specifying
the `PACK_KEYS=1' table option when you create the table. Numbers are
stored with the high byte first, so this helps when you have many
integer keys that have an identical prefix.


File: manual.info,  Node: myisam-table-formats,  Next: myisam-table-problems,  Prev: key-space,  Up: myisam-storage-engine

14.5.3 `MyISAM' Table Storage Formats
-------------------------------------

* Menu:

* static-format::                Static (Fixed-Length) Table Characteristics
* dynamic-format::               Dynamic Table Characteristics
* compressed-format::            Compressed Table Characteristics

`MyISAM' supports three different storage formats. Two of them, fixed
and dynamic format, are chosen automatically depending on the type of
columns you are using. The third, compressed format, can be created
only with the *Note `myisampack': myisampack. utility (see *Note
myisampack::).

When you use *Note `CREATE TABLE': create-table. or *Note `ALTER
TABLE': alter-table. for a table that has no *Note `BLOB': blob. or
*Note `TEXT': blob. columns, you can force the table format to `FIXED'
or `DYNAMIC' with the `ROW_FORMAT' table option.

See *Note create-table::, for information about `ROW_FORMAT'.

You can decompress (unpack) compressed `MyISAM' tables using *Note
`myisamchk `--unpack'': myisamchk.; see *Note myisamchk::, for more
information.


File: manual.info,  Node: static-format,  Next: dynamic-format,  Prev: myisam-table-formats,  Up: myisam-table-formats

14.5.3.1 Static (Fixed-Length) Table Characteristics
....................................................

Static format is the default for `MyISAM' tables. It is used when the
table contains no variable-length columns (*Note `VARCHAR': char, *Note
`VARBINARY': binary-varbinary, *Note `BLOB': blob, or *Note `TEXT':
blob.). Each row is stored using a fixed number of bytes.

Of the three `MyISAM' storage formats, static format is the simplest
and most secure (least subject to corruption). It is also the fastest
of the on-disk formats due to the ease with which rows in the data file
can be found on disk: To look up a row based on a row number in the
index, multiply the row number by the row length to calculate the row
position. Also, when scanning a table, it is very easy to read a
constant number of rows with each disk read operation.

The security is evidenced if your computer crashes while the MySQL
server is writing to a fixed-format `MyISAM' file. In this case, *Note
`myisamchk': myisamchk. can easily determine where each row starts and
ends, so it can usually reclaim all rows except the partially written
one. Note that `MyISAM' table indexes can always be reconstructed based
on the data rows.

*Note*:

Fixed-length row format is only available for tables without *Note
`BLOB': blob. or *Note `TEXT': blob. columns. Creating a table with
these columns with an explicit `ROW_FORMAT' clause will not raise an
error or warning; the format specification will be ignored.

Static-format tables have these characteristics:

   * *Note `CHAR': char. and *Note `VARCHAR': char. columns are
     space-padded to the specified column width, although the column
     type is not altered.  *Note `BINARY': binary-varbinary. and *Note
     `VARBINARY': binary-varbinary. columns are padded with `0x00'
     bytes to the column width.

   * Very quick.

   * Easy to cache.

   * Easy to reconstruct after a crash, because rows are located in
     fixed positions.

   * Reorganization is unnecessary unless you delete a huge number of
     rows and want to return free disk space to the operating system.
     To do this, use *Note `OPTIMIZE TABLE': optimize-table. or *Note
     `myisamchk -r': myisamchk.

   * Usually require more disk space than dynamic-format tables.


File: manual.info,  Node: dynamic-format,  Next: compressed-format,  Prev: static-format,  Up: myisam-table-formats

14.5.3.2 Dynamic Table Characteristics
......................................

Dynamic storage format is used if a `MyISAM' table contains any
variable-length columns (*Note `VARCHAR': char, *Note `VARBINARY':
binary-varbinary, *Note `BLOB': blob, or *Note `TEXT': blob.), or if
the table was created with the `ROW_FORMAT=DYNAMIC' table option.

Dynamic format is a little more complex than static format because each
row has a header that indicates how long it is. A row can become
fragmented (stored in noncontiguous pieces) when it is made longer as a
result of an update.

You can use *Note `OPTIMIZE TABLE': optimize-table. or *Note `myisamchk
-r': myisamchk. to defragment a table. If you have fixed-length columns
that you access or change frequently in a table that also contains some
variable-length columns, it might be a good idea to move the
variable-length columns to other tables just to avoid fragmentation.

Dynamic-format tables have these characteristics:

   * All string columns are dynamic except those with a length less
     than four.

   * Each row is preceded by a bitmap that indicates which columns
     contain the empty string (for string columns) or zero (for numeric
     columns). Note that this does not include columns that contain
     `NULL' values. If a string column has a length of zero after
     trailing space removal, or a numeric column has a value of zero,
     it is marked in the bitmap and not saved to disk. Nonempty strings
     are saved as a length byte plus the string contents.

   * Much less disk space usually is required than for fixed-length
     tables.

   * Each row uses only as much space as is required. However, if a row
     becomes larger, it is split into as many pieces as are required,
     resulting in row fragmentation. For example, if you update a row
     with information that extends the row length, the row becomes
     fragmented. In this case, you may have to run *Note `OPTIMIZE
     TABLE': optimize-table. or *Note `myisamchk -r': myisamchk. from
     time to time to improve performance. Use *Note `myisamchk -ei':
     myisamchk. to obtain table statistics.

   * More difficult than static-format tables to reconstruct after a
     crash, because rows may be fragmented into many pieces and links
     (fragments) may be missing.

   * The expected row length for dynamic-sized rows is calculated using
     the following expression:

          3
          + (NUMBER OF COLUMNS + 7) / 8
          + (NUMBER OF CHAR COLUMNS)
          + (PACKED SIZE OF NUMERIC COLUMNS)
          + (LENGTH OF STRINGS)
          + (NUMBER OF NULL COLUMNS + 7) / 8

     There is a penalty of 6 bytes for each link. A dynamic row is
     linked whenever an update causes an enlargement of the row. Each
     new link is at least 20 bytes, so the next enlargement probably
     goes in the same link. If not, another link is created. You can
     find the number of links using *Note `myisamchk -ed': myisamchk.
     All links may be removed with *Note `OPTIMIZE TABLE':
     optimize-table. or *Note `myisamchk -r': myisamchk.


File: manual.info,  Node: compressed-format,  Prev: dynamic-format,  Up: myisam-table-formats

14.5.3.3 Compressed Table Characteristics
.........................................

Compressed storage format is a read-only format that is generated with
the *Note `myisampack': myisampack. tool.  Compressed tables can be
uncompressed with *Note `myisamchk': myisamchk.

Compressed tables have the following characteristics:

   * Compressed tables take very little disk space. This minimizes disk
     usage, which is helpful when using slow disks (such as CD-ROMs).

   * Each row is compressed separately, so there is very little access
     overhead. The header for a row takes up one to three bytes
     depending on the biggest row in the table. Each column is
     compressed differently. There is usually a different Huffman tree
     for each column. Some of the compression types are:

        * Suffix space compression.

        * Prefix space compression.

        * Numbers with a value of zero are stored using one bit.

        * If values in an integer column have a small range, the column
          is stored using the smallest possible type. For example, a
          *Note `BIGINT': integer-types. column (eight bytes) can be
          stored as a *Note `TINYINT': integer-types. column (one byte)
          if all its values are in the range from `-128' to `127'.

        * If a column has only a small set of possible values, the data
          type is converted to *Note `ENUM': enum.

        * A column may use any combination of the preceding compression
          types.

   * Can be used for fixed-length or dynamic-length rows.

*Note*:

While a compressed table is read only, and you cannot therefore update
or add rows in the table, DDL (Data Definition Language) operations are
still valid. For example, you may still use `DROP' to drop the table,
and *Note `TRUNCATE TABLE': truncate-table. to empty the table.


File: manual.info,  Node: myisam-table-problems,  Prev: myisam-table-formats,  Up: myisam-storage-engine

14.5.4 `MyISAM' Table Problems
------------------------------

* Menu:

* corrupted-myisam-tables::      Corrupted `MyISAM' Tables
* myisam-table-close::           Problems from Tables Not Being Closed Properly

The file format that MySQL uses to store data has been extensively
tested, but there are always circumstances that may cause database
tables to become corrupted. The following discussion describes how this
can happen and how to handle it.


File: manual.info,  Node: corrupted-myisam-tables,  Next: myisam-table-close,  Prev: myisam-table-problems,  Up: myisam-table-problems

14.5.4.1 Corrupted `MyISAM' Tables
..................................

Even though the `MyISAM' table format is very reliable (all changes to
a table made by an SQL statement are written before the statement
returns), you can still get corrupted tables if any of the following
events occur:

   * The *Note `mysqld': mysqld. process is killed in the middle of a
     write.

   * An unexpected computer shutdown occurs (for example, the computer
     is turned off).

   * Hardware failures.

   * You are using an external program (such as *Note `myisamchk':
     myisamchk.) to modify a table that is being modified by the server
     at the same time.

   * A software bug in the MySQL or `MyISAM' code.

Typical symptoms of a corrupt table are:

   * You get the following error while selecting data from the table:

          Incorrect key file for table: '...'. Try to repair it

   * Queries don't find rows in the table or return incomplete results.

You can check the health of a `MyISAM' table using the *Note `CHECK
TABLE': check-table. statement, and repair a corrupted `MyISAM' table
with *Note `REPAIR TABLE': repair-table. When *Note `mysqld': mysqld.
is not running, you can also check or repair a table with the *Note
`myisamchk': myisamchk. command.  See *Note check-table::, *Note
repair-table::, and *Note myisamchk::.

If your tables become corrupted frequently, you should try to determine
why this is happening. The most important thing to know is whether the
table became corrupted as a result of a server crash. You can verify
this easily by looking for a recent `restarted mysqld' message in the
error log. If there is such a message, it is likely that table
corruption is a result of the server dying. Otherwise, corruption may
have occurred during normal operation. This is a bug. You should try to
create a reproducible test case that demonstrates the problem. See
*Note crashing::, and *Note porting::.


File: manual.info,  Node: myisam-table-close,  Prev: corrupted-myisam-tables,  Up: myisam-table-problems

14.5.4.2 Problems from Tables Not Being Closed Properly
.......................................................

Each `MyISAM' index file (`.MYI' file) has a counter in the header that
can be used to check whether a table has been closed properly. If you
get the following warning from *Note `CHECK TABLE': check-table. or
*Note `myisamchk': myisamchk, it means that this counter has gone out
of sync:

     clients are using or haven't closed the table properly

This warning doesn't necessarily mean that the table is corrupted, but
you should at least check the table.

The counter works as follows:

   * The first time a table is updated in MySQL, a counter in the
     header of the index files is incremented.

   * The counter is not changed during further updates.

   * When the last instance of a table is closed (because a *Note
     `FLUSH TABLES': flush. operation was performed or because there is
     no room in the table cache), the counter is decremented if the
     table has been updated at any point.

   * When you repair the table or check the table and it is found to be
     okay, the counter is reset to zero.

   * To avoid problems with interaction with other processes that might
     check the table, the counter is not decremented on close if it was
     zero.

In other words, the counter can become incorrect only under these
conditions:

   * A `MyISAM' table is copied without first issuing *Note `LOCK
     TABLES': lock-tables. and *Note `FLUSH TABLES': flush.

   * MySQL has crashed between an update and the final close.  (Note
     that the table may still be okay, because MySQL always issues
     writes for everything between each statement.)

   * A table was modified by *Note `myisamchk --recover': myisamchk. or
     *Note `myisamchk --update-state': myisamchk. at the same time that
     it was in use by *Note `mysqld': mysqld.

   * Multiple *Note `mysqld': mysqld. servers are using the table and
     one server performed a *Note `REPAIR TABLE': repair-table. or
     *Note `CHECK TABLE': check-table. on the table while it was in use
     by another server. In this setup, it is safe to use *Note `CHECK
     TABLE': check-table, although you might get the warning from other
     servers. However, *Note `REPAIR TABLE': repair-table. should be
     avoided because when one server replaces the data file with a new
     one, this is not known to the other servers.

     In general, it is a bad idea to share a data directory among
     multiple servers. See *Note multiple-servers::, for additional
     discussion.


File: manual.info,  Node: memory-storage-engine,  Next: csv-storage-engine,  Prev: myisam-storage-engine,  Up: storage-engines

14.6 The `MEMORY' Storage Engine
================================

The `MEMORY' storage engine (formerly known as `HEAP') creates
special-purpose tables with contents that are stored in memory. Because
the data is vulnerable to crashes, hardware issues, or power outages,
only use these tables as temporary work areas or read-only caches for
data pulled from other tables.

*`MEMORY' Storage Engine Features*

*Storage limits* RAM      *Transactions*   No       *Locking         Table
                                                    granularity*     
*MVCC*           No       *Geospatial      No       *Geospatial      No
                          data type                 indexing         
                          support*                  support*         
*B-tree indexes* Yes      *T-tree indexes* No       *Hash indexes*   Yes
*Full-text       No       *Clustered       No       *Data caches*    N/A
search indexes*           indexes*                                   
*Index caches*   N/A      *Compressed      No       *Encrypted data  Yes
                          data*                     Implemented in   
                                                    the server (via  
                                                    encryption       
                                                    functions),      
                                                    rather than in   
                                                    the storage      
                                                    engine.*         
*Cluster         No       *Replication     Yes      *Foreign key     No
database                  support                   support*         
support*                  Implemented in                             
                          the server,                                
                          rather than in                             
                          the storage                                
                          engine.*                                   
*Backup /        Yes      *Query cache     Yes      *Update          Yes
point-in-time             support*                  statistics for   
recovery                                            data dictionary* 
Implemented in                                                       
the server,                                                          
rather than in                                                       
the storage                                                          
engine.*                                                             

When to Use `MEMORY' or MySQL Cluster

Developers looking to deploy applications that use the `MEMORY' storage
engine for important, highly available, or frequently updated data
should consider whether MySQL Cluster is a better choice. A typical use
case for the `MEMORY' engine involves these characteristics:

   * Operations involving transient, non-critical data such as session
     management or caching. When the MySQL server halts or restarts,
     the data in `MEMORY' tables is lost.

   * In-memory storage for fast access and low latency. Data volume can
     fit entirely in memory without causing the operating system to
     swap out virtual memory pages.

   * A read-only or read-mostly data access pattern (limited updates).

MySQL Cluster offers the same features as the `MEMORY' engine with
higher performance levels, and provides additional features not
available with `MEMORY':

   * Row-level locking and multiple-thread operation for low contention
     between clients.

   * Scalability even with statement mixes that include writes.

   * Optional disk-backed operation for data durability.

   * Shared-nothing architecture and multiple-host operation with no
     single point of failure, enabling 99.999% availability.

   * Automatic data distribution across nodes; application developers
     need not craft custom sharding or partitioning solutions.

   * Support for variable-length data types (including *Note `BLOB':
     blob. and *Note `TEXT': blob.) not supported by `MEMORY'.

For a white paper with more detailed comparison of the `MEMORY' storage
engine and MySQL Cluster, see Scaling Web Services with MySQL Cluster:
An Alternative to the MySQL Memory Storage Engine
(http://www.mysql.com/why-mysql/white-papers/mysql-wp_cluster-7.0_Cluster_MEMORY.php).
This white paper includes a performance study of the two technologies
and a step-by-step guide describing how existing `MEMORY' users can
migrate to MySQL Cluster.

* Performance Characteristics *

`MEMORY' performance is constrained by contention resulting from
single-thread execution and table lock overhead when processing
updates. This limits scalability when load increases, particularly for
statement mixes that include writes.

Despite the in-memory processing for `MEMORY' tables, they are not
necessarily faster than *Note `InnoDB': innodb-storage-engine. tables
on a busy server, for general-purpose queries, or under a read/write
workload. In particular, the table locking involved with performing
updates can slow down concurrent usage of `MEMORY' tables from multiple
sessions.

Depending on the kinds of queries performed on a `MEMORY' table, you
might create indexes as either the default hash data structure (for
looking up single values based on a unique key), or a general-purpose
B-tree data structure (for all kinds of queries involving equality,
inequality, or range operators such as less than or greater than). The
following sections illustrate the syntax for creating both kinds of
indexes. A common performance issue is using the default hash indexes
in workloads where B-tree indexes are more efficient.

* Physical Characteristics of `MEMORY' Tables *

The `MEMORY' storage engine associates each table with one disk file,
which stores the table definition (not the data). The file name begins
with the table name and has an extension of `.frm'.

`MEMORY' tables have the following characteristics:

   * Space for `MEMORY' tables is allocated in small blocks. Tables use
     100% dynamic hashing for inserts. No overflow area or extra key
     space is needed. No extra space is needed for free lists. Deleted
     rows are put in a linked list and are reused when you insert new
     data into the table.  `MEMORY' tables also have none of the
     problems commonly associated with deletes plus inserts in hashed
     tables.

   * `MEMORY' tables use a fixed-length row-storage format.
     Variable-length types such as *Note `VARCHAR': char. are stored
     using a fixed length.

   * `MEMORY' tables cannot contain *Note `BLOB': blob. or *Note
     `TEXT': blob. columns.

   * `MEMORY' includes support for `AUTO_INCREMENT' columns.

   * Non-`TEMPORARY' `MEMORY' tables are shared among all clients, just
     like any other non-`TEMPORARY' table.

* DDL Operations for `MEMORY' Tables *

To create a `MEMORY' table, specify the clause `ENGINE=MEMORY' on the
*Note `CREATE TABLE': create-table. statement.

     CREATE TABLE t (i INT) ENGINE = MEMORY;

As indicated by the engine name, `MEMORY' tables are stored in memory.
They use hash indexes by default, which makes them very fast for
single-value lookups, and very useful for creating temporary tables.
However, when the server shuts down, all rows stored in `MEMORY' tables
are lost. The tables themselves continue to exist because their
definitions are stored in `.frm' files on disk, but they are empty when
the server restarts.

This example shows how you might create, use, and remove a `MEMORY'
table:

     mysql> CREATE TABLE test ENGINE=MEMORY
         ->     SELECT ip,SUM(downloads) AS down
         ->     FROM log_table GROUP BY ip;
     mysql> SELECT COUNT(ip),AVG(down) FROM test;
     mysql> DROP TABLE test;

The maximum size of `MEMORY' tables is limited by the
`max_heap_table_size' system variable, which has a default value of
16MB. To enforce different size limits for `MEMORY' tables, change the
value of this variable. The value in effect for *Note `CREATE TABLE':
create-table, or a subsequent *Note `ALTER TABLE': alter-table. or
*Note `TRUNCATE TABLE': truncate-table, is the value used for the life
of the table. A server restart also sets the maximum size of existing
`MEMORY' tables to the global `max_heap_table_size' value. You can set
the size for individual tables as described later in this section.

* Indexes *

The `MEMORY' storage engine supports both `HASH' and `BTREE' indexes.
You can specify one or the other for a given index by adding a `USING'
clause as shown here:

     CREATE TABLE lookup
         (id INT, INDEX USING HASH (id))
         ENGINE = MEMORY;
     CREATE TABLE lookup
         (id INT, INDEX USING BTREE (id))
         ENGINE = MEMORY;

For general characteristics of B-tree and hash indexes, see *Note
mysql-indexes::.

`MEMORY' tables can have up to 64 indexes per table, 16 columns per
index and a maximum key length of 3072 bytes.

If a `MEMORY' table hash index has a high degree of key duplication
(many index entries containing the same value), updates to the table
that affect key values and all deletes are significantly slower. The
degree of this slowdown is proportional to the degree of duplication
(or, inversely proportional to the index cardinality). You can use a
`BTREE' index to avoid this problem.

`MEMORY' tables can have nonunique keys. (This is an uncommon feature
for implementations of hash indexes.)

Columns that are indexed can contain `NULL' values.

* User-Created and Temporary Tables *

`MEMORY' table contents are stored in memory, which is a property that
`MEMORY' tables share with internal temporary tables that the server
creates on the fly while processing queries. However, the two types of
tables differ in that `MEMORY' tables are not subject to storage
conversion, whereas internal temporary tables are:

   * If an internal temporary table becomes too large, the server
     automatically converts it to on-disk storage, as described in
     *Note internal-temporary-tables::.

   * User-created `MEMORY' tables are never converted to disk tables.

* Loading Data *

To populate a `MEMORY' table when the MySQL server starts, you can use
the `--init-file' option. For example, you can put statements such as
*Note `INSERT INTO ... SELECT': insert-select. or *Note `LOAD DATA
INFILE': load-data. into this file to load the table from a persistent
data source. See *Note server-options::, and *Note load-data::.

For loading data into `MEMORY' tables accessed by other sessions
concurrently, `MEMORY' supports *Note `INSERT DELAYED': insert-delayed.
See *Note insert-delayed::.

* `MEMORY' Tables and Replication *

A server's `MEMORY' tables become empty when it is shut down and
restarted. If the server is a replication master, its slaves are not
aware that these tables have become empty, so you see out-of-date
content if you select data from the tables on the slaves. To
synchronize master and slave `MEMORY' tables, when a `MEMORY' table is
used on a master for the first time since it was started, a *Note
`DELETE': delete. statement is written to the master's binary log, to
empty the table on the slaves also. The slave still has outdated data
in the table during the interval between the master's restart and its
first use of the table. To avoid this interval when a direct query to
the slave could return stale data, use the `--init-file' option to
populate the `MEMORY' table on the master at startup.

* Managing Memory Use *

The server needs sufficient memory to maintain all `MEMORY' tables that
are in use at the same time.

Memory is not reclaimed if you delete individual rows from a `MEMORY'
table. Memory is reclaimed only when the entire table is deleted.
Memory that was previously used for deleted rows is re-used for new
rows within the same table. To free all the memory used by a `MEMORY'
table when you no longer require its contents, execute *Note `DELETE':
delete.  or *Note `TRUNCATE TABLE': truncate-table. to remove all rows,
or remove the table altogether using *Note `DROP TABLE': drop-table. To
free up the memory used by deleted rows, use `ALTER TABLE
ENGINE=MEMORY' to force a table rebuild.

The memory needed for one row in a `MEMORY' table is calculated using
the following expression:

     SUM_OVER_ALL_BTREE_KEYS(MAX_LENGTH_OF_KEY + sizeof(char*) * 4)
     + SUM_OVER_ALL_HASH_KEYS(sizeof(char*) * 2)
     + ALIGN(LENGTH_OF_ROW+1, sizeof(char*))

`ALIGN()' represents a round-up factor to cause the row length to be an
exact multiple of the `char' pointer size. `sizeof(char*)' is 4 on
32-bit machines and 8 on 64-bit machines.

As mentioned earlier, the `max_heap_table_size' system variable sets
the limit on the maximum size of `MEMORY' tables. To control the
maximum size for individual tables, set the session value of this
variable before creating each table. (Do not change the global
`max_heap_table_size' value unless you intend the value to be used for
`MEMORY' tables created by all clients.) The following example creates
two `MEMORY' tables, with a maximum size of 1MB and 2MB, respectively:

     mysql> SET max_heap_table_size = 1024*1024;
     Query OK, 0 rows affected (0.00 sec)

     mysql> CREATE TABLE t1 (id INT, UNIQUE(id)) ENGINE = MEMORY;
     Query OK, 0 rows affected (0.01 sec)

     mysql> SET max_heap_table_size = 1024*1024*2;
     Query OK, 0 rows affected (0.00 sec)

     mysql> CREATE TABLE t2 (id INT, UNIQUE(id)) ENGINE = MEMORY;
     Query OK, 0 rows affected (0.00 sec)

Both tables revert to the server's global `max_heap_table_size' value
if the server restarts.

You can also specify a `MAX_ROWS' table option in *Note `CREATE TABLE':
create-table. statements for `MEMORY' tables to provide a hint about
the number of rows you plan to store in them. This does not enable the
table to grow beyond the `max_heap_table_size' value, which still acts
as a constraint on maximum table size. For maximum flexibility in being
able to use `MAX_ROWS', set `max_heap_table_size' at least as high as
the value to which you want each `MEMORY' table to be able to grow.

* Additional Resources *

A forum dedicated to the `MEMORY' storage engine is available at
`http://forums.mysql.com/list.php?92'.


File: manual.info,  Node: csv-storage-engine,  Next: archive-storage-engine,  Prev: memory-storage-engine,  Up: storage-engines

14.7 The `CSV' Storage Engine
=============================

* Menu:

* se-csv-repair::                Repairing and Checking CSV Tables
* se-csv-limitations::           CSV Limitations

The `CSV' storage engine stores data in text files using
comma-separated values format.

The `CSV' storage engine is always compiled into the MySQL server.

To examine the source for the `CSV' engine, look in the `storage/csv'
directory of a MySQL source distribution.

When you create a `CSV' table, the server creates a table format file
in the database directory. The file begins with the table name and has
an `.frm' extension. The storage engine also creates a data file. Its
name begins with the table name and has a `.CSV' extension. The data
file is a plain text file. When you store data into the table, the
storage engine saves it into the data file in comma-separated values
format.

     mysql> CREATE TABLE test (i INT NOT NULL, c CHAR(10) NOT NULL)
         -> ENGINE = CSV;
     Query OK, 0 rows affected (0.12 sec)

     mysql> INSERT INTO test VALUES(1,'record one'),(2,'record two');
     Query OK, 2 rows affected (0.00 sec)
     Records: 2  Duplicates: 0  Warnings: 0

     mysql> SELECT * FROM test;
     +------+------------+
     | i    | c          |
     +------+------------+
     |    1 | record one |
     |    2 | record two |
     +------+------------+
     2 rows in set (0.00 sec)

Creating a CSV table also creates a corresponding Metafile that stores
the state of the table and the number of rows that exist in the table.
The name of this file is the same as the name of the table with the
extension `CSM'.

If you examine the `test.CSV' file in the database directory created by
executing the preceding statements, its contents should look like this:

     "1","record one"
     "2","record two"

This format can be read, and even written, by spreadsheet applications
such as Microsoft Excel or StarOffice Calc.


File: manual.info,  Node: se-csv-repair,  Next: se-csv-limitations,  Prev: csv-storage-engine,  Up: csv-storage-engine

14.7.1 Repairing and Checking CSV Tables
----------------------------------------

The CSV storage engines supports the `CHECK' and `REPAIR' statements to
verify and if possible repair a damaged CSV table.

When running the `CHECK' statement, the CSV file will be checked for
validity by looking for the correct field separators, escaped fields
(matching or missing quotation marks), the correct number of fields
compared to the table definition and the existence of a corresponding
CSV metafile. The first invalid row discovered will report an error.
Checking a valid table produces output like that shown below:

     mysql> check table csvtest;
     +--------------+-------+----------+----------+
     | Table        | Op    | Msg_type | Msg_text |
     +--------------+-------+----------+----------+
     | test.csvtest | check | status   | OK       |
     +--------------+-------+----------+----------+
     1 row in set (0.00 sec)

A check on a corrupted table returns a fault:

     mysql> check table csvtest;
     +--------------+-------+----------+----------+
     | Table        | Op    | Msg_type | Msg_text |
     +--------------+-------+----------+----------+
     | test.csvtest | check | error    | Corrupt  |
     +--------------+-------+----------+----------+
     1 row in set (0.01 sec)

If the check fails, the table is marked as crashed (corrupt). Once a
table has been marked as corrupt, it is automatically repaired when you
next run `CHECK' or execute a *Note `SELECT': select. statement. The
corresponding corrupt status and new status will be displayed when
running `CHECK':

     mysql> check table csvtest;
     +--------------+-------+----------+----------------------------+
     | Table        | Op    | Msg_type | Msg_text                   |
     +--------------+-------+----------+----------------------------+
     | test.csvtest | check | warning  | Table is marked as crashed |
     | test.csvtest | check | status   | OK                         |
     +--------------+-------+----------+----------------------------+
     2 rows in set (0.08 sec)

To repair a table you can use `REPAIR', this copies as many valid rows
from the existing CSV data as possible, and then replaces the existing
CSV file with the recovered rows.  Any rows beyond the corrupted data
are lost.

     mysql> repair table csvtest;
     +--------------+--------+----------+----------+
     | Table        | Op     | Msg_type | Msg_text |
     +--------------+--------+----------+----------+
     | test.csvtest | repair | status   | OK       |
     +--------------+--------+----------+----------+
     1 row in set (0.02 sec)

*Warning*:

Note that during repair, only the rows from the CSV file up to the
first damaged row are copied to the new table. All other rows from the
first damaged row to the end of the table are removed, even valid rows.


File: manual.info,  Node: se-csv-limitations,  Prev: se-csv-repair,  Up: csv-storage-engine

14.7.2 CSV Limitations
----------------------

The `CSV' storage engine does not support indexing.

Partitioning is not supported for tables using the `CSV' storage engine.

All tables that you create using the `CSV' storage engine must have the
`NOT NULL' attribute on all columns. However, for backward
compatibility, you can continue to use tables with nullable columns
that were created in previous MySQL releases. (Bug #32050)


File: manual.info,  Node: archive-storage-engine,  Next: blackhole-storage-engine,  Prev: csv-storage-engine,  Up: storage-engines

14.8 The `ARCHIVE' Storage Engine
=================================

The `ARCHIVE' storage engine is used for storing large amounts of data
without indexes in a very small footprint.

*`ARCHIVE' Storage Engine Features*

*Storage limits* None     *Transactions*   No       *Locking         Table
                                                    granularity*     
*MVCC*           No       *Geospatial      Yes      *Geospatial      No
                          data type                 indexing         
                          support*                  support*         
*B-tree indexes* No       *T-tree indexes* No       *Hash indexes*   No
*Full-text       No       *Clustered       No       *Data caches*    No
search indexes*           indexes*                                   
*Index caches*   No       *Compressed      Yes      *Encrypted data  Yes
                          data*                     Implemented in   
                                                    the server (via  
                                                    encryption       
                                                    functions),      
                                                    rather than in   
                                                    the storage      
                                                    engine.*         
*Cluster         No       *Replication     Yes      *Foreign key     No
database                  support                   support*         
support*                  Implemented in                             
                          the server,                                
                          rather than in                             
                          the storage                                
                          engine.*                                   
*Backup /        Yes      *Query cache     Yes      *Update          Yes
point-in-time             support*                  statistics for   
recovery                                            data dictionary* 
Implemented in                                                       
the server,                                                          
rather than in                                                       
the storage                                                          
engine.*                                                             

The `ARCHIVE' storage engine is included in MySQL binary distributions.
To enable this storage engine if you build MySQL from source, invoke
`CMake' with the `-DWITH_ARCHIVE_STORAGE_ENGINE' option.

To examine the source for the `ARCHIVE' engine, look in the
`storage/archive' directory of a MySQL source distribution.

You can check whether the `ARCHIVE' storage engine is available with
the *Note `SHOW ENGINES': show-engines.  statement.

When you create an `ARCHIVE' table, the server creates a table format
file in the database directory. The file begins with the table name and
has an `.frm' extension. The storage engine creates other files, all
having names beginning with the table name. The data file has an
extension of `.ARZ'. An `.ARN' file may appear during optimization
operations.

The `ARCHIVE' engine supports *Note `INSERT': insert. and *Note
`SELECT': select, but not *Note `DELETE': delete, *Note `REPLACE':
replace, or *Note `UPDATE': update. It does support `ORDER BY'
operations, *Note `BLOB': blob. columns, and basically all but spatial
data types (see *Note mysql-spatial-datatypes::).  The `ARCHIVE' engine
uses row-level locking.

The `ARCHIVE' engine supports the `AUTO_INCREMENT' column attribute. The
`AUTO_INCREMENT' column can have either a unique or nonunique index.
Attempting to create an index on any other column results in an error.
The `ARCHIVE' engine also supports the `AUTO_INCREMENT' table option in
*Note `CREATE TABLE': create-table. and *Note `ALTER TABLE':
alter-table. statements to specify the initial sequence value for a new
table or reset the sequence value for an existing table, respectively.

The `ARCHIVE' engine ignores *Note `BLOB': blob. columns if they are not
requested and scans past them while reading.

*Storage:* Rows are compressed as they are inserted. The `ARCHIVE'
engine uses `zlib' lossless data compression (see
`http://www.zlib.net/'). You can use *Note `OPTIMIZE TABLE':
optimize-table. to analyze the table and pack it into a smaller format
(for a reason to use *Note `OPTIMIZE TABLE': optimize-table, see later
in this section). The engine also supports *Note `CHECK TABLE':
check-table. There are several types of insertions that are used:

   * An *Note `INSERT': insert. statement just pushes rows into a
     compression buffer, and that buffer flushes as necessary. The
     insertion into the buffer is protected by a lock.  A *Note
     `SELECT': select. forces a flush to occur, unless the only
     insertions that have come in were *Note `INSERT DELAYED':
     insert-delayed. (those flush as necessary). See *Note
     insert-delayed::.

   * A bulk insert is visible only after it completes, unless other
     inserts occur at the same time, in which case it can be seen
     partially. A *Note `SELECT': select. never causes a flush of a
     bulk insert unless a normal insert occurs while it is loading.

*Retrieval*: On retrieval, rows are uncompressed on demand; there is no
row cache. A *Note `SELECT': select. operation performs a complete
table scan: When a *Note `SELECT': select. occurs, it finds out how
many rows are currently available and reads that number of rows. *Note
`SELECT': select. is performed as a consistent read. Note that lots of
*Note `SELECT': select. statements during insertion can deteriorate the
compression, unless only bulk or delayed inserts are used. To achieve
better compression, you can use *Note `OPTIMIZE TABLE': optimize-table.
or *Note `REPAIR TABLE': repair-table. The number of rows in `ARCHIVE'
tables reported by *Note `SHOW TABLE STATUS': show-table-status. is
always accurate.  See *Note optimize-table::, *Note repair-table::, and
*Note show-table-status::.

* Additional Resources *

   * A forum dedicated to the `ARCHIVE' storage engine is available at
     `http://forums.mysql.com/list.php?112'.


File: manual.info,  Node: blackhole-storage-engine,  Next: merge-storage-engine,  Prev: archive-storage-engine,  Up: storage-engines

14.9 The `BLACKHOLE' Storage Engine
===================================

The `BLACKHOLE' storage engine acts as a `black hole' that accepts data
but throws it away and does not store it. Retrievals always return an
empty result:

     mysql> CREATE TABLE test(i INT, c CHAR(10)) ENGINE = BLACKHOLE;
     Query OK, 0 rows affected (0.03 sec)

     mysql> INSERT INTO test VALUES(1,'record one'),(2,'record two');
     Query OK, 2 rows affected (0.00 sec)
     Records: 2  Duplicates: 0  Warnings: 0

     mysql> SELECT * FROM test;
     Empty set (0.00 sec)

To enable the `BLACKHOLE' storage engine if you build MySQL from
source, invoke `CMake' with the `-DWITH_BLACKHOLE_STORAGE_ENGINE'
option.

To examine the source for the `BLACKHOLE' engine, look in the `sql'
directory of a MySQL source distribution.

When you create a `BLACKHOLE' table, the server creates a table format
file in the database directory. The file begins with the table name and
has an `.frm' extension. There are no other files associated with the
table.

The `BLACKHOLE' storage engine supports all kinds of indexes. That is,
you can include index declarations in the table definition.

You can check whether the `BLACKHOLE' storage engine is available with
the *Note `SHOW ENGINES': show-engines. statement.

Inserts into a `BLACKHOLE' table do not store any data, but if
statement based binary logging is enabled, the SQL statements are
logged and replicated to slave servers. This can be useful as a
repeater or filter mechanism.

*Note*:

When using the row based format for the binary log, updates and deletes
are skipped, and neither logged nor applied. For this reason, you
should use STATEMENT for the binary logging format, and not ROW or
MIXED.

Suppose that your application requires slave-side filtering rules, but
transferring all binary log data to the slave first results in too much
traffic. In such a case, it is possible to set up on the master host a
`dummy' slave process whose default storage engine is `BLACKHOLE',
depicted as follows:

Replication using `BLACKHOLE' for filtering

The master writes to its binary log. The `dummy' *Note `mysqld':
mysqld. process acts as a slave, applying the desired combination of
`replicate-do-*' and `replicate-ignore-*' rules, and writes a new,
filtered binary log of its own. (See *Note replication-options::.) This
filtered log is provided to the slave.

The dummy process does not actually store any data, so there is little
processing overhead incurred by running the additional *Note `mysqld':
mysqld. process on the replication master host.  This type of setup can
be repeated with additional replication slaves.

*Note `INSERT': insert. triggers for `BLACKHOLE' tables work as
expected. However, because the `BLACKHOLE' table does not actually
store any data, *Note `UPDATE': update. and *Note `DELETE': delete.
triggers are not activated: The `FOR EACH ROW' clause in the trigger
definition does not apply because there are no rows.

Other possible uses for the `BLACKHOLE' storage engine include:

   * Verification of dump file syntax.

   * Measurement of the overhead from binary logging, by comparing
     performance using `BLACKHOLE' with and without binary logging
     enabled.

   * `BLACKHOLE' is essentially a `no-op' storage engine, so it could
     be used for finding performance bottlenecks not related to the
     storage engine itself.

The `BLACKHOLE' engine is transaction-aware, in the sense that
committed transactions are written to the binary log and rolled-back
transactions are not.

*Blackhole Engine and Auto Increment Columns*

The Blackhole engine is a no-op engine. Any operations performed on a
table using Blackhole will have no effect. This should be born in mind
when considering the behavior of primary key columns that auto
increment. The engine will not automatically increment field values,
and does not retain auto increment field state. This has important
implications in replication.

Consider the following replication scenario where all three of the
following conditions apply:

  1. On a master server there is a blackhole table with an auto
     increment field that is a primary key.

  2. On a slave the same table exists but using the MyISAM engine.

  3. Inserts are performed into the master's table without explicitly
     setting the auto increment value in the `INSERT' statement itself
     or through using a `SET INSERT_ID' statement.

In this scenario replication will fail with a duplicate entry error on
the primary key column.

In statement based replication, the value of `INSERT_ID' in the context
event will always be the same. Replication will therefore fail due to
trying insert a row with a duplicate value for a primary key column.

In row based replication, the value that the engine returns for the row
always be the same for each insert. This will result in the slave
attempting to replay two insert log entries using the same value for
the primary key column, and so replication will fail.

*Column Filtering*

When using row-based replication, (`binlog_format=ROW'), a slave where
the last columns are missing from a table is supported, as described in
the section *Note replication-features-differing-tables::.

This filtering works on the slave side, that is, the columns are copied
to the slave before they are filtered out. There are at least two cases
where it is not desirable to copy the columns to the slave:

  1. If the data is confidential, so the slave server should not have
     access to it.

  2. If the master has many slaves, filtering before sending to the
     slaves may reduce network traffic.

Master column filtering can be achieved using the `BLACKHOLE' engine.
This is carried out in a way similar to how master table filtering is
achieved - by using the `BLACKHOLE' engine and the
`--replicate-do-table' or `--replicate-ignore-table' option.

The setup for the master is:

     CREATE TABLE t1 (public_col_1, ..., public_col_N,
                      secret_col_1, ..., secret_col_M) ENGINE=MyISAM;

The setup for the trusted slave is:

     CREATE TABLE t1 (public_col_1, ..., public_col_N) ENGINE=BLACKHOLE;

The setup for the untrusted slave is:

     CREATE TABLE t1 (public_col_1, ..., public_col_N) ENGINE=MyISAM;


File: manual.info,  Node: merge-storage-engine,  Next: federated-storage-engine,  Prev: blackhole-storage-engine,  Up: storage-engines

14.10 The `MERGE' Storage Engine
================================

* Menu:

* merge-table-advantages::       `MERGE' Table Advantages and Disadvantages
* merge-table-problems::         `MERGE' Table Problems

The `MERGE' storage engine, also known as the `MRG_MyISAM' engine, is a
collection of identical `MyISAM' tables that can be used as one.
`Identical' means that all tables have identical column and index
information. You cannot merge `MyISAM' tables in which the columns are
listed in a different order, do not have exactly the same columns, or
have the indexes in different order. However, any or all of the
`MyISAM' tables can be compressed with *Note `myisampack': myisampack.
See *Note myisampack::. Differences in table options such as
`AVG_ROW_LENGTH', `MAX_ROWS', or `PACK_KEYS' do not matter.

An alternative to a `MERGE' table is a partitioned table, which stores
partitions of a single table in separate files.  Partitioning enables
some operations to be performed more efficiently and is not limited to
the `MyISAM' storage engine. For more information, see *Note
partitioning::.

When you create a `MERGE' table, MySQL creates two files on disk. The
files have names that begin with the table name and have an extension
to indicate the file type. An `.frm' file stores the table format, and
an `.MRG' file contains the names of the underlying `MyISAM' tables
that should be used as one. The tables do not have to be in the same
database as the `MERGE' table.

You can use *Note `SELECT': select, *Note `DELETE': delete, *Note
`UPDATE': update, and *Note `INSERT': insert. on `MERGE' tables. You
must have `SELECT', `DELETE', and `UPDATE' privileges on the `MyISAM'
tables that you map to a `MERGE' table.

*Note*:

The use of `MERGE' tables entails the following security issue: If a
user has access to `MyISAM' table T, that user can create a `MERGE'
table M that accesses T. However, if the user's privileges on T are
subsequently revoked, the user can continue to access T by doing so
through M.

Use of *Note `DROP TABLE': drop-table. with a `MERGE' table drops only
the `MERGE' specification. The underlying tables are not affected.

To create a `MERGE' table, you must specify a `UNION=(LIST-OF-TABLES)'
option that indicates which `MyISAM' tables to use.  You can optionally
specify an `INSERT_METHOD' option to control how inserts into the
`MERGE' table take place. Use a value of `FIRST' or `LAST' to cause
inserts to be made in the first or last underlying table, respectively.
If you specify no `INSERT_METHOD' option or if you specify it with a
value of `NO', inserts into the `MERGE' table are not permitted and
attempts to do so result in an error.

The following example shows how to create a `MERGE' table:

     mysql> CREATE TABLE t1 (
         ->    a INT NOT NULL AUTO_INCREMENT PRIMARY KEY,
         ->    message CHAR(20)) ENGINE=MyISAM;
     mysql> CREATE TABLE t2 (
         ->    a INT NOT NULL AUTO_INCREMENT PRIMARY KEY,
         ->    message CHAR(20)) ENGINE=MyISAM;
     mysql> INSERT INTO t1 (message) VALUES ('Testing'),('table'),('t1');
     mysql> INSERT INTO t2 (message) VALUES ('Testing'),('table'),('t2');
     mysql> CREATE TABLE total (
         ->    a INT NOT NULL AUTO_INCREMENT,
         ->    message CHAR(20), INDEX(a))
         ->    ENGINE=MERGE UNION=(t1,t2) INSERT_METHOD=LAST;

Note that column `a' is indexed as a `PRIMARY KEY' in the underlying
`MyISAM' tables, but not in the `MERGE' table. There it is indexed but
not as a `PRIMARY KEY' because a `MERGE' table cannot enforce
uniqueness over the set of underlying tables.  (Similarly, a column
with a `UNIQUE' index in the underlying tables should be indexed in the
`MERGE' table but not as a `UNIQUE' index.)

After creating the `MERGE' table, you can use it to issue queries that
operate on the group of tables as a whole:

     mysql> SELECT * FROM total;
     +---+---------+
     | a | message |
     +---+---------+
     | 1 | Testing |
     | 2 | table   |
     | 3 | t1      |
     | 1 | Testing |
     | 2 | table   |
     | 3 | t2      |
     +---+---------+

To remap a `MERGE' table to a different collection of `MyISAM' tables,
you can use one of the following methods:

   * `DROP' the `MERGE' table and re-create it.

   * Use `ALTER TABLE TBL_NAME UNION=(...)' to change the list of
     underlying tables.

     It is also possible to use `ALTER TABLE ...  UNION=()' (that is,
     with an empty *Note `UNION': union. clause) to remove all of the
     underlying tables.

The underlying table definitions and indexes must conform closely to
the definition of the `MERGE' table. Conformance is checked when a
table that is part of a `MERGE' table is opened, not when the `MERGE'
table is created. If any table fails the conformance checks, the
operation that triggered the opening of the table fails. This means that
changes to the definitions of tables within a `MERGE' may cause a
failure when the `MERGE' table is accessed. The conformance checks
applied to each table are:

   * The underlying table and the `MERGE' table must have the same
     number of columns.

   * The column order in the underlying table and the `MERGE' table
     must match.

   * Additionally, the specification for each corresponding column in
     the parent `MERGE' table and the underlying tables are compared
     and must satisfy these checks:

        * The column type in the underlying table and the `MERGE' table
          must be equal.

        * The column length in the underlying table and the `MERGE'
          table must be equal.

        * The column of the underlying table and the `MERGE' table can
          be `NULL'.

   * The underlying table must have at least as many indexes as the
     `MERGE' table. The underlying table may have more indexes than the
     `MERGE' table, but cannot have fewer.

     *Note*:

     A known issue exists where indexes on the same columns must be in
     identical order, in both the `MERGE' table and the underlying
     `MyISAM' table. See Bug #33653.

     Each index must satisfy these checks:

        * The index type of the underlying table and the `MERGE' table
          must be the same.

        * The number of index parts (that is, multiple columns within a
          compound index) in the index definition for the underlying
          table and the `MERGE' table must be the same.

        * For each index part:

             * Index part lengths must be equal.

             * Index part types must be equal.

             * Index part languages must be equal.

             * Check whether index parts can be `NULL'.

If a `MERGE' table cannot be opened or used because of a problem with
an underlying table, *Note `CHECK TABLE': check-table. displays
information about which table caused the problem.

* Additional Resources *

   * A forum dedicated to the `MERGE' storage engine is available at
     `http://forums.mysql.com/list.php?93'.


File: manual.info,  Node: merge-table-advantages,  Next: merge-table-problems,  Prev: merge-storage-engine,  Up: merge-storage-engine

14.10.1 `MERGE' Table Advantages and Disadvantages
--------------------------------------------------

`MERGE' tables can help you solve the following problems:

   * Easily manage a set of log tables. For example, you can put data
     from different months into separate tables, compress some of them
     with *Note `myisampack': myisampack, and then create a `MERGE'
     table to use them as one.

   * Obtain more speed. You can split a large read-only table based on
     some criteria, and then put individual tables on different disks.
     A `MERGE' table structured this way could be much faster than
     using a single large table.

   * Perform more efficient searches. If you know exactly what you are
     looking for, you can search in just one of the underlying tables
     for some queries and use a `MERGE' table for others. You can even
     have many different `MERGE' tables that use overlapping sets of
     tables.

   * Perform more efficient repairs. It is easier to repair individual
     smaller tables that are mapped to a `MERGE' table than to repair a
     single large table.

   * Instantly map many tables as one. A `MERGE' table need not
     maintain an index of its own because it uses the indexes of the
     individual tables. As a result, `MERGE' table collections are
     _very_ fast to create or remap. (You must still specify the index
     definitions when you create a `MERGE' table, even though no
     indexes are created.)

   * If you have a set of tables from which you create a large table on
     demand, you can instead create a `MERGE' table from them on
     demand. This is much faster and saves a lot of disk space.

   * Exceed the file size limit for the operating system. Each `MyISAM'
     table is bound by this limit, but a collection of `MyISAM' tables
     is not.

   * You can create an alias or synonym for a `MyISAM' table by
     defining a `MERGE' table that maps to that single table.  There
     should be no really notable performance impact from doing this
     (only a couple of indirect calls and `memcpy()' calls for each
     read).

The disadvantages of `MERGE' tables are:

   * You can use only identical `MyISAM' tables for a `MERGE' table.

   * Some `MyISAM' features are unavailable in `MERGE' tables. For
     example, you cannot create `FULLTEXT' indexes on `MERGE' tables.
     (You can create `FULLTEXT' indexes on the underlying `MyISAM'
     tables, but you cannot search the `MERGE' table with a full-text
     search.)

   * If the `MERGE' table is nontemporary, all underlying `MyISAM'
     tables must be nontemporary. If the `MERGE' table is temporary,
     the `MyISAM' tables can be any mix of temporary and nontemporary.

   * `MERGE' tables use more file descriptors than `MyISAM' tables. If
     10 clients are using a `MERGE' table that maps to 10 tables, the
     server uses (10 x 10) + 10 file descriptors. (10 data file
     descriptors for each of the 10 clients, and 10 index file
     descriptors shared among the clients.)

   * Index reads are slower. When you read an index, the `MERGE'
     storage engine needs to issue a read on all underlying tables to
     check which one most closely matches a given index value. To read
     the next index value, the `MERGE' storage engine needs to search
     the read buffers to find the next value. Only when one index
     buffer is used up does the storage engine need to read the next
     index block. This makes `MERGE' indexes much slower on `eq_ref'
     searches, but not much slower on `ref' searches. For more
     information about `eq_ref' and `ref', see *Note explain::.


File: manual.info,  Node: merge-table-problems,  Prev: merge-table-advantages,  Up: merge-storage-engine

14.10.2 `MERGE' Table Problems
------------------------------

The following are known problems with `MERGE' tables:

   * In versions of MySQL Server prior to 5.1.23, it was possible to
     create temporary merge tables with nontemporary child MyISAM
     tables.

     From versions 5.1.23, MERGE children were locked through the
     parent table. If the parent was temporary, it was not locked and
     so the children were not locked either. Parallel use of the MyISAM
     tables corrupted them.

   * If you use *Note `ALTER TABLE': alter-table. to change a `MERGE'
     table to another storage engine, the mapping to the underlying
     tables is lost. Instead, the rows from the underlying `MyISAM'
     tables are copied into the altered table, which then uses the
     specified storage engine.

   * The `INSERT_METHOD' table option for a `MERGE' table indicates
     which underlying `MyISAM' table to use for inserts into the
     `MERGE' table. However, use of the `AUTO_INCREMENT' table option
     for that `MyISAM' table has no effect for inserts into the `MERGE'
     table until at least one row has been inserted directly into the
     `MyISAM' table.

   * A `MERGE' table cannot maintain uniqueness constraints over the
     entire table. When you perform an *Note `INSERT': insert, the data
     goes into the first or last `MyISAM' table (as determined by the
     `INSERT_METHOD' option). MySQL ensures that unique key values
     remain unique within that `MyISAM' table, but not over all the
     underlying tables in the collection.

   * Because the `MERGE' engine cannot enforce uniqueness over the set
     of underlying tables, *Note `REPLACE': replace. does not work as
     expected. The two key facts are:

        * *Note `REPLACE': replace. can detect unique key violations
          only in the underlying table to which it is going to write
          (which is determined by the `INSERT_METHOD' option). This
          differs from violations in the `MERGE' table itself.

        * If *Note `REPLACE': replace. detects a unique key violation,
          it will change only the corresponding row in the underlying
          table it is writing to; that is, the first or last table, as
          determined by the `INSERT_METHOD' option.

     Similar considerations apply for *Note `INSERT ... ON DUPLICATE
     KEY UPDATE': insert-on-duplicate.

   * `MERGE' tables do not support partitioning.  That is, you cannot
     partition a `MERGE' table, nor can any of a `MERGE' table's
     underlying `MyISAM' tables be partitioned.

   * You should not use *Note `ANALYZE TABLE': analyze-table, *Note
     `REPAIR TABLE': repair-table, *Note `OPTIMIZE TABLE':
     optimize-table, *Note `ALTER TABLE': alter-table, *Note `DROP
     TABLE': drop-table, *Note `DELETE': delete. without a `WHERE'
     clause, or *Note `TRUNCATE TABLE': truncate-table. on any of the
     tables that are mapped into an open `MERGE' table. If you do so,
     the `MERGE' table may still refer to the original table and yield
     unexpected results. To work around this problem, ensure that no
     `MERGE' tables remain open by issuing a *Note `FLUSH TABLES':
     flush.  statement prior to performing any of the named operations.

     The unexpected results include the possibility that the operation
     on the `MERGE' table will report table corruption. If this occurs
     after one of the named operations on the underlying `MyISAM'
     tables, the corruption message is spurious. To deal with this,
     issue a *Note `FLUSH TABLES': flush.  statement after modifying
     the `MyISAM' tables.

   * *Note `DROP TABLE': drop-table. on a table that is in use by a
     `MERGE' table does not work on Windows because the `MERGE' storage
     engine's table mapping is hidden from the upper layer of MySQL.
     Windows does not permit open files to be deleted, so you first must
     flush all `MERGE' tables (with *Note `FLUSH TABLES': flush.)  or
     drop the `MERGE' table before dropping the table.

   * The definition of the `MyISAM' tables and the `MERGE' table are
     checked when the tables are accessed (for example, as part of a
     *Note `SELECT': select. or *Note `INSERT': insert. statement). The
     checks ensure that the definitions of the tables and the parent
     `MERGE' table definition match by comparing column order, types,
     sizes and associated indexes. If there is a difference between the
     tables, an error is returned and the statement fails. Because
     these checks take place when the tables are opened, any changes to
     the definition of a single table, including column changes, column
     ordering, and engine alterations will cause the statement to fail.

   * The order of indexes in the `MERGE' table and its underlying
     tables should be the same. If you use *Note `ALTER TABLE':
     alter-table. to add a `UNIQUE' index to a table used in a `MERGE'
     table, and then use *Note `ALTER TABLE': alter-table. to add a
     nonunique index on the `MERGE' table, the index ordering is
     different for the tables if there was already a nonunique index in
     the underlying table. (This happens because *Note `ALTER TABLE':
     alter-table. puts `UNIQUE' indexes before nonunique indexes to
     facilitate rapid detection of duplicate keys.) Consequently,
     queries on tables with such indexes may return unexpected results.

   * If you encounter an error message similar to `ERROR 1017 (HY000):
     Can't find file: 'TBL_NAME.MRG' (errno: 2)', it generally
     indicates that some of the underlying tables do not use the
     `MyISAM' storage engine. Confirm that all of these tables are
     `MyISAM'.

   * The maximum number of rows in a `MERGE' table is 2^64 (~1.844E+19;
     the same as for a `MyISAM' table). It is not possible to merge
     multiple `MyISAM' tables into a single `MERGE' table that would
     have more than this number of rows.

   * The `MERGE' storage engine does not support *Note `INSERT
     DELAYED': insert-delayed. statements.

   * Use of underlying `MyISAM' tables of differing row formats with a
     parent `MERGE' table is currently known to fail. See Bug #32364.

   * You cannot change the union list of a nontemporary `MERGE' table
     when *Note `LOCK TABLES': lock-tables. is in effect. The following
     does _not_ work:

          CREATE TABLE m1 ... ENGINE=MRG_MYISAM ...;
          LOCK TABLES t1 WRITE, t2 WRITE, m1 WRITE;
          ALTER TABLE m1 ... UNION=(t1,t2) ...;

     However, you can do this with a temporary `MERGE' table.

   * You cannot create a `MERGE' table with `CREATE ... SELECT',
     neither as a temporary `MERGE' table, nor as a nontemporary
     `MERGE' table. For example:

          CREATE TABLE m1 ... ENGINE=MRG_MYISAM ... SELECT ...;

     Attempts to do this result in an error: TBL_NAME is not `BASE
     TABLE'.

   * In some cases, differing `PACK_KEYS' table option values among the
     `MERGE' and underlying tables cause unexpected results if the
     underlying tables contain `CHAR' or `BINARY' columns. As a
     workaround, use `ALTER TABLE' to ensure that all involved tables
     have the same `PACK_KEYS' value. (Bug #50646)


File: manual.info,  Node: federated-storage-engine,  Next: example-storage-engine,  Prev: merge-storage-engine,  Up: storage-engines

14.11 The `FEDERATED' Storage Engine
====================================

* Menu:

* federated-description::        `FEDERATED' Storage Engine Overview
* federated-create::             How to Create `FEDERATED' Tables
* federated-usagenotes::         `FEDERATED' Storage Engine Notes and Tips
* federated-storage-engine-resources::  `FEDERATED' Storage Engine Resources

The `FEDERATED' storage engine lets you access data from a remote MySQL
database without using replication or cluster technology. Querying a
local `FEDERATED' table automatically pulls the data from the remote
(federated) tables. No data is stored on the local tables.

To include the `FEDERATED' storage engine if you build MySQL from
source, invoke `CMake' with the `-DWITH_FEDERATED_STORAGE_ENGINE'
option.

The `FEDERATED' storage engine is not enabled by default in the running
server; to enable `FEDERATED', you must start the MySQL server binary
using the `--federated' option.

To examine the source for the `FEDERATED' engine, look in the
`storage/federated' directory of a MySQL source distribution.


File: manual.info,  Node: federated-description,  Next: federated-create,  Prev: federated-storage-engine,  Up: federated-storage-engine

14.11.1 `FEDERATED' Storage Engine Overview
-------------------------------------------

When you create a table using one of the standard storage engines (such
as `MyISAM', `CSV' or `InnoDB'), the table consists of the table
definition and the associated data. When you create a `FEDERATED'
table, the table definition is the same, but the physical storage of
the data is handled on a remote server.

A `FEDERATED' table consists of two elements:

   * A _remote server_ with a database table, which in turn consists of
     the table definition (stored in the `.frm' file) and the
     associated table. The table type of the remote table may be any
     type supported by the remote `mysqld' server, including `MyISAM'
     or `InnoDB'.

   * A _local server_ with a database table, where the table definition
     matches that of the corresponding table on the remote server. The
     table definition is stored within the `.frm' file. However, there
     is no data file on the local server. Instead, the table definition
     includes a connection string that points to the remote table.

When executing queries and statements on a `FEDERATED' table on the
local server, the operations that would normally insert, update or
delete information from a local data file are instead sent to the remote
server for execution, where they update the data file on the remote
server or return matching rows from the remote server.

The basic structure of a `FEDERATED' table setup is shown in *Note
figure-se-federated-structure::.

FIGURE GOES HERE: `FEDERATED' Table Structure

When a client issues an SQL statement that refers to a `FEDERATED'
table, the flow of information between the local server (where the SQL
statement is executed) and the remote server (where the data is
physically stored) is as follows:

  1. The storage engine looks through each column that the `FEDERATED'
     table has and constructs an appropriate SQL statement that refers
     to the remote table.

  2. The statement is sent to the remote server using the MySQL client
     API.

  3. The remote server processes the statement and the local server
     retrieves any result that the statement produces (an affected-rows
     count or a result set).

  4. If the statement produces a result set, each column is converted
     to internal storage engine format that the `FEDERATED' engine
     expects and can use to display the result to the client that
     issued the original statement.

The local server communicates with the remote server using MySQL client
C API functions. It invokes *Note `mysql_real_query()':
mysql-real-query. to send the statement. To read a result set, it uses
*Note `mysql_store_result()': mysql-store-result. and fetches rows one
at a time using *Note `mysql_fetch_row()': mysql-fetch-row.


File: manual.info,  Node: federated-create,  Next: federated-usagenotes,  Prev: federated-description,  Up: federated-storage-engine

14.11.2 How to Create `FEDERATED' Tables
----------------------------------------

* Menu:

* federated-create-connection::  Creating a `FEDERATED' Table Using `CONNECTION'
* federated-create-server::      Creating a `FEDERATED' Table Using `CREATE SERVER'

To create a `FEDERATED' table you should follow these steps:

  1. Create the table on the remote server. Alternatively, make a note
     of the table definition of an existing table, perhaps using the
     *Note `SHOW CREATE TABLE': show-create-table.  statement.

  2. Create the table on the local server with an identical table
     definition, but adding the connection information that links the
     local table to the remote table.

For example, you could create the following table on the remote server:

     CREATE TABLE test_table (
         id     INT(20) NOT NULL AUTO_INCREMENT,
         name   VARCHAR(32) NOT NULL DEFAULT '',
         other  INT(20) NOT NULL DEFAULT '0',
         PRIMARY KEY  (id),
         INDEX name (name),
         INDEX other_key (other)
     )
     ENGINE=MyISAM
     DEFAULT CHARSET=latin1;

To create the local table that will be federated to the remote table,
there are two options available. You can either create the local table
and specify the connection string (containing the server name, login,
password) to be used to connect to the remote table using the
`CONNECTION', or you can use an existing connection that you have
previously created using the *Note `CREATE SERVER': create-server.
statement.

*Important*:

When you create the local table it _must_ have an identical field
definition to the remote table.

*Note*:

You can improve the performance of a `FEDERATED' table by adding
indexes to the table on the host. The optimization will occur because
the query sent to the remote server will include the contents of the
`WHERE' clause and will be sent to the remote server and subsequently
executed locally. This reduces the network traffic that would otherwise
request the entire table from the server for local processing.


File: manual.info,  Node: federated-create-connection,  Next: federated-create-server,  Prev: federated-create,  Up: federated-create

14.11.2.1 Creating a `FEDERATED' Table Using `CONNECTION'
.........................................................

To use the first method, you must specify the `CONNECTION' string after
the engine type in a *Note `CREATE TABLE': create-table. statement. For
example:

     CREATE TABLE federated_table (
         id     INT(20) NOT NULL AUTO_INCREMENT,
         name   VARCHAR(32) NOT NULL DEFAULT '',
         other  INT(20) NOT NULL DEFAULT '0',
         PRIMARY KEY  (id),
         INDEX name (name),
         INDEX other_key (other)
     )
     ENGINE=FEDERATED
     DEFAULT CHARSET=latin1
     CONNECTION='mysql://fed_user@remote_host:9306/federated/test_table';

*Note*:

`CONNECTION' replaces the `COMMENT' used in some previous versions of
MySQL.

The `CONNECTION' string contains the information required to connect to
the remote server containing the table that will be used to physically
store the data. The connection string specifies the server name, login
credentials, port number and database/table information. In the
example, the remote table is on the server `remote_host', using port
9306. The name and port number should match the host name (or IP
address) and port number of the remote MySQL server instance you want
to use as your remote table.

The format of the connection string is as follows:

     SCHEME://USER_NAME[:PASSWORD]@HOST_NAME[:PORT_NUM]/DB_NAME/TBL_NAME

Where:

   * SCHEME: A recognized connection protocol. Only `mysql' is
     supported as the SCHEME value at this point.

   * USER_NAME: The user name for the connection. This user must have
     been created on the remote server, and must have suitable
     privileges to perform the required actions (*Note `SELECT': select,
     *Note `INSERT': insert, *Note `UPDATE': update, and so forth) on
     the remote table.

   * PASSWORD: (Optional) The corresponding password for USER_NAME.

   * HOST_NAME: The host name or IP address of the remote server.

   * PORT_NUM: (Optional) The port number for the remote server. The
     default is 3306.

   * DB_NAME: The name of the database holding the remote table.

   * TBL_NAME: The name of the remote table. The name of the local and
     the remote table do not have to match.

Sample connection strings:

     CONNECTION='mysql://username:password@hostname:port/database/tablename'
     CONNECTION='mysql://username@hostname/database/tablename'
     CONNECTION='mysql://username:password@hostname/database/tablename'


File: manual.info,  Node: federated-create-server,  Prev: federated-create-connection,  Up: federated-create

14.11.2.2 Creating a `FEDERATED' Table Using `CREATE SERVER'
............................................................

If you are creating a number of `FEDERATED' tables on the same server,
or if you want to simplify the process of creating `FEDERATED' tables,
you can use the *Note `CREATE SERVER': create-server. statement to
define the server connection parameters, just as you would with the
`CONNECTION' string.

The format of the *Note `CREATE SERVER': create-server.  statement is:

     CREATE SERVERSERVER_NAME
     FOREIGN DATA WRAPPER WRAPPER_NAME
     OPTIONS (OPTION [, OPTION] ...)

The SERVER_NAME is used in the connection string when creating a new
`FEDERATED' table.

For example, to create a server connection identical to the
`CONNECTION' string:

     CONNECTION='mysql://fed_user@remote_host:9306/federated/test_table';

You would use the following statement:

     CREATE SERVER fedlink
     FOREIGN DATA WRAPPER mysql
     OPTIONS (USER 'fed_user', HOST 'remote_host', PORT 9306, DATABASE 'federated');

To create a `FEDERATED' table that uses this connection, you still use
the `CONNECTION' keyword, but specify the name you used in the *Note
`CREATE SERVER': create-server. statement.

     CREATE TABLE test_table (
         id     INT(20) NOT NULL AUTO_INCREMENT,
         name   VARCHAR(32) NOT NULL DEFAULT '',
         other  INT(20) NOT NULL DEFAULT '0',
         PRIMARY KEY  (id),
         INDEX name (name),
         INDEX other_key (other)
     )
     ENGINE=FEDERATED
     DEFAULT CHARSET=latin1
     CONNECTION='fedlink/test_table';

The connection name in this example contains the name of the connection
(`fedlink') and the name of the table (`test_table') to link to,
separated by a slash. If you specify only the connection name without a
table name, the table name of the local table is used instead.

For more information on *Note `CREATE SERVER': create-server, see *Note
create-server::.

The *Note `CREATE SERVER': create-server. statement accepts the same
arguments as the `CONNECTION' string. The *Note `CREATE SERVER':
create-server.  statement updates the rows in the `mysql.servers'
table. See the following table for information on the correspondence
between parameters in a connection string, options in the *Note `CREATE
SERVER': create-server. statement, and the columns in the
`mysql.servers' table. For reference, the format of the `CONNECTION'
string is as follows:

     SCHEME://USER_NAME[:PASSWORD]@HOST_NAME[:PORT_NUM]/DB_NAME/TBL_NAME

This table describes the correspondence between parameters in a
connection string, options in the *Note `CREATE SERVER': create-server.
statement, and the columns in the `mysql.servers' table.

Description        `CONNECTION'       *Note `CREATE      `mysql.servers'
                   string             SERVER':           column
                                      create-server.     
                                      option             
Connection scheme  SCHEME             `wrapper_name'     `Wrapper'
Remote user        USER_NAME          `USER'             `Username'
Remote password    PASSWORD           `PASSWORD'         `Password'
Remote host        HOST_NAME          `HOST'             `Host'
Remote port        PORT_NUM           `PORT'             `Port'
Remote database    DB_NAME            `DATABASE'         `Db'


File: manual.info,  Node: federated-usagenotes,  Next: federated-storage-engine-resources,  Prev: federated-create,  Up: federated-storage-engine

14.11.3 `FEDERATED' Storage Engine Notes and Tips
-------------------------------------------------

You should be aware of the following points when using the `FEDERATED'
storage engine:

   * `FEDERATED' tables may be replicated to other slaves, but you must
     ensure that the slave servers are able to use the user/password
     combination that is defined in the `CONNECTION' string (or the row
     in the `mysql.servers' table) to connect to the remote server.

The following items indicate features that the `FEDERATED' storage
engine does and does not support:

   * The remote server must be a MySQL server.

   * The remote table that a `FEDERATED' table points to _must_ exist
     before you try to access the table through the `FEDERATED' table.

   * It is possible for one `FEDERATED' table to point to another, but
     you must be careful not to create a loop.

   * A `FEDERATED' table does not support indexes per se. Because
     access to the table is handled remotely, it is the remote table
     that supports the indexes. Care should be taken when creating a
     `FEDERATED' table since the index definition from an equivalent
     `MyISAM' or other table may not be supported.  For example,
     creating a `FEDERATED' table with an index prefix on *Note
     `VARCHAR': char, *Note `TEXT': blob. or *Note `BLOB': blob.
     columns will fail. The following definition in `MyISAM' is valid:

          CREATE TABLE `T1`(`A` VARCHAR(100),UNIQUE KEY(`A`(30))) ENGINE=MYISAM;

     The key prefix in this example is incompatible with the
     `FEDERATED' engine, and the equivalent statement will fail:

          CREATE TABLE `T1`(`A` VARCHAR(100),UNIQUE KEY(`A`(30))) ENGINE=FEDERATED
            CONNECTION='MYSQL://127.0.0.1:3306/TEST/T1';

     If possible, you should try to separate the column and index
     definition when creating tables on both the remote server and the
     local server to avoid these index issues.

   * Internally, the implementation uses *Note `SELECT': select, *Note
     `INSERT': insert, *Note `UPDATE': update, and *Note `DELETE':
     delete, but not *Note `HANDLER': handler.

   * The `FEDERATED' storage engine supports *Note `SELECT': select,
     *Note `INSERT': insert, *Note `UPDATE': update, *Note `DELETE':
     delete, *Note `TRUNCATE TABLE': truncate-table, and indexes. It
     does not support *Note `ALTER TABLE': alter-table, or any Data
     Definition Language statements that directly affect the structure
     of the table, other than *Note `DROP TABLE': drop-table. The
     current implementation does not use prepared statements.

   * `FEDERATED' accepts *Note `INSERT ... ON DUPLICATE KEY UPDATE':
     insert-on-duplicate. statements, but if a duplicate-key violation
     occurs, the statement fails with an error.

   * Performance on a `FEDERATED' table when performing bulk inserts
     (for example, on a *Note `INSERT INTO ... SELECT ...':
     insert-select. statement) is slower than with other table types
     because each selected row is treated as an individual *Note
     `INSERT': insert. statement on the `FEDERATED' table.

   * Transactions are not supported.

   * `FEDERATED' performs bulk-insert handling such that multiple rows
     are sent to the remote table in a batch. This provides a
     performance improvement and enables the remote table to perform
     improvement. Also, if the remote table is transactional, it
     enables the remote storage engine to perform statement rollback
     properly should an error occur.  This capability has the following
     limitations:

        * The size of the insert cannot exceed the maximum packet size
          between servers. If the insert exceeds this size, it is
          broken into multiple packets and the rollback problem can
          occur.

        * Bulk-insert handling does not occur for *Note `INSERT ... ON
          DUPLICATE KEY UPDATE': insert-on-duplicate.

   * There is no way for the `FEDERATED' engine to know if the remote
     table has changed. The reason for this is that this table must
     work like a data file that would never be written to by anything
     other than the database system. The integrity of the data in the
     local table could be breached if there was any change to the
     remote database.

   * When using a `CONNECTION' string, you cannot use an '@' character
     in the password. You can get round this limitation by using the
     *Note `CREATE SERVER': create-server. statement to create a server
     connection.

   * The `insert_id' and `timestamp' options are not propagated to the
     data provider.

   * Any *Note `DROP TABLE': drop-table. statement issued against a
     `FEDERATED' table drops only the local table, not the remote table.

   * `FEDERATED' tables do not work with the query cache.

   * User-defined partitioning is not supported for `FEDERATED' tables.


File: manual.info,  Node: federated-storage-engine-resources,  Prev: federated-usagenotes,  Up: federated-storage-engine

14.11.4 `FEDERATED' Storage Engine Resources
--------------------------------------------

The following additional resources are available for the `FEDERATED'
storage engine:

   * A forum dedicated to the `FEDERATED' storage engine is available at
     `http://forums.mysql.com/list.php?105'.


File: manual.info,  Node: example-storage-engine,  Next: storage-engines-other,  Prev: federated-storage-engine,  Up: storage-engines

14.12 The `EXAMPLE' Storage Engine
==================================

The `EXAMPLE' storage engine is a stub engine that does nothing. Its
purpose is to serve as an example in the MySQL source code that
illustrates how to begin writing new storage engines. As such, it is
primarily of interest to developers.

To enable the `EXAMPLE' storage engine if you build MySQL from source,
invoke `CMake' with the `-DWITH_EXAMPLE_STORAGE_ENGINE' option.

To examine the source for the `EXAMPLE' engine, look in the
`storage/example' directory of a MySQL source distribution.

When you create an `EXAMPLE' table, the server creates a table format
file in the database directory. The file begins with the table name and
has an `.frm' extension. No other files are created. No data can be
stored into the table. Retrievals return an empty result.

     mysql> CREATE TABLE test (i INT) ENGINE = EXAMPLE;
     Query OK, 0 rows affected (0.78 sec)

     mysql> INSERT INTO test VALUES(1),(2),(3);
     ERROR 1031 (HY000): Table storage engine for 'test' doesn't »
                         have this option

     mysql> SELECT * FROM test;
     Empty set (0.31 sec)

The `EXAMPLE' storage engine does not support indexing.


File: manual.info,  Node: storage-engines-other,  Prev: example-storage-engine,  Up: storage-engines

14.13 Other Storage Engines
===========================

Other storage engines may be available from third parties and community
members that have used the Custom Storage Engine interface.

Third party engines are not supported by MySQL. For further
information, documentation, installation guides, bug reporting or for
any help or assistance with these engines, please contact the developer
of the engine directly.

For more information on developing a customer storage engine that can
be used with the Pluggable Storage Engine Architecture, see MySQL
Internals: Writing a Custom Storage Engine
(http://dev.mysql.com/doc/internals/en/custom-engine.html).


File: manual.info,  Node: ha-overview,  Next: replication,  Prev: storage-engines,  Up: Top

15 High Availability and Scalability
************************************

* Menu:

* ha-ovm-template::              Oracle VM Template for MySQL Enterprise Edition
* ha-drbd::                      Overview of MySQL with DRBD/Pacemaker/Corosync/Oracle Linux
* ha-wfc::                       Overview of MySQL with Windows Failover Clustering
* ha-vm::                        Using MySQL within an Amazon EC2 Instance
* ha-zfs-replication::           Using ZFS Replication
* ha-memcached::                 Using MySQL with `memcached'
* mysql-proxy::                  MySQL Proxy

Data is the currency of today's web, mobile, social, enterprise and
cloud applications. Ensuring data is always available is a top priority
for any organization. Minutes of downtime can result in significant
loss of revenue and reputation.

There is no `one size fits all' approach to delivering High
Availability (HA). Unique application attributes, business
requirements, operational capabilities and legacy infrastructure can
all influence HA technology selection. And technology is only one
element in delivering HA: people and processes are just as critical as
the technology itself.

MySQL is deployed into many applications demanding availability and
scalability. *Availability* refers to the ability to cope with, and if
necessary recover from, failures on the host, including failures of
MySQL, the operating system, or the hardware and maintenance activity
that may otherwise cause downtime.  Scalability refers to the ability
to spread both the database and the load of your application queries
across multiple MySQL servers.

Because each application has different operational and availability
requirements, MySQL offers a range of certified and supported
solutions, delivering the appropriate levels of High Availability (HA)
and scalability to meet service level requirements. Such solutions
extend from replication, through virtualization and geographically
redundant, multi-data center solutions delivering 99.999% uptime.

Selecting the right high availability solution for an application
largely depends on:

   * The level of availability required.

   * The type of application being deployed.

   * Accepted best practices within your own environment.

The primary solutions supported by MySQL include:

   * MySQL Replication. Learn more: *Note replication::

   * MySQL Cluster. Learn more: *Note mysql-cluster::

   * Oracle VM Template for MySQL. Learn more: *Note ha-ovm-template::.

   * MySQL with DRBD with Corosync and Pacemaker. Learn more: *Note
     ha-drbd::.

   * MySQL with Windows Failover Clustering. Learn more: *Note ha-wfc::.

   * MySQL with Solaris Cluster.  Learn more about Solaris Cluster.
     (http://www.oracle.com/technetwork/server-storage/solaris-cluster/overview/index.html)

Further options are available using third-party solutions.

Each architecture used to achieve highly available database services is
differentiated by the levels of uptime it offers. These architectures
can be grouped into three main categories:

   * Data Replication.

   * Clustered & Virtualized Systems.

   * Shared-Nothing, Geographically-Replicated Clusters.

As illustrated in the following figure, each of these architectures
offers progressively higher levels of uptime, which must be balanced
against potentially greater levels of cost and complexity that each can
incur. Simply deploying a high availability architecture is not a
guarantee of actually delivering HA. In fact, a poorly implemented and
maintained shared-nothing cluster could easily deliver lower levels of
availability than a simple data replication solution.

FIGURE GOES HERE: Tradeoffs: Cost and Complexity versus Availability

The following table compares the HA and Scalability capabilities of the
various MySQL solutions:

*Feature Comparison of MySQL HA Solutions*

Requirement    MySQL          DRBD           Oracle VM      MySQL Cluster
               Replication                   Template       
*Availability*                                              
Platform       All Supported  Linux          Oracle Linux   All Supported
Support        by MySQL                                     by MySQL
               Server                                       Cluster
               (http://www.mysql.com/support/supportedplatforms/database.html)                              (http://www.mysql.com/support/supportedplatforms/cluster.html)
Automated IP   No             Yes            Yes            Depends on
Failover                                                    Connector and
                                                            Configuration
Automated      No             Yes            Yes            Yes
Database                                                    
Failover                                                    
Automatic      No             Yes            N/A - Shared   Yes
Data                                         Storage        
Resynchronization                                             
Typical        User / Script  Configuration  Configuration  1 Second and
Failover Time  Dependent      Dependent, 60  Dependent, 60  Less
                              seconds and    seconds and    
                              Above          Above          
Synchronous    No,            Yes            N/A - Shared   Yes
Replication    Asynchronous                  Storage        
               and                                          
               Semisynchronous                              
Shared Storage No,            No,            Yes            No,
               Distributed    Distributed                   Distributed
Geographic     Yes            Yes, via       Yes, via       Yes, via
redundancy                    MySQL          MySQL          MySQL
support                       Replication    Replication    Replication
Update Schema  No             No             No             Yes
On-Line                                                     
*Scalability*                                               
Number of      One Master,    One Active     One Active     255
Nodes          Multiple       (primary),     (primary),     
               Slaves         one Passive    one Passive    
                              (secondary)    (secondary)    
                              Node           Node           
Built-in Load  Reads, via     Reads, via     Reads, via     Yes, Reads
Balancing      MySQL          MySQL          MySQL          and Writes
               Replication    Replication    Replication &  
                                             During         
                                             Failover       
Supports       Yes            Yes            Yes            Yes
Read-Intensive                                              
Workloads                                                   
Supports       Yes, via       Yes, via       Yes, via       Yes, via
Write-IntensiveApplication-LevelApplication-LevelApplication-LevelAuto-Sharding
Workloads      Sharding       Sharding to    Sharding to    
                              Multiple       Multiple       
                              Active/Passive Active/Passive 
                              Pairs          Pairs          
Scale On-Line  No             No             No             Yes
(add nodes,                                                 
repartition,                                                
etc.)                                                       


File: manual.info,  Node: ha-ovm-template,  Next: ha-drbd,  Prev: ha-overview,  Up: ha-overview

15.1 Oracle VM Template for MySQL Enterprise Edition
====================================================

Virtualization is a key technology to enable data center efficiency and
high availability while providing the foundation for cloud computing.
Integrating MySQL Enterprise Edition with Oracle Linux, the Oracle VM
Template is the fastest, easiest, and most reliable way to provision
virtualized MySQL instances, enabling users to meet the explosive
demand for highly available services.

The Oracle VM Template enables rapid deployment and eliminates manual
configuration efforts. It provides a preinstalled and pre-configured
virtualized MySQL 5.5 Enterprise Edition software image running on
Oracle Linux and Oracle VM, certified for production use. The MySQL
software image has undergone extensive integration and quality
assurance testing as part of the development process.

In addition to rapid provisioning, MySQL users also benefit from the
integrated high availability features of Oracle VM which are designed
to enable organizations to meet stringent SLA (Service Level Agreement)
demands through a combination of:

   * *Automatic recovery from failures*, with Oracle VM automatically
     restarting failed instances on available servers in the server
     pool after outages of the physical server, VM or MySQL database.

   * *Live Migration*, enabling operations staff to move running
     instances of MySQL to alternative hosts within a server pool
     during maintenance operations.

Instructions for the creation, deployment and use of the Oracle VM
Template for MySQL Enterprise Edition are available from:

   * The Oracle VM Template for MySQL Enterprise Edition whitepaper:
     `http://www.mysql.com/why-mysql/white-papers/mysql_wp_oracle-vm-template-for-mee.php'.

   * The README file accompanying the download of the Template.

To download the Oracle VM Template for MySQL Enterprise, go to
`http://edelivery.oracle.com/oraclevm' and follow these instructions:

   * Complete your registration information (Name, Company Name, Email
     Address and Country) and click on the download agreement.

   * Select "Oracle VM Templates" from the "Select a Product Pack"
     pull-down menu and click "Go".

   * Select MySQL Enterprise from the list of Oracle VM Templates.

   * Download and unzip the files and refer to the README for further
     instructions.


File: manual.info,  Node: ha-drbd,  Next: ha-wfc,  Prev: ha-ovm-template,  Up: ha-overview

15.2 Overview of MySQL with DRBD/Pacemaker/Corosync/Oracle Linux
================================================================

DRBD (Distributed Replication Block Device) is one of the leading
solutions for MySQL HA (High Availability). When combined with
Pacemaker and Corosync, users have:

   * An end-to-end, integrated stack of mature and proven open source
     technologies, fully supported by Oracle (as part of MySQL
     Enterprise Edition).

   * Automatic failover and recovery for service continuity.

   * Mirroring, via synchronous replication, to ensure failover between
     nodes without the risk of losing committed transactions.

   * Building of HA clusters from commodity hardware, without the
     requirement for shared-storage.

The following figure illustrates the stack that can be used to deliver
a level of High Availability for the MySQL service.

At the lowest level, 2 hosts are required in order to provide physical
redundancy; if using a virtual environment, those 2 hosts should be on
different physical machines. It is an important feature that no shared
storage is required. At any point in time, the services will be active
on one host and in standby mode on the other.

Pacemaker and Corosync combine to provide the clustering layer that
sits between the services and the underlying hosts and operating
systems. Pacemaker is responsible for starting and stopping services,
ensuring that they are running on exactly one host, thus delivering
high availability and avoiding data corruption. Corosync provides the
underlying messaging infrastructure between the nodes that enables
Pacemaker to do its job; it also handles the nodes membership within
the cluster and informs Pacemaker of any changes.

FIGURE GOES HERE: MySQL, DRBD, Pacemaker, and Corosync Stack

The core Pacemaker process does not have built-in knowledge of the
specific services to be managed; instead, it uses agents that provide a
wrapper for the service-specific actions. For example, in this solution
we use agents for Virtual IP Addresses, MySQL and DRBD: these are all
existing agents and come packaged with Pacemaker.

The essential services managed by Pacemaker in this configuration are
DRBD, MySQL and the Virtual IP Address that applications use to connect
to the active MySQL service.

DRBD synchronizes data at the block device (typically a spinning or
solid state disk) - transparent to the application, database and even
the file system. DRBD requires the use of a journaling file system such
as `ext3' or `ext4'.  For this solution, it acts in an active-standby
mode: at any point in time, the directories being managed by DRBD are
accessible for reads and writes on exactly one of the two hosts and
inaccessible (even for reads) on the other. Any changes made on the
active host are synchronously replicated to the standby host by DRBD.

Download the following guide for detailed instructions on installing,
configuring, provisioning and testing the complete MySQL and DRBD
stack, including:

   * MySQL Database.

   * DRBD kernel module and userland utilities.

   * Pacemaker and Corosync cluster messaging and management processes.

   * Oracle Linux operating system.

Download the guide at:
`http://www.mysql.com/why-mysql/white-papers/mysql-high-availability-drbd-configuration-deployment-guide/'.

* Support for DRBD *

The complete DRBD stack for MySQL has been certified by Oracle, and
commercial support is available as part of MySQL Enterprise Edition
(http://www.mysql.com/products/enterprise/) and Oracle Linux Premier
Support
(http://www.oracle.com/us/technologies/linux/support/overview/index.html),
providing a single point of contact for the entire stack, whether
issues relate to the operating system, DRBD, clustering software or
MySQL.


File: manual.info,  Node: ha-wfc,  Next: ha-vm,  Prev: ha-drbd,  Up: ha-overview

15.3 Overview of MySQL with Windows Failover Clustering
=======================================================

Microsoft Windows is consistently ranked as the top development
platform for MySQL, based on surveys of the MySQL user community.

MySQL Enterprise Edition is certified and supported with Windows Server
2008 R2 Failover Clustering (WSFC), enabling organizations to safely
deploy business-critical applications demanding high levels of
availability using Microsoft's native Windows clustering services.

The following figure illustrates the integration of MySQL with Windows
Server Failover Clustering to provide a highly available service:

FIGURE GOES HERE: Typical MySQL HA Configuration with Windows Server
Failover Clustering

In this architecture, MySQL is deployed in an Active / Passive
configuration. Failures of either MySQL or the underlying server are
automatically detected and the MySQL instance is restarted on the
Passive node. Applications accessing the database, as well as any MySQL
replication slaves, can automatically reconnect to the new MySQL
process using the same Virtual IP address once MySQL recovery has
completed and it starts accepting connections.

MySQL with Windows Failover Clustering requires at least 2 servers
within the cluster together with shared storage (for example, FC-AL SAN
or iSCSI disks).

The MySQL binaries and data files are stored in the shared storage and
Windows Failover Clustering ensures that only one of the cluster nodes
will access those files at any point in time.

Clients connect to the MySQL service through a Virtual IP Address
(VIP). In the event of failover they experience a brief loss of
connection, but otherwise do not need to be aware that the failover has
happened, other than to handle the failure of any transactions that
were active when the failover occurred.

You can learn more about configuring MySQL with Windows Server Failover
Clustering from the whitepaper posted here:
`http://www.mysql.com/why-mysql/white-papers/mysql_wp_windows_failover_clustering.php'

For background and usage information about Windows Server Failover
Clustering, see these pages on the Microsoft Technet site:

   * Failover Clustering
     (http://technet.microsoft.com/en-us/library/cc725923(v=ws.10).aspx)

   * Failover Clusters in Windows Server 2008 R2
     (http://technet.microsoft.com/en-us/library/ff182338(v=ws.10).aspx)


File: manual.info,  Node: ha-vm,  Next: ha-zfs-replication,  Prev: ha-wfc,  Up: ha-overview

15.4 Using MySQL within an Amazon EC2 Instance
==============================================

* Menu:

* ha-vm-aws-setup::              Setting Up MySQL on an EC2 AMI
* ha-vm-aws-instance::           EC2 Instance Limitations
* ha-vm-aws-deploy::             Deploying a MySQL Database Using EC2

The Amazon Elastic Compute Cloud (EC2) service provides virtual servers
that you can build and deploy to run a variety of different
applications and services, including MySQL. The EC2 service is based
around the Xen framework, supporting x86, Linux based, platforms with
individual instances of a virtual machine referred to as an Amazon
Machine Image (AMI). You have complete (root) access to the AMI
instance that you create, enabling you to configure and install your
AMI in any way you choose.

To use EC2, you create an AMI based on the configuration and
applications that you intend to use, and upload the AMI to the Amazon
Simple Storage Service (S3). From the S3 resource, you can deploy one
or more copies of the AMI to run as an instance within the EC2
environment. The EC2 environment provides management and control of the
instance and contextual information about the instance while it is
running.

Because you can create and control the AMI, the configuration, and the
applications, you can deploy and create any environment you choose.
This includes a basic MySQL server in addition to more extensive
replication, HA and scalability scenarios that enable you to take
advantage of the EC2 environment, and the ability to deploy additional
instances as the demand for your MySQL services and applications grow.

To aid the deployment and distribution of work, three different Amazon
EC2 instances are available, small (identified as `m1.small'), large
(`m1.large') and extra large (`m1.xlarge'). The different types provide
different levels of computing power measured in EC2 computer units
(ECU). A summary of the different instance configurations is shown in
the following table.

This table lists EC2 instance attributes and outlines attribute
configuration settings for Small, Large, and Extra Large EC2 instances.

EC2 Attribute      Small              Large              Extra Large
Platform           32-bit             64-bit             64-bit
CPU cores          1                  2                  4
ECUs               1                  4                  8
RAM                1.7GB              7.5GB              15GB
Storage            150GB              840GB              1680GB
I/O Performance    Medium             High               High

The typical model for deploying and using MySQL within the EC2
environment is to create a basic AMI that you can use to hold your
database data and application. Once the basic environment for your
database and application has been created you can then choose to deploy
the AMI to a suitable instance. Here the flexibility of having an AMI
that can be re-deployed from the small to the large or extra large EC2
instance makes it easy to upgrade the hardware environment without
rebuilding your application or database stack.

To get started with MySQL on EC2, including information on how to set
up and install MySQL within an EC2 installation and how to port and
migrate your data to the running instance, see *Note ha-vm-aws-setup::.

For tips and advice on how to create a scalable EC2 environment using
MySQL, including guides on setting up replication, see *Note
ha-vm-aws-deploy::.


File: manual.info,  Node: ha-vm-aws-setup,  Next: ha-vm-aws-instance,  Prev: ha-vm,  Up: ha-vm

15.4.1 Setting Up MySQL on an EC2 AMI
-------------------------------------

There are many different ways of setting up an EC2 AMI with MySQL,
including using any of the pre-configured AMIs supplied by Amazon.

The default _Getting Started_ AMI provided by Amazon uses Fedora Core
4, and you can install MySQL by using `yum':

     shell> yum install mysql

This installs both the MySQL server and the Perl DBD::mysql driver for
the Perl DBI API.

Alternatively, you can use one of the AMIs that include MySQL within
the standard installation.

Finally, you can also install a standard version of MySQL downloaded
from the MySQL Web site. The installation process and instructions are
identical to any other installation of MySQL on Linux. See *Note
installing::.

The standard configuration for MySQL places the data files in the
default location, `/var/lib/mysql'. The default data directory on an
EC2 instance is `/mnt' (although on the large and extra large instance
you can alter this configuration). You must edit `/etc/my.cnf' to set
the `datadir' option to point to the larger storage area.

*Important*:

The first time you use the main storage location within an EC2 instance
it needs to be initialized. The initialization process starts
automatically the first time you write to the device. You can start
using the device right away, but the write performance of the new
device is significantly lower on the initial writes until the
initialization process has finished.

To avoid this problem when setting up a new instance, you should start
the initialization process before populating your MySQL database. One
way to do this is to use `dd' to write to the file system:

     root-shell> dd if=/dev/zero of=initialize bs=1024M count=50

The preceding creates a 50GB on the file system and starts the
initialization process. Delete the file once the process has finished.

The initialization process can be time-consuming. On the small
instance, initialization takes between two and three hours. For the
large and extra large drives, the initialization can be 10 or 20 hours,
respectively.

In addition to configuring the correct storage location for your MySQL
data files, also consider setting the following other settings in your
instance before you save the instance configuration for deployment:

   * Set the MySQL server ID, so that when you use it for replication,
     the ID information is set correctly.

   * Enabling binary logging, so that replication can be initialized
     without starting and stopping the server.

   * Set the caching and memory parameters for your storage engines.
     There are no limitations or restrictions on what storage engines
     you use in your EC2 environment. Choose a configuration, possibly
     using one of the standard configurations provided with MySQL
     appropriate for the instance on which you expect to deploy. The
     large and extra large instances have RAM that can be dedicated to
     caching. Be aware that if you choose to install `memcached' on the
     servers as part of your application stack you must ensure there is
     enough memory for both MySQL and `memcached'.

Once you have configured your AMI with MySQL and the rest of your
application stack, save the AMI so that you can deploy and reuse the
instance.

Once you have your application stack configured in an AMI, populating
your MySQL database with data should be performed by creating a dump of
your database using `mysqldump', transferring the dump to the EC2
instance, and then reloading the information into the EC2 instance
database.

Before using your instance with your application in a production
situation, be aware of the limitations of the EC2 instance environment.
See *Note ha-vm-aws-instance::. To begin using your MySQL AMI, consult
the notes on deployment. See *Note ha-vm-aws-deploy::.


File: manual.info,  Node: ha-vm-aws-instance,  Next: ha-vm-aws-deploy,  Prev: ha-vm-aws-setup,  Up: ha-vm

15.4.2 EC2 Instance Limitations
-------------------------------

Be aware of the following limitations of the EC2 instances before
deploying your applications. Although these shouldn't affect your
ability to deploy within the Amazon EC2 environment, they may alter the
way you setup and configure your environment to support your
application.

   * Data stored within instances is not persistent. If you create an
     instance and populate the instance with data, then the data only
     remains in place while the machine is running, and does not
     survive a reboot. If you shut down the instance, any data it
     contained is lost.

     To ensure that you do not lose information, take regular backups
     using *Note `mysqldump': mysqldump. If the data being stored is
     critical, consider using replication to keep a `live' backup of
     your data in the event of a failure. When creating a backup, write
     the data to the Amazon S3 service to avoid the transfer charges
     applied when copying data offsite.

   * EC2 instances are not persistent. If the hardware on which an
     instance is running fails, the instance is shut down. This can
     lead to loss of data or service.

     However, if you use EBS, you can attach an EBS storage volume to
     an EC2 instance, and that EBS volume is persistent. Like a disk,
     an EBS volume can fail, but it is possible to create point-in-time
     snapshots of the volume. Snapshots are persisted to Amazon S3 and
     can be used to restore data in the event of volume failure.

   * To replicate your EC2 instances to a non-EC2 environment, be aware
     of the transfer costs to and from the EC2 service. Data transfer
     between different EC2 instances is free, so using replication
     within the EC2 environment does not incur additional charges.

   * Certain HA features are either not directly supported, or have
     limiting factors or problems that could reduce their utility.  For
     example, using DRBD or MySQL Cluster might not work. The default
     storage configuration is also not redundant. You can use
     software-based RAID to improve redundancy, but this implies a
     further performance hit.


File: manual.info,  Node: ha-vm-aws-deploy,  Prev: ha-vm-aws-instance,  Up: ha-vm

15.4.3 Deploying a MySQL Database Using EC2
-------------------------------------------

Because you cannot guarantee the uptime and availability of your EC2
instances, when deploying MySQL within the EC2 environment, use an
approach that enables you to easily distribute work among your EC2
instances. There are a number of ways of doing this.  Using sharding
techniques, where you split the application across multiple servers
dedicating specific blocks of your dataset and users to different
servers is an effective way of doing this. As a general rule, it is
easier to create more EC2 instances to support more users than to
upgrade the instance to a larger machine.

The EC2 architecture works best when you treat the EC2 instances as
temporary, cache-based solutions, rather than as a long-term, high
availability solution. In addition to using multiple machines, take
advantage of other services, such as `memcached' to provide additional
caching for your application to help reduce the load on the MySQL
server so that it can concentrate on writes. On the large and extra
large instances within EC2, the RAM available can provide a large memory
cache for data.

Most types of scale-out topology that you would use with your own
hardware can be used and applied within the EC2 environment.  However,
use the limitations and advice already given to ensure that any
potential failures do not lose you any data. Also, because the relative
power of each EC2 instance is so low, be prepared to alter your
application to use sharding and add further EC2 instances to improve
the performance of your application.

For example, take the typical scale-out environment shown following,
where a single master replicates to one or more slaves (three in this
example), with a web server running on each replication slave.

Typical standard scale-out structure

You can reproduce this structure completely within the EC2 environment,
using an EC2 instance for the master, and one instance for each of the
web and MySQL slave servers.

*Note*:

Within the EC2 environment, internal (private) IP addresses used by the
EC2 instances are constant. Always use these internal addresses and
names when communicating between instances. Only use public IP
addresses when communicating with the outside world - for example, when
publicizing your application.

To ensure reliability of your database, add at least one replication
slave dedicated to providing an active backup and storage to the Amazon
S3 facility. You can see an example of this in the following topology.

Typical standard scale-out structure with backup using EC2

*Using `memcached'* within your EC2 instances should provide better
performance. The large and extra large instances have a significant
amount of RAM. To use `memcached' in your application, when loading
information from the database, first check whether the item exists in
the cache. If the data you are looking for exists in the cache, use it.
If not, reload the data from the database and populate the cache.

*Sharding* divides up data in your entire database by allocating
individual machines or machine groups to provide a unique set of data
according to an appropriate group. For example, you might put all users
with a surname ending in the letters A-D onto a single server. When a
user connects to the application and their surname is known, queries
can be redirected to the appropriate MySQL server.

When using sharding with EC2, separate the web server and MySQL server
into separate EC2 instances, and then apply the sharding decision logic
into your application. Once you know which MySQL server you should be
using for accessing the data you then distribute queries to the
appropriate server. You can see a sample of this in the following
illustration.

Using sharding in EC2 to spread the load

*Warning*:

With sharding and EC2, be careful that the potential for failure of an
instance does not affect your application. If the EC2 instance that
provides the MySQL server for a particular shard fails, then all of the
data on that shard becomes unavailable.


File: manual.info,  Node: ha-zfs-replication,  Next: ha-memcached,  Prev: ha-vm,  Up: ha-overview

15.5 Using ZFS Replication
==========================

* Menu:

* ha-zfs-config::                Using ZFS for File System Replication
* ha-zfs-mysql::                 Configuring MySQL for ZFS Replication
* ha-zfs-mysql-recovery::        Handling MySQL Recovery with ZFS

To support high availability environments, providing an instant copy of
the information on both the currently active machine and the hot backup
is a critical part of the HA solution. There are many solutions to this
problem, including *Note replication:: and *Note ha-drbd::.

The ZFS file system provides functionality to create a snapshot of the
file system contents, transfer the snapshot to another machine, and
extract the snapshot to recreate the file system. You can create a
snapshot at any time, and you can create as many snapshots as you like.
By continually creating, transferring, and restoring snapshots, you can
provide synchronization between one or more machines in a fashion
similar to DRBD.

The following example shows a simple Solaris system running with a
single ZFS pool, mounted at `/scratchpool':

     Filesystem             size   used  avail capacity  Mounted on
     /dev/dsk/c0d0s0        4.6G   3.7G   886M    82%    /
     /devices                 0K     0K     0K     0%    /devices
     ctfs                     0K     0K     0K     0%    /system/contract
     proc                     0K     0K     0K     0%    /proc
     mnttab                   0K     0K     0K     0%    /etc/mnttab
     swap                   1.4G   892K   1.4G     1%    /etc/svc/volatile
     objfs                    0K     0K     0K     0%    /system/object
     /usr/lib/libc/libc_hwcap1.so.1
                            4.6G   3.7G   886M    82%    /lib/libc.so.1
     fd                       0K     0K     0K     0%    /dev/fd
     swap                   1.4G    40K   1.4G     1%    /tmp
     swap                   1.4G    28K   1.4G     1%    /var/run
     /dev/dsk/c0d0s7         26G   913M    25G     4%    /export/home
     scratchpool             16G    24K    16G     1%    /scratchpool

The MySQL data is stored in a directory on `/scratchpool'. To help
demonstrate some of the basic replication functionality, there are also
other items stored in `/scratchpool' as well:

     total 17
     drwxr-xr-x  31 root     bin           50 Jul 21 07:32 DTT/
     drwxr-xr-x   4 root     bin            5 Jul 21 07:32 SUNWmlib/
     drwxr-xr-x  14 root     sys           16 Nov  5 09:56 SUNWspro/
     drwxrwxrwx  19 1000     1000          40 Nov  6 19:16 emacs-22.1/

To create a snapshot of the file system, you use `zfs snapshot',
specifying the pool and the snapshot name:

     root-shell> zfs snapshot scratchpool@snap1

To list the snapshots already taken:

     root-shell> zfs list -t snapshot
     NAME                USED  AVAIL  REFER  MOUNTPOINT
     scratchpool@snap1      0      -  24.5K  -
     scratchpool@snap2      0      -  24.5K  -

The snapshots themselves are stored within the file system metadata,
and the space required to keep them varies as time goes on because of
the way the snapshots are created. The initial creation of a snapshot
is very quick, because instead of taking an entire copy of the data and
metadata required to hold the entire snapshot, ZFS records only the
point in time and metadata of when the snapshot was created.

As more changes to the original file system are made, the size of the
snapshot increases because more space is required to keep the record of
the old blocks. If you create lots of snapshots, say one per day, and
then delete the snapshots from earlier in the week, the size of the
newer snapshots might also increase, as the changes that make up the
newer state have to be included in the more recent snapshots, rather
than being spread over the seven snapshots that make up the week.

You cannot directly back up the snapshots because they exist within the
file system metadata rather than as regular files. To get the snapshot
into a format that you can copy to another file system, tape, and so
on, you use the `zfs send' command to create a stream version of the
snapshot.

For example, to write the snapshot out to a file:

     root-shell> zfs send scratchpool@snap1 >/backup/scratchpool-snap1

Or tape:

     root-shell> zfs send scratchpool@snap1 >/dev/rmt/0

You can also write out the incremental changes between two snapshots
using `zfs send':

     root-shell> zfs send scratchpool@snap1 scratchpool@snap2 >/backup/scratchpool-changes

To recover a snapshot, you use `zfs recv', which applies the snapshot
information either to a new file system, or to an existing one.


File: manual.info,  Node: ha-zfs-config,  Next: ha-zfs-mysql,  Prev: ha-zfs-replication,  Up: ha-zfs-replication

15.5.1 Using ZFS for File System Replication
--------------------------------------------

Because `zfs send' and `zfs recv' use streams to exchange data, you can
use them to replicate information from one system to another by
combining `zfs send', `ssh', and `zfs recv'.

For example, to copy a snapshot of the `scratchpool' file system to a
new file system called `slavepool' on a new server, you would use the
following command. This sequence combines the snapshot of
`scratchpool', the transmission to the slave machine (using `ssh' with
login credentials), and the recovery of the snapshot on the slave using
`zfs recv':

     root-shell> zfs send scratchpool@snap1 |ssh ID@HOST pfexec zfs recv -F slavepool

The first part of the pipeline, `zfs send scratchpool@snap1', streams
the snapshot. The `ssh' command, and the command that it executes on
the other server, `pfexec zfs recv -F slavepool', receives the streamed
snapshot data and writes it to slavepool. In this instance, I've
specified the `-F' option which forces the snapshot data to be applied,
and is therefore destructive. This is fine, as I'm creating the first
version of my replicated file system.

On the slave machine, the replicated file system contains the exact
same content:

     root-shell> ls -al /slavepool/
     total 23
     drwxr-xr-x   6 root     root           7 Nov  8 09:13 ./
     drwxr-xr-x  29 root     root          34 Nov  9 07:06 ../
     drwxr-xr-x  31 root     bin           50 Jul 21 07:32 DTT/
     drwxr-xr-x   4 root     bin            5 Jul 21 07:32 SUNWmlib/
     drwxr-xr-x  14 root     sys           16 Nov  5 09:56 SUNWspro/
     drwxrwxrwx  19 1000     1000          40 Nov  6 19:16 emacs-22.1/

Once a snapshot has been created, to synchronize the file system again,
you create a new snapshot and then use the incremental snapshot feature
of `zfs send' to send the changes between the two snapshots to the
slave machine again:

     root-shell> zfs send -i scratchpool@snapshot1 scratchpool@snapshot2 |ssh ID@HOST pfexec zfs recv slavepool

This operation only succeeds if the file system on the slave machine
has not been modified at all. You cannot apply the incremental changes
to a destination file system that has changed.  In the example above,
the `ls' command would cause problems by changing the metadata, such as
the last access time for files or directories.

To prevent changes on the slave file system, set the file system on the
slave to be read-only:

     root-shell> zfs set readonly=on slavepool

Setting `readonly' means that you cannot change the file system on the
slave by normal means, including the file system metadata. Operations
that would normally update metadata (like our `ls') silently perform
their function without attempting to update the file system state.

In essence, the slave file system is nothing but a static copy of the
original file system. However, even when configured to to be read-only,
a file system can have snapshots applied to it. With the file system
set to read only, re-run the initial copy:

     root-shell> zfs send scratchpool@snap1 |ssh ID@HOST pfexec zfs recv -F slavepool

Now you can make changes to the original file system and replicate them
to the slave.


File: manual.info,  Node: ha-zfs-mysql,  Next: ha-zfs-mysql-recovery,  Prev: ha-zfs-config,  Up: ha-zfs-replication

15.5.2 Configuring MySQL for ZFS Replication
--------------------------------------------

Configuring MySQL on the source file system is a case of creating the
data on the file system that you intend to replicate. The configuration
file in the example below has been updated to use
`/scratchpool/mysql-data' as the data directory, and now you can
initialize the tables:

     root-shell> mysql_install_db --defaults-file=/etc/mysql/5.5/my.cnf --user=mysql

To synchronize the initial information, perform a new snapshot and then
send an incremental snapshot to the slave using `zfs send':

     root-shell> zfs snapshot scratchpool@snap2
     root-shell> zfs send -i scratchpool@snap1 scratchpool@snap2|ssh ID@HOST pfexec zfs recv slavepool

Doublecheck that the slave has the data by looking at the MySQL data
directory on the `slavepool':

     root-shell> ls -al /slavepool/mysql-data/

Now you can start up MySQL, create some data, and then replicate the
changes using `zfs send'/` zfs recv' to the slave to synchronize the
changes.

The rate at which you perform the synchronization depends on your
application and environment. The limitation is the speed required to
perform the snapshot and then to send the changes over the network.

To automate the process, create a script that performs the snapshot,
send, and receive operation, and use `cron' to synchronize the changes
at set times or intervals.


File: manual.info,  Node: ha-zfs-mysql-recovery,  Prev: ha-zfs-mysql,  Up: ha-zfs-replication

15.5.3 Handling MySQL Recovery with ZFS
---------------------------------------

When using ZFS replication to provide a constant copy of your data,
ensure that you can recover your tables, either manually or
automatically, in the event of a failure of the original system.

In the event of a failure, follow this sequence:

  1. Stop the script on the master, if it is still up and running.

  2. Set the slave file system to be read/write:

          root-shell> zfs set readonly=off slavepool

  3. Start up *Note `mysqld': mysqld. on the slave. If you are using
     `InnoDB', you get auto-recovery, if it is needed, to make sure the
     table data is correct, as shown here when I started up from our
     mid-INSERT snapshot:

          InnoDB: The log sequence number in ibdata files does not match
          InnoDB: the log sequence number in the ib_logfiles!
          081109 15:59:59  InnoDB: Database was not shut down normally!
          InnoDB: Starting crash recovery.
          InnoDB: Reading tablespace information from the .ibd files...
          InnoDB: Restoring possible half-written data pages from the doublewrite
          InnoDB: buffer...
          081109 16:00:03  InnoDB: Started; log sequence number 0 1142807951
          081109 16:00:03 [Note] /slavepool/mysql-5.0.67-solaris10-i386/bin/mysqld: ready for connections.
          Version: '5.0.67'  socket: '/tmp/mysql.sock'  port: 3306  MySQL Community Server (GPL)

Use *Note `InnoDB': innodb-storage-engine. tables and a regular
synchronization schedule to reduce the risk for significant data loss.
On MyISAM tables, you might need to run *Note `REPAIR TABLE':
repair-table, and you might even have lost some information.


File: manual.info,  Node: ha-memcached,  Next: mysql-proxy,  Prev: ha-zfs-replication,  Up: ha-overview

15.6 Using MySQL with `memcached'
=================================

* Menu:

* ha-memcached-install::         Installing `memcached'
* ha-memcached-using::           Using `memcached'
* ha-memcached-interfaces::      Developing a `memcached' Application
* ha-memcached-stats::           Getting `memcached' Statistics
* ha-memcached-faq::             `memcached' FAQ

`memcached' is a simple, highly scalable key-based cache that stores
data and objects wherever dedicated or spare RAM is available for quick
access by applications, without going through layers of parsing or disk
I/O. To use, you run the `memcached' command on one or more hosts and
then use the shared cache to store objects. For more usage instructions,
see *Note ha-memcached-using::

Benefits of using `memcached' include:

   * Because all information is stored in RAM, the access speed is
     faster than loading the information each time from disk.

   * Because the `value' portion of the key-value pair does not have
     any data type restrictions, you can cache data such as complex
     structures, documents, images, or a mixture of such things.

   * If you use the in-memory cache to hold transient information, or
     as a read-only cache for information also stored in a database,
     the failure of any `memcached' server is not critical. For
     persistent data, you can fall back to an alternative lookup method
     using database queries, and reload the data into RAM on a
     different server.

The typical usage environment is to modify your application so that
information is read from the cache provided by `memcached'. If the
information is not in `memcached', then the data is loaded from the
MySQL database and written into the cache so that future requests for
the same object benefit from the cached data.

For a typical deployment layout, see *Note ha-memcached-fig-overview::.

FIGURE GOES HERE: `memcached' Architecture Overview

In the example structure, any of the clients can contact one of the
`memcached' servers to request a given key. Each client is configured
to talk to all of the servers shown in the illustration. Within the
client, when the request is made to store the information, the key used
to reference the data is hashed and this hash is then used to select
one of the `memcached' servers. The selection of the `memcached' server
takes place on the client before the server is contacted, keeping the
process lightweight.

The same algorithm is used again when a client requests the same key.
The same key generates the same hash, and the same `memcached' server
is selected as the source for the data. Using this method, the cached
data is spread among all of the `memcached' servers, and the cached
information is accessible from any client. The result is a distributed,
memory-based, cache that can return information, particularly complex
data and structures, much faster than natively reading the information
from the database.

The data held within a traditional `memcached' server is never stored
on disk (only in RAM, which means there is no persistence of data), and
the RAM cache is always populated from the backing store (a MySQL
database). If a `memcached' server fails, the data can always be
recovered from the MySQL database.


File: manual.info,  Node: ha-memcached-install,  Next: ha-memcached-using,  Prev: ha-memcached,  Up: ha-memcached

15.6.1 Installing `memcached'
-----------------------------

You can build and install `memcached' from the source code directly, or
you can use an existing operating system package or installation.

*Installing `memcached' from a Binary Distribution*

To install `memcached' on a Red Hat, or Fedora host, use `yum':

     root-shell> yum install memcached

*Note*:

On CentOS, you may be able to obtain a suitable RPM from another
source, or use the source tarball.

To install `memcached' on a Debian or Ubuntu host, use `apt-get':

     root-shell> apt-get install memcached

To install `memcached' on a Gentoo host, use `emerge':

     root-shell> emerge install memcached

*Building `memcached' from Source*

On other Unix-based platforms, including Solaris, AIX, HP-UX and Mac OS
X, and Linux distributions not mentioned already, you must install from
source. For Linux, make sure you have a 2.6-based kernel, which
includes the improved `epoll' interface. For all platforms, ensure that
you have `libevent' 1.1 or higher installed. You can obtain `libevent'
from `libevent' web page (http://www.monkey.org/~provos/libevent/).

You can obtain the source for `memcached' from `memcached' Web site
(http://www.danga.com/memcached).

To build `memcached', follow these steps:

  1. Extract the `memcached' source package:

          shell> gunzip -c memcached-1.2.5.tar.gz | tar xf -

  2. Change to the `memcached-1.2.5 directory:'

          shell> cd memcached-1.2.5

  3. Run `configure'

          shell> ./configure

     Some additional options you might specify to the `configure':

        * `--prefix'

          To specify a different installation directory, use the
          `--prefix' option:

               shell> ./configure --prefix=/opt

          The default is to use the `/usr/local' directory.

        * `--with-libevent'

          If you have installed `libevent' and `configure' cannot find
          the library, use the `--with-libevent' option to specify the
          location of the installed library.

        * `--enable-64bit'

          To build a 64-bit version of `memcached' (which enables you
          to use a single instance with a large RAM allocation), use
          `--enable-64bit'.

        * `--enable-threads'

          To enable multi-threading support in `memcached', which
          improves the response times on servers with a heavy load, use
          `--enable-threads'. You must have support for the POSIX
          threads within your operating system to enable thread
          support. For more information on the threading support, see
          *Note ha-memcached-using-threads::.

        * `--enable-dtrace'

          `memcached' includes a range of DTrace threads that can be
          used to monitor and benchmark a `memcached' instance. For more
          information, see *Note ha-memcached-using-dtrace::.

  4. Run `make' to build `memcached':

          shell> make

  5. Run `make install' to install `memcached':

          shell> make install


File: manual.info,  Node: ha-memcached-using,  Next: ha-memcached-interfaces,  Prev: ha-memcached-install,  Up: ha-memcached

15.6.2 Using `memcached'
------------------------

* Menu:

* ha-memcached-using-deployment::  `memcached' Deployment
* ha-memcached-using-namespaces::  Using Namespaces
* ha-memcached-using-expiry::    Data Expiry
* ha-memcached-using-hashtypes::  `memcached' Hashing/Distribution Types
* ha-memcached-using-dtrace::    Using `memcached' and DTrace
* ha-memcached-using-memory::    Memory Allocation within `memcached'
* ha-memcached-using-threads::   `memcached' Thread Support
* ha-memcached-using-logs::      `memcached' Logs

To start using `memcached', start the `memcached' service on one or
more servers.  Running `memcached' sets up the server, allocates the
memory and starts listening for connections from clients.

*Note*:

You do not need to be a privileged user (`root') to run `memcached'
except to listen on one of the privileged TCP/IP ports (below 1024).
You must, however, use a user that has not had their memory limits
restricted using `setrlimit' or similar.

To start the server, run `memcached' as a nonprivileged (that is,
non-`root') user:

     shell> memcached

By default, `memcached' uses the following settings:

   * Memory allocation of 64MB

   * Listens for connections on all network interfaces, using port 11211

   * Supports a maximum of 1024 simultaneous connections

Typically, you would specify the full combination of options that you
want when starting `memcached', and normally provide a startup script
to handle the initialization of `memcached'. For example, the following
line starts `memcached' with a maximum of 1024MB RAM for the cache,
listening on port 11211 on the IP address 192.168.0.110, running as a
background daemon:

     shell> memcached -d -m 1024 -p 11211 -l 192.168.0.110

To ensure that `memcached' is started up on boot, check the init script
and configuration parameters.

`memcached' supports the following options:

   * `-u user'

     If you start `memcached' as `root', use the `-u' option to specify
     the user for executing `memcached':

          shell> memcached -u memcache

   * `-m memory'

     Set the amount of memory allocated to `memcached' for object
     storage. Default is 64MB.

     To increase the amount of memory allocated for the cache, use the
     `-m' option to specify the amount of RAM to be allocated (in
     megabytes). The more RAM you allocate, the more data you can store
     and therefore the more effective your cache is.

     *Warning*:

     Do not specify a memory allocation larger than your available RAM.
     If you specify too large a value, then some RAM allocated for
     `memcached' uses swap space, and not physical RAM. This may lead
     to delays when storing and retrieving values, because data is
     swapped to disk, instead of storing the data directly in RAM.

     You can use the output of the `vmstat' command to get the free
     memory, as shown in `free' column:

          shell> vmstat
          kthr      memory            page            disk          faults      cpu
          r b w   swap  free  re  mf pi po fr de sr s1 s2 -- --   in   sy   cs us sy id
          0 0 0 5170504 3450392 2  7  2  0  0  0  4  0  0  0  0  296   54  199  0  0 100

     For example, to allocate 3GB of RAM:

          shell> memcached -m 3072

     On 32-bit x86 systems where you are using PAE to access memory
     above the 4GB limit, you cannot allocate RAM beyond the maximum
     process size. You can get around this by running multiple
     instances of `memcached', each listening on a different port:

          shell> memcached -m 1024 -p11211
          shell> memcached -m 1024 -p11212
          shell> memcached -m 1024 -p11213

     *Note*:

     On all systems, particularly 32-bit, ensure that you leave enough
     room for both `memcached' application in addition to the memory
     setting. For example, if you have a dedicated `memcached' host
     with 4GB of RAM, do not set the memory size above 3500MB.  Failure
     to do this may cause either a crash or severe performance issues.

   * `-l interface'

     Specify a network interface/address to listen for connections.
     The default is to listen on all available address (`INADDR_ANY').

          shell> memcached -l 192.168.0.110

     Support for IPv6 address support was added in `memcached' 1.2.5.

   * `-p port'

     Specify the TCP port to use for connections. Default is 18080.

          shell> memcached -p 18080

   * `-U port'

     Specify the UDP port to use for connections. Default is 11211, 0
     switches UDP off.

          shell> memcached -U 18080

   * `-s socket'

     Specify a Unix socket to listen on.

     If you are running `memcached' on the same server as the clients,
     you can disable the network interface and use a local Unix socket
     using the `-s' option:

          shell> memcached -s /tmp/memcached

     Using a Unix socket automatically disables network support, and
     saves network ports (allowing more ports to be used by your web
     server or other process).

   * `-a mask'

     Specify the access mask to be used for the Unix socket, in octal.
     Default is 0700.

   * `-c connections'

     Specify the maximum number of simultaneous connections to the
     `memcached' service. The default is 1024.

          shell> memcached -c 2048

     Use this option, either to reduce the number of connections (to
     prevent overloading `memcached' service) or to increase the number
     to make more effective use of the server running `memcached'
     server.

   * `-t threads'

     Specify the number of threads to use when processing incoming
     requests.

     By default, `memcached' is configured to use 4 concurrent threads.
     The threading improves the performance of storing and retrieving
     data in the cache, using a locking system to prevent different
     threads overwriting or updating the same values. To increase or
     decrease the number of threads, use the `-t' option:

          shell> memcached -t 8

   * `-d'

     Run `memcached' as a daemon (background) process:

          shell> memcached -d

   * `-r'

     Maximize the size of the core file limit. In the event of a
     failure, this attempts to dump the entire memory space to disk as
     a core file, up to any limits imposed by `setrlimit'.

   * `-M'

     Return an error to the client when the memory has been exhausted.
     This replaces the normal behavior of removing older items from the
     cache to make way for new items.

   * `-k'

     Lock down all paged memory. This reserves the memory before use,
     instead of allocating new slabs of memory as new items are stored
     in the cache.

     *Note*:

     There is a user-level limit on how much memory you can lock.
     Trying to allocate more than the available memory fails. You can
     set the limit for the user you started the daemon with (not for
     the `-u user' user) within the shell by using `ulimit -S -l NUM_KB'

   * `-v'

     Verbose mode. Prints errors and warnings while executing the main
     event loop.

   * `-vv'

     Very verbose mode. In addition to information printed by `-v',
     also prints each client command and the response.

   * `-vvv'

     Extremely verbose mode. In addition to information printed by
     `-vv', also show the internal state transitions.

   * `-h'

     Print the help message and exit.

   * `-i'

     Print the `memcached' and `libevent' license.

   * `-I mem'

     Specify the maximum size permitted for storing an object within
     the `memcached' instance. The size supports a unit postfix (`k'
     for kilobytes, `m' for megabytes). For example, to increase the
     maximum supported object size to 32MB:

          shell> memcached -I 32m

     The maximum object size you can specify is 128MB, the default
     remains at 1MB.

     This option was added in 1.4.2.

   * `-b'

     Set the backlog queue limit. The backlog queue configures how many
     network connections can be waiting to be processed by `memcached'.
     Increasing this limit may reduce errors received by the client
     that it is not able to connect to the `memcached' instance, but
     does not improve the performance of the server. The default is
     1024.

   * `-P pidfile'

     Save the process ID of the `memcached' instance into `file'.

   * `-f'

     Set the chunk size growth factor. When allocating new memory
     chunks, the allocated size of new chunks is determined by
     multiplying the default slab size by this factor.

     To see the effects of this option without extensive testing, use
     the `-vv' command-line option to show the calculated slab sizes.
     For more information, see *Note ha-memcached-using-logs::.

   * `-n bytes'

     The minimum space allocated for the key+value+flags information.
     The default is 48 bytes.

   * `-L'

     On systems that support large memory pages, enables large memory
     page use. Using large memory pages enables `memcached' to allocate
     the item cache in one large chunk, which can improve the
     performance by reducing the number misses when accessing memory.

   * `-C'

     Disable the use of compare and swap (CAS) operations.

     This option was added in `memcached' 1.3.x.

   * `-D char'

     Set the default character to be used as a delimiter between the
     key prefixes and IDs. This is used for the per-prefix statistics
     reporting (see *Note ha-memcached-stats::). The default is the
     colon (`:'). If this option is used, statistics collection is
     turned on automatically. If not used, you can enable stats
     collection by sending the `stats detail on' command to the server.

     This option was added in `memcached' 1.3.x.

   * `-R num'

     Sets the maximum number of requests per event process. The default
     is 20.

   * `-B protocol'

     Set the binding protocol, that is, the default `memcached'
     protocol support for client connections. Options are `ascii',
     `binary' or `auto'.  Automatic (`auto') is the default.

     This option was added in `memcached' 1.4.0.


File: manual.info,  Node: ha-memcached-using-deployment,  Next: ha-memcached-using-namespaces,  Prev: ha-memcached-using,  Up: ha-memcached-using

15.6.2.1 `memcached' Deployment
...............................

When using `memcached' you can use a number of different potential
deployment strategies and topologies. The exact strategy to use depends
on your application and environment. When developing a system for
deploying `memcached' within your system, keep in mind the following
points:

   * `memcached' is only a caching mechanism. It shouldn't be used to
     store information that you cannot otherwise afford to lose and
     then load from a different location.

   * There is no security built into the `memcached' protocol. At a
     minimum, make sure that the servers running `memcached' are only
     accessible from inside your network, and that the network ports
     being used are blocked (using a firewall or similar). If the
     information on the `memcached' servers that is being stored is any
     sensitive, then encrypt the information before storing it in
     `memcached'.

   * `memcached' does not provide any sort of failover. Because there
     is no communication between different `memcached' instances. If an
     instance fails, your application must capable of removing it from
     the list, reloading the data and then writing data to another
     `memcached' instance.

   * Latency between the clients and the `memcached' can be a problem
     if you are using different physical machines for these tasks. If
     you find that the latency is a problem, move the `memcached'
     instances to be on the clients.

   * Key length is determined by the `memcached' server. The default
     maximum key size is 250 bytes.

   * Try to use at least two `memcached' instances, especially for
     multiple clients, to avoid having a single point of failure.
     Ideally, create as many `memcached' nodes as possible. When adding
     and removing `memcached' instances from a pool, the hashing and
     distribution of key/value pairs may be affected. For information
     on how to avoid problems, see *Note ha-memcached-using-hashtypes::.


File: manual.info,  Node: ha-memcached-using-namespaces,  Next: ha-memcached-using-expiry,  Prev: ha-memcached-using-deployment,  Up: ha-memcached-using

15.6.2.2 Using Namespaces
.........................

The `memcached' cache is a very simple massive key/value storage
system, and as such there is no way of compartmentalizing data
automatically into different sections.  For example, if you are storing
information by the unique ID returned from a MySQL database, then
storing the data from two different tables could run into issues
because the same ID might be valid in both tables.

Some interfaces provide an automated mechanism for creating
_namespaces_ when storing information into the cache. In practice,
these namespaces are merely a prefix before a given ID that is applied
every time a value is stored or retrieve from the cache.

You can implement the same basic principle by using keys that describe
the object and the unique identifier within the key that you supply
when the object is stored. For example, when storing user data, prefix
the ID of the user with `user:' or `user-'.

*Note*:

Using namespaces or prefixes only controls the keys stored/retrieved.
There is no security within `memcached', and therefore no way to enforce
that a particular client only accesses keys with a particular
namespace. Namespaces are only useful as a method of identifying data
and preventing corruption of key/value pairs.


File: manual.info,  Node: ha-memcached-using-expiry,  Next: ha-memcached-using-hashtypes,  Prev: ha-memcached-using-namespaces,  Up: ha-memcached-using

15.6.2.3 Data Expiry
....................

There are two types of data expiry within a `memcached' instance. The
first type is applied at the point when you store a new key/value pair
into the `memcached' instance. If there is not enough space within a
suitable slab to store the value, then an existing least recently used
(LRU) object is removed (evicted) from the cache to make room for the
new item.

The LRU algorithm ensures that the object that is removed is one that
is either no longer in active use or that was used so long ago that its
data is potentially out of date or of little value.  However, in a
system where the memory allocated to `memcached' is smaller than the
number of regularly used objects required in the cache, a lot of expired
items could be removed from the cache even though they are in active
use. You use the statistics mechanism to get a better idea of the level
of evictions (expired objects). For more information, see *Note
ha-memcached-stats::.

You can change this eviction behavior by setting the `-M' command-line
option when starting `memcached'. This option forces an error to be
returned when the memory has been exhausted, instead of automatically
evicting older data.

The second type of expiry system is an explicit mechanism that you can
set when a key/value pair is inserted into the cache, or when deleting
an item from the cache. Using an expiration time can be a useful way of
ensuring that the data in the cache is up to date and in line with your
application needs and requirements.

A typical scenario for explicitly setting the expiry time might include
caching session data for a user when accessing a Web site. `memcached'
uses a lazy expiry mechanism where the explicit expiry time that has
been set is compared with the current time when the object is
requested. Only objects that have not expired are returned.

You can also set the expiry time when explicitly deleting an object
from the cache. In this case, the expiry time is really a timeout and
indicates the period when any attempts to set the value for a given key
are rejected.


File: manual.info,  Node: ha-memcached-using-hashtypes,  Next: ha-memcached-using-dtrace,  Prev: ha-memcached-using-expiry,  Up: ha-memcached-using

15.6.2.4 `memcached' Hashing/Distribution Types
...............................................

The `memcached' client interface supports a number of different
distribution algorithms that are used in multi-server configurations to
determine which host should be used when setting or getting data from a
given `memcached' instance. When you get or set a value, a hash is
constructed from the supplied key and then used to select a host from
the list of configured servers. Because the hashing mechanism uses the
supplied key as the basis for the hash, the same server is selected
during both set and get operations.

You can think of this process as follows. Given an array of servers (a,
b, and c), the client uses a hashing algorithm that returns an integer
based on the key being stored or retrieved.  The resulting value is
then used to select a server from the list of servers configured in the
client. Most standard client hashing within `memcache' clients uses a
simple modulus calculation on the value against the number of
configured `memcached' servers. You can summarize the process in
pseudocode as:

     @memcservers = ['a.memc','b.memc','c.memc'];
     $value = hash($key);
     $chosen = $value % length(@memcservers);

Replacing the above with values:

     @memcservers = ['a.memc','b.memc','c.memc'];
     $value = hash('myid');
     $chosen = 7009 % 3;

In the above example, the client hashing algorithm chooses the server
at index 1 (`7009 % 3 = 1'), and store or retrieve the key and value
with that server.

*Note*:

This selection and hashing process is handled automatically by the
`memcached' client you are using; you need only provide the list of
`memcached' servers to use.

You can see a graphical representation of this below in *Note
ha-memcached-using-hashtypes-fig-selection::.

FIGURE GOES HERE: `memcached' Hash Selection

The same hashing and selection process takes place during any operation
on the specified key within the `memcached' client.

Using this method provides a number of advantages:

   * The hashing and selection of the server to contact is handled
     entirely within the client. This eliminates the need to perform
     network communication to determine the right machine to contact.

   * Because the determination of the `memcached' server occurs
     entirely within the client, the server can be selected
     automatically regardless of the operation being executed (set, get,
     increment, etc.).

   * Because the determination is handled within the client, the
     hashing algorithm returns the same value for a given key; values
     are not affected or reset by differences in the server environment.

   * Selection is very fast. The hashing algorithm on the key value is
     quick and the resulting selection of the server is from a simple
     array of available machines.

   * Using client-side hashing simplifies the distribution of data over
     each `memcached' server. Natural distribution of the values
     returned by the hashing algorithm means that keys are
     automatically spread over the available servers.

Providing that the list of servers configured within the client remains
the same, the same stored key returns the same value, and therefore
selects the same server.

However, if you do not use the same hashing mechanism then the same
data may be recorded on different servers by different interfaces, both
wasting space on your `memcached' and leading to potential differences
in the information.

*Note*:

One way to use a multi-interface compatible hashing mechanism is to use
the `libmemcached' library and the associated interfaces. Because the
interfaces for the different languages (including C, Ruby, Perl and
Python) use the same client library interface, they always generate the
same hash code from the ID.

The problem with client-side selection of the server is that the list
of the servers (including their sequential order) _must_ remain
consistent on each client using the `memcached' servers, and the
servers must be available. If you try to perform an operation on a key
when:

   * A new `memcached' instance has been added to the list of available
     instances

   * A `memcached' instance has been removed from the list of available
     instances

   * The order of the `memcached' instances has changed

When the hashing algorithm is used on the given key, but with a
different list of servers, the hash calculation may choose a different
server from the list.

If a new `memcached' instance is added into the list of servers, as
`new.memc' is in the example below, then a GET operation using the same
key, `myid', can result in a cache-miss. This is because the same value
is computed from the key, which selects the same index from the array
of servers, but index 2 now points to the new server, not the server
`c.memc' where the data was originally stored. This would result in a
cache miss, even though the key exists within the cache on another
`memcached' instance.

FIGURE GOES HERE: `memcached' Hash Selection with New `memcached'
instance

This means that servers `c.memc' and `new.memc ' both contain the
information for key `myid', but the information stored against the key
in eachs server may be different in each instance. A more significant
problem is a much higher number of cache-misses when retrieving data,
as the addition of a new server changes the distribution of keys, and
this in turn requires rebuilding the cached data on the `memcached'
instances, causing an increase in database reads.

The same effect can occur if you actively manage the list of servers
configured in your clients, adding and removing the configured
`memcached' instances as each instance is identified as being
available. For example, removing a `memcached' instance when the client
notices that the instance can no longer be contacted can cause the
server selection to fail as described here.

To prevent this causing significant problems and invalidating your
cache, you can select the hashing algorithm used to select the server.
There are two common types of hashing algorithm, _consistent_ and
_modula_.

With _consistent_ hashing algorithms, the same key when applied to a
list of servers always uses the same server to store or retrieve the
keys, even if the list of configured servers changes. This means that
you can add and remove servers from the configure list and always use
the same server for a given key. There are two types of consistent
hashing algorithms available, Ketama and Wheel. Both types are
supported by `libmemcached', and implementations are available for PHP
and Java.

Any consistent hashing algorithm has some limitations. When you add
servers to an existing list of configured servers, keys are distributed
to the new servers as part of the normal distribution. When you remove
servers from the list, the keys are re-allocated to another server
within the list, meaning that the cache needs to be re-populated with
the information. Also, a consistent hashing algorithm does not resolve
the issue where you want consistent selection of a server across
multiple clients, but where each client contains a different list of
servers. The consistency is enforced only within a single client.

With a _modula_ hashing algorithm, the client selects a server by first
computing the hash and then choosing a server from the list of
configured servers. As the list of servers changes, so the server
selected when using a modula hashing algorithm also changes. The result
is the behavior described above; changes to the list of servers mean
that different servers are selected when retrieving data, leading to
cache misses and increase in database load as the cache is re-seeded
with information.

If you use only a single `memcached' instance for each client, or your
list of `memcached' servers configured for a client never changes, then
the selection of a hashing algorithm is irrelevant, as it has no
noticeable effect.

If you change your servers regularly, or you use a common set of
servers that are shared among a large number of clients, then using a
consistent hashing algorithm should help to ensure that your cache data
is not duplicated and the data is evenly distributed.


File: manual.info,  Node: ha-memcached-using-dtrace,  Next: ha-memcached-using-memory,  Prev: ha-memcached-using-hashtypes,  Up: ha-memcached-using

15.6.2.5 Using `memcached' and DTrace
.....................................

`memcached' includes a number of different DTrace probes that can be
used to monitor the operation of the server. The probes included can
monitor individual connections, slab allocations, and modifications to
the hash table when a key/value pair is added, updated, or removed.

For more information on DTrace and writing DTrace scripts, read the
DTrace User Guide (http://docs.oracle.com/cd/E19253-01/819-5488/).

Support for DTrace probes was added to `memcached' 1.2.6 includes a
number of DTrace probes that can be used to help monitor your
application. DTrace is supported on Solaris 10, OpenSolaris, Mac OS X
10.5 and FreeBSD. To enable the DTrace probes in `memcached', build
from source and use the `--enable-dtrace' option. For more information,
see *Note ha-memcached-install::.

The probes supported by `memcached' are:

   * `conn-allocate(connid)'

     Fired when a connection object is allocated from the connection
     pool.

        * `connid': The connection ID.

   * `conn-release(connid)'

     Fired when a connection object is released back to the connection
     pool.

     Arguments:

        * `connid': The connection ID.

   * `conn-create(ptr)'

     Fired when a new connection object is being created (that is,
     there are no free connection objects in the connection pool).

     Arguments:

        * `ptr': A pointer to the connection.  object

   * `conn-destroy(ptr)'

     Fired when a connection object is being destroyed.

     Arguments:

        * `ptr': A pointer to the connection object.

   * `conn-dispatch(connid, threadid)'

     Fired when a connection is dispatched from the main or
     connection-management thread to a worker thread.

     Arguments:

        * `connid': The connection ID.

        * `threadid': The thread ID.

   * `slabs-allocate(size, slabclass, slabsize, ptr)'

     Allocate memory from the slab allocator.

     Arguments:

        * `size': The requested size.

        * `slabclass': The allocation is fulfilled in this class.

        * `slabsize': The size of each item in this class.

        * `ptr': A pointer to allocated memory.

   * `slabs-allocate-failed(size, slabclass)'

     Failed to allocate memory (out of memory).

     Arguments:

        * `size': The requested size.

        * `slabclass': The class that failed to fulfill the request.

   * `slabs-slabclass-allocate(slabclass)'

     Fired when a slab class needs more space.

     Arguments:

        * `slabclass': The class that needs more memory.

   * `slabs-slabclass-allocate-failed(slabclass)'

     Failed to allocate memory (out of memory).

     Arguments:

        * `slabclass': The class that failed to grab more memory.

   * `slabs-free(size, slabclass, ptr)'

     Release memory.

     Arguments:

        * `size': The amount of memory to release, in bytes.

        * `slabclass': The class the memory belongs to.

        * `ptr': A pointer to the memory to release.

   * `assoc-find(key, depth)'

     Fired when we have searched the hash table for a named key.  These
     two elements provide an insight into how well the hash function
     operates. Traversals are a sign of a less optimal function,
     wasting CPU capacity.

     Arguments:

        * `key': The key searched for.

        * `depth': The depth in the list of hash table.

   * `assoc-insert(key, nokeys)'

     Fired when a new item has been inserted.

     Arguments:

        * `key': The key just inserted.

        * `nokeys': The total number of keys currently being stored,
          including the key for which insert was called.

   * `assoc-delete(key, nokeys)'

     Fired when a new item has been removed.

     Arguments:

        * `key': The key just deleted.

        * `nokeys': The total number of keys currently being stored,
          excluding the key for which delete was called.

   * `item-link(key, size)'

     Fired when an item is being linked in the cache.

     Arguments:

        * `key': The items key.

        * `size': The size of the data.

   * `item-unlink(key, size)'

     Fired when an item is being deleted.

     Arguments:

        * `key': The items key.

        * `size': The size of the data.

   * `item-remove(key, size)'

     Fired when the refcount for an item is reduced.

     Arguments:

        * `key': The item's key.

        * `size': The size of the data.

   * `item-update(key, size)'

     Fired when the "last referenced" time is updated.

     Arguments:

        * `key': The item's key.

        * `size': The size of the data.

   * `item-replace(oldkey, oldsize, newkey, newsize)'

     Fired when an item is being replaced with another item.

     Arguments:

        * `oldkey': The key of the item to replace.

        * `oldsize': The size of the old item.

        * `newkey': The key of the new item.

        * `newsize': The size of the new item.

   * `process-command-start(connid, request, size)'

     Fired when the processing of a command starts.

     Arguments:

        * `connid': The connection ID.

        * `request': The incoming request.

        * `size': The size of the request.

   * `process-command-end(connid, response, size)'

     Fired when the processing of a command is done.

     Arguments:

        * `connid': The connection ID.

        * `response': The response to send back to the client.

        * `size': The size of the response.

   * `command-get(connid, key, size)'

     Fired for a `get' command.

     Arguments:

        * `connid': The connection ID.

        * `key': The requested key.

        * `size': The size of the key's data (or -1 if not found).

   * `command-gets(connid, key, size, casid)'

     Fired for a `gets' command.

     Arguments:

        * `connid': The connection ID.

        * `key': The requested key.

        * `size': The size of the key's data (or -1 if not found).

        * `casid': The casid for the item.

   * `command-add(connid, key, size)'

     Fired for a `add' command.

     Arguments:

        * `connid': The connection ID.

        * `key': The requested key.

        * `size': The new size of the key's data (or -1 if not found).

   * `command-set(connid, key, size)'

     Fired for a `set' command.

     Arguments:

        * `connid': The connection ID.

        * `key': The requested key.

        * `size': The new size of the key's data (or -1 if not found).

   * `command-replace(connid, key, size)'

     Fired for a `replace' command.

     Arguments:

        * `connid': The connection ID.

        * `key': The requested key.

        * `size': The new size of the key's data (or -1 if not found).

   * `command-prepend(connid, key, size)'

     Fired for a `prepend' command.

     Arguments:

        * `connid': The connection ID.

        * `key': The requested key.

        * `size': The new size of the key's data (or -1 if not found).

   * `command-append(connid, key, size)'

     Fired for a `append' command.

     Arguments:

        * `connid': The connection ID.

        * `key': The requested key.

        * `size': The new size of the key's data (or -1 if not found).

   * `command-cas(connid, key, size, casid)'

     Fired for a `cas' command.

     Arguments:

        * `connid': The connection ID.

        * `key': The requested key.

        * `size': The size of the key's data (or -1 if not found).

        * `casid': The cas ID requested.

   * `command-incr(connid, key, val)'

     Fired for `incr' command.

     Arguments:

        * `connid': The connection ID.

        * `key': The requested key.

        * `val': The new value.

   * `command-decr(connid, key, val)'

     Fired for `decr' command.

     Arguments:

        * `connid': The connection ID.

        * `key': The requested key.

        * `val': The new value.

   * `command-delete(connid, key, exptime)'

     Fired for a `delete' command.

     Arguments:

        * `connid': The connection ID.

        * `key': The requested key.

        * `exptime': The expiry time.


File: manual.info,  Node: ha-memcached-using-memory,  Next: ha-memcached-using-threads,  Prev: ha-memcached-using-dtrace,  Up: ha-memcached-using

15.6.2.6 Memory Allocation within `memcached'
.............................................

When you first start `memcached', the memory that you have configured
is not automatically allocated.  Instead, `memcached' only starts
allocating and reserving physical memory once you start saving
information into the cache.

When you start to store data into the cache, `memcached' does not
allocate the memory for the data on an item by item basis. Instead, a
slab allocation is used to optimize memory usage and prevent memory
fragmentation when information expires from the cache.

With slab allocation, memory is reserved in blocks of 1MB. The slab is
divided up into a number of blocks of equal size. When you try to store
a value into the cache, `memcached' checks the size of the value that
you are adding to the cache and determines which slab contains the
right size allocation for the item. If a slab with the item size
already exists, the item is written to the block within the slab.

If the new item is bigger than the size of any existing blocks, then a
new slab is created, divided up into blocks of a suitable size. If an
existing slab with the right block size already exists, but there are
no free blocks, a new slab is created. If you update an existing item
with data that is larger than the existing block allocation for that
key, then the key is re-allocated into a suitable slab.

For example, the default size for the smallest block is 88 bytes (40
bytes of value, and the default 48 bytes for the key and flag data). If
the size of the first item you store into the cache is less than 40
bytes, then a slab with a block size of 88 bytes is created and the
value stored.

If the size of the data that you intend to store is larger than this
value, then the block size is increased by the chunk size factor until
a block size large enough to hold the value is determined. The block
size is always a function of the scale factor, rounded up to a block
size which is exactly divisible into the chunk size.

For a sample of the structure, see *Note ha-memcached-fig-slabs::.

FIGURE GOES HERE: Memory Allocation in `memcached'

The result is that you have multiple pages allocated within the range
of memory allocated to `memcached'. Each page is 1MB in size (by
default), and is split into a different number of chunks, according to
the chunk size required to store the key/value pairs. Each instance has
multiple pages allocated, and a page is always created when a new item
needs to be created requiring a chunk of a particular size. A slab may
consist of multiple pages, and each page within a slab contains an equal
number of chunks.

The chunk size of a new slab is determined by the base chunk size
combined with the chunk size growth factor. For example, if the initial
chunks are 104 bytes in size, and the default chunk size growth factor
is used (1.25), then the next chunk size allocated would be the best
power of 2 fit for 104*1.25, or 136 bytes.

Allocating the pages in this way ensures that memory does not get
fragmented. However, depending on the distribution of the objects that
you store, it may lead to an inefficient distribution of the slabs and
chunks if you have significantly different sized items. For example,
having a relatively small number of items within each chunk size may
waste a lot of memory with just few chunks in each allocated page.

You can tune the growth factor to reduce this effect by using the `-f'
command line option, which adapts the growth factor applied to make
more effective use of the chunks and slabs allocated. For information
on how to determine the current slab allocation statistics, see *Note
ha-memcached-stats-slabs::.

If your operating system supports it, you can also start `memcached'
with the `-L' command line option. This option preallocates all the
memory during startup using large memory pages. This can improve
performance by reducing the number of misses in the CPU memory cache.


File: manual.info,  Node: ha-memcached-using-threads,  Next: ha-memcached-using-logs,  Prev: ha-memcached-using-memory,  Up: ha-memcached-using

15.6.2.7 `memcached' Thread Support
...................................

If you enable the thread implementation within when building
`memcached' from source, then `memcached' uses multiple threads in
addition to the `libevent' system to handle requests.

When enabled, the threading implementation operates as follows:

   * Threading is handled by wrapping functions within the code to
     provide basic protection from updating the same global structures
     at the same time.

   * Each thread uses its own instance of the `libevent' to help
     improve performance.

   * TCP/IP connections are handled with a single thread listening on
     the TCP/IP socket. Each connection is then distributed to one of
     the active threads on a simple round-robin basis. Each connection
     then operates solely within this thread while the connection
     remains open.

   * For UDP connections, all the threads listen to a single UDP socket
     for incoming requests. Threads that are not currently dealing with
     another request ignore the incoming packet. One of the remaining,
     nonbusy, threads reads the request and sends the response. This
     implementation can lead to increased CPU load as threads wake from
     sleep to potentially process the request.

Using threads can increase the performance on servers that have
multiple CPU cores available, as the requests to update the hash table
can be spread between the individual threads. To minimize overhead from
the locking mechanism employed, experiment with different thread values
to achieve the best performance based on the number and type of
requests within your given workload.


File: manual.info,  Node: ha-memcached-using-logs,  Prev: ha-memcached-using-threads,  Up: ha-memcached-using

15.6.2.8 `memcached' Logs
.........................

If you enable verbose mode, using the `-v', `-vv', or `-vvv' options,
then the information output by `memcached' includes details of the
operations being performed.

Without the verbose options, `memcached' normally produces no output
during normal operating.

   * *Output when using `-v'*

     The lowest verbosity level shows you:

        * Errors and warnings

        * Transient errors

        * Protocol and socket errors, including exhausting available
          connections

        * Each registered client connection, including the socket
          descriptor number and the protocol used.

          For example:

               32: Client using the ascii protocol
               33: Client using the ascii protocol

          Note that the socket descriptor is only valid while the
          client remains connected. Non-persistent connections may not
          be effectively represented.

     Examples of the error messages output at this level include:

          <%d send buffer was %d, now %d
          Can't listen for events on fd %d
          Can't read from libevent pipe
          Catastrophic: event fd doesn't match conn fd!
          Couldn't build response
          Couldn't realloc input buffer
          Couldn't update event
          Failed to build UDP headers
          Failed to read, and not due to blocking
          Too many open connections
          Unexpected state %d

   * *Output when using `-vv'*

     When using the second level of verbosity, you get more detailed
     information about protocol operations, keys updated, chunk and
     network operatings and details.

     During the initial start-up of `memcached' with this level of
     verbosity, you are shown the sizes of the individual slab classes,
     the chunk sizes, and the number of entries per slab. These do not
     show the allocation of the slabs, just the slabs that would be
     created when data is added. You are also given information about
     the listen queues and buffers used to send information. A sample
     of the output generated for a TCP/IP based system with the default
     memory and growth factors is given below:

          shell> memcached -vv
          slab class   1: chunk size     80 perslab 13107
          slab class   2: chunk size    104 perslab 10082
          slab class   3: chunk size    136 perslab  7710
          slab class   4: chunk size    176 perslab  5957
          slab class   5: chunk size    224 perslab  4681
          slab class   6: chunk size    280 perslab  3744
          slab class   7: chunk size    352 perslab  2978
          slab class   8: chunk size    440 perslab  2383
          slab class   9: chunk size    552 perslab  1899
          slab class  10: chunk size    696 perslab  1506
          slab class  11: chunk size    872 perslab  1202
          slab class  12: chunk size   1096 perslab   956
          slab class  13: chunk size   1376 perslab   762
          slab class  14: chunk size   1720 perslab   609
          slab class  15: chunk size   2152 perslab   487
          slab class  16: chunk size   2696 perslab   388
          slab class  17: chunk size   3376 perslab   310
          slab class  18: chunk size   4224 perslab   248
          slab class  19: chunk size   5280 perslab   198
          slab class  20: chunk size   6600 perslab   158
          slab class  21: chunk size   8256 perslab   127
          slab class  22: chunk size  10320 perslab   101
          slab class  23: chunk size  12904 perslab    81
          slab class  24: chunk size  16136 perslab    64
          slab class  25: chunk size  20176 perslab    51
          slab class  26: chunk size  25224 perslab    41
          slab class  27: chunk size  31536 perslab    33
          slab class  28: chunk size  39424 perslab    26
          slab class  29: chunk size  49280 perslab    21
          slab class  30: chunk size  61600 perslab    17
          slab class  31: chunk size  77000 perslab    13
          slab class  32: chunk size  96256 perslab    10
          slab class  33: chunk size 120320 perslab     8
          slab class  34: chunk size 150400 perslab     6
          slab class  35: chunk size 188000 perslab     5
          slab class  36: chunk size 235000 perslab     4
          slab class  37: chunk size 293752 perslab     3
          slab class  38: chunk size 367192 perslab     2
          slab class  39: chunk size 458992 perslab     2
          <26 server listening (auto-negotiate)
          <29 server listening (auto-negotiate)
          <30 send buffer was 57344, now 2097152
          <31 send buffer was 57344, now 2097152
          <30 server listening (udp)
          <30 server listening (udp)
          <31 server listening (udp)
          <30 server listening (udp)
          <30 server listening (udp)
          <31 server listening (udp)
          <31 server listening (udp)
          <31 server listening (udp)

     Using this verbosity level can be a useful way to check the
     effects of the growth factor used on slabs with different memory
     allocations, which in turn can be used to better tune the growth
     factor to suit the data you are storing in the cache. For example,
     if you set the growth factor to 4 (quadrupling the size of each
     slab):

          shell> memcached -f 4 -m 1g -vv
          slab class   1: chunk size     80 perslab 13107
          slab class   2: chunk size    320 perslab  3276
          slab class   3: chunk size   1280 perslab   819
          slab class   4: chunk size   5120 perslab   204
          slab class   5: chunk size  20480 perslab    51
          slab class   6: chunk size  81920 perslab    12
          slab class   7: chunk size 327680 perslab     3
          ...

     During use of the cache, this verbosity level also prints out
     detailed information on the storage and recovery of keys and other
     information. An example of the output during a typical set/get and
     increment/decrement operation is shown below.

          32: Client using the ascii protocol
          <32 set my_key 0 0 10
          >32 STORED
          <32 set object_key 1 0 36
          >32 STORED
          <32 get my_key
          >32 sending key my_key
          >32 END
          <32 get object_key
          >32 sending key object_key
          >32 END
          <32 set key 0 0 6
          >32 STORED
          <32 incr key 1
          >32 789544
          <32 decr key 1
          >32 789543
          <32 incr key 2
          >32 789545
          <32 set my_key 0 0 10
          >32 STORED
          <32 set object_key 1 0 36
          >32 STORED
          <32 get my_key
          >32 sending key my_key
          >32 END
          <32 get object_key
          >32 sending key object_key1 1 36

          >32 END
          <32 set key 0 0 6
          >32 STORED
          <32 incr key 1
          >32 789544
          <32 decr key 1
          >32 789543
          <32 incr key 2
          >32 789545

     During client communication, for each line, the initial character
     shows the direction of flow of the information.  The < for
     communication from the client to the `memcached' server and > for
     communication back to the client. The number is the numeric socket
     descriptor for the connection.

   * *Output when using `-vvv'*

     This level of verbosity includes the transitions of connections
     between different states in the event library while reading and
     writing content to/from the clients. It should be used to diagnose
     and identify issues in client communication. For example, you can
     use this information to determine if `memcached' is taking a long
     time to return information to the client, during the read of the
     client operation or before returning and completing the operation.
     An example of the typical sequence for a set operation is provided
     below:

          <32 new auto-negotiating client connection
          32: going from conn_new_cmd to conn_waiting
          32: going from conn_waiting to conn_read
          32: going from conn_read to conn_parse_cmd
          32: Client using the ascii protocol
          <32 set my_key 0 0 10
          32: going from conn_parse_cmd to conn_nread
          > NOT FOUND my_key
          >32 STORED
          32: going from conn_nread to conn_write
          32: going from conn_write to conn_new_cmd
          32: going from conn_new_cmd to conn_waiting
          32: going from conn_waiting to conn_read
          32: going from conn_read to conn_closing
          <32 connection closed.

All of the verbosity levels in `memcached' are designed to be used
during debugging or examination of issues.  The quantity of information
generated, particularly when using `-vvv', is significant, particularly
on a busy server. Also be aware that writing the error information out,
especially to disk, may negate some of the performance gains you
achieve by using `memcached'. Therefore, use in production or
deployment environments is not recommended.


File: manual.info,  Node: ha-memcached-interfaces,  Next: ha-memcached-stats,  Prev: ha-memcached-using,  Up: ha-memcached

15.6.3 Developing a `memcached' Application
-------------------------------------------

* Menu:

* ha-memcached-operations::      Basic `memcached' Operations
* ha-memcached-mysql-frontend::  Using `memcached' as a MySQL Caching Layer
* ha-memcached-interfaces-libmemcached::  Using `libmemcached' with C and C++
* ha-memcached-interfaces-perl::  Using MySQL and `memcached' with Perl
* ha-memcached-interfaces-python::  Using MySQL and `memcached' with Python
* ha-memcached-interfaces-php::  Using MySQL and `memcached' with PHP
* ha-memcached-interfaces-ruby::  Using MySQL and `memcached' with Ruby
* ha-memcached-interfaces-java::  Using MySQL and `memcached' with Java
* ha-memcached-interfaces-protocol::  Using the `memcached' TCP Text Protocol

A number of language interfaces let applications store and retrieve
information with `memcached' servers.  You can write `memcached'
applications in popular languages such as Perl, PHP, Python, Ruby, C,
and Java.

Data stored into a `memcached' server is referred to by a single string
(the key), with storage into the cache and retrieval from the cache
using the key as the reference. The cache therefore operates like a
large associative array or hash table.  It is not possible to structure
or otherwise organize the information stored in the cache. To emulate
database notions such as multiple tables or composite key values, you
must use encode the extra information into the strings used as keys.
For example, to store or look up the address corresponding to a specific
latitude and longitude, you might turn those two numeric values into a
single comma-separated string to use as a key.


File: manual.info,  Node: ha-memcached-operations,  Next: ha-memcached-mysql-frontend,  Prev: ha-memcached-interfaces,  Up: ha-memcached-interfaces

15.6.3.1 Basic `memcached' Operations
.....................................

The interface to `memcached' supports the following methods for storing
and retrieving information in the cache, and these are consistent
across all the different APIs, although the language specific mechanics
might be different:

   * `get(KEY)': Retrieves information from the cache. Returns the value
     associated with the key if the specified key exists. Returns
     `NULL', `nil', `undefined', or the closest equivalent in the
     corresponding language, if the specified key does not exist.

   * `set(KEY, VALUE [, EXPIRY])': Sets the item associated with a key
     in the cache to the specified value. Note that this either updates
     an existing item if the key already exists, or adds a new
     key/value pair if the key doesn't exist. If the expiry time is
     specified, then the item expires (and is deleted) when the expiry
     time is reached. The time is specified in seconds, and is taken as
     a relative time if the value is less than 30 days (30*24*60*60),
     or an absolute time (epoch) if larger than this value.

   * `add(KEY, VALUE [, EXPIRY])': Adds the key and associated value to
     the cache, if the specified key does not already exist.

   * `replace(KEY, VALUE [, EXPIRY])': Replaces the item associated
     with the specified `key', only if the key already exists. The new
     value is given by the `value' parameter.

   * `delete(KEY [, TIME])': Deletes the `key' and its associated item
     from the cache. If you supply a `time', then adding another item
     with the specified `key' is blocked for the specified period.

   * `incr(KEY [, VALUE])': Increments the item associated with the
     `key' by one or the optional `value'.

   * `decr(KEY [, VALUE])': Decrements the item associated with the
     `key' by one or the optional `value'.

   * `flush_all': Invalidates (or expires) all the current items in the
     cache. Technically they still exist (they are not deleted), but
     they are silently destroyed the next time you try to access them.

In all implementations, most or all of these functions are duplicated
through the corresponding native language interface.

When practical, use `memcached' to store full items, rather than
caching a single column value from the database. For example, when
displaying a record about an object (invoice, user history, or blog
post), load all the data for the associated entry from the database,
and compile it into the internal structure that would normally be
required by the application. Save the complete object in the cache.

Complex data structures cannot be stored directly. Most interfaces
serialize the data for you, that is, put it in a textual form that can
reconstruct the original pointers and nesting. Perl uses `Storable',
PHP uses `serialize', Python uses `cPickle' (or `Pickle') and Java uses
the `Serializable' interface. In most cases, the serialization
interface used is customizable. To share data stored in `memcached'
instances between different language interfaces, consider using a common
serialization solution such as JSON (Javascript Object Notation).


File: manual.info,  Node: ha-memcached-mysql-frontend,  Next: ha-memcached-interfaces-libmemcached,  Prev: ha-memcached-operations,  Up: ha-memcached-interfaces

15.6.3.2 Using `memcached' as a MySQL Caching Layer
...................................................

When using `memcached' to cache MySQL data, your application must
retrieve data from the database and load the appropriate key-value
pairs into the cache. Then, subsequent lookups can be done directly
from the cache.

Because MySQL has its own in-memory caching mechanisms for queried
data, such as the `InnoDB' buffer pool and the MySQL query cache, look
for opportunities beyond loading individual column values or rows into
the cache. Prefer to cache composite values, such as those retrieved
from multiple tables through a join query, or result sets assembled
from multiple rows.

*Caution*:

Limit the information in the cache to non-sensitive data, because there
is no security required to access or update the information within a
`memcached' instance.  Anybody with access to the machine has the
ability to read, view and potentially update the information. To keep
the data secure, encrypt the information before caching it. To restrict
the users capable of connecting to the server, either disable network
access, or use IPTables or similar techniques to restrict access to the
`memcached' ports to a select set of hosts.

You can introduce `memcached' to an existing application, even if
caching was not part of the original design. In many languages and
environments the changes to the application will be just a few lines,
first to attempt to read from the cache when loading data, fall back to
the old method if the information is not cached, and to update the
cache with information once the data has been read.

The general sequence for using `memcached' in any language as a caching
solution for MySQL is as follows:

  1. Request the item from the cache.

  2. If the item exists, use the item data.

  3. If the item does not exist, load the data from MySQL, and store
     the value into the cache. This means the value is available to the
     next client that requests it from the cache.

For a flow diagram of this sequence, see *Note
ha-memcached-fig-basicflow::.

FIGURE GOES HERE: Typical `memcached' Application Flowchart

* Adapting Database Best Practices to `memcached' Applications *

The most direct way to cache MySQL data is to use a 2-column table,
where the first column is a primary key. Because of the uniqueness
requirements for `memcached' keys, make sure your database schema makes
appropriate use of primary keys and unique constraints.

If you combine multiple column values into a single `memcached' item
value, choose data types to make it easy to parse the value back into
its components, for example by using a separator character between
numeric values.

The queries that map most easily to `memcached' lookups are those with
a single `WHERE' clause, using an `=' or `IN' operator.  For
complicated `WHERE' clauses, or those using operators such as `<', `>',
`BETWEEN', or `LIKE', `memcached' does not provide a simple or
efficient way to scan through or filter the keys or associated values,
so typically you perform those operations as SQL queries on the
underlying database.


File: manual.info,  Node: ha-memcached-interfaces-libmemcached,  Next: ha-memcached-interfaces-perl,  Prev: ha-memcached-mysql-frontend,  Up: ha-memcached-interfaces

15.6.3.3 Using `libmemcached' with C and C++
............................................

* Menu:

* ha-memcached-interfaces-libmemcached-base::  `libmemcached' Base Functions
* ha-memcached-interfaces-libmemcached-servers::  `libmemcached' Server Functions
* ha-memcached-interfaces-libmemcached-set::  `libmemcached' Set Functions
* ha-memcached-interfaces-libmemcached-get::  `libmemcached' Get Functions
* ha-memcached-interfaces-libmemcached-behaviors::  Controlling `libmemcached' Behaviors
* ha-memcached-interfaces-libmemcached-utilities::  `libmemcached' Command-Line Utilities

The `libmemcached' library provides both C and C++ interfaces to
`memcached' and is also the basis for a number of different additional
API implementations, including Perl, Python and Ruby. Understanding the
core `libmemcached' functions can help when using these other
interfaces.

The C library is the most comprehensive interface library for
`memcached' and provides functions and operational systems not always
exposed in interfaces not based on the `libmemcached' library.

The different functions can be divided up according to their basic
operation. In addition to functions that interface to the core API, a
number of utility functions provide extended functionality, such as
appending and prepending data.

To build and install `libmemcached', download the `libmemcached'
package, run `configure', and then build and install:

     shell> tar xjf libmemcached-0.21.tar.gz
     shell> cd libmemcached-0.21
     shell> ./configure
     shell> make
     shell> make install

On many Linux operating systems, you can install the corresponding
`libmemcached' package through the usual `yum', `apt-get', or similar
commands.

To build an application that uses the library, first set the list of
servers. Either directly manipulate the servers configured within the
main `memcached_st' structure, or separately populate a list of
servers, and then add this list to the `memcached_st' structure.  The
latter method is used in the following example. Once the server list
has been set, you can call the functions to store or retrieve data. A
simple application for setting a preset value to `localhost' is
provided here:

     #include <stdio.h>
     #include <string.h>
     #include <unistd.h>
     #include <libmemcached/memcached.h>

     int main(int argc, char *argv[])
     {
       memcached_server_st *servers = NULL;
       memcached_st *memc;
       memcached_return rc;
       char *key= "keystring";
       char *value= "keyvalue";

       memcached_server_st *memcached_servers_parse (char *server_strings);
       memc= memcached_create(NULL);

       servers= memcached_server_list_append(servers, "localhost", 11211, &rc);
       rc= memcached_server_push(memc, servers);

       if (rc == MEMCACHED_SUCCESS)
         fprintf(stderr,"Added server successfully\n");
       else
         fprintf(stderr,"Couldn't add server: %s\n",memcached_strerror(memc, rc));

       rc= memcached_set(memc, key, strlen(key), value, strlen(value), (time_t)0, (uint32_t)0);

       if (rc == MEMCACHED_SUCCESS)
         fprintf(stderr,"Key stored successfully\n");
       else
         fprintf(stderr,"Couldn't store key: %s\n",memcached_strerror(memc, rc));

       return 0;
     }

To test the success of an operation, use the return value, or populated
result code, for a given function. The value is always set to
`MEMCACHED_SUCCESS' if the operation succeeded. In the event of a
failure, use the `memcached_strerror()' function to translate the
result code into a printable string.

To build the application, specify the `memcached' library:

     shell> gcc -o memc_basic memc_basic.c -lmemcached

Running the above sample application, after starting a `memcached'
server, should return a success message:

     shell> memc_basic
     Added server successfully
     Key stored successfully


File: manual.info,  Node: ha-memcached-interfaces-libmemcached-base,  Next: ha-memcached-interfaces-libmemcached-servers,  Prev: ha-memcached-interfaces-libmemcached,  Up: ha-memcached-interfaces-libmemcached

15.6.3.4 `libmemcached' Base Functions
......................................

The base `libmemcached' functions let you create, destroy and clone the
main `memcached_st' structure that is used to interface with the
`memcached' servers. The main functions are defined below:

     memcached_st *memcached_create (memcached_st *ptr);

Creates a new `memcached_st' structure for use with the other
`libmemcached' API functions. You can supply an existing, static,
`memcached_st' structure, or `NULL' to have a new structured allocated.
Returns a pointer to the created structure, or `NULL' on failure.

     void memcached_free (memcached_st *ptr);

Frees the structure and memory allocated to a previously created
`memcached_st' structure.

     memcached_st *memcached_clone(memcached_st *clone, memcached_st *source);

Clones an existing `memcached' structure from the specified `source',
copying the defaults and list of servers defined in the structure.


File: manual.info,  Node: ha-memcached-interfaces-libmemcached-servers,  Next: ha-memcached-interfaces-libmemcached-set,  Prev: ha-memcached-interfaces-libmemcached-base,  Up: ha-memcached-interfaces-libmemcached

15.6.3.5 `libmemcached' Server Functions
........................................

The `libmemcached' API uses a list of servers, stored within the
`memcached_server_st' structure, to act as the list of servers used by
the rest of the functions. To use `memcached', you first create the
server list, and then apply the list of servers to a valid
`libmemcached' object.

Because the list of servers, and the list of servers within an active
`libmemcached' object can be manipulated separately, you can update and
manage server lists while an active `libmemcached' interface is running.

The functions for manipulating the list of servers within a
`memcached_st' structure are:

     memcached_return
        memcached_server_add (memcached_st *ptr,
                              char *hostname,
                              unsigned int port);

Adds a server, using the given `hostname' and `port' into the
`memcached_st' structure given in `ptr'.

     memcached_return
        memcached_server_add_unix_socket (memcached_st *ptr,
                                          char *socket);

Adds a Unix socket to the list of servers configured in the
`memcached_st' structure.

     unsigned int memcached_server_count (memcached_st *ptr);

Returns a count of the number of configured servers within the
`memcached_st' structure.

     memcached_server_st *
        memcached_server_list (memcached_st *ptr);

Returns an array of all the defined hosts within a `memcached_st'
structure.

     memcached_return
        memcached_server_push (memcached_st *ptr,
                               memcached_server_st *list);

Pushes an existing list of servers onto list of servers configured for
a current `memcached_st' structure. This adds servers to the end of the
existing list, and duplicates are not checked.

The `memcached_server_st' structure can be used to create a list of
`memcached' servers which can then be applied individually to
`memcached_st' structures.

     memcached_server_st *
        memcached_server_list_append (memcached_server_st *ptr,
                                      char *hostname,
                                      unsigned int port,
                                      memcached_return *error);

Adds a server, with `hostname' and `port', to the server list in `ptr'.
The result code is handled by the `error' argument, which should point
to an existing `memcached_return' variable. The function returns a
pointer to the returned list.

     unsigned int memcached_server_list_count (memcached_server_st *ptr);

Returns the number of the servers in the server list.

     void memcached_server_list_free (memcached_server_st *ptr);

Frees the memory associated with a server list.

     memcached_server_st *memcached_servers_parse (char *server_strings);

Parses a string containing a list of servers, where individual servers
are separated by a comma, space, or both, and where individual servers
are of the form `SERVER[:PORT]'.  The return value is a server list
structure.


File: manual.info,  Node: ha-memcached-interfaces-libmemcached-set,  Next: ha-memcached-interfaces-libmemcached-get,  Prev: ha-memcached-interfaces-libmemcached-servers,  Up: ha-memcached-interfaces-libmemcached

15.6.3.6 `libmemcached' Set Functions
.....................................

The set-related functions within `libmemcached' provide the same
functionality as the core functions supported by the `memcached'
protocol. The full definition for the different functions is the same
for all the base functions (`add', `replace', `prepend', `append'). For
example, the function definition for `memcached_set()' is:

     memcached_return
        memcached_set (memcached_st *ptr,
                       const char *key,
                       size_t key_length,
                       const char *value,
                       size_t value_length,
                       time_t expiration,
                       uint32_t flags);

The `ptr' is the `memcached_st' structure. The `key' and `key_length'
define the key name and length, and `value' and `value_length' the
corresponding value and length. You can also set the expiration and
optional flags. For more information, see *Note
ha-memcached-interfaces-libmemcached-behaviors::.

This table outlines the remainder of the set-related `libmemcached'
functions and the equivalent core functions supported by the `memcached'
protocol.

This table outlines the remainder of the set-related `libmemcached'
functions and the equivalent core functions supported by the `memcached'
protocol.

`libmemcached' Function              Equivalent Core Function
`memcached_set(memc, key,            Generic `set()' operation.
key_length, value, value_length,     
expiration, flags)'                  
`memcached_add(memc, key,            Generic `add()' function.
key_length, value, value_length,     
expiration, flags)'                  
`memcached_replace(memc, key,        Generic `replace()'.
key_length, value, value_length,     
expiration, flags)'                  
`memcached_prepend(memc, key,        Prepends the specified `value'
key_length, value, value_length,     before the current value of the
expiration, flags)'                  specified `key'.
`memcached_append(memc, key,         Appends the specified `value' after
key_length, value, value_length,     the current value of the specified
expiration, flags)'                  `key'.
`memcached_cas(memc, key,            Overwrites the data for a given key
key_length, value, value_length,     as long as the corresponding `cas'
expiration, flags, cas)'             value is still the same within the
                                     server.
`memcached_set_by_key(memc,          Similar to the generic `set()', but
master_key, master_key_length, key,  has the option of an additional
key_length, value, value_length,     master key that can be used to
expiration, flags)'                  identify an individual server.
`memcached_add_by_key(memc,          Similar to the generic `add()', but
master_key, master_key_length, key,  has the option of an additional
key_length, value, value_length,     master key that can be used to
expiration, flags)'                  identify an individual server.
`memcached_replace_by_key(memc,      Similar to the generic `replace()',
master_key, master_key_length, key,  but has the option of an additional
key_length, value, value_length,     master key that can be used to
expiration, flags)'                  identify an individual server.
`memcached_prepend_by_key(memc,      Similar to the
master_key, master_key_length, key,  `memcached_prepend()', but has the
key_length, value, value_length,     option of an additional master key
expiration, flags)'                  that can be used to identify an
                                     individual server.
`memcached_append_by_key(memc,       Similar to the
master_key, master_key_length, key,  `memcached_append()', but has the
key_length, value, value_length,     option of an additional master key
expiration, flags)'                  that can be used to identify an
                                     individual server.
`memcached_cas_by_key(memc,          Similar to the `memcached_cas()',
master_key, master_key_length, key,  but has the option of an additional
key_length, value, value_length,     master key that can be used to
expiration, flags)'                  identify an individual server.

The `by_key' methods add two further arguments that define the master
key, to be used and applied during the hashing stage for selecting the
servers. You can see this in the following definition:

     memcached_return
        memcached_set_by_key(memcached_st *ptr,
                             const char *master_key,
                             size_t master_key_length,
                             const char *key,
                             size_t key_length,
                             const char *value,
                             size_t value_length,
                             time_t expiration,
                             uint32_t flags);

All the functions return a value of type `memcached_return', which you
can compare against the `MEMCACHED_SUCCESS' constant.


File: manual.info,  Node: ha-memcached-interfaces-libmemcached-get,  Next: ha-memcached-interfaces-libmemcached-behaviors,  Prev: ha-memcached-interfaces-libmemcached-set,  Up: ha-memcached-interfaces-libmemcached

15.6.3.7 `libmemcached' Get Functions
.....................................

The `libmemcached' functions provide both direct access to a single
item, and a multiple-key request mechanism that provides much faster
responses when fetching a large number of keys simultaneously.

The main get-style function, which is equivalent to the generic `get()'
is `memcached_get()'. This function returns a string pointer, pointing
to the value associated with the specified key.

     char *memcached_get (memcached_st *ptr,
                          const char *key, size_t key_length,
                          size_t *value_length,
                          uint32_t *flags,
                          memcached_return *error);

A multi-key get, `memcached_mget()', is also available. Using a
multiple key get operation is much quicker to do in one block than
retrieving the key values with individual calls to `memcached_get()'. To
start the multi-key get, call `memcached_mget()':

     memcached_return
         memcached_mget (memcached_st *ptr,
                         char **keys, size_t *key_length,
                         unsigned int number_of_keys);

The return value is the success of the operation. The `keys' parameter
should be an array of strings containing the keys, and `key_length' an
array containing the length of each corresponding key.
`number_of_keys' is the number of keys supplied in the array.

To fetch the individual values, use `memcached_fetch()' to get each
corresponding value.

     char *memcached_fetch (memcached_st *ptr,
                            const char *key, size_t *key_length,
                            size_t *value_length,
                            uint32_t *flags,
                            memcached_return *error);

The function returns the key value, with the `key', `key_length' and
`value_length' parameters being populated with the corresponding key
and length information. The function returns `NULL' when there are no
more values to be returned. A full example, including the populating of
the key data and the return of the information is provided here.

     #include <stdio.h>
     #include <sstring.h>
     #include <unistd.h>
     #include <libmemcached/memcached.h>

     int main(int argc, char *argv[])
     {
       memcached_server_st *servers = NULL;
       memcached_st *memc;
       memcached_return rc;
       char *keys[]= {"huey", "dewey", "louie"};
       size_t key_length[3];
       char *values[]= {"red", "blue", "green"};
       size_t value_length[3];
       unsigned int x;
       uint32_t flags;

       char return_key[MEMCACHED_MAX_KEY];
       size_t return_key_length;
       char *return_value;
       size_t return_value_length;

       memc= memcached_create(NULL);

       servers= memcached_server_list_append(servers, "localhost", 11211, &rc);
       rc= memcached_server_push(memc, servers);

       if (rc == MEMCACHED_SUCCESS)
         fprintf(stderr,"Added server successfully\n");
       else
         fprintf(stderr,"Couldn't add server: %s\n",memcached_strerror(memc, rc));

       for(x= 0; x < 3; x++)
         {
           key_length[x] = strlen(keys[x]);
           value_length[x] = strlen(values[x]);

           rc= memcached_set(memc, keys[x], key_length[x], values[x],
                             value_length[x], (time_t)0, (uint32_t)0);
           if (rc == MEMCACHED_SUCCESS)
             fprintf(stderr,"Key %s stored successfully\n",keys[x]);
           else
             fprintf(stderr,"Couldn't store key: %s\n",memcached_strerror(memc, rc));
         }

       rc= memcached_mget(memc, keys, key_length, 3);

       if (rc == MEMCACHED_SUCCESS)
         {
           while ((return_value= memcached_fetch(memc, return_key, &return_key_length,
                                                 &return_value_length, &flags, &rc)) != NULL)
             {
               if (rc == MEMCACHED_SUCCESS)
                 {
                   fprintf(stderr,"Key %s returned %s\n",return_key, return_value);
                 }
             }
         }

       return 0;
     }

Running the above application produces the following output:

     shell> memc_multi_fetch
     Added server successfully
     Key huey stored successfully
     Key dewey stored successfully
     Key louie stored successfully
     Key huey returned red
     Key dewey returned blue
     Key louie returned green


File: manual.info,  Node: ha-memcached-interfaces-libmemcached-behaviors,  Next: ha-memcached-interfaces-libmemcached-utilities,  Prev: ha-memcached-interfaces-libmemcached-get,  Up: ha-memcached-interfaces-libmemcached

15.6.3.8 Controlling `libmemcached' Behaviors
.............................................

The behavior of `libmemcached' can be modified by setting one or more
behavior flags. These can either be set globally, or they can be
applied during the call to individual functions. Some behaviors also
accept an additional setting, such as the hashing mechanism used when
selecting servers.

To set global behaviors:

     memcached_return
        memcached_behavior_set (memcached_st *ptr,
                                memcached_behavior flag,
                                uint64_t data);

To get the current behavior setting:

     uint64_t
        memcached_behavior_get (memcached_st *ptr,
                                memcached_behavior flag);

The following table describes `libmemcached' behavior flags.

This table lists `libmemcached' behavior flags and provides a
description of each.

Behavior                      Description
`MEMCACHED_BEHAVIOR_NO_BLOCK' Caused `libmemcached' to use asynchronous
                              I/O.
`MEMCACHED_BEHAVIOR_TCP_NODELAY'Turns on no-delay for network sockets.
`MEMCACHED_BEHAVIOR_HASH'     Without a value, sets the default hashing
                              algorithm for keys to use MD5.  Other
                              valid values include
                              `MEMCACHED_HASH_DEFAULT',
                              `MEMCACHED_HASH_MD5', `MEMCACHED_HASH_CRC',
                              `MEMCACHED_HASH_FNV1_64',
                              `MEMCACHED_HASH_FNV1A_64',
                              `MEMCACHED_HASH_FNV1_32', and
                              `MEMCACHED_HASH_FNV1A_32'.
`MEMCACHED_BEHAVIOR_DISTRIBUTION'Changes the method of selecting the server
                              used to store a given value.  The default
                              method is `MEMCACHED_DISTRIBUTION_MODULA'.
                              You can enable consistent hashing by
                              setting
                              `MEMCACHED_DISTRIBUTION_CONSISTENT'.
                              `MEMCACHED_DISTRIBUTION_CONSISTENT' is an
                              alias for the value
                              `MEMCACHED_DISTRIBUTION_CONSISTENT_KETAMA'.
`MEMCACHED_BEHAVIOR_CACHE_LOOKUPS'Cache the lookups made to the DNS service.
                              This can improve the performance if you
                              are using names instead of IP addresses
                              for individual hosts.
`MEMCACHED_BEHAVIOR_SUPPORT_CAS'Support CAS operations. By default, this
                              is disabled because it imposes a
                              performance penalty.
`MEMCACHED_BEHAVIOR_KETAMA'   Sets the default distribution to
                              `MEMCACHED_DISTRIBUTION_CONSISTENT_KETAMA'
                              and the hash to `MEMCACHED_HASH_MD5'.
`MEMCACHED_BEHAVIOR_POLL_TIMEOUT'Modify the timeout value used by `poll()'.
                              Supply a `signed int' pointer for the
                              timeout value.
`MEMCACHED_BEHAVIOR_BUFFER_REQUESTS'Buffers IO requests instead of them being
                              sent. A get operation, or closing the
                              connection causes the data to be flushed.
`MEMCACHED_BEHAVIOR_VERIFY_KEY'Forces `libmemcached' to verify that a
                              specified key is valid.
`MEMCACHED_BEHAVIOR_SORT_HOSTS'If set, hosts added to the list of
                              configured hosts for a `memcached_st'
                              structure are placed into the host list in
                              sorted order. This breaks consistent
                              hashing if that behavior has been enabled.
`MEMCACHED_BEHAVIOR_CONNECT_TIMEOUT'In nonblocking mode this changes the value
                              of the timeout during socket connection.


File: manual.info,  Node: ha-memcached-interfaces-libmemcached-utilities,  Prev: ha-memcached-interfaces-libmemcached-behaviors,  Up: ha-memcached-interfaces-libmemcached

15.6.3.9 `libmemcached' Command-Line Utilities
..............................................

In addition to the main C library interface, `libmemcached' also
includes a number of command-line utilities that can be useful when
working with and debugging `memcached' applications.

All of the command-line tools accept a number of arguments, the most
critical of which is `servers', which specifies the list of servers to
connect to when returning information.

The main tools are:

   * `memcat': Display the value for each ID given on the command line:

          shell> memcat --servers=localhost hwkey
          Hello world

   * `memcp': Copy the contents of a file into the cache, using the
     file name as the key:

          shell> echo "Hello World" > hwkey
          shell> memcp --servers=localhost hwkey
          shell> memcat --servers=localhost hwkey
          Hello world

   * `memrm': Remove an item from the cache:

          shell> memcat --servers=localhost hwkey
          Hello world
          shell> memrm --servers=localhost hwkey
          shell> memcat --servers=localhost hwkey

   * `memslap': Test the load on one or more `memcached' servers,
     simulating get/set and multiple client operations. For example,
     you can simulate the load of 100 clients performing get operations:

          shell> memslap --servers=localhost --concurrency=100 --flush --test=get
          memslap --servers=localhost --concurrency=100 --flush --test=get	Threads connecting to servers 100
          	Took 13.571 seconds to read data

   * `memflush': Flush (empty) the contents of the `memcached' cache.

          shell> memflush --servers=localhost


File: manual.info,  Node: ha-memcached-interfaces-perl,  Next: ha-memcached-interfaces-python,  Prev: ha-memcached-interfaces-libmemcached,  Up: ha-memcached-interfaces

15.6.3.10 Using MySQL and `memcached' with Perl
...............................................

The `Cache::Memcached' module provides a native interface to the
Memcache protocol, and provides support for the core functions offered
by `memcached'. Install the module using your operating system's
package management system, or using `CPAN':

     root-shell> perl -MCPAN -e 'install Cache::Memcached'

To use `memcached' from Perl through the `Cache::Memcached' module,
first create a new `Cache::Memcached' object that defines the list of
servers and other parameters for the connection. The only argument is a
hash containing the options for the cache interface. For example, to
create a new instance that uses three `memcached' servers:

     use Cache::Memcached;

     my $cache = new Cache::Memcached {
         'servers' => [
             '192.168.0.100:11211',
             '192.168.0.101:11211',
             '192.168.0.102:11211',
     	],
     };

*Note*:

When using the `Cache::Memcached' interface with multiple servers, the
API automatically performs certain operations across all the servers in
the group. For example, getting statistical information through
`Cache::Memcached' returns a hash that contains data on a host-by-host
basis, as well as generalized statistics for all the servers in the
group.

You can set additional properties on the cache object instance when it
is created by specifying the option as part of the option hash.
Alternatively, you can use a corresponding method on the instance:

   * `servers' or method `set_servers()': Specifies the list of the
     servers to be used. The servers list should be a reference to an
     array of servers, with each element as the address and port number
     combination (separated by a colon). You can also specify a local
     connection through a Unix socket (for example
     `/tmp/sock/memcached'). To specify the server with a weight
     (indicating how much more frequently the server should be used
     during hashing), specify an array reference with the `memcached'
     server instance and a weight number. Higher numbers give higher
     priority.

   * `compress_threshold' or method `set_compress_threshold()':
     Specifies the threshold when values are compressed. Values larger
     than the specified number are automatically compressed (using
     `zlib') during storage and retrieval.

   * `no_rehash' or method `set_norehash()': Disables finding a new
     server if the original choice is unavailable.

   * `readonly' or method `set_readonly()': Disables writes to the
     `memcached' servers.

Once the `Cache::Memcached' object instance has been configured, you
can use the `set()' and `get()' methods to store and retrieve
information from the `memcached' servers.  Objects stored in the cache
are automatically serialized and deserialized using the `Storable'
module.

The `Cache::Memcached' interface supports the following methods for
storing/retrieving data, and relate to the generic methods as shown in
the table.

This table lists `memcached' functions used with Perl and the
equivalent generic methods in the `memcached' interface specification.

`Cache::Memcached' Function          Equivalent Generic Method
`get()'                              Generic `get()'.
`get_multi(keys)'                    Gets multiple `keys' from memcache
                                     using just one query. Returns a
                                     hash reference of key/value pairs.
`set()'                              Generic `set()'.
`add()'                              Generic `add()'.
`replace()'                          Generic `replace()'.
`delete()'                           Generic `delete()'.
`incr()'                             Generic `incr()'.
`decr()'                             Generic `decr()'.

Below is a complete example for using `memcached' with Perl and the
`Cache::Memcached' module:

     #!/usr/bin/perl

     use Cache::Memcached;
     use DBI;
     use Data::Dumper;

     # Configure the memcached server

     my $cache = new Cache::Memcached {
         'servers' => [
                        'localhost:11211',
                        ],
         };

     # Get the film name from the command line
     # memcached keys must not contain spaces, so create
     # a key name by replacing spaces with underscores

     my $filmname = shift or die "Must specify the film name\n";
     my $filmkey = $filmname;
     $filmkey =~ s/ /_/;

     # Load the data from the cache

     my $filmdata = $cache->get($filmkey);

     # If the data wasn't in the cache, then we load it from the database

     if (!defined($filmdata))
     {
         $filmdata = load_filmdata($filmname);

         if (defined($filmdata))
         {

     # Set the data into the cache, using the key

     	if ($cache->set($filmkey,$filmdata))
             {
                 print STDERR "Film data loaded from database and cached\n";
             }
             else
             {
                 print STDERR "Couldn't store to cache\n";
     	}
         }
         else
         {
          	die "Couldn't find $filmname\n";
         }
     }
     else
     {
         print STDERR "Film data loaded from Memcached\n";
     }

     sub load_filmdata
     {
         my ($filmname) = @_;

         my $dsn = "DBI:mysql:database=sakila;host=localhost;port=3306";

         $dbh = DBI->connect($dsn, 'sakila','password');

         my ($filmbase) = $dbh->selectrow_hashref(sprintf('select * from film where title = %s',
                                                          $dbh->quote($filmname)));

         if (!defined($filmname))
         {
          	return (undef);
         }

         $filmbase->{stars} =
     	$dbh->selectall_arrayref(sprintf('select concat(first_name," ",last_name) ' .
                                              'from film_actor left join (actor) ' .
                                              'on (film_actor.actor_id = actor.actor_id) ' .
                                              ' where film_id=%s',
                                              $dbh->quote($filmbase->{film_id})));

         return($filmbase);
     }

The example uses the Sakila database, obtaining film data from the
database and writing a composite record of the film and actors to
`memcached'. When calling it for a film does not exist, you get this
result:

     shell> memcached-sakila.pl "ROCK INSTINCT"
     Film data loaded from database and cached

When accessing a film that has already been added to the cache:

     shell> memcached-sakila.pl "ROCK INSTINCT"
     Film data loaded from Memcached


File: manual.info,  Node: ha-memcached-interfaces-python,  Next: ha-memcached-interfaces-php,  Prev: ha-memcached-interfaces-perl,  Up: ha-memcached-interfaces

15.6.3.11 Using MySQL and `memcached' with Python
.................................................

The Python `memcache' module interfaces to `memcached' servers, and is
written in pure Python (that is, without using one of the C APIs). You
can download and install a copy from Python Memcached
(http://www.tummy.com/Community/software/python-memcached/).

To install, download the package and then run the Python installer:

     python setup.py install
     running install
     running bdist_egg
     running egg_info
     creating python_memcached.egg-info
     ...
     removing 'build/bdist.linux-x86_64/egg' (and everything under it)
     Processing python_memcached-1.43-py2.4.egg
     creating /usr/lib64/python2.4/site-packages/python_memcached-1.43-py2.4.egg
     Extracting python_memcached-1.43-py2.4.egg to /usr/lib64/python2.4/site-packages
     Adding python-memcached 1.43 to easy-install.pth file

     Installed /usr/lib64/python2.4/site-packages/python_memcached-1.43-py2.4.egg
     Processing dependencies for python-memcached==1.43
     Finished processing dependencies for python-memcached==1.43

Once installed, the `memcache' module provides a class-based interface
to your `memcached' servers. When you store Python data structures as
`memcached' items, they are automatically serialized (turned into
string values) using the Python `cPickle' or `pickle' modules.

To create a new `memcache' interface, import the `memcache' module and
create a new instance of the `memcache.Client' class. For example, if
the `memcached' daemon is running on localhost using the default port:

     import memcache
     memc = memcache.Client(['127.0.0.1:11211'])

The first argument is an array of strings containing the server and
port number for each `memcached' instance to use. To enable debugging,
set the optional `debug' parameter to 1.

By default, the hashing mechanism used to divide the items among
multiple servers is `crc32'. To change the function used, set the value
of `memcache.serverHashFunction' to the alternate function to use. For
example:

     from zlib import adler32
     memcache.serverHashFunction = adler32

Once you have defined the servers to use within the `memcache'
instance, the core functions provide the same functionality as in the
generic interface specification. The following table provides a summary
of the supported functions:

This table lists Python `memcached' functions and the equivalent
generic functions in the `memcached' interface specification.

Python `memcache' Function           Equivalent Generic Function
`get()'                              Generic `get()'.
`get_multi(keys)'                    Gets multiple values from the
                                     supplied array of `keys'.  Returns
                                     a hash reference of key/value pairs.
`set()'                              Generic `set()'.
`set_multi(dict [, expiry [,         Sets multiple key/value pairs from
key_prefix]])'                       the supplied `dict'.
`add()'                              Generic `add()'.
`replace()'                          Generic `replace()'.
`prepend(key, value [, expiry])'     Prepends the supplied `value' to
                                     the value of the existing `key'.
`append(key, value [, expiry[)'      Appends the supplied `value' to the
                                     value of the existing `key'.
`delete()'                           Generic `delete()'.
`delete_multi(keys [, expiry [,      Deletes all the keys from the hash
key_prefix]] )'                      matching each string in the array
                                     `keys'.
`incr()'                             Generic `incr()'.
`decr()'                             Generic `decr()'.

*Note*:

Within the Python `memcache' module, all the `*_multi()'functions
support an optional `key_prefix' parameter. If supplied, then the
string is used as a prefix to all key lookups. For example, if you call:

     memc.get_multi(['a','b'], key_prefix='users:')

The function retrieves the keys `users:a' and `users:b' from the
servers.

Here is an example showing the storage and retrieval of information to
a `memcache' instance, loading the raw data from MySQL:

     import sys
     import MySQLdb
     import memcache

     memc = memcache.Client(['127.0.0.1:11211'], debug=1);

     try:
         conn = MySQLdb.connect (host = "localhost",
                                 user = "sakila",
                                 passwd = "password",
                                 db = "sakila")
     except MySQLdb.Error, e:
          print "Error %d: %s" % (e.args[0], e.args[1])
          sys.exit (1)

     popularfilms = memc.get('top5films')

     if not popularfilms:
         cursor = conn.cursor()
         cursor.execute('select film_id,title from film order by rental_rate desc limit 5')
         rows = cursor.fetchall()
         memc.set('top5films',rows,60)
         print "Updated memcached with MySQL data"
     else:
         print "Loaded data from memcached"
         for row in popularfilms:
             print "%s, %s" % (row[0], row[1])

When executed for the first time, the data is loaded from the MySQL
database and stored to the `memcached' server.

     shell> python memc_python.py
     Updated memcached with MySQL data

Because the data is automatically serialized using `cPickle'/`pickle',
when you load the data back from `memcached', you can use the object
directly. In the example above, the information stored to `memcached'
is in the form of rows from a Python DB cursor. When accessing the
information (within the 60 second expiry time), the data is loaded from
`memcached' and dumped:

     shell> python memc_python.py
     Loaded data from memcached
     2, ACE GOLDFINGER
     7, AIRPLANE SIERRA
     8, AIRPORT POLLOCK
     10, ALADDIN CALENDAR
     13, ALI FOREVER

The serialization and deserialization happens automatically.  Because
serialization of Python data may be incompatible with other interfaces
and languages, you can change the serialization module used during
initialization. For example, you might use JSON format when you store
complex data structures using a script written in one language, and
access them in a script written in a different language.


File: manual.info,  Node: ha-memcached-interfaces-php,  Next: ha-memcached-interfaces-ruby,  Prev: ha-memcached-interfaces-python,  Up: ha-memcached-interfaces

15.6.3.12 Using MySQL and `memcached' with PHP
..............................................

PHP provides support for the Memcache functions through a PECL
extension. To enable the PHP `memcache' extensions, build PHP using the
`--enable-memcache' option to `configure' when building from source.

If you are installing on a Red Hat-based server, you can install the
`php-pecl-memcache' RPM:

     root-shell> yum --install php-pecl-memcache

On Debian-based distributions, use the `php-memcache' package.

To set global runtime configuration options, specify the configuration
option values within your `php.ini' file. The following table provides
the name, default value, and a description for each global runtime
configuration option.

This table lists global runtime configuration options for the PECL
`Memcache' extension. The table provides configuration option names,
default values, and descriptions.

Configuration option      Default        Description
`memcache.allow_failover' 1              Specifies whether another
                                         server in the list should be
                                         queried if the first server
                                         selected fails.
`memcache.max_failover_attempts'20             Specifies the number of servers
                                         to try before returning a
                                         failure.
`memcache.chunk_size'     8192           Defines the size of network
                                         chunks used to exchange data
                                         with the `memcached' server.
`memcache.default_port'   11211          Defines the default port to use
                                         when communicating with the
                                         `memcached' servers.
`memcache.hash_strategy'  standard       Specifies which hash strategy
                                         to use. Set to `consistent' to
                                         enable servers to be added or
                                         removed from the pool without
                                         causing the keys to be remapped
                                         to other servers. When set to
                                         `standard', an older (modula)
                                         strategy is used that
                                         potentially uses different
                                         servers for storage.
`memcache.hash_function'  crc32          Specifies which function to use
                                         when mapping keys to servers.
                                         `crc32' uses the standard CRC32
                                         hash.  `fnv' uses the FNV-1a
                                         hashing algorithm.

To create a connection to a `memcached' server, create a new `Memcache'
object and then specify the connection options. For example:

     <?php

     $cache = new Memcache;
     $cache->connect('localhost',11211);
     ?>

This opens an immediate connection to the specified server.

To use multiple `memcached' servers, you need to add servers to the
memcache object using `addServer()':

     bool Memcache::addServer ( string $host [, int $port [, bool $persistent
                      [, int $weight [, int $timeout [, int $retry_interval
                      [, bool $status [, callback $failure_callback
                      ]]]]]]] )

The server management mechanism within the `php-memcache' module is a
critical part of the interface as it controls the main interface to the
`memcached' instances and how the different instances are selected
through the hashing mechanism.

To create a simple connection to two `memcached' instances:

     <?php

     $cache = new Memcache;
     $cache->addServer('192.168.0.100',11211);
     $cache->addServer('192.168.0.101',11211);
     ?>

In this scenario, the instance connection is not explicitly opened, but
only opened when you try to store or retrieve a value. To enable
persistent connections to `memcached' instances, set the `$persistent'
argument to true. This is the default setting, and causes the
connections to remain open.

To help control the distribution of keys to different instances, use
the global `memcache.hash_strategy' setting. This sets the hashing
mechanism used to select. You can also add another weight to each
server, which effectively increases the number of times the instance
entry appears in the instance list, therefore increasing the likelihood
of the instance being chosen over other instances. To set the weight,
set the value of the `$weight' argument to more than one.

The functions for setting and retrieving information are identical to
the generic functional interface offered by `memcached', as shown in
this table:

This table lists PECL `memcached' functions and the equivalent generic
functions in the `memcached' interface specification.

PECL `memcache' Function             Generic Function
`get()'                              Generic `get()'.
`set()'                              Generic `set()'.
`add()'                              Generic `add()'.
`replace()'                          Generic `replace()'.
`delete()'                           Generic `delete()'.
`increment()'                        Generic `incr()'.
`decrement()'                        Generic `decr()'.

A full example of the PECL `memcache' interface is provided below. The
code loads film data from the Sakila database when the user provides a
film name. The data stored into the `memcached' instance is recorded as
a `mysqli' result row, and the API automatically serializes the
information for you.


     <?php

     $memc = new Memcache;
     $memc->addServer('localhost','11211');

     if(empty($_POST['film'])) {
     ?>
       <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
         <head>
           <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
           <title>Simple Memcache Lookup</title>
         </head>
         <body>
           <form method="post">
             <p><b>Film</b>: <input type="text" size="20" name="film"></p>
             <input type="submit">
           </form>
           <hr/>
     <?php

     } else {

         echo "Loading data...\n";

         $film   = htmlspecialchars($_POST['film'], ENT_QUOTES, 'UTF-8');
         $mfilms = $memc->get($film);

         if ($mfilms) {

             printf("<p>Film data for %s loaded from memcache</p>", $mfilms['title']);

             foreach (array_keys($mfilms) as $key) {
                 printf("<p><b>%s</b>: %s</p>", $key, $mfilms[$key]);
             }

         } else {

             $mysqli = mysqli('localhost','sakila','password','sakila');

             if (mysqli_connect_error()) {
                 sprintf("Database error: (%d) %s", mysqli_connect_errno(), mysqli_connect_error());
                 exit;
             }

             $sql = sprintf('SELECT * FROM film WHERE title="%s"', $mysqli->real_escape_string($film));

             $result = $mysqli->query($sql);

             if (!$result) {
                 sprintf("Database error: (%d) %s", $mysqli->errno, $mysqli->error);
                 exit;
             }

             $row = $result->fetch_assoc();

             $memc->set($row['title'], $row);

             printf("<p>Loaded (%s) from MySQL</p>", htmlspecialchars($row['title'], ENT_QUOTES, 'UTF-8');
         }
     }
     ?>
       </body>
     </html>

With PHP, the connections to the `memcached' instances are kept open as
long as the PHP and associated Apache instance remain running. When
adding or removing servers from the list in a running instance (for
example, when starting another script that mentions additional
servers), the connections are shared, but the script only selects among
the instances explicitly configured within the script.

To ensure that changes to the server list within a script do not cause
problems, make sure to use the consistent hashing mechanism.


File: manual.info,  Node: ha-memcached-interfaces-ruby,  Next: ha-memcached-interfaces-java,  Prev: ha-memcached-interfaces-php,  Up: ha-memcached-interfaces

15.6.3.13 Using MySQL and `memcached' with Ruby
...............................................

There are a number of different modules for interfacing to `memcached'
within Ruby. The `Ruby-MemCache' client library provides a native
interface to `memcached' that does not require any external libraries,
such as `libmemcached'. You can obtain the installer package from
`http://www.deveiate.org/projects/RMemCache'.

To install, extract the package and then run `install.rb':

     shell> install.rb

If you have RubyGems, you can install the `Ruby-MemCache' gem:

     shell> gem install Ruby-MemCache
     Bulk updating Gem source index for: http://gems.rubyforge.org
     Install required dependency io-reactor? [Yn]  y
     Successfully installed Ruby-MemCache-0.0.1
     Successfully installed io-reactor-0.05
     Installing ri documentation for io-reactor-0.05...
     Installing RDoc documentation for io-reactor-0.05...

To use a `memcached' instance from within Ruby, create a new instance
of the `MemCache' object.

     require 'memcache'
     memc = MemCache::new '192.168.0.100:11211'

You can add a weight to each server to increase the likelihood of the
server being selected during hashing by appending the weight count to
the server host name/port string:

     require 'memcache'
     memc = MemCache::new '192.168.0.100:11211:3'

To add servers to an existing list, you can append them directly to the
`MemCache' object:

     memc += ["192.168.0.101:11211"]

To set data into the cache, you can just assign a value to a key within
the new cache object, which works just like a standard Ruby hash object:

     memc["key"] = "value"

Or to retrieve the value:

     print memc["key"]

For more explicit actions, you can use the method interface, which
mimics the main `memcached' API functions, as summarized in the
following table:

This table lists `memcached' methods for Ruby and the equivalent
`memcached' API functions.

Ruby `MemCache' Method               Equivalent `memcached' API Functions
`get()'                              Generic `get()'.
`get_hash(keys)'                     Get the values of multiple `keys',
                                     returning the information as a hash
                                     of the keys and their values.
`set()'                              Generic `set()'.
`set_many(pairs)'                    Set the values of the keys and
                                     values in the hash `pairs'.
`add()'                              Generic `add()'.
`replace()'                          Generic `replace()'.
`delete()'                           Generic `delete()'.
`incr()'                             Generic `incr()'.
`decr()'                             Generic `decr()'.


File: manual.info,  Node: ha-memcached-interfaces-java,  Next: ha-memcached-interfaces-protocol,  Prev: ha-memcached-interfaces-ruby,  Up: ha-memcached-interfaces

15.6.3.14 Using MySQL and `memcached' with Java
...............................................

The `com.danga.MemCached' class within Java provides a native interface
to `memcached' instances. You can obtain the client from
`https://github.com/gwhalin/Memcached-Java-Client/downloads'.  The Java
class uses hashes that are compatible with `libmemcached', so you can
mix and match Java and `libmemcached' applications accessing the same
`memcached' instances. The serialization between Java and other
interfaces are not compatible. If this is a problem, use JSON or a
similar nonbinary serialization format.

On most systems, you can download the package and use the `jar'
directly.

To use the `com.danga.MemCached' interface, you create a
`MemCachedClient' instance and then configure the list of servers by
configuring the `SockIOPool'. Through the pool specification you set up
the server list, weighting, and the connection parameters to optimized
the connections between your client and the `memcached' instances that
you configure.

Generally, you can configure the `memcached' interface once within a
single class, then use this interface throughout the rest of your
application.

For example, to create a basic interface, first configure the
`MemCachedClient' and base `SockIOPool' settings:

     public class MyClass {

         protected static MemCachedClient mcc = new MemCachedClient();

         static {

             String[] servers =
                 {
                     "localhost:11211",
                 };

             Integer[] weights = { 1 };

             SockIOPool pool = SockIOPool.getInstance();

             pool.setServers( servers );
             pool.setWeights( weights );

In the above sample, the list of servers is configured by creating an
array of the `memcached' instances to use. You can then configure
individual weights for each server.

The remainder of the properties for the connection are optional, but
you can set the connection numbers (initial connections, minimum
connections, maximum connections, and the idle timeout) by setting the
pool parameters:

     pool.setInitConn( 5 );
     pool.setMinConn( 5 );
     pool.setMaxConn( 250 );
     pool.setMaxIdle( 1000 * 60 * 60 * 6

Once the parameters have been configured, initialize the connection
pool:

     pool.initialize();

The pool, and the connection to your `memcached' instances should now
be ready to use.

To set the hashing algorithm used to select the server used when
storing a given key, use `pool.setHashingAlg()':

     pool.setHashingAlg( SockIOPool.NEW_COMPAT_HASH );

Valid values are `NEW_COMPAT_HASH', `OLD_COMPAT_HASH' and `NATIVE_HASH'
are also basic modula hashing algorithms. For a consistent hashing
algorithm, use `CONSISTENT_HASH'. These constants are equivalent to the
corresponding hash settings within `libmemcached'.

The following table outlines the Java `com.danga.MemCached' methods and
the equivalent generic methods in the `memcached' interface
specification.

This table lists Java `com.danga.MemCached' methods and the equivalent
generic methods in the `memcached' interface specification.

Java `com.danga.MemCached' Method    Equivalent Generic Method
`get()'                              Generic `get()'.
`getMulti(keys)'                     Get the values of multiple `keys',
                                     returning the information as Hash
                                     map using `java.lang.String' for
                                     the keys and `java.lang.Object' for
                                     the corresponding values.
`set()'                              Generic `set()'.
`add()'                              Generic `add()'.
`replace()'                          Generic `replace()'.
`delete()'                           Generic `delete()'.
`incr()'                             Generic `incr()'.
`decr()'                             Generic `decr()'.


File: manual.info,  Node: ha-memcached-interfaces-protocol,  Prev: ha-memcached-interfaces-java,  Up: ha-memcached-interfaces

15.6.3.15 Using the `memcached' TCP Text Protocol
.................................................

Communicating with a `memcached' server can be achieved through either
the TCP or UDP protocols. When using the TCP protocol, you can use a
simple text based interface for the exchange of information.

When communicating with `memcached', you can connect to the server
using the port configured for the server.  You can open a connection
with the server without requiring authorization or login. As soon as
you have connected, you can start to send commands to the server. When
you have finished, you can terminate the connection without sending any
specific disconnection command. Clients are encouraged to keep their
connections open to decrease latency and improve performance.

Data is sent to the `memcached' server in two forms:

   * Text lines, which are used to send commands to the server, and
     receive responses from the server.

   * Unstructured data, which is used to receive or send the value
     information for a given key. Data is returned to the client in
     exactly the format it was provided.

Both text lines (commands and responses) and unstructured data are
always terminated with the string `\r\n'.  Because the data being
stored may contain this sequence, the length of the data (returned by
the client before the unstructured data is transmitted should be used
to determine the end of the data.

Commands to the server are structured according to their operation:

   * *Storage commands*: `set', `add', `replace', `append', `prepend',
     `cas'

     Storage commands to the server take the form:

          command key [flags] [exptime] length [noreply]

     Or when using compare and swap (cas):

          cas key [flags] [exptime] length [casunique] [noreply]

     Where:

        * `command': The command name.

             * `set': Store value against key

             * `add': Store this value against key if the key does not
               already exist

             * `replace': Store this value against key if the key
               already exists

             * `append': Append the supplied value to the end of the
               value for the specified key. The `flags' and `exptime'
               arguments should not be used.

             * `prepend': Append value currently in the cache to the
               end of the supplied value for the specified key. The
               `flags' and `exptime' arguments should not be used.

             * `cas': Set the specified key to the supplied value, only
               if the supplied `casunique' matches. This is effectively
               the equivalent of change the information if nobody has
               updated it since I last fetched it.

        * `key': The key. All data is stored using a the specific key.
          The key cannot contain control characters or whitespace, and
          can be up to 250 characters in size.

        * `flags': The flags for the operation (as an integer). Flags
          in `memcached' are transparent. The `memcached' server
          ignores the contents of the flags. They can be used by the
          client to indicate any type of information. In `memcached'
          1.2.0 and lower the value is a 16-bit integer value. In
          `memcached' 1.2.1 and higher the value is a 32-bit integer.

        * `exptime': The expiry time, or zero for no expiry.

        * `length': The length of the supplied value block in bytes,
          excluding the terminating `\r\n' characters.

        * `casunique': A unique 64-bit value of an existing entry. This
          is used to compare against the existing value. Use the value
          returned by the `gets' command when issuing `cas' updates.

        * `noreply': Tells the server not to reply to the command.

     For example, to store the value `abcdef' into the key `xyzkey',
     you would use:

          set xyzkey 0 0 6\r\nabcdef\r\n

     The return value from the server is one line, specifying the
     status or error information. For more information, see *Note
     ha-memcached-interfaces-protocol-responses::.

   * *Retrieval commands*: `get', `gets'

     Retrieval commands take the form:

          get key1 [key2 .... keyn]
          gets key1 [key2 ... keyn]

     You can supply multiple keys to the commands, with each requested
     key separated by whitespace.

     The server responds with an information line of the form:

          VALUE key flags bytes [casunique]

     Where:

        * `key': The key name.

        * `flags': The value of the flag integer supplied to the
          `memcached' server when the value was stored.

        * `bytes': The size (excluding the terminating `\r\n' character
          sequence) of the stored value.

        * `casunique': The unique 64-bit integer that identifies the
          item.

     The information line is immediately followed by the value data
     block. For example:

          get xyzkey\r\n
          VALUE xyzkey 0 6\r\n
          abcdef\r\n

     If you have requested multiple keys, an information line and data
     block is returned for each key found. If a requested key does not
     exist in the cache, no information is returned.

   * *Delete commands*: `delete'

     Deletion commands take the form:

          delete key [time] [noreply]

     Where:

        * `key': The key name.

        * `time': The time in seconds (or a specific Unix time) for
          which the client wishes the server to refuse `add' or
          `replace' commands on this key. All `add', `replace', `get',
          and `gets' commands fail during this period. `set' operations
          succeed. After this period, the key is deleted permanently
          and all commands are accepted.

          If not supplied, the value is assumed to be zero (delete
          immediately).

        * `noreply': Tells the server not to reply to the command.

     Responses to the command are either `DELETED' to indicate that the
     key was successfully removed, or `NOT_FOUND' to indicate that the
     specified key could not be found.

   * *Increment/Decrement*: `incr', `decr'

     The increment and decrement commands change the value of a key
     within the server without performing a separate get/set sequence.
     The operations assume that the currently stored value is a 64-bit
     integer. If the stored value is not a 64-bit integer, then the
     value is assumed to be zero before the increment or decrement
     operation is applied.

     Increment and decrement commands take the form:

          incr key value [noreply]
          decr key value [noreply]

     Where:

        * `key': The key name.

        * `value': An integer to be used as the increment or decrement
          value.

        * `noreply': Tells the server not to reply to the command.

     The response is:

        * `NOT_FOUND': The specified key could not be located.

        * `value': The new value associated with the specified key.

     Values are assumed to be unsigned. For `decr' operations, the
     value is never decremented below 0. For `incr' operations, the
     value wraps around the 64-bit maximum.

   * *Statistics commands*: `stats'

     The `stats' command provides detailed statistical information
     about the current status of the `memcached' instance and the data
     it is storing.

     Statistics commands take the form:

          STAT [name] [value]

     Where:

        * `name': The optional name of the statistics to return. If not
          specified, the general statistics are returned.

        * `value': A specific value to be used when performing certain
          statistics operations.

     The return value is a list of statistics data, formatted as
     follows:

          STAT name value

     The statistics are terminated with a single line, `END'.

     For more information, see *Note ha-memcached-stats::.

For reference, a list of the different commands supported and their
formats is provided below.

*`memcached' Command Reference*

Command            Command Formats
`set'              `set key flags exptime length', `set key flags
                   exptime length noreply'
`add'              `add key flags exptime length', `add key flags
                   exptime length noreply'
`replace'          `replace key flags exptime length', `replace key
                   flags exptime length noreply'
`append'           `append key length', `append key length noreply'
`prepend'          `prepend key length', `prepend key length noreply'
`cas'              `cas key flags exptime length casunique', `cas key
                   flags exptime length casunique noreply'
`get'              `get key1 [key2 ... keyn]'
`gets'             `'
`delete'           `delete key', `delete key noreply', `delete key
                   expiry', `delete key expiry noreply'
`incr'             `incr key', `incr key noreply', `incr key value',
                   `incr key value noreply'
`decr'             `decr key', `decr key noreply', `decr key value',
                   `decr key value noreply'
`stat'             `stat', `stat name', `stat name value'

When sending a command to the server, the response from the server is
one of the settings in the following table. All response values from
the server are terminated by `\r\n':

*`memcached' Protocol Responses*

String             Description
`STORED'           Value has successfully been stored.
`NOT_STORED'       The value was not stored, but not because of an
                   error. For commands where you are adding a or
                   updating a value if it exists (such as `add' and
                   `replace'), or where the item has already been set to
                   be deleted.
`EXISTS'           When using a `cas' command, the item you are trying to
                   store already exists and has been modified since you
                   last checked it.
`NOT_FOUND'        The item you are trying to store, update or delete
                   does not exist or has already been deleted.
`ERROR'            You submitted a nonexistent command name.
`CLIENT_ERROR      There was an error in the input line, the detail is
errorstring'       contained in `errorstring'.
`SERVER_ERROR      There was an error in the server that prevents it
errorstring'       from returning the information. In extreme
                   conditions, the server may disconnect the client
                   after this error occurs.
`VALUE keys flags  The requested key has been found, and the stored
length'            `key', `flags' and data block are returned, of the
                   specified `length'.
`DELETED'          The requested key was deleted from the server.
`STAT name value'  A line of statistics data.
`END'              The end of the statistics data.


File: manual.info,  Node: ha-memcached-stats,  Next: ha-memcached-faq,  Prev: ha-memcached-interfaces,  Up: ha-memcached

15.6.4 Getting `memcached' Statistics
-------------------------------------

* Menu:

* ha-memcached-stats-general::   `memcached' General Statistics
* ha-memcached-stats-slabs::     `memcached' Slabs Statistics
* ha-memcached-stats-items::     `memcached' Item Statistics
* ha-memcached-stats-sizes::     `memcached' Size Statistics
* ha-memcached-stats-detail::    `memcached' Detail Statistics
* ha-memcached-stats-memcached-tool::  Using `memcached-tool'

The `memcached' system has a built-in statistics system that collects
information about the data being stored into the cache, cache hit
ratios, and detailed information on the memory usage and distribution
of information through the slab allocation used to store individual
items. Statistics are provided at both a basic level that provide the
core statistics, and more specific statistics for specific areas of the
`memcached' server.

This information can be useful to ensure that you are getting the
correct level of cache and memory usage, and that your slab allocation
and configuration properties are set at an optimal level.

The stats interface is available through the standard `memcached'
protocol, so the reports can be accessed by using `telnet' to connect
to the `memcached'. The supplied `memcached-tool' includes support for
obtaining the *Note ha-memcached-stats-slabs:: and *Note
ha-memcached-stats-general:: information. For more information, see
*Note ha-memcached-stats-memcached-tool::.

Alternatively, most of the language API interfaces provide a function
for obtaining the statistics from the server.

For example, to get the basic stats using `telnet':

     shell> telnet localhost 11211
     Trying ::1...
     Connected to localhost.
     Escape character is '^]'.
     stats
     STAT pid 23599
     STAT uptime 675
     STAT time 1211439587
     STAT version 1.2.5
     STAT pointer_size 32
     STAT rusage_user 1.404992
     STAT rusage_system 4.694685
     STAT curr_items 32
     STAT total_items 56361
     STAT bytes 2642
     STAT curr_connections 53
     STAT total_connections 438
     STAT connection_structures 55
     STAT cmd_get 113482
     STAT cmd_set 80519
     STAT get_hits 78926
     STAT get_misses 34556
     STAT evictions 0
     STAT bytes_read 6379783
     STAT bytes_written 4860179
     STAT limit_maxbytes 67108864
     STAT threads 1
     END

When using Perl and the `Cache::Memcached' module, the `stats()'
function returns information about all the servers currently configured
in the connection object, and total statistics for all the `memcached'
servers as a whole.

For example, the following Perl script obtains the stats and dumps the
hash reference that is returned:

     use Cache::Memcached;
     use Data::Dumper;

     my $memc = new Cache::Memcached;
     $memc->set_servers(\@ARGV);

     print Dumper($memc->stats());

When executed on the same `memcached' as used in the `Telnet' example
above we get a hash reference with the host by host and total
statistics:

     $VAR1 = {
         'hosts' => {
                'localhost:11211' => {
                           'misc' => {
                                 'bytes' => '2421',
                                 'curr_connections' => '3',
                                 'connection_structures' => '56',
                                 'pointer_size' => '32',
                                 'time' => '1211440166',
                                 'total_items' => '410956',
                                 'cmd_set' => '588167',
                                 'bytes_written' => '35715151',
                                 'evictions' => '0',
                                 'curr_items' => '31',
                                 'pid' => '23599',
                                 'limit_maxbytes' => '67108864',
                                 'uptime' => '1254',
                                 'rusage_user' => '9.857805',
                                 'cmd_get' => '838451',
                                 'rusage_system' => '34.096988',
                                 'version' => '1.2.5',
                                 'get_hits' => '581511',
                                 'bytes_read' => '46665716',
                                 'threads' => '1',
                                 'total_connections' => '3104',
                                 'get_misses' => '256940'
                               },
                           'sizes' => {
                                  '128' => '16',
                                  '64' => '15'
                                }
                         }
              },
         'self' => {},
         'total' => {
                'cmd_get' => 838451,
                'bytes' => 2421,
                'get_hits' => 581511,
                'connection_structures' => 56,
                'bytes_read' => 46665716,
                'total_items' => 410956,
                'total_connections' => 3104,
                'cmd_set' => 588167,
                'bytes_written' => 35715151,
                'curr_items' => 31,
                'get_misses' => 256940
              }
             };

The statistics are divided up into a number of distinct sections, and
then can be requested by adding the type to the `stats' command. Each
statistics output is covered in more detail in the following sections.

   * General statistics, see *Note ha-memcached-stats-general::.

   * Slab statistics (`slabs'), see *Note ha-memcached-stats-slabs::.

   * Item statistics (`items'), see *Note ha-memcached-stats-items::.

   * Size statistics (`sizes'), see *Note ha-memcached-stats-sizes::.

   * Detailed status (`detail'), see *Note ha-memcached-stats-detail::.


File: manual.info,  Node: ha-memcached-stats-general,  Next: ha-memcached-stats-slabs,  Prev: ha-memcached-stats,  Up: ha-memcached-stats

15.6.4.1 `memcached' General Statistics
.......................................

The output of the general statistics provides an overview of the
performance and use of the `memcached' instance. The statistics
returned by the command and their meaning is shown in the following
table.

The following terms are used to define the value type for each
statistics value:

   * `32u': 32-bit unsigned integer

   * `64u': 64-bit unsigned integer

   * `32u:32u': Two 32-bit unsigned integers separated by a colon

   * `String': Character string

This table lists `memcached' general statistics and provides the data
type and a description for each statistic.

Statistic      Data type   Description                              Version
`pid'          32u         Process ID of the `memcached' instance.  
`uptime'       32u         Uptime (in seconds) for this             
                           `memcached' instance.                    
`time'         32u         Current time (as epoch).                 
`version'      string      Version string of this instance.         
`pointer_size' string      Size of pointers for this host           
                           specified in bits (32 or 64).            
`rusage_user'  32u:32u     Total user time for this instance        
                           (seconds:microseconds).                  
`rusage_system'32u:32u     Total system time for this instance      
                           (seconds:microseconds).                  
`curr_items'   32u         Current number of items stored by this   
                           instance.                                
`total_items'  32u         Total number of items stored during the  
                           life of this instance.                   
`bytes'        64u         Current number of bytes used by this     
                           server to store items.                   
`curr_connections'32u         Current number of open connections.      
`total_connections'32u         Total number of connections opened       
                           since the server started running.        
`connection_structures'32u         Number of connection structures          
                           allocated by the server.                 
`cmd_get'      64u         Total number of retrieval requests       
                           (`get' operations).                      
`cmd_set'      64u         Total number of storage requests (`set'  
                           operations).                             
`get_hits'     64u         Number of keys that have been requested  
                           and found present.                       
`get_misses'   64u         Number of items that have been           
                           requested and not found.                 
`delete_hits'  64u         Number of keys that have been deleted    1.3.x
                           and found present.                       
`delete_misses'64u         Number of items that have been delete    1.3.x
                           and not found.                           
`incr_hits'    64u         Number of keys that have been            1.3.x
                           incremented and found present.           
`incr_misses'  64u         Number of items that have been           1.3.x
                           incremented and not found.               
`decr_hits'    64u         Number of keys that have been            1.3.x
                           decremented and found present.           
`decr_misses'  64u         Number of items that have been           1.3.x
                           decremented and not found.               
`cas_hits'     64u         Number of keys that have been compared   1.3.x
                           and swapped and found present.           
`cas_misses'   64u         Number of items that have been compared  1.3.x
                           and swapped and not found.               
`cas_badvalue' 64u         Number of keys that have been compared   1.3.x
                           and swapped, but the comparison          
                           (original) value did not match the       
                           supplied value.                          
`evictions'    64u         Number of valid items removed from       
                           cache to free memory for new items.      
`bytes_read'   64u         Total number of bytes read by this       
                           server from network.                     
`bytes_written'64u         Total number of bytes sent by this       
                           server to network.                       
`limit_maxbytes'32u         Number of bytes this server is           
                           permitted to use for storage.            
`threads'      32u         Number of worker threads requested.      
`conn_yields'  64u         Number of yields for connections         1.4.0
                           (related to the `-R' option).            

The most useful statistics from those given here are the number of
cache hits, misses, and evictions.

A large number of `get_misses' may just be an indication that the cache
is still being populated with information. The number should, over
time, decrease in comparison to the number of cache `get_hits'.  If,
however, you have a large number of cache misses compared to cache hits
after an extended period of execution, it may be an indication that the
size of the cache is too small and you either need to increase the
total memory size, or increase the number of the `memcached' instances
to improve the hit ratio.

A large number of `evictions' from the cache, particularly in
comparison to the number of items stored is a sign that your cache is
too small to hold the amount of information that you regularly want to
keep cached. Instead of items being retained in the cache, items are
being evicted to make way for new items keeping the turnover of items
in the cache high, reducing the efficiency of the cache.


File: manual.info,  Node: ha-memcached-stats-slabs,  Next: ha-memcached-stats-items,  Prev: ha-memcached-stats-general,  Up: ha-memcached-stats

15.6.4.2 `memcached' Slabs Statistics
.....................................

To get the `slabs' statistics, use the `stats slabs' command, or the
API equivalent.

The slab statistics provide you with information about the slabs that
have created and allocated for storing information within the cache.
You get information both on each individual slab-class and total
statistics for the whole slab.

     STAT 1:chunk_size 104
     STAT 1:chunks_per_page 10082
     STAT 1:total_pages 1
     STAT 1:total_chunks 10082
     STAT 1:used_chunks 10081
     STAT 1:free_chunks 1
     STAT 1:free_chunks_end 10079
     STAT 9:chunk_size 696
     STAT 9:chunks_per_page 1506
     STAT 9:total_pages 63
     STAT 9:total_chunks 94878
     STAT 9:used_chunks 94878
     STAT 9:free_chunks 0
     STAT 9:free_chunks_end 0
     STAT active_slabs 2
     STAT total_malloced 67083616
     END

Individual stats for each slab class are prefixed with the slab ID. A
unique ID is given to each allocated slab from the smallest size up to
the largest. The prefix number indicates the slab class number in
relation to the calculated chunk from the specified growth factor.
Hence in the example, 1 is the first chunk size and 9 is the 9th chunk
allocated size.

The parameters returned for each chunk size and a description of each
parameter are provided in the following table.

This table lists `memcached' slabs statistics parameters that are
returned for each chunk size.  The table provides the statistic name,
description, and version (if applicable).

Statistic          Description                              Version
`chunk_size'       Space allocated to each chunk within     
                   this slab class.                         
`chunks_per_page'  Number of chunks within a single page    
                   for this slab class.                     
`total_pages'      Number of pages allocated to this slab   
                   class.                                   
`total_chunks'     Number of chunks allocated to the slab   
                   class.                                   
`used_chunks'      Number of chunks allocated to an item..  
`free_chunks'      Number of chunks not yet allocated to    
                   items.                                   
`free_chunks_end'  Number of free chunks at the end of the  
                   last allocated page.                     
`get_hits'         Number of get hits to this chunk         1.3.x
`cmd_set'          Number of set commands on this chunk     1.3.x
`delete_hits'      Number of delete hits to this chunk      1.3.x
`incr_hits'        Number of increment hits to this chunk   1.3.x
`decr_hits'        Number of decrement hits to this chunk   1.3.x
`cas_hits'         Number of CAS hits to this chunk         1.3.x
`cas_badval'       Number of CAS hits on this chunk where   1.3.x
                   the existing value did not match         
`mem_requested'    The true amount of memory of memory      1.4.1
                   requested within this chunk              

The following additional statistics cover the information for the
entire server, rather than on a chunk by chunk basis:

This table lists `memcached' slab statistics that provide information
for the the entire server rather than for a single chunk. The table
provides the statistic name, description, and version (if applicable).

Statistic          Description                              Version
`active_slabs'     Total number of slab classes allocated.  
`total_malloced'   Total amount of memory allocated to      
                   slab pages.                              

The key values in the slab statistics are the `chunk_size', and the
corresponding `total_chunks' and `used_chunks' parameters. These given
an indication of the size usage of the chunks within the system.
Remember that one key/value pair is placed into a chunk of a suitable
size.

From these stats, you can get an idea of your size and chunk allocation
and distribution. If you store many items with a number of largely
different sizes, consider adjusting the chunk size growth factor to
increase in larger steps to prevent chunk and memory wastage. A good
indication of a bad growth factor is a high number of different slab
classes, but with relatively few chunks actually in use within each
slab. Increasing the growth factor creates fewer slab classes and
therefore makes better use of the allocated pages.


File: manual.info,  Node: ha-memcached-stats-items,  Next: ha-memcached-stats-sizes,  Prev: ha-memcached-stats-slabs,  Up: ha-memcached-stats

15.6.4.3 `memcached' Item Statistics
....................................

To get the `items' statistics, use the `stats items' command, or the
API equivalent.

The `items' statistics give information about the individual items
allocated within a given slab class.

     STAT items:2:number 1
     STAT items:2:age 452
     STAT items:2:evicted 0
     STAT items:2:evicted_nonzero 0
     STAT items:2:evicted_time 2
     STAT items:2:outofmemory 0
     STAT items:2:tailrepairs 0
     ...
     STAT items:27:number 1
     STAT items:27:age 452
     STAT items:27:evicted 0
     STAT items:27:evicted_nonzero 0
     STAT items:27:evicted_time 2
     STAT items:27:outofmemory 0
     STAT items:27:tailrepairs 0

The prefix number against each statistics relates to the corresponding
chunk size, as returned by the `stats slabs' statistics. The result is
a display of the number of items stored within each chunk within each
slab size, and specific statistics about their age, eviction counts, and
out of memory counts. A summary of the statistics is given in the
following table.

This table lists `memcached' item statistics and provides a description
of each.

Statistic          Description                                     
`number'           The number of items currently stored in this    
                   slab class.                                     
`age'              The age of the oldest item within the slab      
                   class, in seconds.                              
`evicted'          The number of items evicted to make way for     
                   new entries.                                    
`evicted_time'     The time of the last evicted entry              
`evicted_nonzero'  The time of the last evicted non-zero entry     1.4.0
`outofmemory'      The number of items for this slab class that    
                   have triggered an out of memory error (only     
                   value when the `-M' command line option is in   
                   effect).                                        
`tailrepairs'      Number of times the entries for a particular    
                   ID need repairing                               

Item level statistics can be used to determine how many items are
stored within a given slab and their freshness and recycle rate. You
can use this to help identify whether there are certain slab classes
that are triggering a much larger number of evictions that others.


File: manual.info,  Node: ha-memcached-stats-sizes,  Next: ha-memcached-stats-detail,  Prev: ha-memcached-stats-items,  Up: ha-memcached-stats

15.6.4.4 `memcached' Size Statistics
....................................

To get size statistics, use the `stats sizes' command, or the API
equivalent.

The size statistics provide information about the sizes and number of
items of each size within the cache. The information is returned as two
columns, the first column is the size of the item (rounded up to the
nearest 32 byte boundary), and the second column is the count of the
number of items of that size within the cache:

     96 35
     128 38
     160 807
     192 804
     224 410
     256 222
     288 83
     320 39
     352 53
     384 33
     416 64
     448 51
     480 30
     512 54
     544 39
     576 10065

*Caution*:

Running this statistic locks up your cache as each item is read from
the cache and its size calculated. On a large cache, this may take some
time and prevent any set or get operations until the process completes.

The item size statistics are useful only to determine the sizes of the
objects you are storing. Since the actual memory allocation is relevant
only in terms of the chunk size and page size, the information is only
useful during a careful debugging or diagnostic session.


File: manual.info,  Node: ha-memcached-stats-detail,  Next: ha-memcached-stats-memcached-tool,  Prev: ha-memcached-stats-sizes,  Up: ha-memcached-stats

15.6.4.5 `memcached' Detail Statistics
......................................

For `memcached' 1.3.x and higher, you can enable and obtain detailed
statistics about the get, set, and del operations on theindividual keys
stored in the cache, and determine whether the attempts hit (found) a
particular key.  These operations are only recorded while the detailed
stats analysis is turned on.

To enable detailed statistics, you must send the `stats detail on'
command to the `memcached' server:

     $ telnet localhost 11211
     Trying 127.0.0.1...
     Connected to tiger.
     Escape character is '^]'.stats detail on
     OK

Individual statistics are recorded for every `get', `set' and `del'
operation on a key, including keys that are not currently stored in the
server. For example, if an attempt is made to obtain the value of key
`abckey' and it does not exist, the `get' operating on the specified
key are recorded while detailed statistics are in effect, even if the
key is not currently stored. The `hits', that is, the number of `get' or
`del' operations for a key that exists in the server are also counted.

To turn detailed statistics off, send the `stats detail off' command to
the `memcached' server:

     $ telnet localhost 11211
     Trying 127.0.0.1...
     Connected to tiger.
     Escape character is '^]'.stats detail on
     OK

To obtain the detailed statistics recorded during the process, send the
`stats detail dump' command to the `memcached' server:

     stats detail dump
     PREFIX hykkey get 0 hit 0 set 1 del 0
     PREFIX xyzkey get 0 hit 0 set 1 del 0
     PREFIX yukkey get 1 hit 0 set 0 del 0
     PREFIX abckey get 3 hit 3 set 1 del 0
     END

You can use the detailed statistics information to determine whether
your `memcached' clients are using a large number of keys that do not
exist in the server by comparing the `hit' and `get' or `del' counts.
Because the information is recorded by key, you can also determine
whether the failures or operations are clustered around specific keys.


File: manual.info,  Node: ha-memcached-stats-memcached-tool,  Prev: ha-memcached-stats-detail,  Up: ha-memcached-stats

15.6.4.6 Using `memcached-tool'
...............................

The `memcached-tool', located within the `scripts' directory within the
`memcached' source directory. The tool provides convenient access to
some reports and statistics from any `memcached' instance.

The basic format of the command is:

     shell> ./memcached-tool hostname:port [command]

The default output produces a list of the slab allocations and usage.
For example:

     shell> memcached-tool localhost:11211 display
       #  Item_Size  Max_age   Pages   Count   Full?  Evicted Evict_Time OOM
       1      80B        93s       1      20      no        0        0    0
       2     104B        93s       1      16      no        0        0    0
       3     136B      1335s       1      28      no        0        0    0
       4     176B      1335s       1      24      no        0        0    0
       5     224B      1335s       1      32      no        0        0    0
       6     280B      1335s       1      34      no        0        0    0
       7     352B      1335s       1      36      no        0        0    0
       8     440B      1335s       1      46      no        0        0    0
       9     552B      1335s       1      58      no        0        0    0
      10     696B      1335s       1      66      no        0        0    0
      11     872B      1335s       1      89      no        0        0    0
      12     1.1K      1335s       1     112      no        0        0    0
      13     1.3K      1335s       1     145      no        0        0    0
      14     1.7K      1335s       1     123      no        0        0    0
      15     2.1K      1335s       1     198      no        0        0    0
      16     2.6K      1335s       1     199      no        0        0    0
      17     3.3K      1335s       1     229      no        0        0    0
      18     4.1K      1335s       1     248     yes       36        2    0
      19     5.2K      1335s       2     328      no        0        0    0
      20     6.4K      1335s       2     316     yes      387        1    0
      21     8.1K      1335s       3     381     yes      492        1    0
      22    10.1K      1335s       3     303     yes      598        2    0
      23    12.6K      1335s       5     405     yes      605        1    0
      24    15.8K      1335s       6     384     yes      766        2    0
      25    19.7K      1335s       7     357     yes      908      170    0
      26    24.6K      1336s       7     287     yes     1012        1    0
      27    30.8K      1336s       7     231     yes     1193      169    0
      28    38.5K      1336s       4     104     yes     1323      169    0
      29    48.1K      1336s       1      21     yes     1287        1    0
      30    60.2K      1336s       1      17     yes     1093      169    0
      31    75.2K      1337s       1      13     yes      713      168    0
      32    94.0K      1337s       1      10     yes      278      168    0
      33   117.5K      1336s       1       3      no        0        0    0

This output is the same if you specify the `command' as `display':

     shell> memcached-tool localhost:11211 display
       #  Item_Size  Max_age   Pages   Count   Full?  Evicted Evict_Time OOM
       1      80B        93s       1      20      no        0        0    0
       2     104B        93s       1      16      no        0        0    0
     ...

The output shows a summarized version of the output from the `slabs'
statistics. The columns provided in the output are shown below:

   * `#': The slab number

   * `Item_Size': The size of the slab

   * `Max_age': The age of the oldest item in the slab

   * `Pages': The number of pages allocated to the slab

   * `Count': The number of items in this slab

   * `Full?': Whether the slab is fully populated

   * `Evicted': The number of objects evicted from this slab

   * `Evict_Time': The time (in seconds) since the last eviction

   * `OOM': The number of items that have triggered an out of memory
     error

You can also obtain a dump of the general statistics for the server
using the `stats' command:

     shell> memcached-tool localhost:11211 stats
     #localhost:11211   Field       Value
              accepting_conns           1
                        bytes         162
                   bytes_read         485
                bytes_written        6820
                   cas_badval           0
                     cas_hits           0
                   cas_misses           0
                    cmd_flush           0
                      cmd_get           4
                      cmd_set           2
                  conn_yields           0
        connection_structures          11
             curr_connections          10
                   curr_items           2
                    decr_hits           0
                  decr_misses           1
                  delete_hits           0
                delete_misses           0
                    evictions           0
                     get_hits           4
                   get_misses           0
                    incr_hits           0
                  incr_misses           2
               limit_maxbytes    67108864
          listen_disabled_num           0
                          pid       12981
                 pointer_size          32
                rusage_system    0.013911
                  rusage_user    0.011876
                      threads           4
                         time  1255518565
            total_connections          20
                  total_items           2
                       uptime         880
                      version       1.4.2


File: manual.info,  Node: ha-memcached-faq,  Prev: ha-memcached-stats,  Up: ha-memcached

15.6.5 `memcached' FAQ
----------------------

*Questions*
   * 16.6.5.1: Can memcached be run on a Windows environment?

   * 16.6.5.2: What is the maximum size of an object you can store in
     memcached? Is that configurable?

   * 16.6.5.3: Is it true `memcached' will be much more effective with
     db-read-intensive applications than with db-write-intensive
     applications?

   * 16.6.5.4: Is there any overhead in not using persistent
     connections? If persistent is always recommended, what are the
     downsides (for example, locking up)?

   * 16.6.5.5: How is an event such as a crash of one of the
     `memcached' servers handled by the `memcached' client?

   * 16.6.5.6: What is a recommended hardware configuration for a
     memcached server?

   * 16.6.5.7: Is memcached more effective for video and audio as
     opposed to textual read/writes?

   * 16.6.5.8: Can `memcached' work with ASPX?

   * 16.6.5.9: How expensive is it to establish a memcache connection?
     Should those connections be pooled?

   * 16.6.5.10: How is the data handled when the `memcached' server is
     down?

   * 16.6.5.11: How are auto-increment columns in the MySQL database
     coordinated across multiple instances of memcached?

   * 16.6.5.12: Is compression available?

   * 16.6.5.13: Can we implement different types of `memcached' as
     different nodes in the same server, so can there be deterministic
     and non-deterministic in the same server?

   * 16.6.5.14: What are best practices for testing an implementation,
     to ensure that it improves performance, and to measure the impact
     of `memcached' configuration changes? And would you recommend
     keeping the configuration very simple to start?

*Questions and Answers* *16.6.5.1: ** Can memcached be run on a Windows
environment?  *

No. Currently `memcached' is available only on the Unix/Linux platform.
There is an unofficial port available, see
`http://www.codeplex.com/memcachedproviders'.

*16.6.5.2: ** What is the maximum size of an object you can store in
memcached? Is that configurable?  *

The default maximum object size is 1MB. In `memcached' 1.4.2 and later,
you can change the maximum size of an object using the `-I' command
line option.

For versions before this, to increase this size, you have to re-compile
`memcached'. You can modify the value of the `POWER_BLOCK' within the
`slabs.c' file within the source.

In `memcached' 1.4.2 and higher, you can configure the maximum
supported object size by using the `-I' command-line option. For
example, to increase the maximum object size to 5MB:

     $ memcached -I 5m

If an object is larger than the maximum object size, you must manually
split it. `memcached' is very simple: you give it a key and some data,
it tries to cache it in RAM. If you try to store more than the default
maximum size, the value is just truncated for speed reasons.

*16.6.5.3: ** Is it true `memcached' will be much more effective with
db-read-intensive applications than with db-write-intensive
applications?  *

Yes. `memcached' plays no role in database writes, it is a method of
caching data already read from the database in RAM.

*16.6.5.4: ** Is there any overhead in not using persistent
connections? If persistent is always recommended, what are the
downsides (for example, locking up)?  *

If you don't use persistent connections when communicating with
`memcached', there will be a small increase in the latency of opening
the connection each time. The effect is comparable to use nonpersistent
connections with MySQL.

In general, the chance of locking or other issues with persistent
connections is minimal, because there is very little locking within
`memcached'. If there is a problem, eventually your request will time
out and return no result, so your application will need to load from
MySQL again.

*16.6.5.5: ** How is an event such as a crash of one of the `memcached'
servers handled by the `memcached' client?  *

There is no automatic handling of this. If your client fails to get a
response from a server, code a fallback mechanism to load the data from
the MySQL database.

The client APIs all provide the ability to add and remove `memcached'
instances on the fly. If within your application you notice that
`memcached' server is no longer responding, you can remove the server
from the list of servers, and keys will automatically be redistributed
to another `memcached' server in the list. If retaining the cache
content on all your servers is important, make sure you use an API that
supports a consistent hashing algorithm. For more information, see
*Note ha-memcached-using-hashtypes::.

*16.6.5.6: ** What is a recommended hardware configuration for a
memcached server?  *

`memcached' has a very low processing overhead.  All that is required
is spare physical RAM capacity. A `memcached' server does not require a
dedicated machine. If you have web, application, or database servers
that have spare RAM capacity, then use them with `memcached'.

To build and deploy a dedicated `memcached' server, use a relatively
low-power CPU, lots of RAM, and one or more Gigabit Ethernet interfaces.

*16.6.5.7: ** Is memcached more effective for video and audio as
opposed to textual read/writes?  *

`memcached' works equally well for all kinds of data. To `memcached',
any value you store is just a stream of data. Remember, though, that
the maximum size of an object you can store in `memcached' is 1MB, but
can be configured to be larger by using the `-I' option in `memcached'
1.4.2 and later, or by modifying the source in versions before 1.4.2.
If you plan on using `memcached' with audio and video content, you will
probably want to increase the maximum object size. Also remember that
`memcached' is a solution for caching information for reading. It
shouldn't be used for writes, except when updating the information in
the cache.

*16.6.5.8: ** Can `memcached' work with ASPX?  *

There are ports and interfaces for many languages and environments.
ASPX relies on an underlying language such as C# or VisualBasic, and if
you are using ASP.NET then there is a C# `memcached' library. For more
information, see `https://sourceforge.net/projects/memcacheddotnet/'.

*16.6.5.9: ** How expensive is it to establish a memcache connection?
Should those connections be pooled?  *

Opening the connection is relatively inexpensive, because there is no
security, authentication or other handshake taking place before you can
start sending requests and getting results. Most APIs support a
persistent connection to a `memcached' instance to reduce the latency.
Connection pooling would depend on the API you are using, but if you
are communicating directly over TCP/IP, then connection pooling would
provide some small performance benefit.

*16.6.5.10: ** How is the data handled when the `memcached' server is
down?  *

The behavior is entirely application dependent. Most applications fall
back to loading the data from the database (just as if they were
updating the `memcached' information). If you are using multiple
`memcached' servers, you might also remove a downed server from the
list to prevent it from affecting performance. Otherwise, the client
will still attempt to communicate with the `memcached' server that
corresponds to the key you are trying to load.

*16.6.5.11: ** How are auto-increment columns in the MySQL database
coordinated across multiple instances of memcached?  *

They aren't. There is no relationship between MySQL and `memcached'
unless your application (or, if you are using the MySQL UDFs for
`memcached', your database definition) creates one.

If you are storing information based on an auto-increment key into
multiple instances of `memcached', the information is only stored on
one of the `memcached' instances anyway. The client uses the key value
to determine which `memcached' instance to store the information. It
doesn't store the same information across all the instances, as that
would be a waste of cache memory.

*16.6.5.12: ** Is compression available?  *

Yes. Most of the client APIs support some sort of compression, and some
even allow you to specify the threshold at which a value is deemed
appropriate for compression during storage.

*16.6.5.13: ** Can we implement different types of `memcached' as
different nodes in the same server, so can there be deterministic and
non-deterministic in the same server?  *

Yes. You can run multiple instances of `memcached' on a single server,
and in your client configuration you choose the list of servers you
want to use.

*16.6.5.14: ** What are best practices for testing an implementation,
to ensure that it improves performance, and to measure the impact of
`memcached' configuration changes? And would you recommend keeping the
configuration very simple to start?  *

The best way to test the performance is to start up a `memcached'
instance. First, modify your application so that it stores the data
just before the data is about to be used or displayed into `memcached'.
Since the APIs handle the serialization of the data, it should just be
a one-line modification to your code. Then, modify the start of the
process that would normally load that information from MySQL with the
code that requests the data from `memcached'. If the data cannot be
loaded from `memcached', default to the MySQL process.

All of the changes required will probably amount to just a few lines of
code. To get the best benefit, make sure you cache entire objects (for
example, all the components of a web page, blog post, discussion
thread, and so on), rather than using `memcached' as a simple cache of
individual rows of MySQL tables.

Keeping the configuration simple at the start, or even over the long
term, is easy with `memcached'. Once you have the basic structure up
and running, often the only ongoing change is to add more servers into
the list of servers used by your applications. You don't need to manage
the `memcached' servers, and there is no complex configuration; just
add more servers to the list and let the client API and the `memcached'
servers make the decisions.


File: manual.info,  Node: mysql-proxy,  Prev: ha-memcached,  Up: ha-overview

15.7 MySQL Proxy
================

* Menu:

* mysql-proxy-platforms::        MySQL Proxy Supported Platforms
* mysql-proxy-install::          Installing MySQL Proxy
* mysql-proxy-configuration::    MySQL Proxy Command Options
* mysql-proxy-scripting::        MySQL Proxy Scripting
* mysql-proxy-using::            Using MySQL Proxy
* mysql-proxy-faq::              MySQL Proxy FAQ

The MySQL Proxy is an application that communicates over the network
using the MySQL network protocol and provides communication between one
or more MySQL servers and one or more MySQL clients. Because MySQL
Proxy uses the MySQL network protocol, it can be used without
modification with any MySQL-compatible client that uses the protocol.
This includes the *Note `mysql': mysql. command-line client, any
clients that uses the MySQL client libraries, and any connector that
supports the MySQL network protocol.

In the most basic configuration, MySQL Proxy simply interposes itself
between the server and clients, passing queries from the clients to the
MySQL Server and returning the responses from the MySQL Server to the
appropriate client. In more advanced configurations, the MySQL Proxy
can also monitor and alter the communication between the client and the
server. Query interception enables you to add profiling, and
interception of the exchanges is scriptable using the Lua scripting
language.

By intercepting the queries from the client, the proxy can insert
additional queries into the list of queries sent to the server, and
remove the additional results when they are returned by the server.
Using this functionality you can return the results from the original
query to the client while adding informational statements to each
query, for example, to monitor their execution time or progress, and
separately log the results.

The proxy enables you to perform additional monitoring, filtering, or
manipulation of queries without requiring you to make any modifications
to the client and without the client even being aware that it is
communicating with anything but a genuine MySQL server.

This documentation covers MySQL Proxy 0.8.2.  And MySQL Proxy contains
third-party code. For license information on third-party code, see
*Note licenses-third-party::.

*Warning*:

MySQL Proxy is currently an Alpha release and should not be used within
production environments.

*Important*:

MySQL Proxy is compatible with MySQL 5.0 or later. Testing has not been
performed with Version 4.1. Please provide feedback on your experiences
using the MySQL Proxy Forum (http://forums.mysql.com/list.php?146).

For release notes detailing the changes in each release of MySQL Proxy,
see MySQL Proxy Release Notes
(http://dev.mysql.com/doc/relnotes/mysql-proxy/en/).


File: manual.info,  Node: mysql-proxy-platforms,  Next: mysql-proxy-install,  Prev: mysql-proxy,  Up: mysql-proxy

15.7.1 MySQL Proxy Supported Platforms
--------------------------------------

MySQL Proxy is currently available as a precompiled binary for the
following platforms:

   * Linux (including Red Hat, Fedora, Debian, SuSE) and derivatives

   * Mac OS X

   * FreeBSD

   * IBM AIX

   * Sun Solaris

   * Microsoft Windows (including Microsoft Windows XP, Microsoft
     Windows Vista, Microsoft Windows Server 2003, Microsoft Windows
     Server 2008)

     *Note*:

     You must have the .NET Framework 1.1 or higher installed.

Other Unix/Linux platforms not listed should be compatible by using the
source package and building MySQL Proxy locally.

System requirements for the MySQL Proxy application are the same as the
main MySQL server. Currently MySQL Proxy is compatible only with MySQL
5.0.1 and later. MySQL Proxy is provided as a standalone, statically
linked binary. You need not have MySQL or Lua installed.


File: manual.info,  Node: mysql-proxy-install,  Next: mysql-proxy-configuration,  Prev: mysql-proxy-platforms,  Up: mysql-proxy

15.7.2 Installing MySQL Proxy
-----------------------------

* Menu:

* mysql-proxy-install-binary::   Installing MySQL Proxy from a Binary Distribution
* mysql-proxy-install-source::   Installing MySQL Proxy from a Source Distribution
* mysql-proxy-install-cvs::      Installing MySQL Proxy from the Bazaar Repository
* mysql-proxy-configuration-windows::  Setting Up MySQL Proxy as a Windows Service

You have three choices for installing MySQL Proxy:

   * Precompiled binaries are available for a number of different
     platforms. See *Note mysql-proxy-install-binary::.

   * You can install from the source code to build on an environment
     not supported by the binary distributions. See *Note
     mysql-proxy-install-source::.

   * The latest version of the MySQL Proxy source code is available
     through a development repository is the best way to stay up to
     date with the latest fixes and revisions. See *Note
     mysql-proxy-install-cvs::.


File: manual.info,  Node: mysql-proxy-install-binary,  Next: mysql-proxy-install-source,  Prev: mysql-proxy-install,  Up: mysql-proxy-install

15.7.2.1 Installing MySQL Proxy from a Binary Distribution
..........................................................

If you download a binary package, you must extract and copy the package
contents to your desired installation directory. The package contains
files required by MySQL Proxy, including additional Lua scripts and
other components required for execution.

To install, unpack the archive into the desired directory, then modify
your `PATH' environment variable so that you can use the *Note
`mysql-proxy': mysql-proxy. command directly:

     shell> cd /usr/local
     shell> tar zxf mysql-proxy-0.8.2-PLATFORM.tar.gz
     shell> PATH=$PATH:/usr/local/mysql-proxy-0.8.2-PLATFORM/sbin

To update the path globally on a system, you might need administrator
privileges to modify the appropriate `/etc/profile', `/etc/bashrc', or
other system configuration file.

On Windows, you can update the `PATH' environment variable using this
procedure:

  1. On the Windows desktop, right-click the `My Computer' icon, and
     select `Properties'.

  2. Next select the `Advanced' tab from the `System Properties' menu
     that appears, and click the `Environment Variables' button.

  3. Under `System Variables', select `Path', then click the `Edit'
     button. The `Edit System Variable' dialogue should appear.

The Microsoft Visual C++ runtime libraries are a requirement for
running MySQL Proxy as of version 0.8.2. Users that do not have these
libraries must download and install the Microsoft Visual C++ 2008
Service Pack 1 Redistributable Package MFC Security Update. Use the
following link to obtain the package:

     `http://www.microsoft.com/download/en/details.aspx?id=26368'


File: manual.info,  Node: mysql-proxy-install-source,  Next: mysql-proxy-install-cvs,  Prev: mysql-proxy-install-binary,  Up: mysql-proxy-install

15.7.2.2 Installing MySQL Proxy from a Source Distribution
..........................................................

You can download a source package and compile the MySQL Proxy yourself.
To build from source, you must have the following prerequisite
components installed:

   * `libevent' 1.x or higher (1.3b or later is preferred).

   * `lua' 5.1.x or higher.

   * `glib2' 2.6.0 or higher.

   * `pkg-config'.

   * `libtool' 1.5 or higher.

   * MySQL 5.0.x or higher developer files.

*Note*:

On some operating systems, you might need to manually build the
required components to get the latest version. If you have trouble
compiling MySQL Proxy, consider using a binary distributions instead.

After verifying that the prerequisite components are installed,
configure and build MySQL Proxy:

     shell> tar zxf mysql-proxy-0.8.2.tar.gz
     shell> cd mysql-proxy-0.8.2
     shell> ./configure
     shell> make

To test the build, use the `check' target to `make':

     shell> make check

The tests try to connect to `localhost' using the `root' user. To
provide a password, set the `MYSQL_PASSWORD' environment variable:

     shell> MYSQL_PASSWORD=root_pwd make check

You can install using the `install' target:

     shell> make install

By default, *Note `mysql-proxy': mysql-proxy. is installed into
`/usr/local/sbin/mysql-proxy'. The Lua example scripts are installed
into `/usr/local/share'.


File: manual.info,  Node: mysql-proxy-install-cvs,  Next: mysql-proxy-configuration-windows,  Prev: mysql-proxy-install-source,  Up: mysql-proxy-install

15.7.2.3 Installing MySQL Proxy from the Bazaar Repository
..........................................................

The MySQL Proxy source is available through a public Bazaar repository
and is the quickest way to get the latest releases and fixes.

A build from the Bazaar repository requires that the following
prerequisite components be installed:

   * Bazaar 1.10.0 or later.

   * `libtool' 1.5 or higher.

   * `autoconf' 2.56 or higher.

   * `automake' 1.10 or higher.

   * `libevent' 1.x or higher (1.3b or later is preferred).

   * `lua' 5.1.x or higher.

   * `glib2' 2.4.0 or higher.

   * `pkg-config'.

   * MySQL 5.0.x or higher developer files.

The *Note `mysql-proxy': mysql-proxy. source is hosted on Launchpad. To
check out a local copy of the Bazaar repository, use `bzr':

     shell> bzr branch lp:mysql-proxy

The preceding command downloads a complete version of the Bazaar
repository for *Note `mysql-proxy': mysql-proxy. The main source files
are located within the `trunk' subdirectory. The configuration scripts
must be generated before you can configure and build *Note
`mysql-proxy': mysql-proxy. The `autogen.sh' script generates the
required configuration scripts for you:

     shell> sh ./autogen.sh

The `autogen.sh' script creates the standard `configure' script, which
you then use to configure and build with `make':

     shell> ./configure
     shell> make
     shell> make install

To create a standalone source distribution, identical to the source
distribution available for download, use this command:

     shell> make distcheck

The preceding command creates the file `mysql-proxy-0.8.2.tar.gz' (with
the corresponding current version) within the current directory.


File: manual.info,  Node: mysql-proxy-configuration-windows,  Prev: mysql-proxy-install-cvs,  Up: mysql-proxy-install

15.7.2.4 Setting Up MySQL Proxy as a Windows Service
....................................................

The MySQL distribution on Windows includes the `mysql-proxy-svc.exe'
command that enables a MySQL Proxy instance to be managed by the
Windows service control manager. You can control the service, including
automatically starting and stopping it during boot, reboot and
shutdown, without separately running the MySQL Proxy application.

To set up a MySQL Proxy service, use the `sc' command to create a new
service using the MySQL Proxy service command. Specify the MySQL Proxy
options on the `sc' command line, and identify the service with a
unique name. For example, to configure a new MySQL Proxy instance that
will automatically start when your system boots, redirecting queries to
the local MySQL server:

     C:\> sc create "Proxy" DisplayName= "MySQL Proxy" start= "auto" »
       binPath= "C:\Program Files\MySQL\mysql-proxy-0.8.2\bin\mysql-proxy-svc.exe »
       --proxy-backend-addresses=127.0.0.1:3306"

*Note*:

The space following the equal sign after each property is required;
failure to include it results in an error.

The preceding command creates a new service called `Proxy'. You can
start and stop the service using the `net start|stop' command with the
service name. The service is not automatically started after it is
created. To start the service:

     C:\> net start proxy
     The MySQL Proxy service is starting.
     The MySQL Proxy service was started successfully.

You can specify additional command-line options to the `sc' command.
You can also set up multiple MySQL Proxy services on the same machine
(providing they are configured to listen on different ports and/or IP
addresses.

You can delete a service that you have created:

     C:\> sc delete proxy

For more information on creating services using `sc', see How to create
a Windows service by using Sc.exe
(http://support.microsoft.com/kb/251192).


File: manual.info,  Node: mysql-proxy-configuration,  Next: mysql-proxy-scripting,  Prev: mysql-proxy-install,  Up: mysql-proxy

15.7.3 MySQL Proxy Command Options
----------------------------------

To start MySQL Proxy, you can run it directly from the command line:

     shell> mysql-proxy

For most situations, you specify at least the host name or address and
the port number of the backend MySQL server to which the MySQL Proxy
should pass queries.

You can specify options to *Note `mysql-proxy': mysql-proxy. either on
the command line, or by using a configuration file and the
`--defaults-file' command-line option to specify the file location.

If you use a configuration file, format it as follows:

   * Specify the options within a `[mysql-proxy]' configuration group.
     For example:

          [mysql-proxy]
          admin-address = HOST:PORT

   * Specify all configuration options in the form of a configuration
     name and the value to set.

   * For options that are a simple toggle on the command line (for
     example, `--proxy-skip-profiling'), use `true' or `false'. For
     example, the following is invalid:

          [mysql-proxy]
          proxy-skip-profiling

     But this is valid:

          [mysql-proxy]
          proxy-skip-profiling = true

   * Give the configuration file Unix permissions of `0660' (readable
     and writable by user and group, no access for others).

Failure to adhere to any of these requirements causes *Note
`mysql-proxy': mysql-proxy. to generate an error during startup.

The following tables list the supported configuration file and
command-line options.

*`mysql-proxy' Help Options*

Format      Option File Description
-help                   Show help options
-help-admin             Show admin module options
-help-all               Show all help options
-help-proxy             Show proxy module options

*`mysql-proxy' Admin Options*

Format      Option File Description
-admin-address=host:portadmin-address=host:portThe admin module listening
                        host and port
-admin-lua-script=file_nameadmin-lua-script=file_nameScript to execute by the
                        admin module
-admin-password=passwordadmin-password=passwordAuthentication password for
                        admin module
-admin-username=user_nameadmin-username=user_nameAuthentication user name for
                        admin module
-proxy-address=host:portproxy-address=host:portThe listening proxy server
                        host and port

*`mysql-proxy' Proxy Options*

Format      Option File Description                   Removed
-no-proxy   no-proxy    Do not start the proxy module 
-proxy-backend-addresses=host:portproxy-backend-addresses=host:portThe MySQL server host and     
                        port                          
-proxy-fix-bug-25371proxy-fix-bug-25371Enable the fix for Bug        0.8.1
                        #25371 for older libmysql     
                        versions                      
-proxy-lua-script=file_nameproxy-lua-script=file_nameFilename for Lua script for   
                        proxy operations              
-proxy-pool-no-change-userproxy-pool-no-change-userDo not use the protocol       
                        CHANGE_USER command to reset  
                        the connection when coming    
                        from the connection pool      
-proxy-read-only-backend-addresses=host:portproxy-read-only-backend-addresses=host:portThe MySQL server host and     
                        port (read only)              
-proxy-skip-profilingproxy-skip-profilingDisable query profiling       

*`mysql-proxy' Applications Options*

Format      Option File Description
-basedir=dir_namebasedir=dir_nameThe base directory prefix
                        for paths in the
                        configuration
-daemon     daemon      Start in daemon mode
-defaults-file=file_name            The configuration file to use
-event-threads=countevent-threads=countThe number of event-handling
                        threads
-keepalive  keepalive   Try to restart the proxy if
                        a crash occurs
-log-backtrace-on-crashlog-backtrace-on-crashTry to invoke the debugger
                        and generate a backtrace on
                        crash
-log-file=file_namelog-file=file_nameThe file where error
                        messages are logged
-log-level=levellog-level=levelThe logging level
-log-use-sysloglog-use-syslogLog errors to syslog
-lua-cpath=dir_namelua-cpath=dir_nameSet the LUA_CPATH
-lua-path=dir_namelua-path=dir_nameSet the LUA_PATH
-max-open-files=countmax-open-files=countThe maximum number of open
                        files to support
-pid-file=file_namepid-file=file_nameFile in which to store the
                        process ID
-plugin-dir=dir_nameplugin-dir=dir_nameDirectory containing plugin
                        files
-plugins=plugin,...plugins=plugin,...List of plugins to load
-user=user_nameuser=user_nameThe user to use when running
                        mysql-proxy
-version                Show version information

Except as noted in the following details, all of the options can be
used within the configuration file by supplying the option and the
corresponding value. For example:

     [mysql-proxy]
     log-file = /var/log/mysql-proxy.log
     log-level = message

   *  `--help', `-h'

     Options for help

     *Command-Line        `--help'        
     Format*                              
                          `-h'            

     Show available help options.

   *  `--help-admin'

     Options for help-admin

     *Command-Line        `--help-admin'        
     Format*                              

     Show options for the admin module.

   *  `--help-all'

     Options for help-all

     *Command-Line        `--help-all'        
     Format*                              

     Show all help options.

   *  `--help-proxy'

     Options for help-proxy

     *Command-Line        `--help-proxy'        
     Format*                              

     Show options for the proxy module.

   *  `--admin-address=HOST:PORT'

     Options for admin-address

     *Command-Line        `--admin-address=host:port'        
     Format*                              
     *Option-File Format* `admin-address=host:port'        
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `:4041'         

     The host name (or IP address) and port for the administration
     port. The default is `localhost:4041'.

   *  `--admin-lua-script=FILE_NAME'

     Options for admin-lua-script

     *Command-Line        `--admin-lua-script=file_name'        
     Format*                              
     *Option-File Format* `admin-lua-script=file_name'        
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           
     *Default*            `'              

     The script to use for the proxy administration module.

   *  `--admin-password=PASSWORD'

     Options for admin-password

     *Command-Line        `--admin-password=password'        
     Format*                              
     *Option-File Format* `admin-password=password'        
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `'              

     The password to use to authenticate users wanting to connect to
     the MySQL Proxy administration module. This module uses the MySQL
     protocol to request a user name and password for connections.

   *  `--admin-username=USER_NAME'

     Options for admin-username

     *Command-Line        `--admin-username=user_name'        
     Format*                              
     *Option-File Format* `admin-username=user_name'        
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `root'          

     The user name to use to authenticate users wanting to connect to
     the MySQL Proxy administration module. This module uses the MySQL
     protocol to request a user name and password for connections. The
     default user name is `root'.

   *  `--basedir=DIR_NAME'

     Options for basedir

     *Command-Line        `--basedir=dir_name'        
     Format*                              
     *Option-File Format* `basedir=dir_name'        
                          *Permitted        
                          Values*         
     *Type*               `directory        
                          name'           

     The base directory to use as a prefix for all other file name
     configuration options. The base name should be an absolute (not
     relative) directory. If you specify a relative directory, *Note
     `mysql-proxy': mysql-proxy. generates an error during startup.

   *  `--daemon'

     Options for daemon

     *Command-Line        `--daemon'        
     Format*                              
     *Option-File Format* `daemon'        

     Starts the proxy in daemon mode.

   *  `--defaults-file=FILE_NAME'

     Options for defaults-file

     *Command-Line        `--defaults-file=file_name'        
     Format*                              

     The file to read for configuration options. If not specified,
     MySQL Proxy takes options only from the command line.

   *  `--event-threads=COUNT'

     Options for event-threads

     *Command-Line        `--event-threads=count'        
     Format*                              
     *Option-File Format* `event-threads=count'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1'             

     The number of event threads to reserve to handle incoming requests.

   *  `--keepalive'

     Options for keepalive

     *Command-Line        `--keepalive'        
     Format*                              
     *Option-File Format* `keepalive'        

     Create a process surrounding the main *Note `mysql-proxy':
     mysql-proxy. process that attempts to restart the main *Note
     `mysql-proxy': mysql-proxy. process in the event of a crash or
     other failure.

     *Note*:

     The `--keepalive' option is not available on Microsoft Windows.
     When running as a service, *Note `mysql-proxy': mysql-proxy.
     automatically restarts.

   *  `--log-backtrace-on-crash'

     Options for log-backtrace-on-crash

     *Command-Line        `--log-backtrace-on-crash'        
     Format*                              
     *Option-File Format* `log-backtrace-on-crash'        

     Log a backtrace to the error log and try to initialize the
     debugger in the event of a failure.

   *  `--log-file=FILE_NAME'

     Options for log-file

     *Command-Line        `--log-file=file_name'        
     Format*                              
     *Option-File Format* `log-file=file_name'        
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The file to use to record log information. If this option is not
     given, *Note `mysql-proxy': mysql-proxy. logs to the standard
     error output.

   *  `--log-level=LEVEL'

     Options for log-level

     *Command-Line        `--log-level=level'        
     Format*                              
     *Option-File Format* `log-level=level'        
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Valid Values*       `error'         
     `warning'                            
     `info'                               
     `message'                            
     `debug'                              

     The log level to use when outputting error messages. Messages with
     that level (or lower) are output. For example, `message' level
     also outputs message with `info', `warning', and `error' levels.

   *  `--log-use-syslog'

     Options for log-use-syslog

     *Command-Line        `--log-use-syslog'        
     Format*                              
     *Option-File Format* `log-use-syslog'        

     Log errors to the syslog (Unix/Linux only).

   *  `--lua-cpath=DIR_NAME'

     Options for lua-cpath

     *Command-Line        `--lua-cpath=dir_name'        
     Format*                              
     *Option-File Format* `lua-cpath=dir_name'        
                          *Permitted        
                          Values*         
     *Type*               `directory        
                          name'           

     The `LUA_CPATH' to use when loading compiled modules or libraries
     for Lua scripts.

   *  `--lua-path=DIR_NAME'

     Options for lua-path

     *Command-Line        `--lua-path=dir_name'        
     Format*                              
     *Option-File Format* `lua-path=dir_name'        
                          *Permitted        
                          Values*         
     *Type*               `directory        
                          name'           

     The `LUA_CPATH' to use when loading modules for Lua.

   *  `--max-open-files=COUNT'

     Options for max-open-files

     *Command-Line        `--max-open-files=count'        
     Format*                              
     *Option-File Format* `max-open-files=count'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        

     The maximum number of open files and sockets supported by the
     *Note `mysql-proxy': mysql-proxy. process. Certain scripts might
     require a higher value.

   *  `--no-proxy'

     Options for no-proxy

     *Command-Line        `--no-proxy'        
     Format*                              
     *Option-File Format* `no-proxy'        

     Disable the proxy module.

   *  `--plugin-dir=DIR_NAME'

     Options for plugin-dir

     *Command-Line        `--plugin-dir=dir_name'        
     Format*                              
     *Option-File Format* `plugin-dir=dir_name'        
                          *Permitted        
                          Values*         
     *Type*               `directory        
                          name'           

     The directory to use when loading plugins for *Note `mysql-proxy':
     mysql-proxy.

   *  `--plugins=PLUGIN'

     Options for plugins

     *Command-Line        `--plugins=plugin,...'        
     Format*                              
     *Option-File Format* `plugins=plugin,...'        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     Loads a plugin.

     When using this option on the command line, you can specify the
     option multiple times to specify multiple plugins. For example:

          shell> mysql-proxy --plugins=proxy --plugins=admin

     When using the option within the configuration file, you should
     separate multiple plugins by commas. The equivalent of the
     preceding example would be:

          ...
          plugins=proxy,admin

   *  `--proxy-address=HOST:PORT', `-P HOST:PORT'

     Options for proxy-address

     *Command-Line        `--proxy-address=host:port'        
     Format*                              
                          `-P             
                          host:port'        
     *Option-File Format* `proxy-address=host:port'        
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `:4040'         

     The listening host name (or IP address) and port of the proxy
     server. The default is `:4040' (all IPs on port 4040).

   *  `--proxy-read-only-backend-addresses=HOST:PORT', `-r HOST:PORT'

     Options for proxy-read-only-backend-addresses

     *Command-Line        `--proxy-read-only-backend-addresses=host:port'        
     Format*                              
                          `-r             
                          host:port'        
     *Option-File Format* `proxy-read-only-backend-addresses=host:port'        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The listening host name (or IP address) and port of the proxy
     server for read-only connections. The default is for this
     information not to be set.

     *Note*:

     Setting this value only configures the servers within the
     corresponding internal structure (see `proxy.global.backends').
     You can determine the backend type by checking the `type' field
     for each connection.

     You should therefore only use this option in combination with a
     script designed to make use of the different backend types.

     When using this option on the command line, you can specify the
     option and the server multiple times to specify multiple backends.
     For example:

          shell> mysql-proxy --proxy-read-only-backend-addresses=192.168.0.1:3306 --proxy-read-only-backend-addresses=192.168.0.2:3306

     When using the option within the configuration file, you should
     separate multiple servers by commas. The equivalent of the
     preceding example would be:

          ...
          proxy-read-only-backend-addresses = 192.168.0.1:3306,192.168.0.2:3306

   *  `--proxy-backend-addresses=HOST:PORT', `-b HOST:PORT'

     Options for proxy-backend-addresses

     *Command-Line        `--proxy-backend-addresses=host:port'        
     Format*                              
                          `-b             
                          host:port'        
     *Option-File Format* `proxy-backend-addresses=host:port'        
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `127.0.0.1:3306'        

     The host name (or IP address) and port of the MySQL server to
     connect to. You can specify multiple backend servers by supplying
     multiple options. Clients are connected to each backend server in
     round-robin fashion. For example, if you specify two servers A and
     B, the first client connection will go to server A; the second
     client connection to server B and the third client connection to
     server A.

     When using this option on the command line, you can specify the
     option and the server multiple times to specify multiple backends.
     For example:

          shell> mysql-proxy --proxy-backend-addresses 192.168.0.1:3306 --proxy-backend-addresses 192.168.0.2:3306

     When using the option within the configuration file, you should
     separate multiple servers by commas. The equivalent of the
     preceding example would be:

          ...
          proxy-backend-addresses = 192.168.0.1:3306,192.168.0.2:3306

   *  `--proxy-pool-no-change-user'

     Options for proxy-pool-no-change-user

     *Command-Line        `--proxy-pool-no-change-user'        
     Format*                              
     *Option-File Format* `proxy-pool-no-change-user'        

     Disable use of the MySQL protocol `CHANGE_USER' command when
     reusing a connection from the pool of connections specified by the
     `proxy-backend-addresses' list.

   *  `--proxy-skip-profiling'

     Options for proxy-skip-profiling

     *Command-Line        `--proxy-skip-profiling'        
     Format*                              
     *Option-File Format* `proxy-skip-profiling'        

     Disable query profiling (statistics time tracking). The default is
     for tracking to be enabled.

   *  `--proxy-fix-bug-25371'

     Options for proxy-fix-bug-25371

     *Removed*            0.8.1           
     *Command-Line        `--proxy-fix-bug-25371'        
     Format*                              
     *Option-File Format* `proxy-fix-bug-25371'        

     Enable a workaround for an issue when connecting to a MySQL server
     later than 5.1.12 when using a MySQL client library of any earlier
     version.

     This option was removed in *Note `mysql-proxy': mysql-proxy.
     0.8.1. Now, *Note `mysql-proxy': mysql-proxy. returns an error
     message at the protocol level if it sees a `COM_CHANGE_USER' being
     sent to a server that has a version from 5.1.14 to 5.1.17.

   *  `--proxy-lua-script=FILE_NAME', `-s FILE_NAME'

     Options for proxy-lua-script

     *Command-Line        `--proxy-lua-script=file_name'        
     Format*                              
                          `-s             
                          file_name'        
     *Option-File Format* `proxy-lua-script=file_name'        
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The Lua script file to be loaded. Note that the script file is not
     physically loaded and parsed until a connection is made.  Also
     note that the specified Lua script is reloaded for each
     connection; if the content of the Lua script changes while *Note
     `mysql-proxy': mysql-proxy. is running, the updated content is
     automatically used when a new connection is made.

   *  `--pid-file=FILE_NAME'

     Options for pid-file

     *Command-Line        `--pid-file=file_name'        
     Format*                              
     *Option-File Format* `pid-file=file_name'        
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The name of the file in which to store the process ID.

   *  `--user=USER_NAME'

     Options for user

     *Command-Line        `--user=user_name'        
     Format*                              
     *Option-File Format* `user=user_name'        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     Run *Note `mysql-proxy': mysql-proxy. as the specified `user'.

   *  `--version', `-V'

     Options for version

     *Command-Line        `--version'        
     Format*                              
                          `-V'            

     Show the version number.

The most common usage is as a simple proxy service (that is, without
additional scripting). For basic proxy operation, you must specify at
least one `proxy-backend-addresses' option to specify the MySQL server
to connect to by default:

     shell> mysql-proxy --proxy-backend-addresses=MySQL.example.com:3306

The default proxy port is `4040', so you can connect to your MySQL
server through the proxy by specifying the host name and port details:

     shell> mysql --host=localhost --port=4040

If your server requires authentication information, this will be passed
through natively without alteration by *Note `mysql-proxy':
mysql-proxy, so you must also specify the required authentication
information:

     shell> mysql --host=localhost --port=4040 \
        --user=user_name --password=password

You can also connect to a read-only port (which filters out *Note
`UPDATE': update. and *Note `INSERT': insert. queries) by connecting to
the read-only port. By default the host name is the default, and the
port is `4042', but you can alter the host/port information by using the
`--proxy-read-only-backend-addresses' command-line option.

For more detailed information on how to use these command-line options,
and *Note `mysql-proxy': mysql-proxy. in general in combination with
Lua scripts, see *Note mysql-proxy-using::.


File: manual.info,  Node: mysql-proxy-scripting,  Next: mysql-proxy-using,  Prev: mysql-proxy-configuration,  Up: mysql-proxy

15.7.4 MySQL Proxy Scripting
----------------------------

* Menu:

* mysql-proxy-scripting-injection::  Proxy Scripting Sequence During Query Injection
* mysql-proxy-scripting-structures::  Internal Structures
* mysql-proxy-scripting-connect-server::  Capturing a Connection with `connect_server()'
* mysql-proxy-scripting-read-handshake::  Examining the Handshake with `read_handshake()'
* mysql-proxy-scripting-read-auth::  Examining the Authentication Credentials with `read_auth()'
* mysql-proxy-scripting-read-auth-result::  Accessing Authentication Information with `read_auth_result()'
* mysql-proxy-scripting-read-query::  Manipulating Queries with `read_query()'
* mysql-proxy-scripting-read-query-result::  Manipulating Results with `read_query_result()'

You can control how MySQL Proxy manipulates and works with the queries
and results that are passed on to the MySQL server through the use of
the embedded Lua scripting language. You can find out more about the
Lua programming language from the Lua Web site (http://www.lua.org).

The following diagram shows an overview of the classes exposed by MySQL
Proxy.

MySQL Proxy architecture

The primary interaction between MySQL Proxy and the server is provided
by defining one or more functions through an Lua script.  A number of
functions are supported, according to different events and operations
in the communication sequence between a client and one or more backend
MySQL servers:

   * `connect_server()': This function is called each time a connection
     is made to MySQL Proxy from a client.  You can use this function
     during load-balancing to intercept the original connection and
     decide which server the client should ultimately be attached to.
     If you do not define a special solution, a simple round-robin
     style distribution is used by default.

   * `read_handshake()': This function is called when the initial
     handshake information is returned by the server. You can capture
     the handshake information returned and provide additional checks
     before the authorization exchange takes place.

   * `read_auth()': This function is called when the authorization
     packet (user name, password, default database) are submitted by
     the client to the server for authentication.

   * `read_auth_result()': This function is called when the server
     returns an authorization packet to the client indicating whether
     the authorization succeeded.

   * `read_query()': This function is called each time a query is sent
     by the client to the server. You can use this to edit and
     manipulate the original query, including adding new queries before
     and after the original statement.  You can also use this function
     to return information directly to the client, bypassing the
     server, which can be useful to filter unwanted queries or queries
     that exceed known limits.

   * `read_query_result()': This function is called each time a result
     is returned from the server, providing you have manually injected
     queries into the query queue. If you have not explicitly injected
     queries within the `read_query()' function, this function is not
     triggered. You can use this to edit the result set, or to remove
     or filter the result sets generated from additional queries you
     injected into the queue when using `read_query()'.

The following table lists MySQL proxy and server communication
functions, the supplied information, and the direction of information
flow when the function is triggered.

This table lists MySQL proxy and server communication functions, the
supplied information, and the direction of information flow when the
function is triggered.

Function               Supplied Information   Direction
`connect_server()'     None                   Client to Server
`read_handshake()'     None                   Server to Client
`read_auth()'          None                   Client to Server
`read_auth_result()'   None                   Server to Client
`read_query()'         Query                  Client to Server
`read_query_result()'  Query result           Server to Client

By default, all functions return a result that indicates whether the
data should be passed on to the client or server (depending on the
direction of the information being transferred). This return value can
be overridden by explicitly returning a constant indicating that a
particular response should be sent. For example, it is possible to
construct result set information by hand within `read_query()' and to
return the result set directly to the client without ever sending the
original query to the server.

In addition to these functions, a number of built-in structures provide
control over how MySQL Proxy forwards queries and returns the results
by providing a simplified interface to elements such as the list of
queries and the groups of result sets that are returned.


File: manual.info,  Node: mysql-proxy-scripting-injection,  Next: mysql-proxy-scripting-structures,  Prev: mysql-proxy-scripting,  Up: mysql-proxy-scripting

15.7.4.1 Proxy Scripting Sequence During Query Injection
........................................................

The following figure gives an example of how the proxy might be used
when injecting queries into the query queue. Because the proxy sits
between the client and MySQL server, what the proxy sends to the
server, and the information that the proxy ultimately returns to the
client, need not match or correlate.  Once the client has connected to
the proxy, the sequence shown in the following diagram occurs for each
individual query sent by the client.

MySQL Proxy architecture

  1. When the client submits one query to the proxy, the `read_query()'
     function within the proxy is triggered. The function adds the
     query to the query queue.

  2. Once manipulation by `read_query()' has completed, the queries are
     submitted, sequentially, to the MySQL server.

  3. The MySQL server returns the results from each query, one result
     set for each query submitted. The `read_query_result()' function is
     triggered for each result set, and each invocation can decide
     which result set to return to the client

For example, you can queue additional queries into the global query
queue to be processed by the server. This can be used to add
statistical information by adding queries before and after the original
query, changing the original query:

     SELECT * FROM City;

Into a sequence of queries:

     SELECT NOW();
     SELECT * FROM City;
     SELECT NOW();

You can also modify the original statement; for example, to add *Note
`EXPLAIN': explain. to each statement executed to get information on
how the statement was processed, again altering our original SQL
statement into a number of statements:

     SELECT * FROM City;
     EXPLAIN SELECT * FROM City;

In both of these examples, the client would have received more result
sets than expected. Regardless of how you manipulate the incoming query
and the returned result, the number of queries returned by the proxy
must match the number of original queries sent by the client.

You could adjust the client to handle the multiple result sets sent by
the proxy, but in most cases you will want the existence of the proxy
to remain transparent. To ensure that the number of queries and result
sets match, you can use the MySQL Proxy `read_query_result()' to
extract the additional result set information and return only the
result set the client originally requested back to the client. You can
achieve this by giving each query that you add to the query queue a
unique ID, then filter out queries that do not match the original query
ID when processing them with `read_query_result()'.


File: manual.info,  Node: mysql-proxy-scripting-structures,  Next: mysql-proxy-scripting-connect-server,  Prev: mysql-proxy-scripting-injection,  Up: mysql-proxy-scripting

15.7.4.2 Internal Structures
............................

There are a number of internal structures within the scripting element
of MySQL Proxy. The primary structure is `proxy' and this provides an
interface to the many common structures used throughout the script,
such as connection lists and configured backend servers. Other
structures, such as the incoming packet from the client and result sets
are only available within the context of one of the scriptable
functions.

The following table describes common attributes of the MySQL `proxy'
scripting element.

This table describes common attributes of the MySQL `proxy' scripting
element.

Attribute              Description
`connection'           A structure containing the active client
                       connections. For a list of attributes, see
                       `proxy.connection'.
`servers'              A structure containing the list of configured
                       backend servers. For a list of attributes, see
                       `proxy.global.backends'.
`queries'              A structure containing the queue of queries that
                       will be sent to the server during a single client
                       query. For a list of attributes, see
                       `proxy.queries'.
`PROXY_VERSION'        The version number of MySQL Proxy, encoded in
                       hex. You can use this to check that the version
                       number supports a particular option from within
                       the Lua script. Note that the value is encoded as
                       a hex value, so to check the version is at least
                       0.5.1 you compare against `0x00501'.

*`proxy.connection'*

The `proxy.connection' object is read only, and provides information
about the current connection, and is split into a `client' and `server'
tables. This enables you to examine information about both the incoming
client connections to the proxy (`client'), and to the backend servers
(`server').

The following table describes the client and server attributes of the
`proxy.connection' object.

This table describes the client and server attributes of the
`proxy.connection' object.

Attribute              Description
`client.default_db'    Default database requested by the client
`client.username'      User name used to authenticate
`client.scrambled_password'The scrambled version of the password used to
                       authenticate
`client.dst.name'      The combined `address:port' of the Proxy port
                       used by this client (should match the
                       `--proxy-address' configuration parameter)
`client.dst.address'   The IP address of the of the Proxy port used by
                       this client
`client.dst.port'      The port number of the of the Proxy port used by
                       this client
`client.src.name'      The combined `address:port' of the client
                       (originating) TCP/IP endpoint
`client.src.address'   The IP address of the client (originating) TCP/IP
                       port
`client.src.port'      The port of the client (originating) TCP/IP
                       endpoint
`server.scramble_buffer'The scramble buffer used to scramble the password
`server.mysqld_version'The MySQL version number of the server
`server.thread_id'     The ID of the thread handling the connection to
                       the current server
`server.dst.name'      The combined `address:port' for the backend
                       server for the current connection (i.e. the
                       connection to the MySQL server)
`server.dst.address'   The address for the backend server
`server.dst.port'      The port for the backend server
`server.src.name'      The combined `address:port' for the TCP/IP
                       endpoint used by the Proxy to connect to the
                       backend server
`server.src.address'   The address of the endpoint for the proxy-side
                       connection to the MySQL server
`server.src.port'      The port of the endpoint for the proxy-side
                       connection to the MySQL server

*`proxy.global.backends'*

The `proxy.global.backends' table is partially writable and contains an
array of all the configured backend servers and the server metadata (IP
address, status, etc.). You can determine the array index of the
current connection using `proxy.connection["backend_ndx"]' which is the
index into this table of the backend server being used by the active
connection.

The attributes for each entry within the `proxy.global.backends' table
are shown in the following table.

This table describes the attributes for each entry within the
`proxy.global.backends' table.

Attribute              Description
`dst.name'             The combined `address:port' of the backend server.
`dst.address'          The IP address of the backend server.
`dst.port'             The port of the backend server.
`connected_clients'    The number of clients currently connected.
`state'                The status of the backend server. See *Note
                       mysql-proxy-scripting-structures-backend-states::.
`type'                 The type of the backend server. You can use this
                       to identify whether the backed was configured as
                       a standard read/write backend, or a read-only
                       backend. You can compare this value to the
                       `proxy.BACKEND_TYPE_RW' and
                       `proxy.BACKEND_TYPE_RO'.

*`proxy.queries'*

The `proxy.queries' object is a queue representing the list of queries
to be sent to the server. The queue is not populated automatically, but
if you do not explicitly populate the queue, queries are passed on to
the backend server verbatim. Also, if you do not populate the query
queue by hand, the `read_query_result()' function is not triggered.

The following functions are supported for populating the
`proxy.queries' object.

This table describes the functions that are supported for populating
the `proxy.queries' object.

Function               Description
`append(id,packet,[options])'Appends a query to the end of the query queue.
                       The `id' is an integer identifier that you can
                       use to recognize the query results when they are
                       returned by the server.  The packet should be a
                       properly formatted query packet.  The optional
                       `options' should be a table containing the
                       options specific to this packet.
`prepend(id,packet)'   Prepends a query to the query queue. The `id' is
                       an identifier that you can use to recognize the
                       query results when they are returned by the
                       server. The packet should be a properly formatted
                       query packet.
`reset()'              Empties the query queue.
`len()'                Returns the number of query packets in the queue.

For example, you could append a query packet to the `proxy.queries'
queue by using the `append()':

     proxy.queries:append(1,packet)

The optional third argument to `append()' should contain the options
for the packet. To have access to the result set through the
`read_query_result()' function, set the `resultset_is_needed' flag to
`true':

     proxy.queries:append( 1, packet, { resultset_is_needed = true } )

If that flag is `false' (the default), proxy will:

   * Send the result set to the client as soon as it is received

   * Reduce memory usage (because the result set is not stored
     internally for processing)

   * Reduce latency of returning results to the client

   * Pass data from server to client unaltered

The default mode is therefore quicker and useful if you only want to
monitor the queries sent, and the basic statistics.

To perform any kind of manipulation on the returned data, you must set
the flag to `true', which will:

   * Store the result set so that it can be processed.

   * Enable modification of the result set before it is returned to the
     client.

   * Enable you to discard the result set instead of returning it to
     the client.

*`proxy.response'*

The `proxy.response' structure is used when you want to return your own
MySQL response, instead of forwarding a packet that you have received a
backend server. The structure holds the response type information, an
optional error message, and the result set (rows/columns) to return.

The following table describes the attributes of the `proxy.response'
structure.

This table describes the attributes of the `proxy.response' structure.

Attribute              Description
`type'                 The type of the response. The type must be either
                       `MYSQLD_PACKET_OK' or `MYSQLD_PACKET_ERR'. If the
                       `MYSQLD_PACKET_ERR', you should set the value of
                       the `mysql.response.errmsg' with a suitable error
                       message.
`errmsg'               A string containing the error message that will
                       be returned to the client.
`resultset'            A structure containing the result set information
                       (columns and rows), identical to what would be
                       returned when returning a results from a *Note
                       `SELECT': select.  query.

When using `proxy.response' you either set `proxy.response.type' to
`proxy.MYSQLD_PACKET_OK' and then build `resultset' to contain the
results to return, or set `proxy.response.type' to
`proxy.MYSQLD_PACKET_ERR' and set the `proxy.response.errmsg' to a
string with the error message. To send the completed result set or error
message, you should return the `proxy.PROXY_SEND_RESULT' to trigger the
return of the packet information.

An example of this can be seen in the `tutorial-resultset.lua' script
within the MySQL Proxy package:

     if string.lower(command) == "show" and string.lower(option) == "querycounter" then
             ---
             -- proxy.PROXY_SEND_RESULT requires
             --
             -- proxy.response.type to be either
             -- * proxy.MYSQLD_PACKET_OK or
             -- * proxy.MYSQLD_PACKET_ERR
             --
             -- for proxy.MYSQLD_PACKET_OK you need a resultset
             -- * fields
             -- * rows
             --
             -- for proxy.MYSQLD_PACKET_ERR
             -- * errmsg
             proxy.response.type = proxy.MYSQLD_PACKET_OK
             proxy.response.resultset = {
                     fields = {
                             { type = proxy.MYSQL_TYPE_LONG, name = "global_query_counter", },
                             { type = proxy.MYSQL_TYPE_LONG, name = "query_counter", },
                     },
                     rows = {
                             { proxy.global.query_counter, query_counter }
                     }
             }

             -- we have our result, send it back
             return proxy.PROXY_SEND_RESULT
     elseif string.lower(command) == "show" and string.lower(option) == "myerror" then
             proxy.response.type = proxy.MYSQLD_PACKET_ERR
             proxy.response.errmsg = "my first error"

             return proxy.PROXY_SEND_RESULT

*`proxy.response.resultset'*

The `proxy.response.resultset' structure should be populated with the
rows and columns of data to return. The structure contains the
information about the entire result set, with the individual elements
of the data shown in the following table.

The following table describes the attributes of the
`proxy.response.resultset' structure.

This table describes the attributes of the `proxy.response.resultset'
structure.

Attribute              Description
`fields'               The definition of the columns being returned.
                       This should be a dictionary structure with the
                       `type' specifying the MySQL data type, and the
                       `name' specifying the column name.  Columns
                       should be listed in the order of the column data
                       that will be returned.
`flags'                A number of flags related to the result set.
                       Valid flags include `auto_commit' (whether an
                       automatic commit was triggered),
                       `no_good_index_used' (the query executed without
                       using an appropriate index), and `no_index_used'
                       (the query executed without using any index).
`rows'                 The actual row data. The information should be
                       returned as an array of arrays. Each inner array
                       should contain the column data, with the outer
                       array making up the entire result set.
`warning_count'        The number of warnings for this result set.
`affected_rows'        The number of rows affected by the original
                       statement.
`insert_id'            The last insert ID for an auto-incremented column
                       in a table.
`query_status'         The status of the query operation. You can use the
                       `MYSQLD_PACKET_OK' or `MYSQLD_PACKET_ERR'
                       constants to populate this parameter.

For an example showing how to use this structure, see `proxy.response'.

*Proxy Return State Constants*

The following constants are used internally by the proxy to specify the
response to send to the client or server. All constants are exposed as
values within the main `proxy' table.

This table describes proxy return state constants, which are used
internally by the proxy to specify the response to send to the client
or server.

Constant               Description
`PROXY_SEND_QUERY'     Causes the proxy to send the current contents of
                       the queries queue to the server.
`PROXY_SEND_RESULT'    Causes the proxy to send a result set back to the
                       client.
`PROXY_IGNORE_RESULT'  Causes the proxy to drop the result set (nothing
                       is returned to the client).

As constants, these entities are available without qualification in the
Lua scripts. For example, at the end of the `read_query_result()' you
might return `PROXY_IGNORE_RESULT:'

     return proxy.PROXY_IGNORE_RESULT

*Packet State Constants*

The following states describe the status of a network packet.  These
items are entries within the main `proxy' table.

This table describes packet state constants, which define the status of
a network packet.

Constant               Description
`MYSQLD_PACKET_OK'     The packet is OK
`MYSQLD_PACKET_ERR'    The packet contains error information
`MYSQLD_PACKET_RAW'    The packet contains raw data

*Backend State/Type Constants*

The following constants are used either to define the status or type of
the backend MySQL server to which the proxy is connected. These items
are entries within the main `proxy' table.

This table describes backend state/type constants, which are used to
define the status or type of the backend MySQL server to which the
proxy is connected.

Constant               Description
`BACKEND_STATE_UNKNOWN'The current status is unknown
`BACKEND_STATE_UP'     The backend is known to be up (available)
`BACKEND_STATE_DOWN'   The backend is known to be down (unavailable)
`BACKEND_TYPE_UNKNOWN' Backend type is unknown
`BACKEND_TYPE_RW'      Backend is available for read/write
`BACKEND_TYPE_RO'      Backend is available only for read-only use

*Server Command Constants*

The values described in the table below are used in the packets
exchanged between the client and server to identify the information in
the rest of the packet. These items are entries within the main `proxy'
table. The packet type is defined as the first character in the sent
packet. For example, when intercepting packets from the client to edit
or monitor a query, you would check that the first byte of the packet
was of type `proxy.COM_QUERY'.

This table describes server command constants, which are used in the
packets exchanged between the client and server to identify the
information in the rest of the packet.

Constant               Description
`COM_SLEEP'            Sleep
`COM_QUIT'             Quit
`COM_INIT_DB'          Initialize database
`COM_QUERY'            Query
`COM_FIELD_LIST'       Field List
`COM_CREATE_DB'        Create database
`COM_DROP_DB'          Drop database
`COM_REFRESH'          Refresh
`COM_SHUTDOWN'         Shutdown
`COM_STATISTICS'       Statistics
`COM_PROCESS_INFO'     Process List
`COM_CONNECT'          Connect
`COM_PROCESS_KILL'     Kill
`COM_DEBUG'            Debug
`COM_PING'             Ping
`COM_TIME'             Time
`COM_DELAYED_INSERT'   Delayed insert
`COM_CHANGE_USER'      Change user
`COM_BINLOG_DUMP'      Binlog dump
`COM_TABLE_DUMP'       Table dump
`COM_CONNECT_OUT'      Connect out
`COM_REGISTER_SLAVE'   Register slave
`COM_STMT_PREPARE'     Prepare server-side statement
`COM_STMT_EXECUTE'     Execute server-side statement
`COM_STMT_SEND_LONG_DATA'Long data
`COM_STMT_CLOSE'       Close server-side statement
`COM_STMT_RESET'       Reset statement
`COM_SET_OPTION'       Set option
`COM_STMT_FETCH'       Fetch statement
`COM_DAEMON'           Daemon (MySQL 5.1 only)
`COM_ERROR'            Error

*MySQL Type Constants*

These constants are used to identify the field types in the query
result data returned to clients from the result of a query. These items
are entries within the main `proxy' table.

This table describes MySQL type constants and associated field types.
The constants are used to identify the field types in the query result
data returned to clients from the result of a query.

Constant               Field Type
`MYSQL_TYPE_DECIMAL'   Decimal
`MYSQL_TYPE_NEWDECIMAL'Decimal (MySQL 5.0 or later)
`MYSQL_TYPE_TINY'      Tiny
`MYSQL_TYPE_SHORT'     Short
`MYSQL_TYPE_LONG'      Long
`MYSQL_TYPE_FLOAT'     Float
`MYSQL_TYPE_DOUBLE'    Double
`MYSQL_TYPE_NULL'      Null
`MYSQL_TYPE_TIMESTAMP' Timestamp
`MYSQL_TYPE_LONGLONG'  Long long
`MYSQL_TYPE_INT24'     Integer
`MYSQL_TYPE_DATE'      Date
`MYSQL_TYPE_TIME'      Time
`MYSQL_TYPE_DATETIME'  Datetime
`MYSQL_TYPE_YEAR'      Year
`MYSQL_TYPE_NEWDATE'   Date (MySQL 5.0 or later)
`MYSQL_TYPE_ENUM'      Enumeration
`MYSQL_TYPE_SET'       Set
`MYSQL_TYPE_TINY_BLOB' Tiny Blob
`MYSQL_TYPE_MEDIUM_BLOB'Medium Blob
`MYSQL_TYPE_LONG_BLOB' Long Blob
`MYSQL_TYPE_BLOB'      Blob
`MYSQL_TYPE_VAR_STRING'Varstring
`MYSQL_TYPE_STRING'    String
`MYSQL_TYPE_TINY'      Tiny (compatible with `MYSQL_TYPE_CHAR)'
`MYSQL_TYPE_ENUM'      Enumeration (compatible with
                       `MYSQL_TYPE_INTERVAL')
`MYSQL_TYPE_GEOMETRY'  Geometry
`MYSQL_TYPE_BIT'       Bit


File: manual.info,  Node: mysql-proxy-scripting-connect-server,  Next: mysql-proxy-scripting-read-handshake,  Prev: mysql-proxy-scripting-structures,  Up: mysql-proxy-scripting

15.7.4.3 Capturing a Connection with `connect_server()'
.......................................................

When the proxy accepts a connection from a MySQL client, the
`connect_server()' function is called.

There are no arguments to the function, but you can use and if
necessary manipulate the information in the `proxy.connection' table,
which is unique to each client session.

For example, if you have multiple backend servers, you can specify
which server that connection should use by setting the value of
`proxy.connection.backend_ndx' to a valid server number. The following
code chooses between two servers based on whether the current time in
minutes is odd or even:

     function connect_server()
             print("--> a client really wants to talk to a server")
             if (tonumber(os.date("%M")) % 2 == 0) then
                     proxy.connection.backend_ndx = 2
                     print("Choosing backend 2")
             else
                     proxy.connection.backend_ndx = 1
                     print("Choosing backend 1")
             end
             print("Using " .. proxy.global.backends[proxy.connection.backend_ndx].dst.name)
     end

This example also displays the IP address/port combination by accessing
the information from the internal `proxy.global.backends' table.


File: manual.info,  Node: mysql-proxy-scripting-read-handshake,  Next: mysql-proxy-scripting-read-auth,  Prev: mysql-proxy-scripting-connect-server,  Up: mysql-proxy-scripting

15.7.4.4 Examining the Handshake with `read_handshake()'
........................................................

Handshake information is sent by the server to the client after the
initial connection (through `connect_server()') has been made. The
handshake information contains details about the MySQL version, the ID
of the thread that will handle the connection information, and the IP
address of the client and server. This information is exposed through
the `proxy.connection' structure.

   * `proxy.connection.server.mysqld_version': The version of the MySQL
     server.

   * `proxy.connection.server.thread_id': The thread ID.

   * `proxy.connection.server.scramble_buffer': The password scramble
     buffer.

   * `proxy.connection.server.dst.name': The IP address of the server.

   * `proxy.connection.client.src.name': The IP address of the client.

For example, you can print out the handshake data and refuse clients by
IP address with the following function:

     function read_handshake()
             print("<-- let's send him some information about us")
             print("    mysqld-version: " .. proxy.connection.server.mysqld_version)
             print("    thread-id     : " .. proxy.connection.server.thread_id)
             print("    scramble-buf  : " .. string.format("%q",proxy.connection.server.scramble_buffer))
             print("    server-addr   : " .. proxy.connection.server.dst.name)
             print("    client-addr   : " .. proxy.connection.client.dst.name)

             if not proxy.connection.client.src.name:match("^127.0.0.1:") then
                     proxy.response.type = proxy.MYSQLD_PACKET_ERR
                     proxy.response.errmsg = "only local connects are allowed"

                     print("we don't like this client");

                     return proxy.PROXY_SEND_RESULT
             end
     end

Note that you must return an error packet to the client by using
`proxy.PROXY_SEND_RESULT'.


File: manual.info,  Node: mysql-proxy-scripting-read-auth,  Next: mysql-proxy-scripting-read-auth-result,  Prev: mysql-proxy-scripting-read-handshake,  Up: mysql-proxy-scripting

15.7.4.5 Examining the Authentication Credentials with `read_auth()'
....................................................................

The `read_auth()' function is triggered when an authentication
handshake is initiated by the client. In the execution sequence,
`read_auth()' occurs immediately after `read_handshake()', so the
server selection has already been made, but the connection and
authorization information has not yet been provided to the backend
server.

You can obtain the authentication information by examining the
`proxy.connection.client' structure. For more information, see
`proxy.connection'.

For example, you can print the user name and password supplied during
authorization using:

     function read_auth()
             print("    username      : " .. proxy.connection.client.username)
             print("    password      : " .. string.format("%q", proxy.connection.client.scrambled_password))
     end

You can interrupt the authentication process within this function and
return an error packet back to the client by constructing a new packet
and returning `proxy.PROXY_SEND_RESULT':

     proxy.response.type = proxy.MYSQLD_PACKET_ERR
     proxy.response.errmsg = "Logins are not allowed"
     return proxy.PROXY_SEND_RESULT


File: manual.info,  Node: mysql-proxy-scripting-read-auth-result,  Next: mysql-proxy-scripting-read-query,  Prev: mysql-proxy-scripting-read-auth,  Up: mysql-proxy-scripting

15.7.4.6 Accessing Authentication Information with `read_auth_result()'
.......................................................................

The return packet from the server during authentication is captured by
`read_auth_result()'. The only argument to this function is the
authentication packet returned by the server. As the packet is a raw
MySQL network protocol packet, you must access the first byte to
identify the packet type and contents. The `MYSQLD_PACKET_ERR' and
`MYSQLD_PACKET_OK' constants can be used to identify whether the
authentication was successful:

     function read_auth_result(auth)
             local state = auth.packet:byte()

             if state == proxy.MYSQLD_PACKET_OK then
                     print("<-- auth ok");
             elseif state == proxy.MYSQLD_PACKET_ERR then
                     print("<-- auth failed");
             else
                     print("<-- auth ... don't know: " .. string.format("%q", auth.packet));
             end
     end

If a long-password capable client tries to authenticate to a server
that supports long passwords, but the user password provided is
actually short, `read_auth_result()' will be called twice. The first
time, `auth.packet:byte()' will equal 254, indicating that the client
should try again using the old password protocol. The second time time
`read_auth_result()/' is called, `auth.packet:byte()' will indicate
whether the authentication actually succeeded.


File: manual.info,  Node: mysql-proxy-scripting-read-query,  Next: mysql-proxy-scripting-read-query-result,  Prev: mysql-proxy-scripting-read-auth-result,  Up: mysql-proxy-scripting

15.7.4.7 Manipulating Queries with `read_query()'
.................................................

The `read_query()' function is called once for each query submitted by
the client and accepts a single argument, the query packet that was
provided. To access the content of the packet, you must parse the
packet contents manually.

For example, you can intercept a query packet and print out the
contents using the following function definition:

     function read_query( packet )
             if packet:byte() == proxy.COM_QUERY then
                     print("we got a normal query: " .. packet:sub(2))
             end
     end

This example checks the first byte of the packet to determine the type.
If the type is `COM_QUERY' (see *Note
mysql-proxy-scripting-structures-command-constants::), we extract the
query from the packet and print it. The structure of the packet type
supplied is important. In the case of a `COM_QUERY' packet, the
remaining contents of the packet are the text of the query string. In
this example, no changes have been made to the query or the list of
queries that will ultimately be sent to the MySQL server.

To modify a query, or add new queries, you must populate the query
queue (`proxy.queries'), then execute the queries that you have placed
into the queue. If you do not modify the original query or the queue,
the query received from the client is sent to the MySQL server verbatim.

When adding queries to the queue, you should follow these guidelines:

   * The packets inserted into the queue must be valid query packets.
     For each packet, you must set the initial byte to the packet type.
     If you are appending a query, you can append the query statement
     to the rest of the packet.

   * Once you add a query to the queue, the queue is used as the source
     for queries sent to the server. If you add a query to the queue to
     add more information, you must also add the original query to the
     queue or it will not be executed.

   * Once the queue has been populated, you must set the return value
     from `read_query()' to indicate whether the query queue should be
     sent to the server.

   * When you add queries to the queue, you should add an ID. The ID
     you specify is returned with the result set so that you identify
     each query and corresponding result set. The ID has no other
     purpose than as an identifier for correlating the query and result
     set. When operating in a passive mode, during profiling for
     example, you identify the original query and the corresponding
     result set so that the results expected by the client can be
     returned correctly.

   * Unless your client is designed to cope with more result sets than
     queries, you should ensure that the number of queries from the
     client match the number of results sets returned to the client.
     Using the unique ID and removing result sets you inserted will
     help.

Normally, the `read_query()' and `read_query_result()' function are
used in conjunction with each other to inject additional queries and
remove the additional result sets. However, `read_query_result()' is
only called if you populate the query queue within `read_query()'.


File: manual.info,  Node: mysql-proxy-scripting-read-query-result,  Prev: mysql-proxy-scripting-read-query,  Up: mysql-proxy-scripting

15.7.4.8 Manipulating Results with `read_query_result()'
........................................................

The `read_query_result()' is called for each result set returned by the
server only if you have manually injected queries into the query queue.
If you have not manipulated the query queue, this function is not
called. The function supports a single argument, the result packet,
which provides a number of properties:

   * `id': The ID of the result set, which corresponds to the ID that
     was set when the query packet was submitted to the server when
     using `append(id)' on the query queue. You must have set the
     `resultset_is_needed' flag to `append' to intercept the result set
     before it is returned to the client. See *Note
     mysql-proxy-scripting-structures-queries::.

   * `query': The text of the original query.

   * `query_time': The number of microseconds required to receive the
     first row of a result set since the query was sent to the server.

   * `response_time': The number of microseconds required to receive
     the last row of the result set since the query was sent to the
     server.

   * `resultset': The content of the result set data.

By accessing the result information from the MySQL server, you can
extract the results that match the queries that you injected, return
different result sets (for example, from a modified query), and even
create your own result sets.

The following Lua script, for example, will output the query, followed
by the query time and response time (that is, the time to execute the
query and the time to return the data for the query) for each query
sent to the server:

     function read_query( packet )
             if packet:byte() == proxy.COM_QUERY then
                     print("we got a normal query: " .. packet:sub(2))

                     proxy.queries:append(1, packet )

                     return proxy.PROXY_SEND_QUERY
             end
     end

     function read_query_result(inj)
             print("query-time: " .. (inj.query_time / 1000) .. "ms")
             print("response-time: " .. (inj.response_time / 1000) .. "ms")
     end

You can access the rows of returned results from the result set by
accessing the `rows' property of the `resultset' property of the result
that is exposed through `read_query_result()'. For example, you can
iterate over the results showing the first column from each row using
this Lua fragment:

     for row in inj.resultset.rows do
             print("injected query returned: " .. row[1])
     end

Just like `read_query()', `read_query_result()' can return different
values for each result according to the result returned. If you have
injected additional queries into the query queue, for example, remove
the results returned from those additional queries and return only the
results from the query originally submitted by the client.

The following example injects additional `SELECT NOW()' statements into
the query queue, giving them a different ID to the ID of the original
query. Within `read_query_result()', if the ID for the injected queries
is identified, we display the result row, and return the
`proxy.PROXY_IGNORE_RESULT' from the function so that the result is not
returned to the client. If the result is from any other query, we print
out the query time information for the query and return the default,
which passes on the result set unchanged. We could also have explicitly
returned `proxy.PROXY_IGNORE_RESULT' to the MySQL client.

     function read_query( packet )
             if packet:byte() == proxy.COM_QUERY then
                     proxy.queries:append(2, string.char(proxy.COM_QUERY) .. "SELECT NOW()", {resultset_is_needed = true} )
                     proxy.queries:append(1, packet, {resultset_is_needed = true})
                     proxy.queries:append(2, string.char(proxy.COM_QUERY) .. "SELECT NOW()", {resultset_is_needed = true} )

                     return proxy.PROXY_SEND_QUERY
             end
     end

     function read_query_result(inj)
             if inj.id == 2 then
                     for row in inj.resultset.rows do
                             print("injected query returned: " .. row[1])
                     end
                     return proxy.PROXY_IGNORE_RESULT
             else
                     print("query-time: " .. (inj.query_time / 1000) .. "ms")
                     print("response-time: " .. (inj.response_time / 1000) .. "ms")
             end
     end

For further examples, see *Note mysql-proxy-using::.


File: manual.info,  Node: mysql-proxy-using,  Next: mysql-proxy-faq,  Prev: mysql-proxy-scripting,  Up: mysql-proxy

15.7.5 Using MySQL Proxy
------------------------

* Menu:

* mysql-proxy-using-admin::      Using the Administration Interface

There are a number of different ways to use MySQL Proxy. At the most
basic level, you can allow MySQL Proxy to pass queries from clients to
a single server. To use MySQL Proxy in this mode, you just have to
specify on the command line the backend server to which the proxy
should connect:

     shell> mysql-proxy --proxy-backend-addresses=sakila:3306

If you specify multiple backend MySQL servers, the proxy connects each
client to each server in a round-robin fashion. Suppose that you have
two MySQL servers, A and B. The first client to connect is connected to
server A, the second to server B, the third to server A. For example:

     shell> mysql-proxy \
          --proxy-backend-addresses=narcissus:3306 \
          --proxy-backend-addresses=nostromo:3306

When you specify multiple servers in this way, the proxy automatically
identifies when a MySQL server has become unavailable and marks it
accordingly. New connections are automatically attached to a server
that is available, and a warning is reported to the standard output from
*Note `mysql-proxy': mysql-proxy.:

     network-mysqld.c.367: connect(nostromo:3306) failed: Connection refused
     network-mysqld-proxy.c.2405: connecting to backend (nostromo:3306) failed, marking it as down for ...

Lua scripts enable a finer level of control, both over the connections
and their distribution and how queries and result sets are processed.
When using an Lua script, you must specify the name of the script on
the command line using the `--proxy-lua-script' option:

     shell> mysql-proxy --proxy-lua-script=mc.lua --proxy-backend-addresses=sakila:3306

When you specify a script, the script is not executed until a
connection is made. This means that faults with the script are not
raised until the script is executed. Script faults will not affect the
distribution of queries to backend MySQL servers.

*Note*:

Because a script is not read until the connection is made, you can
modify the contents of the Lua script file while the proxy is still
running and the modified script is automatically used for the next
connection. This ensures that MySQL Proxy remains available because it
need not be restarted for the changes to take effect.


File: manual.info,  Node: mysql-proxy-using-admin,  Prev: mysql-proxy-using,  Up: mysql-proxy-using

15.7.5.1 Using the Administration Interface
...........................................

The *Note `mysql-proxy': mysql-proxy. administration interface can be
accessed using any MySQL client using the standard protocols.  You can
use the administration interface to gain information about the proxy
server as a whole - standard connections to the proxy are isolated to
operate as if you were connected directly to the backend MySQL server.

In *Note `mysql-proxy': mysql-proxy. 0.8.0 and earlier, a rudimentary
interface was built into the proxy. In later versions this was replaced
so that you must specify an administration script to be used when users
connect to the administration interface.

To use the administration interface, specify the user name and password
required to connect to the admin service, using the `--admin-username'
and `--admin-password' options.  You must also specify the Lua script
to be used as the interface to the administration service by using the
`admin-lua-script' script option to point to a Lua script.

For example, you can create a basic interface to the internal
components of the *Note `mysql-proxy': mysql-proxy. system using the
following script, written by Diego Medina:

     --[[

        Copyright 2008, 2010, Oracle and/or its affiliates. All rights reserved.

        This program is free software; you can redistribute it and/or modify
        it under the terms of the GNU General Public License as published by
        the Free Software Foundation; version 2 of the License.

        This program is distributed in the hope that it will be useful,
        but WITHOUT ANY WARRANTY; without even the implied warranty of
        MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
        GNU General Public License for more details.

        You should have received a copy of the GNU General Public License
        along with this program; if not, write to the Free Software
        Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

     --]]

     -- admin.lua

     --[[

         See http://www.chriscalender.com/?p=41
         (Thanks to Chris Calender)
         See http://datacharmer.blogspot.com/2009/01/mysql-proxy-is-back.html
         (Thanks Giuseppe Maxia)

     --]]

     function set_error(errmsg)
         proxy.response = {
             type = proxy.MYSQLD_PACKET_ERR,
             errmsg = errmsg or "error"
         }
     end

     function read_query(packet)
         if packet:byte() ~= proxy.COM_QUERY then
             set_error("[admin] we only handle text-based queries (COM_QUERY)")
             return proxy.PROXY_SEND_RESULT
         end

         local query = packet:sub(2)
         local rows = { }
         local fields = { }

         -- try to match the string up to the first non-alphanum
         local f_s, f_e, command = string.find(packet, "^%s*(%w+)", 2)
         local option

         if f_e then
                 -- if that match, take the next sub-string as option
                 f_s, f_e, option = string.find(packet, "^%s+(%w+)", f_e + 1)
         end

         -- we got our commands, execute it
         if command == "show" and option == "querycounter" then
                 ---
                 -- proxy.PROXY_SEND_RESULT requires
                 --
                 -- proxy.response.type to be either
                 -- * proxy.MYSQLD_PACKET_OK or
                 -- * proxy.MYSQLD_PACKET_ERR
                 --
                 -- for proxy.MYSQLD_PACKET_OK you need a resultset
                 -- * fields
                 -- * rows
                 --
                 -- for proxy.MYSQLD_PACKET_ERR
                 -- * errmsg
                 proxy.response.type = proxy.MYSQLD_PACKET_OK
                 proxy.response.resultset = {
                         fields = {
                                 { type = proxy.MYSQL_TYPE_LONG, name = "query_counter", },
                         },
                         rows = {
                                 { proxy.global.query_counter }
                         }
                 }

                 -- we have our result, send it back
                 return proxy.PROXY_SEND_RESULT
         elseif command == "show" and option == "myerror" then
                 proxy.response.type = proxy.MYSQLD_PACKET_ERR
                 proxy.response.errmsg = "my first error"

                 return proxy.PROXY_SEND_RESULT

         elseif string.sub(packet, 2):lower() == 'select help' then
                 return show_process_help()

         elseif string.sub(packet, 2):lower() == 'show proxy processlist' then
                 return show_process_table()

         elseif query == "SELECT * FROM backends" then
             fields = {
                 { name = "backend_ndx",
                   type = proxy.MYSQL_TYPE_LONG },

                 { name = "address",
                   type = proxy.MYSQL_TYPE_STRING },
                 { name = "state",
                   type = proxy.MYSQL_TYPE_STRING },
                 { name = "type",
                   type = proxy.MYSQL_TYPE_STRING },
             }

             for i = 1, #proxy.global.backends do
                 local b = proxy.global.backends[i]

                 rows[#rows + 1] = {
                     i, b.dst.name, b.state, b.type
                 }
             end
         else
             set_error()
             return proxy.PROXY_SEND_RESULT
         end

         proxy.response = {
             type = proxy.MYSQLD_PACKET_OK,
             resultset = {
                 fields = fields,
                 rows = rows
             }
         }
         return proxy.PROXY_SEND_RESULT
     end

     function make_dataset (header, dataset)
         proxy.response.type = proxy.MYSQLD_PACKET_OK

         proxy.response.resultset = {
             fields = {},
             rows = {}
         }
         for i,v in pairs (header) do
             table.insert(proxy.response.resultset.fields, {type = proxy.MYSQL_TYPE_STRING, name = v})
         end
         for i,v in pairs (dataset) do
             table.insert(proxy.response.resultset.rows, v )
         end
         return proxy.PROXY_SEND_RESULT
     end

     function show_process_table()
         local dataset = {}
         local header = { 'Id', 'IP Address', 'Time' }
         local rows = {}
         for t_i, t_v in pairs (proxy.global.process) do
             for s_i, s_v in pairs ( t_v ) do
                 table.insert(rows, { t_i, s_v.ip, os.date('%c',s_v.ts) })
             end
         end
         return make_dataset(header,rows)
     end

     function show_process_help()
         local dataset = {}
         local header = { 'command',  'description' }
         local rows = {
             {'SELECT HELP',                 'This command.'},
             {'SHOW PROXY PROCESSLIST',      'Show all connections and their true IP Address.'},
         }
         return make_dataset(header,rows)
     end

     function dump_process_table()
         proxy.global.initialize_process_table()
         print('current contents of process table')
         for t_i, t_v in pairs (proxy.global.process) do
             print ('session id: ', t_i)
             for s_i, s_v in pairs ( t_v ) do
                 print ( '\t', s_i, s_v.ip, s_v.ts )
             end
         end
         print ('---END PROCESS TABLE---')
     end

     --[[    Help

     we use a simple string-match to split commands are word-boundaries

     mysql> show querycounter

     is split into
     command = "show"
     option  = "querycounter"

     spaces are ignored, the case has to be as is.

     mysql> show myerror

     returns a error-packet

     --]]

The script works in combination with a main proxy script,
`reporter.lua':

     --[[

        Copyright 2008, 2010, Oracle and/or its affiliates. All rights reserved.

        This program is free software; you can redistribute it and/or modify
        it under the terms of the GNU General Public License as published by
        the Free Software Foundation; version 2 of the License.

        This program is distributed in the hope that it will be useful,
        but WITHOUT ANY WARRANTY; without even the implied warranty of
        MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
        GNU General Public License for more details.

        You should have received a copy of the GNU General Public License
        along with this program; if not, write to the Free Software
        Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

     --]]

     -- reporter.lua

     --[[

         See http://www.chriscalender.com/?p=41
         (Thanks to Chris Calender)
         See http://datacharmer.blogspot.com/2009/01/mysql-proxy-is-back.html
         (Thanks Giuseppe Maxia)

     --]]

     proxy.global.query_counter = proxy.global.query_counter or 0

     function proxy.global.initialize_process_table()
         if proxy.global.process == nil then
             proxy.global.process = {}
         end
         if proxy.global.process[proxy.connection.server.thread_id] == nil then
             proxy.global.process[proxy.connection.server.thread_id] = {}
         end
     end

     function read_auth_result( auth )
         local state = auth.packet:byte()
         if state == proxy.MYSQLD_PACKET_OK then
             proxy.global.initialize_process_table()
             table.insert( proxy.global.process[proxy.connection.server.thread_id],
                 { ip = proxy.connection.client.src.name, ts = os.time() } )
         end
     end

     function disconnect_client()
         local connection_id = proxy.connection.server.thread_id
         if connection_id then
             -- client has disconnected, set this to nil
             proxy.global.process[connection_id] = nil
         end
     end

     ---
     -- read_query() can return a resultset
     --
     -- You can use read_query() to return a result-set.
     --
     -- @param packet the mysql-packet sent by the client
     --
     -- @return
     --   * nothing to pass on the packet as is,
     --   * proxy.PROXY_SEND_QUERY to send the queries from the proxy.queries queue
     --   * proxy.PROXY_SEND_RESULT to send your own result-set
     --
     function read_query( packet )
             -- a new query came in in this connection
             -- using proxy.global.* to make it available to the admin plugin
             proxy.global.query_counter = proxy.global.query_counter + 1

     end

To use the script, save the first script to a file (`admin.lua' in the
following example) and the other to `reporter.lua', then run *Note
`mysql-proxy': mysql-proxy. specifying the admin script and a backend
MySQL server:

     shell> mysql-proxy --admin-lua-script=admin.lua --admin-password=password \ »
          --admin-username=root --proxy-backend-addresses=127.0.0.1:3306 -proxy-lua-script=reporter.lua

In a different window, connect to the MySQL server through the proxy:

     shell> mysql --user=root --password=password --port=4040
     Welcome to the MySQL monitor.  Commands end with ; or \g.
     Your MySQL connection id is 1798669
     Server version: 5.0.70-log Gentoo Linux mysql-5.0.70-r1

     Type 'help;' or '\h' for help. Type '\c' to clear the buffer.

     mysql>

In another different window, connect to the *Note `mysql-proxy':
mysql-proxy. admin service using the specified user name and password:

     shell> mysql --user=root --password=password --port=4041 --host=localhost
     Welcome to the MySQL monitor.  Commands end with ; or \g.
     Your MySQL connection id is 1
     Server version: 5.0.99-agent-admin

     Type 'help;' or '\h' for help. Type '\c' to clear the buffer.

     mysql>

To monitor the status of the proxy, ask for a list of the current
active processes:

     mysql> show proxy processlist;
     +---------+---------------------+--------------------------+
     | Id      | IP Address          | Time                     |
     +---------+---------------------+--------------------------+
     | 1798669 | 192.168.0.112:52592 | Wed Jan 20 16:58:00 2010 |
     +---------+---------------------+--------------------------+
     1 row in set (0.00 sec)

     mysql>

For more information on the example, see MySQL Proxy Admin Example
(http://fmpwizard.blogspot.com/2009/04/how-do-i-use-mysql-proxy-admin-plugin.html).


File: manual.info,  Node: mysql-proxy-faq,  Prev: mysql-proxy-using,  Up: mysql-proxy

15.7.6 MySQL Proxy FAQ
----------------------

*Questions*
   * 16.7.6.1: In load balancing, how can I separate reads from writes?

   * 16.7.6.2: How do I use a socket with MySQL Proxy? Proxy change logs
     mention that support for UNIX sockets has been added.

   * 16.7.6.3: Can I use MySQL Proxy with all versions of MySQL?

   * 16.7.6.4: Can I run MySQL Proxy as a daemon?

   * 16.7.6.5: Do proxy applications run on a separate server? If not,
     what is the overhead incurred by Proxy on the DB server side?

   * 16.7.6.6: With load balancing, what happens to transactions? Are
     all queries sent to the same server?

   * 16.7.6.7: Is it possible to use MySQL Proxy with updating a Lucene
     index (or Solr) by making TCP calls to that server to update?

   * 16.7.6.8: Is the system context switch expensive, how much
     overhead does the Lua script add?

   * 16.7.6.9: How much latency does a proxy add to a connection?

   * 16.7.6.10: Do you have to make one large script and call it at
     proxy startup, can I change scripts without stopping and restarting
     (interrupting) the proxy?

   * 16.7.6.11: If MySQL Proxy has to live on same machine as MySQL,
     are there any tuning considerations to ensure both perform
     optimally?

   * 16.7.6.12: I currently use SQL Relay for efficient connection
     pooling with a number of Apache processes connecting to a MySQL
     server. Can MySQL Proxy currently accomplish this? My goal is to
     minimize connection latency while keeping temporary tables
     available.

   * 16.7.6.13: Are these reserved function names (for example,
     `error_result()') that get automatically called?

   * 16.7.6.14: As the script is re-read by MySQL Proxy, does it cache
     this or is it looking at the file system with each request?

   * 16.7.6.15: Given that there is a `connect_server()' function, can
     a Lua script link up with multiple servers?

   * 16.7.6.16: Is the MySQL Proxy an API?

   * 16.7.6.17: The global namespace variable example with quotas does
     not persist after a reboot, is that correct?

   * 16.7.6.18: Can MySQL Proxy handle SSL connections?

   * 16.7.6.19: Could MySQL Proxy be used to capture passwords?

   * 16.7.6.20: Are there tools for isolating problems? How can someone
     figure out whether a problem is in the client, the database, or the
     proxy?

   * 16.7.6.21: Is MySQL Proxy similar to what is provided by Java
     connection pools?

   * 16.7.6.22: So authentication with connection pooling has to be
     done at every connection? What is the authentication latency?

   * 16.7.6.23: If you have multiple databases on the same box, can you
     use proxy to connect to databases on default port 3306?

   * 16.7.6.24: What about caching the authorization information so
     clients connecting are given back-end connections that were
     established with identical authorization information, thus saving
     a few more round trips?

   * 16.7.6.25: Is there any big web site using MySQL Proxy? For what
     purpose and what transaction rate have they achieved?

   * 16.7.6.26: How does MySQL Proxy compare to DBSlayer?

   * 16.7.6.27: I tried using MySQL Proxy without any Lua script to try
     a round-robin type load balancing. In this case, if the first
     database in the list is down, MySQL Proxy would not connect the
     client to the second database in the list.

   * 16.7.6.28: Is it `safe' to use `LuaSocket' with proxy scripts?

   * 16.7.6.29: How different is MySQL Proxy from DBCP (Database
     connection pooling) for Apache in terms of connection pooling?

   * 16.7.6.30: MySQL Proxy can handle about 5000 connections, what is
     the limit on a MySQL server?

   * 16.7.6.31: Would the Java-only connection pooling solution work for
     multiple web servers? With this, I would assume that you can pool
     across many web servers at once?

*Questions and Answers* *16.7.6.1: ** In load balancing, how can I
separate reads from writes?  *

There is no automatic separation of queries that perform reads or
writes to the different backend servers. However, you can specify to
*Note `mysql-proxy': mysql-proxy. that one or more of the `backend'
MySQL servers are read only.

     shell> mysql-proxy \
     --proxy-backend-addresses=10.0.1.2:3306 \
     --proxy-read-only-backend-addresses=10.0.1.3:3306 &

*16.7.6.2: ** How do I use a socket with MySQL Proxy? Proxy change logs
mention that support for UNIX sockets has been added.  *

Specify the path to the socket:

     --proxy-backend-addresses=/PATH/TO/SOCKET

*16.7.6.3: ** Can I use MySQL Proxy with all versions of MySQL?  *

MySQL Proxy is designed to work with MySQL 5.0 or higher, and supports
the MySQL network protocol for 5.0 and higher.

*16.7.6.4: ** Can I run MySQL Proxy as a daemon?  *

Use the `--daemon' option. To keep track of the process ID, the daemon
can be started with the `--pid-file=file' option to save the PID to a
known file name. On version 0.5.x, the Proxy cannot be started natively
as a daemon.

*16.7.6.5: ** Do proxy applications run on a separate server? If not,
what is the overhead incurred by Proxy on the DB server side?  *

You can run the proxy on the application server, on its own box, or on
the DB-server depending on the use case.

*16.7.6.6: ** With load balancing, what happens to transactions? Are all
queries sent to the same server?  *

Without any special customization the whole connection is sent to the
same server. That keeps the whole connection state intact.

*16.7.6.7: ** Is it possible to use MySQL Proxy with updating a Lucene
index (or Solr) by making TCP calls to that server to update?  *

Yes, but it is not advised for now.

*16.7.6.8: ** Is the system context switch expensive, how much overhead
does the Lua script add?  *

Lua is fast and the overhead should be small enough for most
applications. The raw packet overhead is around 400 microseconds.

*16.7.6.9: ** How much latency does a proxy add to a connection?  *

In the range of 400 microseconds per request.

*16.7.6.10: ** Do you have to make one large script and call it at proxy
startup, can I change scripts without stopping and restarting
(interrupting) the proxy?  *

You can just change the script and the proxy will reload it when a
client connects.

*16.7.6.11: ** If MySQL Proxy has to live on same machine as MySQL, are
there any tuning considerations to ensure both perform optimally?  *

MySQL Proxy can live on any box: application, database, or its own box.
MySQL Proxy uses comparatively little CPU or RAM, with negligible
additional requirements or overhead.

*16.7.6.12: ** I currently use SQL Relay for efficient connection
pooling with a number of Apache processes connecting to a MySQL server.
Can MySQL Proxy currently accomplish this? My goal is to minimize
connection latency while keeping temporary tables available.  *

Yes.

*16.7.6.13: ** Are these reserved function names (for example,
`error_result()') that get automatically called?  *

Only functions and values starting with `proxy.*' are provided by the
proxy. All others are user provided.

*16.7.6.14: ** As the script is re-read by MySQL Proxy, does it cache
this or is it looking at the file system with each request?  *

It looks for the script at client-connect and reads it if it has
changed, otherwise it uses the cached version.

*16.7.6.15: ** Given that there is a `connect_server()' function, can a
Lua script link up with multiple servers?  *

MySQL Proxy provides some tutorials in the source package; one is
`examples/tutorial-keepalive.lua'.

*16.7.6.16: ** Is the MySQL Proxy an API?  *

No, MySQL Proxy is an application that forwards packets from a client
to a server using the MySQL network protocol. The MySQL Proxy provides
a API allowing you to change its behavior.

*16.7.6.17: ** The global namespace variable example with quotas does
not persist after a reboot, is that correct?  *

Yes. If you restart the proxy, you lose the results, unless you save
them in a file.

*16.7.6.18: ** Can MySQL Proxy handle SSL connections?  *

No, being the man-in-the-middle, Proxy cannot handle encrypted sessions
because it cannot share the SSL information.

*16.7.6.19: ** Could MySQL Proxy be used to capture passwords?  *

The MySQL network protocol does not allow passwords to be sent in
cleartext, all you could capture is the encrypted version.

*16.7.6.20: ** Are there tools for isolating problems? How can someone
figure out whether a problem is in the client, the database, or the
proxy?  *

You can set a debug script in the proxy, which is an exceptionally good
tool for this purpose. You can see very clearly which component is
causing the problem, if you set the right breakpoints.

*16.7.6.21: ** Is MySQL Proxy similar to what is provided by Java
connection pools?  *

Yes and no. Java connection pools are specific to Java applications,
MySQL Proxy works with any client API that talks the MySQL network
protocol. Also, connection pools do not provide any functionality for
intelligently examining the network packets and modifying the contents.

*16.7.6.22: ** So authentication with connection pooling has to be done
at every connection? What is the authentication latency?  *

You can skip the round-trip and use the connection as it was added to
the pool. As long as the application cleans up the temporary tables it
used. The overhead is (as always) around 400 microseconds.

*16.7.6.23: ** If you have multiple databases on the same box, can you
use proxy to connect to databases on default port 3306?  *

Yes, MySQL Proxy can listen on any port, provided that none of the
MySQL servers are listening on the same port.

*16.7.6.24: ** What about caching the authorization information so
clients connecting are given back-end connections that were established
with identical authorization information, thus saving a few more round
trips?  *

There is an `--proxy-pool-no-change-user' option that provides this
functionality.

*16.7.6.25: ** Is there any big web site using MySQL Proxy? For what
purpose and what transaction rate have they achieved?  *

Yes, gaiaonline (http://gaiaonline.com/).  They have tested MySQL Proxy
and seen it handle 2400 queries per second through the proxy.

*16.7.6.26: ** How does MySQL Proxy compare to DBSlayer?  *

DBSlayer is a REST->MySQL tool, MySQL Proxy is transparent to your
application. No change to the application is needed.

*16.7.6.27: ** I tried using MySQL Proxy without any Lua script to try a
round-robin type load balancing. In this case, if the first database in
the list is down, MySQL Proxy would not connect the client to the
second database in the list.  *

This issue is fixed in version 0.7.0.

*16.7.6.28: ** Is it `safe' to use `LuaSocket' with proxy scripts?  *

You can, but it is not advised because it may block.

*16.7.6.29: ** How different is MySQL Proxy from DBCP (Database
connection pooling) for Apache in terms of connection pooling?  *

Connection Pooling is just one use case of the MySQL Proxy. You can use
it for a lot more and it works in cases where you cannot use DBCP (for
example, if you do not have Java).

*16.7.6.30: ** MySQL Proxy can handle about 5000 connections, what is
the limit on a MySQL server?  *

The server limit is given by the value of the `max_connections' system
variable. The default value is version dependent.

*16.7.6.31: ** Would the Java-only connection pooling solution work for
multiple web servers? With this, I would assume that you can pool
across many web servers at once?  *

Yes. But you can also start one proxy on each application server to get
a similar behavior as you have it already.


File: manual.info,  Node: replication,  Next: mysql-cluster,  Prev: ha-overview,  Up: Top

16 Replication
**************

* Menu:

* replication-configuration::    Replication Configuration
* replication-implementation::   Replication Implementation
* replication-solutions::        Replication Solutions
* replication-notes::            Replication Notes and Tips

Replication enables data from one MySQL database server (the master) to
be replicated to one or more MySQL database servers (the slaves).
Replication is asynchronous by default - slaves need not to connected
permanently to receive updates from the master. This means that updates
can occur over long-distance connections and even over temporary or
intermittent connections such as a dial-up service.  Depending on the
configuration, you can replicate all databases, selected databases, or
even selected tables within a database.

For answers to some questions often asked by those who are new to MySQL
Replication, see *Note faqs-replication::.

The target uses for replication in MySQL include:

   * Scale-out solutions - spreading the load among multiple slaves to
     improve performance. In this environment, all writes and updates
     must take place on the master server. Reads, however, may take
     place on one or more slaves. This model can improve the
     performance of writes (since the master is dedicated to updates),
     while dramatically increasing read speed across an increasing
     number of slaves.

   * Data security - because data is replicated to the slave, and the
     slave can pause the replication process, it is possible to run
     backup services on the slave without corrupting the corresponding
     master data.

   * Analytics - live data can be created on the master, while the
     analysis of the information can take place on the slave without
     affecting the performance of the master.

   * Long-distance data distribution - if a branch office would like to
     work with a copy of your main data, you can use replication to
     create a local copy of the data for their use without requiring
     permanent access to the master.

Replication in MySQL features support for one-way, asynchronous
replication, in which one server acts as the master, while one or more
other servers act as slaves. This is in contrast to the _synchronous_
replication which is a characteristic of MySQL Cluster (see *Note
mysql-cluster::). In MySQL 5.5, an interface to semisynchronous
replication is supported in addition to the built-in asynchronous
replication. With semisynchronous replication, a commit performed on
the master side blocks before returning to the session that performed
the transaction until at least one slave acknowledges that it has
received and logged the events for the transaction. See *Note
replication-semisync::

There are a number of solutions available for setting up replication
between two servers, but the best method to use depends on the presence
of data and the engine types you are using. For more information on the
available options, see *Note replication-howto::.

There are two core types of replication format, Statement Based
Replication (SBR), which replicates entire SQL statements, and Row
Based Replication (RBR), which replicates only the changed rows. You
may also use a third variety, Mixed Based Replication (MBR). For more
information on the different replication formats, see *Note
replication-formats::. In MySQL 5.5, statement-based format is the
default.

Replication is controlled through a number of different options and
variables. These control the core operation of the replication,
timeouts, and the databases and filters that can be applied on
databases and tables. For more information on the available options,
see *Note replication-options::.

You can use replication to solve a number of different problems,
including problems with performance, supporting the backup of different
databases, and as part of a larger solution to alleviate system
failures. For information on how to address these issues, see *Note
replication-solutions::.

For notes and tips on how different data types and statements are
treated during replication, including details of replication features,
version compatibility, upgrades, and problems and their resolution,
including an FAQ, see *Note replication-notes::.

For detailed information on the implementation of replication, how
replication works, the process and contents of the binary log,
background threads and the rules used to decide how statements are
recorded and replication, see *Note replication-implementation::.


File: manual.info,  Node: replication-configuration,  Next: replication-implementation,  Prev: replication,  Up: replication

16.1 Replication Configuration
==============================

* Menu:

* replication-howto::            How to Set Up Replication
* replication-formats::          Replication Formats
* replication-options::          Replication and Binary Logging Options and Variables
* replication-administration::   Common Replication Administration Tasks

Replication between servers in MySQL is based on the binary logging
mechanism. The MySQL instance operating as the master (the source of
the database changes) writes updates and changes as `events' to the
binary log. The information in the binary log is stored in different
logging formats according to the database changes being recorded.
Slaves are configured to read the binary log from the master and to
execute the events in the binary log on the slave's local database.

The master is `dumb' in this scenario. Once binary logging has been
enabled, all statements are recorded in the binary log. Each slave
receives a copy of the entire contents of the binary log. It is the
responsibility of the slave to decide which statements in the binary
log should be executed; you cannot configure the master to log only
certain events. If you do not specify otherwise, all events in the
master binary log are executed on the slave. If required, you can
configure the slave to process only events that apply to particular
databases or tables.

Each slave keeps a record of the binary log coordinates: The file name
and position within the file that it has read and processed from the
master. This means that multiple slaves can be connected to the master
and executing different parts of the same binary log.  Because the
slaves control this process, individual slaves can be connected and
disconnected from the server without affecting the master's operation.
Also, because each slave remembers the position within the binary log,
it is possible for slaves to be disconnected, reconnect and then `catch
up' by continuing from the recorded position.

Both the master and each slave must be configured with a unique ID
(using the `server-id' option). In addition, each slave must be
configured with information about the master host name, log file name,
and position within that file.  These details can be controlled from
within a MySQL session using the *Note `CHANGE MASTER TO':
change-master-to. statement on the slave. The details are stored within
the slave's `master.info' file.

This section describes the setup and configuration required for a
replication environment, including step-by-step instructions for
creating a new replication environment. The major components of this
section are:

   * For a guide to setting up two or more servers for replication,
     *Note replication-howto::, deals with the configuration of the
     systems and provides methods for copying data between the master
     and slaves.

   * Events in the binary log are recorded using a number of formats.
     These are referred to as statement-based replication (SBR) or
     row-based replication (RBR). A third type, mixed-format
     replication (MIXED), uses SBR or RBR replication automatically to
     take advantage of the benefits of both SBR and RBR formats when
     appropriate. The different formats are discussed in *Note
     replication-formats::.

   * Detailed information on the different configuration options and
     variables that apply to replication is provided in *Note
     replication-options::.

   * Once started, the replication process should require little
     administration or monitoring. However, for advice on common tasks
     that you may want to execute, see *Note
     replication-administration::.


File: manual.info,  Node: replication-howto,  Next: replication-formats,  Prev: replication-configuration,  Up: replication-configuration

16.1.1 How to Set Up Replication
--------------------------------

* Menu:

* replication-howto-masterbaseconfig::  Setting the Replication Master Configuration
* replication-howto-slavebaseconfig::  Setting the Replication Slave Configuration
* replication-howto-repuser::    Creating a User for Replication
* replication-howto-masterstatus::  Obtaining the Replication Master Binary Log Coordinates
* replication-howto-mysqldump::  Creating a Data Snapshot Using `mysqldump'
* replication-howto-rawdata::    Creating a Data Snapshot Using Raw Data Files
* replication-howto-newservers::  Setting Up Replication with New Master and Slaves
* replication-howto-existingdata::  Setting Up Replication with Existing Data
* replication-howto-additionalslaves::  Introducing Additional Slaves to an Existing Replication Environment
* replication-howto-slaveinit::  Setting the Master Configuration on the Slave

This section describes how to set up complete replication of a MySQL
server. There are a number of different methods for setting up
replication, and the exact method to use depends on how you are setting
up replication, and whether you already have data within your master
database.

There are some generic tasks that are common to all replication setups:

   * On the master, you must enable binary logging and configure a
     unique server ID. This might require a server restart. See *Note
     replication-howto-masterbaseconfig::.

   * On each slave that you want to connect to the master, you must
     configure a unique server ID. This might require a server restart.
     See *Note replication-howto-slavebaseconfig::.

   * You may want to create a separate user that will be used by your
     slaves to authenticate with the master to read the binary log for
     replication. The step is optional. See *Note
     replication-howto-repuser::.

   * Before creating a data snapshot or starting the replication
     process, you should record the position of the binary log on the
     master. You will need this information when configuring the slave
     so that the slave knows where within the binary log to start
     executing events. See *Note replication-howto-masterstatus::.

   * If you already have data on your master and you want to use it to
     synchronize your slave, you will need to create a data snapshot.
     You can create a snapshot using *Note `mysqldump': mysqldump. (see
     *Note replication-howto-mysqldump::) or by copying the data files
     directly (see *Note replication-howto-rawdata::).

   * You will need to configure the slave with settings for connecting
     to the master, such as the host name, login credentials, and
     binary log file name and position. See *Note
     replication-howto-slaveinit::.

Once you have configured the basic options, you will need to follow the
instructions for your replication setup. A number of alternatives are
provided:

   * If you are establishing a new MySQL master and one or more slaves,
     you need only set up the configuration, as you have no data to
     exchange. For guidance on setting up replication in this
     situation, see *Note replication-howto-newservers::.

   * If you are already running a MySQL server, and therefore already
     have data that must be transferred to your slaves before
     replication starts, have not previously configured the binary log
     and are able to shut down your MySQL server for a short period
     during the process, see *Note replication-howto-existingdata::.

   * If you are adding slaves to an existing replication environment,
     you can set up the slaves without affecting the master. See *Note
     replication-howto-additionalslaves::.

If you will be administering MySQL replication servers, we suggest that
you read this entire chapter through and try all statements mentioned
in *Note replication-master-sql::, and *Note replication-slave-sql::.
You should also familiarize yourself with the replication startup
options described in *Note replication-options::.

*Note*:

Note that certain steps within the setup process require the `SUPER'
privilege. If you do not have this privilege, it might not be possible
to enable replication.


File: manual.info,  Node: replication-howto-masterbaseconfig,  Next: replication-howto-slavebaseconfig,  Prev: replication-howto,  Up: replication-howto

16.1.1.1 Setting the Replication Master Configuration
.....................................................

On a replication master, you must enable binary logging and establish a
unique server ID. If this has not already been done, this part of
master setup requires a server restart.

Binary logging _must_ be enabled on the master because the binary log
is the basis for sending data changes from the master to its slaves. If
binary logging is not enabled, replication will not be possible.

Each server within a replication group must be configured with a unique
server ID. This ID is used to identify individual servers within the
group, and must be a positive integer between 1 and (2^32)-1. How you
organize and select the numbers is entirely up to you.

To configure the binary log and server ID options, you will need to
shut down your MySQL server and edit the `my.cnf' or `my.ini' file.
Add the following options to the configuration file within the
`[mysqld]' section. If these options already exist, but are commented
out, uncomment the options and alter them according to your needs. For
example, to enable binary logging using a log file name prefix of
`mysql-bin', and configure a server ID of 1, use these lines:

     [mysqld]
     log-bin=mysql-bin
     server-id=1

After making the changes, restart the server.

*Note*:

If you omit `server-id' (or set it explicitly to its default value of
0), a master refuses connections from all slaves.

*Note*:

For the greatest possible durability and consistency in a replication
setup using `InnoDB' with transactions, you should use
`innodb_flush_log_at_trx_commit=1' and `sync_binlog=1' in the master
`my.cnf' file.

*Note*:

Ensure that the `skip-networking' option is not enabled on your
replication master. If networking has been disabled, your slave will
not able to communicate with the master and replication will fail.


File: manual.info,  Node: replication-howto-slavebaseconfig,  Next: replication-howto-repuser,  Prev: replication-howto-masterbaseconfig,  Up: replication-howto

16.1.1.2 Setting the Replication Slave Configuration
....................................................

On a replication slave, you must establish a unique server ID.  If this
has not already been done, this part of slave setup requires a server
restart.

If the slave server ID is not already set, or the current value
conflicts with the value that you have chosen for the master server,
you should shut down your slave server and edit the configuration to
specify a unique server ID. For example:

     [mysqld]
     server-id=2

After making the changes, restart the server.

If you are setting up multiple slaves, each one must have a unique
`server-id' value that differs from that of the master and from each of
the other slaves. Think of `server-id' values as something similar to
IP addresses: These IDs uniquely identify each server instance in the
community of replication partners.

*Note*:

If you omit `server-id' (or set it explicitly to its default value of
0), a slave refuses to connect to a master.

You do not have to enable binary logging on the slave for replication
to be enabled. However, if you enable binary logging on the slave, you
can use the binary log for data backups and crash recovery on the
slave, and also use the slave as part of a more complex replication
topology (for example, where the slave acts as a master to other
slaves).


File: manual.info,  Node: replication-howto-repuser,  Next: replication-howto-masterstatus,  Prev: replication-howto-slavebaseconfig,  Up: replication-howto

16.1.1.3 Creating a User for Replication
........................................

Each slave must connect to the master using a MySQL user name and
password, so there must be a user account on the master that the slave
can use to connect. Any account can be used for this operation,
providing it has been granted the `REPLICATION SLAVE' privilege. You
may wish to create a different account for each slave, or connect to
the master using the same account for each slave.

You need not create an account specifically for replication.  However,
you should be aware that the user name and password will be stored in
plain text within the `master.info' file (see *Note
slave-logs-status::). Therefore, you may want to create a separate
account that has privileges only for the replication process, to
minimize the possibility of compromise to other accounts.

To create a new account, use *Note `CREATE USER': create-user. To grant
this account the privileges required for replication, use the *Note
`GRANT': grant.  statement. If you create an account solely for the
purposes of replication, that account needs only the `REPLICATION
SLAVE' privilege. For example, to set up a new user, `repl', that can
connect for replication from any host within the `mydomain.com' domain,
issue these statements on the master:

     mysql> CREATE USER 'repl'@'%.mydomain.com' IDENTIFIED BY 'slavepass';
     mysql> GRANT REPLICATION SLAVE ON *.* TO 'repl'@'%.mydomain.com';

See *Note account-management-sql::, for more information on statements
for manipulation of user accounts.


File: manual.info,  Node: replication-howto-masterstatus,  Next: replication-howto-mysqldump,  Prev: replication-howto-repuser,  Up: replication-howto

16.1.1.4 Obtaining the Replication Master Binary Log Coordinates
................................................................

To configure replication on the slave you must determine the master's
current coordinates within its binary log. You will need this
information so that when the slave starts the replication process, it
is able to start processing events from the binary log at the correct
point.

If you have existing data on your master that you want to synchronize
on your slaves before starting the replication process, you must stop
processing statements on the master, and then obtain its current binary
log coordinates and dump its data, before permitting the master to
continue executing statements. If you do not stop the execution of
statements, the data dump and the master status information that you
use will not match and you will end up with inconsistent or corrupted
databases on the slaves.

To obtain the master binary log coordinates, follow these steps:

  1. Start a session on the master by connecting to it with the
     command-line client, and flush all tables and block write
     statements by executing the *Note `FLUSH TABLES WITH READ LOCK':
     flush. statement:

          mysql> FLUSH TABLES WITH READ LOCK;

     For `InnoDB' tables, note that *Note `FLUSH TABLES WITH READ
     LOCK': flush. also blocks *Note `COMMIT': commit. operations.

     *Warning*:

     Leave the client from which you issued the *Note `FLUSH TABLES':
     flush. statement running so that the read lock remains in effect.
     If you exit the client, the lock is released.

  2. In a different session on the master, use the *Note `SHOW MASTER
     STATUS': show-master-status. statement to determine the current
     binary log file name and position:

          mysql > SHOW MASTER STATUS;
          +------------------+----------+--------------+------------------+
          | File             | Position | Binlog_Do_DB | Binlog_Ignore_DB |
          +------------------+----------+--------------+------------------+
          | mysql-bin.000003 | 73       | test         | manual,mysql     |
          +------------------+----------+--------------+------------------+

     The `File' column shows the name of the log file and `Position'
     shows the position within the file. In this example, the binary
     log file is `mysql-bin.000003' and the position is 73.  Record
     these values. You need them later when you are setting up the
     slave. They represent the replication coordinates at which the
     slave should begin processing new updates from the master.

     If the master has been running previously without binary logging
     enabled, the log file name and position values displayed by *Note
     `SHOW MASTER STATUS': show-master-status. or *Note `mysqldump
     --master-data': mysqldump. will be empty. In that case, the values
     that you need to use later when specifying the slave's log file
     and position are the empty string (`''') and `4'.

You now have the information you need to enable the slave to start
reading from the binary log in the correct place to start replication.

If you have existing data that needs be to synchronized with the slave
before you start replication, leave the client running so that the lock
remains in place and then proceed to *Note
replication-howto-mysqldump::, or *Note replication-howto-rawdata::.
The idea here is to prevent any further changes so that the data copied
to the slaves is in synchrony with the master.

If you are setting up a brand new master and slave replication group,
you can exit the first session to release the read lock.


File: manual.info,  Node: replication-howto-mysqldump,  Next: replication-howto-rawdata,  Prev: replication-howto-masterstatus,  Up: replication-howto

16.1.1.5 Creating a Data Snapshot Using `mysqldump'
...................................................

One way to create a snapshot of the data in an existing master database
is to use the *Note `mysqldump': mysqldump. tool. Once the data dump
has been completed, you then import this data into the slave before
starting the replication process.

To obtain a snapshot of the data using *Note `mysqldump': mysqldump.:

  1. If you have not already locked the tables on the server to prevent
     statements that update data from executing:

     Start a session on the server by connecting to it with the
     command-line client, and flush all tables and block write
     statements by executing the *Note `FLUSH TABLES WITH READ LOCK':
     flush. statement:

          mysql> FLUSH TABLES WITH READ LOCK;

     Remember to use *Note `SHOW MASTER STATUS': show-master-status.
     and record the binary log details for use when starting up the
     slave. The point in time of your snapshot and the binary log
     position must match. See *Note replication-howto-masterstatus::.

  2. In another session, use *Note `mysqldump': mysqldump. to create a
     dump either of all the databases you want to replicate, or of
     selected individual databases. For example:

          shell> mysqldump --all-databases --lock-all-tables >dbdump.db

     An alternative to using a bare dump, is to use the `--master-data'
     option, which automatically appends the *Note `CHANGE MASTER TO':
     change-master-to.  statement required on the slave to start the
     replication process.

          shell> mysqldump --all-databases --master-data >dbdump.db

  3. In the client where you acquired the read lock, release the lock:

          mysql> UNLOCK TABLES;

     Alternatively, exit the first session to release the read lock.

When choosing databases to include in the dump, remember to filter out
databases on each slave that you do not want to include in the
replication process.

Either to copy the dump file to the slave, or use the file from the
master when connecting remotely to the slave to import the data.


File: manual.info,  Node: replication-howto-rawdata,  Next: replication-howto-newservers,  Prev: replication-howto-mysqldump,  Up: replication-howto

16.1.1.6 Creating a Data Snapshot Using Raw Data Files
......................................................

If your database is large, copying the raw data files can be more
efficient than using *Note `mysqldump': mysqldump. and importing the
file on each slave. This technique skips the overhead of updating
indexes as the `INSERT' statements are replayed.

Using this method with tables in storage engines with complex caching
or logging algorithms requires extra steps to produce a perfect `point
in time' snapshot: the initial copy command might leave out cache
information and logging updates, even if you have acquired a global
read lock. How the storage engine responds to this depends on its crash
recovery abilities.

This method also does not work reliably if the master and slave have
different values for `ft_stopword_file', `ft_min_word_len', or
`ft_max_word_len' and you are copying tables having full-text indexes.

If you use *Note `InnoDB': innodb-storage-engine. tables, you can use
the `mysqlbackup' command from the MySQL Enterprise Backup component to
produce a consistent snapshot.  This command records the log name and
offset corresponding to the snapshot to be later used on the slave.
MySQL Enterprise Backup is a commercial product that is included as
part of a MySQL Enterprise subscription. See *Note
mysql-enterprise-backup:: for detailed information.

Otherwise, use the cold backup technique to obtain a reliable binary
snapshot of `InnoDB' tables: copy all data files after doing a slow
shutdown of the MySQL Server.

To create a raw data snapshot of `MyISAM' tables, you can use standard
copy tools such as `cp' or `copy', a remote copy tool such as `scp' or
`rsync', an archiving tool such as `zip' or `tar', or a file system
snapshot tool such as `dump', providing that your MySQL data files
exist on a single file system. If you are replicating only certain
databases, copy only those files that relate to those tables. (For
`InnoDB', all tables in all databases are stored in the system
tablespace files, unless you have the `innodb_file_per_table' option
enabled.)

You might want to specifically exclude the following files from your
archive:

   * Files relating to the `mysql' database.

   * The `master.info' file.

   * The master's binary log files.

   * Any relay log files.

To get the most consistent results with a raw data snapshot, shut down
the master server during the process, as follows:

  1. Acquire a read lock and get the master's status. See *Note
     replication-howto-masterstatus::.

  2. In a separate session, shut down the master server:

          shell> mysqladmin shutdown

  3. Make a copy of the MySQL data files. The following examples show
     common ways to do this. You need to choose only one of them:

          shell> tar cf /TMP/DB.TAR ./DATA
          shell> zip -r /TMP/DB.ZIP ./DATA
          shell> rsync --recursive ./DATA /TMP/DBDATA

  4. Restart the master server.

If you are not using `InnoDB' tables, you can get a snapshot of the
system from a master without shutting down the server as described in
the following steps:

  1. Acquire a read lock and get the master's status. See *Note
     replication-howto-masterstatus::.

  2. Make a copy of the MySQL data files. The following examples show
     common ways to do this. You need to choose only one of them:

          shell> tar cf /TMP/DB.TAR ./DATA
          shell> zip -r /TMP/DB.ZIP ./DATA
          shell> rsync --recursive ./DATA /TMP/DBDATA

  3. In the client where you acquired the read lock, release the lock:

          mysql> UNLOCK TABLES;

Once you have created the archive or copy of the database, copy the
files to each slave before starting the slave replication process.


File: manual.info,  Node: replication-howto-newservers,  Next: replication-howto-existingdata,  Prev: replication-howto-rawdata,  Up: replication-howto

16.1.1.7 Setting Up Replication with New Master and Slaves
..........................................................

The easiest and most straightforward method for setting up replication
is to use new master and slave servers.

You can also use this method if you are setting up new servers but have
an existing dump of the databases from a different server that you want
to load into your replication configuration. By loading the data into a
new master, the data will be automatically replicated to the slaves.

To set up replication between a new master and slave:

  1. Configure the MySQL master with the necessary configuration
     properties. See *Note replication-howto-masterbaseconfig::.

  2. Start up the MySQL master.

  3. Set up a user. See *Note replication-howto-repuser::.

  4. Obtain the master status information. See *Note
     replication-howto-masterstatus::.

  5. On the master, release the read lock:

          mysql> UNLOCK TABLES;

  6. On the slave, edit the MySQL configuration. See *Note
     replication-howto-slavebaseconfig::.

  7. Start up the MySQL slave.

  8. Execute a *Note `CHANGE MASTER TO': change-master-to.  statement
     to set the master replication server configuration. See *Note
     replication-howto-slaveinit::.

Perform the slave setup steps on each slave.

Because there is no data to load or exchange on a new server
configuration you do not need to copy or import any information.

If you are setting up a new replication environment using the data from
a different existing database server, you will now need to run the dump
file generated from that server on the new master. The database updates
will automatically be propagated to the slaves:

     shell> mysql -h master < fulldb.dump


File: manual.info,  Node: replication-howto-existingdata,  Next: replication-howto-additionalslaves,  Prev: replication-howto-newservers,  Up: replication-howto

16.1.1.8 Setting Up Replication with Existing Data
..................................................

When setting up replication with existing data, you will need to decide
how best to get the data from the master to the slave before starting
the replication service.

The basic process for setting up replication with existing data is as
follows:

  1. With the MySQL master running, create a user to be used by the
     slave when connecting to the master during replication.  See *Note
     replication-howto-repuser::.

  2. If you have not already configured the `server-id' and enabled
     binary logging on the master server, you will need to shut it down
     to configure these options. See *Note
     replication-howto-masterbaseconfig::.

     If you have to shut down your master server, this is a good
     opportunity to take a snapshot of its databases. You should obtain
     the master status (see *Note replication-howto-masterstatus::)
     before taking down the master, updating the configuration and
     taking a snapshot. For information on how to create a snapshot
     using raw data files, see *Note replication-howto-rawdata::.

  3. If your master server is already correctly configured, obtain its
     status (see *Note replication-howto-masterstatus::) and then use
     *Note `mysqldump': mysqldump. to take a snapshot (see *Note
     replication-howto-mysqldump::) or take a raw snapshot of the live
     server using the guide in *Note replication-howto-rawdata::.

  4. Update the configuration of the slave. See *Note
     replication-howto-slavebaseconfig::.

  5. The next step depends on how you created the snapshot of data on
     the master.

     If you used *Note `mysqldump': mysqldump.:

       1. Start the slave, using the `--skip-slave-start' option so
          that replication does not start.

       2. Import the dump file:

               shell> mysql < fulldb.dump

     If you created a snapshot using the raw data files:

       1. Extract the data files into your slave data directory.  For
          example:

               shell> tar xvf dbdump.tar

          You may need to set permissions and ownership on the files so
          that the slave server can access and modify them.

       2. Start the slave, using the `--skip-slave-start' option so
          that replication does not start.

  6. Configure the slave with the replication coordinates from the
     master. This tells the slave the binary log file and position
     within the file where replication needs to start.  Also, configure
     the slave with the login credentials and host name of the master.
     For more information on the *Note `CHANGE MASTER TO':
     change-master-to. statement required, see *Note
     replication-howto-slaveinit::.

  7. Start the slave threads:

          mysql> START SLAVE;

After you have performed this procedure, the slave should connect to
the master and catch up on any updates that have occurred since the
snapshot was taken.

If you have forgotten to set the `server-id' option for the master,
slaves cannot connect to it.

If you have forgotten to set the `server-id' option for the slave, you
get the following error in the slave's error log:

     Warning: You should set server-id to a non-0 value if master_host
     is set; we will force server id to 2, but this MySQL server will
     not act as a slave.

You also find error messages in the slave's error log if it is not able
to replicate for any other reason.

Once a slave is replicating, you can find in its data directory one
file named `master.info' and another named `relay-log.info'. The slave
uses these two files to keep track of how much of the master's binary
log it has processed. Do _not_ remove or edit these files unless you
know exactly what you are doing and fully understand the implications.
Even in that case, it is preferred that you use the *Note `CHANGE
MASTER TO': change-master-to.  statement to change replication
parameters. The slave will use the values specified in the statement to
update the status files automatically.

*Note*:

The content of `master.info' overrides some of the server options
specified on the command line or in `my.cnf'. See *Note
replication-options::, for more details.

A single snapshot of the master suffices for multiple slaves. To set up
additional slaves, use the same master snapshot and follow the slave
portion of the procedure just described.


File: manual.info,  Node: replication-howto-additionalslaves,  Next: replication-howto-slaveinit,  Prev: replication-howto-existingdata,  Up: replication-howto

16.1.1.9 Introducing Additional Slaves to an Existing Replication Environment
.............................................................................

To add another slave to an existing replication configuration, you can
do so without stopping the master. Instead, set up the new slave by
making a copy of an existing slave, except that you configure the new
slave with a different `server-id' value.

To duplicate an existing slave:

  1. Shut down the existing slave:

          shell> mysqladmin shutdown

  2. Copy the data directory from the existing slave to the new slave.
     You can do this by creating an archive using `tar' or `WinZip', or
     by performing a direct copy using a tool such as `cp' or `rsync'.
     Ensure that you also copy the log files and relay log files.

     A common problem that is encountered when adding new replication
     slaves is that the new slave fails with a series of warning and
     error messages like these:

          071118 16:44:10 [Warning] Neither --relay-log nor --relay-log-index were used; so
          replication may break when this MySQL server acts as a slave and has his hostname
          changed!! Please use '--relay-log=NEW_SLAVE_HOSTNAME-relay-bin' to avoid this problem.
          `071118 16:44:10 [ERROR] Failed to open the relay log './OLD_SLAVE_HOSTNAME-relay-bin.003525'
          (relay_log_pos 22940879)'
          071118 16:44:10 `[ERROR] Could not find target log during relay log initialization'
          071118 16:44:10 `[ERROR] Failed to initialize the master info structure'

     This is due to the fact that, if the `--relay-log' option is not
     specified, the relay log files contain the host name as part of
     their file names. (This is also true of the relay log index file
     if the `--relay-log-index' option is not used. See *Note
     replication-options::, for more information about these options.)

     To avoid this problem, use the same value for `--relay-log' on the
     new slave that was used on the existing slave. (If this option was
     not set explicitly on the existing slave, use
     `EXISTING_SLAVE_HOSTNAME-relay-bin'.)  If this is not feasible,
     copy the existing slave's relay log index file to the new slave
     and set the `--relay-log-index' option on the new slave to match
     what was used on the existing slave.  (If this option was not set
     explicitly on the existing slave, use
     `EXISTING_SLAVE_HOSTNAME-relay-bin.index'.)  Alternatively--if you
     have already tried to start the new slave (after following the
     remaining steps in this section) and have encountered errors like
     those described previously--then perform the following steps:

       1. If you have not already done so, issue a *Note `STOP SLAVE':
          stop-slave. on the new slave.

          If you have already started the existing slave again, issue a
          *Note `STOP SLAVE': stop-slave. on the existing slave as well.

       2. Copy the contents of the existing slave's relay log index
          file into the new slave's relay log index file, making sure
          to overwrite any content already in the file.

       3. Proceed with the remaining steps in this section.

  3. Copy the `master.info' and `relay-log.info' files from the existing
     slave to the new slave if they were not located in the data
     directory. These files hold the current log coordinates for the
     master's binary log and the slave's relay log.

  4. Start the existing slave.

  5. On the new slave, edit the configuration and give the new slave a
     unique `server-id' not used by the master or any of the existing
     slaves.

  6. Start the new slave. The slave will use the information in its
     `master.info' file to start the replication process.


File: manual.info,  Node: replication-howto-slaveinit,  Prev: replication-howto-additionalslaves,  Up: replication-howto

16.1.1.10 Setting the Master Configuration on the Slave
.......................................................

To set up the slave to communicate with the master for replication, you
must tell the slave the necessary connection information. To do this,
execute the following statement on the slave, replacing the option
values with the actual values relevant to your system:

     mysql> CHANGE MASTER TO
         ->     MASTER_HOST='MASTER_HOST_NAME',
         ->     MASTER_USER='REPLICATION_USER_NAME',
         ->     MASTER_PASSWORD='REPLICATION_PASSWORD',
         ->     MASTER_LOG_FILE='RECORDED_LOG_FILE_NAME',
         ->     MASTER_LOG_POS=RECORDED_LOG_POSITION;

*Note*:

Replication cannot use Unix socket files. You must be able to connect
to the master MySQL server using TCP/IP.

The *Note `CHANGE MASTER TO': change-master-to. statement has other
options as well. For example, it is possible to set up secure
replication using SSL. For a full list of options, and information
about the maximum permissible length for the string-valued options, see
*Note change-master-to::.


File: manual.info,  Node: replication-formats,  Next: replication-options,  Prev: replication-howto,  Up: replication-configuration

16.1.2 Replication Formats
--------------------------

* Menu:

* replication-sbr-rbr::          Advantages and Disadvantages of Statement-Based and Row-Based Replication
* replication-rbr-usage::        Usage of Row-Based Logging and Replication
* replication-rbr-safe-unsafe::  Determination of Safe and Unsafe Statements in Binary Logging

Replication works because events written to the binary log are read
from the master and then processed on the slave. The events are
recorded within the binary log in different formats according to the
type of event. The different replication formats used correspond to the
binary logging format used when the events were recorded in the
master's binary log. The correlation between binary logging formats and
the terms used during replication are:

   * Replication capabilities in MySQL originally were based on
     propagation of SQL statements from master to slave. This is called
     _statement-based replication_ (often abbreviated as _SBR_), which
     corresponds to the standard statement-based binary logging format.
     In older versions of MySQL (5.1.4 and earlier), binary logging and
     replication used this format exclusively.

   * Row-based binary logging logs changes in individual table rows.
     When used with MySQL replication, this is known as _row-based
     replication_ (often abbreviated as _RBR_). In row-based
     replication, the master writes _events_ to the binary log that
     indicate how individual table rows are changed.

   * The server can change the binary logging format in real time
     according to the type of event using _mixed-format logging_.

     When the mixed format is in effect, statement-based logging is
     used by default, but automatically switches to row-based logging
     in particular cases as described later. Replication using the
     mixed format is often referred to as _mixed-based replication_ or
     _mixed-format replication_. For more information, see *Note
     binary-log-mixed::.

In MySQL 5.5, statement-based format is the default.

MySQL Cluster

The default binary logging format in all MySQL Cluster NDB 7.2
releases, beginning with MySQL Cluster NDB 7.2.1, is `STATEMENT'. (This
is a change from previous versions of MySQL Cluster.) You should note
that MySQL Cluster Replication always uses row-based replication, and
that the *Note `NDB': mysql-cluster. storage engine is incompatible
with statement-based replication. This means that you must manually set
the format to `ROW' prior to enabling MySQL Cluster Replication. See
*Note mysql-cluster-replication-general::, for more information.

When using `MIXED' format, the binary logging format is determined in
part by the storage engine being used and the statement being executed.
For more information on mixed-format logging and the rules governing
the support of different logging formats, see *Note binary-log-mixed::.

The logging format in a running MySQL server is controlled by setting
the `binlog_format' server system variable. This variable can be set
with session or global scope. The rules governing when and how the new
setting takes effect are the same as for other MySQL server system
variables--setting the variable for the current session lasts only
until the end of that session, and the change is not visible to other
sessions; setting the variable globally requires a restart of the
server to take effect. For more information, see *Note set-statement::.

There are conditions under which you cannot change the binary logging
format at runtime or doing so causes replication to fail.  See *Note
binary-log-setting::.

You must have the `SUPER' privilege to set either the global or session
`binlog_format' value.

The statement-based and row-based replication formats have different
issues and limitations. For a comparison of their relative advantages
and disadvantages, see *Note replication-sbr-rbr::.

With statement-based replication, you may encounter issues with
replicating stored routines or triggers. You can avoid these issues by
using row-based replication instead. For more information, see *Note
stored-programs-logging::.


File: manual.info,  Node: replication-sbr-rbr,  Next: replication-rbr-usage,  Prev: replication-formats,  Up: replication-formats

16.1.2.1 Advantages and Disadvantages of Statement-Based and Row-Based Replication
..................................................................................

Each binary logging format has advantages and disadvantages. For most
users, the mixed replication format should provide the best combination
of data integrity and performance. If, however, you want to take
advantage of the features specific to the statement-based or row-based
replication format when performing certain tasks, you can use the
information in this section, which provides a summary of their relative
advantages and disadvantages, to determine which is best for your needs.

   * Advantages of statement-based replication

   * Disadvantages of statement-based replication

   * Advantages of row-based replication

   * Disadvantages of row-based replication

* Advantages of statement-based replication *

   * Proven technology that has existed in MySQL since 3.23.

   * Less data written to log files. When updates or deletes affect
     many rows, this results in _much_ less storage space required for
     log files. This also means that taking and restoring from backups
     can be accomplished more quickly.

   * Log files contain all statements that made any changes, so they
     can be used to audit the database.

* Disadvantages of statement-based replication *

   * Statements that are unsafe for SBR

     Not all statements which modify data (such as *Note `INSERT':
     insert.  *Note `DELETE': delete, *Note `UPDATE': update, and
     `REPLACE' statements) can be replicated using statement-based
     replication. Any nondeterministic behavior is difficult to
     replicate when using statement-based replication. Examples of such
     DML (Data Modification Language) statements include the following:

        * A statement that depends on a UDF or stored program that is
          nondeterministic, since the value returned by such a UDF or
          stored program or depends on factors other than the
          parameters supplied to it. (Row-based replication, however,
          simply replicates the value returned by the UDF or stored
          program, so its effect on table rows and data is the same on
          both the master and slave.) See *Note
          replication-features-invoked::, for more information.

        * *Note `DELETE': delete. and *Note `UPDATE': update.
          statements that use a `LIMIT' clause without an `ORDER BY'
          are nondeterministic. See *Note replication-features-limit::.

        * Statements using any of the following functions cannot be
          replicated properly using statement-based replication:

             * `LOAD_FILE()'

             * `UUID()', `UUID_SHORT()'

             * `USER()'

             * `FOUND_ROWS()'

             * `SYSDATE()' (unless both the master and the slave are
               started with the `--sysdate-is-now' option)

             * `GET_LOCK()'

             * `IS_FREE_LOCK()'

             * `IS_USED_LOCK()'

             * `MASTER_POS_WAIT()'

             * `RAND()'

             * `RELEASE_LOCK()'

             * `SLEEP()'

             * `VERSION()'

          However, all other functions are replicated correctly using
          statement-based replication, including `NOW()' and so forth.

          For more information, see *Note
          replication-features-functions::.

     Statements that cannot be replicated correctly using
     statement-based replication are logged with a warning like the one
     shown here:

          090213 16:58:54 [Warning] Statement is not safe to log in statement format.

     A similar warning is also issued to the client in such cases. The
     client can display it using *Note `SHOW WARNINGS': show-warnings.

   * *Note `INSERT ... SELECT': insert. requires a greater number of
     row-level locks than with row-based replication.

   * *Note `UPDATE': update. statements that require a table scan
     (because no index is used in the `WHERE' clause) must lock a
     greater number of rows than with row-based replication.

   * For *Note `InnoDB': innodb-storage-engine.: An *Note `INSERT':
     insert. statement that uses `AUTO_INCREMENT' blocks other
     nonconflicting *Note `INSERT': insert.  statements.

   * For complex statements, the statement must be evaluated and
     executed on the slave before the rows are updated or inserted.
     With row-based replication, the slave only has to modify the
     affected rows, not execute the full statement.

   * If there is an error in evaluation on the slave, particularly when
     executing complex statements, statement-based replication may
     slowly increase the margin of error across the affected rows over
     time. See *Note replication-features-slaveerrors::.

   * Stored functions execute with the same `NOW()' value as the calling
     statement. However, this is not true of stored procedures.

   * Deterministic UDFs must be applied on the slaves.

   * Table definitions must be (nearly) identical on master and slave.
     See *Note replication-features-differing-tables::, for more
     information.

* Advantages of row-based replication *

   * All changes can be replicated. This is the safest form of
     replication.

     The `mysql' database is not replicated. The `mysql' database is
     instead seen as a node-specific database. Row-based replication is
     not supported on tables in this database. Instead, statements that
     would normally update this information--such as *Note `GRANT':
     grant, *Note `REVOKE': revoke. and the manipulation of triggers,
     stored routines (including stored procedures), and views--are all
     replicated to slaves using statement-based replication.

     For statements such as *Note `CREATE TABLE ... SELECT':
     create-table, a `CREATE' statement is generated from the table
     definition and replicated using statement-based format, while the
     row insertions are replicated using row-based format.

   * The technology is the same as in most other database management
     systems; knowledge about other systems transfers to MySQL.

   * Fewer row locks are required on the master, which thus achieves
     higher concurrency, for the following types of statements:

        * *Note `INSERT ... SELECT': insert-select.

        * *Note `INSERT': insert. statements with `AUTO_INCREMENT'

        * *Note `UPDATE': update. or *Note `DELETE': delete. statements
          with `WHERE' clauses that do not use keys or do not change
          most of the examined rows.

   * Fewer row locks are required on the slave for any *Note `INSERT':
     insert, *Note `UPDATE': update, or *Note `DELETE': delete.
     statement.

* Disadvantages of row-based replication *

   * RBR tends to generate more data that must be logged. To replicate
     a DML statement (such as an *Note `UPDATE': update. or *Note
     `DELETE': delete. statement), statement-based replication writes
     only the statement to the binary log. By contrast, row-based
     replication writes each changed row to the binary log. If the
     statement changes many rows, row-based replication may write
     significantly more data to the binary log; this is true even for
     statements that are rolled back. This also means that taking and
     restoring from backup can require more time. In addition, the
     binary log is locked for a longer time to write the data, which
     may cause concurrency problems.

   * Deterministic UDFs that generate large *Note `BLOB': blob. values
     take longer to replicate with row-based replication than with
     statement-based replication. This is because the *Note `BLOB':
     blob. column value is logged, rather than the statement generating
     the data.

   * You cannot examine the logs to see what statements were executed,
     nor can you see on the slave what statements were received from
     the master and executed.

     However, you can see what data was changed using *Note
     `mysqlbinlog': mysqlbinlog. with the options
     `--base64-output=DECODE-ROWS' and `--verbose'.

   * For tables using the *Note `MyISAM': myisam-storage-engine.
     storage engine, a stronger lock is required on the slave for *Note
     `INSERT': insert. statements when applying them as row-based
     events to the binary log than when applying them as statements.
     This means that concurrent inserts on *Note `MyISAM':
     myisam-storage-engine. tables are not supported when using
     row-based replication.


File: manual.info,  Node: replication-rbr-usage,  Next: replication-rbr-safe-unsafe,  Prev: replication-sbr-rbr,  Up: replication-formats

16.1.2.2 Usage of Row-Based Logging and Replication
...................................................

Major changes in the replication environment and in the behavior of
applications can result from using row-based logging (RBL) or row-based
replication (RBR) rather than statement-based logging or replication.
This section describes a number of issues known to exist when using
row-based logging or replication, and discusses some best practices for
taking advantage of row-based logging and replication.

For additional information, see *Note replication-formats::, and *Note
replication-sbr-rbr::.

For information about issues specific to MySQL Cluster Replication
(which depends on row-based replication), see *Note
mysql-cluster-replication-issues::.

   * RBL, RBR, and temporary tables

     As noted in *Note replication-features-temptables::, temporary
     tables are not replicated when using row-based format. When mixed
     format is in effect, `safe' statements involving temporary tables
     are logged using statement-based format. For more information, see
     *Note replication-sbr-rbr::.

     Temporary tables are not replicated when using row-based format
     because there is no need. In addition, because temporary tables
     can be read only from the thread which created them, there is
     seldom if ever any benefit obtained from replicating them, even
     when using statement-based format.

     Beginning with MySQL 5.5.5, you can switch from statement-based to
     row-based binary logging mode even when temporary tables have been
     created. However, while using the row-based format, the MySQL
     server cannot determine the logging mode that was in effect when a
     given temporary table was created. For this reason, the server in
     such cases logs a *Note `DROP TEMPORARY TABLE IF EXISTS':
     drop-table. statement for each temporary table that still exists
     for a given client session when that session ends. (Bug #11760229,
     Bug #11762267) While this means that it is possible that an
     unnecessary `DROP TEMPORARY TABLE' statement might be logged in
     some cases, the statement is harmless, and does not cause an error
     even if the table does not exist, due to the presence of the `IF
     NOT EXISTS' option.

   * RBL and synchronization of nontransactional tables

     When many rows are affected, the set of changes is split into
     several events; when the statement commits, all of these events
     are written to the binary log. When executing on the slave, a
     table lock is taken on all tables involved, and then the rows are
     applied in batch mode.  (This may or may not be effective,
     depending on the engine used for the slave's copy of the table.)

   * Latency and binary log size

     Because RBL writes changes for each row to the binary log, its
     size can increase quite rapidly. In a replication environment,
     this can significantly increase the time required to make changes
     on the slave that match those on the master. You should be aware
     of the potential for this delay in your applications.

   * Reading the binary log

     *Note `mysqlbinlog': mysqlbinlog. displays row-based events in the
     binary log using the `BINLOG' statement (see *Note binlog::). This
     statement displays an event in printable form, but as a base
     64-encoded string the meaning of which is not evident.  When
     invoked with the `--base64-output=DECODE-ROWS' and `--verbose'
     options, *Note `mysqlbinlog': mysqlbinlog. formats the contents of
     the binary log in a manner that is easily human readable. This is
     helpful when binary log events were written in row-based format if
     you want to read or recover from a replication or database failure
     using the contents of the binary log. For more information, see
     *Note mysqlbinlog-row-events::.

   * Binary log execution errors and `slave_exec_mode'

     If `slave_exec_mode' is `IDEMPOTENT', a failure to apply changes
     from RBL because the original row cannot be found does not trigger
     an error or cause replication to fail. This means that it is
     possible that updates are not applied on the slave, so that the
     master and slave are no longer synchronized. Latency issues and
     use of nontransactional tables with RBR when `slave_exec_mode' is
     `IDEMPOTENT' can cause the master and slave to diverge even
     further. For more information about `slave_exec_mode', see *Note
     server-system-variables::.

     *Note*:

     `slave_exec_mode=IDEMPOTENT' is generally useful only for circular
     replication or multi-master replication with MySQL Cluster, for
     which `IDEMPOTENT' is the default value (see *Note
     mysql-cluster-replication::).

     For other scenarios, setting `slave_exec_mode' to `STRICT' is
     normally sufficient; this is the default value for storage engines
     other than *Note `NDB': mysql-cluster.

   * Lack of binary log checksums

     RBL uses no checksums. This means that network, disk, and other
     errors may not be identified when processing the binary log. To
     ensure that data is transmitted without network corruption, you
     may want to consider using SSL, which adds another layer of
     checksumming, for replication connections. The *Note `CHANGE
     MASTER TO': change-master-to. statement has options to enable
     replication over SSL. See also *Note change-master-to::, for
     general information about setting up MySQL with SSL.

   * Filtering based on server ID not supported

     A common practice is to filter out changes on some slaves by using
     a `WHERE' clause that includes the relation `@@server_id <>
     ID_VALUE' clause with *Note `UPDATE': update. and *Note `DELETE':
     delete. statements, a simple example of such a clause being `WHERE
     @@server_id <> 1'. However, this does not work correctly with
     row-based logging. If you must use the `server_id' system variable
     for statement filtering, you must also use
     `--binlog_format=STATEMENT'.

     In MySQL 5.5, you can do filtering based on server ID by using the
     `IGNORE_SERVER_IDS' option for the *Note `CHANGE MASTER TO':
     change-master-to. statement. This option works with the
     statement-based and row-based logging formats.

   * Database-level replication options

     The effects of the `--replicate-do-db', `--replicate-ignore-db',
     and `--replicate-rewrite-db' options differ considerably depending
     on whether row-based or statement-based logging is used. Because
     of this, it is recommended to avoid database-level options and
     instead use table-level options such as `--replicate-do-table' and
     `--replicate-ignore-table'.  For more information about these
     options and the impact that your choice of replication format has
     on how they operate, see *Note replication-options::.

   * RBL, nontransactional tables, and stopped slaves

     When using row-based logging, if the slave server is stopped while
     a slave thread is updating a nontransactional table, the slave
     database may reaches an inconsistent state. For this reason, it is
     recommended that you use a transactional storage engine such as
     *Note `InnoDB': innodb-storage-engine. for all tables replicated
     using the row-based format.

     Use of *Note `STOP SLAVE': stop-slave. (or *Note `STOP SLAVE
     SQL_THREAD': stop-slave. in MySQL 5.5.9 and later) prior to
     shutting down the slave MySQL server helps prevent such issues
     from occurring, and is always recommended regardless of the
     logging format or storage engines employed.


File: manual.info,  Node: replication-rbr-safe-unsafe,  Prev: replication-rbr-usage,  Up: replication-formats

16.1.2.3 Determination of Safe and Unsafe Statements in Binary Logging
......................................................................

When speaking of the `safeness' of a statement in MySQL Replication, we
are referring to whether a statement and its effects can be replicated
correctly using statement-based format. If this is true of the
statement, we refer to the statement as _safe_; otherwise, we refer to
it as _unsafe_.

In general, a statement is safe if it deterministic, and unsafe if it
is not. However, certain nondeterministic functions are _not_
considered unsafe (see *Note replication-rbr-safe-unsafe-not::, later
in this section). In addition, statements using results from
floating-point math functions--which are hardware-dependent--are always
considered safe (see *Note replication-features-floatvalues::).

Handling of safe and unsafe statements

A statement is treated differently depending on whether the statement
is considered safe, and with respect to the binary logging format (that
is, the current value of `binlog_format').

   * No distinction is made in the treatment of safe and unsafe
     statements when the binary logging mode is `ROW'.

   * If the binary logging format is `MIXED', statements flagged as
     unsafe are logged using the row-based format; statements regarded
     as safe are logged using the statement-based format.

   * If the binary logging format is `STATEMENT', statements flagged as
     being unsafe generate a warning to this effect. (Safe statements
     are logged normally.)

Each statement flagged as unsafe generates a warning. Formerly, in
cases where a great many such statements were executed on the master,
this could lead to very large error log files, sometimes even filling
up an entire disk unexpectedly. To guard against this, MySQL 5.5.27
introduced a warning suppression mechanism, which behaves as follows:
Whenever the 50 most recent `ER_BINLOG_UNSAFE_STATEMENT' warnings have
been generated more than 50 times in any 50-second period, warning
suppression is enabled. When activated, this causes such warnings not
to be written to the error log; instead, for each 50 warnings of this
type, a note `The last warning was repeated N times in last S seconds'
is written to the error log. This continues as long as the 50 most
recent such warnings were issued in 50 seconds or less; once the rate
has decreased below this threshold, the warnings are once again logged
normally. Warning suppression has no effect on how the safety of
statements for statement-based logging is determined, nor on how
warnings are sent to the client (MySQL clients still receive one
warning for each such statement).

For more information, see *Note replication-formats::.

Statements considered unsafe

Statements having the following characteristics are considered unsafe:

   * Statements containing system functions that may return a different
     value on slave.

     These functions include `FOUND_ROWS()', `GET_LOCK()',
     `IS_FREE_LOCK()', `IS_USED_LOCK()', `LOAD_FILE()',
     `MASTER_POS_WAIT()', `RAND()', `RELEASE_LOCK()', `ROW_COUNT()',
     `SESSION_USER()', `SLEEP()', `SYSDATE()', `SYSTEM_USER()',
     `USER()', `UUID()', and `UUID_SHORT()'.

     Nondeterministic functions not considered unsafe

     Although these functions are not deterministic, they are treated
     as safe for purposes of logging and replication: `CONNECTION_ID()',
     `CURDATE()', `CURRENT_DATE()', `CURRENT_TIME()',
     `CURRENT_TIMESTAMP()', `CURTIME()', `LOCALTIME()',
     `LOCALTIMESTAMP()', `NOW()', `UNIX_TIMESTAMP()', `UTC_DATE()',
     `UTC_TIME()', `UTC_TIMESTAMP()', and `LAST_INSERT_ID()'

     For more information, see *Note replication-features-functions::.

   * References to system variables

     Most system variables are not replicated correctly using the
     statement-based format. For exceptions, see *Note
     binary-log-mixed::.

     See *Note replication-features-variables::.

   * UDFs

     Since we have no control over what a UDF does, we must assume that
     it is executing unsafe statements.

   * Updates a table having an `AUTO_INCREMENT' column

     Prior to MySQL 5.5.3, all such statements were always considered
     unsafe because the order in which the rows are updated could
     differ on the master and the slave. In MySQL 5.3.3 and later,
     these statements are unsafe only when they are executed by a
     trigger or stored program (Bug #50192, Bug #11758052).

     An *Note `INSERT': insert. into a table that has a composite
     primary key containing an `AUTO_INCREMENT' column that is not the
     first column of this composite key is unsafe.

     For more information, see *Note
     replication-features-auto-increment::.

   * `INSERT DELAYED' statement

     This statement is considered unsafe because the insertion of the
     rows may interleave with concurrently executing statements.

   * `INSERT ... ON DUPLICATE KEY UPDATE' statements on tables with
     multiple primary or unique keys

     When executed against a table that contains more than one primary
     or unique key, this statement is considered unsafe, being
     sensitive to the order in which the storage engine checks the
     keys, which is not deterministic, and on which the choice of rows
     updated by the MySQL Server depends.

     An *Note `INSERT ... ON DUPLICATE KEY UPDATE':
     insert-on-duplicate. statement against a table having more than
     one unique or primary key is marked as unsafe for statement-based
     replication beginning with MySQL 5.5.24. (Bug #11765650, Bug
     #58637)

   * Updates using `LIMIT'

     The order in which rows are retrieved is not specified.

     See *Note replication-features-limit::.

   * Accesses or references log tables

     The contents of the system log table may differ between master and
     slave.

   * Nontransactional operations after transactional operations

     Within a transaction, allowing any nontransactional reads or
     writes to execute after any transactional reads or writes is
     considered unsafe.

     For more information, see *Note
     replication-features-transactions::.

   * Accesses or references self-logging tables

     All reads and writes to self-logging tables are considered unsafe.
     Within a transaction, any statement following a read or write to
     self-logging tables is also considered unsafe.

   * `LOAD DATA INFILE' statements

     Beginning with MySQL 5.5.6, *Note `LOAD DATA INFILE': load-data.
     is considered unsafe, it causes a warning in statement-based mode,
     and a switch to row-based format when using mixed-format logging.
     See *Note replication-features-load-data::.

For additional information, see *Note replication-features::.


File: manual.info,  Node: replication-options,  Next: replication-administration,  Prev: replication-formats,  Up: replication-configuration

16.1.3 Replication and Binary Logging Options and Variables
-----------------------------------------------------------

* Menu:

* replication-options-table::    Replication and Binary Logging Option and Variable Reference
* replication-options-master::   Replication Master Options and Variables
* replication-options-slave::    Replication Slave Options and Variables
* replication-options-binary-log::  Binary Log Options and Variables

The next few sections contain information about *Note `mysqld': mysqld.
options and server variables that are used in replication and for
controlling the binary log. Options and variables for use on
replication masters and replication slaves are covered separately, as
are options and variables relating to binary logging. A set of
quick-reference tables providing basic information about these options
and variables is also included (in the next section following this one).

Of particular importance is the `--server-id' option.

Options for server-id

*Command-Line Format*  `--server-id=#'        
*Option-File Format*   `server-id'        
*System Variable Name* `server_id'        
*Variable Scope*       Global          
*Dynamic Variable*     Yes             
                       *Permitted        
                       Values*         
*Type*                 `numeric'        
*Default*              `0'             
*Range*                `0 ..           
                       4294967295'        

This option is common to both master and slave replication servers, and
is used in replication to enable master and slave servers to identify
themselves uniquely. For additional information, see *Note
replication-options-master::, and *Note replication-options-slave::.

On the master and each slave, you _must_ use the `--server-id' option
to establish a unique replication ID in the range from 1 to 2^32 - 1.
`Unique', means that each ID must be different from every other ID in
use by any other replication master or slave. Example: `server-id=3'.

If you omit `--server-id', the default ID is 0, in which case a master
refuses connections from all slaves, and a slave refuses to connect to
a master. For more information, see *Note
replication-howto-slavebaseconfig::.


File: manual.info,  Node: replication-options-table,  Next: replication-options-master,  Prev: replication-options,  Up: replication-options

16.1.3.1 Replication and Binary Logging Option and Variable Reference
.....................................................................

The following tables list basic information about the MySQL
command-line options and system variables applicable to replication and
the binary log.

*Replication Options and Variables: MySQL 5.5*

This table provides a summary of Replication options and variables in
MySQL 5.5

Option or Variable Name                         Command   System   Scope
                                                Line      Variable 
Option File                                     Status    Dynamic  
                                                Variable           
`Com_change_master'                             N         N        Both
N                                               Y         N        
`Com_show_master_status'                        N         N        Both
N                                               Y         N        
`Com_show_new_master'                           N         N        Both
N                                               Y         N        
`Com_show_slave_hosts'                          N         N        Both
N                                               Y         N        
`Com_show_slave_status'                         N         N        Both
N                                               Y         N        
`Com_slave_start'                               N         N        Both
N                                               Y         N        
`Com_slave_stop'                                N         N        Both
N                                               Y         N        
`Rpl_semi_sync_master_clients'                  N         N        Global
N                                               Y         N        
`Rpl_semi_sync_master_net_avg_wait_time'        N         N        Global
N                                               Y         N        
`Rpl_semi_sync_master_net_wait_time'            N         N        Global
N                                               Y         N        
`Rpl_semi_sync_master_net_waits'                N         N        Global
N                                               Y         N        
`Rpl_semi_sync_master_no_times'                 N         N        Global
N                                               Y         N        
`Rpl_semi_sync_master_no_tx'                    N         N        Global
N                                               Y         N        
`Rpl_semi_sync_master_status'                   N         N        Global
N                                               Y         N        
`Rpl_semi_sync_master_timefunc_failures'        N         N        Global
N                                               Y         N        
`Rpl_semi_sync_master_tx_avg_wait_time'         N         N        Global
N                                               Y         N        
`Rpl_semi_sync_master_tx_wait_time'             N         N        Global
N                                               Y         N        
`Rpl_semi_sync_master_tx_waits'                 N         N        Global
N                                               Y         N        
`Rpl_semi_sync_master_wait_pos_backtraverse'    N         N        Global
N                                               Y         N        
`Rpl_semi_sync_master_wait_sessions'            N         N        Global
N                                               Y         N        
`Rpl_semi_sync_master_yes_tx'                   N         N        Global
N                                               Y         N        
`Rpl_semi_sync_slave_status'                    N         N        Global
N                                               Y         N        
`Rpl_status'                                    N         N        Global
N                                               Y         N        
`slave_exec_mode'                               Y         Y        Global
Y                                               N         Y        
`Slave_open_temp_tables'                        N         N        Global
N                                               Y         N        
`Slave_retried_transactions'                    N         N        Global
N                                               Y         N        
`Slave_running'                                 N         N        Global
N                                               Y         N        
`abort-slave-event-count'                       Y         N        Global
Y                                               N         N        
`disconnect-slave-event-count'                  Y         N        Global
Y                                               N         N        
`init_slave'                                    Y         Y        Global
Y                                               N         Y        
`log-slave-updates'                             Y         Y        Global
Y                                               N         N        
`log_slave_updates'                             Y         Y        Global
Y                                               N         N        
`master-connect-retry'                          Y         N        Global
Y                                               N         N        
`master-host'                                   Y         N        Global
Y                                               N         N        
`master-info-file'                              Y         N        Global
Y                                               N         N        
`master-password'                               Y         N        Global
Y                                               N         N        
`master-port'                                   Y         N        Global
Y                                               N         N        
`master-retry-count'                            Y         N        Global
Y                                               N         N        
`master-ssl'                                    Y         N        Global
Y                                               N         N        
`master-ssl-ca'                                 Y         N        Global
Y                                               N         N        
`master-ssl-capath'                             Y         N        Global
Y                                               N         N        
`master-ssl-cert'                               Y         N        Global
Y                                               N         N        
`master-ssl-cipher'                             Y         N        Global
Y                                               N         N        
`master-ssl-key'                                Y         N        Global
Y                                               N         N        
`master-user'                                   Y         N        Global
Y                                               N         N        
`relay-log'                                     Y         Y        Global
Y                                               N         N        
`relay-log-index'                               Y         Y        Global
Y                                               N         N        
`relay-log-info-file'                           Y         N        Global
Y                                               N         N        
`relay_log_info_file'                           Y         Y        Global
Y                                               N         N        
`relay_log_index'                               Y         Y        Global
Y                                               N         N        
`relay_log_purge'                               Y         Y        Global
Y                                               N         Y        
`relay-log-recovery'                            Y         N        Global
Y                                               N         N        
`relay_log_recovery'                            Y         Y        Global
Y                                               N         Y        
`relay_log_space_limit'                         Y         Y        Global
Y                                               N         N        
`replicate-do-db'                               Y         N        Global
Y                                               N         N        
`replicate-do-table'                            Y         N        Global
Y                                               N         N        
`replicate-ignore-db'                           Y         N        Global
Y                                               N         N        
`replicate-ignore-table'                        Y         N        Global
Y                                               N         N        
`replicate-rewrite-db'                          Y         N        Global
Y                                               N         N        
`replicate-same-server-id'                      Y         N        Global
Y                                               N         N        
`replicate-wild-do-table'                       Y         N        Global
Y                                               N         N        
`replicate-wild-ignore-table'                   Y         N        Global
Y                                               N         N        
`report-host'                                   Y         Y        Global
Y                                               N         N        
`report-password'                               Y         Y        Global
Y                                               N         N        
`report-port'                                   Y         Y        Global
Y                                               N         N        
`report-user'                                   Y         Y        Global
Y                                               N         N        
`rpl_recovery_rank'                             N         Y        Global
N                                               N         Y        
`rpl_semi_sync_master_enabled'                  N         Y        Global
N                                               N         Y        
`rpl_semi_sync_master_timeout'                  N         Y        Global
N                                               N         Y        
`rpl_semi_sync_master_trace_level'              N         Y        Global
N                                               N         Y        
`rpl_semi_sync_master_wait_no_slave'            N         Y        Global
N                                               N         Y        
`rpl_semi_sync_slave_enabled'                   N         Y        Global
N                                               N         Y        
`rpl_semi_sync_slave_trace_level'               N         Y        Global
N                                               N         Y        
`show-slave-auth-info'                          Y         N        Global
Y                                               N         N        
`skip-slave-start'                              Y         N        Global
Y                                               N         N        
`slave_allow_batching'                          Y         Y        Global
Y                                               N         Y        
`slave-load-tmpdir'                             Y         Y        Global
Y                                               N         N        
`slave-skip-errors'                             Y         Y        Global
Y                                               N         N        
`slave_compressed_protocol'                     Y         Y        Global
Y                                               N         Y        
`slave-max-allowed-packet'                      Y         N        Global
Y                                               N         N        
`slave_max_allowed_packet'                      N         Y        Global
N                                               N         Y        
`slave_net_timeout'                             Y         Y        Global
Y                                               N         Y        
`slave_transaction_retries'                     Y         Y        Global
Y                                               N         Y        
`slave_type_conversions'                        Y         Y        Global
Y                                               N         N        
`sql_slave_skip_counter'                        N         Y        Global
N                                               N         Y        
`sync_master_info'                              Y         Y        Global
Y                                               N         Y        
`sync_relay_log'                                Y         Y        Global
Y                                               N         Y        
`sync_relay_log_info'                           Y         Y        Global
Y                                               N         Y        

*Note replication-options-master::, provides more detailed information
about options and variables relating to replication master servers. For
more information about options and variables relating to replication
slaves, see *Note replication-options-slave::.

*Binary Logging Options and Variables: MySQL 5.5*

This table provides a summary of Binary Logging options and variables
in MySQL 5.5

Option or Variable Name                         Command   System   Scope
                                                Line      Variable 
Option File                                     Status    Dynamic  
                                                Variable           
`Binlog_cache_disk_use'                         N         N        Global
N                                               Y         N        
`Binlog_stmt_cache_disk_use'                    N         N        Global
N                                               Y         N        
`Binlog_cache_use'                              N         N        Global
N                                               Y         N        
`Binlog_stmt_cache_use'                         N         N        Global
N                                               Y         N        
`Com_show_binlog_events'                        N         N        Both
N                                               Y         N        
`Com_show_binlogs'                              N         N        Both
N                                               Y         N        
`binlog-do-db'                                  Y         N        Global
Y                                               N         N        
`binlog-ignore-db'                              Y         N        Global
Y                                               N         N        
`binlog-row-event-max-size'                     Y         N        Global
Y                                               N         N        
`binlog_cache_size'                             Y         Y        Global
Y                                               N         Y        
`binlog_stmt_cache_size'                        Y         Y        Global
Y                                               N         Y        
`binlog_format'                                 Y         Y        Both
Y                                               N         Y        
`binlog_direct_non_transactional_updates'       Y         Y        Both
Y                                               N         Y        
`log-bin-use-v1-row-events'                     Y         Y        Global
Y                                               N         N        
`log_bin_use_v1_row_events'                     Y         Y        Global
Y                                               N         N        
`max-binlog-dump-events'                        Y         N        Global
Y                                               N         N        
`max_binlog_cache_size'                         Y         Y        Global
Y                                               N         Y        
`max_binlog_size'                               Y         Y        Global
Y                                               N         Y        
`max_binlog_stmt_cache_size'                    Y         Y        Global
Y                                               N         Y        
`sporadic-binlog-dump-fail'                     Y         N        Global
Y                                               N         N        

*Note replication-options-binary-log::, provides more detailed
information about options and variables relating to binary logging. For
additional general information about the binary log, see *Note
binary-log::.

For a table showing _all_ command-line options, system and status
variables used with *Note `mysqld': mysqld, see *Note
mysqld-option-tables::.


File: manual.info,  Node: replication-options-master,  Next: replication-options-slave,  Prev: replication-options-table,  Up: replication-options

16.1.3.2 Replication Master Options and Variables
.................................................

This section describes the server options and system variables that you
can use on replication master servers. You can specify the options
either on the *Note command line: command-line-options. or in an *Note
option file: option-files. You can specify system variable values using
*Note `SET': set-statement.

On the master and each slave, you must use the `server-id' option to
establish a unique replication ID. For each server, you should pick a
unique positive integer in the range from 1 to 2^32 - 1, and each ID
must be different from every other ID in use by any other replication
master or slave. Example: `server-id=3'.

For options used on the master for controlling binary logging, see
*Note replication-options-binary-log::.

System variables used on replication masters

The following system variables are used in controlling replication
masters:

   *  `auto_increment_increment'

     Options for auto_increment_increment

     *System Variable     `auto_increment_increment'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1'             
     *Range*              `1 ..           
                          65535'          

     `auto_increment_increment' and `auto_increment_offset' are
     intended for use with master-to-master replication, and can be
     used to control the operation of `AUTO_INCREMENT' columns. Both
     variables have global and session values, and each can assume an
     integer value between 1 and 65,535 inclusive. Setting the value of
     either of these two variables to 0 causes its value to be set to 1
     instead. Attempting to set the value of either of these two
     variables to an integer greater than 65,535 or less than 0 causes
     its value to be set to 65,535 instead. Attempting to set the value
     of `auto_increment_increment' or `auto_increment_offset' to a
     noninteger value gives rise to an error, and the actual value of
     the variable remains unchanged.

     *Note*:

     `auto_increment_increment' is also supported for use with *Note
     `NDB': mysql-cluster.  tables.

     These two variables affect `AUTO_INCREMENT' column behavior as
     follows:

        * `auto_increment_increment' controls the interval between
          successive column values.  For example:

               mysql> SHOW VARIABLES LIKE 'auto_inc%';
               +--------------------------+-------+
               | Variable_name            | Value |
               +--------------------------+-------+
               | auto_increment_increment | 1     |
               | auto_increment_offset    | 1     |
               +--------------------------+-------+
               2 rows in set (0.00 sec)

               mysql> CREATE TABLE autoinc1
                   -> (col INT NOT NULL AUTO_INCREMENT PRIMARY KEY);
                 Query OK, 0 rows affected (0.04 sec)

               mysql> SET @@auto_increment_increment=10;
               Query OK, 0 rows affected (0.00 sec)

               mysql> SHOW VARIABLES LIKE 'auto_inc%';
               +--------------------------+-------+
               | Variable_name            | Value |
               +--------------------------+-------+
               | auto_increment_increment | 10    |
               | auto_increment_offset    | 1     |
               +--------------------------+-------+
               2 rows in set (0.01 sec)

               mysql> INSERT INTO autoinc1 VALUES (NULL), (NULL), (NULL), (NULL);
               Query OK, 4 rows affected (0.00 sec)
               Records: 4  Duplicates: 0  Warnings: 0

               mysql> SELECT col FROM autoinc1;
               +-----+
               | col |
               +-----+
               |   1 |
               |  11 |
               |  21 |
               |  31 |
               +-----+
               4 rows in set (0.00 sec)

        * `auto_increment_offset' determines the starting point for the
          `AUTO_INCREMENT' column value. Consider the following,
          assuming that these statements are executed during the same
          session as the example given in the description for
          `auto_increment_increment':

               mysql> SET @@auto_increment_offset=5;
               Query OK, 0 rows affected (0.00 sec)

               mysql> SHOW VARIABLES LIKE 'auto_inc%';
               +--------------------------+-------+
               | Variable_name            | Value |
               +--------------------------+-------+
               | auto_increment_increment | 10    |
               | auto_increment_offset    | 5     |
               +--------------------------+-------+
               2 rows in set (0.00 sec)

               mysql> CREATE TABLE autoinc2
                   -> (col INT NOT NULL AUTO_INCREMENT PRIMARY KEY);
               Query OK, 0 rows affected (0.06 sec)

               mysql> INSERT INTO autoinc2 VALUES (NULL), (NULL), (NULL), (NULL);
               Query OK, 4 rows affected (0.00 sec)
               Records: 4  Duplicates: 0  Warnings: 0

               mysql> SELECT col FROM autoinc2;
               +-----+
               | col |
               +-----+
               |   5 |
               |  15 |
               |  25 |
               |  35 |
               +-----+
               4 rows in set (0.02 sec)

          If the value of `auto_increment_offset' is greater than that
          of `auto_increment_increment', the value of
          `auto_increment_offset' is ignored.

     Should one or both of these variables be changed and then new rows
     inserted into a table containing an `AUTO_INCREMENT' column, the
     results may seem counterintuitive because the series of
     `AUTO_INCREMENT' values is calculated without regard to any values
     already present in the column, and the next value inserted is the
     least value in the series that is greater than the maximum
     existing value in the `AUTO_INCREMENT' column. In other words, the
     series is calculated like so:

     `auto_increment_offset' + N x `auto_increment_increment'

     where N is a positive integer value in the series [1, 2, 3, ...].
     For example:

          mysql> SHOW VARIABLES LIKE 'auto_inc%';
          +--------------------------+-------+
          | Variable_name            | Value |
          +--------------------------+-------+
          | auto_increment_increment | 10    |
          | auto_increment_offset    | 5     |
          +--------------------------+-------+
          2 rows in set (0.00 sec)

          mysql> SELECT col FROM autoinc1;
          +-----+
          | col |
          +-----+
          |   1 |
          |  11 |
          |  21 |
          |  31 |
          +-----+
          4 rows in set (0.00 sec)

          mysql> INSERT INTO autoinc1 VALUES (NULL), (NULL), (NULL), (NULL);
          Query OK, 4 rows affected (0.00 sec)
          Records: 4  Duplicates: 0  Warnings: 0

          mysql> SELECT col FROM autoinc1;
          +-----+
          | col |
          +-----+
          |   1 |
          |  11 |
          |  21 |
          |  31 |
          |  35 |
          |  45 |
          |  55 |
          |  65 |
          +-----+
          8 rows in set (0.00 sec)

     The values shown for `auto_increment_increment' and
     `auto_increment_offset' generate the series 5 + N x 10, that is,
     [5, 15, 25, 35, 45, ...]. The greatest value present in the `col'
     column prior to the *Note `INSERT': insert. is 31, and the next
     available value in the `AUTO_INCREMENT' series is 35, so the
     inserted values for `col' begin at that point and the results are
     as shown for the *Note `SELECT': select. query.

     It is not possible to confine the effects of these two variables
     to a single table, and thus they do not take the place of the
     sequences offered by some other database management systems; these
     variables control the behavior of all `AUTO_INCREMENT' columns in
     _all_ tables on the MySQL server. If the global value of either
     variable is set, its effects persist until the global value is
     changed or overridden by setting the session value, or until *Note
     `mysqld': mysqld. is restarted. If the local value is set, the new
     value affects `AUTO_INCREMENT' columns for all tables into which
     new rows are inserted by the current user for the duration of the
     session, unless the values are changed during that session.

     The default value of `auto_increment_increment' is 1. See *Note
     replication-features-auto-increment::.

   *  `auto_increment_offset'

     Options for auto_increment_offset

     *System Variable     `auto_increment_offset'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1'             
     *Range*              `1 ..           
                          65535'          

     This variable has a default value of 1. For particulars, see the
     description for `auto_increment_increment'.

     *Note*:

     `auto_increment_offset' is supported for use with *Note `NDB':
     mysql-cluster.  tables only.


File: manual.info,  Node: replication-options-slave,  Next: replication-options-binary-log,  Prev: replication-options-master,  Up: replication-options

16.1.3.3 Replication Slave Options and Variables
................................................

This section describes the server options and system variables that
apply to slave replication servers. You can specify the options either
on the *Note command line: command-line-options. or in an *Note option
file: option-files. Many of the options can be set while the server is
running by using the *Note `CHANGE MASTER TO': change-master-to.
statement. You can specify system variable values using *Note `SET':
set-statement.

Server ID

On the master and each slave, you must use the `server-id' option to
establish a unique replication ID in the range from 1 to 2^32 - 1.
`Unique' means that each ID must be different from every other ID in use
by any other replication master or slave. Example `my.cnf' file:

     [mysqld]
     server-id=3

Startup options for replication slaves

The following list describes startup options for controlling
replication slave servers. Many of these options can be set while the
server is running by using the *Note `CHANGE MASTER TO':
change-master-to. statement.  Others, such as the `--replicate-*'
options, can be set only when the slave server starts.
Replication-related system variables are discussed later in this
section.

   *  `--abort-slave-event-count'

     Options for abort-slave-event-count

     *Command-Line        `--abort-slave-event-count=#'        
     Format*                              
     *Option-File Format* `abort-slave-event-count'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Min Value*          `0'             

     When this option is set to some positive integer VALUE other than
     0 (the default) it affects replication behavior as follows: After
     the slave SQL thread has started, VALUE log events are permitted
     to be executed; after that, the slave SQL thread does not receive
     any more events, just as if the network connection from the master
     were cut. The slave thread continues to run, and the output from
     *Note `SHOW SLAVE STATUS': show-slave-status. displays `Yes' in
     both the `Slave_IO_Running' and the `Slave_SQL_Running' columns,
     but no further events are read from the relay log.

     This option is used internally by the MySQL test suite for
     replication testing and debugging. It is not intended for use in a
     production setting.

   *  `--disconnect-slave-event-count'

     Options for disconnect-slave-event-count

     *Command-Line        `--disconnect-slave-event-count=#'        
     Format*                              
     *Option-File Format* `disconnect-slave-event-count'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             

     This option is used internally by the MySQL test suite for
     replication testing and debugging.

   *  `--log-slave-updates'

     Options for log-slave-updates

     *Command-Line        `--log-slave-updates'        
     Format*                              
     *Option-File Format* `log-slave-updates'        
     *System Variable     `log_slave_updates'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Normally, a slave does not log to its own binary log any updates
     that are received from a master server. This option tells the
     slave to log the updates performed by its SQL thread to its own
     binary log. For this option to have any effect, the slave must
     also be started with the `--log-bin' option to enable binary
     logging. Prior to MySQL 5.5, the server would not start when using
     the `--log-slave-updates' option without also starting the server
     with the `--log-bin' option, and would fail with an error; in
     MySQL 5.5, only a warning is generated. (Bug #44663)
     `--log-slave-updates' is used when you want to chain replication
     servers. For example, you might want to set up replication servers
     using this arrangement:

          A -> B -> C

     Here, `A' serves as the master for the slave `B', and `B' serves
     as the master for the slave `C'. For this to work, `B' must be
     both a master _and_ a slave. You must start both `A' and `B' with
     `--log-bin' to enable binary logging, and `B' with the
     `--log-slave-updates' option so that updates received from `A' are
     logged by `B' to its binary log.

   *  `--log-slow-slave-statements'

     Options for log-slow-slave-statements

     *Command-Line        `--log-slow-slave-statements'        
     Format*                              
     *Option-File Format* `log-slow-slave-statements'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     When the slow query log is enabled, this option enables logging
     for queries that have taken more than `long_query_time' seconds to
     execute on the slave.

   * `--log-warnings[=LEVEL]'

     Options for log-warnings

     *Command-Line        `--log-warnings[=#]'        
     Format*                              
                          `-W             
                          [#]'            
     *Option-File Format* `log-warnings[=#]'        
     *System Variable     `log_warnings'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `1'             
     *Range*              `0 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `1'             
     *Range*              `0 ..           
                          18446744073709547520'        

     This option causes a server to print more messages to the error
     log about what it is doing. With respect to replication, the
     server generates warnings that it succeeded in reconnecting after
     a network/connection failure, and informs you as to how each slave
     thread started. This option is enabled (1) by default; to disable
     it, use `--log-warnings=0'. If the value is greater than 1,
     aborted connections are written to the error log, and
     access-denied errors for new connection attempts are written. See
     *Note communication-errors::.

     Note that the effects of this option are not limited to
     replication. It produces warnings across a spectrum of server
     activities.

   *  `--master-info-file=FILE_NAME'

     Options for master-info-file

     *Command-Line        `--master-info-file=file_name'        
     Format*                              
     *Option-File Format* `master-info-file'        
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           
     *Default*            `master.info'        

     The name to use for the file in which the slave records
     information about the master. The default name is `master.info' in
     the data directory. For information about the format of this file,
     see *Note slave-logs-status::.

   *  `--master-retry-count=COUNT'

     Options for master-retry-count

     *Command-Line        `--master-retry-count=#'        
     Format*                              
     *Option-File Format* `master-retry-count'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `86400'         
     *Range*              `0 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `86400'         
     *Range*              `0 ..           
                          18446744073709551615'        

     The number of times that the slave tries to connect to the master
     before giving up. Reconnects are attempted at intervals set by the
     `MASTER_CONNECT_RETRY' option of the *Note `CHANGE MASTER TO':
     change-master-to. statement (default 60). Reconnects are triggered
     when data reads by the slave time out according to the
     `--slave-net-timeout' option. The default value is 86400. A value
     of 0 means `infinite'; the slave attempts to connect forever.

   *  `slave-max-allowed-packet=BYTES'

     Options for slave-max-allowed-packet

     *Introduced*         5.5.26          
     *Command-Line        `--slave-max-allowed-packet=#'        
     Format*                              
     *Option-File Format* `slave-max-allowed-packet'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1073741824'        
     *Range*              `1024           
                          ..              
                          1073741824'        

     In MySQL 5.5.26 and later, this option sets the maximum packet
     size in bytes for the slave SQL and I/O threads, so that large
     updates using row-based replication do not cause replication to
     fail because an update exceeded `max_allowed_packet'. (Bug
     #12400221, Bug #60926)

     The corresponding server variable `slave_max_allowed_packet'
     always has a value that is a positive integer multiple of 1024; if
     you set it to some value that is not such a multiple, the value is
     automatically rounded down to the next highest multiple of 1024.
     (For example, if you start the server with
     `--slave-max-allowed-packet=10000', the value used is 9216;
     setting 0 as the value causes 1024 to be used.)  A truncation
     warning is issued in such cases.

     The maximum (and default) value is 1073741824 (1 GB); the minimum
     is 1024.

   *  `--max-relay-log-size=SIZE'

     Options for max_relay_log_size

     *Command-Line        `--max_relay_log_size=#'        
     Format*                              
     *Option-File Format* `max_relay_log_size'        
     *System Variable     `max_relay_log_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          1073741824'        

     The size at which the server rotates relay log files
     automatically. For more information, see *Note slave-logs::. The
     default size is 1GB.

   *  `--read-only'

     Options for read_only

     *Command-Line        `--read-only'        
     Format*                              
     *Option-File Format* `read_only'        
     *System Variable     `read_only'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `false'         

     Cause the slave to permit no updates except from slave threads or
     from users having the `SUPER' privilege. On a slave server, this
     can be useful to ensure that the slave accepts updates only from
     its master server and not from clients. This variable does not
     apply to `TEMPORARY' tables.

   *  `--relay-log=FILE_NAME'

     Options for relay-log

     *Command-Line        `--relay-log=name'        
     Format*                              
     *Option-File Format* `relay-log'        
     *System Variable     `relay_log'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The basename for the relay log. The default basename is
     `HOST_NAME-relay-bin'.  The server writes the file in the data
     directory unless the basename is given with a leading absolute
     path name to specify a different directory. The server creates
     relay log files in sequence by adding a numeric suffix to the
     basename.

     Due to the manner in which MySQL parses server options, if you
     specify this option, you must supply a value; _the default
     basename is used only if the option is not actually specified_. If
     you use the `--relay-log' option without specifying a value,
     unexpected behavior is likely to result; this behavior depends on
     the other options used, the order in which they are specified, and
     whether they are specified on the command line or in an option
     file. For more information about how MySQL handles server options,
     see *Note program-options::.

     If you specify this option, the value specified is also used as
     the basename for the relay log index file. You can override this
     behavior by specifying a different relay log index file basename
     using the `--relay-log-index' option.

     Starting with MySQL 5.5.20, when the server reads an entry from
     the index file, it checks whether the entry contains a relative
     path. If it does, the relative part of the path in replaced with
     the absolute path set using the `--relay-log' option. An absolute
     path remains unchanged; in such a case, the index must be edited
     manually to enable the new path or paths to be used. Prior to MySQL
     5.5.20, manual intervention was required whenever relocating the
     binary log or relay log files. (Bug #11745230, Bug #12133)

     You may find the `--relay-log' option useful in performing the
     following tasks:

        * Creating relay logs whose names are independent of host names.

        * If you need to put the relay logs in some area other than the
          data directory because your relay logs tend to be very large
          and you do not want to decrease `max_relay_log_size'.

        * To increase speed by using load-balancing between disks.

   *  `--relay-log-index=FILE_NAME'

     Options for relay-log-index

     *Command-Line        `--relay-log-index=name'        
     Format*                              
     *Option-File Format* `relay-log-index'        
     *System Variable     `relay_log_index'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The name to use for the relay log index file. The default name is
     `HOST_NAME-relay-bin.index' in the data directory, where HOST_NAME
     is the name of the slave server.

     Due to the manner in which MySQL parses server options, if you
     specify this option, you must supply a value; _the default
     basename is used only if the option is not actually specified_. If
     you use the `--relay-log-index' option without specifying a value,
     unexpected behavior is likely to result; this behavior depends on
     the other options used, the order in which they are specified, and
     whether they are specified on the command line or in an option
     file. For more information about how MySQL handles server options,
     see *Note program-options::.

     If you specify this option, the value specified is also used as
     the basename for the relay logs. You can override this behavior by
     specifying a different relay log file basename using the
     `--relay-log' option.

   *  `--relay-log-info-file=FILE_NAME'

     Options for relay-log-info-file

     *Command-Line        `--relay-log-info-file=file_name'        
     Format*                              
     *Option-File Format* `relay-log-info-file'        
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           
     *Default*            `relay-log.info'        

     The name to use for the file in which the slave records
     information about the relay logs. The default name is
     `relay-log.info' in the data directory. For information about the
     format of this file, see *Note slave-logs-status::.

   *  `--relay-log-purge={0|1}'

     Options for relay_log_purge

     *Command-Line        `--relay_log_purge'        
     Format*                              
     *Option-File Format* `relay_log_purge'        
     *System Variable     `relay_log_purge'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `TRUE'          

     Disable or enable automatic purging of relay logs as soon as they
     are no longer needed. The default value is 1 (enabled).  This is a
     global variable that can be changed dynamically with `SET GLOBAL
     relay_log_purge = N'.

   *  `--relay-log-recovery={0|1}'

     Options for relay-log-recovery

     *Command-Line        `--relay-log-recovery'        
     Format*                              
     *Option-File Format* `relay-log-recovery'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Enables automatic relay log recovery immediately following server
     startup, which means that the replication slave discards all
     unprocessed relay logs and retrieves them from the replication
     master. This should be used following a crash on the replication
     slave to ensure that no possibly corrupted relay logs are
     processed. The default value is 0 (disabled).

   *  `--relay-log-space-limit=SIZE'

     Options for relay_log_space_limit

     *Command-Line        `--relay_log_space_limit=#'        
     Format*                              
     *Option-File Format* `relay_log_space_limit'        
     *System Variable     `relay_log_space_limit'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          18446744073709547520'        

     This option places an upper limit on the total size in bytes of
     all relay logs on the slave. A value of 0 means `no limit.' This
     is useful for a slave server host that has limited disk space.
     When the limit is reached, the I/O thread stops reading binary log
     events from the master server until the SQL thread has caught up
     and deleted some unused relay logs. Note that this limit is not
     absolute: There are cases where the SQL thread needs more events
     before it can delete relay logs. In that case, the I/O thread
     exceeds the limit until it becomes possible for the SQL thread to
     delete some relay logs because not doing so would cause a
     deadlock. You should not set `--relay-log-space-limit' to less
     than twice the value of `--max-relay-log-size' (or
     `--max-binlog-size' if `--max-relay-log-size' is 0). In that case,
     there is a chance that the I/O thread waits for free space because
     `--relay-log-space-limit' is exceeded, but the SQL thread has no
     relay log to purge and is unable to satisfy the I/O thread. This
     forces the I/O thread to ignore `--relay-log-space-limit'
     temporarily.

   *  `--replicate-do-db=DB_NAME'

     Options for replicate-do-db

     *Command-Line        `--replicate-do-db=name'        
     Format*                              
     *Option-File Format* `replicate-do-db'        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The effects of this option depend on whether statement-based or
     row-based replication is in use.

     Statement-based replication

     Tell the slave SQL thread to restrict replication to statements
     where the default database (that is, the one selected by *Note
     `USE': use.) is DB_NAME. To specify more than one database, use
     this option multiple times, once for each database; however, doing
     so does _not_ replicate cross-database statements such as `UPDATE
     SOME_DB.SOME_TABLE SET foo='bar'' while a different database (or no
     database) is selected.

     *Warning*:

     To specify multiple databases you _must_ use multiple instances of
     this option. Because database names can contain commas, if you
     supply a comma separated list then the list will be treated as the
     name of a single database.

     An example of what does not work as you might expect when using
     statement-based replication: If the slave is started with
     `--replicate-do-db=sales' and you issue the following statements
     on the master, the *Note `UPDATE': update. statement is _not_
     replicated:

          USE prices;
          UPDATE sales.january SET amount=amount+1000;

     The main reason for this `check just the default database'
     behavior is that it is difficult from the statement alone to know
     whether it should be replicated (for example, if you are using
     multiple-table *Note `DELETE': delete. statements or
     multiple-table *Note `UPDATE': update.  statements that act across
     multiple databases). It is also faster to check only the default
     database rather than all databases if there is no need.

     Row-based replication

     Tells the slave SQL thread to restrict replication to database
     DB_NAME. Only tables belonging to DB_NAME are changed; the current
     database has no effect on this. Suppose that the slave is started
     with `--replicate-do-db=sales' and row-based replication is in
     effect, and then the following statements are run on the master:

          USE prices;
          UPDATE sales.february SET amount=amount+100;

     The `february' table in the `sales' database on the slave is
     changed in accordance with the *Note `UPDATE': update.  statement;
     this occurs whether or not the *Note `USE': use. statement was
     issued.  However, issuing the following statements on the master
     has no effect on the slave when using row-based replication and
     `--replicate-do-db=sales':

          USE prices;
          UPDATE prices.march SET amount=amount-25;

     Even if the statement `USE prices' were changed to `USE sales', the
     *Note `UPDATE': update. statement's effects would still not be
     replicated.

     Another important difference in how `--replicate-do-db' is handled
     in statement-based replication as opposed to row-based replication
     occurs with regard to statements that refer to multiple databases.
     Suppose that the slave is started with `--replicate-do-db=db1',
     and the following statements are executed on the master:

          USE db1;
          UPDATE db1.table1 SET col1 = 10, db2.table2 SET col2 = 20;

     If you are using statement-based replication, then both tables are
     updated on the slave. However, when using row-based replication,
     only `table1' is affected on the slave; since `table2' is in a
     different database, `table2' on the slave is not changed by the
     *Note `UPDATE': update. Now suppose that, instead of the `USE db1'
     statement, a `USE db4' statement had been used:

          USE db4;
          UPDATE db1.table1 SET col1 = 10, db2.table2 SET col2 = 20;

     In this case, the *Note `UPDATE': update.  statement would have no
     effect on the slave when using statement-based replication.
     However, if you are using row-based replication, the *Note
     `UPDATE': update. would change `table1' on the slave, but not
     `table2'--in other words, only tables in the database named by
     `--replicate-do-db' are changed, and the choice of default
     database has no effect on this behavior.

     If you need cross-database updates to work, use
     `--replicate-wild-do-table=DB_NAME.%' instead. See *Note
     replication-rules::.

     *Note*:

     This option affects replication in the same manner that
     `--binlog-do-db' affects binary logging, and the effects of the
     replication format on how `--replicate-do-db' affects replication
     behavior are the same as those of the logging format on the
     behavior of `--binlog-do-db'.

     This option has no effect on *Note `BEGIN': commit, *Note
     `COMMIT': commit, or *Note `ROLLBACK': commit.  statements.

   *  `--replicate-ignore-db=DB_NAME'

     Options for replicate-ignore-db

     *Command-Line        `--replicate-ignore-db=name'        
     Format*                              
     *Option-File Format* `replicate-ignore-db'        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     As with `--replicate-do-db', the effects of this option depend on
     whether statement-based or row-based replication is in use.

     Statement-based replication

     Tells the slave SQL thread not to replicate any statement where
     the default database (that is, the one selected by *Note `USE':
     use.) is DB_NAME.

     Row-based replication

     Tells the slave SQL thread not to update any tables in the
     database DB_NAME. The default database has no effect.

     When using statement-based replication, the following example does
     not work as you might expect. Suppose that the slave is started
     with `--replicate-ignore-db=sales' and you issue the following
     statements on the master:

          USE prices;
          UPDATE sales.january SET amount=amount+1000;

     The *Note `UPDATE': update. statement _is_ replicated in such a
     case because `--replicate-ignore-db' applies only to the default
     database (determined by the *Note `USE': use. statement). Because
     the `sales' database was specified explicitly in the statement,
     the statement has not been filtered. However, when using row-based
     replication, the *Note `UPDATE': update. statement's effects are
     _not_ propagated to the slave, and the slave's copy of the
     `sales.january' table is unchanged; in this instance,
     `--replicate-ignore-db=sales' causes _all_ changes made to tables
     in the master's copy of the `sales' database to be ignored by the
     slave.

     To specify more than one database to ignore, use this option
     multiple times, once for each database. Because database names can
     contain commas, if you supply a comma separated list then the list
     will be treated as the name of a single database.

     You should not use this option if you are using cross-database
     updates and you do not want these updates to be replicated.  See
     *Note replication-rules::.

     If you need cross-database updates to work, use
     `--replicate-wild-ignore-table=DB_NAME.%' instead. See *Note
     replication-rules::.

     *Note*:

     This option affects replication in the same manner that
     `--binlog-ignore-db' affects binary logging, and the effects of
     the replication format on how `--replicate-ignore-db' affects
     replication behavior are the same as those of the logging format
     on the behavior of `--binlog-ignore-db'.

     This option has no effect on *Note `BEGIN': commit, *Note
     `COMMIT': commit, or *Note `ROLLBACK': commit.  statements.

   *  `--replicate-do-table=DB_NAME.TBL_NAME'

     Options for replicate-do-table

     *Command-Line        `--replicate-do-table=name'        
     Format*                              
     *Option-File Format* `replicate-do-table'        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     Tells the slave SQL thread to restrict replication to the
     specified table. To specify more than one table, use this option
     multiple times, once for each table. This works for both
     cross-database updates and default database updates, in contrast
     to `--replicate-do-db'.  See *Note replication-rules::.

     This option affects only statements that apply to tables. It does
     not affect statements that apply only to other database objects,
     such as stored routines. To filter statements operating on stored
     routines, use one or more of the `--replicate-*-db' options.

   *  `--replicate-ignore-table=DB_NAME.TBL_NAME'

     Options for replicate-ignore-table

     *Command-Line        `--replicate-ignore-table=name'        
     Format*                              
     *Option-File Format* `replicate-ignore-table'        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     Tells the slave SQL thread not to replicate any statement that
     updates the specified table, even if any other tables might be
     updated by the same statement. To specify more than one table to
     ignore, use this option multiple times, once for each table. This
     works for cross-database updates, in contrast to
     `--replicate-ignore-db'. See *Note replication-rules::.

     This option affects only statements that apply to tables. It does
     not affect statements that apply only to other database objects,
     such as stored routines. To filter statements operating on stored
     routines, use one or more of the `--replicate-*-db' options.

   *  `--replicate-rewrite-db=FROM_NAME->TO_NAME'

     Options for replicate-rewrite-db

     *Command-Line        `--replicate-rewrite-db=old_name->new_name'        
     Format*                              
     *Option-File Format* `replicate-rewrite-db'        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     Tells the slave to translate the default database (that is, the
     one selected by *Note `USE': use.) to TO_NAME if it was FROM_NAME
     on the master. Only statements involving tables are affected (not
     statements such as *Note `CREATE DATABASE': create-database, *Note
     `DROP DATABASE': drop-database, and *Note `ALTER DATABASE':
     alter-database.), and only if FROM_NAME is the default database on
     the master. To specify multiple rewrites, use this option multiple
     times. The server uses the first one with a FROM_NAME value that
     matches. The database name translation is done _before_ the
     `--replicate-*' rules are tested.

     Statements in which table names are qualified with database names
     when using this option do not work with table-level replication
     filtering options such as `--replicate-do-table'. Suppose we have
     a database named `a' on the master, one named `b' on the slave,
     each containing a table `t', and have started the master with
     `--replicate-rewrite-db='a->b''. At a later point in time, we
     execute *Note `DELETE FROM a.t': delete. In this case, no relevant
     filtering rule works, for the reasons shown here:

       1. `--replicate-do-table=a.t' does not work because the slave
          has table `t' in database `b'.

       2. `--replicate-do-table=b.t' does not match the original
          statement and so is ignored.

       3. `--replicate-do-table=*.t' is handled identically to
          `--replicate-do-table=a.t', and thus does not work, either.

     Similarly, the `--replication-rewrite-db' option does not work
     with cross-database updates.

     If you use this option on the command line and the ``>'' character
     is special to your command interpreter, quote the option value.
     For example:

          shell> mysqld --replicate-rewrite-db="OLDDB->NEWDB"

   *  `--replicate-same-server-id'

     Options for replicate-same-server-id

     *Command-Line        `--replicate-same-server-id'        
     Format*                              
     *Option-File Format* `replicate-same-server-id'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     To be used on slave servers. Usually you should use the default
     setting of 0, to prevent infinite loops caused by circular
     replication. If set to 1, the slave does not skip events having
     its own server ID. Normally, this is useful only in rare
     configurations. Cannot be set to 1 if `--log-slave-updates' is
     used. By default, the slave I/O thread does not write binary log
     events to the relay log if they have the slave's server ID (this
     optimization helps save disk usage). If you want to use
     `--replicate-same-server-id', be sure to start the slave with this
     option before you make the slave read its own events that you want
     the slave SQL thread to execute.

   *  `--replicate-wild-do-table=DB_NAME.TBL_NAME'

     Options for replicate-wild-do-table

     *Command-Line        `--replicate-wild-do-table=name'        
     Format*                              
     *Option-File Format* `replicate-wild-do-table'        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     Tells the slave thread to restrict replication to statements where
     any of the updated tables match the specified database and table
     name patterns. Patterns can contain the ``%'' and ``_'' wildcard
     characters, which have the same meaning as for the `LIKE'
     pattern-matching operator.  To specify more than one table, use
     this option multiple times, once for each table. This works for
     cross-database updates. See *Note replication-rules::.

     This option applies to tables, views, and triggers. It does not
     apply to stored procedures and functions, or events. To filter
     statements operating on the latter objects, use one or more of the
     `--replicate-*-db' options.

     Example: `--replicate-wild-do-table=foo%.bar%' replicates only
     updates that use a table where the database name starts with `foo'
     and the table name starts with `bar'.

     If the table name pattern is `%', it matches any table name and
     the option also applies to database-level statements (*Note
     `CREATE DATABASE': create-database, *Note `DROP DATABASE':
     drop-database, and *Note `ALTER DATABASE': alter-database.). For
     example, if you use `--replicate-wild-do-table=foo%.%',
     database-level statements are replicated if the database name
     matches the pattern `foo%'.

     To include literal wildcard characters in the database or table
     name patterns, escape them with a backslash. For example, to
     replicate all tables of a database that is named `my_own%db', but
     not replicate tables from the `my1ownAABCdb' database, you should
     escape the ``_'' and ``%'' characters like this:
     `--replicate-wild-do-table=my\_own\%db'.  If you use the option on
     the command line, you might need to double the backslashes or
     quote the option value, depending on your command interpreter. For
     example, with the `bash' shell, you would need to type
     `--replicate-wild-do-table=my\\_own\\%db'.

   *  `--replicate-wild-ignore-table=DB_NAME.TBL_NAME'

     Options for replicate-wild-ignore-table

     *Command-Line        `--replicate-wild-ignore-table=name'        
     Format*                              
     *Option-File Format* `replicate-wild-ignore-table'        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     Tells the slave thread not to replicate a statement where any
     table matches the given wildcard pattern. To specify more than one
     table to ignore, use this option multiple times, once for each
     table. This works for cross-database updates. See *Note
     replication-rules::.

     Example: `--replicate-wild-ignore-table=foo%.bar%' does not
     replicate updates that use a table where the database name starts
     with `foo' and the table name starts with `bar'.

     For information about how matching works, see the description of
     the `--replicate-wild-do-table' option. The rules for including
     literal wildcard characters in the option value are the same as for
     `--replicate-wild-ignore-table' as well.

   *  `--report-host=HOST_NAME'

     Options for report-host

     *Command-Line        `--report-host=host_name'        
     Format*                              
     *Option-File Format* `report-host'        
     *System Variable     `report_host'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The host name or IP address of the slave to be reported to the
     master during slave registration. This value appears in the output
     of *Note `SHOW SLAVE HOSTS': show-slave-hosts. on the master
     server. Leave the value unset if you do not want the slave to
     register itself with the master. Note that it is not sufficient
     for the master to simply read the IP address of the slave from the
     TCP/IP socket after the slave connects. Due to NAT and other
     routing issues, that IP may not be valid for connecting to the
     slave from the master or other hosts.

   *  `--report-password=PASSWORD'

     Options for report-password

     *Command-Line        `--report-password=name'        
     Format*                              
     *Option-File Format* `report-password'        
     *System Variable     `report_password'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The account password of the slave to be reported to the master
     during slave registration. This value appears in the output of
     *Note `SHOW SLAVE HOSTS': show-slave-hosts. on the master server
     if the `--show-slave-auth-info' option is given.

     Although the name of this option might imply otherwise,
     `--report-password' is not connected to the MySQL user privilege
     system and so is not necessarily (or even likely to be) the same
     as the password for the MySQL replication user account.

   *  `--report-port=SLAVE_PORT_NUM'

     Options for report-port

     *Command-Line        `--report-port=#'        
     Format*                              
     *Option-File Format* `report-port'        
     *System Variable     `report_port'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values          
                          (>=             
                          5.5.23)*        
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          65535'          

     The TCP/IP port number for connecting to the slave, to be reported
     to the master during slave registration. Set this only if the
     slave is listening on a nondefault port or if you have a special
     tunnel from the master or other clients to the slave. If you are
     not sure, do not use this option.

     Prior to MySQL 5.5.23, the default value for this option was 3306.
     In MySQL 5.5.23 and later, the value shown is the port number
     actually used by the slave (Bug #13333431). This change also
     affects the default value displayed by *Note `SHOW SLAVE HOSTS':
     show-slave-hosts.

   *  `--report-user=USER_NAME'

     Options for report-user

     *Command-Line        `--report-user=name'        
     Format*                              
     *Option-File Format* `report-user'        
     *System Variable     `report_user'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        

     The account user name of the slave to be reported to the master
     during slave registration. This value appears in the output of
     *Note `SHOW SLAVE HOSTS': show-slave-hosts. on the master server
     if the `--show-slave-auth-info' option is given.

     Although the name of this option might imply otherwise,
     `--report-user' is not connected to the MySQL user privilege
     system and so is not necessarily (or even likely to be) the same
     as the name of the MySQL replication user account.

   *  `--show-slave-auth-info'

     Options for show-slave-auth-info

     *Command-Line        `--show-slave-auth-info'        
     Format*                              
     *Option-File Format* `show-slave-auth-info'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Display slave user names and passwords in the output of *Note
     `SHOW SLAVE HOSTS': show-slave-hosts. on the master server for
     slaves started with the `--report-user' and `--report-password'
     options.

   *  `--skip-slave-start'

     Options for skip-slave-start

     *Command-Line        `--skip-slave-start'        
     Format*                              
     *Option-File Format* `skip-slave-start'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Tells the slave server not to start the slave threads when the
     server starts. To start the threads later, use a *Note `START
     SLAVE': start-slave. statement.

   *  `--slave_compressed_protocol={0|1}'

     Options for slave_compressed_protocol

     *Command-Line        `--slave_compressed_protocol'        
     Format*                              
     *Option-File Format* `slave_compressed_protocol'        
     *System Variable     `slave_compressed_protocol'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     If this option is set to 1, use compression for the slave/master
     protocol if both the slave and the master support it. The default
     is 0 (no compression).

   *  `--slave-load-tmpdir=FILE_NAME'

     Options for slave-load-tmpdir

     *Command-Line        `--slave-load-tmpdir=path'        
     Format*                              
     *Option-File Format* `slave-load-tmpdir'        
     *System Variable     `slave_load_tmpdir'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           
     *Default*            `/tmp'          

     The name of the directory where the slave creates temporary files.
     This option is by default equal to the value of the `tmpdir'
     system variable. When the slave SQL thread replicates a *Note
     `LOAD DATA INFILE': load-data. statement, it extracts the file to
     be loaded from the relay log into temporary files, and then loads
     these into the table. If the file loaded on the master is huge, the
     temporary files on the slave are huge, too. Therefore, it might be
     advisable to use this option to tell the slave to put temporary
     files in a directory located in some file system that has a lot of
     available space. In that case, the relay logs are huge as well, so
     you might also want to use the `--relay-log' option to place the
     relay logs in that file system.

     The directory specified by this option should be located in a
     disk-based file system (not a memory-based file system) because
     the temporary files used to replicate *Note `LOAD DATA INFILE':
     load-data. must survive machine restarts. The directory also
     should not be one that is cleared by the operating system during
     the system startup process.

   *  `--slave-net-timeout=SECONDS'

     Options for slave-net-timeout

     *Command-Line        `--slave-net-timeout=#'        
     Format*                              
     *Option-File Format* `slave-net-timeout'        
     *System Variable     `slave_net_timeout'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `3600'          
     *Min Value*          `1'             

     The number of seconds to wait for more data from the master before
     the slave considers the connection broken, aborts the read, and
     tries to reconnect. The first retry occurs immediately after the
     timeout. The interval between retries is controlled by the
     `MASTER_CONNECT_RETRY' option for the *Note `CHANGE MASTER TO':
     change-master-to.  statement, and the number of reconnection
     attempts is limited by the `--master-retry-count' option. The
     default is 3600 seconds (one hour).

   *  `--slave-skip-errors=[ERR_CODE1,ERR_CODE2,...|all]'

     (_MySQL Cluster NDB 7.2.6 and later:)_
     `--slave-skip-errors=[ERR_CODE1,ERR_CODE2,...|all|ddl_exist_errors]'

     Options for slave-skip-errors

     *Command-Line        `--slave-skip-errors=name'        
     Format*                              
     *Option-File Format* `slave-skip-errors'        
     *System Variable     `slave_skip_errors'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `OFF'           
     *Valid Values*       `[list          
                          of              
                          error           
                          codes]'         
     `all'                                
     `ddl_exist_errors'                   

     Normally, replication stops when an error occurs on the slave.
     This gives you the opportunity to resolve the inconsistency in the
     data manually. This option tells the slave SQL thread to continue
     replication when a statement returns any of the errors listed in
     the option value.

     Do not use this option unless you fully understand why you are
     getting errors. If there are no bugs in your replication setup and
     client programs, and no bugs in MySQL itself, an error that stops
     replication should never occur. Indiscriminate use of this option
     results in slaves becoming hopelessly out of synchrony with the
     master, with you having no idea why this has occurred.

     For error codes, you should use the numbers provided by the error
     message in your slave error log and in the output of *Note `SHOW
     SLAVE STATUS': show-slave-status.  *Note error-handling::, lists
     server error codes.

     You can also (but should not) use the very nonrecommended value of
     `all' to cause the slave to ignore all error messages and keeps
     going regardless of what happens.  Needless to say, if you use
     `all', there are no guarantees regarding the integrity of your
     data. Please do not complain (or file bug reports) in this case if
     the slave's data is not anywhere close to what it is on the master.
     _You have been warned_.

     MySQL Cluster NDB 7.2.6 and later support an additional shorthand
     value `ddl_exist_errors' for use with the enhanced failover
     mechanism which is implemented beginning with that version of
     MySQL Cluster. This value is equivalent to the error code list
     `1007,1008,1050,1051,1054,1060,1061,1068,1094,1146'.  _This value
     is not supported by the *Note `mysqld': mysqld. binary included
     with the MySQL Server 5.5 distribution_. (Bug #11762277, Bug
     #54854) For more information, see *Note
     mysql-cluster-replication-failover::.

     Examples:

          --slave-skip-errors=1062,1053
          --slave-skip-errors=all
          --slave-skip-errors=ddl_exist_errors

Obsolete options

_The following options are removed in MySQL 5.5. If you attempt to start
*Note `mysqld': mysqld. with any of these options in MySQL 5.5, the
server aborts with an `unknown variable' error_. To set the replication
parameters formerly associated with these options, you must use the
`CHANGE MASTER TO ...' statement (see *Note change-master-to::).

The options affected are shown in this list:

   *  `--master-host'

   *  `--master-user'

   *  `--master-password'

   *  `--master-port'

   *  `--master-connect-retry'

   *  `--master-ssl'

   *  `--master-ssl-ca'

   *  `--master-ssl-capath'

   *  `--master-ssl-cert'

   *  `--master-ssl-cipher'

   *  `--master-ssl-key'

System variables used on replication slaves

The following list describes system variables for controlling
replication slave servers. They can be set at server startup and some
of them can be changed at runtime using *Note `SET': set-statement.
Server options used with replication slaves are listed earlier in this
section.

   *  `init_slave'

     Options for init_slave

     *Command-Line        `--init-slave=name'        
     Format*                              
     *Option-File Format* `init_slave'        
     *System Variable     `init_slave'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        

     This variable is similar to `init_connect', but is a string to be
     executed by a slave server each time the SQL thread starts. The
     format of the string is the same as for the `init_connect'
     variable.

     *Note*:

     The SQL thread sends an acknowledgment to the client before it
     executes `init_slave'.  Therefore, it is not guaranteed that
     `init_slave' has been executed when *Note `START SLAVE':
     start-slave.  returns. See *Note start-slave::, for more
     information.

   *  `relay_log'

     Options for relay-log

     *Command-Line        `--relay-log=name'        
     Format*                              
     *Option-File Format* `relay-log'        
     *System Variable     `relay_log'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The name of the relay log file.

   *  `relay_log_index'

     Options for relay_log_index

     *Command-Line        `--relay-log-index'        
     Format*                              
     *Option-File Format* `relay_log_index'        
     *System Variable     `relay_log_index'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `*host_name*-relay-bin.index'        

     The name of the relay log index file. The default name is
     `HOST_NAME-relay-bin.index' in the data directory, where HOST_NAME
     is the name of the slave server.

   *  `relay_log_info_file'

     Options for relay_log_info_file

     *Command-Line        `--relay-log-info-file=file_name'        
     Format*                              
     *Option-File Format* `relay_log_info_file'        
     *System Variable     `relay_log_info_file'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `relay-log.info'        

     The name of the file in which the slave records information about
     the relay logs. The default name is `relay-log.info' in the data
     directory.

   *  `relay_log_recovery'

     Options for relay_log_recovery

     *Command-Line        `--relay-log-recovery'        
     Format*                              
     *Option-File Format* `relay_log_recovery'        
     *System Variable     `relay_log_recovery'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Enables automatic relay log recovery immediately following server
     startup, which means that the replication slave discards all
     unprocessed relay logs and retrieves them from the replication
     master. This should be used following a crash on the replication
     slave to ensure that no possibly corrupted relay logs are
     processed. The default value is 0 (disabled).  This global
     variable can be changed dynamically, or by starting the slave with
     the `--relay-log-recovery' option.

   *  `rpl_recovery_rank'

     This variable is unused, and is removed in MySQL 5.6.

   *  `slave_compressed_protocol'

     Options for slave_compressed_protocol

     *Command-Line        `--slave_compressed_protocol'        
     Format*                              
     *Option-File Format* `slave_compressed_protocol'        
     *System Variable     `slave_compressed_protocol'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Whether to use compression of the slave/master protocol if both
     the slave and the master support it.

   *  `slave_exec_mode'

     Options for slave_exec_mode

     *Command-Line        `--slave-exec-mode=mode'        
     Format*                              
     *Option-File Format* `slave_exec_mode'        
     *System Variable     `slave_exec_mode'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `STRICT'        
                          (ALL)           
     *Default*            `IDEMPOTENT'        
                          (NDB)           
     *Valid Values*       `IDEMPOTENT'        
     `STRICT'                             

     Controls whether `IDEMPOTENT' or `STRICT' mode is used in
     replication conflict resolution and error checking. `IDEMPOTENT'
     mode causes suppression of duplicate-key and no-key-found errors.
     This mode should be employed in multi-master replication, circular
     replication, and some other special replication scenarios.
     `STRICT' mode is the default, and is suitable for most other cases.

     *Note*:

     MySQL Cluster ignores any value explicitly set for
     `slave_exec_mode', and always treats it as `IDEMPOTENT'.

   *  `slave_load_tmpdir'

     Options for slave-load-tmpdir

     *Command-Line        `--slave-load-tmpdir=path'        
     Format*                              
     *Option-File Format* `slave-load-tmpdir'        
     *System Variable     `slave_load_tmpdir'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           
     *Default*            `/tmp'          

     The name of the directory where the slave creates temporary files
     for replicating *Note `LOAD DATA INFILE': load-data. statements.

   *  `slave_max_allowed_packet'

     Options for slave_max_allowed_packet

     *Introduced*         5.5.26          
     *System Variable     `slave_max_allowed_packet'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1073741824'        
     *Range*              `1024           
                          ..              
                          1073741824'        

     In MySQL 5.5.26 and later, this variable sets the maximum packet
     size for the slave SQL and I/O threads, so that large updates
     using row-based replication do not cause replication to fail
     because an update exceeded `max_allowed_packet'.

     This global variable always has a value that is a positive integer
     multiple of 1024; if you set it to some value that is not, the
     value is rounded down to the next highest multiple of 1024 for it
     is stored or used; setting `slave_max_allowed_packet' to 0 causes
     1024 to be used. (A truncation warning is issued in all such
     cases.) The default and maximum value is 1073741824 (1 GB); the
     minimum is 1024.

     `slave_max_allowed_packet' can also be set at startup, using the
     `--slave-max-allowed-packet' option.

   *  `slave_net_timeout'

     Options for slave-net-timeout

     *Command-Line        `--slave-net-timeout=#'        
     Format*                              
     *Option-File Format* `slave-net-timeout'        
     *System Variable     `slave_net_timeout'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `3600'          
     *Min Value*          `1'             

     The number of seconds to wait for more data from a master/slave
     connection before aborting the read.

   *  `slave_skip_errors'

     Options for slave-skip-errors

     *Command-Line        `--slave-skip-errors=name'        
     Format*                              
     *Option-File Format* `slave-skip-errors'        
     *System Variable     `slave_skip_errors'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `OFF'           
     *Valid Values*       `[list          
                          of              
                          error           
                          codes]'         
     `all'                                
     `ddl_exist_errors'                   

     Normally, replication stops when an error occurs on the slave.
     This gives you the opportunity to resolve the inconsistency in the
     data manually. This variable tells the slave SQL thread to
     continue replication when a statement returns any of the errors
     listed in the variable value.

   *  `slave_transaction_retries'

     Options for slave_transaction_retries

     *Command-Line        `--slave_transaction_retries=#'        
     Format*                              
     *Option-File Format* `slave_transaction_retries'        
     *System Variable     `slave_transaction_retries'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `10'            
     *Range*              `0 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `10'            
     *Range*              `0 ..           
                          18446744073709547520'        

     If a replication slave SQL thread fails to execute a transaction
     because of an *Note `InnoDB': innodb-storage-engine.  deadlock or
     because the transaction's execution time exceeded *Note `InnoDB':
     innodb-storage-engine.'s `innodb_lock_wait_timeout' or *Note
     `NDBCLUSTER': mysql-cluster.'s
     `TransactionDeadlockDetectionTimeout' or
     `TransactionInactiveTimeout', it automatically retries
     `slave_transaction_retries' times before stopping with an error.
     The default value is 10.

   *  `slave_type_conversions'

     Options for slave_type_conversions

     *Introduced*         5.5.3           
     *Command-Line        `--slave_type_conversions=set'        
     Format*                              
     *Option-File Format* `slave_type_conversions'        
     *System Variable     `slave_type_conversions'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `set'           
     *Default*            `'              
     *Valid Values*       `ALL_LOSSY'        
     `ALL_NON_LOSSY'                      

     Controls the type conversion mode in effect on the slave when
     using row-based replication, including MySQL Cluster Replication.
     Its value is a comma-delimited set of zero or more elements from
     the list: `ALL_LOSSY', `ALL_NON_LOSSY'. Set this variable to an
     empty string to disallow type conversions between the master and
     the slave. Changes require a restart of the slave to take effect.

     For additional information on type conversion modes applicable to
     attribute promotion and demotion in row-based replication, see
     *Note replication-features-attribute-promotion::.

     This variable was added in MySQL 5.5.3.

   *  `sql_slave_skip_counter'

     Options for sql_slave_skip_counter

     *System Variable     `sql_slave_skip_counter'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        

     The number of events from the master that a slave server should
     skip.

     *Important*:

     If skipping the number of events specified by setting this
     variable would cause the slave to begin in the middle of an event
     group, the slave continues to skip until it finds the beginning of
     the next event group and begins from that point. For more
     information, see *Note set-global-sql-slave-skip-counter::.

   *  `sync_master_info'

     Options for sync_master_info

     *Command-Line        `--sync-master-info=#'        
     Format*                              
     *Option-File Format* `sync_master_info'        
     *System Variable     `sync_master_info'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          18446744073709547520'        

     If the value of this variable is greater than 0, a replication
     slave synchronizes its `master.info' file to disk (using
     `fdatasync()') after every `sync_master_info' events. The default
     value is 0 (recommended in most situations), which does not force
     any synchronization to disk by the MySQL server; in this case, the
     server relies on the operating system to flush the `master.info'
     file's contents from time to time as for any other file.

   *  `sync_relay_log'

     Options for sync_relay_log

     *Command-Line        `--sync-relay-log=#'        
     Format*                              
     *Option-File Format* `sync_relay_log'        
     *System Variable     `sync_relay_log'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          18446744073709547520'        

     If the value of this variable is greater than 0, the MySQL server
     synchronizes its relay log to disk (using `fdatasync()') after
     every `sync_relay_log' writes to the relay log. There is one write
     to the relay log per statement if autocommit is enabled, and one
     write per transaction otherwise. The default value of
     `sync_relay_log' is 0, which does no synchronizing to disk--in
     this case, the server relies on the operating system to flush the
     relay log's contents from time to time as for any other file. A
     value of 1 is the safest choice because in the event of a crash
     you lose at most one statement or transaction from the relay log.
     However, it is also the slowest choice (unless the disk has a
     battery-backed cache, which makes synchronization very fast).

   *  `sync_relay_log_info'

     Options for sync_relay_log_info

     *Command-Line        `--sync-relay-log-info=#'        
     Format*                              
     *Option-File Format* `sync_relay_log_info'        
     *System Variable     `sync_relay_log_info'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          18446744073709547520'        

     If the value of this variable is greater than 0, a replication
     slave synchronizes its `relay-log.info' file to disk (using
     `fdatasync()') after every `sync_relay_log_info' transactions. A
     value of 1 is the generally the best choice.  The default value of
     `sync_relay_log_info' is 0, which does not force any
     synchronization to disk by the MySQL server--in this case, the
     server relies on the operating system to flush the `relay-log.info'
     file's contents from time to time as for any other file.


File: manual.info,  Node: replication-options-binary-log,  Prev: replication-options-slave,  Up: replication-options

16.1.3.4 Binary Log Options and Variables
.........................................

You can use the *Note `mysqld': mysqld. options and system variables
that are described in this section to affect the operation of the
binary log as well as to control which statements are written to the
binary log. For additional information about the binary log, see *Note
binary-log::. For additional information about using MySQL server
options and system variables, see *Note server-options::, and *Note
server-system-variables::.

Startup options used with binary logging

The following list describes startup options for enabling and
configuring the binary log. System variables used with binary logging
are discussed later in this section.

   *  `--binlog-row-event-max-size=N'

     Options for binlog-row-event-max-size

     *Command-Line        `--binlog-row-event-max-size=#'        
     Format*                              
     *Option-File Format* `binlog-row-event-max-size'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `1024'          
     *Range*              `256            
                          ..              
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `1024'          
     *Range*              `256            
                          ..              
                          18446744073709547520'        

     Specify the maximum size of a row-based binary log event, in
     bytes. Rows are grouped into events smaller than this size if
     possible. The value should be a multiple of 256. The default is
     1024. See *Note replication-formats::.

   *  `--log-bin[=BASE_NAME]'

     Options for log-bin

     *Command-Line        `--log-bin'        
     Format*                              
     *Option-File Format* `log-bin'        
     *System Variable     `log_bin'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     Enable binary logging. The server logs all statements that change
     data to the binary log, which is used for backup and replication.
     See *Note binary-log::.

     The option value, if given, is the basename for the log sequence.
     The server creates binary log files in sequence by adding a
     numeric suffix to the basename. It is recommended that you specify
     a basename (see *Note bugs::, for the reason). Otherwise, MySQL
     uses `HOST_NAME-bin' as the basename.

     In MySQL 5.5.20 and later, when the server reads an entry from the
     index file, it checks whether the entry contains a relative path,
     and if it does, the relative part of the path in replaced with the
     absolute path set using the `--log-bin' option. An absolute path
     remains unchanged; in such a case, the index must be edited
     manually to enable the new path or paths to be used. Previous to
     MySQL 5.5.20, manual intervention was required whenever relocating
     the binary log or relay log files. (Bug #11745230, Bug #12133)

     Setting this option causes the `log_bin' system variable to be set
     to `ON' (or `1'), and not to the basename. This is a known issue;
     see Bug #19614 for more information.

   *  `--log-bin-index[=FILE_NAME]'

     Options for log-bin-index

     *Command-Line        `--log-bin-index=name'        
     Format*                              
     *Option-File Format* `log-bin-index'        
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           

     The index file for binary log file names. See *Note binary-log::.
     If you omit the file name, and if you did not specify one with
     `--log-bin', MySQL uses `HOST_NAME-bin.index' as the file name.

   *  `--log-bin-trust-function-creators[={0|1}]'

     Options for log-bin-trust-function-creators

     *Command-Line        `--log-bin-trust-function-creators'        
     Format*                              
     *Option-File Format* `log-bin-trust-function-creators'        
     *System Variable     `log_bin_trust_function_creators'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     This option sets the corresponding
     `log_bin_trust_function_creators' system variable. If no argument
     is given, the option sets the variable to 1.
     `log_bin_trust_function_creators' affects how MySQL enforces
     restrictions on stored function and trigger creation. See *Note
     stored-programs-logging::.

   *  `--log-bin-use-v1-row-events[={0|1}]'

     Options for log-bin-use-v1-row-events

     *Introduced*         5.5.15-ndb-7.2.1        
     *Command-Line        `--log-bin-use-v1-row-events[={0|1}]'        
     Format*                              
     *Option-File Format* `log-bin-use-v1-row-events'        
     *System Variable     `log_bin_use_v1_row_events'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `0'             

     Version 2 binary log row events are used by default beginning with
     MySQL Cluster NDB 7.2.1; however, Version 2 events cannot be read
     by previous MySQL Cluster releases. Setting
     `--log-bin-use-v1-row-events' to 1 causes *Note `mysqld': mysqld.
     to write the binary log using Version 1 logging events, which is
     the only version of binary log events used in previous releases,
     and thus produce binary logs that can be read by older slaves.

     The value used for this option can be obtained from the read-only
     `log_bin_use_v1_row_events' system variable.

     `--log-bin-use-v1-row-events' is chiefly of interest when setting
     up replication conflict detection and resolution using
     `NDB$EPOCH_TRANS()' as the conflict detection function, which
     requires Version 2 binary log row events. Thus, this option and
     `--ndb-log-transaction-id' are not compatible.

     *Note*:

     Version 2 binary log row events are also available in MySQL
     Cluster NDB 7.0.27 and MySQL Cluster NDB 7.1.6 and later MySQL
     Cluster NDB 7.0 and 7.1 releases. However, prior to MySQL Cluster
     NDB 7.2.1, Version 1 events are the default (and so the default
     value for this option is 1 in those versions). You should keep
     this mind when planning upgrades for setups using MySQL Cluster
     Replication.

     `--log-bin-use-v1-row-events' is not supported in mainline MySQL
     Server 5.5 releases.

     For more information, see *Note
     mysql-cluster-replication-conflict-resolution::.

   * `--log-short-format'

     Options for log-short-format

     *Command-Line        `--log-short-format'        
     Format*                              
     *Option-File Format* `log-short-format'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Log less information to the binary log and slow query log, if they
     have been activated.

Statement selection options

The options in the following list affect which statements are written
to the binary log, and thus sent by a replication master server to its
slaves. There are also options for slave servers that control which
statements received from the master should be executed or ignored. For
details, see *Note replication-options-slave::.

   *  `--binlog-do-db=DB_NAME'

     Options for binlog-do-db

     *Command-Line        `--binlog-do-db=name'        
     Format*                              
     *Option-File Format* `binlog-do-db'        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     This option affects binary logging in a manner similar to the way
     that `--replicate-do-db' affects replication.

     The effects of this option depend on whether the statement-based
     or row-based logging format is in use, in the same way that the
     effects of `--replicate-do-db' depend on whether statement-based
     or row-based replication is in use.  You should keep in mind that
     the format used to log a given statement may not necessarily be
     the same as that indicated by the value of `binlog_format'.  For
     example, DDL statements such as *Note `CREATE TABLE':
     create-table. and *Note `ALTER TABLE': alter-table. are always
     logged as statements, without regard to the logging format in
     effect, so the following statement-based rules for
     `--binlog-do-db' always apply in determining whether or not the
     statement is logged.

     Statement-based logging

     Only those statements are written to the binary log where the
     default database (that is, the one selected by *Note `USE': use.)
     is DB_NAME. To specify more than one database, use this option
     multiple times, once for each database; however, doing so does
     _not_ cause cross-database statements such as `UPDATE
     SOME_DB.SOME_TABLE SET foo='bar'' to be logged while a different
     database (or no database) is selected.

     *Warning*:

     To specify multiple databases you _must_ use multiple instances of
     this option. Because database names can contain commas, the list
     will be treated as the name of a single database if you supply a
     comma-separated list.

     An example of what does not work as you might expect when using
     statement-based logging: If the server is started with
     `--binlog-do-db=sales' and you issue the following statements, the
     *Note `UPDATE': update. statement is _not_ logged:

          USE prices;
          UPDATE sales.january SET amount=amount+1000;

     The main reason for this `just check the default database'
     behavior is that it is difficult from the statement alone to know
     whether it should be replicated (for example, if you are using
     multiple-table *Note `DELETE': delete. statements or
     multiple-table *Note `UPDATE': update.  statements that act across
     multiple databases). It is also faster to check only the default
     database rather than all databases if there is no need.

     Another case which may not be self-evident occurs when a given
     database is replicated even though it was not specified when
     setting the option. If the server is started with
     `--binlog-do-db=sales', the following *Note `UPDATE': update.
     statement is logged even though `prices' was not included when
     setting `--binlog-do-db':


          USE sales;
          UPDATE prices.discounts SET percentage = percentage + 10;

     Because `sales' is the default database when the *Note `UPDATE':
     update. statement is issued, the *Note `UPDATE': update. is logged.

     Row-based logging

     Logging is restricted to database DB_NAME. Only changes to tables
     belonging to DB_NAME are logged; the default database has no
     effect on this. Suppose that the server is started with
     `--binlog-do-db=sales' and row-based logging is in effect, and
     then the following statements are executed:

          USE prices;
          UPDATE sales.february SET amount=amount+100;

     The changes to the `february' table in the `sales' database are
     logged in accordance with the *Note `UPDATE': update. statement;
     this occurs whether or not the *Note `USE': use.  statement was
     issued. However, when using the row-based logging format and
     `--binlog-do-db=sales', changes made by the following *Note
     `UPDATE': update.  are not logged:

          USE prices;
          UPDATE prices.march SET amount=amount-25;

     Even if the `USE prices' statement were changed to `USE sales', the
     *Note `UPDATE': update. statement's effects would still not be
     written to the binary log.

     Another important difference in `--binlog-do-db' handling for
     statement-based logging as opposed to the row-based logging occurs
     with regard to statements that refer to multiple databases.
     Suppose that the server is started with `--binlog-do-db=db1', and
     the following statements are executed:

          USE db1;
          UPDATE db1.table1 SET col1 = 10, db2.table2 SET col2 = 20;

     If you are using statement-based logging, the updates to both
     tables are written to the binary log. However, when using the
     row-based format, only the changes to `table1' are logged;
     `table2' is in a different database, so it is not changed by the
     *Note `UPDATE': update. Now suppose that, instead of the `USE db1'
     statement, a `USE db4' statement had been used:

          USE db4;
          UPDATE db1.table1 SET col1 = 10, db2.table2 SET col2 = 20;

     In this case, the *Note `UPDATE': update.  statement is not
     written to the binary log when using statement-based logging.
     However, when using row-based logging, the change to `table1' is
     logged, but not that to `table2'--in other words, only changes to
     tables in the database named by `--binlog-do-db' are logged, and
     the choice of default database has no effect on this behavior.

   *  `--binlog-ignore-db=DB_NAME'

     Options for binlog-ignore-db

     *Command-Line        `--binlog-ignore-db=name'        
     Format*                              
     *Option-File Format* `binlog-ignore-db'        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     This option affects binary logging in a manner similar to the way
     that `--replicate-ignore-db' affects replication.

     The effects of this option depend on whether the statement-based
     or row-based logging format is in use, in the same way that the
     effects of `--replicate-ignore-db' depend on whether
     statement-based or row-based replication is in use.  You should
     keep in mind that the format used to log a given statement may not
     necessarily be the same as that indicated by the value of
     `binlog_format'.  For example, DDL statements such as *Note
     `CREATE TABLE': create-table. and *Note `ALTER TABLE':
     alter-table. are always logged as statements, without regard to
     the logging format in effect, so the following statement-based
     rules for `--binlog-ignore-db' always apply in determining whether
     or not the statement is logged.

     Statement-based logging

     Tells the server to not log any statement where the default
     database (that is, the one selected by *Note `USE': use.) is
     DB_NAME.

     Prior to MySQL 5.5.32, this option caused any statements
     containing fully qualified table names not to be logged if there
     was no default database specified (that is, when *Note `SELECT':
     select.  `DATABASE()' returned `NULL'). In MySQL 5.5.32 and later,
     when there is no default database, no `--binlog-ignore-db' options
     are applied, and such statements are always logged. (Bug
     #11829838, Bug #60188)

     Row-based format

     Tells the server not to log updates to any tables in the database
     DB_NAME. The current database has no effect.

     When using statement-based logging, the following example does not
     work as you might expect. Suppose that the server is started with
     `--binlog-ignore-db=sales' and you issue the following statements:

          USE prices;
          UPDATE sales.january SET amount=amount+1000;

     The *Note `UPDATE': update. statement _is_ logged in such a case
     because `--binlog-ignore-db' applies only to the default database
     (determined by the *Note `USE': use. statement). Because the
     `sales' database was specified explicitly in the statement, the
     statement has not been filtered. However, when using row-based
     logging, the *Note `UPDATE': update. statement's effects are _not_
     written to the binary log, which means that no changes to the
     `sales.january' table are logged; in this instance,
     `--binlog-ignore-db=sales' causes _all_ changes made to tables in
     the master's copy of the `sales' database to be ignored for
     purposes of binary logging.

     To specify more than one database to ignore, use this option
     multiple times, once for each database. Because database names can
     contain commas, the list will be treated as the name of a single
     database if you supply a comma-separated list.

     You should not use this option if you are using cross-database
     updates and you do not want these updates to be logged.

Testing and debugging options

The following binary log options are used in replication testing and
debugging. They are not intended for use in normal operations.

   *  `--max-binlog-dump-events=N'

     Options for max-binlog-dump-events

     *Command-Line        `--max-binlog-dump-events=#'        
     Format*                              
     *Option-File Format* `max-binlog-dump-events'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             

     This option is used internally by the MySQL test suite for
     replication testing and debugging.

   *  `--sporadic-binlog-dump-fail'

     Options for sporadic-binlog-dump-fail

     *Command-Line        `--sporadic-binlog-dump-fail'        
     Format*                              
     *Option-File Format* `sporadic-binlog-dump-fail'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     This option is used internally by the MySQL test suite for
     replication testing and debugging.

System variables used with the binary log

The following list describes system variables for controlling binary
logging. They can be set at server startup and some of them can be
changed at runtime using *Note `SET': set-statement.  Server options
used to control binary logging are listed earlier in this section.

   *  `binlog_cache_size'

     Options for binlog_cache_size

     *Command-Line        `--binlog_cache_size=#'        
     Format*                              
     *Option-File Format* `binlog_cache_size'        
     *System Variable     `binlog_cache_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `32768'         
     *Range*              `4096           
                          ..              
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `32768'         
     *Range*              `4096           
                          ..              
                          18446744073709547520'        

     The size of the cache to hold changes to the binary log during a
     transaction. A binary log cache is allocated for each client if
     the server supports any transactional storage engines and if the
     server has the binary log enabled (`--log-bin' option). If you
     often use large transactions, you can increase this cache size to
     get better performance. The `Binlog_cache_use' and
     `Binlog_cache_disk_use' status variables can be useful for tuning
     the size of this variable.  See *Note binary-log::.

     In MySQL 5.5.3, a separate binary log cache (the binary log
     statement cache) was introduced for nontransactional statements
     and in MySQL 5.5.3 through 5.5.8, this variable sets.the size for
     both caches. This means that, in these MySQL versions, the total
     memory used for these caches is double the value set for
     `binlog_cache_size'.

     Beginning with MySQL 5.5.9, `binlog_cache_size' sets the size for
     the transaction cache only, and the size of the statement cache is
     governed by the `binlog_stmt_cache_size' system variable.

   *  `binlog_direct_non_transactional_updates'

     Options for binlog_direct_non_transactional_updates

     *Introduced*         5.5.2           
     *Command-Line        `--binlog_direct_non_transactional_updates[=value]'        
     Format*                              
     *Option-File Format* `binlog_direct_non_transactional_updates'        
     *System Variable     `binlog_direct_non_transactional_updates'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Due to concurrency issues, a slave can become inconsistent when a
     transaction contains updates to both transactional and
     nontransactional tables. MySQL tries to preserve causality among
     these statements by writing nontransactional statements to the
     transaction cache, which is flushed upon commit.  However,
     problems arise when modifications done to nontransactional tables
     on behalf of a transaction become immediately visible to other
     connections because these changes may not be written immediately
     into the binary log.

     Beginning with MySQL 5.5.2, the
     `binlog_direct_non_transactional_updates' variable offers one
     possible workaround to this issue. By default, this variable is
     disabled. Enabling `binlog_direct_non_transactional_updates'
     causes updates to nontransactional tables to be written directly
     to the binary log, rather than to the transaction cache.

     _`binlog_direct_non_transactional_updates' works only for
     statements that are replicated using the statement-based binary
     logging format_; that is, it works only when the value of
     `binlog_format' is `STATEMENT', or when `binlog_format' is `MIXED'
     and a given statement is being replicated using the
     statement-based format. This variable has no effect when the
     binary log format is `ROW', or when `binlog_format' is set to
     `MIXED' and a given statement is replicated using the row-based
     format.

     *Important*:

     Before enabling this variable, you must make certain that there
     are no dependencies between transactional and nontransactional
     tables; an example of such a dependency would be the statement
     `INSERT INTO MYISAM_TABLE SELECT * FROM INNODB_TABLE'.  Otherwise,
     such statements are likely to cause the slave to diverge from the
     master.

     Beginning with MySQL 5.5.5, this variable has no effect when the
     binary log format is `ROW' or `MIXED'. (Bug #51291)

   *  `binlog_format'

     Options for binlog-format

     *Command-Line        `--binlog-format=format'        
     Format*                              
     *Option-File Format* `binlog-format'        
     *System Variable     `binlog_format'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `STATEMENT'        
     *Valid Values*       `ROW'           
     `STATEMENT'                          
     `MIXED'                              

     This variable sets the binary logging format, and can be any one
     of `STATEMENT', `ROW', or `MIXED'. See *Note replication-formats::.
     `binlog_format' is set by the `--binlog-format' option at startup,
     or by the `binlog_format' system variable at runtime.

     *Note*:

     While you can change the logging format at runtime, it is _not_
     recommended that you change it while replication is ongoing. This
     is due in part to the fact that slaves do not honor the master's
     `binlog_format' setting; a given MySQL Server can change only its
     own logging format.

     In MySQL 5.5, the default format is `STATEMENT'.

     Exception

     In MySQL Cluster NDB 7.2.1 through MySQL Cluster NDB 7.2.12, the
     default for this variable is `STATEMENT'. In MySQL Cluster NDB
     7.2.13 and later, when the *Note `NDB': mysql-cluster. storage
     engine is enabled, the default is `MIXED'.  (Bug #16417224) See
     also *Note mysql-cluster-replication-starting::, and *Note
     mysql-cluster-replication-two-channels::.

     You must have the `SUPER' privilege to set either the global or
     session `binlog_format' value.

     The rules governing when changes to this variable take effect and
     how long the effect lasts are the same as for other MySQL server
     system variables. See *Note set-statement::, for more information.

     When `MIXED' is specified, statement-based replication is used,
     except for cases where only row-based replication is guaranteed to
     lead to proper results. For example, this happens when statements
     contain user-defined functions (UDF) or the `UUID()' function. An
     exception to this rule is that `MIXED' always uses statement-based
     replication for stored functions and triggers.

     There are exceptions when you cannot switch the replication format
     at runtime:

        * From within a stored function or a trigger.

        * If the session is currently in row-based replication mode and
          has open temporary tables.

        * Beginning with MySQL 5.5.3, within a transaction. (Bug #47863)

     Trying to switch the format in those cases results in an error.

     *Note*:

     Prior to MySQL Cluster NDB 7.2.1, it was also not possible to
     change the binary logging format at runtime when the *Note
     `NDBCLUSTER': mysql-cluster. storage engine was enabled. In MySQL
     Cluster NDB 7.2.1 and later, this restriction is removed.

     The binary log format affects the behavior of the following server
     options:

        * `--replicate-do-db'

        * `--replicate-ignore-db'

        * `--binlog-do-db'

        * `--binlog-ignore-db'

     These effects are discussed in detail in the descriptions of the
     individual options.

   *  `binlog_stmt_cache_size'

     Options for binlog_stmt_cache_size

     *Introduced*         5.5.9           
     *Command-Line        `--binlog_stmt_cache_size=#'        
     Format*                              
     *Option-File Format* `binlog_stmt_cache_size'        
     *System Variable     `binlog_stmt_cache_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `32768'         
     *Range*              `4096           
                          ..              
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `32768'         
     *Range*              `4096           
                          ..              
                          18446744073709547520'        

     Beginning with MySQL 5.5.9, this variable determines the size of
     the cache for the binary log to hold nontransactional statements
     issued during a transaction. In MySQL 5.5.3 and later, separate
     binary log transaction and statement caches are allocated for each
     client if the server supports any transactional storage engines
     and if the server has the binary log enabled (`--log-bin' option).
     If you often use large nontransactional statements during
     transactions, you can increase this cache size to get more
     performance. The `Binlog_stmt_cache_use' and
     `Binlog_stmt_cache_disk_use' status variables can be useful for
     tuning the size of this variable. See *Note binary-log::.

     In MySQL 5.5.3 through 5.5.8, the size for both caches is set
     using `binlog_cache_size'. This means that, in these MySQL
     versions, the total memory used for these caches is double the
     value set for `binlog_cache_size'. Beginning with MySQL 5.5.9,
     `binlog_cache_size' sets the size for the transaction cache only.

   *  `log_bin'

     Options for log_bin

     *System Variable     `log_bin'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              

     Whether the binary log is enabled. If the `--log-bin' option is
     used, then the value of this variable is `ON'; otherwise it is
     `OFF'. This variable reports only on the status of binary logging
     (enabled or disabled); it does not actually report the value to
     which `--log-bin' is set.

     See *Note binary-log::.

   *  `log_bin_use_v1_row_events'

     Options for log_bin_use_v1_row_events

     *Introduced*         5.5.15-ndb-7.2.1        
     *Command-Line        `--log-bin-use-v1-row-events[={0|1}]'        
     Format*                              
     *Option-File Format* `log_bin_use_v1_row_events'        
     *System Variable     `log_bin_use_v1_row_events'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `0'             

     Shows whether Version 2 binary logging, available beginning with
     MySQL Cluster NDB 7.2.1, is in use. A value of 1 shows that the
     server is writing the binary log using Version 1 logging events
     (the only version of binary log events used in previous releases),
     and thus producing a binary log that can be read by older slaves.
     0 indicates that Version 2 binary log events are in use.

     This variable is read-only. To switch between Version 1 and
     Version 2 binary event binary logging, it is necessary to restart
     *Note `mysqld': mysqld. with the `--log-bin-use-v1-row-events'
     option.

     Other than when performing upgrades of MySQL Cluster Replication,
     `--log-bin-use-v1-events' is chiefly of interest when setting up
     replication conflict detection and resolution using
     `NDB$EPOCH_TRANS()', which requires Version 2 binary row event
     logging. Thus, this option and `--ndb-log-transaction-id' are not
     compatible.

     *Note*:

     MySQL Cluster NDB 7.2.1 and later use Version 2 binary log row
     events by default (and so the default value for this variable
     changes to 0 in those versions). You should keep this mind when
     planning upgrades for setups using MySQL Cluster Replication.

     This variable is not supported in mainline MySQL Server 5.5.

     For more information, see *Note
     mysql-cluster-replication-conflict-resolution::.

   *  `log_slave_updates'

     Options for log_slave_updates

     *Command-Line        `--log-slave-updates'        
     Format*                              
     *Option-File Format* `log_slave_updates'        
     *System Variable     `log_slave_updates'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Whether updates received by a slave server from a master server
     should be logged to the slave's own binary log. Binary logging
     must be enabled on the slave for this variable to have any effect.
     See *Note replication-options::.

   *  `max_binlog_cache_size'

     Options for max_binlog_cache_size

     *Command-Line        `--max_binlog_cache_size=#'        
     Format*                              
     *Option-File Format* `max_binlog_cache_size'        
     *System Variable     `max_binlog_cache_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `18446744073709547520'        
     *Range*              `4096           
                          ..              
                          18446744073709547520'        

     If a transaction requires more than this many bytes of memory, the
     server generates a `Multi-statement transaction required more than
     'max_binlog_cache_size' bytes of storage' error. The minimum value
     is 4096. The maximum possible value is 16EB (exabytes). The maximum
     recommended value is 4GB; this is due to the fact that MySQL
     currently cannot work with binary log positions greater than 4GB.

     *Note*:

     Prior to MySQL 5.5.28, 64-bit Windows platforms truncated the
     stored value for this variable to 4G, even when it was set to a
     greater value (Bug #13961678).

     In MySQL 5.5.3, a separate binary log cache (the binary log
     statement cache) was introduced for nontransactional statements
     and in MySQL 5.5.3 through 5.5.8, this variable sets.the upper
     limit for both caches. This means that, in these MySQL versions,
     the effective maximum for these caches is double the value set for
     `max_binlog_cache_size'.

     Beginning with MySQL 5.5.9, `max_binlog_cache_size' sets the size
     for the transaction cache only, and the upper limit for the
     statement cache is governed by the `max_binlog_stmt_cache_size'
     system variable.

     Also beginning with MySQL 5.5.9, the session visibility of the
     `max_binlog_cache_size' system variable matches that of the
     `binlog_cache_size' system variable: In MySQL 5.5.8 and earlier
     releases, a change in `max_binlog_cache_size' took immediate
     effect; in MySQL 5.5.9 and later, a change in
     `max_binlog_cache_size' takes effect only for new sessions that
     started after the value is changed.

   *  `max_binlog_size'

     Options for max_binlog_size

     *Command-Line        `--max_binlog_size=#'        
     Format*                              
     *Option-File Format* `max_binlog_size'        
     *System Variable     `max_binlog_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1073741824'        
     *Range*              `4096           
                          ..              
                          1073741824'        

     If a write to the binary log causes the current log file size to
     exceed the value of this variable, the server rotates the binary
     logs (closes the current file and opens the next one).  The
     minimum value is 4096 bytes. The maximum and default value is 1GB.

     A transaction is written in one chunk to the binary log, so it is
     never split between several binary logs. Therefore, if you have
     big transactions, you might see binary log files larger than
     `max_binlog_size'.

     If `max_relay_log_size' is 0, the value of `max_binlog_size'
     applies to relay logs as well.

   *  `max_binlog_stmt_cache_size'

     Options for max_binlog_stmt_cache_size

     *Introduced*         5.5.9           
     *Command-Line        `--max_binlog_stmt_cache_size=#'        
     Format*                              
     *Option-File Format* `max_binlog_stmt_cache_size'        
     *System Variable     `max_binlog_stmt_cache_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `18446744073709547520'        
     *Range*              `4096           
                          ..              
                          18446744073709547520'        

     If nontransactional statements within a transaction require more
     than this many bytes of memory, the server generates an error. The
     minimum value is 4096. The maximum and default values are 4GB on
     32-bit platforms and 16EB (exabytes) on 64-bit platforms.

     *Note*:

     Prior to MySQL 5.5.28, 64-bit Windows platforms truncated the
     stored value for this variable to 4G, even when it was set to a
     greater value (Bug #13961678).

     In MySQL 5.5.3, a separate binary log cache (the binary log
     statement cache) was introduced for nontransactional statements
     and in MySQL 5.5.3 through 5.5.8, this variable sets.the upper
     limit for both caches. This means that, in these MySQL versions,
     the effective maximum for these caches is double the value set for
     `max_binlog_cache_size'.

     Beginning with MySQL 5.5.9, `max_binlog_stmt_cache_size' sets the
     size for the statement cache only, and the upper limit for the
     transaction cache is governed exclusively by the
     `max_binlog_cache_size' system variable.

   *  `sync_binlog'

     Options for sync_binlog

     *Command-Line        `--sync-binlog=#'        
     Format*                              
     *Option-File Format* `sync_binlog'        
     *System Variable     `sync_binlog'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `32'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          4294967295'        
                          *Permitted        
                          Values*         
     *Platform Bit Size*  `64'            
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          18446744073709547520'        

     If the value of this variable is greater than 0, the MySQL server
     synchronizes its binary log to disk (using `fdatasync()') after
     every `sync_binlog' writes to the binary log. There is one write
     to the binary log per statement if autocommit is enabled, and one
     write per transaction otherwise. The default value of
     `sync_binlog' is 0, which does no synchronizing to disk--in this
     case, the server relies on the operating system to flush the
     binary log's contents from time to time as for any other file. A
     value of 1 is the safest choice because in the event of a crash
     you lose at most one statement or transaction from the binary log.
     However, it is also the slowest choice (unless the disk has a
     battery-backed cache, which makes synchronization very fast).


File: manual.info,  Node: replication-administration,  Prev: replication-options,  Up: replication-configuration

16.1.4 Common Replication Administration Tasks
----------------------------------------------

* Menu:

* replication-administration-status::  Checking Replication Status
* replication-administration-pausing::  Pausing Replication on the Slave

Once replication has been started it should execute without requiring
much regular administration. Depending on your replication environment,
you will want to check the replication status of each slave
periodically, daily, or even more frequently.


File: manual.info,  Node: replication-administration-status,  Next: replication-administration-pausing,  Prev: replication-administration,  Up: replication-administration

16.1.4.1 Checking Replication Status
....................................

The most common task when managing a replication process is to ensure
that replication is taking place and that there have been no errors
between the slave and the master. The primary statement for this is
*Note `SHOW SLAVE STATUS': show-slave-status, which you must execute on
each slave:

     mysql> SHOW SLAVE STATUS\G
     *************************** 1. row ***************************
                    Slave_IO_State: Waiting for master to send event
                       Master_Host: master1
                       Master_User: root
                       Master_Port: 3306
                     Connect_Retry: 60
                   Master_Log_File: mysql-bin.000004
               Read_Master_Log_Pos: 931
                    Relay_Log_File: slave1-relay-bin.000056
                     Relay_Log_Pos: 950
             Relay_Master_Log_File: mysql-bin.000004
                  Slave_IO_Running: Yes
                 Slave_SQL_Running: Yes
                   Replicate_Do_DB:
               Replicate_Ignore_DB:
                Replicate_Do_Table:
            Replicate_Ignore_Table:
           Replicate_Wild_Do_Table:
       Replicate_Wild_Ignore_Table:
                        Last_Errno: 0
                        Last_Error:
                      Skip_Counter: 0
               Exec_Master_Log_Pos: 931
                   Relay_Log_Space: 1365
                   Until_Condition: None
                    Until_Log_File:
                     Until_Log_Pos: 0
                Master_SSL_Allowed: No
                Master_SSL_CA_File:
                Master_SSL_CA_Path:
                   Master_SSL_Cert:
                 Master_SSL_Cipher:
                    Master_SSL_Key:
             Seconds_Behind_Master: 0
     Master_SSL_Verify_Server_Cert: No
                     Last_IO_Errno: 0
                     Last_IO_Error:
                    Last_SQL_Errno: 0
                    Last_SQL_Error:
       Replicate_Ignore_Server_Ids: 0

The key fields from the status report to examine are:

   * `Slave_IO_State': The current status of the slave. See *Note
     slave-io-thread-states::, and *Note slave-sql-thread-states::, for
     more information.

   * `Slave_IO_Running': Whether the I/O thread for reading the
     master's binary log is running. Normally, you want this to be
     `Yes' unless you have not yet started replication or have
     explicitly stopped it with *Note `STOP SLAVE': stop-slave.

   * `Slave_SQL_Running': Whether the SQL thread for executing events
     in the relay log is running. As with the I/O thread, this should
     normally be `Yes'.

   * `Last_IO_Error', `Last_SQL_Error': The last errors registered by
     the I/O and SQL threads when processing the relay log. Ideally
     these should be blank, indicating no errors.

   * `Seconds_Behind_Master': The number of seconds that the slave SQL
     thread is behind processing the master binary log. A high number
     (or an increasing one) can indicate that the slave is unable to
     handle events from the master in a timely fashion.

     A value of 0 for `Seconds_Behind_Master' can usually be
     interpreted as meaning that the slave has caught up with the
     master, but there are some cases where this is not strictly true.
     For example, this can occur if the network connection between
     master and slave is broken but the slave I/O thread has not yet
     noticed this--that is, `slave_net_timeout' has not yet elapsed.

     It is also possible that transient values for
     `Seconds_Behind_Master' may not reflect the situation accurately.
     When the slave SQL thread has caught up on I/O,
     `Seconds_Behind_Master' displays 0; but when the slave I/O thread
     is still queuing up a new event, `Seconds_Behind_Master' may show a
     large value until the SQL thread finishes executing the new event.
     This is especially likely when the events have old timestamps; in
     such cases, if you execute *Note `SHOW SLAVE STATUS':
     show-slave-status. several times in a relatively short period, you
     may see this value change back and forth repeatedly between 0 and
     a relatively large value.

Several pairs of fields provide information about the progress of the
slave in reading events from the master binary log and processing them
in the relay log:

   * (`Master_Log_file', `Read_Master_Log_Pos'): Coordinates in the
     master binary log indicating how far the slave I/O thread has read
     events from that log.

   * (`Relay_Master_Log_File', `Exec_Master_Log_Pos'): Coordinates in
     the master binary log indicating how far the slave SQL thread has
     executed events received from that log.

   * (`Relay_Log_File', `Relay_Log_Pos'): Coordinates in the slave
     relay log indicating how far the slave SQL thread has executed the
     relay log. These correspond to the preceding coordinates, but are
     expressed in slave relay log coordinates rather than master binary
     log coordinates.

On the master, you can check the status of connected slaves using *Note
`SHOW PROCESSLIST': show-processlist. to examine the list of running
processes. Slave connections have `Binlog Dump' in the `Command' field:

     mysql> SHOW PROCESSLIST \G;
     *************************** 4. row ***************************
          Id: 10
        User: root
        Host: slave1:58371
          db: NULL
     Command: Binlog Dump
        Time: 777
       State: Has sent all binlog to slave; waiting for binlog to be updated
        Info: NULL

Because it is the slave that drives the replication process, very
little information is available in this report.

For slaves that were started with the `--report-host' option and are
connected to the master, the *Note `SHOW SLAVE HOSTS':
show-slave-hosts. statement on the master shows basic information about
the slaves. The output includes the ID of the slave server, the value
of the `--report-host' option, the connecting port, and master ID:

     mysql> SHOW SLAVE HOSTS;
     +-----------+--------+------+-------------------+-----------+
     | Server_id | Host   | Port | Rpl_recovery_rank | Master_id |
     +-----------+--------+------+-------------------+-----------+
     |        10 | slave1 | 3306 |                 0 |         1 |
     +-----------+--------+------+-------------------+-----------+
     1 row in set (0.00 sec)


File: manual.info,  Node: replication-administration-pausing,  Prev: replication-administration-status,  Up: replication-administration

16.1.4.2 Pausing Replication on the Slave
.........................................

You can stop and start the replication of statements on the slave using
the *Note `STOP SLAVE': stop-slave. and *Note `START SLAVE':
start-slave. statements.

To stop processing of the binary log from the master, use *Note `STOP
SLAVE': stop-slave.:

     mysql> STOP SLAVE;

When replication is stopped, the slave I/O thread stops reading events
from the master binary log and writing them to the relay log, and the
SQL thread stops reading events from the relay log and executing them.
You can pause the I/O or SQL thread individually by specifying the
thread type:

     mysql> STOP SLAVE IO_THREAD;
     mysql> STOP SLAVE SQL_THREAD;

To start execution again, use the *Note `START SLAVE': start-slave.
statement:

     mysql> START SLAVE;

To start a particular thread, specify the thread type:

     mysql> START SLAVE IO_THREAD;
     mysql> START SLAVE SQL_THREAD;

For a slave that performs updates only by processing events from the
master, stopping only the SQL thread can be useful if you want to
perform a backup or other task. The I/O thread will continue to read
events from the master but they are not executed. This makes it easier
for the slave to catch up when you restart the SQL thread.

Stopping only the I/O thread enables the events in the relay log to be
executed by the SQL thread up to the point where the relay log ends.
This can be useful when you want to pause execution to catch up with
events already received from the master, when you want to perform
administration on the slave but also ensure that it has processed all
updates to a specific point. This method can also be used to pause
event receipt on the slave while you conduct administration on the
master. Stopping the I/O thread but permitting the SQL thread to run
helps ensure that there is not a massive backlog of events to be
executed when replication is started again.


File: manual.info,  Node: replication-implementation,  Next: replication-solutions,  Prev: replication-configuration,  Up: replication

16.2 Replication Implementation
===============================

* Menu:

* replication-implementation-details::  Replication Implementation Details
* slave-logs::                   Replication Relay and Status Logs
* replication-rules::            How Servers Evaluate Replication Filtering Rules

Replication is based on the master server keeping track of all changes
to its databases (updates, deletes, and so on) in its binary log. The
binary log serves as a written record of all events that modify
database structure or content (data) from the moment the server was
started. Typically, *Note `SELECT': select.  statements are not
recorded because they modify neither database structure nor content.

Each slave that connects to the master requests a copy of the binary
log. That is, it pulls the data from the master, rather than the master
pushing the data to the slave. The slave also executes the events from
the binary log that it receives. This has the effect of repeating the
original changes just as they were made on the master.  Tables are
created or their structure modified, and data is inserted, deleted, and
updated according to the changes that were originally made on the
master.

Because each slave is independent, the replaying of the changes from
the master's binary log occurs independently on each slave that is
connected to the master. In addition, because each slave receives a
copy of the binary log only by requesting it from the master, the slave
is able to read and update the copy of the database at its own pace and
can start and stop the replication process at will without affecting
the ability to update to the latest database status on either the
master or slave side.

For more information on the specifics of the replication
implementation, see *Note replication-implementation-details::.

Masters and slaves report their status in respect of the replication
process regularly so that you can monitor them. See *Note
thread-information::, for descriptions of all replicated-related states.

The master binary log is written to a local relay log on the slave
before it is processed. The slave also records information about the
current position with the master's binary log and the local relay log.
See *Note slave-logs::.

Database changes are filtered on the slave according to a set of rules
that are applied according to the various configuration options and
variables that control event evaluation. For details on how these rules
are applied, see *Note replication-rules::.


File: manual.info,  Node: replication-implementation-details,  Next: slave-logs,  Prev: replication-implementation,  Up: replication-implementation

16.2.1 Replication Implementation Details
-----------------------------------------

MySQL replication capabilities are implemented using three threads, one
on the master server and two on the slave:

   * Binlog dump thread

     The master creates a thread to send the binary log contents to a
     slave when the slave connects. This thread can be identified in
     the output of *Note `SHOW PROCESSLIST': show-processlist. on the
     master as the `Binlog Dump' thread.

     The binlog dump thread acquires a lock on the master's binary log
     for reading each event that is to be sent to the slave. As soon as
     the event has been read, the lock is released, even before the
     event is sent to the slave.

   * Slave I/O thread

     When a *Note `START SLAVE': start-slave. statement is issued on a
     slave server, the slave creates an I/O thread, which connects to
     the master and asks it to send the updates recorded in its binary
     logs.

     The slave I/O thread reads the updates that the master's `Binlog
     Dump' thread sends (see previous item) and copies them to local
     files that comprise the slave's relay log.

     The state of this thread is shown as `Slave_IO_running' in the
     output of *Note `SHOW SLAVE STATUS': show-slave-status. or as
     `Slave_running' in the output of *Note `SHOW STATUS': show-status.

   * Slave SQL thread

     The slave creates an SQL thread to read the relay log that is
     written by the slave I/O thread and execute the events contained
     therein.

In the preceding description, there are three threads per master/slave
connection. A master that has multiple slaves creates one binlog dump
thread for each currently connected slave, and each slave has its own
I/O and SQL threads.

A slave uses two threads to separate reading updates from the master
and executing them into independent tasks. Thus, the task of reading
statements is not slowed down if statement execution is slow. For
example, if the slave server has not been running for a while, its I/O
thread can quickly fetch all the binary log contents from the master
when the slave starts, even if the SQL thread lags far behind. If the
slave stops before the SQL thread has executed all the fetched
statements, the I/O thread has at least fetched everything so that a
safe copy of the statements is stored locally in the slave's relay
logs, ready for execution the next time that the slave starts. This
enables the master server to purge its binary logs sooner because it no
longer needs to wait for the slave to fetch their contents.

The *Note `SHOW PROCESSLIST': show-processlist. statement provides
information that tells you what is happening on the master and on the
slave regarding replication. For information on master states, see
*Note master-thread-states::. For slave states, see *Note
slave-io-thread-states::, and *Note slave-sql-thread-states::.

The following example illustrates how the three threads show up in the
output from *Note `SHOW PROCESSLIST': show-processlist.

On the master server, the output from *Note `SHOW PROCESSLIST':
show-processlist. looks like this:

     mysql> SHOW PROCESSLIST\G
     *************************** 1. row ***************************
          Id: 2
        User: root
        Host: localhost:32931
          db: NULL
     Command: Binlog Dump
        Time: 94
       State: Has sent all binlog to slave; waiting for binlog to
              be updated
        Info: NULL

Here, thread 2 is a `Binlog Dump' replication thread that services a
connected slave. The `State' information indicates that all outstanding
updates have been sent to the slave and that the master is waiting for
more updates to occur. If you see no `Binlog Dump' threads on a master
server, this means that replication is not running; that is, no slaves
are currently connected.

On a slave server, the output from *Note `SHOW PROCESSLIST':
show-processlist. looks like this:

     mysql> SHOW PROCESSLIST\G
     *************************** 1. row ***************************
          Id: 10
        User: system user
        Host:
          db: NULL
     Command: Connect
        Time: 11
       State: Waiting for master to send event
        Info: NULL
     *************************** 2. row ***************************
          Id: 11
        User: system user
        Host:
          db: NULL
     Command: Connect
        Time: 11
       State: Has read all relay log; waiting for the slave I/O
              thread to update it
        Info: NULL

The `State' information indicates that thread 10 is the I/O thread that
is communicating with the master server, and thread 11 is the SQL
thread that is processing the updates stored in the relay logs. At the
time that *Note `SHOW PROCESSLIST': show-processlist. was run, both
threads were idle, waiting for further updates.

The value in the `Time' column can show how late the slave is compared
to the master. See *Note faqs-replication::. If sufficient time elapses
on the master side without activity on the `Binlog Dump' thread, the
master determines that the slave is no longer connected. As for any
other client connection, the timeouts for this depend on the values of
`net_write_timeout' and `net_retry_count'; for more information about
these, see *Note server-system-variables::.

The *Note `SHOW SLAVE STATUS': show-slave-status. statement provides
additional information about replication processing on a slave server.
See *Note replication-administration-status::.


File: manual.info,  Node: slave-logs,  Next: replication-rules,  Prev: replication-implementation-details,  Up: replication-implementation

16.2.2 Replication Relay and Status Logs
----------------------------------------

* Menu:

* slave-logs-relaylog::          The Slave Relay Log
* slave-logs-status::            Slave Status Logs

During replication, a slave server creates several logs that hold the
binary log events relayed from the master to the slave, and to record
information about the current status and location within the relay log.
There are three types of logs used in the process, listed here:

   * The _relay log_ consists of the events read from the binary log of
     the master and written by the slave I/O thread. Events in the
     relay log are executed on the slave as part of the SQL thread.

   * The _master info log_ contains status and current configuration
     information for the slave's connection to the master. This log
     holds information on the master host name, login credentials, and
     coordinates indicating how far the slave has read from the
     master's binary log.

   * The _relay log info log_ holds status information about the
     execution point within the slave's relay log.


File: manual.info,  Node: slave-logs-relaylog,  Next: slave-logs-status,  Prev: slave-logs,  Up: slave-logs

16.2.2.1 The Slave Relay Log
............................

The relay log, like the binary log, consists of a set of numbered files
containing events that describe database changes, and an index file
that contains the names of all used relay log files.

The term `relay log file' generally denotes an individual numbered file
containing database events. The term `relay log' collectively denotes
the set of numbered relay log files plus the index file.

Relay log files have the same format as binary log files and can be
read using *Note `mysqlbinlog': mysqlbinlog. (see *Note mysqlbinlog::).

By default, relay log file names have the form
`HOST_NAME-relay-bin.NNNNNN' in the data directory, where HOST_NAME is
the name of the slave server host and NNNNNN is a sequence number.
Successive relay log files are created using successive sequence
numbers, beginning with `000001'. The slave uses an index file to track
the relay log files currently in use. The default relay log index file
name is `HOST_NAME-relay-bin.index' in the data directory.

The default relay log file and relay log index file names can be
overridden with, respectively, the `--relay-log' and
`--relay-log-index' server options (see *Note replication-options::).

If a slave uses the default host-based relay log file names, changing a
slave's host name after replication has been set up can cause
replication to fail with the errors `Failed to open the relay log' and
`Could not find target log during relay log initialization'. This is a
known issue (see Bug #2122). If you anticipate that a slave's host name
might change in the future (for example, if networking is set up on the
slave such that its host name can be modified using DHCP), you can
avoid this issue entirely by using the `--relay-log' and
`--relay-log-index' options to specify relay log file names explicitly
when you initially set up the slave. This will make the names
independent of server host name changes.

If you encounter the issue after replication has already begun, one way
to work around it is to stop the slave server, prepend the contents of
the old relay log index file to the new one, and then restart the
slave. On a Unix system, this can be done as shown here:

     shell> cat NEW_RELAY_LOG_NAME.index >> OLD_RELAY_LOG_NAME.index
     shell> mv OLD_RELAY_LOG_NAME.index NEW_RELAY_LOG_NAME.index

A slave server creates a new relay log file under the following
conditions:

   * Each time the I/O thread starts.

   * When the logs are flushed; for example, with *Note `FLUSH LOGS':
     flush.  or *Note `mysqladmin flush-logs': mysqladmin.

   * When the size of the current relay log file becomes `too large,'
     determined as follows:

        * If the value of `max_relay_log_size' is greater than 0, that
          is the maximum relay log file size.

        * If the value of `max_relay_log_size' is 0, `max_binlog_size'
          determines the maximum relay log file size.

The SQL thread automatically deletes each relay log file as soon as it
has executed all events in the file and no longer needs it. There is no
explicit mechanism for deleting relay logs because the SQL thread takes
care of doing so. However, *Note `FLUSH LOGS': flush.  rotates relay
logs, which influences when the SQL thread deletes them.


File: manual.info,  Node: slave-logs-status,  Prev: slave-logs-relaylog,  Up: slave-logs

16.2.2.2 Slave Status Logs
..........................

A replication slave server creates two logs. By default, these logs are
files named `master.info' and `relay-log.info' and created in the data
directory. The names and locations of these files can be changed by
using the `--master-info-file' and `--relay-log-info-file' options,
respectively. See *Note replication-options::.

The two status logs contain information like that shown in the output
of the *Note `SHOW SLAVE STATUS': show-slave-status.  statement, which
is discussed in *Note replication-slave-sql::. Because the status logs
are stored on disk, they survive a slave server's shutdown.  The next
time the slave starts up, it reads the two logs to determine how far it
has proceeded in reading binary logs from the master and in processing
its own relay logs.

The master info log should be protected because it contains the
password for connecting to the master. See *Note password-logging::.

The slave I/O thread updates the master info log. The following table
shows the correspondence between the lines in the `master.info' file
and the columns displayed by *Note `SHOW SLAVE STATUS':
show-slave-status.

This table shows the correspondence between the lines in the
`master.info' file and the columns displayed by *Note `SHOW SLAVE
STATUS': show-slave-status.

Line in     `SHOW SLAVE STATUS' Column    Description
`master.info'                              
1                                         Number of lines in the file
2           `Master_Log_File'             The name of the master binary
                                          log currently being read from
                                          the master
3           `Read_Master_Log_Pos'         The current position within the
                                          master binary log that have
                                          been read from the master
4           `Master_Host'                 The host name of the master
5           `Master_User'                 The user name used to connect
                                          to the master
6           Password (not shown by *Note  The password used to connect to
            `SHOW SLAVE STATUS':          the master
            show-slave-status.)           
7           `Master_Port'                 The network port used to
                                          connect to the master
8           `Connect_Retry'               The period (in seconds) that
                                          the slave will wait before
                                          trying to reconnect to the
                                          master
9           `Master_SSL_Allowed'          Indicates whether the server
                                          supports SSL connections
10          `Master_SSL_CA_File'          The file used for the
                                          Certificate Authority (CA)
                                          certificate
11          `Master_SSL_CA_Path'          The path to the Certificate
                                          Authority (CA) certificates
12          `Master_SSL_Cert'             The name of the SSL certificate
                                          file
13          `Master_SSL_Cipher'           The list of possible ciphers
                                          used in the handshake for the
                                          SSL connection
14          `Master_SSL_Key'              The name of the SSL key file
15          `Master_SSL_Verify_Server_Cert'Whether to verify the server
                                          certificate
17          `Replicate_Ignore_Server_Ids' The number of server IDs to be
                                          ignored, followed by the actual
                                          server IDs

The slave SQL thread updates the relay log info log. The following
table shows the correspondence between the lines in the
`relay-log.info' file and the columns displayed by *Note `SHOW SLAVE
STATUS': show-slave-status.

This table shows the correspondence between the lines in the
`relay-log.info' file and the columns displayed by *Note `SHOW SLAVE
STATUS': show-slave-status.

Line in     `SHOW SLAVE STATUS'       Description
`relay-log.info'Column                    
1           `Relay_Log_File'          The name of the current relay log
                                      file
2           `Relay_Log_Pos'           The current position within the
                                      relay log file; events up to this
                                      position have been executed on the
                                      slave database
3           `Relay_Master_Log_File'   The name of the master binary log
                                      file from which the events in the
                                      relay log file were read
4           `Exec_Master_Log_Pos'     The equivalent position within the
                                      master's binary log file of events
                                      that have already been executed

The contents of the `relay-log.info' file and the states shown by the
*Note `SHOW SLAVE STATUS': show-slave-status. statement might not match
if the `relay-log.info' file has not been flushed to disk. Ideally, you
should only view `relay-log.info' on a slave that is offline (that is,
`mysqld' is not running). For a running system, *Note `SHOW SLAVE
STATUS': show-slave-status.  should be used.

When you back up the slave's data, you should back up these two status
logs, along with the relay log files. The status logs are needed to
resume replication after you restore the data from the slave. If you
lose the relay logs but still have the relay log info log, you can
check it to determine how far the SQL thread has executed in the master
binary logs. Then you can use *Note `CHANGE MASTER TO':
change-master-to. with the `MASTER_LOG_FILE' and `MASTER_LOG_POS'
options to tell the slave to re-read the binary logs from that point.
Of course, this requires that the binary logs still exist on the master.


File: manual.info,  Node: replication-rules,  Prev: slave-logs,  Up: replication-implementation

16.2.3 How Servers Evaluate Replication Filtering Rules
-------------------------------------------------------

* Menu:

* replication-rules-db-options::  Evaluation of Database-Level Replication and Binary Logging Options
* replication-rules-table-options::  Evaluation of Table-Level Replication Options
* replication-rules-examples::   Replication Rule Application

If a master server does not write a statement to its binary log, the
statement is not replicated. If the server does log the statement, the
statement is sent to all slaves and each slave determines whether to
execute it or ignore it.

On the master, you can control which databases to log changes for by
using the `--binlog-do-db' and `--binlog-ignore-db' options to control
binary logging. For a description of the rules that servers use in
evaluating these options, see *Note replication-rules-db-options::. You
should not use these options to control which databases and tables are
replicated. Instead, use filtering on the slave to control the events
that are executed on the slave.

On the slave side, decisions about whether to execute or ignore
statements received from the master are made according to the
`--replicate-*' options that the slave was started with. (See *Note
replication-options::.)

In the simplest case, when there are no `--replicate-*' options, the
slave executes all statements that it receives from the master.
Otherwise, the result depends on the particular options given.

Database-level options (`--replicate-do-db', `--replicate-ignore-db')
are checked first; see *Note replication-rules-db-options::, for a
description of this process. If no matching database-level options are
found, option checking proceeds to any table-level options that may be
in use, as discussed in *Note replication-rules-table-options::.

To make it easier to determine what effect an option set will have, it
is recommended that you avoid mixing `do' and `ignore' options, or
wildcard and nonwildcard options. An example of the latter that may
have unintended effects is the use of `--replicate-do-db' and
`--replicate-wild-do-table' together, where `--replicate-wild-do-table'
uses a pattern for the database name that matches the name given for
`--replicate-do-db'. Suppose a replication slave is started with
`--replicate-do-db=dbx' `--replicate-wild-do-table=db%.t1'.  Then,
suppose that on the master, you issue the statement *Note `CREATE
DATABASE dbx': create-database. Although you might expect it, this
statement is not replicated because it does not reference a table named
`t1'.

If any `--replicate-rewrite-db' options were specified, they are
applied before the `--replicate-*' filtering rules are tested.

*Note*:

In MySQL 5.5, database-level filtering options are case-sensitive on
platforms supporting case sensitivity in filenames, whereas table-level
filtering options are not (regardless of platform). This is true
regardless of the value of the `lower_case_table_names' system variable.


File: manual.info,  Node: replication-rules-db-options,  Next: replication-rules-table-options,  Prev: replication-rules,  Up: replication-rules

16.2.3.1 Evaluation of Database-Level Replication and Binary Logging Options
............................................................................

When evaluating replication options, the slave begins by checking to
see whether there are any `--replicate-do-db' or
`--replicate-ignore-db' options that apply. When using `--binlog-do-db'
or `--binlog-ignore-db', the process is similar, but the options are
checked on the master.

With statement-based replication, the default database is checked for a
match. With row-based replication, the database where data is to be
changed is the database that is checked.  Regardless of the binary
logging format, checking of database-level options proceeds as shown in
the following diagram.

Evaluation of Database-Level Filtering Rules in Replication

The steps involved are listed here:

  1. Are there any `--replicate-do-db' options?

        * Yes

          Do any of them match the database?

             * Yes

               Execute the statement and exit.

             * No

               Continue to step 2.

        * No

          Continue to step 2.

  2. Are there any `--replicate-ignore-db' options?

        * Yes

          Do any of them match the database?

             * Yes

               Ignore the statement and exit.

             * No

               Continue to step 3.

        * No

          Continue to step 3.

  3. Proceed to checking the table-level replication options, if there
     are any. For a description of how these options are checked, see
     *Note replication-rules-table-options::.

     *Important*:

     A statement that is still permitted at this stage is not yet
     actually executed. The statement is not executed until all
     table-level options (if any) have also been checked, and the
     outcome of that process permits execution of the statement.

For binary logging, the steps involved are listed here:

  1. Are there any `--binlog-do-db' or `--binlog-ignore-db' options?

        * Yes

          Continue to step 2.

        * No

          Log the statement and exit.

  2. Is there a default database (has any database been selected by
     *Note `USE': use.)?

        * Yes

          Continue to step 3.

        * No

          Ignore the statement and exit.

  3. There is a default database. Are there any `--binlog-do-db'
     options?

        * Yes

          Do any of them match the database?

             * Yes

               Log the statement and exit.

             * No

               Ignore the statement and exit.

        * No

          Continue to step 4.

  4. Do any of the `--binlog-ignore-db' options match the database?

        * Yes

          Ignore the statement and exit.

        * No

          Log the statement and exit.

*Important*:

For statement-based logging, an exception is made in the rules just
given for the *Note `CREATE DATABASE': create-database, *Note `ALTER
DATABASE': alter-database, and *Note `DROP DATABASE': drop-database.
statements. In those cases, the database being _created, altered, or
dropped_ replaces the default database when determining whether to log
or ignore updates.

`--binlog-do-db' can sometimes mean `ignore other databases'. For
example, when using statement-based logging, a server running with only
`--binlog-do-db=sales' does not write to the binary log statements for
which the default database differs from `sales'. When using row-based
logging with the same option, the server logs only those updates that
change data in `sales'.


File: manual.info,  Node: replication-rules-table-options,  Next: replication-rules-examples,  Prev: replication-rules-db-options,  Up: replication-rules

16.2.3.2 Evaluation of Table-Level Replication Options
......................................................

The slave checks for and evaluates table options only if no matching
database options were found (see *Note replication-rules-db-options::).

First, as a preliminary condition, the slave checks whether
statement-based replication is enabled. If so, and the statement occurs
within a stored function, the slave executes the statement and exits.
If row-based replication is enabled, the slave does not know whether a
statement occurred within a stored function on the master, so this
condition does not apply.

*Note*:

For statement-based replication, replication events represent
statements (all changes making up a given event are associated with a
single SQL statement); for row-based replication, each event represents
a change in a single table row (thus a single statement such as `UPDATE
mytable SET mycol = 1' may yield many row-based events). When viewed in
terms of events, the process of checking table options is the same for
both row-based and statement-based replication.

Having reached this point, if there are no table options, the slave
simply executes all events. If there are any `--replicate-do-table' or
`--replicate-wild-do-table' options, the event must match one of these
if it is to be executed; otherwise, it is ignored. If there are any
`--replicate-ignore-table' or `--replicate-wild-ignore-table' options,
all events are executed except those that match any of these options.
This process is illustrated in the following diagram.

Evaluation of Table-Level Filtering Rules in Replication

The following steps describe this evaluation in more detail:

  1. Are there any table options?

        * Yes

          Continue to step 2.

        * No

          Execute the event and exit.

  2. Are there any `--replicate-do-table' options?

        * Yes

          Does the table match any of them?

             * Yes

               Execute the event and exit.

             * No

               Continue to step 3.

        * No

          Continue to step 3.

  3. Are there any `--replicate-ignore-table' options?

        * Yes

          Does the table match any of them?

             * Yes

               Ignore the event and exit.

             * No

               Continue to step 4.

        * No

          Continue to step 4.

  4. Are there any `--replicate-wild-do-table' options?

        * Yes

          Does the table match any of them?

             * Yes

               Execute the event and exit.

             * No

               Continue to step 5.

        * No

          Continue to step 5.

  5. Are there any `--replicate-wild-ignore-table' options?

        * Yes

          Does the table match any of them?

             * Yes

               Ignore the event and exit.

             * No

               Continue to step 6.

        * No

          Continue to step 6.

  6. Are there any `--replicate-do-table' or `--replicate-wild-do-table'
     options?

        * Yes

          Ignore the event and exit.

        * No

          Execute the event and exit.


File: manual.info,  Node: replication-rules-examples,  Prev: replication-rules-table-options,  Up: replication-rules

16.2.3.3 Replication Rule Application
.....................................

This section provides additional explanation and examples of usage for
different combinations of replication filtering options.

Some typical combinations of replication filter rule types are given in
the following table:

This table shows typical combinations of replication filter rule types
and describes the outcome of each.

Condition (Types of Options)  Outcome
No `--replicate-*' options    The slave executes all events that it
at all:                       receives from the master.
`--replicate-*-db' options,   The slave accepts or ignores events using
but no table options:         the database options. It executes all
                              events permitted by those options because
                              there are no table restrictions.
`--replicate-*-table'         All events are accepted at the
options, but no database      database-checking stage because there are
options:                      no database conditions. The slave executes
                              or ignores events based solely on the
                              table options.
A combination of database     The slave accepts or ignores events using
and table options:            the database options. Then it evaluates
                              all events permitted by those options
                              according to the table options. This can
                              sometimes lead to results that seem
                              counterintuitive, and that may be
                              different depending on whether you are
                              using statement-based or row-based
                              replication; see the text for an example.

A more complex example follows, in which we examine the outcomes for
both statement-based and row-based settings.

Suppose that we have two tables `mytbl1' in database `db1' and `mytbl2'
in database `db2' on the master, and the slave is running with the
following options (and no other replication filtering options):

     replicate-ignore-db = db1
     replicate-do-table  = db2.tbl2

Now we execute the following statements on the master:

     USE db1;
     INSERT INTO db2.tbl2 VALUES (1);

The results on the slave vary considerably depending on the binary log
format, and may not match initial expectations in either case.

Statement-based replication

The `USE' statement causes `db1' to be the default database. Thus the
`--replicate-ignore-db' option matches, _and the *Note `INSERT':
insert. statement is ignored_. The table options are not checked.

Row-based replication

The default database has no effect on how the slave reads database
options when using row-based replication. Thus, the *Note `USE': use.
statement makes no difference in how the `--replicate-ignore-db' option
is handled: the database specified by this option does not match the
database where the *Note `INSERT': insert.  statement changes data, so
the slave proceeds to check the table options. The table specified by
`--replicate-do-table' matches the table to be updated, _and the row is
inserted_.


File: manual.info,  Node: replication-solutions,  Next: replication-notes,  Prev: replication-implementation,  Up: replication

16.3 Replication Solutions
==========================

* Menu:

* replication-solutions-backups::  Using Replication for Backups
* replication-solutions-diffengines::  Using Replication with Different Master and Slave Storage Engines
* replication-solutions-scaleout::  Using Replication for Scale-Out
* replication-solutions-partitioning::  Replicating Different Databases to Different Slaves
* replication-solutions-performance::  Improving Replication Performance
* replication-solutions-switch::  Switching Masters During Failover
* replication-solutions-ssl::    Setting Up Replication Using SSL
* replication-semisync::         Semisynchronous Replication

Replication can be used in many different environments for a range of
purposes. This section provides general notes and advice on using
replication for specific solution types.

For information on using replication in a backup environment, including
notes on the setup, backup procedure, and files to back up, see *Note
replication-solutions-backups::.

For advice and tips on using different storage engines on the master
and slaves, see *Note replication-solutions-diffengines::.

Using replication as a scale-out solution requires some changes in the
logic and operation of applications that use the solution. See *Note
replication-solutions-scaleout::.

For performance or data distribution reasons, you may want to replicate
different databases to different replication slaves. See *Note
replication-solutions-partitioning::

As the number of replication slaves increases, the load on the master
can increase and lead to reduced performance (because of the need to
replicate the binary log to each slave). For tips on improving your
replication performance, including using a single secondary server as
an replication master, see *Note replication-solutions-performance::.

For guidance on switching masters, or converting slaves into masters as
part of an emergency failover solution, see *Note
replication-solutions-switch::.

To secure your replication communication, you can use SSL to encrypt
the communication channel. For step-by-step instructions, see *Note
replication-solutions-ssl::.


File: manual.info,  Node: replication-solutions-backups,  Next: replication-solutions-diffengines,  Prev: replication-solutions,  Up: replication-solutions

16.3.1 Using Replication for Backups
------------------------------------

* Menu:

* replication-solutions-backups-mysqldump::  Backing Up a Slave Using `mysqldump'
* replication-solutions-backups-rawdata::  Backing Up Raw Data from a Slave
* replication-solutions-backups-read-only::  Backing Up a Master or Slave by Making It Read Only

To use replication as a backup solution, replicate data from the master
to a slave, and then back up the data slave. The slave can be paused
and shut down without affecting the running operation of the master, so
you can produce an effective snapshot of `live' data that would
otherwise require the master to be shut down.

How you back up a database depends on its size and whether you are
backing up only the data, or the data and the replication slave state
so that you can rebuild the slave in the event of failure.  There are
therefore two choices:

   * If you are using replication as a solution to enable you to back
     up the data on the master, and the size of your database is not
     too large, the *Note `mysqldump': mysqldump. tool may be suitable.
     See *Note replication-solutions-backups-mysqldump::.

   * For larger databases, where *Note `mysqldump': mysqldump. would be
     impractical or inefficient, you can back up the raw data files
     instead. Using the raw data files option also means that you can
     back up the binary and relay logs that will enable you to recreate
     the slave in the event of a slave failure. For more information,
     see *Note replication-solutions-backups-rawdata::.

Another backup strategy, which can be used for either master or slave
servers, is to put the server in a read-only state. The backup is
performed against the read-only server, which then is changed back to
its usual read/write operational status. See *Note
replication-solutions-backups-read-only::.


File: manual.info,  Node: replication-solutions-backups-mysqldump,  Next: replication-solutions-backups-rawdata,  Prev: replication-solutions-backups,  Up: replication-solutions-backups

16.3.1.1 Backing Up a Slave Using `mysqldump'
.............................................

Using *Note `mysqldump': mysqldump. to create a copy of a database
enables you to capture all of the data in the database in a format that
enables the information to be imported into another instance of MySQL
Server (see *Note mysqldump::). Because the format of the information
is SQL statements, the file can easily be distributed and applied to
running servers in the event that you need access to the data in an
emergency. However, if the size of your data set is very large, *Note
`mysqldump': mysqldump. may be impractical.

When using *Note `mysqldump': mysqldump, you should stop replication on
the slave before starting the dump process to ensure that the dump
contains a consistent set of data:

  1. Stop the slave from processing requests. You can stop replication
     completely on the slave using *Note `mysqladmin': mysqladmin.:

          shell> mysqladmin stop-slave

     Alternatively, you can stop only the slave SQL thread to pause
     event execution:

          shell> mysql -e 'STOP SLAVE SQL_THREAD;'

     This enables the slave to continue to receive data change events
     from the master's binary log and store them in the relay logs
     using the I/O thread, but prevents the slave from executing these
     events and changing its data. Within busy replication
     environments, permitting the I/O thread to run during backup may
     speed up the catch-up process when you restart the slave SQL
     thread.

  2. Run *Note `mysqldump': mysqldump. to dump your databases. You may
     either dump all databases or select databases to be dumped. For
     example, to dump all databases:

          shell> mysqldump --all-databases > fulldb.dump

  3. Once the dump has completed, start slave operations again:

          shell> mysqladmin start-slave

In the preceding example, you may want to add login credentials (user
name, password) to the commands, and bundle the process up into a
script that you can run automatically each day.

If you use this approach, make sure you monitor the slave replication
process to ensure that the time taken to run the backup does not affect
the slave's ability to keep up with events from the master. See *Note
replication-administration-status::. If the slave is unable to keep up,
you may want to add another slave and distribute the backup process.
For an example of how to configure this scenario, see *Note
replication-solutions-partitioning::.


File: manual.info,  Node: replication-solutions-backups-rawdata,  Next: replication-solutions-backups-read-only,  Prev: replication-solutions-backups-mysqldump,  Up: replication-solutions-backups

16.3.1.2 Backing Up Raw Data from a Slave
.........................................

To guarantee the integrity of the files that are copied, backing up the
raw data files on your MySQL replication slave should take place while
your slave server is shut down. If the MySQL server is still running,
background tasks may still be updating the database files, particularly
those involving storage engines with background processes such as
`InnoDB'.  With `InnoDB', these problems should be resolved during
crash recovery, but since the slave server can be shut down during the
backup process without affecting the execution of the master it makes
sense to take advantage of this capability.

To shut down the server and back up the files:

  1. Shut down the slave MySQL server:

          shell> mysqladmin shutdown

  2. Copy the data files. You can use any suitable copying or archive
     utility, including `cp', `tar' or `WinZip'. For example, assuming
     that the data directory is located under the current directory,
     you can archive the entire directory as follows:

          shell> tar cf /tmp/dbbackup.tar ./data

  3. Start the MySQL server again. Under Unix:

          shell> mysqld_safe &

     Under Windows:

          C:\> "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld"

Normally you should back up the entire data directory for the slave
MySQL server. If you want to be able to restore the data and operate as
a slave (for example, in the event of failure of the slave), then in
addition to the slave's data, you should also back up the slave status
files, `master.info' and `relay-log.info', along with the relay log
files. These files are needed to resume replication after you restore
the slave's data.

If you lose the relay logs but still have the `relay-log.info' file,
you can check it to determine how far the SQL thread has executed in
the master binary logs. Then you can use *Note `CHANGE MASTER TO':
change-master-to. with the `MASTER_LOG_FILE' and `MASTER_LOG_POS'
options to tell the slave to re-read the binary logs from that point.
This requires that the binary logs still exist on the master server.

If your slave is replicating *Note `LOAD DATA INFILE': load-data.
statements, you should also back up any `SQL_LOAD-*' files that exist
in the directory that the slave uses for this purpose. The slave needs
these files to resume replication of any interrupted *Note `LOAD DATA
INFILE': load-data. operations. The location of this directory is the
value of the `--slave-load-tmpdir' option. If the server was not
started with that option, the directory location is the value of the
`tmpdir' system variable.


File: manual.info,  Node: replication-solutions-backups-read-only,  Prev: replication-solutions-backups-rawdata,  Up: replication-solutions-backups

16.3.1.3 Backing Up a Master or Slave by Making It Read Only
............................................................

It is possible to back up either master or slave servers in a
replication setup by acquiring a global read lock and manipulating the
`read_only' system variable to change the read-only state of the server
to be backed up:

  1. Make the server read-only, so that it processes only retrievals
     and blocks updates.

  2. Perform the backup.

  3. Change the server back to its normal read/write state.

*Note*:

The instructions in this section place the server to be backed up in a
state that is safe for backup methods that get the data from the
server, such as *Note `mysqldump': mysqldump.  (see *Note mysqldump::).
You should not attempt to use these instructions to make a binary
backup by copying files directly because the server may still have
modified data cached in memory and not flushed to disk.

The following instructions describe how to do this for a master server
and for a slave server. For both scenarios discussed here, suppose that
you have the following replication setup:

   * A master server M1

   * A slave server S1 that has M1 as its master

   * A client C1 connected to M1

   * A client C2 connected to S1

In either scenario, the statements to acquire the global read lock and
manipulate the `read_only' variable are performed on the server to be
backed up and do not propagate to any slaves of that server.

*Scenario 1: Backup with a Read-Only Master*

Put the master M1 in a read-only state by executing these statements on
it:

     mysql> FLUSH TABLES WITH READ LOCK;
     mysql> SET GLOBAL read_only = ON;

While M1 is in a read-only state, the following properties are true:

   * Requests for updates sent by C1 to M1 will block because the
     server is in read-only mode.

   * Requests for query results sent by C1 to M1 will succeed.

   * Making a backup on M1 is safe.

   * Making a backup on S1 is not safe. This server is still running,
     and might be processing the binary log or update requests coming
     from client C2

While M1 is read only, perform the backup. For example, you can use
*Note `mysqldump': mysqldump.

After the backup operation on M1 completes, restore M1 to its normal
operational state by executing these statements:

     mysql> SET GLOBAL read_only = OFF;
     mysql> UNLOCK TABLES;

Although performing the backup on M1 is safe (as far as the backup is
concerned), it is not optimal for performance because clients of M1 are
blocked from executing updates.

This strategy applies to backing up a master server in a replication
setup, but can also be used for a single server in a nonreplication
setting.

*Scenario 2: Backup with a Read-Only Slave*

Put the slave S1 in a read-only state by executing these statements on
it:

     mysql> FLUSH TABLES WITH READ LOCK;
     mysql> SET GLOBAL read_only = ON;

While S1 is in a read-only state, the following properties are true:

   * The master M1 will continue to operate, so making a backup on the
     master is not safe.

   * The slave S1 is stopped, so making a backup on the slave S1 is
     safe.

These properties provide the basis for a popular backup scenario:
Having one slave busy performing a backup for a while is not a problem
because it does not affect the entire network, and the system is still
running during the backup. In particular, clients can still perform
updates on the master server, which remains unaffected by backup
activity on the slave.

While S1 is read only, perform the backup. For example, you can use
*Note `mysqldump': mysqldump.

After the backup operation on S1 completes, restore S1 to its normal
operational state by executing these statements:

     mysql> SET GLOBAL read_only = OFF;
     mysql> UNLOCK TABLES;

After the slave is restored to normal operation, it again synchronizes
to the master by catching up with any outstanding updates from the
binary log of the master.


File: manual.info,  Node: replication-solutions-diffengines,  Next: replication-solutions-scaleout,  Prev: replication-solutions-backups,  Up: replication-solutions

16.3.2 Using Replication with Different Master and Slave Storage Engines
------------------------------------------------------------------------

It does not matter for the replication process whether the source table
on the master and the replicated table on the slave use different
engine types. In fact, the `default_storage_engine' and
`storage_engine' system variables are not replicated.

This provides a number of benefits in the replication process in that
you can take advantage of different engine types for different
replication scenarios. For example, in a typical scale-out scenario (see
*Note replication-solutions-scaleout::), you want to use `InnoDB'
tables on the master to take advantage of the transactional
functionality, but use `MyISAM' on the slaves where transaction support
is not required because the data is only read. When using replication
in a data-logging environment you may want to use the `Archive' storage
engine on the slave.

Configuring different engines on the master and slave depends on how
you set up the initial replication process:

   * If you used *Note `mysqldump': mysqldump. to create the database
     snapshot on your master, you could edit the dump file text to
     change the engine type used on each table.

     Another alternative for *Note `mysqldump': mysqldump. is to
     disable engine types that you do not want to use on the slave
     before using the dump to build the data on the slave. For example,
     you can add the `--skip-innodb' option on your slave to disable
     the `InnoDB' engine. If a specific engine does not exist for a
     table to be created, MySQL will use the default engine type,
     usually `MyISAM'. (This requires that the `NO_ENGINE_SUBSTITUTION'
     SQL mode is not enabled.) If you want to disable additional
     engines in this way, you may want to consider building a special
     binary to be used on the slave that only supports the engines you
     want.

   * If you are using raw data files (a binary backup) to set up the
     slave, you will be unable to change the initial table format.
     Instead, use *Note `ALTER TABLE': alter-table. to change the table
     types after the slave has been started.

   * For new master/slave replication setups where there are currently
     no tables on the master, avoid specifying the engine type when
     creating new tables.

If you are already running a replication solution and want to convert
your existing tables to another engine type, follow these steps:

  1. Stop the slave from running replication updates:

          mysql> STOP SLAVE;

     This will enable you to change engine types without interruptions.

  2. Execute an `ALTER TABLE ...  ENGINE='ENGINE_TYPE'' for each table
     to be changed.

  3. Start the slave replication process again:

          mysql> START SLAVE;

Although the `default_storage_engine' variable is not replicated, be
aware that *Note `CREATE TABLE': create-table. and *Note `ALTER TABLE':
alter-table.  statements that include the engine specification will be
correctly replicated to the slave. For example, if you have a CSV table
and you execute:

     mysql> ALTER TABLE csvtable Engine='MyISAM';

The above statement will be replicated to the slave and the engine type
on the slave will be converted to `MyISAM', even if you have previously
changed the table type on the slave to an engine other than CSV. If you
want to retain engine differences on the master and slave, you should
be careful to use the `default_storage_engine' variable on the master
when creating a new table. For example, instead of:

     mysql> CREATE TABLE tablea (columna int) Engine=MyISAM;

Use this format:

     mysql> SET default_storage_engine=MyISAM;
     mysql> CREATE TABLE tablea (columna int);

When replicated, the `default_storage_engine' variable will be ignored,
and the *Note `CREATE TABLE': create-table. statement will execute on
the slave using the slave's default engine.


File: manual.info,  Node: replication-solutions-scaleout,  Next: replication-solutions-partitioning,  Prev: replication-solutions-diffengines,  Up: replication-solutions

16.3.3 Using Replication for Scale-Out
--------------------------------------

You can use replication as a scale-out solution; that is, where you
want to split up the load of database queries across multiple database
servers, within some reasonable limitations.

Because replication works from the distribution of one master to one or
more slaves, using replication for scale-out works best in an
environment where you have a high number of reads and low number of
writes/updates. Most Web sites fit into this category, where users are
browsing the Web site, reading articles, posts, or viewing products.
Updates only occur during session management, or when making a purchase
or adding a comment/message to a forum.

Replication in this situation enables you to distribute the reads over
the replication slaves, while still enabling your web servers to
communicate with the replication master when a write is required. You
can see a sample replication layout for this scenario in *Note
figure_replication-scaleout::.

FIGURE GOES HERE: Using Replication to Improve Performance During
Scale-Out

If the part of your code that is responsible for database access has
been properly abstracted/modularized, converting it to run with a
replicated setup should be very smooth and easy. Change the
implementation of your database access to send all writes to the
master, and to send reads to either the master or a slave. If your code
does not have this level of abstraction, setting up a replicated system
gives you the opportunity and motivation to clean it up. Start by
creating a wrapper library or module that implements the following
functions:

   * `safe_writer_connect()'

   * `safe_reader_connect()'

   * `safe_reader_statement()'

   * `safe_writer_statement()'

`safe_' in each function name means that the function takes care of
handling all error conditions. You can use different names for the
functions. The important thing is to have a unified interface for
connecting for reads, connecting for writes, doing a read, and doing a
write.

Then convert your client code to use the wrapper library. This may be a
painful and scary process at first, but it pays off in the long run.
All applications that use the approach just described are able to take
advantage of a master/slave configuration, even one involving multiple
slaves. The code is much easier to maintain, and adding troubleshooting
options is trivial. You need modify only one or two functions; for
example, to log how long each statement took, or which statement among
those issued gave you an error.

If you have written a lot of code, you may want to automate the
conversion task by using the *Note `replace': replace-utility. utility
that comes with standard MySQL distributions, or write your own
conversion script. Ideally, your code uses consistent programming style
conventions. If not, then you are probably better off rewriting it
anyway, or at least going through and manually regularizing it to use a
consistent style.


File: manual.info,  Node: replication-solutions-partitioning,  Next: replication-solutions-performance,  Prev: replication-solutions-scaleout,  Up: replication-solutions

16.3.4 Replicating Different Databases to Different Slaves
----------------------------------------------------------

There may be situations where you have a single master and want to
replicate different databases to different slaves. For example, you may
want to distribute different sales data to different departments to
help spread the load during data analysis. A sample of this layout is
shown in *Note figure_replication-multi-db::.

FIGURE GOES HERE: Using Replication to Replicate Databases to Separate
Replication Slaves

You can achieve this separation by configuring the master and slaves as
normal, and then limiting the binary log statements that each slave
processes by using the `--replicate-wild-do-table' configuration option
on each slave.

*Important*:

You should _not_ use `--replicate-do-db' for this purpose when using
statement-based replication, since statement-based replication causes
this option's affects to vary according to the database that is
currently selected. This applies to mixed-format replication as well,
since this enables some updates to be replicated using the
statement-based format.

However, it should be safe to use `--replicate-do-db' for this purpose
if you are using row-based replication only, since in this case the
currently selected database has no effect on the option's operation.

For example, to support the separation as shown in *Note
figure_replication-multi-db::, you should configure each replication
slave as follows, before executing *Note `START SLAVE': start-slave.:

   * Replication slave 1 should use
     `--replicate-wild-do-table=databaseA.%'.

   * Replication slave 2 should use
     `--replicate-wild-do-table=databaseB.%'.

   * Replication slave 3 should use
     `--replicate-wild-do-table=databaseC.%'.

Each slave in this configuration receives the entire binary log from
the master, but executes only those events from the binary log that
apply to the databases and tables included by the
`--replicate-wild-do-table' option in effect on that slave.

If you have data that must be synchronized to the slaves before
replication starts, you have a number of choices:

   * Synchronize all the data to each slave, and delete the databases,
     tables, or both that you do not want to keep.

   * Use *Note `mysqldump': mysqldump. to create a separate dump file
     for each database and load the appropriate dump file on each slave.

   * Use a raw data file dump and include only the specific files and
     databases that you need for each slave.

     *Note*:

     This does not work with *Note `InnoDB': innodb-storage-engine.
     databases unless you use `innodb_file_per_table'.


File: manual.info,  Node: replication-solutions-performance,  Next: replication-solutions-switch,  Prev: replication-solutions-partitioning,  Up: replication-solutions

16.3.5 Improving Replication Performance
----------------------------------------

As the number of slaves connecting to a master increases, the load,
although minimal, also increases, as each slave uses a client
connection to the master. Also, as each slave must receive a full copy
of the master binary log, the network load on the master may also
increase and create a bottleneck.

If you are using a large number of slaves connected to one master, and
that master is also busy processing requests (for example, as part of a
scale-out solution), then you may want to improve the performance of
the replication process.

One way to improve the performance of the replication process is to
create a deeper replication structure that enables the master to
replicate to only one slave, and for the remaining slaves to connect to
this primary slave for their individual replication requirements. A
sample of this structure is shown in *Note
figure_replication-performance::.

FIGURE GOES HERE: Using an Additional Replication Host to Improve
Performance

For this to work, you must configure the MySQL instances as follows:

   * Master 1 is the primary master where all changes and updates are
     written to the database. Binary logging should be enabled on this
     machine.

   * Master 2 is the slave to the Master 1 that provides the
     replication functionality to the remainder of the slaves in the
     replication structure. Master 2 is the only machine permitted to
     connect to Master 1. Master 2 also has binary logging enabled, and
     the `--log-slave-updates' option so that replication instructions
     from Master 1 are also written to Master 2's binary log so that
     they can then be replicated to the true slaves.

   * Slave 1, Slave 2, and Slave 3 act as slaves to Master 2, and
     replicate the information from Master 2, which actually consists
     of the upgrades logged on Master 1.

The above solution reduces the client load and the network interface
load on the primary master, which should improve the overall
performance of the primary master when used as a direct database
solution.

If your slaves are having trouble keeping up with the replication
process on the master, there are a number of options available:

   * If possible, put the relay logs and the data files on different
     physical drives. To do this, use the `--relay-log' option to
     specify the location of the relay log.

   * If the slaves are significantly slower than the master, you may
     want to divide up the responsibility for replicating different
     databases to different slaves. See *Note
     replication-solutions-partitioning::.

   * If your master makes use of transactions and you are not concerned
     about transaction support on your slaves, use `MyISAM' or another
     nontransactional engine on the slaves. See *Note
     replication-solutions-diffengines::.

   * If your slaves are not acting as masters, and you have a potential
     solution in place to ensure that you can bring up a master in the
     event of failure, then you can switch off `--log-slave-updates'.
     This prevents `dumb' slaves from also logging events they have
     executed into their own binary log.


File: manual.info,  Node: replication-solutions-switch,  Next: replication-solutions-ssl,  Prev: replication-solutions-performance,  Up: replication-solutions

16.3.6 Switching Masters During Failover
----------------------------------------

There is currently no official solution for providing failover between
master and slaves in the event of a failure. With the currently
available features, you would have to set up a master and a slave (or
several slaves), and to write a script that monitors the master to
check whether it is up. Then instruct your applications and the slaves
to change master in case of failure.

Remember that you can tell a slave to change its master at any time,
using the *Note `CHANGE MASTER TO': change-master-to.  statement. The
slave will not check whether the databases on the master are compatible
with the slave, it will just start reading and executing events from
the specified binary log coordinates on the new master. In a failover
situation, all the servers in the group are typically executing the
same events from the same binary log file, so changing the source of
the events should not affect the database structure or integrity
providing you are careful.

Run your slaves with the `--log-bin' option and without
`--log-slave-updates'. In this way, the slave is ready to become a
master as soon as you issue *Note `STOP SLAVE': stop-slave.; *Note
`RESET MASTER': reset-master, and *Note `CHANGE MASTER TO':
change-master-to. statement on the other slaves. For example, assume
that you have the structure shown in *Note
figure_replication-redundancy-before::.

FIGURE GOES HERE: Redundancy Using Replication, Initial Structure

In this diagram, the `MySQL Master' holds the master database, the
`MySQL Slave' hosts are replication slaves, and the `Web Client'
machines are issuing database reads and writes. Web clients that issue
only reads (and would normally be connected to the slaves) are not
shown, as they do not need to switch to a new server in the event of
failure. For a more detailed example of a read/write scale-out
replication structure, see *Note replication-solutions-scaleout::.

Each MySQL Slave (`Slave 1', `Slave 2', and `Slave 3') is a slave
running with `--log-bin' and without `--log-slave-updates'. Because
updates received by a slave from the master are not logged in the
binary log unless `--log-slave-updates' is specified, the binary log on
each slave is empty initially. If for some reason `MySQL Master'
becomes unavailable, you can pick one of the slaves to become the new
master. For example, if you pick `Slave 1', all `Web Clients' should be
redirected to `Slave 1', which will log updates to its binary log.
`Slave 2' and `Slave 3' should then replicate from `Slave 1'.

The reason for running the slave without `--log-slave-updates' is to
prevent slaves from receiving updates twice in case you cause one of the
slaves to become the new master. Suppose that `Slave 1' has
`--log-slave-updates' enabled. Then it will write updates that it
receives from `Master' to its own binary log. When `Slave 2' changes
from `Master' to `Slave 1' as its master, it may receive updates from
`Slave 1' that it has already received from `Master'

Make sure that all slaves have processed any statements in their relay
log. On each slave, issue `STOP SLAVE IO_THREAD', then check the output
of *Note `SHOW PROCESSLIST': show-processlist. until you see `Has read
all relay log'. When this is true for all slaves, they can be
reconfigured to the new setup. On the slave `Slave 1' being promoted to
become the master, issue *Note `STOP SLAVE': stop-slave. and *Note
`RESET MASTER': reset-master.

On the other slaves `Slave 2' and `Slave 3', use *Note `STOP SLAVE':
stop-slave. and `CHANGE MASTER TO MASTER_HOST='Slave1'' (where
`'Slave1'' represents the real host name of `Slave 1'). To use *Note
`CHANGE MASTER TO': change-master-to, add all information about how to
connect to `Slave 1' from `Slave 2' or `Slave 3' (USER, PASSWORD,
PORT). In *Note `CHANGE MASTER TO': change-master-to, there is no need
to specify the name of the `Slave 1' binary log file or log position to
read from: We know it is the first binary log file and position 4,
which are the defaults for *Note `CHANGE MASTER TO': change-master-to.
Finally, use *Note `START SLAVE': start-slave. on `Slave 2' and `Slave
3'.

Once the new replication is in place, you will then need to instruct
each `Web Client' to direct its statements to `Slave 1'. From that
point on, all updates statements sent by `Web Client' to `Slave 1' are
written to the binary log of `Slave 1', which then contains every update
statement sent to `Slave 1' since `Master' died.

The resulting server structure is shown in *Note
figure_replication-redundancy-after::.

FIGURE GOES HERE: Redundancy Using Replication, After Master Failure

When `Master' is up again, you must issue on it the same *Note `CHANGE
MASTER TO': change-master-to. as that issued on `Slave 2' and `Slave
3', so that `Master' becomes a slave of `S1' and picks up each `Web
Client' writes that it missed while it was down.

To make `Master' a master again (for example, because it is the most
powerful machine), use the preceding procedure as if `Slave 1' was
unavailable and `Master' was to be the new master. During this
procedure, do not forget to run *Note `RESET MASTER': reset-master. on
`Master' before making `Slave 1', `Slave 2', and `Slave 3' slaves of
`Master'.  Otherwise, they may pick up old `Web Client' writes from
before the point at which `Master' became unavailable.

Note that there is no synchronization between the different slaves to a
master. Some slaves might be ahead of others. This means that the
concept outlined in the previous example might not work. In practice,
however, the relay logs of different slaves will most likely not be far
behind the master, so it would work, anyway (but there is no guarantee).

A good way to keep your applications informed as to the location of the
master is by having a dynamic DNS entry for the master.  With `bind'
you can use `nsupdate' to dynamically update your DNS.


File: manual.info,  Node: replication-solutions-ssl,  Next: replication-semisync,  Prev: replication-solutions-switch,  Up: replication-solutions

16.3.7 Setting Up Replication Using SSL
---------------------------------------

To use SSL for encrypting the transfer of the binary log required
during replication, both the master and the slave must support SSL
network connections. If either host does not support SSL connections
(because it has not been compiled or configured for SSL), replication
through an SSL connection is not possible.

Setting up replication using an SSL connection is similar to setting up
a server and client using SSL. You must obtain (or create) a suitable
security certificate that you can use on the master, and a similar
certificate (from the same certificate authority) on each slave.

For more information on setting up a server and client for SSL
connectivity, see *Note configuring-for-ssl::.

To enable SSL on the master you must create or obtain suitable
certificates, and then add the following configuration options to the
master's configuration within the `[mysqld]' section of the master's
`my.cnf' file:

     [mysqld]
     ssl-ca=CACERT.PEM
     ssl-cert=SERVER-CERT.PEM
     ssl-key=SERVER-KEY.PEM

The paths to the certificates may be relative or absolute; we recommend
that you always use complete paths for this purpose.

The options are as follows:

   * `ssl-ca' identifies the Certificate Authority (CA) certificate.

   * `ssl-cert' identifies the server public key.  This can be sent to
     the client and authenticated against the CA certificate that it
     has.

   * `ssl-key' identifies the server private key.

On the slave, you have two options available for setting the SSL
information. You can either add the slave certificates to the
`[client]' section of the slave's `my.cnf' file, or you can explicitly
specify the SSL information using the *Note `CHANGE MASTER TO':
change-master-to. statement:

   * To add the slave certificates using an option file, add the
     following lines to the `[client]' section of the slave's `my.cnf'
     file:

          [client]
          ssl-ca=CACERT.PEM
          ssl-cert=CLIENT-CERT.PEM
          ssl-key=CLIENT-KEY.PEM

     Restart the slave server, using the `--skip-slave-start' option to
     prevent the slave from connecting to the master. Use *Note `CHANGE
     MASTER TO': change-master-to. to specify the master configuration,
     using the `MASTER_SSL' option to enable SSL connectivity:

          mysql> CHANGE MASTER TO
              -> MASTER_HOST='master_hostname',
              -> MASTER_USER='replicate',
              -> MASTER_PASSWORD='password',
              -> MASTER_SSL=1;

   * To specify the SSL certificate options using the *Note `CHANGE
     MASTER TO': change-master-to. statement, append the SSL options:

          mysql> CHANGE MASTER TO
              -> MASTER_HOST='master_hostname',
              -> MASTER_USER='replicate',
              -> MASTER_PASSWORD='password',
              -> MASTER_SSL=1,
              -> MASTER_SSL_CA = 'ca_file_name',
              -> MASTER_SSL_CAPATH = 'ca_directory_name',
              -> MASTER_SSL_CERT = 'cert_file_name',
              -> MASTER_SSL_KEY = 'key_file_name';

After the master information has been updated, start the slave
replication process:

     mysql> START SLAVE;

You can use the *Note `SHOW SLAVE STATUS': show-slave-status.
statement to confirm that the SSL connection was established
successfully.

For more information on the *Note `CHANGE MASTER TO': change-master-to.
statement, see *Note change-master-to::.

If you want to enforce the use of SSL connections during replication,
then create a user with the `REPLICATION SLAVE' privilege and use the
`REQUIRE SSL' option for that user. For example:

     mysql> CREATE USER 'repl'@'%.mydomain.com' IDENTIFIED BY 'slavepass';
     mysql> GRANT REPLICATION SLAVE ON *.*
         -> TO 'repl'@'%.mydomain.com' REQUIRE SSL;

If the account already exists, you can add `REQUIRE SSL' to it with
this statement:

     mysql> GRANT USAGE ON *.*
         -> TO 'repl'@'%.mydomain.com' REQUIRE SSL;


File: manual.info,  Node: replication-semisync,  Prev: replication-solutions-ssl,  Up: replication-solutions

16.3.8 Semisynchronous Replication
----------------------------------

* Menu:

* replication-semisync-interface::  Semisynchronous Replication Administrative Interface
* replication-semisync-installation::  Semisynchronous Replication Installation and Configuration
* replication-semisync-monitoring::  Semisynchronous Replication Monitoring

In addition to the built-in asynchronous replication, MySQL 5.5
supports an interface to semisynchronous replication that is
implemented by plugins. This section discusses what semisynchronous
replication is and how it works. The following sections cover the
administrative interface to semisynchronous replication and how to
install, configure, and monitor it.

MySQL replication by default is asynchronous. The master writes events
to its binary log but does not know whether or when a slave has
retrieved and processed them. With asynchronous replication, if the
master crashes, transactions that it has committed might not have been
transmitted to any slave. Consequently, failover from master to slave
in this case may result in failover to a server that is missing
transactions relative to the master.

Semisynchronous replication can be used as an alternative to
asynchronous replication:

   * A slave indicates whether it is semisynchronous-capable when it
     connects to the master.

   * If semisynchronous replication is enabled on the master side and
     there is at least one semisynchronous slave, a thread that
     performs a transaction commit on the master blocks after the
     commit is done and waits until at least one semisynchronous slave
     acknowledges that it has received all events for the transaction,
     or until a timeout occurs.

   * The slave acknowledges receipt of a transaction's events only
     after the events have been written to its relay log and flushed to
     disk.

   * If a timeout occurs without any slave having acknowledged the
     transaction, the master reverts to asynchronous replication.  When
     at least one semisynchronous slave catches up, the master returns
     to semisynchronous replication.

   * Semisynchronous replication must be enabled on both the master and
     slave sides. If semisynchronous replication is disabled on the
     master, or enabled on the master but on no slaves, the master uses
     asynchronous replication.

While the master is blocking (waiting for acknowledgment from a slave
after having performed a commit), it does not return to the session
that performed the transaction. When the block ends, the master returns
to the session, which then can proceed to execute other statements. At
this point, the transaction has committed on the master side, and
receipt of its events has been acknowledged by at least one slave.

Blocking also occurs after rollbacks that are written to the binary
log, which occurs when a transaction that modifies nontransactional
tables is rolled back. The rolled-back transaction is logged even
though it has no effect for transactional tables because the
modifications to the nontransactional tables cannot be rolled back and
must be sent to slaves.

For statements that do not occur in transactional context (that is,
when no transaction has been started with *Note `START TRANSACTION':
commit. or *Note `SET autocommit = 0': set-statement.), autocommit is
enabled and each statement commits implicitly. With semisynchronous
replication, the master blocks after committing each such statement,
just as it does for explicit transaction commits.

To understand what the `semi' in `semisynchronous replication' means,
compare it with asynchronous and fully synchronous replication:

   * With asynchronous replication, the master writes events to its
     binary log and slaves request them when they are ready. There is
     no guarantee that any event will ever reach any slave.

   * With fully synchronous replication, when a master commits a
     transaction, all slaves also will have committed the transaction
     before the master returns to the session that performed the
     transaction. The drawback of this is that there might be a lot of
     delay to complete a transaction.

   * Semisynchronous replication falls between asynchronous and fully
     synchronous replication. The master waits after commit only until
     at least one slave has received and logged the events. It does not
     wait for all slaves to acknowledge receipt, and it requires only
     receipt, not that the events have been fully executed and
     committed on the slave side.

Compared to asynchronous replication, semisynchronous replication
provides improved data integrity. When a commit returns successfully,
it is known that the data exists in at least two places (on the master
and at least one slave). If the master commits but a crash occurs while
the master is waiting for acknowledgment from a slave, it is possible
that the transaction may not have reached any slave.

Semisynchronous replication also places a rate limit on busy sessions
by constraining the speed at which binary log events can be sent from
master to slave. When one user is too busy, this will slow it down,
which is useful in some deployment situations.

Semisynchronous replication does have some performance impact because
commits are slower due to the need to wait for slaves.  This is the
tradeoff for increased data integrity. The amount of slowdown is at
least the TCP/IP roundtrip time to send the commit to the slave and
wait for the acknowledgment of receipt by the slave. This means that
semisynchronous replication works best for close servers communicating
over fast networks, and worst for distant servers communicating over
slow networks.


File: manual.info,  Node: replication-semisync-interface,  Next: replication-semisync-installation,  Prev: replication-semisync,  Up: replication-semisync

16.3.8.1 Semisynchronous Replication Administrative Interface
.............................................................

The administrative interface to semisynchronous replication has several
components:

   * Two plugins implement semisynchronous capability. There is one
     plugin for the master side and one for the slave side.

   * System variables control plugin behavior. Some examples:

        * `rpl_semi_sync_master_enabled'

          Controls whether semisynchronous replication is enabled on
          the master. To enable or disable the plugin, set this
          variable to 1 or 0, respectively. The default is 0 (off).

        * `rpl_semi_sync_master_timeout'

          A value in milliseconds that controls how long the master
          waits on a commit for acknowledgment from a slave before
          timing out and reverting to asynchronous replication. The
          default value is 10000 (10 seconds).

        * `rpl_semi_sync_slave_enabled'

          Similar to `rpl_semi_sync_master_enabled', but controls the
          slave plugin.

     All `rpl_semi_sync_XXX' system variables are described at *Note
     server-system-variables::.

   * Status variables enable semisynchronous replication monitoring.
     Some examples:

        * `Rpl_semi_sync_master_clients'

          The number of semisynchronous slaves.

        * `Rpl_semi_sync_master_status'

          Whether semisynchronous replication currently is operational
          on the master. The value is 1 if the plugin has been enabled
          and a commit acknowledgment has occurred. It is 0 if the
          plugin is not enabled or the master has fallen back to
          asynchronous replication due to commit acknowledgment timeout.

        * `Rpl_semi_sync_master_no_tx'

          The number of commits that were not acknowledged successfully
          by a slave.

        * `Rpl_semi_sync_master_yes_tx'

          The number of commits that were acknowledged successfully by
          a slave.

        * `Rpl_semi_sync_slave_status'

          Whether semisynchronous replication currently is operational
          on the slave. This is 1 if the plugin has been enabled and
          the slave I/O thread is running, 0 otherwise.

     All `Rpl_semi_sync_XXX' status variables are described at *Note
     server-status-variables::.

The system and status variables are available only if the appropriate
master or slave plugin has been installed with *Note `INSTALL PLUGIN':
install-plugin.


File: manual.info,  Node: replication-semisync-installation,  Next: replication-semisync-monitoring,  Prev: replication-semisync-interface,  Up: replication-semisync

16.3.8.2 Semisynchronous Replication Installation and Configuration
...................................................................

Semisynchronous replication is implemented using plugins, so the
plugins must be installed into the server to make them available. After
a plugin has been installed, you control it by means of the system
variables associated with it. These system variables are unavailable
until the associated plugin has been installed.

To use semisynchronous replication, the following requirements must be
satisfied:

   * MySQL 5.5 or higher must be installed.

   * The capability of installing plugins requires a MySQL server that
     supports dynamic loading. To verify this, check that the value of
     the `have_dynamic_loading' system variable is `YES'. Binary
     distributions should support dynamic loading.

   * Replication must already be working. For information on creating a
     master/slave relationship, see *Note replication-howto::.

To set up semisynchronous replication, use the following instructions.
The *Note `INSTALL PLUGIN': install-plugin, *Note `SET GLOBAL':
set-statement, *Note `STOP SLAVE': stop-slave, and *Note `START SLAVE':
start-slave. statements mentioned here require the `SUPER' privilege.

The semisynchronous replication plugins are included with MySQL
distributions.

Unpack the component distribution, which contains files for the master
side and the slave side.

Install the component files in the plugin directory of the appropriate
server. Install the `semisync_master*' files in the plugin directory of
the master server. Install the `semisync_slave*' files in the plugin
directory of each slave server. The location of the plugin directory is
available as the value of the server's `plugin_dir' system variable.

To load the plugins, use the *Note `INSTALL PLUGIN': install-plugin.
statement on the master and on each slave that is to be semisynchronous.

On the master:

     mysql> INSTALL PLUGIN rpl_semi_sync_master SONAME 'semisync_master.so';

On each slave:

     mysql> INSTALL PLUGIN rpl_semi_sync_slave SONAME 'semisync_slave.so';

The preceding commands use a plugin file name suffix of `.so'. A
different suffix might apply on your system. If you are not sure about
the plugin file name, look for the plugins in the server's plugin
directory.

If an attempt to install a plugin results in an error on Linux similar
to that shown here, you will need to install `libimf':

     mysql> INSTALL PLUGIN rpl_semi_sync_master SONAME 'semisync_master.so';
     ERROR 1126 (HY000): Can't open shared library
     '/usr/local/mysql/lib/plugin/semisync_master.so' (errno: 22 libimf.so: cannot open
     shared object file: No such file or directory)

You can obtain `libimf' from
`http://dev.mysql.com/downloads/os-linux.html'.

To see which plugins are installed, use the *Note `SHOW PLUGINS':
show-plugins. statement, or query the *Note
`INFORMATION_SCHEMA.PLUGINS': plugins-table.  table.

After a semisynchronous replication plugin has been installed, it is
disabled by default. The plugins must be enabled both on the master
side and the slave side to enable semisynchronous replication. If only
one side is enabled, replication will be asynchronous.

To control whether an installed plugin is enabled, set the appropriate
system variables. You can set these variables at runtime using *Note
`SET GLOBAL': set-statement, or at server startup on the command line
or in an option file.

At runtime, these master-side system variables are available:

     mysql> SET GLOBAL rpl_semi_sync_master_enabled = {0|1};
     mysql> SET GLOBAL rpl_semi_sync_master_timeout = N;

On the slave side, this system variable is available:

     mysql> SET GLOBAL rpl_semi_sync_slave_enabled = {0|1};

For `rpl_semi_sync_master_enabled' or `rpl_semi_sync_slave_enabled',
the value should be 1 to enable semisynchronous replication or 0 to
disable it. By default, these variables are set to 1.

For `rpl_semi_sync_master_timeout', the value N is given in
milliseconds.  The default value is 10000 (10 seconds).

If you enable semisynchronous replication on a slave at runtime, you
must also start the slave I/O thread (stopping it first if it is
already running) to cause the slave to connect to the master and
register as a semisynchronous slave:

     mysql> STOP SLAVE IO_THREAD; START SLAVE IO_THREAD;

If the I/O thread is already running and you do not restart it, the
slave continues to use asynchronous replication.

At server startup, the variables that control semisynchronous
replication can be set as command-line options or in an option file. A
setting listed in an option file takes effect each time the server
starts. For example, you can set the variables in `my.cnf' files on the
master and slave sides as follows.

On the master:

     [mysqld]
     rpl_semi_sync_master_enabled=1
     rpl_semi_sync_master_timeout=1000 # 1 second

On each slave:

     [mysqld]
     rpl_semi_sync_slave_enabled=1


File: manual.info,  Node: replication-semisync-monitoring,  Prev: replication-semisync-installation,  Up: replication-semisync

16.3.8.3 Semisynchronous Replication Monitoring
...............................................

The plugins for the semisynchronous replication capability expose
several system and status variables that you can examine to determine
its configuration and operational state.

The system variable reflect how semisynchronous replication is
configured. To check their values, use *Note `SHOW VARIABLES':
show-variables.:

     mysql> SHOW VARIABLES LIKE 'rpl_semi_sync%';

The status variables enable you to monitor the operation of
semisynchronous replication. To check their values, use *Note `SHOW
STATUS': show-status.:

     mysql> SHOW STATUS LIKE 'Rpl_semi_sync%';

When the master switches between asynchronous or semisynchronous
replication due to commit-blocking timeout or a slave catching up, it
sets the value of the `Rpl_semi_sync_master_status' status variable
appropriately. Automatic fallback from semisynchronous to asynchronous
replication on the master means that it is possible for the
`rpl_semi_sync_master_enabled' system variable to have a value of 1 on
the master side even when semisynchronous replication is in fact not
operational at the moment. You can monitor the
`Rpl_semi_sync_master_status' status variable to determine whether the
master currently is using asynchronous or semisynchronous replication.

To see how many semisynchronous slaves are connected, check
`Rpl_semi_sync_master_clients'.

The number of commits that have been acknowledged successfully or
unsuccessfully by slaves are indicated by the
`Rpl_semi_sync_master_yes_tx' and `Rpl_semi_sync_master_no_tx'
variables.

On the slave side, `Rpl_semi_sync_slave_status' indicates whether
semisynchronous replication currently is operational.


File: manual.info,  Node: replication-notes,  Prev: replication-solutions,  Up: replication

16.4 Replication Notes and Tips
===============================

* Menu:

* replication-features::         Replication Features and Issues
* replication-compatibility::    Replication Compatibility Between MySQL Versions
* replication-upgrade::          Upgrading a Replication Setup
* replication-problems::         Troubleshooting Replication
* replication-bugs::             How to Report Replication Bugs or Problems


File: manual.info,  Node: replication-features,  Next: replication-compatibility,  Prev: replication-notes,  Up: replication-notes

16.4.1 Replication Features and Issues
--------------------------------------

* Menu:

* replication-features-auto-increment::  Replication and `AUTO_INCREMENT'
* replication-features-blackhole::  Replication and `BLACKHOLE' Tables
* replication-features-charset::  Replication and Character Sets
* replication-features-create-if-not-exists::  Replication of `CREATE ... IF NOT EXISTS' Statements
* replication-features-create-select::  Replication of `CREATE TABLE ... SELECT' Statements
* replication-features-create-alter-drop-server::  Replication of `CREATE SERVER', `ALTER SERVER', and `DROP SERVER'
* replication-features-current-user::  Replication of `CURRENT_USER()'
* replication-features-drop-if-exists::  Replication of `DROP ... IF EXISTS' Statements
* replication-features-differing-tables::  Replication with Differing Table Definitions on Master and Slave
* replication-features-directory::  Replication and `DIRECTORY' Table Options
* replication-features-invoked::  Replication of Invoked Features
* replication-features-floatvalues::  Replication and Floating-Point Values
* replication-features-flush::   Replication and `FLUSH'
* replication-features-functions::  Replication and System Functions
* replication-features-limit::   Replication and `LIMIT'
* replication-features-load-data::  Replication and `LOAD DATA INFILE'
* replication-features-logging::  Replication and the Slow Query Log
* replication-features-repair-table::  Replication and `REPAIR TABLE'
* replication-features-shutdowns::  Replication and Master or Slave Shutdowns
* replication-features-max-allowed-packet::  Replication and `max_allowed_packet'
* replication-features-memory::  Replication and `MEMORY' Tables
* replication-features-temptables::  Replication and Temporary Tables
* replication-features-mysqldb::  Replication of the `mysql' System Database
* replication-features-optimizer::  Replication and the Query Optimizer
* replication-features-reserved-words::  Replication and Reserved Words
* replication-features-set-password::  `SET PASSWORD' and Row-Based Replication
* replication-features-slaveerrors::  Slave Errors During Replication
* replication-features-sql-mode::  Replication and Server SQL Mode
* replication-features-timeout::  Replication Retries and Timeouts
* replication-features-timestamp::  Replication and `TIMESTAMP'
* replication-features-timezone::  Replication and Time Zones
* replication-features-transactions::  Replication and Transactions
* replication-features-triggers::  Replication and Triggers
* replication-features-truncate::  Replication and `TRUNCATE TABLE'
* replication-features-variables::  Replication and Variables
* replication-features-views::   Replication and Views

The following sections provide information about what is supported and
what is not in MySQL replication, and about specific issues and
situations that may occur when replicating certain statements.

Statement-based replication depends on compatibility at the SQL level
between the master and slave. In others, successful SBR requires that
any SQL features used be supported by both the master and the slave
servers. For example, if you use a feature on the master server that is
available only in MySQL 5.5 (or later), you cannot replicate to a slave
that uses MySQL 5.1 (or earlier).

Such incompatibilities also can occur within a release series when
using pre-production releases of MySQL. For example, the `SLEEP()'
function is available beginning with MySQL 5.0.12. If you use this
function on the master, you cannot replicate to a slave that uses MySQL
5.0.11 or earlier.

For this reason, use Generally Available (GA) releases of MySQL for
statement-based replication in a production setting, since we do not
introduce new SQL statements or change their behavior within a given
release series once that series reaches GA release status.

If you are planning to use statement-based replication between MySQL
5.5 and a previous MySQL release series, it is also a good idea to
consult the edition of the `MySQL Reference Manual' corresponding to
the earlier release series for information regarding the replication
characteristics of that series.

With MySQL's statement-based replication, there may be issues with
replicating stored routines or triggers. You can avoid these issues by
using MySQL's row-based replication instead. For a detailed list of
issues, see *Note stored-programs-logging::. For more information about
row-based logging and row-based replication, see *Note
binary-log-formats::, and *Note replication-formats::.

For additional information specific to replication and `InnoDB', see
*Note innodb-and-mysql-replication::. For information relating to
replication with MySQL Cluster, see *Note mysql-cluster-replication::.


File: manual.info,  Node: replication-features-auto-increment,  Next: replication-features-blackhole,  Prev: replication-features,  Up: replication-features

16.4.1.1 Replication and `AUTO_INCREMENT'
.........................................

Statement-based replication of `AUTO_INCREMENT', `LAST_INSERT_ID()', and
*Note `TIMESTAMP': datetime. values is done correctly, subject to the
following exceptions:

   * When using statement-based replication prior to MySQL 5.5.30,
     `AUTO_INCREMENT' columns in tables on the slave must match the
     same columns on the master; that is, `AUTO_INCREMENT' columns must
     be replicated to `AUTO_INCREMENT' columns.  (Bug #12669186)

   * A statement invoking a trigger or function that causes an update
     to an `AUTO_INCREMENT' column is not replicated correctly using
     statement-based replication. In MySQL 5.5, such statements are
     marked as unsafe. (Bug #45677)

   * An *Note `INSERT': insert. into a table that has a composite
     primary key that includes an `AUTO_INCREMENT' column that is not
     the first column of this composite key is not safe for
     statement-based logging or replication. Beginning with MySQL
     5.5.25, such statements are marked as unsafe. (Bug #11754117, Bug
     #45670)

     This issue does not affect tables using the *Note `InnoDB':
     innodb-storage-engine. storage engine, since an `InnoDB' table
     with an AUTO_INCREMENT column requires at least one key where the
     auto-increment column is the only or leftmost column.

   * Adding an `AUTO_INCREMENT' column to a table with *Note `ALTER
     TABLE': alter-table. might not produce the same ordering of the
     rows on the slave and the master. This occurs because the order in
     which the rows are numbered depends on the specific storage engine
     used for the table and the order in which the rows were inserted.
     If it is important to have the same order on the master and slave,
     the rows must be ordered before assigning an `AUTO_INCREMENT'
     number. Assuming that you want to add an `AUTO_INCREMENT' column
     to a table `t1' that has columns `col1' and `col2', the following
     statements produce a new table `t2' identical to `t1' but with an
     `AUTO_INCREMENT' column:

          CREATE TABLE t2 LIKE t1;
          ALTER TABLE t2 ADD id INT AUTO_INCREMENT PRIMARY KEY;
          INSERT INTO t2 SELECT * FROM t1 ORDER BY col1, col2;

     *Important*:

     To guarantee the same ordering on both master and slave, the
     `ORDER BY' clause must name _all_ columns of `t1'.

     The instructions just given are subject to the limitations of
     `CREATE TABLE ... LIKE': Foreign key definitions are ignored, as
     are the `DATA DIRECTORY' and `INDEX DIRECTORY' table options. If a
     table definition includes any of those characteristics, create
     `t2' using a *Note `CREATE TABLE': create-table. statement that is
     identical to the one used to create `t1', but with the addition of
     the `AUTO_INCREMENT' column.

     Regardless of the method used to create and populate the copy
     having the `AUTO_INCREMENT' column, the final step is to drop the
     original table and then rename the copy:

          DROP t1;
          ALTER TABLE t2 RENAME t1;

     See also *Note alter-table-problems::.


File: manual.info,  Node: replication-features-blackhole,  Next: replication-features-charset,  Prev: replication-features-auto-increment,  Up: replication-features

16.4.1.2 Replication and `BLACKHOLE' Tables
...........................................

The *Note `BLACKHOLE': blackhole-storage-engine. storage engine accepts
data but discards it and does not store it. When performing binary
logging, all inserts to such tables are always logged, regardless of
the logging format in use. Updates and deletes are handled differently
depending on whether statement based or row based logging is in use.
With the statement based logging format, all statements affecting
`BLACKHOLE' tables are logged, but their effects ignored. When using
row-based logging, updates and deletes to such tables are simply
skipped--they are not written to the binary log. In MySQL 5.5.32 and
later, a warning is logged whenever this occurs (Bug #13004581)

For this reason we recommend when you replicate to tables using the
*Note `BLACKHOLE': blackhole-storage-engine. storage engine that you
have the `binlog_format' server variable set to `STATEMENT', and not to
either `ROW' or `MIXED'.


File: manual.info,  Node: replication-features-charset,  Next: replication-features-create-if-not-exists,  Prev: replication-features-blackhole,  Up: replication-features

16.4.1.3 Replication and Character Sets
.......................................

The following applies to replication between MySQL servers that use
different character sets:

   * If the master uses MySQL 4.1, you must _always_ use the same
     _global_ character set and collation on the master and the slave,
     regardless of the slave MySQL version. (These are controlled by the
     `--character-set-server' and `--collation-server' options.)
     Otherwise, you may get duplicate-key errors on the slave, because
     a key that is unique in the master character set might not be
     unique in the slave character set. Note that this is not a cause
     for concern when master and slave are both MySQL 5.0 or later.

   * If the master is older than MySQL 4.1.3, the character set of any
     client should never be made different from its global value
     because this character set change is not known to the slave. In
     other words, clients should not use `SET NAMES', `SET CHARACTER
     SET', and so forth. If both the master and the slave are 4.1.3 or
     newer, clients can freely set session values for character set
     variables because these settings are written to the binary log and
     so are known to the slave. That is, clients can use `SET NAMES' or
     `SET CHARACTER SET' or can set variables such as
     `collation_client' or `collation_server'. However, clients are
     prevented from changing the _global_ value of these variables; as
     stated previously, the master and slave must always have identical
     global character set values. This is true whether you are using
     statement-based or row-based replication.

   * If the master has databases with a character set different from
     the global `character_set_server' value, you should design your
     *Note `CREATE TABLE': create-table. statements so that they do not
     implicitly rely on the database default character set. A good
     workaround is to state the character set and collation explicitly
     in *Note `CREATE TABLE': create-table.  statements.


File: manual.info,  Node: replication-features-create-if-not-exists,  Next: replication-features-create-select,  Prev: replication-features-charset,  Up: replication-features

16.4.1.4 Replication of `CREATE ... IF NOT EXISTS' Statements
.............................................................

MySQL applies these rules when various `CREATE ... IF NOT EXISTS'
statements are replicated:

   * Every *Note `CREATE DATABASE IF NOT EXISTS': create-database.
     statement is replicated, whether or not the database already
     exists on the master.

   * Similarly, every *Note `CREATE TABLE IF NOT EXISTS': create-table.
     statement without a *Note `SELECT': select. is replicated, whether
     or not the table already exists on the master. This includes *Note
     `CREATE TABLE IF NOT EXISTS ... LIKE': create-table. Replication of
     *Note `CREATE TABLE IF NOT EXISTS ... SELECT': create-table.
     follows somewhat different rules; see *Note
     replication-features-create-select::, for more information.

   * *Note `CREATE EVENT IF NOT EXISTS': create-event. is always
     replicated in MySQL 5.5, whether or not the event named in the
     statement already exists on the master.

See also Bug #45574.


File: manual.info,  Node: replication-features-create-select,  Next: replication-features-create-alter-drop-server,  Prev: replication-features-create-if-not-exists,  Up: replication-features

16.4.1.5 Replication of `CREATE TABLE ... SELECT' Statements
............................................................

This section discusses how MySQL replicates *Note `CREATE TABLE ...
SELECT': create-table-select. statements.

These behaviors are not dependent on MySQL version:

   * *Note `CREATE TABLE ... SELECT': create-table-select. always
     performs an implicit commit (*Note implicit-commit::).

   * If destination table does not exist, logging occurs as follows. It
     does not matter whether `IF NOT EXISTS' is present.

        * `STATEMENT' or `MIXED' format: The statement is logged as
          written.

        * `ROW' format: The statement is logged as a *Note `CREATE
          TABLE': create-table.  statement followed by a series of
          insert-row events.

   * If the statement fails, nothing is logged. This includes the case
     that the destination table exists and `IF NOT EXISTS' is not given.

When the destination table exists and `IF NOT EXISTS' is given, MySQL
handles the statement in a version-dependent way.

In MySQL 5.1 before 5.1.51 and in MySQL 5.5 before 5.5.6 (this is the
original behavior):

   * `STATEMENT' or `MIXED' format: The statement is logged as written.

   * `ROW' format: The statement is logged as a *Note `CREATE TABLE':
     create-table. statement followed by a series of insert-row events.

In MySQL 5.1 as of 5.1.51:

   * `STATEMENT' or `MIXED' format: The statement is logged as the
     equivalent pair of *Note `CREATE TABLE': create-table. and *Note
     `INSERT INTO ... SELECT': insert-select. statements.

   * `ROW' format: The statement is logged as a *Note `CREATE TABLE':
     create-table. statement followed by a series of insert-row events.

In MySQL 5.5 as of 5.5.6:

   * Nothing is inserted or logged.

These version dependencies arise due to a change in MySQL 5.5.6 in
handling of *Note `CREATE TABLE ... SELECT': create-table-select. not
to insert rows if the destination table already exists, and a change
made in MySQL 5.1.51 to preserve forward compatibility in replication
of such statements from a 5.1 master to a 5.5 slave. For details, see
*Note create-table-select::.

When using statement-based replication between a MySQL 5.6 or later
slave and a master running a previous version of MySQL, a *Note `CREATE
TABLE ... SELECT': create-table-select. statement causing changes in
other tables on the master fails on the slave, causing replication to
stop. This is due to the fact that MySQL 5.6 does not allow a *Note
`CREATE TABLE ... SELECT': create-table-select. statement to make any
changes in tables other than the table that is created by the
statement--a change in behavior from previous versions of MySQL, which
permitted these statements to do so. To keep this from happening, you
should use row-based replication, rewrite the offending statement
before running it on the master, or upgrade the master to MySQL 5.6 (or
later). (If you choose to upgrade the master, keep in mind that such a
*Note `CREATE TABLE ... SELECT': create-table-select. statement will
fail there as well, following the upgrade, unless the statement is
rewritten to remove any side effects on other tables.) This is not an
issue when using row-based replication, because the statement is logged
as a *Note `CREATE TABLE': create-table.  statement with any changes to
table data logged as row-insert events (or possibly row-update events),
rather than as the entire *Note `CREATE TABLE ... SELECT':
create-table-select. statement.


File: manual.info,  Node: replication-features-create-alter-drop-server,  Next: replication-features-current-user,  Prev: replication-features-create-select,  Up: replication-features

16.4.1.6 Replication of `CREATE SERVER', `ALTER SERVER', and `DROP SERVER'
..........................................................................

In MySQL 5.5, the statements *Note `CREATE SERVER': create-server,
*Note `ALTER SERVER': alter-server, and *Note `DROP SERVER':
drop-server. are not written to the binary log, regardless of the
binary logging format that is in use.


File: manual.info,  Node: replication-features-current-user,  Next: replication-features-drop-if-exists,  Prev: replication-features-create-alter-drop-server,  Up: replication-features

16.4.1.7 Replication of `CURRENT_USER()'
........................................

The following statements support use of the `CURRENT_USER()' function
to take the place of the name of (and, possibly, the host for) an
affected user or a definer; in such cases, `CURRENT_USER()' is expanded
where and as needed:

   * *Note `DROP USER': drop-user.

   * *Note `RENAME USER': rename-user.

   * *Note `GRANT': grant.

   * *Note `REVOKE': revoke.

   * *Note `CREATE FUNCTION': create-function.

   * *Note `CREATE PROCEDURE': create-procedure.

   * *Note `CREATE TRIGGER': create-trigger.

   * *Note `CREATE EVENT': create-event.

   * *Note `CREATE VIEW': create-view.

   * *Note `ALTER EVENT': alter-event.

   * *Note `ALTER VIEW': alter-view.

   * *Note `SET PASSWORD': set-password.

When `CURRENT_USER()' or `CURRENT_USER' is used as the definer in any
of the statements *Note `CREATE FUNCTION': create-function, *Note
`CREATE PROCEDURE': create-procedure, *Note `CREATE TRIGGER':
create-trigger, *Note `CREATE EVENT': create-event, *Note `CREATE
VIEW': create-view, or *Note `ALTER VIEW': alter-view. when binary
logging is enabled, the function reference is expanded before it is
written to the binary log, so that the statement refers to the same user
on both the master and the slave when the statement is replicated.
`CURRENT_USER()' or `CURRENT_USER' is also expanded prior to being
written to the binary log when used in *Note `DROP USER': drop-user,
*Note `RENAME USER': rename-user, *Note `GRANT': grant, *Note `REVOKE':
revoke, or *Note `ALTER EVENT': alter-event.


File: manual.info,  Node: replication-features-drop-if-exists,  Next: replication-features-differing-tables,  Prev: replication-features-current-user,  Up: replication-features

16.4.1.8 Replication of `DROP ... IF EXISTS' Statements
.......................................................

The *Note `DROP DATABASE IF EXISTS': drop-database, *Note `DROP TABLE
IF EXISTS': drop-table, and *Note `DROP VIEW IF EXISTS': drop-view.
statements are always replicated, even if the database, table, or view
to be dropped does not exist on the master. This is to ensure that the
object to be dropped no longer exists on either the master or the
slave, once the slave has caught up with the master.

`DROP ... IF EXISTS' statements for stored programs (stored procedures
and functions, triggers, and events) are also replicated, even if the
stored program to be dropped does not exist on the master.


File: manual.info,  Node: replication-features-differing-tables,  Next: replication-features-directory,  Prev: replication-features-drop-if-exists,  Up: replication-features

16.4.1.9 Replication with Differing Table Definitions on Master and Slave
.........................................................................

* Menu:

* replication-features-more-columns::  Replication with More Columns on Master or Slave
* replication-features-different-data-types::  Replication of Columns Having Different Data Types

Source and target tables for replication do not have to be identical. A
table on the master can have more or fewer columns than the slave's
copy of the table. In addition, corresponding table columns on the
master and the slave can use different data types, subject to certain
conditions.

In all cases where the source and target tables do not have identical
definitions, the database and table names must be the same on both the
master and the slave. Additional conditions are discussed, with
examples, in the following two sections.


File: manual.info,  Node: replication-features-more-columns,  Next: replication-features-different-data-types,  Prev: replication-features-differing-tables,  Up: replication-features-differing-tables

16.4.1.10 Replication with More Columns on Master or Slave
..........................................................

You can replicate a table from the master to the slave such that the
master and slave copies of the table have differing numbers of columns,
subject to the following conditions:

   * Columns common to both versions of the table must be defined in
     the same order on the master and the slave.

     (This is true even if both tables have the same number of columns.)

   * Columns common to both versions of the table must be defined
     before any additional columns.

     This means that executing an *Note `ALTER TABLE': alter-table.
     statement on the slave where a new column is inserted into the
     table within the range of columns common to both tables causes
     replication to fail, as shown in the following example:

     Suppose that a table `t', existing on the master and the slave, is
     defined by the following *Note `CREATE TABLE': create-table.
     statement:

          CREATE TABLE t (
              c1 INT,
              c2 INT,
              c3 INT
          );

     Suppose that the *Note `ALTER TABLE': alter-table. statement shown
     here is executed on the slave:

          ALTER TABLE t ADD COLUMN cnew1 INT AFTER c3;

     The previous *Note `ALTER TABLE': alter-table. is permitted on the
     slave because the columns `c1', `c2', and `c3' that are common to
     both versions of table `t' remain grouped together in both
     versions of the table, before any columns that differ.

     However, the following *Note `ALTER TABLE': alter-table. statement
     cannot be executed on the slave without causing replication to
     break:

          ALTER TABLE t ADD COLUMN cnew2 INT AFTER c2;

     Replication fails after execution on the slave of the *Note `ALTER
     TABLE': alter-table. statement just shown, because the new column
     `cnew2' comes between columns common to both versions of `t'.

   * Each `extra' column in the version of the table having more
     columns must have a default value.

     *Note*:

     A column's default value is determined by a number of factors,
     including its type, whether it is defined with a `DEFAULT' option,
     whether it is declared as `NULL', and the server SQL mode in
     effect at the time of its creation; for more information, see
     *Note data-type-defaults::).

In addition, when the slave's copy of the table has more columns than
the master's copy, each column common to the tables must use the same
data type in both tables.

Examples

The following examples illustrate some valid and invalid table
definitions:

More columns on the master

The following table definitions are valid and replicate correctly:

     master> CREATE TABLE t1 (c1 INT, c2 INT, c3 INT);
     slave>  CREATE TABLE t1 (c1 INT, c2 INT);

The following table definitions would raise Error 1532
(`ER_BINLOG_ROW_RBR_TO_SBR') because the definitions of the columns
common to both versions of the table are in a different order on the
slave than they are on the master:

     master> CREATE TABLE t1 (c1 INT, c2 INT, c3 INT);
     slave>  CREATE TABLE t1 (c2 INT, c1 INT);

The following table definitions would also raise Error 1532 because the
definition of the extra column on the master appears before the
definitions of the columns common to both versions of the table:

     master> CREATE TABLE t1 (c3 INT, c1 INT, c2 INT);
     slave>  CREATE TABLE t1 (c1 INT, c2 INT);

More columns on the slave

The following table definitions are valid and replicate correctly:

     master> CREATE TABLE t1 (c1 INT, c2 INT);
     slave>  CREATE TABLE t1 (c1 INT, c2 INT, c3 INT);

The following definitions raise Error 1532 because the columns common
to both versions of the table are not defined in the same order on both
the master and the slave:

     master> CREATE TABLE t1 (c1 INT, c2 INT);
     slave>  CREATE TABLE t1 (c2 INT, c1 INT, c3 INT);

The following table definitions also raise Error 1532 because the
definition for the extra column in the slave's version of the table
appears before the definitions for the columns which are common to both
versions of the table:

     master> CREATE TABLE t1 (c1 INT, c2 INT);
     slave>  CREATE TABLE t1 (c3 INT, c1 INT, c2 INT);

The following table definitions fail because the slave's version of the
table has additional columns compared to the master's version, and the
two versions of the table use different data types for the common column
`c2':

     master> CREATE TABLE t1 (c1 INT, c2 BIGINT);
     slave>  CREATE TABLE t1 (c1 INT, c2 INT, c3 INT);


File: manual.info,  Node: replication-features-different-data-types,  Prev: replication-features-more-columns,  Up: replication-features-differing-tables

16.4.1.11 Replication of Columns Having Different Data Types
............................................................

Corresponding columns on the master's and the slave's copies of the
same table ideally should have the same data type. However, beginning
with MySQL 5.1.21, this is not always strictly enforced, as long as
certain conditions are met.

All other things being equal, it is always possible to replicate from a
column of a given data type to another column of the same type and same
size or width, where applicable, or larger. For example, you can
replicate from a `CHAR(10)' column to another `CHAR(10)', or from a
`CHAR(10)' column to a `CHAR(25)' column without any problems. In
certain cases, it also possible to replicate from a column having one
data type (on the master) to a column having a different data type (on
the slave); when the data type of the master's version of the column is
promoted to a type that is the same size or larger on the slave, this
is known as _attribute promotion_.

Attribute promotion can be used with both statement-based and row-based
replication, and is not dependent on the storage engine used by either
the master or the slave. However, the choice of logging format does
have an effect on the type conversions that are permitted; the
particulars are discussed later in this section.

*Important*:

Whether you use statement-based or row-based replication, the slave's
copy of the table cannot contain more columns than the master's copy if
you wish to employ attribute promotion.

Statement-based replication

When using statement-based replication, a simple rule of thumb to
follow is, `If the statement run on the master would also execute
successfully on the slave, it should also replicate successfully'. In
other words, if the statement uses a value that is compatible with the
type of a given column on the slave, the statement can be replicated.
For example, you can insert any value that fits in a `TINYINT' column
into a `BIGINT' column as well; it follows that, even if you change the
type of a `TINYINT' column in the slave's copy of a table to `BIGINT',
any insert into that column on the master that succeeds should also
succeed on the slave, since it is impossible to have a legal `TINYINT'
value that is large enough to exceed a `BIGINT' column.

Prior to MySQL 5.5.30, when using statement-based replication,
`AUTO_INCREMENT' columns were required to be the same on both the
master and the slave; otherwise, updates could be applied to the wrong
table on the slave. (Bug #12669186)

Row-based replication: attribute promotion and demotion

Formerly, due to the fact that in row-based replication changes rather
than statements are replicated, and that these changes are transmitted
using formats that do not always map directly to MySQL server column
data types, you could not replicate between different subtypes of the
same general type (for example, from `TINYINT' to `BIGINT', both `INT'
subtypes). However, beginning with MySQL 5.5.3, MySQL Replication
supports attribute promotion and demotion between smaller data types
and larger types. It is also possible to specify whether or not to
permit lossy (truncated) or non-lossy conversions of demoted column
values, as explained later in this section.

Lossy and non-lossy conversions

In the event that the target type cannot represent the value being
inserted, a decision must be made on how to handle the conversion. If
we permit the conversion but truncate (or otherwise modify) the source
value to achieve a `fit' in the target column, we make what is known as
a _lossy conversion_. A conversion which does not require truncation or
similar modifications to fit the source column value in the target
column is a _non-lossy_ conversion.

Type conversion modes (`slave_type_conversions' variable)

The setting of the `slave_type_conversions' global server variable
controls the type conversion mode used on the slave. This variable
takes a set of values from the following table, which shows the effects
of each mode on the slave's type-conversion behavior:

This table shows type conversion modes for the `slave_type_conversions'
global server variable and describes the effects of each mode on the
slave's type-conversion behavior.

Mode                      Effect
`ALL_LOSSY'               In this mode, type conversions that would mean
                          loss of information are permitted.
                          
                          This does not imply that non-lossy conversions
                          are permitted, merely that only cases
                          requiring either lossy conversions or no
                          conversion at all are permitted; for example,
                          enabling _only_ this mode permits an `INT'
                          column to be converted to `TINYINT' (a lossy
                          conversion), but not a `TINYINT' column to an
                          `INT' column (non-lossy).  Attempting the
                          latter conversion in this case would cause
                          replication to stop with an error on the slave.
`ALL_NON_LOSSY'           This mode permits conversions that do not
                          require truncation or other special handling
                          of the source value; that is, it permits
                          conversions where the target type has a wider
                          range than the source type.
                          
                          Setting this mode has no bearing on whether
                          lossy conversions are permitted; this is
                          controlled with the `ALL_LOSSY' mode. If only
                          `ALL_NON_LOSSY' is set, but not `ALL_LOSSY',
                          then attempting a conversion that would result
                          in the loss of data (such as `INT' to
                          `TINYINT', or `CHAR(25)' to `VARCHAR(20)')
                          causes the slave to stop with an error.
`ALL_LOSSY,ALL_NON_LOSSY' When this mode is set, all supported type
                          conversions are permitted, whether or not they
                          are lossy conversions.
[_empty_]                 When `slave_type_conversions' is not set, no
                          attribute promotion or demotion is permitted;
                          this means that all columns in the source and
                          target tables must be of the same types.
                          
                          This mode is the default.

Changing the type conversion mode requires restarting the slave with
the new `slave_type_conversions' setting.

Supported conversions

Supported conversions between different but similar data types are
shown in the following list:

   * Between any of the integer types *Note `TINYINT': integer-types,
     *Note `SMALLINT': integer-types, *Note `MEDIUMINT': integer-types,
     *Note `INT': integer-types, and *Note `BIGINT': integer-types.

     This includes conversions between the signed and unsigned versions
     of these types.

     Lossy conversions are made by truncating the source value to the
     maximum (or minimum) permitted by the target column. For insuring
     non-lossy conversions when going from unsigned to signed types,
     the target column must be large enough to accommodate the range of
     values in the source column. For example, you can demote `TINYINT
     UNSIGNED' non-lossily to `SMALLINT', but not to `TINYINT'.

   * Between any of the decimal types *Note `DECIMAL':
     fixed-point-types, *Note `FLOAT': floating-point-types, *Note
     `DOUBLE': floating-point-types, and *Note `NUMERIC':
     fixed-point-types.

     `FLOAT' to `DOUBLE' is a non-lossy conversion; `DOUBLE' to `FLOAT'
     can only be handled lossily. A conversion from `DECIMAL(M,D)' to
     `DECIMAL(M',D')' where `M' => M' and `D' => D' is non-lossy; for
     any case where `M' < M', `D' < D', or both, only a lossy
     conversion can be made.

     For any of the decimal types, if a value to be stored cannot be
     fit in the target type, the value is rounded down according to the
     rounding rules defined for the server elsewhere in the
     documentation. See *Note precision-math-rounding::, for information
     about how this is done for decimal types.

   * Between any of the string types *Note `CHAR': char, *Note
     `VARCHAR': char, and *Note `TEXT': blob, including conversions
     between different widths.

     Conversion of a `CHAR', `VARCHAR', or `TEXT' to a `CHAR',
     `VARCHAR', or `TEXT' column the same size or larger is never
     lossy. Lossy conversion is handled by inserting only the first N
     characters of the string on the slave, where N is the width of the
     target column.

     *Important*:

     Replication between columns using different character sets is not
     supported.

   * Between any of the binary data types *Note `BINARY':
     binary-varbinary, *Note `VARBINARY': binary-varbinary, and *Note
     `BLOB': blob, including conversions between different widths.

     Conversion of a `BINARY', `VARBINARY', or `BLOB' to a `BINARY',
     `VARBINARY', or `BLOB' column the same size or larger is never
     lossy. Lossy conversion is handled by inserting only the first N
     bytes of the string on the slave, where N is the width of the
     target column.

   * Between any 2 *Note `BIT': bit-type. columns of any 2 sizes.

     When inserting a value from a `BIT(M)' column into a `BIT(M')'
     column, where `M' > M', the most significant bits of the `BIT(M')'
     columns are cleared (set to zero) and the M bits of the `BIT(M)'
     value are set as the least significant bits of the `BIT(M')'
     column.

     When inserting a value from a source `BIT(M)' column into a target
     `BIT(M')' column, where `M' < M', the maximum possible value for
     the `BIT(M')' column is assigned; in other words, an `all-set'
     value is assigned to the target column.

Conversions between types not in the previous list are not permitted.

Replication type conversions in MySQL 5.5.3 and earlier

Prior to MySQL 5.5.3, with row-based binary logging, you could not
replicate between different `INT' subtypes, such as from `TINYINT' to
`BIGINT', because changes to columns of these types were represented
differently from one another in the binary log when using row-based
logging. (However, you could replicate from `BLOB' to `TEXT' using
row-based replication because changes to `BLOB' and `TEXT' columns were
represented using the same format in the binary log.)

Supported conversions for attribute promotion when using row-based
replication prior to MySQL 5.5.3 are shown in the following table:

This table shows supported conversions for attribute promotion when
using row-based replication prior to MySQL 5.5.3.

From (Master)                        To (Slave)
*Note `BINARY': binary-varbinary.    *Note `CHAR': char.
*Note `BLOB': blob.                  *Note `TEXT': blob.
*Note `CHAR': char.                  *Note `BINARY': binary-varbinary.
*Note `DECIMAL': fixed-point-types.  *Note `NUMERIC': fixed-point-types.
*Note `NUMERIC': fixed-point-types.  *Note `DECIMAL': fixed-point-types.
*Note `TEXT': blob.                  *Note `BLOB': blob.
*Note `VARBINARY': binary-varbinary. *Note `VARCHAR': char.
*Note `VARCHAR': char.               *Note `VARBINARY': binary-varbinary.

*Note*:

In all cases, the size or width of the column on the slave must be
equal to or greater than that of the column on the master. For example,
you could replicate from a `CHAR(10)' column on the master to a column
that used `BINARY(10)' or `BINARY(25)' on the slave, but you could not
replicate from a `CHAR(10)' column on the master to `BINARY(5)' column
on the slave.

Any unique index (including primary keys) having a prefix must use a
prefix of the same length on both master and slave; in such cases,
differing prefix lengths are disallowed. It is possible to use a
nonunique index whose prefix length differs between master and slave,
but this can cause serious performance issues, particularly when the
prefix used on the master is longer. This is due to the fact that 2
unique prefixes of a given length may no longer be unique at a shorter
length; for example, the words _catalogue_ and _catamount_ have the
5-character prefixes _catal_ and _catam_, respectively, but share the
same 4-character prefix (_cata_). This can lead to queries that use
such indexes executing less efficiently on the slave, when a shorter
prefix is employed in the slave' definition of the same index than on
the master.

For *Note `DECIMAL': fixed-point-types. and *Note `NUMERIC':
fixed-point-types. columns, both the mantissa (_M_) and the number of
decimals (_D_) must be the same size or larger on the slave as compared
with the master. For example, replication from a `NUMERIC(5,4)' to a
`DECIMAL(6,4)' worked, but not from a `NUMERIC(5,4)' to a
`DECIMAL(5,3)'.

Prior to MySQL 5.5.3, MySQL replication did not support attribute
promotion of any of the following data types to or from any other data
type when using row-based replication:

   * *Note `INT': integer-types. (including `TINYINT', `SMALLINT',
     `MEDIUMINT', `BIGINT').

     Promotion between *Note `INT': integer-types.  subtypes--for
     example, from `SMALLINT' to `BIGINT'--was also not supported prior
     to MySQL 5.5.3.

   * *Note `SET': set. or *Note `ENUM': enum.

   * *Note `FLOAT': floating-point-types. or *Note `DOUBLE':
     floating-point-types.

   * All of the data types relating to dates, times, or both: *Note
     `DATE': datetime, *Note `TIME': time, *Note `DATETIME': datetime,
     *Note `TIMESTAMP': datetime, and *Note `YEAR': year.


File: manual.info,  Node: replication-features-directory,  Next: replication-features-invoked,  Prev: replication-features-differing-tables,  Up: replication-features

16.4.1.12 Replication and `DIRECTORY' Table Options
...................................................

If a `DATA DIRECTORY' or `INDEX DIRECTORY' table option is used in a
*Note `CREATE TABLE': create-table. statement on the master server, the
table option is also used on the slave. This can cause problems if no
corresponding directory exists in the slave host file system or if it
exists but is not accessible to the slave server. This can be
overridden by using the `NO_DIR_IN_CREATE' server SQL mode on the
slave, which causes the slave to ignore the `DATA DIRECTORY' and `INDEX
DIRECTORY' table options when replicating *Note `CREATE TABLE':
create-table. statements. The result is that `MyISAM' data and index
files are created in the table's database directory.

For more information, see *Note server-sql-mode::.


File: manual.info,  Node: replication-features-invoked,  Next: replication-features-floatvalues,  Prev: replication-features-directory,  Up: replication-features

16.4.1.13 Replication of Invoked Features
.........................................

Replication of invoked features such as user-defined functions (UDFs)
and stored programs (stored procedures and functions, triggers, and
events) provides the following characteristics:

   * The effects of the feature are always replicated.

   * The following statements are replicated using statement-based
     replication:

        * *Note `CREATE EVENT': create-event.

        * *Note `ALTER EVENT': alter-event.

        * *Note `DROP EVENT': drop-event.

        * *Note `CREATE PROCEDURE': create-procedure.

        * *Note `DROP PROCEDURE': drop-procedure.

        * *Note `CREATE FUNCTION': create-function.

        * *Note `DROP FUNCTION': drop-function.

        * *Note `CREATE TRIGGER': create-trigger.

        * *Note `DROP TRIGGER': drop-trigger.

     However, the _effects_ of features created, modified, or dropped
     using these statements are replicated using row-based replication.

     *Note*:

     Attempting to replicate invoked features using statement-based
     replication produces the warning `Statement is not safe to log in
     statement format'. For example, trying to replicate a UDF with
     statement-based replication generates this warning because it
     currently cannot be determined by the MySQL server whether the UDF
     is deterministic. If you are absolutely certain that the invoked
     feature's effects are deterministic, you can safely disregard such
     warnings.

   * In the case of *Note `CREATE EVENT': create-event.  and *Note
     `ALTER EVENT': alter-event.:

        * The status of the event is set to `SLAVESIDE_DISABLED' on the
          slave regardless of the state specified (this does not apply
          to *Note `DROP EVENT': drop-event.).

        * The master on which the event was created is identified on
          the slave by its server ID. The `ORIGINATOR' column in *Note
          `INFORMATION_SCHEMA.EVENTS': events-table.  and the
          `originator' column in `mysql.event' store this information.
          See *Note events-table::, and *Note show-events::, for more
          information.

   * The feature implementation resides on the slave in a renewable
     state so that if the master fails, the slave can be used as the
     master without loss of event processing.

To determine whether there are any scheduled events on a MySQL server
that were created on a different server (that was acting as a
replication master), query the *Note `INFORMATION_SCHEMA.EVENTS':
events-table. table in a manner similar to what is shown here:

     SELECT EVENT_SCHEMA, EVENT_NAME
         FROM INFORMATION_SCHEMA.EVENTS
         WHERE STATUS = 'SLAVESIDE_DISABLED';

Alternatively, you can use the *Note `SHOW EVENTS': show-events.
statement, like this:

     SHOW EVENTS
         WHERE STATUS = 'SLAVESIDE_DISABLED';

When promoting a replication slave having such events to a replication
master, you must enable each event using *Note `ALTER EVENT EVENT_NAME
ENABLED': alter-event, where EVENT_NAME is the name of the event.

If more than one master was involved in creating events on this slave,
and you wish to identify events that were created only on a given
master having the server ID MASTER_ID, modify the previous query on the
*Note `EVENTS': events-table. table to include the `ORIGINATOR' column,
as shown here:

     SELECT EVENT_SCHEMA, EVENT_NAME, ORIGINATOR
         FROM INFORMATION_SCHEMA.EVENTS
         WHERE STATUS = 'SLAVESIDE_DISABLED'
         AND   ORIGINATOR = 'MASTER_ID'

You can employ `ORIGINATOR' with the *Note `SHOW EVENTS': show-events.
statement in a similar fashion:

     SHOW EVENTS
         WHERE STATUS = 'SLAVESIDE_DISABLED'
         AND   ORIGINATOR = 'MASTER_ID'

Before enabling events that were replicated from the master, you should
disable the MySQL Event Scheduler on the slave (using a statement such
as `SET GLOBAL event_scheduler = OFF;'), run any necessary *Note `ALTER
EVENT': alter-event. statements, restart the server, then re-enable the
Event Scheduler on the slave afterward (using a statement such as `SET
GLOBAL event_scheduler = ON;')-

If you later demote the new master back to being a replication slave,
you must disable manually all events enabled by the *Note `ALTER
EVENT': alter-event. statements. You can do this by storing in a
separate table the event names from the *Note `SELECT': select.
statement shown previously, or using *Note `ALTER EVENT': alter-event.
statements to rename the events with a common prefix such as
`replicated_' to identify them.

If you rename the events, then when demoting this server back to being
a replication slave, you can identify the events by querying the *Note
`EVENTS': events-table. table, as shown here:

     SELECT CONCAT(EVENT_SCHEMA, '.', EVENT_NAME) AS 'Db.Event'
           FROM INFORMATION_SCHEMA.EVENTS
           WHERE INSTR(EVENT_NAME, 'replicated_') = 1;


File: manual.info,  Node: replication-features-floatvalues,  Next: replication-features-flush,  Prev: replication-features-invoked,  Up: replication-features

16.4.1.14 Replication and Floating-Point Values
...............................................

With statement-based replication, values are converted from decimal to
binary. Because conversions between decimal and binary representations
of them may be approximate, comparisons involving floating-point values
are inexact. This is true for operations that use floating-point values
explicitly, or that use values that are converted to floating-point
implicitly.  Comparisons of floating-point values might yield different
results on master and slave servers due to differences in computer
architecture, the compiler used to build MySQL, and so forth. See *Note
type-conversion::, and *Note problems-with-float::.


File: manual.info,  Node: replication-features-flush,  Next: replication-features-functions,  Prev: replication-features-floatvalues,  Up: replication-features

16.4.1.15 Replication and `FLUSH'
.................................

Some forms of the *Note `FLUSH': flush. statement are not logged
because they could cause problems if replicated to a slave: *Note
`FLUSH LOGS': flush, *Note `FLUSH MASTER': flush, *Note `FLUSH SLAVE':
flush, and *Note `FLUSH TABLES WITH READ LOCK': flush. For a syntax
example, see *Note flush::. The *Note `FLUSH TABLES': flush, *Note
`ANALYZE TABLE': analyze-table, *Note `OPTIMIZE TABLE': optimize-table,
and *Note `REPAIR TABLE': repair-table. statements are written to the
binary log and thus replicated to slaves. This is not normally a
problem because these statements do not modify table data.

However, this behavior can cause difficulties under certain
circumstances. If you replicate the privilege tables in the `mysql'
database and update those tables directly without using *Note `GRANT':
grant, you must issue a *Note `FLUSH PRIVILEGES': flush. on the slaves
to put the new privileges into effect. In addition, if you use *Note
`FLUSH TABLES': flush.  when renaming a `MyISAM' table that is part of
a `MERGE' table, you must issue *Note `FLUSH TABLES': flush.  manually
on the slaves. These statements are written to the binary log unless
you specify `NO_WRITE_TO_BINLOG' or its alias `LOCAL'.


File: manual.info,  Node: replication-features-functions,  Next: replication-features-limit,  Prev: replication-features-flush,  Up: replication-features

16.4.1.16 Replication and System Functions
..........................................

Certain functions do not replicate well under some conditions:

   * The `USER()', `CURRENT_USER()' (or `CURRENT_USER'), `UUID()',
     `VERSION()', and `LOAD_FILE()' functions are replicated without
     change and thus do not work reliably on the slave unless row-based
     replication is enabled. (See *Note replication-formats::.)

     `USER()' and `CURRENT_USER()' are automatically replicated using
     row-based replication when using `MIXED' mode, and generate a
     warning in `STATEMENT' mode. (Bug #28086) (See also *Note
     replication-features-current-user::.)

     Beginning with MySQL 5.5.1, `VERSION()' is also automatically
     replicated using row-based replication when using `MIXED' mode,
     and generates a warning in `STATEMENT' mode. (Bug #47995) Beginning
     with MySQL 5.5.2, this is also true with regard to the `RAND()'
     function. (Bug #49222)

   * For `NOW()', the binary log includes the timestamp. This means
     that the value _as returned by the call to this function on the
     master_ is replicated to the slave. This can lead to a possibly
     unexpected result when replicating between MySQL servers in
     different time zones. Suppose that the master is located in New
     York, the slave is located in Stockholm, and both servers are
     using local time. Suppose further that, on the master, you create
     a table `mytable', perform an *Note `INSERT': insert. statement on
     this table, and then select from the table, as shown here:

          mysql> CREATE TABLE mytable (mycol TEXT);
          Query OK, 0 rows affected (0.06 sec)

          mysql> INSERT INTO mytable VALUES ( NOW() );
          Query OK, 1 row affected (0.00 sec)

          mysql> SELECT * FROM mytable;
          +---------------------+
          | mycol               |
          +---------------------+
          | 2009-09-01 12:00:00 |
          +---------------------+
          1 row in set (0.00 sec)

     Local time in Stockholm is 6 hours later than in New York; so, if
     you issue `SELECT NOW()' on the slave at that exact same instant,
     the value `2009-09-01 18:00:00' is returned. For this reason, if
     you select from the slave's copy of `mytable' after the *Note
     `CREATE TABLE': create-table. and *Note `INSERT': insert.
     statements just shown have been replicated, you might expect
     `mycol' to contain the value `2009-09-01 18:00:00'. However, this
     is not the case; when you select from the slave's copy of
     `mytable', you obtain exactly the same result as on the master:

          mysql> SELECT * FROM mytable;
          +---------------------+
          | mycol               |
          +---------------------+
          | 2009-09-01 12:00:00 |
          +---------------------+
          1 row in set (0.00 sec)

     Unlike `NOW()', the `SYSDATE()' function is not replication-safe
     because it is not affected by `SET TIMESTAMP' statements in the
     binary log and is nondeterministic if statement-based logging is
     used. This is not a problem if row-based logging is used.

     An alternative is to use the `--sysdate-is-now' option to cause
     `SYSDATE()' to be an alias for `NOW()'. This must be done on the
     master and the slave to work correctly. In such cases, a warning
     is still issued by this function, but can safely be ignored as
     long as `--sysdate-is-now' is used on both the master and the
     slave.

     Beginning with MySQL 5.5.1, `SYSDATE()' is automatically
     replicated using row-based replication when using `MIXED' mode,
     and generates a warning in `STATEMENT' mode. (Bug #47995)

     See also *Note replication-features-timezone::.

   * _The following restriction applies to statement-based replication
     only, not to row-based replication._ The `GET_LOCK()',
     `RELEASE_LOCK()', `IS_FREE_LOCK()', and `IS_USED_LOCK()' functions
     that handle user-level locks are replicated without the slave
     knowing the concurrency context on the master. Therefore, these
     functions should not be used to insert into a master table because
     the content on the slave would differ. For example, do not issue a
     statement such as `INSERT INTO mytable VALUES(GET_LOCK(...))'.

     Beginning with MySQL 5.5.1, these functions are automatically
     replicated using row-based replication when using `MIXED' mode,
     and generate a warning in `STATEMENT' mode. (Bug #47995)

As a workaround for the preceding limitations when statement-based
replication is in effect, you can use the strategy of saving the
problematic function result in a user variable and referring to the
variable in a later statement. For example, the following single-row
*Note `INSERT': insert. is problematic due to the reference to the
`UUID()' function:

     INSERT INTO t VALUES(UUID());

To work around the problem, do this instead:

     SET @my_uuid = UUID();
     INSERT INTO t VALUES(@my_uuid);

That sequence of statements replicates because the value of `@my_uuid'
is stored in the binary log as a user-variable event prior to the *Note
`INSERT': insert. statement and is available for use in the *Note
`INSERT': insert.

The same idea applies to multiple-row inserts, but is more cumbersome
to use. For a two-row insert, you can do this:

     SET @my_uuid1 = UUID(); @my_uuid2 = UUID();
     INSERT INTO t VALUES(@my_uuid1),(@my_uuid2);

However, if the number of rows is large or unknown, the workaround is
difficult or impracticable. For example, you cannot convert the
following statement to one in which a given individual user variable is
associated with each row:

     INSERT INTO t2 SELECT UUID(), * FROM t1;

Within a stored function, `RAND()' replicates correctly as long as it
is invoked only once during the execution of the function. (You can
consider the function execution timestamp and random number seed as
implicit inputs that are identical on the master and slave.)

The `FOUND_ROWS()' and `ROW_COUNT()' functions are not replicated
reliably using statement-based replication. A workaround is to store
the result of the function call in a user variable, and then use that
in the *Note `INSERT': insert. statement. For example, if you wish to
store the result in a table named `mytable', you might normally do so
like this:

     SELECT SQL_CALC_FOUND_ROWS FROM mytable LIMIT 1;
     INSERT INTO mytable VALUES( FOUND_ROWS() );

However, if you are replicating `mytable', you should use *Note `SELECT
... INTO': select-into, and then store the variable in the table, like
this:

     SELECT SQL_CALC_FOUND_ROWS INTO @found_rows FROM mytable LIMIT 1;
     INSERT INTO mytable VALUES(@found_rows);

In this way, the user variable is replicated as part of the context,
and applied on the slave correctly.

These functions are automatically replicated using row-based
replication when using `MIXED' mode, and generate a warning in
`STATEMENT' mode. (Bug #12092, Bug #30244)


File: manual.info,  Node: replication-features-limit,  Next: replication-features-load-data,  Prev: replication-features-functions,  Up: replication-features

16.4.1.17 Replication and `LIMIT'
.................................

Statement-based replication of `LIMIT' clauses in *Note `DELETE':
delete, *Note `UPDATE': update, and *Note `INSERT ... SELECT':
insert-select. statements is unsafe since the order of the rows
affected is not defined. (Such statements can be replicated correctly
with statement-based replication only if they also contain an `ORDER
BY' clause.) When such a statement is encountered:

   * When using `STATEMENT' mode, a warning that the statement is not
     safe for statement-based replication is now issued.

     Currently, when using `STATEMENT' mode, warnings are issued for
     DML statements containing `LIMIT' even when they also have an
     `ORDER BY' clause (and so are made deterministic). This is a known
     issue. (Bug #42851)

   * When using `MIXED' mode, the statement is now automatically
     replicated using row-based mode.


File: manual.info,  Node: replication-features-load-data,  Next: replication-features-logging,  Prev: replication-features-limit,  Up: replication-features

16.4.1.18 Replication and `LOAD DATA INFILE'
............................................

The *Note `LOAD DATA INFILE': load-data. statement was not always
replicated correctly to a slave running MySQL 5.5.0 or earlier from a
master running MySQL 4.0 or earlier. When using statement-based
replication, the *Note `LOAD DATA INFILE': load-data. statement
`CONCURRENT' option was not replicated. This issue was fixed in MySQL
5.5.0. This issue does not have any impact on `CONCURRENT' option
handling when using row-based replication in MySQL 5.1 or later. (Bug
#34628)

In MySQL 5.5.6 and later, *Note `LOAD DATA INFILE': load-data. is
considered unsafe (see *Note replication-rbr-safe-unsafe::). It causes a
warning when using statement-based logging format, and is logged using
row-based format when using mixed-format logging.


File: manual.info,  Node: replication-features-logging,  Next: replication-features-repair-table,  Prev: replication-features-load-data,  Up: replication-features

16.4.1.19 Replication and the Slow Query Log
............................................

In older versions of MySQL, replication slaves did not write replicated
queries to the slow query log, even if the same queries were written to
the slow query log on the master. This is no longer an issue in MySQL
5.5. (Bug #23300)


File: manual.info,  Node: replication-features-repair-table,  Next: replication-features-shutdowns,  Prev: replication-features-logging,  Up: replication-features

16.4.1.20 Replication and `REPAIR TABLE'
........................................

When used on a corrupted or otherwise damaged table, it is possible for
the *Note `REPAIR TABLE': repair-table.  statement to delete rows that
cannot be recovered. However, any such modifications of table data
performed by this statement are not replicated, which can cause master
and slave to lose synchronization. For this reason, in the event that a
table on the master becomes damaged and you use *Note `REPAIR TABLE':
repair-table. to repair it, you should first stop replication (if it is
still running) before using *Note `REPAIR TABLE': repair-table, then
afterward compare the master's and slave's copies of the table and be
prepared to correct any discrepancies manually, before restarting
replication.


File: manual.info,  Node: replication-features-shutdowns,  Next: replication-features-max-allowed-packet,  Prev: replication-features-repair-table,  Up: replication-features

16.4.1.21 Replication and Master or Slave Shutdowns
...................................................

It is safe to shut down a master server and restart it later.  When a
slave loses its connection to the master, the slave tries to reconnect
immediately and retries periodically if that fails.  The default is to
retry every 60 seconds. This may be changed with the *Note `CHANGE
MASTER TO': change-master-to.  statement. A slave also is able to deal
with network connectivity outages. However, the slave notices the
network outage only after receiving no data from the master for
`slave_net_timeout' seconds. If your outages are short, you may want to
decrease `slave_net_timeout'. See *Note server-system-variables::.

An unclean shutdown (for example, a crash) on the master side can
result in the master binary log having a final position less than the
most recent position read by the slave, due to the master binary log
file not being flushed. This can cause the slave not to be able to
replicate when the master comes back up.  Setting `sync_binlog=1' in the
master `my.cnf' file helps to minimize this problem because it causes
the master to flush its binary log more frequently.

Shutting down a slave cleanly is safe because it keeps track of where
it left off. However, be careful that the slave does not have temporary
tables open; see *Note replication-features-temptables::. Unclean
shutdowns might produce problems, especially if the disk cache was not
flushed to disk before the problem occurred:

   * For transactions, the slave commits and then updates
     `relay-log.info'. If a crash occurs between these two operations,
     relay log processing will have proceeded further than the
     information file indicates and the slave will re-execute the
     events from the last transaction in the relay log after it has
     been restarted.

   * A similar problem can occur if the slave updates `relay-log.info'
     but the server host crashes before the write has been flushed to
     disk. To minimize the chance of this occurring, set
     `sync_relay_log_info=1' in the slave `my.cnf' file. The default
     value of `sync_relay_log_info' is 0, which does not cause writes
     to be forced to disk; the server relies on the operating system to
     flush the file from time to time.

The fault tolerance of your system for these types of problems is
greatly increased if you have a good uninterruptible power supply.


File: manual.info,  Node: replication-features-max-allowed-packet,  Next: replication-features-memory,  Prev: replication-features-shutdowns,  Up: replication-features

16.4.1.22 Replication and `max_allowed_packet'
..............................................

`max_allowed_packet' sets an upper limit on the size of any single
message between the MySQL server and clients, including replication
slaves. If you are replicating large column values (such as might be
found in *Note `TEXT': blob. or *Note `BLOB': blob. columns) and
`max_allowed_packet' is too small on the master, the master fails with
an error, and the slave shuts down the I/O thread. If
`max_allowed_packet' is too small on the slave, this also causes the
slave to stop the I/O thread.

Row-based replication currently sends all columns and column values for
updated rows from the master to the slave, including values of columns
that were not actually changed by the update.  This means that, when
you are replicating large column values using row-based replication,
you must take care to set `max_allowed_packet' large enough to
accommodate the largest row in any table to be replicated, even if you
are replicating updates only, or you are inserting only relatively
small values.


File: manual.info,  Node: replication-features-memory,  Next: replication-features-temptables,  Prev: replication-features-max-allowed-packet,  Up: replication-features

16.4.1.23 Replication and `MEMORY' Tables
.........................................

When a master server shuts down and restarts, its *Note `MEMORY':
memory-storage-engine. tables become empty. To replicate this effect to
slaves, the first time that the master uses a given *Note `MEMORY':
memory-storage-engine. table after startup, it logs an event that
notifies slaves that the table must to be emptied by writing a *Note
`DELETE': delete. statement for that table to the binary log.

When a slave server shuts down and restarts, its *Note `MEMORY':
memory-storage-engine. tables become empty. This causes the slave to be
out of synchrony with the master and may lead to other failures or
cause the slave to stop:

   * Row-format updates and deletes received from the master may fail
     with `Can't find record in 'MEMORY_TABLE''.

   * Statements such as *Note `INSERT INTO ... SELECT FROM
     MEMORY_TABLE': insert-select. may insert a different set of rows
     on the master and slave.

The safe way to restart a slave that is replicating *Note `MEMORY':
memory-storage-engine. tables is to first drop or delete all rows from
the *Note `MEMORY': memory-storage-engine.  tables on the master and
wait until those changes have replicated to the slave. Then it is safe
to restart the slave.

An alternative restart method may apply in some cases. When
`binlog_format=ROW', you can prevent the slave from stopping if you set
`slave_exec_mode=IDEMPOTENT' before you start the slave again. This
allows the slave to continue to replicate, but its *Note `MEMORY':
memory-storage-engine. tables will still be different from those on the
master. This can be okay if the application logic is such that the
contents of *Note `MEMORY': memory-storage-engine. tables can be safely
lost (for example, if the *Note `MEMORY': memory-storage-engine. tables
are used for caching).  `slave_exec_mode=IDEMPOTENT' applies globally
to all tables, so it may hide other replication errors in non-*Note
`MEMORY': memory-storage-engine. tables.

The size of *Note `MEMORY': memory-storage-engine. tables is limited by
the value of the `max_heap_table_size' system variable, which is not
replicated (see *Note replication-features-variables::). A change in
`max_heap_table_size' takes effect for `MEMORY' tables that are created
or updated using *Note `ALTER TABLE ... ENGINE = MEMORY': alter-table.
or *Note `TRUNCATE TABLE': truncate-table. following the change, or for
all *Note `MEMORY': memory-storage-engine. tables following a server
restart. If you increase the value of this variable on the master
without doing so on the slave, it becomes possible for a table on the
master to grow larger than its counterpart on the slave, leading to
inserts that succeed on the master but fail on the slave with `Table is
full' errors. This is a known issue (Bug #48666). In such cases, you
must set the global value of `max_heap_table_size' on the slave as well
as on the master, then restart replication. It is also recommended that
you restart both the master and slave MySQL servers, to insure that the
new value takes complete (global) effect on each of them.

See *Note memory-storage-engine::, for more information about *Note
`MEMORY': memory-storage-engine. tables.


File: manual.info,  Node: replication-features-temptables,  Next: replication-features-mysqldb,  Prev: replication-features-memory,  Up: replication-features

16.4.1.24 Replication and Temporary Tables
..........................................

The discussion in the following paragraphs does not apply when
`binlog_format=ROW' because, in that case, temporary tables are not
replicated; this means that there are never any temporary tables on the
slave to be lost in the event of an unplanned shutdown by the slave.
The remainder of this section applies only when using statement-based or
mixed-format replication. Loss of replicated temporary tables on the
slave can be an issue, whenever `binlog_format' is `STATEMENT' or
`MIXED', for statements involving temporary tables that can be logged
safely using statement-based format. For more information about
row-based replication and temporary tables, see *Note
replication-rbr-usage-temptables::.

Safe slave shutdown when using temporary tables

Temporary tables are replicated except in the case where you stop the
slave server (not just the slave threads) and you have replicated
temporary tables that are open for use in updates that have not yet
been executed on the slave. If you stop the slave server, the temporary
tables needed by those updates are no longer available when the slave
is restarted.  To avoid this problem, do not shut down the slave while
it has temporary tables open. Instead, use the following procedure:

  1. Issue a `STOP SLAVE SQL_THREAD' statement.

  2. Use *Note `SHOW STATUS': show-status. to check the value of the
     `Slave_open_temp_tables' variable.

  3. If the value is not 0, restart the slave SQL thread with `START
     SLAVE SQL_THREAD' and repeat the procedure later.

  4. When the value is 0, issue a *Note `mysqladmin shutdown':
     mysqladmin. command to stop the slave.

Temporary tables and replication options

By default, all temporary tables are replicated; this happens whether
or not there are any matching `--replicate-do-db',
`--replicate-do-table', or `--replicate-wild-do-table' options in
effect. However, the `--replicate-ignore-table' and
`--replicate-wild-ignore-table' options are honored for temporary
tables.

A recommended practice when using statement-based or mixed-format
replication is to designate a prefix for exclusive use in naming
temporary tables that you do not want replicated, then employ a
`--replicate-wild-ignore-table' option to match that prefix. For
example, you might give all such tables names beginning with `norep'
(such as `norepmytable', `norepyourtable', and so on), then use
`--replicate-wild-ignore-table=norep%' to prevent them from being
replicated.


File: manual.info,  Node: replication-features-mysqldb,  Next: replication-features-optimizer,  Prev: replication-features-temptables,  Up: replication-features

16.4.1.25 Replication of the `mysql' System Database
....................................................

Data modification statements made to tables in the `mysql' database are
replicated according to the value of `binlog_format'; if this value is
`MIXED', these statements are replicated using row-based format.
However, statements that would normally update this information
indirectly--such *Note `GRANT': grant, *Note `REVOKE': revoke, and
statements manipulating triggers, stored routines, and views--are
replicated to slaves using statement-based replication.


File: manual.info,  Node: replication-features-optimizer,  Next: replication-features-reserved-words,  Prev: replication-features-mysqldb,  Up: replication-features

16.4.1.26 Replication and the Query Optimizer
.............................................

It is possible for the data on the master and slave to become different
if a statement is written in such a way that the data modification is
nondeterministic; that is, left up the query optimizer. (In general,
this is not a good practice, even outside of replication.) Examples of
nondeterministic statements include *Note `DELETE': delete. or *Note
`UPDATE': update. statements that use `LIMIT' with no `ORDER BY'
clause; see *Note replication-features-limit::, for a detailed
discussion of these.


File: manual.info,  Node: replication-features-reserved-words,  Next: replication-features-set-password,  Prev: replication-features-optimizer,  Up: replication-features

16.4.1.27 Replication and Reserved Words
........................................

You can encounter problems when you attempt to replicate from an older
master to a newer slave and you make use of identifiers on the master
that are reserved words in the newer MySQL version running on the
slave. An example of this is using a table column named `current_user'
on a 4.0 master that is replicating to a 4.1 or higher slave because
`CURRENT_USER' is a reserved word beginning in MySQL 4.1. Replication
can fail in such cases with Error 1064 `You have an error in your SQL
syntax...', _even if a database or table named using the reserved word
or a table having a column named using the reserved word is excluded
from replication_. This is due to the fact that each SQL event must be
parsed by the slave prior to execution, so that the slave knows which
database object or objects would be affected; only after the event is
parsed can the slave apply any filtering rules defined by
`--replicate-do-db', `--replicate-do-table', `--replicate-ignore-db',
and `--replicate-ignore-table'.

To work around the problem of database, table, or column names on the
master which would be regarded as reserved words by the slave, do one
of the following:

   * Use one or more *Note `ALTER TABLE': alter-table.  statements on
     the master to change the names of any database objects where these
     names would be considered reserved words on the slave, and change
     any SQL statements that use the old names to use the new names
     instead.

   * In any SQL statements using these database object names, write the
     names as quoted identifiers using backtick characters (``').

For listings of reserved words by MySQL version, see Reserved Words
(http://dev.mysql.com/doc/mysqld-version-reference/en/mysqld-version-reference-optvar.html),
in the `MySQL Server Version Reference'. For identifier quoting rules,
see *Note identifiers::.


File: manual.info,  Node: replication-features-set-password,  Next: replication-features-slaveerrors,  Prev: replication-features-reserved-words,  Up: replication-features

16.4.1.28 `SET PASSWORD' and Row-Based Replication
..................................................

Row-based replication of *Note `SET PASSWORD': set-password. statements
from a MySQL 5.1 master to a MySQL 5.5 slave did not work correctly
prior to MySQL 5.1.53 on the master and MySQL 5.5.7 on the slave (see
Bug #57098, Bug #57357).


File: manual.info,  Node: replication-features-slaveerrors,  Next: replication-features-sql-mode,  Prev: replication-features-set-password,  Up: replication-features

16.4.1.29 Slave Errors During Replication
.........................................

If a statement produces the same error (identical error code) on both
the master and the slave, the error is logged, but replication
continues.

If a statement produces different errors on the master and the slave,
the slave SQL thread terminates, and the slave writes a message to its
error log and waits for the database administrator to decide what to do
about the error. This includes the case that a statement produces an
error on the master or the slave, but not both. To address the issue,
connect to the slave manually and determine the cause of the problem.
*Note `SHOW SLAVE STATUS': show-slave-status. is useful for this. Then
fix the problem and run *Note `START SLAVE': start-slave. For example,
you might need to create a nonexistent table before you can start the
slave again.

If this error code validation behavior is not desirable, some or all
errors can be masked out (ignored) with the `--slave-skip-errors'
option.

For nontransactional storage engines such as `MyISAM', it is possible
to have a statement that only partially updates a table and returns an
error code.  This can happen, for example, on a multiple-row insert
that has one row violating a key constraint, or if a long update
statement is killed after updating some of the rows. If that happens on
the master, the slave expects execution of the statement to result in
the same error code. If it does not, the slave SQL thread stops as
described previously.

If you are replicating between tables that use different storage
engines on the master and slave, keep in mind that the same statement
might produce a different error when run against one version of the
table, but not the other, or might cause an error for one version of
the table, but not the other. For example, since `MyISAM' ignores
foreign key constraints, an *Note `INSERT': insert. or *Note `UPDATE':
update. statement accessing an `InnoDB' table on the master might cause
a foreign key violation but the same statement performed on a `MyISAM'
version of the same table on the slave would produce no such error,
causing replication to stop.


File: manual.info,  Node: replication-features-sql-mode,  Next: replication-features-timeout,  Prev: replication-features-slaveerrors,  Up: replication-features

16.4.1.30 Replication and Server SQL Mode
.........................................

Using different server SQL mode settings on the master and the slave
may cause the same *Note `INSERT': insert.  statements to be handled
differently on the master and the slave, leading the master and slave
to diverge. For best results, you should always use the same server SQL
mode on the master and on the slave. This advice applies whether you are
using statement-based or row-based replication.

If you are replicating partitioned tables, using different SQL modes on
the master and the slave is likely to cause issues. At a minimum, this
is likely to cause the distribution of data among partitions to be
different in the master's and slave's copies of a given table. It may
also cause inserts into partitioned tables that succeed on the master
to fail on the slave.

For more information, see *Note server-sql-mode::.


File: manual.info,  Node: replication-features-timeout,  Next: replication-features-timestamp,  Prev: replication-features-sql-mode,  Up: replication-features

16.4.1.31 Replication Retries and Timeouts
..........................................

The global system variable `slave_transaction_retries' affects
replication as follows: If the slave SQL thread fails to execute a
transaction because of an `InnoDB' deadlock or because it exceeded the
`InnoDB' `innodb_lock_wait_timeout' value, or the *Note `NDBCLUSTER':
mysql-cluster.  `TransactionDeadlockDetectionTimeout' or
`TransactionInactiveTimeout' value, the slave automatically retries the
transaction `slave_transaction_retries' times before stopping with an
error. The default value is 10. The total retry count can be seen in
the output of *Note `SHOW STATUS': show-status.; see *Note
server-status-variables::.


File: manual.info,  Node: replication-features-timestamp,  Next: replication-features-timezone,  Prev: replication-features-timeout,  Up: replication-features

16.4.1.32 Replication and `TIMESTAMP'
.....................................

Older versions of MySQL (prior to 4.1) differed significantly in
several ways in their handling of the *Note `TIMESTAMP': datetime. data
type from what is supported in MySQL versions 5.5 and newer; these
include syntax extensions which are deprecated in MySQL 5.1, and that
no longer supported in MySQL 5.5. This this can cause problems
(including replication failures) when replicating between MySQL Server
versions, if you are using columns that are defined using the old *Note
`TIMESTAMP(N)': datetime. syntax. See *Note
upgrading-from-previous-series::, for more information about the
differences, how they can impact MySQL replication, and what you can do
if you encounter such problems.


File: manual.info,  Node: replication-features-timezone,  Next: replication-features-transactions,  Prev: replication-features-timestamp,  Up: replication-features

16.4.1.33 Replication and Time Zones
....................................

The same system time zone should be set for both master and slave.
Otherwise, statements depending on the local time on the master are not
replicated properly, such as statements that use the `NOW()' or
`FROM_UNIXTIME()' functions. You can set the time zone in which MySQL
server runs by using the `--timezone=TIMEZONE_NAME' option of the
`mysqld_safe' script or by setting the `TZ' environment variable. See
also *Note replication-features-functions::.

If the master is MySQL 4.1 or earlier, both master and slave should
also use the same default connection time zone. That is, the
`--default-time-zone' parameter should have the same value for both
master and slave.

`CONVERT_TZ(...,...,@@session.time_zone)' is properly replicated only
if both master and slave are running MySQL 5.0.4 or newer.


File: manual.info,  Node: replication-features-transactions,  Next: replication-features-triggers,  Prev: replication-features-timezone,  Up: replication-features

16.4.1.34 Replication and Transactions
......................................

Mixing transactional and nontransactional statements within the same
transaction

In general, you should avoid transactions that update both
transactional and nontransactional tables in a replication environment.
You should also avoid using any statement that accesses both
transactional (or temporary) and nontransactional tables and writes to
any of them.

As of MySQL 5.5.2, the server uses these rules for binary logging:

   * If the initial statements in a transaction are nontransactional,
     they are written to the binary log immediately. The remaining
     statements in the transaction are cached and not written to the
     binary log until the transaction is committed. (If the transaction
     is rolled back, the cached statements are written to the binary log
     only if they make nontransactional changes that cannot be rolled
     back. Otherwise, they are discarded.)

   * For statement-based logging, logging of nontransactional
     statements is affected by the
     `binlog_direct_non_transactional_updates' system variable. When
     this variable is `OFF' (the default), logging is as just
     described. When this variable is `ON', logging occurs immediately
     for nontransactional statements occurring anywhere in the
     transaction (not just initial nontransactional statements). Other
     statements are kept in the transaction cache and logged when the
     transaction commits.  `binlog_direct_non_transactional_updates'
     has no effect for row-format or mixed-format binary logging.

Transactional, nontransactional, and mixed statements

To apply those rules, the server considers a statement nontransactional
if it changes only nontransactional tables, and transactional if it
changes only transactional tables.  Prior to MySQL 5.5.6, a statement
that changed both nontransactional and transactional tables was
considered `mixed'. Beginning with MySQL 5.5.6, a statement that
references both nontransactional and transactional tables and updates
_any_ of the tables involved, is considered a mixed statement. Mixed
statements, like transactional statements, are cached and logged when
the transaction commits.

Beginning with MySQL 5.5.6, a mixed statement that updates a
transactional table is considered unsafe if the statement also performs
either of the following actions:

   * Updates or reads a transactional table

   * Reads a nontransactional table and the transaction isolation level
     is less than REPEATABLE_READ

Also beginning with MySQL 5.5.6, any mixed statement following the
update of a transactional table within a transaction is considered
unsafe if it performs either of the following actions:

   * Updates any table and reads from any temporary table

   * Updates a nontransactional table and
     binlog_direct_non_trans_update is OFF

For more information, see *Note replication-rbr-safe-unsafe::.

*Note*:

A mixed statement is unrelated to mixed binary logging format.

Before MySQL 5.5.2, the rules for binary logging are similar to those
just described, except that there is no
`binlog_direct_non_transactional_updates' system variable to affect
logging of transactional statements.  Thus, the server immediately logs
only the initial nontransactional statements in a transaction and
caches the rest until commit time.

In situations where transactions mix updates to transactional and
nontransactional tables, the order of statements in the binary log is
correct, and all needed statements are written to the binary log even
in case of a *Note `ROLLBACK': commit.  However, when a second
connection updates the nontransactional table before the first
connection transaction is complete, statements can be logged out of
order because the second connection update is written immediately after
it is performed, regardless of the state of the transaction being
performed by the first connection.

Using different storage engines on master and slave

It is possible to replicate transactional tables on the master using
nontransactional tables on the slave. For example, you can replicate an
`InnoDB' master table as a `MyISAM' slave table. However, if you do
this, there are problems if the slave is stopped in the middle of a
*Note `BEGIN': commit ... *Note `COMMIT': commit. block because the
slave restarts at the beginning of the *Note `BEGIN': commit. block.

Beginning with MySQL 5.5.0, it is also safe to replicate transactions
from *Note `MyISAM': myisam-storage-engine. tables on the master to
transactional tables--such as tables that use the *Note `InnoDB':
innodb-storage-engine. storage engine--on the slave. In such cases
(beginning with MySQL 5.5.0), an `AUTOCOMMIT=1' statement issued on the
master is replicated, thus enforcing `AUTOCOMMIT' mode on the slave.

When the storage engine type of the slave is nontransactional,
transactions on the master that mix updates of transactional and
nontransactional tables should be avoided because they can cause
inconsistency of the data between the master transactional table and
the slave nontransactional table. That is, such transactions can lead
to master storage engine-specific behavior with the possible effect of
replication going out of synchrony. MySQL does not issue a warning
about this currently, so extra care should be taken when replicating
transactional tables from the master to nontransactional tables on the
slaves.

Changing the binary logging format within transactions

Beginning with MySQL 5.5.3, the `binlog_format' system variable is
read-only as long as a transaction is in progress. (Bug #47863)

Every transaction (including `autocommit' transactions) is recorded in
the binary log as though it starts with a *Note `BEGIN': commit.
statement, and ends with either a *Note `COMMIT': commit. or a *Note
`ROLLBACK': commit.  statement. In MySQL 5.5, this true is even for
statements affecting tables that use a nontransactional storage engine
(such as *Note `MyISAM': myisam-storage-engine.).


File: manual.info,  Node: replication-features-triggers,  Next: replication-features-truncate,  Prev: replication-features-transactions,  Up: replication-features

16.4.1.35 Replication and Triggers
..................................

With statement-based replication, triggers executed on the master also
execute on the slave. With row-based replication, triggers executed on
the master do not execute on the slave.  Instead, the row changes on
the master resulting from trigger execution are replicated and applied
on the slave.

This behavior is by design. If under row-based replication the slave
applied the triggers as well as the row changes caused by them, the
changes would in effect be applied twice on the slave, leading to
different data on the master and the slave.

If you want triggers to execute on both the master and the
slave--perhaps because you have different triggers on the master and
slave--you must use statement-based replication.  However, to enable
slave-side triggers, it is not necessary to use statement-based
replication exclusively. It is sufficient to switch to statement-based
replication only for those statements where you want this effect, and
to use row-based replication the rest of the time.

A statement invoking a trigger (or function) that causes an update to
an `AUTO_INCREMENT' column is not replicated correctly using
statement-based replication. MySQL 5.5 marks such statements as unsafe.
(Bug #45677)


File: manual.info,  Node: replication-features-truncate,  Next: replication-features-variables,  Prev: replication-features-triggers,  Up: replication-features

16.4.1.36 Replication and `TRUNCATE TABLE'
..........................................

*Note `TRUNCATE TABLE': truncate-table. is normally regarded as a DML
statement, and so would be expected to be logged and replicated using
row-based format when the binary logging mode is `ROW' or `MIXED'.
However this caused issues when logging or replicating, in `STATEMENT'
or `MIXED' mode, tables that used transactional storage engines such as
*Note `InnoDB': innodb-storage-engine. when the transaction isolation
level was `READ COMMITTED' or `READ UNCOMMITTED', which precludes
statement-based logging.

*Note `TRUNCATE TABLE': truncate-table. is treated for purposes of
logging and replication as DDL rather than DML so that it can be logged
and replicated as a statement. However, the effects of the statement as
applicable to *Note `InnoDB': innodb-storage-engine. and other
transactional tables on replication slaves still follow the rules
described in *Note truncate-table:: governing such tables. (Bug #36763)


File: manual.info,  Node: replication-features-variables,  Next: replication-features-views,  Prev: replication-features-truncate,  Up: replication-features

16.4.1.37 Replication and Variables
...................................

System variables are not replicated correctly when using `STATEMENT'
mode, except for the following variables when they are used with
session scope:

   * `auto_increment_increment'

   * `auto_increment_offset'

   * `character_set_client'

   * `character_set_connection'

   * `character_set_database'

   * `character_set_server'

   * `collation_connection'

   * `collation_database'

   * `collation_server'

   * `foreign_key_checks'

   * `identity'

   * `last_insert_id'

   * `lc_time_names'

   * `pseudo_thread_id'

   * `sql_auto_is_null'

   * `time_zone'

   * `timestamp'

   * `unique_checks'

When `MIXED' mode is used, the variables in the preceding list, when
used with session scope, cause a switch from statement-based to
row-based logging. See *Note binary-log-mixed::.

`sql_mode' is also replicated except for the `NO_DIR_IN_CREATE' mode;
the slave always preserves its own value for `NO_DIR_IN_CREATE',
regardless of changes to it on the master. This is true for all
replication formats.

However, when *Note `mysqlbinlog': mysqlbinlog. parses a `SET
@@sql_mode = MODE' statement, the full MODE value, including
`NO_DIR_IN_CREATE', is passed to the receiving server. For this reason,
replication of such a statement may not be safe when `STATEMENT' mode
is in use.

The `default_storage_engine' and `storage_engine' system variables are
not replicated, regardless of the logging mode; this is intended to
facilitate replication between different storage engines.

The `read_only' system variable is not replicated. In addition, the
enabling this variable has different effects with regard to temporary
tables, table locking, and the *Note `SET PASSWORD': set-password.
statement in different MySQL versions.

The `max_heap_table_size' system variable is not replicated. Increasing
the value of this variable on the master without doing so on the slave
can lead eventually to `Table is full' errors on the slave when trying
to execute *Note `INSERT': insert. statements on a *Note `MEMORY':
memory-storage-engine. table on the master that is thus permitted to
grow larger than its counterpart on the slave.  For more information,
see *Note replication-features-memory::.

In statement-based replication, session variables are not replicated
properly when used in statements that update tables.  For example, the
following sequence of statements will not insert the same data on the
master and the slave:

     SET max_join_size=1000;
     INSERT INTO mytable VALUES(@@max_join_size);

This does not apply to the common sequence:

     SET time_zone=...;
     INSERT INTO mytable VALUES(CONVERT_TZ(..., ..., @@time_zone));

Replication of session variables is not a problem when row-based
replication is being used, in which case, session variables are always
replicated safely. See *Note replication-formats::.

In MySQL 5.5, the following session variables are written to the binary
log and honored by the replication slave when parsing the binary log,
regardless of the logging format:

   * `sql_mode'

   * `foreign_key_checks'

   * `unique_checks'

   * `character_set_client'

   * `collation_connection'

   * `collation_database'

   * `collation_server'

   * `sql_auto_is_null'

*Important*:

Even though session variables relating to character sets and collations
are written to the binary log, replication between different character
sets is not supported.

It is strongly recommended that you always use the same setting for the
`lower_case_table_names' system variable on both master and slave. In
particular, when a case-sensitive file system is used, setting this
variable to 1 on the slave, but to a different value on the master, can
cause two types of problems: Names of databases are not converted to
lowercase; in addition, when using row-based replication names of
tables are also not converted. Either of these problems can cause
replication to fail. This is a known issue, which is fixed in MySQL 5.6.


File: manual.info,  Node: replication-features-views,  Prev: replication-features-variables,  Up: replication-features

16.4.1.38 Replication and Views
...............................

Views are always replicated to slaves. Views are filtered by their own
name, not by the tables they refer to. This means that a view can be
replicated to the slave even if the view contains a table that would
normally be filtered out by `replication-ignore-table' rules. Care
should therefore be taken to ensure that views do not replicate table
data that would normally be filtered for security reasons.

Replication from a table to a samed-named view is supported using
statement-based logging, but not when using row-based logging. In MySQL
5.5.31 and later, trying to do so when row-based logging is in effect
causes an error. (Bug #11752707, Bug #43975)


File: manual.info,  Node: replication-compatibility,  Next: replication-upgrade,  Prev: replication-features,  Up: replication-notes

16.4.2 Replication Compatibility Between MySQL Versions
-------------------------------------------------------

MySQL supports replication from one major version to the next higher
major version. For example, you can replicate from a master running
MySQL 4.1 to a slave running MySQL 5.0, from a master running MySQL 5.0
to a slave running MySQL 5.1, and so on.

However, one may encounter difficulties when replicating from an older
master to a newer slave if the master uses statements or relies on
behavior no longer supported in the version of MySQL used on the slave.
For example, in MySQL 5.5, *Note `CREATE TABLE ... SELECT':
create-table-select. statements are permitted to change tables other
than the one being created, but are no longer allowed to do so in MySQL
5.6 (see *Note replication-features-create-select::).

The use of more than 2 MySQL Server versions is not supported in
replication setups involving multiple masters, regardless of the number
of master or slave MySQL servers. This restriction applies not only to
major versions, but to minor versions within the same major version as
well. For example, if you are using a chained or circular replication
setup, you cannot use MySQL 5.5.1, MySQL 5.5.2, and MySQL 5.5.4
concurrently, although you could use any 2 of these releases together.

In some cases, it is also possible to replicate between a master and a
slave that is more than one major version newer than the master.
However, there are known issues with trying to replicate from a master
running MySQL 4.1 or earlier to a slave running MySQL 5.1 or later. To
work around such problems, you can insert a MySQL server running an
intermediate version between the two; for example, rather than
replicating directly from a MySQL 4.1 master to a MySQL 5.1 slave, it
is possible to replicate from a MySQL 4.1 server to a MySQL 5.0 server,
and then from the MySQL 5.0 server to a MySQL 5.1 server.

*Important*:

It is strongly recommended to use the most recent release available
within a given MySQL major version because replication (and other)
capabilities are continually being improved. It is also recommended to
upgrade masters and slaves that use early releases of a major version
of MySQL to GA (production) releases when the latter become available
for that major version.

Replication from newer masters to older slaves may be possible, but is
generally not supported. This is due to a number of factors:

   * Binary log format changes

     The binary log format can change between major releases.  While we
     attempt to maintain backward compatibility, this is not always
     possible. For example, the binary log format implemented in MySQL
     5.0 changed considerably from that used in previous versions,
     especially with regard to handling of character sets, *Note `LOAD
     DATA INFILE': load-data, and time zones. This means that
     replication from a MySQL 5.0 (or later) master to a MySQL 4.1 (or
     earlier) slave is generally not supported.

     This also has significant implications for upgrading replication
     servers; see *Note replication-upgrade::, for more information.

   * Use of row-based replication

     Row-based replication was implemented in MySQL 5.1.5, so you
     cannot replicate using row-based replication from any MySQL 5.5 or
     later master to a slave older than MySQL 5.1.5.

     For more information about row-based replication, see *Note
     replication-formats::.

   * SQL incompatibilities

     You cannot replicate from a newer master to an older slave using
     statement-based replication if the statements to be replicated use
     SQL features available on the master but not on the slave.

     However, if both the master and the slave support row-based
     replication, and there are no data definition statements to be
     replicated that depend on SQL features found on the master but not
     on the slave, you can use row-based replication to replicate the
     effects of data modification statements even if the DDL run on the
     master is not supported on the slave.

For more information on potential replication issues, see *Note
replication-features::.


File: manual.info,  Node: replication-upgrade,  Next: replication-problems,  Prev: replication-compatibility,  Up: replication-notes

16.4.3 Upgrading a Replication Setup
------------------------------------

When you upgrade servers that participate in a replication setup, the
procedure for upgrading depends on the current server versions and the
version to which you are upgrading.

This section applies to upgrading replication from older versions of
MySQL to MySQL 5.5. A 4.0 server should be 4.0.3 or newer.

When you upgrade a master to 5.5 from an earlier MySQL release series,
you should first ensure that all the slaves of this master are using
the same 5.5.x release. If this is not the case, you should first
upgrade the slaves. To upgrade each slave, shut it down, upgrade it to
the appropriate 5.5.x version, restart it, and restart replication.
The 5.5 slave is able to read the old relay logs written prior to the
upgrade and to execute the statements they contain. Relay logs created
by the slave after the upgrade are in 5.5 format.

After the slaves have been upgraded, shut down the master, upgrade it
to the same 5.5.x release as the slaves, and restart it. The 5.5 master
is able to read the old binary logs written prior to the upgrade and to
send them to the 5.5 slaves. The slaves recognize the old format and
handle it properly. Binary logs created by the master subsequent to the
upgrade are in 5.5 format. These too are recognized by the 5.5 slaves.

In other words, when upgrading to MySQL 5.5, the slaves must be MySQL
5.5 before you can upgrade the master to 5.5. Note that downgrading from
5.5 to older versions does not work so simply: You must ensure that any
5.5 binary log or relay log has been fully processed, so that you can
remove it before proceeding with the downgrade.

Downgrading a replication setup to a previous version cannot be done
once you have switched from statement-based to row-based replication,
and after the first row-based statement has been written to the binlog.
See *Note replication-formats::.

Some upgrades may require that you drop and re-create database objects
when you move from one MySQL series to the next. For example, collation
changes might require that table indexes be rebuilt. Such operations,
if necessary, will be detailed at *Note
upgrading-from-previous-series::. It is safest to perform these
operations separately on the slaves and the master, and to disable
replication of these operations from the master to the slave. To
achieve this, use the following procedure:

  1. Stop all the slaves and upgrade them. Restart them with the
     `--skip-slave-start' option so that they do not connect to the
     master. Perform any table repair or rebuilding operations needed
     to re-create database objects, such as use of `REPAIR TABLE' or
     `ALTER TABLE', or dumping and reloading tables or triggers.

  2. Disable the binary log on the master. To do this without
     restarting the master, execute a `SET sql_log_bin = 0' statement.
     Alternatively, stop the master and restart it without the
     `--log-bin' option. If you restart the master, you might also want
     to disallow client connections. For example, if all clients
     connect using TCP/IP, use the `--skip-networking' option when you
     restart the master.

  3. With the binary log disabled, perform any table repair or
     rebuilding operations needed to re-create database objects.  The
     binary log must be disabled during this step to prevent these
     operations from being logged and sent to the slaves later.

  4. Re-enable the binary log on the master. If you set `sql_log_bin'
     to 0 earlier, execute a `SET sql_log_bin = 1' statement. If you
     restarted the master to disable the binary log, restart it with
     `--log-bin', and without `--skip-networking' so that clients and
     slaves can connect.

  5. Restart the slaves, this time without the `--skip-slave-start'
     option.


File: manual.info,  Node: replication-problems,  Next: replication-bugs,  Prev: replication-upgrade,  Up: replication-notes

16.4.4 Troubleshooting Replication
----------------------------------

If you have followed the instructions but your replication setup is not
working, the first thing to do is _check the error log for messages_.
Many users have lost time by not doing this soon enough after
encountering problems.

If you cannot tell from the error log what the problem was, try the
following techniques:

   * Verify that the master has binary logging enabled by issuing a
     *Note `SHOW MASTER STATUS': show-master-status. statement.  If
     logging is enabled, `Position' is nonzero.  If binary logging is
     not enabled, verify that you are running the master with the
     `--log-bin' option.

   * Verify that the master and slave both were started with the
     `--server-id' option and that the ID value is unique on each
     server.

   * Verify that the slave is running. Use *Note `SHOW SLAVE STATUS':
     show-slave-status. to check whether the `Slave_IO_Running' and
     `Slave_SQL_Running' values are both `Yes'. If not, verify the
     options that were used when starting the slave server. For example,
     `--skip-slave-start' prevents the slave threads from starting
     until you issue a *Note `START SLAVE': start-slave. statement.

   * If the slave is running, check whether it established a connection
     to the master. Use *Note `SHOW PROCESSLIST': show-processlist,
     find the I/O and SQL threads and check their `State' column to see
     what they display. See *Note replication-implementation-details::.
     If the I/O thread state says `Connecting to master', check the
     following:

        * Verify the privileges for the user being used for replication
          on the master.

        * Check that the host name of the master is correct and that
          you are using the correct port to connect to the master.  The
          port used for replication is the same as used for client
          network communication (the default is `3306'). For the host
          name, ensure that the name resolves to the correct IP address.

        * Check that networking has not been disabled on the master or
          slave. Look for the `skip-networking' option in the
          configuration file. If present, comment it out or remove it.

        * If the master has a firewall or IP filtering configuration,
          ensure that the network port being used for MySQL is not
          being filtered.

        * Check that you can reach the master by using `ping' or
          `traceroute'/`tracert' to reach the host.

   * If the slave was running previously but has stopped, the reason
     usually is that some statement that succeeded on the master failed
     on the slave. This should never happen if you have taken a proper
     snapshot of the master, and never modified the data on the slave
     outside of the slave thread. If the slave stops unexpectedly, it
     is a bug or you have encountered one of the known replication
     limitations described in *Note replication-features::. If it is a
     bug, see *Note replication-bugs::, for instructions on how to
     report it.

   * If a statement that succeeded on the master refuses to run on the
     slave, try the following procedure if it is not feasible to do a
     full database resynchronization by deleting the slave's databases
     and copying a new snapshot from the master:

       1. Determine whether the affected table on the slave is
          different from the master table. Try to understand how this
          happened. Then make the slave's table identical to the
          master's and run *Note `START SLAVE': start-slave.

       2. If the preceding step does not work or does not apply, try to
          understand whether it would be safe to make the update
          manually (if needed) and then ignore the next statement from
          the master.

       3. If you decide that the slave can skip the next statement from
          the master, issue the following statements:

               mysql> SET GLOBAL sql_slave_skip_counter = N;
               mysql> START SLAVE;

          The value of N should be 1 if the next statement from the
          master does not use `AUTO_INCREMENT' or `LAST_INSERT_ID()'.
          Otherwise, the value should be 2. The reason for using a
          value of 2 for statements that use `AUTO_INCREMENT' or
          `LAST_INSERT_ID()' is that they take two events in the binary
          log of the master.

          See also *Note set-global-sql-slave-skip-counter::.

       4. If you are sure that the slave started out perfectly
          synchronized with the master, and that no one has updated the
          tables involved outside of the slave thread, then presumably
          the discrepancy is the result of a bug. If you are running
          the most recent version of MySQL, please report the problem.
          If you are running an older version, try upgrading to the
          latest production release to determine whether the problem
          persists.


File: manual.info,  Node: replication-bugs,  Prev: replication-problems,  Up: replication-notes

16.4.5 How to Report Replication Bugs or Problems
-------------------------------------------------

When you have determined that there is no user error involved, and
replication still either does not work at all or is unstable, it is
time to send us a bug report. We need to obtain as much information as
possible from you to be able to track down the bug.  Please spend some
time and effort in preparing a good bug report.

If you have a repeatable test case that demonstrates the bug, please
enter it into our bugs database using the instructions given in *Note
bug-reports::. If you have a `phantom' problem (one that you cannot
duplicate at will), use the following procedure:

  1. Verify that no user error is involved. For example, if you update
     the slave outside of the slave thread, the data goes out of
     synchrony, and you can have unique key violations on updates. In
     this case, the slave thread stops and waits for you to clean up
     the tables manually to bring them into synchrony. _This is not a
     replication problem. It is a problem of outside interference
     causing replication to fail._

  2. Run the slave with the `--log-slave-updates' and `--log-bin'
     options. These options cause the slave to log the updates that it
     receives from the master into its own binary logs.

  3. Save all evidence before resetting the replication state. If we
     have no information or only sketchy information, it becomes
     difficult or impossible for us to track down the problem. The
     evidence you should collect is:

        * All binary log files from the master

        * All binary log files from the slave

        * The output of *Note `SHOW MASTER STATUS': show-master-status.
          from the master at the time you discovered the problem

        * The output of *Note `SHOW SLAVE STATUS': show-slave-status.
          from the slave at the time you discovered the problem

        * Error logs from the master and the slave

  4. Use *Note `mysqlbinlog': mysqlbinlog. to examine the binary logs.
     The following should be helpful to find the problem statement.
     LOG_FILE and LOG_POS are the `Master_Log_File' and
     `Read_Master_Log_Pos' values from *Note `SHOW SLAVE STATUS':
     show-slave-status.

          shell> mysqlbinlog --start-position=LOG_POS LOG_FILE | head

After you have collected the evidence for the problem, try to isolate
it as a separate test case first. Then enter the problem with as much
information as possible into our bugs database using the instructions
at *Note bug-reports::.


File: manual.info,  Node: mysql-cluster,  Next: partitioning,  Prev: replication,  Up: Top

17 MySQL Cluster NDB 7.2
************************

* Menu:

* mysql-cluster-overview::       MySQL Cluster Overview
* mysql-cluster-installation::   MySQL Cluster Installation and Upgrades
* mysql-cluster-configuration::  Configuration of MySQL Cluster NDB 7.2
* mysql-cluster-programs::       MySQL Cluster Programs
* mysql-cluster-management::     Management of MySQL Cluster
* mysql-cluster-replication::    MySQL Cluster Replication
* mysql-cluster-news::           MySQL Cluster Release Notes

This chapter contains information about _MySQL Cluster_, which is a
high-availability, high-redundancy version of MySQL adapted for the
distributed computing environment.  Recent releases of MySQL Cluster
use version 7 of the *Note `NDBCLUSTER': mysql-cluster. storage engine
(also known as *Note `NDB': mysql-cluster.) to enable running several
computers with MySQL servers and other software in a cluster; the
latest releases available for production use incorporate `NDB' version
7.2.

Support for the *Note `NDBCLUSTER': mysql-cluster. storage engine is
not included in the standard MySQL Server 5.5 binaries built by Oracle.
Instead, users of MySQL Cluster binaries from Oracle should upgrade to
the most recent binary release of MySQL Cluster for supported
platforms--these include RPMs that should work with most Linux
distributions. MySQL Cluster users who build from source should use the
sources provided for MySQL Cluster.  (Locations where the sources can
be obtained are listed later in this section.)

This chapter contains information about MySQL Cluster NDB 7.2 releases
through 5.5.33-ndb-7.2.14. Currently, the MySQL Cluster NDB 7.2 release
series is Generally Available (GA), as is MySQL Cluster NDB 7.1. MySQL
Cluster NDB 7.0 and MySQL Cluster NDB 6.3 are previous GA release
series; although they are still supported, we recommend that new
deployments use MySQL Cluster NDB 7.2. For information about MySQL
Cluster NDB 7.1, MySQL Cluster NDB 7.0, and previous versions of MySQL
Cluster, see MySQL Cluster NDB 6.1 - 7.1
(http://dev.mysql.com/doc/refman/5.1/en/mysql-cluster.html), in the
`MySQL 5.1 Manual'.

Release notes for the changes in each release of MySQL Cluster are
located at MySQL Cluster 7.2 Release Notes
(http://dev.mysql.com/doc/relnotes/mysql-cluster/7.2/en/).

Supported Platforms

MySQL Cluster is currently available and supported on a number of
platforms. For exact levels of support available for on specific
combinations of operating system versions, operating system
distributions, and hardware platforms, please refer to
http://www.mysql.com/support/supportedplatforms/cluster.html.

Availability

MySQL Cluster binary and source packages are available for supported
platforms from `http://dev.mysql.com/downloads/cluster/'.

MySQL Cluster release numbers

MySQL Cluster follows a somewhat different release pattern from the
mainline MySQL Server 5.5 series of releases. In this `Manual' and
other MySQL documentation, we identify these and later MySQL Cluster
releases employing a version number that begins with `NDB'. This version
number is that of the *Note `NDBCLUSTER': mysql-cluster.  storage
engine used in the release, and not of the MySQL server version on
which the MySQL Cluster release is based.

Version strings used in MySQL Cluster software

The version string displayed by MySQL Cluster programs uses this format:

     mysql-MYSQL_SERVER_VERSION-ndb-NDB_ENGINE_VERSION

MYSQL_SERVER_VERSION represents the version of the MySQL Server on
which the MySQL Cluster release is based. For all MySQL Cluster NDB 6.x
and 7.x releases, this is `5.1'. NDB_ENGINE_VERSION is the version of
the *Note `NDB': mysql-cluster. storage engine used by this release of
the MySQL Cluster software. You can see this format used in the *Note
`mysql': mysql. client, as shown here:

     shell> mysql
     Welcome to the MySQL monitor.  Commands end with ; or \g.
     Your MySQL connection id is 2
     Server version: 5.5.33-ndb-7.2.14 Source distribution

     Type 'help;' or '\h' for help. Type '\c' to clear the buffer.

     mysql> SELECT VERSION()\G
     *************************** 1. row ***************************
     VERSION(): 5.5.33-ndb-7.2.14
     1 row in set (0.00 sec)

This version string is also displayed in the output of the `SHOW'
command in the *Note `ndb_mgm': mysql-cluster-programs-ndb-mgm.  client:

     ndb_mgm> SHOW
     Connected to Management Server at: localhost:1186
     Cluster Configuration
     ---------------------
     [ndbd(NDB)]     2 node(s)
     id=1    @10.0.10.6  (5.5.33-ndb-7.2.14, Nodegroup: 0, Master)
     id=2    @10.0.10.8  (5.5.33-ndb-7.2.14, Nodegroup: 0)

     [ndb_mgmd(MGM)] 1 node(s)
     id=3    @10.0.10.2  (5.5.33-ndb-7.2.14)

     [mysqld(API)]   2 node(s)
     id=4    @10.0.10.10  (5.5.33-ndb-7.2.14)
     id=5 (not connected, accepting connect from any host)

The version string identifies the mainline MySQL version from which the
MySQL Cluster release was branched and the version of the *Note
`NDBCLUSTER': mysql-cluster. storage engine used. For example, the full
version string for MySQL Cluster NDB 7.2.4 (the first MySQL Cluster
production release based on MySQL Server 5.5) is
`mysql-5.5.19-ndb-7.2.4'. From this we can determine the following:

   * Since the portion of the version string preceding ``-ndb-'' is the
     base MySQL Server version, this means that MySQL Cluster NDB 7.2.4
     derives from the MySQL 5.5.19, and contains all feature
     enhancements and bugfixes from MySQL 5.5 up to and including MySQL
     5.5.19.

   * Since the portion of the version string following ``-ndb-''
     represents the version number of the *Note `NDB': mysql-cluster.
     (or *Note `NDBCLUSTER': mysql-cluster.) storage engine, MySQL
     Cluster NDB 7.2.4 uses version 7.2.4 of the *Note `NDBCLUSTER':
     mysql-cluster. storage engine.

New MySQL Cluster releases are numbered according to updates in the
`NDB' storage engine, and do not necessarily correspond in a one-to-one
fashion with mainline MySQL Server releases. For example, MySQL Cluster
NDB 7.2.4 (as previously noted) is based on MySQL 5.5.19, while MySQL
Cluster NDB 7.2.0 was based on MySQL 5.1.51 (version string:
`mysql-5.1.51-ndb-7.2.0').

Compatibility with standard MySQL 5.5 releases

While many standard MySQL schemas and applications can work using MySQL
Cluster, it is also true that unmodified applications and database
schemas may be slightly incompatible or have suboptimal performance
when run using MySQL Cluster (see *Note mysql-cluster-limitations::).
Most of these issues can be overcome, but this also means that you are
very unlikely to be able to switch an existing application
datastore--that currently uses, for example, *Note `MyISAM':
myisam-storage-engine.  or *Note `InnoDB': innodb-storage-engine.--to
use the *Note `NDB': mysql-cluster. storage engine without allowing for
the possibility of changes in schemas, queries, and applications. In
addition, the MySQL Server and MySQL Cluster codebases diverge
considerably, so that the standard *Note `mysqld': mysqld. cannot
function as a drop-in replacement for the version of *Note `mysqld':
mysqld. supplied with MySQL Cluster.

MySQL Cluster development source trees

MySQL Cluster development trees can also be accessed from
`https://code.launchpad.net/~mysql/':

The MySQL Cluster development sources maintained at
`https://code.launchpad.net/~mysql/' are licensed under the GPL. For
information about obtaining MySQL sources using Bazaar and building
them yourself, see *Note installing-development-tree::.

*Note*:

As with MySQL Server 5.5, MySQL Cluster NDB 7.2 is built using `CMake'.

Currently, MySQL Cluster NDB 7.0, MySQL Cluster NDB 7.1, and MySQL
Cluster NDB 7.2 releases are all Generally Available (GA), although we
recommend that new deployments use MySQL Cluster NDB 7.2. MySQL Cluster
NDB 6.1, MySQL Cluster NDB 6.2, and MySQL Cluster NDB 6.3, are no
longer in active development. For an overview of major features added
in MySQL Cluster NDB 7.2, see *Note mysql-cluster-development::. For an
overview of major features added in past MySQL Cluster releases through
MySQL Cluster NDB 7.1, see MySQL Cluster Development History
(http://dev.mysql.com/doc/refman/5.1/en/mysql-cluster-development.html).

This chapter represents a work in progress, and its contents are
subject to revision as MySQL Cluster continues to evolve. Additional
information regarding MySQL Cluster can be found on the MySQL Web site
at http://www.mysql.com/products/cluster/.

Additional Resources

More information about MySQL Cluster can be found in the following
places:

   * For answers to some commonly asked questions about MySQL Cluster,
     see *Note faqs-mysql-cluster::.

   * The MySQL Cluster mailing list: `http://lists.mysql.com/cluster'.

   * The MySQL Cluster Forum: `http://forums.mysql.com/list.php?25'.

   * Many MySQL Cluster users and developers blog about their
     experiences with MySQL Cluster, and make feeds of these available
     through PlanetMySQL (http://www.planetmysql.org/).


File: manual.info,  Node: mysql-cluster-overview,  Next: mysql-cluster-installation,  Prev: mysql-cluster,  Up: mysql-cluster

17.1 MySQL Cluster Overview
===========================

* Menu:

* mysql-cluster-basics::         MySQL Cluster Core Concepts
* mysql-cluster-nodes-groups::   MySQL Cluster Nodes, Node Groups, Replicas, and Partitions
* mysql-cluster-overview-requirements::  MySQL Cluster Hardware, Software, and Networking Requirements
* mysql-cluster-development::    MySQL Cluster Development History
* mysql-cluster-compared::       MySQL Server Using `InnoDB' Compared with MySQL Cluster
* mysql-cluster-limitations::    Known Limitations of MySQL Cluster

_MySQL Cluster_ is a technology that enables clustering of in-memory
databases in a shared-nothing system. The shared-nothing architecture
enables the system to work with very inexpensive hardware, and with a
minimum of specific requirements for hardware or software.

MySQL Cluster is designed not to have any single point of failure.  In
a shared-nothing system, each component is expected to have its own
memory and disk, and the use of shared storage mechanisms such as
network shares, network file systems, and SANs is not recommended or
supported.

MySQL Cluster integrates the standard MySQL server with an in-memory
clustered storage engine called *Note `NDB': mysql-cluster.  (which
stands for `_N_etwork _D_ata_B_ase'). In our documentation, the term
*Note `NDB': mysql-cluster. refers to the part of the setup that is
specific to the storage engine, whereas `MySQL Cluster' refers to the
combination of one or more MySQL servers with the *Note `NDB':
mysql-cluster.  storage engine.

A MySQL Cluster consists of a set of computers, known as _hosts_, each
running one or more processes.  These processes, known as _nodes_, may
include MySQL servers (for access to NDB data), data nodes (for storage
of the data), one or more management servers, and possibly other
specialized data access programs. The relationship of these components
in a MySQL Cluster is shown here:

MySQL Cluster Components

All these programs work together to form a MySQL Cluster (see *Note
mysql-cluster-programs::. When data is stored by the *Note `NDB':
mysql-cluster. storage engine, the tables (and table data) are stored
in the data nodes. Such tables are directly accessible from all other
MySQL servers (SQL nodes) in the cluster.  Thus, in a payroll
application storing data in a cluster, if one application updates the
salary of an employee, all other MySQL servers that query this data can
see this change immediately.

Although a MySQL Cluster SQL node uses the *Note `mysqld': mysqld.
server daemon, it differs in a number of critical respects from the
*Note `mysqld': mysqld. binary supplied with the MySQL 5.5
distributions, and the two versions of *Note `mysqld': mysqld. are not
interchangeable.

In addition, a MySQL server that is not connected to a MySQL Cluster
cannot use the *Note `NDB': mysql-cluster. storage engine and cannot
access any MySQL Cluster data.

The data stored in the data nodes for MySQL Cluster can be mirrored;
the cluster can handle failures of individual data nodes with no other
impact than that a small number of transactions are aborted due to
losing the transaction state. Because transactional applications are
expected to handle transaction failure, this should not be a source of
problems.

Individual nodes can be stopped and restarted, and can then rejoin the
system (cluster). Rolling restarts (in which all nodes are restarted in
turn) are used in making configuration changes and software upgrades
(see *Note mysql-cluster-rolling-restart::). Rolling restarts are also
used as part of the process of adding new data nodes online (see *Note
mysql-cluster-online-add-node::). For more information about data
nodes, how they are organized in a MySQL Cluster, and how they handle
and store MySQL Cluster data, see *Note mysql-cluster-nodes-groups::.

Backing up and restoring MySQL Cluster databases can be done using the
`NDB'-native functionality found in the MySQL Cluster management client
and the *Note `ndb_restore': mysql-cluster-programs-ndb-restore.
program included in the MySQL Cluster distribution. For more
information, see *Note mysql-cluster-backup::, and *Note
mysql-cluster-programs-ndb-restore::. You can also use the standard
MySQL functionality provided for this purpose in *Note `mysqldump':
mysqldump. and the MySQL server. See *Note mysqldump::, for more
information.

MySQL Cluster nodes can use a number of different transport mechanisms
for inter-node communications, including TCP/IP using standard 100 Mbps
or faster Ethernet hardware. It is also possible to use the high-speed
_Scalable Coherent Interface_ (SCI) protocol with MySQL Cluster,
although this is not required to use MySQL Cluster. SCI requires special
hardware and software; see *Note mysql-cluster-interconnects::, for
more about SCI and using it with MySQL Cluster.


File: manual.info,  Node: mysql-cluster-basics,  Next: mysql-cluster-nodes-groups,  Prev: mysql-cluster-overview,  Up: mysql-cluster-overview

17.1.1 MySQL Cluster Core Concepts
----------------------------------

_*Note `NDBCLUSTER': mysql-cluster._ (also known as *Note `NDB':
mysql-cluster.) is an in-memory storage engine offering
high-availability and data-persistence features.

The *Note `NDBCLUSTER': mysql-cluster. storage engine can be configured
with a range of failover and load-balancing options, but it is easiest
to start with the storage engine at the cluster level. MySQL Cluster's
*Note `NDB': mysql-cluster. storage engine contains a complete set of
data, dependent only on other data within the cluster itself.

The `Cluster' portion of MySQL Cluster is configured independently of
the MySQL servers. In a MySQL Cluster, each part of the cluster is
considered to be a _node_.

*Note*:

In many contexts, the term `node' is used to indicate a computer, but
when discussing MySQL Cluster it means a _process_. It is possible to
run multiple nodes on a single computer; for a computer on which one or
more cluster nodes are being run we use the term _cluster host_.

There are three types of cluster nodes, and in a minimal MySQL Cluster
configuration, there will be at least three nodes, one of each of these
types:

   * _Management node_: The role of this type of node is to manage the
     other nodes within the MySQL Cluster, performing such functions as
     providing configuration data, starting and stopping nodes, running
     backup, and so forth.  Because this node type manages the
     configuration of the other nodes, a node of this type should be
     started first, before any other node. An MGM node is started with
     the command *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd.

   * _Data node_: This type of node stores cluster data. There are as
     many data nodes as there are replicas, times the number of
     fragments (see *Note mysql-cluster-nodes-groups::). For example,
     with two replicas, each having two fragments, you need four data
     nodes. One replica is sufficient for data storage, but provides no
     redundancy; therefore, it is recommended to have 2 (or more)
     replicas to provide redundancy, and thus high availability. A data
     node is started with the command *Note `ndbd':
     mysql-cluster-programs-ndbd. (see *Note
     mysql-cluster-programs-ndbd::) or *Note `ndbmtd':
     mysql-cluster-programs-ndbmtd. (see *Note
     mysql-cluster-programs-ndbmtd::).

     MySQL Cluster tables are normally stored completely in memory
     rather than on disk (this is why we refer to MySQL Cluster as an
     _in-memory_ database). However, some MySQL Cluster data can be
     stored on disk; see *Note mysql-cluster-disk-data::, for more
     information.

   * _SQL node_: This is a node that accesses the cluster data. In the
     case of MySQL Cluster, an SQL node is a traditional MySQL server
     that uses the *Note `NDBCLUSTER': mysql-cluster. storage engine.
     An SQL node is a *Note `mysqld': mysqld. process started with the
     `--ndbcluster' and `--ndb-connectstring' options, which are
     explained elsewhere in this chapter, possibly with additional
     MySQL server options as well.

     An SQL node is actually just a specialized type of _API node_,
     which designates any application which accesses MySQL Cluster
     data. Another example of an API node is the *Note `ndb_restore':
     mysql-cluster-programs-ndb-restore. utility that is used to
     restore a cluster backup. It is possible to write such
     applications using the NDB API. For basic information about the
     NDB API, see Getting Started with the NDB API
     (http://dev.mysql.com/doc/ndbapi/en/ndb-getting-started.html).

*Important*:

It is not realistic to expect to employ a three-node setup in a
production environment. Such a configuration provides no redundancy; to
benefit from MySQL Cluster's high-availability features, you must use
multiple data and SQL nodes. The use of multiple management nodes is
also highly recommended.

For a brief introduction to the relationships between nodes, node
groups, replicas, and partitions in MySQL Cluster, see *Note
mysql-cluster-nodes-groups::.

Configuration of a cluster involves configuring each individual node in
the cluster and setting up individual communication links between
nodes. MySQL Cluster is currently designed with the intention that data
nodes are homogeneous in terms of processor power, memory space, and
bandwidth. In addition, to provide a single point of configuration, all
configuration data for the cluster as a whole is located in one
configuration file.

The management server manages the cluster configuration file and the
cluster log. Each node in the cluster retrieves the configuration data
from the management server, and so requires a way to determine where
the management server resides. When interesting events occur in the
data nodes, the nodes transfer information about these events to the
management server, which then writes the information to the cluster log.

In addition, there can be any number of cluster client processes or
applications. These include standard MySQL clients, `NDB'-specific API
programs, and management clients. These are described in the next few
paragraphs.

Standard MySQL clients

MySQL Cluster can be used with existing MySQL applications written in
PHP, Perl, C, C++, Java, Python, Ruby, and so on.  Such client
applications send SQL statements to and receive responses from MySQL
servers acting as MySQL Cluster SQL nodes in much the same way that
they interact with standalone MySQL servers.

MySQL clients using a MySQL Cluster as a data source can be modified to
take advantage of the ability to connect with multiple MySQL servers to
achieve load balancing and failover. For example, Java clients using
Connector/J 5.0.6 and later can use `jdbc:mysql:loadbalance://' URLs
(improved in Connector/J 5.1.7) to achieve load balancing
transparently; for more information about using Connector/J with MySQL
Cluster, see Using Connector/J with MySQL Cluster
(http://dev.mysql.com/doc/ndbapi/en/mccj-using-connectorj.html).

`NDB' client programs

Client programs can be written that access MySQL Cluster data directly
from the `NDBCLUSTER' storage engine, bypassing any MySQL Servers that
may connected to the cluster, using the _NDB API_, a high-level C++ API.
Such applications may be useful for specialized purposes where an SQL
interface to the data is not needed. For more information, see The NDB
API (http://dev.mysql.com/doc/ndbapi/en/ndbapi.html).

`NDB'-specific Java applications can also be written for MySQL Cluster
using the _MySQL Cluster Connector for Java_. This MySQL Cluster
Connector includes _ClusterJ_, a high-level database API similar to
object-relational mapping persistence frameworks such as Hibernate and
JPA that connect directly to `NDBCLUSTER', and so does not require
access to a MySQL Server. Support is also provided in MySQL Cluster NDB
7.1 and later for _ClusterJPA_, an OpenJPA implementation for MySQL
Cluster that leverages the strengths of ClusterJ and JDBC; ID lookups
and other fast operations are performed using ClusterJ (bypassing the
MySQL Server), while more complex queries that can benefit from MySQL's
query optimizer are sent through the MySQL Server, using JDBC. See Java
and MySQL Cluster
(http://dev.mysql.com/doc/ndbapi/en/mccj-overview-java.html), and The
ClusterJ API and Data Object Model
(http://dev.mysql.com/doc/ndbapi/en/mccj-overview-clusterj-object-models.html),
for more information.

The Memcache API for MySQL Cluster, implemented as the loadable
_ndbmemcache_ storage engine for memcached version 1.6 and later, is
available beginning with MySQL Cluster NDB 7.2.2. This API can be used
to provide a persistent MySQL Cluster data store, accessed using the
memcache protocol.

The standard `memcached' caching engine is included in the MySQL
Cluster NDB 7.2 distribution (7.2.2 and later). Each `memcached' server
has direct access to data stored in MySQL Cluster, but is also able to
cache data locally and to serve (some) requests from this local cache.

For more information, see `ndbmemcache'--Memcache API for MySQL Cluster
(http://dev.mysql.com/doc/ndbapi/en/ndbmemcache.html).

Management clients

These clients connect to the management server and provide commands for
starting and stopping nodes gracefully, starting and stopping message
tracing (debug versions only), showing node versions and status,
starting and stopping backups, and so on.  An example of this type of
program is the *Note `ndb_mgm': mysql-cluster-programs-ndb-mgm.
management client supplied with MySQL Cluster (see *Note
mysql-cluster-programs-ndb-mgm::).  Such applications can be written
using the _MGM API_, a C-language API that communicates directly with
one or more MySQL Cluster management servers. For more information, see
The MGM API (http://dev.mysql.com/doc/ndbapi/en/mgm-api.html).

Oracle also makes available MySQL Cluster Manager, which provides an
advanced command-line interface simplifying many complex MySQL Cluster
management tasks, such restarting a MySQL Cluster with a large number
of nodes. The MySQL Cluster Manager client also supports commands for
getting and setting the values of most node configuration parameters as
well as *Note `mysqld': mysqld. server options and variables relating
to MySQL Cluster. MySQL Cluster Manager 1.1 provides support for adding
data nodes online. See the MySQL Cluster Manager User Manual
(http://dev.mysql.com/doc/mysql-cluster-manager/1.1/en/index.html), for
more information.

Event logs

MySQL Cluster logs events by category (startup, shutdown, errors,
checkpoints, and so on), priority, and severity. A complete listing of
all reportable events may be found in *Note
mysql-cluster-event-reports::. Event logs are of the two types listed
here:

   * _Cluster log_: Keeps a record of all desired reportable events for
     the cluster as a whole.

   * _Node log_: A separate log which is also kept for each individual
     node.

*Note*:

Under normal circumstances, it is necessary and sufficient to keep and
examine only the cluster log. The node logs need be consulted only for
application development and debugging purposes.

Checkpoint

Generally speaking, when data is saved to disk, it is said that a
_checkpoint_ has been reached. More specific to MySQL Cluster, a
checkpoint is a point in time where all committed transactions are
stored on disk. With regard to the *Note `NDB': mysql-cluster. storage
engine, there are two types of checkpoints which work together to
ensure that a consistent view of the cluster's data is maintained.
These are shown in the following list:

   * _Local Checkpoint (LCP)_: This is a checkpoint that is specific to
     a single node; however, LCPs take place for all nodes in the
     cluster more or less concurrently. An LCP involves saving all of a
     node's data to disk, and so usually occurs every few minutes. The
     precise interval varies, and depends upon the amount of data
     stored by the node, the level of cluster activity, and other
     factors.

   * _Global Checkpoint (GCP)_: A GCP occurs every few seconds, when
     transactions for all nodes are synchronized and the redo-log is
     flushed to disk.

For more information about the files and directories created by local
checkpoints and global checkpoints, see MySQL Cluster Data Node
`FileSystemDir' Files
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals-ndbd-filesystemdir-files.html).


File: manual.info,  Node: mysql-cluster-nodes-groups,  Next: mysql-cluster-overview-requirements,  Prev: mysql-cluster-basics,  Up: mysql-cluster-overview

17.1.2 MySQL Cluster Nodes, Node Groups, Replicas, and Partitions
-----------------------------------------------------------------

This section discusses the manner in which MySQL Cluster divides and
duplicates data for storage.

A number of concepts central to an understanding of this topic are
discussed in the next few paragraphs.

(Data) Node

An *Note `ndbd': mysql-cluster-programs-ndbd. process, which stores a
_replica_ --that is, a copy of the _partition_ (see below) assigned to
the node group of which the node is a member.

Each data node should be located on a separate computer. While it is
also possible to host multiple *Note `ndbd':
mysql-cluster-programs-ndbd.  processes on a single computer, such a
configuration is not supported.

It is common for the terms `node' and `data node' to be used
interchangeably when referring to an *Note `ndbd':
mysql-cluster-programs-ndbd. process; where mentioned, management nodes
(*Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. processes) and SQL
nodes (*Note `mysqld': mysqld. processes) are specified as such in this
discussion.

Node Group

A node group consists of one or more nodes, and stores partitions, or
sets of _replicas_ (see next item).

The number of node groups in a MySQL Cluster is not directly
configurable; it is a function of the number of data nodes and of the
number of replicas (`NoOfReplicas' configuration parameter), as shown
here:

     [NUMBER_OF_NODE_GROUPS] = NUMBER_OF_DATA_NODES / `NoOfReplicas'

Thus, a MySQL Cluster with 4 data nodes has 4 node groups if
`NoOfReplicas' is set to 1 in the `config.ini' file, 2 node groups if
`NoOfReplicas' is set to 2, and 1 node group if `NoOfReplicas' is set
to 4.  Replicas are discussed later in this section; for more
information about `NoOfReplicas', see *Note
mysql-cluster-ndbd-definition::.

*Note*:

All node groups in a MySQL Cluster must have the same number of data
nodes.

You can add new node groups (and thus new data nodes) online, to a
running MySQL Cluster; see *Note mysql-cluster-online-add-node::, for
more information.

Partition

This is a portion of the data stored by the cluster. There are as many
cluster partitions as nodes participating in the cluster. Each node is
responsible for keeping at least one copy of any partitions assigned to
it (that is, at least one replica) available to the cluster.

A replica belongs entirely to a single node; a node can (and usually
does) store several replicas.

`NDB' and user-defined partitioning

MySQL Cluster normally partitions *Note `NDBCLUSTER': mysql-cluster.
tables automatically.  However, in MySQL 5.1 and later MySQL Cluster
releases, it is possible to employ user-defined partitioning with *Note
`NDBCLUSTER': mysql-cluster. tables. This is subject to the following
limitations:

  1. Only `KEY' and `LINEAR KEY' partitioning schemes can be used with
     *Note `NDBCLUSTER': mysql-cluster. tables.

  2. When using *Note `ndbd': mysql-cluster-programs-ndbd, the maximum
     number of partitions that may be defined explicitly for any *Note
     `NDBCLUSTER': mysql-cluster. table is `8 * [NUMBER OF NODE
     GROUPS]'.  (The number of node groups in a MySQL Cluster is
     determined as discussed previously in this section.)

     When using *Note `ndbmtd': mysql-cluster-programs-ndbmtd, this
     maximum is also affected by the number of local query handler
     threads, which is determined by the value of the
     `MaxNoOfExecutionThreads' configuration parameter. In such cases,
     the maxmimum number of partitions that may be defined explicitly
     for an *Note `NDB': mysql-cluster. table is equal to `4 *
     MaxNoOfExecutionThreads * [NUMBER OF NODE GROUPS]'.

     See *Note mysql-cluster-programs-ndbmtd::, for more information.

For more information relating to MySQL Cluster and user-defined
partitioning, see *Note mysql-cluster-limitations::, and *Note
partitioning-limitations-storage-engines::.

Replica

This is a copy of a cluster partition. Each node in a node group stores
a replica. Also sometimes known as a _partition replica_. The number of
replicas is equal to the number of nodes per node group.

The following diagram illustrates a MySQL Cluster with four data nodes,
arranged in two node groups of two nodes each; nodes 1 and 2 belong to
node group 0, and nodes 3 and 4 belong to node group 1. Note that only
data (*Note `ndbd': mysql-cluster-programs-ndbd.) nodes are shown here;
although a working cluster requires an *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm. process for cluster management and at
least one SQL node to access the data stored by the cluster, these have
been omitted in the figure for clarity.

A MySQL Cluster, with 2 node groups having 2 nodes each

The data stored by the cluster is divided into four partitions,
numbered 0, 1, 2, and 3. Each partition is stored--in multiple
copies--on the same node group. Partitions are stored on alternate node
groups as follows:

   * Partition 0 is stored on node group 0; a _primary replica_
     (primary copy) is stored on node 1, and a _backup replica_ (backup
     copy of the partition) is stored on node 2.

   * Partition 1 is stored on the other node group (node group 1); this
     partition's primary replica is on node 3, and its backup replica
     is on node 4.

   * Partition 2 is stored on node group 0. However, the placing of its
     two replicas is reversed from that of Partition 0; for Partition
     2, the primary replica is stored on node 2, and the backup on node
     1.

   * Partition 3 is stored on node group 1, and the placement of its
     two replicas are reversed from those of partition 1. That is, its
     primary replica is located on node 4, with the backup on node 3.

What this means regarding the continued operation of a MySQL Cluster is
this: so long as each node group participating in the cluster has at
least one node operating, the cluster has a complete copy of all data
and remains viable. This is illustrated in the next diagram.

Nodes required to keep a 2x2 cluster viable

In this example, where the cluster consists of two node groups of two
nodes each, any combination of at least one node in node group 0 and at
least one node in node group 1 is sufficient to keep the cluster
`alive' (indicated by arrows in the diagram).  However, if _both_ nodes
from _either_ node group fail, the remaining two nodes are not
sufficient (shown by the arrows marked out with an *X*); in either
case, the cluster has lost an entire partition and so can no longer
provide access to a complete set of all cluster data.


File: manual.info,  Node: mysql-cluster-overview-requirements,  Next: mysql-cluster-development,  Prev: mysql-cluster-nodes-groups,  Up: mysql-cluster-overview

17.1.3 MySQL Cluster Hardware, Software, and Networking Requirements
--------------------------------------------------------------------

One of the strengths of MySQL Cluster is that it can be run on
commodity hardware and has no unusual requirements in this regard,
other than for large amounts of RAM, due to the fact that all live data
storage is done in memory. (It is possible to reduce this requirement
using Disk Data tables--see *Note mysql-cluster-disk-data::, for more
information about these.) Naturally, multiple and faster CPUs can
enhance performance. Memory requirements for other MySQL Cluster
processes are relatively small.

The software requirements for MySQL Cluster are also modest. Host
operating systems do not require any unusual modules, services,
applications, or configuration to support MySQL Cluster. For supported
operating systems, a standard installation should be sufficient. The
MySQL software requirements are simple: all that is needed is a
production release of MySQL Cluster. It is not strictly necessary to
compile MySQL yourself merely to be able to use MySQL Cluster. We
assume that you are using the binaries appropriate to your platform,
available from the MySQL Cluster software downloads page at
`http://dev.mysql.com/downloads/cluster/'.

For communication between nodes, MySQL Cluster supports TCP/IP
networking in any standard topology, and the minimum expected for each
host is a standard 100 Mbps Ethernet card, plus a switch, hub, or
router to provide network connectivity for the cluster as a whole. We
strongly recommend that a MySQL Cluster be run on its own subnet which
is not shared with machines not forming part of the cluster for the
following reasons:

   * Security

     Communications between MySQL Cluster nodes are not encrypted or
     shielded in any way. The only means of protecting transmissions
     within a MySQL Cluster is to run your MySQL Cluster on a protected
     network. If you intend to use MySQL Cluster for Web applications,
     the cluster should definitely reside behind your firewall and not
     in your network's De-Militarized Zone (DMZ
     (http://compnetworking.about.com/cs/networksecurity/g/bldef_dmz.htm))
     or elsewhere.

     See *Note mysql-cluster-security-networking-issues::, for more
     information.

   * Efficiency

     Setting up a MySQL Cluster on a private or protected network
     enables the cluster to make exclusive use of bandwidth between
     cluster hosts. Using a separate switch for your MySQL Cluster not
     only helps protect against unauthorized access to MySQL Cluster
     data, it also ensures that MySQL Cluster nodes are shielded from
     interference caused by transmissions between other computers on
     the network. For enhanced reliability, you can use dual switches
     and dual cards to remove the network as a single point of failure;
     many device drivers support failover for such communication links.

Network communication and latency

MySQL Cluster requires communication between data nodes and API nodes
(including SQL nodes), as well as between data nodes and other data
nodes, to execute queries and updates. Communication latency between
these processes can directly affect the observed performance and
latency of user queries. In addition, to maintain consistency and
service despite the silent failure of nodes, MySQL Cluster uses
heartbeating and timeout mechanisms which treat an extended loss of
communication from a node as node failure. This can lead to reduced
redundancy. Recall that, to maintain data consistency, a MySQL Cluster
shuts down when the last node in a node group fails. Thus, to avoid
increasing the risk of a forced shutdown, breaks in communication
between nodes should be avoided wherever possible.

The failure of a data or API node results in the abort of all
uncommitted transactions involving the failed node. Data node recovery
requires synchronization of the failed node's data from a surviving
data node, and re-establishment of disk-based redo and checkpoint logs,
before the data node returns to service.  This recovery can take some
time, during which the Cluster operates with reduced redundancy.

Heartbeating relies on timely generation of heartbeat signals by all
nodes. This may not be possible if the node is overloaded, has
insufficient machine CPU due to sharing with other programs, or is
experiencing delays due to swapping. If heartbeat generation is
sufficiently delayed, other nodes treat the node that is slow to
respond as failed.

This treatment of a slow node as a failed one may or may not be
desirable in some circumstances, depending on the impact of the node's
slowed operation on the rest of the cluster. When setting timeout
values such as `HeartbeatIntervalDbDb' and `HeartbeatIntervalDbApi' for
MySQL Cluster, care must be taken care to achieve quick detection,
failover, and return to service, while avoiding potentially expensive
false positives.

Where communication latencies between data nodes are expected to be
higher than would be expected in a LAN environment (on the order of 100
µs), timeout parameters must be increased to ensure that any allowed
periods of latency periods are well within configured timeouts.
Increasing timeouts in this way has a corresponding effect on the
worst-case time to detect failure and therefore time to service
recovery.

LAN environments can typically be configured with stable low latency,
and such that they can provide redundancy with fast failover.
Individual link failures can be recovered from with minimal and
controlled latency visible at the TCP level (where MySQL Cluster
normally operates). WAN environments may offer a range of latencies, as
well as redundancy with slower failover times. Individual link failures
may require route changes to propagate before end-to-end connectivity
is restored. At the TCP level this can appear as large latencies on
individual channels.  The worst-case observed TCP latency in these
scenarios is related to the worst-case time for the IP layer to reroute
around the failures.

SCI support

It is also possible to use the high-speed Scalable Coherent Interface
(SCI) with MySQL Cluster, but this is not a requirement. See *Note
mysql-cluster-interconnects::, for more about this protocol and its use
with MySQL Cluster.


File: manual.info,  Node: mysql-cluster-development,  Next: mysql-cluster-compared,  Prev: mysql-cluster-overview-requirements,  Up: mysql-cluster-overview

17.1.4 MySQL Cluster Development History
----------------------------------------

* Menu:

* mysql-cluster-development-5-5-ndb-7-2::  MySQL Cluster Development in MySQL Cluster NDB 7.2

In this section, we discuss changes in the implementation of MySQL
Cluster in MySQL MySQL Cluster NDB 7.2, as compared to MySQL Cluster
NDB 7.1 and earlier releases. Changes and features most likely to be of
interest are shown in the following table:

This table lists changes and features in MySQL Cluster NDB 7.2 that are
most likely to be of interest.

*Note MySQL Cluster NDB 7.2:
mysql-cluster-development-5-5-ndb-7-2.
MySQL Cluster NDB 7.2.1 and later
MySQL Cluster NDB 7.2 releases are
based on MySQL 5.5. For more
information about new features in
MySQL Server 5.5, see *Note
mysql-nutshell::.
Version 2 binary log row events, to
provide support for improvements in
MySQL Cluster Replication conflict
detection (see next item). A given
*Note `mysqld': mysqld. can be made
to use Version 1 or Version 2
binary logging row events with the
`--log-bin-use-v1-row-events'
option.
Two new `primary wins' conflict
detection and resolution functions
`NDB$EPOCH()' and
`NDB$EPOCH_TRANS()' for use in
replication setups with 2 MySQL
Clusters. For more information, see
*Note mysql-cluster-replication::.
Distribution of MySQL users and
privileges across MySQL Cluster SQL
nodes is now supported--see *Note
mysql-cluster-privilege-distribution::.
Improved support for distributed
pushed-down joins, which greatly
improve performance for many joins
that can be executed in parallel on
the data nodes.
Default values for a number of data
node configuration parameters such
as `HeartbeatIntervalDbDb' and
`ArbitrationTimeout' have been
improved.
Support for the Memcache API using
the loadable ndbmemcache storage
engine. See `ndbmemcache'--Memcache
API for MySQL Cluster
(http://dev.mysql.com/doc/ndbapi/en/ndbmemcache.html).

This section contains information about MySQL Cluster NDB 7.2 releases
through 5.5.33-ndb-7.2.14, which is currently available for use in
production beginning with MySQL Cluster NDB 7.2.4. MySQL Cluster NDB
7.1, MySQL Cluster NDB 7.0, and MySQL Cluster NDB 6.3 are previous GA
release series; although these are still supported, we recommend that
new deployments use MySQL Cluster NDB 7.2. For information about MySQL
Cluster NDB 7.1 and previous releases, see MySQL Cluster NDB 6.1 - 7.1
(http://dev.mysql.com/doc/refman/5.1/en/mysql-cluster.html), in the
`MySQL 5.1 Manual'.


File: manual.info,  Node: mysql-cluster-development-5-5-ndb-7-2,  Prev: mysql-cluster-development,  Up: mysql-cluster-development

17.1.4.1 MySQL Cluster Development in MySQL Cluster NDB 7.2
...........................................................

The following improvements to MySQL Cluster have been made in MySQL
Cluster NDB 7.2:

   * Based on MySQL Server 5.5

     Previous MySQL Cluster release series, including MySQL Cluster NDB
     7.1, used MySQL 5.1 as a base. Beginning with MySQL Cluster NDB
     7.2.1, MySQL Cluster NDB 7.2 is based on MySQL Server 5.5, so that
     MySQL Cluster users can benefit from MySQL 5.5's improvements in
     scalability and performance monitoring. As with MySQL 5.5, MySQL
     Cluster NDB 7.2.1 and later use `CMake' for configuring and
     building from source inh place of GNU autotools (used in MySQL 5.1
     and MySQL Cluster releases based on MySQL 5.1). For more
     information about changes and improvements in MySQL 5.5, see *Note
     mysql-nutshell::.

   * Conflict detection using GCI Reflection

     MySQL Cluster Replication implements a new `primary wins' conflict
     detection and resolution mechanism.  _GCI Reflection_ applies in
     two-cluster circulation `active-active' replication setups,
     tracking the order in which changes are applied on the MySQL
     Cluster designated as primary relative to changes originating on
     the other MySQL Cluster (referred to as the secondary). This
     relative ordering is used to determine whether changes originating
     on the slave are concurrent with any changes that originate
     locally, and are therefore potentially in conflict. Two new
     conflict detection functions are added: When using `NDB$EPOCH()',
     rows that are out of sync on the secondary are realigned with
     those on the primary; with `NDB$EPOCH_TRANS()', this realignment
     is applied to transactions. For more information, see *Note
     mysql-cluster-replication-conflict-resolution::.

   * Version 2 binary log row events

     A new format for binary log row events, known as Version 2 binary
     log row events, provides support for improvements in MySQL Cluster
     Replication conflict detection (see previous item) and is intended
     to facilitate further improvements in MySQL Replication. You can
     cause a given *Note `mysqld': mysqld. use Version 1 or Version 2
     binary logging row events with the `--log-bin-use-v1-row-events'
     option. For backwards compatibility, Version 2 binary log row
     events are also available in MySQL Cluster NDB 7.0 (7.0.27 and
     later) and MySQL Cluster NDB 7.1 (7.1.16 and later). However,
     MySQL Cluster NDB 7.0 and MySQL Cluster NDB 7.1 continue to use
     Version 1 binary log row events as the default, whereas the
     default in MySQL Cluster NDB 7.2.1 and later is use Version 2 row
     events for binary logging.

   * Distribution of MySQL users and privileges

     Automatic distribution of MySQL users and privileges across all
     SQL nodes in a given MySQL Cluster is now supported. To enable
     this support, you must first import an SQL script
     `share/mysql/ndb_dist_priv.sql' that is included with the MySQL
     Cluster NDB 7.2 distribution. This script creates several stored
     procedures which you can use to enable privilege distribution and
     perform related tasks.

     When a new MySQL Server joins a MySQL Cluster where privilege
     distribution is in effect, it also participates in the privilege
     distribution automatically.

     Once privilege distribution is enabled, all changes to the grant
     tables made on any *Note `mysqld': mysqld. attached to the cluster
     are immediately available on any other attached MySQL Servers.
     This is true whether the changes are made using *Note `CREATE
     USER': create-user, *Note `GRANT': grant, or any of the other
     statements described elsewhere in this Manual (see *Note
     account-management-sql::.) This includes privileges relating to
     stored routines and views; however, automatic distribution of the
     views or stored routines themselves is not currently supported.

     For more information, see *Note
     mysql-cluster-privilege-distribution::.

   * Distributed pushed-down joins

     Many joins can now be pushed down to the NDB kernel for processing
     on MySQL Cluster data nodes. Previously, a join was handled in
     MySQL Cluster by means of repeated accesses of *Note `NDB':
     mysql-cluster. by the SQL node; however, when pushed-down joins
     are enabled, a pushable join is sent in its entirety to the data
     nodes, where it can be distributed among the data nodes and
     executed in parallel on multiple copies of the data, with a single,
     merged result being returned to *Note `mysqld': mysqld.  This can
     reduce greatly the number of round trips between an SQL node and
     the data nodes required to handle such a join, leading to greatly
     improved performance of join processing.

     It is possible to determine when joins can be pushed down to the
     data nodes by examining the join with *Note `EXPLAIN': explain. A
     number of new system status variables
     (`Ndb_pushed_queries_defined', `Ndb_pushed_queries_dropped',
     `Ndb_pushed_queries_executed', and `Ndb_pushed_reads') and
     additions to the *Note `counters': mysql-cluster-ndbinfo-counters.
     table (in the *Note `ndbinfo': mysql-cluster-ndbinfo.  information
     database) can also be helpful in determining when and how well
     joins are being pushed down.

     More information and examples are available in the description of
     the `ndb_join_pushdown' server system variable. See also the
     description of the status variables referenced in the previous
     paragraph, as well as *Note mysql-cluster-ndbinfo-counters::.

   * Improved default values for data node configuration parameters

     In order to provide more resiliency to environmental issues and
     better handling of some potential failure scenarios, and to
     perform more reliably with increases in memory and other resource
     requirements brought about by recent improvements in join handling
     by *Note `NDB': mysql-cluster, the default values for a number of
     MySQL Cluster data node configuration parameters have been
     changed. The parameters and changes are described in the following
     list:

        * `HeartbeatIntervalDbDb': Default increased from 1500 ms to
          5000 ms.

        * `ArbitrationTimeout': Default increased from 3000 ms to 7500
          ms.

        * `TimeBetweenEpochsTimeout': Now effectively disabled by
          default (default changed from 4000 ms to 0).

        * `SharedGlobalMemory': Default increased from 20 MB to 128 MB.

        * `MaxParallelScansPerFragment': Default increased from 32 to
          256.

        * `CrashOnCorruptedTuple' changed from `FALSE' to `TRUE'.

        * Beginning with MySQL Cluster NDB 7.2.10,
          `DefaultOperationRedoProblemAction' changed from `ABORT' to
          `QUEUE'.

     In addition, the value computed for `MaxNoOfLocalScans' when this
     parameter is not set in `config.ini' has been increased by a
     factor of 4.

   * Fail-fast data nodes

     Beginning with MySQL Cluster NDB 7.2.1, data nodes handle
     corrupted tuples in a fail-fast manner by default. This is a
     change from previous versions of MySQL Cluster where this behavior
     had to be enabled explicitly by enabling the
     `CrashOnCorruptedTuple' configuration parameter. In MySQL Cluster
     NDB 7.2.1 and later, this parameter is enabled by default and must
     be explicitly disabled, in which case data nodes merely log a
     warning whenever they detect a corrupted tuple.

   * Memcache API support (ndbmemcache)

     The Memcached server is a distributed in-memory caching server
     that uses a simple text-based protocol. It is often employed with
     key-value stores. The Memcache API for MySQL Cluster, available
     beginning with MySQL Cluster NDB 7.2.2, is implemented as a
     loadable storage engine for memcached version 1.6 and later. This
     API can be used to access a persistent MySQL Cluster data store
     employing the memcache protocol. It is also possible for the
     `memcached' server to provide a strictly defined interface to
     existing MySQL Cluster tables.

     Each memcache server can both cache data locally and access data
     stored in MySQL Cluster directly. Caching policies are
     configurable. For more information, see `ndbmemcache'--Memcache
     API for MySQL Cluster
     (http://dev.mysql.com/doc/ndbapi/en/ndbmemcache.html), in the
     `MySQL Cluster API Developers Guide'.

   * Rows per partition limit removed

     Previously it was possible to store a maximum of 46137488 rows in
     a single MySQL Cluster partition--that is, per data node.
     Beginning with MySQL Cluster NDB 7.2.9, this limitation has been
     lifted, and there is no longer any practical upper limit to this
     number. (Bug #13844405, Bug #14000373)

MySQL Cluster NDB 7.2 is also supported by MySQL Cluster Manager, which
provides an advanced command-line interface that can simplify many
complex MySQL Cluster management tasks. See MySQL(tm) Cluster Manager
1.2.4 User Manual
(http://dev.mysql.com/doc/cluster-manager/en/index.html), for more
information.


File: manual.info,  Node: mysql-cluster-compared,  Next: mysql-cluster-limitations,  Prev: mysql-cluster-development,  Up: mysql-cluster-overview

17.1.5 MySQL Server Using `InnoDB' Compared with MySQL Cluster
--------------------------------------------------------------

* Menu:

* mysql-cluster-ndb-innodb-engines::  Differences Between the `NDB' and `InnoDB' Storage Engines
* mysql-cluster-ndb-innodb-workloads::  `NDB' and `InnoDB' Workloads
* mysql-cluster-ndb-innodb-usage::  `NDB' and `InnoDB' Feature Usage Summary

MySQL Server offers a number of choices in storage engines. Since both
*Note `NDBCLUSTER': mysql-cluster. and *Note `InnoDB':
innodb-storage-engine. can serve as transactional MySQL storage
engines, users of MySQL Server sometimes become interested in MySQL
Cluster. They see *Note `NDB': mysql-cluster. as a possible alternative
or upgrade to the default *Note `InnoDB': innodb-storage-engine. storage
engine in MySQL 5.5. While *Note `NDB': mysql-cluster. and *Note
`InnoDB': innodb-storage-engine. share common characteristics, there
are differences in architecture and implementation, so that some
existing MySQL Server applications and usage scenarios can be a good
fit for MySQL Cluster, but not all of them.

In this section, we discuss and compare some characteristics of the
*Note `NDB': mysql-cluster. storage engine used by MySQL Cluster NDB
7.2 with *Note `InnoDB': innodb-storage-engine. used in MySQL 5.5. The
next few sections provide a technical comparison.  In many instances,
decisions about when and where to use MySQL Cluster must be made on a
case-by-case basis, taking all factors into consideration. While it is
beyond the scope of this documentation to provide specifics for every
conceivable usage scenario, we also attempt to offer some very general
guidance on the relative suitability of some common types of
applications for *Note `NDB': mysql-cluster. as opposed to *Note
`InnoDB': innodb-storage-engine. backends.

Recent MySQL Cluster NDB 7.2 releases use a *Note `mysqld': mysqld.
based on MySQL 5.5, including support for *Note `InnoDB':
innodb-storage-engine. 1.1. While it is possible to use `InnoDB' tables
with MySQL Cluster, such tables are not clustered. It is also not
possible to use programs or libraries from a MySQL Cluster NDB 7.2
distribution with MySQL Server 5.5, or the reverse.

While it is also true that some types of common business applications
can be run either on MySQL Cluster or on MySQL Server (most likely
using the *Note `InnoDB': innodb-storage-engine. storage engine), there
are some important architectural and implementation differences. *Note
mysql-cluster-ndb-innodb-engines::, provides a summary of the these
differences. Due to the differences, some usage scenarios are clearly
more suitable for one engine or the other; see *Note
mysql-cluster-ndb-innodb-workloads::. This in turn has an impact on the
types of applications that better suited for use with *Note `NDB':
mysql-cluster. or *Note `InnoDB': innodb-storage-engine. See *Note
mysql-cluster-ndb-innodb-usage::, for a comparison of the relative
suitability of each for use in common types of database applications.

For information about the relative characteristics of the *Note `NDB':
mysql-cluster. and *Note `MEMORY': memory-storage-engine. storage
engines, see *Note memory-compared-cluster::.

See *Note storage-engines::, for additional information about MySQL
storage engines.


File: manual.info,  Node: mysql-cluster-ndb-innodb-engines,  Next: mysql-cluster-ndb-innodb-workloads,  Prev: mysql-cluster-compared,  Up: mysql-cluster-compared

17.1.5.1 Differences Between the `NDB' and `InnoDB' Storage Engines
...................................................................

The MySQL Cluster *Note `NDB': mysql-cluster. storage engine is
implemented using a distributed, shared-nothing architecture, which
causes it to behave differently from *Note `InnoDB':
innodb-storage-engine. in a number of ways. For those unaccustomed to
working with *Note `NDB': mysql-cluster, unexpected behaviors can arise
due to its distributed nature with regard to transactions, foreign
keys, table limits, and other characteristics. These are shown in the
following table:

This table lists feature differences between *Note `InnoDB':
innodb-storage-engine. and *Note `NDB': mysql-cluster. storage engines.

Feature                  *Note `InnoDB':          MySQL Cluster *Note
                         innodb-storage-engine.   `NDB': mysql-cluster.
                         1.1                      7.2
_MySQL Server Version_   5.5                      5.5
_*Note `InnoDB':         *Note `InnoDB':          *Note `InnoDB':
innodb-storage-engine.   innodb-storage-engine.   innodb-storage-engine.
Version _                1.1                      1.1
_MySQL Cluster Version _ N/A                      *Note `NDB':
                                                  mysql-cluster. 7.2
_Storage Limits_         64TB                     3TB
                                                  
                                                  (Practical upper limit
                                                  based on 48 data nodes
                                                  with 64GB RAM each; can
                                                  be increased with
                                                  disk-based data and
                                                  BLOBs)
_Foreign Keys_           Yes                      No
                                                  
                                                  (Ignored, as with *Note
                                                  `MyISAM':
                                                  myisam-storage-engine.)
                                                  
                                                  *Note*:
                                                  
                                                  A MySQL Cluster NDB 7.3
                                                  Development Milestone
                                                  Release that includes a
                                                  preview of foreign key
                                                  support for the *Note
                                                  `InnoDB':
                                                  innodb-storage-engine.
                                                  storage engine is now
                                                  available. See
                                                  `http://dev.mysql.com/tech-resources/articles/mysql-cluster-7.3.html',
                                                  for more information.
_Transactions_           All standard types       `READ COMMITTED'
_MVCC_                   Yes                      No
_Data Compression_       Yes                      No
                                                  
                                                  (MySQL Cluster
                                                  checkpoint and backup
                                                  files can be compressed)
_Large Row Support (>    Supported for *Note      Supported for *Note
14K)_                    `VARBINARY':             `BLOB': blob. and *Note
                         binary-varbinary,        `TEXT': blob. columns
                         `VARCHAR', *Note         only
                         `BLOB': blob, and *Note  
                         `TEXT': blob. columns    (Using these types to
                                                  store very large
                                                  amounts of data can
                                                  lower MySQL Cluster
                                                  performance)
_Replication Support_    Asynchronous and         Automatic synchronous
                         semi-synchronous         replication within a
                         replication using MySQL  MySQL Cluster.
                         Replication              
                                                  Asynchronous
                                                  replication between
                                                  MySQL Clusters, using
                                                  MySQL Replication
_Scaleout for Read       Yes (MySQL Replication)  Yes (Automatic
Operations_                                       partitioning in MySQL
                                                  Cluster; MySQL
                                                  Replication)
_Scaleout for Write      Requires                 Yes (Automatic
Operations_              application-level        partitioning in MySQL
                         partitioning (sharding)  Cluster is transparent
                                                  to applications)
_High Availability (HA)_ Requires additional      Yes (Designed for
                         software                 99.999% uptime)
_Node Failure Recovery   Requires additional      Automatic
and Failover_            software                 
                                                  (Key element in MySQL
                                                  Cluster architecture)
_Time for Node Failure   30 seconds or longer     Typically < 1 second
Recovery_                                         
_Real-Time Performance_  No                       Yes
_In-Memory Tables_       No                       Yes
                                                  
                                                  (Some data can
                                                  optionally be stored on
                                                  disk; both in-memory
                                                  and disk data storage
                                                  are durable)
_NoSQL Access to         Native memcached         Yes
Storage Engine _         interface in             
                         development (see the     Multiple APIs,
                         MySQL Dev Zone article   including Memcached,
                         `NoSQL to MySQL with     Node.js/JavaScript,
                         Memcached'               Java, JPA, C++, and
                         (https://dev.mysql.com/tech-resources/articles/nosql-to-mysql-with-memcached.html))HTTP/REST
_Concurrent and          Not supported            Up to 48 writers,
Parallel Writes_                                  optimized for
                                                  concurrent writes
_Conflict Detection and  No                       Yes
Resolution (Multiple                              
Replication Masters)_                             
_Hash Indexes_           No                       Yes
_Online Addition of      Read-only replicas       Yes (all node types)
Nodes_                   using MySQL Replication  
_Online Upgrades_        No                       Yes
_Online Schema           No                       Yes, as part of the
Modifications_                                    MySQL 5.6 Release
                                                  Candidate. See
                                                  https://dev.mysql.com/tech-resources/articles/mysql-5.6-rc.html
                                                  (https://dev.mysql.com/tech-resources/articles/mysql-5.6-rc.html),
                                                  for more information


File: manual.info,  Node: mysql-cluster-ndb-innodb-workloads,  Next: mysql-cluster-ndb-innodb-usage,  Prev: mysql-cluster-ndb-innodb-engines,  Up: mysql-cluster-compared

17.1.5.2 `NDB' and `InnoDB' Workloads
.....................................

MySQL Cluster has a range of unique attributes that make it ideal to
serve applications requiring high availability, fast failover, high
throughput, and low latency. Due to its distributed architecture and
multi-node implementation, MySQL Cluster also has specific constraints
that may keep some workloads from performing well. A number of major
differences in behavior between the *Note `NDB': mysql-cluster. and
*Note `InnoDB': innodb-storage-engine. storage engines with regard to
some common types of database-driven application workloads are shown in
the following table::

This table lists major differences in behavior between *Note `InnoDB':
innodb-storage-engine. and *Note `NDB': mysql-cluster. storage engines
with regard to common types of database-driven application workloads.

Workload                 *Note `InnoDB':          MySQL Cluster (*Note
                         innodb-storage-engine.   `NDB': mysql-cluster.)
_High-Volume OLTP        Yes                      Yes
Applications_                                     
_DSS Applications (data  Yes                      Limited (Join
marts, analytics)_                                operations across OLTP
                                                  datasets not exceeding
                                                  3TB in size)
_Custom Applications_    Yes                      Yes
_Packaged Applications_  Yes                      Limited (should be
                                                  mostly primary key
                                                  access)
                                                  
                                                  *Note*:
                                                  
                                                  A MySQL Cluster NDB 7.3
                                                  Development Milestone
                                                  Release that includes a
                                                  preview of foreign key
                                                  support for the *Note
                                                  `InnoDB':
                                                  innodb-storage-engine.
                                                  storage engine is now
                                                  available. See
                                                  `http://dev.mysql.com/tech-resources/articles/mysql-cluster-7.3.html',
                                                  for more information.
_In-Network Telecoms     No                       Yes
Applications (HLR, HSS,                           
SDP)_                                             
_Session Management and  Yes                      Yes
Caching_                                          
_E-Commerce              Yes                      Yes
Applications_                                     
_User Profile            Yes                      Yes
Management, AAA                                   
Protocol_                                         


File: manual.info,  Node: mysql-cluster-ndb-innodb-usage,  Prev: mysql-cluster-ndb-innodb-workloads,  Up: mysql-cluster-compared

17.1.5.3 `NDB' and `InnoDB' Feature Usage Summary
.................................................

When comparing application feature requirements to the capabilities of
*Note `InnoDB': innodb-storage-engine. with *Note `NDB': mysql-cluster,
some are clearly more compatible with one storage engine than the
other. For example, since *Note `NDB': mysql-cluster. does not support
foreign keys, an application that requires them and cannot be
re-engineered to remove this requirement is likely not to be a good
match for MySQL Cluster.

*Note*:

A MySQL Cluster NDB 7.3 Development Milestone Release that includes a
preview of foreign key support for the *Note `InnoDB':
innodb-storage-engine. storage engine is now available. See
`http://dev.mysql.com/tech-resources/articles/mysql-cluster-7.3.html',
for more information.

The following table lists supported application features according to
the storage engine to which each feature is typically better suited.

This table lists supported application features according to the
storage engine to which each feature is typically better suited.

Preferred application requirements   Preferred application requirements
for *Note `InnoDB':                  for *Note `NDB': mysql-cluster.
innodb-storage-engine.               
   * Foreign keys                       * Write scaling
                                     
     *Note*:                            * 99.999% uptime
                                     
     A MySQL Cluster NDB 7.3            * Online addition of nodes and
     Development Milestone Release        online schema operations
     that includes a preview of      
     foreign key support for the        * Multiple SQL and NoSQL APIs
     *Note `InnoDB':                      (see MySQL Cluster APIs:
     innodb-storage-engine. storage       Overview and Concepts
     engine is now available. See         (http://dev.mysql.com/doc/ndbapi/en/mysql-cluster-api-overview.html))
     `http://dev.mysql.com/tech-resources/articles/mysql-cluster-7.3.html',
     for more information.              * Real-time performance
                                     
   * Full table scans                   * Limited use of *Note `BLOB':
                                          blob.  columns
   * Very large databases, rows, or  
     transactions                    
                                     
   * Transactions other than `READ   
     COMMITTED'                      

File: manual.info,  Node: mysql-cluster-limitations,  Prev: mysql-cluster-compared,  Up: mysql-cluster-overview

17.1.6 Known Limitations of MySQL Cluster
-----------------------------------------

* Menu:

* mysql-cluster-limitations-syntax::  Noncompliance with SQL Syntax in MySQL Cluster
* mysql-cluster-limitations-limits::  Limits and Differences of MySQL Cluster from Standard MySQL Limits
* mysql-cluster-limitations-transactions::  Limits Relating to Transaction Handling in MySQL Cluster
* mysql-cluster-limitations-error-handling::  MySQL Cluster Error Handling
* mysql-cluster-limitations-database-objects::  Limits Associated with Database Objects in MySQL Cluster
* mysql-cluster-limitations-unsupported::  Unsupported or Missing Features in MySQL Cluster
* mysql-cluster-limitations-performance::  Limitations Relating to Performance in MySQL Cluster
* mysql-cluster-limitations-exclusive-to-cluster::  Issues Exclusive to MySQL Cluster
* mysql-cluster-limitations-disk-data::  Limitations Relating to MySQL Cluster Disk Data Storage
* mysql-cluster-limitations-multiple-nodes::  Limitations Relating to Multiple MySQL Cluster Nodes
* mysql-cluster-limitations-resolved::  Previous MySQL Cluster Issues Resolved in MySQL 5.1, MySQL Cluster NDB 6.x, and MySQL Cluster NDB 7.x

In the sections that follow, we discuss known limitations in current
releases of MySQL Cluster as compared with the features available when
using the `MyISAM' and `InnoDB' storage engines. If you check the
`Cluster' category in the MySQL bugs database at
`http://bugs.mysql.com', you can find known bugs in the following
categories under `MySQL Server:' in the MySQL bugs database at
`http://bugs.mysql.com', which we intend to correct in upcoming
releases of MySQL Cluster:

   * MySQL Cluster

   * Cluster Direct API (NDBAPI)

   * Cluster Disk Data

   * Cluster Replication

   * ClusterJ

This information is intended to be complete with respect to the
conditions just set forth. You can report any discrepancies that you
encounter to the MySQL bugs database using the instructions given in
*Note bug-reports::. If we do not plan to fix the problem in MySQL
Cluster NDB 6.X or 7.X, we will add it to the list.

See *Note mysql-cluster-limitations-resolved:: for a list of issues in
MySQL Cluster in MySQL 5.1 that have been resolved in the current
version.

*Note*:

Limitations and other issues specific to MySQL Cluster Replication are
described in *Note mysql-cluster-replication-issues::.


File: manual.info,  Node: mysql-cluster-limitations-syntax,  Next: mysql-cluster-limitations-limits,  Prev: mysql-cluster-limitations,  Up: mysql-cluster-limitations

17.1.6.1 Noncompliance with SQL Syntax in MySQL Cluster
.......................................................

Some SQL statements relating to certain MySQL features produce errors
when used with *Note `NDB': mysql-cluster. tables, as described in the
following list:

   * Temporary tables

     Temporary tables are not supported. Trying either to create a
     temporary table that uses the *Note `NDB': mysql-cluster. storage
     engine or to alter an existing temporary table to use *Note `NDB':
     mysql-cluster. fails with the error `Table storage engine
     'ndbcluster' does not support the create option 'TEMPORARY''.

   * Indexes and keys in `NDB' tables

     Keys and indexes on MySQL Cluster tables are subject to the
     following limitations:

        * Column width

          Attempting to create an index on an `NDB' table column whose
          width is greater than 3072 bytes succeeds, but only the first
          3072 bytes are actually used for the index. In such cases, a
          warning `Specified key was too long; max key length is 3072
          bytes' is issued, and a *Note `SHOW CREATE TABLE':
          show-create-table. statement shows the length of the index as
          3072.

        * `TEXT' and `BLOB' columns

          You cannot create indexes on *Note `NDB': mysql-cluster.
          table columns that use any of the *Note `TEXT': blob. or
          *Note `BLOB': blob. data types.

        * `FULLTEXT' indexes

          The *Note `NDB': mysql-cluster. storage engine does not
          support `FULLTEXT' indexes, which are possible for `MyISAM'
          tables only.

          However, you can create indexes on *Note `VARCHAR': char.
          columns of *Note `NDB': mysql-cluster. tables.

        * `USING HASH' keys and `NULL'

          Using nullable columns in unique keys and primary keys means
          that queries using these columns are handled as full table
          scans. To work around this issue, make the column `NOT NULL',
          or re-create the index without the `USING HASH' option.

        * Prefixes

          There are no prefix indexes; only entire columns can be
          indexed. (The size of an `NDB' column index is always the
          same as the width of the column in bytes, up to and including
          3072 bytes, as described earlier in this section. Also see
          *Note mysql-cluster-limitations-unsupported::, for additional
          information.)

        * `BIT' columns

          A *Note `BIT': bit-type. column cannot be a primary key,
          unique key, or index, nor can it be part of a composite
          primary key, unique key, or index.

        * `AUTO_INCREMENT' columns

          Like other MySQL storage engines, the *Note `NDB':
          mysql-cluster. storage engine can handle a maximum of one
          `AUTO_INCREMENT' column per table.  However, in the case of a
          Cluster table with no explicit primary key, an
          `AUTO_INCREMENT' column is automatically defined and used as a
          `hidden' primary key. For this reason, you cannot define a
          table that has an explicit `AUTO_INCREMENT' column unless that
          column is also declared using the `PRIMARY KEY' option.
          Attempting to create a table with an `AUTO_INCREMENT' column
          that is not the table's primary key, and using the *Note
          `NDB': mysql-cluster. storage engine, fails with an error.

   * MySQL Cluster and geometry data types

     Geometry data types (`WKT' and `WKB') are supported for *Note
     `NDB': mysql-cluster. tables. However, spatial indexes are not
     supported.

   * Character sets and binary log files

     Currently, the `ndb_apply_status' and `ndb_binlog_index' tables
     are created using the `latin1' (ASCII) character set.  Because
     names of binary logs are recorded in this table, binary log files
     named using non-Latin characters are not referenced correctly in
     these tables. This is a known issue, which we are working to fix.
     (Bug #50226)

     To work around this problem, use only Latin-1 characters when
     naming binary log files or setting any the `--basedir',
     `--log-bin', or `--log-bin-index' options.

   * Creating `NDBCLUSTER' tables with user-defined partitioning

     Support for user-defined partitioning for MySQL Cluster in MySQL
     5.1 (including MySQL Cluster NDB 6.X and 7.X through 7.1) is
     restricted to [`LINEAR'] `KEY' partitioning. Beginning with MySQL
     5.1.12, using any other partitioning type with `ENGINE=NDB' or
     `ENGINE=NDBCLUSTER' in a *Note `CREATE TABLE': create-table.
     statement results in an error.

     Default partitioning scheme

     As of MySQL 5.1.6, all MySQL Cluster tables are by default
     partitioned by `KEY' using the table's primary key as the
     partitioning key. If no primary key is explicitly set for the
     table, the `hidden' primary key automatically created by the *Note
     `NDBCLUSTER': mysql-cluster. storage engine is used instead. For
     additional discussion of these and related issues, see *Note
     partitioning-key::.

     *Note `CREATE TABLE': create-table. and *Note `ALTER TABLE':
     alter-table. statements that would cause a user-partitioned *Note
     `NDBCLUSTER': mysql-cluster. table not to meet either or both of
     the following two requirements are not permitted, and fail with an
     error:

       1. The table must have an explicit primary key.

       2. All columns listed in the table's partitioning expression
          must be part of the primary key.

     Exception

     If a user-partitioned *Note `NDBCLUSTER': mysql-cluster. table is
     created using an empty column-list (that is, using `PARTITION BY
     [LINEAR] KEY()'), then no explicit primary key is required.

     Maximum number of partitions for `NDBCLUSTER' tables

     The maximum number of partitions that can defined for a *Note
     `NDBCLUSTER': mysql-cluster. table when employing user-defined
     partitioning is 8 per node group.  (See *Note
     mysql-cluster-nodes-groups::, for more information about MySQL
     Cluster node groups.

     `DROP PARTITION' not supported

     It is not possible to drop partitions from *Note `NDB':
     mysql-cluster. tables using `ALTER TABLE ... DROP PARTITION'. The
     other partitioning extensions to *Note `ALTER TABLE':
     alter-table.--`ADD PARTITION', `REORGANIZE PARTITION', and
     `COALESCE PARTITION'--are supported for Cluster tables, but use
     copying and so are not optimized. See *Note
     partitioning-management-range-list:: and *Note alter-table::.

   * Row-based replication

     When using row-based replication with MySQL Cluster, binary
     logging cannot be disabled. That is, the *Note `NDB':
     mysql-cluster. storage engine ignores the value of `sql_log_bin'.
     (Bug #16680)


File: manual.info,  Node: mysql-cluster-limitations-limits,  Next: mysql-cluster-limitations-transactions,  Prev: mysql-cluster-limitations-syntax,  Up: mysql-cluster-limitations

17.1.6.2 Limits and Differences of MySQL Cluster from Standard MySQL Limits
...........................................................................

In this section, we list limits found in MySQL Cluster that either
differ from limits found in, or that are not found in, standard MySQL.

Memory usage and recovery

Memory consumed when data is inserted into an *Note `NDB':
mysql-cluster. table is not automatically recovered when deleted, as it
is with other storage engines.  Instead, the following rules hold true:

   * A *Note `DELETE': delete. statement on an *Note `NDB':
     mysql-cluster. table makes the memory formerly used by the deleted
     rows available for re-use by inserts on the same table only.
     However, this memory can be made available for general re-use by
     performing *Note `OPTIMIZE TABLE': optimize-table.

     A rolling restart of the cluster also frees any memory used by
     deleted rows. See *Note mysql-cluster-rolling-restart::.

   * A *Note `DROP TABLE': drop-table. or *Note `TRUNCATE TABLE':
     truncate-table. operation on an *Note `NDB': mysql-cluster. table
     frees the memory that was used by this table for re-use by any
     *Note `NDB': mysql-cluster. table, either by the same table or by
     another *Note `NDB': mysql-cluster. table.

     *Note*:

     Recall that *Note `TRUNCATE TABLE': truncate-table.  drops and
     re-creates the table. See *Note truncate-table::.

   * Limits imposed by the cluster's configuration

     A number of hard limits exist which are configurable, but
     available main memory in the cluster sets limits. See the complete
     list of configuration parameters in *Note
     mysql-cluster-config-file::. Most configuration parameters can be
     upgraded online. These hard limits include:

        * Database memory size and index memory size (`DataMemory' and
          `IndexMemory', respectively).

          `DataMemory' is allocated as 32KB pages. As each `DataMemory'
          page is used, it is assigned to a specific table; once
          allocated, this memory cannot be freed except by dropping the
          table.

          See *Note mysql-cluster-ndbd-definition::, for more
          information.

        * The maximum number of operations that can be performed per
          transaction is set using the configuration parameters
          `MaxNoOfConcurrentOperations' and `MaxNoOfLocalOperations'.

          *Note*:

          Bulk loading, *Note `TRUNCATE TABLE': truncate-table, and
          *Note `ALTER TABLE': alter-table. are handled as special
          cases by running multiple transactions, and so are not subject
          to this limitation.

        * Different limits related to tables and indexes. For example,
          the maximum number of ordered indexes in the cluster is
          determined by `MaxNoOfOrderedIndexes', and the maximum number
          of ordered indexes per table is 16.

   * Node and data object maximums

     The following limits apply to numbers of cluster nodes and
     metadata objects:

        * The maximum number of data nodes is 48.

          A data node must have a node ID in the range of 1 to 49,
          inclusive. (Management and API nodes may use node IDs in the
          range 1 to 255, inclusive.)

        * The total maximum number of nodes in a MySQL Cluster is 255.
          This number includes all SQL nodes (MySQL Servers), API nodes
          (applications accessing the cluster other than MySQL
          servers), data nodes, and management servers.

        * The maximum number of metadata objects in current versions of
          MySQL Cluster is 20320. This limit is hard-coded.

     See *Note mysql-cluster-limitations-resolved::, for more
     information.


File: manual.info,  Node: mysql-cluster-limitations-transactions,  Next: mysql-cluster-limitations-error-handling,  Prev: mysql-cluster-limitations-limits,  Up: mysql-cluster-limitations

17.1.6.3 Limits Relating to Transaction Handling in MySQL Cluster
.................................................................

A number of limitations exist in MySQL Cluster with regard to the
handling of transactions. These include the following:

   * Transaction isolation level

     The *Note `NDBCLUSTER': mysql-cluster. storage engine supports
     only the `READ COMMITTED' transaction isolation level.  (`InnoDB',
     for example, supports `READ COMMITTED', `READ UNCOMMITTED',
     `REPEATABLE READ', and `SERIALIZABLE'.) See *Note
     mysql-cluster-backup-troubleshooting::, for information on how
     this can affect backing up and restoring Cluster databases.)

   * Transactions and `BLOB' or `TEXT' columns

     *Note `NDBCLUSTER': mysql-cluster. stores only part of a column
     value that uses any of MySQL's *Note `BLOB': blob. or *Note
     `TEXT': blob. data types in the table visible to MySQL; the
     remainder of the *Note `BLOB': blob. or *Note `TEXT': blob. is
     stored in a separate internal table that is not accessible to
     MySQL.  This gives rise to two related issues of which you should
     be aware whenever executing *Note `SELECT': select. statements on
     tables that contain columns of these types:

       1. For any *Note `SELECT': select. from a MySQL Cluster table:
          If the *Note `SELECT': select. includes a *Note `BLOB': blob.
          or *Note `TEXT': blob. column, the `READ COMMITTED'
          transaction isolation level is converted to a read with read
          lock. This is done to guarantee consistency.

       2. For any *Note `SELECT': select. which uses a unique key
          lookup to retrieve any columns that use any of the *Note
          `BLOB': blob. or *Note `TEXT': blob. data types and that is
          executed within a transaction, a shared read lock is held on
          the table for the duration of the transaction--that is, until
          the transaction is either committed or aborted.

          This issue does not occur for queries that use index or table
          scans, even against *Note `NDB': mysql-cluster. tables having
          *Note `BLOB': blob. or *Note `TEXT': blob. columns.

          For example, consider the table `t' defined by the following
          *Note `CREATE TABLE': create-table. statement:

               CREATE TABLE t (
                   a INT NOT NULL AUTO_INCREMENT PRIMARY KEY,
                   b INT NOT NULL,
                   c INT NOT NULL,
                   d TEXT,
                   INDEX i(b),
                   UNIQUE KEY u(c)
               ) ENGINE = NDB,

          Either of the following queries on `t' causes a shared read
          lock, because the first query uses a primary key lookup and
          the second uses a unique key lookup:

               SELECT * FROM t WHERE a = 1;

               SELECT * FROM t WHERE c = 1;

          However, none of the four queries shown here causes a shared
          read lock:

               SELECT * FROM t WHERE b 1;

               SELECT * FROM t WHERE d = '1';

               SELECT * FROM t;

               SELECT b,c WHERE a = 1;

          This is because, of these four queries, the first uses an
          index scan, the second and third use table scans, and the
          fourth, while using a primary key lookup, does not retrieve
          the value of any *Note `BLOB': blob. or *Note `TEXT': blob.
          columns.

          You can help minimize issues with shared read locks by
          avoiding queries that use unique key lookups that retrieve
          *Note `BLOB': blob. or *Note `TEXT': blob. columns, or, in
          cases where such queries are not avoidable, by committing
          transactions as soon as possible afterward.

   * Rollbacks

     There are no partial transactions, and no partial rollbacks of
     transactions. A duplicate key or similar error causes the entire
     transaction to be rolled back.

     This behavior differs from that of other transactional storage
     engines such as *Note `InnoDB': innodb-storage-engine.  that may
     roll back individual statements.

   * Transactions and memory usage

     As noted elsewhere in this chapter, MySQL Cluster does not handle
     large transactions well; it is better to perform a number of small
     transactions with a few operations each than to attempt a single
     large transaction containing a great many operations. Among other
     considerations, large transactions require very large amounts of
     memory. Because of this, the transactional behavior of a number of
     MySQL statements is effected as described in the following list:

        * *Note `TRUNCATE TABLE': truncate-table. is not transactional
          when used on *Note `NDB': mysql-cluster. tables. If a *Note
          `TRUNCATE TABLE': truncate-table. fails to empty the table,
          then it must be re-run until it is successful.

        * `DELETE FROM' (even with no `WHERE' clause) _is_
          transactional. For tables containing a great many rows, you
          may find that performance is improved by using several
          `DELETE FROM ... LIMIT ...' statements to `chunk' the delete
          operation.  If your objective is to empty the table, then you
          may wish to use *Note `TRUNCATE TABLE': truncate-table.
          instead.

        * `LOAD DATA' statements

          *Note `LOAD DATA INFILE': load-data. is not transactional
          when used on *Note `NDB': mysql-cluster. tables.

          *Important*:

          When executing a *Note `LOAD DATA INFILE': load-data.
          statement, the *Note `NDB': mysql-cluster. engine performs
          commits at irregular intervals that enable better utilization
          of the communication network. It is not possible to know
          ahead of time when such commits take place.

          `LOAD DATA FROM MASTER'
          (http://dev.mysql.com/doc/refman/5.1/en/load-data-from-master.html)
          is not supported in MySQL Cluster.

        * `ALTER TABLE' and transactions

          When copying an *Note `NDB': mysql-cluster. table as part of
          an *Note `ALTER TABLE': alter-table, the creation of the copy
          is nontransactional. (In any case, this operation is rolled
          back when the copy is deleted.)

   * Transactions and the `COUNT()' function

     When using MySQL Cluster Replication, it is not possible to
     guarantee the transactional consistency of the `COUNT()' function
     on the slave. In other words, when performing on the master a
     series of statements (*Note `INSERT': insert, *Note `DELETE':
     delete, or both) that changes the number of rows in a table within
     a single transaction, executing `SELECT COUNT(*) FROM TABLE'
     queries on the slave may yield intermediate results. This is due
     to the fact that `SELECT COUNT(...)' may perform dirty reads, and
     is not a bug in the *Note `NDB': mysql-cluster. storage engine.
     (See Bug #31321 for more information.)


File: manual.info,  Node: mysql-cluster-limitations-error-handling,  Next: mysql-cluster-limitations-database-objects,  Prev: mysql-cluster-limitations-transactions,  Up: mysql-cluster-limitations

17.1.6.4 MySQL Cluster Error Handling
.....................................

Starting, stopping, or restarting a node may give rise to temporary
errors causing some transactions to fail. These include the following
cases:

   * Temporary errors

     When first starting a node, it is possible that you may see Error
     1204 `Temporary failure, distribution changed' and similar
     temporary errors.

   * Errors due to node failure

     The stopping or failure of any data node can result in a number of
     different node failure errors. (However, there should be no
     aborted transactions when performing a planned shutdown of the
     cluster.)

In either of these cases, any errors that are generated must be handled
within the application. This should be done by retrying the transaction.

See also *Note mysql-cluster-limitations-limits::.


File: manual.info,  Node: mysql-cluster-limitations-database-objects,  Next: mysql-cluster-limitations-unsupported,  Prev: mysql-cluster-limitations-error-handling,  Up: mysql-cluster-limitations

17.1.6.5 Limits Associated with Database Objects in MySQL Cluster
.................................................................

Some database objects such as tables and indexes have different
limitations when using the *Note `NDBCLUSTER': mysql-cluster. storage
engine:

   * Number of database objects

     The maximum number of _all_ *Note `NDB': mysql-cluster. database
     objects in a single MySQL Cluster--including databases, tables,
     and indexes--is limited to 20320.

   * Attributes per table

     The maximum number of attributes (that is, columns and indexes)
     that can belong to a given table is 512.

   * Attributes per key

     The maximum number of attributes per key is 32.

   * Row size

     The maximum permitted size of any one row is 14000 bytes (as of
     MySQL Cluster NDB 7.0). Each *Note `BLOB': blob. or *Note `TEXT':
     blob. column contributes 256 + 8 = 264 bytes to this total.


File: manual.info,  Node: mysql-cluster-limitations-unsupported,  Next: mysql-cluster-limitations-performance,  Prev: mysql-cluster-limitations-database-objects,  Up: mysql-cluster-limitations

17.1.6.6 Unsupported or Missing Features in MySQL Cluster
.........................................................

A number of features supported by other storage engines are not
supported for *Note `NDB': mysql-cluster. tables. Trying to use any of
these features in MySQL Cluster does not cause errors in or of itself;
however, errors may occur in applications that expects the features to
be supported or enforced:

   * Foreign key constraints

     The foreign key construct is ignored, just as it is in `MyISAM'
     tables.

   * Index prefixes

     Prefixes on indexes are not supported for `NDBCLUSTER' tables. If
     a prefix is used as part of an index specification in a statement
     such as *Note `CREATE TABLE': create-table, *Note `ALTER TABLE':
     alter-table, or *Note `CREATE INDEX': create-index, the prefix is
     ignored.

   * `LOAD TABLE ... FROM MASTER'

     `LOAD TABLE FROM MASTER'
     (http://dev.mysql.com/doc/refman/5.1/en/load-table-from-master.html)
     is not supported.

   * Savepoints and rollbacks

     Savepoints and rollbacks to savepoints are ignored as in `MyISAM'.

   * Durability of commits

     There are no durable commits on disk. Commits are replicated, but
     there is no guarantee that logs are flushed to disk on commit.

   * Replication

     Statement-based replication is not supported. Use
     `--binlog-format=ROW' (or `--binlog-format=MIXED') when setting up
     cluster replication. See *Note mysql-cluster-replication::, for
     more information.

*Note*:

See *Note mysql-cluster-limitations-transactions::, for more
information relating to limitations on transaction handling in *Note
`NDB': mysql-cluster.


File: manual.info,  Node: mysql-cluster-limitations-performance,  Next: mysql-cluster-limitations-exclusive-to-cluster,  Prev: mysql-cluster-limitations-unsupported,  Up: mysql-cluster-limitations

17.1.6.7 Limitations Relating to Performance in MySQL Cluster
.............................................................

The following performance issues are specific to or especially
pronounced in MySQL Cluster:

   * Range scans

     There are query performance issues due to sequential access to the
     *Note `NDB': mysql-cluster. storage engine; it is also relatively
     more expensive to do many range scans than it is with either
     `MyISAM' or `InnoDB'.

   * Reliability of `Records in range'

     The `Records in range' statistic is available but is not
     completely tested or officially supported. This may result in
     nonoptimal query plans in some cases. If necessary, you can employ
     `USE INDEX' or `FORCE INDEX' to alter the execution plan. See
     *Note index-hints::, for more information on how to do this.

   * Unique hash indexes

     Unique hash indexes created with `USING HASH' cannot be used for
     accessing a table if `NULL' is given as part of the key.


File: manual.info,  Node: mysql-cluster-limitations-exclusive-to-cluster,  Next: mysql-cluster-limitations-disk-data,  Prev: mysql-cluster-limitations-performance,  Up: mysql-cluster-limitations

17.1.6.8 Issues Exclusive to MySQL Cluster
..........................................

The following are limitations specific to the *Note `NDBCLUSTER':
mysql-cluster. storage engine:

   * Machine architecture

     All machines used in the cluster must have the same architecture.
     That is, all machines hosting nodes must be either big-endian or
     little-endian, and you cannot use a mixture of both. For example,
     you cannot have a management node running on a PowerPC which
     directs a data node that is running on an x86 machine. This
     restriction does not apply to machines simply running *Note
     `mysql': mysql.  or other clients that may be accessing the
     cluster's SQL nodes.

   * Binary logging

     MySQL Cluster has the following limitations or restrictions with
     regard to binary logging:

        * `sql_log_bin' has no effect on data operations; however, it
          is supported for schema operations.

        * MySQL Cluster cannot produce a binary log for tables having
          *Note `BLOB': blob. columns but no primary key.

        * Only the following schema operations are logged in a cluster
          binary log which is _not_ on the *Note `mysqld': mysqld.
          executing the statement:

             * *Note `CREATE TABLE': create-table.

             * *Note `ALTER TABLE': alter-table.

             * *Note `DROP TABLE': drop-table.

             * *Note `CREATE DATABASE': create-database. / *Note
               `CREATE SCHEMA': create-database.

             * *Note `DROP DATABASE': drop-database. / *Note `DROP
               SCHEMA': drop-database.

             * *Note `CREATE TABLESPACE': create-tablespace.

             * *Note `ALTER TABLESPACE': alter-tablespace.

             * *Note `DROP TABLESPACE': drop-tablespace.

             * *Note `CREATE LOGFILE GROUP': create-logfile-group.

             * *Note `ALTER LOGFILE GROUP': alter-logfile-group.

             * *Note `DROP LOGFILE GROUP': drop-logfile-group.

See also *Note mysql-cluster-limitations-multiple-nodes::.


File: manual.info,  Node: mysql-cluster-limitations-disk-data,  Next: mysql-cluster-limitations-multiple-nodes,  Prev: mysql-cluster-limitations-exclusive-to-cluster,  Up: mysql-cluster-limitations

17.1.6.9 Limitations Relating to MySQL Cluster Disk Data Storage
................................................................

Disk Data object maximums and minimums

Disk data objects are subject to the following maximums and minimums:

   * Maximum number of tablespaces: 2^32 (4294967296)

   * Maximum number of data files per tablespace: 2^16 (65536)

   * Maximum data file size: The theoretical limit is 64G; however, the
     practical upper limit is 32G. This is equivalent to 32768 extents
     of 1M each.

     Since a MySQL Cluster Disk Data table can use at most 1
     tablespace, this means that the theoretical upper limit to the
     amount of data (in bytes) that can be stored on disk by a single
     `NDB' table is 32G * 65536 = 2251799813685248, or approximately 2
     petabytes.

   * The theoretical maximum number of extents per tablespace data file
     is 2^16 (65536); however, for practical purposes, the recommended
     maximum number of extents per data file is 2^15 (32768).

     The minimum and maximum possible sizes of extents for tablespace
     data files are 32K and 2G, respectively. See *Note
     create-tablespace::, for more information.

Disk Data tables and diskless mode

Use of Disk Data tables is not supported when running the cluster in
diskless mode. Beginning with MySQL 5.1.12, it is prohibited
altogether. (Bug #20008)


File: manual.info,  Node: mysql-cluster-limitations-multiple-nodes,  Next: mysql-cluster-limitations-resolved,  Prev: mysql-cluster-limitations-disk-data,  Up: mysql-cluster-limitations

17.1.6.10 Limitations Relating to Multiple MySQL Cluster Nodes
..............................................................

Multiple SQL nodes

The following are issues relating to the use of multiple MySQL servers
as MySQL Cluster SQL nodes, and are specific to the *Note `NDBCLUSTER':
mysql-cluster. storage engine:

   * No distributed table locks

     A *Note `LOCK TABLES': lock-tables. works only for the SQL node on
     which the lock is issued; no other SQL node in the cluster `sees'
     this lock. This is also true for a lock issued by any statement
     that locks tables as part of its operations. (See next item for an
     example.)

   * `ALTER TABLE' operations

     *Note `ALTER TABLE': alter-table. is not fully locking when
     running multiple MySQL servers (SQL nodes).  (As discussed in the
     previous item, MySQL Cluster does not support distributed table
     locks.)

Multiple management nodes

When using multiple management servers:

   * You must give nodes explicit IDs in connect strings because
     automatic allocation of node IDs does not work across multiple
     management servers.

   * When a management server starts, it first checks for any other
     management server in the same MySQL Cluster, and upon successful
     connection to the other management server uses its configuration
     data. This means that the management server `--reload' and
     `--initial' startup options are ignored unless the management
     server is the only one running. It also means that, when
     performing a rolling restart of a MySQL Cluster with multiple
     management nodes, the management server reads its own
     configuration file if (and only if) it is the only management
     server running in this MySQL Cluster. See *Note
     mysql-cluster-rolling-restart::, for more information.

Multiple network addresses

Multiple network addresses per data node are not supported.  Use of
these is liable to cause problems: In the event of a data node failure,
an SQL node waits for confirmation that the data node went down but
never receives it because another route to that data node remains open.
This can effectively make the cluster inoperable.

*Note*:

It is possible to use multiple network hardware _interfaces_ (such as
Ethernet cards) for a single data node, but these must be bound to the
same address.  This also means that it not possible to use more than one
`[tcp]' section per connection in the `config.ini' file. See *Note
mysql-cluster-tcp-definition::, for more information.


File: manual.info,  Node: mysql-cluster-limitations-resolved,  Prev: mysql-cluster-limitations-multiple-nodes,  Up: mysql-cluster-limitations

17.1.6.11 Previous MySQL Cluster Issues Resolved in MySQL 5.1, MySQL Cluster NDB 6.x, and MySQL Cluster NDB 7.x
...............................................................................................................

A number of limitations and related issues existing in earlier versions
of MySQL Cluster have been resolved:

   * Variable-length column support

     The *Note `NDBCLUSTER': mysql-cluster. storage engine now supports
     variable-length column types for in-memory tables.

     Previously, for example, any Cluster table having one or more
     *Note `VARCHAR': char. fields which contained only relatively
     small values, much more memory and disk space were required when
     using the *Note `NDBCLUSTER': mysql-cluster. storage engine than
     would have been the case for the same table and data using the
     `MyISAM' engine. In other words, in the case of a *Note `VARCHAR':
     char. column, such a column required the same amount of storage as
     a *Note `CHAR': char. column of the same size.  In MySQL 5.1, this
     is no longer the case for in-memory tables, where storage
     requirements for variable-length column types such as *Note
     `VARCHAR': char.  and `BINARY' are comparable to those for these
     column types when used in `MyISAM' tables (see *Note
     storage-requirements::).

     *Important*:

     For MySQL Cluster Disk Data tables, the fixed-width limitation
     continues to apply. See *Note mysql-cluster-disk-data::.

   * Replication with MySQL Cluster

     It is now possible to use MySQL replication with Cluster
     databases. For details, see *Note mysql-cluster-replication::.

     Circular Replication

     Circular replication is also supported with MySQL Cluster,
     beginning with MySQL 5.1.18. See *Note
     mysql-cluster-replication-multi-master::.

   * `auto_increment_increment' and `auto_increment_offset'

     The `auto_increment_increment' and `auto_increment_offset' server
     system variables are supported for MySQL Cluster Replication.

   * Backup and restore between architectures

     It is possible to perform a Cluster backup and restore between
     different architectures. Previously--for example--you could not
     back up a cluster running on a big-endian platform and then
     restore from that backup to a cluster running on a little-endian
     system. (Bug #19255)

   * Multiple data nodes, multi-threaded data nodes

     MySQL Cluster NDB 7.2 supports multiple data node processes on a
     single host as well as multi-threaded data node processes. See
     *Note mysql-cluster-programs-ndbmtd::, for more information.

   * Identifiers

     Formerly (in MySQL 5.0 and earlier), database names, table names
     and attribute names could not be as long for *Note `NDB':
     mysql-cluster. tables as tables using other storage engines,
     because attribute names were truncated internally. In MySQL 5.1
     and later, names of MySQL Cluster databases, tables, and table
     columns follow the same rules regarding length as they do for any
     other storage engine.

   * Length of `CREATE TABLE' statements

     *Note `CREATE TABLE': create-table. statements may be no more than
     4096 characters in length. _This limitation affects MySQL 5.1.6,
     5.1.7, and 5.1.8 only_. (See Bug #17813)

   * `IGNORE' and `REPLACE' functionality

     In MySQL 5.1.7 and earlier, *Note `INSERT IGNORE': insert, *Note
     `UPDATE IGNORE': update, and *Note `REPLACE': replace. were
     supported only for primary keys, but not for unique keys. It was
     possible to work around this issue by removing the constraint, then
     dropping the unique index, performing any inserts, and then adding
     the unique index again.

     This limitation was removed for *Note `INSERT IGNORE': insert. and
     *Note `REPLACE': replace.  in MySQL 5.1.8. (See Bug #17431.)

   * `AUTO_INCREMENT' columns

     In MySQL 5.1.10 and earlier versions, the maximum number of tables
     having `AUTO_INCREMENT' columns--including those belonging to
     hidden primary keys--was 2048.

     This limitation was lifted in MySQL 5.1.11.

   * Maximum number of cluster nodes

     The total maximum number of nodes in a MySQL Cluster is 255,
     including all SQL nodes (MySQL Servers), API nodes (applications
     accessing the cluster other than MySQL servers), data nodes, and
     management servers. The total number of data nodes and management
     nodes is 63, of which up to 48 can be data nodes.

     *Note*:

     A data node cannot have a node ID greater than 49.

   * Recovery of memory from deleted rows

     Memory can be reclaimed from an *Note `NDB': mysql-cluster. table
     for reuse with any *Note `NDB': mysql-cluster. table by employing
     *Note `OPTIMIZE TABLE': optimize-table, subject to the following
     limitations:

        * Only in-memory tables are supported; the *Note `OPTIMIZE
          TABLE': optimize-table. statement has no effect on MySQL
          Cluster Disk Data tables.

        * Only variable-length columns (such as those declared as *Note
          `VARCHAR': char, *Note `TEXT': blob, or *Note `BLOB': blob.)
          are supported.

          However, you can force columns defined using fixed-length
          data types (such as *Note `CHAR': char.) to be dynamic using
          the `ROW_FORMAT' or `COLUMN_FORMAT' option with a *Note
          `CREATE TABLE': create-table. or *Note `ALTER TABLE':
          alter-table. statement.

          See *Note create-table::, and *Note alter-table::, for
          information on these options.

     You can regulate the effects of `OPTIMIZE' on performance by
     adjusting the value of the global system variable
     `ndb_optimization_delay', which sets the number of milliseconds to
     wait between batches of rows being processed by `OPTIMIZE'. The
     default value is 10 milliseconds. It is possible to set a lower
     value (to a minimum of `0'), but not recommended. The maximum is
     100000 milliseconds (that is, 100 seconds).

   * Number of tables

     The maximum number of *Note `NDBCLUSTER': mysql-cluster. tables in
     a single MySQL Cluster is included in the total maximum number of
     *Note `NDBCLUSTER': mysql-cluster. database objects (20320). (See
     *Note mysql-cluster-limitations-database-objects::.)

   * Adding and dropping of data nodes

     In MySQL Cluster NDB 7.2 (MySQL Cluster NDB 7.0 and later), it is
     possible to add new data nodes to a running MySQL Cluster by
     performing a rolling restart, so that the cluster and the data
     stored in it remain available to applications.

     When planning to increase the number of data nodes in the cluster
     online, you should be aware of and take into account the following
     issues:

        * New data nodes can be added online to a MySQL Cluster only as
          part of a new node group.

        * New data nodes can be added online, but cannot be dropped
          online. Reducing the number of data nodes requires a system
          restart of the cluster.

        * As in previous MySQL Cluster releases, it is not possible to
          change online either the number of replicas (`NoOfReplicas'
          configuration parameter) or the number of data nodes per node
          group. These changes require a system restart.

        * Redistribution of existing cluster data using the new data
          nodes is not automatic; however, this can be accomplished
          using simple SQL statements in the *Note `mysql': mysql.
          client or other MySQL client application once the nodes have
          been added. During this procedure, it is not possible to
          perform DDL operations, although DML operations can continue
          as normal.

          The distribution of new cluster data (that is, data stored in
          the cluster _after_ the new nodes have been added) uses the
          new nodes without manual intervention.

     For more information, see *Note mysql-cluster-online-add-node::.

   * Distribution of MySQL users and privileges

     Previously, MySQL users and privileges created on one SQL node
     were unique to that SQL node, due to the fact that the MySQL grant
     tables were restricted to using the *Note `MyISAM':
     myisam-storage-engine. storage engine.  Beginning with MySQL
     Cluster NDB 7.2.0, it is possible, following installation of the
     MySQL Cluster software and setup of the desired users and
     privileges on one SQL node, to convert the grant tables to use
     *Note `NDB': mysql-cluster. and thus to distribute the users and
     privileges across all SQL nodes connected to the cluster. You can
     do this by loading and making use of a set of stored procedures
     defined in an SQL script supplied with the MySQL Cluster
     distribution. For more information, see *Note
     mysql-cluster-privilege-distribution::.

   * Number of rows per partition

     Previously, a single MySQL Cluster partition could hold a maximum
     of 46137488 rows. This limitation was removed in MySQL Cluster NDB
     7.2.9. (Bug #13844405, Bug #14000373)

     If you are still using a previous MySQL Cluster release, you can
     work around this limitation by taking advantage of the fact that
     the number of partitions is the same as the number of data nodes
     in the cluster (see *Note mysql-cluster-nodes-groups::). This means
     that, by increasing the number of data nodes, you can increase the
     available space for storing data.

     MySQL Cluster NDB 7.2 also supports increasing the number of data
     nodes in the cluster while the cluster remains in operation. See
     *Note mysql-cluster-online-add-node::, for more information.

     It is also possible to increase the number of partitions for *Note
     `NDB': mysql-cluster. tables by using explicit `KEY' or `LINEAR
     KEY' partitioning (see *Note partitioning-key::).


File: manual.info,  Node: mysql-cluster-installation,  Next: mysql-cluster-configuration,  Prev: mysql-cluster-overview,  Up: mysql-cluster

17.2 MySQL Cluster Installation and Upgrades
============================================

* Menu:

* mysql-cluster-install-linux::  Installing MySQL Cluster on Linux
* mysql-cluster-install-windows::  Installing MySQL Cluster on Windows
* mysql-cluster-install-configuration::  Initial Configuration of MySQL Cluster
* mysql-cluster-install-first-start::  Initial Startup of MySQL Cluster
* mysql-cluster-install-example-data::  MySQL Cluster Example with Tables and Data
* mysql-cluster-install-shutdown-restart::  Safe Shutdown and Restart of MySQL Cluster
* mysql-cluster-upgrade-downgrade::  Upgrading and Downgrading MySQL Cluster NDB 7.2

This section describes the basics for planning, installing,
configuring, and running a MySQL Cluster. Whereas the examples in *Note
mysql-cluster-configuration:: provide more in-depth information on a
variety of clustering options and configuration, the result of
following the guidelines and procedures outlined here should be a
usable MySQL Cluster which meets the _minimum_ requirements for
availability and safeguarding of data.

For information about upgrading or downgrading a MySQL Cluster between
release versions, see *Note mysql-cluster-upgrade-downgrade::.

This section covers hardware and software requirements; networking
issues; installation of MySQL Cluster; configuration issues; starting,
stopping, and restarting the cluster; loading of a sample database; and
performing queries.

Assumptions

The following sections make a number of assumptions regarding the
cluster's physical and network configuration. These assumptions are
discussed in the next few paragraphs.

Cluster nodes and host computers

The cluster consists of four nodes, each on a separate host computer,
and each with a fixed network address on a typical Ethernet network as
shown here:

This table lists cluster nodes for an example configuration and
provides the IP address of each node.

Node                                 IP Address
Management node (`mgmd')             192.168.0.10
SQL node (*Note `mysqld': mysqld.)   192.168.0.20
Data node "A" (*Note `ndbd':         192.168.0.30
mysql-cluster-programs-ndbd.)        
Data node "B" (*Note `ndbd':         192.168.0.40
mysql-cluster-programs-ndbd.)        

This may be made clearer by the following diagram:

MySQL Cluster Multi-Computer Setup

Network addressing

In the interest of simplicity (and reliability), this `How-To' uses
only numeric IP addresses.  However, if DNS resolution is available on
your network, it is possible to use host names in lieu of IP addresses
in configuring Cluster. Alternatively, you can use the `hosts' file
(typically `/etc/hosts' for Linux and other Unix-like operating systems,
`C:\WINDOWS\system32\drivers\etc\hosts' on Windows, or your operating
system's equivalent) for providing a means to do host lookup if such is
available.

Potential hosts file issues

A common problem when trying to use host names for Cluster nodes arises
because of the way in which some operating systems (including some
Linux distributions) set up the system's own host name in the
`/etc/hosts' during installation. Consider two machines with the host
names `ndb1' and `ndb2', both in the `cluster' network domain. Red Hat
Linux (including some derivatives such as CentOS and Fedora) places the
following entries in these machines' `/etc/hosts' files:

     #  ndb1 `/etc/hosts':
     127.0.0.1   ndb1.cluster ndb1 localhost.localdomain localhost

     #  ndb2 `/etc/hosts':
     127.0.0.1   ndb2.cluster ndb2 localhost.localdomain localhost

SUSE Linux (including OpenSUSE) places these entries in the machines'
`/etc/hosts' files:

     #  ndb1 `/etc/hosts':
     127.0.0.1       localhost
     127.0.0.2       ndb1.cluster ndb1

     #  ndb2 `/etc/hosts':
     127.0.0.1       localhost
     127.0.0.2       ndb2.cluster ndb2

In both instances, `ndb1' routes `ndb1.cluster' to a loopback IP
address, but gets a public IP address from DNS for `ndb2.cluster',
while `ndb2' routes `ndb2.cluster' to a loopback address and obtains a
public address for `ndb1.cluster'. The result is that each data node
connects to the management server, but cannot tell when any other data
nodes have connected, and so the data nodes appear to hang while
starting.

*Caution*:

You cannot mix `localhost' and other host names or IP addresses in
`config.ini'. For these reasons, the solution in such cases (other than
to use IP addresses for _all_ `config.ini' `HostName' entries) is to
remove the fully qualified host names from `/etc/hosts' and use these in
`config.ini' for all cluster hosts.

Host computer type

Each host computer in our installation scenario is an Intel-based
desktop PC running a supported operating system installed to disk in a
standard configuration, and running no unnecessary services.  The core
operating system with standard TCP/IP networking capabilities should be
sufficient. Also for the sake of simplicity, we also assume that the
file systems on all hosts are set up identically. In the event that
they are not, you should adapt these instructions accordingly.

Network hardware

Standard 100 Mbps or 1 gigabit Ethernet cards are installed on each
machine, along with the proper drivers for the cards, and that all four
hosts are connected through a standard-issue Ethernet networking
appliance such as a switch. (All machines should use network cards with
the same throughout. That is, all four machines in the cluster should
have 100 Mbps cards _or_ all four machines should have 1 Gbps cards.)
MySQL Cluster works in a 100 Mbps network; however, gigabit Ethernet
provides better performance.

*Important*:

MySQL Cluster is _not_ intended for use in a network for which
throughput is less than 100 Mbps or which experiences a high degree of
latency. For this reason (among others), attempting to run a MySQL
Cluster over a wide area network such as the Internet is not likely to
be successful, and is not supported in production.

Sample data

We use the `world' database which is available for download from the
MySQL Web site (see `http://dev.mysql.com/doc/index-other.html'). We
assume that each machine has sufficient memory for running the operating
system, required MySQL Cluster processes, and (on the data nodes)
storing the database.

For general information about installing MySQL, see *Note installing::.
For information about installation of MySQL Cluster on Linux and other
Unix-like operating systems, see *Note mysql-cluster-install-linux::.
For information about installation of MySQL Cluster on Windows
operating systems, see *Note mysql-cluster-install-windows::.

For general information about MySQL Cluster hardware, software, and
networking requirements, see *Note
mysql-cluster-overview-requirements::.


File: manual.info,  Node: mysql-cluster-install-linux,  Next: mysql-cluster-install-windows,  Prev: mysql-cluster-installation,  Up: mysql-cluster-installation

17.2.1 Installing MySQL Cluster on Linux
----------------------------------------

* Menu:

* mysql-cluster-install-linux-binary::  Installing a MySQL Cluster Binary Release on Linux
* mysql-cluster-install-linux-rpm::  Installing MySQL Cluster from RPM
* mysql-cluster-install-linux-source::  Building MySQL Cluster from Source on Linux

This section covers installation of MySQL Cluster on Linux and other
Unix-like operating systems. While the next few sections refer to a
Linux operating system, the instructions and procedures given there
should be easily adaptable to other supported Unix-like platforms.

MySQL Cluster NDB 7.2 is also available for Windows operating systems;
for installation and setup instructions specific to Windows, see *Note
mysql-cluster-install-windows::.

Each MySQL Cluster host computer must have the correct executable
programs installed. A host running an SQL node must have installed on
it a MySQL Server binary (*Note `mysqld': mysqld.).  Management nodes
require the management server daemon (*Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd.); data nodes require the data node
daemon (*Note `ndbd': mysql-cluster-programs-ndbd. or *Note `ndbmtd':
mysql-cluster-programs-ndbmtd.). It is not necessary to install the
MySQL Server binary on management node hosts and data node hosts. It is
recommended that you also install the management client (*Note
`ndb_mgm': mysql-cluster-programs-ndb-mgm.) on the management server
host.

Installation of MySQL Cluster on Linux can be done using precompiled
binaries from Oracle (downloaded as a .tar.gz archive), with RPM
packages (also available from Oracle), or from source code. All three
of these installation methods are described in the section that follow.

Regardless of the method used, it is still necessary following
installation of the MySQL Cluster binaries to create configuration
files for all cluster nodes, before you can start the cluster. See
*Note mysql-cluster-install-configuration::.


File: manual.info,  Node: mysql-cluster-install-linux-binary,  Next: mysql-cluster-install-linux-rpm,  Prev: mysql-cluster-install-linux,  Up: mysql-cluster-install-linux

17.2.1.1 Installing a MySQL Cluster Binary Release on Linux
...........................................................

This section covers the steps necessary to install the correct
executables for each type of Cluster node from precompiled binaries
supplied by Oracle.

For setting up a cluster using precompiled binaries, the first step in
the installation process for each cluster host is to download the
latest MySQL Cluster NDB 7.2 binary archive
(`mysql-cluster-gpl-7.2.14-linux-i686-glibc23.tar.gz') from the MySQL
Cluster downloads area (http://dev.mysql.com/downloads/cluster/). We
assume that you have placed this file in each machine's `/var/tmp'
directory.  (If you do require a custom binary, see *Note
installing-development-tree::.)

*Note*:

After completing the installation, do not yet start any of the
binaries. We show you how to do so following the configuration of the
nodes (see *Note mysql-cluster-install-configuration::).

SQL nodes

On each of the machines designated to host SQL nodes, perform the
following steps as the system `root' user:

  1. Check your `/etc/passwd' and `/etc/group' files (or use whatever
     tools are provided by your operating system for managing users and
     groups) to see whether there is already a `mysql' group and `mysql'
     user on the system. Some OS distributions create these as part of
     the operating system installation process. If they are not already
     present, create a new `mysql' user group, and then add a `mysql'
     user to this group:

          shell> groupadd mysql
          shell> useradd -g mysql mysql

     The syntax for `useradd' and `groupadd' may differ slightly on
     different versions of Unix, or they may have different names such
     as `adduser' and `addgroup'.

  2. Change location to the directory containing the downloaded file,
     unpack the archive, and create a symbolic link named `mysql' to
     the `mysql' directory. Note that the actual file and directory
     names vary according to the MySQL Cluster version number.

          shell> cd /var/tmp
          shell> tar -C /usr/local -xzvf mysql-cluster-gpl-7.2.14-linux2.6.tar.gz
          shell> ln -s /usr/local/mysql-cluster-gpl-7.2.14-linux2.6-i686 /usr/local/mysql

  3. Change location to the `mysql' directory and run the supplied
     script for creating the system databases:

          shell> cd mysql
          shell> scripts/mysql_install_db --user=mysql

  4. Set the necessary permissions for the MySQL server and data
     directories:

          shell> chown -R root .
          shell> chown -R mysql data
          shell> chgrp -R mysql .

  5. Copy the MySQL startup script to the appropriate directory, make
     it executable, and set it to start when the operating system is
     booted up:

          shell> cp support-files/mysql.server /etc/rc.d/init.d/
          shell> chmod +x /etc/rc.d/init.d/mysql.server
          shell> chkconfig --add mysql.server

     (The startup scripts directory may vary depending on your
     operating system and version--for example, in some Linux
     distributions, it is `/etc/init.d'.)

     Here we use Red Hat's `chkconfig' for creating links to the
     startup scripts; use whatever means is appropriate for this
     purpose on your platform, such as `update-rc.d' on Debian.

Remember that the preceding steps must be repeated on each machine
where an SQL node is to reside.

Data nodes

Installation of the data nodes does not require the *Note `mysqld':
mysqld. binary. Only the MySQL Cluster data node executable *Note
`ndbd': mysql-cluster-programs-ndbd. (single-threaded) or *Note
`ndbmtd': mysql-cluster-programs-ndbmtd. (multi-threaded) is required.
These binaries can also be found in the `.tar.gz' archive. Again, we
assume that you have placed this archive in `/var/tmp'.

As system `root' (that is, after using `sudo', `su root', or your
system's equivalent for temporarily assuming the system administrator
account's privileges), perform the following steps to install the data
node binaries on the data node hosts:

  1. Change location to the `/var/tmp' directory, and extract the *Note
     `ndbd': mysql-cluster-programs-ndbd. and *Note `ndbmtd':
     mysql-cluster-programs-ndbmtd. binaries from the archive into a
     suitable directory such as `/usr/local/bin':

          shell> cd /var/tmp
          shell> tar -zxvf mysql-5.5.33-ndb-7.2.14-linux-i686-glibc23.tar.gz
          shell> cd mysql-5.5.33-ndb-7.2.14-linux-i686-glibc23
          shell> cp bin/ndbd /usr/local/bin/ndbd
          shell> cp bin/ndbmtd /usr/local/bin/ndbmtd

     (You can safely delete the directory created by unpacking the
     downloaded archive, and the files it contains, from `/var/tmp' once
     *Note `ndb_mgm': mysql-cluster-programs-ndb-mgm. and *Note
     `ndb_mgmd': mysql-cluster-programs-ndb-mgmd.  have been copied to
     the executables directory.)

  2. Change location to the directory into which you copied the files,
     and then make both of them executable:

          shell> cd /usr/local/bin
          shell> chmod +x ndb*

The preceding steps should be repeated on each data node host.

Although only one of the data node executables is required to run a
MySQL Cluster data node, we have shown you how to install both *Note
`ndbd': mysql-cluster-programs-ndbd. and *Note `ndbmtd':
mysql-cluster-programs-ndbmtd. in the preceding instructions. We
recommend that you do this when installing or upgrading MySQL Cluster,
even if you plan to use only one of them, since this will save time and
trouble in the event that you later decide to change from one to the
other.

*Note*:

The data directory on each machine hosting a data node is
`/usr/local/mysql/data'. This piece of information is essential when
configuring the management node.  (See *Note
mysql-cluster-install-configuration::.)

Management nodes

Installation of the management node does not require the *Note
`mysqld': mysqld. binary. Only the MySQL Cluster management server
(*Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd.) is required; you
most likely want to install the management client (*Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm.) as well. Both of these binaries also
be found in the `.tar.gz' archive.  Again, we assume that you have
placed this archive in `/var/tmp'.

As system `root', perform the following steps to install *Note
`ndb_mgmd': mysql-cluster-programs-ndb-mgmd. and *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm. on the management node host:

  1. Change location to the `/var/tmp' directory, and extract the *Note
     `ndb_mgm': mysql-cluster-programs-ndb-mgm. and *Note `ndb_mgmd':
     mysql-cluster-programs-ndb-mgmd. from the archive into a suitable
     directory such as `/usr/local/bin':

          shell> cd /var/tmp
          shell> tar -zxvf mysql-5.5.33-ndb-7.2.14-linux2.6-i686.tar.gz
          shell> cd mysql-5.5.33-ndb-7.2.14-linux2.6-i686
          shell> cp bin/ndb_mgm* /usr/local/bin

     (You can safely delete the directory created by unpacking the
     downloaded archive, and the files it contains, from `/var/tmp' once
     *Note `ndb_mgm': mysql-cluster-programs-ndb-mgm. and *Note
     `ndb_mgmd': mysql-cluster-programs-ndb-mgmd.  have been copied to
     the executables directory.)

  2. Change location to the directory into which you copied the files,
     and then make both of them executable:

          shell> cd /usr/local/bin
          shell> chmod +x ndb_mgm*

In *Note mysql-cluster-install-configuration::, we create configuration
files for all of the nodes in our example MySQL Cluster.


File: manual.info,  Node: mysql-cluster-install-linux-rpm,  Next: mysql-cluster-install-linux-source,  Prev: mysql-cluster-install-linux-binary,  Up: mysql-cluster-install-linux

17.2.1.2 Installing MySQL Cluster from RPM
..........................................

This section covers the steps necessary to install the correct
executables for each type of MySQL Cluster node using RPM packages
supplied by Oracle.

RPMs are available for both 32-bit and 64-bit Linux platforms.  The
filenames for these RPMs use the following pattern:

     MySQL-Cluster-COMPONENT-PRODUCTTYPE-NDBVERSION.DISTRIBUTION.ARCHITECTURE.rpm

     COMPONENT:= {server | client [| OTHER]}

     PRODUCTTYPE:= {gpl | advanced}

     NDBVERSION:= MAJOR.MINOR.RELEASE

     DISTRIBUTION:= {sles10 | rhel5 | el6}

     ARCHITECTURE:= {i386 | x86_64}

The COMPONENT can be `server' or `client'. (Other values are possible,
but since only the `server' and `client' components are required for a
working MySQL Cluster installation, we do not discuss them here.) The
PRODUCTTYPE for Community RPMs downloaded from
http://dev.mysql.com/downloads/cluster/ is always `gpl'; `advanced' is
used to indicate commercial releases.  NDBVERSION represents the
three-part `NDB' storage engine version number in 7.2.X format. The
DISTRIBUTION can be one of `sles11' (SUSE Enterprise Linux 11), `rhel5'
(Oracle Linux 5, Red Hat Enterprise Linux 4 and 5), or `el6' (Oracle
Linux 6, Red Hat Enterprise Linux 6) The ARCHITECTURE is `i386' for
32-bit RPMs and `x86_64' for 64-bit versions.

For a MySQL Cluster, one and possibly two RPMs are required:

   * The `server' RPM (for example,
     `MySQL-Cluster-server-gpl-7.2.14-1.sles11.i386.rpm'), which
     supplies the core files needed to run a MySQL Server with *Note
     `NDBCLUSTER': mysql-cluster. storage engine support (that is, as a
     MySQL Cluster SQL node) as well as all MySQL Cluster executables,
     including the management node, data node, and *Note `ndb_mgm':
     mysql-cluster-programs-ndb-mgm. client binaries. This RPM is
     always required for installing MySQL Cluster NDB 7.2.

   * If you do not have your own client application capable of
     administering a MySQL server, you should also obtain and install
     the `client' RPM (for example,
     `MySQL-Cluster-client-gpl-7.2.14-1.sles11.i386.rpm'), which
     supplies the *Note `mysql': mysql. client

The MySQL Cluster version number in the RPM file names (shown here as
`7.2.14') can vary according to the version which you are actually
using.  _It is very important that all of the Cluster RPMs to be
installed have the same version number_. The ARCHITECTURE designation
should be appropriate to the machine on which the RPM is to be
installed; in particular, you should keep in mind that 64-bit RPMs
cannot be used with 32-bit operating system.

Data nodes

On a computer that is to host a cluster data node it is necessary to
install only the `server' RPM.  To do so, copy this RPM to the data
node host, and run the following command as the system root user,
replacing the name shown for the RPM as necessary to match that of the
RPM downloaded from the MySQL web site:

     shell> rpm -Uhv MySQL-Cluster-server-gpl-7.2.14-1.sles11.i386.rpm

Although this installs all MySQL Cluster binaries, only the program
*Note `ndbd': mysql-cluster-programs-ndbd. or *Note `ndbmtd':
mysql-cluster-programs-ndbmtd.  (both in `/usr/sbin') is actually
needed to run a MySQL Cluster data node.

SQL nodes

On each machine to be used for hosting a cluster SQL node, install the
`server' RPM by executing the following command as the system root
user, replacing the name shown for the RPM as necessary to match the
name of the RPM downloaded from the MySQL web site:

     shell> rpm -Uhv MySQL-Cluster-server-gpl-7.2.14-1.sles11.i386.rpm

This installs the MySQL server binary (*Note `mysqld': mysqld.) with
*Note `NDB': mysql-cluster. storage engine support in the `/usr/sbin'
directory, as well as all needed MySQL Server support files. It also
installs the *Note `mysql.server': mysql-server. and *Note
`mysqld_safe': mysqld-safe. startup scripts (in `/usr/share/mysql' and
`/usr/bin', respectively). The RPM installer should take care of
general configuration issues (such as creating the `mysql' user and
group, if needed) automatically.

To administer the SQL node (MySQL server), you should also install the
`client' RPM, as shown here:

     shell> rpm -Uhv MySQL-Cluster-client-gpl-7.2.14-1.sles11.i386.rpm

This installs the *Note `mysql': mysql. client program.

Management nodes

To install the MySQL Cluster management server, it is necessary only to
use the `server' RPM. Copy this RPM to the computer intended to host
the management node, and then install it by running the following
command as the system root user (replace the name shown for the RPM as
necessary to match that of the `server' RPM downloaded from the MySQL
web site):

     shell> rpm -Uhv MySQL-Cluster-server-gpl-7.2.14-1.sles11.i386.rpm

Although this RPM installs many other files, only the management server
binary *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. (in the
`/usr/sbin' directory) is actually required for running a management
node. The `server' RPM also installs *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm, the *Note `NDB': mysql-cluster.
management client.

See *Note linux-installation-rpm::, for general information about
installing MySQL using RPMs supplied by Oracle.

After installing from RPM, you still need to configure the cluster as
discussed in *Note mysql-cluster-install-configuration::.

*Note*:

A number of RPMs used by MySQL Cluster NDB 7.1 were made obsolete and
discontinued in MySQL Cluster NDB 7.2. These include the former
`MySQL-Cluster-clusterj', `MySQL-Cluster-extra',
`MySQL-Cluster-management', `MySQL-Cluster-storage', and `MySQL
Cluster-tools' RPMs; all of these have been merged into the
`MySQL-Cluster-server' RPM. When upgrading from a MySQL Cluster NDB 7.1
RPM installation to MySQL Cluster NDB 7.2.3 or an earlier MySQL Cluster
NDB 7.2 release, it was necessary to remove these packages manually
before installing the MySQL Cluster NDB 7.2 `MySQL-Cluster-server' RPM.
This issue is fixed in MySQL Cluster NDB 7.2.4 and later, where the
`MySQL-Cluster-server' package specifically obsoletes the discontinued
packages (BUG #13545589).


File: manual.info,  Node: mysql-cluster-install-linux-source,  Prev: mysql-cluster-install-linux-rpm,  Up: mysql-cluster-install-linux

17.2.1.3 Building MySQL Cluster from Source on Linux
....................................................

This section provides information about compiling MySQL Clusteron Linux
and other Unix-like platforms. Building MySQL Cluster from source is
similar to building the standard MySQL Server, although it differs in a
few key respects discussed here. For general information about building
MySQL from source, see *Note source-installation::. For information
about compiling MySQL Cluster on Windows platforms, see *Note
mysql-cluster-install-windows-source::.

Building MySQL Cluster requires using the MySQL Cluster sources.  These
are available from the MySQL Cluster downloads page at
http://dev.mysql.com/downloads/cluster/. The archived source file
should have a name similar to `mysql-cluster-gpl-7.2.14.tar.gz'.  You
can also obtain MySQL development sources from launchpad.net.
Attempting to build MySQL Cluster from standard MySQL Server 5.5
sources is not supported.

The `WITH_NDBCLUSTER_STORAGE_ENGINE' option for `CMake' causes the
binaries for the management nodes, data nodes, and other MySQL Cluster
programs to be built; it also causes *Note `mysqld': mysqld. to be
compiled with *Note `NDB': mysql-cluster. storage engine support. This
option is enabled by default in the MySQL Cluster NDB 7.2 sources.

*Important*:

Beginning with MySQL Cluster NDB 7.2.9, the `WITH_NDB_JAVA' option is
enabled by default. This means that, by default, if `CMake' cannot find
the location of Java on your system, the configuration process fails;
if you do not wish to enable Java and ClusterJ support, you must
indicate this explicitly by configuring the build using
`-DWITH_NDB_JAVA=OFF'. (Bug #12379735) Use `WITH_CLASSPATH' to provide
the Java classpath if needed.

For more information about `CMake' options specific to building MySQL
Cluster, see Options for Compiling MySQL Cluster.

After you have run `make && make install' (or your system's
equivalent), the result is similar to what is obtained by unpacking a
precompiled binary to the same location.

Management nodes

When building from source and running the default `make install', the
management server and management client binaries (*Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd. and *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm.) can be found in
`/usr/local/mysql/bin'. Only *Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd. is required to be present on a
management node host; however, it is also a good idea to have *Note
`ndb_mgm': mysql-cluster-programs-ndb-mgm. present on the same host
machine.  Neither of these executables requires a specific location on
the host machine's file system.

Data nodes

The only executable required on a data node host is the data node
binary *Note `ndbd': mysql-cluster-programs-ndbd. or *Note `ndbmtd':
mysql-cluster-programs-ndbmtd. (*Note `mysqld': mysqld, for example,
does not have to be present on the host machine.) By default, when
building from source, this file is placed in the directory
`/usr/local/mysql/bin'. For installing on multiple data node hosts, only
*Note `ndbd': mysql-cluster-programs-ndbd. or *Note `ndbmtd':
mysql-cluster-programs-ndbmtd. need be copied to the other host machine
or machines. (This assumes that all data node hosts use the same
architecture and operating system; otherwise you may need to compile
separately for each different platform.) The data node binary need not
be in any particular location on the host's file system, as long as the
location is known.

When compiling MySQL Cluster from source, no special options are
required for building multi-threaded data node binaries.  Configuring
the build with *Note `NDB': mysql-cluster.  storage engine support
causes *Note `ndbmtd': mysql-cluster-programs-ndbmtd. to be built
automatically; `make install' places the *Note `ndbmtd':
mysql-cluster-programs-ndbmtd. binary in the installation `bin'
directory along with *Note `mysqld': mysqld, *Note `ndbd':
mysql-cluster-programs-ndbd, and *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm.

SQL nodes

If you compile MySQL with clustering support, and perform the default
installation (using `make install' as the system `root' user), *Note
`mysqld': mysqld. is placed in `/usr/local/mysql/bin'. Follow the steps
given in *Note source-installation:: to make *Note `mysqld': mysqld.
ready for use. If you want to run multiple SQL nodes, you can use a
copy of the same *Note `mysqld': mysqld. executable and its associated
support files on several machines. The easiest way to do this is to
copy the entire `/usr/local/mysql' directory and all directories and
files contained within it to the other SQL node host or hosts, then
repeat the steps from *Note source-installation:: on each machine. If
you configure the build with a nondefault `PREFIX' option, you must
adjust the directory accordingly.

In *Note mysql-cluster-install-configuration::, we create configuration
files for all of the nodes in our example MySQL Cluster.


File: manual.info,  Node: mysql-cluster-install-windows,  Next: mysql-cluster-install-configuration,  Prev: mysql-cluster-install-linux,  Up: mysql-cluster-installation

17.2.2 Installing MySQL Cluster on Windows
------------------------------------------

* Menu:

* mysql-cluster-install-windows-binary::  Installing MySQL Cluster on Windows from a Binary Release
* mysql-cluster-install-windows-source::  Compiling and Installing MySQL Cluster from Source on Windows
* mysql-cluster-install-windows-initial-start::  Initial Startup of MySQL Cluster on Windows
* mysql-cluster-install-windows-service::  Installing MySQL Cluster Processes as Windows Services

MySQL Cluster NDB 7.2 binaries for Windows can be obtained from
`http://dev.mysql.com/downloads/cluster/'. For information about
installing MySQL Cluster on Windows from a binary release provided by
Oracle, see *Note mysql-cluster-install-windows-binary::.

It is also possible to compile and install MySQL Cluster from source on
Windows using Microsoft Visual Studio. For more information, see *Note
mysql-cluster-install-windows-source::.


File: manual.info,  Node: mysql-cluster-install-windows-binary,  Next: mysql-cluster-install-windows-source,  Prev: mysql-cluster-install-windows,  Up: mysql-cluster-install-windows

17.2.2.1 Installing MySQL Cluster on Windows from a Binary Release
..................................................................

This section describes a basic installation of MySQL Cluster on Windows
using a binary `no-install' MySQL Cluster release provided by Oracle,
using the same 4-node setup outlined in the beginning of this section
(see *Note mysql-cluster-installation::), as shown in the following
table:

This table illustrates the same 4-node MySQL cluster configuration
outlined in the beginning of this section. The table lists the cluster
nodes and the IP address of each node.

Node                                 IP Address
Management (MGMD) node               192.168.0.10
MySQL server (SQL) node              192.168.0.20
Data (NDBD) node "A"                 192.168.0.30
Data (NDBD) node "B"                 192.168.0.40

As on other platforms, the MySQL Cluster host computer running an SQL
node must have installed on it a MySQL Server binary (*Note
`mysqld.exe': mysqld.). You should also have the MySQL client (*Note
`mysql.exe': mysql.) on on this host. For management nodes and data
nodes, it is not necessary to install the MySQL Server binary; however,
each management node requires the management server daemon (*Note
`ndb_mgmd.exe': mysql-cluster-programs-ndb-mgmd.); each data node
requires the data node daemon (*Note `ndbd.exe':
mysql-cluster-programs-ndbd. or *Note `ndbmtd.exe':
mysql-cluster-programs-ndbmtd.).  For this example, we refer to *Note
`ndbd.exe': mysql-cluster-programs-ndbd. as the data node executable,
but you can install *Note `ndbmtd.exe': mysql-cluster-programs-ndbmtd,
the multi-threaded version of this program, instead, in exactly the
same way. You should also install the management client (*Note
`ndb_mgm.exe': mysql-cluster-programs-ndb-mgm.)  on the management
server host. This section covers the steps necessary to install the
correct Windows binaries for each type of MySQL Cluster node.

*Note*:

As with other Windows programs, MySQL Cluster executables are named
with the `.exe' file extension.  However, it is not necessary to
include the `.exe' extension when invoking these programs from the
command line. Therefore, we often simply refer to these programs in
this documentation as *Note `mysqld': mysqld, *Note `mysql': mysql,
*Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd, and so on. You
should understand that, whether we refer (for example) to *Note
`mysqld': mysqld. or *Note `mysqld.exe': mysqld, either name means the
same thing (the MySQL Server program).

For setting up a MySQL Cluster using Oracles's `no-install' binaries,
the first step in the installation process is to download the latest
MySQL Cluster Windows binary archive from
`http://dev.mysql.com/downloads/cluster/'. This archive has a filename
of the form `mysql-cluster-gpl-noinstall-VER-winARCH.zip', where VER is
the `NDB' storage engine version (such as `7.2.1'), and ARCH is the
architecture (`32' for 32-bit binaries, and `64' for 64-bit binaries).
For example, the MySQL Cluster NDB 7.2.1 `no-install' archive for
32-bit Windows systems is named
`mysql-cluster-gpl-noinstall-7.2.1-win32.zip'.

You can run 32-bit MySQL Cluster binaries on both 32-bit and 64-bit
versions of Windows; however, 64-bit MySQL Cluster binaries can be used
only on 64-bit versions of Windows. If you are using a 32-bit version
of Windows on a computer that has a 64-bit CPU, then you must use the
32-bit MySQL Cluster binaries.

To minimize the number of files that need to be downloaded from the
Internet or copied between machines, we start with the computer where
you intend to run the SQL node.

SQL node

We assume that you have placed a copy of the `no-install' archive in
the directory `C:\Documents and Settings\USERNAME\My
Documents\Downloads' on the computer having the IP address
192.168.0.20, where USERNAME is the name of the current user. (You can
obtain this name using `ECHO %USERNAME%' on the command line.) To
install and run MySQL Cluster executables as Windows services, this user
should be a member of the `Administrators' group.

Extract all the files from the archive. The Extraction Wizard
integrated with Windows Explorer is adequate for this task. (If you use
a different archive program, be sure that it extracts all files and
directories from the archive, and that it preserves the archive's
directory structure.) When you are asked for a destination directory,
enter `C:\', which causes the Extraction Wizard to extract the archive
to the directory `C:\mysql-cluster-gpl-noinstall-VER-winARCH'.  Rename
this directory to `C:\mysql'.

It is possible to install the MySQL Cluster binaries to directories
other than `C:\mysql\bin'; however, if you do so, you must modify the
paths shown in this procedure accordingly. In particular, if the MySQL
Server (SQL node) binary is installed to a location other than
`C:\mysql' or `C:\Program Files\MySQL\MySQL Server 5.5', or if the SQL
node's data directory is in a location other than `C:\mysql\data' or
`C:\Program Files\MySQL\MySQL Server 5.5\data', extra configuration
options must be used on the command line or added to the `my.ini' or
`my.cnf' file when starting the SQL node. For more information about
configuring a MySQL Server to run in a nonstandard location, see *Note
windows-install-archive::.

For a MySQL Server with MySQL Cluster support to run as part of a MySQL
Cluster, it must be started with the options `--ndbcluster' and
`--ndb-connectstring'. While you can specify these options on the
command line, it is usually more convenient to place them in an option
file. To do this, create a new text file in Notepad or another text
editor. Enter the following configuration information into this file:

     [mysqld]
     # Options for mysqld process:
     ndbcluster                      # run NDB storage engine
     ndb-connectstring=192.168.0.10  # location of management server

You can add other options used by this MySQL Server if desired (see
*Note windows-create-option-file::), but the file must contain the
options shown, at a minimum. Save this file as `C:\mysql\my.ini'. This
completes the installation and setup for the SQL node.

Data nodes

A MySQL Cluster data node on a Windows host requires only a single
executable, one of either *Note `ndbd.exe': mysql-cluster-programs-ndbd.
or *Note `ndbmtd.exe': mysql-cluster-programs-ndbmtd. For this example,
we assume that you are using *Note `ndbd.exe':
mysql-cluster-programs-ndbd, but the same instructions apply when using
*Note `ndbmtd.exe': mysql-cluster-programs-ndbmtd.  On each computer
where you wish to run a data node (the computers having the IP
addresses 192.168.0.30 and 192.168.0.40), create the directories
`C:\mysql', `C:\mysql\bin', and `C:\mysql\cluster-data'; then, on the
computer where you downloaded and extracted the `no-install' archive,
locate `ndbd.exe' in the `C:\mysql\bin' directory. Copy this file to
the `C:\mysql\bin' directory on each of the two data node hosts.

To function as part of a MySQL Cluster, each data node must be given
the address or hostname of the management server. You can supply this
information on the command line using the `--ndb-connectstring' or `-c'
option when starting each data node process.  However, it is usually
preferable to put this information in an option file. To do this,
create a new text file in Notepad or another text editor and enter the
following text:

     [mysql_cluster]
     # Options for data node process:
     ndb-connectstring=192.168.0.10  # location of management server

Save this file as `C:\mysql\my.ini' on the data node host. Create
another text file containing the same information and save it on as
`C:mysql\my.ini' on the other data node host, or copy the my.ini file
from the first data node host to the second one, making sure to place
the copy in the second data node's `C:\mysql' directory. Both data node
hosts are now ready to be used in the MySQL Cluster, which leaves only
the management node to be installed and configured.

Management node

The only executable program required on a computer used for hosting a
MySQL Cluster management node is the management server program *Note
`ndb_mgmd.exe': mysql-cluster-programs-ndb-mgmd. However, in order to
administer the MySQL Cluster once it has been started, you should also
install the MySQL Cluster management client program *Note
`ndb_mgm.exe': mysql-cluster-programs-ndb-mgm. on the same machine as
the management server. Locate these two programs on the machine where
you downloaded and extracted the `no-install' archive; this should be
the directory `C:\mysql\bin' on the SQL node host. Create the directory
`C:\mysql\bin' on the computer having the IP address 192.168.0.10, then
copy both programs to this directory.

You should now create two configuration files for use by `ndb_mgmd.exe':

  1. A local configuration file to supply configuration data specific
     to the management node itself. Typically, this file needs only to
     supply the location of the MySQL Cluster global configuration file
     (see item 2).

     To create this file, start a new text file in Notepad or another
     text editor, and enter the following information:

          [mysql_cluster]
          # Options for management node process
          config-file=C:/mysql/bin/config.ini

     Save this file as the plaintext file `C:\mysql\bin\my.ini'.

  2. A global configuration file from which the management node can
     obtain configuration information governing the MySQL Cluster as a
     whole. At a minimum, this file must contain a section for each
     node in the MySQL Cluster, and the IP addresses or hostnames for
     the management node and all data nodes (`HostName' configuration
     parameter).  It is also advisable to include the following
     additional information:

        * The IP address or hostname of any SQL nodes

        * The data memory and index memory allocated to each data node
          (`DataMemory' and `IndexMemory' configuration parameters)

        * The number of replicas, using the `NoOfReplicas'
          configuration parameter (see *Note
          mysql-cluster-nodes-groups::)

        * The directory where each data node stores it data and log
          file, and the directory where the management node keeps its
          log files (in both cases, the `DataDir' configuration
          parameter)

     Create a new text file using a text editor such as Notepad, and
     input the following information:

          [ndbd default]
          # Options affecting ndbd processes on all data nodes:
          NoOfReplicas=2                      # Number of replicas
          DataDir=C:/mysql/bin/cluster-data   # Directory for each data node's data files
                                              # Forward slashes used in directory path,
                                              # rather than backslashes. This is correct;
                                              # see *Important* note in text
          DataMemory=80M    # Memory allocated to data storage
          IndexMemory=18M   # Memory allocated to index storage
                            # For DataMemory and IndexMemory, we have used the
                            # default values. Since the "world" database takes up
                            # only about 500KB, this should be more than enough for
                            # this example Cluster setup.

          [ndb_mgmd]
          # Management process options:
          HostName=192.168.0.10               # Hostname or IP address of management node
          DataDir=C:/mysql/bin/cluster-logs   # Directory for management node log files

          [ndbd]
          # Options for data node "A":
                                          # (one [ndbd] section per data node)
          HostName=192.168.0.30           # Hostname or IP address

          [ndbd]
          # Options for data node "B":
          HostName=192.168.0.40           # Hostname or IP address

          [mysqld]
          # SQL node options:
          HostName=192.168.0.20           # Hostname or IP address

     Save this file as the plaintext file `C:\mysql\bin\config.ini'.

*Important*:

A single backslash character (`\') cannot be used when specifying
directory paths in program options or configuration files used by MySQL
Cluster on Windows. Instead, you must either escape each backslash
character with a second backslash (`\\'), or replace the backslash with
a forward slash character (`/'). For example, the following line from
the `[ndb_mgmd]' section of a MySQL Cluster `config.ini' file does not
work:

     DataDir=C:\mysql\bin\cluster-logs

Instead, you may use either of the following:

     DataDir=C:\\mysql\\bin\\cluster-logs  # Escaped backslashes

     DataDir=C:/mysql/bin/cluster-logs     # Forward slashes

For reasons of brevity and legibility, we recommend that you use
forward slashes in directory paths used in MySQL Cluster program
options and configuration files on Windows.


File: manual.info,  Node: mysql-cluster-install-windows-source,  Next: mysql-cluster-install-windows-initial-start,  Prev: mysql-cluster-install-windows-binary,  Up: mysql-cluster-install-windows

17.2.2.2 Compiling and Installing MySQL Cluster from Source on Windows
......................................................................

Oracle provides precompiled MySQL Cluster binaries for Windows which
should be adequate for most users. However, if you wish, it is also
possible to compile MySQL Cluster for Windows from source code. The
procedure for doing this is almost identical to the procedure used to
compile the standard MySQL Server binaries for Windows, and uses the
same tools. However, there are two major differences:

   * To build MySQL Cluster, you must use the MySQL Cluster sources,
     which you can obtain from
     `http://dev.mysql.com/downloads/cluster/'.

     Attempting to build MySQL Cluster from the source code for the
     standard MySQL Server is likely not to be successful, and is not
     supported by Oracle.

   * You must configure the build using the
     `WITH_NDBCLUSTER_STORAGE_ENGINE' or `WITH_NDBCLUSTER' option in
     addition to any other build options you wish to use with `CMake'.
     (`WITH_NDBCLUSTER' is supported as an alias for
     `WITH_NDBCLUSTER_STORAGE_ENGINE', and works in exactly the same
     way.)

*Important*:

Beginning with MySQL Cluster NDB 7.2.9, the `WITH_NDB_JAVA' option is
enabled by default. This means that, by default, if `CMake' cannot find
the location of Java on your system, the configuration process fails;
if you do not wish to enable Java and ClusterJ support, you must
indicate this explicitly by configuring the build using
`-DWITH_NDB_JAVA=OFF'. (Bug #12379735) Use `WITH_CLASSPATH' to provide
the Java classpath if needed.

For more information about `CMake' options specific to building MySQL
Cluster, see Options for Compiling MySQL Cluster.

Once the build process is complete, you can create a Zip archive
containing the compiled binaries; *Note
installing-source-distribution:: provides the commands needed to
perform this task on Windows systems. The MySQL Cluster binaries can be
found in the `bin' directory of the resulting archive, which is
equivalent to the `no-install' archive, and which can be installed and
configured in the same manner. For more information, see *Note
mysql-cluster-install-windows-binary::.


File: manual.info,  Node: mysql-cluster-install-windows-initial-start,  Next: mysql-cluster-install-windows-service,  Prev: mysql-cluster-install-windows-source,  Up: mysql-cluster-install-windows

17.2.2.3 Initial Startup of MySQL Cluster on Windows
....................................................

Once the MySQL Cluster executables and needed configuration files are
in place, performing an initial start of the cluster is simply a matter
of starting the MySQL Cluster executables for all nodes in the cluster.
Each cluster node process must be started separately, and on the host
computer where it resides.  The management node should be started
first, followed by the data nodes, and then finally by any SQL nodes.

  1. On the management node host, issue the following command from the
     command line to start the management node process:

          C:\mysql\bin> ndb_mgmd
          2010-06-23 07:53:34 [MgmtSrvr] INFO -- NDB Cluster Management Server. mysql-5.5.33-ndb-7.2.14
          2010-06-23 07:53:34 [MgmtSrvr] INFO -- Reading cluster configuration from 'config.ini'

     The management node process continues to print logging output to
     the console. This is normal, because the management node is not
     running as a Windows service. (If you have used MySQL Cluster on a
     Unix-like platform such as Linux, you may notice that the
     management node's default behavior in this regard on Windows is
     effectively the opposite of its behavior on Unix systems, where it
     runs by default as a Unix daemon process. This behavior is also
     true of MySQL Cluster data node processes running on Windows.) For
     this reason, do not close the window in which *Note
     `ndb_mgmd.exe': mysql-cluster-programs-ndb-mgmd. is running; doing
     so kills the management node process. (See *Note
     mysql-cluster-install-windows-service::, where we show how to
     install and run MySQL Cluster processes as Windows services.)

     The required `-f' option tells the management node where to find
     the global configuration file (`config.ini'). The long form of this
     option is `--config-file'.

     *Important*:

     A MySQL Cluster management node caches the configuration data that
     it reads from `config.ini'; once it has created a configuration
     cache, it ignores the `config.ini' file on subsequent starts
     unless forced to do otherwise. This means that, if the management
     node fails to start due to an error in this file, you must make
     the management node re-read `config.ini' after you have corrected
     any errors in it. You can do this by starting *Note
     `ndb_mgmd.exe': mysql-cluster-programs-ndb-mgmd. with the
     `--reload' or `--initial' option on the command line. Either of
     these options works to refresh the configuration cache.

     It is not necessary or advisable to use either of these options in
     the management node's `my.ini' file.

     For additional information about options which can be used with
     *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd, see *Note
     mysql-cluster-programs-ndb-mgmd::, as well as *Note
     mysql-cluster-program-options-common::.

  2. On each of the data node hosts, run the command shown here to
     start the data node processes:

          C:\mysql\bin> ndbd
          2010-06-23 07:53:46 [ndbd] INFO -- Configuration fetched from 'localhost:1186', generation: 1

     In each case, the first line of output from the data node process
     should resemble what is shown in the preceding example, and is
     followed by additional lines of logging output. As with the
     management node process, this is normal, because the data node is
     not running as a Windows service.  For this reason, do not close
     the console window in which the data node process is running;
     doing so kills *Note `ndbd.exe': mysql-cluster-programs-ndbd. (For
     more information, see *Note
     mysql-cluster-install-windows-service::.)

  3. Do not start the SQL node yet; it cannot connect to the cluster
     until the data nodes have finished starting, which may take some
     time. Instead, in a new console window on the management node
     host, start the MySQL Cluster management client *Note
     `ndb_mgm.exe': mysql-cluster-programs-ndb-mgm, which should be in
     `C:\mysql\bin' on the management node host. (Do not try to re-use
     the console window where *Note `ndb_mgmd.exe':
     mysql-cluster-programs-ndb-mgmd. is running by typing `CTRL'+`C',
     as this kills the management node.) The resulting output should
     look like this:

          C:\mysql\bin> ndb_mgm
          -- NDB Cluster -- Management Client --
          ndb_mgm>

     When the prompt `ndb_mgm>' appears, this indicates that the
     management client is ready to receive MySQL Cluster management
     commands. You can observe the status of the data nodes as they
     start by entering `ALL STATUS' at the management client prompt.
     This command causes a running report of the data nodes's startup
     sequence, which should look something like this:

          ndb_mgm> ALL STATUS
          Connected to Management Server at: localhost:1186
          Node 2: starting (Last completed phase 3) (mysql-5.5.33-ndb-7.2.14)
          Node 3: starting (Last completed phase 3) (mysql-5.5.33-ndb-7.2.14)

          Node 2: starting (Last completed phase 4) (mysql-5.5.33-ndb-7.2.14)
          Node 3: starting (Last completed phase 4) (mysql-5.5.33-ndb-7.2.14)

          Node 2: Started (version 7.2.14)
          Node 3: Started (version 7.2.14)

          ndb_mgm>

     *Note*:

     Commands issued in the management client are not case-sensitive;
     we use uppercase as the canonical form of these commands, but you
     are not required to observe this convention when inputting them
     into the *Note `ndb_mgm': mysql-cluster-programs-ndb-mgm. client.
     For more information, see *Note
     mysql-cluster-mgm-client-commands::.

     The output produced by `ALL STATUS' is likely to vary from what is
     shown here, according to the speed at which the data nodes are
     able to start, the release version number of the MySQL Cluster
     software you are using, and other factors. What is significant is
     that, when you see that both data nodes have started, you are
     ready to start the SQL node.

     You can leave *Note `ndb_mgm.exe': mysql-cluster-programs-ndb-mgm.
     running; it has no negative impact on the performance of the MySQL
     Cluster, and we use it in the next step to verify that the SQL node
     is connected to the cluster after you have started it.

  4. On the computer designated as the SQL node host, open a console
     window and navigate to the directory where you unpacked the MySQL
     Cluster binaries (if you are following our example, this is
     `C:\mysql\bin').

     Start the SQL node by invoking *Note `mysqld.exe': mysqld.  from
     the command line, as shown here:

          C:\mysql\bin> mysqld --console

     The `--console' option causes logging information to be written to
     the console, which can be helpful in the event of problems. (Once
     you are satisfied that the SQL node is running in a satisfactory
     manner, you can stop it and restart it out without the `--console'
     option, so that logging is performed normally.)

     In the console window where the management client (*Note
     `ndb_mgm.exe': mysql-cluster-programs-ndb-mgm.) is running on the
     management node host, enter the `SHOW' command, which should
     produce output similar to what is shown here:

          ndb_mgm> SHOW
          Connected to Management Server at: localhost:1186
          Cluster Configuration
          ---------------------
          [ndbd(NDB)]     2 node(s)
          id=2    @192.168.0.30  (Version: 5.5.33-ndb-7.2.14, Nodegroup: 0, Master)
          id=3    @192.168.0.40  (Version: 5.5.33-ndb-7.2.14, Nodegroup: 0)

          [ndb_mgmd(MGM)] 1 node(s)
          id=1    @192.168.0.10  (Version: 5.5.33-ndb-7.2.14)

          [mysqld(API)]   1 node(s)
          id=4    @192.168.0.20  (Version: 5.5.33-ndb-7.2.14)

     You can also verify that the SQL node is connected to the MySQL
     Cluster in the *Note `mysql': mysql. client (*Note `mysql.exe':
     mysql.) using the `SHOW ENGINE NDB STATUS' statement.

You should now be ready to work with database objects and data using
MySQL Cluster's *Note `NDBCLUSTER': mysql-cluster. storage engine. See
*Note mysql-cluster-install-example-data::, for more information and
examples.

You can also install *Note `ndb_mgmd.exe':
mysql-cluster-programs-ndb-mgmd, *Note `ndbd.exe':
mysql-cluster-programs-ndbd, and *Note `ndbmtd.exe':
mysql-cluster-programs-ndbmtd.  as Windows services. For information on
how to do this, see *Note mysql-cluster-install-windows-service::).


File: manual.info,  Node: mysql-cluster-install-windows-service,  Prev: mysql-cluster-install-windows-initial-start,  Up: mysql-cluster-install-windows

17.2.2.4 Installing MySQL Cluster Processes as Windows Services
...............................................................

Once you are satisfied that MySQL Cluster is running as desired, you
can install the management nodes and data nodes as Windows services, so
that these processes are started and stopped automatically whenever
Windows is started or stopped. This also makes it possible to control
these processes from the command line with the appropriate `NET START'
or `NET STOP' command, or using the Windows graphical `Services'
utility.

Installing programs as Windows services usually must be done using an
account that has Administrator rights on the system.

To install the management node as a service on Windows, invoke *Note
`ndb_mgmd.exe': mysql-cluster-programs-ndb-mgmd. from the command line
on the machine hosting the management node, using the `--install'
option, as shown here:

     C:\> C:\mysql\bin\ndb_mgmd.exe --install
     Installing service 'MySQL Cluster Management Server'
       as '"C:\mysql\bin\ndbd.exe" "--service=ndb_mgmd"'
     Service successfully installed.

*Important*:

When installing a MySQL Cluster program as a Windows service, you
should always specify the complete path; otherwise the service
installation may fail with the error `The system cannot find the file
specified'.

The `--install' option must be used first, ahead of any other options
that might be specified for *Note `ndb_mgmd.exe':
mysql-cluster-programs-ndb-mgmd. However, it is preferable to specify
such options in an options file instead. If your options file is not in
one of the default locations as shown in the output of *Note
`ndb_mgmd.exe': mysql-cluster-programs-ndb-mgmd.  `--help', you can
specify the location using the `--config-file' option.

Now you should be able to start and stop the management server like
this:

     C:\> NET START ndb_mgmd
     The MySQL Cluster Management Server service is starting.
     The MySQL Cluster Management Server service was started successfully.

     C:\> NET STOP ndb_mgmd
     The MySQL Cluster Management Server service is stopping..
     The MySQL Cluster Management Server service was stopped successfully.

You can also start or stop the management server as a Windows service
using the descriptive name, as shown here:

     C:\> NET START 'MySQL Cluster Management Server'
     The MySQL Cluster Management Server service is starting.
     The MySQL Cluster Management Server service was started successfully.

     C:\> NET STOP  'MySQL Cluster Management Server'
     The MySQL Cluster Management Server service is stopping..
     The MySQL Cluster Management Server service was stopped successfully.

However, it is usually simpler to specify a short service name or to
permit the default service name to be used when installing the service,
and then reference that name when starting or stopping the service. To
specify a service name other than `ndb_mgmd', append it to the
`--install' option, as shown in this example:

     C:\> C:\mysql\bin\ndb_mgmd.exe --install=mgmd1
     Installing service 'MySQL Cluster Management Server'
       as '"C:\mysql\bin\ndb_mgmd.exe" "--service=mgmd1"'
     Service successfully installed.

Now you should be able to start or stop the service using the name you
have specified, like this:

     C:\> NET START mgmd1
     The MySQL Cluster Management Server service is starting.
     The MySQL Cluster Management Server service was started successfully.

     C:\> NET STOP mgmd1
     The MySQL Cluster Management Server service is stopping..
     The MySQL Cluster Management Server service was stopped successfully.

To remove the management node service, invoke *Note `ndb_mgmd.exe':
mysql-cluster-programs-ndb-mgmd. with the `--remove' option, as shown
here:

     C:\> C:\mysql\bin\ndb_mgmd.exe --remove
     Removing service 'MySQL Cluster Management Server'
     Service successfully removed.

If you installed the service using a service name other than the
default, you can remove the service by passing this name as the value
of the `--remove' option, like this:

     C:\> C:\mysql\bin\ndb_mgmd.exe --remove=mgmd1
     Removing service 'mgmd1'
     Service successfully removed.

Installation of a MySQL Cluster data node process as a Windows service
can be done in a similar fashion, using the `--install' option for
*Note `ndbd.exe': mysql-cluster-programs-ndbd. (or *Note `ndbmtd.exe':
mysql-cluster-programs-ndbmtd.), as shown here:

     C:\> C:\mysql\bin\ndbd.exe --install
     Installing service 'MySQL Cluster Data Node Daemon' as '"C:\mysql\bin\ndbd.exe" "--service=ndbd"'
     Service successfully installed.

Now you can start or stop the data node using either the default
service name or the descriptive name with `net start' or `net stop', as
shown in the following example:

     C:\> NET START ndbd
     The MySQL Cluster Data Node Daemon service is starting.
     The MySQL Cluster Data Node Daemon service was started successfully.

     C:\> NET STOP ndbd
     The MySQL Cluster Data Node Daemon service is stopping..
     The MySQL Cluster Data Node Daemon service was stopped successfully.

     C:\> NET START 'MySQL Cluster Data Node Daemon'
     The MySQL Cluster Data Node Daemon service is starting.
     The MySQL Cluster Data Node Daemon service was started successfully.

     C:\> NET STOP 'MySQL Cluster Data Node Daemon'
     The MySQL Cluster Data Node Daemon service is stopping..
     The MySQL Cluster Data Node Daemon service was stopped successfully.

To remove the data node service, invoke *Note `ndbd.exe':
mysql-cluster-programs-ndbd. with the `--remove' option, as shown here:

     C:\> C:\mysql\bin\ndbd.exe --remove
     Removing service 'MySQL Cluster Data Node Daemon'
     Service successfully removed.

As with *Note `ndb_mgmd.exe': mysql-cluster-programs-ndb-mgmd. (and
*Note `mysqld.exe': mysqld.), when installing *Note `ndbd.exe':
mysql-cluster-programs-ndbd. as a Windows service, you can also specify
a name for the service as the value of `--install', and then use it when
starting or stopping the service, like this:

     C:\> C:\mysql\bin\ndbd.exe --install=dnode1
     Installing service 'dnode1' as '"C:\mysql\bin\ndbd.exe" "--service=dnode1"'
     Service successfully installed.

     C:\> NET START dnode1
     The MySQL Cluster Data Node Daemon service is starting.
     The MySQL Cluster Data Node Daemon service was started successfully.

     C:\> NET STOP dnode1
     The MySQL Cluster Data Node Daemon service is stopping..
     The MySQL Cluster Data Node Daemon service was stopped successfully.

If you specified a service name when installing the data node service,
you can use this name when removing it as well, by passing it as the
value of the `--remove' option, as shown here:

     C:\> C:\mysql\bin\ndbd.exe --remove=dnode1
     Removing service 'dnode1'
     Service successfully removed.

Installation of the SQL node as a Windows service, starting the
service, stopping the service, and removing the service are done in a
similar fashion, using *Note `mysqld': mysqld.  `--install', `NET
START', `NET STOP', and *Note `mysqld': mysqld.  `--remove'. For
additional information, see *Note windows-start-service::.


File: manual.info,  Node: mysql-cluster-install-configuration,  Next: mysql-cluster-install-first-start,  Prev: mysql-cluster-install-windows,  Up: mysql-cluster-installation

17.2.3 Initial Configuration of MySQL Cluster
---------------------------------------------

For our four-node, four-host MySQL Cluster, it is necessary to write
four configuration files, one per node host.

   * Each data node or SQL node requires a `my.cnf' file that provides
     two pieces of information: a _connection string_ that tells the
     node where to find the management node, and a line telling the
     MySQL server on this host (the machine hosting the data node) to
     enable the *Note `NDBCLUSTER': mysql-cluster. storage engine.

     For more information on connection strings, see *Note
     mysql-cluster-connection-strings::.

   * The management node needs a `config.ini' file telling it how many
     replicas to maintain, how much memory to allocate for data and
     indexes on each data node, where to find the data nodes, where to
     save data to disk on each data node, and where to find any SQL
     nodes.

Configuring the data nodes and SQL nodes

The `my.cnf' file needed for the data nodes is fairly simple. The
configuration file should be located in the `/etc' directory and can be
edited using any text editor. (Create the file if it does not exist.)
For example:

     shell> vi /etc/my.cnf

*Note*:

We show `vi' being used here to create the file, but any text editor
should work just as well.

For each data node and SQL node in our example setup, `my.cnf' should
look like this:

     [mysqld]
     # Options for mysqld process:
     ndbcluster                      # run NDB storage engine

     [mysql_cluster]
     # Options for MySQL Cluster processes:
     ndb-connectstring=192.168.0.10  # location of management server

After entering the preceding information, save this file and exit the
text editor. Do this for the machines hosting data node `A', data node
`B', and the SQL node.

*Important*:

Once you have started a *Note `mysqld': mysqld. process with the
`ndbcluster' and `ndb-connectstring' parameters in the `[mysqld]' and
`[mysql_cluster]' sections of the `my.cnf' file as shown previously,
you cannot execute any *Note `CREATE TABLE': create-table. or *Note
`ALTER TABLE': alter-table. statements without having actually started
the cluster. Otherwise, these statements will fail with an error. This
is by design.

Configuring the management node

The first step in configuring the management node is to create the
directory in which the configuration file can be found and then to
create the file itself. For example (running as `root'):

     shell> mkdir /var/lib/mysql-cluster
     shell> cd /var/lib/mysql-cluster
     shell> vi config.ini

For our representative setup, the `config.ini' file should read as
follows:

     [ndbd default]
     # Options affecting ndbd processes on all data nodes:
     NoOfReplicas=2    # Number of replicas
     DataMemory=80M    # How much memory to allocate for data storage
     IndexMemory=18M   # How much memory to allocate for index storage
                       # For DataMemory and IndexMemory, we have used the
                       # default values. Since the "world" database takes up
                       # only about 500KB, this should be more than enough for
                       # this example Cluster setup.

     [tcp default]
     # TCP/IP options:
     portnumber=2202   # This the default; however, you can use any
                       # port that is free for all the hosts in the cluster
                       # Note: It is recommended that you do not specify the port
                       # number at all and simply allow the default value to be used
                       # instead

     [ndb_mgmd]
     # Management process options:
     hostname=192.168.0.10           # Hostname or IP address of MGM node
     datadir=/var/lib/mysql-cluster  # Directory for MGM node log files

     [ndbd]
     # Options for data node "A":
                                     # (one [ndbd] section per data node)
     hostname=192.168.0.30           # Hostname or IP address
     datadir=/usr/local/mysql/data   # Directory for this data node's data files

     [ndbd]
     # Options for data node "B":
     hostname=192.168.0.40           # Hostname or IP address
     datadir=/usr/local/mysql/data   # Directory for this data node's data files

     [mysqld]
     # SQL node options:
     hostname=192.168.0.20           # Hostname or IP address
                                     # (additional mysqld connections can be
                                     # specified for this node for various
                                     # purposes such as running ndb_restore)

*Note*:

The `world' database can be downloaded from
`http://dev.mysql.com/doc/', where it can be found listed under
`Examples'.

After all the configuration files have been created and these minimal
options have been specified, you are ready to proceed with starting the
cluster and verifying that all processes are running.  We discuss how
this is done in *Note mysql-cluster-install-first-start::.

For more detailed information about the available MySQL Cluster
configuration parameters and their uses, see *Note
mysql-cluster-config-file::, and *Note mysql-cluster-configuration::.
For configuration of MySQL Cluster as relates to making backups, see
*Note mysql-cluster-backup-configuration::.

*Note*:

The default port for Cluster management nodes is 1186; the default port
for data nodes is 2202. However, the cluster can automatically allocate
ports for data nodes from those that are already free.


File: manual.info,  Node: mysql-cluster-install-first-start,  Next: mysql-cluster-install-example-data,  Prev: mysql-cluster-install-configuration,  Up: mysql-cluster-installation

17.2.4 Initial Startup of MySQL Cluster
---------------------------------------

Starting the cluster is not very difficult after it has been
configured. Each cluster node process must be started separately, and
on the host where it resides. The management node should be started
first, followed by the data nodes, and then finally by any SQL nodes:

  1. On the management host, issue the following command from the
     system shell to start the management node process:

          shell> ndb_mgmd -f /var/lib/mysql-cluster/config.ini

     The first time that it is started, *Note `ndb_mgmd':
     mysql-cluster-programs-ndb-mgmd.  must be told where to find its
     configuration file, using the `-f' or `--config-file' option. (See
     *Note mysql-cluster-programs-ndb-mgmd::, for details.)

     For additional options which can be used with *Note `ndb_mgmd':
     mysql-cluster-programs-ndb-mgmd, see *Note
     mysql-cluster-program-options-common::.

  2. On each of the data node hosts, run this command to start the
     *Note `ndbd': mysql-cluster-programs-ndbd. process:

          shell> ndbd

  3. If you used RPM files to install MySQL on the cluster host where
     the SQL node is to reside, you can (and should) use the supplied
     startup script to start the MySQL server process on the SQL node.

If all has gone well, and the cluster has been set up correctly, the
cluster should now be operational. You can test this by invoking the
*Note `ndb_mgm': mysql-cluster-programs-ndb-mgm. management node client.
The output should look like that shown here, although you might see
some slight differences in the output depending upon the exact version
of MySQL that you are using:

     shell> ndb_mgm
     -- NDB Cluster -- Management Client --
     ndb_mgm> SHOW
     Connected to Management Server at: localhost:1186
     Cluster Configuration
     ---------------------
     [ndbd(NDB)]     2 node(s)
     id=2    @192.168.0.30  (Version: 5.5.33-ndb-7.2.14, Nodegroup: 0, Master)
     id=3    @192.168.0.40  (Version: 5.5.33-ndb-7.2.14, Nodegroup: 0)

     [ndb_mgmd(MGM)] 1 node(s)
     id=1    @192.168.0.10  (Version: 5.5.33-ndb-7.2.14)

     [mysqld(API)]   1 node(s)
     id=4    @192.168.0.20  (Version: 5.5.33-ndb-7.2.14)

The SQL node is referenced here as `[mysqld(API)]', which reflects the
fact that the *Note `mysqld': mysqld. process is acting as a MySQL
Cluster API node.

*Note*:

The IP address shown for a given MySQL Cluster SQL or other API node in
the output of `SHOW' is the address used by the SQL or API node to
connect to the cluster data nodes, and not to any management node.

You should now be ready to work with databases, tables, and data in
MySQL Cluster. See *Note mysql-cluster-install-example-data::, for a
brief discussion.


File: manual.info,  Node: mysql-cluster-install-example-data,  Next: mysql-cluster-install-shutdown-restart,  Prev: mysql-cluster-install-first-start,  Up: mysql-cluster-installation

17.2.5 MySQL Cluster Example with Tables and Data
-------------------------------------------------

*Note*:

The information in this section applies to MySQL Cluster running on
both Unix and Windows platforms.

Working with database tables and data in MySQL Cluster is not much
different from doing so in standard MySQL. There are two key points to
keep in mind:

   * For a table to be replicated in the cluster, it must use the *Note
     `NDBCLUSTER': mysql-cluster. storage engine. To specify this, use
     the `ENGINE=NDBCLUSTER' or `ENGINE=NDB' option when creating the
     table:

          CREATE TABLE TBL_NAME (COL_NAME COLUMN_DEFINITIONS) ENGINE=NDBCLUSTER;

     Alternatively, for an existing table that uses a different storage
     engine, use *Note `ALTER TABLE': alter-table.  to change the table
     to use *Note `NDBCLUSTER': mysql-cluster.:

          ALTER TABLE TBL_NAME ENGINE=NDBCLUSTER;

   * Every *Note `NDBCLUSTER': mysql-cluster. table has a primary key.
     If no primary key is defined by the user when a table is created,
     the *Note `NDBCLUSTER': mysql-cluster.  storage engine
     automatically generates a hidden one. Such a key takes up space
     just as does any other table index. (It is not uncommon to
     encounter problems due to insufficient memory for accommodating
     these automatically created indexes.)

If you are importing tables from an existing database using the output
of *Note `mysqldump': mysqldump, you can open the SQL script in a text
editor and add the `ENGINE' option to any table creation statements, or
replace any existing `ENGINE' options. Suppose that you have the
`world' sample database on another MySQL server that does not support
MySQL Cluster, and you want to export the `City' table:

     shell> mysqldump --add-drop-table world City > city_table.sql

The resulting `city_table.sql' file will contain this table creation
statement (and the *Note `INSERT': insert. statements necessary to
import the table data):

     DROP TABLE IF EXISTS `City`;
     CREATE TABLE `City` (
       `ID` int(11) NOT NULL auto_increment,
       `Name` char(35) NOT NULL default '',
       `CountryCode` char(3) NOT NULL default '',
       `District` char(20) NOT NULL default '',
       `Population` int(11) NOT NULL default '0',
       PRIMARY KEY  (`ID`)
     ) ENGINE=MyISAM DEFAULT CHARSET=latin1;

     INSERT INTO `City` VALUES (1,'Kabul','AFG','Kabol',1780000);
     INSERT INTO `City` VALUES (2,'Qandahar','AFG','Qandahar',237500);
     INSERT INTO `City` VALUES (3,'Herat','AFG','Herat',186800);(REMAINING INSERT STATEMENTS OMITTED)

You need to make sure that MySQL uses the *Note `NDBCLUSTER':
mysql-cluster. storage engine for this table. There are two ways that
this can be accomplished. One of these is to modify the table definition
_before_ importing it into the Cluster database. Using the `City' table
as an example, modify the `ENGINE' option of the definition as follows:

     DROP TABLE IF EXISTS `City`;
     CREATE TABLE `City` (
       `ID` int(11) NOT NULL auto_increment,
       `Name` char(35) NOT NULL default '',
       `CountryCode` char(3) NOT NULL default '',
       `District` char(20) NOT NULL default '',
       `Population` int(11) NOT NULL default '0',
       PRIMARY KEY  (`ID`)
     ) *ENGINE=NDBCLUSTER* DEFAULT CHARSET=latin1;

     INSERT INTO `City` VALUES (1,'Kabul','AFG','Kabol',1780000);
     INSERT INTO `City` VALUES (2,'Qandahar','AFG','Qandahar',237500);
     INSERT INTO `City` VALUES (3,'Herat','AFG','Herat',186800);
     (REMAINING INSERT STATEMENTS OMITTED)

This must be done for the definition of each table that is to be part
of the clustered database. The easiest way to accomplish this is to do
a search-and-replace on the file that contains the definitions and
replace all instances of `TYPE=ENGINE_NAME' or `ENGINE=ENGINE_NAME'
with `ENGINE=NDBCLUSTER'. If you do not want to modify the file, you
can use the unmodified file to create the tables, and then use *Note
`ALTER TABLE': alter-table. to change their storage engine. The
particulars are given later in this section.

Assuming that you have already created a database named `world' on the
SQL node of the cluster, you can then use the *Note `mysql': mysql.
command-line client to read `city_table.sql', and create and populate
the corresponding table in the usual manner:

     shell> mysql world < city_table.sql

It is very important to keep in mind that the preceding command must be
executed on the host where the SQL node is running (in this case, on
the machine with the IP address `192.168.0.20').

To create a copy of the entire `world' database on the SQL node, use
*Note `mysqldump': mysqldump. on the noncluster server to export the
database to a file named `world.sql'; for example, in the `/tmp'
directory. Then modify the table definitions as just described and
import the file into the SQL node of the cluster like this:

     shell> mysql world < /tmp/world.sql

If you save the file to a different location, adjust the preceding
instructions accordingly.

Running *Note `SELECT': select. queries on the SQL node is no different
from running them on any other instance of a MySQL server. To run
queries from the command line, you first need to log in to the MySQL
Monitor in the usual way (specify the `root' password at the `Enter
password:' prompt):

     shell> mysql -u root -p
     Enter password:
     Welcome to the MySQL monitor.  Commands end with ; or \g.
     Your MySQL connection id is 1 to server version: 5.5.33-ndb-7.2.14

     Type 'help;' or '\h' for help. Type '\c' to clear the buffer.

     mysql>

We simply use the MySQL server's `root' account and assume that you
have followed the standard security precautions for installing a MySQL
server, including setting a strong `root' password. For more
information, see *Note default-privileges::.

It is worth taking into account that Cluster nodes do _not_ make use of
the MySQL privilege system when accessing one another. Setting or
changing MySQL user accounts (including the `root' account) effects
only applications that access the SQL node, not interaction between
nodes. See *Note mysql-cluster-security-mysql-privileges::, for more
information.

If you did not modify the `ENGINE' clauses in the table definitions
prior to importing the SQL script, you should run the following
statements at this point:

     mysql> USE world;
     mysql> ALTER TABLE City ENGINE=NDBCLUSTER;
     mysql> ALTER TABLE Country ENGINE=NDBCLUSTER;
     mysql> ALTER TABLE CountryLanguage ENGINE=NDBCLUSTER;

Selecting a database and running a `SELECT' query against a table in
that database is also accomplished in the usual manner, as is exiting
the MySQL Monitor:

     mysql> USE world;
     mysql> SELECT Name, Population FROM City ORDER BY Population DESC LIMIT 5;
     +-----------+------------+
     | Name      | Population |
     +-----------+------------+
     | Bombay    |   10500000 |
     | Seoul     |    9981619 |
     | Sa~o Paulo |    9968485 |
     | Shanghai  |    9696300 |
     | Jakarta   |    9604900 |
     +-----------+------------+
     5 rows in set (0.34 sec)

     mysql> \q
     Bye

     shell>

Applications that use MySQL can employ standard APIs to access *Note
`NDB': mysql-cluster. tables. It is important to remember that your
application must access the SQL node, and not the management or data
nodes. This brief example shows how we might execute the *Note
`SELECT': select. statement just shown by using the PHP 5.X `mysqli'
extension running on a Web server elsewhere on the network:

     <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
       "http://www.w3.org/TR/html4/loose.dtd">
     <html>
     <head>
       <meta http-equiv="Content-Type"
                content="text/html; charset=iso-8859-1">
       <title>SIMPLE mysqli SELECT</title>
     </head>
     <body>
     <?php
       # connect to SQL node:
       $link = new mysqli('192.168.0.20', 'root', 'ROOT_PASSWORD', 'world');
       # parameters for mysqli constructor are:
       #   host, user, password, database

       if( mysqli_connect_errno() )
         die("Connect failed: " . mysqli_connect_error());

       $query = "SELECT Name, Population
                 FROM City
                 ORDER BY Population DESC
                 LIMIT 5";

       # if no errors...
       if( $result = $link->query($query) )
       {
     ?>
     <table border="1" width="40%" cellpadding="4" cellspacing ="1">
       <tbody>
       <tr>
         <th width="10%">City</th>
         <th>Population</th>
       </tr>
     <?
         # then display the results...
         while($row = $result->fetch_object())
           printf("<tr>\n  <td align=\"center\">%s</td><td>%d</td>\n</tr>\n",
                   $row->Name, $row->Population);
     ?>
       </tbody
     </table>
     <?
       # ...and verify the number of rows that were retrieved
         printf("<p>Affected rows: %d</p>\n", $link->affected_rows);
       }
       else
         # otherwise, tell us what went wrong
         echo mysqli_error();

       # free the result set and the mysqli connection object
       $result->close();
       $link->close();
     ?>
     </body>
     </html>

We assume that the process running on the Web server can reach the IP
address of the SQL node.

In a similar fashion, you can use the MySQL C API, Perl-DBI,
Python-mysql, or MySQL Connectors to perform the tasks of data
definition and manipulation just as you would normally with MySQL.


File: manual.info,  Node: mysql-cluster-install-shutdown-restart,  Next: mysql-cluster-upgrade-downgrade,  Prev: mysql-cluster-install-example-data,  Up: mysql-cluster-installation

17.2.6 Safe Shutdown and Restart of MySQL Cluster
-------------------------------------------------

To shut down the cluster, enter the following command in a shell on the
machine hosting the management node:

     shell> ndb_mgm -e shutdown

The `-e' option here is used to pass a command to the *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm. client from the shell. (See *Note
mysql-cluster-program-options-common::, for more information about this
option.) The command causes the *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm, *Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd, and any *Note `ndbd':
mysql-cluster-programs-ndbd. or *Note `ndbmtd':
mysql-cluster-programs-ndbmtd. processes to terminate gracefully. Any
SQL nodes can be terminated using *Note `mysqladmin shutdown':
mysqladmin. and other means. On Windows platforms, assuming that you
have installed the SQL node as a Windows service, you can use `NET STOP
MYSQL'.

To restart the cluster on Unix platforms, run these commands:

   * On the management host (`192.168.0.10' in our example setup):

          shell> ndb_mgmd -f /var/lib/mysql-cluster/config.ini

   * On each of the data node hosts (`192.168.0.30' and `192.168.0.40'):

          shell> ndbd

   * Use the *Note `ndb_mgm': mysql-cluster-programs-ndb-mgm. client to
     verify that both data nodes have started successfully.

   * On the SQL host (`192.168.0.20'):

          shell> mysqld_safe &

On Windows platforms, assuming that you have installed all MySQL
Cluster processes as Windows services using the default service names
(see *Note mysql-cluster-install-windows-service::), you can restart
the cluster as follows:

   * On the management host (`192.168.0.10' in our example setup),
     execute the following command:

          C:\> NET START ndb_mgmd

   * On each of the data node hosts (`192.168.0.30' and
     `192.168.0.40'), execute the following command:

          C:\> NET START ndbd

   * On the management node host, use the *Note `ndb_mgm':
     mysql-cluster-programs-ndb-mgm. client to verify that the
     management node and both data nodes have started successfully (see
     *Note mysql-cluster-install-windows-initial-start::).

   * On the SQL node host (`192.168.0.20'), execute the following
     command:

          C:\> NET START mysql

In a production setting, it is usually not desirable to shut down the
cluster completely. In many cases, even when making configuration
changes, or performing upgrades to the cluster hardware or software (or
both), which require shutting down individual host machines, it is
possible to do so without shutting down the cluster as a whole by
performing a _rolling restart_ of the cluster. For more information
about doing this, see *Note mysql-cluster-rolling-restart::.


File: manual.info,  Node: mysql-cluster-upgrade-downgrade,  Prev: mysql-cluster-install-shutdown-restart,  Up: mysql-cluster-installation

17.2.7 Upgrading and Downgrading MySQL Cluster NDB 7.2
------------------------------------------------------

This section provides information about MySQL Cluster software and
table file compatibility between different MySQL Cluster NDB 7.2
releases with regard to performing upgrades and downgrades as well as
compatibility matrices and notes. You are expected already to be
familiar with installing and configuring a MySQL Cluster prior to
attempting an upgrade or downgrade. See *Note
mysql-cluster-configuration::.

For information regarding the rolling restart procedure used to perform
an online upgrade, see *Note mysql-cluster-rolling-restart::.

*Important*:

Only compatibility between MySQL versions with regard to *Note
`NDBCLUSTER': mysql-cluster. is taken into account in this section, and
there are likely other issues to be considered. _As with any other
MySQL software upgrade or downgrade, you are strongly encouraged to
review the relevant portions of the MySQL Manual for the MySQL versions
from which and to which you intend to migrate, before attempting an
upgrade or downgrade of the MySQL Cluster software_. This is especially
true when planning a migration from MySQL Cluster NDB 7.1 (or earlier)
to MySQL Cluster NDB 7.2, since the version of the underlying MySQL
Server also changes from MySQL 5.1 to MySQL 5.5. See *Note upgrading::.

Versions supported

The following versions of MySQL Cluster are supported for upgrades to
MySQL Cluster NDB 7.2 (7.2.4 and later):

   * MySQL Cluster NDB 7.1 GA releases (7.1.3 and later)

   * MySQL Cluster NDB 7.0 GA releases (7.0.5 and later)

   * MySQL Cluster NDB 6.3 GA releases (6.3.8 and later) that can be
     upgraded to MySQL Cluster NDB 7.1

For information about upgrades and downgrades in previous MySQL Cluster
release series, see Upgrade and Downgrade Compatibility: MySQL Cluster
NDB 6.x
(http://dev.mysql.com/doc/refman/5.1/en/mysql-cluster-upgrade-downgrade-compatibility-6.x.html),
and Upgrade and downgrade compatibility: MySQL Cluster NDB 7.x
(http://dev.mysql.com/doc/refman/5.1/en/mysql-cluster-upgrade-downgrade-compatibility-7.x.html).

NDB API, ClusterJ, and other applications used with recent releases of
MySQL Cluster NDB 6.3 and later should continue to work with MySQL
Cluster NDB 7.2.4 and later without rewriting or recompiling.

In MySQL Cluster NDB 7.2, the default values for a number of node
configuration parameters have changed. See *Note
mysql-cluster-development-5-5-ndb-7-2-defaults-changes::, for a listing
of these.

In MySQL Cluster NDB 7.2.7 and later, the size of the hash map is 3840
LDM threads, an increase from 240 in previous versions. When upgrading
a MySQL Cluster from MySQL Cluster NDB 7.2.6 and earlier to MySQL
Cluster NDB 7.2.9 or later, you can modify existing tables online to
take advantage of the new size: following the upgrade, increase the
number of fragments by (for example) adding new data nodes to the
cluster, and then execute *Note `ALTER ONLINE TABLE ... REORGANIZE
PARTITION': alter-table-partition-operations. on any tables that were
created in the older version. Following this, these tables can use the
larger hash map size. (Bug #14645319)

Due to this change, it was not possible to downgrade online to MySQL
Cluster NDB 7.2.6 or earlier. This issue was resolved in MySQL Cluster
NDB 7.2.11, where the size is made configurable using the
`DefaultHashMapSize' parameter. (Bug #14800539) See the description of
this parameter for more information.


File: manual.info,  Node: mysql-cluster-configuration,  Next: mysql-cluster-programs,  Prev: mysql-cluster-installation,  Up: mysql-cluster

17.3 Configuration of MySQL Cluster NDB 7.2
===========================================

* Menu:

* mysql-cluster-quick::          Quick Test Setup of MySQL Cluster
* mysql-cluster-config-file::    MySQL Cluster Configuration Files
* mysql-cluster-params-overview::  Overview of MySQL Cluster Configuration Parameters
* mysql-cluster-options-variables::  MySQL Server Options and Variables for MySQL Cluster
* mysql-cluster-interconnects::  Using High-Speed Interconnects with MySQL Cluster

A MySQL server that is part of a MySQL Cluster differs in one chief
respect from a normal (nonclustered) MySQL server, in that it employs
the *Note `NDB': mysql-cluster. storage engine. This engine is also
referred to sometimes as *Note `NDBCLUSTER': mysql-cluster, although
`NDB' is preferred.

To avoid unnecessary allocation of resources, the server is configured
by default with the *Note `NDB': mysql-cluster.  storage engine
disabled. To enable *Note `NDB': mysql-cluster, you must modify the
server's `my.cnf' configuration file, or start the server with the
`--ndbcluster' option.

This MySQL server is a part of the cluster, so it also must know how to
access an management node to obtain the cluster configuration data. The
default behavior is to look for the management node on `localhost'.
However, should you need to specify that its location is elsewhere,
this can be done in `my.cnf', or with the *Note `mysql': mysql.
client. Before the *Note `NDB': mysql-cluster. storage engine can be
used, at least one management node must be operational, as well as any
desired data nodes.

For more information about `--ndbcluster' and other *Note `mysqld':
mysqld. options specific to MySQL Cluster, see *Note
mysql-cluster-program-options-mysqld::.

For information about installing MySQL Cluster, see *Note
mysql-cluster-installation::.


File: manual.info,  Node: mysql-cluster-quick,  Next: mysql-cluster-config-file,  Prev: mysql-cluster-configuration,  Up: mysql-cluster-configuration

17.3.1 Quick Test Setup of MySQL Cluster
----------------------------------------

To familiarize you with the basics, we will describe the simplest
possible configuration for a functional MySQL Cluster. After this, you
should be able to design your desired setup from the information
provided in the other relevant sections of this chapter.

First, you need to create a configuration directory such as
`/var/lib/mysql-cluster', by executing the following command as the
system `root' user:

     shell> mkdir /var/lib/mysql-cluster

In this directory, create a file named `config.ini' that contains the
following information. Substitute appropriate values for `HostName' and
`DataDir' as necessary for your system.

     # file "config.ini" - showing minimal setup consisting of 1 data node,
     # 1 management server, and 3 MySQL servers.
     # The empty default sections are not required, and are shown only for
     # the sake of completeness.
     # Data nodes must provide a hostname but MySQL Servers are not required
     # to do so.
     # If you don't know the hostname for your machine, use localhost.
     # The DataDir parameter also has a default value, but it is recommended to
     # set it explicitly.
     # Note: [db], [api], and [mgm] are aliases for [ndbd], [mysqld], and [ndb_mgmd],
     # respectively. [db] is deprecated and should not be used in new installations.

     [ndbd default]
     NoOfReplicas= 1

     [mysqld  default]
     [ndb_mgmd default]
     [tcp default]

     [ndb_mgmd]
     HostName= myhost.example.com

     [ndbd]
     HostName= myhost.example.com
     DataDir= /var/lib/mysql-cluster

     [mysqld]
     [mysqld]
     [mysqld]

You can now start the *Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd. management server. By default, it
attempts to read the `config.ini' file in its current working
directory, so change location into the directory where the file is
located and then invoke *Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd.:

     shell> cd /var/lib/mysql-cluster
     shell> ndb_mgmd

Then start a single data node by running *Note `ndbd':
mysql-cluster-programs-ndbd.:

     shell> ndbd

For command-line options which can be used when starting *Note `ndbd':
mysql-cluster-programs-ndbd, see *Note
mysql-cluster-program-options-common::.

By default, *Note `ndbd': mysql-cluster-programs-ndbd. looks for the
management server at `localhost' on port 1186.

*Note*:

If you have installed MySQL from a binary tarball, you will need to
specify the path of the *Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd. and *Note `ndbd':
mysql-cluster-programs-ndbd. servers explicitly. (Normally, these will
be found in `/usr/local/mysql/bin'.)

Finally, change location to the MySQL data directory (usually
`/var/lib/mysql' or `/usr/local/mysql/data'), and make sure that the
`my.cnf' file contains the option necessary to enable the NDB storage
engine:

     [mysqld]
     ndbcluster

You can now start the MySQL server as usual:

     shell> mysqld_safe --user=mysql &

Wait a moment to make sure the MySQL server is running properly.  If
you see the notice `mysql ended', check the server's `.err' file to
find out what went wrong.

If all has gone well so far, you now can start using the cluster.
Connect to the server and verify that the *Note `NDBCLUSTER':
mysql-cluster. storage engine is enabled:

     shell> mysql
     Welcome to the MySQL monitor.  Commands end with ; or \g.
     Your MySQL connection id is 1 to server version: 5.5.35

     Type 'help;' or '\h' for help. Type '\c' to clear the buffer.

     mysql> SHOW ENGINES\G
     ...
     *************************** 12. row ***************************
     Engine: NDBCLUSTER
     Support: YES
     Comment: Clustered, fault-tolerant, memory-based tables
     *************************** 13. row ***************************
     Engine: NDB
     Support: YES
     Comment: Alias for NDBCLUSTER
     ...

The row numbers shown in the preceding example output may be different
from those shown on your system, depending upon how your server is
configured.

Try to create an *Note `NDBCLUSTER': mysql-cluster. table:

     shell> mysql
     mysql> USE test;
     Database changed

     mysql> CREATE TABLE ctest (i INT) ENGINE=NDBCLUSTER;
     Query OK, 0 rows affected (0.09 sec)

     mysql> SHOW CREATE TABLE ctest \G
     *************************** 1. row ***************************
            Table: ctest
     Create Table: CREATE TABLE `ctest` (
       `i` int(11) default NULL
     ) ENGINE=ndbcluster DEFAULT CHARSET=latin1
     1 row in set (0.00 sec)

To check that your nodes were set up properly, start the management
client:

     shell> ndb_mgm

Use the `SHOW' command from within the management client to obtain a
report on the cluster's status:

     ndb_mgm> SHOW
     Cluster Configuration
     ---------------------
     [ndbd(NDB)]     1 node(s)
     id=2    @127.0.0.1  (Version: 5.5.33-ndb-7.2.14, Nodegroup: 0, Master)

     [ndb_mgmd(MGM)] 1 node(s)
     id=1    @127.0.0.1  (Version: 5.5.33-ndb-7.2.14)

     [mysqld(API)]   3 node(s)
     id=3    @127.0.0.1  (Version: 5.5.33-ndb-7.2.14)
     id=4 (not connected, accepting connect from any host)
     id=5 (not connected, accepting connect from any host)

At this point, you have successfully set up a working MySQL Cluster.
You can now store data in the cluster by using any table created with
`ENGINE=NDBCLUSTER' or its alias `ENGINE=NDB'.


File: manual.info,  Node: mysql-cluster-config-file,  Next: mysql-cluster-params-overview,  Prev: mysql-cluster-quick,  Up: mysql-cluster-configuration

17.3.2 MySQL Cluster Configuration Files
----------------------------------------

* Menu:

* mysql-cluster-config-example::  MySQL Cluster Configuration: Basic Example
* mysql-cluster-config-starting::  Recommended Starting Configuration for MySQL Cluster
* mysql-cluster-connection-strings::  MySQL Cluster Connection Strings
* mysql-cluster-computer-definition::  Defining Computers in a MySQL Cluster
* mysql-cluster-mgm-definition::  Defining a MySQL Cluster Management Server
* mysql-cluster-ndbd-definition::  Defining MySQL Cluster Data Nodes
* mysql-cluster-api-definition::  Defining SQL and Other API Nodes in a MySQL Cluster
* mysql-cluster-tcp-definition::  MySQL Cluster TCP/IP Connections
* mysql-cluster-tcp-definition-direct::  MySQL Cluster TCP/IP Connections Using Direct Connections
* mysql-cluster-shm-definition::  MySQL Cluster Shared-Memory Connections
* mysql-cluster-sci-definition::  SCI Transport Connections in MySQL Cluster
* mysql-cluster-config-send-buffers::  Configuring MySQL Cluster Send Buffer Parameters

Configuring MySQL Cluster requires working with two files:

   * `my.cnf': Specifies options for all MySQL Cluster executables.
     This file, with which you should be familiar with from previous
     work with MySQL, must be accessible by each executable running in
     the cluster.

   * `config.ini': This file, sometimes known as the _global
     configuration file_, is read only by the MySQL Cluster management
     server, which then distributes the information contained therein
     to all processes participating in the cluster. `config.ini'
     contains a description of each node involved in the cluster.  This
     includes configuration parameters for data nodes and configuration
     parameters for connections between all nodes in the cluster. For a
     quick reference to the sections that can appear in this file, and
     what sorts of configuration parameters may be placed in each
     section, see Sections of the `config.ini' File.

Caching of configuration data

In MySQL Cluster NDB 7.2, MySQL Cluster uses _stateful configuration_.
Rather than reading the global configuration file every time the
management server is restarted, the management server caches the
configuration the first time it is started, and thereafter, the global
configuration file is read only when one of the following conditions is
true:

   * The management server is started using the `--initial' option

     In this case, the global configuration file is re-read, any
     existing cache files are deleted, and the management server
     creates a new configuration cache.

   * The management server is started using the `--reload' option

     In this case, the management server compares its cache with the
     global configuration file. If they differ, the management server
     creates a new configuration cache; any existing configuration
     cache is preserved, but not used. If the management server's cache
     and the global configuration file contain the same configuration
     data, then the existing cache is used, and no new cache is created.

   * The management server is started using a `--config-cache' option

     This option can be used to force the management server to bypass
     configuration caching altogether. In this case, the management
     server ignores any configuration files that may be present, always
     reading its configuration data from the `config.ini' file instead.

   * No configuration cache is found

     In this case, the management server reads the global configuration
     file and creates a cache containing the same configuration data as
     found in the file.

Configuration cache files

The management server by default creates configuration cache files in a
directory named `mysql-cluster' in the MySQL installation directory.
(If you build MySQL Cluster from source on a Unix system, the default
location is `/usr/local/mysql-cluster'.) This can be overridden at
runtime by starting the management server with the `--configdir'
option. Configuration cache files are binary files named according to
the pattern `ndb_NODE_ID_config.bin.SEQ_ID', where NODE_ID is the
management server's node ID in the cluster, and SEQ_ID is a cache
idenitifer. Cache files are numbered sequentially using SEQ_ID, in the
order in which they are created. The management server uses the latest
cache file as determined by the SEQ_ID.

*Note*:

It is possible to roll back to a previous configuration by deleting
later configuration cache files, or by renaming an earlier cache file
so that it has a higher SEQ_ID. However, since configuration cache
files are written in a binary format, you should not attempt to edit
their contents by hand.

For more information about the `--configdir', `--initial', and
`--reload' options for the MySQL Cluster management server, see *Note
mysql-cluster-programs-ndb-mgmd::.

We are continuously making improvements in Cluster configuration and
attempting to simplify this process. Although we strive to maintain
backward compatibility, there may be times when introduce an
incompatible change. In such cases we will try to let Cluster users
know in advance if a change is not backward compatible. If you find
such a change and we have not documented it, please report it in the
MySQL bugs database using the instructions given in *Note bug-reports::.


File: manual.info,  Node: mysql-cluster-config-example,  Next: mysql-cluster-config-starting,  Prev: mysql-cluster-config-file,  Up: mysql-cluster-config-file

17.3.2.1 MySQL Cluster Configuration: Basic Example
...................................................

To support MySQL Cluster, you will need to update `my.cnf' as shown in
the following example.  You may also specify these parameters on the
command line when invoking the executables.

*Note*:

The options shown here should not be confused with those that are used
in `config.ini' global configuration files. Global configuration
options are discussed later in this section.

     # my.cnf
     # example additions to my.cnf for MySQL Cluster
     # (valid in MySQL 5.5)

     # enable ndbcluster storage engine, and provide connection string for
     # management server host (default port is 1186)
     [mysqld]
     ndbcluster
     ndb-connectstring=ndb_mgmd.mysql.com

     # provide connection string for management server host (default port: 1186)
     [ndbd]
     connect-string=ndb_mgmd.mysql.com

     # provide connection string for management server host (default port: 1186)
     [ndb_mgm]
     connect-string=ndb_mgmd.mysql.com

     # provide location of cluster configuration file
     [ndb_mgmd]
     config-file=/etc/config.ini

(For more information on connection strings, see *Note
mysql-cluster-connection-strings::.)

     # my.cnf
     # example additions to my.cnf for MySQL Cluster
     # (will work on all versions)

     # enable ndbcluster storage engine, and provide connection string for management
     # server host to the default port 1186
     [mysqld]
     ndbcluster
     ndb-connectstring=ndb_mgmd.mysql.com:1186

*Important*:

Once you have started a *Note `mysqld': mysqld. process with the *Note
`NDBCLUSTER': mysql-cluster. and `ndb-connectstring' parameters in the
`[mysqld]' in the `my.cnf' file as shown previously, you cannot execute
any *Note `CREATE TABLE': create-table. or *Note `ALTER TABLE':
alter-table. statements without having actually started the cluster.
Otherwise, these statements will fail with an error. _This is by
design_.

You may also use a separate `[mysql_cluster]' section in the cluster
`my.cnf' file for settings to be read and used by all executables:

     # cluster-specific settings
     [mysql_cluster]
     ndb-connectstring=ndb_mgmd.mysql.com:1186

For additional *Note `NDB': mysql-cluster. variables that can be set in
the `my.cnf' file, see *Note mysql-cluster-system-variables::.

The MySQL Cluster global configuration file is by convention named
`config.ini' (but this is not required). If needed, it is read by *Note
`ndb_mgmd': mysql-cluster-programs-ndb-mgmd.  at startup and can be
placed in any location that can be read by it. The location and name of
the configuration are specified using `--config-file=PATH_NAME' with
*Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. on the command line.
This option has no default value, and is ignored if *Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd. uses the configuration cache.

The global configuration file for MySQL Cluster uses INI format, which
consists of sections preceded by section headings (surrounded by square
brackets), followed by the appropriate parameter names and values. One
deviation from the standard INI format is that the parameter name and
value can be separated by a colon (``:'') as well as the equal sign
(``=''); however, the equal sign is preferred. Another deviation is
that sections are not uniquely identified by section name. Instead,
unique sections (such as two different nodes of the same type) are
identified by a unique ID specified as a parameter within the section.

Default values are defined for most parameters, and can also be
specified in `config.ini'. To create a default value section, simply
add the word `default' to the section name. For example, an `[ndbd]'
section contains parameters that apply to a particular data node,
whereas an `[ndbd default]' section contains parameters that apply to
all data nodes. Suppose that all data nodes should use the same data
memory size. To configure them all, create an `[ndbd default]' section
that contains a `DataMemory' line to specify the data memory size.

*Note*:

In some older releases of MySQL Cluster, there was no default value for
`NoOfReplicas', which always had to be specified explicitly in the
`[ndbd default]' section. Although this parameter now has a default
value of 2, which is the recommended setting in most common usage
scenarios, it is still recommended practice to set this parameter
explicitly.

The global configuration file must define the computers and nodes
involved in the cluster and on which computers these nodes are located.
An example of a simple configuration file for a cluster consisting of
one management server, two data nodes and two MySQL servers is shown
here:

     # file "config.ini" - 2 data nodes and 2 SQL nodes
     # This file is placed in the startup directory of ndb_mgmd (the
     # management server)
     # The first MySQL Server can be started from any host. The second
     # can be started only on the host mysqld_5.mysql.com

     [ndbd default]
     NoOfReplicas= 2
     DataDir= /var/lib/mysql-cluster

     [ndb_mgmd]
     Hostname= ndb_mgmd.mysql.com
     DataDir= /var/lib/mysql-cluster

     [ndbd]
     HostName= ndbd_2.mysql.com

     [ndbd]
     HostName= ndbd_3.mysql.com

     [mysqld]
     [mysqld]
     HostName= mysqld_5.mysql.com

*Note*:

The preceding example is intended as a minimal starting configuration
for purposes of familiarization with MySQL Cluster, and is almost
certain not to be sufficient for production settings. See *Note
mysql-cluster-config-starting::, which provides a more complete example
starting configuration.

Each node has its own section in the `config.ini' file. For example,
this cluster has two data nodes, so the preceding configuration file
contains two `[ndbd]' sections defining these nodes.

*Note*:

Do not place comments on the same line as a section heading in the
`config.ini' file; this causes the management server not to start
because it cannot parse the configuration file in such cases.

* Sections of the `config.ini' File *

There are six different sections that you can use in the `config.ini'
configuration file, as described in the following list:

   * `[computer]': Defines cluster hosts. This is not required to
     configure a viable MySQL Cluster, but be may used as a convenience
     when setting up a large cluster.  See *Note
     mysql-cluster-computer-definition::, for more information.

   * `[ndbd]': Defines a cluster data node (*Note `ndbd':
     mysql-cluster-programs-ndbd. process). See *Note
     mysql-cluster-ndbd-definition::, for details.

   * `[mysqld]': Defines the cluster's MySQL server nodes (also called
     SQL or API nodes). For a discussion of SQL node configuration, see
     *Note mysql-cluster-api-definition::.

   * `[mgm]' or `[ndb_mgmd]': Defines a cluster management server (MGM)
     node. For information concerning the configuration of management
     nodes, see *Note mysql-cluster-mgm-definition::.

   * `[tcp]': Defines a TCP/IP connection between cluster nodes, with
     TCP/IP being the default connection protocol. Normally, `[tcp]' or
     `[tcp default]' sections are not required to set up a MySQL
     Cluster, as the cluster handles this automatically; however, it
     may be necessary in some situations to override the defaults
     provided by the cluster.  See *Note
     mysql-cluster-tcp-definition::, for information about available
     TCP/IP configuration parameters and how to use them. (You may also
     find *Note mysql-cluster-tcp-definition-direct:: to be of interest
     in some cases.)

   * `[shm]': Defines shared-memory connections between nodes. In MySQL
     5.5, it is enabled by default, but should still be considered
     experimental. For a discussion of SHM interconnects, see *Note
     mysql-cluster-shm-definition::.

   * `[sci]':Defines _Scalable Coherent Interface_ connections between
     cluster data nodes. Such connections require software which, while
     freely available, is not part of the MySQL Cluster distribution,
     as well as specialized hardware. See *Note
     mysql-cluster-sci-definition:: for detailed information about SCI
     interconnects.

You can define `default' values for each section. All Cluster parameter
names are case-insensitive, which differs from parameters specified in
`my.cnf' or `my.ini' files.


File: manual.info,  Node: mysql-cluster-config-starting,  Next: mysql-cluster-connection-strings,  Prev: mysql-cluster-config-example,  Up: mysql-cluster-config-file

17.3.2.2 Recommended Starting Configuration for MySQL Cluster
.............................................................

Achieving the best performance from a MySQL Cluster depends on a number
of factors including the following:

   * MySQL Cluster software version

   * Numbers of data nodes and SQL nodes

   * Hardware

   * Operating system

   * Amount of data to be stored

   * Size and type of load under which the cluster is to operate

Therefore, obtaining an optimum configuration is likely to be an
iterative process, the outcome of which can vary widely with the
specifics of each MySQL Cluster deployment. Changes in configuration
are also likely to be indicated when changes are made in the platform
on which the cluster is run, or in applications that use the MySQL
Cluster's data. For these reasons, it is not possible to offer a single
configuration that is ideal for all usage scenarios. However, in this
section, we provide a recommended base configuration.

Starting `config.ini' file

The following `config.ini' file is a recommended starting point for
configuring a cluster running MySQL Cluster NDB 7.2:

     # TCP PARAMETERS

     [tcp default]`SendBufferMemory'=2M
     `ReceiveBufferMemory'=2M

     # Increasing the sizes of these 2 buffers beyond the default values
     # helps prevent bottlenecks due to slow disk I/O.

     # MANAGEMENT NODE PARAMETERS

     [ndb_mgmd default]
     `DataDir'=PATH/TO/MANAGEMENT/SERVER/DATA/DIRECTORY

     # It is possible to use a different data directory for each management
     # server, but for ease of administration it is preferable to be
     # consistent.

     [ndb_mgmd]
     `HostName'=MANAGEMENT-SERVER-A-HOSTNAME
     # `NodeId'=MANAGEMENT-SERVER-A-NODEID

     [ndb_mgmd]
     `HostName'=MANAGEMENT-SERVER-B-HOSTNAME
     # `NodeId'=MANAGEMENT-SERVER-B-NODEID

     # Using 2 management servers helps guarantee that there is always an
     # arbitrator in the event of network partitioning, and so is
     # recommended for high availability. Each management server must be
     # identified by a HostName. You may for the sake of convenience specify
     # a NodeId for any management server, although one will be allocated
     # for it automatically; if you do so, it must be in the range 1-255
     # inclusive and must be unique among all IDs specified for cluster
     # nodes.

     # DATA NODE PARAMETERS

     [ndbd default]
     `NoOfReplicas'=2

     # Using 2 replicas is recommended to guarantee availability of data;
     # using only 1 replica does not provide any redundancy, which means
     # that the failure of a single data node causes the entire cluster to
     # shut down. We do not recommend using more than 2 replicas, since 2 is
     # sufficient to provide high availability, and we do not currently test
     # with greater values for this parameter.

     `LockPagesInMainMemory'=1

     # On Linux and Solaris systems, setting this parameter locks data node
     # processes into memory. Doing so prevents them from swapping to disk,
     # which can severely degrade cluster performance.

     `DataMemory'=3072M
     `IndexMemory'=384M

     # The values provided for DataMemory and IndexMemory assume 4 GB RAM
     # per data node. However, for best results, you should first calculate
     # the memory that would be used based on the data you actually plan to
     # store (you may find the *Note ndb_size.pl: mysql-cluster-programs-ndb-size-pl. utility helpful in estimating
     # this), then allow an extra 20% over the calculated values. Naturally,
     # you should ensure that each data node host has at least as much
     # physical memory as the sum of these two values.

     # `ODirect'=1

     # Enabling this parameter causes NDBCLUSTER to try using O_DIRECT
     # writes for local checkpoints and redo logs; this can reduce load on
     # CPUs. We recommend doing so when using MySQL Cluster on systems running
     # Linux kernel 2.6 or later.

     `NoOfFragmentLogFiles'=300
     `DataDir'=PATH/TO/DATA/NODE/DATA/DIRECTORY
     `MaxNoOfConcurrentOperations'=100000

     `SchedulerSpinTimer'=400
     `SchedulerExecutionTimer'=100
     `RealTimeScheduler'=1
     # Setting these parameters allows you to take advantage of real-time scheduling
     # of NDB threads to achieve increased throughput when using *Note `ndbd': mysql-cluster-programs-ndbd. They
     # are not needed when using *Note `ndbmtd': mysql-cluster-programs-ndbmtd.; in particular, you should not set
     # `RealTimeScheduler' for *Note `ndbmtd': mysql-cluster-programs-ndbmtd. data nodes.

     `TimeBetweenGlobalCheckpoints'=1000
     `TimeBetweenEpochs'=200
     `DiskCheckpointSpeed'=10M
     `DiskCheckpointSpeedInRestart'=100M
     `RedoBuffer'=32M

     # `CompressedLCP'=1
     # `CompressedBackup'=1
     # Enabling CompressedLCP and CompressedBackup causes, respectively, local
     checkpoint files and backup files to be compressed, which can result in a space
     savings of up to 50% over noncompressed LCPs and backups.

     # `MaxNoOfLocalScans'=64
     `MaxNoOfTables'=1024
     `MaxNoOfOrderedIndexes'=256

     [ndbd]
     `HostName'=DATA-NODE-A-HOSTNAME
     # `NodeId'=DATA-NODE-A-NODEID

     `LockExecuteThreadToCPU'=1
     `LockMaintThreadsToCPU'=0
     # On systems with multiple CPUs, these parameters can be used to lock NDBCLUSTER
     # threads to specific CPUs

     [ndbd]
     `HostName'=DATA-NODE-B-HOSTNAME
     # `NodeId'=DATA-NODE-B-NODEID

     `LockExecuteThreadToCPU'=1
     `LockMaintThreadsToCPU'=0

     # You must have an [ndbd] section for every data node in the cluster;
     # each of these sections must include a HostName. Each section may
     # optionally include a NodeId for convenience, but in most cases, it is
     # sufficient to allow the cluster to allocate node IDs dynamically. If
     # you do specify the node ID for a data node, it must be in the range 1
     # to 48 inclusive and must be unique among all IDs specified for
     # cluster nodes.

     # SQL NODE / API NODE PARAMETERS

     [mysqld]
     # `HostName'=SQL-NODE-A-HOSTNAME
     # `NodeId'=SQL-NODE-A-NODEID

     [mysqld]

     [mysqld]

     # Each API or SQL node that connects to the cluster requires a [mysqld]
     # or [api] section of its own. Each such section defines a connection
     # `slot'; you should have at least as many of these sections in the
     # config.ini file as the total number of API nodes and SQL nodes that
     # you wish to have connected to the cluster at any given time. There is
     # no performance or other penalty for having extra slots available in
     # case you find later that you want or need more API or SQL nodes to
     # connect to the cluster at the same time.
     # If no HostName is specified for a given [mysqld] or [api] section,
     # then _any_ API or SQL node may use that slot to connect to the
     # cluster. You may wish to use an explicit HostName for one connection slot
     # to guarantee that an API or SQL node from that host can always
     # connect to the cluster. If you wish to prevent API or SQL nodes from
     # connecting from other than a desired host or hosts, then use a
     # HostName for every [mysqld] or [api] section in the config.ini file.
     # You can if you wish define a node ID (NodeId parameter) for any API or
     # SQL node, but this is not necessary; if you do so, it must be in the
     # range 1 to 255 inclusive and must be unique among all IDs specified
     # for cluster nodes.

Recommended `my.cnf' options for SQL nodes

MySQL Servers acting as MySQL Cluster SQL nodes must always be started
with the `--ndbcluster' and `--ndb-connectstring' options, either on
the command line or in `my.cnf'. In addition, set the following options
for all *Note `mysqld': mysqld. processes in the cluster, unless your
setup requires otherwise:

   * `--ndb-use-exact-count=0'

   * `--ndb-index-stat-enable=0'

   * `--ndb-force-send=1'

   * `--engine-condition-pushdown=1'


File: manual.info,  Node: mysql-cluster-connection-strings,  Next: mysql-cluster-computer-definition,  Prev: mysql-cluster-config-starting,  Up: mysql-cluster-config-file

17.3.2.3 MySQL Cluster Connection Strings
.........................................

With the exception of the MySQL Cluster management server (*Note
`ndb_mgmd': mysql-cluster-programs-ndb-mgmd.), each node that is part
of a MySQL Cluster requires a _connection string_ that points to the
management server's location. This connection string is used in
establishing a connection to the management server as well as in
performing other tasks depending on the node's role in the cluster. The
syntax for a connection string is as follows:

     [nodeid=NODE_ID, ]HOST-DEFINITION[, HOST-DEFINITION[, ...]]

     HOST-DEFINITION:
         HOST_NAME[:PORT_NUMBER]

`node_id' is an integer greater than or equal to 1 which identifies a
node in `config.ini'.  HOST_NAME is a string representing a valid
Internet host name or IP address.  PORT_NUMBER is an integer referring
to a TCP/IP port number.

     example 1 (long):    "nodeid=2,myhost1:1100,myhost2:1100,192.168.0.3:1200"
     example 2 (short):   "myhost1"

`localhost:1186' is used as the default connection string value if none
is provided. If PORT_NUM is omitted from the connection string, the
default port is 1186. This port should always be available on the
network because it has been assigned by IANA for this purpose (see
`http://www.iana.org/assignments/port-numbers' for details).

By listing multiple host definitions, it is possible to designate
several redundant management servers. A MySQL Cluster data or API node
attempts to contact successive management servers on each host in the
order specified, until a successful connection has been established.

It is also possible to specify in a connection string one or more bind
addresses to be used by nodes having multiple network interfaces for
connecting to management servers. A bind address consists of a hostname
or network address and an optional port number. This enhanced syntax
for connection strings is shown here:

     [nodeid=NODE_ID, ]
         [bind-address=HOST-DEFINITION, ]
         HOST-DEFINITION[; bind-address=HOST-DEFINITION]
         HOST-DEFINITION[; bind-address=HOST-DEFINITION]
         [, ...]]

     HOST-DEFINITION:
         HOST_NAME[:PORT_NUMBER]

If a single bind address is used in the connection string _prior_ to
specifying any management hosts, then this address is used as the
default for connecting to any of them (unless overridden for a given
management server; see later in this section for an example). For
example, the following connection string causes the node to use
`192.168.178.242' regardless of the management server to which it
connects:

     bind-address=192.168.178.242, poseidon:1186, perch:1186

If a bind address is specified _following_ a management host
definition, then it is used only for connecting to that management
node. Consider the following connection string:

     poseidon:1186;bind-address=localhost, perch:1186;bind-address=192.168.178.242

In this case, the node uses `localhost' to connect to the management
server running on the host named `poseidon' and `192.168.178.242' to
connect to the management server running on the host named `perch'.

You can specify a default bind address and then override this default
for one or more specific management hosts. In the following example,
`localhost' is used for connecting to the management server running on
host `poseidon'; since `192.168.178.242' is specified first (before any
management server definitions), it is the default bind address and so
is used for connecting to the management servers on hosts `perch' and
`orca':

     bind-address=192.168.178.242,poseidon:1186;bind-address=localhost,perch:1186,orca:2200

There are a number of different ways to specify the connection string:

   * Each executable has its own command-line option which enables
     specifying the management server at startup. (See the
     documentation for the respective executable.)

   * It is also possible to set the connection string for all nodes in
     the cluster at once by placing it in a `[mysql_cluster]' section
     in the management server's `my.cnf' file.

   * For backward compatibility, two other options are available, using
     the same syntax:

       1. Set the `NDB_CONNECTSTRING' environment variable to contain
          the connection string.

       2. Write the connection string for each executable into a text
          file named `Ndb.cfg' and place this file in the executable's
          startup directory.

     However, these are now deprecated and should not be used for new
     installations.

The recommended method for specifying the connection string is to set
it on the command line or in the `my.cnf' file for each executable.


File: manual.info,  Node: mysql-cluster-computer-definition,  Next: mysql-cluster-mgm-definition,  Prev: mysql-cluster-connection-strings,  Up: mysql-cluster-config-file

17.3.2.4 Defining Computers in a MySQL Cluster
..............................................

The `[computer]' section has no real significance other than serving as
a way to avoid the need of defining host names for each node in the
system. All parameters mentioned here are required.

   *  `Id'

     This table provides type and value information for the Id computer
     configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         string            [none]            ...
     *Restart Type:*                                       
     IS                                                    

     This is a unique identifier, used to refer to the host computer
     elsewhere in the configuration file.

     *Important*:

     The computer ID is _not_ the same as the node ID used for a
     management, API, or data node.  Unlike the case with node IDs, you
     cannot use `NodeId' in place of `Id' in the `[computer]' section
     of the `config.ini' file.

   *  `HostName'

     This table provides type and value information for the HostName
     computer configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         name or IP        [none]            ...
                       address                             
     *Restart Type:* S                                     

     This is the computer's hostname or IP address.


File: manual.info,  Node: mysql-cluster-mgm-definition,  Next: mysql-cluster-ndbd-definition,  Prev: mysql-cluster-computer-definition,  Up: mysql-cluster-config-file

17.3.2.5 Defining a MySQL Cluster Management Server
...................................................

The `[ndb_mgmd]' section is used to configure the behavior of the
management server. `[mgm]' can be used as an alias; the two section
names are equivalent.  All parameters in the following list are
optional and assume their default values if omitted.

*Note*:

If neither the `ExecuteOnComputer' nor the `HostName' parameter is
present, the default value `localhost' will be assumed for both.

   *  `Id'

     This table provides type and value information for the Id
     management node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          [none]            1 - 255
     *Restart Type:*                                       
     IS                                                    

     Each node in the cluster has a unique identity. For a management
     node, this is represented by an integer value in the range 1 to
     255, inclusive. This ID is used by all internal cluster messages
     for addressing the node, and so must be unique for each MySQL
     Cluster node, regardless of the type of node.

     *Note*:

     Data node IDs must be less than 49. If you plan to deploy a large
     number of data nodes, it is a good idea to limit the node IDs for
     management nodes (and API nodes) to values greater than 48.

     The use of the `Id' parameter for identifying management nodes is
     deprecated in favor of `NodeId'. Although `Id' continues to be
     supported for backward compatibility, it now generates a warning
     and is subject to removal in a future version of MySQL Cluster.

   *  `NodeId'

     This table provides type and value information for the NodeId
     management node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          [none]            1 - 255
     *Restart Type:*                                       
     IS                                                    

     Each node in the cluster has a unique identity. For a management
     node, this is represented by an integer value in the range 1 to
     255 inclusive. This ID is used by all internal cluster messages
     for addressing the node, and so must be unique for each MySQL
     Cluster node, regardless of the type of node.

     *Note*:

     Data node IDs must be less than 49. If you plan to deploy a large
     number of data nodes, it is a good idea to limit the node IDs for
     management nodes (and API nodes) to values greater than 48.

     `NodeId' is the preferred parameter name to use when identifying
     management nodes. Although the older `Id' continues to be
     supported for backward compatibility, it is now deprecated and
     generates a warning when used; it is also subject to removal in a
     future MySQL Cluster release.

   *  `ExecuteOnComputer'

     This table provides type and value information for the
     ExecuteOnComputer management node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         name              [none]            ...
     *Restart Type:* S                                     

     This refers to the `Id' set for one of the computers defined in a
     `[computer]' section of the `config.ini' file.

   *  `PortNumber'

     This table provides type and value information for the PortNumber
     management node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          1186              0 - 64K
     *Restart Type:* N                                     

     This is the port number on which the management server listens for
     configuration requests and management commands.

   *  `HostName'

     This table provides type and value information for the HostName
     management node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         name or IP        [none]            ...
                       address                             
     *Restart Type:* S                                     

     Specifying this parameter defines the hostname of the computer on
     which the management node is to reside. To specify a hostname
     other than `localhost', either this parameter or
     `ExecuteOnComputer' is required.

   *  `LogDestination'

     This table provides type and value information for the
     LogDestination management node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         {CONSOLE|SYSLOG|FILE}[see text]        ...
     *Restart Type:* N                                     

     This parameter specifies where to send cluster logging
     information. There are three options in this regard--`CONSOLE',
     `SYSLOG', and `FILE'--with `FILE' being the default:

        * `CONSOLE' outputs the log to `stdout':

               CONSOLE

        * `SYSLOG' sends the log to a `syslog' facility, possible values
          being one of `auth', `authpriv', `cron', `daemon', `ftp',
          `kern', `lpr', `mail', `news', `syslog', `user', `uucp',
          `local0', `local1', `local2', `local3', `local4', `local5',
          `local6', or `local7'.

          *Note*:

          Not every facility is necessarily supported by every
          operating system.

               SYSLOG:facility=syslog

        * `FILE' pipes the cluster log output to a regular file on the
          same machine. The following values can be specified:

             * `filename': The name of the log file.

               In MySQL Cluster NDB 7.2.6 and earlier, the log file's
               default name, used if `FILE' was specified without also
               setting `filename', was `logger.log'. Beginning with
               MySQL Cluster NDB 7.2.7, the default log file name used
               in such cases is `ndb_NODEID_cluster.log'.

             * `maxsize': The maximum size (in bytes) to which the file
               can grow before logging rolls over to a new file. When
               this occurs, the old log file is renamed by appending .N
               to the file name, where N is the next number not yet
               used with this name.

             * `maxfiles': The maximum number of log files.

               FILE:filename=cluster.log,maxsize=1000000,maxfiles=6

          The default value for the `FILE' parameter is
          `FILE:filename=ndb_NODE_ID_cluster.log,maxsize=1000000,maxfiles=6',
          where NODE_ID is the ID of the node.

     It is possible to specify multiple log destinations separated by
     semicolons as shown here:

          CONSOLE;SYSLOG:facility=local0;FILE:filename=/var/log/mgmd

   *  `ArbitrationRank'

     This table provides type and value information for the
     ArbitrationRank management node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         0-2               1                 0 - 2
     *Restart Type:* N                                     

     This parameter is used to define which nodes can act as
     arbitrators. Only management nodes and SQL nodes can be
     arbitrators. `ArbitrationRank' can take one of the following
     values:

        * `0': The node will never be used as an arbitrator.

        * `1': The node has high priority; that is, it will be
          preferred as an arbitrator over low-priority nodes.

        * `2': Indicates a low-priority node which be used as an
          arbitrator only if a node with a higher priority is not
          available for that purpose.

     Normally, the management server should be configured as an
     arbitrator by setting its `ArbitrationRank' to 1 (the default for
     management nodes) and those for all SQL nodes to 0 (the default
     for SQL nodes).

     You can disable arbitration completely either by setting
     `ArbitrationRank' to 0 on all management and SQL nodes, or by
     setting the `Arbitration' parameter in the `[ndbd default]' section
     of the `config.ini' global configuration file. Setting
     `Arbitration' causes any settings for `ArbitrationRank' to be
     disregarded.

   *  `ArbitrationDelay'

     This table provides type and value information for the
     ArbitrationDelay management node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         milliseconds      0                 0 - 4G
     *Restart Type:* N                                     

     An integer value which causes the management server's responses to
     arbitration requests to be delayed by that number of milliseconds.
     By default, this value is 0; it is normally not necessary to
     change it.

   *  `DataDir'

     This table provides type and value information for the DataDir
     management node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         path              .                 ...
     *Restart Type:* N                                     

     This specifies the directory where output files from the
     management server will be placed. These files include cluster log
     files, process output files, and the daemon's process ID (PID)
     file. (For log files, this location can be overridden by setting
     the `FILE' parameter for `LogDestination' as discussed previously
     in this section.)

     The default value for this parameter is the directory in which
     *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. is located.

   *  `HeartbeatThreadPriority'

     This table provides type and value information for the
     HeartbeatThreadPriority management node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         string            [none]            ...
     *Restart Type:* S                                     

     Set the scheduling policy and priority of heartbeat threads for
     management and API nodes.

     The syntax for setting this parameter is shown here:

          HeartbeatThreadPriority = POLICY[, PRIORITY]

          POLICY:
            {FIFO | RR}

     When setting this parameter, you must specify a policy. This is
     one of `FIFO' (first in, first out) or `RR' (round robin). The
     policy value is followed optionally by the priority (an integer).

   *  `ExtraSendBufferMemory'

     This table provides type and value information for the
     ExtraSendBufferMemory management node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             0                 0 - 32G
     *Restart Type:* N                                     

     This parameter specifies the amount of transporter send buffer
     memory to allocate in addition to any that has been set using
     `TotalSendBufferMemory', `SendBufferMemory', or both.

     This parameter was added in MySQL Cluster NDB 7.2.14. (Bug
     #14555359)

   *  `TotalSendBufferMemory'

     This table provides type and value information for the
     TotalSendBufferMemory management node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             256K              0 - 4G
     *Restart Type:* N                                     

     This parameter is available beginning with MySQL Cluster NDB
     6.4.0. It is used to determine the total amount of memory to
     allocate on this node for shared send buffer memory among all
     configured transporters.

     If this parameter is set, its minimum permitted value is 256KB;
     the maxmimum is 4294967039. For more detailed information about
     the behavior and use of `TotalSendBufferMemory' and configuring
     send buffer memory parameters, see *Note
     mysql-cluster-config-send-buffers::.

*Note*:

After making changes in a management node's configuration, it is
necessary to perform a rolling restart of the cluster for the new
configuration to take effect.

To add new management servers to a running MySQL Cluster, it is also
necessary to perform a rolling restart of all cluster nodes after
modifying any existing `config.ini' files. For more information about
issues arising when using multiple management nodes, see *Note
mysql-cluster-limitations-multiple-nodes::.


File: manual.info,  Node: mysql-cluster-ndbd-definition,  Next: mysql-cluster-api-definition,  Prev: mysql-cluster-mgm-definition,  Up: mysql-cluster-config-file

17.3.2.6 Defining MySQL Cluster Data Nodes
..........................................

The `[ndbd]' and `[ndbd default]' sections are used to configure the
behavior of the cluster's data nodes.

`[ndbd]' and `[ndbd default]' are always used as the section names
whether you are using *Note `ndbd': mysql-cluster-programs-ndbd. or
*Note `ndbmtd': mysql-cluster-programs-ndbmtd. binaries for the data
node processes.

There are many parameters which control buffer sizes, pool sizes,
timeouts, and so forth. The only mandatory parameter is either one of
`ExecuteOnComputer' or `HostName'; this must be defined in the local
`[ndbd]' section.

The parameter `NoOfReplicas' should be defined in the `[ndbd default]'
section, as it is common to all Cluster data nodes. It is not strictly
necessary to set `NoOfReplicas', but it is good practice to set it
explicitly.

Most data node parameters are set in the `[ndbd default]' section. Only
those parameters explicitly stated as being able to set local values
are permitted to be changed in the `[ndbd]' section. Where present,
`HostName', `NodeId' and `ExecuteOnComputer' _must_ be defined in the
local `[ndbd]' section, and not in any other section of `config.ini'. In
other words, settings for these parameters are specific to one data
node.

For those parameters affecting memory usage or buffer sizes, it is
possible to use `K', `M', or `G' as a suffix to indicate units of 1024,
1024x1024, or 1024x1024x1024. (For example, `100K' means 100 x 1024 =
102400.)  Parameter names and values are currently case-sensitive.

Information about configuration parameters specific to MySQL Cluster
Disk Data tables can be found later in this section (see *Note
mysql-cluster-ndbd-definition-disk-data-parameters::).

All of these parameters also apply to *Note `ndbmtd':
mysql-cluster-programs-ndbmtd.  (the multi-threaded version of *Note
`ndbd': mysql-cluster-programs-ndbd.). Three additional data node
configuration parameters--`MaxNoOfExecutionThreads', `ThreadConfig', and
`NoOfFragmentLogParts'--apply to *Note `ndbmtd':
mysql-cluster-programs-ndbmtd. only; these have no effect when used
with *Note `ndbd': mysql-cluster-programs-ndbd. For more information,
see *Note mysql-cluster-ndbd-definition-ndbmtd-parameters::.  See also
*Note mysql-cluster-programs-ndbmtd::.

Identifying data nodes

The `NodeId' or `Id' value (that is, the data node identifier) can be
allocated on the command line when the node is started or in the
configuration file.

   *  `Id'

     This table provides type and value information for the Id data
     node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          [none]            1 - 48
     *Restart Type:*                                       
     IS                                                    

     A unique node ID is used as the node's address for all cluster
     internal messages. For data nodes, this is an integer in the range
     1 to 48 inclusive. Each node in the cluster must have a unique
     identifier.

     `NodeId' is the preferred parameter name to use when identifying
     data nodes. Although the older `Id' is still supported for
     backward compatibility, it is now deprecated, and generates a
     warning when used. `Id' is also subject to removal in a future
     MySQL Cluster release.

   *  `NodeId'

     This table provides type and value information for the NodeId data
     node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          [none]            1 - 48
     *Restart Type:*                                       
     IS                                                    

     A unique node ID is used as the node's address for all cluster
     internal messages. For data nodes, this is an integer in the range
     1 to 48 inclusive. Each node in the cluster must have a unique
     identifier.

     `NodeId' is the preferred parameter name to use when identifying
     data nodes. Although `Id' continues to be supported for backward
     compatibility, it is now deprecated, generates a warning when
     used, and is subject to removal in a future version of MySQL
     Cluster.

   *  `ExecuteOnComputer'

     This table provides type and value information for the
     ExecuteOnComputer data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         name              [none]            ...
     *Restart Type:* S                                     

     This refers to the `Id' set for one of the computers defined in a
     `[computer]' section.

   *  `HostName'

     This table provides type and value information for the HostName
     data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         name or IP        localhost         ...
                       address                             
     *Restart Type:* S                                     

     Specifying this parameter defines the hostname of the computer on
     which the data node is to reside. To specify a hostname other than
     `localhost', either this parameter or `ExecuteOnComputer' is
     required.

   *  `ServerPort'

     This table provides type and value information for the ServerPort
     data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          [none]            1 - 64K
     *Restart Type:* N                                     

     Each node in the cluster uses a port to connect to other nodes. By
     default, this port is allocated dynamically in such a way as to
     ensure that no two nodes on the same host computer receive the
     same port number, so it should normally not be necessary to
     specify a value for this parameter.

     However, if you need to be able to open specific ports in a
     firewall to permit communication between data nodes and API nodes
     (including SQL nodes), you can set this parameter to the number of
     the desired port in an `[ndbd]' section or (if you need to do this
     for multiple data nodes) the `[ndbd default]' section of the
     `config.ini' file, and then open the port having that number for
     incoming connections from SQL nodes, API nodes, or both.

     *Note*:

     Connections from data nodes to management nodes is done using the
     *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. management port
     (the management server's `PortNumber'; see *Note
     mysql-cluster-mgm-definition::) so outgoing connections to that
     port from any data nodes should always be permitted.

   *  `TcpBind_INADDR_ANY'

     Setting this parameter to `TRUE' or `1' binds `IP_ADDR_ANY' so
     that connections can be made from anywhere (for autogenerated
     connections). The default is `FALSE' (`0').

   *  `NodeGroup'

     This table provides type and value information for the NodeGroup
     data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0                           [none]            0 - 65536
     *Restart Type:*                                       
     IS                                                    

     This parameter can be used to assign a data node to a specific
     node group. It is read only when the cluster is started for the
     first time, and cannot be used to reassign a data node to a
     different node group online. It is generally not desirable to use
     this parameter in the `[ndbd default]' section of the `config.ini'
     file, and care must be taken not to assign nodes to node groups in
     such a way that an invalid numbers of nodes are assigned to any
     node groups.

     The `NodeGroup' parameter is chiefly intended for use in adding a
     new node group to a running MySQL Cluster without having to
     perform a rolling restart. For this purpose, you should set it to
     65536 (the maximum value). You are not required to set a
     `NodeGroup' value for all cluster data nodes, only for those nodes
     which are to be started and added to the cluster as a new node
     group at a later time. For more information, see *Note
     mysql-cluster-online-add-node-example::.

   *  `NoOfReplicas'

     This table provides type and value information for the
     NoOfReplicas data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           2                 1 - 4
     *Restart Type:*                                       
     IS                                                    

     This global parameter can be set only in the `[ndbd default]'
     section, and defines the number of replicas for each table stored
     in the cluster. This parameter also specifies the size of node
     groups. A node group is a set of nodes all storing the same
     information.

     Node groups are formed implicitly. The first node group is formed
     by the set of data nodes with the lowest node IDs, the next node
     group by the set of the next lowest node identities, and so on. By
     way of example, assume that we have 4 data nodes and that
     `NoOfReplicas' is set to 2. The four data nodes have node IDs 2,
     3, 4 and 5. Then the first node group is formed from nodes 2 and
     3, and the second node group by nodes 4 and 5. It is important to
     configure the cluster in such a manner that nodes in the same node
     groups are not placed on the same computer because a single
     hardware failure would cause the entire cluster to fail.

     If no node IDs are provided, the order of the data nodes will be
     the determining factor for the node group. Whether or not explicit
     assignments are made, they can be viewed in the output of the
     management client's `SHOW' command.

     The default value for `NoOfReplicas' is 2, which is the
     recommended setting in most common usage scenarios.

     The maximum possible value is 4; _currently, only the values 1 and
     2 are actually supported_.

     *Important*:

     Setting `NoOfReplicas' to 1 means that there is only a single copy
     of all Cluster data; in this case, the loss of a single data node
     causes the cluster to fail because there are no additional copies
     of the data stored by that node.

     The value for this parameter must divide evenly into the number of
     data nodes in the cluster. For example, if there are two data
     nodes, then `NoOfReplicas' must be equal to either 1 or 2, since
     2/3 and 2/4 both yield fractional values; if there are four data
     nodes, then `NoOfReplicas' must be equal to 1, 2, or 4.

   *  `DataDir'

     This table provides type and value information for the DataDir
     data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         path              .                 ...
     *Restart Type:*                                       
     IN                                                    

     This parameter specifies the directory where trace files, log
     files, pid files and error logs are placed.

     The default is the data node process working directory.

   *  `FileSystemPath'

     This table provides type and value information for the
     FileSystemPath data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         path              DataDir           ...
     *Restart Type:*                                       
     IN                                                    

     This parameter specifies the directory where all files created for
     metadata, REDO logs, UNDO logs (for Disk Data tables), and data
     files are placed. The default is the directory specified by
     `DataDir'.

     *Note*:

     This directory must exist before the *Note `ndbd':
     mysql-cluster-programs-ndbd. process is initiated.

     The recommended directory hierarchy for MySQL Cluster includes
     `/var/lib/mysql-cluster', under which a directory for the node's
     file system is created. The name of this subdirectory contains the
     node ID. For example, if the node ID is 2, this subdirectory is
     named `ndb_2_fs'.

   *  `BackupDataDir'

     This table provides type and value information for the
     BackupDataDir data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         path              [see text]        ...
     *Restart Type:*                                       
     IN                                                    

     This parameter specifies the directory in which backups are placed.

     *Important*:

     The string '`/BACKUP'' is always appended to this value. For
     example, if you set the value of `BackupDataDir' to
     `/var/lib/cluster-data', then all backups are stored under
     `/var/lib/cluster-data/BACKUP'. This also means that the
     _effective_ default backup location is the directory named
     `BACKUP' under the location specified by the `FileSystemPath'
     parameter.

* Data Memory, Index Memory, and String Memory *

`DataMemory' and `IndexMemory' are `[ndbd]' parameters specifying the
size of memory segments used to store the actual records and their
indexes. In setting values for these, it is important to understand how
`DataMemory' and `IndexMemory' are used, as they usually need to be
updated to reflect actual usage by the cluster:

   *  `DataMemory'

     This table provides type and value information for the DataMemory
     data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             80M               1M - 1024G
     *Restart Type:* N                                     

     This parameter defines the amount of space (in bytes) available
     for storing database records. The entire amount specified by this
     value is allocated in memory, so it is extremely important that
     the machine has sufficient physical memory to accommodate it.

     The memory allocated by `DataMemory' is used to store both the
     actual records and indexes. There is a 16-byte overhead on each
     record; an additional amount for each record is incurred because
     it is stored in a 32KB page with 128 byte page overhead (see
     below). There is also a small amount wasted per page due to the
     fact that each record is stored in only one page.

     For variable-size table attributes, the data is stored on separate
     datapages, allocated from `DataMemory'.  Variable-length records
     use a fixed-size part with an extra overhead of 4 bytes to
     reference the variable-size part. The variable-size part has 2
     bytes overhead plus 2 bytes per attribute.

     The maximum record size is 14000 bytes.

     The memory space defined by `DataMemory' is also used to store
     ordered indexes, which use about 10 bytes per record. Each table
     row is represented in the ordered index.  A common error among
     users is to assume that all indexes are stored in the memory
     allocated by `IndexMemory', but this is not the case: Only primary
     key and unique hash indexes use this memory; ordered indexes use
     the memory allocated by `DataMemory'. However, creating a primary
     key or unique hash index also creates an ordered index on the same
     keys, unless you specify `USING HASH' in the index creation
     statement. This can be verified by running *Note `ndb_desc -d
     DB_NAME TABLE_NAME': mysql-cluster-programs-ndb-desc. in the
     management client.

     Currently, MySQL Cluster can use a maximum of 512 MB for hash
     indexes per partition, which means in some cases it is possible to
     get `Table is full' errors in MySQL client applications even when
     *Note `ndb_mgm -e "ALL REPORT MEMORYUSAGE"':
     mysql-cluster-programs-ndb-mgm. shows significant free
     `DataMemory'. This can also pose a problem with data node restarts
     on nodes that are heavily loaded with data. You can force *Note
     `NDB': mysql-cluster. to create extra partitions for MySQL Cluster
     tables and thus have more memory available for hash indexes by
     using the `MAX_ROWS' option for *Note `CREATE TABLE':
     create-table. In general, setting `MAX_ROWS' to twice the number
     of rows that you expect to store in the table should be
     sufficient. In MySQL Cluster 7.2.3 and later, you can also use the
     `MinFreePct' configuration parameter to help avoid problems with
     node restarts. (Bug #13436216)

     The memory space allocated by `DataMemory' consists of 32KB pages,
     which are allocated to table fragments. Each table is normally
     partitioned into the same number of fragments as there are data
     nodes in the cluster. Thus, for each node, there are the same
     number of fragments as are set in `NoOfReplicas'.

     Once a page has been allocated, it is currently not possible to
     return it to the pool of free pages, except by deleting the table.
     (This also means that `DataMemory' pages, once allocated to a
     given table, cannot be used by other tables.) Performing a data
     node recovery also compresses the partition because all records
     are inserted into empty partitions from other live nodes.

     The `DataMemory' memory space also contains UNDO information: For
     each update, a copy of the unaltered record is allocated in the
     `DataMemory'. There is also a reference to each copy in the
     ordered table indexes.  Unique hash indexes are updated only when
     the unique index columns are updated, in which case a new entry in
     the index table is inserted and the old entry is deleted upon
     commit.  For this reason, it is also necessary to allocate enough
     memory to handle the largest transactions performed by
     applications using the cluster. In any case, performing a few
     large transactions holds no advantage over using many smaller
     ones, for the following reasons:

        * Large transactions are not any faster than smaller ones

        * Large transactions increase the number of operations that are
          lost and must be repeated in event of transaction failure

        * Large transactions use more memory

     The default value for `DataMemory' is 80MB; the minimum is 1MB.
     There is no maximum size, but in reality the maximum size has to
     be adapted so that the process does not start swapping when the
     limit is reached. This limit is determined by the amount of
     physical RAM available on the machine and by the amount of memory
     that the operating system may commit to any one process. 32-bit
     operating systems are generally limited to 2-4GB per process;
     64-bit operating systems can use more. For large databases, it may
     be preferable to use a 64-bit operating system for this reason.

   *  `IndexMemory'

     This table provides type and value information for the IndexMemory
     data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             18M               1M - 1T
     *Restart Type:* N                                     

     This parameter controls the amount of storage used for hash
     indexes in MySQL Cluster. Hash indexes are always used for primary
     key indexes, unique indexes, and unique constraints.  Note that
     when defining a primary key and a unique index, two indexes will
     be created, one of which is a hash index used for all tuple
     accesses as well as lock handling. It is also used to enforce
     unique constraints.

     The size of the hash index is 25 bytes per record, plus the size
     of the primary key. For primary keys larger than 32 bytes another
     8 bytes is added.

     The default value for `IndexMemory' is 18MB.  The minimum is 1MB.

   *  `StringMemory'

     This table provides type and value information for the
     StringMemory data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         % or bytes        25                0 - 4G
     NDB 7.2.1         % or bytes        25                0 - 4G
     *Restart Type:* S                                     

     This parameter determines how much memory is allocated for strings
     such as table names, and is specified in an `[ndbd]' or `[ndbd
     default]' section of the `config.ini' file. A value between `0'
     and `100' inclusive is interpreted as a percent of the maximum
     default value, which is calculated based on a number of factors
     including the number of tables, maximum table name size, maximum
     size of `.FRM' files, `MaxNoOfTriggers', maximum column name size,
     and maximum default column value.

     A value greater than `100' is interpreted as a number of bytes.

     The default value is 25--that is, 25 percent of the default
     maximum.

     Under most circumstances, the default value should be sufficient,
     but when you have a great many Cluster tables (1000 or more), it
     is possible to get Error 773 `Out of string memory, please modify
     StringMemory config parameter: Permanent error: Schema error', in
     which case you should increase this value.  `25' (25 percent) is
     not excessive, and should prevent this error from recurring in all
     but the most extreme conditions.

The following example illustrates how memory is used for a table.
Consider this table definition:

     CREATE TABLE example (
       a INT NOT NULL,
       b INT NOT NULL,
       c INT NOT NULL,
       PRIMARY KEY(a),
       UNIQUE(b)
     ) ENGINE=NDBCLUSTER;

For each record, there are 12 bytes of data plus 12 bytes overhead.
Having no nullable columns saves 4 bytes of overhead.  In addition, we
have two ordered indexes on columns `a' and `b' consuming roughly 10
bytes each per record. There is a primary key hash index on the base
table using roughly 29 bytes per record. The unique constraint is
implemented by a separate table with `b' as primary key and `a' as a
column. This other table consumes an additional 29 bytes of index
memory per record in the `example' table as well 8 bytes of record data
plus 12 bytes of overhead.

Thus, for one million records, we need 58MB for index memory to handle
the hash indexes for the primary key and the unique constraint. We also
need 64MB for the records of the base table and the unique index table,
plus the two ordered index tables.

You can see that hash indexes takes up a fair amount of memory space;
however, they provide very fast access to the data in return. They are
also used in MySQL Cluster to handle uniqueness constraints.

Currently, the only partitioning algorithm is hashing and ordered
indexes are local to each node. Thus, ordered indexes cannot be used to
handle uniqueness constraints in the general case.

An important point for both `IndexMemory' and `DataMemory' is that the
total database size is the sum of all data memory and all index memory
for each node group. Each node group is used to store replicated
information, so if there are four nodes with two replicas, there will
be two node groups. Thus, the total data memory available is 2 x
`DataMemory' for each data node.

It is highly recommended that `DataMemory' and `IndexMemory' be set to
the same values for all nodes. Data distribution is even over all nodes
in the cluster, so the maximum amount of space available for any node
can be no greater than that of the smallest node in the cluster.

`DataMemory' and `IndexMemory' can be changed, but decreasing either of
these can be risky; doing so can easily lead to a node or even an
entire MySQL Cluster that is unable to restart due to there being
insufficient memory space. Increasing these values should be
acceptable, but it is recommended that such upgrades are performed in
the same manner as a software upgrade, beginning with an update of the
configuration file, and then restarting the management server followed
by restarting each data node in turn.

Beginning with MySQL Cluster NDB 7.2.3, a proportion (5% by default) of
data node resources including `DataMemory' and `IndexMemory' is kept in
reserve to insure that the data node does not exhaust its memory when
performing a restart. This can be adjusted using the `MinFreePct' data
node configuration parameter (default 5) introduced in the same version
of MySQL Cluster.

This table provides type and value information for the MinFreePct data
node configuration parameter

Effective Version  Type/Units         Default            Range/Values
NDB 7.2.0          unsigned           5                  0 - 100
NDB 7.2.3          unsigned           5                  0 - 100
*Restart Type:* N                                        

Updates do not increase the amount of index memory used. Inserts take
effect immediately; however, rows are not actually deleted until the
transaction is committed.

Transaction parameters

The next few `[ndbd]' parameters that we discuss are important because
they affect the number of parallel transactions and the sizes of
transactions that can be handled by the system.
`MaxNoOfConcurrentTransactions' sets the number of parallel
transactions possible in a node.  `MaxNoOfConcurrentOperations' sets
the number of records that can be in update phase or locked
simultaneously.

Both of these parameters (especially `MaxNoOfConcurrentOperations') are
likely targets for users setting specific values and not using the
default value. The default value is set for systems using small
transactions, to ensure that these do not use excessive memory.

`MaxDMLOperationsPerTransaction' sets the maximum number of DML
operations that can be performed in a given transaction.

   *  `MaxNoOfConcurrentTransactions'

     This table provides type and value information for the
     MaxNoOfConcurrentTransactions data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           4096              32 - 4G
     *Restart Type:* S                                     

     Each cluster data node requires a transaction record for each
     active transaction in the cluster. The task of coordinating
     transactions is distributed among all of the data nodes. The total
     number of transaction records in the cluster is the number of
     transactions in any given node times the number of nodes in the
     cluster.

     Transaction records are allocated to individual MySQL servers.
     Each connection to a MySQL server requires at least one
     transaction record, plus an additional transaction object per
     table accessed by that connection. This means that a reasonable
     minimum for the total number of transactions in the cluster can be
     expressed as

          TotalNoOfConcurrentTransactions =
              (maximum number of tables accessed in any single transaction + 1)
              * number of cluster SQL nodes

     Suppose that there are 10 SQL nodes using the cluster. A single
     join involving 10 tables requires 11 transaction records; if there
     are 10 such joins in a transaction, then 10 * 11 = 110 transaction
     records are required for this transaction, per MySQL server, or
     110 * 10 = 1100 transaction records total. Each data node can be
     expected to handle TotalNoOfConcurrentTransactions / number of data
     nodes. For a MySQL Cluster having 4 data nodes, this would mean
     setting `MaxNoOfConcurrentTransactions' on each data node to 1100
     / 4 = 275. In addition, you should provide for failure recovery by
     insuring that a single node group can accommodate all concurrent
     transactions; in other words, that each data node's
     MaxNoOfConcurrentTransactions is sufficient to cover a number of
     transaction equal to TotalNoOfConcurrentTransactions / number of
     node groups. If this cluster has a single node group, then
     `MaxNoOfConcurrentTransactions' should be set to 1100 (the same as
     the total number of concurrent transactions for the entire
     cluster).

     In addition, each transaction involves at least one operation; for
     this reason, the value set for `MaxNoOfConcurrentTransactions'
     should always be no more than the value of
     `MaxNoOfConcurrentOperations'.

     This parameter must be set to the same value for all cluster data
     nodes. This is due to the fact that, when a data node fails, the
     oldest surviving node re-creates the transaction state of all
     transactions that were ongoing in the failed node.

     Changing the value of `MaxNoOfConcurrentTransactions' requires a
     complete shutdown and restart of the cluster.

     The default value is 4096.

   *  `MaxNoOfConcurrentOperations'

     This table provides type and value information for the
     MaxNoOfConcurrentOperations data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           32K               32 - 4G
     *Restart Type:* N                                     

     It is a good idea to adjust the value of this parameter according
     to the size and number of transactions. When performing
     transactions of only a few operations each and not involving a
     great many records, there is no need to set this parameter very
     high. When performing large transactions involving many records
     need to set this parameter higher.

     Records are kept for each transaction updating cluster data, both
     in the transaction coordinator and in the nodes where the actual
     updates are performed. These records contain state information
     needed to find UNDO records for rollback, lock queues, and other
     purposes.

     This parameter should be set at a minimum to the number of records
     to be updated simultaneously in transactions, divided by the
     number of cluster data nodes. For example, in a cluster which has
     four data nodes and which is expected to handle one million
     concurrent updates using transactions, you should set this value
     to 1000000 / 4 = 250000. To help provide resiliency against
     failures, it is suggested that you set this parameter to a value
     that is high enough to permit an individual data node to handle
     the load for its node group. In other words, you should set the
     value equal to `total number of concurrent operations / number of
     node groups'. (In the case where there is a single node group,
     this is the same as the total number of concurrent operations for
     the entire cluster.)

     Because each transaction always involves at least one operation,
     the value of `MaxNoOfConcurrentOperations' should always be
     greater than or equal to the value of
     `MaxNoOfConcurrentTransactions'.

     Read queries which set locks also cause operation records to be
     created. Some extra space is allocated within individual nodes to
     accommodate cases where the distribution is not perfect over the
     nodes.

     When queries make use of the unique hash index, there are actually
     two operation records used per record in the transaction. The
     first record represents the read in the index table and the second
     handles the operation on the base table.

     The default value is 32768.

     This parameter actually handles two values that can be configured
     separately. The first of these specifies how many operation
     records are to be placed with the transaction coordinator. The
     second part specifies how many operation records are to be local
     to the database.

     A very large transaction performed on an eight-node cluster
     requires as many operation records in the transaction coordinator
     as there are reads, updates, and deletes involved in the
     transaction. However, the operation records of the are spread over
     all eight nodes. Thus, if it is necessary to configure the system
     for one very large transaction, it is a good idea to configure the
     two parts separately.  `MaxNoOfConcurrentOperations' will always
     be used to calculate the number of operation records in the
     transaction coordinator portion of the node.

     It is also important to have an idea of the memory requirements
     for operation records. These consume about 1KB per record.

   *  `MaxNoOfLocalOperations'

     This table provides type and value information for the
     MaxNoOfLocalOperations data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           UNDEFINED         32 - 4G
     *Restart Type:* N                                     

     By default, this parameter is calculated as 1.1 x
     `MaxNoOfConcurrentOperations'.  This fits systems with many
     simultaneous transactions, none of them being very large. If there
     is a need to handle one very large transaction at a time and there
     are many nodes, it is a good idea to override the default value by
     explicitly specifying this parameter.

   *  `MaxDMLOperationsPerTransaction'

     This table provides type and value information for the
     MaxDMLOperationsPerTransaction data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         operations (DML)  4294967295        32 - 4294967295
     *Restart Type:* N                                     

     This parameter limits the size of a transaction. The transaction
     is aborted if it requires more than this many DML operations. The
     minimum number of operations per transaction is 32; however, you
     can set `MaxDMLOperationsPerTransaction' to 0 to disable any
     limitation on the number of DML operations per transaction. The
     maximum (and default) is 4294967295.

Transaction temporary storage

The next set of `[ndbd]' parameters is used to determine temporary
storage when executing a statement that is part of a Cluster
transaction. All records are released when the statement is completed
and the cluster is waiting for the commit or rollback.

The default values for these parameters are adequate for most
situations. However, users with a need to support transactions
involving large numbers of rows or operations may need to increase
these values to enable better parallelism in the system, whereas users
whose applications require relatively small transactions can decrease
the values to save memory.

   *  `MaxNoOfConcurrentIndexOperations'

     This table provides type and value information for the
     MaxNoOfConcurrentIndexOperations data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           8K                0 - 4G
     *Restart Type:* N                                     

     For queries using a unique hash index, another temporary set of
     operation records is used during a query's execution phase. This
     parameter sets the size of that pool of records.  Thus, this
     record is allocated only while executing a part of a query. As
     soon as this part has been executed, the record is released. The
     state needed to handle aborts and commits is handled by the normal
     operation records, where the pool size is set by the parameter
     `MaxNoOfConcurrentOperations'.

     The default value of this parameter is 8192. Only in rare cases of
     extremely high parallelism using unique hash indexes should it be
     necessary to increase this value. Using a smaller value is
     possible and can save memory if the DBA is certain that a high
     degree of parallelism is not required for the cluster.

   *  `MaxNoOfFiredTriggers'

     This table provides type and value information for the
     MaxNoOfFiredTriggers data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           4000              0 - 4G
     *Restart Type:* N                                     

     The default value of `MaxNoOfFiredTriggers' is 4000, which is
     sufficient for most situations. In some cases it can even be
     decreased if the DBA feels certain the need for parallelism in the
     cluster is not high.

     A record is created when an operation is performed that affects a
     unique hash index. Inserting or deleting a record in a table with
     unique hash indexes or updating a column that is part of a unique
     hash index fires an insert or a delete in the index table. The
     resulting record is used to represent this index table operation
     while waiting for the original operation that fired it to
     complete. This operation is short-lived but can still require a
     large number of records in its pool for situations with many
     parallel write operations on a base table containing a set of
     unique hash indexes.

   *  `TransactionBufferMemory'

     This table provides type and value information for the
     TransactionBufferMemory data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             1M                1K - 4G
     *Restart Type:* N                                     

     The memory affected by this parameter is used for tracking
     operations fired when updating index tables and reading unique
     indexes. This memory is used to store the key and column
     information for these operations. It is only very rarely that the
     value for this parameter needs to be altered from the default.

     The default value for `TransactionBufferMemory' is 1MB.

     Normal read and write operations use a similar buffer, whose usage
     is even more short-lived. The compile-time parameter
     `ZATTRBUF_FILESIZE' (found in
     `ndb/src/kernel/blocks/Dbtc/Dbtc.hpp') set to 4000 x 128 bytes
     (500KB). A similar buffer for key information, `ZDATABUF_FILESIZE'
     (also in `Dbtc.hpp') contains 4000 x 16 = 62.5KB of buffer space.
     `Dbtc' is the module that handles transaction coordination.

Scans and buffering

There are additional `[ndbd]' parameters in the `Dblqh' module (in
`ndb/src/kernel/blocks/Dblqh/Dblqh.hpp') that affect reads and updates.
These include `ZATTRINBUF_FILESIZE', set by default to 10000 x 128
bytes (1250KB) and `ZDATABUF_FILE_SIZE', set by default to 10000*16
bytes (roughly 156KB) of buffer space. To date, there have been neither
any reports from users nor any results from our own extensive tests
suggesting that either of these compile-time limits should be increased.

   *  `MaxNoOfConcurrentScans'

     This table provides type and value information for the
     MaxNoOfConcurrentScans data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           256               2 - 500
     *Restart Type:* N                                     

     This parameter is used to control the number of parallel scans
     that can be performed in the cluster. Each transaction coordinator
     can handle the number of parallel scans defined for this
     parameter. Each scan query is performed by scanning all partitions
     in parallel. Each partition scan uses a scan record in the node
     where the partition is located, the number of records being the
     value of this parameter times the number of nodes. The cluster
     should be able to sustain `MaxNoOfConcurrentScans' scans
     concurrently from all nodes in the cluster.

     Scans are actually performed in two cases. The first of these
     cases occurs when no hash or ordered indexes exists to handle the
     query, in which case the query is executed by performing a full
     table scan. The second case is encountered when there is no hash
     index to support the query but there is an ordered index. Using
     the ordered index means executing a parallel range scan. The order
     is kept on the local partitions only, so it is necessary to
     perform the index scan on all partitions.

     The default value of `MaxNoOfConcurrentScans' is 256. The maximum
     value is 500.

   *  `MaxNoOfLocalScans'

     This table provides type and value information for the
     MaxNoOfLocalScans data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           UNDEFINED         32 - 4G
     *Restart Type:* N                                     

     Specifies the number of local scan records if many scans are not
     fully parallelized. In MySQL Cluster NDB 7.2.0 and later, when the
     number of local scan records is not provided, it is calculated as
     4 times the product of `MaxNoOfConcurrentScans' and the number of
     data nodes in the system. (Previously, it was calculated as the
     product of `MaxNoOfConcurrentScans' and the number of data nodes.)
     The minimum value is 32.

   *  `BatchSizePerLocalScan'

     This table provides type and value information for the
     BatchSizePerLocalScan data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           64                1 - 992
     NDB 7.2.1         integer           256               1 - 992
     *Restart Type:* N                                     

     This parameter is used to calculate the number of lock records
     used to handle concurrent scan operations.

     `BatchSizePerLocalScan' has a strong connection to the `BatchSize'
     defined in the SQL nodes.

   *  `LongMessageBuffer'

     This table provides type and value information for the
     LongMessageBuffer data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             4M                512K - 4G
     *Restart Type:* N                                     

     This is an internal buffer used for passing messages within
     individual nodes and between nodes. The default is 4MB.

     This parameter seldom needs to be changed from the default.

   *  `MaxParallelScansPerFragment'

     This table provides type and value information for the
     MaxParallelScansPerFragment data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             256               1 - 1G
     *Restart Type:* N                                     

     It is possible to configure the maximum number of parallel scans
     (`TUP' scans and `TUX' scans) allowed before they begin queuing
     for serial handling. You can increase this to take advantage of
     any unused CPU when performing large number of scans in parallel
     and improve their performance.

     Beginning with MySQL Cluster NDB 7.2.0, the default value for this
     parameter was increased from 32 to 256.

* Memory Allocation *

`MaxAllocate'

This table provides type and value information for the MaxAllocate data
node configuration parameter

Effective Version  Type/Units         Default            Range/Values
NDB 7.2.0          unsigned           32M                1M - 1G
*Restart Type:* N                                        

This is the maximum size of the memory unit to use when allocating
memory for tables. In cases where *Note `NDB': mysql-cluster. gives
`Out of memory' errors, but it is evident by examining the cluster logs
or the output of `DUMP 1000' (see `DUMP 1000'
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals-dump-command-1000.html))
that all available memory has not yet been used, you can increase the
value of this parameter (or `MaxNoOfTables', or both) to cause *Note
`NDB': mysql-cluster. to make sufficient memory available.

* Hash Map Size *

`DefaultHashMapSize'

This table provides type and value information for the
DefaultHashMapSize data node configuration parameter

Effective Version  Type/Units         Default            Range/Values
NDB 7.2.0          LDM threads        240                0 - 3840
NDB 7.2.11         LDM threads        3840               0 - 3840
*Restart Type:* N                                        

MySQL Cluster NDB 7.2.7 and later use a larger default table hash map
size (3840) than in previous releases (240). Beginning with MySQL
Cluster NDB 7.2.11, the size of the table hash maps used by *Note
`NDB': mysql-cluster. is configurable using this parameter; previously
this value was hard-coded.  `DefaultHashMapSize' can take any of three
possible values (0, 240, 3840). These values and their effects are
described in the following table:

DefaultHashMapSize parameter values and their effects

Value          Description / Effect
`0'            Use the lowest value set, if any, for this parameter
               among all data nodes and API nodes in the cluster; if it
               is not set on any data or API node, use the default value.
`240'          Original hash map size, used by default in all MySQL
               Cluster releases prior to MySQL Cluster NDB 7.2.7.
`3840'         Larger hash map size as used by default in MySQL Cluster
               NDB 7.2.7 and later

The primary intended use for this parameter is to facilitate upgrades
and especially downgrades between MySQL Cluster NDB 7.2.7 and later
MySQL Cluster versions, in which the larger hash map size (3840) is the
default, and earlier releases (in which the default was 240), due to
the fact that this change is not otherwise backward compatible (Bug
#14800539). By setting this parameter to 240 prior to performing an
upgrade from an older version where this value is in use, you can cause
the cluster to continue using the smaller size for table hash maps, in
which case the tables remain compatible with earlier versions following
the upgrade. `DefaultHashMapSize' can be set for individual data nodes,
API nodes, or both, but setting it once only, in the `[ndbd default]'
section of the `config.ini' file, is the recommended practice.

After increasing this parameter, to have existing tables to take
advantage of the new size, you can run *Note `ALTER TABLE ...
REORGANIZE PARTITION': alter-table-partition-operations. on them, after
which they can use the larger hash map size. This is in addition to
performing a rolling restart, which makes the larger hash maps
available to new tables, but does not enable existing tables to use
them.

Decreasing this parameter online after any tables have been created or
modified with `DefaultHashMapSize' equal to 3840 is not currently
supported.

Logging and checkpointing

The following `[ndbd]' parameters control log and checkpoint behavior.

   *  `NoOfFragmentLogFiles'

     This table provides type and value information for the
     NoOfFragmentLogFiles data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           16                3 - 4G
     *Restart Type:*                                       
     IN                                                    

     This parameter sets the number of REDO log files for the node, and
     thus the amount of space allocated to REDO logging. Because the
     REDO log files are organized in a ring, it is extremely important
     that the first and last log files in the set (sometimes referred
     to as the `head' and `tail' log files, respectively) do not meet.
     When these approach one another too closely, the node begins
     aborting all transactions encompassing updates due to a lack of
     room for new log records.

     A `REDO' log record is not removed until the required number of
     local checkpoints has been completed since that log record was
     inserted. (In MySQL Cluster NDB 7.2, only 2 local checkpoints are
     necessary). Checkpointing frequency is determined by its own set
     of configuration parameters discussed elsewhere in this chapter.

     The default parameter value is 16, which by default means 16 sets
     of 4 16MB files for a total of 1024MB. The size of the individual
     log files is configurable using the `FragmentLogFileSize'
     parameter. In scenarios requiring a great many updates, the value
     for `NoOfFragmentLogFiles' may need to be set as high as 300 or
     even higher to provide sufficient space for REDO logs.

     If the checkpointing is slow and there are so many writes to the
     database that the log files are full and the log tail cannot be
     cut without jeopardizing recovery, all updating transactions are
     aborted with internal error code 410 (`Out of log file space
     temporarily'). This condition prevails until a checkpoint has
     completed and the log tail can be moved forward.

     *Important*:

     This parameter cannot be changed `on the fly'; you must restart
     the node using `--initial'. If you wish to change this value for
     all data nodes in a running cluster, you can do so using a rolling
     node restart (using `--initial' when starting each data node).

   *  `FragmentLogFileSize'

     This table provides type and value information for the
     FragmentLogFileSize data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             16M               4M - 1G
     *Restart Type:*                                       
     IN                                                    

     Setting this parameter enables you to control directly the size of
     redo log files. This can be useful in situations when MySQL
     Cluster is operating under a high load and it is unable to close
     fragment log files quickly enough before attempting to open new
     ones (only 2 fragment log files can be open at one time);
     increasing the size of the fragment log files gives the cluster
     more time before having to open each new fragment log file. The
     default value for this parameter is 16M.

     For more information about fragment log files, see the description
     for `NoOfFragmentLogFiles'.

   *  `InitFragmentLogFiles'

     This table provides type and value information for the
     InitFragmentLogFiles data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         [see values]      SPARSE            SPARSE, FULL
     *Restart Type:*                                       
     IN                                                    

     By default, fragment log files are created sparsely when
     performing an initial start of a data node--that is, depending on
     the operating system and file system in use, not all bytes are
     necessarily written to disk. However, it is possible to override
     this behavior and force all bytes to be written, regardless of the
     platform and file system type being used, by means of this
     parameter.  `InitFragmentLogFiles' takes either of two values:

        * `SPARSE'. Fragment log files are created sparsely. This is
          the default value.

        * `FULL'. Force all bytes of the fragment log file to be
          written to disk.

     Depending on your operating system and file system, setting
     `InitFragmentLogFiles=FULL' may help eliminate I/O errors on
     writes to the REDO log.

   *  `MaxNoOfOpenFiles'

     This table provides type and value information for the
     MaxNoOfOpenFiles data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          0                 20 - 4G
     *Restart Type:* N                                     

     This parameter sets a ceiling on how many internal threads to
     allocate for open files. _Any situation requiring a change in this
     parameter should be reported as a bug_.

     The default value is 0. However, the minimum value to which this
     parameter can be set is 20.

   *  `InitialNoOfOpenFiles'

     This table provides type and value information for the
     InitialNoOfOpenFiles data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         files             27                20 - 4G
     *Restart Type:* N                                     

     This parameter sets the initial number of internal threads to
     allocate for open files.

     The default value is 27.

   *  `MaxNoOfSavedMessages'

     This table provides type and value information for the
     MaxNoOfSavedMessages data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           25                0 - 4G
     *Restart Type:* N                                     

     This parameter sets the maximum number of trace files that are
     kept before overwriting old ones. Trace files are generated when,
     for whatever reason, the node crashes.

     The default is 25 trace files.

   *  `MaxLCPStartDelay'

     This table provides type and value information for the
     MaxLCPStartDelay data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         seconds           0                 0 - 600
     *Restart Type:* N                                     

     In parallel data node recovery, only table data is actually copied
     and synchronized in parallel; synchronization of metadata such as
     dictionary and checkpoint information is done in a serial fashion.
     In addition, recovery of dictionary and checkpoint information
     cannot be executed in parallel with performing of local
     checkpoints. This means that, when starting or restarting many
     data nodes concurrently, data nodes may be forced to wait while a
     local checkpoint is performed, which can result in longer node
     recovery times.

     It is possible to force a delay in the local checkpoint to permit
     more (and possibly all) data nodes to complete metadata
     synchronization; once each data node's metadata synchronization is
     complete, all of the data nodes can recover table data in
     parallel, even while the local checkpoint is being executed. To
     force such a delay, set `MaxLCPStartDelay', which determines the
     number of seconds the cluster can wait to begin a local checkpoint
     while data nodes continue to synchronize metadata. This parameter
     should be set in the `[ndbd default]' section of the `config.ini'
     file, so that it is the same for all data nodes. The maximum value
     is 600; the default is 0.

Metadata objects

The next set of `[ndbd]' parameters defines pool sizes for metadata
objects, used to define the maximum number of attributes, tables,
indexes, and trigger objects used by indexes, events, and replication
between clusters.  Note that these act merely as `suggestions' to the
cluster, and any that are not specified revert to the default values
shown.

   *  `MaxNoOfAttributes'

     This table provides type and value information for the
     MaxNoOfAttributes data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           1000              32 - 4G
     *Restart Type:* N                                     

     This parameter sets a suggested maximum number of attributes that
     can be defined in the cluster; like `MaxNoOfTables', it is not
     intended to function as a hard upper limit.

     (In older MySQL Cluster releases, this parameter was sometimes
     treated as a hard limit for certain operations.  This caused
     problems with MySQL Cluster Replication, when it was possible to
     create more tables than could be replicated, and sometimes led to
     confusion when it was possible [or not possible, depending on the
     circumstances] to create more than `MaxNoOfAttributes' attributes.)

     The default value is 1000, with the minimum possible value being
     32. The maximum is 4294967039. Each attribute consumes around 200
     bytes of storage per node due to the fact that all metadata is
     fully replicated on the servers.

     When setting `MaxNoOfAttributes', it is important to prepare in
     advance for any *Note `ALTER TABLE': alter-table. statements that
     you might want to perform in the future. This is due to the fact,
     during the execution of *Note `ALTER TABLE': alter-table. on a
     Cluster table, 3 times the number of attributes as in the original
     table are used, and a good practice is to permit double this
     amount. For example, if the MySQL Cluster table having the
     greatest number of attributes (GREATEST_NUMBER_OF_ATTRIBUTES) has
     100 attributes, a good starting point for the value of
     `MaxNoOfAttributes' would be `6 * GREATEST_NUMBER_OF_ATTRIBUTES =
     600'.

     You should also estimate the average number of attributes per
     table and multiply this by `MaxNoOfTables'. If this value is
     larger than the value obtained in the previous paragraph, you
     should use the larger value instead.

     Assuming that you can create all desired tables without any
     problems, you should also verify that this number is sufficient by
     trying an actual *Note `ALTER TABLE': alter-table. after
     configuring the parameter. If this is not successful, increase
     `MaxNoOfAttributes' by another multiple of `MaxNoOfTables' and
     test it again.

   *  `MaxNoOfTables'

     This table provides type and value information for the
     MaxNoOfTables data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           128               8 - 20320
     *Restart Type:* N                                     

     A table object is allocated for each table and for each unique
     hash index in the cluster. This parameter sets a suggested maximum
     number of table objects for the cluster as a whole; like
     `MaxNoOfAttributes', it is not intended to function as a hard
     upper limit.

     (In older MySQL Cluster releases, this parameter was sometimes
     treated as a hard limit for certain operations.  This caused
     problems with MySQL Cluster Replication, when it was possible to
     create more tables than could be replicated, and sometimes led to
     confusion when it was possible [or not possible, depending on the
     circumstances] to create more than `MaxNoOfTables' tables.)

     For each attribute that has a *Note `BLOB': blob. data type an
     extra table is used to store most of the *Note `BLOB': blob. data.
     These tables also must be taken into account when defining the
     total number of tables.

     The default value of this parameter is 128. The minimum is 8 and
     the maximum is 20320. Each table object consumes approximately
     20KB per node.

     *Note*:

     The sum of `MaxNoOfTables', `MaxNoOfOrderedIndexes', and
     `MaxNoOfUniqueHashIndexes' must not exceed `2^32 - 2' (4294967294).

   *  `MaxNoOfOrderedIndexes'

     This table provides type and value information for the
     MaxNoOfOrderedIndexes data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           128               0 - 4G
     *Restart Type:* N                                     

     For each ordered index in the cluster, an object is allocated
     describing what is being indexed and its storage segments. By
     default, each index so defined also defines an ordered index. Each
     unique index and primary key has both an ordered index and a hash
     index.  `MaxNoOfOrderedIndexes' sets the total number of ordered
     indexes that can be in use in the system at any one time.

     The default value of this parameter is 128. Each index object
     consumes approximately 10KB of data per node.

     *Note*:

     The sum of `MaxNoOfTables', `MaxNoOfOrderedIndexes', and
     `MaxNoOfUniqueHashIndexes' must not exceed `2^32 - 2' (4294967294).

   *  `MaxNoOfUniqueHashIndexes'

     This table provides type and value information for the
     MaxNoOfUniqueHashIndexes data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           64                0 - 4G
     *Restart Type:* N                                     

     For each unique index that is not a primary key, a special table
     is allocated that maps the unique key to the primary key of the
     indexed table. By default, an ordered index is also defined for
     each unique index. To prevent this, you must specify the `USING
     HASH' option when defining the unique index.

     The default value is 64. Each index consumes approximately 15KB
     per node.

     *Note*:

     The sum of `MaxNoOfTables', `MaxNoOfOrderedIndexes', and
     `MaxNoOfUniqueHashIndexes' must not exceed `2^32 - 2' (4294967294).

   *  `MaxNoOfTriggers'

     This table provides type and value information for the
     MaxNoOfTriggers data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           768               0 - 4G
     *Restart Type:* N                                     

     Internal update, insert, and delete triggers are allocated for
     each unique hash index. (This means that three triggers are
     created for each unique hash index.) However, an _ordered_ index
     requires only a single trigger object. Backups also use three
     trigger objects for each normal table in the cluster.

     Replication between clusters also makes use of internal triggers.

     This parameter sets the maximum number of trigger objects in the
     cluster.

     The default value is 768.

   *  `MaxNoOfIndexes'

     This parameter is deprecated and subject to removal in a future
     version of MySQL Cluster. You should use `MaxNoOfOrderedIndexes'
     and `MaxNoOfUniqueHashIndexes' instead.

     This parameter is used only by unique hash indexes. There needs to
     be one record in this pool for each unique hash index defined in
     the cluster.

     The default value of this parameter is 128.

   *  `MaxNoOfSubscriptions'

     This table provides type and value information for the
     MaxNoOfSubscriptions data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          0                 0 - 4G
     *Restart Type:* N                                     

     Each *Note `NDB': mysql-cluster. table in a MySQL Cluster requires
     a subscription in the NDB kernel. For some NDB API applications,
     it may be necessary or desirable to change this parameter.
     However, for normal usage with MySQL servers acting as SQL nodes,
     there is not any need to do so.

     The default value for `MaxNoOfSubscriptions' is 0, which is
     treated as equal to `MaxNoOfTables'. Each subscription consumes
     108 bytes.

   *  `MaxNoOfSubscribers'

     This table provides type and value information for the
     MaxNoOfSubscribers data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          0                 0 - 4G
     *Restart Type:* N                                     

     This parameter is of interest only when using MySQL Cluster
     Replication. The default value is 0, which is treated as `2 *
     MaxNoOfTables'; that is, there is one subscription per *Note
     `NDB': mysql-cluster. table for each of two MySQL servers (one
     acting as the replication master and the other as the slave). Each
     subscriber uses 16 bytes of memory.

     When using circular replication, multi-master replication, and
     other replication setups involving more than 2 MySQL servers, you
     should increase this parameter to the number of *Note `mysqld':
     mysqld. processes included in replication (this is often, but not
     always, the same as the number of clusters). For example, if you
     have a circular replication setup using three MySQL Clusters, with
     one *Note `mysqld': mysqld. attached to each cluster, and each of
     these *Note `mysqld': mysqld. processes acts as a master and as a
     slave, you should set `MaxNoOfSubscribers' equal to `3 *
     MaxNoOfTables'.

     For more information, see *Note mysql-cluster-replication::.

   *  `MaxNoOfConcurrentSubOperations'

     This table provides type and value information for the
     MaxNoOfConcurrentSubOperations data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          256               0 - 4G
     *Restart Type:* N                                     

     This parameter sets a ceiling on the number of operations that can
     be performed by all API nodes in the cluster at one time. The
     default value (256) is sufficient for normal operations, and might
     need to be adjusted only in scenarios where there are a great many
     API nodes each performing a high volume of operations concurrently.

Boolean parameters

The behavior of data nodes is also affected by a set of `[ndbd]'
parameters taking on boolean values.  These parameters can each be
specified as `TRUE' by setting them equal to `1' or `Y', and as `FALSE'
by setting them equal to `0' or `N'.

   *  `LockPagesInMainMemory'

     This table provides type and value information for the
     LockPagesInMainMemory data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         numeric           0                 0 - 2
     *Restart Type:* N                                     

     For a number of operating systems, including Solaris and Linux, it
     is possible to lock a process into memory and so avoid any
     swapping to disk. This can be used to help guarantee the cluster's
     real-time characteristics.

     This parameter takes one of the integer values `0', `1', or `2',
     which act as shown in the following list:

        * `0': Disables locking. This is the default value.

        * `1': Performs the lock after allocating memory for the
          process.

        * `2': Performs the lock before memory for the process is
          allocated.

     If the operating system is not configured to permit unprivileged
     users to lock pages, then the data node process making use of this
     parameter may have to be run as system root.
     (`LockPagesInMainMemory' uses the `mlockall' function. From Linux
     kernel 2.6.9, unprivileged users can lock memory as limited by
     `max locked memory'. For more information, see `ulimit -l' and
     `http://linux.die.net/man/2/mlock').

     *Note*:

     In older MySQL Cluster releases, this parameter was a Boolean. `0'
     or `false' was the default setting, and disabled locking.  `1' or
     `true' enabled locking of the process after its memory was
     allocated. In MySQL Cluster NDB 7.2, using `true' or `false' as
     the value of this parameter causes an error.

     *Important*:

     Beginning with `glibc' 2.10, `glibc' uses per-thread arenas to
     reduce lock contention on a shared pool, which consumes real
     memory. In general, a data node process does not need per-thread
     arenas, since it does not perform any memory allocation after
     startup. (This difference in allocators does not appear to affect
     performance significantly.)

     The `glibc' behavior is intended to be configurable via the
     `MALLOC_ARENA_MAX' environment variable, but a bug in this this
     mechanism prior to `glibc' 2.16 meant that this variable could not
     be set to less than 8, so that the wasted memory could not be
     reclaimed. (Bug #15907219; see also
     `http://sourceware.org/bugzilla/show_bug.cgi?id=13137' for more
     information concerning this issue.)

     One possible workaround for this problem is to use the
     `LD_PRELOAD' environment variable to preload a `jemalloc' memory
     allocation library to take the place of that supplied with `glibc'.

   *  `StopOnError'

     This table provides type and value information for the StopOnError
     data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         boolean           true              true, false
     *Restart Type:* N                                     

     This parameter specifies whether a data node process should exit
     or perform an automatic restart when an error condition is
     encountered.

     This feature is enabled by default.

   *  `CrashOnCorruptedTuple'

     This table provides type and value information for the
     CrashOnCorruptedTuple data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         boolean           false             true, false
     NDB 7.2.1         boolean           true              true, false
     *Restart Type:* S                                     

     When this parameter is enabled, it forces a data node to shut down
     whenever it encounters a corrupted tuple. In MySQL Cluster NDB
     7.2.1 and later, it is enabled by default. This is a change from
     MySQL Cluster NDB 7.0 and MySQL Cluster NDB 7.1, where it was
     disabled by default.

   *  `Diskless'

     This table provides type and value information for the Diskless
     data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         true|false (1|0)  false             true, false
     *Restart Type:*                                       
     IS                                                    

     It is possible to specify MySQL Cluster tables as _diskless_,
     meaning that tables are not checkpointed to disk and that no
     logging occurs. Such tables exist only in main memory. A
     consequence of using diskless tables is that neither the tables
     nor the records in those tables survive a crash. However, when
     operating in diskless mode, it is possible to run *Note `ndbd':
     mysql-cluster-programs-ndbd. on a diskless computer.

     *Important*:

     This feature causes the _entire_ cluster to operate in diskless
     mode.

     When this feature is enabled, Cluster online backup is disabled.
     In addition, a partial start of the cluster is not possible.

     `Diskless' is disabled by default.

   *  `ODirect'

     This table provides type and value information for the ODirect
     data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         boolean           false             true, false
     *Restart Type:* N                                     

     Enabling this parameter causes *Note `NDB': mysql-cluster. to
     attempt using `O_DIRECT' writes for LCP, backups, and redo logs,
     often lowering `kswapd' and CPU usage. When using MySQL Cluster on
     Linux, enable `ODirect' if you are using a 2.6 or later kernel.

     `ODirect' is disabled by default.

   *  `RestartOnErrorInsert'

     This table provides type and value information for the
     RestartOnErrorInsert data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         error code        2                 0 - 4
     *Restart Type:* N                                     

     This feature is accessible only when building the debug version
     where it is possible to insert errors in the execution of
     individual blocks of code as part of testing.

     This feature is disabled by default.

   *  `CompressedBackup'

     This table provides type and value information for the
     CompressedBackup data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         boolean           false             true, false
     *Restart Type:* N                                     

     Setting this parameter to `1' causes backup files to be
     compressed. The compression used is equivalent to `gzip --fast',
     and can save 50% or more of the space required on the data node to
     store uncompressed backup files. Compressed backups can be enabled
     for individual data nodes, or for all data nodes (by setting this
     parameter in the `[ndbd default]' section of the `config.ini'
     file).

     *Important*:

     You cannot restore a compressed backup to a cluster running a
     MySQL version that does not support this feature.

     The default value is `0' (disabled).

   *  `CompressedLCP'

     This table provides type and value information for the
     CompressedLCP data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         boolean           false             true, false
     *Restart Type:* N                                     

     Setting this parameter to `1' causes local checkpoint files to be
     compressed. The compression used is equivalent to `gzip --fast',
     and can save 50% or more of the space required on the data node to
     store uncompressed checkpoint files. Compressed LCPs can be
     enabled for individual data nodes, or for all data nodes (by
     setting this parameter in the `[ndbd default]' section of the
     `config.ini' file).

     *Important*:

     You cannot restore a compressed local checkpoint to a cluster
     running a MySQL version that does not support this feature.

     The default value is `0' (disabled).

* Controlling Timeouts, Intervals, and Disk Paging *

There are a number of `[ndbd]' parameters specifying timeouts and
intervals between various actions in Cluster data nodes. Most of the
timeout values are specified in milliseconds. Any exceptions to this
are mentioned where applicable.

   *  `TimeBetweenWatchDogCheck'

     This table provides type and value information for the
     TimeBetweenWatchDogCheck data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         milliseconds      6000              70 - 4G
     *Restart Type:* N                                     

     To prevent the main thread from getting stuck in an endless loop
     at some point, a `watchdog' thread checks the main thread. This
     parameter specifies the number of milliseconds between checks. If
     the process remains in the same state after three checks, the
     watchdog thread terminates it.

     This parameter can easily be changed for purposes of
     experimentation or to adapt to local conditions. It can be
     specified on a per-node basis although there seems to be little
     reason for doing so.

     The default timeout is 6000 milliseconds (6 seconds).

   *  `TimeBetweenWatchDogCheckInitial'

     This table provides type and value information for the
     TimeBetweenWatchDogCheckInitial data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         milliseconds      6000              70 - 4G
     *Restart Type:* N                                     

     This is similar to the `TimeBetweenWatchDogCheck' parameter,
     except that `TimeBetweenWatchDogCheckInitial' controls the amount
     of time that passes between execution checks inside a database
     node in the early start phases during which memory is allocated.

     The default timeout is 6000 milliseconds (6 seconds).

   *  `StartPartialTimeout'

     This table provides type and value information for the
     StartPartialTimeout data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         milliseconds      30000             0 - 4G
     *Restart Type:* N                                     

     This parameter specifies how long the Cluster waits for all data
     nodes to come up before the cluster initialization routine is
     invoked. This timeout is used to avoid a partial Cluster startup
     whenever possible.

     This parameter is overridden when performing an initial start or
     initial restart of the cluster.

     The default value is 30000 milliseconds (30 seconds). 0 disables
     the timeout, in which case the cluster may start only if all nodes
     are available.

   *  `StartPartitionedTimeout'

     This table provides type and value information for the
     StartPartitionedTimeout data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         milliseconds      60000             0 - 4G
     *Restart Type:* N                                     

     If the cluster is ready to start after waiting for
     `StartPartialTimeout' milliseconds but is still possibly in a
     partitioned state, the cluster waits until this timeout has also
     passed. If `StartPartitionedTimeout' is set to 0, the cluster
     waits indefinitely.

     This parameter is overridden when performing an initial start or
     initial restart of the cluster.

     The default timeout is 60000 milliseconds (60 seconds).

   *  `StartFailureTimeout'

     This table provides type and value information for the
     StartFailureTimeout data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         milliseconds      0                 0 - 4G
     *Restart Type:* N                                     

     If a data node has not completed its startup sequence within the
     time specified by this parameter, the node startup fails. Setting
     this parameter to 0 (the default value) means that no data node
     timeout is applied.

     For nonzero values, this parameter is measured in milliseconds.
     For data nodes containing extremely large amounts of data, this
     parameter should be increased. For example, in the case of a data
     node containing several gigabytes of data, a period as long as
     10-15 minutes (that is, 600000 to 1000000 milliseconds) might be
     required to perform a node restart.

   *  `StartNoNodeGroupTimeout'

     This table provides type and value information for the
     StartNoNodeGroupTimeout data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         milliseconds      15000             0 - 4294967039
     *Restart Type:* N                                     

     When a data node is configured with `Nodegroup = 65536', is
     regarded as not being assigned to any node group. When that is
     done, the cluster waits `StartNoNodegroupTimeout' milliseconds,
     then treats such nodes as though they had been added to the list
     passed to the `--nowait-nodes' option, and starts. The default
     value is `15000' (that is, the management server waits 15
     seconds). Setting this parameter equal to `0' means that the
     cluster waits indefinitely.

     `StartNoNodegroupTimeout' must be the same for all data nodes in
     the cluster; for this reason, you should always set it in the
     `[ndbd default]' section of the `config.ini' file, rather than for
     individual data nodes.

     See *Note mysql-cluster-online-add-node::, for more information.

   *  `HeartbeatIntervalDbDb'

     This table provides type and value information for the
     HeartbeatIntervalDbDb data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         milliseconds      5000              10 - 4G
     *Restart Type:* N                                     

     One of the primary methods of discovering failed nodes is by the
     use of heartbeats. This parameter states how often heartbeat
     signals are sent and how often to expect to receive them. After
     missing three heartbeat intervals in a row, the node is declared
     dead. Thus, the maximum time for discovering a failure through the
     heartbeat mechanism is four times the heartbeat interval.

     In MySQL Cluster NDB 7.2.0 and later, the default heartbeat
     interval is 5000 milliseconds (5 seconds). (Previously, the
     default was 1500 milliseconds [1.5 seconds]). This parameter must
     not be changed drastically and should not vary widely between
     nodes. If one node uses 5000 milliseconds and the node watching it
     uses 1000 milliseconds, obviously the node will be declared dead
     very quickly. This parameter can be changed during an online
     software upgrade, but only in small increments.

     See also *Note mysql-cluster-network-latency-issues::.

   *  `HeartbeatIntervalDbApi'

     This table provides type and value information for the
     HeartbeatIntervalDbApi data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         milliseconds      1500              100 - 4G
     *Restart Type:* N                                     

     Each data node sends heartbeat signals to each MySQL server (SQL
     node) to ensure that it remains in contact. If a MySQL server
     fails to send a heartbeat in time it is declared `dead,' in which
     case all ongoing transactions are completed and all resources
     released. The SQL node cannot reconnect until all activities
     initiated by the previous MySQL instance have been completed. The
     three-heartbeat criteria for this determination are the same as
     described for `HeartbeatIntervalDbDb'.

     The default interval is 1500 milliseconds (1.5 seconds).  This
     interval can vary between individual data nodes because each data
     node watches the MySQL servers connected to it, independently of
     all other data nodes.

     For more information, see *Note
     mysql-cluster-network-latency-issues::.

   *  `HeartbeatOrder'

     This table provides type and value information for the
     HeartbeatOrder data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         numeric           0                 0 - 65535
     *Restart Type:* S                                     

     Data nodes send heartbeats to one another in a circular fashion
     whereby each data node monitors the previous one. If a heartbeat
     is not detected by a given data node, this node declares the
     previous data node in the circle `dead' (that is, no longer
     accessible by the cluster). The determination that a data node is
     dead is done globally; in other words; once a data node is
     declared dead, it is regarded as such by all nodes in the cluster.

     It is possible for heartbeats between data nodes residing on
     different hosts to be too slow compared to heartbeats between
     other pairs of nodes (for example, due to a very low heartbeat
     interval or temporary connection problem), such that a data node
     is declared dead, even though the node can still function as part
     of the cluster. .

     In this type of situation, it may be that the order in which
     heartbeats are transmitted between data nodes makes a difference
     as to whether or not a particular data node is declared dead. If
     this declaration occurs unnecessarily, this can in turn lead to
     the unnecessary loss of a node group and as thus to a failure of
     the cluster.

     Consider a setup where there are 4 data nodes A, B, C, and D
     running on 2 host computers `host1' and `host2', and that these
     data nodes make up 2 node groups, as shown in the following table:

     This table helps illustrate a setup in which there are four data
     nodes A, B, C, and D running on two host computers, `host1' and
     `host2', with each data node belonging to one of two node groups.

     Node Group             Nodes Running on       Nodes Running on
                            `host1'                `host2'
     _Node Group 0_:        Node A                 Node B
     _Node Group 1_:        Node C                 Node D

     Suppose the heartbeats are transmitted in the order A->B->C->D->A.
     In this case, the loss of the heartbeat between the hosts causes
     node B to declare node A dead and node C to declare node B dead.
     This results in loss of Node Group 0, and so the cluster fails. On
     the other hand, if the order of transmission is A->B->D->C->A (and
     all other conditions remain as previously stated), the loss of the
     heartbeat causes nodes A and D to be declared dead; in this case,
     each node group has one surviving node, and the cluster survives.

     The `HeartbeatOrder' configuration parameter makes the order of
     heartbeat transmission user-configurable. The default value for
     `HeartbeatOrder' is zero; allowing the default value to be used on
     all data nodes causes the order of heartbeat transmission to be
     determined by `NDB'. If this parameter is used, it must be set to
     a nonzero value (maximum 65535) for every data node in the
     cluster, and this value must be unique for each data node; this
     causes the heartbeat transmission to proceed from data node to
     data node in the order of their `HeartbeatOrder' values from
     lowest to highest (and then directly from the data node having the
     highest `HeartbeatOrder' to the data node having the lowest value,
     to complete the circle). The values need not be consecutive; for
     example, to force the heartbeat transmission order A->B->D->C->A
     in the scenario outlined previously, you could set the
     `HeartbeatOrder' values as shown here:

     This table lists each node and the heartbeat order value to
     illustrate the previously described scenario in which
     `HeartbeatOrder' values are set to force a heartbeat transition
     order of A->B->D->C->A.

     Node                               `HeartbeatOrder'
     A                                  10
     B                                  20
     C                                  30
     D                                  25

     To use this parameter to change the heartbeat transmission order
     in a running MySQL Cluster, you must first set `HeartbeatOrder' for
     each data node in the cluster in the global configuration
     (`config.ini') file (or files). To cause the change to take
     effect, you must perform either of the following:

        * A complete shutdown and restart of the entire cluster.

        * 2 rolling restarts of the cluster in succession.  _All nodes
          must be restarted in the same order in both rolling restarts_.

     You can use `DUMP 908' to observe the effect of this parameter in
     the data node logs.

   *  `ConnectCheckIntervalDelay'

     This table provides type and value information for the
     ConnectCheckIntervalDelay data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         string            1500              0 - 4G
     NDB 7.2.1         string            0                 0 - 4G
     *Restart Type:* N                                     

     This parameter enables connection checking between data nodes. A
     data node that fails to respond within an interval of
     `ConnectCheckIntervalDelay' seconds is considered suspect, and is
     considered dead after two such intervals.

     The default value for this parameter is 0; this is a change from
     MySQL Cluster NDB 7.1.

   *  `TimeBetweenLocalCheckpoints'

     This table provides type and value information for the
     TimeBetweenLocalCheckpoints data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         number of 4-byte  20                0 - 31
                       words, as a                         
                       base-2 logarithm                    
     *Restart Type:* N                                     

     This parameter is an exception in that it does not specify a time
     to wait before starting a new local checkpoint; rather, it is used
     to ensure that local checkpoints are not performed in a cluster
     where relatively few updates are taking place. In most clusters
     with high update rates, it is likely that a new local checkpoint
     is started immediately after the previous one has been completed.

     The size of all write operations executed since the start of the
     previous local checkpoints is added. This parameter is also
     exceptional in that it is specified as the base-2 logarithm of the
     number of 4-byte words, so that the default value 20 means 4MB (4 x
     2^20) of write operations, 21 would mean 8MB, and so on up to a
     maximum value of 31, which equates to 8GB of write operations.

     All the write operations in the cluster are added together.
     Setting `TimeBetweenLocalCheckpoints' to 6 or less means that
     local checkpoints will be executed continuously without pause,
     independent of the cluster's workload.

   *  `TimeBetweenGlobalCheckpoints'

     This table provides type and value information for the
     TimeBetweenGlobalCheckpoints data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         milliseconds      2000              20 - 32000
     *Restart Type:* N                                     

     When a transaction is committed, it is committed in main memory in
     all nodes on which the data is mirrored. However, transaction log
     records are not flushed to disk as part of the commit. The
     reasoning behind this behavior is that having the transaction
     safely committed on at least two autonomous host machines should
     meet reasonable standards for durability.

     It is also important to ensure that even the worst of cases--a
     complete crash of the cluster--is handled properly. To guarantee
     that this happens, all transactions taking place within a given
     interval are put into a global checkpoint, which can be thought of
     as a set of committed transactions that has been flushed to disk.
     In other words, as part of the commit process, a transaction is
     placed in a global checkpoint group. Later, this group's log
     records are flushed to disk, and then the entire group of
     transactions is safely committed to disk on all computers in the
     cluster.

     This parameter defines the interval between global checkpoints.
     The default is 2000 milliseconds.

   *  `TimeBetweenEpochs'

     This table provides type and value information for the
     TimeBetweenEpochs data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         milliseconds      100               0 - 32000
     *Restart Type:* N                                     

     This parameter defines the interval between synchronization epochs
     for MySQL Cluster Replication. The default value is 100
     milliseconds.

     `TimeBetweenEpochs' is part of the implementation of `micro-GCPs',
     which can be used to improve the performance of MySQL Cluster
     Replication.

   *  `TimeBetweenEpochsTimeout'

     This table provides type and value information for the
     TimeBetweenEpochsTimeout data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         milliseconds      4000              0 - 256000
     *Restart Type:* N                                     

     This parameter defines a timeout for synchronization epochs for
     MySQL Cluster Replication. If a node fails to participate in a
     global checkpoint within the time determined by this parameter,
     the node is shut down. In MySQL Cluster NDB 7.2.0 and later, the
     default value is 0; in other words, the timeout is disabled. This
     represents a change from previous versions of MySQL Cluster, in
     which the default value was 4000 milliseconds (4 seconds).

     `TimeBetweenEpochsTimeout' is part of the implementation of
     `micro-GCPs', which can be used to improve the performance of MySQL
     Cluster Replication.

     The current value of this parameter and a warning are written to
     the cluster log whenever a GCP save takes longer than 1 minute or
     a GCP save takes longer than 10 seconds.

     Setting this parameter to zero has the effect of disabling GCP
     stops caused by save timeouts, commit timeouts, or both.  The
     maximum possible value for this parameter is 256000 milliseconds.

   *  `MaxBufferedEpochs'

     This table provides type and value information for the
     MaxBufferedEpochs data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         epochs            100               0 - 100000
     *Restart Type:* N                                     

     The number of unprocessed epochs by which a subscribing node can
     lag behind. Exceeding this number causes a lagging subscriber to
     be disconnected.

     The default value of 100 is sufficient for most normal operations.
     If a subscribing node does lag enough to cause disconnections, it
     is usually due to network or scheduling issues with regard to
     processes or threads. (In rare circumstances, the problem may be
     due to a bug in the *Note `NDB': mysql-cluster. client.) It may be
     desirable to set the value lower than the default when epochs are
     longer.

     Disconnection prevents client issues from affecting the data node
     service, running out of memory to buffer data, and eventually
     shutting down. Instead, only the client is affected as a result of
     the disconnect (by, for example gap events in the binary log),
     forcing the client to reconnect or restart the process.

   *  `MaxBufferedEpochBytes'

     This table provides type and value information for the
     MaxBufferedEpochBytes data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             26214400          26214400
                                                           (0x01900000) -
                                                           4294967039
                                                           (0xFFFFFEFF)
     NDB 7.2.13        bytes             26214400          26214400
                                                           (0x01900000) -
                                                           4294967039
                                                           (0xFFFFFEFF)
     *Restart Type:* N                                     

     The total number of bytes allocated for buffering epochs by this
     node.

     This parameter was introduced in MySQL Cluster NDB 7.2.13.  (Bug
     #16203623)

   *  `TimeBetweenInactiveTransactionAbortCheck'

     This table provides type and value information for the
     TimeBetweenInactiveTransactionAbortCheck data node configuration
     parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         milliseconds      1000              1000 - 4G
     *Restart Type:* N                                     

     Timeout handling is performed by checking a timer on each
     transaction once for every interval specified by this parameter.
     Thus, if this parameter is set to 1000 milliseconds, every
     transaction will be checked for timing out once per second.

     The default value is 1000 milliseconds (1 second).

   *  `TransactionInactiveTimeout'

     This table provides type and value information for the
     TransactionInactiveTimeout data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         milliseconds      4G                0 - 4G
     *Restart Type:* N                                     

     This parameter states the maximum time that is permitted to lapse
     between operations in the same transaction before the transaction
     is aborted.

     The default for this parameter is `4G' (also the maximum). For a
     real-time database that needs to ensure that no transaction keeps
     locks for too long, this parameter should be set to a relatively
     small value. The unit is milliseconds.

   *  `TransactionDeadlockDetectionTimeout'

     This table provides type and value information for the
     TransactionDeadlockDetectionTimeout data node configuration
     parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         milliseconds      1200              50 - 4G
     *Restart Type:* N                                     

     When a node executes a query involving a transaction, the node
     waits for the other nodes in the cluster to respond before
     continuing. A failure to respond can occur for any of the
     following reasons:

        * The node is `dead'

        * The operation has entered a lock queue

        * The node requested to perform the action could be heavily
          overloaded.

     This timeout parameter states how long the transaction coordinator
     waits for query execution by another node before aborting the
     transaction, and is important for both node failure handling and
     deadlock detection.

     The default timeout value is 1200 milliseconds (1.2 seconds).

     The minimum for this parameter is 50 milliseconds.

   *  `DiskSyncSize'

     This table provides type and value information for the
     DiskSyncSize data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             4M                32K - 4G
     *Restart Type:* N                                     

     This is the maximum number of bytes to store before flushing data
     to a local checkpoint file. This is done to prevent write
     buffering, which can impede performance significantly.  This
     parameter is _not_ intended to take the place of
     `TimeBetweenLocalCheckpoints'.

     *Note*:

     When `ODirect' is enabled, it is not necessary to set
     `DiskSyncSize'; in fact, in such cases its value is simply ignored.

     The default value is 4M (4 megabytes).

   *  `DiskCheckpointSpeed'

     This table provides type and value information for the
     DiskCheckpointSpeed data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             10M               1M - 4G
     *Restart Type:* N                                     

     The amount of data,in bytes per second, that is sent to disk
     during a local checkpoint. This allocation is shared by DML
     operations and backups (but not backup logging), which means that
     backups started during times of intensive DML may be impaired by
     flooding of the redo log buffer and may fail altogether if the
     contention is sufficiently severe.

     The default value is 10M (10 megabytes per second).

   *  `DiskCheckpointSpeedInRestart'

     This table provides type and value information for the
     DiskCheckpointSpeedInRestart data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             100M              1M - 4G
     *Restart Type:* N                                     

     The amount of data,in bytes per second, that is sent to disk
     during a local checkpoint as part of a restart operation.

     The default value is 100M (100 megabytes per second).

   *  `NoOfDiskPagesToDiskAfterRestartTUP'

     This parameter is deprecated and subject to removal in a future
     version of MySQL Cluster. Use `DiskCheckpointSpeedInRestart' and
     `DiskSyncSize' instead.

   *  `NoOfDiskPagesToDiskAfterRestartACC'

     This parameter is deprecated and subject to removal in a future
     version of MySQL Cluster. Use `DiskCheckpointSpeedInRestart' and
     `DiskSyncSize' instead.

   *  `NoOfDiskPagesToDiskDuringRestartTUP' (DEPRECATED)

     This parameter is deprecated and subject to removal in a future
     version of MySQL Cluster. Use `DiskCheckpointSpeedInRestart' and
     `DiskSyncSize' instead.

   *  `NoOfDiskPagesToDiskDuringRestartACC' (DEPRECATED)

     This parameter is deprecated and subject to removal in a future
     version of MySQL Cluster. Use `DiskCheckpointSpeedInRestart' and
     `DiskSyncSize' instead.

   *  `ArbitrationTimeout'

     This table provides type and value information for the
     ArbitrationTimeout data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         milliseconds      7500              10 - 4G
     *Restart Type:* N                                     

     This parameter specifies how long data nodes wait for a response
     from the arbitrator to an arbitration message. If this is
     exceeded, the network is assumed to have split.

     In MySQL Cluster NDB 7.2.0 and later, the default value is 7500
     milliseconds (7.5 seconds). Previously, this was 3000 milliseconds
     (3 seconds).

   *  `Arbitration'

     This table provides type and value information for the Arbitration
     data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         enumeration       Default           Default,
                                                           Disabled,
                                                           WaitExternal
     *Restart Type:* N                                     

     The `Arbitration' parameter enables a choice of arbitration
     schemes, corresponding to one of 3 possible values for this
     parameter:

        * `Default'

          This enables arbitration to proceed normally, as determined
          by the `ArbitrationRank' settings for the management and API
          nodes. This is the default value.

        * `Disabled'

          Setting `Arbitration = Disabled' in the `[ndbd default]'
          section of the `config.ini' file to accomplishes the same
          task as setting `ArbitrationRank' to 0 on all management and
          API nodes. When `Arbitration' is set in this way, any
          `ArbitrationRank' settings are ignored.

        * `WaitExternal'

          The `Arbitration' parameter also makes it possible to
          configure arbitration in such a way that the cluster waits
          until after the time determined by `ArbitrationTimeout' has
          passed for an external cluster manager application to perform
          arbitration instead of handling arbitration internally. This
          can be done by setting `Arbitration = WaitExternal' in the
          `[ndbd default]' section of the `config.ini' file. For best
          results with the `WaitExternal' setting, it is recommended
          that `ArbitrationTimeout' be 2 times as long as the interval
          required by the external cluster manager to perform
          arbitration.

     *Important*:

     This parameter should be used only in the `[ndbd default]' section
     of the cluster configuration file. The behavior of the cluster is
     unspecified when `Arbitration' is set to different values for
     individual data nodes.

Buffering and logging

Several `[ndbd]' configuration parameters enable the advanced user to
have more control over the resources used by node processes and to
adjust various buffer sizes at need.

These buffers are used as front ends to the file system when writing
log records to disk. If the node is running in diskless mode, these
parameters can be set to their minimum values without penalty due to
the fact that disk writes are `faked' by the *Note `NDB': mysql-cluster.
storage engine's file system abstraction layer.

   *  `UndoIndexBuffer'

     This table provides type and value information for the
     UndoIndexBuffer data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          2M                1M - 4G
     *Restart Type:* N                                     

     The UNDO index buffer, whose size is set by this parameter, is
     used during local checkpoints. The *Note `NDB': mysql-cluster.
     storage engine uses a recovery scheme based on checkpoint
     consistency in conjunction with an operational REDO log. To
     produce a consistent checkpoint without blocking the entire system
     for writes, UNDO logging is done while performing the local
     checkpoint. UNDO logging is activated on a single table fragment
     at a time. This optimization is possible because tables are stored
     entirely in main memory.

     The UNDO index buffer is used for the updates on the primary key
     hash index. Inserts and deletes rearrange the hash index; the NDB
     storage engine writes UNDO log records that map all physical
     changes to an index page so that they can be undone at system
     restart. It also logs all active insert operations for each
     fragment at the start of a local checkpoint.

     Reads and updates set lock bits and update a header in the hash
     index entry. These changes are handled by the page-writing
     algorithm to ensure that these operations need no UNDO logging.

     This buffer is 2MB by default. The minimum value is 1MB, which is
     sufficient for most applications. For applications doing extremely
     large or numerous inserts and deletes together with large
     transactions and large primary keys, it may be necessary to
     increase the size of this buffer. If this buffer is too small, the
     NDB storage engine issues internal error code 677 (`Index UNDO
     buffers overloaded').

     *Important*:

     It is not safe to decrease the value of this parameter during a
     rolling restart.

   *  `UndoDataBuffer'

     This table provides type and value information for the
     UndoDataBuffer data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          16M               1M - 4G
     *Restart Type:* N                                     

     This parameter sets the size of the UNDO data buffer, which
     performs a function similar to that of the UNDO index buffer,
     except the UNDO data buffer is used with regard to data memory
     rather than index memory. This buffer is used during the local
     checkpoint phase of a fragment for inserts, deletes, and updates.

     Because UNDO log entries tend to grow larger as more operations
     are logged, this buffer is also larger than its index memory
     counterpart, with a default value of 16MB.

     This amount of memory may be unnecessarily large for some
     applications. In such cases, it is possible to decrease this size
     to a minimum of 1MB.

     It is rarely necessary to increase the size of this buffer.  If
     there is such a need, it is a good idea to check whether the disks
     can actually handle the load caused by database update activity. A
     lack of sufficient disk space cannot be overcome by increasing the
     size of this buffer.

     If this buffer is too small and gets congested, the NDB storage
     engine issues internal error code 891 (`Data UNDO buffers
     overloaded').

     *Important*:

     It is not safe to decrease the value of this parameter during a
     rolling restart.

   *  `RedoBuffer'

     This table provides type and value information for the RedoBuffer
     data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             32M               1M - 4G
     *Restart Type:* N                                     

     All update activities also need to be logged. The REDO log makes
     it possible to replay these updates whenever the system is
     restarted. The NDB recovery algorithm uses a `fuzzy' checkpoint of
     the data together with the UNDO log, and then applies the REDO log
     to play back all changes up to the restoration point.

     `RedoBuffer' sets the size of the buffer in which the REDO log is
     written. The default value is 32MB; the minimum value is 1MB.

     If this buffer is too small, the *Note `NDB': mysql-cluster.
     storage engine issues error code 1221 (`REDO log buffers
     overloaded'). For this reason, you should exercise care if you
     attempt to decrease the value of `RedoBuffer' as part of an online
     change in the cluster's configuration.

Controlling log messages

In managing the cluster, it is very important to be able to control the
number of log messages sent for various event types to `stdout'. For
each event category, there are 16 possible event levels (numbered 0
through 15).  Setting event reporting for a given event category to
level 15 means all event reports in that category are sent to `stdout';
setting it to 0 means that there will be no event reports made in that
category.

By default, only the startup message is sent to `stdout', with the
remaining event reporting level defaults being set to 0. The reason for
this is that these messages are also sent to the management server's
cluster log.

An analogous set of levels can be set for the management client to
determine which event levels to record in the cluster log.

   *  `LogLevelStartup'

     This table provides type and value information for the
     LogLevelStartup data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           1                 0 - 15
     *Restart Type:* N                                     

     The reporting level for events generated during startup of the
     process.

     The default level is 1.

   *  `LogLevelShutdown'

     This table provides type and value information for the
     LogLevelShutdown data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           0                 0 - 15
     *Restart Type:* N                                     

     The reporting level for events generated as part of graceful
     shutdown of a node.

     The default level is 0.

   *  `LogLevelStatistic'

     This table provides type and value information for the
     LogLevelStatistic data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           0                 0 - 15
     *Restart Type:* N                                     

     The reporting level for statistical events such as number of
     primary key reads, number of updates, number of inserts,
     information relating to buffer usage, and so on.

     The default level is 0.

   *  `LogLevelCheckpoint'

     This table provides type and value information for the
     LogLevelCheckpoint data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         log level         0                 0 - 15
     *Restart Type:* N                                     

     The reporting level for events generated by local and global
     checkpoints.

     The default level is 0.

   *  `LogLevelNodeRestart'

     This table provides type and value information for the
     LogLevelNodeRestart data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           0                 0 - 15
     *Restart Type:* N                                     

     The reporting level for events generated during node restart.

     The default level is 0.

   *  `LogLevelConnection'

     This table provides type and value information for the
     LogLevelConnection data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           0                 0 - 15
     *Restart Type:* N                                     

     The reporting level for events generated by connections between
     cluster nodes.

     The default level is 0.

   *  `LogLevelError'

     This table provides type and value information for the
     LogLevelError data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           0                 0 - 15
     *Restart Type:* N                                     

     The reporting level for events generated by errors and warnings by
     the cluster as a whole. These errors do not cause any node failure
     but are still considered worth reporting.

     The default level is 0.

   *  `LogLevelCongestion'

     This table provides type and value information for the
     LogLevelCongestion data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         levelr            0                 0 - 15
     *Restart Type:* N                                     

     The reporting level for events generated by congestion.  These
     errors do not cause node failure but are still considered worth
     reporting.

     The default level is 0.

   *  `LogLevelInfo'

     This table provides type and value information for the
     LogLevelInfo data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           0                 0 - 15
     *Restart Type:* N                                     

     The reporting level for events generated for information about the
     general state of the cluster.

     The default level is 0.

   *  `MemReportFrequency'

     This table provides type and value information for the
     MemReportFrequency data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          0                 0 - 4G
     *Restart Type:* N                                     

     This parameter controls how often data node memory usage reports
     are recorded in the cluster log; it is an integer value
     representing the number of seconds between reports.

     Each data node's data memory and index memory usage is logged as
     both a percentage and a number of 32 KB pages of the `DataMemory'
     and `IndexMemory', respectively, set in the `config.ini' file. For
     example, if `DataMemory' is equal to 100 MB, and a given data node
     is using 50 MB for data memory storage, the corresponding line in
     the cluster log might look like this:

          2006-12-24 01:18:16 [MgmSrvr] INFO -- Node 2: Data usage is 50%(1280 32K pages of total 2560)

     `MemReportFrequency' is not a required parameter. If used, it can
     be set for all cluster data nodes in the `[ndbd default]' section
     of `config.ini', and can also be set or overridden for individual
     data nodes in the corresponding `[ndbd]' sections of the
     configuration file. The minimum value--which is also the default
     value--is 0, in which case memory reports are logged only when
     memory usage reaches certain percentages (80%, 90%, and 100%), as
     mentioned in the discussion of statistics events in *Note
     mysql-cluster-log-events::.

   *  `StartupStatusReportFrequency'

     This table provides type and value information for the
     StartupStatusReportFrequency data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         seconds           [none]            ...
     *Restart Type:* N                                     

     When a data node is started with the `--initial', it initializes
     the redo log file during Start Phase 4 (see *Note
     mysql-cluster-start-phases::). When very large values are set for
     `NoOfFragmentLogFiles', `FragmentLogFileSize', or both, this
     initialization can take a long time.You can force reports on the
     progress of this process to be logged periodically, by means of the
     `StartupStatusReportFrequency' configuration parameter. In this
     case, progress is reported in the cluster log, in terms of both
     the number of files and the amount of space that have been
     initialized, as shown here:

          2009-06-20 16:39:23 [MgmSrvr] INFO -- Node 1: Local redo log file initialization status:
          #Total files: 80, Completed: 60
          #Total MBytes: 20480, Completed: 15557
          2009-06-20 16:39:23 [MgmSrvr] INFO -- Node 2: Local redo log file initialization status:
          #Total files: 80, Completed: 60
          #Total MBytes: 20480, Completed: 15570

     These reports are logged each `StartupStatusReportFrequency'
     seconds during Start Phase 4. If `StartupStatusReportFrequency' is
     0 (the default), then reports are written to the cluster log only
     when at the beginning and at the completion of the redo log file
     initialization process.

Debugging Parameters

In MySQL Cluster NDB 7.2, it is possible to cause logging of traces for
events generated by creating and dropping tables using `DictTrace'. This
parameter is useful only in debugging NDB kernel code.  `DictTrace'
takes an integer value; currently, 0 (default - no logging) and 1
(logging enabled) are the only supported values.

Backup parameters

The `[ndbd]' parameters discussed in this section define memory buffers
set aside for execution of online backups.

   *  `BackupDataBufferSize'

     This table provides type and value information for the
     BackupDataBufferSize data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             16M               0 - 4G
     *Restart Type:* N                                     

     In creating a backup, there are two buffers used for sending data
     to the disk. The backup data buffer is used to fill in data
     recorded by scanning a node's tables. Once this buffer has been
     filled to the level specified as `BackupWriteSize', the pages are
     sent to disk. While flushing data to disk, the backup process can
     continue filling this buffer until it runs out of space. When this
     happens, the backup process pauses the scan and waits until some
     disk writes have completed freed up memory so that scanning may
     continue.

     The default value for this parameter is 16MB.

   *  `BackupLogBufferSize'

     This table provides type and value information for the
     BackupLogBufferSize data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             16M               0 - 4G
     *Restart Type:* N                                     

     The backup log buffer fulfills a role similar to that played by
     the backup data buffer, except that it is used for generating a
     log of all table writes made during execution of the backup. The
     same principles apply for writing these pages as with the backup
     data buffer, except that when there is no more space in the backup
     log buffer, the backup fails.  For that reason, the size of the
     backup log buffer must be large enough to handle the load caused
     by write activities while the backup is being made. See *Note
     mysql-cluster-backup-configuration::.

     The default value for this parameter should be sufficient for most
     applications. In fact, it is more likely for a backup failure to
     be caused by insufficient disk write speed than it is for the
     backup log buffer to become full. If the disk subsystem is not
     configured for the write load caused by applications, the cluster
     is unlikely to be able to perform the desired operations.

     It is preferable to configure cluster nodes in such a manner that
     the processor becomes the bottleneck rather than the disks or the
     network connections.

     The default value for this parameter is 16MB.

   *  `BackupMemory'

     This table provides type and value information for the
     BackupMemory data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             32M               0 - 4G
     *Restart Type:* N                                     

     This parameter is simply the sum of `BackupDataBufferSize' and
     `BackupLogBufferSize'.

     The default value of this parameter in MySQL Cluster NDB 7.2 is
     16MB + 16MB = 32MB.

     *Important*:

     If `BackupDataBufferSize' and `BackupLogBufferSize' taken together
     exceed the default value for `BackupMemory', then this parameter
     must be set explicitly in the `config.ini' file to their sum.

   *  `BackupReportFrequency'

     This table provides type and value information for the
     BackupReportFrequency data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         seconds           0                 0 - 4G
     *Restart Type:* N                                     

     This parameter controls how often backup status reports are issued
     in the management client during a backup, as well as how often
     such reports are written to the cluster log (provided cluster
     event logging is configured to permit it--see *Note
     mysql-cluster-logging-and-checkpointing::).
     `BackupReportFrequency' represents the time in seconds between
     backup status reports.

     The default value is 0.

   *  `BackupWriteSize'

     This table provides type and value information for the
     BackupWriteSize data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             256K              2K - 4G
     *Restart Type:* N                                     

     This parameter specifies the default size of messages written to
     disk by the backup log and backup data buffers.

     The default value for this parameter is 256KB.

   *  `BackupMaxWriteSize'

     This table provides type and value information for the
     BackupMaxWriteSize data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             1M                2K - 4G
     NDB 7.2.1         bytes             1M                2K - 4G
     *Restart Type:* N                                     

     This parameter specifies the maximum size of messages written to
     disk by the backup log and backup data buffers.

     The default value for this parameter is 1MB.

*Important*:

When specifying these parameters, the following relationships must hold
true. Otherwise, the data node will be unable to start.

   * `BackupDataBufferSize >= BackupWriteSize + 188KB'

   * `BackupLogBufferSize >= BackupWriteSize + 16KB'

   * `BackupMaxWriteSize >= BackupWriteSize'

* MySQL Cluster Realtime Performance Parameters *

The `[ndbd]' parameters discussed in this section are used in
scheduling and locking of threads to specific CPUs on multiprocessor
data node hosts.

*Note*:

To make use of these parameters, the data node process must be run as
system root.

   *  `LockExecuteThreadToCPU'

     This table provides type and value information for the
     LockExecuteThreadToCPU data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         CPU ID            64K               0 - 64K
     *Restart Type:* N                                     

     When used with *Note `ndbd': mysql-cluster-programs-ndbd, this
     parameter (now a string) specifies the ID of the CPU assigned to
     handle the *Note `NDBCLUSTER': mysql-cluster. execution thread.
     When used with *Note `ndbmtd': mysql-cluster-programs-ndbmtd, the
     value of this parameter is a comma-separated list of CPU IDs
     assigned to handle execution threads. Each CPU ID in the list
     should be an integer in the range 0 to 65535 (inclusive).

     The number of IDs specified should match the number of execution
     threads determined by `MaxNoOfExecutionThreads'.  However, there
     is no guarantee that threads are assigned to CPUs in any given
     order when using this parameter; beginning with in MySQL Cluster
     NDB 7.2.5, you can obtain more finely-grained control of this type
     using `ThreadConfig'.

     `LockExecuteThreadToCPU' has no default value.

   *  `LockMaintThreadsToCPU'

     This table provides type and value information for the
     LockMaintThreadsToCPU data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         CPU ID            [none]            0 - 64K
     *Restart Type:* N                                     

     This parameter specifies the ID of the CPU assigned to handle
     *Note `NDBCLUSTER': mysql-cluster. maintenance threads.

     The value of this parameter is an integer in the range 0 to 65535
     (inclusive). In MySQL Cluster NDB 7.2, there is no default value.

   *  `RealtimeScheduler'

     This table provides type and value information for the
     RealtimeScheduler data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         boolean           false             true, false
     *Restart Type:* N                                     

     Setting this parameter to 1 enables real-time scheduling of *Note
     `NDBCLUSTER': mysql-cluster. threads.

     This parameter is not intended or recommended for use with data
     nodes running *Note `ndbmtd': mysql-cluster-programs-ndbmtd, and
     enabling it in such cases is known to have adverse effects.

     The default is 0 (scheduling disabled).

   *  `SchedulerExecutionTimer'

     This table provides type and value information for the
     SchedulerExecutionTimer data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         µsec             50                0 - 11000
     *Restart Type:* N                                     

     This parameter specifies the time in microseconds for threads to
     be executed in the scheduler before being sent.  Setting it to 0
     minimizes the response time; to achieve higher throughput, you can
     increase the value at the expense of longer response times.

     The default is 50 μsec, which our testing shows to increase
     throughput slightly in high-load cases without materially delaying
     requests.

   *  `SchedulerSpinTimer'

     This table provides type and value information for the
     SchedulerSpinTimer data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         µsec             0                 0 - 500
     *Restart Type:* N                                     

     This parameter specifies the time in microseconds for threads to
     be executed in the scheduler before sleeping.

     The default value is 0.

   *  `BuildIndexThreads'

     This table provides type and value information for the
     BuildIndexThreads data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         numeric           0                 0 - 128
     *Restart Type:* S                                     

     This parameter determines the number of threads to create when
     rebuilding indexes during a system or node start. It is supported
     only when there is more than one fragment for the table per data
     node (for example, when the `MAX_ROWS' option has been used with
     *Note `CREATE TABLE': create-table.).

     Setting this parameter to 0 (which is also the default value)
     disables multi-threaded building of ordered indexes.  The maximum
     allowed value is 128.

     This parameter is supported when using *Note `ndbd':
     mysql-cluster-programs-ndbd. or *Note `ndbmtd':
     mysql-cluster-programs-ndbmtd.

     You can enable multi-threaded builds during data node initial
     restarts by setting the `TwoPassInitialNodeRestartCopy' data node
     configuration parameter to `TRUE'.

   *  `TwoPassInitialNodeRestartCopy'

     This table provides type and value information for the
     TwoPassInitialNodeRestartCopy data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         boolean           false             true, false
     *Restart Type:* N                                     

     Multi-threaded building of ordered indexes can be enabled for
     initial restarts of data nodes by setting this configuration
     parameter to `TRUE', which enables two-pass copying of data during
     initial node restarts.

     You must also set `BuildIndexThreads' to a nonzero value.

   *  `Numa'

     This table provides type and value information for the Numa data
     node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         boolean           1                 ...
     *Restart Type:* N                                     

     *Note `NDB': mysql-cluster. is extremely sensitive to Non-Uniform
     Memory Access settings and multi-CPU systems due to timeouts that
     it can cause. Due to this fact, and because most MySQL Cluster
     users do not employ `numactl', support for NUMA is ignored by
     default by *Note `ndbd': mysql-cluster-programs-ndbd. when running
     on a Linux system. If your Linux system provides NUMA support and
     you wish for data node memory to be subject to NUMA control, you
     can set this parameter equal to 0.

     The `Numa' configuration parameter is supported only on Linux
     systems where `libnuma.so' is installed.

Multi-Threading Configuration Parameters (`ndbmtd')

*Note `ndbmtd': mysql-cluster-programs-ndbmtd. runs by default as a
single-threaded process and must be configured to use multiple threads,
using either of two methods, both of which require setting
configuration parameters in the `config.ini' file. The first method is
simply to set an appropriate value for the `MaxNoOfExecutionThreads'
configuration parameter. In MySQL Cluster NDB 7.2.3 and later, a second
method is also supported, whereby it is possible to set up more complex
rules for *Note `ndbmtd': mysql-cluster-programs-ndbmtd.
multi-threading using `ThreadConfig'. The next few paragraphs provide
information about these parameters and their use with multi-threaded
data nodes.

   *  `MaxNoOfExecutionThreads'

     This table provides type and value information for the
     MaxNoOfExecutionThreads multi-threaded data node configuration
     parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         integer           2                 2 - 8
     NDB 7.2.5         integer           2                 2 - 36
     *Restart Type:* N                                     

     Starting with MySQL Cluster NDB 7.2.5, this parameter directly
     controls the number of execution threads used by *Note `ndbmtd':
     mysql-cluster-programs-ndbmtd, up to a maximum of 36. Although
     this parameter is set in `[ndbd]' or `[ndbd default]' sections of
     the `config.ini' file, it is exclusive to *Note `ndbmtd':
     mysql-cluster-programs-ndbmtd. and does not apply to *Note `ndbd':
     mysql-cluster-programs-ndbd.

     Setting `MaxNoOfExecutionThreads' sets the number of threads by
     type as determined in the following table:

     This table shows `MaxNoOfExecutionThreads' values and the
     corresponding number of threads by thread type (LQH, TC, Send,
     Receive).

     `MaxNoOfExecutionThreads' Value     LQH      TC       Send     Receive
                                         Threads  Threads  Threads  Threads
     0 .. 3                              1        1        0        1
     4 .. 6                              2        1        0        1
     7 .. 8                              4        1        0        1
     9                                   4        2        0        1
     10                                  4        2        1        1
     11                                  4        3        1        1
     12                                  4        3        1        2
     13                                  4        3        2        2
     14                                  4        4        2        2
     15                                  4        5        2        2
     16                                  8        3        1        2
     17                                  8        4        1        2
     18                                  8        4        2        2
     19                                  8        5        2        2
     20                                  8        5        2        3
     21                                  8        5        3        3
     22                                  8        6        3        3
     23                                  8        7        3        3
     24                                  12       5        2        3
     25                                  12       6        2        3
     26                                  12       6        3        3
     27                                  12       7        3        3
     28                                  12       7        3        4
     29                                  12       8        3        4
     30                                  12       8        4        4
     31                                  12       9        4        4
     32                                  16       8        3        3
     33                                  16       8        3        4
     34                                  16       8        4        4
     35                                  16       9        4        4
     36                                  16       10       4        4

     Note that the number of LQH threads must not exceed
     `NoOfFragmentLogParts'.  If this parameter's value is the default
     (4), this means that you must increase it as well, when setting
     `MaxNoOfExecutionThreads' to 16 or greater; that is, you should set
     `NoOfFragmentLogParts' to the corresponding number of LQH threads
     value shown for that value of `MaxNoOfExecutionThreads' in the
     preceding table.

     There is always one SUMA (replication) thread. There was no
     separate send thread in MySQL Cluster NDB 7.2.4 and earlier, as
     well as no means of changing the number of TC threads.

     The thread types are described later in this section (see
     `ThreadConfig').

     Setting this parameter outside the permitted range of values
     causes the management server to abort on startup with the error
     `Error line NUMBER: Illegal value VALUE for parameter
     MaxNoOfExecutionThreads'.

     For `MaxNoOfExecutionThreads', a value of 0 or 1 is rounded up
     internally by *Note `NDB': mysql-cluster. to 2, so that 2 is
     considered this parameter's default and minimum value.

     `MaxNoOfExecutionThreads' is generally intended to be set equal to
     the number of CPU threads available, and to allocate a number of
     threads of each type suitable to typical workloads. It does not
     assign particular threads to specified CPUs. For cases where it is
     desirable to vary from the settings provided, or to bind threads to
     CPUs, you should use `ThreadConfig' instead, which allows you to
     allocate each thread directly to a desired type, CPU, or both.

     In MySQL Cluster NDB 7.2.5 and later, the multi-threaded data node
     process always spawns at least 5 threads, listed here:

        * 1 local query handler (LQH) thread

        * 1 transaction coordinator (TC) thread

        * 1 send thread

          (It is possible to keep any separate send threads from being
          employed, as explained elsewhere in this section.)

        * 1 receive thread

        * 1 subscription manager (SUMA or replication) thread

     In MySQL Cluster NDB 7.2.4 and earlier, there were only 4 thread
     types, with LDM threads being responsible for their own sends. In
     addition, it was not possible to cause *Note `ndbmtd':
     mysql-cluster-programs-ndbmtd. to use more than 1 TC thread.

   *  `NoOfFragmentLogParts'

     This table provides type and value information for the
     NoOfFragmentLogParts multi-threaded data node configuration
     parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.5         numeric           4                 4, 8, 12, 16
     *Restart Type:*                                       
     IN                                                    

     Set the number of log file groups for redo logs belonging to this
     *Note `ndbmtd': mysql-cluster-programs-ndbmtd. The value must be
     an even multiple of 4 between 4 and 16, inclusive.

     Note that the number of LQH threads used by *Note `ndbmtd':
     mysql-cluster-programs-ndbmtd. must not exceed
     `NoOfFragmentLogParts', and that this number may increase when
     increasing `MaxNoOfExecutionThreads'; see the description of this
     parameter for more information.

   *  `ThreadConfig'

     This table provides type and value information for the
     ThreadConfig multi-threaded data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         string            "                 ...
     NDB 7.2.3         string            "                 ...
     *Restart Type:* N                                     

     This parameter is used with *Note `ndbmtd':
     mysql-cluster-programs-ndbmtd. to assign threads of different
     types to different CPUs. Its value is a string whose format has
     the following syntax:

          ThreadConfig := ENTRY[,ENTRY[,...]]

          ENTRY := TYPE={PARAM[,PARAM[,...]]}

          TYPE := ldm | main | recv | send | rep | io

          PARAM := count=NUMBER | cpubind=CPU_LIST

     The curly braces (`{'...`}') surrounding the list of parameters is
     required, even if there is only one parameter in the list.

     A PARAM (parameter) specifies the number of threads of the given
     type (`count'), the CPUs to which the threads of the given type
     are to be bound (`cpubind'), or both.

     The TYPE attribute represents an NDB thread type. The thread types
     supported in MySQL Cluster NDB 7.2 and the range of permitted
     `count' values for each are provided in the following list:

        * `ldm': Local query handler (`DBLQH' kernel block) that handles
          data. The more LDM threads that are used, the more highly
          partitioned the data becomes. Each LDM thread maintains its
          own sets of data and index partitions, as well as its own
          redo log. In MySQL Cluster NDB 7.2, the maximum is 16 such
          threads (in MySQL Cluster NDB 7.1, the maximum was 4).

          Range: 1 - 16.

        * `tc': Transaction coordinator thread (`DBTC' kernel block)
          containing the state of an ongoing transaction. In MySQL
          Cluster NDB 7.2.5 and later, the number of TC threads is
          configurable, with a total of 16 possible.

          Optimally, every new transaction can be assigned to a new TC
          thread. In most cases 1 TC thread per 2 LDM threads is
          sufficient to guarantee that this can happen.  In cases where
          the number of writes is relatively small when compared to the
          number of reads, it is possible that only 1 TC thread per 4
          LQH threads is required to maintain transaction states.
          Conversely, in applications that perform a great many
          updates, it may be necessary for the ratio of TC threads to
          LDM threads to approach 1 (for example, 3 TC threads to 4 LDM
          threads).

          Range: 1 - 16 (always 1 prior to MySQL Cluster 7.2.5).

        * `main': Data dictionary and transaction coordinator (`DBDIH'
          and `DBTC' kernel blocks), providing schema management. This
          is always handled by a single dedicated thread.

          Range: 1 only.

        * `recv': Receive thread (`CMVMI' kernel block). Each receive
          thread handles one or more sockets for communicating with
          other nodes in a MySQL Cluster, with one socket per node.
          Previously, this was limited to a single thread, but MySQL
          Cluster 7.2 implements multiple receive threads (up to 8).

          Range: 1 - 8.

        * `send': Send thread (`CMVMI' kernel block). Added in MySQL
          Cluster NDB 7.2.5. To increase throughput, it is possible in
          MySQL Cluster NDB 7.2.5 and later to perform sends from one
          or more separate, dedicated threads (maximum 8).

          Previously, all threads handled their own sending directly;
          this can still be made to happen by setting the number of
          send threads to 0 (this also happens when
          `MaxNoOfExecutionThreads' is set equal to 9). While doing so
          can have an adeverse impact on throughput, it can also in
          some cases provide decreased latency.

          Range: 0 - 8.

        * `rep': Replication thread (`SUMA' kernel block). Asynchronous
          replication operations are always handled by a
          single.dedicated thread.

          Range: 1 only.

        * `io': File system and other miscellaneous operations. These
          are not demanding tasks, and are always handled as a group by
          a single, dedicated I/O thread.

          Range: 1 only.

Simple examples:

     # Example 1.

     ThreadConfig=ldm={count=2,cpubind=1,2},main={cpubind=12},rep={cpubind=11}

     # Example 2.

     Threadconfig=main={cpubind=0},ldm={count=4,cpubind=1,2,5,6},io={cpubind=3}

It is usually desirable when configuring thread usage for a data node
host to reserve one or more number of CPUs for operating system and
other tasks. Thus, for a host machine with 24 CPUs, you might want to
use 20 CPU threads (leaving 4 for other uses), with 8 LDM threads, 4 TC
threads (half the number of LDM threads), 3 send threads, 3 receive
threads, and 1 thread each for schema management, asynchronous
replication, and I/O operations. (This is almost the same distribution
of threads used when `MaxNoOfExecutionThreads' is set equal to 20.) The
following `ThreadConfig' setting performs these assignments,
additionally binding all of these threads to specific CPUs:

     ThreadConfig=ldm{count=8,cpubind=1,2,3,4,5,6,7,8},main={cpubind=9},io={cpubind=9}, \
     rep={cpubind=10},tc{count=4,cpubind=11,12,13,14},recv={count=3,cpubind=15,16,17}, \
     send{count=3,cpubind=18,19,20}

It should be possible in most cases to bind the main (schema
management) thread and the I/O thread to the same CPU, as we have done
in the example just shown.

In order to take advantage of the enhanced stability that the use of
`ThreadConfig' offers, it is necessary to insure that CPUs are
isolated, and that they not subject to interrupts, or to being
scheduled for other tasks by the operating system. On many Linux
systems, you can do this by setting `IRQBALANCE_BANNED_CPUS' in
`/etc/sysconfig/irqbalance' to `0xFFFFF0', and by using the `isolcpus'
boot option in `grub.conf'. For specific information, see your
operating system or platform documentation.

Disk Data Configuration Parameters

Configuration parameters affecting Disk Data behavior include the
following:

   *  `DiskPageBufferMemory'

     This table provides type and value information for the
     DiskPageBufferMemory data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             64M               4M - 1T
     *Restart Type:* N                                     

     This determines the amount of space used for caching pages on
     disk, and is set in the `[ndbd]' or `[ndbd default]' section of the
     `config.ini' file. It is measured in bytes. Each page takes up 32
     KB. This means that Cluster Disk Data storage always uses N * 32
     KB memory where N is some nonnegative integer.

     The default value for this parameter is `64M' (2000 pages of 32 KB
     each).

     You can query the *Note `ndbinfo.diskpagebuffer':
     mysql-cluster-ndbinfo-diskpagebuffer.  table to help determine
     whether the value for this parameter should be increased to
     minimize unnecessary disk seeks. See *Note
     mysql-cluster-ndbinfo-diskpagebuffer::, for more information.

   *  `SharedGlobalMemory'

     This table provides type and value information for the
     SharedGlobalMemory data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             128M              0 - 64T
     *Restart Type:* N                                     

     This parameter determines the amount of memory that is used for
     log buffers, disk operations (such as page requests and wait
     queues), and metadata for tablespaces, log file groups, `UNDO'
     files, and data files. The shared global memory pool also provides
     memory used for satisfying the memory requirements of the
     `INITIAL_SIZE' and `UNDO_BUFFER_SIZE' options used with *Note
     `CREATE LOGFILE GROUP': create-logfile-group. and *Note `ALTER
     LOGFILE GROUP': alter-logfile-group.  statements, including any
     default value implied for these options by the setting of the
     `InitialLogFileGroup' data node configuration parameter.
     `SharedGlobalMemory' can be set in the `[ndbd]' or `[ndbd
     default]' section of the `config.ini' configuration file, and is
     measured in bytes.

     As of MySQL Cluster NDB 7.2.0, the default value is `128M'.
     (Previously, this was `20M'.)

   *  `DiskIOThreadPool'

     This table provides type and value information for the
     DiskIOThreadPool data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         threads           2                 0 - 4G
     *Restart Type:* N                                     

     This parameter determines the number of unbound threads used for
     Disk Data file access. Before `DiskIOThreadPool' was introduced,
     exactly one thread was spawned for each Disk Data file, which
     could lead to performance issues, particularly when using very
     large data files. With `DiskIOThreadPool', you can--for
     example--access a single large data file using several threads
     working in parallel.

     Currently, this parameter applies to Disk Data I/O threads only,
     but we plan in the future to make the number of such threads
     configurable for in-memory data as well.

     The optimum value for this parameter depends on your hardware and
     configuration, and includes these factors:

        * Physical distribution of Disk Data files

          You can obtain better performance by placing data files, undo
          log files, and the data node file system on separate physical
          disks. If you do this with some or all of these sets of
          files, then you can set `DiskIOThreadPool' higher to enable
          separate threads to handle the files on each disk.

        * Disk performance and types

          The number of threads that can be accommodated for Disk Data
          file handling is also dependent on the speed and throughput
          of the disks. Faster disks and higher throughput allow for
          more disk I/O threads. Our test results indicate that
          solid-state disk drives can handle many more disk I/O threads
          than conventional disks, and thus higher values for
          `DiskIOThreadPool'.

     In MySQL Cluster NDB 7.2, the default value for this parameter is
     2.

   * Disk Data file system parameters

     The parameters in the following list make it possible to place
     MySQL Cluster Disk Data files in specific directories without the
     need for using symbolic links.

        *  `FileSystemPathDD'

          This table provides type and value information for the
          FileSystemPathDD data node configuration parameter

          Effective        Type/Units       Default          Range/Values
          Version                                            
          NDB 7.2.0        filename         [see text]       ...
          *Restart Type:*                                    
          IN                                                 

          If this parameter is specified, then MySQL Cluster Disk Data
          data files and undo log files are placed in the indicated
          directory. This can be overridden for data files, undo log
          files, or both, by specifying values for
          `FileSystemPathDataFiles', `FileSystemPathUndoFiles', or
          both, as explained for these parameters. It can also be
          overridden for data files by specifying a path in the `ADD
          DATAFILE' clause of a *Note `CREATE TABLESPACE':
          create-tablespace. or *Note `ALTER TABLESPACE':
          alter-tablespace.  statement, and for undo log files by
          specifying a path in the `ADD UNDOFILE' clause of a *Note
          `CREATE LOGFILE GROUP': create-logfile-group. or *Note `ALTER
          LOGFILE GROUP': alter-logfile-group.  statement. If
          `FileSystemPathDD' is not specified, then `FileSystemPath' is
          used.

          If a `FileSystemPathDD' directory is specified for a given
          data node (including the case where the parameter is
          specified in the `[ndbd default]' section of the `config.ini'
          file), then starting that data node with `--initial' causes
          all files in the directory to be deleted.

        *  `FileSystemPathDataFiles'

          This table provides type and value information for the
          FileSystemPathDataFiles data node configuration parameter

          Effective        Type/Units       Default          Range/Values
          Version                                            
          NDB 7.2.0        filename         [see text]       ...
          *Restart Type:*                                    
          IN                                                 

          If this parameter is specified, then MySQL Cluster Disk Data
          data files are placed in the indicated directory.  This
          overrides any value set for `FileSystemPathDD'.  This
          parameter can be overridden for a given data file by
          specifying a path in the `ADD DATAFILE' clause of a *Note
          `CREATE TABLESPACE': create-tablespace. or *Note `ALTER
          TABLESPACE': alter-tablespace.  statement used to create that
          data file. If `FileSystemPathDataFiles' is not specified, then
          `FileSystemPathDD' is used (or `FileSystemPath', if
          `FileSystemPathDD' has also not been set).

          If a `FileSystemPathDataFiles' directory is specified for a
          given data node (including the case where the parameter is
          specified in the `[ndbd default]' section of the `config.ini'
          file), then starting that data node with `--initial' causes
          all files in the directory to be deleted.

        *  `FileSystemPathUndoFiles'

          This table provides type and value information for the
          FileSystemPathUndoFiles data node configuration parameter

          Effective        Type/Units       Default          Range/Values
          Version                                            
          NDB 7.2.0        filename         [see text]       ...
          *Restart Type:*                                    
          IN                                                 

          If this parameter is specified, then MySQL Cluster Disk Data
          undo log files are placed in the indicated directory. This
          overrides any value set for `FileSystemPathDD'.  This
          parameter can be overridden for a given data file by
          specifying a path in the `ADD UNDO' clause of a *Note `CREATE
          LOGFILE GROUP': create-logfile-group. or *Note `CREATE
          LOGFILE GROUP': create-logfile-group. statement used to
          create that data file.  If `FileSystemPathUndoFiles' is not
          specified, then `FileSystemPathDD' is used (or
          `FileSystemPath', if `FileSystemPathDD' has also not been
          set).

          If a `FileSystemPathUndoFiles' directory is specified for a
          given data node (including the case where the parameter is
          specified in the `[ndbd default]' section of the `config.ini'
          file), then starting that data node with `--initial' causes
          all files in the directory to be deleted.

     For more information, see *Note mysql-cluster-disk-data-objects::.

   * Disk Data object creation parameters

     The next two parameters enable you--when starting the cluster for
     the first time--to cause a Disk Data log file group, tablespace,
     or both, to be created without the use of SQL statements.

        *  `InitialLogFileGroup'

          This table provides type and value information for the
          InitialLogFileGroup data node configuration parameter

          Effective        Type/Units       Default          Range/Values
          Version                                            
          NDB 7.2.0        string           [see text]       ...
          *Restart Type:*                                    
          S                                                  

          This parameter can be used to specify a log file group that
          is created when performing an initial start of the cluster.
          `InitialLogFileGroup' is specified as shown here:

               InitialLogFileGroup = [name=NAME;] [undo_buffer_size=SIZE;] FILE-SPECIFICATION-LIST

               FILE-SPECIFICATION-LIST:
                   FILE-SPECIFICATION[; FILE-SPECIFICATION[; ...]]

               FILE-SPECIFICATION:
                   FILENAME:SIZE

          The `name' of the log file group is optional and defaults to
          `DEFAULT-LG'.  The `undo_buffer_size' is also optional; if
          omitted, it defaults to `64M'. Each FILE-SPECIFICATION
          corresponds to an undo log file, and at least one must be
          specified in the FILE-SPECIFICATION-LIST. Undo log files are
          placed according to any values that have been set for
          `FileSystemPath', `FileSystemPathDD', and
          `FileSystemPathUndoFiles', just as if they had been created
          as the result of a *Note `CREATE LOGFILE GROUP':
          create-logfile-group. or *Note `ALTER LOGFILE GROUP':
          alter-logfile-group.  statement.

          Consider the following:

               InitialLogFileGroup = name=LG1; undo_buffer_size=128M; undo1.log:250M; undo2.log:150M

          This is equivalent to the following SQL statements:

               CREATE LOGFILE GROUP LG1
                   ADD UNDOFILE 'undo1.log'
                   INITIAL_SIZE 250M
                   UNDO_BUFFER_SIZE 128M
                   ENGINE NDBCLUSTER;

               ALTER LOGFILE GROUP LG1
                   ADD UNDOFILE 'undo2.log'
                   INITIAL_SIZE 150M
                   ENGINE NDBCLUSTER;

          This logfile group is created when the data nodes are started
          with `--initial'.

          Resources for the initial log file group are taken from the
          global memory pool whose size is determined by the value of
          the `SharedGlobalMemory' data node configuration parameter;
          if this parameter is set too low and the values set in
          `InitialLogFileGroup' for the logfile group's initial size or
          undo buffer size are too high, the cluster may fail to create
          the default log file group when starting, or fail to start
          altogether.

          This parameter, if used, should always be set in the `[ndbd
          default]' section of the `config.ini' file. The behavior of a
          MySQL Cluster when different values are set on different data
          nodes is not defined.

        *  `InitialTablespace'

          This table provides type and value information for the
          InitialTablespace data node configuration parameter

          Effective        Type/Units       Default          Range/Values
          Version                                            
          NDB 7.2.0        string           [see text]       ...
          *Restart Type:*                                    
          S                                                  

          This parameter can be used to specify a MySQL Cluster Disk
          Data tablespace that is created when performing an initial
          start of the cluster.  `InitialTablespace' is specified as
          shown here:

               InitialTablespace = [name=NAME;] [extent_size=SIZE;] FILE-SPECIFICATION-LIST

          The `name' of the tablespace is optional and defaults to
          `DEFAULT-TS'.  The `extent_size' is also optional; it
          defaults to `1M'. The FILE-SPECIFICATION-LIST uses the same
          syntax as shown with the `InitialLogfileGroup' parameter, the
          only difference being that each FILE-SPECIFICATION used with
          `InitialTablespace' corresponds to a data file. At least one
          must be specified in the FILE-SPECIFICATION-LIST. Data files
          are placed according to any values that have been set for
          `FileSystemPath', `FileSystemPathDD', and
          `FileSystemPathDataFiles', just as if they had been created
          as the result of a *Note `CREATE TABLESPACE':
          create-tablespace. or *Note `ALTER TABLESPACE':
          alter-tablespace.  statement.

          For example, consider the following line specifying
          `InitialTablespace' in the `[ndbd default]' section of the
          `config.ini' file (as with `InitialLogfileGroup', this
          parameter should always be set in the `[ndbd default]'
          section, as the behavior of a MySQL Cluster when different
          values are set on different data nodes is not defined):

               InitialTablespace = name=TS1; extent_size=8M; data1.dat:2G; data2.dat:4G

          This is equivalent to the following SQL statements:

               CREATE TABLESPACE TS1
                   ADD DATAFILE 'data1.dat'
                   EXTENT_SIZE 8M
                   INITIAL_SIZE 2G
                   ENGINE NDBCLUSTER;

               ALTER TABLESPACE TS1
                   ADD UNDOFILE 'data2.dat'
                   INITIAL_SIZE 4G
                   ENGINE NDBCLUSTER;

          This tablespace is created when the data nodes are started
          with `--initial', and can be used whenever creating MySQL
          Cluster Disk Data tables thereafter.

Disk Data and `GCP Stop' errors

Errors encountered when using Disk Data tables such as `Node NODEID
killed this node because GCP stop was detected' (error 2303) are often
referred to as `GCP stop errors'. Such errors occur when the redo log
is not flushed to disk quickly enough; this is usually due to slow
disks and insufficient disk throughput.

You can help prevent these errors from occurring by using faster disks,
and by placing Disk Data files on a separate disk from the data node
file system. Reducing the value of `TimeBetweenGlobalCheckpoints' tends
to decrease the amount of data to be written for each global
checkpoint, and so may provide some protection against redo log buffer
overflows when trying to write a global checkpoint; however, reducing
this value also permits less time in which to write the GCP, so this
must be done with caution.

In addition to the considerations given for `DiskPageBufferMemory' as
explained previously, it is also very important that the
`DiskIOThreadPool' configuration parameter be set correctly; having
`DiskIOThreadPool' set too high is very likely to cause GCP stop errors
(Bug #37227).

GCP stops can be caused by save or commit timeouts; the
`TimeBetweenEpochsTimeout' data node configuration parameter determines
the timeout for commits. However, it is possible to disable both types
of timeouts by setting this parameter to 0.

Parameters for configuring send buffer memory allocation

Send buffer memory is allocated dynamically from a memory pool shared
between all transporters, which means that the size of the send buffer
can be adjusted as necessary. (Previously, the NDB kernel used a
fixed-size send buffer for every node in the cluster, which was
allocated when the node started and could not be changed while the node
was running.) The `TotalSendBufferMemory' and `OverLoadLimit' data node
configuration parameters permit the setting of limits on this memory
allocation. For more information about the use of these parameters (as
well as `SendBufferMemory'), see *Note
mysql-cluster-config-send-buffers::.

   *  `ExtraSendBufferMemory'

     This parameter specifies the amount of transporter send buffer
     memory to allocate in addition to any set using
     `TotalSendBufferMemory', `SendBufferMemory', or both.

     This parameter was added in MySQL Cluster NDB 7.2.5. (Bug
     #11760629, Bug #53053)

   *  `TotalSendBufferMemory'

     This parameter is available beginning with MySQL Cluster NDB
     6.4.0. It is used to determine the total amount of memory to
     allocate on this node for shared send buffer memory among all
     configured transporters.

     Prior to MySQL Cluster NDB 7.2.5, this parameter did not work
     correctly with *Note `ndbmtd': mysql-cluster-programs-ndbmtd. (Bug
     #13633845)

     If this parameter is set, its minimum permitted value is 256KB;
     the maxmimum is 4294967039.

   *  `ReservedSendBufferMemory'

     This parameter is present in *Note `NDBCLUSTER': mysql-cluster.
     source code beginning with MySQL Cluster NDB 6.4.0. However, it is
     not currently enabled.

     As of MySQL Cluster NDB 7.2.5, this parameter is deprecated, and
     is subject to removal in a future release of MySQL Cluster (Bug
     #11760629, Bug #53053).

For more detailed information about the behavior and use of
`TotalSendBufferMemory'

and about configuring send buffer memory parameters in MySQL Cluster,
see *Note mysql-cluster-config-send-buffers::.

See also *Note mysql-cluster-online-add-node::.

Redo log over-commit handling

It is possible to control a data node's handling of operations when too
much time is taken flushing redo logs to disk. This occurs when a given
redo log flush takes longer than `RedoOverCommitLimit' seconds, more
than `RedoOverCommitCounter' times, causing any pending transactions to
be aborted. When this happens, the API node that sent the transaction
can handle the operations that should have been committed either by
queuing the operations and re-trying them, or by aborting them, as
determined by `DefaultOperationRedoProblemAction'.  The data node
configuration parameters for setting the timeout and number of times it
may be exceeded before the API node takes this action are described in
the following list:

   *  `RedoOverCommitCounter'

     This table provides type and value information for the
     RedoOverCommitCounter data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         numeric           3                 0 - 4G
     *Restart Type:* N                                     

     When `RedoOverCommitLimit' is exceeded when trying to write a
     given redo log to disk this many times or more, any transactions
     that were not committed as a result are aborted, and an API node
     where any of these transactions originated handles the operations
     making up those transactions according to its value for
     `DefaultOperationRedoProblemAction' (by either queuing the
     operations to be re-tried, or aborting them).

     `RedoOverCommitCounter' defaults to 3. Set it to 0 to disable the
     limit.

   *  `RedoOverCommitLimit'

     This table provides type and value information for the
     RedoOverCommitLimit data node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         seconds           20                0 - 4G
     *Restart Type:* N                                     

     This parameter sets an upper limit in seconds for trying to write
     a given redo log to disk before timing out. The number of times
     the data node tries to flush this redo log, but takes longer than
     `RedoOverCommitLimit', is kept and compared with
     `RedoOverCommitCounter', and when flushing takes too long more
     times than the value of that parameter, any transactions that were
     not committed as a result of the flush timeout are aborted. When
     this occurs, the API node where any of these transactions
     originated handles the operations making up those transactions
     according to its `DefaultOperationRedoProblemAction' setting (it
     either queues the operations to be re-tried, or aborts them).

     By default, `RedoOverCommitLimit' is 20 seconds. Set to 0 to
     disable checking for redo log flush timeouts. This parameter was
     added in MySQL Cluster NDB 7.1.10.

Controlling restart attempts

It is possible to exercise finely-grained control over restart attempts
by data nodes when they fail to start using the `MaxStartFailRetries'
and `StartFailRetryDelay' data node configuration parameters.

`MaxStartFailRetries' limits the total number of retries made before
giving up on starting the data node, `StartFailRetryDelay' sets the
number of seconds between retry attempts. These parameters are
described in more detail in the next few paragraphs.

`StartFailRetryDelay'

This table provides type and value information for the
StartFailRetryDelay data node configuration parameter

Effective Version  Type/Units         Default            Range/Values
NDB 7.2.0          unsigned           0                  0 - 4G
*Restart Type:* N                                        

Use this parameter to set the number of seconds between restart
attempts by the data node in the event on failure on startup.  The
default is 0 (no delay).

*Note*:

This parameter is ignored unless `StopOnError' is equal to 0.

`MaxStartFailRetries'

This table provides type and value information for the
MaxStartFailRetries data node configuration parameter

Effective Version  Type/Units         Default            Range/Values
NDB 7.2.0          unsigned           3                  0 - 4G
*Restart Type:* N                                        

Use this parameter to limit the number restart attempts made by the
data node in the event that it fails on startup. The default is 3
attempts.

*Note*:

This parameter is ignored unless `StopOnError' is equal to 0.


File: manual.info,  Node: mysql-cluster-api-definition,  Next: mysql-cluster-tcp-definition,  Prev: mysql-cluster-ndbd-definition,  Up: mysql-cluster-config-file

17.3.2.7 Defining SQL and Other API Nodes in a MySQL Cluster
............................................................

The `[mysqld]' and `[api]' sections in the `config.ini' file define the
behavior of the MySQL servers (SQL nodes) and other applications (API
nodes) used to access cluster data. None of the parameters shown is
required. If no computer or host name is provided, any host can use
this SQL or API node.

Generally speaking, a `[mysqld]' section is used to indicate a MySQL
server providing an SQL interface to the cluster, and an `[api]'
section is used for applications other than *Note `mysqld': mysqld.
processes accessing cluster data, but the two designations are actually
synonymous; you can, for instance, list parameters for a MySQL server
acting as an SQL node in an `[api]' section.

*Note*:

For a discussion of MySQL server options for MySQL Cluster, see *Note
mysql-cluster-program-options-mysqld::; for information about MySQL
server system variables relating to MySQL Cluster, see *Note
mysql-cluster-system-variables::.

   *  `Id'

     This table provides type and value information for the Id API node
     configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          [none]            1 - 255
     *Restart Type:*                                       
     IS                                                    

     The `Id' is an integer value used to identify the node in all
     cluster internal messages. The permitted range of values is 1 to
     255 inclusive. This value must be unique for each node in the
     cluster, regardless of the type of node.

     *Note*:

     Data node IDs must be less than 49, regardless of the MySQL
     Cluster version used. If you plan to deploy a large number of data
     nodes, it is a good idea to limit the node IDs for API nodes (and
     management nodes) to values greater than 48.

     `NodeId' is the preferred parameter name to use when identifying
     API nodes.  (`Id' continues to be supported for backward
     compatibility, but is now deprecated and generates a warning when
     used. It is also subject to future removal.)

   *  `NodeId'

     This table provides type and value information for the NodeId API
     node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          [none]            1 - 255
     *Restart Type:*                                       
     IS                                                    

     The `NodeId' is an integer value used to identify the node in all
     cluster internal messages. The permitted range of values is 1 to
     255 inclusive. This value must be unique for each node in the
     cluster, regardless of the type of node.

     *Note*:

     Data node IDs must be less than 49, regardless of the MySQL
     Cluster version used. If you plan to deploy a large number of data
     nodes, it is a good idea to limit the node IDs for API nodes (and
     management nodes) to values greater than 48.

     `NodeId' is the preferred parameter name to use when identifying
     management nodes in MySQL Cluster NDB 7.2 and later. Previously,
     `Id' was used for this purpose and this continues to be supported
     for backward compatibility.  `Id' is now deprecated and generates a
     warning when used; it is subject to removal in a future release of
     MySQL Cluster.

   *  `ExecuteOnComputer'

     This table provides type and value information for the
     ExecuteOnComputer API node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         name              [none]            ...
     *Restart Type:* S                                     

     This refers to the `Id' set for one of the computers (hosts)
     defined in a `[computer]' section of the configuration file.

   *  `HostName'

     This table provides type and value information for the HostName
     API node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         name or IP        [none]            ...
                       address                             
     *Restart Type:* S                                     

     Specifying this parameter defines the hostname of the computer on
     which the SQL node (API node) is to reside. To specify a hostname,
     either this parameter or `ExecuteOnComputer' is required.

     If no `HostName' or `ExecuteOnComputer' is specified in a given
     `[mysql]' or `[api]' section of the `config.ini' file, then an SQL
     or API node may connect using the corresponding `slot' from any
     host which can establish a network connection to the management
     server host machine.  _This differs from the default behavior for
     data nodes, where `localhost' is assumed for `HostName' unless
     otherwise specified_.

   *  `ArbitrationRank'

     This table provides type and value information for the
     ArbitrationRank API node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         0-2               0                 0 - 2
     *Restart Type:* N                                     

     This parameter defines which nodes can act as arbitrators.  Both
     management nodes and SQL nodes can be arbitrators. A value of 0
     means that the given node is never used as an arbitrator, a value
     of 1 gives the node high priority as an arbitrator, and a value of
     2 gives it low priority. A normal configuration uses the
     management server as arbitrator, setting its `ArbitrationRank' to
     1 (the default for management nodes) and those for all SQL nodes to
     0 (the default for SQL nodes).

     By setting `ArbitrationRank' to 0 on all management and SQL nodes,
     you can disable arbitration completely. You can also control
     arbitration by overriding this parameter; to do so, set the
     `Arbitration' parameter in the `[ndbd default]' section of the
     `config.ini' global configuration file.

   *  `ArbitrationDelay'

     This table provides type and value information for the
     ArbitrationDelay API node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         milliseconds      0                 0 - 4G
     *Restart Type:* N                                     

     Setting this parameter to any other value than 0 (the default)
     means that responses by the arbitrator to arbitration requests
     will be delayed by the stated number of milliseconds. It is
     usually not necessary to change this value.

   *  `BatchByteSize'

     This table provides type and value information for the
     BatchByteSize API node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             32K               1024 - 1M
     NDB 7.2.1         bytes             16K               1024 - 1M
     *Restart Type:* N                                     

     For queries that are translated into full table scans or range
     scans on indexes, it is important for best performance to fetch
     records in properly sized batches. It is possible to set the
     proper size both in terms of number of records (`BatchSize') and in
     terms of bytes (`BatchByteSize'). The actual batch size is limited
     by both parameters.

     The speed at which queries are performed can vary by more than 40%
     depending upon how this parameter is set.

     This parameter is measured in bytes; the default value is 32K.

   *  `BatchSize'

     This table provides type and value information for the BatchSize
     API node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         records           64                1 - 992
     NDB 7.2.1         records           256               1 - 992
     *Restart Type:* N                                     

     This parameter is measured in number of records and is by default
     set to 256 (MySQL Cluster NDB 7.2.1 and later; previously, the
     default was 64). The maximum size is 992.

   *  `ExtraSendBufferMemory'

     This table provides type and value information for the
     ExtraSendBufferMemory API node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             0                 0 - 32G
     *Restart Type:* N                                     

     This parameter specifies the amount of transporter send buffer
     memory to allocate in addition to any that has been set using
     `TotalSendBufferMemory', `SendBufferMemory', or both.

     This parameter was added in MySQL Cluster NDB 7.2.14. (Bug
     #14555359)

   *  `HeartbeatThreadPriority'

     This table provides type and value information for the
     HeartbeatThreadPriority API node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         string            [none]            ...
     *Restart Type:* S                                     

     Use this parameter to set the scheduling policy and priority of
     heartbeat threads for management and API nodes. The syntax for
     setting this parameter is shown here:

          HeartbeatThreadPriority = POLICY[, PRIORITY]

          POLICY:
            {FIFO | RR}

     When setting this parameter, you must specify a policy. This is
     one of `FIFO' (first in, first in) or `RR' (round robin). This
     followed optionally by the priority (an integer).

   *  `MaxScanBatchSize'

     This table provides type and value information for the
     MaxScanBatchSize API node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             256K              32K - 16M
     *Restart Type:* N                                     

     The batch size is the size of each batch sent from each data node.
     Most scans are performed in parallel to protect the MySQL Server
     from receiving too much data from many nodes in parallel; this
     parameter sets a limit to the total batch size over all nodes.

     The default value of this parameter is set to 256KB. Its maximum
     size is 16MB.

   *  `TotalSendBufferMemory'

     This table provides type and value information for the
     TotalSendBufferMemory API node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             256K              0 - 4G
     *Restart Type:* N                                     

     This parameter is available beginning with MySQL Cluster NDB
     6.4.0. It is used to determine the total amount of memory to
     allocate on this node for shared send buffer memory among all
     configured transporters.

     If this parameter is set, its minimum permitted value is 256KB;
     the maxmimum is 4294967039. For more detailed information about
     the behavior and use of `TotalSendBufferMemory' and configuring
     send buffer memory parameters in MySQL Cluster, see *Note
     mysql-cluster-config-send-buffers::.

   *  `AutoReconnect'

     This table provides type and value information for the
     AutoReconnect API node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         boolean           false             true, false
     *Restart Type:* N                                     

     This parameter is `false' by default. This forces disconnected API
     nodes (including MySQL Servers acting as SQL nodes) to use a new
     connection to the cluster rather than attempting to re-use an
     existing one, as re-use of connections can cause problems when
     using dynamically-allocated node IDs. (Bug #45921)

     *Note*:

     This parameter can be overridden using the NDB API. For more
     information, see `Ndb_cluster_connection::set_auto_reconnect()'
     (http://dev.mysql.com/doc/ndbapi/en/ndb-ndb-cluster-connection-methods.html#ndb-ndb-cluster-connection-set-auto-reconnect),
     and `Ndb_cluster_connection::get_auto_reconnect()'
     (http://dev.mysql.com/doc/ndbapi/en/ndb-ndb-cluster-connection-methods.html#ndb-ndb-cluster-connection-get-auto-reconnect).

   *  `DefaultOperationRedoProblemAction'

     This table provides type and value information for the
     DefaultOperationRedoProblemAction API node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         enumeration       ABORT             ABORT, QUEUE
     NDB 7.2.1         enumeration       ABORT             ABORT, QUEUE
     NDB 7.2.10        enumeration       QUEUE             ABORT, QUEUE
     *Restart Type:* S                                     

     This parameter (along with `RedoOverCommitLimit' and
     `RedoOverCommitCounter') controls the data node's handling of
     operations when too much time is taken flushing redo logs to disk.
     This occurs when a given redo log flush takes longer than
     `RedoOverCommitLimit' seconds, more than `RedoOverCommitCounter'
     times, causing any pending transactions to be aborted.

     When this happens, the node can respond in either of two ways,
     according to the value of `DefaultOperationRedoProblemAction',
     listed here:

        * `ABORT': Any pending operations from aborted transactions are
          also aborted.

        * `QUEUE': Pending operations from transactions that were
          aborted are queued up to be re-tried.

     Prior to MySQL Cluster NDB 7.2.10, setting this parameter did not
     have any effect. (Bug #15855588)

   *  `DefaultHashMapSize'

     This table provides type and value information for the
     DefaultHashMapSize API node configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         LDM threads       240               0 - 3840
     NDB 7.2.11        LDM threads       3840              0 - 3840
     *Restart Type:* N                                     

     MySQL Cluster NDB 7.2.7 and later use a larger default table hash
     map size (3840) than in previous releases (240).  Beginning with
     MySQL Cluster NDB 7.2.11, the size of the table hash maps used by
     *Note `NDB': mysql-cluster. is configurable using this parameter;
     previously this value was hard-coded. `DefaultHashMapSize' can take
     any of three possible values (0, 240, 3840). These values and
     their effects are described in the following table.

     DefaultHashMapSize parameter values and their effects

     Value         Description / Effect
     `0'           Use the lowest value set, if any, for this parameter
                   among all data nodes and API nodes in the cluster; if
                   it is not set on any data or API node, use the
                   default value.
     `240'         Original hash map size, used by default in all MySQL
                   Cluster releases prior to MySQL Cluster NDB 7.2.7.
     `3840'        Larger hash map size as used by default in MySQL
                   Cluster NDB 7.2.7 and later

     The primary intended use for this parameter is to facilitate
     upgrades and especially downgrades between MySQL Cluster NDB 7.2.7
     and later MySQL Cluster versions, in which the larger hash map
     size (3840) is the default, and earlier releases (in which the
     default was 240), due to the fact that this change is not
     otherwise backward compatible (Bug #14800539).  By setting this
     parameter to 240 prior to performing an upgrade from an older
     version where this value is in use, you can cause the cluster to
     continue using the smaller size for table hash maps, in which case
     the tables remain compatible with earlier versions following the
     upgrade.  `DefaultHashMapSize' can be set for individual data
     nodes, API nodes, or both, but setting it once only, in the `[ndbd
     default]' section of the `config.ini' file, is the recommended
     practice.

     After increasing this parameter, to have existing tables to take
     advantage of the new size, you can run *Note `ALTER TABLE ...
     REORGANIZE PARTITION': alter-table-partition-operations. on them,
     after which they can use the larger hash map size. This is in
     addition to performing a rolling restart, which makes the larger
     hash maps available to new tables, but does not enable existing
     tables to use them.

     Decreasing this parameter online after any tables have been
     created or modified with `DefaultHashMapSize' equal to 3840 is not
     currently supported.

You can obtain some information from a MySQL server running as a
Cluster SQL node using *Note `SHOW STATUS': show-status. in the `mysql'
client, as shown here:

     mysql> SHOW STATUS LIKE 'ndb%';
     +-----------------------------+---------------+
     | Variable_name               | Value         |
     +-----------------------------+---------------+
     | Ndb_cluster_node_id         | 5             |
     | Ndb_config_from_host        | 192.168.0.112 |
     | Ndb_config_from_port        | 1186          |
     | Ndb_number_of_storage_nodes | 4             |
     +-----------------------------+---------------+
     4 rows in set (0.02 sec)

For information about these Cluster system status variables, see *Note
server-status-variables::.

*Note*:

To add new SQL or API nodes to the configuration of a running MySQL
Cluster, it is necessary to perform a rolling restart of all cluster
nodes after adding new `[mysqld]' or `[api]' sections to the
`config.ini' file (or files, if you are using more than one management
server). This must be done before the new SQL or API nodes can connect
to the cluster.

It is _not_ necessary to perform any restart of the cluster if new SQL
or API nodes can employ previously unused API slots in the cluster
configuration to connect to the cluster.


File: manual.info,  Node: mysql-cluster-tcp-definition,  Next: mysql-cluster-tcp-definition-direct,  Prev: mysql-cluster-api-definition,  Up: mysql-cluster-config-file

17.3.2.8 MySQL Cluster TCP/IP Connections
.........................................

TCP/IP is the default transport mechanism for all connections between
nodes in a MySQL Cluster. Normally it is not necessary to define TCP/IP
connections; MySQL Cluster automatically sets up such connections for
all data nodes, management nodes, and SQL or API nodes.

*Note*:

For an exception to this rule, see *Note
mysql-cluster-tcp-definition-direct::.

To override the default connection parameters, it is necessary to
define a connection using one or more `[tcp]' sections in the
`config.ini' file. Each `[tcp]' section explicitly defines a TCP/IP
connection between two MySQL Cluster nodes, and must contain at a
minimum the parameters `NodeId1' and `NodeId2', as well as any
connection parameters to override.

It is also possible to change the default values for these parameters
by setting them in the `[tcp default]' section.

*Important*:

Any `[tcp]' sections in the `config.ini' file should be listed _last_,
following all other sections in the file. However, this is not required
for a `[tcp default]' section. This requirement is a known issue with
the way in which the `config.ini' file is read by the MySQL Cluster
management server.

Connection parameters which can be set in `[tcp]' and `[tcp default]'
sections of the `config.ini' file are listed here:

   * `NodeId1'

     This table provides type and value information for the NodeId1 TCP
     configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         numeric           [none]            ...
     *Restart Type:* N                                     

     `NodeId2'

     This table provides type and value information for the NodeId2 TCP
     configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         numeric           [none]            ...
     *Restart Type:* N                                     

     To identify a connection between two nodes it is necessary to
     provide their node IDs in the `[tcp]' section of the configuration
     file. These are the same unique `NodeId' (or `Id') values for each
     of these nodes as described in *Note
     mysql-cluster-api-definition::.

   * `HostName1'

     This table provides type and value information for the HostName1
     TCP configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         name or IP        [none]            ...
                       address                             
     *Restart Type:* N                                     

     `HostName2'

     This table provides type and value information for the HostName1
     TCP configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         name or IP        [none]            ...
                       address                             
     *Restart Type:* N                                     

     The `HostName1' and `HostName2' parameters can be used to specify
     specific network interfaces to be used for a given TCP connection
     between two nodes. The values used for these parameters can be
     hostnames or IP addresses.

   *  `OverloadLimit'

     This table provides type and value information for the
     OverloadLimit TCP configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             0                 0 - 4G
     *Restart Type:* N                                     

     When more than this many unsent bytes are in the send buffer, the
     connection is considered overloaded.

     This parameter can be used to determine the amount of unsent data
     that must be present in the send buffer before the connection is
     considered overloaded. See *Note
     mysql-cluster-config-send-buffers::, for more information.

     In some older releases, the effective value of this parameter was
     limited by the size of `SendBufferMemory'; in MySQL Cluster NDB
     7.2, the actual value for `OverloadLimit' (up to the stated maximum
     of 4G) is used instead.

   *  `SendBufferMemory'

     This table provides type and value information for the
     SendBufferMemory TCP configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          2M                256K - 4G
     *Restart Type:* N                                     

     TCP transporters use a buffer to store all messages before
     performing the send call to the operating system. When this buffer
     reaches 64KB its contents are sent; these are also sent when a
     round of messages have been executed. To handle temporary overload
     situations it is also possible to define a bigger send buffer.

     If this parameter is set explicitly, then the memory is not
     dedicated to each transporter; instead, the value used denotes the
     hard limit for how much memory (out of the total available
     memory--that is, `TotalSendBufferMemory') that may be used by a
     single transporter. For more information about configuring dynamic
     transporter send buffer memory allocation in MySQL Cluster, see
     *Note mysql-cluster-config-send-buffers::.

     The default size of the send buffer in MySQL Cluster NDB 7.2 is
     2MB, which is the size recommended in most situations.  The
     minimum size is 64 KB; the theoretical maximum is 4 GB.

   *  `SendSignalId'

     This table provides type and value information for the
     SendSignalId TCP configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         boolean           [see text]        true, false
     *Restart Type:* N                                     

     To be able to retrace a distributed message datagram, it is
     necessary to identify each message. When this parameter is set to
     `Y', message IDs are transported over the network. This feature is
     disabled by default in production builds, and enabled in `-debug'
     builds.

   *  `Checksum'

     This table provides type and value information for the Checksum
     TCP configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         boolean           false             true, false
     *Restart Type:* N                                     

     This parameter is a boolean parameter (enabled by setting it to
     `Y' or `1', disabled by setting it to `N' or `0').  It is disabled
     by default. When it is enabled, checksums for all messages are
     calculated before they placed in the send buffer. This feature
     ensures that messages are not corrupted while waiting in the send
     buffer, or by the transport mechanism.

   *  `PortNumber' (_OBSOLETE_)

     This formerly specified the port number to be used for listening
     for connections from other nodes. This parameter should no longer
     be used; use the `ServerPort' data node configuration parameter
     for this purpose instead.

   *  `ReceiveBufferMemory'

     This table provides type and value information for the
     ReceiveBufferMemory TCP configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             2M                16K - 4G
     *Restart Type:* N                                     

     Specifies the size of the buffer used when receiving data from the
     TCP/IP socket.

     The default value of this parameter is 2MB. The minimum possible
     value is 16KB; the theoretical maximum is 4GB.

   *  `TCP_RCV_BUF_SIZE'

     This table provides type and value information for the
     TCP_RCV_BUF_SIZE TCP configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          70080             1 - 2G
     *Restart Type:* N                                     

     Determines the size of the receive buffer set during TCP
     transporter initialization. The default is recommended for most
     common usage cases.

   *  `TCP_SND_BUF_SIZE'

     This table provides type and value information for the
     TCP_SND_BUF_SIZE TCP configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          71540             1 - 2G
     *Restart Type:* N                                     

     Determines the size of the send buffer set during TCP transporter
     initialization. The default is recommended for most common usage
     cases.


File: manual.info,  Node: mysql-cluster-tcp-definition-direct,  Next: mysql-cluster-shm-definition,  Prev: mysql-cluster-tcp-definition,  Up: mysql-cluster-config-file

17.3.2.9 MySQL Cluster TCP/IP Connections Using Direct Connections
..................................................................

Setting up a cluster using direct connections between data nodes
requires specifying explicitly the crossover IP addresses of the data
nodes so connected in the `[tcp]' section of the cluster `config.ini'
file.

In the following example, we envision a cluster with at least four
hosts, one each for a management server, an SQL node, and two data
nodes. The cluster as a whole resides on the `172.23.72.*' subnet of a
LAN. In addition to the usual network connections, the two data nodes
are connected directly using a standard crossover cable, and
communicate with one another directly using IP addresses in the
`1.1.0.*' address range as shown:

     # Management Server
     [ndb_mgmd]
     Id=1
     HostName=172.23.72.20

     # SQL Node
     [mysqld]
     Id=2
     HostName=172.23.72.21

     # Data Nodes
     [ndbd]
     Id=3
     HostName=172.23.72.22

     [ndbd]
     Id=4
     HostName=172.23.72.23

     # TCP/IP Connections
     [tcp]
     NodeId1=3
     NodeId2=4
     HostName1=1.1.0.1
     HostName2=1.1.0.2

The `HostName1' and `HostName2' parameters are used only when
specifying direct connections.

The use of direct TCP connections between data nodes can improve the
cluster's overall efficiency by enabling the data nodes to bypass an
Ethernet device such as a switch, hub, or router, thus cutting down on
the cluster's latency. It is important to note that to take the best
advantage of direct connections in this fashion with more than two data
nodes, you must have a direct connection between each data node and
every other data node in the same node group.


File: manual.info,  Node: mysql-cluster-shm-definition,  Next: mysql-cluster-sci-definition,  Prev: mysql-cluster-tcp-definition-direct,  Up: mysql-cluster-config-file

17.3.2.10 MySQL Cluster Shared-Memory Connections
.................................................

MySQL Cluster attempts to use the shared memory transporter and
configure it automatically where possible.  `[shm]' sections in the
`config.ini' file explicitly define shared-memory connections between
nodes in the cluster. When explicitly defining shared memory as the
connection method, it is necessary to define at least `NodeId1',
`NodeId2', and `ShmKey'. All other parameters have default values that
should work well in most cases.

*Important*:

_SHM functionality is considered experimental only_. It is not
officially supported in any current MySQL Cluster release, and testing
results indicate that SHM performance is not appreciably greater than
when using TCP/IP for the transporter.

For these reasons, you must determine for yourself or by using our free
resources (forums, mailing lists) whether SHM can be made to work
correctly in your specific case.

   *  `NodeId1'

     This table provides type and value information for the NodeId1
     shared memory configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         numeric           [none]            ...
     *Restart Type:* N                                     

     `NodeId2'

     This table provides type and value information for the NodeId2
     shared memory configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         numeric           [none]            ...
     *Restart Type:* N                                     

     To identify a connection between two nodes it is necessary to
     provide node identifiers for each of them, as `NodeId1' and
     `NodeId2'.

   *  `HostName1'

     This table provides type and value information for the HostName1
     shared memory configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         name or IP        [none]            ...
                       address                             
     *Restart Type:* N                                     

     `HostName2'

     This table provides type and value information for the HostName1
     shared memory configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         name or IP        [none]            ...
                       address                             
     *Restart Type:* N                                     

     The `HostName1' and `HostName2' parameters can be used to specify
     specific network interfaces to be used for a given SHM connection
     between two nodes. The values used for these parameters can be
     hostnames or IP addresses.

   *  `ShmKey'

     This table provides type and value information for the ShmKey
     shared memory configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          [none]            0 - 4G
     *Restart Type:* N                                     

     When setting up shared memory segments, a node ID, expressed as an
     integer, is used to identify uniquely the shared memory segment to
     use for the communication. There is no default value.

   *  `ShmSize'

     This table provides type and value information for the ShmSize
     shared memory configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             1M                64K - 4G
     *Restart Type:* N                                     

     Each SHM connection has a shared memory segment where messages
     between nodes are placed by the sender and read by the reader. The
     size of this segment is defined by `ShmSize'. The default value is
     1MB.

   *  `SendSignalId'

     This table provides type and value information for the
     SendSignalId shared memory configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         boolean           false             true, false
     *Restart Type:* N                                     

     To retrace the path of a distributed message, it is necessary to
     provide each message with a unique identifier.  Setting this
     parameter to `Y' causes these message IDs to be transported over
     the network as well. This feature is disabled by default in
     production builds, and enabled in `-debug' builds.

   *  `Checksum'

     This table provides type and value information for the Checksum
     shared memory configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         boolean           true              true, false
     *Restart Type:* N                                     

     This parameter is a boolean (`Y'/`N') parameter which is disabled
     by default. When it is enabled, checksums for all messages are
     calculated before being placed in the send buffer.

     This feature prevents messages from being corrupted while waiting
     in the send buffer. It also serves as a check against data being
     corrupted during transport.

   *  `SigNum'

     This table provides type and value information for the Signum
     shared memory configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          [none]            0 - 4G
     *Restart Type:* N                                     

     When using the shared memory transporter, a process sends an
     operating system signal to the other process when there is new
     data available in the shared memory. Should that signal conflict
     with with an existing signal, this parameter can be used to change
     it. This is a possibility when using SHM due to the fact that
     different operating systems use different signal numbers.

     The default value of `SigNum' is 0; therefore, it must be set to
     avoid errors in the cluster log when using the shared memory
     transporter. Typically, this parameter is set to 10 in the `[shm
     default]' section of the `config.ini' file.


File: manual.info,  Node: mysql-cluster-sci-definition,  Next: mysql-cluster-config-send-buffers,  Prev: mysql-cluster-shm-definition,  Up: mysql-cluster-config-file

17.3.2.11 SCI Transport Connections in MySQL Cluster
....................................................

`[sci]' sections in the `config.ini' file explicitly define SCI
(Scalable Coherent Interface) connections between cluster nodes.  Using
SCI transporters in MySQL Cluster is supported only when the MySQL
binaries are built using `--with-ndb-sci=/YOUR/PATH/TO/SCI'.  The PATH
should point to a directory that contains at a minimum `lib' and
`include' directories containing SISCI libraries and header files. (See
*Note mysql-cluster-interconnects:: for more information about SCI.)

In addition, SCI requires specialized hardware.

It is strongly recommended to use SCI Transporters only for
communication between *Note `ndbd': mysql-cluster-programs-ndbd.
processes. Note also that using SCI Transporters means that the *Note
`ndbd': mysql-cluster-programs-ndbd. processes never sleep. For this
reason, SCI Transporters should be used only on machines having at least
two CPUs dedicated for use by *Note `ndbd':
mysql-cluster-programs-ndbd. processes.  There should be at least one
CPU per *Note `ndbd': mysql-cluster-programs-ndbd.  process, with at
least one CPU left in reserve to handle operating system activities.

   *  `NodeId1'

     This table provides type and value information for the NodeId1 SCI
     configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         numeric           [none]            ...
     *Restart Type:* N                                     

     `NodeId2'

     This table provides type and value information for the NodeId2 SCI
     configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         numeric           [none]            ...
     *Restart Type:* N                                     

     To identify a connection between two nodes it is necessary to
     provide node identifiers for each of them, as `NodeId1' and
     `NodeId2'.

   *  `Host1SciId0'

     This table provides type and value information for the Host1SciId0
     SCI configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          [none]            0 - 4G
     *Restart Type:* N                                     

     This identifies the SCI node ID on the first Cluster node
     (identified by `NodeId1').

   *  `Host1SciId1'

     This table provides type and value information for the Host1SciId1
     SCI configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          0                 0 - 4G
     *Restart Type:* N                                     

     It is possible to set up SCI Transporters for failover between two
     SCI cards which then should use separate networks between the
     nodes. This identifies the node ID and the second SCI card to be
     used on the first node.

   *  `Host2SciId0'

     This table provides type and value information for the Host2SciId0
     SCI configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          [none]            0 - 4G
     *Restart Type:* N                                     

     This identifies the SCI node ID on the second Cluster node
     (identified by `NodeId2').

   *  `Host2SciId1'

     This table provides type and value information for the Host2SciId1
     SCI configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          0                 0 - 4G
     *Restart Type:* N                                     

     When using two SCI cards to provide failover, this parameter
     identifies the second SCI card to be used on the second node.

   *  `HostName1'

     This table provides type and value information for the HostName1
     SCI configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         name or IP        [none]            ...
                       address                             
     *Restart Type:* N                                     

     `HostName2'

     This table provides type and value information for the HostName1
     SCI configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         name or IP        [none]            ...
                       address                             
     *Restart Type:* N                                     

     The `HostName1' and `HostName2' parameters can be used to specify
     specific network interfaces to be used for a given SCI connection
     between two nodes. The values used for these parameters can be
     hostnames or IP addresses.

   *  `SharedBufferSize'

     This table provides type and value information for the
     SharedBufferSize SCI configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          10M               64K - 4G
     *Restart Type:* N                                     

     Each SCI transporter has a shared memory segment used for
     communication between the two nodes. Setting the size of this
     segment to the default value of 1MB should be sufficient for most
     applications. Using a smaller value can lead to problems when
     performing many parallel inserts; if the shared buffer is too
     small, this can also result in a crash of the *Note `ndbd':
     mysql-cluster-programs-ndbd. process.

   *  `SendLimit'

     This table provides type and value information for the SendLimit
     SCI configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         unsigned          8K                128 - 32K
     *Restart Type:* N                                     

     A small buffer in front of the SCI media stores messages before
     transmitting them over the SCI network. By default, this is set to
     8KB. Our benchmarks show that performance is best at 64KB but 16KB
     reaches within a few percent of this, and there was little if any
     advantage to increasing it beyond 8KB.

   *  `SendSignalId'

     This table provides type and value information for the
     SendSignalId SCI configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         boolean           true              true, false
     *Restart Type:* N                                     

     To trace a distributed message it is necessary to identify each
     message uniquely. When this parameter is set to `Y', message IDs
     are transported over the network. This feature is disabled by
     default in production builds, and enabled in `-debug' builds.

   *  `Checksum'

     This table provides type and value information for the Checksum
     SCI configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         boolean           false             true, false
     *Restart Type:* N                                     

     This parameter is a boolean value, and is disabled by default.
     When `Checksum' is enabled, checksums are calculated for all
     messages before they are placed in the send buffer. This feature
     prevents messages from being corrupted while waiting in the send
     buffer. It also serves as a check against data being corrupted
     during transport.

   *  `OverloadLimit'

     This table provides type and value information for the
     OverloadLimit SCI configuration parameter

     Effective Version Type/Units        Default           Range/Values
     NDB 7.2.0         bytes             0                 0 - 4G
     *Restart Type:* N                                     

     When more than this many unsent bytes are in the send buffer, the
     connection is considered overloaded. See *Note
     mysql-cluster-config-send-buffers::, for more information.


File: manual.info,  Node: mysql-cluster-config-send-buffers,  Prev: mysql-cluster-sci-definition,  Up: mysql-cluster-config-file

17.3.2.12 Configuring MySQL Cluster Send Buffer Parameters
..........................................................

Formerly, the NDB kernel employed a send buffer whose size was fixed at
2MB for each node in the cluster, this buffer being allocated when the
node started. Because the size of this buffer could not be changed
after the cluster was started, it was necessary to make it large enough
in advance to accommodate the maximum possible load on any transporter
socket. However, this was an inefficient use of memory, since much of
it often went unused, and could result in large amounts of resources
being wasted when scaling up to many API nodes.

This problem was eventually solved (in MySQL Cluster NDB 7.0) by
employing a unified send buffer whose memory is allocated dynamically
from a pool shared by all transporters. This means that the size of the
send buffer can be adjusted as necessary.  Configuration of the unified
send buffer can accomplished by setting the following parameters:

   * `TotalSendBufferMemory'

     This parameter can be set for all types of MySQL Cluster
     nodes--that is, it can be set in the `[ndbd]', `[mgm]', and
     `[api]' (or `[mysql]') sections of the `config.ini' file. It
     represents the total amount of memory (in bytes) to be allocated
     by each node for which it is set for use among all configured
     transporters. If set, its minimum is 256KB; the maximum is
     4294967039.

     To be backward-compatible with existing configurations, this
     parameter takes as its default value the sum of the maximum send
     buffer sizes of all configured transporters, plus an additional
     32KB (one page) per transporter. The maximum depends on the type
     of transporter, as shown in the following table:

     This table lists transporter types and the maximum send buffer
     size (bytes).

     Transporter          Maximum Send Buffer Size (bytes)
     TCP                  `SendBufferMemory' (default = 2M)
     SCI                  `SendLimit' (default = 8K) plus 16K
     SHM                  20K

     This enables existing configurations to function in close to the
     same way as they did with MySQL Cluster NDB 6.3 and earlier, with
     the same amount of memory and send buffer space available to each
     transporter. However, memory that is unused by one transporter is
     not available to other transporters.

   * `OverloadLimit'

     This parameter is used in the `config.ini' file `[tcp]' section,
     and denotes the amount of unsent data (in bytes) that must be
     present in the send buffer before the connection is considered
     overloaded.  When such an overload condition occurs, transactions
     that affect the overloaded connection fail with NDB API Error 1218
     (`Send Buffers overloaded in NDB kernel') until the overload
     status passes. The default value is 0, in which case the effective
     overload limit is calculated as `SendBufferMemory * 0.8' for a
     given connection. The maximum value for this parameter is 4G.

   * `SendBufferMemory'

     This value denotes a hard limit for the amount of memory that may
     be used by a single transporter out of the entire pool specified by
     `TotalSendBufferMemory'.  However, the sum of `SendBufferMemory'
     for all configured transporters may be greater than the
     `TotalSendBufferMemory' that is set for a given node. This is a
     way to save memory when many nodes are in use, as long as the
     maximum amount of memory is never required by all transporters at
     the same time.


File: manual.info,  Node: mysql-cluster-params-overview,  Next: mysql-cluster-options-variables,  Prev: mysql-cluster-config-file,  Up: mysql-cluster-configuration

17.3.3 Overview of MySQL Cluster Configuration Parameters
---------------------------------------------------------

* Menu:

* mysql-cluster-params-ndbd::    MySQL Cluster Data Node Configuration Parameters
* mysql-cluster-params-mgmd::    MySQL Cluster Management Node Configuration Parameters
* mysql-cluster-params-api::     MySQL Cluster SQL Node and API Node Configuration Parameters
* mysql-cluster-params-other::   Other MySQL Cluster Configuration Parameters

The next four sections provide summary tables of MySQL Cluster
configuration parameters used in the `config.ini' file to govern the
cluster's functioning. Each table lists the parameters for one of the
Cluster node process types (*Note `ndbd': mysql-cluster-programs-ndbd,
*Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd, and *Note `mysqld':
mysqld.), and includes the parameter's type as well as its default,
minimum, and maximum values as applicable.

These tables also indicate what type of restart is required (node
restart or system restart)--and whether the restart must be done with
`--initial'--to change the value of a given configuration parameter.

When performing a node restart or an initial node restart, all of the
cluster's data nodes must be restarted in turn (also referred to as a
_rolling restart_). It is possible to update cluster configuration
parameters marked as `node' online--that is, without shutting down the
cluster--in this fashion. An initial node restart requires restarting
each *Note `ndbd': mysql-cluster-programs-ndbd. process with the
`--initial' option.

A system restart requires a complete shutdown and restart of the entire
cluster. An initial system restart requires taking a backup of the
cluster, wiping the cluster file system after shutdown, and then
restoring from the backup following the restart.

In any cluster restart, all of the cluster's management servers must be
restarted for them to read the updated configuration parameter values.

*Important*:

Values for numeric cluster parameters can generally be increased
without any problems, although it is advisable to do so progressively,
making such adjustments in relatively small increments. Many of these
can be increased online, using a rolling restart.

However, decreasing the values of such parameters--whether this is done
using a node restart, node initial restart, or even a complete system
restart of the cluster--is not to be undertaken lightly; it is
recommended that you do so only after careful planning and testing.
This is especially true with regard to those parameters that relate to
memory usage and disk space, such as `MaxNoOfTables',
`MaxNoOfOrderedIndexes', and `MaxNoOfUniqueHashIndexes'.  In addition,
it is the generally the case that configuration parameters relating to
memory and disk usage can be raised using a simple node restart, but
they require an initial node restart to be lowered.

Because some of these parameters can be used for configuring more than
one type of cluster node, they may appear in more than one of the
tables.

*Note*:

`4294967039' often appears as a maximum value in these tables. This
value is defined in the *Note `NDBCLUSTER': mysql-cluster. sources as
`MAX_INT_RNIL' and is equal to `0xFFFFFEFF', or `2^32 - 2^8 - 1'.


File: manual.info,  Node: mysql-cluster-params-ndbd,  Next: mysql-cluster-params-mgmd,  Prev: mysql-cluster-params-overview,  Up: mysql-cluster-params-overview

17.3.3.1 MySQL Cluster Data Node Configuration Parameters
.........................................................

The summary table in this section provides information about parameters
used in the `[ndbd]' or `[ndbd default]' sections of a `config.ini'
file for configuring MySQL Cluster data nodes. For detailed
descriptions and other additional information about each of these
parameters, see *Note mysql-cluster-ndbd-definition::.

These parameters also apply to *Note `ndbmtd':
mysql-cluster-programs-ndbmtd, the multi-threaded version of *Note
`ndbd': mysql-cluster-programs-ndbd. For more information, see *Note
mysql-cluster-programs-ndbmtd::.

Restart types

Changes in MySQL Cluster configuration parameters do not take effect
until the cluster is restarted. The type of restart required to change
a given parameter is indicated in the summary table as follows:

   * `N'--Node restart: The parameter can be updated using a rolling
     restart (see *Note mysql-cluster-rolling-restart::).

   * `S'--System restart: The cluster must be shut down completely,
     then restarted, to effect a change in this parameter.

   * `I'--Initial restart: Data nodes must be restarted using the
     `--initial' option.

For more information about restart types, see *Note
mysql-cluster-params-overview::.

MySQL Cluster NDB 7.2 supports the addition of new data node groups
online, to a running cluster. For more information, see *Note
mysql-cluster-online-add-node::.

*Data Node Configuration Parameters*

This table describes MySQL Cluster Data Node configuration parameters

Parameter Name                              Type or      Restart   In
                                            Units        Type      Version
                                                                   ... (and
                                                                   later)
Default Value                                                      
Minimum/Maximum or Permitted Values                                
`Arbitration'                               enumeration  N         NDB 7.2.0
Default                                                            
Default, Disabled, WaitExternal                                    
`ArbitrationTimeout'                        milliseconds N         NDB 7.2.0
7500                                                               
10 / 4G                                                            
`BackupDataBufferSize'                      bytes        N         NDB 7.2.0
16M                                                                
0 / 4G                                                             
`BackupDataDir'                             path         IN        NDB 7.2.0
FileSystemPath                                                     
...                                                                
`BackupLogBufferSize'                       bytes        N         NDB 7.2.0
16M                                                                
0 / 4G                                                             
`BackupMaxWriteSize'                        bytes        N         NDB 7.2.1
1M                                                                 
2K / 4G                                                            
`BackupMemory'                              bytes        N         NDB 7.2.0
32M                                                                
0 / 4G                                                             
`BackupReportFrequency'                     seconds      N         NDB 7.2.0
0                                                                  
0 / 4G                                                             
`BackupWriteSize'                           bytes        N         NDB 7.2.0
256K                                                               
2K / 4G                                                            
`BatchSizePerLocalScan'                     integer      N         NDB 7.2.1
256                                                                
1 / 992                                                            
`BuildIndexThreads'                         numeric      S         NDB 7.2.0
0                                                                  
0 / 128                                                            
`CompressedBackup'                          boolean      N         NDB 7.2.0
false                                                              
true, false                                                        
`CompressedLCP'                             boolean      N         NDB 7.2.0
false                                                              
true, false                                                        
`ConnectCheckIntervalDelay'                 string       N         NDB 7.2.1
0                                                                  
0 / 4G                                                             
`CrashOnCorruptedTuple'                     boolean      S         NDB 7.2.1
true                                                               
true, false                                                        
`DataDir'                                   path         IN        NDB 7.2.0
.                                                                  
...                                                                
`DataMemory'                                bytes        N         NDB 7.2.0
80M                                                                
1M / 1024G                                                         
`DefaultHashMapSize'                        LDM threads  N         NDB
                                                                   7.2.11
3840                                                               
0 / 3840                                                           
`DictTrace'                                 bytes        N         NDB 7.2.0
undefined                                                          
0 / 100                                                            
`DiskCheckpointSpeed'                       bytes        N         NDB 7.2.0
10M                                                                
1M / 4G                                                            
`DiskCheckpointSpeedInRestart'              bytes        N         NDB 7.2.0
100M                                                               
1M / 4G                                                            
`DiskIOThreadPool'                          threads      N         NDB 7.2.0
2                                                                  
0 / 4G                                                             
`Diskless'                                  true|false   IS        NDB 7.2.0
                                            (1|0)                  
false                                                              
true, false                                                        
`DiskPageBufferMemory'                      bytes        N         NDB 7.2.0
64M                                                                
4M / 1T                                                            
`DiskSyncSize'                              bytes        N         NDB 7.2.0
4M                                                                 
32K / 4G                                                           
`ExecuteOnComputer'                         name         S         NDB 7.2.0
[none]                                                             
...                                                                
`ExtraSendBufferMemory'                     bytes        N         NDB 7.2.0
0                                                                  
0 / 32G                                                            
`FileSystemPath'                            path         IN        NDB 7.2.0
DataDir                                                            
...                                                                
`FileSystemPathDataFiles'                   filename     IN        NDB 7.2.0
[see text]                                                         
...                                                                
`FileSystemPathDD'                          filename     IN        NDB 7.2.0
FileSystemPath                                                     
...                                                                
`FileSystemPathUndoFiles'                   filename     IN        NDB 7.2.0
[see text]                                                         
...                                                                
`FragmentLogFileSize'                       bytes        IN        NDB 7.2.0
16M                                                                
4M / 1G                                                            
`HeartbeatIntervalDbApi'                    milliseconds N         NDB 7.2.0
1500                                                               
100 / 4G                                                           
`HeartbeatIntervalDbDb'                     milliseconds N         NDB 7.2.0
5000                                                               
10 / 4G                                                            
`HeartbeatOrder'                            numeric      S         NDB 7.2.0
0                                                                  
0 / 65535                                                          
`HostName'                                  name or IP   S         NDB 7.2.0
                                            address                
localhost                                                          
...                                                                
`Id'                                        unsigned     IS        NDB 7.2.0
[none]                                                             
1 / 48                                                             
`IndexMemory'                               bytes        N         NDB 7.2.0
18M                                                                
1M / 1T                                                            
`InitFragmentLogFiles'                      [see values] IN        NDB 7.2.0
SPARSE                                                             
SPARSE, FULL                                                       
`InitialLogFileGroup'                       string       S         NDB 7.2.0
[see text]                                                         
...                                                                
`InitialNoOfOpenFiles'                      files        N         NDB 7.2.0
27                                                                 
20 / 4G                                                            
`InitialTablespace'                         string       S         NDB 7.2.0
[see text]                                                         
...                                                                
`IOThreadPool'                              threads      N         NDB 7.2.0
8                                                                  
0 / 4G                                                             
`LockExecuteThreadToCPU'                    CPU ID       N         NDB 7.2.0
64K                                                                
0 / 64K                                                            
`LockMaintThreadsToCPU'                     CPU ID       N         NDB 7.2.0
[none]                                                             
0 / 64K                                                            
`LockPagesInMainMemory'                     numeric      N         NDB 7.2.0
0                                                                  
0 / 2                                                              
`LogLevelCheckpoint'                        log level    N         NDB 7.2.0
0                                                                  
0 / 15                                                             
`LogLevelCongestion'                        levelr       N         NDB 7.2.0
0                                                                  
0 / 15                                                             
`LogLevelConnection'                        integer      N         NDB 7.2.0
0                                                                  
0 / 15                                                             
`LogLevelError'                             integer      N         NDB 7.2.0
0                                                                  
0 / 15                                                             
`LogLevelInfo'                              integer      N         NDB 7.2.0
0                                                                  
0 / 15                                                             
`LogLevelNodeRestart'                       integer      N         NDB 7.2.0
0                                                                  
0 / 15                                                             
`LogLevelShutdown'                          integer      N         NDB 7.2.0
0                                                                  
0 / 15                                                             
`LogLevelStartup'                           integer      N         NDB 7.2.0
1                                                                  
0 / 15                                                             
`LogLevelStatistic'                         integer      N         NDB 7.2.0
0                                                                  
0 / 15                                                             
`LongMessageBuffer'                         bytes        N         NDB 7.2.0
4M                                                                 
512K / 4G                                                          
`MaxAllocate'                               unsigned     N         NDB 7.2.0
32M                                                                
1M / 1G                                                            
`MaxBufferedEpochs'                         epochs       N         NDB 7.2.0
100                                                                
0 / 100000                                                         
`MaxBufferedEpochBytes'                     bytes        N         NDB
                                                                   7.2.13
26214400                                                           
26214400 (0x01900000) / 4294967039                                 
(0xFFFFFEFF)                                                       
`MaxDMLOperationsPerTransaction'            operations   N         NDB 7.2.0
                                            (DML)                  
4294967295                                                         
32 / 4294967295                                                    
`MaxLCPStartDelay'                          seconds      N         NDB 7.2.0
0                                                                  
0 / 600                                                            
`MaxNoOfAttributes'                         integer      N         NDB 7.2.0
1000                                                               
32 / 4G                                                            
`MaxNoOfConcurrentIndexOperations'          integer      N         NDB 7.2.0
8K                                                                 
0 / 4G                                                             
`MaxNoOfConcurrentOperations'               integer      N         NDB 7.2.0
32K                                                                
32 / 4G                                                            
`MaxNoOfConcurrentScans'                    integer      N         NDB 7.2.0
256                                                                
2 / 500                                                            
`MaxNoOfConcurrentSubOperations'            unsigned     N         NDB 7.2.0
256                                                                
0 / 4G                                                             
`MaxNoOfConcurrentTransactions'             integer      S         NDB 7.2.0
4096                                                               
32 / 4G                                                            
`MaxNoOfFiredTriggers'                      integer      N         NDB 7.2.0
4000                                                               
0 / 4G                                                             
`MaxNoOfLocalOperations'                    integer      N         NDB 7.2.0
UNDEFINED                                                          
32 / 4G                                                            
`MaxNoOfLocalScans'                         integer      N         NDB 7.2.0
UNDEFINED                                                          
32 / 4G                                                            
`MaxNoOfOpenFiles'                          unsigned     N         NDB 7.2.0
0                                                                  
20 / 4G                                                            
`MaxNoOfOrderedIndexes'                     integer      N         NDB 7.2.0
128                                                                
0 / 4G                                                             
`MaxNoOfSavedMessages'                      integer      N         NDB 7.2.0
25                                                                 
0 / 4G                                                             
`MaxNoOfSubscribers'                        unsigned     N         NDB 7.2.0
0                                                                  
0 / 4G                                                             
`MaxNoOfSubscriptions'                      unsigned     N         NDB 7.2.0
0                                                                  
0 / 4G                                                             
`MaxNoOfTables'                             integer      N         NDB 7.2.0
128                                                                
8 / 20320                                                          
`MaxNoOfTriggers'                           integer      N         NDB 7.2.0
768                                                                
0 / 4G                                                             
`MaxNoOfUniqueHashIndexes'                  integer      N         NDB 7.2.0
64                                                                 
0 / 4G                                                             
`MaxParallelScansPerFragment'               bytes        N         NDB 7.2.0
256                                                                
1 / 1G                                                             
`MaxStartFailRetries'                       unsigned     N         NDB 7.2.0
3                                                                  
0 / 4G                                                             
`MemReportFrequency'                        unsigned     N         NDB 7.2.0
0                                                                  
0 / 4G                                                             
`MinFreePct'                                unsigned     N         NDB 7.2.3
5                                                                  
0 / 100                                                            
`NodeGroup'                                              IS        NDB 7.2.0
[none]                                                             
0 / 65536                                                          
`NodeId'                                    unsigned     IS        NDB 7.2.0
[none]                                                             
1 / 48                                                             
`NoOfFragmentLogFiles'                      integer      IN        NDB 7.2.0
16                                                                 
3 / 4G                                                             
`NoOfReplicas'                              integer      IS        NDB 7.2.0
2                                                                  
1 / 4                                                              
`Numa'                                      boolean      N         NDB 7.2.0
1                                                                  
...                                                                
`ODirect'                                   boolean      N         NDB 7.2.0
false                                                              
true, false                                                        
`RealtimeScheduler'                         boolean      N         NDB 7.2.0
false                                                              
true, false                                                        
`RedoBuffer'                                bytes        N         NDB 7.2.0
32M                                                                
1M / 4G                                                            
`RedoOverCommitCounter'                     numeric      N         NDB 7.2.0
3                                                                  
0 / 4G                                                             
`RedoOverCommitLimit'                       seconds      N         NDB 7.2.0
20                                                                 
0 / 4G                                                             
`ReservedSendBufferMemory'                  bytes        N         NDB 7.2.0
256K                                                               
0 / 4G                                                             
`RestartOnErrorInsert'                      error code   N         NDB 7.2.0
2                                                                  
0 / 4                                                              
`SchedulerExecutionTimer'                   µsec        N         NDB 7.2.0
50                                                                 
0 / 11000                                                          
`SchedulerSpinTimer'                        µsec        N         NDB 7.2.0
0                                                                  
0 / 500                                                            
`ServerPort'                                unsigned     N         NDB 7.2.0
[none]                                                             
1 / 64K                                                            
`SharedGlobalMemory'                        bytes        N         NDB 7.2.0
128M                                                               
0 / 64T                                                            
`StartFailRetryDelay'                       unsigned     N         NDB 7.2.0
0                                                                  
0 / 4G                                                             
`StartFailureTimeout'                       milliseconds N         NDB 7.2.0
0                                                                  
0 / 4G                                                             
`StartNoNodeGroupTimeout'                   milliseconds N         NDB 7.2.0
15000                                                              
0 / 4294967039                                                     
`StartPartialTimeout'                       milliseconds N         NDB 7.2.0
30000                                                              
0 / 4G                                                             
`StartPartitionedTimeout'                   milliseconds N         NDB 7.2.0
60000                                                              
0 / 4G                                                             
`StartupStatusReportFrequency'              seconds      N         NDB 7.2.0
[none]                                                             
...                                                                
`StopOnError'                               boolean      N         NDB 7.2.0
true                                                               
true, false                                                        
`StringMemory'                              % or bytes   S         NDB 7.2.1
25                                                                 
0 / 4G                                                             
`TcpBind_INADDR_ANY'                        boolean      N         NDB 7.2.0
false                                                              
true, false                                                        
`TimeBetweenEpochs'                         milliseconds N         NDB 7.2.0
100                                                                
0 / 32000                                                          
`TimeBetweenEpochsTimeout'                  milliseconds N         NDB 7.2.0
4000                                                               
0 / 256000                                                         
`TimeBetweenGlobalCheckpoints'              milliseconds N         NDB 7.2.0
2000                                                               
20 / 32000                                                         
`TimeBetweenInactiveTransactionAbortCheck'  milliseconds N         NDB 7.2.0
1000                                                               
1000 / 4G                                                          
`TimeBetweenLocalCheckpoints'               number of    N         NDB 7.2.0
                                            4-byte                 
                                            words, as a            
                                            base-2                 
                                            logarithm              
20                                                                 
0 / 31                                                             
`TimeBetweenWatchDogCheck'                  milliseconds N         NDB 7.2.0
6000                                                               
70 / 4G                                                            
`TimeBetweenWatchDogCheckInitial'           milliseconds N         NDB 7.2.0
6000                                                               
70 / 4G                                                            
`TotalSendBufferMemory'                     bytes        N         NDB 7.2.0
256K                                                               
0 / 4G                                                             
`TransactionBufferMemory'                   bytes        N         NDB 7.2.0
1M                                                                 
1K / 4G                                                            
`TransactionDeadlockDetectionTimeout'       milliseconds N         NDB 7.2.0
1200                                                               
50 / 4G                                                            
`TransactionInactiveTimeout'                milliseconds N         NDB 7.2.0
4G                                                                 
0 / 4G                                                             
`TwoPassInitialNodeRestartCopy'             boolean      N         NDB 7.2.0
false                                                              
true, false                                                        
`UndoDataBuffer'                            unsigned     N         NDB 7.2.0
16M                                                                
1M / 4G                                                            
`UndoIndexBuffer'                           unsigned     N         NDB 7.2.0
2M                                                                 
1M / 4G                                                            

*Multi-Threaded Data Node Configuration Parameters*

This table describes MySQL Cluster Multi-Threaded Data Node
configuration parameters

Parameter Name                              Type or      Restart   In
                                            Units        Type      Version
                                                                   ... (and
                                                                   later)
Default Value                                                      
Minimum/Maximum or Permitted Values                                
`MaxNoOfExecutionThreads'                   integer      N         NDB 7.2.5
2                                                                  
2 / 36                                                             
`NoOfFragmentLogParts'                      numeric      IN        NDB 7.2.5
4                                                                  
4, 8, 12, 16                                                       
`ThreadConfig'                              string       N         NDB 7.2.3
"                                                                  
...                                                                


File: manual.info,  Node: mysql-cluster-params-mgmd,  Next: mysql-cluster-params-api,  Prev: mysql-cluster-params-ndbd,  Up: mysql-cluster-params-overview

17.3.3.2 MySQL Cluster Management Node Configuration Parameters
...............................................................

The summary table in this section provides information about parameters
used in the `[ndb_mgmd]' or `[mgm]' sections of a `config.ini' file for
configuring MySQL Cluster management nodes. For detailed descriptions
and other additional information about each of these parameters, see
*Note mysql-cluster-mgm-definition::.

Restart types

Changes in MySQL Cluster configuration parameters do not take effect
until the cluster is restarted. The type of restart required to change
a given parameter is indicated in the summary table as follows:

   * `N'--Node restart: The parameter can be updated using a rolling
     restart (see *Note mysql-cluster-rolling-restart::).

   * `S'--System restart: The cluster must be shut down completely,
     then restarted, to effect a change in this parameter.

   * `I'--Initial restart: Data nodes must be restarted using the
     `--initial' option.

For more information about restart types, see *Note
mysql-cluster-params-overview::.

*Management Node Configuration Parameters*

This table describes MySQL Cluster Management Node configuration
parameters

Parameter Name                              Type or      Restart   In
                                            Units        Type      Version
                                                                   ... (and
                                                                   later)
Default Value                                                      
Minimum/Maximum or Permitted Values                                
`ArbitrationDelay'                          milliseconds N         NDB 7.2.0
0                                                                  
0 / 4G                                                             
`ArbitrationRank'                           0-2          N         NDB 7.2.0
1                                                                  
0 / 2                                                              
`DataDir'                                   path         N         NDB 7.2.0
.                                                                  
...                                                                
`ExecuteOnComputer'                         name         S         NDB 7.2.0
[none]                                                             
...                                                                
`ExtraSendBufferMemory'                     bytes        N         NDB 7.2.0
0                                                                  
0 / 32G                                                            
`HeartbeatThreadPriority'                   string       S         NDB 7.2.0
[none]                                                             
...                                                                
`HostName'                                  name or IP   S         NDB 7.2.0
                                            address                
[none]                                                             
...                                                                
`Id'                                        unsigned     IS        NDB 7.2.0
[none]                                                             
1 / 255                                                            
`LogDestination'                            {CONSOLE|SYSLOG|FILE}N         NDB 7.2.0
[see text]                                                         
...                                                                
`MaxNoOfSavedEvents'                        unsigned     N         NDB 7.2.0
100                                                                
0 / 4G                                                             
`NodeId'                                    unsigned     IS        NDB 7.2.0
[none]                                                             
1 / 255                                                            
`PortNumber'                                unsigned     N         NDB 7.2.0
1186                                                               
0 / 64K                                                            
`PortNumberStats'                           unsigned     N         NDB 7.2.0
[none]                                                             
0 / 64K                                                            
`TotalSendBufferMemory'                     bytes        N         NDB 7.2.0
256K                                                               
0 / 4G                                                             
`wan'                                       boolean      N         NDB 7.2.0
false                                                              
true, false                                                        

*Note*:

After making changes in a management node's configuration, it is
necessary to perform a rolling restart of the cluster for the new
configuration to take effect. See *Note mysql-cluster-mgm-definition::,
for more information.

To add new management servers to a running MySQL Cluster, it is also
necessary perform a rolling restart of all cluster nodes after
modifying any existing `config.ini' files. For more information about
issues arising when using multiple management nodes, see *Note
mysql-cluster-limitations-multiple-nodes::.


File: manual.info,  Node: mysql-cluster-params-api,  Next: mysql-cluster-params-other,  Prev: mysql-cluster-params-mgmd,  Up: mysql-cluster-params-overview

17.3.3.3 MySQL Cluster SQL Node and API Node Configuration Parameters
.....................................................................

The summary table in this section provides information about parameters
used in the `[mysqld]' and `[api]' sections of a `config.ini' file for
configuring MySQL Cluster SQL nodes and API nodes. For detailed
descriptions and other additional information about each of these
parameters, see *Note mysql-cluster-api-definition::.

*Note*:

For a discussion of MySQL server options for MySQL Cluster, see *Note
mysql-cluster-program-options-mysqld::; for information about MySQL
server system variables relating to MySQL Cluster, see *Note
mysql-cluster-system-variables::.

Restart types

Changes in MySQL Cluster configuration parameters do not take effect
until the cluster is restarted. The type of restart required to change
a given parameter is indicated in the summary table as follows:

   * `N'--Node restart: The parameter can be updated using a rolling
     restart (see *Note mysql-cluster-rolling-restart::).

   * `S'--System restart: The cluster must be shut down completely,
     then restarted, to effect a change in this parameter.

   * `I'--Initial restart: Data nodes must be restarted using the
     `--initial' option.

For more information about restart types, see *Note
mysql-cluster-params-overview::.

*SQL Node / API Node Configuration Parameters*

This table describes MySQL Cluster SQL Node / API Node configuration
parameters

Parameter Name                              Type or      Restart   In
                                            Units        Type      Version
                                                                   ... (and
                                                                   later)
Default Value                                                      
Minimum/Maximum or Permitted Values                                
`ArbitrationDelay'                          milliseconds N         NDB 7.2.0
0                                                                  
0 / 4G                                                             
`ArbitrationRank'                           0-2          N         NDB 7.2.0
0                                                                  
0 / 2                                                              
`AutoReconnect'                             boolean      N         NDB 7.2.0
false                                                              
true, false                                                        
`BatchByteSize'                             bytes        N         NDB 7.2.1
16K                                                                
1024 / 1M                                                          
`BatchSize'                                 records      N         NDB 7.2.1
256                                                                
1 / 992                                                            
`ConnectionMap'                             string       N         NDB 7.2.0
[none]                                                             
...                                                                
`DefaultHashMapSize'                        LDM threads  N         NDB
                                                                   7.2.11
3840                                                               
0 / 3840                                                           
`DefaultOperationRedoProblemAction'         enumeration  S         NDB
                                                                   7.2.10
QUEUE                                                              
ABORT, QUEUE                                                       
`ExecuteOnComputer'                         name         S         NDB 7.2.0
[none]                                                             
...                                                                
`ExtraSendBufferMemory'                     bytes        N         NDB 7.2.0
0                                                                  
0 / 32G                                                            
`HeartbeatThreadPriority'                   string       S         NDB 7.2.0
[none]                                                             
...                                                                
`HostName'                                  name or IP   S         NDB 7.2.0
                                            address                
[none]                                                             
...                                                                
`Id'                                        unsigned     IS        NDB 7.2.0
[none]                                                             
1 / 255                                                            
`MaxScanBatchSize'                          bytes        N         NDB 7.2.0
256K                                                               
32K / 16M                                                          
`NodeId'                                    unsigned     IS        NDB 7.2.0
[none]                                                             
1 / 255                                                            
`TotalSendBufferMemory'                     bytes        N         NDB 7.2.0
256K                                                               
0 / 4G                                                             
`wan'                                       boolean      N         NDB 7.2.0
false                                                              
true, false                                                        

*Note*:

To add new SQL or API nodes to the configuration of a running MySQL
Cluster, it is necessary to perform a rolling restart of all cluster
nodes after adding new `[mysqld]' or `[api]' sections to the
`config.ini' file (or files, if you are using more than one management
server). This must be done before the new SQL or API nodes can connect
to the cluster.

It is _not_ necessary to perform any restart of the cluster if new SQL
or API nodes can employ previously unused API slots in the cluster
configuration to connect to the cluster.


File: manual.info,  Node: mysql-cluster-params-other,  Prev: mysql-cluster-params-api,  Up: mysql-cluster-params-overview

17.3.3.4 Other MySQL Cluster Configuration Parameters
.....................................................

The summary tables in this section provide information about parameters
used in the `[computer]', `[tcp]', `[shm]', and `[sci]' sections of a
`config.ini' file for configuring MySQL Cluster management nodes. For
detailed descriptions and other additional information about individual
parameters, see *Note mysql-cluster-tcp-definition::, *Note
mysql-cluster-shm-definition::, or *Note
mysql-cluster-sci-definition::, as appropriate.

Restart types

Changes in MySQL Cluster configuration parameters do not take effect
until the cluster is restarted. The type of restart required to change
a given parameter is indicated in the summary tables as follows:

   * `N'--Node restart: The parameter can be updated using a rolling
     restart (see *Note mysql-cluster-rolling-restart::).

   * `S'--System restart: The cluster must be shut down completely,
     then restarted, to effect a change in this parameter.

   * `I'--Initial restart: Data nodes must be restarted using the
     `--initial' option.

For more information about restart types, see *Note
mysql-cluster-params-overview::.

*Computer Configuration Parameters*

This table describes MySQL Cluster Computer configuration parameters

Parameter Name                              Type or      Restart   In
                                            Units        Type      Version
                                                                   ... (and
                                                                   later)
Default Value                                                      
Minimum/Maximum or Permitted Values                                
`HostName'                                  name or IP   S         NDB 7.2.0
                                            address                
[none]                                                             
...                                                                
`Id'                                        string       IS        NDB 7.2.0
[none]                                                             
...                                                                

*TCP Configuration Parameters*

This table describes MySQL Cluster TCP configuration parameters

Parameter Name                              Type or      Restart   In
                                            Units        Type      Version
                                                                   ... (and
                                                                   later)
Default Value                                                      
Minimum/Maximum or Permitted Values                                
`Checksum'                                  boolean      N         NDB 7.2.0
false                                                              
true, false                                                        
`Group'                                     unsigned     N         NDB 7.2.0
55                                                                 
0 / 200                                                            
`NodeId1'                                   numeric      N         NDB 7.2.0
[none]                                                             
...                                                                
`NodeId2'                                   numeric      N         NDB 7.2.0
[none]                                                             
...                                                                
`NodeIdServer'                              numeric      N         NDB 7.2.0
[none]                                                             
...                                                                
`OverloadLimit'                             bytes        N         NDB 7.2.0
0                                                                  
0 / 4G                                                             
`PortNumber'                                unsigned     N         NDB 7.2.0
[none]                                                             
0 / 64K                                                            
`Proxy'                                     string       N         NDB 7.2.0
[none]                                                             
...                                                                
`ReceiveBufferMemory'                       bytes        N         NDB 7.2.0
2M                                                                 
16K / 4G                                                           
`SendBufferMemory'                          unsigned     N         NDB 7.2.0
2M                                                                 
256K / 4G                                                          
`SendSignalId'                              boolean      N         NDB 7.2.0
[see text]                                                         
true, false                                                        
`TCP_MAXSEG_SIZE'                           unsigned     N         NDB 7.2.0
0                                                                  
0 / 2G                                                             
`TCP_RCV_BUF_SIZE'                          unsigned     N         NDB 7.2.0
0                                                                  
0 / 2G                                                             
`TCP_SND_BUF_SIZE'                          unsigned     N         NDB 7.2.0
0                                                                  
0 / 2G                                                             
`TcpBind_INADDR_ANY'                        boolean      N         NDB 7.2.0
false                                                              
true, false                                                        

*Shared Memory Configuration Parameters*

This table describes MySQL Cluster Shared Memory configuration
parameters

Parameter Name                              Type or      Restart   In
                                            Units        Type      Version
                                                                   ... (and
                                                                   later)
Default Value                                                      
Minimum/Maximum or Permitted Values                                
`Checksum'                                  boolean      N         NDB 7.2.0
true                                                               
true, false                                                        
`Group'                                     unsigned     N         NDB 7.2.0
35                                                                 
0 / 200                                                            
`NodeId1'                                   numeric      N         NDB 7.2.0
[none]                                                             
...                                                                
`NodeId2'                                   numeric      N         NDB 7.2.0
[none]                                                             
...                                                                
`NodeIdServer'                              numeric      N         NDB 7.2.0
[none]                                                             
...                                                                
`OverloadLimit'                             bytes        N         NDB 7.2.0
0                                                                  
0 / 4G                                                             
`PortNumber'                                unsigned     N         NDB 7.2.0
[none]                                                             
0 / 64K                                                            
`SendSignalId'                              boolean      N         NDB 7.2.0
false                                                              
true, false                                                        
`ShmKey'                                    unsigned     N         NDB 7.2.0
[none]                                                             
0 / 4G                                                             
`ShmSize'                                   bytes        N         NDB 7.2.0
1M                                                                 
64K / 4G                                                           
`Signum'                                    unsigned     N         NDB 7.2.0
[none]                                                             
0 / 4G                                                             

*SCI Configuration Parameters*

This table describes MySQL Cluster SCI configuration parameters

Parameter Name                              Type or      Restart   In
                                            Units        Type      Version
                                                                   ... (and
                                                                   later)
Default Value                                                      
Minimum/Maximum or Permitted Values                                
`Checksum'                                  boolean      N         NDB 7.2.0
false                                                              
true, false                                                        
`Group'                                     unsigned     N         NDB 7.2.0
15                                                                 
0 / 200                                                            
`Host1SciId0'                               unsigned     N         NDB 7.2.0
[none]                                                             
0 / 4G                                                             
`Host1SciId1'                               unsigned     N         NDB 7.2.0
0                                                                  
0 / 4G                                                             
`Host2SciId0'                               unsigned     N         NDB 7.2.0
[none]                                                             
0 / 4G                                                             
`Host2SciId1'                               unsigned     N         NDB 7.2.0
0                                                                  
0 / 4G                                                             
`NodeId1'                                   numeric      N         NDB 7.2.0
[none]                                                             
...                                                                
`NodeId2'                                   numeric      N         NDB 7.2.0
[none]                                                             
...                                                                
`NodeIdServer'                              numeric      N         NDB 7.2.0
[none]                                                             
...                                                                
`OverloadLimit'                             bytes        N         NDB 7.2.0
0                                                                  
0 / 4G                                                             
`PortNumber'                                unsigned     N         NDB 7.2.0
[none]                                                             
0 / 64K                                                            
`SendLimit'                                 unsigned     N         NDB 7.2.0
8K                                                                 
128 / 32K                                                          
`SendSignalId'                              boolean      N         NDB 7.2.0
true                                                               
true, false                                                        
`SharedBufferSize'                          unsigned     N         NDB 7.2.0
10M                                                                
64K / 4G                                                           


File: manual.info,  Node: mysql-cluster-options-variables,  Next: mysql-cluster-interconnects,  Prev: mysql-cluster-params-overview,  Up: mysql-cluster-configuration

17.3.4 MySQL Server Options and Variables for MySQL Cluster
-----------------------------------------------------------

* Menu:

* mysql-cluster-option-tables::  MySQL Cluster `mysqld' Option and Variable Reference
* mysql-cluster-program-options-mysqld::  MySQL Server Options for MySQL Cluster
* mysql-cluster-system-variables::  MySQL Cluster System Variables
* mysql-cluster-status-variables::  MySQL Cluster Status Variables

This section provides information about MySQL server options, server
and status variables that are specific to MySQL Cluster.  For general
information on using these, and for other options and variables not
specific to MySQL Cluster, see *Note mysqld-server::.

For MySQL Cluster configuration parameters used in the cluster
configuration file (usually named `config.ini'), see *Note
mysql-cluster-configuration::.


File: manual.info,  Node: mysql-cluster-option-tables,  Next: mysql-cluster-program-options-mysqld,  Prev: mysql-cluster-options-variables,  Up: mysql-cluster-options-variables

17.3.4.1 MySQL Cluster `mysqld' Option and Variable Reference
.............................................................

The following table provides a list of the command-line options, server
and status variables applicable within `mysqld' when it is running as
an SQL node in a MySQL Cluster. For a table showing _all_ command-line
options, server and status variables available for use with *Note
`mysqld': mysqld, see *Note mysqld-option-tables::.

*MySQL Cluster `mysqld' Options and Variables: MySQL Cluster NDB 7.2*

This table describes MySQL Server options and variables relating to
MySQL Cluster

Option or Variable Name                         Command   System   Scope
                                                Line      Variable 
Option File                                     Status    Dynamic  
                                                Variable           
Notes                                                              
`Handler_discover'                              N         N        Both
N                                               Y         N        
The number of times that tables have been                          
discovered                                                         
`Ndb_api_wait_exec_complete_count_session'      N         N        Session
N                                               Y         N        
Number of times thread has been blocked while                      
waiting for execution of an operation to                           
complete in this client session.                                   
`Ndb_api_wait_exec_complete_count_slave'        N         N        Global
N                                               Y         N        
Number of times thread has been blocked while                      
waiting for execution of an operation to                           
complete by this slave.                                            
`Ndb_api_wait_exec_complete_count'              N         N        Global
N                                               Y         N        
Number of times thread has been blocked while                      
waiting for execution of an operation to                           
complete by this MySQL Server (SQL node).                          
`Ndb_api_wait_scan_result_count_session'        N         N        Session
N                                               Y         N        
Number of times thread has been blocked while                      
waiting for a scan-based signal in this client                     
session.                                                           
`Ndb_api_wait_scan_result_count_slave'          N         N        Global
N                                               Y         N        
Number of times thread has been blocked while                      
waiting for a scan-based signal by this slave.                     
`Ndb_api_wait_scan_result_count'                N         N        Global
N                                               Y         N        
Number of times thread has been blocked while                      
waiting for a scan-based signal by this MySQL                      
Server (SQL node).                                                 
`Ndb_api_wait_meta_request_count_session'       N         N        Session
N                                               Y         N        
Number of times thread has been blocked                            
waiting for a metadata-based signal in this                        
client session.                                                    
`Ndb_api_wait_meta_request_count_slave'         N         N        Global
N                                               Y         N        
Number of times thread has been blocked                            
waiting for a metadata-based signal by this                        
slave.                                                             
`Ndb_api_wait_meta_request_count'               N         N        Global
N                                               Y         N        
Number of times thread has been blocked                            
waiting for a metadata-based signal by this                        
MySQL Server (SQL node).                                           
`Ndb_api_wait_nanos_count_session'              N         N        Session
N                                               Y         N        
Total time (in nanoseconds) spent waiting for                      
some type of signal from the data nodes in                         
this client session.                                               
`Ndb_api_wait_nanos_count_slave'                N         N        Global
N                                               Y         N        
Total time (in nanoseconds) spent waiting for                      
some type of signal from the data nodes by                         
this slave.                                                        
`Ndb_api_wait_nanos_count'                      N         N        Global
N                                               Y         N        
Total time (in nanoseconds) spent waiting for                      
some type of signal from the data nodes by                         
this MySQL Server (SQL node).                                      
`Ndb_api_bytes_sent_count_session'              N         N        Session
N                                               Y         N        
Amount of data (in bytes) sent to the data                         
nodes in this client session.                                      
`Ndb_api_bytes_sent_count_slave'                N         N        Global
N                                               Y         N        
Amount of data (in bytes) sent to the data                         
nodes by this slave.                                               
`Ndb_api_bytes_sent_count'                      N         N        Global
N                                               Y         N        
Amount of data (in bytes) sent to the data                         
nodes by this MySQL Server (SQL node).                             
`Ndb_api_bytes_received_count_session'          N         N        Session
N                                               Y         N        
Amount of data (in bytes) received from the                        
data nodes in this client session.                                 
`Ndb_api_bytes_received_count_slave'            N         N        Global
N                                               Y         N        
Amount of data (in bytes) received from the                        
data nodes by this slave.                                          
`Ndb_api_bytes_received_count'                  N         N        Global
N                                               Y         N        
Amount of data (in bytes) received from the                        
data nodes by this MySQL Server (SQL node).                        
`Ndb_api_trans_start_count_session'             N         N        Session
N                                               Y         N        
Number of transactions started in this client                      
session.                                                           
`Ndb_api_trans_start_count_slave'               N         N        Global
N                                               Y         N        
Number of transactions started by this slave.                      
`Ndb_api_trans_start_count'                     N         N        Global
N                                               Y         N        
Number of transactions started by this MySQL                       
Server (SQL node).                                                 
`Ndb_api_trans_commit_count_session'            N         N        Session
N                                               Y         N        
Number of transactions committed in this                           
client session.                                                    
`Ndb_api_trans_commit_count_slave'              N         N        Global
N                                               Y         N        
Number of transactions committed by this slave.                    
`Ndb_api_trans_commit_count'                    N         N        Global
N                                               Y         N        
Number of transactions committed by this MySQL                     
Server (SQL node).                                                 
`Ndb_api_trans_abort_count_session'             N         N        Session
N                                               Y         N        
Number of transactions aborted in this client                      
session.                                                           
`Ndb_api_trans_abort_count_slave'               N         N        Global
N                                               Y         N        
Number of transactions aborted by this slave.                      
`Ndb_api_trans_abort_count'                     N         N        Global
N                                               Y         N        
Number of transactions aborted by this MySQL                       
Server (SQL node).                                                 
`Ndb_api_trans_close_count_session'             N         N        Session
N                                               Y         N        
Number of transactions aborted (may be greater                     
than the sum of TransCommitCount and                               
TransAbortCount) in this client session.                           
`Ndb_api_trans_close_count_slave'               N         N        Global
N                                               Y         N        
Number of transactions aborted (may be greater                     
than the sum of TransCommitCount and                               
TransAbortCount) by this slave.                                    
`Ndb_api_trans_close_count'                     N         N        Global
N                                               Y         N        
Number of transactions aborted (may be greater                     
than the sum of TransCommitCount and                               
TransAbortCount) by this MySQL Server (SQL                         
node).                                                             
`Ndb_api_pk_op_count_session'                   N         N        Session
N                                               Y         N        
Number of operations based on or using primary                     
keys in this client session.                                       
`Ndb_api_pk_op_count_slave'                     N         N        Global
N                                               Y         N        
Number of operations based on or using primary                     
keys by this slave.                                                
`Ndb_api_pk_op_count'                           N         N        Global
N                                               Y         N        
Number of operations based on or using primary                     
keys by this MySQL Server (SQL node).                              
`Ndb_api_uk_op_count_session'                   N         N        Session
N                                               Y         N        
Number of operations based on or using unique                      
keys in this client session.                                       
`Ndb_api_uk_op_count_slave'                     N         N        Global
N                                               Y         N        
Number of operations based on or using unique                      
keys by this slave.                                                
`Ndb_api_uk_op_count'                           N         N        Global
N                                               Y         N        
Number of operations based on or using unique                      
keys by this MySQL Server (SQL node).                              
`Ndb_api_table_scan_count_session'              N         N        Session
N                                               Y         N        
Number of table scans that have been started,                      
including scans of internal tables, in this                        
client session.                                                    
`Ndb_api_table_scan_count_slave'                N         N        Global
N                                               Y         N        
Number of table scans that have been started,                      
including scans of internal tables, by this                        
slave.                                                             
`Ndb_api_table_scan_count'                      N         N        Global
N                                               Y         N        
Number of table scans that have been started,                      
including scans of internal tables, by this                        
MySQL Server (SQL node).                                           
`Ndb_api_range_scan_count_session'              N         N        Session
N                                               Y         N        
Number of range scans that have been started                       
in this client session.                                            
`Ndb_api_range_scan_count_slave'                N         N        Global
N                                               Y         N        
Number of range scans that have been started                       
by this slave.                                                     
`Ndb_api_range_scan_count'                      N         N        Global
N                                               Y         N        
Number of range scans that have been started                       
by this MySQL Server (SQL node).                                   
`Ndb_api_pruned_scan_count_session'             N         N        Session
N                                               Y         N        
Number of scans that have been pruned to a                         
single partition in this client session.                           
`Ndb_api_pruned_scan_count_slave'               N         N        Global
N                                               Y         N        
Number of scans that have been pruned to a                         
single partition by this slave.                                    
`Ndb_api_pruned_scan_count'                     N         N        Global
N                                               Y         N        
Number of scans that have been pruned to a                         
single partition by this MySQL Server (SQL                         
node).                                                             
`Ndb_api_scan_batch_count_session'              N         N        Session
N                                               Y         N        
Number of batches of rows received in this                         
client session.                                                    
`Ndb_api_scan_batch_count_slave'                N         N        Global
N                                               Y         N        
Number of batches of rows received by this                         
slave.                                                             
`Ndb_api_scan_batch_count'                      N         N        Global
N                                               Y         N        
Number of batches of rows received by this                         
MySQL Server (SQL node).                                           
`Ndb_api_read_row_count_session'                N         N        Session
N                                               Y         N        
Total number of rows that have been read in                        
this client session.                                               
`Ndb_api_read_row_count_slave'                  N         N        Global
N                                               Y         N        
Total number of rows that have been read by                        
this slave.                                                        
`Ndb_api_read_row_count'                        N         N        Global
N                                               Y         N        
Total number of rows that have been read by                        
this MySQL Server (SQL node).                                      
`Ndb_api_trans_local_read_row_count_session'    N         N        Session
N                                               Y         N        
Total number of rows that have been read in                        
this client session.                                               
`Ndb_api_trans_local_read_row_count_slave'      N         N        Global
N                                               Y         N        
Total number of rows that have been read by                        
this slave.                                                        
`Ndb_api_trans_local_read_row_count'            N         N        Global
N                                               Y         N        
Total number of rows that have been read by                        
this MySQL Server (SQL node).                                      
`Ndb_api_event_data_count_injector'             N         N        Global
N                                               Y         N        
Number of row change events received by the                        
NDB binlog injector thread.                                        
`Ndb_api_event_data_count'                      N         N        Global
N                                               Y         N        
Number of row change events received by this                       
MySQL Server (SQL node).                                           
`Ndb_api_event_nondata_count_injector'          N         N        Global
N                                               Y         N        
Number of events received, other than row                          
change events, by the NDB binlog injector                          
thread.                                                            
`Ndb_api_event_nondata_count'                   N         N        Global
N                                               Y         N        
Number of events received, other than row                          
change events, by this MySQL Server (SQL node).                    
`Ndb_api_event_bytes_count_injector'            N         N        Global
N                                               Y         N        
Number of bytes of events received by the NDB                      
binlog injector thread.                                            
`Ndb_api_event_bytes_count'                     N         N        Global
N                                               Y         N        
Number of bytes of events received by this                         
MySQL Server (SQL node).                                           
`Ndb_number_of_data_nodes'                      N         N        Global
N                                               Y         N        
If the server is part of a MySQL Cluster, the                      
value of this variable is the number of data                       
nodes in the cluster                                               
`Ndb_conflict_fn_max'                           N         N        Global
N                                               Y         N        
If the server is part of a MySQL Cluster                           
involved in cluster replication, the value of                      
this variable indicates the number of times                        
that conflict resolution based on "greater                         
timestamp wins" has been applied                                   
`Ndb_conflict_fn_old'                           N         N        Global
N                                               Y         N        
If the server is part of a MySQL Cluster                           
involved in cluster replication, the value of                      
this variable indicates the number of times                        
that "same timestamp wins" conflict resolution                     
has been applied                                                   
`Ndb_conflict_fn_epoch'                         N         N        Global
N                                               Y         N        
Number of rows that have been found in                             
conflict by the NDB$EPOCH() conflict detection                     
function                                                           
`Ndb_conflict_fn_epoch_trans'                   N         N        Global
N                                               Y         N        
Number of rows that have been found in                             
conflict by the NDB$EPOCH_TRANS() conflict                         
detection function                                                 
`Ndb_conflict_trans_row_conflict_count'         N         N        Global
N                                               Y         N        
Number of rows found to be in conflict by a                        
transactional conflict function                                    
`Ndb_conflict_trans_row_reject_count'           N         N        Global
N                                               Y         N        
Total number of rows realigned after being                         
found in conflict by a transactional conflict                      
function. Includes                                                 
Ndb_conflict_trans_row_conflict_count and any                      
rows included in or dependent on conflicting                       
transactions.                                                      
`Ndb_conflict_trans_reject_count'               N         N        Global
N                                               Y         N        
Number of transactions rejected after being                        
found in conflict by a transactional conflict                      
function.                                                          
`Ndb_conflict_trans_detect_iter_count'          N         N        Global
N                                               Y         N        
The number of internal iterations required to                      
commit an epoch transaction. Should be                             
(slightly) greater than or equal to                                
Ndb_conflict_trans_conflict_commit_count.                          
`Ndb_conflict_trans_conflict_commit_count'      N         N        Global
N                                               Y         N        
The number of epoch transactions committed                         
after requiring transactional conflict                             
handling.                                                          
`ndb_optimization_delay'                        N         Y        Global
N                                               N         Y        
Sets the number of milliseconds to wait                            
between processing sets of rows by OPTIMIZE                        
TABLE on NDB tables.                                               
`ndb_table_temporary'                           N         Y        Session
N                                               N         Y        
NDB tables are not persistent on disk: no                          
schema files are created and the tables are                        
not logged                                                         
`ndb_table_no_logging'                          N         Y        Session
N                                               N         Y        
NDB tables created when this setting is                            
enabled are not checkpointed to disk (although                     
table schema files are created). The setting                       
in effect when the table is created with or                        
altered to use NDBCLUSTER persists for the                         
lifetime of the table.                                             
`ndb_autoincrement_prefetch_sz'                 Y         Y        Both
Y                                               N         Y        
NDB auto-increment prefetch size                                   
`ndb-batch-size'                                Y         Y        Global
Y                                               N         N        
The size (in bytes) to use for NDB transaction                     
batches                                                            
`ndb-blob-read-batch-bytes'                     Y         Y        Both
Y                                               N         Y        
Specifies the size in bytes that large BLOB                        
reads should be batched into. 0 = no limit.                        
`ndb-blob-write-batch-bytes'                    Y         Y        Both
Y                                               N         Y        
Specifies the size in bytes that large BLOB                        
writes should be batched into. 0 = no limit.                       
`ndb_cache_check_time'                          Y         Y        Global
Y                                               N         Y        
The number of milliseconds between checks of                       
cluster SQL nodes made by the MySQL query cache                    
`ndb-cluster-connection-pool'                   Y         Y        Global
Y                                               Y         N        
The number of connections to the cluster used                      
by MySQL                                                           
`ndb_join_pushdown'                             N         Y        Global
N                                               N         N        
Enables pushing down of joins to data nodes                        
`Ndb_execute_count'                             N         N        Global
N                                               Y         N        
Provides the number of round trips to the NDB                      
kernel made by operations                                          
`Ndb_scan_count'                                N         N        Global
N                                               Y         N        
The total number of scans executed by NDB                          
since the cluster was last started                                 
`Ndb_pruned_scan_count'                         N         N        Global
N                                               Y         N        
The number of scans executed by NDB since the                      
cluster was last started where partition                           
pruning could be used                                              
`ndb-connectstring'                             Y         N        
Y                                               N         N        
Point to the management server that                                
distributes the cluster configuration                              
`ndb_extra_logging'                             Y         Y        Global
Y                                               N         Y        
Controls logging of MySQL Cluster schema,                          
connection, and data distribution events in                        
the MySQL error log                                                
`ndb_force_send'                                Y         Y        Both
Y                                               N         Y        
Forces sending of buffers to NDB immediately,                      
without waiting for other threads                                  
`ndb_use_exact_count'                           N         Y        Both
N                                               N         Y        
Use exact row count when planning queries                          
`ndb-log-apply-status'                          Y         Y        Global
Y                                               N         N        
Cause a MySQL server acting as a slave to log                      
mysql.ndb_apply_status updates received from                       
its immediate master in its own binary log,                        
using its own server ID.  Effective only if                        
the server is started with the -ndbcluster                         
option.                                                            
`ndb_log_bin'                                   Y         Y        Both
N                                               N         Y        
Write updates to NDB tables in the binary log.                     
Effective only if binary logging is enabled                        
with -log-bin.                                                     
`ndb_log_binlog_index'                          Y         Y        Global
N                                               N         Y        
Insert mapping between epochs and binary log                       
positions into the ndb_binlog_index table.                         
Defaults to ON. Effective only if binary                           
logging is enabled on the server.                                  
`ndb-log-orig'                                  Y         Y        Global
Y                                               N         N        
Log originating server id and epoch in                             
mysql.ndb_binlog_index table.                                      
`ndb-log-transaction-id'                        Y         Y        Global
Y                                               N         N        
Write NDB transaction IDs in the binary log.                       
Requires -log-bin-v1-events=OFF.                                   
`ndb_log_transaction_id'                        N         Y        Global
N                                               N         N        
Whether NDB transaction IDs are written into                       
the binary log. (Read-only.)                                       
`ndb_log_updated_only'                          Y         Y        Global
Y                                               N         Y        
Log complete rows (ON) or updates only (OFF)                       
`ndb-log-update-as-write'                       Y         Y        Global
Y                                               N         Y        
Toggles logging of updates on the master                           
between updates (OFF) and writes (ON)                              
`ndb-log-empty-epochs'                          Y         Y        Global
Y                                               N         Y        
When enabled, causes epochs in which there                         
were no changes to be written to the                               
ndb_apply_status and ndb_binlog_index tables,                      
even when -log-slave-updates is enabled.                           
`ndb_log_empty_epochs'                          Y         Y        Global
Y                                               N         Y        
When enabled, epochs in which there were no                        
changes are written to the ndb_apply_status                        
and ndb_binlog_index tables, even when                             
log_slave_updates is enabled.                                      
`ndb-transid-mysql-connection-map'              Y         N        
N                                               N         N        
Enable or disable the                                              
ndb_transid_mysql_connection_map plugin; that                      
is, enable or disable the INFORMATION_SCHEMA                       
table having that name.                                            
`Ndb_pushed_reads'                              N         N        Global
N                                               Y         N        
Number of reads executed on the data nodes by                      
pushed-down joins                                                  
`Ndb_pushed_queries_defined'                    N         N        Global
N                                               Y         N        
Number of joins that API nodes have attempted                      
to push down to the data nodes                                     
`Ndb_pushed_queries_dropped'                    N         N        Global
N                                               Y         N        
Number of joins that API nodes have tried to                       
push down, but failed                                              
`Ndb_pushed_queries_executed'                   N         N        Global
N                                               Y         N        
Number of joins successfully pushed down and                       
executed on the data nodes                                         
`ndb-nodeid'                                    Y         N        Global
Y                                               Y         N        
MySQL Cluster node ID for this MySQL server                        
`ndb-mgmd-host'                                 Y         N        
Y                                               N         N        
Set the host (and port, if desired) for                            
connecting to the management server                                
`ndb-wait-connected'                            Y         Y        Global
Y                                               N         N        
Time (in seconds) for the MySQL server to wait                     
for connection to cluster management and data                      
nodes before accepting MySQL client                                
connections.                                                       
`ndb-wait-setup'                                Y         Y        Global
Y                                               N         N        
Time (in seconds) for the MySQL server to wait                     
for NDB engine setup to complete.                                  
`ndbcluster'                                    Y         N        
Y                                               N         N        
Enable NDB Cluster (if this version of MySQL                       
supports it)                                                       
`ndbinfo_database'                              N         Y        Global
N                                               N         N        
The name used for the NDB information                              
database; read only.                                               
`ndbinfo_max_bytes'                             Y         Y        Both
N                                               N         Y        
Used for debugging only.                                           
`ndbinfo_max_rows'                              Y         Y        Both
N                                               N         Y        
Used for debugging only.                                           
`ndbinfo_show_hidden'                           Y         Y        Both
N                                               N         Y        
Whether to show ndbinfo internal base tables                       
in the mysql client. The default is OFF.                           
`ndbinfo_table_prefix'                          Y         Y        Both
N                                               N         Y        
The prefix to use for naming ndbinfo internal                      
base tables.  Defaults to 'ndb$'.                                  
`ndbinfo_version'                               N         Y        Global
N                                               N         N        
The version of the ndbinfo engine; read only.                      
`server-id-bits'                                Y         Y        Global
Y                                               N         N        
Sets the number of least significant bits in                       
the server_id actually used for identifying                        
the server, permitting NDB API applications to                     
store application data in the most significant                     
bits. server_id must be less than 2 to the                         
power of this value.                                               
`transaction_allow_batching'                    N         Y        Session
N                                               N         Y        
Allows batching of statements within a                             
transaction.  Disable AUTOCOMMIT to use.                           
`have_ndbcluster'                               N         Y        Global
N                                               N         N        
Whether mysqld supports NDB Cluster tables                         
(set by -ndbcluster option)                                        
`ndb-deferred-constraints'                      Y         Y        Both
Y                                               N         Y        
Specifies that constraint checks on unique                         
indexes (where these are supported) should be                      
deferred until commit time.  Not normally                          
needed or used; for testing purposes only.                         
`ndb_deferred_constraints'                      Y         Y        Both
Y                                               N         Y        
Specifies that constraint checks should be                         
deferred (where these are supported). Not                          
normally needed or used; for testing purposes                      
only.                                                              
`ndb-distribution'                              Y         Y        Both
Y                                               N         Y        
Default distribution for new tables in                             
NDBCLUSTER (KEYHASH or LINHASH, default is                         
KEYHASH)                                                           
`ndb_distribution'                              Y         Y        Both
Y                                               N         Y        
Default distribution for new tables in                             
NDBCLUSTER (KEYHASH or LINHASH, default is                         
KEYHASH)                                                           
`ndb_optimized_node_selection'                  Y         N        
Y                                               N         N        
Determines how an SQL node chooses a cluster                       
data node to use as transaction coordinator                        
`ndb_report_thresh_binlog_epoch_slip'           Y         N        
Y                                               N         N        
This is a threshold on the number of epochs to                     
be behind before reporting binlog status                           
`ndb_report_thresh_binlog_mem_usage'            Y         N        
Y                                               N         N        
This is a threshold on the percentage of free                      
memory remaining before reporting binlog status                    
`ndb_use_transactions'                          Y         Y        Both
Y                                               N         Y        
Forces NDB to use a count of records during                        
SELECT COUNT(*) query planning to speed up                         
this type of query                                                 
`Ndb_cluster_node_id'                           N         N        Both
N                                               Y         N        
If the server is acting as a MySQL Cluster                         
node, then the value of this variable its node                     
ID in the cluster                                                  
`Ndb_config_from_host'                          N         N        Both
N                                               Y         N        
The host name or IP address of the Cluster                         
management server. Formerly Ndb_connected_host                     
`Ndb_config_from_port'                          N         N        Both
N                                               Y         N        
The port for connecting to the Cluster                             
management server.  Formerly Ndb_connected_port                    
`Com_show_ndb_status'                           N         N        Both
N                                               Y         N        
Count of SHOW NDB STATUS statements                                


File: manual.info,  Node: mysql-cluster-program-options-mysqld,  Next: mysql-cluster-system-variables,  Prev: mysql-cluster-option-tables,  Up: mysql-cluster-options-variables

17.3.4.2 MySQL Server Options for MySQL Cluster
...............................................

This section provides descriptions of *Note `mysqld': mysqld.  server
options relating to MySQL Cluster. For information about *Note
`mysqld': mysqld. options not specific to MySQL Cluster, and for
general information about the use of options with *Note `mysqld':
mysqld, see *Note server-options::.

For information about command-line options used with other MySQL
Cluster processes (*Note `ndbd': mysql-cluster-programs-ndbd, *Note
`ndb_mgmd': mysql-cluster-programs-ndb-mgmd, and *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm.), see *Note
mysql-cluster-program-options-common::. For information about
command-line options used with *Note `NDB': mysql-cluster. utility
programs (such as *Note `ndb_desc': mysql-cluster-programs-ndb-desc,
*Note `ndb_size.pl': mysql-cluster-programs-ndb-size-pl, and *Note
`ndb_show_tables': mysql-cluster-programs-ndb-show-tables.), see *Note
mysql-cluster-programs::.

   *  `--ndb-batch-size=#'

     Options for ndb-batch-size

     *Command-Line        `--ndb-batch-size'        
     Format*                              
     *Option-File Format* `ndb-batch-size'        
     *System Variable     `ndb_batch_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `32768'         
     *Range*              `0 ..           
                          31536000'        

     This sets the size in bytes that is used for NDB transaction
     batches.

   *  `--ndb-cluster-connection-pool=#'

     Options for ndb-cluster-connection-pool

     *Command-Line        `--ndb-cluster-connection-pool'        
     Format*                              
     *Option-File Format* `ndb-cluster-connection-pool'        
     *Status Variable     `Ndb_cluster_connection_pool'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
     *System Variable     `ndb_cluster_connection_pool'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1'             
     *Range*              `1 ..           
                          63'             

     By setting this option to a value greater than 1 (the default), a
     *Note `mysqld': mysqld. process can use multiple connections to
     the cluster, effectively mimicking several SQL nodes. Each
     connection requires its own `[api]' or `[mysqld]' section in the
     cluster configuration (`config.ini') file, and counts against the
     maximum number of API connections supported by the cluster.

     Suppose that you have 2 cluster host computers, each running an
     SQL node whose *Note `mysqld': mysqld. process was started with
     `--ndb-cluster-connection-pool=4'; this means that the cluster
     must have 8 API slots available for these connections (instead of
     2). All of these connections are set up when the SQL node connects
     to the cluster, and are allocated to threads in a round-robin
     fashion.

     This option is useful only when running *Note `mysqld': mysqld. on
     host machines having multiple CPUs, multiple cores, or both. For
     best results, the value should be smaller than the total number of
     cores available on the host machine. Setting it to a value greater
     than this is likely to degrade performance severely.

     *Important*:

     Because each SQL node using connection pooling occupies multiple
     API node slots--each slot having its own node ID in the
     cluster--you must _not_ use a node ID as part of the cluster
     connection string when starting any *Note `mysqld': mysqld.
     process that employs connection pooling.

     Setting a node ID in the connection string when using the
     `--ndb-cluster-connection-pool' option causes node ID allocation
     errors when the SQL node attempts to connect to the cluster.

     *Note*:

     In some older releases of MySQL Cluster prior to MySQL Cluster NDB
     7.2, there was also a separate status variable corresponding to
     this option; however, the status variable was removed as redundant
     as of these versions. (Bug #60119)

   *  `--ndb-blob-read-batch-bytes=BYTES'

     Options for ndb-blob-read-batch-bytes

     *Command-Line        `--ndb-blob-read-batch-bytes'        
     Format*                              
     *Option-File Format* `ndb-blob-read-batch-bytes'        
     *System Variable     `ndb_blob_read_batch_bytes'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `65535'         
     *Range*              `0 ..           
                          4294967295'        

     This option can be used to set the size (in bytes) for batching of
     *Note `BLOB': blob. data reads in MySQL Cluster applications. When
     this batch size is exceeded by the amount of *Note `BLOB': blob.
     data to be read within the current transaction, any pending *Note
     `BLOB': blob. read operations are immediately executed.

     The maximum value for this option is 4294967295; the default is
     65535. Setting it to 0 has the effect of disabling *Note `BLOB':
     blob. read batching.

     *Note*:

     In NDB API applications, you can control *Note `BLOB': blob. write
     batching with the `setMaxPendingBlobReadBytes()'
     (http://dev.mysql.com/doc/ndbapi/en/ndb-ndbtransaction-methods.html#ndb-ndbtransaction-setmaxpendingblobreadbytes)
     and `getMaxPendingBlobReadBytes()'
     (http://dev.mysql.com/doc/ndbapi/en/ndb-ndbtransaction-methods.html#ndb-ndbtransaction-getmaxpendingblobreadbytes)
     methods.

   *  `--ndb-blob-write-batch-bytes=BYTES'

     Options for ndb-blob-write-batch-bytes

     *Command-Line        `--ndb-blob-write-batch-bytes'        
     Format*                              
     *Option-File Format* `ndb-blob-write-batch-bytes'        
     *System Variable     `ndb_blob_write_batch_bytes'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `65535'         
     *Range*              `0 ..           
                          4294967295'        

     This option can be used to set the size (in bytes) for batching of
     *Note `BLOB': blob. data writes in MySQL Cluster applications.
     When this batch size is exceeded by the amount of *Note `BLOB':
     blob. data to be written within the current transaction, any
     pending *Note `BLOB': blob. write operations are immediately
     executed.

     The maximum value for this option is 4294967295; the default is
     65535. Setting it to 0 has the effect of disabling *Note `BLOB':
     blob. write batching.

     *Note*:

     In NDB API applications, you can control *Note `BLOB': blob. write
     batching with the `setMaxPendingBlobWriteBytes()'
     (http://dev.mysql.com/doc/ndbapi/en/ndb-ndbtransaction-methods.html#ndb-ndbtransaction-setmaxpendingblobwritebytes)
     and `getMaxPendingBlobWriteBytes()'
     (http://dev.mysql.com/doc/ndbapi/en/ndb-ndbtransaction-methods.html#ndb-ndbtransaction-getmaxpendingblobwritebytes)
     methods.

   *  `--ndb-connectstring=CONNECT_STRING'

     Options for ndb-connectstring

     *Command-Line        `--ndb-connectstring'        
     Format*                              
     *Option-File Format* `ndb-connectstring'        
                          *Permitted        
                          Values*         
     *Type*               `string'        

     When using the *Note `NDBCLUSTER': mysql-cluster.  storage engine,
     this option specifies the management server that distributes
     cluster configuration data. See *Note
     mysql-cluster-connection-strings::, for syntax.

   *  `--ndb-deferred-constraints=[0|1]'

     Options for ndb-deferred-constraints

     *Command-Line        `--ndb-deferred-constraints'        
     Format*                              
     *Option-File Format* `ndb-deferred-constraints'        
     *System Variable     `ndb_deferred_constraints'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `integer'        
     *Default*            `0'             
     *Range*              `0 ..           
                          1'              

     Controls whether or not constraint checks on unique indexes are
     deferred until commit time, where such checks are supported. `0'
     is the default.

     This option is not normally needed for operation of MySQL Cluster
     or MySQL Cluster Replication, and is intended primarily for use in
     testing.

   *  `--ndb-distribution=[KEYHASH|LINHASH]'

     Options for ndb-distribution

     *Command-Line        `--ndb-distribution={KEYHASH|LINHASH}'        
     Format*                              
     *Option-File Format* `ndb-distribution'        
     *System Variable     `ndb_distribution'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `KEYHASH'        
     *Valid Values*       `LINHASH'        
     `KEYHASH'                            

     Controls the default distribution method for *Note `NDB':
     mysql-cluster. tables. Can be set to either of `KEYHASH' (key
     hashing) or `LINHASH' (linear hashing).  `KEYHASH' is the default.

   *  `--ndb-mgmd-host=HOST[:PORT]'

     Options for ndb-mgmd-host

     *Command-Line        `--ndb-mgmd-host=host[:port]'        
     Format*                              
     *Option-File Format* `ndb-mgmd-host'        
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `localhost:1186'        

     Can be used to set the host and port number of a single management
     server for the program to connect to. If the program requires node
     IDs or references to multiple management servers (or both) in its
     connection information, use the `--ndb-connectstring' option
     instead.

   *  `--ndbcluster'

     Options for ndbcluster

     *Command-Line        `--ndbcluster'        
     Format*                              
     *Option-File Format* `ndbcluster'        
     *Disabled by*        `skip-ndbcluster'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     The *Note `NDBCLUSTER': mysql-cluster. storage engine is necessary
     for using MySQL Cluster. If a *Note `mysqld': mysqld. binary
     includes support for the *Note `NDBCLUSTER': mysql-cluster.
     storage engine, the engine is disabled by default. Use the
     `--ndbcluster' option to enable it. Use `--skip-ndbcluster' to
     explicitly disable the engine.

   *  `--ndb-log-apply-status'

     Options for ndb-log-apply-status

     *Command-Line        `--ndb-log-apply-status'        
     Format*                              
     *Option-File Format* `ndb-log-apply-status'        
     *System Variable     `ndb_log_apply_status'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Causes a slave *Note `mysqld': mysqld. to log any updates received
     from its immediate master to the `mysql.ndb_apply_status' table in
     its own binary log using its own server ID rather than the server
     ID of the master. In a circular or chain replication setting, this
     allows such updates to propagate to the `mysql.ndb_apply_status'
     tables of any MySQL servers configured as slaves of the current
     *Note `mysqld': mysqld.

     In a chain replication setup, using this option allows downstream
     (slave) clusters to be aware of their positions relative to all of
     their upstream contributors (masters).

     In a circular replication setup, this option causes changes to
     `ndb_apply_status' tables to complete the entire circuit,
     eventually propagating back to the originating MySQL Cluster. This
     also allows a cluster acting as a master to see when its changes
     (epochs) have been applied to the other clusters in the circle.

     This option has no effect unless the MySQL server is started with
     the `--ndbcluster' option.

   *  `--ndb-log-orig'

     Options for ndb-log-orig

     *Command-Line        `--ndb-log-orig'        
     Format*                              
     *Option-File Format* `ndb-log-orig'        
     *System Variable     `ndb_log_orig'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Log the originating server ID and epoch in the `ndb_binlog_index'
     table.

     Note that this makes it possible for a given epoch to have
     multiple rows in `ndb_binlog_index', one for each originating
     epoch.

     For more information, see *Note mysql-cluster-replication-schema::.

   *  `--ndb-log-transaction-id'

     Options for ndb-log-transaction-id

     *Introduced*         5.5.15-ndb-7.2.1        
     *Command-Line        `--ndb-log-transaction-id[={0|1}]'        
     Format*                              
     *Option-File Format* `ndb-log-transaction-id'        
     *System Variable     `ndb_log_transaction_id'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Causes a slave *Note `mysqld': mysqld. to write the NDB
     transaction ID in each row of the binary log. Such logging
     requires the use of the Version 2 event format for the binary log;
     thus, `--log-bin-use-v1-row-events' must be set to `FALSE' in
     order to use this option.

     This option is available beginning with MySQL Cluster NDB 7.2.1
     (and is not supported in mainline MySQL Server 5.5). It is
     required to enable MySQL Cluster Replication conflict detection
     and resolution using the `NDB$EPOCH_TRANS()' function introduced in
     the same MySQL Cluster release.

     The default value is `FALSE'.

     For more information, see *Note
     mysql-cluster-replication-conflict-resolution::.

   *  `--ndb-nodeid=#'

     Options for ndb-nodeid

     *Command-Line        `--ndb-nodeid=#'        
     Format*                              
     *Option-File Format* `ndb-nodeid'        
     *Status Variable     `Ndb_cluster_node_id'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Range*              `1 ..           
                          255'            

     Set this MySQL server's node ID in a MySQL Cluster.

     The `--ndb-nodeid' option overrides any node ID set with
     `--ndb-connectstring', regardless of the order in which the two
     options are used.

     In addition, if `--ndb-nodeid' is used, then either a matching
     node ID must be found in a `[mysqld]' or `[api]' section of
     `config.ini', or there must be an `open' `[mysqld]' or `[api]'
     section in the file (that is, a section without a `NodeId' or `Id'
     parameter specified). This is also true if the node ID is
     specified as part of the connection string.

     Regardless of how the node ID is determined, its is shown as the
     value of the global status variable `Ndb_cluster_node_id' in the
     output of *Note `SHOW STATUS': show-status, and as
     `cluster_node_id' in the `connection' row of the output of *Note
     `SHOW ENGINE NDBCLUSTER STATUS': show-engine.

     For more information about node IDs for MySQL Cluster SQL nodes,
     see *Note mysql-cluster-api-definition::.

   *  `--ndb-log-empty-epochs=[0|1]'

     Options for ndb-log-empty-epochs

     *Command-Line        `--ndb-log-empty-epochs'        
     Format*                              
     *Option-File Format* `ndb-log-empty-epochs'        
     *System Variable     `ndb_log_empty_epochs'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Causes epochs during which there were no changes to be written to
     the `ndb_apply_status' and `ndb_binlog_index' tables, even when
     `--log-slave-updates' is enabled.

     By default this option is disabled. Disabling
     `--ndb-log-empty-epochs' causes epoch transactions with no changes
     not to be written to the binary log, although a row is still
     written even for an empty epoch in `ndb_binlog_index'.

     Because `--ndb-log-empty-epochs=1' causes the size of
     `ndb_binlog_index' table to increase independently of the size of
     the binary log, users should be prepared to manage the growth of
     this table, even if they expect the cluster to be idle a large
     part of the time.

   *  `--server-id-bits=#'

     Options for server-id-bits

     *Command-Line        `--server-id-bits=#'        
     Format*                              
     *Option-File Format* `server-id-bits'        
     *System Variable     `server_id_bits'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `32'            
     *Range*              `7 ..           
                          32'             

     This option indicates the number of least significant bits within
     the 32-bit `server_id' which actually identify the server.
     Indicating that the server is actually identified by fewer than 32
     bits makes it possible for some of the remaining bits to be used
     for other purposes, such as storing user data generated by
     applications using the NDB API's Event API within the `AnyValue'
     of an `OperationOptions' structure (MySQL Cluster uses the
     `AnyValue' to store the server ID).

     When extracting the effective server ID from `server_id' for
     purposes such as detection of replication loops, the server
     ignores the remaining bits. The `--server-id-bits' option is used
     to mask out any irrelevant bits of `server_id' in the IO and SQL
     threads when deciding whether an event should be ignored based on
     the server ID.

     This data can be read from the binary log by *Note `mysqlbinlog':
     mysqlbinlog, provided that it is run with its own
     `--server-id-bits' option set to 32 (the default).

     The value of `server_id' must be less than 2 ^ `server_id_bits';
     otherwise, *Note `mysqld': mysqld. refuses to start.

     This system variable is supported only by MySQL Cluster. It is not
     supported in the standard MySQL 5.5 Server.

   *  `--skip-ndbcluster'

     Options for skip-ndbcluster

     *Command-Line        `--skip-ndbcluster'        
     Format*                              
     *Option-File Format* `skip-ndbcluster'        

     Disable the *Note `NDBCLUSTER': mysql-cluster. storage engine.
     This is the default for binaries that were built with *Note
     `NDBCLUSTER': mysql-cluster. storage engine support; the server
     allocates memory and other resources for this storage engine only
     if the `--ndbcluster' option is given explicitly. See *Note
     mysql-cluster-quick::, for an example.

   *  `ndb-transid-mysql-connection-map=STATE'

     Options for ndb-transid-mysql-connection-map

     *Introduced*         5.5.16-ndb-7.2.2        
     *Command-Line        `--ndb-transid-mysql-connection-map[=state]'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `ON'            
     *Valid Values*       `OFF'           
     `FORCE'                              

     Enables or disables the plugin that handles the *Note
     `ndb_transid_mysql_connection_map':
     ndb-transid-mysql-connection-map-table.  table in the
     `INFORMATION_SCHEMA' database.  Takes one of the values `ON',
     `OFF', or `FORCE'.  `ON' (the default) enables the plugin.  `OFF'
     disables the plugin, which makes `ndb_transid_mysql_connection_map'
     inaccessible. `FORCE' keeps the MySQL Server from starting if the
     plugin fails to load and start.

     You can see whether the *Note `ndb_transid_mysql_connection_map':
     ndb-transid-mysql-connection-map-table.  table plugin is running
     by checking the output of *Note `SHOW PLUGINS': show-plugins.

     This option was added in MySQL Cluster NDB 7.2.2.

   *  `--ndb-wait-connected=SECONDS'

     Options for ndb-wait-connected

     *Command-Line        `--ndb-wait-connected=#'        
     Format*                              
     *Option-File Format* `ndb-wait-connected'        
     *System Variable     `ndb_wait_connected'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          31536000'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          31536000'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `30'            
     *Range*              `0 ..           
                          31536000'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `30'            
     *Range*              `0 ..           
                          31536000'        

     This option sets the period of time that the MySQL server waits
     for connections to MySQL Cluster management and data nodes to be
     established before accepting MySQL client connections. The time is
     specified in seconds. The default value is `30'.

   *  `--ndb-wait-setup=SECONDS'

     Options for ndb-wait-setup

     *Command-Line        `--ndb-wait-setup=#'        
     Format*                              
     *Option-File Format* `ndb-wait-setup'        
     *System Variable     `ndb_wait_setup'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `15'            
     *Range*              `0 ..           
                          31536000'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `15'            
     *Range*              `0 ..           
                          31536000'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `30'            
     *Range*              `0 ..           
                          31536000'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `30'            
     *Range*              `0 ..           
                          31536000'        

     This variable shows the period of time that the MySQL server waits
     for the *Note `NDB': mysql-cluster. storage engine to complete
     setup before timing out and treating *Note `NDB': mysql-cluster.
     as unavailable. The time is specified in seconds. The default
     value is `30'.

   *  `--ndb_optimization_delay=MILLISECONDS'

     Options for ndb_optimization_delay

     *System Variable     `ndb_optimization_delay'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `10'            
     *Range*              `0 ..           
                          100000'         

     Set the number of milliseconds to wait between sets of rows by
     *Note `OPTIMIZE TABLE': optimize-table. statements on *Note `NDB':
     mysql-cluster. tables. The default is 15.


File: manual.info,  Node: mysql-cluster-system-variables,  Next: mysql-cluster-status-variables,  Prev: mysql-cluster-program-options-mysqld,  Up: mysql-cluster-options-variables

17.3.4.3 MySQL Cluster System Variables
.......................................

This section provides detailed information about MySQL server system
variables that are specific to MySQL Cluster and the *Note `NDB':
mysql-cluster. storage engine. For system variables not specific to
MySQL Cluster, see *Note server-system-variables::. For general
information on using system variables, see *Note
using-system-variables::.

   *  `have_ndbcluster'

     Options for have_ndbcluster

     *System Variable     `have_ndbcluster'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        

     `YES' if *Note `mysqld': mysqld. supports *Note `NDBCLUSTER':
     mysql-cluster. tables.  `DISABLED' if `--skip-ndbcluster' is used.

     This variable is deprecated and is removed in MySQL 5.6. Use *Note
     `SHOW ENGINES': show-engines. instead.

   *  `multi_range_count'

     Options for multi_range_count

     *Command-Line        `--multi_range_count=#'        
     Format*                              
     *Option-File Format* `multi_range_count'        
     *System Variable     `multi_range_count'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `256'           
     *Range*              `1 ..           
                          4294967295'        

     The maximum number of ranges to send to a table handler at once
     during range selects. The default value is 256. Sending multiple
     ranges to a handler at once can improve the performance of certain
     selects dramatically. This is especially true for the *Note
     `NDBCLUSTER': mysql-cluster. table handler, which needs to send
     the range requests to all nodes. Sending a batch of those requests
     at once reduces communication costs significantly.

     This variable is deprecated in MySQL 5.1, and is no longer
     supported in MySQL 5.5, in which arbitrarily long lists of ranges
     can be processed.

   *  `ndb_autoincrement_prefetch_sz'

     Options for ndb_autoincrement_prefetch_sz

     *Command-Line        `--ndb_autoincrement_prefetch_sz'        
     Format*                              
     *Option-File Format* `ndb_autoincrement_prefetch_sz'        
     *Option Sets         Yes,            
     Variable*            `ndb_autoincrement_prefetch_sz'        
     *Variable Name*      `ndb_autoincrement_prefetch_sz'        
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values          
                          *               
     *Type*               `numeric'        
     *Default*            `1'             
     *Range*              `1 ..           
                          65536'          

     Determines the probability of gaps in an autoincremented column.
     Set it to `1' to minimize this.  Setting it to a high value for
     optimization makes inserts faster, but decreases the likelihood
     that consecutive autoincrement numbers will be used in a batch of
     inserts.  The mininum and default value is 1. The maximum value for
     `ndb_autoincrement_prefetch_sz' is 65536.

     This variable affects only the number of `AUTO_INCREMENT' IDs that
     are fetched between statements; within a given statement, at least
     32 IDs are obtained at a time. The default value for
     `ndb_autoincrement_prefetch_sz' is `1', to increase the speed of
     statements inserting single rows.

     *Important*:

     This variable does not affect inserts performed using *Note
     `INSERT ... SELECT': insert-select.

   *  `ndb_cache_check_time'

     Options for ndb_cache_check_time

     *Command-Line        `--ndb_cache_check_time'        
     Format*                              
     *Option-File Format* `ndb_cache_check_time'        
     *System Variable     `ndb_cache_check_time'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             

     The number of milliseconds that elapse between checks of MySQL
     Cluster SQL nodes by the MySQL query cache. Setting this to 0 (the
     default and minimum value) means that the query cache checks for
     validation on every query.

     The recommended maximum value for this variable is 1000, which
     means that the check is performed once per second. A larger value
     means that the check is performed and possibly invalidated due to
     updates on different SQL nodes less often. It is generally not
     desirable to set this to a value greater than 2000.

   *  `ndb_deferred_constraints'

     Options for ndb_deferred_constraints

     *Command-Line        `--ndb-deferred-constraints'        
     Format*                              
     *Option-File Format* `ndb_deferred_constraints'        
     *System Variable     `ndb_deferred_constraints'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `integer'        
     *Default*            `0'             
     *Range*              `0 ..           
                          1'              

     Controls whether or not constraint checks are deferred, where
     these are supported. `0' is the default.

     This variable is not normally needed for operation of MySQL
     Cluster or MySQL Cluster Replication, and is intended primarily
     for use in testing.

   *  `ndb_distribution'

     Options for ndb_distribution

     *Command-Line        `--ndb-distribution={KEYHASH|LINHASH}'        
     Format*                              
     *Option-File Format* `ndb_distribution'        
     *System Variable     `ndb_distribution={KEYHASH|LINHASH}'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `KEYHASH'        
     *Valid Values*       `LINHASH'        
     `KEYHASH'                            

     Controls the default distribution method for *Note `NDB':
     mysql-cluster. tables. Can be set to either of `KEYHASH' (key
     hashing) or `LINHASH' (linear hashing).  `KEYHASH' is the default.

   *  `ndb_extra_logging'

     Options for ndb_extra_logging

     *Command-Line        `ndb_extra_logging=#'        
     Format*                              
     *Option-File Format* `ndb_extra_logging'        
     *System Variable     `ndb_extra_logging'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             

     This variable can be used to enable recording in the MySQL error
     log of information specific to the *Note `NDB': mysql-cluster.
     storage engine. It is normally of interest only when debugging
     *Note `NDB': mysql-cluster. storage engine code.

     The default value is 0, which means that the only *Note `NDB':
     mysql-cluster.-specific information written to the MySQL error log
     relates to transaction handling. If the value is greater than 0
     but less than 10, *Note `NDB': mysql-cluster. table schema and
     connection events are also logged, as well as whether or not
     conflict resolution is in use, and other *Note `NDB':
     mysql-cluster. errors and information. If the value is set to 10
     or more, information about *Note `NDB': mysql-cluster. internals,
     such as the progress of data distribution among cluster nodes, is
     also written to the MySQL error log.

   *  `ndb_force_send'

     Options for ndb_force_send

     *Command-Line        `--ndb-force-send'        
     Format*                              
     *Option-File Format* `ndb_force_send'        
     *System Variable     `ndb_force_send'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `TRUE'          

     Forces sending of buffers to *Note `NDB': mysql-cluster.
     immediately, without waiting for other threads. Defaults to `ON'.

   *  `ndb_index_stat_cache_entries'

     Options for ndb_index_stat_cache_entries

     *Command-Line        `--ndb_index_stat_cache_entries'        
     Format*                              
     *Option-File Format* `ndb_index_stat_cache_entries'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `32'            
     *Range*              `0 ..           
                          4294967295'        

     Sets the granularity of the statistics by determining the number
     of starting and ending keys to store in the statistics memory
     cache. Zero means no caching takes place; in this case, the data
     nodes are always queried directly.  Default value: `32'.

     *Note*:

     If `ndb_index_stat_enable' is `OFF', then setting this variable has
     no effect.

   *  `ndb_index_stat_enable'

     Options for ndb_index_stat_enable

     *Command-Line        `--ndb_index_stat_enable'        
     Format*                              
     *Option-File Format* `ndb_index_stat_enable'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            

     Use *Note `NDB': mysql-cluster. index statistics in query
     optimization. Defaults to `ON'.

   *  `ndb_index_stat_update_freq'

     Options for ndb_index_stat_update_freq

     *Command-Line        `--ndb_index_stat_update_freq'        
     Format*                              
     *Option-File Format* `ndb_index_stat_update_freq'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `20'            
     *Range*              `0 ..           
                          4294967295'        

     How often to query data nodes instead of the statistics cache. For
     example, a value of `20' (the default) means to direct every 20^th
     query to the data nodes.

     *Note*:

     If `ndb_index_stat_cache_entries' is `0', then setting this
     variable has no effect; in this case, every query is sent directly
     to the data nodes.

   *  `ndb_join_pushdown'

     Options for ndb_join_pushdown

     *System Variable     `ndb_join_pushdown'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `TRUE'          

     Added in MySQL Cluster NDB 7.2.0, this variable controls whether
     joins on *Note `NDB': mysql-cluster. tables are pushed down to the
     NDB kernel (data nodes). Previously, a join was handled using
     multiple accesses of *Note `NDB': mysql-cluster. by the SQL node;
     however, when `ndb_join_pushdown' is enabled, a pushable join is
     sent in its entirety to the data nodes, where it can be
     distributed among the data nodes and executed in parallel on
     multiple copies of the data, with a single, merged result being
     returned to *Note `mysqld': mysqld. This can reduce greatly the
     number of round trips between an SQL node and the data nodes
     required to handle such a join.

     By default, `ndb_join_pushdown' is enabled.

     In order for a join to be pushable, it must meet the following
     conditions:

       1. Only columns can be compared, and all columns to be joined
          must use _exactly_ the same data type.

          This means that expressions such as `t1.a = t2.a + CONSTANT'
          cannot be pushed down, and that (for example) a join on an
          *Note `INT': integer-types. column and a *Note `BIGINT':
          integer-types. column also cannot be pushed down.

       2. Queries referencing *Note `BLOB': blob.  or *Note `TEXT':
          blob. columns are not supported.

       3. Explicit locking is not supported; however, the *Note `NDB':
          mysql-cluster. storage engine's characteristic implicit
          row-based locking is enforced.

          This means that a join using `FOR UPDATE' cannot be pushed
          down.

       4. In order for a join to be pushed down, child tables in the
          join must be accessed using one of the `ref', `eq_ref', or
          `const' access methods, or some combination of these methods.

          Outer joined child tables can only be pushed using `eq_ref'.

          If the root of the pushed join is an `eq_ref' or `const',
          only child tables joined by `eq_ref' can be appended. (A
          table joined by `ref' is likely to become the root of another
          pushed join.)

          If the query optimizer decides on `Using join cache' for a
          candidate child table, that table cannot be pushed as a
          child. However, it may be the root of another set of pushed
          tables.

       5. Joins referencing tables explicitly partitioned by `[LINEAR]
          HASH', `LIST', or `RANGE' currently cannot be pushed down.

     You can see whether a given join can be pushed down by checking it
     with *Note `EXPLAIN': explain.; when the join can be pushed down,
     you can see references to the `pushed join' in the `Extra' column
     of the output, as shown in this example:

          mysql> EXPLAIN
              ->     SELECT e.first_name, e.last_name, t.title, d.dept_name
              ->         FROM employees e
              ->         JOIN dept_emp de ON e.emp_no=de.emp_no
              ->         JOIN departments d ON d.dept_no=de.dept_no
              ->         JOIN titles t ON e.emp_no=t.emp_no\G
          *************************** 1. row ***************************
                     id: 1
            select_type: SIMPLE
                  table: d
                   type: ALL
          possible_keys: PRIMARY
                    key: NULL
                key_len: NULL
                    ref: NULL
                   rows: 9
                  Extra: Parent of 4 pushed join@1
          *************************** 2. row ***************************
                     id: 1
            select_type: SIMPLE
                  table: de
                   type: ref
          possible_keys: PRIMARY,emp_no,dept_no
                    key: dept_no
                key_len: 4
                    ref: employees.d.dept_no
                   rows: 5305
                  Extra: Child of 'd' in pushed join@1
          *************************** 3. row ***************************
                     id: 1
            select_type: SIMPLE
                  table: e
                   type: eq_ref
          possible_keys: PRIMARY
                    key: PRIMARY
                key_len: 4
                    ref: employees.de.emp_no
                   rows: 1
                  Extra: Child of 'de' in pushed join@1
          *************************** 4. row ***************************
                     id: 1
            select_type: SIMPLE
                  table: t
                   type: ref
          possible_keys: PRIMARY,emp_no
                    key: emp_no
                key_len: 4
                    ref: employees.de.emp_no
                   rows: 19
                  Extra: Child of 'e' in pushed join@1
          4 rows in set (0.00 sec)

     *Note*:

     If inner joined child tables are joined by `ref', _and_ the result
     is ordered or grouped by a sorted index, this index cannot provide
     sorted rows, which forces writing to a sorted tempfile.

     Two additional sources of information about pushed join
     performance are available:

       1. The status variables `Ndb_pushed_queries_defined',
          `Ndb_pushed_queries_dropped', `Ndb_pushed_queries_executed',
          and `Ndb_pushed_reads' (all introduced in MySQL Cluster NDB
          7.2.0).

       2. The counters in the *Note `ndbinfo.counters':
          mysql-cluster-ndbinfo-counters. table that belong to the
          `DBSPJ' kernel block. (These counters and the `DBSPJ' block
          were also introduced in MySQL Cluster NDB 7.2.0).  See *Note
          mysql-cluster-ndbinfo-counters::, for information about these
          counters. See also The `DBSPJ' Block
          (http://dev.mysql.com/doc/ndbapi/en/ndb-internals-kernel-blocks-dbspj.html),
          in the `MySQL Cluster API Developer Guide'.

   *  `ndb_log_apply_status'

     Options for ndb-log-apply-status

     *Command-Line        `--ndb-log-apply-status'        
     Format*                              
     *Option-File Format* `ndb-log-apply-status'        
     *System Variable     `ndb_log_apply_status'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     A read-only variable which shows whether the server was started
     with the `--ndb-log-apply-status' option.

   *  `ndb_log_bin'

     Options for ndb_log_bin

     *Command-Line        `--ndb-log-bin={1|0}'        
     Format*                              
     *System Variable     `ndb_log_bin'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            

     Causes updates to `NDB' tables to be written to the binary log.
     Setting this variable has no effect if binary logging is not
     already enabled for the server using `log_bin'.  `ndb_log_bin'
     defaults to 1 (ON); normally, there is never any need to change
     this value in a production environment.

   *  `ndb_log_binlog_index'

     Options for ndb_log_binlog_index

     *Command-Line        `--ndb-log-binlog-index={1|0}'        
     Format*                              
     *System Variable     `ndb_log_binlog_index'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            

     Causes a mapping of epochs to positions in the binary log to be
     inserted into the `ndb_binlog_index' table. Setting this variable
     has no effect if binary logging is not already enabled for the
     server using `log_bin'. (In addition, `ndb_log_bin' must not be
     disabled.) `ndb_log_binlog_index' defaults to `1' (`ON'); normally,
     there is never any need to change this value in a production
     environment.

   *  `ndb_log_orig'

     Options for ndb-log-orig

     *Command-Line        `--ndb-log-orig'        
     Format*                              
     *Option-File Format* `ndb-log-orig'        
     *System Variable     `ndb_log_orig'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Shows whether the originating server ID and epoch are logged in
     the `ndb_binlog_index' table. Set using the `--ndb-log-orig' server
     option.

   *  `ndb_log_transaction_id'

     Options for ndb_log_transaction_id

     *Introduced*         5.5.15-ndb-7.2.1        
     *System Variable     `ndb_log_transaction_id'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     This read-only, Boolean system variable shows whether a slave
     *Note `mysqld': mysqld. writes NDB transaction IDs in the binary
     log (required to use `active-active' MySQL Cluster Replication with
     `NDB$EPOCH_TRANS()' conflict detection). To change the setting,
     use the `--ndb-log-transaction-id' option.

     `ndb_log_transaction_id' is available in MySQL Cluster NDB 7.2.1
     and later. It is not supported in mainline MySQL Server 5.5.

     For more information, see *Note
     mysql-cluster-replication-conflict-resolution::.

   *  `ndb_optimized_node_selection'

     Options for ndb_optimized_node_selection

     *Command-Line        `--ndb-optimized-node-selection=#'        
     Format*                              
     *Option-File Format* `ndb_optimized_node_selection'        
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `3'             
     *Range*              `0 ..           
                          3'              

     There are two forms of optimized node selection, described here:

       1. The SQL node uses _promixity_ to determine the transaction
          coordinator; that is, the `closest' data node to the SQL node
          is chosen as the transaction coordinator. For this purpose, a
          data node having a shared memory connection with the SQL node
          is considered to be `closest' to the SQL node; the next
          closest (in order of decreasing proximity) are: TCP
          connection to `localhost'; SCI connection; TCP connection
          from a host other than `localhost'.

       2. The SQL thread uses _distribution awareness_ to select the
          data node. That is, the data node housing the cluster
          partition accessed by the first statement of a given
          transaction is used as the transaction coordinator for the
          entire transaction.  (This is effective only if the first
          statement of the transaction accesses no more than one cluster
          partition.)

     This option takes one of the integer values `0', `1', `2', or `3'.
     `3' is the default. These values affect node selection as follows:

        * `0': Node selection is not optimized.  Each data node is
          employed as the transaction coordinator 8 times before the
          SQL thread proceeds to the next data node.

        * `1': Proximity to the SQL node is used to determine the
          transaction coordinator.

        * `2': Distribution awareness is used to select the transaction
          coordinator. However, if the first statement of the
          transaction accesses more than one cluster partition, the SQL
          node reverts to the round-robin behavior seen when this
          option is set to `0'.

        * `3': If distribution awareness can be employed to determine
          the transaction coordinator, then it is used; otherwise
          proximity is used to select the transaction coordinator.
          (This is the default behavior.)

   *  `ndb_report_thresh_binlog_epoch_slip'

     Options for ndb_report_thresh_binlog_epoch_slip

     *Command-Line        `--ndb_report_thresh_binlog_epoch_slip'        
     Format*                              
     *Option-File Format* `ndb_report_thresh_binlog_epoch_slip'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `3'             
     *Range*              `0 ..           
                          256'            

     This is a threshold on the number of epochs to be behind before
     reporting binary log status. For example, a value of `3' (the
     default) means that if the difference between which epoch has been
     received from the storage nodes and which epoch has been applied
     to the binary log is 3 or more, a status message will be sent to
     the cluster log.

   *  `ndb_report_thresh_binlog_mem_usage'

     Options for ndb_report_thresh_binlog_mem_usage

     *Command-Line        `--ndb_report_thresh_binlog_mem_usage'        
     Format*                              
     *Option-File Format* `ndb_report_thresh_binlog_mem_usage'        
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `10'            
     *Range*              `0 ..           
                          10'             

     This is a threshold on the percentage of free memory remaining
     before reporting binary log status. For example, a value of `10'
     (the default) means that if the amount of available memory for
     receiving binary log data from the data nodes falls below 10%, a
     status message will be sent to the cluster log.

   *  `slave_allow_batching'

     Options for slave_allow_batching

     *Command-Line        `--slave-allow-batching'        
     Format*                              
     *Option-File Format* `slave_allow_batching'        
     *System Variable     `slave_allow_batching'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `off'           

     Whether or not batched updates are enabled on MySQL Cluster
     replication slaves.

     Currently, this variable is available for *Note `mysqld': mysqld.
     only as supplied with MySQL Cluster or built from the MySQL
     Cluster sources. For more information, see *Note
     mysql-cluster-replication-starting::.

     Setting this variable had no effect in MySQL Cluster NDB 7.2 prior
     to MySQL Cluster NDB 7.2.10. (Bug #15953730)

   *  `ndb_table_no_logging'

     Options for ndb_table_no_logging

     *System Variable     `ndb_table_no_logging'        
     Name*                                
     *Variable Scope*     Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     When this variable is set to `ON' or `1', it causes *Note `NDB':
     mysql-cluster. tables not to be checkpointed to disk. More
     specifically, this setting applies to tables which are created or
     altered using `ENGINE NDB' when `ndb_table_no_logging' is enabled,
     and continues to apply for the lifetime of the table, even if
     `ndb_table_no_logging' is later changed. Suppose that `A', `B',
     `C', and `D' are tables that we create (and perhaps also alter),
     and that we also change the setting for `ndb_table_no_logging' as
     shown here:

          SET @@ndb_table_no_logging = 1;

          CREATE TABLE A ... ENGINE NDB;

          CREATE TABLE B ... ENGINE MYISAM;
          CREATE TABLE C ... ENGINE MYISAM;

          ALTER TABLE B ENGINE NDB;

          SET @@ndb_table_no_logging = 0;

          CREATE TABLE D ... ENGINE NDB;
          ALTER TABLE C ENGINE NDB;

          SET @@ndb_table_no_logging = 1;

     After the previous sequence of events, tables `A' and `B' are not
     checkpointed; `A' was created with `ENGINE NDB' and B was altered
     to use `NDB', both while `ndb_table_no_logging' was enabled.
     However, tables `C' and `D' are logged; `C' was altered to use
     *Note `NDB': mysql-cluster. and `D' was created using `ENGINE
     NDB', both while `ndb_table_no_logging' was disabled. Setting
     `ndb_table_no_logging' back to `1' or `ON' does _not_ cause table
     `C' or `D' to be checkpointed.

     *Note*:

     `ndb_table_no_logging' has no effect on the creation of *Note
     `NDB': mysql-cluster. table schema files; to suppress these, use
     `ndb_table_temporary' instead.

   *  `ndb_table_temporary'

     Options for ndb_table_temporary

     *System Variable     `ndb_table_temporary'        
     Name*                                
     *Variable Scope*     Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     When set to `ON' or `1', this variable causes *Note `NDB':
     mysql-cluster. tables not to be written to disk: This means that
     no table schema files are created, and that the tables are not
     logged.

     *Note*:

     Setting this variable currently has no effect in MySQL Cluster NDB
     7.0 and later. This is a known issue; see Bug #34036.

   *  `ndb_use_copying_alter_table'

     Options for ndb_use_copying_alter_table

     *System Variable     `ndb_use_copying_alter_table'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   No              

     Forces *Note `NDB': mysql-cluster. to use copying of tables in the
     event of problems with online *Note `ALTER TABLE': alter-table.
     operations. The default value is `OFF'.

   *  `ndb_use_exact_count'

     Options for ndb_use_exact_count

     *System Variable     `ndb_use_exact_count'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            

     Forces *Note `NDB': mysql-cluster. to use a count of records
     during `SELECT COUNT(*)' query planning to speed up this type of
     query. The default value is `ON'. For faster queries overall,
     disable this feature by setting the value of `ndb_use_exact_count'
     to `OFF'.

   *  `ndb_use_transactions'

     Options for ndb_use_transactions

     *Command-Line        `--ndb_use_transactions'        
     Format*                              
     *Option-File Format* `ndb_use_transactions'        
     *System Variable     `ndb_use_transactions'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `ON'            

     You can disable *Note `NDB': mysql-cluster. transaction support by
     setting this variable's values to `OFF' (not recommended). The
     default is `ON'.

   *  `transaction_allow_batching'

     Options for transaction_allow_batching

     *System Variable     `transaction_allow_batching'        
     Name*                                
     *Variable Scope*     Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     When set to `1' or `ON', this variable enables batching of
     statements within the same transaction. To use this variable,
     `autocommit' must first be disabled by setting it to `0' or `OFF';
     otherwise, setting `transaction_allow_batching' has no effect.

     It is safe to use this variable with transactions that performs
     writes only, as having it enabled can lead to reads from the
     `before' image. You should ensure that any pending transactions
     are committed (using an explicit *Note `COMMIT': commit. if
     desired) before issuing a *Note `SELECT': select.

     *Important*:

     `transaction_allow_batching' should not be used whenever there is
     the possibility that the effects of a given statement depend on
     the outcome of a previous statement within the same transaction.

     This variable is currently supported for MySQL Cluster only.

     *Important*:

     Due an issue in the MySQL Cluster NDB 7.2 codebase (Bug #64697)
     prior to General Availability, this variable is not available
     prior to MySQL Cluster NDB 7.2.6.

The system variables in the following list all relate to the *Note
`ndbinfo': mysql-cluster-ndbinfo. information database.

   *  `ndbinfo_database'

     Options for ndbinfo_database

     *System Variable     `ndbinfo_database'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `ndbinfo'        

     Shows the name used for the `NDB' information database; the
     default is `ndbinfo'. This is a read-only variable whose value is
     determined at compile time; you can set it by starting the server
     using `--ndbinfo-database=NAME', which sets the value shown for
     this variable but does not actually change the name used for the
     NDB information database.

   *  `ndbinfo_max_bytes'

     Options for ndbinfo_max_bytes

     *Command-Line        `--ndbinfo-max-bytes=#'        
     Format*                              
     *System Variable     `ndbinfo_max_bytes'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             

     Used in testing and debugging only.

   *  `ndbinfo_max_rows'

     Options for ndbinfo_max_rows

     *Command-Line        `--ndbinfo-max-rows=#'        
     Format*                              
     *System Variable     `ndbinfo_max_rows'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `10'            

     Used in testing and debugging only.

   *  `ndbinfo_show_hidden'

     Options for ndbinfo_show_hidden

     *Command-Line        `--ndbinfo-show-hidden={0|1}'        
     Format*                              
     *System Variable     `ndbinfo_show_hidden'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     Whether or not the *Note `ndbinfo': mysql-cluster-ndbinfo.
     database's underlying internal tables are shown in the `mysql'
     client. The default is `OFF'.

   *  `ndbinfo_table_prefix'

     Options for ndbinfo_table_prefix

     *Command-Line        `--ndbinfo-table-prefix=name'        
     Format*                              
     *System Variable     `ndbinfo_table_prefix'        
     Name*                                
     *Variable Scope*     Global,         
                          Session         
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `ndb$'          

     The prefix used in naming the ndbinfo database's base tables
     (normally hidden, unless exposed by setting
     `ndbinfo_show_hidden'). This is a read-only variable whose default
     value is ``ndb$''. You can start the server with the
     `--ndbinfo-table-prefix' option, but this merely sets the variable
     and does not change the actual prefix used to name the hidden base
     tables; the prefix itself is determined at compile time.

   *  `ndbinfo_version'

     Options for ndbinfo_version

     *System Variable     `ndbinfo_version'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `'              

     Shows the version of the *Note `ndbinfo': mysql-cluster-ndbinfo.
     engine in use; read-only.

   *  `ndb_log_empty_epochs'

     Options for ndb_log_empty_epochs

     *Command-Line        `--ndb-log-empty-epochs'        
     Format*                              
     *Option-File Format* `ndb_log_empty_epochs'        
     *System Variable     `ndb_log_empty_epochs'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   Yes             
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     When this variable is set to 0, epoch transactions with no changes
     are not written to the binary log, although a row is still written
     even for an empty epoch in `ndb_binlog_index'.

   *  `server_id_bits'

     Options for server-id-bits

     *Command-Line        `--server-id-bits=#'        
     Format*                              
     *Option-File Format* `server-id-bits'        
     *System Variable     `server_id_bits'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `32'            
     *Range*              `7 ..           
                          32'             

     The effective value of `server_id' if the server was started with
     the `--server-id-bits' option set to a nondefault value.

     If the value of `server_id' greater than or equal to 2 to the
     power of `server_id_bits', *Note `mysqld': mysqld. refuses to
     start.

     This system variable is supported only by MySQL Cluster.
     `server_id_bits' is not supported by the standard MySQL Server.


File: manual.info,  Node: mysql-cluster-status-variables,  Prev: mysql-cluster-system-variables,  Up: mysql-cluster-options-variables

17.3.4.4 MySQL Cluster Status Variables
.......................................

This section provides detailed information about MySQL server status
variables that relate to MySQL Cluster and the *Note `NDB':
mysql-cluster. storage engine. For status variables not specific to
MySQL Cluster, and for general information on using status variables,
see *Note server-status-variables::.

   *  `Handler_discover'

     The MySQL server can ask the *Note `NDBCLUSTER': mysql-cluster.
     storage engine if it knows about a table with a given name. This
     is called discovery.  `Handler_discover' indicates the number of
     times that tables have been discovered using this mechanism.

   *  `Ndb_api_wait_exec_complete_count_session'

     The number of times a thread has been blocked in this client
     session while waiting for execution of an operation to complete.
     This includes all `execute()'
     (http://dev.mysql.com/doc/ndbapi/en/ndb-ndbtransaction-methods.html#ndb-ndbtransaction-execute)
     calls as well as implicit implicit executes for blob and
     auto-increment operations not visible to clients.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it relates to the current session only, and is not affected by any
     other clients of this *Note `mysqld': mysqld.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_wait_exec_complete_count_slave'

     The number of times a thread has been blocked by this slave while
     waiting for execution of an operation to complete.  This includes
     all `execute()'
     (http://dev.mysql.com/doc/ndbapi/en/ndb-ndbtransaction-methods.html#ndb-ndbtransaction-execute)
     calls as well as implicit implicit executes for blob and
     auto-increment operations not visible to clients.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope. If this MySQL server does not
     act as a replication slave, or does not use NDB tables, this value
     is always 0.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_wait_exec_complete_count'

     The number of times a thread has been blocked by this MySQL Server
     (SQL node) while waiting for execution of an operation to
     complete. This includes all `execute()'
     (http://dev.mysql.com/doc/ndbapi/en/ndb-ndbtransaction-methods.html#ndb-ndbtransaction-execute)
     calls as well as implicit implicit executes for blob and
     auto-increment operations not visible to clients.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_wait_scan_result_count_session'

     The number of times a thread has been blocked in this client
     session while waiting for a scan-based signal, such as when
     waiting for more results from a scan, or when waiting for a scan
     to close.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it relates to the current session only, and is not affected by any
     other clients of this *Note `mysqld': mysqld.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_wait_scan_result_count_slave'

     The number of times a thread has been blocked by this slave while
     waiting for a scan-based signal, such as when waiting for more
     results from a scan, or when waiting for a scan to close.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope. If this MySQL server does not
     act as a replication slave, or does not use NDB tables, this value
     is always 0.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_wait_scan_result_count'

     The number of times a thread has been blocked by this MySQL Server
     (SQL node) while waiting for a scan-based signal, such as when
     waiting for more results from a scan, or when waiting for a scan
     to close.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_wait_meta_request_count_session'

     The number of times a thread has been blocked in this client
     session waiting for a metadata-based signal, such as is expected
     for DDL requests, new epochs, and seizure of transaction records.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it relates to the current session only, and is not affected by any
     other clients of this *Note `mysqld': mysqld.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_wait_meta_request_count_slave'

     The number of times a thread has been blocked by this slave
     waiting for a metadata-based signal, such as is expected for DDL
     requests, new epochs, and seizure of transaction records.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope. If this MySQL server does not
     act as a replication slave, or does not use NDB tables, this value
     is always 0.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_wait_meta_request_count'

     The number of times a thread has been blocked by this MySQL Server
     (SQL node) waiting for a metadata-based signal, such as is
     expected for DDL requests, new epochs, and seizure of transaction
     records.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_wait_nanos_count_session'

     Total time (in nanoseconds) spent in this client session waiting
     for any type of signal from the data nodes.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it relates to the current session only, and is not affected by any
     other clients of this *Note `mysqld': mysqld.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_wait_nanos_count_slave'

     Total time (in nanoseconds) spent by this slave waiting for any
     type of signal from the data nodes.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope. If this MySQL server does not
     act as a replication slave, or does not use NDB tables, this value
     is always 0.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_wait_nanos_count'

     Total time (in nanoseconds) spent by this MySQL Server (SQL node)
     waiting for any type of signal from the data nodes.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_bytes_sent_count_session'

     Amount of data (in bytes) sent to the data nodes in this client
     session.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it relates to the current session only, and is not affected by any
     other clients of this *Note `mysqld': mysqld.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_bytes_sent_count_slave'

     Amount of data (in bytes) sent to the data nodes by this slave.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope. If this MySQL server does not
     act as a replication slave, or does not use NDB tables, this value
     is always 0.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_bytes_sent_count'

     Amount of data (in bytes) sent to the data nodes by this MySQL
     Server (SQL node).

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_bytes_received_count_session'

     Amount of data (in bytes) received from the data nodes in this
     client session.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it relates to the current session only, and is not affected by any
     other clients of this *Note `mysqld': mysqld.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_bytes_received_count_slave'

     Amount of data (in bytes) received from the data nodes by this
     slave.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope. If this MySQL server does not
     act as a replication slave, or does not use NDB tables, this value
     is always 0.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_bytes_received_count'

     Amount of data (in bytes) received from the data nodes by this
     MySQL Server (SQL node).

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_trans_start_count_session'

     The number of transactions started in this client session.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it relates to the current session only, and is not affected by any
     other clients of this *Note `mysqld': mysqld.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_trans_start_count_slave'

     The number of transactions started by this slave.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope. If this MySQL server does not
     act as a replication slave, or does not use NDB tables, this value
     is always 0.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_trans_start_count'

     The number of transactions started by this MySQL Server (SQL node).

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_trans_commit_count_session'

     The number of transactions committed in this client session.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it relates to the current session only, and is not affected by any
     other clients of this *Note `mysqld': mysqld.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_trans_commit_count_slave'

     The number of transactions committed by this slave.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope. If this MySQL server does not
     act as a replication slave, or does not use NDB tables, this value
     is always 0.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_trans_commit_count'

     The number of transactions committed by this MySQL Server (SQL
     node).

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_trans_abort_count_session'

     The number of transactions aborted in this client session.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it relates to the current session only, and is not affected by any
     other clients of this *Note `mysqld': mysqld.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_trans_abort_count_slave'

     The number of transactions aborted by this slave.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope. If this MySQL server does not
     act as a replication slave, or does not use NDB tables, this value
     is always 0.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_trans_abort_count'

     The number of transactions aborted by this MySQL Server (SQL node).

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_trans_close_count_session'

     The number of transactions closed in this client session.  This
     value may be greater than the sum of
     `Ndb_api_trans_commit_count_session' and
     `Ndb_api_trans_abort_count_session', since some transactions may
     have been rolled back.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it relates to the current session only, and is not affected by any
     other clients of this *Note `mysqld': mysqld.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_trans_close_count_slave'

     The number of transactions closed by this slave. This value may be
     greater than the sum of `Ndb_api_trans_commit_count_slave' and
     `Ndb_api_trans_abort_count_slave', since some transactions may
     have been rolled back.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope. If this MySQL server does not
     act as a replication slave, or does not use NDB tables, this value
     is always 0.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_trans_close_count'

     The number of transactions closed by this MySQL Server (SQL node).
     This value may be greater than the sum of
     `Ndb_api_trans_commit_count' and `Ndb_api_trans_abort_count',
     since some transactions may have been rolled back.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_pk_op_count_session'

     The number of operations in this client session based on or using
     primary keys. This includes operations on blob tables, implicit
     unlock operations, and auto-increment operations, as well as
     user-visible primary key operations.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it relates to the current session only, and is not affected by any
     other clients of this *Note `mysqld': mysqld.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_pk_op_count_slave'

     The number of operations by this slave based on or using primary
     keys. This includes operations on blob tables, implicit unlock
     operations, and auto-increment operations, as well as user-visible
     primary key operations.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope. If this MySQL server does not
     act as a replication slave, or does not use NDB tables, this value
     is always 0.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_pk_op_count'

     The number of operations by this MySQL Server (SQL node) based on
     or using primary keys. This includes operations on blob tables,
     implicit unlock operations, and auto-increment operations, as well
     as user-visible primary key operations.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_uk_op_count_session'

     The number of operations in this client session based on or using
     unique keys.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it relates to the current session only, and is not affected by any
     other clients of this *Note `mysqld': mysqld.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_uk_op_count_slave'

     The number of operations by this slave based on or using unique
     keys.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope. If this MySQL server does not
     act as a replication slave, or does not use NDB tables, this value
     is always 0.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_uk_op_count'

     The number of operations by this MySQL Server (SQL node) based on
     or using unique keys.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_table_scan_count_session'

     The number of table scans that have been started in this client
     session, including scans of internal tables,.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it relates to the current session only, and is not affected by any
     other clients of this *Note `mysqld': mysqld.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_table_scan_count_slave'

     The number of table scans that have been started by this slave,
     including scans of internal tables,.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope. If this MySQL server does not
     act as a replication slave, or does not use NDB tables, this value
     is always 0.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_table_scan_count'

     The number of table scans that have been started by this MySQL
     Server (SQL node), including scans of internal tables,.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_range_scan_count_session'

     The number of range scans that have been started in this client
     session.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it relates to the current session only, and is not affected by any
     other clients of this *Note `mysqld': mysqld.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_range_scan_count_slave'

     The number of range scans that have been started by this slave.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope. If this MySQL server does not
     act as a replication slave, or does not use NDB tables, this value
     is always 0.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_range_scan_count'

     The number of range scans that have been started by this MySQL
     Server (SQL node).

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_pruned_scan_count_session'

     The number of scans in this client session that have been pruned
     to a single partition.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it relates to the current session only, and is not affected by any
     other clients of this *Note `mysqld': mysqld.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_pruned_scan_count_slave'

     The number of scans by this slave that have been pruned to a
     single partition.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope. If this MySQL server does not
     act as a replication slave, or does not use NDB tables, this value
     is always 0.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_pruned_scan_count'

     The number of scans by this MySQL Server (SQL node) that have been
     pruned to a single partition.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_scan_batch_count_session'

     The number of batches of rows received in this client session. 1
     batch is defined as 1 set of scan results from a single fragment.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it relates to the current session only, and is not affected by any
     other clients of this *Note `mysqld': mysqld.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_scan_batch_count_slave'

     The number of batches of rows received by this slave. 1 batch is
     defined as 1 set of scan results from a single fragment.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope. If this MySQL server does not
     act as a replication slave, or does not use NDB tables, this value
     is always 0.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_scan_batch_count'

     The number of batches of rows received by this MySQL Server (SQL
     node). 1 batch is defined as 1 set of scan results from a single
     fragment.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_read_row_count_session'

     The total number of rows that have been read in this client
     session. This includes all rows read by any primary key, unique
     key, or scan operation made in this client session.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it relates to the current session only, and is not affected by any
     other clients of this *Note `mysqld': mysqld.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_read_row_count_slave'

     The total number of rows that have been read by this slave.  This
     includes all rows read by any primary key, unique key, or scan
     operation made by this slave.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope. If this MySQL server does not
     act as a replication slave, or does not use NDB tables, this value
     is always 0.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_read_row_count'

     The total number of rows that have been read by this MySQL Server
     (SQL node). This includes all rows read by any primary key, unique
     key, or scan operation made by this MySQL Server (SQL node).

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_trans_local_read_row_count_session'

     The total number of rows that have been read in this client
     session. This includes all rows read by any primary key, unique
     key, or scan operation made in this client session.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it relates to the current session only, and is not affected by any
     other clients of this *Note `mysqld': mysqld.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_trans_local_read_row_count_slave'

     The total number of rows that have been read by this slave.  This
     includes all rows read by any primary key, unique key, or scan
     operation made by this slave.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope. If this MySQL server does not
     act as a replication slave, or does not use NDB tables, this value
     is always 0.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_trans_local_read_row_count'

     The total number of rows that have been read by this MySQL Server
     (SQL node). This includes all rows read by any primary key, unique
     key, or scan operation made by this MySQL Server (SQL node).

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_event_data_count_injector'

     The number of row change events received by the NDB binlog
     injector thread.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_event_data_count'

     The number of row change events received by this MySQL Server (SQL
     node).

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_event_nondata_count_injector'

     The number of events received, other than row change events, by
     the NDB binlog injector thread.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_event_nondata_count'

     The number of events received, other than row change events, by
     this MySQL Server (SQL node).

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_event_bytes_count_injector'

     The number of bytes of events received by the NDB binlog injector
     thread.

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_api_event_bytes_count'

     The number of bytes of events received by this MySQL Server (SQL
     node).

     Although this variable can be read using either *Note `SHOW GLOBAL
     STATUS': show-status. or *Note `SHOW SESSION STATUS': show-status,
     it is effectively global in scope.

     For more information, see *Note mysql-cluster-ndb-api-statistics::.

   *  `Ndb_cluster_node_id'

     If the server is acting as a MySQL Cluster node, then the value of
     this variable its node ID in the cluster.

     If the server is not part of a MySQL Cluster, then the value of
     this variable is 0.

   *  `Ndb_config_from_host'

     If the server is part of a MySQL Cluster, the value of this
     variable is the host name or IP address of the Cluster management
     server from which it gets its configuration data.

     If the server is not part of a MySQL Cluster, then the value of
     this variable is an empty string.

   *  `Ndb_config_from_port'

     If the server is part of a MySQL Cluster, the value of this
     variable is the number of the port through which it is connected
     to the Cluster management server from which it gets its
     configuration data.

     If the server is not part of a MySQL Cluster, then the value of
     this variable is 0.

   *  `Ndb_conflict_fn_max'

     Used in MySQL Cluster Replication conflict resolution, this
     variable shows the number of times that a row was not applied on
     the current SQL node due to `greatest timestamp wins' conflict
     resolution since the last time that this *Note `mysqld': mysqld.
     was started.

     For more information, see *Note
     mysql-cluster-replication-conflict-resolution::.

   *  `Ndb_conflict_fn_old'

     Used in MySQL Cluster Replication conflict resolution, this
     variable shows the number of times that a row was not applied as
     the result of `same timestamp wins' conflict resolution on a given
     *Note `mysqld': mysqld.  since the last time it was restarted.

     For more information, see *Note
     mysql-cluster-replication-conflict-resolution::.

   *  `Ndb_conflict_fn_epoch'

     Used in MySQL Cluster Replication conflict resolution, this
     variable shows the number of rows found to be in conflict using
     `NDB$EPOCH()' conflict resolution on a given *Note `mysqld':
     mysqld. since the last time it was restarted.

     For more information, see *Note
     mysql-cluster-replication-conflict-resolution::.

   *  `Ndb_conflict_fn_epoch_trans'

     Used in MySQL Cluster Replication conflict resolution, this
     variable shows the number of rows found to be in conflict using
     `NDB$EPOCH_TRANS()' conflict resolution on a given *Note `mysqld':
     mysqld. since the last time it was restarted.

     For more information, see *Note
     mysql-cluster-replication-conflict-resolution::.

   *  `Ndb_conflict_trans_row_conflict_count'

     Used in MySQL Cluster Replication conflict resolution, this status
     variable shows the number of rows found to be directly in-conflict
     by a transactional conflict function on a given *Note `mysqld':
     mysqld. since the last time it was restarted.

     Currently, the only transactional conflict detection function
     supported by MySQL Cluster is NDB$EPOCH_TRANS(), so this status
     variable is effectively the same as `Ndb_conflict_fn_epoch_trans'.

     For more information, see *Note
     mysql-cluster-replication-conflict-resolution::.

   *  `Ndb_conflict_trans_row_reject_count'

     Used in MySQL Cluster Replication conflict resolution, this status
     variable shows the total number of rows realigned due to being
     determined as conflicting by a transactional conflict detection
     function. This includes not only
     `Ndb_conflict_trans_row_conflict_count', but any rows in or
     dependent on conflicting transactions.

     For more information, see *Note
     mysql-cluster-replication-conflict-resolution::.

   *  `Ndb_conflict_trans_reject_count'

     Used in MySQL Cluster Replication conflict resolution, this status
     variable shows the number of transactions found to be in conflict
     by a transactional conflict detection function.

     For more information, see *Note
     mysql-cluster-replication-conflict-resolution::.

   *  `Ndb_conflict_trans_detect_iter_count'

     Used in MySQL Cluster Replication conflict resolution, this shows
     the number of internal iterations required to commit an epoch
     transaction. Should be (slightly) greater than or equal to
     `Ndb_conflict_trans_conflict_commit_count'.

     For more information, see *Note
     mysql-cluster-replication-conflict-resolution::.

   *  `Ndb_conflict_trans_conflict_commit_count'

     Used in MySQL Cluster Replication conflict resolution, this shows
     the number of epoch transactions committed after they required
     transactional conflict handling.

     For more information, see *Note
     mysql-cluster-replication-conflict-resolution::.

   *  `Ndb_execute_count'

     Provides the number of round trips to the *Note `NDB':
     mysql-cluster. kernel made by operations.

   *  `Ndb_number_of_data_nodes'

     If the server is part of a MySQL Cluster, the value of this
     variable is the number of data nodes in the cluster.

     If the server is not part of a MySQL Cluster, then the value of
     this variable is 0.

   *  `Ndb_pushed_queries_defined'

     The total number of joins pushed down to the NDB kernel for
     distributed handling on the data nodes. Note that joins tested
     using *Note `EXPLAIN': explain. that can be pushed down contribute
     to this number. Added in MySQL Cluster NDB 7.2.0.

   *  `Ndb_pushed_queries_dropped'

     The number of joins that were pushed down to the NDB kernel but
     that could not be handled there. Added in MySQL Cluster NDB 7.2.0.

   *  `Ndb_pushed_queries_executed'

     The number of joins successfully pushed down to *Note `NDB':
     mysql-cluster. and executed there. Added in MySQL Cluster NDB
     7.2.0.

   *  `Ndb_pushed_reads'

     The number of rows returned to *Note `mysqld': mysqld.  from the
     NDB kernel by joins that were pushed down. Note that executing
     *Note `EXPLAIN': explain. on joins that can be pushed down to
     *Note `NDB': mysql-cluster. does not add to this number. Added in
     MySQL Cluster NDB 7.2.0.

   *  `Ndb_pruned_scan_count'

     This variable holds a count of the number of scans executed by
     *Note `NDBCLUSTER': mysql-cluster. since the MySQL Cluster was
     last started where *Note `NDBCLUSTER': mysql-cluster. was able to
     use partition pruning.

     Using this variable together with `Ndb_scan_count' can be helpful
     in schema design to maximize the ability of the server to prune
     scans to a single table partition, thereby involving only a single
     data node.

   *  `Ndb_scan_count'

     This variable holds a count of the total number of scans executed
     by *Note `NDBCLUSTER': mysql-cluster. since the MySQL Cluster was
     last started.


File: manual.info,  Node: mysql-cluster-interconnects,  Prev: mysql-cluster-options-variables,  Up: mysql-cluster-configuration

17.3.5 Using High-Speed Interconnects with MySQL Cluster
--------------------------------------------------------

* Menu:

* mysql-cluster-sci-sockets::    Configuring MySQL Cluster to use SCI Sockets
* mysql-cluster-interconnects-performance::  MySQL Cluster Interconnects and Performance

Even before design of *Note `NDBCLUSTER': mysql-cluster.  began in
1996, it was evident that one of the major problems to be encountered
in building parallel databases would be communication between the nodes
in the network. For this reason, *Note `NDBCLUSTER': mysql-cluster. was
designed from the very beginning to permit the use of a number of
different data transport mechanisms. In this Manual, we use the term
_transporter_ for these.

The MySQL Cluster codebase provides for four different transporters:

   * _TCP/IP using 100 Mbps or gigabit Ethernet_, as discussed in *Note
     mysql-cluster-tcp-definition::.

   * _Direct (machine-to-machine) TCP/IP_; although this transporter
     uses the same TCP/IP protocol as mentioned in the previous item,
     it requires setting up the hardware differently and is configured
     differently as well.  For this reason, it is considered a separate
     transport mechanism for MySQL Cluster. See *Note
     mysql-cluster-tcp-definition-direct::, for details.

   * _Shared memory (SHM)_. For more information about SHM, see *Note
     mysql-cluster-shm-definition::.

     *Note*:

     SHM is considered experimental only, and is not officially
     supported.

   * _Scalable Coherent Interface (SCI)_, as described in the next
     section of this chapter, *Note mysql-cluster-sci-definition::.

Most users today employ TCP/IP over Ethernet because it is ubiquitous.
TCP/IP is also by far the best-tested transporter for use with MySQL
Cluster.

We are working to make sure that communication with the *Note `ndbd':
mysql-cluster-programs-ndbd. process is made in `chunks' that are as
large as possible because this benefits all types of data transmission.

For users who desire it, it is also possible to use cluster
interconnects to enhance performance even further. There are two ways
to achieve this: Either a custom transporter can be designed to handle
this case, or you can use socket implementations that bypass the TCP/IP
stack to one extent or another. We have experimented with both of these
techniques using the SCI (Scalable Coherent Interface) technology
developed by Dolphin Interconnect Solutions
(http://www.dolphinics.com/).


File: manual.info,  Node: mysql-cluster-sci-sockets,  Next: mysql-cluster-interconnects-performance,  Prev: mysql-cluster-interconnects,  Up: mysql-cluster-interconnects

17.3.5.1 Configuring MySQL Cluster to use SCI Sockets
.....................................................

It is possible employing Scalable Coherent Interface (SCI) technology
to achieve a significant increase in connection speeds and throughput
between MySQL Cluster data and SQL nodes.  To use SCI, it is necessary
to obtain and install Dolphin SCI network cards and to use the drivers
and other software supplied by Dolphin. You can get information on
obtaining these, from Dolphin Interconnect Solutions
(http://www.dolphinics.com/). SCI SuperSocket or SCI Transporter
support is available for 32-bit and 64-bit Linux, Solaris, Windows, and
other platforms. See the Dolphin documentation referenced later in this
section for more detailed information regarding platforms supported for
SCI.

Once you have acquired the required Dolphin hardware and software, you
can obtain detailed information on how to adapt a MySQL Cluster
configured for normal TCP/IP communication to use SCI from the from the
Dolphin SCI online documentation
(http://www.dolphinics.com/support/sci-product-documentation-software.html).


File: manual.info,  Node: mysql-cluster-interconnects-performance,  Prev: mysql-cluster-sci-sockets,  Up: mysql-cluster-interconnects

17.3.5.2 MySQL Cluster Interconnects and Performance
....................................................

The *Note `ndbd': mysql-cluster-programs-ndbd. process has a number of
simple constructs which are used to access the data in a MySQL Cluster.
We have created a very simple benchmark to check the performance of
each of these and the effects which various interconnects have on their
performance.

There are four access methods:

   * Primary key access

     This is access of a record through its primary key. In the
     simplest case, only one record is accessed at a time, which means
     that the full cost of setting up a number of TCP/IP messages and a
     number of costs for context switching are borne by this single
     request. In the case where multiple primary key accesses are sent
     in one batch, those accesses share the cost of setting up the
     necessary TCP/IP messages and context switches. If the TCP/IP
     messages are for different destinations, additional TCP/IP
     messages need to be set up.

   * Unique key access

     Unique key accesses are similar to primary key accesses, except
     that a unique key access is executed as a read on an index table
     followed by a primary key access on the table. However, only one
     request is sent from the MySQL Server, and the read of the index
     table is handled by *Note `ndbd': mysql-cluster-programs-ndbd.
     Such requests also benefit from batching.

   * Full table scan

     When no indexes exist for a lookup on a table, a full table scan
     is performed. This is sent as a single request to the *Note
     `ndbd': mysql-cluster-programs-ndbd. process, which then divides
     the table scan into a set of parallel scans on all cluster *Note
     `ndbd': mysql-cluster-programs-ndbd. processes. In future versions
     of MySQL Cluster, an SQL node will be able to filter some of these
     scans.

   * Range scan using ordered index

     When an ordered index is used, it performs a scan in the same
     manner as the full table scan, except that it scans only those
     records which are in the range used by the query transmitted by
     the MySQL server (SQL node). All partitions are scanned in
     parallel when all bound index attributes include all attributes in
     the partitioning key.

With benchmarks developed internally by MySQL for testing simple and
batched primary and unique key accesses, we have found that using SCI
sockets improves performance by approximately 100% over TCP/IP, except
in rare instances when communication performance is not an issue. This
can occur when scan filters make up most of processing time or when
very large batches of primary key accesses are achieved. In that case,
the CPU processing in the *Note `ndbd': mysql-cluster-programs-ndbd.
processes becomes a fairly large part of the overhead.

Using the SCI transporter instead of SCI Sockets is only of interest in
communicating between *Note `ndbd': mysql-cluster-programs-ndbd.
processes. Using the SCI transporter is also only of interest if a CPU
can be dedicated to the *Note `ndbd': mysql-cluster-programs-ndbd.
process because the SCI transporter ensures that this process will never
go to sleep. It is also important to ensure that the *Note `ndbd':
mysql-cluster-programs-ndbd. process priority is set in such a way that
the process does not lose priority due to running for an extended
period of time, as can be done by locking processes to CPUs in Linux
2.6. If such a configuration is possible, the *Note `ndbd':
mysql-cluster-programs-ndbd. process will benefit by 10-70% as compared
with using SCI sockets. (The larger figures will be seen when
performing updates and probably on parallel scan operations as well.)

There are several other optimized socket implementations for computer
clusters, including Myrinet, Gigabit Ethernet, Infiniband and the VIA
interface. However, we have tested MySQL Cluster so far only with SCI
sockets. See *Note mysql-cluster-sci-sockets::, for information on how
to set up SCI sockets using ordinary TCP/IP for MySQL Cluster.


File: manual.info,  Node: mysql-cluster-programs,  Next: mysql-cluster-management,  Prev: mysql-cluster-configuration,  Up: mysql-cluster

17.4 MySQL Cluster Programs
===========================

* Menu:

* mysql-cluster-programs-ndbd::  `ndbd' --- The MySQL Cluster Data Node Daemon
* mysql-cluster-programs-ndbinfo-select-all::  `ndbinfo_select_all' --- Select From ndbinfo Tables
* mysql-cluster-programs-ndbmtd::  `ndbmtd' --- The MySQL Cluster Data Node Daemon (Multi-Threaded)
* mysql-cluster-programs-ndb-mgmd::  `ndb_mgmd' --- The MySQL Cluster Management Server Daemon
* mysql-cluster-programs-ndb-mgm::  `ndb_mgm' --- The MySQL Cluster Management Client
* mysql-cluster-programs-ndb-blob-tool::  `ndb_blob_tool' --- Check and Repair BLOB and TEXT columns of MySQL Cluster Tables
* mysql-cluster-programs-ndb-config::  `ndb_config' --- Extract MySQL Cluster Configuration Information
* mysql-cluster-programs-ndb-cpcd::  `ndb_cpcd' --- Automate Testing for NDB Development
* mysql-cluster-programs-ndb-delete-all::  `ndb_delete_all' --- Delete All Rows from an NDB Table
* mysql-cluster-programs-ndb-desc::  `ndb_desc' --- Describe NDB Tables
* mysql-cluster-programs-ndb-drop-index::  `ndb_drop_index' --- Drop Index from an NDB Table
* mysql-cluster-programs-ndb-drop-table::  `ndb_drop_table' --- Drop an NDB Table
* mysql-cluster-programs-ndb-error-reporter::  `ndb_error_reporter' --- NDB Error-Reporting Utility
* mysql-cluster-programs-ndb-index-stat::  `ndb_index_stat' --- NDB Index Statistics Utility
* mysql-cluster-programs-ndb-print-backup-file::  `ndb_print_backup_file' --- Print NDB Backup File Contents
* mysql-cluster-programs-ndb-print-schema-file::  `ndb_print_schema_file' --- Print NDB Schema File Contents
* mysql-cluster-programs-ndb-print-sys-file::  `ndb_print_sys_file' --- Print NDB System File Contents
* mysql-cluster-programs-ndbd-redo-log-reader::  `ndbd_redo_log_reader' --- Check and Print Content of Cluster Redo Log
* mysql-cluster-programs-ndb-restore::  `ndb_restore' --- Restore a MySQL Cluster Backup
* mysql-cluster-programs-ndb-select-all::  `ndb_select_all' --- Print Rows from an NDB Table
* mysql-cluster-programs-ndb-select-count::  `ndb_select_count' --- Print Row Counts for NDB Tables
* mysql-cluster-programs-ndb-show-tables::  `ndb_show_tables' --- Display List of NDB Tables
* mysql-cluster-programs-ndb-size-pl::  `ndb_size.pl' --- NDBCLUSTER Size Requirement Estimator
* mysql-cluster-programs-ndb-waiter::  `ndb_waiter' --- Wait for MySQL Cluster to Reach a Given Status
* mysql-cluster-program-options-common::  Options Common to MySQL Cluster Programs --- Options Common to MySQL Cluster Programs

Using and managing a MySQL Cluster requires several specialized
programs, which we describe in this chapter. We discuss the purposes of
these programs in a MySQL Cluster, how to use the programs, and what
startup options are available for each of them.

These programs include the MySQL Cluster data, management, and SQL node
processes (*Note `ndbd': mysql-cluster-programs-ndbd, *Note `ndbmtd':
mysql-cluster-programs-ndbmtd, *Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd, and *Note `mysqld': mysqld.) and the
management client (*Note `ndb_mgm': mysql-cluster-programs-ndb-mgm.).

For information about using *Note `mysqld': mysqld. as a MySQL Cluster
process, see *Note mysql-cluster-mysqld::.

Other *Note `NDB': mysql-cluster. utility, diagnostic, and example
programs are included with the MySQL Cluster distribution.  These
include *Note `ndb_restore': mysql-cluster-programs-ndb-restore, *Note
`ndb_show_tables': mysql-cluster-programs-ndb-show-tables, and *Note
`ndb_config': mysql-cluster-programs-ndb-config. These programs are
also covered in this section.

The final portion of this section contains tables of options that are
common to all the various MySQL Cluster programs.


File: manual.info,  Node: mysql-cluster-programs-ndbd,  Next: mysql-cluster-programs-ndbinfo-select-all,  Prev: mysql-cluster-programs,  Up: mysql-cluster-programs

17.4.1 `ndbd' -- The MySQL Cluster Data Node Daemon
---------------------------------------------------

*Note `ndbd': mysql-cluster-programs-ndbd. is the process that is used
to handle all the data in tables using the NDB Cluster storage engine.
This is the process that empowers a data node to accomplish distributed
transaction handling, node recovery, checkpointing to disk, online
backup, and related tasks.

In a MySQL Cluster, a set of *Note `ndbd': mysql-cluster-programs-ndbd.
processes cooperate in handling data. These processes can execute on the
same computer (host) or on different computers. The correspondences
between data nodes and Cluster hosts is completely configurable.

The following table includes command options specific to the MySQL
Cluster data node program *Note `ndbd': mysql-cluster-programs-ndbd.
Additional descriptions follow the table. For options common to most
MySQL Cluster programs (including *Note `ndbd':
mysql-cluster-programs-ndbd.), see *Note
mysql-cluster-program-options-common::.

*`ndbd' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note `ndbd':
mysql-cluster-programs-ndbd. program

Format                           Description               Added /
                                                           Removed
` --initial '                    Perform initial start of  All MySQL 5.5
                                 ndbd, including cleaning  based releases
                                 the file system.          
                                 Consult the               
                                 documentation before      
                                 using this option         
`--nostart',                     Don't start ndbd          All MySQL 5.5
                                 immediately; ndbd waits   based releases
` -n '                           for command to start from 
                                 ndb_mgmd                  
`--daemon',                      Start ndbd as daemon      All MySQL 5.5
                                 (default); override with  based releases
` -d '                           -nodaemon                 
` --nodaemon '                   Do not start ndbd as      All MySQL 5.5
                                 daemon; provided for      based releases
                                 testing purposes          
` --foreground '                 Run ndbd in foreground,   All MySQL 5.5
                                 provided for debugging    based releases
                                 purposes (implies         
                                 -nodaemon)                
` --nowait-nodes=list '          Do not wait for these     All MySQL 5.5
                                 data nodes to start       based releases
                                 (takes comma-separated    
                                 list of node IDs). Also   
                                 requires -ndb-nodeid to   
                                 be used.                  
` --initial-start '              Perform partial initial   All MySQL 5.5
                                 start (requires           based releases
                                 -nowait-nodes)            
` --bind-address=name '          Local bind address        All MySQL 5.5
                                                           based releases
` --install[=name] '             Used to install the data  All MySQL 5.5
                                 node process as a         based releases
                                 Windows service. Does not 
                                 apply on non-Windows      
                                 platforms.                
` --remove[=name] '              Used to remove a data     All MySQL 5.5
                                 node process that was     based releases
                                 previously installed as a 
                                 Windows service. Does     
                                 not apply on non-Windows  
                                 platforms.                
` --connect-retries=# '          Number of times to try    ADDED: NDB
                                 contacting the            7.2.9
                                 management server; set    
                                 to -1 to keep trying      
                                 indefinitely              
` --connect-delay=# '            Time to wait between      ADDED: NDB
                                 attempts to contact a     7.2.9
                                 management server, in     
                                 seconds                   

*Note*:

All of these options also apply to the multi-threaded version of this
program (*Note `ndbmtd': mysql-cluster-programs-ndbmtd.) and you may
substitute `*Note `ndbmtd': mysql-cluster-programs-ndbmtd.' for `*Note
`ndbd': mysql-cluster-programs-ndbd.' wherever the latter occurs in
this section.

   *  `--bind-address'

     Options for bind-address

     *Command-Line        `--bind-address=name'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `'              

     Causes *Note `ndbd': mysql-cluster-programs-ndbd. to bind to a
     specific network interface (host name or IP address). This option
     has no default value.

   *  `--daemon', `-d'

     Options for daemon

     *Command-Line        `--daemon'        
     Format*                              
                          `-d'            
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `TRUE'          

     Instructs *Note `ndbd': mysql-cluster-programs-ndbd. or *Note
     `ndbmtd': mysql-cluster-programs-ndbmtd. to execute as a daemon
     process.  This is the default behavior.  `--nodaemon' can be used
     to prevent the process from running as a daemon.

     This option has no effect when running *Note `ndbd':
     mysql-cluster-programs-ndbd. or *Note `ndbmtd':
     mysql-cluster-programs-ndbmtd. on Windows platforms.

   *  `--nodaemon'

     Options for nodaemon

     *Command-Line        `--nodaemon'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Prevents *Note `ndbd': mysql-cluster-programs-ndbd. or *Note
     `ndbmtd': mysql-cluster-programs-ndbmtd. from executing as a daemon
     process. This option overrides the `--daemon' option. This is
     useful for redirecting output to the screen when debugging the
     binary.

     The default behavior for *Note `ndbd':
     mysql-cluster-programs-ndbd. and *Note `ndbmtd':
     mysql-cluster-programs-ndbmtd. on Windows is to run in the
     foreground, making this option unnecessary on Windows platforms,
     where it has no effect.

   *  `--foreground'

     Options for foreground

     *Command-Line        `--foreground'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Causes *Note `ndbd': mysql-cluster-programs-ndbd. or *Note
     `ndbmtd': mysql-cluster-programs-ndbmtd.  to execute as a
     foreground process, primarily for debugging purposes. This option
     implies the `--nodaemon' option.

     This option has no effect when running *Note `ndbd':
     mysql-cluster-programs-ndbd. or *Note `ndbmtd':
     mysql-cluster-programs-ndbmtd. on Windows platforms.

   *  `--initial'

     Options for initial

     *Command-Line        `--initial'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Instructs *Note `ndbd': mysql-cluster-programs-ndbd. to perform an
     initial start. An initial start erases any files created for
     recovery purposes by earlier instances of *Note `ndbd':
     mysql-cluster-programs-ndbd. It also re-creates recovery log
     files. Note that on some operating systems this process can take a
     substantial amount of time.

     An `--initial' start is to be used _only_ when starting the *Note
     `ndbd': mysql-cluster-programs-ndbd. process under very special
     circumstances; this is because this option causes all files to be
     removed from the MySQL Cluster file system and all redo log files
     to be re-created. These circumstances are listed here:

        * When performing a software upgrade which has changed the
          contents of any files.

        * When restarting the node with a new version of *Note `ndbd':
          mysql-cluster-programs-ndbd.

        * As a measure of last resort when for some reason the node
          restart or system restart repeatedly fails. In this case, be
          aware that this node can no longer be used to restore data
          due to the destruction of the data files.

     Use of this option prevents the `StartPartialTimeout' and
     `StartPartitionedTimeout' configuration parameters from having any
     effect.

     *Important*:

     This option does _not_ affect either of the following types of
     files:

        * Backup files that have already been created by the affected
          node

        * MySQL Cluster Disk Data files (see *Note
          mysql-cluster-disk-data::).

     This option also has no effect on recovery of data by a data node
     that is just starting (or restarting) from data nodes that are
     already running. This recovery of data occurs automatically, and
     requires no user intervention in a MySQL Cluster that is running
     normally.

     It is permissible to use this option when starting the cluster for
     the very first time (that is, before any data node files have been
     created); however, it is _not_ necessary to do so.

   *  `--initial-start'

     Options for initial-start

     *Command-Line        `--initial-start'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     This option is used when performing a partial initial start of the
     cluster. Each node should be started with this option, as well as
     `--nowait-nodes'.

     Suppose that you have a 4-node cluster whose data nodes have the
     IDs 2, 3, 4, and 5, and you wish to perform a partial initial
     start using only nodes 2, 4, and 5--that is, omitting node 3:

          shell> ndbd --ndb-nodeid=2 --nowait-nodes=3 --initial-start
          shell> ndbd --ndb-nodeid=4 --nowait-nodes=3 --initial-start
          shell> ndbd --ndb-nodeid=5 --nowait-nodes=3 --initial-start

     When using this option, you must also specify the node ID for the
     data node being started with the `--ndb-nodeid' option.

     *Important*:

     Do not confuse this option with the `--nowait-nodes' option for
     *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd, which can be
     used to enable a cluster configured with multiple management
     servers to be started without all management servers being online.

   *  `--nowait-nodes=NODE_ID_1[, NODE_ID_2[, ...]]'

     Options for nowait-nodes

     *Command-Line        `--nowait-nodes=list'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `'              

     This option takes a list of data nodes which for which the cluster
     will not wait for before starting.

     This can be used to start the cluster in a partitioned state. For
     example, to start the cluster with only half of the data nodes
     (nodes 2, 3, 4, and 5) running in a 4-node cluster, you can start
     each *Note `ndbd': mysql-cluster-programs-ndbd. process with
     `--nowait-nodes=3,5'. In this case, the cluster starts as soon as
     nodes 2 and 4 connect, and does _not_ wait
     `StartPartitionedTimeout' milliseconds for nodes 3 and 5 to
     connect as it would otherwise.

     If you wanted to start up the same cluster as in the previous
     example without one *Note `ndbd': mysql-cluster-programs-ndbd.
     (say, for example, that the host machine for node 3 has suffered a
     hardware failure) then start nodes 2, 4, and 5 with
     `--nowait-nodes=3'. Then the cluster will start as soon as nodes
     2, 4, and 5 connect and will not wait for node 3 to start.

   *  `--nostart', `-n'

     Options for nostart

     *Command-Line        `--nostart'        
     Format*                              
                          `-n'            
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Instructs *Note `ndbd': mysql-cluster-programs-ndbd. not to start
     automatically. When this option is used, *Note `ndbd':
     mysql-cluster-programs-ndbd. connects to the management server,
     obtains configuration data from it, and initializes communication
     objects. However, it does not actually start the execution engine
     until specifically requested to do so by the management server.
     This can be accomplished by issuing the proper `START' command in
     the management client (see *Note
     mysql-cluster-mgm-client-commands::).

   *  `--install[=NAME]'

     Options for install

     *Command-Line        `--install[=name]'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `ndbd'          

     Causes *Note `ndbd': mysql-cluster-programs-ndbd. to be installed
     as a Windows service. Optionally, you can specify a name for the
     service; if not set, the service name defaults to `ndbd'. Although
     it is preferable to specify other *Note `ndbd':
     mysql-cluster-programs-ndbd. program options in a `my.ini' or
     `my.cnf' configuration file, it is possible to use together with
     `--install'. However, in such cases, the `--install' option must
     be specified first, before any other options are given, for the
     Windows service installation to succeed.

     It is generally not advisable to use this option together with the
     `--initial' option, since this causes the data node file system to
     be wiped and rebuilt every time the service is stopped and started.
     Extreme care should also be taken if you intend to use any of the
     other *Note `ndbd': mysql-cluster-programs-ndbd. options that
     affect the starting of data nodes--including `--initial-start',
     `--nostart', and `--nowait-nodes'--together with `--install', and
     you should make absolutely certain you fully understand and allow
     for any possible consequences of doing so.

     The `--install' option has no effect on non-Windows platforms.

   *  `--remove[=NAME]'

     Options for remove

     *Command-Line        `--remove[=name]'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `ndbd'          

     Causes an *Note `ndbd': mysql-cluster-programs-ndbd. process that
     was previously installed as a Windows service to be removed.
     Optionally, you can specify a name for the service to be
     uninstalled; if not set, the service name defaults to `ndbd'.

     The `--remove' option has no effect on non-Windows platforms.

   *  `--connect-retries=#'

     Options for connect-retries

     *Introduced*         5.5.27-ndb-7.2.9        
     *Command-Line        `--connect-retries=#'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `12'            
     *Range*              `-1 ..          
                          65535'          

     Determines the number of times that the data node attempts to
     contact a management server when starting. Setting this option to
     -1 causes the data node to keep trying to make contact
     indefinitely. The default is 12 attempts. The time to wait between
     attempts is controlled by the `--connect-delay' option.

     This option was added in MySQL Cluster NDB 7.2.9.

   *  `--connect-delay=#'

     Options for connect-delay

     *Introduced*         5.5.27-ndb-7.2.9        
     *Command-Line        `--connect-delay=#'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `5'             
     *Range*              `0 ..           
                          3600'           

     Determines the time to wait between attempts to contact a
     management server when starting (the time between attempts is
     controlled by the `--connect-retries' option). The default is 5
     attempts.

     This option was added in MySQL Cluster NDB 7.2.9.

*Note `ndbd': mysql-cluster-programs-ndbd. generates a set of log files
which are placed in the directory specified by `DataDir' in the
`config.ini' configuration file.

These log files are listed below.  NODE_ID is the node's unique
identifier. Note that NODE_ID represents the node's unique identifier.
For example, `ndb_2_error.log' is the error log generated by the data
node whose node ID is `2'.

   * `ndb_NODE_ID_error.log' is a file containing records of all
     crashes which the referenced *Note `ndbd':
     mysql-cluster-programs-ndbd. process has encountered.  Each record
     in this file contains a brief error string and a reference to a
     trace file for this crash. A typical entry in this file might
     appear as shown here:

          Date/Time: Saturday 30 July 2004 - 00:20:01
          Type of error: error
          Message: Internal program error (failed ndbrequire)
          Fault ID: 2341
          Problem data: DbtupFixAlloc.cpp
          Object of reference: DBTUP (Line: 173)
          ProgramName: NDB Kernel
          ProcessID: 14909
          TraceFile: ndb_2_trace.log.2
          ***EOM***

     Listings of possible *Note `ndbd': mysql-cluster-programs-ndbd.
     exit codes and messages generated when a data node process shuts
     down prematurely can be found in `ndbd' Error Messages
     (http://dev.mysql.com/doc/ndbapi/en/ndbd-error-messages.html).

     *Important*:

     _The last entry in the error log file is not necessarily the
     newest one_ (nor is it likely to be). Entries in the error log are
     _not_ listed in chronological order; rather, they correspond to
     the order of the trace files as determined in the
     `ndb_NODE_ID_trace.log.next' file (see below). Error log entries
     are thus overwritten in a cyclical and not sequential fashion.

   * `ndb_NODE_ID_trace.log.TRACE_ID' is a trace file describing
     exactly what happened just before the error occurred. This
     information is useful for analysis by the MySQL Cluster
     development team.

     It is possible to configure the number of these trace files that
     will be created before old files are overwritten.  TRACE_ID is a
     number which is incremented for each successive trace file.

   * `ndb_NODE_ID_trace.log.next' is the file that keeps track of the
     next trace file number to be assigned.

   * `ndb_NODE_ID_out.log' is a file containing any data output by the
     *Note `ndbd': mysql-cluster-programs-ndbd. process. This file is
     created only if *Note `ndbd': mysql-cluster-programs-ndbd. is
     started as a daemon, which is the default behavior.

   * `ndb_NODE_ID.pid' is a file containing the process ID of the *Note
     `ndbd': mysql-cluster-programs-ndbd. process when started as a
     daemon. It also functions as a lock file to avoid the starting of
     nodes with the same identifier.

   * `ndb_NODE_ID_signal.log' is a file used only in debug versions of
     *Note `ndbd': mysql-cluster-programs-ndbd, where it is possible to
     trace all incoming, outgoing, and internal messages with their
     data in the *Note `ndbd': mysql-cluster-programs-ndbd. process.

It is recommended not to use a directory mounted through NFS because in
some environments this can cause problems whereby the lock on the
`.pid' file remains in effect even after the process has terminated.

To start *Note `ndbd': mysql-cluster-programs-ndbd, it may also be
necessary to specify the host name of the management server and the
port on which it is listening. Optionally, one may also specify the node
ID that the process is to use.

     shell> ndbd --connect-string="nodeid=2;host=ndb_mgmd.mysql.com:1186"

See *Note mysql-cluster-connection-strings::, for additional
information about this issue.  *Note mysql-cluster-programs-ndbd::,
describes other options for *Note `ndbd': mysql-cluster-programs-ndbd.

When *Note `ndbd': mysql-cluster-programs-ndbd. starts, it actually
initiates two processes. The first of these is called the `angel
process'; its only job is to discover when the execution process has
been completed, and then to restart the *Note `ndbd':
mysql-cluster-programs-ndbd. process if it is configured to do so.
Thus, if you attempt to kill *Note `ndbd': mysql-cluster-programs-ndbd.
using the Unix *Note `kill': kill. command, it is necessary to kill
both processes, beginning with the angel process. The preferred method
of terminating an *Note `ndbd': mysql-cluster-programs-ndbd. process is
to use the management client and stop the process from there.

The execution process uses one thread for reading, writing, and
scanning data, as well as all other activities. This thread is
implemented asynchronously so that it can easily handle thousands of
concurrent actions. In addition, a watch-dog thread supervises the
execution thread to make sure that it does not hang in an endless loop.
A pool of threads handles file I/O, with each thread able to handle one
open file. Threads can also be used for transporter connections by the
transporters in the *Note `ndbd': mysql-cluster-programs-ndbd. process.
In a multi-processor system performing a large number of operations
(including updates), the *Note `ndbd': mysql-cluster-programs-ndbd.
process can consume up to 2 CPUs if permitted to do so.

For a machine with many CPUs it is possible to use several *Note
`ndbd': mysql-cluster-programs-ndbd. processes which belong to
different node groups; however, such a configuration is still considered
experimental and is not supported for MySQL 5.5 in a production
setting. See *Note mysql-cluster-limitations::.


File: manual.info,  Node: mysql-cluster-programs-ndbinfo-select-all,  Next: mysql-cluster-programs-ndbmtd,  Prev: mysql-cluster-programs-ndbd,  Up: mysql-cluster-programs

17.4.2 `ndbinfo_select_all' -- Select From ndbinfo Tables
---------------------------------------------------------

*Note `ndbinfo_select_all': mysql-cluster-programs-ndbinfo-select-all.
is a client program that selects all rows and columns from one or more
tables in the *Note `ndbinfo': mysql-cluster-ndbinfo. database. It is
included with the MySQL Cluster distribution beginning with MySQL
Cluster NDB 7.2.2.

Not all `ndbinfo' tables can be accessed by this program.
`ndbinfo_select_all' can access the *Note `counters':
mysql-cluster-ndbinfo-counters, *Note `diskpagebuffer':
mysql-cluster-ndbinfo-diskpagebuffer, *Note `logbuffers':
mysql-cluster-ndbinfo-logbuffers, *Note `logspaces':
mysql-cluster-ndbinfo-logspaces, *Note `nodes':
mysql-cluster-ndbinfo-nodes, *Note `resources':
mysql-cluster-ndbinfo-resources, `threadblocks', `threadstat',

and *Note `transporters': mysql-cluster-ndbinfo-transporters. tables.

To select from one or more `ndbinfo' tables using *Note
`ndbinfo_select_all': mysql-cluster-programs-ndbinfo-select-all, it is
necessary to supply the names of the tables when invoking the program as
shown here:

     shell> ndbinfo_select_all TABLE_NAME1  [TABLE_NAME2] [...]

For example:

     shell> ndbinfo_select_all logbuffers logspaces
     == logbuffers ==
     node_id log_type        log_id  log_part        total   used    high
     5       0       0       0       33554432        262144  0
     6       0       0       0       33554432        262144  0
     7       0       0       0       33554432        262144  0
     8       0       0       0       33554432        262144  0
     == logspaces ==
     node_id log_type        log_id  log_part        total   used    high
     5       0       0       0       268435456       0       0
     5       0       0       1       268435456       0       0
     5       0       0       2       268435456       0       0
     5       0       0       3       268435456       0       0
     6       0       0       0       268435456       0       0
     6       0       0       1       268435456       0       0
     6       0       0       2       268435456       0       0
     6       0       0       3       268435456       0       0
     7       0       0       0       268435456       0       0
     7       0       0       1       268435456       0       0
     7       0       0       2       268435456       0       0
     7       0       0       3       268435456       0       0
     8       0       0       0       268435456       0       0
     8       0       0       1       268435456       0       0
     8       0       0       2       268435456       0       0
     8       0       0       3       268435456       0       0
     shell>

The following table includes options that are specific to *Note
`ndbinfo_select_all': mysql-cluster-programs-ndbinfo-select-all.
Additional descriptions follow the table. For options common to most
MySQL Cluster programs (including *Note `ndbinfo_select_all':
mysql-cluster-programs-ndbinfo-select-all.), see *Note
mysql-cluster-program-options-common::.

*`ndbinfo_select_all' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note
`ndbinfo_select_all': mysql-cluster-programs-ndbinfo-select-all. program

Format                           Description               Added /
                                                           Removed
` --delay=# '                    Set the delay in seconds  All MySQL 5.5
                                 between loops. Default    based releases
                                 is 5.                     
`--loops=#',                     Set the number of times   All MySQL 5.5
                                 to perform the select.    based releases
` -l '                           Default is 1.             
`--database=db_name',            Name of the database      All MySQL 5.5
                                 where the table located.  based releases
` -d '                                                     
`--parallelism=#',               Set the degree of         All MySQL 5.5
                                 parallelism.              based releases
` -p '                                                     

   *  `--delay=`seconds''

     Options for delay

     *Command-Line        `--delay=#'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `5'             
     *Range*              `0 ..           
                          MAX_INT'        

     This option sets the number of seconds to wait between executing
     loops. Has no effect if `--loops' is set to 0 or 1.

   *  `--loops=`number'', `-l NUMBER'

     Options for loops

     *Command-Line        `--loops=#'        
     Format*                              
                          `-l'            
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1'             
     *Range*              `0 ..           
                          MAX_INT'        

     This option sets the number of times to execute the select.  Use
     `--delay' to set the time between loops.


File: manual.info,  Node: mysql-cluster-programs-ndbmtd,  Next: mysql-cluster-programs-ndb-mgmd,  Prev: mysql-cluster-programs-ndbinfo-select-all,  Up: mysql-cluster-programs

17.4.3 `ndbmtd' -- The MySQL Cluster Data Node Daemon (Multi-Threaded)
----------------------------------------------------------------------

*Note `ndbmtd': mysql-cluster-programs-ndbmtd. is a multi-threaded
version of *Note `ndbd': mysql-cluster-programs-ndbd, the process that
is used to handle all the data in tables using the *Note `NDBCLUSTER':
mysql-cluster. storage engine.  *Note `ndbmtd':
mysql-cluster-programs-ndbmtd. is intended for use on host computers
having multiple CPU cores. Except where otherwise noted, *Note
`ndbmtd': mysql-cluster-programs-ndbmtd. functions in the same way as
*Note `ndbd': mysql-cluster-programs-ndbd.; therefore, in this section,
we concentrate on the ways in which *Note `ndbmtd':
mysql-cluster-programs-ndbmtd.  differs from *Note `ndbd':
mysql-cluster-programs-ndbd, and you should consult *Note
mysql-cluster-programs-ndbd::, for additional information about running
MySQL Cluster data nodes that apply to both the single-threaded and
multi-threaded versions of the data node process.

Command-line options and configuration parameters used with *Note
`ndbd': mysql-cluster-programs-ndbd. also apply to *Note `ndbmtd':
mysql-cluster-programs-ndbmtd.  For more information about these
options and parameters, see *Note mysql-cluster-programs-ndbd::, and
*Note mysql-cluster-ndbd-definition::, respectively.

*Note `ndbmtd': mysql-cluster-programs-ndbmtd. is also file
system-compatible with *Note `ndbd': mysql-cluster-programs-ndbd. In
other words, a data node running *Note `ndbd':
mysql-cluster-programs-ndbd. can be stopped, the binary replaced with
*Note `ndbmtd': mysql-cluster-programs-ndbmtd, and then restarted
without any loss of data. (However, when doing this, you must make sure
that `MaxNoOfExecutionThreads' is set to an apppriate value before
restarting the node if you wish for *Note `ndbmtd':
mysql-cluster-programs-ndbmtd. to run in multi-threaded fashion.)
Similarly, an *Note `ndbmtd': mysql-cluster-programs-ndbmtd. binary can
be replaced with *Note `ndbd': mysql-cluster-programs-ndbd. simply by
stopping the node and then starting *Note `ndbd':
mysql-cluster-programs-ndbd. in place of the multi-threaded binary. It
is not necessary when switching between the two to start the data node
binary using `--initial'.

Using *Note `ndbmtd': mysql-cluster-programs-ndbmtd. differs from using
*Note `ndbd': mysql-cluster-programs-ndbd. in two key respects:

  1. Because *Note `ndbmtd': mysql-cluster-programs-ndbmtd. runs by
     default in single-threaded mode (that is, it behaves like *Note
     `ndbd': mysql-cluster-programs-ndbd.), you must configure it to use
     multiple threads. This can be done by setting an appropriate value
     in the `config.ini' file for the `MaxNoOfExecutionThreads'
     configuration parameter or (in MySQL Cluster NDB 7.2.3 and later)
     the `ThreadConfig' configuration parameter. Using
     `MaxNoOfExecutionThreads' is simpler, but `ThreadConfig' offers
     more flexibility. For more information about these configuration
     parameters and their use, see *Note
     mysql-cluster-ndbd-definition-ndbmtd-parameters::.

  2. Trace files are generated by critical errors in *Note `ndbmtd':
     mysql-cluster-programs-ndbmtd. processes in a somewhat different
     fashion from how these are generated by *Note `ndbd':
     mysql-cluster-programs-ndbd. failures. These differences are
     discussed in more detail in the next few paragraphs.

Like *Note `ndbd': mysql-cluster-programs-ndbd, *Note `ndbmtd':
mysql-cluster-programs-ndbmtd.  generates a set of log files which are
placed in the directory specified by `DataDir' in the `config.ini'
configuration file. Except for trace files, these are generated in the
same way and have the same names as those generated by *Note `ndbd':
mysql-cluster-programs-ndbd.

In the event of a critical error, *Note `ndbmtd':
mysql-cluster-programs-ndbmtd.  generates trace files describing what
happened just prior to the error' occurrence. These files, which can be
found in the data node's `DataDir', are useful for analysis of problems
by the MySQL Cluster Development and Support teams. One trace file is
generated for each *Note `ndbmtd': mysql-cluster-programs-ndbmtd.
thread. The names of these files have the following pattern:

               `ndb_NODE_ID_trace.log.TRACE_ID_tTHREAD_ID',

In this pattern, NODE_ID stands for the data node's unique node ID in
the cluster, TRACE_ID is a trace sequence number, and THREAD_ID is the
thread ID. For example, in the event of the failure of an *Note
`ndbmtd': mysql-cluster-programs-ndbmtd. process running as a MySQL
Cluster data node having the node ID 3 and with
`MaxNoOfExecutionThreads' equal to 4, four trace files are generated in
the data node's data directory. If the is the first time this node has
failed, then these files are named `ndb_3_trace.log.1_t1',
`ndb_3_trace.log.1_t2', `ndb_3_trace.log.1_t3', and
`ndb_3_trace.log.1_t4'. Internally, these trace files follow the same
format as *Note `ndbd': mysql-cluster-programs-ndbd.  trace files.

The *Note `ndbd': mysql-cluster-programs-ndbd. exit codes and messages
that are generated when a data node process shuts down prematurely are
also used by *Note `ndbmtd': mysql-cluster-programs-ndbmtd. See `ndbd'
Error Messages
(http://dev.mysql.com/doc/ndbapi/en/ndbd-error-messages.html), for a
listing of these.

*Note*:

It is possible to use *Note `ndbd': mysql-cluster-programs-ndbd. and
*Note `ndbmtd': mysql-cluster-programs-ndbmtd. concurrently on
different data nodes in the same MySQL Cluster. However, such
configurations have not been tested extensively; thus, we cannot
recommend doing so in a production setting at this time.


File: manual.info,  Node: mysql-cluster-programs-ndb-mgmd,  Next: mysql-cluster-programs-ndb-mgm,  Prev: mysql-cluster-programs-ndbmtd,  Up: mysql-cluster-programs

17.4.4 `ndb_mgmd' -- The MySQL Cluster Management Server Daemon
---------------------------------------------------------------

The management server is the process that reads the cluster
configuration file and distributes this information to all nodes in the
cluster that request it. It also maintains a log of cluster activities.
Management clients can connect to the management server and check the
cluster's status.

The following table includes options that are specific to the MySQL
Cluster management server program *Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd. Additional descriptions follow the
table. For options common to most MySQL Cluster programs (including
*Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd.), see *Note
mysql-cluster-program-options-common::.

*`ndb_mgmd' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd. program

Format                           Description               Added /
                                                           Removed
`--config-file=file',            Specify the cluster       All MySQL 5.5
                                 configuration file; in    based releases
`-f',                            NDB-6.4.0 and later,      
                                 needs -reload or          
` -c '                           -initial to override      
                                 configuration cache if    
                                 present                   
` --configdir=directory '        Specify the cluster       All MySQL 5.5
                                 management server's       based releases
                                 configuration cache       
                                 directory                 
` --bind-address=ip_address '    Local bind address        All MySQL 5.5
                                                           based releases
`--print-full-config',           Print full configuration  All MySQL 5.5
                                 and exit                  based releases
` -P '                                                     
`--daemon',                      Run ndb_mgmd in daemon    All MySQL 5.5
                                 mode (default)            based releases
` -d '                                                     
` --nodaemon '                   Do not run ndb_mgmd as a  All MySQL 5.5
                                 daemon                    based releases
` --interactive '                Run ndb_mgmd in           All MySQL 5.5
                                 interactive mode (not     based releases
                                 officially supported in   
                                 production; for testing   
                                 purposes only)            
` --log-name=name '              A name to use when        All MySQL 5.5
                                 writing messages          based releases
                                 applying to this node in  
                                 the cluster log.          
` --no-nodeid-checks '           Do not provide any node   All MySQL 5.5
                                 id checks                 based releases
` --mycnf '                      Read cluster              All MySQL 5.5
                                 configuration data from   based releases
                                 the my.cnf file           
` --reload '                     Causes the management     All MySQL 5.5
                                 server to compare the     based releases
                                 configuration file with   
                                 its configuration cache   
` --initial '                    Causes the management     All MySQL 5.5
                                 server reload its         based releases
                                 configuration data from   
                                 the configuration file,   
                                 bypassing the             
                                 configuration cache       
` --nowait-nodes=list '          Do not wait for these     All MySQL 5.5
                                 management nodes when     based releases
                                 starting this management  
                                 server. Also requires     
                                 -ndb-nodeid to be used.   
` --config-cache=value '         Enable the management     All MySQL 5.5
                                 server configuration      based releases
                                 cache; ON by default.     
` --install[=name] '             Used to install the       All MySQL 5.5
                                 management server         based releases
                                 process as a Windows      
                                 service. Does not apply   
                                 on non-Windows platforms. 
` --remove[=name] '              Used to remove a          All MySQL 5.5
                                 management server         based releases
                                 process that was          
                                 previously installed as   
                                 a Windows service,        
                                 optionally specifying     
                                 the name of the service   
                                 to be removed. Does not   
                                 apply on non-Windows      
                                 platforms.                

   *  `--bind-address=HOST[:PORT]'

     Options for bind-address

     *Command-Line        `--bind-address=ip_address'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `[none]'        

     When specified, this option limits management server connections
     by management clients to clients at the specified host name or IP
     address (and possibly port, if this is also specified). In such
     cases, a management client attempting to connect to the management
     server from any other address fails with the error `Unable to
     setup port: HOST:PORT!'

     If the PORT is not specified, the management client attempts to
     use port 1186.

   *  `--no-nodeid-checks'

     Options for no-nodeid-checks

     *Command-Line        `--no-nodeid-checks'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Do not perform any checks of node IDs.

   *  `--configdir=PATH'

     Options for configdir

     *Command-Line        `--configdir=directory'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           
     *Default*            `$INSTALLDIR/mysql-cluster'        

     Specifies the cluster management server's configuration cache
     directory. `--config-dir' is an alias for this option.

   *  This option, whose default value is `1' (or `TRUE', or `ON'), can
     be used to disable the management server's configuration cache, so
     that it reads its configuration from `config.ini' every time it
     starts (see *Note mysql-cluster-config-file::). You can do this by
     starting the *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd.
     process with any one of the following options:

        * `--config-cache=0'

        * `--config-cache=FALSE'

        * `--config-cache=OFF'

        *  `--skip-config-cache'

     Using one of the options just listed is effective only if the
     management server has no stored configuration at the time it is
     started. If the management server finds any configuration cache
     files, then the `--config-cache' option or the
     `--skip-config-cache' option is ignored.  Therefore, to disable
     configuration caching, the option should be used the _first_ time
     that the management server is started. Otherwise--that is, if you
     wish to disable configuration caching for a management server that
     has _already_ created a configuration cache--you must stop the
     management server, delete any existing configuration cache files
     manually, then restart the management server with
     `--skip-config-cache' (or with `--config-cache' set equal to 0,
     `OFF', or `FALSE').

     Configuration cache files are normally created in a directory
     named `mysql-cluster' under the installation directory (unless
     this location has been overridden using the `--configdir' option).
     Each time the management server updates its configuration data, it
     writes a new cache file. The files are named sequentially in order
     of creation using the following format:

          ndb_NODE-ID_config.bin.SEQ-NUMBER

     NODE-ID is the management server's node ID; SEQ-NUMBER is a
     sequence number, beginning with 1. For example, if the management
     server's node ID is 5, then the first three configuration cache
     files would, when they are created, be named `ndb_5_config.bin.1',
     `ndb_5_config.bin.2', and `ndb_5_config.bin.3'.

     If your intent is to purge or reload the configuration cache
     without actually disabling caching, you should start *Note
     `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. with one of the
     options `--reload' or `--initial' instead of `--skip-config-cache'.

     To re-enable the configuration cache, simply restart the
     management server, but without the `--config-cache' or
     `--skip-config-cache' option that was used previously to disable
     the configuration cache.

     Beginning with MySQL Cluster NDB 7.2.5, *Note `ndb_mgmd':
     mysql-cluster-programs-ndb-mgmd. no longer checks for the
     configuration directory (`--configdir') or attempts to create one
     when `--skip-config-cache' is used. (Bug #13428853)

   *  `--config-file=FILENAME', `-f FILENAME'

     Options for config-file

     *Command-Line        `--config-file=file'        
     Format*                              
                          `-f'            
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           
     *Default*            `./config.ini'        
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           
     *Default*            `[none]'        

     Instructs the management server as to which file it should use for
     its configuration file. By default, the management server looks
     for a file named `config.ini' in the same directory as the *Note
     `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. executable; otherwise
     the file name and location must be specified explicitly.

     This option has no default value, and is ignored unless the
     management server is forced to read the configuration file, either
     because *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. was
     started with the `--reload' or `--initial' option, or because the
     management server could not find any configuration cache. This
     option is also read if *Note `ndb_mgmd':
     mysql-cluster-programs-ndb-mgmd. was started with
     `--config-cache=OFF'. See *Note mysql-cluster-config-file::, for
     more information.

     Formerly, using this option together with `--initial' caused
     removal of the configuration cache even if the file was not found.
     This issue was resolved in MySQL Cluster NDB 7.2.13. (Bug #1299289)

   *  `--mycnf'

     Options for mycnf

     *Command-Line        `--mycnf'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Read configuration data from the `my.cnf' file.

   *  `--daemon', `-d'

     Options for daemon

     *Command-Line        `--daemon'        
     Format*                              
                          `-d'            
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `TRUE'          

     Instructs *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. to
     start as a daemon process. This is the default behavior.

     This option has no effect when running *Note `ndb_mgmd':
     mysql-cluster-programs-ndb-mgmd. on Windows platforms.

   *  `--interactive'

     Options for interactive

     *Command-Line        `--interactive'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Starts *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. in
     interactive mode; that is, an *Note `ndb_mgm':
     mysql-cluster-programs-ndb-mgm. client session is started as soon
     as the management server is running. This option does not start
     any other MySQL Cluster nodes.

   *  `--initial'

     Options for initial

     *Command-Line        `--initial'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Configuration data is cached internally, rather than being read
     from the cluster global configuration file each time the
     management server is started (see *Note
     mysql-cluster-config-file::). Using the `--initial' option
     overrides this behavior, by forcing the management server to
     delete any existing cache files, and then to re-read the
     configuration data from the cluster configuration file and to
     build a new cache.

     This differs in two ways from the `--reload' option. First,
     `--reload' forces the server to check the configuration file
     against the cache and reload its data only if the contents of the
     file are different from the cache. Second, `--reload' does not
     delete any existing cache files.

     If *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. is invoked
     with `--initial' but cannot find a global configuration file, the
     management server cannot start.

     When a management server starts, it checks for another management
     server in the same MySQL Cluster and tries to use the other
     management server's configuration data; *Note `ndb_mgmd':
     mysql-cluster-programs-ndb-mgmd. ignores `--initial' unless it is
     the only management server running. This behavior also has
     implications when performing a rolling restart of a MySQL Cluster
     with multiple management nodes. See *Note
     mysql-cluster-rolling-restart::, for more information.

     Formerly, using this option together with the `--config-file'
     option caused removal of the configuration cache even if the file
     was not found. Starting with MySQL Cluster NDB 7.2.13, the cache is
     cleared in such cases only if the configuration file is actually
     found. (Bug #1299289)

   *  `--log-name=NAME'

     Options for log-name

     *Command-Line        `--log-name=name'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `MgmtSrvr'        

     Provides a name to be used for this node in the cluster log.

   *  `--nodaemon'

     Options for nodaemon

     *Command-Line        `--nodaemon'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Instructs *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. not
     to start as a daemon process.

     The default behavior for *Note `ndb_mgmd':
     mysql-cluster-programs-ndb-mgmd. on Windows is to run in the
     foreground, making this option unnecessary on Windows platforms.

   *  `--print-full-config', `-P'

     Options for print-full-config

     *Command-Line        `--print-full-config'        
     Format*                              
                          `-P'            
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Shows extended information regarding the configuration of the
     cluster. With this option on the command line the *Note
     `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. process prints
     information about the cluster setup including an extensive list of
     the cluster configuration sections as well as parameters and their
     values. Normally used together with the `--config-file' (`-f')
     option.

   *  `--reload'

     Options for reload

     *Command-Line        `--reload'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     In MySQL Cluster NDB 7.2, configuration data is stored internally
     rather than being read from the cluster global configuration file
     each time the management server is started (see *Note
     mysql-cluster-config-file::).  Using this option forces the
     management server to check its internal data store against the
     cluster configuration file and to reload the configuration if it
     finds that the configuration file does not match the cache.
     Existing configuration cache files are preserved, but not used.

     This differs in two ways from the `--initial' option. First,
     `--initial' causes all cache files to be deleted. Second,
     `--initial' forces the management server to re-read the global
     configuration file and construct a new cache.

     If the management server cannot find a global configuration file,
     then the `--reload' option is ignored.

     When a management server starts, it checks for another management
     server in the same MySQL Cluster and tries to use the other
     management server's configuration data; *Note `ndb_mgmd':
     mysql-cluster-programs-ndb-mgmd. ignores `--reload' unless it is
     the only management server running. This behavior also has
     implications when performing a rolling restart of a MySQL Cluster
     with multiple management nodes. See *Note
     mysql-cluster-rolling-restart::, for more information.

   *  `--nowait-nodes'

     Options for nowait-nodes

     *Command-Line        `--nowait-nodes=list'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `'              
     *Range*              `1 ..           
                          255'            

     When starting a MySQL Cluster is configured with two management
     nodes, each management server normally checks to see whether the
     other *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. is also
     operational and whether the other management server's
     configuration is identical to its own. However, it is sometimes
     desirable to start the cluster with only one management node (and
     perhaps to allow the other *Note `ndb_mgmd':
     mysql-cluster-programs-ndb-mgmd. to be started later). This option
     causes the management node to bypass any checks for any other
     management nodes whose node IDs are passed to this option,
     permitting the cluster to start as though configured to use only
     the management node that was started.

     For purposes of illustration, consider the following portion of a
     `config.ini' file (where we have omitted most of the configuration
     parameters that are not relevant to this example):

          [ndbd]
          NodeId = 1
          HostName = 192.168.0.101

          [ndbd]
          NodeId = 2
          HostName = 192.168.0.102

          [ndbd]
          NodeId = 3
          HostName = 192.168.0.103

          [ndbd]
          NodeId = 4
          HostName = 192.168.0.104

          [ndb_mgmd]
          NodeId = 10
          HostName = 192.168.0.150

          [ndb_mgmd]
          NodeId = 11
          HostName = 192.168.0.151

          [api]
          NodeId = 20
          HostName = 192.168.0.200

          [api]
          NodeId = 21
          HostName = 192.168.0.201

     Assume that you wish to start this cluster using only the
     management server having node ID `10' and running on the host
     having the IP address 192.168.0.150.  (Suppose, for example, that
     the host computer on which you intend to the other management
     server is temporarily unavailable due to a hardware failure, and
     you are waiting for it to be repaired.) To start the cluster in
     this way, use a command line on the machine at 192.168.0.150 to
     enter the following command:

          shell> ndb_mgmd --ndb-nodeid=10 --nowait-nodes=11

     As shown in the preceding example, when using `--nowait-nodes',
     you must also use the `--ndb-nodeid' option to specify the node ID
     of this *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. process.

     You can then start each of the cluster's data nodes in the usual
     way. If you wish to start and use the second management server in
     addition to the first management server at a later time without
     restarting the data nodes, you must start each data node with a
     connection string that references both management servers, like
     this:

          shell> ndbd -c 192.168.0.150,192.168.0.151

     The same is true with regard to the connection string used with
     any *Note `mysqld': mysqld. processes that you wish to start as
     MySQL Cluster SQL nodes connected to this cluster. See *Note
     mysql-cluster-connection-strings::, for more information.

     When used with *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd,
     this option affects the behavior of the management node with
     regard to other management nodes only. Do not confuse it with the
     `--nowait-nodes' option used with *Note `ndbd':
     mysql-cluster-programs-ndbd. or *Note `ndbmtd':
     mysql-cluster-programs-ndbmtd. to permit a cluster to start with
     fewer than its full complement of data nodes; when used with data
     nodes, this option affects their behavior only with regard to
     other data nodes.

     Multiple management node IDs may be passed to this option as a
     comma-separated list. Each node ID must be no less than 1 and no
     greater than 255. In practice, it is quite rare to use more than
     two management servers for the same MySQL Cluster (or to have any
     need for doing so); in most cases you need to pass to this option
     only the single node ID for the one management server that you do
     not wish to use when starting the cluster.

     *Note*:

     When you later start the `missing' management server, its
     configuration must match that of the management server that is
     already in use by the cluster.  Otherwise, it fails the
     configuration check performed by the existing management server,
     and does not start.

It is not strictly necessary to specify a connection string when
starting the management server. However, if you are using more than one
management server, a connection string should be provided and each node
in the cluster should specify its node ID explicitly.

See *Note mysql-cluster-connection-strings::, for information about
using connection strings.  *Note mysql-cluster-programs-ndb-mgmd::,
describes other options for *Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd.

The following files are created or used by *Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd. in its starting directory, and are
placed in the `DataDir' as specified in the `config.ini' configuration
file. In the list that follows, NODE_ID is the unique node identifier.

   * `config.ini' is the configuration file for the cluster as a whole.
     This file is created by the user and read by the management server.
     *Note mysql-cluster-configuration::, discusses how to set up this
     file.

   * `ndb_NODE_ID_cluster.log' is the cluster events log file. Examples
     of such events include checkpoint startup and completion, node
     startup events, node failures, and levels of memory usage. A
     complete listing of cluster events with descriptions may be found
     in *Note mysql-cluster-management::.

     When the size of the cluster log reaches one million bytes, the
     file is renamed to `ndb_NODE_ID_cluster.log.SEQ_ID', where SEQ_ID
     is the sequence number of the cluster log file. (For example: If
     files with the sequence numbers 1, 2, and 3 already exist, the
     next log file is named using the number `4'.)

   * `ndb_NODE_ID_out.log' is the file used for `stdout' and `stderr'
     when running the management server as a daemon.

   * `ndb_NODE_ID.pid' is the process ID file used when running the
     management server as a daemon.

   *  `--install[=NAME]'

     Options for install

     *Command-Line        `--install[=name]'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `ndb_mgmd'        

     Causes *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. to be
     installed as a Windows service. Optionally, you can specify a name
     for the service; if not set, the service name defaults to
     `ndb_mgmd'. Although it is preferable to specify other *Note
     `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. program options in a
     `my.ini' or `my.cnf' configuration file, it is possible to use
     them together with `--install'. However, in such cases, the
     `--install' option must be specified first, before any other
     options are given, for the Windows service installation to succeed.

     It is generally not advisable to use this option together with the
     `--initial' option, since this causes the configuration cache to
     be wiped and rebuilt every time the service is stopped and
     started. Care should also be taken if you intend to use any other
     *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. options that
     affect the starting of the management server, and you should make
     absolutely certain you fully understand and allow for any possible
     consequences of doing so.

     The `--install' option has no effect on non-Windows platforms.

   *  `--remove[=NAME]'

     Options for remove

     *Command-Line        `--remove[=name]'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `ndb_mgmd'        

     Causes an *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd.
     process that was previously installed as a Windows service to be
     removed.  Optionally, you can specify a name for the service to be
     uninstalled; if not set, the service name defaults to `ndb_mgmd'.

     The `--remove' option has no effect on non-Windows platforms.


File: manual.info,  Node: mysql-cluster-programs-ndb-mgm,  Next: mysql-cluster-programs-ndb-blob-tool,  Prev: mysql-cluster-programs-ndb-mgmd,  Up: mysql-cluster-programs

17.4.5 `ndb_mgm' -- The MySQL Cluster Management Client
-------------------------------------------------------

The *Note `ndb_mgm': mysql-cluster-programs-ndb-mgm. management client
process is actually not needed to run the cluster. Its value lies in
providing a set of commands for checking the cluster's status, starting
backups, and performing other administrative functions.  The management
client accesses the management server using a C API. Advanced users can
also employ this API for programming dedicated management processes to
perform tasks similar to those performed by *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm.

To start the management client, it is necessary to supply the host name
and port number of the management server:

     shell> ndb_mgm [HOST_NAME [PORT_NUM]]

For example:

     shell> ndb_mgm ndb_mgmd.mysql.com 1186

The default host name and port number are `localhost' and 1186,
respectively.

The following table includes options that are specific to the MySQL
Cluster management client program *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm. Additional descriptions follow the
table. For options common to most MySQL Cluster programs (including
*Note `ndb_mgm': mysql-cluster-programs-ndb-mgm.), see *Note
mysql-cluster-program-options-common::.

*`ndb_mgm' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm. program

Format                           Description               Added /
                                                           Removed
`--try-reconnect=#',             Specify number of tries   All MySQL 5.5
                                 for connecting to         based releases
` -t '                           ndb_mgmd (0 = infinite)   
`--execute=name',                Execute command and exit  All MySQL 5.5
                                                           based releases
` -e '                                                     

   *  `--execute=`command'', `-e `command''

     Options for execute

     *Command-Line        `--execute=name'        
     Format*                              
                          `-e'            

     This option can be used to send a command to the MySQL Cluster
     management client from the system shell. For example, either of
     the following is equivalent to executing `SHOW' in the management
     client:

          shell> ndb_mgm -e "SHOW"

          shell> ndb_mgm --execute="SHOW"

     This is analogous to how the `--execute' or `-e' option works with
     the *Note `mysql': mysql. command-line client. See *Note
     command-line-options::.

     *Note*:

     If the management client command to be passed using this option
     contains any space characters, then the command _must_ be enclosed
     in quotation marks.  Either single or double quotation marks may
     be used. If the management client command contains no space
     characters, the quotation marks are optional.

   *  `--try-reconnect=NUMBER'

     Options for try-reconnect

     *Command-Line        `--try-reconnect=#'        
     Format*                              
                          `-t'            
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `TRUE'          

     If the connection to the management server is broken, the node
     tries to reconnect to it every 5 seconds until it succeeds. By
     using this option, it is possible to limit the number of attempts
     to NUMBER before giving up and reporting an error instead.

Additional information about using *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm.  can be found in *Note
mysql-cluster-mgm-client-commands::.


File: manual.info,  Node: mysql-cluster-programs-ndb-blob-tool,  Next: mysql-cluster-programs-ndb-config,  Prev: mysql-cluster-programs-ndb-mgm,  Up: mysql-cluster-programs

17.4.6 `ndb_blob_tool' -- Check and Repair BLOB and TEXT columns of MySQL Cluster Tables
----------------------------------------------------------------------------------------

This tool can be used to check for and remove orphaned BLOB column
parts from *Note `NDB': mysql-cluster. tables, as well as to generate a
file listing any orphaned parts. It is sometimes useful in diagnosing
and repairing corrupted or damaged `NDB' tables containing *Note
`BLOB': blob. or *Note `TEXT': blob. columns.

The basic syntax for *Note `ndb_blob_tool':
mysql-cluster-programs-ndb-blob-tool. is shown here:

     ndb_blob_tool [OPTIONS] TABLE [COLUMN, ...]

Unless you use the `--help' option, you must specify an action to be
performed by including one or more of the options `--check-orphans',
`--delete-orphans', or `--dump-file'. These options cause *Note
`ndb_blob_tool': mysql-cluster-programs-ndb-blob-tool. to check for
orphaned BLOB parts, remove any orphaned BLOB parts, and generate a dump
file listing orphaned BLOB parts, respectively, and are described in
more detail later in this section.

You must also specify the name of a table when invoking *Note
`ndb_blob_tool': mysql-cluster-programs-ndb-blob-tool. In addition, you
can optionally follow the table name with the (comma-separated) names
of one or more *Note `BLOB': blob. or *Note `TEXT': blob. columns from
that table. If no columns are listed, the tool works on all of the
table's *Note `BLOB': blob. and *Note `TEXT': blob. columns. If you
need to specify a database, use the `--database' (`-d') option.

The `--verbose' option provides additional information in the output
about the tool's progress.

The following table includes options that are specific to *Note
`ndb_blob_tool': mysql-cluster-programs-ndb-blob-tool. Additional
descriptions follow the table. For options common to most MySQL Cluster
programs (including *Note `ndb_blob_tool':
mysql-cluster-programs-ndb-blob-tool.), see *Note
mysql-cluster-program-options-common::.

*`ndb_blob_tool' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note
`ndb_blob_tool': mysql-cluster-programs-ndb-blob-tool. program

Format                           Description               Added /
                                                           Removed
` --check-orphans '              Check for orphan blob     All MySQL 5.5
                                 parts                     based releases
`--database=db_name',            Database to find the      All MySQL 5.5
                                 table in.                 based releases
` -d '                                                     
` --delete-orphans '             Delete orphan blob parts  All MySQL 5.5
                                                           based releases
` --dump-file=file '             Write orphan keys to      All MySQL 5.5
                                 specified file            based releases
`--verbose',                     Verbose output            All MySQL 5.5
                                                           based releases
` -v '                                                     

   *  `--check-orphans'

     Options for check-orphans

     *Command-Line        `--check-orphans'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Check for orphaned BLOB parts in MySQL Cluster tables.

   *  `--database=DB_NAME', `-d'

     Options for database

     *Command-Line        `--database=db_name'        
     Format*                              
                          `-d'            
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `[none]'        

     Specify the database to find the table in.

   *  `--delete-orphans'

     Options for delete-orphans

     *Command-Line        `--delete-orphans'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Remove orphaned BLOB parts from MySQL Cluster tables.

   *  `--dump-file=FILE'

     Options for dump-file

     *Command-Line        `--dump-file=file'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           
     *Default*            `[none]'        

     Writes a list of orphaned BLOB column parts to FILE. The
     information written to the file includes the table key and BLOB
     part number for each orphaned BLOB part.

   *  `--verbose'

     Options for verbose

     *Command-Line        `--verbose'        
     Format*                              
                          `-v'            
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Provide extra information in the tool's output regarding its
     progress.

* Example *

First we create an `NDB' table in the `test' database, using the *Note
`CREATE TABLE': create-table. statement shown here:

     USE test;

     CREATE TABLE btest (
         c0 BIGINT UNSIGNED NOT NULL AUTO_INCREMENT PRIMARY KEY,
         c1 TEXT,
         c2 BLOB
     )   ENGINE=NDB;

Then we insert a few rows into this table, using a series of statements
similar to this one:

     INSERT INTO btest VALUES (NULL, 'x', REPEAT('x', 1000));

When run with `--check-orphans' against this table, *Note
`ndb_blob_tool': mysql-cluster-programs-ndb-blob-tool. generates the
following output:

     shell> ndb_blob_tool --check-orphans --verbose -d test btest
     connected
     processing 2 blobs
     processing blob #0 c1 NDB$BLOB_19_1
     NDB$BLOB_19_1: nextResult: res=1
     total parts: 0
     orphan parts: 0
     processing blob #1 c2 NDB$BLOB_19_2
     NDB$BLOB_19_2: nextResult: res=0
     NDB$BLOB_19_2: nextResult: res=0
     NDB$BLOB_19_2: nextResult: res=0
     NDB$BLOB_19_2: nextResult: res=0
     NDB$BLOB_19_2: nextResult: res=0
     NDB$BLOB_19_2: nextResult: res=0
     NDB$BLOB_19_2: nextResult: res=0
     NDB$BLOB_19_2: nextResult: res=0
     NDB$BLOB_19_2: nextResult: res=0
     NDB$BLOB_19_2: nextResult: res=0
     NDB$BLOB_19_2: nextResult: res=1
     total parts: 10
     orphan parts: 0
     disconnected

     NDBT_ProgramExit: 0 - OK

The tool reports that there are no `NDB' BLOB column parts associated
with column `c1', even though `c1' is a *Note `TEXT': blob. column.
This is due to the fact that, in an *Note `NDB': mysql-cluster. table,
only the first 256 bytes of a *Note `BLOB': blob. or *Note `TEXT':
blob. column value are stored inline, and only the excess, if any, is
stored separately; thus, if there are no values using more than 256
bytes in a given column of one of these types, no `BLOB' column parts
are created by `NDB' for this column. See *Note storage-requirements::,
for more information.


File: manual.info,  Node: mysql-cluster-programs-ndb-config,  Next: mysql-cluster-programs-ndb-cpcd,  Prev: mysql-cluster-programs-ndb-blob-tool,  Up: mysql-cluster-programs

17.4.7 `ndb_config' -- Extract MySQL Cluster Configuration Information
----------------------------------------------------------------------

This tool extracts current configuration information for data nodes,
SQL nodes, and API nodes from one of a number of sources: a MySQL
Cluster management node, or its `config.ini' or `my.cnf' file. By
default, the management node is the source for the configuration data;
to override the default, execute ndb_config with the `--config-file' or
`--mycnf' option. It is also possible to use a data node as the source
by specifying its node ID with `--config_from_node=NODE_ID'.

*Note `ndb_config': mysql-cluster-programs-ndb-config. can also provide
an offline dump of all configuration parameters which can be used,
along with their default, maximum, and minimum values and other
information. The dump can be produced in either text or XML format; for
more information, see the discussion of the `--configinfo' and `--xml'
options later in this section).

You can filter the results by section (`DB', `SYSTEM', or `CONNECTIONS')
using one of the options `--nodes', `--system', or `--connections'.

The following table includes options that are specific to *Note
`ndb_config': mysql-cluster-programs-ndb-config. Additional
descriptions follow the table. For options common to most MySQL Cluster
programs (including *Note `ndb_config':
mysql-cluster-programs-ndb-config.), see *Note
mysql-cluster-program-options-common::.

*`ndb_config' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note `ndb_config':
mysql-cluster-programs-ndb-config. program

Format                           Description               Added /
                                                           Removed
` --nodes '                      Print node information    All MySQL 5.5
                                 (DB section) only.        based releases
` --connections '                Print CONNECTIONS         All MySQL 5.5
                                 section information       based releases
                                 only. Cannot be used      
                                 with -nodes or -system    
                                 option.                   
`--query=string',                One or more query         All MySQL 5.5
                                 options (attributes)      based releases
` -q '                                                     
` --host=name '                  Specify host              All MySQL 5.5
                                                           based releases
` --type=name '                  Specify node type         All MySQL 5.5
                                                           based releases
`--nodeid',                      Get configuration of      All MySQL 5.5
                                 node with this ID         based releases
` --id '                                                   
`--fields=string',               Field separator           All MySQL 5.5
                                                           based releases
` -f '                                                     
`--rows=string',                 Row separator             All MySQL 5.5
                                                           based releases
` -r '                                                     
` --config-file=path '           Set the path to           All MySQL 5.5
                                 config.ini file           based releases
` --mycnf '                      Read configuration data   All MySQL 5.5
                                 from my.cnf file          based releases
` -c '                           Short form for            All MySQL 5.5
                                 -ndb-connectstring        based releases
` --configinfo '                 Dumps information about   All MySQL 5.5
                                 all NDB configuration     based releases
                                 parameters in text format 
                                 with default, maximum,    
                                 and minimum values. Use   
                                 with -xml to obtain XML   
                                 output.                   
` --configinfo --xml '           Use -xml with             All MySQL 5.5
                                 -configinfo to obtain a   based releases
                                 dump of all NDB           
                                 configuration parameters  
                                 in XML format with        
                                 default, maximum, and     
                                 minimum values.           
` --system '                     Print SYSTEM section      All MySQL 5.5
                                 information only. Cannot  based releases
                                 be used with -nodes or    
                                 -connections option.      
` --config_from_node=# '         Obtain configuration      All MySQL 5.5
                                 data from the node        based releases
                                 having this ID (must be   
                                 a data node).             

   *  `--usage', `--help', or `-?'

     Options for help

     *Command-Line        `--help'        
     Format*                              
                          `--usage'        
                          `-?'            

     Causes *Note `ndb_config': mysql-cluster-programs-ndb-config. to
     print a list of available options, and then exit.

   *  `--config_from_node=#'

     Options for config_from_node

     *Command-Line        `--config_from_node=#'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `none'          
     *Range*              `1 ..           
                          48'             

     Obtain the cluster's configuration data from the data node that
     has this ID.

     If the node having this ID is not a data node, *Note `ndb_config':
     mysql-cluster-programs-ndb-config. fails with an error. (To obtain
     configuration data from the management node instead, simply omit
     this option.)

   *  `--version', `-V'

     Options for version

     *Command-Line        `--version'        
     Format*                              
                          `-V'            

     Causes *Note `ndb_config': mysql-cluster-programs-ndb-config. to
     print a version information string, and then exit.

   *  `--ndb-connectstring=CONNECT_STRING', `-c CONNECT_STRING'

     Options for ndb-connectstring

     *Command-Line        `--ndb-connectstring=connectstring'        
     Format*                              
                          `--connect-string=connectstring'        
                          `-c'            
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `localhost:1186'        

     Specifies the connection string to use in connecting to the
     management server. The format for the connection string is the
     same as described in *Note mysql-cluster-connection-strings::, and
     defaults to `localhost:1186'.

   *  `--config-file=PATH-TO-FILE'

     Options for config-file

     *Command-Line        `--config-file=path'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           
     *Default*            `'              

     Gives the path to the management server's configuration file
     (`config.ini'). This may be a relative or absolute path. If the
     management node resides on a different host from the one on which
     *Note `ndb_config': mysql-cluster-programs-ndb-config. is invoked,
     then an absolute path must be used.

   *  `--mycnf'

     Options for mycnf

     *Command-Line        `--mycnf'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Read configuration data from the `my.cnf' file.

   *  `--query=QUERY-OPTIONS', `-q' QUERY-OPTIONS

     Options for query

     *Command-Line        `--query=string'        
     Format*                              
                          `-q'            
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `'              

     This is a comma-delimited list of _query options_--that is, a list
     of one or more node attributes to be returned. These include `id'
     (node ID), type (node type--that is, `ndbd', `mysqld', or
     `ndb_mgmd'), and any configuration parameters whose values are to
     be obtained.

     For example,

     `--query=id,type,indexmemory,datamemory' returns the node ID, node
     type, `DataMemory', and `IndexMemory' for each node.

     *Note*:

     If a given parameter is not applicable to a certain type of node,
     than an empty string is returned for the corresponding value. See
     the examples later in this section for more information.

   *  `--host=HOSTNAME'

     Options for host

     *Command-Line        `--host=name'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `'              

     Specifies the host name of the node for which configuration
     information is to be obtained.

     *Note*:

     While the hostname `localhost' usually resolves to the IP address
     `127.0.0.1', this may not necessarily be true for all operating
     platforms and configurations. This means that it is possible, when
     `localhost' is used in `config.ini', for *Note `ndb_config
     `--host=localhost'': mysql-cluster-programs-ndb-config. to fail if
     *Note `ndb_config': mysql-cluster-programs-ndb-config. is run on a
     different host where `localhost' resolves to a different address
     (for example, on some versions of SUSE Linux, this is
     `127.0.0.2'). In general, for best results, you should use numeric
     IP addresses for all MySQL Cluster configuration values relating
     to hosts, or verify that all MySQL Cluster hosts handle
     `localhost' in the same fashion.

   *  `--id=NODE_ID'

     `--nodeid=NODE_ID'

     Options for ndb-nodeid

     *Command-Line        `--ndb-nodeid=#'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             

     Either of these options can be used to specify the node ID of the
     node for which configuration information is to be obtained.
     `--nodeid' is the preferred form.

   *  `--nodes'

     Options for nodes

     *Command-Line        `--nodes'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Tells *Note `ndb_config': mysql-cluster-programs-ndb-config. to
     print information from parameters defined in `DB' sections only.
     This option cannot be used together with `--connections' or
     `--system'.

   *  `--connections'

     Options for connections

     *Command-Line        `--connections'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Tells *Note `ndb_config': mysql-cluster-programs-ndb-config. to
     print `CONNECTIONS' information only. This option cannot be used
     together with `--nodes' or `--system'.

   *  `--system'

     Options for system

     *Command-Line        `--system'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Tells *Note `ndb_config': mysql-cluster-programs-ndb-config. to
     print `SYSTEM' information only.

     This option cannot be used together with the `--nodes' or
     `--system' options.

   *  `--type=NODE_TYPE'

     Options for type

     *Command-Line        `--type=name'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `enumeration'        
     *Default*            `'              
     *Valid Values*       `ndbd'          
     `mysqld'                             
     `ndb_mgmd'                           

     Filters results so that only configuration values applying to
     nodes of the specified NODE_TYPE (`ndbd', `mysqld', or `ndb_mgmd')
     are returned.

   *  `--fields=DELIMITER', `-f' DELIMITER

     Options for fields

     *Command-Line        `--fields=string'        
     Format*                              
                          `-f'            
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `'              

     Specifies a DELIMITER string used to separate the fields in the
     result. The default is ``,'' (the comma character).

     *Note*:

     If the DELIMITER contains spaces or escapes (such as `\n' for the
     linefeed character), then it must be quoted.

   *  `--rows=SEPARATOR', `-r' SEPARATOR

     Options for rows

     *Command-Line        `--rows=string'        
     Format*                              
                          `-r'            
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `'              

     Specifies a SEPARATOR string used to separate the rows in the
     result. The default is a space character.

     *Note*:

     If the SEPARATOR contains spaces or escapes (such as `\n' for the
     linefeed character), then it must be quoted.

   *  `--configinfo'

     The `--configinfo' option causes *Note `ndb_config':
     mysql-cluster-programs-ndb-config. to dump a list of each MySQL
     Cluster configuration parameter supported by the MySQL Cluster
     distribution of which *Note `ndb_config':
     mysql-cluster-programs-ndb-config.  is a part, including the
     following information:

        * A brief description of each parameter's purpose, effects, and
          usage

        * The section of the `config.ini' file where the parameter may
          be used

        * The parameter's data type or unit of measurement

        * Where applicable, the parameter's default, minimum, and
          maximum values

        * A brief description of the parameter's purpose, effects, and
          usage

        * MySQL Cluster release version and build information

     By default, this output is in text format. Part of this output is
     shown here:

          shell> ndb_config --configinfo

          ****** SYSTEM ******

          Name (String)
          Name of system (NDB Cluster)
          MANDATORY

          PrimaryMGMNode (Non-negative Integer)
          Node id of Primary ndb_mgmd(MGM) node
          Default: 0 (Min: 0, Max: 4294967039)

          ConfigGenerationNumber (Non-negative Integer)
          Configuration generation number
          Default: 0 (Min: 0, Max: 4294967039)

          ****** DB ******

          MaxNoOfSubscriptions (Non-negative Integer)
          Max no of subscriptions (default 0 == MaxNoOfTables)
          Default: 0 (Min: 0, Max: 4294967039)

          MaxNoOfSubscribers (Non-negative Integer)
          Max no of subscribers (default 0 == 2 * MaxNoOfTables)
          Default: 0 (Min: 0, Max: 4294967039)

          ...

     `--configinfo' `--xml'

     Options for xml

     *Command-Line        `--configinfo        
     Format*              --xml'          
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `false'         

     You can obtain the output of *Note `ndb_config':
     mysql-cluster-programs-ndb-config.  `--configinfo' as XML by
     adding the `--xml' option. A portion of the resulting output is
     shown in this example:

          shell> ndb_config --configinfo --xml

          <configvariables protocolversion="1" ndbversionstring="5.5.33-ndb-7.2.14"
                              ndbversion="458758" ndbversionmajor="7" ndbversionminor="0"
                              ndbversionbuild="6">
            <section name="SYSTEM">
              <param name="Name" comment="Name of system (NDB Cluster)" type="string"
                        mandatory="true"/>
              <param name="PrimaryMGMNode" comment="Node id of Primary ndb_mgmd(MGM) node"
                        type="unsigned" default="0" min="0" max="4294967039"/>
              <param name="ConfigGenerationNumber" comment="Configuration generation number"
                        type="unsigned" default="0" min="0" max="4294967039"/>
            </section>
            <section name="NDBD">
              <param name="MaxNoOfSubscriptions"
                        comment="Max no of subscriptions (default 0 == MaxNoOfTables)"
                        type="unsigned" default="0" min="0" max="4294967039"/>
              <param name="MaxNoOfSubscribers"
                        comment="Max no of subscribers (default 0 == 2 * MaxNoOfTables)"
                        type="unsigned" default="0" min="0" max="4294967039"/>

              ...

            </section>

            ...

          </configvariables>

     *Note*:

     Normally, the XML output produced by *Note `ndb_config':
     mysql-cluster-programs-ndb-config.  `--configinfo' `--xml' is
     formatted using one line per element; we have added extra
     whitespace in the previous example, as well as the next one, for
     reasons of legibility. This should not make any difference to
     applications using this output, since most XML processors either
     ignore nonessential whitespace as a matter of course, or can be
     instructed to do so.

     The XML output also indicates when changing a given parameter
     requires that data nodes be restarted using the `--initial'
     option. This is shown by the presence of an `initial="true"'
     attribute in the corresponding `<param>' element. In addition, the
     restart type (`system' or `node') is also shown; if a given
     parameter requires a system restart, this is indicated by the
     presence of a `restart="system"' attribute in the corresponding
     `<param>' element. For example, changing the value set for the
     `Diskless' parameter requires a system initial restart, as shown
     here (with the `restart' and `initial' attributes highlighted for
     visibility):

          <param name="Diskless" comment="Run wo/ disk" type="bool" default="false"
                    _restart="system" initial="true"_/>

     Currently, no `initial' attribute is included in the XML output for
     `<param>' elements corresponding to parameters which do not
     require initial restarts; in other words, `initial="false"' is the
     default, and the value `false' should be assumed if the attribute
     is not present. Similarly, the default restart type is `node'
     (that is, an online or `rolling' restart of the cluster), but the
     `restart' attribute is included only if the restart type is
     `system' (meaning that all cluster nodes must be shut down at the
     same time, then restarted).

     *Important*:

     The `--xml' option can be used only with the `--configinfo'
     option. Using `--xml' without `--configinfo' fails with an error.

     Unlike the options used with this program to obtain current
     configuration data, `--configinfo' and `--xml' use information
     obtained from the MySQL Cluster sources when *Note `ndb_config':
     mysql-cluster-programs-ndb-config. was compiled. For this reason,
     no connection to a running MySQL Cluster or access to a
     `config.ini' or `my.cnf' file is required for these two options.

     Combining other *Note `ndb_config':
     mysql-cluster-programs-ndb-config. options (such as `--query' or
     `--type') with `--configinfo' or `--xml' is not supported.
     Currently, if you attempt to do so, the usual result is that all
     other options besides `--configinfo' or `--xml' are simply
     ignored. _However, this behavior is not guaranteed and is subject
     to change at any time_.  In addition, since *Note `ndb_config':
     mysql-cluster-programs-ndb-config, when used with the
     `--configinfo' option, does not access the MySQL Cluster or read
     any files, trying to specify additional options such as
     `--ndb-connectstring' or `--config-file' with `--configinfo'
     serves no purpose.

* Examples *

  1. To obtain the node ID and type of each node in the cluster:

          shell> ./ndb_config --query=id,type --fields=':' --rows='\n'
          1:ndbd
          2:ndbd
          3:ndbd
          4:ndbd
          5:ndb_mgmd
          6:mysqld
          7:mysqld
          8:mysqld
          9:mysqld

     In this example, we used the `--fields' options to separate the ID
     and type of each node with a colon character (`:'), and the
     `--rows' options to place the values for each node on a new line
     in the output.

  2. To produce a connection string that can be used by data, SQL, and
     API nodes to connect to the management server:

          shell> ./ndb_config --config-file=usr/local/mysql/cluster-data/config.ini \
          --query=hostname,portnumber --fields=: --rows=, --type=ndb_mgmd
          192.168.0.179:1186

  3. This invocation of *Note `ndb_config':
     mysql-cluster-programs-ndb-config. checks only data nodes (using
     the `--type' option), and shows the values for each node's ID and
     host name, as well as the values set for its `DataMemory',
     `IndexMemory', and `DataDir' parameters:

          shell> ./ndb_config --type=ndbd --query=id,host,datamemory,indexmemory,datadir -f ' : ' -r '\n'
          1 : 192.168.0.193 : 83886080 : 18874368 : /usr/local/mysql/cluster-data
          2 : 192.168.0.112 : 83886080 : 18874368 : /usr/local/mysql/cluster-data
          3 : 192.168.0.176 : 83886080 : 18874368 : /usr/local/mysql/cluster-data
          4 : 192.168.0.119 : 83886080 : 18874368 : /usr/local/mysql/cluster-data

     In this example, we used the short options `-f' and `-r' for
     setting the field delimiter and row separator, respectively.

  4. To exclude results from any host except one in particular, use the
     `--host' option:

          shell> ./ndb_config --host=192.168.0.176 -f : -r '\n' -q id,type
          3:ndbd
          5:ndb_mgmd

     In this example, we also used the short form `-q' to determine the
     attributes to be queried.

     Similarly, you can limit results to a node with a specific ID
     using the `--id' or `--nodeid' option.


File: manual.info,  Node: mysql-cluster-programs-ndb-cpcd,  Next: mysql-cluster-programs-ndb-delete-all,  Prev: mysql-cluster-programs-ndb-config,  Up: mysql-cluster-programs

17.4.8 `ndb_cpcd' -- Automate Testing for NDB Development
---------------------------------------------------------

A utility having this name was formerly part of an internal automated
test framework used in testing and debugging MySQL Cluster. It was
deprecated in MySQL Cluster NDB 7.0, and removed from MySQL Cluster
distributions provided by Oracle beginning with MySQL Cluster NDB 7.2.1.


File: manual.info,  Node: mysql-cluster-programs-ndb-delete-all,  Next: mysql-cluster-programs-ndb-desc,  Prev: mysql-cluster-programs-ndb-cpcd,  Up: mysql-cluster-programs

17.4.9 `ndb_delete_all' -- Delete All Rows from an NDB Table
------------------------------------------------------------

*Note `ndb_delete_all': mysql-cluster-programs-ndb-delete-all. deletes
all rows from the given *Note `NDB': mysql-cluster. table. In some
cases, this can be much faster than *Note `DELETE': delete. or even
*Note `TRUNCATE TABLE': truncate-table.

* Usage *

     ndb_delete_all -c CONNECT_STRING TBL_NAME -d DB_NAME

This deletes all rows from the table named TBL_NAME in the database
named DB_NAME. It is exactly equivalent to executing `TRUNCATE
DB_NAME.TBL_NAME' in MySQL.

The following table includes options that are specific to *Note
`ndb_delete_all': mysql-cluster-programs-ndb-delete-all. Additional
descriptions follow the table. For options common to most MySQL Cluster
programs (including *Note `ndb_delete_all':
mysql-cluster-programs-ndb-delete-all.), see *Note
mysql-cluster-program-options-common::.

*`ndb_delete_all' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note
`ndb_delete_all': mysql-cluster-programs-ndb-delete-all. program

Format                           Description               Added /
                                                           Removed
`--database=dbname',             Name of the database in   All MySQL 5.5
                                 which the table is found  based releases
`-d'                                                       
`--transactional',               Perform the delete in a   All MySQL 5.5
                                 single transaction (may   based releases
` -t '                           run out of operations)    
`--tupscan'                      Run tup scan              All MySQL 5.5
                                                           based releases
`--diskscan'                     Run disk scan             All MySQL 5.5
                                                           based releases

   *  `--transactional', `-t'

     Use of this option causes the delete operation to be performed as
     a single transaction.

     *Warning*:

     With very large tables, using this option may cause the number of
     operations available to the cluster to be exceeded.


File: manual.info,  Node: mysql-cluster-programs-ndb-desc,  Next: mysql-cluster-programs-ndb-drop-index,  Prev: mysql-cluster-programs-ndb-delete-all,  Up: mysql-cluster-programs

17.4.10 `ndb_desc' -- Describe NDB Tables
-----------------------------------------

*Note `ndb_desc': mysql-cluster-programs-ndb-desc. provides a detailed
description of one or more *Note `NDB': mysql-cluster. tables.

* Usage *

     ndb_desc -c CONNECT_STRING TBL_NAME -d DB_NAME [-p]

(_MySQL Cluster NDB 7.2.9 and later:_)

     ndb_desc -c CONNECT_STRING INDEX_NAME -d DB_NAME -t TBL_NAME

* Sample Output *

MySQL table creation and population statements:

     USE test;

     CREATE TABLE fish (
         id INT(11) NOT NULL AUTO_INCREMENT,
         name VARCHAR(20) NOT NULL,
         length_mm INT(11) NOT NULL,
         weight_gm INT(11) NOT NULL,

         PRIMARY KEY pk (id),
         UNIQUE KEY uk (name)
     ) ENGINE=NDB;

     INSERT INTO fish VALUES
         ('','guppy', 35, 2), ('','tuna', 2500, 150000),
         ('','shark', 3000, 110000), ('','manta ray', 1500, 50000),
         ('','grouper', 900, 125000), ('','puffer', 250, 2500);

Output from *Note `ndb_desc': mysql-cluster-programs-ndb-desc.:

     shell> ./ndb_desc -c localhost fish -d test -p
     -- fish --
     Version: 2
     Fragment type: 9
     K Value: 6
     Min load factor: 78
     Max load factor: 80
     Temporary table: no
     Number of attributes: 4
     Number of primary keys: 1
     Length of frm data: 311
     Row Checksum: 1
     Row GCI: 1
     SingleUserMode: 0
     ForceVarPart: 1
     FragmentCount: 2
     TableStatus: Retrieved
     -- Attributes --
     id Int PRIMARY KEY DISTRIBUTION KEY AT=FIXED ST=MEMORY AUTO_INCR
     name Varchar(20;latin1_swedish_ci) NOT NULL AT=SHORT_VAR ST=MEMORY
     length_mm Int NOT NULL AT=FIXED ST=MEMORY
     weight_gm Int NOT NULL AT=FIXED ST=MEMORY

     -- Indexes --
     PRIMARY KEY(id) - UniqueHashIndex
     PRIMARY(id) - OrderedIndex
     uk$unique(name) - UniqueHashIndex
     uk(name) - OrderedIndex

     -- Per partition info --
     Partition  Row count  Commit count  Frag fixed memory ...
     0          2          2             32768             ...
     1          4          4             32768             ...

     ... Frag varsized memory  Extent_space  Free extent_space
     ... 32768                 0             0
     ... 32768                 0             0

     NDBT_ProgramExit: 0 - OK

Information about multiple tables can be obtained in a single
invocation of *Note `ndb_desc': mysql-cluster-programs-ndb-desc. by
using their names, separated by spaces. All of the tables must be in
the same database.

Beginning with MySQL Cluster NDB 7.2.9, it is possible to obtain
additional information about a specific index using the `--table'
(short form: `-t') option introduced in this version and supplying the
name of the index as the first argument to *Note `ndb_desc':
mysql-cluster-programs-ndb-desc, as shown here:

     shell> ./ndb_desc uk -d test -t fish
     -- uk --
     Version: 3
     Base table: fish
     Number of attributes: 1
     Logging: 0
     Index type: OrderedIndex
     Index status: Retrieved
     -- Attributes --
     name Varchar(20;latin1_swedish_ci) NOT NULL AT=SHORT_VAR ST=MEMORY
     -- IndexTable 10/uk --
     Version: 3
     Fragment type: FragUndefined
     K Value: 6
     Min load factor: 78
     Max load factor: 80
     Temporary table: yes
     Number of attributes: 2
     Number of primary keys: 1
     Length of frm data: 0
     Row Checksum: 1
     Row GCI: 1
     SingleUserMode: 2
     ForceVarPart: 0
     FragmentCount: 4
     ExtraRowGciBits: 0
     ExtraRowAuthorBits: 0
     TableStatus: Retrieved
     -- Attributes --
     name Varchar(20;latin1_swedish_ci) NOT NULL AT=SHORT_VAR ST=MEMORY
     NDB$TNODE Unsigned [64] PRIMARY KEY DISTRIBUTION KEY AT=FIXED ST=MEMORY
     -- Indexes --
     PRIMARY KEY(NDB$TNODE) - UniqueHashIndex

     NDBT_ProgramExit: 0 - OK

When an index is specified in this way, the `--extra-partition-info' and
`--extra-node-info' options have no effect.

The `Version' column in the output contains the table's schema object
version. For information about interpreting this value, see NDB Schema
Object Versions
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals-schema-object-versions.html).

The `Extent_space' and `Free extent_space' columns are applicable only
to `NDB' tables having columns on disk; for tables having only
in-memory columns, these columns always contain the value `0'.

To illustrate their use, we modify the previous example. First, we must
create the necessary Disk Data objects, as shown here:

     CREATE LOGFILE GROUP lg_1
         ADD UNDOFILE 'undo_1.log'
         INITIAL_SIZE 16M
         UNDO_BUFFER_SIZE 2M
         ENGINE NDB;

     ALTER LOGFILE GROUP lg_1
         ADD UNDOFILE 'undo_2.log'
         INITIAL_SIZE 12M
         ENGINE NDB;

     CREATE TABLESPACE ts_1
         ADD DATAFILE 'data_1.dat'
         USE LOGFILE GROUP lg_1
         INITIAL_SIZE 32M
         ENGINE NDB;

     ALTER TABLESPACE ts_1
         ADD DATAFILE 'data_2.dat'
         INITIAL_SIZE 48M
         ENGINE NDB;

(For more information on the statements just shown and the objects
created by them, see *Note mysql-cluster-disk-data-objects::, as well as
*Note create-logfile-group::, and *Note create-tablespace::.)

Now we can create and populate a version of the `fish' table that
stores 2 of its columns on disk (deleting the previous version of the
table first, if it already exists):

     CREATE TABLE fish (
         id INT(11) NOT NULL AUTO_INCREMENT,
         name VARCHAR(20) NOT NULL,
         length_mm INT(11) NOT NULL,
         weight_gm INT(11) NOT NULL,

         PRIMARY KEY pk (id),
         UNIQUE KEY uk (name)
     ) TABLESPACE ts_1 STORAGE DISK
     ENGINE=NDB;

     INSERT INTO fish VALUES
         ('','guppy', 35, 2), ('','tuna', 2500, 150000),
         ('','shark', 3000, 110000), ('','manta ray', 1500, 50000),
         ('','grouper', 900, 125000), ('','puffer', 250, 2500);

When run against this version of the table, *Note `ndb_desc':
mysql-cluster-programs-ndb-desc. displays the following output:

     shell> ./ndb_desc -c localhost fish -d test -p
     -- fish --
     Version: 3
     Fragment type: 9
     K Value: 6
     Min load factor: 78
     Max load factor: 80
     Temporary table: no
     Number of attributes: 4
     Number of primary keys: 1
     Length of frm data: 321
     Row Checksum: 1
     Row GCI: 1
     SingleUserMode: 0
     ForceVarPart: 1
     FragmentCount: 2
     TableStatus: Retrieved
     -- Attributes --
     id Int PRIMARY KEY DISTRIBUTION KEY AT=FIXED ST=MEMORY AUTO_INCR
     name Varchar(20;latin1_swedish_ci) NOT NULL AT=SHORT_VAR ST=MEMORY
     length_mm Int NOT NULL AT=FIXED ST=DISK
     weight_gm Int NOT NULL AT=FIXED ST=DISK

     -- Indexes --
     PRIMARY KEY(id) - UniqueHashIndex
     PRIMARY(id) - OrderedIndex
     uk$unique(name) - UniqueHashIndex
     uk(name) - OrderedIndex
     -- Per partition info --
     Partition  Row count  Commit count  Frag fixed memory ...
     0          2          2             32768             ...
     1          4          4             32768             ...

     ... Frag varsized memory  Extent_space  Free extent_space
     ... 32768                 0             0
     ... 32768                 0             0

     NDBT_ProgramExit: 0 - OK

This means that 1048576 bytes are allocated from the tablespace for
this table on each partition, of which 1044440 bytes remain free for
additional storage. In other words, 1048576 - 1044440 = 4136 bytes per
partition is currently being used to store the data from this table's
disk-based columns. The number of bytes shown as `Free extent_space' is
available for storing on-disk column data from the `fish' table only;
for this reason, it is not visible when selecting from the *Note
`INFORMATION_SCHEMA.FILES': files-table.  table.

The following table includes options that are specific to *Note
`ndb_desc': mysql-cluster-programs-ndb-desc. Additional descriptions
follow the table. For options common to most MySQL Cluster programs
(including *Note `ndb_desc': mysql-cluster-programs-ndb-desc.), see
*Note mysql-cluster-program-options-common::.

*`ndb_desc' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note `ndb_desc':
mysql-cluster-programs-ndb-desc. program

Format                           Description               Added /
                                                           Removed
`--blob-info',                   Include partition         All MySQL 5.5
                                 information for BLOB      based releases
` -b '                           tables in output.         
                                 Requires that the -p      
                                 option also be used       
`--database=dbname',             Name of database          All MySQL 5.5
                                 containing table          based releases
` -d '                                                     
`--extra-node-info',             Include                   All MySQL 5.5
                                 partition-to-data-node    based releases
` -n '                           mappings in output.       
                                 Requires that the -p      
                                 option also be used       
`--extra-partition-info',        Display information       All MySQL 5.5
                                 about partitions          based releases
` -p '                                                     
`--retries=#',                   Number of times to retry  All MySQL 5.5
                                 the connection (once per  based releases
` -r '                           second)                   
`--table=tbl_name',              Specify the table in      ADDED: NDB
                                 which to find an index.   7.2.9
` -t '                           When this option is used, 
                                 -p and -n have no effect  
                                 and are ignored.          
`--unqualified',                 Use unqualified table     All MySQL 5.5
                                 names                     based releases
` -u '                                                     

   *  `--blob-info', `-b'

     Include information about subordinate *Note `BLOB': blob. and
     *Note `TEXT': blob. columns.

     Use of this option also requires the use of the
     `--extra-partition-info' (`-p') option.

   *  `--database=DB_NAME', `-d'

     Specify the database in which the table should be found.

   *  `--extra-node-info', `-n'

     Include information about the mappings between table partitions
     and the data nodes upon which they reside. This information can be
     useful for verifying distribution awareness mechanisms and
     supporting more efficient application access to the data stored in
     MySQL Cluster.

     Use of this option also requires the use of the
     `--extra-partition-info' (`-p') option.

   *  `--extra-partition-info', `-p'

     Print additional information about the table's partitions.

   *  `--retries=#', `-r'

     Try to connect this many times before giving up. One connect
     attempt is made per second.

   *  `--table=TBL_NAME', `-t'

     Specify the table in which to look for an index.

     This option was added in MySQL Cluster NDB 7.2.9.

   *  `--unqualified', `-u'

     Use unqualified table names.


File: manual.info,  Node: mysql-cluster-programs-ndb-drop-index,  Next: mysql-cluster-programs-ndb-drop-table,  Prev: mysql-cluster-programs-ndb-desc,  Up: mysql-cluster-programs

17.4.11 `ndb_drop_index' -- Drop Index from an NDB Table
--------------------------------------------------------

*Note `ndb_drop_index': mysql-cluster-programs-ndb-drop-index. drops
the specified index from an *Note `NDB': mysql-cluster. table. _It is
recommended that you use this utility only as an example for writing
NDB API applications_--see the Warning later in this section for
details.

* Usage *

     ndb_drop_index -c CONNECT_STRING TABLE_NAME INDEX -d DB_NAME

The statement shown above drops the index named INDEX from the TABLE in
the DATABASE.

The following table includes options that are specific to *Note
`ndb_drop_index': mysql-cluster-programs-ndb-drop-index. Additional
descriptions follow the table. For options common to most MySQL Cluster
programs (including *Note `ndb_drop_index':
mysql-cluster-programs-ndb-drop-index.), see *Note
mysql-cluster-program-options-common::.

*`ndb_drop_index' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note
`ndb_drop_index': mysql-cluster-programs-ndb-drop-index. program

Format                           Description               Added /
                                                           Removed
`--database=dbname',             Name of the database in   All MySQL 5.5
                                 which the table is found  based releases
`-d'                                                       

*Warning*:

_Operations performed on Cluster table indexes using the NDB API are
not visible to MySQL and make the table unusable by a MySQL server_. If
you use this program to drop an index, then try to access the table
from an SQL node, an error results, as shown here:

     shell> ./ndb_drop_index -c localhost dogs ix -d ctest1
     Dropping index dogs/idx...OK

     NDBT_ProgramExit: 0 - OK

     shell> ./mysql -u jon -p ctest1
     Enter password: *******
     Reading table information for completion of table and column names
     You can turn off this feature to get a quicker startup with -A

     Welcome to the MySQL monitor.  Commands end with ; or \g.
     Your MySQL connection id is 7 to server version: 5.5.33-ndb-7.2.14

     Type 'help;' or '\h' for help. Type '\c' to clear the buffer.

     mysql> SHOW TABLES;
     +------------------+
     | Tables_in_ctest1 |
     +------------------+
     | a                |
     | bt1              |
     | bt2              |
     | dogs             |
     | employees        |
     | fish             |
     +------------------+
     6 rows in set (0.00 sec)

     mysql> SELECT * FROM dogs;
     `ERROR 1296 (HY000): Got error 4243 'Index not found' from NDBCLUSTER'

In such a case, your _only_ option for making the table available to
MySQL again is to drop the table and re-create it. You can use either
the SQL statement*Note `DROP TABLE': drop-table. or the *Note
`ndb_drop_table': mysql-cluster-programs-ndb-drop-table. utility (see
*Note mysql-cluster-programs-ndb-drop-table::) to drop the table.


File: manual.info,  Node: mysql-cluster-programs-ndb-drop-table,  Next: mysql-cluster-programs-ndb-error-reporter,  Prev: mysql-cluster-programs-ndb-drop-index,  Up: mysql-cluster-programs

17.4.12 `ndb_drop_table' -- Drop an NDB Table
---------------------------------------------

*Note `ndb_drop_table': mysql-cluster-programs-ndb-drop-table. drops
the specified *Note `NDB': mysql-cluster. table. (If you try to use this
on a table created with a storage engine other than *Note `NDB':
mysql-cluster, the attempt fails with the error `723: No such table
exists'.) This operation is extremely fast; in some cases, it can be an
order of magnitude faster than using a MySQL *Note `DROP TABLE':
drop-table. statement on an *Note `NDB': mysql-cluster.  table.

* Usage *

     ndb_drop_table -c CONNECT_STRING TBL_NAME -d DB_NAME

The following table includes options that are specific to *Note
`ndb_drop_table': mysql-cluster-programs-ndb-drop-table. Additional
descriptions follow the table. For options common to most MySQL Cluster
programs (including *Note `ndb_drop_table':
mysql-cluster-programs-ndb-drop-table.), see *Note
mysql-cluster-program-options-common::.

*`ndb_drop_table' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note
`ndb_drop_table': mysql-cluster-programs-ndb-drop-table. program

Format                           Description               Added /
                                                           Removed
`--database=dbname',             Name of the database in   All MySQL 5.5
                                 which the table is found  based releases
`-d'                                                       


File: manual.info,  Node: mysql-cluster-programs-ndb-error-reporter,  Next: mysql-cluster-programs-ndb-index-stat,  Prev: mysql-cluster-programs-ndb-drop-table,  Up: mysql-cluster-programs

17.4.13 `ndb_error_reporter' -- NDB Error-Reporting Utility
-----------------------------------------------------------

*Note `ndb_error_reporter': mysql-cluster-programs-ndb-error-reporter.
creates an archive from data node and management node log files that
can be used to help diagnose bugs or other problems with a cluster. _It
is highly recommended that you make use of this utility when filing
reports of bugs in MySQL Cluster_.

The following table includes command options specific to the MySQL
Cluster program *Note `ndb_error_reporter':
mysql-cluster-programs-ndb-error-reporter.  Additional descriptions
follow the table. For options common to most MySQL Cluster programs
(including *Note `ndb_error_reporter':
mysql-cluster-programs-ndb-error-reporter.), see *Note
mysql-cluster-program-options-common::.

*`ndb_error_reporter' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note
`ndb_error_reporter': mysql-cluster-programs-ndb-error-reporter. program

Format                           Description               Added /
                                                           Removed
` --fs '                         Include file system data  All MySQL 5.5
                                 in error report; can use  based releases
                                 a large amount of disk    
                                 space                     

* Usage *

     ndb_error_reporter PATH/TO/CONFIG-FILE [USERNAME] [--fs]

This utility is intended for use on a management node host, and
requires the path to the management host configuration file
(`config.ini'). Optionally, you can supply the name of a user that is
able to access the cluster's data nodes using SSH, to copy the data
node log files.  ndb_error_reporter then includes all of these files in
archive that is created in the same directory in which it is run. The
archive is named `ndb_error_report_YYYYMMDDHHMMSS.tar.bz2', where
YYYYMMDDHHMMSS is a datetime string.

If the `--fs' is used, then the data node file systems are also copied
to the management host and included in the archive that is produced by
this script. As data node file systems can be extremely large even
after being compressed, we ask that you please do _not_ send archives
created using this option to Oracle unless you are specifically
requested to do so.

Options for fs

*Command-Line Format*  `--fs'          
                       *Permitted        
                       Values*         
*Type*                 `boolean'        
*Default*              `FALSE'         


File: manual.info,  Node: mysql-cluster-programs-ndb-index-stat,  Next: mysql-cluster-programs-ndb-print-backup-file,  Prev: mysql-cluster-programs-ndb-error-reporter,  Up: mysql-cluster-programs

17.4.14 `ndb_index_stat' -- NDB Index Statistics Utility
--------------------------------------------------------

*Note `ndb_index_stat': mysql-cluster-programs-ndb-index-stat ...

* Usage *

To obtain basic index statistics about a given *Note `NDB':
mysql-cluster. table, invoke *Note `ndb_index_stat':
mysql-cluster-programs-ndb-index-stat. as shown here, with the name of
the table as the first argument and the name of the database containing
this table specified immediately following it, using the `--database'
(`-d') option:

     ndb_index_stat TABLE -d DATABASE

In this example, we use *Note `ndb_index_stat':
mysql-cluster-programs-ndb-index-stat. to obtain such information about
an `NDB' table named `mytable' in the `test' database:

     shell> ndb_index_stat -d test mytable
     table:mytable index:PRIMARY fragCount:4
     sampleVersion:2 loadTime:1336751773 sampleCount:0 keyBytes:0
     query cache: valid:1 sampleCount:0 totalBytes:0
     times in ms: save: 12.380 sort: 0.001

     NDBT_ProgramExit: 0 - OK

The `--verbose' option provides some additional output, as shown here:

     shell> ndb_index_stat -d test mytable --verbose
     random seed 1337010518
     connected
     loop 1 of 1
     table:mytable index:PRIMARY fragCount:4
     sampleVersion:2 loadTime:1336751773 sampleCount:0 keyBytes:0
     read stats
     query cache created
     query cache: valid:1 sampleCount:0 totalBytes:0
     times in ms: save: 20.766 sort: 0.001
     disconnected

     NDBT_ProgramExit: 0 - OK

     shell>

* Options *

The following table includes options that are specific to the MySQL
Cluster *Note `ndb_index_stat': mysql-cluster-programs-ndb-index-stat.
utility.  Additional descriptions are listed following the table. For
options common to most MySQL Cluster programs (including *Note
`ndb_index_stat': mysql-cluster-programs-ndb-index-stat.), see *Note
mysql-cluster-program-options-common::.

*`ndb_index_stat' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note
`ndb_index_stat': mysql-cluster-programs-ndb-index-stat. program

Format                           Description               Added /
                                                           Removed
`--database=name',               Name of the database      All MySQL 5.5
                                 containing the table.     based releases
`-d'                                                       
`--delete'                       Delete index statistics   All MySQL 5.5
                                 for the given table,      based releases
                                 stopping any auto-update  
                                 previously configured.    
`--update'                       Update index statistics   All MySQL 5.5
                                 for the given table,      based releases
                                 restarting any            
                                 auto-update previously    
                                 configured.               
`--dump'                         Print the query cache.    All MySQL 5.5
                                                           based releases
`--query=#'                      Perform a number of       All MySQL 5.5
                                 random range queries on   based releases
                                 first key attr (must be   
                                 int unsigned).            
`--sys-drop'                     Drop any statistics       All MySQL 5.5
                                 tables and events in NDB  based releases
                                 kernel (all statistics    
                                 are lost)                 
`--sys-create'                   Create all statistics     All MySQL 5.5
                                 tables and events in NDB  based releases
                                 kernel, if none of them   
                                 already exist             
`--sys-create-if-not-exist'      Create any statistics     All MySQL 5.5
                                 tables and events in NDB  based releases
                                 kernel that do not        
                                 already exist.            
`--sys-create-if-not-valid'      Create any statistics     All MySQL 5.5
                                 tables or events that do  based releases
                                 not already exist in the  
                                 NDB kernel. after         
                                 dropping any that are     
                                 invalid.                  
`--sys-check'                    Verify that NDB system    All MySQL 5.5
                                 index statistics and      based releases
                                 event tables exist.       
`--sys-skip-tables'              Do not apply sys-*        All MySQL 5.5
                                 options to tables.        based releases
`--sys-skip-events'              Do not apply sys-*        All MySQL 5.5
                                 options to events.        based releases
`--verbose',                     Turn on verbose output    All MySQL 5.5
                                                           based releases
`-v'                                                       
`--loops=#'                      Set the number of times   All MySQL 5.5
                                 to perform a given        based releases
                                 command. Default is 0.    

`ndb_index_stat' statistics options

The following options are used to generate index statistics.  They work
with a given table and database. They cannot be mixed with *Note
ndb-index-stat-options-system::.

   *  `--database=NAME', `-d NAME'

     Options for database

     *Command-Line        `--database=name'        
     Format*                              
                          `-d'            
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `[none]'        
     *Range*              ` .. '          

     The name of the database that contains the table being queried.

   *  `--delete'

     Options for delete

     *Command-Line        `--delete'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `true'          
     *Range*              ` .. '          

     Delete the index statistics for the given table, stopping any
     auto-update that was previously configured.

   *  `--update'

     Options for update

     *Command-Line        `--update'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `true'          
     *Range*              ` .. '          

     Update the index statistics for the given table, and restart any
     auto-update that previously configured.

   *  `--dump'

     Options for dump

     *Command-Line        `--dump'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `true'          
     *Range*              ` .. '          

     Dump the contents of the query cache.

   *  `--query=#'

     Options for query

     *Command-Line        `--query=#'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          MAX_INT'        

     Perform random range queries on first key attribute (must be int
     unsigned).

`ndb_index_stat' system options

The following options are used to generate and update the statistics
tables in the NDB kernel. They cannot be mixed with *Note
ndb-index-stat-options-statistics::.

   *  `--sys-drop'

     Options for sys-drop

     *Command-Line        `--sys-drop'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `true'          
     *Range*              ` .. '          

     Drop all statistics tables and events in the NDB kernel.  _This
     causes all statistics to be lost_.

   *  `--sys-create'

     Options for sys-create

     *Command-Line        `--sys-create'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `true'          
     *Range*              ` .. '          

     Create all statistics tables and events in the NDB kernel.  This
     works only if none of them exist previously.

   *  `sys-create-if-not-exist'

     Options for sys-create-if-not-exist

     *Command-Line        `--sys-create-if-not-exist'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `true'          
     *Range*              ` .. '          

     Create any NDB system statistics tables or events (or both) that
     do not already exist when the program is invoked.

   *  `--sys-create-if-not-valid'

     Options for sys-create-if-not-valid

     *Command-Line        `--sys-create-if-not-valid'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `true'          
     *Range*              ` .. '          

     Create any NDB system statistics tables or events that do not
     already exist, after dropping any that are invalid.

   *  `--sys-check'

     Options for sys-check

     *Command-Line        `--sys-check'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `true'          
     *Range*              ` .. '          

     Verify that all required system statistics tables and events exist
     in the NDB kernel.

   *  `--sys-skip-tables'

     Options for sys-skip-tables

     *Command-Line        `--sys-skip-tables'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `true'          
     *Range*              ` .. '          

     Do not apply any `--sys-*' options to any statistics tables.

   *  `--sys-skip-events'

     Options for sys-skip-events

     *Command-Line        `--sys-skip-events'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `true'          
     *Range*              ` .. '          

     Do not apply any `--sys-*' options to any events.

   *  `--verbose'

     Options for verbose

     *Command-Line        `--verbose'        
     Format*                              
                          `-v'            
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `true'          
     *Range*              ` .. '          

     Turn on verbose output.

   *  `--loops=#'

     Options for loops

     *Command-Line        `--loops=#'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             
     *Range*              `0 ..           
                          MAX_INT'        

     Repeat commands this number of times (for use in testing).


File: manual.info,  Node: mysql-cluster-programs-ndb-print-backup-file,  Next: mysql-cluster-programs-ndb-print-schema-file,  Prev: mysql-cluster-programs-ndb-index-stat,  Up: mysql-cluster-programs

17.4.15 `ndb_print_backup_file' -- Print NDB Backup File Contents
-----------------------------------------------------------------

*Note `ndb_print_backup_file':
mysql-cluster-programs-ndb-print-backup-file. obtains diagnostic
information from a cluster backup file.

* Usage *

     ndb_print_backup_file FILE_NAME

FILE_NAME is the name of a cluster backup file. This can be any of the
files (`.Data', `.ctl', or `.log' file) found in a cluster backup
directory. These files are found in the data node's backup directory
under the subdirectory `BACKUP-#', where # is the sequence number for
the backup. For more information about cluster backup files and their
contents, see *Note mysql-cluster-backup-concepts::.

Like *Note `ndb_print_schema_file':
mysql-cluster-programs-ndb-print-schema-file. and *Note
`ndb_print_sys_file': mysql-cluster-programs-ndb-print-sys-file. (and
unlike most of the other *Note `NDB': mysql-cluster. utilities that are
intended to be run on a management server host or to connect to a
management server) *Note `ndb_print_backup_file':
mysql-cluster-programs-ndb-print-backup-file.  must be run on a cluster
data node, since it accesses the data node file system directly.
Because it does not make use of the management server, this utility can
be used when the management server is not running, and even when the
cluster has been completely shut down.

* Additional Options *

None.


File: manual.info,  Node: mysql-cluster-programs-ndb-print-schema-file,  Next: mysql-cluster-programs-ndb-print-sys-file,  Prev: mysql-cluster-programs-ndb-print-backup-file,  Up: mysql-cluster-programs

17.4.16 `ndb_print_schema_file' -- Print NDB Schema File Contents
-----------------------------------------------------------------

*Note `ndb_print_schema_file':
mysql-cluster-programs-ndb-print-schema-file. obtains diagnostic
information from a cluster schema file.

* Usage *

     ndb_print_schema_file FILE_NAME

FILE_NAME is the name of a cluster schema file. For more information
about cluster schema files, see MySQL Cluster Data Node `FileSystemDir'
Files
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals-ndbd-filesystemdir-files.html).

Like *Note `ndb_print_backup_file':
mysql-cluster-programs-ndb-print-backup-file. and *Note
`ndb_print_sys_file': mysql-cluster-programs-ndb-print-sys-file. (and
unlike most of the other *Note `NDB': mysql-cluster. utilities that are
intended to be run on a management server host or to connect to a
management server) `ndb_schema_backup_file' must be run on a cluster
data node, since it accesses the data node file system directly.
Because it does not make use of the management server, this utility can
be used when the management server is not running, and even when the
cluster has been completely shut down.

* Additional Options *

None.


File: manual.info,  Node: mysql-cluster-programs-ndb-print-sys-file,  Next: mysql-cluster-programs-ndbd-redo-log-reader,  Prev: mysql-cluster-programs-ndb-print-schema-file,  Up: mysql-cluster-programs

17.4.17 `ndb_print_sys_file' -- Print NDB System File Contents
--------------------------------------------------------------

*Note `ndb_print_sys_file': mysql-cluster-programs-ndb-print-sys-file.
obtains diagnostic information from a MySQL Cluster system file.

* Usage *

     ndb_print_sys_file FILE_NAME

FILE_NAME is the name of a cluster system file (sysfile). Cluster
system files are located in a data node's data directory (`DataDir');
the path under this directory to system files matches the pattern
`ndb_#_fs/D#/DBDIH/P#.sysfile'.  In each case, the # represents a
number (not necessarily the same number). For more information, see
MySQL Cluster Data Node `FileSystemDir' Files
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals-ndbd-filesystemdir-files.html).

Like *Note `ndb_print_backup_file':
mysql-cluster-programs-ndb-print-backup-file. and *Note
`ndb_print_schema_file': mysql-cluster-programs-ndb-print-schema-file.
(and unlike most of the other *Note `NDB': mysql-cluster. utilities
that are intended to be run on a management server host or to connect to
a management server) *Note `ndb_print_backup_file':
mysql-cluster-programs-ndb-print-backup-file.  must be run on a cluster
data node, since it accesses the data node file system directly.
Because it does not make use of the management server, this utility can
be used when the management server is not running, and even when the
cluster has been completely shut down.

* Additional Options *

None.


File: manual.info,  Node: mysql-cluster-programs-ndbd-redo-log-reader,  Next: mysql-cluster-programs-ndb-restore,  Prev: mysql-cluster-programs-ndb-print-sys-file,  Up: mysql-cluster-programs

17.4.18 `ndbd_redo_log_reader' -- Check and Print Content of Cluster Redo Log
-----------------------------------------------------------------------------

Reads a redo log file, checking it for errors, printing its contents in
a human-readable format, or both.  *Note `ndbd_redo_log_reader':
mysql-cluster-programs-ndbd-redo-log-reader. is intended for use
primarily by MySQL Cluster developers and Support personnel in
debugging and diagnosing problems.

This utility remains under development, and its syntax and behavior are
subject to change in future MySQL Cluster releases.

The C++ source files for *Note `ndbd_redo_log_reader':
mysql-cluster-programs-ndbd-redo-log-reader.  can be found in the
directory `/storage/ndb/src/kernel/blocks/dblqh/redoLogReader'.

The following table includes options that are specific to the MySQL
Cluster program *Note `ndbd_redo_log_reader':
mysql-cluster-programs-ndbd-redo-log-reader.  Additional descriptions
follow the table. For options common to most MySQL Cluster programs
(including *Note `ndbd_redo_log_reader':
mysql-cluster-programs-ndbd-redo-log-reader.), see *Note
mysql-cluster-program-options-common::.

*`ndbd_redo_log_reader' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note
`ndbd_redo_log_reader': mysql-cluster-programs-ndbd-redo-log-reader.
program

Format                           Description               Added /
                                                           Removed
` -noprint '                     Do not print records      All MySQL 5.5
                                                           based releases
` -nocheck '                     Do not check records for  All MySQL 5.5
                                 errors                    based releases

* Usage *

     ndbd_redo_log_reader FILE_NAME [OPTIONS]

FILE_NAME is the name of a cluster redo log file. redo log files are
located in the numbered directories under the data node's data directory
(`DataDir'); the path under this directory to the redo log files
matches the pattern `ndb_#_fs/D#/LCP/#/T#F#.Data'.  In each case, the #
represents a number (not necessarily the same number). For more
information, see MySQL Cluster Data Node `FileSystemDir' Files
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals-ndbd-filesystemdir-files.html).

The name of the file to be read may be followed by one or more of the
options listed here:

   * Options for noprint

     *Command-Line        `-noprint'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     `-noprint': Do not print the contents of the log file.

   * Options for nocheck

     *Command-Line        `-nocheck'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     `-nocheck': Do not check the log file for errors.

Like *Note `ndb_print_backup_file':
mysql-cluster-programs-ndb-print-backup-file. and *Note
`ndb_print_schema_file': mysql-cluster-programs-ndb-print-schema-file.
(and unlike most of the *Note `NDB': mysql-cluster. utilities that are
intended to be run on a management server host or to connect to a
management server) *Note `ndbd_redo_log_reader':
mysql-cluster-programs-ndbd-redo-log-reader. must be run on a cluster
data node, since it accesses the data node file system directly.
Because it does not make use of the management server, this utility can
be used when the management server is not running, and even when the
cluster has been completely shut down.


File: manual.info,  Node: mysql-cluster-programs-ndb-restore,  Next: mysql-cluster-programs-ndb-select-all,  Prev: mysql-cluster-programs-ndbd-redo-log-reader,  Up: mysql-cluster-programs

17.4.19 `ndb_restore' -- Restore a MySQL Cluster Backup
-------------------------------------------------------

The cluster restoration program is implemented as a separate
command-line utility *Note `ndb_restore':
mysql-cluster-programs-ndb-restore, which can normally be found in the
MySQL `bin' directory. This program reads the files created as a result
of the backup and inserts the stored information into the database.

*Note `ndb_restore': mysql-cluster-programs-ndb-restore. must be
executed once for each of the backup files that were created by the
`START BACKUP' command used to create the backup (see *Note
mysql-cluster-backup-using-management-client::).  This is equal to the
number of data nodes in the cluster at the time that the backup was
created.

*Note*:

Before using *Note `ndb_restore': mysql-cluster-programs-ndb-restore,
it is recommended that the cluster be running in single user mode,
unless you are restoring multiple data nodes in parallel. See *Note
mysql-cluster-single-user-mode::, for more information.

The following table includes options that are specific to the MySQL
Cluster native backup restoration program *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. Additional descriptions follow the
table. For options common to most MySQL Cluster programs (including
*Note `ndb_restore': mysql-cluster-programs-ndb-restore.), see *Note
mysql-cluster-program-options-common::.

*`ndb_restore' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. program

Format                           Description               Added /
                                                           Removed
`--connect',                     Alias for -connectstring. All MySQL 5.5
                                                           based releases
` -c '                                                     
`--nodeid=#',                    Back up files from node   All MySQL 5.5
                                 with this ID              based releases
` -n '                                                     
`--backupid=#',                  Restore from the backup   All MySQL 5.5
                                 with the given ID         based releases
` -b '                                                     
` --restore_data '               Restore table data and    All MySQL 5.5
                                 logs into NDB Cluster     based releases
                                 using the NDB API         
`--restore_meta',                Restore metadata to NDB   All MySQL 5.5
                                 Cluster using the NDB API based releases
` -m '                                                     
`--no-upgrade',                  Do not upgrade array      All MySQL 5.5
                                 type for varsize          based releases
` -u '                           attributes which do not   
                                 already resize VAR data,  
                                 and do not change column  
                                 attributes                
`--promote-attributes',          Allow attributes to be    All MySQL 5.5
                                 promoted when restoring   based releases
` -A '                           data from backup          
`--preserve-trailing-spaces',    Allow preservation of     All MySQL 5.5
                                 trailing spaces           based releases
` -P '                           (including padding) when  
                                 promoting fixed-width     
                                 string types to           
                                 variable-width types      
`--no-restore-disk-objects',     Do not restore objects    All MySQL 5.5
                                 relating to Disk Data     based releases
` -d '                                                     
`--restore_epoch',               Restore epoch info into   All MySQL 5.5
                                 the status table.         based releases
` -e '                           Convenient on a MySQL     
                                 Cluster replication       
                                 slave for starting        
                                 replication. The row in   
                                 mysql.ndb_apply_status    
                                 with id 0 will be         
                                 updated/inserted.         
`--skip-table-check',            Skip table structure      All MySQL 5.5
                                 check during restoring    based releases
` -s '                           of data                   
`--parallelism=#',               Number of parallel        All MySQL 5.5
                                 transactions to use       based releases
` -p '                           while restoring data      
` --print '                      Print metadata, data and  All MySQL 5.5
                                 log to stdout             based releases
                                 (equivalent to            
                                 -print_meta -print_data   
                                 -print_log)               
` --print_meta '                 Print metadata to stdout  All MySQL 5.5
                                                           based releases
` --print_data '                 Print data to stdout      All MySQL 5.5
                                                           based releases
` --print_log '                  Print to stdout           All MySQL 5.5
                                                           based releases
` --backup_path=path '           Path to backup files      All MySQL 5.5
                                 directory                 based releases
`--dont_ignore_systab_0',        Do not ignore system      All MySQL 5.5
                                 table during restore.     based releases
` -f '                           Experimental only; not    
                                 for production use        
`--ndb-nodegroup-map=map',       Nodegroup map for         All MySQL 5.5
                                 NDBCLUSTER storage        based releases
` -z '                           engine. Syntax: list of   
                                 (source_nodegroup,        
                                 destination_nodegroup)    
` --fields-enclosed-by=char '    Fields are enclosed with  All MySQL 5.5
                                 the indicated character   based releases
` --fields-terminated-by=char '  Fields are terminated by  All MySQL 5.5
                                 the indicated character   based releases
`                                Fields are optionally     All MySQL 5.5
--fields-optionally-enclosed-by  enclosed with the         based releases
'                                indicated character       
` --lines-terminated-by=char '   Lines are terminated by   All MySQL 5.5
                                 the indicated character   based releases
` --hex '                        Print binary types in     All MySQL 5.5
                                 hexadecimal format        based releases
`--tab=path',                    Creates a tab-separated   All MySQL 5.5
                                 .txt file for each table  based releases
` -T '                           in the given path         
` --append '                     Append data to a          All MySQL 5.5
                                 tab-delimited file        based releases
` --progress-frequency=# '       Print status of           All MySQL 5.5
                                 restoration each given    based releases
                                 number of seconds         
` --no-binlog '                  If a mysqld is connected  All MySQL 5.5
                                 and using binary          based releases
                                 logging, do not log the   
                                 restored data             
` --verbose=# '                  Level of verbosity in     All MySQL 5.5
                                 output                    based releases
` --include-databases=db-list '  List of one or more       All MySQL 5.5
                                 databases to restore      based releases
                                 (excludes those not       
                                 named)                    
` --exclude-databases=db-list '  List of one or more       All MySQL 5.5
                                 databases to exclude      based releases
                                 (includes those not       
                                 named)                    
` --include-tables=table-list '  List of one or more       All MySQL 5.5
                                 tables to restore         based releases
                                 (excludes those in same   
                                 database that are not     
                                 named); each table        
                                 reference must include    
                                 the database name         
` --exclude-tables=table-list '  List of one or more       All MySQL 5.5
                                 tables to exclude         based releases
                                 (includes those in same   
                                 database that are not     
                                 not named); each table    
                                 reference must include    
                                 the database name         
` --exclude-missing-columns '    Causes columns from the   All MySQL 5.5
                                 backup version of a       based releases
                                 table that are missing    
                                 from the version of the   
                                 table in the database to  
                                 be ignored.               
` --disable-indexes '            Causes indexes from a     All MySQL 5.5
                                 backup to be ignored;     based releases
                                 may decrease time needed  
                                 to restore data.          
` --rebuild-indexes '            Causes multi-threaded     All MySQL 5.5
                                 ordered index rebuilding  based releases
                                 of indexes found in the   
                                 backup.                   
` --skip-broken-objects '        Causes missing blob       All MySQL 5.5
                                 tables in the backup      based releases
                                 file to be ignored.       
` --skip-unknown-objects '       Causes schema objects     All MySQL 5.5
                                 not recognized by         based releases
                                 ndb_restore to be         
                                 ignored when restoring a  
                                 backup made from a newer  
                                 MySQL Cluster version to  
                                 an older version.         
` --rewrite-database=olddb,newdb Restores to a database    All MySQL 5.5
'                                with a different name     based releases
                                 than the original         
`--lossy-conversions',           Allow lossy conversions   All MySQL 5.5
                                 of column values (type    based releases
` -L '                           demotions or changes in   
                                 sign) when restoring      
                                 data from backup          
` --restore-privilege-tables '   Restore MySQL privilege   All MySQL 5.5
                                 tables that were          based releases
                                 previously moved to NDB.  

Typical options for this utility are shown here:

     ndb_restore [-c CONNECTSTRING] -n NODE_ID [-m] -b BACKUP_ID \
         -r --backup_path=/PATH/TO/BACKUP/FILES

The `-c' option is used to specify a connection string which tells
`ndb_restore' where to locate the cluster management server. (See *Note
mysql-cluster-connection-strings::, for information on connection
strings.) If this option is not used, then *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. attempts to connect to a management
server on `localhost:1186'. This utility acts as a cluster API node,
and so requires a free connection `slot' to connect to the cluster
management server. This means that there must be at least one `[api]'
or `[mysqld]' section that can be used by it in the cluster
`config.ini' file. It is a good idea to keep at least one empty `[api]'
or `[mysqld]' section in `config.ini' that is not being used for a
MySQL server or other application for this reason (see *Note
mysql-cluster-api-definition::).

You can verify that *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. is connected to the cluster by
using the `SHOW' command in the *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm. management client. You can also
accomplish this from a system shell, as shown here:

     shell> ndb_mgm -e "SHOW"

`-n' is used to specify the node ID of the data node on which the
backups were taken.

The first time you run the *Note `ndb_restore':
mysql-cluster-programs-ndb-restore.  restoration program, you also need
to restore the metadata. In other words, you must re-create the
database tables--this can be done by running it with the
`--restore_meta' (`-m') option.  Restoring the metdata need be done
only on a single data node; this is sufficient to restore it to the
entire cluster. Note that the cluster should have an empty database
when starting to restore a backup. (In other words, you should start
*Note `ndbd': mysql-cluster-programs-ndbd. with `--initial' prior to
performing the restore.)

It is possible to restore data without restoring table metadata.  The
default behavior when doing this is for *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. to fail with an error if table data
do not match the table schema; this can be overridden using the
`--skip-table-check' or `-s' option.

Some of the restrictions on mismatches in column definitions when
restoring data using *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. are relaxed; when one of these
types of mismatches is encountered, *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. does not stop with an error as it
did previously, but rather accepts the data and inserts it into the
target table while issuing a warning to the user that this is being
done. This behavior occurs whether or not either of the options
`--skip-table-check' or `--promote-attributes' is in use. These
differences in column definitions are of the following types:

   * Different `COLUMN_FORMAT' settings (`FIXED', `DYNAMIC', `DEFAULT')

   * Different `STORAGE' settings (`MEMORY', `DISK')

   * Different default values

   * Different distribution key settings

*Note `ndb_restore': mysql-cluster-programs-ndb-restore. supports
limited _attribute promotion_ in much the same way that it is supported
by MySQL replication; that is, data backed up from a column of a given
type can generally be restored to a column using a `larger, similar'
type. For example, data from a `CHAR(20)' column can be restored to a
column declared as `VARCHAR(20)', `VARCHAR(30)', or `CHAR(30)'; data
from a *Note `MEDIUMINT': integer-types. column can be restored to a
column of type *Note `INT': integer-types. or *Note `BIGINT':
integer-types. See *Note replication-features-different-data-types::,
for a table of type conversions currently supported by attribute
promotion.

Attribute promotion by *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. must be enabled explicitly, as
follows:

  1. Prepare the table to which the backup is to be restored.  *Note
     `ndb_restore': mysql-cluster-programs-ndb-restore. cannot be used
     to re-create the table with a different definition from the
     original; this means that you must either create the table
     manually, or alter the columns which you wish to promote using
     *Note `ALTER TABLE': alter-table. after restoring the table
     metadata but before restoring the data.

  2. Invoke *Note `ndb_restore': mysql-cluster-programs-ndb-restore.
     with the `--promote-attributes' option (short form `-A') when
     restoring the table data. Attribute promotion does not occur if
     this option is not used; instead, the restore operation fails with
     an error.

`--lossy-conversions', `-L'

Options for lossy-conversions

*Command-Line Format*  `--lossy-conversions'        
                       `-L'            
                       *Permitted        
                       Values*         
*Type*                 `boolean'        
*Default*              `FALSE'         

This option is intended to complement the `--promote-attributes' option.
Using `--lossy-conversions' allows lossy conversions of column values
(type demotions or changes in sign) when restoring data from backup.
With some exceptions, the rules governing demotion are the same as for
MySQL replication; see *Note
replication-features-different-data-types::, for information about
specific type conversions currently supported by attribute demotion.

*Note `ndb_restore': mysql-cluster-programs-ndb-restore. reports any
truncation of data that it performs during lossy conversions once per
attribute and column.

The `--preserve-trailing-spaces' option (short form `-R') causes
trailing spaces to be preserved when promoting a fixed-width character
data type to its variable-width equivalent--that is, when promoting a
*Note `CHAR': char. column value to *Note `VARCHAR': char. or a
`BINARY' column value to *Note `VARBINARY': binary-varbinary.
Otherwise, any trailing spaces are dropped from such column values when
they are inserted into the new columns.

*Note*:

Although you can promote *Note `CHAR': char.  columns to *Note
`VARCHAR': char. and `BINARY' columns to *Note `VARBINARY':
binary-varbinary, you cannot promote *Note `VARCHAR': char. columns to
*Note `CHAR': char. or *Note `VARBINARY': binary-varbinary. columns to
`BINARY'.

The `-b' option is used to specify the ID or sequence number of the
backup, and is the same number shown by the management client in the
`Backup BACKUP_ID completed' message displayed upon completion of a
backup. (See *Note mysql-cluster-backup-using-management-client::.)

*Important*:

When restoring cluster backups, you must be sure to restore all data
nodes from backups having the same backup ID. Using files from
different backups will at best result in restoring the cluster to an
inconsistent state, and may fail altogether.

`--restore_epoch' (short form: `-e') adds (or restores) epoch
information to the cluster replication status table. This is useful for
starting replication on a MySQL Cluster replication slave. When this
option is used, the row in the `mysql.ndb_apply_status' having `0' in
the `id' column is updated if it already exists; such a row is inserted
if it does not already exist. (See *Note
mysql-cluster-replication-backups::.)

`--restore_data'

This option causes *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. to output *Note `NDB':
mysql-cluster. table data and logs.

`--restore_meta'

This option causes *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. to print *Note `NDB':
mysql-cluster. table metadata. Generally, you need only use this option
when restoring the first data node of a cluster; additional data nodes
can obtain the metadata from the first one.

`--restore-privilege-tables'

*Note `ndb_restore': mysql-cluster-programs-ndb-restore. does not by
default restore distributed MySQL privilege tables (MySQL Cluster NDB
7.2.0 and later). This option causes *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. to restore the privilege tables.

This works only if the privilege tables were converted to *Note `NDB':
mysql-cluster. before the backup was taken.  For more information, see
*Note mysql-cluster-privilege-distribution::.

`--backup_path'

The path to the backup directory is required; this is supplied to *Note
`ndb_restore': mysql-cluster-programs-ndb-restore. using the
`--backup_path' option, and must include the subdirectory corresponding
to the ID backup of the backup to be restored. For example, if the data
node's `DataDir' is `/var/lib/mysql-cluster', then the backup directory
is `/var/lib/mysql-cluster/BACKUP', and the backup files for the backup
with the ID 3 can be found in `/var/lib/mysql-cluster/BACKUP/BACKUP-3'.
The path may be absolute or relative to the directory in which the
*Note `ndb_restore': mysql-cluster-programs-ndb-restore. executable is
located, and may be optionally prefixed with `backup_path='.

It is possible to restore a backup to a database with a different
configuration than it was created from. For example, suppose that a
backup with backup ID `12', created in a cluster with two database
nodes having the node IDs `2' and `3', is to be restored to a cluster
with four nodes. Then *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. must be run twice--once for each
database node in the cluster where the backup was taken.  However,
*Note `ndb_restore': mysql-cluster-programs-ndb-restore. cannot always
restore backups made from a cluster running one version of MySQL to a
cluster running a different MySQL version. See *Note
mysql-cluster-upgrade-downgrade::, for more information.

*Important*:

It is not possible to restore a backup made from a newer version of
MySQL Cluster using an older version of *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. You can restore a backup made from
a newer version of MySQL to an older cluster, but you must use a copy
of *Note `ndb_restore': mysql-cluster-programs-ndb-restore. from the
newer MySQL Cluster version to do so.

For example, to restore a cluster backup taken from a cluster running
MySQL Cluster NDB 7.2.5 to a cluster running MySQL Cluster NDB 7.1.21,
you must use the *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. that comes with the MySQL Cluster
NDB 7.2.5 distribution.

For more rapid restoration, the data may be restored in parallel,
provided that there is a sufficient number of cluster connections
available. That is, when restoring to multiple nodes in parallel, you
must have an `[api]' or `[mysqld]' section in the cluster `config.ini'
file available for each concurrent *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. process. However, the data files
must always be applied before the logs.

`--no-upgrade'

When using *Note `ndb_restore': mysql-cluster-programs-ndb-restore. to
restore a backup, *Note `VARCHAR': char. columns created using the old
fixed format are resized and recreated using the variable-width format
now employed. This behavior can be overridden using the `--no-upgrade'
option (short form: `-u') when running *Note `ndb_restore':
mysql-cluster-programs-ndb-restore.

`--print_data'

The `--print_data' option causes *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. to direct its output to `stdout'.

*Note `TEXT': blob. and *Note `BLOB': blob. column values are always
truncated to the first 256 bytes in the output; this cannot currently
be overridden when using `--print_data'.

Several additional options are available for use with the
`--print_data' option in generating data dumps, either to `stdout', or
to a file. These are similar to some of the options used with *Note
`mysqldump': mysqldump, and are shown in the following list:

   *  `--tab', `-T'

     Options for tab

     *Command-Line        `--tab=path'        
     Format*                              
                          `-T'            

     This option causes `--print_data' to create dump files, one per
     table, each named `TBL_NAME.txt'.  It requires as its argument the
     path to the directory where the files should be saved; use `.' for
     the current directory.

   *  `--fields-enclosed-by=STRING'

     Options for fields-enclosed-by

     *Command-Line        `--fields-enclosed-by=char'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `'              

     Each column values are enclosed by the string passed to this
     option (regardless of data type; see next item).

   *  `--fields-optionally-enclosed-by=STRING'

     Options for fields-optionally-enclosed-by

     *Command-Line        `--fields-optionally-enclosed-by'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `'              

     The string passed to this option is used to enclose column values
     containing character data (such as *Note `CHAR': char, *Note
     `VARCHAR': char, *Note `BINARY': binary-varbinary, *Note `TEXT':
     blob, or *Note `ENUM': enum.).

   *  `--fields-terminated-by=STRING'

     Options for fields-terminated-by

     *Command-Line        `--fields-terminated-by=char'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `\t             
                          (tab)'          

     The string passed to this option is used to separate column
     values. The default value is a tab character (`\t').

   *  `--hex'

     Options for hex

     *Command-Line        `--hex'         
     Format*                              

     If this option is used, all binary values are output in
     hexadecimal format.

   *  `--fields-terminated-by=STRING'

     Options for fields-terminated-by

     *Command-Line        `--fields-terminated-by=char'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `\t             
                          (tab)'          

     This option specifies the string used to end each line of output.
     The default is a linefeed character (`\n').

   *  `--append'

     Options for append

     *Command-Line        `--append'        
     Format*                              

     When used with the `--tab' and `--print_data' options, this causes
     the data to be appended to any existing files having the same
     names.

*Note*:

If a table has no explicit primary key, then the output generated when
using the `--print_data' option includes the table's hidden primary key.

`--print_meta'

This option causes *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. to print all metadata to `stdout'.

`--print_log'

The `--print_log' option causes *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. to output its log to `stdout'.

`--print'

Causes *Note `ndb_restore': mysql-cluster-programs-ndb-restore. to
print all data, metadata, and logs to `stdout'. Equivalent to using the
`--print_data', `--print_meta', and `--print_log' options together.

*Note*:

Use of `--print' or any of the `--print_*' options is in effect
performing a dry run. Including one or more of these options causes any
output to be redirected to `stdout'; in such cases, *Note
`ndb_restore': mysql-cluster-programs-ndb-restore. makes no attempt to
restore data or metadata to a MySQL Cluster.

`--dont_ignore_systab_0'

Normally, when restoring table data and metadata, *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. ignores the copy of the *Note
`NDB': mysql-cluster. system table that is present in the backup.
`--dont_ignore_systab_0' causes the system table to be restored. _This
option is intended for experimental and development use only, and is not
recommended in a production environment_.

`--ndb-nodegroup-map', `-z'

This option can be used to restore a backup taken from one node group
to a different node group. Its argument is a list of the form
`SOURCE_NODE_GROUP, TARGET_NODE_GROUP'.

`--no-binlog'

This option prevents any connected SQL nodes from writing data restored
by *Note `ndb_restore': mysql-cluster-programs-ndb-restore. to their
binary logs.

`--no-restore-disk-objects', `-d'

This option stops *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. from restoring any MySQL Cluster
Disk Data objects, such as tablespaces and log file groups; see *Note
mysql-cluster-disk-data::, for more information about these.

`--parallelism=#', `-p'

Determines the maximum number of parallel transactions that *Note
`ndb_restore': mysql-cluster-programs-ndb-restore. tries to use. By
default, this is 128; the minimum is 1, and the maximum is 1024.

`--progress-frequency=N'

Print a status report each N seconds while the backup is in progress. 0
(the default) causes no status reports to be printed. The maximum is
65535.

`--verbose=#'

Sets the level for the verbosity of the output. The minimum is 0; the
maximum is 255. The default value is 1.

It is possible to restore only selected databases, or selected tables
from a single database, using the syntax shown here:

     ndb_restore OTHER_OPTIONS DB_NAME,[DB_NAME[,...] | TBL_NAME[,TBL_NAME][,...]]

In other words, you can specify either of the following to be restored:

   * All tables from one or more databases

   * One or more tables from a single database

`--include-databases=DB_NAME[,DB_NAME][,...]'

Options for include-databases

*Command-Line Format*  `--include-databases=db-list'        
                       *Permitted        
                       Values*         
*Type*                 `string'        
*Default*              `'              

`--include-tables=DB_NAME.TBL_NAME[,DB_NAME.TBL_NAME][,...]'

Options for include-tables

*Command-Line Format*  `--include-tables=table-list'        
                       *Permitted        
                       Values*         
*Type*                 `string'        
*Default*              `'              

Use the `--include-databases' option or the `--include-tables' option
for restoring only specific databases or tables, respectively.
`--include-databases' takes a comma-delimited list of databases to be
restored.  `--include-tables' takes a comma-delimited list of tables (in
`DATABASE.TABLE' format) to be restored.

When `--include-databases' or `--include-tables' is used, only those
databases or tables named by the option are restored; all other
databases and tables are excluded by *Note `ndb_restore':
mysql-cluster-programs-ndb-restore, and are not restored.

The following table shows several invocations of *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. using `--include-*' options (other
options possibly required have been omitted for clarity), and the
effects these have on restoring from a MySQL Cluster backup:

This table shows several invocations of *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. using `--include-*' options, and
the effects these have on restoring from a MySQL Cluster backup.

Option Used                          Result
`--include-databases=db1'            Only tables in database `db1' are
                                     restored; all tables in all other
                                     databases are ignored
`--include-databases=db1,db2' (or    Only tables in databases `db1' and
`--include-databases=db1'            `db2' are restored; all tables in
`--include-databases=db2')           all other databases are ignored
`--include-tables=db1.t1'            Only table `t1' in database `db1' is
                                     restored; no other tables in `db1'
                                     or in any other database are
                                     restored
`--include-tables=db1.t2,db2.t1' (or Only the table `t2' in database
`--include-tables=db1.t2'            `db1' and the table `t1' in database
`--include-tables=db2.t1')           `db2' are restored; no other tables
                                     in `db1', `db2', or any other
                                     database are restored

You can also use these two options together. For example, the following
causes all tables in databases `db1' and `db2', together with the tables
`t1' and `t2' in database `db3', to be restored (and no other databases
or tables):

     shell> ndb_restore [...] --include-databases=db1,db2 --include-tables=db3.t1,db3.t2

(Again we have omitted other, possibly required, options in the example
just shown.)

`--exclude-databases=DB_NAME[,DB_NAME][,...]'

Options for exclude-databases

*Command-Line Format*  `--exclude-databases=db-list'        
                       *Permitted        
                       Values*         
*Type*                 `string'        
*Default*              `'              

`--exclude-tables=DB_NAME.TBL_NAME[,DB_NAME.TBL_NAME][,...]'

Options for exclude-tables

*Command-Line Format*  `--exclude-tables=table-list'        
                       *Permitted        
                       Values*         
*Type*                 `string'        
*Default*              `'              

It is possible to prevent one or more databases or tables from being
restored using the *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. options `--exclude-databases' and
`--exclude-tables'.  `--exclude-databases' takes a comma-delimited list
of one or more databases which should not be restored.
`--exclude-tables' takes a comma-delimited list of one or more tables
(using `DATABASE.TABLE' format) which should not be restored.

When `--exclude-databases' or `--exclude-tables' is used, only those
databases or tables named by the option are excluded; all other
databases and tables are restored by *Note `ndb_restore':
mysql-cluster-programs-ndb-restore.

This table shows several invocations of *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. usng `--exclude-*' options (other
options possibly required have been omitted for clarity), and the
effects these options have on restoring from a MySQL Cluster backup:

This table shows several invocations of *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. using `--exclude-*' options, and
the effects these options have on restoring from a MySQL Cluster backup.

Option Used                          Result
`--exclude-databases=db1'            All tables in all databases except
                                     `db1' are restored; no tables in
                                     `db1' are restored
`--exclude-databases=db1,db2' (or    All tables in all databases except
`--exclude-databases=db1'            `db1' and `db2' are restored; no
`--exclude-databases=db2')           tables in `db1' or `db2' are
                                     restored
`--exclude-tables=db1.t1'            All tables except `t1' in database
                                     `db1' are restored; all other
                                     tables in `db1' are restored; all
                                     tables in all other databases are
                                     restored
`--exclude-tables=db1.t2,db2.t1' (or All tables in database `db1' except
`--exclude-tables=db1.t2'            for `t2' and all tables in database
`--exclude-tables=db2.t1)'           `db2' except for table `t1' are
                                     restored; no other tables in `db1'
                                     or `db2' are restored; all tables
                                     in all other databases are restored

You can use these two options together. For example, the following
causes all tables in all databases _except for_ databases `db1' and
`db2', along with the tables `t1' and `t2' in database `db3', _not_ to
be restored:

     shell> ndb_restore [...] --exclude-databases=db1,db2 --exclude-tables=db3.t1,db3.t2

(Again, we have omitted other possibly necessary options in the
interest of clarity and brevity from the example just shown.)

You can use `--include-*' and `--exclude-*' options together, subject
to the following rules:

   * The actions of all `--include-*' and `--exclude-*' options are
     cumulative.

   * All `--include-*' and `--exclude-*' options are evaluated in the
     order passed to ndb_restore, from right to left.

   * In the event of conflicting options, the first (rightmost) option
     takes precedence. In other words, the first option (going from
     right to left) that matches against a given database or table
     `wins'.

For example, the following set of options causes *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. to restore all tables from database
`db1' except `db1.t1', while restoring no other tables from any other
databases:


     --include-databases=db1 --exclude-tables=db1.t1

However, reversing the order of the options just given simply causes
all tables from database `db1' to be restored (including `db1.t1', but
no tables from any other database), because the `--include-databases'
option, being farthest to the right, is the first match against database
`db1' and thus takes precedence over any other option that matches
`db1' or any tables in `db1':


     --exclude-tables=db1.t1 --include-databases=db1

`--exclude-missing-columns'

Options for exclude-missing-columns

*Command-Line Format*  `--exclude-missing-columns'        

It is also possible to restore only selected table columns using the
`--exclude-missing-columns' option. When this option is used, *Note
`ndb_restore': mysql-cluster-programs-ndb-restore. ignores any columns
missing from tables being restored as compared to the versions of those
tables found in the backup. This option applies to all tables being
restored. If you wish to apply this option only to selected tables or
databases, you can use it in combination with one or more of the
options described in the previous paragraph to do so, then restore data
to the remaining tables using a complementary set of these options.

`--disable-indexes'

Options for disable-indexes

*Command-Line Format*  `--disable-indexes'        

Disable restoration of indexes during restoration of the data from a
native NDB backup. Afterwards, you can restore indexes for all tables
at once with multi-threaded building of indexes using
`--rebuild-indexes', which should be faster than rebuilding indexes
concurrently for very large tables.

`--rebuild-indexes'

Options for rebuild-indexes

*Command-Line Format*  `--rebuild-indexes'        

You can use this option with *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. to cause multi-threaded rebuilding
of the ordered indexes while restoring a native `NDB' backup.

`--skip-broken-objects'

Options for skip-broken-objects

*Command-Line Format*  `--skip-broken-objects'        

This option causes *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. to ignore corrupt tables while
reading a native *Note `NDB': mysql-cluster. backup, and to continue
restoring any remaining tables (that are not also corrupted).
Currently, the `--skip-broken-objects' option works only in the case of
missing blob parts tables.

`--skip-unknown-objects'

Options for skip-unknown-objects

*Command-Line Format*  `--skip-unknown-objects'        

This option causes *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. to ignore any schema objects it
does not recognize while reading a native *Note `NDB': mysql-cluster.
backup. This can be used for restoring a backup made from a cluster
running MySQL Cluster NDB 7.2 to a cluster running MySQL Cluster NDB
7.1.

`--rewrite-database=OLD_DBNAME,NEW_DBNAME'

Options for rewrite-database

*Command-Line Format*  `--rewrite-database=olddb,newdb'        
                       *Permitted        
                       Values*         
*Type*                 `string'        
*Default*              `none'          

This option makes it possible to restore to a database having a
different name from that used in the backup. For example, if a backup
is made of a database named `products', you can restore the data it
contains to a database named `inventory', use this option as shown here
(omitting any other options that might be required):

     shell> ndb_restore --rewrite-database=product,inventory

The option can be employed multiple times in a single invocation of
*Note `ndb_restore': mysql-cluster-programs-ndb-restore. Thus it is
possible to restore simultaneously from a database named `db1' to a
database named `db2' and from a database named `db3' to one named `db4'
using `--rewrite-database=db1,db2 --rewrite-database=db3,db4'. Other
*Note `ndb_restore': mysql-cluster-programs-ndb-restore. options may be
used between multiple occurrences of `--rewrite-database'.

In the event of conflicts between multiple `--rewrite-database'
options, the last `--rewrite-database' option used, reading from left
to right, is the one that takes effect. For example, if
`--rewrite-database=db1,db2 --rewrite-database=db1,db3' is used, only
`--rewrite-database=db1,db3' is honored, and
`--rewrite-database=db1,db2' is ignored. It is also possible to restore
from multiple databases to a single database, so that
`--rewrite-database=db1,db3 --rewrite-database=db2,db3' restores all
tables and data from databases `db1' and `db2' into database `db3'.

*Important*:

When restoring from multiple backup databases into a single target
database using `--rewrite-database', no check is made for collisions
between table or other object names, and the order in which rows are
restored is not guaranteed. This means that it is possible in such
cases for rows to be overwritten and updates to be lost.

Error reporting

*Note `ndb_restore': mysql-cluster-programs-ndb-restore. reports both
temporary and permanent errors. In the case of temporary errors, it may
able to recover from them, and reports `Restore successful, but
encountered temporary error, please look at configuration' in such
cases.

*Important*:

After using *Note `ndb_restore': mysql-cluster-programs-ndb-restore. to
initialize a MySQL Cluster for use in circular replication, binary logs
on the SQL node acting as the replication slave are not automatically
created, and you must cause them to be created manually. To cause the
binary logs to be created, issue a *Note `SHOW TABLES': show-tables.
statement on that SQL node before running *Note `START SLAVE':
start-slave. This is a known issue in MySQL Cluster.


File: manual.info,  Node: mysql-cluster-programs-ndb-select-all,  Next: mysql-cluster-programs-ndb-select-count,  Prev: mysql-cluster-programs-ndb-restore,  Up: mysql-cluster-programs

17.4.20 `ndb_select_all' -- Print Rows from an NDB Table
--------------------------------------------------------

*Note `ndb_select_all': mysql-cluster-programs-ndb-select-all. prints
all rows from an *Note `NDB': mysql-cluster. table to `stdout'.

* Usage *

     ndb_select_all -c CONNECT_STRING TBL_NAME -d DB_NAME [> FILE_NAME]

The following table includes options that are specific to the MySQL
Cluster native backup restoration program *Note `ndb_select_all':
mysql-cluster-programs-ndb-select-all. Additional descriptions follow
the table. For options common to most MySQL Cluster programs (including
*Note `ndb_select_all': mysql-cluster-programs-ndb-select-all.), see
*Note mysql-cluster-program-options-common::.

*`ndb_select_all' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note
`ndb_select_all': mysql-cluster-programs-ndb-select-all. program

Format                           Description               Added /
                                                           Removed
`--database=dbname',             Name of the database in   All MySQL 5.5
                                 which the table is found  based releases
` -d '                                                     
`--parallelism=#',               Degree of parallelism     All MySQL 5.5
                                                           based releases
` -p '                                                     
`--lock=#',                      Lock type                 All MySQL 5.5
                                                           based releases
` -l '                                                     
`--order=index',                 Sort resultset according  All MySQL 5.5
                                 to index whose name is    based releases
` -o '                           supplied                  
`--descending',                  Sort resultset in         All MySQL 5.5
                                 descending order          based releases
` -z '                           (requires order flag)     
`--header',                      Print header (set to      All MySQL 5.5
                                 0|FALSE to disable        based releases
` -h '                           headers in output)        
`--useHexFormat',                Output numbers in         All MySQL 5.5
                                 hexadecimal format        based releases
` -x '                                                     
`--delimiter=char',              Set a column delimiter    All MySQL 5.5
                                                           based releases
` -D '                                                     
` --disk '                       Print disk references     All MySQL 5.5
                                 (useful only for Disk     based releases
                                 Data tables having        
                                 nonindexed columns)       
` --rowid '                      Print rowid               All MySQL 5.5
                                                           based releases
` --gci '                        Include GCI in output     All MySQL 5.5
                                                           based releases
`--tup',                         Scan in tup order         All MySQL 5.5
                                                           based releases
` -t '                                                     
` --nodata '                     Do not print table        All MySQL 5.5
                                 column data               based releases

   *  `--database=DBNAME', `-d' DBNAME

     Name of the database in which the table is found. The default
     value is `TEST_DB'.

   *  `parallelism=#', `-p' #

     Specifies the degree of parallelism.

   *  `--lock=LOCK_TYPE', `-l LOCK_TYPE'

     Employs a lock when reading the table. Possible values for
     LOCK_TYPE are:

        * `0': Read lock

        * `1': Read lock with hold

        * `2': Exclusive read lock

     There is no default value for this option.

   *  `--order=INDEX_NAME', `-o INDEX_NAME'

     Orders the output according to the index named INDEX_NAME. Note
     that this is the name of an index, not of a column, and that the
     index must have been explicitly named when created.

   *  `--descending', `-z'

     Sorts the output in descending order. This option can be used only
     in conjunction with the `-o' (`--order') option.

   *  `--header=FALSE'

     Excludes column headers from the output.

   *  `--useHexFormat' `-x'

     Causes all numeric values to be displayed in hexadecimal format.
     This does not affect the output of numerals contained in strings
     or datetime values.

   *  `--delimiter=CHARACTER', `-D CHARACTER'

     Causes the CHARACTER to be used as a column delimiter. Only table
     data columns are separated by this delimiter.

     The default delimiter is the tab character.

   *  `--disk'

     Adds a disk reference column to the output. The column is nonempty
     only for Disk Data tables having nonindexed columns.

   *  `--rowid'

     Adds a `ROWID' column providing information about the fragments in
     which rows are stored.

   *  `--gci'

     Adds a column to the output showing the global checkpoint at which
     each row was last updated. See *Note mysql-cluster-overview::, and
     *Note mysql-cluster-log-events::, for more information about
     checkpoints.

   *  `--tupscan', `-t'

     Scan the table in the order of the tuples.

   *  `--nodata'

     Causes any table data to be omitted.

* Sample Output *

Output from a MySQL *Note `SELECT': select.  statement:

     mysql> SELECT * FROM ctest1.fish;
     +----+-----------+
     | id | name      |
     +----+-----------+
     |  3 | shark     |
     |  6 | puffer    |
     |  2 | tuna      |
     |  4 | manta ray |
     |  5 | grouper   |
     |  1 | guppy     |
     +----+-----------+
     6 rows in set (0.04 sec)

Output from the equivalent invocation of *Note `ndb_select_all':
mysql-cluster-programs-ndb-select-all.:

     shell> ./ndb_select_all -c localhost fish -d ctest1
     id      name
     3       [shark]
     6       [puffer]
     2       [tuna]
     4       [manta ray]
     5       [grouper]
     1       [guppy]
     6 rows returned

     NDBT_ProgramExit: 0 - OK

Note that all string values are enclosed by square brackets
(``['...`]'') in the output of *Note `ndb_select_all':
mysql-cluster-programs-ndb-select-all. For a further example, consider
the table created and populated as shown here:

     CREATE TABLE dogs (
         id INT(11) NOT NULL AUTO_INCREMENT,
         name VARCHAR(25) NOT NULL,
         breed VARCHAR(50) NOT NULL,
         PRIMARY KEY pk (id),
         KEY ix (name)
     )
     TABLESPACE ts STORAGE DISK
     ENGINE=NDBCLUSTER;

     INSERT INTO dogs VALUES
         ('', 'Lassie', 'collie'),
         ('', 'Scooby-Doo', 'Great Dane'),
         ('', 'Rin-Tin-Tin', 'Alsatian'),
         ('', 'Rosscoe', 'Mutt');

This demonstrates the use of several additional *Note `ndb_select_all':
mysql-cluster-programs-ndb-select-all. options:

     shell> ./ndb_select_all -d ctest1 dogs -o ix -z --gci --disk
     GCI     id name          breed        DISK_REF
     834461  2  [Scooby-Doo]  [Great Dane] [ m_file_no: 0 m_page: 98 m_page_idx: 0 ]
     834878  4  [Rosscoe]     [Mutt]       [ m_file_no: 0 m_page: 98 m_page_idx: 16 ]
     834463  3  [Rin-Tin-Tin] [Alsatian]   [ m_file_no: 0 m_page: 34 m_page_idx: 0 ]
     835657  1  [Lassie]      [Collie]     [ m_file_no: 0 m_page: 66 m_page_idx: 0 ]
     4 rows returned

     NDBT_ProgramExit: 0 - OK


File: manual.info,  Node: mysql-cluster-programs-ndb-select-count,  Next: mysql-cluster-programs-ndb-show-tables,  Prev: mysql-cluster-programs-ndb-select-all,  Up: mysql-cluster-programs

17.4.21 `ndb_select_count' -- Print Row Counts for NDB Tables
-------------------------------------------------------------

*Note `ndb_select_count': mysql-cluster-programs-ndb-select-count.
prints the number of rows in one or more *Note `NDB': mysql-cluster.
tables. With a single table, the result is equivalent to that obtained
by using the MySQL statement `SELECT COUNT(*) FROM TBL_NAME'.

* Usage *

     ndb_select_count [-c CONNECT_STRING] -dDB_NAME TBL_NAME[, TBL_NAME2[, ...]]

The following table includes options that are specific to the MySQL
Cluster native backup restoration program *Note `ndb_select_count':
mysql-cluster-programs-ndb-select-count. Additional descriptions follow
the table. For options common to most MySQL Cluster programs (including
*Note `ndb_select_count': mysql-cluster-programs-ndb-select-count.), see
*Note mysql-cluster-program-options-common::.

*`ndb_select_count' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note
`ndb_select_count': mysql-cluster-programs-ndb-select-count. program

Format                           Description               Added /
                                                           Removed
`--database=dbname',             Name of the database in   All MySQL 5.5
                                 which the table is found  based releases
`-d'                                                       
`--parallelism=#',               Degree of parallelism     All MySQL 5.5
                                                           based releases
`-p'                                                       
`--lock=#',                      Lock type                 All MySQL 5.5
                                                           based releases
`-l'                                                       

You can obtain row counts from multiple tables in the same database by
listing the table names separated by spaces when invoking this command,
as shown under *Sample Output*.

* Sample Output *

     shell> ./ndb_select_count -c localhost -d ctest1 fish dogs
     6 records in table fish
     4 records in table dogs

     NDBT_ProgramExit: 0 - OK


File: manual.info,  Node: mysql-cluster-programs-ndb-show-tables,  Next: mysql-cluster-programs-ndb-size-pl,  Prev: mysql-cluster-programs-ndb-select-count,  Up: mysql-cluster-programs

17.4.22 `ndb_show_tables' -- Display List of NDB Tables
-------------------------------------------------------

*Note `ndb_show_tables': mysql-cluster-programs-ndb-show-tables.
displays a list of all *Note `NDB': mysql-cluster. database objects in
the cluster. By default, this includes not only both user-created
tables and *Note `NDB': mysql-cluster. system tables, but *Note `NDB':
mysql-cluster.-specific indexes, internal triggers, and MySQL Cluster
Disk Data objects as well.

The following table includes options that are specific to the MySQL
Cluster native backup restoration program *Note `ndb_show_tables':
mysql-cluster-programs-ndb-show-tables. Additional descriptions follow
the table. For options common to most MySQL Cluster programs (including
*Note `ndb_show_tables': mysql-cluster-programs-ndb-show-tables.), see
*Note mysql-cluster-program-options-common::.

*`ndb_show_tables' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note
`ndb_show_tables': mysql-cluster-programs-ndb-show-tables. program

Format                           Description               Added /
                                                           Removed
`--database=string',             Specifies the database    All MySQL 5.5
                                 in which the table is     based releases
` -d '                           found                     
`--loops=#',                     Number of times to        All MySQL 5.5
                                 repeat output             based releases
` -l '                                                     
`--type=#',                      Limit output to objects   All MySQL 5.5
                                 of this type              based releases
` -t '                                                     
`--unqualified',                 Do not qualify table      All MySQL 5.5
                                 names                     based releases
` -u '                                                     
`--parsable',                    Return output suitable    All MySQL 5.5
                                 for MySQL LOAD DATA       based releases
` -p '                           INFILE statement          
` --show-temp-status '           Show table temporary flag All MySQL 5.5
                                                           based releases

* Usage *

     ndb_show_tables [-c CONNECT_STRING]

   *  `--database', `-d'

     Specifies the name of the database in which the tables are found.

   *  `--loops', `-l'

     Specifies the number of times the utility should execute.  This is
     1 when this option is not specified, but if you do use the option,
     you must supply an integer argument for it.

   *  `--parsable', `-p'

     Using this option causes the output to be in a format suitable for
     use with *Note `LOAD DATA INFILE': load-data.

   *  `--show-temp-status'

     If specified, this causes temporary tables to be displayed.

   *  `--type', `-t'

     Can be used to restrict the output to one type of object,
     specified by an integer type code as shown here:

        * `1': System table

        * `2': User-created table

        * `3': Unique hash index

     Any other value causes all *Note `NDB': mysql-cluster.  database
     objects to be listed (the default).

   *  `--unqualified', `-u'

     If specified, this causes unqualified object names to be displayed.

*Note*:

Only user-created MySQL Cluster tables may be accessed from MySQL;
system tables such as `SYSTAB_0' are not visible to *Note `mysqld':
mysqld. However, you can examine the contents of system tables using
*Note `NDB': mysql-cluster. API applications such as *Note
`ndb_select_all': mysql-cluster-programs-ndb-select-all. (see *Note
mysql-cluster-programs-ndb-select-all::).


File: manual.info,  Node: mysql-cluster-programs-ndb-size-pl,  Next: mysql-cluster-programs-ndb-waiter,  Prev: mysql-cluster-programs-ndb-show-tables,  Up: mysql-cluster-programs

17.4.23 `ndb_size.pl' -- NDBCLUSTER Size Requirement Estimator
--------------------------------------------------------------

This is a Perl script that can be used to estimate the amount of space
that would be required by a MySQL database if it were converted to use
the *Note `NDBCLUSTER': mysql-cluster.  storage engine. Unlike the
other utilities discussed in this section, it does not require access
to a MySQL Cluster (in fact, there is no reason for it to do so).
However, it does need to access the MySQL server on which the database
to be tested resides.

* Requirements *

   * A running MySQL server. The server instance does not have to
     provide support for MySQL Cluster.

   * A working installation of Perl.

   * The `DBI' module, which can be obtained from CPAN if it is not
     already part of your Perl installation. (Many Linux and other
     operating system distributions provide their own packages for this
     library.)

   * A MySQL user account having the necessary privileges. If you do
     not wish to use an existing account, then creating one using
     `GRANT USAGE ON DB_NAME.*'--where DB_NAME is the name of the
     database to be examined--is sufficient for this purpose.

`ndb_size.pl' can also be found in the MySQL sources in
`storage/ndb/tools'.

The following table includes options that are specific to the MySQL
Cluster program *Note `ndb_size.pl':
mysql-cluster-programs-ndb-size-pl. Additional descriptions follow the
table. For options common to most MySQL Cluster programs (including
*Note `ndb_size.pl': mysql-cluster-programs-ndb-size-pl.), see *Note
mysql-cluster-program-options-common::.

*`ndb_size.pl' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note `ndb_size.pl':
mysql-cluster-programs-ndb-size-pl. program

Format                           Description               Added /
                                                           Removed
` --database=dbname '            The database or           All MySQL 5.5
                                 databases to examine;     based releases
                                 accepts a                 
                                 comma-delimited list;     
                                 the default is ALL (use   
                                 all databases found on    
                                 the server)               
` --hostname[:port] '            Specify host and          All MySQL 5.5
                                 optional port as          based releases
                                 host[:port]               
` --socket=file '                Specify a socket to       All MySQL 5.5
                                 connect to                based releases
` --user=string '                Specify a MySQL user name All MySQL 5.5
                                                           based releases
` --password=string '            Specify a MySQL user      All MySQL 5.5
                                 password                  based releases
` --format=string '              Set output format (text   All MySQL 5.5
                                 or HTML)                  based releases
` --excludetables=tbl_list '     Skip any tables in a      All MySQL 5.5
                                 comma-separated list of   based releases
                                 tables                    
` --excludedbs=db_list '         Skip any databases in a   All MySQL 5.5
                                 comma-separated list of   based releases
                                 databases                 
` --savequeries=file '           Saves all queries to the  All MySQL 5.5
                                 database into the file    based releases
                                 specified                 
` --loadqueries=file '           Loads all queries from    All MySQL 5.5
                                 the file specified; does  based releases
                                 not connect to a database 
` --real_table_name=table '      Designates a table to     All MySQL 5.5
                                 handle unique index size  based releases
                                 calculations              

* Usage *

     perl ndb_size.pl [--database={DB_NAME|ALL}] [--hostname=HOST[:PORT]] [--socket=SOCKET] \
           [--user=USER] [--password=PASSWORD]  \
           [--help|-h] [--format={html|text}] \
           [--loadqueries=FILE_NAME] [--savequeries=FILE_NAME]

By default, this utility attempts to analyze all databases on the
server. You can specify a single database using the `--database'
option; the default behavior can be made explicit by using `ALL' for
the name of the database. You can also exclude one or more databases by
using the `--excludedbs' option with a comma-separated list of the
names of the databases to be skipped. Similarly, you can cause specific
tables to be skipped by listing their names, separated by commas,
following the optional `--excludetables' option. A host name can be
specified using `--hostname'; the default is `localhost'. In MySQL
Cluster NDB 7.2.6 and later, you can specify a port in addition to the
host using HOST:PORT format for the value of `--hostname'. The default
port number is 3306. If necessary, you can also specify a socket; the
default is `/var/lib/mysql.sock'.  A MySQL user name and password can
be specified the corresponding options shown. It also possible to
control the format of the output using the `--format' option; this can
take either of the values `html' or `text', with `text' being the
default. An example of the text output is shown here:

     shell> ndb_size.pl --database=test --socket=/tmp/mysql.sock
     ndb_size.pl report for database: 'test' (1 tables)
     --------------------------------------------------
     Connected to: DBI:mysql:host=localhost;mysql_socket=/tmp/mysql.sock

     Including information for versions: 4.1, 5.0, 5.1

     test.t1
     -------

     DataMemory for Columns (* means varsized DataMemory):
              Column Name            Type  Varsized   Key  4.1  5.0   5.1
          HIDDEN_NDB_PKEY          bigint             PRI    8    8     8
                       c2     varchar(50)         Y         52   52    4*
                       c1         int(11)                    4    4     4
                                                            --   --    --
     Fixed Size Columns DM/Row                              64   64    12
        Varsize Columns DM/Row                               0    0     4

     DataMemory for Indexes:
        Index Name                 Type        4.1        5.0        5.1
           PRIMARY                BTREE         16         16         16
                                                --         --         --
            Total Index DM/Row                  16         16         16

     IndexMemory for Indexes:
                    Index Name        4.1        5.0        5.1
                       PRIMARY         33         16         16
                                       --         --         --
                Indexes IM/Row         33         16         16

     Summary (for THIS table):
                                      4.1        5.0        5.1
         Fixed Overhead DM/Row         12         12         16
                NULL Bytes/Row          4          4          4
                DataMemory/Row         96         96         48
                         (Includes overhead, bitmap and indexes)

       Varsize Overhead DM/Row          0          0          8
        Varsize NULL Bytes/Row          0          0          4
            Avg Varside DM/Row          0          0         16

                      No. Rows          0          0          0

             Rows/32kb DM Page        340        340        680
     Fixedsize DataMemory (KB)          0          0          0

     Rows/32kb Varsize DM Page          0          0       2040
       Varsize DataMemory (KB)          0          0          0

              Rows/8kb IM Page        248        512        512
              IndexMemory (KB)          0          0          0

     Parameter Minimum Requirements
     ------------------------------
     * indicates greater than default

                     Parameter     Default        4.1         5.0         5.1
               DataMemory (KB)       81920          0           0           0
            NoOfOrderedIndexes         128          1           1           1
                    NoOfTables         128          1           1           1
              IndexMemory (KB)       18432          0           0           0
         NoOfUniqueHashIndexes          64          0           0           0
                NoOfAttributes        1000          3           3           3
                  NoOfTriggers         768          5           5           5

For debugging purposes, the Perl arrays containing the queries run by
this script can be read from the file specified using can be saved to a
file using `--savequeries'; a file containing such arrays to be read in
during script execution can be specified using `--loadqueries'. Neither
of these options has a default value.

To produce output in HTML format, use the `--format' option and
redirect the output to a file, as shown here:

     shell> ndb_size.pl --database=test --socket=/tmp/mysql.sock --format=html > ndb_size.html

(Without the redirection, the output is sent to `stdout'.)

The output from this script includes the following information:

   * Minimum values for the `DataMemory', `IndexMemory',
     `MaxNoOfTables', `MaxNoOfAttributes', `MaxNoOfOrderedIndexes',
     `MaxNoOfUniqueHashIndexes', and `MaxNoOfTriggers' configuration
     parameters required to accommodate the tables analyzed.

   * Memory requirements for all of the tables, attributes, ordered
     indexes, and unique hash indexes defined in the database.

   * The `IndexMemory' and `DataMemory' required per table and table
     row.


File: manual.info,  Node: mysql-cluster-programs-ndb-waiter,  Next: mysql-cluster-program-options-common,  Prev: mysql-cluster-programs-ndb-size-pl,  Up: mysql-cluster-programs

17.4.24 `ndb_waiter' -- Wait for MySQL Cluster to Reach a Given Status
----------------------------------------------------------------------

*Note `ndb_waiter': mysql-cluster-programs-ndb-waiter. repeatedly (each
100 milliseconds) prints out the status of all cluster data nodes until
either the cluster reaches a given status or the `--timeout' limit is
exceeded, then exits. By default, it waits for the cluster to achieve
`STARTED' status, in which all nodes have started and connected to the
cluster. This can be overridden using the `--no-contact' and
`--not-started' options.

The node states reported by this utility are as follows:

   * `NO_CONTACT': The node cannot be contacted.

   * `UNKNOWN': The node can be contacted, but its status is not yet
     known. Usually, this means that the node has received a `START' or
     `RESTART' command from the management server, but has not yet
     acted on it.

   * `NOT_STARTED': The node has stopped, but remains in contact with
     the cluster. This is seen when restarting the node using the
     management client's `RESTART' command.

   * `STARTING': The node's *Note `ndbd': mysql-cluster-programs-ndbd.
     process has started, but the node has not yet joined the cluster.

   * `STARTED': The node is operational, and has joined the cluster.

   * `SHUTTING_DOWN': The node is shutting down.

   * `SINGLE USER MODE': This is shown for all cluster data nodes when
     the cluster is in single user mode.

The following table includes options that are specific to the MySQL
Cluster native backup restoration program *Note `ndb_waiter':
mysql-cluster-programs-ndb-waiter. Additional descriptions follow the
table. For options common to most MySQL Cluster programs (including
*Note `ndb_waiter': mysql-cluster-programs-ndb-waiter.), see *Note
mysql-cluster-program-options-common::.

*`ndb_waiter' Options and Variables: MySQL Cluster NDB 7.2*

This table describes command-line options for the *Note `ndb_waiter':
mysql-cluster-programs-ndb-waiter. program

Format                           Description               Added /
                                                           Removed
`--no-contact',                  Wait for cluster to       All MySQL 5.5
                                 reach NO CONTACT state    based releases
` -n '                                                     
` --not-started '                Wait for cluster to       All MySQL 5.5
                                 reach NOT STARTED state   based releases
` --single-user '                Wait for cluster to       All MySQL 5.5
                                 enter single user mode    based releases
`--timeout=#',                   Wait this many seconds,   All MySQL 5.5
                                 then exit whether or not  based releases
` -t '                           cluster has reached       
                                 desired state; default    
                                 is 2 minutes (120         
                                 seconds)                  
` --nowait-nodes=list '          List of nodes not to be   All MySQL 5.5
                                 waited for.               based releases
`--wait-nodes=list',             List of nodes to be       All MySQL 5.5
                                 waited for.               based releases
` -w '                                                     

* Usage *

     ndb_waiter [-c CONNECT_STRING]

* Additional Options *

   *  `--no-contact', `-n'

     Instead of waiting for the `STARTED' state, *Note `ndb_waiter':
     mysql-cluster-programs-ndb-waiter. continues running until the
     cluster reaches `NO_CONTACT' status before exiting.

   *  `--not-started'

     Instead of waiting for the `STARTED' state, *Note `ndb_waiter':
     mysql-cluster-programs-ndb-waiter. continues running until the
     cluster reaches `NOT_STARTED' status before exiting.

   *  `--timeout=SECONDS', `-t SECONDS'

     Time to wait. The program exits if the desired state is not
     achieved within this number of seconds. The default is 120 seconds
     (1200 reporting cycles).

   *  `--single-user'

     The program waits for the cluster to enter single user mode.

   *  `--nowait-nodes=LIST'

     When this option is used, ndb_waiter does not wait for the nodes
     whose IDs are listed. The list is comma-delimited; ranges can be
     indicated by dashes, as shown here:

          shell> ndb_waiter --nowait-nodes=1,3,7-9

     *Important*:

     Do _not_ use this option together with the `--wait-nodes' option.

   *  `--wait-nodes=LIST', `-w LIST'

     When this option is used, *Note `ndb_waiter':
     mysql-cluster-programs-ndb-waiter.  waits only for the nodes whose
     IDs are listed. The list is comma-delimited; ranges can be
     indicated by dashes, as shown here:

          shell> ndb_waiter --wait-nodes=2,4-6,10

     *Important*:

     Do _not_ use this option together with the `--nowait-nodes' option.

Sample Output

Shown here is the output from *Note `ndb_waiter':
mysql-cluster-programs-ndb-waiter.  when run against a 4-node cluster
in which two nodes have been shut down and then started again manually.
Duplicate reports (indicated by ``...'') are omitted.

     shell> ./ndb_waiter -c localhost

     Connecting to mgmsrv at (localhost)
     State node 1 STARTED
     State node 2 NO_CONTACT
     State node 3 STARTED
     State node 4 NO_CONTACT
     Waiting for cluster enter state STARTED

     ...

     State node 1 STARTED
     State node 2 UNKNOWN
     State node 3 STARTED
     State node 4 NO_CONTACT
     Waiting for cluster enter state STARTED

     ...

     State node 1 STARTED
     State node 2 STARTING
     State node 3 STARTED
     State node 4 NO_CONTACT
     Waiting for cluster enter state STARTED

     ...

     State node 1 STARTED
     State node 2 STARTING
     State node 3 STARTED
     State node 4 UNKNOWN
     Waiting for cluster enter state STARTED

     ...

     State node 1 STARTED
     State node 2 STARTING
     State node 3 STARTED
     State node 4 STARTING
     Waiting for cluster enter state STARTED

     ...

     State node 1 STARTED
     State node 2 STARTED
     State node 3 STARTED
     State node 4 STARTING
     Waiting for cluster enter state STARTED

     ...

     State node 1 STARTED
     State node 2 STARTED
     State node 3 STARTED
     State node 4 STARTED
     Waiting for cluster enter state STARTED

     NDBT_ProgramExit: 0 - OK

*Note*:

If no connection string is specified, then *Note `ndb_waiter':
mysql-cluster-programs-ndb-waiter. tries to connect to a management on
`localhost', and reports `Connecting to mgmsrv at (null)'.


File: manual.info,  Node: mysql-cluster-program-options-common,  Prev: mysql-cluster-programs-ndb-waiter,  Up: mysql-cluster-programs

17.4.25 Options Common to MySQL Cluster Programs -- Options Common to MySQL Cluster Programs
--------------------------------------------------------------------------------------------

All MySQL Cluster programs accept the options described in this
section, with the following exceptions:

   * *Note `mysqld': mysqld.

   * *Note `ndb_print_backup_file':
     mysql-cluster-programs-ndb-print-backup-file.

   * *Note `ndb_print_schema_file':
     mysql-cluster-programs-ndb-print-schema-file.

   * *Note `ndb_print_sys_file':
     mysql-cluster-programs-ndb-print-sys-file.

Users of earlier MySQL Cluster versions should note that some of these
options have been changed to make them consistent with one another as
well as with *Note `mysqld': mysqld. You can use the `--help' option
with any MySQL Cluster program--with the exception of *Note
`ndb_print_backup_file': mysql-cluster-programs-ndb-print-backup-file,
*Note `ndb_print_schema_file':
mysql-cluster-programs-ndb-print-schema-file, and *Note
`ndb_print_sys_file': mysql-cluster-programs-ndb-print-sys-file.--to
view a list of the options which the program supports.

The options in the following table are common to all MySQL Cluster
executables (except those noted previously in this section).

*Common MySQL Cluster Program Options and Variables: MySQL Cluster NDB
7.2*

This table describes command-line options common to all MySQL Cluster
programs

Format                           Description               Added /
                                                           Removed
`--help',                        Display help message and  All MySQL 5.5
                                 exit                      based releases
`--usage',                                                 
                                                           
` -?  '                                                    
`--ndb-connectstring=connectstring',Set connection string     All MySQL 5.5
                                 for connecting to         based releases
`--connect-string=connectstring',ndb_mgmd. Syntax:         
                                 [nodeid=<id>;][host=]<hostname>[:<port>].
` -c '                           Overrides entries         
                                 specified in              
                                 NDB_CONNECTSTRING or      
                                 my.cnf.                   
` --ndb-mgmd-host=host[:port] '  Set the host (and port,   All MySQL 5.5
                                 if desired) for           based releases
                                 connecting to the         
                                 management server         
` --ndb-nodeid=# '               Set node id for this node All MySQL 5.5
                                                           based releases
` --ndb-optimized-node-selection Select nodes for          All MySQL 5.5
'                                transactions in a more    based releases
                                 optimal way               
` --character-sets-dir=path '    Directory where           All MySQL 5.5
                                 character sets are        based releases
` --debug=options '              Enable output from debug  All MySQL 5.5
                                 calls. Can be used only   based releases
                                 for versions compiled     
                                 with debugging enabled    
` --core-file '                  Write core on errors      All MySQL 5.5
                                 (defaults to TRUE in      based releases
                                 debug builds)             
`--version',                     Output version            All MySQL 5.5
                                 information and exit      based releases
` -V '                                                     

For options specific to individual MySQL Cluster programs, see *Note
mysql-cluster-programs::.

See *Note mysql-cluster-program-options-mysqld::, for *Note `mysqld':
mysqld. options relating to MySQL Cluster.

   *  `--help', `--usage', `-?'

     Options for help

     *Command-Line        `--help'        
     Format*                              
                          `--usage'        
                          `-?'            

     Prints a short list with descriptions of the available command
     options.

   *  `--character-sets-dir=NAME'

     Options for character-sets-dir

     *Command-Line        `--character-sets-dir=path'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `file           
                          name'           
     *Default*            `'              

     Tells the program where to find character set information.

   *  `--ndb-connectstring=CONNECT_STRING',
     `--connect-string=CONNECT_STRING', `-c CONNECT_STRING'

     Options for ndb-connectstring

     *Command-Line        `--ndb-connectstring=connectstring'        
     Format*                              
                          `--connect-string=connectstring'        
                          `-c'            
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `localhost:1186'        

     This option takes a MySQL Cluster connection string that specifies
     the management server for the application to connect to, as shown
     here:

          shell> ndbd --ndb-connectstring="nodeid=2;host=ndb_mgmd.mysql.com:1186"

     For more information, see *Note mysql-cluster-connection-strings::.

   *  `--core-file'

     Options for core-file

     *Command-Line        `--core-file'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `FALSE'         

     Write a core file if the program dies. The name and location of
     the core file are system-dependent. (For MySQL Cluster programs
     nodes running on Linux, the default location is the program's
     working directory--for a data node, this is the node's `DataDir'.)
     For some systems, there may be restrictions or limitations; for
     example, it might be necessary to execute `ulimit -c unlimited'
     before starting the server. Consult your system documentation for
     detailed information.

     If MySQL Cluster was built using the `--debug' option for
     `configure', then `--core-file' is enabled by default. For regular
     builds, `--core-file' is disabled by default.

   *  `--debug[=OPTIONS]'

     Options for debug

     *Command-Line        `--debug=options'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `d:t:O,/tmp/ndb_restore.trace'        

     This option can be used only for versions compiled with debugging
     enabled. It is used to enable output from debug calls in the same
     manner as for the *Note `mysqld': mysqld. process.

   *  `--ndb-mgmd-host=HOST[:PORT]'

     Options for ndb-mgmd-host

     *Command-Line        `--ndb-mgmd-host=host[:port]'        
     Format*                              
     *Option-File Format* `ndb-mgmd-host'        
                          *Permitted        
                          Values*         
     *Type*               `string'        
     *Default*            `localhost:1186'        

     Can be used to set the host and port number of a single management
     server for the program to connect to. If the program requires node
     IDs or references to multiple management servers (or both) in its
     connection information, use the `--ndb-connectstring' option
     instead.

   *  `--ndb-nodeid=#'

     Options for ndb-nodeid

     *Command-Line        `--ndb-nodeid=#'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `0'             

     Sets this node's MySQL Cluster node ID. _The range of permitted
     values depends on the node's type (data, management, or API) and
     the MySQL Cluster software version_. See *Note
     mysql-cluster-limitations-limits::, for more information.

   *  `--ndb-optimized-node-selection'

     Options for ndb-optimized-node-selection

     *Command-Line        `--ndb-optimized-node-selection'        
     Format*                              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `TRUE'          

     Optimize selection of nodes for transactions. Enabled by default.

   *  `--version', `-V'

     Options for version

     *Command-Line        `--version'        
     Format*                              
                          `-V'            

     Prints the MySQL Cluster version number of the executable.  The
     version number is relevant because not all versions can be used
     together, and the MySQL Cluster startup process verifies that the
     versions of the binaries being used can co-exist in the same
     cluster. This is also important when performing an online
     (rolling) software upgrade or downgrade of MySQL Cluster.

     See *Note mysql-cluster-rolling-restart::), for more information.


File: manual.info,  Node: mysql-cluster-management,  Next: mysql-cluster-replication,  Prev: mysql-cluster-programs,  Up: mysql-cluster

17.5 Management of MySQL Cluster
================================

* Menu:

* mysql-cluster-start-phases::   Summary of MySQL Cluster Start Phases
* mysql-cluster-mgm-client-commands::  Commands in the MySQL Cluster Management Client
* mysql-cluster-backup::         Online Backup of MySQL Cluster
* mysql-cluster-mysqld::         MySQL Server Usage for MySQL Cluster
* mysql-cluster-rolling-restart::  Performing a Rolling Restart of a MySQL Cluster
* mysql-cluster-event-reports::  Event Reports Generated in MySQL Cluster
* mysql-cluster-logs-ndb-messages::  MySQL Cluster Log Messages
* mysql-cluster-single-user-mode::  MySQL Cluster Single User Mode
* mysql-cluster-sql-statements::  Quick Reference: MySQL Cluster SQL Statements
* mysql-cluster-ndbinfo::        The `ndbinfo' MySQL Cluster Information Database
* mysql-cluster-security::       MySQL Cluster Security Issues
* mysql-cluster-disk-data::      MySQL Cluster Disk Data Tables
* mysql-cluster-online-add-node::  Adding MySQL Cluster Data Nodes Online
* mysql-cluster-privilege-distribution::  Distributed MySQL Privileges for MySQL Cluster
* mysql-cluster-ndb-api-statistics::  NDB API Statistics Counters and Variables

Managing a MySQL Cluster involves a number of tasks, the first of which
is to configure and start MySQL Cluster. This is covered in *Note
mysql-cluster-configuration::, and *Note mysql-cluster-programs::.

The next few sections cover the management of a running MySQL Cluster.

For information about security issues relating to management and
deployment of a MySQL Cluster, see *Note mysql-cluster-security::.

There are essentially two methods of actively managing a running MySQL
Cluster. The first of these is through the use of commands entered into
the management client whereby cluster status can be checked, log levels
changed, backups started and stopped, and nodes stopped and started.
The second method involves studying the contents of the cluster log
`ndb_NODE_ID_cluster.log'; this is usually found in the management
server's `DataDir' directory, but this location can be overridden using
the `LogDestination' option.  (Recall that NODE_ID represents the
unique identifier of the node whose activity is being logged.) The
cluster log contains event reports generated by *Note `ndbd':
mysql-cluster-programs-ndbd. It is also possible to send cluster log
entries to a Unix system log.

Some aspects of the cluster's operation can be also be monitored from
an SQL node using the *Note `SHOW ENGINE NDB STATUS': show-engine.
statement.

More detailed information about MySQL Cluster operations is available
in real time through an SQL interface using the *Note `ndbinfo':
mysql-cluster-ndbinfo. database. For more information, see *Note
mysql-cluster-ndbinfo::.

NDB statistics counters provide improved monitoring using the *Note
`mysql': mysql. client. These counters, implemented in the NDB kernel,
relate to operations performed by or affecting `Ndb'
(http://dev.mysql.com/doc/ndbapi/en/ndb-ndb.html) objects, such as
starting, closing, and aborting transactions; primary key and unique key
operations; table, range, and pruned scans; blocked threads waiting for
various operations to complete; and data and events sent and received
by MySQL Cluster. The counters are incremented by the NDB kernel
whenever NDB API calls are made or data is sent to or received by the
data nodes.

*Note `mysqld': mysqld. exposes the NDB API statistics counters as
system status variables, which can be identified from the prefix common
to all of their names (`Ndb_api_'). The values of these variables can
be read in the *Note `mysql': mysql. client from the output of a *Note
`SHOW STATUS': show-status. statement, or by querying either the *Note
`SESSION_STATUS': status-table. table or the *Note `GLOBAL_STATUS':
status-table.  table (in the `INFORMATION_SCHEMA' database). By
comparing the values of the status variables before and after the
execution of an SQL statement that acts on *Note `NDB': mysql-cluster.
tables, you can observe the actions taken on the NDB API level that
correspond to this statement, which can be beneficial for monitoring
and performance tuning of MySQL Cluster.

MySQL Enterprise Monitor can also be used to monitor MySQL Servers that
are part of a MySQL Cluster deployment. MySQL Enterprise Monitor 2.3,
added a MySQL Cluster advisor, including a set of graphs providing
information on MySQL Cluster resources, and defining rules for alerts
on key information from data nodes such as `DataMemory' usage. This
information is made available to MySQL Enterprise Monitor 2.3 or later
by any MySQL Server which is connected to the MySQL Cluster, using
*Note `ndbinfo': mysql-cluster-ndbinfo. The advisor could be run
against a single MySQL Server in the Cluster, or against a pair in
order to provide a higher level of availability for the monitoring
service. For more information, see the `MySQL Enterprise Monitor 2.3
Manual' (http://dev.mysql.com/doc/mysql-monitor/2.3/en/index.html).

MySQL Cluster Manager provides an advanced command-line interface that
simplifies many otherwise complex MySQL Cluster management tasks, such
as starting, stopping, or restarting a MySQL Cluster with a large
number of nodes. The MySQL Cluster Manager client also supports
commands for getting and setting the values of most node configuration
parameters as well as *Note `mysqld': mysqld. server options and
variables relating to MySQL Cluster. MySQL Cluster Manager 1.1 provides
support for adding data nodes online. See the `MySQL Cluster Manager
1.1 User Manual'
(http://dev.mysql.com/doc/mysql-cluster-manager/1.1/en/), for more
information.


File: manual.info,  Node: mysql-cluster-start-phases,  Next: mysql-cluster-mgm-client-commands,  Prev: mysql-cluster-management,  Up: mysql-cluster-management

17.5.1 Summary of MySQL Cluster Start Phases
--------------------------------------------

This section provides a simplified outline of the steps involved when
MySQL Cluster data nodes are started. More complete information can be
found in MySQL Cluster Start Phases
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals-start-phases.html),
in the ``NDB' Internals Guide'.

These phases are the same as those reported in the output from the
`NODE_ID STATUS' command in the management client (see *Note
mysql-cluster-mgm-client-commands::). These start phases are also
reported in the `start_phase' column of the *Note `ndbinfo.nodes':
mysql-cluster-ndbinfo-nodes.  table.

Start types

There are several different startup types and modes, as shown in the
following list:

   * Initial start

     The cluster starts with a clean file system on all data nodes.
     This occurs either when the cluster started for the very first
     time, or when all data nodes are restarted using the `--initial'
     option.

     *Note*:

     Disk Data files are not removed when restarting a node using
     `--initial'.

   * System restart

     The cluster starts and reads data stored in the data nodes.  This
     occurs when the cluster has been shut down after having been in
     use, when it is desired for the cluster to resume operations from
     the point where it left off.

   * Node restart

     This is the online restart of a cluster node while the cluster
     itself is running.

   * Initial node restart

     This is the same as a node restart, except that the node is
     reinitialized and started with a clean file system.

Setup and initialization (phase -1)

Prior to startup, each data node (*Note `ndbd':
mysql-cluster-programs-ndbd.  process) must be initialized.
Initialization consists of the following steps:

  1. Obtain a node ID

  2. Fetch configuration data

  3. Allocate ports to be used for inter-node communications

  4. Allocate memory according to settings obtained from the
     configuration file

When a data node or SQL node first connects to the management node, it
reserves a cluster node ID. To make sure that no other node allocates
the same node ID, this ID is retained until the node has managed to
connect to the cluster and at least one *Note `ndbd':
mysql-cluster-programs-ndbd. reports that this node is connected. This
retention of the node ID is guarded by the connection between the node
in question and *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd.

After each data node has been initialized, the cluster startup process
can proceed. The stages which the cluster goes through during this
process are listed here:

   * Phase 0

     The `NDBFS' and `NDBCNTR' blocks start (see `NDB' Kernel Blocks
     (http://dev.mysql.com/doc/ndbapi/en/ndb-internals-kernel-blocks.html)).
     Data node file systems are cleared on those data nodes that were
     started with `--initial' option.

   * Phase 1

     In this stage, all remaining *Note `NDB': mysql-cluster. kernel
     blocks are started.  MySQL Cluster connections are set up,
     inter-block communications are established, and heartbeats are
     started.  In the case of a node restart, API node connections are
     also checked.

     *Note*:

     When one or more nodes hang in Phase 1 while the remaining node or
     nodes hang in Phase 2, this often indicates network problems. One
     possible cause of such issues is one or more cluster hosts having
     multiple network interfaces. Another common source of problems
     causing this condition is the blocking of TCP/IP ports needed for
     communications between cluster nodes. In the latter case, this is
     often due to a misconfigured firewall.

   * Phase 2

     The `NDBCNTR' kernel block checks the states of all existing
     nodes. The master node is chosen, and the cluster schema file is
     initialized.

   * Phase 3

     The `DBLQH' and `DBTC' kernel blocks set up communications between
     them. The startup type is determined; if this is a restart, the
     `DBDIH' block obtains permission to perform the restart.

   * Phase 4

     For an initial start or initial node restart, the redo log files
     are created. The number of these files is equal to
     `NoOfFragmentLogFiles'.

     For a system restart:

        * Read schema or schemas.

        * Read data from the local checkpoint.

        * Apply all redo information until the latest restorable global
          checkpoint has been reached.

     For a node restart, find the tail of the redo log.

   * Phase 5

     Most of the database-related portion of a data node start is
     performed during this phase. For an initial start or system
     restart, a local checkpoint is executed, followed by a global
     checkpoint. Periodic checks of memory usage begin during this
     phase, and any required node takeovers are performed.

   * Phase 6

     In this phase, node groups are defined and set up.

   * Phase 7

     The arbitrator node is selected and begins to function. The next
     backup ID is set, as is the backup disk write speed.  Nodes
     reaching this start phase are marked as `Started'. It is now
     possible for API nodes (including SQL nodes) to connect to the
     cluster.

   * Phase 8

     If this is a system restart, all indexes are rebuilt (by `DBDIH').

   * Phase 9

     The node internal startup variables are reset.

   * Phase 100 (_OBSOLETE_)

     Formerly, it was at this point during a node restart or initial
     node restart that API nodes could connect to the node and begin to
     receive events. Currently, this phase is empty.

   * Phase 101

     At this point in a node restart or initial node restart, event
     delivery is handed over to the node joining the cluster. The
     newly-joined node takes over responsibility for delivering its
     primary data to subscribers. This phase is also referred to as
     _`SUMA' handover phase_.

After this process is completed for an initial start or system restart,
transaction handling is enabled. For a node restart or initial node
restart, completion of the startup process means that the node may now
act as a transaction coordinator.


File: manual.info,  Node: mysql-cluster-mgm-client-commands,  Next: mysql-cluster-backup,  Prev: mysql-cluster-start-phases,  Up: mysql-cluster-management

17.5.2 Commands in the MySQL Cluster Management Client
------------------------------------------------------

In addition to the central configuration file, a cluster may also be
controlled through a command-line interface available through the
management client *Note `ndb_mgm': mysql-cluster-programs-ndb-mgm. This
is the primary administrative interface to a running cluster.

Commands for the event logs are given in *Note
mysql-cluster-event-reports::; commands for creating backups and
restoring from them are provided in *Note mysql-cluster-backup::.

Using `ndb_mgm' with MySQL Cluster Manager

MySQL Cluster Manager handles starting and stopping processes and
tracks their states internally, so it is not necessary to use *Note
`ndb_mgm': mysql-cluster-programs-ndb-mgm. for these tasks for a MySQL
Cluster that is under MySQL Cluster Manager control. it is recommended
_not_ to use the *Note `ndb_mgm': mysql-cluster-programs-ndb-mgm.
command-line client that comes with the MySQL Cluster distribution to
perform operations that involve starting or stopping nodes. These
include but are not limited to the `START', `STOP', `RESTART', and
`SHUTDOWN' commands. For more information, see MySQL Cluster Manager
Process Commands
(http://dev.mysql.com/doc/cluster-manager/en/mcm-process-commands.html).

The management client has the following basic commands. In the listing
that follows, NODE_ID denotes either a database node ID or the keyword
`ALL', which indicates that the command should be applied to all of the
cluster's data nodes.

   * `HELP'

     Displays information on all available commands.

   * `SHOW'

     Displays information on the cluster's status. Possible node status
     values include `UNKNOWN', `NO_CONTACT', `NOT_STARTED', `STARTING',
     `STARTED', `SHUTTING_DOWN', and `RESTARTING'. The output from this
     command also indicates when the cluster is in single user mode
     (status `SINGLE USER MODE').

   * `NODE_ID START'

     Brings online the data node identified by NODE_ID (or all data
     nodes).

     `ALL START' works on all data nodes only, and does not affect
     management nodes.

     *Important*:

     To use this command to bring a data node online, the data node
     must have been started using *Note `ndbd `--nostart'':
     mysql-cluster-programs-ndbd. or *Note `ndbd `-n'':
     mysql-cluster-programs-ndbd.

   * `NODE_ID STOP [-a] [-f]'

     Stops the data or management node identified by NODE_ID. Note that
     `ALL STOP' works to stop all data nodes only, and does not affect
     management nodes.

     A node affected by this command disconnects from the cluster, and
     its associated *Note `ndbd': mysql-cluster-programs-ndbd. or *Note
     `ndb_mgmd': mysql-cluster-programs-ndb-mgmd. process terminates.

     The `-a' option causes the node to be stopped immediately, without
     waiting for the completion of any pending transactions.

     Normally, `STOP' fails if the result would cause an incomplete
     cluster. The `-f' option forces the node to shut down without
     checking for this. If this option is used and the result is an
     incomplete cluster, the cluster immediately shuts down.

     *Warning*:

     Use of the `-a' option also disables the safety check otherwise
     performed when `STOP' is invoked to insure that stopping the node
     does not cause an incomplete cluster. In other words, you should
     exercise extreme care when using the `-a' option with the `STOP'
     command, due to the fact that this option makes it possible for
     the cluster to undergo a forced shutdown because it no longer has
     a complete copy of all data stored in *Note `NDB': mysql-cluster.

   * `NODE_ID RESTART [-n] [-i] [-a] [-f]'

     Restarts the data node identified by NODE_ID (or all data nodes).

     Using the `-i' option with `RESTART' causes the data node to
     perform an initial restart; that is, the node's file system is
     deleted and recreated. The effect is the same as that obtained from
     stopping the data node process and then starting it again using
     *Note `ndbd `--initial'': mysql-cluster-programs-ndbd. from the
     system shell. Note that backup files and Disk Data files are not
     removed when this option is used.

     Using the `-n' option causes the data node process to be
     restarted, but the data node is not actually brought online until
     the appropriate `START' command is issued. The effect of this
     option is the same as that obtained from stopping the data node
     and then starting it again using *Note `ndbd `--nostart'':
     mysql-cluster-programs-ndbd. or *Note `ndbd `-n'':
     mysql-cluster-programs-ndbd. from the system shell.

     Using the `-a' causes all current transactions relying on this
     node to be aborted. No GCP check is done when the node rejoins the
     cluster.

     Normally, `RESTART' fails if taking the node offline would result
     in an incomplete cluster. The `-f' option forces the node to
     restart without checking for this. If this option is used and the
     result is an incomplete cluster, the entire cluster is restarted.

   * `NODE_ID STATUS'

     Displays status information for the data node identified by
     NODE_ID (or for all data nodes).

     The output from this command also indicates when the cluster is in
     single user mode.

   * `NODE_ID REPORT REPORT-TYPE'

     Displays a report of type REPORT-TYPE for the data node identified
     by NODE_ID, or for all data nodes using `ALL'.

     Currently, there are two accepted values for REPORT-TYPE:

        * `BackupStatus' provides a status report on a cluster backup
          in progress

        * `MemoryUsage' displays how much data memory and index memory
          is being used by each data node as shown in this example:

               ndb_mgm> ALL REPORT MEMORY

               Node 1: Data usage is 5%(177 32K pages of total 3200)
               Node 1: Index usage is 0%(108 8K pages of total 12832)
               Node 2: Data usage is 5%(177 32K pages of total 3200)
               Node 2: Index usage is 0%(108 8K pages of total 12832)

          This information is also available from the *Note
          `ndbinfo.memoryusage': mysql-cluster-ndbinfo-memoryusage.
          table.

     REPORT-TYPE is case-insensitive and `fuzzy'; for `MemoryUsage', you
     can use `MEMORY' (as shown in the prior example), `memory', or
     even simply `MEM' (or `mem'). You can abbreviate `BackupStatus' in
     a similar fashion.

     Prior to MySQL Cluster NDB 7.2.10, `ALL REPORT BackupStatus' did
     not work correctly with multi-threaded data nodes. (Bug #15908907)

   * `ENTER SINGLE USER MODE NODE_ID'

     Enters single user mode, whereby only the MySQL server identified
     by the node ID NODE_ID is permitted to access the database.

     Currently, it is not possible for data nodes to join a MySQL
     Cluster while it is running in single user mode. (Bug #20395)

   * `EXIT SINGLE USER MODE'

     Exits single user mode, enabling all SQL nodes (that is, all
     running *Note `mysqld': mysqld. processes) to access the database.

     *Note*:

     It is possible to use `EXIT SINGLE USER MODE' even when not in
     single user mode, although the command has no effect in this case.

   * `QUIT', `EXIT'

     Terminates the management client.

     This command does not affect any nodes connected to the cluster.

   * `SHUTDOWN'

     Shuts down all cluster data nodes and management nodes. To exit
     the management client after this has been done, use `EXIT' or
     `QUIT'.

     This command does _not_ shut down any SQL nodes or API nodes that
     are connected to the cluster.

   * `CREATE NODEGROUP NODEID[, NODEID, ...]'

     Creates a new MySQL Cluster node group and causes data nodes to
     join it.

     This command is used after adding new data nodes online to a MySQL
     Cluster, and causes them to join a new node group and thus to
     begin participating fully in the cluster. The command takes as its
     sole parameter a comma-separated list of node IDs--these are the
     IDs of the nodes just added and started that are to join the new
     node group. The number of nodes must be the same as the number of
     nodes in each node group that is already part of the cluster (each
     MySQL Cluster node group must have the same number of nodes). In
     other words, if the MySQL Cluster has 2 node groups of 2 data nodes
     each, then the new node group must also have 2 data nodes.

     The node group ID of the new node group created by this command is
     determined automatically, and always the next highest unused node
     group ID in the cluster; it is not possible to set it manually.

     For more information, see *Note mysql-cluster-online-add-node::.

   * `DROP NODEGROUP NODEGROUP_ID'

     Drops the MySQL Cluster node group with the given NODEGROUP_ID.

     This command can be used to drop a node group from a MySQL
     Cluster. `DROP NODEGROUP' takes as its sole argument the node
     group ID of the node group to be dropped.

     `DROP NODEGROUP' acts only to remove the data nodes in the
     effected node group from that node group. It does not stop data
     nodes, assign them to a different node group, or remove them from
     the cluster's configuration. A data node that does not belong to a
     node group is indicated in the output of the management client
     `SHOW' command with `no nodegroup' in place of the node group ID,
     like this (indicated using bold text):

          id=3    @10.100.2.67  (5.5.33-ndb-7.2.14, *no nodegroup*)

     Prior to MySQL Cluster NDB 7.0.4, the `SHOW' output was not
     updated correctly following `DROP NODEGROUP'.  (Bug #43413)

     `DROP NODEGROUP' works only when all data nodes in the node group
     to be dropped are completely empty of any table data and table
     definitions. Since there is currently no way using *Note
     `ndb_mgm': mysql-cluster-programs-ndb-mgm. or the *Note `mysql':
     mysql. client to remove all data from a specific data node or node
     group, this means that the command succeeds only in the two
     following cases:

       1. After issuing `CREATE NODEGROUP' in the *Note `ndb_mgm':
          mysql-cluster-programs-ndb-mgm. client, but before issuing any
          *Note `ALTER ONLINE TABLE ... REORGANIZE PARTITION':
          alter-table. statements in the *Note `mysql': mysql. client.

       2. After dropping all *Note `NDBCLUSTER': mysql-cluster.  tables
          using *Note `DROP TABLE': drop-table.

          *Note `TRUNCATE TABLE': truncate-table. does not work for
          this purpose because this removes only the table data; the
          data nodes continue to store an *Note `NDBCLUSTER':
          mysql-cluster. table's definition until a *Note `DROP TABLE':
          drop-table. statement is issued that causes the table
          metadata to be dropped.

     For more information about `DROP NODEGROUP', see *Note
     mysql-cluster-online-add-node::.


File: manual.info,  Node: mysql-cluster-backup,  Next: mysql-cluster-mysqld,  Prev: mysql-cluster-mgm-client-commands,  Up: mysql-cluster-management

17.5.3 Online Backup of MySQL Cluster
-------------------------------------

* Menu:

* mysql-cluster-backup-concepts::  MySQL Cluster Backup Concepts
* mysql-cluster-backup-using-management-client::  Using The MySQL Cluster Management Client to Create a Backup
* mysql-cluster-backup-configuration::  Configuration for MySQL Cluster Backups
* mysql-cluster-backup-troubleshooting::  MySQL Cluster Backup Troubleshooting

The next few sections describe how to prepare for and then to create a
MySQL Cluster backup using the functionality for this purpose found in
the *Note `ndb_mgm': mysql-cluster-programs-ndb-mgm. management client.
To distinguish this type of backup from a backup made using *Note
`mysqldump': mysqldump, we sometimes refer to it as a `native' MySQL
Cluster backup. (For information about the creation of backups with
*Note `mysqldump': mysqldump, see *Note mysqldump::.) Restoration of
MySQL Cluster backups is done using the *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. utility provided with the MySQL
Cluster distribution; for information about *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. and its use in restoring MySQL
Cluster backups, see *Note mysql-cluster-programs-ndb-restore::.


File: manual.info,  Node: mysql-cluster-backup-concepts,  Next: mysql-cluster-backup-using-management-client,  Prev: mysql-cluster-backup,  Up: mysql-cluster-backup

17.5.3.1 MySQL Cluster Backup Concepts
......................................

A backup is a snapshot of the database at a given time. The backup
consists of three main parts:

   * Metadata

     The names and definitions of all database tables

   * Table records

     The data actually stored in the database tables at the time that
     the backup was made

   * Transaction log

     A sequential record telling how and when data was stored in the
     database

Each of these parts is saved on all nodes participating in the backup.
During backup, each node saves these three parts into three files on
disk:

   * `BACKUP-BACKUP_ID.NODE_ID.ctl'

     A control file containing control information and metadata.  Each
     node saves the same table definitions (for all tables in the
     cluster) to its own version of this file.

   * `BACKUP-BACKUP_ID-0.NODE_ID.data'

     A data file containing the table records, which are saved on a
     per-fragment basis. That is, different nodes save different
     fragments during the backup. The file saved by each node starts
     with a header that states the tables to which the records belong.
     Following the list of records there is a footer containing a
     checksum for all records.

   * `BACKUP-BACKUP_ID.NODE_ID.log'

     A log file containing records of committed transactions.  Only
     transactions on tables stored in the backup are stored in the log.
     Nodes involved in the backup save different records because
     different nodes host different database fragments.

In the listing above, BACKUP_ID stands for the backup identifier and
NODE_ID is the unique identifier for the node creating the file.


File: manual.info,  Node: mysql-cluster-backup-using-management-client,  Next: mysql-cluster-backup-configuration,  Prev: mysql-cluster-backup-concepts,  Up: mysql-cluster-backup

17.5.3.2 Using The MySQL Cluster Management Client to Create a Backup
.....................................................................

Before starting a backup, make sure that the cluster is properly
configured for performing one. (See *Note
mysql-cluster-backup-configuration::.)

The `START BACKUP' command is used to create a backup:

     START BACKUP [BACKUP_ID] [WAIT_OPTION] [SNAPSHOT_OPTION]

     WAIT_OPTION:
     WAIT {STARTED | COMPLETED} | NOWAIT

     SNAPSHOT_OPTION:
     SNAPSHOTSTART | SNAPSHOTEND

Successive backups are automatically identified sequentially, so the
BACKUP_ID, an integer greater than or equal to 1, is optional; if it is
omitted, the next available value is used. If an existing BACKUP_ID
value is used, the backup fails with the error `Backup failed: file
already exists'. If used, the BACKUP_ID must follow `START BACKUP'
immediately, before any other options are used.

The WAIT_OPTION can be used to determine when control is returned to
the management client after a `START BACKUP' command is issued, as
shown in the following list:

   * If `NOWAIT' is specified, the management client displays a prompt
     immediately, as seen here:

          ndb_mgm> START BACKUP NOWAIT
          ndb_mgm>

     In this case, the management client can be used even while it
     prints progress information from the backup process.

   * With `WAIT STARTED' the management client waits until the backup
     has started before returning control to the user, as shown here:

          ndb_mgm> START BACKUP WAIT STARTED
          Waiting for started, this may take several minutes
          Node 2: Backup 3 started from node 1
          ndb_mgm>

   * WAIT COMPLETED causes the management client to wait until the
     backup process is complete before returning control to the user.

`WAIT COMPLETED' is the default.

A SNAPSHOT_OPTION can be used to determine whether the backup matches
the state of the cluster when `START BACKUP' was issued, or when it was
completed. `SNAPSHOTSTART' causes the backup to match the state of the
cluster when the backup began; `SNAPSHOTEND' causes the backup to
reflect the state of the cluster when the backup was finished.
`SNAPSHOTEND' is the default, and matches the behavior found in
previous MySQL Cluster releases.

*Note*:

If you use the `SNAPSHOTSTART' option with `START BACKUP', and the
`CompressedBackup' parameter is enabled, only the data and control
files are compressed--the log file is not compressed.

If both a WAIT_OPTION and a SNAPSHOT_OPTION are used, they may be
specified in either order. For example, all of the following commands
are valid, assuming that there is no existing backup having 4 as its ID:

     START BACKUP WAIT STARTED SNAPSHOTSTART
     START BACKUP SNAPSHOTSTART WAIT STARTED
     START BACKUP 4 WAIT COMPLETED SNAPSHOTSTART
     START BACKUP SNAPSHOTEND WAIT COMPLETED
     START BACKUP 4 NOWAIT SNAPSHOTSTART

The procedure for creating a backup consists of the following steps:

  1. Start the management client (*Note `ndb_mgm':
     mysql-cluster-programs-ndb-mgm.), if it not running already.

  2. Execute the START BACKUP command.  This produces several lines of
     output indicating the progress of the backup, as shown here:

          ndb_mgm> START BACKUP
          Waiting for completed, this may take several minutes
          Node 2: Backup 1 started from node 1
          Node 2: Backup 1 started from node 1 completed
           StartGCP: 177 StopGCP: 180
           #Records: 7362 #LogRecords: 0
           Data: 453648 bytes Log: 0 bytes
          ndb_mgm>

  3. When the backup has started the management client displays this
     message:

          Backup BACKUP_ID started from node NODE_ID

     BACKUP_ID is the unique identifier for this particular backup.
     This identifier is saved in the cluster log, if it has not been
     configured otherwise. NODE_ID is the identifier of the management
     server that is coordinating the backup with the data nodes. At
     this point in the backup process the cluster has received and
     processed the backup request. It does not mean that the backup has
     finished. An example of this statement is shown here:

          Node 2: Backup 1 started from node 1

  4. The management client indicates with a message like this one that
     the backup has started:

          Backup BACKUP_ID started from node NODE_ID completed

     As is the case for the notification that the backup has started,
     BACKUP_ID is the unique identifier for this particular backup, and
     NODE_ID is the node ID of the management server that is
     coordinating the backup with the data nodes. This output is
     accompanied by additional information including relevant global
     checkpoints, the number of records backed up, and the size of the
     data, as shown here:

          Node 2: Backup 1 started from node 1 completed
           StartGCP: 177 StopGCP: 180
           #Records: 7362 #LogRecords: 0
           Data: 453648 bytes Log: 0 bytes

It is also possible to perform a backup from the system shell by
invoking *Note `ndb_mgm': mysql-cluster-programs-ndb-mgm. with the `-e'
or `--execute' option, as shown in this example:

     shell> ndb_mgm -e "START BACKUP 6 WAIT COMPLETED SNAPSHOTSTART"

When using `START BACKUP' in this way, you must specify the backup ID.

Cluster backups are created by default in the `BACKUP' subdirectory of
the `DataDir' on each data node. This can be overridden for one or more
data nodes individually, or for all cluster data nodes in the
`config.ini' file using the `BackupDataDir' configuration parameter.
The backup files created for a backup with a given BACKUP_ID are stored
in a subdirectory named `BACKUP-BACKUP_ID' in the backup directory.

To abort a backup that is already in progress:

  1. Start the management client.

  2. Execute this command:

          ndb_mgm> ABORT BACKUP BACKUP_ID

     The number BACKUP_ID is the identifier of the backup that was
     included in the response of the management client when the backup
     was started (in the message `Backup BACKUP_ID started from node
     MANAGEMENT_NODE_ID').

  3. The management client will acknowledge the abort request with
     `Abort of backup BACKUP_ID ordered'.

     *Note*:

     At this point, the management client has not yet received a
     response from the cluster data nodes to this request, and the
     backup has not yet actually been aborted.

  4. After the backup has been aborted, the management client will
     report this fact in a manner similar to what is shown here:

          Node 1: Backup 3 started from 5 has been aborted.
            Error: 1321 - Backup aborted by user request: Permanent error: User defined error
          Node 3: Backup 3 started from 5 has been aborted.
            Error: 1323 - 1323: Permanent error: Internal error
          Node 2: Backup 3 started from 5 has been aborted.
            Error: 1323 - 1323: Permanent error: Internal error
          Node 4: Backup 3 started from 5 has been aborted.
            Error: 1323 - 1323: Permanent error: Internal error

     In this example, we have shown sample output for a cluster with 4
     data nodes, where the sequence number of the backup to be aborted
     is `3', and the management node to which the cluster management
     client is connected has the node ID `5'. The first node to complete
     its part in aborting the backup reports that the reason for the
     abort was due to a request by the user. (The remaining nodes
     report that the backup was aborted due to an unspecified internal
     error.)

     *Note*:

     There is no guarantee that the cluster nodes respond to an `ABORT
     BACKUP' command in any particular order.

     The `Backup BACKUP_ID started from node MANAGEMENT_NODE_ID has been
     aborted' messages mean that the backup has been terminated and
     that all files relating to this backup have been removed from the
     cluster file system.

It is also possible to abort a backup in progress from a system shell
using this command:

     shell> ndb_mgm -e "ABORT BACKUP BACKUP_ID"

*Note*:

If there is no backup having the ID BACKUP_ID running when an `ABORT
BACKUP' is issued, the management client makes no response, nor is it
indicated in the cluster log that an invalid abort command was sent.


File: manual.info,  Node: mysql-cluster-backup-configuration,  Next: mysql-cluster-backup-troubleshooting,  Prev: mysql-cluster-backup-using-management-client,  Up: mysql-cluster-backup

17.5.3.3 Configuration for MySQL Cluster Backups
................................................

Five configuration parameters are essential for backup:

   * `BackupDataBufferSize'

     The amount of memory used to buffer data before it is written to
     disk.

   * `BackupLogBufferSize'

     The amount of memory used to buffer log records before these are
     written to disk.

   * `BackupMemory'

     The total memory allocated in a data node for backups. This should
     be the sum of the memory allocated for the backup data buffer and
     the backup log buffer.

   * `BackupWriteSize'

     The default size of blocks written to disk. This applies for both
     the backup data buffer and the backup log buffer.

   * `BackupMaxWriteSize'

     The maximum size of blocks written to disk. This applies for both
     the backup data buffer and the backup log buffer.

More detailed information about these parameters can be found in Backup
Parameters.


File: manual.info,  Node: mysql-cluster-backup-troubleshooting,  Prev: mysql-cluster-backup-configuration,  Up: mysql-cluster-backup

17.5.3.4 MySQL Cluster Backup Troubleshooting
.............................................

If an error code is returned when issuing a backup request, the most
likely cause is insufficient memory or disk space. You should check
that there is enough memory allocated for the backup.

*Important*:

If you have set `BackupDataBufferSize' and `BackupLogBufferSize' and
their sum is greater than 4MB, then you must also set `BackupMemory' as
well.

You should also make sure that there is sufficient space on the hard
drive partition of the backup target.

*Note `NDB': mysql-cluster. does not support repeatable reads, which
can cause problems with the restoration process.  Although the backup
process is `hot', restoring a MySQL Cluster from backup is not a 100%
`hot' process. This is due to the fact that, for the duration of the
restore process, running transactions get nonrepeatable reads from the
restored data. This means that the state of the data is inconsistent
while the restore is in progress.


File: manual.info,  Node: mysql-cluster-mysqld,  Next: mysql-cluster-rolling-restart,  Prev: mysql-cluster-backup,  Up: mysql-cluster-management

17.5.4 MySQL Server Usage for MySQL Cluster
-------------------------------------------

*Note `mysqld': mysqld. is the traditional MySQL server process.  To be
used with MySQL Cluster, *Note `mysqld': mysqld. needs to be built with
support for the *Note `NDBCLUSTER': mysql-cluster. storage engine, as
it is in the precompiled binaries available from
`http://dev.mysql.com/downloads/'. If you build MySQL from source, you
must invoke `configure' with one of the options to enable *Note
`NDBCLUSTER': mysql-cluster.  storage engine support:

   * `--with-plugins=ndbcluster'
     (http://dev.mysql.com/doc/refman/5.1/en/source-configuration-options.html#option_configure_with-plugins)

   * `--with-plugins=max'
     (http://dev.mysql.com/doc/refman/5.1/en/source-configuration-options.html#option_configure_with-plugins)

   * `--with-plugins=max-no-innodb'
     (http://dev.mysql.com/doc/refman/5.1/en/source-configuration-options.html#option_configure_with-plugins)

(`--with-ndbcluster' also works to enable *Note `NDBCLUSTER':
mysql-cluster. support, but is deprecated and so produces a `configure'
warning as of MySQL 5.1.9.)

For information about other MySQL server options and variables relevant
to MySQL Cluster in addition to those discussed in this section, see
*Note mysql-cluster-options-variables::.

If the *Note `mysqld': mysqld. binary has been built with Cluster
support, the *Note `NDBCLUSTER': mysql-cluster.  storage engine is
still disabled by default. You can use either of two possible options
to enable this engine:

   * Use `--ndbcluster' as a startup option on the command line when
     starting *Note `mysqld': mysqld.

   * Insert a line containing `ndbcluster' in the `[mysqld]' section of
     your `my.cnf' file.

An easy way to verify that your server is running with the *Note
`NDBCLUSTER': mysql-cluster. storage engine enabled is to issue the
*Note `SHOW ENGINES': show-engines. statement in the MySQL Monitor
(*Note `mysql': mysql.). You should see the value `YES' as the `Support'
value in the row for *Note `NDBCLUSTER': mysql-cluster. If you see `NO'
in this row or if there is no such row displayed in the output, you are
not running an *Note `NDB': mysql-cluster.-enabled version of MySQL. If
you see `DISABLED' in this row, you need to enable it in either one of
the two ways just described.

To read cluster configuration data, the MySQL server requires at a
minimum three pieces of information:

   * The MySQL server's own cluster node ID

   * The host name or IP address for the management server (MGM node)

   * The number of the TCP/IP port on which it can connect to the
     management server

Node IDs can be allocated dynamically, so it is not strictly necessary
to specify them explicitly.

The *Note `mysqld': mysqld. parameter `ndb-connectstring' is used to
specify the connection string either on the command line when starting
*Note `mysqld': mysqld. or in `my.cnf'. The connection string contains
the host name or IP address where the management server can be found,
as well as the TCP/IP port it uses.

In the following example, `ndb_mgmd.mysql.com' is the host where the
management server resides, and the management server listens for
cluster messages on port 1186:

     shell> mysqld --ndbcluster --ndb-connectstring=ndb_mgmd.mysql.com:1186

See *Note mysql-cluster-connection-strings::, for more information on
connection strings.

Given this information, the MySQL server will be a full participant in
the cluster. (We often refer to a *Note `mysqld': mysqld. process
running in this manner as an SQL node.) It will be fully aware of all
cluster data nodes as well as their status, and will establish
connections to all data nodes. In this case, it is able to use any data
node as a transaction coordinator and to read and update node data.

You can see in the *Note `mysql': mysql. client whether a MySQL server
is connected to the cluster using *Note `SHOW PROCESSLIST':
show-processlist. If the MySQL server is connected to the cluster, and
you have the `PROCESS' privilege, then the first row of the output is
as shown here:

     mysql> SHOW PROCESSLIST \G
     *************************** 1. row ***************************
          Id: 1
        User: system user
        Host:
          db:
     Command: Daemon
        Time: 1
       State: Waiting for event from ndbcluster
        Info: NULL

*Important*:

To participate in a MySQL Cluster, the *Note `mysqld': mysqld.  process
must be started with _both_ the options `--ndbcluster' and
`--ndb-connectstring' (or their equivalents in `my.cnf'). If *Note
`mysqld': mysqld. is started with only the `--ndbcluster' option, or if
it is unable to contact the cluster, it is not possible to work with
*Note `NDB': mysql-cluster. tables, _nor is it possible to create any
new tables regardless of storage engine_. The latter restriction is a
safety measure intended to prevent the creation of tables having the
same names as *Note `NDB': mysql-cluster. tables while the SQL node is
not connected to the cluster. If you wish to create tables using a
different storage engine while the *Note `mysqld': mysqld.  process is
not participating in a MySQL Cluster, you must restart the server
_without_ the `--ndbcluster' option.


File: manual.info,  Node: mysql-cluster-rolling-restart,  Next: mysql-cluster-event-reports,  Prev: mysql-cluster-mysqld,  Up: mysql-cluster-management

17.5.5 Performing a Rolling Restart of a MySQL Cluster
------------------------------------------------------

This section discusses how to perform a _rolling restart_ of a MySQL
Cluster installation, so called because it involves stopping and
starting (or restarting) each node in turn, so that the cluster itself
remains operational. This is often done as part of a _rolling upgrade_
or _rolling downgrade_, where high availability of the cluster is
mandatory and no downtime of the cluster as a whole is permissible.
Where we refer to upgrades, the information provided here also
generally applies to downgrades as well.

There are a number of reasons why a rolling restart might be desirable.
These are described in the next few paragraphs.

Configuration change

To make a change in the cluster's configuration, such as adding an SQL
node to the cluster, or setting a configuration parameter to a new
value.

MySQL Cluster software upgrade or downgrade

To upgrade the cluster to a newer version of the MySQL Cluster software
(or to downgrade it to an older version). This is usually referred to
as a `rolling upgrade' (or `rolling downgrade', when reverting to an
older version of MySQL Cluster).

Change on node host

To make changes in the hardware or operating system on which one or
more MySQL Cluster node processes are running.

System reset (cluster reset)

To reset the cluster because it has reached an undesirable state. In
such cases it is often desirable to reload the data and metadata of one
or more data nodes. This can be done in any of three ways:

   * Start each data node process (*Note `ndbd':
     mysql-cluster-programs-ndbd. or possibly *Note `ndbmtd':
     mysql-cluster-programs-ndbmtd.) with the `--initial' option, which
     forces the data node to clear its file system and to reload all
     MySQL Cluster data and metadata from the other data nodes.

   * Create a backup using the *Note `ndb_mgm':
     mysql-cluster-programs-ndb-mgm. client `BACKUP' command prior to
     performing the restart. Following the upgrade, restore the node or
     nodes using *Note `ndb_restore':
     mysql-cluster-programs-ndb-restore.

     See *Note mysql-cluster-backup::, and *Note
     mysql-cluster-programs-ndb-restore::, for more information.

   * Use *Note `mysqldump': mysqldump. to create a backup prior to the
     upgrade; afterward, restore the dump using *Note `LOAD DATA
     INFILE': load-data.

Resource Recovery

To free memory previously allocated to a table by successive *Note
`INSERT': insert. and *Note `DELETE': delete. operations, for re-use by
other MySQL Cluster tables.

The process for performing a rolling restart may be generalized as
follows:

  1. Stop all cluster management nodes (*Note `ndb_mgmd':
     mysql-cluster-programs-ndb-mgmd.  processes), reconfigure them,
     then restart them. (See *Note
     mysql-cluster-rolling-restart-multiple-ndb-mgmd::.)

  2. Stop, reconfigure, then restart each cluster data node (*Note
     `ndbd': mysql-cluster-programs-ndbd. process) in turn.

  3. Stop, reconfigure, then restart each cluster SQL node (*Note
     `mysqld': mysqld. process) in turn.

The specifics for implementing a given rolling upgrade depend upon the
changes being made. A more detailed view of the process is presented
here:

MySQL Cluster Rolling Restarts (By Type)

In the previous diagram, the *Stop* and *Start* steps indicate that the
process must be stopped completely using a shell command (such as *Note
`kill': kill. on most Unix systems) or the management client `STOP'
command, then started again from a system shell by invoking the *Note
`ndbd': mysql-cluster-programs-ndbd. or *Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd. executable as appropriate. On Windows,
you can also use the system `NET START' and `NET STOP' commands or the
Windows Service Manager to start and stop nodes which have been
installed as Windows services (see *Note
mysql-cluster-install-windows-service::).

*Restart* indicates that the process may be restarted using the *Note
`ndb_mgm': mysql-cluster-programs-ndb-mgm.  management client `RESTART'
command (see *Note mysql-cluster-mgm-client-commands::).

MySQL Cluster supports a flexible order for upgrading nodes. When
upgrading a MySQL Cluster, you may upgrade API nodes (including SQL
nodes) before upgrading the management nodes, data nodes, or both. In
other words, you are permitted to upgrade the API and SQL nodes in any
order. This is subject to the following provisions:

   * This functionality is intended for use as part of an online
     upgrade only. A mix of node binaries from different MySQL Cluster
     releases is neither intended nor supported for continuous,
     long-term use in a production setting.

   * All management nodes must be upgraded before any data nodes are
     upgraded. This remains true regardless of the order in which you
     upgrade the cluster's API and SQL nodes.

   * Features specific to the `new' version must not be used until all
     management nodes and data nodes have been upgraded.

     This also applies to any MySQL Server version change that may
     apply, in addition to the NDB engine version change, so do not
     forget to take this into account when planning the upgrade.  (This
     is true for online upgrades of MySQL Cluster in general.)

See also Bug #48528 and Bug #49163.

Rolling restarts with multiple management servers

When performing a rolling restart of a MySQL Cluster with multiple
management nodes, you should keep in mind that *Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd. checks to see if any other management
node is running, and, if so, tries to use that node's configuration
data. To keep this from occurring, and to force *Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd. to reread its configuration file,
perform the following steps:

  1. Stop all MySQL Cluster *Note `ndb_mgmd':
     mysql-cluster-programs-ndb-mgmd. processes.

  2. Update all `config.ini' files.

  3. Start a single *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd.
     with `--reload', `--initial', or both options as desired.

  4. If you started the first *Note `ndb_mgmd':
     mysql-cluster-programs-ndb-mgmd. with the `--initial' option, you
     must also start any remaining *Note `ndb_mgmd':
     mysql-cluster-programs-ndb-mgmd. processes using `--initial'.

     Regardless of any other options used when starting the first *Note
     `ndb_mgmd': mysql-cluster-programs-ndb-mgmd, you should not start
     any remaining *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd.
     processes after the first one using `--reload'.

  5. Complete the rolling restarts of the data nodes and API nodes as
     normal.

When performing a rolling restart to update the cluster's
configuration, you can use the `config_generation' column of the *Note
`ndbinfo.nodes': mysql-cluster-ndbinfo-nodes. table to keep track of
which data nodes have been successfully restarted with the new
configuration. See *Note mysql-cluster-ndbinfo-nodes::.


File: manual.info,  Node: mysql-cluster-event-reports,  Next: mysql-cluster-logs-ndb-messages,  Prev: mysql-cluster-rolling-restart,  Up: mysql-cluster-management

17.5.6 Event Reports Generated in MySQL Cluster
-----------------------------------------------

* Menu:

* mysql-cluster-logging-management-commands::  MySQL Cluster Logging Management Commands
* mysql-cluster-log-events::     MySQL Cluster Log Events
* mysql-cluster-log-statistics::  Using `CLUSTERLOG STATISTICS' in the MySQL Cluster Management Client

In this section, we discuss the types of event logs provided by MySQL
Cluster, and the types of events that are logged.

MySQL Cluster provides two types of event log:

   * The _cluster log_, which includes events generated by all cluster
     nodes. The cluster log is the log recommended for most uses
     because it provides logging information for an entire cluster in a
     single location.

     By default, the cluster log is saved to a file named
     `ndb_NODE_ID_cluster.log', (where NODE_ID is the node ID of the
     management server) in the same directory where the *Note
     `ndb_mgm': mysql-cluster-programs-ndb-mgm. binary resides.

     Cluster logging information can also be sent to `stdout' or a
     `syslog' facility in addition to or instead of being saved to a
     file, as determined by the values set for the `DataDir' and
     `LogDestination' configuration parameters. See *Note
     mysql-cluster-mgm-definition::, for more information about these
     parameters.

   * _Node logs_ are local to each node.

     Output generated by node event logging is written to the file
     `ndb_NODE_ID_out.log' (where NODE_ID is the node's node ID) in the
     node's `DataDir'. Node event logs are generated for both
     management nodes and data nodes.

     Node logs are intended to be used only during application
     development, or for debugging application code.

Both types of event logs can be set to log different subsets of events.

Each reportable event can be distinguished according to three different
criteria:

   * _Category_: This can be any one of the following values: `STARTUP',
     `SHUTDOWN', `STATISTICS', `CHECKPOINT', `NODERESTART',
     `CONNECTION', `ERROR', or `INFO'.

   * _Priority_: This is represented by one of the numbers from 1 to 15
     inclusive, where 1 indicates `most important' and 15 `least
     important.'

   * _Severity Level_: This can be any one of the following values:
     `ALERT', `CRITICAL', `ERROR', `WARNING', `INFO', or `DEBUG'.

Both the cluster log and the node log can be filtered on these
properties.

The format used in the cluster log is as shown here:

     2007-01-26 19:35:55 [MgmSrvr] INFO     -- Node 1: Data usage is 2%(60 32K pages of total 2560)
     2007-01-26 19:35:55 [MgmSrvr] INFO     -- Node 1: Index usage is 1%(24 8K pages of total 2336)
     2007-01-26 19:35:55 [MgmSrvr] INFO     -- Node 1: Resource 0 min: 0 max: 639 curr: 0
     2007-01-26 19:35:55 [MgmSrvr] INFO     -- Node 2: Data usage is 2%(76 32K pages of total 2560)
     2007-01-26 19:35:55 [MgmSrvr] INFO     -- Node 2: Index usage is 1%(24 8K pages of total 2336)
     2007-01-26 19:35:55 [MgmSrvr] INFO     -- Node 2: Resource 0 min: 0 max: 639 curr: 0
     2007-01-26 19:35:55 [MgmSrvr] INFO     -- Node 3: Data usage is 2%(58 32K pages of total 2560)
     2007-01-26 19:35:55 [MgmSrvr] INFO     -- Node 3: Index usage is 1%(25 8K pages of total 2336)
     2007-01-26 19:35:55 [MgmSrvr] INFO     -- Node 3: Resource 0 min: 0 max: 639 curr: 0
     2007-01-26 19:35:55 [MgmSrvr] INFO     -- Node 4: Data usage is 2%(74 32K pages of total 2560)
     2007-01-26 19:35:55 [MgmSrvr] INFO     -- Node 4: Index usage is 1%(25 8K pages of total 2336)
     2007-01-26 19:35:55 [MgmSrvr] INFO     -- Node 4: Resource 0 min: 0 max: 639 curr: 0
     2007-01-26 19:39:42 [MgmSrvr] INFO     -- Node 4: Node 9 Connected
     2007-01-26 19:39:42 [MgmSrvr] INFO     -- Node 1: Node 9 Connected
     2007-01-26 19:39:42 [MgmSrvr] INFO     -- Node 1: Node 9: API 5.5.33-ndb-7.2.14
     2007-01-26 19:39:42 [MgmSrvr] INFO     -- Node 2: Node 9 Connected
     2007-01-26 19:39:42 [MgmSrvr] INFO     -- Node 2: Node 9: API 5.5.33-ndb-7.2.14
     2007-01-26 19:39:42 [MgmSrvr] INFO     -- Node 3: Node 9 Connected
     2007-01-26 19:39:42 [MgmSrvr] INFO     -- Node 3: Node 9: API 5.5.33-ndb-7.2.14
     2007-01-26 19:39:42 [MgmSrvr] INFO     -- Node 4: Node 9: API 5.5.33-ndb-7.2.14
     2007-01-26 19:59:22 [MgmSrvr] ALERT    -- Node 2: Node 7 Disconnected
     2007-01-26 19:59:22 [MgmSrvr] ALERT    -- Node 2: Node 7 Disconnected

Each line in the cluster log contains the following information:

   * A timestamp in `YYYY-MM-DD HH:MM:SS' format.

   * The type of node which is performing the logging. In the cluster
     log, this is always `[MgmSrvr]'.

   * The severity of the event.

   * The ID of the node reporting the event.

   * A description of the event. The most common types of events to
     appear in the log are connections and disconnections between
     different nodes in the cluster, and when checkpoints occur. In
     some cases, the description may contain status information.


File: manual.info,  Node: mysql-cluster-logging-management-commands,  Next: mysql-cluster-log-events,  Prev: mysql-cluster-event-reports,  Up: mysql-cluster-event-reports

17.5.6.1 MySQL Cluster Logging Management Commands
..................................................

*Note `ndb_mgm': mysql-cluster-programs-ndb-mgm. supports a number of
management commands related to the cluster log. In the listing that
follows, NODE_ID denotes either a database node ID or the keyword
`ALL', which indicates that the command should be applied to all of the
cluster's data nodes.

   * `CLUSTERLOG ON'

     Turns the cluster log on.

   * `CLUSTERLOG OFF'

     Turns the cluster log off.

   * `CLUSTERLOG INFO'

     Provides information about cluster log settings.

   * `NODE_ID CLUSTERLOG CATEGORY=THRESHOLD'

     Logs CATEGORY events with priority less than or equal to THRESHOLD
     in the cluster log.

   * `CLUSTERLOG FILTER SEVERITY_LEVEL'

     Toggles cluster logging of events of the specified SEVERITY_LEVEL.

The following table describes the default setting (for all data nodes)
of the cluster log category threshold. If an event has a priority with
a value lower than or equal to the priority threshold, it is reported
in the cluster log.

Note that events are reported per data node, and that the threshold can
be set to different values on different nodes.

This table lists cluster log categories and provides the default
threshold setting (for all data nodes).

Category               Default threshold (All data nodes)
`STARTUP'              *7*
`SHUTDOWN'             *7*
`STATISTICS'           *7*
`CHECKPOINT'           *7*
`NODERESTART'          *7*
`CONNECTION'           *7*
`ERROR'                *15*
`INFO'                 *7*

The `STATISTICS' category can provide a great deal of useful data. See
*Note mysql-cluster-log-statistics::, for more information.

Thresholds are used to filter events within each category. For example,
a `STARTUP' event with a priority of 3 is not logged unless the
threshold for `STARTUP' is set to 3 or higher. Only events with
priority 3 or lower are sent if the threshold is 3.

The following table shows the event severity levels.

*Note*:

These correspond to Unix `syslog' levels, except for `LOG_EMERG' and
`LOG_NOTICE', which are not used or mapped.

This table lists event severity level values along with the event
severity and a description.

Severity       Severity       Description
Level Value                   
*1*            `ALERT'        A condition that should be corrected
                              immediately, such as a corrupted system
                              database
*2*            `CRITICAL'     Critical conditions, such as device errors
                              or insufficient resources
*3*            `ERROR'        Conditions that should be corrected, such
                              as configuration errors
*4*            `WARNING'      Conditions that are not errors, but that
                              might require special handling
*5*            `INFO'         Informational messages
*6*            `DEBUG'        Debugging messages used for *Note
                              `NDBCLUSTER': mysql-cluster.  development

Event severity levels can be turned on or off (using `CLUSTERLOG
FILTER'--see above). If a severity level is turned on, then all events
with a priority less than or equal to the category thresholds are
logged. If the severity level is turned off then no events belonging to
that severity level are logged.

*Important*:

Cluster log levels are set on a per *Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd, per subscriber basis. This means that,
in a MySQL Cluster with multiple management servers, using a
`CLUSTERLOG' command in an instance of *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm. connected to one management server
affects only logs generated by that management server but not by any of
the others. This also means that, should one of the management servers
be restarted, only logs generated by that management server are
affected by the resetting of log levels caused by the restart.


File: manual.info,  Node: mysql-cluster-log-events,  Next: mysql-cluster-log-statistics,  Prev: mysql-cluster-logging-management-commands,  Up: mysql-cluster-event-reports

17.5.6.2 MySQL Cluster Log Events
.................................

An event report reported in the event logs has the following format:

     DATETIME [STRING] SEVERITY -- MESSAGE

For example:

     09:19:30 2005-07-24 [NDB] INFO -- Node 4 Start phase 4 completed

This section discusses all reportable events, ordered by category and
severity level within each category.

In the event descriptions, GCP and LCP mean `Global Checkpoint' and
`Local Checkpoint', respectively.

*`CONNECTION' Events*

These events are associated with connections between Cluster nodes.

This table lists events that are associated with connections between
cluster nodes. In order, the table shows the event, priority, severity
level, and provides a description.

Event                     PrioritySeverityDescription
                                  Level   
data nodes connected      8       `INFO'  Data nodes connected
data nodes disconnected   8       `INFO'  Data nodes disconnected
Communication closed      8       `INFO'  SQL node or data node
                                          connection closed
Communication opened      8       `INFO'  SQL node or data node
                                          connection opened

*`CHECKPOINT' Events*

The logging messages shown here are associated with checkpoints.

This table lists events that are associated with checkpoints. In order,
the table shows the event, priority, severity level, and provides a
description.

Event                     PrioritySeverityDescription
                                  Level   
LCP stopped in calc keep  0       `ALERT' LCP stopped
GCI                                       
Local checkpoint          11      `INFO'  LCP on a fragment has been
fragment completed                        completed
Global checkpoint         10      `INFO'  GCP finished
completed                                 
Global checkpoint started 9       `INFO'  Start of GCP: REDO log is
                                          written to disk
Local checkpoint          8       `INFO'  LCP completed normally
completed                                 
Local checkpoint started  7       `INFO'  Start of LCP: data written to
                                          disk

*`STARTUP' Events*

The following events are generated in response to the startup of a node
or of the cluster and of its success or failure. They also provide
information relating to the progress of the startup process, including
information concerning logging activities.

This table lists events that are generated in response to the startup
of a node or cluster and events that provide information about startup
progress, including information about logging activities. In order, the
table shows the event, priority, severity level, and provides a
description.

Event                     PrioritySeverityDescription
                                  Level   
Internal start signal     15      `INFO'  Blocks received after
received STTORRY                          completion of restart
New REDO log started      10      `INFO'  GCI keep X, newest restorable
                                          GCI Y
New log started           10      `INFO'  Log part X, start MB Y, stop MB
                                          Z
Node has been refused     8       `INFO'  Node cannot be included in
for inclusion in the                      cluster due to
cluster                                   misconfiguration, inability to
                                          establish communication, or
                                          other problem
data node neighbors       8       `INFO'  Shows neighboring data nodes
data node start phase X   4       `INFO'  A data node start phase has
completed                                 been completed
Node has been             3       `INFO'  Displays the node, managing
successfully included                     node, and dynamic ID
into the cluster                          
data node start phases    1       `INFO'  NDB Cluster nodes starting
initiated                                 
data node all start       1       `INFO'  NDB Cluster nodes started
phases completed                          
data node shutdown        1       `INFO'  Shutdown of data node has
initiated                                 commenced
data node shutdown        1       `INFO'  Unable to shut down data node
aborted                                   normally

*`NODERESTART' Events*

The following events are generated when restarting a node and relate to
the success or failure of the node restart process.

This table lists events that are generated when restarting a node and
that relate to the success or failure of the node restart process. In
order, the table shows the event, priority, severity level, and
provides a description.

Event                     PrioritySeverityDescription
                                  Level   
Node failure phase        8       `ALERT' Reports completion of node
completed                                 failure phases
Node has failed, node     8       `ALERT' Reports that a node has failed
state was X                               
Report arbitrator results 2       `ALERT' There are eight different
                                          possible results for
                                          arbitration attempts:
                                          
                                             * Arbitration check
                                               failed--less than 1/2 nodes
                                               left
                                          
                                             * Arbitration check
                                               succeeded--node group
                                               majority
                                          
                                             * Arbitration check
                                               failed--missing node group
                                          
                                             * Network
                                               partitioning--arbitration
                                               required
                                          
                                             * Arbitration
                                               succeeded--affirmative
                                               response from node X
                                          
                                             * Arbitration failed -
                                               negative response from node
                                               X
                                          
                                             * Network partitioning - no
                                               arbitrator available
                                          
                                             * Network partitioning - no
                                               arbitrator configured
Completed copying a       10      `INFO'  
fragment                                  
Completed copying of      8       `INFO'  
dictionary information                    
Completed copying         8       `INFO'  
distribution information                  
Starting to copy          8       `INFO'  
fragments                                 
Completed copying all     8       `INFO'  
fragments                                 
GCP takeover started      7       `INFO'  
GCP takeover completed    7       `INFO'  
LCP takeover started      7       `INFO'  
LCP takeover completed    7       `INFO'  
(state = X)                               
Report whether an         6       `INFO'  There are seven different
arbitrator is found or                    possible outcomes when seeking
not                                       an arbitrator:
                                          
                                             * Management server restarts
                                               arbitration thread
                                               [state=X]
                                          
                                             * Prepare arbitrator node X
                                               [ticket=Y]
                                          
                                             * Receive arbitrator node X
                                               [ticket=Y]
                                          
                                             * Started arbitrator node X
                                               [ticket=Y]
                                          
                                             * Lost arbitrator node X -
                                               process failure [state=Y]
                                          
                                             * Lost arbitrator node X -
                                               process exit [state=Y]
                                          
                                             * Lost arbitrator node X
                                               <error msg> [state=Y]
*`STATISTICS' Events*

The following events are of a statistical nature. They provide
information such as numbers of transactions and other operations,
amount of data sent or received by individual nodes, and memory usage.

This table lists events that are of a statistical nature. In order, the
table shows the event, priority, severity level, and provides a
description.

Event                     PrioritySeverityDescription
                                  Level   
Report job scheduling     9       `INFO'  Mean internal job scheduling
statistics                                statistics
Sent number of bytes      9       `INFO'  Mean number of bytes sent to
                                          node X
Received # of bytes       9       `INFO'  Mean number of bytes received
                                          from node X
Report transaction        8       `INFO'  Numbers of: transactions,
statistics                                commits, reads, simple reads,
                                          writes, concurrent operations,
                                          attribute information, and
                                          aborts
Report operations         8       `INFO'  Number of operations
Report table create       7       `INFO'  
Memory usage              5       `INFO'  Data and index memory usage
                                          (80%, 90%, and 100%)

*`ERROR' Events*

These events relate to Cluster errors and warnings. The presence of one
or more of these generally indicates that a major malfunction or
failure has occurred.

This table lists events that relate to cluster errors and warnings. In
order, the table shows the event, priority, severity, and provides a
description.

Event                     PrioritySeverityDescription
Dead due to missed        8       `ALERT' Node X declared `dead' due to
heartbeat                                 missed heartbeat
Transporter errors        2       ERROR   
Transporter warnings      8       `WARNING'
Missed heartbeats         8       `WARNING'Node X missed heartbeat #Y
General warning events    2       `WARNING'

*`INFO' Events*

These events provide general information about the state of the cluster
and activities associated with Cluster maintenance, such as logging and
heartbeat transmission.

This table lists events that provide general information about the
state of the cluster and about activities associated with cluster
maintenance, such as logging and heartbeat transmission. In order, the
table shows the event, priority, severity, and provides a description.

Event                     PrioritySeverityDescription
Sent heartbeat            12      `INFO'  Heartbeat sent to node X
Create log bytes          11      `INFO'  Log part, log file, MB
General information       2       `INFO'  
events                                    


File: manual.info,  Node: mysql-cluster-log-statistics,  Prev: mysql-cluster-log-events,  Up: mysql-cluster-event-reports

17.5.6.3 Using `CLUSTERLOG STATISTICS' in the MySQL Cluster Management Client
.............................................................................

The *Note `NDB': mysql-cluster. management client's `CLUSTERLOG
STATISTICS' command can provide a number of useful statistics in its
output. Counters providing information about the state of the cluster
are updated at 5-second reporting intervals by the transaction
coordinator (TC) and the local query handler (LQH), and written to the
cluster log.

Transaction coordinator statistics

Each transaction has one transaction coordinator, which is chosen by
one of the following methods:

   * In a round-robin fashion

   * By communication proximity

   * (_Beginning with MySQL Cluster NDB 6.3.4_:) By supplying a data
     placement hint when the transaction is started

*Note*:

You can determine which TC selection method is used for transactions
started from a given SQL node using the `ndb_optimized_node_selection'
system variable.

All operations within the same transaction use the same transaction
coordinator, which reports the following statistics:

   * `Trans count'

     This is the number transactions started in the last interval using
     this TC as the transaction coordinator. Any of these transactions
     may have committed, have been aborted, or remain uncommitted at
     the end of the reporting interval.

     *Note*:

     Transactions do not migrate between TCs.

   * `Commit count'

     This is the number of transactions using this TC as the
     transaction coordinator that were committed in the last reporting
     interval. Because some transactions committed in this reporting
     interval may have started in a previous reporting interval, it is
     possible for `Commit count' to be greater than `Trans count'.

   * `Read count'

     This is the number of primary key read operations using this TC as
     the transaction coordinator that were started in the last
     reporting interval, including simple reads.  This count also
     includes reads performed as part of unique index operations. A
     unique index read operation generates 2 primary key read
     operations--1 for the hidden unique index table, and 1 for the
     table on which the read takes place.

   * `Simple read count'

     This is the number of simple read operations using this TC as the
     transaction coordinator that were started in the last reporting
     interval. This is a subset of `Read count'. Because the value of
     `Simple read count' is incremented at a different point in time
     from `Read count', it can lag behind `Read count' slightly, so it
     is conceivable that `Simple read count' is not equal to `Read
     count' for a given reporting interval, even if all reads made
     during that time were in fact simple reads.

   * `Write count'

     This is the number of primary key write operations using this TC
     as the transaction coordinator that were started in the last
     reporting interval. This includes all inserts, updates, writes and
     deletes, as well as writes performed as part of unique index
     operations.

     *Note*:

     A unique index update operation can generate multiple PK read and
     write operations on the index table and on the base table.

   * `AttrInfoCount'

     This is the number of 32-bit data words received in the last
     reporting interval for primary key operations using this TC as the
     transaction coordinator. For reads, this is proportional to the
     number of columns requested. For inserts and updates, this is
     proportional to the number of columns written, and the size of
     their data. For delete operations, this is usually zero.

     Unique index operations generate multiple PK operations and so
     increase this count. However, data words sent to describe the PK
     operation itself, and the key information sent, are _not_ counted
     here. Attribute information sent to describe columns to read for
     scans, or to describe ScanFilters, is also not counted in
     `AttrInfoCount'.

   * `Concurrent Operations'

     This is the number of primary key or scan operations using this TC
     as the transaction coordinator that were started during the last
     reporting interval but that were not completed. Operations
     increment this counter when they are started and decrement it when
     they are completed; this occurs after the transaction commits.
     Dirty reads and writes--as well as failed operations--decrement
     this counter.

     The maximum value that `Concurrent Operations' can have is the
     maximum number of operations that a TC block can support;
     currently, this is `(2 * MaxNoOfConcurrentOperations) + 16 +
     MaxNoOfConcurrentTransactions'. (For more information about these
     configuration parameters, see the `Transaction Parameters' section
     of *Note mysql-cluster-ndbd-definition::.)

   * `Abort count'

     This is the number of transactions using this TC as the
     transaction coordinator that were aborted during the last
     reporting interval. Because some transactions that were aborted in
     the last reporting interval may have started in a previous
     reporting interval, `Abort count' can sometimes be greater than
     `Trans count'.

   * `Scans'

     This is the number of table scans using this TC as the transaction
     coordinator that were started during the last reporting interval.
     This does not include range scans (that is, ordered index scans).

   * `Range scans'

     This is the number of ordered index scans using this TC as the
     transaction coordinator that were started in the last reporting
     interval.

Local query handler statistics (`Operations')

There is 1 cluster event per local query handler block (that is, 1 per
data node process). Operations are recorded in the LQH where the data
they are operating on resides.

*Note*:

A single transaction may operate on data stored in multiple LQH blocks.

The `Operations' statistic provides the number of local operations
performed by this LQH block in the last reporting interval, and
includes all types of read and write operations (insert, update, write,
and delete operations). This also includes operations used to replicate
writes. For example, in a 2-replica cluster, the write to the primary
replica is recorded in the primary LQH, and the write to the backup
will be recorded in the backup LQH. Unique key operations may result in
multiple local operations; however, this does _not_ include local
operations generated as a result of a table scan or ordered index scan,
which are not counted.

Process scheduler statistics

In addition to the statistics reported by the transaction coordinator
and local query handler, each *Note `ndbd':
mysql-cluster-programs-ndbd. process has a scheduler which also
provides useful metrics relating to the performance of a MySQL Cluster.
This scheduler runs in an infinite loop; during each loop the scheduler
performs the following tasks:

  1. Read any incoming messages from sockets into a job buffer.

  2. Check whether there are any timed messages to be executed; if so,
     put these into the job buffer as well.

  3. Execute (in a loop) any messages in the job buffer.

  4. Send any distributed messages that were generated by executing the
     messages in the job buffer.

  5. Wait for any new incoming messages.

Process scheduler statistics include the following:

   * `Mean Loop Counter'

     This is the number of loops executed in the third step from the
     preceding list. This statistic increases in size as the
     utilization of the TCP/IP buffer improves. You can use this to
     monitor changes in performance as you add new data node processes.

   * `Mean send size' and `Mean receive size'

     These statistics enable you to gauge the efficiency of,
     respectively writes and reads between nodes. The values are given
     in bytes. Higher values mean a lower cost per byte sent or
     received; the maximum value is 64K.

To cause all cluster log statistics to be logged, you can use the
following command in the *Note `NDB': mysql-cluster.  management client:

     ndb_mgm> ALL CLUSTERLOG STATISTICS=15

*Note*:

Setting the threshold for `STATISTICS' to 15 causes the cluster log to
become very verbose, and to grow quite rapidly in size, in direct
proportion to the number of cluster nodes and the amount of activity in
the MySQL Cluster.

For more information about MySQL Cluster management client commands
relating to logging and reporting, see *Note
mysql-cluster-logging-management-commands::.


File: manual.info,  Node: mysql-cluster-logs-ndb-messages,  Next: mysql-cluster-single-user-mode,  Prev: mysql-cluster-event-reports,  Up: mysql-cluster-management

17.5.7 MySQL Cluster Log Messages
---------------------------------

* Menu:

* mysql-cluster-logs-cluster-log::  MySQL Cluster: Messages in the Cluster Log
* mysql-cluster-ndb-transporter-errors::  MySQL Cluster: `NDB' Transporter Errors

This section contains information about the messages written to the
cluster log in response to different cluster log events. It provides
additional, more specific information on *Note `NDB': mysql-cluster.
transporter errors.


File: manual.info,  Node: mysql-cluster-logs-cluster-log,  Next: mysql-cluster-ndb-transporter-errors,  Prev: mysql-cluster-logs-ndb-messages,  Up: mysql-cluster-logs-ndb-messages

17.5.7.1 MySQL Cluster: Messages in the Cluster Log
...................................................

The following table lists the most common *Note `NDB': mysql-cluster.
cluster log messages. For information about the cluster log, log
events, and event types, see *Note mysql-cluster-event-reports::. These
log messages also correspond to log event types in the MGM API; see The
`Ndb_logevent_type' Type
(http://dev.mysql.com/doc/ndbapi/en/mgm-ndb-logevent-type.html), for
related information of interest to Cluster API developers.

This table lists the most common *Note `NDB': mysql-cluster. cluster
log messages. The first column provides the log message and a
description of the log message. The second column lists the
corresponding event name, event type, priority, and severity.

Log Message                                 Event Name
                                            
`Node MGM_NODE_ID: Node DATA_NODE_ID        `Connected'
Connected'                                  
                                            Event Type
Description                                 
                                            `Connection'
The data node having node ID NODE_ID has    
connected to the management server (node    Priority
MGM_NODE_ID).                               
                                            8
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node MGM_NODE_ID: Node DATA_NODE_ID        `Disconnected'
Disconnected'                               
                                            Event Type
Description                                 
                                            `Connection'
The data node having node ID DATA_NODE_ID   
has disconnected from the management        Priority
server (node MGM_NODE_ID).                  
                                            8
                                            
                                            Severity
                                            
                                            `ALERT'
Log Message                                 Event Name
                                            
`Node DATA_NODE_ID: Communication to Node   `CommunicationClosed'
API_NODE_ID closed'                         
                                            Event Type
Description                                 
                                            `Connection'
The API node or SQL node having node ID     
API_NODE_ID is no longer communicating      Priority
with data node DATA_NODE_ID.                
                                            8
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node DATA_NODE_ID: Communication to Node   `CommunicationOpened'
API_NODE_ID opened'                         
                                            Event Type
Description                                 
                                            `Connection'
The API node or SQL node having node ID     
API_NODE_ID is now communicating with data  Priority
node DATA_NODE_ID.                          
                                            8
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node MGM_NODE_ID: Node API_NODE_ID: API    `ConnectedApiVersion'
VERSION'                                    
                                            Event Type
Description                                 
                                            `Connection'
The API node having node ID API_NODE_ID     
has connected to management node            Priority
MGM_NODE_ID using *Note `NDB':              
mysql-cluster. API version VERSION          8
(generally the same as the MySQL version    
number).                                    Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Global checkpoint GCI        `GlobalCheckpointStarted'
started'                                    
                                            Event Type
Description                                 
                                            `Checkpoint'
A global checkpoint with the ID GCI has     
been started; node NODE_ID is the master    Priority
responsible for this global checkpoint.     
                                            9
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Global checkpoint GCI        `GlobalCheckpointCompleted'
completed'                                  
                                            Event Type
Description                                 
                                            `Checkpoint'
The global checkpoint having the ID GCI     
has been completed; node NODE_ID was the    Priority
master responsible for this global          
checkpoint.                                 10
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Local checkpoint LCP         `LocalCheckpointStarted'
started. Keep GCI = CURRENT_GCI oldest      
restorable GCI = OLD_GCI'                   Event Type
                                            
Description                                 `Checkpoint'
                                            
The local checkpoint having sequence ID     Priority
LCP has been started on node NODE_ID. The   
most recent GCI that can be used has the    7
index CURRENT_GCI, and the oldest GCI from  
which the cluster can be restored has the   Severity
index OLD_GCI.                              
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Local checkpoint LCP         `LocalCheckpointCompleted'
completed'                                  
                                            Event Type
Description                                 
                                            `Checkpoint'
The local checkpoint having sequence ID     
LCP on node NODE_ID has been completed.     Priority
                                            
                                            8
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Local Checkpoint stopped in  `LCPStoppedInCalcKeepGci'
CALCULATED_KEEP_GCI'                        
                                            Event Type
Description                                 
                                            `Checkpoint'
The node was unable to determine the most   
recent usable GCI.                          Priority
                                            
                                            0
                                            
                                            Severity
                                            
                                            `ALERT'
Log Message                                 Event Name
                                            
`Node NODE_ID: Table ID = TABLE_ID,         `LCPFragmentCompleted'
fragment ID = FRAGMENT_ID has completed     
LCP on Node NODE_ID maxGciStarted:          Event Type
STARTED_GCI maxGciCompleted: COMPLETED_GCI' 
                                            `Checkpoint'
Description                                 
                                            Priority
A table fragment has been checkpointed to   
disk on node NODE_ID. The GCI in progress   11
has the index STARTED_GCI, and the most     
recent GCI to have been completed has the   Severity
index COMPLETED_GCI.                        
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: ACC Blocked NUM_1 and TUP    `UndoLogBlocked'
Blocked NUM_2 times last second'            
                                            Event Type
Description                                 
                                            `Checkpoint'
Undo logging is blocked because the log     
buffer is close to overflowing.             Priority
                                            
                                            7
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Start initiated VERSION'     `NDBStartStarted'
                                            
Description                                 Event Type
                                            
Data node NODE_ID, running *Note `NDB':     `StartUp'
mysql-cluster. version VERSION, is          
beginning its startup process.              Priority
                                            
                                            1
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Started VERSION'             `NDBStartCompleted'
                                            
Description                                 Event Type
                                            
Data node NODE_ID, running *Note `NDB':     `StartUp'
mysql-cluster. version VERSION, has started 
successfully.                               Priority
                                            
                                            1
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: STTORRY received after       `STTORRYRecieved'
restart finished'                           
                                            Event Type
Description                                 
                                            `StartUp'
The node has received a signal indicating   
that a cluster restart has completed.       Priority
                                            
                                            15
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Start phase PHASE completed  `StartPhaseCompleted'
(TYPE)'                                     
                                            Event Type
Description                                 
                                            `StartUp'
The node has completed start phase PHASE    
of a TYPE start. For a listing of start     Priority
phases, see *Note                           
mysql-cluster-start-phases::.  (TYPE is     4
one of `initial', `system', `node',         
`initial node', or `<Unknown>'.)            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: CM_REGCONF president =       `CM_REGCONF'
PRESIDENT_ID, own Node = OWN_ID, our        
dynamic id = DYNAMIC_ID'                    Event Type
                                            
Description                                 `StartUp'
                                            
Node PRESIDENT_ID has been selected as      Priority
`president'.  OWN_ID and DYNAMIC_ID should  
always be the same as the ID (NODE_ID) of   3
the reporting node.                         
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: CM_REGREF from Node          `CM_REGREF'
PRESIDENT_ID to our Node NODE_ID. Cause =   
CAUSE'                                      Event Type
                                            
Description                                 `StartUp'
                                            
The reporting node (ID NODE_ID) was unable  Priority
to accept node PRESIDENT_ID as president.   
The CAUSE of the problem is given as one of 8
`Busy', `Election with wait = false', `Not  
president', `Election without selecting new Severity
candidate', or `No such cause'.             
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: We are Node OWN_ID with      `FIND_NEIGHBOURS'
dynamic ID DYNAMIC_ID, our left neighbor    
is Node ID_1, our right is Node ID_2'       Event Type
                                            
Description                                 `StartUp'
                                            
The node has discovered its neighboring     Priority
nodes in the cluster (node ID_1 and node    
ID_2).  NODE_ID, OWN_ID, and DYNAMIC_ID     8
should always be the same; if they are      
not, this indicates a serious               Severity
misconfiguration of the cluster nodes.      
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: TYPE shutdown initiated'     `NDBStopStarted'
                                            
Description                                 Event Type
                                            
The node has received a shutdown signal.    `StartUp'
The TYPE of shutdown is either `Cluster' or 
`Node'.                                     Priority
                                            
                                            1
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Node shutdown completed '[`, `NDBStopCompleted'
ACTION'] [`Initiated by signal SIGNAL.']    
                                            Event Type
Description                                 
                                            `StartUp'
The node has been shut down. This report    
may include an ACTION, which if present is  Priority
one of `restarting', `no start', or         
`initial'. The report may also include a    1
reference to an *Note `NDB':                
mysql-cluster. Protocol SIGNAL; for         Severity
possible signals, refer to Operations and   
Signals                                     `INFO'
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals-ndb-protocol-operations-signals.html).
Log Message                                 Event Name
                                            
`Node NODE_ID: Forced node shutdown         `NDBStopForced'
completed '[`, action']`.' [`Occured        
during startphase START_PHASE.'] [`         Event Type
Initiated by SIGNAL.'] [`Caused by error    
ERROR_CODE:                                 `StartUp'
'ERROR_MESSAGE(ERROR_CLASSIFICATION).       
ERROR_STATUS'.' [`(extra info               Priority
EXTRA_CODE)']]                              
                                            1
Description                                 
                                            Severity
The node has been forcibly shut down. The   
ACTION (one of `restarting', `no start',    `ALERT'
or `initial') subsequently being taken, if  
any, is also reported.  If the shutdown     
occurred while the node was starting, the   
report includes the START_PHASE during      
which the node failed. If this was a        
result of a SIGNAL sent to the node, this   
information is also provided (see           
Operations and Signals                      
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals-ndb-protocol-operations-signals.html),
for more information). If the error         
causing the failure is known, this is also  
included; for more information about *Note  
`NDB': mysql-cluster.  error messages and   
classifications, see MySQL Cluster API      
Errors                                      
(http://dev.mysql.com/doc/ndbapi/en/ndb-errors.html).
Log Message                                 Event Name
                                            
`Node NODE_ID: Node shutdown aborted'       `NDBStopAborted'
                                            
Description                                 Event Type
                                            
The node shutdown process was aborted by    `StartUp'
the user.                                   
                                            Priority
                                            
                                            1
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: StartLog: [GCI Keep:         `StartREDOLog'
KEEP_POS LastCompleted: LAST_POS            
NewestRestorable: RESTORE_POS]'             Event Type
                                            
Description                                 `StartUp'
                                            
This reports global checkpoints referenced  Priority
during a node start. The redo log prior to  
KEEP_POS is dropped.  LAST_POS is the last  4
global checkpoint in which data node the    
participated; RESTORE_POS is the global     Severity
checkpoint which is actually used to        
restore all data nodes.                     `INFO'
Log Message                                 Event Name
                                            
STARTUP_MESSAGE [_Listed separately; see    `StartReport'
below._]                                    
                                            Event Type
Description                                 
                                            `StartUp'
There are a number of possible startup      
messages that can be logged under           Priority
different circumstances.                    
                                            4
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Node restart completed copy  `NR_CopyDict'
of dictionary information'                  
                                            Event Type
Description                                 
                                            `NodeRestart'
Copying of data dictionary information to   
the restarted node has been completed.      Priority
                                            
                                            8
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Node restart completed copy  `NR_CopyDistr'
of distribution information'                
                                            Event Type
Description                                 
                                            `NodeRestart'
Copying of data distribution information    
to the restarted node has been completed.   Priority
                                            
                                            8
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Node restart starting to     `NR_CopyFragsStarted'
copy the fragments to Node NODE_ID'         
                                            Event Type
Description                                 
                                            `NodeRestart'
Copy of fragments to starting data node     
NODE_ID has begun                           Priority
                                            
                                            8
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Table ID = TABLE_ID,         `NR_CopyFragDone'
fragment ID = FRAGMENT_ID have been copied  
to Node NODE_ID'                            Event Type
                                            
Description                                 `NodeRestart'
                                            
Fragment FRAGMENT_ID from table TABLE_ID    Priority
has been copied to data node NODE_ID        
                                            10
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Node restart completed       `NR_CopyFragsCompleted'
copying the fragments to Node NODE_ID'      
                                            Event Type
Description                                 
                                            `NodeRestart'
Copying of all table fragments to           
restarting data node NODE_ID has been       Priority
completed                                   
                                            8
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
Any of the following:                       `NodeFailCompleted'
                                            
  1. `Node NODE_ID: Node NODE1_ID completed Event Type
     failure of Node NODE2_ID'              
                                            `NodeRestart'
  2. `All nodes completed failure of Node   
     NODE_ID'                               Priority
                                            
  3. `Node failure of NODE_IDBLOCK          8
     completed'                             
Description                                 Severity
                                            
One of the following (each corresponding    `ALERT'
to the same-numbered message listed above): 
                                            
  1. Data node NODE1_ID has detected the    
     failure of data node NODE2_ID          
                                            
  2. All (remaining) data nodes have        
     detected the failure of data node      
     NODE_ID                                
                                            
  3. The failure of data node NODE_ID has   
     been detected in the BLOCK*Note        
     `NDB': mysql-cluster.  kernel block,   
     where block is 1 of `DBTC', `DBDICT',  
     `DBDIH', or `DBLQH'; for more          
     information, see `NDB' Kernel Blocks   
     (http://dev.mysql.com/doc/ndbapi/en/ndb-internals-kernel-blocks.html)
Log Message                                 Event Name
                                            
`Node MGM_NODE_ID: Node DATA_NODE_ID has    `NODE_FAILREP'
failed.  The Node state at failure was      
STATE_CODE'                                 Event Type
                                            
Description                                 `NodeRestart'
                                            
A data node has failed. Its state at the    Priority
time of failure is described by an          
arbitration state code STATE_CODE: possible 8
state code values can be found in the file  
`include/kernel/signaldata/ArbitSignalData.hpp'.Severity
                                            
                                            `ALERT'
Log Message                                 Event Name
                                            
`President restarts arbitration thread      `ArbitState'
[state=STATE_CODE]' or `Prepare arbitrator  
node NODE_ID [ticket=TICKET_ID]' or         Event Type
`Receive arbitrator node NODE_ID            
[ticket=TICKET_ID]' or `Started arbitrator  `NodeRestart'
node NODE_ID [ticket=TICKET_ID]' or `Lost   
arbitrator node NODE_ID - process failure   Priority
[state=STATE_CODE]' or `Lost arbitrator     
node NODE_ID - process exit                 6
[state=STATE_CODE]' or `Lost arbitrator     
node NODE_ID - ERROR_MESSAGE                Severity
[state=STATE_CODE]'                         
                                            `INFO'
Description                                 
                                            
This is a report on the current state and   
progress of arbitration in the cluster.     
NODE_ID is the node ID of the management    
node or SQL node selected as the            
arbitrator. STATE_CODE is an arbitration    
state code, as found in                     
`include/kernel/signaldata/ArbitSignalData.hpp'.
When an error has occurred, an              
ERROR_MESSAGE, also defined in              
`ArbitSignalData.hpp', is provided.         
TICKET_ID is a unique identifier handed     
out by the arbitrator when it is selected   
to all the nodes that participated in its   
selection; this is used to ensure that      
each node requesting arbitration was one    
of the nodes that took part in the          
selection process.                          
Log Message                                 Event Name
                                            
`Arbitration check lost - less than 1/2     `ArbitResult'
nodes left' or `Arbitration check won -     
all node groups and more than 1/2 nodes     Event Type
left' or `Arbitration check won - node      
group majority' or `Arbitration check lost  `NodeRestart'
- missing node group' or `Network           
partitioning - arbitration required' or     Priority
`Arbitration won - positive reply from node 
NODE_ID' or `Arbitration lost - negative    2
reply from node NODE_ID' or `Network        
partitioning - no arbitrator available' or  Severity
`Network partitioning - no arbitrator       
configured' or `Arbitration failure -       `ALERT'
ERROR_MESSAGE [state=STATE_CODE]'           
                                            
Description                                 
                                            
This message reports on the result of       
arbitration.  In the event of arbitration   
failure, an ERROR_MESSAGE and an            
arbitration STATE_CODE are provided;        
definitions for both of these are found in  
`include/kernel/signaldata/ArbitSignalData.hpp'.
Log Message                                 Event Name
                                            
`Node NODE_ID: GCP Take over started'       `GCP_TakeoverStarted'
                                            
Description                                 Event Type
                                            
This node is attempting to assume           `NodeRestart'
responsibility for the next global          
checkpoint (that is, it is becoming the     Priority
master node)                                
                                            7
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: GCP Take over completed'     `GCP_TakeoverCompleted'
                                            
Description                                 Event Type
                                            
This node has become the master, and has    `NodeRestart'
assumed responsibility for the next global  
checkpoint                                  Priority
                                            
                                            7
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: LCP Take over started'       `LCP_TakeoverStarted'
                                            
Description                                 Event Type
                                            
This node is attempting to assume           `NodeRestart'
responsibility for the next set of local    
checkpoints (that is, it is becoming the    Priority
master node)                                
                                            7
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: LCP Take over completed'     `LCP_TakeoverCompleted'
                                            
Description                                 Event Type
                                            
This node has become the master, and has    `NodeRestart'
assumed responsibility for the next set of  
local checkpoints                           Priority
                                            
                                            7
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Trans. Count =               `TransReportCounters'
TRANSACTIONS, Commit Count = COMMITS, Read  
Count = READS, Simple Read Count =          Event Type
SIMPLE_READS, Write Count = WRITES,         
AttrInfo Count = ATTRINFO_OBJECTS,          `Statistic'
Concurrent Operations =                     
CONCURRENT_OPERATIONS, Abort Count =        Priority
ABORTS, Scans = SCANS, Range scans =        
RANGE_SCANS'                                8
                                            
Description                                 Severity
                                            
This report of transaction activity is      `INFO'
given approximately once every 10 seconds   
Log Message                                 Event Name
                                            
`Node NODE_ID: Operations=OPERATIONS'       `OperationReportCounters'
                                            
Description                                 Event Type
                                            
Number of operations performed by this      `Statistic'
node, provided approximately once every 10  
seconds                                     Priority
                                            
                                            8
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Table with ID = TABLE_ID     `TableCreated'
created'                                    
                                            Event Type
Description                                 
                                            `Statistic'
A table having the table ID shown has been  
created                                     Priority
                                            
                                            7
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Mean loop Counter in doJob   `JobStatistic'
last 8192 times = COUNT'                    
                                            Event Type
Description                                 
                                            `Statistic'
                                            
                                            Priority
                                            
                                            9
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Mean send size to Node = NODE_ID last      `SendBytesStatistic'
4096 sends = BYTES bytes'                   
                                            Event Type
Description                                 
                                            `Statistic'
This node is sending an average of BYTES    
bytes per send to node NODE_ID              Priority
                                            
                                            9
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Mean receive size to Node = NODE_ID last   `ReceiveBytesStatistic'
4096 sends = BYTES bytes'                   
                                            Event Type
Description                                 
                                            `Statistic'
This node is receiving an average of BYTES  
of data each time it receives data from     Priority
node NODE_ID                                
                                            9
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Data usage is                `MemoryUsage'
DATA_MEMORY_PERCENTAGE% (DATA_PAGES_USED    
32K pages of total DATA_PAGES_TOTAL)' /     Event Type
`Node NODE_ID: Index usage is               
INDEX_MEMORY_PERCENTAGE% (INDEX_PAGES_USED  `Statistic'
8K pages of total INDEX_PAGES_TOTAL) '      
                                            Priority
Description                                 
                                            5
This report is generated when a `DUMP       
1000' command is issued in the cluster      Severity
management client; for more information,    
see `DUMP 1000'                             `INFO'
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals-dump-command-1000.html),
in MySQL Cluster Internals                  
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals.html)
Log Message                                 Event Name
                                            
`Node NODE1_ID: Transporter to node         `TransporterError'
NODE2_ID reported error ERROR_CODE:         
ERROR_MESSAGE'                              Event Type
                                            
Description                                 `Error'
                                            
A transporter error occurred while          Priority
communicating with node NODE2_ID; for a     
listing of transporter error codes and      2
messages, see `NDB' Transporter Errors      
(http://dev.mysql.com/doc/ndbapi/en/ndb-transporter-errors.html),Severity
in MySQL Cluster Internals                  
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals.html)`ERROR'
Log Message                                 Event Name
                                            
`Node NODE1_ID: Transporter to node         `TransporterWarning'
NODE2_ID reported error ERROR_CODE:         
ERROR_MESSAGE'                              Event Type
                                            
Description                                 `Error'
                                            
A warning of a potential transporter        Priority
problem while communicating with node       
NODE2_ID; for a listing of transporter      8
error codes and messages, see `NDB'         
Transporter Errors                          Severity
(http://dev.mysql.com/doc/ndbapi/en/ndb-transporter-errors.html),
for more information                        `WARNING'
Log Message                                 Event Name
                                            
`Node NODE1_ID: Node NODE2_ID missed        `MissedHeartbeat'
heartbeat HEARTBEAT_ID'                     
                                            Event Type
Description                                 
                                            `Error'
This node missed a heartbeat from node      
NODE2_ID                                    Priority
                                            
                                            8
                                            
                                            Severity
                                            
                                            `WARNING'
Log Message                                 Event Name
                                            
`Node NODE1_ID: Node NODE2_ID declared      `DeadDueToHeartbeat'
dead due to missed heartbeat'               
                                            Event Type
Description                                 
                                            `Error'
This node has missed at least 3 heartbeats  
from node NODE2_ID, and so has declared     Priority
that node `dead'                            
                                            8
                                            
                                            Severity
                                            
                                            `ALERT'
Log Message                                 Event Name
                                            
`Node NODE1_ID: Node Sent Heartbeat to      `SentHeartbeat'
node = NODE2_ID'                            
                                            Event Type
Description                                 
                                            `Info'
This node has sent a heartbeat to node      
NODE2_ID                                    Priority
                                            
                                            12
                                            
                                            Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Event buffer status:         `EventBufferStatus'
used=BYTES_USED (PERCENT_USED%)             
alloc=BYTES_ALLOCATED (PERCENT_AVAILABLE%)  Event Type
max=BYTES_AVAILABLE                         
apply_gci=LATEST_RESTORABLE_GCI             `Info'
latest_gci=LATEST_GCI'                      
                                            Priority
Description                                 
                                            7
This report is seen during heavy event      
buffer usage, for example, when many        Severity
updates are being applied in a relatively   
short period of time; the report shows the  `INFO'
number of bytes and the percentage of event 
buffer memory used, the bytes allocated and 
percentage still available, and the latest  
and latest restorable global checkpoints    
Log Message                                 Event Name
                                            
`Node NODE_ID: Entering single user mode',  `SingleUser'
`Node NODE_ID: Entered single user mode     
Node API_NODE_ID has exclusive access',     Event Type
`Node NODE_ID: Entering single user mode'   
                                            `Info'
Description                                 
                                            Priority
These reports are written to the cluster    
log when entering and exiting single user   7
mode; API_NODE_ID is the node ID of the     
API or SQL having exclusive access to the   Severity
cluster (for more information, see *Note    
mysql-cluster-single-user-mode::); the      `INFO'
message `Unknown single user report         
API_NODE_ID' indicates an error has taken   
place and should never be seen in normal    
operation                                   
Log Message                                 Event Name
                                            
`Node NODE_ID: Backup BACKUP_ID started     `BackupStarted'
from node MGM_NODE_ID'                      
                                            Event Type
Description                                 
                                            `Backup'
A backup has been started using the         
management node having MGM_NODE_ID; this    Priority
message is also displayed in the cluster    
management client when the `START BACKUP'   7
command is issued; for more information,    
see *Note                                   Severity
mysql-cluster-backup-using-management-client::
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Backup BACKUP_ID started     `BackupCompleted'
from node MGM_NODE_ID completed. StartGCP:  
START_GCP StopGCP: STOP_GCP #Records:       Event Type
RECORDS #LogRecords: LOG_RECORDS Data:      
DATA_BYTES bytes Log: LOG_BYTES bytes'      `Backup'
                                            
Description                                 Priority
                                            
The backup having the ID BACKUP_ID has been 7
completed; for more information, see *Note  
mysql-cluster-backup-using-management-client::Severity
                                            
                                            `INFO'
Log Message                                 Event Name
                                            
`Node NODE_ID: Backup request from          `BackupFailedToStart'
MGM_NODE_ID failed to start. Error:         
ERROR_CODE'                                 Event Type
                                            
Description                                 `Backup'
                                            
The backup failed to start; for error       Priority
codes, see MGM`' API Errors                 
(http://dev.mysql.com/doc/ndbapi/en/mgm-errors.html)7
                                            
                                            Severity
                                            
                                            `ALERT'
Log Message                                 Event Name
                                            
`Node NODE_ID: Backup BACKUP_ID started     `BackupAborted'
from MGM_NODE_ID has been aborted. Error:   
ERROR_CODE'                                 Event Type
                                            
Description                                 `Backup'
                                            
The backup was terminated after starting,   Priority
possibly due to user intervention           
                                            7
                                            
                                            Severity
                                            
                                            `ALERT'


File: manual.info,  Node: mysql-cluster-ndb-transporter-errors,  Prev: mysql-cluster-logs-cluster-log,  Up: mysql-cluster-logs-ndb-messages

17.5.7.2 MySQL Cluster: `NDB' Transporter Errors
................................................

This section lists error codes, names, and messages that are written to
the cluster log in the event of transporter errors.

This table lists error codes along with error names and error text that
are written to the cluster log in the event of transporter errors.

Error   Error Name                                  Error Text
Code                                                
0x00    TE_NO_ERROR                                 `No error'
0x01    TE_ERROR_CLOSING_SOCKET                     `Error found during
                                                    closing of socket'
0x02    TE_ERROR_IN_SELECT_BEFORE_ACCEPT            `Error found before
                                                    accept. The
                                                    transporter will
                                                    retry'
0x03    TE_INVALID_MESSAGE_LENGTH                   `Error found in
                                                    message (invalid
                                                    message length)'
0x04    TE_INVALID_CHECKSUM                         `Error found in
                                                    message (checksum)'
0x05    TE_COULD_NOT_CREATE_SOCKET                  `Error found while
                                                    creating socket(can't
                                                    create socket)'
0x06    TE_COULD_NOT_BIND_SOCKET                    `Error found while
                                                    binding server socket'
0x07    TE_LISTEN_FAILED                            `Error found while
                                                    listening to server
                                                    socket'
0x08    TE_ACCEPT_RETURN_ERROR                      `Error found during
                                                    accept(accept return
                                                    error)'
0x0b    TE_SHM_DISCONNECT                           `The remote node has
                                                    disconnected'
0x0c    TE_SHM_IPC_STAT                             `Unable to check shm
                                                    segment'
0x0d    TE_SHM_UNABLE_TO_CREATE_SEGMENT             `Unable to create shm
                                                    segment'
0x0e    TE_SHM_UNABLE_TO_ATTACH_SEGMENT             `Unable to attach shm
                                                    segment'
0x0f    TE_SHM_UNABLE_TO_REMOVE_SEGMENT             `Unable to remove shm
                                                    segment'
0x10    TE_TOO_SMALL_SIGID                          `Sig ID too small'
0x11    TE_TOO_LARGE_SIGID                          `Sig ID too large'
0x12    TE_WAIT_STACK_FULL                          `Wait stack was full'
0x13    TE_RECEIVE_BUFFER_FULL                      `Receive buffer was
                                                    full'
0x14    TE_SIGNAL_LOST_SEND_BUFFER_FULL             `Send buffer was
                                                    full,and trying to
                                                    force send fails'
0x15    TE_SIGNAL_LOST                              `Send failed for
                                                    unknown reason(signal
                                                    lost)'
0x16    TE_SEND_BUFFER_FULL                         `The send buffer was
                                                    full, but sleeping
                                                    for a while solved'
0x0017  TE_SCI_LINK_ERROR                           `There is no link
                                                    from this node to the
                                                    switch'
0x18    TE_SCI_UNABLE_TO_START_SEQUENCE             `Could not start a
                                                    sequence, because
                                                    system resources are
                                                    exumed or no sequence
                                                    has been created'
0x19    TE_SCI_UNABLE_TO_REMOVE_SEQUENCE            `Could not remove a
                                                    sequence'
0x1a    TE_SCI_UNABLE_TO_CREATE_SEQUENCE            `Could not create a
                                                    sequence, because
                                                    system resources are
                                                    exempted. Must reboot'
0x1b    TE_SCI_UNRECOVERABLE_DATA_TFX_ERROR         `Tried to send data
                                                    on redundant link but
                                                    failed'
0x1c    TE_SCI_CANNOT_INIT_LOCALSEGMENT             `Cannot initialize
                                                    local segment'
0x1d    TE_SCI_CANNOT_MAP_REMOTESEGMENT             `Cannot map remote
                                                    segment'
0x1e    TE_SCI_UNABLE_TO_UNMAP_SEGMENT              `Cannot free the
                                                    resources used by
                                                    this segment (step 1)'
0x1f    TE_SCI_UNABLE_TO_REMOVE_SEGMENT             `Cannot free the
                                                    resources used by
                                                    this segment (step 2)'
0x20    TE_SCI_UNABLE_TO_DISCONNECT_SEGMENT         `Cannot disconnect
                                                    from a remote segment'
0x21    TE_SHM_IPC_PERMANENT                        `Shm ipc Permanent
                                                    error'
0x22    TE_SCI_UNABLE_TO_CLOSE_CHANNEL              `Unable to close the
                                                    sci channel and the
                                                    resources allocated'


File: manual.info,  Node: mysql-cluster-single-user-mode,  Next: mysql-cluster-sql-statements,  Prev: mysql-cluster-logs-ndb-messages,  Up: mysql-cluster-management

17.5.8 MySQL Cluster Single User Mode
-------------------------------------

_Single user mode_ enables the database administrator to restrict
access to the database system to a single API node, such as a MySQL
server (SQL node) or an instance of *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. When entering single user mode,
connections to all other API nodes are closed gracefully and all
running transactions are aborted. No new transactions are permitted to
start.

Once the cluster has entered single user mode, only the designated API
node is granted access to the database.

You can use the `ALL STATUS' command in the *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm. client to see when the cluster has
entered single user mode. You can also check the `status' column of the
*Note `ndbinfo.nodes': mysql-cluster-ndbinfo-nodes. table (see *Note
mysql-cluster-ndbinfo-nodes::, for more information).

Example:

     ndb_mgm> ENTER SINGLE USER MODE 5

After this command has executed and the cluster has entered single user
mode, the API node whose node ID is `5' becomes the cluster's only
permitted user.

The node specified in the preceding command must be an API node;
attempting to specify any other type of node will be rejected.

*Note*:

When the preceding command is invoked, all transactions running on the
designated node are aborted, the connection is closed, and the server
must be restarted.

The command `EXIT SINGLE USER MODE' changes the state of the cluster's
data nodes from single user mode to normal mode. API nodes--such as
MySQL Servers--waiting for a connection (that is, waiting for the
cluster to become ready and available), are again permitted to connect.
The API node denoted as the single-user node continues to run (if still
connected) during and after the state change.

Example:

     ndb_mgm> EXIT SINGLE USER MODE

There are two recommended ways to handle a node failure when running in
single user mode:

   * Method 1:

       1. Finish all single user mode transactions

       2. Issue the `EXIT SINGLE USER MODE' command

       3. Restart the cluster's data nodes

   * Method 2:

     Restart database nodes prior to entering single user mode.


File: manual.info,  Node: mysql-cluster-sql-statements,  Next: mysql-cluster-ndbinfo,  Prev: mysql-cluster-single-user-mode,  Up: mysql-cluster-management

17.5.9 Quick Reference: MySQL Cluster SQL Statements
----------------------------------------------------

This section discusses several SQL statements that can prove useful in
managing and monitoring a MySQL server that is connected to a MySQL
Cluster, and in some cases provide information about the cluster itself.

   * *Note `SHOW ENGINE NDB STATUS': show-engine, *Note `SHOW ENGINE
     NDBCLUSTER STATUS': show-engine.

     The output of this statement contains information about the
     server's connection to the cluster, creation and usage of MySQL
     Cluster objects, and binary logging for MySQL Cluster replication.

     See *Note show-engine::, for a usage example and more detailed
     information.

   * *Note `SHOW ENGINES': show-engines.

     This statement can be used to determine whether or not clustering
     support is enabled in the MySQL server, and if so, whether it is
     active.

     See *Note show-engines::, for more detailed information.

     *Note*:

     In MySQL 5.1 and later, this statement does not support a `LIKE'
     clause. However, you can use `LIKE' to filter queries against the
     *Note `INFORMATION_SCHEMA.ENGINES': engines-table, as discussed in
     the next item.

   * `SELECT * FROM INFORMATION_SCHEMA.ENGINES [WHERE ENGINE LIKE
     'NDB%']'

     This is the equivalent of *Note `SHOW ENGINES': show-engines, but
     uses the *Note `ENGINES': engines-table. table of the
     `INFORMATION_SCHEMA' database. Unlike the case with the *Note
     `SHOW ENGINES': show-engines.  statement, it is possible to filter
     the results using a `LIKE' clause, and to select specific columns
     to obtain information that may be of use in scripts. For example,
     the following query shows whether the server was built with *Note
     `NDB': mysql-cluster. support and, if so, whether it is enabled:

          mysql> SELECT SUPPORT FROM INFORMATION_SCHEMA.ENGINES
              ->   WHERE ENGINE LIKE 'NDB%';
          +---------+
          | support |
          +---------+
          | ENABLED |
          +---------+

     See *Note engines-table::, for more information.

   * `SHOW VARIABLES LIKE 'NDB%''

     This statement provides a list of most server system variables
     relating to the *Note `NDB': mysql-cluster. storage engine, and
     their values, as shown here:

          mysql> SHOW VARIABLES LIKE 'NDB%';
          +-------------------------------------+-------+
          | Variable_name                       | Value |
          +-------------------------------------+-------+
          | ndb_autoincrement_prefetch_sz       | 32    |
          | ndb_cache_check_time                | 0     |
          | ndb_extra_logging                   | 0     |
          | ndb_force_send                      | ON    |
          | ndb_index_stat_cache_entries        | 32    |
          | ndb_index_stat_enable               | OFF   |
          | ndb_index_stat_update_freq          | 20    |
          | ndb_report_thresh_binlog_epoch_slip | 3     |
          | ndb_report_thresh_binlog_mem_usage  | 10    |
          | ndb_use_copying_alter_table         | OFF   |
          | ndb_use_exact_count                 | ON    |
          | ndb_use_transactions                | ON    |
          +-------------------------------------+-------+

     See *Note server-system-variables::, for more information.

   * `SELECT * FROM INFORMATION_SCHEMA.GLOBAL_VARIABLES WHERE
     VARIABLE_NAME LIKE 'NDB%';'

     This statement is the equivalent of the `SHOW' command described
     in the previous item, and provides almost identical output, as
     shown here:

          mysql> SELECT * FROM INFORMATION_SCHEMA.GLOBAL_VARIABLES
              ->   WHERE VARIABLE_NAME LIKE 'NDB%';
          +-------------------------------------+----------------+
          | VARIABLE_NAME                       | VARIABLE_VALUE |
          +-------------------------------------+----------------+
          | NDB_AUTOINCREMENT_PREFETCH_SZ       | 32             |
          | NDB_CACHE_CHECK_TIME                | 0              |
          | NDB_EXTRA_LOGGING                   | 0              |
          | NDB_FORCE_SEND                      | ON             |
          | NDB_INDEX_STAT_CACHE_ENTRIES        | 32             |
          | NDB_INDEX_STAT_ENABLE               | OFF            |
          | NDB_INDEX_STAT_UPDATE_FREQ          | 20             |
          | NDB_REPORT_THRESH_BINLOG_EPOCH_SLIP | 3              |
          | NDB_REPORT_THRESH_BINLOG_MEM_USAGE  | 10             |
          | NDB_USE_COPYING_ALTER_TABLE         | OFF            |
          | NDB_USE_EXACT_COUNT                 | ON             |
          | NDB_USE_TRANSACTIONS                | ON             |
          +-------------------------------------+----------------+

     Unlike the case with the `SHOW' command, it is possible to select
     individual columns. For example:

          mysql> SELECT VARIABLE_VALUE
              ->   FROM INFORMATION_SCHEMA.GLOBAL_VARIABLES
              ->   WHERE VARIABLE_NAME = 'ndb_force_send';
          +----------------+
          | VARIABLE_VALUE |
          +----------------+
          | ON             |
          +----------------+

     See *Note variables-table::, and *Note server-system-variables::,
     for more information.

   * `SHOW STATUS LIKE 'NDB%''

     This statement shows at a glance whether or not the MySQL server
     is acting as a cluster SQL node, and if so, it provides the MySQL
     server's cluster node ID, the host name and port for the cluster
     management server to which it is connected, and the number of data
     nodes in the cluster, as shown here:

          mysql> SHOW STATUS LIKE 'NDB%';
          +--------------------------+---------------+
          | Variable_name            | Value         |
          +--------------------------+---------------+
          | Ndb_cluster_node_id      | 10            |
          | Ndb_config_from_host     | 192.168.0.103 |
          | Ndb_config_from_port     | 1186          |
          | Ndb_number_of_data_nodes | 4             |
          +--------------------------+---------------+

     If the MySQL server was built with clustering support, but it is
     not connected to a cluster, all rows in the output of this
     statement contain a zero or an empty string:

          mysql> SHOW STATUS LIKE 'NDB%';
          +--------------------------+-------+
          | Variable_name            | Value |
          +--------------------------+-------+
          | Ndb_cluster_node_id      | 0     |
          | Ndb_config_from_host     |       |
          | Ndb_config_from_port     | 0     |
          | Ndb_number_of_data_nodes | 0     |
          +--------------------------+-------+

     See also *Note show-status::.

   * `SELECT * FROM INFORMATION_SCHEMA.GLOBAL_STATUS WHERE
     VARIABLE_NAME LIKE 'NDB%';'

     This statement provides similar output to the `SHOW' command
     discussed in the previous item. However, unlike the case with
     *Note `SHOW STATUS': show-status, it is possible using the *Note
     `SELECT': select. to extract values in SQL for use in scripts for
     monitoring and automation purposes.

     See *Note status-table::, for more information.

You can also query the tables in the *Note `ndbinfo':
mysql-cluster-ndbinfo. information database for real-time data about
many MySQL Cluster operations. See *Note mysql-cluster-ndbinfo::.


File: manual.info,  Node: mysql-cluster-ndbinfo,  Next: mysql-cluster-security,  Prev: mysql-cluster-sql-statements,  Up: mysql-cluster-management

17.5.10 The `ndbinfo' MySQL Cluster Information Database
--------------------------------------------------------

* Menu:

* mysql-cluster-ndbinfo-arbitrator-validity-detail::  The `ndbinfo arbitrator_validity_detail' Table
* mysql-cluster-ndbinfo-arbitrator-validity-summary::  The `ndbinfo arbitrator_validity_summary' Table
* mysql-cluster-ndbinfo-blocks::  The `ndbinfo blocks' Table
* mysql-cluster-ndbinfo-cluster-operations::  The `ndbinfo cluster_operations' Table
* mysql-cluster-ndbinfo-cluster-transactions::  The `ndbinfo cluster_transactions' Table
* mysql-cluster-ndbinfo-config-params::  The `ndbinfo config_params' Table
* mysql-cluster-ndbinfo-counters::  The `ndbinfo counters' Table
* mysql-cluster-ndbinfo-diskpagebuffer::  The `ndbinfo diskpagebuffer' Table
* mysql-cluster-ndbinfo-logbuffers::  The `ndbinfo logbuffers' Table
* mysql-cluster-ndbinfo-logspaces::  The `ndbinfo logspaces' Table
* mysql-cluster-ndbinfo-membership::  The `ndbinfo membership' Table
* mysql-cluster-ndbinfo-memoryusage::  The `ndbinfo memoryusage' Table
* mysql-cluster-ndbinfo-nodes::  The `ndbinfo nodes' Table
* mysql-cluster-ndbinfo-resources::  The `ndbinfo resources' Table
* mysql-cluster-ndbinfo-server-operations::  The `ndbinfo server_operations' Table
* mysql-cluster-ndbinfo-server-transactions::  The `ndbinfo server_transactions' Table
* mysql-cluster-ndbinfo-threadblocks::  The `ndbinfo threadblocks' Table
* mysql-cluster-ndbinfo-threadstat::  The `ndbinfo threadstat' Table
* mysql-cluster-ndbinfo-transporters::  The `ndbinfo transporters' Table

`ndbinfo' is a database storing containing information specific to
MySQL Cluster.

This database contains a number of tables, each providing a different
sort of data about MySQL Cluster node status, resource usage, and
operations. You can find more detailed information about each of these
tables in the next several sections.

`ndbinfo' is included with MySQL Cluster support in the MySQL Server;
no special compilation or configuration steps are required; the tables
are created by the MySQL Server when it connects to the cluster. You
can verify that `ndbinfo' support is active in a given MySQL Server
instance using *Note `SHOW PLUGINS': show-plugins.; if `ndbinfo'
support is enabled, you should see a row containing `ndbinfo' in the
`Name' column and `ACTIVE' in the `Status' column, as shown here
(emphasized text):

     mysql> SHOW PLUGINS;
     +----------------------------------+--------+--------------------+---------+---------+
     | Name                             | Status | Type               | Library | License |
     +----------------------------------+--------+--------------------+---------+---------+
     | binlog                           | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | mysql_native_password            | ACTIVE | AUTHENTICATION     | NULL    | GPL     |
     | mysql_old_password               | ACTIVE | AUTHENTICATION     | NULL    | GPL     |
     | CSV                              | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | MEMORY                           | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | MRG_MYISAM                       | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | MyISAM                           | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | PERFORMANCE_SCHEMA               | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | BLACKHOLE                        | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | ARCHIVE                          | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | ndbcluster                       | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     _| ndbinfo                          | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |_
     | ndb_transid_mysql_connection_map | ACTIVE | INFORMATION SCHEMA | NULL    | GPL     |
     | InnoDB                           | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | INNODB_TRX                       | ACTIVE | INFORMATION SCHEMA | NULL    | GPL     |
     | INNODB_LOCKS                     | ACTIVE | INFORMATION SCHEMA | NULL    | GPL     |
     | INNODB_LOCK_WAITS                | ACTIVE | INFORMATION SCHEMA | NULL    | GPL     |
     | INNODB_CMP                       | ACTIVE | INFORMATION SCHEMA | NULL    | GPL     |
     | INNODB_CMP_RESET                 | ACTIVE | INFORMATION SCHEMA | NULL    | GPL     |
     | INNODB_CMPMEM                    | ACTIVE | INFORMATION SCHEMA | NULL    | GPL     |
     | INNODB_CMPMEM_RESET              | ACTIVE | INFORMATION SCHEMA | NULL    | GPL     |
     | partition                        | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     +----------------------------------+--------+--------------------+---------+---------+
     22 rows in set (0.00 sec)

You can also do this by checking the output of *Note `SHOW ENGINES':
show-engines. for a line including `ndbinfo' in the `Engine' column and
`YES' in the `Support' column, as shown here (emphasized text):

     mysql> SHOW ENGINES\G
     *************************** 1. row ***************************
           Engine: ndbcluster
          Support: YES
          Comment: Clustered, fault-tolerant tables
     Transactions: YES
               XA: NO
       Savepoints: NO
     *************************** 2. row ***************************
           Engine: MRG_MYISAM
          Support: YES
          Comment: Collection of identical MyISAM tables
     Transactions: NO
               XA: NO
       Savepoints: NO
     _*************************** 3. row ***************************
           Engine: ndbinfo
          Support: YES
          Comment: MySQL Cluster system information storage engine
     Transactions: NO
               XA: NO
       Savepoints: NO_
     *************************** 4. row ***************************
           Engine: CSV
          Support: YES
          Comment: CSV storage engine
     Transactions: NO
               XA: NO
       Savepoints: NO
     *************************** 5. row ***************************
           Engine: MEMORY
          Support: YES
          Comment: Hash based, stored in memory, useful for temporary tables
     Transactions: NO
               XA: NO
       Savepoints: NO
     *************************** 6. row ***************************
           Engine: FEDERATED
          Support: NO
          Comment: Federated MySQL storage engine
     Transactions: NULL
               XA: NULL
       Savepoints: NULL
     *************************** 7. row ***************************
           Engine: ARCHIVE
          Support: YES
          Comment: Archive storage engine
     Transactions: NO
               XA: NO
       Savepoints: NO
     *************************** 8. row ***************************
           Engine: InnoDB
          Support: YES
          Comment: Supports transactions, row-level locking, and foreign keys
     Transactions: YES
               XA: YES
       Savepoints: YES
     *************************** 9. row ***************************
           Engine: MyISAM
          Support: DEFAULT
          Comment: Default engine as of MySQL 3.23 with great performance
     Transactions: NO
               XA: NO
       Savepoints: NO
     *************************** 10. row ***************************
           Engine: BLACKHOLE
          Support: YES
          Comment: /dev/null storage engine (anything you write to it disappears)
     Transactions: NO
               XA: NO
       Savepoints: NO
     10 rows in set (0.00 sec)

If `ndbinfo' support is enabled, then you can access `ndbinfo' using
SQL statements in *Note `mysql': mysql. or another MySQL client. For
example, you can see `ndbinfo' listed in the output of *Note `SHOW
DATABASES': show-databases, as shown here:

     mysql> SHOW DATABASES;
     +--------------------+
     | Database           |
     +--------------------+
     | information_schema |
     | mysql              |
     | ndbinfo            |
     | test               |
     +--------------------+
     4 rows in set (0.00 sec)

If the *Note `mysqld': mysqld. process was not started with the
`--ndbcluster' option, `ndbinfo' is not available and is not displayed
by *Note `SHOW DATABASES': show-databases. If *Note `mysqld': mysqld.
was formerly connected to a MySQL Cluster but the cluster becomes
unavailable (due to events such as cluster shutdown, loss of network
connectivity, and so forth), `ndbinfo' and its tables remain visible,
but an attempt to access any tables (other than `blocks' or
`config_params') fails with `Got error 157 'Connection to NDB failed'
from NDBINFO'.

With the exception of the `blocks' and `config_params' tables, what we
refer to as `ndbinfo' `tables' are actually views generated from
internal *Note `NDB': mysql-cluster.  tables not normally visible to
the MySQL Server.

All `ndbinfo' tables are read-only, and are generated on demand when
queried. Because many of them are generated in parallel by the data
nodes while other are specific to a given SQL node, they are not
guaranteed to provide a consistent snapshot.

In addition, pushing down of joins is not supported on `ndbinfo'
tables; so joining large `ndbinfo' tables can require transfer of a
large amount of data to the requesting API node, even when the query
makes use of a `WHERE' clause.

`ndbinfo' tables are not included in the query cache. (Bug #59831)

You can select the `ndbinfo' database with a *Note `USE': use.
statement, and then issue a *Note `SHOW TABLES': show-tables. statement
to obtain a list of tables, just as for any other database, like this:

     mysql> USE ndbinfo;
     Database changed

     mysql> SHOW TABLES;
     +----------------------+
     | Tables_in_ndbinfo    |
     +----------------------+
     | blocks               |
     | cluster_operations   |
     | cluster_transactions |
     | config_params        |
     | counters             |
     | diskpagebuffer       |
     | logbuffers           |
     | logspaces            |
     | memoryusage          |
     | nodes                |
     | resources            |
     | server_operations    |
     | server_transactions  |
     | threadblocks         |
     | threadstat           |
     | transporters         |
     +----------------------+
     16 rows in set (0.04 sec)

The *Note `cluster_operations':
mysql-cluster-ndbinfo-cluster-operations, *Note `cluster_transactions':
mysql-cluster-ndbinfo-cluster-transactions, *Note `server_operations':
mysql-cluster-ndbinfo-server-operations, *Note `server_transactions':
mysql-cluster-ndbinfo-server-transactions, *Note `threadblocks':
mysql-cluster-ndbinfo-threadblocks, and *Note `threadstat':
mysql-cluster-ndbinfo-threadstat. tables were added in MySQL Cluster
NDB 7.2.2.

You can execute *Note `SELECT': select. statements against these
tables, just as you would normally expect:

     mysql> SELECT * FROM memoryusage;
     +---------+--------------+------+-------+
     | node_id | memory_type  | used | max   |
     +---------+--------------+------+-------+
     |       1 | Data memory  | 3230 |  6408 |
     |       2 | Data memory  | 3230 |  6408 |
     |       1 | Index memory |   16 | 12832 |
     |       2 | Index memory |   16 | 12832 |
     +---------+--------------+------+-------+
     4 rows in set (0.37 sec)

More complex queries, such as the two following *Note `SELECT': select.
statements using the *Note `memoryusage':
mysql-cluster-ndbinfo-memoryusage. table, are possible:

     mysql> SELECT SUM(used) as 'Data Memory Used, All Nodes'
          >     FROM memoryusage
          >     WHERE memory_type = 'Data memory';
     +-----------------------------+
     | Data Memory Used, All Nodes |
     +-----------------------------+
     |                        6460 |
     +-----------------------------+
     1 row in set (0.37 sec)

     mysql> SELECT SUM(max) as 'Total IndexMemory Available'
          >     FROM memoryusage
          >     WHERE memory_type = 'Index memory';
     +-----------------------------+
     | Total IndexMemory Available |
     +-----------------------------+
     |                       25664 |
     +-----------------------------+
     1 row in set (0.33 sec)

`ndbinfo' table and column names are case sensitive (as is the name of
the `ndbinfo' database itself). These identifiers are in lowercase.
Trying to use the wrong lettercase results in an error, as shown in this
example:

     mysql> SELECT * FROM nodes;
     +---------+--------+---------+-------------+
     | node_id | uptime | status  | start_phase |
     +---------+--------+---------+-------------+
     |       1 |  13602 | STARTED |           0 |
     |       2 |     16 | STARTED |           0 |
     +---------+--------+---------+-------------+
     2 rows in set (0.04 sec)

     mysql> SELECT * FROM Nodes;
     `ERROR 1146 (42S02): Table 'ndbinfo.Nodes' doesn't exist'

*Note `mysqldump': mysqldump. ignores the `ndbinfo' database entirely,
and excludes it from any output. This is true even when using the
`--databases' or `--all-databases' option.

MySQL Cluster also maintains tables in the `INFORMATION_SCHEMA'
information database, including the *Note `FILES': files-table. table
which contains information about files used for MySQL Cluster Disk Data
storage. For more information, see *Note mysql-cluster-i_s-tables::.


File: manual.info,  Node: mysql-cluster-ndbinfo-arbitrator-validity-detail,  Next: mysql-cluster-ndbinfo-arbitrator-validity-summary,  Prev: mysql-cluster-ndbinfo,  Up: mysql-cluster-ndbinfo

17.5.10.1 The `ndbinfo arbitrator_validity_detail' Table
........................................................

The `arbitrator_validity_detail' table shows the view that each data
node in the cluster of the arbitrator.  It is a subset of the *Note
`membership': mysql-cluster-ndbinfo-membership. table.

The following table provides information about the columns in the
`arbitrator_validity_detail' table. For each column, the table shows
the name, data type, and a brief description. Additional information
can be found in the notes following the table.

This table describes the columns in the `arbitrator_validity_detail'
table. The table shows the column name, data type, and provides a brief
description.

Column Name            Type               Description
`node_id'              integer            This node's node ID
`arbitrator'           integer            Node ID of arbitrator
`arb_ticket'           string             Internal identifier used to
                                          track arbitration
`arb_connected'        `Yes' or `No'      Whether this node is connected
                                          to the arbitrator
`arb_state'            Enumeration (see   Arbitration state
                       text)              

The node ID is the same as that reported by *Note `ndb_mgm -e "SHOW"':
mysql-cluster-programs-ndb-mgm.

All nodes should show the same `arbitrator' and `arb_ticket' values as
well as the same `arb_state' value. Possible `arb_state' values are
`ARBIT_NULL', `ARBIT_INIT', `ARBIT_FIND', `ARBIT_PREP1', `ARBIT_PREP2',
`ARBIT_START', `ARBIT_RUN', `ARBIT_CHOOSE', `ARBIT_CRASH', and
`UNKNOWN'.

`arb_connected' shows whether the current node is connected to the
`arbitrator'.

Like the *Note `membership': mysql-cluster-ndbinfo-membership. and
*Note `arbitrator_validity_summary':
mysql-cluster-ndbinfo-arbitrator-validity-summary.  tables, this table
was added in MySQL Cluster NDB 7.2.10.


File: manual.info,  Node: mysql-cluster-ndbinfo-arbitrator-validity-summary,  Next: mysql-cluster-ndbinfo-blocks,  Prev: mysql-cluster-ndbinfo-arbitrator-validity-detail,  Up: mysql-cluster-ndbinfo

17.5.10.2 The `ndbinfo arbitrator_validity_summary' Table
.........................................................

The `arbitrator_validity_summary' table provides a composite view of
the arbitrator with regard to the cluster's data nodes.

The following table provides information about the columns in the
`arbitrator_validity_summary' table. For each column, the table shows
the name, data type, and a brief description. Additional information
can be found in the notes following the table.

This table describes the columns in the `arbitrator_validity_summary'
table. The table shows the column name, data type, and provides a brief
description.

Column Name            Type               Description
`arbitrator'           integer            Node ID of arbitrator
`arb_ticket'           string             Internal identifier used to
                                          track arbitration
`arb_connected'        `Yes' or `No'      Whether this arbitrator is
                                          connected to the cluster
`consensus_count'      integer            Number of data nodes that see
                                          this node as arbitrator

In normal operations, this table should have only 1 row for any
appreciable length of time. If it has more than 1 row for longer than a
few moments, then either not all nodes are connected to the arbitrator,
or all nodes are connected, but do not agree on the same arbitrator.

The `arbitrator' column shows the arbitrator's node ID.

`arb_ticket' is the internal identifier used by this arbitrator.

`arb_connected' shows whether this node is connected to the cluster as
an arbitrator.

Like the *Note `membership': mysql-cluster-ndbinfo-membership. and
*Note `arbitrator_validity_detail':
mysql-cluster-ndbinfo-arbitrator-validity-detail.  tables, this table
was added in MySQL Cluster NDB 7.2.10.


File: manual.info,  Node: mysql-cluster-ndbinfo-blocks,  Next: mysql-cluster-ndbinfo-cluster-operations,  Prev: mysql-cluster-ndbinfo-arbitrator-validity-summary,  Up: mysql-cluster-ndbinfo

17.5.10.3 The `ndbinfo blocks' Table
....................................

The `blocks' table is a static table which simply contains the names
and internal IDs of all NDB kernel blocks (see `NDB' Kernel Blocks
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals-kernel-blocks.html)).
It is for use by the other *Note `ndbinfo': mysql-cluster-ndbinfo.
tables (most of which are actually views) in mapping block numbers to
block names for producing human-readable output.

The following table provides information about the columns in the
`blocks' table. For each column, the table shows the name, data type,
and a brief description. Additional information can be found in the
notes following the table.

This table provides information about the columns in the `blocks'
table. The table shows the column name, data type, and provides a brief
description.

Column Name            Type               Description
`block_number'         integer            Block number
`block_name'           string             Block name

To obtain a list of all block names, simply execute `SELECT block_name
FROM ndbinfo.blocks'.  Although this is a static table, its content can
vary between different MySQL Cluster releases.


File: manual.info,  Node: mysql-cluster-ndbinfo-cluster-operations,  Next: mysql-cluster-ndbinfo-cluster-transactions,  Prev: mysql-cluster-ndbinfo-blocks,  Up: mysql-cluster-ndbinfo

17.5.10.4 The `ndbinfo cluster_operations' Table
................................................

The `cluster_operations' table provides a per-operation (stateful
primary key op) view of all activity in the MySQL Cluster from the
point of view of the local data management (LQH) blocks (see The
`DBLQH' Block
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals-kernel-blocks-dblqh.html)).

The following table provides information about the columns in the
`cluster_operations' table. For each column, the table shows the name,
data type, and a brief description. Additional information can be found
in the notes following the table.

This table provides information about the columns in the
`cluster_operations' table. The table shows the column name, data type,
and provides a brief description.

Column Name            Type               Description
`node_id'              integer            Node ID of reporting LQH block
`block_instance'       integer            LQH block instance
`transid'              integer            Transaction ID
`operation_type'       string             Operation type (see text for
                                          possible values)
`state'                string             Operation state (see text for
                                          possible values)
`tableid'              integer            Table ID
`fragmentid'           integer            Fragment ID
`client_node_id'       integer            Client node ID
`client_block_ref'     integer            Client block reference
`tc_node_id'           integer            Transaction coordinator node ID
`tc_block_no'          integer            Transaction coordinator block
                                          number
`tc_block_instance'    integer            Transaction coordinator block
                                          instance

The transaction ID is a unique 64-bit number which can be obtained
using the NDB API's `getTransactionId()'
(http://dev.mysql.com/doc/ndbapi/en/ndb-ndbtransaction-methods.html#ndb-ndbtransaction-gettransactionid)
method. (Currently, the MySQL Server does not expose the NDB API
transaction ID of an ongoing transaction.)

The `operation_type' column can take any one of the values `READ',
`READ-SH', `READ-EX', `INSERT', `UPDATE', `DELETE', `WRITE', `UNLOCK',
`REFRESH', `SCAN', `SCAN-SH', `SCAN-EX', or `<unknown>'.

The `state' column can have any one of the values `ABORT_QUEUED',
`ABORT_STOPPED', `COMMITTED', `COMMIT_QUEUED', `COMMIT_STOPPED',
`COPY_CLOSE_STOPPED', `COPY_FIRST_STOPPED', `COPY_STOPPED',
`COPY_TUPKEY', `IDLE', `LOG_ABORT_QUEUED', `LOG_COMMIT_QUEUED',
`LOG_COMMIT_QUEUED_WAIT_SIGNAL', `LOG_COMMIT_WRITTEN',
`LOG_COMMIT_WRITTEN_WAIT_SIGNAL', `LOG_QUEUED', `PREPARED',
`PREPARED_RECEIVED_COMMIT', `SCAN_CHECK_STOPPED', `SCAN_CLOSE_STOPPED',
`SCAN_FIRST_STOPPED', `SCAN_RELEASE_STOPPED', `SCAN_STATE_USED',
`SCAN_STOPPED', `SCAN_TUPKEY', `STOPPED', `TC_NOT_CONNECTED',
`WAIT_ACC', `WAIT_ACC_ABORT', `WAIT_AI_AFTER_ABORT', `WAIT_ATTR',
`WAIT_SCAN_AI', `WAIT_TUP', `WAIT_TUPKEYINFO', `WAIT_TUP_COMMIT', or
`WAIT_TUP_TO_ABORT'. (If the MySQL Server is running with
`ndbinfo_show_hidden' enabled, you can view this list of states by
selecting from the `ndb$dblqh_tcconnect_state' table, which is normally
hidden.)

You can obtain the name of an `NDB' table from its table ID by checking
the output of *Note `ndb_show_tables':
mysql-cluster-programs-ndb-show-tables.

The `fragid' is the same as the partition number seen in the output of
*Note `ndb_desc': mysql-cluster-programs-ndb-desc.
`--extra-partition-info' (short form `-p').

In `client_node_id' and `client_block_ref', `client' refers to a MySQL
Cluster API or SQL node (that is, an NDB API client or a MySQL Server
attached to the cluster).

This table was added in MySQL Cluster NDB 7.2.2.


File: manual.info,  Node: mysql-cluster-ndbinfo-cluster-transactions,  Next: mysql-cluster-ndbinfo-config-params,  Prev: mysql-cluster-ndbinfo-cluster-operations,  Up: mysql-cluster-ndbinfo

17.5.10.5 The `ndbinfo cluster_transactions' Table
..................................................

The `cluster_transactions' table shows information about all ongoing
transactions in a MySQL Cluster.

The following table provides information about the columns in the
`cluster_transactions' table. For each column, the table shows the
name, data type, and a brief description. Additional information can be
found in the notes following the table.

This table provides information about the columns in the
`cluster_transactions' table. The table shows the column name, data
type, and provides a brief description.

Column Name            Type               Description
`node_id'              integer            Node ID of transaction
                                          coordinator
`block_instance'       integer            TC block instance
`transid'              integer            Transaction ID
`state'                string             Operation state (see text for
                                          possible values)
`count_operations'     integer            Number of stateful primary key
                                          operations in transaction
                                          (includes reads with locks, as
                                          well as DML operations)
`outstanding_operations'integer            Operations still being executed
                                          in local data management blocks
`inactive_seconds'     integer            Time spent waiting for API
`client_node_id'       integer            Client node ID
`client_block_ref'     integer            Client block reference

The transaction ID is a unique 64-bit number which can be obtained
using the NDB API's `getTransactionId()'
(http://dev.mysql.com/doc/ndbapi/en/ndb-ndbtransaction-methods.html#ndb-ndbtransaction-gettransactionid)
method. (Currently, the MySQL Server does not expose the NDB API
transaction ID of an ongoing transaction.)

The `state' column can have any one of the values `CS_ABORTING',
`CS_COMMITTING', `CS_COMMIT_SENT', `CS_COMPLETE_SENT', `CS_COMPLETING',
`CS_CONNECTED', `CS_DISCONNECTED', `CS_FAIL_ABORTED',
`CS_FAIL_ABORTING', `CS_FAIL_COMMITTED', `CS_FAIL_COMMITTING',
`CS_FAIL_COMPLETED', `CS_FAIL_PREPARED', `CS_PREPARE_TO_COMMIT',
`CS_RECEIVING', `CS_REC_COMMITTING', `CS_RESTART',
`CS_SEND_FIRE_TRIG_REQ', `CS_STARTED', `CS_START_COMMITTING',
`CS_START_SCAN', `CS_WAIT_ABORT_CONF', `CS_WAIT_COMMIT_CONF',
`CS_WAIT_COMPLETE_CONF', `CS_WAIT_FIRE_TRIG_REQ'. (If the MySQL Server
is running with `ndbinfo_show_hidden' enabled, you can view this list
of states by selecting from the `ndb$dbtc_apiconnect_state' table,
which is normally hidden.)

In `client_node_id' and `client_block_ref', `client' refers to a MySQL
Cluster API or SQL node (that is, an NDB API client or a MySQL Server
attached to the cluster).

This table was added in MySQL Cluster NDB 7.2.2.


File: manual.info,  Node: mysql-cluster-ndbinfo-config-params,  Next: mysql-cluster-ndbinfo-counters,  Prev: mysql-cluster-ndbinfo-cluster-transactions,  Up: mysql-cluster-ndbinfo

17.5.10.6 The `ndbinfo config_params' Table
...........................................

The `config_params' table is a static table which provides the names
and internal ID numbers of all MySQL Cluster configuration parameters.

The following table provides information about the columns in the
`config_params' table. For each column, the table shows the name, data
type, and a brief description.  Additional information can be found in
the notes following the table.

This table provides information about the columns in the
`config_params' table. The table shows the column name, data type, and
provides a brief description.

Column Name            Type               Description
`param_number'         integer            The parameter's internal ID
                                          number
`param_name'           string             The name of the parameter

Although this is a static table, its content can vary between MySQL
Cluster installations, since supported parameters can vary due to
differences between software releases, cluster hardware configurations,
and other factors.


File: manual.info,  Node: mysql-cluster-ndbinfo-counters,  Next: mysql-cluster-ndbinfo-diskpagebuffer,  Prev: mysql-cluster-ndbinfo-config-params,  Up: mysql-cluster-ndbinfo

17.5.10.7 The `ndbinfo counters' Table
......................................

The `counters' table provides running totals of events such as reads
and writes for specific kernel blocks and data nodes. Counts are kept
from the most recent node start or restart; a node start or restart
resets all counters on that node. Not all kernel blocks have all types
of counters.

The following table provides information about the columns in the
`counters' table. For each column, the table shows the name, data type,
and a brief description.  Additional information can be found in the
notes following the table.

This table provides information about the columns in the `counters'
table. The table shows the column name, data type, and provides a brief
description.

Column Name            Type               Description
`node_id'              integer            The data node ID
`block_name'           string             Name of the associated NDB
                                          kernel block (see `NDB' Kernel
                                          Blocks
                                          (http://dev.mysql.com/doc/ndbapi/en/ndb-internals-kernel-blocks.html)).
`block_instance'       integer            Block instance
`counter_id'           integer            The counter's internal ID
                                          number; normally an integer
                                          between 1 and 10, inclusive.
`counter_name'         string             The name of the counter. See
                                          text for names of individual
                                          counters and the NDB kernel
                                          block with which each counter is
                                          associated.
`val'                  integer            The counter's value

Each counter is associated with a particular NDB kernel block.  Prior
to MySQL Cluster NDB 7.2.0, this was limited to either the `DBLQH'
kernel block or the `DBTC' kernel block.

The `OPERATIONS' counter is associated with the `DBLQH' (local query
handler) kernel block (see The `DBLQH' Block
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals-kernel-blocks-dblqh.html)).

The `ATTRINFO', `TRANSACTIONS', `COMMITS', `READS', `SIMPLE_READS',
`WRITES', `ABORTS', `TABLE_SCANS', and `RANGE_SCANS' counters are
associated with the DBTC (transaction co-ordinator) kernel block (see
The `DBTC' Block
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals-kernel-blocks-dbtc.html)).

MySQL Cluster NDB 7.2.0, as part of its implementation of distributed
pushed-down joins, adds the `LOCAL_TABLE_SCANS_SENT', `READS_RECEIVED',
`PRUNED_RANGE_SCANS_RECEIVED', `RANGE_SCANS_RECEIVED',
`LOCAL_READS_SENT', `CONST_PRUNED_RANGE_SCANS_RECEIVED',
`LOCAL_RANGE_SCANS_SENT', `REMOTE_READS_SENT',
`REMOTE_RANGE_SCANS_SENT', `READS_NOT_FOUND', `SCAN_BATCHES_RETURNED',
`TABLE_SCANS_RECEIVED', and `SCAN_ROWS_RETURNED' counters. These
counters are associated with the `DBSPJ' (select push-down join) kernel
block (see The `DBSPJ' Block
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals-kernel-blocks-dbspj.html)).

A number of counters increasing the visibility of transporter overload
and send buffer sizing when troubleshooting such issues were added in
MySQL Cluster NDB 7.2.10. (Bug #15935206) For each LQH instance, there
is one instance of each counter in the following list:

   * `LQHKEY_OVERLOAD': Number of primary key requests rejected at the
     LQH block instance due to transporter overload

   * `LQHKEY_OVERLOAD_TC': Count of instances of `LQHKEY_OVERLOAD'
     where the TC node transporter was overloaded

   * `LQHKEY_OVERLOAD_READER': Count of instances of `LQHKEY_OVERLOAD'
     where the API reader (reads only) node was overloaded.

   * `LQHKEY_OVERLOAD_NODE_PEER': Count of instances of
     `LQHKEY_OVERLOAD' where the next backup data node (writes only)
     was overloaded

   * `LQHKEY_OVERLOAD_SUBSCRIBER': Count of instances of
     `LQHKEY_OVERLOAD' where a event subscriber (writes only) was
     overloaded.

   * `LQHSCAN_SLOWDOWNS': Count of instances where a fragment scan
     batch size was reduced due to scanning API transporter overload.


File: manual.info,  Node: mysql-cluster-ndbinfo-diskpagebuffer,  Next: mysql-cluster-ndbinfo-logbuffers,  Prev: mysql-cluster-ndbinfo-counters,  Up: mysql-cluster-ndbinfo

17.5.10.8 The `ndbinfo diskpagebuffer' Table
............................................

The `diskpagebuffer' table provides statistics about disk page buffer
usage by MySQL Cluster Disk Data tables.

The following table provides information about the columns in the
`diskpagebuffer' table. For each column, the table shows the name, data
type, and a brief description.  Additional information can be found in
the notes following the table.

This table provides information about the columns in the
`diskpagebuffer' table. The table shows the column names, data type,
and provides a brief description.

Column Name                   Type           Description
`node_id'                     integer        The data node ID
`block_instance'              integer        Block instance
`pages_written'               integer        Number of pages written to
                                             disk.
`pages_written_lcp'           integer        Number of pages written by
                                             local checkpoints.
`pages_read'                  integer        Number of pages read from
                                             disk
`log_waits'                   integer        Number of page writes
                                             waiting for log to be
                                             written to disk
`page_requests_direct_return' integer        Number of requests for pages
                                             that were available in buffer
`page_requests_wait_queue'    integer        Number of requests that had
                                             to wait for pages to become
                                             available in buffer
`page_requests_wait_io'       integer        Number of requests that had
                                             to be read from pages on
                                             disk (pages were unavailable
                                             in buffer)

You can use this table with MySQL Cluster Disk Data tables to determine
whether `DiskPageBufferMemory' is sufficiently large to allow data to
be read from the buffer rather from disk; minimizing disk seeks can
help improve performance of such tables.

You can determine the proportion of reads from `DiskPageBufferMemory' to
the total number of reads using a query such as this one, which obtains
this ratio as a percentage:

     SELECT
       node_id,
       100 * page_requests_direct_return /
         (page_requests_direct_return + page_requests_wait_io)
           AS hit_ratio
     FROM ndbinfo.diskpagebuffer;

The result from this query should be similar to what is shown here,
with one row for each data node in the cluster (in this example, the
cluster has 4 data nodes):

     +---------+-----------+
     | node_id | hit_ratio |
     +---------+-----------+
     |       5 |   97.6744 |
     |       6 |   97.6879 |
     |       7 |   98.1776 |
     |       8 |   98.1343 |
     +---------+-----------+
     4 rows in set (0.00 sec)

`hit_ratio' values approaching 100% indicate that only a very small
number of reads are being made from disk rather than from the buffer,
which means that Disk Data read performance is approaching an optimum
level. If any of these values are less than 95%, this is a strong
indicator that the setting for `DiskPageBufferMemory' needs to be
increased in the `config.ini' file.

*Note*:

A change in `DiskPageBufferMemory' requires a rolling restart of all of
the cluster's data nodes before it takes effect.


File: manual.info,  Node: mysql-cluster-ndbinfo-logbuffers,  Next: mysql-cluster-ndbinfo-logspaces,  Prev: mysql-cluster-ndbinfo-diskpagebuffer,  Up: mysql-cluster-ndbinfo

17.5.10.9 The `ndbinfo logbuffers' Table
........................................

The `logbuffer' table provides information on MySQL Cluster log buffer
usage.

The following table provides information about the columns in the
`logbuffers' table. For each column, the table shows the name, data
type, and a brief description.

This table provides information about the columns in the `logbuffers'
table. The table shows the column names, data type, and provides a brief
description.

Column Name            Type               Description
`node_id'              integer            The ID of this data node.
`log_type'             string             Type of log; one of: `REDO' or
                                          `DD-UNDO'.
`log_id'               integer            The log ID.
`log_part'             integer            The log part number.
`total'                integer            Total space available for this
                                          log.
`used'                 integer            Space used by this log.


File: manual.info,  Node: mysql-cluster-ndbinfo-logspaces,  Next: mysql-cluster-ndbinfo-membership,  Prev: mysql-cluster-ndbinfo-logbuffers,  Up: mysql-cluster-ndbinfo

17.5.10.10 The `ndbinfo logspaces' Table
........................................

This table provides information about MySQL Cluster log space usage.

The following table provides information about the columns in the
`logspaces' table. For each column, the table shows the name, data
type, and a brief description.

This table provides information about the columns in the `logspaces'
table. The table shows the column name, data type, and provides a brief
description.

Column Name            Type               Description
`node_id'              integer            The ID of this data node.
`log_type'             string             Type of log; one of: `REDO' or
                                          `DD-UNDO'.
`log_id'               integer            The log ID.
`log_part'             integer            The log part number.
`total'                integer            Total space available for this
                                          log.
`used'                 integer            Space used by this log.


File: manual.info,  Node: mysql-cluster-ndbinfo-membership,  Next: mysql-cluster-ndbinfo-memoryusage,  Prev: mysql-cluster-ndbinfo-logspaces,  Up: mysql-cluster-ndbinfo

17.5.10.11 The `ndbinfo membership' Table
.........................................

The `membership' table describes the view that each data node has of
all the others in the cluster, including node group membership,
president node, arbitrator, arbitrator successor, arbitrator connection
states, and other information.

The following table provides information about the columns in the
`membership' table. For each column, the table shows the name, data
type, and a brief description.  Additional information can be found in
the notes following the table.

This table provides information about the columns in the `membership'
table. The table shows the name, data type, and provides a brief
description.

Column Name            Type               Description
`node_id'              integer            This node's node ID
`group_id'             integer            Node group to which this node
                                          belongs
`left node'            integer            Node ID of the previous node
`right_node'           integer            Node ID of the next node
`president'            integer            President's node ID
`successor'            integer            Node ID of successor to
                                          president
`succession_order'     integer            Order in which this node
                                          succeeds to presidency
`Conf_HB_order'        integer            -
`arbitrator'           integer            Node ID of arbitrator
`arb_ticket'           string             Internal identifier used to
                                          track arbitration
`arb_state'            Enumeration (see   Arbitration state
                       text)              
`arb_connected'        `Yes' or `No'      Whether this node is connected
                                          to the arbitrator
`connected_rank1_arbs' List of node IDs   Connected arbitrators of rank 1
`connected_rank2_arbs' List of node IDs   Connected arbitrators of rank 1

The node ID and node group ID are the same as reported by *Note
`ndb_mgm -e "SHOW"': mysql-cluster-programs-ndb-mgm.

`left_node' and `right_node' are defined in terms of a model that
connects all data nodes in a circle, in order of their node IDs,
similar to the ordering of the numbers on a clock dial, as shown here:

Arrangement of nodes in a circle

In this example, we have 8 data nodes, numbered 5, 6, 7, 8, 12, 13, 14,
and 15, ordered clockwise in a circle. We determine `left' and `right'
from the interior of the circle. The node to the left of node 5 is node
15, and the node to the right of node 5 is node 6. You can see all these
relationships by running the following query and observing the output:

     mysql> SELECT node_id,left_node,right_node
         -> FROM ndbinfo.membership;
     +---------+-----------+------------+
     | node_id | left_node | right_node |
     +---------+-----------+------------+
     |       5 |        15 |          6 |
     |       6 |         5 |          7 |
     |       7 |         6 |          8 |
     |       8 |         7 |         12 |
     |      12 |         8 |         13 |
     |      13 |        12 |         14 |
     |      14 |        13 |         15 |
     |      15 |        14 |          5 |
     +---------+-----------+------------+
     8 rows in set (0.00 sec)

The designations `left' and `right' are used in the event log in the
same way.

The `president' node is the node viewed by the current node as
responsible for setting an arbitrator (see MySQL Cluster Start Phases
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals-start-phases.html)).
If the president fails or becomes disconnected, the current node
expects the node whose ID is shown in the `successor' column to become
the new president. The `succession_order' column shows the place in the
succession queue that the current node views itself as having.

In a normal MySQL Cluster, all data nodes should see the same node as
`president', and the same node (other than the president) as its
`successor'. In addition, the current president should see itself as
`1' in the order of succession, the `successor' node should see itself
as `2', and so on.

All nodes should show the same `arb_ticket' values as well as the same
`arb_state' values.  Possible `arb_state' values are `ARBIT_NULL',
`ARBIT_INIT', `ARBIT_FIND', `ARBIT_PREP1', `ARBIT_PREP2', `ARBIT_START',
`ARBIT_RUN', `ARBIT_CHOOSE', `ARBIT_CRASH', and `UNKNOWN'.

`arb_connected' shows whether this node is connected to the node shown
as this node's `arbitrator'.

The `connected_rank1_arbs' and `connected_rank2_arbs' columns each
display a list of 0 or more arbitrators having an `ArbitrationRank'
equal to 1, or to 2, respectively.

*Note*:

Both management nodes and API nodes are eligible to become arbitrators.

Like the *Note `arbitrator_validity_detail':
mysql-cluster-ndbinfo-arbitrator-validity-detail. and *Note
`arbitrator_validity_summary':
mysql-cluster-ndbinfo-arbitrator-validity-summary.  tables, this table
was added in MySQL Cluster NDB 7.2.10.


File: manual.info,  Node: mysql-cluster-ndbinfo-memoryusage,  Next: mysql-cluster-ndbinfo-nodes,  Prev: mysql-cluster-ndbinfo-membership,  Up: mysql-cluster-ndbinfo

17.5.10.12 The `ndbinfo memoryusage' Table
..........................................

Querying this table provides information similar to that provided by
the `ALL REPORT MemoryUsage' command in the *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm. client, or logged by `ALL DUMP 1000'.

The following table provides information about the columns in the
`memoryusage' table. For each column, the table shows the name, data
type, and a brief description.  Additional information can be found in
the notes following the table.

This table provides information about the columns in the `memoryusage'
table in MySQL Cluster NDB 7.1.3 and later. The table shows the column
name, data type, and provides a brief description.

Column Name            Type               Description
`node_id'              integer            The node ID of this data node.
`memory_type'          string             One of `Data memory' or `Index
                                          memory'.
`used'                 integer            Number of bytes currently used
                                          for data memory or index memory
                                          by this data node.
`used_pages'           integer            Number of pages currently used
                                          for data memory or index memory
                                          by this data node; see text.
`total'                integer            Total number of bytes of data
                                          memory or index memory
                                          available for this data node;
                                          see text.
`total_pages'          integer            Total number of memory pages
                                          available for data memory or
                                          index memory on this data node;
                                          see text.

The `total' column represents the total amount of memory in bytes
available for the given resource (data memory or index memory) on a
particular data node. This number should be approximately equal to the
setting of the corresponding configuration parameter in the `config.ini'
file.

Suppose that the cluster has 2 data nodes having node IDs `1' and `2',
and the `config.ini' file contains the following:

     [ndbd default]
     DataMemory = 100M
     IndexMemory = 100M

The following query shows approximately the same values:

     mysql> SELECT node_id, memory_type, total
          > FROM ndbinfo.memoryusage;
     +---------+--------------+-----------+
     | node_id | memory_type  | total     |
     +---------+--------------+-----------+
     |       1 | Data memory  | 104857600 |
     |       1 | Index memory | 105119744 |
     |       2 | Data memory  | 104857600 |
     |       2 | Index memory | 105119744 |
     +---------+--------------+-----------+
     4 rows in set (0.30 sec)

In this case, the `total' column values for index memory are slightly
higher than the value set of `IndexMemory' due to internal rounding.

For the `used_pages' and `total_pages' columns, resources are measured
in pages, which are 32K in size for `DataMemory' and 8K for
`IndexMemory'.


File: manual.info,  Node: mysql-cluster-ndbinfo-nodes,  Next: mysql-cluster-ndbinfo-resources,  Prev: mysql-cluster-ndbinfo-memoryusage,  Up: mysql-cluster-ndbinfo

17.5.10.13 The `ndbinfo nodes' Table
....................................

This table contains information on the status of data nodes. For each
data node that is running in the cluster, a corresponding row in this
table provides the node's node ID, status, and uptime. For nodes that
are starting, it also shows the current start phase.

The following table provides information about the columns in the
`nodes' table. For each column, the table shows the name, data type,
and a brief description. Additional information can be found in the
notes following the table.

This table provides information about the columns of the `nodes' table.
The table shows the column name, data type, and provides a brief
description.

Column Name            Type               Description
`node_id'              integer            The data node's unique node ID
                                          in the cluster.
`uptime'               integer            Time since the node was last
                                          started, in seconds.
`status'               string             Current status of the data
                                          node; see text for possible
                                          values.
`start_phase'          integer            If the data node is starting,
                                          the current start phase.
`config_generation'    integer            The version of the cluster
                                          configuration file in use on
                                          this data node.

The `uptime' column shows the time in seconds that this node has been
running since it was last started or restarted. This is a *Note
`BIGINT': integer-types.  value. This figure includes the time actually
needed to start the node; in other words, this counter starts running
the moment that *Note `ndbd': mysql-cluster-programs-ndbd. or *Note
`ndbmtd': mysql-cluster-programs-ndbmtd. is first invoked; thus, even
for a node that has not yet finished starting, `uptime' may show a
non-zero value.

The `status' column shows the node's current status. This is one of:
`NOTHING', `CMVMI', `STARTING', `STARTED', `SINGLEUSER', `STOPPING_1',
`STOPPING_2', `STOPPING_3', or `STOPPING_4'.  When the status is
`STARTING', you can see the current start phase in the `start_phase'
column (see later in this section). `SINGLEUSER' is displayed in the
`status' column for all data nodes when the cluster is in single user
mode (see *Note mysql-cluster-single-user-mode::). Seeing one of the
`STOPPING' states does not necessarily mean that the node is shutting
down but can mean rather that it is entering a new state; for example,
if you put the cluster in single user mode, you can sometimes see data
nodes report their state briefly as `STOPPING_2' before the status
changes to `SINGLEUSER'.

The `start_phase' column uses the same range of values as those used in
the output of the *Note `ndb_mgm': mysql-cluster-programs-ndb-mgm.
client `NODE_ID STATUS' command (see *Note
mysql-cluster-mgm-client-commands::). If the node is not currently
starting, then this column shows `0'. For a listing of MySQL Cluster
start phases with descriptions, see *Note mysql-cluster-start-phases::.

The `config_generation' column shows which version of the cluster
configuration is in effect on each data node. This can be useful when
performing a rolling restart of the cluster in order to make changes in
configuration parameters. For example, from the output of the following
*Note `SELECT': select. statement, you can see that node 3 is not yet
using the latest version of the cluster configuration (`6') although
nodes 1, 2, and 4 are doing so:

     mysql> USE ndbinfo;
     Database changed
     mysql> SELECT * FROM nodes;
     +---------+--------+---------+-------------+-------------------+
     | node_id | uptime | status  | start_phase | config_generation |
     +---------+--------+---------+-------------+-------------------+
     |       1 |  10462 | STARTED |           0 |                 6 |
     |       2 |  10460 | STARTED |           0 |                 6 |
     |       3 |  10457 | STARTED |           0 |                 5 |
     |       4 |  10455 | STARTED |           0 |                 6 |
     +---------+--------+---------+-------------+-------------------+
     2 rows in set (0.04 sec)

Therefore, for the case just shown, you should restart node 3 to
complete the rolling restart of the cluster.

Nodes that are stopped are not accounted for in this table.  Suppose
that you have a MySQL Cluster with 4 data nodes (node IDs 1, 2, 3 and
4), and all nodes are running normally, then this table contains 4
rows, 1 for each data node:

     mysql> USE ndbinfo;
     Database changed
     mysql> SELECT * FROM nodes;
     +---------+--------+---------+-------------+-------------------+
     | node_id | uptime | status  | start_phase | config_generation |
     +---------+--------+---------+-------------+-------------------+
     |       1 |  11776 | STARTED |           0 |                 6 |
     |       2 |  11774 | STARTED |           0 |                 6 |
     |       3 |  11771 | STARTED |           0 |                 6 |
     |       4 |  11769 | STARTED |           0 |                 6 |
     +---------+--------+---------+-------------+-------------------+
     4 rows in set (0.04 sec)

If you shut down one of the nodes, only the nodes that are still
running are represented in the output of this *Note `SELECT': select.
statement, as shown here:

     ndb_mgm> 2 STOP
     Node 2: Node shutdown initiated
     Node 2: Node shutdown completed.
     Node 2 has shutdown.

     mysql> SELECT * FROM nodes;
     +---------+--------+---------+-------------+-------------------+
     | node_id | uptime | status  | start_phase | config_generation |
     +---------+--------+---------+-------------+-------------------+
     |       1 |  11807 | STARTED |           0 |                 6 |
     |       3 |  11802 | STARTED |           0 |                 6 |
     |       4 |  11800 | STARTED |           0 |                 6 |
     +---------+--------+---------+-------------+-------------------+
     3 rows in set (0.02 sec)


File: manual.info,  Node: mysql-cluster-ndbinfo-resources,  Next: mysql-cluster-ndbinfo-server-operations,  Prev: mysql-cluster-ndbinfo-nodes,  Up: mysql-cluster-ndbinfo

17.5.10.14 The `ndbinfo resources' Table
........................................

This table provides information about data node resource availability
and usage.

These resources are sometimes known as _super-pools_.

The following table provides information about the columns in the
`resources' table. For each column, the table shows the name, data
type, and a brief description.  Additional information can be found in
the notes following the table.

This table provides information about the columns in the `resources'
table. The table shows the column name, data type, and provides a brief
description.

Column Name            Type               Description
`node_id'              integer            The unique node ID of this data
                                          node.
`resource_name'        string             Name of the resource; see text.
`reserved'             integer            The amount reserved for this
                                          resource.
`used'                 integer            The amount actually used by
                                          this resource.
`max'                  integer            The maximum amount of this
                                          resource used, since the node
                                          was last started.

The `resource_name' can be one of `RESERVED', `DISK_OPERATIONS',
`DISK_RECORDS', `DATA_MEMORY', `JOBBUFFER', `FILE_BUFFERS', or
`TRANSPORTER_BUFFERS'.


File: manual.info,  Node: mysql-cluster-ndbinfo-server-operations,  Next: mysql-cluster-ndbinfo-server-transactions,  Prev: mysql-cluster-ndbinfo-resources,  Up: mysql-cluster-ndbinfo

17.5.10.15 The `ndbinfo server_operations' Table
................................................

The `server_operations' table contains entries for all ongoing *Note
`NDB': mysql-cluster. operations that the current SQL node (MySQL
Server) is currently involved in. It effectively is a subset of the the
*Note `cluster_operations': mysql-cluster-ndbinfo-cluster-operations.
table, in which operations for other SQL and API nodes are not shown.

The following table provides information about the columns in the
`server_operations' table. For each column, the table shows the name,
data type, and a brief description.  Additional information can be
found in the notes following the table.

This table provides information about the columns in the
`server_operations' table. The table shows the column name, data type,
and provides a brief description.

Column Name            Type               Description
`mysql_connection_id'  integer            MySQL Server connection ID
`node_id'              integer            Node ID
`block_instance'       integer            Block instance
`transid'              integer            Transaction ID
`operation_type'       string             Operation type (see text for
                                          possible values)
`state'                string             Operation state (see text for
                                          possible values)
`tableid'              integer            Table ID
`fragmentid'           integer            Fragment ID
`client_node_id'       integer            Client node ID
`client_block_ref'     integer            Client block reference
`tc_node_id'           integer            Transaction coordinator node ID
`tc_block_no'          integer            Transaction coordinator block
                                          number
`tc_block_instance'    integer            Transaction coordinator block
                                          instance

The `mysql_connection_id' is the same as the connection or session ID
shown in the output of *Note `SHOW PROCESSLIST': show-processlist. It
is obtained from the `INFORMATION_SCHEMA' table *Note
`NDB_TRANSID_MYSQL_CONNECTION_MAP':
ndb-transid-mysql-connection-map-table.

The transaction ID is a unique 64-bit number which can be obtained
using the NDB API's `getTransactionId()'
(http://dev.mysql.com/doc/ndbapi/en/ndb-ndbtransaction-methods.html#ndb-ndbtransaction-gettransactionid)
method. (Currently, the MySQL Server does not expose the NDB API
transaction ID of an ongoing transaction.)

The `operation_type' column can take any one of the values `READ',
`READ-SH', `READ-EX', `INSERT', `UPDATE', `DELETE', `WRITE', `UNLOCK',
`REFRESH', `SCAN', `SCAN-SH', `SCAN-EX', or `<unknown>'.

The `state' column can have any one of the values `ABORT_QUEUED',
`ABORT_STOPPED', `COMMITTED', `COMMIT_QUEUED', `COMMIT_STOPPED',
`COPY_CLOSE_STOPPED', `COPY_FIRST_STOPPED', `COPY_STOPPED',
`COPY_TUPKEY', `IDLE', `LOG_ABORT_QUEUED', `LOG_COMMIT_QUEUED',
`LOG_COMMIT_QUEUED_WAIT_SIGNAL', `LOG_COMMIT_WRITTEN',
`LOG_COMMIT_WRITTEN_WAIT_SIGNAL', `LOG_QUEUED', `PREPARED',
`PREPARED_RECEIVED_COMMIT', `SCAN_CHECK_STOPPED', `SCAN_CLOSE_STOPPED',
`SCAN_FIRST_STOPPED', `SCAN_RELEASE_STOPPED', `SCAN_STATE_USED',
`SCAN_STOPPED', `SCAN_TUPKEY', `STOPPED', `TC_NOT_CONNECTED',
`WAIT_ACC', `WAIT_ACC_ABORT', `WAIT_AI_AFTER_ABORT', `WAIT_ATTR',
`WAIT_SCAN_AI', `WAIT_TUP', `WAIT_TUPKEYINFO', `WAIT_TUP_COMMIT', or
`WAIT_TUP_TO_ABORT'. (If the MySQL Server is running with
`ndbinfo_show_hidden' enabled, you can view this list of states by
selecting from the `ndb$dblqh_tcconnect_state' table, which is normally
hidden.)

You can obtain the name of an `NDB' table from its table ID by checking
the output of *Note `ndb_show_tables':
mysql-cluster-programs-ndb-show-tables.

The `fragid' is the same as the partition number seen in the output of
*Note `ndb_desc': mysql-cluster-programs-ndb-desc.
`--extra-partition-info' (short form `-p').

In `client_node_id' and `client_block_ref', `client' refers to a MySQL
Cluster API or SQL node (that is, an NDB API client or a MySQL Server
attached to the cluster).

This table was added in MySQL Cluster NDB 7.2.2.


File: manual.info,  Node: mysql-cluster-ndbinfo-server-transactions,  Next: mysql-cluster-ndbinfo-threadblocks,  Prev: mysql-cluster-ndbinfo-server-operations,  Up: mysql-cluster-ndbinfo

17.5.10.16 The `ndbinfo server_transactions' Table
..................................................

The `server_transactions' table is subset of the *Note
`cluster_transactions': mysql-cluster-ndbinfo-cluster-transactions.
table, but includes only those transactions in which the current SQL
node (MySQL Server) is a participant, while including the relevant
connection IDs.

The following table provides information about the columns in the
`server_transactions' table. For each column, the table shows the name,
data type, and a brief description. Additional information can be found
in the notes following the table.

This table provides information about columns in the
`server_transactions' table. The table shows the column name, data
type, and provides a brief description.

Column Name            Type               Description
`mysql_connection_id'  integer            MySQL Server connection ID
`node_id'              integer            Transaction coordinator node ID
`block_instance'       integer            Transaction coordinator block
                                          instance
`transid'              integer            Transaction ID
`state'                string             Operation state (see text for
                                          possible values)
`count_operations'     integer            Number of stateful operations
                                          in the transaction
`outstanding_operations'integer            Operations still being executed
                                          by local data management layer
                                          (LQH blocks)
`inactive_seconds'     integer            Time spent waiting for API
`client_node_id'       integer            Client node ID
`client_block_ref'     integer            Client block reference

The `mysql_connection_id' is the same as the connection or session ID
shown in the output of *Note `SHOW PROCESSLIST': show-processlist. It
is obtained from the `INFORMATION_SCHEMA' table *Note
`NDB_TRANSID_MYSQL_CONNECTION_MAP':
ndb-transid-mysql-connection-map-table.

The transaction ID is a unique 64-bit number which can be obtained
using the NDB API's `getTransactionId()'
(http://dev.mysql.com/doc/ndbapi/en/ndb-ndbtransaction-methods.html#ndb-ndbtransaction-gettransactionid)
method. (Currently, the MySQL Server does not expose the NDB API
transaction ID of an ongoing transaction.)

The `state' column can have any one of the values `CS_ABORTING',
`CS_COMMITTING', `CS_COMMIT_SENT', `CS_COMPLETE_SENT', `CS_COMPLETING',
`CS_CONNECTED', `CS_DISCONNECTED', `CS_FAIL_ABORTED',
`CS_FAIL_ABORTING', `CS_FAIL_COMMITTED', `CS_FAIL_COMMITTING',
`CS_FAIL_COMPLETED', `CS_FAIL_PREPARED', `CS_PREPARE_TO_COMMIT',
`CS_RECEIVING', `CS_REC_COMMITTING', `CS_RESTART',
`CS_SEND_FIRE_TRIG_REQ', `CS_STARTED', `CS_START_COMMITTING',
`CS_START_SCAN', `CS_WAIT_ABORT_CONF', `CS_WAIT_COMMIT_CONF',
`CS_WAIT_COMPLETE_CONF', `CS_WAIT_FIRE_TRIG_REQ'. (If the MySQL Server
is running with `ndbinfo_show_hidden' enabled, you can view this list
of states by selecting from the `ndb$dbtc_apiconnect_state' table,
which is normally hidden.)

In `client_node_id' and `client_block_ref', `client' refers to a MySQL
Cluster API or SQL node (that is, an NDB API client or a MySQL Server
attached to the cluster).

This table was added in MySQL Cluster NDB 7.2.2.


File: manual.info,  Node: mysql-cluster-ndbinfo-threadblocks,  Next: mysql-cluster-ndbinfo-threadstat,  Prev: mysql-cluster-ndbinfo-server-transactions,  Up: mysql-cluster-ndbinfo

17.5.10.17 The `ndbinfo threadblocks' Table
...........................................

The `threadblocks' table associates data nodes, threads, and instances
of `NDB' kernel blocks.

The following table provides information about the columns in the
`threadblocks' table. For each column, the table shows the name, data
type, and a brief description.  Additional information can be found in
the notes following the table.

This table provides information about columns in the `threadblocks'
table. The table shows the column name, data type, and provides a brief
description.

Column Name            Type               Description
`node_id'              integer            Node ID
`thr_no'               integer            Thread ID
`block_name'           string             Block name
`block_instance'       integer            Block instance number

The `block_name' is one of the values found in the `block_name' column
when selecting from the *Note `ndbinfo.blocks':
mysql-cluster-ndbinfo-blocks. table. Although the list of possible
values is static for a given MySQL Cluster release, the list may vary
between releases.

This table was added in MySQL Cluster NDB 7.2.2.


File: manual.info,  Node: mysql-cluster-ndbinfo-threadstat,  Next: mysql-cluster-ndbinfo-transporters,  Prev: mysql-cluster-ndbinfo-threadblocks,  Up: mysql-cluster-ndbinfo

17.5.10.18 The `ndbinfo threadstat' Table
.........................................

The `threadstat' table provides a rough snapshot of statistics for
threads running in the `NDB' kernel.

The following table provides information about the columns in the
`threadstat' table. For each column, the table shows the name, data
type, and a brief description.  Additional information can be found in
the notes following the table.

This table provides information about the columns in the `threadstat'
table. The table shows the column names, data type, and provides a brief
description.

Column Name            Type               Description
`node_id'              integer            Node ID
`thr_no'               integer            Thread ID
`thr_nm'               string             Thread name
`c_loop'               string             Number of loops in main loop
`c_exec'               string             Number of signals executed
`c_wait'               string             Number of times waiting for
                                          additional input
`c_l_sent_prioa'       integer            Number of priority A signals
                                          sent to own node
`c_l_sent_priob'       integer            Number of priority B signals
                                          sent to own node
`c_r_sent_prioa'       integer            Number of priority A signals
                                          sent to remote node
`c_r_sent_priob'       integer            Number of priority B signals
                                          sent to remote node
`os_tid'               integer            OS thread ID
`os_now'               integer            OS time (ms)
`os_ru_utime'          integer            OS user CPU time (µs)
`os_ru_stime'          integer            OS system CPU time (µs)
`os_ru_minflt'         integer            OS page reclaims (soft page
                                          faults)
`os_ru_majflt'         integer            OS page faults (hard page
                                          faults)
`os_ru_nvcsw'          integer            OS voluntary context switches
`os_ru_nivcsw'         integer            OS involuntary context switches

`os_time' uses the system `gettimeofday()' call.

The values of the `os_ru_utime', `os_ru_stime', `os_ru_minflt',
`os_ru_majflt', `os_ru_nvcsw', and `os_ru_nivcsw' columns are obtained
using the system `getrusage()' call, or the equivalent.

Since this table contains counts taken at a given point in time, for
best results it is necessary to query this table periodically and store
the results in an intermediate table or tables. The MySQL Server's
Event Scheduler can be employed to automate such monitoring. For more
information, see *Note events::.

This table was added in MySQL Cluster NDB 7.2.2.


File: manual.info,  Node: mysql-cluster-ndbinfo-transporters,  Prev: mysql-cluster-ndbinfo-threadstat,  Up: mysql-cluster-ndbinfo

17.5.10.19 The `ndbinfo transporters' Table
...........................................

This table contains information about NDB transporters.

The following table provides information about the columns in the
`transporters' table. For each column, the table shows the name, data
type, and a brief description.  Additional information can be found in
the notes following the table.

This table provides information about the columns in the `transporters'
table. The table shows the column name, data type, and provides a brief
description.

Column Name            Type               Description
`node_id'              integer            This data node's unique node ID
                                          in the cluster.
`remote_node_id'       integer            The remote data node's node ID.
`status'               string             Status of the connection.
`remote_address'       string             Name or IP address of the
                                          remote host
`bytes_sent'           integer            Number of bytes sent using this
                                          connection
`bytes_received'                          Number of bytes received using
                                          this connection
`connect_count'                           Number of times connection
                                          established on this transporter
`overloaded'                              1 if this transporter is
                                          currently overloaded, otherwise
                                          0
`overload_count'                          Number of times this
                                          transporter has entered
                                          overload state since connecting
`slowdown'                                1 if this transporter is in
                                          scan slowdown state, otherwise 0
`slowdown_count'                          Number of times this
                                          transporter has entered scan
                                          slowdown state since connecting

For each running data node in the cluster, the `transporters' table
displays a row showing the status of each of that node's connections
with all nodes in the cluster, _including itself_. This information is
shown in the table's _status_ column, which can have any one of the
following values: `CONNECTING', `CONNECTED', `DISCONNECTING', or
`DISCONNECTED'.

Connections to API and management nodes which are configured but not
currently connected to the cluster are shown with status
`DISCONNECTED'. Rows where the `node_id' is that of a data nodes which
is not currently connected are not shown in this table. (This is
similar omission of disconnected nodes in the *Note `ndbinfo.nodes':
mysql-cluster-ndbinfo-nodes. table.

The `remote_address', `bytes_sent', and `bytes_received' columns were
added in MySQL Cluster NDB 7.2.9. The `remote_address' is the the host
name or address for the node whose ID is shown in the `remote_node_id'
column. The `bytes_sent' from this node and `bytes_received' by this
node are the numbers, respectively, of bytes sent and received by the
node using this connection since it was established; for nodes whose
status is `CONNECTING' or `DISCONNECTED', these columns always display
`0'.

The `connect_count', `overloaded', `overload_count' ,`slowdown', and
`slowdown_count' columns were added in MySQL Cluster NDB 7.2.10. These
counters are reset on connection, and retain their values after the
remote node disconnects. Also beginning with MySQL Cluster NDB 7.2.10,
the `bytes_send' and `bytes_received' counters are reset on connection
as well, and so retain their values following disconnection.
(Previously, the values in these columns were reset on disconnection.)
(Bug #15935206)

Assume you have a 5-node cluster consisting of 2 data nodes, 2 SQL
nodes, and 1 management node, as shown in the output of the `SHOW'
command in the *Note `ndb_mgm': mysql-cluster-programs-ndb-mgm. client:

     ndb_mgm> SHOW
     Connected to Management Server at: localhost:1186
     Cluster Configuration
     ---------------------
     [ndbd(NDB)]     2 node(s)
     id=1    @10.100.10.1  (5.5.33-ndb-7.2.14, Nodegroup: 0, Master)
     id=2    @10.100.10.2  (5.5.33-ndb-7.2.14, Nodegroup: 0)

     [ndb_mgmd(MGM)] 1 node(s)
     id=10   @10.100.10.10  (5.5.33-ndb-7.2.14)

     [mysqld(API)]   2 node(s)
     id=20   @10.100.10.20  (5.5.33-ndb-7.2.14)
     id=21   @10.100.10.21  (5.5.33-ndb-7.2.14)

There are 10 rows in the `transporters' table--5 for the first data
node, and 5 for the second--assuming that all data nodes are running,
as shown here:

     mysql> SELECT node_id, remote_node_id, status
         ->   FROM ndbinfo.transporters;
     +---------+----------------+---------------+
     | node_id | remote_node_id | status        |
     +---------+----------------+---------------+
     |       1 |              1 | DISCONNECTED  |
     |       1 |              2 | CONNECTED     |
     |       1 |             10 | CONNECTED     |
     |       1 |             20 | CONNECTED     |
     |       1 |             21 | CONNECTED     |
     |       2 |              1 | CONNECTED     |
     |       2 |              2 | DISCONNECTED  |
     |       2 |             10 | CONNECTED     |
     |       2 |             20 | CONNECTED     |
     |       2 |             21 | CONNECTED     |
     +---------+----------------+---------------+
     10 rows in set (0.04 sec)

If you shut down one of the data nodes in this cluster using the
command `2 STOP' in the *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm. client, then repeat the previous query
(again using the *Note `mysql': mysql. client), this table now shows
only 5 rows--1 row for each connection from the remaining management
node to another node, including both itself and the data node that is
currently offline--and displays `CONNECTING' for the status of each
remaining connection to the data node that is currently offline, as
shown here:

     mysql> SELECT node_id, remote_node_id, status
         ->   FROM ndbinfo.transporters;
     +---------+----------------+---------------+
     | node_id | remote_node_id | status        |
     +---------+----------------+---------------+
     |       1 |              1 | DISCONNECTED  |
     |       1 |              2 | CONNECTING    |
     |       1 |             10 | CONNECTED     |
     |       1 |             20 | CONNECTED     |
     |       1 |             21 | CONNECTED     |
     +---------+----------------+---------------+
     5 rows in set (0.02 sec)


File: manual.info,  Node: mysql-cluster-security,  Next: mysql-cluster-disk-data,  Prev: mysql-cluster-ndbinfo,  Up: mysql-cluster-management

17.5.11 MySQL Cluster Security Issues
-------------------------------------

* Menu:

* mysql-cluster-security-networking-issues::  MySQL Cluster Security and Networking Issues
* mysql-cluster-security-mysql-privileges::  MySQL Cluster and MySQL Privileges
* mysql-cluster-security-mysql-security-procedures::  MySQL Cluster and MySQL Security Procedures

This section discusses security considerations to take into account
when setting up and running MySQL Cluster.

Topics covered in this section include the following:

   * MySQL Cluster and network security issues

   * Configuration issues relating to running MySQL Cluster securely

   * MySQL Cluster and the MySQL privilege system

   * MySQL standard security procedures as applicable to MySQL Cluster


File: manual.info,  Node: mysql-cluster-security-networking-issues,  Next: mysql-cluster-security-mysql-privileges,  Prev: mysql-cluster-security,  Up: mysql-cluster-security

17.5.11.1 MySQL Cluster Security and Networking Issues
......................................................

In this section, we discuss basic network security issues as they
relate to MySQL Cluster. It is extremely important to remember that
MySQL Cluster `out of the box' is not secure; you or your network
administrator must take the proper steps to ensure that your cluster
cannot be compromised over the network.

Cluster communication protocols are inherently insecure, and no
encryption or similar security measures are used in communications
between nodes in the cluster. Because network speed and latency have a
direct impact on the cluster's efficiency, it is also not advisable to
employ SSL or other encryption to network connections between nodes, as
such schemes will effectively slow communications.

It is also true that no authentication is used for controlling API node
access to a MySQL Cluster. As with encryption, the overhead of imposing
authentication requirements would have an adverse impact on Cluster
performance.

In addition, there is no checking of the source IP address for either
of the following when accessing the cluster:

   * SQL or API nodes using `free slots' created by empty `[mysqld]' or
     `[api]' sections in the `config.ini' file

     This means that, if there are any empty `[mysqld]' or `[api]'
     sections in the `config.ini' file, then any API nodes (including
     SQL nodes) that know the management server's host name (or IP
     address) and port can connect to the cluster and access its data
     without restriction. (See *Note
     mysql-cluster-security-mysql-privileges::, for more information
     about this and related issues.)

     *Note*:

     You can exercise some control over SQL and API node access to the
     cluster by specifying a `HostName' parameter for all `[mysqld]' and
     `[api]' sections in the `config.ini' file. However, this also
     means that, should you wish to connect an API node to the cluster
     from a previously unused host, you need to add an `[api]' section
     containing its host name to the `config.ini' file.

     More information is available elsewhere in this chapter about the
     `HostName' parameter. Also see *Note mysql-cluster-quick::, for
     configuration examples using `HostName' with API nodes.

   * Any *Note `ndb_mgm': mysql-cluster-programs-ndb-mgm. client

     This means that any cluster management client that is given the
     management server's host name (or IP address) and port (if not the
     standard port) can connect to the cluster and execute any
     management client command. This includes commands such as `ALL
     STOP' and `SHUTDOWN'.

For these reasons, it is necessary to protect the cluster on the
network level. The safest network configuration for Cluster is one
which isolates connections between Cluster nodes from any other network
communications. This can be accomplished by any of the following
methods:

  1. Keeping Cluster nodes on a network that is physically separate
     from any public networks. This option is the most dependable;
     however, it is the most expensive to implement.

     We show an example of a MySQL Cluster setup using such a
     physically segregated network here:

     MySQL Cluster on a private network protected with a hardware
     firewall

     This setup has two networks, one private (solid box) for the
     Cluster management servers and data nodes, and one public (dotted
     box) where the SQL nodes reside. (We show the management and data
     nodes connected using a gigabit switch since this provides the
     best performance.) Both networks are protected from the outside by
     a hardware firewall, sometimes also known as a _network-based
     firewall_.

     This network setup is safest because no packets can reach the
     cluster's management or data nodes from outside the network--and
     none of the cluster's internal communications can reach the
     outside--without going through the SQL nodes, as long as the SQL
     nodes do not permit any packets to be forwarded. This means, of
     course, that all SQL nodes must be secured against hacking
     attempts.

     *Important*:

     With regard to potential security vulnerabilities, an SQL node is
     no different from any other MySQL server. See *Note
     security-against-attack::, for a description of techniques you can
     use to secure MySQL servers.

  2. Using one or more software firewalls (also known as _host-based
     firewalls_) to control which packets pass through to the cluster
     from portions of the network that do not require access to it. In
     this type of setup, a software firewall must be installed on every
     host in the cluster which might otherwise be accessible from
     outside the local network.

     The host-based option is the least expensive to implement, but
     relies purely on software to provide protection and so is the most
     difficult to keep secure.

     This type of network setup for MySQL Cluster is illustrated here:

     MySQL Cluster deployed on a network using software firewalls to
     create public and private zones

     Using this type of network setup means that there are two zones of
     MySQL Cluster hosts. Each cluster host must be able to communicate
     with all of the other machines in the cluster, but only those
     hosting SQL nodes (dotted box) can be permitted to have any
     contact with the outside, while those in the zone containing the
     data nodes and management nodes (solid box) must be isolated from
     any machines that are not part of the cluster. Applications using
     the cluster and user of those applications must _not_ be permitted
     to have direct access to the management and data node hosts.

     To accomplish this, you must set up software firewalls that limit
     the traffic to the type or types shown in the following table,
     according to the type of node that is running on each cluster host
     computer:

     This table lists node types that are accessed in a _host-based
     firewall_ cluster configuration and the traffic to permit for each
     node type.

     Type of Node to   Traffic to Permit
     be Accessed       
     SQL or API node      * It originates from the IP address of a
                            management or data node (using any TCP or UDP
                            port).
                       
                          * It originates from within the network in
                            which the cluster resides and is on the port
                            that your application is using.
     Data node or         * It originates from the IP address of a
     Management node        management or data node (using any TCP or UDP
                            port).
                       
                          * It originates from the IP address of an SQL
                            or API node.
     Any traffic other than that shown in the table for a given node
     type should be denied.

     The specifics of configuring a firewall vary from firewall
     application to firewall application, and are beyond the scope of
     this Manual. `iptables' is a very common and reliable firewall
     application, which is often used with `APF' as a front end to make
     configuration easier. You can (and should) consult the
     documentation for the software firewall that you employ, should
     you choose to implement a MySQL Cluster network setup of this
     type, or of a `mixed' type as discussed under the next item.

  3. It is also possible to employ a combination of the first two
     methods, using both hardware and software to secure the
     cluster--that is, using both network-based and host-based
     firewalls. This is between the first two schemes in terms of both
     security level and cost. This type of network setup keeps the
     cluster behind the hardware firewall, but permits incoming packets
     to travel beyond the router connecting all cluster hosts to reach
     the SQL nodes.

     One possible network deployment of a MySQL Cluster using hardware
     and software firewalls in combination is shown here:

     Network setup for MySQL Cluster using a combination of hardware
     and software firewalls to provide protection

     In this case, you can set the rules in the hardware firewall to
     deny any external traffic except to SQL nodes and API nodes, and
     then permit traffic to them only on the ports required by your
     application.

Whatever network configuration you use, remember that your objective
from the viewpoint of keeping the cluster secure remains the same--to
prevent any unessential traffic from reaching the cluster while
ensuring the most efficient communication between the nodes in the
cluster.

Because MySQL Cluster requires large numbers of ports to be open for
communications between nodes, the recommended option is to use a
segregated network. This represents the simplest way to prevent
unwanted traffic from reaching the cluster.

*Note*:

If you wish to administer a MySQL Cluster remotely (that is, from
outside the local network), the recommended way to do this is to use
`ssh' or another secure login shell to access an SQL node host. From
this host, you can then run the management client to access the
management server safely, from within the Cluster's own local network.

Even though it is possible to do so in theory, it is _not_ recommended
to use *Note `ndb_mgm': mysql-cluster-programs-ndb-mgm. to manage a
Cluster directly from outside the local network on which the Cluster is
running.  Since neither authentication nor encryption takes place
between the management client and the management server, this
represents an extremely insecure means of managing the cluster, and is
almost certain to be compromised sooner or later.


File: manual.info,  Node: mysql-cluster-security-mysql-privileges,  Next: mysql-cluster-security-mysql-security-procedures,  Prev: mysql-cluster-security-networking-issues,  Up: mysql-cluster-security

17.5.11.2 MySQL Cluster and MySQL Privileges
............................................

In this section, we discuss how the MySQL privilege system works in
relation to MySQL Cluster and the implications of this for keeping a
MySQL Cluster secure.

Standard MySQL privileges apply to MySQL Cluster tables. This includes
all MySQL privilege types (`SELECT' privilege, `UPDATE' privilege,
`DELETE' privilege, and so on) granted on the database, table, and
column level. As with any other MySQL Server, user and privilege
information is stored in the `mysql' system database. The SQL statements
used to grant and revoke privileges on *Note `NDB': mysql-cluster.
tables, databases containing such tables, and columns within such
tables are identical in all respects with the *Note `GRANT': grant. and
*Note `REVOKE': revoke. statements used in connection with database
objects involving any (other) MySQL storage engine. The same thing is
true with respect to the *Note `CREATE USER': create-user. and *Note
`DROP USER': drop-user. statements.

It is important to keep in mind that, by default, the MySQL grant
tables use the *Note `MyISAM': myisam-storage-engine. storage engine.
Because of this, those tables are not normally duplicated or shared
among MySQL servers acting as SQL nodes in a MySQL Cluster. In other
words, changes in users and their privileges do not automatically
propagate between SQL nodes by default. In MySQL Cluster NDB 7.2 (and
later), you can enable automatic distribution of MySQL users and
privileges across MySQL Cluster SQL nodes; see *Note
mysql-cluster-privilege-distribution::, for details.

Conversely, because there is no way in MySQL to deny privileges
(privileges can either be revoked or not granted in the first place,
but not denied as such), there is no special protection for *Note
`NDB': mysql-cluster. tables on one SQL node from users that have
privileges on another SQL node; (This is true even if you are not using
automatic distribution of user privileges. The definitive example of
this is the MySQL `root' account, which can perform any action on any
database object. In combination with empty `[mysqld]' or `[api]'
sections of the `config.ini' file, this account can be especially
dangerous. To understand why, consider the following scenario:

   * The `config.ini' file contains at least one empty `[mysqld]' or
     `[api]' section. This means that the MySQL Cluster management
     server performs no checking of the host from which a MySQL Server
     (or other API node) accesses the MySQL Cluster.

   * There is no firewall, or the firewall fails to protect against
     access to the MySQL Cluster from hosts external to the network.

   * The host name or IP address of the MySQL Cluster's management
     server is known or can be determined from outside the network.

If these conditions are true, then anyone, anywhere can start a MySQL
Server with `--ndbcluster' `--ndb-connectstring=MANAGEMENT_HOST' and
access this MySQL Cluster. Using the MySQL `root' account, this person
can then perform the following actions:

   * Execute metadata statements such as *Note `SHOW DATABASES':
     show-databases. statement (to obtain a list of all *Note `NDB':
     mysql-cluster.  databases on the server) or *Note `SHOW TABLES
     FROM SOME_NDB_DATABASE': show-tables.  statement to obtain a list
     of all *Note `NDB': mysql-cluster. tables in a given database

   * Run any legal MySQL statements on any of the discovered tables,
     such as:

        * `SELECT * FROM SOME_TABLE' to read all the data from any table

        * `DELETE FROM SOME_TABLE' to delete all the data from a table

        * `DESCRIBE SOME_TABLE' or `SHOW CREATE TABLE SOME_TABLE' to
          determine the table schema

        * `UPDATE SOME_TABLE SET COLUMN1 = SOME_VALUE' to fill a table
          column with `garbage' data; this could actually cause much
          greater damage than simply deleting all the data

          More insidious variations might include statements like these:

               UPDATE SOME_TABLE SET AN_INT_COLUMN = AN_INT_COLUMN + 1

          or

               UPDATE SOME_TABLE SET A_VARCHAR_COLUMN = REVERSE(A_VARCHAR_COLUMN)

          Such malicious statements are limited only by the imagination
          of the attacker.

     The only tables that would be safe from this sort of mayhem would
     be those tables that were created using storage engines other than
     *Note `NDB': mysql-cluster, and so not visible to a `rogue' SQL
     node.

     A user who can log in as `root' can also access the
     `INFORMATION_SCHEMA' database and its tables, and so obtain
     information about databases, tables, stored routines, scheduled
     events, and any other database objects for which metadata is
     stored in `INFORMATION_SCHEMA'.

     It is also a very good idea to use different passwords for the
     `root' accounts on different MySQL Cluster SQL nodes unless you
     are using distributed privileges.

In sum, you cannot have a safe MySQL Cluster if it is directly
accessible from outside your local network.

*Important*:

_Never leave the MySQL root account password empty_. This is just as
true when running MySQL as a MySQL Cluster SQL node as it is when
running it as a standalone (non-Cluster) MySQL Server, and should be
done as part of the MySQL installation process before configuring the
MySQL Server as an SQL node in a MySQL Cluster.

Prior to MySQL Cluster NDB 7.2, you should never convert the system
tables in the `mysql' database to use the *Note `NDB': mysql-cluster.
storage engine. There are a number of reasons why you should not do
this, but the most important reason is this: _Many of the SQL statements
that affect `mysql' tables storing information about user privileges,
stored routines, scheduled events, and other database objects cease to
function if these tables are changed to use any storage engine other
than `MyISAM'_. This is a consequence of various MySQL Server
internals. Beginning with MySQL Cluster NDB 7.2, you can use a stored
procedure provided for this purpose (see *Note
mysql-cluster-privilege-distribution::), but you are strongly advised
not to attempt convert the system tables manually.

Otherwise, if you need to synchronize `mysql' system tables between SQL
nodes, you can use standard MySQL replication to do so, or employ a
script to copy table entries between the MySQL servers.

Summary

The most important points to remember regarding the MySQL privilege
system with regard to MySQL Cluster are listed here:

  1. Users and privileges established on one SQL node do not
     automatically exist or take effect on other SQL nodes in the
     cluster. Conversely, removing a user or privilege on one SQL node
     in the cluster does not remove the user or privilege from any
     other SQL nodes.

  2. You can distribute MySQL users and privileges among SQL nodes
     using the SQL script, and the stored procedures it contains, that
     are supplied for this purpose in the MySQL Cluster distribution.

  3. Once a MySQL user is granted privileges on an *Note `NDB':
     mysql-cluster. table from one SQL node in a MySQL Cluster, that
     user can `see' any data in that table regardless of the SQL node
     from which the data originated, even if you are not using privilege
     distribution.


File: manual.info,  Node: mysql-cluster-security-mysql-security-procedures,  Prev: mysql-cluster-security-mysql-privileges,  Up: mysql-cluster-security

17.5.11.3 MySQL Cluster and MySQL Security Procedures
.....................................................

In this section, we discuss MySQL standard security procedures as they
apply to running MySQL Cluster.

In general, any standard procedure for running MySQL securely also
applies to running a MySQL Server as part of a MySQL Cluster. First and
foremost, you should always run a MySQL Server as the `mysql' system
user; this is no different from running MySQL in a standard
(non-Cluster) environment. The `mysql' system account should be
uniquely and clearly defined. Fortunately, this is the default behavior
for a new MySQL installation. You can verify that the *Note `mysqld':
mysqld. process is running as the system user `mysql' by using the
system command such as the one shown here:

     shell> ps aux | grep mysql
     root     10467  0.0  0.1   3616  1380 pts/3    S    11:53   0:00 \
       /bin/sh ./mysqld_safe --ndbcluster --ndb-connectstring=localhost:1186
     mysql    10512  0.2  2.5  58528 26636 pts/3    Sl   11:53   0:00 \
       /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql \
       --datadir=/usr/local/mysql/var --user=mysql --ndbcluster \
       --ndb-connectstring=localhost:1186 --pid-file=/usr/local/mysql/var/mothra.pid \
       --log-error=/usr/local/mysql/var/mothra.err
     jon      10579  0.0  0.0   2736   688 pts/0    S+   11:54   0:00 grep mysql

If the *Note `mysqld': mysqld. process is running as any other user
than `mysql', you should immediately shut it down and restart it as the
`mysql' user. If this user does not exist on the system, the `mysql'
user account should be created, and this user should be part of the
`mysql' user group; in this case, you should also make sure that the
MySQL data directory on this system (as set using the `--datadir'
option for *Note `mysqld': mysqld.) is owned by the `mysql' user, and
that the SQL node's `my.cnf' file includes `user=mysql' in the
`[mysqld]' section. Alternatively, you can start the MySQL server
process with `--user=mysql' on the command line, but it is preferable
to use the `my.cnf' option, since you might forget to use the
command-line option and so have *Note `mysqld': mysqld. running as
another user unintentionally. The *Note `mysqld_safe': mysqld-safe.
startup script forces MySQL to run as the `mysql' user.

*Important*:

Never run *Note `mysqld': mysqld. as the system root user.  Doing so
means that potentially any file on the system can be read by MySQL, and
thus--should MySQL be compromised--by an attacker.

As mentioned in the previous section (see *Note
mysql-cluster-security-mysql-privileges::), you should always set a
root password for the MySQL Server as soon as you have it running. You
should also delete the anonymous user account that is installed by
default. You can accomplish these tasks using the following statements:

     shell> mysql -u root

     mysql> UPDATE mysql.user
         ->     SET Password=PASSWORD('SECURE_PASSWORD')
         ->     WHERE User='root';

     mysql> DELETE FROM mysql.user
         ->     WHERE User='';

     mysql> FLUSH PRIVILEGES;

Be very careful when executing the *Note `DELETE': delete. statement
not to omit the `WHERE' clause, or you risk deleting _all_ MySQL users.
Be sure to run the *Note `FLUSH PRIVILEGES': flush. statement as soon
as you have modified the `mysql.user' table, so that the changes take
immediate effect. Without *Note `FLUSH PRIVILEGES': flush, the changes
do not take effect until the next time that the server is restarted.

*Note*:

Many of the MySQL Cluster utilities such as *Note `ndb_show_tables':
mysql-cluster-programs-ndb-show-tables, *Note `ndb_desc':
mysql-cluster-programs-ndb-desc, and *Note `ndb_select_all':
mysql-cluster-programs-ndb-select-all. also work without authentication
and can reveal table names, schemas, and data.  By default these are
installed on Unix-style systems with the permissions `wxr-xr-x' (755),
which means they can be executed by any user that can access the
`mysql/bin' directory.

See *Note mysql-cluster-programs::, for more information about these
utilities.


File: manual.info,  Node: mysql-cluster-disk-data,  Next: mysql-cluster-online-add-node,  Prev: mysql-cluster-security,  Up: mysql-cluster-management

17.5.12 MySQL Cluster Disk Data Tables
--------------------------------------

* Menu:

* mysql-cluster-disk-data-objects::  MySQL Cluster Disk Data Objects
* mysql-cluster-disk-data-symlinks::  Using Symbolic Links with Disk Data Objects
* mysql-cluster-disk-data-storage-requirements::  MySQL Cluster Disk Data Storage Requirements

It is possible to store the nonindexed columns of *Note `NDB':
mysql-cluster. tables on disk, rather than in RAM.

As part of implementing MySQL Cluster Disk Data work, a number of
improvements were made in MySQL Cluster for the efficient handling of
very large amounts (terabytes) of data during node recovery and
restart. These include a `no-steal' algorithm for synchronizing a
starting node with very large data sets. For more information, see the
paper `Recovery Principles of MySQL Cluster 5.1
(http://www.vldb2005.org/program/paper/wed/p1108-ronstrom.pdf)', by
MySQL Cluster developers Mikael Ronstro"m and Jonas Oreland.

MySQL Cluster Disk Data performance can be influenced by a number of
configuration parameters. For information about these parameters and
their effects, see `MySQL Cluster Disk Data configuration parameters'
and `MySQL Cluster Disk Data storage and `GCP Stop' errors'

The performance of a MySQL Cluster that uses Disk Data storage can also
be greatly improved by separating data node file systems from undo log
files and tablespace data files, which can be done using symbolic
links. For more information, see *Note
mysql-cluster-disk-data-symlinks::.


File: manual.info,  Node: mysql-cluster-disk-data-objects,  Next: mysql-cluster-disk-data-symlinks,  Prev: mysql-cluster-disk-data,  Up: mysql-cluster-disk-data

17.5.12.1 MySQL Cluster Disk Data Objects
.........................................

MySQL Cluster Disk Data storage is implemented using a number of _Disk
Data objects_. These include the following:

   * _Tablespaces_ act as containers for other Disk Data objects.

   * _Undo log files_ undo information required for rolling back
     transactions.

   * One or more undo log files are assigned to a _log file group_,
     which is then assigned to a tablespace.

   * _Data files_ store Disk Data table data. A data file is assigned
     directly to a tablespace.

Undo log files and data files are actual files in the file system of
each data node; by default they are placed in `ndb_NODE_ID_fs' in the
DATADIR specified in the MySQL Cluster `config.ini' file, and where
NODE_ID is the data node's node ID. It is possible to place these
elsewhere by specifying either an absolute or relative path as part of
the filename when creating the undo log or data file. Statements that
create these files are shown later in this section.

MySQL Cluster tablespaces and log file groups are not implemented as
files.

*Important*:

Although not all Disk Data objects are implemented as files, they all
share the same namespace. This means that _each Disk Data object_ must
be uniquely named (and not merely each Disk Data object of a given
type).  For example, you cannot have a tablespace and a log file group
both named `dd1'.

Assuming that you have already set up a MySQL Cluster with all nodes
(including management and SQL nodes), the basic steps for creating a
MySQL Cluster table on disk are as follows:

  1. Create a log file group, and assign one or more undo log files to
     it (an undo log file is also sometimes referred to as an
     _undofile_).

     *Note*:

     Undo log files are necessary only for Disk Data tables; they are
     not used for *Note `NDBCLUSTER': mysql-cluster. tables that are
     stored only in memory.

  2. Create a tablespace; assign the log file group, as well as one or
     more data files, to the tablespace.

  3. Create a Disk Data table that uses this tablespace for data
     storage.

Each of these tasks can be accomplished using SQL statements in the
*Note `mysql': mysql. client or other MySQL client application, as
shown in the example that follows.

  1. We create a log file group named `lg_1' using *Note `CREATE
     LOGFILE GROUP': create-logfile-group.  This log file group is to
     be made up of two undo log files, which we name `undo_1.log' and
     `undo_2.log', whose initial sizes are 16 MB and 12 MB,
     respectively. (The default initial size for an undo log file is
     128 MB.) Optionally, you can also specify a size for the log file
     group's undo buffer, or permit it to assume the default value of 8
     MB. In this example, we set the UNDO buffer's size at 2 MB. A log
     file group must be created with an undo log file; so we add
     `undo_1.log' to `lg_1' in this *Note `CREATE LOGFILE GROUP':
     create-logfile-group.  statement:

          CREATE LOGFILE GROUP lg_1
              ADD UNDOFILE 'undo_1.log'
              INITIAL_SIZE 16M
              UNDO_BUFFER_SIZE 2M
              ENGINE NDBCLUSTER;

     To add `undo_2.log' to the log file group, use the following *Note
     `ALTER LOGFILE GROUP': alter-logfile-group. statement:

          ALTER LOGFILE GROUP lg_1
              ADD UNDOFILE 'undo_2.log'
              INITIAL_SIZE 12M
              ENGINE NDBCLUSTER;

     Some items of note:

        * The `.log' file extension used here is not required. We use
          it merely to make the log files easily recognisable.

        * Every *Note `CREATE LOGFILE GROUP': create-logfile-group. and
          *Note `ALTER LOGFILE GROUP': alter-logfile-group. statement
          must include an `ENGINE' clause. In MySQL Cluster NDB 7.2,
          the only permitted values for this clause are *Note
          `NDBCLUSTER': mysql-cluster. and *Note `NDB': mysql-cluster.

          *Important*:

          There can exist at most one log file group in the same MySQL
          Cluster at any given time.

        * When you add an undo log file to a log file group using `ADD
          UNDOFILE 'FILENAME'', a file with the name FILENAME is
          created in the `ndb_NODE_ID_fs' directory within the
          `DataDir' of each data node in the cluster, where NODE_ID is
          the node ID of the data node. Each undo log file is of the
          size specified in the SQL statement. For example, if a MySQL
          Cluster has 4 data nodes, then the *Note `ALTER LOGFILE
          GROUP': alter-logfile-group. statement just shown creates 4
          undo log files, 1 each on in the data directory of each of
          the 4 data nodes; each of these files is named `undo_2.log'
          and each file is 12 MB in size.

        * `UNDO_BUFFER_SIZE' is limited by the amount of system memory
          available.

        * For more information about the *Note `CREATE LOGFILE GROUP':
          create-logfile-group.  statement, see *Note
          create-logfile-group::.  For more information about *Note
          `ALTER LOGFILE GROUP': alter-logfile-group, see *Note
          alter-logfile-group::.

  2. Now we can create a tablespace, which contains files to be used by
     MySQL Cluster Disk Data tables for storing their data. A
     tablespace is also associated with a particular log file group.
     When creating a new tablespace, you must specify the log file
     group which it is to use for undo logging; you must also specify a
     data file. You can add more data files to the tablespace after the
     tablespace is created; it is also possible to drop data files from
     a tablespace (an example of dropping data files is provided later
     in this section).

     Assume that we wish to create a tablespace named `ts_1' which uses
     `lg_1' as its log file group. This tablespace is to contain two
     data files named `data_1.dat' and `data_2.dat', whose initial
     sizes are 32 MB and 48 MB, respectively. (The default value for
     `INITIAL_SIZE' is 128 MB.) We can do this using two SQL
     statements, as shown here:

          CREATE TABLESPACE ts_1
              ADD DATAFILE 'data_1.dat'
              USE LOGFILE GROUP lg_1
              INITIAL_SIZE 32M
              ENGINE NDBCLUSTER;

          ALTER TABLESPACE ts_1
              ADD DATAFILE 'data_2.dat'
              INITIAL_SIZE 48M
              ENGINE NDBCLUSTER;

     The *Note `CREATE TABLESPACE': create-tablespace.  statement
     creates a tablespace `ts_1' with the data file `data_1.dat', and
     associates `ts_1' with log file group `lg_1'. The *Note `ALTER
     TABLESPACE': alter-tablespace. adds the second data file
     (`data_2.dat').

     Some items of note:

        * As is the case with the `.log' file extension used in this
          example for undo log files, there is no special significance
          for the `.dat' file extension; it is used merely for easy
          recognition of data files.

        * When you add a data file to a tablespace using `ADD DATAFILE
          'FILENAME'', a file with the name FILENAME is created in the
          `ndb_NODE_ID_fs' directory within the `DataDir' of each data
          node in the cluster, where NODE_ID is the node ID of the data
          node. Each data file is of the size specified in the SQL
          statement. For example, if a MySQL Cluster has 4 data nodes,
          then the *Note `ALTER TABLESPACE': alter-tablespace.
          statement just shown creates 4 data files, 1 each in the data
          directory of each of the 4 data nodes; each of these files is
          named `data_2.dat' and each file is 48 MB in size.

        * All *Note `CREATE TABLESPACE': create-tablespace. and *Note
          `ALTER TABLESPACE': alter-tablespace.  statements must
          contain an `ENGINE' clause; only tables using the same
          storage engine as the tablespace can be created in the
          tablespace. In MySQL MySQL Cluster NDB 7.2, the only
          permitted values for this clause are *Note `NDBCLUSTER':
          mysql-cluster.  and *Note `NDB': mysql-cluster.

        * For more information about the *Note `CREATE TABLESPACE':
          create-tablespace. and *Note `ALTER TABLESPACE':
          alter-tablespace.  statements, see *Note create-tablespace::,
          and *Note alter-tablespace::.

  3. Now it is possible to create a table whose nonindexed columns are
     stored on disk in the tablespace `ts_1':

          CREATE TABLE dt_1 (
              member_id INT UNSIGNED NOT NULL AUTO_INCREMENT PRIMARY KEY,
              last_name VARCHAR(50) NOT NULL,
              first_name VARCHAR(50) NOT NULL,
              dob DATE NOT NULL,
              joined DATE NOT NULL,
              INDEX(last_name, first_name)
              )
              TABLESPACE ts_1 STORAGE DISK
              ENGINE NDBCLUSTER;

     The `TABLESPACE ... STORAGE DISK' option tells the *Note
     `NDBCLUSTER': mysql-cluster. storage engine to use tablespace
     `ts_1' for disk data storage.

     *Note*:

     It is also possible to specify whether an individual column is
     stored on disk or in memory by using a `STORAGE' clause as part of
     the column's definition in a *Note `CREATE TABLE': create-table.
     or *Note `ALTER TABLE': alter-table. statement. `STORAGE DISK'
     causes the column to be stored on disk, and `STORAGE MEMORY'
     causes in-memory storage to be used. See *Note create-table::, for
     more information.

     Once table `ts_1' has been created as shown, you can perform *Note
     `INSERT': insert, *Note `SELECT': select, *Note `UPDATE': update,
     and *Note `DELETE': delete. statements on it just as you would
     with any other MySQL table.

     For table `dt_1' as it has been defined here, only the `dob' and
     `joined' columns are stored on disk. This is because there are
     indexes on the `id', `last_name', and `first_name' columns, and so
     data belonging to these columns is stored in RAM. In MySQL Cluster
     NDB 7.2, only nonindexed columns can be held on disk; indexes and
     indexed column data continue to be stored in memory. This tradeoff
     between the use of indexes and conservation of RAM is something
     you must keep in mind as you design Disk Data tables.

Performance note

The performance of a cluster using Disk Data storage is greatly
improved if Disk Data files are kept on a separate physical disk from
the data node file system. This must be done for each data node in the
cluster to derive any noticeable benefit.

You may use absolute and relative file system paths with `ADD UNDOFILE'
and `ADD DATAFILE'. Relative paths are calculated relative to the data
node's data directory. You may also use symbolic links; see *Note
mysql-cluster-disk-data-symlinks::, for more information and examples.

A log file group, a tablespace, and any Disk Data tables using these
must be created in a particular order. The same is true for dropping
any of these objects:

   * A log file group cannot be dropped as long as any tablespaces are
     using it.

   * A tablespace cannot be dropped as long as it contains any data
     files.

   * You cannot drop any data files from a tablespace as long as there
     remain any tables which are using the tablespace.

   * It is not possible to drop files created in association with a
     different tablespace than the one with which the files were
     created. (Bug #20053)

For example, to drop all the objects created so far in this section,
you would use the following statements:

     mysql> DROP TABLE dt_1;

     mysql> ALTER TABLESPACE ts_1
         -> DROP DATAFILE 'data_2.dat'
         -> ENGINE NDBCLUSTER;

     mysql> ALTER TABLESPACE ts_1
         -> DROP DATAFILE 'data_1.dat'
         -> ENGINE NDBCLUSTER;

     mysql> DROP TABLESPACE ts_1
         -> ENGINE NDBCLUSTER;

     mysql> DROP LOGFILE GROUP lg_1
         -> ENGINE NDBCLUSTER;

These statements must be performed in the order shown, except that the
two `ALTER TABLESPACE ... DROP DATAFILE' statements may be executed in
either order.

You can obtain information about data files used by Disk Data tables by
querying the *Note `FILES': files-table. table in the
`INFORMATION_SCHEMA' database. An extra ``NULL' row' provides additional
information about undo log files. For more information and examples,
see *Note files-table::.

It is also possible to view information about allocated and free disk
space for each Disk Data table or table partition using the *Note
`ndb_desc': mysql-cluster-programs-ndb-desc. utility. For more
information, see *Note mysql-cluster-programs-ndb-desc::.


File: manual.info,  Node: mysql-cluster-disk-data-symlinks,  Next: mysql-cluster-disk-data-storage-requirements,  Prev: mysql-cluster-disk-data-objects,  Up: mysql-cluster-disk-data

17.5.12.2 Using Symbolic Links with Disk Data Objects
.....................................................

The performance of a MySQL Cluster that uses Disk Data storage can be
greatly improved by separating data node file systems from undo log
files and tablespace data files and placing these on different disks.
In early versions of MySQL Cluster, there was no direct support for
this in MySQL Cluster, but it was possible to achieve this separation
using symbolic links as described in this section. MySQL Cluster NDB
7.2 supports the data node configuration parameters `FileSystemPathDD',
`FileSystemPathDataFiles', and `FileSystemPathUndoFiles', which make
the use of symbolic links for this purpose unnecessary. For more
information about these parameters, see *Note
mysql-cluster-ndbd-disk-data-filesystem-parameters::.

Each data node in the cluster creates a file system in the directory
named `ndb_NODE_ID_fs' under the data node's `DataDir' as defined in
the `config.ini' file. In this example, we assume that each data node
host has 3 disks, aliased as `/data0', `/data1', and `/data2', and that
the cluster's `config.ini' includes the following:

     [ndbd default]
     DataDir= /data0

Our objective is to place all Disk Data log files in `/data1', and all
Disk Data data files in `/data2', on each data node host.

*Note*:

In this example, we assume that the cluster's data node hosts are all
using Linux operating systems. For other platforms, you may need to
substitute you operating system's commands for those shown here.

To accomplish this, perform the following steps:

   * Under the data node file system create symbolic links pointing to
     the other drives:

          shell> cd /data0/ndb_2_fs
          shell> ls
          D1  D10  D11  D2  D8  D9  LCP
          shell> ln -s /data0 dnlogs
          shell> ln -s /data1 dndata

     You should now have two symbolic links:

          shell> ls -l --hide=D*
          lrwxrwxrwx 1 user group   30 2007-03-19 13:58 dndata -> /data1
          lrwxrwxrwx 1 user group   30 2007-03-19 13:59 dnlogs -> /data2

     We show this only for the data node with node ID 2; however, you
     must do this for _each_ data node.

   * Now, in the *Note `mysql': mysql. client, create a log file group
     and tablespace using the symbolic links, as shown here:

          mysql> CREATE LOGFILE GROUP lg1
              ->    ADD UNDOFILE 'dnlogs/undo1.log'
              ->    INITIAL_SIZE 150M
              ->    UNDO_BUFFER_SIZE = 1M
              ->    ENGINE=NDBCLUSTER;

          mysql> CREATE TABLESPACE ts1
              ->    ADD DATAFILE 'dndata/data1.log'
              ->    USE LOGFILE GROUP lg1
              ->    INITIAL_SIZE 1G
              ->    ENGINE=NDBCLUSTER;

     Verify that the files were created and placed correctly as shown
     here:

          shell> cd /data1
          shell> ls -l
          total 2099304
          -rw-rw-r--  1 user group 157286400 2007-03-19 14:02 undo1.dat

          shell> cd /data2
          shell> ls -l
          total 2099304
          -rw-rw-r--  1 user group 1073741824 2007-03-19 14:02 data1.dat

   * If you are running multiple data nodes on one host, you must take
     care to avoid having them try to use the same space for Disk Data
     files. You can make this easier by creating a symbolic link in
     each data node file system. Suppose you are using `/data0' for
     both data node file systems, but you wish to have the Disk Data
     files for both nodes on `/data1'. In this case, you can do
     something similar to what is shown here:

          shell> cd /data0
          shell> ln -s /data1/dn2 ndb_2_fs/dd
          shell> ln -s /data1/dn3 ndb_3_fs/dd
          shell> ls -l --hide=D* ndb_2_fs
          lrwxrwxrwx 1 user group   30 2007-03-19 14:22 dd -> /data1/dn2
          shell> ls -l --hide=D* ndb_3_fs
          lrwxrwxrwx 1 user group   30 2007-03-19 14:22 dd -> /data1/dn3

   * Now you can create a logfile group and tablespace using the
     symbolic link, like this:

          mysql> CREATE LOGFILE GROUP lg1
              ->    ADD UNDOFILE 'dd/undo1.log'
              ->    INITIAL_SIZE 150M
              ->    UNDO_BUFFER_SIZE = 1M
              ->    ENGINE=NDBCLUSTER;

          mysql> CREATE TABLESPACE ts1
              ->    ADD DATAFILE 'dd/data1.log'
              ->    USE LOGFILE GROUP lg1
              ->    INITIAL_SIZE 1G
              ->    ENGINE=NDBCLUSTER;

     Verify that the files were created and placed correctly as shown
     here:

          shell> cd /data1
          shell> ls
          dn2        dn3
          shell> ls dn2
          undo1.log        data1.log
          shell> ls dn3
          undo1.log        data1.log


File: manual.info,  Node: mysql-cluster-disk-data-storage-requirements,  Prev: mysql-cluster-disk-data-symlinks,  Up: mysql-cluster-disk-data

17.5.12.3 MySQL Cluster Disk Data Storage Requirements
......................................................

The following items apply to Disk Data storage requirements:

   * Variable-length columns of Disk Data tables take up a fixed amount
     of space. For each row, this is equal to the space required to
     store the largest possible value for that column.

     For general information about calculating these values, see *Note
     storage-requirements::.

     You can obtain an estimate the amount of space available in data
     files and undo log files by querying the *Note
     `INFORMATION_SCHEMA.FILES': files-table. table.  For more
     information and examples, see *Note files-table::.

     *Note*:

     The *Note `OPTIMIZE TABLE': optimize-table.  statement does not
     have any effect on Disk Data tables.

   * In a Disk Data table, the first 256 bytes of a *Note `TEXT': blob.
     or *Note `BLOB': blob. column are stored in memory; only the
     remainder is stored on disk.

   * Each row in a Disk Data table uses 8 bytes in memory to point to
     the data stored on disk. This means that, in some cases,
     converting an in-memory column to the disk-based format can
     actually result in greater memory usage. For example, converting a
     `CHAR(4)' column from memory-based to disk-based format increases
     the amount of `DataMemory' used per row from 4 to 8 bytes.

*Important*:

Starting the cluster with the `--initial' option does _not_ remove Disk
Data files.  You must remove these manually prior to performing an
initial restart of the cluster.

Performance of Disk Data tables can be improved by minimizing the
number of disk seeks by making sure that `DiskPageBufferMemory' is of
sufficient size. You can query the *Note `diskpagebuffer':
mysql-cluster-ndbinfo-diskpagebuffer. table to help determine whether
the value for this parameter needs to be increased.


File: manual.info,  Node: mysql-cluster-online-add-node,  Next: mysql-cluster-privilege-distribution,  Prev: mysql-cluster-disk-data,  Up: mysql-cluster-management

17.5.13 Adding MySQL Cluster Data Nodes Online
----------------------------------------------

* Menu:

* mysql-cluster-online-add-node-remarks::  Adding MySQL Cluster Data Nodes Online: General Issues
* mysql-cluster-online-add-node-basics::  Adding MySQL Cluster Data Nodes Online: Basic procedure
* mysql-cluster-online-add-node-example::  Adding MySQL Cluster Data Nodes Online: Detailed Example

This section describes how to add MySQL Cluster data nodes
`online'--that is, without needing to shut down the cluster completely
and restart it as part of the process.

*Important*:

Currently, you must add new data nodes to a MySQL Cluster as part of a
new node group. In addition, it is not possible to change the number of
replicas (or the number of nodes per node group) online.


File: manual.info,  Node: mysql-cluster-online-add-node-remarks,  Next: mysql-cluster-online-add-node-basics,  Prev: mysql-cluster-online-add-node,  Up: mysql-cluster-online-add-node

17.5.13.1 Adding MySQL Cluster Data Nodes Online: General Issues
................................................................

This section provides general information about the behavior of and
current limitations in adding MySQL Cluster nodes online.

Redistribution of Data

The ability to add new nodes online includes a means to reorganize
*Note `NDBCLUSTER': mysql-cluster. table data and indexes so that they
are distributed across all data nodes, including the new ones, by means
of the *Note `ALTER ONLINE TABLE ... REORGANIZE PARTITION':
alter-table-partition-operations. statement.  Table reorganization of
both in-memory and Disk Data tables is supported. This redistribution
does not currently include unique indexes (only ordered indexes are
redistributed). Prior to MySQL Cluster NDB 7.2.14, `BLOB' table data is
also not redistributed using this method (Bug #13714148).

The redistribution for *Note `NDBCLUSTER': mysql-cluster.  tables
already existing before the new data nodes were added is not automatic,
but can be accomplished using simple SQL statements in *Note `mysql':
mysql. or another MySQL client application. However, all data and
indexes added to tables created after a new node group has been added
are distributed automatically among all cluster data nodes, including
those added as part of the new node group.

Partial starts

It is possible to add a new node group without all of the new data
nodes being started. It is also possible to add a new node group to a
degraded cluster--that is, a cluster that is only partially started, or
where one or more data nodes are not running. In the latter case, the
cluster must have enough nodes running to be viable before the new node
group can be added.

Effects on ongoing operations

Normal DML operations using MySQL Cluster data are not prevented by the
creation or addition of a new node group, or by table reorganization.
However, it is not possible to perform DDL concurrently with table
reorganization--that is, no other DDL statements can be issued while an
*Note `ALTER TABLE ... REORGANIZE PARTITION': alter-table. statement is
executing. In addition, during the execution of `ALTER TABLE ...
REORGANIZE PARTITION' (or the execution of any other DDL statement), it
is not possible to restart cluster data nodes.

Failure handling

Failures of data nodes during node group creation and table
reorganization are handled as hown in the following table:

This table describes how data node failures during node group creation
and table reorganization are handled. The first column identifies when
the failure occurs (during node group creation or table
reorganization). The second column describes where the failures occur
and is divided into three sub columns (Old data nodes, New data nodes,
and System).

Failure occurs     Failure occurs in:                    
during:                                                  
`Old' data nodes   `New' data nodes   System             
Node group            * If a node        * If a node        * If the
creation                other than         other than         execution of
                        the master         the master         `CREATE
                        fails:             fails:             NODEGROUP'
                                                              has reached
                        The creation       The creation       the internal
                        of the node        of the node        commit point:
                        group is           group is      
                        always rolled      always rolled      When
                        forward.           forward.           restarted,
                                                              the cluster
                      * If the           * If the             includes the
                        master fails:      master fails:      new node
                                                              group.
                           * If the           * If the        Otherwise it
                             internal           internal      without.
                             commit             commit   
                             point              point       * If the
                             has                has           execution of
                             been               been          `CREATE
                             reached:           reached:      NODEGROUP'
                                                              has not yet
                             The                The           reached the
                             creation           creation      internal
                             of the             of the        commit point:
                             node               node     
                             group              group         When
                             is                 is            restarted,
                             rolled             rolled        the cluster
                             forward.           forward.      does not
                                                              include the
                           * If the           * If the        new node
                             internal           internal      group.
                             commit             commit   
                             point              point    
                             has not            has not  
                             yet                yet      
                             been               been     
                             reached            reached  
                                                         
                             The                The      
                             creation           creation 
                             of the             of the   
                             node               node     
                             group              group    
                             is                 is       
                             rolled             rolled   
                             back               back     
Table                 * If a node        * If a node        * If the
reorganization          other than         other than         execution of
                        the master         the master         an `ALTER
                        fails:             fails:             ONLINE TABLE
                                                              TABLE
                        The table          The table          REORGANIZE
                        reorganization     reorganization     PARTITION'
                        is always          is always          statement
                        rolled             rolled             has reached
                        forward.           forward.           the internal
                                                              commit point:
                      * If the           * If the        
                        master fails:      master fails:      When the
                                                              cluster is
                           * If the           * If the        restarted,
                             internal           internal      the data and
                             commit             commit        indexes
                             point              point         belonging to
                             has                has           TABLE are
                             been               been          distributed
                             reached:           reached:      using the
                                                              `new' data
                             The                The           nodes.
                             table              table    
                             reorganization          reorganization   * If the
                             is                 is            execution of
                             rolled             rolled        an `ALTER
                             forward.           forward.      ONLINE TABLE
                                                              TABLE
                           * If the           * If the        REORGANIZE
                             internal           internal      PARTITION'
                             commit             commit        statement
                             point              point         has not yet
                             has not            has not       reached the
                             yet                yet           internal
                             been               been          commit point:
                             reached            reached  
                                                              When the
                             The                The           cluster is
                             table              table         restarted,
                             reorganization          reorganization     the data and
                             is                 is            indexes
                             rolled             rolled        belonging to
                             back.              back.         TABLE are
                                                              distributed
                                                              using only
                                                              the `old'
                                                              data nodes.
Dropping node groups

The *Note `ndb_mgm': mysql-cluster-programs-ndb-mgm. client supports a
`DROP NODEGROUP' command, but it is possible to drop a node group only
when no data nodes in the node group contain any data. Since there is
currently no way to `empty' a specific data node or node group, this
command works only the following two cases:

  1. After issuing `CREATE NODEGROUP' in the *Note `ndb_mgm':
     mysql-cluster-programs-ndb-mgm. client, but before issuing any
     *Note `ALTER ONLINE TABLE ... REORGANIZE PARTITION': alter-table.
     statements in the *Note `mysql': mysql. client.

  2. After dropping all *Note `NDBCLUSTER': mysql-cluster.  tables
     using *Note `DROP TABLE': drop-table.

     *Note `TRUNCATE TABLE': truncate-table. does not work for this
     purpose because the data nodes continue to store the table
     definitions.


File: manual.info,  Node: mysql-cluster-online-add-node-basics,  Next: mysql-cluster-online-add-node-example,  Prev: mysql-cluster-online-add-node-remarks,  Up: mysql-cluster-online-add-node

17.5.13.2 Adding MySQL Cluster Data Nodes Online: Basic procedure
.................................................................

In this section, we list the basic steps required to add new data nodes
to a MySQL Cluster. This procedure applies whether you are using *Note
`ndbd': mysql-cluster-programs-ndbd. or *Note `ndbmtd':
mysql-cluster-programs-ndbmtd. binaries for the data node processes.
For a more detailed example, see *Note
mysql-cluster-online-add-node-example::.

Assuming that you already have a running MySQL Cluster, adding data
nodes online requires the following steps:

  1. Edit the cluster configuration `config.ini' file, adding new
     `[ndbd]' sections corresponding to the nodes to be added. In the
     case where the cluster uses multiple management servers, these
     changes need to be made to all `config.ini' files used by the
     management servers.

     You must be careful that node IDs for any new data nodes added in
     the `config.ini' file do not overlap node IDs used by existing
     nodes. In the event that you have API nodes using dynamically
     allocated node IDs and these IDs match node IDs that you want to
     use for new data nodes, it is possible to force any such API nodes
     to `migrate', as described later in this procedure.

  2. Perform a rolling restart of all MySQL Cluster management servers.

     *Important*:

     All management servers must be restarted with the `--reload' or
     `--initial' option to force the reading of the new configuration.

  3. Perform a rolling restart of all existing MySQL Cluster data
     nodes. It is not necessary (or usually even desirable) to use
     `--initial' when restarting the existing data nodes.

     If you are using API nodes with dynamically allocated IDs matching
     any node IDs that you wish to assign to new data nodes, you must
     restart all API nodes (including SQL nodes) before restarting any
     of the data nodes processes in this step. This causes any API
     nodes with node IDs that were previously not explicitly assigned
     to relinquish those node IDs and acquire new ones.

  4. Perform a rolling restart of any SQL or API nodes connected to the
     MySQL Cluster.

  5. Start the new data nodes.

     The new data nodes may be started in any order. They can also be
     started concurrently, as long as they are started after the
     rolling restarts of all existing data nodes have been completed,
     and before proceeding to the next step.

  6. Execute one or more `CREATE NODEGROUP' commands in the MySQL
     Cluster management client to create the new node group or node
     groups to which the new data nodes will belong.

  7. Redistribute the cluster's data among all data nodes (including
     the new ones) by issuing an *Note `ALTER ONLINE TABLE ...
     REORGANIZE PARTITION': alter-table. statement in the *Note
     `mysql': mysql. client for each *Note `NDBCLUSTER': mysql-cluster.
     table.

     *Note*:

     This needs to be done only for tables already existing at the time
     the new node group is added. Data in tables created after the new
     node group is added is distributed automatically; however, data
     added to any given table `tbl' that existed before the new nodes
     were added is not distributed using the new nodes until that table
     has been reorganized using *Note `ALTER ONLINE TABLE tbl
     REORGANIZE PARTITION': alter-table.

  8. Reclaim the space freed on the `old' nodes by issuing, for each
     *Note `NDBCLUSTER': mysql-cluster.  table, an *Note `OPTIMIZE
     TABLE': optimize-table.  statement in the *Note `mysql': mysql.
     client.

You can add all the nodes desired, then issue several `CREATE
NODEGROUP' commands in succession to add the new node groups to the
cluster.


File: manual.info,  Node: mysql-cluster-online-add-node-example,  Prev: mysql-cluster-online-add-node-basics,  Up: mysql-cluster-online-add-node

17.5.13.3 Adding MySQL Cluster Data Nodes Online: Detailed Example
..................................................................

In this section we provide a detailed example illustrating how to add
new MySQL Cluster data nodes online, starting with a MySQL Cluster
having 2 data nodes in a single node group and concluding with a
cluster having 4 data nodes in 2 node groups.

Starting configuration

For purposes of illustration, we assume a minimal configuration, and
that the cluster uses a `config.ini' file containing only the following
information:

     [ndbd default]
     DataMemory = 100M
     IndexMemory = 100M
     NoOfReplicas = 2
     DataDir = /usr/local/mysql/var/mysql-cluster

     [ndbd]
     Id = 1
     HostName = 192.168.0.1

     [ndbd]
     Id = 2
     HostName = 192.168.0.2

     [mgm]
     HostName = 192.168.0.10
     Id = 10

     [api]
     Id=20
     HostName = 192.168.0.20

     [api]
     Id=21
     HostName = 192.168.0.21

*Note*:

We have left a gap in the sequence between data node IDs and other
nodes. This make it easier later to assign node IDs that are not
already in use to data nodes which are newly added.

We also assume that you have already started the cluster using the
appropriate command line or `my.cnf' options, and that running `SHOW'
in the management client produces output similar to what is shown here:

     -- NDB Cluster -- Management Client --
     ndb_mgm> SHOW
     Connected to Management Server at: 192.168.0.10:1186
     Cluster Configuration
     ---------------------
     [ndbd(NDB)]     2 node(s)
     id=1    @192.168.0.1  (5.5.33-ndb-7.2.14, Nodegroup: 0, Master)
     id=2    @192.168.0.2  (5.5.33-ndb-7.2.14, Nodegroup: 0)

     [ndb_mgmd(MGM)] 1 node(s)
     id=10   @192.168.0.10  (5.5.33-ndb-7.2.14)

     [mysqld(API)]   2 node(s)
     id=20   @192.168.0.20  (5.5.33-ndb-7.2.14)
     id=21   @192.168.0.21  (5.5.33-ndb-7.2.14)

Finally, we assume that the cluster contains a single *Note
`NDBCLUSTER': mysql-cluster. table created as shown here:

     USE n;

     CREATE TABLE ips (
         id BIGINT NOT NULL AUTO_INCREMENT PRIMARY KEY,
         country_code CHAR(2) NOT NULL,
         type CHAR(4) NOT NULL,
         ip_address varchar(15) NOT NULL,
         addresses BIGINT UNSIGNED DEFAULT NULL,
         date BIGINT UNSIGNED DEFAULT NULL
     )   ENGINE NDBCLUSTER;

The memory usage and related information shown later in this section
was generated after inserting approximately 50000 rows into this table.

*Note*:

In this example, we show the single-threaded *Note `ndbd':
mysql-cluster-programs-ndbd. being used for the data node processes.
However--beginning with MySQL Cluster NDB 7.0.4--you can also apply
this example, if you are using the multi-threaded *Note `ndbmtd':
mysql-cluster-programs-ndbmtd. by substituting *Note `ndbmtd':
mysql-cluster-programs-ndbmtd. for *Note `ndbd':
mysql-cluster-programs-ndbd. wherever it appears in the steps that
follow. (Bug #43108)

Step 1: Update configuration file

Open the cluster global configuration file in a text editor and add
`[ndbd]' sections corresponding to the 2 new data nodes. (We give these
data nodes IDs 3 and 4, and assume that they are to be run on host
machines at addresses 192.168.0.3 and 192.168.0.4, respectively.) After
you have added the new sections, the contents of the `config.ini' file
should look like what is shown here, where the additions to the file
are shown in bold type:

     [ndbd default]
     DataMemory = 100M
     IndexMemory = 100M
     NoOfReplicas = 2
     DataDir = /usr/local/mysql/var/mysql-cluster

     [ndbd]
     Id = 1
     HostName = 192.168.0.1

     [ndbd]
     Id = 2
     HostName = 192.168.0.2
     *[ndbd]
     Id = 3
     HostName = 192.168.0.3

     [ndbd]
     Id = 4
     HostName = 192.168.0.4*

     [mgm]
     HostName = 192.168.0.10
     Id = 10

     [api]
     Id=20
     HostName = 192.168.0.20

     [api]
     Id=21
     HostName = 192.168.0.21

Once you have made the necessary changes, save the file.

Step 2: Restart the management server

Restarting the cluster management server requires that you issue
separate commands to stop the management server and then to start it
again, as follows:

  1. Stop the management server using the management client `STOP'
     command, as shown here:

          ndb_mgm> 10 STOP
          Node 10 has shut down.
          Disconnecting to allow Management Server to shutdown

          shell>

  2. Because shutting down the management server causes the management
     client to terminate, you must start the management server from the
     system shell. For simplicity, we assume that `config.ini' is in
     the same directory as the management server binary, but in
     practice, you must supply the correct path to the configuration
     file.  You must also supply the `--reload' or `--initial' option
     so that the management server reads the new configuration from the
     file rather than its configuration cache. If your shell's current
     directory is also the same as the directory where the management
     server binary is located, then you can invoke the management
     server as shown here:

          shell> ndb_mgmd -f config.ini --reload
          2008-12-08 17:29:23 [MgmSrvr] INFO     -- NDB Cluster Management Server. 5.5.33-ndb-7.2.14
          2008-12-08 17:29:23 [MgmSrvr] INFO     -- Reading cluster configuration from 'config.ini'

If you check the output of `SHOW' in the management client after
restarting the *Note `ndb_mgm': mysql-cluster-programs-ndb-mgm. process,
you should now see something like this:

     -- NDB Cluster -- Management Client --
     ndb_mgm> SHOW
     Connected to Management Server at: 192.168.0.10:1186
     Cluster Configuration
     ---------------------
     [ndbd(NDB)]     2 node(s)
     id=1    @192.168.0.1  (5.5.33-ndb-7.2.14, Nodegroup: 0, Master)
     id=2    @192.168.0.2  (5.5.33-ndb-7.2.14, Nodegroup: 0)
     id=3 (not connected, accepting connect from 192.168.0.3)
     id=4 (not connected, accepting connect from 192.168.0.4)

     [ndb_mgmd(MGM)] 1 node(s)
     id=10   @192.168.0.10  (5.5.33-ndb-7.2.14)

     [mysqld(API)]   2 node(s)
     id=20   @192.168.0.20  (5.5.33-ndb-7.2.14)
     id=21   @192.168.0.21  (5.5.33-ndb-7.2.14)

Step 3: Perform a rolling restart of the existing data nodes

This step can be accomplished entirely within the cluster management
client using the `RESTART' command, as shown here:

     ndb_mgm> 1 RESTART
     Node 1: Node shutdown initiated
     Node 1: Node shutdown completed, restarting, no start.
     Node 1 is being restarted

     ndb_mgm> Node 1: Start initiated (version 7.2.14)
     Node 1: Started (version 7.1.29)

     ndb_mgm> 2 RESTART
     Node 2: Node shutdown initiated
     Node 2: Node shutdown completed, restarting, no start.
     Node 2 is being restarted

     ndb_mgm> Node 2: Start initiated (version 7.2.14)

     ndb_mgm> Node 2: Started (version 7.2.14)

*Important*:

After issuing each `X RESTART' command, wait until the management client
reports `Node X: Started (version ...)' _before_ proceeding any further.

You can verify that all existing data nodes were restarted using the
updated configuration by checking the *Note `ndbinfo.nodes':
mysql-cluster-ndbinfo-nodes. table in the *Note `mysql': mysql. client.

Step 4: Perform a rolling restart of all cluster API nodes

Shut down and restart each MySQL server acting as an SQL node in the
cluster using *Note `mysqladmin shutdown': mysqladmin.  followed by
*Note `mysqld_safe': mysqld-safe. (or another startup script). This
should be similar to what is shown here, where PASSWORD is the MySQL
`root' password for a given MySQL server instance:

     shell> mysqladmin -uroot -pPASSWORD shutdown
     081208 20:19:56 mysqld_safe mysqld from pid file
     /usr/local/mysql/var/tonfisk.pid ended
     shell> mysqld_safe --ndbcluster --ndb-connectstring=192.168.0.10 &
     081208 20:20:06 mysqld_safe Logging to '/usr/local/mysql/var/tonfisk.err'.
     081208 20:20:06 mysqld_safe Starting mysqld daemon with databases
     from /usr/local/mysql/var

Of course, the exact input and output depend on how and where MySQL is
installed on the system, as well as which options you choose to start
it (and whether or not some or all of these options are specified in a
`my.cnf' file).

Step 5: Perform an initial start of the new data nodes

From a system shell on each of the hosts for the new data nodes, start
the data nodes as shown here, using the `--initial' option:

     shell> ndbd -c 192.168.0.10 --initial

*Note*:

Unlike the case with restarting the existing data nodes, you can start
the new data nodes concurrently; you do not need to wait for one to
finish starting before starting the other.

_Wait until both of the new data nodes have started before proceeding
with the next step_. Once the new data nodes have started, you can see
in the output of the management client `SHOW' command that they do not
yet belong to any node group (as indicated with bold type here):

     ndb_mgm> SHOW
     Connected to Management Server at: 192.168.0.10:1186
     Cluster Configuration
     ---------------------
     [ndbd(NDB)]     2 node(s)
     id=1    @192.168.0.1  (5.5.33-ndb-7.2.14, Nodegroup: 0, Master)
     id=2    @192.168.0.2  (5.5.33-ndb-7.2.14, Nodegroup: 0)
     id=3    @192.168.0.3  (5.5.33-ndb-7.2.14, *no nodegroup*)
     id=4    @192.168.0.4  (5.5.33-ndb-7.2.14, *no nodegroup*)

     [ndb_mgmd(MGM)] 1 node(s)
     id=10   @192.168.0.10  (5.5.33-ndb-7.2.14)

     [mysqld(API)]   2 node(s)
     id=20   @192.168.0.20  (5.5.33-ndb-7.2.14)
     id=21   @192.168.0.21  (5.5.33-ndb-7.2.14)

Step 6: Create a new node group

You can do this by issuing a `CREATE NODEGROUP' command in the cluster
management client.  This command takes as its argument a
comma-separated list of the node IDs of the data nodes to be included
in the new node group, as shown here:

     ndb_mgm> CREATE NODEGROUP 3,4
     Nodegroup 1 created

By issuing `SHOW' again, you can verify that data nodes 3 and 4 have
joined the new node group (again indicated in bold type):

     ndb_mgm> SHOW
     Connected to Management Server at: 192.168.0.10:1186
     Cluster Configuration
     ---------------------
     [ndbd(NDB)]     2 node(s)
     id=1    @192.168.0.1  (5.5.33-ndb-7.2.14, Nodegroup: 0, Master)
     id=2    @192.168.0.2  (5.5.33-ndb-7.2.14, Nodegroup: 0)
     id=3    @192.168.0.3  (5.5.33-ndb-7.2.14, *Nodegroup: 1*)
     id=4    @192.168.0.4  (5.5.33-ndb-7.2.14, *Nodegroup: 1*)

     [ndb_mgmd(MGM)] 1 node(s)
     id=10   @192.168.0.10  (5.5.33-ndb-7.2.14)

     [mysqld(API)]   2 node(s)
     id=20   @192.168.0.20  (5.5.33-ndb-7.2.14)
     id=21   @192.168.0.21  (5.5.33-ndb-7.2.14)

Step 7: Redistribute cluster data

When a node group is created, existing data and indexes are not
automatically distributed to the new node group's data nodes, as you
can see by issuing the appropriate `REPORT' command in the management
client:

     ndb_mgm> ALL REPORT MEMORY

     Node 1: Data usage is 5%(177 32K pages of total 3200)
     Node 1: Index usage is 0%(108 8K pages of total 12832)
     Node 2: Data usage is 5%(177 32K pages of total 3200)
     Node 2: Index usage is 0%(108 8K pages of total 12832)
     *Node 3: Data usage is 0%(0 32K pages of total 3200)
     Node 3: Index usage is 0%(0 8K pages of total 12832)
     Node 4: Data usage is 0%(0 32K pages of total 3200)
     Node 4: Index usage is 0%(0 8K pages of total 12832)*

By using *Note `ndb_desc': mysql-cluster-programs-ndb-desc. with the
`-p' option, which causes the output to include partitioning
information, you can see that the table still uses only 2 partitions
(in the `Per partition info' section of the output, shown here in bold
text):

     shell> ndb_desc -c 192.168.0.10 -d n ips -p
     -- ips --
     Version: 1
     Fragment type: 9
     K Value: 6
     Min load factor: 78
     Max load factor: 80
     Temporary table: no
     Number of attributes: 6
     Number of primary keys: 1
     Length of frm data: 340
     Row Checksum: 1
     Row GCI: 1
     SingleUserMode: 0
     ForceVarPart: 1
     FragmentCount: 2
     TableStatus: Retrieved
     -- Attributes --
     id Bigint PRIMARY KEY DISTRIBUTION KEY AT=FIXED ST=MEMORY AUTO_INCR
     country_code Char(2;latin1_swedish_ci) NOT NULL AT=FIXED ST=MEMORY
     type Char(4;latin1_swedish_ci) NOT NULL AT=FIXED ST=MEMORY
     ip_address Varchar(15;latin1_swedish_ci) NOT NULL AT=SHORT_VAR ST=MEMORY
     addresses Bigunsigned NULL AT=FIXED ST=MEMORY
     date Bigunsigned NULL AT=FIXED ST=MEMORY

     -- Indexes --
     PRIMARY KEY(id) - UniqueHashIndex
     PRIMARY(id) - OrderedIndex

     *-- Per partition info --
     Partition   Row count   Commit count  Frag fixed memory   Frag varsized memory
     0           26086       26086         1572864             557056
     1           26329       26329         1605632             557056*

     NDBT_ProgramExit: 0 - OK

You can cause the data to be redistributed among all of the data nodes
by performing, for each *Note `NDBCLUSTER': mysql-cluster. table, an
*Note `ALTER ONLINE TABLE ... REORGANIZE PARTITION': alter-table.
statement in the *Note `mysql': mysql. client. After issuing the
statement `ALTER ONLINE TABLE ips REORGANIZE PARTITION', you can see
using *Note `ndb_desc': mysql-cluster-programs-ndb-desc. that the data
for this table is now stored using 4 partitions, as shown here (with
the relevant portions of the output in bold type):

     shell> ndb_desc -c 192.168.0.10 -d n ips -p
     -- ips --
     Version: 16777217
     Fragment type: 9
     K Value: 6
     Min load factor: 78
     Max load factor: 80
     Temporary table: no
     Number of attributes: 6
     Number of primary keys: 1
     Length of frm data: 341
     Row Checksum: 1
     Row GCI: 1
     SingleUserMode: 0
     ForceVarPart: 1
     FragmentCount: 4
     TableStatus: Retrieved
     -- Attributes --
     id Bigint PRIMARY KEY DISTRIBUTION KEY AT=FIXED ST=MEMORY AUTO_INCR
     country_code Char(2;latin1_swedish_ci) NOT NULL AT=FIXED ST=MEMORY
     type Char(4;latin1_swedish_ci) NOT NULL AT=FIXED ST=MEMORY
     ip_address Varchar(15;latin1_swedish_ci) NOT NULL AT=SHORT_VAR ST=MEMORY
     addresses Bigunsigned NULL AT=FIXED ST=MEMORY
     date Bigunsigned NULL AT=FIXED ST=MEMORY

     -- Indexes --
     PRIMARY KEY(id) - UniqueHashIndex
     PRIMARY(id) - OrderedIndex

     *-- Per partition info --
     Partition   Row count   Commit count  Frag fixed memory   Frag varsized memory
     0           12981       52296         1572864             557056
     1           13236       52515         1605632             557056
     2           13105       13105         819200              294912
     3           13093       13093         819200              294912*

     NDBT_ProgramExit: 0 - OK

*Note*:

Normally, *Note `ALTER [ONLINE] TABLE TABLE_NAME REORGANIZE PARTITION':
alter-table. is used with a list of partition identifiers and a set of
partition definitions to create a new partitioning scheme for a table
that has already been explicitly partitioned. Its use here to
redistribute data onto a new MySQL Cluster node group is an exception
in this regard; when used in this way, only the name of the table is
used following the `TABLE' keyword, and no other keywords or
identifiers follow `REORGANIZE PARTITION'.

For more information, see *Note alter-table::.

In addition, for each table, the *Note `ALTER ONLINE TABLE':
alter-table. statement should be followed by an *Note `OPTIMIZE TABLE':
optimize-table. to reclaim wasted space. You can obtain a list of all
*Note `NDBCLUSTER': mysql-cluster. tables using the following query
against the *Note `INFORMATION_SCHEMA.TABLES': tables-table. table:

     SELECT TABLE_SCHEMA, TABLE_NAME
         FROM INFORMATION_SCHEMA.TABLES
         WHERE ENGINE = 'NDBCLUSTER';

*Note*:

The `INFORMATION_SCHEMA.TABLES.ENGINE' value for a MySQL Cluster table
is always *Note `NDBCLUSTER': mysql-cluster, regardless of whether the
`CREATE TABLE' statement used to create the table (or *Note `ALTER
TABLE': alter-table.  statement used to convert an existing table from
a different storage engine) used *Note `NDB': mysql-cluster. or *Note
`NDBCLUSTER': mysql-cluster. in its `ENGINE' option.

You can see after performing these statements in the output of `ALL
REPORT MEMORY' that the data and indexes are now redistributed between
all cluster data nodes, as shown here:

     ndb_mgm> ALL REPORT MEMORY

     Node 1: Data usage is 5%(176 32K pages of total 3200)
     Node 1: Index usage is 0%(76 8K pages of total 12832)
     Node 2: Data usage is 5%(176 32K pages of total 3200)
     Node 2: Index usage is 0%(76 8K pages of total 12832)
     Node 3: Data usage is 2%(80 32K pages of total 3200)
     Node 3: Index usage is 0%(51 8K pages of total 12832)
     Node 4: Data usage is 2%(80 32K pages of total 3200)
     Node 4: Index usage is 0%(50 8K pages of total 12832)

*Note*:

Since only one DDL operation on *Note `NDBCLUSTER': mysql-cluster.
tables can be executed at a time, you must wait for each *Note `ALTER
ONLINE TABLE ... REORGANIZE PARTITION': alter-table. statement to finish
before issuing the next one.

It is not necessary to issue *Note `ALTER ONLINE TABLE ... REORGANIZE
PARTITION': alter-table. statements for *Note `NDBCLUSTER':
mysql-cluster. tables created _after_ the new data nodes have been
added; data added to such tables is distributed among all data nodes
automatically. However, in *Note `NDBCLUSTER': mysql-cluster. tables
that existed _prior to_ the addition of the new nodes, neither existing
nor new data is distributed using the new nodes until these tables have
been reorganized using *Note `ALTER ONLINE TABLE ... REORGANIZE
PARTITION': alter-table.

Alternative procedure, without rolling restart

It is possible to avoid the need for a rolling restart by configuring
the extra data nodes, but not starting them, when first starting the
cluster. We assume, as before, that you wish to start with two data
nodes--nodes 1 and 2--in one node group and later to expand the cluster
to four data nodes, by adding a second node group consisting of nodes 3
and 4:

     [ndbd default]
     DataMemory = 100M
     IndexMemory = 100M
     NoOfReplicas = 2
     DataDir = /usr/local/mysql/var/mysql-cluster

     [ndbd]
     Id = 1
     HostName = 192.168.0.1

     [ndbd]
     Id = 2
     HostName = 192.168.0.2

     [ndbd]
     Id = 3
     HostName = 192.168.0.3
     Nodegroup = 65536

     [ndbd]
     Id = 4
     HostName = 192.168.0.4
     Nodegroup = 65536

     [mgm]
     HostName = 192.168.0.10
     Id = 10

     [api]
     Id=20
     HostName = 192.168.0.20

     [api]
     Id=21
     HostName = 192.168.0.21

*Note*:

In MySQL Cluster NDB 7.2, it is no longer necessary to perform the
initial start of the cluster using `--nowait-nodes' option with *Note
`ndbd': mysql-cluster-programs-ndbd. or *Note `ndbmtd':
mysql-cluster-programs-ndbmtd. as it was in some earlier versions of
MySQL Cluster.

The data nodes to be brought online at a later time (nodes 3 and 4) can
be configured with `NodeGroup = 65536', in which case nodes 1 and 2 can
each be started as shown here:

     shell> ndbd -c 192.168.0.10 --initial

The data nodes configured with `NodeGroup = 65536' are treated by the
management server as though you had started nodes 1 and 2 using
`--nowait-nodes=3,4' after waiting for a period of time determined by
the setting for the `StartNoNodeGroupTimeout' data node configuration
parameter. By default, this is 15 seconds (15000 milliseconds).

*Note*:

`StartNoNodegroupTimeout' must be the same for all data nodes in the
cluster; for this reason, you should always set it in the `[ndbd
default]' section of the `config.ini' file, rather than for individual
data nodes.

When you are ready to add the second node group, you need only perform
the following additional steps:

  1. Start data nodes 3 and 4, invoking the data node process once for
     each new node:

          shell> ndbd -c 192.168.0.10 --initial

  2. Issue the appropriate `CREATE NODEGROUP' command in the management
     client:

          ndb_mgm> CREATE NODEGROUP 3,4

  3. In the *Note `mysql': mysql. client, issue *Note `ALTER ONLINE
     TABLE ... REORGANIZE PARTITION': alter-table. and *Note `OPTIMIZE
     TABLE': optimize-table. statements for each existing *Note
     `NDBCLUSTER': mysql-cluster. table.  (As noted elsewhere in this
     section, existing MySQL Cluster tables cannot use the new nodes
     for data distribution until this has been done.)


File: manual.info,  Node: mysql-cluster-privilege-distribution,  Next: mysql-cluster-ndb-api-statistics,  Prev: mysql-cluster-online-add-node,  Up: mysql-cluster-management

17.5.14 Distributed MySQL Privileges for MySQL Cluster
------------------------------------------------------

MySQL Cluster NDB 7.2 introduces support for distributing MySQL users
and privileges across all SQL nodes in a MySQL Cluster. This support is
not enabled by default; you should follow the procedure outlined in
this section in order to do so.

Normally, each MySQL server's user privilege tables in the `mysql'
database must use the *Note `MyISAM': myisam-storage-engine. storage
engine, which means that a user account and its associated privileges
created on one SQL node are not available on the cluster's other SQL
nodes.  In MySQL Cluster NDB 7.2 and later, an SQL file
`ndb_dist_priv.sql' is provided with the MySQL Cluster distribution.
This file can be found in the `share' directory in the MySQL
installation directory.

The first step in enabling distributed privileges is to load this
script into a MySQL Server that functions as an SQL node (which we
refer to after this as the _target_ SQL node or MySQL Server). You can
do this by executing the following command from the system shell on the
target SQL node after changing to its MySQL installation directory
(where OPTIONS stands for any additional options needed to connect to
this SQL node):

     shell> mysql OPTIONS -uroot < share/ndb_dist_priv.sql

Importing `ndb_dist_priv.sql' creates a number of stored routines (six
stored procedures and one stored function) in the `mysql' database on
the target SQL node.  After connecting to the SQL node in the *Note
`mysql': mysql.  client (as the MySQL `root' user), you can verify that
these were created as shown here:

     mysql> SELECT ROUTINE_NAME, ROUTINE_SCHEMA, ROUTINE_TYPE
         ->     FROM INFORMATION_SCHEMA.ROUTINES
         ->     WHERE ROUTINE_NAME LIKE 'mysql_cluster%'
         ->     ORDER BY ROUTINE_TYPE;
     +---------------------------------------------+----------------+--------------+
     | ROUTINE_NAME                                | ROUTINE_SCHEMA | ROUTINE_TYPE |
     +---------------------------------------------+----------------+--------------+
     | mysql_cluster_privileges_are_distributed    | mysql          | FUNCTION     |
     | mysql_cluster_backup_privileges             | mysql          | PROCEDURE    |
     | mysql_cluster_move_grant_tables             | mysql          | PROCEDURE    |
     | mysql_cluster_move_privileges               | mysql          | PROCEDURE    |
     | mysql_cluster_restore_local_privileges      | mysql          | PROCEDURE    |
     | mysql_cluster_restore_privileges            | mysql          | PROCEDURE    |
     | mysql_cluster_restore_privileges_from_local | mysql          | PROCEDURE    |
     +---------------------------------------------+----------------+--------------+

     7 rows in set (0.01 sec)

The stored procedure named `mysql_cluster_move_privileges' creates
backup copies of the existing privilege tables, then converts them to
*Note `NDB': mysql-cluster. Two sets of copies are created in the
`mysql' database:

   * A set of local copies that use the *Note `MyISAM':
     myisam-storage-engine. storage engine, and named by adding the
     suffix `_backup' to the original privilege table names.

   * A set of distributed copies (using *Note `NDBCLUSTER':
     mysql-cluster.). These tables are named by prefixing `ndb_' and
     appending `_backup' to the names of the original tables.

Although the original privilege tables are backed up automatically, it
is always a good idea to create backups manually of the existing
privilege tables on all affected SQL nodes before proceeding. You can
do this using *Note `mysqldump': mysqldump. in a manner similar to what
is shown here:

     shell> mysqldump OPTIONS -uroot \
         mysql host user db tables_priv columns_priv procs_priv proxies_priv > BACKUP_FILE

To perform the conversion, you must be connected to the target SQL node
using the *Note `mysql': mysql. client (again, as the MySQL `root'
user). Invoke the stored procedure like this:

     mysql> CALL mysql.mysql_cluster_move_privileges();
     Query OK, 0 rows affected (22.32 sec)

Depending on the number of rows in the privilege tables, this procedure
may take some time to execute. If some of the privilege tables are
empty, you may see one or more `No data - zero rows fetched, selected,
or processed' warnings when `mysql_cluster_move_privileges' returns. In
such cases, the warnings may be safely ignored. To verify that the
conversion was successful, you can use the stored function
`mysql_cluster_privileges_are_distributed' as shown here:

     mysql> SELECT CONCAT(
         ->    'Conversion ',
         ->    IF(mysql.mysql_cluster_privileges_are_distributed(), 'succeeded', 'failed'),
         ->    '.')
         ->    AS Result;
     +-----------------------+
     | Result                |
     +-----------------------+
     | Conversion succeeded. |
     +-----------------------+
     1 row in set (0.00 sec)

`mysql_cluster_privileges_are_distributed' checks for the existence of
the distributed privilege tables and returns `1' if all of the
privilege tables are distributed; otherwise, it returns `0'.

You can verify that the backups have been created using a query such as
this one:

     mysql> SELECT TABLE_NAME, ENGINE FROM INFORMATION_SCHEMA.TABLES
         ->     WHERE TABLE_SCHEMA = 'mysql' AND TABLE_NAME LIKE '%backup'
         ->     ORDER BY ENGINE;
     +-------------------------+------------+
     | TABLE_NAME              | ENGINE     |
     +-------------------------+------------+
     | host_backup             | MyISAM     |
     | db_backup               | MyISAM     |
     | columns_priv_backup     | MyISAM     |
     | user_backup             | MyISAM     |
     | tables_priv_backup      | MyISAM     |
     | proxies_priv_backup     | MyISAM     |
     | procs_priv_backup       | MyISAM     |
     | ndb_user_backup         | ndbcluster |
     | ndb_tables_priv_backup  | ndbcluster |
     | ndb_proxies_priv_backup | ndbcluster |
     | ndb_procs_priv_backup   | ndbcluster |
     | ndb_host_backup         | ndbcluster |
     | ndb_db_backup           | ndbcluster |
     | ndb_columns_priv_backup | ndbcluster |
     +-------------------------+------------+
     14 rows in set (0.00 sec)

Once the conversion to distributed privileges has been made, any time a
MySQL user account is created, dropped, or has its privileges updated
on any SQL node, the changes take effect immediately on all other MySQL
servers attached to the cluster.  Once privileges are distributed, any
new MySQL Servers that connect to the cluster automatically participate
in the distribution.

*Note*:

Formerly, after `mysql_cluster_move_privileges' was executed, you
sometimes needed to execute *Note `FLUSH PRIVILEGES': flush. on those
SQL nodes, or to disconnect and then reconnect the clients, in order
for those clients to be able to see the changes in privileges. In MySQL
Cluster NDB 7.2.4 and later, this is no longer necessary, as SQL nodes
automatically execute a *Note `FLUSH PRIVILEGES': flush. statement when
joining a MySQL Cluster where distributed privileges are in use.

All MySQL user privileges are distributed across all connected MySQL
Servers. This includes privileges associated with views and stored
routines. While automatic distribution of views and stored routines is
not currently supported, you can attempt to distribute stored routines
by issuing a statement such as *Note `ALTER TABLE mysql.proc ENGINE =
NDB': alter-table, but you must verify manually that any tables
referenced by the stored routines exist on all SQL nodes, since MySQL
Cluster has no support at the present time for doing this
automatically. There is currently no way to distribute views among
MySQL Cluster SQL nodes, other than by creating them manually on each
SQL node. If you do this, you must make certain that all base tables
referenced by the views use the *Note `NDB': mysql-cluster. storage
engine; otherwise, the views are likely to diverge very quickly.

In the event that an SQL node becomes disconnected from the cluster
while `mysql_cluster_move_privileges' is running, you must drop its
privilege tables after reconnecting to the cluster, using a statement
such as *Note `DROP TABLE IF EXISTS mysql.user mysql.db
mysql.tables_priv mysql.columns_priv mysql.procs_priv': drop-table.
This causes the SQL node to use the shared privilege tables rather than
its own local versions of them. This is not needed when connecting a
new SQL node to the cluster for the first time.

In the event of an initial restart of the entire cluster (all data
nodes shut down, then started again with `--initial'), the shared
privilege tables are lost. If this happens, you can restore them using
the original target SQL node either from the backups made by
`mysql_cluster_move_privileges' or from a dump file created with *Note
`mysqldump': mysqldump. If you need to use a new MySQL Server to
perform the restoration, you should start it with `--skip-grant-tables'
when connecting to the cluster for the first time; after this, you can
restore the privilege tables locally, then distribute them again using
`mysql_cluster_move_privileges'. After restoring and distributing the
tables, you should restart this MySQL Server without the
`--skip-grant-tables' option.

You can also restore the distributed tables using *Note `ndb_restore':
mysql-cluster-programs-ndb-restore.  `--restore-privilege-tables' from
a backup made using `START BACKUP' in the *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm. client. (The *Note `MyISAM':
myisam-storage-engine. tables created by
`mysql_cluster_move_privileges' are not backed up by the `START BACKUP'
command.)  *Note `ndb_restore': mysql-cluster-programs-ndb-restore.
does not restore the privilege tables by default; the
`--restore-privilege-tables' option causes it to do so.

*Important*:

Applications that access MySQL Cluster data directly, including NDB API
and ClusterJ applications, are not subject to the MySQL privilege
system. This means that, once you have distributed the grant tables,
they can be freely accessed by such applications, just as they can any
other *Note `NDB': mysql-cluster.  tables. In particular, you should
keep in mind that _NDB API and ClusterJ applications can read and write
user names, host names, password hashes, and any other contents of the
distributed grant tables without any restrictions_.


File: manual.info,  Node: mysql-cluster-ndb-api-statistics,  Prev: mysql-cluster-privilege-distribution,  Up: mysql-cluster-management

17.5.15 NDB API Statistics Counters and Variables
-------------------------------------------------

A number of types of statistical counters relating to actions performed
by or affecting `Ndb' (http://dev.mysql.com/doc/ndbapi/en/ndb-ndb.html)
objects are available. Such actions include starting and closing (or
aborting) transactions; primary key and unique key operations; table,
range, and pruned scans; threads blocked while waiting for the
completion of various operations; and data and events sent and received
by `NDBCLUSTER'. The counters are incremented inside the NDB kernel
whenever NDB API calls are made or data is sent to or received by the
data nodes.  *Note `mysqld': mysqld. exposes these counters as system
status variables; their values can be read in the output of *Note `SHOW
STATUS': show-status, or by querying the *Note
`INFORMATION_SCHEMA.SESSION_STATUS': status-table.  or *Note
`INFORMATION_SCHEMA.GLOBAL_STATUS': status-table.  table. By comparing
the values before and after statements operating on *Note `NDB':
mysql-cluster. tables, you can observe the corresponding actions taken
on the API level, and thus the cost of performing the statement.

You can list all of these status variables using the following *Note
`SHOW STATUS': show-status. statement:

     mysql> SHOW STATUS LIKE 'ndb_api%';
     +--------------------------------------------+----------+
     | Variable_name                              | Value    |
     +--------------------------------------------+----------+
     | Ndb_api_wait_exec_complete_count_session   | 0        |
     | Ndb_api_wait_scan_result_count_session     | 0        |
     | Ndb_api_wait_meta_request_count_session    | 0        |
     | Ndb_api_wait_nanos_count_session           | 0        |
     | Ndb_api_bytes_sent_count_session           | 0        |
     | Ndb_api_bytes_received_count_session       | 0        |
     | Ndb_api_trans_start_count_session          | 0        |
     | Ndb_api_trans_commit_count_session         | 0        |
     | Ndb_api_trans_abort_count_session          | 0        |
     | Ndb_api_trans_close_count_session          | 0        |
     | Ndb_api_pk_op_count_session                | 0        |
     | Ndb_api_uk_op_count_session                | 0        |
     | Ndb_api_table_scan_count_session           | 0        |
     | Ndb_api_range_scan_count_session           | 0        |
     | Ndb_api_pruned_scan_count_session          | 0        |
     | Ndb_api_scan_batch_count_session           | 0        |
     | Ndb_api_read_row_count_session             | 0        |
     | Ndb_api_trans_local_read_row_count_session | 0        |
     | Ndb_api_event_data_count_injector          | 0        |
     | Ndb_api_event_nondata_count_injector       | 0        |
     | Ndb_api_event_bytes_count_injector         | 0        |
     | Ndb_api_wait_exec_complete_count_slave     | 0        |
     | Ndb_api_wait_scan_result_count_slave       | 0        |
     | Ndb_api_wait_meta_request_count_slave      | 0        |
     | Ndb_api_wait_nanos_count_slave             | 0        |
     | Ndb_api_bytes_sent_count_slave             | 0        |
     | Ndb_api_bytes_received_count_slave         | 0        |
     | Ndb_api_trans_start_count_slave            | 0        |
     | Ndb_api_trans_commit_count_slave           | 0        |
     | Ndb_api_trans_abort_count_slave            | 0        |
     | Ndb_api_trans_close_count_slave            | 0        |
     | Ndb_api_pk_op_count_slave                  | 0        |
     | Ndb_api_uk_op_count_slave                  | 0        |
     | Ndb_api_table_scan_count_slave             | 0        |
     | Ndb_api_range_scan_count_slave             | 0        |
     | Ndb_api_pruned_scan_count_slave            | 0        |
     | Ndb_api_scan_batch_count_slave             | 0        |
     | Ndb_api_read_row_count_slave               | 0        |
     | Ndb_api_trans_local_read_row_count_slave   | 0        |
     | Ndb_api_wait_exec_complete_count           | 2        |
     | Ndb_api_wait_scan_result_count             | 3        |
     | Ndb_api_wait_meta_request_count            | 27       |
     | Ndb_api_wait_nanos_count                   | 45612023 |
     | Ndb_api_bytes_sent_count                   | 992      |
     | Ndb_api_bytes_received_count               | 9640     |
     | Ndb_api_trans_start_count                  | 2        |
     | Ndb_api_trans_commit_count                 | 1        |
     | Ndb_api_trans_abort_count                  | 0        |
     | Ndb_api_trans_close_count                  | 2        |
     | Ndb_api_pk_op_count                        | 1        |
     | Ndb_api_uk_op_count                        | 0        |
     | Ndb_api_table_scan_count                   | 1        |
     | Ndb_api_range_scan_count                   | 0        |
     | Ndb_api_pruned_scan_count                  | 0        |
     | Ndb_api_scan_batch_count                   | 0        |
     | Ndb_api_read_row_count                     | 1        |
     | Ndb_api_trans_local_read_row_count         | 1        |
     | Ndb_api_event_data_count                   | 0        |
     | Ndb_api_event_nondata_count                | 0        |
     | Ndb_api_event_bytes_count                  | 0        |
     +--------------------------------------------+----------+
     60 rows in set (0.02 sec)

These status variables are also available from the *Note
`SESSION_STATUS': status-table. and *Note `GLOBAL_STATUS': status-table.
tables of the `INFORMATION_SCHEMA' database, as shown here:

     mysql> SELECT * FROM INFORMATION_SCHEMA.SESSION_STATUS
         ->   WHERE VARIABLE_NAME LIKE 'ndb_api%';
     +--------------------------------------------+----------------+
     | VARIABLE_NAME                              | VARIABLE_VALUE |
     +--------------------------------------------+----------------+
     | NDB_API_WAIT_EXEC_COMPLETE_COUNT_SESSION   | 2              |
     | NDB_API_WAIT_SCAN_RESULT_COUNT_SESSION     | 0              |
     | NDB_API_WAIT_META_REQUEST_COUNT_SESSION    | 1              |
     | NDB_API_WAIT_NANOS_COUNT_SESSION           | 8144375        |
     | NDB_API_BYTES_SENT_COUNT_SESSION           | 68             |
     | NDB_API_BYTES_RECEIVED_COUNT_SESSION       | 84             |
     | NDB_API_TRANS_START_COUNT_SESSION          | 1              |
     | NDB_API_TRANS_COMMIT_COUNT_SESSION         | 1              |
     | NDB_API_TRANS_ABORT_COUNT_SESSION          | 0              |
     | NDB_API_TRANS_CLOSE_COUNT_SESSION          | 1              |
     | NDB_API_PK_OP_COUNT_SESSION                | 1              |
     | NDB_API_UK_OP_COUNT_SESSION                | 0              |
     | NDB_API_TABLE_SCAN_COUNT_SESSION           | 0              |
     | NDB_API_RANGE_SCAN_COUNT_SESSION           | 0              |
     | NDB_API_PRUNED_SCAN_COUNT_SESSION          | 0              |
     | NDB_API_SCAN_BATCH_COUNT_SESSION           | 0              |
     | NDB_API_READ_ROW_COUNT_SESSION             | 1              |
     | NDB_API_TRANS_LOCAL_READ_ROW_COUNT_SESSION | 1              |
     | NDB_API_EVENT_DATA_COUNT_INJECTOR          | 0              |
     | NDB_API_EVENT_NONDATA_COUNT_INJECTOR       | 0              |
     | NDB_API_EVENT_BYTES_COUNT_INJECTOR         | 0              |
     | NDB_API_WAIT_EXEC_COMPLETE_COUNT_SLAVE     | 0              |
     | NDB_API_WAIT_SCAN_RESULT_COUNT_SLAVE       | 0              |
     | NDB_API_WAIT_META_REQUEST_COUNT_SLAVE      | 0              |
     | NDB_API_WAIT_NANOS_COUNT_SLAVE             | 0              |
     | NDB_API_BYTES_SENT_COUNT_SLAVE             | 0              |
     | NDB_API_BYTES_RECEIVED_COUNT_SLAVE         | 0              |
     | NDB_API_TRANS_START_COUNT_SLAVE            | 0              |
     | NDB_API_TRANS_COMMIT_COUNT_SLAVE           | 0              |
     | NDB_API_TRANS_ABORT_COUNT_SLAVE            | 0              |
     | NDB_API_TRANS_CLOSE_COUNT_SLAVE            | 0              |
     | NDB_API_PK_OP_COUNT_SLAVE                  | 0              |
     | NDB_API_UK_OP_COUNT_SLAVE                  | 0              |
     | NDB_API_TABLE_SCAN_COUNT_SLAVE             | 0              |
     | NDB_API_RANGE_SCAN_COUNT_SLAVE             | 0              |
     | NDB_API_PRUNED_SCAN_COUNT_SLAVE            | 0              |
     | NDB_API_SCAN_BATCH_COUNT_SLAVE             | 0              |
     | NDB_API_READ_ROW_COUNT_SLAVE               | 0              |
     | NDB_API_TRANS_LOCAL_READ_ROW_COUNT_SLAVE   | 0              |
     | NDB_API_WAIT_EXEC_COMPLETE_COUNT           | 4              |
     | NDB_API_WAIT_SCAN_RESULT_COUNT             | 3              |
     | NDB_API_WAIT_META_REQUEST_COUNT            | 28             |
     | NDB_API_WAIT_NANOS_COUNT                   | 53756398       |
     | NDB_API_BYTES_SENT_COUNT                   | 1060           |
     | NDB_API_BYTES_RECEIVED_COUNT               | 9724           |
     | NDB_API_TRANS_START_COUNT                  | 3              |
     | NDB_API_TRANS_COMMIT_COUNT                 | 2              |
     | NDB_API_TRANS_ABORT_COUNT                  | 0              |
     | NDB_API_TRANS_CLOSE_COUNT                  | 3              |
     | NDB_API_PK_OP_COUNT                        | 2              |
     | NDB_API_UK_OP_COUNT                        | 0              |
     | NDB_API_TABLE_SCAN_COUNT                   | 1              |
     | NDB_API_RANGE_SCAN_COUNT                   | 0              |
     | NDB_API_PRUNED_SCAN_COUNT                  | 0              |
     | NDB_API_SCAN_BATCH_COUNT                   | 0              |
     | NDB_API_READ_ROW_COUNT                     | 2              |
     | NDB_API_TRANS_LOCAL_READ_ROW_COUNT         | 2              |
     | NDB_API_EVENT_DATA_COUNT                   | 0              |
     | NDB_API_EVENT_NONDATA_COUNT                | 0              |
     | NDB_API_EVENT_BYTES_COUNT                  | 0              |
     +--------------------------------------------+----------------+
     60 rows in set (0.00 sec)

     mysql> SELECT * FROM INFORMATION_SCHEMA.GLOBAL_STATUS
         ->     WHERE VARIABLE_NAME LIKE 'ndb_api%';
     +--------------------------------------------+----------------+
     | VARIABLE_NAME                              | VARIABLE_VALUE |
     +--------------------------------------------+----------------+
     | NDB_API_WAIT_EXEC_COMPLETE_COUNT_SESSION   | 2              |
     | NDB_API_WAIT_SCAN_RESULT_COUNT_SESSION     | 0              |
     | NDB_API_WAIT_META_REQUEST_COUNT_SESSION    | 1              |
     | NDB_API_WAIT_NANOS_COUNT_SESSION           | 8144375        |
     | NDB_API_BYTES_SENT_COUNT_SESSION           | 68             |
     | NDB_API_BYTES_RECEIVED_COUNT_SESSION       | 84             |
     | NDB_API_TRANS_START_COUNT_SESSION          | 1              |
     | NDB_API_TRANS_COMMIT_COUNT_SESSION         | 1              |
     | NDB_API_TRANS_ABORT_COUNT_SESSION          | 0              |
     | NDB_API_TRANS_CLOSE_COUNT_SESSION          | 1              |
     | NDB_API_PK_OP_COUNT_SESSION                | 1              |
     | NDB_API_UK_OP_COUNT_SESSION                | 0              |
     | NDB_API_TABLE_SCAN_COUNT_SESSION           | 0              |
     | NDB_API_RANGE_SCAN_COUNT_SESSION           | 0              |
     | NDB_API_PRUNED_SCAN_COUNT_SESSION          | 0              |
     | NDB_API_SCAN_BATCH_COUNT_SESSION           | 0              |
     | NDB_API_READ_ROW_COUNT_SESSION             | 1              |
     | NDB_API_TRANS_LOCAL_READ_ROW_COUNT_SESSION | 1              |
     | NDB_API_EVENT_DATA_COUNT_INJECTOR          | 0              |
     | NDB_API_EVENT_NONDATA_COUNT_INJECTOR       | 0              |
     | NDB_API_EVENT_BYTES_COUNT_INJECTOR         | 0              |
     | NDB_API_WAIT_EXEC_COMPLETE_COUNT_SLAVE     | 0              |
     | NDB_API_WAIT_SCAN_RESULT_COUNT_SLAVE       | 0              |
     | NDB_API_WAIT_META_REQUEST_COUNT_SLAVE      | 0              |
     | NDB_API_WAIT_NANOS_COUNT_SLAVE             | 0              |
     | NDB_API_BYTES_SENT_COUNT_SLAVE             | 0              |
     | NDB_API_BYTES_RECEIVED_COUNT_SLAVE         | 0              |
     | NDB_API_TRANS_START_COUNT_SLAVE            | 0              |
     | NDB_API_TRANS_COMMIT_COUNT_SLAVE           | 0              |
     | NDB_API_TRANS_ABORT_COUNT_SLAVE            | 0              |
     | NDB_API_TRANS_CLOSE_COUNT_SLAVE            | 0              |
     | NDB_API_PK_OP_COUNT_SLAVE                  | 0              |
     | NDB_API_UK_OP_COUNT_SLAVE                  | 0              |
     | NDB_API_TABLE_SCAN_COUNT_SLAVE             | 0              |
     | NDB_API_RANGE_SCAN_COUNT_SLAVE             | 0              |
     | NDB_API_PRUNED_SCAN_COUNT_SLAVE            | 0              |
     | NDB_API_SCAN_BATCH_COUNT_SLAVE             | 0              |
     | NDB_API_READ_ROW_COUNT_SLAVE               | 0              |
     | NDB_API_TRANS_LOCAL_READ_ROW_COUNT_SLAVE   | 0              |
     | NDB_API_WAIT_EXEC_COMPLETE_COUNT           | 4              |
     | NDB_API_WAIT_SCAN_RESULT_COUNT             | 3              |
     | NDB_API_WAIT_META_REQUEST_COUNT            | 28             |
     | NDB_API_WAIT_NANOS_COUNT                   | 53756398       |
     | NDB_API_BYTES_SENT_COUNT                   | 1060           |
     | NDB_API_BYTES_RECEIVED_COUNT               | 9724           |
     | NDB_API_TRANS_START_COUNT                  | 3              |
     | NDB_API_TRANS_COMMIT_COUNT                 | 2              |
     | NDB_API_TRANS_ABORT_COUNT                  | 0              |
     | NDB_API_TRANS_CLOSE_COUNT                  | 3              |
     | NDB_API_PK_OP_COUNT                        | 2              |
     | NDB_API_UK_OP_COUNT                        | 0              |
     | NDB_API_TABLE_SCAN_COUNT                   | 1              |
     | NDB_API_RANGE_SCAN_COUNT                   | 0              |
     | NDB_API_PRUNED_SCAN_COUNT                  | 0              |
     | NDB_API_SCAN_BATCH_COUNT                   | 0              |
     | NDB_API_READ_ROW_COUNT                     | 2              |
     | NDB_API_TRANS_LOCAL_READ_ROW_COUNT         | 2              |
     | NDB_API_EVENT_DATA_COUNT                   | 0              |
     | NDB_API_EVENT_NONDATA_COUNT                | 0              |
     | NDB_API_EVENT_BYTES_COUNT                  | 0              |
     +--------------------------------------------+----------------+
     60 rows in set (0.00 sec)

Each `Ndb' (http://dev.mysql.com/doc/ndbapi/en/ndb-ndb.html) object has
its own counters. NDB API applications can read the values of the
counters for use in optimization or monitoring. For multi-threaded
clients which use more than one `Ndb'
(http://dev.mysql.com/doc/ndbapi/en/ndb-ndb.html) object concurrently,
it is also possible to obtain a summed view of counters from all `Ndb'
(http://dev.mysql.com/doc/ndbapi/en/ndb-ndb.html) objects belonging to
a given `Ndb_cluster_connection'
(http://dev.mysql.com/doc/ndbapi/en/ndb-ndb-cluster-connection.html).

Four sets of these counters are exposed. One set applies to the current
session only; the other 3 are global. _This is in spite of the fact
that their values can be obtained as either session or global status
variables in the *Note `mysql': mysql.  client_. This means that
specifying the `SESSION' or `GLOBAL' keyword with *Note `SHOW STATUS':
show-status. has no effect on the values reported for NDB API
statistics status variables, and the value for each of these variables
is the same whether the value is obtained from the equivalent column of
the *Note `SESSION_STATUS': status-table. or the *Note `GLOBAL_STATUS':
status-table.  table.

   * _Session counters (session specific)_

     Session counters relate to the `Ndb'
     (http://dev.mysql.com/doc/ndbapi/en/ndb-ndb.html) objects in use
     by (only) the current session. Use of such objects by other MySQL
     clients does not influence these counts.

     In order to minimize confusion with standard MySQL session
     variables, we refer to the variables that correspond to these NDB
     API session counters as ``_session' variables', with a leading
     underscore.

   * _Slave counters (global)_

     This set of counters relates to the `Ndb'
     (http://dev.mysql.com/doc/ndbapi/en/ndb-ndb.html) objects used by
     the replication slave SQL thread, if any. If this *Note `mysqld':
     mysqld. does not act as a replication slave, or does not use *Note
     `NDB': mysql-cluster. tables, then all of these counts are 0.

     We refer to the related status variables as ``_slave' variables'
     (with a leading underscore).

   * _Injector counters (global)_

     Injector counters relate to the `Ndb'
     (http://dev.mysql.com/doc/ndbapi/en/ndb-ndb.html) object used to
     listen to cluster events by the binlog injector thread. Even when
     not writing a binary log, *Note `mysqld': mysqld. processes
     attached to a MySQL Cluster continue to listen for some events,
     such as schema changes.

     We refer to the status variables that correspond to NDB API
     injector counters as ``_injector' variables' (with a leading
     underscore).

   * _Server (Global) counters (global)_

     This set of counters relates to all `Ndb'
     (http://dev.mysql.com/doc/ndbapi/en/ndb-ndb.html) objects
     currently used by this *Note `mysqld': mysqld. This includes all
     MySQL client applications, the slave SQL thread (if any), the
     binlog injector, and the *Note `NDB': mysql-cluster. utility
     thread.

     We refer to the status variables that correspond to these counters
     as `global variables' or `*Note `mysqld': mysqld.-level variables'.

You can obtain values for a particular set of variables by additionally
filtering for the substring `session', `slave', or `injector' in the
variable name (along with the common prefix `Ndb_api'). For `_session'
variables, this can be done as shown here:

     mysql> SHOW STATUS LIKE 'ndb_api%session';
     +--------------------------------------------+---------+
     | Variable_name                              | Value   |
     +--------------------------------------------+---------+
     | Ndb_api_wait_exec_complete_count_session   | 2       |
     | Ndb_api_wait_scan_result_count_session     | 0       |
     | Ndb_api_wait_meta_request_count_session    | 1       |
     | Ndb_api_wait_nanos_count_session           | 8144375 |
     | Ndb_api_bytes_sent_count_session           | 68      |
     | Ndb_api_bytes_received_count_session       | 84      |
     | Ndb_api_trans_start_count_session          | 1       |
     | Ndb_api_trans_commit_count_session         | 1       |
     | Ndb_api_trans_abort_count_session          | 0       |
     | Ndb_api_trans_close_count_session          | 1       |
     | Ndb_api_pk_op_count_session                | 1       |
     | Ndb_api_uk_op_count_session                | 0       |
     | Ndb_api_table_scan_count_session           | 0       |
     | Ndb_api_range_scan_count_session           | 0       |
     | Ndb_api_pruned_scan_count_session          | 0       |
     | Ndb_api_scan_batch_count_session           | 0       |
     | Ndb_api_read_row_count_session             | 1       |
     | Ndb_api_trans_local_read_row_count_session | 1       |
     +--------------------------------------------+---------+
     18 rows in set (0.50 sec)

To obtain a listing of the NDB API *Note `mysqld': mysqld.-level status
variables, filter for variable names beginning with `ndb_api' and
ending in `_count', like this:

     mysql> SELECT * FROM INFORMATION_SCHEMA.SESSION_STATUS
         ->     WHERE VARIABLE_NAME LIKE 'ndb_api%count';
     +------------------------------------+----------------+
     | VARIABLE_NAME                      | VARIABLE_VALUE |
     +------------------------------------+----------------+
     | NDB_API_WAIT_EXEC_COMPLETE_COUNT   | 4              |
     | NDB_API_WAIT_SCAN_RESULT_COUNT     | 3              |
     | NDB_API_WAIT_META_REQUEST_COUNT    | 28             |
     | NDB_API_WAIT_NANOS_COUNT           | 53756398       |
     | NDB_API_BYTES_SENT_COUNT           | 1060           |
     | NDB_API_BYTES_RECEIVED_COUNT       | 9724           |
     | NDB_API_TRANS_START_COUNT          | 3              |
     | NDB_API_TRANS_COMMIT_COUNT         | 2              |
     | NDB_API_TRANS_ABORT_COUNT          | 0              |
     | NDB_API_TRANS_CLOSE_COUNT          | 3              |
     | NDB_API_PK_OP_COUNT                | 2              |
     | NDB_API_UK_OP_COUNT                | 0              |
     | NDB_API_TABLE_SCAN_COUNT           | 1              |
     | NDB_API_RANGE_SCAN_COUNT           | 0              |
     | NDB_API_PRUNED_SCAN_COUNT          | 0              |
     | NDB_API_SCAN_BATCH_COUNT           | 0              |
     | NDB_API_READ_ROW_COUNT             | 2              |
     | NDB_API_TRANS_LOCAL_READ_ROW_COUNT | 2              |
     | NDB_API_EVENT_DATA_COUNT           | 0              |
     | NDB_API_EVENT_NONDATA_COUNT        | 0              |
     | NDB_API_EVENT_BYTES_COUNT          | 0              |
     +------------------------------------+----------------+
     21 rows in set (0.09 sec)

Not all counters are reflected in all 4 sets of status variables.  For
the event counters `DataEventsRecvdCount', `NondataEventsRecvdCount',
and `EventBytesRecvdCount', only `_injector' and *Note `mysqld':
mysqld.-level NDB API status variables are available:

     mysql> SHOW STATUS LIKE 'ndb_api%event%';
     +--------------------------------------+-------+
     | Variable_name                        | Value |
     +--------------------------------------+-------+
     | Ndb_api_event_data_count_injector    | 0     |
     | Ndb_api_event_nondata_count_injector | 0     |
     | Ndb_api_event_bytes_count_injector   | 0     |
     | Ndb_api_event_data_count             | 0     |
     | Ndb_api_event_nondata_count          | 0     |
     | Ndb_api_event_bytes_count            | 0     |
     +--------------------------------------+-------+
     6 rows in set (0.00 sec)

`_injector' status variables are not implemented for any other NDB API
counters, as shown here:

     mysql> SHOW STATUS LIKE 'ndb_api%injector%';
     +--------------------------------------+-------+
     | Variable_name                        | Value |
     +--------------------------------------+-------+
     | Ndb_api_event_data_count_injector    | 0     |
     | Ndb_api_event_nondata_count_injector | 0     |
     | Ndb_api_event_bytes_count_injector   | 0     |
     +--------------------------------------+-------+
     3 rows in set (0.00 sec)

The names of the status variables can easily be associated with the
names of the corresponding counters. Each NDB API statistics counter is
listed in the following table with a description as well as the names
of any MySQL server status variables corresponding to this counter.

The first column of this table lists NDB API statistics counter names.
The second column, the rows of which are split into two cells, provides
a description of statistics counter in the first cell, followed by a
list of corresponding MySQL server status variables in the second cell.
Status variables are listed by type in the following order: Session,
Slave, Injector, Server.

Counter Name              Description
Status Variables (by      
statistic type):          
                          
   * Session              
                          
   * Slave                
                          
   * Injector             
                          
   * Server               
`WaitExecCompleteCount'   Number of times thread has been blocked while
                          waiting for execution of an operation to
                          complete. Includes all `execute()'
                          (http://dev.mysql.com/doc/ndbapi/en/ndb-ndbtransaction-methods.html#ndb-ndbtransaction-execute)
                          calls as well as implicit executes for blob
                          operations and auto-increment not visible to
                          clients.
   *                      
     `Ndb_api_wait_exec_complete_count_session'
                          
   *                      
     `Ndb_api_wait_exec_complete_count_slave'
                          
   * [none]               
                          
   *                      
     `Ndb_api_wait_exec_complete_count'
`WaitScanResultCount'     Number of times thread has been blocked while
                          waiting for a scan-based signal, such waiting
                          for additional results, or for a scan to close.
   *                      
     `Ndb_api_wait_scan_result_count_session'
                          
   *                      
     `Ndb_api_wait_scan_result_count_slave'
                          
   * [none]               
                          
   *                      
     `Ndb_api_wait_scan_result_count'
`WaitMetaRequestCount'    Number of times thread has been blocked
                          waiting for a metadata-based signal; this can
                          occur when waiting for a DDL operation or for
                          an epoch to be started (or ended).
   *                      
     `Ndb_api_wait_meta_request_count_session'
                          
   *                      
     `Ndb_api_wait_meta_request_count_slave'
                          
   * [none]               
                          
   *                      
     `Ndb_api_wait_meta_request_count'
`WaitNanosCount'          Total time (in nanoseconds) spent waiting for
                          some type of signal from the data nodes.
   *                      
     `Ndb_api_wait_nanos_count_session'
                          
   *                      
     `Ndb_api_wait_nanos_count_slave'
                          
   * [none]               
                          
   *                      
     `Ndb_api_wait_nanos_count'
`BytesSentCount'          Amount of data (in bytes) sent to the data
                          nodes
   *                      
     `Ndb_api_bytes_sent_count_session'
                          
   *                      
     `Ndb_api_bytes_sent_count_slave'
                          
   * [none]               
                          
   *                      
     `Ndb_api_bytes_sent_count'
`BytesRecvdCount'         Amount of data (in bytes) received from the
                          data nodes
   *                      
     `Ndb_api_bytes_received_count_session'
                          
   *                      
     `Ndb_api_bytes_received_count_slave'
                          
   * [none]               
                          
   *                      
     `Ndb_api_bytes_received_count'
`TransStartCount'         Number of transactions started.
   *                      
     `Ndb_api_trans_start_count_session'
                          
   *                      
     `Ndb_api_trans_start_count_slave'
                          
   * [none]               
                          
   *                      
     `Ndb_api_trans_start_count'
`TransCommitCount'        Number of transactions committed.
   *                      
     `Ndb_api_trans_commit_count_session'
                          
   *                      
     `Ndb_api_trans_commit_count_slave'
                          
   * [none]               
                          
   *                      
     `Ndb_api_trans_commit_count'
`TransAbortCount'         Number of transactions aborted.
   *                      
     `Ndb_api_trans_abort_count_session'
                          
   *                      
     `Ndb_api_trans_abort_count_slave'
                          
   * [none]               
                          
   *                      
     `Ndb_api_trans_abort_count'
`TransCloseCount'         Number of transactions aborted. (This value
                          may be greater than the sum of
                          `TransCommitCount' and `TransAbortCount'.)
   *                      
     `Ndb_api_trans_close_count_session'
                          
   *                      
     `Ndb_api_trans_close_count_slave'
                          
   * [none]               
                          
   *                      
     `Ndb_api_trans_close_count'
`PkOpCount'               Number of operations based on or using primary
                          keys. This count includes blob-part table
                          operations, implicit unlocking operations, and
                          auto-increment operations, as well as primary
                          key operations normally visible to MySQL
                          clients.
   *                      
     `Ndb_api_pk_op_count_session'
                          
   *                      
     `Ndb_api_pk_op_count_slave'
                          
   * [none]               
                          
   *                      
     `Ndb_api_pk_op_count'
`UkOpCount'               Number of operations based on or using unique
                          keys.
   *                      
     `Ndb_api_uk_op_count_session'
                          
   *                      
     `Ndb_api_uk_op_count_slave'
                          
   * [none]               
                          
   *                      
     `Ndb_api_uk_op_count'
`TableScanCount'          Number of table scans that have been started.
                          This includes scans of internal tables.
   *                      
     `Ndb_api_table_scan_count_session'
                          
   *                      
     `Ndb_api_table_scan_count_slave'
                          
   * [none]               
                          
   *                      
     `Ndb_api_table_scan_count'
`RangeScanCount'          Number of range scans that have been started.
   *                      
     `Ndb_api_range_scan_count_session'
                          
   *                      
     `Ndb_api_range_scan_count_slave'
                          
   * [none]               
                          
   *                      
     `Ndb_api_range_scan_count'
`PrunedScanCount'         Number of scans that have been pruned to a
                          single partition.
   *                      
     `Ndb_api_pruned_scan_count_session'
                          
   *                      
     `Ndb_api_pruned_scan_count_slave'
                          
   * [none]               
                          
   *                      
     `Ndb_api_pruned_scan_count'
`ScanBatchCount'          Number of batches of rows received. (A _batch_
                          in this context is a set of scan results from
                          a single fragment.)
   *                      
     `Ndb_api_scan_batch_count_session'
                          
   *                      
     `Ndb_api_scan_batch_count_slave'
                          
   * [none]               
                          
   *                      
     `Ndb_api_scan_batch_count'
`ReadRowCount'            Total number of rows that have been read.
                          Includes rows read using primary key, unique
                          key, and scan operations.
   *                      
     `Ndb_api_read_row_count_session'
                          
   *                      
     `Ndb_api_read_row_count_slave'
                          
   * [none]               
                          
   *                      
     `Ndb_api_read_row_count'
`TransLocalReadRowCount'  Number of rows read from the data same node on
                          which the transaction was being run.
   *                      
     `Ndb_api_trans_local_read_row_count_session'
                          
   *                      
     `Ndb_api_trans_local_read_row_count_slave'
                          
   * [none]               
                          
   *                      
     `Ndb_api_trans_local_read_row_count'
`DataEventsRecvdCount'    Number of row change events received.
   * [none]               
                          
   * [none]               
                          
   *                      
     `Ndb_api_event_data_count_injector'
                          
   *                      
     `Ndb_api_event_data_count'
`NondataEventsRecvdCount' Number of events received, other than row
                          change events.
   * [none]               
                          
   * [none]               
                          
   *                      
     `Ndb_api_event_nondata_count_injector'
                          
   *                      
     `Ndb_api_event_nondata_count'
`EventBytesRecvdCount'    Number of bytes of events received.
   * [none]               
                          
   * [none]               
                          
   *                      
     `Ndb_api_event_bytes_count_injector'
                          
   *                      
     `Ndb_api_event_bytes_count'
To see all counts of committed transactions--that is, all
`TransCommitCount' counter status variables--you can filter the results
of *Note `SHOW STATUS': show-status. for the substring
`trans_commit_count', like this:

     mysql> SHOW STATUS LIKE '%trans_commit_count%';
     +------------------------------------+-------+
     | Variable_name                      | Value |
     +------------------------------------+-------+
     | Ndb_api_trans_commit_count_session | 1     |
     | Ndb_api_trans_commit_count_slave   | 0     |
     | Ndb_api_trans_commit_count         | 2     |
     +------------------------------------+-------+
     3 rows in set (0.00 sec)

From this you can determine that 1 transaction has been committed in
the current *Note `mysql': mysql. client session, and 2 transactions
have been committed on this *Note `mysqld': mysqld.  since it was last
restarted.

You can see how various NDB API counters are incremented by a given SQL
statement by comparing the values of the corresponding `_session'
status variables immediately before and after performing the statement.
In this example, after getting the initial values from *Note `SHOW
STATUS': show-status, we create in the `test' database an *Note `NDB':
mysql-cluster. table, named `t', that has a single column:

     mysql> SHOW STATUS LIKE 'ndb_api%session%';
     +--------------------------------------------+--------+
     | Variable_name                              | Value  |
     +--------------------------------------------+--------+
     | Ndb_api_wait_exec_complete_count_session   | 2      |
     | Ndb_api_wait_scan_result_count_session     | 0      |
     | Ndb_api_wait_meta_request_count_session    | 3      |
     | Ndb_api_wait_nanos_count_session           | 820705 |
     | Ndb_api_bytes_sent_count_session           | 132    |
     | Ndb_api_bytes_received_count_session       | 372    |
     | Ndb_api_trans_start_count_session          | 1      |
     | Ndb_api_trans_commit_count_session         | 1      |
     | Ndb_api_trans_abort_count_session          | 0      |
     | Ndb_api_trans_close_count_session          | 1      |
     | Ndb_api_pk_op_count_session                | 1      |
     | Ndb_api_uk_op_count_session                | 0      |
     | Ndb_api_table_scan_count_session           | 0      |
     | Ndb_api_range_scan_count_session           | 0      |
     | Ndb_api_pruned_scan_count_session          | 0      |
     | Ndb_api_scan_batch_count_session           | 0      |
     | Ndb_api_read_row_count_session             | 1      |
     | Ndb_api_trans_local_read_row_count_session | 1      |
     +--------------------------------------------+--------+
     18 rows in set (0.00 sec)

     mysql> USE test;
     Database changed
     mysql> CREATE TABLE t (c INT) ENGINE NDBCLUSTER;
     Query OK, 0 rows affected (0.85 sec)

Now you can execute a new *Note `SHOW STATUS': show-status. statement
and observe the changes, as shown here (with the changed rows
highlighted in the output):

     mysql> SHOW STATUS LIKE 'ndb_api%session%';
     +--------------------------------------------+-----------+
     | Variable_name                              | Value     |
     +--------------------------------------------+-----------+_
     | Ndb_api_wait_exec_complete_count_session   | 8         |_
     | Ndb_api_wait_scan_result_count_session     | 0         |
     _| Ndb_api_wait_meta_request_count_session    | 17        |_
     _| Ndb_api_wait_nanos_count_session           | 706871709 |_
     _| Ndb_api_bytes_sent_count_session           | 2376      |_
     _| Ndb_api_bytes_received_count_session       | 3844      |_
     _| Ndb_api_trans_start_count_session          | 4         |_
     _| Ndb_api_trans_commit_count_session         | 4         |_
     | Ndb_api_trans_abort_count_session          | 0         |
     _| Ndb_api_trans_close_count_session          | 4         |_
     _| Ndb_api_pk_op_count_session                | 6         |_
     | Ndb_api_uk_op_count_session                | 0         |
     | Ndb_api_table_scan_count_session           | 0         |
     | Ndb_api_range_scan_count_session           | 0         |
     | Ndb_api_pruned_scan_count_session          | 0         |
     | Ndb_api_scan_batch_count_session           | 0         |
     _| Ndb_api_read_row_count_session             | 2         |_
     | Ndb_api_trans_local_read_row_count_session | 1         |
     +--------------------------------------------+-----------+
     18 rows in set (0.00 sec)

Similarly, you can see the changes in the NDB API statistics counters
caused by inserting a row into `t': Insert the row, then run the same
*Note `SHOW STATUS': show-status. statement used in the previous
example, as shown here:

     mysql> INSERT INTO t VALUES (100);
     Query OK, 1 row affected (0.00 sec)

     mysql> SHOW STATUS LIKE 'ndb_api%session%';
     +--------------------------------------------+-----------+
     | Variable_name                              | Value     |
     +--------------------------------------------+-----------+
     _| Ndb_api_wait_exec_complete_count_session   | 11        |_
     _| Ndb_api_wait_scan_result_count_session     | 6         |_
     _| Ndb_api_wait_meta_request_count_session    | 20        |_
     _| Ndb_api_wait_nanos_count_session           | 707370418 |_
     _| Ndb_api_bytes_sent_count_session           | 2724      |_
     _| Ndb_api_bytes_received_count_session       | 4116      |_
     _| Ndb_api_trans_start_count_session          | 7         |_
     _| Ndb_api_trans_commit_count_session         | 6         |_
     | Ndb_api_trans_abort_count_session          | 0         |
     _| Ndb_api_trans_close_count_session          | 7         |_
     _| Ndb_api_pk_op_count_session                | 8         |_
     | Ndb_api_uk_op_count_session                | 0         |
     _| Ndb_api_table_scan_count_session           | 1         |_
     | Ndb_api_range_scan_count_session           | 0         |
     | Ndb_api_pruned_scan_count_session          | 0         |
     | Ndb_api_scan_batch_count_session           | 0         |
     _| Ndb_api_read_row_count_session             | 3         |_
     _| Ndb_api_trans_local_read_row_count_session | 2         |_
     +--------------------------------------------+-----------+
     18 rows in set (0.00 sec)

We can make a number of observations from these results:

   * Although we created `t' with no explicit primary key, 5 primary
     key operations were performed in doing so (the difference in the
     `before' and `after' values of `Ndb_api_pk_op_count_session', or 6
     minus 1). This reflects the creation of the hidden primary key
     that is a feature of all tables using the *Note `NDB':
     mysql-cluster. storage engine.

   * By comparing successive values for
     `Ndb_api_wait_nanos_count_session', we can see that the NDB API
     operations implementing the *Note `CREATE TABLE': create-table.
     statement waited much longer (706871709 - 820705 = 706051004
     nanoseconds, or approximately 0.7 second) for responses from the
     data nodes than those executed by the *Note `INSERT': insert.
     (707370418 - 706871709 = 498709 ns or roughly .0005 second). The
     execution times reported for these statements in the *Note
     `mysql': mysql.  client correlate roughly with these figures.

     On platforms with without sufficient (nanosecond) time resolution,
     small changes in the value of the `WaitNanosCount' NDB API counter
     due to SQL statements that execute very quickly may not always be
     visible in the values of `Ndb_api_wait_nanos_count_session',
     `Ndb_api_wait_nanos_count_slave', or `Ndb_api_wait_nanos_count'.

   * The *Note `INSERT': insert. statement incremented both the
     `ReadRowCount' and `TransLocalReadRowCount' NDB API statistics
     counters, as reflected by the increased values of
     `Ndb_api_read_row_count_session' and
     `Ndb_api_trans_local_read_row_count_session'.


File: manual.info,  Node: mysql-cluster-replication,  Next: mysql-cluster-news,  Prev: mysql-cluster-management,  Up: mysql-cluster

17.6 MySQL Cluster Replication
==============================

* Menu:

* mysql-cluster-replication-abbreviations::  MySQL Cluster Replication: Abbreviations and Symbols
* mysql-cluster-replication-general::  General Requirements for MySQL Cluster Replication
* mysql-cluster-replication-issues::  Known Issues in MySQL Cluster Replication
* mysql-cluster-replication-schema::  MySQL Cluster Replication Schema and Tables
* mysql-cluster-replication-preparation::  Preparing the MySQL Cluster for Replication
* mysql-cluster-replication-starting::  Starting MySQL Cluster Replication (Single Replication Channel)
* mysql-cluster-replication-two-channels::  Using Two Replication Channels for MySQL Cluster Replication
* mysql-cluster-replication-failover::  Implementing Failover with MySQL Cluster Replication
* mysql-cluster-replication-backups::  MySQL Cluster Backups With MySQL Cluster Replication
* mysql-cluster-replication-multi-master::  MySQL Cluster Replication: Multi-Master and Circular Replication
* mysql-cluster-replication-conflict-resolution::  MySQL Cluster Replication Conflict Resolution

MySQL Cluster supports _asynchronous replication_, more usually
referred to simply as `replication'. This section explains how to set
up and manage a configuration in which one group of computers operating
as a MySQL Cluster replicates to a second computer or group of
computers. We assume some familiarity on the part of the reader with
standard MySQL replication as discussed elsewhere in this Manual.  (See
*Note replication::).

Normal (non-clustered) replication involves a `master' server and a
`slave' server, the master being the source of the operations and data
to be replicated and the slave being the recipient of these. In MySQL
Cluster, replication is conceptually very similar but can be more
complex in practice, as it may be extended to cover a number of
different configurations including replicating between two complete
clusters. Although a MySQL Cluster itself depends on the *Note `NDB':
mysql-cluster.  storage engine for clustering functionality, it is not
necessary to use *Note `NDB': mysql-cluster. as the storage engine for
the slave's copies of the replicated tables (see *Note
mysql-cluster-replication-ndb-non-ndb::). However, for maximum
availability, it is possible (and preferable) to replicate from one
MySQL Cluster to another, and it is this scenario that we discuss, as
shown in the following figure:

MySQL Cluster-to-Cluster Replication Layout

In this scenario, the replication process is one in which successive
states of a master cluster are logged and saved to a slave cluster.
This process is accomplished by a special thread known as the NDB
binlog injector thread, which runs on each MySQL server and produces a
binary log (`binlog'). This thread ensures that all changes in the
cluster producing the binary log--and not just those changes that are
effected through the MySQL Server--are inserted into the binary log
with the correct serialization order. We refer to the MySQL replication
master and replication slave servers as replication servers or
replication nodes, and the data flow or line of communication between
them as a _replication channel_.

For information about performing point-in-time recovery with MySQL
Cluster and MySQL Cluster Replication, see *Note
mysql-cluster-replication-pitr::.

NDB API `_slave' status variables

NDB API counters can provide enhanced monitoring capabilities on MySQL
Cluster replication slaves. These are implemented as NDB statistics
`_slave' status variables, as seen in the output of *Note `SHOW
STATUS': show-status, or in the results of queries against the *Note
`SESSION_STATUS': status-table. or *Note `GLOBAL_STATUS': status-table.
table in a *Note `mysql': mysql. client session connected to a MySQL
Server that is acting as a slave in MySQL Cluster Replication. By
comparing the values of these status variables before and after the
execution of statements affecting replicated *Note `NDB':
mysql-cluster. tables, you can observe the corresponding actions taken
on the NDB API level by the slave, which can be useful when monitoring
or troubleshooting MySQL Cluster Replication.  *Note
mysql-cluster-ndb-api-statistics::, provides additional information.

Replication from `NDB' to non-`NDB' tables

It is possible to replicate *Note `NDB': mysql-cluster.  tables from a
MySQL Cluster acting as the master to tables using other MySQL storage
engines such as *Note `InnoDB': innodb-storage-engine. or *Note
`MyISAM': myisam-storage-engine. on a slave *Note `mysqld': mysqld.
However, because of differences between the version of *Note `mysqld':
mysqld. provided with MySQL Cluster and that included with MySQL Server
5.5, the slave server must also use a *Note `mysqld': mysqld. binary
from the MySQL Cluster distribution. See *Note
mysql-cluster-replication-general::.


File: manual.info,  Node: mysql-cluster-replication-abbreviations,  Next: mysql-cluster-replication-general,  Prev: mysql-cluster-replication,  Up: mysql-cluster-replication

17.6.1 MySQL Cluster Replication: Abbreviations and Symbols
-----------------------------------------------------------

Throughout this section, we use the following abbreviations or symbols
for referring to the master and slave clusters, and to processes and
commands run on the clusters or cluster nodes:

This table lists abbreviations used throughout this section for symbols
referring to master and slave clusters, and to processes and commands
run on the clusters or cluster nodes.

Symbol or          Description (Refers to...)
Abbreviation       
M                  The cluster serving as the (primary) replication
                   master
S                  The cluster acting as the (primary) replication slave
`shellM>'          Shell command to be issued on the master cluster
`mysqlM>'          MySQL client command issued on a single MySQL server
                   running as an SQL node on the master cluster
`mysqlM*>'         MySQL client command to be issued on all SQL nodes
                   participating in the replication master cluster
`shellS>'          Shell command to be issued on the slave cluster
`mysqlS>'          MySQL client command issued on a single MySQL server
                   running as an SQL node on the slave cluster
`mysqlS*>'         MySQL client command to be issued on all SQL nodes
                   participating in the replication slave cluster
C                  Primary replication channel
C'                 Secondary replication channel
M'                 Secondary replication master
S'                 Secondary replication slave


File: manual.info,  Node: mysql-cluster-replication-general,  Next: mysql-cluster-replication-issues,  Prev: mysql-cluster-replication-abbreviations,  Up: mysql-cluster-replication

17.6.2 General Requirements for MySQL Cluster Replication
---------------------------------------------------------

A replication channel requires two MySQL servers acting as replication
servers (one each for the master and slave). For example, this means
that in the case of a replication setup with two replication channels
(to provide an extra channel for redundancy), there will be a total of
four replication nodes, two per cluster.

Replication of a MySQL Cluster as described in this section and those
following is dependent on row-based replication. This means that the
replication master MySQL server must be running with
`--binlog-format=ROW' or `--binlog-format=MIXED', as described in *Note
mysql-cluster-replication-starting::. For general information about
row-based replication, see *Note replication-formats::.

*Important*:

If you attempt to use MySQL Cluster Replication with
`--binlog-format=STATEMENT', replication fails to work properly because
the `ndb_binlog_index' table on the master and the `epoch' column of the
`ndb_apply_status' table on the slave are not updated (see *Note
mysql-cluster-replication-schema::). Instead, only updates on the MySQL
server acting as the replication master propagate to the slave, and no
updates from any other SQL nodes on the master cluster are replicated.

Beginning with MySQL Cluster NDB 7.2.13, the default value for the
`--binlog-format' option is `MIXED'. (Bug #16417224)

In MySQL Cluster NDB 7.2.12 and earlier MySQL Cluster NDB 7.2 releases,
the default for `--binlog-format' was `STATEMENT'; this meant that you
were required to change the binary logging format to `ROW' (or `MIXED')
manually on all MySQL Servers on the master MySQL Cluster, prior to
starting MySQL Cluster replication. If necessary, you can do this on
startup using the `--binlog-format' option, or at runtime by setting
the global `binlog_format' system variable.  Using the startup option
is preferred in such cases.

Each MySQL server used for replication in either cluster must be
uniquely identified among all the MySQL replication servers
participating in either cluster (you cannot have replication servers on
both the master and slave clusters sharing the same ID). This can be
done by starting each SQL node using the `--server-id=ID' option, where
ID is a unique integer. Although it is not strictly necessary, we will
assume for purposes of this discussion that all MySQL Cluster binaries
are of the same release version.

It is generally true in MySQL Replication that both MySQL servers
(*Note `mysqld': mysqld. processes) involved must be compatible with
one another with respect to both the version of the replication
protocol used and the SQL feature sets which they support (see *Note
replication-compatibility::). It is due to such differences between the
binaries in the MySQL Cluster and MySQL Server 5.5 distributions that
MySQL Cluster Replication has the additional requirement that both
*Note `mysqld': mysqld. binaries come from a MySQL Cluster
distribution. The simplest and easiest way to assure that the *Note
`mysqld': mysqld. servers are compatible is to use the same MySQL
Cluster distribution for all master and slave *Note `mysqld': mysqld.
binaries.

We assume that the slave server or cluster is dedicated to replication
of the master, and that no other data is being stored on it.

*Note*:

It is possible to replicate a MySQL Cluster using statement-based
replication. However, in this case, the following restrictions apply:

   * All updates to data rows on the cluster acting as the master must
     be directed to a single MySQL server.

   * It is not possible to replicate a cluster using multiple
     simultaneous MySQL replication processes.

   * Only changes made at the SQL level are replicated.

These are in addition to the other limitations of statement-based
replication as opposed to row-based replication; see *Note
replication-sbr-rbr::, for more specific information concerning the
differences between the two replication formats.


File: manual.info,  Node: mysql-cluster-replication-issues,  Next: mysql-cluster-replication-schema,  Prev: mysql-cluster-replication-general,  Up: mysql-cluster-replication

17.6.3 Known Issues in MySQL Cluster Replication
------------------------------------------------

This section discusses known problems or issues when using replication
with MySQL Cluster NDB 7.2.

Loss of master-slave connection

A loss of connection can occur either between the replication master
SQL node and the replication slave SQL node, or between the replication
master SQL node and the data nodes in the master cluster. In the latter
case, this can occur not only as a result of loss of physical
connection (for example, a broken network cable), but due to the
overflow of data node event buffers; if the SQL node is too slow to
respond, it may be dropped by the cluster (this is controllable to some
degree by adjusting the `MaxBufferedEpochs' and `TimeBetweenEpochs'
configuration parameters). If this occurs, _it is entirely possible for
new data to be inserted into the master cluster without being recorded
in the replication master's binary log_. For this reason, to guarantee
high availability, it is extremely important to maintain a backup
replication channel, to monitor the primary channel, and to fail over
to the secondary replication channel when necessary to keep the slave
cluster synchronized with the master. MySQL Cluster is not designed to
perform such monitoring on its own; for this, an external application
is required.

The replication master issues a `gap' event when connecting or
reconnecting to the master cluster. (A gap event is a type of `incident
event,' which indicates an incident that occurs that affects the
contents of the database but that cannot easily be represented as a set
of changes. Examples of incidents are server crashes, database
resynchronization, (some) software updates, and (some) hardware
changes.) When the slave encounters a gap in the replication log, it
stops with an error message. This message is available in the output of
*Note `SHOW SLAVE STATUS': show-slave-status, and indicates that the
SQL thread has stopped due to an incident registered in the replication
stream, and that manual intervention is required.  See *Note
mysql-cluster-replication-failover::, for more information about what
to do in such circumstances.

*Important*:

Because MySQL Cluster is not designed on its own to monitor replication
status or provide failover, if high availability is a requirement for
the slave server or cluster, then you must set up multiple replication
lines, monitor the master *Note `mysqld': mysqld. on the primary
replication line, and be prepared fail over to a secondary line if and
as necessary.  This must be done manually, or possibly by means of a
third-party application. For information about implementing this type
of setup, see *Note mysql-cluster-replication-two-channels::, and *Note
mysql-cluster-replication-failover::.

However, if you are replicating from a standalone MySQL server to a
MySQL Cluster, one channel is usually sufficient.

Circular replication

MySQL Cluster Replication supports circular replication, as shown in
the next example. The replication setup involves three MySQL Clusters
numbered 1, 2, and 3, in which Cluster 1 acts as the replication master
for Cluster 2, Cluster 2 acts as the master for Cluster 3, and Cluster
3 acts as the master for Cluster 1, thus completing the circle. Each
MySQL Cluster has two SQL nodes, with SQL nodes A and B belonging to
Cluster 1, SQL nodes C and D belonging to Cluster 2, and SQL nodes E
and F belonging to Cluster 3.

Circular replication using these clusters is supported as long as the
following conditions are met:

   * The SQL nodes on all masters and slaves are the same

   * All SQL nodes acting as replication masters and slaves are started
     using the `--log-slave-updates' option

This type of circular replication setup is shown in the following
diagram:

MySQL Cluster circular replication scheme in which all master SQL nodes
are also slaves.

In this scenario, SQL node A in Cluster 1 replicates to SQL node C in
Cluster 2; SQL node C replicates to SQL node E in Cluster 3; SQL node E
replicates to SQL node A. In other words, the replication line
(indicated by the red arrows in the diagram) directly connects all SQL
nodes used as replication masters and slaves.

It should also be possible to set up circular replication in which not
all master SQL nodes are also slaves, as shown here:

MySQL Cluster circular replication scheme in which all master SQL nodes
are not also necessarily slaves.

In this case, different SQL nodes in each cluster are used as
replication masters and slaves. However, you must _not_ start any of
the SQL nodes using `--log-slave-updates'. This type of circular
replication scheme for MySQL Cluster, in which the line of replication
(again indicated by the red arrows in the diagram) is discontinuous,
should be possible, but it should be noted that it has not yet been
thoroughly tested and must therefore still be considered experimental.

*Note*:

The *Note `NDB': mysql-cluster. storage engine uses _idempotent
execution mode_, which suppresses duplicate-key and other errors that
otherwise break circular replication of MySQL Cluster. This is
equivalent to setting the global `slave_exec_mode' system variable to
`IDEMPOTENT'. This is also required for multi-master replication when
using MySQL Cluster. (Bug #31609)

It is not necessary to set `slave_exec_mode' in MySQL Cluster
replication; MySQL Cluster does this automatically for all *Note `NDB':
mysql-cluster. tables and ignores any attempts to set this variable
explicitly.

MySQL Cluster replication and primary keys

In the event of a node failure, errors in replication of *Note `NDB':
mysql-cluster. tables without primary keys can still occur, due to the
possibility of duplicate rows being inserted in such cases. For this
reason, it is highly recommended that all *Note `NDB': mysql-cluster.
tables being replicated have primary keys.

MySQL Cluster Replication and Unique Keys

In older versions of MySQL Cluster, operations that updated values of
unique key columns of *Note `NDB': mysql-cluster.  tables could result
in duplicate-key errors when replicated.  This issue is solved for
replication between *Note `NDB': mysql-cluster. tables by deferring
unique key checks until after all table row updates have been performed.

Deferring constraints in this way is currently supported only by *Note
`NDB': mysql-cluster. Thus, updates of unique keys when replicating
from *Note `NDB': mysql-cluster. to a different storage engine such as
*Note `MyISAM': myisam-storage-engine. or *Note `InnoDB':
innodb-storage-engine. are still not supported.

The problem encountered when replicating without deferred checking of
unique key updates can be illustrated using *Note `NDB': mysql-cluster.
table such as `t', is created and populated on the master (and
replicated to a slave that does not support deferred unique key
updates) as shown here:

     CREATE TABLE t (
         p INT PRIMARY KEY,
         c INT,
         UNIQUE KEY u (c)
     )   ENGINE NDB;

     INSERT INTO t
         VALUES (1,1), (2,2), (3,3), (4,4), (5,5);

The following *Note `UPDATE': update. statement on `t' succeeded on the
master, since the rows affected are processed in the order determined
by the `ORDER BY' option, performed over the entire table:

     UPDATE t SET c = c - 1 ORDER BY p;

However, the same statement failed with a duplicate key error or other
constraint violation on the slave, because the ordering of the row
updates was done for one partition at a time, rather than for the table
as a whole.

*Note*:

Every *Note `NDB': mysql-cluster. table is implicitly partitioned by
key when it is created. See *Note partitioning-key::, for more
information.

Restarting with `--initial'

Restarting the cluster with the `--initial' option causes the sequence
of GCI and epoch numbers to start over from `0'. (This is generally
true of MySQL Cluster and not limited to replication scenarios
involving Cluster.) The MySQL servers involved in replication should in
this case be restarted. After this, you should use the *Note `RESET
MASTER': reset-master. and *Note `RESET SLAVE': reset-slave. statements
to clear the invalid `ndb_binlog_index' and `ndb_apply_status' tables,
respectively.

Replication from `NDB' to other storage engines

It is possible to replicate an *Note `NDB': mysql-cluster.  table on
the master to a table using a different storage engine on the slave,
taking into account the restrictions listed here:

   * Multi-master and circular replication are not supported (tables on
     both the master and the slave must use the *Note `NDB':
     mysql-cluster. storage engine for this to work).

   * Using a storage engine does not perform binary logging for slave
     tables requires special handling.

   * Use of a nontransactional storage engine for slave tables also
     requires special handling.

The next few paragraphs provide additional information about each of
the issues just described.

Multiple masters not supported when replicating `NDB' to other storage
engines

For replication from *Note `NDB': mysql-cluster. to a different storage
engine, the relationship between the two databases must be a simple
master-slave one. This means that circular or master-master replication
is not supported between MySQL Cluster and other storage engines.

In addition, it is not possible to configure more than one replication
channel when replicating between *Note `NDB': mysql-cluster. and a
different storage engine.  (However, a MySQL Cluster database _can_
simultaneously replicate to multiple slave MySQL Cluster databases.) If
the master uses *Note `NDB': mysql-cluster.  tables, it is still
possible to have more than one MySQL Server maintain a binary log of
all changes; however, for the slave to change masters (fail over), the
new master-slave relationship must be explicitly defined on the slave.

Replicating `NDB' to a slave storage engine that does not perform
binary logging

If you attempt to replicate from a MySQL Cluster to a slave that uses a
storage engine that does not handle its own binary logging, the
replication process aborts with the error `Binary logging not possible
... Statement cannot be written atomically since more than one engine
involved and at least one engine is self-logging' (Error 1595). It is
possible to work around this issue in one of the following ways:

   * Turn off binary logging on the slave

     This can be accomplished by setting `sql_log_bin = 0'.

   * Change the storage engine used for the `mysql.ndb_apply_status'
     table

     Causing this table to use an engine that does not handle its own
     binary logging can also eliminate the conflict. This can be done
     by issuing a statement such as *Note `ALTER TABLE
     mysql.ndb_apply_status ENGINE=MyISAM': alter-table. on the slave.
     It is safe to do this when using a non-*Note `NDB': mysql-cluster.
     storage engine on the slave, since you do not then need to worry
     about keeping multiple slave SQL nodes synchronized.

   * Filter out changes to the `mysql.ndb_apply_status' table on the
     slave

     This can be done by starting the slave SQL node with
     `--replicate-ignore-table=mysql.ndb_apply_status'.  If you need
     for other tables to be ignored by replication, you might wish to
     use an appropriate `--replicate-wild-ignore-table' option instead.

*Important*:

You should _not_ disable replication or binary logging of
`mysql.ndb_apply_status' or change the storage engine used for this
table when replicating from one MySQL Cluster to another. See *Note
mysql-cluster-replication-issues-filtering::, for details.

Replication from `NDB' to a nontransactional storage engine

When replicating from *Note `NDB': mysql-cluster. to a nontransactional
storage engine such as *Note `MyISAM': myisam-storage-engine, you may
encounter unnecessary duplicate key errors when replicating *Note
`INSERT ... ON DUPLICATE KEY UPDATE': insert-on-duplicate. statements.
You can suppress these by using `--ndb-log-update-as-write=0', which
forces updates to be logged as writes (rather than as updates).

In addition, when replicating from *Note `NDB': mysql-cluster. to a
storage engine that does not implement transactions, if the slave fails
to apply any row changes from a given transaction, it does not roll
back the rest of the transaction. (This is true when replicating tables
using any transactional storage engine--not only *Note `NDB':
mysql-cluster.--to a nontransactional storage engine.) Because of this,
it cannot be guaranteed that transactional consistency will be
maintained on the slave in such cases.

Replication and binary log filtering rules with replication between
MySQL Clusters

If you are using any of the options `--replicate-do-*',
`--replicate-ignore-*', `--binlog-do-db', or `--binlog-ignore-db' to
filter databases or tables being replicated, care must be taken not to
block replication or binary logging of the `mysql.ndb_apply_status',
which is required for replication between MySQL Clusters to operate
properly. In particular, you must keep in mind the following:

  1. Using `--replicate-do-db=DB_NAME' (and no other `--replicate-do-*'
     or `--replicate-ignore-*' options) means that _only_ tables in
     database DB_NAME are replicated. In this case, you should also use
     `--replicate-do-db=mysql', `--binlog-do-db=mysql', or
     `--replicate-do-table=mysql.ndb_apply_status' to ensure that
     `mysql.ndb_apply_status' is populated on slaves.

     Using `--binlog-do-db=DB_NAME' (and no other `--binlog-do-db'
     options) means that changes _only_ to tables in database DB_NAME
     are written to the binary log. In this case, you should also use
     `--replicate-do-db=mysql', `--binlog-do-db=mysql', or
     `--replicate-do-table=mysql.ndb_apply_status' to ensure that
     `mysql.ndb_apply_status' is populated on slaves.

  2. Using `--replicate-ignore-db=mysql' means that no tables in the
     `mysql' database are replicated. In this case, you should also use
     `--replicate-do-table=mysql.ndb_apply_status' to ensure that
     `mysql.ndb_apply_status' is replicated.

     Using `--binlog-ignore-db=mysql' means that no changes to tables
     in the `mysql' database are written to the binary log. In this
     case, you should also use
     `--replicate-do-table=mysql.ndb_apply_status' to ensure that
     `mysql.ndb_apply_status' is replicated.

You should also remember that each replication rule requires the
following:

  1. Its own `--replicate-do-*' or `--replicate-ignore-*' option, and
     that multiple rules cannot be expressed in a single replication
     filtering option. For information about these rules, see *Note
     replication-options::.

  2. Its own `--binlog-do-db' or `--binlog-ignore-db' option, and that
     multiple rules cannot be expressed in a single binary log
     filtering option. For information about these rules, see *Note
     binary-log::.

If you are replicating a MySQL Cluster to a slave that uses a storage
engine other than *Note `NDB': mysql-cluster, the considerations just
given previously may not apply, as discussed elsewhere in this section.

MySQL Cluster Replication and IPv6

Currently, the NDB API and MGM API do not support IPv6. However, MySQL
Servers--including those acting as SQL nodes in a MySQL Cluster--can
use IPv6 to contact other MySQL Servers.  This means that you can
replicate between MySQL Clusters using IPv6 to connect the master and
slave SQL nodes as shown by the dotted arrow in the following diagram:

IPv6 Used to Connect Between MySQL Cluster SQL Nodes in Replication

However, all connections originating _within_ the MySQL
Cluster--represented in the preceding diagram by solid arrows--must use
IPv4. In other words, all MySQL Cluster data nodes, management servers,
and management clients must be accessible from one another using IPv4.
In addition, SQL nodes must use IPv4 to communicate with the cluster.

Since there is currently no support in the NDB and MGM APIs for IPv6,
any applications written using these APIs must also make all
connections using IPv4.

Attribute promotion and demotion

MySQL Cluster Replication includes support for attribute promotion and
demotion. The implementation of the latter distinguishes between lossy
and non-lossy type conversions, and their use on the slave can be
controlled by setting the `slave_type_conversions' global server system
variable.

For more information about attribute promotion and demotion in MySQL
Cluster, see *Note replication-features-attribute-promotion::.


File: manual.info,  Node: mysql-cluster-replication-schema,  Next: mysql-cluster-replication-preparation,  Prev: mysql-cluster-replication-issues,  Up: mysql-cluster-replication

17.6.4 MySQL Cluster Replication Schema and Tables
--------------------------------------------------

Replication in MySQL Cluster makes use of a number of dedicated tables
in the `mysql' database on each MySQL Server instance acting as an SQL
node in both the cluster being replicated and the replication slave
(whether the slave is a single server or a cluster). These tables are
created during the MySQL installation process by the *Note
`mysql_install_db': mysql-install-db. script, and include a table for
storing the binary log's indexing data. Since the `ndb_binlog_index'
table is local to each MySQL server and does not participate in
clustering, it uses the `MyISAM' storage engine. This means that it must
be created separately on each *Note `mysqld': mysqld.  participating in
the master cluster. (However, the binary log itself contains updates
from all MySQL servers in the cluster to be replicated.) This table is
defined as follows:

     CREATE TABLE `ndb_binlog_index` (
         `Position` BIGINT(20) UNSIGNED NOT NULL,
         `File` VARCHAR(255) NOT NULL,
         `epoch` BIGINT(20) UNSIGNED NOT NULL,
         `inserts` INT(10) UNSIGNED NOT NULL,
         `updates` INT(10) UNSIGNED NOT NULL,
         `deletes` INT(10) UNSIGNED NOT NULL,
         `schemaops` INT(10) UNSIGNED NOT NULL,
         `orig_server_id` INT(10) UNSIGNED NOT NULL,
         `orig_epoch` BIGINT(20) UNSIGNED NOT NULL,
         `gci` INT(10) UNSIGNED NOT NULL,
         `next_position` bigint(20) unsigned NOT NULL,
         `next_file` varchar(255) NOT NULL,
         PRIMARY KEY (`epoch`,`orig_server_id`,`orig_epoch`)
     ) ENGINE=MyISAM DEFAULT CHARSET=latin1;

The size of this table is dependent on the number of epochs per binary
log file and the number of binary log files. The number of epochs per
binlog file normally depends on the amount of binary log generated per
epoch and the size of the binary log file, with smaller epochs
resulting in more epochs per file. It should be noted that, when the
`--ndb-log-empty-epochs' option is `ON', then even empty epochs result
in inserts to the `ndb_binlog_index' file, meaning that the number of
entries per file depends on the length of time that the file is in use;
that is,

     [number of epochs per file] = [time spent per file / `TimeBetweenEpochs'

A busy MySQL Cluster writes to the binary log regularly and presumably
rotates binary log files more quickly than a quiet one.  This means
that a `quiet' MySQL Cluster with `--ndb-log-empty-epochs=ON' can
actually have a much higher number of `ndb_binlog_index' rows per file
than one with a great deal of activity.

When *Note `mysqld': mysqld. is started with the `--ndb-log-orig'
option, the `orig_server_id' and `orig_epoch' columns store,
respectively, the ID of the server on which the event originated and
the epoch in which the event took place on the originating server,
which is useful in MySQL Cluster replication setups employing multiple
masters. The *Note `SELECT': select. statement used to to find the
closest binlog position to the highest applied epoch on the slave in a
multi-master setup (see *Note mysql-cluster-replication-multi-master::)
employs these two columns, which are not indexed. This can lead to
performance issues when trying to fail over, since the query must
perform a table scan, especially when the master has been running with
`--ndb-log-empty-epochs=ON'. You can improve multi-master failover
times by adding an index to these columns, as shown here:

     ALTER TABLE mysql.ndb_binlog_index
         ADD INDEX orig_lookup USING BTREE (orig_server_id, orig_epoch);

Adding this index provides no benefit when replicating from a single
master to a single slave, since the query used to get the binary log
position in such cases makes no use of `orig_server_id' or `orig_epoch'.

The `next_position' and `next_file' columns were added in MySQL Cluster
NDB 7.2.6; see *Note mysql-cluster-replication-failover::, for more
information about using these columns.

The following figure shows the relationship of the MySQL Cluster
replication master server, its binlog injector thread, and the
`mysql.ndb_binlog_index' table.

The replication master cluster, the binlog injector thread, and the
`ndb_binlog_index' table

An additional table, named `ndb_apply_status', is used to keep a record
of the operations that have been replicated from the master to the
slave. Unlike the case with `ndb_binlog_index', the data in this table
is not specific to any one SQL node in the (slave) cluster, and so
`ndb_apply_status' can use the `NDBCLUSTER' storage engine, as shown
here:

     CREATE TABLE `ndb_apply_status` (
         `server_id`   INT(10) UNSIGNED NOT NULL,
         `epoch`       BIGINT(20) UNSIGNED NOT NULL,
         `log_name`    VARCHAR(255) CHARACTER SET latin1 COLLATE latin1_bin NOT NULL,
         `start_pos`   BIGINT(20) UNSIGNED NOT NULL,
         `end_pos`     BIGINT(20) UNSIGNED NOT NULL,
         PRIMARY KEY (`server_id`) USING HASH
     ) ENGINE=NDBCLUSTER   DEFAULT CHARSET=latin1;

This table is populated only on slaves; on the master, no `DataMemory'
is allocated to it. Since this table is populated from data originating
on the master, it should be allowed to replicate; any replication
filtering or binary log filtering rules that inadvertently prevent the
slave from updating `ndb_apply_status' or the master from writing into
the binary log may prevent replication between clusters from operating
properly. For more information about potential problems arising from
such filtering rules, see *Note
mysql-cluster-replication-issues-filtering::.

The `ndb_binlog_index' and `ndb_apply_status' tables are created in the
`mysql' database because they should not be explicitly replicated by
the user. User intervention is normally not required to create or
maintain either of these tables, since both `ndb_binlog_index' and the
`ndb_apply_status' are maintained by the *Note `NDB': mysql-cluster.
binary log (binlog) injector thread. This keeps the master *Note
`mysqld': mysqld. process updated to changes performed by the *Note
`NDB': mysql-cluster. storage engine. The *Note `NDB': mysql-cluster.
_binlog injector thread_ receives events directly from the *Note `NDB':
mysql-cluster. storage engine. The *Note `NDB': mysql-cluster. injector
is responsible for capturing all the data events within the cluster,
and ensures that all events which change, insert, or delete data are
recorded in the `ndb_binlog_index' table. The slave I/O thread
transfers the events from the master's binary log to the slave's relay
log.

However, it is advisable to check for the existence and integrity of
these tables as an initial step in preparing a MySQL Cluster for
replication. It is possible to view event data recorded in the binary
log by querying the `mysql.ndb_binlog_index' table directly on the
master. This can be also be accomplished using the *Note `SHOW BINLOG
EVENTS': show-binlog-events. statement on either the replication master
or slave MySQL servers. (See *Note show-binlog-events::.)

You can also obtain useful information from the output of *Note `SHOW
ENGINE NDB STATUS': show-engine.

The `ndb_schema' table is used to track schema changes made to *Note
`NDB': mysql-cluster. tables. It is defined as shown here:

     CREATE TABLE ndb_schema (
         `db` VARBINARY(63) NOT NULL,
         `name` VARBINARY(63) NOT NULL,
         `slock` BINARY(32) NOT NULL,
         `query` BLOB NOT NULL,
         `node_id` INT UNSIGNED NOT NULL,
         `epoch` BIGINT UNSIGNED NOT NULL,
         `id` INT UNSIGNED NOT NULL,
         `version` INT UNSIGNED NOT NULL,
         `type` INT UNSIGNED NOT NULL,
         PRIMARY KEY USING HASH (db,name)
     ) ENGINE=NDB   DEFAULT CHARSET=latin1;

Unlike the two tables previously mentioned in this section, the
`ndb_schema' table is not visible either to MySQL *Note `SHOW': show.
statements, or in any `INFORMATION_SCHEMA' tables; however, it can be
seen in the output of *Note `ndb_show_tables':
mysql-cluster-programs-ndb-show-tables, as shown here:

     shell> ndb_show_tables -t 2
     id    type                 state    logging database     schema   name
     4     UserTable            Online   Yes     mysql        def      ndb_apply_status
     5     UserTable            Online   Yes     ndbworld     def      City
     6     UserTable            Online   Yes     ndbworld     def      Country
     3     UserTable            Online   Yes     mysql        def      NDB$BLOB_2_3
     7     UserTable            Online   Yes     ndbworld     def      CountryLanguage
     _2     UserTable            Online   Yes     mysql        def      ndb_schema_

     NDBT_ProgramExit: 0 - OK

It is also possible to *Note `SELECT': select. from this table in *Note
`mysql': mysql. and other MySQL client applications, as shown here:

     mysql> SELECT * FROM mysql.ndb_schema WHERE name='City' \G
     *************************** 1. row ***************************
          db: ndbworld
        name: City
       slock:
       query: alter table City engine=ndb
     node_id: 4
       epoch: 0
          id: 0
     version: 0
        type: 7
     1 row in set (0.00 sec)

This can sometimes be useful when debugging applications.

*Note*:

When performing schema changes on *Note `NDB': mysql-cluster. tables,
applications should wait until the *Note `ALTER TABLE': alter-table.
statement has returned in the MySQL client connection that issued the
statement before attempting to use the updated definition of the table.

If the `ndb_apply_status' table or the `ndb_schema' table does not
exist on the slave, *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. re-creates the missing table or
tables (Bug #14612).

Conflict resolution for MySQL Cluster Replication requires the presence
of an additional `mysql.ndb_replication' table. Currently, this table
must be created manually. For information about how to do this, see
*Note mysql-cluster-replication-conflict-resolution::.


File: manual.info,  Node: mysql-cluster-replication-preparation,  Next: mysql-cluster-replication-starting,  Prev: mysql-cluster-replication-schema,  Up: mysql-cluster-replication

17.6.5 Preparing the MySQL Cluster for Replication
--------------------------------------------------

Preparing the MySQL Cluster for replication consists of the following
steps:

  1. Check all MySQL servers for version compatibility (see *Note
     mysql-cluster-replication-general::).

  2. Create a slave account on the master Cluster with the appropriate
     privileges:

          mysqlM> GRANT REPLICATION SLAVE
               -> ON *.* TO 'SLAVE_USER'@'SLAVE_HOST'
               -> IDENTIFIED BY 'SLAVE_PASSWORD';

     In the previous statement, SLAVE_USER is the slave account user
     name, SLAVE_HOST is the host name or IP address of the replication
     slave, and SLAVE_PASSWORD is the password to assign to this
     account.

     For example, to create a slave user account with the name
     ``myslave',' logging in from the host named ``rep-slave',' and
     using the password ``53cr37',' use the following *Note `GRANT':
     grant.  statement:

          mysqlM> GRANT REPLICATION SLAVE
               -> ON *.* TO 'myslave'@'rep-slave'
               -> IDENTIFIED BY '53cr37';

     For security reasons, it is preferable to use a unique user
     account--not employed for any other purpose--for the replication
     slave account.

  3. Configure the slave to use the master. Using the MySQL Monitor,
     this can be accomplished with the *Note `CHANGE MASTER TO':
     change-master-to. statement:

          mysqlS> CHANGE MASTER TO
               -> MASTER_HOST='MASTER_HOST',
               -> MASTER_PORT=MASTER_PORT,
               -> MASTER_USER='SLAVE_USER',
               -> MASTER_PASSWORD='SLAVE_PASSWORD';

     In the previous statement, MASTER_HOST is the host name or IP
     address of the replication master, MASTER_PORT is the port for the
     slave to use for connecting to the master, SLAVE_USER is the user
     name set up for the slave on the master, and SLAVE_PASSWORD is the
     password set for that user account in the previous step.

     For example, to tell the slave to replicate from the MySQL server
     whose host name is ``rep-master',' using the replication slave
     account created in the previous step, use the following statement:

          mysqlS> CHANGE MASTER TO
               -> MASTER_HOST='rep-master',
               -> MASTER_PORT=3306,
               -> MASTER_USER='myslave',
               -> MASTER_PASSWORD='53cr37';

     For a complete list of options that can be used with this
     statement, see *Note change-master-to::.

     To provide replication backup capability, you also need to add an
     `--ndb-connectstring' option to the slave's `my.cnf' file prior to
     starting the replication process. See *Note
     mysql-cluster-replication-backups::, for details.

     For additional options that can be set in `my.cnf' for replication
     slaves, see *Note replication-options::.

  4. If the master cluster is already in use, you can create a backup
     of the master and load this onto the slave to cut down on the
     amount of time required for the slave to synchronize itself with
     the master. If the slave is also running MySQL Cluster, this can
     be accomplished using the backup and restore procedure described in
     *Note mysql-cluster-replication-backups::.

          ndb-connectstring=MANAGEMENT_HOST[:PORT]

     In the event that you are _not_ using MySQL Cluster on the
     replication slave, you can create a backup with this command on
     the replication master:

          shellM> mysqldump --master-data=1

     Then import the resulting data dump onto the slave by copying the
     dump file over to the slave. After this, you can use the *Note
     `mysql': mysql. client to import the data from the dumpfile into
     the slave database as shown here, where DUMP_FILE is the name of
     the file that was generated using *Note `mysqldump': mysqldump. on
     the master, and DB_NAME is the name of the database to be
     replicated:

          shellS> mysql -u root -p DB_NAME < DUMP_FILE

     For a complete list of options to use with *Note `mysqldump':
     mysqldump, see *Note mysqldump::.

     *Note*:

     If you copy the data to the slave in this fashion, you should make
     sure that the slave is started with the `--skip-slave-start'
     option on the command line, or else include `skip-slave-start' in
     the slave's `my.cnf' file to keep it from trying to connect to the
     master to begin replicating before all the data has been loaded.
     Once the data loading has completed, follow the additional steps
     outlined in the next two sections.

  5. Ensure that each MySQL server acting as a replication master is
     configured with a unique server ID, and with binary logging
     enabled, using the row format. (See *Note replication-formats::.)
     These options can be set either in the master server's `my.cnf'
     file, or on the command line when starting the master *Note
     `mysqld': mysqld. process. See *Note
     mysql-cluster-replication-starting::, for information regarding
     the latter option.


File: manual.info,  Node: mysql-cluster-replication-starting,  Next: mysql-cluster-replication-two-channels,  Prev: mysql-cluster-replication-preparation,  Up: mysql-cluster-replication

17.6.6 Starting MySQL Cluster Replication (Single Replication Channel)
----------------------------------------------------------------------

This section outlines the procedure for starting MySQL Cluster
replication using a single replication channel.

  1. Start the MySQL replication master server by issuing this command:

          shellM> mysqld --ndbcluster --server-id=ID \
                  --log-bin &

     If the master is running MySQL Cluster NDB 7.2.12 or earlier, it
     must also be started with `--binlog-format=ROW' (or `MIXED'). (Bug
     #16417224)

     In the previous statement, ID is this server's unique ID (see
     *Note mysql-cluster-replication-general::). This starts the
     server's *Note `mysqld': mysqld. process with binary logging
     enabled using the proper logging format.

     *Note*:

     You can also start the master with `--binlog-format=MIXED', in
     which case row-based replication is used automatically when
     replicating between clusters. `STATEMENT' based binary logging is
     not supported for MySQL Cluster Replication (see *Note
     mysql-cluster-replication-general::).

  2. Start the MySQL replication slave server as shown here:

          shellS> mysqld --ndbcluster --server-id=ID &

     In the command just shown, ID is the slave server's unique ID. It
     is not necessary to enable logging on the replication slave.

     *Note*:

     You should use the `--skip-slave-start' option with this command
     or else you should include `skip-slave-start' in the slave server's
     `my.cnf' file, unless you want replication to begin immediately.
     With the use of this option, the start of replication is delayed
     until the appropriate *Note `START SLAVE': start-slave.  statement
     has been issued, as explained in Step 4 below.

  3. It is necessary to synchronize the slave server with the master
     server's replication binary log. If binary logging has not
     previously been running on the master, run the following statement
     on the slave:

          mysqlS> CHANGE MASTER TO
               -> MASTER_LOG_FILE='',
               -> MASTER_LOG_POS=4;

     This instructs the slave to begin reading the master's binary log
     from the log's starting point. Otherwise--that is, if you are
     loading data from the master using a backup--see *Note
     mysql-cluster-replication-failover::, for information on how to
     obtain the correct values to use for `MASTER_LOG_FILE' and
     `MASTER_LOG_POS' in such cases.

  4. Finally, you must instruct the slave to begin applying replication
     by issuing this command from the *Note `mysql': mysql. client on
     the replication slave:

          mysqlS> START SLAVE;

     This also initiates the transmission of replication data from the
     master to the slave.

It is also possible to use two replication channels, in a manner
similar to the procedure described in the next section; the differences
between this and using a single replication channel are covered in
*Note mysql-cluster-replication-two-channels::.

It is also possible to improve cluster replication performance by
enabling _batched updates_. This can be accomplished by setting the
`slave_allow_batching' system variable on the slave *Note `mysqld':
mysqld. processes.  Normally, updates are applied as soon as they are
received.  However, the use of batching causes updates to be applied in
32 KB batches, which can result in higher throughput and less CPU usage,
particularly where individual updates are relatively small.

*Note*:

Slave batching works on a per-epoch basis; updates belonging to more
than one transaction can be sent as part of the same batch.

All outstanding updates are applied when the end of an epoch is
reached, even if the updates total less than 32 KB.

Batching can be turned on and off at runtime. To activate it at
runtime, you can use either of these two statements:

     SET GLOBAL slave_allow_batching = 1;
     SET GLOBAL slave_allow_batching = ON;

If a particular batch causes problems (such as a statement whose
effects do not appear to be replicated correctly), slave batching can
be deactivated using either of the following statements:

     SET GLOBAL slave_allow_batching = 0;
     SET GLOBAL slave_allow_batching = OFF;

You can check whether slave batching is currently being used by means
of an appropriate *Note `SHOW VARIABLES': show-variables. statement,
like this one:

     mysql> SHOW VARIABLES LIKE 'slave%';
     +---------------------------+-------+
     | Variable_name             | Value |
     +---------------------------+-------+
     | slave_allow_batching      | ON    |
     | slave_compressed_protocol | OFF   |
     | slave_load_tmpdir         | /tmp  |
     | slave_net_timeout         | 3600  |
     | slave_skip_errors         | OFF   |
     | slave_transaction_retries | 10    |
     +---------------------------+-------+
     6 rows in set (0.00 sec)


File: manual.info,  Node: mysql-cluster-replication-two-channels,  Next: mysql-cluster-replication-failover,  Prev: mysql-cluster-replication-starting,  Up: mysql-cluster-replication

17.6.7 Using Two Replication Channels for MySQL Cluster Replication
-------------------------------------------------------------------

In a more complete example scenario, we envision two replication
channels to provide redundancy and thereby guard against possible
failure of a single replication channel. This requires a total of four
replication servers, two masters for the master cluster and two slave
servers for the slave cluster. For purposes of the discussion that
follows, we assume that unique identifiers are assigned as shown here:

This table lists server IDs (unique identifiers) for the MySQL cluster
replication servers described in the preceding text. The table also
provides a description of each cluster replication server.

Server ID              Description
1                      Master - primary replication channel (_M_)
2                      Master - secondary replication channel (_M'_)
3                      Slave - primary replication channel (_S_)
4                      Slave - secondary replication channel (_S'_)

Setting up replication with two channels is not radically different
from setting up a single replication channel. First, the *Note
`mysqld': mysqld. processes for the primary and secondary replication
masters must be started, followed by those for the primary and
secondary slaves. Then the replication processes may be initiated by
issuing the *Note `START SLAVE': start-slave. statement on each of the
slaves. The commands and the order in which they need to be issued are
shown here:

  1. Start the primary replication master:

          shellM> mysqld --ndbcluster --server-id=1 \
                         --log-bin &

     For MySQL Cluster NDB 7.2.12 and earlier, you should use the
     following (Bug #16417224):

          shellM> mysqld --ndbcluster --server-id=1 \
                         --log-bin --binlog-format=ROW &

  2. Start the secondary replication master:

          shellM'> mysqld --ndbcluster --server-id=2 \
                         --log-bin &

     For MySQL Cluster NDB 7.2.12 and earlier, you should use this
     instead (Bug #16417224):

          shellM'> mysqld --ndbcluster --server-id=2 \
                         --log-bin --binlog-format=ROW &

  3. Start the primary replication slave server:

          shellS> mysqld --ndbcluster --server-id=3 \
                         --skip-slave-start &

  4. Start the secondary replication slave:

          shellS'> mysqld --ndbcluster --server-id=4 \
                          --skip-slave-start &

  5. Finally, initiate replication on the primary channel by executing
     the *Note `START SLAVE': start-slave.  statement on the primary
     slave as shown here:

          mysqlS> START SLAVE;

     *Warning*:

     Only the primary channel is to be started at this point. The
     secondary replication channel is to be started only in the event
     that the primary replication channel fails, as described in *Note
     mysql-cluster-replication-failover::.  Running multiple
     replication channels simultaneously can result in unwanted
     duplicate records being created on the replication slaves.

As mentioned previously, it is not necessary to enable binary logging
on replication slaves.


File: manual.info,  Node: mysql-cluster-replication-failover,  Next: mysql-cluster-replication-backups,  Prev: mysql-cluster-replication-two-channels,  Up: mysql-cluster-replication

17.6.8 Implementing Failover with MySQL Cluster Replication
-----------------------------------------------------------

In the event that the primary Cluster replication process fails, it is
possible to switch over to the secondary replication channel. The
following procedure describes the steps required to accomplish this.

  1. Obtain the time of the most recent global checkpoint (GCP).  That
     is, you need to determine the most recent epoch from the
     `ndb_apply_status' table on the slave cluster, which can be found
     using the following query:

          mysqlS'> SELECT @latest:=MAX(epoch)
                ->        FROM mysql.ndb_apply_status;

  2. Using the information obtained from the query shown in Step 1,
     obtain the corresponding records from the `ndb_binlog_index' table
     on the master cluster.

     Prior to MySQL Cluster NDB 7.2.6, you should use the following
     query to accomplish this task:

          mysqlM'> SELECT
                ->     @file:=SUBSTRING_INDEX(File, '/', -1),
                ->     @pos:=Position
                -> FROM mysql.ndb_binlog_index
                -> WHERE epoch > @latest
                -> ORDER BY epoch ASC LIMIT 1;

     Beginning with MySQL Cluster NDB 7.2.6, you can take advantage of
     the improved binary logging of DDL statements implemented in those
     and later versions by using the following query to obtain the
     needed records from the master's `ndb_binlog_index' table:

          mysqlM'> SELECT
                ->     @file:=SUBSTRING_INDEX(next_file, '/', -1),
                ->     @pos:=next_position
                -> FROM mysql.ndb_binlog_index
                -> WHERE epoch = @latest
                -> ORDER BY epoch ASC LIMIT 1;

     In either case, these are the records saved on the master since
     the failure of the primary replication channel. We have employed a
     user variable `@latest' here to represent the value obtained in
     Step 1. Of course, it is not possible for one *Note `mysqld':
     mysqld. instance to access user variables set on another server
     instance directly. These values must be `plugged in' to the second
     query manually or in application code.

     *Important*:

     If (and only if) you use the second of the two queries just shown
     against `ndb_binlog_index' (that is, the query that employs the
     `next_position' and `next_file' columns), you must ensure that the
     slave *Note `mysqld': mysqld. is started with
     `--slave-skip-errors=ddl_exist_errors' before executing *Note
     `START SLAVE': start-slave.  Otherwise, replication may stop with
     duplicate DDL errors.

  3. Now it is possible to synchronize the secondary channel by running
     the following query on the secondary slave server:

          mysqlS'> CHANGE MASTER TO
                ->     MASTER_LOG_FILE='@file',
                ->     MASTER_LOG_POS=@pos;

     Again we have employed user variables (in this case `@file' and
     `@pos') to represent the values obtained in Step 2 and applied in
     Step 3; in practice these values must be inserted manually or using
     application code that can access both of the servers involved.

     *Note*:

     `@file' is a string value such as
     `'/var/log/mysql/replication-master-bin.00001'', and so must be
     quoted when used in SQL or application code.  However, the value
     represented by `@pos' must _not_ be quoted. Although MySQL
     normally attempts to convert strings to numbers, this case is an
     exception.

  4. You can now initiate replication on the secondary channel by
     issuing the appropriate command on the secondary slave *Note
     `mysqld': mysqld.:

          mysqlS'> START SLAVE;

Once the secondary replication channel is active, you can investigate
the failure of the primary and effect repairs. The precise actions
required to do this will depend upon the reasons for which the primary
channel failed.

*Warning*:

The secondary replication channel is to be started only if and when the
primary replication channel has failed. Running multiple replication
channels simultaneously can result in unwanted duplicate records being
created on the replication slaves.

If the failure is limited to a single server, it should (in theory) be
possible to replicate from M to S', or from M' to S; however, this has
not yet been tested.


File: manual.info,  Node: mysql-cluster-replication-backups,  Next: mysql-cluster-replication-multi-master,  Prev: mysql-cluster-replication-failover,  Up: mysql-cluster-replication

17.6.9 MySQL Cluster Backups With MySQL Cluster Replication
-----------------------------------------------------------

* Menu:

* mysql-cluster-replication-auto-sync::  MySQL Cluster Replication: Automating Synchronization of the Replication Slave to the Master Binary Log
* mysql-cluster-replication-pitr::  Point-In-Time Recovery Using MySQL Cluster Replication

This section discusses making backups and restoring from them using
MySQL Cluster replication. We assume that the replication servers have
already been configured as covered previously (see *Note
mysql-cluster-replication-preparation::, and the sections immediately
following). This having been done, the procedure for making a backup
and then restoring from it is as follows:

  1. There are two different methods by which the backup may be started.

        * Method A

          This method requires that the cluster backup process was
          previously enabled on the master server, prior to starting
          the replication process. This can be done by including the
          following line in a `[mysql_cluster]' section in the `my.cnf
          file', where MANAGEMENT_HOST is the IP address or host name
          of the *Note `NDB': mysql-cluster. management server for the
          master cluster, and PORT is the management server's port
          number:

               ndb-connectstring=MANAGEMENT_HOST[:PORT]

          *Note*:

          The port number needs to be specified only if the default
          port (1186) is not being used. See *Note
          mysql-cluster-install-configuration::, for more information
          about ports and port allocation in MySQL Cluster.

          In this case, the backup can be started by executing this
          statement on the replication master:

               shellM> ndb_mgm -e "START BACKUP"

        * Method B

          If the `my.cnf' file does not specify where to find the
          management host, you can start the backup process by passing
          this information to the *Note `NDB': mysql-cluster.
          management client as part of the `START BACKUP' command.
          This can be done as shown here, where MANAGEMENT_HOST and
          PORT are the host name and port number of the management
          server:

               shellM> ndb_mgm MANAGEMENT_HOST:PORT -e "START BACKUP"

          In our scenario as outlined earlier (see *Note
          mysql-cluster-replication-preparation::), this would be
          executed as follows:

               shellM> ndb_mgm rep-master:1186 -e "START BACKUP"

  2. Copy the cluster backup files to the slave that is being brought
     on line. Each system running an *Note `ndbd':
     mysql-cluster-programs-ndbd. process for the master cluster will
     have cluster backup files located on it, and _all_ of these files
     must be copied to the slave to ensure a successful restore. The
     backup files can be copied into any directory on the computer
     where the slave management host resides, so long as the MySQL and
     NDB binaries have read permissions in that directory. In this
     case, we will assume that these files have been copied into the
     directory `/var/BACKUPS/BACKUP-1'.

     It is not necessary that the slave cluster have the same number of
     *Note `ndbd': mysql-cluster-programs-ndbd. processes (data nodes)
     as the master; however, it is highly recommended this number be
     the same. It _is_ necessary that the slave be started with the
     `--skip-slave-start' option, to prevent premature startup of the
     replication process.

  3. Create any databases on the slave cluster that are present on the
     master cluster that are to be replicated to the slave.

     *Important*:

     A *Note `CREATE DATABASE': create-database. (or *Note `CREATE
     SCHEMA': create-database.) statement corresponding to each database
     to be replicated must be executed on each SQL node in the slave
     cluster.

  4. Reset the slave cluster using this statement in the MySQL Monitor:

          mysqlS> RESET SLAVE;

     It is important to make sure that the slave's `apply_status' table
     does not contain any records prior to running the restore process.
     You can accomplish this by running this SQL statement on the slave:

          mysqlS> DELETE FROM mysql.ndb_apply_status;

  5. You can now start the cluster restoration process on the
     replication slave using the *Note `ndb_restore':
     mysql-cluster-programs-ndb-restore.  command for each backup file
     in turn. For the first of these, it is necessary to include the
     `-m' option to restore the cluster metadata:

          shellS> ndb_restore -c SLAVE_HOST:PORT -n NODE-ID \
                  -b BACKUP-ID -m -r DIR

     DIR is the path to the directory where the backup files have been
     placed on the replication slave. For the *Note `ndb_restore':
     mysql-cluster-programs-ndb-restore. commands corresponding to the
     remaining backup files, the `-m' option should _not_ be used.

     For restoring from a master cluster with four data nodes (as shown
     in the figure in *Note mysql-cluster-replication::) where the
     backup files have been copied to the directory
     `/var/BACKUPS/BACKUP-1', the proper sequence of commands to be
     executed on the slave might look like this:

          shellS> ndb_restore -c rep-slave:1186 -n 2 -b 1 -m \
                  -r ./var/BACKUPS/BACKUP-1
          shellS> ndb_restore -c rep-slave:1186 -n 3 -b 1 \
                  -r ./var/BACKUPS/BACKUP-1
          shellS> ndb_restore -c rep-slave:1186 -n 4 -b 1 \
                  -r ./var/BACKUPS/BACKUP-1
          shellS> ndb_restore -c rep-slave:1186 -n 5 -b 1 -e \
                  -r ./var/BACKUPS/BACKUP-1

     *Important*:

     The `-e' (or `--restore_epoch') option in the final invocation of
     *Note `ndb_restore': mysql-cluster-programs-ndb-restore. in this
     example is required in order that the epoch is written to the
     slave `mysql.ndb_apply_status'.  Without this information, the
     slave will not be able to synchronize properly with the master.
     (See *Note mysql-cluster-programs-ndb-restore::.)

  6. Now you need to obtain the most recent epoch from the
     `ndb_apply_status' table on the slave (as discussed in *Note
     mysql-cluster-replication-failover::):

          mysqlS> SELECT @latest:=MAX(epoch)
                  FROM mysql.ndb_apply_status;

  7. Using `@latest' as the epoch value obtained in the previous step,
     you can obtain the correct starting position `@pos' in the correct
     binary log file `@file' from the master's `mysql.ndb_binlog_index'
     table using the query shown here:

          mysqlM> SELECT
               ->     @file:=SUBSTRING_INDEX(File, '/', -1),
               ->     @pos:=Position
               -> FROM mysql.ndb_binlog_index
               -> WHERE epoch > @latest
               -> ORDER BY epoch ASC LIMIT 1;

     In the event that there is currently no replication traffic, you
     can get this information by running *Note `SHOW MASTER STATUS':
     show-master-status. on the master and using the value in the
     `Position' column for the file whose name has the suffix with the
     greatest value for all files shown in the `File' column. However,
     in this case, you must determine this and supply it in the next
     step manually or by parsing the output with a script.

  8. Using the values obtained in the previous step, you can now issue
     the appropriate *Note `CHANGE MASTER TO': change-master-to.
     statement in the slave's *Note `mysql': mysql.  client:

          mysqlS> CHANGE MASTER TO
               ->     MASTER_LOG_FILE='@file',
               ->     MASTER_LOG_POS=@pos;

  9. Now that the slave `knows' from what point in which `binlog' file
     to start reading data from the master, you can cause the slave to
     begin replicating with this standard MySQL statement:

          mysqlS> START SLAVE;

To perform a backup and restore on a second replication channel, it is
necessary only to repeat these steps, substituting the host names and
IDs of the secondary master and slave for those of the primary master
and slave replication servers where appropriate, and running the
preceding statements on them.

For additional information on performing Cluster backups and restoring
Cluster from backups, see *Note mysql-cluster-backup::.


File: manual.info,  Node: mysql-cluster-replication-auto-sync,  Next: mysql-cluster-replication-pitr,  Prev: mysql-cluster-replication-backups,  Up: mysql-cluster-replication-backups

17.6.9.1 MySQL Cluster Replication: Automating Synchronization of the Replication Slave to the Master Binary Log
................................................................................................................

It is possible to automate much of the process described in the
previous section (see *Note mysql-cluster-replication-backups::). The
following Perl script `reset-slave.pl' serves as an example of how you
can do this.

     #!/user/bin/perl -w

     #  file: reset-slave.pl

     #  Copyright (C)2005 MySQL AB

     #  This program is free software; you can redistribute it and/or modify
     #  it under the terms of the GNU General Public License as published by
     #  the Free Software Foundation; either version 2 of the License, or
     #  (at your option) any later version.

     #  This program is distributed in the hope that it will be useful,
     #  but WITHOUT ANY WARRANTY; without even the implied warranty of
     #  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     #  GNU General Public License for more details.

     #  You should have received a copy of the GNU General Public License
     #  along with this program; if not, write to:
     #  Free Software Foundation, Inc.
     #  59 Temple Place, Suite 330
     #  Boston, MA 02111-1307 USA
     #
     #  Version 1.1

     ######################## Includes ###############################

     use DBI;

     ######################## Globals ################################

     my  $m_host='';
     my  $m_port='';
     my  $m_user='';
     my  $m_pass='';
     my  $s_host='';
     my  $s_port='';
     my  $s_user='';
     my  $s_pass='';
     my  $dbhM='';
     my  $dbhS='';

     ####################### Sub Prototypes ##########################

     sub CollectCommandPromptInfo;
     sub ConnectToDatabases;
     sub DisconnectFromDatabases;
     sub GetSlaveEpoch;
     sub GetMasterInfo;
     sub UpdateSlave;

     ######################## Program Main ###########################

     CollectCommandPromptInfo;
     ConnectToDatabases;
     GetSlaveEpoch;
     GetMasterInfo;
     UpdateSlave;
     DisconnectFromDatabases;

     ################## Collect Command Prompt Info ##################

     sub CollectCommandPromptInfo
     {
       ### Check that user has supplied correct number of command line args
       die "Usage:\n
            reset-slave >master MySQL host< >master MySQL port< \n
                        >master user< >master pass< >slave MySQL host< \n
                        >slave MySQL port< >slave user< >slave pass< \n
            All 8 arguments must be passed. Use BLANK for NULL passwords\n"
            unless @ARGV == 8;

       $m_host  =  $ARGV[0];
       $m_port  =  $ARGV[1];
       $m_user  =  $ARGV[2];
       $m_pass  =  $ARGV[3];
       $s_host  =  $ARGV[4];
       $s_port  =  $ARGV[5];
       $s_user  =  $ARGV[6];
       $s_pass  =  $ARGV[7];

       if ($m_pass eq "BLANK") { $m_pass = '';}
       if ($s_pass eq "BLANK") { $s_pass = '';}
     }

     ###############  Make connections to both databases #############

     sub ConnectToDatabases
     {
       ### Connect to both master and slave cluster databases

       ### Connect to master
       $dbhM
         = DBI->connect(
         "dbi:mysql:database=mysql;host=$m_host;port=$m_port",
         "$m_user", "$m_pass")
           or die "Can't connect to Master Cluster MySQL process!
                   Error: $DBI::errstr\n";

       ### Connect to slave
       $dbhS
         = DBI->connect(
               "dbi:mysql:database=mysql;host=$s_host",
               "$s_user", "$s_pass")
         or die "Can't connect to Slave Cluster MySQL process!
                 Error: $DBI::errstr\n";
     }

     ################  Disconnect from both databases ################

     sub DisconnectFromDatabases
     {
       ### Disconnect from master

       $dbhM->disconnect
       or warn " Disconnection failed: $DBI::errstr\n";

       ### Disconnect from slave

       $dbhS->disconnect
       or warn " Disconnection failed: $DBI::errstr\n";
     }

     ######################  Find the last good GCI ##################

     sub GetSlaveEpoch
     {
       $sth = $dbhS->prepare("SELECT MAX(epoch)
                              FROM mysql.ndb_apply_status;")
           or die "Error while preparing to select epoch from slave: ",
                  $dbhS->errstr;

       $sth->execute
           or die "Selecting epoch from slave error: ", $sth->errstr;

       $sth->bind_col (1, \$epoch);
       $sth->fetch;
       print "\tSlave Epoch =  $epoch\n";
       $sth->finish;
     }

     #######  Find the position of the last GCI in the binary log ########

     sub GetMasterInfo
     {
       $sth = $dbhM->prepare("SELECT
                                SUBSTRING_INDEX(File, '/', -1), Position
                              FROM mysql.ndb_binlog_index
                              WHERE epoch > $epoch
                              ORDER BY epoch ASC LIMIT 1;")
           or die "Prepare to select from master error: ", $dbhM->errstr;

       $sth->execute
           or die "Selecting from master error: ", $sth->errstr;

       $sth->bind_col (1, \$binlog);
       $sth->bind_col (2, \$binpos);
       $sth->fetch;
       print "\tMaster binary log =  $binlog\n";
       print "\tMaster binary log position =  $binpos\n";
       $sth->finish;
     }

     ##########  Set the slave to process from that location #########

     sub UpdateSlave
     {
       $sth = $dbhS->prepare("CHANGE MASTER TO
                              MASTER_LOG_FILE='$binlog',
                              MASTER_LOG_POS=$binpos;")
           or die "Prepare to CHANGE MASTER error: ", $dbhS->errstr;

       $sth->execute
            or die "CHANGE MASTER on slave error: ", $sth->errstr;
       $sth->finish;
       print "\tSlave has been updated. You may now start the slave.\n";
     }

     # end reset-slave.pl


File: manual.info,  Node: mysql-cluster-replication-pitr,  Prev: mysql-cluster-replication-auto-sync,  Up: mysql-cluster-replication-backups

17.6.9.2 Point-In-Time Recovery Using MySQL Cluster Replication
...............................................................

_Point-in-time_ recovery--that is, recovery of data changes made since
a given point in time--is performed after restoring a full backup that
returns the server to its state when the backup was made.  Performing
point-in-time recovery of MySQL Cluster tables with MySQL Cluster and
MySQL Cluster Replication can be accomplished using a native *Note
`NDB': mysql-cluster. data backup (taken by issuing `CREATE BACKUP' in
the *Note `ndb_mgm': mysql-cluster-programs-ndb-mgm. client) and
restoring the `ndb_binlog_index' table (from a dump made using *Note
`mysqldump': mysqldump.).

To perform point-in-time recovery of MySQL Cluster, it is necessary to
follow the steps shown here:

  1. Back up all `NDB' databases in the cluster, using the `START
     BACKUP' command in the *Note `ndb_mgm':
     mysql-cluster-programs-ndb-mgm. client (see *Note
     mysql-cluster-backup::).

  2. At some later point, prior to restoring the cluster, make a backup
     of the `mysql.ndb_binlog_index' table. It is probably simplest to
     use *Note `mysqldump': mysqldump. for this task. Also back up the
     binary log files at this time.

     This backup should be updated regularly--perhaps even
     hourly--depending on your needs.

  3. (_Catastrophic failure or error occurs_.)

  4. Locate the last known good backup.

  5. Clear the data node file systems (using *Note `ndbd':
     mysql-cluster-programs-ndbd.  `--initial' or *Note `ndbmtd':
     mysql-cluster-programs-ndbmtd.  `--initial').

     *Note*:

     MySQL Cluster Disk Data tablespace and log files are not removed
     by `--initial'. You must delete these manually.

  6. Use *Note `DROP TABLE': drop-table. or *Note `TRUNCATE TABLE':
     truncate-table. with the `mysql.ndb_binlog_index' table.

  7. Execute *Note `ndb_restore': mysql-cluster-programs-ndb-restore,
     restoring all data.  You must include the `--restore_epoch' option
     when you run *Note `ndb_restore':
     mysql-cluster-programs-ndb-restore, so that the `ndb_apply_status'
     table is populated correctly. (See *Note
     mysql-cluster-programs-ndb-restore::, for more information.)

  8. Restore the `ndb_binlog_index' table from the output of *Note
     `mysqldump': mysqldump. and restore the binary log files from
     backup, if necessary.

  9. Find the epoch applied most recently--that is, the maximum `epoch'
     column value in the `ndb_apply_status' table--as the user variable
     `@LATEST_EPOCH' (emphasized):

          SELECT _@LAST_EPOCH_:=MAX(epoch)
              FROM mysql.ndb_apply_status;

 10. Find the latest binary log file (`@FIRST_FILE') and position
     (`Position' column value) within this file that correspond to
     `@LATEST_EPOCH' in the `ndb_binlog_index' table:

          SELECT Position, _@FIRST_FILE_:=File
              FROM mysql.ndb_binlog_index
              WHERE epoch > _@LAST_EPOCH_ ORDER BY epoch ASC LIMIT 1;

 11. Using *Note `mysqlbinlog': mysqlbinlog, replay the binary log
     events from the given file and position up to the point of the
     failure. (See *Note mysqlbinlog::.)

See also *Note point-in-time-recovery::, for more information about the
binary log, replication, and incremental recovery.


File: manual.info,  Node: mysql-cluster-replication-multi-master,  Next: mysql-cluster-replication-conflict-resolution,  Prev: mysql-cluster-replication-backups,  Up: mysql-cluster-replication

17.6.10 MySQL Cluster Replication: Multi-Master and Circular Replication
------------------------------------------------------------------------

It is possible to use MySQL Cluster in multi-master replication,
including circular replication between a number of MySQL Clusters.

Circular replication example

In the next few paragraphs we consider the example of a replication
setup involving three MySQL Clusters numbered 1, 2, and 3, in which
Cluster 1 acts as the replication master for Cluster 2, Cluster 2 acts
as the master for Cluster 3, and Cluster 3 acts as the master for
Cluster 1. Each cluster has two SQL nodes, with SQL nodes A and B
belonging to Cluster 1, SQL nodes C and D belonging to Cluster 2, and
SQL nodes E and F belonging to Cluster 3.

Circular replication using these clusters is supported as long as the
following conditions are met:

   * The SQL nodes on all masters and slaves are the same

   * All SQL nodes acting as replication masters and slaves are started
     using the `--log-slave-updates' option

This type of circular replication setup is shown in the following
diagram:

MySQL Cluster circular replication scheme in which all master SQL nodes
are also slaves.

In this scenario, SQL node A in Cluster 1 replicates to SQL node C in
Cluster 2; SQL node C replicates to SQL node E in Cluster 3; SQL node E
replicates to SQL node A. In other words, the replication line
(indicated by the red arrows in the diagram) directly connects all SQL
nodes used as replication masters and slaves.

It is also possible to set up circular replication in such a way that
not all master SQL nodes are also slaves, as shown here:

MySQL Cluster circular replication scheme in which all master SQL nodes
are not also necessarily slaves.

In this case, different SQL nodes in each cluster are used as
replication masters and slaves. However, you must _not_ start any of
the SQL nodes using `--log-slave-updates'. This type of circular
replication scheme for MySQL Cluster, in which the line of replication
(again indicated by the red arrows in the diagram) is discontinuous,
should be possible, but it should be noted that it has not yet been
thoroughly tested and must therefore still be considered experimental.

*Important*:

You should execute the following statement before starting circular
replication:

     mysql> SET GLOBAL SLAVE_EXEC_MODE = 'IDEMPOTENT';

This is necessary to suppress duplicate-key and other errors that
otherwise break circular replication in MySQL Cluster.  `IDEMPOTENT'
mode is also required for multi-master replication when using MySQL
Cluster. (Bug #31609)

See `slave_exec_mode', for more information.

Using NDB-native backup and restore to initialize a slave MySQL Cluster

When setting up circular replication, it is possible to initialize the
slave cluster by using the management client `BACKUP' command on one
MySQL Cluster to create a backup and then applying this backup on
another MySQL Cluster using *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. However, this does not
automatically create binary logs on the second MySQL Cluster's SQL node
acting as the replication slave. In order to cause the binary logs to
be created, you must issue a *Note `SHOW TABLES': show-tables.
statement on that SQL node; this should be done prior to running *Note
`START SLAVE': start-slave.

This is a known issue which we intend to address in a future release.

Multi-master failover example

In this section, we discuss failover in a multi-master MySQL Cluster
replication setup with three MySQL Clusters having server IDs 1, 2, and
3. In this scenario, Cluster 1 replicates to Clusters 2 and 3; Cluster
2 also replicates to Cluster 3.  This relationship is shown here:

Multi-master MySQL Cluster replication setup, with three MySQL Clusters

In other words, data replicates from Cluster 1 to Cluster 3 through 2
different routes: directly, and by way of Cluster 2.

Not all MySQL servers taking part in multi-master replication must act
as both master and slave, and a given MySQL Cluster might use different
SQL nodes for different replication channels. Such a case is shown here:

Multi-master MySQL Cluster replication setup, detail with MySQL Servers

MySQL servers acting as replication slaves must be run with the
`--log-slave-updates' option. Which *Note `mysqld': mysqld. processes
require this option is also shown in the preceding diagram.

*Note*:

Using the `--log-slave-updates' option has no effect on servers not
being run as replication slaves.

The need for failover arises when one of the replicating clusters goes
down. In this example, we consider the case where Cluster 1 is lost to
service, and so Cluster 3 loses 2 sources of updates from Cluster 1.
Because replication between MySQL Clusters is asynchronous, there is no
guarantee that Cluster 3's updates originating directly from Cluster 1
are more recent than those received through Cluster 2. You can handle
this by ensuring that Cluster 3 catches up to Cluster 2 with regard to
updates from Cluster 1. In terms of MySQL servers, this means that you
need to replicate any outstanding updates from MySQL server C to server
F.

On server C, perform the following queries:

     mysqlC> SELECT @latest:=MAX(epoch)
          ->     FROM mysql.ndb_apply_status
          ->     WHERE server_id=1;

     mysqlC> SELECT
          ->     @file:=SUBSTRING_INDEX(File, '/', -1),
          ->     @pos:=Position
          ->     FROM mysql.ndb_binlog_index
          ->     WHERE orig_epoch >= @latest
          ->     AND orig_server_id = 1
          ->     ORDER BY epoch ASC LIMIT 1;

*Note*:

You can improve the performance of this query, and thus likely speed up
failover times significantly, by adding the appropriate index to the
`ndb_binlog_index' table. See *Note mysql-cluster-replication-schema::,
for more information.

Copy over the values for @FILE and @POS manually from server C to
server F (or have your application perform the equivalent). Then, on
server F, execute the following *Note `CHANGE MASTER TO':
change-master-to. statement:

     mysqlF> CHANGE MASTER TO
          ->     MASTER_HOST = 'serverC'
          ->     MASTER_LOG_FILE='@file',
          ->     MASTER_LOG_POS=@pos;

Once this has been done, you can issue a *Note `START SLAVE':
start-slave. statement on MySQL server F, and any missing updates
originating from server B will be replicated to server F.

The *Note `CHANGE MASTER TO': change-master-to. statement also supports
an `IGNORE_SERVER_IDS' option which takes a comma-separated list of
server IDs and causes events originating from the corresponding servers
to be ignored. For more information, see *Note change-master-to::, and
*Note show-slave-status::.


File: manual.info,  Node: mysql-cluster-replication-conflict-resolution,  Prev: mysql-cluster-replication-multi-master,  Up: mysql-cluster-replication

17.6.11 MySQL Cluster Replication Conflict Resolution
-----------------------------------------------------

When using a replication setup involving multiple masters (including
circular replication), it is possible that different masters may try to
update the same row on the slave with different data. Conflict
resolution in MySQL Cluster Replication provides a means of resolving
such conflicts by permitting a user-defined resolution column to be
used to determine whether or not an update on a given master should be
applied on the slave.

Some types of conflict resolution supported by MySQL Cluster
(`NDB$OLD()', `NDB$MAX()', `NDB$MAX_DELETE_WIN()') implement this
user-defined column as a `timestamp' column (although its type cannot
be *Note `TIMESTAMP': datetime, as explained later in this section).
These types of conflict resolution are always applied a row-by-row
basis rather than a transactional basis. The epoch-based conflict
resolution functions introduced in MySQL Cluster NDB 7.2.1
(`NDB$EPOCH()' and `NDB$EPOCH_TRANS()') compare the order in which
epochs are replicated (and thus these functions are transactional).
Different methods can be used to compare resolution column values on
the slave when conflicts occur, as explained later in this section; the
method used can be set on a per-table basis.

You should also keep in mind that it is the application's
responsibility to ensure that the resolution column is correctly
populated with relevant values, so that the resolution function can
make the appropriate choice when determining whether to apply an update.

Requirements

Preparations for conflict resolution must be made on both the master
and the slave. These tasks are described in the following list:

   * On the master writing the binary logs, you must determine which
     columns are sent (all columns or only those that have been
     updated). This is done for the MySQL Server as a whole by applying
     the *Note `mysqld': mysqld. startup option `--ndb-log-updated-only'
     (described later in this section) or on a per-table basis by
     entries in the `mysql.ndb_replication' table (see *Note
     mysql-cluster-ndb-replication-table::).

     *Note*:

     If you are replicating tables with very large columns (such as
     *Note `TEXT': blob. or *Note `BLOB': blob. columns),
     `--ndb-log-updated-only' can also be useful for reducing the size
     of the master and slave binary logs and avoiding possible
     replication failures due to exceeding `max_allowed_packet'.

     See *Note replication-features-max-allowed-packet::, for more
     information about this issue.

   * On the slave, you must determine which type of conflict resolution
     to apply (`latest timestamp wins', `same timestamp wins', `primary
     wins', `primary wins, complete transaction', or none). This is
     done using the `mysql.ndb_replication' system table, on a
     per-table basis (see *Note mysql-cluster-ndb-replication-table::).

   * Prior to MySQL Cluster NDB 7.2.5, conflict detection and
     resolution did not always work properly unless set up for *Note
     `NDB': mysql-cluster. tables created on the same server only (Bug
     #13578660).

When using the functions `NDB$OLD()', `NDB$MAX()', and
`NDB$MAX_DELETE_WIN()' for timestamp-based conflict resolution, we
often refer to the column used for determining updates as a `timestamp'
column. However, the data type of this column is never *Note
`TIMESTAMP': datetime.; instead, its data type should be *Note `INT':
integer-types.  (*Note `INTEGER': integer-types.) or *Note `BIGINT':
integer-types. The `timestamp' column should also be `UNSIGNED' and
`NOT NULL'.

The `NDB$EPOCH()' and `NDB$EPOCH_TRANS()' functions discussed later in
this section work by comparing the relative order of replication epochs
applied on a primary and secondary MySQL Cluster, and do not make use
of timestamps.

Master column control

We can see update operations in terms of `before' and `after'
images--that is, the states of the table before and after the update is
applied. Normally, when updating a table with a primary key, the
`before' image is not of great interest; however, when we need to
determine on a per-update basis whether or not to use the updated
values on a replication slave, we need to make sure that both images
are written to the master's binary log. This is done with the
`--ndb-log-update-as-write' option for *Note `mysqld': mysqld, as
described later in this section.

*Important*:

Whether logging of complete rows or of updated columns only is done is
decided when the MySQL server is started, and cannot be changed online;
you must either restart *Note `mysqld': mysqld, or start a new *Note
`mysqld': mysqld. instance with different logging options.

* Logging Full or Partial Rows (`--ndb-log-updated-only' Option) *

Options for ndb_log_updated_only

*Command-Line Format*  `--ndb-log-updated-only'        
*Option-File Format*   `ndb_log_updated_only'        
*System Variable Name* `ndb_log_updated_only'        
*Variable Scope*       Global          
*Dynamic Variable*     Yes             
                       *Permitted        
                       Values*         
*Type*                 `boolean'        
*Default*              `ON'            

For purposes of conflict resolution, there are two basic methods of
logging rows, as determined by the setting of the
`--ndb-log-updated-only' option for *Note `mysqld': mysqld.:

   * Log complete rows

   * Log only column data that has been updated--that is, column data
     whose value has been set, regardless of whether or not this value
     was actually changed. This is the default behavior.

It is usually sufficient--and more efficient--to log updated columns
only; however, if you need to log full rows, you can do so by setting
`--ndb-log-updated-only' to `0' or `OFF'.

* `--ndb-log-update-as-write' Option: Logging Changed Data as Updates *

Options for ndb-log-update-as-write

*Command-Line Format*  `--ndb-log-update-as-write'        
*Option-File Format*   `ndb-log-update-as-write'        
*System Variable Name* `ndb_log_update_as_write'        
*Variable Scope*       Global          
*Dynamic Variable*     Yes             
                       *Permitted        
                       Values*         
*Type*                 `boolean'        
*Default*              `ON'            

The setting of the MySQL Server's `--ndb-log-update-as-write' option
determines whether logging is performed with or without the `before'
image. Because conflict resolution is done in the MySQL Server's update
handler, it is necessary to control logging on the master such that
updates are updates and not writes; that is, such that updates are
treated as changes in existing rows rather than the writing of new rows
(even though these replace existing rows). This option is turned on by
default; in other words, updates are treated as writes. (That is,
updates are by default written as `write_row' events in the binary log,
rather than as `update_row' events.) To turn off the option, start the
master *Note `mysqld': mysqld. with `--ndb-log-update-as-write=0' or
`--ndb-log-update-as-write=OFF'.

Conflict resolution control

Conflict resolution is usually enabled on the server where conflicts
can occur. Like logging method selection, it is enabled by entries in
the `mysql.ndb_replication' table.

The `ndb_replication' system table

To enable conflict resolution, it is necessary to create an
`ndb_replication' table in the `mysql' system database on the master,
the slave, or both, depending on the conflict resolution type and
method to be employed. This table is used to control logging and
conflict resolution functions on a per-table basis, and has one row per
table involved in replication.  `ndb_replication' is created and filled
with control information on the server where the conflict is to be
resolved. In a simple master-slave setup where data can also be changed
locally on the slave this will typically be the slave.  In a more
complex master-master (2-way) replication schema this will usually be
all of the masters involved. Each row in `mysql.ndb_replication'
corresponds to a table being replicated, and specifies how to log and
resolve conflicts (that is, which conflict resolution function, if any,
to use) for that table. The definition of the `mysql.ndb_replication'
table is shown here:

     CREATE TABLE mysql.ndb_replication  (
         db VARBINARY(63),
         table_name VARBINARY(63),
         server_id INT UNSIGNED,
         binlog_type INT UNSIGNED,
         conflict_fn VARBINARY(128),
         PRIMARY KEY USING HASH (db, table_name, server_id)
     )   ENGINE=NDB
     PARTITION BY KEY(db,table_name);

The columns in this table are described in the next few paragraphs.

`db'

The name of the database containing the table to be replicated.

`table_name'

The name of the table to be replicated.

`server_id'

The unique server ID of the MySQL instance (SQL node) where the table
resides.

`binlog_type'

The type of binary logging to be employed. This is determined as shown
in the following table:

This table lists `binlog_type' values and provides the internal value
and a description for each.

Value   Internal Value                Description
0       `NBT_DEFAULT'                 Use server default
1       `NBT_NO_LOGGING'              Do not log this table in the binary
                                      log
2       `NBT_UPDATED_ONLY'            Only updated attributes are logged
3       `NBT_FULL'                    Log full row, even if not updated
                                      (MySQL server default behavior)
4       `NBT_USE_UPDATE'              (For generating
                                      `NBT_UPDATED_ONLY_USE_UPDATE' and
                                      `NBT_FULL_USE_UPDATE' values
                                      only--not intended for separate use)
5       [_Not used_]                  --
6       `NBT_UPDATED_ONLY_USE_UPDATE' Use updated attributes, even if
        (equal to `NBT_UPDATED_ONLY   values are unchanged
        | NBT_USE_UPDATE')            
7       `NBT_FULL_USE_UPDATE' (equal  Use full row, even if values are
        to `NBT_FULL |                unchanged
        NBT_USE_UPDATE')              

`conflict_fn'

The conflict resolution function to be applied. This function must be
specified as one of those shown in the following list:

   * *Note mysql-cluster-replication-ndb-old::

   * *Note mysql-cluster-replication-ndb-max::

   * *Note mysql-cluster-replication-ndb-max-delete-win::

   * *Note mysql-cluster-replication-ndb-epoch:: (MySQL Cluster NDB
     7.2.1 and later)

   * *Note mysql-cluster-replication-ndb-epoch-trans:: (MySQL Cluster
     NDB 7.2.1 and later)

   * `NULL'

These functions are described in the next few paragraphs.

`NDB$OLD(COLUMN_NAME')

If the value of COLUMN_NAME is the same on both the master and the
slave, then the update is applied; otherwise, the update is not applied
on the slave and an exception is written to the log. This is
illustrated by the following pseudocode:

     if (MASTER_OLD_COLUMN_VALUE == SLAVE_CURRENT_COLUMN_VALUE)
       apply_update();
     else
       log_exception();

This function can be used for `same value wins' conflict resolution.
This type of conflict resolution ensures that updates are not applied
on the slave from the wrong master.

*Important*:

The column value from the master's `before' image is used by this
function.

`NDB$MAX(COLUMN_NAME')

If the `timestamp' column value for a given row coming from the master
is higher than that on the slave, it is applied; otherwise it is not
applied on the slave. This is illustrated by the following pseudocode:

     if (MASTER_NEW_COLUMN_VALUE > SLAVE_CURRENT_COLUMN_VALUE)
       apply_update();

This function can be used for `greatest timestamp wins' conflict
resolution. This type of conflict resolution ensures that, in the event
of a conflict, the version of the row that was most recently updated is
the version that persists.

*Important*:

The column value from the master's `after' image is used by this
function.

`NDB$MAX_DELETE_WIN(COLUMN_NAME')

This is a variation on `NDB$MAX()'. Due to the fact that no timestamp
is available for a delete operation, a delete using `NDB$MAX()' is in
fact processed as `NDB$OLD'. However, for some use cases, this is not
optimal. For `NDB$MAX_DELETE_WIN()', if the `timestamp' column value
for a given row adding or updating an existing row coming from the
master is higher than that on the slave, it is applied. However, delete
operations are treated as always having the higher value. This is
illustrated in the following pseudocode:

     if ( (MASTER_NEW_COLUMN_VALUE > SLAVE_CURRENT_COLUMN_VALUE)
             ||
           OPERATION.TYPE == "delete")
       apply_update();

This function can be used for `greatest timestamp, delete wins'
conflict resolution. This type of conflict resolution ensures that, in
the event of a conflict, the version of the row that was deleted or
(otherwise) most recently updated is the version that persists.

*Note*:

As with `NDB$MAX()', the column value from the master's `after' image
is the value used by this function.

`NDB$EPOCH()'

The `NDB$EPOCH()' function, available beginning with MySQL Cluster NDB
7.2.1, tracks the order in which replicated epochs are applied on a
slave MySQL Cluster relative to changes originating on the slave. This
relative ordering is used to determine whether changes originating on
the slave are concurrent with any changes that originate locally, and
are therefore potentially in conflict.

Most of what follows in the description of `NDB$EPOCH()' also applies to
`NDB$EPOCH_TRANS()'. Any exceptions are noted in the text.

`NDB$EPOCH()' is asymmetric, operating on one MySQL Cluster in a
two-cluster circular replication configuration (sometimes referred to
as `active-active' replication). We refer here to cluster on which it
operates as the primary, and the other as the secondary. The slave on
the primary is responsible for detecting and handling conflicts, while
the slave on the secondaryis not involved in any conflict detection or
handling.

When the slave on the primary detects conflicts, it injects events into
its own binary log to compensate for these; this ensures that the
secondary MySQL Cluster eventually realigns itself with the primary and
so keeps the primary and secondary from diverging.  This compensation
and realignment mechanism requires that the primary MySQL Cluster
always wins any conflicts with the secondary--that is, that the
primary's changes are always used rather than those from the secondary
in event of a conflict. This `primary always wins' rule has the
following implications:

   * Operations that change data, once committed on the primary, are
     fully persistent and will not be undone or rolled back by conflict
     detection and resolution.

   * Data read from the primary is fully consistent. Any changes
     committed on the Primary (locally or from the slave) will not be
     reverted later.

   * Operations that change data on the secondary may later be reverted
     if the primary determines that they are in conflict.

   * Individual rows read on the secondary are self-consistent at all
     times, each row always reflecting either a state committed by the
     secondary, or one committed by the primary.

   * Sets of rows read on the secondary may not necessarily be
     consistent at a given single point in time. For
     `NDB$EPOCH_TRANS()', this is a transient state; for `NDB$EPOCH()',
     it can be a persistent state.

   * Assuming a period of sufficient length without any conflicts, all
     data on the secondary MySQL Cluster (eventually) becomes
     consistent with the primary's data.

`NDB$EPOCH()' and `NDB$EPOCH_TRANS()' do not require any user schema
modifications, or application changes to provide conflict detection.
However, careful thought must be given to the schema used, and the
access patterns used, to verify that the complete system behaves within
specified limits.

Each of the `NDB$EPOCH()' and `NDB$EPOCH_TRANS()' functions can take an
optional parameter; this is the number of bits to use to represent the
lower 32 bits of the epoch, and should be set to no less than

     CEIL( LOG2( `TimeBetweenGlobalCheckpoints' / `TimeBetweenEpochs' ), 1)

For the default values of these configuration parameters (2000 and 100
milliseconds, respectively), this gives a value of 5 bits, so the
default value (6) should be sufficient, unless other values are used for
`TimeBetweenGlobalCheckpoints', `TimeBetweenEpochs', or both. A value
that is too small can result in false positives, while one that is too
large could lead to excessive wasted space in the database.

Both `NDB$EPOCH()' and `NDB$EPOCH_TRANS()' insert entries for
conflicting rows into the relevant exceptions tables, provided that
these tables have been defined according to the same exception table
schema rules as described elsewhere in this section (see *Note
mysql-cluster-replication-ndb-old::).  Note that you need to create any
exception table before creating the table with which it is to be used.

As with the other conflict detection functions discussed in this
section, `NDB$EPOCH()' and `NDB$EPOCH_TRANS()' are activated by
including relevant entries in the `mysql.ndb_replication' table (see
*Note mysql-cluster-ndb-replication-table::).  The roles of the primary
and secondary MySQL Clusters in this scenario are fully determined by
`mysql.ndb_replication' table entries.

*Note*:

Because the conflict detection algorithms employed by `NDB$EPOCH()' and
`NDB$EPOCH_TRANS()' are asymmetric, you must use different values for
the primary slave's and secondary slave's `server_id' entries.

`NDB$EPOCH()' and `NDB$EPOCH_TRANS()' status variables

MySQL Cluster NDB 7.2.1 introduces several status variables that can be
used to monitor `NDB$EPOCH()' and `NDB$EPOCH_TRANS()' conflict
detection. You can see how many rows have been found in conflict by
`NDB$EPOCH()' since this slave was last restarted from the current
value of the `Ndb_conflict_fn_epoch' system status variable.

`Ndb_conflict_fn_epoch_trans' provides the number of rows that have
been found directly in conflict by `NDB$EPOCH_TRANS()'; the number of
rows actually realigned, including those affected due to their
membership in or dependency on the same transactions as other
conflicting rows, is given by `Ndb_conflict_trans_row_reject_count'.

For more information, see *Note mysql-cluster-status-variables::.

Limitations on `NDB$EPOCH()'

The following limitations currently apply when using `NDB$EPOCH()' to
perform conflict detection:

   * Conflicts are detected using MySQL Cluster epoch boundaries, with
     granularity proportional to `TimeBetweenEpochs' (default: 100
     milliseconds). The minimum conflict window is the minimum time
     during which concurrent updates to the same data on both clusters
     always report a conflict. This is always a nonzero length of time,
     and is roughly proportional to `2 * (latency + queueing +
     TimeBetweenEpochs)'. This implies that--assuming the default for
     `TimeBetweenEpochs' and ignoring any latency between clusters (as
     well as any queuing delays)--the minimum conflict window size is
     approximately 200 milliseconds. This minimum window should be
     considered when looking at expected application `race' patterns.

   * Additional storage is required for tables using the `NDB$EPOCH()'
     and `NDB$EPOCH_TRANS()' functions; from 1 to 32 bits extra space
     per row is required, depending on the value passed to the function.

   * Conflicts between delete operations may result in divergence
     between the primary and secondary. When a row is deleted on both
     clusters concurrently, the conflict can be detected, but is not
     recorded, since the row is deleted. This means that further
     conflicts during the propagation of any subsequent realignment
     operations will not be detected, which can lead to divergence.

     Deletes should be externally serialized, or routed to one cluster
     only. Alternatively, a separate row should be updated
     transactionally with such deletes and any inserts that follow
     them, so that conflicts can be tracked across row deletes.  This
     may require changes in applications.

   * Only two MySQL Clusters in a circular `active-active'
     configuration are currently supported when using `NDB$EPOCH()' or
     `NDB$EPOCH_TRANS()' for conflict detection.

   * Tables having *Note `BLOB': blob. or *Note `TEXT': blob. columns
     are not currently supported with `NDB$EPOCH()' or
     `NDB$EPOCH_TRANS()'.

`NDB$EPOCH_TRANS()'

`NDB$EPOCH_TRANS()' extends the `NDB$EPOCH()' function, and, like
`NDB$EPOCH()', is available beginning with MySQL Cluster NDB 7.2.1.
Conflicts are detected and handled in the same way using the `primary
wins all' rule (see *Note mysql-cluster-replication-ndb-epoch::) but
with the extra condition that any other rows updated in the same
transaction in which the conflict occurred are also regarded as being
in conflict. In other words, where `NDB$EPOCH()' realigns individual
conflicting rows on the secondary, `NDB$EPOCH_TRANS()' realigns
conflicting transactions.

In addition, any transactions which are detectably dependent on a
conflicting transaction are also regarded as being in conflict, these
dependencies being determined by the contents of the secondary
cluster's binary log. Since the binary log contains only data
modification operations (inserts, updates, and deletes), only
overlapping data modifications are used to determine dependencies
between transactions.

`NDB$EPOCH_TRANS()' is subject to the same conditions and limitations
as `NDB$EPOCH()', and in addition requires that Version 2 binary log
row events are used (`--log-bin-use-v1-row-events' equal to 0), which
adds a storage overhead of 2 bytes per event in the binary log. In
addition, all transaction IDs must be recorded in the secondary's
binary log (`--ndb-log-transaction-id' option), which adds a further
variable overhead (up to 13 bytes per row).

See *Note mysql-cluster-replication-ndb-epoch::.

`NULL'

Indicates that conflict resolution is not to be used for the
corresponding table.

Status information

A server status variable `Ndb_conflict_fn_max' provides a count of the
number of times that a row was not applied on the current SQL node due
to `greatest timestamp wins' conflict resolution since the last time
that *Note `mysqld': mysqld. was started.

The number of times that a row was not applied as the result of `same
timestamp wins' conflict resolution on a given *Note `mysqld': mysqld.
since the last time it was restarted is given by the global status
variable `Ndb_conflict_fn_old'. In addition to incrementing
`Ndb_conflict_fn_old', the primary key of the row that was not used is
inserted into an _exceptions table_, as explained later in this section.

Exceptions table

To use the `NDB$OLD()' conflict resolution function, it is also
necessary to create an exceptions table corresponding to each *Note
`NDB': mysql-cluster. table for which this type of conflict resolution
is to be employed. This is also true when using `NDB$EPOCH()' or
`NDB$EPOCH_TRANS()' in MySQL Cluster NDB 7.2.1 and later. The name of
this table is that of the table for which conflict resolution is to be
applied, with the string `$EX' appended. (For example, if the name of
the original table is `mytable', the name of the corresponding
exception table name should be `mytable$EX'.) This table is created as
follows:

     CREATE TABLE ORIGINAL_TABLE$EX  (
         server_id INT UNSIGNED,
         master_server_id INT UNSIGNED,
         master_epoch BIGINT UNSIGNED,
         count INT UNSIGNED,
         ORIGINAL_TABLE_PK_COLUMNS,
         [ADDITIONAL_COLUMNS,]
         PRIMARY KEY(server_id, master_server_id, master_epoch, count)
     ) ENGINE=NDB;

The first four columns are required. Following these columns, the
columns making up the original table's primary key should be copied in
the order in which they are used to define the primary key of the
original table.

*Note*:

The names of the first four columns and the columns matching the
original table's primary key columns are not critical; however, we
suggest for reasons of clarity and consistency, that you use the names
shown here for the `server_id', `master_server_id', `master_epoch', and
`count' columns, and that you use the same names as in the original
table for the columns matching those in the original table's primary
key.

The data types for the columns duplicating the primary key columns of
the original table should be the same as for (or larger than) the
original columns.

Additional columns may optionally be defined following these columns,
but not before any of them; any such extra columns cannot be `NOT
NULL'. The exception table's primary key must be defined as shown. The
exception table must use the *Note `NDB': mysql-cluster. storage
engine. An example that uses `NDB$OLD()' with an exceptions table is
shown later in this section.

*Important*:

The `mysql.ndb_replication' table is read when a data table is set up
for replication, so the row corresponding to a table to be replicated
must be inserted into `mysql.ndb_replication' _before_ the table to be
replicated is created.

Examples

The following examples assume that you have already a working MySQL
Cluster replication setup, as described in *Note
mysql-cluster-replication-preparation::, and *Note
mysql-cluster-replication-starting::.

   * `NDB$MAX()' example

     Suppose you wish to enable `greatest timestamp wins' conflict
     resolution on table `test.t1', using column `mycol' as the
     `timestamp'.  This can be done using the following steps:

       1. Make sure that you have started the master *Note `mysqld':
          mysqld. with `--ndb-log-update-as-write=OFF'.

       2. On the master, perform this *Note `INSERT': insert. statement:

               INSERT INTO mysql.ndb_replication
                   VALUES ('test', 't1', 0, NULL, 'NDB$MAX(mycol)');

          Inserting a 0 into the `server_id' indicates that all SQL
          nodes accessing this table should use conflict resolution. If
          you want to use conflict resolution on a specific *Note
          `mysqld': mysqld. only, use the actual server ID.

          Inserting `NULL' into the `binlog_type' column has the same
          effect as inserting 0 (`NBT_DEFAULT'); the server default is
          used.

       3. Create the `test.t1' table:

               CREATE TABLE test.t1 (
                   COLUMNS
                   mycol INT UNSIGNED,
                   COLUMNS
               ) ENGINE=NDB;

          Now, when updates are done on this table, conflict resolution
          is applied, and the version of the row having the greatest
          value for `mycol' is written to the slave.

     *Note*:

     Other `binlog_type' options--such as `NBT_UPDATED_ONLY_USE_UPDATE'
     should be used to control logging on the master using the
     `ndb_replication' table rather than by using command-line options.

   * `NDB$OLD()' example

     Suppose an *Note `NDB': mysql-cluster. table such as the one
     defined here is being replicated, and you wish to enable `same
     timestamp wins' conflict resolution for updates to this table:

          CREATE TABLE test.t2  (
              a INT UNSIGNED NOT NULL,
              b CHAR(25) NOT NULL,
              COLUMNS,
              mycol INT UNSIGNED NOT NULL,
              COLUMNS,
              PRIMARY KEY pk (a, b)
          )   ENGINE=NDB;

     The following steps are required, in the order shown:

       1. First--and _prior_ to creating `test.t2'--you must insert a
          row into the `mysql.ndb_replication' table, as shown here:

               INSERT INTO mysql.ndb_replication
                   VALUES ('test', 't2', 0, NULL, 'NDB$OLD(mycol)');

          Possible values for the `binlog_type' column are shown
          earlier in this section. The value `'NDB$OLD(mycol)'' should
          be inserted into the `conflict_fn' column.

       2. Create an appropriate exceptions table for `test.t2'. The
          table creation statement shown here includes all required
          columns; any additional columns must be declared following
          these columns, and before the definition of the table's
          primary key.

               CREATE TABLE test.t2$EX  (
                   server_id SMALLINT UNSIGNED,
                   master_server_id INT UNSIGNED,
                   master_epoch BIGINT UNSIGNED,
                   count BIGINT UNSIGNED,
                   a INT UNSIGNED NOT NULL,
                   b CHAR(25) NOT NULL,
                   [ADDITIONAL_COLUMNS,]
                   PRIMARY KEY(server_id, master_server_id, master_epoch, count)
               )   ENGINE=NDB;

       3. Create the table `test.t2' as shown previously.

     These steps must be followed for every table for which you wish to
     perform conflict resolution using `NDB$OLD()'. For each such
     table, there must be a corresponding row in
     `mysql.ndb_replication', and there must be an exceptions table in
     the same database as the table being replicated.


File: manual.info,  Node: mysql-cluster-news,  Prev: mysql-cluster-replication,  Up: mysql-cluster

17.7 MySQL Cluster Release Notes
================================

MySQL Cluster release notes are no longer published in the MySQL
Reference Manual.

Release notes for the changes in each release of MySQL Cluster are
located at MySQL Cluster 7.2 Release Notes
(http://dev.mysql.com/doc/relnotes/mysql-cluster/7.2/en/).


File: manual.info,  Node: partitioning,  Next: stored-programs-views,  Prev: mysql-cluster,  Up: Top

18 Partitioning
***************

* Menu:

* partitioning-overview::        Overview of Partitioning in MySQL
* partitioning-types::           Partitioning Types
* partitioning-management::      Partition Management
* partitioning-pruning::         Partition Pruning
* partitioning-limitations::     Restrictions and Limitations on Partitioning

This chapter discusses MySQL's implementation of _user-defined
partitioning_. You can determine whether your MySQL Server supports
partitioning by means of a *Note `SHOW VARIABLES': show-variables.
statement such as this one:

     mysql> SHOW VARIABLES LIKE '%partition%';

     +-------------------+-------+
     | Variable_name     | Value |
     +-------------------+-------+
     | have_partitioning | YES   |
     +-------------------+-------+
     1 row in set (0.00 sec)

*Note*:

The `have_partitioning' variable is deprecated, and removed in MySQL
5.6.1.

You can also check the output of the *Note `SHOW PLUGINS':
show-plugins. statement, as shown here:

     mysql> SHOW PLUGINS;
     +------------+----------+----------------+---------+---------+
     | Name       | Status   | Type           | Library | License |
     +------------+----------+----------------+---------+---------+
     | binlog     | ACTIVE   | STORAGE ENGINE | NULL    | GPL     |
     *| partition  | ACTIVE   | STORAGE ENGINE | NULL    | GPL     |*
     | ARCHIVE    | ACTIVE   | STORAGE ENGINE | NULL    | GPL     |
     | BLACKHOLE  | ACTIVE   | STORAGE ENGINE | NULL    | GPL     |
     | CSV        | ACTIVE   | STORAGE ENGINE | NULL    | GPL     |
     | FEDERATED  | DISABLED | STORAGE ENGINE | NULL    | GPL     |
     | MEMORY     | ACTIVE   | STORAGE ENGINE | NULL    | GPL     |
     | InnoDB     | ACTIVE   | STORAGE ENGINE | NULL    | GPL     |
     | MRG_MYISAM | ACTIVE   | STORAGE ENGINE | NULL    | GPL     |
     | MyISAM     | ACTIVE   | STORAGE ENGINE | NULL    | GPL     |
     | ndbcluster | DISABLED | STORAGE ENGINE | NULL    | GPL     |
     +------------+----------+----------------+---------+---------+
     11 rows in set (0.00 sec)

You can also check the *Note `INFORMATION_SCHEMA.PLUGINS':
plugins-table. table with a query similar to this one:

     mysql> SELECT
         ->     PLUGIN_NAME as Name,
         ->     PLUGIN_VERSION as Version,
         ->     PLUGIN_STATUS as Status
         -> FROM INFORMATION_SCHEMA.PLUGINS
         -> WHERE PLUGIN_TYPE='STORAGE ENGINE';
     +--------------------+---------+--------+
     | Name               | Version | Status |
     +--------------------+---------+--------+
     | binlog             | 1.0     | ACTIVE |
     | CSV                | 1.0     | ACTIVE |
     | MEMORY             | 1.0     | ACTIVE |
     | MRG_MYISAM         | 1.0     | ACTIVE |
     | MyISAM             | 1.0     | ACTIVE |
     | PERFORMANCE_SCHEMA | 0.1     | ACTIVE |
     | BLACKHOLE          | 1.0     | ACTIVE |
     | ARCHIVE            | 3.0     | ACTIVE |
     | InnoDB             | 5.6     | ACTIVE |
     *| partition          | 1.0     | ACTIVE |*
     +--------------------+---------+--------+
     10 rows in set (0.00 sec)

In either case, if you do not see the `partition' plugin listed with
the value `ACTIVE' for the `Status' column in the output (shown in bold
text in each of the examples just given), then your version of MySQL was
not built with partitioning support.

MySQL 5.5 Community binaries provided by Oracle include partitioning
support. For information about partitioning support offered in
commercial MySQL Server binaries, see `MySQL Enterprise Server 5.1' on
the MySQL Web site at
http://www.mysql.com/products/enterprise/server.html.

To enable partitioning if you are compiling MySQL 5.5 from source, the
build must be configured with the `-DWITH_PARTITION_STORAGE_ENGINE'
option. For more information about building MySQL, see *Note
source-installation::.

If your MySQL binary is built with partitioning support, nothing
further needs to be done to enable it (for example, no special entries
are required in your `my.cnf' file).

If you want to disable partitioning support, you can start the MySQL
Server with the `--skip-partition' option, in which case the value of
`have_partitioning' is `DISABLED'. When partitioning support is
disabled, you can see any existing partitioned tables and drop them
(although doing this is not advised), but you cannot otherwise
manipulate them or access their data.

An introduction to partitioning and partitioning concepts may be found
in *Note partitioning-overview::.

MySQL supports several types of partitioning, which are discussed in
*Note partitioning-types::, as well as subpartitioning, which is
described in *Note partitioning-subpartitions::.

Methods of adding, removing, and altering partitions in existing
partitioned tables are covered in *Note partitioning-management::.

Table maintenance commands for use with partitioned tables are
discussed in *Note partitioning-maintenance::.

The *Note `PARTITIONS': partitions-table. table in the
`INFORMATION_SCHEMA' database provides information about partitions and
partitioned tables. See *Note partitions-table::, for more information;
for some examples of queries against this table, see *Note
partitioning-handling-nulls::.

For known issues with partitioning in MySQL 5.5, see *Note
partitioning-limitations::.

You may also find the following resources to be useful when working
with partitioned tables.

Additional Resources

Other sources of information about user-defined partitioning in MySQL
include the following:

   * MySQL Partitioning Forum (http://forums.mysql.com/list.php?106)

     This is the official discussion forum for those interested in or
     experimenting with MySQL Partitioning technology. It features
     announcements and updates from MySQL developers and others. It is
     monitored by members of the Partitioning Development and
     Documentation Teams.

   * Mikael Ronstro"m's Blog (http://mikaelronstrom.blogspot.com/)

     MySQL Partitioning Architect and Lead Developer Mikael Ronstro"m
     frequently posts articles here concerning his work with MySQL
     Partitioning and MySQL Cluster.

   * PlanetMySQL (http://www.planetmysql.org/)

     A MySQL news site featuring MySQL-related blogs, which should be
     of interest to anyone using my MySQL. We encourage you to check
     here for links to blogs kept by those working with MySQL
     Partitioning, or to have your own blog added to those covered.

MySQL 5.5 binaries are available from
`http://dev.mysql.com/downloads/mysql/5.5.html'.  However, for the
latest partitioning bugfixes and feature additions, you can obtain the
source from our Bazaar repository. To enable partitioning, the build
must be configured with the `-DWITH_PARTITION_STORAGE_ENGINE' option.
For more information about building MySQL, see *Note
source-installation::. If you have problems compiling a
partitioning-enabled MySQL 5.5 build, check the MySQL Partitioning
Forum (http://forums.mysql.com/list.php?106) and ask for assistance
there if you do not find a solution to your problem already posted.


File: manual.info,  Node: partitioning-overview,  Next: partitioning-types,  Prev: partitioning,  Up: partitioning

18.1 Overview of Partitioning in MySQL
======================================

This section provides a conceptual overview of partitioning in MySQL
5.5.

For information on partitioning restrictions and feature limitations,
see *Note partitioning-limitations::.

The SQL standard does not provide much in the way of guidance regarding
the physical aspects of data storage. The SQL language itself is
intended to work independently of any data structures or media
underlying the schemas, tables, rows, or columns with which it works.
Nonetheless, most advanced database management systems have evolved
some means of determining the physical location to be used for storing
specific pieces of data in terms of the file system, hardware or even
both. In MySQL, the `InnoDB' storage engine has long supported the
notion of a tablespace, and the MySQL Server, even prior to the
introduction of partitioning, could be configured to employ different
physical directories for storing different databases (see *Note
symbolic-links::, for an explanation of how this is done).

_Partitioning_ takes this notion a step further, by enabling you to
distribute portions of individual tables across a file system according
to rules which you can set largely as needed. In effect, different
portions of a table are stored as separate tables in different
locations. The user-selected rule by which the division of data is
accomplished is known as a _partitioning function_, which in MySQL can
be the modulus, simple matching against a set of ranges or value lists,
an internal hashing function, or a linear hashing function. The
function is selected according to the partitioning type specified by
the user, and takes as its parameter the value of a user-supplied
expression. This expression can be a column value, a function acting on
one or more column values, or a set of one or more column values,
depending on the type of partitioning that is used.

In the case of `RANGE', `LIST', and [`LINEAR'] `HASH' partitioning, the
value of the partitioning column is passed to the partitioning
function, which returns an integer value representing the number of the
partition in which that particular record should be stored. This
function must be nonconstant and nonrandom. It may not contain any
queries, but may use an SQL expression that is valid in MySQL, as long
as that expression returns either `NULL' or an integer INTVAL such that

     -MAXVALUE <= INTVAL <= MAXVALUE

(`MAXVALUE' is used to represent the least upper bound for the type of
integer in question.  `-MAXVALUE' represents the greatest lower bound.)

For [`LINEAR'] `KEY', `RANGE COLUMNS', and `LIST COLUMNS' partitioning,
the partitioning expression consists of a list of one or more columns.

For [`LINEAR'] `KEY' partitioning, the partitioning function is
supplied by MySQL.

For more information about permitted partitioning column types and
partitioning functions, see *Note partitioning-types::, as well as
*Note create-table::, which provides partitioning syntax descriptions
and additional examples. For information about restrictions on
partitioning functions, see *Note partitioning-limitations-functions::.

This is known as _horizontal partitioning_--that is, different rows of
a table may be assigned to different physical partitions. MySQL 5.5
does not support _vertical partitioning_, in which different columns of
a table are assigned to different physical partitions. There are not at
this time any plans to introduce vertical partitioning into MySQL 5.5.

For information about determining whether your MySQL Server binary
supports user-defined partitioning, see *Note partitioning::.

For creating partitioned tables, you can use most storage engines that
are supported by your MySQL server; the MySQL partitioning engine runs
in a separate layer and can interact with any of these. In MySQL 5.5,
all partitions of the same partitioned table must use the same storage
engine; for example, you cannot use `MyISAM' for one partition and
`InnoDB' for another. However, there is nothing preventing you from
using different storage engines for different partitioned tables on the
same MySQL server or even in the same database.

MySQL partitioning cannot be used with the `MERGE', `CSV', or
`FEDERATED' storage engines.

Partitioning by `KEY' or `LINEAR KEY' is possible with *Note
`NDBCLUSTER': mysql-cluster, but other types of user-defined
partitioning are not supported for tables using this storage engine. In
addition, an *Note `NDBCLUSTER': mysql-cluster. table that employs
user-defined partitioning must have an explicit primary key, and any
columns referenced in the table's partitioning expression must be part
of the primary key. However, if no columns are listed in the `PARTITION
BY KEY' or `PARTITION BY LINEAR KEY' clause of the *Note `CREATE
TABLE': create-table. or *Note `ALTER TABLE':
alter-table-partition-operations. statement used to create or modify a
user-partitioned *Note `NDBCLUSTER': mysql-cluster. table, then the
table is not required to have an explicit primary key.  For more
information, see *Note mysql-cluster-limitations-syntax::.

To employ a particular storage engine for a partitioned table, it is
necessary only to use the `[STORAGE] ENGINE' option just as you would
for a nonpartitioned table. However, you should keep in mind that
`[STORAGE] ENGINE' (and other table options) need to be listed _before_
any partitioning options are used in a *Note `CREATE TABLE':
create-table. statement. This example shows how to create a table that
is partitioned by hash into 6 partitions and which uses the `InnoDB'
storage engine:

     CREATE TABLE ti (id INT, amount DECIMAL(7,2), tr_date DATE)
         ENGINE=INNODB
         PARTITION BY HASH( MONTH(tr_date) )
         PARTITIONS 6;

Each `PARTITION' clause can include a `[STORAGE] ENGINE' option, but in
MySQL 5.5 this has no effect.

*Important*:

Partitioning applies to all data and indexes of a table; you cannot
partition only the data and not the indexes, or _vice versa_, nor can
you partition only a portion of the table.

Data and indexes for each partition can be assigned to a specific
directory using the `DATA DIRECTORY' and `INDEX DIRECTORY' options for
the `PARTITION' clause of the *Note `CREATE TABLE': create-table.
statement used to create the partitioned table.

The `DATA DIRECTORY' and `INDEX DIRECTORY' options have no effect when
defining partitions for tables using the `InnoDB' storage engine.

`DATA DIRECTORY' and `INDEX DIRECTORY' are not supported for individual
partitions or subpartitions on Windows. These options are ignored on
Windows, except that a warning is generated.

In addition, `MAX_ROWS' and `MIN_ROWS' can be used to determine the
maximum and minimum numbers of rows, respectively, that can be stored in
each partition. The `MAX_ROWS' option can be useful for causing MySQL
Cluster tables to be created with extra partitions, thus allowing for
greater storage of hash indexes. See the documentation for the
`DataMemory' data node configuration parameter, as well as *Note
mysql-cluster-nodes-groups::, for more information.

Some advantages of partitioning are listed here:

   * Partitioning makes it possible to store more data in one table
     than can be held on a single disk or file system partition.

   * Data that loses its usefulness can often be easily removed from a
     partitioned table by dropping the partition (or partitions)
     containing only that data. Conversely, the process of adding new
     data can in some cases be greatly facilitated by adding one or
     more new partitions for storing specifically that data.

   * Some queries can be greatly optimized in virtue of the fact that
     data satisfying a given `WHERE' clause can be stored only on one
     or more partitions, which automatically excluding any remaining
     partitions from the search. Because partitions can be altered
     after a partitioned table has been created, you can reorganize
     your data to enhance frequent queries that may not have been often
     used when the partitioning scheme was first set up. This ability to
     exclude non-matching partitions (and thus any rows they contain)
     is often referred to as _partition pruning_. For more information,
     see *Note partitioning-pruning::.

Other benefits usually associated with partitioning include those in
the following list. These features are not currently implemented in
MySQL Partitioning, but are high on our list of priorities.

   * Queries involving aggregate functions such as `SUM()' and
     `COUNT()' can easily be parallelized. A simple example of such a
     query might be `SELECT salesperson_id, COUNT(orders) as order_total
     FROM sales GROUP BY salesperson_id;'. By `parallelized,' we mean
     that the query can be run simultaneously on each partition, and
     the final result obtained merely by summing the results obtained
     for all partitions.

   * Achieving greater query throughput in virtue of spreading data
     seeks over multiple disks.

Be sure to check this section and chapter frequently for updates as
MySQL Partitioning development continues.


File: manual.info,  Node: partitioning-types,  Next: partitioning-management,  Prev: partitioning-overview,  Up: partitioning

18.2 Partitioning Types
=======================

* Menu:

* partitioning-range::           `RANGE' Partitioning
* partitioning-list::            `LIST' Partitioning
* partitioning-columns::         `COLUMNS' Partitioning
* partitioning-hash::            `HASH' Partitioning
* partitioning-key::             `KEY' Partitioning
* partitioning-subpartitions::   Subpartitioning
* partitioning-handling-nulls::  How MySQL Partitioning Handles `NULL'

This section discusses the types of partitioning which are available in
MySQL 5.5. These include the types listed here:

   * `RANGE' partitioning

     This type of partitioning assigns rows to partitions based on
     column values falling within a given range. See *Note
     partitioning-range::. MySQL 5.5 adds an extension, `RANGE
     COLUMNS', to this type.  See *Note partitioning-columns-range::.

   * `LIST' partitioning

     Similar to partitioning by `RANGE', except that the partition is
     selected based on columns matching one of a set of discrete
     values. See *Note partitioning-list::. MySQL 5.5 adds an
     extension, `LIST COLUMNS', to this type.  See *Note
     partitioning-columns-list::.

   * `HASH' partitioning

     With this type of partitioning, a partition is selected based on
     the value returned by a user-defined expression that operates on
     column values in rows to be inserted into the table. The function
     may consist of any expression valid in MySQL that yields a
     nonnegative integer value. An extension to this type, `LINEAR
     HASH', is also available. See *Note partitioning-hash::.

   * `KEY' partitioning

     This type of partitioning is similar to partitioning by `HASH',
     except that only one or more columns to be evaluated are supplied,
     and the MySQL server provides its own hashing function. These
     columns can contain other than integer values, since the hashing
     function supplied by MySQL guarantees an integer result regardless
     of the column data type. An extension to this type, `LINEAR KEY',
     is also available. See *Note partitioning-key::.

A very common use of database partitioning is to segregate data by
date. Some database systems support explicit date partitioning, which
MySQL does not implement in 5.5. However, it is not difficult in MySQL
to create partitioning schemes based on *Note `DATE': datetime, *Note
`TIME': time, or *Note `DATETIME': datetime. columns, or based on
expressions making use of such columns.

When partitioning by `KEY' or `LINEAR KEY', you can use a *Note `DATE':
datetime, *Note `TIME': time, or *Note `DATETIME': datetime. column as
the partitioning column without performing any modification of the
column value.  For example, this table creation statement is perfectly
valid in MySQL:

     CREATE TABLE members (
         firstname VARCHAR(25) NOT NULL,
         lastname VARCHAR(25) NOT NULL,
         username VARCHAR(16) NOT NULL,
         email VARCHAR(35),
         joined DATE NOT NULL
     )
     PARTITION BY KEY(joined)
     PARTITIONS 6;

In MySQL 5.5, it is also possible to use a *Note `DATE': datetime. or
*Note `DATETIME': datetime. column as the partitioning column using
`RANGE COLUMNS' and `LIST COLUMNS' partitioning.

MySQL's other partitioning types, however, require a partitioning
expression that yields an integer value or `NULL'. If you wish to use
date-based partitioning by `RANGE', `LIST', `HASH', or `LINEAR HASH',
you can simply employ a function that operates on a *Note `DATE':
datetime, *Note `TIME': time, or *Note `DATETIME': datetime. column and
returns such a value, as shown here:

     CREATE TABLE members (
         firstname VARCHAR(25) NOT NULL,
         lastname VARCHAR(25) NOT NULL,
         username VARCHAR(16) NOT NULL,
         email VARCHAR(35),
         joined DATE NOT NULL
     )
     PARTITION BY RANGE( YEAR(joined) ) (
         PARTITION p0 VALUES LESS THAN (1960),
         PARTITION p1 VALUES LESS THAN (1970),
         PARTITION p2 VALUES LESS THAN (1980),
         PARTITION p3 VALUES LESS THAN (1990),
         PARTITION p4 VALUES LESS THAN MAXVALUE
     );

Additional examples of partitioning using dates may be found in the
following sections of this chapter:

   * *Note partitioning-range::

   * *Note partitioning-hash::

   * *Note partitioning-linear-hash::

For more complex examples of date-based partitioning, see the following
sections:

   * *Note partitioning-pruning::

   * *Note partitioning-subpartitions::

MySQL partitioning is optimized for use with the `TO_DAYS()', `YEAR()',
and `TO_SECONDS()' functions. However, you can use other date and time
functions that return an integer or `NULL', such as `WEEKDAY()',
`DAYOFYEAR()', or `MONTH()'. See *Note date-and-time-functions::, for
more information about such functions.

It is important to remember--regardless of the type of partitioning
that you use--that partitions are always numbered automatically and in
sequence when created, starting with `0'. When a new row is inserted
into a partitioned table, it is these partition numbers that are used in
identifying the correct partition. For example, if your table uses 4
partitions, these partitions are numbered `0', `1', `2', and `3'. For
the `RANGE' and `LIST' partitioning types, it is necessary to ensure
that there is a partition defined for each partition number. For `HASH'
partitioning, the user function employed must return an integer value
greater than `0'. For `KEY' partitioning, this issue is taken care of
automatically by the hashing function which the MySQL server employs
internally.

Names of partitions generally follow the rules governing other MySQL
identifiers, such as those for tables and databases.  However, you
should note that partition names are not case-sensitive. For example,
the following *Note `CREATE TABLE': create-table. statement fails as
shown:

     mysql> CREATE TABLE t2 (val INT)
         -> PARTITION BY LIST(val)(
         ->     PARTITION mypart VALUES IN (1,3,5),
         ->     PARTITION MyPart VALUES IN (2,4,6)
         -> );
     ERROR 1488 (HY000): Duplicate partition name mypart

Failure occurs because MySQL sees no difference between the partition
names `mypart' and `MyPart'.

When you specify the number of partitions for the table, this must be
expressed as a positive, nonzero integer literal with no leading zeros,
and may not be an expression such as `0.8E+01' or `6-2', even if it
evaluates to an integer value. Decimal fractions are not permitted.

In the sections that follow, we do not necessarily provide all possible
forms for the syntax that can be used for creating each partition type;
this information may be found in *Note create-table::.


File: manual.info,  Node: partitioning-range,  Next: partitioning-list,  Prev: partitioning-types,  Up: partitioning-types

18.2.1 `RANGE' Partitioning
---------------------------

A table that is partitioned by range is partitioned in such a way that
each partition contains rows for which the partitioning expression
value lies within a given range. Ranges should be contiguous but not
overlapping, and are defined using the `VALUES LESS THAN' operator. For
the next few examples, suppose that you are creating a table such as the
following to hold personnel records for a chain of 20 video stores,
numbered 1 through 20:

     CREATE TABLE employees (
         id INT NOT NULL,
         fname VARCHAR(30),
         lname VARCHAR(30),
         hired DATE NOT NULL DEFAULT '1970-01-01',
         separated DATE NOT NULL DEFAULT '9999-12-31',
         job_code INT NOT NULL,
         store_id INT NOT NULL
     );

This table can be partitioned by range in a number of ways, depending
on your needs. One way would be to use the `store_id' column. For
instance, you might decide to partition the table 4 ways by adding a
`PARTITION BY RANGE' clause as shown here:

     CREATE TABLE employees (
         id INT NOT NULL,
         fname VARCHAR(30),
         lname VARCHAR(30),
         hired DATE NOT NULL DEFAULT '1970-01-01',
         separated DATE NOT NULL DEFAULT '9999-12-31',
         job_code INT NOT NULL,
         store_id INT NOT NULL
     )
     PARTITION BY RANGE (store_id) (
         PARTITION p0 VALUES LESS THAN (6),
         PARTITION p1 VALUES LESS THAN (11),
         PARTITION p2 VALUES LESS THAN (16),
         PARTITION p3 VALUES LESS THAN (21)
     );

In this partitioning scheme, all rows corresponding to employees
working at stores 1 through 5 are stored in partition `p0', to those
employed at stores 6 through 10 are stored in partition `p1', and so
on. Note that each partition is defined in order, from lowest to
highest.  This is a requirement of the `PARTITION BY RANGE' syntax; you
can think of it as being analogous to a series of `if ... elseif ...'
statements in C or Java in this regard.

It is easy to determine that a new row containing the data `(72,
'Michael', 'Widenius', '1998-06-25', NULL, 13)' is inserted into
partition `p2', but what happens when your chain adds a 21^st store?
Under this scheme, there is no rule that covers a row whose `store_id'
is greater than 20, so an error results because the server does not
know where to place it. You can keep this from occurring by using a
`catchall' `VALUES LESS THAN' clause in the *Note `CREATE TABLE':
create-table. statement that provides for all values greater than the
highest value explicitly named:

     CREATE TABLE employees (
         id INT NOT NULL,
         fname VARCHAR(30),
         lname VARCHAR(30),
         hired DATE NOT NULL DEFAULT '1970-01-01',
         separated DATE NOT NULL DEFAULT '9999-12-31',
         job_code INT NOT NULL,
         store_id INT NOT NULL
     )
     PARTITION BY RANGE (store_id) (
         PARTITION p0 VALUES LESS THAN (6),
         PARTITION p1 VALUES LESS THAN (11),
         PARTITION p2 VALUES LESS THAN (16),
         _PARTITION p3 VALUES LESS THAN MAXVALUE_
     );

*Note*:

Another way to avoid an error when no matching value is found is to use
the `IGNORE' keyword as part of the *Note `INSERT': insert. statement.
For an example, see *Note partitioning-list::. Also see *Note insert::,
for general information about `IGNORE'.

`MAXVALUE' represents an integer value that is always greater than the
largest possible integer value (in mathematical language, it serves as
a _least upper bound_). Now, any rows whose `store_id' column value is
greater than or equal to 16 (the highest value defined) are stored in
partition `p3'. At some point in the future--when the number of stores
has increased to 25, 30, or more--you can use an *Note `ALTER TABLE':
alter-table-partition-operations. statement to add new partitions for
stores 21-25, 26-30, and so on (see *Note partitioning-management::,
for details of how to do this).

In much the same fashion, you could partition the table based on
employee job codes--that is, based on ranges of `job_code' column
values. For example--assuming that two-digit job codes are used for
regular (in-store) workers, three-digit codes are used for office and
support personnel, and four-digit codes are used for management
positions--you could create the partitioned table using the following
statement:

     CREATE TABLE employees (
         id INT NOT NULL,
         fname VARCHAR(30),
         lname VARCHAR(30),
         hired DATE NOT NULL DEFAULT '1970-01-01',
         separated DATE NOT NULL DEFAULT '9999-12-31',
         job_code INT NOT NULL,
         store_id INT NOT NULL
     )
     PARTITION BY RANGE (job_code) (
         PARTITION p0 VALUES LESS THAN (100),
         PARTITION p1 VALUES LESS THAN (1000),
         PARTITION p2 VALUES LESS THAN (10000)
     );

In this instance, all rows relating to in-store workers would be stored
in partition `p0', those relating to office and support staff in `p1',
and those relating to managers in partition `p2'.

It is also possible to use an expression in `VALUES LESS THAN' clauses.
However, MySQL must be able to evaluate the expression's return value
as part of a `LESS THAN' (`<') comparison.

Rather than splitting up the table data according to store number, you
can use an expression based on one of the two *Note `DATE': datetime.
columns instead. For example, let us suppose that you wish to partition
based on the year that each employee left the company; that is, the
value of `YEAR(separated)'. An example of a *Note `CREATE TABLE':
create-table. statement that implements such a partitioning scheme is
shown here:

     CREATE TABLE employees (
         id INT NOT NULL,
         fname VARCHAR(30),
         lname VARCHAR(30),
         hired DATE NOT NULL DEFAULT '1970-01-01',
         separated DATE NOT NULL DEFAULT '9999-12-31',
         job_code INT,
         store_id INT
     )
     PARTITION BY RANGE ( YEAR(separated) ) (
         PARTITION p0 VALUES LESS THAN (1991),
         PARTITION p1 VALUES LESS THAN (1996),
         PARTITION p2 VALUES LESS THAN (2001),
         PARTITION p3 VALUES LESS THAN MAXVALUE
     );

In this scheme, for all employees who left before 1991, the rows are
stored in partition `p0'; for those who left in the years 1991 through
1995, in `p1'; for those who left in the years 1996 through 2000, in
`p2'; and for any workers who left after the year 2000, in `p3'.

It is also possible to partition a table by `RANGE', based on the value
of a *Note `TIMESTAMP': datetime. column, using the `UNIX_TIMESTAMP()'
function, as shown in this example:

     CREATE TABLE quarterly_report_status (
         report_id INT NOT NULL,
         report_status VARCHAR(20) NOT NULL,
         report_updated TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP
     )
     PARTITION BY RANGE ( UNIX_TIMESTAMP(report_updated) ) (
         PARTITION p0 VALUES LESS THAN ( UNIX_TIMESTAMP('2008-01-01 00:00:00') ),
         PARTITION p1 VALUES LESS THAN ( UNIX_TIMESTAMP('2008-04-01 00:00:00') ),
         PARTITION p2 VALUES LESS THAN ( UNIX_TIMESTAMP('2008-07-01 00:00:00') ),
         PARTITION p3 VALUES LESS THAN ( UNIX_TIMESTAMP('2008-10-01 00:00:00') ),
         PARTITION p4 VALUES LESS THAN ( UNIX_TIMESTAMP('2009-01-01 00:00:00') ),
         PARTITION p5 VALUES LESS THAN ( UNIX_TIMESTAMP('2009-04-01 00:00:00') ),
         PARTITION p6 VALUES LESS THAN ( UNIX_TIMESTAMP('2009-07-01 00:00:00') ),
         PARTITION p7 VALUES LESS THAN ( UNIX_TIMESTAMP('2009-10-01 00:00:00') ),
         PARTITION p8 VALUES LESS THAN ( UNIX_TIMESTAMP('2010-01-01 00:00:00') ),
         PARTITION p9 VALUES LESS THAN (MAXVALUE)
     );

Any other expressions involving *Note `TIMESTAMP': datetime. values are
not permitted. (See Bug #42849.)

Range partitioning is particularly useful when one or more of the
following conditions is true:

   * You want or need to delete `old' data. If you are using the
     partitioning scheme shown immediately above, you can simply use
     `ALTER TABLE employees DROP PARTITION p0;' to delete all rows
     relating to employees who stopped working for the firm prior to
     1991.  (See *Note alter-table::, and *Note
     partitioning-management::, for more information.) For a table with
     a great many rows, this can be much more efficient than running a
     *Note `DELETE': delete. query such as `DELETE FROM employees WHERE
     YEAR(separated) <= 1990;'.

   * You want to use a column containing date or time values, or
     containing values arising from some other series.

   * You frequently run queries that depend directly on the column used
     for partitioning the table. For example, when executing a query
     such as *Note `EXPLAIN PARTITIONS SELECT COUNT(*) FROM employees
     WHERE separated BETWEEN '2000-01-01' AND '2000-12-31' GROUP BY
     store_id;': explain, MySQL can quickly determine that only
     partition `p2' needs to be scanned because the remaining
     partitions cannot contain any records satisfying the `WHERE'
     clause. See *Note partitioning-pruning::, for more information
     about how this is accomplished.

A variant on this type of partitioning, `RANGE COLUMNS' partitioning,
was introduced in MySQL 5.5.0.  Partitioning by `RANGE COLUMNS' makes it
possible to employ multiple columns for defining partitioning ranges
that apply both to placement of rows in partitions and for determining
the inclusion or exclusion of specific partitions when performing
partition pruning. See *Note partitioning-columns-range::, for more
information.

Partitioning schemes based on time intervals

If you wish to implement a partitioning scheme based on ranges or
intervals of time in MySQL 5.5, you have two options:

  1. Partition the table by `RANGE', and for the partitioning
     expression, employ a function operating on a *Note `DATE':
     datetime, *Note `TIME': time, or *Note `DATETIME': datetime.
     column and returning an integer value, as shown here:

          CREATE TABLE members (
              firstname VARCHAR(25) NOT NULL,
              lastname VARCHAR(25) NOT NULL,
              username VARCHAR(16) NOT NULL,
              email VARCHAR(35),
              joined DATE NOT NULL
          )
          PARTITION BY RANGE( YEAR(joined) ) (
              PARTITION p0 VALUES LESS THAN (1960),
              PARTITION p1 VALUES LESS THAN (1970),
              PARTITION p2 VALUES LESS THAN (1980),
              PARTITION p3 VALUES LESS THAN (1990),
              PARTITION p4 VALUES LESS THAN MAXVALUE
          );

     Beginning with MySQL 5.5.1, it is also possible to partition a
     table by `RANGE' based on the value of a *Note `TIMESTAMP':
     datetime. column, using the `UNIX_TIMESTAMP()' function, as shown
     in this example:

          CREATE TABLE quarterly_report_status (
              report_id INT NOT NULL,
              report_status VARCHAR(20) NOT NULL,
              report_updated TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP
          )
          PARTITION BY RANGE ( UNIX_TIMESTAMP(report_updated) ) (
              PARTITION p0 VALUES LESS THAN ( UNIX_TIMESTAMP('2008-01-01 00:00:00') ),
              PARTITION p1 VALUES LESS THAN ( UNIX_TIMESTAMP('2008-04-01 00:00:00') ),
              PARTITION p2 VALUES LESS THAN ( UNIX_TIMESTAMP('2008-07-01 00:00:00') ),
              PARTITION p3 VALUES LESS THAN ( UNIX_TIMESTAMP('2008-10-01 00:00:00') ),
              PARTITION p4 VALUES LESS THAN ( UNIX_TIMESTAMP('2009-01-01 00:00:00') ),
              PARTITION p5 VALUES LESS THAN ( UNIX_TIMESTAMP('2009-04-01 00:00:00') ),
              PARTITION p6 VALUES LESS THAN ( UNIX_TIMESTAMP('2009-07-01 00:00:00') ),
              PARTITION p7 VALUES LESS THAN ( UNIX_TIMESTAMP('2009-10-01 00:00:00') ),
              PARTITION p8 VALUES LESS THAN ( UNIX_TIMESTAMP('2010-01-01 00:00:00') ),
              PARTITION p9 VALUES LESS THAN (MAXVALUE)
          );

     Also beginning with MySQL 5.5.1, any other expressions involving
     *Note `TIMESTAMP': datetime. values are not permitted. (See Bug
     #42849.)

     *Note*:

     It is also possible in MySQL 5.5.1 and later to use
     `UNIX_TIMESTAMP(timestamp_column)' as a partitioning expression
     for tables that are partitioned by `LIST'. However, it is usually
     not practical to do so.

  2. Partition the table by `RANGE COLUMNS', using a *Note `DATE':
     datetime. or *Note `DATETIME': datetime. column as the
     partitioning column. For example, the `members' table could be
     defined using the `joined' column directly, as shown here:

          CREATE TABLE members (
              firstname VARCHAR(25) NOT NULL,
              lastname VARCHAR(25) NOT NULL,
              username VARCHAR(16) NOT NULL,
              email VARCHAR(35),
              joined DATE NOT NULL
          )
          PARTITION BY RANGE COLUMNS(joined) (
              PARTITION p0 VALUES LESS THAN ('1960-01-01'),
              PARTITION p1 VALUES LESS THAN ('1970-01-01'),
              PARTITION p2 VALUES LESS THAN ('1980-01-01'),
              PARTITION p3 VALUES LESS THAN ('1990-01-01'),
              PARTITION p4 VALUES LESS THAN MAXVALUE
          );

*Note*:

The use of partitioning columns employing date or time types other than
*Note `DATE': datetime. or *Note `DATETIME': datetime. is not supported
with `RANGE COLUMNS'.


File: manual.info,  Node: partitioning-list,  Next: partitioning-columns,  Prev: partitioning-range,  Up: partitioning-types

18.2.2 `LIST' Partitioning
--------------------------

List partitioning in MySQL is similar to range partitioning in many
ways. As in partitioning by `RANGE', each partition must be explicitly
defined. The chief difference between the two types of partitioning is
that, in list partitioning, each partition is defined and selected
based on the membership of a column value in one of a set of value
lists, rather than in one of a set of contiguous ranges of values. This
is done by using `PARTITION BY LIST(EXPR)' where EXPR is a column value
or an expression based on a column value and returning an integer
value, and then defining each partition by means of a `VALUES IN
(VALUE_LIST)', where VALUE_LIST is a comma-separated list of integers.

*Note*:

In MySQL 5.5, it is possible to match against only a list of integers
(and possibly `NULL'--see *Note partitioning-handling-nulls::) when
partitioning by `LIST'.

However, beginning with MySQL 5.5.0, other column types may be used in
value lists when employing `LIST COLUMN' partitioning, which is
described later in this section.

Unlike the case with partitions defined by range, list partitions do
not need to be declared in any particular order.  For more detailed
syntactical information, see *Note create-table::.

For the examples that follow, we assume that the basic definition of
the table to be partitioned is provided by the *Note `CREATE TABLE':
create-table. statement shown here:

     CREATE TABLE employees (
         id INT NOT NULL,
         fname VARCHAR(30),
         lname VARCHAR(30),
         hired DATE NOT NULL DEFAULT '1970-01-01',
         separated DATE NOT NULL DEFAULT '9999-12-31',
         job_code INT,
         store_id INT
     );

(This is the same table used as a basis for the examples in *Note
partitioning-range::.)

Suppose that there are 20 video stores distributed among 4 franchises
as shown in the following table.

This table illustrates an example of 20 video stores distributed among
4 regional franchises, as described in the preceding text.

Region                 Store ID Numbers
North                  3, 5, 6, 9, 17
East                   1, 2, 10, 11, 19, 20
West                   4, 12, 13, 14, 18
Central                7, 8, 15, 16

To partition this table in such a way that rows for stores belonging to
the same region are stored in the same partition, you could use the
*Note `CREATE TABLE': create-table.  statement shown here:

     CREATE TABLE employees (
         id INT NOT NULL,
         fname VARCHAR(30),
         lname VARCHAR(30),
         hired DATE NOT NULL DEFAULT '1970-01-01',
         separated DATE NOT NULL DEFAULT '9999-12-31',
         job_code INT,
         store_id INT
     )
     PARTITION BY LIST(store_id) (
         PARTITION pNorth VALUES IN (3,5,6,9,17),
         PARTITION pEast VALUES IN (1,2,10,11,19,20),
         PARTITION pWest VALUES IN (4,12,13,14,18),
         PARTITION pCentral VALUES IN (7,8,15,16)
     );

This makes it easy to add or drop employee records relating to specific
regions to or from the table. For instance, suppose that all stores in
the West region are sold to another company.  Beginning with MySQL
5.5.0, all rows relating to employees working at stores in that region
can be deleted with the query `ALTER TABLE employees TRUNCATE PARTITION
pWest', which can be executed much more efficiently than the equivalent
*Note `DELETE': delete.  statement `DELETE FROM employees WHERE
store_id IN (4,12,13,14,18);'. (Using `ALTER TABLE employees DROP
PARTITION pWest' would also delete all of these rows, but would also
remove the partition `pWest' from the definition of the table; you
would need to use an `ALTER TABLE ... ADD PARTITION' statement to
restore the table's original partitioning scheme.)

As with `RANGE' partitioning, it is possible to combine `LIST'
partitioning with partitioning by hash or key to produce a composite
partitioning (subpartitioning). See *Note partitioning-subpartitions::.

Unlike the case with `RANGE' partitioning, there is no `catch-all' such
as `MAXVALUE'; all expected values for the partitioning expression
should be covered in `PARTITION ... VALUES IN (...)' clauses. An *Note
`INSERT': insert. statement containing an unmatched partitioning column
value fails with an error, as shown in this example:

     mysql> CREATE TABLE h2 (
         ->   c1 INT,
         ->   c2 INT
         -> )
         -> PARTITION BY LIST(c1) (
         ->   PARTITION p0 VALUES IN (1, 4, 7),
         ->   PARTITION p1 VALUES IN (2, 5, 8)
         -> );
     Query OK, 0 rows affected (0.11 sec)

     mysql> INSERT INTO h2 VALUES (3, 5);
     `ERROR 1525 (HY000): Table has no partition for value 3'

When inserting multiple rows using a single *Note `INSERT': insert.
statement, any rows coming before the row containing the unmatched
value are inserted, but any coming after it are not:

     mysql> SELECT * FROM h2;
     Empty set (0.00 sec)

     mysql> INSERT INTO h2 VALUES (4, 7), (3, 5), (6, 0);
     `ERROR 1525 (HY000): Table has no partition for value 3'
     mysql> SELECT * FROM h2;
     +------+------+
     | c1   | c2   |
     +------+------+
     |    4 |    7 |
     +------+------+
     1 row in set (0.00 sec)

You can cause this type of error to be ignored by using the `IGNORE'
keyword. If you do so, rows containing unmatched partitioning column
values are not inserted, but any rows with matching values _are_
inserted, and no errors are reported:

     mysql> TRUNCATE h2;
     Query OK, 1 row affected (0.00 sec)

     mysql> SELECT * FROM h2;
     Empty set (0.00 sec)

     mysql> INSERT IGNORE INTO h2 VALUES (2, 5), (6, 10), (7, 5), (3, 1), (1, 9);
     Query OK, 3 rows affected (0.00 sec)
     Records: 5  Duplicates: 2  Warnings: 0

     mysql> SELECT * FROM h2;
     +------+------+
     | c1   | c2   |
     +------+------+
     |    7 |    5 |
     |    1 |    9 |
     |    2 |    5 |
     +------+------+
     3 rows in set (0.00 sec)

MySQL 5.5 provides support for `LIST COLUMNS' partitioning. This is a
variant of `LIST' partitioning that enables you to use columns of types
other than integer types for partitioning columns, as well as to use
multiple columns as partitioning keys. For more information, see *Note
partitioning-columns-list::.


File: manual.info,  Node: partitioning-columns,  Next: partitioning-hash,  Prev: partitioning-list,  Up: partitioning-types

18.2.3 `COLUMNS' Partitioning
-----------------------------

* Menu:

* partitioning-columns-range::   `RANGE COLUMNS' partitioning
* partitioning-columns-list::    `LIST COLUMNS' partitioning

The next two sections discuss _`COLUMNS' partitioning_, which are
variants on `RANGE' and `LIST' partitioning that were introduced in
MySQL 5.5.0. `COLUMNS' partitioning enables the use of multiple columns
in partitioning keys. All of these columns are taken into account both
for the purpose of placing rows in partitions and for the determination
of which partitions are to be checked for matching rows in partition
pruning.

In addition, both `RANGE COLUMNS' partitioning and `LIST COLUMNS'
partitioning support the use of non-integer columns for defining value
ranges or list members. The permitted data types are shown in the
following list:

   * All integer types: *Note `TINYINT': integer-types, *Note
     `SMALLINT': integer-types, *Note `MEDIUMINT': integer-types, *Note
     `INT': integer-types.  (*Note `INTEGER': integer-types.), and
     *Note `BIGINT': integer-types. (This is the same as with
     partitioning by `RANGE' and `LIST'.)

     Other numeric data types (such as *Note `DECIMAL':
     fixed-point-types. or *Note `FLOAT': floating-point-types.) are
     not supported as partitioning columns.

   * *Note `DATE': datetime. and *Note `DATETIME': datetime.

     Columns using other data types relating to dates or times are not
     supported as partitioning columns.

   * The following string types: *Note `CHAR': char, *Note `VARCHAR':
     char, *Note `BINARY': binary-varbinary, and *Note `VARBINARY':
     binary-varbinary.

     *Note `TEXT': blob. and *Note `BLOB': blob. columns are not
     supported as partitioning columns.

The discussions of `RANGE COLUMNS' and `LIST COLUMNS' partitioning in
the next two sections assume that you are already familiar with
partitioning based on ranges and lists as supported in MySQL 5.1 and
later; for more information about these, see *Note
partitioning-range::, and *Note partitioning-list::, respectively.


File: manual.info,  Node: partitioning-columns-range,  Next: partitioning-columns-list,  Prev: partitioning-columns,  Up: partitioning-columns

18.2.3.1 `RANGE COLUMNS' partitioning
.....................................

Range columns partitioning is similar to range partitioning, but
enables you to define partitions using ranges based on multiple column
values. In addition, you can define the ranges using columns of types
other than integer types.

`RANGE COLUMNS' partitioning differs significantly from `RANGE'
partitioning in the following ways:

   * `RANGE COLUMNS' does not accept expressions, only names of columns.

   * `RANGE COLUMNS' accepts a list of one or more columns.

     `RANGE COLUMNS' partitions are based on comparisons between
     _tuples_ (lists of column values) rather than comparisons between
     scalar values. Placement of rows in `RANGE COLUMNS' partitions is
     also based on comparisons between tuples; this is discussed
     further later in this section.

   * `RANGE COLUMNS' partitioning columns are not restricted to integer
     columns; string, *Note `DATE': datetime. and *Note `DATETIME':
     datetime. columns can also be used as partitioning columns. (See
     *Note partitioning-columns::, for details.)

The basic syntax for creating a table partitioned by `RANGE COLUMNS' is
shown here:

     CREATE TABLE TABLE_NAME
     PARTITIONED BY RANGE COLUMNS(COLUMN_LIST) (
         PARTITION PARTITION_NAME VALUES LESS THAN (VALUE_LIST)[,
         PARTITION PARTITION_NAME VALUES LESS THAN (VALUE_LIST)][,
         ...]
     )

     COLUMN_LIST:
         COLUMN_NAME[, COLUMN_NAME][, ...]

     VALUE_LIST:
         VALUE[, VALUE][, ...]

*Note*:

Not all *Note `CREATE TABLE': create-table. options that can be used
when creating partitioned tables are shown here. For complete
information, see *Note create-table::.

In the syntax just shown, COLUMN_LIST is a list of one or more columns
(sometimes called a _partitioning column list_), and VALUE_LIST is a
list of values (that is, it is a _partition definition value list_). A
VALUE_LIST must be supplied for each partition definition, and each
VALUE_LIST must have the same number of values as the COLUMN_LIST has
columns. Generally speaking, if you use N columns in the `COLUMNS'
clause, then each `VALUES LESS THAN' clause must also be supplied with
a list of N values.

The elements in the partitioning column list and in the value list
defining each partition must occur in the same order. In addition, each
element in the value list must be of the same data type as the
corresponding element in the column list.  However, the order of the
column names in the partitioning column list and the value lists does
not have to be the same as the order of the table column definitions in
the main part of the *Note `CREATE TABLE': create-table. statement.  As
with table partitioned by `RANGE', you can use `MAXVALUE' to represent
a value such that any legal value inserted into a given column is
always less than this value. Here is an example of a *Note `CREATE
TABLE': create-table. statement that helps to illustrate all of these
points:

     mysql> CREATE TABLE rcx (
         ->     a INT,
         ->     b INT,
         ->     c CHAR(3),
         ->     d INT
         -> )
         -> PARTITION BY RANGE COLUMNS(a,d,c) (
         ->     PARTITION p0 VALUES LESS THAN (5,10,'ggg'),
         ->     PARTITION p1 VALUES LESS THAN (10,20,'mmmm'),
         ->     PARTITION p2 VALUES LESS THAN (15,30,'sss'),
         ->     PARTITION p3 VALUES LESS THAN (MAXVALUE,MAXVALUE,MAXVALUE)
         -> );
     Query OK, 0 rows affected (0.15 sec)

Table `rcx' contains the columns `a', `b', `c', `d'. The partitioning
column list supplied to the `COLUMNS' clause uses 3 of these columns,
in the order `a', `d', `c'. Each value list used to define a partition
contains 3 values in the same order; that is, each value list tuple has
the form (`INT', `INT', `CHAR(3)'), which corresponds to the data types
used by columns `a', `d', and `c' (in that order).

Placement of rows into partitions is determined by comparing the tuple
from a row to be inserted that matches the column list in the `COLUMNS'
clause with the tuples used in the `VALUES LESS THAN' clauses to define
partitions of the table. Because we are comparing tuples (that is,
lists or sets of values) rather than scalar values, the semantics of
`VALUES LESS THAN' as used with `RANGE COLUMNS' partitions differs
somewhat from the case with simple `RANGE' partitions. In `RANGE'
partitioning, a row generating an expression value that is equal to a
limiting value in a `VALUES LESS THAN' is never placed in the
corresponding partition; however, when using `RANGE COLUMNS'
partitioning, it is sometimes possible for a row whose partitioning
column list's first element is equal in value to the that of the first
element in a `VALUES LESS THAN' value list to be placed in the
corresponding partition.

Consider the `RANGE' partitioned table created by this statement:

     CREATE TABLE r1 (
         a INT,
         b INT
     )
     PARTITION BY RANGE (a)  (
         PARTITION p0 VALUES LESS THAN (5),
         PARTITION p1 VALUES LESS THAN (MAXVALUE)
     );

If we insert 3 rows into this table such that the column value for `a'
is `5' for each row, all 3 rows are stored in partition `p1' because
the `a' column value is in each case not less than 5, as we can see by
executing the proper query against the *Note
`INFORMATION_SCHEMA.PARTITIONS': partitions-table.  table:

     mysql> INSERT INTO r1 VALUES (5,10), (5,11), (5,12);
     Query OK, 3 rows affected (0.00 sec)
     Records: 3  Duplicates: 0  Warnings: 0

     mysql> SELECT PARTITION_NAME,TABLE_ROWS
         ->     FROM INFORMATION_SCHEMA.PARTITIONS
         ->     WHERE TABLE_NAME = 'r1';
     +----------------+------------+
     | PARTITION_NAME | TABLE_ROWS |
     +----------------+------------+
     | p0             |          0 |
     | p1             |          3 |
     +----------------+------------+
     2 rows in set (0.00 sec)

Now consider a similar table `rc1' that uses `RANGE COLUMNS'
partitioning with both columns `a' and `b' referenced in the `COLUMNS'
clause, created as shown here:

     CREATE TABLE rc1 (
         a INT,
         b INT
     )
     PARTITION BY RANGE COLUMNS(a, b) (
         PARTITION p0 VALUES LESS THAN (5, 12),
         PARTITION p3 VALUES LESS THAN (MAXVALUE, MAXVALUE)
     );

If we insert exactly the same rows into `rc1' as we just inserted into
`r1', the distribution of the rows is quite different:

     mysql> INSERT INTO rc1 VALUES (5,10), (5,11), (5,12);
     Query OK, 3 rows affected (0.00 sec)
     Records: 3  Duplicates: 0  Warnings: 0

     mysql> SELECT PARTITION_NAME,TABLE_ROWS
         ->     FROM INFORMATION_SCHEMA.PARTITIONS
         ->     WHERE TABLE_NAME = 'rc1';
     +--------------+----------------+------------+
     | TABLE_SCHEMA | PARTITION_NAME | TABLE_ROWS |
     +--------------+----------------+------------+
     | p            | p0             |          2 |
     | p            | p1             |          1 |
     +--------------+----------------+------------+
     2 rows in set (0.00 sec)

This is because we are comparing rows rather than scalar values. We can
compare the row values inserted with the limiting row value from the
`VALUES THAN LESS THAN' clause used to define partition `p0' in table
`rc1', like this:

     mysql> SELECT (5,10) < (5,12), (5,11) < (5,12), (5,12) < (5,12);
     +-----------------+-----------------+-----------------+
     | (5,10) < (5,12) | (5,11) < (5,12) | (5,12) < (5,12) |
     +-----------------+-----------------+-----------------+
     |               1 |               1 |               0 |
     +-----------------+-----------------+-----------------+
     1 row in set (0.00 sec)

The 2 tuples `(5,10)' and `(5,11)' evaluate as less than `(5,12)', so
they are stored in partition `p0'. Since 5 is not less than 5 and 12 is
not less than 12, `(5,12)' is considered not less than `(5,12)', and is
stored in partition `p1'.

The *Note `SELECT': select. statement in the preceding example could
also have been written using explicit row constructors, like this:

     SELECT ROW(5,10) < ROW(5,12), ROW(5,11) < ROW(5,12), ROW(5,12) < ROW(5,12);

For more information about the use of row constructors in MySQL, see
*Note row-subqueries::.

For a table partitioned by `RANGE COLUMNS' using only a single
partitioning column, the storing of rows in partitions is the same as
that of an equivalent table that is partitioned by `RANGE'. The
following `CREATE TABLE' statement creates a table partitioned by
`RANGE COLUMNS' using 1 partitioning column:

     CREATE TABLE rx (
         a INT,
         b INT
     )
     PARTITION BY RANGE COLUMNS (a)  (
         PARTITION p0 VALUES LESS THAN (5),
         PARTITION p1 VALUES LESS THAN (MAXVALUE)
     );

If we insert the rows `(5,10)', `(5,11)', and `(5,12)' into this table,
we can see that their placement is the same as it is for the table `r'
we created and populated earlier:

     mysql> INSERT INTO rx VALUES (5,10), (5,11), (5,12);
     Query OK, 3 rows affected (0.00 sec)
     Records: 3  Duplicates: 0  Warnings: 0

     mysql> SELECT PARTITION_NAME,TABLE_ROWS
         ->     FROM INFORMATION_SCHEMA.PARTITIONS
         ->     WHERE TABLE_NAME = 'rx';
     +--------------+----------------+------------+
     | TABLE_SCHEMA | PARTITION_NAME | TABLE_ROWS |
     +--------------+----------------+------------+
     | p            | p0             |          0 |
     | p            | p1             |          3 |
     +--------------+----------------+------------+
     2 rows in set (0.00 sec)

It is also possible to create tables partitioned by `RANGE COLUMNS'
where limiting values for one or more columns are repeated in
successive partition definitions. You can do this as long as the tuples
of column values used to define the partitions are strictly increasing.
For example, each of the following *Note `CREATE TABLE': create-table.
statements is valid:

     CREATE TABLE rc2 (
         a INT,
         b INT
     )
     PARTITION BY RANGE COLUMNS(a,b) (
         PARTITION p0 VALUES LESS THAN (0,10),
         PARTITION p1 VALUES LESS THAN (10,20),
         PARTITION p2 VALUES LESS THAN (10,30),
         PARTITION p3 VALUES LESS THAN (MAXVALUE,MAXVALUE)
      );

     CREATE TABLE rc3 (
         a INT,
         b INT
     )
     PARTITION BY RANGE COLUMNS(a,b) (
         PARTITION p0 VALUES LESS THAN (0,10),
         PARTITION p1 VALUES LESS THAN (10,20),
         PARTITION p2 VALUES LESS THAN (10,30),
         PARTITION p3 VALUES LESS THAN (10,35),
         PARTITION p4 VALUES LESS THAN (20,40),
         PARTITION p5 VALUES LESS THAN (MAXVALUE,MAXVALUE)
      );

The following statement also succeeds, even though it might appear at
first glance that it would not, since the limiting value of column `b'
is 25 for partition `p0' and 20 for partition `p1', and the limiting
value of column `c' is 100 for partition `p1' and 50 for partition `p2':

     CREATE TABLE rc4 (
         a INT,
         b INT,
         c INT
     )
     PARTITION BY RANGE COLUMNS(a,b,c) (
         PARTITION p0 VALUES LESS THAN (0,25,50),
         PARTITION p1 VALUES LESS THAN (10,20,100),
         PARTITION p2 VALUES LESS THAN (10,30,50)
         PARTITION p3 VALUES LESS THAN (MAXVALUE,MAXVALUE,MAXVALUE)
      );

When designing tables partitioned by `RANGE COLUMNS', you can always
test successive partition definitions by comparing the desired tuples
using the *Note `mysql': mysql. client, like this:

     mysql> SELECT (0,25,50) < (10,20,100), (10,20,100) < (10,30,50);
     +-------------------------+--------------------------+
     | (0,25,50) < (10,20,100) | (10,20,100) < (10,30,50) |
     +-------------------------+--------------------------+
     |                       1 |                        1 |
     +-------------------------+--------------------------+
     1 row in set (0.00 sec)

If a *Note `CREATE TABLE': create-table. statement contains partition
definitions that are not in strictly increasing order, it fails with an
error, as shown in this example:

     mysql> CREATE TABLE rcf (
         ->     a INT,
         ->     b INT,
         ->     c INT
         -> )
         -> PARTITION BY RANGE COLUMNS(a,b,c) (
         ->     PARTITION p0 VALUES LESS THAN (0,25,50),
         ->     PARTITION p1 VALUES LESS THAN (20,20,100),
         ->     PARTITION p2 VALUES LESS THAN (10,30,50),
         ->     PARTITION p3 VALUES LESS THAN (MAXVALUE,MAXVALUE,MAXVALUE)
         ->  );
     `ERROR 1493 (HY000): VALUES LESS THAN value must be strictly increasing for each partition'

When you get such an error, you can deduce which partition definitions
are invalid by making `less than' comparisons between their column
lists. In this case, the problem is with the definition of partition
`p2' because the tuple used to define it is not less than the tuple
used to define partition `p3', as shown here:

     mysql> SELECT (0,25,50) < (20,20,100), (20,20,100) < (10,30,50);
     +-------------------------+--------------------------+
     | (0,25,50) < (20,20,100) | (20,20,100) < (10,30,50) |
     +-------------------------+--------------------------+
     |                       1 |                        0 |
     +-------------------------+--------------------------+
     1 row in set (0.00 sec)

It is also possible for `MAXVALUE' to appear for the same column in
more than one `VALUES LESS THAN' clause when using `RANGE COLUMNS'.
However, the limiting values for individual columns in successive
partition definitions should otherwise be increasing, there should be
no more than one partition defined where `MAXVALUE' is used as the upper
limit for all column values, and this partition definition should
appear last in the list of `PARTITION ...  VALUES LESS THAN' clauses.
In addition, you cannot use `MAXVALUE' as the limiting value for the
first column in more than one partition definition.

As stated previously, it is also possible with `RANGE COLUMNS'
partitioning to use non-integer columns as partitioning columns. (See
*Note partitioning-columns::, for a complete listing of these.)
Consider a table named `employees' (which is not partitioned), created
using the following statement:

     CREATE TABLE employees (
         id INT NOT NULL,
         fname VARCHAR(30),
         lname VARCHAR(30),
         hired DATE NOT NULL DEFAULT '1970-01-01',
         separated DATE NOT NULL DEFAULT '9999-12-31',
         job_code INT NOT NULL,
         store_id INT NOT NULL
     );

Using `RANGE COLUMNS' partitioning, you can create a version of this
table that stores each row in one of four partitions based on the
employee's last name, like this:

     CREATE TABLE employees_by_lname (
         id INT NOT NULL,
         fname VARCHAR(30),
         lname VARCHAR(30),
         hired DATE NOT NULL DEFAULT '1970-01-01',
         separated DATE NOT NULL DEFAULT '9999-12-31',
         job_code INT NOT NULL,
         store_id INT NOT NULL
     )
     PARTITION BY RANGE COLUMNS (lname)  (
         PARTITION p0 VALUES LESS THAN ('g'),
         PARTITION p1 VALUES LESS THAN ('m'),
         PARTITION p2 VALUES LESS THAN ('t'),
         PARTITION p3 VALUES LESS THAN (MAXVALUE)
     );

Alternatively, you could cause the `employees' table as created
previously to be partitioned using this scheme by executing the
following *Note `ALTER TABLE': alter-table-partition-operations.
statement:

     ALTER TABLE employees PARTITION BY RANGE COLUMNS (lname)  (
         PARTITION p0 VALUES LESS THAN ('g'),
         PARTITION p1 VALUES LESS THAN ('m'),
         PARTITION p2 VALUES LESS THAN ('t'),
         PARTITION p3 VALUES LESS THAN (MAXVALUE)
     );

*Note*:

Because different character sets and collations have different sort
orders, the character sets and collations in use may effect which
partition of a table partitioned by `RANGE COLUMNS' a given row is
stored in when using string columns as partitioning columns. In
addition, changing the character set or collation for a given database,
table, or column after such a table is created may cause changes in how
rows are distributed. For example, when using a case-sensitive
collation, `'and'' sorts before `'Andersen'', but when using a collation
that is case insensitive, the reverse is true.

For information about how MySQL handles character sets and collations,
see *Note charset::.

Similarly, you can cause the `employees' table to be partitioned in
such a way that each row is stored in one of several partitions based
on the decade in which the corresponding employee was hired using the
*Note `ALTER TABLE': alter-table-partition-operations. statement shown
here:

     ALTER TABLE employees PARTITION BY RANGE COLUMNS (hired)  (
         PARTITION p0 VALUES LESS THAN ('1970-01-01'),
         PARTITION p1 VALUES LESS THAN ('1980-01-01'),
         PARTITION p2 VALUES LESS THAN ('1990-01-01'),
         PARTITION p3 VALUES LESS THAN ('2000-01-01'),
         PARTITION p4 VALUES LESS THAN ('2010-01-01'),
         PARTITION p5 VALUES LESS THAN (MAXVALUE)
     );

See *Note create-table::, for additional information about `PARTITION
BY RANGE COLUMNS' syntax.


File: manual.info,  Node: partitioning-columns-list,  Prev: partitioning-columns-range,  Up: partitioning-columns

18.2.3.2 `LIST COLUMNS' partitioning
....................................

MySQL 5.5 provides support for `LIST COLUMNS' partitioning. This is a
variant of `LIST' partitioning that enables the use of multiple columns
as partition keys, and for columns of data types other than integer
types to be used as partitioning columns; you can use string types,
*Note `DATE': datetime, and *Note `DATETIME': datetime. columns. (For
more information about permitted data types for `COLUMNS' partitioning
columns, see *Note partitioning-columns::.)

Suppose that you have a business that has customers in 12 cities which,
for sales and marketing purposes, you organize into 4 regions of 3
cities each as shown in the following table:

This table illustrates the example described in the preceding text of a
business with four sales and marketing regions, with each region having
three cities.

Region                               Cities
1                                    Oskarshamn, Ho"gsby, Mo"nsteraas
2                                    Vimmerby, Hultsfred, Va"stervik
3                                    Na"ssjo", Eksjo", Vetlanda
4                                    Uppvidinge, Alvesta, Va"xjo

With `LIST COLUMNS' partitioning, you can create a table for customer
data that assigns a row to any of 4 partitions corresponding to these
regions based on the name of the city where a customer resides, as
shown here:

     CREATE TABLE customers_1 (
         first_name VARCHAR(25),
         last_name VARCHAR(25),
         street_1 VARCHAR(30),
         street_2 VARCHAR(30),
         city VARCHAR(15),
         renewal DATE
     )
     PARTITION BY LIST COLUMNS(city) (
         PARTITION pRegion_1 VALUES IN('Oskarshamn', 'Ho"gsby', 'Mo"nsteraas'),
         PARTITION pRegion_2 VALUES IN('Vimmerby', 'Hultsfred', 'Va"stervik'),
         PARTITION pRegion_3 VALUES IN('Na"ssjo"', 'Eksjo"', 'Vetlanda'),
         PARTITION pRegion_4 VALUES IN('Uppvidinge', 'Alvesta', 'Va"xjo')
     );

As with partitioning by `RANGE COLUMNS', you do not need to use
expressions in the `COLUMNS()' clause to convert column values into
integers. (In fact, the use of expressions other than column names is
not permitted with `COLUMNS()'.)

It is also possible to use *Note `DATE': datetime.  and *Note
`DATETIME': datetime. columns, as shown in the following example that
uses the same name and columns as the `customers_1' table shown
previously, but employs `LIST COLUMNS' partitioning based on the
`renewal' column to store rows in one of 4 partitions depending on the
week in February 2010 the customer's account is scheduled to renew:

     CREATE TABLE customers_2 (
         first_name VARCHAR(25),
         last_name VARCHAR(25),
         street_1 VARCHAR(30),
         street_2 VARCHAR(30),
         city VARCHAR(15),
         renewal DATE
     )
     PARTITION BY LIST COLUMNS(renewal) (
         PARTITION pWeek_1 VALUES IN('2010-02-01', '2010-02-02', '2010-02-03',
             '2010-02-04', '2010-02-05', '2010-02-06', '2010-02-07'),
         PARTITION pWeek_2 VALUES IN('2010-02-08', '2010-02-09', '2010-02-10',
             '2010-02-11', '2010-02-12', '2010-02-13', '2010-02-14'),
         PARTITION pWeek_3 VALUES IN('2010-02-15', '2010-02-16', '2010-02-17',
             '2010-02-18', '2010-02-19', '2010-02-20', '2010-02-21'),
         PARTITION pWeek_4 VALUES IN('2010-02-22', '2010-02-23', '2010-02-24',
             '2010-02-25', '2010-02-26', '2010-02-27', '2010-02-28')
     );

This works, but becomes cumbersome to define and maintain if the number
of dates involved grows very large; in such cases, it is usually more
practical to employ `RANGE' or `RANGE COLUMNS' partitioning instead. In
this case, since the column we wish to use as the partitioning key is a
*Note `DATE': datetime. column, we use `RANGE COLUMNS' partitioning, as
shown here:

     CREATE TABLE customers_3 (
         first_name VARCHAR(25),
         last_name VARCHAR(25),
         street_1 VARCHAR(30),
         street_2 VARCHAR(30),
         city VARCHAR(15),
         renewal DATE
     )
     PARTITION BY RANGE COLUMNS(renewal) (
         PARTITION pWeek_1 VALUES LESS THAN('2010-02-09'),
         PARTITION pWeek_2 VALUES LESS THAN('2010-02-15'),
         PARTITION pWeek_3 VALUES LESS THAN('2010-02-22'),
         PARTITION pWeek_4 VALUES LESS THAN('2010-03-01')
     );

See *Note partitioning-columns-range::, for more information.

In addition (as with `RANGE COLUMNS' partitioning), you can use
multiple columns in the `COLUMNS()' clause.

See *Note create-table::, for additional information about `PARTITION
BY LIST COLUMNS()' syntax.


File: manual.info,  Node: partitioning-hash,  Next: partitioning-key,  Prev: partitioning-columns,  Up: partitioning-types

18.2.4 `HASH' Partitioning
--------------------------

* Menu:

* partitioning-linear-hash::     `LINEAR HASH' Partitioning

Partitioning by `HASH' is used primarily to ensure an even distribution
of data among a predetermined number of partitions. With range or list
partitioning, you must specify explicitly into which partition a given
column value or set of column values is to be stored; with hash
partitioning, MySQL takes care of this for you, and you need only
specify a column value or expression based on a column value to be
hashed and the number of partitions into which the partitioned table is
to be divided.

To partition a table using `HASH' partitioning, it is necessary to
append to the *Note `CREATE TABLE': create-table. statement a
`PARTITION BY HASH (EXPR)' clause, where EXPR is an expression that
returns an integer. This can simply be the name of a column whose type
is one of MySQL's integer types. In addition, you will most likely want
to follow this with a `PARTITIONS NUM' clause, where NUM is a positive
integer representing the number of partitions into which the table is to
be divided.

For example, the following statement creates a table that uses hashing
on the `store_id' column and is divided into 4 partitions:

     CREATE TABLE employees (
         id INT NOT NULL,
         fname VARCHAR(30),
         lname VARCHAR(30),
         hired DATE NOT NULL DEFAULT '1970-01-01',
         separated DATE NOT NULL DEFAULT '9999-12-31',
         job_code INT,
         store_id INT
     )
     PARTITION BY HASH(store_id)
     PARTITIONS 4;

If you do not include a `PARTITIONS' clause, the number of partitions
defaults to `1'.

Using the `PARTITIONS' keyword without a number following it results in
a syntax error.

You can also use an SQL expression that returns an integer for EXPR.
For instance, you might want to partition based on the year in which an
employee was hired. This can be done as shown here:

     CREATE TABLE employees (
         id INT NOT NULL,
         fname VARCHAR(30),
         lname VARCHAR(30),
         hired DATE NOT NULL DEFAULT '1970-01-01',
         separated DATE NOT NULL DEFAULT '9999-12-31',
         job_code INT,
         store_id INT
     )
     PARTITION BY HASH( YEAR(hired) )
     PARTITIONS 4;

EXPR must return a nonconstant, nonrandom integer value (in other
words, it should be varying but deterministic), and must not contain
any prohibited constructs as described in *Note
partitioning-limitations::. You should also keep in mind that this
expression is evaluated each time a row is inserted or updated (or
possibly deleted); this means that very complex expressions may give
rise to performance issues, particularly when performing operations
(such as batch inserts) that affect a great many rows at one time.

The most efficient hashing function is one which operates upon a single
table column and whose value increases or decreases consistently with
the column value, as this allows for `pruning' on ranges of partitions.
That is, the more closely that the expression varies with the value of
the column on which it is based, the more efficiently MySQL can use the
expression for hash partitioning.

For example, where `date_col' is a column of type *Note `DATE':
datetime, then the expression `TO_DAYS(date_col)' is said to vary
directly with the value of `date_col', because for every change in the
value of `date_col', the value of the expression changes in a
consistent manner. The variance of the expression `YEAR(date_col)' with
respect to `date_col' is not quite as direct as that of
`TO_DAYS(date_col)', because not every possible change in `date_col'
produces an equivalent change in `YEAR(date_col)'. Even so,
`YEAR(date_col)' is a good candidate for a hashing function, because it
varies directly with a portion of `date_col' and there is no possible
change in `date_col' that produces a disproportionate change in
`YEAR(date_col)'.

By way of contrast, suppose that you have a column named `int_col'
whose type is *Note `INT': integer-types. Now consider the expression
`POW(5-int_col,3) + 6'. This would be a poor choice for a hashing
function because a change in the value of `int_col' is not guaranteed
to produce a proportional change in the value of the expression.
Changing the value of `int_col' by a given amount can produce by widely
different changes in the value of the expression. For example, changing
`int_col' from `5' to `6' produces a change of `-1' in the value of the
expression, but changing the value of `int_col' from `6' to `7'
produces a change of `-7' in the expression value.

In other words, the more closely the graph of the column value _versus_
the value of the expression follows a straight line as traced by the
equation `y=Cx' where C is some nonzero constant, the better the
expression is suited to hashing. This has to do with the fact that the
more nonlinear an expression is, the more uneven the distribution of
data among the partitions it tends to produce.

In theory, pruning is also possible for expressions involving more than
one column value, but determining which of such expressions are
suitable can be quite difficult and time-consuming. For this reason,
the use of hashing expressions involving multiple columns is not
particularly recommended.

When `PARTITION BY HASH' is used, MySQL determines which partition of
NUM partitions to use based on the modulus of the result of the user
function. In other words, for an expression EXPR, the partition in
which the record is stored is partition number N, where `N = MOD(EXPR,
NUM)'. Suppose that table `t1' is defined as follows, so that it has 4
partitions:

     CREATE TABLE t1 (col1 INT, col2 CHAR(5), col3 DATE)
         PARTITION BY HASH( YEAR(col3) )
         PARTITIONS 4;

If you insert a record into `t1' whose `col3' value is `'2005-09-15'',
then the partition in which it is stored is determined as follows:

     MOD(YEAR('2005-09-01'),4)
     =  MOD(2005,4)
     =  1

MySQL 5.5 also supports a variant of `HASH' partitioning known as
_linear hashing_ which employs a more complex algorithm for determining
the placement of new rows inserted into the partitioned table. See
*Note partitioning-linear-hash::, for a description of this algorithm.

The user function is evaluated each time a record is inserted or
updated. It may also--depending on the circumstances--be evaluated when
records are deleted.

*Note*:

If a table to be partitioned has a `UNIQUE' key, then any columns
supplied as arguments to the `HASH' user function or to the `KEY''s
COLUMN_LIST must be part of that key.


File: manual.info,  Node: partitioning-linear-hash,  Prev: partitioning-hash,  Up: partitioning-hash

18.2.4.1 `LINEAR HASH' Partitioning
...................................

MySQL also supports linear hashing, which differs from regular hashing
in that linear hashing utilizes a linear powers-of-two algorithm
whereas regular hashing employs the modulus of the hashing function's
value.

Syntactically, the only difference between linear-hash partitioning and
regular hashing is the addition of the `LINEAR' keyword in the
`PARTITION BY' clause, as shown here:

     CREATE TABLE employees (
         id INT NOT NULL,
         fname VARCHAR(30),
         lname VARCHAR(30),
         hired DATE NOT NULL DEFAULT '1970-01-01',
         separated DATE NOT NULL DEFAULT '9999-12-31',
         job_code INT,
         store_id INT
     )
     PARTITION BY LINEAR HASH( YEAR(hired) )
     PARTITIONS 4;

Given an expression EXPR, the partition in which the record is stored
when linear hashing is used is partition number N from among NUM
partitions, where N is derived according to the following algorithm:

  1. Find the next power of 2 greater than NUM. We call this value V;
     it can be calculated as:

          V = POWER(2, CEILING(LOG(2, NUM)))

     (Suppose that NUM is 13. Then `LOG(2,13)' is 3.7004397181411.
     `CEILING(3.7004397181411)' is 4, and V = `POWER(2,4)', which is
     16.)

  2. Set N = F(COLUMN_LIST) & (V - 1).

  3. While N >= NUM:

        * Set V = CEIL(V / 2)

        * Set N = N & (V - 1)

Suppose that the table `t1', using linear hash partitioning and having
6 partitions, is created using this statement:

     CREATE TABLE t1 (col1 INT, col2 CHAR(5), col3 DATE)
         PARTITION BY LINEAR HASH( YEAR(col3) )
         PARTITIONS 6;

Now assume that you want to insert two records into `t1' having the
`col3' column values `'2003-04-14'' and `'1998-10-19''. The partition
number for the first of these is determined as follows:

     V = POWER(2, CEILING( LOG(2,6) )) = 8
     N = YEAR('2003-04-14') & (8 - 1)
        = 2003 & 7
        = 3

     (_3 >= 6 is FALSE: record stored in partition #3_)

The number of the partition where the second record is stored is
calculated as shown here:

     V = 8
     N = YEAR('1998-10-19') & (8-1)
       = 1998 & 7
       = 6

     (_6 >= 6 is TRUE: additional step required_)

     N = 6 & CEILING(8 / 2)
       = 6 & 3
       = 2

     (_2 >= 6 is FALSE: record stored in partition #2_)

The advantage in partitioning by linear hash is that the adding,
dropping, merging, and splitting of partitions is made much faster,
which can be beneficial when dealing with tables containing extremely
large amounts (terabytes) of data. The disadvantage is that data is
less likely to be evenly distributed between partitions as compared
with the distribution obtained using regular hash partitioning.


File: manual.info,  Node: partitioning-key,  Next: partitioning-subpartitions,  Prev: partitioning-hash,  Up: partitioning-types

18.2.5 `KEY' Partitioning
-------------------------

Partitioning by key is similar to partitioning by hash, except that
where hash partitioning employs a user-defined expression, the hashing
function for key partitioning is supplied by the MySQL server. MySQL
Cluster uses `MD5()' for this purpose; for tables using other storage
engines, the server employs its own internal hashing function which is
based on the same algorithm as `PASSWORD()'.

The syntax rules for `CREATE TABLE ... PARTITION BY KEY' are similar to
those for creating a table that is partitioned by hash. The major
differences are listed here:

   * `KEY' is used rather than `HASH'.

   * `KEY' takes only a list of zero or more column names. Any columns
     used as the partitioning key must comprise part or all of the
     table's primary key, if the table has one. Where no column name is
     specified as the partitioning key, the table's primary key is
     used, if there is one. For example, the following *Note `CREATE
     TABLE': create-table. statement is valid in MySQL 5.5:

          CREATE TABLE k1 (
              id INT NOT NULL PRIMARY KEY,
              name VARCHAR(20)
          )
          PARTITION BY KEY()
          PARTITIONS 2;

     If there is no primary key but there is a unique key, then the
     unique key is used for the partitioning key:

          CREATE TABLE k1 (
              id INT NOT NULL,
              name VARCHAR(20),
              UNIQUE KEY (id)
          )
          PARTITION BY KEY()
          PARTITIONS 2;

     However, if the unique key column were not defined as `NOT NULL',
     then the previous statement would fail.

     In both of these cases, the partitioning key is the `id' column,
     even though it is not shown in the output of *Note `SHOW CREATE
     TABLE': show-create-table. or in the `PARTITION_EXPRESSION' column
     of the *Note `INFORMATION_SCHEMA.PARTITIONS': partitions-table.
     table.

     Unlike the case with other partitioning types, columns used for
     partitioning by `KEY' are not restricted to integer or `NULL'
     values. For example, the following *Note `CREATE TABLE':
     create-table. statement is valid:

          CREATE TABLE tm1 (
              s1 CHAR(32) PRIMARY KEY
          )
          PARTITION BY KEY(s1)
          PARTITIONS 10;

     The preceding statement would _not_ be valid, were a different
     partitioning type to be specified.  (In this case, simply using
     `PARTITION BY KEY()' would also be valid and have the same effect
     as `PARTITION BY KEY(s1)', since `s1' is the table's primary key.)

     For additional information about this issue, see *Note
     partitioning-limitations::.

     *Note*:

     Tables using the *Note `NDBCLUSTER': mysql-cluster.  storage
     engine are implicitly partitioned by `KEY', again using the table's
     primary key as the partitioning key. In the event that the MySQL
     Cluster table has no explicit primary key, the `hidden' primary
     key generated by the *Note `NDBCLUSTER': mysql-cluster. storage
     engine for each MySQL Cluster table is used as the partitioning
     key.

     If you define an explicit partitioning scheme for an *Note
     `NDBCLUSTER': mysql-cluster. table, the table must have an
     explicit primary key, and any columns used in the partitioning
     expression must be part of this key.  However, if the table uses
     an `empty' partitioning expression--that is, `PARTITION BY KEY()'
     with no column references--then no explicit primary key is
     required.

     You can observe this partitioning using the *Note `ndb_desc':
     mysql-cluster-programs-ndb-desc. utility (with the `-p' option).

     *Important*:

     For a key-partitioned table, you cannot execute an `ALTER TABLE
     DROP PRIMARY KEY', as doing so generates the error `ERROR 1466
     (HY000): Field in list of fields for partition function not found
     in table'. This is not an issue for MySQL Cluster tables which are
     partitioned by `KEY'; in such cases, the table is reorganized
     using the `hidden' primary key as the table's new partitioning
     key. See *Note mysql-cluster::.

It is also possible to partition a table by linear key. Here is a
simple example:

     CREATE TABLE tk (
         col1 INT NOT NULL,
         col2 CHAR(5),
         col3 DATE
     )
     PARTITION BY LINEAR KEY (col1)
     PARTITIONS 3;

Using `LINEAR' has the same effect on `KEY' partitioning as it does on
`HASH' partitioning, with the partition number being derived using a
powers-of-two algorithm rather than modulo arithmetic. See *Note
partitioning-linear-hash::, for a description of this algorithm and its
implications.


File: manual.info,  Node: partitioning-subpartitions,  Next: partitioning-handling-nulls,  Prev: partitioning-key,  Up: partitioning-types

18.2.6 Subpartitioning
----------------------

Subpartitioning--also known as _composite partitioning_--is the further
division of each partition in a partitioned table. Consider the
following *Note `CREATE TABLE': create-table. statement:

     CREATE TABLE ts (id INT, purchased DATE)
         PARTITION BY RANGE( YEAR(purchased) )
         SUBPARTITION BY HASH( TO_DAYS(purchased) )
         SUBPARTITIONS 2 (
             PARTITION p0 VALUES LESS THAN (1990),
             PARTITION p1 VALUES LESS THAN (2000),
             PARTITION p2 VALUES LESS THAN MAXVALUE
         );

Table `ts' has 3 `RANGE' partitions. Each of these partitions--`p0',
`p1', and `p2'--is further divided into 2 subpartitions. In effect, the
entire table is divided into `3 * 2 = 6' partitions. However, due to the
action of the `PARTITION BY RANGE' clause, the first 2 of these store
only those records with a value less than 1990 in the `purchased'
column.

In MySQL 5.5, it is possible to subpartition tables that are
partitioned by `RANGE' or `LIST'. Subpartitions may use either `HASH'
or `KEY' partitioning.  This is also known as _composite partitioning_.

*Note*:

`SUBPARTITION BY HASH' and `SUBPARTITION BY KEY' generally follow the
same syntax rules as `PARTITION BY HASH' and `PARTITION BY KEY',
respectively. An exception to this is that `SUBPARTITION BY KEY'
(unlike `PARTITION BY KEY') does not currently support a default
column, so the column used for this purpose must be specified, even if
the table has an explicit primary key. This is a known issue which we
are working to address; see *Note
partitioning-limitations-subpartitions::, for more information and an
example.

It is also possible to define subpartitions explicitly using
`SUBPARTITION' clauses to specify options for individual subpartitions.
For example, a more verbose fashion of creating the same table `ts' as
shown in the previous example would be:

     CREATE TABLE ts (id INT, purchased DATE)
         PARTITION BY RANGE( YEAR(purchased) )
         SUBPARTITION BY HASH( TO_DAYS(purchased) ) (
             PARTITION p0 VALUES LESS THAN (1990) (
                 SUBPARTITION s0,
                 SUBPARTITION s1
             ),
             PARTITION p1 VALUES LESS THAN (2000) (
                 SUBPARTITION s2,
                 SUBPARTITION s3
             ),
             PARTITION p2 VALUES LESS THAN MAXVALUE (
                 SUBPARTITION s4,
                 SUBPARTITION s5
             )
         );

Some syntactical items of note are listed here:

   * Each partition must have the same number of subpartitions.

   * If you explicitly define any subpartitions using `SUBPARTITION' on
     any partition of a partitioned table, you must define them all. In
     other words, the following statement will fail:

          CREATE TABLE ts (id INT, purchased DATE)
              PARTITION BY RANGE( YEAR(purchased) )
              SUBPARTITION BY HASH( TO_DAYS(purchased) ) (
                  PARTITION p0 VALUES LESS THAN (1990) (
                      SUBPARTITION s0,
                      SUBPARTITION s1
                  ),
                  PARTITION p1 VALUES LESS THAN (2000),
                  PARTITION p2 VALUES LESS THAN MAXVALUE (
                      SUBPARTITION s2,
                      SUBPARTITION s3
                  )
              );

     This statement would still fail even if it included a
     `SUBPARTITIONS 2' clause.

   * Each `SUBPARTITION' clause must include (at a minimum) a name for
     the subpartition. Otherwise, you may set any desired option for
     the subpartition or allow it to assume its default setting for
     that option.

   * Subpartition names must be unique across the entire table.  For
     example, the following *Note `CREATE TABLE': create-table.
     statement is valid in MySQL 5.5:

          CREATE TABLE ts (id INT, purchased DATE)
              PARTITION BY RANGE( YEAR(purchased) )
              SUBPARTITION BY HASH( TO_DAYS(purchased) ) (
                  PARTITION p0 VALUES LESS THAN (1990) (
                      SUBPARTITION s0,
                      SUBPARTITION s1
                  ),
                  PARTITION p1 VALUES LESS THAN (2000) (
                      SUBPARTITION s2,
                      SUBPARTITION s3
                  ),
                  PARTITION p2 VALUES LESS THAN MAXVALUE (
                      SUBPARTITION s4,
                      SUBPARTITION s5
                  )
              );

Subpartitions can be used with especially large tables to distribute
data and indexes across many disks. Suppose that you have 6 disks
mounted as `/disk0', `/disk1', `/disk2', and so on. Now consider the
following example:

     CREATE TABLE ts (id INT, purchased DATE)
         PARTITION BY RANGE( YEAR(purchased) )
         SUBPARTITION BY HASH( TO_DAYS(purchased) ) (
             PARTITION p0 VALUES LESS THAN (1990) (
                 SUBPARTITION s0
                     DATA DIRECTORY = '/disk0/data'
                     INDEX DIRECTORY = '/disk0/idx',
                 SUBPARTITION s1
                     DATA DIRECTORY = '/disk1/data'
                     INDEX DIRECTORY = '/disk1/idx'
             ),
             PARTITION p1 VALUES LESS THAN (2000) (
                 SUBPARTITION s2
                     DATA DIRECTORY = '/disk2/data'
                     INDEX DIRECTORY = '/disk2/idx',
                 SUBPARTITION s3
                     DATA DIRECTORY = '/disk3/data'
                     INDEX DIRECTORY = '/disk3/idx'
             ),
             PARTITION p2 VALUES LESS THAN MAXVALUE (
                 SUBPARTITION s4
                     DATA DIRECTORY = '/disk4/data'
                     INDEX DIRECTORY = '/disk4/idx',
                 SUBPARTITION s5
                     DATA DIRECTORY = '/disk5/data'
                     INDEX DIRECTORY = '/disk5/idx'
             )
         );

In this case, a separate disk is used for the data and for the indexes
of each `RANGE'. Many other variations are possible; another example
might be:

     CREATE TABLE ts (id INT, purchased DATE)
         PARTITION BY RANGE(YEAR(purchased))
         SUBPARTITION BY HASH( TO_DAYS(purchased) ) (
             PARTITION p0 VALUES LESS THAN (1990) (
                 SUBPARTITION s0a
                     DATA DIRECTORY = '/disk0'
                     INDEX DIRECTORY = '/disk1',
                 SUBPARTITION s0b
                     DATA DIRECTORY = '/disk2'
                     INDEX DIRECTORY = '/disk3'
             ),
             PARTITION p1 VALUES LESS THAN (2000) (
                 SUBPARTITION s1a
                     DATA DIRECTORY = '/disk4/data'
                     INDEX DIRECTORY = '/disk4/idx',
                 SUBPARTITION s1b
                     DATA DIRECTORY = '/disk5/data'
                     INDEX DIRECTORY = '/disk5/idx'
             ),
             PARTITION p2 VALUES LESS THAN MAXVALUE (
                 SUBPARTITION s2a,
                 SUBPARTITION s2b
             )
         );

Here, the storage is as follows:

   * Rows with `purchased' dates from before 1990 take up a vast amount
     of space, so are split up 4 ways, with a separate disk dedicated
     to the data and to the indexes for each of the two subpartitions
     (`s0a' and `s0b') making up partition `p0'. In other words:

        * The data for subpartition `s0a' is stored on `/disk0'.

        * The indexes for subpartition `s0a' are stored on `/disk1'.

        * The data for subpartition `s0b' is stored on `/disk2'.

        * The indexes for subpartition `s0b' are stored on `/disk3'.

   * Rows containing dates ranging from 1990 to 1999 (partition `p1')
     do not require as much room as those from before 1990. These are
     split between 2 disks (`/disk4' and `/disk5') rather than 4 disks
     as with the legacy records stored in `p0':

        * Data and indexes belonging to `p1''s first subpartition
          (`s1a') are stored on `/disk4'--the data in `/disk4/data',
          and the indexes in `/disk4/idx'.

        * Data and indexes belonging to `p1''s second subpartition
          (`s1b') are stored on `/disk5'--the data in `/disk5/data',
          and the indexes in `/disk5/idx'.

   * Rows reflecting dates from the year 2000 to the present (partition
     `p2') do not take up as much space as required by either of the
     two previous ranges.  Currently, it is sufficient to store all of
     these in the default location.

     In future, when the number of purchases for the decade beginning
     with the year 2000 grows to a point where the default location no
     longer provides sufficient space, the corresponding rows can be
     moved using an `ALTER TABLE ... REORGANIZE PARTITION' statement.
     See *Note partitioning-management::, for an explanation of how
     this can be done.

The `DATA DIRECTORY' and `INDEX DIRECTORY' options are not permitted in
partition definitions when the `NO_DIR_IN_CREATE' server SQL mode is in
effect. Beginning with MySQL 5.5.5, these options are also not
permitted when defining subpartitions (Bug #42954).


File: manual.info,  Node: partitioning-handling-nulls,  Prev: partitioning-subpartitions,  Up: partitioning-types

18.2.7 How MySQL Partitioning Handles `NULL'
--------------------------------------------

Partitioning in MySQL does nothing to disallow `NULL' as the value of a
partitioning expression, whether it is a column value or the value of a
user-supplied expression. Even though it is permitted to use `NULL' as
the value of an expression that must otherwise yield an integer, it is
important to keep in mind that `NULL' is not a number. MySQL's
partitioning implementation treats `NULL' as being less than any
non-`NULL' value, just as `ORDER BY' does.

This means that treatment of `NULL' varies between partitioning of
different types, and may produce behavior which you do not expect if
you are not prepared for it.  This being the case, we discuss in this
section how each MySQL partitioning type handles `NULL' values when
determining the partition in which a row should be stored, and provide
examples for each.

Handling of `NULL' with `RANGE' partitioning

If you insert a row into a table partitioned by `RANGE' such that the
column value used to determine the partition is `NULL', the row is
inserted into the lowest partition. Consider these two tables in a
database named `p', created as follows:

     mysql> CREATE TABLE t1 (
         ->     c1 INT,
         ->     c2 VARCHAR(20)
         -> )
         -> PARTITION BY RANGE(c1) (
         ->     PARTITION p0 VALUES LESS THAN (0),
         ->     PARTITION p1 VALUES LESS THAN (10),
         ->     PARTITION p2 VALUES LESS THAN MAXVALUE
         -> );
     Query OK, 0 rows affected (0.09 sec)

     mysql> CREATE TABLE t2 (
         ->     c1 INT,
         ->     c2 VARCHAR(20)
         -> )
         -> PARTITION BY RANGE(c1) (
         ->     PARTITION p0 VALUES LESS THAN (-5),
         ->     PARTITION p1 VALUES LESS THAN (0),
         ->     PARTITION p2 VALUES LESS THAN (10),
         ->     PARTITION p3 VALUES LESS THAN MAXVALUE
         -> );
     Query OK, 0 rows affected (0.09 sec)

You can see the partitions created by these two *Note `CREATE TABLE':
create-table. statements using the following query against the *Note
`PARTITIONS': partitions-table. table in the `INFORMATION_SCHEMA'
database:

     mysql> SELECT TABLE_NAME, PARTITION_NAME, TABLE_ROWS, AVG_ROW_LENGTH, DATA_LENGTH
          >   FROM INFORMATION_SCHEMA.PARTITIONS
          >   WHERE TABLE_SCHEMA = 'p' AND TABLE_NAME LIKE 't_';
     +------------+----------------+------------+----------------+-------------+
     | TABLE_NAME | PARTITION_NAME | TABLE_ROWS | AVG_ROW_LENGTH | DATA_LENGTH |
     +------------+----------------+------------+----------------+-------------+
     | t1         | p0             |          0 |              0 |           0 |
     | t1         | p1             |          0 |              0 |           0 |
     | t1         | p2             |          0 |              0 |           0 |
     | t2         | p0             |          0 |              0 |           0 |
     | t2         | p1             |          0 |              0 |           0 |
     | t2         | p2             |          0 |              0 |           0 |
     | t2         | p3             |          0 |              0 |           0 |
     +------------+----------------+------------+----------------+-------------+
     7 rows in set (0.00 sec)

(For more information about this table, see *Note partitions-table::.)
Now let us populate each of these tables with a single row containing a
`NULL' in the column used as the partitioning key, and verify that the
rows were inserted using a pair of *Note `SELECT': select. statements:

     mysql> INSERT INTO t1 VALUES (NULL, 'mothra');
     Query OK, 1 row affected (0.00 sec)

     mysql> INSERT INTO t2 VALUES (NULL, 'mothra');
     Query OK, 1 row affected (0.00 sec)

     mysql> SELECT * FROM t1;
     +------+--------+
     | id   | name   |
     +------+--------+
     | NULL | mothra |
     +------+--------+
     1 row in set (0.00 sec)

     mysql> SELECT * FROM t2;
     +------+--------+
     | id   | name   |
     +------+--------+
     | NULL | mothra |
     +------+--------+
     1 row in set (0.00 sec)

You can see which partitions are used to store the inserted rows by
rerunning the previous query against *Note
`INFORMATION_SCHEMA.PARTITIONS': partitions-table. and inspecting the
output:

     mysql> SELECT TABLE_NAME, PARTITION_NAME, TABLE_ROWS, AVG_ROW_LENGTH, DATA_LENGTH
          >   FROM INFORMATION_SCHEMA.PARTITIONS
          >   WHERE TABLE_SCHEMA = 'p' AND TABLE_NAME LIKE 't_';
     +------------+----------------+------------+----------------+-------------+
     | TABLE_NAME | PARTITION_NAME | TABLE_ROWS | AVG_ROW_LENGTH | DATA_LENGTH |
     +------------+----------------+------------+----------------+-------------+
     _| t1         | p0             |          1 |             20 |          20 |_
     | t1         | p1             |          0 |              0 |           0 |
     | t1         | p2             |          0 |              0 |           0 |
     _| t2         | p0             |          1 |             20 |          20 |_
     | t2         | p1             |          0 |              0 |           0 |
     | t2         | p2             |          0 |              0 |           0 |
     | t2         | p3             |          0 |              0 |           0 |
     +------------+----------------+------------+----------------+-------------+
     7 rows in set (0.01 sec)

You can also demonstrate that these rows were stored in the lowest
partition of each table by dropping these partitions, and then
re-running the *Note `SELECT': select.  statements:

     mysql> ALTER TABLE t1 DROP PARTITION p0;
     Query OK, 0 rows affected (0.16 sec)

     mysql> ALTER TABLE t2 DROP PARTITION p0;
     Query OK, 0 rows affected (0.16 sec)

     mysql> SELECT * FROM t1;
     Empty set (0.00 sec)

     mysql> SELECT * FROM t2;
     Empty set (0.00 sec)

(For more information on `ALTER TABLE ... DROP PARTITION', see *Note
alter-table::.)

`NULL' is also treated in this way for partitioning expressions that
use SQL functions. Suppose that we define a table using a *Note `CREATE
TABLE': create-table. statement such as this one:

     CREATE TABLE tndate (
         id INT,
         dt DATE
     )
     PARTITION BY RANGE( YEAR(dt) ) (
         PARTITION p0 VALUES LESS THAN (1990),
         PARTITION p1 VALUES LESS THAN (2000),
         PARTITION p2 VALUES LESS THAN MAXVALUE
     );

As with other MySQL functions, `YEAR(NULL)' returns `NULL'. A row with
a `dt' column value of `NULL' is treated as though the partitioning
expression evaluated to a value less than any other value, and so is
inserted into partition `p0'.

Handling of `NULL' with `LIST' partitioning

A table that is partitioned by `LIST' admits `NULL' values if and only
if one of its partitions is defined using that value-list that contains
`NULL'. The converse of this is that a table partitioned by `LIST'
which does not explicitly use `NULL' in a value list rejects rows
resulting in a `NULL' value for the partitioning expression, as shown
in this example:

     mysql> CREATE TABLE ts1 (
         ->     c1 INT,
         ->     c2 VARCHAR(20)
         -> )
         -> PARTITION BY LIST(c1) (
         ->     PARTITION p0 VALUES IN (0, 3, 6),
         ->     PARTITION p1 VALUES IN (1, 4, 7),
         ->     PARTITION p2 VALUES IN (2, 5, 8)
         -> );
     Query OK, 0 rows affected (0.01 sec)

     mysql> INSERT INTO ts1 VALUES (9, 'mothra');
     `ERROR 1504 (HY000): Table has no partition for value 9'

     mysql> INSERT INTO ts1 VALUES (NULL, 'mothra');
     `ERROR 1504 (HY000): Table has no partition for value NULL'

Only rows having a `c1' value between `0' and `8' inclusive can be
inserted into `ts1'. `NULL' falls outside this range, just like the
number `9'. We can create tables `ts2' and `ts3' having value lists
containing `NULL', as shown here:

     mysql> CREATE TABLE ts2 (
         ->     c1 INT,
         ->     c2 VARCHAR(20)
         -> )
         -> PARTITION BY LIST(c1) (
         ->     PARTITION p0 VALUES IN (0, 3, 6),
         ->     PARTITION p1 VALUES IN (1, 4, 7),
         ->     PARTITION p2 VALUES IN (2, 5, 8),
         ->     PARTITION p3 VALUES IN (NULL)
         -> );
     Query OK, 0 rows affected (0.01 sec)

     mysql> CREATE TABLE ts3 (
         ->     c1 INT,
         ->     c2 VARCHAR(20)
         -> )
         -> PARTITION BY LIST(c1) (
         ->     PARTITION p0 VALUES IN (0, 3, 6),
         ->     PARTITION p1 VALUES IN (1, 4, 7, NULL),
         ->     PARTITION p2 VALUES IN (2, 5, 8)
         -> );
     Query OK, 0 rows affected (0.01 sec)

When defining value lists for partitioning, you can (and should) treat
`NULL' just as you would any other value.  For example, both `VALUES IN
(NULL)' and `VALUES IN (1, 4, 7, NULL)' are valid, as are `VALUES IN
(1, NULL, 4, 7)', `VALUES IN (NULL, 1, 4, 7)', and so on. You can
insert a row having `NULL' for column `c1' into each of the tables
`ts2' and `ts3':

     mysql> INSERT INTO ts2 VALUES (NULL, 'mothra');
     Query OK, 1 row affected (0.00 sec)

     mysql> INSERT INTO ts3 VALUES (NULL, 'mothra');
     Query OK, 1 row affected (0.00 sec)

By issuing the appropriate query against *Note
`INFORMATION_SCHEMA.PARTITIONS': partitions-table, you can determine
which partitions were used to store the rows just inserted (we assume,
as in the previous examples, that the partitioned tables were created
in the `p' database):

     mysql> SELECT TABLE_NAME, PARTITION_NAME, TABLE_ROWS, AVG_ROW_LENGTH, DATA_LENGTH
          >   FROM INFORMATION_SCHEMA.PARTITIONS
          >   WHERE TABLE_SCHEMA = 'p' AND TABLE_NAME LIKE 'ts_';
     +------------+----------------+------------+----------------+-------------+
     | TABLE_NAME | PARTITION_NAME | TABLE_ROWS | AVG_ROW_LENGTH | DATA_LENGTH |
     +------------+----------------+------------+----------------+-------------+
     | ts2        | p0             |          0 |              0 |           0 |
     | ts2        | p1             |          0 |              0 |           0 |
     | ts2        | p2             |          0 |              0 |           0 |
     _| ts2        | p3             |          1 |             20 |          20 |_
     | ts3        | p0             |          0 |              0 |           0 |
     _| ts3        | p1             |          1 |             20 |          20 |_
     | ts3        | p2             |          0 |              0 |           0 |
     +------------+----------------+------------+----------------+-------------+
     7 rows in set (0.01 sec)

As shown earlier in this section, you can also verify which partitions
were used for storing the rows by deleting these partitions and then
performing a *Note `SELECT': select.

Handling of `NULL' with `HASH' and `KEY' partitioning

`NULL' is handled somewhat differently for tables partitioned by `HASH'
or `KEY'. In these cases, any partition expression that yields a `NULL'
value is treated as though its return value were zero. We can verify
this behavior by examining the effects on the file system of creating a
table partitioned by `HASH' and populating it with a record containing
appropriate values.  Suppose that you have a table `th' (also in the
`p' database) created using the following statement:

     mysql> CREATE TABLE th (
         ->     c1 INT,
         ->     c2 VARCHAR(20)
         -> )
         -> PARTITION BY HASH(c1)
         -> PARTITIONS 2;
     Query OK, 0 rows affected (0.00 sec)

The partitions belonging to this table can be viewed using the query
shown here:

     mysql> SELECT TABLE_NAME,PARTITION_NAME,TABLE_ROWS,AVG_ROW_LENGTH,DATA_LENGTH
          >   FROM INFORMATION_SCHEMA.PARTITIONS
          >   WHERE TABLE_SCHEMA = 'p' AND TABLE_NAME ='th';
     +------------+----------------+------------+----------------+-------------+
     | TABLE_NAME | PARTITION_NAME | TABLE_ROWS | AVG_ROW_LENGTH | DATA_LENGTH |
     +------------+----------------+------------+----------------+-------------+
     | th         | p0             |          0 |              0 |           0 |
     | th         | p1             |          0 |              0 |           0 |
     +------------+----------------+------------+----------------+-------------+
     2 rows in set (0.00 sec)

Note that `TABLE_ROWS' for each partition is 0.  Now insert two rows
into `th' whose `c1' column values are `NULL' and 0, and verify that
these rows were inserted, as shown here:

     mysql> INSERT INTO th VALUES (NULL, 'mothra'), (0, 'gigan');
     Query OK, 1 row affected (0.00 sec)

     mysql> SELECT * FROM th;
     +------+---------+
     | c1   | c2      |
     +------+---------+
     | NULL | mothra  |
     +------+---------+
     |    0 | gigan   |
     +------+---------+
     2 rows in set (0.01 sec)

Recall that for any integer N, the value of `NULL MOD N' is always
`NULL'. For tables that are partitioned by `HASH' or `KEY', this result
is treated for determining the correct partition as `0'. Checking the
*Note `INFORMATION_SCHEMA.PARTITIONS': partitions-table. table once
again, we can see that both rows were inserted into partition `p0':

     mysql> SELECT TABLE_NAME, PARTITION_NAME, TABLE_ROWS, AVG_ROW_LENGTH, DATA_LENGTH
          >   FROM INFORMATION_SCHEMA.PARTITIONS
          >   WHERE TABLE_SCHEMA = 'p' AND TABLE_NAME ='th';
     +------------+----------------+------------+----------------+-------------+
     | TABLE_NAME | PARTITION_NAME | TABLE_ROWS | AVG_ROW_LENGTH | DATA_LENGTH |
     +------------+----------------+------------+----------------+-------------+
     _| th         | p0             |          2 |             20 |          20 |_
     | th         | p1             |          0 |              0 |           0 |
     +------------+----------------+------------+----------------+-------------+
     2 rows in set (0.00 sec)

If you repeat this example using `PARTITION BY KEY' in place of
`PARTITION BY HASH' in the definition of the table, you can verify
easily that `NULL' is also treated like 0 for this type of partitioning.


File: manual.info,  Node: partitioning-management,  Next: partitioning-pruning,  Prev: partitioning-types,  Up: partitioning

18.3 Partition Management
=========================

* Menu:

* partitioning-management-range-list::  Management of `RANGE' and `LIST' Partitions
* partitioning-management-hash-key::  Management of `HASH' and `KEY' Partitions
* partitioning-maintenance::     Maintenance of Partitions
* partitioning-info::            Obtaining Information About Partitions

MySQL 5.5 provides a number of ways to modify partitioned tables. It is
possible to add, drop, redefine, merge, or split existing partitions.
All of these actions can be carried out using the partitioning
extensions to the *Note `ALTER TABLE':
alter-table-partition-operations. statement. There are also ways to
obtain information about partitioned tables and partitions. We discuss
these topics in the sections that follow.

   * For information about partition management in tables partitioned
     by `RANGE' or `LIST', see *Note
     partitioning-management-range-list::.

   * For a discussion of managing `HASH' and `KEY' partitions, see
     *Note partitioning-management-hash-key::.

   * See *Note partitioning-info::, for a discussion of mechanisms
     provided in MySQL 5.5 for obtaining information about partitioned
     tables and partitions.

   * For a discussion of performing maintenance operations on
     partitions, see *Note partitioning-maintenance::.

*Note*:

In MySQL 5.5, all partitions of a partitioned table must have the same
number of subpartitions, and it is not possible to change the
subpartitioning once the table has been created.

To change a table's partitioning scheme, it is necessary only to use the
*Note `ALTER TABLE': alter-table-partition-operations. statement with a
PARTITION_OPTIONS clause. This clause has the same syntax as that as
used with *Note `CREATE TABLE': create-table. for creating a
partitioned table, and always begins with the keywords `PARTITION BY'.
Suppose that you have a table partitioned by range using the following
*Note `CREATE TABLE': create-table. statement:

     CREATE TABLE trb3 (id INT, name VARCHAR(50), purchased DATE)
         PARTITION BY RANGE( YEAR(purchased) ) (
             PARTITION p0 VALUES LESS THAN (1990),
             PARTITION p1 VALUES LESS THAN (1995),
             PARTITION p2 VALUES LESS THAN (2000),
             PARTITION p3 VALUES LESS THAN (2005)
         );

To repartition this table so that it is partitioned by key into two
partitions using the `id' column value as the basis for the key, you
can use this statement:

     ALTER TABLE trb3 PARTITION BY KEY(id) PARTITIONS 2;

This has the same effect on the structure of the table as dropping the
table and re-creating it using `CREATE TABLE trb3 PARTITION BY KEY(id)
PARTITIONS 2;'.

`ALTER TABLE ... ENGINE = ...' changes only the storage engine used by
the table, and leaves the table's partitioning scheme intact. Use
`ALTER TABLE ... REMOVE PARTITIONING' to remove a table's partitioning.
See *Note alter-table::.

*Important*:

Only a single `PARTITION BY', `ADD PARTITION', `DROP PARTITION',
`REORGANIZE PARTITION', or `COALESCE PARTITION' clause can be used in a
given *Note `ALTER TABLE': alter-table-partition-operations. statement.
If you (for example) wish to drop a partition and reorganize a table's
remaining partitions, you must do so in two separate *Note `ALTER
TABLE': alter-table-partition-operations. statements (one using `DROP
PARTITION' and then a second one using `REORGANIZE PARTITIONS').

Beginning with MySQL 5.5.0, it is possible to delete all rows from one
or more selected partitions using *Note `ALTER TABLE ... TRUNCATE
PARTITION': alter-table.


File: manual.info,  Node: partitioning-management-range-list,  Next: partitioning-management-hash-key,  Prev: partitioning-management,  Up: partitioning-management

18.3.1 Management of `RANGE' and `LIST' Partitions
--------------------------------------------------

Range and list partitions are very similar with regard to how the
adding and dropping of partitions are handled. For this reason we
discuss the management of both sorts of partitioning in this section.
For information about working with tables that are partitioned by hash
or key, see *Note partitioning-management-hash-key::. Dropping a
`RANGE' or `LIST' partition is more straightforward than adding one, so
we discuss this first.

Dropping a partition from a table that is partitioned by either `RANGE'
or by `LIST' can be accomplished using the *Note `ALTER TABLE':
alter-table-partition-operations. statement with a `DROP PARTITION'
clause. Here is a very basic example, which supposes that you have
already created a table which is partitioned by range and then
populated with 10 records using the following *Note `CREATE TABLE':
create-table. and *Note `INSERT': insert. statements:

     mysql> CREATE TABLE tr (id INT, name VARCHAR(50), purchased DATE)
         ->     PARTITION BY RANGE( YEAR(purchased) ) (
         ->         PARTITION p0 VALUES LESS THAN (1990),
         ->         PARTITION p1 VALUES LESS THAN (1995),
         ->         PARTITION p2 VALUES LESS THAN (2000),
         ->         PARTITION p3 VALUES LESS THAN (2005)
         ->     );
     Query OK, 0 rows affected (0.01 sec)

     mysql> INSERT INTO tr VALUES
         ->     (1, 'desk organiser', '2003-10-15'),
         ->     (2, 'CD player', '1993-11-05'),
         ->     (3, 'TV set', '1996-03-10'),
         ->     (4, 'bookcase', '1982-01-10'),
         ->     (5, 'exercise bike', '2004-05-09'),
         ->     (6, 'sofa', '1987-06-05'),
         ->     (7, 'popcorn maker', '2001-11-22'),
         ->     (8, 'aquarium', '1992-08-04'),
         ->     (9, 'study desk', '1984-09-16'),
         ->     (10, 'lava lamp', '1998-12-25');
     Query OK, 10 rows affected (0.01 sec)

You can see which items should have been inserted into partition `p2'
as shown here:

     mysql> SELECT * FROM tr
         -> WHERE purchased BETWEEN '1995-01-01' AND '1999-12-31';
     +------+-----------+------------+
     | id   | name      | purchased  |
     +------+-----------+------------+
     |    3 | TV set    | 1996-03-10 |
     |   10 | lava lamp | 1998-12-25 |
     +------+-----------+------------+
     2 rows in set (0.00 sec)

To drop the partition named `p2', execute the following command:

     mysql> ALTER TABLE tr DROP PARTITION p2;
     Query OK, 0 rows affected (0.03 sec)

*Note*:

The *Note `NDBCLUSTER': mysql-cluster. storage engine does not support
`ALTER TABLE ... DROP PARTITION'. It does, however, support the other
partitioning-related extensions to *Note `ALTER TABLE':
alter-table-partition-operations. that are described in this chapter.

It is very important to remember that, _when you drop a partition, you
also delete all the data that was stored in that partition_. You can
see that this is the case by re-running the previous *Note `SELECT':
select.  query:

     mysql> SELECT * FROM tr WHERE purchased
         -> BETWEEN '1995-01-01' AND '1999-12-31';
     Empty set (0.00 sec)

Because of this, you must have the `DROP' privilege for a table before
you can execute `ALTER TABLE ... DROP PARTITION' on that table.

If you wish to drop all data from all partitions while preserving the
table definition and its partitioning scheme, use the *Note `TRUNCATE
TABLE': truncate-table. statement.  (See *Note truncate-table::.)

If you intend to change the partitioning of a table _without_ losing
data, use `ALTER TABLE ... REORGANIZE PARTITION' instead. See below or
in *Note alter-table::, for information about `REORGANIZE PARTITION'.

If you now execute a *Note `SHOW CREATE TABLE': show-create-table.
statement, you can see how the partitioning makeup of the table has
been changed:

     mysql> SHOW CREATE TABLE tr\G
     *************************** 1. row ***************************
            Table: tr
     Create Table: CREATE TABLE `tr` (
       `id` int(11) default NULL,
       `name` varchar(50) default NULL,
       `purchased` date default NULL
     ) ENGINE=MyISAM DEFAULT CHARSET=latin1
     PARTITION BY RANGE ( YEAR(purchased) ) (
       PARTITION p0 VALUES LESS THAN (1990) ENGINE = MyISAM,
       PARTITION p1 VALUES LESS THAN (1995) ENGINE = MyISAM,
       PARTITION p3 VALUES LESS THAN (2005) ENGINE = MyISAM
     )
     1 row in set (0.01 sec)

When you insert new rows into the changed table with `purchased' column
values between `'1995-01-01'' and `'2004-12-31'' inclusive, those rows
will be stored in partition `p3'. You can verify this as follows:

     mysql> INSERT INTO tr VALUES (11, 'pencil holder', '1995-07-12');
     Query OK, 1 row affected (0.00 sec)

     mysql> SELECT * FROM tr WHERE purchased
         -> BETWEEN '1995-01-01' AND '2004-12-31';
     +------+----------------+------------+
     | id   | name           | purchased  |
     +------+----------------+------------+
     |   11 | pencil holder  | 1995-07-12 |
     |    1 | desk organiser | 2003-10-15 |
     |    5 | exercise bike  | 2004-05-09 |
     |    7 | popcorn maker  | 2001-11-22 |
     +------+----------------+------------+
     4 rows in set (0.00 sec)

     mysql> ALTER TABLE tr DROP PARTITION p3;
     Query OK, 0 rows affected (0.03 sec)

     mysql> SELECT * FROM tr WHERE purchased
         -> BETWEEN '1995-01-01' AND '2004-12-31';
     Empty set (0.00 sec)

Note that the number of rows dropped from the table as a result of
`ALTER TABLE ... DROP PARTITION' is not reported by the server as it
would be by the equivalent *Note `DELETE': delete. query.

Dropping `LIST' partitions uses exactly the same `ALTER TABLE ... DROP
PARTITION' syntax as used for dropping `RANGE' partitions. However,
there is one important difference in the effect this has on your use of
the table afterward: You can no longer insert into the table any rows
having any of the values that were included in the value list defining
the deleted partition. (See *Note partitioning-list::, for an example.)

To add a new range or list partition to a previously partitioned table,
use the `ALTER TABLE ... ADD PARTITION' statement. For tables which are
partitioned by `RANGE', this can be used to add a new range to the end
of the list of existing partitions. Suppose that you have a partitioned
table containing membership data for your organization, which is
defined as follows:

     CREATE TABLE members (
         id INT,
         fname VARCHAR(25),
         lname VARCHAR(25),
         dob DATE
     )
     PARTITION BY RANGE( YEAR(dob) ) (
         PARTITION p0 VALUES LESS THAN (1970),
         PARTITION p1 VALUES LESS THAN (1980),
         PARTITION p2 VALUES LESS THAN (1990)
     );

Suppose further that the minimum age for members is 16. As the calendar
approaches the end of 2005, you realize that you will soon be admitting
members who were born in 1990 (and later in years to come). You can
modify the `members' table to accommodate new members born in the years
1990 to 1999 as shown here:

     ALTER TABLE members ADD PARTITION (PARTITION p3 VALUES LESS THAN (2000));

With tables that are partitioned by range, you can use `ADD PARTITION'
to add new partitions to the high end of the partitions list only.
Trying to add a new partition in this manner between or before existing
partitions results in an error as shown here:

     mysql> ALTER TABLE members
          >     ADD PARTITION (
          >     PARTITION n VALUES LESS THAN (1960));
     ERROR 1463 (HY000): VALUES LESS THAN value must be strictly »
        increasing for each partition

You can work around this problem by reorganizing the first partition
into two new ones that split the range between them, like this:

     ALTER TABLE members
         REORGANIZE PARTITION p0 INTO (
             PARTITION n0 VALUES LESS THAN (1960),
             PARTITION n1 VALUES LESS THAN (1970)
     );

Using *Note `SHOW CREATE TABLE': show-create-table. you can see that
the `ALTER TABLE' statement has had the desired effect:

     mysql> SHOW CREATE TABLE members\G
     *************************** 1. row ***************************
            Table: members
     Create Table: CREATE TABLE `members` (
       `id` int(11) DEFAULT NULL,
       `fname` varchar(25) DEFAULT NULL,
       `lname` varchar(25) DEFAULT NULL,
       `dob` date DEFAULT NULL
     ) ENGINE=InnoDB DEFAULT CHARSET=latin1
     /*!50100 PARTITION BY RANGE ( YEAR(dob))
     (PARTITION n0 VALUES LESS THAN (1960) ENGINE = InnoDB,
      PARTITION n1 VALUES LESS THAN (1970) ENGINE = InnoDB,
      PARTITION p1 VALUES LESS THAN (1980) ENGINE = InnoDB,
      PARTITION p2 VALUES LESS THAN (1990) ENGINE = InnoDB,
      PARTITION p3 VALUES LESS THAN (2000) ENGINE = InnoDB) */
     1 row in set (0.00 sec)

See also *Note alter-table-partition-operations::.

You can also use `ALTER TABLE ... ADD PARTITION' to add new partitions
to a table that is partitioned by `LIST'. Suppose a table `tt' is
defined using the following *Note `CREATE TABLE': create-table.
statement:

     CREATE TABLE tt (
         id INT,
         data INT
     )
     PARTITION BY LIST(data) (
         PARTITION p0 VALUES IN (5, 10, 15),
         PARTITION p1 VALUES IN (6, 12, 18)
     );

You can add a new partition in which to store rows having the `data'
column values `7', `14', and `21' as shown:

     ALTER TABLE tt ADD PARTITION (PARTITION p2 VALUES IN (7, 14, 21));

Note that you _cannot_ add a new `LIST' partition encompassing any
values that are already included in the value list of an existing
partition.  If you attempt to do so, an error will result:

     mysql> ALTER TABLE tt ADD PARTITION
          >     (PARTITION np VALUES IN (4, 8, 12));
     ERROR 1465 (HY000): Multiple definition of same constant »
                         in list partitioning

Because any rows with the `data' column value `12' have already been
assigned to partition `p1', you cannot create a new partition on table
`tt' that includes `12' in its value list. To accomplish this, you
could drop `p1', and add `np' and then a new `p1' with a modified
definition. However, as discussed earlier, this would result in the
loss of all data stored in `p1'--and it is often the case that this is
not what you really want to do. Another solution might appear to be to
make a copy of the table with the new partitioning and to copy the data
into it using *Note `CREATE TABLE ... SELECT ...': create-table, then
drop the old table and rename the new one, but this could be very
time-consuming when dealing with a large amounts of data. This also
might not be feasible in situations where high availability is a
requirement.

You can add multiple partitions in a single `ALTER TABLE ... ADD
PARTITION' statement as shown here:

     CREATE TABLE employees (
       id INT NOT NULL,
       fname VARCHAR(50) NOT NULL,
       lname VARCHAR(50) NOT NULL,
       hired DATE NOT NULL
     )
     PARTITION BY RANGE( YEAR(hired) ) (
       PARTITION p1 VALUES LESS THAN (1991),
       PARTITION p2 VALUES LESS THAN (1996),
       PARTITION p3 VALUES LESS THAN (2001),
       PARTITION p4 VALUES LESS THAN (2005)
     );

     ALTER TABLE employees ADD PARTITION (
         PARTITION p5 VALUES LESS THAN (2010),
         PARTITION p6 VALUES LESS THAN MAXVALUE
     );

Fortunately, MySQL's partitioning implementation provides ways to
redefine partitions without losing data. Let us look first at a couple
of simple examples involving `RANGE' partitioning. Recall the `members'
table which is now defined as shown here:

     mysql> SHOW CREATE TABLE members\G
     *************************** 1. row ***************************
            Table: members
     Create Table: CREATE TABLE `members` (
       `id` int(11) default NULL,
       `fname` varchar(25) default NULL,
       `lname` varchar(25) default NULL,
       `dob` date default NULL
     ) ENGINE=MyISAM DEFAULT CHARSET=latin1
     PARTITION BY RANGE ( YEAR(dob) ) (
       PARTITION p0 VALUES LESS THAN (1970) ENGINE = MyISAM,
       PARTITION p1 VALUES LESS THAN (1980) ENGINE = MyISAM,
       PARTITION p2 VALUES LESS THAN (1990) ENGINE = MyISAM.
       PARTITION p3 VALUES LESS THAN (2000) ENGINE = MyISAM
     )

Suppose that you would like to move all rows representing members born
before 1960 into a separate partition. As we have already seen, this
cannot be done using *Note `ALTER TABLE ... ADD PARTITION':
alter-table-partition-operations. However, you can use another
partition-related extension to *Note `ALTER TABLE':
alter-table-partition-operations. to accomplish this:

     ALTER TABLE members REORGANIZE PARTITION p0 INTO (
         PARTITION s0 VALUES LESS THAN (1960),
         PARTITION s1 VALUES LESS THAN (1970)
     );

In effect, this command splits partition `p0' into two new partitions
`s0' and `s1'. It also moves the data that was stored in `p0' into the
new partitions according to the rules embodied in the two `PARTITION
... VALUES ...' clauses, so that `s0' contains only those records for
which `YEAR(dob)' is less than 1960 and `s1' contains those rows in
which `YEAR(dob)' is greater than or equal to 1960 but less than 1970.

A `REORGANIZE PARTITION' clause may also be used for merging adjacent
partitions. You can return the `members' table to its previous
partitioning as shown here:

     ALTER TABLE members REORGANIZE PARTITION s0,s1 INTO (
         PARTITION p0 VALUES LESS THAN (1970)
     );

No data is lost in splitting or merging partitions using `REORGANIZE
PARTITION'. In executing the above statement, MySQL moves all of the
records that were stored in partitions `s0' and `s1' into partition
`p0'.

The general syntax for `REORGANIZE PARTITION' is shown here:

     ALTER TABLE TBL_NAME
         REORGANIZE PARTITION PARTITION_LIST
         INTO (PARTITION_DEFINITIONS);

Here, TBL_NAME is the name of the partitioned table, and PARTITION_LIST
is a comma-separated list of names of one or more existing partitions
to be changed.  PARTITION_DEFINITIONS is a comma-separated list of new
partition definitions, which follow the same rules as for the
PARTITION_DEFINITIONS list used in *Note `CREATE TABLE': create-table.
(see *Note create-table::). It should be noted that you are not limited
to merging several partitions into one, or to splitting one partition
into many, when using `REORGANIZE PARTITION'. For example, you can
reorganize all four partitions of the `members' table into two, as
follows:

     ALTER TABLE members REORGANIZE PARTITION p0,p1,p2,p3 INTO (
         PARTITION m0 VALUES LESS THAN (1980),
         PARTITION m1 VALUES LESS THAN (2000)
     );

You can also use `REORGANIZE PARTITION' with tables that are
partitioned by `LIST'. Let us return to the problem of adding a new
partition to the list-partitioned `tt' table and failing because the
new partition had a value that was already present in the value-list of
one of the existing partitions. We can handle this by adding a
partition that contains only nonconflicting values, and then
reorganizing the new partition and the existing one so that the value
which was stored in the existing one is now moved to the new one:

     ALTER TABLE tt ADD PARTITION (PARTITION np VALUES IN (4, 8));
     ALTER TABLE tt REORGANIZE PARTITION p1,np INTO (
         PARTITION p1 VALUES IN (6, 18),
         PARTITION np VALUES in (4, 8, 12)
     );

Here are some key points to keep in mind when using `ALTER TABLE ...
REORGANIZE PARTITION' to repartition tables that are partitioned by
`RANGE' or `LIST':

   * The `PARTITION' clauses used to determine the new partitioning
     scheme are subject to the same rules as those used with a *Note
     `CREATE TABLE': create-table. statement.

     Most importantly, you should remember that the new partitioning
     scheme cannot have any overlapping ranges (applies to tables
     partitioned by `RANGE') or sets of values (when reorganizing
     tables partitioned by `LIST').

   * The combination of partitions in the PARTITION_DEFINITIONS list
     should account for the same range or set of values overall as the
     combined partitions named in the PARTITION_LIST.

     For instance, in the `members' table used as an example in this
     section, partitions `p1' and `p2' together cover the years 1980
     through 1999. Therefore, any reorganization of these two
     partitions should cover the same range of years overall.

   * For tables partitioned by `RANGE', you can reorganize only
     adjacent partitions; you cannot skip over range partitions.

     For instance, you could not reorganize the `members' table used as
     an example in this section using a statement beginning with `ALTER
     TABLE members REORGANIZE PARTITION p0,p2 INTO ...' because `p0'
     covers the years prior to 1970 and `p2' the years from 1990
     through 1999 inclusive, and thus the two are not adjacent
     partitions.

   * You cannot use `REORGANIZE PARTITION' to change the table's
     partitioning type; that is, you cannot (for example) change
     `RANGE' partitions to `HASH' partitions or _vice versa_. You also
     cannot use this command to change the partitioning expression or
     column. To accomplish either of these tasks without dropping and
     re-creating the table, you can use *Note `ALTER TABLE ...
     PARTITION BY ...': alter-table-partition-operations. For example:

          ALTER TABLE members
              PARTITION BY HASH( YEAR(dob) )
              PARTITIONS 8;


File: manual.info,  Node: partitioning-management-hash-key,  Next: partitioning-maintenance,  Prev: partitioning-management-range-list,  Up: partitioning-management

18.3.2 Management of `HASH' and `KEY' Partitions
------------------------------------------------

Tables which are partitioned by hash or by key are very similar to one
another with regard to making changes in a partitioning setup, and both
differ in a number of ways from tables which have been partitioned by
range or list. For that reason, this section addresses the modification
of tables partitioned by hash or by key only. For a discussion of
adding and dropping of partitions of tables that are partitioned by
range or list, see *Note partitioning-management-range-list::.

You cannot drop partitions from tables that are partitioned by `HASH'
or `KEY' in the same way that you can from tables that are partitioned
by `RANGE' or `LIST'. However, you can merge `HASH' or `KEY' partitions
using the `ALTER TABLE ... COALESCE PARTITION' statement. Suppose that
you have a table containing data about clients, which is divided into
twelve partitions. The `clients' table is defined as shown here:

     CREATE TABLE clients (
         id INT,
         fname VARCHAR(30),
         lname VARCHAR(30),
         signed DATE
     )
     PARTITION BY HASH( MONTH(signed) )
     PARTITIONS 12;

To reduce the number of partitions from twelve to eight, execute the
following *Note `ALTER TABLE': alter-table-partition-operations.
command:

     mysql> ALTER TABLE clients COALESCE PARTITION 4;
     Query OK, 0 rows affected (0.02 sec)

`COALESCE' works equally well with tables that are partitioned by
`HASH', `KEY', `LINEAR HASH', or `LINEAR KEY'. Here is an example
similar to the previous one, differing only in that the table is
partitioned by `LINEAR KEY':

     mysql> CREATE TABLE clients_lk (
         ->     id INT,
         ->     fname VARCHAR(30),
         ->     lname VARCHAR(30),
         ->     signed DATE
         -> )
         -> PARTITION BY LINEAR KEY(signed)
         -> PARTITIONS 12;
     Query OK, 0 rows affected (0.03 sec)

     mysql> ALTER TABLE clients_lk COALESCE PARTITION 4;
     Query OK, 0 rows affected (0.06 sec)
     Records: 0  Duplicates: 0  Warnings: 0

Note that the number following `COALESCE PARTITION' is the number of
partitions to merge into the remainder--in other words, it is the
number of partitions to remove from the table.

If you attempt to remove more partitions than the table has, the result
is an error like the one shown:

     mysql> ALTER TABLE clients COALESCE PARTITION 18;
     ERROR 1478 (HY000): Cannot remove all partitions, use DROP TABLE instead

To increase the number of partitions for the `clients' table from 12 to
18. use `ALTER TABLE ... ADD PARTITION' as shown here:

     ALTER TABLE clients ADD PARTITION PARTITIONS 6;


File: manual.info,  Node: partitioning-maintenance,  Next: partitioning-info,  Prev: partitioning-management-hash-key,  Up: partitioning-management

18.3.3 Maintenance of Partitions
--------------------------------

A number of table and partition maintenance tasks can be carried out
using SQL statements intended for such purposes on partitioned tables
in MySQL 5.5.

Table maintenance of partitioned tables can be accomplished using the
statements *Note `CHECK TABLE': check-table, *Note `OPTIMIZE TABLE':
optimize-table, *Note `ANALYZE TABLE': analyze-table, and *Note `REPAIR
TABLE': repair-table, which are supported for partitioned tables.

You can use a number of extensions to *Note `ALTER TABLE':
alter-table-partition-operations. for performing operations of this
type on one or more partitions directly, as described in the following
list:

   * Rebuilding partitions

     Rebuilds the partition; this has the same effect as dropping all
     records stored in the partition, then reinserting them. This can
     be useful for purposes of defragmentation.

     Example:

          ALTER TABLE t1 REBUILD PARTITION p0, p1;

   * Optimizing partitions

     If you have deleted a large number of rows from a partition or if
     you have made many changes to a partitioned table with
     variable-length rows (that is, having `VARCHAR', `BLOB', or `TEXT'
     columns), you can use `ALTER TABLE ... OPTIMIZE PARTITION' to
     reclaim any unused space and to defragment the partition data file.

     Example:

          ALTER TABLE t1 OPTIMIZE PARTITION p0, p1;

     Using `OPTIMIZE PARTITION' on a given partition is equivalent to
     running `CHECK PARTITION', `ANALYZE PARTITION', and `REPAIR
     PARTITION' on that partition.

     Some MySQL storage engines, including *Note `InnoDB':
     innodb-storage-engine, do not support per-partition optimization;
     in these cases, *Note `ALTER TABLE ... OPTIMIZE PARTITION':
     alter-table-partition-operations. rebuilds the entire table. In
     MySQL 5.5.30 and later, running this statement on such a table
     causes the entire table to rebuilt and analyzed, and an
     appropriate warning to be issued. (Bug #11751825, Bug #42822) Use
     `ALTER TABLE ... REBUILD PARTITION' and `ALTER TABLE ... ANALYZE
     PARTITION' instead, to avoid this issue.

   * Analyzing partitions

     This reads and stores the key distributions for partitions.

     Example:

          ALTER TABLE t1 ANALYZE PARTITION p3;

   * Repairing partitions

     This repairs corrupted partitions.

     Example:

          ALTER TABLE t1 REPAIR PARTITION p0,p1;

   * Checking partitions

     You can check partitions for errors in much the same way that you
     can use `CHECK TABLE' with nonpartitioned tables.

     Example:

          ALTER TABLE trb3 CHECK PARTITION p1;

     This command will tell you if the data or indexes in partition
     `p1' of table `t1' are corrupted. If this is the case, use `ALTER
     TABLE ... REPAIR PARTITION' to repair the partition.

Each of the statements in the list just shown also supports the keyword
`ALL' in place of the list of partition names. Using `ALL' causes the
statement to act on all partitions in the table.

The use of *Note `mysqlcheck': mysqlcheck. and *Note `myisamchk':
myisamchk. is not supported with partitioned tables.

Beginning with MySQL 5.5.0, you can also truncate partitions using
*Note `ALTER TABLE ... TRUNCATE PARTITION': alter-table. This statement
can be used to delete all rows from one or more partitions in much the
same way that *Note `TRUNCATE TABLE': truncate-table. deletes all rows
from a table.

*Note `ALTER TABLE ... TRUNCATE PARTITION ALL': alter-table. truncates
all partitions in the table.


File: manual.info,  Node: partitioning-info,  Prev: partitioning-maintenance,  Up: partitioning-management

18.3.4 Obtaining Information About Partitions
---------------------------------------------

This section discusses obtaining information about existing partitions,
which can be done in a number of ways. Methods of obtaining such
information include the following:

   * Using the *Note `SHOW CREATE TABLE': show-create-table.  statement
     to view the partitioning clauses used in creating a partitioned
     table.

   * Using the *Note `SHOW TABLE STATUS': show-table-status.  statement
     to determine whether a table is partitioned.

   * Querying the *Note `INFORMATION_SCHEMA.PARTITIONS':
     partitions-table.  table.

   * Using the statement *Note `EXPLAIN PARTITIONS SELECT': explain. to
     see which partitions are used by a given *Note `SELECT': select.

As discussed elsewhere in this chapter, *Note `SHOW CREATE TABLE':
show-create-table. includes in its output the `PARTITION BY' clause
used to create a partitioned table. For example:

     mysql> SHOW CREATE TABLE trb3\G
     *************************** 1. row ***************************
            Table: trb3
     Create Table: CREATE TABLE `trb3` (
       `id` int(11) default NULL,
       `name` varchar(50) default NULL,
       `purchased` date default NULL
     ) ENGINE=MyISAM DEFAULT CHARSET=latin1
     PARTITION BY RANGE (YEAR(purchased)) (
       PARTITION p0 VALUES LESS THAN (1990) ENGINE = MyISAM,
       PARTITION p1 VALUES LESS THAN (1995) ENGINE = MyISAM,
       PARTITION p2 VALUES LESS THAN (2000) ENGINE = MyISAM,
       PARTITION p3 VALUES LESS THAN (2005) ENGINE = MyISAM
     )
     1 row in set (0.00 sec)

The output from *Note `SHOW TABLE STATUS': show-table-status.  for
partitioned tables is the same as that for nonpartitioned tables,
except that the `Create_options' column contains the string
`partitioned'. The `Engine' column contains the name of the storage
engine used by all partitions of the table. (See *Note
show-table-status::, for more information about this statement.)

You can also obtain information about partitions from
`INFORMATION_SCHEMA', which contains a *Note `PARTITIONS':
partitions-table. table. See *Note partitions-table::.

It is possible to determine which partitions of a partitioned table are
involved in a given *Note `SELECT': select. query using *Note `EXPLAIN
PARTITIONS': explain. The `PARTITIONS' keyword adds a `partitions'
column to the output of *Note `EXPLAIN': explain. listing the partitions
from which records would be matched by the query.

Suppose that you have a table `trb1' created and populated as follows:

     CREATE TABLE trb1 (id INT, name VARCHAR(50), purchased DATE)
         PARTITION BY RANGE(id)
         (
             PARTITION p0 VALUES LESS THAN (3),
             PARTITION p1 VALUES LESS THAN (7),
             PARTITION p2 VALUES LESS THAN (9),
             PARTITION p3 VALUES LESS THAN (11)
         );

     INSERT INTO trb1 VALUES
         (1, 'desk organiser', '2003-10-15'),
         (2, 'CD player', '1993-11-05'),
         (3, 'TV set', '1996-03-10'),
         (4, 'bookcase', '1982-01-10'),
         (5, 'exercise bike', '2004-05-09'),
         (6, 'sofa', '1987-06-05'),
         (7, 'popcorn maker', '2001-11-22'),
         (8, 'aquarium', '1992-08-04'),
         (9, 'study desk', '1984-09-16'),
         (10, 'lava lamp', '1998-12-25');

You can see which partitions are used in a query such as `SELECT * FROM
trb1;', as shown here:

     mysql> EXPLAIN PARTITIONS SELECT * FROM trb1\G
     *************************** 1. row ***************************
                id: 1
       select_type: SIMPLE
             table: trb1
        partitions: p0,p1,p2,p3
              type: ALL
     possible_keys: NULL
               key: NULL
           key_len: NULL
               ref: NULL
              rows: 10
             Extra: Using filesort

In this case, all four partitions are searched. However, when a
limiting condition making use of the partitioning key is added to the
query, you can see that only those partitions containing matching
values are scanned, as shown here:

     mysql> EXPLAIN PARTITIONS SELECT * FROM trb1 WHERE id < 5\G
     *************************** 1. row ***************************
                id: 1
       select_type: SIMPLE
             table: trb1
        partitions: p0,p1
              type: ALL
     possible_keys: NULL
               key: NULL
           key_len: NULL
               ref: NULL
              rows: 10
             Extra: Using where

*Note `EXPLAIN PARTITIONS': explain. provides information about keys
used and possible keys, just as with the standard *Note `EXPLAIN
SELECT': explain. statement:

     mysql> ALTER TABLE trb1 ADD PRIMARY KEY (id);
     Query OK, 10 rows affected (0.03 sec)
     Records: 10  Duplicates: 0  Warnings: 0

     mysql> EXPLAIN PARTITIONS SELECT * FROM trb1 WHERE id < 5\G
     *************************** 1. row ***************************
                id: 1
       select_type: SIMPLE
             table: trb1
        partitions: p0,p1
              type: range
     possible_keys: PRIMARY
               key: PRIMARY
           key_len: 4
               ref: NULL
              rows: 7
             Extra: Using where

You should take note of the following restrictions and limitations on
*Note `EXPLAIN PARTITIONS': explain.:

   * You cannot use the `PARTITIONS' and `EXTENDED' keywords together
     in the same *Note `EXPLAIN ... SELECT': explain. statement.
     Attempting to do so produces a syntax error.

   * If *Note `EXPLAIN PARTITIONS': explain. is used to examine a query
     against a nonpartitioned table, no error is produced, but the
     value of the `partitions' column is always `NULL'.

The `rows' column of *Note `EXPLAIN PARTITIONS': explain. output
displays the total number of rows in the table.

See also *Note explain::.


File: manual.info,  Node: partitioning-pruning,  Next: partitioning-limitations,  Prev: partitioning-management,  Up: partitioning

18.4 Partition Pruning
======================

This section discusses an optimization known as _partition pruning_.
The core concept behind partition pruning is relatively simple, and can
be described as `Do not scan partitions where there can be no matching
values'. Suppose that you have a partitioned table `t1' defined by this
statement:

     CREATE TABLE t1 (
         fname VARCHAR(50) NOT NULL,
         lname VARCHAR(50) NOT NULL,
         region_code TINYINT UNSIGNED NOT NULL,
         dob DATE NOT NULL
     )
     PARTITION BY RANGE( region_code ) (
         PARTITION p0 VALUES LESS THAN (64),
         PARTITION p1 VALUES LESS THAN (128),
         PARTITION p2 VALUES LESS THAN (192),
         PARTITION p3 VALUES LESS THAN MAXVALUE
     );

Consider the case where you wish to obtain results from a *Note
`SELECT': select. statement such as this one:

     SELECT fname, lname, region_code, dob
         FROM t1
         WHERE region_code > 125 AND region_code < 130;

It is easy to see that none of the rows which ought to be returned will
be in either of the partitions `p0' or `p3'; that is, we need to search
only in partitions `p1' and `p2' to find matching rows. By doing so, it
is possible to expend much less time and effort in finding matching
rows than would be required to scan all partitions in the table. This
`cutting away' of unneeded partitions is known as _pruning_.  When the
optimizer can make use of partition pruning in performing this query,
execution of the query can be an order of magnitude faster than the
same query against a nonpartitioned table containing the same column
definitions and data.

The optimizer can perform pruning whenever a `WHERE' condition can be
reduced to either one of the following two cases:

   * `PARTITION_COLUMN = CONSTANT'

   * `PARTITION_COLUMN IN (CONSTANT1, CONSTANT2, ..., CONSTANTN)'

In the first case, the optimizer simply evaluates the partitioning
expression for the value given, determines which partition contains
that value, and scans only this partition. In many cases, the equal
sign can be replaced with another arithmetic comparison, including `<',
`>', `<=', `>=', and `<>'. Some queries using `BETWEEN' in the `WHERE'
clause can also take advantage of partition pruning. See the examples
later in this section.

In the second case, the optimizer evaluates the partitioning expression
for each value in the list, creates a list of matching partitions, and
then scans only the partitions in this partition list.

MySQL 5.5 and later can apply partition pruning to *Note `SELECT':
select, *Note `DELETE': delete, and *Note `UPDATE': update. statements.
*Note `INSERT': insert. statements currently cannot be pruned.

Pruning can also be applied to short ranges, which the optimizer can
convert into equivalent lists of values. For instance, in the previous
example, the `WHERE' clause can be converted to `WHERE region_code IN
(126, 127, 128, 129)'. Then the optimizer can determine that the first
three values in the list are found in partition `p1', the remaining
three values in partition `p2', and that the other partitions contain no
relevant values and so do not need to be searched for matching rows.

Beginning with MySQL 5.5.0, the optimizer can also perform pruning for
`WHERE' conditions that involve comparisons of the preceding types on
multiple columns for tables that use `RANGE COLUMNS' or `LIST COLUMNS'
partitioning.

This type of optimization can be applied whenever the partitioning
expression consists of an equality or a range which can be reduced to a
set of equalities, or when the partitioning expression represents an
increasing or decreasing relationship. Pruning can also be applied for
tables partitioned on a *Note `DATE': datetime. or *Note `DATETIME':
datetime. column when the partitioning expression uses the `YEAR()' or
`TO_DAYS()' function. In addition, in MySQL 5.5, pruning can be applied
for such tables when the partitioning expression uses the
`TO_SECONDS()' function.

Suppose that table `t2', defined as shown here, is partitioned on a
*Note `DATE': datetime. column:

     CREATE TABLE t2 (
         fname VARCHAR(50) NOT NULL,
         lname VARCHAR(50) NOT NULL,
         region_code TINYINT UNSIGNED NOT NULL,
         dob DATE NOT NULL
     )
     PARTITION BY RANGE( YEAR(dob) ) (
         PARTITION d0 VALUES LESS THAN (1970),
         PARTITION d1 VALUES LESS THAN (1975),
         PARTITION d2 VALUES LESS THAN (1980),
         PARTITION d3 VALUES LESS THAN (1985),
         PARTITION d4 VALUES LESS THAN (1990),
         PARTITION d5 VALUES LESS THAN (2000),
         PARTITION d6 VALUES LESS THAN (2005),
         PARTITION d7 VALUES LESS THAN MAXVALUE
     );

The following statements using `t2' can make of use partition pruning:

     SELECT * FROM t2 WHERE dob = '1982-06-23';

     UPDATE t2 SET region_code = 8 WHERE dob BETWEEN '1991-02-15' AND '1997-04-25';

     DELETE FROM t2 WHERE dob >= '1984-06-21' AND dob <= '1999-06-21'

In the case of the last statement, the optimizer can also act as
follows:

  1. _Find the partition containing the low end of the range_.

     `YEAR('1984-06-21')' yields the value `1984', which is found in
     partition `d3'.

  2. _Find the partition containing the high end of the range_.

     `YEAR('1999-06-21')' evaluates to `1999', which is found in
     partition `d5'.

  3. _Scan only these two partitions and any partitions that may lie
     between them_.

     In this case, this means that only partitions `d3', `d4', and `d5'
     are scanned. The remaining partitions may be safely ignored (and
     are ignored).

*Important*:

Invalid `DATE' and `DATETIME' values referenced in the `WHERE'
condition of a statement against a partitioned table are treated as
`NULL'. This means that a query such as `SELECT * FROM
PARTITIONED_TABLE WHERE DATE_COLUMN < '2008-12-00'' does not return any
values (see Bug #40972).

So far, we have looked only at examples using `RANGE' partitioning, but
pruning can be applied with other partitioning types as well.

Consider a table that is partitioned by `LIST', where the partitioning
expression is increasing or decreasing, such as the table `t3' shown
here. (In this example, we assume for the sake of brevity that the
`region_code' column is limited to values between 1 and 10 inclusive.)

     CREATE TABLE t3 (
         fname VARCHAR(50) NOT NULL,
         lname VARCHAR(50) NOT NULL,
         region_code TINYINT UNSIGNED NOT NULL,
         dob DATE NOT NULL
     )
     PARTITION BY LIST(region_code) (
         PARTITION r0 VALUES IN (1, 3),
         PARTITION r1 VALUES IN (2, 5, 8),
         PARTITION r2 VALUES IN (4, 9),
         PARTITION r3 VALUES IN (6, 7, 10)
     );

For a statement such as `SELECT * FROM t3 WHERE region_code BETWEEN 1
AND 3', the optimizer determines in which partitions the values 1, 2,
and 3 are found (`r0' and `r1') and skips the remaining ones (`r2' and
`r3').

For tables that are partitioned by `HASH' or `KEY', partition pruning
is also possible in cases in which the `WHERE' clause uses a simple `='
relation against a column used in the partitioning expression. Consider
a table created like this:

     CREATE TABLE t4 (
         fname VARCHAR(50) NOT NULL,
         lname VARCHAR(50) NOT NULL,
         region_code TINYINT UNSIGNED NOT NULL,
         dob DATE NOT NULL
     )
     PARTITION BY KEY(region_code)
     PARTITIONS 8;

A statement that compares a column value with a constant can be pruned:

     UPDATE t4 WHERE region_code = 7;

Pruning can also be employed for short ranges, because the optimizer
can turn such conditions into `IN' relations. For example, using the
same table `t4' as defined previously, queries such as these can be
pruned:

     SELECT * FROM t4 WHERE region_code > 2 AND region_code < 6;

     SELECT * FROM t4 WHERE region_code BETWEEN 3 AND 5;

In both these cases, the `WHERE' clause is transformed by the optimizer
into `WHERE region_code IN (3, 4, 5)'.

*Important*:

This optimization is used only if the range size is smaller than the
number of partitions. Consider this statement:

     DELETE FROM t4 WHERE region_code BETWEEN 4 AND 12;

The range in the `WHERE' clause covers 9 values (4, 5, 6, 7, 8, 9, 10,
11, 12), but `t4' has only 8 partitions. This means that the `DELETE'
cannot be pruned.

When a table is partitioned by `HASH' or `KEY', pruning can be used
only on integer columns. For example, this statement cannot use pruning
because `dob' is a *Note `DATE': datetime.  column:

     SELECT * FROM t4 WHERE dob >= '2001-04-14' AND dob <= '2005-10-15';

However, if the table stores year values in an *Note `INT':
integer-types. column, then a query having `WHERE year_col >= 2001 AND
year_col <= 2005' can be pruned.

*Note*:

In MySQL 5.1, a query against a table partitioned by `KEY' and having a
composite partitioning key could be pruned only if the query's `WHERE'
clause compared every column in the key to a constant. In MySQL 5.5, it
is possible to prune queries against such tables even if the `WHERE'
clause does not reference every column in the partitioning key.


File: manual.info,  Node: partitioning-limitations,  Prev: partitioning-pruning,  Up: partitioning

18.5 Restrictions and Limitations on Partitioning
=================================================

* Menu:

* partitioning-limitations-partitioning-keys-unique-keys::  Partitioning Keys, Primary Keys, and Unique Keys
* partitioning-limitations-storage-engines::  Partitioning Limitations Relating to Storage Engines
* partitioning-limitations-functions::  Partitioning Limitations Relating to Functions
* partitioning-limitations-locking::  Partitioning and Table-Level Locking

This section discusses current restrictions and limitations on MySQL
partitioning support.

Prohibited constructs

The following constructs are not permitted in partitioning expressions:

   * Stored procedures, stored functions, UDFs, or plugins.

   * Declared variables or user variables.

For a list of SQL functions which are permitted in partitioning
expressions, see *Note partitioning-limitations-functions::.

Arithmetic and logical operators

Use of the arithmetic operators `+', `-', and `*' is permitted in
partitioning expressions. However, the result must be an integer value
or `NULL' (except in the case of `[LINEAR] KEY' partitioning, as
discussed elsewhere in this chapter; see *Note partitioning-types::,
for more information).

The `DIV' operator is also supported, and the `/' operator is not
permitted. (Bug #30188, Bug #33182)

The bit operators `|', `&', `^', `<<', `>>', and `~' are not permitted
in partitioning expressions.

`HANDLER' statements

In MySQL 5.5, the *Note `HANDLER': handler. statement is not supported
with partitioned tables.

Server SQL mode

Tables employing user-defined partitioning do not preserve the SQL mode
in effect at the time that they were created. As discussed in *Note
server-sql-mode::, the results of many MySQL functions and operators
may change according to the server SQL mode. Therefore, a change in the
SQL mode at any time after the creation of partitioned tables may lead
to major changes in the behavior of such tables, and could easily lead
to corruption or loss of data. For these reasons, _it is strongly
recommended that you never change the server SQL mode after creating
partitioned tables_.

Examples

The following examples illustrate some changes in behavior of
partitioned tables due to a change in the server SQL mode:

  1. Error handling

     Suppose that you create a partitioned table whose partitioning
     expression is one such as `COLUMN DIV 0' or `COLUMN MOD 0', as
     shown here:

          mysql> CREATE TABLE tn (c1 INT)
              ->     PARTITION BY LIST(1 DIV c1) (
              ->       PARTITION p0 VALUES IN (NULL),
              ->       PARTITION p1 VALUES IN (1)
              -> );
          Query OK, 0 rows affected (0.05 sec)

     The default behavior for MySQL is to return `NULL' for the result
     of a division by zero, without producing any errors:

          mysql> SELECT @@sql_mode;
          +------------+
          | @@sql_mode |
          +------------+
          |            |
          +------------+
          1 row in set (0.00 sec)

          mysql> INSERT INTO tn VALUES (NULL), (0), (1);
          Query OK, 3 rows affected (0.00 sec)
          Records: 3  Duplicates: 0  Warnings: 0

     However, changing the server SQL mode to treat division by zero as
     an error and to enforce strict error handling causes the same
     *Note `INSERT': insert. statement to fail, as shown here:

          mysql> SET sql_mode='STRICT_ALL_TABLES,ERROR_FOR_DIVISION_BY_ZERO';
          Query OK, 0 rows affected (0.00 sec)

          mysql> INSERT INTO tn VALUES (NULL), (0), (1);
          `ERROR 1365 (22012): Division by 0'

  2. Table accessibility

     Sometimes a change in the server SQL mode can make partitioned
     tables unusable. The following *Note `CREATE TABLE': create-table.
     statement can be executed successfully only if the
     `NO_UNSIGNED_SUBTRACTION' mode is in effect:

          mysql> SELECT @@sql_mode;
          +------------+
          | @@sql_mode |
          +------------+
          |            |
          +------------+
          1 row in set (0.00 sec)

          mysql> CREATE TABLE tu (c1 BIGINT UNSIGNED)
              ->   PARTITION BY RANGE(c1 - 10) (
              ->     PARTITION p0 VALUES LESS THAN (-5),
              ->     PARTITION p1 VALUES LESS THAN (0),
              ->     PARTITION p2 VALUES LESS THAN (5),
              ->     PARTITION p3 VALUES LESS THAN (10),
              ->     PARTITION p4 VALUES LESS THAN (MAXVALUE)
              -> );
          `ERROR 1563 (HY000): Partition constant is out of partition function domain'

          mysql> SET sql_mode='NO_UNSIGNED_SUBTRACTION';
          Query OK, 0 rows affected (0.00 sec)

          mysql> SELECT @@sql_mode;
          +-------------------------+
          | @@sql_mode              |
          +-------------------------+
          | NO_UNSIGNED_SUBTRACTION |
          +-------------------------+
          1 row in set (0.00 sec)

          mysql> CREATE TABLE tu (c1 BIGINT UNSIGNED)
              ->   PARTITION BY RANGE(c1 - 10) (
              ->     PARTITION p0 VALUES LESS THAN (-5),
              ->     PARTITION p1 VALUES LESS THAN (0),
              ->     PARTITION p2 VALUES LESS THAN (5),
              ->     PARTITION p3 VALUES LESS THAN (10),
              ->     PARTITION p4 VALUES LESS THAN (MAXVALUE)
              -> );
          Query OK, 0 rows affected (0.05 sec)

     If you remove the `NO_UNSIGNED_SUBTRACTION' server SQL mode after
     creating `tu', you may no longer be able to access this table:

          mysql> SET sql_mode='';
          Query OK, 0 rows affected (0.00 sec)

          mysql> SELECT * FROM tu;
          `ERROR 1563 (HY000): Partition constant is out of partition function domain'
          mysql> INSERT INTO tu VALUES (20);
          `ERROR 1563 (HY000): Partition constant is out of partition function domain'

Server SQL modes also impact replication of partitioned tables.
Differing SQL modes on master and slave can lead to partitioning
expressions being evaluated differently; this can cause the
distribution of data among partitions to be different in the master's
and slave's copies of a given table, and may even cause inserts into
partitioned tables that succeed on the master to fail on the slave. For
best results, you should always use the same server SQL mode on the
master and on the slave.

Performance considerations

Some affects of partitioning operations on performance are given in the
following list:

   * File system operations

     Partitioning and repartitioning operations (such as *Note `ALTER
     TABLE': alter-table-partition-operations. with `PARTITION BY ...',
     `REORGANIZE PARTITIONS', or `REMOVE PARTITIONING') depend on file
     system operations for their implementation. This means that the
     speed of these operations is affected by such factors as file
     system type and characteristics, disk speed, swap space, file
     handling efficiency of the operating system, and MySQL server
     options and variables that relate to file handling. In particular,
     you should make sure that `large_files_support' is enabled and that
     `open_files_limit' is set properly. For partitioned tables using
     the `MyISAM' storage engine, increasing `myisam_max_sort_file_size'
     may improve performance; partitioning and repartitioning
     operations involving `InnoDB' tables may be made more efficient by
     enabling `innodb_file_per_table'.

     See also *Note partitioning-limitations-max-partitions::.

   * Table locks

     The process executing a partitioning operation on a table takes a
     write lock on the table. Reads from such tables are relatively
     unaffected; pending *Note `INSERT': insert. and *Note `UPDATE':
     update. operations are performed as soon as the partitioning
     operation has completed.

   * Storage engine

     Partitioning operations, queries, and update operations generally
     tend to be faster with `MyISAM' tables than with `InnoDB' or *Note
     `NDB': mysql-cluster. tables.

   * Use of indexes and partition pruning

     As with nonpartitioned tables, proper use of indexes can speed up
     queries on partitioned tables significantly. In addition,
     designing partitioned tables and statements using these tables to
     take advantage of _partition pruning_ can improve performance
     dramatically.  See *Note partitioning-pruning::, for more
     information.

   * Performance with `LOAD DATA'

     In MySQL 5.5, *Note `LOAD DATA': load-data. uses buffering to
     improve performance. You should be aware that the buffer uses 130
     KB memory per partition to achieve this.

Maximum number of partitions

The maximum possible number of partitions for a given table (that does
not use the *Note `NDB': mysql-cluster. storage engine) is 1024. This
number includes subpartitions.

The maximum possible number of user-defined partitions for a table
using the *Note `NDBCLUSTER': mysql-cluster. storage engine is
determined according to the version of the MySQL Cluster software being
used, the number of data nodes, and other factors.  See *Note
mysql-cluster-nodes-groups-user-partitioning::, for more information.

If, when creating tables with a large number of partitions (but less
than the maximum), you encounter an error message such as `Got error
... from storage engine: Out of resources when opening file', you may
be able to address the issue by increasing the value of the
`open_files_limit' system variable.  However, this is dependent on the
operating system, and may not be possible or advisable on all
platforms; see *Note not-enough-file-handles::, for more information.
In some cases, using large numbers (hundreds) of partitions may also
not be advisable due to other concerns, so using more partitions does
not automatically lead to better results.

See also *Note partitioning-limitations-file-system-ops::.

Query cache not supported

The query cache is not supported for partitioned tables.  Beginning
with MySQL 5.5.23, the query cache is automatically disabled for
queries involving partitioned tables, and cannot be enabled for such
queries. (Bug #53775)

Per-partition key caches

In MySQL 5.5, key caches are supported for partitioned *Note `MyISAM':
myisam-storage-engine. tables, using the *Note `CACHE INDEX':
cache-index. and *Note `LOAD INDEX INTO CACHE': load-index. statements.
Key caches may be defined for one, several, or all partitions, and
indexes for one, several, or all partitions may be preloaded into key
caches.

Foreign keys not supported for partitioned `InnoDB' tables

Partitioned tables using the *Note `InnoDB': innodb-storage-engine.
storage engine do not support foreign keys. More specifically, this
means that the following two statements are true:

  1. No definition of an `InnoDB' table employing user-defined
     partitioning may contain foreign key references; no `InnoDB' table
     whose definition contains foreign key references may be
     partitioned.

  2. No `InnoDB' table definition may contain a foreign key reference
     to a user-partitioned table; no `InnoDB' table with user-defined
     partitioning may contain columns referenced by foreign keys.

The scope of the restrictions just listed includes all tables that use
the `InnoDB' storage engine.  *Note `CREATE TABLE':
create-table-foreign-keys. and *Note `ALTER TABLE': alter-table.
statements that would result in tables violating these restrictions are
not allowed.

`ALTER TABLE ... ORDER BY'

An `ALTER TABLE ... ORDER BY COLUMN' statement run against a
partitioned table causes ordering of rows only within each partition.

`FULLTEXT' indexes

Partitioned tables do not support `FULLTEXT' indexes or searches. This
includes partitioned tables employing the *Note `MyISAM':
myisam-storage-engine. storage engine.

Spatial columns

Columns with spatial data types such as `POINT' or `GEOMETRY' cannot be
used in partitioned tables.

Temporary tables

Temporary tables cannot be partitioned. (Bug #17497)

Log tables

It is not possible to partition the log tables; an *Note `ALTER TABLE
... PARTITION BY ...': alter-table-partition-operations. statement on
such a table fails with an error.

Data type of partitioning key

A partitioning key must be either an integer column or an expression
that resolves to an integer. The column or expression value may also be
`NULL'. (See *Note partitioning-handling-nulls::.)

There are two exceptions to this restriction:

  1. When partitioning by [`LINEAR'] `KEY', it is possible to use
     columns of other types as partitioning keys, because MySQL's
     internal key-hashing functions produce the correct data type from
     these types. For example, the following *Note `CREATE TABLE':
     create-table. statement is valid:

          CREATE TABLE tkc (c1 CHAR)
          PARTITION BY KEY(c1)
          PARTITIONS 4;

  2. When partitioning by `RANGE COLUMNS' or `LIST COLUMNS', it is
     possible to use string, *Note `DATE': datetime, and *Note
     `DATETIME': datetime. columns. For example, each of the following
     *Note `CREATE TABLE': create-table. statements is valid:

          CREATE TABLE rc (c1 INT, c2 DATE)
          PARTITION BY RANGE COLUMNS(c2) (
              PARTITION p0 VALUES LESS THAN('1990-01-01'),
              PARTITION p1 VALUES LESS THAN('1995-01-01'),
              PARTITION p2 VALUES LESS THAN('2000-01-01'),
              PARTITION p3 VALUES LESS THAN('2005-01-01'),
              PARTITION p4 VALUES LESS THAN(MAXVALUE)
          );

          CREATE TABLE lc (c1 INT, c2 CHAR(1))
          PARTITION BY LIST COLUMNS(c2) (
              PARTITION p0 VALUES IN('a', 'd', 'g', 'j', 'm', 'p', 's', 'v', 'y'),
              PARTITION p1 VALUES IN('b', 'e', 'h', 'k', 'n', 'q', 't', 'w', 'z'),
              PARTITION p2 VALUES IN('c', 'f', 'i', 'l', 'o', 'r', 'u', 'x', NULL)
          );

Neither of the preceding exceptions applies to *Note `BLOB': blob. or
*Note `TEXT': blob. column types.

Subqueries

A partitioning key may not be a subquery, even if that subquery
resolves to an integer value or `NULL'.

Issues with subpartitions

Subpartitions must use `HASH' or `KEY' partitioning. Only `RANGE' and
`LIST' partitions may be subpartitioned; `HASH' and `KEY' partitions
cannot be subpartitioned.

Currently, `SUBPARTITION BY KEY' requires that the subpartitioning
column or columns be specified explicitly, unlike the case with
`PARTITION BY KEY', where it can be omitted (in which case the table's
primary key column is used by default). Consider the table created by
this statement:

     CREATE TABLE ts (
         id INT NOT NULL AUTO_INCREMENT PRIMARY KEY,
         name VARCHAR(30)
     );

You can create a table having the same columns, partitioned by `KEY',
using a statement such as this one:

     CREATE TABLE ts (
         id INT NOT NULL AUTO_INCREMENT PRIMARY KEY,
         name VARCHAR(30)
     )
     PARTITION BY KEY()
     PARTITIONS 4;

The previous statement is treated as though it had been written like
this, with the table's primary key column used as the partitioning
column:

     CREATE TABLE ts (
         id INT NOT NULL AUTO_INCREMENT PRIMARY KEY,
         name VARCHAR(30)
     )
     PARTITION BY KEY(id)
     PARTITIONS 4;

However, the following statement that attempts to create a
subpartitioned table using the default column as the subpartitioning
column fails, and the column must be specified for the statement to
succeed, as shown here:

     mysql> CREATE TABLE ts (
         ->     id INT NOT NULL AUTO_INCREMENT PRIMARY KEY,
         ->     name VARCHAR(30)
         -> )
         -> PARTITION BY RANGE(id)
         -> SUBPARTITION BY KEY()
         -> SUBPARTITIONS 4
         -> (
         ->     PARTITION p0 VALUES LESS THAN (100),
         ->     PARTITION p1 VALUES LESS THAN (MAXVALUE)
         -> );
     `ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that
     corresponds to your MySQL server version for the right syntax to use near ')'

     mysql> CREATE TABLE ts (
         ->     id INT NOT NULL AUTO_INCREMENT PRIMARY KEY,
         ->     name VARCHAR(30)
         -> )
         -> PARTITION BY RANGE(id)
         -> SUBPARTITION BY KEY(id)
         -> SUBPARTITIONS 4
         -> (
         ->     PARTITION p0 VALUES LESS THAN (100),
         ->     PARTITION p1 VALUES LESS THAN (MAXVALUE)
         -> );
     Query OK, 0 rows affected (0.07 sec)

This is a known issue (see Bug #51470).

`DELAYED' option not supported

Use of *Note `INSERT DELAYED': insert-delayed. to insert rows into a
partitioned table is not supported. Attempting to do so fails with an
error.

`DATA DIRECTORY' and `INDEX DIRECTORY' options

`DATA DIRECTORY' and `INDEX DIRECTORY' are subject to the following
restrictions when used with partitioned tables:

   * Table-level `DATA DIRECTORY' and `INDEX DIRECTORY' options are
     ignored (see Bug #32091).

   * On Windows, the `DATA DIRECTORY' and `INDEX DIRECTORY' options are
     not supported for individual partitions or subpartitions (Bug
     #30459).

Repairing and rebuilding partitioned tables

The statements *Note `CHECK TABLE': check-table, *Note `OPTIMIZE
TABLE': optimize-table, *Note `ANALYZE TABLE': analyze-table, and *Note
`REPAIR TABLE': repair-table. are supported for partitioned tables.

In addition, you can use `ALTER TABLE ... REBUILD PARTITION' to rebuild
one or more partitions of a partitioned table; `ALTER TABLE ...
REORGANIZE PARTITION' also causes partitions to be rebuilt. See *Note
alter-table::, for more information about these two statements.

*Note `mysqlcheck': mysqlcheck. and *Note `myisamchk': myisamchk. are
not supported with partitioned tables.


File: manual.info,  Node: partitioning-limitations-partitioning-keys-unique-keys,  Next: partitioning-limitations-storage-engines,  Prev: partitioning-limitations,  Up: partitioning-limitations

18.5.1 Partitioning Keys, Primary Keys, and Unique Keys
-------------------------------------------------------

This section discusses the relationship of partitioning keys with
primary keys and unique keys. The rule governing this relationship can
be expressed as follows: All columns used in the partitioning
expression for a partitioned table must be part of every unique key
that the table may have.

In other words, _every unique key on the table must use every column in
the table's partitioning expression_.  (This also includes the table's
primary key, since it is by definition a unique key. This particular
case is discussed later in this section.) For example, each of the
following table creation statements is invalid:

     CREATE TABLE t1 (
         col1 INT NOT NULL,
         col2 DATE NOT NULL,
         col3 INT NOT NULL,
         col4 INT NOT NULL,
         UNIQUE KEY (col1, col2)
     )
     PARTITION BY HASH(col3)
     PARTITIONS 4;

     CREATE TABLE t2 (
         col1 INT NOT NULL,
         col2 DATE NOT NULL,
         col3 INT NOT NULL,
         col4 INT NOT NULL,
         UNIQUE KEY (col1),
         UNIQUE KEY (col3)
     )
     PARTITION BY HASH(col1 + col3)
     PARTITIONS 4;

In each case, the proposed table would have at least one unique key
that does not include all columns used in the partitioning expression.

Each of the following statements is valid, and represents one way in
which the corresponding invalid table creation statement could be made
to work:

     CREATE TABLE t1 (
         col1 INT NOT NULL,
         col2 DATE NOT NULL,
         col3 INT NOT NULL,
         col4 INT NOT NULL,
         UNIQUE KEY (col1, col2, col3)
     )
     PARTITION BY HASH(col3)
     PARTITIONS 4;

     CREATE TABLE t2 (
         col1 INT NOT NULL,
         col2 DATE NOT NULL,
         col3 INT NOT NULL,
         col4 INT NOT NULL,
         UNIQUE KEY (col1, col3)
     )
     PARTITION BY HASH(col1 + col3)
     PARTITIONS 4;

This example shows the error produced in such cases:

     mysql> CREATE TABLE t3 (
         ->     col1 INT NOT NULL,
         ->     col2 DATE NOT NULL,
         ->     col3 INT NOT NULL,
         ->     col4 INT NOT NULL,
         ->     UNIQUE KEY (col1, col2),
         ->     UNIQUE KEY (col3)
         -> )
         -> PARTITION BY HASH(col1 + col3)
         -> PARTITIONS 4;
     `ERROR 1491 (HY000): A PRIMARY KEY must include all columns in the table's partitioning function'

The *Note `CREATE TABLE': create-table. statement fails because both
`col1' and `col3' are included in the proposed partitioning key, but
neither of these columns is part of both of unique keys on the table.
This shows one possible fix for the invalid table definition:

     mysql> CREATE TABLE t3 (
         ->     col1 INT NOT NULL,
         ->     col2 DATE NOT NULL,
         ->     col3 INT NOT NULL,
         ->     col4 INT NOT NULL,
         ->     UNIQUE KEY (col1, col2, col3),
         ->     UNIQUE KEY (col3)
         -> )
         -> PARTITION BY HASH(col3)
         -> PARTITIONS 4;
     Query OK, 0 rows affected (0.05 sec)

In this case, the proposed partitioning key `col3' is part of both
unique keys, and the table creation statement succeeds.

The following table cannot be partitioned at all, because there is no
way to include in a partitioning key any columns that belong to both
unique keys:

     CREATE TABLE t4 (
         col1 INT NOT NULL,
         col2 INT NOT NULL,
         col3 INT NOT NULL,
         col4 INT NOT NULL,
         UNIQUE KEY (col1, col3),
         UNIQUE KEY (col2, col4)
     );

Since every primary key is by definition a unique key, this restriction
also includes the table's primary key, if it has one. For example, the
next two statements are invalid:

     CREATE TABLE t5 (
         col1 INT NOT NULL,
         col2 DATE NOT NULL,
         col3 INT NOT NULL,
         col4 INT NOT NULL,
         PRIMARY KEY(col1, col2)
     )
     PARTITION BY HASH(col3)
     PARTITIONS 4;

     CREATE TABLE t6 (
         col1 INT NOT NULL,
         col2 DATE NOT NULL,
         col3 INT NOT NULL,
         col4 INT NOT NULL,
         PRIMARY KEY(col1, col3),
         UNIQUE KEY(col2)
     )
     PARTITION BY HASH( YEAR(col2) )
     PARTITIONS 4;

In both cases, the primary key does not include all columns referenced
in the partitioning expression. However, both of the next two
statements are valid:

     CREATE TABLE t7 (
         col1 INT NOT NULL,
         col2 DATE NOT NULL,
         col3 INT NOT NULL,
         col4 INT NOT NULL,
         PRIMARY KEY(col1, col2)
     )
     PARTITION BY HASH(col1 + YEAR(col2))
     PARTITIONS 4;

     CREATE TABLE t8 (
         col1 INT NOT NULL,
         col2 DATE NOT NULL,
         col3 INT NOT NULL,
         col4 INT NOT NULL,
         PRIMARY KEY(col1, col2, col4),
         UNIQUE KEY(col2, col1)
     )
     PARTITION BY HASH(col1 + YEAR(col2))
     PARTITIONS 4;

If a table has no unique keys--this includes having no primary
key--then this restriction does not apply, and you may use any column
or columns in the partitioning expression as long as the column type is
compatible with the partitioning type.

For the same reason, you cannot later add a unique key to a partitioned
table unless the key includes all columns used by the table's
partitioning expression. Consider the partitioned table created as
shown here:

     mysql> CREATE TABLE t_no_pk (c1 INT, c2 INT)
         ->     PARTITION BY RANGE(c1) (
         ->         PARTITION p0 VALUES LESS THAN (10),
         ->         PARTITION p1 VALUES LESS THAN (20),
         ->         PARTITION p2 VALUES LESS THAN (30),
         ->         PARTITION p3 VALUES LESS THAN (40)
         ->     );
     Query OK, 0 rows affected (0.12 sec)

It is possible to add a primary key to `t_no_pk' using either of these
*Note `ALTER TABLE': alter-table-partition-operations. statements:

     #  possible PK
     mysql> ALTER TABLE t_no_pk ADD PRIMARY KEY(c1);
     Query OK, 0 rows affected (0.13 sec)
     Records: 0  Duplicates: 0  Warnings: 0

     # drop this PK
     mysql> ALTER TABLE t_no_pk DROP PRIMARY KEY;
     Query OK, 0 rows affected (0.10 sec)
     Records: 0  Duplicates: 0  Warnings: 0

     #  use another possible PK
     mysql> ALTER TABLE t_no_pk ADD PRIMARY KEY(c1, c2);
     Query OK, 0 rows affected (0.12 sec)
     Records: 0  Duplicates: 0  Warnings: 0

     # drop this PK
     mysql> ALTER TABLE t_no_pk DROP PRIMARY KEY;
     Query OK, 0 rows affected (0.09 sec)
     Records: 0  Duplicates: 0  Warnings: 0

However, the next statement fails, because `c1' is part of the
partitioning key, but is not part of the proposed primary key:

     #  fails with error 1503
     mysql> ALTER TABLE t_no_pk ADD PRIMARY KEY(c2);
     `ERROR 1503 (HY000): A PRIMARY KEY must include all columns in the table's partitioning function'

Since `t_no_pk' has only `c1' in its partitioning expression,
attempting to adding a unique key on `c2' alone fails. However, you can
add a unique key that uses both `c1' and `c2'.

These rules also apply to existing nonpartitioned tables that you wish
to partition using *Note `ALTER TABLE ... PARTITION BY':
alter-table-partition-operations. Consider a table `np_pk' created as
shown here:

     mysql> CREATE TABLE np_pk (
         ->     id INT NOT NULL AUTO_INCREMENT,
         ->     name VARCHAR(50),
         ->     added DATE,
         ->     PRIMARY KEY (id)
         -> );
     Query OK, 0 rows affected (0.08 sec)

The following *Note `ALTER TABLE': alter-table-partition-operations.
statement fails with an error, because the `added' column is not part
of any unique key in the table:

     mysql> ALTER TABLE np_pk
         ->     PARTITION BY HASH( TO_DAYS(added) )
         ->     PARTITIONS 4;
     `ERROR 1503 (HY000): A PRIMARY KEY must include all columns in the table's partitioning function'

However, this statement using the `id' column for the partitioning
column is valid, as shown here:

     mysql> ALTER TABLE np_pk
         ->     PARTITION BY HASH(id)
         ->     PARTITIONS 4;
     Query OK, 0 rows affected (0.11 sec)
     Records: 0  Duplicates: 0  Warnings: 0

In the case of `np_pk', the only column that may be used as part of a
partitioning expression is `id'; if you wish to partition this table
using any other column or columns in the partitioning expression, you
must first modify the table, either by adding the desired column or
columns to the primary key, or by dropping the primary key altogether.


File: manual.info,  Node: partitioning-limitations-storage-engines,  Next: partitioning-limitations-functions,  Prev: partitioning-limitations-partitioning-keys-unique-keys,  Up: partitioning-limitations

18.5.2 Partitioning Limitations Relating to Storage Engines
-----------------------------------------------------------

The following limitations apply to the use of storage engines with
user-defined partitioning of tables.

`MERGE' storage engine

User-defined partitioning and the `MERGE' storage engine are not
compatible. Tables using the `MERGE' storage engine cannot be
partitioned.  Partitioned tables cannot be merged.

`FEDERATED' storage engine

Partitioning of `FEDERATED' tables is not supported; it is not possible
to create partitioned `FEDERATED' tables.

`CSV' storage engine

Partitioned tables using the `CSV' storage engine are not supported; it
is not possible to create partitioned `CSV' tables.

`InnoDB' storage engine

*Note `InnoDB': innodb-storage-engine. foreign keys and MySQL
partitioning are not compatible. Partitioned `InnoDB' tables cannot
have foreign key references, nor can they have columns referenced by
foreign keys. `InnoDB' tables which have or which are referenced by
foreign keys cannot be partitioned.

In addition, *Note `ALTER TABLE ... OPTIMIZE PARTITION':
alter-table-partition-operations. does not work correctly with
partitioned tables that use the `InnoDB' storage engine. Use `ALTER
TABLE ... REBUILD PARTITION' and `ALTER TABLE ... ANALYZE PARTITION',
instead, for such tables. For more information, see *Note
alter-table-partition-operations::.

`NDB' storage engine (MySQL Cluster)

Partitioning by `KEY' (including `LINEAR KEY') is the only type of
partitioning supported for the *Note `NDB': mysql-cluster. storage
engine. It is not possible in MySQL Cluster NDB 7.3 to create a MySQL
Cluster table using any partitioning type other than [`LINEAR'] `KEY',
and attempting to do so fails with an error.

In addition, the maximum number of partitions that can be defined for
an *Note `NDB': mysql-cluster. table depends on the number of data
nodes and node groups in the cluster, the version of the MySQL Cluster
software in use, and other factors.  See *Note
mysql-cluster-nodes-groups-user-partitioning::, for more information.

*Note `CREATE TABLE': create-table. and *Note `ALTER TABLE':
alter-table-partition-operations. statements that would cause a
user-partitioned *Note `NDB': mysql-cluster. table not to meet either or
both of the following two requirements are not permitted, and fail with
an error:

  1. The table must have an explicit primary key.

  2. All columns listed in the table's partitioning expression must be
     part of the primary key.

Exception

If a user-partitioned *Note `NDB': mysql-cluster. table is created
using an empty column-list (that is, using `PARTITION BY KEY()' or
`PARTITION BY LINEAR KEY()'), then no explicit primary key is required.

Upgrading partitioned tables

When performing an upgrade, tables which are partitioned by `KEY' and
which use any storage engine other than *Note `NDB': mysql-cluster.
must be dumped and reloaded.

Same storage engine for all partitions

All partitions of a partitioned table must use the same storage engine
and it must be the same storage engine used by the table as a whole. In
addition, if one does not specify an engine on the table level, then
one must do either of the following when creating or altering a
partitioned table:

   * Do _not_ specify any engine for _any_ partition or subpartition

   * Specify the engine for _all_ partitions or subpartitions


File: manual.info,  Node: partitioning-limitations-functions,  Next: partitioning-limitations-locking,  Prev: partitioning-limitations-storage-engines,  Up: partitioning-limitations

18.5.3 Partitioning Limitations Relating to Functions
-----------------------------------------------------

This section discusses limitations in MySQL Partitioning relating
specifically to functions used in partitioning expressions.

Only the MySQL functions shown in the following table are supported in
partitioning expressions.

This table lists the functions that are supported in partitioning
expressions as of MySQL 5.1.12. Functions are presented in a three
column table format and in alphabetical order from left to right.

`ABS()'                  `CEILING()' (see *Note   `DAY()'
                         partitioning-limitations-ceiling-floor::)
`DAYOFMONTH()'           `DAYOFWEEK()'            `DAYOFYEAR()'
`DATEDIFF()'             `EXTRACT()' (see *Note   `FLOOR()' (see *Note
                         partitioning-limitations-extract::)partitioning-limitations-ceiling-floor::)
`HOUR()'                 `MICROSECOND()'          `MINUTE()'
`MOD()'                  `MONTH()'                `QUARTER()'
`SECOND()'               `TIME_TO_SEC()'          `TO_DAYS()'
`TO_SECONDS()'           `UNIX_TIMESTAMP()'       `WEEKDAY()'
(implemented in MySQL    (permitted beginning     
5.5.0)                   with MySQL 5.5.1 and     
                         fully supported          
                         beginning with MySQL     
                         5.5.15, with *Note       
                         `TIMESTAMP': datetime.   
                         columns)                 
`YEAR()'                                          `YEARWEEK()'

In MySQL 5.5, partition pruning is supported for the `TO_DAYS()',
`TO_SECONDS()', and `YEAR()' functions. In addition, beginning with
MySQL 5.5.15, `UNIX_TIMESTAMP()' is treated as monotonic in
partitioning expressions. See *Note partitioning-pruning::, for more
information.

`CEILING()' and `FLOOR()'

Each of these functions returns an integer only if it is passed an
argument of an exact numeric type, such as one of the *Note `INT':
integer-types. types or *Note `DECIMAL': fixed-point-types. This means,
for example, that the following *Note `CREATE TABLE': create-table.
statement fails with an error, as shown here:

     mysql> CREATE TABLE t (c FLOAT) PARTITION BY LIST( FLOOR(c) )(
         ->     PARTITION p0 VALUES IN (1,3,5),
         ->     PARTITION p1 VALUES IN (2,4,6)
         -> );
     `ERROR 1490 (HY000): The PARTITION function returns the wrong type'

`EXTRACT()' function with `WEEK' specifier

The value returned by the `EXTRACT()' function, when used as
`EXTRACT(WEEK FROM COL)', depends on the value of the
`default_week_format' system variable. For this reason, beginning with
MySQL 5.5.9, `EXTRACT()' is longer permitted as a partitioning function
when it specifies the unit as `WEEK'. (Bug #54483)

See *Note mathematical-functions::, for more information about the
return types of these functions, as well as *Note numeric-types::.


File: manual.info,  Node: partitioning-limitations-locking,  Prev: partitioning-limitations-functions,  Up: partitioning-limitations

18.5.4 Partitioning and Table-Level Locking
-------------------------------------------

For storage engines such as *Note `MyISAM': myisam-storage-engine.
that actually execute table-level locks when executing DML or DDL
statements, such a statement affecting a partitioned table imposes a
lock on the table as a whole; that is, all partitions are locked until
the statement was finished. For example, a *Note `SELECT': select. from
a partitioned `MyISAM' table causes a lock on the entire table.

In practical terms, what this means is that the statements discussed
later in this section tend to execute more slowly as the number of
partitions increases. This limitation is greatly reduced in MySQL 5.6,
with the introduction of _partition lock pruning_ in MySQL 5.6.6.

This is not true for statements effecting partitioned tables using
storage engines such as *Note `InnoDB': innodb-storage-engine, that
employ row-level locking and do not actually perform (or need to
perform) the locks prior to partition pruning.

The next few paragraphs discuss the effects of MySQL statements on
partitioned tables using storage engines that employ table-level locks.

* DML statements *

*Note `SELECT': select. statements lock the entire table. `SELECT'
statements containing unions or joins lock all tables named in the
union or join.

*Note `UPDATE': update. also locks the entire table.

*Note `REPLACE': replace. and *Note `INSERT': insert. (including *Note
`INSERT ... ON DUPLICATE KEY UPDATE': insert-on-duplicate.) lock the
entire table.

*Note `INSERT ... SELECT': insert-select. locks both the source table
and the target table.

*Note*:

*Note `INSERT DELAYED': insert-delayed. is not supported for
partitioned tables.

A *Note `LOAD DATA': load-data.  statement on a partitioned table locks
the entire table.

A trigger on a partitioned table, once activated, locks the entire
table.

* DDL statements *

*Note `CREATE VIEW': create-view. causes a lock on any partitioned
table from which it reads.

*Note `ALTER TABLE': alter-table. locks the affected partitioned table.

* Other statements *

*Note `LOCK TABLES': lock-tables. locks all partitions of a partioned
table.

Evaluating the EXPR in a *Note `CALL stored_procedure(EXPR)': call.
statement locks all partitions of any partitioned table referenced by
EXPR.

*Note `ALTER TABLE': alter-table. also takes a metadata lock on the
table level.


File: manual.info,  Node: stored-programs-views,  Next: information-schema,  Prev: partitioning,  Up: Top

19 Stored Programs and Views
****************************

* Menu:

* stored-programs-defining::     Defining Stored Programs
* stored-routines::              Using Stored Routines (Procedures and Functions)
* triggers::                     Using Triggers
* events::                       Using the Event Scheduler
* views::                        Using Views
* stored-programs-security::     Access Control for Stored Programs and Views
* stored-programs-logging::      Binary Logging of Stored Programs

This chapter discusses stored programs and views, which are database
objects defined in terms of SQL code that is stored on the server for
later execution.

Stored programs include these objects:

   * Stored routines, that is, stored procedures and functions. A
     stored procedure is invoked using the *Note `CALL': call.
     statement. A procedure does not have a return value but can modify
     its parameters for later inspection by the caller. It can also
     generate result sets to be returned to the client program. A
     stored function is used much like a built-in function. you invoke
     it in an expression and it returns a value during expression
     evaluation.

   * Triggers. A trigger is a named database object that is associated
     with a table and that is activated when a particular event occurs
     for the table, such as an insert or update.

   * Events. An event is a task that the server runs according to
     schedule.

Views are stored queries that when referenced produce a result set.  A
view acts as a virtual table.

This chapter describes how to use stored programs and views. The
following sections provide additional information about SQL syntax for
statements related to these objects:

   * For each object type, there are `CREATE', `ALTER', and `DROP'
     statements that control which objects exist and how they are
     defined. See *Note sql-syntax-data-definition::.

   * The *Note `CALL': call. statement is used to invoke stored
     procedures. See *Note call::.

   * Stored program definitions include a body that may use compound
     statements, loops, conditionals, and declared variables. See *Note
     sql-syntax-compound-statements::.


File: manual.info,  Node: stored-programs-defining,  Next: stored-routines,  Prev: stored-programs-views,  Up: stored-programs-views

19.1 Defining Stored Programs
=============================

Each stored program contains a body that consists of an SQL statement.
This statement may be a compound statement made up of several
statements separated by semicolon (`;') characters. For example, the
following stored procedure has a body made up of a *Note `BEGIN ...
END': begin-end. block that contains a *Note `SET': set-statement.
statement and a *Note `REPEAT': repeat. loop that itself contains
another *Note `SET': set-statement.  statement:

     CREATE PROCEDURE dorepeat(p1 INT)
     BEGIN
       SET @x = 0;
       REPEAT SET @x = @x + 1; UNTIL @x > p1 END REPEAT;
     END;

If you use the *Note `mysql': mysql. client program to define a stored
program containing semicolon characters, a problem arises.  By default,
*Note `mysql': mysql. itself recognizes the semicolon as a statement
delimiter, so you must redefine the delimiter temporarily to cause
*Note `mysql': mysql. to pass the entire stored program definition to
the server.

To redefine the *Note `mysql': mysql. delimiter, use the `delimiter'
command. The following example shows how to do this for the
`dorepeat()' procedure just shown. The delimiter is changed to `//' to
enable the entire definition to be passed to the server as a single
statement, and then restored to `;' before invoking the procedure. This
enables the `;' delimiter used in the procedure body to be passed
through to the server rather than being interpreted by *Note `mysql':
mysql.  itself.

     mysql> delimiter //

     mysql> CREATE PROCEDURE dorepeat(p1 INT)
         -> BEGIN
         ->   SET @x = 0;
         ->   REPEAT SET @x = @x + 1; UNTIL @x > p1 END REPEAT;
         -> END
         -> //
     Query OK, 0 rows affected (0.00 sec)

     mysql> delimiter ;

     mysql> CALL dorepeat(1000);
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT @x;
     +------+
     | @x   |
     +------+
     | 1001 |
     +------+
     1 row in set (0.00 sec)

You can redefine the delimiter to a string other than `//', and the
delimiter can consist of a single character or multiple characters. You
should avoid the use of the backslash (``\'') character because that is
the escape character for MySQL.

The following is an example of a function that takes a parameter,
performs an operation using an SQL function, and returns the result. In
this case, it is unnecessary to use `delimiter' because the function
definition contains no internal `;' statement delimiters:

     mysql> CREATE FUNCTION hello (s CHAR(20))
     mysql> RETURNS CHAR(50) DETERMINISTIC
         -> RETURN CONCAT('Hello, ',s,'!');
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT hello('world');
     +----------------+
     | hello('world') |
     +----------------+
     | Hello, world!  |
     +----------------+
     1 row in set (0.00 sec)


File: manual.info,  Node: stored-routines,  Next: triggers,  Prev: stored-programs-defining,  Up: stored-programs-views

19.2 Using Stored Routines (Procedures and Functions)
=====================================================

* Menu:

* stored-routines-syntax::       Stored Routine Syntax
* stored-routines-privileges::   Stored Routines and MySQL Privileges
* stored-routines-metadata::     Stored Routine Metadata
* stored-routines-last-insert-id::  Stored Procedures, Functions, Triggers, and `LAST_INSERT_ID()'

Stored routines (procedures and functions) are supported in MySQL 5.5.
A stored routine is a set of SQL statements that can be stored in the
server. Once this has been done, clients don't need to keep reissuing
the individual statements but can refer to the stored routine instead.

Stored routines require the `proc' table in the `mysql' database. This
table is created during the MySQL 5.5 installation procedure. If you
are upgrading to MySQL 5.5 from an earlier version, be sure to update
your grant tables to make sure that the `proc' table exists. See *Note
mysql-upgrade::.

Stored routines can be particularly useful in certain situations:

   * When multiple client applications are written in different
     languages or work on different platforms, but need to perform the
     same database operations.

   * When security is paramount. Banks, for example, use stored
     procedures and functions for all common operations. This provides
     a consistent and secure environment, and routines can ensure that
     each operation is properly logged. In such a setup, applications
     and users would have no access to the database tables directly,
     but can only execute specific stored routines.

Stored routines can provide improved performance because less
information needs to be sent between the server and the client. The
tradeoff is that this does increase the load on the database server
because more of the work is done on the server side and less is done on
the client (application) side. Consider this if many client machines
(such as Web servers) are serviced by only one or a few database
servers.

Stored routines also enable you to have libraries of functions in the
database server. This is a feature shared by modern application
languages that enable such design internally (for example, by using
classes). Using these client application language features is
beneficial for the programmer even outside the scope of database use.

MySQL follows the SQL:2003 syntax for stored routines, which is also
used by IBM's DB2. All syntax described here is supported and any
limitations and extensions are documented where appropriate.

* Additional Resources *

   * You may find the Stored Procedures User Forum
     (http://forums.mysql.com/list.php?98) of use when working with
     stored procedures and functions.

   * For answers to some commonly asked questions regarding stored
     routines in MySQL, see *Note faqs-stored-procs::.

   * There are some restrictions on the use of stored routines. See
     *Note stored-program-restrictions::.

   * Binary logging for stored routines takes place as described in
     *Note stored-programs-logging::.


File: manual.info,  Node: stored-routines-syntax,  Next: stored-routines-privileges,  Prev: stored-routines,  Up: stored-routines

19.2.1 Stored Routine Syntax
----------------------------

A stored routine is either a procedure or a function. Stored routines
are created with the *Note `CREATE PROCEDURE': create-procedure. and
*Note `CREATE FUNCTION': create-function. statements (see *Note
create-procedure::). A procedure is invoked using a *Note `CALL': call.
statement (see *Note call::), and can only pass back values using
output variables. A function can be called from inside a statement just
like any other function (that is, by invoking the function's name), and
can return a scalar value. The body of a stored routine can use
compound statements (see *Note sql-syntax-compound-statements::).

Stored routines can be dropped with the *Note `DROP PROCEDURE':
drop-procedure. and *Note `DROP FUNCTION': drop-function. statements
(see *Note drop-procedure::), and altered with the *Note `ALTER
PROCEDURE': alter-procedure. and *Note `ALTER FUNCTION':
alter-function. statements (see *Note alter-procedure::).

A stored procedure or function is associated with a particular
database. This has several implications:

   * When the routine is invoked, an implicit `USE DB_NAME' is
     performed (and undone when the routine terminates).  *Note `USE':
     use. statements within stored routines are not permitted.

   * You can qualify routine names with the database name. This can be
     used to refer to a routine that is not in the current database.
     For example, to invoke a stored procedure `p' or function `f' that
     is associated with the `test' database, you can say `CALL
     test.p()' or `test.f()'.

   * When a database is dropped, all stored routines associated with it
     are dropped as well.

Stored functions cannot be recursive.

Recursion in stored procedures is permitted but disabled by default. To
enable recursion, set the `max_sp_recursion_depth' server system
variable to a value greater than zero. Stored procedure recursion
increases the demand on thread stack space. If you increase the value of
`max_sp_recursion_depth', it may be necessary to increase thread stack
size by increasing the value of `thread_stack' at server startup.  See
*Note server-system-variables::, for more information.

MySQL supports a very useful extension that enables the use of regular
*Note `SELECT': select. statements (that is, without using cursors or
local variables) inside a stored procedure. The result set of such a
query is simply sent directly to the client. Multiple *Note `SELECT':
select.  statements generate multiple result sets, so the client must
use a MySQL client library that supports multiple result sets. This
means the client must use a client library from a version of MySQL at
least as recent as 4.1. The client should also specify the
`CLIENT_MULTI_RESULTS' option when it connects.  For C programs, this
can be done with the *Note `mysql_real_connect()': mysql-real-connect.
C API function. See *Note mysql-real-connect::, and *Note
c-api-multiple-queries::.


File: manual.info,  Node: stored-routines-privileges,  Next: stored-routines-metadata,  Prev: stored-routines-syntax,  Up: stored-routines

19.2.2 Stored Routines and MySQL Privileges
-------------------------------------------

The MySQL grant system takes stored routines into account as follows:

   * The `CREATE ROUTINE' privilege is needed to create stored routines.

   * The `ALTER ROUTINE' privilege is needed to alter or drop stored
     routines. This privilege is granted automatically to the creator
     of a routine if necessary, and dropped from the creator when the
     routine is dropped.

   * The `EXECUTE' privilege is required to execute stored routines.
     However, this privilege is granted automatically to the creator of
     a routine if necessary (and dropped from the creator when the
     routine is dropped). Also, the default `SQL SECURITY'
     characteristic for a routine is `DEFINER', which enables users who
     have access to the database with which the routine is associated
     to execute the routine.

   * If the `automatic_sp_privileges' system variable is 0, the
     `EXECUTE' and `ALTER ROUTINE' privileges are not automatically
     granted to and dropped from the routine creator.

   * The creator of a routine is the account used to execute the
     `CREATE' statement for it. This might not be the same as the
     account named as the `DEFINER' in the routine definition.

The server manipulates the `mysql.proc' table in response to statements
that create, alter, or drop stored routines. It is not supported that
the server will notice manual manipulation of this table.


File: manual.info,  Node: stored-routines-metadata,  Next: stored-routines-last-insert-id,  Prev: stored-routines-privileges,  Up: stored-routines

19.2.3 Stored Routine Metadata
------------------------------

Metadata about stored routines can be obtained as follows:

   * Query the *Note `ROUTINES': routines-table. table of the
     `INFORMATION_SCHEMA' database. See *Note routines-table::.

   * Use the *Note `SHOW CREATE PROCEDURE': show-create-procedure.  and
     *Note `SHOW CREATE FUNCTION': show-create-function.  statements to
     see routine definitions. See *Note show-create-procedure::.

   * Use the *Note `SHOW PROCEDURE STATUS': show-procedure-status.  and
     *Note `SHOW FUNCTION STATUS': show-function-status.  statements to
     see routine characteristics. See *Note show-procedure-status::.


File: manual.info,  Node: stored-routines-last-insert-id,  Prev: stored-routines-metadata,  Up: stored-routines

19.2.4 Stored Procedures, Functions, Triggers, and `LAST_INSERT_ID()'
---------------------------------------------------------------------

Within the body of a stored routine (procedure or function) or a
trigger, the value of `LAST_INSERT_ID()' changes the same way as for
statements executed outside the body of these kinds of objects (see
*Note information-functions::). The effect of a stored routine or
trigger upon the value of `LAST_INSERT_ID()' that is seen by following
statements depends on the kind of routine:

   * If a stored procedure executes statements that change the value of
     `LAST_INSERT_ID()', the changed value is seen by statements that
     follow the procedure call.

   * For stored functions and triggers that change the value, the value
     is restored when the function or trigger ends, so following
     statements do not see a changed value.


File: manual.info,  Node: triggers,  Next: events,  Prev: stored-routines,  Up: stored-programs-views

19.3 Using Triggers
===================

* Menu:

* trigger-syntax::               Trigger Syntax and Examples
* trigger-metadata::             Trigger Metadata

A trigger is a named database object that is associated with a table,
and that activates when a particular event occurs for the table. Some
uses for triggers are to perform checks of values to be inserted into a
table or to perform calculations on values involved in an update.

A trigger is defined to activate when a statement inserts, updates, or
deletes rows in the associated table. These row operations are trigger
events. For example, rows can be inserted by *Note `INSERT': insert. or
*Note `LOAD DATA': load-data. statements, and an insert trigger
activates for each inserted row. A trigger can be set to activate
either before or after the trigger event. For example, you can have a
trigger activate before each row that is inserted into a table or after
each row that is updated.

*Important*:

MySQL triggers activate only for changes made to tables by SQL
statements. They do not activate for changes in views, nor by changes
to tables made by APIs that do not transmit SQL statements to the MySQL
Server. This means that:

   * Triggers are not activated by changes in `INFORMATION_SCHEMA' or
     `performance_schema' tables, because these tables are actually
     views.

   * Triggers are not activated by updates made using the *Note `NDB':
     mysql-cluster. API.

To use triggers if you have upgraded to MySQL 5.5 from an older release
that did not support triggers, you should upgrade your grant tables so
that they contain the trigger-related privileges. See *Note
mysql-upgrade::.

The following sections describe the syntax for creating and dropping
triggers, show some examples of how to use them, and indicate how to
obtain trigger metadata.

* Additional Resources *

   * You may find the Triggers User Forum
     (http://forums.mysql.com/list.php?100) of use when working with
     triggers.

   * For answers to commonly asked questions regarding triggers in
     MySQL, see *Note faqs-triggers::.

   * There are some restrictions on the use of triggers; see *Note
     stored-program-restrictions::.

   * Binary logging for triggers takes place as described in *Note
     stored-programs-logging::.


File: manual.info,  Node: trigger-syntax,  Next: trigger-metadata,  Prev: triggers,  Up: triggers

19.3.1 Trigger Syntax and Examples
----------------------------------

To create a trigger or drop a trigger, use the *Note `CREATE TRIGGER':
create-trigger. or *Note `DROP TRIGGER': drop-trigger. statement,
described in *Note create-trigger::, and *Note drop-trigger::.

Here is a simple example that associates a trigger with a table, to
activate for *Note `INSERT': insert. operations.  The trigger acts as
an accumulator, summing the values inserted into one of the columns of
the table.

     mysql> CREATE TABLE account (acct_num INT, amount DECIMAL(10,2));
     Query OK, 0 rows affected (0.03 sec)

     mysql> CREATE TRIGGER ins_sum BEFORE INSERT ON account
         -> FOR EACH ROW SET @sum = @sum + NEW.amount;
     Query OK, 0 rows affected (0.06 sec)

The *Note `CREATE TRIGGER': create-trigger. statement creates a trigger
named `ins_sum' that is associated with the `account' table. It also
includes clauses that specify the trigger action time, the triggering
event, and what to do when the trigger activates:

   * The keyword `BEFORE' indicates the trigger action time. In this
     case, the trigger activates before each row inserted into the
     table. The other permitted keyword here is `AFTER'.

   * The keyword `INSERT' indicates the trigger event; that is, the
     type of operation that activates the trigger. In the example,
     *Note `INSERT': insert.  operations cause trigger activation. You
     can also create triggers for *Note `DELETE': delete. and *Note
     `UPDATE': update. operations.

   * The statement following `FOR EACH ROW' defines the trigger body;
     that is, the statement to execute each time the trigger activates,
     which occurs once for each row affected by the triggering event.
     In the example, the trigger body is a simple *Note `SET':
     set-statement.  that accumulates into a user variable the values
     inserted into the `amount' column. The statement refers to the
     column as `NEW.amount' which means `the value of the `amount'
     column to be inserted into the new row.'

To use the trigger, set the accumulator variable to zero, execute an
*Note `INSERT': insert. statement, and then see what value the variable
has afterward:

     mysql> SET @sum = 0;
     mysql> INSERT INTO account VALUES(137,14.98),(141,1937.50),(97,-100.00);
     mysql> SELECT @sum AS 'Total amount inserted';
     +-----------------------+
     | Total amount inserted |
     +-----------------------+
     | 1852.48               |
     +-----------------------+

In this case, the value of `@sum' after the *Note `INSERT': insert.
statement has executed is `14.98 + 1937.50 - 100', or `1852.48'.

To destroy the trigger, use a *Note `DROP TRIGGER': drop-trigger.
statement. You must specify the schema name if the trigger is not in
the default schema:

     mysql> DROP TRIGGER test.ins_sum;

if you drop a table, any triggers for the table are also dropped.

Trigger names exist in the schema namespace, meaning that all triggers
must have unique names within a schema. Triggers in different schemas
can have the same name.

In addition to the requirement that trigger names be unique for a
schema, there are other limitations on the types of triggers you can
create. In particular, there cannot be multiple triggers for a given
table that have the same trigger event and action time. For example,
you cannot have two `BEFORE UPDATE' triggers for a table. To work
around this, you can define a trigger that executes multiple statements
by using the *Note `BEGIN ... END': begin-end.  compound statement
construct after `FOR EACH ROW'. (An example appears later in this
section.)

Within the trigger body, the `OLD' and `NEW' keywords enable you to
access columns in the rows affected by a trigger. `OLD' and `NEW' are
MySQL extensions to triggers; they are not case sensitive.

In an `INSERT' trigger, only `NEW.COL_NAME' can be used; there is no
old row. In a `DELETE' trigger, only `OLD.COL_NAME' can be used; there
is no new row. In an `UPDATE' trigger, you can use `OLD.COL_NAME' to
refer to the columns of a row before it is updated and `NEW.COL_NAME' to
refer to the columns of the row after it is updated.

A column named with `OLD' is read only. You can refer to it (if you
have the *Note `SELECT': select.  privilege), but not modify it. You
can refer to a column named with `NEW' if you have the `SELECT'
privilege for it. In a `BEFORE' trigger, you can also change its value
with `SET NEW.COL_NAME = VALUE' if you have the `UPDATE' privilege for
it. This means you can use a trigger to modify the values to be
inserted into a new row or used to update a row. (Such a `SET'
statement has no effect in an `AFTER' trigger because the row change
will have already occurred.)

In a `BEFORE' trigger, the `NEW' value for an `AUTO_INCREMENT' column
is 0, not the sequence number that is generated automatically when the
new row actually is inserted.

By using the *Note `BEGIN ... END': begin-end. construct, you can
define a trigger that executes multiple statements. Within the `BEGIN'
block, you also can use other syntax that is permitted within stored
routines such as conditionals and loops. However, just as for stored
routines, if you use the *Note `mysql': mysql. program to define a
trigger that executes multiple statements, it is necessary to redefine
the *Note `mysql': mysql. statement delimiter so that you can use the
`;' statement delimiter within the trigger definition. The following
example illustrates these points. It defines an `UPDATE' trigger that
checks the new value to be used for updating each row, and modifies the
value to be within the range from 0 to 100.  This must be a `BEFORE'
trigger because the value must be checked before it is used to update
the row:

     mysql> delimiter //
     mysql> CREATE TRIGGER upd_check BEFORE UPDATE ON account
         -> FOR EACH ROW
         -> BEGIN
         ->     IF NEW.amount < 0 THEN
         ->         SET NEW.amount = 0;
         ->     ELSEIF NEW.amount > 100 THEN
         ->         SET NEW.amount = 100;
         ->     END IF;
         -> END;//
     mysql> delimiter ;

It can be easier to define a stored procedure separately and then
invoke it from the trigger using a simple *Note `CALL': call.
statement. This is also advantageous if you want to execute the same
code from within several triggers.

There are limitations on what can appear in statements that a trigger
executes when activated:

   * The trigger cannot use the *Note `CALL': call.  statement to
     invoke stored procedures that return data to the client or that
     use dynamic SQL. (Stored procedures are permitted to return data
     to the trigger through `OUT' or `INOUT' parameters.)

   * The trigger cannot use statements that explicitly or implicitly
     begin or end a transaction, such as *Note `START TRANSACTION':
     commit, *Note `COMMIT': commit, or *Note `ROLLBACK': commit.

See also *Note stored-program-restrictions::.

MySQL handles errors during trigger execution as follows:

   * If a `BEFORE' trigger fails, the operation on the corresponding
     row is not performed.

   * A `BEFORE' trigger is activated by the _attempt_ to insert or
     modify the row, regardless of whether the attempt subsequently
     succeeds.

   * An `AFTER' trigger is executed only if any `BEFORE' triggers and
     the row operation execute successfully.

   * An error during either a `BEFORE' or `AFTER' trigger results in
     failure of the entire statement that caused trigger invocation.

   * For transactional tables, failure of a statement should cause
     rollback of all changes performed by the statement. Failure of a
     trigger causes the statement to fail, so trigger failure also
     causes rollback. For nontransactional tables, such rollback cannot
     be done, so although the statement fails, any changes performed
     prior to the point of the error remain in effect.

In MySQL 5.5, triggers can contain direct references to tables by name,
such as the trigger named `testref' shown in this example:

     CREATE TABLE test1(a1 INT);
     CREATE TABLE test2(a2 INT);
     CREATE TABLE test3(a3 INT NOT NULL AUTO_INCREMENT PRIMARY KEY);
     CREATE TABLE test4(
       a4 INT NOT NULL AUTO_INCREMENT PRIMARY KEY,
       b4 INT DEFAULT 0
     );

     delimiter |

     CREATE TRIGGER testref BEFORE INSERT ON test1
       FOR EACH ROW
       BEGIN
         INSERT INTO test2 SET a2 = NEW.a1;
         DELETE FROM test3 WHERE a3 = NEW.a1;
         UPDATE test4 SET b4 = b4 + 1 WHERE a4 = NEW.a1;
       END;
     |

     delimiter ;

     INSERT INTO test3 (a3) VALUES
       (NULL), (NULL), (NULL), (NULL), (NULL),
       (NULL), (NULL), (NULL), (NULL), (NULL);

     INSERT INTO test4 (a4) VALUES
       (0), (0), (0), (0), (0), (0), (0), (0), (0), (0);

Suppose that you insert the following values into table `test1' as
shown here:

     mysql> INSERT INTO test1 VALUES
         -> (1), (3), (1), (7), (1), (8), (4), (4);
     Query OK, 8 rows affected (0.01 sec)
     Records: 8  Duplicates: 0  Warnings: 0

As a result, the four tables contain the following data:

     mysql> SELECT * FROM test1;
     +------+
     | a1   |
     +------+
     |    1 |
     |    3 |
     |    1 |
     |    7 |
     |    1 |
     |    8 |
     |    4 |
     |    4 |
     +------+
     8 rows in set (0.00 sec)

     mysql> SELECT * FROM test2;
     +------+
     | a2   |
     +------+
     |    1 |
     |    3 |
     |    1 |
     |    7 |
     |    1 |
     |    8 |
     |    4 |
     |    4 |
     +------+
     8 rows in set (0.00 sec)

     mysql> SELECT * FROM test3;
     +----+
     | a3 |
     +----+
     |  2 |
     |  5 |
     |  6 |
     |  9 |
     | 10 |
     +----+
     5 rows in set (0.00 sec)

     mysql> SELECT * FROM test4;
     +----+------+
     | a4 | b4   |
     +----+------+
     |  1 |    3 |
     |  2 |    0 |
     |  3 |    1 |
     |  4 |    2 |
     |  5 |    0 |
     |  6 |    0 |
     |  7 |    1 |
     |  8 |    1 |
     |  9 |    0 |
     | 10 |    0 |
     +----+------+
     10 rows in set (0.00 sec)


File: manual.info,  Node: trigger-metadata,  Prev: trigger-syntax,  Up: triggers

19.3.2 Trigger Metadata
-----------------------

Metadata about triggers can be obtained as follows:

   * Query the *Note `TRIGGERS': triggers-table. table of the
     `INFORMATION_SCHEMA' database. See *Note triggers-table::.

   * Use the *Note `SHOW CREATE TRIGGER': show-create-trigger.
     statement. See *Note show-create-trigger::.

   * Use the *Note `SHOW TRIGGERS': show-triggers.  statement. See
     *Note show-triggers::.


File: manual.info,  Node: events,  Next: views,  Prev: triggers,  Up: stored-programs-views

19.4 Using the Event Scheduler
==============================

* Menu:

* events-overview::              Event Scheduler Overview
* events-configuration::         Event Scheduler Configuration
* events-syntax::                Event Syntax
* events-metadata::              Event Metadata
* events-status-info::           Event Scheduler Status
* events-privileges::            The Event Scheduler and MySQL Privileges

The _MySQL Event Scheduler_ manages the scheduling and execution of
events: Tasks that run according to schedule. The following discussion
covers the Event Scheduler and is divided into the following sections:

   * *Note events-overview::, provides an introduction to and
     conceptual overview of MySQL Events.

   * *Note events-syntax::, discusses the SQL statements for creating,
     altering, and dropping MySQL Events.

   * *Note events-metadata::, shows how to obtain information about
     events and how this information is stored by the MySQL Server.

   * *Note events-privileges::, discusses the privileges required to
     work with events and the ramifications that events have with
     regard to privileges when executing.

Stored routines require the `event' table in the `mysql' database. This
table is created during the MySQL 5.5 installation procedure. If you
are upgrading to MySQL 5.5 from an earlier version, be sure to update
your grant tables to make sure that the `event' table exists. See *Note
mysql-upgrade::.

* Additional Resources *

   * You may find the MySQL Event Scheduler User Forum
     (http://forums.mysql.com/list.php?119) of use when working with
     scheduled events.

   * There are some restrictions on the use of events; see *Note
     stored-program-restrictions::.

   * Binary logging for events takes place as described in *Note
     stored-programs-logging::.


File: manual.info,  Node: events-overview,  Next: events-configuration,  Prev: events,  Up: events

19.4.1 Event Scheduler Overview
-------------------------------

MySQL Events are tasks that run according to a schedule.  Therefore, we
sometimes refer to them as _scheduled_ events. When you create an event,
you are creating a named database object containing one or more SQL
statements to be executed at one or more regular intervals, beginning
and ending at a specific date and time. Conceptually, this is similar
to the idea of the Unix `crontab' (also known as a `cron job') or the
Windows Task Scheduler.

Scheduled tasks of this type are also sometimes known as `temporal
triggers', implying that these are objects that are triggered by the
passage of time. While this is essentially correct, we prefer to use
the term _events_ to avoid confusion with triggers of the type
discussed in *Note triggers::. Events should more specifically not be
confused with `temporary triggers'. Whereas a trigger is a database
object whose statements are executed in response to a specific type of
event that occurs on a given table, a (scheduled) event is an object
whose statements are executed in response to the passage of a specified
time interval.

While there is no provision in the SQL Standard for event scheduling,
there are precedents in other database systems, and you may notice some
similarities between these implementations and that found in the MySQL
Server.

MySQL Events have the following major features and properties:

   * In MySQL 5.5, an event is uniquely identified by its name and the
     schema to which it is assigned.

   * An event performs a specific action according to a schedule.  This
     action consists of an SQL statement, which can be a compound
     statement in a *Note `BEGIN ... END': begin-end. block if desired
     (see *Note sql-syntax-compound-statements::). An event's timing
     can be either _one-time_ or _recurrent_. A one-time event executes
     one time only. A recurrent event repeats its action at a regular
     interval, and the schedule for a recurring event can be assigned a
     specific start day and time, end day and time, both, or neither.
     (By default, a recurring event's schedule begins as soon as it is
     created, and continues indefinitely, until it is disabled or
     dropped.)

     If a repeating event does not terminate within its scheduling
     interval, the result may be multiple instances of the event
     executing simultaneously. If this is undesirable, you should
     institute a mechanism to prevent simultaneous instances. For
     example, you could use the `GET_LOCK()' function, or row or table
     locking.

   * Users can create, modify, and drop scheduled events using SQL
     statements intended for these purposes. Syntactically invalid
     event creation and modification statements fail with an
     appropriate error message. _A user may include statements in an
     event's action which require privileges that the user does not
     actually have_. The event creation or modification statement
     succeeds but the event's action fails. See *Note
     events-privileges:: for details.

   * Many of the properties of an event can be set or modified using
     SQL statements. These properties include the event's name, timing,
     persistence (that is, whether it is preserved following the
     expiration of its schedule), status (enabled or disabled), action
     to be performed, and the schema to which it is assigned. See *Note
     alter-event::.

     The default definer of an event is the user who created the event,
     unless the event has been altered, in which case the definer is
     the user who issued the last *Note `ALTER EVENT': alter-event.
     statement affecting that event. An event can be modified by any
     user having the `EVENT' privilege on the database for which the
     event is defined. See *Note events-privileges::.

   * An event's action statement may include most SQL statements
     permitted within stored routines. For restrictions, see *Note
     stored-program-restrictions::.


File: manual.info,  Node: events-configuration,  Next: events-syntax,  Prev: events-overview,  Up: events

19.4.2 Event Scheduler Configuration
------------------------------------

Events are executed by a special _event scheduler thread_; when we
refer to the Event Scheduler, we actually refer to this thread. When
running, the event scheduler thread and its current state can be seen
by users having the `PROCESS' privilege in the output of *Note `SHOW
PROCESSLIST': show-processlist, as shown in the discussion that follows.

The global `event_scheduler' system variable determines whether the
Event Scheduler is enabled and running on the server. It has one of
these 3 values, which affect event scheduling as described here:

   * `OFF': The Event Scheduler is stopped. The event scheduler thread
     does not run, is not shown in the output of *Note `SHOW
     PROCESSLIST': show-processlist, and no scheduled events are
     executed. `OFF' is the default value for `event_scheduler'.

     When the Event Scheduler is stopped (`event_scheduler' is `OFF'),
     it can be started by setting the value of `event_scheduler' to
     `ON'. (See next item.)

   * `ON': The Event Scheduler is started; the event scheduler thread
     runs and executes all scheduled events.

     When the Event Scheduler is `ON', the event scheduler thread is
     listed in the output of *Note `SHOW PROCESSLIST':
     show-processlist. as a daemon process, and its state is
     represented as shown here:

          mysql> SHOW PROCESSLIST\G
          *************************** 1. row ***************************
               Id: 1
             User: root
             Host: localhost
               db: NULL
          Command: Query
             Time: 0
            State: NULL
             Info: show processlist
          *************************** 2. row ***************************
               Id: 2
             User: event_scheduler
             Host: localhost
               db: NULL
          Command: Daemon
             Time: 3
            State: Waiting for next activation
             Info: NULL
          2 rows in set (0.00 sec)

     Event scheduling can be stopped by setting the value of
     `event_scheduler' to `OFF'.

   * `DISABLED': This value renders the Event Scheduler nonoperational.
     When the Event Scheduler is `DISABLED', the event scheduler thread
     does not run (and so does not appear in the output of *Note `SHOW
     PROCESSLIST': show-processlist.). In addition, the Event Scheduler
     state cannot be changed at runtime.

If the Event Scheduler status has not been set to `DISABLED',
`event_scheduler' can be toggled between `ON' and `OFF' (using *Note
`SET': set-statement.). It is also possible to use `0' for `OFF', and
`1' for `ON' when setting this variable. Thus, any of the following 4
statements can be used in the *Note `mysql': mysql.  client to turn on
the Event Scheduler:

     SET GLOBAL event_scheduler = ON;
     SET @@global.event_scheduler = ON;
     SET GLOBAL event_scheduler = 1;
     SET @@global.event_scheduler = 1;

Similarly, any of these 4 statements can be used to turn off the Event
Scheduler:

     SET GLOBAL event_scheduler = OFF;
     SET @@global.event_scheduler = OFF;
     SET GLOBAL event_scheduler = 0;
     SET @@global.event_scheduler = 0;

Although `ON' and `OFF' have numeric equivalents, the value displayed
for `event_scheduler' by *Note `SELECT': select. or *Note `SHOW
VARIABLES': show-variables. is always one of `OFF', `ON', or `DISABLED'.
_`DISABLED' has no numeric equivalent_. For this reason, `ON' and `OFF'
are usually preferred over `1' and `0' when setting this variable.

Note that attempting to set `event_scheduler' without specifying it as
a global variable causes an error:

     mysql< SET @@event_scheduler = OFF;
     `ERROR 1229 (HY000): Variable 'event_scheduler' is a GLOBAL
     variable and should be set with SET GLOBAL'

*Important*:

It is possible to set the Event Scheduler to `DISABLED' only at server
startup. If `event_scheduler' is `ON' or `OFF', you cannot set it to
`DISABLED' at runtime. Also, if the Event Scheduler is set to
`DISABLED' at startup, you cannot change the value of `event_scheduler'
at runtime.

To disable the event scheduler, use one of the following two methods:

   * As a command-line option when starting the server:

          --event-scheduler=DISABLED

   * In the server configuration file (`my.cnf', or `my.ini' on Windows
     systems), include the line where it will be read by the server
     (for example, in a `[mysqld]' section):

          event_scheduler=DISABLED

To enable the Event Scheduler, restart the server without the
`--event-scheduler=DISABLED' command-line option, or after removing or
commenting out the line containing `event-scheduler=DISABLED' in the
server configuration file, as appropriate. Alternatively, you can use
`ON' (or `1') or `OFF' (or `0') in place of the `DISABLED' value when
starting the server.

*Note*:

You can issue event-manipulation statements when `event_scheduler' is
set to `DISABLED'. No warnings or errors are generated in such cases
(provided that the statements are themselves valid). However, scheduled
events cannot execute until this variable is set to `ON' (or `1'). Once
this has been done, the event scheduler thread executes all events
whose scheduling conditions are satisfied.

Starting the MySQL server with the `--skip-grant-tables' option causes
`event_scheduler' to be set to `DISABLED', overriding any other value
set either on the command line or in the `my.cnf' or `my.ini' file (Bug
#26807).

For SQL statements used to create, alter, and drop events, see *Note
events-syntax::.

MySQL 5.5 provides an *Note `EVENTS': events-table. table in the
`INFORMATION_SCHEMA' database. This table can be queried to obtain
information about scheduled events which have been defined on the
server. See *Note events-metadata::, and *Note events-table::, for more
information.

For information regarding event scheduling and the MySQL privilege
system, see *Note events-privileges::.


File: manual.info,  Node: events-syntax,  Next: events-metadata,  Prev: events-configuration,  Up: events

19.4.3 Event Syntax
-------------------

MySQL 5.5 provides several SQL statements for working with scheduled
events:

   * New events are defined using the *Note `CREATE EVENT':
     create-event. statement. See *Note create-event::.

   * The definition of an existing event can be changed by means of the
     *Note `ALTER EVENT': alter-event. statement. See *Note
     alter-event::.

   * When a scheduled event is no longer wanted or needed, it can be
     deleted from the server by its definer using the *Note `DROP
     EVENT': drop-event. statement. See *Note drop-event::. Whether an
     event persists past the end of its schedule also depends on its `ON
     COMPLETION' clause, if it has one. See *Note create-event::.

     An event can be dropped by any user having the `EVENT' privilege
     for the database on which the event is defined. See *Note
     events-privileges::.


File: manual.info,  Node: events-metadata,  Next: events-status-info,  Prev: events-syntax,  Up: events

19.4.4 Event Metadata
---------------------

Metadata about events can be obtained as follows:

   * Query the `event' table of the `mysql' database.

   * Query the *Note `EVENTS': events-table. table of the
     `INFORMATION_SCHEMA' database. See *Note events-table::.

   * Use the *Note `SHOW CREATE EVENT': show-create-event.  statement.
     See *Note show-create-event::.

   * Use the *Note `SHOW EVENTS': show-events. statement.  See *Note
     show-events::.

*Event Scheduler Time Representation*

Each session in MySQL has a session time zone (STZ). This is the
session `time_zone' value that is initialized from the server's global
`time_zone' value when the session begins but may be changed during the
session.

The session time zone that is current when a *Note `CREATE EVENT':
create-event. or *Note `ALTER EVENT': alter-event. statement executes is
used to interpret times specified in the event definition. This becomes
the event time zone (ETZ); that is, the time zone that is used for
event scheduling and is in effect within the event as it executes.

For representation of event information in the `mysql.event' table, the
`execute_at', `starts', and `ends' times are converted to UTC and stored
along with the event time zone. This enables event execution to proceed
as defined regardless of any subsequent changes to the server time zone
or daylight saving time effects. The `last_executed' time is also
stored in UTC.

If you select information from `mysql.event', the times just mentioned
are retrieved as UTC values. These times can also be obtained by
selecting from the *Note `INFORMATION_SCHEMA.EVENTS': events-table.
table or from *Note `SHOW EVENTS': show-events, but they are reported
as ETZ values. Other times available from these sources indicate when
an event was created or last altered; these are displayed as STZ
values. The following table summarizes representation of event times.

This table summarizes the representation of event times (as UTC, EZT,
or STZ values) from `mysql.event', *Note `INFORMATION_SCHEMA.EVENTS':
events-table, and *Note `SHOW EVENTS': show-events.

Value              `mysql.event'      *Note              *Note `SHOW
                                      `INFORMATION_SCHEMA.EVENTS':EVENTS':
                                      events-table.      show-events.
Execute at         UTC                ETZ                ETZ
Starts             UTC                ETZ                ETZ
Ends               UTC                ETZ                ETZ
Last executed      UTC                ETZ                n/a
Created            STZ                STZ                n/a
Last altered       STZ                STZ                n/a


File: manual.info,  Node: events-status-info,  Next: events-privileges,  Prev: events-metadata,  Up: events

19.4.5 Event Scheduler Status
-----------------------------

The Event Scheduler writes information about event execution that
terminates with an error or warning to the MySQL Server's error log.
See *Note events-privileges:: for an example.

Information about the state of the Event Scheduler for debugging and
troubleshooting purposes can be obtained by running *Note `mysqladmin
debug': mysqladmin. (see *Note mysqladmin::); after running this
command, the server's error log contains output relating to the Event
Scheduler, similar to what is shown here:

     Events status:
     LLA = Last Locked At  LUA = Last Unlocked At
     WOC = Waiting On Condition  DL = Data Locked

     Event scheduler status:
     State      : INITIALIZED
     Thread id  : 0
     LLA        : init_scheduler:313
     LUA        : init_scheduler:318
     WOC        : NO
     Workers    : 0
     Executed   : 0
     Data locked: NO

     Event queue status:
     Element count   : 1
     Data locked     : NO
     Attempting lock : NO
     LLA             : init_queue:148
     LUA             : init_queue:168
     WOC             : NO
     Next activation : 0000-00-00 00:00:00

In statements that occur as part of events executed by the Event
Scheduler, diagnostics messages (not only errors, but also warnings)
are written to the error log, and, on Windows, to the application event
log. For frequently executed events, it is possible for this to result
in many logged messages. For example, for `SELECT ... INTO VAR_LIST'
statements, if the query returns no rows, a warning with error code
1329 occurs (`No data'), and the variable values remain unchanged. If
the query returns multiple rows, error 1172 occurs (`Result consisted
of more than one row'). For either condition, you can avoid having the
warnings be logged by declaring a condition handler; see *Note
declare-handler::. For statements that may retrieve multiple rows,
another strategy is to use `LIMIT 1' to limit the result set to a
single row.


File: manual.info,  Node: events-privileges,  Prev: events-status-info,  Up: events

19.4.6 The Event Scheduler and MySQL Privileges
-----------------------------------------------

To enable or disable the execution of scheduled events, it is necessary
to set the value of the global `event_scheduler' system variable.  This
requires the `SUPER' privilege.

The `EVENT' privilege governs the creation, modification, and deletion
of events. This privilege can be bestowed using *Note `GRANT': grant.
For example, this *Note `GRANT': grant. statement confers the `EVENT'
privilege for the schema named `myschema' on the user `jon@ghidora':

     GRANT EVENT ON myschema.* TO jon@ghidora;

(We assume that this user account already exists, and that we wish for
it to remain unchanged otherwise.)

To grant this same user the `EVENT' privilege on all schemas, use the
following statement:

     GRANT EVENT ON *.* TO jon@ghidora;

The `EVENT' privilege has global or schema-level scope. Therefore,
trying to grant it on a single table results in an error as shown:

     mysql> GRANT EVENT ON myschema.mytable TO jon@ghidora;
     `ERROR 1144 (42000): Illegal GRANT/REVOKE command; please
     consult the manual to see which privileges can be used'

It is important to understand that an event is executed with the
privileges of its definer, and that it cannot perform any actions for
which its definer does not have the requisite privileges. For example,
suppose that `jon@ghidora' has the `EVENT' privilege for `myschema'.
Suppose also that this user has the `SELECT' privilege for `myschema',
but no other privileges for this schema. It is possible for
`jon@ghidora' to create a new event such as this one:

     CREATE EVENT e_store_ts
         ON SCHEDULE
           EVERY 10 SECOND
         DO
           INSERT INTO myschema.mytable VALUES (UNIX_TIMESTAMP());

The user waits for a minute or so, and then performs a `SELECT * FROM
mytable;' query, expecting to see several new rows in the table.
Instead, the table is empty. Since the user does not have the `INSERT'
privilege for the table in question, the event has no effect.

If you inspect the MySQL error log (`HOSTNAME.err'), you can see that
the event is executing, but the action it is attempting to perform
fails, as indicated by `RetCode=0':

     060209 22:39:44 [Note]     EVEX EXECUTING event newdb.e [EXPR:10]
     060209 22:39:44 [Note]     EVEX EXECUTED event newdb.e  [EXPR:10]. RetCode=0
     060209 22:39:54 [Note]     EVEX EXECUTING event newdb.e [EXPR:10]
     060209 22:39:54 [Note]     EVEX EXECUTED event newdb.e  [EXPR:10]. RetCode=0
     060209 22:40:04 [Note]     EVEX EXECUTING event newdb.e [EXPR:10]
     060209 22:40:04 [Note]     EVEX EXECUTED event newdb.e  [EXPR:10]. RetCode=0

Since this user very likely does not have access to the error log, it
is possible to verify whether the event's action statement is valid by
executing it directly:

     mysql> INSERT INTO myschema.mytable VALUES (UNIX_TIMESTAMP());
     `ERROR 1142 (42000): INSERT command denied to user
     'jon'@'ghidora' for table 'mytable''

Inspection of the *Note `INFORMATION_SCHEMA.EVENTS': events-table.
table shows that `e_store_ts' exists and is enabled, but its
`LAST_EXECUTED' column is `NULL':

     mysql> SELECT * FROM INFORMATION_SCHEMA.EVENTS
          >     WHERE EVENT_NAME='e_store_ts'
          >     AND EVENT_SCHEMA='myschema'\G
     *************************** 1. row ***************************
        EVENT_CATALOG: NULL
         EVENT_SCHEMA: myschema
           EVENT_NAME: e_store_ts
              DEFINER: jon@ghidora
           EVENT_BODY: SQL
     EVENT_DEFINITION: INSERT INTO myschema.mytable VALUES (UNIX_TIMESTAMP())
           EVENT_TYPE: RECURRING
           EXECUTE_AT: NULL
       INTERVAL_VALUE: 5
       INTERVAL_FIELD: SECOND
             SQL_MODE: NULL
               STARTS: 0000-00-00 00:00:00
                 ENDS: 0000-00-00 00:00:00
               STATUS: ENABLED
        ON_COMPLETION: NOT PRESERVE
              CREATED: 2006-02-09 22:36:06
         LAST_ALTERED: 2006-02-09 22:36:06
        LAST_EXECUTED: NULL
        EVENT_COMMENT:
     1 row in set (0.00 sec)

To rescind the `EVENT' privilege, use the *Note `REVOKE': revoke.
statement. In this example, the `EVENT' privilege on the schema
`myschema' is removed from the `jon@ghidora' user account:

     REVOKE EVENT ON myschema.* FROM jon@ghidora;

*Important*:

Revoking the `EVENT' privilege from a user does not delete or disable
any events that may have been created by that user.

An event is not migrated or dropped as a result of renaming or dropping
the user who created it.

Suppose that the user `jon@ghidora' has been granted the `EVENT' and
`INSERT' privileges on the `myschema' schema. This user then creates the
following event:

     CREATE EVENT e_insert
         ON SCHEDULE
           EVERY 7 SECOND
         DO
           INSERT INTO myschema.mytable;

After this event has been created, `root' revokes the `EVENT' privilege
for `jon@ghidora'. However, `e_insert' continues to execute, inserting
a new row into `mytable' each seven seconds. The same would be true if
`root' had issued either of these statements:

   * `DROP USER jon@ghidora;'

   * `RENAME USER jon@ghidora TO someotherguy@ghidora;'

You can verify that this is true by examining the `mysql.event' table
(discussed later in this section) or the *Note
`INFORMATION_SCHEMA.EVENTS': events-table. table (see *Note
events-table::) before and after issuing a *Note `DROP USER':
drop-user. or *Note `RENAME USER': rename-user. statement.

Event definitions are stored in the `mysql.event' table. To drop an
event created by another user account, the MySQL `root' user (or
another user with the necessary privileges) can delete rows from this
table. For example, to remove the event `e_insert' shown previously,
`root' can use the following statement:

     DELETE FROM mysql.event
         WHERE db = 'myschema'
           AND definer = 'jon@ghidora'
           AND name = 'e_insert';

It is very important to match the event name, database schema name, and
user account when deleting rows from the `mysql.event' table. This is
because the same user can create different events of the same name in
different schemas.

Users' `EVENT' privileges are stored in the `Event_priv' columns of the
`mysql.user' and `mysql.db' tables. In both cases, this column holds
one of the values '`Y'' or '`N''.  '`N'' is the default.
`mysql.user.Event_priv' is set to '`Y'' for a given user only if that
user has the global `EVENT' privilege (that is, if the privilege was
bestowed using `GRANT EVENT ON *.*'). For a schema-level `EVENT'
privilege, *Note `GRANT': grant. creates a row in `mysql.db' and sets
that row's `Db' column to the name of the schema, the `User' column to
the name of the user, and the `Event_priv' column to '`Y''.  There
should never be any need to manipulate these tables directly, since the
*Note `GRANT EVENT': grant. and `REVOKE EVENT' statements perform the
required operations on them.

Five status variables provide counts of event-related operations (but
_not_ of statements executed by events; see *Note
stored-program-restrictions::). These are:

   * `Com_create_event': The number of *Note `CREATE EVENT':
     create-event. statements executed since the last server restart.

   * `Com_alter_event': The number of *Note `ALTER EVENT': alter-event.
     statements executed since the last server restart.

   * `Com_drop_event': The number of *Note `DROP EVENT': drop-event.
     statements executed since the last server restart.

   * `Com_show_create_event': The number of *Note `SHOW CREATE EVENT':
     show-create-event. statements executed since the last server
     restart.

   * `Com_show_events': The number of *Note `SHOW EVENTS': show-events.
     statements executed since the last server restart.

You can view current values for all of these at one time by running the
statement `SHOW STATUS LIKE '%event%';'.


File: manual.info,  Node: views,  Next: stored-programs-security,  Prev: events,  Up: stored-programs-views

19.5 Using Views
================

* Menu:

* view-syntax::                  View Syntax
* view-algorithms::              View Processing Algorithms
* view-updatability::            Updatable and Insertable Views
* view-metadata::                View Metadata

Views (including updatable views) are available in MySQL Server 5.5.
Views are stored queries that when invoked produce a result set. A view
acts as a virtual table.

To use views if you have upgraded to MySQL 5.5 from an older release
that did not support views, you should upgrade your grant tables so
that they contain the view-related privileges. See *Note
mysql-upgrade::.

The following discussion describes the syntax for creating and dropping
views, and shows some examples of how to use them.

* Additional Resources *

   * You may find the Views User Forum
     (http://forums.mysql.com/list.php?100) of use when working with
     views.

   * For answers to some commonly asked questions regarding views in
     MySQL, see *Note faqs-views::.

   * There are some restrictions on the use of views; see *Note
     view-restrictions::.


File: manual.info,  Node: view-syntax,  Next: view-algorithms,  Prev: views,  Up: views

19.5.1 View Syntax
------------------

The *Note `CREATE VIEW': create-view. statement creates a new view (see
*Note create-view::). To alter the definition of a view or drop a view,
use *Note `ALTER VIEW': alter-view. (see *Note alter-view::), or *Note
`DROP VIEW': drop-view. (see *Note drop-view::).

A view can be created from many kinds of *Note `SELECT': select.
statements. It can refer to base tables or other views. It can use
joins, *Note `UNION': union, and subqueries. The *Note `SELECT':
select. need not even refer to any tables. The following example
defines a view that selects two columns from another table, as well as
an expression calculated from those columns:

     mysql> CREATE TABLE t (qty INT, price INT);
     mysql> INSERT INTO t VALUES(3, 50), (5, 60);
     mysql> CREATE VIEW v AS SELECT qty, price, qty*price AS value FROM t;
     mysql> SELECT * FROM v;
     +------+-------+-------+
     | qty  | price | value |
     +------+-------+-------+
     |    3 |    50 |   150 |
     |    5 |    60 |   300 |
     +------+-------+-------+
     mysql> SELECT * FROM v WHERE qty = 5;
     +------+-------+-------+
     | qty  | price | value |
     +------+-------+-------+
     |    5 |    60 |   300 |
     +------+-------+-------+


File: manual.info,  Node: view-algorithms,  Next: view-updatability,  Prev: view-syntax,  Up: views

19.5.2 View Processing Algorithms
---------------------------------

The optional `ALGORITHM' clause for *Note `CREATE VIEW': create-view. or
*Note `ALTER VIEW': alter-view. is a MySQL extension to standard SQL.
It affects how MySQL processes the view.  `ALGORITHM' takes three
values: `MERGE', `TEMPTABLE', or `UNDEFINED'. The default algorithm is
`UNDEFINED' if no `ALGORITHM' clause is present.

For `MERGE', the text of a statement that refers to the view and the
view definition are merged such that parts of the view definition
replace corresponding parts of the statement.

For `TEMPTABLE', the results from the view are retrieved into a
temporary table, which then is used to execute the statement.

For `UNDEFINED', MySQL chooses which algorithm to use. It prefers
`MERGE' over `TEMPTABLE' if possible, because `MERGE' is usually more
efficient and because a view cannot be updatable if a temporary table
is used.

A reason to choose `TEMPTABLE' explicitly is that locks can be released
on underlying tables after the temporary table has been created and
before it is used to finish processing the statement. This might result
in quicker lock release than the `MERGE' algorithm so that other
clients that use the view are not blocked as long.

A view algorithm can be `UNDEFINED' for three reasons:

   * No `ALGORITHM' clause is present in the *Note `CREATE VIEW':
     create-view. statement.

   * The *Note `CREATE VIEW': create-view. statement has an explicit
     `ALGORITHM = UNDEFINED' clause.

   * `ALGORITHM = MERGE' is specified for a view that can be processed
     only with a temporary table. In this case, MySQL generates a
     warning and sets the algorithm to `UNDEFINED'.

As mentioned earlier, `MERGE' is handled by merging corresponding parts
of a view definition into the statement that refers to the view. The
following examples briefly illustrate how the `MERGE' algorithm works.
The examples assume that there is a view `v_merge' that has this
definition:

     CREATE ALGORITHM = MERGE VIEW v_merge (vc1, vc2) AS
     SELECT c1, c2 FROM t WHERE c3 > 100;

Example 1: Suppose that we issue this statement:

     SELECT * FROM v_merge;

MySQL handles the statement as follows:

   * `v_merge' becomes `t'

   * `*' becomes `vc1, vc2', which corresponds to `c1, c2'

   * The view `WHERE' clause is added

The resulting statement to be executed becomes:

     SELECT c1, c2 FROM t WHERE c3 > 100;

Example 2: Suppose that we issue this statement:

     SELECT * FROM v_merge WHERE vc1 < 100;

This statement is handled similarly to the previous one, except that
`vc1 < 100' becomes `c1 < 100' and the view `WHERE' clause is added to
the statement `WHERE' clause using an `AND' connective (and parentheses
are added to make sure the parts of the clause are executed with
correct precedence). The resulting statement to be executed becomes:

     SELECT c1, c2 FROM t WHERE (c3 > 100) AND (c1 < 100);

Effectively, the statement to be executed has a `WHERE' clause of this
form:

     WHERE (select WHERE) AND (view WHERE)

If the `MERGE' algorithm cannot be used, a temporary table must be used
instead. `MERGE' cannot be used if the view contains any of the
following constructs:

   * Aggregate functions (`SUM()', `MIN()', `MAX()', `COUNT()', and so
     forth)

   * `DISTINCT'

   * `GROUP BY'

   * `HAVING'

   * `LIMIT'

   * *Note `UNION': union. or *Note `UNION ALL': union.

   * Subquery in the select list

   * Refers only to literal values (in this case, there is no
     underlying table)


File: manual.info,  Node: view-updatability,  Next: view-metadata,  Prev: view-algorithms,  Up: views

19.5.3 Updatable and Insertable Views
-------------------------------------

Some views are updatable. That is, you can use them in statements such
as *Note `UPDATE': update, *Note `DELETE': delete, or *Note `INSERT':
insert. to update the contents of the underlying table. For a view to
be updatable, there must be a one-to-one relationship between the rows
in the view and the rows in the underlying table. There are also
certain other constructs that make a view nonupdatable. To be more
specific, a view is not updatable if it contains any of the following:

   * Aggregate functions (`SUM()', `MIN()', `MAX()', `COUNT()', and so
     forth)

   * `DISTINCT'

   * `GROUP BY'

   * `HAVING'

   * *Note `UNION': union. or *Note `UNION ALL': union.

   * Subquery in the select list

   * Certain joins (see additional join discussion later in this
     section)

   * Nonupdatable view in the `FROM' clause

   * A subquery in the `WHERE' clause that refers to a table in the
     `FROM' clause

   * Refers only to literal values (in this case, there is no
     underlying table to update)

   * Uses `ALGORITHM = TEMPTABLE' (use of a temporary table always
     makes a view nonupdatable)

   * Multiple references to any column of a base table.

With respect to insertability (being updatable with *Note `INSERT':
insert. statements), an updatable view is insertable if it also
satisfies these additional requirements for the view columns:

   * There must be no duplicate view column names.

   * The view must contain all columns in the base table that do not
     have a default value.

   * The view columns must be simple column references and not derived
     columns. A derived column is one that is not a simple column
     reference but is derived from an expression. These are examples of
     derived columns:

          3.14159
          col1 + 3
          UPPER(col2)
          col3 / col4
          (SUBQUERY)

A view that has a mix of simple column references and derived columns
is not insertable, but it can be updatable if you update only those
columns that are not derived. Consider this view:

     CREATE VIEW v AS SELECT col1, 1 AS col2 FROM t;

This view is not insertable because `col2' is derived from an
expression. But it is updatable if the update does not try to update
`col2'. This update is permissible:

     UPDATE v SET col1 = 0;

This update is not permissible because it attempts to update a derived
column:

     UPDATE v SET col2 = 0;

It is sometimes possible for a multiple-table view to be updatable,
assuming that it can be processed with the `MERGE' algorithm. For this
to work, the view must use an inner join (not an outer join or a *Note
`UNION': union.). Also, only a single table in the view definition can
be updated, so the `SET' clause must name only columns from one of the
tables in the view. Views that use *Note `UNION ALL': union. are not
permitted even though they might be theoretically updatable, because
the implementation uses temporary tables to process them.

For a multiple-table updatable view, *Note `INSERT': insert. can work
if it inserts into a single table. *Note `DELETE': delete. is not
supported.

*Note `INSERT DELAYED': insert-delayed. is not supported for views.

If a table contains an `AUTO_INCREMENT' column, inserting into an
insertable view on the table that does not include the `AUTO_INCREMENT'
column does not change the value of `LAST_INSERT_ID()', because the side
effects of inserting default values into columns not part of the view
should not be visible.

The `WITH CHECK OPTION' clause can be given for an updatable view to
prevent inserts or updates to rows except those for which the `WHERE'
clause in the SELECT_STATEMENT is true.

In a `WITH CHECK OPTION' clause for an updatable view, the `LOCAL' and
`CASCADED' keywords determine the scope of check testing when the view
is defined in terms of another view. The `LOCAL' keyword restricts the
`CHECK OPTION' only to the view being defined. `CASCADED' causes the
checks for underlying views to be evaluated as well. When neither
keyword is given, the default is `CASCADED'. Consider the definitions
for the following table and set of views:

     mysql> CREATE TABLE t1 (a INT);
     mysql> CREATE VIEW v1 AS SELECT * FROM t1 WHERE a < 2
         -> WITH CHECK OPTION;
     mysql> CREATE VIEW v2 AS SELECT * FROM v1 WHERE a > 0
         -> WITH LOCAL CHECK OPTION;
     mysql> CREATE VIEW v3 AS SELECT * FROM v1 WHERE a > 0
         -> WITH CASCADED CHECK OPTION;

Here the `v2' and `v3' views are defined in terms of another view, `v1'.
`v2' has a `LOCAL' check option, so inserts are tested only against the
`v2' check. `v3' has a `CASCADED' check option, so inserts are tested
not only against its own check, but against those of underlying views.
The following statements illustrate these differences:

     mysql> INSERT INTO v2 VALUES (2);
     Query OK, 1 row affected (0.00 sec)
     mysql> INSERT INTO v3 VALUES (2);
     ERROR 1369 (HY000): CHECK OPTION failed 'test.v3'

MySQL sets a flag, called the view updatability flag, at *Note `CREATE
VIEW': create-view. time. The flag is set to `YES' (true) if *Note
`UPDATE': update. and *Note `DELETE': delete. (and similar operations)
are legal for the view. Otherwise, the flag is set to `NO' (false). The
`IS_UPDATABLE' column in the *Note `INFORMATION_SCHEMA.VIEWS':
views-table. table displays the status of this flag. It means that the
server always knows whether a view is updatable. If the view is not
updatable, statements such *Note `UPDATE': update, *Note `DELETE':
delete, and *Note `INSERT': insert. are illegal and will be rejected.
(Note that even if a view is updatable, it might not be possible to
insert into it, as described elsewhere in this section.)

The updatability of views may be affected by the value of the
`updatable_views_with_limit' system variable. See *Note
server-system-variables::.


File: manual.info,  Node: view-metadata,  Prev: view-updatability,  Up: views

19.5.4 View Metadata
--------------------

Metadata about views can be obtained as follows:

   * Query the *Note `VIEWS': views-table. table of the
     `INFORMATION_SCHEMA' database. See *Note views-table::.

   * Use the *Note `SHOW CREATE VIEW': show-create-view.  statement.
     See *Note show-create-view::.


File: manual.info,  Node: stored-programs-security,  Next: stored-programs-logging,  Prev: views,  Up: stored-programs-views

19.6 Access Control for Stored Programs and Views
=================================================

Stored programs and views are defined prior to use and, when
referenced, execute within a security context that determines their
privileges. These privileges are controlled by their `DEFINER'
attribute, and, if there is one, their `SQL SECURITY' characteristic.

All stored programs (procedures, functions, triggers, and events) and
views can have a `DEFINER' attribute that names a MySQL account. If the
`DEFINER' attribute is omitted from a stored program or view
definition, the default account is the user who creates the object.

In addition, stored routines (procedures and functions) and views can
have a `SQL SECURITY' characteristic with a value of `DEFINER' or
`INVOKER' to specify whether the object executes in definer or invoker
context. If the `SQL SECURITY' characteristic is omitted, the default
is definer context.

Triggers and events have no `SQL SECURITY' characteristic and always
execute in definer context. The server invokes these objects
automatically as necessary, so there is no invoking user.

Definer and invoker security contexts differ as follows:

   * A stored program or view that executes in definer security context
     executes with the privileges of the account named by its `DEFINER'
     attribute. These privileges may be entirely different from those
     of the invoking user. The invoker must have appropriate privileges
     to reference the object (for example, `EXECUTE' to call a stored
     procedure or `SELECT' to select from a view), but when the object
     executes, the invoker's privileges are ignored and only the
     `DEFINER' account privileges matter. If this account has few
     privileges, the object is correspondingly limited in the
     operations it can perform. If the `DEFINER' account is highly
     privileged (such as a `root' account), the object can perform
     powerful operations _no matter who invokes it._

   * A stored routine or view that executes in invoker security context
     can perform only operations for which the invoker has privileges.
     The `DEFINER' attribute can be specified but has no effect for
     objects that execute in invoker context.

Consider the following stored procedure:

     CREATE DEFINER = 'admin'@'localhost' PROCEDURE p1()
     SQL SECURITY DEFINER
     BEGIN
       UPDATE t1 SET counter = counter + 1;
     END;

Any user who has the `EXECUTE' privilege for `p1' can invoke it with a
*Note `CALL': call. statement. However, when `p1' executes, it does so
in `DEFINER' security context and thus executes with the privileges of
`'admin'@'localhost'', the account named in the `DEFINER' attribute.
This account must have the `EXECUTE' privilege for `p1' as well as the
`UPDATE' privilege for the table `t1'. Otherwise, the procedure fails.

Now consider this stored procedure, which is identical to `p1' except
that its `SQL SECURITY' characteristic is `INVOKER':

     CREATE DEFINER = 'admin'@'localhost' PROCEDURE p2()
     SQL SECURITY INVOKER
     BEGIN
       UPDATE t1 SET counter = counter + 1;
     END;

`p2', unlike `p1', executes in `INVOKER' security context. The
`DEFINER' attribute is irrelevant and `p2' executes with the privileges
of the invoking user. `p2' fails if the invoker lacks the `EXECUTE'
privilege for `p2' or the `UPDATE' privilege for the table `t1'.

MySQL uses the following rules to control which accounts a user can
specify in an object `DEFINER' attribute:

   * You can specify a `DEFINER' value other than your own account only
     if you have the `SUPER' privilege.

   * If you do not have the `SUPER' privilege, the only legal user
     value is your own account, either specified literally or by using
     `CURRENT_USER'. You cannot set the definer to some other account.

To minimize the risk potential for stored program and view creation and
use, follow these guidelines:

   * For a stored routine or view, use `SQL SECURITY INVOKER' in the
     object definition when possible so that it can be used only by
     users with permissions appropriate for the operations performed by
     the object.

   * If you create definer-context stored programs or views while using
     an account that has the `SUPER' privilege, specify an explicit
     `DEFINER' attribute that names an account possessing only the
     privileges required for the operations performed by the object.
     Specify a highly privileged `DEFINER' account only when absolutely
     necessary.

   * Administrators can prevent users from specifying highly privileged
     `DEFINER' accounts by not granting them the `SUPER' privilege.

   * Definer-context objects should be written keeping in mind that
     they may be able to access data for which the invoking user has no
     privileges. In some cases, you can prevent reference to these
     objects by not granting unauthorized users particular privileges:

        * A stored procedure or function cannot be referenced by a user
          who does not have the `EXECUTE' privilege for it.

        * A view cannot be referenced by a user who does not have the
          appropriate privilege for it (`SELECT' to select from it,
          `INSERT' to insert into it, and so forth).

     However, no such control exists for triggers because users do not
     reference them directly. A trigger always executes in `DEFINER'
     context and is activated by access to the table with which it is
     associated, even ordinary table accesses by users with no special
     privileges. If the `DEFINER' account is highly privileged, the
     trigger can perform sensitive or dangerous operations. This
     remains true if the `SUPER' and `TRIGGER' privileges needed to
     create the trigger are revoked from the account of the user who
     created it. Administrators should be especially careful about
     granting users that combination of privileges.


File: manual.info,  Node: stored-programs-logging,  Prev: stored-programs-security,  Up: stored-programs-views

19.7 Binary Logging of Stored Programs
======================================

The binary log contains information about SQL statements that modify
database contents. This information is stored in the form of `events'
that describe the modifications. The binary log has two important
purposes:

   * For replication, the binary log is used on master replication
     servers as a record of the statements to be sent to slave servers.
     The master server sends the events contained in its binary log to
     its slaves, which execute those events to make the same data
     changes that were made on the master. See *Note
     replication-implementation::.

   * Certain data recovery operations require use of the binary log.
     After a backup file has been restored, the events in the binary
     log that were recorded after the backup was made are re-executed.
     These events bring databases up to date from the point of the
     backup. See *Note recovery-from-backups::.

However, there are certain binary logging issues that apply with
respect to stored programs (stored procedures and functions, triggers,
and events), if logging occurs at the statement level:

   * In some cases, it is possible that a statement will affect
     different sets of rows on a master and a slave.

   * Replicated statements executed on a slave are processed by the
     slave SQL thread, which has full privileges. It is possible for a
     procedure to follow different execution paths on master and slave
     servers, so a user can write a routine containing a dangerous
     statement that will execute only on the slave where it is
     processed by a thread that has full privileges.

   * If a stored program that modifies data is nondeterministic, it is
     not repeatable. This can result in different data on a master and
     slave, or cause restored data to differ from the original data.

This section describes how MySQL 5.5 handles binary logging for stored
programs. It states the current conditions that the implementation
places on the use of stored programs, and what you can do to avoid
problems. It also provides additional information about the reasons for
these conditions.

In general, the issues described here result when binary logging occurs
at the SQL statement level. If you use row-based binary logging, the
log contains changes made to individual rows as a result of executing
SQL statements. When routines or triggers execute, row changes are
logged, not the statements that make the changes. For stored
procedures, this means that the *Note `CALL': call. statement is not
logged. For stored functions, row changes made within the function are
logged, not the function invocation. For triggers, row changes made by
the trigger are logged. On the slave side, only the row changes are
seen, not the stored program invocation. For general information about
row-based logging, see *Note replication-formats::.

Unless noted otherwise, the remarks here assume that you have enabled
binary logging by starting the server with the `--log-bin' option. (See
*Note binary-log::.) If the binary log is not enabled, replication is
not possible, nor is the binary log available for data recovery.

The current conditions on the use of stored functions in MySQL 5.5 can
be summarized as follows. These conditions do not apply to stored
procedures or Event Scheduler events and they do not apply unless
binary logging is enabled.

   * To create or alter a stored function, you must have the `SUPER'
     privilege, in addition to the `CREATE ROUTINE' or `ALTER ROUTINE'
     privilege that is normally required. (Depending on the `DEFINER'
     value in the function definition, `SUPER' might be required
     regardless of whether binary logging is enabled. See *Note
     create-procedure::.)

   * When you create a stored function, you must declare either that it
     is deterministic or that it does not modify data.  Otherwise, it
     may be unsafe for data recovery or replication.

     By default, for a *Note `CREATE FUNCTION': create-function.
     statement to be accepted, at least one of `DETERMINISTIC', `NO
     SQL', or `READS SQL DATA' must be specified explicitly. Otherwise
     an error occurs:

          ERROR 1418 (HY000): This function has none of DETERMINISTIC, NO SQL,
          or READS SQL DATA in its declaration and binary logging is enabled
          (you *might* want to use the less safe log_bin_trust_function_creators
          variable)

     This function is deterministic (and does not modify data), so it
     is safe:

          CREATE FUNCTION f1(i INT)
          RETURNS INT
          DETERMINISTIC
          READS SQL DATA
          BEGIN
            RETURN i;
          END;

     This function uses `UUID()', which is not deterministic, so the
     function also is not deterministic and is not safe:

          CREATE FUNCTION f2()
          RETURNS CHAR(36) CHARACTER SET utf8
          BEGIN
            RETURN UUID();
          END;

     This function modifies data, so it may not be safe:

          CREATE FUNCTION f3(p_id INT)
          RETURNS INT
          BEGIN
            UPDATE t SET modtime = NOW() WHERE id = p_id;
            RETURN ROW_COUNT();
          END;

     Assessment of the nature of a function is based on the `honesty'
     of the creator: MySQL does not check that a function declared
     `DETERMINISTIC' is free of statements that produce
     nondeterministic results.

   * Although it is possible to create a deterministic stored function
     without specifying `DETERMINISTIC', you cannot execute this
     function using statement-based binary logging. To execute such a
     function, you must use row-based or mixed binary logging.
     Alternatively, if you explicitly specify `DETERMINISTIC' in the
     function definition, you can use any kind of logging, including
     statement-based logging.

   * To relax the preceding conditions on function creation (that you
     must have the `SUPER' privilege and that a function must be
     declared deterministic or to not modify data), set the global
     `log_bin_trust_function_creators' system variable to 1. By
     default, this variable has a value of 0, but you can change it
     like this:

          mysql> SET GLOBAL log_bin_trust_function_creators = 1;

     You can also set this variable by using the
     `--log-bin-trust-function-creators=1' option when starting the
     server.

     If binary logging is not enabled, `log_bin_trust_function_creators'
     does not apply. `SUPER' is not required for function creation
     unless, as described previously, the `DEFINER' value in the
     function definition requires it.

   * For information about built-in functions that may be unsafe for
     replication (and thus cause stored functions that use them to be
     unsafe as well), see *Note replication-features::.

Triggers are similar to stored functions, so the preceding remarks
regarding functions also apply to triggers with the following
exception: *Note `CREATE TRIGGER': create-trigger. does not have an
optional `DETERMINISTIC' characteristic, so triggers are assumed to be
always deterministic. However, this assumption might in some cases be
invalid. For example, the `UUID()' function is nondeterministic (and
does not replicate). You should be careful about using such functions
in triggers.

Triggers can update tables, so error messages similar to those for
stored functions occur with *Note `CREATE TRIGGER': create-trigger. if
you do not have the required privileges. On the slave side, the slave
uses the trigger `DEFINER' attribute to determine which user is
considered to be the creator of the trigger.

The rest of this section provides additional detail about the logging
implementation and its implications. You need not read it unless you
are interested in the background on the rationale for the current
logging-related conditions on stored routine use. This discussion
applies only for statement-based logging, and not for row-based
logging, with the exception of the first item: `CREATE' and `DROP'
statements are logged as statements regardless of the logging mode.

   * The server writes *Note `CREATE EVENT': create-event, *Note
     `CREATE PROCEDURE': create-procedure, *Note `CREATE FUNCTION':
     create-function, *Note `ALTER EVENT': alter-event, *Note `ALTER
     PROCEDURE': alter-procedure, *Note `ALTER FUNCTION':
     alter-function, *Note `DROP EVENT': drop-event, *Note `DROP
     PROCEDURE': drop-procedure, and *Note `DROP FUNCTION':
     drop-function. statements to the binary log.

   * A stored function invocation is logged as a *Note `SELECT':
     select. statement if the function changes data and occurs within a
     statement that would not otherwise be logged. This prevents
     nonreplication of data changes that result from use of stored
     functions in nonlogged statements. For example, *Note `SELECT':
     select.  statements are not written to the binary log, but a *Note
     `SELECT': select. might invoke a stored function that makes
     changes. To handle this, a `SELECT FUNC_NAME()' statement is
     written to the binary log when the given function makes a change.
     Suppose that the following statements are executed on the master:

          CREATE FUNCTION f1(a INT) RETURNS INT
          BEGIN
            IF (a < 3) THEN
              INSERT INTO t2 VALUES (a);
            END IF;
            RETURN 0;
          END;

          CREATE TABLE t1 (a INT);
          INSERT INTO t1 VALUES (1),(2),(3);

          SELECT f1(a) FROM t1;

     When the *Note `SELECT': select. statement executes, the function
     `f1()' is invoked three times. Two of those invocations insert a
     row, and MySQL logs a *Note `SELECT': select. statement for each
     of them. That is, MySQL writes the following statements to the
     binary log:

          SELECT f1(1);
          SELECT f1(2);

     The server also logs a *Note `SELECT': select.  statement for a
     stored function invocation when the function invokes a stored
     procedure that causes an error. In this case, the server writes
     the *Note `SELECT': select.  statement to the log along with the
     expected error code. On the slave, if the same error occurs, that
     is the expected result and replication continues. Otherwise,
     replication stops.

   * Logging stored function invocations rather than the statements
     executed by a function has a security implication for replication,
     which arises from two factors:

        * It is possible for a function to follow different execution
          paths on master and slave servers.

        * Statements executed on a slave are processed by the slave SQL
          thread which has full privileges.

     The implication is that although a user must have the `CREATE
     ROUTINE' privilege to create a function, the user can write a
     function containing a dangerous statement that will execute only
     on the slave where it is processed by a thread that has full
     privileges. For example, if the master and slave servers have
     server ID values of 1 and 2, respectively, a user on the master
     server could create and invoke an unsafe function `unsafe_func()'
     as follows:

          mysql> delimiter //
          mysql> CREATE FUNCTION unsafe_func () RETURNS INT
              -> BEGIN
              ->   IF @@server_id=2 THEN DANGEROUS_STATEMENT; END IF;
              ->   RETURN 1;
              -> END;
              -> //
          mysql> delimiter ;
          mysql> INSERT INTO t VALUES(unsafe_func());

     The *Note `CREATE FUNCTION': create-function. and *Note `INSERT':
     insert. statements are written to the binary log, so the slave
     will execute them. Because the slave SQL thread has full
     privileges, it will execute the dangerous statement. Thus, the
     function invocation has different effects on the master and slave
     and is not replication-safe.

     To guard against this danger for servers that have binary logging
     enabled, stored function creators must have the `SUPER' privilege,
     in addition to the usual `CREATE ROUTINE' privilege that is
     required. Similarly, to use *Note `ALTER FUNCTION':
     alter-function, you must have the `SUPER' privilege in addition to
     the `ALTER ROUTINE' privilege.  Without the `SUPER' privilege, an
     error will occur:

          ERROR 1419 (HY000): You do not have the SUPER privilege and
          binary logging is enabled (you *might* want to use the less safe
          log_bin_trust_function_creators variable)

     If you do not want to require function creators to have the
     `SUPER' privilege (for example, if all users with the `CREATE
     ROUTINE' privilege on your system are experienced application
     developers), set the global `log_bin_trust_function_creators'
     system variable to 1. You can also set this variable by using the
     `--log-bin-trust-function-creators=1' option when starting the
     server. If binary logging is not enabled,
     `log_bin_trust_function_creators' does not apply. `SUPER' is not
     required for function creation unless, as described previously,
     the `DEFINER' value in the function definition requires it.

   * If a function that performs updates is nondeterministic, it is not
     repeatable. This can have two undesirable effects:

        * It will make a slave different from the master.

        * Restored data will be different from the original data.

     To deal with these problems, MySQL enforces the following
     requirement: On a master server, creation and alteration of a
     function is refused unless you declare the function to be
     deterministic or to not modify data. Two sets of function
     characteristics apply here:

        * The `DETERMINISTIC' and `NOT DETERMINISTIC' characteristics
          indicate whether a function always produces the same result
          for given inputs.  The default is `NOT DETERMINISTIC' if
          neither characteristic is given. To declare that a function
          is deterministic, you must specify `DETERMINISTIC' explicitly.

        * The `CONTAINS SQL', `NO SQL', `READS SQL DATA', and `MODIFIES
          SQL DATA' characteristics provide information about whether
          the function reads or writes data. Either `NO SQL' or `READS
          SQL DATA' indicates that a function does not change data, but
          you must specify one of these explicitly because the default
          is `CONTAINS SQL' if no characteristic is given.

     By default, for a *Note `CREATE FUNCTION': create-function.
     statement to be accepted, at least one of `DETERMINISTIC', `NO
     SQL', or `READS SQL DATA' must be specified explicitly. Otherwise
     an error occurs:

          ERROR 1418 (HY000): This function has none of DETERMINISTIC, NO SQL,
          or READS SQL DATA in its declaration and binary logging is enabled
          (you *might* want to use the less safe log_bin_trust_function_creators
          variable)

     If you set `log_bin_trust_function_creators' to 1, the requirement
     that functions be deterministic or not modify data is dropped.

   * Stored procedure calls are logged at the statement level rather
     than at the *Note `CALL': call. level.  That is, the server does
     not log the *Note `CALL': call. statement, it logs those
     statements within the procedure that actually execute. As a
     result, the same changes that occur on the master will be observed
     on slave servers. This prevents problems that could result from a
     procedure having different execution paths on different machines.

     In general, statements executed within a stored procedure are
     written to the binary log using the same rules that would apply
     were the statements to be executed in standalone fashion. Some
     special care is taken when logging procedure statements because
     statement execution within procedures is not quite the same as in
     nonprocedure context:

        * A statement to be logged might contain references to local
          procedure variables. These variables do not exist outside of
          stored procedure context, so a statement that refers to such
          a variable cannot be logged literally. Instead, each
          reference to a local variable is replaced by this construct
          for logging purposes:

               NAME_CONST(VAR_NAME, VAR_VALUE)

          VAR_NAME is the local variable name, and VAR_VALUE is a
          constant indicating the value that the variable has at the
          time the statement is logged.  `NAME_CONST()' has a value of
          VAR_VALUE, and a `name' of VAR_NAME. Thus, if you invoke this
          function directly, you get a result like this:

               mysql> SELECT NAME_CONST('myname', 14);
               +--------+
               | myname |
               +--------+
               |     14 |
               +--------+

          `NAME_CONST()' enables a logged standalone statement to be
          executed on a slave with the same effect as the original
          statement that was executed on the master within a stored
          procedure.

          The use of `NAME_CONST()' can result in a problem for *Note
          `CREATE TABLE ... SELECT': create-table. statements when the
          source column expressions refer to local variables.
          Converting these references to `NAME_CONST()' expressions can
          result in column names that are different on the master and
          slave servers, or names that are too long to be legal column
          identifiers. A workaround is to supply aliases for columns
          that refer to local variables.  Consider this statement when
          `myvar' has a value of 1:

               CREATE TABLE t1 SELECT myvar;

          That will be rewritten as follows:

               CREATE TABLE t1 SELECT NAME_CONST(myvar, 1);

          To ensure that the master and slave tables have the same
          column names, write the statement like this:

               CREATE TABLE t1 SELECT myvar AS myvar;

          The rewritten statement becomes:

               CREATE TABLE t1 SELECT NAME_CONST(myvar, 1) AS myvar;

        * A statement to be logged might contain references to
          user-defined variables. To handle this, MySQL writes a *Note
          `SET': set-statement.  statement to the binary log to make
          sure that the variable exists on the slave with the same
          value as on the master.  For example, if a statement refers
          to a variable `@my_var', that statement will be preceded in
          the binary log by the following statement, where VALUE is the
          value of `@my_var' on the master:

               SET @my_var = VALUE;

        * Procedure calls can occur within a committed or rolled-back
          transaction. Transactional context is accounted for so that
          the transactional aspects of procedure execution are
          replicated correctly. That is, the server logs those
          statements within the procedure that actually execute and
          modify data, and also logs *Note `BEGIN': commit, *Note
          `COMMIT': commit, and *Note `ROLLBACK': commit.  statements
          as necessary. For example, if a procedure updates only
          transactional tables and is executed within a transaction
          that is rolled back, those updates are not logged. If the
          procedure occurs within a committed transaction, *Note
          `BEGIN': commit.  and *Note `COMMIT': commit. statements are
          logged with the updates. For a procedure that executes within
          a rolled-back transaction, its statements are logged using
          the same rules that would apply if the statements were
          executed in standalone fashion:

             * Updates to transactional tables are not logged.

             * Updates to nontransactional tables are logged because
               rollback does not cancel them.

             * Updates to a mix of transactional and nontransactional
               tables are logged surrounded by *Note `BEGIN': commit.
               and *Note `ROLLBACK': commit.  so that slaves will make
               the same changes and rollbacks as on the master.

   * A stored procedure call is _not_ written to the binary log at the
     statement level if the procedure is invoked from within a stored
     function. In that case, the only thing logged is the statement
     that invokes the function (if it occurs within a statement that is
     logged) or a *Note `DO': do. statement (if it occurs within a
     statement that is not logged). For this reason, care should be
     exercised in the use of stored functions that invoke a procedure,
     even if the procedure is otherwise safe in itself.


File: manual.info,  Node: information-schema,  Next: performance-schema,  Prev: stored-programs-views,  Up: Top

20 `INFORMATION_SCHEMA' Tables
******************************

* Menu:

* character-sets-table::         The `INFORMATION_SCHEMA CHARACTER_SETS' Table
* collations-table::             The `INFORMATION_SCHEMA COLLATIONS' Table
* collation-character-set-applicability-table::  The `INFORMATION_SCHEMA COLLATION_CHARACTER_SET_APPLICABILITY' Table
* columns-table::                The `INFORMATION_SCHEMA COLUMNS' Table
* column-privileges-table::      The `INFORMATION_SCHEMA COLUMN_PRIVILEGES' Table
* engines-table::                The `INFORMATION_SCHEMA ENGINES' Table
* events-table::                 The `INFORMATION_SCHEMA EVENTS' Table
* status-table::                 The `INFORMATION_SCHEMA GLOBAL_STATUS' and `SESSION_STATUS' Tables
* variables-table::              The `INFORMATION_SCHEMA GLOBAL_VARIABLES' and `SESSION_VARIABLES' Tables
* key-column-usage-table::       The `INFORMATION_SCHEMA KEY_COLUMN_USAGE' Table
* parameters-table::             The `INFORMATION_SCHEMA PARAMETERS' Table
* partitions-table::             The `INFORMATION_SCHEMA PARTITIONS' Table
* plugins-table::                The `INFORMATION_SCHEMA PLUGINS' Table
* processlist-table::            The `INFORMATION_SCHEMA PROCESSLIST' Table
* profiling-table::              The `INFORMATION_SCHEMA PROFILING' Table
* referential-constraints-table::  The `INFORMATION_SCHEMA REFERENTIAL_CONSTRAINTS' Table
* routines-table::               The `INFORMATION_SCHEMA ROUTINES' Table
* schemata-table::               The `INFORMATION_SCHEMA SCHEMATA' Table
* schema-privileges-table::      The `INFORMATION_SCHEMA SCHEMA_PRIVILEGES' Table
* statistics-table::             The `INFORMATION_SCHEMA STATISTICS' Table
* tables-table::                 The `INFORMATION_SCHEMA TABLES' Table
* tablespaces-table::            The `INFORMATION_SCHEMA TABLESPACES' Table
* table-constraints-table::      The `INFORMATION_SCHEMA TABLE_CONSTRAINTS' Table
* table-privileges-table::       The `INFORMATION_SCHEMA TABLE_PRIVILEGES' Table
* triggers-table::               The `INFORMATION_SCHEMA TRIGGERS' Table
* user-privileges-table::        The `INFORMATION_SCHEMA USER_PRIVILEGES' Table
* views-table::                  The `INFORMATION_SCHEMA VIEWS' Table
* innodb-i_s-tables::            `INFORMATION_SCHEMA' Tables for `InnoDB'
* mysql-cluster-i_s-tables::     `INFORMATION_SCHEMA' Tables for MySQL Cluster
* thread-pool-i_s-tables::       Thread Pool `INFORMATION_SCHEMA' Tables
* extended-show::                Extensions to `SHOW' Statements

`INFORMATION_SCHEMA' provides access to database _metadata_,
information about the MySQL server such as the name of a database or
table, the data type of a column, or access privileges. Other terms
that are sometimes used for this information are _data dictionary_ and
_system catalog_.

* Usage Notes for the `INFORMATION_SCHEMA' Database *

`INFORMATION_SCHEMA' is a database within each MySQL instance, the
place that stores information about all the other databases that the
MySQL server maintains. The `INFORMATION_SCHEMA' database contains
several read-only tables. They are actually views, not base tables, so
there are no files associated with them, and you cannot set triggers on
them. Also, there is no database directory with that name.

Although you can select `INFORMATION_SCHEMA' as the default database
with a *Note `USE': use.  statement, you can only read the contents of
tables, not perform *Note `INSERT': insert, *Note `UPDATE': update, or
*Note `DELETE': delete. operations on them.

* Example *

Here is an example of a statement that retrieves information from
`INFORMATION_SCHEMA':

     mysql> SELECT table_name, table_type, engine
         -> FROM information_schema.tables
         -> WHERE table_schema = 'db5'
         -> ORDER BY table_name;
     +------------+------------+--------+
     | table_name | table_type | engine |
     +------------+------------+--------+
     | fk         | BASE TABLE | InnoDB |
     | fk2        | BASE TABLE | InnoDB |
     | goto       | BASE TABLE | MyISAM |
     | into       | BASE TABLE | MyISAM |
     | k          | BASE TABLE | MyISAM |
     | kurs       | BASE TABLE | MyISAM |
     | loop       | BASE TABLE | MyISAM |
     | pk         | BASE TABLE | InnoDB |
     | t          | BASE TABLE | MyISAM |
     | t2         | BASE TABLE | MyISAM |
     | t3         | BASE TABLE | MyISAM |
     | t7         | BASE TABLE | MyISAM |
     | tables     | BASE TABLE | MyISAM |
     | v          | VIEW       | NULL   |
     | v2         | VIEW       | NULL   |
     | v3         | VIEW       | NULL   |
     | v56        | VIEW       | NULL   |
     +------------+------------+--------+
     17 rows in set (0.01 sec)

Explanation: The statement requests a list of all the tables in
database `db5', showing just three pieces of information: the name of
the table, its type, and its storage engine.

The definition for character columns (for example, `TABLES.TABLE_NAME')
is generally `VARCHAR(N) CHARACTER SET utf8' where N is at least 64.
MySQL uses the default collation for this character set
(`utf8_general_ci') for all searches, sorts, comparisons, and other
string operations on such columns. However, searches in
`INFORMATION_SCHEMA' string columns are also affected by file system
case sensitivity. For more information, see *Note
charset-collation-information-schema::.

Each MySQL user has the right to access these tables, but can see only
the rows in the tables that correspond to objects for which the user
has the proper access privileges. In some cases (for example, the
`ROUTINE_DEFINITION' column in the *Note `INFORMATION_SCHEMA.ROUTINES':
routines-table. table), users who have insufficient privileges will see
`NULL'.

* Character Set Considerations *

The definition for character columns (for example, `TABLES.TABLE_NAME')
is generally `VARCHAR(N) CHARACTER SET utf8' where N is at least 64.
MySQL uses the default collation for this character set
(`utf8_general_ci') for all searches, sorts, comparisons, and other
string operations on such columns.

Because some MySQL objects are represented as files, searches in
`INFORMATION_SCHEMA' string columns can be affected by file system case
sensitivity. For more information, see *Note
charset-collation-information-schema::.

* `INFORMATION_SCHEMA' as Alternative to `SHOW' Statements *

The `SELECT ... FROM INFORMATION_SCHEMA' statement is intended as a
more consistent way to provide access to the information provided by
the various *Note `SHOW': show. statements that MySQL supports (*Note
`SHOW DATABASES': show-databases, *Note `SHOW TABLES': show-tables, and
so forth). Using *Note `SELECT': select. has these advantages, compared
to *Note `SHOW': show.:

   * It conforms to Codd's rules, because all access is done on tables.

   * You can use the familiar syntax of the *Note `SELECT': select.
     statement, and only need to learn some table and column names.

   * The implementor need not worry about adding keywords.

   * You can filter, sort, concatenate, and transform the results from
     `INFORMATION_SCHEMA' queries into whatever format your application
     needs, such as a data structure or a text representation to parse.

   * This technique is more interoperable with other database systems.
     For example, Oracle Database users are familiar with querying
     tables in the Oracle data dictionary.

Because *Note `SHOW': show. is familiar and widely used, the *Note
`SHOW': show. statements remain as an alternative. In fact, along with
the implementation of `INFORMATION_SCHEMA', there are enhancements to
*Note `SHOW': show. as described in *Note extended-show::.

* Privileges *

Each MySQL user has the right to access these tables, but can see only
the rows in the tables that correspond to objects for which the user
has the proper access privileges. In some cases (for example, the
`ROUTINE_DEFINITION' column in the *Note `INFORMATION_SCHEMA.ROUTINES':
routines-table. table), users who have insufficient privileges see
`NULL'.  These restrictions do not apply for *Note `InnoDB':
innodb-storage-engine. tables; you can see them with only the `PROCESS'
privilege.

The same privileges apply to selecting information from
`INFORMATION_SCHEMA' and viewing the same information through *Note
`SHOW': show. statements.  In either case, you must have some privilege
on an object to see information about it.

* Performance Considerations *

`INFORMATION_SCHEMA' queries that search for information from more than
one database might take a long time and impact performance. To check
the efficiency of a query, you can use *Note `EXPLAIN': explain. For
information about using *Note `EXPLAIN': explain. output to tune
`INFORMATION_SCHEMA' queries, see *Note
information-schema-optimization::.

* Standards Considerations *

The implementation for the `INFORMATION_SCHEMA' table structures in
MySQL follows the ANSI/ISO SQL:2003 standard Part 11 `Schemata'. Our
intent is approximate compliance with SQL:2003 core feature F021 `Basic
information schema'.

Users of SQL Server 2000 (which also follows the standard) may notice a
strong similarity. However, MySQL has omitted many columns that are not
relevant for our implementation, and added columns that are
MySQL-specific. One such column is the `ENGINE' column in the *Note
`INFORMATION_SCHEMA.TABLES': tables-table.  table.

Although other DBMSs use a variety of names, like `syscat' or `system',
the standard name is `INFORMATION_SCHEMA'.

To avoid using any name that is reserved in the standard or in DB2, SQL
Server, or Oracle, we changed the names of some columns marked `MySQL
extension'. (For example, we changed `COLLATION' to `TABLE_COLLATION'
in the *Note `TABLES': tables-table. table.) See the list of reserved
words near the end of this article:
`http://web.archive.org/web/20070409075643rn_1/www.dbazine.com/db2/db2-disarticles/gulutzan5'.

* Conventions in the `INFORMATION_SCHEMA' Reference Sections *

The following sections describe each of the tables and columns in
`INFORMATION_SCHEMA'. For each column, there are three pieces of
information:

   * ``INFORMATION_SCHEMA' Name' indicates the name for the column in
     the `INFORMATION_SCHEMA' table. This corresponds to the standard
     SQL name unless the `Remarks' field says `MySQL extension.'

   * `*Note `SHOW': show. Name' indicates the equivalent field name in
     the closest *Note `SHOW': show. statement, if there is one.

   * `Remarks' provides additional information where applicable. If
     this field is `NULL', it means that the value of the column is
     always `NULL'.  If this field says `MySQL extension,' the column is
     a MySQL extension to standard SQL.

Many sections indicate what *Note `SHOW': show.  statement is
equivalent to a *Note `SELECT': select.  that retrieves information from
`INFORMATION_SCHEMA'. For *Note `SHOW': show. statements that display
information for the default database if you omit a `FROM DB_NAME'
clause, you can often select information for the default database by
adding an `AND TABLE_SCHEMA = SCHEMA()' condition to the `WHERE' clause
of a query that retrieves information from an `INFORMATION_SCHEMA'
table.

For information about `INFORMATION_SCHEMA' tables specific to the *Note
`InnoDB': innodb-storage-engine. storage engine, see *Note
innodb-i_s-tables::. For information about `INFORMATION_SCHEMA' tables
specific to the *Note `NDB': mysql-cluster. storage engine (MySQL
Cluster), see *Note mysql-cluster-i_s-tables::. For information about
`INFORMATION_SCHEMA' tables specific to the thread pool plugin, see
*Note thread-pool-i_s-tables::.

For answers to questions that are often asked concerning the
`INFORMATION_SCHEMA' database, see *Note faqs-information-schema::.


File: manual.info,  Node: character-sets-table,  Next: collations-table,  Prev: information-schema,  Up: information-schema

20.1 The `INFORMATION_SCHEMA CHARACTER_SETS' Table
==================================================

The *Note `CHARACTER_SETS': character-sets-table. table provides
information about available character sets.

This table describes the `INFORMATION_SCHEMA' *Note `CHARACTER_SETS':
character-sets-table. table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`CHARACTER_SET_NAME'          `Charset'              
`DEFAULT_COLLATE_NAME'        `Default collation'    
`DESCRIPTION'                 `Description'          MySQL extension
`MAXLEN'                      `Maxlen'               MySQL extension

The following statements are equivalent:

     SELECT * FROM INFORMATION_SCHEMA.CHARACTER_SETS
       [WHERE CHARACTER_SET_NAME LIKE 'WILD']

     SHOW CHARACTER SET
       [LIKE 'WILD']


File: manual.info,  Node: collations-table,  Next: collation-character-set-applicability-table,  Prev: character-sets-table,  Up: information-schema

20.2 The `INFORMATION_SCHEMA COLLATIONS' Table
==============================================

The *Note `COLLATIONS': collations-table. table provides information
about collations for each character set.

This table describes the `INFORMATION_SCHEMA' *Note `COLLATIONS':
collations-table. table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`COLLATION_NAME'              `Collation'            
`CHARACTER_SET_NAME'          `Charset'              MySQL extension
`ID'                          `Id'                   MySQL extension
`IS_DEFAULT'                  `Default'              MySQL extension
`IS_COMPILED'                 `Compiled'             MySQL extension
`SORTLEN'                     `Sortlen'              MySQL extension

   * `COLLATION_NAME' is the collation name.

   * `CHARACTER_SET_NAME' is the name of the character set with which
     the collation is associated.

   * `ID' is the collation ID.

   * `IS_DEFAULT' indicates whether the collation is the default for
     its character set.

   * `IS_COMPILED' indicates whether the character set is compiled into
     the server.

   * `SORTLEN' is related to the amount of memory required to sort
     strings expressed in the character set.

Collation information is also available from the *Note `SHOW
COLLATION': show-collation. statement. The following statements are
equivalent:

     SELECT COLLATION_NAME FROM INFORMATION_SCHEMA.COLLATIONS
       [WHERE COLLATION_NAME LIKE 'WILD']

     SHOW COLLATION
       [LIKE 'WILD']


File: manual.info,  Node: collation-character-set-applicability-table,  Next: columns-table,  Prev: collations-table,  Up: information-schema

20.3 The `INFORMATION_SCHEMA COLLATION_CHARACTER_SET_APPLICABILITY' Table
=========================================================================

The *Note `COLLATION_CHARACTER_SET_APPLICABILITY':
collation-character-set-applicability-table.  table indicates what
character set is applicable for what collation. The columns are
equivalent to the first two display fields that we get from *Note `SHOW
COLLATION': show-collation.

This table describes the `INFORMATION_SCHEMA
COLLATION_CHARACTER_SET_APPLICABILITY' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`COLLATION_NAME'              `Collation'            
`CHARACTER_SET_NAME'          `Charset'              


File: manual.info,  Node: columns-table,  Next: column-privileges-table,  Prev: collation-character-set-applicability-table,  Up: information-schema

20.4 The `INFORMATION_SCHEMA COLUMNS' Table
===========================================

The *Note `COLUMNS': columns-table. table provides information about
columns in tables.

This table describes the `INFORMATION_SCHEMA COLUMNS' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`TABLE_CATALOG'                                      `def'
`TABLE_SCHEMA'                                       
`TABLE_NAME'                                         
`COLUMN_NAME'                 `Field'                
`ORDINAL_POSITION'                                   see notes
`COLUMN_DEFAULT'              `Default'              
`IS_NULLABLE'                 `Null'                 
`DATA_TYPE'                   `Type'                 
`CHARACTER_MAXIMUM_LENGTH'    `Type'                 
`CHARACTER_OCTET_LENGTH'                             
`NUMERIC_PRECISION'           `Type'                 
`NUMERIC_SCALE'               `Type'                 
`CHARACTER_SET_NAME'                                 
`COLLATION_NAME'              `Collation'            
`COLUMN_TYPE'                 `Type'                 MySQL extension
`COLUMN_KEY'                  `Key'                  MySQL extension
`EXTRA'                       `Extra'                MySQL extension
`PRIVILEGES'                  `Privileges'           MySQL extension
`COLUMN_COMMENT'              `Comment'              MySQL extension

*Notes*:

   * In *Note `SHOW': show, the `Type' display includes values from
     several different *Note `COLUMNS': columns-table. columns.

   * `ORDINAL_POSITION' is necessary because you might want to say
     `ORDER BY ORDINAL_POSITION'. Unlike *Note `SHOW': show, *Note
     `SELECT': select. does not have automatic ordering.

   * `CHARACTER_OCTET_LENGTH' should be the same as
     `CHARACTER_MAXIMUM_LENGTH', except for multi-byte character sets.

   * `CHARACTER_SET_NAME' can be derived from `Collation'. For example,
     if you say `SHOW FULL COLUMNS FROM t', and you see in the
     `Collation' column a value of `latin1_swedish_ci', the character
     set is what is before the first underscore: `latin1'.

The following statements are nearly equivalent:

     SELECT COLUMN_NAME, DATA_TYPE, IS_NULLABLE, COLUMN_DEFAULT
       FROM INFORMATION_SCHEMA.COLUMNS
       WHERE table_name = 'TBL_NAME'
       [AND table_schema = 'DB_NAME']
       [AND column_name LIKE 'WILD']

     SHOW COLUMNS
       FROM TBL_NAME
       [FROM DB_NAME]
       [LIKE 'WILD']


File: manual.info,  Node: column-privileges-table,  Next: engines-table,  Prev: columns-table,  Up: information-schema

20.5 The `INFORMATION_SCHEMA COLUMN_PRIVILEGES' Table
=====================================================

The *Note `COLUMN_PRIVILEGES': column-privileges-table. table provides
information about column privileges. This information comes from the
`mysql.columns_priv' grant table.

This table describes the `INFORMATION_SCHEMA COLUMN_PRIVILEGES' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`GRANTEE'                                            `'USER_NAME'@'HOST_NAME''
                                                     value
`TABLE_CATALOG'                                      `def'
`TABLE_SCHEMA'                                       
`TABLE_NAME'                                         
`COLUMN_NAME'                                        
`PRIVILEGE_TYPE'                                     
`IS_GRANTABLE'                                       

*Notes*:

   * In the output from *Note `SHOW FULL COLUMNS': show-columns, the
     privileges are all in one field and in lowercase, for example,
     `select,insert,update,references'. In *Note `COLUMN_PRIVILEGES':
     column-privileges-table, there is one privilege per row, in
     uppercase.

   * `PRIVILEGE_TYPE' can contain one (and only one) of these values:
     `SELECT', `INSERT', `UPDATE', `REFERENCES'.

   * If the user has `GRANT OPTION' privilege, `IS_GRANTABLE' should be
     `YES'. Otherwise, `IS_GRANTABLE' should be `NO'. The output does
     not list `GRANT OPTION' as a separate privilege.

The following statements are _not_ equivalent:

     SELECT ... FROM INFORMATION_SCHEMA.COLUMN_PRIVILEGES

     SHOW GRANTS ...


File: manual.info,  Node: engines-table,  Next: events-table,  Prev: column-privileges-table,  Up: information-schema

20.6 The `INFORMATION_SCHEMA ENGINES' Table
===========================================

The *Note `ENGINES': engines-table. table provides information about
storage engines.

This table describes the `INFORMATION_SCHEMA ENGINES' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`ENGINE'                      `Engine'               MySQL extension
`SUPPORT'                     `Support'              MySQL extension
`COMMENT'                     `Comment'              MySQL extension
`TRANSACTIONS'                `Transactions'         MySQL extension
`XA'                          `XA'                   MySQL extension
`SAVEPOINTS'                  `Savepoints'           MySQL extension

*Notes*:

   * The *Note `ENGINES': engines-table. table is a nonstandard table.

See also *Note show-engines::.


File: manual.info,  Node: events-table,  Next: status-table,  Prev: engines-table,  Up: information-schema

20.7 The `INFORMATION_SCHEMA EVENTS' Table
==========================================

The *Note `EVENTS': events-table. table provides information about
scheduled events, which are discussed in *Note events::. The `SHOW
Name' values correspond to column names of the *Note `SHOW EVENTS':
show-events. statement.

This table describes the `INFORMATION_SCHEMA EVENTS' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`EVENT_CATALOG'                                      `def', MySQL extension
`EVENT_SCHEMA'                `Db'                   MySQL extension
`EVENT_NAME'                  `Name'                 MySQL extension
`DEFINER'                     `Definer'              MySQL extension
`TIME_ZONE'                   `Time zone'            MySQL extension
`EVENT_BODY'                                         MySQL extension
`EVENT_DEFINITION'                                   MySQL extension
`EVENT_TYPE'                  `Type'                 MySQL extension
`EXECUTE_AT'                  `Execute at'           MySQL extension
`INTERVAL_VALUE'              `Interval value'       MySQL extension
`INTERVAL_FIELD'              `Interval field'       MySQL extension
`SQL_MODE'                                           MySQL extension
`STARTS'                      `Starts'               MySQL extension
`ENDS'                        `Ends'                 MySQL extension
`STATUS'                      `Status'               MySQL extension
`ON_COMPLETION'                                      MySQL extension
`CREATED'                                            MySQL extension
`LAST_ALTERED'                                       MySQL extension
`LAST_EXECUTED'                                      MySQL extension
`EVENT_COMMENT'                                      MySQL extension
`ORIGINATOR'                  `Originator'           MySQL extension
`CHARACTER_SET_CLIENT'        `character_set_client' MySQL extension
`COLLATION_CONNECTION'        `collation_connection' MySQL extension
`DATABASE_COLLATION'          `Database Collation'   MySQL extension

*Notes*:

   * The *Note `EVENTS': events-table. table is a nonstandard table.

   * `EVENT_CATALOG': The value of this column is always `def'.

   * `EVENT_SCHEMA': The name of the schema (database) to which this
     event belongs.

   * `EVENT_NAME': The name of the event.

   * `DEFINER': The account of the user who created the event, in
     `'USER_NAME'@'HOST_NAME'' format.

   * `TIME_ZONE': The event time zone, which is the time zone used for
     scheduling the event and that is in effect within the event as it
     executes. The default value is `SYSTEM'.

   * `EVENT_BODY': The language used for the statements in the event's
     *Note `DO': do.  clause; in MySQL 5.5, this is always `SQL'.

     This column is not to be confused with the column of the same name
     (now named `EVENT_DEFINITION') that existed in earlier MySQL
     versions.

   * `EVENT_DEFINITION': The text of the SQL statement making up the
     event's *Note `DO': do. clause; in other words, the statement
     executed by this event.

   * `EVENT_TYPE': The event repetition type, either `ONE TIME'
     (transient) or `RECURRING' (repeating).

   * `EXECUTE_AT': For a one-time event, this is the *Note `DATETIME':
     datetime. value specified in the `AT' clause of the *Note `CREATE
     EVENT': create-event. statement used to create the event, or of
     the last *Note `ALTER EVENT': alter-event. statement that modified
     the event. The value shown in this column reflects the addition or
     subtraction of any `INTERVAL' value included in the event's `AT'
     clause. For example, if an event is created using `ON SCHEDULE AT
     CURRENT_TIMESTAMP + '1:6' DAY_HOUR', and the event was created at
     2006-02-09 14:05:30, the value shown in this column would be
     `'2006-02-10 20:05:30''.

     If the event's timing is determined by an `EVERY' clause instead
     of an `AT' clause (that is, if the event is recurring), the value
     of this column is `NULL'.

   * `INTERVAL_VALUE': For recurring events, this column contains the
     numeric portion of the event's `EVERY' clause.

     For a one-time event (that is, an event whose timing is determined
     by an `AT' clause), this column is `NULL'.

   * `INTERVAL_FIELD': For recurring events, this column contains the
     units portion of the `EVERY' clause governing the timing of the
     event. Thus, this column contains a value such as '*Note `YEAR':
     year.', '`QUARTER'', '`DAY'', and so on.

     For a one-time event (that is, an event whose timing is determined
     by an `AT' clause), this column is `NULL'.

   * `SQL_MODE': The SQL mode in effect when the event was created or
     altered, and under which the event executes. For the permitted
     values, see *Note server-sql-mode::.

   * `STARTS': For a recurring event whose definition includes a
     `STARTS' clause, this column contains the corresponding *Note
     `DATETIME': datetime. value. As with the `EXECUTE_AT' column, this
     value resolves any expressions used.

     If there is no `STARTS' clause affecting the timing of the event,
     this column is `NULL'

   * `ENDS': For a recurring event whose definition includes a `ENDS'
     clause, this column contains the corresponding *Note `DATETIME':
     datetime. value. As with the `EXECUTE_AT' column, this value
     resolves any expressions used.

     If there is no `ENDS' clause affecting the timing of the event,
     this column is `NULL'.

   * `STATUS': One of the three values `ENABLED', `DISABLED', or
     `SLAVESIDE_DISABLED'.

     `SLAVESIDE_DISABLED' indicates that the creation of the event
     occurred on another MySQL server acting as a replication master
     and was replicated to the current MySQL server which is acting as
     a slave, but the event is not presently being executed on the
     slave. See *Note replication-features-invoked::, for more
     information.

   * `ON_COMPLETION': One of the two values `PRESERVE' or `NOT
     PRESERVE'.

   * `CREATED': The date and time when the event was created. This is a
     *Note `TIMESTAMP': datetime. value.

   * `LAST_ALTERED': The date and time when the event was last
     modified. This is a *Note `TIMESTAMP': datetime. value. If the
     event has not been modified since its creation, this column holds
     the same value as the `CREATED' column.

   * `LAST_EXECUTED': The date and time when the event last executed. A
     *Note `DATETIME': datetime.  value. If the event has never
     executed, this column is `NULL'.

     `LAST_EXECUTED' indicates when the event started. As a result, the
     `ENDS' column is never less than `LAST_EXECUTED'.

   * `EVENT_COMMENT': The text of a comment, if the event has one. If
     not, the value of this column is an empty string.

   * `ORIGINATOR': The server ID of the MySQL server on which the event
     was created; used in replication.  The default value is 0.

   * `CHARACTER_SET_CLIENT': The session value of the
     `character_set_client' system variable when the event was created.

   * `COLLATION_CONNECTION': The session value of the
     `collation_connection' system variable when the event was created.

   * `DATABASE_COLLATION': The collation of the database with which the
     event is associated.

*Example*: Suppose that the user `jon@ghidora' creates an event named
`e_daily', and then modifies it a few minutes later using an *Note
`ALTER EVENT': alter-event.  statement, as shown here:

     DELIMITER |

     CREATE EVENT e_daily
         ON SCHEDULE
           EVERY 1 DAY
         COMMENT 'Saves total number of sessions then clears the table each day'
         DO
           BEGIN
             INSERT INTO site_activity.totals (time, total)
               SELECT CURRENT_TIMESTAMP, COUNT(*)
                 FROM site_activity.sessions;
             DELETE FROM site_activity.sessions;
           END |

     DELIMITER ;

     ALTER EVENT e_daily
         ENABLED;

(Note that comments can span multiple lines.)

This user can then run the following *Note `SELECT': select. statement,
and obtain the output shown:

     mysql> SELECT * FROM INFORMATION_SCHEMA.EVENTS
          > WHERE EVENT_NAME = 'e_daily'
          > AND EVENT_SCHEMA = 'myschema'\G
     *************************** 1. row ***************************
            EVENT_CATALOG: def
             EVENT_SCHEMA: test
               EVENT_NAME: e_daily
                  DEFINER: me@localhost
                TIME_ZONE: SYSTEM
               EVENT_BODY: SQL
         EVENT_DEFINITION: BEGIN
             INSERT INTO site_activity.totals (time, total)
               SELECT CURRENT_TIMESTAMP, COUNT(*)
                 FROM site_activity.sessions;
             DELETE FROM site_activity.sessions;
           END
               EVENT_TYPE: RECURRING
               EXECUTE_AT: NULL
           INTERVAL_VALUE: 1
           INTERVAL_FIELD: DAY
                 SQL_MODE:
                   STARTS: 2008-09-03 12:13:39
                     ENDS: NULL
                   STATUS: ENABLED
            ON_COMPLETION: NOT PRESERVE
                  CREATED: 2008-09-03 12:13:39
             LAST_ALTERED: 2008-09-03 12:13:39
            LAST_EXECUTED: NULL
            EVENT_COMMENT: Saves total number of sessions then clears the
                           table each day
               ORIGINATOR: 1
     CHARACTER_SET_CLIENT: latin1
     COLLATION_CONNECTION: latin1_swedish_ci
       DATABASE_COLLATION: latin1_swedish_ci

Times in the *Note `EVENTS': events-table. table are displayed using
the event time zone or the current session time zone, as described in
*Note events-metadata::.

See also *Note show-events::.


File: manual.info,  Node: status-table,  Next: variables-table,  Prev: events-table,  Up: information-schema

20.8 The `INFORMATION_SCHEMA GLOBAL_STATUS' and `SESSION_STATUS' Tables
=======================================================================

The *Note `GLOBAL_STATUS': status-table.  and *Note `SESSION_STATUS':
status-table.  tables provide information about server status
variables. Their contents correspond to the information produced by the
*Note `SHOW GLOBAL STATUS': show-status. and *Note `SHOW SESSION
STATUS': show-status. statements (see *Note show-status::).

This table describes the *Note `INFORMATION_SCHEMA GLOBAL_STATUS':
status-table. and *Note `SESSION_STATUS': status-table.  tables.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
VARIABLE_NAME                 Variable_name          
VARIABLE_VALUE                Value                  

*Notes*:

   * The `VARIABLE_VALUE' column for each of these tables is defined as
     `VARCHAR(20480)'.


File: manual.info,  Node: variables-table,  Next: key-column-usage-table,  Prev: status-table,  Up: information-schema

20.9 The `INFORMATION_SCHEMA GLOBAL_VARIABLES' and `SESSION_VARIABLES' Tables
=============================================================================

The *Note `GLOBAL_VARIABLES': variables-table.  and *Note
`SESSION_VARIABLES': variables-table.  tables provide information about
server status variables. Their contents correspond to the information
produced by the *Note `SHOW GLOBAL VARIABLES': show-variables. and
*Note `SHOW SESSION VARIABLES': show-variables. statements (see *Note
show-variables::).

This table describes the *Note `INFORMATION_SCHEMA GLOBAL_VARIABLES':
variables-table. and *Note `SESSION_VARIABLES': variables-table.
tables.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
VARIABLE_NAME                 Variable_name          
VARIABLE_VALUE                Value                  

*Notes*:

   * The `VARIABLE_VALUE' column for each of these tables is defined as
     `VARCHAR(20480)'.


File: manual.info,  Node: key-column-usage-table,  Next: parameters-table,  Prev: variables-table,  Up: information-schema

20.10 The `INFORMATION_SCHEMA KEY_COLUMN_USAGE' Table
=====================================================

The *Note `KEY_COLUMN_USAGE': key-column-usage-table. table describes
which key columns have constraints.

This table describes the `INFORMATION_SCHEMA KEY_COLUMN_USAGE' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`CONSTRAINT_CATALOG'                                 `def'
`CONSTRAINT_SCHEMA'                                  
`CONSTRAINT_NAME'                                    
`TABLE_CATALOG'                                      `def'
`TABLE_SCHEMA'                                       
`TABLE_NAME'                                         
`COLUMN_NAME'                                        
`ORDINAL_POSITION'                                   
`POSITION_IN_UNIQUE_CONSTRAINT'                       
`REFERENCED_TABLE_SCHEMA'                            
`REFERENCED_TABLE_NAME'                              
`REFERENCED_COLUMN_NAME'                             

*Notes*:

   * If the constraint is a foreign key, then this is the column of the
     foreign key, not the column that the foreign key references.

   * The value of `ORDINAL_POSITION' is the column's position within
     the constraint, not the column's position within the table. Column
     positions are numbered beginning with 1.

   * The value of `POSITION_IN_UNIQUE_CONSTRAINT' is `NULL' for unique
     and primary-key constraints. For foreign-key constraints, it is
     the ordinal position in key of the table that is being referenced.

     Suppose that there are two tables name `t1' and `t3' that have the
     following definitions:

          CREATE TABLE t1
          (
              s1 INT,
              s2 INT,
              s3 INT,
              PRIMARY KEY(s3)
          ) ENGINE=InnoDB;

          CREATE TABLE t3
          (
              s1 INT,
              s2 INT,
              s3 INT,
              KEY(s1),
              CONSTRAINT CO FOREIGN KEY (s2) REFERENCES t1(s3)
          ) ENGINE=InnoDB;

     For those two tables, the *Note `KEY_COLUMN_USAGE':
     key-column-usage-table. table has two rows:

        * One row with `CONSTRAINT_NAME' = `'PRIMARY'', `TABLE_NAME' =
          `'t1'', `COLUMN_NAME' = `'s3'', `ORDINAL_POSITION' = `1',
          `POSITION_IN_UNIQUE_CONSTRAINT' = `NULL'.

        * One row with `CONSTRAINT_NAME' = `'CO'', `TABLE_NAME' =
          `'t3'', `COLUMN_NAME' = `'s2'', `ORDINAL_POSITION' = `1',
          `POSITION_IN_UNIQUE_CONSTRAINT' = `1'.


File: manual.info,  Node: parameters-table,  Next: partitions-table,  Prev: key-column-usage-table,  Up: information-schema

20.11 The `INFORMATION_SCHEMA PARAMETERS' Table
===============================================

The *Note `PARAMETERS': parameters-table. table provides information
about stored procedure and function parameters, and about return values
for stored functions. Parameter information is similar to the contents
of the `param_list' column in the `mysql.proc' table.

This table describes the `INFORMATION_SCHEMA PARAMETERS' table.

`INFORMATION_SCHEMA' Name     `mysql.proc' Name      Remarks
`SPECIFIC_CATALOG'                                   `def'
`SPECIFIC_SCHEMA'             `db'                   routine database
`SPECIFIC_NAME'               `name'                 routine name
`ORDINAL_POSITION'                                   1, 2, 3, ... for
                                                     parameters, 0 for
                                                     function `RETURNS'
                                                     clause
`PARAMETER_MODE'                                     `IN', `OUT', `INOUT'
                                                     (`NULL' for `RETURNS')
`PARAMETER_NAME'                                     parameter name
                                                     (`NULL' for `RETURNS')
`DATA_TYPE'                                          same as for *Note
                                                     `COLUMNS':
                                                     columns-table. table
`CHARACTER_MAXIMUM_LENGTH'                           same as for *Note
                                                     `COLUMNS':
                                                     columns-table. table
`CHARACTER_OCTET_LENGTH'                             same as for *Note
                                                     `COLUMNS':
                                                     columns-table. table
`NUMERIC_PRECISION'                                  same as for *Note
                                                     `COLUMNS':
                                                     columns-table. table
`NUMERIC_SCALE'                                      same as for *Note
                                                     `COLUMNS':
                                                     columns-table. table
`CHARACTER_SET_NAME'                                 same as for *Note
                                                     `COLUMNS':
                                                     columns-table. table
`COLLATION_NAME'                                     same as for *Note
                                                     `COLUMNS':
                                                     columns-table. table
`DTD_IDENTIFIER'                                     same as for *Note
                                                     `COLUMNS':
                                                     columns-table. table
`ROUTINE_TYPE'                type                   same as for *Note
                                                     `ROUTINES':
                                                     routines-table. table

*Notes*:

   * The *Note `PARAMETERS': parameters-table. table was added in MySQL
     5.5.3.

   * For successive parameters of a stored procedure or function, the
     `ORDINAL_POSITION' values are 1, 2, 3, and so forth. For a stored
     function, there is also a row that describes the data type for the
     `RETURNS' clause. The return value is not a true parameter, so the
     row that describes it has these unique characteristics:

        * The `ORDINAL_POSITION' value is 0.

        * The `PARAMETER_NAME' and `PARAMETER_MODE' values are `NULL'
          because the return value has no name and the mode does not
          apply.


File: manual.info,  Node: partitions-table,  Next: plugins-table,  Prev: parameters-table,  Up: information-schema

20.12 The `INFORMATION_SCHEMA PARTITIONS' Table
===============================================

The *Note `PARTITIONS': partitions-table. table provides information
about table partitions. See *Note partitioning::, for more information
about partitioning tables.

This table describes the `INFORMATION_SCHEMA PARTITIONS' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`TABLE_CATALOG'                                      MySQL extension
`TABLE_SCHEMA'                                       MySQL extension
`TABLE_NAME'                                         MySQL extension
`PARTITION_NAME'                                     MySQL extension
`SUBPARTITION_NAME'                                  MySQL extension
`PARTITION_ORDINAL_POSITION'                         MySQL extension
`SUBPARTITION_ORDINAL_POSITION'                       MySQL extension
`PARTITION_METHOD'                                   MySQL extension
`SUBPARTITION_METHOD'                                MySQL extension
`PARTITION_EXPRESSION'                               MySQL extension
`SUBPARTITION_EXPRESSION'                            MySQL extension
`PARTITION_DESCRIPTION'                              MySQL extension
`TABLE_ROWS'                                         MySQL extension
`AVG_ROW_LENGTH'                                     MySQL extension
`DATA_LENGTH'                                        MySQL extension
`MAX_DATA_LENGTH'                                    MySQL extension
`INDEX_LENGTH'                                       MySQL extension
`DATA_FREE'                                          MySQL extension
`CREATE_TIME'                                        MySQL extension
`UPDATE_TIME'                                        MySQL extension
`CHECK_TIME'                                         MySQL extension
`CHECKSUM'                                           MySQL extension
`PARTITION_COMMENT'                                  MySQL extension
`NODEGROUP'                                          MySQL extension
`TABLESPACE_NAME'                                    MySQL extension

*Notes*:

   * The *Note `PARTITIONS': partitions-table. table is a nonstandard
     table.

     Each record in this table corresponds to an individual partition
     or subpartition of a partitioned table.

   * `TABLE_CATALOG': This column is always `def'.

   * `TABLE_SCHEMA': This column contains the name of the database to
     which the table belongs.

   * `TABLE_NAME': This column contains the name of the table
     containing the partition.

   * `PARTITION_NAME': The name of the partition.

   * `SUBPARTITION_NAME': If the *Note `PARTITIONS': partitions-table.
     table record represents a subpartition, then this column contains
     the name of subpartition; otherwise it is `NULL'.

   * `PARTITION_ORDINAL_POSITION': All partitions are indexed in the
     same order as they are defined, with `1' being the number assigned
     to the first partition. The indexing can change as partitions are
     added, dropped, and reorganized; the number shown is this column
     reflects the current order, taking into account any indexing
     changes.

   * `SUBPARTITION_ORDINAL_POSITION': Subpartitions within a given
     partition are also indexed and reindexed in the same manner as
     partitions are indexed within a table.

   * `PARTITION_METHOD': One of the values `RANGE', `LIST', `HASH',
     `LINEAR HASH', `KEY', or `LINEAR KEY'; that is, one of the
     available partitioning types as discussed in *Note
     partitioning-types::.

   * `SUBPARTITION_METHOD': One of the values `HASH', `LINEAR HASH',
     `KEY', or `LINEAR KEY'; that is, one of the available
     subpartitioning types as discussed in *Note
     partitioning-subpartitions::.

   * `PARTITION_EXPRESSION': This is the expression for the
     partitioning function used in the *Note `CREATE TABLE':
     create-table. or *Note `ALTER TABLE': alter-table. statement that
     created the table's current partitioning scheme.

     For example, consider a partitioned table created in the `test'
     database using this statement:

          CREATE TABLE tp (
              c1 INT,
              c2 INT,
              c3 VARCHAR(25)
          )
          PARTITION BY HASH(c1 + c2)
          PARTITIONS 4;

     The `PARTITION_EXPRESSION' column in a PARTITIONS table record for
     a partition from this table displays `c1 + c2', as shown here:

          mysql> SELECT DISTINCT PARTITION_EXPRESSION
               >     FROM INFORMATION_SCHEMA.PARTITIONS
               >     WHERE TABLE_NAME='tp' AND TABLE_SCHEMA='test';
          +----------------------+
          | PARTITION_EXPRESSION |
          +----------------------+
          | c1 + c2              |
          +----------------------+
          1 row in set (0.09 sec)

   * `SUBPARTITION_EXPRESSION': This works in the same fashion for the
     subpartitioning expression that defines the subpartitioning for a
     table as `PARTITION_EXPRESSION' does for the partitioning
     expression used to define a table's partitioning.

     If the table has no subpartitions, then this column is `NULL'.

   * `PARTITION_DESCRIPTION': This column is used for RANGE and LIST
     partitions. For a `RANGE' partition, it contains the value set in
     the partition's `VALUES LESS THAN' clause, which can be either an
     integer or `MAXVALUE'. For a `LIST' partition, this column
     contains the values defined in the partition's `VALUES IN' clause,
     which is a comma-separated list of integer values.

     For partitions whose `PARTITION_METHOD' is other than `RANGE' or
     `LIST', this column is always `NULL'.

   * `TABLE_ROWS': The number of table rows in the partition.

     For partitioned *Note `InnoDB': innodb-storage-engine. tables, the
     row count given in the `TABLE_ROWS' column is only an estimated
     value used in SQL optimization, and may not always be exact.

     For *Note `NDB': mysql-cluster. tables, you can also obtain this
     information using the *Note `ndb_desc':
     mysql-cluster-programs-ndb-desc.  utility.

   * `AVG_ROW_LENGTH': The average length of the rows stored in this
     partition or subpartition, in bytes.

     This is the same as `DATA_LENGTH' divided by `TABLE_ROWS'.

     You can also obtain equivalent information using the *Note
     `ndb_desc': mysql-cluster-programs-ndb-desc. utility.

   * `DATA_LENGTH': The total length of all rows stored in this
     partition or subpartition, in bytes--that is, the total number of
     bytes stored in the partition or subpartition.

     For *Note `NDB': mysql-cluster. tables, you can also obtain this
     information using the *Note `ndb_desc':
     mysql-cluster-programs-ndb-desc.  utility.

   * `MAX_DATA_LENGTH': The maximum number of bytes that can be stored
     in this partition or subpartition.

     For *Note `NDB': mysql-cluster. tables, you can also obtain this
     information using the *Note `ndb_desc':
     mysql-cluster-programs-ndb-desc.  utility.

   * `INDEX_LENGTH': The length of the index file for this partition or
     subpartition, in bytes.

     For partitions of *Note `NDB': mysql-cluster. tables, whether the
     tables use implicit or explicit partitioning, the `INDEX_LENGTH'
     column value is always 0.  However, you can obtain equivalent
     information using the *Note `ndb_desc':
     mysql-cluster-programs-ndb-desc. utility.

   * `DATA_FREE': The number of bytes allocated to the partition or
     subpartition but not used.

     For *Note `NDB': mysql-cluster. tables, you can also obtain this
     information using the *Note `ndb_desc':
     mysql-cluster-programs-ndb-desc.  utility.

   * `CREATE_TIME': The time of the partition's or subpartition's
     creation.

   * `UPDATE_TIME': The time that the partition or subpartition was
     last modified.

   * `CHECK_TIME': The last time that the table to which this partition
     or subpartition belongs was checked.

     *Note*:

     Some storage engines do not update this time; for tables using
     these storage engines, this value is always `NULL'.

   * `CHECKSUM': The checksum value, if any; otherwise, this column is
     `NULL'.

   * `PARTITION_COMMENT': This column contains the text of any comment
     made for the partition.

     In MySQL 5.5, the display width of this column is 80 characters,
     and partition comments which exceed this length are truncated to
     fit. This issue is fixed in MySQL 5.6. (Bug #11748924, Bug #37728)

     The default value for this column is an empty string.

   * `NODEGROUP': This is the nodegroup to which the partition belongs.
     This is relevant only to MySQL Cluster tables; otherwise the value
     of this column is always `0'.

   * `TABLESPACE_NAME': This column contains the name of the tablespace
     to which the partition belongs.  Currently, the value of this
     column is always `DEFAULT'.

   * A nonpartitioned table has one record in *Note
     `INFORMATION_SCHEMA.PARTITIONS': partitions-table.; however, the
     values of the `PARTITION_NAME', `SUBPARTITION_NAME',
     `PARTITION_ORDINAL_POSITION', `SUBPARTITION_ORDINAL_POSITION',
     `PARTITION_METHOD', `SUBPARTITION_METHOD', `PARTITION_EXPRESSION',
     `SUBPARTITION_EXPRESSION', and `PARTITION_DESCRIPTION' columns are
     all `NULL'. (The `PARTITION_COMMENT' column in this case is blank.)

     In MySQL 5.5, there is also only one record in the *Note
     `PARTITIONS': partitions-table. table for a table using the *Note
     `NDBCLUSTER': mysql-cluster. storage engine. The same columns are
     also `NULL' (or empty) as for a nonpartitioned table.


File: manual.info,  Node: plugins-table,  Next: processlist-table,  Prev: partitions-table,  Up: information-schema

20.13 The `INFORMATION_SCHEMA PLUGINS' Table
============================================

The *Note `PLUGINS': plugins-table. table provides information about
server plugins.

This table describes the `INFORMATION_SCHEMA PLUGINS' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`PLUGIN_NAME'                 `Name'                 MySQL extension
`PLUGIN_VERSION'                                     MySQL extension
`PLUGIN_STATUS'               `Status'               MySQL extension
`PLUGIN_TYPE'                 `Type'                 MySQL extension
`PLUGIN_TYPE_VERSION'                                MySQL extension
`PLUGIN_LIBRARY'              `Library'              MySQL extension
`PLUGIN_LIBRARY_VERSION'                             MySQL extension
`PLUGIN_AUTHOR'                                      MySQL extension
`PLUGIN_DESCRIPTION'                                 MySQL extension
`PLUGIN_LICENSE'                                     MySQL extension
`LOAD_OPTION'                                        MySQL extension

*Notes*:

   * The *Note `PLUGINS': plugins-table. table is a nonstandard table.

   * `PLUGIN_NAME' is the name used to refer to the plugin in
     statements such as *Note `INSTALL PLUGIN': install-plugin. and
     *Note `UNINSTALL PLUGIN': uninstall-plugin.

   * `PLUGIN_VERSION' is the version from the plugin's general type
     descriptor.

   * `PLUGIN_STATUS' indicates the plugin status, one of `ACTIVE',
     `INACTIVE', `DISABLED', or `DELETED'.

   * `PLUGIN_TYPE' indicates the type of plugin, such as `STORAGE
     ENGINE', `INFORMATION_SCHEMA', or `AUTHENTICATION'.

   * `PLUGIN_TYPE_VERSION' is the version from the plugin's
     type-specific descriptor.

   * `PLUGIN_LIBRARY' is the name of the plugin shared object file.
     This is the name used to refer to the plugin file in statements
     such as *Note `INSTALL PLUGIN': install-plugin. and *Note
     `UNINSTALL PLUGIN': uninstall-plugin. This file is located in the
     directory named by the `plugin_dir' system variable. If the
     library name is `NULL', the plugin is compiled in and cannot be
     uninstalled with *Note `UNINSTALL PLUGIN': uninstall-plugin.

   * `PLUGIN_LIBRARY_VERSION' indicates the plugin API interface
     version.

   * `PLUGIN_AUTHOR' names the plugin author.

   * `PLUGIN_DESCRIPTION' provides a short description of the plugin.

   * `PLUGIN_LICENSE' indicates how the plugin is licensed; for
     example, `GPL'.

   * `LOAD_OPTION' indicates how the plugin was loaded. The value is
     `OFF', `ON', `FORCE', or `FORCE_PLUS_PERMANENT'. See *Note
     server-plugin-loading::. This column was added in MySQL 5.5.7.

For plugins installed with *Note `INSTALL PLUGIN': install-plugin, the
`PLUGIN_NAME' and `PLUGIN_LIBRARY' values are also registered in the
`mysql.plugin' table.

These statements are equivalent:

     SELECT
       PLUGIN_NAME, PLUGIN_STATUS, PLUGIN_TYPE,
       PLUGIN_LIBRARY, PLUGIN_LICENSE
     FROM INFORMATION_SCHEMA.PLUGINS;

     SHOW PLUGINS;

For information about plugin data structures that form the basis of the
information in the *Note `PLUGINS': plugins-table.  table, see *Note
plugin-api::.

Plugin information is also available using the *Note `SHOW PLUGINS':
show-plugins. statement. See *Note show-plugins::.


File: manual.info,  Node: processlist-table,  Next: profiling-table,  Prev: plugins-table,  Up: information-schema

20.14 The `INFORMATION_SCHEMA PROCESSLIST' Table
================================================

The *Note `PROCESSLIST': processlist-table. table provides information
about which threads are running.

This table describes the `INFORMATION_SCHEMA PROCESSLIST' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`ID'                          `Id'                   MySQL extension
`USER'                        `User'                 MySQL extension
`HOST'                        `Host'                 MySQL extension
`DB'                          `db'                   MySQL extension
`COMMAND'                     `Command'              MySQL extension
*Note `TIME': time.           `Time'                 MySQL extension
`STATE'                       `State'                MySQL extension
`INFO'                        `Info'                 MySQL extension

For an extensive description of the table columns, see *Note
show-processlist::.

*Notes*:

   * The *Note `PROCESSLIST': processlist-table. table is a nonstandard
     table.

   * Like the output from the corresponding *Note `SHOW': show.
     statement, the *Note `PROCESSLIST': processlist-table. table will
     only show information about your own threads, unless you have the
     `PROCESS' privilege, in which case you will see information about
     other threads, too. As an anonymous user, you cannot see any rows
     at all.

   * If an SQL statement refers to *Note
     `INFORMATION_SCHEMA.PROCESSLIST': processlist-table, then MySQL
     will populate the entire table once, when statement execution
     begins, so there is read consistency during the statement. There
     is no read consistency for a multi-statement transaction, though.

The following statements are equivalent:

     SELECT * FROM INFORMATION_SCHEMA.PROCESSLIST

     SHOW FULL PROCESSLIST


File: manual.info,  Node: profiling-table,  Next: referential-constraints-table,  Prev: processlist-table,  Up: information-schema

20.15 The `INFORMATION_SCHEMA PROFILING' Table
==============================================

The *Note `PROFILING': profiling-table. table provides statement
profiling information. Its contents correspond to the information
produced by the *Note `SHOW PROFILES': show-profiles. and *Note `SHOW
PROFILE': show-profile.  statements (see *Note show-profiles::). The
table is empty unless the `profiling' session variable is set to 1.

This table describes the `INFORMATION_SCHEMA PROFILING' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`QUERY_ID'                    `Query_ID'             
`SEQ'                         `'                     
`STATE'                       `Status'               
`DURATION'                    `Duration'             
`CPU_USER'                    `CPU_user'             
`CPU_SYSTEM'                  `CPU_system'           
`CONTEXT_VOLUNTARY'           `Context_voluntary'    
`CONTEXT_INVOLUNTARY'         `Context_involuntary'  
`BLOCK_OPS_IN'                `Block_ops_in'         
`BLOCK_OPS_OUT'               `Block_ops_out'        
`MESSAGES_SENT'               `Messages_sent'        
`MESSAGES_RECEIVED'           `Messages_received'    
`PAGE_FAULTS_MAJOR'           `Page_faults_major'    
`PAGE_FAULTS_MINOR'           `Page_faults_minor'    
`SWAPS'                       `Swaps'                
`SOURCE_FUNCTION'             `Source_function'      
`SOURCE_FILE'                 `Source_file'          
`SOURCE_LINE'                 `Source_line'          

*Notes*:

   * `QUERY_ID' is a numeric statement identifier.

   * `SEQ' is a sequence number indicating the display order for rows
     with the same `QUERY_ID' value.

   * `STATE' is the profiling state to which the row measurements apply.

   * `DURATION' indicates how long statement execution remained in the
     given state, in seconds.

   * `CPU_USER' and `CPU_SYSTEM' indicate user and system CPU use, in
     seconds.

   * `CONTEXT_VOLUNTARY' and `CONTEXT_INVOLUNTARY' indicate how many
     voluntary and involuntary context switches occurred.

   * `BLOCK_OPS_IN' and `BLOCK_OPS_OUT' indicate the number of block
     input and output operations.

   * `MESSAGES_SENT' and `MESSAGES_RECEIVED' indicate the number of
     communication messages sent and received.

   * `PAGE_FAULTS_MAJOR' and `PAGE_FAULTS_MINOR' indicate the number of
     major and minor page faults.

   * `SWAPS' indicates how many swaps occurred.

   * `SOURCE_FUNCTION', `SOURCE_FILE', and `SOURCE_LINE' provide
     information indicating where in the source code the profiled state
     executes.


File: manual.info,  Node: referential-constraints-table,  Next: routines-table,  Prev: profiling-table,  Up: information-schema

20.16 The `INFORMATION_SCHEMA REFERENTIAL_CONSTRAINTS' Table
============================================================

The *Note `REFERENTIAL_CONSTRAINTS': referential-constraints-table.
table provides information about foreign keys.

This table describes the *Note `REFERENTIAL_CONSTRAINTS':
referential-constraints-table.  table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
CONSTRAINT_CATALOG                                   def
CONSTRAINT_SCHEMA                                    
CONSTRAINT_NAME                                      
UNIQUE_CONSTRAINT_CATALOG                            def
UNIQUE_CONSTRAINT_SCHEMA                             
UNIQUE_CONSTRAINT_NAME                               
MATCH_OPTION                                         
UPDATE_RULE                                          
DELETE_RULE                                          
TABLE_NAME                                           
REFERENCED_TABLE_NAME                                

*Notes*:

   * `TABLE_NAME' has the same value as `TABLE_NAME' in *Note
     `INFORMATION_SCHEMA.TABLE_CONSTRAINTS': table-constraints-table.

   * `CONSTRAINT_SCHEMA' and `CONSTRAINT_NAME' identify the foreign key.

   * `UNIQUE_CONSTRAINT_SCHEMA', `UNIQUE_CONSTRAINT_NAME', and
     `REFERENCED_TABLE_NAME' identify the referenced key.

   * The only valid value at this time for `MATCH_OPTION' is `NONE'.

   * The possible values for `UPDATE_RULE' or `DELETE_RULE' are
     `CASCADE', `SET NULL', `SET DEFAULT', `RESTRICT', `NO ACTION'.


File: manual.info,  Node: routines-table,  Next: schemata-table,  Prev: referential-constraints-table,  Up: information-schema

20.17 The `INFORMATION_SCHEMA ROUTINES' Table
=============================================

The *Note `ROUTINES': routines-table. table provides information about
stored routines (both procedures and functions).  The *Note `ROUTINES':
routines-table. table does not include user-defined functions (UDFs).

The column named ``mysql.proc' name' indicates the `mysql.proc' table
column that corresponds to the *Note `INFORMATION_SCHEMA.ROUTINES':
routines-table. table column, if any.

This table describes the `INFORMATION_SCHEMA ROUTINES' table.

`INFORMATION_SCHEMA' Name     `mysql.proc' Name      Remarks
`SPECIFIC_NAME'               `specific_name'        
`ROUTINE_CATALOG'                                    `def'
`ROUTINE_SCHEMA'              `db'                   
`ROUTINE_NAME'                `name'                 
`ROUTINE_TYPE'                `type'                 `{PROCEDURE|FUNCTION}'
`DATA_TYPE'                                          same as for *Note
                                                     `COLUMNS':
                                                     columns-table. table
`CHARACTER_MAXIMUM_LENGTH'                           same as for *Note
                                                     `COLUMNS':
                                                     columns-table. table
`CHARACTER_OCTET_LENGTH'                             same as for *Note
                                                     `COLUMNS':
                                                     columns-table. table
`NUMERIC_PRECISION'                                  same as for *Note
                                                     `COLUMNS':
                                                     columns-table. table
`NUMERIC_SCALE'                                      same as for *Note
                                                     `COLUMNS':
                                                     columns-table. table
`CHARACTER_SET_NAME'                                 same as for *Note
                                                     `COLUMNS':
                                                     columns-table. table
`COLLATION_NAME'                                     same as for *Note
                                                     `COLUMNS':
                                                     columns-table. table
`DTD_IDENTIFIER'                                     data type descriptor
`ROUTINE_BODY'                                       `SQL'
`ROUTINE_DEFINITION'          `body_utf8'            
`EXTERNAL_NAME'                                      `NULL'
`EXTERNAL_LANGUAGE'           `language'             `NULL'
`PARAMETER_STYLE'                                    `SQL'
`IS_DETERMINISTIC'            `is_deterministic'     
`SQL_DATA_ACCESS'             `sql_data_access'      
`SQL_PATH'                                           `NULL'
`SECURITY_TYPE'               `security_type'        
`CREATED'                     `created'              
`LAST_ALTERED'                `modified'             
`SQL_MODE'                    `sql_mode'             MySQL extension
`ROUTINE_COMMENT'             `comment'              MySQL extension
`DEFINER'                     `definer'              MySQL extension
`CHARACTER_SET_CLIENT'                               MySQL extension
`COLLATION_CONNECTION'                               MySQL extension
`DATABASE_COLLATION'                                 MySQL extension

*Notes*:

   * MySQL calculates `EXTERNAL_LANGUAGE' thus:

        * If `mysql.proc.language='SQL'', `EXTERNAL_LANGUAGE' is `NULL'

        * Otherwise, `EXTERNAL_LANGUAGE' is what is in
          `mysql.proc.language'. However, we do not have external
          languages yet, so it is always `NULL'.

   * `CREATED': The date and time when the routine was created. This is
     a *Note `TIMESTAMP': datetime. value.

   * `LAST_ALTERED': The date and time when the routine was last
     modified. This is a *Note `TIMESTAMP': datetime. value. If the
     routine has not been modified since its creation, this column holds
     the same value as the `CREATED' column.

   * `SQL_MODE': The SQL mode in effect when the routine was created or
     altered, and under which the routine executes. For the permitted
     values, see *Note server-sql-mode::.

   * `CHARACTER_SET_CLIENT': The session value of the
     `character_set_client' system variable when the routine was
     created.

   * `COLLATION_CONNECTION': The session value of the
     `collation_connection' system variable when the routine was
     created.

   * `DATABASE_COLLATION': The collation of the database with which the
     routine is associated.

   * The `DATA_TYPE', `CHARACTER_MAXIMUM_LENGTH',
     `CHARACTER_OCTET_LENGTH', `NUMERIC_PRECISION', `NUMERIC_SCALE',
     `CHARACTER_SET_NAME', and `COLLATION_NAME' columns provide
     information about the data type for the `RETURNS' clause of stored
     functions. If a stored routine is a stored procedure, these
     columns all are `NULL'.  These columns were added in MySQL 5.5.3.

   * Information about stored function `RETURNS' data types is also
     available in the *Note `PARAMETERS': parameters-table. table. The
     return value data type row for a function can be identified as the
     row that has an `ORDINAL_POSITION' value of 0.


File: manual.info,  Node: schemata-table,  Next: schema-privileges-table,  Prev: routines-table,  Up: information-schema

20.18 The `INFORMATION_SCHEMA SCHEMATA' Table
=============================================

A schema is a database, so the *Note `SCHEMATA': schemata-table. table
provides information about databases.

This table describes the `INFORMATION_SCHEMA SCHEMATA' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`CATALOG_NAME'                                       `def'
`SCHEMA_NAME'                                        Database
`DEFAULT_CHARACTER_SET_NAME'                         
`DEFAULT_COLLATION_NAME'                             
`SQL_PATH'                                           `NULL'

The following statements are equivalent:

     SELECT SCHEMA_NAME AS `Database`
       FROM INFORMATION_SCHEMA.SCHEMATA
       [WHERE SCHEMA_NAME LIKE 'WILD']

     SHOW DATABASES
       [LIKE 'WILD']


File: manual.info,  Node: schema-privileges-table,  Next: statistics-table,  Prev: schemata-table,  Up: information-schema

20.19 The `INFORMATION_SCHEMA SCHEMA_PRIVILEGES' Table
======================================================

The *Note `SCHEMA_PRIVILEGES': schema-privileges-table. table provides
information about schema (database) privileges. This information comes
from the `mysql.db' grant table.

This table describes the `INFORMATION_SCHEMA SCHEMA_PRIVILEGES' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`GRANTEE'                                            `'USER_NAME'@'HOST_NAME''
                                                     value, MySQL extension
`TABLE_CATALOG'                                      `def', MySQL extension
`TABLE_SCHEMA'                                       MySQL extension
`PRIVILEGE_TYPE'                                     MySQL extension
`IS_GRANTABLE'                                       MySQL extension

*Notes*:

   * This is a nonstandard table. It takes its values from the
     `mysql.db' table.


File: manual.info,  Node: statistics-table,  Next: tables-table,  Prev: schema-privileges-table,  Up: information-schema

20.20 The `INFORMATION_SCHEMA STATISTICS' Table
===============================================

The *Note `STATISTICS': statistics-table. table provides information
about table indexes.

This table describes the `INFORMATION_SCHEMA STATISTICS' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`TABLE_CATALOG'                                      `def'
`TABLE_SCHEMA'                                       = Database
`TABLE_NAME'                  `Table'                
`NON_UNIQUE'                  `Non_unique'           
`INDEX_SCHEMA'                                       = Database
`INDEX_NAME'                  `Key_name'             
`SEQ_IN_INDEX'                `Seq_in_index'         
`COLUMN_NAME'                 `Column_name'          
`COLLATION'                   `Collation'            
`CARDINALITY'                 `Cardinality'          
`SUB_PART'                    `Sub_part'             MySQL extension
`PACKED'                      `Packed'               MySQL extension
`NULLABLE'                    `Null'                 MySQL extension
`INDEX_TYPE'                  `Index_type'           MySQL extension
`COMMENT'                     `Comment'              MySQL extension

*Notes*:

   * There is no standard table for indexes. The preceding list is
     similar to what SQL Server 2000 returns for `sp_statistics',
     except that we replaced the name `QUALIFIER' with `CATALOG' and we
     replaced the name `OWNER' with `SCHEMA'.

     Clearly, the preceding table and the output from *Note `SHOW
     INDEX': show-index. are derived from the same parent. So the
     correlation is already close.

The following statements are equivalent:

     SELECT * FROM INFORMATION_SCHEMA.STATISTICS
       WHERE table_name = 'TBL_NAME'
       AND table_schema = 'DB_NAME'

     SHOW INDEX
       FROM TBL_NAME
       FROM DB_NAME


File: manual.info,  Node: tables-table,  Next: tablespaces-table,  Prev: statistics-table,  Up: information-schema

20.21 The `INFORMATION_SCHEMA TABLES' Table
===========================================

The *Note `TABLES': tables-table. table provides information about
tables in databases.

This table describes the `INFORMATION_SCHEMA TABLES' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`TABLE_CATALOG'                                      `def'
`TABLE_SCHEMA'                `Table_'...            
`TABLE_NAME'                  `Table_'...            
`TABLE_TYPE'                                         
`ENGINE'                      `Engine'               MySQL extension
`VERSION'                     `Version'              The version number of
                                                     the table's `.frm'
                                                     file, MySQL extension
`ROW_FORMAT'                  `Row_format'           MySQL extension
`TABLE_ROWS'                  `Rows'                 MySQL extension
`AVG_ROW_LENGTH'              `Avg_row_length'       MySQL extension
`DATA_LENGTH'                 `Data_length'          MySQL extension
`MAX_DATA_LENGTH'             `Max_data_length'      MySQL extension
`INDEX_LENGTH'                `Index_length'         MySQL extension
`DATA_FREE'                   `Data_free'            MySQL extension
`AUTO_INCREMENT'              `Auto_increment'       MySQL extension
`CREATE_TIME'                 `Create_time'          MySQL extension
`UPDATE_TIME'                 `Update_time'          MySQL extension
`CHECK_TIME'                  `Check_time'           MySQL extension
`TABLE_COLLATION'             `Collation'            MySQL extension
`CHECKSUM'                    `Checksum'             MySQL extension
`CREATE_OPTIONS'              `Create_options'       MySQL extension
`TABLE_COMMENT'               `Comment'              MySQL extension

*Notes*:

   * `TABLE_SCHEMA' and `TABLE_NAME' are a single field in a *Note
     `SHOW': show. display, for example `Table_in_db1'.

   * `TABLE_TYPE' should be `BASE TABLE' or `VIEW'. Currently, the
     *Note `TABLES': tables-table. table does not list `TEMPORARY'
     tables.

   * For partitioned tables, the `ENGINE' column shows the name of the
     storage engine used by all partitions.  (Previously, this column
     showed `PARTITION' for such tables.)

   * The `TABLE_ROWS' column is `NULL' if the table is in the
     `INFORMATION_SCHEMA' database.

     For *Note `InnoDB': innodb-storage-engine. tables, the row count
     is only a rough estimate used in SQL optimization. (This is also
     true if the *Note `InnoDB': innodb-storage-engine. table is
     partitioned.)

   * For *Note `NDB': mysql-cluster. tables, `DATA_LENGTH' includes
     data stored in main memory only; the `MAX_DATA_LENGTH' and
     `DATA_FREE' columns apply to Disk Data.

   * For MySQL Cluster Disk Data tables, `MAX_DATA_LENGTH' shows the
     space allocated for the disk part of a Disk Data table or
     fragment. (In-memory data resource usage is reported by the
     `DATA_LENGTH' column.)

   * The `DATA_FREE' column shows the free space in bytes for `InnoDB'
     tables.

     For MySQL Cluster, `DATA_FREE' shows the space allocated on disk
     for, but not used by, a Disk Data table or fragment on disk.
     (In-memory data resource usage is reported by the `DATA_LENGTH'
     column.)

   * We have nothing for the table's default character set.
     `TABLE_COLLATION' is close, because collation names begin with a
     character set name.

   * The `CREATE_OPTIONS' column shows `partitioned' if the table is
     partitioned.

The following statements are equivalent:

     SELECT table_name FROM INFORMATION_SCHEMA.TABLES
       WHERE table_schema = 'DB_NAME'
       [AND table_name LIKE 'WILD']

     SHOW TABLES
       FROM DB_NAME
       [LIKE 'WILD']


File: manual.info,  Node: tablespaces-table,  Next: table-constraints-table,  Prev: tables-table,  Up: information-schema

20.22 The `INFORMATION_SCHEMA TABLESPACES' Table
================================================

The *Note `TABLESPACES': tablespaces-table. table provides information
about active tablespaces. The table was added in MySQL 5.5.3.

This table describes the `INFORMATION_SCHEMA TABLESPACES' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`TABLESPACE_NAME'                                    MySQL extension
`ENGINE'                                             MySQL extension
`TABLESPACE_TYPE'                                    MySQL extension
`LOGFILE_GROUP_NAME'                                 MySQL extension
`EXTENT_SIZE'                                        MySQL extension
`AUTOEXTEND_SIZE'                                    MySQL extension
`MAXIMUM_SIZE'                                       MySQL extension
`NODEGROUP_ID'                                       MySQL extension
`TABLESPACE_COMMENT'                                 MySQL extension


File: manual.info,  Node: table-constraints-table,  Next: table-privileges-table,  Prev: tablespaces-table,  Up: information-schema

20.23 The `INFORMATION_SCHEMA TABLE_CONSTRAINTS' Table
======================================================

The *Note `TABLE_CONSTRAINTS': table-constraints-table. table describes
which tables have constraints.

This table describes the `INFORMATION_SCHEMA TABLE_CONSTRAINTS' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`CONSTRAINT_CATALOG'                                 `def'
`CONSTRAINT_SCHEMA'                                  
`CONSTRAINT_NAME'                                    
`TABLE_SCHEMA'                                       
`TABLE_NAME'                                         
`CONSTRAINT_TYPE'                                    

*Notes*:

   * The `CONSTRAINT_TYPE' value can be `UNIQUE', `PRIMARY KEY', or
     `FOREIGN KEY'.

   * The `UNIQUE' and `PRIMARY KEY' information is about the same as
     what you get from the `Key_name' field in the output from *Note
     `SHOW INDEX': show-index. when the `Non_unique' field is `0'.

   * The `CONSTRAINT_TYPE' column can contain one of these values:
     `UNIQUE', `PRIMARY KEY', `FOREIGN KEY', `CHECK'. This is a *Note
     `CHAR': char. (not *Note `ENUM': enum.) column. The `CHECK' value
     is not available until we support `CHECK'.


File: manual.info,  Node: table-privileges-table,  Next: triggers-table,  Prev: table-constraints-table,  Up: information-schema

20.24 The `INFORMATION_SCHEMA TABLE_PRIVILEGES' Table
=====================================================

The *Note `TABLE_PRIVILEGES': table-privileges-table. table provides
information about table privileges. This information comes from the
`mysql.tables_priv' grant table.

This table describes the `INFORMATION_SCHEMA TABLE_PRIVILEGES' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`GRANTEE'                                            `'USER_NAME'@'HOST_NAME''
                                                     value
`TABLE_CATALOG'                                      `def'
`TABLE_SCHEMA'                                       
`TABLE_NAME'                                         
`PRIVILEGE_TYPE'                                     
`IS_GRANTABLE'                                       

*Notes*:

   * `PRIVILEGE_TYPE' can contain one (and only one) of these values:
     `SELECT', `INSERT', `UPDATE', `REFERENCES', `ALTER', `INDEX',
     `DROP', `CREATE VIEW'.

The following statements are _not_ equivalent:

     SELECT ... FROM INFORMATION_SCHEMA.TABLE_PRIVILEGES

     SHOW GRANTS ...


File: manual.info,  Node: triggers-table,  Next: user-privileges-table,  Prev: table-privileges-table,  Up: information-schema

20.25 The `INFORMATION_SCHEMA TRIGGERS' Table
=============================================

The *Note `TRIGGERS': triggers-table. table provides information about
triggers. You can see information only for databases and tables for
which you have the `TRIGGER' privilege.

This table describes the `INFORMATION_SCHEMA TRIGGERS' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`TRIGGER_CATALOG'                                    `def'
`TRIGGER_SCHEMA'                                     
`TRIGGER_NAME'                `Trigger'              
`EVENT_MANIPULATION'          `Event'                
`EVENT_OBJECT_CATALOG'                               `def'
`EVENT_OBJECT_SCHEMA'                                
`EVENT_OBJECT_TABLE'          `Table'                
`ACTION_ORDER'                                       `0'
`ACTION_CONDITION'                                   `NULL'
`ACTION_STATEMENT'            `Statement'            
`ACTION_ORIENTATION'                                 `ROW'
`ACTION_TIMING'               `Timing'               
`ACTION_REFERENCE_OLD_TABLE'                         `NULL'
`ACTION_REFERENCE_NEW_TABLE'                         `NULL'
`ACTION_REFERENCE_OLD_ROW'                           `OLD'
`ACTION_REFERENCE_NEW_ROW'                           `NEW'
`CREATED'                     `Created'              
`SQL_MODE'                    `sql_mode'             MySQL extension
`DEFINER'                     `Definer'              MySQL extension
`CHARACTER_SET_CLIENT'        `character_set_client' MySQL extension
`COLLATION_CONNECTION'        `collation_connection' MySQL extension
`DATABASE_COLLATION'          `Database Collation'   MySQL extension

*Notes*:

   * The names in the `*Note `SHOW': show.  Name' column refer to the
     *Note `SHOW TRIGGERS': show-triggers. statement, not *Note `SHOW
     CREATE TRIGGER': show-create-trigger. See *Note show-triggers::.

   * `TRIGGER_SCHEMA' and `TRIGGER_NAME': The name of the database in
     which the trigger occurs and the trigger name, respectively.

   * `EVENT_MANIPULATION': The trigger event. This is the type of
     operation on the associated table for which the trigger activates.
     The value is `'INSERT'' (a row was inserted), `'DELETE'' (a row was
     deleted), or `'UPDATE'' (a row was modified).

   * `EVENT_OBJECT_SCHEMA' and `EVENT_OBJECT_TABLE': As noted in *Note
     triggers::, every trigger is associated with exactly one table.
     These columns indicate the database in which this table occurs,
     and the table name, respectively.

   * `ACTION_ORDER': The ordinal position of the trigger's action
     within the list of all similar triggers on the same table.
     Currently, this value is always `0', because it is not possible to
     have more than one trigger with the same `EVENT_MANIPULATION' and
     `ACTION_TIMING' on the same table.

   * `ACTION_STATEMENT': The trigger body; that is, the statement
     executed when the trigger activates. This text uses UTF-8 encoding.

   * `ACTION_ORIENTATION': Always contains the value `'ROW''.

   * `ACTION_TIMING': Whether the trigger activates before or after the
     triggering event. The value is `'BEFORE'' or `'AFTER''.

   * `ACTION_REFERENCE_OLD_ROW' and `ACTION_REFERENCE_NEW_ROW': The old
     and new column identifiers, respectively. This means that
     `ACTION_REFERENCE_OLD_ROW' always contains the value `'OLD'' and
     `ACTION_REFERENCE_NEW_ROW' always contains the value `'NEW''.

   * `SQL_MODE': The SQL mode in effect when the trigger was created,
     and under which the trigger executes. For the permitted values,
     see *Note server-sql-mode::.

   * `DEFINER': The account of the user who created the trigger, in
     `'USER_NAME'@'HOST_NAME'' format.

   * `CHARACTER_SET_CLIENT': The session value of the
     `character_set_client' system variable when the trigger was
     created.

   * `COLLATION_CONNECTION': The session value of the
     `collation_connection' system variable when the trigger was
     created.

   * `DATABASE_COLLATION': The collation of the database with which the
     trigger is associated.

   * The following columns currently always contain `NULL':
     `ACTION_CONDITION', `ACTION_REFERENCE_OLD_TABLE',
     `ACTION_REFERENCE_NEW_TABLE', and `CREATED'.

Example, using the `ins_sum' trigger defined in *Note triggers:::

     mysql> SELECT * FROM INFORMATION_SCHEMA.TRIGGERS
         -> WHERE TRIGGER_SCHEMA='test' AND TRIGGER_NAME='ins_sum'\G
     *************************** 1. row ***************************
                TRIGGER_CATALOG: def
                 TRIGGER_SCHEMA: test
                   TRIGGER_NAME: ins_sum
             EVENT_MANIPULATION: INSERT
           EVENT_OBJECT_CATALOG: def
            EVENT_OBJECT_SCHEMA: test
             EVENT_OBJECT_TABLE: account
                   ACTION_ORDER: 0
               ACTION_CONDITION: NULL
               ACTION_STATEMENT: SET @sum = @sum + NEW.amount
             ACTION_ORIENTATION: ROW
                  ACTION_TIMING: BEFORE
     ACTION_REFERENCE_OLD_TABLE: NULL
     ACTION_REFERENCE_NEW_TABLE: NULL
       ACTION_REFERENCE_OLD_ROW: OLD
       ACTION_REFERENCE_NEW_ROW: NEW
                        CREATED: NULL
                       SQL_MODE:
                        DEFINER: me@localhost
           CHARACTER_SET_CLIENT: utf8
           COLLATION_CONNECTION: utf8_general_ci
             DATABASE_COLLATION: latin1_swedish_ci


File: manual.info,  Node: user-privileges-table,  Next: views-table,  Prev: triggers-table,  Up: information-schema

20.26 The `INFORMATION_SCHEMA USER_PRIVILEGES' Table
====================================================

The *Note `USER_PRIVILEGES': user-privileges-table. table provides
information about global privileges. This information comes from the
`mysql.user' grant table.

This table describes the `INFORMATION_SCHEMA USER_PRIVILEGES' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`GRANTEE'                                            `'USER_NAME'@'HOST_NAME''
                                                     value, MySQL extension
`TABLE_CATALOG'                                      `def', MySQL extension
`PRIVILEGE_TYPE'                                     MySQL extension
`IS_GRANTABLE'                                       MySQL extension

*Notes*:

   * This is a nonstandard table. It takes its values from the
     `mysql.user' table.


File: manual.info,  Node: views-table,  Next: innodb-i_s-tables,  Prev: user-privileges-table,  Up: information-schema

20.27 The `INFORMATION_SCHEMA VIEWS' Table
==========================================

The *Note `VIEWS': views-table. table provides information about views
in databases. You must have the `SHOW VIEW' privilege to access this
table.

This table describes the `INFORMATION_SCHEMA VIEWS' table.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`TABLE_CATALOG'                                      `def'
`TABLE_SCHEMA'                                       
`TABLE_NAME'                                         
`VIEW_DEFINITION'                                    
`CHECK_OPTION'                                       
`IS_UPDATABLE'                                       
`DEFINER'                                            
`SECURITY_TYPE'                                      
`CHARACTER_SET_CLIENT'                               MySQL extension
`COLLATION_CONNECTION'                               MySQL extension

*Notes*:

   * The `VIEW_DEFINITION' column has most of what you see in the
     `Create Table' field that *Note `SHOW CREATE VIEW':
     show-create-view. produces. Skip the words before *Note `SELECT':
     select. and skip the words `WITH CHECK OPTION'. Suppose that the
     original statement was:

          CREATE VIEW v AS
            SELECT s2,s1 FROM t
            WHERE s1 > 5
            ORDER BY s1
            WITH CHECK OPTION;

     Then the view definition looks like this:

          SELECT s2,s1 FROM t WHERE s1 > 5 ORDER BY s1

   * The `CHECK_OPTION' column has a value of `NONE', `CASCADE', or
     `LOCAL'.

   * MySQL sets a flag, called the view updatability flag, at *Note
     `CREATE VIEW': create-view. time. The flag is set to `YES' (true)
     if *Note `UPDATE': update. and *Note `DELETE': delete. (and
     similar operations) are legal for the view. Otherwise, the flag is
     set to `NO' (false). The `IS_UPDATABLE' column in the *Note
     `VIEWS': views-table. table displays the status of this flag. It
     means that the server always knows whether a view is updatable. If
     the view is not updatable, statements such *Note `UPDATE': update,
     *Note `DELETE': delete, and *Note `INSERT': insert. are illegal
     and will be rejected. (Note that even if a view is updatable, it
     might not be possible to insert into it; for details, refer to
     *Note create-view::.)

   * `DEFINER': The account of the user who created the view, in
     `'USER_NAME'@'HOST_NAME'' format. `SECURITY_TYPE' has a value of
     `DEFINER' or `INVOKER'.

   * `CHARACTER_SET_CLIENT': The session value of the
     `character_set_client' system variable when the view was created.

   * `COLLATION_CONNECTION': The session value of the
     `collation_connection' system variable when the view was created.

MySQL lets you use different `sql_mode' settings to tell the server the
type of SQL syntax to support. For example, you might use the `ANSI'
SQL mode to ensure MySQL correctly interprets the standard SQL
concatenation operator, the double bar (`||'), in your queries.  If you
then create a view that concatenates items, you might worry that
changing the `sql_mode' setting to a value different from `ANSI' could
cause the view to become invalid. But this is not the case. No matter
how you write out a view definition, MySQL always stores it the same
way, in a canonical form. Here is an example that shows how the server
changes a double bar concatenation operator to a `CONCAT()' function:

     mysql> SET sql_mode = 'ANSI';
     Query OK, 0 rows affected (0.00 sec)

     mysql> CREATE VIEW test.v AS SELECT 'a' || 'b' as col1;
     Query OK, 0 rows affected (0.00 sec)

     mysql> SELECT VIEW_DEFINITION FROM INFORMATION_SCHEMA.VIEWS
         -> WHERE TABLE_SCHEMA = 'test' AND TABLE_NAME = 'v';
     +----------------------------------+
     | VIEW_DEFINITION                  |
     +----------------------------------+
     | select concat('a','b') AS `col1` |
     +----------------------------------+
     1 row in set (0.00 sec)

The advantage of storing a view definition in canonical form is that
changes made later to the value of `sql_mode' will not affect the
results from the view. However an additional consequence is that
comments prior to *Note `SELECT': select. are stripped from the
definition by the server.


File: manual.info,  Node: innodb-i_s-tables,  Next: mysql-cluster-i_s-tables,  Prev: views-table,  Up: information-schema

20.28 `INFORMATION_SCHEMA' Tables for `InnoDB'
==============================================

* Menu:

* innodb-cmp-table::             The `INFORMATION_SCHEMA INNODB_CMP' and `INNODB_CMP_RESET' Tables
* innodb-cmpmem-table::          The `INFORMATION_SCHEMA INNODB_CMPMEM' and `INNODB_CMPMEM_RESET' Tables
* innodb-trx-table::             The `INFORMATION_SCHEMA INNODB_TRX' Table
* innodb-locks-table::           The `INFORMATION_SCHEMA INNODB_LOCKS' Table
* innodb-lock-waits-table::      The `INFORMATION_SCHEMA INNODB_LOCK_WAITS' Table
* innodb-buffer-page-table::     The `INFORMATION_SCHEMA INNODB_BUFFER_PAGE' Table
* innodb-buffer-page-lru-table::  The `INFORMATION_SCHEMA INNODB_BUFFER_PAGE_LRU' Table
* innodb-buffer-pool-stats-table::  The `INFORMATION_SCHEMA INNODB_BUFFER_POOL_STATS' Table

The `InnoDB' tables related to the `InnoDB' storage engine help you to
monitor ongoing `InnoDB' activity, to detect inefficiencies before they
turn into issues, or to troubleshoot performance and capacity issues
that do occur. As your database becomes bigger and busier, running up
against the limits of your hardware capacity, you monitor and tune
these aspects to keep the database running smoothly. The monitoring
information deals with:

   * `InnoDB' table compression, a feature whose use depends on a
     balance between I/O reduction, CPU usage, buffer pool management,
     and how much compression is possible for your data.

   * Transactions and locks, features that balance high performance for
     a single operation, against the ability to run multiple operations
     concurrently. (Transactions are the high-level, user-visible
     aspect of concurrency. Locks are the low-level mechanism that
     transactions use to avoid reading or writing unreliable data.)


File: manual.info,  Node: innodb-cmp-table,  Next: innodb-cmpmem-table,  Prev: innodb-i_s-tables,  Up: innodb-i_s-tables

20.28.1 The `INFORMATION_SCHEMA INNODB_CMP' and `INNODB_CMP_RESET' Tables
-------------------------------------------------------------------------

The *Note `INNODB_CMP': innodb-cmp-table. and `INNODB_CMP_RESET' tables
contain status information on operations related to compressed `InnoDB'
tables.

*Columns of `INNODB_CMP' and `INNODB_CMP_RESET'*

Column name                   Description
`PAGE_SIZE'                   Compressed
                              page
                              size in
                              bytes.
`COMPRESS_OPS'                Number
                              of
                              times a
                              B-tree
                              page of
                              the
                              size
                              `PAGE_SIZE'
                              has
                              been
                              compressed.
                              Pages
                              are
                              compressed
                              whenever
                              an empty
                              page is
                              created
                              or the
                              space
                              for the
                              uncompressed
                              modification
                              log
                              runs
                              out.
`COMPRESS_OPS_OK'             Number
                              of
                              times a
                              B-tree
                              page of
                              the
                              size
                              `PAGE_SIZE'
                              has
                              been
                              successfully
                              compressed.
                              This
                              count
                              should
                              never
                              exceed
                              `COMPRESS_OPS'.
`COMPRESS_TIME'               Total
                              time in
                              seconds
                              spent
                              in
                              attempts
                              to
                              compress
                              B-tree
                              pages
                              of the
                              size
                              `PAGE_SIZE'.
`UNCOMPRESS_OPS'              Number
                              of
                              times a
                              B-tree
                              page of
                              the
                              size
                              `PAGE_SIZE'
                              has
                              been
                              uncompressed.
                              B-tree
                              pages
                              are
                              uncompressed
                              whenever
                              compression
                              fails
                              or at
                              first
                              access
                              when
                              the
                              uncompressed
                              page
                              does
                              not
                              exist
                              in the
                              buffer
                              pool.
`UNCOMPRESS_TIME'             Total
                              time in
                              seconds
                              spent
                              in
                              uncompressing
                              B-tree
                              pages
                              of the
                              size
                              `PAGE_SIZE'.

*Notes*:

   * Use these tables to measure the effectiveness of `InnoDB' table
     compression in your database.

   * You must have the `PROCESS' privilege to query this table.

   * For usage information, see *Note
     innodb-information-schema-examples-compression-sect::.


File: manual.info,  Node: innodb-cmpmem-table,  Next: innodb-trx-table,  Prev: innodb-cmp-table,  Up: innodb-i_s-tables

20.28.2 The `INFORMATION_SCHEMA INNODB_CMPMEM' and `INNODB_CMPMEM_RESET' Tables
-------------------------------------------------------------------------------

The *Note `INNODB_CMPMEM': innodb-cmpmem-table. and
`INNODB_CMPMEM_RESET' tables contain status information on compressed
pages within the `InnoDB' buffer pool.

*Columns of INNODB_CMPMEM and INNODB_CMPMEM_RESET*

Column name                   Description
`PAGE_SIZE'                   Block
                              size in
                              bytes.
                              Each
                              record
                              of this
                              table
                              describes
                              blocks
                              of this
                              size.
`PAGES_USED'                  Number
                              of
                              blocks
                              of the
                              size
                              `PAGE_SIZE'
                              that are
                              currently
                              in use.
`PAGES_FREE'                  Number
                              of
                              blocks
                              of the
                              size
                              `PAGE_SIZE'
                              that are
                              currently
                              available
                              for
                              allocation.
                              This
                              column
                              shows
                              the
                              external
                              fragmentation
                              in the
                              memory
                              pool.
                              Ideally,
                              these
                              numbers
                              should
                              be at
                              most 1.
`RELOCATION_OPS'              Number
                              of
                              times a
                              block
                              of the
                              size
                              `PAGE_SIZE'
                              has
                              been
                              relocated.
                              The
                              buddy
                              system
                              can
                              relocate
                              the
                              allocated
                              `buddy
                              neighbor'
                              of a
                              freed
                              block
                              when it
                              tries
                              to form
                              a
                              bigger
                              freed
                              block.
                              Reading
                              from
                              the
                              table
                              `INNODB_CMPMEM_RESET'
                              resets
                              this
                              count.
`RELOCATION_TIME'             Total
                              time in
                              microseconds
                              spent
                              in
                              relocating
                              blocks
                              of the
                              size
                              `PAGE_SIZE'.
                              Reading
                              from
                              the
                              table
                              `INNODB_CMPMEM_RESET'
                              resets
                              this
                              count.

*Notes*:

   * Use these tables to measure the effectiveness of `InnoDB' table
     compression in your database.

   * You must have the `PROCESS' privilege to query this table.

   * For usage information, see *Note
     innodb-information-schema-examples-compression-sect::.


File: manual.info,  Node: innodb-trx-table,  Next: innodb-locks-table,  Prev: innodb-cmpmem-table,  Up: innodb-i_s-tables

20.28.3 The `INFORMATION_SCHEMA INNODB_TRX' Table
-------------------------------------------------

The *Note `INNODB_TRX': innodb-trx-table. table contains information
about every transaction currently executing inside `InnoDB', including
whether the transaction is waiting for a lock, when the transaction
started, and the SQL statement the transaction is executing.

*`INNODB_TRX' Columns*

Column  Description
name    
`TRX_ID'Unique
        transaction
        ID number,
        internal to
        `InnoDB'.
        (Starting in
        MySQL 5.6,
        these IDs are
        not created
        for
        transactions
        that are
        read-only and
        non-locking.
        See
        Optimizations
        for Read-Only
        Transactions
        (http://dev.mysql.com/doc/refman/5.6/en/innodb-performance.html#innodb-performance-ro-txn)
        for details.)
`TRX_WEIGHT'The weight of
        a
        transaction,
        reflecting
        (but not
        necessarily
        the exact
        count of) the
        number of
        rows altered
        and the
        number of rows
        locked by the
        transaction.
        To resolve a
        deadlock,
        `InnoDB'
        selects the
        transaction
        with the
        smallest
        weight as the
        `victim' to
        rollback.
        Transactions
        that have
        changed
        non-transactional
        tables are
        considered
        heavier than
        others,
        regardless of
        the number of
        altered and
        locked rows.
`TRX_STATE'Transaction
        execution
        state. One of
        `RUNNING',
        `LOCK WAIT',
        `ROLLING BACK'
        or
        `COMMITTING'.
`TRX_STARTED'Transaction
        start time.
`TRX_REQUESTED_LOCK_ID'ID of the
        lock the
        transaction
        is currently
        waiting for
        (if
        `TRX_STATE'
        is `LOCK
        WAIT',
        otherwise
        `NULL').
        Details about
        the lock can
        be found by
        joining with
        `INNODB_LOCKS'
        on `LOCK_ID'.
`TRX_WAIT_STARTED'Time when the
        transaction
        started
        waiting on
        the lock (if
        `TRX_STATE'
        is `LOCK
        WAIT',
        otherwise
        `NULL').
`TRX_MYSQL_THREAD_ID'MySQL thread
        ID. Can be
        used for
        joining with
        `PROCESSLIST'
        on `ID'. See
        *Note
        innodb-information-schema-note_inconsistency::.
`TRX_QUERY'The SQL query
        that is being
        executed by
        the
        transaction.
`TRX_OPERATION_STATE'The
        transaction's
        current
        operation, or
        `NULL'.
`TRX_TABLES_IN_USE'The number of
        InnoDB tables
        used while
        processing
        the current
        SQL statement
        of this
        transaction.
`TRX_TABLES_LOCKED'Number of
        InnoDB tables
        that the
        current SQL
        statement has
        row locks on.
        (Because
        these are row
        locks, not
        table locks,
        the tables can
        usually still
        be read from
        and written
        to by multiple
        transactions,
        despite some
        rows being
        locked.)
`TRX_LOCK_STRUCTS'The number of
        locks
        reserved by
        the
        transaction.
`TRX_LOCK_MEMORY_BYTES'Total size
        taken up by
        the lock
        structures of
        this
        transaction in
        memory.
`TRX_ROWS_LOCKED'Approximate
        number or
        rows locked
        by this
        transaction.
        The value
        might include
        delete-marked
        rows that are
        physically
        present but
        not visible
        to the
        transaction.
`TRX_ROWS_MODIFIED'The number of
        modified and
        inserted rows
        in this
        transaction.
`TRX_CONCURRENCY_TICKETS'A value
        indicating
        how much work
        the current
        transaction
        can do before
        being swapped
        out, as
        specified by
        the
        `innodb_concurrency_tickets'
        option.
`TRX_ISOLATION_LEVEL'The isolation
        level of the
        current
        transaction.
`TRX_UNIQUE_CHECKS'Whether
        unique checks
        are turned on
        or off for
        the current
        transaction.
        (They might
        be turned off
        during a bulk
        data load, for
        example.)
`TRX_FOREIGN_KEY_CHECKS'Whether
        foreign key
        checks are
        turned on or
        off for the
        current
        transaction.
        (They might
        be turned off
        during a bulk
        data load,
        for example.)
`TRX_LAST_FOREIGN_KEY_ERROR'Detailed
        error message
        for last FK
        error, or
        `NULL'.
`TRX_ADAPTIVE_HASH_LATCHED'Whether or
        not the
        adaptive hash
        index is
        locked by the
        current
        transaction.
        (Only a
        single
        transaction
        at a time can
        modify the
        adaptive hash
        index.)
`TRX_ADAPTIVE_HASH_TIMEOUT'Whether to
        relinquish
        the search
        latch
        immediately
        for the
        adaptive hash
        index, or
        reserve it
        across calls
        from MySQL.
        When there is
        no AHI
        contention,
        this value
        remains zero
        and
        statements
        reserve the
        latch until
        they finish.
        During times
        of
        contention, it
        counts down
        to zero, and
        statements
        release the
        latch
        immediately
        after each
        row lookup.
`TRX_IS_READ_ONLY'A value of 1
        indicates the
        transaction
        is read-only.
        (5.6.4 and
        up.)
`TRX_AUTOCOMMIT_NON_LOCKING'A value of 1
        indicates the
        transaction
        is a `SELECT'
        statement
        that does not
        use the `FOR
        UPDATE' or
        `LOCK IN
        SHARED MODE'
        clauses, and
        is executing
        with the
        `autocommit'
        setting
        turned on so
        that the
        transaction
        will only
        contain this
        one
        statement.
        (5.6.4 and
        up.) When
        this column
        and
        `TRX_IS_READ_ONLY'
        are both 1,
        `InnoDB'
        optimizes the
        transaction to
        reduce the
        overhead
        associated
        with
        transactions
        that change
        table data.

*Notes*:

   * Use this table to help diagnose performance problems that occur
     during times of heavy concurrent load. Its contents are updated as
     described in *Note
     innodb-information-schema-rapidly_changing_internal_data::.

   * You must have the `PROCESS' privilege to query this table.

   * For usage information, see *Note
     innodb-information-schema-examples::.


File: manual.info,  Node: innodb-locks-table,  Next: innodb-lock-waits-table,  Prev: innodb-trx-table,  Up: innodb-i_s-tables

20.28.4 The `INFORMATION_SCHEMA INNODB_LOCKS' Table
---------------------------------------------------

The *Note `INNODB_LOCKS': innodb-locks-table. table contains
information about each lock that an `InnoDB' transaction has requested
but not yet acquired, and each lock that a transaction holds that is
blocking another transaction.

*`INNODB_LOCKS' Columns*

Column  Description
name    
`LOCK_ID'Unique lock ID number,
        internal to `InnoDB'. Treat
        it as an opaque string.
        Although `LOCK_ID' currently
        contains `TRX_ID', the
        format of the data in
        `LOCK_ID' is not guaranteed
        to remain the same in future
        releases. Do not write
        programs that parse the
        `LOCK_ID' value.
`LOCK_TRX_ID'ID of the transaction
        holding this lock. Details
        about the transaction can be
        found by joining with
        `INNODB_TRX' on `TRX_ID'.
`LOCK_MODE'Mode of the lock. One of
        `S', `X', `IS', `IX',
        `S_GAP', `X_GAP', `IS_GAP',
        `IX_GAP', or `AUTO_INC' for
        shared, exclusive, intention
        shared, intention exclusive
        row locks, shared and
        exclusive gap locks,
        intention shared and
        intention exclusive gap
        locks, and auto-increment
        table level lock,
        respectively. Refer to the
        sections *Note
        innodb-lock-modes:: and
        *Note
        innodb-transaction-model::
        for information on `InnoDB'
        locking.
`LOCK_TYPE'Type of the lock. One of
        `RECORD' or `TABLE' for
        record (row) level or table
        level locks, respectively.
`LOCK_TABLE'Name of the table that has
        been locked or contains
        locked records.
`LOCK_INDEX'Name of the index if
        `LOCK_TYPE='RECORD'',
        otherwise `NULL'.
`LOCK_SPACE'Tablespace ID of the locked
        record if
        `LOCK_TYPE='RECORD'',
        otherwise `NULL'.
`LOCK_PAGE'Page number of the locked
        record if
        `LOCK_TYPE='RECORD'',
        otherwise `NULL'.
`LOCK_REC'Heap number of the locked
        record within the page if
        `LOCK_TYPE='RECORD'',
        otherwise `NULL'.
`LOCK_DATA'Primary key of the locked
        record if
        `LOCK_TYPE='RECORD'',
        otherwise `NULL'. This
        column contains the value(s)
        of the primary key column(s)
        in the locked row, formatted
        as a valid SQL string (ready
        to be copied to SQL
        commands). If there is no
        primary key then the `InnoDB'
        internal unique row ID
        number is used. When the page
        containing the locked record
        is not in the buffer pool
        (in the case that it was
        paged out to disk while the
        lock was held), `InnoDB'
        does not fetch the page from
        disk, to avoid unnecessary
        disk operations. Instead,
        `LOCK_DATA' is set to `NULL'.

*Notes*:

   * Use this table to help diagnose performance problems that occur
     during times of heavy concurrent load. Its contents are updated as
     described in *Note
     innodb-information-schema-rapidly_changing_internal_data::.

   * You must have the `PROCESS' privilege to query this table.

   * For usage information, see *Note
     innodb-information-schema-examples::.


File: manual.info,  Node: innodb-lock-waits-table,  Next: innodb-buffer-page-table,  Prev: innodb-locks-table,  Up: innodb-i_s-tables

20.28.5 The `INFORMATION_SCHEMA INNODB_LOCK_WAITS' Table
--------------------------------------------------------

The *Note `INNODB_LOCK_WAITS': innodb-lock-waits-table. table contains
one or more rows for each blocked `InnoDB' transaction, indicating the
lock it has requested and any locks that are blocking that request.

*`INNODB_LOCK_WAITS' Columns*

Column name            Description
`REQUESTING_TRX_ID'    ID of the requesting transaction.
`REQUESTED_LOCK_ID'    ID of the lock for which a transaction is waiting.
                       Details about the lock can be found by joining with
                       `INNODB_LOCKS' on `LOCK_ID'.
`BLOCKING_TRX_ID'      ID of the blocking transaction.
`BLOCKING_LOCK_ID'     ID of a lock held by a transaction blocking another
                       transaction from proceeding. Details about the lock can
                       be found by joining with `INNODB_LOCKS' on `LOCK_ID'.

*Notes*:

   * Use this table to help diagnose performance problems that occur
     during times of heavy concurrent load. Its contents are updated as
     described in *Note
     innodb-information-schema-rapidly_changing_internal_data::.

   * You must have the `PROCESS' privilege to query this table.

   * For usage information, see *Note
     innodb-information-schema-examples::.


File: manual.info,  Node: innodb-buffer-page-table,  Next: innodb-buffer-page-lru-table,  Prev: innodb-lock-waits-table,  Up: innodb-i_s-tables

20.28.6 The `INFORMATION_SCHEMA INNODB_BUFFER_PAGE' Table
---------------------------------------------------------

The `INNODB_BUFFER_PAGE' table holds information about each page in the
`InnoDB' buffer pool.

*`INNODB_BUFFER_PAGE' Columns*

Column name            Description
`POOL_ID'              Buffer Pool ID. An identifier to distinguish between
                       multiple buffer pool instances.
`BLOCK_ID'             Buffer Pool Block ID.
`SPACE'                Tablespace ID. Uses the same value as in
                       `INNODB_SYS_TABLES.SPACE'.
`PAGE_NUMBER'          Page number.
`PAGE_TYPE'            Page type string. One of `allocated' (Freshly allocated
                       page), `index' (B-tree node), `undo_log' (Undo log page),
                       `inode' (Index node), `ibuf_free_list' (Insert buffer free
                       list), `ibuf_bitmap' (Insert buffer bitmap), `system'
                       (System page), `trx_system' (Transaction system data),
                       `file_space_header' (File space header),
                       `extent_descriptor' (Extent descriptor page), `blob'
                       (Uncompressed BLOB page), `compressed_blob' (First
                       compressed BLOB page), `compressed_blob2' (Subsequent
                       comp BLOB page), `unknown' (unknown).
`FLUSH_TYPE'           Flush type.
`FIX_COUNT'            Number of threads using this block within the buffer
                       pool. When zero, the block is eligible to be evicted.
`IS_HASHED'            Whether hash index has been built on this page.
`NEWEST_MODIFICATION'  Log Sequence Number of the youngest modification.
`OLDEST_MODIFICATION'  Log Sequence Number of the oldest modification.
`ACCESS_TIME'          An abstract number used to judge the first access time of
                       the page.
`TABLE_NAME'           Name of the table the page belongs to.
`INDEX_NAME'           Name of the index the page belongs to. It can be the name
                       of a clustered index or a secondary index.
`NUMBER_RECORDS'       Number of records within the page.
`DATA_SIZE'            Sum of the sizes of the records.
`COMPRESSED_SIZE'      Compressed page size. Null for pages that are not
                       compressed.
`PAGE_STATE'           Page state. A page with valid data has one of the
                       following states: `FILE_PAGE' (buffers a page of data from
                       a file), `MEMORY' (buffers a page from an in-memory
                       object),
                       
                       Other possible states (managed by `InnoDB') are: null,
                       `READY_FOR_USE', `NOT_USED', `REMOVE_HASH'.
`IO_FIX'               Specifies whether any I/O is pending for this page:
                       `IO_NONE' = no pending I/O, `IO_READ' = read pending,
                       `IO_WRITE' = write pending.
`IS_OLD'               bpage->old.
`FREE_PAGE_CLOCK'      bpage->freed_page_clock.

*Notes*:

   * This table is primarily useful for expert-level performance
     monitoring, or when developing performance-related extensions for
     MySQL.

   * Since the `INFORMATION_SCHEMA' is a general-purpose way to monitor
     the MySQL server, use this table rather than the corresponding
     `InnoDB' system table for any new monitoring application you
     develop.

   * You must have the `PROCESS' privilege to query this table.


File: manual.info,  Node: innodb-buffer-page-lru-table,  Next: innodb-buffer-pool-stats-table,  Prev: innodb-buffer-page-table,  Up: innodb-i_s-tables

20.28.7 The `INFORMATION_SCHEMA INNODB_BUFFER_PAGE_LRU' Table
-------------------------------------------------------------

The `INNODB_BUFFER_PAGE_LRU' table holds information about the pages in
the `InnoDB' buffer pool, in particular how they are ordered that
determines which pages to evict from the buffer pool when it becomes
full.

The definition for this page is the same as for *Note
`INNODB_BUFFER_PAGE': innodb-buffer-page-table, except this table has
an `LRU_POSITION' column instead of `BLOCK_ID'.

* Notes: *

   * This table is primarily useful for expert-level performance
     monitoring, or when developing performance-related extensions for
     MySQL.

     Since the `INFORMATION_SCHEMA' is a general-purpose way to monitor
     the MySQL server, use this table rather than the corresponding
     `InnoDB' system table for any new monitoring application you
     develop.

   * Querying this table can require MySQL to allocate a large block of
     contiguous memory, more than 64 bytes time the number of active
     pages in the buffer pool. This allocation could potentially cause
     an out-of-memory error, especially for systems with multi-gigabyte
     buffer pools.

   * Querying this table requires MySQL to lock the data structure
     representing the buffer pool while traversing the LRU list, which
     can reduce concurrency, especially for systems with multi-gigabyte
     buffer pools.


File: manual.info,  Node: innodb-buffer-pool-stats-table,  Prev: innodb-buffer-page-lru-table,  Up: innodb-i_s-tables

20.28.8 The `INFORMATION_SCHEMA INNODB_BUFFER_POOL_STATS' Table
---------------------------------------------------------------

The `INNODB_BUFFER_POOL_STATS' table represents the same kinds of
`InnoDB' buffer pool information as the output from `SHOW ENGINE INNODB
STATUS'.

The idea of making pages in the buffer pool `young' or `not young'
refers to transferring them between the sublists at the head and tail
of the buffer pool data structure. Pages made `young' take longer to
age out of the buffer pool, while pages made `not young' are moved much
closer to the point of eviction.

Column meanings in this table are intended to be self-explanatory for
developers who formerly parsed the *Note `SHOW ENGINE INNODB STATUS':
show-engine. to get these values.

*`INNODB_BUFFER_POOL_STATS' Columns*

Column name            Description
`POOL_ID'              
`POOL_SIZE'            
`FREE_BUFFERS'         
`DATABASE_PAGES'       
`OLD_DATABASE_PAGES'   
`MODIFIED_DATABASE_PAGES'
`PENDING_DECOMPRESS'   
`PENDING_READS'        
`PENDING_FLUSH_LRU'    
`PENDING_FLUSH_LIST'   
`PAGES_MADE_YOUNG'     
`PAGES_NOT_MADE_YOUNG' 
`PAGES_MADE_YOUNG_RATE'
`PAGES_MADE_NOT_YOUNG_RATE'
`NUMBER_PAGES_READ'    
`NUMBER_PAGES_CREATED' 
`NUMBER_PAGES_WRITTEN' 
`PAGES_READ_RATE'      
`PAGES_CREATE_RATE'    
`PAGES_WRITTEN_RATE'   
`NUMBER_PAGES_GET'     
`HIT_RATE'             
`YOUNG_MAKE_PER_THOUSAND_GETS'
`NOT_YOUNG_MAKE_PER_THOUSAND_GETS'
`NUMBER_PAGES_READ_AHEAD'
`NUMBER_READ_AHEAD_EVICTED'
`READ_AHEAD_RATE'      
`REAT_AHEAD_EVICTED_RATE'
`LRU_IO_TOTAL'         
`LRU_IO_CURRENT'       
`UNCOMPRESS_TOTAL'     
`UNCOMPRESS_CURRENT'   

*Notes*:

   * This table is primarily useful for expert-level performance
     monitoring, or when developing performance-related extensions for
     MySQL.

   * Since the `INFORMATION_SCHEMA' is a general-purpose way to monitor
     the MySQL server, use this table rather than the corresponding
     `InnoDB' system table for any new monitoring application you
     develop.

   * You must have the `PROCESS' privilege to query this table.


File: manual.info,  Node: mysql-cluster-i_s-tables,  Next: thread-pool-i_s-tables,  Prev: innodb-i_s-tables,  Up: information-schema

20.29 `INFORMATION_SCHEMA' Tables for MySQL Cluster
===================================================

* Menu:

* files-table::                  The `INFORMATION_SCHEMA FILES' Table
* ndb-transid-mysql-connection-map-table::  The `INFORMATION_SCHEMA ndb_transid_mysql_connection_map' Table

The following sections provide information about `INFORMATION_SCHEMA'
tables which are specific to MySQL Cluster. The *Note `FILES':
files-table. table was added in MySQL Server 5.1.6 as part of MySQL
Cluster data-on-disk support (it is available in standard MySQL 5.5 but
is not used there). The *Note `ndb_transid_mysql_connection_map':
ndb-transid-mysql-connection-map-table. table was added as part of
additions made to MySQL Cluster's *Note `ndbinfo':
mysql-cluster-ndbinfo. information database in MySQL Cluster NDB 7.2.2;
it is implemented as an `INFORMATION_SCHEMA' plugin available only in
MySQL Cluster binaries or source, and does not exist in MySQL Server
5.5.

Additional statistical and other data about MySQL Cluster transactions,
operations, threads, blocks, and other aspects of performance can be
obtained from the tables in the *Note `ndbinfo': mysql-cluster-ndbinfo.
database. Information about these tables, see *Note
mysql-cluster-ndbinfo::.


File: manual.info,  Node: files-table,  Next: ndb-transid-mysql-connection-map-table,  Prev: mysql-cluster-i_s-tables,  Up: mysql-cluster-i_s-tables

20.29.1 The `INFORMATION_SCHEMA FILES' Table
--------------------------------------------

The *Note `FILES': files-table. table provides information about the
files in which MySQL *Note `NDB': mysql-cluster.  Disk Data tables are
stored.

*Note*:

This table provides information about Disk Data _files_ only; you
cannot use it for determining disk space allocation or availability for
individual `NDB' tables. However, it is possible to see how much space
is allocated for each *Note `NDB': mysql-cluster. table having data
stored on disk--as well as how much remains available for storage of
data on disk for that table--using *Note `ndb_desc':
mysql-cluster-programs-ndb-desc. For more information, see *Note
mysql-cluster-programs-ndb-desc::.

This table describes the `INFORMATION_SCHEMA FILES' table. The table
lists `INFORMATION_SCHEMA' names along with the corresponding *Note
`SHOW': show. names (if applicable), and remarks.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`FILE_ID'                                            MySQL extension
`FILE_NAME'                                          MySQL extension
`FILE_TYPE'                                          MySQL extension
`TABLESPACE_NAME'                                    MySQL extension
`TABLE_CATALOG'                                      MySQL extension
`TABLE_SCHEMA'                                       MySQL extension
`TABLE_NAME'                                         MySQL extension
`LOGFILE_GROUP_NAME'                                 MySQL extension
`LOGFILE_GROUP_NUMBER'                               MySQL extension
`ENGINE'                                             MySQL extension
`FULLTEXT_KEYS'                                      MySQL extension
`DELETED_ROWS'                                       MySQL extension
`UPDATE_COUNT'                                       MySQL extension
`FREE_EXTENTS'                                       MySQL extension
`TOTAL_EXTENTS'                                      MySQL extension
`EXTENT_SIZE'                                        MySQL extension
`INITIAL_SIZE'                                       MySQL extension
`MAXIMUM_SIZE'                                       MySQL extension
`AUTOEXTEND_SIZE'                                    MySQL extension
`CREATION_TIME'                                      MySQL extension
`LAST_UPDATE_TIME'                                   MySQL extension
`LAST_ACCESS_TIME'                                   MySQL extension
`RECOVER_TIME'                                       MySQL extension
`TRANSACTION_COUNTER'                                MySQL extension
`VERSION'                                            MySQL extension
`ROW_FORMAT'                                         MySQL extension
`TABLE_ROWS'                                         MySQL extension
`AVG_ROW_LENGTH'                                     MySQL extension
`DATA_LENGTH'                                        MySQL extension
`MAX_DATA_LENGTH'                                    MySQL extension
`INDEX_LENGTH'                                       MySQL extension
`DATA_FREE'                                          MySQL extension
`CREATE_TIME'                                        MySQL extension
`UPDATE_TIME'                                        MySQL extension
`CHECK_TIME'                                         MySQL extension
`CHECKSUM'                                           MySQL extension
`STATUS'                                             MySQL extension
`EXTRA'                                              MySQL extension

*Notes*:

   * `FILE_ID' column values are auto-generated.

   * `FILE_NAME' is the name of an `UNDO' log file created by *Note
     `CREATE LOGFILE GROUP': create-logfile-group. or *Note `ALTER
     LOGFILE GROUP': alter-logfile-group, or of a data file created by
     *Note `CREATE TABLESPACE': create-tablespace. or *Note `ALTER
     TABLESPACE': alter-tablespace.

   * `FILE_TYPE' is one of the values `UNDOFILE', `DATAFILE', or
     `TABLESPACE'.

   * `TABLESPACE_NAME' is the name of the tablespace with which the
     file is associated.

   * Currently, the value of the `TABLESPACE_CATALOG' column is always
     `NULL'.

   * `TABLE_NAME' is the name of the Disk Data table with which the
     file is associated, if any.

   * The `LOGFILE_GROUP_NAME' column gives the name of the log file
     group to which the log file or data file belongs.

   * For an `UNDO' log file, the `LOGFILE_GROUP_NUMBER' contains the
     auto-generated ID number of the log file group to which the log
     file belongs.

   * For a MySQL Cluster Disk Data log file or data file, the value of
     the `ENGINE' column is always *Note `NDB': mysql-cluster. or *Note
     `NDBCLUSTER': mysql-cluster.

   * For a MySQL Cluster Disk Data log file or data file, the value of
     the `FULLTEXT_KEYS' column is always empty.

   * The `FREE EXTENTS' column displays the number of extents which
     have not yet been used by the file. The `TOTAL EXTENTS' column
     show the total number of extents allocated to the file.

     The difference between these two columns is the number of extents
     currently in use by the file:

          SELECT TOTAL_EXTENTS - FREE_EXTENTS AS extents_used
              FROM INFORMATION_SCHEMA.FILES
              WHERE FILE_NAME = 'myfile.dat';

     You can approximate the amount of disk space in use by the file by
     multiplying this difference by the value of the `EXTENT_SIZE'
     column, which gives the size of an extent for the file in bytes:

          SELECT (TOTAL_EXTENTS - FREE_EXTENTS) * EXTENT_SIZE AS bytes_used
              FROM INFORMATION_SCHEMA.FILES
              WHERE FILE_NAME = 'myfile.dat';

     Similarly, you can estimate the amount of space that remains
     available in a given file by multiplying `FREE_EXTENTS' by
     `EXTENT_SIZE':

          SELECT FREE_EXTENTS * EXTENT_SIZE AS bytes_free
              FROM INFORMATION_SCHEMA.FILES
              WHERE FILE_NAME = 'myfile.dat';

     *Important*:

     The byte values produced by the preceding queries are
     approximations only, and their precision is inversely proportional
     to the value of `EXTENT_SIZE'.  That is, the larger `EXTENT_SIZE'
     becomes, the less accurate the approximations are.

     It is also important to remember that once an extent is used, it
     cannot be freed again without dropping the data file of which it
     is a part. This means that deletes from a Disk Data table do _not_
     release disk space.

     The extent size can be set in a *Note `CREATE TABLESPACE':
     create-tablespace. statement. See *Note create-tablespace::, for
     more information.

   * The `INITIAL_SIZE' column shows the size in bytes of the file.
     This is the same value that was used in the `INITIAL_SIZE' clause
     of the *Note `CREATE LOGFILE GROUP': create-logfile-group, *Note
     `ALTER LOGFILE GROUP': alter-logfile-group, *Note `CREATE
     TABLESPACE': create-tablespace, or *Note `ALTER TABLESPACE':
     alter-tablespace. statement used to create the file.

     For MySQL Cluster Disk Data files, the value of the `MAXIMUM_SIZE'
     column is always the same as `INITIAL_SIZE', and the
     `AUTOEXTEND_SIZE' column is always empty.

   * The `CREATION_TIME' column shows the date and time when the file
     was created. The `LAST_UPDATE_TIME' column displays the date and
     time when the file was last modified. The `LAST_ACCESSED' column
     provides the date and time when the file was last accessed by the
     server.

     Currently, the values of these columns are as reported by the
     operating system, and are not supplied by the *Note `NDB':
     mysql-cluster. storage engine. Where no value is provided by the
     operating system, these columns display `0000-00-00 00:00:00'.

   * For MySQL Cluster Disk Data files, the value of the `RECOVER_TIME'
     and `TRANSACTION_COUNTER' columns is always `0'.

   * For MySQL Cluster Disk Data files, the following columns are
     always `NULL':

        * `VERSION'

        * `ROW_FORMAT'

        * `TABLE_ROWS'

        * `AVG_ROW_LENGTH'

        * `DATA_LENGTH'

        * `MAX_DATA_LENGTH'

        * `INDEX_LENGTH'

        * `DATA_FREE'

        * `CREATE_TIME'

        * `UPDATE_TIME'

        * `CHECK_TIME'

        * `CHECKSUM'

   * For MySQL Cluster Disk Data files, the value of the `STATUS'
     column is always `NORMAL'.

   * For MySQL Cluster Disk Data files, the `EXTRA' column shows which
     data node the file belongs to, as each data node has its own copy
     of the file.  Suppose that you use this statement on a MySQL
     Cluster with four data nodes:

          CREATE LOGFILE GROUP mygroup
              ADD UNDOFILE 'new_undo.dat'
              INITIAL_SIZE 2G
              ENGINE NDB;

     After running the *Note `CREATE LOGFILE GROUP':
     create-logfile-group. statement successfully, you should see a
     result similar to the one shown here for this query against the
     *Note `FILES': files-table. table:

          mysql> SELECT LOGFILE_GROUP_NAME, FILE_TYPE, EXTRA
              ->     FROM INFORMATION_SCHEMA.FILES
              ->     WHERE FILE_NAME = 'new_undo.dat';
          +--------------------+-------------+----------------+
          | LOGFILE_GROUP_NAME | FILE_TYPE   | EXTRA          |
          +--------------------+-------------+----------------+
          | mygroup            | UNDO FILE   | CLUSTER_NODE=3 |
          | mygroup            | UNDO FILE   | CLUSTER_NODE=4 |
          | mygroup            | UNDO FILE   | CLUSTER_NODE=5 |
          | mygroup            | UNDO FILE   | CLUSTER_NODE=6 |
          +--------------------+-------------+----------------+
          4 rows in set (0.01 sec)

   * The *Note `FILES': files-table. table is a nonstandard table.

   * An additional row is present in the *Note `FILES': files-table.
     table following the creation of a logfile group. This row has
     `NULL' for the value of the `FILE_NAME' column. For this row, the
     value of the `FILE_ID' column is always `0', that of the
     `FILE_TYPE' column is always `UNDO FILE', and that of the `STATUS'
     column is always `NORMAL'. Currently, the value of the `ENGINE'
     column is always *Note `NDBCLUSTER': mysql-cluster.

     The `FREE_EXTENTS' column in this row shows the total number of
     free extents available to all undo files belonging to a given log
     file group whose name and number are shown in the
     `LOGFILE_GROUP_NAME' and `LOGFILE_GROUP_NUMBER' columns,
     respectively.

     Suppose there are no existing log file groups on your MySQL
     Cluster, and you create one using the following statement:

          mysql> CREATE LOGFILE GROUP lg1
              ->   ADD UNDOFILE 'undofile.dat'
              ->   INITIAL_SIZE = 16M
              ->   UNDO_BUFFER_SIZE = 1M
              ->   ENGINE = NDB;
          Query OK, 0 rows affected (3.81 sec)

     You can now see this `NULL' row when you query the *Note `FILES':
     files-table. table:

          mysql> SELECT DISTINCT
              ->   FILE_NAME AS File,
              ->   FREE_EXTENTS AS Free,
              ->   TOTAL_EXTENTS AS Total,
              ->   EXTENT_SIZE AS Size,
              ->   INITIAL_SIZE AS Initial
              ->   FROM INFORMATION_SCHEMA.FILES;
          +--------------+---------+---------+------+----------+
          | File         | Free    | Total   | Size | Initial  |
          +--------------+---------+---------+------+----------+
          | undofile.dat |    NULL | 4194304 |    4 | 16777216 |
          | NULL         | 4184068 |    NULL |    4 |     NULL |
          +--------------+---------+---------+------+----------+
          2 rows in set (0.01 sec)

     The total number of free extents available for undo logging is
     always somewhat less than the sum of the `TOTAL_EXTENTS' column
     values for all undo files in the log file group due to overhead
     required for maintaining the undo files. This can be seen by
     adding a second undo file to the log file group, then repeating the
     previous query against the *Note `FILES': files-table.  table:

          mysql> ALTER LOGFILE GROUP lg1
              ->   ADD UNDOFILE 'undofile02.dat'
              ->   INITIAL_SIZE = 4M
              ->   ENGINE = NDB;
          Query OK, 0 rows affected (1.02 sec)

          mysql> SELECT DISTINCT
              ->   FILE_NAME AS File,
              ->   FREE_EXTENTS AS Free,
              ->   TOTAL_EXTENTS AS Total,
              ->   EXTENT_SIZE AS Size,
              ->   INITIAL_SIZE AS Initial
              ->   FROM INFORMATION_SCHEMA.FILES;
          +----------------+---------+---------+------+----------+
          | File           | Free    | Total   | Size | Initial  |
          +----------------+---------+---------+------+----------+
          | undofile.dat   |    NULL | 4194304 |    4 | 16777216 |
          | undofile02.dat |    NULL | 1048576 |    4 |  4194304 |
          | NULL           | 5223944 |    NULL |    4 |     NULL |
          +----------------+---------+---------+------+----------+
          3 rows in set (0.01 sec)

     The amount of free space in bytes which is available for undo
     logging by Disk Data tables using this log file group can be
     approximated by multiplying the number of free extents by the
     initial size:

          mysql> SELECT
              ->   FREE_EXTENTS AS 'Free Extents',
              ->   FREE_EXTENTS * EXTENT_SIZE AS 'Free Bytes'
              ->   FROM INFORMATION_SCHEMA.FILES
              ->   WHERE LOGFILE_GROUP_NAME = 'lg1'
              ->   AND FILE_NAME IS NULL;
          +--------------+------------+
          | Free Extents | Free Bytes |
          +--------------+------------+
          |      5223944 |   20895776 |
          +--------------+------------+
          1 row in set (0.02 sec)

     If you create a MySQL Cluster Disk Data table and then insert some
     rows into it, you can see approximately how much space remains for
     undo logging afterward, for example:

          mysql> CREATE TABLESPACE ts1
              ->   ADD DATAFILE 'data1.dat'
              ->   USE LOGFILE GROUP lg1
              ->   INITIAL_SIZE 512M
              ->   ENGINE = NDB;
          Query OK, 0 rows affected (8.71 sec)

          mysql> CREATE TABLE dd (
              ->   c1 INT NOT NULL PRIMARY KEY,
              ->   c2 INT,
              ->   c3 DATE
              ->   )
              ->   TABLESPACE ts1 STORAGE DISK
              ->   ENGINE = NDB;
          Query OK, 0 rows affected (2.11 sec)

          mysql> INSERT INTO dd VALUES
              ->   (NULL, 1234567890, '2007-02-02'),
              ->   (NULL, 1126789005, '2007-02-03'),
              ->   (NULL, 1357924680, '2007-02-04'),
              ->   (NULL, 1642097531, '2007-02-05');
          Query OK, 4 rows affected (0.01 sec)

          mysql> SELECT
              ->   FREE_EXTENTS AS 'Free Extents',
              ->   FREE_EXTENTS * EXTENT_SIZE AS 'Free Bytes'
              ->   FROM INFORMATION_SCHEMA.FILES
              ->   WHERE LOGFILE_GROUP_NAME = 'lg1'
              ->   AND FILE_NAME IS NULL;
          +--------------+------------+
          | Free Extents | Free Bytes |
          +--------------+------------+
          |      5207565 |   20830260 |
          +--------------+------------+
          1 row in set (0.01 sec)

   * An additional row is present in the *Note `FILES': files-table.
     table for any MySQL Cluster tablespace, whether or not any data
     files are associated with the tablespace. This row has `NULL' for
     the value of the `FILE_NAME' column. For this row, the value of
     the `FILE_ID' column is always `0', that of the `FILE_TYPE' column
     is always `TABLESPACE', and that of the `STATUS' column is always
     `NORMAL'. Currently, the value of the `ENGINE' column is always
     *Note `NDBCLUSTER': mysql-cluster.

   * There are no *Note `SHOW': show. statements associated with the
     *Note `FILES': files-table. table.

   * For additional information, and examples of creating and dropping
     MySQL Cluster Disk Data objects, see *Note
     mysql-cluster-disk-data::.


File: manual.info,  Node: ndb-transid-mysql-connection-map-table,  Prev: files-table,  Up: mysql-cluster-i_s-tables

20.29.2 The `INFORMATION_SCHEMA ndb_transid_mysql_connection_map' Table
-----------------------------------------------------------------------

The `ndb_transid_mysql_connection_map' table provides a mapping between
`NDB' transactions, `NDB' transaction coordinators, and MySQL Servers
attached to a MySQL Cluster as API nodes. This information is used when
populating the *Note `server_operations':
mysql-cluster-ndbinfo-server-operations. and *Note
`server_transactions': mysql-cluster-ndbinfo-server-transactions.
tables of the *Note `ndbinfo': mysql-cluster-ndbinfo. MySQL Cluster
information database.

This table describes the `INFORMATION_SCHEMA
ndb_transid_mysql_connection_map' table. The table lists
`INFORMATION_SCHEMA' names along with corresponding *Note `SHOW': show.
names (if applicable), and remarks.

`INFORMATION_SCHEMA' Name     *Note `SHOW': show.    Remarks
                              Name                   
`mysql_connection_id'                                MySQL Server
                                                     connection ID
`node_id'                                            Transaction
                                                     coordinator node ID
`ndb_transid'                                        *Note `NDB':
                                                     mysql-cluster.
                                                     transaction ID

The `mysql_connection_id' is the same as the connection or session ID
shown in the output of *Note `SHOW PROCESSLIST': show-processlist.

There are no `SHOW' statements associated with this table.

This is a nonstandard table, added in MySQL Cluster NDB 7.2.2. It is
implemented as an `INFORMATION_SCHEMA' plugin; you can verify that it
is supported by checking the output of *Note `SHOW PLUGINS':
show-plugins. If `ndb_transid_mysql_connection_map' support is enabled,
the output from this statement includes a plugin having this name, of
type `INFORMATION SCHEMA', and having status `ACTIVE', as shown here
(using emphasized text):

     mysql> SHOW PLUGINS;
     +----------------------------------+--------+--------------------+---------+---------+
     | Name                             | Status | Type               | Library | License |
     +----------------------------------+--------+--------------------+---------+---------+
     | binlog                           | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | mysql_native_password            | ACTIVE | AUTHENTICATION     | NULL    | GPL     |
     | mysql_old_password               | ACTIVE | AUTHENTICATION     | NULL    | GPL     |
     | CSV                              | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | MEMORY                           | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | MRG_MYISAM                       | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | MyISAM                           | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | PERFORMANCE_SCHEMA               | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | BLACKHOLE                        | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | ARCHIVE                          | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | ndbcluster                       | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | ndbinfo                          | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     _| ndb_transid_mysql_connection_map | ACTIVE | INFORMATION SCHEMA | NULL    | GPL     |_
     | InnoDB                           | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     | INNODB_TRX                       | ACTIVE | INFORMATION SCHEMA | NULL    | GPL     |
     | INNODB_LOCKS                     | ACTIVE | INFORMATION SCHEMA | NULL    | GPL     |
     | INNODB_LOCK_WAITS                | ACTIVE | INFORMATION SCHEMA | NULL    | GPL     |
     | INNODB_CMP                       | ACTIVE | INFORMATION SCHEMA | NULL    | GPL     |
     | INNODB_CMP_RESET                 | ACTIVE | INFORMATION SCHEMA | NULL    | GPL     |
     | INNODB_CMPMEM                    | ACTIVE | INFORMATION SCHEMA | NULL    | GPL     |
     | INNODB_CMPMEM_RESET              | ACTIVE | INFORMATION SCHEMA | NULL    | GPL     |
     | partition                        | ACTIVE | STORAGE ENGINE     | NULL    | GPL     |
     +----------------------------------+--------+--------------------+---------+---------+
     22 rows in set (0.00 sec)

The plugin is enabled by default. You can disable it (or force the
server not to run unless the plugin starts) by starting the server with
the `--ndb-transid-mysql-connection-map' option. If the plugin is
disabled, the status is shown by *Note `SHOW PLUGINS': show-plugins. as
`DISABLED'. The plugin cannot be enabled or disabled at runtime.

Although the names of this table and its columns are displayed using
lowercase, you can use uppercase or lowercase when referring to them in
SQL statements.

For this table to be created, the MySQL Server must be a binary that
wass supplied with the MySQL Cluster distribution, or one that was
built from the MySQL Cluster sources with *Note `NDB': mysql-cluster.
storage engine support enabled.  It is not available in the standard
MySQL 5.5 Server.


File: manual.info,  Node: thread-pool-i_s-tables,  Next: extended-show,  Prev: mysql-cluster-i_s-tables,  Up: information-schema

20.30 Thread Pool `INFORMATION_SCHEMA' Tables
=============================================

* Menu:

* tp-thread-state-table::        The `INFORMATION_SCHEMA TP_THREAD_STATE' Table
* tp-thread-group-state-table::  The `INFORMATION_SCHEMA TP_THREAD_GROUP_STATE' Table
* tp-thread-group-stats-table::  The `INFORMATION_SCHEMA TP_THREAD_GROUP_STATS' Table

The following sections describe the `INFORMATION_SCHEMA' tables
associated with the thread pool plugin. They provide information about
thread pool operation:

   * *Note `TP_THREAD_STATE': tp-thread-state-table.: Information about
     thread pool thread states

   * *Note `TP_THREAD_GROUP_STATE': tp-thread-group-state-table.:
     Information about thread pool thread group states

   * *Note `TP_THREAD_GROUP_STATS': tp-thread-group-stats-table.:
     Thread group statistics

Rows in these tables represent snapshots in time. In the case of *Note
`TP_THREAD_STATE': tp-thread-state-table, all rows for a thread group
comprise a snapshot in time. Thus, the MySQL server holds the mutex of
the thread group while producing the snapshot. But it does not hold
mutexes on all thread groups at the same time, to prevent a statement
against *Note `TP_THREAD_STATE': tp-thread-state-table. from blocking
the entire MySQL server.

The thread pool `INFORMATION_SCHEMA' tables are implemented by
individual plugins and the decision whether to load one can be made
independently of the others (see *Note thread-pool-installation::).
However, the content of all the tables depends on the thread pool
plugin being enabled. If a table plugin is enabled but the thread pool
plugin is not, the table becomes visible and can be accessed but will
be empty.


File: manual.info,  Node: tp-thread-state-table,  Next: tp-thread-group-state-table,  Prev: thread-pool-i_s-tables,  Up: thread-pool-i_s-tables

20.30.1 The `INFORMATION_SCHEMA TP_THREAD_STATE' Table
------------------------------------------------------

This table has one row per thread created by the thread pool to handle
connections. The table has these columns:

   * `TP_GROUP_ID'

     The thread group ID.

   * `TP_THREAD_NUMBER'

     The ID of the thread within its thread group.  `TP_GROUP_ID' and
     `TP_THREAD_NUMBER' together provide a unique key within the table.

   * `PROCESS_COUNT'

     The 10ms interval in which the statement that uses this thread is
     currently executing. 0 means no statement is executing, 1 means it
     is in the first 10ms, and so forth.

   * `WAIT_TYPE'

     The type of wait for the thread. `NULL' means the thread is not
     blocked. Otherwise, the thread is blocked by a call to
     `thd_wait_begin()' and the value specifies the type of wait. The
     `XXX_WAIT' columns of the *Note `TP_THREAD_GROUP_STATS':
     tp-thread-group-stats-table.  table accumulate counts for each
     wait type.

     The `WAIT_TYPE' value is a string that describes the type of wait,
     as shown in the following table.

     *`WAIT_TYPE' Values*

     Wait Type               Meaning
     `THD_WAIT_SLEEP'        Waiting for sleep
     `THD_WAIT_DISKIO'       Waiting for Disk IO
     `THD_WAIT_ROW_LOCK'     Waiting for row lock
     `THD_WAIT_GLOBAL_LOCK'  Waiting for global lock
     `THD_WAIT_META_DATA_LOCK'Waiting for metadata lock
     `THD_WAIT_TABLE_LOCK'   Waiting for table lock
     `THD_WAIT_USER_LOCK'    Waiting for user lock
     `THD_WAIT_BINLOG'       Waiting for binlog
     `THD_WAIT_GROUP_COMMIT' Waiting for group commit
     `THD_WAIT_SYNC'         Waiting for fsync


File: manual.info,  Node: tp-thread-group-state-table,  Next: tp-thread-group-stats-table,  Prev: tp-thread-state-table,  Up: thread-pool-i_s-tables

20.30.2 The `INFORMATION_SCHEMA TP_THREAD_GROUP_STATE' Table
------------------------------------------------------------

This table has one row per thread group in the thread pool. Each row
provides information about the current state of a group. The table has
these columns:

   * `TP_GROUP_ID'

     The thread group ID. This is a unique key within the table.

   * `CONSUMER THREADS'

     The number of consumer threads. There is at most one thread ready
     to start executing if the active threads become stalled or blocked.

   * `RESERVE_THREADS'

     The number of threads in the reserved state. This means that they
     will not be started until there is a need to wake a new thread and
     there is no consumer thread. This is where most threads end up
     when the thread group has created more threads than needed for
     normal operation. Often a thread group needs additional threads
     for a short while and then does not need them again for a while.
     In this case, they go into the reserved state and remain until
     needed again. They take up some extra memory resources, but no
     extra computing resources.

   * `CONNECTION_COUNT'

     The number of connections using this thread group.

   * `QUEUED_QUERIES'

     The number of statements waiting in the high-priority queue.

   * `QUEUED_TRANSACTIONS'

     The number of statements waiting in the low-priority queue.  These
     are the initial statements for transactions that have not started,
     so they also represent queued transactions.

   * `STALL_LIMIT'

     The value of the `thread_pool_stall_limit' variable on the thread
     group. This is the same value for all thread groups.

   * `PRIO_KICKUP_TIMER'

     The value of the `thread_pool_prio_kickup_timer' on the thread
     group. This is the same value for all thread groups.

   * `ALGORITHM'

     The value of the `thread_pool_algorithm' on the thread group. This
     is the same value for all thread groups.

   * `THREAD_COUNT'

     The number of threads started in the thread pool as part of this
     thread group.

   * `ACTIVE_THREAD_COUNT'

     The number of threads active executing statements.

   * `MAX_THREAD_IDS_IN_GROUP'

     The maximum thread ID of the threads in the group. This is the
     same as `MAX(TP_THREAD_NUMBER)' for the threads when selected from
     the *Note `TP_THREAD_GROUP_STATE': tp-thread-group-state-table.
     table. That is, these two queries are equivalent:

          SELECT TP_GROUP_ID, MAX_THREAD_IDS_IN_GROUP
          FROM TP_THREAD_GROUP_STATE;

          SELECT TP_GROUP_ID, MAX(TP_THREAD_NUMBER)
          FROM TP_THREAD_STATE GROUP BY TP_GROUP_ID;

   * `STALLED_THREAD_COUNT'

     The number of stalled statements in the thread group. A stalled
     statement could be executing, but from a thread pool perspective
     it is stalled and making no progress. A long-running statement
     quickly ends up in this category.

   * `WAITING_THREAD_NUMBER'

     If there is a thread handling the polling of statements in the
     thread group, this specifies the thread number within this thread
     group. It is possible that this thread could be executing a
     statement.

   * `OLDEST_QUEUED'

     How long in milliseconds the oldest queued statement has been
     waiting for execution.


File: manual.info,  Node: tp-thread-group-stats-table,  Prev: tp-thread-group-state-table,  Up: thread-pool-i_s-tables

20.30.3 The `INFORMATION_SCHEMA TP_THREAD_GROUP_STATS' Table
------------------------------------------------------------

This table reports statistics per thread group. There is one row per
group. The table has these columns:

   * `TP_GROUP_ID'

     The thread group ID. This is a unique key within the table.

   * `CONNECTIONS_STARTED'

     The number of connections started.

   * `CONNECTIONS_CLOSED'

     The number of connections closed.

   * `QUERIES_EXECUTED'

     The number of statements executed. This number is incremented when
     a statement starts executing, not when it finishes.

   * `QUERIES_QUEUED'

     The number of statements received that were queued for execution.
     This does not count statements that the thread group was able to
     begin executing immediately without queuing, which can happen
     under the conditions described in *Note thread-pool-operation::.

   * `THREADS_STARTED'

     The number of threads started.

   * `PRIO_KICKUPS'

     The number of statements that have been moved from low-priority
     queue to high-priority queue based on the value of the
     `thread_pool_prio_kickup_timer' system variable. If this number
     increases quickly, consider increasing the value of that variable.
     A quickly increasing counter means that the priority system is not
     keeping transactions from starting too early. For *Note `InnoDB':
     innodb-storage-engine, this most likely means deteriorating
     performance due to too many concurrent transactions..

   * `STALLED_QUERIES_EXECUTED'

     The number of statements that have become defined as stalled due
     to executing for a time longer than the value of the
     `thread_pool_stall_limit' system variable.

   * `BECOME_CONSUMER_THREAD'

     The number of times thread have been assigned the consumer thread
     role.

   * `BECOME_RESERVE_THREAD'

     The number of times threads have been assigned the reserve thread
     role.

   * `BECOME_WAITING_THREAD'

     The number of times threads have been assigned the waiter thread
     role. When statements are queued, this happens very often, even in
     normal operation, so rapid increases in this value are normal in
     the case of a highly loaded system where statements are queued up.

   * `WAKE_THREAD_STALL_CHECKER'

     The number of times the stall check thread decided to wake or
     create a thread to possibly handle some statements or take care of
     the waiter thread role.

   * `SLEEP_WAITS'

     The number of `THD_WAIT_SLEEP' waits. These occur when threads go
     to sleep; for example, by calling the `SLEEP()' function.

   * `DISK_IO_WAITS'

     The number of `THD_WAIT_DISKIO' waits. These occur when threads
     perform disk I/O that is likely to not hit the file system cache.
     Such waits occur when the buffer pool reads and writes data to
     disk, not for normal reads from and writes to files.

   * `ROW_LOCK_WAITS'

     The number of `THD_WAIT_ROW_LOCK' waits for release of a row lock
     by another transaction.

   * `GLOBAL_LOCK_WAITS'

     The number of `THD_WAIT_GLOBAL_LOCK' waits for a global lock to be
     released.

   * `META_DATA_LOCK_WAITS'

     The number of `THD_WAIT_META_DATA_LOCK' waits for a metadata lock
     to be released.

   * `TABLE_LOCK_WAITS'

     The number of `THD_WAIT_TABLE_LOCK' waits for a table to be
     unlocked that the statement needs to access.

   * `USER_LOCK_WAITS'

     The number of `THD_WAIT_USER_LOCK' waits for a special lock
     constructed by the user thread.

   * `BINLOG_WAITS'

     The number of `THD_WAIT_BINLOG_WAITS' waits for the binary log to
     become free.

   * `GROUP_COMMIT_WAITS'

     The number of `THD_WAIT_GROUP_COMMIT' waits.  These occur when a
     group commit must wait for the other parties to complete their
     part of a transaction.

   * `FSYNC_WAITS'

     The number of `THD_WAIT_SYNC' waits for a file sync operation.


File: manual.info,  Node: extended-show,  Prev: thread-pool-i_s-tables,  Up: information-schema

20.31 Extensions to `SHOW' Statements
=====================================

Some extensions to *Note `SHOW': show. statements accompany the
implementation of `INFORMATION_SCHEMA':

   * *Note `SHOW': show. can be used to get information about the
     structure of `INFORMATION_SCHEMA' itself.

   * Several *Note `SHOW': show. statements accept a `WHERE' clause
     that provides more flexibility in specifying which rows to display.

`INFORMATION_SCHEMA' is an information database, so its name is
included in the output from *Note `SHOW DATABASES': show-databases.
Similarly, *Note `SHOW TABLES': show-tables. can be used with
`INFORMATION_SCHEMA' to obtain a list of its tables:

     mysql> SHOW TABLES FROM INFORMATION_SCHEMA;
     +---------------------------------------+
     | Tables_in_INFORMATION_SCHEMA          |
     +---------------------------------------+
     | CHARACTER_SETS                        |
     | COLLATIONS                            |
     | COLLATION_CHARACTER_SET_APPLICABILITY |
     | COLUMNS                               |
     | COLUMN_PRIVILEGES                     |
     | ENGINES                               |
     | EVENTS                                |
     | FILES                                 |
     | GLOBAL_STATUS                         |
     | GLOBAL_VARIABLES                      |
     | KEY_COLUMN_USAGE                      |
     | PARTITIONS                            |
     | PLUGINS                               |
     | PROCESSLIST                           |
     | REFERENTIAL_CONSTRAINTS               |
     | ROUTINES                              |
     | SCHEMATA                              |
     | SCHEMA_PRIVILEGES                     |
     | SESSION_STATUS                        |
     | SESSION_VARIABLES                     |
     | STATISTICS                            |
     | TABLES                                |
     | TABLE_CONSTRAINTS                     |
     | TABLE_PRIVILEGES                      |
     | TRIGGERS                              |
     | USER_PRIVILEGES                       |
     | VIEWS                                 |
     +---------------------------------------+
     27 rows in set (0.00 sec)

*Note `SHOW COLUMNS': show-columns. and *Note `DESCRIBE': describe. can
display information about the columns in individual
`INFORMATION_SCHEMA' tables.

*Note `SHOW': show. statements that accept a `LIKE' clause to limit the
rows displayed also permit a `WHERE' clause that specifies more general
conditions that selected rows must satisfy:

     SHOW CHARACTER SET
     SHOW COLLATION
     SHOW COLUMNS
     SHOW DATABASES
     SHOW FUNCTION STATUS
     SHOW INDEX
     SHOW OPEN TABLES
     SHOW PROCEDURE STATUS
     SHOW STATUS
     SHOW TABLE STATUS
     SHOW TABLES
     SHOW TRIGGERS
     SHOW VARIABLES

The `WHERE' clause, if present, is evaluated against the column names
displayed by the *Note `SHOW': show. statement. For example, the *Note
`SHOW CHARACTER SET': show-character-set. statement produces these
output columns:

     mysql> SHOW CHARACTER SET;
     +----------+-----------------------------+---------------------+--------+
     | Charset  | Description                 | Default collation   | Maxlen |
     +----------+-----------------------------+---------------------+--------+
     | big5     | Big5 Traditional Chinese    | big5_chinese_ci     |      2 |
     | dec8     | DEC West European           | dec8_swedish_ci     |      1 |
     | cp850    | DOS West European           | cp850_general_ci    |      1 |
     | hp8      | HP West European            | hp8_english_ci      |      1 |
     | koi8r    | KOI8-R Relcom Russian       | koi8r_general_ci    |      1 |
     | latin1   | cp1252 West European        | latin1_swedish_ci   |      1 |
     | latin2   | ISO 8859-2 Central European | latin2_general_ci   |      1 |
     ...

To use a `WHERE' clause with *Note `SHOW CHARACTER SET':
show-character-set, you would refer to those column names. As an
example, the following statement displays information about character
sets for which the default collation contains the string `'japanese'':

     mysql> SHOW CHARACTER SET WHERE `Default collation` LIKE '%japanese%';
     +---------+---------------------------+---------------------+--------+
     | Charset | Description               | Default collation   | Maxlen |
     +---------+---------------------------+---------------------+--------+
     | ujis    | EUC-JP Japanese           | ujis_japanese_ci    |      3 |
     | sjis    | Shift-JIS Japanese        | sjis_japanese_ci    |      2 |
     | cp932   | SJIS for Windows Japanese | cp932_japanese_ci   |      2 |
     | eucjpms | UJIS for Windows Japanese | eucjpms_japanese_ci |      3 |
     +---------+---------------------------+---------------------+--------+

This statement displays the multi-byte character sets:

     mysql> SHOW CHARACTER SET WHERE Maxlen > 1;
     +---------+---------------------------+---------------------+--------+
     | Charset | Description               | Default collation   | Maxlen |
     +---------+---------------------------+---------------------+--------+
     | big5    | Big5 Traditional Chinese  | big5_chinese_ci     |      2 |
     | ujis    | EUC-JP Japanese           | ujis_japanese_ci    |      3 |
     | sjis    | Shift-JIS Japanese        | sjis_japanese_ci    |      2 |
     | euckr   | EUC-KR Korean             | euckr_korean_ci     |      2 |
     | gb2312  | GB2312 Simplified Chinese | gb2312_chinese_ci   |      2 |
     | gbk     | GBK Simplified Chinese    | gbk_chinese_ci      |      2 |
     | utf8    | UTF-8 Unicode             | utf8_general_ci     |      3 |
     | ucs2    | UCS-2 Unicode             | ucs2_general_ci     |      2 |
     | cp932   | SJIS for Windows Japanese | cp932_japanese_ci   |      2 |
     | eucjpms | UJIS for Windows Japanese | eucjpms_japanese_ci |      3 |
     +---------+---------------------------+---------------------+--------+


File: manual.info,  Node: performance-schema,  Next: connectors-apis,  Prev: information-schema,  Up: Top

21 MySQL Performance Schema
***************************

* Menu:

* performance-schema-quick-start::  Performance Schema Quick Start
* performance-schema-configuration::  Performance Schema Configuration
* performance-schema-queries::   Performance Schema Queries
* performance-schema-instrument-naming::  Performance Schema Instrument Naming Conventions
* performance-schema-status-monitoring::  Performance Schema Status Monitoring
* performance-schema-table-characteristics::  Performance Schema General Table Characteristics
* performance-schema-table-descriptions::  Performance Schema Table Descriptions
* performance-schema-option-variable-reference::  Performance Schema Option and Variable Reference
* performance-schema-system-variables::  Performance Schema System Variables
* performance-schema-status-variables::  Performance Schema Status Variables
* performance-schema-and-plugins::  Performance Schema and Plugins
* performance-schema-examples::  Using the Performance Schema to Diagnose Problems

The MySQL Performance Schema is a feature for monitoring MySQL Server
execution at a low level. The Performance Schema is available as of
MySQL 5.5.3 and has these characteristics:

   * The Performance Schema provides a way to inspect internal
     execution of the server at runtime. It is implemented using the
     *Note `PERFORMANCE_SCHEMA': performance-schema. storage engine and
     the `performance_schema' database. The Performance Schema focuses
     primarily on performance data. This differs from
     `INFORMATION_SCHEMA', which serves for inspection of metadata.

   * The Performance Schema monitors server events. An `event' is
     anything the server does that takes time and has been instrumented
     so that timing information can be collected. In general, an event
     could be a function call, a wait for the operating system, a stage
     of an SQL statement execution such as parsing or sorting, or an
     entire statement or group of statements. Currently, event
     collection provides access to information about synchronization
     calls (such as for mutexes) and file I/O calls for the server and
     for several storage engines.

   * Performance Schema events are distinct from events written to the
     server's binary log (which describe data modifications) and Event
     Scheduler events (which are a type of stored program).

   * Current events are available, as well as event histories and
     summaries. This enables you to determine how many times
     instrumented activities were performed and how much time they
     took. Event information is available to show the activities of
     specific threads, or activity associated with particular objects
     such as a mutex or file.

   * The *Note `PERFORMANCE_SCHEMA': performance-schema. storage engine
     collects event data using `instrumentation points' in server
     source code.

   * Collected events are stored in tables in the `performance_schema'
     database. These tables can be queried using *Note `SELECT': select.
     statements like other tables.

   * Performance Schema configuration can be modified dynamically by
     updating tables in the `performance_schema' database through SQL
     statements. Configuration changes affect data collection
     immediately.

   * Tables in the `performance_schema' database are views or temporary
     tables that use no persistent on-disk storage.

   * Monitoring is available on all platforms supported by MySQL.

     Some limitations might apply: The types of timers might vary per
     platform. Instruments that apply to storage engines might not be
     implemented for all storage engines. Instrumentation of each
     third-party engine is the responsibility of the engine maintainer.
     See also *Note performance-schema-restrictions::.

   * Data collection is implemented by modifying the server source code
     to add instrumentation. There are no separate threads associated
     with the Performance Schema, unlike other features such as
     replication or the Event Scheduler.

The Performance Schema is intended to provide access to useful
information about server execution while having minimal impact on
server performance. The implementation follows these design goals:

   * Activating the Performance Schema causes no changes in server
     behavior. For example, it does not cause thread scheduling to
     change, and it does not cause query execution plans (as shown by
     *Note `EXPLAIN': explain.) to change.

   * No memory allocation is done beyond that which occurs during
     server startup. By using early allocation of structures with a
     fixed size, it is never necessary to resize or reallocate them,
     which is critical for achieving good runtime performance.

   * Server monitoring occurs continuously and unobtrusively with very
     little overhead. Activating the Performance Schema does not make
     the server unusable.

   * The parser is unchanged. There are no new keywords or statements.

   * Execution of server code proceeds normally even if the Performance
     Schema fails internally.

   * When there is a choice between performing processing during event
     collection initially or during event retrieval later, priority is
     given to making collection faster. This is because collection is
     ongoing whereas retrieval is on demand and might never happen at
     all.

   * It is easy to add new instrumentation points.

   * Instrumentation is versioned. If the instrumentation
     implementation changes, previously instrumented code will continue
     to work. This benefits developers of third-party plugins because
     it is not necessary to upgrade each plugin to stay synchronized
     with the latest Performance Schema changes.


File: manual.info,  Node: performance-schema-quick-start,  Next: performance-schema-configuration,  Prev: performance-schema,  Up: performance-schema

21.1 Performance Schema Quick Start
===================================

This section briefly introduces the Performance Schema with examples
that show how to use it. For additional examples, see *Note
performance-schema-examples::.

For the Performance Schema to be available, support for it must have
been configured when MySQL was built. You can verify whether this is
the case by checking the server's help output. If the Performance
Schema is available, the output will mention several variables with
names that begin with `performance_schema':

     shell> mysqld --verbose --help
     ...
       --performance_schema
                           Enable the performance schema.
       --performance_schema_events_waits_history_long_size=#
                           Number of rows in events_waits_history_long.
     ...

If such variables do not appear in the output, your server has not been
built to support the Performance Schema. In this case, see *Note
performance-schema-configuration::.

Assuming that the Performance Schema is available, it is disabled by
default. To enable it, start the server with the `performance_schema'
variable enabled. For example, use these lines in your `my.cnf' file:

     [mysqld]
     performance_schema

When the server starts, it sees `performance_schema' and attempts to
initialize the Performance Schema. To verify successful initialization,
use this statement:

     mysql> SHOW VARIABLES LIKE 'performance_schema';
     +--------------------+-------+
     | Variable_name      | Value |
     +--------------------+-------+
     | performance_schema | ON    |
     +--------------------+-------+

A value of `ON' means that the Performance Schema initialized
successfully and is ready for use. A value of `OFF' means that some
error occurred. Check the server error log for information about what
went wrong.

The Performance Schema is implemented as a storage engine. If this
engine is available (which you should already have checked earlier),
you should see it listed with a `SUPPORT' value of `YES' in the output
from the *Note `INFORMATION_SCHEMA.ENGINES': engines-table. table or
the *Note `SHOW ENGINES': show-engines. statement:

     mysql> SELECT * FROM INFORMATION_SCHEMA.ENGINES
         -> WHERE ENGINE='PERFORMANCE_SCHEMA'\G
     *************************** 1. row ***************************
           ENGINE: PERFORMANCE_SCHEMA
          SUPPORT: YES
          COMMENT: Performance Schema
     TRANSACTIONS: NO
               XA: NO
       SAVEPOINTS: NO

     mysql> SHOW ENGINES\G
     ...
           Engine: PERFORMANCE_SCHEMA
          Support: YES
          Comment: Performance Schema
     Transactions: NO
               XA: NO
       Savepoints: NO
     ...

The *Note `PERFORMANCE_SCHEMA': performance-schema. storage engine
operates on tables in the `performance_schema' database. You can make
`performance_schema' the default database so that references to its
tables need not be qualified with the database name:

     mysql> USE performance_schema;

Many examples in this chapter assume that `performance_schema' is the
default database.

Performance Schema tables are stored in the `performance_schema'
database. Information about the structure of this database and its
tables can be obtained, as for any other database, by selecting from the
`INFORMATION_SCHEMA' database or by using *Note `SHOW': show.
statements. For example, use either of these statements to see what
Performance Schema tables exist:

     mysql> SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES
         -> WHERE TABLE_SCHEMA = 'performance_schema';
     +----------------------------------------------+
     | TABLE_NAME                                   |
     +----------------------------------------------+
     | cond_instances                               |
     | events_waits_current                         |
     | events_waits_history                         |
     | events_waits_history_long                    |
     | events_waits_summary_by_instance             |
     | events_waits_summary_by_thread_by_event_name |
     | events_waits_summary_global_by_event_name    |
     | file_instances                               |
     | file_summary_by_event_name                   |
     | file_summary_by_instance                     |
     | mutex_instances                              |
     | performance_timers                           |
     | rwlock_instances                             |
     | setup_consumers                              |
     | setup_instruments                            |
     | setup_timers                                 |
     | threads                                      |
     +----------------------------------------------+

     mysql> SHOW TABLES FROM performance_schema;
     +----------------------------------------------+
     | Tables_in_performance_schema                 |
     +----------------------------------------------+
     | cond_instances                               |
     | events_waits_current                         |
     | events_waits_history                         |
     ...

The number of Performance Schema tables is expected to increase over
time as implementation of additional instrumentation proceeds.

The name of the `performance_schema' database is lowercase, as are the
names of tables within it. Queries should specify the names in
lowercase.

*Note*:

Before MySQL 5.5.8, the table names were uppercase, which caused
problems on some systems for certain values of the
`lower_case_table_names' system variable.

To see the structure of individual tables, use `SHOW CREATE TABLE':

     mysql> SHOW CREATE TABLE setup_timers\G
     *************************** 1. row ***************************
            Table: setup_timers
     Create Table: CREATE TABLE `setup_timers` (
       `NAME` varchar(64) NOT NULL,
       `TIMER_NAME` enum('CYCLE','NANOSECOND','MICROSECOND','MILLISECOND','TICK')
        NOT NULL
     ) ENGINE=PERFORMANCE_SCHEMA DEFAULT CHARSET=utf8

Table structure is also available by selecting from tables such as
*Note `INFORMATION_SCHEMA.COLUMNS': columns-table. or by using
statements such as `SHOW COLUMNS'.

Tables in the `performance_schema' database can be grouped according to
the type of information in them: Current events, event histories and
summaries, object instances, and setup (configuration) information. The
following examples illustrate a few uses for these tables. For detailed
information about the tables in each group, see *Note
performance-schema-table-descriptions::.

To see what the server is doing at the moment, examine the *Note
`events_waits_current': events-waits-current-table. table. It contains
one row per thread showing each thread's most recent monitored event:

     mysql> SELECT * FROM events_waits_current\G
     *************************** 1. row ***************************
                 THREAD_ID: 0
                  EVENT_ID: 5523
                EVENT_NAME: wait/synch/mutex/mysys/THR_LOCK::mutex
                    SOURCE: thr_lock.c:525
               TIMER_START: 201660494489586
                 TIMER_END: 201660494576112
                TIMER_WAIT: 86526
                     SPINS: NULL
             OBJECT_SCHEMA: NULL
               OBJECT_NAME: NULL
               OBJECT_TYPE: NULL
     OBJECT_INSTANCE_BEGIN: 142270668
          NESTING_EVENT_ID: NULL
                 OPERATION: lock
           NUMBER_OF_BYTES: NULL
                     FLAGS: 0
     ...

This event indicates that thread 0 was waiting for 86,526 picoseconds
to acquire a lock on `THR_LOCK::mutex', a mutex in the `mysys'
subsystem. The first few columns provide the following information:

   * The ID columns indicate which thread the event comes from and the
     event number.

   * `EVENT_NAME' indicates what was instrumented and `SOURCE'
     indicates which source file contains the instrumented code.

   * The timer columns show when the event started and stopped and how
     long it took. If an event is still in progress, the `TIMER_END'
     and `TIMER_WAIT' values are `NULL'. Timer values are approximate
     and expressed in picoseconds. For information about timers and
     event time collection, see *Note performance-schema-timing::.

The history tables contain the same kind of rows as the current-events
table but have more rows and show what the server has been doing
`recently' rather than `currently.' The *Note `events_waits_history':
events-waits-history-table. and *Note `events_waits_history_long':
events-waits-history-long-table. tables contain the most recent 10
events per thread and most recent 10,000 events, respectively. For
example, to see information for recent events produced by thread 13, do
this:

     mysql> SELECT EVENT_ID, EVENT_NAME, TIMER_WAIT
         -> FROM events_waits_history WHERE THREAD_ID = 13
         -> ORDER BY EVENT_ID;
     +----------+-----------------------------------------+------------+
     | EVENT_ID | EVENT_NAME                              | TIMER_WAIT |
     +----------+-----------------------------------------+------------+
     |       86 | wait/synch/mutex/mysys/THR_LOCK::mutex  |     686322 |
     |       87 | wait/synch/mutex/mysys/THR_LOCK_malloc  |     320535 |
     |       88 | wait/synch/mutex/mysys/THR_LOCK_malloc  |     339390 |
     |       89 | wait/synch/mutex/mysys/THR_LOCK_malloc  |     377100 |
     |       90 | wait/synch/mutex/sql/LOCK_plugin        |     614673 |
     |       91 | wait/synch/mutex/sql/LOCK_open          |     659925 |
     |       92 | wait/synch/mutex/sql/THD::LOCK_thd_data |     494001 |
     |       93 | wait/synch/mutex/mysys/THR_LOCK_malloc  |     222489 |
     |       94 | wait/synch/mutex/mysys/THR_LOCK_malloc  |     214947 |
     |       95 | wait/synch/mutex/mysys/LOCK_alarm       |     312993 |
     +----------+-----------------------------------------+------------+

As new events are added to a history table, older events are discarded
if the table is full.

Summary tables provide aggregated information for all events over time.
The tables in this group summarize event data in different ways. To see
which instruments have been executed the most times or have taken the
most wait time, sort the *Note
`events_waits_summary_global_by_event_name': event-wait-summary-tables.
table on the `COUNT_STAR' or `SUM_TIMER_WAIT' column, which correspond
to a `COUNT(*)' or `SUM(TIMER_WAIT)' value, respectively, calculated
over all events:

     mysql> SELECT EVENT_NAME, COUNT_STAR
         -> FROM events_waits_summary_global_by_event_name
         -> ORDER BY COUNT_STAR DESC LIMIT 10;
     +---------------------------------------------------+------------+
     | EVENT_NAME                                        | COUNT_STAR |
     +---------------------------------------------------+------------+
     | wait/synch/mutex/mysys/THR_LOCK_malloc            |       6419 |
     | wait/io/file/sql/FRM                              |        452 |
     | wait/synch/mutex/sql/LOCK_plugin                  |        337 |
     | wait/synch/mutex/mysys/THR_LOCK_open              |        187 |
     | wait/synch/mutex/mysys/LOCK_alarm                 |        147 |
     | wait/synch/mutex/sql/THD::LOCK_thd_data           |        115 |
     | wait/io/file/myisam/kfile                         |        102 |
     | wait/synch/mutex/sql/LOCK_global_system_variables |         89 |
     | wait/synch/mutex/mysys/THR_LOCK::mutex            |         89 |
     | wait/synch/mutex/sql/LOCK_open                    |         88 |
     +---------------------------------------------------+------------+

     mysql> SELECT EVENT_NAME, SUM_TIMER_WAIT
         -> FROM events_waits_summary_global_by_event_name
         -> ORDER BY SUM_TIMER_WAIT DESC LIMIT 10;
     +----------------------------------------+----------------+
     | EVENT_NAME                             | SUM_TIMER_WAIT |
     +----------------------------------------+----------------+
     | wait/io/file/sql/MYSQL_LOG             |     1599816582 |
     | wait/synch/mutex/mysys/THR_LOCK_malloc |     1530083250 |
     | wait/io/file/sql/binlog_index          |     1385291934 |
     | wait/io/file/sql/FRM                   |     1292823243 |
     | wait/io/file/myisam/kfile              |      411193611 |
     | wait/io/file/myisam/dfile              |      322401645 |
     | wait/synch/mutex/mysys/LOCK_alarm      |      145126935 |
     | wait/io/file/sql/casetest              |      104324715 |
     | wait/synch/mutex/sql/LOCK_plugin       |       86027823 |
     | wait/io/file/sql/pid                   |       72591750 |
     +----------------------------------------+----------------+

These results show that the `THR_LOCK_malloc' mutex is `hot,' both in
terms of how often it is used and amount of time that threads wait
attempting to acquire it.

*Note*:

The `THR_LOCK_malloc' mutex is used only in debug builds. In production
builds it is not hot because it is nonexistent.

Instance tables document what types of objects are instrumented.  An
instrumented object, when used by the server, produces an event. These
tables provide event names and explanatory notes or status information.
For example, the *Note `file_instances': file-instances-table. table
lists instances of instruments for file I/O operations and their
associated files:

     mysql> SELECT * FROM file_instances\G
     *************************** 1. row ***************************
      FILE_NAME: /opt/mysql-log/60500/binlog.000007
     EVENT_NAME: wait/io/file/sql/binlog
     OPEN_COUNT: 0
     *************************** 2. row ***************************
      FILE_NAME: /opt/mysql/60500/data/mysql/tables_priv.MYI
     EVENT_NAME: wait/io/file/myisam/kfile
     OPEN_COUNT: 1
     *************************** 3. row ***************************
      FILE_NAME: /opt/mysql/60500/data/mysql/columns_priv.MYI
     EVENT_NAME: wait/io/file/myisam/kfile
     OPEN_COUNT: 1
     ...

Setup tables are used to configure and display monitoring
characteristics. For example, to see which event timer is selected,
query the *Note `setup_timers': setup-timers-table.  tables:

     mysql> SELECT * FROM setup_timers;
     +------+------------+
     | NAME | TIMER_NAME |
     +------+------------+
     | wait | CYCLE      |
     +------+------------+

*Note `setup_instruments': setup-instruments-table. lists the set of
instruments for which events can be collected and shows which of them
are enabled:

     mysql> SELECT * FROM setup_instruments;
     +------------------------------------------------------------+---------+-------+
     | NAME                                                       | ENABLED | TIMED |
     +------------------------------------------------------------+---------+-------+
     ...
     | wait/synch/mutex/sql/LOCK_global_read_lock                 | YES     | YES   |
     | wait/synch/mutex/sql/LOCK_global_system_variables          | YES     | YES   |
     | wait/synch/mutex/sql/LOCK_lock_db                          | YES     | YES   |
     | wait/synch/mutex/sql/LOCK_manager                          | YES     | YES   |
     ...
     | wait/synch/rwlock/sql/LOCK_grant                           | YES     | YES   |
     | wait/synch/rwlock/sql/LOGGER::LOCK_logger                  | YES     | YES   |
     | wait/synch/rwlock/sql/LOCK_sys_init_connect                | YES     | YES   |
     | wait/synch/rwlock/sql/LOCK_sys_init_slave                  | YES     | YES   |
     ...
     | wait/io/file/sql/binlog                                    | YES     | YES   |
     | wait/io/file/sql/binlog_index                              | YES     | YES   |
     | wait/io/file/sql/casetest                                  | YES     | YES   |
     | wait/io/file/sql/dbopt                                     | YES     | YES   |
     ...

To understand how to interpret instrument names, see *Note
performance-schema-instrument-naming::.

To control whether events are collected for an instrument, set its
`ENABLED' value to `YES' or `NO'. For example:

     mysql> UPDATE setup_instruments SET ENABLED = 'NO'
         -> WHERE NAME = 'wait/synch/mutex/sql/LOCK_mysql_create_db';

The Performance Schema uses collected events to update tables in the
`performance_schema' database, which act as `consumers' of event
information. The *Note `setup_consumers': setup-consumers-table. table
lists the available consumers and shows which of them are enabled:

     mysql> SELECT * FROM setup_consumers;
     +----------------------------------------------+---------+
     | NAME                                         | ENABLED |
     +----------------------------------------------+---------+
     | events_waits_current                         | YES     |
     | events_waits_history                         | YES     |
     | events_waits_history_long                    | YES     |
     | events_waits_summary_by_thread_by_event_name | YES     |
     | events_waits_summary_by_event_name           | YES     |
     | events_waits_summary_by_instance             | YES     |
     | file_summary_by_event_name                   | YES     |
     | file_summary_by_instance                     | YES     |
     +----------------------------------------------+---------+

To control whether the Performance Schema maintains a consumer as a
destination for event information, set its `ENABLED' value.

For more information about the setup tables and how to use them to
control event collection, see *Note performance-schema-filtering::.

There are some miscellaneous tables that do not fall into any of the
previous groups. For example, *Note `performance_timers':
performance-timers-table. lists the available event timers and their
characteristics. For information about timers, see *Note
performance-schema-timing::.


File: manual.info,  Node: performance-schema-configuration,  Next: performance-schema-queries,  Prev: performance-schema-quick-start,  Up: performance-schema

21.2 Performance Schema Configuration
=====================================

* Menu:

* performance-schema-build-configuration::  Performance Schema Build Configuration
* performance-schema-startup-configuration::  Performance Schema Startup Configuration
* performance-schema-runtime-configuration::  Performance Schema Runtime Configuration

To use the MySQL Performance Schema, these configuration considerations
apply:

   * The Performance Schema must be configured into MySQL Server at
     build time to make it available. Performance Schema support is
     included in binary MySQL distributions. If you are building from
     source, you must ensure that it is configured into the build as
     described in *Note performance-schema-build-configuration::.

   * The Performance Schema must be enabled at server startup to enable
     event collection to occur. Specific Performance Schema features
     can be enabled at server startup or at runtime to control which
     types of event collection occur. See *Note
     performance-schema-startup-configuration::, *Note
     performance-schema-runtime-configuration::, and *Note
     performance-schema-filtering::.


File: manual.info,  Node: performance-schema-build-configuration,  Next: performance-schema-startup-configuration,  Prev: performance-schema-configuration,  Up: performance-schema-configuration

21.2.1 Performance Schema Build Configuration
---------------------------------------------

For the Performance Schema to be available, it must be configured into
the MySQL server at build time. Binary MySQL distributions provided by
Oracle Corporation are configured to support the Performance Schema. If
you use a binary MySQL distribution from another provider, check with
the provider whether the distribution has been appropriately configured.

If you build MySQL from a source distribution, enable the Performance
Schema by running `CMake' with the `WITH_PERFSCHEMA_STORAGE_ENGINE'
option enabled:

     shell> cmake . -DWITH_PERFSCHEMA_STORAGE_ENGINE=1

Configuring MySQL with the `-DWITHOUT_PERFSCHEMA_STORAGE_ENGINE=1'
option prevents inclusion of the Performance Schema, so if you want it
included, do not use this option. See *Note
source-configuration-options::.

If you install MySQL over a previous installation that was configured
without the Performance Schema (or with an older version of the
Performance Schema that may not have all the current tables), run *Note
`mysql_upgrade': mysql-upgrade. after starting the server to ensure
that the `performance_schema' database exists with all current tables.
Then restart the server. One indication that you need to do this is the
presence of messages such as the following in the error log:

     [ERROR] Native table 'performance_schema'.'events_waits_history'
     has the wrong structure
     [ERROR] Native table 'performance_schema'.'events_waits_history_long'
     has the wrong structure
     ...

To verify whether a server was built with Performance Schema support,
check its help output. If the Performance Schema is available, the
output will mention several variables with names that begin with
`performance_schema':

     shell> mysqld --verbose --help
     ...
       --performance_schema
                           Enable the performance schema.
       --performance_schema_events_waits_history_long_size=#
                           Number of rows in events_waits_history_long.
     ...

You can also connect to the server and look for a line that names the
*Note `PERFORMANCE_SCHEMA': performance-schema.  storage engine in the
output from *Note `SHOW ENGINES': show-engines.:

     mysql> SHOW ENGINES\G
     ...
           Engine: PERFORMANCE_SCHEMA
          Support: YES
          Comment: Performance Schema
     Transactions: NO
               XA: NO
       Savepoints: NO
     ...

If the Performance Schema was not configured into the server at build
time, no row for *Note `PERFORMANCE_SCHEMA': performance-schema. will
appear in the output from *Note `SHOW ENGINES': show-engines. You might
see `performance_schema' listed in the output from *Note `SHOW
DATABASES': show-databases, but it will have no tables and you will not
be able to use it.

A line for *Note `PERFORMANCE_SCHEMA': performance-schema. in the *Note
`SHOW ENGINES': show-engines. output means that the Performance Schema
is available, not that it is enabled. To enable it, you must do so at
server startup, as described in the next section.


File: manual.info,  Node: performance-schema-startup-configuration,  Next: performance-schema-runtime-configuration,  Prev: performance-schema-build-configuration,  Up: performance-schema-configuration

21.2.2 Performance Schema Startup Configuration
-----------------------------------------------

The Performance Schema is disabled by default. To enable it, start the
server with the `performance_schema' variable enabled. For example, use
these lines in your `my.cnf' file:

     [mysqld]
     performance_schema

If the server is unable to allocate any internal buffer during
Performance Schema initialization, the Performance Schema disables
itself and sets `performance_schema' to `OFF', and the server runs
without instrumentation.

The Performance Schema includes several system variables that provide
configuration information:

     mysql> SHOW VARIABLES LIKE 'perf%';
     +---------------------------------------------------+---------+
     | Variable_name                                     | Value   |
     +---------------------------------------------------+---------+
     | performance_schema                                | ON      |
     | performance_schema_events_waits_history_long_size | 10000   |
     | performance_schema_events_waits_history_size      | 10      |
     | performance_schema_max_cond_classes               | 80      |
     | performance_schema_max_cond_instances             | 1000    |
     | performance_schema_max_file_classes               | 50      |
     | performance_schema_max_file_handles               | 32768   |
     | performance_schema_max_file_instances             | 10000   |
     | performance_schema_max_mutex_classes              | 200     |
     | performance_schema_max_mutex_instances            | 1000000 |
     | performance_schema_max_rwlock_classes             | 30      |
     | performance_schema_max_rwlock_instances           | 1000000 |
     | performance_schema_max_table_handles              | 100000  |
     | performance_schema_max_table_instances            | 50000   |
     | performance_schema_max_thread_classes             | 50      |
     | performance_schema_max_thread_instances           | 1000    |
     +---------------------------------------------------+---------+

The `performance_schema' variable is `ON' or `OFF' to indicate whether
the Performance Schema is enabled or disabled. The other variables
indicate table sizes (number of rows) or memory allocation values.

*Note*:

With the Performance Schema enabled, the number of Performance Schema
instances affects the server memory footprint, perhaps to a large
extent. It may be necessary to tune the values of Performance Schema
system variables to find the number of instances that balances
insufficient instrumentation against excessive memory consumption.

To change the value of Performance Schema system variables, set them at
server startup. For example, put the following lines in a `my.cnf' file
to change the sizes of the history tables:

     [mysqld]
     performance_schema
     performance_schema_events_waits_history_size=20
     performance_schema_events_waits_history_long_size=15000


File: manual.info,  Node: performance-schema-runtime-configuration,  Prev: performance-schema-startup-configuration,  Up: performance-schema-configuration

21.2.3 Performance Schema Runtime Configuration
-----------------------------------------------

* Menu:

* performance-schema-timing::    Performance Schema Event Timing
* performance-schema-filtering::  Performance Schema Event Filtering
* performance-schema-instrumentation-checking::  Determining What Is Instrumented

Performance Schema setup tables contain information about monitoring
configuration:

     mysql> SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES
         -> WHERE TABLE_SCHEMA = 'performance_schema'
         -> AND TABLE_NAME LIKE 'setup%';
     +-------------------+
     | TABLE_NAME        |
     +-------------------+
     | setup_consumers   |
     | setup_instruments |
     | setup_timers      |
     +-------------------+

You can examine the contents of these tables to obtain information
about Performance Schema monitoring characteristics.  If you have the
`UPDATE' privilege, you can change Performance Schema operation by
modifying setup tables to affect how monitoring occurs. For additional
details about these tables, see *Note performance-schema-setup-tables::.

To see which event timer is selected, query the *Note `setup_timers':
setup-timers-table. tables:

     mysql> SELECT * FROM setup_timers;
     +------+------------+
     | NAME | TIMER_NAME |
     +------+------------+
     | wait | CYCLE      |
     +------+------------+

The `NAME' value indicates the type of instrument to which the timer
applies, and `TIMER_NAME' indicates which timer applies to those
instruments. The timer applies to instruments where their name begins
with a component matching the `NAME' value. Currently, there are only
`wait' instruments, so this table has only one row and the timer
applies to all instruments.

To change the timer, update the `NAME' value.  For example, to use the
`NANOSECOND' timer:

     mysql> UPDATE setup_timers SET TIMER_NAME = 'NANOSECOND'
         -> WHERE NAME = 'wait';

     mysql> SELECT * FROM setup_timers;
     +------+------------+
     | NAME | TIMER_NAME |
     +------+------------+
     | wait | NANOSECOND |
     +------+------------+

For discussion of timers, see *Note performance-schema-timing::.

The *Note `setup_instruments': setup-instruments-table. and *Note
`setup_consumers': setup-consumers-table. tables list the instruments
for which events can be collected and the types of consumers for which
event information actually is collected, respectively. *Note
performance-schema-filtering::, discusses how you can modify these
tables to affect event collection.

If there are Performance Schema configuration changes that must be made
at runtime using SQL statements and you would like to these changes
take effect each time the server starts, put the statements in a file
and start the server with the `--init-file=FILE_NAME' option. This
strategy can also be useful if you have multiple monitoring
configurations, each tailored to produce a different kind of
monitoring, such as casual server health monitoring, incident
investigation, application behavior troubleshooting, and so forth. Put
the statements for each monitoring configuration into their own file
and specify the appropriate file as the `--init-file' argument when you
start the server.


File: manual.info,  Node: performance-schema-timing,  Next: performance-schema-filtering,  Prev: performance-schema-runtime-configuration,  Up: performance-schema-runtime-configuration

21.2.3.1 Performance Schema Event Timing
........................................

Events are collected by means of instrumentation added to the server
source code. Instruments time events, which is how the Performance
Schema provides an idea of how long events take.  It is also possible
to configure instruments not to collect timing information. This
section discusses the available timers and their characteristics, and
how timing values are represented in events.

Two tables provide timer information:

   * *Note `performance_timers': performance-timers-table. lists the
     available timers and their characteristics.

   * *Note `setup_timers': setup-timers-table. indicates which timers
     are used for which instruments.

Each timer row in *Note `setup_timers': setup-timers-table.  must refer
to one of the timers listed in *Note `performance_timers':
performance-timers-table.

Timers vary in precision and the amount of overhead they involve. To
see what timers are available and their characteristics, check the
*Note `performance_timers': performance-timers-table. table:

     mysql> SELECT * FROM performance_timers;
     +-------------+-----------------+------------------+----------------+
     | TIMER_NAME  | TIMER_FREQUENCY | TIMER_RESOLUTION | TIMER_OVERHEAD |
     +-------------+-----------------+------------------+----------------+
     | CYCLE       |      2389029850 |                1 |             72 |
     | NANOSECOND  |            NULL |             NULL |           NULL |
     | MICROSECOND |         1000000 |                1 |            585 |
     | MILLISECOND |            1035 |                1 |            738 |
     | TICK        |             101 |                1 |            630 |
     +-------------+-----------------+------------------+----------------+

The `TIMER_NAME' column shows the names of the available timers.
`CYCLE' refers to the timer that is based on the CPU (processor) cycle
counter. If the values associated with a given timer name are `NULL',
that timer is not supported on your platform. The rows that do not have
`NULL' indicate which timers you can use in *Note `setup_timers':
setup-timers-table.

`TIMER_FREQUENCY' indicates the number of timer units per second. For a
cycle timer, the frequency is generally related to the CPU speed. The
value shown was obtained on a system with a 2.4GHz processor. The other
timers are based on fixed fractions of seconds. For `TICK', the
frequency may vary by platform (for example, some use 100 ticks/second,
others 1000 ticks/second).

`TIMER_RESOLUTION' indicates the number of timer units by which timer
values increase at a time. If a timer has a resolution of 10, its value
increases by 10 each time.

`TIMER_OVERHEAD' is the minimal number of cycles of overhead to obtain
one timing with the given timer.  The overhead per event is twice the
value displayed because the timer is invoked at the beginning and end
of the event.

To see which timer is in effect or to change the timer, access the
*Note `setup_timers': setup-timers-table. table:

     mysql> SELECT * FROM setup_timers;
     +------+------------+
     | NAME | TIMER_NAME |
     +------+------------+
     | wait | CYCLE      |
     +------+------------+

     mysql> UPDATE setup_timers SET TIMER_NAME = 'MICROSECOND'
         -> WHERE NAME = 'wait';

     mysql> SELECT * FROM setup_timers;
     +------+-------------+
     | NAME | TIMER_NAME  |
     +------+-------------+
     | wait | MICROSECOND |
     +------+-------------+

By default, the Performance Schema uses the best timer available for
each instrument type, but you can select a different one. Generally the
best timer is `CYCLE', which uses the CPU cycle counter whenever
possible to provide high precision and low overhead.

The precision offered by the cycle counter depends on processor speed.
If the processor runs at 1 GHz (one billion cycles/second) or higher,
the cycle counter delivers sub-nanosecond precision. Using the cycle
counter is much cheaper than getting the actual time of day. For
example, the standard `gettimeofday()' function can take hundreds of
cycles, which is an unacceptable overhead for data gathering that may
occur thousands or millions of times per second.

Cycle counters also have disadvantages:

   * End users expect to see timings in wall-clock units, such as
     fractions of a second. Converting from cycles to fractions of
     seconds can be expensive. For this reason, the conversion is a
     quick and fairly rough multiplication operation.

   * Processor cycle rate might change, such as when a laptop goes into
     power-saving mode or when a CPU slows down to reduce heat
     generation. If a processor's cycle rate fluctuates, conversion
     from cycles to real-time units is subject to error.

   * Cycle counters might be unreliable or unavailable depending on the
     processor or the operating system. For example, on Pentiums, the
     instruction is `RDTSC' (an assembly-language rather than a C
     instruction) and it is theoretically possible for the operating
     system to prevent user-mode programs from using it.

   * Some processor details related to out-of-order execution or
     multiprocessor synchronization might cause the counter to seem
     fast or slow by up to 1000 cycles.

Currently, MySQL works with cycle counters on x386 (Windows, Mac OS X,
Linux, Solaris, and other Unix flavors), PowerPC, and IA-64.

The *Note `setup_instruments': setup-instruments-table. table has an
`ENABLED' column to indicate the instruments for which to collect
events. The table also has a `TIMED' column to indicate which
instruments are timed. If an instrument is not enabled, it produces no
events. If an enabled instrument is not timed, events produced by the
instrument have `NULL' for the `TIMER_START', `TIMER_END', and
`TIMER_WAIT' timer values. This in turn causes those values to be
ignored when calculating the sum, minimum, maximum, and average time
values in summary tables.

Within events, times are stored in picoseconds (trillionths of a
second) to normalize them to a standard unit, regardless of which timer
is selected. The timer used for an event is the one in effect when
event timing begins. This timer is used to convert start and end values
to picoseconds for storage in the event.

Modifications to the *Note `setup_timers': setup-timers-table.  table
affect monitoring immediately. Events already in progress use the
original timer for the begin time and the new timer for the end time,
which leads to unpredictable results.  If you make timer changes, you
may want to use *Note `TRUNCATE TABLE': truncate-table. to reset
Performance Schema statistics.

The timer baseline (`time zero') occurs at Performance Schema
initialization during server startup.  `TIMER_START' and `TIMER_END'
values in events represent picoseconds since the baseline. `TIMER_WAIT'
values are durations in picoseconds.

Picosecond values in events are approximate. Their accuracy is subject
to the usual forms of error associated with conversion from one unit to
another. If the `CYCLE' timer is used and the processor rate varies,
there might be drift. For these reasons, it is not reasonable to look
at the `TIMER_START' value for an event as an accurate measure of time
elapsed since server startup. On the other hand, it is reasonable to use
`TIMER_START' or `TIMER_WAIT' values in `ORDER BY' clauses to order
events by start time or duration.

The choice of picoseconds in events rather than a value such as
microseconds has a performance basis. One implementation goal was to
show results in a uniform time unit, regardless of the timer. In an
ideal world this time unit would look like a wall-clock unit and be
reasonably precise; in other words, microseconds. But to convert cycles
or nanoseconds to microseconds, it would be necessary to perform a
division for every instrumentation. Division is expensive on many
platforms. Multiplication is not expensive, so that is what is used.
Therefore, the time unit is an integer multiple of the highest possible
`TIMER_FREQUENCY' value, using a multiplier large enough to ensure that
there is no major precision loss. The result is that the time unit is
`picoseconds.' This precision is spurious, but the decision enables
overhead to be minimized.


File: manual.info,  Node: performance-schema-filtering,  Next: performance-schema-instrumentation-checking,  Prev: performance-schema-timing,  Up: performance-schema-runtime-configuration

21.2.3.2 Performance Schema Event Filtering
...........................................

* Menu:

* performance-schema-pre-filtering::  Event Pre-Filtering
* performance-schema-filtering-names::  Naming Instruments or Consumers for Filtering Operations

Events are processed in a producer/consumer fashion:

   * Instrumented code is the source for events and produces events to
     be collected. The *Note `setup_instruments':
     setup-instruments-table. table lists the instruments for which
     events can be collected, whether they are enabled, and whether to
     collect timing information:

          mysql> SELECT * FROM setup_instruments;
          +------------------------------------------------------------+---------+-------+
          | NAME                                                       | ENABLED | TIMED |
          +------------------------------------------------------------+---------+-------+
          ...
          | wait/synch/mutex/sql/LOCK_global_read_lock                 | YES     | YES   |
          | wait/synch/mutex/sql/LOCK_global_system_variables          | YES     | YES   |
          | wait/synch/mutex/sql/LOCK_lock_db                          | YES     | YES   |
          | wait/synch/mutex/sql/LOCK_manager                          | YES     | YES   |
          ...
          | wait/synch/rwlock/sql/LOCK_grant                           | YES     | YES   |
          | wait/synch/rwlock/sql/LOGGER::LOCK_logger                  | YES     | YES   |
          | wait/synch/rwlock/sql/LOCK_sys_init_connect                | YES     | YES   |
          | wait/synch/rwlock/sql/LOCK_sys_init_slave                  | YES     | YES   |
          ...
          | wait/io/file/sql/binlog                                    | YES     | YES   |
          | wait/io/file/sql/binlog_index                              | YES     | YES   |
          | wait/io/file/sql/casetest                                  | YES     | YES   |
          | wait/io/file/sql/dbopt                                     | YES     | YES   |
          ...

   * Performance Schema tables are the destinations for events and
     consume events. The *Note `setup_consumers':
     setup-consumers-table. table lists the types of consumers to which
     event information can be sent:

          mysql> SELECT * FROM setup_consumers;
          +----------------------------------------------+---------+
          | NAME                                         | ENABLED |
          +----------------------------------------------+---------+
          | events_waits_current                         | YES     |
          | events_waits_history                         | YES     |
          | events_waits_history_long                    | YES     |
          | events_waits_summary_by_thread_by_event_name | YES     |
          | events_waits_summary_by_event_name           | YES     |
          | events_waits_summary_by_instance             | YES     |
          | file_summary_by_event_name                   | YES     |
          | file_summary_by_instance                     | YES     |
          +----------------------------------------------+---------+

Filtering can be done at different stages of performance monitoring:

   * *Pre-filtering.* This is done by modifying Performance Schema
     configuration so that only certain types of events are collected
     from producers, and collected events update only certain
     consumers. This type of filtering is done by the Performance
     Schema and has a global effect that applies to all users.

     Reasons to use pre-filtering:

        * Pre-filtering reduces overhead. The overhead should be
          minimal even with all instruments enabled, but perhaps you
          want to reduce it further. Or you do not care about timing
          events and want to disable the timing code to eliminate
          timing overhead.

        * You can avoid filling the current-events or history tables
          with events in which you have no interest.  Pre-filtering
          leaves more `room' in these tables for instances of rows for
          enabled instrument types. If you enable only file instruments
          with pre-filtering, no rows are collected for nonfile
          instruments. With post-filtering, nonfile events are
          collected, leaving fewer rows for file events.

        * You can avoid maintaining some kinds of event tables.  If you
          disable a consumer, the server does not spend time
          maintaining it. For example, if you do not care about event
          histories, you can disable the history table consumers to
          improve performance.

   * *Post-filtering.* This involves the use of `WHERE' clauses in
     queries that select information from Performance Schema tables, to
     specify which of the available events you want to see. This type
     of filtering is performed on a per-user basis because individual
     users select which of the available events are of interest.

     Reasons to use post-filtering:

        * To avoid making decisions for individual users about which
          event information is of interest.

        * To use the Performance Schema to investigate a performance
          issue when the restrictions to impose using pre-filtering are
          not known in advance.

The following sections provide more detail about pre-filtering and
provide guidelines for naming instruments or consumers in filtering
operations. For information about writing queries to retrieve
information (post-filtering), see *Note performance-schema-queries::.


File: manual.info,  Node: performance-schema-pre-filtering,  Next: performance-schema-filtering-names,  Prev: performance-schema-filtering,  Up: performance-schema-filtering

21.2.3.3 Event Pre-Filtering
............................

Pre-filtering is done by modifying Performance Schema configuration so
that only certain types of events are collected from producers, and
collected events update only certain consumers. This type of filtering
is done by the Performance Schema and has a global effect that applies
to all users.

Pre-filtering can be applied to either the producer or consumer stage
of event processing:

   * To affect pre-filtering at the producer stage, modify the *Note
     `setup_instruments': setup-instruments-table.  table. An
     instrument can be enabled or disabled by setting its `ENABLED'
     value to `YES' or `NO'. An instrument can be configured whether to
     collect timing information by setting its `TIMED' value to `YES' or
     `NO'.

   * To affect pre-filtering at the consumer stage, modify the *Note
     `setup_consumers': setup-consumers-table. table.  A consumer can
     be enabled or disabled by setting its `ENABLED' value to `YES' or
     `NO'.

Here are some examples that show the types of pre-filtering operations
available:

   * Disable all instruments:

          mysql> UPDATE setup_instruments SET ENABLED = 'NO';

     Now no events will be collected. This change, like other
     pre-filtering operations, affects other users as well, even if
     they want to see event information.

   * Disable all file instruments, adding them to the current set of
     disabled instruments:

          mysql> UPDATE setup_instruments SET ENABLED = 'NO'
              -> WHERE NAME LIKE 'wait/io/file/%';

   * Disable only file instruments, enable all other instruments:

          mysql> UPDATE setup_instruments
              -> SET ENABLED = IF(NAME LIKE 'wait/io/file/%', 'NO', 'YES');

     The preceding queries use the `LIKE' operator and the pattern
     `'wait/io/file/%'' to match all instrument names that begin with
     `'wait/io/file/'. For additional information about specifying
     patterns to select instruments, see *Note
     performance-schema-filtering-names::.

   * Enable all but those instruments in the `mysys' library:

          mysql> UPDATE setup_instruments
              -> SET ENABLED = CASE WHEN NAME LIKE '%/mysys/%' THEN 'YES' ELSE 'NO' END;

   * Disable a specific instrument:

          mysql> UPDATE setup_instruments SET ENABLED = 'NO'
              -> WHERE NAME = 'wait/synch/mutex/mysys/TMPDIR_mutex';

   * To toggle the state of an instrument, `flip' its `ENABLED' value:

          mysql> UPDATE setup_instruments
              -> SET ENABLED = IF(ENABLED = 'YES', 'NO', 'YES')
              -> WHERE NAME = 'wait/synch/mutex/mysys/TMPDIR_mutex';

   * Disable timing for all events:

          mysql> UPDATE setup_instruments SET TIMED = 'NO';

Setting the `TIMED' column for instruments affects Performance Schema
table contents as described in *Note performance-schema-timing::.

When you change the monitoring configuration, the Performance Schema
does not flush the history tables. Events already collected remain in
the current-events and history tables until displaced by newer events.
If you disable instruments, you might need to wait a while before events
for them are displaced by newer events of interest.  Alternatively, use
*Note `TRUNCATE TABLE': truncate-table. to empty the history tables.

After making instrumentation changes, you might want to truncate the
summary tables as well to clear aggregate information for previously
collected events. The effect of *Note `TRUNCATE TABLE': truncate-table.
for summary tables is to reset the summary columns to 0 or `NULL', not
to remove rows.

If you disable a consumer, the server does not spend time maintaining
it. For example, you can disable the history table consumers if you do
not care about historical event information:

     mysql> UPDATE setup_consumers
         -> SET ENABLED = 'NO' WHERE NAME LIKE '%history%';


File: manual.info,  Node: performance-schema-filtering-names,  Prev: performance-schema-pre-filtering,  Up: performance-schema-filtering

21.2.3.4 Naming Instruments or Consumers for Filtering Operations
.................................................................

Names given for filtering operations can be as specific or general as
required. To indicate a single instrument or consumer, specify its name
in full:

     mysql> UPDATE setup_instruments
         -> SET ENABLED = 'NO'
         -> WHERE NAME = 'wait/synch/mutex/myisammrg/MYRG_INFO::mutex';

     mysql> UPDATE setup_consumers
         -> SET ENABLED = 'NO' WHERE NAME = 'file_summary_by_instance';

To specify a group of instruments or consumers, use a pattern that
matches the group members:

     mysql> UPDATE setup_instruments
         -> SET ENABLED = 'NO'
         -> WHERE NAME LIKE 'wait/synch/mutex/%';

     mysql> UPDATE setup_consumers
         -> SET ENABLED = 'NO' WHERE NAME LIKE '%history%';

If you use a pattern, it should be chosen so that it matches all the
items of interest and no others. For example, to select all file I/O
instruments, it is better to use a pattern that includes the entire
instrument name prefix:

     ... WHERE NAME LIKE 'wait/io/file/%';

A pattern of `'%/file/%'' will match other instruments that have a
component of `'/file/'' anywhere in the name. Even less suitable is the
pattern `'%file%'' because it will match instruments with `'file''
anywhere in the name, such as `wait/synch/mutex/sql/LOCK_des_key_file'.

To check which instrument or consumer names a pattern matches, perform
a simple test:

     mysql> SELECT NAME FROM setup_instruments WHERE NAME LIKE 'PATTERN';

     mysql> SELECT NAME FROM setup_consumers WHERE NAME LIKE 'PATTERN';

For information about the types of names that are supported, see *Note
performance-schema-instrument-naming::.


File: manual.info,  Node: performance-schema-instrumentation-checking,  Prev: performance-schema-filtering,  Up: performance-schema-runtime-configuration

21.2.3.5 Determining What Is Instrumented
.........................................

It is always possible to determine what instruments the Performance
Schema includes by checking the *Note `setup_instruments':
setup-instruments-table. table. For example, to see what file-related
events are instrumented for the `InnoDB' storage engine, use this query:

     mysql> SELECT * FROM setup_instruments WHERE NAME LIKE 'wait/io/file/innodb/%';
     +--------------------------------------+---------+-------+
     | NAME                                 | ENABLED | TIMED |
     +--------------------------------------+---------+-------+
     | wait/io/file/innodb/innodb_data_file | YES     | YES   |
     | wait/io/file/innodb/innodb_log_file  | YES     | YES   |
     | wait/io/file/innodb/innodb_temp_file | YES     | YES   |
     +--------------------------------------+---------+-------+

An exhaustive description of precisely what is instrumented is not
given in this documentation, for several reasons:

   * What is instrumented is the server code. Changes to this code
     occur often, which also affects the set of instruments.

   * It is not practical to list all the instruments because there are
     hundreds of them.

   * As described earlier, it is possible to find out by querying the
     *Note `setup_instruments': setup-instruments-table. table. This
     information is always up to date for your version of MySQL, also
     includes instrumentation for instrumented plugins you might have
     installed that are not part of the core server, and can be used by
     automated tools.


File: manual.info,  Node: performance-schema-queries,  Next: performance-schema-instrument-naming,  Prev: performance-schema-configuration,  Up: performance-schema

21.3 Performance Schema Queries
===============================

Pre-filtering limits which event information is collected and is
independent of any particular user. By contrast, post-filtering is
performed by individual users through the use of queries with
appropriate `WHERE' clauses that restrict what event information to
select from the events available after pre-filtering has been applied.

In *Note performance-schema-pre-filtering::, an example showed how to
pre-filter for file instruments. If the event tables contain both file
and nonfile information, post-filtering is another way to see
information only for file events. Add a `WHERE' clause to queries to
restrict event selection appropriately:

     mysql> SELECT THREAD_ID, NUMBER_OF_BYTES
         -> FROM events_waits_history
         -> WHERE EVENT_NAME LIKE 'wait/io/file/%'
         -> AND NUMBER_OF_BYTES IS NOT NULL;
     +-----------+-----------------+
     | THREAD_ID | NUMBER_OF_BYTES |
     +-----------+-----------------+
     |        11 |              66 |
     |        11 |              47 |
     |        11 |             139 |
     |         5 |              24 |
     |         5 |             834 |
     +-----------+-----------------+


File: manual.info,  Node: performance-schema-instrument-naming,  Next: performance-schema-status-monitoring,  Prev: performance-schema-queries,  Up: performance-schema

21.4 Performance Schema Instrument Naming Conventions
=====================================================

An instrument name consists of a sequence of components separated by
`'/'' characters. Example names:

     wait/io/file/myisam/log
     wait/io/file/mysys/charset
     wait/synch/cond/mysys/COND_alarm
     wait/synch/cond/sql/BINLOG::update_cond
     wait/synch/mutex/mysys/BITMAP_mutex
     wait/synch/mutex/sql/LOCK_delete
     wait/synch/rwlock/innodb/trx_sys_lock
     wait/synch/rwlock/sql/Query_cache_query::lock

The instrument name space has a tree-like structure. The components of
an instrument name from left to right provide a progression from more
general to more specific. The number of components a name has depends
on the type of instrument.

The interpretation of a given component in a name depends on the
components to the left of it. For example, `myisam' appears in both of
the following names, but `myisam' in the first name is related to file
I/O, whereas in the second it is related to a synchronization
instrument:

     wait/io/file/myisam/log
     wait/synch/cond/myisam/MI_SORT_INFO::cond

Instrument names consist of a prefix with a structure defined by the
Performance Schema implementation and a suffix defined by the developer
implementing the instrument code. The top-level component of an
instrument prefix indicates the type of instrument. This component also
determines which event timer in the `setup_timers' table applies to the
instrument. For the prefix part of instrument names, the top level
indicates the type of instrument.

The suffix part of instrument names comes from the code for the
instruments themselves. Suffixes may include levels such as these:

   * A name for the major component (a server module such as `myisam',
     `innodb', `mysys', or `sql') or a plugin name.

   * The name of a variable in the code, in the form XXX (a global
     variable) or `CCC::MMM' (a member MMM in class CCC). Examples:
     `COND_thread_cache', `THR_LOCK_myisam', `BINLOG::LOCK_index'.

In MySQL 5.5, there is a single top-level component, `wait', indicating
a wait instrument. The naming tree for wait instruments has this
structure:

   * `wait/io'

     An instrumented I/O operation.

        * `wait/io/file'

          An instrumented file I/O operation. For files, the wait is
          the time waiting for the file operation to complete (for
          example, a call to `fwrite()'). Due to caching, the physical
          file I/O on the disk might not happen within this call.

   * `wait/synch'

     An instrumented synchronization object. For synchronization
     objects, the `TIMER_WAIT' time includes the amount of time blocked
     while attempting to acquire a lock on the object, if any.

        * `wait/synch/cond'

          A condition is used by one thread to signal to other threads
          that something they were waiting for has happened.  If a
          single thread was waiting for a condition, it can wake up and
          proceed with its execution. If several threads were waiting,
          they can all wake up and compete for the resource for which
          they were waiting.

        * `wait/synch/mutex'

          A mutual exclusion object used to permit access to a resource
          (such as a section of executable code) while preventing other
          threads from accessing the resource.

        * `wait/synch/rwlock'

          A read/write lock object used to lock a specific variable for
          access while preventing its use by other threads. A shared
          read lock can be acquired simultaneously by multiple threads.
          An exclusive write lock can be acquired by only one thread at
          a time.


File: manual.info,  Node: performance-schema-status-monitoring,  Next: performance-schema-table-characteristics,  Prev: performance-schema-instrument-naming,  Up: performance-schema

21.5 Performance Schema Status Monitoring
=========================================

There are several status variables associated with the Performance
Schema:

     mysql> SHOW STATUS LIKE 'perf%';
     +------------------------------------------+-------+
     | Variable_name                            | Value |
     +------------------------------------------+-------+
     | Performance_schema_cond_classes_lost     | 0     |
     | Performance_schema_cond_instances_lost   | 0     |
     | Performance_schema_file_classes_lost     | 0     |
     | Performance_schema_file_handles_lost     | 0     |
     | Performance_schema_file_instances_lost   | 0     |
     | Performance_schema_locker_lost           | 0     |
     | Performance_schema_mutex_classes_lost    | 0     |
     | Performance_schema_mutex_instances_lost  | 0     |
     | Performance_schema_rwlock_classes_lost   | 0     |
     | Performance_schema_rwlock_instances_lost | 0     |
     | Performance_schema_table_handles_lost    | 0     |
     | Performance_schema_table_instances_lost  | 0     |
     | Performance_schema_thread_classes_lost   | 0     |
     | Performance_schema_thread_instances_lost | 0     |
     +------------------------------------------+-------+

The Performance Schema status variables provide information about
instrumentation that could not be loaded or created due to memory
constraints. Names for these variables have several forms:

   * `Performance_schema_XXX_classes_lost' indicates how many
     instruments of type XXX could not be loaded.

   * `Performance_schema_XXX_instances_lost' indicates how many
     instances of object type XXX could not be created.

   * `Performance_schema_XXX_handles_lost' indicates how many instances
     of object type XXX could not be opened.

   * `Performance_schema_locker_lost' indicates how many events are
     `lost' or not recorded.

For example, if a mutex is instrumented in the server source but the
server cannot allocate memory for the instrumentation at runtime, it
increments `Performance_schema_mutex_classes_lost'.  The mutex still
functions as a synchronization object (that is, the server continues to
function normally), but performance data for it will not be collected.
If the instrument can be allocated, it can be used for initializing
instrumented mutex instances. For a singleton mutex such as a global
mutex, there will be only one instance. Other mutexes have an instance
per connection, or per page in various caches and data buffers, so the
number of instances varies over time. Increasing the maximum number of
connections or the maximum size of some buffers will increase the
maximum number of instances that might be allocated at once. If the
server cannot create a given instrumented mutex instance, it increments
`Performance_schema_mutex_instances_lost'.

Suppose that the following conditions hold:

   * The server was started with the
     `--performance_schema_max_mutex_classes=200' option and thus has
     room for 200 mutex instruments.

   * 150 mutex instruments have been loaded already.

   * The plugin named `plugin_a' contains 40 mutex instruments.

   * The plugin named `plugin_b' contains 20 mutex instruments.

The server allocates mutex instruments for the plugins depending on how
many they need and how many are available, as illustrated by the
following sequence of statements:

     INSTALL PLUGIN plugin_a

The server now has 150+40 = 190 mutex instruments.

     UNINSTALL PLUGIN plugin_a;

The server still has 190 instruments. All the historical data generated
by the plugin code is still available, but new events for the
instruments are not collected.

     INSTALL PLUGIN plugin_a;

The server detects that the 40 instruments are already defined, so no
new instruments are created, and previously assigned internal memory
buffers are reused. The server still has 190 instruments.

     INSTALL PLUGIN plugin_b;

The server has room for 200-190 = 10 instruments (in this case, mutex
classes), and sees that the plugin contains 20 new instruments. 10
instruments are loaded, and 10 are discarded or `lost.' The
`Performance_schema_mutex_classes_lost' indicates the number of
instruments (mutex classes) lost:

     mysql> SHOW STATUS LIKE "perf%mutex_classes_lost";
     +---------------------------------------+-------+
     | Variable_name                         | Value |
     +---------------------------------------+-------+
     | Performance_schema_mutex_classes_lost | 10    |
     +---------------------------------------+-------+
     1 row in set (0.10 sec)

The instrumentation still works and collects (partial) data for
`plugin_b'.

When the server cannot create a mutex instrument, these results occur:

   * No row for the instrument is inserted into the *Note
     `setup_instruments': setup-instruments-table. table.

   * `Performance_schema_mutex_classes_lost' increases by 1.

   * `Performance_schema_mutex_instances_lost' does not change. (When
     the mutex instrument is not created, it cannot be used to create
     instrumented mutex instances later.)

The pattern just described applies to all types of instruments, not
just mutexes.

A value of `Performance_schema_mutex_classes_lost' greater than 0 can
happen in two cases:

   * To save a few bytes of memory, you start the server with
     `--performance_schema_max_mutex_classes=N', where N is less than
     the default value. The default value is chosen to be sufficient to
     load all the plugins provided in the MySQL distribution, but this
     can be reduced if some plugins are never loaded. For example, you
     might choose not to load some of the storage engines in the
     distribution.

   * You load a third-party plugin that is instrumented for the
     Performance Schema but do not allow for the plugin's
     instrumentation memory requirements when you start the server.
     Because it comes from a third party, the instrument memory
     consumption of this engine is not accounted for in the default
     value chosen for `performance_schema_max_mutex_classes'.

     If the server has insufficient resources for the plugin's
     instruments and you do not explicitly allocate more using
     `--performance_schema_max_mutex_classes=N', loading the plugin
     leads to starvation of instruments.

If the value chosen for `performance_schema_max_mutex_classes' is too
small, no error is reported in the error log and there is no failure at
runtime. However, the content of the tables in the `performance_schema'
database will miss events.  The `Performance_schema_mutex_classes_lost'
status variable is the only visible sign to indicate that some events
were dropped internally due to failure to create instruments.

If an instrument is not lost, it is known to the Performance Schema,
and is used when instrumenting instances. For example,
`wait/synch/mutex/sql/LOCK_delete' is the name of a mutex instrument in
the *Note `setup_instruments': setup-instruments-table. table. This
single instrument is used when creating a mutex in the code (in
`THD::LOCK_delete') however many instances of the mutex are needed as
the server runs. In this case, `LOCK_delete' is a mutex that is per
connection (`THD'), so if a server has 1000 connections, there are 1000
threads, and 1000 instrumented `LOCK_delete' mutex instances
(`THD::LOCK_delete').

If the server does not have room for all these 1000 instrumented
mutexes (instances), some mutexes are created with instrumentation, and
some are created without instrumentation. If the server can create only
800 instances, 200 instances are lost.  The server continues to run,
but increments `Performance_schema_mutex_instances_lost' by 200 to
indicate that instances could not be created.

A value of `Performance_schema_mutex_instances_lost' greater than 0 can
happen when the code initializes more mutexes at runtime than were
allocated for `--performance_schema_max_mutex_instances=N'.

The bottom line is that if *Note `SHOW STATUS LIKE 'perf%'':
show-status. says that nothing was lost (all values are zero), the
Performance Schema data is accurate and can be relied upon. If
something was lost, the data is incomplete, and the Performance Schema
could not record everything given the insufficient amount of memory it
was given to use. In this case, the specific
`Performance_schema_XXX_lost' variable indicates the problem area.

It might be appropriate in some cases to cause deliberate instrument
starvation. For example, if you do not care about performance data for
file I/O, you can start the server with all Performance Schema
parameters related to file I/O set to 0. No memory will be allocated
for file-related classes, instances, or handles, and all file events
will be lost.

Use *Note `SHOW ENGINE PERFORMANCE_SCHEMA STATUS': show-engine. to
inspect the internal operation of the Performance Schema code:

     mysql> SHOW ENGINE PERFORMANCE_SCHEMA STATUS\G
     ...
     *************************** 3. row ***************************
       Type: performance_schema
       Name: events_waits_history.row_size
     Status: 76
     *************************** 4. row ***************************
       Type: performance_schema
       Name: events_waits_history.row_count
     Status: 10000
     *************************** 5. row ***************************
       Type: performance_schema
       Name: events_waits_history.memory
     Status: 760000
     ...
     *************************** 57. row ***************************
       Type: performance_schema
       Name: performance_schema.memory
     Status: 26459600
     ...

This statement is intended to help the DBA understand the effects that
different Performance Schema options have on memory requirements. For a
description of the field meanings, see *Note show-engine::.


File: manual.info,  Node: performance-schema-table-characteristics,  Next: performance-schema-table-descriptions,  Prev: performance-schema-status-monitoring,  Up: performance-schema

21.6 Performance Schema General Table Characteristics
=====================================================

The name of the `performance_schema' database is lowercase, as are the
names of tables within it. Queries should specify the names in
lowercase.

Most tables in the `performance_schema' database are read only and
cannot be modified. Some of the setup tables have columns that can be
modified to affect Performance Schema operation. Truncation is
permitted to clear collected events, so *Note `TRUNCATE TABLE':
truncate-table. can be used on tables containing those kinds of
information, such as tables named with a prefix of `events_waits_'.

*Note `TRUNCATE TABLE': truncate-table. can also be used with summary
tables, but the effect is to reset the summary columns to 0 or `NULL',
not to remove rows.

Privileges are as for other databases and tables:

   * To retrieve from `performance_schema' tables, you must have the
     `SELECT' privilege.

   * To change those columns that can be modified, you must have the
     `UPDATE' privilege.

   * To truncate tables that can be truncated, you must have the `DROP'
     privilege.


File: manual.info,  Node: performance-schema-table-descriptions,  Next: performance-schema-option-variable-reference,  Prev: performance-schema-table-characteristics,  Up: performance-schema

21.7 Performance Schema Table Descriptions
==========================================

* Menu:

* performance-schema-table-index::  Performance Schema Table Index
* performance-schema-setup-tables::  Performance Schema Setup Tables
* performance-schema-instance-tables::  Performance Schema Instance Tables
* performance-schema-waits-tables::  Performance Schema Wait Event Tables
* performance-schema-summary-tables::  Performance Schema Summary Tables
* performance-schema-miscellaneous-tables::  Performance Schema Miscellaneous Tables

Tables in the `performance_schema' database can be grouped as follows:

   * Setup tables. These tables are used to configure and display
     monitoring characteristics.

   * Current events table. The *Note `events_waits_current':
     events-waits-current-table. table contains the most recent event
     for each thread.

   * History tables. These tables have the same structure as *Note
     `events_waits_current': events-waits-current-table. but contain
     more rows. The *Note `events_waits_history':
     events-waits-history-table. table contains the most recent 10
     events per thread.  *Note `events_waits_history_long':
     events-waits-history-long-table.  contains the most recent 10,000
     events.

     To change the sizes of these tables, set the
     `performance_schema_events_waits_history_size' and
     `performance_schema_events_waits_history_long_size' system
     variables at server startup.

   * Summary tables. These tables contain information aggregated over
     groups of events, including those that have been discarded from
     the history tables.

   * Instance tables. These tables document what types of objects are
     instrumented. An instrumented object, when used by the server,
     produces an event. These tables provide event names and
     explanatory notes or status information.

   * Miscellaneous tables. These do not fall into any of the other
     table groups.


File: manual.info,  Node: performance-schema-table-index,  Next: performance-schema-setup-tables,  Prev: performance-schema-table-descriptions,  Up: performance-schema-table-descriptions

21.7.1 Performance Schema Table Index
-------------------------------------

The following table lists each Performance Schema table and provides a
short description of each one.

*Performance Schema Tables*

Table Name                               Description
*Note `cond_instances':                  synchronization object instances
cond-instances-table.                    
*Note `events_waits_current':            Current wait events
events-waits-current-table.              
*Note `events_waits_history':            Most recent wait events for
events-waits-history-table.              each thread
*Note `events_waits_history_long':       Most recent wait events overall
events-waits-history-long-table.         
*Note                                    Wait events per instance
`events_waits_summary_by_instance':      
event-wait-summary-tables.               
*Note                                    Wait events per thread and
`events_waits_summary_by_thread_by_event_name':event name
event-wait-summary-tables.               
*Note                                    Wait events per event name
`events_waits_summary_global_by_event_name':
event-wait-summary-tables.               
*Note `file_instances':                  File instances
file-instances-table.                    
*Note `file_summary_by_event_name':      File events per event name
file-summary-tables.                     
*Note `file_summary_by_instance':        File events per file instance
file-summary-tables.                     
*Note `mutex_instances':                 Mutex synchronization object
mutex-instances-table.                   instances
*Note `performance_timers':              Which event timers are available
performance-timers-table.                
*Note `rwlock_instances':                Lock synchronization object
rwlock-instances-table.                  instances
*Note `setup_consumers':                 Consumers for which event
setup-consumers-table.                   information can be stored
*Note `setup_instruments':               Classes of instrumented objects
setup-instruments-table.                 for which events can be
                                         collected
*Note `setup_timers':                    Current event timer
setup-timers-table.                      
*Note `threads': threads-table.          Information about server threads


File: manual.info,  Node: performance-schema-setup-tables,  Next: performance-schema-instance-tables,  Prev: performance-schema-table-index,  Up: performance-schema-table-descriptions

21.7.2 Performance Schema Setup Tables
--------------------------------------

* Menu:

* setup-consumers-table::        The `setup_consumers' Table
* setup-instruments-table::      The `setup_instruments' Table
* setup-timers-table::           The `setup_timers' Table

The setup tables provide information about the current instrumentation
and enable the monitoring configuration to be changed. For this reason,
some columns in these tables can be changed if you have the `UPDATE'
privilege.

The use of tables rather than individual variables for setup
information provides a high degree of flexibility in modifying
Performance Schema configuration. For example, you can use a single
statement with standard SQL syntax to make multiple simultaneous
configuration changes.

These setup tables are available:

   * *Note `setup_consumers': setup-consumers-table.: The types of
     consumers for which event information can be stored

   * *Note `setup_instruments': setup-instruments-table.: The classes
     of instrumented objects for which events can be collected

   * *Note `setup_timers': setup-timers-table.: The current event timer


File: manual.info,  Node: setup-consumers-table,  Next: setup-instruments-table,  Prev: performance-schema-setup-tables,  Up: performance-schema-setup-tables

21.7.2.1 The `setup_consumers' Table
....................................

The *Note `setup_consumers': setup-consumers-table. table lists the
types of consumers for which event information can be stored:

     mysql> SELECT * FROM setup_consumers;
     +----------------------------------------------+---------+
     | NAME                                         | ENABLED |
     +----------------------------------------------+---------+
     | events_waits_current                         | YES     |
     | events_waits_history                         | YES     |
     | events_waits_history_long                    | YES     |
     | events_waits_summary_by_thread_by_event_name | YES     |
     | events_waits_summary_by_event_name           | YES     |
     | events_waits_summary_by_instance             | YES     |
     | file_summary_by_event_name                   | YES     |
     | file_summary_by_instance                     | YES     |
     +----------------------------------------------+---------+

The *Note `setup_consumers': setup-consumers-table. table has these
columns:

   * `NAME'

     The consumer name.

   * `ENABLED'

     Whether the consumer is enabled. This column can be modified. If
     you disable a consumer, the server does not spend time adding
     event information to it.

Disabling the `events_waits_current' consumer disables everything else
that depends on waits, such as the *Note `events_waits_history':
events-waits-history-table. and *Note `events_waits_history_long':
events-waits-history-long-table. tables, and all summary tables.


File: manual.info,  Node: setup-instruments-table,  Next: setup-timers-table,  Prev: setup-consumers-table,  Up: performance-schema-setup-tables

21.7.2.2 The `setup_instruments' Table
......................................

The *Note `setup_instruments': setup-instruments-table. table lists
classes of instrumented objects for which events can be collected:

     mysql> SELECT * FROM setup_instruments;
     +------------------------------------------------------------+---------+-------+
     | NAME                                                       | ENABLED | TIMED |
     +------------------------------------------------------------+---------+-------+
     ...
     | wait/synch/mutex/sql/LOCK_global_read_lock                 | YES     | YES   |
     | wait/synch/mutex/sql/LOCK_global_system_variables          | YES     | YES   |
     | wait/synch/mutex/sql/LOCK_lock_db                          | YES     | YES   |
     | wait/synch/mutex/sql/LOCK_manager                          | YES     | YES   |
     ...
     | wait/synch/rwlock/sql/LOCK_grant                           | YES     | YES   |
     | wait/synch/rwlock/sql/LOGGER::LOCK_logger                  | YES     | YES   |
     | wait/synch/rwlock/sql/LOCK_sys_init_connect                | YES     | YES   |
     | wait/synch/rwlock/sql/LOCK_sys_init_slave                  | YES     | YES   |
     ...
     | wait/io/file/sql/binlog                                    | YES     | YES   |
     | wait/io/file/sql/binlog_index                              | YES     | YES   |
     | wait/io/file/sql/casetest                                  | YES     | YES   |
     | wait/io/file/sql/dbopt                                     | YES     | YES   |
     ...

Each instrument added to the source code provides a row for this table,
even when the instrumented code is not executed.  When an instrument is
enabled and executed, instrumented instances are created, which are
visible in the `*_instances' tables.

The *Note `setup_instruments': setup-instruments-table. table has these
columns:

   * `NAME'

     The instrument name. Instrument names have multiple parts and form
     a hierarchy, as discussed in *Note
     performance-schema-instrument-naming::.  Events produced from
     execution of an instrument have an `EVENT_NAME' value that is
     taken from the instrument `NAME' value. (Events do not really have
     a `name,' but this provides a way to associate events with
     instruments.)

   * `ENABLED'

     Whether the instrument is enabled. This column can be modified. A
     disabled instrument produces no events.

   * `TIMED'

     Whether the instrument is timed. This column can be modified.

     If an enabled instrument is not timed, the instrument code is
     enabled, but the timer is not. Events produced by the instrument
     have `NULL' for the `TIMER_START', `TIMER_END', and `TIMER_WAIT'
     timer values. This in turn causes those values to be ignored when
     calculating the sum, minimum, maximum, and average time values in
     summary tables.


File: manual.info,  Node: setup-timers-table,  Prev: setup-instruments-table,  Up: performance-schema-setup-tables

21.7.2.3 The `setup_timers' Table
.................................

The *Note `setup_timers': setup-timers-table. table shows the currently
selected event timer:

     mysql> SELECT * FROM setup_timers;
     +------+------------+
     | NAME | TIMER_NAME |
     +------+------------+
     | wait | CYCLE      |
     +------+------------+

The `setup_timers.TIMER_NAME' value can be changed to select a
different timer. The value can be any of the values in the
`performance_timers.TIMER_NAME' column. For an explanation of how event
timing occurs, see *Note performance-schema-timing::.

Modifications to the *Note `setup_timers': setup-timers-table.  table
affect monitoring immediately. Events already in progress use the
original timer for the begin time and the new timer for the end time,
which leads to unpredictable results.  If you make timer changes, you
may want to use *Note `TRUNCATE TABLE': truncate-table. to reset
Performance Schema statistics.

The *Note `setup_timers': setup-timers-table. table has these columns:

   * `NAME'

     The type of instrument the timer is used for.

   * `TIMER_NAME'

     The timer that applies to the instrument type. This column can be
     modified.


File: manual.info,  Node: performance-schema-instance-tables,  Next: performance-schema-waits-tables,  Prev: performance-schema-setup-tables,  Up: performance-schema-table-descriptions

21.7.3 Performance Schema Instance Tables
-----------------------------------------

* Menu:

* cond-instances-table::         The `cond_instances' Table
* file-instances-table::         The `file_instances' Table
* mutex-instances-table::        The `mutex_instances' Table
* rwlock-instances-table::       The `rwlock_instances' Table

Instance tables document what types of objects are instrumented.  They
provide event names and explanatory notes or status information:

   * *Note `cond_instances': cond-instances-table.: Condition
     synchronization object instances

   * *Note `file_instances': file-instances-table.: File instances

   * *Note `mutex_instances': mutex-instances-table.: Mutex
     synchronization object instances

   * *Note `rwlock_instances': rwlock-instances-table.: Lock
     synchronization object instances

These tables list instrumented synchronization objects and files. There
are three types of synchronization objects: `cond', `mutex', and
`rwlock'. Each instance table has an `EVENT_NAME' or `NAME' column to
indicate the instrument associated with each row. Instrument names have
multiple parts and form a hierarchy, as discussed in *Note
performance-schema-instrument-naming::.

The `mutex_instances.LOCKED_BY_THREAD_ID' and
`rwlock_instances.WRITE_LOCKED_BY_THREAD_ID' columns are extremely
important for investigating performance bottlenecks or deadlocks. For
examples of how to use them for this purpose, see *Note
performance-schema-examples::


File: manual.info,  Node: cond-instances-table,  Next: file-instances-table,  Prev: performance-schema-instance-tables,  Up: performance-schema-instance-tables

21.7.3.1 The `cond_instances' Table
...................................

The *Note `cond_instances': cond-instances-table. table lists all the
conditions seen by the Performance Schema while the server executes. A
condition is a synchronization mechanism used in the code to signal
that a specific event has happened, so that a thread waiting for this
condition can resume work.

When a thread is waiting for something to happen, the condition name is
an indication of what the thread is waiting for, but there is no
immediate way to tell which other thread, or threads, will cause the
condition to happen.

The *Note `cond_instances': cond-instances-table. table has these
columns:

   * `NAME'

     The instrument name associated with the condition.

   * `OBJECT_INSTANCE_BEGIN'

     The address in memory of the condition that was instrumented.


File: manual.info,  Node: file-instances-table,  Next: mutex-instances-table,  Prev: cond-instances-table,  Up: performance-schema-instance-tables

21.7.3.2 The `file_instances' Table
...................................

The *Note `file_instances': file-instances-table. table lists all the
files seen by the Performance Schema when executing file I/O
instrumentation. If a file on disk has never been opened, it will not
be in *Note `file_instances': file-instances-table. When a file is
deleted from the disk, it is also removed from the *Note
`file_instances': file-instances-table. table.

The *Note `file_instances': file-instances-table. table has these
columns:

   * `FILE_NAME'

     The file name.

   * `EVENT_NAME'

     The instrument name associated with the file.

   * `OPEN_COUNT'

     The count of open handles on the file. If a file was opened and
     then closed, it was opened 1 time, but `OPEN_COUNT' will be 0. To
     list all the files currently opened by the server, use `WHERE
     OPEN_COUNT > 0'.


File: manual.info,  Node: mutex-instances-table,  Next: rwlock-instances-table,  Prev: file-instances-table,  Up: performance-schema-instance-tables

21.7.3.3 The `mutex_instances' Table
....................................

The *Note `mutex_instances': mutex-instances-table. table lists all the
mutexes seen by the Performance Schema while the server executes. A
mutex is a synchronization mechanism used in the code to enforce that
only one thread at a given time can have access to some common
resource. The resource is said to be `protected' by the mutex.

When two threads executing in the server (for example, two user
sessions executing a query simultaneously) do need to access the same
resource (a file, a buffer, or some piece of data), these two threads
will compete against each other, so that the first query to obtain a
lock on the mutex will cause the other query to wait until the first is
done and unlocks the mutex.

The work performed while holding a mutex is said to be in a `critical
section,' and multiple queries do execute this critical section in a
serialized way (one at a time), which is a potential bottleneck.

The *Note `mutex_instances': mutex-instances-table. table has these
columns:

   * `NAME'

     The instrument name associated with the mutex.

   * `OBJECT_INSTANCE_BEGIN'

     The address in memory of the mutex that was instrumented.

   * `LOCKED_BY_THREAD_ID'

     When a thread currently has a mutex locked, `LOCKED_BY_THREAD_ID'
     is the `THREAD_ID' of the locking thread, otherwise it is `NULL'.

For every mutex instrumented in the code, the Performance Schema
provides the following information.

   * The *Note `setup_instruments': setup-instruments-table. table
     lists the name of the instrumentation point, with the prefix
     `wait/synch/mutex/'.

   * When some code creates a mutex, a row is added to the *Note
     `mutex_instances': mutex-instances-table. table. The
     `OBJECT_INSTANCE_BEGIN' column is a property that uniquely
     identifies the mutex.

   * When a thread attempts to lock a mutex, the *Note
     `events_waits_current': events-waits-current-table. table shows a
     row for that thread, indicating that it is waiting on a mutex (in
     the `EVENT_NAME' column), and indicating which mutex is waited on
     (in the `OBJECT_INSTANCE_BEGIN' column).

   * When a thread succeeds in locking a mutex:

        * *Note `events_waits_current': events-waits-current-table.
          shows that the wait on the mutex is completed (in the
          `TIMER_END' and `TIMER_WAIT' columns)

        * The completed wait event is added to the *Note
          `events_waits_history': events-waits-history-table. and *Note
          `events_waits_history_long': events-waits-history-long-table.
          tables

        * *Note `mutex_instances': mutex-instances-table. shows that
          the mutex is now owned by the thread (in the `THREAD_ID'
          column).

   * When a thread unlocks a mutex, *Note `mutex_instances':
     mutex-instances-table. shows that the mutex now has no owner (the
     `THREAD_ID' column is `NULL').

   * When a mutex object is destroyed, the corresponding row is removed
     from *Note `mutex_instances': mutex-instances-table.

By performing queries on both of the following tables, a monitoring
application or a DBA can detect bottlenecks or deadlocks between
threads that involve mutexes:

   * *Note `events_waits_current': events-waits-current-table, to see
     what mutex a thread is waiting for

   * *Note `mutex_instances': mutex-instances-table, to see which other
     thread currently owns a mutex


File: manual.info,  Node: rwlock-instances-table,  Prev: mutex-instances-table,  Up: performance-schema-instance-tables

21.7.3.4 The `rwlock_instances' Table
.....................................

The *Note `rwlock_instances': rwlock-instances-table. table lists all
the `rwlock' instances (read write locks) seen by the Performance
Schema while the server executes. An `rwlock' is a synchronization
mechanism used in the code to enforce that threads at a given time can
have access to some common resource following certain rules. The
resource is said to be `protected' by the `rwlock'. The access is
either shared (many threads can have a read lock at the same time) or
exclusive (only one thread can have a write lock at a given time).

Depending on how many threads are requesting a lock, and the nature of
the locks requested, access can be either granted in shared mode,
granted in exclusive mode, or not granted at all, waiting for other
threads to finish first.

The *Note `rwlock_instances': rwlock-instances-table. table has these
columns:

   * `NAME'

     The instrument name associated with the lock.

   * `OBJECT_INSTANCE_BEGIN'

     The address in memory of the lock that was instrumented.

   * `WRITE_LOCKED_BY_THREAD_ID'

     When a thread currently has an `rwlock' locked in exclusive
     (write) mode, `WRITE_LOCKED_BY_THREAD_ID' is the `THREAD_ID' of
     the locking thread, otherwise it is `NULL'.

   * `READ_LOCKED_BY_COUNT'

     When a thread currently has an `rwlock' locked in shared (read)
     mode, `READ_LOCKED_BY_COUNT' is incremented by 1. This is a
     counter only, so it cannot be used directly to find which thread
     holds a read lock, but it can be used to see whether there is a
     read contention on an `rwlock', and see how many readers are
     currently active.

By performing queries on both of the following tables, a monitoring
application or a DBA may detect some bottlenecks or deadlocks between
threads that involve locks:

   * *Note `events_waits_current': events-waits-current-table, to see
     what `rwlock' a thread is waiting for

   * *Note `rwlock_instances': rwlock-instances-table, to see which
     other thread currently owns an `rwlock'

There is a limitation: The *Note `rwlock_instances':
rwlock-instances-table. can be used only to identify the thread holding
a write lock, but not the threads holding a read lock.


File: manual.info,  Node: performance-schema-waits-tables,  Next: performance-schema-summary-tables,  Prev: performance-schema-instance-tables,  Up: performance-schema-table-descriptions

21.7.4 Performance Schema Wait Event Tables
-------------------------------------------

* Menu:

* events-waits-current-table::   The `events_waits_current' Table
* events-waits-history-table::   The `events_waits_history' Table
* events-waits-history-long-table::  The `events_waits_history_long' Table

These tables store wait events:

   * *Note `events_waits_current': events-waits-current-table.: Current
     wait events

   * *Note `events_waits_history': events-waits-history-table.: The most
     recent wait events for each thread

   * *Note `events_waits_history_long':
     events-waits-history-long-table.: The most recent wait events
     overall


File: manual.info,  Node: events-waits-current-table,  Next: events-waits-history-table,  Prev: performance-schema-waits-tables,  Up: performance-schema-waits-tables

21.7.4.1 The `events_waits_current' Table
.........................................

The *Note `events_waits_current': events-waits-current-table. table
contains current wait events, one row per thread showing the current
status of the thread's most recent monitored wait event.

The *Note `events_waits_current': events-waits-current-table. table can
be truncated with *Note `TRUNCATE TABLE': truncate-table.

Of the tables that contain wait event rows, *Note
`events_waits_current': events-waits-current-table. is the most
fundamental. Other tables that contain wait event rows are logically
derived from the current events. For example, the *Note
`events_waits_history': events-waits-history-table. and *Note
`events_waits_history_long': events-waits-history-long-table. tables
are collections of the most recent wait events, up to a fixed number of
rows.

The *Note `events_waits_current': events-waits-current-table. table has
these columns:

   * `THREAD_ID', `EVENT_ID'

     The thread associated with the event and the thread current event
     number when the event starts. The `THREAD_ID' and `EVENT_ID'
     values taken together form a primary key that uniquely identifies
     the row. No two rows will have the same pair of values.

   * `EVENT_NAME'

     The name of the instrument that produced the event. This is a
     `NAME' value from the *Note `setup_instruments':
     setup-instruments-table. table.  Instrument names have multiple
     parts and form a hierarchy, as discussed in *Note
     performance-schema-instrument-naming::.

   * `SOURCE'

     The name of the source file containing the instrumented code that
     produced the event and the line number in the file at which the
     instrumentation occurs. This enables you to check the source to
     determine exactly what code is involved. For example, if a mutex
     or lock is being blocked, you can check the context in which this
     occurs.

   * `TIMER_START', `TIMER_END', `TIMER_WAIT'

     Timing information for the event. The unit for these values is
     picoseconds (trillionths of a second). The `TIMER_START' and
     `TIMER_END' values indicate when event timing started and ended.
     `TIMER_WAIT' is the event elapsed time (duration).

     If an event has not finished, `TIMER_END' and `TIMER_WAIT' are
     `NULL'.

     If an event is produced from an instrument that has `TIMED = NO',
     timing information is not collected, and `TIMER_START',
     `TIMER_END', and `TIMER_WAIT' are all `NULL'.

     For discussion of picoseconds as the unit for event times and
     factors that affect time values, see *Note
     performance-schema-timing::.

   * `SPINS'

     For a mutex, the number of spin rounds. If the value is `NULL',
     the code does not use spin rounds or spinning is not instrumented.

   * `OBJECT_SCHEMA', `OBJECT_NAME', `OBJECT_TYPE',
     `OBJECT_INSTANCE_BEGIN'

     These columns identify the object `being acted on.' What that
     means depends on the object type.

     For a synchronization object (`cond', `mutex', `rwlock'):

        * `OBJECT_SCHEMA', `OBJECT_NAME', and `OBJECT_TYPE' are `NULL'.

        * `OBJECT_INSTANCE_BEGIN' is the address of the synchronization
          object in memory.

     For a file I/O object:

        * `OBJECT_SCHEMA' is `NULL'.

        * `OBJECT_NAME' is the file name.

        * `OBJECT_TYPE' is `FILE'.

        * `OBJECT_INSTANCE_BEGIN' is an address in memory.

     An `OBJECT_INSTANCE_BEGIN' value itself has no meaning, except
     that different values indicate different objects.
     `OBJECT_INSTANCE_BEGIN' can be used for debugging. For example, it
     can be used with `GROUP BY OBJECT_INSTANCE_BEGIN' to see whether
     the load on 1,000 mutexes (that protect, say, 1,000 pages or blocks
     of data) is spread evenly or just hitting a few bottlenecks. This
     can help you correlate with other sources of information if you
     see the same object address in a log file or another debugging or
     performance tool.

   * `NESTING_EVENT_ID'

     Currently `NULL'.

   * `OPERATION'

     The type of operation performed, such as `lock', `read', or
     `write'.

   * `NUMBER_OF_BYTES'

     The number of bytes read or written by the operation.

   * `FLAGS'

     Reserved for future use.


File: manual.info,  Node: events-waits-history-table,  Next: events-waits-history-long-table,  Prev: events-waits-current-table,  Up: performance-schema-waits-tables

21.7.4.2 The `events_waits_history' Table
.........................................

The *Note `events_waits_history': events-waits-history-table. table
contains the most recent 10 wait events per thread. The table size may
be changed by modifying the
`performance_schema_events_waits_history_size' system variable at
server startup. As new events are added to the table, older events are
discarded if the table is full.  Events are not added to the table
until they have ended.

The *Note `events_waits_history': events-waits-history-table. table has
the same structure as *Note `events_waits_current':
events-waits-current-table. See *Note events-waits-current-table::.

The *Note `events_waits_history': events-waits-history-table. table can
be truncated with *Note `TRUNCATE TABLE': truncate-table.


File: manual.info,  Node: events-waits-history-long-table,  Prev: events-waits-history-table,  Up: performance-schema-waits-tables

21.7.4.3 The `events_waits_history_long' Table
..............................................

The *Note `events_waits_history_long': events-waits-history-long-table.
table contains the most recent 10,000 wait events. The table size may
be changed by modifying the
`performance_schema_events_waits_history_long_size' system variable at
server startup. As new events are added to the table, older events are
discarded if the table is full.  Events are not added to the table
until they have ended.

The *Note `events_waits_history_long': events-waits-history-long-table.
table has the same structure as *Note `events_waits_current':
events-waits-current-table. See *Note events-waits-current-table::.

The *Note `events_waits_history_long': events-waits-history-long-table.
table can be truncated with *Note `TRUNCATE TABLE': truncate-table.


File: manual.info,  Node: performance-schema-summary-tables,  Next: performance-schema-miscellaneous-tables,  Prev: performance-schema-waits-tables,  Up: performance-schema-table-descriptions

21.7.5 Performance Schema Summary Tables
----------------------------------------

* Menu:

* event-wait-summary-tables::    Event Wait Summary Tables
* file-summary-tables::          File I/O Summary Tables

Summary tables provide aggregated information for terminated events
over time. The tables in this group summarize event data in different
ways.

*Event Wait Summaries:*

   * *Note `events_waits_summary_global_by_event_name':
     event-wait-summary-tables.: Wait events summarized per event name

   * *Note `events_waits_summary_by_instance':
     event-wait-summary-tables.: Wait events summarized per instance

   * *Note `events_waits_summary_by_thread_by_event_name':
     event-wait-summary-tables.: Wait events summarized per thread and
     event name

*File I/O Summaries:*

   * *Note `file_summary_by_event_name': file-summary-tables.: File
     events summarized per event name

   * *Note `file_summary_by_instance': file-summary-tables.: File
     events summarized per file instance

The `events_waits_summary_global_by_event_name' table was named
`EVENTS_WAITS_SUMMARY_BY_EVENT_NAME' before MySQL 5.5.7.

Each summary table has grouping columns that determine how to group the
data to be aggregated, and summary columns that contain the aggregated
values. Tables that summarize events in similar ways often have similar
sets of summary columns and differ only in the grouping columns used to
determine how events are aggregated.

Summary tables can be truncated with *Note `TRUNCATE TABLE':
truncate-table. The effect is to reset the summary columns to 0 or
`NULL', not to remove rows. This enables you to clear collected values
and restart aggregation. That might be useful, for example, after you
have made a runtime configuration change.


File: manual.info,  Node: event-wait-summary-tables,  Next: file-summary-tables,  Prev: performance-schema-summary-tables,  Up: performance-schema-summary-tables

21.7.5.1 Event Wait Summary Tables
..................................

The event waits summary tables aggregate general information about
event waits:

   * *Note `events_waits_summary_global_by_event_name':
     event-wait-summary-tables.: Wait events summarized per event name

   * *Note `events_waits_summary_by_instance':
     event-wait-summary-tables.: Wait events summarized per instance

   * *Note `events_waits_summary_by_thread_by_event_name':
     event-wait-summary-tables.: Wait events summarized per thread and
     event name

For example:

     mysql> SELECT * FROM events_waits_summary_global_by_event_name\G
     ...
     *************************** 6. row ***************************
         EVENT_NAME: wait/synch/mutex/sql/BINARY_LOG::LOCK_index
         COUNT_STAR: 8
     SUM_TIMER_WAIT: 2119302
     MIN_TIMER_WAIT: 196092
     AVG_TIMER_WAIT: 264912
     MAX_TIMER_WAIT: 569421
     ...
     *************************** 9. row ***************************
         EVENT_NAME: wait/synch/mutex/sql/hash_filo::lock
         COUNT_STAR: 69
     SUM_TIMER_WAIT: 16848828
     MIN_TIMER_WAIT: 0
     AVG_TIMER_WAIT: 244185
     MAX_TIMER_WAIT: 735345
     ...

*Note `TRUNCATE TABLE': truncate-table. is permitted for wait summary
tables. It resets the counters to zero rather than removing rows.

Each event waits summary table has one or more grouping columns to
indicate how the table aggregates events:

   * *Note `events_waits_summary_global_by_event_name':
     event-wait-summary-tables.  has an `EVENT_NAME' column. Each row
     summarizes events for a given instrument. An instrument might be
     used to create multiple instances of the instrumented object. For
     example, if there is an instrument for a mutex that is created for
     each connection, there are as many instances as there are
     connections. The summary row for the instrument summarizes over
     all these instances.

   * *Note `events_waits_summary_by_instance':
     event-wait-summary-tables.  has `EVENT_NAME' and
     `OBJECT_INSTANCE_BEGIN' columns. Each row summarizes events for a
     given instrument instance. If an instrument is used to create
     multiple instances, each instance has a unique
     `OBJECT_INSTANCE_BEGIN' value, so these instances are summarized
     separately in this table.

   * *Note `events_waits_summary_by_thread_by_event_name':
     event-wait-summary-tables.  has `THREAD_ID' and `EVENT_NAME'
     columns. Each row summarizes events for a given thread and
     instrument.

All event waits summary tables have these summary columns containing
aggregated values:

   * `COUNT_STAR'

     The number of summarized events. This value includes all events,
     whether timed or not.

   * `SUM_TIMER_WAIT'

     The total wait time of the summarized timed events. This value is
     calculated only for timed events because nontimed events have a
     wait time of `NULL'. The same is true for the other
     `XXX_TIMER_WAIT' values.

   * `MIN_TIMER_WAIT'

     The minimum wait time of the summarized timed events.

   * `AVG_TIMER_WAIT'

     The average wait time of the summarized timed events.

   * `MAX_TIMER_WAIT'

     The maximum wait time of the summarized timed events.


File: manual.info,  Node: file-summary-tables,  Prev: event-wait-summary-tables,  Up: performance-schema-summary-tables

21.7.5.2 File I/O Summary Tables
................................

The file I/O summary tables aggregate information about I/O operations:

   * *Note `file_summary_by_event_name': file-summary-tables.: File
     events summarized per event name

   * *Note `file_summary_by_instance': file-summary-tables.: File
     events summarized per file instance

For example:

     mysql> SELECT * FROM file_summary_by_instance\G
     ...
     *************************** 2. row ***************************
                     FILE_NAME: /var/mysql/share/english/errmsg.sys
                    EVENT_NAME: wait/io/file/sql/ERRMSG
                    COUNT_READ: 3
                   COUNT_WRITE: 0
      SUM_NUMBER_OF_BYTES_READ: 42211
     SUM_NUMBER_OF_BYTES_WRITE: 0
     ...
     *************************** 6. row ***************************
                     FILE_NAME: /var/mysql/data/binlog.000001
                    EVENT_NAME: wait/io/file/sql/binlog
                    COUNT_READ: 0
                   COUNT_WRITE: 0
      SUM_NUMBER_OF_BYTES_READ: 0
     SUM_NUMBER_OF_BYTES_WRITE: 0
     ...

*Note `TRUNCATE TABLE': truncate-table. is permitted for file I/O
summary tables. It resets the counters to zero rather than removing
rows.

Each file I/O summary table has one or more grouping columns to
indicate how the table aggregates events:

   * *Note `file_summary_by_event_name': file-summary-tables.  has an
     `EVENT_NAME' column. Each row summarizes events for a given
     instrument.

   * *Note `file_summary_by_instance': file-summary-tables. has
     `FILE_NAME' and `EVENT_NAME' columns. Each row summarizes events
     for a given file instrument instance.

All file I/O summary tables have these summary columns containing
aggregated values:

   * `COUNT_READ'

     The number of read operations in the summarized events.

   * `COUNT_WRITE'

     The number of write operations in the summarized events.

   * `SUM_NUMBER_OF_BYTES_READ'

     The number of bytes read in the summarized events.

   * `SUM_NUMBER_OF_BYTES_WRITE'

     The number of bytes written in the summarized events.

The MySQL server uses several techniques to avoid I/O operations by
caching information read from files, so it is possible that statements
you might expect to result in I/O events will not. You may be able to
ensure that I/O does occur by flushing caches or restarting the server
to reset its state.


File: manual.info,  Node: performance-schema-miscellaneous-tables,  Prev: performance-schema-summary-tables,  Up: performance-schema-table-descriptions

21.7.6 Performance Schema Miscellaneous Tables
----------------------------------------------

* Menu:

* performance-timers-table::     The `performance_timers' Table
* threads-table::                The `threads' Table

The following sections describe tables that do not fall into the table
categories discussed in the preceding sections:

   * *Note `performance_timers': performance-timers-table.: Which event
     timers are available

   * *Note `threads': threads-table.: Information about server threads


File: manual.info,  Node: performance-timers-table,  Next: threads-table,  Prev: performance-schema-miscellaneous-tables,  Up: performance-schema-miscellaneous-tables

21.7.6.1 The `performance_timers' Table
.......................................

The *Note `performance_timers': performance-timers-table. table shows
which event timers are available:

     mysql> SELECT * FROM performance_timers;
     +-------------+-----------------+------------------+----------------+
     | TIMER_NAME  | TIMER_FREQUENCY | TIMER_RESOLUTION | TIMER_OVERHEAD |
     +-------------+-----------------+------------------+----------------+
     | CYCLE       |      2389029850 |                1 |             72 |
     | NANOSECOND  |            NULL |             NULL |           NULL |
     | MICROSECOND |         1000000 |                1 |            585 |
     | MILLISECOND |            1035 |                1 |            738 |
     | TICK        |             101 |                1 |            630 |
     +-------------+-----------------+------------------+----------------+

If the values associated with a given timer name are `NULL', that timer
is not supported on your platform. The rows that do not contain `NULL'
indicate which timers you can use in *Note `setup_timers':
setup-timers-table.

The *Note `performance_timers': performance-timers-table. table has
these columns:

   * `TIMER_NAME'

     The name by which to refer to the timer when configuring the *Note
     `setup_timers': setup-timers-table. table.

   * `TIMER_FREQUENCY'

     The number of timer units per second. For a cycle timer, the
     frequency is generally related to the CPU speed. For example, on a
     system with a 2.4GHz processor, the `CYCLE' may be close to
     2400000000.

   * `TIMER_RESOLUTION'

     Indicates the number of timer units by which timer values
     increase. If a timer has a resolution of 10, its value increases
     by 10 each time.

   * `TIMER_OVERHEAD'

     The minimal number of cycles of overhead to obtain one timing with
     the given timer. The Performance Schema determines this value by
     invoking the timer 20 times during initialization and picking the
     smallest value. The total overhead really is twice this amount
     because the instrumentation invokes the timer at the start and end
     of each event. The timer code is called only for timed events, so
     this overhead does not apply for nontimed events.


File: manual.info,  Node: threads-table,  Prev: performance-timers-table,  Up: performance-schema-miscellaneous-tables

21.7.6.2 The `threads' Table
............................

The *Note `threads': threads-table. table contains a row for each
server thread:

     mysql> SELECT * FROM threads;
     +-----------+----------------+----------------------------------------+
     | THREAD_ID | PROCESSLIST_ID | NAME                                   |
     +-----------+----------------+----------------------------------------+
     |         0 |              0 | thread/sql/main                        |
     |         1 |              0 | thread/innodb/io_handler_thread        |
     |        16 |              0 | thread/sql/signal_handler              |
     |        23 |              7 | thread/sql/one_connection              |
     |         5 |              0 | thread/innodb/io_handler_thread        |
     |        12 |              0 | thread/innodb/srv_lock_timeout_thread  |
     |        22 |              6 | thread/sql/one_connection              |
     ...

If you have the `PROCESS' privilege, you can see all threads.
Otherwise, you can see only your own threads (that is, threads
associated with the MySQL account that you are using).

The *Note `threads': threads-table. table has these columns:

   * `THREAD_ID'

     This is the unique identifier of an instrumented thread.

   * `PROCESSLIST_ID'

     For threads that are displayed in *Note
     `INFORMATION_SCHEMA.PROCESSLIST': processlist-table, this is the
     `INFORMATION_SCHEMA.ID' value, which is also the value that
     `CONNECTION_ID()' would return within that thread. For background
     threads (threads not associated with a user connection),
     `PROCESSLIST_ID' is 0, so the values are not unique.

     This column was named `ID' before MySQL 5.5.8.

   * `NAME'

     `NAME' is the name associated with the instrumentation of the code
     in the server. For example, `thread/sql/one_connection' corresponds
     to the thread function in the code responsible for handling a user
     connection, and `thread/sql/main' stands for the `main()' function
     of the server.

The *Note `threads': threads-table. table was named `PROCESSLIST'
before MySQL 5.5.6.


File: manual.info,  Node: performance-schema-option-variable-reference,  Next: performance-schema-system-variables,  Prev: performance-schema-table-descriptions,  Up: performance-schema

21.8 Performance Schema Option and Variable Reference
=====================================================

*Performance Schema Variable Reference*

Name           Cmd-Line    Option file System Var  Status Var  Var Scope   Dynamic
performance_schemaYes         Yes         Yes                     Global      No
Performance_schema_cond_classes_lost                                    Yes         Global      No
Performance_schema_cond_instances_lost                                    Yes         Global      No
performance_schema_events_waits_history_long_sizeYes         Yes         Yes                     Global      No
performance_schema_events_waits_history_sizeYes         Yes         Yes                     Global      No
Performance_schema_file_classes_lost                                    Yes         Global      No
Performance_schema_file_handles_lost                                    Yes         Global      No
Performance_schema_file_instances_lost                                    Yes         Global      No
Performance_schema_locker_lost                                    Yes         Global      No
performance_schema_max_cond_classesYes         Yes         Yes                     Global      No
performance_schema_max_cond_instancesYes         Yes         Yes                     Global      No
performance_schema_max_file_classesYes         Yes         Yes                     Global      No
performance_schema_max_file_handlesYes         Yes         Yes                     Global      No
performance_schema_max_file_instancesYes         Yes         Yes                     Global      No
performance_schema_max_mutex_classesYes         Yes         Yes                     Global      No
performance_schema_max_mutex_instancesYes         Yes         Yes                     Global      No
performance_schema_max_rwlock_classesYes         Yes         Yes                     Global      No
performance_schema_max_rwlock_instancesYes         Yes         Yes                     Global      No
performance_schema_max_table_handlesYes         Yes         Yes                     Global      No
performance_schema_max_table_instancesYes         Yes         Yes                     Global      No
performance_schema_max_thread_classesYes         Yes         Yes                     Global      No
performance_schema_max_thread_instancesYes         Yes         Yes                     Global      No
Performance_schema_mutex_classes_lost                                    Yes         Global      No
Performance_schema_mutex_instances_lost                                    Yes         Global      No
Performance_schema_rwlock_classes_lost                                    Yes         Global      No
Performance_schema_rwlock_instances_lost                                    Yes         Global      No
Performance_schema_table_handles_lost                                    Yes         Global      No
Performance_schema_table_instances_lost                                    Yes         Global      No
Performance_schema_thread_classes_lost                                    Yes         Global      No
Performance_schema_thread_instances_lost                                    Yes         Global      No


File: manual.info,  Node: performance-schema-system-variables,  Next: performance-schema-status-variables,  Prev: performance-schema-option-variable-reference,  Up: performance-schema

21.9 Performance Schema System Variables
========================================

The Performance Schema implements several system variables that provide
configuration information:

     mysql> SHOW VARIABLES LIKE 'perf%';
     +---------------------------------------------------+---------+
     | Variable_name                                     | Value   |
     +---------------------------------------------------+---------+
     | performance_schema                                | ON      |
     | performance_schema_events_waits_history_long_size | 10000   |
     | performance_schema_events_waits_history_size      | 10      |
     | performance_schema_max_cond_classes               | 80      |
     | performance_schema_max_cond_instances             | 1000    |
     | performance_schema_max_file_classes               | 50      |
     | performance_schema_max_file_handles               | 32768   |
     | performance_schema_max_file_instances             | 10000   |
     | performance_schema_max_mutex_classes              | 200     |
     | performance_schema_max_mutex_instances            | 1000000 |
     | performance_schema_max_rwlock_classes             | 30      |
     | performance_schema_max_rwlock_instances           | 1000000 |
     | performance_schema_max_table_handles              | 100000  |
     | performance_schema_max_table_instances            | 50000   |
     | performance_schema_max_thread_classes             | 50      |
     | performance_schema_max_thread_instances           | 1000    |
     +---------------------------------------------------+---------+

Performance Schema system variables can be set at server startup on the
command line or in option files, and many can be set at runtime. See
*Note performance-schema-option-variable-reference::.

Performance Schema system variables have the following meanings:

   *  `performance_schema'

     Options for performance_schema

     *Introduced*         5.5.3           
     *Command-Line        `--performance_schema=#'        
     Format*                              
     *Option-File Format* `performance_schema'        
     *System Variable     `performance_schema'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `boolean'        
     *Default*            `OFF'           

     The value of this variable is `ON' or `OFF' to indicate whether
     the Performance Schema is enabled. By default, the value is `OFF'.
     At server startup, you can specify this variable with no value or
     a value of 1 to enable it, or with a value of 0 to disable it.

   *  `performance_schema_events_waits_history_long_size'

     Options for performance_schema_events_waits_history_long_size

     *Introduced*         5.5.3           
     *Command-Line        `--performance_schema_events_waits_history_long_size=#'        
     Format*                              
     *Option-File Format* `performance_schema_events_waits_history_long_size'        
     *System Variable     `performance_schema_events_waits_history_long_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `10000'         

     The number of rows in the *Note `events_waits_history_long':
     events-waits-history-long-table. table.

   *  `performance_schema_events_waits_history_size'

     Options for performance_schema_events_waits_history_size

     *Introduced*         5.5.3           
     *Command-Line        `--performance_schema_events_waits_history_size=#'        
     Format*                              
     *Option-File Format* `performance_schema_events_waits_history_size'        
     *System Variable     `performance_schema_events_waits_history_size'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `10'            

     The number of rows per thread in the *Note `events_waits_history':
     events-waits-history-table. table.

   *  `performance_schema_max_cond_classes'

     Options for performance_schema_max_cond_classes

     *Introduced*         5.5.3           
     *Command-Line        `--performance_schema_max_cond_classes=#'        
     Format*                              
     *Option-File Format* `performance_schema_max_cond_classes'        
     *System Variable     `performance_schema_max_cond_classes'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `80'            

     The maximum number of condition instruments.

   *  `performance_schema_max_cond_instances'

     Options for performance_schema_max_cond_instances

     *Introduced*         5.5.3           
     *Command-Line        `--performance_schema_max_cond_instances=#'        
     Format*                              
     *Option-File Format* `performance_schema_max_cond_instances'        
     *System Variable     `performance_schema_max_cond_instances'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1000'          

     The maximum number of instrumented condition objects.

   *  `performance_schema_max_file_classes'

     Options for performance_schema_max_file_classes

     *Introduced*         5.5.3           
     *Command-Line        `--performance_schema_max_file_classes=#'        
     Format*                              
     *Option-File Format* `performance_schema_max_file_classes'        
     *System Variable     `performance_schema_max_file_classes'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `50'            

     The maximum number of file instruments.

   *  `performance_schema_max_file_handles'

     Options for performance_schema_max_file_handles

     *Introduced*         5.5.3           
     *Command-Line        `--performance_schema_max_file_handles=#'        
     Format*                              
     *Option-File Format* `performance_schema_max_file_handles'        
     *System Variable     `performance_schema_max_file_handles'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `32768'         

     The maximum number of opened file objects.

     The value of `performance_schema_max_file_handles' should be
     greater than the value of `open_files_limit': `open_files_limit'
     affects the maximum number of open file handles the server can
     support and `performance_schema_max_file_handles' affects how many
     of these file handles can be instrumented.

   *  `performance_schema_max_file_instances'

     Options for performance_schema_max_file_instances

     *Introduced*         5.5.3           
     *Command-Line        `--performance_schema_max_file_instances=#'        
     Format*                              
     *Option-File Format* `performance_schema_max_file_instances'        
     *System Variable     `performance_schema_max_file_instances'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `10000'         

     The maximum number of instrumented file objects.

   *  `performance_schema_max_mutex_classes'

     Options for performance_schema_max_mutex_classes

     *Introduced*         5.5.3           
     *Command-Line        `--performance_schema_max_mutex_classes=#'        
     Format*                              
     *Option-File Format* `performance_schema_max_mutex_classes'        
     *System Variable     `performance_schema_max_mutex_classes'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `200'           

     The maximum number of mutex instruments.

   *  `performance_schema_max_mutex_instances'

     Options for performance_schema_max_mutex_instances

     *Introduced*         5.5.3           
     *Command-Line        `--performance_schema_max_mutex_instances=#'        
     Format*                              
     *Option-File Format* `performance_schema_max_mutex_instances'        
     *System Variable     `performance_schema_max_mutex_instances'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1000'          

     The maximum number of instrumented mutex objects.

   *  `performance_schema_max_rwlock_classes'

     Options for performance_schema_max_rwlock_classes

     *Introduced*         5.5.3           
     *Command-Line        `--performance_schema_max_rwlock_classes=#'        
     Format*                              
     *Option-File Format* `performance_schema_max_rwlock_classes'        
     *System Variable     `performance_schema_max_rwlock_classes'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `20'            

     The maximum number of rwlock instruments.

   *  `performance_schema_max_rwlock_instances'

     Options for performance_schema_max_rwlock_instances

     *Introduced*         5.5.3           
     *Command-Line        `--performance_schema_max_rwlock_instances=#'        
     Format*                              
     *Option-File Format* `performance_schema_max_rwlock_instances'        
     *System Variable     `performance_schema_max_rwlock_instances'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1000'          

     The maximum number of instrumented rwlock objects.

   *  `performance_schema_max_table_handles'

     Options for performance_schema_max_table_handles

     *Introduced*         5.5.3           
     *Command-Line        `--performance_schema_max_table_handles=#'        
     Format*                              
     *Option-File Format* `performance_schema_max_table_handles'        
     *System Variable     `performance_schema_max_table_handles'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `100000'        

     The maximum number of opened table objects.

   *  `performance_schema_max_table_instances'

     Options for performance_schema_max_table_instances

     *Introduced*         5.5.3           
     *Command-Line        `--performance_schema_max_table_instances=#'        
     Format*                              
     *Option-File Format* `performance_schema_max_table_instances'        
     *System Variable     `performance_schema_max_table_instances'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `50000'         

     The maximum number of instrumented table objects.

   *  `performance_schema_max_thread_classes'

     Options for performance_schema_max_thread_classes

     *Introduced*         5.5.3           
     *Command-Line        `--performance_schema_max_thread_classes=#'        
     Format*                              
     *Option-File Format* `performance_schema_max_thread_classes'        
     *System Variable     `performance_schema_max_thread_classes'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `50'            

     The maximum number of thread instruments.

   *  `performance_schema_max_thread_instances'

     Options for performance_schema_max_thread_instances

     *Introduced*         5.5.3           
     *Command-Line        `--performance_schema_max_thread_instances=#'        
     Format*                              
     *Option-File Format* `performance_schema_max_thread_instances'        
     *System Variable     `performance_schema_max_thread_instances'        
     Name*                                
     *Variable Scope*     Global          
     *Dynamic Variable*   No              
                          *Permitted        
                          Values*         
     *Type*               `numeric'        
     *Default*            `1000'          

     The maximum number of instrumented thread objects.

     The `max_connections' and `max_delayed_threads' system variables
     affect how many threads are run in the server.
     `performance_schema_max_thread_instances' affects how many of
     these running threads can be instrumented.  If you increase
     `max_connections' or `max_delayed_threads', you should consider
     increasing `performance_schema_max_thread_instances' so that
     `performance_schema_max_thread_instances' is greater than the sum
     of `max_connections' and `max_delayed_threads'.


File: manual.info,  Node: performance-schema-status-variables,  Next: performance-schema-and-plugins,  Prev: performance-schema-system-variables,  Up: performance-schema

21.10 Performance Schema Status Variables
=========================================

The Performance Schema implements several status variables that provide
information about instrumentation that could not be loaded or created
due to memory constraints:

     mysql> SHOW STATUS LIKE 'perf%';
     +------------------------------------------+-------+
     | Variable_name                            | Value |
     +------------------------------------------+-------+
     | Performance_schema_cond_classes_lost     | 0     |
     | Performance_schema_cond_instances_lost   | 0     |
     | Performance_schema_file_classes_lost     | 0     |
     | Performance_schema_file_handles_lost     | 0     |
     | Performance_schema_file_instances_lost   | 0     |
     | Performance_schema_locker_lost           | 0     |
     | Performance_schema_mutex_classes_lost    | 0     |
     | Performance_schema_mutex_instances_lost  | 0     |
     | Performance_schema_rwlock_classes_lost   | 0     |
     | Performance_schema_rwlock_instances_lost | 0     |
     | Performance_schema_table_handles_lost    | 0     |
     | Performance_schema_table_instances_lost  | 0     |
     | Performance_schema_thread_classes_lost   | 0     |
     | Performance_schema_thread_instances_lost | 0     |
     +------------------------------------------+-------+

Performance Schema status variables have the following meanings:

   *  `Performance_schema_cond_classes_lost'

     How many condition instruments could not be loaded.

   *  `Performance_schema_cond_instances_lost'

     How many condition instrument instances could not be created.

   *  `Performance_schema_file_classes_lost'

     How many file instruments could not be loaded.

   *  `Performance_schema_file_handles_lost'

     How many file instrument instances could not be opened.

   *  `Performance_schema_file_instances_lost'

     How many file instrument instances could not be created.

   *  `Performance_schema_locker_lost'

     How many events are `lost' or not recorded, due to the following
     conditions:

        * Events are recursive (for example, waiting for A caused a
          wait on B, which caused a wait on C).

        * The depth of the nested events stack is greater than the
          limit imposed by the implementation.

     Currently, events recorded by the Performance Schema are not
     recursive, so this variable should always be 0.

   *  `Performance_schema_mutex_classes_lost'

     How many mutex instruments could not be loaded.

   *  `Performance_schema_mutex_instances_lost'

     How many mutex instrument instances could not be created.

   *  `Performance_schema_rwlock_classes_lost'

     How many rwlock instruments could not be loaded.

   *  `Performance_schema_rwlock_instances_lost'

     How many rwlock instrument instances could not be created.

   *  `Performance_schema_table_handles_lost'

     How many table instrument instances could not be opened.

   *  `Performance_schema_table_instances_lost'

     How many table instrument instances could not be created.

   *  `Performance_schema_thread_classes_lost'

     How many thread instruments could not be loaded.

   *  `Performance_schema_thread_instances_lost'

     How many thread instrument instances could not be created.

For information on using these variables to check Performance Schema
status, see *Note performance-schema-status-monitoring::.


File: manual.info,  Node: performance-schema-and-plugins,  Next: performance-schema-examples,  Prev: performance-schema-status-variables,  Up: performance-schema

21.11 Performance Schema and Plugins
====================================

Removing a plugin with *Note `UNINSTALL PLUGIN': uninstall-plugin. does
not affect information already collected for code in that plugin. Time
spent executing the code while the plugin was loaded was still spent
even if the plugin is unloaded later. The associated event information,
including aggregate information, remains readable in
`performance_schema' database tables. For additional information about
the effect of plugin installation and removal, see *Note
performance-schema-status-monitoring::.

A plugin implementor who instruments plugin code should document its
instrumentation characteristics to enable those who load the plugin to
account for its requirements. For example, a third-party storage engine
should include in its documentation how much memory the engine needs
for mutex and other instruments.


File: manual.info,  Node: performance-schema-examples,  Prev: performance-schema-and-plugins,  Up: performance-schema

21.12 Using the Performance Schema to Diagnose Problems
=======================================================

The Performance Schema is a tool to help a DBA do performance tuning by
taking real measurements instead of `wild guesses.' This section
demonstrates some ways to use the Performance Schema for this purpose.
The discussion here relies on the use of event filtering, which is
described in *Note performance-schema-filtering::.

The following example provides one methodology that you can use to
analyze a repeatable problem, such as investigating a performance
bottleneck. To begin, you should have a repeatable use case where
performance is deemed `too slow' and needs optimization, and you should
enable all instrumentation (no pre-filtering at all).

  1. Run the use case.

  2. Using the Performance Schema tables, analyze the root cause of the
     performance problem. This analysis will rely heavily on
     post-filtering.

  3. For problem areas that are ruled out, disable the corresponding
     instruments. For example, if analysis shows that the issue is not
     related to file I/O in a particular storage engine, disable the
     file I/O instruments for that engine. Then truncate the history
     and summary tables to remove previously collected events.

  4. Repeat the process at step 1.

     At each iteration, the Performance Schema output, particularly the
     *Note `events_waits_history_long': events-waits-history-long-table.
     table, will contain less and less `noise' caused by nonsignificant
     instruments, and given that this table has a fixed size, will
     contain more and more data relevant to the analysis of the problem
     at hand.

     At each iteration, investigation should lead closer and closer to
     the root cause of the problem, as the `signal/noise' ratio will
     improve, making analysis easier.

  5. Once a root cause of performance bottleneck is identified, take
     the appropriate corrective action, such as:

        * Tune the server parameters (cache sizes, memory, and so
          forth).

        * Tune a query by writing it differently,

        * Tune the database schema (tables, indexes, and so forth).

        * Tune the code (this applies to storage engine or server
          developers only).

  6. Start again at step 1, to see the effects of the changes on
     performance.

The `mutex_instances.LOCKED_BY_THREAD_ID' and
`rwlock_instances.WRITE_LOCKED_BY_THREAD_ID' columns are extremely
important for investigating performance bottlenecks or deadlocks. This
is made possible by Performance Schema instrumentation as follows:

  1. Suppose that thread 1 is stuck waiting for a mutex.

  2. You can determine what the thread is waiting for:

          SELECT * FROM events_waits_current WHERE THREAD_ID = THREAD_1;

     Say the query result identifies that the thread is waiting for
     mutex A, found in `events_waits_current.OBJECT_INSTANCE_BEGIN'.

  3. You can determine which thread is holding mutex A:

          SELECT * FROM mutex_instances WHERE OBJECT_INSTANCE_BEGIN = MUTEX_A;

     Say the query result identifies that it is thread 2 holding mutex
     A, as found in `mutex_instances.LOCKED_BY_THREAD_ID'.

  4. You can see what thread 2 is doing:

          SELECT * FROM events_waits_current WHERE THREAD_ID = THREAD_2;


File: manual.info,  Node: connectors-apis,  Next: extending-mysql,  Prev: performance-schema,  Up: Top

22 Connectors and APIs
**********************

* Menu:

* connector-odbc::               MySQL Connector/ODBC
* connector-net::                MySQL Connector/Net
* connector-j::                  MySQL Connector/J
* connector-cpp::                MySQL Connector/C++
* connector-c::                  MySQL Connector/C
* connector-python::             MySQL Connector/Python
* libmysqld::                    libmysqld, the Embedded MySQL Server Library
* c-api::                        MySQL C API
* apis-php::                     MySQL PHP API
* apis-perl::                    MySQL Perl API
* apis-python::                  MySQL Python API
* apis-ruby::                    MySQL Ruby APIs
* apis-tcl::                     MySQL Tcl API
* apis-eiffel::                  MySQL Eiffel Wrapper

MySQL Connectors provide connectivity to the MySQL server for client
programs. APIs provide low-level access to the MySQL protocol and MySQL
resources. Both Connectors and the APIs enable you to connect and
execute MySQL statements from another language or environment,
including ODBC, Java (JDBC), Perl, Python, PHP, Ruby, and native C and
embedded MySQL instances.

*Note*:

Connector version numbers do not correlate with MySQL Server version
numbers. See *Note connectors-apis-versions::.

* MySQL Connectors *

Oracle develops a number of connectors:

   * *Note Connector/ODBC: connector-odbc. provides driver support for
     connecting to MySQL using the Open Database Connectivity (ODBC)
     API. Support is available for ODBC connectivity from Windows,
     Unix, and Mac OS X platforms.

   * *Note Connector/Net: connector-net. enables developers to create
     .NET applications that connect to MySQL.  Connector/Net implements
     a fully functional ADO.NET interface and provides support for use
     with ADO.NET aware tools.  Applications that use Connector/Net can
     be written in any supported .NET language.

     The MySQL *Note Visual Studio Plugin: connector-net-visual-studio.
     works with Connector/Net and Visual Studio 2005. The plugin is a
     MySQL DDEX Provider, which means that you can use the schema and
     data manipulation tools available in Visual Studio to create and
     edit objects within a MySQL database.

   * *Note Connector/J: connector-j. provides driver support for
     connecting to MySQL from Java applications using the standard Java
     Database Connectivity (JDBC) API.

   * *Note Connector/Python: connector-python.  provides driver support
     for connecting to MySQL from Python applications using an API that
     is compliant with the Python DB API version 2.0
     (http://www.python.org/dev/peps/pep-0249/). No additional Python
     modules or MySQL client libraries are required.

   * *Note Connector/C++: connector-cpp. enables C++ applications to
     connect to MySQL.

   * *Note Connector/C: connector-c. is a standalone replacement for
     the MySQL Client Library (`libmysqlclient'), to be used for C
     applications.

* The MySQL C API *

For direct access to using MySQL natively within a C application, there
are two methods:

   * The *Note C API: c-api. provides low-level access to the MySQL
     client/server protocol through the `libmysqlclient' client
     library. This is the primary method used to connect to an instance
     of the MySQL server, and is used both by MySQL command-line
     clients and many of the MySQL Connectors and third-party APIs
     detailed here.

     `libmysqlclient' is included in MySQL distributions and in MySQL
     Connector/C distributions.

   * `libmysqld' is an embedded MySQL server library that enables you
     to embed an instance of the MySQL server into your C applications.

     `libmysqld' is included in MySQL distributions, but not in MySQL
     Connector/C distributions.

See also *Note c-api-implementations::.

To access MySQL from a C application, or to build an interface to MySQL
for a language not supported by the Connectors or APIs in this chapter,
the *Note C API: c-api. is where to start. A number of programmer's
utilities are available to help with the process; see *Note
programs-development::.

* Third-Party MySQL APIs *

The remaining APIs described in this chapter provide an interface to
MySQL from specific application languages. These third-party solutions
are not developed or supported by Oracle. Basic information on their
usage and abilities is provided here for reference purposes only.

All the third-party language APIs are developed using one of two
methods, using `libmysqlclient' or by implementing a _native driver_.
The two solutions offer different benefits:

   * Using _`libmysqlclient'_ offers complete compatibility with MySQL
     because it uses the same libraries as the MySQL client
     applications. However, the feature set is limited to the
     implementation and interfaces exposed through `libmysqlclient' and
     the performance may be lower as data is copied between the native
     language, and the MySQL API components.

   * _Native drivers_ are an implementation of the MySQL network
     protocol entirely within the host language or environment. Native
     drivers are fast, as there is less copying of data between
     components, and they can offer advanced functionality not
     available through the standard MySQL API.  Native drivers are also
     easier for end users to build and deploy because no copy of the
     MySQL client libraries is needed to build the native driver
     components.

*Note connectors-apis-summary:: lists many of the libraries and
interfaces available for MySQL.  *Note connectors-apis-versions:: shows
which MySQL Server versions each connector supports.

*MySQL APIs and Interfaces*

EnvironmentAPI                       Type        Notes
Ada     GNU Ada MySQL Bindings    `libmysqlclient'See MySQL Bindings for GNU
                                              Ada
                                              (http://gnade.sourceforge.net/)
C       C API                     `libmysqlclient'See *Note c-api::.
C       Connector/C               Replacement See *Note connector-c::.
                                  for         
                                  `libmysqlclient'
C++     Connector/C++             `libmysqlclient'See *Note connector-cpp::.
        MySQL++                   `libmysqlclient'See MySQL++ Web site
                                              (http://tangentsoft.net/mysql++/doc/).
        MySQL wrapped             `libmysqlclient'See MySQL wrapped
                                              (http://www.alhem.net/project/mysql/).
Cocoa   MySQL-Cocoa               `libmysqlclient'Compatible with the
                                              Objective-C Cocoa
                                              environment. See
                                              `http://mysql-cocoa.sourceforge.net/'
D       MySQL for D               `libmysqlclient'See MySQL for D
                                              (http://www.steinmole.de/d/).
Eiffel  Eiffel MySQL              `libmysqlclient'See *Note apis-eiffel::.
Erlang  `erlang-mysql-driver'     `libmysqlclient'See `erlang-mysql-driver'.
                                              (http://code.google.com/p/erlang-mysql-driver/)
Haskell Haskell MySQL Bindings    Native      See Brian O'Sullivan's pure
                                  Driver      Haskell MySQL bindings
                                              (http://www.serpentine.com/software/mysql).
        `hsql-mysql'              `libmysqlclient'See MySQL driver for Haskell
                                              (http://hackage.haskell.org/cgi-bin/hackage-scripts/package/hsql-mysql-1.7).
Java/JDBCConnector/J               Native      See *Note connector-j::.
                                  Driver      
Kaya    MyDB                      `libmysqlclient'See MyDB
                                              (http://kayalang.org/library/latest/MyDB).
Lua     LuaSQL                    `libmysqlclient'See LuaSQL
                                              (http://www.keplerproject.org/luasql/).
.NET/MonoConnector/Net             Native      See *Note connector-net::.
                                  Driver      
ObjectiveOBjective Caml MySQL      `libmysqlclient'See MySQL Bindings for
Caml    Bindings                              Objective Caml
                                              (http://raevnos.pennmush.org/code/ocaml-mysql/).
Octave  Database bindings for     `libmysqlclient'See Database bindings for
        GNU Octave                            GNU Octave
                                              (http://octave.sourceforge.net/database/index.html).
ODBC    Connector/ODBC            `libmysqlclient'See *Note connector-odbc::.
Perl    `DBI'/`DBD::mysql'        `libmysqlclient'See *Note apis-perl::.
        `Net::MySQL'              Native      See `Net::MySQL'
                                  Driver      (http://search.cpan.org/dist/Net-MySQL/MySQL.pm)
                                              at CPAN
PHP     `mysql', `ext/mysql'      `libmysqlclient'See See section
        interface (deprecated)                "apis-php-mysql" in the
                                              online manual.
        `mysqli', `ext/mysqli'    `libmysqlclient'See See section
        interface                             "apis-php-mysqli" in the
                                              online manual.
        `PDO_MYSQL'               `libmysqlclient'See See section
                                              "apis-php-ref.pdo-mysql" in
                                              the online manual.
        PDO mysqlnd               Native      
                                  Driver      
Python  Connector/Python          Native      See *Note connector-python::.
                                  Driver      
        MySQLdb                   `libmysqlclient'See *Note apis-python::.
Ruby    MySQL/Ruby                `libmysqlclient'Uses `libmysqlclient'. See
                                              *Note apis-ruby-mysqlruby::.
        Ruby/MySQL                Native      See *Note
                                  Driver      apis-ruby-rubymysql::.
Scheme  `Myscsh'                  `libmysqlclient'See `Myscsh'
                                              (http://www-pu.informatik.uni-tuebingen.de/users/knauel/myscsh/).
SPL     `sql_mysql'               `libmysqlclient'See `sql_mysql' for SPL
                                              (http://www.clifford.at/spl/spldoc/sql_mysql.html).
Tcl     MySQLtcl                  `libmysqlclient'See *Note apis-tcl::.

*MySQL Connector Versions and MySQL Server Versions*

Connector                            Connector version  MySQL Server
                                                        version
Connector/C                          6.1.0 GA           5.6, 5.5, 5.1,
                                                        5.0, 4.1
Connector/C++                        1.0.5 GA           5.6, 5.5, 5.1
Connector/J                          5.1.8              5.6, 5.5, 5.1,
                                                        5.0, 4.1
Connector/Net                        6.5                5.6, 5.5, 5.1, 5.0
Connector/Net                        6.4                5.6, 5.5, 5.1, 5.0
Connector/Net                        6.3                5.6, 5.5, 5.1, 5.0
Connector/Net                        6.2 (No longer     5.6, 5.5, 5.1, 5.0
                                     supported)         
Connector/Net                        6.1 (No longer     5.6, 5.5, 5.1, 5.0
                                     supported)         
Connector/Net                        6.0 (No longer     5.6, 5.5, 5.1, 5.0
                                     supported)         
Connector/Net                        5.2 (No longer     5.6, 5.5, 5.1, 5.0
                                     supported)         
Connector/Net                        1.0 (No longer     5.0, 4.0
                                     supported)         
Connector/ODBC                       5.1                5.6, 5.5, 5.1,
                                                        5.0, 4.1.1+
Connector/ODBC                       3.51 (Unicode not  5.6, 5.5, 5.1,
                                     supported)         5.0, 4.1


File: manual.info,  Node: connector-odbc,  Next: connector-net,  Prev: connectors-apis,  Up: connectors-apis

22.1 MySQL Connector/ODBC
=========================

* Menu:

* connector-odbc-versions::      Connector/ODBC Versions
* connector-odbc-introduction::  Connector/ODBC Introduction
* connector-odbc-installation::  Connector/ODBC Installation
* connector-odbc-configuration::  Configuring Connector/ODBC
* connector-odbc-examples::      Connector/ODBC Examples
* connector-odbc-reference::     Connector/ODBC Reference
* connector-odbc-usagenotes::    Connector/ODBC Notes and Tips
* connector-odbc-support::       Connector/ODBC Support

The MySQL Connector/ODBC is the name for the family of MySQL ODBC
drivers (previously called MyODBC drivers) that provide access to a
MySQL database using the industry standard Open Database Connectivity
(ODBC) API. This reference covers Connector/ODBC 5.2, which includes
the functionality of the Unicode driver and the ANSI driver, which
formerly were split between Connector/ODBC 5.1 and Connector/ODBC 3.51.

MySQL Connector/ODBC provides both driver-manager based and native
interfaces to the MySQL database, with full support for MySQL
functionality, including stored procedures, transactions and, with
Connector/ODBC 5.1 and higher, full Unicode compliance.

For more information on the ODBC API standard and how to use it, refer
to `http://support.microsoft.com/kb/110093'.

The application development section of the ODBC API reference assumes a
good working knowledge of C, general DBMS, and a familiarity with
MySQL. For more information about MySQL functionality and its syntax,
refer to `http://dev.mysql.com/doc/'.

Typically, you need to install Connector/ODBC only on Windows machines.
For Unix and Mac OS X, you can use the native MySQL network or named
pipes to communicate with your MySQL database. You may need
Connector/ODBC for Unix or Mac OS X if you have an application that
requires an ODBC interface to communicate with the database.
Applications that require ODBC to communicate with MySQL include
ColdFusion, Microsoft Office, and Filemaker Pro.

For release notes detailing the changes in each release of
Connector/ODBC, see MySQL Connector/ODBC Release Notes
(http://dev.mysql.com/doc/relnotes/connector-odbc/en/).

* Key connector/ODBC topics include: *

   * Installing Connector/ODBC: *Note connector-odbc-installation::.

   * The configuration options: *Note
     connector-odbc-configuration-connection-parameters::.

   * An example that connects to a MySQL database from a Windows host:
     *Note connector-odbc-examples-walkthrough::.

   * An example that uses Microsoft Access as an interface to a MySQL
     database: *Note connector-odbc-examples-tools-with-access::.

   * General tips and notes, including how to obtain the last
     auto-increment ID: *Note connector-odbc-usagenotes-functionality::.

   * Application-specific usage tips and notes: *Note
     connector-odbc-usagenotes-apptips::.

   * A FAQ (Frequently Asked Questions) list: *Note
     connector-odbc-errors::.

   * Additional Connector/ODBC support options: *Note
     connector-odbc-support::.


File: manual.info,  Node: connector-odbc-versions,  Next: connector-odbc-introduction,  Prev: connector-odbc,  Up: connector-odbc

22.1.1 Connector/ODBC Versions
------------------------------

These are the versions of Connector/ODBC that are currently available:

   * Connector/ODBC 5.2, currently in GA status, upgrades the ANSI
     driver of Connector/ODBC 3.51 to the 5.x code base. It also
     includes new features, such as enabling server-side prepared
     statements by default. At installation time, you can choose the
     Unicode driver for the broadest compatibility with data sources
     using various character sets, or the ANSI driver for optimal
     performance with a more limited range of character sets. It works
     with MySQL versions 4.1.1 and higher.

   * Connector/ODBC 5.1, now superseded by 5.2, is a partial rewrite of
     the of the 3.51 code base, and is designed to work with MySQL
     versions 4.1.1 and newer.

     Connector/ODBC 5.1 also includes the following changes and
     improvements over the 3.51 release:

        * Improved support on Windows 64-bit platforms.

        * Full Unicode support at the driver level. This includes
          support for the `SQL_WCHAR' data type, and support for
          Unicode login, password and DSN configurations. For more
          information, see Microsoft Knowledgebase Article #716246
          (http://msdn2.microsoft.com/en-us/library/ms716246.aspx).

        * Support for the `SQL_NUMERIC_STRUCT' data type, which
          provides easier access to the precise definition of numeric
          values. For more information, see Microsoft Knowledgebase
          Article #714556
          (http://msdn2.microsoft.com/en-us/library/ms714556.aspx)

        * Native Windows setup library. This replaces the Qt library
          based interface for configuring DSN information within the
          ODBC Data Sources application.

        * Support for the ODBC descriptor, which improves the handling
          and metadata of columns and parameter data. For more
          information, see Microsoft Knowledgebase Article #716339
          (http://msdn2.microsoft.com/en-us/library/ms716339.aspx).

   * Connector/ODBC 3.51 is the current release of the 32-bit ODBC
     driver, also known as the MySQL ODBC 3.51 driver.  Connector/ODBC
     3.51 has support for ODBC 3.5x specification level 1 (complete
     core API + level 2 features) to continue to provide all
     functionality of ODBC for accessing MySQL.

     With MySQL Connector/ODBC 5.2 now offering both ANSI and Unicode
     drivers, you should expect to upgrade relatively soon.

The manual for versions of Connector/ODBC older than 5.2 can be located
in the corresponding binary or source distribution. Please note that
versions of Connector/ODBC earlier than the 3.51 revision were not
fully compliant with the ODBC specification.

*Note*:

From this section onward, the primary focus of this guide is the
Connector/ODBC 5.2 driver.

*Note*:

Version numbers for MySQL products are formatted as X.X.X.  However,
Windows tools (Control Panel, properties display) may show the version
numbers as XX.XX.XX. For example, the official MySQL formatted version
number 5.0.9 may be displayed by Windows tools as 5.00.09. The two
versions are the same; only the number display format is different.


File: manual.info,  Node: connector-odbc-introduction,  Next: connector-odbc-installation,  Prev: connector-odbc-versions,  Up: connector-odbc

22.1.2 Connector/ODBC Introduction
----------------------------------

* Menu:

* connector-odbc-general-information::  General Information About ODBC and Connector/ODBC

ODBC (Open Database Connectivity) provides a way for client programs to
access a wide range of databases or data sources. ODBC is a
standardized API that enables connections to SQL database servers. It
was developed according to the specifications of the SQL Access Group
and defines a set of function calls, error codes, and data types that
can be used to develop database-independent applications. ODBC usually
is used when database independence or simultaneous access to different
data sources is required.

For more information about ODBC, refer to
`http://support.microsoft.com/kb/110093'.


File: manual.info,  Node: connector-odbc-general-information,  Prev: connector-odbc-introduction,  Up: connector-odbc-introduction

22.1.2.1 General Information About ODBC and Connector/ODBC
..........................................................

* Menu:

* connector-odbc-architecture::  Connector/ODBC Architecture
* connector-odbc-driver-manager::  ODBC Driver Managers

Open Database Connectivity (ODBC) is a widely accepted
application-programming interface (API) for database access. It is
based on the Call-Level Interface (CLI) specifications from X/Open and
ISO/IEC for database APIs and uses Structured Query Language (SQL) as
its database access language.

A survey of ODBC functions supported by Connector/ODBC is given at
*Note connector-odbc-reference-api::. For general information about
ODBC, see `http://support.microsoft.com/kb/110093'.


File: manual.info,  Node: connector-odbc-architecture,  Next: connector-odbc-driver-manager,  Prev: connector-odbc-general-information,  Up: connector-odbc-general-information

22.1.2.2 Connector/ODBC Architecture
....................................

The Connector/ODBC architecture is based on five components, as shown
in the following diagram:

Connector/ODBC Architecture

   * *Application:*

     The Application uses the ODBC API to access the data from the
     MySQL server. The ODBC API in turn communicates with the Driver
     Manager. The Application communicates with the Driver Manager
     using the standard ODBC calls. The Application does not care where
     the data is stored, how it is stored, or even how the system is
     configured to access the data. It needs to know only the Data
     Source Name (DSN).

     A number of tasks are common to all applications, no matter how
     they use ODBC. These tasks are:

        * Selecting the MySQL server and connecting to it.

        * Submitting SQL statements for execution.

        * Retrieving results (if any).

        * Processing errors.

        * Committing or rolling back the transaction enclosing the SQL
          statement.

        * Disconnecting from the MySQL server.

     Because most data access work is done with SQL, the primary tasks
     for applications that use ODBC are submitting SQL statements and
     retrieving any results generated by those statements.

   * *Driver manager:*

     The Driver Manager is a library that manages communication between
     application and driver or drivers. It performs the following tasks:

        * Resolves Data Source Names (DSN). The DSN is a configuration
          string that identifies a given database driver, database,
          database host and optionally authentication information that
          enables an ODBC application to connect to a database using a
          standardized reference.

          Because the database connectivity information is identified
          by the DSN, any ODBC-compliant application can connect to the
          data source using the same DSN reference. This eliminates the
          need to separately configure each application that needs
          access to a given database; instead you instruct the
          application to use a pre-configured DSN.

        * Loading and unloading of the driver required to access a
          specific database as defined within the DSN. For example, if
          you have configured a DSN that connects to a MySQL database
          then the driver manager will load the Connector/ODBC driver
          to enable the ODBC API to communicate with the MySQL host.

        * Processes ODBC function calls or passes them to the driver
          for processing.

   * *Connector/ODBC Driver:*

     The Connector/ODBC driver is a library that implements the
     functions supported by the ODBC API. It processes ODBC function
     calls, submits SQL requests to MySQL server, and returns results
     back to the application. If necessary, the driver modifies an
     application's request so that the request conforms to syntax
     supported by MySQL.

   * *DSN Configuration:*

     The ODBC configuration file stores the driver and database
     information required to connect to the server. It is used by the
     Driver Manager to determine which driver to be loaded according to
     the definition in the DSN. The driver uses this to read connection
     parameters based on the DSN specified. For more information, *Note
     connector-odbc-configuration::.

   * *MySQL Server:*

     The MySQL database where the information is stored. The database
     is used as the source of the data (during queries) and the
     destination for data (during inserts and updates).


File: manual.info,  Node: connector-odbc-driver-manager,  Prev: connector-odbc-architecture,  Up: connector-odbc-general-information

22.1.2.3 ODBC Driver Managers
.............................

An ODBC Driver Manager is a library that manages communication between
the ODBC-aware application and any drivers. Its main functionality
includes:

   * Resolving Data Source Names (DSN).

   * Driver loading and unloading.

   * Processing ODBC function calls or passing them to the driver.

Most ODBC Driver Manager implementations also include an administration
application that makes the configuration of DSN and drivers easier.
Examples and information on ODBC Driver Managers for different
operating systems are listed below:

   * Windows: Microsoft Windows ODBC Driver Manager (`odbc32.dll'). It
     is included in the Windows operating system. See
     `http://support.microsoft.com/kb/110093' for more information.

   * Mac OS X: ODBC Administrator is a GUI application for Mac OS X. It
     provides a simplified configuration mechanism for the iODBC Driver
     Manager. You can configure DSN and driver information either
     through ODBC Administrator or through the iODBC configuration
     files. This also means that you can test ODBC Administrator
     configurations using the `iodbctest' command. See
     `http://support.apple.com/kb/DL895' for more information.

   * Unix:

        * `unixODBC' Driver Manager for Unix (`libodbc.so'). See
          `http://www.unixodbc.org', for more information.

        * `iODBC' Driver Manager for Unix (`libiodbc.so'). See
          `http://www.iodbc.org', for more information.


File: manual.info,  Node: connector-odbc-installation,  Next: connector-odbc-configuration,  Prev: connector-odbc-introduction,  Up: connector-odbc

22.1.3 Connector/ODBC Installation
----------------------------------

* Menu:

* connector-odbc-installation-binary-windows::  Installing Connector/ODBC on Windows
* connector-odbc-installation-binary-unix::  Installing Connector/ODBC on Unix
* connector-odbc-installation-binary-macosx::  Installing Connector/ODBC on Mac OS X
* connector-odbc-installation-source-windows::  Building Connector/ODBC from a Source Distribution on Windows
* connector-odbc-installation-source-unix::  Building Connector/ODBC from a Source Distribution on Unix
* connector-odbc-installation-source-unix-macosx::  Building Connector/ODBC from a Source Distribution on Mac OS X
* connector-odbc-installation-source-development::  Installing Connector/ODBC from the Development Source Tree

This section explains where to download Connector/ODBC, and how to run
the installer, copy the files manually, or build from source.

* Where to Get Connector/ODBC *

You can get a copy of the latest version of Connector/ODBC binaries and
sources from our Web site at
`http://dev.mysql.com/downloads/connector/odbc/'.

For more information about Connector/ODBC, visit
http://www.mysql.com/products/myodbc/.

For more information about licensing, visit
http://www.mysql.com/company/legal/licensing/.

* Choosing Unicode or ANSI Driver *

Connector/ODBC offers the flexibility to handle data using any
character set through its *Unicode-enabled* driver, or the maximum raw
speed for a more limited range of character sets through its *ANSI*
driver. Some users postponed their upgrade to Connector/ODBC 5.1,
remaining with the older 3.51 version to keep this performance edge. As
of Connector/ODBC 5.2, both kinds of drivers are available based on the
5.x code base: you can choose either a Unicode-enabled driver or an
ANSI driver on the download page. The Unicode-enabled driver,
recommended for most users, has no special qualifier in the download
filename. The ANSI driver includes `-ansi-' in the download filename.

*Note*:

You can install either the Unicode driver on a Windows system, or the
ANSI driver, or both. The drivers are distinguished in the list of
installed software and in the names of libraries and directories by a
`w' (for `wide characters') for the Unicode driver, and `a' in the ANSI
driver.

* Choosing Binary or Source Installation Method *

You can install the Connector/ODBC drivers using two different methods:

   * The *binary installation* is the easiest and most straightforward
     method of installation.  You receive all the necessary libraries
     and other files pre-built, with an installer program or batch
     script to perform all necessary copying and configuration.

   * The *source installation* method is intended for platforms where a
     binary installation package is not available, or in situations
     where you want to customize or modify the installation process or
     Connector/ODBC drivers before installation.

     If a binary distribution is not available for a particular
     platform, and you build the driver from the original source code,
     you can contribute the binaries you create to MySQL by sending a
     mail message to <myodbc@lists.mysql.com>, so that it becomes
     available for other users.

* Supported Platforms *

Connector/ODBC can be used on all major platforms supported by MySQL.
You can install it on:

   * Windows XP, 2003, Vista and 7.

   * All Unix-like Operating Systems, including: Amiga, BSDI, DEC,
     FreeBSD, HP-UX 10/11, Linux, NetBSD, OpenBSD, OS/2, SGI Irix,
     Solaris, SunOS, SCO OpenServer, SCO UnixWare, Tru64 Unix.

   * Mac OS X and Mac OS X Server.

*Note*:

On all non-Windows platforms except Mac OS X, the driver is built
against `unixODBC' and is expecting a 2-byte `SQLWCHAR', not 4 bytes as
`iODBC' is using. For this reason, the binaries are *only* compatible
with `unixODBC'; recompile the driver against `iODBC' to use them
together. For further information, see *Note
connector-odbc-driver-manager::.

For further instructions, consult the documentation corresponding to
the platform where you are installing and whether you are running a
binary installer or building from source:

Connector/ODBC installation instructions for each platform, for both
the binary installer or building from source.

Platform               Binary Installer       Build from Source
Windows                *Note Installation     *Note Build
                       Instructions:          Instructions:
                       connector-odbc-installation-binary-windows.connector-odbc-installation-source-windows.
Unix/Linux             *Note Installation     *Note Build
                       Instructions:          Instructions:
                       connector-odbc-installation-binary-unix.connector-odbc-installation-source-unix.
Mac OS X               *Note Installation     
                       Instructions:          
                       connector-odbc-installation-binary-macosx.


File: manual.info,  Node: connector-odbc-installation-binary-windows,  Next: connector-odbc-installation-binary-unix,  Prev: connector-odbc-installation,  Up: connector-odbc-installation

22.1.3.1 Installing Connector/ODBC on Windows
.............................................

* Menu:

* connector-odbc-installation-binary-windows-installer::  Installing the Windows Connector/ODBC Driver Using an Installer
* connector-odbc-installation-binary-windows-dll::  Installing the Windows Connector/ODBC Driver Using the Zipped DLL Package

Before installing the Connector/ODBC drivers on Windows, ensure that
your Microsoft Data Access Components (MDAC) are up to date. You can
obtain the latest version from the Microsoft Data Access and Storage
(http://support.microsoft.com/kb/110093) Web site.

There are different distribution types to use when installing for
Windows. The software that is installed is identical in each case, only
the installation method is different.

   * The *zipped installer* consists of a zipped package containing a
     standalone installation application. To install from this package,
     unzip the installer, and then run the installation application.

     The *MSI installer* is an installation file that can be used with
     the installer included in Windows 2000, Windows XP and Windows
     Server 2003.

     See *Note connector-odbc-installation-binary-windows-installer::
     for the steps to complete the installation with either of these
     installers.

   * The *zipped DLL* package contains DLL files that must be manually
     installed. See *Note
     connector-odbc-installation-binary-windows-dll:: for the steps to
     complete this type of installation.

*Note*:

An OLEDB/ODBC driver for Windows 64-bit is available from Microsoft
Downloads
(http://www.microsoft.com/downloads/details.aspx?FamilyID=000364db-5e8b-44a8-b9be-ca44d18b059b&displaylang=en).


File: manual.info,  Node: connector-odbc-installation-binary-windows-installer,  Next: connector-odbc-installation-binary-windows-dll,  Prev: connector-odbc-installation-binary-windows,  Up: connector-odbc-installation-binary-windows

22.1.3.2 Installing the Windows Connector/ODBC Driver Using an Installer
........................................................................

The zipped or MSI installer packages offer a very simple method for
installing the Connector/ODBC drivers. If you have downloaded the
zipped installer, extract the installer application. The basic
installation process is identical for both installers.

Follow these steps to complete the installation:

  1. Double-click the standalone installer that you extracted, or the
     MSI file you downloaded.

  2. The MySQL Connector/ODBC Setup Wizard starts. Click the `Next'
     button to begin the installation process.

     Connector/ODBC Windows Installer - Welcome

  3. Choose the installation type. The `Typical' installation provides
     the standard files needed to connect to a MySQL database using
     ODBC. The `Complete' option installs all the available files,
     including debug and utility components. Oracle recommends choosing
     one of these two options to complete the installation. If you
     choose one of these methods, click `Next', then proceed to step 5.

     You can also choose a `Custom' installation, where you select the
     individual components to install. If you choose this method, click
     `Next', then proceed to step 4.

     Connector/ODBC Windows Installer - Choosing a Setup type welcome

  4. If you have chosen a custom installation, use the pop-ups to
     select which components to install, then click `Next' to install
     the necessary files.

     Connector/ODBC Windows Installer - Custom Installation welcome

  5. Once the files are copied to their final locations, the
     installation is complete. Click `Finish' to exit the installer.

     Connector/ODBC Windows Installer - Completion welcome

Now that the installation is complete, configure your ODBC connections
using *Note connector-odbc-configuration::.


File: manual.info,  Node: connector-odbc-installation-binary-windows-dll,  Prev: connector-odbc-installation-binary-windows-installer,  Up: connector-odbc-installation-binary-windows

22.1.3.3 Installing the Windows Connector/ODBC Driver Using the Zipped DLL Package
..................................................................................

If you have downloaded the zipped DLL package:

  1. Unzip the installation files.

  2. Run the included batch file to perform an installation to the
     default locations.

  3. Alternatively, install the individual files required for
     Connector/ODBC operation manually.

*Note*:

The following instructions only work for 32-bit Windows systems. If you
have a 64-bit Windows system, use the MSI installer, which installs
both the 32-bit and 64-bit drivers to the correct locations.

To install using the *batch file*:

  1. Unzip the Connector/ODBC zipped DLL package.

  2. Open a command prompt.

  3. Change to the directory created when you unzipped the
     Connector/ODBC zipped DLL package.

  4. Run `Install.bat':

          C:\> Install.bat

     This copies the necessary files into the default location, and
     then registers the Connector/ODBC driver with the Windows ODBC
     manager.

*Note*:

Changing or adding a new DSN (data source name) may be accomplished
using either the GUI, or from the command-line using
`myodbc-installer.exe'.

Although Oracle recommends installing these files in the standard
location, you can also copy the files by hand to an alternative
location - for example, to run or test different versions of the
Connector/ODBC driver on the same machine. To *copy the files* to a
location of your choice, use the following steps:

  1. Unzip the Connector/ODBC zipped DLL package.

  2. Open a command prompt.

  3. Change to the directory created when you unzipped the
     Connector/ODBC zipped DLL package.

  4. Copy the library files to a suitable directory. The default
     location is the default Windows system directory
     `\Windows\System32':

          C:\> copy lib\myodbc5S.dll \Windows\System32
          C:\> copy lib\myodbc5S.lib \Windows\System32

          If installing the Unicode-enabled driver:
          C:\> copy lib\myodbc5w.dll \Windows\System32
          C:\> copy lib\myodbc5w.lib \Windows\System32

          If installing the ANSI driver:
          C:\> copy lib\myodbc5a.dll \Windows\System32
          C:\> copy lib\myodbc5a.lib \Windows\System32

  5. Copy the Connector/ODBC tools. These must be placed in a directory
     that is in the system `%PATH%'.  The default is to install these
     into the Windows system directory `\Windows\System32':

          C:\> copy bin\myodbc-installer.exe \Windows\System32

  6. Optionally, copy the help files. For these files to be accessible
     through the help system, they must be installed in the Windows
     system directory:

          C:\> copy doc\*.hlp \Windows\System32

  7. Finally, register the Connector/ODBC driver with the ODBC manager:

          For Unicode-enabled driver:
          C:\> myodbc-installer -a -d -t"MySQL ODBC 5.2 Driver;\
            DRIVER=myodbc5w.dll;SETUP=myodbc5S.dll"

          For ANSI driver:
          C:\> myodbc-installer -a -d -t"MySQL ODBC 5.2 Driver;\
            DRIVER=myodbc5a.dll;SETUP=myodbc5S.dll"

     If you installed these files into a non-default location, change
     the references to the DLL files and command location in the above
     statement


File: manual.info,  Node: connector-odbc-installation-binary-unix,  Next: connector-odbc-installation-binary-macosx,  Prev: connector-odbc-installation-binary-windows,  Up: connector-odbc-installation

22.1.3.4 Installing Connector/ODBC on Unix
..........................................

* Menu:

* connector-odbc-installation-binary-unix-tarball::  Installing Connector/ODBC from a Binary Tarball Distribution
* connector-odbc-installation-binary-unix-rpm::  Installing Connector/ODBC from an RPM Distribution

There are two methods available for installing Connector/ODBC on Unix
from a binary distribution. For most Unix environments, you will use
the *tarball* distribution. For Linux systems, there is also an *RPM*
distribution available.

*Note*:

To install Connector/ODBC 5.x on Unix requires unixODBC 2.2.12 or later
to be installed.


File: manual.info,  Node: connector-odbc-installation-binary-unix-tarball,  Next: connector-odbc-installation-binary-unix-rpm,  Prev: connector-odbc-installation-binary-unix,  Up: connector-odbc-installation-binary-unix

22.1.3.5 Installing Connector/ODBC from a Binary Tarball Distribution
.....................................................................

To install the driver from a tarball distribution (`.tar.gz' file),
download the latest version of the driver for your operating system and
follow these steps that demonstrate the process using the Linux version
of the tarball, substituting the appropriate file and directory names
based on the package you download:

     shell> su root
     shell> gunzip mysql-connector-odbc-5.2.2-i686-pc-linux.tar.gz
     shell> tar xvf mysql-connector-odbc-5.2.2-i686-pc-linux.tar
     shell> cd mysql-connector-odbc-5.2.2-i686-pc-linux

Read the installation instructions in the `INSTALL' file and execute
these commands.

Then see *Note connector-odbc-configuration-dsn-unix:: to configure the
DSN for Connector/ODBC. For more information, refer to the `INSTALL'
file that comes with your distribution.


File: manual.info,  Node: connector-odbc-installation-binary-unix-rpm,  Prev: connector-odbc-installation-binary-unix-tarball,  Up: connector-odbc-installation-binary-unix

22.1.3.6 Installing Connector/ODBC from an RPM Distribution
...........................................................

To install or upgrade Connector/ODBC from an RPM distribution on Linux,
simply download the RPM distribution of the latest version of
Connector/ODBC and follow the instructions below.  Use `su root' to
become `root', then install the RPM file.

If you are installing for the first time:

     shell> su root
     shell> rpm -ivh mysql-connector-odbc-5.2.2.i386.rpm

If the driver exists, upgrade it like this:

     shell> su root
     shell> rpm -Uvh mysql-connector-odbc-5.2.2.i386.rpm

If there is any dependency error for MySQL client library,
`libmysqlclient', simply ignore it by supplying the `--nodeps' option,
and then make sure the MySQL client shared library is in the path or set
through `LD_LIBRARY_PATH'.

This installs the driver libraries and related documents to
`/usr/local/lib' and `/usr/share/doc/MyODBC', respectively. See *Note
connector-odbc-configuration-dsn-unix:: for the post-installation
configuration steps.

To *uninstall* the driver, become `root' and execute an `rpm' command:

     shell> su root
     shell> rpm -e mysql-connector-odbc


File: manual.info,  Node: connector-odbc-installation-binary-macosx,  Next: connector-odbc-installation-source-windows,  Prev: connector-odbc-installation-binary-unix,  Up: connector-odbc-installation

22.1.3.7 Installing Connector/ODBC on Mac OS X
..............................................

Mac OS X is based on the FreeBSD operating system, and you can normally
use the MySQL network port for connecting to MySQL servers on other
hosts. Installing the Connector/ODBC driver lets you connect to MySQL
databases on any platform through the ODBC interface. If your
application requires an ODBC interface, install the Connector/ODBC
driver. Applications that require or can use ODBC (and therefore the
Connector/ODBC driver) include ColdFusion, Filemaker Pro, 4th Dimension
and many other applications.

On Mac OS X, the ODBC Administrator, based on the `iODBC' manager,
provides easy administration of ODBC drivers and configuration,
allowing the updates of the underlying `iODBC' configuration files
through a GUI tool. The tool is included in Mac OS X v10.5 and earlier;
users of later versions of Mac OS X need to download and install it
manually.

There are two ways to install Connector/ODBC on Mac OS X. You can use
either the package provided in a compressed tar archive that you
manually install, or use a compressed disk image (`.dmg') file, which
includes an installer.

To install using the compressed tar archive:

  1. Download the compressed tar archive.

  2. Extract the archive:

          shell> tar xvzf mysql-connector-odbc-5.X.Y-osx10.Z-x86-(32|64)bit.tar.gz

  3. The directory created contains two subdirectories, `lib' and
     `bin'. Copy these to a suitable location such as `/usr/local':

          shell> cp bin/* /usr/local/bin
          shell> cp lib/* /usr/local/lib

  4. Finally, register the driver with iODBC using the
     `myodbc-installer' tool that was included in the package:

          shell> myodbc-installer -a -d -t"MySQL ODBC 5.2 Driver;Driver=/usr/local/lib/libmyodbc5w.so"

To verify the installed drivers, either use the ODBC Administrator
application or the `myodbc-installer' utility:

     shell> myodbc-installer -q -d


File: manual.info,  Node: connector-odbc-installation-source-windows,  Next: connector-odbc-installation-source-unix,  Prev: connector-odbc-installation-binary-macosx,  Up: connector-odbc-installation

22.1.3.8 Building Connector/ODBC from a Source Distribution on Windows
......................................................................

You only need to build Connector/ODBC from source on Windows to modify
the source or installation location. If you are unsure whether to
install from source, please use the binary installation detailed in
*Note connector-odbc-installation-binary-windows::.

Building Connector/ODBC from source on Windows requires a number of
different tools and packages:

   * MDAC, Microsoft Data Access SDK from
     `http://support.microsoft.com/kb/110093'.

   * Suitable C compiler, such as Microsoft Visual C++ or the C
     compiler included with Microsoft Visual Studio.

     Microsoft Visual Studio 7 and 8 are preferred, and well-tested.

   * Connector/ODBC 5.2: `cmake'.

   * MySQL client libraries and include files from MySQL 4.0.0 or
     higher. (Preferably MySQL 4.0.16 or higher). This is required
     because Connector/ODBC uses calls and structures that exist only
     starting from this version of the library.  To get the client
     libraries and include files, visit
     `http://dev.mysql.com/downloads/'.

* Build Steps *

Set the environment variables for the Visual Studio toolchain.  Visual
Studio includes a batch file to set these for you, and installs a
`Start' menu shortcut that opens a command prompt with these variables
set.

Set `MYSQL_DIR' to the MySQL server installation path, while using the
short-style file names. For example:

     C:\> set MYSQL_DIR=C:\PROGRA~1\MySQL\MYSQLS~1.0

Build Connector/ODBC using the `cmake' command-line tool by executing
the following from the source root directory (in a command prompt
window):

     C:\> cmake -G "Visual Studio 8 2005"

This produces a project file that you can open with Visual Studio, or
build from the command line with either of the following commands:

     C:\> devenv.com MySQL_Connector_ODBC.sln /build Release
     C:\> devenv.com MySQL_Connector_ODBC.sln /build RelWithDebInfo

To compile a debug build, set the `cmake' build type so that the
correct versions of the MySQL client libraries are used:

     C:\> cmake -G "Visual Studio 8 2005" -DWITH_DEBUG=1
     C:\> devenv.com MySQL_Connector_ODBC.sln /build Debug

Upon completion, the executables are in the `bin/' and `lib/'
subdirectories.

See *Note connector-odbc-installation-binary-windows-dll:: for the
`copy' commands to complete the installation.


File: manual.info,  Node: connector-odbc-installation-source-unix,  Next: connector-odbc-installation-source-unix-macosx,  Prev: connector-odbc-installation-source-windows,  Up: connector-odbc-installation

22.1.3.9 Building Connector/ODBC from a Source Distribution on Unix
...................................................................

*Note*:

Connector/5.2 uses `cmake' for build, rather than `autoconf' and its
`configure' command.

You need the following tools to build MySQL from source on Unix:

   * A working ANSI C++ compiler. GCC 4.2.1 or later, Sun Studio 10 or
     later, Visual Studio 2008 or later, and many current
     vendor-supplied compilers are known to work.

   * `cmake'.

   * MySQL client libraries and include files from MySQL 4.0.0 or
     higher. (Preferably MySQL 4.0.16 or higher). This is required
     because Connector/ODBC uses calls and structures that exist only
     starting from this version of the library.  To get the client
     libraries and include files, visit
     `http://dev.mysql.com/downloads/'.

     If you have built your own MySQL server or client libraries from
     source using the GNU autotools, use the
     `--enable-thread-safe-client' option to `configure' when the
     libraries were built.  No special option is needed if you
     configure with `cmake'.

     Also, ensure that the `libmysqlclient' library was built and
     installed as a shared library.

   * A compatible ODBC manager must be installed. Connector/ODBC is
     known to work with the `iODBC' and `unixODBC' managers. See *Note
     connector-odbc-driver-manager:: for more information.

   * If you are using a character set that is not compiled into the
     MySQL client library, install the MySQL character definitions from
     the `charsets' directory into SHAREDIR (by default,
     `/usr/local/mysql/share/mysql/charsets').  These should be in
     place if you have installed the MySQL server on the same machine.
     See *Note charset:: for more information on character set support.

Once you have all the required files, unpack the source files to a
separate directory, then run `configure' and build the library using
`make'.

* Typical `cmake' Options *

`iODBC' is the default ODBC library used by Connector/ODBC.
Alternatively, `unixODBC' may be used by passing in the appropriate
option to `cmake'. For example:

     shell> cmake -G "Unix Makefiles" -DWITH_UNIXODBC=1

When you run `cmake', you might add options to the command line. Here
are some examples:

   * `-DODBC_INCLUDES=DIR_NAME': Used when the ODBC include directory
     is not found within the system `$PATH'.

   * `-DODBC_LIB_DIR=DIR_NAME': Used when the ODBC library directory is
     not found within the system `$PATH'.

   * `-DWITH_UNIXODBC=1': Enables unixODBC support.

* Additional configure Options *

There are a number of other options that you need, or want, to set when
configuring the Connector/ODBC driver before it is built.

   * To link the driver with MySQL thread safe client libraries
     `libmysqlclient_r.so' or `libmysqlclient_r.a', specify the
     following `configure' option:

          --enable-thread-safe

     and can be disabled (default) using

          --disable-thread-safe

     This option enables the building of the driver thread-safe library
     `libmyodbc3_r.so' from by linking with MySQL thread-safe client
     library `libmysqlclient_r.so'. (The extensions are OS-dependent.)

     If the compilation with the thread-safe option fails, it may be
     because the correct thread-libraries on the system could not be
     located. Set the value of `LIBS' to point to the correct thread
     library for your system.

          LIBS="-lpthread" ./configure ..

   * You can enable or disable the shared and static versions of
     Connector/ODBC using these options:

          --enable-shared[=yes|no]
          --disable-shared
          --enable-static[=yes|no]
          --disable-static

   * By default, all the binary distributions are built as non-debug
     versions (configured with `--without-debug').

     To enable debugging information, build the driver from a source
     distribution with the proper configuration option to enable
     debugging support. See *Note source-configuration-options::.

   * This option is available only for source trees that have been
     obtained from the Subversion repository. This option does not
     apply to the packaged source distributions.

     By default, the driver is built with the `--without-docs' option.
     If you would like the documentation to be built, then execute
     `configure' with:

          --with-docs

* Build Steps for Unix *

To build the driver libraries, execute `make':

     shell> make

If any errors occur, correct them and continue the build process. If
you are not able to build, then send a detailed email to
<myodbc@lists.mysql.com> for further assistance.

* Building Shared Libraries *

On most platforms, MySQL does not build or support `.so' (shared)
client libraries by default.  This is based on our experience of
problems when building shared libraries.

In cases like this, you have to download the MySQL distribution and
configure it with these options:

     --without-server --enable-shared

To build shared driver libraries, specify the `--enable-shared' option
for `configure'. By default, `configure' does not enable this option.

If you have configured with the `--disable-shared' option, you can
build the `.so' file from the static libraries using the following
commands:

     shell> cd mysql-connector-odbc-3.51.01
     shell> make
     shell> cd driver
     shell> CC=/usr/bin/gcc \
               $CC -bundle -flat_namespace -undefined error \
               -o .libs/libmyodbc3-3.51.01.so \
               catalog.o connect.o cursor.o dll.o error.o execute.o \
               handle.o info.o misc.o myodbc3.o options.o prepare.o \
               results.o transact.o utility.o \
               -L/usr/local/mysql/lib/mysql/ \
               -L/usr/local/iodbc/lib/ \
               -lz -lc -lmysqlclient -liodbcinst

Make sure to change `-liodbcinst' to `-lodbcinst' if you are using
`unixODBC' instead of `iODBC', and configure the library paths
accordingly.

This builds and places the `libmyodbc3-3.51.01.so' file in the `.libs'
directory. Copy this file to the Connector/ODBC library installation
directory (`/usr/local/lib', or the `lib' directory under the
installation directory that you supplied with the `--prefix' option).

     shell> cd .libs
     shell> cp libmyodbc3-3.51.01.so /usr/local/lib
     shell> cd /usr/local/lib
     shell> ln -s libmyodbc3-3.51.01.so libmyodbc3.so

To build the thread-safe driver library:

     shell> CC=/usr/bin/gcc \
               $CC -bundle -flat_namespace -undefined error
               -o .libs/libmyodbc3_r-3.51.01.so
               catalog.o connect.o cursor.o dll.o error.o execute.o
               handle.o info.o misc.o myodbc3.o options.o prepare.o
               results.o transact.o utility.o
               -L/usr/local/mysql/lib/mysql/
               -L/usr/local/iodbc/lib/
               -lz -lc -lmysqlclient_r -liodbcinst

* Installing Driver Libraries *

To install the driver libraries, execute the following command:

     shell> make install

That command installs one of the following sets of libraries:

For Connector/ODBC 3.51:

   * `libmyodbc3.so'

   * `libmyodbc3-3.51.01.so', where 3.51.01 is the version of the driver

   * `libmyodbc3.a'

For thread-safe Connector/ODBC 3.51:

   * `libmyodbc3_r.so'

   * `libmyodbc3-3_r.51.01.so'

   * `libmyodbc3_r.a'

For more information on build process, refer to the `INSTALL' file that
comes with the source distribution. Note that if you are trying to use
the `make' from Sun, you may end up with errors. On the other hand, GNU
`gmake' should work fine on all platforms.

* Testing Connector/ODBC on Unix *

To run the basic samples provided in the distribution with the
libraries that you built, use the following command:

     shell> make test

Before running the tests, create the DSN 'myodbc3' in `odbc.ini' and
set the environment variable `ODBCINI' to the correct `odbc.ini' file;
and MySQL server is running.  You can find a sample `odbc.ini' with the
driver distribution.

You can even modify the `samples/run-samples' script to pass the
desired DSN, UID, and PASSWORD values as the command-line arguments to
each sample.


File: manual.info,  Node: connector-odbc-installation-source-unix-macosx,  Next: connector-odbc-installation-source-development,  Prev: connector-odbc-installation-source-unix,  Up: connector-odbc-installation

22.1.3.10 Building Connector/ODBC from a Source Distribution on Mac OS X
........................................................................

To build the driver on Mac OS X (Darwin), make use of the following
`configure' example:

     shell> ./configure --prefix=/usr/local
               --with-unixODBC=/usr/local
               --with-mysql-path=/usr/local/mysql
               --disable-shared
               --enable-gui=no
               --host=powerpc-apple

The command assumes that the `unixODBC' and MySQL are installed in the
default locations. If not, configure accordingly.

On Mac OS X, `--enable-shared' builds `.dylib' files by default. You
can build `.so' files like this:

     shell> make
     shell> cd driver
     shell> CC=/usr/bin/gcc \
               $CC -bundle -flat_namespace -undefined error
               -o .libs/libmyodbc3-3.51.01.so *.o
               -L/usr/local/mysql/lib/
               -L/usr/local/iodbc/lib
               -liodbcinst -lmysqlclient -lz -lc

To build the thread-safe driver library:

     shell> CC=/usr/bin/gcc \
               $CC -bundle -flat_namespace -undefined error
               -o .libs/libmyodbc3-3.51.01.so *.o
               -L/usr/local/mysql/lib/
               -L/usr/local/iodbc/lib
               -liodbcinst -lmysqlclienti_r -lz -lc -lpthread

Make sure to change the `-liodbcinst' to `-lodbcinst' in case of using
`unixODBC' instead of `iODBC' and configure the libraries path
accordingly.

In Apple's version of GCC, both `cc' and `gcc' are actually symbolic
links to `gcc3'.

Copy this library to the `$prefix/lib' directory and symlink to
`libmyodbc3.so'.

You can cross-check the output shared-library properties using this
command:

     shell> otool -LD .libs/libmyodbc3-3.51.01.so


File: manual.info,  Node: connector-odbc-installation-source-development,  Prev: connector-odbc-installation-source-unix-macosx,  Up: connector-odbc-installation

22.1.3.11 Installing Connector/ODBC from the Development Source Tree
....................................................................

*Caution*:

Read this section only if you are interested in helping us test our new
code. To just get MySQL Connector/ODBC up and running on your system,
use a standard release distribution.

To obtain the most recent development source tree, first download and
install Bazaar from the Bazaar VCS Web site (http://bazaar-vcs.org).
Bazaar is supported by any platform that supports Python, and is
therefore compatible with any Linux, Unix, Windows, or Mac OS X host.
Instructions for downloading and installing Bazaar on the different
platforms are available on the Bazaar Web site.

Building from the source trees requires the following tools:

   * `autoconf' 2.52 (or newer).

   * `automake' 1.4 (or newer).

   * `libtool' 1.4 (or newer).

   * `m4'.

The most recent development source tree is available from our public
Subversion trees at `http://dev.mysql.com/tech-resources/sources.html'.

To check out the Connector/ODBC sources, change to the directory where
you want the copy of the Connector/ODBC tree to be stored, then use the
following command:

     shell> bzr branch lp:myodbc

You should now have a copy of the entire Connector/ODBC source tree in
the directory `connector-odbc3'. To build from this source tree on Unix
or Linux, follow these steps:

     shell> cd myodbc
     shell> aclocal
     shell> autoheader
     shell> libtoolize -c -f
     shell> autoconf
     shell> automake;
     shell> ./configure  # Add your favorite options here
     shell> make

When the build is done, run `make install' to install the
Connector/ODBC driver on your system.

If you have gotten to the `make' stage and the distribution does not
compile, please report it to <myodbc@lists.mysql.com>.

On Windows, make use of Windows Makefiles `WIN-Makefile' and
`WIN-Makefile_debug' in building the driver.  For more information, see
*Note connector-odbc-installation-source-windows::.

After the initial checkout operation to get the source tree, run `bzr
pull' periodically to update your source according to the latest
version.


File: manual.info,  Node: connector-odbc-configuration,  Next: connector-odbc-examples,  Prev: connector-odbc-installation,  Up: connector-odbc

22.1.4 Configuring Connector/ODBC
---------------------------------

* Menu:

* connector-odbc-configuration-dsn::  Overview of Connector/ODBC Data Source Names
* connector-odbc-configuration-connection-parameters::  Connector/ODBC Connection Parameters
* connector-odbc-configuration-dsn-windows::  Configuring a Connector/ODBC DSN on Windows
* connector-odbc-configuration-dsn-macosx::  Configuring a Connector/ODBC DSN on Mac OS X
* connector-odbc-configuration-dsn-unix::  Configuring a Connector/ODBC DSN on Unix
* connector-odbc-configuration-connection-without-dsn::  Connecting Without a Predefined DSN
* connector-odbc-configuration-connection-pooling::  ODBC Connection Pooling
* connector-odbc-configuration-trace::  Getting an ODBC Trace File

Before you connect to a MySQL database using the Connector/ODBC driver,
you configure an ODBC Data Source Name (DSN). The DSN associates the
various configuration parameters required to communicate with a
database to a specific name. You use the DSN in an application to
communicate with the database, rather than specifying individual
parameters within the application itself.  DSN information can be
user-specific, system-specific, or provided in a special file. ODBC
data source names are configured in different ways, depending on your
platform and ODBC driver.


File: manual.info,  Node: connector-odbc-configuration-dsn,  Next: connector-odbc-configuration-connection-parameters,  Prev: connector-odbc-configuration,  Up: connector-odbc-configuration

22.1.4.1 Overview of Connector/ODBC Data Source Names
.....................................................

A Data Source Name associates the configuration parameters for
communicating with a specific database. Generally, a DSN consists of
the following parameters:

   * Name

   * Host Name

   * Database Name

   * Login

   * Password

In addition, different ODBC drivers, including Connector/ODBC, may
accept additional driver-specific options and parameters.

There are three types of DSN:

   * A _System DSN_ is a global DSN definition that is available to any
     user and application on a particular system. A System DSN can
     normally only be configured by a systems administrator, or by a
     user who has specific permissions that let them create System DSNs.

   * A _User DSN_ is specific to an individual user, and can be used to
     store database connectivity information that the user regularly
     uses.

   * A _File DSN_ uses a simple file to define the DSN configuration.
     File DSNs can be shared between users and machines and are
     therefore more practical when installing or deploying DSN
     information as part of an application across many machines.

DSN information is stored in different locations depending on your
platform and environment.


File: manual.info,  Node: connector-odbc-configuration-connection-parameters,  Next: connector-odbc-configuration-dsn-windows,  Prev: connector-odbc-configuration-dsn,  Up: connector-odbc-configuration

22.1.4.2 Connector/ODBC Connection Parameters
.............................................

You can specify the parameters in the following tables for
Connector/ODBC when configuring a DSN:

   * *Note codbc-dsn-config-options::

   * *Note codbc-dsn-option-flags::

Users on Windows can use the Options and Advanced panels when
configuring a DSN to set these parameters; see *Note
codbc-dsn-config-options:: for information on which options are related
to which fields and check boxes. On Unix and Mac OS X, use the
parameter name and value as the keyword/value pair in the DSN
configuration. Alternatively, you can set these parameters within the
`InConnectionString' argument in the `SQLDriverConnect()' call.

*Connector/ODBC DSN Configuration Options*

Parameter   Default Value  Comment
`user'      ODBC           The user name used to connect to MySQL.
`uid'       ODBC           Synonymous with `user'. Added in 3.51.16.
`server'    `localhost'    The host name of the MySQL server.
`database'                 The default database.
`option'    0              Options that specify how Connector/ODBC works.
                           See *Note codbc-dsn-option-flags:: and *Note
                           codbc-dsn-option-combos::.
`port'      3306           The TCP/IP port to use if `server' is not
                           `localhost'.
`initstmt'                 Initial statement. A statement to execute when
                           connecting to MySQL. In version 3.51 the
                           parameter is called `stmt'. Note: the driver
                           supports the initial statement being executed
                           only at the time of the initial connection.
`password'                 The password for the `user' account on
                           `server'.
`pwd'                      Synonymous with `password'. Added in 3.51.16.
`socket'                   The Unix socket file or Windows named pipe to
                           connect to if `server' is `localhost'.
`sslca'                    The path to a file with a list of trust SSL
                           CAs. Added in 3.51.16.
`sslcapath'                The path to a directory that contains trusted
                           SSL CA certificates in PEM format. Added in
                           3.51.16.
`sslcert'                  The name of the SSL certificate file to use
                           for establishing a secure connection. Added in
                           3.51.16.
`sslcipher'                A list of permissible ciphers to use for SSL
                           encryption. The cipher list has the same
                           format as the `openssl ciphers' command. Added
                           in 3.51.16.
`sslkey'                   The name of the SSL key file to use for
                           establishing a secure connection. Added in
                           3.51.16.
`charset'                  The character set to use for the connection.
                           Added in 3.51.17.
`sslverify'                If set to 1, the SSL certificate will be
                           verified when used with the MySQL connection.
                           If not set, then the default behavior is to
                           ignore SSL certificate verification.
`readtimeout'               The timeout in seconds for attempts to read
                           from the server. Each attempt uses this
                           timeout value and there are retries if
                           necessary, so the total effective timeout
                           value is three times the option value. You can
                           set the value so that a lost connection can be
                           detected earlier than the TCP/IP
                           `Close_Wait_Timeout' value of 10 minutes. This
                           option works only for TCP/IP connections, and
                           only for Windows prior to MySQL 5.1.12.
                           Corresponds to the `MYSQL_OPT_READ_TIMEOUT'
                           option of the MySQL Client Library. Added in
                           3.51.27.
`writetimeout'               The timeout in seconds for attempts to write
                           to the server. Each attempt uses this timeout
                           value and there are `net_retry_count' retries
                           if necessary, so the total effective timeout
                           value is `net_retry_count' times the option
                           value. This option works only for TCP/IP
                           connections, and only for Windows prior to
                           MySQL 5.1.12. Corresponds to the
                           `MYSQL_OPT_WRITE_TIMEOUT' option of the MySQL
                           Client Library. Added in 3.51.27.
`interactive'               Enables the `CLIENT_INTERACTIVE' connection
                           option of `mysql_real_connect'.
`prefetch'  0              When set to a non-zero value N, causes all
                           queries in the connection to return N rows at
                           a time rather than the entire result set.
                           Useful for queries against very large tables
                           where it is not practical to retrieve the
                           whole result set at once. You can scroll
                           through the result set, N records at a time.
                           
                           This option works only with forward-only
                           cursors. It does not work when the option
                           parameter `MULTI_STATEMENTS' is set. It can be
                           used in combination with the option parameter
                           `NO_CACHE'. Its behavior in ADO applications
                           is undefined: the prefetching might or might
                           not occur.
`no_ssps'   0              In Connector/ODBC 5.2, by default, server-side
                           prepared statements are used. When this option
                           is set to a non-zero value, prepared
                           statements are emulated on the client side,
                           which is the same behavior as in 5.1 and 3.51.
                           Added in 5.2.
`can_handle_exp_pwd'0              Indicates that the application can deal with
                           an expired password, which is signalled by an
                           SQL state of `08004' (`Server rejected the
                           connection') and a native error code
                           `ER_MUST_CHANGE_PASSWORD_LOGIN' (1862).  The
                           connection is `sandboxed', and can do nothing
                           other than issue a `SET PASSWORD' statement.
                           To establish a connection in this case, your
                           application must either use the `initstmt'
                           connection option to set a new password at the
                           start, or issue a `SET PASSWORD' statement
                           immediately after connecting. Once the expired
                           password is reset, the restrictions on the
                           connection are lifted. See `ALTER USER' Syntax
                           (http://dev.mysql.com/doc/refman/5.6/en/alter-user.html)
                           for details about password expiration for
                           MySQL server accounts. Added in 5.2.4.

*Note*:

The SSL configuration parameters can also be automatically loaded from
a `my.ini' or `my.cnf' file. See *Note option-files::.

The behavior of Connector/ODBC can be modified by using special option
parameters listed in *Note codbc-dsn-option-flags::, specified in the
connection string or through the GUI dialog box. Most of the connection
parameters also have their own numeric constant values, which can be
added up as a combined value for the `option' parameter for specifying
those options. However, the numerical `option' value in the connection
string can only enable, but not disable parameters enabled on the DSN,
which can only be overridden by specifying the option parameters using
their text names in the connection string.

*Note*:

While the combined numerical value for the `option' parameter can be
easily constructed by addition of the options' constant values,
decomposing the value to verify if particular options are enabled can
be difficult. We recommend using the options' parameter names instead
in the connection string, because they are self-explanatory. Also
notice that not every option parameter has a constant value.

*Connector/ODBC Option Parameters*

Parameter Name                GUI Option         Constant    Description
                                                 Value       
`FOUND_ROWS'                  Return matched     2           The client cannot handle
                              rows instead of                when MySQL returns the true
                              affected rows                  value of affected rows. If
                                                             this flag is set, MySQL
                                                             returns `found rows'
                                                             instead. You must have MySQL
                                                             3.21.14 or newer for this to
                                                             work.
`BIG_PACKETS'                 Allow big result   8           Do not set any packet limit
                              set                            for results and bind
                                                             parameters. Without this
                                                             option, parameter binding
                                                             will be truncated to 255
                                                             characters.
`NO_PROMPT'                   Don't prompt when  16          Do not prompt for questions
                              connecting                     even if driver would like to
                                                             prompt.
`DYNAMIC_CURSOR'              Enable Dynamic     32          Enable or disable the
                              Cursors                        dynamic cursor support.
`NO_SCHEMA'                   Ignore schema in   64          Ignore use of database name
                              column                         in DB_NAME.TBL_NAME.COL_NAME.
                              specifications                 
`NO_DEFAULT_CURSOR'           Disable            128         Force use of ODBC manager
                              driver-provided                cursors (experimental).
                              cursor support                 
`NO_LOCALE'                   Don't use          256         Disable the use of extended
                              setlocale()                    fetch (experimental).
`PAD_SPACE'                   Pad CHAR to full   512         Pad *Note `CHAR': char.
                              length with space              columns to full column
                                                             length.
`FULL_COLUMN_NAMES'           Include table      1024        `SQLDescribeCol()' returns
                              name in                        fully-qualified column names.
                              SQLDescribeCol()               
`COMPRESSED_PROTO'            Use compression    2048        Use the compressed
                                                             client/server protocol.
`IGNORE_SPACE'                Ignore space       4096        Tell server to ignore space
                              after function                 after function name and
                              names                          before ``('' (needed by
                                                             PowerBuilder). This makes
                                                             all function names keywords.
`NAMED_PIPE'                  Named Pipe         8192        Connect with named pipes to
                                                             a *Note `mysqld': mysqld.
                                                             server running on NT.
`NO_BIGINT'                   Treat BIGINT       16384       Change *Note `BIGINT':
                              columns as INT                 integer-types. columns to
                              columns                        *Note `INT': integer-types.
                                                             columns (some applications
                                                             cannot handle *Note
                                                             `BIGINT': integer-types.).
`NO_CATALOG'                  Disable catalog    32768       Forces results from the
                              support                        catalog functions, such as
                                                             `SQLTables', to always return
                                                             `NULL' and the driver to
                                                             report that catalogs are not
                                                             supported.
`USE_MYCNF'                   Read options from  65536       Read parameters from the
                              `my.cnf'                       `[client]' and `[odbc]'
                                                             groups from `my.cnf'.
`SAFE'                        Enable safe        131072      Add some extra safety checks.
                              options                        
`NO_TRANSACTIONS'             Disable            262144      Disable transactions.
                              transaction                    
                              support                        
`LOG_QUERY'                   Log queries to     524288      Enable query logging to
                              %TEMP%\myodbc.sql              `c:\myodbc.sql'(`/tmp/myodbc.sql')
                                                             file. (Enabled only in debug
                                                             mode.)
`NO_CACHE'                    Don't cache        1048576     Do not cache the results
                              results of                     locally in the driver,
                              forward-only                   instead read from server
                              cursors                        (*Note `mysql_use_result()':
                                                             mysql-use-result.).  This
                                                             works only for forward-only
                                                             cursors. This option is very
                                                             important in dealing with
                                                             large tables when you do not
                                                             want the driver to cache the
                                                             entire result set.
`FORWARD_CURSOR'              Force use of       2097152     Force the use of
                              forward-only                   `Forward-only' cursor type.
                              cursors                        In cases of applications
                                                             setting the default
                                                             static/dynamic cursor type
                                                             and one wants the driver to
                                                             use noncache result sets,
                                                             this option ensures the
                                                             forward-only cursor behavior.
`AUTO_RECONNECT'              Enable automatic   4194304     Enables auto-reconnection
                              reconnect                      functionality. Do not use
                                                             this option with
                                                             transactions, since an
                                                             auto-reconnection during a
                                                             incomplete transaction may
                                                             cause corruption. Note that
                                                             an auto-reconnected
                                                             connection will not inherit
                                                             the same settings and
                                                             environment as the original
                                                             connection.  Added in
                                                             3.51.13.
`AUTO_IS_NULL'                Enable             8388608     When `AUTO_IS_NULL' is set,
                              SQL_AUTO_IS_NULL               the driver does not change
                                                             the default value of
                                                             `sql_auto_is_null', leaving
                                                             it at 1, so you get the
                                                             MySQL default, not the SQL
                                                             standard behavior.
                                                             
                                                             When `AUTO_IS_NULL' is not
                                                             set, the driver changes the
                                                             default value of
                                                             `SQL_AUTO_IS_NULL' to 0 after
                                                             connecting, so you get the
                                                             SQL standard, not the MySQL
                                                             default behavior.
                                                             
                                                             Thus, omitting the flag
                                                             disables the compatibility
                                                             option and forces SQL
                                                             standard behavior.
                                                             
                                                             See `IS NULL'. Added in
                                                             3.51.13.
`ZERO_DATE_TO_MIN'            Return             16777216    Translates zero dates
                              SQL_NULL_DATA for              (`XXXX-00-00') into the
                              zero date                      minimum date values
                                                             supported by ODBC,
                                                             `XXXX-01-01'. This resolves
                                                             an issue where some
                                                             statements will not work
                                                             because the date returned
                                                             and the minimum ODBC date
                                                             value are incompatible.
                                                             Added in 3.51.17.
`MIN_DATE_TO_ZERO'            Bind minimal date  33554432    Translates the minimum ODBC
                              as zero date                   date value (`XXXX-01-01') to
                                                             the zero date format
                                                             supported by MySQL
                                                             (`XXXX-00-00'). This
                                                             resolves an issue where some
                                                             statements will not work
                                                             because the date returned
                                                             and the minimum ODBC date
                                                             value are incompatible.
                                                             Added in 3.51.17.
`MULTI_STATEMENTS'            Allow multiple     67108864    Enables support for batched
                              statements                     statements. Added in 3.51.18.
`COLUMN_SIZE_S32'             Limit column size  134217728   Limits the column size to a
                              to signed 32-bit               signed 32-bit value to
                              range                          prevent problems with larger
                                                             column sizes in applications
                                                             that do not support them.
                                                             This option is automatically
                                                             enabled when working with
                                                             ADO applications. Added in
                                                             3.51.22.
`NO_BINARY_RESULT'            Always handle      268435456   When set, this option
                              binary function                disables charset 63 for
                              results as                     columns with an empty
                              character data                 `org_table'. Added in
                                                             3.51.26.
`DFLT_BIGINT_BIND_STR'        [This option is    536870912   Causes `BIGINT' parameters
                              not on the GUI                 to be bound as strings.
                              dialog box]                    Microsoft Access treats
                                                             `BIGINT' as a string on
                                                             linked tables. The value is
                                                             read correctly, but bound as
                                                             a string. This option is
                                                             used automatically if the
                                                             driver is used by Microsoft
                                                             Access. Added in 5.1.3.
`NO_INFORMATION_SCHEMA'       Don't use          1073741824  Tells catalog functions not
                              INFORMATION_SCHEMA             to use `INFORMATION_SCHEMA',
                              for metadata                   but rather use legacy
                                                             algorithms. The trade-off
                                                             here is usually speed for
                                                             information quality. Using
                                                             `INFORMATION_SCHEMA' is
                                                             often slow, but the
                                                             information obtained is more
                                                             complete. Added in 5.1.7.
`INTERACTIVE'                 Interactive Client -           Makes the client interactive
                                                             and uses
                                                             `interactive_timeout'
                                                             instead of `wait_timeout'.
                                                             Added in 5.1.7.
`CAN_HANDLE_EXP_PWD'          Can Handle         -           Enables handling of expired
                              Expired Password               password. Added in 5.2.4.
`ENABLE_CLEARTEXT_PLUGIN'     Enable Cleartext   -           Enables cleartext
                              Authentication                 authentication. Added in
                                                             5.1.13 and 5.2.5.
`NO_SSPS'                     Prepare            -           Prepares statements on the
                              statements on the              client instead of the
                              client                         server. Added in 5.2.0.
`PREFETCH'                    Prefecth from      -           Specifies the number of rows
                              server by N rows               (N) to prefetch from the
                              at a time                      server for queries without
                                                             `LIMIT'. It turns, for
                                                             example, `SELECT * FROM
                                                             table' into `SELECT * FROM
                                                             table LIMIT 0, N'. If the
                                                             client wants to read more
                                                             rows than specified in the
                                                             PREFETCH parameter, the
                                                             driver runs another query
                                                             `SELECT * FROM table LIMIT
                                                             N+1, N*2'. Added in 5.1.11.

*Note codbc-dsn-option-combos:: shows some recommended parameter
settings and their corresponding `option' values for various
configurations:

*Recommended Connector/ODBC Option Values for Different Configurations*

Configuration  Parameter      Option
               Settings       Value
Microsoft      FOUND_ROWS=1;  2
Access,                       
Visual Basic                  
Microsoft      FOUND_ROWS=1;DYNAMIC_CURSOR=1;34
Access (with                  
improved                      
DELETE                        
queries)                      
Microsoft SQL  COLUMN_SIZE_S32=1;134217728
Server                        
Large tables   COMPRESSED_PROTO=1;2048
with too many                 
rows                          
Sybase         IGNORE_SPACE=1;FLAG_SAFE=1;135168
PowerBuilder                  
Query log      LOG_QUERY=1;   524288
generation                    
(Debug mode)                  
Large tables   NO_CACHE=1;FORWARD_CURSOR=1;3145728
with no-cache                 
results                       
Applications   PREFETCH=N     Not
that run                      Applicable
full-table                    
"SELECT *                     
FROM ... "                    
query, but                    
read only a                   
small number                  
(N) of rows                   
from the                      
result                        


File: manual.info,  Node: connector-odbc-configuration-dsn-windows,  Next: connector-odbc-configuration-dsn-macosx,  Prev: connector-odbc-configuration-connection-parameters,  Up: connector-odbc-configuration

22.1.4.3 Configuring a Connector/ODBC DSN on Windows
....................................................

* Menu:

* connector-odbc-configuration-dsn-windows-5-2::  Configuring a Connector/ODBC 5.x DSN on Windows
* connector-odbc-configuration-dsn-windows-5-2-command-line::  Configuring a Connector/ODBC 5.x DSN on Windows, Using the Command Line
* connector-odbc-configuration-dsn-windows-problems::  Troubleshooting ODBC Connection Problems

The `ODBC Data Source Administrator' within Windows lets you create
DSNs, check driver installation and configure ODBC systems such as
tracing (used for debugging) and connection pooling.

Different editions and versions of Windows store the `ODBC Data Source
Administrator' in different locations depending on the version of
Windows that you are using.

To open the `ODBC Data Source Administrator' in Windows Server 2003:

*Tip*:

To identify whether a DSN was created using the 32-bit or the 64-bit
driver, include the driver being used within the DSN identifier. This
will help you to identify the right DSN to use with applications such
as Excel that are only compatible with the 32-bit driver. For example,
you might add `Using32bitCODBC' to the DSN identifier for the 32-bit
interface and `Using64bitCODBC' for those using the 64-bit
Connector/ODBC driver.

  1. On the `Start' menu, choose `Administrative Tools', and then click
     `Data Sources (ODBC)'.

To open the `ODBC Data Source Administrator' in Windows 2000 Server or
Windows 2000 Professional:

  1. On the `Start' menu, choose `Settings', and then click `Control
     Panel'.

  2. In `Control Panel', click `Administrative Tools'.

  3. In `Administrative Tools', click `Data Sources (ODBC)'.

To open the `ODBC Data Source Administrator' on Windows XP:

  1. On the `Start' menu, click `Control Panel'.

  2. In the `Control Panel' when in `Category View' click `Performance
     and Maintenance' and then click `Administrative Tools.'. If you
     are viewing the `Control Panel' in `Classic View', click
     `Administrative Tools'.

  3. In `Administrative Tools', click `Data Sources (ODBC)'.

Irrespective of your Windows version, you should be presented the `ODBC
Data Source Administrator' window:

`ODBC Data Source Administrator' Dialog

Within Windows XP, you can add the `Administrative Tools' folder to
your `Start' menu to make it easier to locate the ODBC Data Source
Administrator.  To do this:

  1. Right-click the `Start' menu.

  2. Select `Properties'.

  3. Click `Customize...'.

  4. Select the `Advanced' tab.

  5. Within `Start menu items', within the `System Administrative
     Tools' section, select `Display on the All Programs menu'.

Within both Windows Server 2003 and Windows XP, consider permanently
adding the `ODBC Data Source Administrator' to your `Start' menu. To do
this, locate the `Data Sources (ODBC)' icon using the methods shown,
then right-click on the icon and then choose `Pin to Start Menu'.

The interfaces for the 3.51 and 5.x versions of the Connector/ODBC
driver are different, although the fields and information that you need
to enter remain the same.

To configure a DSN using Connector/ODBC 5.2, see *Note
connector-odbc-configuration-dsn-windows-5-2::.


File: manual.info,  Node: connector-odbc-configuration-dsn-windows-5-2,  Next: connector-odbc-configuration-dsn-windows-5-2-command-line,  Prev: connector-odbc-configuration-dsn-windows,  Up: connector-odbc-configuration-dsn-windows

22.1.4.4 Configuring a Connector/ODBC 5.x DSN on Windows
........................................................

Due to the native Unicode support within Connector/ODBC, you do not
need to specify the initial character set to be used with your
connection.

To add or configure a Connector/ODBC 5.x DSN on Windows, use either the
command-line, or the `ODBC Data Source Administrator' GUI.

  1. Open the `ODBC Data Source Administrator'.

  2. To create a System DSN (which will be available to all users),
     select the `System DSN' tab. To create a User DSN, which will be
     unique only to the current user, click the `Add...' button.

  3. Select the ODBC driver for this DSN.

     `MySQL ODBC Driver Selection' Dialog

     Select `MySQL ODBC 5.X Driver' for the appropriate level of
     Connector/ODBC, then click `Finish'.

  4. You now need to configure the specific fields for the DSN you are
     creating through the `Connection Parameters' dialog.

     `Add Data Source Name' Dialog for Connector/ODBC 5.2

     In the `Data Source Name' box, enter the name of the data source
     to access. It can be any valid name that you choose.

  5. In the `Description' box, enter some text to help identify the
     connection.

  6. In the `Server' field, enter the name of the MySQL server host to
     access. By default, it is `localhost'.

  7. In the `User' field, enter the user name to use for this
     connection.

  8. In the `Password' field, enter the corresponding password for this
     connection.

  9. The `Database' pop-up should automatically populate with the list
     of databases that the user has permissions to access.

 10. To communicate over a different TCP/IP port than the default
     (3306), change the value of the `Port'.

 11. Click `OK' to save the DSN.

To verify the connection using the parameters you have entered, click
the `Test' button. If the connection could be made successfully, you
will be notified with a `Success; connection was made!' dialog.

You can configure a number of options for a specific DSN by using the
`Details' button.

Connector/ODBC Connect Options Dialog

The `Details' button opens a tabbed display where you set additional
options:

   * `Flags 1', `Flags 2', and `Flags 3' enable you to select the
     additional flags for the DSN connection. For more information on
     these flags, see *Note
     connector-odbc-configuration-connection-parameters::.

   * `Debug' lets you turn on ODBC debugging to record the queries you
     execute through the DSN to the `myodbc.sql' file. For more
     information, see *Note connector-odbc-configuration-trace::.

   * `SSL Settings' configures the additional options required for
     using the Secure Sockets Layer (SSL) when communicating with MySQL
     server. Note that you must also enable SSL and configure the MySQL
     server with suitable certificates to communicate over SSL.

     Connector/ODBC 5.2 SSL Configuration

The `Advanced' tab lets you configure Connector/ODBC connection
parameters. Refer to *Note
connector-odbc-configuration-connection-parameters::, for information
about the meaning of these options.


File: manual.info,  Node: connector-odbc-configuration-dsn-windows-5-2-command-line,  Next: connector-odbc-configuration-dsn-windows-problems,  Prev: connector-odbc-configuration-dsn-windows-5-2,  Up: connector-odbc-configuration-dsn-windows

22.1.4.5 Configuring a Connector/ODBC 5.x DSN on Windows, Using the Command Line
................................................................................

Use `myodbc-installer.exe' when configuring Connector/ODBC 5.1 or later
from the command-line.

Execute `myodbc-installer.exe' without arguments to view a list of
available options.


File: manual.info,  Node: connector-odbc-configuration-dsn-windows-problems,  Prev: connector-odbc-configuration-dsn-windows-5-2-command-line,  Up: connector-odbc-configuration-dsn-windows

22.1.4.6 Troubleshooting ODBC Connection Problems
.................................................

This section answers Connector/ODBC connection-related questions.

   * *While configuring a Connector/ODBC DSN, a `Could Not Load
     Translator or Setup Library' error occurs*

     For more information, refer to MS KnowledgeBase Article(Q260558)
     (http://support.microsoft.com/default.aspx?scid=kb;EN-US;q260558).
     Also, make sure you have the latest valid `ctl3d32.dll' in your
     system directory.

   * On Windows, the default `myodbc5w.dll' (Unicode) or `myodbc5a.dll'
     (ANSI) is compiled for optimal performance. To debug Connector/ODBC
     (for example, to enable tracing), instead use `myodbc5d.dll'. To
     install this file, copy `myodbc5d.dll' over the installed
     `myodbc5w.dll' or `myodbc5a.dll' file. Make sure to revert back to
     the release version of the driver DLL once you are done with the
     debugging, because the debug version may cause performance issues.


File: manual.info,  Node: connector-odbc-configuration-dsn-macosx,  Next: connector-odbc-configuration-dsn-unix,  Prev: connector-odbc-configuration-dsn-windows,  Up: connector-odbc-configuration

22.1.4.7 Configuring a Connector/ODBC DSN on Mac OS X
.....................................................

To configure a DSN on Mac OS X, you can either use the command-line
utility (`myodbc-installer'), edit the `odbc.ini' file within the
`Library/ODBC' directory of the user, or use the ODBC Administrator
GUI. If you have Mac OS X 10.2 or earlier, refer to *Note
connector-odbc-configuration-dsn-unix::. Select whether to create a
User DSN or a System DSN. When adding a System DSN, you might need to
authenticate with the system.  Click the padlock and enter a user and
password with administrator privileges.

For correct operation of ODBC Administrator, ensure that the
`/Library/ODBC/odbc.ini' file used to set up ODBC connectivity and DSNs
are writable by the `admin' group. If this file is not writable by this
group, then the ODBC Administrator may fail, or may appear to work but
not generate the correct entry.

*Warning*:

There are known issues with the Mac OS X ODBC Administrator and
Connector/ODBC that may prevent you from creating a DSN using this
method. In this case, use the command line or edit the `odbc.ini' file
directly. Note that existing DSNs or those that you created using the
`myodbc-installer' tool can still be checked and edited using ODBC
Administrator.

To create a DSN using the `myodbc-installer' utility, you need only
specify the DSN type and the DSN connection string. For example:

     shell> myodbc-installer -a -s -t"DSN=mydb;DRIVER=MySQL ODBC 5.2 Driver;SERVER=mysql;USER=username;PASSWORD=pass"

To use ODBC Administrator:

  1. Open the ODBC Administrator from the `Utilities' folder in the
     `Applications' folder.

     `ODBC Administrator Main Panel' Dialog

  2. On the User DSN or System DSN panel, click `Add'.

  3. Select the Connector/ODBC driver and click `OK'.

  4. You will be presented with the `Data Source Name' dialog. Enter
     the `Data Source Name' and an optional `Description' for the DSN.

     `ODBC Administrator Add DSN' Dialog

  5. Click `Add' to add a new keyword/value pair to the panel.
     Configure at least four pairs to specify the `server', `username',
     `password' and `database' connection parameters. See *Note
     connector-odbc-configuration-connection-parameters::.

  6. Click `OK' to add the DSN to the list of configured data source
     names.

A completed DSN configuration may look like this:

`ODBC Administrator Sample DSN' Dialog

You can configure other ODBC options in your DSN by adding further
keyword/value pairs and setting the corresponding values. See *Note
connector-odbc-configuration-connection-parameters::.


File: manual.info,  Node: connector-odbc-configuration-dsn-unix,  Next: connector-odbc-configuration-connection-without-dsn,  Prev: connector-odbc-configuration-dsn-macosx,  Up: connector-odbc-configuration

22.1.4.8 Configuring a Connector/ODBC DSN on Unix
.................................................

On `Unix', you configure DSN entries directly in the `odbc.ini' file.
Here is a typical `odbc.ini' file that configures `myodbc3' as the DSN
name for Connector/ODBC 3.51:

     ;
     ;  odbc.ini configuration for Connector/ODBC and Connector/ODBC 3.51 drivers
     ;

     [ODBC Data Sources]
     myodbc3     = MyODBC 3.51 Driver DSN

     [myodbc3]
     Driver       = /usr/local/lib/libmyodbc3.so
     Description  = Connector/ODBC 3.51 Driver DSN
     SERVER       = localhost
     PORT         =
     USER         = root
     Password     =
     Database     = test
     OPTION       = 3
     SOCKET       =

     [Default]
     Driver       = /usr/local/lib/libmyodbc3.so
     Description  = Connector/ODBC 3.51 Driver DSN
     SERVER       = localhost
     PORT         =
     USER         = root
     Password     =
     Database     = test
     OPTION       = 3
     SOCKET       =

Refer to the *Note connector-odbc-configuration-connection-parameters::,
for the list of connection parameters that can be supplied.

*Note*:

If you are using `unixODBC', you can use the following tools to set up
the DSN:

   * `ODBCConfig' GUI tool (HOWTO: ODBCConfig
     (http://www.unixodbc.org/config.html))

   * `odbcinst'

In some cases when using `unixODBC', you might get this error:

     Data source name not found and no default driver specified

If this happens, make sure the `ODBCINI' and `ODBCSYSINI' environment
variables are pointing to the right `odbc.ini' file. For example, if
your `odbc.ini' file is located in `/usr/local/etc', set the environment
variables like this:

     export ODBCINI=/usr/local/etc/odbc.ini
     export ODBCSYSINI=/usr/local/etc


File: manual.info,  Node: connector-odbc-configuration-connection-without-dsn,  Next: connector-odbc-configuration-connection-pooling,  Prev: connector-odbc-configuration-dsn-unix,  Up: connector-odbc-configuration

22.1.4.9 Connecting Without a Predefined DSN
............................................

You can connect to the MySQL server using `SQLDriverConnect', by
specifying the `DRIVER' name field. Here are the connection strings for
Connector/ODBC using DSN-Less connections:

* For Connector/ODBC 3.51: *

     ConnectionString = "DRIVER={MySQL ODBC 3.51 Driver};\
                        SERVER=localhost;\
                        DATABASE=test;\
                        USER=venu;\
                        PASSWORD=venu;\
                        OPTION=3;"

If your programming language converts backslash followed by whitespace
to a space, it is preferable to specify the connection string as a
single long string, or to use a concatenation of multiple strings that
does not add spaces in between. For example:

     ConnectionString = "DRIVER={MySQL ODBC 3.51 Driver};"
                        "SERVER=localhost;"
                        "DATABASE=test;"
                        "USER=venu;"
                        "PASSWORD=venu;"
                        "OPTION=3;"

Note

On Mac OS X, you might need to specify the full path to the
Connector/ODBC driver library.

Refer to *Note connector-odbc-configuration-connection-parameters:: for
the list of connection parameters that can be supplied.


File: manual.info,  Node: connector-odbc-configuration-connection-pooling,  Next: connector-odbc-configuration-trace,  Prev: connector-odbc-configuration-connection-without-dsn,  Up: connector-odbc-configuration

22.1.4.10 ODBC Connection Pooling
.................................

Connection pooling enables the ODBC driver to re-use existing
connections to a given database from a pool of connections, instead of
opening a new connection each time the database is accessed. By
enabling connection pooling you can improve the overall performance of
your application by lowering the time taken to open a connection to a
database in the connection pool.

For more information about connection pooling:
`http://support.microsoft.com/default.aspx?scid=kb;EN-US;q169470'.


File: manual.info,  Node: connector-odbc-configuration-trace,  Prev: connector-odbc-configuration-connection-pooling,  Up: connector-odbc-configuration

22.1.4.11 Getting an ODBC Trace File
....................................

* Menu:

* connector-odbc-configuration-trace-windows::  Enabling ODBC Tracing on Windows
* connector-odbc-configuration-trace-macosx::  Enabling ODBC Tracing on Mac OS X
* connector-odbc-configuration-trace-unix::  Enabling ODBC Tracing on Unix
* connector-odbc-configuration-trace-log::  Enabling a Connector/ODBC Log

If you encounter difficulties or problems with Connector/ODBC, start by
making a log file from the `ODBC Manager' and Connector/ODBC. This is
called _tracing_, and is enabled through the ODBC Manager. The
procedure for this differs for Windows, Mac OS X and Unix.


File: manual.info,  Node: connector-odbc-configuration-trace-windows,  Next: connector-odbc-configuration-trace-macosx,  Prev: connector-odbc-configuration-trace,  Up: connector-odbc-configuration-trace

22.1.4.12 Enabling ODBC Tracing on Windows
..........................................

To enable the trace option on Windows:

  1. The `Tracing' tab of the ODBC Data Source Administrator dialog box
     lets you configure the way ODBC function calls are traced.

     ODBC Data Source Administrator Tracing Dialog

  2. When you activate tracing from the `Tracing' tab, the `Driver
     Manager' logs all ODBC function calls for all subsequently run
     applications.

  3. ODBC function calls from applications running before tracing is
     activated are not logged. ODBC function calls are recorded in a
     log file you specify.

  4. Tracing ceases only after you click `Stop Tracing Now'. Remember
     that while tracing is on, the log file continues to increase in
     size and that tracing affects the performance of all your ODBC
     applications.


File: manual.info,  Node: connector-odbc-configuration-trace-macosx,  Next: connector-odbc-configuration-trace-unix,  Prev: connector-odbc-configuration-trace-windows,  Up: connector-odbc-configuration-trace

22.1.4.13 Enabling ODBC Tracing on Mac OS X
...........................................

To enable the trace option on Mac OS X 10.3 or later, use the `Tracing'
tab within ODBC Administrator .

  1. Open the ODBC Administrator.

  2. Select the `Tracing' tab.

     ODBC Administrator Tracing Dialog

  3. Select the `Enable Tracing' check box.

  4. Enter the location to save the Tracing log. To append information
     to an existing log file, click the `Choose...' button.


File: manual.info,  Node: connector-odbc-configuration-trace-unix,  Next: connector-odbc-configuration-trace-log,  Prev: connector-odbc-configuration-trace-macosx,  Up: connector-odbc-configuration-trace

22.1.4.14 Enabling ODBC Tracing on Unix
.......................................

To enable the trace option on Mac OS X 10.2 (or earlier) or Unix, add
the `trace' option to the ODBC configuration:

  1. On Unix, explicitly set the `Trace' option in the `ODBC.INI' file.

     Set the tracing `ON' or `OFF' by using `TraceFile' and `Trace'
     parameters in `odbc.ini' as shown below:

          TraceFile  = /tmp/odbc.trace
          Trace      = 1

     `TraceFile' specifies the name and full path of the trace file and
     `Trace' is set to `ON' or `OFF'. You can also use `1' or `YES' for
     `ON' and `0' or `NO' for `OFF'. If you are using `ODBCConfig' from
     `unixODBC', then follow the instructions for tracing `unixODBC'
     calls at HOWTO-ODBCConfig (http://www.unixodbc.org/config.html).


File: manual.info,  Node: connector-odbc-configuration-trace-log,  Prev: connector-odbc-configuration-trace-unix,  Up: connector-odbc-configuration-trace

22.1.4.15 Enabling a Connector/ODBC Log
.......................................

To generate a Connector/ODBC log, do the following:

  1. Within Windows, enable the `Trace Connector/ODBC' option flag in
     the Connector/ODBC connect/configure screen. The log is written to
     file `C:\myodbc.log'. If the trace option is not remembered when
     you are going back to the above screen, it means that you are not
     using the `myodbcd.dll' driver, see *Note
     connector-odbc-configuration-dsn-windows-problems::.

     On Mac OS X, Unix, or if you are using a DSN-less connection,
     either supply `OPTION=4' in the connection string, or set the
     corresponding keyword/value pair in the DSN.

  2. Start your application and try to get it to fail. Then check the
     Connector/ODBC trace file to find out what could be wrong.

If you need help determining what is wrong, see *Note
connector-odbc-support-community::.


File: manual.info,  Node: connector-odbc-examples,  Next: connector-odbc-reference,  Prev: connector-odbc-configuration,  Up: connector-odbc

22.1.5 Connector/ODBC Examples
------------------------------

* Menu:

* connector-odbc-examples-overview::  Basic Connector/ODBC Application Steps
* connector-odbc-examples-walkthrough::  Step-by-step Guide to Connecting to a MySQL Database through Connector/ODBC
* connector-odbc-examples-tools::  Connector/ODBC and Third-Party ODBC Tools
* connector-odbc-examples-tools-with-access::  Using Connector/ODBC with Microsoft Access
* connector-odbc-examples-tools-with-wordexcel::  Using Connector/ODBC with Microsoft Word or Excel
* connector-odbc-examples-tools-with-crystalreports::  Using Connector/ODBC with Crystal Reports
* connector-odbc-examples-programming::  Connector/ODBC Programming

Once you have configured a DSN to provide access to a database, how you
access and use that connection is dependent on the application or
programming language. As ODBC is a standardized interface, any
application or language that supports ODBC can use the DSN and connect
to the configured database.


File: manual.info,  Node: connector-odbc-examples-overview,  Next: connector-odbc-examples-walkthrough,  Prev: connector-odbc-examples,  Up: connector-odbc-examples

22.1.5.1 Basic Connector/ODBC Application Steps
...............................................

Interacting with a MySQL server from an applications using the
Connector/ODBC typically involves the following operations:

   * Configure the Connector/ODBC DSN.

   * Connect to MySQL server.

   * Initialization operations.

   * Execute SQL statements.

   * Retrieve results.

   * Perform transactions.

   * Disconnect from the server.

Most applications use some variation of these steps. The basic
application steps are shown in the following diagram:

Connector/ODBC Programming Flowchart


File: manual.info,  Node: connector-odbc-examples-walkthrough,  Next: connector-odbc-examples-tools,  Prev: connector-odbc-examples-overview,  Up: connector-odbc-examples

22.1.5.2 Step-by-step Guide to Connecting to a MySQL Database through Connector/ODBC
....................................................................................

A typical situation where you would install Connector/ODBC is to access
a database on a Linux or Unix host from a Windows machine.

As an example of the process required to set up access between two
machines, the steps below take you through the basic steps.  These
instructions assume that you connect to system ALPHA from system BETA
with a user name and password of `myuser' and `mypassword'.

On system ALPHA (the MySQL server) follow these steps:

  1. Start the MySQL server.

  2. Use *Note `GRANT': grant. to set up an account with a user name of
     `myuser' that can connect from system BETA using a password of
     `myuser' to the database `test':

          GRANT ALL ON test.* to 'myuser'@'BETA' IDENTIFIED BY 'mypassword';

     For more information about MySQL privileges, refer to *Note
     user-account-management::.

On system BETA (the Connector/ODBC client), follow these steps:

  1. Configure a Connector/ODBC DSN using parameters that match the
     server, database and authentication information that you have just
     configured on system ALPHA.

     Sample configuration settings for connecting to database on server
     ALPHA from Connector/ODBC running on server BETA.

     Parameter  Value         Comment
     DSN        remote_test   A name to identify the connection.
     SERVER     ALPHA         The address of the remote server.
     DATABASE   test          The name of the default database.
     USER       myuser        The user name configured for access to this
                              database.
     PASSWORD   mypassword    The password for `myuser'.

  2. Using an ODBC-capable application, such as Microsoft Office,
     connect to the MySQL server using the DSN you have just created.
     If the connection fails, use tracing to examine the connection
     process. See *Note connector-odbc-configuration-trace::, for more
     information.


File: manual.info,  Node: connector-odbc-examples-tools,  Next: connector-odbc-examples-tools-with-access,  Prev: connector-odbc-examples-walkthrough,  Up: connector-odbc-examples

22.1.5.3 Connector/ODBC and Third-Party ODBC Tools
..................................................

Once you have configured your Connector/ODBC DSN, you can access your
MySQL database through any application that supports the ODBC
interface, including programming languages and third-party
applications. This section contains guides and help on using
Connector/ODBC with various ODBC-compatible tools and applications,
including Microsoft Word, Microsoft Excel and Adobe/Macromedia
ColdFusion.

Connector/ODBC has been tested with the following applications:

List of applications that Connector/ODBC has been tested with.

Publisher          Application        Notes
Adobe              ColdFusion         Formerly Macromedia ColdFusion
Borland            C++ Builder        
                   Builder 4          
                   Delphi             
Business Objects   Crystal Reports    
Claris             Filemaker Pro      
Corel              Paradox            
Computer           Visual Objects     Also known as CAVO
Associates                            
                   AllFusion ERwin    
                   Data Modeler       
Gupta              Team Developer     Previously known as Centura Team
                                      Developer; Gupta SQL/Windows
Gensym             G2-ODBC Bridge     
Inline             iHTML              
Lotus              Notes              Versions 4.5 and 4.6
Microsoft          Access             
                   Excel              
                   Visio Enterprise   
                   Visual C++         
                   Visual Basic       
                   ODBC.NET           Using C#, Visual Basic, C++
                   FoxPro             
                   Visual Interdev    
OpenOffice.org     OpenOffice.org     
Perl               DBD::ODBC          
Pervasive Software DataJunction       
Sambar             Sambar Server      
Technologies                          
SPSS               SPSS               
SoftVelocity       Clarion            
SQLExpress         SQLExpress for     
                   Xbase++            
Sun                StarOffice         
SunSystems         Vision             
Sybase             PowerBuilder       
                   PowerDesigner      
theKompany.com     Data Architect     

If you know of any other applications that work with Connector/ODBC,
please send mail to <myodbc@lists.mysql.com> about them.


File: manual.info,  Node: connector-odbc-examples-tools-with-access,  Next: connector-odbc-examples-tools-with-wordexcel,  Prev: connector-odbc-examples-tools,  Up: connector-odbc-examples

22.1.5.4 Using Connector/ODBC with Microsoft Access
...................................................

* Menu:

* connector-odbc-examples-tools-with-access-export::  Exporting Access Data to MySQL
* connector-odbc-examples-tools-with-access-import::  Importing MySQL Data to Access
* connector-odbc-examples-tools-with-access-linked-tables::  Using Microsoft Access as a Front-end to MySQL

You can use MySQL database with Microsoft Access using Connector/ODBC.
The MySQL database can be used as an import source, an export source,
or as a linked table for direct use within an Access application, so
you can use Access as the front-end interface to a MySQL database.


File: manual.info,  Node: connector-odbc-examples-tools-with-access-export,  Next: connector-odbc-examples-tools-with-access-import,  Prev: connector-odbc-examples-tools-with-access,  Up: connector-odbc-examples-tools-with-access

22.1.5.5 Exporting Access Data to MySQL
.......................................

To export a table of data from an Access database to MySQL, follow
these instructions:

  1. When you open an Access database or an Access project, a Database
     window appears. It displays shortcuts for creating new database
     objects and opening existing objects.

     Access Database

  2. Click the name of the `table' or `query' to export, and then in the
     `File' menu, select `Export'.

  3. In the `Export Object Type OBJECT NAME To' dialog box, in the
     `Save As Type' box, select `ODBC Databases ()' as shown here:

     Selecting an ODBC Database

  4. In the `Export' dialog box, enter a name for the file (or use the
     suggested name), and then select `OK'.

  5. The Select Data Source dialog box is displayed; it lists the
     defined data sources for any ODBC drivers installed on your
     computer. Click either the File Data Source or Machine Data Source
     tab, and then double-click the Connector/ODBC or Connector/ODBC
     3.51 data source to export to. To define a new data source for
     Connector/ODBC, please *Note
     connector-odbc-configuration-dsn-windows::.

*Note*:

Ensure that the information that you are exporting to the MySQL table
is valid for the corresponding MySQL data types.  Values that are
outside of the supported range of the MySQL data type but valid within
Access may trigger an `overflow' error during the export.

Microsoft Access connects to the MySQL Server through this data source
and exports new tables and or data.


File: manual.info,  Node: connector-odbc-examples-tools-with-access-import,  Next: connector-odbc-examples-tools-with-access-linked-tables,  Prev: connector-odbc-examples-tools-with-access-export,  Up: connector-odbc-examples-tools-with-access

22.1.5.6 Importing MySQL Data to Access
.......................................

To import a table or tables from MySQL to Access, follow these
instructions:

  1. Open a database, or switch to the Database window for the open
     database.

  2. To import tables, on the `File' menu, point to `Get External
     Data', and then click `Import'.

  3. In the `Import' dialog box, in the Files Of Type box, select `ODBC
     Databases ()'. The Select Data Source dialog box lists the defined
     data sources `The Select Data Source' dialog box is displayed; it
     lists the defined data source names.

  4. If the ODBC data source that you selected requires you to log on,
     enter your login ID and password (additional information might
     also be required), and then click `OK'.

  5. Microsoft Access connects to the MySQL server through `ODBC data
     source ' and displays the list of tables that you can `import'.

  6. Click each table to `import', and then click `OK'.


File: manual.info,  Node: connector-odbc-examples-tools-with-access-linked-tables,  Prev: connector-odbc-examples-tools-with-access-import,  Up: connector-odbc-examples-tools-with-access

22.1.5.7 Using Microsoft Access as a Front-end to MySQL
.......................................................

You can use Microsoft Access as a front end to a MySQL database by
linking tables within your Microsoft Access database to tables that
exist within your MySQL database. When a query is requested on a table
within Access, ODBC is used to execute the queries on the MySQL
database instead.

*To create a linked table*:

  1. Open the Access database that you want to link to MySQL.

  2. From the `File', choose `Get External Data->Link Tables'.

     Linking Microsoft Access tables to MySQL tables

  3. From the browser, choose `ODBC Databases ()' from the `Files of
     type' pop-up.

  4. In the `Select Data Source' window, choose an existing DSN, either
     from a `File Data Source' or `Machine Data Source'.You can also
     create a new DSN using the `New...' button. For more information
     on creating a DSN see *Note
     connector-odbc-configuration-dsn-windows::.

     Linking Microsoft Access tables to MySQL tables, choosing a DSN

  5. In the `Link Tables' dialog, select one or more tables from the
     MySQL database. A link will be created to each table that you
     select from this list.

     Linking Microsoft Access tables to MySQL tables, table selection

  6. If Microsoft Access is unable to determine the unique record
     identifier for a table automatically then it may ask you to
     confirm the column, or combination of columns, to be used to
     uniquely identify each row from the source table. Select the
     columns to use and click `OK'.

     Linking Microsoft Access tables to MySQL tables, choosing unique
     record identifier

Once the process has been completed, you can now build interfaces and
queries to the linked tables just as you would for any Access database.

Use the following procedure to view or to refresh links when the
structure or location of a linked table has changed. The Linked Table
Manager lists the paths to all currently linked tables.

*To view or refresh links*:

  1. Open the database that contains links to MySQL tables.

  2. On the `Tools' menu, point to `Add-ins' (`Database Utilities' in
     Access 2000 or newer), and then click `Linked Table Manager'.

  3. Select the check box for the tables whose links you want to
     refresh.

  4. Click OK to refresh the links.

Microsoft Access confirms a successful refresh or, if the table wasn't
found, displays the `Select New Location of' <table name> dialog box in
which you can specify its the table's new location. If several selected
tables have moved to the new location that you specify, the Linked
Table Manager searches that location for all selected tables, and
updates all links in one step.

*To change the path for a set of linked tables*:

  1. Open the database that contains links to tables.

  2. On the `Tools' menu, point to `Add-ins' (`Database Utilities' in
     Access 2000 or newer), and then click `Linked Table Manager'.

  3. Select the `Always Prompt For A New Location' check box.

  4. Select the check box for the tables whose links you want to
     change, and then click `OK'.

  5. In the `Select New Location of' <table name> dialog box, specify
     the new location, click `Open', and then click `OK'.


File: manual.info,  Node: connector-odbc-examples-tools-with-wordexcel,  Next: connector-odbc-examples-tools-with-crystalreports,  Prev: connector-odbc-examples-tools-with-access,  Up: connector-odbc-examples

22.1.5.8 Using Connector/ODBC with Microsoft Word or Excel
..........................................................

You can use Microsoft Word and Microsoft Excel to access information
from a MySQL database using Connector/ODBC. Within Microsoft Word, this
facility is most useful when importing data for mailmerge, or for
tables and data to be included in reports.  Within Microsoft Excel, you
can execute queries on your MySQL server and import the data directly
into an Excel Worksheet, presenting the data as a series of rows and
columns.

With both applications, data is accessed and imported into the
application using Microsoft Query, which lets you execute a query
though an ODBC source. You use Microsoft Query to build the SQL
statement to be executed, selecting the tables, fields, selection
criteria and sort order.  For example, to insert information from a
table in the World test database into an Excel spreadsheet, using the
DSN samples shown in *Note connector-odbc-configuration:::

  1. Create a new Worksheet.

  2. From the `Data' menu, choose `Import External Data', and then
     select `New Database Query'.

  3. Microsoft Query will start.  First, you need to choose the data
     source, by selecting an existing Data Source Name.

     Microsoft Query, Choose Data Source

  4. Within the `Query Wizard', choose the columns to import. The list
     of tables available to the user configured through the DSN is
     shown on the left, the columns that will be added to your query
     are shown on the right. The columns you choose are equivalent to
     those in the first section of a *Note `SELECT': select. query.
     Click `Next' to continue.

     Microsoft Query, Choose Columns

  5. You can filter rows from the query (the equivalent of a `WHERE'
     clause) using the `Filter Data' dialog. Click `Next' to continue.

     Microsoft Query, Filter Data

  6. Select an (optional) sort order for the data. This is equivalent
     to using a `ORDER BY' clause in your SQL query. You can select up
     to three fields for sorting the information returned by the query.
     Click `Next' to continue.

     Microsoft Query, Sort Order

  7. Select the destination for your query. You can select to return
     the data Microsoft Excel, where you can choose a worksheet and
     cell where the data will be inserted; you can continue to view the
     query and results within Microsoft Query, where you can edit the
     SQL query and further filter and sort the information returned; or
     you can create an OLAP Cube from the query, which can then be used
     directly within Microsoft Excel. Click `Finish'.

     Microsoft Query, Selecting a destination

The same process can be used to import data into a Word document, where
the data will be inserted as a table. This can be used for mail merge
purposes (where the field data is read from a Word table), or where you
want to include data and reports within a report or other document.


File: manual.info,  Node: connector-odbc-examples-tools-with-crystalreports,  Next: connector-odbc-examples-programming,  Prev: connector-odbc-examples-tools-with-wordexcel,  Up: connector-odbc-examples

22.1.5.9 Using Connector/ODBC with Crystal Reports
..................................................

Crystal Reports can use an ODBC DSN to connect to a database from which
you to extract data and information for reporting purposes.

*Note*:

There is a known issue with certain versions of Crystal Reports where
the application is unable to open and browse tables and fields through
an ODBC connection. Before using Crystal Reports with MySQL, please
ensure that you have update to the latest version, including any
outstanding service packs and hotfixes. For more information on this
issue, see the Business) Objects Knowledgebase
(http://support.crystaldecisions.com/library/kbase/new_articles/c2013269.asp)
for more information.

For example, to create a simple crosstab report within Crystal Reports
XI, follow these steps:

  1. Create a DSN using the `Data Sources (ODBC)' tool. You can either
     specify a complete database, including user name and password, or
     you can build a basic DSN and use Crystal Reports to set the user
     name and password.

     For the purposes of this example, a DSN that provides a connection
     to an instance of the MySQL Sakila sample database has been
     created.

  2. Open Crystal Reports and create a new project, or an open an
     existing reporting project into which you want to insert data from
     your MySQL data source.

  3. Start the Cross-Tab Report Wizard, either by clicking the option
     on the Start Page. Expand the `Create New Connection' folder, then
     expand the `ODBC (RDO)' folder to obtain a list of ODBC data
     sources.

     You will be asked to select a data source.

     Selecting an Data Source in Crystal Reports

  4. When you first expand the `ODBC (RDO)' folder you will be
     presented the Data Source Selection screen. From here you can
     select either a pre-configured DSN, open a file-based DSN or enter
     and manual connection string. For this example, the `Sakila' DSN
     will be used.

     If the DSN contains a user name/password combination, or you want
     to use different authentication credentials, click `Next' to enter
     the user name and password that you want to use. Otherwise, click
     `Finish' to continue the data source selection wizard.

     Selecting an ODBC Data Source in Crystal Reports

  5. You will be returned the Cross-Tab Report Creation Wizard.  You
     now need to select the database and tables that you want to
     include in your report. For our example, we will expand the
     selected Sakila database. Click the `city' table and use the `>'
     button to add the table to the report. Then repeat the action with
     the `country' table. Alternatively you can select multiple tables
     and add them to the report.

     Finally, you can select the parent `Sakila' resource and add of
     the tables to the report.

     Once you have selected the tables you want to include, click
     `Next' to continue.

     Selecting an tables in Crystal Reports

  6. Crystal Reports will now read the table definitions and
     automatically identify the links between the tables. The
     identification of links between tables enables Crystal Reports to
     automatically lookup and summarize information based on all the
     tables in the database according to your query. If Crystal Reports
     is unable to perform the linking itself, you can manually create
     the links between fields in the tables you have selected.

     Click `Next' to continue the process.

     Table links/structure in Crystal Reports

  7. You can now select the columns and rows that to include within the
     Cross-Tab report. Drag and drop or use the `>' buttons to add
     fields to each area of the report. In the example shown, we will
     report on cities, organized by country, incorporating a count of
     the number of cities within each country. If you want to browse
     the data, select a field and click the `Browse Data...' button.

     Click `Next' to create a graph of the results. Since we are not
     creating a graph from this data, click `Finish' to generate the
     report.

     Cross-tab definition in Crystal Reports

  8. The finished report will be shown, a sample of the output from the
     Sakila sample database is shown below.

     Cross-tab final report in Crystal Reports

Once the ODBC connection has been opened within Crystal Reports, you
can browse and add any fields within the available tables into your
reports.


File: manual.info,  Node: connector-odbc-examples-programming,  Prev: connector-odbc-examples-tools-with-crystalreports,  Up: connector-odbc-examples

22.1.5.10 Connector/ODBC Programming
....................................

* Menu:

* connector-odbc-examples-programming-vb::  Using Connector/ODBC with Visual Basic Using ADO, DAO and RDO
* connector-odbc-examples-programming-net::  Using Connector/ODBC with .NET

With a suitable ODBC Manager and the Connector/ODBC driver installed,
any programming language or environment that can support ODBC can
connect to a MySQL database through Connector/ODBC.

This includes, but is not limited to, Microsoft support languages
(including Visual Basic, C# and interfaces such as ODBC.NET), Perl
(through the DBI module, and the DBD::ODBC driver).


File: manual.info,  Node: connector-odbc-examples-programming-vb,  Next: connector-odbc-examples-programming-net,  Prev: connector-odbc-examples-programming,  Up: connector-odbc-examples-programming

22.1.5.11 Using Connector/ODBC with Visual Basic Using ADO, DAO and RDO
.......................................................................

* Menu:

* connector-odbc-examples-programming-vb-ado::  ADO: `rs.addNew', `rs.delete', and `rs.update'
* connector-odbc-examples-programming-vb-dao::  DAO: `rs.addNew', `rs.update', and Scrolling
* connector-odbc-examples-programming-vb-rdo::  RDO: `rs.addNew' and `rs.update'

This section contains simple examples of the use of Connector/ODBC with
ADO, DAO and RDO.


File: manual.info,  Node: connector-odbc-examples-programming-vb-ado,  Next: connector-odbc-examples-programming-vb-dao,  Prev: connector-odbc-examples-programming-vb,  Up: connector-odbc-examples-programming-vb

22.1.5.12 ADO: `rs.addNew', `rs.delete', and `rs.update'
........................................................

The following ADO (ActiveX Data Objects) example creates a table
`my_ado' and demonstrates the use of `rs.addNew', `rs.delete', and
`rs.update'.

     Private Sub myodbc_ado_Click()

     Dim conn As ADODB.Connection
     Dim rs As ADODB.Recordset
     Dim fld As ADODB.Field
     Dim sql As String

     'connect to MySQL server using Connector/ODBC
     Set conn = New ADODB.Connection
     conn.ConnectionString = "DRIVER={MySQL ODBC 3.51 Driver};"_
     & "SERVER=localhost;"_
     & " DATABASE=test;"_
     & "UID=venu;PWD=venu; OPTION=3"

     conn.Open

     'create table
     conn.Execute "DROP TABLE IF EXISTS my_ado"
     conn.Execute "CREATE TABLE my_ado(id int not null primary key, name varchar(20)," _
     & "txt text, dt date, tm time, ts timestamp)"

     'direct insert
     conn.Execute "INSERT INTO my_ado(id,name,txt) values(1,100,'venu')"
     conn.Execute "INSERT INTO my_ado(id,name,txt) values(2,200,'MySQL')"
     conn.Execute "INSERT INTO my_ado(id,name,txt) values(3,300,'Delete')"

     Set rs = New ADODB.Recordset
     rs.CursorLocation = adUseServer

     'fetch the initial table ..
     rs.Open "SELECT * FROM my_ado", conn
     Debug.Print rs.RecordCount
     rs.MoveFirst
     Debug.Print String(50, "-") & "Initial my_ado Result Set " & String(50, "-")
     For Each fld In rs.Fields
     Debug.Print fld.Name,
     Next
     Debug.Print

     Do Until rs.EOF
     For Each fld In rs.Fields
     Debug.Print fld.Value,
     Next
     rs.MoveNext
     Debug.Print
     Loop
     rs.Close

     'rs insert
     rs.Open "select * from my_ado", conn, adOpenDynamic, adLockOptimistic
     rs.AddNew
     rs!Name = "Monty"
     rs!txt = "Insert row"
     rs.Update
     rs.Close

     'rs update
     rs.Open "SELECT * FROM my_ado"
     rs!Name = "update"
     rs!txt = "updated-row"
     rs.Update
     rs.Close

     'rs update second time..
     rs.Open "SELECT * FROM my_ado"
     rs!Name = "update"
     rs!txt = "updated-second-time"
     rs.Update
     rs.Close

     'rs delete
     rs.Open "SELECT * FROM my_ado"
     rs.MoveNext
     rs.MoveNext
     rs.Delete
     rs.Close

     'fetch the updated table ..
     rs.Open "SELECT * FROM my_ado", conn
     Debug.Print rs.RecordCount
     rs.MoveFirst
     Debug.Print String(50, "-") & "Updated my_ado Result Set " & String(50, "-")
     For Each fld In rs.Fields
     Debug.Print fld.Name,
     Next
     Debug.Print

     Do Until rs.EOF
     For Each fld In rs.Fields
     Debug.Print fld.Value,
     Next
     rs.MoveNext
     Debug.Print
     Loop
     rs.Close
     conn.Close
     End Sub


File: manual.info,  Node: connector-odbc-examples-programming-vb-dao,  Next: connector-odbc-examples-programming-vb-rdo,  Prev: connector-odbc-examples-programming-vb-ado,  Up: connector-odbc-examples-programming-vb

22.1.5.13 DAO: `rs.addNew', `rs.update', and Scrolling
......................................................

The following DAO (Data Access Objects) example creates a table
`my_dao' and demonstrates the use of `rs.addNew', `rs.update', and
result set scrolling.

     Private Sub myodbc_dao_Click()

     Dim ws As Workspace
     Dim conn As Connection
     Dim queryDef As queryDef
     Dim str As String

     'connect to MySQL using MySQL ODBC 3.51 Driver
     Set ws = DBEngine.CreateWorkspace("", "venu", "venu", dbUseODBC)
     str = "odbc;DRIVER={MySQL ODBC 3.51 Driver};"_
     & "SERVER=localhost;"_
     & " DATABASE=test;"_
     & "UID=venu;PWD=venu; OPTION=3"
     Set conn = ws.OpenConnection("test", dbDriverNoPrompt, False, str)

     'Create table my_dao
     Set queryDef = conn.CreateQueryDef("", "drop table if exists my_dao")
     queryDef.Execute

     Set queryDef = conn.CreateQueryDef("", "create table my_dao(Id INT AUTO_INCREMENT PRIMARY KEY, " _
     & "Ts TIMESTAMP(14) NOT NULL, Name varchar(20), Id2 INT)")
     queryDef.Execute

     'Insert new records using rs.addNew
     Set rs = conn.OpenRecordset("my_dao")
     Dim i As Integer

     For i = 10 To 15
     rs.AddNew
     rs!Name = "insert record" & i
     rs!Id2 = i
     rs.Update
     Next i
     rs.Close

     'rs update..
     Set rs = conn.OpenRecordset("my_dao")
     rs.Edit
     rs!Name = "updated-string"
     rs.Update
     rs.Close

     'fetch the table back...
     Set rs = conn.OpenRecordset("my_dao", dbOpenDynamic)
     str = "Results:"
     rs.MoveFirst
     While Not rs.EOF
     str = " " & rs!Id & " , " & rs!Name & ", " & rs!Ts & ", " & rs!Id2
     Debug.Print "DATA:" & str
     rs.MoveNext
     Wend

     'rs Scrolling
     rs.MoveFirst
     str = " FIRST ROW: " & rs!Id & " , " & rs!Name & ", " & rs!Ts & ", " & rs!Id2
     Debug.Print str

     rs.MoveLast
     str = " LAST ROW: " & rs!Id & " , " & rs!Name & ", " & rs!Ts & ", " & rs!Id2
     Debug.Print str

     rs.MovePrevious
     str = " LAST-1 ROW: " & rs!Id & " , " & rs!Name & ", " & rs!Ts & ", " & rs!Id2
     Debug.Print str

     'free all resources
     rs.Close
     queryDef.Close
     conn.Close
     ws.Close

     End Sub


File: manual.info,  Node: connector-odbc-examples-programming-vb-rdo,  Prev: connector-odbc-examples-programming-vb-dao,  Up: connector-odbc-examples-programming-vb

22.1.5.14 RDO: `rs.addNew' and `rs.update'
..........................................

The following RDO (Remote Data Objects) example creates a table
`my_rdo' and demonstrates the use of `rs.addNew' and `rs.update'.

     Dim rs As rdoResultset
     Dim cn As New rdoConnection
     Dim cl As rdoColumn
     Dim SQL As String

     'cn.Connect = "DSN=test;"
     cn.Connect = "DRIVER={MySQL ODBC 3.51 Driver};"_
     & "SERVER=localhost;"_
     & " DATABASE=test;"_
     & "UID=venu;PWD=venu; OPTION=3"

     cn.CursorDriver = rdUseOdbc
     cn.EstablishConnection rdDriverPrompt

     'drop table my_rdo
     SQL = "drop table if exists my_rdo"
     cn.Execute SQL, rdExecDirect

     'create table my_rdo
     SQL = "create table my_rdo(id int, name varchar(20))"
     cn.Execute SQL, rdExecDirect

     'insert - direct
     SQL = "insert into my_rdo values (100,'venu')"
     cn.Execute SQL, rdExecDirect

     SQL = "insert into my_rdo values (200,'MySQL')"
     cn.Execute SQL, rdExecDirect

     'rs insert
     SQL = "select * from my_rdo"
     Set rs = cn.OpenResultset(SQL, rdOpenStatic, rdConcurRowVer, rdExecDirect)
     rs.AddNew
     rs!id = 300
     rs!Name = "Insert1"
     rs.Update
     rs.Close

     'rs insert
     SQL = "select * from my_rdo"
     Set rs = cn.OpenResultset(SQL, rdOpenStatic, rdConcurRowVer, rdExecDirect)
     rs.AddNew
     rs!id = 400
     rs!Name = "Insert 2"
     rs.Update
     rs.Close

     'rs update
     SQL = "select * from my_rdo"
     Set rs = cn.OpenResultset(SQL, rdOpenStatic, rdConcurRowVer, rdExecDirect)
     rs.Edit
     rs!id = 999
     rs!Name = "updated"
     rs.Update
     rs.Close

     'fetch back...
     SQL = "select * from my_rdo"
     Set rs = cn.OpenResultset(SQL, rdOpenStatic, rdConcurRowVer, rdExecDirect)
     Do Until rs.EOF
     For Each cl In rs.rdoColumns
     Debug.Print cl.Value,
     Next
     rs.MoveNext
     Debug.Print
     Loop
     Debug.Print "Row count="; rs.RowCount

     'close
     rs.Close
     cn.Close

     End Sub


File: manual.info,  Node: connector-odbc-examples-programming-net,  Prev: connector-odbc-examples-programming-vb,  Up: connector-odbc-examples-programming

22.1.5.15 Using Connector/ODBC with .NET
........................................

* Menu:

* connector-odbc-examples-programming-net-csharp::  Using Connector/ODBC with ODBC.NET and C# (C sharp)
* connector-odbc-examples-programming-net-vb::  Using Connector/ODBC with ODBC.NET and Visual Basic

This section contains simple examples that demonstrate the use of
Connector/ODBC drivers with ODBC.NET.


File: manual.info,  Node: connector-odbc-examples-programming-net-csharp,  Next: connector-odbc-examples-programming-net-vb,  Prev: connector-odbc-examples-programming-net,  Up: connector-odbc-examples-programming-net

22.1.5.16 Using Connector/ODBC with ODBC.NET and C# (C sharp)
.............................................................

The following sample creates a table `my_odbc_net' and demonstrates its
use in C#.

     /**
      * @sample    : mycon.cs
      * @purpose   : Demo sample for ODBC.NET using Connector/ODBC
      * @author    : Venu, <myodbc@lists.mysql.com>
      *
      * (C) Copyright MySQL AB, 1995-2006
      *
      **/

     /* build command
      *
      *  csc /t:exe
      *      /out:mycon.exe mycon.cs
      *      /r:Microsoft.Data.Odbc.dll
      */

     using Console = System.Console;
     using Microsoft.Data.Odbc;

     namespace myodbc3
     {
       class mycon
       {
         static void Main(string[] args)
         {
           try
             {
               //Connection string for Connector/ODBC 3.51
               string MyConString = "DRIVER={MySQL ODBC 3.51 Driver};" +
                 "SERVER=localhost;" +
                 "DATABASE=test;" +
                 "UID=venu;" +
                 "PASSWORD=venu;" +
                 "OPTION=3";

               //Connect to MySQL using Connector/ODBC
               OdbcConnection MyConnection = new OdbcConnection(MyConString);
               MyConnection.Open();

               Console.WriteLine("\n !!! success, connected successfully !!!\n");

               //Display connection information
               Console.WriteLine("Connection Information:");
               Console.WriteLine("\tConnection String:" +
                                 MyConnection.ConnectionString);
               Console.WriteLine("\tConnection Timeout:" +
                                 MyConnection.ConnectionTimeout);
               Console.WriteLine("\tDatabase:" +
                                 MyConnection.Database);
               Console.WriteLine("\tDataSource:" +
                                 MyConnection.DataSource);
               Console.WriteLine("\tDriver:" +
                                 MyConnection.Driver);
               Console.WriteLine("\tServerVersion:" +
                                 MyConnection.ServerVersion);

               //Create a sample table
               OdbcCommand MyCommand =
                 new OdbcCommand("DROP TABLE IF EXISTS my_odbc_net",
                                 MyConnection);
               MyCommand.ExecuteNonQuery();
               MyCommand.CommandText =
                 "CREATE TABLE my_odbc_net(id int, name varchar(20), idb bigint)";
               MyCommand.ExecuteNonQuery();

               //Insert
               MyCommand.CommandText =
                 "INSERT INTO my_odbc_net VALUES(10,'venu', 300)";
               Console.WriteLine("INSERT, Total rows affected:" +
                                 MyCommand.ExecuteNonQuery());;

               //Insert
               MyCommand.CommandText =
                 "INSERT INTO my_odbc_net VALUES(20,'mysql',400)";
               Console.WriteLine("INSERT, Total rows affected:" +
                                 MyCommand.ExecuteNonQuery());

               //Insert
               MyCommand.CommandText =
                 "INSERT INTO my_odbc_net VALUES(20,'mysql',500)";
               Console.WriteLine("INSERT, Total rows affected:" +
                                 MyCommand.ExecuteNonQuery());

               //Update
               MyCommand.CommandText =
                 "UPDATE my_odbc_net SET id=999 WHERE id=20";
               Console.WriteLine("Update, Total rows affected:" +
                                 MyCommand.ExecuteNonQuery());

               //COUNT(*)
               MyCommand.CommandText =
                 "SELECT COUNT(*) as TRows FROM my_odbc_net";
               Console.WriteLine("Total Rows:" +
                                 MyCommand.ExecuteScalar());

               //Fetch
               MyCommand.CommandText = "SELECT * FROM my_odbc_net";
               OdbcDataReader MyDataReader;
               MyDataReader =  MyCommand.ExecuteReader();
               while (MyDataReader.Read())
                 {
                   if(string.Compare(MyConnection.Driver,"myodbc3.dll") == 0) {
                     //Supported only by Connector/ODBC 3.51
                     Console.WriteLine("Data:" + MyDataReader.GetInt32(0) + " " +
                                       MyDataReader.GetString(1) + " " +
                                       MyDataReader.GetInt64(2));
                   }
                   else {
                     //BIGINTs not supported by Connector/ODBC
                     Console.WriteLine("Data:" + MyDataReader.GetInt32(0) + " " +
                                       MyDataReader.GetString(1) + " " +
                                       MyDataReader.GetInt32(2));
                   }
                 }

               //Close all resources
               MyDataReader.Close();
               MyConnection.Close();
             }
           catch (OdbcException MyOdbcException) //Catch any ODBC exception ..
             {
               for (int i=0; i < MyOdbcException.Errors.Count; i++)
                 {
                   Console.Write("ERROR #" + i + "\n" +
                                 "Message: " +
                                 MyOdbcException.Errors[i].Message + "\n" +
                                 "Native: " +
                                 MyOdbcException.Errors[i].NativeError.ToString() + "\n" +
                                 "Source: " +
                                 MyOdbcException.Errors[i].Source + "\n" +
                                 "SQL: " +
                                 MyOdbcException.Errors[i].SQLState + "\n");
                 }
             }
         }
       }
     }


File: manual.info,  Node: connector-odbc-examples-programming-net-vb,  Prev: connector-odbc-examples-programming-net-csharp,  Up: connector-odbc-examples-programming-net

22.1.5.17 Using Connector/ODBC with ODBC.NET and Visual Basic
.............................................................

The following sample creates a table `my_vb_net' and demonstrates the
use in VB.

     ' @sample    : myvb.vb
     ' @purpose   : Demo sample for ODBC.NET using Connector/ODBC
     ' @author    : Venu, <myodbc@lists.mysql.com>
     '
     ' (C) Copyright MySQL AB, 1995-2006
     '
     '

     '
     ' build command
     '
     ' vbc /target:exe
     '     /out:myvb.exe
     '     /r:Microsoft.Data.Odbc.dll
     '     /r:System.dll
     '     /r:System.Data.dll
     '

     Imports Microsoft.Data.Odbc
     Imports System

     Module myvb
       Sub Main()
         Try

           'Connector/ODBC 3.51 connection string
           Dim MyConString As String = "DRIVER={MySQL ODBC 3.51 Driver};" & _
           "SERVER=localhost;" & _
           "DATABASE=test;" & _
           "UID=venu;" & _
           "PASSWORD=venu;" & _
           "OPTION=3;"

           'Connection
           Dim MyConnection As New OdbcConnection(MyConString)
           MyConnection.Open()

           Console.WriteLine("Connection State::" & MyConnection.State.ToString)

           'Drop
           Console.WriteLine("Dropping table")
           Dim MyCommand As New OdbcCommand()
           MyCommand.Connection = MyConnection
           MyCommand.CommandText = "DROP TABLE IF EXISTS my_vb_net"
           MyCommand.ExecuteNonQuery()

           'Create
           Console.WriteLine("Creating....")
           MyCommand.CommandText = "CREATE TABLE my_vb_net(id int, name varchar(30))"
           MyCommand.ExecuteNonQuery()

           'Insert
           MyCommand.CommandText = "INSERT INTO my_vb_net VALUES(10,'venu')"
           Console.WriteLine("INSERT, Total rows affected:" & _
           MyCommand.ExecuteNonQuery())

           'Insert
           MyCommand.CommandText = "INSERT INTO my_vb_net VALUES(20,'mysql')"
           Console.WriteLine("INSERT, Total rows affected:" & _
           MyCommand.ExecuteNonQuery())

           'Insert
           MyCommand.CommandText = "INSERT INTO my_vb_net VALUES(20,'mysql')"
           Console.WriteLine("INSERT, Total rows affected:" & _
           MyCommand.ExecuteNonQuery())

           'Insert
           MyCommand.CommandText = "INSERT INTO my_vb_net(id) VALUES(30)"
           Console.WriteLine("INSERT, Total rows affected:" & _
                             MyCommand.ExecuteNonQuery())

           'Update
           MyCommand.CommandText = "UPDATE my_vb_net SET id=999 WHERE id=20"
           Console.WriteLine("Update, Total rows affected:" & _
           MyCommand.ExecuteNonQuery())

           'COUNT(*)
           MyCommand.CommandText = "SELECT COUNT(*) as TRows FROM my_vb_net"
           Console.WriteLine("Total Rows:" & MyCommand.ExecuteScalar())

           'Select
           Console.WriteLine("Select * FROM my_vb_net")
           MyCommand.CommandText = "SELECT * FROM my_vb_net"
           Dim MyDataReader As OdbcDataReader
           MyDataReader = MyCommand.ExecuteReader
           While MyDataReader.Read
             If MyDataReader("name") Is DBNull.Value Then
               Console.WriteLine("id = " & _
               CStr(MyDataReader("id")) & "  name = " & _
               "NULL")
             Else
               Console.WriteLine("id = " & _
               CStr(MyDataReader("id")) & "  name = " & _
               CStr(MyDataReader("name")))
             End If
           End While

           'Catch ODBC Exception
         Catch MyOdbcException As OdbcException
           Dim i As Integer
           Console.WriteLine(MyOdbcException.ToString)

           'Catch program exception
         Catch MyException As Exception
           Console.WriteLine(MyException.ToString)
         End Try
       End Sub


File: manual.info,  Node: connector-odbc-reference,  Next: connector-odbc-usagenotes,  Prev: connector-odbc-examples,  Up: connector-odbc

22.1.6 Connector/ODBC Reference
-------------------------------

* Menu:

* connector-odbc-reference-api::  Connector/ODBC API Reference
* connector-odbc-reference-datatypes::  Connector/ODBC Data Types
* connector-odbc-reference-errorcodes::  Connector/ODBC Error Codes

This section provides reference material for the Connector/ODBC API,
showing supported functions and methods, supported MySQL column types
and the corresponding native type in Connector/ODBC, and the error
codes returned by Connector/ODBC when a fault occurs.


File: manual.info,  Node: connector-odbc-reference-api,  Next: connector-odbc-reference-datatypes,  Prev: connector-odbc-reference,  Up: connector-odbc-reference

22.1.6.1 Connector/ODBC API Reference
.....................................

This section summarizes ODBC routines, categorized by functionality.

For the complete ODBC API reference, please refer to the ODBC
Programmer's Reference at
`http://msdn.microsoft.com/en-us/library/ms714177.aspx'.

An application can call `SQLGetInfo' function to obtain conformance
information about Connector/ODBC. To obtain information about support
for a specific function in the driver, an application can call
`SQLGetFunctions'.

*Note*:

For backward compatibility, the Connector/ODBC driver supports all
deprecated functions.

The following tables list Connector/ODBC API calls grouped by task:

*ODBC API Calls for Connecting to a Data Source*

Function Name       Connector/ODBCStandard  Purpose
                    Supports?           
`SQLAllocHandle'    Yes       ISO 92    Obtains an environment, connection,
                                        statement, or descriptor handle.
`SQLConnect'        Yes       ISO 92    Connects to a specific driver by
                                        data source name, user ID, and
                                        password.
`SQLDriverConnect'  Yes       ODBC      Connects to a specific driver by
                                        connection string or requests that
                                        the Driver Manager and driver
                                        display connection dialog boxes for
                                        the user.
`SQLAllocEnv'       Yes       DeprecatedObtains an environment handle
                                        allocated from driver.
`SQLAllocConnect'   Yes       DeprecatedObtains a connection handle

*ODBC API Calls for Obtaining Information about a Driver and Data
Source*

Function Name       Connector/ODBCStandard  Purpose
                    Supports?           
`SQLDataSources'    No        ISO 92    Returns the list of available data
                                        sources, handled by the Driver
                                        Manager
`SQLDrivers'        No        ODBC      Returns the list of installed
                                        drivers and their attributes,
                                        handles by Driver Manager
`SQLGetInfo'        Yes       ISO 92    Returns information about a
                                        specific driver and data source.
`SQLGetFunctions'   Yes       ISO 92    Returns supported driver functions.
`SQLGetTypeInfo'    Yes       ISO 92    Returns information about supported
                                        data types.

*ODBC API Calls for Setting and Retrieving Driver Attributes*

Function Name       Connector/ODBCStandard  Purpose
                    Supports?           
`SQLSetConnectAttr' Yes       ISO 92    Sets a connection attribute.
`SQLGetConnectAttr' Yes       ISO 92    Returns the value of a connection
                                        attribute.
`SQLSetConnectOption'Yes       DeprecatedSets a connection option
`SQLGetConnectOption'Yes       DeprecatedReturns the value of a connection
                                        option
`SQLSetEnvAttr'     Yes       ISO 92    Sets an environment attribute.
`SQLGetEnvAttr'     Yes       ISO 92    Returns the value of an environment
                                        attribute.
`SQLSetStmtAttr'    Yes       ISO 92    Sets a statement attribute.
`SQLGetStmtAttr'    Yes       ISO 92    Returns the value of a statement
                                        attribute.
`SQLSetStmtOption'  Yes       DeprecatedSets a statement option
`SQLGetStmtOption'  Yes       DeprecatedReturns the value of a statement
                                        option

*ODBC API Calls for Preparing SQL Requests*

Function Name       Connector/ODBCStandard  Purpose
                    Supports?           
`SQLAllocStmt'      Yes       DeprecatedAllocates a statement handle
`SQLPrepare'        Yes       ISO 92    Prepares an SQL statement for later
                                        execution.
`SQLBindParameter'  Yes       ODBC      Assigns storage for a parameter in
                                        an SQL statement. Connector/ODBC 5.2
                                        adds support for `out' and `inout'
                                        parameters, through the
                                        `SQL_PARAM_OUTPUT' or
                                        `SQL_PARAM_INPUT_OUTPUT' type
                                        specifiers. (`Out' and `inout'
                                        parameters are not supported for
                                        `LONGTEXT' and `LONGBLOB' columns.)
`SQLGetCursorName'  Yes       ISO 92    Returns the cursor name associated
                                        with a statement handle.
`SQLSetCursorName'  Yes       ISO 92    Specifies a cursor name.
`SQLSetScrollOptions'Yes       ODBC      Sets options that control cursor
                                        behavior.

*ODBC API Calls for Submitting Requests*

Function Name       Connector/ODBCStandard  Purpose
                    Supports?           
`SQLExecute'        Yes       ISO 92    Executes a prepared statement.
`SQLExecDirect'     Yes       ISO 92    Executes a statement
`SQLNativeSql'      Yes       ODBC      Returns the text of an SQL
                                        statement as translated by the
                                        driver.
`SQLDescribeParam'  Yes       ODBC      Returns the description for a
                                        specific parameter in a statement.
`SQLNumParams'      Yes       ISO 92    Returns the number of parameters in
                                        a statement.
`SQLParamData'      Yes       ISO 92    Used in conjunction with
                                        `SQLPutData' to supply parameter
                                        data at execution time. (Useful for
                                        long data values.)
`SQLPutData'        Yes       ISO 92    Sends part or all of a data value
                                        for a parameter. (Useful for long
                                        data values.)

*ODBC API Calls for Retrieving Results and Information about Results*

Function Name       Connector/ODBCStandard  Purpose
                    Supports?           
`SQLRowCount'       Yes       ISO 92    Returns the number of rows affected
                                        by an insert, update, or delete
                                        request.
`SQLNumResultCols'  Yes       ISO 92    Returns the number of columns in
                                        the result set.
`SQLDescribeCol'    Yes       ISO 92    Describes a column in the result
                                        set.
`SQLColAttribute'   Yes       ISO 92    Describes attributes of a column in
                                        the result set.
`SQLColAttributes'  Yes       DeprecatedDescribes attributes of a column in
                                        the result set.
`SQLFetch'          Yes       ISO 92    Returns multiple result rows.
`SQLFetchScroll'    Yes       ISO 92    Returns scrollable result rows.
`SQLExtendedFetch'  Yes       DeprecatedReturns scrollable result rows.
`SQLSetPos'         Yes       ODBC      Positions a cursor within a fetched
                                        block of data and enables an
                                        application to refresh data in the
                                        rowset or to update or delete data
                                        in the result set.
`SQLBulkOperations' Yes       ODBC      Performs bulk insertions and bulk
                                        bookmark operations, including
                                        update, delete, and fetch by
                                        bookmark.

*ODBC API Calls for Retrieving Error or Diagnostic Information*

Function Name       Connector/ODBCStandard  Purpose
                    Supports?           
`SQLError'          Yes       DeprecatedReturns additional error or status
                                        information
`SQLGetDiagField'   Yes       ISO 92    Returns additional diagnostic
                                        information (a single field of the
                                        diagnostic data structure).
`SQLGetDiagRec'     Yes       ISO 92    Returns additional diagnostic
                                        information (multiple fields of the
                                        diagnostic data structure).

*ODBC API Calls for Obtaining Information about the Data Source's System
Tables (Catalog Functions) Item*

Function Name       Connector/ODBCStandard  Purpose
                    Supports?           
`SQLColumnPrivileges'Yes       ODBC      Returns a list of columns and
                                        associated privileges for one or
                                        more tables.
`SQLColumns'        Yes       X/Open    Returns the list of column names in
                                        specified tables.
`SQLForeignKeys'    Yes       ODBC      Returns a list of column names that
                                        make up foreign keys, if they exist
                                        for a specified table.
`SQLPrimaryKeys'    Yes       ODBC      Returns the list of column names
                                        that make up the primary key for a
                                        table.
`SQLSpecialColumns' Yes       X/Open    Returns information about the
                                        optimal set of columns that uniquely
                                        identifies a row in a specified
                                        table, or the columns that are
                                        automatically updated when any
                                        value in the row is updated by a
                                        transaction.
`SQLStatistics'     Yes       ISO 92    Returns statistics about a single
                                        table and the list of indexes
                                        associated with the table.
`SQLTablePrivileges'Yes       ODBC      Returns a list of tables and the
                                        privileges associated with each
                                        table.
`SQLTables'         Yes       X/Open    Returns the list of table names
                                        stored in a specific data source.

*ODBC API Calls for Performing Transactions*

Function Name       Connector/ODBCStandard  Purpose
                    Supports?           
`SQLTransact'       Yes       DeprecatedCommits or rolls back a transaction
`SQLEndTran'        Yes       ISO 92    Commits or rolls back a transaction.

*ODBC API Calls for Terminating a Statement*

Function Name       Connector/ODBCStandard  Purpose
                    Supports?           
`SQLFreeStmt'       Yes       ISO 92    Ends statement processing, discards
                                        pending results, and, optionally,
                                        frees all resources associated with
                                        the statement handle.
`SQLCloseCursor'    Yes       ISO 92    Closes a cursor that has been
                                        opened on a statement handle.
`SQLCancel'         Yes       ISO 92    Cancels an SQL statement.

*ODBC API Calls for Terminating a Connection*

Function Name       Connector/ODBCStandard  Purpose
                    Supports?           
`SQLDisconnect'     Yes       ISO 92    Closes the connection.
`SQLFreeHandle'     Yes       ISO 92    Releases an environment,
                                        connection, statement, or
                                        descriptor handle.
`SQLFreeConnect'    Yes       DeprecatedReleases connection handle.
`SQLFreeEnv'        Yes       DeprecatedReleases an environment handle.


File: manual.info,  Node: connector-odbc-reference-datatypes,  Next: connector-odbc-reference-errorcodes,  Prev: connector-odbc-reference-api,  Up: connector-odbc-reference

22.1.6.2 Connector/ODBC Data Types
..................................

The following table illustrates how Connector/ODBC maps the server data
types to default SQL and C data types.

*How Connector/ODBC Maps MySQL Data Types to SQL and C Data Types*

Native Value             SQL Type                 C Type
`bigint unsigned'        `SQL_BIGINT'             `SQL_C_UBIGINT'
`bigint'                 `SQL_BIGINT'             `SQL_C_SBIGINT'
`bit'                    `SQL_BIT'                `SQL_C_BIT'
`bit'                    `SQL_CHAR'               `SQL_C_CHAR'
`blob'                   `SQL_LONGVARBINARY'      `SQL_C_BINARY'
`bool'                   `SQL_CHAR'               `SQL_C_CHAR'
`char'                   `SQL_CHAR'               `SQL_C_CHAR'
`date'                   `SQL_DATE'               `SQL_C_DATE'
`datetime'               `SQL_TIMESTAMP'          `SQL_C_TIMESTAMP'
`decimal'                `SQL_DECIMAL'            `SQL_C_CHAR'
`double precision'       `SQL_DOUBLE'             `SQL_C_DOUBLE'
`double'                 `SQL_FLOAT'              `SQL_C_DOUBLE'
`enum'                   `SQL_VARCHAR'            `SQL_C_CHAR'
`float'                  `SQL_REAL'               `SQL_C_FLOAT'
`int unsigned'           `SQL_INTEGER'            `SQL_C_ULONG'
`int'                    `SQL_INTEGER'            `SQL_C_SLONG'
`integer unsigned'       `SQL_INTEGER'            `SQL_C_ULONG'
`integer'                `SQL_INTEGER'            `SQL_C_SLONG'
`long varbinary'         `SQL_LONGVARBINARY'      `SQL_C_BINARY'
`long varchar'           `SQL_LONGVARCHAR'        `SQL_C_CHAR'
`longblob'               `SQL_LONGVARBINARY'      `SQL_C_BINARY'
`longtext'               `SQL_LONGVARCHAR'        `SQL_C_CHAR'
`mediumblob'             `SQL_LONGVARBINARY'      `SQL_C_BINARY'
`mediumint unsigned'     `SQL_INTEGER'            `SQL_C_ULONG'
`mediumint'              `SQL_INTEGER'            `SQL_C_SLONG'
`mediumtext'             `SQL_LONGVARCHAR'        `SQL_C_CHAR'
`numeric'                `SQL_NUMERIC'            `SQL_C_CHAR'
`real'                   `SQL_FLOAT'              `SQL_C_DOUBLE'
`set'                    `SQL_VARCHAR'            `SQL_C_CHAR'
`smallint unsigned'      `SQL_SMALLINT'           `SQL_C_USHORT'
`smallint'               `SQL_SMALLINT'           `SQL_C_SSHORT'
`text'                   `SQL_LONGVARCHAR'        `SQL_C_CHAR'
`time'                   `SQL_TIME'               `SQL_C_TIME'
`timestamp'              `SQL_TIMESTAMP'          `SQL_C_TIMESTAMP'
`tinyblob'               `SQL_LONGVARBINARY'      `SQL_C_BINARY'
`tinyint unsigned'       `SQL_TINYINT'            `SQL_C_UTINYINT'
`tinyint'                `SQL_TINYINT'            `SQL_C_STINYINT'
`tinytext'               `SQL_LONGVARCHAR'        `SQL_C_CHAR'
`varchar'                `SQL_VARCHAR'            `SQL_C_CHAR'
`year'                   `SQL_SMALLINT'           `SQL_C_SHORT'


File: manual.info,  Node: connector-odbc-reference-errorcodes,  Prev: connector-odbc-reference-datatypes,  Up: connector-odbc-reference

22.1.6.3 Connector/ODBC Error Codes
...................................

The following tables lists the error codes returned by Connector/ODBC
apart from the server errors.

*Special Error Codes Returned by Connector/ODBC*

Native  SQLSTATE 2   SQLSTATE 3   Error Message
Code                              
500     01000        01000        General warning
501     01004        01004        String data, right truncated
502     01S02        01S02        Option value changed
503     01S03        01S03        No rows updated/deleted
504     01S04        01S04        More than one row updated/deleted
505     01S06        01S06        Attempt to fetch before the result set
                                  returned the first row set
506     07001        07002        `SQLBindParameter' not used for all
                                  parameters
507     07005        07005        Prepared statement not a
                                  cursor-specification
508     07009        07009        Invalid descriptor index
509     08002        08002        Connection name in use
510     08003        08003        Connection does not exist
511     24000        24000        Invalid cursor state
512     25000        25000        Invalid transaction state
513     25S01        25S01        Transaction state unknown
514     34000        34000        Invalid cursor name
515     S1000        HY000        General driver defined error
516     S1001        HY001        Memory allocation error
517     S1002        HY002        Invalid column number
518     S1003        HY003        Invalid application buffer type
519     S1004        HY004        Invalid SQL data type
520     S1009        HY009        Invalid use of null pointer
521     S1010        HY010        Function sequence error
522     S1011        HY011        Attribute can not be set now
523     S1012        HY012        Invalid transaction operation code
524     S1013        HY013        Memory management error
525     S1015        HY015        No cursor name available
526     S1024        HY024        Invalid attribute value
527     S1090        HY090        Invalid string or buffer length
528     S1091        HY091        Invalid descriptor field identifier
529     S1092        HY092        Invalid attribute/option identifier
530     S1093        HY093        Invalid parameter number
531     S1095        HY095        Function type out of range
532     S1106        HY106        Fetch type out of range
533     S1117        HY117        Row value out of range
534     S1109        HY109        Invalid cursor position
535     S1C00        HYC00        Optional feature not implemented
0       21S01        21S01        Column count does not match value count
0       23000        23000        Integrity constraint violation
0       42000        42000        Syntax error or access violation
0       42S02        42S02        Base table or view not found
0       42S12        42S12        Index not found
0       42S21        42S21        Column already exists
0       42S22        42S22        Column not found
0       08S01        08S01        Communication link failure


File: manual.info,  Node: connector-odbc-usagenotes,  Next: connector-odbc-support,  Prev: connector-odbc-reference,  Up: connector-odbc

22.1.7 Connector/ODBC Notes and Tips
------------------------------------

* Menu:

* connector-odbc-usagenotes-functionality::  Connector/ODBC General Functionality
* connector-odbc-usagenotes-apptips::  Connector/ODBC Application-Specific Tips
* connector-odbc-errors::        Connector/ODBC Errors and Resolutions (FAQ)

Here are some common notes and tips for using Connector/ODBC within
different environments, applications and tools. The notes provided here
are based on the experiences of Connector/ODBC developers and users.


File: manual.info,  Node: connector-odbc-usagenotes-functionality,  Next: connector-odbc-usagenotes-apptips,  Prev: connector-odbc-usagenotes,  Up: connector-odbc-usagenotes

22.1.7.1 Connector/ODBC General Functionality
.............................................

* Menu:

* connector-odbc-usagenotes-functionality-last-insert-id::  Obtaining Auto-Increment Values
* connector-odbc-usagenotes-functionality-dynamic-cursor::  Dynamic Cursor Support
* connector-odbc-usagenotes-functionality-performance::  Connector/ODBC Performance
* connector-odbc-usagenotes-functionality-query-timeout::  Setting ODBC Query Timeout in Windows

This section provides help with common queries and areas of
functionality in MySQL and how to use them with Connector/ODBC.


File: manual.info,  Node: connector-odbc-usagenotes-functionality-last-insert-id,  Next: connector-odbc-usagenotes-functionality-dynamic-cursor,  Prev: connector-odbc-usagenotes-functionality,  Up: connector-odbc-usagenotes-functionality

22.1.7.2 Obtaining Auto-Increment Values
........................................

Obtaining the value of column that uses `AUTO_INCREMENT' after an *Note
`INSERT': insert. statement can be achieved in a number of different
ways. To obtain the value immediately after an *Note `INSERT': insert,
use a *Note `SELECT': select. query with the `LAST_INSERT_ID()'
function.

For example, using Connector/ODBC you would execute two separate
statements, the *Note `INSERT': insert.  statement and the *Note
`SELECT': select. query to obtain the auto-increment value.

     INSERT INTO tbl (auto,text) VALUES(NULL,'text');
     SELECT LAST_INSERT_ID();

If you do not require the value within your application, but do require
the value as part of another *Note `INSERT': insert, the entire process
can be handled by executing the following statements:

     INSERT INTO tbl (auto,text) VALUES(NULL,'text');
     INSERT INTO tbl2 (id,text) VALUES(LAST_INSERT_ID(),'text');

Certain ODBC applications (including Delphi and Access) may have
trouble obtaining the auto-increment value using the previous examples.
In this case, try the following statement as an alternative:

     SELECT * FROM tbl WHERE auto IS NULL;

This alternative method requires that `sql_auto_is_null' variable is
not set to 0. See *Note server-system-variables::.

See also *Note getting-unique-id::.


File: manual.info,  Node: connector-odbc-usagenotes-functionality-dynamic-cursor,  Next: connector-odbc-usagenotes-functionality-performance,  Prev: connector-odbc-usagenotes-functionality-last-insert-id,  Up: connector-odbc-usagenotes-functionality

22.1.7.3 Dynamic Cursor Support
...............................

Support for the `dynamic cursor' is provided in Connector/ODBC 3.51,
but dynamic cursors are not enabled by default. You can enable this
function within Windows by selecting the `Enable Dynamic Cursor' check
box within the ODBC Data Source Administrator.

On other platforms, you can enable the dynamic cursor by adding `32' to
the `OPTION' value when creating the DSN.


File: manual.info,  Node: connector-odbc-usagenotes-functionality-performance,  Next: connector-odbc-usagenotes-functionality-query-timeout,  Prev: connector-odbc-usagenotes-functionality-dynamic-cursor,  Up: connector-odbc-usagenotes-functionality

22.1.7.4 Connector/ODBC Performance
...................................

The Connector/ODBC driver has been optimized to provide very fast
performance. If you experience problems with the performance of
Connector/ODBC, or notice a large amount of disk activity for simple
queries, there are a number of aspects to check:

   * Ensure that `ODBC Tracing' is not enabled. With tracing enabled, a
     lot of information is recorded in the tracing file by the ODBC
     Manager. You can check, and disable, tracing within Windows using
     the `Tracing' panel of the ODBC Data Source Administrator. Within
     Mac OS X, check the `Tracing' panel of ODBC Administrator. See
     *Note connector-odbc-configuration-trace::.

   * Make sure you are using the standard version of the driver, and
     not the debug version. The debug version includes additional
     checks and reporting measures.

   * Disable the Connector/ODBC driver trace and query logs.  These
     options are enabled for each DSN, so make sure to examine only the
     DSN that you are using in your application. Within Windows, you
     can disable the Connector/ODBC and query logs by modifying the DSN
     configuration. Within Mac OS X and Unix, ensure that the driver
     trace (option value 4) and query logging (option value 524288) are
     not enabled.


File: manual.info,  Node: connector-odbc-usagenotes-functionality-query-timeout,  Prev: connector-odbc-usagenotes-functionality-performance,  Up: connector-odbc-usagenotes-functionality

22.1.7.5 Setting ODBC Query Timeout in Windows
..............................................

For more information on how to set the query timeout on Microsoft
Windows when executing queries through an ODBC connection, read the
Microsoft knowledgebase document at
`http://support.microsoft.com/default.aspx?scid=kb%3Ben-us%3B153756'.


File: manual.info,  Node: connector-odbc-usagenotes-apptips,  Next: connector-odbc-errors,  Prev: connector-odbc-usagenotes-functionality,  Up: connector-odbc-usagenotes

22.1.7.6 Connector/ODBC Application-Specific Tips
.................................................

* Menu:

* connector-odbc-usagenotes-apptips-microsoft::  Using Connector/ODBC with Microsoft Applications
* connector-odbc-usagenotes-apptips-borland::  Using Connector/ODBC with Borland Applications
* connector-odbc-usagenotes-apptips-coldfusion::  Using Connector/ODBC with ColdFusion
* connector-odbc-usagenotes-apptips-openoffice::  Using Connector/ODBC with OpenOffice.org
* connector-odbc-usagenotes-apptips-sambarserver::  Using Connector/ODBC with Sambar Server
* connector-odbc-usagenotes-apptips-datajunction::  Using Connector/ODBC with Pervasive Software DataJunction
* connector-odbc-usagenotes-apptips-vision::  Using Connector/ODBC with SunSystems Vision

Most programs should work with Connector/ODBC, but for each of those
listed here, there are specific notes and tips to improve or enhance
the way you work with Connector/ODBC and these applications.

With all applications, ensure that you are using the latest
Connector/ODBC drivers, ODBC Manager and any supporting libraries and
interfaces used by your application. For example, on Windows, using the
latest version of Microsoft Data Access Components (MDAC) will improve
the compatibility with ODBC in general, and with the Connector/ODBC
driver.


File: manual.info,  Node: connector-odbc-usagenotes-apptips-microsoft,  Next: connector-odbc-usagenotes-apptips-borland,  Prev: connector-odbc-usagenotes-apptips,  Up: connector-odbc-usagenotes-apptips

22.1.7.7 Using Connector/ODBC with Microsoft Applications
.........................................................

* Menu:

* connector-odbc-usagenotes-apptips-microsoft-access::  Microsoft Access
* connector-odbc-usagenotes-apptips-microsoft-excel::  Microsoft Excel and Column Types
* connector-odbc-usagenotes-apptips-microsoft-visualbasic::  Microsoft Visual Basic
* connector-odbc-usagenotes-apptips-microsoft-visualinterdev::  Microsoft Visual InterDev
* connector-odbc-usagenotes-apptips-microsoft-visualobjects::  Visual Objects
* connector-odbc-usagenotes-apptips-microsoft-ado::  Microsoft ADO
* connector-odbc-usagenotes-apptips-microsoft-asp::  Using Connector/ODBC with Active Server Pages (ASP)
* connector-odbc-usagenotes-apptips-microsoft-vb-asp::  Using Connector/ODBC with Visual Basic (ADO, DAO and RDO) and ASP

The majority of Microsoft applications have been tested with
Connector/ODBC, including Microsoft Office, Microsoft Access and the
various programming languages supported within ASP and Microsoft Visual
Studio.


File: manual.info,  Node: connector-odbc-usagenotes-apptips-microsoft-access,  Next: connector-odbc-usagenotes-apptips-microsoft-excel,  Prev: connector-odbc-usagenotes-apptips-microsoft,  Up: connector-odbc-usagenotes-apptips-microsoft

22.1.7.8 Microsoft Access
.........................

To improve the integration between Microsoft Access and MySQL through
Connector/ODBC:

   * For all versions of Access, enable the Connector/ODBC `Return
     matching rows' option. For Access 2.0, also enable the `Simulate
     ODBC 1.0' option.

   * Include a *Note `TIMESTAMP': datetime.  column in all tables that
     you want to be able to update.  For maximum portability, do not
     use a length specification in the column declaration (which is
     unsupported within MySQL in versions earlier than 4.1).

   * Include a primary key in each MySQL table you want to use with
     Access. If not, new or updated rows may show up as `#DELETED#'.

   * Use only *Note `DOUBLE': floating-point-types. float fields.
     Access fails when comparing with single-precision floats. The
     symptom usually is that new or updated rows may show up as
     `#DELETED#' or that you cannot find or update rows.

   * If you are using Connector/ODBC to link to a table that has a
     *Note `BIGINT': integer-types. column, the results are displayed
     as `#DELETED#'.  The work around solution is:

        * Have one more dummy column with *Note `TIMESTAMP': datetime.
          as the data type.

        * Select the `Change BIGINT columns to INT' option in the
          connection dialog in ODBC DSN Administrator.

        * Delete the table link from Access and re-create it.

     Old records may still display as `#DELETED#', but newly
     added/updated records are displayed properly.

   * If you still get the error `Another user has changed your data'
     after adding a *Note `TIMESTAMP': datetime. column, the following
     trick may help you:

     Do not use a `table' data sheet view.  Instead, create a form with
     the fields you want, and use that `form' data sheet view. Set the
     `DefaultValue' property for the *Note `TIMESTAMP': datetime.
     column to `NOW()'. Consider hiding the *Note `TIMESTAMP':
     datetime. column from view so your users are not confused.

   * In some cases, Access may generate SQL statements that MySQL
     cannot understand. You can fix this by selecting
     `"Query|SQLSpecific|Pass-Through"' from the Access menu.

   * On Windows NT, Access reports *Note `BLOB': blob. columns as `OLE
     OBJECTS'. If you want to have `MEMO' columns instead, change *Note
     `BLOB': blob. columns to *Note `TEXT': blob. with *Note `ALTER
     TABLE': alter-table.

   * Access cannot always handle the MySQL *Note `DATE': datetime.
     column properly. If you have a problem with these, change the
     columns to *Note `DATETIME': datetime.

   * If you have in Access a column defined as `BYTE', Access tries to
     export this as *Note `TINYINT': integer-types. instead of `TINYINT
     UNSIGNED'. This gives you problems if you have values larger than
     127 in the column.

   * If you have very large (long) tables in Access, it might take a
     very long time to open them. Or you might run low on virtual
     memory and eventually get an `ODBC Query Failed' error and the
     table cannot open.  To deal with this, select the following
     options:

        * Return Matching Rows (2)

        * Allow BIG Results (8).

     These add up to a value of 10 (`OPTION=10').

Some external articles and tips that may be useful when using Access,
ODBC and Connector/ODBC:

   * Read How to Trap ODBC Login Error Messages in Access
     (http://support.microsoft.com/support/kb/articles/Q124/9/01.asp?LN=EN-US&SD=gn&FR=0%3CP%3E)

   * Optimizing Access ODBC Applications

        * Optimizing for Client/Server Performance
          (http://support.microsoft.com/default.aspx?scid=kb;en-us;128808)

        * Tips for Converting Applications to Using ODBCDirect
          (http://support.microsoft.com/default.aspx?scid=kb;en-us;164481)

        * Tips for Optimizing Queries on Attached SQL Tables
          (http://support.microsoft.com/default.aspx?scid=kb;EN-US;q99321)

   * For a list of tools that can be used with Access and ODBC data
     sources, refer to http://www.mysql.com/portal/software/convertors/
     section for list of available tools.


File: manual.info,  Node: connector-odbc-usagenotes-apptips-microsoft-excel,  Next: connector-odbc-usagenotes-apptips-microsoft-visualbasic,  Prev: connector-odbc-usagenotes-apptips-microsoft-access,  Up: connector-odbc-usagenotes-apptips-microsoft

22.1.7.9 Microsoft Excel and Column Types
.........................................

If you have problems importing data into Microsoft Excel, particularly
numeric, date, and time values, this is probably because of a bug in
Excel, where the column type of the source data is used to determine
the data type when that data is inserted into a cell within the
worksheet. The result is that Excel incorrectly identifies the content
and this affects both the display format and the data when it is used
within calculations.

To address this issue, use the `CONCAT()' function in your queries. The
use of `CONCAT()' forces Excel to treat the value as a string, which
Excel will then parse and usually correctly identify the embedded
information.

However, even with this option, some data may be incorrectly formatted,
even though the source data remains unchanged.  Use the `Format Cells'
option within Excel to change the format of the displayed information.


File: manual.info,  Node: connector-odbc-usagenotes-apptips-microsoft-visualbasic,  Next: connector-odbc-usagenotes-apptips-microsoft-visualinterdev,  Prev: connector-odbc-usagenotes-apptips-microsoft-excel,  Up: connector-odbc-usagenotes-apptips-microsoft

22.1.7.10 Microsoft Visual Basic
................................

To be able to update a table, you must define a primary key for the
table.

Visual Basic with ADO cannot handle big integers. This means that some
queries like *Note `SHOW PROCESSLIST': show-processlist. do not work
properly. The fix is to use `OPTION=16384' in the ODBC connect string
or to select the `Change BIGINT columns to INT' option in the
Connector/ODBC connect screen.  You may also want to select the `Return
matching rows' option.


File: manual.info,  Node: connector-odbc-usagenotes-apptips-microsoft-visualinterdev,  Next: connector-odbc-usagenotes-apptips-microsoft-visualobjects,  Prev: connector-odbc-usagenotes-apptips-microsoft-visualbasic,  Up: connector-odbc-usagenotes-apptips-microsoft

22.1.7.11 Microsoft Visual InterDev
...................................

If you have a *Note `BIGINT': integer-types. in your result, you may
get the error `[Microsoft][ODBC Driver Manager] Driver does not support
this parameter'. Try selecting the `Change BIGINT columns to INT'
option in the Connector/ODBC connect screen.


File: manual.info,  Node: connector-odbc-usagenotes-apptips-microsoft-visualobjects,  Next: connector-odbc-usagenotes-apptips-microsoft-ado,  Prev: connector-odbc-usagenotes-apptips-microsoft-visualinterdev,  Up: connector-odbc-usagenotes-apptips-microsoft

22.1.7.12 Visual Objects
........................

Select the `Don't optimize column widths' option.


File: manual.info,  Node: connector-odbc-usagenotes-apptips-microsoft-ado,  Next: connector-odbc-usagenotes-apptips-microsoft-asp,  Prev: connector-odbc-usagenotes-apptips-microsoft-visualobjects,  Up: connector-odbc-usagenotes-apptips-microsoft

22.1.7.13 Microsoft ADO
.......................

When you are coding with the ADO API and Connector/ODBC, you need to
pay attention to some default properties that aren't supported by the
MySQL server. For example, using the `CursorLocation Property' as
`adUseServer' returns a result of -1 for the `RecordCount Property'. To
have the right value, you need to set this property to `adUseClient',
as shown in the VB code here:

     Dim myconn As New ADODB.Connection
     Dim myrs As New Recordset
     Dim mySQL As String
     Dim myrows As Long

     myconn.Open "DSN=MyODBCsample"
     mySQL = "SELECT * from user"
     myrs.Source = mySQL
     Set myrs.ActiveConnection = myconn
     myrs.CursorLocation = adUseClient
     myrs.Open
     myrows = myrs.RecordCount

     myrs.Close
     myconn.Close

Another workaround is to use a `SELECT COUNT(*)' statement for a
similar query to get the correct row count.

To find the number of rows affected by a specific SQL statement in ADO,
use the `RecordsAffected' property in the ADO execute method. For more
information on the usage of execute method, refer to
`http://msdn.microsoft.com/library/default.asp?url=/library/en-us/ado270/htm/mdmthcnnexecute.asp'.

For information, see ActiveX Data Objects(ADO) Frequently Asked
Questions
(http://support.microsoft.com/default.aspx?scid=kb;EN-US;q183606).


File: manual.info,  Node: connector-odbc-usagenotes-apptips-microsoft-asp,  Next: connector-odbc-usagenotes-apptips-microsoft-vb-asp,  Prev: connector-odbc-usagenotes-apptips-microsoft-ado,  Up: connector-odbc-usagenotes-apptips-microsoft

22.1.7.14 Using Connector/ODBC with Active Server Pages (ASP)
.............................................................

Select the `Return matching rows' option in the DSN.

For more information about how to access MySQL through ASP using
Connector/ODBC, refer to the following articles:

   * Using MyODBC To Access Your MySQL Database Via ASP
     (http://www.devarticles.com/c/a/ASP/Using-MyODBC-To-Access-Your-MySQL-Database-Via-ASP/)

   * ASP and MySQL at DWAM.NT (http://www.dwam.net/mysql/asp_myodbc.asp)

A Frequently Asked Questions list for ASP can be found at
`http://support.microsoft.com/default.aspx?scid=/Support/ActiveServer/faq/data/adofaq.asp'.


File: manual.info,  Node: connector-odbc-usagenotes-apptips-microsoft-vb-asp,  Prev: connector-odbc-usagenotes-apptips-microsoft-asp,  Up: connector-odbc-usagenotes-apptips-microsoft

22.1.7.15 Using Connector/ODBC with Visual Basic (ADO, DAO and RDO) and ASP
...........................................................................

Some articles that may help with Visual Basic and ASP:

   * MySQL BLOB columns and Visual Basic 6
     (http://dev.mysql.com/tech-resources/articles/vb-blob-handling.html)
     by Mike Hillyer (<mike@openwin.org>).

   * How to map Visual basic data type to MySQL types
     (http://dev.mysql.com/tech-resources/articles/visual-basic-datatypes.html)
     by Mike Hillyer (<mike@openwin.org>).


File: manual.info,  Node: connector-odbc-usagenotes-apptips-borland,  Next: connector-odbc-usagenotes-apptips-coldfusion,  Prev: connector-odbc-usagenotes-apptips-microsoft,  Up: connector-odbc-usagenotes-apptips

22.1.7.16 Using Connector/ODBC with Borland Applications
........................................................

* Menu:

* connector-odbc-usagenotes-apptips-borland-builder::  Using Connector/ODBC with Borland Builder 4
* connector-odbc-usagenotes-apptips-borland-delphi::  Using Connector/ODBC with Delphi
* connector-odbc-usagenotes-apptips-borland-cppbuilder::  Using Connector/ODBC with C++ Builder

With all Borland applications where the Borland Database Engine (BDE)
is used, follow these steps to improve compatibility:

   * Update to BDE 3.2 or newer.

   * Enable the `Don't optimize column widths' option in the DSN.

   * Enabled the `Return matching rows' option in the DSN.


File: manual.info,  Node: connector-odbc-usagenotes-apptips-borland-builder,  Next: connector-odbc-usagenotes-apptips-borland-delphi,  Prev: connector-odbc-usagenotes-apptips-borland,  Up: connector-odbc-usagenotes-apptips-borland

22.1.7.17 Using Connector/ODBC with Borland Builder 4
.....................................................

When you start a query, you can use the `Active' property or the `Open'
method. Note that `Active' starts by automatically issuing a `SELECT *
FROM ...' query. That may not be a good thing if your tables are large.


File: manual.info,  Node: connector-odbc-usagenotes-apptips-borland-delphi,  Next: connector-odbc-usagenotes-apptips-borland-cppbuilder,  Prev: connector-odbc-usagenotes-apptips-borland-builder,  Up: connector-odbc-usagenotes-apptips-borland

22.1.7.18 Using Connector/ODBC with Delphi
..........................................

Also, here is some potentially useful Delphi code that sets up both an
ODBC entry and a BDE entry for Connector/ODBC.  The BDE entry requires
a BDE Alias Editor that is free at a Delphi Super Page near you.
(Thanks to Bryan Brunton <bryan@flesherfab.com> for this):

     fReg:= TRegistry.Create;
     fReg.OpenKey('\Software\ODBC\ODBC.INI\DocumentsFab', True);
     fReg.WriteString('Database', 'Documents');
     fReg.WriteString('Description', ' ');
     fReg.WriteString('Driver', 'C:\WINNT\System32\myodbc.dll');
     fReg.WriteString('Flag', '1');
     fReg.WriteString('Password', '');
     fReg.WriteString('Port', ' ');
     fReg.WriteString('Server', 'xmark');
     fReg.WriteString('User', 'winuser');
     fReg.OpenKey('\Software\ODBC\ODBC.INI\ODBC Data Sources', True);
     fReg.WriteString('DocumentsFab', 'MySQL');
     fReg.CloseKey;
     fReg.Free;

     Memo1.Lines.Add('DATABASE NAME=');
     Memo1.Lines.Add('USER NAME=');
     Memo1.Lines.Add('ODBC DSN=DocumentsFab');
     Memo1.Lines.Add('OPEN MODE=READ/WRITE');
     Memo1.Lines.Add('BATCH COUNT=200');
     Memo1.Lines.Add('LANGDRIVER=');
     Memo1.Lines.Add('MAX ROWS=-1');
     Memo1.Lines.Add('SCHEMA CACHE DIR=');
     Memo1.Lines.Add('SCHEMA CACHE SIZE=8');
     Memo1.Lines.Add('SCHEMA CACHE TIME=-1');
     Memo1.Lines.Add('SQLPASSTHRU MODE=SHARED AUTOCOMMIT');
     Memo1.Lines.Add('SQLQRYMODE=');
     Memo1.Lines.Add('ENABLE SCHEMA CACHE=FALSE');
     Memo1.Lines.Add('ENABLE BCD=FALSE');
     Memo1.Lines.Add('ROWSET SIZE=20');
     Memo1.Lines.Add('BLOBS TO CACHE=64');
     Memo1.Lines.Add('BLOB SIZE=32');

     AliasEditor.Add('DocumentsFab','MySQL',Memo1.Lines);


File: manual.info,  Node: connector-odbc-usagenotes-apptips-borland-cppbuilder,  Prev: connector-odbc-usagenotes-apptips-borland-delphi,  Up: connector-odbc-usagenotes-apptips-borland

22.1.7.19 Using Connector/ODBC with C++ Builder
...............................................

Tested with BDE 3.0. The only known problem is that when the table
schema changes, query fields are not updated. BDE, however, does not
seem to recognize primary keys, only the index named `PRIMARY',
although this has not been a problem.


File: manual.info,  Node: connector-odbc-usagenotes-apptips-coldfusion,  Next: connector-odbc-usagenotes-apptips-openoffice,  Prev: connector-odbc-usagenotes-apptips-borland,  Up: connector-odbc-usagenotes-apptips

22.1.7.20 Using Connector/ODBC with ColdFusion
..............................................

The following information is taken from the ColdFusion documentation:

Use the following information to configure ColdFusion Server for Linux
to use the `unixODBC' driver with Connector/ODBC for MySQL data
sources. You can download Connector/ODBC at
`http://dev.mysql.com/downloads/connector/odbc/'.

ColdFusion version 4.5.1 lets you use the ColdFusion Administrator to
add the MySQL data source. However, the driver is not included with
ColdFusion version 4.5.1. Before the MySQL driver appears in the ODBC
data sources drop-down list, build and copy the Connector/ODBC driver to
`/opt/coldfusion/lib/libmyodbc.so'.

The Contrib directory contains the program `mydsn-XXX.zip' which lets
you build and remove the DSN registry file for the Connector/ODBC
driver on ColdFusion applications.

For more information and guides on using ColdFusion and Connector/ODBC,
see the following external sites:

   * Troubleshooting Data Sources and Database Connectivity for Unix
     Platforms
     (http://www.macromedia.com/v1/handlers/index.cfm?ID=11328&Method=Full&PageCall=/support/index.cfm).


File: manual.info,  Node: connector-odbc-usagenotes-apptips-openoffice,  Next: connector-odbc-usagenotes-apptips-sambarserver,  Prev: connector-odbc-usagenotes-apptips-coldfusion,  Up: connector-odbc-usagenotes-apptips

22.1.7.21 Using Connector/ODBC with OpenOffice.org
..................................................

Open Office (`http://www.openoffice.org') How-to: MySQL + OpenOffice
(http://wiki.services.openoffice.org/wiki/Connect_MySQL_and_Base).
How-to: OpenOffice + MyODBC + unixODBC
(http://www.unixodbc.org/doc/OOoMySQL.pdf).


File: manual.info,  Node: connector-odbc-usagenotes-apptips-sambarserver,  Next: connector-odbc-usagenotes-apptips-datajunction,  Prev: connector-odbc-usagenotes-apptips-openoffice,  Up: connector-odbc-usagenotes-apptips

22.1.7.22 Using Connector/ODBC with Sambar Server
.................................................

Sambar Server (`http://www.sambarserver.info') How-to: MyODBC +
SambarServer + MySQL (http://www.sambarserver.info/article.php?sid=66).


File: manual.info,  Node: connector-odbc-usagenotes-apptips-datajunction,  Next: connector-odbc-usagenotes-apptips-vision,  Prev: connector-odbc-usagenotes-apptips-sambarserver,  Up: connector-odbc-usagenotes-apptips

22.1.7.23 Using Connector/ODBC with Pervasive Software DataJunction
...................................................................

You have to change it to output *Note `VARCHAR': char. rather than
*Note `ENUM': enum, as it exports the latter in a manner that causes
MySQL problems.


File: manual.info,  Node: connector-odbc-usagenotes-apptips-vision,  Prev: connector-odbc-usagenotes-apptips-datajunction,  Up: connector-odbc-usagenotes-apptips

22.1.7.24 Using Connector/ODBC with SunSystems Vision
.....................................................

Select the `Return matching rows' option.


File: manual.info,  Node: connector-odbc-errors,  Prev: connector-odbc-usagenotes-apptips,  Up: connector-odbc-usagenotes

22.1.7.25 Connector/ODBC Errors and Resolutions (FAQ)
.....................................................

The following section details some common errors and their suggested
fix or alternative solution. If you are still experiencing problems,
use the Connector/ODBC mailing list; see *Note
connector-odbc-support-community::.

Many problems can be resolved by upgrading your Connector/ODBC drivers
to the latest available release. On Windows, make sure that you have
the latest versions of the Microsoft Data Access Components (MDAC)
installed.

* 64-Bit Windows and ODBC Data Source Administrator *

I have installed Connector/ODBC on Windows XP x64 Edition or Windows
Server 2003 R2 x64. The installation completed successfully, but the
Connector/ODBC driver does not appear in `ODBC Data Source
Administrator'.

This is not a bug, but is related to the way Windows x64 editions
operate with the ODBC driver. On Windows x64 editions, the
Connector/ODBC driver is installed in the `%SystemRoot%\SysWOW64'
folder. However, the default `ODBC Data Source Administrator' that is
available through the `Administrative Tools' or `Control Panel' in
Windows x64 Editions is located in the `%SystemRoot%\system32' folder,
and only searches this folder for ODBC drivers.

On Windows x64 editions, use the ODBC administration tool located at
`%SystemRoot%\SysWOW64\odbcad32.exe', this will correctly locate the
installed Connector/ODBC drivers and enable you to create a
Connector/ODBC DSN.

This issue was originally reported as Bug #20301.

* Error 10061 (Cannot connect to server) *

When connecting or using the `Test' button in `ODBC Data Source
Administrator' I get error 10061 (Cannot connect to server)

This error can be raised by a number of different issues, including
server problems, network problems, and firewall and port blocking
problems. For more information, see *Note can-not-connect-to-server::.

* "Transactions are not enabled" Error *

The following error is reported when using transactions: `Transactions
are not enabled'

This error indicates that you are trying to use transactions with a
MySQL table that does not support transactions. Transactions are
supported within MySQL when using the *Note `InnoDB':
innodb-storage-engine. database engine, which is the default storage
engine in MySQL 5.5 and higher. In versions of MySQL before MySQL 5.1,
you may also use the `BDB' engine.

Check the following before continuing:

   * Verify that your MySQL server supports a transactional database
     engine. Use *Note `SHOW ENGINES': show-engines. to obtain a list
     of the available engine types.

   * Verify that the tables you are updating use a transactional
     database engine.

   * Ensure that you have not enabled the `disable transactions' option
     in your DSN.

* #DELETED# Records Reported by Access *

Access reports records as `#DELETED#' when inserting or updating
records in linked tables.

If the inserted or updated records are shown as `#DELETED#' in Access,
then:

   * If you are using Access 2000, get and install the newest (version
     2.6 or higher) Microsoft MDAC (`Microsoft Data Access Components')
     from `http://support.microsoft.com/kb/110093'. This fixes a bug in
     Access that when you export data to MySQL, the table and column
     names aren't specified.

     Also, get and apply the Microsoft Jet 4.0 Service Pack 5 (SP5),
     which can be found at
     `http://support.microsoft.com/default.aspx?scid=kb;EN-US;q239114'.
     This fixes some cases where columns are marked as `#DELETED#' in
     Access.

   * For all versions of Access, enable the Connector/ODBC `Return
     matching rows' option. For Access 2.0, also enable the `Simulate
     ODBC 1.0' option.

   * Include a `TIMESTAMP' in all tables that you want to be able to
     update.

   * Include a primary key in the table. If not, new or updated rows may
     show up as `#DELETED#'.

   * Use only *Note `DOUBLE': floating-point-types. float fields.
     Access fails when comparing with single-precision floats.  The
     symptom usually is that new or updated rows may show up as
     `#DELETED#' or that you cannot find or update rows.

   * If you are using Connector/ODBC to link to a table that has a
     *Note `BIGINT': integer-types. column, the results are displayed
     as `#DELETED'. The work around solution is:

        * Have one more dummy column with *Note `TIMESTAMP': datetime.
          as the data type.

        * Select the `Change BIGINT columns to INT' option in the
          connection dialog in ODBC DSN Administrator.

        * Delete the table link from Access and re-create it.

     Old records still display as `#DELETED#', but newly added/updated
     records are displayed properly.

* Write Conflicts or Row Location Errors *

How do I handle Write Conflicts or Row Location errors?

If you see the following errors, select the `Return Matching Rows'
option in the DSN configuration dialog, or specify `OPTION=2', as the
connection parameter:

     Write Conflict. Another user has changed your data.

     Row cannot be located for updating. Some values may have been changed
     since it was last read.

* Importing from Access 97 *

Exporting data from Access 97 to MySQL reports a `Syntax Error'.

This error is specific to Access 97 and versions of Connector/ODBC
earlier than 3.51.02. Update to the latest version of the
Connector/ODBC driver to resolve this problem.

* Importing from Microsoft DTS *

Exporting data from Microsoft DTS to MySQL reports a `Syntax Error'.

This error occurs only with MySQL tables using the *Note `TEXT': blob.
or *Note `VARCHAR': char. data types. You can fix this error by
upgrading your Connector/ODBC driver to version 3.51.02 or higher.

* SQL_NO_DATA Exception from ODBC.NET *

Using ODBC.NET with Connector/ODBC, while fetching empty string (0
length), it starts giving the `SQL_NO_DATA' exception.

You can get the patch that addresses this problem from
`http://support.microsoft.com/default.aspx?scid=kb;EN-US;q319243'.

* Error with SELECT COUNT(*) *

Using `SELECT COUNT(*) FROM TBL_NAME' within Visual Basic and ASP
returns an error.

This error occurs because the `COUNT(*)' expression is returning a
*Note `BIGINT': integer-types, and ADO cannot make sense of a number
this big. Select the `Change BIGINT columns to INT' option (option
value 16384).

* Multiple-Step Operation Error *

Using the `AppendChunk()' or `GetChunk()' ADO methods, the
`Multiple-step operation generated errors. Check each status value'
error is returned.

The `GetChunk()' and `AppendChunk()' methods from ADO do not work as
expected when the cursor location is specified as `adUseServer'. On the
other hand, you can overcome this error by using `adUseClient'.

A simple example can be found from
`http://www.dwam.net/iishelp/ado/docs/adomth02_4.htm'

* Modified Record Error *

Access returns `Another user had modified the record that you have
modified' while editing records on a Linked Table.

In most cases, this can be solved by doing one of the following things:

   * Add a primary key for the table if one doesn't exist.

   * Add a timestamp column if one doesn't exist.

   * Only use double-precision float fields. Some programs may fail
     when they compare single-precision floats.

If these strategies do not help, start by making a log file from the
ODBC manager (the log you get when requesting logs from ODBCADMIN) and
a Connector/ODBC log to help you figure out why things go wrong. For
instructions, see *Note connector-odbc-configuration-trace::.

* Direct Application Linking Under Unix or Linux *

When linking an application directly to the Connector/ODBC library
under Unix or Linux, the application crashes.

Connector/ODBC under Unix or Linux is not compatible with direct
application linking. To connect to an ODBC source, use a driver
manager, such as `iODBC' or `unixODBC'.

* Microsoft Office and DATE or TIMESTAMP Columns *

Applications in the Microsoft Office suite cannot update tables that
have *Note `DATE': datetime. or *Note `TIMESTAMP': datetime. columns.

This is a known issue with Connector/ODBC. Ensure that the field has a
default value (rather than `NULL') and that the default value is
nonzero (that is, something other than `0000-00-00 00:00:00').

* INFORMATION_SCHEMA Database *

When connecting Connector/ODBC 5.x to a MySQL 4.x server, the error
`1044 Access denied for user 'xxx'@'%' to database
'information_schema'' is returned.

Connector/ODBC 5.x is designed to work with MySQL 5.0 or later, taking
advantage of the `INFORMATION_SCHEMA' database to determine data
definition information. Support for MySQL 4.1 is planned for the final
release.

* S1T00 Error *

When calling `SQLTables', the error `S1T00' is returned, but I cannot
find this in the list of error numbers for Connector/ODBC.

The `S1T00' error indicates that a general timeout has occurred within
the ODBC system and is not a MySQL error. Typically it indicates that
the connection you are using is stale, the server is too busy to accept
your request or that the server has gone away.

* "Table does not exist" Error in Access 2000 *

When linking to tables in Access 2000 and generating links to tables
programmatically, rather than through the table designer interface, you
may get errors about tables not existing.

There is a known issue with a specific version of the `msjet40.dll'
that exhibits this issue. The version affected is 4.0.9025.0. Reverting
to an older version will enable you to create the links. If you have
recently updated your version, check your `WINDOWS' directory for the
older version of the file and copy it to the drivers directory.

* Batched Statements *

When I try to use batched statements, the execution of the batched
statements fails.

Batched statement support was added in 3.51.18. Support for batched
statements is not enabled by default. Enable option
`FLAG_MULTI_STATEMENTS', value 67108864, or select the `Allow multiple
statements' flag within a GUI configuration.

* Packet Errors with ADODB and Excel *

When connecting to a MySQL server using ADODB and Excel, occasionally
the application fails to communicate with the server and the error `Got
an error reading communication packets' appears in the error log.

This error may be related to Keyboard Logger 1.1 from PanteraSoft.com,
which is known to interfere with the network communication between
MySQL Connector/ODBC and MySQL.

* Outer Join Error *

When using some applications to access a MySQL server using
Connector/ODBC and outer joins, an error is reported regarding the
Outer Join Escape Sequence.

This is a known issue with MySQL Connector/ODBC which is not correctly
parsing the "Outer Join Escape Sequence", as per the specs at Microsoft
ODBC Specs (http://msdn2.microsoft.com/en-us/library/ms710299.aspx).
Currently, Connector/ODBC will return a value > 0 when asked for
`SQL_OJ_CAPABILITIES' even though no parsing takes place in the driver
to handle the outer join escape sequence.

* Hebrew/CJK Characters *

I can correctly store extended characters in the database (Hebrew/CJK)
using Connector/ODBC 5.1, but when I retrieve the data, the text is not
formatted correctly and I get garbled characters.

When using ASP and UTF8 characters, add the following to your ASP files
to ensure that the data returned is correctly encoded:

     Response.CodePage = 65001
     Response.CharSet = "utf-8"

* Duplicate Entry in Installed Programs List *

I have a duplicate MySQL Connector/ODBC entry within my `Installed
Programs' list, but I cannot delete one of them.

This problem can occur when you upgrade an existing Connector/ODBC
installation, rather than removing and then installing the updated
version.

*Warning*:

To fix the problem, use any working uninstallers to remove existing
installations; then may have to edit the contents of the registry. Make
sure you have a backup of your registry information before attempting
any editing of the registry contents.

* Values Truncated to 255 Characters *

When submitting queries with parameter binding using *Note `UPDATE':
update, my field values are being truncated to 255 characters.

Ensure that the `FLAG_BIG_PACKETS' option is set for your connection.
This removes the 255 character limitation on bound parameters.

* Disabling Data-At-Execution *

Is it possible to disable data-at-execution using a flag?

If you do not want to use data-at-execution, remove the corresponding
calls. For example:

     SQLLEN ylen = SQL_LEN_DATA_AT_EXEC(10);
     SQLBindCol(hstmt,2,SQL_C_BINARY, buf, 10, &ylen);

Would become:

     SQLBindCol(hstmt,2,SQL_C_BINARY, buf, 10, NULL);

Note that in the call to `SQLBindCol()', &ylen has been replaced by
NULL.

For further information, refer to the MSDN documentation
(http://msdn.microsoft.com/en-us/library/ms711010(VS.85).aspx) for
`SQLBindCol()'.

* NULLABLE Attribute for AUTO_INCREMENT Columns *

When you call `SQLColumns()' for a table column that is
`AUTO_INCREMENT', the `NULLABLE' column of the result set is always
`SQL_NULLABLE (1)'.

This is because MySQL reports the `DEFAULT' value for such a column as
`NULL'. It means, if you insert a `NULL' value into the column, you
will get the next integer value for the table's `auto_increment'
counter.


File: manual.info,  Node: connector-odbc-support,  Prev: connector-odbc-usagenotes,  Up: connector-odbc

22.1.8 Connector/ODBC Support
-----------------------------

* Menu:

* connector-odbc-support-community::  Connector/ODBC Community Support
* connector-odbc-support-bug-report::  How to Report Connector/ODBC Problems or Bugs
* connector-odbc-support-patch-submission::  How to Submit a Connector/ODBC Patch

There are many different places where you can get support for using
Connector/ODBC. Always try the Connector/ODBC Mailing List or
Connector/ODBC Forum. See *Note connector-odbc-support-community::, for
help before reporting a specific bug or issue to MySQL.


File: manual.info,  Node: connector-odbc-support-community,  Next: connector-odbc-support-bug-report,  Prev: connector-odbc-support,  Up: connector-odbc-support

22.1.8.1 Connector/ODBC Community Support
.........................................

Oracle provides assistance to the user community by means of its
mailing lists. For Connector/ODBC-related issues, you can get help from
experienced users by using the <myodbc@lists.mysql.com> mailing list.
Archives are available online at `http://lists.mysql.com/myodbc'.

For information about subscribing to MySQL mailing lists or to browse
list archives, visit `http://lists.mysql.com/'. See *Note
mailing-lists::.

Community support from experienced users is also available through the
ODBC Forum (http://forums.mysql.com/list.php?37). You may also find
help from other users in the other MySQL Forums, located at
`http://forums.mysql.com'. See *Note forums::.


File: manual.info,  Node: connector-odbc-support-bug-report,  Next: connector-odbc-support-patch-submission,  Prev: connector-odbc-support-community,  Up: connector-odbc-support

22.1.8.2 How to Report Connector/ODBC Problems or Bugs
......................................................

If you encounter difficulties or problems with Connector/ODBC, start by
making a log file from the `ODBC Manager' (the log you get when
requesting logs from `ODBC ADMIN') and Connector/ODBC. The procedure
for doing this is described in *Note
connector-odbc-configuration-trace::.

Check the Connector/ODBC trace file to find out what could be wrong.
Determine what statements were issued by searching for the string
`>mysql_real_query' in the `myodbc.log' file.

Also, try issuing the statements from the *Note `mysql': mysql. client
program or from `admndemo'. This helps you determine whether the error
is in Connector/ODBC or MySQL.

If you find out something is wrong, please only send the relevant rows
(maximum 40 rows) to the `myodbc' mailing list. See *Note
mailing-lists::. Please never send the whole Connector/ODBC or ODBC log
file!

Ideally, include the following information with the email:

   * Operating system and version

   * Connector/ODBC version

   * ODBC Driver Manager type and version

   * MySQL server version

   * ODBC trace from Driver Manager

   * Connector/ODBC log file from Connector/ODBC driver

   * Simple reproducible sample

Remember that the more information you can supply to us, the more
likely it is that we can fix the problem!

Also, before posting the bug, check the MyODBC mailing list archive at
`http://lists.mysql.com/myodbc'.

If you are unable to find out what is wrong, the last option is to
create an archive in `tar' or `zip' format that contains a
Connector/ODBC trace file, the ODBC log file, and a `README' file that
explains the problem. Initiate a bug report for our bugs database at
`http://bugs.mysql.com/', then click the Files tab in the bug report
for instructions on uploading the archive to the bugs database. Only
MySQL engineers have access to the files you upload, and we are very
discreet with the data.

If you can create a program that also demonstrates the problem, please
include it in the archive as well.

If the program works with another SQL server, include an ODBC log file
where you perform exactly the same SQL statements so that we can
compare the results between the two systems.

Remember that the more information you can supply to us, the more
likely it is that we can fix the problem.


File: manual.info,  Node: connector-odbc-support-patch-submission,  Prev: connector-odbc-support-bug-report,  Up: connector-odbc-support

22.1.8.3 How to Submit a Connector/ODBC Patch
.............................................

You can send a patch or suggest a better solution for any existing code
or problems by sending a mail message to <myodbc@lists.mysql.com>.


File: manual.info,  Node: connector-net,  Next: connector-j,  Prev: connector-odbc,  Up: connectors-apis

22.2 MySQL Connector/Net
========================

* Menu:

* connector-net-versions::       Connector/Net Versions
* connector-net-installation::   Connector/Net Installation
* connector-net-visual-studio::  Connector/Net Visual Studio Integration
* connector-net-tutorials::      Connector/Net Tutorials
* connector-net-programming::    Connector/Net Programming
* connector-net-connection-options::  Connector/Net Connection String Options Reference
* connector-net-rt::             Connector/Net Support for Windows Store
* connector-net-entityframework50::  EF 5 Support
* connector-net-ref::            Connector/Net API Reference
* connector-net-support::        Connector/Net Support
* connector-net-faq::            Connector/Net FAQ

Connector/Net lets you easily develop .NET applications that require
secure, high-performance data connectivity with MySQL. It implements
the required ADO.NET interfaces and integrates into ADO.NET-aware
tools. Developers can build applications using their choice of .NET
languages. Connector/Net is a fully managed ADO.NET driver written in
100% pure C#. It does not use the MySQL C client library.

For release notes detailing the changes in each release of
Connector/Net, see MySQL Connector/Net Release Notes
(http://dev.mysql.com/doc/relnotes/connector-net/en/).

Connector/Net includes full support for:

   * Features provided by MySQL Server up to and including MySQL Server
     5.7.

   * Large-packet support for sending and receiving rows and *Note
     `BLOB': blob. values up to 2 gigabytes in size.

   * Protocol compression, which enables compressing the data stream
     between the client and server.

   * Connections using TCP/IP sockets, named pipes, or shared memory on
     Windows.

   * Connections using TCP/IP sockets or Unix sockets on Unix.

   * The Open Source Mono framework developed by Novell.

   * Microsoft Entity Framework.

   * Microsoft Windows RT.

This document is intended as a user's guide to Connector/Net and
includes a full syntax reference. Syntax information is also included
within the `MySql.Data.chm' file included with the Connector/Net
distribution.

If you are using MySQL 5.0 or later, and Visual Studio as your
development environment, you can also use the MySQL Visual Studio
Plugin. The plugin acts as a DDEX (Data Designer Extensibility)
provider: you can use the data design tools within Visual Studio to
manipulate the schema and objects within a MySQL database. For more
information, see *Note connector-net-visual-studio::.

*Note*:

From Connector/Net 5.1 through 6.6, the Visual Studio Plugin is part of
the main Connector/Net package. Starting with 6.7, the Visual Studio
Plugin has been separated out into it's own product.  The MySQL for
Visual Studio Plugin release notes can be found at MySQL Connector/Net
Release Notes (http://dev.mysql.com/doc/relnotes/connector-net/en/).

MySQL Connector/Net supports full versions of Visual Studio 2008, 2010,
and 2012, although the extent of support may be limited depending on
your versions of MySQL Connector/Net and Visual Studio. For details, see
*Note connector-net-visual-studio::.

MySQL Connector/Net does not support Express versions of Microsoft
products, including Microsoft Visual Web Developer.

* Key Topics *

   * For connection string properties when using the MySqlConnection
     class, see *Note connector-net-connection-options::.


File: manual.info,  Node: connector-net-versions,  Next: connector-net-installation,  Prev: connector-net,  Up: connector-net

22.2.1 Connector/Net Versions
-----------------------------

There are several versions of Connector/Net available:

   * Connector/Net 6.7 includes support for MySQL 5.7, 5.6, 5.5, 5.1,
     and 5.0. Important new features include Entity Framework 5
     support, Built-in Load Balancing (to be used with a backend
     implementing either MySQL Replication or MySQL Clustering), a
     Memcached client (compatible with Innodb Memcached plugin) and
     support for Windows Runtime (WinRT) to write store apps. This
     version also removes all features related to Visual Studio
     Integration, which are provided in a separate product, MySQL for
     Visual Studio.

   * Connector/Net 6.6 includes support for MySQL Server 5.7, 5.6, 5.5,
     5.1, and 5.0. Important new features include stored procedure
     debugging in Microsoft Visual Studio, support for pluggable
     authentication including the ability to write your own
     authentication plugins, Entity Framework 4.3 Code First support,
     and enhancements to partial trust support to allow hosting
     services to deploy applications without installing the
     Connector/Net library in the GAC.

   * Connector/Net 6.5 includes support for MySQL Server 5.7, 5.6, 5.5,
     5.1, and 5.0. Important new features include interceptor classes
     for exceptions and commands, support for the MySQL 5.6 fractional
     seconds feature, better partial-trust support, and better
     IntelliSense, including auto-completion when editing stored
     procedures or `.mysql' files.

   * Connector/Net 6.4 includes support for MySQL Server 5.6, 5.5, 5.1,
     and 5.0. Important new features include support for Windows
     authentication (when connecting to MySQL Server 5.5+), table
     caching on the client side, simple connection fail-over support,
     and improved SQL generation from the Entity Framework provider.

     This version of Connector/Net is no longer supported.

   * Connector/Net 6.3 includes support for MySQL Server 5.6, 5.5, 5.1,
     and 5.0. Important new features include integration with Visual
     Studio 2010, such as availability of DDL T4 template for Entity
     Framework, and a custom MySQL SQL Editor. Other features include
     refactored transaction scope: Connector/Net now supports nested
     transactions in a scope where they use the same connection string.

     This version of Connector/Net is no longer supported.

   * Connector/Net 6.2 includes support for MySQL Server 5.6, 5.5, 5.1,
     5.0, and 4.1. Important new features include a new logging system
     and client SSL certificates.

     This version of Connector/Net is no longer supported.

   * Connector/Net 6.1 includes support for MySQL Server 5.6, 5.5, 5.1,
     5.0, and 4.1. Important new features include the MySQL Website
     Configuration Tool and a Session State Provider.

     This version of Connector/Net is no longer supported.

   * Connector/Net 6.0 includes support for MySQL Server 5.5, 5.1, 5.0,
     and 4.1.

     This version of Connector/Net is no longer supported.

   * Connector/Net 5.2 includes support for MySQL Server 5.5, 5.1, 5.0,
     and 4.1 features. Connector/Net 5.2 also includes support for a
     new membership/role provider, Compact Framework 2.0, a new stored
     procedure parser and improvements to `GetSchema'. Connector/Net
     5.2 also includes the Visual Studio Plugin as a standard
     installable component.

     This version of Connector/Net is no longer supported.

   * Connector/Net 5.1 includes support for MySQL Server 5.5, 5.1, 5.0,
     4.1, and 4.0 features. Connector/Net 5.1 also includes support for
     a new membership/role provider, Compact Framework 2.0, a new
     stored procedure parser and improvements to `GetSchema'.
     Connector/Net 5.1 also includes the Visual Studio Plugin as a
     standard installable component.

     This version of Connector/Net is no longer supported.

   * Connector/Net 5.0 includes support for MySQL Server 5.1, 5.0, 4.1,
     and 4.0 features. Connector/Net 5.0 also includes full support for
     the ADO.Net 2.0 interfaces and subclasses, includes support for
     the usage advisor and performance monitor (PerfMon) hooks.

     This version of Connector/Net is no longer supported.

   * Connector/Net 1.0 includes support for MySQL Server 5.0, 4.1, and
     4.0 features, and full compatibility with the ADO.NET driver
     interface.

     This version of Connector/Net is no longer supported.

The following table shows the .NET Framework version required, and the
MySQL Server version supported by Connector/Net:

*Connector/Net Requirements for Related Products*

Connector/Net      ADO.NET version    .NET Framework     MySQL Server       Currently
version            supported          version required   version supported  supported
6.7                2.x+               2.x+ for VS 2008,  5.7, 5.6, 5.5,     Yes
                                      4.x+ for VS 2010   5.1, 5.0           
                                      / VS 2012, .NET                       
                                      RT for VS 2012                        
6.6                2.x+               2.x+ for VS 2008,  5.7, 5.6, 5.5,     Yes
                                      4.x+ for VS 2010   5.1, 5.0           
                                      / VS 2012                             
6.5                2.x+               2.x+ for VS 2008,  5.7, 5.6, 5.5,     Yes
                                      4.x+ for VS 2010   5.1, 5.0           
6.4                2.x+               2.x+, 4.x+ for VS  5.6, 5.5, 5.1, 5.0 No
                                      2010                                  
6.3                2.x+               2.x+, 4.x+ for VS  5.6, 5.5, 5.1, 5.0 No
                                      2010                                  
6.2                2.x+               2.x+               5.6, 5.5, 5.1,     No
                                                         5.0, 4.1           
6.1                2.x+               2.x+               5.6, 5.5, 5.1,     No
                                                         5.0, 4.1           
6.0                2.x+               2.x+               5.5, 5.1, 5.0, 4.1 No
5.2                2.x+               2.x+               5.5, 5.1, 5.0, 4.1 No
5.1                2.x+               2.x+               5.5, 5.1, 5.0,     No
                                                         4.1, 4.0           
5.0                2.x+               2.x+               5.0, 4.1, 4.0      No
1.0                1.x                1.x                5.0, 4.1, 4.0      No

*Note*:

Version numbers for MySQL products are formatted as X.Y.Z, where Z=0
indicates alpha, Z=1 indicates beta, and Z>=2 indicates GA.  However,
Windows tools (Control Panel, properties display) may show the version
numbers as XX.YY.ZZ. For example, the official MySQL formatted version
number 5.0.9 may be displayed by Windows tools as 5.00.09. The two
versions are the same; only the number display format is different.


File: manual.info,  Node: connector-net-installation,  Next: connector-net-visual-studio,  Prev: connector-net-versions,  Up: connector-net

22.2.2 Connector/Net Installation
---------------------------------

* Menu:

* connector-net-installation-windows::  Installing Connector/Net on Windows
* connector-net-installation-unix::  Installing Connector/Net on Unix with Mono
* connector-net-installation-source::  Installing Connector/Net from the Source Code

Connector/Net runs on any platform that supports the .NET framework.
The .NET framework is primarily supported on recent versions of
Microsoft Windows, and is supported on Linux through the Open Source
Mono framework (see `http://www.mono-project.com').

Connector/Net is available for download from
`http://dev.mysql.com/downloads/connector/net/'.


File: manual.info,  Node: connector-net-installation-windows,  Next: connector-net-installation-unix,  Prev: connector-net-installation,  Up: connector-net-installation

22.2.2.1 Installing Connector/Net on Windows
............................................

* Menu:

* connector-net-installation-binary-windows-installer::  Installing Connector/Net Using the Installer
* connector-net-installation-binary-windows-zip::  Installing Connector/Net Using the Zip Packages

On Windows, you can install either through a binary installation
process or by downloading a zip file with the Connector/Net components.

Before installing, ensure that your system is up to date, including
installing the latest version of the .NET Framework.


File: manual.info,  Node: connector-net-installation-binary-windows-installer,  Next: connector-net-installation-binary-windows-zip,  Prev: connector-net-installation-windows,  Up: connector-net-installation-windows

22.2.2.2 Installing Connector/Net Using the Installer
.....................................................

Using the installer is the most straightforward method of installing
Connector/Net on Windows and the installed components include the
source code, test code and full reference documentation.

You install Connector/Net through a Windows Installer (`.msi')
installation package, which can install Connector/Net on all Windows
operating systems. The MSI package is contained within a zip archive
named `mysql-connector-net-VERSION.zip', where VERSION indicates the
Connector/Net version.

To install Connector/Net:

  1. Double-click the MSI installer file extracted from the zip you
     downloaded. Click `Next' to start the installation.

     Connector/Net Windows Installer - Welcome

  2. You must choose the type of installation to perform.

     Connector/Net Windows Installer - Installation type

     For most situations, the Typical installation is suitable.  Click
     the `Typical' button and proceed to Step 5. A Complete
     installation installs all the available files. To conduct a
     Complete installation, click the `Complete' button and proceed to
     step 5. To customize your installation, including choosing the
     components to install and some installation options, click the
     `Custom' button and proceed to Step 3.

     The Connector/Net installer will register the connector within the
     Global Assembly Cache (GAC) - this will make the Connector/Net
     component available to all applications, not just those where you
     explicitly reference the Connector/Net component. The installer
     will also create the necessary links in the Start menu to the
     documentation and release notes.

  3. If you have chosen a custom installation, you can select the
     individual components to install, including the core interface
     component, supporting documentation (a CHM file) samples and
     examples, and the source code. Select the items, and their
     installation level, and then click `Next' to continue the
     installation.

     *Note*:

     For Connector/Net 1.0.8 or lower and Connector 5.0.4 and lower the
     installer will attempt to install binaries for both 1.x and 2.x of
     the .NET Framework. If you only have one version of the framework
     installed, the connector installation may fail. If this happens,
     you can choose the framework version to be installed through the
     custom installation step.

     Connector/Net Windows Installer - Custom setup

  4. You will be given a final opportunity to confirm the installation.
     Click `Install' to copy and install the files onto your machine.

     Connector/Net Windows Installer - Confirming installation

  5. Once the installation has been completed, click `Finish' to exit
     the installer.

     Connector/Net Windows Installer - Finish installation

Unless you choose otherwise, Connector/Net is installed in `C:\Program
Files\MySQL\MySQL Connector Net X.X.X', where X.X.X is replaced with
the version of Connector/Net you are installing. New installations do
not overwrite existing versions of Connector/Net.

Depending on your installation type, the installed components will
include some or all of the following components:

   * `bin': Connector/Net MySQL libraries for different versions of the
     .NET environment.

   * `docs': Connector/Net documentation in CHM format.

   * `samples': Sample code and applications that use the Connector/Net
     component.

   * `src': The source code for the Connector/Net component.

You may also use the `/quiet' or `/q' command-line option with the
`msiexec' tool to install the Connector/Net package automatically
(using the default options) with no notification to the user. Using
this method the user cannot select options. Additionally, no prompts,
messages or dialog boxes will be displayed.

     C:\> msiexec /package connector-net.msi /quiet

To provide a progress bar to the user during automatic installation,
use the `/passive' option.


File: manual.info,  Node: connector-net-installation-binary-windows-zip,  Prev: connector-net-installation-binary-windows-installer,  Up: connector-net-installation-windows

22.2.2.3 Installing Connector/Net Using the Zip Packages
........................................................

If you have problems running the installer, you can download a zip file
without an installer as an alternative. That file is called
`mysql-connector-net-VERSION-noinstall.zip'.  After downloading the zip
archive, extract the files to a location of your choice.

The file contains the following directories:

   * `bin': Connector/Net MySQL libraries for different versions of the
     .NET environment.

   * `Docs': Connector/Net documentation in CHM format.

   * `Samples': Sample code and applications that use the Connector/Net
     component.

Connector/Net 6.0.x has a different directory structure:

   * `Assemblies': A collection of DLLs that make up the connector
     functionality.

   * `Documentation': Connector/Net documentation in CHM format.

   * `Samples': sample code and applications that use the Connector/Net
     component.

Another zip file available for download contains the source code
distribution. This file is named `mysql-connector-net-VERSION-src.zip'.

The file contains the following directories:

   * `Documentation': Source files to build the documentation into the
     compiled HTML (CHM) format.

   * `Installer': Source files to build the Connector/Net installer
     program.

   * `MySql.Data': Source files for the core data provider.

   * `MySql.VisualStudio': Source files for the Microsoft Visual Studio
     extensions.

   * `MySql.Web': Source files for the web providers. This includes
     code for the membership provider, role provider and profile
     provider. These are used in ASP.NET web sites.

   * `Samples': Source files for several example applications.

   * `Tests': A spreadsheet listing test cases.

   * `VisualStudio': Resources used by the Visual Studio plugin.

Finally, ensure that `MySql.Data.dll' is accessible to your program at
build time (and runtime). If using Microsoft Visual Studio, add
`MySql.Data' as a Reference to your project.

*Note*:

If using MySQL Connector/Net 6.3.5 and above, the `MySql.Data.dll' file
provided will work with both .NET Framework 2.x and 4.x.


File: manual.info,  Node: connector-net-installation-unix,  Next: connector-net-installation-source,  Prev: connector-net-installation-windows,  Up: connector-net-installation

22.2.2.4 Installing Connector/Net on Unix with Mono
...................................................

There is no installer available for installing the Connector/Net
component on your Unix installation. Before installing, ensure that you
have a working Mono project installation. To test whether your system
has Mono installed, enter:

     shell> mono --version

The version of the Mono JIT compiler is displayed.

To compile C# source code, make sure a Mono C# compiler is installed.
Note that there are two Mono C# compilers available, `mcs', which
accesses the 1.0-profile libraries, and `gmcs', which accesses the
2.0-profile libraries.

To install Connector/Net on Unix/Mono:

  1. Download the `mysql-connector-net-VERSION-noinstall.zip' and
     extract the contents to a directory of your choice, for example:
     `~/connector-net/'.

  2. In the directory where you unzipped the connector to, change into
     the `bin' subdirectory. Ensure the file `MySql.Data.dll' is
     present. This filename is case-sensitive.

  3. You must register the Connector/Net component, `MySql.Data', in
     the Global Assembly Cache (GAC). In the current directory enter the
     `gacutil' command:

          root-shell> gacutil /i MySql.Data.dll

     This will register `MySql.Data' into the GAC.  You can check this
     by listing the contents of `/usr/lib/mono/gac', where you will find
     `MySql.Data' if the registration has been successful.

You are now ready to compile your application. You must ensure that
when you compile your application you include the Connector/Net
component using the `-r:' command-line option. For example:

     shell> gmcs -r:System.dll -r:System.Data.dll -r:MySql.Data.dll HelloWorld.cs

Note, the assemblies that are referenced depend on the requirements of
the application, but applications using Connector/Net must provide
`-r:MySql.Data' as a minimum.

You can further check your installation by running the compiled
program, for example:

     shell> mono HelloWorld.exe


File: manual.info,  Node: connector-net-installation-source,  Prev: connector-net-installation-unix,  Up: connector-net-installation

22.2.2.5 Installing Connector/Net from the Source Code
......................................................

Source packages of Connector/Net are available for download from
`http://dev.mysql.com/downloads/connector/net/'.

* Building the Source Code on Windows *

The following procedure can be used to build the connector on Microsoft
Windows.

   * Navigate to the root of the source code tree.

   * A Microsoft Visual Studio solution file named `MySqlClient.sln' is
     available to build the connector. Click this file to load the
     solution into Visual Studio.

     `MySqlClient.sln' must be compiled with VS 2008, VS 2010, or VS
     2012. Also, depending on the version, the dependencies to build it
     include Visual Studio SDK, NUnit, Entity Framework, and ANTLR
     Integration for Visual Studio.

   * Select `Build', `Build Solution' from the main menu to build the
     solution.

* Building the Source Code on Unix *

Support for building Connector/Net on Mono/Unix is currently not
available.


File: manual.info,  Node: connector-net-visual-studio,  Next: connector-net-tutorials,  Prev: connector-net-installation,  Up: connector-net

22.2.3 Connector/Net Visual Studio Integration
----------------------------------------------

* Menu:

* connector-net-visual-studio-making-a-connection::  Making a Connection
* connector-net-visual-studio-intellisense::  Using IntelliSense in the SQL Editor
* connector-net-visual-studio-editing-tables::  Editing Tables
* connector-net-visual-studio-editing-views::  Editing Views
* connector-net-visual-studio-editing-stored-procedures-and-functions::  Editing Stored Procedures and Functions
* connector-net-visual-studio-editing-triggers::  Editing Triggers
* connector-net-visual-studio-editing-user-defined-functions-udf::  Editing User Defined Functions (UDF)
* connector-net-visual-studio-debugger::  Debugging Stored Procedures and Functions
* connector-net-visual-studio-cloning-database-objects::  Cloning Database Objects
* connector-net-visual-studio-dropping-database-objects::  Dropping Database Objects
* connector-net-visual-studio-entity-framework::  Using the ADO.NET Entity Framework
* connector-net-website-config::  MySQL Website Configuration Tool
* connector-net-sql-editor::     MySQL SQL Editor
* connector-net-ddl-t4-ef::      DDL T4 Template Macro

When MySQL Connector/Net is installed on Microsoft Windows, Visual
Studio integration components are also installed and initialized. This
enables the developer to work seamlessly with MySQL Connector/Net in
the familiar Visual Studio environment, as described in the following
sections of the manual.

MySQL Connector/Net supports full versions of Visual Studio 2008, 2010,
and 2012, although the extent of support may be limited depending on
your versions of MySQL Connector/Net and Visual Studio:

   * Visual Studio 2012 is supported by MySQL Connector/Net 6.6 and up.

   * Full integration with Visual Studio 2010 is available only with
     MySQL Connector/Net 6.3.2 and up, although applications using
     earlier versions of the connector can be built with the Visual
     Studio 2010 environment using .NET 2.x frameworks.

   * Visual Studio 2005 is supported only through MySQL Connector/Net
     6.4.

MySQL Connector/Net does not currently support Express versions of
Microsoft products, including Microsoft Visual Web Developer.

Visual Studio 2010 support was introduced with MySQL Connector/Net
6.3.2. From version 6.3.2 the connector ships with both .NET 2.x and
.NET 4.x versions of the entity framework support files,
`mysql.data.ef.dll' and `mysql.visualstudio.dll'. The .NET 4.x versions
are required to enable new integration features supported in Visual
Studio 2010, including:

   * New DDL T4 template for the Entity Framework (EF) - This enables
     developers to design an EF model from scratch and use the native
     Visual Studio 2010 facility to generate MySQL DDL from that model.
     This is done by creating the model, and with the model open,
     choosing the SSDLToMySQL template in the properties window. The
     correct DDL is then generated. The developer can then save this
     code as a `.mysql' file in their project and execute it against
     the MySQL server.

   * New SQL Editor - A new SQL editor lets you connect to a MySQL
     server to execute SQL. This is activated by creating a new file
     with a `.mysql' extension. A new template lets you create files
     with this file type using the Visual Studio 2010 main menu item
     `File', `New'. Note that the MySQL SQL Editor is also available in
     Visual Studio 2005 and 2008.

As of Connector/Net 5.1.2, the Visual Studio Plugin is part of the main
Connector/Net package. The Visual Studio Plugin release notes can be
found at MySQL Connector/Net Release Notes
(http://dev.mysql.com/doc/relnotes/connector-net/en/).


File: manual.info,  Node: connector-net-visual-studio-making-a-connection,  Next: connector-net-visual-studio-intellisense,  Prev: connector-net-visual-studio,  Up: connector-net-visual-studio

22.2.3.1 Making a Connection
............................

Once the connector is installed, you can use it to create, modify, and
delete connections to MySQL databases. To create a connection with a
MySQL database, perform the following steps:

   * Start Visual Studio, and open the Server Explorer window (`View',
     `Server Explorer' option in the main Visual Studio menu, or
     `Control+W', `L' keyboard shortcuts).

   * Right-click the Data Connections node, and choose the `Add
     Connection...' menu item.

   * Add Connection dialog opens. Press the `Change' button to choose
     MySQL Database as a data source.

     FIGURE GOES HERE: Add Connection Context Menu

   * `Change Data Source' dialog opens. Choose `MySQL Database' in the
     list of data sources (or the `<other>' option, if MySQL Database
     is absent), and then choose `.NET Framework Data Provider for
     MySQL' in the combo box of data providers.

     FIGURE GOES HERE: Choose Data Source

   * Input the connection settings: the server host name (for example,
     localhost if the MySQL server is installed on the local machine),
     the user name, the password, and the default schema name. Note
     that you must specify the default schema name to open the
     connection.

     FIGURE GOES HERE: Add Connection Dialog

   * You can also set the port to connect with the MySQL server by
     pressing the `Advanced' button. To test connection with the MySQL
     server, set the server host name, the user name, and the password,
     and press the `Test Connection' button. If the test succeeds, the
     success confirmation dialog opens.

   * After you set all settings and test the connection, press `OK'.
     The newly created connection is displayed in Server Explorer. Now
     you can work with the MySQL server through standard Server
     Explorer GUI.

     FIGURE GOES HERE: New Data Connection

After the connection is successfully established, all settings are
saved for future use. When you start Visual Studio for the next time,
open the connection node in Server Explorer to establish a connection
to the MySQL server again.

To modify and delete a connection, use the Server Explorer context menu
for the corresponding node. You can modify any of the settings by
overwriting the existing values with new ones. Note that the connection
may be modified or deleted only if no active editor for its objects is
opened: otherwise, you may lose your data.


File: manual.info,  Node: connector-net-visual-studio-intellisense,  Next: connector-net-visual-studio-editing-tables,  Prev: connector-net-visual-studio-making-a-connection,  Up: connector-net-visual-studio

22.2.3.2 Using IntelliSense in the SQL Editor
.............................................

IntelliSense support is available starting in Connector/Net 6.5.  Once
you have established a connection, for example, using the `Connect to
MySql' toolbar button, you can get autocompletion as you type, or by
pressing `Control+J'. Depending on the context, the autocompletion
dialog can show the list of available tables, table columns, or stored
procedures (with the routine's signature as a tooltip). Typing some
characters before pressing `Control+J' filters the choices to those
items starting with that prefix.


File: manual.info,  Node: connector-net-visual-studio-editing-tables,  Next: connector-net-visual-studio-editing-views,  Prev: connector-net-visual-studio-intellisense,  Up: connector-net-visual-studio

22.2.3.3 Editing Tables
.......................

* Menu:

* connector-net-visual-studio-editing-tables-column-editor::  Column Editor
* connector-net-visual-studio-editing-tables-indexes::  Editing Indexes
* connector-net-visual-studio-editing-tables-foreign-keys::  Editing Foreign Keys
* connector-net-visual-studio-editing-tables-column-details::  Column Properties
* connector-net-visual-studio-editing-tables-table-properties::  Table Properties

Connector/Net contains a table editor, which enables the visual
creation and modification of tables.

The Table Designer can be accessed through a mouse action on table-type
node of Server Explorer. To create a new table, right-click the
`Tables' node (under the connection node) and choose the `Create Table'
command from the context menu.

To modify an existing table, double-click the node of the table to
modify, or right-click this node and choose the `Design' item from the
context menu. Either of the commands opens the Table Designer.

The table editor is implemented in the manner of the well-known Query
Browser Table Editor, but with minor differences.

FIGURE GOES HERE: Editing New Table

Table Designer consists of the following parts:

   * Columns Editor - a data grid on top of the Table Designer. Use the
     Columns grid for column creation, modification, and deletion.

   * Indexes tab - a tab on bottom of the Table Designer. Use the
     Indexes tab for indexes management.

   * Foreign Keys tab - a tab on bottom of the Table Designer. Use the
     Foreign Keys tab for foreign keys management.

   * Column Details tab - a tab on bottom of the Table Designer.  Use
     the Column Details tab to set advanced column options.

   * Properties window - a standard Visual Studio Properties window,
     where the properties of the edited table are displayed. Use the
     Properties window to set the table properties.

Each of these areas is discussed in more detail in subsequent sections.

To save changes you have made in the Table Designer, use either `Save'
or `Save All' button of the Visual Studio main toolbar, or press
`Control+S'. If you have not already named the table, you will be
prompted to do so.

FIGURE GOES HERE: Choose Table Name

Once the table is created, you can view it in the Server Explorer.

FIGURE GOES HERE: Newly Created Table

The Table Designer main menu lets you set a primary key column, edit
relationships such as foreign keys, and create indexes.

FIGURE GOES HERE: Table Designer Main Menu


File: manual.info,  Node: connector-net-visual-studio-editing-tables-column-editor,  Next: connector-net-visual-studio-editing-tables-indexes,  Prev: connector-net-visual-studio-editing-tables,  Up: connector-net-visual-studio-editing-tables

22.2.3.4 Column Editor
......................

You can use the Column Editor to set or change the name, data type,
default value, and other properties of a table column. To set the focus
to a needed cell of a grid, use the mouse click.  Also you can move
through the grid using `Tab' and `Shift'+`Tab' keys.

To set or change the name, data type, default value and comment of a
column, activate the appropriate cell and type the desired value.

To set or unset flag-type column properties (`NOT NULL', auto
incremented, flags), check or uncheck the corresponding check boxes.
Note that the set of column flags depends on its data type.

To reorder columns, index columns or foreign key columns in the Column
Editor, select the whole column to reorder by clicking the selector
column on the left of the column grid. Then move the column by using
`Control+Up' (to move the column up) or `Control+Down' (to move the
column down) keys.

To delete a column, select it by clicking the selector column on the
left of the column grid, then press the `Delete' button on a keyboard.


File: manual.info,  Node: connector-net-visual-studio-editing-tables-indexes,  Next: connector-net-visual-studio-editing-tables-foreign-keys,  Prev: connector-net-visual-studio-editing-tables-column-editor,  Up: connector-net-visual-studio-editing-tables

22.2.3.5 Editing Indexes
........................

Indexes management is performed using the `Indexes/Keys' dialog.

To add an index, select `Table Designer', `Indexes/Keys...' from the
main menu, and click `Add' to add a new index. You can then set the
index name, index kind, index type, and a set of index columns.

FIGURE GOES HERE: Indexes Dialog

To remove an index, select it in the list box on the left, and click
the `Delete' button.

To change index settings, select the needed index in the list box on
the left. The detailed information about the index is displayed in the
panel on the right hand side. Change the desired values.


File: manual.info,  Node: connector-net-visual-studio-editing-tables-foreign-keys,  Next: connector-net-visual-studio-editing-tables-column-details,  Prev: connector-net-visual-studio-editing-tables-indexes,  Up: connector-net-visual-studio-editing-tables

22.2.3.6 Editing Foreign Keys
.............................

You manage foreign keys for *Note `InnoDB': innodb-storage-engine.
tables using the `Foreign Key Relationships' dialog.

To add a foreign key, select `Table Designer', `Relationships...' from
the main menu. This displays the `Foreign Key Relationship' dialog.
Click `Add'. You can then set the foreign key name, referenced table
name, foreign key columns, and actions upon update and delete.

To remove a foreign key, select it in the list box on the left, and
click the `Delete' button.

To change foreign key settings, select the required foreign key in the
list box on the left. The detailed information about the foreign key is
displayed in the right hand panel. Change the desired values.

FIGURE GOES HERE: Foreign Key Relationships Dialog


File: manual.info,  Node: connector-net-visual-studio-editing-tables-column-details,  Next: connector-net-visual-studio-editing-tables-table-properties,  Prev: connector-net-visual-studio-editing-tables-foreign-keys,  Up: connector-net-visual-studio-editing-tables

22.2.3.7 Column Properties
..........................

The `Column Properties' tab can be used to set column options. In
addition to the general column properties presented in the Column
Editor, in the `Column Properties' tab you can set additional
properties such as Character Set, Collation and Precision.


File: manual.info,  Node: connector-net-visual-studio-editing-tables-table-properties,  Prev: connector-net-visual-studio-editing-tables-column-details,  Up: connector-net-visual-studio-editing-tables

22.2.3.8 Table Properties
.........................

To bring up Table Properties select the table and right-click to
activate the context menu. Select `Properties'.  The `Table Properties'
dockable window will be displayed.

FIGURE GOES HERE: Table Properties Menu Item

The following table properties can be set:

   * Auto Increment.

   * Average Row Length.

   * Character Set.

   * Collation.

   * Comment.

   * Data Directory.

   * Index Directory.

   * Maximum Rows.

   * Minimum Rows.

   * Name.

   * Row Format.

   * Schema.

   * Storage Engine.  Note that in MySQL 5.5 and higher, the default
     storage engine for new tables is `InnoDB'. See *Note
     innodb-default-se:: for more information about the choice of
     storage engine, and considerations if you convert existing tables
     to `InnoDB'.

The property `Schema' is read-only.

FIGURE GOES HERE: Table Properties


File: manual.info,  Node: connector-net-visual-studio-editing-views,  Next: connector-net-visual-studio-editing-stored-procedures-and-functions,  Prev: connector-net-visual-studio-editing-tables,  Up: connector-net-visual-studio

22.2.3.9 Editing Views
......................

To create a new view, right-click the Views node under the connection
node in Server Explorer. From the node's context menu, choose the
`Create View' command. This command opens the SQL Editor.

FIGURE GOES HERE: Editing View SQL

You can then enter the SQL for your view.

FIGURE GOES HERE: View SQL Added

To modify an existing view, double-click a node of the view to modify,
or right-click this node and choose the `Alter View' command from a
context menu. Either of the commands opens the SQL Editor.

All other view properties can be set in the Properties window.  These
properties are:

   * Catalog

   * Check Option

   * Definer

   * Definition

   * Definer

   * Is Updatable

   * Name

   * Schema

   * Security Type

Some of these properties can have arbitrary text values, others accept
values from a predefined set. In the latter case, set the desired value
with an embedded combobox.

The properties `Is Updatable' and `Schema' are readonly.

To save changes you have made, use either `Save' or `Save All' buttons
of the Visual Studio main toolbar, or press `Control+S'.

FIGURE GOES HERE: View SQL Saved


File: manual.info,  Node: connector-net-visual-studio-editing-stored-procedures-and-functions,  Next: connector-net-visual-studio-editing-triggers,  Prev: connector-net-visual-studio-editing-views,  Up: connector-net-visual-studio

22.2.3.10 Editing Stored Procedures and Functions
.................................................

To create a new stored procedure, right-click the `Stored Procedures'
node under the connection node in Server Explorer. From the node's
context menu, choose the `Create Routine' command. This command opens
the SQL Editor.

FIGURE GOES HERE: Edit Stored Procedure SQL

To create a new stored function, right-click the `Functions' node under
the connection node in Server Explorer. From the node's context menu,
choose the `Create Routine' command.

To modify an existing stored routine (procedure or function),
double-click the node of the routine to modify, or right-click this
node and choose the `Alter Routine' command from the context menu.
Either of the commands opens the SQL Editor.

To create or alter the routine definition using SQL Editor, type this
definition in the SQL Editor using standard SQL. All other routine
properties can be set in the Properties window. These properties are:

   * Body

   * Catalog

   * Comment

   * Creation Time

   * Data Access

   * Definer

   * Definition

   * External Name

   * External Language

   * Is Deterministic

   * Last Modified

   * Name

   * Parameter Style

   * Returns

   * Schema

   * Security Type

   * Specific Name

   * SQL Mode

   * SQL Path

   * Type

Some of these properties can have arbitrary text values, others accept
values from a predefined set. In the latter case, set the desired value
using the embedded combo box.

You can also set all the options directly in the SQL Editor, using the
standard *Note `CREATE PROCEDURE': create-procedure. or *Note `CREATE
FUNCTION': create-function. statement. However, it is recommended to
use the Properties window instead.

To save changes you have made, use either `Save' or `Save All' buttons
of the Visual Studio main toolbar, or press `Control+S'.

FIGURE GOES HERE: Stored Procedure SQL Saved

To observe the runtime behavior of a stored routine and debug any
problems, use the Stored Procedure Debugger (available in Connector/Net
6.6 and higher). See *Note connector-net-visual-studio-debugger:: for
details.


File: manual.info,  Node: connector-net-visual-studio-editing-triggers,  Next: connector-net-visual-studio-editing-user-defined-functions-udf,  Prev: connector-net-visual-studio-editing-stored-procedures-and-functions,  Up: connector-net-visual-studio

22.2.3.11 Editing Triggers
..........................

To create a new trigger, right-click the node of the table in which to
add the trigger. From the node's context menu, choose the `Create
Trigger' command. This command opens the SQL Editor.

To modify an existing trigger, double-click the node of the trigger to
modify, or right-click this node and choose the `Alter Trigger' command
from the context menu.  Either of the commands opens the SQL Editor.

To create or alter the trigger definition using SQL Editor, type the
trigger statement in the SQL Editor using standard SQL.

*Note*:

Enter only the trigger statement, that is, the part of the *Note
`CREATE TRIGGER': create-trigger. query that is placed after the `FOR
EACH ROW' clause.

All other trigger properties are set in the Properties window.  These
properties are:

   * Definer

   * Event Manipulation

   * Name

   * Timing

Some of these properties can have arbitrary text values, others accept
values from a predefined set. In the latter case, set the desired value
using the embedded combo box.

The properties `Event Table', `Schema', and `Server' in the Properties
window are read-only.

To save changes you have made, use either `Save' or `Save All' buttons
of the Visual Studio main toolbar, or press `Control+S'. Before changes
are saved, you will be asked to confirm the execution of the
corresponding SQL query in a confirmation dialog.

To observe the runtime behavior of a stored routine and debug any
problems, use the Stored Procedure Debugger (available in Connector/Net
6.6 and higher). See *Note connector-net-visual-studio-debugger:: for
details.


File: manual.info,  Node: connector-net-visual-studio-editing-user-defined-functions-udf,  Next: connector-net-visual-studio-debugger,  Prev: connector-net-visual-studio-editing-triggers,  Up: connector-net-visual-studio

22.2.3.12 Editing User Defined Functions (UDF)
..............................................

To create a new User Defined Function (UDF), right-click the `UDFs'
node under the connection node in Server Explorer. From the node's
context menu, choose the `Create UDF' command. This command opens the
UDF Editor.

To modify an existing UDF, double-click the node of the UDF to modify,
or right-click this node and choose the `Alter UDF' command from the
context menu. Either of these commands opens the UDF Editor.

The UDF editor enables you to set the following properties:

   * Name

   * So-name (DLL name)

   * Return type

   * Is Aggregate

There are text fields for both names, a combo box for the return type,
and a check box to indicate if the UDF is aggregate. All these options
are also accessible using the Properties window.

The property `Server' in the Properties window is read-only.

To save changes you have made, use either `Save' or `Save All' buttons
of the Visual Studio main toolbar, or press `Control+S'. Before changes
are saved, you will be asked to confirm the execution of the
corresponding SQL query in a confirmation dialog.

To observe the runtime behavior of a stored routine and debug any
problems, use the Stored Procedure Debugger (available in Connector/Net
6.6 and higher). See *Note connector-net-visual-studio-debugger:: for
details.


File: manual.info,  Node: connector-net-visual-studio-debugger,  Next: connector-net-visual-studio-cloning-database-objects,  Prev: connector-net-visual-studio-editing-user-defined-functions-udf,  Up: connector-net-visual-studio

22.2.3.13 Debugging Stored Procedures and Functions
...................................................

The stored procedure debugger, new in Connector/Net 6.6, provides
facilities for setting breakpoints, stepping into individual statements
(Step Into, Step Out, Step Over), evaluating and changing local
variable values, evaluating breakpoints, and other typical debugging
tasks.

* Installing the Debugger *

To enable the stored procedure debugger, install Connector/Net 6.6 or
higher and choose the `Complete' option.

* Privileges *

The debugger recreates at the start of each debug session a
`serversidedebugger' database in your server.  This database helps to
track the instrumented code and implement observability logic in the
debugged routine. Your current connection needs to have privileges to
create that database, and its associated stored routines, functions,
and tables.

The debugger makes changes behind the scenes to temporarily add
instrumentation code to the stored routines that you debug. You must
have the `ALTER ROUTINE' privilege for each stored procedure, function,
or trigger that you debug. (Including procedures and functions that are
called, and triggers that are fired, by a procedure that you are
debugging.)

* Starting the Debugger *

To start the debugger, follow these steps:

   * Choose a connection in the Visual Studio Server Explorer.

     FIGURE GOES HERE: Connection Dialog

   * Expand the `Stored Procedures' folder. Only stored procedures can
     be debugged directly. To debug a user-defined function, create a
     stored procedure that calls the function.

   * Click on a stored procedure node, then right-click and from the
     context menu choose `Debug Routine'.

     FIGURE GOES HERE: Choose a Stored Routine to Debug

At this point, Visual Studio switches to debug mode, opening the source
code of the routine being debugged in step mode, positioned on the
first statement.

If the initial routine you debug has one or more arguments, a popup
will show up with a grid (a row per each argument and three columns:
one for the argument, one for the argument value (this is editable) and
one for nullifying that argument value (a checkbox)). After setting up
all the argument values, you can press `OK' to start the debug session,
or `Cancel' to cancel the debug session.

FIGURE GOES HERE: Setting Arguments (1 of 2)

FIGURE GOES HERE: Setting Arguments (2 of 2)

* How the Debugger Works *

To have visibility into the internal workings of a stored routine, the
debugger prepares a special version of the procedure, function, or
trigger being debugged, instrumented with extra code to keep track of
the current line being stepped into and the values of all the local
variables. Any other stored procedures, functions, or triggers called
from the routine being debugged are instrumented the same way. The
debug versions of the routines are prepared for you automatically, and
when the debug session ends (by either pressing `F5' or `Shift+F5'),
the original versions of the routines are automatically restored.

A copy of the original version of each instrumented routine (the
version without instrumentation) is stored in the
`AppData\Roaming\MySqlDebuggerCache' folder for the current Windows
user (the path returned by calling
`System.Environment.GetFolderPath(Environment.SpecialFolder.ApplicationData)'
in .NET, plus appending `MySqlDebuggerCache'.  There is one file for
each instrumented routine, named `ROUTINE_NAME.mysql'.  For example, in
Windows 7, for a user named `fergs', the path is
`C:\Users\fergs\AppData\Roaming\MySqlDebuggerCache'.

Two threads are used, one for the debugger and one for the routine
being debugged. The threads run in strict alternation, switching
between the debugger and the routine as each statement is executed in
the stored routine.

* Basic Debugging Operations *

The debugger has the same look and feel as the standard Visual Studio
debuggers for C#, VB.NET or C++. In particular, the following are true:

*Locals and Watches*

   * To show the Locals tab, choose the menu item `Debug -> Windows ->
     Locals'.

     The `Locals' tab lists all the variables available in the current
     scope: variables defined with `DECLARE' at any point in the
     routine, argument parameters, and session variables that are
     referenced.

   * If the last step operation changes the value of a local, its value
     will be highlighted in red (until another statement is executed or
     stepped.

   * You can change the value of any local.

   * To show the `Watch' tab, choose the menu item `Debug -> Windows ->
     Watch'.

     To define a watch, type any valid MySQL expression, optionally
     including function calls. If the watch evaluation makes sense in
     the current context (current stack frame), it will show its value,
     otherwise it will show an error message in the same row the watch
     was defined.

   * When debugging a trigger, in addition to any locals declared or
     session variables referenced, the new and old object (when
     applicable) will be listed. For example in a trigger for `INSERT',
     for a table defined like:

          create table t1( id int, myname varchar( 50 ));

     the locals will list the extra variables `new.id' and `new.myname'.
     For an `UPDATE' trigger, you will also get the extra variables
     `old.id' and `old.myname'. These variables from the new and old
     objects can be manipulated the same way as any ordinary local
     variable.

     FIGURE GOES HERE: Debugging a Trigger

*Call Stack*

   * To show the `Call Stack' tab, choose the menu item `Debug ->
     Windows -> Call Stack'.

   * The stack trace (in the `Call Stack' tab) will list all the stack
     traces, one for each routine invocation. The one with a yellow
     mark is the current stepping point. Clicking in another will
     activate in the editor the tab for that routine source,
     highlighting in green the last statement stepped.

     FIGURE GOES HERE: Call Stack

*Stepping*

   * Stepping of a new routine starts in the first executable
     instruction (excluding declares, handlers, cursor declarations,
     and so on).

     FIGURE GOES HERE: Debug Stepping

     FIGURE GOES HERE: Function Stepping (1 of 2)

     FIGURE GOES HERE: Function Stepping (2 of 2)

   * To step into the code of a condition handler, the condition must
     be triggered in the rest of the MySQL routine.

   * The next statement to be executed is highlighted in yellow.

   * To continue stepping, you can choose between `Step Into' (by
     pressing `F11'), `Step Out' (by pressing `F10') or `Step Over' (by
     pressing `Shift+F11').

   * You can step out of any of functions, triggers or stored
     procedures. If you step from the main routine, it will run that
     routine to completion and finish the debug session.

   * You can step over stored procedure calls, stored functions, and
     triggers. (To step over a trigger, step over the statement that
     would cause the trigger to fire.)

   * When stepping into a single statement, the debugger will step into
     each individual function invoked by that statement and each
     trigger fired by that statement. The order in which they are
     debugged is the same order in which the MySQL server executes them.

   * You can step into triggers triggered from *Note `INSERT': insert,
     *Note `DELETE': delete, *Note `UPDATE': update, and *Note
     `REPLACE': replace. statements.

   * Also, the number of times you enter into a stored function or
     trigger depends on how many rows are evaluated by the function or
     affected by the trigger. For example, if you press `F11' (`Step
     Into') into an `UPDATE' statement that modifies three rows
     (calling a function for a column in the `SET' clause, thus
     invoking the function for each of the three rows), you will step
     into into that function three times in succession, once for each
     of the rows. You can accelerate this debug session by disabling
     any breakpoints defined in the given stored function and pressing
     `Shift+F11' to step out. In this example, the order in which the
     different instances of the stored function are debugged is
     server-specific: the same order used by the current MySQL server
     instance to evaluate the three function invocations.

*Breakpoints*

   * To show the `Breakpoints' tab, choose the menu item `Debug ->
     Windows -> Breakpoints'.

   * The `Breakpoints' tab will show all the breakpoints defined. From
     here, you can enable and disable breakpoints one by one or all at
     once (using the toolbar on top of the `Breakpoints' tab).

   * You can define new breakpoints only in the middle of a debug
     session. Click in the left gray border of any MySQL editor, or
     click anywhere in a MySQL editor and press `F9'. In the familiar
     Visual Studio way, you press `F9' once to create a breakpoint in
     that line, and press it again to remove that breakpoint.

   * Once a breakpoint is defined, it will appear enabled (as filled
     red circle left to the current row if that line is a valid
     statement to put a breakpoint) or disabled (as a non-filled red
     circle left to the current row if that row is not valid to put a
     breakpoint).

   * To define conditional breakpoints, after creating the breakpoint,
     right click in the red dot and choose `Condition...'. There you
     can put any valid MySQL expression and state if the condition is
     `Is True' or `Has changed'. The former will trigger the breakpoint
     every time the condition is true, the latter every time the
     condition value has changed.  (If you define a conditional
     breakpoint, it is not enough to step into the line with the
     breakpoint defined to trigger such a breakpoint.)

     FIGURE GOES HERE: Conditional Breakpoints

     FIGURE GOES HERE: Expressions and Breakpoints

   * To define pass count breakpoints, after creating the breakpoint,
     right click in the red dot and choose `Hit Count...'. In the popup
     dialog, define the specific condition to set. For example, `break
     when the hit count is equal to' and a value 3 will trigger the
     breakpoint the third time it is hit.

* Other Features *

   * To abort the debug session (and the execution of the current call
     stack of routines), press Shift+F5.

   * To run the routine to completion (or until next breakpoint hit),
     press F5.

   * For all functionality you can use (in addition to the shortcuts
     documented), see the options in the `Debug' menu of Visual Studio.

* Limitations *

   * Code being debugged must not use `get_lock' or `release_lock'
     MySQL functions, since they are used internally by the debugger
     infrastructure to synchronize the debugger and the debugged
     routine.

   * Code being debugged must avoid using any transaction code (`START
     TRANSACTION', `COMMIT', `ROLLBACK') due to the possibility of
     wiping out the contents of the debugger tables. (This limitation
     may be removed in the future).

   * You cannot debug the routines in the `serversidedebugger' database.

   * The MySQL server running the routine being debugged can be any
     version between 5.0 and 5.6, running on Windows, Linux, or any
     other supported platform.

   * We recommend always running debug sessions on test and development
     servers, rather than against a MySQL production server, because
     debugging can cause temporary performance issues or even
     deadlocks. The instrumented versions of the routines being
     debugged use locks, that the rest of the production code may not
     be aware of.

* Keyboard Shortcuts *

The following list summarizes the keyboard shortcuts for debugging:

   * `F9' Toggles breakpoints

   * `F11': Step into once

   * `F10': Step over once

   * `Shift+F11': Step out once

   * `F5': Run

   * `Shift+F5': Abort current debug session


File: manual.info,  Node: connector-net-visual-studio-cloning-database-objects,  Next: connector-net-visual-studio-dropping-database-objects,  Prev: connector-net-visual-studio-debugger,  Up: connector-net-visual-studio

22.2.3.14 Cloning Database Objects
..................................

Tables, views, stored procedures, and functions can be cloned using the
appropriate Clone command from the context menu: `Clone Table', `Clone
View', `Clone Routine'. The clone commands open the corresponding
editor for a new object: the `Table Editor' for cloning a table, and
the `SQL Editor' for cloning a view or a routine.

The editor is filled with values of the original object. You can modify
these values in the usual manner.

To save the cloned object, use either `Save' or `Save All' buttons of
the Visual Studio main toolbar, or press `Control+S'. Before changes are
saved, you will be asked to confirm the execution of the corresponding
SQL query in a confirmation dialog.


File: manual.info,  Node: connector-net-visual-studio-dropping-database-objects,  Next: connector-net-visual-studio-entity-framework,  Prev: connector-net-visual-studio-cloning-database-objects,  Up: connector-net-visual-studio

22.2.3.15 Dropping Database Objects
...................................

Tables, views, stored routines, triggers, and UDFs can be dropped with
the appropriate Drop command selected from its context menu: `Drop
Table', `Drop View', `Drop Routine', `Drop Trigger', `Drop UDF'.

You will be asked to confirm the execution of the corresponding drop
query in a confirmation dialog.

You can only drop a single object at a time.


File: manual.info,  Node: connector-net-visual-studio-entity-framework,  Next: connector-net-website-config,  Prev: connector-net-visual-studio-dropping-database-objects,  Up: connector-net-visual-studio

22.2.3.16 Using the ADO.NET Entity Framework
............................................

Connector/Net 6.0 introduced support for the ADO.NET Entity Framework.
ADO.NET Entity Framework was included with .NET Framework 3.5 Service
Pack 1, and Visual Studio 2008 Service Pack 1. ADO.NET Entity Framework
was released on 11th August 2008.

ADO.NET Entity Framework provides an Object Relational Mapping (ORM)
service, mapping the relational database schema to objects.  The
ADO.NET Entity Framework defines several layers, these can be
summarized as:

   * *Logical* - this layer defines the relational data and is defined
     by the Store Schema Definition Language (SSDL).

   * *Conceptual* - this layer defines the .NET classes and is defined
     by the Conceptual Schema Definition Language (CSDL)

   * *Mapping* - this layer defines the mapping from .NET classes to
     relational tables and associations, and is defined by Mapping
     Specification Language (MSL).

Connector/Net integrates with Visual Studio 2008 to provide a range of
helpful tools to assist the developer.

A full treatment of ADO.NET Entity Framework is beyond the scope of
this manual. If you are unfamiliar with ADO.NET, review the Microsoft
ADO.NET Entity Framework documentation
(http://msdn.microsoft.com/en-us/library/aa697427(VS.80).aspx).

Tutorials on getting started with ADO.NET Entity Framework are
available. See *Note
connector-net-tutorials-entity-framework-winform-data-source:: and
*Note
connector-net-tutorials-entity-framework-databinding-linq-entities::.


File: manual.info,  Node: connector-net-website-config,  Next: connector-net-sql-editor,  Prev: connector-net-visual-studio-entity-framework,  Up: connector-net-visual-studio

22.2.3.17 MySQL Website Configuration Tool
..........................................

MySQL Connector/Net 6.1 introduced the MySQL Website Configuration
Tool. This is a facility available in Visual Studio that enables you to
configure the Membership, Role, Session State and Profile Provider,
without editing configuration files. You set your configuration options
within the tool, and the tool modifies your `web.config' file
accordingly.

The MySQL Website Configuration Tool appears as a small icon on the
Solution Explorer toolbar in Visual Studio, as show by the following
screenshot:

FIGURE GOES HERE: MySQL Website Configuration Tool

Clicking the Website Configuration Tool icon launches the wizard and
displays the first screen:

FIGURE GOES HERE: MySQL Website Configuration Tool - Membership

This allows you to enable use of the MySQL Membership Provider.  Click
the check box to enable this. You can now enter the name of the
application that you are creating the configuration for. You can also
enter a description for the application.

You can then click the `Edit...' button to launch the Connection String
Editor:

FIGURE GOES HERE: MySQL Website Configuration Tool - Connection String
Editor

Note that if you have already defined a connection string for the
providers manually in `web.config', or previously using the tool, this
will be automatically loaded and displayed, and can then be modified in
this dialog.

You can also ensure that the necessary schemas are created
automatically for you by selecting the Autogenerate Schema check box.
These schemas are used to store membership information. The database
used to storage is the one specified in the connection string.

You can also ensure that exceptions generated by the application will
be written to the Windows event log by selecting the `Write exceptions
to event log' check box.

Clicking the `Advanced...' button launches a dialog that enables you to
set Membership Options. These options dictate such variables as
password length required when a user signs up, whether the password is
encrypted and whether the user can reset their password or not.

FIGURE GOES HERE: MySQL Website Configuration Tool - Advanced Options

Once information has been set up as required for configuration of the
Membership Provider, the `Next' button can be clicked to display the
Roles Provider screen:

FIGURE GOES HERE: MySQL Website Configuration Tool - Roles

Again the connection string can be edited, a description added and
Autogenerate Schema can be enabled before clicking `Next' to go to the
Profiles Provider screen:

FIGURE GOES HERE: MySQL Website Configuration Tool - Profiles

This screen display similar options to the previous screens.

Click `Next' to proceed to the Session State configuration page:

FIGURE GOES HERE: MySQL Website Configuration Tool - Session State

Once you have set up the Session State Provider as required, click
`Finish' to exit the wizard.

At this point, select the `Authentication Type' to `From Internet'.
Launch the ASP.NET Configuration Tool and select the Security tab.
Click the `Select authentication type' link and ensure that the `From
the internet' radio button is selected. You can now examine the
database you created to store membership information. All the necessary
tables will have been created for you:

FIGURE GOES HERE: MySQL Website Configuration Tool - Tables


File: manual.info,  Node: connector-net-sql-editor,  Next: connector-net-ddl-t4-ef,  Prev: connector-net-website-config,  Up: connector-net-visual-studio

22.2.3.18 MySQL SQL Editor
..........................

MySQL Connector/Net 6.3.2 introduced a new MySQL SQL Editor. The
easiest way to invoke the editor is by selecting the `New', `File' menu
item from the Visual Studio main menu. This displays the `New File'
dialog:

FIGURE GOES HERE: MySQL SQL Editor - New File

From the `New File' dialog, select the MySQL template, and then
double-click the `MySQL SQL Script' document, or click the `Open'
button.

The MySQL SQL Editor will be displayed. You can now enter SQL code as
required, or connect to a MySQL server. Click the `Connect to MySQL'
button in the MySQL SQL Editor toolbar. You can enter the connection
details into the `Connect to MySQL' dialog that is displayed.  You can
enter the server name, user ID, password and database to connect to, or
click the `Advanced' button to select other connection string options.
Click the `Connect' button to connect to the MySQL server. To execute
your SQL code against the server, click the `Run SQL' button on the
toolbar.

FIGURE GOES HERE: MySQL SQL Editor - Query

The results from any queries are displayed on the `Results' tab. Any
errors are displayed on the `Messages' tab.


File: manual.info,  Node: connector-net-ddl-t4-ef,  Prev: connector-net-sql-editor,  Up: connector-net-visual-studio

22.2.3.19 DDL T4 Template Macro
...............................

MySQL Connector/Net 6.3 introduced the ability to convert an Entity
Framework model to MySQL DDL code. Starting with a blank model, you can
develop an entity model in Visual Studio's designer. Once the model is
created, you can select the model's properties, and in the Database
Script Generation category of the model's properties, the property `DDL
Generation' can be found. Select the value `SSDLToMySQL.tt(VS)' from
the drop-down listbox.

FIGURE GOES HERE: DDL T4 Template Macro - Model Properties

Right-clicking the model design area displays a context-sensitive menu.
Selecting `Generate Database from Model' from the menu displays the
`Generate Database Wizard'. The wizard can then be used to generate
MySQL DDL code.

FIGURE GOES HERE: DDL T4 Template Macro - Generate Database Wizard


File: manual.info,  Node: connector-net-tutorials,  Next: connector-net-programming,  Prev: connector-net-visual-studio,  Up: connector-net

22.2.4 Connector/Net Tutorials
------------------------------

* Menu:

* connector-net-tutorials-intro::  Tutorial: An Introduction to Connector/Net Programming
* connector-net-tutorials-asp-roles::  Tutorial: MySQL Connector/Net ASP.NET Membership and Role Provider
* connector-net-tutorials-asp-provider-session-state::  Tutorial: MySQL Connector/Net ASP.NET Session State Provider
* connector-net-tutorials-asp-provider-profile::  Tutorial: MySQL Connector/Net ASP.NET Profile Provider
* connector-net-tutorials-entity-framework-winform-data-source::  Tutorial: Using an Entity Framework Entity as a Windows Forms Data Source
* connector-net-tutorials-entity-framework-databinding-linq-entities::  Tutorial: Databinding in ASP.NET Using LINQ on Entities
* connector-net-tutorials-ssl::  Tutorial: Using SSL with MySQL Connector/Net
* connector-net-tutorials-mysqlscript::  Tutorial: Using MySqlScript
* connector-net-tutorials-efmodel-ddl::  Tutorial: Generating MySQL DDL from an Entity Framework Model

The following tutorials illustrate how to develop MySQL programs using
technologies such as Visual Studio, C#, ASP.NET, and the .NET and Mono
frameworks. Work through the first tutorial to verify that you have the
right software components installed and configured, then choose other
tutorials to try depending on the features you intend to use in your
applications.


File: manual.info,  Node: connector-net-tutorials-intro,  Next: connector-net-tutorials-asp-roles,  Prev: connector-net-tutorials,  Up: connector-net-tutorials

22.2.4.1 Tutorial: An Introduction to Connector/Net Programming
...............................................................

* Menu:

* connector-net-tutorials-connection::  The MySqlConnection Object
* connector-net-tutorials-sql-command::  The MySqlCommand Object
* connector-net-tutorials-data-adapter::  Working with Decoupled Data
* connector-net-tutorials-parameters::  Working with Parameters
* connector-net-tutorials-stored-procedures::  Working with Stored Procedures

This section provides a gentle introduction to programming with
Connector/Net. The example code is written in C#, and is designed to
work on both Microsoft .NET Framework and Mono.

This tutorial is designed to get you up and running with Connector/Net
as quickly as possible, it does not go into detail on any particular
topic. However, the following sections of this manual describe each of
the topics introduced in this tutorial in more detail. In this tutorial
you are encouraged to type in and run the code, modifying it as
required for your setup.

This tutorial assumes you have MySQL and Connector/Net already
installed. It also assumes that you have installed the World example
database, which can be downloaded from the MySQL Documentation page
(http://dev.mysql.com/doc/index-other.html). You can also find details
on how to install the database on the same page.

*Note*:

Before compiling the example code, make sure that you have added
References to your project as required. The References required are
`System', `System.Data' and `MySql.Data'.


File: manual.info,  Node: connector-net-tutorials-connection,  Next: connector-net-tutorials-sql-command,  Prev: connector-net-tutorials-intro,  Up: connector-net-tutorials-intro

22.2.4.2 The MySqlConnection Object
...................................

For your Connector/Net application to connect to a MySQL database, it
must establish a connection by using a `MySqlConnection' object.

The `MySqlConnection' constructor takes a connection string as one of
its parameters. The connection string provides necessary information to
make the connection to the MySQL database. The connection string is
discussed more fully in *Note connector-net-programming-connecting::.
For a list of supported connection string options, see *Note
connector-net-connection-options::.

The following code shows how to create a connection object:

     using System;
     using System.Data;

     using MySql.Data;
     using MySql.Data.MySqlClient;

     public class Tutorial1
     {
         public static void Main()
         {
             string connStr = "server=localhost;user=root;database=world;port=3306;password=******;";
             MySqlConnection conn = new MySqlConnection(connStr);
             try
             {
                 Console.WriteLine("Connecting to MySQL...");
                 conn.Open();
                 // Perform database operations
             }
             catch (Exception ex)
             {
                 Console.WriteLine(ex.ToString());
             }
             conn.Close();
             Console.WriteLine("Done.");
         }
     }

When the `MySqlConnection' constructor is invoked, it returns a
connection object, which is used for subsequent database operations.
Open the connection before any other operations take place. Before the
application exits, close the connection to the database by calling
`Close' on the connection object.

Sometimes an attempt to perform an `Open' on a connection object can
fail, generating an exception that can be handled using standard
exception handling code.

In this section you have learned how to create a connection to a MySQL
database, and open and close the corresponding connection object.


File: manual.info,  Node: connector-net-tutorials-sql-command,  Next: connector-net-tutorials-data-adapter,  Prev: connector-net-tutorials-connection,  Up: connector-net-tutorials-intro

22.2.4.3 The MySqlCommand Object
................................

Once a connection has been established with the MySQL database, the
next step is do carry out the desired database operations.  This can be
achieved through the use of the `MySqlCommand' object.

You will see how to create a `MySqlCommand' object. Once it has been
created, there are three main methods of interest that you can call:

   * *ExecuteReader* - used to query the database. Results are usually
     returned in a `MySqlDataReader' object, created by `ExecuteReader'.

   * *ExecuteNonQuery* - used to insert and delete data.

   * *ExecuteScalar* - used to return a single value.

Once a `MySqlCommand' object has been created, you will call one of the
above methods on it to carry out a database operation, such as perform
a query. The results are usually returned into a `MySqlDataReader'
object, and then processed, for example the results might be displayed.
The following code demonstrates how this could be done.

     using System;
     using System.Data;

     using MySql.Data;
     using MySql.Data.MySqlClient;

     public class Tutorial2
     {
         public static void Main()
         {
             string connStr = "server=localhost;user=root;database=world;port=3306;password=******;";
             MySqlConnection conn = new MySqlConnection(connStr);
             try
             {
                 Console.WriteLine("Connecting to MySQL...");
                 conn.Open();

                 string sql = "SELECT Name, HeadOfState FROM Country WHERE Continent='Oceania'";
                 MySqlCommand cmd = new MySqlCommand(sql, conn);
                 MySqlDataReader rdr = cmd.ExecuteReader();

                 while (rdr.Read())
                 {
                     Console.WriteLine(rdr[0]+" -- "+rdr[1]);
                 }
                 rdr.Close();
             }
             catch (Exception ex)
             {
                 Console.WriteLine(ex.ToString());
             }

             conn.Close();
             Console.WriteLine("Done.");
         }
     }

When a connection has been created and opened, the code then creates a
`MySqlCommand' object. Note that the SQL query to be executed is passed
to the `MySqlCommand' constructor. The `ExecuteReader' method is then
used to generate a `MySqlReader' object. The `MySqlReader' object
contains the results generated by the SQL executed on the command
object. Once the results have been obtained in a `MySqlReader' object,
the results can be processed. In this case, the information is printed
out by a `while' loop.  Finally, the `MySqlReader' object is disposed of
by running its `Close' method on it.

In the next example, you will see how to use the `ExecuteNonQuery'
method.

The procedure for performing an `ExecuteNonQuery' method call is
simpler, as there is no need to create an object to store results. This
is because `ExecuteNonQuery' is only used for inserting, updating and
deleting data. The following example illustrates a simple update to the
`Country' table:

     using System;
     using System.Data;

     using MySql.Data;
     using MySql.Data.MySqlClient;

     public class Tutorial3
     {
         public static void Main()
         {
             string connStr = "server=localhost;user=root;database=world;port=3306;password=******;";
             MySqlConnection conn = new MySqlConnection(connStr);
             try
             {
                 Console.WriteLine("Connecting to MySQL...");
                 conn.Open();

                 string sql = "INSERT INTO Country (Name, HeadOfState, Continent) VALUES ('Disneyland','Mickey Mouse', 'North America')";
                 MySqlCommand cmd = new MySqlCommand(sql, conn);
                 cmd.ExecuteNonQuery();
             }
             catch (Exception ex)
             {
                 Console.WriteLine(ex.ToString());
             }

             conn.Close();
             Console.WriteLine("Done.");
         }
     }

The query is constructed, the command object created and the
`ExecuteNonQuery' method called on the command object. You can access
your MySQL database with the *Note `mysql': mysql. command interpreter
and verify that the update was carried out correctly.

Finally, you will see how the `ExecuteScalar' method can be used to
return a single value. Again, this is straightforward, as a
`MySqlDataReader' object is not required to store results, a simple
variable will do. The following code illustrates how to use
`ExecuteScalar':

     using System;
     using System.Data;

     using MySql.Data;
     using MySql.Data.MySqlClient;

     public class Tutorial4
     {
         public static void Main()
         {
             string connStr = "server=localhost;user=root;database=world;port=3306;password=******;";
             MySqlConnection conn = new MySqlConnection(connStr);
             try
             {
                 Console.WriteLine("Connecting to MySQL...");
                 conn.Open();

                 string sql = "SELECT COUNT(*) FROM Country";
                 MySqlCommand cmd = new MySqlCommand(sql, conn);
                 object result = cmd.ExecuteScalar();
                 if (result != null)
                 {
                     int r = Convert.ToInt32(result);
                     Console.WriteLine("Number of countries in the World database is: " + r);
                 }

             }
             catch (Exception ex)
             {
                 Console.WriteLine(ex.ToString());
             }

             conn.Close();
             Console.WriteLine("Done.");
         }
     }

This example uses a simple query to count the rows in the `Country'
table. The result is obtained by calling `ExecuteScalar' on the command
object.


File: manual.info,  Node: connector-net-tutorials-data-adapter,  Next: connector-net-tutorials-parameters,  Prev: connector-net-tutorials-sql-command,  Up: connector-net-tutorials-intro

22.2.4.4 Working with Decoupled Data
....................................

Previously, when using `MySqlDataReader', the connection to the
database was continually maintained, unless explicitly closed. It is
also possible to work in a manner where a connection is only
established when needed. For example, in this mode, a connection could
be established to read a chunk of data, the data could then be modified
by the application as required. A connection could then be
reestablished only if and when the application writes data back to the
database. This decouples the working data set from the database.

This decoupled mode of working with data is supported by Connector/Net.
There are several parts involved in allowing this method to work:

   * *Data Set* - The Data Set is the area in which data is loaded to
     read or modify it. A `DataSet' object is instantiated, which can
     store multiple tables of data.

   * *Data Adapter* - The Data Adapter is the interface between the
     Data Set and the database itself. The Data Adapter is responsible
     for efficiently managing connections to the database, opening and
     closing them as required. The Data Adapter is created by
     instantiating an object of the `MySqlDataAdapter' class. The
     `MySqlDataAdapter' object has two main methods: `Fill' which reads
     data into the Data Set, and `Update', which writes data from the
     Data Set to the database.

   * *Command Builder* - The Command Builder is a support object. The
     Command Builder works in conjunction with the Data Adapter. When a
     `MySqlDataAdapter' object is created, it is typically given an
     initial SELECT statement. From this *Note `SELECT': select.
     statement the Command Builder can work out the corresponding *Note
     `INSERT': insert, *Note `UPDATE': update. and *Note `DELETE':
     delete. statements that would be required to update the database.
     To create the Command Builder, an object of the class
     `MySqlCommandBuilder' is created.

Each of these classes will now be discussed in more detail.

*Instantiating a DataSet object*

A `DataSet' object can be created simply, as shown in the following
example code snippet:

     DataSet dsCountry;
     ...
     dsCountry = new DataSet();

Although this creates the `DataSet' object, it has not yet filled it
with data. For that, a Data Adapter is required.

*Instantiating a MySqlDataAdapter object*

The `MySqlDataAdapter' can be created as illustrated by the following
example:

     MySqlDataAdapter daCountry;
     ...
     string sql = "SELECT Code, Name, HeadOfState FROM Country WHERE Continent='North America'";
     daCountry = new MySqlDataAdapter (sql, conn);

Note, the `MySqlDataAdapter' is given the SQL specifying the data to
work with.

*Instantiating a MySqlCommandBuilder object*

Once the `MySqlDataAdapter' has been created, it is necessary to
generate the additional statements required for inserting, updating and
deleting data. There are several ways to do this, but in this tutorial
you will see how this can most easily be done with
`MySqlCommandBuilder'. The following code snippet illustrates how this
is done:

     MySqlCommandBuilder cb = new MySqlCommandBuilder(daCountry);

Note that the `MySqlDataAdapter' object is passed as a parameter to the
command builder.

*Filling the Data Set*

To do anything useful with the data from your database, you need to
load it into a Data Set. This is one of the jobs of the
`MySqlDataAdapter' object, and is carried out with its `Fill' method.
The following example code illustrates this:

     DataSet dsCountry;
     ...
     dsCountry = new DataSet();
     ...
     daCountry.Fill(dsCountry, "Country");

Note the `Fill' method is a `MySqlDataAdapter' method, the Data Adapter
knows how to establish a connection with the database and retrieve the
required data, and then populates the Data Set when the `Fill' method
is called. The second parameter `Country' is the table in the Data Set
to update.

*Updating the Data Set*

The data in the Data Set can now be manipulated by the application as
required. At some point, changes to data will need to be written back
to the database. This is achieved through a `MySqlDataAdapter' method,
the `Update' method.

     daCountry.Update(dsCountry, "Country");

Again, the Data Set and the table within the Data Set to update are
specified.

*Working Example*

The interactions between the `DataSet', `MySqlDataAdapter' and
`MySqlCommandBuilder' classes can be a little confusing, so their
operation can perhaps be best illustrated by working code.

In this example, data from the World database is read into a Data Grid
View control. Here, the data can be viewed and changed before clicking
an update button. The update button then activates code to write
changes back to the database. The code uses the principles explained
above. The application was built using the Microsoft Visual Studio to
place and create the user interface controls, but the main code that
uses the key classes described above is shown below, and is portable.

     using System;
     using System.Collections.Generic;
     using System.ComponentModel;
     using System.Data;
     using System.Drawing;
     using System.Linq;
     using System.Text;
     using System.Windows.Forms;

     using MySql.Data;
     using MySql.Data.MySqlClient;

     namespace WindowsFormsApplication5
     {
         public partial class Form1 : Form
         {
             MySqlDataAdapter daCountry;
             DataSet dsCountry;

             public Form1()
             {
                 InitializeComponent();
             }

             private void Form1_Load(object sender, EventArgs e)
             {

                 string connStr = "server=localhost;user=root;database=world;port=3306;password=******;";
                 MySqlConnection conn = new MySqlConnection(connStr);
                 try
                 {
                     label2.Text = "Connecting to MySQL...";

                     string sql = "SELECT Code, Name, HeadOfState FROM Country WHERE Continent='North America'";
                     daCountry = new MySqlDataAdapter (sql, conn);
                     MySqlCommandBuilder cb = new MySqlCommandBuilder(daCountry);

                     dsCountry = new DataSet();
                     daCountry.Fill(dsCountry, "Country");
                     dataGridView1.DataSource = dsCountry;
                     dataGridView1.DataMember = "Country";
                 }
                 catch (Exception ex)
                 {
                     label2.Text = ex.ToString();
                 }
             }

             private void button1_Click(object sender, EventArgs e)
             {
                 daCountry.Update(dsCountry, "Country");
                 label2.Text = "MySQL Database Updated!";
             }

         }
     }

The application running is shown below:

FIGURE GOES HERE: World Database Application


File: manual.info,  Node: connector-net-tutorials-parameters,  Next: connector-net-tutorials-stored-procedures,  Prev: connector-net-tutorials-data-adapter,  Up: connector-net-tutorials-intro

22.2.4.5 Working with Parameters
................................

This part of the tutorial shows you how to use parameters in your
Connector/Net application.

Although it is possible to build SQL query strings directly from user
input, this is not advisable as it does not prevent erroneous or
malicious information being entered. It is safer to use parameters as
they will be processed as field data only. For example, imagine the
following query was constructed from user input:

     string sql = "SELECT Name, HeadOfState FROM Country WHERE Continent = "+user_continent;

If the string `user_continent' came from a Text Box control, there
would potentially be no control over the string entered by the user.
The user could enter a string that generates a runtime error, or in the
worst case actually harms the system.  When using parameters it is not
possible to do this because a parameter is only ever treated as a field
parameter, rather than an arbitrary piece of SQL code.

The same query written user a parameter for user input would be:

     string sql = "SELECT Name, HeadOfState FROM Country WHERE Continent = @Continent";

Note that the parameter is preceded by an '@' symbol to indicate it is
to be treated as a parameter.

As well as marking the position of the parameter in the query string,
it is necessary to add a parameter to the Command object.  This is
illustrated by the following code snippet:

     cmd.Parameters.AddWithValue("@Continent", "North America");

In this example the string "North America" is supplied as the parameter
value statically, but in a more practical example it would come from a
user input control.

A further example illustrates the complete process:

     using System;
     using System.Data;

     using MySql.Data;
     using MySql.Data.MySqlClient;

     public class Tutorial5
     {
         public static void Main()
         {
             string connStr = "server=localhost;user=root;database=world;port=3306;password=******;";
             MySqlConnection conn = new MySqlConnection(connStr);
             try
             {
                 Console.WriteLine("Connecting to MySQL...");
                 conn.Open();

                 string sql = "SELECT Name, HeadOfState FROM Country WHERE Continent=@Continent";
                 MySqlCommand cmd = new MySqlCommand(sql, conn);

                 Console.WriteLine("Enter a continent e.g. 'North America', 'Europe': ");
                 string user_input = Console.ReadLine();

                 cmd.Parameters.AddWithValue("@Continent", user_input);

                 MySqlDataReader rdr = cmd.ExecuteReader();

                 while (rdr.Read())
                 {
                     Console.WriteLine(rdr["Name"]+" --- "+rdr["HeadOfState"]);
                 }
                 rdr.Close();
             }
             catch (Exception ex)
             {
                 Console.WriteLine(ex.ToString());
             }

             conn.Close();
             Console.WriteLine("Done.");
         }
     }

In this part of the tutorial you have see how to use parameters to make
your code more secure.


File: manual.info,  Node: connector-net-tutorials-stored-procedures,  Prev: connector-net-tutorials-parameters,  Up: connector-net-tutorials-intro

22.2.4.6 Working with Stored Procedures
.......................................

This section illustrates how to work with stored procedures.  Putting
database-intensive operations into stored procedures lets you define an
API for your database application. You can reuse this API across
multiple applications and multiple programming languages. This
technique avoids duplicating database code, saving time and effort when
you make updates due to schema changes, tune the performance of
queries, or add new database operations for logging, security, and so
on. Before working through this tutorial, familiarize yourself with the
*Note `CREATE PROCEDURE': create-procedure. and *Note `CREATE
FUNCTION': create-function. statements that create different kinds of
stored routines.

For the purposes of this tutorial, you will create a simple stored
procedure to see how it can be called from Connector/Net. In the MySQL
Client program, connect to the World database and enter the following
stored procedure:

     DELIMITER //
     CREATE PROCEDURE country_hos
     (IN con CHAR(20))
     BEGIN
       SELECT Name, HeadOfState FROM Country
       WHERE Continent = con;
     END //
     DELIMITER ;

Test that the stored procedure works as expected by typing the
following into the *Note `mysql': mysql. command interpreter:

     CALL country_hos('Europe');

Note that The stored routine takes a single parameter, which is the
continent to restrict your search to.

Having confirmed that the stored procedure is present and correct, you
can see how to access it from Connector/Net.

Calling a stored procedure from your Connector/Net application is
similar to techniques you have seen earlier in this tutorial. A
`MySqlCommand' object is created, but rather than taking an SQL query
as a parameter, it takes the name of the stored procedure to call. Set
the `MySqlCommand' object to the type of stored procedure, as shown by
the following code snippet:

     string rtn = "country_hos";
     MySqlCommand cmd = new MySqlCommand(rtn, conn);
     cmd.CommandType = CommandType.StoredProcedure;

In this case, the stored procedure requires you to pass a parameter.
This can be achieved using the techniques seen in the previous section
on parameters, *Note connector-net-tutorials-parameters::, as shown in
the following code snippet:

     cmd.Parameters.AddWithValue("@con", "Europe");

The value of the parameter `@con' could more realistically have come
from a user input control, but for simplicity it is set as a static
string in this example.

At this point, everything is set up and you can call the routine using
techniques also learned in earlier sections. In this case, the
`ExecuteReader' method of the `MySqlCommand' object is used.

Complete working code for the stored procedure example is shown below:

     using System;
     using System.Data;

     using MySql.Data;
     using MySql.Data.MySqlClient;

     public class Tutorial6
     {
         public static void Main()
         {
             string connStr = "server=localhost;user=root;database=world;port=3306;password=******;";
             MySqlConnection conn = new MySqlConnection(connStr);
             try
             {
                 Console.WriteLine("Connecting to MySQL...");
                 conn.Open();

                 string rtn = "country_hos";
                 MySqlCommand cmd = new MySqlCommand(rtn, conn);
                 cmd.CommandType = CommandType.StoredProcedure;

                 cmd.Parameters.AddWithValue("@con", "Europe");

                 MySqlDataReader rdr = cmd.ExecuteReader();
                 while (rdr.Read())
                 {
                     Console.WriteLine(rdr[0] + " --- " + rdr[1]);
                 }
                 rdr.Close();
             }
             catch (Exception ex)
             {
                 Console.WriteLine(ex.ToString());
             }

             conn.Close();
             Console.WriteLine("Done.");
         }
     }

In this section, you have seen how to call a stored procedure from
Connector/Net. For the moment, this concludes our introductory tutorial
on programming with Connector/Net.


File: manual.info,  Node: connector-net-tutorials-asp-roles,  Next: connector-net-tutorials-asp-provider-session-state,  Prev: connector-net-tutorials-intro,  Up: connector-net-tutorials

22.2.4.7 Tutorial: MySQL Connector/Net ASP.NET Membership and Role Provider
...........................................................................

Many web sites feature the facility for the user to create a user
account. They can then log into the web site and enjoy a personalized
experience. This requires that the developer creates database tables to
store user information, along with code to gather and process this
data. This represents a burden on the developer, and there is the
possibility for security issues to creep into the developed code.
However, ASP.NET 2.0 introduced the Membership system. This system is
designed around the concept of Membership, Profile and Role Providers,
which together provide all of the functionality to implement a user
system, that previously would have to have been created by the
developer from scratch.

Currently, MySQL Connector/Net provides Membership, Role, Profile and
Session State Providers.

This tutorial shows you how to set up your ASP.NET web application to
use the MySQL Connector/Net Membership and Role Providers. It assumes
that you have MySQL Server installed, along with MySQL Connector/Net
and Microsoft Visual Studio. This tutorial was tested with MySQL
Connector/Net 6.0.4 and Microsoft Visual Studio 2008 Professional
Edition. It is recommended you use 6.0.4 or above for this tutorial.

  1. Create a new database in the MySQL Server using the MySQL
     Command-Line Client program (`mysql'), or other suitable tool. It
     does not matter what name is used for the database, but record it.
     You specify it in the connection string constructed later in this
     tutorial. This database contains the tables, automatically created
     for you later, used to store data about users and roles.

  2. Create a new ASP.NET Web Site in Visual Studio. If you are not
     sure how to do this, refer to *Note
     connector-net-tutorials-entity-framework-databinding-linq-entities::,
     which demonstrates how to create a simple ASP.NET web site.

  3. Add References to `MySql.Data' and `MySql.Web' to the web site
     project.

  4. Locate the `machine.config' file on your system, which is the
     configuration file for the .NET Framework.

  5. Search the `machine.config' file to find the membership provider
     `MySQLMembershipProvider'.

  6. Add the attribute `autogenerateschema="true"'. The appropriate
     section should now resemble the following (note: for the sake of
     brevity some information has been excluded):

          <membership>
           <providers>
             <add name="AspNetSqlMembershipProvider"
               type="System.Web.Security.SqlMembershipProvider"
               ...
               connectionStringName="LocalSqlServer"
               ... />
             <add name="MySQLMembershipProvider"
               autogenerateschema="true"
               type="MySql.Web.Security.MySQLMembershipProvider, MySql.Web, Version=6.0.4.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d"
               connectionStringName="LocalMySqlServer"
               ... />
           </providers>
          </membership>

     Note that the name for the connection string to be used to connect
     to the server that contains the membership database is
     `LocalMySqlServer'.

     The `autogenerateschema="true"' attribute will cause MySQL
     Connector/Net to silently create, or upgrade, the schema on the
     database server, to contain the required tables for storing
     membership information.

  7. It is now necessary to create the connection string referenced in
     the previous step. Load the web site's `web.config' file into
     Visual Studio.

  8. Locate the section marked `<connectionStrings>'. Add the following
     connection string information:

          <connectionStrings>
            <remove name="LocalMySqlServer"/>
            <add name="LocalMySqlServer"
                 connectionString="Datasource=localhost;Database=users;uid=root;pwd=password;"
                 providerName="MySql.Data.MySqlClient"/>
          </connectionStrings>

     The database specified is the one created in the first step.  You
     could alternatively have used an existing database.

  9. At this point build the solution to ensure no errors are present.
     This can be done by selecting `Build', `Build Solution' from the
     main menu, or pressing `F6'.

 10. ASP.NET supports the concept of locally and remotely authenticated
     users. With local authentication the user is validated using their
     Windows credentials when they attempt to access the web site. This
     can be useful in an Intranet environment. With remote
     authentication, a user is prompted for their login details when
     accessing the web site, and these credentials are checked against
     the membership information stored in a database server such as
     MySQL Server. You will now see how to choose this form of
     authentication.

     Start the ASP.NET Web Site Administration Tool. This can be done
     quickly by clicking the small hammer/Earth icon in the Solution
     Explorer. You can also launch this tool by selecting `Website',
     `ASP.NET Configuration' from the main menu.

 11. In the ASP.NET Web Site Administration Tool click the `Security'
     tab.

 12. Now click the `User Authentication Type' link.

 13. Select the `From the internet' radio button. The web site will now
     need to provide a form to allow the user to enter their login
     details. These will be checked against membership information
     stored in the MySQL database.

     FIGURE GOES HERE: Authentication Type

 14. You now need to specify the Role and Membership Provider to be
     used. Click the `Provider' tab.

 15. Click the `Select a different provider for each feature
     (advanced)' link.

 16. Now select the `MySQLMembershipProvider' and the
     `MySQLRoleProvider' radio buttons.

     FIGURE GOES HERE: Select Membership and Role Provider

 17. In Visual Studio, rebuild the solution by selecting `Build',
     `Rebuild Solution' from the main menu.

 18. Check that the necessary schema has been created. This can be
     achieved using the *Note `mysql': mysql. command interpreter.

     FIGURE GOES HERE: Membership and Role Provider Tables

 19. Assuming all is present and correct, you can now create users and
     roles for your web application. The easiest way to do this is with
     the ASP.NET Web Site Administration Tool. However, many web
     applications contain their own modules for creating roles and
     users. For simplicity, the ASP.NET Web Site Administration Tool
     will be used in this tutorial.

 20. In the ASP.NET Web Site Administration Tool, click the `Security'
     tab. Now that both the Membership and Role Provider are enabled,
     you will see links for creating roles and users. Click the `Create
     or Manage Roles' link.

     FIGURE GOES HERE: Security Tab

 21. You can now enter the name of a new Role and click `Add Role' to
     create the new Role. Create new Roles as required.

 22. Click the `Back' button.

 23. Click the `Create User' link. You can now fill in information
     about the user to be created, and also allocate that user to one
     or more Roles.

     FIGURE GOES HERE: Create User

 24. Using the *Note `mysql': mysql. command interpreter, you can check
     that your database has been correctly populated with the
     Membership and Role data.

     FIGURE GOES HERE: Membership and Roles Table Contents

In this tutorial, you have seen how to set up the MySQL Connector/Net
Membership and Role Providers for use in your ASP.NET web application.


File: manual.info,  Node: connector-net-tutorials-asp-provider-session-state,  Next: connector-net-tutorials-asp-provider-profile,  Prev: connector-net-tutorials-asp-roles,  Up: connector-net-tutorials

22.2.4.8 Tutorial: MySQL Connector/Net ASP.NET Session State Provider
.....................................................................

MySQL Connector/Net from version 6.1 has included a MySQL Session State
Provider. This provider enables you to store session state in a MySQL
database. The following tutorial shows you how to prepare to use the
MySQL Session State Provider, and then store session data into the
MySQL database. This tutorial uses Microsoft Visual Studio 2008
Professional Edition, MySQL Connector/Net 6.1.1 and MySQL Server 5.1.
This tutorial also assumes you have created an empty database, for
example `test', where you will store session data. You could do this
using the *Note `mysql': mysql. command interpreter.

  1. In Visual Studio, create a new ASP.NET web site. If you are not
     sure how to do this, refer to the tutorial *Note
     connector-net-tutorials-entity-framework-databinding-linq-entities::,
     which demonstrates how to do this.

  2. Launch the MySQL MySQL Website Configuration tool. Due to a bug in
     6.1.1, this may not appear unless you are connected to a server in
     the Server Explorer. If you are unfamiliar with the MySQL Website
     Configuration tool, consider first working through the tutorial in
     *Note connector-net-website-config::.

  3. Navigate through the wizard to the Session State page. Make sure
     the check box `Use MySQL to manage my ASP.NET session data' is
     selected.

  4. On the same page, configure the connection string to the database
     that will contain your session data. If this database is empty,
     MySQL Connector/Net will create the schema required to store
     session data.

  5. Ensure that the check box `Autogenerate Schema' is selected so
     that MySQL Connector/Net will create the schema in your database
     to store the session data correctly.

  6. Enter the name of your application.

  7. Click `Finish'. The MySQL Website Configuration tool will now
     update your application's `web.config' file with information about
     the connection string and default providers to be used. In this
     case, we have selected the MySQL Session State Provider.

At this point, you are ready to use the MySQL database to store session
data. To test that the set up has worked, you can write a simple
program that uses session variables.

  1. Open `Default.aspx.cs'. In the `Page_Load' method, add the
     following code:

          Session["SessionVariable1"] = "Test string";

  2. Build your solution.

  3. Run the solution (without debugging). When the application runs,
     the provider will autogenerate tables required in the database you
     chose when setting up the application.

  4. Check that the schema was in fact created. Using the MySQL
     Command-Line Client use the target database and then type `SHOW
     TABLES;'. You will see that MySQL Connector/Net has created the
     required schema automatically, as we selected this to happen in
     the MySQL Website Configuration tool.

  5. Now view the contents of these tables by typing `SELECT * FROM
     my_aspnet_sessions;' in the *Note `mysql': mysql. command
     interpreter. This will display the session data our application
     used. Note that this is stored in binary format so some data may
     not display as expected.

At this point, you have installed the Session State Provider and
carried out a preliminary test of the installation. You will now work a
bit more with the Session State Provider.

In this part of the tutorial, you will set and retrieve a session
variable. You can work with your existing project.

  1. Select the `Default.aspx' and switch to Design View. Add a text
     box and three buttons. Change the text property for the buttons to
     `Store Session Variable', `Clear Textbox', and `Show Session
     Variable'. These will be `Button1', `Button2' and `Button3'
     respectively. Build your solution to ensure that no errors have
     been introduced.

  2. Still in the Design View, double-click `Button1'. Now to the
     `Button1_Click' event handler add code some the handler resembles
     the following:

          protected void Button1_Click(object sender, EventArgs e)
          {
              Session["SessionString"] = TextBox1.Text;
          }

     You have created a new Session variable accessed using the key
     `SessionString'. This will be set to the text that was entered
     into the text box when `Button1' is clicked.

  3. In Design View, double-click `Button2' to add its click event
     handler. This button needs to clear text from the text box. The
     code to do this is as follows:

          protected void Button2_Click(object sender, EventArgs e)
          {
              TextBox1.Text = "";
          }

     The code simply assigns an empty string to the `Text' property of
     the text box.

  4. In the Design View double-click `Button3' and modify the click
     handler as follows:

          protected void Button3_Click(object sender, EventArgs e)
          {
              TextBox1.Text = (String)Session["SessionString"];
          }

     This will retrieve the session string and display it in the text
     box.

  5. Now modify the `Page_Load' method as follows:

          protected void Page_Load(object sender, EventArgs e)
          {
              if (!IsPostBack)
              {
                 TextBox1.Text = "Enter some text";
              }
          }

     This ensures that when the page loads the text box `Text' property
     is reset.

  6. Ensure that the solution is saved and then rebuild the solution.

  7. Run the solution without debugging.

  8. The form will be displayed. Enter some text into the text box.
     Now click `Store Session Variable'. At this point you have stored
     the string in a session variable.

  9. Now click `Clear Text' to clear the text box.

 10. Now click `Show Session Variable' to retrieve and display the
     session variable.

 11. Refresh the page to destroy the form and display a new form.

 12. Click `Show Session Variable' the text box will display the stored
     session variable, demonstrating that the refreshing the page does
     not destroy the session variable.

This illustrates that the session state data is not destroyed when a
page is reloaded.


File: manual.info,  Node: connector-net-tutorials-asp-provider-profile,  Next: connector-net-tutorials-entity-framework-winform-data-source,  Prev: connector-net-tutorials-asp-provider-session-state,  Up: connector-net-tutorials

22.2.4.9 Tutorial: MySQL Connector/Net ASP.NET Profile Provider
...............................................................

This tutorial shows you how to use the MySQL Profile Provider to store
user profile information in a MySQL database. The tutorial uses MySQL
Connector/Net 6.1.1, MySQL Server 5.1 and Microsoft Visual Studio 2008
Professional Edition.

Many modern web sites allow the user to create a personal profile.
This requires a significant amount of code, but ASP.NET reduces this
considerable by including the functionality in its Profile classes. The
Profile Provider provides an abstraction between these classes and a
data source. The MySQL Profile Provider enables profile data to be
stored in a MySQL database. This enables the profile properties to be
written to a persistent store, and be retrieved when required. The
Profile Provider also enables profile data to be managed effectively,
for example it enables profiles that have not been accessed since a
specific date to be deleted.

The following steps show you how you can select the MySQL Profile
Provider.

  1. Create a new ASP.NET web project.

  2. Select the MySQL Website Configuration tool. Due to a bug in 6.1.1
     you may have to first connect to a server in Server Explorer
     before the tool's icon will display in the toolbar of the Solution
     Explorer.

  3. In the MySQL Website Configuration tool navigate through the tool
     to the Profiles page.

  4. Select the `Use MySQL to manage my profiles' check box.

  5. Select the `Autogenerate Schema' check box.

  6. Click the `Edit...' button and configure a connection string for
     the database that will be used to store user profile information.

  7. Navigate to the last page of the tool and click `Finish' to save
     your changes and exit the tool.

At this point you are now ready to start using the MySQL Profile
Provider. With the following steps you can carry out a preliminary test
of your installation.

  1. Open your `web.config' file.

  2. Add a simple profile such as the following:

          <system.web>
            <anonymousIdentification enabled="true"/>
            <profile defaultProvider="MySQLProfileProvider">
              ...
              <properties>
                <add name="Name" allowAnonymous="true"/>
                <add name="Age" allowAnonymous="true" type="System.UInt16"/>
                <group name="UI">
                  <add name="Color" allowAnonymous="true" defaultValue="Blue"/>
                  <add name="Style" allowAnonymous="true" defaultValue="Plain"/>
                </group>
              </properties>
            </profile>
            ...

     Note that `anonymousIdentification' has been set to true. This
     enables users who have not been authenticated to use profiles.
     They are identified by a GUID in a cookie rather than by user name.

Now that the simple profile has been defined in `web.config', the next
step is to write some code to test the profile.

  1. In Design View design a simple page with the following controls:

     FIGURE GOES HERE: Simple Profile Application

     These will allow the user to enter some profile information.  The
     user can also use the buttons to save their profile, clear the
     page, and restore their profile data.

  2. In the Code View add code as follows:

          ...
          protected void Page_Load(object sender, EventArgs e)
          {
              if (!IsPostBack)
              {
                  TextBox1.Text = Profile.Name;
                  TextBox2.Text = Profile.Age.ToString();
                  Label1.Text = Profile.UI.Color;
              }
          }

          // Store Profile
          protected void Button1_Click(object sender, EventArgs e)
          {
              Profile.Name = TextBox1.Text;
              Profile.Age = UInt16.Parse(TextBox2.Text);
          }

          // Clear Form
          protected void Button2_Click(object sender, EventArgs e)
          {
              TextBox1.Text = "";
              TextBox2.Text = "";
              Label1.Text = "";
          }

          // Retrieve Profile
          protected void Button3_Click(object sender, EventArgs e)
          {
              TextBox1.Text = Profile.Name;
              TextBox2.Text = Profile.Age.ToString();
              Label1.Text = Profile.UI.Color;
          }

          protected void DropDownList1_SelectedIndexChanged(object sender, EventArgs e)
          {
              Profile.UI.Color = DropDownList1.SelectedValue;
          }
          ...

  3. Save all files and build the solution to check that no errors have
     been introduced.

  4. Run the application.

  5. Enter your name, age and select a color from the listbox. Now
     store this information in your profile by clicking `Store
     Profile'. Note that if you do not select a color from the listbox
     your profile will use the default color `Blue' that was specified
     in the `web.config' file.

  6. Click `Clear Form' to clear text from the textboxes and the label
     that displays your chosen color.

  7. Now click `Retrieve Profile' to restore your profile data from the
     MySQL database.

  8. Now exit the browser to terminate the application.

  9. Run the application again. Note that when the page loads your
     profile information is restored from the MySQL database.

In this tutorial you have seen how to using the MySQL Profile Provider
with MySQL Connector/Net.


File: manual.info,  Node: connector-net-tutorials-entity-framework-winform-data-source,  Next: connector-net-tutorials-entity-framework-databinding-linq-entities,  Prev: connector-net-tutorials-asp-provider-profile,  Up: connector-net-tutorials

22.2.4.10 Tutorial: Using an Entity Framework Entity as a Windows Forms Data Source
...................................................................................

In this tutorial you will learn how to create a Windows Forms Data
Source from an Entity in an Entity Data Model. This tutorial assumes
that you have installed the World example database, which can be
downloaded from the MySQL Documentation page
(http://dev.mysql.com/doc/index-other.html). You can also find details
on how to install the database on the same page. It will also be
convenient for you to create a connection to the World database after
it is installed.  For instructions on how to do this see *Note
connector-net-visual-studio-making-a-connection::.

*Creating a new Windows Forms application*

The first step is to create a new Windows Forms application.

  1. In Visual Studio, select `File', `New', `Project' from the main
     menu.

  2. Choose the `Windows Forms Application' installed template. Click
     `OK'. The solution is created.

*Adding an Entity Data Model*

You will now add an Entity Data Model to your solution.

  1. In the Solution Explorer, right-click your application and select
     `Add', `New Item...'.  From `Visual Studio installed templates'
     select `ADO.NET Entity Data Model'. Click `Add'.

     FIGURE GOES HERE: Add Entity Data Model

  2. You will now see the Entity Data Model Wizard. You will use the
     wizard to generate the Entity Data Model from the world example
     database. Select the icon ` Generate from database'. Click `Next'.

     FIGURE GOES HERE: Entity Data Model Wizard Screen 1

  3. You can now select the connection you made earlier to the World
     database. If you have not already done so, you can create the new
     connection at this time by clicking `New Connection...'. For
     further instructions on creating a connection to a database see
     *Note connector-net-visual-studio-making-a-connection::.

     FIGURE GOES HERE: Entity Data Model Wizard Screen 2

  4. Make a note of the entity connection settings to be used in
     App.Config, as these will be used later to write the necessary
     control code.

  5. Click `Next'.

  6. The Entity Data Model Wizard connects to the database. You are
     then presented with a tree structure of the database. From this
     you can select the object you would like to include in your model.
     If you had created Views and Stored Routines these will be
     displayed along with any tables. In this example you just need to
     select the tables. Click `Finish' to create the model and exit the
     wizard.

     FIGURE GOES HERE: Entity Data Model Wizard Screen 3

  7. Visual Studio will generate the model and then display it.

     FIGURE GOES HERE: Entity Data Model Diagram

  8. From the Visual Studio main menu select `Build', `Build Solution',
     to ensure that everything compiles correctly so far.

*Adding a new Data Source*

You will now add a new Data Source to your project and see how it can
be used to read and write to the database.

  1. From the Visual Studio main menu select `Data', `Add New Data
     Source...'. You will be presented with the Data Source
     Configuration Wizard.

     FIGURE GOES HERE: Entity Data Source Configuration Wizard Screen 1

  2. Select the `Object' icon. Click `Next'.

  3. You will now select the Object to bind to. Expand the tree. In
     this tutorial, you will select the city table. Once the city table
     has been selected click `Next'.

     FIGURE GOES HERE: Entity Data Source Configuration Wizard Screen 2

  4. The wizard will confirm that the city object is to be added.
     Click `Finish'.

     FIGURE GOES HERE: Entity Data Source Configuration Wizard Screen 3

  5. The city object will be display in the Data Sources panel. If the
     Data Sources panel is not displayed, select `Data', `Show Data
     Sources' from the Visual Studio main menu. The docked panel will
     then be displayed.

     FIGURE GOES HERE: Data Sources

*Using the Data Source in a Windows Form*

You will now learn how to use the Data Source in a Windows Form.

  1. In the Data Sources panel select the Data Source you just created
     and drag and drop it onto the Form Designer. By default the Data
     Source object will be added as a Data Grid View control. Note that
     the Data Grid View control is bound to the `cityBindingSource' and
     the Navigator control is bound to `cityBindingNavigator'.

     FIGURE GOES HERE: Data Form Designer

  2. Save and rebuild the solution before continuing.

*Adding Code to Populate the Data Grid View*

You are now ready to add code to ensure that the Data Grid View control
will be populated with data from the City database table.

  1. Double-click the form to access its code.

  2. Add code to instantiate the Entity Data Model's EntityContainer
     object and retrieve data from the database to populate the control.

     FIGURE GOES HERE: Adding Code to the Form

  3. Save and rebuild the solution.

  4. Run the solution. Ensure the grid is populated and you can
     navigate the database.

     FIGURE GOES HERE: The Populated Grid Control

*Adding Code to Save Changes to the Database*

You will now add code to enable you to save changes to the database.

The Binding source component ensures that changes made in the Data Grid
View control are also made to the Entity classes bound to it.  However,
that data needs to be saved back from the entities to the database
itself. This can be achieved by the enabling of the Save button in the
Navigator control, and the addition of some code.

  1. In the Form Designer, click the Save icon in the Form toolbar and
     ensure that its Enabled property is set to True.

     FIGURE GOES HERE: Save Button Enabled

  2. Double-click the Save icon in the Form toolbar to display its code.

  3. You now need to add code to ensure that data is saved to the
     database when the save button is clicked in the application.

     FIGURE GOES HERE: Adding Save Code to the Form

  4. Once the code has been added, save the solution and rebuild it.
     Run the application and verify that changes made in the grid are
     saved.


File: manual.info,  Node: connector-net-tutorials-entity-framework-databinding-linq-entities,  Next: connector-net-tutorials-ssl,  Prev: connector-net-tutorials-entity-framework-winform-data-source,  Up: connector-net-tutorials

22.2.4.11 Tutorial: Databinding in ASP.NET Using LINQ on Entities
.................................................................

In this tutorial you create an ASP.NET web page that binds LINQ queries
to entities using the Entity Framework mapping.

If you have not already done so, install the World example database
prior to attempting this tutorial. See the tutorial *Note
connector-net-tutorials-entity-framework-winform-data-source:: for
instructions on downloading and installing this database.

*Creating an ASP.NET web site*

In this part of the tutorial, you create an ASP.NET web site. The web
site uses the World database. The main web page features a drop down
list from which you can select a country. Data about that country's
cities is then displayed in a grid view control.

  1. From the Visual Studio main menu select `File', `New', `Web
     Site...'.

  2. From the Visual Studio installed templates select `ASP.NET Web
     Site'. Click `OK'. You will be presented with the Source view of
     your web page by default.

  3. Click the Design view tab situated underneath the Source view
     panel.

     FIGURE GOES HERE: The Design Tab

  4. In the Design view panel, enter some text to decorate the blank
     web page.

  5. Click Toolbox. From the list of controls select `DropDownList'.
     Drag and drop the control to a location beneath the text on your
     web page.

     FIGURE GOES HERE: Drop Down List

  6. From the `DropDownList' control's context menu, ensure that the
     `Enable AutoPostBack' check box is enabled. This will ensure the
     control's event handler is called when an item is selected. The
     user's choice will in turn be used to populate the `GridView'
     control.

     FIGURE GOES HERE: Enable AutoPostBack

  7. From the Toolbox select the `GridView' control.

     FIGURE GOES HERE: Grid View Control

     Drag and drop the Grid Vew control to a location just below the
     Drop Down List you already placed.

     FIGURE GOES HERE: Placed Grid Vew Control

  8. At this point it is recommended that you save your solution, and
     build the solution to ensure that there are no errors.

  9. If you run the solution you will see that the text and drop down
     list are displayed, but the list is empty. Also, the grid view
     does not appear at all. Adding this functionality is described in
     the following sections.

At this stage you have a web site that will build, but further
functionality is required. The next step will be to use the Entity
Framework to create a mapping from the World database into entities
that you can control programmatically.

*Creating an ADO.NET Entity Data Model*

In this stage of the tutorial you will add an ADO.NET Entity Data Model
to your project, using the World database at the storage level. The
procedure for doing this is described in the tutorial *Note
connector-net-tutorials-entity-framework-winform-data-source::, and so
will not be repeated here.

*Populating a Drop Data List Box with using the results of a entity
LINQ query*

In this part of the tutorial you will write code to populate the
DropDownList control. When the web page loads the data to populate the
list will be achieved by using the results of a LINQ query on the model
created previously.

  1. In the Design view panel, double-click any blank area. This brings
     up the Page_Load method.

  2. Modify the relevant section of code according to the following
     listing:

          ...
          public partial class _Default : System.Web.UI.Page
          {
              worldModel.worldEntities we;

              protected void Page_Load(object sender, EventArgs e)
              {
                  we = new worldModel.worldEntities();

                  if (!IsPostBack)
                  {
                      var countryQuery = from c in we.country
                                         orderby c.Name
                                         select new { c.Code, c.Name };
                      DropDownList1.DataValueField = "Code";
                      DropDownList1.DataTextField = "Name";
                      DropDownList1.DataSource = countryQuery;
                      DataBind();
                  }
              }
          ...

     Note that the list control only needs to be populated when the
     page first loads. The conditional code ensures that if the page is
     subsequently reloaded, the list control is not repopulated, which
     would cause the user selection to be lost.

  3. Save the solution, build it and run it. You should see the list
     control has been populated. You can select an item, but as yet the
     grid view control does not appear.

At this point you have a working Drop Down List control, populated by a
LINQ query on your entity data model.

*Populating a Grid View control using an entity LINQ query*

In the last part of this tutorial you will populate the Grid View
Control using a LINQ query on your entity data model.

  1. In the Design view, double-click the `DropDownList' control. This
     causes its SelectedIndexChanged code to be displayed. This method
     is called when a user selects an item in the list control and thus
     fires an AutoPostBack event.

  2. Modify the relevant section of code accordingly to the following
     listing:

          ...
              protected void DropDownList1_SelectedIndexChanged(object sender, EventArgs e)
              {
                  var cityQuery = from c in we.city
                                  where c.CountryCode == DropDownList1.SelectedValue
                                  orderby c.Name
                                  select new { c.Name, c.Population, c.CountryCode };
                  GridView1.DataSource = cityQuery;
                  DataBind();
              }
          ...

     The grid view control is populated from the result of the LINQ
     query on the entity data model.

  3. As a check compare your code to that shown in the following
     screenshot:

     FIGURE GOES HERE: Source Code

  4. Save, build and run the solution. As you select a country you will
     see its cities are displayed in the grid view control.

     FIGURE GOES HERE: The Working Web Site

In this tutorial you have seen how to create an ASP.NET web site, you
have also seen how you can access a MySQL database using LINQ queries
on an entity data model.


File: manual.info,  Node: connector-net-tutorials-ssl,  Next: connector-net-tutorials-mysqlscript,  Prev: connector-net-tutorials-entity-framework-databinding-linq-entities,  Up: connector-net-tutorials

22.2.4.12 Tutorial: Using SSL with MySQL Connector/Net
......................................................

In this tutorial you will learn how you can use MySQL Connector/Net to
connect to a MySQL server configured to use SSL. Support for SSL client
certificates was added with MySQL Connector/Net 6.2.

MySQL Server uses the PEM format for certificates and private keys.
This tutorial will use the test certificates from the server test suite
by way of example. You can obtain the MySQL Server source code from
MySQL Downloads (http://dev.mysql.com/downloads/mysql/5.1.html#source).
The certificates can be found in the directory `./mysql-test/std_data'.

To carry out the steps in this tutorial, you must have Open SSL
installed. This can be downloaded for Microsoft Windows at no charge
from Shining Light Productions
(http://www.slproweb.com/products/Win32OpenSSL.html).

Further details on the connection string options used in this tutorial
can be found at *Note connector-net-connection-options::.

*Configuring the MySQL Server to use SSL*

  1. In the MySQL Server configuration file, set the SSL parameters as
     follows:

          ssl-ca=path/to/repo/mysql-test/std_data/cacert.pem
          ssl-cert=path/to/repo/mysql-test/std_data/server-cert.pem
          ssl-key=path/to/repo/mysql-test/std_data/server-key.pem

     Adjust the directories according to the location in which you
     installed the MySQL source code.

  2. In this step you create a test user and set the user to require
     SSL.

     Using the MySQL Command-Line Client, connect as `root' and create
     the user `sslclient'.

  3. To set privileges and requirements, issue the following command:

          GRANT ALL PRIVILEGES ON *.* TO sslclient@'%' REQUIRE SSL;

* Creating a certificate file to use with the .NET client*

  1. The .NET client does not use the PEM file format, as .NET does not
     support this format natively. You will be using test client
     certificates from the same server repository, for the purposes of
     this example. Convert these to PFX format first. This format is
     also known as PKCS#12. An article describing this procedure can be
     found at the Citrix website
     (http://support.citrix.com/article/CTX106630). From the directory
     `SERVER-REPOSITORY-ROOT/mysql-test/std_data', issue the following
     command:

          openssl pkcs12 -export -in client-cert.pem -inkey client-key.pem -certfile cacert.pem -out client.pfx

  2. When asked for an export password, enter the password `pass'. The
     file `client.pfx' will be generated. This file is used in the
     remainder of the tutorial.

*Connecting to the server using a file-based certificate*

  1. You will use PFX file, `client.pfx' you created in the previous
     step to authenticate the client. The following example
     demonstrates how to connect using the `SSL Mode', `CertificateFile'
     and `CertificatePassword' connection string options:

          using (MySqlConnection connection = new MySqlConnection(
            "database=test;user=sslclient;" +
            "CertificateFile=H:\\bzr\\mysql-trunk\\mysql-test\\std_data\\client.pfx" +
            "CertificatePassword=pass;" +
            "SSL Mode=Required "))
          {
              connection.Open();
          }

     The path to the certificate file will need to be changed to
     reflect your individual installation.

*Connecting to the server using a store-based certificate*

  1. The first step is to import the PFX file, `client.pfx', into the
     Personal Store.  Double-click the file in Windows explorer. This
     launches the Certificate Import Wizard.

  2. Follow the steps dictated by the wizard, and when prompted for the
     password for the PFX file, enter `pass'.

  3. Click `Finish' to close the wizard and import the certificate into
     the personal store.

*Examine certificates in the Personal Store*

  1. Start the Microsoft Management Console by entering `mmc.exe' at a
     command prompt.

  2. Select `File', `Add/Remove snap-in'. Click `Add'. Select
     `Certificates' from the list of available snap-ins in the dialog.

  3. Click `Add' button in the dialog, and select the `My user account'
     radio button.  This is used for personal certificates.

  4. Click the `Finish' button.

  5. Click `OK' to close the Add/Remove Snap-in dialog.

  6. You will now have `Certificates - Current User' displayed in the
     left panel of the Microsoft Management Console. Expand the
     Certificates - Current User tree item and select `Personal',
     `Certificates'. The right-hand panel will display a certificate
     issued to MySQL. This is the certificate that was previously
     imported. Double-click the certificate to display its details.

  7. After you have imported the certificate to the Personal Store, you
     can use a more succint connection string to connect to the
     database, as illustrated by the following code:

          using (MySqlConnection connection = new MySqlConnection(
             "database=test;user=sslclient;" +
             "Certificate Store Location=CurrentUser;" +
             "SSL Mode=Required"))
          {
             connection.Open();
          }

*Certificate Thumbprint Parameter*

If you have a large number of certificates in your store, and many have
the same Issuer, this can be a source of confusion and result in the
wrong certificate being used. To alleviate this situation, there is an
optional Certificate Thumbprint parameter that can additionally be
specified as part of the connection string. As mentioned before, you
can double-click a certificate in the Microsoft Management Console to
display the certificate's details.  When the Certificate dialog is
displayed click the `Details' tab and scroll down to see the
thumbprint. The thumbprint will typically be a number such as `‎47 94
36 00 9a 40 f3 01 7a 14 5c f8 47 9e 76 94 d7 aa de f0'. This thumbprint
can be used in the connection string, as the following code illustrates:

     using (MySqlConnection connection = new MySqlConnection(
           "database=test;user=sslclient;" +
           "Certificate Store Location=CurrentUser;" +
           "Certificate Thumbprint=479436009a40f3017a145cf8479e7694d7aadef0;"+
           "SSL Mode=Required"))
     {
         connection.Open();
     }

Spaces in the thumbprint parameter are optional and the value is
case-insensitive.


File: manual.info,  Node: connector-net-tutorials-mysqlscript,  Next: connector-net-tutorials-efmodel-ddl,  Prev: connector-net-tutorials-ssl,  Up: connector-net-tutorials

22.2.4.13 Tutorial: Using MySqlScript
.....................................

* Menu:

* connector-net-tutorials-mysqlscript-delimiter::  Using Delimiters with MySqlScript

This tutorial teaches you how to use the MySqlScript class. This class
enables you to execute a series of statements. Depending on the
circumstances, this can be more convenient than using the MySqlCommand
approach.

Further details of the MySqlScript class can be found in the reference
documentation supplied with MySQL Connector/Net.

To run the example programs in this tutorial, set up a simple test
database and table using the *Note `mysql': mysql. Command-Line Client
or MySQL Workbench. Commands for the *Note `mysql': mysql.
Command-Line Client are given here:

     CREATE DATABASE TestDB;
     USE TestDB;
     CREATE TABLE TestTable (id INT NOT NULL PRIMARY KEY
       AUTO_INCREMENT, name VARCHAR(100));

The main method of the MySqlScript class is the Execute method. This
method causes the script (sequence of statements) assigned to the Query
property of the MySqlScript object to be executed. Note the Query
property can be set through the MySqlScript constructor or using the
Query property.  Execute returns the number of statements executed.

The MySqlScript object will execute the specified script on the
connection set using the Connection property. Again, this property can
be set directly or through the MySqlScript constructor. The following
code snippets illustrate this:

     string sql = "SELECT * FROM TestTable";
     ...
     MySqlScript script = new MySqlScript(conn, sql);
     ...
     MySqlScript script = new MySqlScript();
     script.Query = sql;
     script.Connection = conn;
     ...
     script.Execute();

The MySqlScript class has several events associated with it. There are:

  1. Error - generated if an error occurs.

  2. ScriptCompleted - generated when the script successfully completes
     execution.

  3. StatementExecuted - generated after each statement is executed.

It is possible to assign event handlers to each of these events.  These
user-provided routines are called back when the connected event occurs.
The following code shows how the event handlers are set up.

     script.Error += new MySqlScriptErrorEventHandler(script_Error);
     script.ScriptCompleted += new EventHandler(script_ScriptCompleted);
     script.StatementExecuted += new MySqlStatementExecutedEventHandler(script_StatementExecuted);

In VisualStudio, you can save typing by using tab completion to fill
out stub routines. Start by typing, for example, `script.Error +='.
Then press `TAB', and then press `TAB' again. The assignment is
completed, and a stub event handler created. A complete working example
is shown below:

     using System;
     using System.Collections.Generic;
     using System.Linq;
     using System.Text;

     using System.Data;
     using MySql.Data;
     using MySql.Data.MySqlClient;

     namespace MySqlScriptTest
     {
         class Program
         {
             static void Main(string[] args)
             {
                 string connStr = "server=localhost;user=root;database=TestDB;port=3306;password=******;";
                 MySqlConnection conn = new MySqlConnection(connStr);

                 try
                 {
                     Console.WriteLine("Connecting to MySQL...");
                     conn.Open();

                     string sql = "INSERT INTO TestTable(name) VALUES ('Superman');" +
                                  "INSERT INTO TestTable(name) VALUES ('Batman');" +
                                  "INSERT INTO TestTable(name) VALUES ('Wolverine');" +
                                  "INSERT INTO TestTable(name) VALUES ('Storm');";

                     MySqlScript script = new MySqlScript(conn, sql);

                     script.Error += new MySqlScriptErrorEventHandler(script_Error);
                     script.ScriptCompleted += new EventHandler(script_ScriptCompleted);
                     script.StatementExecuted += new MySqlStatementExecutedEventHandler(script_StatementExecuted);

                     int count = script.Execute();

                     Console.WriteLine("Executed " + count + " statement(s).");
                     Console.WriteLine("Delimiter: " + script.Delimiter);
                 }
                 catch (Exception ex)
                 {
                     Console.WriteLine(ex.ToString());
                 }

                 conn.Close();
                 Console.WriteLine("Done.");
             }

             static void script_StatementExecuted(object sender, MySqlScriptEventArgs args)
             {
                 Console.WriteLine("script_StatementExecuted");
             }

             static void script_ScriptCompleted(object sender, EventArgs e)
             {
                 /// EventArgs e will be EventArgs.Empty for this method
                 Console.WriteLine("script_ScriptCompleted!");
             }

             static void script_Error(Object sender, MySqlScriptErrorEventArgs args)
             {
                 Console.WriteLine("script_Error: " + args.Exception.ToString());
             }
         }
     }

Note that in the script_ScriptCompleted event handler, the EventArgs
parameter `e' will be `EventArgs.Empty'. In the case of the
`ScriptCompleted' event there is no additional data to be obtained,
which is why the event object is `EventArgs.Empty'.


File: manual.info,  Node: connector-net-tutorials-mysqlscript-delimiter,  Prev: connector-net-tutorials-mysqlscript,  Up: connector-net-tutorials-mysqlscript

22.2.4.14 Using Delimiters with MySqlScript
...........................................

Depending on the nature of the script, you may need control of the
delimiter used to separate the statements that will make up a script.
The most common example of this is where you have a multi-statement
stored routine as part of your script. In this case if the default
delimiter of `;' is used you will get an error when you attempt to
execute the script. For example, consider the following stored routine:

     CREATE PROCEDURE test_routine()
     BEGIN
         SELECT name FROM TestTable ORDER BY name;
         SELECT COUNT(name) FROM TestTable;
     END

This routine actually needs to be executed on the MySQL Server as a
single statement. However, with the default delimiter of `;', the
MySqlScript class would interpret the above as two statements, the
first being:

     CREATE PROCEDURE test_routine()
     BEGIN
         SELECT name FROM TestTable ORDER BY name;

Executing this as a statement would generate an error. To solve this
problem MySqlScript supports the ability to set a different delimiter.
This is achieved through the Delimiter property. For example, you could
set the delimiter to `??', in which case the above stored routine would
no longer generate an error when executed.  Multiple statements can be
delimited in the script, so for example, you could have a three
statement script such as:

     string sql = "DROP PROCEDURE IF EXISTS test_routine??" +
                  "CREATE PROCEDURE test_routine() " +
                  "BEGIN " +
                  "SELECT name FROM TestTable ORDER BY name;" +
                  "SELECT COUNT(name) FROM TestTable;" +
                  "END??" +
                  "CALL test_routine()";

You can change the delimiter back at any point by setting the Delimiter
property. The following code shows a complete working example:

     using System;
     using System.Collections.Generic;
     using System.Linq;
     using System.Text;

     using MySql.Data;
     using MySql.Data.MySqlClient;

     namespace ConsoleApplication8
     {
         class Program
         {
             static void Main(string[] args)
             {
                 string connStr = "server=localhost;user=root;database=TestDB;port=3306;password=******;";
                 MySqlConnection conn = new MySqlConnection(connStr);

                 try
                 {
                     Console.WriteLine("Connecting to MySQL...");
                     conn.Open();

                     string sql =    "DROP PROCEDURE IF EXISTS test_routine??" +
                                     "CREATE PROCEDURE test_routine() " +
                                     "BEGIN " +
                                     "SELECT name FROM TestTable ORDER BY name;" +
                                     "SELECT COUNT(name) FROM TestTable;" +
                                     "END??" +
                                     "CALL test_routine()";

                     MySqlScript script = new MySqlScript(conn);

                     script.Query = sql;
                     script.Delimiter = "??";
                     int count = script.Execute();
                     Console.WriteLine("Executed " + count + " statement(s)");
                     script.Delimiter = ";";
                     Console.WriteLine("Delimiter: " + script.Delimiter);
                     Console.WriteLine("Query: " + script.Query);
                 }
                 catch (Exception ex)
                 {
                     Console.WriteLine(ex.ToString());
                 }

                 conn.Close();
                 Console.WriteLine("Done.");
             }
         }
     }


File: manual.info,  Node: connector-net-tutorials-efmodel-ddl,  Prev: connector-net-tutorials-mysqlscript,  Up: connector-net-tutorials

22.2.4.15 Tutorial: Generating MySQL DDL from an Entity Framework Model
.......................................................................

In this tutorial, you will learn how to create MySQL DDL from an Entity
Framework model.  Use Visual Studio 2010 and MySQL Connector/Net 6.3 to
carry out this tutorial.

  1. Create a new console application in Visual Studio 2010.

  2. Using the `Solution Explorer', add a reference to
     `MySql.Data.Entity'.

  3. From the `Solution Explorer' select `Add', `New Item'. In the `Add
     New Item' dialog select `Online Templates'. Select `ADO.NET Entity
     Data Model' and click `Add'. The `Entity Data Model' dialog will
     be displayed.

  4. In the `Entity Data Model' dialog select `Empty Model'. Click
     `Finish'. A blank model will be created.

  5. Create a simple model. A single Entity will do for the purposes of
     this tutorial.

  6. In the `Properties' panel select `ConceptualEntityModel' from the
     drop-down listbox.

  7. In the `Properties' panel, locate the `DDL Generation Template' in
     the category `Database Script Generation'.

  8. For the `DDL Generation' property select `SSDLToMySQL.tt(VS)' from
     the drop-down listbox.

  9. Save the solution.

 10. Right-click an empty space in the model design area. The
     context-sensitive menu will be displayed.

 11. From the context-sensitive menu select `Generate Database from
     Model'. The `Generate Database Wizard' dialog will be displayed.

 12. In the `Generate Database Wizard' dialog select an existing
     connection, or create a new connection to a server. Select an
     appropriate radio button to show or hide sensitive data. For the
     purposes of this tutorial you can select `Yes' (although you might
     skip this for commercial applications).

 13. Click `Next'. MySQL compatible DDL code will be generated. Click
     `Finish' to exit the wizard.

You have seen how to create MySQL DDL code from an Entity Framework
model.


File: manual.info,  Node: connector-net-programming,  Next: connector-net-connection-options,  Prev: connector-net-tutorials,  Up: connector-net

22.2.5 Connector/Net Programming
--------------------------------

* Menu:

* connector-net-programming-connecting::  Connecting to MySQL Using Connector/Net
* connector-net-programming-connecting-connection-string::  Creating a Connector/Net Connection String
* connector-net-programming-mysqlcommand::  Using MySqlCommand
* connector-net-programming-connection-pooling::  Using Connector/Net with Connection Pooling
* connector-net-programming-authentication-windows-native::  Using the Windows Native Authentication Plugin
* connector-net-programming-authentication-user-plugin::  Writing a Custom Authentication Plugin
* connector-net-programming-tablecaching::  Using Connector/Net with Table Caching
* connector-net-programming-prepared::  Using the Connector/Net with Prepared Statements
* connector-net-programming-stored::  Accessing Stored Procedures with Connector/Net
* connector-net-programming-blob::  Handling BLOB Data With Connector/Net
* connector-net-interceptors::   Using the Connector/Net Interceptor Classes
* connector-net-programming-datetime::  Handling Date and Time Information in Connector/Net
* connector-net-programming-bulk-loader::  Using the `MySqlBulkLoader' Class
* connector-net-programming-tracing::  Using the MySQL Connector/Net Trace Source Object
* connector-net-programming-binary-issues::  Binary/Nonbinary Issues
* connector-net-using-character-sets::  Character Set Considerations for Connector/Net
* connector-net-programming-crystal::  Using Connector/Net with Crystal Reports
* connector-net-programming-asp-provider::  ASP.NET Provider Model
* connector-net-medium-trust::   Working with Partial Trust / Medium Trust

Connector/Net comprises several classes that are used to connect to the
database, execute queries and statements, and manage query results.

The following are the major classes of Connector/Net:

   * `MySqlCommand': Represents an SQL statement to execute against a
     MySQL database.

   * `MySqlCommandBuilder': Automatically generates single-table
     commands used to reconcile changes made to a DataSet with the
     associated MySQL database.

   * `MySqlConnection': Represents an open connection to a MySQL Server
     database.

   * `MySqlDataAdapter': Represents a set of data commands and a
     database connection that are used to fill a data set and update a
     MySQL database.

   * `MySqlDataReader': Provides a means of reading a forward-only
     stream of rows from a MySQL database.

   * `MySqlException': The exception that is thrown when MySQL returns
     an error.

   * `MySqlHelper': Helper class that makes it easier to work with the
     provider.

   * `MySqlTransaction': Represents an SQL transaction to be made in a
     MySQL database.

In the following sections, you will learn about some common use cases
for Connector/Net, including BLOB handling, date handling, and using
Connector/Net with common tools such as Crystal Reports.


File: manual.info,  Node: connector-net-programming-connecting,  Next: connector-net-programming-connecting-connection-string,  Prev: connector-net-programming,  Up: connector-net-programming

22.2.5.1 Connecting to MySQL Using Connector/Net
................................................

All interaction between a .NET application and the MySQL server is
routed through a `MySqlConnection' object. Before your application can
interact with the server, it must instantiate, configure, and open a
`MySqlConnection' object.

Even when using the `MySqlHelper' class, a `MySqlConnection' object is
created by the helper class.

This section describes how to connect to MySQL using the
`MySqlConnection' object.


File: manual.info,  Node: connector-net-programming-connecting-connection-string,  Next: connector-net-programming-mysqlcommand,  Prev: connector-net-programming-connecting,  Up: connector-net-programming

22.2.5.2 Creating a Connector/Net Connection String
...................................................

* Menu:

* connector-net-programming-connecting-open::  Opening a Connection
* connector-net-programming-connecting-errors::  Handling Connection Errors
* connector-net-programming-getschema::  Using GetSchema on a Connection

The `MySqlConnection' object is configured using a connection string. A
connection string contains several key/value pairs, separated by
semicolons. In each key/value pair, the option name and its
corresponding value are joined by an equal sign. For the list of option
names to use in the connection string, see *Note
connector-net-connection-options::.

The following is a sample connection string:

     Server=127.0.0.1;Uid=root;Pwd=12345;Database=test;

In this example, the `MySqlConnection' object is configured to connect
to a MySQL server at `127.0.0.1', with a user name of `root' and a
password of `12345'. The default database for all statements will be
the `test' database.

*Note*:

Using the '@' symbol for parameters is now the preferred approach,
although the old pattern of using '?' is still supported. To avoid
conflicts when using the '@' symbol in combination with user variables,
see the `Allow User Variables' connection string option in *Note
connector-net-connection-options::. The `Old Syntax' connection string
option has now been deprecated.


File: manual.info,  Node: connector-net-programming-connecting-open,  Next: connector-net-programming-connecting-errors,  Prev: connector-net-programming-connecting-connection-string,  Up: connector-net-programming-connecting-connection-string

22.2.5.3 Opening a Connection
.............................

Once you have created a connection string it can be used to open a
connection to the MySQL server.

The following code is used to create a `MySqlConnection' object, assign
the connection string, and open the connection.

Connector/Net can also connect using the native Windows authentication
plugin. See *Note
connector-net-programming-authentication-windows-native:: for details.

You can further extend the authentication mechanism by writing your own
authentication plugin. See *Note
connector-net-programming-authentication-user-plugin:: for details.

* Visual Basic Example *

     Dim conn As New MySql.Data.MySqlClient.MySqlConnection
     Dim myConnectionString as String

     myConnectionString = "server=127.0.0.1;" _
                 & "uid=root;" _
                 & "pwd=12345;" _
                 & "database=test;"

     Try
       conn.ConnectionString = myConnectionString
       conn.Open()

     Catch ex As MySql.Data.MySqlClient.MySqlException
       MessageBox.Show(ex.Message)
     End Try

* C# Example *

     MySql.Data.MySqlClient.MySqlConnection conn;
     string myConnectionString;

     myConnectionString = "server=127.0.0.1;uid=root;" +
         "pwd=12345;database=test;";

     try
     {
         conn = new MySql.Data.MySqlClient.MySqlConnection();
         conn.ConnectionString = myConnectionString;
         conn.Open();
     }
     catch (MySql.Data.MySqlClient.MySqlException ex)
     {
         MessageBox.Show(ex.Message);
     }

You can also pass the connection string to the constructor of the
`MySqlConnection' class:

* Visual Basic Example *

     Dim myConnectionString as String

     myConnectionString = "server=127.0.0.1;" _
                   & "uid=root;" _
                   & "pwd=12345;" _
                   & "database=test;"

     Try
         Dim conn As New MySql.Data.MySqlClient.MySqlConnection(myConnectionString)
         conn.Open()
     Catch ex As MySql.Data.MySqlClient.MySqlException
        MessageBox.Show(ex.Message)
     End Try

* C# Example *

     MySql.Data.MySqlClient.MySqlConnection conn;
     string myConnectionString;

     myConnectionString = "server=127.0.0.1;uid=root;" +
         "pwd=12345;database=test;";

     try
     {
         conn = new MySql.Data.MySqlClient.MySqlConnection(myConnectionString);
         conn.Open();
     }
     catch (MySql.Data.MySqlClient.MySqlException ex)
     {
         MessageBox.Show(ex.Message);
     }

Once the connection is open it can be used by the other Connector/Net
classes to communicate with the MySQL server.


File: manual.info,  Node: connector-net-programming-connecting-errors,  Next: connector-net-programming-getschema,  Prev: connector-net-programming-connecting-open,  Up: connector-net-programming-connecting-connection-string

22.2.5.4 Handling Connection Errors
...................................

Because connecting to an external server is unpredictable, it is
important to add error handling to your .NET application. When there is
an error connecting, the `MySqlConnection' class will return a
`MySqlException' object. This object has two properties that are of
interest when handling errors:

   * `Message': A message that describes the current exception.

   * `Number': The MySQL error number.

When handling errors, you can your application's response based on the
error number. The two most common error numbers when connecting are as
follows:

   * `0': Cannot connect to server.

   * `1045': Invalid user name and/or password.

The following code shows how to adapt the application's response based
on the actual error:

* Visual Basic Example *

     Dim myConnectionString as String

     myConnectionString = "server=127.0.0.1;" _
               & "uid=root;" _
               & "pwd=12345;" _
               & "database=test;"

     Try
         Dim conn As New MySql.Data.MySqlClient.MySqlConnection(myConnectionString)
         conn.Open()
     Catch ex As MySql.Data.MySqlClient.MySqlException
         Select Case ex.Number
             Case 0
                 MessageBox.Show("Cannot connect to server. Contact administrator")
             Case 1045
                 MessageBox.Show("Invalid username/password, please try again")
         End Select
     End Try

* C# Example *

     MySql.Data.MySqlClient.MySqlConnection conn;
     string myConnectionString;

     myConnectionString = "server=127.0.0.1;uid=root;" +
         "pwd=12345;database=test;";

     try
     {
         conn = new MySql.Data.MySqlClient.MySqlConnection(myConnectionString);
         conn.Open();
     }
         catch (MySql.Data.MySqlClient.MySqlException ex)
     {
         switch (ex.Number)
         {
             case 0:
                 MessageBox.Show("Cannot connect to server.  Contact administrator");
                 break;
             case 1045:
                 MessageBox.Show("Invalid username/password, please try again");
                 break;
         }
     }

*Important*:

Note that if you are using multilanguage databases you must specify the
character set in the connection string. If you do not specify the
character set, the connection defaults to the `latin1' charset. You can
specify the character set as part of the connection string, for example:

     MySqlConnection myConnection = new MySqlConnection("server=127.0.0.1;uid=root;" +
         "pwd=12345;database=test;Charset=latin1;");


File: manual.info,  Node: connector-net-programming-getschema,  Prev: connector-net-programming-connecting-errors,  Up: connector-net-programming-connecting-connection-string

22.2.5.5 Using GetSchema on a Connection
........................................

* Menu:

* connector-net-programming-getschema-collections::  Collections

The `GetSchema()' method of the connection object can be used to
retrieve schema information about the database currently connected to.
The schema information is returned in the form of a `DataTable'. The
schema information is organized into a number of collections.
Different forms of the `GetSchema()' method can be used depending on
the information required. There are three forms of the `GetSchema()'
method:

   * `GetSchema()' - This call will return a list of available
     collections.

   * `GetSchema(String)' - This call returns information about the
     collection named in the string parameter. If the string
     `MetaDataCollections' is used then a list of all available
     collections is returned. This is the same as calling `GetSchema()'
     without any parameters.

   * `GetSchema(String, String[])' - In this call the first string
     parameter represents the collection name, and the second parameter
     represents a string array of restriction values. Restriction
     values limit the amount of data that will be returned. Restriction
     values are explained in more detail in the Microsoft .NET
     documentation
     (http://msdn.microsoft.com/en-us/library/ms254934(VS.80).aspx).


File: manual.info,  Node: connector-net-programming-getschema-collections,  Prev: connector-net-programming-getschema,  Up: connector-net-programming-getschema

22.2.5.6 Collections
....................

The collections can be broadly grouped into two types: collections that
are common to all data providers, and collections specific to a
particular provider.

*Common*

The following collections are common to all data providers:

   * MetaDataCollections

   * DataSourceInformation

   * DataTypes

   * Restrictions

   * ReservedWords

*Provider-specific*

The following are the collections currently provided by MySQL
Connector/Net, in addition to the common collections above:

   * Databases

   * Tables

   * Columns

   * Users

   * Foreign Keys

   * IndexColumns

   * Indexes

   * Foreign Key Columns

   * UDF

   * Views

   * ViewColumns

   * Procedure Parameters

   * Procedures

   * Triggers

*Example Code*

A list of available collections can be obtained using the following
code:

     using System;
     using System.Data;
     using System.Text;
     using MySql.Data;
     using MySql.Data.MySqlClient;

     namespace ConsoleApplication2
     {
         class Program
         {

             private static void DisplayData(System.Data.DataTable table)
             {
                 foreach (System.Data.DataRow row in table.Rows)
                 {
                     foreach (System.Data.DataColumn col in table.Columns)
                     {
                         Console.WriteLine("{0} = {1}", col.ColumnName, row[col]);
                     }
                     Console.WriteLine("============================");
                 }
             }

             static void Main(string[] args)
             {

                 string connStr = "server=localhost;user=root;database=world;port=3306;password=******;";
                 MySqlConnection conn = new MySqlConnection(connStr);

                 try
                 {
                     Console.WriteLine("Connecting to MySQL...");
                     conn.Open();

                     DataTable table = conn.GetSchema("MetaDataCollections");
                     //DataTable table = conn.GetSchema("UDF");
                     DisplayData(table);

                     conn.Close();
                 }
                 catch (Exception ex)
                 {
                     Console.WriteLine(ex.ToString());
                 }
                 Console.WriteLine("Done.");
             }
         }
     }

Further information on the `GetSchema()' method and schema collections
can be found in the Microsoft .NET documentation
(http://msdn.microsoft.com/en-us/library/kcax58fh(VS.80).aspx).


File: manual.info,  Node: connector-net-programming-mysqlcommand,  Next: connector-net-programming-connection-pooling,  Prev: connector-net-programming-connecting-connection-string,  Up: connector-net-programming

22.2.5.7 Using MySqlCommand
...........................

A `MySqlCommand' has the `CommandText' and `CommandType' properties
associated with it. The `CommandText' will be handled differently
depending on the setting of `CommandType'. `CommandType' can be one of:

  1. Text - A SQL text command (default)

  2. StoredProcedure - The name of a Stored Procedure

  3. TableDirect - The name of a table (new in Connector/Net 6.2)

The default `CommandType', `Text', is used for executing queries and
other SQL commands. Some example of this can be found in the following
section *Note connector-net-tutorials-sql-command::.

If `CommandType' is set to `StoredProcedure', set `CommandText' to the
name of the Stored Procedure to access.

If `CommandType' is set to `TableDirect', all rows and columns of the
named table will be returned when you call one of the Execute methods.
In effect, this command performs a `SELECT *' on the table specified.
The `CommandText' property is set to the name of the table to query.
This is illustrated by the following code snippet:

     ...
     MySqlCommand cmd = new MySqlCommand();
     cmd.CommandText = "mytable";
     cmd.Connection = someConnection;
     cmd.CommandType = CommandType.TableDirect;
     MySqlDataReader reader = cmd.ExecuteReader();
     while (reader.Read())
     {
        Console.WriteLn(reader[0], reader[1]...);
     }
     ...

Examples of using the CommandType of StoredProcedure can be found in
the section *Note connector-net-programming-stored::.

Commands can have a timeout associated with them. This is useful as you
may not want a situation were a command takes up an excessive amount of
time. A timeout can be set using the `CommandTimeout' property. The
following code snippet sets a timeout of one minute:

     MySqlCommand cmd = new MySqlCommand();
     cmd.CommandTimeout = 60;

The default value is 30 seconds. Avoid a value of 0, which indicates an
indefinite wait. To change the default command timeout, use the
connection string option `Default Command Timeout'.

Prior to MySQL Connector/Net 6.2, `MySqlCommand.CommandTimeout'
included user processing time, that is processing time not related to
direct use of the connector. Timeout was implemented through a .NET
Timer, that triggered after `CommandTimeout' seconds.  This timer
consumed a thread.

MySQL Connector/Net 6.2 introduced timeouts that are aligned with how
Microsoft handles `SqlCommand.CommandTimeout'. This property is the
cumulative timeout for all network reads and writes during command
execution or processing of the results. A timeout can still occur in
the `MySqlReader.Read' method after the first row is returned, and does
not include user processing time, only IO operations. The 6.2
implementation uses the underlying stream timeout facility, so is more
efficient in that it does not require the additional timer thread as
was the case with the previous implementation.

Further details on this can be found in the relevant Microsoft
documentation
(http://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlcommand.commandtimeout.aspx).


File: manual.info,  Node: connector-net-programming-connection-pooling,  Next: connector-net-programming-authentication-windows-native,  Prev: connector-net-programming-mysqlcommand,  Up: connector-net-programming

22.2.5.8 Using Connector/Net with Connection Pooling
....................................................

The Connector/Net supports connection pooling for better performance
and scalability with database-intensive applications.  This is enabled
by default. You can turn it off or adjust its performance
characteristics using the connection string options `Pooling',
`Connection Reset', `Connection Lifetime', `Cache Server Properties',
`Max Pool Size' and `Min Pool Size'. See *Note
connector-net-programming-connecting-connection-string:: for further
information.

Connection pooling works by keeping the native connection to the server
live when the client disposes of a `MySqlConnection'. Subsequently, if
a new `MySqlConnection' object is opened, it will be created from the
connection pool, rather than creating a new native connection. This
improves performance.

* Guidelines *

To work as designed, it is best to let the connection pooling system
manage all connections. Do not create a globally accessible instance of
`MySqlConnection' and then manually open and close it. This interferes
with the way the pooling works and can lead to unpredictable results or
even exceptions.

One approach that simplifies things is to avoid manually creating a
`MySqlConnection' object. Instead use the overloaded methods that take
a connection string as an argument.  Using this approach, Connector/Net
will automatically create, open, close and destroy connections, using
the connection pooling system for best performance.

Typed Datasets and the `MembershipProvider' and `RoleProvider' classes
use this approach. Most classes that have methods that take a
`MySqlConnection' as an argument, also have methods that take a
connection string as an argument. This includes `MySqlDataAdapter'.

Instead of manually creating `MySqlCommand' objects, you can use the
static methods of the `MySqlHelper' class. These take a connection
string as an argument, and they fully support connection pooling.

* Resource Usage *

Starting with MySQL Connector/Net 6.2, there is a background job that
runs every three minutes and removes connections from pool that have
been idle (unused) for more than three minutes. The pool cleanup frees
resources on both client and server side. This is because on the client
side every connection uses a socket, and on the server side every
connection uses a socket and a thread.

Prior to this change, connections were never removed from the pool, and
the pool always contained the peak number of open connections. For
example, a web application that peaked at 1000 concurrent database
connections would consume 1000 threads and 1000 open sockets at the
server, without ever freeing up those resources from the connection
pool. Note, connections, no matter how old, will not be closed if the
number of connections in the pool is less than or equal to the value
set by the `Min Pool Size' connection string parameter.


File: manual.info,  Node: connector-net-programming-authentication-windows-native,  Next: connector-net-programming-authentication-user-plugin,  Prev: connector-net-programming-connection-pooling,  Up: connector-net-programming

22.2.5.9 Using the Windows Native Authentication Plugin
.......................................................

Connector/Net applications can authenticate to a MySQL server using the
Windows Native Authentication Plugin as of Connector/Net 6.4.4 and
MySQL 5.5.16/5.6.10. Users who have logged in to Windows can connect
from MySQL client programs to the server based on the information in
their environment without specifying an additional password. For
background and usage information about the authentication plugin, see,
*Note windows-authentication-plugin::.

The interface matches the *Note MySql.Data.MySqlClient:
connector-net-ref-mysqlclient.  object. To enable, pass in `Integrated
Security' to the connection string with a value of `yes' or `sspi'.

Passing in a user ID is optional. When Windows authentication is set
up, a MySQL user is created and configured to be used by Windows
authentication. By default, this user ID is named `auth_windows', but
can be defined using a different name. If the default name is used,
then passing the user ID to the connection string from Connector/Net is
optional, because it will use the `auth_windows' user.  Otherwise, the
name must be passed to the *Note connection string:
connector-net-programming-connecting-connection-string. using the
standard user ID element.


File: manual.info,  Node: connector-net-programming-authentication-user-plugin,  Next: connector-net-programming-tablecaching,  Prev: connector-net-programming-authentication-windows-native,  Up: connector-net-programming

22.2.5.10 Writing a Custom Authentication Plugin
................................................

Advanced users with special security requirements can create their own
authentication plugins for Connector/Net applications. You can extend
the handshake protocol, adding custom logic. This capability requires
Connector/Net 6.6.3 or higher, and MySQL 5.5.16 or higher. For
background and usage information about MySQL authentication plugins,
see, *Note authentication-plugins:: and *Note
writing-authentication-plugins::.

To write a custom authentication plugin, you will need a reference to
the assembly `MySql.Data.dll'. The classes relevant for writing
authentication plugins are available at the namespace
`MySql.Data.MySqlClient.Authentication'.

* How the Custom Authentication Plugin Works *

At some point during handshake, the internal method

     void Authenticate(bool reset)

of `MySqlAuthenticationPlugin' is called. This method in turns calls
several overridable methods of the current plugin.

* Creating the Authentication Plugin Class *

You put the authentication plugin logic inside a new class derived from
`MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin'.  The
following methods are available to be overridden:

     protected virtual void CheckConstraints()
     protected virtual void AuthenticationFailed(Exception ex)
     protected virtual void AuthenticationSuccessful()
     protected virtual byte[] MoreData(byte[] data)
     protected virtual void AuthenticationChange()
     public abstract string PluginName { get; }
     public virtual string GetUsername()
     public virtual object GetPassword()
     protected byte[] AuthData;

The following is a brief explanation of each one:


     /// <summary>
     /// This method must check authentication method specific constraints in the
     environment and throw an Exception
     /// if the conditions are not met. The default implementation does nothing.
     /// </summary>
     protected virtual void CheckConstraints()

     /// <summary>
     /// This method, called when the authentication failed, provides a chance to
     plugins to manage the error
     /// the way they consider decide (either showing a message, logging it, etc.).
     /// The default implementation wraps the original exception in a MySqlException
     with an standard message and rethrows it.
     /// </summary>
     /// <param name="ex">The exception with extra information on the error.</param>
     protected virtual void AuthenticationFailed(Exception ex)

     /// <summary>
     /// This method is invoked when the authentication phase was successful accepted
     by the server.
     /// Derived classes must override this if they want to be notified of such
     condition.
     /// </summary>
     /// <remarks>The default implementation does nothing.</remarks>
     protected virtual void AuthenticationSuccessful()

     /// <summary>
     /// This method provides a chance for the plugin to send more data when the
     server requests so during the
     /// authentication phase. This method will be called at least once, and more
     than one depending upon whether the
     /// server response packets have the 0x01 prefix.
     /// </summary>
     /// <param name="data">The response data from the server, during the
     authentication phase the first time is called is null, in
     subsequent calls contains the server response.</param>
     /// <returns>The data generated by the plugin for server consumption.</returns>
     /// <remarks>The default implementation always returns null.</remarks>
     protected virtual byte[] MoreData(byte[] data)

     /// <summary>
     /// The plugin name.
     /// </summary>
     public abstract string PluginName { get; }

     /// <summary>
     /// Gets the user name to send to the server in the authentication phase.
     /// </summary>
     /// <returns>An string with the user name</returns>
     /// <remarks>Default implementation returns the UserId passed from the
     connection string.</remarks>
     public virtual string GetUsername()

     /// <summary>
     /// Gets the password to send to the server in the authentication phase. This
     can can be an string or a
     /// </summary>
     /// <returns>An object, can be byte[], string or null, with the password.
     </returns>
     /// <remarks>Default implementation returns null.</remarks>
     public virtual object GetPassword()

     /// <summary>
     /// The authentication data passed when creating the plugin.
     /// For example in mysql_native_password this is the seed to encrypt the
     password.
     /// </summary>
     protected byte[] AuthData;

* Sample Authentication Plugin *

Here is an example showing how to create the authentication plugin,
then enable it by means of a configuration file. Follow these steps:

  1. Create a console app, adding a reference to `MySql.Data.dll'.

  2. Design the main program as follows:


          using System;
          using System.Collections.Generic;
          using System.Linq;
          using System.Text;
          using MySql.Data.MySqlClient;

          namespace AuthPluginTest
          {
            class Program
            {
              static void Main(string[] args)
              {
                // Customize the connection string as necessary.
                MySqlConnection con = new MySqlConnection("server=localhost;
          database=test; user id=myuser; password=mypass");
                con.Open();
                con.Close();
              }
            }
          }

  3. Create your plugin class. In this example, we add an `alternative'
     implementation of the Native password plugin by just using the
     same code from the original plugin. We name our class
     `MySqlNativePasswordPlugin2':


          using System.IO;
          using System;
          using System.Text;
          using System.Security.Cryptography;
          using MySql.Data.MySqlClient.Authentication;
          using System.Diagnostics;

          namespace AuthPluginTest
          {
            public class MySqlNativePasswordPlugin2 : MySqlAuthenticationPlugin
            {
              public override string PluginName
              {
                get { return "mysql_native_password"; }
              }

              public override object GetPassword()
              {
                Debug.WriteLine("Calling MySqlNativePasswordPlugin2.GetPassword");
                return Get411Password(Settings.Password, AuthData);
              }

              /// <summary>
              /// Returns a byte array containing the proper encryption of the
              /// given password/seed according to the new 4.1.1 authentication scheme.
              /// </summary>
              /// <param name="password"></param>
              /// <param name="seed"></param>
              /// <returns></returns>
              private byte[] Get411Password(string password, byte[] seedBytes)
              {
                // if we have no password, then we just return 1 zero byte
                if (password.Length == 0) return new byte[1];

                SHA1 sha = new SHA1CryptoServiceProvider();

                byte[] firstHash = sha.ComputeHash(Encoding.Default.GetBytes(password));
                byte[] secondHash = sha.ComputeHash(firstHash);

                byte[] input = new byte[seedBytes.Length + secondHash.Length];
                Array.Copy(seedBytes, 0, input, 0, seedBytes.Length);
                Array.Copy(secondHash, 0, input, seedBytes.Length, secondHash.Length);
                byte[] thirdHash = sha.ComputeHash(input);

                byte[] finalHash = new byte[thirdHash.Length + 1];
                finalHash[0] = 0x14;
                Array.Copy(thirdHash, 0, finalHash, 1, thirdHash.Length);

                for (int i = 1; i < finalHash.Length; i++)
                  finalHash[i] = (byte)(finalHash[i] ^ firstHash[i - 1]);
                return finalHash;
              }
            }
          }

  4. Notice that the plugin implementation just overrides
     `GetPassword', and provides an implementation to encrypt the
     password using the 4.1 protocol. We also put the following line in
     the `GetPassword' body:

          Debug.WriteLine("Calling MySqlNativePasswordPlugin2.GetPassword");

     to provide confirmation that the plugin was effectively used.
     (You could also put a breakpoint on that method.)

  5. Enable the new plugin in the configuration file:


          <?xml version="1.0"?>
          <configuration>
            <configSections>
              <section name="MySQL" type="MySql.Data.MySqlClient.MySqlConfiguration,
          MySql.Data"/>
            </configSections>
            <MySQL>
              <AuthenticationPlugins>
                <add name="mysql_native_password"
          type="AuthPluginTest.MySqlNativePasswordPlugin2, AuthPluginTest"></add>
              </AuthenticationPlugins>
            </MySQL>
          <startup><supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
          </startup></configuration>

  6. Run the application. In Visual Studio, you will see the message
     `Calling MySqlNativePasswordPlugin2.GetPassword' in the debug
     window.

  7. Continue enhancing the authentication logic, overriding more
     methods if you required.


File: manual.info,  Node: connector-net-programming-tablecaching,  Next: connector-net-programming-prepared,  Prev: connector-net-programming-authentication-user-plugin,  Up: connector-net-programming

22.2.5.11 Using Connector/Net with Table Caching
................................................

This feature exists with Connector/Net versions 6.4 and above.

Table caching is a feature that can be used to cache slow-changing
datasets on the client side. This is useful for applications that are
designed to use readers, but still want to minimize trips to the server
for slow-changing tables.

This feature is transparent to the application, and is disabled by
default.

* Configuration *

   * To enable table caching, add `*Note 'table cache = true':
     connector-net-connection-options.' to the connection string.

   * Optionally, specify the `*Note 'Default Table Cache Age':
     connector-net-connection-options.' connection string option, which
     represents the number of seconds a table is cached before the
     cached data is discarded. The default value is `60'.

   * You can turn caching on and off and set caching options at
     runtime, on a per-command basis.


File: manual.info,  Node: connector-net-programming-prepared,  Next: connector-net-programming-stored,  Prev: connector-net-programming-tablecaching,  Up: connector-net-programming

22.2.5.12 Using the Connector/Net with Prepared Statements
..........................................................

* Menu:

* connector-net-programming-prepared-preparing::  Preparing Statements in Connector/Net

As of MySQL 4.1, it is possible to use prepared statements with
Connector/Net. Use of prepared statements can provide significant
performance improvements on queries that are executed more than once.

Prepared execution is faster than direct execution for statements
executed more than once, primarily because the query is parsed only
once. In the case of direct execution, the query is parsed every time
it is executed. Prepared execution also can provide a reduction of
network traffic because for each execution of the prepared statement,
it is necessary only to send the data for the parameters.

Another advantage of prepared statements is that it uses a binary
protocol that makes data transfer between client and server more
efficient.


File: manual.info,  Node: connector-net-programming-prepared-preparing,  Prev: connector-net-programming-prepared,  Up: connector-net-programming-prepared

22.2.5.13 Preparing Statements in Connector/Net
...............................................

To prepare a statement, create a command object and set the
`.CommandText' property to your query.

After entering your statement, call the `.Prepare' method of the
`MySqlCommand' object. After the statement is prepared, add parameters
for each of the dynamic elements in the query.

After you enter your query and enter parameters, execute the statement
using the `.ExecuteNonQuery()', `.ExecuteScalar()', or `.ExecuteReader'
methods.

For subsequent executions, you need only modify the values of the
parameters and call the execute method again, there is no need to set
the `.CommandText' property or redefine the parameters.

* Visual Basic Example *

     Dim conn As New MySqlConnection
     Dim cmd As New MySqlCommand

     conn.ConnectionString = strConnection

     Try
        conn.Open()
        cmd.Connection = conn

        cmd.CommandText = "INSERT INTO myTable VALUES(NULL, @number, @text)"
        cmd.Prepare()

        cmd.Parameters.AddWithValue("@number", 1)
        cmd.Parameters.AddWithValue("@text", "One")

        For i = 1 To 1000
            cmd.Parameters("@number").Value = i
            cmd.Parameters("@text").Value = "A string value"

            cmd.ExecuteNonQuery()
          Next
     Catch ex As MySqlException
         MessageBox.Show("Error " & ex.Number & " has occurred: " & ex.Message, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error)
     End Try

* C# Example *

     MySql.Data.MySqlClient.MySqlConnection conn;
     MySql.Data.MySqlClient.MySqlCommand cmd;

     conn = new MySql.Data.MySqlClient.MySqlConnection();
     cmd = new MySql.Data.MySqlClient.MySqlCommand();

     conn.ConnectionString = strConnection;

     try
     {
         conn.Open();
         cmd.Connection = conn;

         cmd.CommandText = "INSERT INTO myTable VALUES(NULL, @number, @text)";
         cmd.Prepare();

         cmd.Parameters.AddWithValue("@number", 1);
         cmd.Parameters.AddWithValue("@text", "One");

         for (int i=1; i <= 1000; i++)
         {
             cmd.Parameters["@number"].Value = i;
             cmd.Parameters["@text"].Value = "A string value";

             cmd.ExecuteNonQuery();
         }
     }
     catch (MySql.Data.MySqlClient.MySqlException ex)
     {
         MessageBox.Show("Error " + ex.Number + " has occurred: " + ex.Message,
             "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
     }


File: manual.info,  Node: connector-net-programming-stored,  Next: connector-net-programming-blob,  Prev: connector-net-programming-prepared,  Up: connector-net-programming

22.2.5.14 Accessing Stored Procedures with Connector/Net
........................................................

* Menu:

* connector-net-programming-stored-using::  Using Stored Routines from Connector/Net

MySQL server version 5 and up supports stored procedures with the SQL
2003 stored procedure syntax.

A stored procedure is a set of SQL statements that is stored in the
server. Clients make a single call to the stored procedure, passing
parameters that can influence the procedure logic and query conditions,
rather than issuing individual hardcoded SQL statements.

Stored procedures can be particularly useful in situations such as the
following:

   * Stored procedures can act as an API or abstraction layer, allowing
     multiple client applications to perform the same database
     operations. The applications can be written in different languages
     and run on different platforms. The applications do not need to
     hardcode table and column names, complicated queries, and so on.
     When you extend and optimize the queries in a stored procedure,
     all the applications that call the procedure automatically receive
     the benefits.

   * When security is paramount, stored procedures keep applications
     from directly manipulating tables, or even knowing details such as
     table and column names. Banks, for example, use stored procedures
     for all common operations. This provides a consistent and secure
     environment, and procedures can ensure that each operation is
     properly logged. In such a setup, applications and users would not
     get any access to the database tables directly, but can only
     execute specific stored procedures.

Connector/Net supports the calling of stored procedures through the
`MySqlCommand' object. Data can be passed in and out of a MySQL stored
procedure through use of the `MySqlCommand.Parameters' collection.

*Note*:

When you call a stored procedure, the command object makes an
additional *Note `SELECT': select. call to determine the parameters of
the stored procedure. You must ensure that the user calling the
procedure has the `SELECT' privilege on the `mysql.proc' table to
enable them to verify the parameters. Failure to do this will result in
an error when calling the procedure.

This section will not provide in-depth information on creating Stored
Procedures. For such information, please refer to
`http://dev.mysql.com/doc/mysql/en/stored-routines.html'.

A sample application demonstrating how to use stored procedures with
Connector/Net can be found in the `Samples' directory of your
Connector/Net installation.


File: manual.info,  Node: connector-net-programming-stored-using,  Prev: connector-net-programming-stored,  Up: connector-net-programming-stored

22.2.5.15 Using Stored Routines from Connector/Net
..................................................

Stored procedures in MySQL can be created using a variety of tools.
First, stored procedures can be created using the *Note `mysql': mysql.
command-line client. Second, stored procedures can be created using
MySQL Workbench. Finally, stored procedures can be created using the
`.ExecuteNonQuery' method of the `MySqlCommand' object.

Unlike the command-line and GUI clients, you are not required to
specify a special delimiter when creating stored procedures in
Connector/Net.

To call a stored procedure using Connector/Net, you create a
`MySqlCommand' object and pass the stored procedure name as the
`.CommandText' property.  You then set the `.CommandType' property to
`CommandType.StoredProcedure'.

After the stored procedure is named, you create one `MySqlCommand'
parameter for every parameter in the stored procedure. `IN' parameters
are defined with the parameter name and the object containing the
value, `OUT' parameters are defined with the parameter name and the
data type that is expected to be returned. All parameters need the
parameter direction defined.

After defining the parameters, you call the stored procedure by using
the `MySqlCommand.ExecuteNonQuery()' method.

Once the stored procedure is called, the values of the output
parameters can be retrieved by using the `.Value' property of the
`MySqlConnector.Parameters' collection.

*Note*:

When a stored procedure is called using `MySqlCommand.ExecuteReader',
and the stored procedure has output parameters, the output parameters
are only set after the `MySqlDataReader' returned by `ExecuteReader' is
closed.

The following C# example code demonstrates the use of stored
procedures. It assumes the database 'employees' has already been
created:

     using System;
     using System.Collections.Generic;
     using System.Linq;
     using System.Text;

     using System.Data;
     using MySql.Data;
     using MySql.Data.MySqlClient;

     namespace UsingStoredRoutines
     {
         class Program
         {
             static void Main(string[] args)
             {
                 MySqlConnection conn = new MySqlConnection();
                 conn.ConnectionString = "server=localhost;user=root;database=employees;port=3306;password=******;";
                 MySqlCommand cmd = new MySqlCommand();

                 try
                 {
                     Console.WriteLine("Connecting to MySQL...");
                     conn.Open();
                     cmd.Connection = conn;
                     cmd.CommandText = "DROP PROCEDURE IF EXISTS add_emp";
                     cmd.ExecuteNonQuery();
                     cmd.CommandText = "DROP TABLE IF EXISTS emp";
                     cmd.ExecuteNonQuery();
                     cmd.CommandText = "CREATE TABLE emp (empno INT UNSIGNED NOT NULL AUTO_INCREMENT PRIMARY KEY, first_name VARCHAR(20), last_name VARCHAR(20), birthdate DATE)";
                     cmd.ExecuteNonQuery();

                     cmd.CommandText = "CREATE PROCEDURE add_emp(" +
                                       "IN fname VARCHAR(20), IN lname VARCHAR(20), IN bday DATETIME, OUT empno INT)" +
                                       "BEGIN INSERT INTO emp(first_name, last_name, birthdate) " +
                                       "VALUES(fname, lname, DATE(bday)); SET empno = LAST_INSERT_ID(); END";

                     cmd.ExecuteNonQuery();
                 }
                 catch (MySqlException ex)
                 {
                     Console.WriteLine ("Error " + ex.Number + " has occurred: " + ex.Message);
                 }
                 conn.Close();
                 Console.WriteLine("Connection closed.");
                 try
                 {
                     Console.WriteLine("Connecting to MySQL...");
                     conn.Open();
                     cmd.Connection = conn;

                     cmd.CommandText = "add_emp";
                     cmd.CommandType = CommandType.StoredProcedure;

                     cmd.Parameters.AddWithValue("@lname", "Jones");
                     cmd.Parameters["@lname"].Direction = ParameterDirection.Input;

                     cmd.Parameters.AddWithValue("@fname", "Tom");
                     cmd.Parameters["@fname"].Direction = ParameterDirection.Input;

                     cmd.Parameters.AddWithValue("@bday", "1940-06-07");
                     cmd.Parameters["@bday"].Direction = ParameterDirection.Input;

                     cmd.Parameters.AddWithValue("@empno", MySqlDbType.Int32);
                     cmd.Parameters["@empno"].Direction = ParameterDirection.Output;

                     cmd.ExecuteNonQuery();

                     Console.WriteLine("Employee number: "+cmd.Parameters["@empno"].Value);
                     Console.WriteLine("Birthday: " + cmd.Parameters["@bday"].Value);
                 }
                 catch (MySql.Data.MySqlClient.MySqlException ex)
                 {
                     Console.WriteLine("Error " + ex.Number + " has occurred: " + ex.Message);
                 }
                 conn.Close();
                 Console.WriteLine("Done.");
             }
         }
     }

The following code shows the same application in Visual Basic:


     Imports System
     Imports System.Collections.Generic
     Imports System.Linq
     Imports System.Text

     Imports System.Data
     Imports MySql.Data
     Imports MySql.Data.MySqlClient

     Module Module1

         Sub Main()
             Dim conn As New MySqlConnection()
             conn.ConnectionString = "server=localhost;user=root;database=world;port=3306;password=******;"
             Dim cmd As New MySqlCommand()

             Try
                 Console.WriteLine("Connecting to MySQL...")
                 conn.Open()
                 cmd.Connection = conn
                 cmd.CommandText = "DROP PROCEDURE IF EXISTS add_emp"
                 cmd.ExecuteNonQuery()
                 cmd.CommandText = "DROP TABLE IF EXISTS emp"
                 cmd.ExecuteNonQuery()
                 cmd.CommandText = "CREATE TABLE emp (empno INT UNSIGNED NOT NULL AUTO_INCREMENT PRIMARY KEY, first_name VARCHAR(20), last_name VARCHAR(20), birthdate DATE)"
                 cmd.ExecuteNonQuery()

                 cmd.CommandText = "CREATE PROCEDURE add_emp(" & "IN fname VARCHAR(20), IN lname VARCHAR(20), IN bday DATETIME, OUT empno INT)" & "BEGIN INSERT INTO emp(first_name, last_name, birthdate) " & "VALUES(fname, lname, DATE(bday)); SET empno = LAST_INSERT_ID(); END"

                 cmd.ExecuteNonQuery()
             Catch ex As MySqlException
                 Console.WriteLine(("Error " & ex.Number & " has occurred: ") + ex.Message)
             End Try
             conn.Close()
             Console.WriteLine("Connection closed.")
             Try
                 Console.WriteLine("Connecting to MySQL...")
                 conn.Open()
                 cmd.Connection = conn

                 cmd.CommandText = "add_emp"
                 cmd.CommandType = CommandType.StoredProcedure

                 cmd.Parameters.AddWithValue("@lname", "Jones")
                 cmd.Parameters("@lname").Direction = ParameterDirection.Input

                 cmd.Parameters.AddWithValue("@fname", "Tom")
                 cmd.Parameters("@fname").Direction = ParameterDirection.Input

                 cmd.Parameters.AddWithValue("@bday", "1940-06-07")
                 cmd.Parameters("@bday").Direction = ParameterDirection.Input

                 cmd.Parameters.AddWithValue("@empno", MySqlDbType.Int32)
                 cmd.Parameters("@empno").Direction = ParameterDirection.Output

                 cmd.ExecuteNonQuery()

                 Console.WriteLine("Employee number: " & cmd.Parameters("@empno").Value)
                 Console.WriteLine("Birthday: " & cmd.Parameters("@bday").Value)
             Catch ex As MySql.Data.MySqlClient.MySqlException
                 Console.WriteLine(("Error " & ex.Number & " has occurred: ") + ex.Message)
             End Try
             conn.Close()
             Console.WriteLine("Done.")

         End Sub

     End Module


File: manual.info,  Node: connector-net-programming-blob,  Next: connector-net-interceptors,  Prev: connector-net-programming-stored,  Up: connector-net-programming

22.2.5.16 Handling BLOB Data With Connector/Net
...............................................

* Menu:

* connector-net-programming-blob-serverprep::  Preparing the MySQL Server
* connector-net-programming-blob-writing::  Writing a File to the Database
* connector-net-programming-blob-reading::  Reading a BLOB from the Database to a File on Disk

One common use for MySQL is the storage of binary data in *Note `BLOB':
blob. columns. MySQL supports four different BLOB data types:
`TINYBLOB', `BLOB', `MEDIUMBLOB', and `LONGBLOB', all described in
*Note blob:: and *Note storage-requirements::.

Data stored in a `BLOB' column can be accessed using Connector/Net and
manipulated using client-side code. There are no special requirements
for using Connector/Net with `BLOB' data.

Simple code examples will be presented within this section, and a full
sample application can be found in the `Samples' directory of the
Connector/Net installation.


File: manual.info,  Node: connector-net-programming-blob-serverprep,  Next: connector-net-programming-blob-writing,  Prev: connector-net-programming-blob,  Up: connector-net-programming-blob

22.2.5.17 Preparing the MySQL Server
....................................

The first step is using MySQL with `BLOB' data is to configure the
server. Let's start by creating a table to be accessed. In my file
tables, I usually have four columns: an `AUTO_INCREMENT' column of
appropriate size (`UNSIGNED SMALLINT') to serve as a primary key to
identify the file, a `VARCHAR' column that stores the file name, an
`UNSIGNED MEDIUMINT' column that stores the size of the file, and a
`MEDIUMBLOB' column that stores the file itself. For this example, I
will use the following table definition:

     CREATE TABLE file(
     file_id SMALLINT UNSIGNED AUTO_INCREMENT NOT NULL PRIMARY KEY,
     file_name VARCHAR(64) NOT NULL,
     file_size MEDIUMINT UNSIGNED NOT NULL,
     file MEDIUMBLOB NOT NULL);

After creating a table, you might need to modify the
`max_allowed_packet' system variable. This variable determines how
large of a packet (that is, a single row) can be sent to the MySQL
server. By default, the server only accepts a maximum size of 1MB from
the client application.  If you intend to exceed 1MB in your file
transfers, increase this number.

The `max_allowed_packet' option can be modified using the MySQL
Workbench `Server Administration' screen. Adjust the Maximum permitted
option in the `Data / Memory size' section of the Networking tab to an
appropriate setting. After adjusting the value, click the `Apply'
button and restart the server using the `Startup / Shutdown' screen of
MySQL Workbench. You can also adjust this value directly in the
`my.cnf' file (add a line that reads `max_allowed_packet=XXM'), or use
the `SET max_allowed_packet=XXM;' syntax from within MySQL.

Try to be conservative when setting `max_allowed_packet', as transfers
of BLOB data can take some time to complete. Try to set a value that
will be adequate for your intended use and increase the value if
necessary.


File: manual.info,  Node: connector-net-programming-blob-writing,  Next: connector-net-programming-blob-reading,  Prev: connector-net-programming-blob-serverprep,  Up: connector-net-programming-blob

22.2.5.18 Writing a File to the Database
........................................

To write a file to a database, we need to convert the file to a byte
array, then use the byte array as a parameter to an *Note `INSERT':
insert. query.

The following code opens a file using a FileStream object, reads it
into a byte array, and inserts it into the `file' table:

* Visual Basic Example *

     Dim conn As New MySqlConnection
     Dim cmd As New MySqlCommand

     Dim SQL As String

     Dim FileSize As UInt32
     Dim rawData() As Byte
     Dim fs As FileStream

     conn.ConnectionString = "server=127.0.0.1;" _
         & "uid=root;" _
         & "pwd=12345;" _
         & "database=test"

     Try
         fs = New FileStream("c:\image.png", FileMode.Open, FileAccess.Read)
         FileSize = fs.Length

         rawData = New Byte(FileSize) {}
         fs.Read(rawData, 0, FileSize)
         fs.Close()

         conn.Open()

         SQL = "INSERT INTO file VALUES(NULL, @FileName, @FileSize, @File)"

         cmd.Connection = conn
         cmd.CommandText = SQL
         cmd.Parameters.AddWithValue("@FileName", strFileName)
         cmd.Parameters.AddWithValue("@FileSize", FileSize)
         cmd.Parameters.AddWithValue("@File", rawData)

         cmd.ExecuteNonQuery()

         MessageBox.Show("File Inserted into database successfully!", _
         "Success!", MessageBoxButtons.OK, MessageBoxIcon.Asterisk)

         conn.Close()
     Catch ex As Exception
         MessageBox.Show("There was an error: " & ex.Message, "Error", _
             MessageBoxButtons.OK, MessageBoxIcon.Error)
     End Try

* C# Example *

     MySql.Data.MySqlClient.MySqlConnection conn;
     MySql.Data.MySqlClient.MySqlCommand cmd;

     conn = new MySql.Data.MySqlClient.MySqlConnection();
     cmd = new MySql.Data.MySqlClient.MySqlCommand();

     string SQL;
     UInt32 FileSize;
     byte[] rawData;
     FileStream fs;

     conn.ConnectionString = "server=127.0.0.1;uid=root;" +
         "pwd=12345;database=test;";

     try
     {
         fs = new FileStream(@"c:\image.png", FileMode.Open, FileAccess.Read);
         FileSize = fs.Length;

         rawData = new byte[FileSize];
         fs.Read(rawData, 0, FileSize);
         fs.Close();

         conn.Open();

         SQL = "INSERT INTO file VALUES(NULL, @FileName, @FileSize, @File)";

         cmd.Connection = conn;
         cmd.CommandText = SQL;
         cmd.Parameters.AddWithValue("@FileName", strFileName);
         cmd.Parameters.AddWithValue("@FileSize", FileSize);
         cmd.Parameters.AddWithValue("@File", rawData);

         cmd.ExecuteNonQuery();

         MessageBox.Show("File Inserted into database successfully!",
             "Success!", MessageBoxButtons.OK, MessageBoxIcon.Asterisk);

         conn.Close();
     }
     catch (MySql.Data.MySqlClient.MySqlException ex)
     {
         MessageBox.Show("Error " + ex.Number + " has occurred: " + ex.Message,
             "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
     }

The `Read' method of the `FileStream' object is used to load the file
into a byte array which is sized according to the `Length' property of
the `FileStream' object.

After assigning the byte array as a parameter of the `MySqlCommand'
object, the `ExecuteNonQuery' method is called and the `BLOB' is
inserted into the `file' table.


File: manual.info,  Node: connector-net-programming-blob-reading,  Prev: connector-net-programming-blob-writing,  Up: connector-net-programming-blob

22.2.5.19 Reading a BLOB from the Database to a File on Disk
............................................................

Once a file is loaded into the `file' table, we can use the
`MySqlDataReader' class to retrieve it.

The following code retrieves a row from the `file' table, then loads
the data into a `FileStream' object to be written to disk:

* Visual Basic Example *

     Dim conn As New MySqlConnection
     Dim cmd As New MySqlCommand
     Dim myData As MySqlDataReader
     Dim SQL As String
     Dim rawData() As Byte
     Dim FileSize As UInt32
     Dim fs As FileStream

     conn.ConnectionString = "server=127.0.0.1;" _
         & "uid=root;" _
         & "pwd=12345;" _
         & "database=test"

     SQL = "SELECT file_name, file_size, file FROM file"

     Try
         conn.Open()

         cmd.Connection = conn
         cmd.CommandText = SQL

         myData = cmd.ExecuteReader

         If Not myData.HasRows Then Throw New Exception("There are no BLOBs to save")

         myData.Read()

         FileSize = myData.GetUInt32(myData.GetOrdinal("file_size"))
         rawData = New Byte(FileSize) {}

         myData.GetBytes(myData.GetOrdinal("file"), 0, rawData, 0, FileSize)

         fs = New FileStream("C:\newfile.png", FileMode.OpenOrCreate, FileAccess.Write)
         fs.Write(rawData, 0, FileSize)
         fs.Close()

         MessageBox.Show("File successfully written to disk!", "Success!", MessageBoxButtons.OK, MessageBoxIcon.Asterisk)

         myData.Close()
         conn.Close()
     Catch ex As Exception
         MessageBox.Show("There was an error: " & ex.Message, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error)
     End Try

* C# Example *

     MySql.Data.MySqlClient.MySqlConnection conn;
     MySql.Data.MySqlClient.MySqlCommand cmd;
     MySql.Data.MySqlClient.MySqlDataReader myData;

     conn = new MySql.Data.MySqlClient.MySqlConnection();
     cmd = new MySql.Data.MySqlClient.MySqlCommand();

     string SQL;
     UInt32 FileSize;
     byte[] rawData;
     FileStream fs;

     conn.ConnectionString = "server=127.0.0.1;uid=root;" +
         "pwd=12345;database=test;";

     SQL = "SELECT file_name, file_size, file FROM file";

     try
     {
         conn.Open();

         cmd.Connection = conn;
         cmd.CommandText = SQL;

         myData = cmd.ExecuteReader();

         if (! myData.HasRows)
             throw new Exception("There are no BLOBs to save");

         myData.Read();

         FileSize = myData.GetUInt32(myData.GetOrdinal("file_size"));
         rawData = new byte[FileSize];

         myData.GetBytes(myData.GetOrdinal("file"), 0, rawData, 0, (int)FileSize);

         fs = new FileStream(@"C:\newfile.png", FileMode.OpenOrCreate, FileAccess.Write);
         fs.Write(rawData, 0, (int)FileSize);
         fs.Close();

         MessageBox.Show("File successfully written to disk!",
             "Success!", MessageBoxButtons.OK, MessageBoxIcon.Asterisk);

         myData.Close();
         conn.Close();
     }
     catch (MySql.Data.MySqlClient.MySqlException ex)
     {
         MessageBox.Show("Error " + ex.Number + " has occurred: " + ex.Message,
             "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
     }

After connecting, the contents of the `file' table are loaded into a
`MySqlDataReader' object. The `GetBytes' method of the
`MySqlDataReader' is used to load the `BLOB' into a byte array, which
is then written to disk using a `FileStream' object.

The `GetOrdinal' method of the MySqlDataReader can be used to determine
the integer index of a named column.  Use of the GetOrdinal method
prevents errors if the column order of the *Note `SELECT': select.
query is changed.


File: manual.info,  Node: connector-net-interceptors,  Next: connector-net-programming-datetime,  Prev: connector-net-programming-blob,  Up: connector-net-programming

22.2.5.20 Using the Connector/Net Interceptor Classes
.....................................................

An interceptor is a software design pattern that provides a transparent
way to extend or modify some aspect of a program, similar to a user
exit. No recompiling is required. With Connector/Net, the interceptors
are enabled and disabled by updating the connection string to refer to
different sets of interceptor classes that you instantiate.

Connector/Net includes the following interceptor classes:

   * The *Note `BaseCommandInterceptor':
     connector-net-ref-mysqlclient-basecommandinterceptor.  lets you
     perform additional operations when a program issues a SQL command.
     For example, you can examine the SQL statement for logging or
     debugging purposes, substitute your own result set to implement a
     caching mechanism, and so on. Depending on the use case, your code
     can supplement the SQL command or replace it entirely.

     The `BaseCommandInterceptor' class has these methods that you can
     override:

          public virtual bool ExecuteScalar(string sql, ref object returnValue);
          public virtual bool ExecuteNonQuery(string sql, ref int returnValue);
          public virtual bool ExecuteReader(string sql, CommandBehavior behavior, ref MySqlDataReader returnValue);
          public virtual void Init(MySqlConnection connection);

     If your interceptor overrides one of the `Execute...' methods, set
     the `returnValue' output parameter and return `true' if you
     handled the event, or `false' if you did not handle the event. The
     SQL command is processed normally only when all command
     interceptors return `false'.

     The connection passed to the `Init' method is the connection that
     is attached to this interceptor.

   * The *Note `BaseExceptionInterceptor':
     connector-net-ref-mysqlclient-baseexceptioninterceptor.  lets you
     perform additional operations when a program encounters a SQL
     exception. The exception interception mechanism is modeled after
     the Connector/J model. You can code an interceptor class and
     connect it to an existing program without recompiling, and
     intercept exceptions when they are created. You can then change
     the exception type and optionally attach information to it. This
     capability lets you turn on and off logging and debugging code
     without hardcoding anything in the application. This technique
     applies to exceptions raised at the SQL level, not to lower-level
     system or I/O errors.

     You develop an exception interceptor first by creating a subclass
     of the `BaseExceptionInterceptor' class. You must override the
     `InterceptException()' method. You can also override the `Init()'
     method to do some one-time initialization.

     Each exception interceptor has 2 methods:

          public abstract Exception InterceptException(Exception exception,
            MySqlConnection connection);
          public virtual void Init(MySqlConnection connection);

     The connection passed to `Init()' is the connection that is
     attached to this interceptor.

     Each interceptor is required to override `InterceptException' and
     return an exception.  It can return the exception it is given, or
     it can wrap it in a new exception. We currently do not offer the
     ability to suppress the exception.

Here are examples of using the FQN (fully qualified name) on the
connection string:

     MySqlConnection c1 = new MySqlConnection(@"server=localhost;pooling=false;
     commandinterceptors=CommandApp.MyCommandInterceptor,CommandApp");

     MySqlConnection c2 = new MySqlConnection(@"server=localhost;pooling=false;
     exceptioninterceptors=ExceptionStackTraceTest.MyExceptionInterceptor,ExceptionStackTraceTest");

In this example, the command interceptor is called
`CommandApp.MyCommandInterceptor' and exists in the `CommandApp'
assembly. The exception interceptor is called
`ExceptionStackTraceTest.MyExceptionInterceptor' and exists in the
`ExceptionStackTraceTest' assembly.

To shorten the connection string, you can register your exception
interceptors in your `app.config' or `web.config' file like this:


     <configSections>
     <section name="MySQL" type="MySql.Data.MySqlClient.MySqlConfiguration,
     MySql.Data"/>
     </configSections>
     <MySQL>
     <CommandInterceptors>
       <add name="myC" type="CommandApp.MyCommandInterceptor,CommandApp" />
     </CommandInterceptors>
     </MySQL>

     <configSections>
     <section name="MySQL" type="MySql.Data.MySqlClient.MySqlConfiguration,
     MySql.Data"/>
     </configSections>
     <MySQL>
     <ExceptionInterceptors>
       <add name="myE"
     type="ExceptionStackTraceTest.MyExceptionInterceptor,ExceptionStackTraceTest" />
     </ExceptionInterceptors>
     </MySQL>

Once you have done that, your connection strings can look like these:

     MySqlConnection c1 = new MySqlConnection(@"server=localhost;pooling=false;
     commandinterceptors=myC");

     MySqlConnection c2 = new MySqlConnection(@"server=localhost;pooling=false;
     exceptioninterceptors=myE");


File: manual.info,  Node: connector-net-programming-datetime,  Next: connector-net-programming-bulk-loader,  Prev: connector-net-interceptors,  Up: connector-net-programming

22.2.5.21 Handling Date and Time Information in Connector/Net
.............................................................

* Menu:

* connector-net-programming-datetime-fractional::  Fractional Seconds
* connector-net-programming-datetime-problems::  Problems when Using Invalid Dates
* connector-net-programming-datetime-restricting::  Restricting Invalid Dates
* connector-net-programming-datetime-invalid::  Handling Invalid Dates
* connector-net-programming-datetime-null::  Handling NULL Dates

MySQL and the .NET languages handle date and time information
differently, with MySQL allowing dates that cannot be represented by a
.NET data type, such as '`0000-00-00 00:00:00''. These differences can
cause problems if not properly handled.

The following sections demonstrate how to properly handle date and time
information when using Connector/Net.


File: manual.info,  Node: connector-net-programming-datetime-fractional,  Next: connector-net-programming-datetime-problems,  Prev: connector-net-programming-datetime,  Up: connector-net-programming-datetime

22.2.5.22 Fractional Seconds
............................

Connector/Net 6.5 and higher support the fractional seconds feature
introduced in MySQL 5.6.4. Fractional seconds could always be specified
in a date literal or passed back and forth as parameters and return
values, but the fractional part was always stripped off when stored in
a table column. In MySQL 5.6.4 and higher, the fractional part is now
preserved in data stored and retrieved through SQL. For fractional
second handling in MySQL 5.6.4 and higher, see Fractional Seconds in
Time Values
(http://dev.mysql.com/doc/refman/5.6/en/fractional-seconds.html). For
the behavior of fractional seconds prior to MySQL 5.6.4, see *Note
fractional-seconds::.

To use the more precise date and time types, specify a value from 1 to
6 when creating the table column, for example `TIME(3)' or
`DATETIME(6)', representing the number of digits of precision after the
decimal point. Specifying a precision of 0 leaves the fractional part
out entirely. In your C# or Visual Basic code, refer to the
`Millisecond' member to retrieve the fractional second value from the
`MySqlDateTime' object returned by the `GetMySqlDateTime' function.
The `DateTime' object returned by the `GetDateTime' function also
contains the fractional value, but only the first 3 digits.

For related code examples, see the following blog post:
`https://blogs.oracle.com/MySqlOnWindows/entry/milliseconds_value_support_on_datetime'


File: manual.info,  Node: connector-net-programming-datetime-problems,  Next: connector-net-programming-datetime-restricting,  Prev: connector-net-programming-datetime-fractional,  Up: connector-net-programming-datetime

22.2.5.23 Problems when Using Invalid Dates
...........................................

The differences in date handling can cause problems for developers who
use invalid dates. Invalid MySQL dates cannot be loaded into native
.NET `DateTime' objects, including `NULL' dates.

Because of this issue, .NET `DataSet' objects cannot be populated by
the `Fill' method of the `MySqlDataAdapter' class as invalid dates will
cause a `System.ArgumentOutOfRangeException' exception to occur.


File: manual.info,  Node: connector-net-programming-datetime-restricting,  Next: connector-net-programming-datetime-invalid,  Prev: connector-net-programming-datetime-problems,  Up: connector-net-programming-datetime

22.2.5.24 Restricting Invalid Dates
...................................

The best solution to the date problem is to restrict users from
entering invalid dates. This can be done on either the client or the
server side.

Restricting invalid dates on the client side is as simple as always
using the .NET `DateTime' class to handle dates. The `DateTime' class
will only allow valid dates, ensuring that the values in your database
are also valid. The disadvantage of this is that it is not useful in a
mixed environment where .NET and non .NET code are used to manipulate
the database, as each application must perform its own date validation.

Users of MySQL 5.0.2 and higher can use the new `traditional' SQL mode
to restrict invalid date values. For information on using the
`traditional' SQL mode, see *Note server-sql-mode::.


File: manual.info,  Node: connector-net-programming-datetime-invalid,  Next: connector-net-programming-datetime-null,  Prev: connector-net-programming-datetime-restricting,  Up: connector-net-programming-datetime

22.2.5.25 Handling Invalid Dates
................................

Although it is strongly recommended that you avoid the use of invalid
dates within your .NET application, it is possible to use invalid dates
by means of the `MySqlDateTime' data type.

The `MySqlDateTime' data type supports the same date values that are
supported by the MySQL server. The default behavior of Connector/Net is
to return a .NET DateTime object for valid date values, and return an
error for invalid dates.  This default can be modified to cause
Connector/Net to return `MySqlDateTime' objects for invalid dates.

To instruct Connector/Net to return a `MySqlDateTime' object for
invalid dates, add the following line to your connection string:

     Allow Zero Datetime=True

Please note that the use of the `MySqlDateTime' class can still be
problematic. The following are some known issues:

  1. Data binding for invalid dates can still cause errors (zero dates
     like 0000-00-00 do not seem to have this problem).

  2. The `ToString' method return a date formatted in the standard
     MySQL format (for example, `2005-02-23 08:50:25'). This differs
     from the `ToString' behavior of the .NET DateTime class.

  3. The `MySqlDateTime' class supports NULL dates, while the .NET
     DateTime class does not. This can cause errors when trying to
     convert a MySQLDateTime to a DateTime if you do not check for NULL
     first.

Because of the known issues, the best recommendation is still to use
only valid dates in your application.


File: manual.info,  Node: connector-net-programming-datetime-null,  Prev: connector-net-programming-datetime-invalid,  Up: connector-net-programming-datetime

22.2.5.26 Handling NULL Dates
.............................

The .NET `DateTime' data type cannot handle `NULL' values. As such,
when assigning values from a query to a `DateTime' variable, you must
first check whether the value is in fact `NULL'.

When using a `MySqlDataReader', use the `.IsDBNull' method to check
whether a value is `NULL' before making the assignment:

* Visual Basic Example *

     If Not myReader.IsDBNull(myReader.GetOrdinal("mytime")) Then
         myTime = myReader.GetDateTime(myReader.GetOrdinal("mytime"))
     Else
         myTime = DateTime.MinValue
     End If

* C# Example *

     if (! myReader.IsDBNull(myReader.GetOrdinal("mytime")))
         myTime = myReader.GetDateTime(myReader.GetOrdinal("mytime"));
     else
         myTime = DateTime.MinValue;

`NULL' values will work in a data set and can be bound to form controls
without special handling.


File: manual.info,  Node: connector-net-programming-bulk-loader,  Next: connector-net-programming-tracing,  Prev: connector-net-programming-datetime,  Up: connector-net-programming

22.2.5.27 Using the `MySqlBulkLoader' Class
...........................................

MySQL Connector/Net features a bulk loader class that wraps the MySQL
statement *Note `LOAD DATA INFILE': load-data. This gives MySQL
Connector/Net the ability to load a data file from a local or remote
host to the server. The class concerned is `MySqlBulkLoader'. This
class has various methods, the main one being `load' to cause the
specified file to be loaded to the server. Various parameters can be
set to control how the data file is processed.  This is achieved
through setting various properties of the class.  For example, the
field separator used, such as comma or tab, can be specified, along
with the record terminator, such as newline.

The following code shows a simple example of using the
`MySqlBulkLoader' class. First an empty table needs to be created, in
this case in the `test' database:

     CREATE TABLE Career (
            Name VARCHAR(100) NOT NULL,
            Age INTEGER,
            Profession VARCHAR(200)
     );

A simple tab-delimited data file is also created (it could use any
other field delimiter such as comma):

     Table Career in Test Database
     Name  Age  Profession

     Tony  47  Technical Writer
     Ana  43  Nurse
     Fred  21  IT Specialist
     Simon  45  Hairy Biker

Note that with this test file the first three lines will need to be
ignored, as they do not contain table data. This can be achieved using
the `NumberOfLinesToSkip' property. This file can then be loaded and
used to populate the `Career' table in the `test' database:

     using System;
     using System.Text;
     using MySql.Data;
     using MySql.Data.MySqlClient;

     namespace ConsoleApplication1
     {
         class Program
         {
             static void Main(string[] args)
             {

                 string connStr = "server=localhost;user=root;database=test;port=3306;password=******;";
                 MySqlConnection conn = new MySqlConnection(connStr);

                 MySqlBulkLoader bl = new MySqlBulkLoader(conn);
                 bl.TableName = "Career";
                 bl.FieldTerminator = "\t";
                 bl.LineTerminator = "\n";
                 bl.FileName = "c:/career_data.txt";
                 bl.NumberOfLinesToSkip = 3;

                 try
                 {
                     Console.WriteLine("Connecting to MySQL...");
                     conn.Open();

                     // Upload data from file
                     int count = bl.Load();
                     Console.WriteLine(count + " lines uploaded.");

                     string sql = "SELECT Name, Age, Profession FROM Career";
                     MySqlCommand cmd = new MySqlCommand(sql, conn);
                     MySqlDataReader rdr = cmd.ExecuteReader();

                     while (rdr.Read())
                     {
                         Console.WriteLine(rdr[0] + " -- " + rdr[1] + " -- " + rdr[2]);
                     }

                     rdr.Close();

                     conn.Close();
                 }
                 catch (Exception ex)
                 {
                     Console.WriteLine(ex.ToString());
                 }
                 Console.WriteLine("Done.");
             }
         }
     }

Further information on `LOAD DATA INFILE' can be found in *Note
load-data::. Further information on `MySqlBulkLoader' can be found in
the reference documentation that was included with your connector.


File: manual.info,  Node: connector-net-programming-tracing,  Next: connector-net-programming-binary-issues,  Prev: connector-net-programming-bulk-loader,  Up: connector-net-programming

22.2.5.28 Using the MySQL Connector/Net Trace Source Object
...........................................................

* Menu:

* connector-net-programming-tracing-mysql::  Viewing MySQL Trace Information
* connector-net-programming-tracing-mysql-custom-listeners::  Building Custom Listeners

MySQL Connector/Net 6.2 introduced support for .NET 2.0 compatible
tracing, using `TraceSource' objects.

The .NET 2.0 tracing architecture consists of four main parts:

   * _Source_ - This is the originator of the trace information. The
     source is used to send trace messages.  The name of the source
     provided by MySQL Connector/Net is `mysql'.

   * _Switch_ - This defines the level of trace information to emit.
     Typically, this is specified in the `app.config' file, so that it
     is not necessary to recompile an application to change the trace
     level.

   * _Listener_ - Trace listeners define where the trace information
     will be written to. Supported listeners include, for example, the
     Visual Studio Output window, the Windows Event Log, and the
     console.

   * _Filter_ - Filters can be attached to listeners. Filters determine
     the level of trace information that will be written. While a
     switch defines the level of information that will be written to
     all listeners, a filter can be applied on a per-listener basis,
     giving finer grained control of trace information.

To use tracing a `TraceSource' object first needs to be created. To
create a `TraceSource' object in MySQL Connector/Net you would use code
similar to the following:

     TraceSource ts = new TraceSource("mysql");

To enable trace messages, configure a trace switch. There are three
main switch classes, `BooleanSwitch', `SourceSwitch', and
`TraceSwitch'. Trace switches also have associated with them a trace
level enumeration, these are `Off', `Error', `Warning', `Info', and
`Verbose'. The following code snippet illustrates creating a switch:

     ts.Switch = new SourceSwitch("MySwitch", "Verbose");

This creates a `SourceSwitch', called `MySwitch', and sets the trace
level to `Verbose', meaning that all trace messages will be written.

It is convenient to be able to change the trace level without having to
recompile the code. This is achieved by specifying the trace level in
application configuration file, `app.config'. You then simply need to
specify the desired trace level in the configuration file and restart
the application. The trace source is configured within the
`system.diagnostics' section of the file. The following XML snippet
illustrates this:


     <configuration>
       ...
       <system.diagnostics>
         <sources>
           <source name="mysql" switchName="MySwitch"
                   switchType="System.Diagnostics.SourceSwitch" />
           ...
         </sources>
         <switches>
           <add name="MySwitch" value="Verbose"/>
           ...
         </switches>
       </system.diagnostics>
       ...
     </configuration>

By default, trace information is written to the Output window of
Microsoft Visual Studio. There are a wide range of listeners that can
be attached to the trace source, so that trace messages can be written
out to various destinations. You can also create custom listeners to
allow trace messages to be written to other destinations as mobile
devices and web services. A commonly used example of a listener is
`ConsoleTraceListener', which writes trace messages to the console.

To add a listener at runtime, use code such as the following:

     ts.Listeners.Add(new ConsoleTraceListener());

Then, call methods on the trace source object to generate trace
information. For example, the `TraceInformation()', `TraceEvent()', or
`TraceData()' methods can be used.

The `TraceInformation()' method simply prints a string passed as a
parameter. The `TraceEvent()' method, as well as the optional
informational string, requires a `TraceEventType' value to be passed to
indicate the trace message type, and also an application specific ID.
The `TraceEventType' can have a value of `Verbose', `Information',
`Warning', `Error', and `Critical'. Using the `TraceData()' method you
can pass any object, for example an exception object, instead of a
message.

To ensure than these generated trace messages gets flushed from the
trace source buffers to listeners, invoke the `Flush()' method. When
you are finished using a trace source, call the `Close()' method. The
`Close()' method first calls `Flush()', to ensure any remaining data is
written out. It then frees up resources, and closes the listeners
associated with the trace source.

     ts.TraceInformation("Informational message");
     ts.TraceEvent(TraceEventType.Error, 3, "Optional error message");
     ts.TraceData(TraceEventType.Error, 3, ex); // pass exception object
     ts.Flush();
     ...
     ts.Close();


File: manual.info,  Node: connector-net-programming-tracing-mysql,  Next: connector-net-programming-tracing-mysql-custom-listeners,  Prev: connector-net-programming-tracing,  Up: connector-net-programming-tracing

22.2.5.29 Viewing MySQL Trace Information
.........................................

This section describes how to set up your application to view MySQL
trace information.

The first thing you need to do is create a suitable `app.config' file
for your application. An example is shown in the following code:


     <?xml version="1.0" encoding="utf-8" ?>
     <configuration>
       <system.diagnostics>
         <sources>
           <source name="mysql" switchName="SourceSwitch"
             switchType="System.Diagnostics.SourceSwitch" >
             <listeners>
               <add name="console" />
               <remove name ="Default" />
             </listeners>
           </source>
         </sources>
         <switches>
           <!-- You can set the level at which tracing is to occur -->
           <add name="SourceSwitch" value="Verbose" />
           <!-- You can turn tracing off -->
           <!--add name="SourceSwitch" value="Off" -->
         </switches>
         <sharedListeners>
           <add name="console"
             type="System.Diagnostics.ConsoleTraceListener"
             initializeData="false"/>
         </sharedListeners>
       </system.diagnostics>
     </configuration>

This ensures a suitable trace source is created, along with a switch.
The switch level in this case is set to `Verbose' to display the
maximum amount of information.

In the application the only other step required is to add
`logging=true' to the connection string. An example application could
be:

     using System;
     using System.Collections.Generic;
     using System.Linq;
     using System.Text;
     using System.Diagnostics;
     using MySql.Data;
     using MySql.Data.MySqlClient;
     using MySql.Web;

     namespace ConsoleApplication1
     {
         class Program
         {
             static void Main(string[] args)
             {

                 string connStr = "server=localhost;user=root;database=world;port=3306;password=******;logging=true;";
                 MySqlConnection conn = new MySqlConnection(connStr);
                 try
                 {
                     Console.WriteLine("Connecting to MySQL...");
                     conn.Open();

                     string sql = "SELECT Name, HeadOfState FROM Country WHERE Continent='Oceania'";
                     MySqlCommand cmd = new MySqlCommand(sql, conn);
                     MySqlDataReader rdr = cmd.ExecuteReader();

                     while (rdr.Read())
                     {
                         Console.WriteLine(rdr[0] + " -- " + rdr[1]);
                     }

                     rdr.Close();

                     conn.Close();
                 }
                 catch (Exception ex)
                 {
                     Console.WriteLine(ex.ToString());
                 }
                 Console.WriteLine("Done.");
             }
         }
     }

This simple application will then generate the following output:

     Connecting to MySQL...
     mysql Information: 1 : 1: Connection Opened: connection string = 'server=localhost;User Id=root;database=world;port=3306
     ;password=******;logging=True'
     mysql Information: 3 : 1: Query Opened: SHOW VARIABLES
     mysql Information: 4 : 1: Resultset Opened: field(s) = 2, affected rows = -1, inserted id = -1
     mysql Information: 5 : 1: Resultset Closed. Total rows=272, skipped rows=0, size (bytes)=7058
     mysql Information: 6 : 1: Query Closed
     mysql Information: 3 : 1: Query Opened: SHOW COLLATION
     mysql Information: 4 : 1: Resultset Opened: field(s) = 6, affected rows = -1, inserted id = -1
     mysql Information: 5 : 1: Resultset Closed. Total rows=127, skipped rows=0, size (bytes)=4102
     mysql Information: 6 : 1: Query Closed
     mysql Information: 3 : 1: Query Opened: SET character_set_results=NULL
     mysql Information: 4 : 1: Resultset Opened: field(s) = 0, affected rows = 0, inserted id = 0
     mysql Information: 5 : 1: Resultset Closed. Total rows=0, skipped rows=0, size (bytes)=0
     mysql Information: 6 : 1: Query Closed
     mysql Information: 10 : 1: Set Database: world
     mysql Information: 3 : 1: Query Opened: SELECT Name, HeadOfState FROM Country WHERE Continent='Oceania'
     mysql Information: 4 : 1: Resultset Opened: field(s) = 2, affected rows = -1, inserted id = -1
     American Samoa -- George W. Bush
     Australia -- Elisabeth II
     ...
     Wallis and Futuna -- Jacques Chirac
     Vanuatu -- John Bani
     United States Minor Outlying Islands -- George W. Bush
     mysql Information: 5 : 1: Resultset Closed. Total rows=28, skipped rows=0, size (bytes)=788
     mysql Information: 6 : 1: Query Closed
     Done.
     mysql Information: 2 : 1: Connection Closed

The first number displayed in the trace message corresponds to the
MySQL event type:

Explains the MySQL event types, specified by the first number displayed
in each trace message.

Event                  Description
1                      ConnectionOpened: connection string
2                      ConnectionClosed:
3                      QueryOpened: mysql server thread
                       id, query text
4                      ResultOpened: field count, affected
                       rows (-1 if select), inserted id (-1
                       if select)
5                      ResultClosed: total rows read, rows
                       skipped, size of resultset in bytes
6                      QueryClosed:
7                      StatementPrepared: prepared sql,
                       statement id
8                      StatementExecuted: statement id,
                       mysql server thread id
9                      StatementClosed: statement id
10                     NonQuery: [varies]
11                     UsageAdvisorWarning: usage advisor
                       flag. NoIndex = 1, BadIndex = 2,
                       SkippedRows = 3, SkippedColumns =
                       4, FieldConversion = 5.
12                     Warning: level, code, message
13                     Error: error number, error message

The second number displayed in the trace message is the connection
count.

Although this example uses the `ConsoleTraceListener', any of the other
standard listeners could have been used. Another possibility is to
create a custom listener that uses the information passed using the
`TraceEvent' method. For example, a custom trace listener could be
created to perform active monitoring of the MySQL event messages,
rather than simply writing these to an output device.

It is also possible to add listeners to the MySQL Trace Source at
runtime. This can be done with the following code:

     MySqlTrace.Listeners.Add(new ConsoleTraceListener());

MySQL Connector/Net 6.3.2 introduced the ability to switch tracing on
and off at runtime. This can be achieved using the calls
`MySqlTrace.EnableQueryAnalyzer(string host, int postInterval)' and
`MySqlTrace.DisableQueryAnalyzer()'. The parameter `host' is the URL of
the MySQL Enterprise Monitor server to monitor. The parameter
`postInterval' is how often to post the data to MySQL Enterprise
Monitor, in seconds.


File: manual.info,  Node: connector-net-programming-tracing-mysql-custom-listeners,  Prev: connector-net-programming-tracing-mysql,  Up: connector-net-programming-tracing

22.2.5.30 Building Custom Listeners
...................................

To build custom listeners that work with the MySQL Connector/Net Trace
Source, it is necessary to understand the key methods used, and the
event data formats used.

The main method involved in passing trace messages is the
`TraceSource.TraceEvent' method. This has the prototype:

     public void TraceEvent(
         TraceEventType eventType,
         int id,
         string format,
         params Object[] args
     )

This trace source method will process the list of attached listeners
and call the listener's `TraceListener.TraceEvent' method. The
prototype for the `TraceListener.TraceEvent' method is as follows:

     public virtual void TraceEvent(
         TraceEventCache eventCache,
         string source,
         TraceEventType eventType,
         int id,
         string format,
         params Object[] args
     )

The first three parameters are used in the standard as defined by
Microsoft (http://msdn.microsoft.com/en-us/library/d193webf.aspx). The
last three parameters contain MySQL-specific trace information. Each of
these parameters is now discussed in more detail.

*`int id'*

This is a MySQL-specific identifier. It identifies the MySQL event type
that has occurred, resulting in a trace message being generated. This
value is defined by the `MySqlTraceEventType' public enum contained in
the MySQL Connector/Net code:

     public enum MySqlTraceEventType : int
     {
         ConnectionOpened = 1,
         ConnectionClosed,
         QueryOpened,
         ResultOpened,
         ResultClosed,
         QueryClosed,
         StatementPrepared,
         StatementExecuted,
         StatementClosed,
         NonQuery,
         UsageAdvisorWarning,
         Warning,
         Error
     }

The MySQL event type also determines the contents passed using the
parameter `params Object[] args'. The nature of the `args' parameters
are described in further detail in the following material.

*`string format'*

This is the format string that contains zero or more format items,
which correspond to objects in the args array. This would be used by a
listener such as `ConsoleTraceListener' to write a message to the
output device.

*`params Object[] args'*

This is a list of objects that depends on the MySQL event type, `id'.
However, the first parameter passed using this list is always the
driver id. The driver id is a unique number that is incremented each
time the connector is opened.  This enables groups of queries on the
same connection to be identified. The parameters that follow driver id
depend on the MySQL event id, and are as follows:

Meanings of second and subsequent elements in the
`TraceListener.TraceEvent' `args' parameter array.

MySQL-specific event   Arguments (params Object[] args)
type                   
ConnectionOpened       Connection string
ConnectionClosed       No additional parameters
QueryOpened            mysql server thread id, query text
ResultOpened           field count, affected rows (-1 if
                       select), inserted id (-1 if select)
ResultClosed           total rows read, rows skipped, size
                       of resultset in bytes
QueryClosed            No additional parameters
StatementPrepared      prepared sql, statement id
StatementExecuted      statement id, mysql server thread id
StatementClosed        statement id
NonQuery               Varies
UsageAdvisorWarning    usage advisor flag. NoIndex = 1,
                       BadIndex = 2, SkippedRows = 3,
                       SkippedColumns = 4, FieldConversion
                       = 5.
Warning                level, code, message
Error                  error number, error message

This information will allow you to create custom trace listeners that
can actively monitor the MySQL-specific events.


File: manual.info,  Node: connector-net-programming-binary-issues,  Next: connector-net-using-character-sets,  Prev: connector-net-programming-tracing,  Up: connector-net-programming

22.2.5.31 Binary/Nonbinary Issues
.................................

There are certain situations where MySQL will return incorrect metadata
about one or more columns. More specifically, the server will sometimes
report that a column is binary when it is not and vice versa. In these
situations, it becomes practically impossible for the connector to be
able to correctly identify the correct metadata.

Some examples of situations that may return incorrect metadata are:

   * Execution of *Note `SHOW PROCESSLIST': show-processlist.  Some of
     the columns will be returned as binary even though they only hold
     string data.

   * When a temporary table is used to process a resultset, some
     columns may be returned with incorrect binary flags.

   * Some server functions such `DATE_FORMAT' will incorrectly return
     the column as binary.

With the availability of `BINARY' and `VARBINARY' data types, it is
important that we respect the metadata returned by the server. However,
we are aware that some existing applications may break with this
change, so we are creating a connection string option to enable or
disable it.  By default, Connector/Net 5.1 respects the binary flags
returned by the server. You might need to make small changes to your
application to accommodate this change.

In the event that the changes required to your application would be too
large, adding `'respect binary flags=false'' to your connection string
causes the connector to use the prior behavior: any column that is
marked as string, regardless of binary flags, will be returned as
string.  Only columns that are specifically marked as a `BLOB' will be
returned as `BLOB'.


File: manual.info,  Node: connector-net-using-character-sets,  Next: connector-net-programming-crystal,  Prev: connector-net-programming-binary-issues,  Up: connector-net-programming

22.2.5.32 Character Set Considerations for Connector/Net
........................................................

*Treating Binary Blobs As UTF8*

MySQL doesn't currently support 4-byte UTF8 sequences. This makes it
difficult to represent some multi-byte languages such as Japanese. To
try and alleviate this, Connector/Net now supports a mode where binary
blobs can be treated as strings.

To do this, you set the `'Treat Blobs As UTF8'' connection string
keyword to `yes'. This is all that needs to be done to enable
conversion of all binary blobs to UTF8 strings. To convert only some of
your BLOB columns, you can make use of the `'BlobAsUTF8IncludePattern''
and`'BlobAsUTF8ExcludePattern'' keywords. Set these to a regular
expression pattern that matches the column names to include or exclude
respectively.

When the regular expression patterns both match a single column, the
include pattern is applied before the exclude pattern. The result, in
this case, would be that the column would be excluded.  Also, be aware
that this mode does not apply to columns of type `BINARY' or
`VARBINARY' and also do not apply to nonbinary `BLOB' columns.

Currently, this mode only applies to reading strings out of MySQL.  To
insert 4-byte UTF8 strings into blob columns, use the .NET
`Encoding.GetBytes' function to convert your string to a series of
bytes. You can then set this byte array as a parameter for a `BLOB'
column.


File: manual.info,  Node: connector-net-programming-crystal,  Next: connector-net-programming-asp-provider,  Prev: connector-net-using-character-sets,  Up: connector-net-programming

22.2.5.33 Using Connector/Net with Crystal Reports
..................................................

* Menu:

* connector-net-programming-crystal-source::  Creating a Data Source
* connector-net-programming-crystal-creating::  Creating the Report
* connector-net-programming-crystal-displaying::  Displaying the Report

Crystal Reports is a common tool used by Windows application developers
to perform reporting and document generation. In this section we will
show how to use Crystal Reports XI with MySQL and Connector/Net.


File: manual.info,  Node: connector-net-programming-crystal-source,  Next: connector-net-programming-crystal-creating,  Prev: connector-net-programming-crystal,  Up: connector-net-programming-crystal

22.2.5.34 Creating a Data Source
................................

When creating a report in Crystal Reports there are two options for
accessing the MySQL data while designing your report.

The first option is to use Connector/ODBC as an ADO data source when
designing your report. You will be able to browse your database and
choose tables and fields using drag and drop to build your report. The
disadvantage of this approach is that additional work must be performed
within your application to produce a data set that matches the one
expected by your report.

The second option is to create a data set in VB.NET and save it as XML.
This XML file can then be used to design a report. This works quite
well when displaying the report in your application, but is less
versatile at design time because you must choose all relevant columns
when creating the data set. If you forget a column you must re-create
the data set before the column can be added to the report.

The following code can be used to create a data set from a query and
write it to disk:

* Visual Basic Example *

     Dim myData As New DataSet
     Dim conn As New MySqlConnection
     Dim cmd As New MySqlCommand
     Dim myAdapter As New MySqlDataAdapter

     conn.ConnectionString = "server=127.0.0.1;" _
         & "uid=root;" _
         & "pwd=12345;" _
         & "database=world"

     Try
         conn.Open()
         cmd.CommandText = "SELECT city.name AS cityName, city.population AS CityPopulation, " _
             & "country.name, country.population, country.continent " _
             & "FROM country, city ORDER BY country.continent, country.name"
         cmd.Connection = conn

         myAdapter.SelectCommand = cmd
         myAdapter.Fill(myData)

         myData.WriteXml("C:\dataset.xml", XmlWriteMode.WriteSchema)
     Catch ex As Exception
         MessageBox.Show(ex.Message, "Report could not be created", MessageBoxButtons.OK, MessageBoxIcon.Error)
     End Try

* C# Example *

     DataSet myData = new DataSet();
     MySql.Data.MySqlClient.MySqlConnection conn;
     MySql.Data.MySqlClient.MySqlCommand cmd;
     MySql.Data.MySqlClient.MySqlDataAdapter myAdapter;

     conn = new MySql.Data.MySqlClient.MySqlConnection();
     cmd = new MySql.Data.MySqlClient.MySqlCommand();
     myAdapter = new MySql.Data.MySqlClient.MySqlDataAdapter();

     conn.ConnectionString = "server=127.0.0.1;uid=root;" +
       "pwd=12345;database=test;";

     try
     {
       cmd.CommandText = "SELECT city.name AS cityName, city.population AS CityPopulation, " +
       "country.name, country.population, country.continent " +
       "FROM country, city ORDER BY country.continent, country.name";
       cmd.Connection = conn;

       myAdapter.SelectCommand = cmd;
       myAdapter.Fill(myData);

       myData.WriteXml(@"C:\dataset.xml", XmlWriteMode.WriteSchema);
     }
     catch (MySql.Data.MySqlClient.MySqlException ex)
     {
       MessageBox.Show(ex.Message, "Report could not be created",
       MessageBoxButtons.OK, MessageBoxIcon.Error);
     }

The resulting XML file can be used as an ADO.NET XML datasource when
designing your report.

If you choose to design your reports using Connector/ODBC, it can be
downloaded from dev.mysql.com
(http://dev.mysql.com/downloads/connector/odbc/3.51.html).


File: manual.info,  Node: connector-net-programming-crystal-creating,  Next: connector-net-programming-crystal-displaying,  Prev: connector-net-programming-crystal-source,  Up: connector-net-programming-crystal

22.2.5.35 Creating the Report
.............................

For most purposes, the Standard Report wizard helps with the initial
creation of a report. To start the wizard, open Crystal Reports and
choose the `New > Standard Report' option from the File menu.

The wizard first prompts you for a data source. If you use
Connector/ODBC as your data source, use the OLEDB provider for ODBC
option from the OLE DB (ADO) tree instead of the ODBC (RDO) tree when
choosing a data source. If using a saved data set, choose the ADO.NET
(XML) option and browse to your saved data set.

The remainder of the report creation process is done automatically by
the wizard.

After the report is created, choose the Report Options... entry of the
File menu. Un-check the Save Data With Report option.  This prevents
saved data from interfering with the loading of data within our
application.


File: manual.info,  Node: connector-net-programming-crystal-displaying,  Prev: connector-net-programming-crystal-creating,  Up: connector-net-programming-crystal

22.2.5.36 Displaying the Report
...............................

To display a report we first populate a data set with the data needed
for the report, then load the report and bind it to the data set.
Finally we pass the report to the crViewer control for display to the
user.

The following references are needed in a project that displays a report:

   * CrystalDecisions.CrystalReports.Engine

   * CrystalDecisions.ReportSource

   * CrystalDecisions.Shared

   * CrystalDecisions.Windows.Forms

The following code assumes that you created your report using a data
set saved using the code shown in *Note
connector-net-programming-crystal-source::, and have a crViewer control
on your form named `myViewer'.

* Visual Basic Example *

     Imports CrystalDecisions.CrystalReports.Engine
     Imports System.Data
     Imports MySql.Data.MySqlClient

     Dim myReport As New ReportDocument
     Dim myData As New DataSet
     Dim conn As New MySqlConnection
     Dim cmd As New MySqlCommand
     Dim myAdapter As New MySqlDataAdapter

     conn.ConnectionString = _
         "server=127.0.0.1;" _
         & "uid=root;" _
         & "pwd=12345;" _
         & "database=test"

     Try
         conn.Open()

         cmd.CommandText = "SELECT city.name AS cityName, city.population AS CityPopulation, " _
             & "country.name, country.population, country.continent " _
             & "FROM country, city ORDER BY country.continent, country.name"
         cmd.Connection = conn

         myAdapter.SelectCommand = cmd
         myAdapter.Fill(myData)

         myReport.Load(".\world_report.rpt")
         myReport.SetDataSource(myData)
         myViewer.ReportSource = myReport
     Catch ex As Exception
         MessageBox.Show(ex.Message, "Report could not be created", MessageBoxButtons.OK, MessageBoxIcon.Error)
     End Try

* C# Example *

     using CrystalDecisions.CrystalReports.Engine;
     using System.Data;
     using MySql.Data.MySqlClient;

     ReportDocument myReport = new ReportDocument();
     DataSet myData = new DataSet();
     MySql.Data.MySqlClient.MySqlConnection conn;
     MySql.Data.MySqlClient.MySqlCommand cmd;
     MySql.Data.MySqlClient.MySqlDataAdapter myAdapter;

     conn = new MySql.Data.MySqlClient.MySqlConnection();
     cmd = new MySql.Data.MySqlClient.MySqlCommand();
     myAdapter = new MySql.Data.MySqlClient.MySqlDataAdapter();

     conn.ConnectionString = "server=127.0.0.1;uid=root;" +
         "pwd=12345;database=test;";

     try
     {
         cmd.CommandText = "SELECT city.name AS cityName, city.population AS CityPopulation, " +
             "country.name, country.population, country.continent " +
             "FROM country, city ORDER BY country.continent, country.name";
         cmd.Connection = conn;

         myAdapter.SelectCommand = cmd;
         myAdapter.Fill(myData);

         myReport.Load(@".\world_report.rpt");
         myReport.SetDataSource(myData);
         myViewer.ReportSource = myReport;
     }
     catch (MySql.Data.MySqlClient.MySqlException ex)
     {
         MessageBox.Show(ex.Message, "Report could not be created",
             MessageBoxButtons.OK, MessageBoxIcon.Error);
     }

A new data set it generated using the same query used to generate the
previously saved data set. Once the data set is filled, a
ReportDocument is used to load the report file and bind it to the data
set. The ReportDocument is the passed as the ReportSource of the
crViewer.

This same approach is taken when a report is created from a single
table using Connector/ODBC. The data set replaces the table used in the
report and the report is displayed properly.

When a report is created from multiple tables using Connector/ODBC, a
data set with multiple tables must be created in our application. This
enables each table in the report data source to be replaced with a
report in the data set.

We populate a data set with multiple tables by providing multiple *Note
`SELECT': select. statements in our MySqlCommand object. These *Note
`SELECT': select.  statements are based on the SQL query shown in
Crystal Reports in the Database menu's Show SQL Query option. Assume the
following query:

     SELECT `country`.`Name`, `country`.`Continent`, `country`.`Population`, `city`.`Name`, `city`.`Population`
     FROM `world`.`country` `country` LEFT OUTER JOIN `world`.`city` `city` ON `country`.`Code`=`city`.`CountryCode`
     ORDER BY `country`.`Continent`, `country`.`Name`, `city`.`Name`

This query is converted to two *Note `SELECT': select. queries and
displayed with the following code:

* Visual Basic Example *

     Imports CrystalDecisions.CrystalReports.Engine
     Imports System.Data
     Imports MySql.Data.MySqlClient

     Dim myReport As New ReportDocument
     Dim myData As New DataSet
     Dim conn As New MySqlConnection
     Dim cmd As New MySqlCommand
     Dim myAdapter As New MySqlDataAdapter

     conn.ConnectionString = "server=127.0.0.1;" _
         & "uid=root;" _
         & "pwd=12345;" _
         & "database=world"

     Try
         conn.Open()
         cmd.CommandText = "SELECT name, population, countrycode FROM city ORDER BY countrycode, name; " _
             & "SELECT name, population, code, continent FROM country ORDER BY continent, name"
         cmd.Connection = conn

         myAdapter.SelectCommand = cmd
         myAdapter.Fill(myData)

         myReport.Load(".\world_report.rpt")
         myReport.Database.Tables(0).SetDataSource(myData.Tables(0))
         myReport.Database.Tables(1).SetDataSource(myData.Tables(1))
         myViewer.ReportSource = myReport
     Catch ex As Exception
         MessageBox.Show(ex.Message, "Report could not be created", MessageBoxButtons.OK, MessageBoxIcon.Error)
     End Try

* C# Example *

     using CrystalDecisions.CrystalReports.Engine;
     using System.Data;
     using MySql.Data.MySqlClient;

     ReportDocument myReport = new ReportDocument();
     DataSet myData = new DataSet();
     MySql.Data.MySqlClient.MySqlConnection conn;
     MySql.Data.MySqlClient.MySqlCommand cmd;
     MySql.Data.MySqlClient.MySqlDataAdapter myAdapter;

     conn = new MySql.Data.MySqlClient.MySqlConnection();
     cmd = new MySql.Data.MySqlClient.MySqlCommand();
     myAdapter = new MySql.Data.MySqlClient.MySqlDataAdapter();

     conn.ConnectionString = "server=127.0.0.1;uid=root;" +
         "pwd=12345;database=test;";

     try
     {
         cmd.CommandText = "SELECT name, population, countrycode FROM city ORDER " +
             "BY countrycode, name; *Note `SELECT': select. name, population, code, continent FROM " +
             "country ORDER BY continent, name";
         cmd.Connection = conn;

         myAdapter.SelectCommand = cmd;
         myAdapter.Fill(myData);

         myReport.Load(@".\world_report.rpt");
         myReport.Database.Tables(0).SetDataSource(myData.Tables(0));
         myReport.Database.Tables(1).SetDataSource(myData.Tables(1));
         myViewer.ReportSource = myReport;
     }
     catch (MySql.Data.MySqlClient.MySqlException ex)
     {
         MessageBox.Show(ex.Message, "Report could not be created",
             MessageBoxButtons.OK, MessageBoxIcon.Error);
     }

It is important to order the *Note `SELECT': select. queries in
alphabetic order, as this is the order the report will expect its source
tables to be in. One SetDataSource statement is needed for each table
in the report.

This approach can cause performance problems because Crystal Reports
must bind the tables together on the client-side, which will be slower
than using a pre-saved data set.


File: manual.info,  Node: connector-net-programming-asp-provider,  Next: connector-net-medium-trust,  Prev: connector-net-programming-crystal,  Up: connector-net-programming

22.2.5.37 ASP.NET Provider Model
................................

MySQL Connector/Net provides support for the ASP.NET 2.0 provider
model. This model enables application developers to focus on the
business logic of their application instead of having to recreate such
boilerplate items as membership and roles support.

MySQL Connector/Net supplies the following providers:

   * Membership Provider

   * Role Provider

   * Profile Provider

   * Session State Provider (MySQL Connector/Net 6.1 and later)

The following tables show the supported providers, their default
provider and the corresponding MySQL provider.

*Membership Provider*

Default provider and corresponding MySQL provider for the Membership
provider.

Default Provider                     MySQL Provider
System.Web.Security.SqlMembershipProviderMySql.Web.Security.MySQLMembershipProvider

*Role Provider*

Default provider and corresponding MySQL provider for the Role provider.

Default Provider                     MySQL Provider
System.Web.Security.SqlRoleProvider  MySql.Web.Security.MySQLRoleProvider

*Profile Provider*

Default provider and corresponding MySQL provider for the Profile
provider.

Default Provider                     MySQL Provider
System.Web.Profile.SqlProfileProviderMySql.Web.Profile.MySQLProfileProvider

*SessionState Provider*

Default provider and corresponding MySQL provider for the SessionState
provider.

Default Provider                     MySQL Provider
System.Web.SessionState.InProcSessionStateStoreMySql.Web.SessionState.MySqlSessionStateStore

*Note*:

The MySQL Session State provider uses slightly different capitalization
on the class name compared to the other MySQL providers.

*Installing The Providers*

The installation of Connector/Net 5.1 or later will install the
providers and register them in your machine's .NET configuration file,
`machine.config'. The additional entries created will result in the
`system.web' section appearing similar to the following code:

     <system.web>
       <processModel autoConfig="true" />
       <httpHandlers />
       <membership>
         <providers>
           <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" />
           <add name="MySQLMembershipProvider" type="MySql.Web.Security.MySQLMembershipProvider, MySql.Web, Version=6.1.1.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="LocalMySqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Clear" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" />
         </providers>
       </membership>
       <profile>
         <providers>
           <add name="AspNetSqlProfileProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
           <add name="MySQLProfileProvider" type="MySql.Web.Profile.MySQLProfileProvider, MySql.Web, Version=6.1.1.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="LocalMySqlServer" applicationName="/" />
         </providers>
       </profile>
       <roleManager>
         <providers>
           <add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
           <add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
           <add name="MySQLRoleProvider" type="MySql.Web.Security.MySQLRoleProvider, MySql.Web, Version=6.1.1.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="LocalMySqlServer" applicationName="/" />
         </providers>
       </roleManager>
     </system.web>

Each provider type can have multiple provider implementations. The
default provider can also be set here using the `defaultProvider'
attribute, but usually this is set in the `web.config' file either
manually or by using the ASP.NET configuration tool.

At time of writing, the `MySqlSessionStateStore' is not added to
`machine.config' at install time, and so add the following:

     <sessionState>
       <providers>
         <add name="MySqlSessionStateStore" type="MySql.Web.SessionState.MySqlSessionStateStore, MySql.Web, Version=6.1.1.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="LocalMySqlServer" applicationName="/" />
       </providers>
     </sessionState>

The SessionState Provider uses the `customProvider' attribute, rather
than `defaultProvider', to set the provider as the default. A typical
`web.config' file might contain:

        <system.web>
             <membership defaultProvider="MySQLMembershipProvider" />
             <roleManager defaultProvider="MySQLRoleProvider" />
             <profile defaultProvider="MySQLProfileProvider" />
             <sessionState customProvider="MySqlSessionStateStore" />
             <compilation debug="false">
               ...

This sets the MySQL Providers as the defaults to be used in this web
application.

The providers are implemented in the file `mysql.web.dll' and this file
can be found in your MySQL Connector/Net installation folder. There is
no need to run any type of SQL script to set up the database schema, as
the providers create and maintain the proper schema automatically.

* Using The Providers*

The easiest way to start using the providers is to use the ASP.NET
configuration tool that is available on the Solution Explorer toolbar
when you have a website project loaded.

In the web pages that open, you can select the MySQL membership and
roles providers by picking a custom provider for each area.

When the provider is installed, it creates a dummy connection string
named `LocalMySqlServer'. Although this has to be done so that the
provider will work in the ASP.NET configuration tool, you override this
connection string in your `web.config' file. You do this by first
removing the dummy connection string and then adding in the proper one,
as shown in the following example:

     <connectionStrings>
       <remove name="LocalMySqlServer"/>
       <add name="LocalMySqlServer" connectionString="server=xxx;uid=xxx;pwd=xxx;database=xxx;"/>
     </connectionStrings>

Note the database to connect to must be specified.

Rather than manually editing configuration files, consider using the
MySQL Website Configuration tool to configure your desired provider
setup. From MySQL Connector/Net 6.1.1 onwards, all providers can be
selected and configured from this wizard. The tool modifies your
`website.config' file to the desired configuration. A tutorial on doing
this is available in the following section *Note
connector-net-website-config::.

A tutorial demonstrating how to use the Membership and Role Providers
can be found in the following section *Note
connector-net-tutorials-asp-roles::.

* Deployment*

To use the providers on a production server, distribute the
`MySql.Data' and the `MySql.Web' assemblies, and either register them
in the remote systems Global Assembly Cache or keep them in your
application's `bin/' directory.


File: manual.info,  Node: connector-net-medium-trust,  Prev: connector-net-programming-asp-provider,  Up: connector-net-programming

22.2.5.38 Working with Partial Trust / Medium Trust
...................................................

* Menu:

* connector-net-medium-trust-evolution::  Evolution of Partial Trust Support Across Connector/Net Versions
* connector-net-medium-trust-gac::  Configuring Partial Trust with Connector/Net Library Installed in GAC
* connector-net-medium-trust-nongac::  Configuring Partial Trust with Connector/Net Library Not Installed in GAC

.NET applications operate under a given trust level. Normal desktop
applications operate under full trust, while web applications that are
hosted in shared environments are normally run under the partial trust
level (also known as `medium trust'). Some hosting providers host
shared applications in their own app pools and allow the application to
run under full trust, but this configuration is relatively rare. The
Connector/Net support for partial trust has improved over time to
simplify the configuration and deployment process for hosting providers.


File: manual.info,  Node: connector-net-medium-trust-evolution,  Next: connector-net-medium-trust-gac,  Prev: connector-net-medium-trust,  Up: connector-net-medium-trust

22.2.5.39 Evolution of Partial Trust Support Across Connector/Net Versions
..........................................................................

The partial trust support for Connector/Net has improved rapidly
throughout the 6.5.x and 6.6.x versions. The latest enhancements do
require some configuration changes in existing deployments.  Here is a
summary of the changes for each version.

* 6.6.4 and Above: Library Can Be Inside or Outside GAC *

Now you can install the `MySql.Data.dll' library in the Global Assembly
Cache (GAC) as explained in *Note connector-net-medium-trust-gac::, or
in a `bin' or `lib' folder inside the project or solution as explained
in *Note connector-net-medium-trust-nongac::. If the library is not in
the GAC, the only protocol supported is TCP/IP.

* 6.5.1 and Above: Partial Trust Requires Library in the GAC *

Connector/Net 6.5 fully enables our provider to run in a partial trust
environment when the library is installed in the Global Assembly Cache
(GAC). The new `MySqlClientPermission' class, derived from the .NET
`DBDataPermission' class, helps to simplify the permission setup.

* 5.0.8 / 5.1.3 and Above: Partial Trust Requires Socket Permissions *

Starting with these versions, Connector/Net can be used under partial
trust hosting that has been modified to allow the use of sockets for
communication. By default, partial trust does not include
`SocketPermission'. Connector/Net uses sockets to talk with the MySQL
server, so the hosting provider must create a new trust level that is
an exact clone of partial trust but that has the following permissions
added:

   * `System.Net.SocketPermission'

   * `System.Security.Permissions.ReflectionPermission'

   * `System.Net.DnsPermission'

   * `System.Security.Permissions.SecurityPermission'

* Prior to 5.0.8 / 5.1.3: Partial Trust Not Supported *

Connector/Net versions prior to 5.0.8 and 5.1.3 were not compatible
with partial trust hosting.


File: manual.info,  Node: connector-net-medium-trust-gac,  Next: connector-net-medium-trust-nongac,  Prev: connector-net-medium-trust-evolution,  Up: connector-net-medium-trust

22.2.5.40 Configuring Partial Trust with Connector/Net Library Installed in GAC
...............................................................................

If the library is installed in the GAC, you must include the connection
option `includesecurityasserts=true' in your connection string. This is
a new requirement as of Connector/Net 6.6.4.

The following list shows steps and code fragments needed to run a
Connector/Net application in a partial trust environment. For
illustration purposes, we use the Pipe Connections protocol in this
example.

  1. Install Connector/Net: version 6.6.1 or higher, or 6.5.4 or higher.

  2. After installing the library, make the following configuration
     changes:

     In the `SecurityClasses' section, add a definition for the
     `MySqlClientPermission' class, including the version to use.


          <configuration>
            <mscorlib>
              <security>
                <policy>
                  <PolicyLevel version="1">
                    <SecurityClasses>
                      ....
                      <SecurityClass Name="MySqlClientPermission" Description="MySql.Data.MySqlClient.MySqlClientPermission, MySql.Data, Version=6.6.4.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" />

     Scroll down to the `ASP.Net' section:


          <PermissionSet  class="NamedPermissionSet"  version="1"  Name="ASP.Net">

     Add a new entry for the detailed configuration of the
     `MySqlClientPermission' class:


          <IPermission class="MySqlClientPermission" version="1" Unrestricted="true"/>

     Note: This configuration is the most generalized way that includes
     all keywords.

  3. Configure the MySQL server to accept pipe connections, by adding
     the `--enable-named-pipe' option on the command line. If you need
     more information about this, see *Note windows-installation::.

  4. Confirm that the hosting provider has installed the Connector/Net
     library (`MySql.Data.dll') in the GAC.

  5. Optionally, the hosting provider can avoid granting permissions
     globally by using the new `MySqlClientPermission' class in the
     trust policies. (The alternative is to globally enable the
     permissions `System.Net.SocketPermission',
     `System.Security.Permissions.ReflectionPermission',
     `System.Net.DnsPermission', and
     `System.Security.Permissions.SecurityPermission'.)

  6. Create a simple web application using Visual Studio 2010.

  7. Add the reference in your application for the
     `MySql.Data.MySqlClient' library.

  8. Edit your `web.config' file so that your application runs using a
     Medium trust level:


          <system.web>
            <trust level="Medium"/>
          </system.web>

  9. Add the `MySql.Data.MySqlClient' namespace to your server-code
     page.

 10. Define the connection string, in slightly different ways depending
     on the Connector/Net version.

     *Only for 6.6.4 or later:* To use the connections inside any web
     application that will run in Medium trust, add the new
     `includesecurityasserts' option to the connection string.
     `includesecurityasserts=true' that makes the library request the
     following permissions when required: `SocketPermissions',
     `ReflectionPermissions', `DnsPermissions', `SecurityPermissions'
     among others that are not granted in Medium trust levels.

     *For Connector/Net 6.6.3 or earlier:* No special setting for
     security is needed within the connection string.

          MySqlConnectionStringBuilder myconnString = new MySqlConnectionStringBuilder("server=localhost;User Id=root;database=test;");
          myconnString.PipeName = "MySQL55";
          myconnString.ConnectionProtocol = MySqlConnectionProtocol.Pipe;
          // Following attribute is a new requirement when the library is in the GAC.
          // Could also be done by adding includesecurityasserts=true; to the string literal
          // in the constructor above.
          // Not needed with Connector/Net 6.6.3 and earlier.*myconnString.IncludeSecurityAsserts = true;*

 11. Define the `MySqlConnection' to use:

          MySqlConnection myconn = new MySqlConnection(myconnString.ConnectionString);
          myconn.Open();

 12. Retrieve some data from your tables:

          MySqlCommand cmd = new MySqlCommand("Select * from products", myconn);
          MySqlDataAdapter da = new MySqlDataAdapter(cmd);
          DataSet1 tds = new DataSet1();
          da.Fill(tds, tds.Tables[0].TableName);
          GridView1.DataSource = tds;
          GridView1.DataBind();
          myconn.Close()

 13. Run the program. It should execute successfully, without requiring
     any special code or encountering any security problems.


File: manual.info,  Node: connector-net-medium-trust-nongac,  Prev: connector-net-medium-trust-gac,  Up: connector-net-medium-trust

22.2.5.41 Configuring Partial Trust with Connector/Net Library Not Installed in GAC
...................................................................................

When deploying a web application to a Shared Hosted environment, where
this environment is configured to run all their .NET applications under
a partial or medium trust level, you might not be able to install the
Connector/Net library in the GAC.  Instead, you put a reference to the
library in the `bin' or `lib' folder inside the project or solution. In
this case, you configure the security in a different way than when the
library is in the GAC.

Connector/Net is commonly used by applications that run in Windows
environments where the default communication for the protocol is used
via sockets or by TCP/IP. For this protocol to operate is necessary
have the required socket permissions in the web configuration file as
follows:

  1. Open the medium trust policy web configuration file, which should
     be under this folder:

          %windir%\Microsoft.NET\Framework\{VERSION}\CONFIG\web_mediumtrust.config

     Use `Framework64' in the path instead of `Framework' if you are
     using a 64-bit installation of the framework.

  2. Locate the `SecurityClasses' tag:


          <SecurityClass Name="SocketPermission"
          Description="System.Net.SocketPermission, System, Version=4.0.0.0,
          Culture=neutral, PublicKeyToken=b77a5c561934e089"/>

  3. Scroll down and look for the following `PermissionSet':


          <PermissionSet version="1" Name="ASP.Net">

  4. Add the following inside this `PermissionSet':


          <IPermission class="SocketPermission" version="1" Unrestricted="true" />

     This configuration lets you use the driver with the default
     Windows protocol TCP/IP without having any security issues.  This
     approach only supports the TCP/IP protocol, so you cannot use any
     other type of connection.

     Also, since the `MySQLClientPermissions' class is not added to the
     medium trust policy, you cannot use it. This configuration is the
     minimum required in order to work with Connector/Net without the
     GAC.


File: manual.info,  Node: connector-net-connection-options,  Next: connector-net-rt,  Prev: connector-net-programming,  Up: connector-net

22.2.6 Connector/Net Connection String Options Reference
--------------------------------------------------------

For usage information about connection strings, see *Note
connector-net-programming-connecting-connection-string::.  The first
table list options that apply generally to all server configurations.
The options related to systems using a connection pool are split into a
separate table.

* General Options *

*Connector/Net Connection String Options - General*

Name                      Default Description
`Allow Batch',            true    When true, multiple SQL statements can
`AllowBatch'                      be sent with one command execution.
                                  Note: starting with MySQL 4.1.1, batch
                                  statements should be separated by the
                                  server-defined separator character.
                                  Statements sent to earlier versions of
                                  MySQL should be separated by ';'.
`Allow User Variables',   false   Setting this to `true' indicates that
`AllowUserVariables'              the provider expects user variables in
                                  the SQL. This option was added in
                                  Connector/Net version 5.2.2.
`Allow Zero Datetime',    false   If set to `True',
`AllowZeroDateTime'               `MySqlDataReader.GetValue()' returns a
                                  `MySqlDateTime' object for date or
                                  datetime columns that have disallowed
                                  values, such as zero datetime values,
                                  and a `System.DateTime' object for
                                  valid values. If set to `False' (the
                                  default setting) it causes a
                                  `System.DateTime' object to be returned
                                  for all valid values and an exception
                                  to be thrown for disallowed values,
                                  such as zero datetime values.
`Auto Enlist',            true    If `AutoEnlist' is set to `true', which
`AutoEnlist'                      is the default, a connection opened
                                  using `TransactionScope' participates
                                  in this scope, it commits when the
                                  scope commits and rolls back if
                                  `TransactionScope' does not commit.
                                  However, this feature is considered
                                  security sensitive and therefore cannot
                                  be used in a medium trust environment.
`BlobAsUTF8ExcludePattern'null    A POSIX-style regular expression that
                                  matches the names of BLOB columns that
                                  do not contain UTF-8 character data. See
                                  *Note
                                  connector-net-using-character-sets:: for
                                  usage details.
`BlobAsUTF8IncludePattern'null    A POSIX-style regular expression that
                                  matches the names of BLOB columns
                                  containing UTF-8 character data. See
                                  *Note
                                  connector-net-using-character-sets:: for
                                  usage details.
`Certificate File',       null    This option specifies the path to a
`CertificateFile'                 certificate file in PKCS #12 format
                                  (`.pfx'). For an example of usage, see
                                  *Note connector-net-tutorials-ssl::. Was
                                  introduced with 6.2.1.
`Certificate Password',   null    Specifies a password that is used in
`CertificatePassword'             conjunction with a certificate
                                  specified using the option
                                  `CertificateFile'. For an example of
                                  usage, see *Note
                                  connector-net-tutorials-ssl::. Was
                                  introduced with 6.2.1.
`Certificate Store        null    Enables you to access a certificate
Location',                        held in a personal store, rather than
`CertificateStoreLocation'        use a certificate file and password
                                  combination. For an example of usage,
                                  see *Note
                                  connector-net-tutorials-ssl::. Was
                                  introduced with 6.2.1.
`Certificate Thumbprint', null    Specifies a certificate thumbprint to
`CertificateThumbprint'           ensure correct identification of a
                                  certificate contained within a personal
                                  store. For an example of usage, see
                                  *Note connector-net-tutorials-ssl::. Was
                                  introduced with 6.2.1.
`CharSet', `Character             Specifies the character set that should
Set', `CharacterSet'              be used to encode all queries sent to
                                  the server. Resultsets are still
                                  returned in the character set of the
                                  result data.
`Check Parameters',       true    Indicates if stored routine parameters
`CheckParameters'                 should be checked against the server.
`Command Interceptors',           The list of interceptors that can
`CommandInterceptors'             intercept SQL command operations.
`Connect Timeout',        15      The length of time (in seconds) to wait
`Connection Timeout',             for a connection to the server before
`ConnectionTimeout'               terminating the attempt and generating
                                  an error.
`Connect_Attrs'                   Passes a predefined set of key/value
                                  pairs containing connection-specific
                                  data items to the server, for
                                  application-defined purposes.
                                  connector/Net automatically transmits
                                  the following attributes: `_pid',
                                  `_client_version', `_platform',
                                  `_program_name', `_os', `_os_details',
                                  and `_thread'. See Performance Schema
                                  Connection Attribute Tables
                                  (http://dev.mysql.com/doc/refman/5.6/en/performance-schema-connection-attribute-tables.html)
                                  for the Performance Schema tables to
                                  query on the server side to make use of
                                  these attributes.
`Convert Zero Datetime',  false   True to have
`ConvertZeroDateTime'             `MySqlDataReader.GetValue()' and
                                  `MySqlDataReader.GetDateTime()' return
                                  `DateTime.MinValue' for date or datetime
                                  columns that have disallowed values.
`Default Command          30      Sets the default value of the command
Timeout',                         timeout to be used. This does not
`DefaultCommandTimeout'           supersede the individual command
                                  timeout property on an individual
                                  command object. If you set the command
                                  timeout property, that will be used.
                                  This option was added in Connector/Net
                                  5.1.4
`Default Table Cache      60      Specifies how long a `TableDirect'
Age',                             result should be cached, in seconds.
`DefaultTableCacheAge'            For usage information about table
                                  caching, see *Note
                                  connector-net-programming-tablecaching::.
                                  This option was added in Connector/Net
                                  6.4.
`enableSessionExpireCallback'false   When set to `true', causes the
                                  session-expiry scanner to raise the
                                  `session_end' event before deleting the
                                  session data stored in the
                                  `my_aspnet_sessions' table, when a
                                  session times out. Enable this option
                                  to write additional
                                  application-specific cleanup code to
                                  handle the `session_end' event of the
                                  `global.asax' class, before the stored
                                  data of the session gets deleted.
                                  Within the session_end method, any
                                  other required cleanup can be done.
                                  This option was added in Connector/Net
                                  6.4.5; it is not yet available in
                                  Connector/Net 6.5.x releases.
`Encrypt', `UseSSL'       false   For Connector/Net 5.0.3 and later, when
                                  `true', SSL encryption is used for all
                                  data sent between the client and server
                                  if the server has a certificate
                                  installed. Recognized values are `true',
                                  `false', `yes', and `no'. In versions
                                  before 5.0.3, this option had no
                                  effect. From version 6.2.1, this option
                                  is deprecated and is replaced by `SSL
                                  Mode'. The option still works if used.
                                  If this option is set to true, it is
                                  equivalent to `SSL Mode = Preferred'.
`Exception Interceptors',         The list of interceptors that can
`ExceptionInterceptors'           triage thrown `MySqlException'
                                  exceptions.
`Functions Return         false   Causes the connector to return
String',                          binary/varbinary values as strings, if
`FunctionsReturnString'           they do not have a tablename in the
                                  metadata.
`Host', `Server', `Data   localhostThe name or network address of the
Source', `DataSource',            instance of MySQL to which to connect.
`Address', `Addr',                Multiple hosts can be specified
`Network Address'                 separated by commas. This can be useful
                                  where multiple MySQL servers are
                                  configured for replication and you are
                                  not concerned about the precise server
                                  you are connecting to. No attempt is
                                  made by the provider to synchronize
                                  writes to the database, so take care
                                  when using this option. In Unix
                                  environment with Mono, this can be a
                                  fully qualified path to a MySQL socket
                                  file. With this configuration, the Unix
                                  socket is used instead of the TCP/IP
                                  socket. Currently, only a single socket
                                  name can be given, so accessing MySQL
                                  in a replicated environment using Unix
                                  sockets is not currently supported.
`Ignore Prepare',         true    When true, instructs the provider to
`IgnorePrepare'                   ignore any calls to
                                  `MySqlCommand.Prepare()'. This option is
                                  provided to prevent issues with
                                  corruption of the statements when used
                                  with server-side prepared statements.
                                  If you use server-side prepare
                                  statements, set this option to false.
                                  This option was added in Connector/Net
                                  5.0.3 and Connector/Net 1.0.9.
`includesecurityasserts', false   Must be set to `true' when using the
`include security                 `MySQLClientPermissions' class in a
asserts'                          partial trust environment, with the
                                  library installed in the GAC of the
                                  hosting environment. This requirement
                                  is new for partial-trust applications
                                  in Connector/Net 6.6.4 and higher. See
                                  *Note connector-net-medium-trust:: for
                                  details.
`Initial Catalog',        mysql   The case-sensitive name of the database
`Database'                        to use initially.
`Interactive',            false   If set to true, the client is
`Interactive Session',            interactive. An interactive client is
`InteractiveSession'              one where the server variable
                                  `CLIENT_INTERACTIVE' is set. If an
                                  interactive client is set, the
                                  `wait_timeout' variable is set to the
                                  value of `interactive_timeout'. The
                                  client will then time out after this
                                  period of inactivity. For more details,
                                  see *Note server-system-variables:: in
                                  the MySQL Reference Manual.
`Integrated Security',    no      Use Windows authentication when
`IntegratedSecurity'              connecting to server. By default, it is
                                  turned off. To enable, specify a value
                                  of `yes'. (You can also use the value
                                  `sspi' as an alternative to `yes'.) For
                                  details, see *Note
                                  connector-net-programming-authentication-windows-native::.
                                  This option was introduced in
                                  Connector/Net 6.4.4.
`Keep Alive', `Keepalive' 0       For TCP connections, idle connection
                                  time measured in seconds, before the
                                  first keepalive packet is sent. A value
                                  of 0 indicates that keepalive is not
                                  used.
`Logging'                 false   When true, various pieces of
                                  information is output to any configured
                                  TraceListeners. See *Note
                                  connector-net-programming-tracing:: for
                                  further details.
`Old Guids', `OldGuids'   false   This option was introduced in
                                  Connector/Net 6.1.1. The backend
                                  representation of a GUID type was
                                  changed from `BINARY(16)' to
                                  `CHAR(36)'. This was done to allow
                                  developers to use the server function
                                  `UUID()' to populate a GUID table -
                                  `UUID()' generates a 36-character
                                  string. Developers of older
                                  applications can add `'Old Guids=true''
                                  to the connection string to use a GUID
                                  of data type *Note `BINARY(16)':
                                  binary-varbinary.
`Old Syntax',             false   This option was deprecated in
`OldSyntax', `Use Old             Connector/Net 5.2.2. All code should now
Syntax', `UseOldSyntax'           be written using the '@' symbol as the
                                  parameter marker.
`Password', `pwd'                 The password for the MySQL account
                                  being used.
`Persist Security Info',  false   When set to `false' or `no' (strongly
`PersistSecurityInfo'             recommended), security-sensitive
                                  information, such as the password, is
                                  not returned as part of the connection
                                  if the connection is open or has ever
                                  been in an open state.  Resetting the
                                  connection string resets all connection
                                  string values, including the password.
                                  Recognized values are `true', `false',
                                  `yes', and `no'.
`Pipe Name', `Pipe',      mysql   When set to the name of a named pipe,
`PipeName'                        the `MySqlConnection' attempts to
                                  connect to MySQL on that named pipe.
                                  This setting only applies to the
                                  Windows platform.
`Port'                    3306    The port MySQL is using to listen for
                                  connections. This value is ignored if
                                  Unix socket is used.
`Procedure Cache Size',   25      Sets the size of the stored procedure
`ProcedureCacheSize',             cache. By default, Connector/Net stores
`procedure cache',                the metadata (input/output data types)
`procedurecache'                  about the last 25 stored procedures
                                  used. To disable the stored procedure
                                  cache, set the value to zero (0). This
                                  option was added in Connector/Net 5.0.2
                                  and Connector/Net 1.0.9.
`Protocol', `Connection   socket  Specifies the type of connection to
Protocol',                        make to the server. Values can be:
`ConnectionProtocol'              `socket' or `tcp' for a socket
                                  connection, `pipe' for a named pipe
                                  connection, `unix' for a Unix socket
                                  connection, `memory' to use MySQL shared
                                  memory.
`Replication'             false   Indicates if this connection is to use
                                  replicated servers.
`Respect Binary Flags',   true    Setting this option to `false' means
`RespectBinaryFlags'              that Connector/Net ignores a column's
                                  binary flags as set by the server. This
                                  option was added in Connector/Net
                                  version 5.1.3.
`Shared Memory Name',     MYSQL   The name of the shared memory object to
`SharedMemoryName'                use for communication if the connection
                                  protocol is set to `memory'.
`Sql Server Mode',        false   Allow SQL Server syntax. When set to
`sqlservermode'                   `true', enables Connector/Net to
                                  support square brackets around symbols
                                  instead of backticks. This enables
                                  Visual Studio wizards that bracket
                                  symbols with [] to work with
                                  Connector/Net.  This option incurs a
                                  performance hit, so should only be used
                                  if necessary. This option was added in
                                  version 6.3.1.
`SSL Mode', `SslMode'     None    This option has the following values:
                                  
                                     * *None* - do not use SSL.
                                  
                                     * *Preferred* - use SSL if the
                                       server supports it, but allow
                                       connection in all cases.
                                  
                                     * *Required* - Always use SSL. Deny
                                       connection if server does not
                                       support SSL.
                                  
                                     * *VerifyCA* - Always use SSL.
                                       Validate the CA but tolerate name
                                       mismatch.
                                  
                                     * *VerifyFull* - Always use SSL.
                                       Fail if the host name is not
                                       correct.
                                  This option was introduced in MySQL
                                  Connector/Net 6.2.1.
`Table Cache',            false   Enables or disables caching of
`tablecache',                     `TableDirect' commands.  A value of
`tablecaching'                    `true' enables the cache while `false'
                                  disables it. For usage information
                                  about table caching, see *Note
                                  connector-net-programming-tablecaching::.
                                  This option was added in Connector/Net
                                  6.4.
`Treat BLOBs as UTF8',    false   
`TreatBlobsAsUTF8'                
`Treat Tiny As Boolean',  true    Setting this value to `false' causes
`TreatTinyAsBoolean'              `TINYINT(1)' to be treated as an *Note
                                  `INT': integer-types. See *Note
                                  numeric-type-overview:: for a further
                                  explanation of the *Note `TINYINT':
                                  integer-types.  and *Note `BOOL':
                                  integer-types. data types.
`Use Affected Rows',      false   When `true', the connection reports
`UseAffectedRows'                 changed rows instead of found rows.
                                  This option was added in Connector/Net
                                  version 5.2.6.
`Use Procedure Bodies',   true    When set to `true', the default value,
`UseProcedureBodies',             MySQL Connector/Net expects the body of
`procedure bodies'                the procedure to be viewable. This
                                  enables it to determine the parameter
                                  types and order. Set the option to
                                  `false' when the user connecting to the
                                  database does not have the `SELECT'
                                  privileges for the `mysql.proc' (stored
                                  procedures) table, or cannot view *Note
                                  `INFORMATION_SCHEMA.ROUTINES':
                                  routines-table. In this case, MySQL
                                  Connector/Net cannot determine the
                                  types and order of the parameters, and
                                  must be alerted to this fact by setting
                                  this option to `false'. When set to
                                  `false', MySQL Connector/Net does not
                                  rely on this information being
                                  available when the procedure is called.
                                  Because MySQL Connector/Net will not be
                                  able to determine this information,
                                  explicitly set the types of all the
                                  parameters before the call and add the
                                  parameters to the command in the same
                                  order as they appear in the procedure
                                  definition. This option was added in
                                  MySQL Connector/Net 5.0.4 and MySQL
                                  Connector/Net 1.0.10.
`User Id', `UserID',              The MySQL login account being used.
`Username', `Uid', `User          
name', `User'                     
`Compress', `Use          false   Setting this option to `true' enables
Compression',                     compression of packets exchanged
`UseCompression'                  between the client and the server. This
                                  exchange is defined by the MySQL
                                  client/server protocol.
                                  
                                  Compression is used if both client and
                                  server support ZLIB compression, and
                                  the client has requested compression
                                  using this option.
                                  
                                  A compressed packet header is: packet
                                  length (3 bytes), packet number (1
                                  byte), and Uncompressed Packet Length (3
                                  bytes). The Uncompressed Packet Length
                                  is the number of bytes in the original,
                                  uncompressed packet. If this is zero,
                                  the data in this packet has not been
                                  compressed.  When the compression
                                  protocol is in use, either the client
                                  or the server may compress packets.
                                  However, compression will not occur if
                                  the compressed length is greater than
                                  the original length. Thus, some packets
                                  will contain compressed data while
                                  other packets will not.
`Use Usage Advisor',      false   Logs inefficient database operations.
`Usage Advisor',                  
`UseUsageAdvisor'                 
`Use Performance          false   Indicates that performance counters
Monitor',                         should be updated during execution.
`UsePerformanceMonitor',          
`userperfmon', `perfmon'          

* Connection Pooling Options *

The following table lists the valid names for options related to
connection pooling within the `ConnectionString'.  For more information
about connection pooling, see *Note
connector-net-programming-connection-pooling::.

*Connector/Net Connection String Options - Connection Pooling*

Name                      Default Description
`Cache Server             false   Specifies whether server variable
Properties',                      settings are updated by a `SHOW
`CacheServerProperties'           VARIABLES' command each time a pooled
                                  connection is returned. Enabling this
                                  setting speeds up connections in a
                                  connection pool environment. Your
                                  application is not informed of any
                                  changes to configuration variables made
                                  by other connections. This option was
                                  added in Connector/Net 6.3.
`Connection Lifetime',    0       When a connection is returned to the
`ConnectionLifeTime'              pool, its creation time is compared
                                  with the current time, and the
                                  connection is destroyed if that time
                                  span (in seconds) exceeds the value
                                  specified by `Connection Lifetime'.
                                  This is useful in clustered
                                  configurations to force load balancing
                                  between a running server and a server
                                  just brought online. A value of zero
                                  (0) causes pooled connections to have
                                  the maximum connection timeout.
`Connection Reset',       false   If true, the connection state is reset
`ConnectionReset'                 when it is retrieved from the pool. The
                                  default value of false avoids making an
                                  additional server round trip when
                                  obtaining a connection, but the
                                  connection state is not reset.
`Maximum Pool Size',      100     The maximum number of connections
`Max Pool Size',                  allowed in the pool.
`maximumpoolsize'                 
`Minimum Pool Size',      0       The minimum number of connections
`Min Pool Size',                  allowed in the pool.
`MinimumPoolSize'                 
`Pooling'                 true    When `true', the `MySqlConnection'
                                  object is drawn from the appropriate
                                  pool, or if necessary, is created and
                                  added to the appropriate pool.
                                  Recognized values are `true', `false',
                                  `yes', and `no'.


File: manual.info,  Node: connector-net-rt,  Next: connector-net-entityframework50,  Prev: connector-net-connection-options,  Up: connector-net

22.2.7 Connector/Net Support for Windows Store
----------------------------------------------

Starting with 6.7, Connector/Net fully supports building Windows Store
apps. Windows Store are based on .NET but use a very restrictive subset
of that functionality. The main difference is the complete lack of the
ADO.Net data subsystem. Below is a list of the differences between
Connector/Net 6.7 and Connector/Net RT 6.7.  Please note that we are
looking at ways of bringing these functionalities back in future
versions.

   * No support for MySqlDataAdapter. MySqlCommand and MySqlDataReader
     are supported.

   * Connector/Net RT does not support SSL connections or Windows
     authentication. Also, SHA256 is not currectly supported.

   * Connector/Net RT only supports TCP connections. Named pipe and
     shared memory connections are not supported.

   * Connector/Net RT doesn't support tracing.

     This version of Connector/Net is no longer supported.

   * Connector/Net RT doesn't support load balancing. Command and
     Exception interceptors are supported however.

     This version of Connector/Net is no longer supported.

   * MySqlConnection.GetSchema methods do not return DataTable types.
     Instead they return a new object called MySqlSchemaCollection.
     You can query this object for the schema information. Normal
     Connector/Net will include support for returning schema
     information in both DataTable and MySqlSchemaCollection format.

     This version of Connector/Net is no longer supported.

   * Some contructors and other apis on supported classes may have been
     removed or altered. Any API that used DataTable, DataSet, or
     DataRow has been altered or removed.

     This version of Connector/Net is no longer supported.

Using Connector/Net RT is easy. Simply create a Windows Store
application using Visual Studio and then reference the
MySql.Data.RT.dll assembly in your project. The code you write should
be exactly the same as for normal Connector/Net (including using same
namespace MySql.Data.MySqlClient) except for the differences listed
above.


File: manual.info,  Node: connector-net-entityframework50,  Next: connector-net-ref,  Prev: connector-net-rt,  Up: connector-net

22.2.8 EF 5 Support
-------------------

EF 5 Support is based on the new support for .Net Framework 4.5 which
is the default target framework in the latest version of VS (2012).
Using this framework version is a requirement in order to use any EF 5
feature.

Below is a detailed description on each one of the features.

* EF 5 Features *

Spatial Data Type (Geometry type support). Spatial data types support
is backed up by the server capabilities which are documented at: *Note
spatial-extensions:: There are different types for spatial data, and
the instantiable types that are supported at MySQL are:

Point, LineString, Polygon, GeometryCollection, MultiPoint,
MultiLineString, and MultiPolygon.

At Connector/Net these different types can be managed with the new
Geometry type. Before Connector/Net 6.7 the Geometry types didn't have
a MySql Type inside the driver. So most of the users had to use it by
using a binary type. This is not longer needed. Now all the specific
operations for any Geometry type can be done by using this new class.

An example of how to write a point data is shown here using
Connector/Net 6.7 and MySQL Server 5.6.7 or further.

         //Storing a geometry point
     	MySqlConnection conn = new MySqlConnection("server=localhost;userid=root;database=testgeo;");
         conn.Open();
     	MySqlCommand cmd = new MySqlCommand("CREATE TABLE Test (v Geometry NOT NULL)");
     	cmd.Connection = conn;
         cmd.ExecuteNonQuery();

         cmd = new MySqlCommand("INSERT INTO Test VALUES(GeomFromText(?v))", conn);
     	cmd.Parameters.Add("?v",MySqlDbType.String);
     	cmd.Parameters[0].Value = "POINT(47.37-122.21)";
     	cmd.ExecuteNonQuery();

         cmd.CommandText = "SELECT AsText(v) FROM Test";
     	using(MySqlDataReader reader = cmd.ExecuteReader())
     	{
     		reader.Read();
     		varval = reader.GetValue(0);
     		Console.WriteLine(val);
     	}
     	conn.Close();

Output

POINT(47.37, -122.21)

To read a set of rows that contains a Geometry column can be achieved
by using an appropiate MySqlDataReader. Example:

         cmd.CommandText = "SELECT v FROM Test";
     	using(MySqlDataReader reader = cmd.ExecuteReader())
     	{
     		reader.Read();
     		var val = reader.GetMySqlGeometry(0);
     		var valWithName = reader.GetMySqlGeometry("v");
     		Console.WriteLine(val.ToString());
     		// output : ("POINT(47.37 -122.21)"
     		Console.WriteLine(valWithName.ToString());
     		// output("POINT(47.37 -122.21)"
     	}

A geometry point also can contain an SRID (Spatial Reference System
Identifier)value. This value can also be stored using a geometry type:

Example:

         MySqlGeometry v = new MySqlGeometry(47.37, -122.21, 101);
     	var par =new MySqlParameter("?v", MySqlDbType.Geometry);
     	par.Value = v;

         MySqlCommand cmd = new MySqlCommand("INSERT INTO Test VALUES(?v)", conn);
     	cmd.Parameters.Add(par);
     	cmd.ExecuteNonQuery();

         cmd.CommandText = "SELECT SRID(v) FROM Test";

         using (MySqlDataReader reader = cmd.ExecuteReader())
     	{
         reader.Read(); var val = reader.GetString(0);
         Console.WriteLine(val); // output "101"
     	}

Another types of values besides point can be stored at the Geometry
type:

   * LineString

   * MultiLineString

   * Polygon

   * MultiPolygon

   * GeometryCollection

Spatial data is supported in Model, Database and Code First.

Using spatial types with an Entity Framework Model is one of the new
features of Connector/Net 6.7.

Spatial types can be used with any of the strategies used to create the
data layer of any application: Database First, Code First or Model
First. Entity Framework support two main types for spatial data:
DbGeometry and DBGeography. The second one is not supported at
Connector/Net since the MySQL server doesn't have any equivalent type
to which map this type in. So all the examples will use the DbGeometry
type.

Example of usage in Code First.

An entity that contains a Geometry column can be defined as follows:

         public class Distributor { public int DistributorId { get; set; }
         public string Name { get; set; } public DbGeometry point { get; set;
         } }

         public class DistributorsContext : DbContext { public
         DbSet<Distributor> Distributors { get; set; } }

Creating the db:

         using (DistributorsContext context = new DistributorsContext()) {
         context.Database.Delete(); context.Database.Create();
         context.Distributors.Add(new Distributor() { Name = "Graphic
         Design Institute", point =
         DbGeometry.FromText("POINT(-122.336106 47.605049)",101),
         }); context.SaveChanges();

         var result = (from u in context.Distributors select
         u.point.CoordinateSystemId).ToList();

         foreach (var item in result)
         Console.WriteLine("CoordinateSystemId " + item);

Output:

CoordinateSystemId 101

* Spatial supported Functions *

There are some useful functions that takes Geometry values:

   * SpatialDimension

   * SpatialEnvelope

   * IsSimpleGeometry

   * SpatialTypeName

   * CoordinateSystemId

   * Point

   * XCoordinate

   * YCoordinate

   * GeometryFromText

   * SpatialContains

   * AsText

   * SpatialBuffer

   * SpatialDifference

   * SpatialIntersection

* Enum types Support *

   * Enumeration types are used to define a set of named constants that
     may be assigned to a numeric value.

   * By default the underlying type of each element in the enum is int.
     But it can be specified another numeric type by using a colon.
     Example:enum Months : byte { Jan, Feb, Mar, Apr, May, Jun, Jul,
     Aug, Sep, Oct, Nov, Dec };

   * When a value is not specified in the defined list, the values are
     automatically incremented by 1. In the previous exampleMonths.Jan
     has a default value of 0.

In order to use enum types inside an Entity Framework defined class it
should follow the next steps:

In Visual Studio 2012

Using Database First approach

   * Create a new project (make sure .NET framework is target in the
     New Project dialog.),

   * Add a new Entity Model

   * Select the Existing Database option

   * Select the tables to be imported in the model

   * In order to create an Enum Type an integer column should exists
     inside of a table.

   * In the Model designer select the table to use.

   * Right click on the column of integer type and select Create enum
     type.

   * At this point all linq to entities query can use the Enum type
     directly.

Example:

         using (var db = new DistributorsEntities()) {
     		db.Database.CreateIfNotExists();
     		db.distributors.Add(new distributor { Type = DistributorType.Regional });
     		db.distributors.Add(new distributor { Type = DistributorType.Reseller });
     		db.distributors.Add(new distributor { Type = DistributorType.Zone });
     		db.SaveChanges();

     		var testQ = (from d in db.distributors select d).FirstOrDefault();
     		foreach (var item in testQ)
     			Console.WriteLine(item.Type);
     	}

Output:

Regional Reseller Zone

Other important features and improvements included in Entity Framework
are:

   * All LINQ queries are now automatically compiled and cached to
     improve query performance.

   * Multiple Diagrams for a model is supported.

   * Enhancement Table per type in SQL Generation.

   * Performance Enhancements.

   * The StoreGeneratedPattern for key columns can now be set on an
     entity Properties window and this value will propagate from the
     entity model down to the stored definition. The stored Generated
     Pattern attribute allows to control how the Entity Framework
     synchronizes database column values and entity property values;


File: manual.info,  Node: connector-net-ref,  Next: connector-net-support,  Prev: connector-net-entityframework50,  Up: connector-net

22.2.9 Connector/Net API Reference
----------------------------------

* Menu:

* connector-net-ref-mysqlclient::  `MySql.Data.MySqlClient' Namespace
* connector-net-ref-types::      `MySql.Data.Types' Namespace

This section of the manual contains a complete reference to the
Connector/Net ADO.NET component, automatically generated from the
embedded documentation.


File: manual.info,  Node: connector-net-ref-mysqlclient,  Next: connector-net-ref-types,  Prev: connector-net-ref,  Up: connector-net-ref

22.2.9.1 `MySql.Data.MySqlClient' Namespace
...........................................

* Menu:

* connector-net-ref-mysqlclienthierarchy::  `MySql.Data.MySqlClientHierarchy'
* connector-net-ref-mysqlclient-basecommandinterceptor::  `BaseCommandInterceptor'
* connector-net-ref-mysqlclient-baseexceptioninterceptor::  `BaseExceptionInterceptor'
* connector-net-ref-mysqlclient-mysqlcommand::  `MySqlCommand' Class
* connector-net-ref-mysqlclient-mysqlcommandbuilder::  `MySqlCommandBuilder' Class
* connector-net-ref-mysqlclient-mysqlexception::  `MySqlException' Class
* connector-net-ref-mysqlclient-mysqlhelper::  `MySqlHelper' Class
* connector-net-ref-mysqlclient-mysqlerrorcode::  `MySqlErrorCode' Enumeration

*Note Namespace hierarchy: connector-net-ref-mysqlclienthierarchy.

*Classes*

Classes in the MySql.Data.MySqlClient namespace.

Class                                Description
*Note BaseCommandInterceptor:        Provides a means of enhancing or
connector-net-ref-mysqlclient-basecommandinterceptor.replacing SQL commands through the
                                     connection string rather than
                                     recompiling.
*Note BaseExceptionInterceptor:      Provides a means of enabling and
connector-net-ref-mysqlclient-baseexceptioninterceptor.disabling exception handling through
                                     the connection string rather than
                                     recompiling.
MySqlClientPermission                Derived from the .NET
                                     DBDataPermission
                                     (http://msdn.microsoft.com/en-us/library/system.data.common.dbdatapermission.aspx)
                                     class. For usage information, see
                                     *Note connector-net-medium-trust::.
*Note MySqlCommand:                  
connector-net-ref-mysqlclient-mysqlcommand.
*Note MySqlCommandBuilder:           
connector-net-ref-mysqlclient-mysqlcommandbuilder.
*Note MySqlConnection:               
connector-net-ref-mysqlclient-mysqlconnection.
*Note MySqlDataAdapter:              
connector-net-ref-mysqlclient-mysqldataadapter.
*Note MySqlDataReader:               Provides a means of reading a
connector-net-ref-mysqlclient-mysqldatareader.forward-only stream of rows from a
                                     MySQL database. This class cannot
                                     be inherited.
*Note MySqlError:                    Collection of error codes that can
connector-net-ref-mysqlclient-mysqlerror.be returned by the server
*Note MySqlException:                The exception that is thrown when
connector-net-ref-mysqlclient-mysqlexception.MySQL returns an error. This class
                                     cannot be inherited.
*Note MySqlHelper:                   Helper class that makes it easier
connector-net-ref-mysqlclient-mysqlhelper.to work with the provider.
*Note MySqlInfoMessageEventArgs:     Provides data for the InfoMessage
connector-net-ref-mysqlclient-mysqlinfomessageeventargs.event. This class cannot be
                                     inherited.
*Note MySqlParameter:                Represents a parameter to a *Note
connector-net-ref-mysqlclient-mysqlparameter.MySqlCommand:
                                     connector-net-ref-mysqlclient-mysqlcommand,
                                     and optionally, its mapping to
                                     DataSetcolumns. This class cannot
                                     be inherited.
*Note MySqlParameterCollection:      Represents a collection of
connector-net-ref-mysqlclient-mysqlparametercollection.parameters relevant to a *Note
                                     MySqlCommand:
                                     connector-net-ref-mysqlclient-mysqlcommand.
                                     as well as their respective
                                     mappings to columns in a DataSet.
                                     This class cannot be inherited.
*Note MySqlRowUpdatedEventArgs:      Provides data for the RowUpdated
connector-net-ref-mysqlclient-mysqlrowupdatedeventargs.event. This class cannot be
                                     inherited.
*Note MySqlRowUpdatingEventArgs:     Provides data for the RowUpdating
connector-net-ref-mysqlclient-mysqlrowupdatingeventargs.event. This class cannot be
                                     inherited.
*Note MySqlTransaction:              
connector-net-ref-mysqlclient-mysqltransaction.

*Delegates*

Delegates in the MySql.Data.MySqlClient namespace.

Delegate                             Description
*Note MySqlInfoMessageEventHandler:  Represents the method that will
connector-net-ref-mysqlclient-mysqlinfomessageeventhandler.handle the *Note InfoMessage:
                                     connector-net-ref-mysqlclient-mysqlconnection-infomessage.
                                     event of a *Note MySqlConnection:
                                     connector-net-ref-mysqlclient-mysqlconnection.
*Note MySqlRowUpdatedEventHandler:   Represents the method that will
connector-net-ref-mysqlclient-mysqlrowupdatedeventhandler.handle the RowUpdatedevent of a
                                     *Note MySqlDataAdapter:
                                     connector-net-ref-mysqlclient-mysqldataadapter.
*Note MySqlRowUpdatingEventHandler:  Represents the method that will
connector-net-ref-mysqlclient-mysqlrowupdatingeventhandler.handle the RowUpdatingevent of a
                                     *Note MySqlDataAdapter:
                                     connector-net-ref-mysqlclient-mysqldataadapter.

*Enumerations*

Enumerations in the MySql.Data.MySqlClient namespace.

Enumeration                          Description
*Note MySqlDbType:                   Specifies MySQL-specific data type
connector-net-ref-mysqlclient-mysqldbtype.of a field, property, for use in a
                                     *Note MySqlParameter:
                                     connector-net-ref-mysqlclient-mysqlparameter.
*Note MySqlErrorCode:                
connector-net-ref-mysqlclient-mysqlerrorcode.


File: manual.info,  Node: connector-net-ref-mysqlclienthierarchy,  Next: connector-net-ref-mysqlclient-basecommandinterceptor,  Prev: connector-net-ref-mysqlclient,  Up: connector-net-ref-mysqlclient

22.2.9.2 `MySql.Data.MySqlClientHierarchy'
..........................................

*See Also*

*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-basecommandinterceptor,  Next: connector-net-ref-mysqlclient-baseexceptioninterceptor,  Prev: connector-net-ref-mysqlclienthierarchy,  Up: connector-net-ref-mysqlclient

22.2.9.3 `BaseCommandInterceptor'
.................................

The `BaseCommandInterceptor' class has these methods that you can
override:

     public virtual bool ExecuteScalar(string sql, ref object returnValue);
     public virtual bool ExecuteNonQuery(string sql, ref int returnValue);
     public virtual bool ExecuteReader(string sql, CommandBehavior behavior, ref MySqlDataReader returnValue);
     public virtual void Init(MySqlConnection connection);

If your interceptor overrides one of the `Execute...' methods, set the
`returnValue' output parameter and return `true' if you handled the
event, or `false' if you did not handle the event. The SQL command is
processed normally only when all command interceptors return `false'.

The connection passed to the `Init' method is the connection that is
attached to this interceptor.

For full usage and examples, see *Note connector-net-interceptors::.


File: manual.info,  Node: connector-net-ref-mysqlclient-baseexceptioninterceptor,  Next: connector-net-ref-mysqlclient-mysqlcommand,  Prev: connector-net-ref-mysqlclient-basecommandinterceptor,  Up: connector-net-ref-mysqlclient

22.2.9.4 `BaseExceptionInterceptor'
...................................

You develop an exception interceptor first by creating a subclass of
the `BaseExceptionInterceptor' class. You must override the
`InterceptException()' method. You can also override the `Init()'
method to do some one-time initialization.

Each exception interceptor has 2 methods:

     public abstract Exception InterceptException(Exception exception,
       MySqlConnection connection);
     public virtual void Init(MySqlConnection connection);

The connection passed to `Init()' is the connection that is attached to
this interceptor.

Each interceptor is required to override `InterceptException' and
return an exception.  It can return the exception it is given, or it
can wrap it in a new exception. We currently do not offer the ability
to suppress the exception.

For full usage and examples, see *Note connector-net-interceptors::.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommand,  Next: connector-net-ref-mysqlclient-mysqlcommandbuilder,  Prev: connector-net-ref-mysqlclient-baseexceptioninterceptor,  Up: connector-net-ref-mysqlclient

22.2.9.5 `MySqlCommand' Class
.............................

* Menu:

* connector-net-ref-mysqlclient-mysqlcommandmembers::  `MySqlCommand' Members

For a list of all members of this type, see *Note MySqlCommand Members:
connector-net-ref-mysqlclient-mysqlcommandmembers.

*Syntax: Visual Basic*

     NotInheritable Public Class MySqlCommand_
       Inherits Component_
       Implements IDbCommand, ICloneable

*Syntax: C#*

     public sealed class MySqlCommand : Component, IDbCommand, ICloneable

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySqlCommand Members:
connector-net-ref-mysqlclient-mysqlcommandmembers, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandmembers,  Prev: connector-net-ref-mysqlclient-mysqlcommand,  Up: connector-net-ref-mysqlclient-mysqlcommand

22.2.9.6 `MySqlCommand' Members
...............................

* Menu:

* connector-net-ref-mysqlclient-mysqlcommandconstructor::  `MySqlCommand' Constructor
* connector-net-ref-mysqlclient-mysqlcommand-commandtext::  CommandText Property
* connector-net-ref-mysqlclient-mysqlcommand-commandtimeout::  CommandTimeout Property
* connector-net-ref-mysqlclient-mysqlcommand-commandtype::  CommandType Property
* connector-net-ref-mysqlclient-mysqlcommand-connection::  Connection Property
* connector-net-ref-mysqlclient-mysqlcommand-isprepared::  IsPrepared Property
* connector-net-ref-mysqlclient-mysqlcommand-parameters::  Parameters Property
* connector-net-ref-mysqlclient-mysqlcommand-transaction::  Transaction Property
* connector-net-ref-mysqlclient-mysqlcommand-updatedrowsource::  UpdatedRowSource Property
* connector-net-ref-mysqlclient-mysqlcommand-cancel::  `MySqlCommand.Cancel' Method
* connector-net-ref-mysqlclient-mysqlcommand-createparameter::  `MySqlCommand.CreateParameter' Method
* connector-net-ref-mysqlclient-mysqlcommand-executenonquery::  `MySqlCommand.ExecuteNonQuery' Method
* connector-net-ref-mysqlclient-mysqlcommand-executereader-overloads::  ExecuteReader Method
* connector-net-ref-mysqlclient-mysqlcommand-executescalar::  `MySqlCommand.ExecuteScalar' Method
* connector-net-ref-mysqlclient-mysqlcommand-prepare::  `MySqlCommand.Prepare' Method

*Note MySqlCommand overview: connector-net-ref-mysqlclient-mysqlcommand.

*Public Instance Constructors*

Public instance constructors in the MySql.Data.MySqlClient namespace.

*Note MySqlCommand:                  Overloaded. Initializes a new
connector-net-ref-mysqlclient-mysqlcommandconstructor.instance of the MySqlCommand class.

*Public Instance Properties*

Public instance properties in the MySql.Data.MySqlClient namespace.

*Note CommandText:                   
connector-net-ref-mysqlclient-mysqlcommand-commandtext.
*Note CommandTimeout:                
connector-net-ref-mysqlclient-mysqlcommand-commandtimeout.
*Note CommandType:                   
connector-net-ref-mysqlclient-mysqlcommand-commandtype.
*Note Connection:                    
connector-net-ref-mysqlclient-mysqlcommand-connection.
Container (inherited from Component) Gets the IContainer that contains
                                     the Component.
*Note IsPrepared:                    
connector-net-ref-mysqlclient-mysqlcommand-isprepared.
*Note Parameters:                    
connector-net-ref-mysqlclient-mysqlcommand-parameters.
Site (inherited from Component)      Gets or sets the ISite of the
                                     Component.
*Note Transaction:                   
connector-net-ref-mysqlclient-mysqlcommand-transaction.
*Note UpdatedRowSource:              
connector-net-ref-mysqlclient-mysqlcommand-updatedrowsource.

*Public Instance Methods*

Public instance methods in the MySql.Data.MySqlClient namespace.

*Note Cancel:                        Attempts to cancel the execution of
connector-net-ref-mysqlclient-mysqlcommand-cancel.a MySqlCommand. This operation is
                                     not supported.
CreateObjRef (inherited from         Creates an object that contains all
MarshalByRefObject)                  the relevant information required to
                                     generate a proxy used to
                                     communicate with a remote object.
*Note CreateParameter:               Creates a new instance of a *Note
connector-net-ref-mysqlclient-mysqlcommand-createparameter.MySqlParameter:
                                     connector-net-ref-mysqlclient-mysqlparameter.
                                     object.
Dispose (inherited from Component)   Releases all resources used by the
                                     Component.
Equals (inherited from Object)       Determines whether the specified
                                     Object is equal to the current
                                     Object.
*Note ExecuteNonQuery:               
connector-net-ref-mysqlclient-mysqlcommand-executenonquery.
*Note ExecuteReader:                 Overloaded.
connector-net-ref-mysqlclient-mysqlcommand-executereader-overloads.
*Note ExecuteScalar:                 
connector-net-ref-mysqlclient-mysqlcommand-executescalar.
GetHashCode (inherited from Object)  Serves as a hash function for a
                                     particular type. GetHashCode is
                                     suitable for use in hashing
                                     algorithms and data structures like
                                     a hash table.
GetLifetimeService (inherited from   Retrieves the current lifetime
MarshalByRefObject)                  service object that controls the
                                     lifetime policy for this instance.
GetType (inherited from Object)      Gets the Type of the current
                                     instance.
InitializeLifetimeService            Obtains a lifetime service object
(inherited from MarshalByRefObject)  to control the lifetime policy for
                                     this instance.
*Note Prepare:                       
connector-net-ref-mysqlclient-mysqlcommand-prepare.
ToString (inherited from Component)  Returns a String containing the
                                     name of the Component, if any. This
                                     method should not be overridden.

*Public Instance Events*

Public instance events in the MySql.Data.MySqlClient namespace.

Disposed (inherited from Component)  Adds an event handler to listen to
                                     the Disposed event on the component.

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandconstructor,  Next: connector-net-ref-mysqlclient-mysqlcommand-commandtext,  Prev: connector-net-ref-mysqlclient-mysqlcommandmembers,  Up: connector-net-ref-mysqlclient-mysqlcommandmembers

22.2.9.7 `MySqlCommand' Constructor
...................................

* Menu:

* connector-net-ref-mysqlclient-mysqlcommandconstructor1::  `MySqlCommand' Constructor ()
* connector-net-ref-mysqlclient-mysqlcommandconstructor2::  `MySqlCommand' Constructor (String)
* connector-net-ref-mysqlclient-mysqlcommandconstructor3::  `MySqlCommand' Constructor
* connector-net-ref-mysqlclient-mysqlcommandconstructor4::  `MySqlCommand' Constructor

Initializes a new instance of the *Note MySqlCommand:
connector-net-ref-mysqlclient-mysqlcommand.  class.

*Overload List*

Initializes a new instance of the *Note MySqlCommand:
connector-net-ref-mysqlclient-mysqlcommand.  class.

   * *Note public MySqlCommand();:
     connector-net-ref-mysqlclient-mysqlcommandconstructor1.

   * *Note public MySqlCommand(string);:
     connector-net-ref-mysqlclient-mysqlcommandconstructor2.

   * *Note public MySqlCommand(string:
     (MySqlConnection);)connector-net-ref-mysqlclient-mysqlcommandconstructor3.

   * *Note public MySqlCommand(string:
     (MySqlConnection)connector-net-ref-mysqlclient-mysqlcommandconstructor4.

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandconstructor1,  Next: connector-net-ref-mysqlclient-mysqlcommandconstructor2,  Prev: connector-net-ref-mysqlclient-mysqlcommandconstructor,  Up: connector-net-ref-mysqlclient-mysqlcommandconstructor

22.2.9.8 `MySqlCommand' Constructor ()
......................................

Initializes a new instance of the *Note MySqlCommand:
connector-net-ref-mysqlclient-mysqlcommand.  class.

*Syntax: Visual Basic*

     Overloads Public Sub New()

*Syntax: C#*

     public MySqlCommand();

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient,
*Note MySqlCommand Constructor Overload List:
connector-net-ref-mysqlclient-mysqlcommandconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandconstructor2,  Next: connector-net-ref-mysqlclient-mysqlcommandconstructor3,  Prev: connector-net-ref-mysqlclient-mysqlcommandconstructor1,  Up: connector-net-ref-mysqlclient-mysqlcommandconstructor

22.2.9.9 `MySqlCommand' Constructor (String)
............................................

*Syntax: Visual Basic*

     Overloads Public Sub New( _
        ByVal cmdText As String _
     )

*Syntax: C#*

     public MySqlCommand(
     stringcmdText
     );

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient,
*Note MySqlCommand Constructor Overload List:
connector-net-ref-mysqlclient-mysqlcommandconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandconstructor3,  Next: connector-net-ref-mysqlclient-mysqlcommandconstructor4,  Prev: connector-net-ref-mysqlclient-mysqlcommandconstructor2,  Up: connector-net-ref-mysqlclient-mysqlcommandconstructor

22.2.9.10 `MySqlCommand' Constructor
....................................

* Menu:

* connector-net-ref-mysqlclient-mysqlconnection::  `MySqlConnection' Class

*Syntax: Visual Basic*

     Overloads Public Sub New( _
        ByVal cmdText As String, _
        ByVal connection As MySqlConnection _
     )

*Syntax: C#*

     public MySqlCommand(
     stringcmdText,
     MySqlConnectionconnection
     );

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient,
*Note MySqlCommand Constructor Overload List:
connector-net-ref-mysqlclient-mysqlcommandconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection,  Prev: connector-net-ref-mysqlclient-mysqlcommandconstructor3,  Up: connector-net-ref-mysqlclient-mysqlcommandconstructor3

22.2.9.11 `MySqlConnection' Class
.................................

* Menu:

* connector-net-ref-mysqlclient-mysqlconnectionmembers::  `MySqlConnection' Members

For a list of all members of this type, see *Note MySqlConnection
Members: connector-net-ref-mysqlclient-mysqlconnectionmembers .

*Syntax: Visual Basic*

     NotInheritable Public Class MySqlConnection_
       Inherits Component_
       Implements IDbConnection, ICloneable

*Syntax: C#*

     public sealed class MySqlConnection : Component, IDbConnection, ICloneable

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySqlConnection Members:
connector-net-ref-mysqlclient-mysqlconnectionmembers, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnectionmembers,  Prev: connector-net-ref-mysqlclient-mysqlconnection,  Up: connector-net-ref-mysqlclient-mysqlconnection

22.2.9.12 `MySqlConnection' Members
...................................

* Menu:

* connector-net-ref-mysqlclient-mysqlconnectionconstructor::  `MySqlConnection' Constructor
* connector-net-ref-mysqlclient-mysqlconnection-connectionstring::  ConnectionString Property
* connector-net-ref-mysqlclient-mysqlconnection-connectiontimeout::  ConnectionTimeout Property
* connector-net-ref-mysqlclient-mysqlconnection-database::  Database Property
* connector-net-ref-mysqlclient-mysqlconnection-datasource::  DataSource Property
* connector-net-ref-mysqlclient-mysqlconnection-serverthread::  ServerThread Property
* connector-net-ref-mysqlclient-mysqlconnection-serverversion::  ServerVersion Property
* connector-net-ref-mysqlclient-mysqlconnection-state::  State Property
* connector-net-ref-mysqlclient-mysqlconnection-usecompression::  UseCompression Property
* connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overloads::  BeginTransaction Method
* connector-net-ref-mysqlclient-mysqlconnection-changedatabase::  `MySqlConnection.ChangeDatabase' Method
* connector-net-ref-mysqlclient-mysqlconnection-close::  `MySqlConnection.Close' Method
* connector-net-ref-mysqlclient-mysqlconnection-createcommand::  `MySqlConnection.CreateCommand' Method
* connector-net-ref-mysqlclient-mysqlconnection-open::  `MySqlConnection.Open' Method
* connector-net-ref-mysqlclient-mysqlconnection-ping::  `MySqlConnection.Ping' Method
* connector-net-ref-mysqlclient-mysqlconnection-infomessage::  `MySqlConnection.InfoMessage' Event
* connector-net-ref-mysqlclient-mysqlconnection-statechange::  `MySqlConnection.StateChange' Event

*Note MySqlConnection overview:
connector-net-ref-mysqlclient-mysqlconnection.

*Public Instance Constructors*

Public instance constructors in the MySqlConnection class.

*Note MySqlConnection:               Overloaded. Initializes a new
connector-net-ref-mysqlclient-mysqlconnectionconstructor.instance of the MySqlConnection
                                     class.

*Public Instance Properties*

Public instance properties in the MySqlConnection class.

*Note ConnectionString:              
connector-net-ref-mysqlclient-mysqlconnection-connectionstring.
*Note ConnectionTimeout:             
connector-net-ref-mysqlclient-mysqlconnection-connectiontimeout.
Container (inherited from Component) Gets the IContainer that contains
                                     the Component.
*Note Database:                      
connector-net-ref-mysqlclient-mysqlconnection-database.
*Note DataSource:                    Gets the name of the MySQL server
connector-net-ref-mysqlclient-mysqlconnection-datasource.to which to connect.
*Note ServerThread:                  Returns the ID of the server thread
connector-net-ref-mysqlclient-mysqlconnection-serverthread.this connection is executing on.
*Note ServerVersion:                 
connector-net-ref-mysqlclient-mysqlconnection-serverversion.
Site (inherited from Component)      Gets or sets the ISite of the
                                     Component.
*Note State:                         
connector-net-ref-mysqlclient-mysqlconnection-state.
*Note UseCompression:                Indicates if this connection should
connector-net-ref-mysqlclient-mysqlconnection-usecompression.use compression when communicating
                                     with the server.

*Public Instance Methods*

Public instance methods in the MySqlConnection class.

*Note BeginTransaction:              Overloaded.
connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overloads.
*Note ChangeDatabase:                
connector-net-ref-mysqlclient-mysqlconnection-changedatabase.
*Note Close:                         
connector-net-ref-mysqlclient-mysqlconnection-close.
*Note CreateCommand:                 
connector-net-ref-mysqlclient-mysqlconnection-createcommand.
CreateObjRef (inherited from         Creates an object that contains all
MarshalByRefObject)                  the relevant information required to
                                     generate a proxy used to
                                     communicate with a remote object.
Dispose (inherited from Component)   Releases all resources used by the
                                     Component.
Equals (inherited from Object)       Determines whether the specified
                                     Object is equal to the current
                                     Object.
GetHashCode (inherited from Object)  Serves as a hash function for a
                                     particular type. GetHashCode is
                                     suitable for use in hashing
                                     algorithms and data structures like
                                     a hash table.
GetLifetimeService (inherited from   Retrieves the current lifetime
MarshalByRefObject)                  service object that controls the
                                     lifetime policy for this instance.
GetType (inherited from Object)      Gets the Type of the current
                                     instance.
InitializeLifetimeService            Obtains a lifetime service object
(inherited from MarshalByRefObject)  to control the lifetime policy for
                                     this instance.
*Note Open:                          
connector-net-ref-mysqlclient-mysqlconnection-open.
*Note Ping:                          Ping
connector-net-ref-mysqlclient-mysqlconnection-ping.
ToString (inherited from Component)  Returns a String containing the
                                     name of the Component, if any. This
                                     method should not be overridden.

*Public Instance Events*

Public instance events in the MySqlConnection class.

Disposed (inherited from Component)  Adds an event handler to listen to
                                     the Disposed event on the component.
*Note InfoMessage:                   
connector-net-ref-mysqlclient-mysqlconnection-infomessage.
*Note StateChange:                   
connector-net-ref-mysqlclient-mysqlconnection-statechange.

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnectionconstructor,  Next: connector-net-ref-mysqlclient-mysqlconnection-connectionstring,  Prev: connector-net-ref-mysqlclient-mysqlconnectionmembers,  Up: connector-net-ref-mysqlclient-mysqlconnectionmembers

22.2.9.13 `MySqlConnection' Constructor
.......................................

* Menu:

* connector-net-ref-mysqlclient-mysqlconnectionconstructor1::  `MySqlConnection' Constructor
* connector-net-ref-mysqlclient-mysqlconnectionconstructor2::  `MySqlConnection' Constructor

Initializes a new instance of the *Note MySqlConnection:
connector-net-ref-mysqlclient-mysqlconnection.  class.

*Overload List*

Initializes a new instance of the *Note MySqlConnection:
connector-net-ref-mysqlclient-mysqlconnection.  class.

   * *Note public MySqlConnection();:
     connector-net-ref-mysqlclient-mysqlconnectionconstructor1.

   * *Note public MySqlConnection(string);:
     connector-net-ref-mysqlclient-mysqlconnectionconstructor2.

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnectionconstructor1,  Next: connector-net-ref-mysqlclient-mysqlconnectionconstructor2,  Prev: connector-net-ref-mysqlclient-mysqlconnectionconstructor,  Up: connector-net-ref-mysqlclient-mysqlconnectionconstructor

22.2.9.14 `MySqlConnection' Constructor
.......................................

Initializes a new instance of the *Note MySqlConnection:
connector-net-ref-mysqlclient-mysqlconnection.  class.

*Syntax: Visual Basic*

     Overloads Public Sub New()

*Syntax: C#*

     public MySqlConnection();

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlConnection Constructor Overload List:
connector-net-ref-mysqlclient-mysqlconnectionconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnectionconstructor2,  Prev: connector-net-ref-mysqlclient-mysqlconnectionconstructor1,  Up: connector-net-ref-mysqlclient-mysqlconnectionconstructor

22.2.9.15 `MySqlConnection' Constructor
.......................................

*Syntax: Visual Basic*

     Overloads Public Sub New( _
        ByVal connectionString As String _
     )

*Syntax: C#*

     public MySqlConnection(
     stringconnectionString
     );

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlConnection Constructor Overload List:
connector-net-ref-mysqlclient-mysqlconnectionconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection-connectionstring,  Next: connector-net-ref-mysqlclient-mysqlconnection-connectiontimeout,  Prev: connector-net-ref-mysqlclient-mysqlconnectionconstructor,  Up: connector-net-ref-mysqlclient-mysqlconnectionmembers

22.2.9.16 ConnectionString Property
...................................

*Syntax: Visual Basic*

     NotOverridable Public Property ConnectionString As String _
     _
       Implements IDbConnection.ConnectionString

*Syntax: C#*

     public string ConnectionString {get; set;}

*Implements*

IDbConnection.ConnectionString

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection-connectiontimeout,  Next: connector-net-ref-mysqlclient-mysqlconnection-database,  Prev: connector-net-ref-mysqlclient-mysqlconnection-connectionstring,  Up: connector-net-ref-mysqlclient-mysqlconnectionmembers

22.2.9.17 ConnectionTimeout Property
....................................

*Syntax: Visual Basic*

     NotOverridable Public ReadOnly Property ConnectionTimeout As Integer _
     _
       Implements IDbConnection.ConnectionTimeout

*Syntax: C#*

     public int ConnectionTimeout {get;}

*Implements*

IDbConnection.ConnectionTimeout

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection-database,  Next: connector-net-ref-mysqlclient-mysqlconnection-datasource,  Prev: connector-net-ref-mysqlclient-mysqlconnection-connectiontimeout,  Up: connector-net-ref-mysqlclient-mysqlconnectionmembers

22.2.9.18 Database Property
...........................

*Syntax: Visual Basic*

     NotOverridable Public ReadOnly Property Database As String _
     _
       Implements IDbConnection.Database

*Syntax: C#*

     public string Database {get;}

*Implements*

IDbConnection.Database

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection-datasource,  Next: connector-net-ref-mysqlclient-mysqlconnection-serverthread,  Prev: connector-net-ref-mysqlclient-mysqlconnection-database,  Up: connector-net-ref-mysqlclient-mysqlconnectionmembers

22.2.9.19 DataSource Property
.............................

Gets the name of the MySQL server to which to connect.

*Syntax: Visual Basic*

     Public ReadOnly Property DataSource As String

*Syntax: C#*

     public string DataSource {get;}

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection-serverthread,  Next: connector-net-ref-mysqlclient-mysqlconnection-serverversion,  Prev: connector-net-ref-mysqlclient-mysqlconnection-datasource,  Up: connector-net-ref-mysqlclient-mysqlconnectionmembers

22.2.9.20 ServerThread Property
...............................

Returns the ID of the server thread this connection is executing on

*Syntax: Visual Basic*

     Public ReadOnly Property ServerThread As Integer

*Syntax: C#*

     public int ServerThread {get;}

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection-serverversion,  Next: connector-net-ref-mysqlclient-mysqlconnection-state,  Prev: connector-net-ref-mysqlclient-mysqlconnection-serverthread,  Up: connector-net-ref-mysqlclient-mysqlconnectionmembers

22.2.9.21 ServerVersion Property
................................

*Syntax: Visual Basic*

     Public ReadOnly Property ServerVersion As String

*Syntax: C#*

     public string ServerVersion {get;}

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection-state,  Next: connector-net-ref-mysqlclient-mysqlconnection-usecompression,  Prev: connector-net-ref-mysqlclient-mysqlconnection-serverversion,  Up: connector-net-ref-mysqlclient-mysqlconnectionmembers

22.2.9.22 State Property
........................

*Syntax: Visual Basic*

     NotOverridable Public ReadOnly Property State As ConnectionState _
     _
       Implements IDbConnection.State

*Syntax: C#*

     public System.Data.ConnectionState State {get;}

*Implements*

IDbConnection.State

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection-usecompression,  Next: connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overloads,  Prev: connector-net-ref-mysqlclient-mysqlconnection-state,  Up: connector-net-ref-mysqlclient-mysqlconnectionmembers

22.2.9.23 UseCompression Property
.................................

Indicates if this connection should use compression when communicating
with the server.

*Syntax: Visual Basic*

     Public ReadOnly Property UseCompression As Boolean

*Syntax: C#*

     public bool UseCompression {get;}

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overloads,  Next: connector-net-ref-mysqlclient-mysqlconnection-changedatabase,  Prev: connector-net-ref-mysqlclient-mysqlconnection-usecompression,  Up: connector-net-ref-mysqlclient-mysqlconnectionmembers

22.2.9.24 BeginTransaction Method
.................................

* Menu:

* connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overload-1::  `MySqlConnection.BeginTransaction' Method
* connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overload-2::  `MySqlConnection.BeginTransaction' Method

*Overload List*

   * *Note public MySqlTransaction BeginTransaction();:
     connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overload-1.

   * *Note public MySqlTransaction BeginTransaction(IsolationLevel);:
     connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overload-2.

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overload-1,  Next: connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overloads,  Up: connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overloads

22.2.9.25 `MySqlConnection.BeginTransaction' Method
...................................................

* Menu:

* connector-net-ref-mysqlclient-mysqltransaction::  `MySqlTransaction' Class

*Syntax: Visual Basic*

     Overloads Public Function BeginTransaction() As MySqlTransaction

*Syntax: C#*

     public MySqlTransaction BeginTransaction();

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlConnection.BeginTransaction Overload List:
connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqltransaction,  Prev: connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overload-1,  Up: connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overload-1

22.2.9.26 `MySqlTransaction' Class
..................................

* Menu:

* connector-net-ref-mysqlclient-mysqltransactionmembers::  `MySqlTransaction' Members

For a list of all members of this type, see *Note MySqlTransaction
Members: connector-net-ref-mysqlclient-mysqltransactionmembers .

*Syntax: Visual Basic*

     NotInheritable Public Class MySqlTransaction_
       Implements IDbTransaction, IDisposable

*Syntax: C#*

     public sealed class MySqlTransaction : IDbTransaction, IDisposable

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySqlTransaction Members:
connector-net-ref-mysqlclient-mysqltransactionmembers, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqltransactionmembers,  Prev: connector-net-ref-mysqlclient-mysqltransaction,  Up: connector-net-ref-mysqlclient-mysqltransaction

22.2.9.27 `MySqlTransaction' Members
....................................

* Menu:

* connector-net-ref-mysqlclient-mysqltransaction-connection::  Connection Property
* connector-net-ref-mysqlclient-mysqltransaction-isolationlevel::  IsolationLevel Property
* connector-net-ref-mysqlclient-mysqltransaction-commit::  `MySqlTransaction.Commit' Method
* connector-net-ref-mysqlclient-mysqltransaction-rollback::  `MySqlTransaction.Rollback' Method

*Note MySqlTransaction overview:
connector-net-ref-mysqlclient-mysqltransaction.

*Public Instance Properties*

Public instance properties in the MySqlTransaction class.

*Note Connection:                    Gets the *Note MySqlConnection:
connector-net-ref-mysqlclient-mysqltransaction-connection.connector-net-ref-mysqlclient-mysqlconnection.
                                     object associated with the
                                     transaction, or a null reference
                                     (Nothing in Visual Basic) if the
                                     transaction is no longer valid.
*Note IsolationLevel:                Specifies the IsolationLevel for
connector-net-ref-mysqlclient-mysqltransaction-isolationlevel.this transaction.

*Public Instance Methods*

Public instance methods in the MySqlTransaction class.

*Note Commit:                        
connector-net-ref-mysqlclient-mysqltransaction-commit.
Equals (inherited from Object)       Determines whether the specified
                                     Object is equal to the current
                                     Object.
GetHashCode (inherited from Object)  Serves as a hash function for a
                                     particular type. GetHashCode is
                                     suitable for use in hashing
                                     algorithms and data structures like
                                     a hash table.
GetType (inherited from Object)      Gets the Type of the current
                                     instance.
*Note Rollback:                      
connector-net-ref-mysqlclient-mysqltransaction-rollback.
ToString (inherited from Object)     Returns a String that represents
                                     the current Object.

*See Also*

*Note MySqlTransaction Class:
connector-net-ref-mysqlclient-mysqltransaction, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqltransaction-connection,  Next: connector-net-ref-mysqlclient-mysqltransaction-isolationlevel,  Prev: connector-net-ref-mysqlclient-mysqltransactionmembers,  Up: connector-net-ref-mysqlclient-mysqltransactionmembers

22.2.9.28 Connection Property
.............................

Gets the *Note MySqlConnection:
connector-net-ref-mysqlclient-mysqlconnection.  object associated with
the transaction, or a null reference (Nothing in Visual Basic) if the
transaction is no longer valid.

*Syntax: Visual Basic*

     Public ReadOnly Property Connection As MySqlConnection

*Syntax: C#*

     public MySqlConnection Connection {get;}

*Property Value*

The *Note MySqlConnection:
connector-net-ref-mysqlclient-mysqlconnection.  object associated with
this transaction.

*Remarks*

A single application may have multiple database connections, each with
zero or more transactions. This property enables you to determine the
connection object associated with a particular transaction created by
*Note BeginTransaction:
connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overload-1.

*See Also*

*Note MySqlTransaction Class:
connector-net-ref-mysqlclient-mysqltransaction, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqltransaction-isolationlevel,  Next: connector-net-ref-mysqlclient-mysqltransaction-commit,  Prev: connector-net-ref-mysqlclient-mysqltransaction-connection,  Up: connector-net-ref-mysqlclient-mysqltransactionmembers

22.2.9.29 IsolationLevel Property
.................................

Specifies the IsolationLevel for this transaction.

*Syntax: Visual Basic*

     NotOverridable Public ReadOnly Property IsolationLevel As IsolationLevel _
     _
       Implements IDbTransaction.IsolationLevel

*Syntax: C#*

     public System.Data.IsolationLevel IsolationLevel {get;}

*Property Value*

The IsolationLevel for this transaction. The default is ReadCommitted.

*Implements*

IDbTransaction.IsolationLevel

*Remarks*

Parallel transactions are not supported.  Therefore, the IsolationLevel
applies to the entire transaction.

*See Also*

*Note MySqlTransaction Class:
connector-net-ref-mysqlclient-mysqltransaction, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqltransaction-commit,  Next: connector-net-ref-mysqlclient-mysqltransaction-rollback,  Prev: connector-net-ref-mysqlclient-mysqltransaction-isolationlevel,  Up: connector-net-ref-mysqlclient-mysqltransactionmembers

22.2.9.30 `MySqlTransaction.Commit' Method
..........................................

*Syntax: Visual Basic*

     NotOverridable Public Sub Commit() _
     _
       Implements IDbTransaction.Commit

*Syntax: C#*

     public void Commit();

*Implements*

IDbTransaction.Commit

*See Also*

*Note MySqlTransaction Class:
connector-net-ref-mysqlclient-mysqltransaction, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqltransaction-rollback,  Prev: connector-net-ref-mysqlclient-mysqltransaction-commit,  Up: connector-net-ref-mysqlclient-mysqltransactionmembers

22.2.9.31 `MySqlTransaction.Rollback' Method
............................................

*Syntax: Visual Basic*

     NotOverridable Public Sub Rollback() _
     _
       Implements IDbTransaction.Rollback

*Syntax: C#*

     public void Rollback();

*Implements*

IDbTransaction.Rollback

*See Also*

*Note MySqlTransaction Class:
connector-net-ref-mysqlclient-mysqltransaction, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overload-1,  Up: connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overloads

22.2.9.32 `MySqlConnection.BeginTransaction' Method
...................................................

*Syntax: Visual Basic*

     Overloads Public Function BeginTransaction( _
        ByVal iso As IsolationLevel _
     ) As MySqlTransaction

*Syntax: C#*

     public MySqlTransaction BeginTransaction(
     IsolationLeveliso
     );

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlConnection.BeginTransaction Overload List:
connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection-changedatabase,  Next: connector-net-ref-mysqlclient-mysqlconnection-close,  Prev: connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overloads,  Up: connector-net-ref-mysqlclient-mysqlconnectionmembers

22.2.9.33 `MySqlConnection.ChangeDatabase' Method
.................................................

*Syntax: Visual Basic*

     NotOverridable Public Sub ChangeDatabase( _
        ByVal databaseName As String _
     ) _
     _
       Implements IDbConnection.ChangeDatabase

*Syntax: C#*

     public void ChangeDatabase(
     stringdatabaseName
     );

*Implements*

IDbConnection.ChangeDatabase

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection-close,  Next: connector-net-ref-mysqlclient-mysqlconnection-createcommand,  Prev: connector-net-ref-mysqlclient-mysqlconnection-changedatabase,  Up: connector-net-ref-mysqlclient-mysqlconnectionmembers

22.2.9.34 `MySqlConnection.Close' Method
........................................

*Syntax: Visual Basic*

     NotOverridable Public Sub Close() _
     _
       Implements IDbConnection.Close

*Syntax: C#*

     public void Close();

*Implements*

IDbConnection.Close

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection-createcommand,  Next: connector-net-ref-mysqlclient-mysqlconnection-open,  Prev: connector-net-ref-mysqlclient-mysqlconnection-close,  Up: connector-net-ref-mysqlclient-mysqlconnectionmembers

22.2.9.35 `MySqlConnection.CreateCommand' Method
................................................

*Syntax: Visual Basic*

     Public Function CreateCommand() As MySqlCommand

*Syntax: C#*

     public MySqlCommand CreateCommand();

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection-open,  Next: connector-net-ref-mysqlclient-mysqlconnection-ping,  Prev: connector-net-ref-mysqlclient-mysqlconnection-createcommand,  Up: connector-net-ref-mysqlclient-mysqlconnectionmembers

22.2.9.36 `MySqlConnection.Open' Method
.......................................

*Syntax: Visual Basic*

     NotOverridable Public Sub Open() _
     _
       Implements IDbConnection.Open

*Syntax: C#*

     public void Open();

*Implements*

IDbConnection.Open

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection-ping,  Next: connector-net-ref-mysqlclient-mysqlconnection-infomessage,  Prev: connector-net-ref-mysqlclient-mysqlconnection-open,  Up: connector-net-ref-mysqlclient-mysqlconnectionmembers

22.2.9.37 `MySqlConnection.Ping' Method
.......................................

Ping

*Syntax: Visual Basic*

     Public Function Ping() As Boolean

*Syntax: C#*

     public bool Ping();

*Return Value*

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection-infomessage,  Next: connector-net-ref-mysqlclient-mysqlconnection-statechange,  Prev: connector-net-ref-mysqlclient-mysqlconnection-ping,  Up: connector-net-ref-mysqlclient-mysqlconnectionmembers

22.2.9.38 `MySqlConnection.InfoMessage' Event
.............................................

* Menu:

* connector-net-ref-mysqlclient-mysqlinfomessageeventhandler::  `MySqlInfoMessageEventHandler' Delegate

*Syntax: Visual Basic*

     Public Event InfoMessage As MySqlInfoMessageEventHandler

*Syntax: C#*

     public event MySqlInfoMessageEventHandler InfoMessage;

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlinfomessageeventhandler,  Prev: connector-net-ref-mysqlclient-mysqlconnection-infomessage,  Up: connector-net-ref-mysqlclient-mysqlconnection-infomessage

22.2.9.39 `MySqlInfoMessageEventHandler' Delegate
.................................................

* Menu:

* connector-net-ref-mysqlclient-mysqlinfomessageeventargs::  `MySqlInfoMessageEventArgs' Class

Represents the method that will handle the *Note InfoMessage:
connector-net-ref-mysqlclient-mysqlconnection-infomessage.  event of a
*Note MySqlConnection: connector-net-ref-mysqlclient-mysqlconnection.

*Syntax: Visual Basic*

     Public Delegate Sub MySqlInfoMessageEventHandler( _
        ByVal sender As Object, _
        ByVal args As MySqlInfoMessageEventArgs _
     )

*Syntax: C#*

     public delegate void MySqlInfoMessageEventHandler(
     objectsender,
     MySqlInfoMessageEventArgsargs
     );

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlinfomessageeventargs,  Prev: connector-net-ref-mysqlclient-mysqlinfomessageeventhandler,  Up: connector-net-ref-mysqlclient-mysqlinfomessageeventhandler

22.2.9.40 `MySqlInfoMessageEventArgs' Class
...........................................

* Menu:

* connector-net-ref-mysqlclient-mysqlinfomessageeventargsmembers::  `MySqlInfoMessageEventArgs' Members

Provides data for the InfoMessage event. This class cannot be inherited.

For a list of all members of this type, see *Note
MySqlInfoMessageEventArgs Members:
connector-net-ref-mysqlclient-mysqlinfomessageeventargsmembers .

*Syntax: Visual Basic*

     Public Class MySqlInfoMessageEventArgs_
       Inherits EventArgs

*Syntax: C#*

     public class MySqlInfoMessageEventArgs : EventArgs

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySqlInfoMessageEventArgs Members:
connector-net-ref-mysqlclient-mysqlinfomessageeventargsmembers, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlinfomessageeventargsmembers,  Prev: connector-net-ref-mysqlclient-mysqlinfomessageeventargs,  Up: connector-net-ref-mysqlclient-mysqlinfomessageeventargs

22.2.9.41 `MySqlInfoMessageEventArgs' Members
.............................................

* Menu:

* connector-net-ref-mysqlclient-mysqlinfomessageeventargsconstructor::  `MySqlInfoMessageEventArgs' Constructor
* connector-net-ref-mysqlclient-mysqlinfomessageeventargs-errors::  `MySqlInfoMessageEventArgs.errors' Field

*Note MySqlInfoMessageEventArgs overview:
connector-net-ref-mysqlclient-mysqlinfomessageeventargs.

*Public Instance Constructors*

Public instance constructors in the MySqlInfoMessageEventArgs class.

*Note MySqlInfoMessageEventArgs      Initializes a new instance of the
Constructor:                         *Note MySqlInfoMessageEventArgs:
connector-net-ref-mysqlclient-mysqlinfomessageeventargsconstructor.connector-net-ref-mysqlclient-mysqlinfomessageeventargs.
                                     class.

*Public Instance Fields*

Public instance fields in the MySqlInfoMessageEventArgs class.

*Note errors:                        
connector-net-ref-mysqlclient-mysqlinfomessageeventargs-errors.

*Public Instance Methods*

Public instance methods in the MySqlInfoMessageEventArgs class.

Equals (inherited from Object)       Determines whether the specified
                                     Object is equal to the current
                                     Object.
GetHashCode (inherited from Object)  Serves as a hash function for a
                                     particular type. GetHashCode is
                                     suitable for use in hashing
                                     algorithms and data structures like
                                     a hash table.
GetType (inherited from Object)      Gets the Type of the current
                                     instance.
ToString (inherited from Object)     Returns a String that represents
                                     the current Object.

*Protected Instance Methods*

Protected instance methods in the MySqlInfoMessageEventArgs class.

Finalize (inherited from Object)     Allows an Object to attempt to free
                                     resources and perform other cleanup
                                     operations before the Object is
                                     reclaimed by garbage collection.
MemberwiseClone (inherited from      Creates a shallow copy of the
Object)                              current Object.

*See Also*

*Note MySqlInfoMessageEventArgs Class:
connector-net-ref-mysqlclient-mysqlinfomessageeventargs, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlinfomessageeventargsconstructor,  Next: connector-net-ref-mysqlclient-mysqlinfomessageeventargs-errors,  Prev: connector-net-ref-mysqlclient-mysqlinfomessageeventargsmembers,  Up: connector-net-ref-mysqlclient-mysqlinfomessageeventargsmembers

22.2.9.42 `MySqlInfoMessageEventArgs' Constructor
.................................................

Initializes a new instance of the *Note MySqlInfoMessageEventArgs:
connector-net-ref-mysqlclient-mysqlinfomessageeventargs.  class.

*Syntax: Visual Basic*

     Public Sub New()

*Syntax: C#*

     public MySqlInfoMessageEventArgs();

*See Also*

*Note MySqlInfoMessageEventArgs Class:
connector-net-ref-mysqlclient-mysqlinfomessageeventargs, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlinfomessageeventargs-errors,  Prev: connector-net-ref-mysqlclient-mysqlinfomessageeventargsconstructor,  Up: connector-net-ref-mysqlclient-mysqlinfomessageeventargsmembers

22.2.9.43 `MySqlInfoMessageEventArgs.errors' Field
..................................................

* Menu:

* connector-net-ref-mysqlclient-mysqlerror::  `MySqlError' Class

*Syntax: Visual Basic*

     Public errors As MySqlError()

*Syntax: C#*

     public MySqlError[] errors;

*See Also*

*Note MySqlInfoMessageEventArgs Class:
connector-net-ref-mysqlclient-mysqlinfomessageeventargs, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlerror,  Prev: connector-net-ref-mysqlclient-mysqlinfomessageeventargs-errors,  Up: connector-net-ref-mysqlclient-mysqlinfomessageeventargs-errors

22.2.9.44 `MySqlError' Class
............................

* Menu:

* connector-net-ref-mysqlclient-mysqlerrormembers::  `MySqlError' Members

Collection of error codes that can be returned by the server

For a list of all members of this type, see *Note MySqlError Members:
connector-net-ref-mysqlclient-mysqlerrormembers .

*Syntax: Visual Basic*

     Public Class MySqlError

*Syntax: C#*

     public class MySqlError

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe for
multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySqlError Members:
connector-net-ref-mysqlclient-mysqlerrormembers, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlerrormembers,  Prev: connector-net-ref-mysqlclient-mysqlerror,  Up: connector-net-ref-mysqlclient-mysqlerror

22.2.9.45 `MySqlError' Members
..............................

* Menu:

* connector-net-ref-mysqlclient-mysqlerrorconstructor::  `MySqlError' Constructor
* connector-net-ref-mysqlclient-mysqlerror-code::  Code Property
* connector-net-ref-mysqlclient-mysqlerror-level::  Level Property
* connector-net-ref-mysqlclient-mysqlerror-message::  Message Property

*Note MySqlError overview: connector-net-ref-mysqlclient-mysqlerror.

*Public Instance Constructors*

Public instance constructors in the MySqlError class.

*Note MySqlError Constructor:        
connector-net-ref-mysqlclient-mysqlerrorconstructor.

*Public Instance Properties*

Public instance properties in the MySqlError class.

*Note Code:                          Error code
connector-net-ref-mysqlclient-mysqlerror-code.
*Note Level:                         Error level
connector-net-ref-mysqlclient-mysqlerror-level.
*Note Message:                       Error message
connector-net-ref-mysqlclient-mysqlerror-message.

*Public Instance Methods*

Public instance methods in the MySqlError class.

Equals (inherited from Object)       Determines whether the specified
                                     Object is equal to the current
                                     Object.
GetHashCode (inherited from Object)  Serves as a hash function for a
                                     particular type. GetHashCode is
                                     suitable for use in hashing
                                     algorithms and data structures like
                                     a hash table.
GetType (inherited from Object)      Gets the Type of the current
                                     instance.
ToString (inherited from Object)     Returns a String that represents
                                     the current Object.

*Protected Instance Methods*

Protected instance methods in the MySqlError class.

Finalize (inherited from Object)     Allows an Object to attempt to free
                                     resources and perform other cleanup
                                     operations before the Object is
                                     reclaimed by garbage collection.
MemberwiseClone (inherited from      Creates a shallow copy of the
Object)                              current Object.

*See Also*

*Note MySqlError Class: connector-net-ref-mysqlclient-mysqlerror, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlerrorconstructor,  Next: connector-net-ref-mysqlclient-mysqlerror-code,  Prev: connector-net-ref-mysqlclient-mysqlerrormembers,  Up: connector-net-ref-mysqlclient-mysqlerrormembers

22.2.9.46 `MySqlError' Constructor
..................................

*Syntax: Visual Basic*

     Public Sub New( _
        ByVal level As String, _
        ByVal code As Integer, _
        ByVal message As String _
     )

*Syntax: C#*

     public MySqlError(
     stringlevel,
     intcode,
     stringmessage
     );

*Parameters*

   * `level':

   * `code':

   * `message':

*See Also*

*Note MySqlError Class: connector-net-ref-mysqlclient-mysqlerror, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlerror-code,  Next: connector-net-ref-mysqlclient-mysqlerror-level,  Prev: connector-net-ref-mysqlclient-mysqlerrorconstructor,  Up: connector-net-ref-mysqlclient-mysqlerrormembers

22.2.9.47 Code Property
.......................

Error code

*Syntax: Visual Basic*

     Public ReadOnly Property Code As Integer

*Syntax: C#*

     public int Code {get;}

*See Also*

*Note MySqlError Class: connector-net-ref-mysqlclient-mysqlerror, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlerror-level,  Next: connector-net-ref-mysqlclient-mysqlerror-message,  Prev: connector-net-ref-mysqlclient-mysqlerror-code,  Up: connector-net-ref-mysqlclient-mysqlerrormembers

22.2.9.48 Level Property
........................

Error level

*Syntax: Visual Basic*

     Public ReadOnly Property Level As String

*Syntax: C#*

     public string Level {get;}

*See Also*

*Note MySqlError Class: connector-net-ref-mysqlclient-mysqlerror, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlerror-message,  Prev: connector-net-ref-mysqlclient-mysqlerror-level,  Up: connector-net-ref-mysqlclient-mysqlerrormembers

22.2.9.49 Message Property
..........................

Error message

*Syntax: Visual Basic*

     Public ReadOnly Property Message As String

*Syntax: C#*

     public string Message {get;}

*See Also*

*Note MySqlError Class: connector-net-ref-mysqlclient-mysqlerror, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlconnection-statechange,  Prev: connector-net-ref-mysqlclient-mysqlconnection-infomessage,  Up: connector-net-ref-mysqlclient-mysqlconnectionmembers

22.2.9.50 `MySqlConnection.StateChange' Event
.............................................

*Syntax: Visual Basic*

     Public Event StateChange As StateChangeEventHandler

*Syntax: C#*

     public event StateChangeEventHandler StateChange;

*See Also*

*Note MySqlConnection Class:
connector-net-ref-mysqlclient-mysqlconnection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandconstructor4,  Prev: connector-net-ref-mysqlclient-mysqlcommandconstructor3,  Up: connector-net-ref-mysqlclient-mysqlcommandconstructor

22.2.9.51 `MySqlCommand' Constructor
....................................

*Syntax: Visual Basic*

     Overloads Public Sub New( _
        ByVal cmdText As String, _
        ByVal connection As MySqlConnection, _
        ByVal transaction As MySqlTransaction _
     )

*Syntax: C#*

     public MySqlCommand(
     stringcmdText,
     MySqlConnectionconnection,
     MySqlTransactiontransaction
     );

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient,
*Note MySqlCommand Constructor Overload List:
connector-net-ref-mysqlclient-mysqlcommandconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommand-commandtext,  Next: connector-net-ref-mysqlclient-mysqlcommand-commandtimeout,  Prev: connector-net-ref-mysqlclient-mysqlcommandconstructor,  Up: connector-net-ref-mysqlclient-mysqlcommandmembers

22.2.9.52 CommandText Property
..............................

*Syntax: Visual Basic*

     NotOverridable Public Property CommandText As String _
     _
       Implements IDbCommand.CommandText

*Syntax: C#*

     public string CommandText {get; set;}

*Implements*

IDbCommand.CommandText

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommand-commandtimeout,  Next: connector-net-ref-mysqlclient-mysqlcommand-commandtype,  Prev: connector-net-ref-mysqlclient-mysqlcommand-commandtext,  Up: connector-net-ref-mysqlclient-mysqlcommandmembers

22.2.9.53 CommandTimeout Property
.................................

*Syntax: Visual Basic*

     NotOverridable Public Property CommandTimeout As Integer _
     _
       Implements IDbCommand.CommandTimeout

*Syntax: C#*

     public int CommandTimeout {get; set;}

*Implements*

IDbCommand.CommandTimeout

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommand-commandtype,  Next: connector-net-ref-mysqlclient-mysqlcommand-connection,  Prev: connector-net-ref-mysqlclient-mysqlcommand-commandtimeout,  Up: connector-net-ref-mysqlclient-mysqlcommandmembers

22.2.9.54 CommandType Property
..............................

*Syntax: Visual Basic*

     NotOverridable Public Property CommandType As CommandType _
     _
       Implements IDbCommand.CommandType

*Syntax: C#*

     public System.Data.CommandType CommandType {get; set;}

*Implements*

IDbCommand.CommandType

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommand-connection,  Next: connector-net-ref-mysqlclient-mysqlcommand-isprepared,  Prev: connector-net-ref-mysqlclient-mysqlcommand-commandtype,  Up: connector-net-ref-mysqlclient-mysqlcommandmembers

22.2.9.55 Connection Property
.............................

*Syntax: Visual Basic*

     Public Property Connection As MySqlConnection

*Syntax: C#*

     public MySqlConnection Connection {get; set;}

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommand-isprepared,  Next: connector-net-ref-mysqlclient-mysqlcommand-parameters,  Prev: connector-net-ref-mysqlclient-mysqlcommand-connection,  Up: connector-net-ref-mysqlclient-mysqlcommandmembers

22.2.9.56 IsPrepared Property
.............................

*Syntax: Visual Basic*

     Public ReadOnly Property IsPrepared As Boolean

*Syntax: C#*

     public bool IsPrepared {get;}

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommand-parameters,  Next: connector-net-ref-mysqlclient-mysqlcommand-transaction,  Prev: connector-net-ref-mysqlclient-mysqlcommand-isprepared,  Up: connector-net-ref-mysqlclient-mysqlcommandmembers

22.2.9.57 Parameters Property
.............................

* Menu:

* connector-net-ref-mysqlclient-mysqlparametercollection::  `MySqlParameterCollection' Class

*Syntax: Visual Basic*

     Public ReadOnly Property Parameters As MySqlParameterCollection

*Syntax: C#*

     public MySqlParameterCollection Parameters {get;}

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection,  Prev: connector-net-ref-mysqlclient-mysqlcommand-parameters,  Up: connector-net-ref-mysqlclient-mysqlcommand-parameters

22.2.9.58 `MySqlParameterCollection' Class
..........................................

* Menu:

* connector-net-ref-mysqlclient-mysqlparametercollectionmembers::  `MySqlParameterCollection' Members

Represents a collection of parameters relevant to a *Note MySqlCommand:
connector-net-ref-mysqlclient-mysqlcommand.  as well as their
respective mappings to columns in a DataSet. This class cannot be
inherited.

For a list of all members of this type, see *Note
MySqlParameterCollection Members:
connector-net-ref-mysqlclient-mysqlparametercollectionmembers .

*Syntax: Visual Basic*

     NotInheritable Public Class MySqlParameterCollection_
       Inherits MarshalByRefObject_
       Implements IDataParameterCollection, IList, ICollection, IEnumerable

*Syntax: C#*

     public sealed class MySqlParameterCollection : MarshalByRefObject, IDataParameterCollection, IList, ICollection, IEnumerable

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySqlParameterCollection Members:
connector-net-ref-mysqlclient-mysqlparametercollectionmembers, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollectionmembers,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection,  Up: connector-net-ref-mysqlclient-mysqlparametercollection

22.2.9.59 `MySqlParameterCollection' Members
............................................

* Menu:

* connector-net-ref-mysqlclient-mysqlparametercollectionconstructor::  `MySqlParameterCollection' Constructor
* connector-net-ref-mysqlclient-mysqlparametercollection-count::  Count Property
* connector-net-ref-mysqlclient-mysqlparametercollectionitem::  Item Property
* connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads::  Add Method
* connector-net-ref-mysqlclient-mysqlparametercollection-clear::  `MySqlParameterCollection.Clear' Method
* connector-net-ref-mysqlclient-mysqlparametercollection-contains-overloads::  Contains Method
* connector-net-ref-mysqlclient-mysqlparametercollection-copyto::  `MySqlParameterCollection.CopyTo' Method
* connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overloads::  IndexOf Method
* connector-net-ref-mysqlclient-mysqlparametercollection-insert::  `MySqlParameterCollection.Insert' Method
* connector-net-ref-mysqlclient-mysqlparametercollection-remove::  `MySqlParameterCollection.Remove' Method
* connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overloads::  RemoveAt Method

*Note MySqlParameterCollection overview:
connector-net-ref-mysqlclient-mysqlparametercollection.

*Public Instance Constructors*

Public instance constructors in the MySqlParameterCollection class.

*Note MySqlParameterCollection       Initializes a new instance of the
Constructor:                         *Note MySqlParameterCollection:
connector-net-ref-mysqlclient-mysqlparametercollectionconstructor.connector-net-ref-mysqlclient-mysqlparametercollection.
                                     class.

*Public Instance Properties*

Public instance properties in the MySqlParameterCollection class.

*Note Count:                         Gets the number of MySqlParameter
connector-net-ref-mysqlclient-mysqlparametercollection-count.objects in the collection.
*Note Item:                          Overloaded. Gets the *Note
connector-net-ref-mysqlclient-mysqlparametercollectionitem.MySqlParameter:
                                     connector-net-ref-mysqlclient-mysqlparameter.
                                     with a specified attribute. In C#,
                                     this property is the indexer for the
                                     *Note MySqlParameterCollection:
                                     connector-net-ref-mysqlclient-mysqlparametercollection.
                                     class.

*Public Instance Methods*

Public instance methods in the MySqlParameterCollection class.

*Note Add:                           Overloaded. Adds the specified
connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads.*Note MySqlParameter:
                                     connector-net-ref-mysqlclient-mysqlparameter.
                                     object to the *Note
                                     MySqlParameterCollection:
                                     connector-net-ref-mysqlclient-mysqlparametercollection.
*Note Clear:                         Removes all items from the
connector-net-ref-mysqlclient-mysqlparametercollection-clear.collection.
*Note Contains:                      Overloaded. Gets a value indicating
connector-net-ref-mysqlclient-mysqlparametercollection-contains-overloads.whether a *Note MySqlParameter:
                                     connector-net-ref-mysqlclient-mysqlparameter.
                                     exists in the collection.
*Note CopyTo:                        Copies MySqlParameter objects from
connector-net-ref-mysqlclient-mysqlparametercollection-copyto.the MySqlParameterCollection to the
                                     specified array.
CreateObjRef (inherited from         Creates an object that contains all
MarshalByRefObject)                  the relevant information required to
                                     generate a proxy used to
                                     communicate with a remote object.
Equals (inherited from Object)       Determines whether the specified
                                     Object is equal to the current
                                     Object.
GetHashCode (inherited from Object)  Serves as a hash function for a
                                     particular type. GetHashCode is
                                     suitable for use in hashing
                                     algorithms and data structures like
                                     a hash table.
GetLifetimeService (inherited from   Retrieves the current lifetime
MarshalByRefObject)                  service object that controls the
                                     lifetime policy for this instance.
GetType (inherited from Object)      Gets the Type of the current
                                     instance.
*Note IndexOf:                       Overloaded. Gets the location of a
connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overloads.*Note MySqlParameter:
                                     connector-net-ref-mysqlclient-mysqlparameter.
                                     in the collection.
InitializeLifetimeService            Obtains a lifetime service object
(inherited from MarshalByRefObject)  to control the lifetime policy for
                                     this instance.
*Note Insert:                        Inserts a MySqlParameter into the
connector-net-ref-mysqlclient-mysqlparametercollection-insert.collection at the specified index.
*Note Remove:                        Removes the specified
connector-net-ref-mysqlclient-mysqlparametercollection-remove.MySqlParameter from the collection.
*Note RemoveAt:                      Overloaded. Removes the specified
connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overloads.*Note MySqlParameter:
                                     connector-net-ref-mysqlclient-mysqlparameter.
                                     from the collection.
ToString (inherited from Object)     Returns a String that represents
                                     the current Object.

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollectionconstructor,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-count,  Prev: connector-net-ref-mysqlclient-mysqlparametercollectionmembers,  Up: connector-net-ref-mysqlclient-mysqlparametercollectionmembers

22.2.9.60 `MySqlParameterCollection' Constructor
................................................

Initializes a new instance of the *Note MySqlParameterCollection:
connector-net-ref-mysqlclient-mysqlparametercollection.  class.

*Syntax: Visual Basic*

     Public Sub New()

*Syntax: C#*

     public MySqlParameterCollection();

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-count,  Next: connector-net-ref-mysqlclient-mysqlparametercollectionitem,  Prev: connector-net-ref-mysqlclient-mysqlparametercollectionconstructor,  Up: connector-net-ref-mysqlclient-mysqlparametercollectionmembers

22.2.9.61 Count Property
........................

Gets the number of MySqlParameter objects in the collection.

*Syntax: Visual Basic*

     NotOverridable Public ReadOnly Property Count As Integer _
     _
       Implements ICollection.Count

*Syntax: C#*

     public int Count {get;}

*Implements*

ICollection.Count

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollectionitem,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-count,  Up: connector-net-ref-mysqlclient-mysqlparametercollectionmembers

22.2.9.62 Item Property
.......................

* Menu:

* connector-net-ref-mysqlclient-mysqlparameter::  `MySqlParameter' Class
* connector-net-ref-mysqlclient-mysqlparametercollection-item1::  Item Property (Int32)
* connector-net-ref-mysqlclient-mysqlparametercollection-item2::  Item Property (String)

Gets the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  with a specified
attribute. In C#, this property is the indexer for the *Note
MySqlParameterCollection:
connector-net-ref-mysqlclient-mysqlparametercollection.  class.

*Overload List*

Gets the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  at the specified index.

   * *Note public MySqlParameter this[int] {get; set;}:
     connector-net-ref-mysqlclient-mysqlparametercollection-item1.

Gets the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  with the specified name.

   * *Note public MySqlParameter this[string] {get; set;}:
     connector-net-ref-mysqlclient-mysqlparametercollection-item2.

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameter,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-item1,  Prev: connector-net-ref-mysqlclient-mysqlparametercollectionitem,  Up: connector-net-ref-mysqlclient-mysqlparametercollectionitem

22.2.9.63 `MySqlParameter' Class
................................

* Menu:

* connector-net-ref-mysqlclient-mysqlparametermembers::  `MySqlParameter' Members

Represents a parameter to a *Note MySqlCommand:
connector-net-ref-mysqlclient-mysqlcommand, and optionally, its mapping
to DataSetcolumns. This class cannot be inherited.

For a list of all members of this type, see *Note MySqlParameter
Members: connector-net-ref-mysqlclient-mysqlparametermembers .

*Syntax: Visual Basic*

     NotInheritable Public Class MySqlParameter_
       Inherits MarshalByRefObject_
       Implements IDataParameter, IDbDataParameter, ICloneable

*Syntax: C#*

     public sealed class MySqlParameter : MarshalByRefObject, IDataParameter, IDbDataParameter, ICloneable

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations.  Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySqlParameter Members:
connector-net-ref-mysqlclient-mysqlparametermembers, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametermembers,  Prev: connector-net-ref-mysqlclient-mysqlparameter,  Up: connector-net-ref-mysqlclient-mysqlparameter

22.2.9.64 `MySqlParameter' Members
..................................

* Menu:

* connector-net-ref-mysqlclient-mysqlparameterconstructor::  `MySqlParameter' Constructor
* connector-net-ref-mysqlclient-mysqlparameter-dbtype::  DbType Property
* connector-net-ref-mysqlclient-mysqlparameter-direction::  Direction Property
* connector-net-ref-mysqlclient-mysqlparameter-isnullable::  IsNullable Property
* connector-net-ref-mysqlclient-mysqlparameter-isunsigned::  IsUnsigned Property
* connector-net-ref-mysqlclient-mysqlparameter-mysqldbtype::  `MySqlDbType' Property
* connector-net-ref-mysqlclient-mysqlparameter-parametername::  ParameterName Property
* connector-net-ref-mysqlclient-mysqlparameter-precision::  Precision Property
* connector-net-ref-mysqlclient-mysqlparameter-scale::  Scale Property
* connector-net-ref-mysqlclient-mysqlparameter-size::  Size Property
* connector-net-ref-mysqlclient-mysqlparameter-sourcecolumn::  SourceColumn Property
* connector-net-ref-mysqlclient-mysqlparameter-sourceversion::  SourceVersion Property
* connector-net-ref-mysqlclient-mysqlparameter-tostring::  `MySqlParameter.ToString' Method

*Note MySqlParameter overview:
connector-net-ref-mysqlclient-mysqlparameter.

*Public Instance Constructors*

Public instance constructors in the MySqlParameter class.

*Note MySqlParameter:                Overloaded. Initializes a new
connector-net-ref-mysqlclient-mysqlparameterconstructor.instance of the MySqlParameter
                                     class.

*Public Instance Properties*

Public instance properties in the MySqlParameter class.

*Note DbType:                        Gets or sets the DbType of the
connector-net-ref-mysqlclient-mysqlparameter-dbtype.parameter.
*Note Direction:                     Gets or sets a value indicating
connector-net-ref-mysqlclient-mysqlparameter-direction.whether the parameter is input-only,
                                     output-only, bidirectional, or a
                                     stored procedure return value
                                     parameter. As of MySQL version 4.1
                                     and earlier, input-only is the only
                                     valid choice.
*Note IsNullable:                    Gets or sets a value indicating
connector-net-ref-mysqlclient-mysqlparameter-isnullable.whether the parameter accepts null
                                     values.
*Note IsUnsigned:                    
connector-net-ref-mysqlclient-mysqlparameter-isunsigned.
*Note MySqlDbType:                   Gets or sets the MySqlDbType of the
connector-net-ref-mysqlclient-mysqlparameter-mysqldbtype.parameter.
*Note ParameterName:                 Gets or sets the name of the
connector-net-ref-mysqlclient-mysqlparameter-parametername.MySqlParameter.
*Note Precision:                     Gets or sets the maximum number of
connector-net-ref-mysqlclient-mysqlparameter-precision.digits used to represent the *Note
                                     Value:
                                     connector-net-ref-mysqlclient-mysqlparameter-value.
                                     property.
*Note Scale:                         Gets or sets the number of decimal
connector-net-ref-mysqlclient-mysqlparameter-scale.places to which *Note Value:
                                     connector-net-ref-mysqlclient-mysqlparameter-value.
                                     is resolved.
*Note Size:                          Gets or sets the maximum size, in
connector-net-ref-mysqlclient-mysqlparameter-size.bytes, of the data within the
                                     column.
*Note SourceColumn:                  Gets or sets the name of the source
connector-net-ref-mysqlclient-mysqlparameter-sourcecolumn.column that is mapped to the
                                     DataSetand used for loading or
                                     returning the *Note Value:
                                     connector-net-ref-mysqlclient-mysqlparameter-value.
*Note SourceVersion:                 Gets or sets the DataRowVersion to
connector-net-ref-mysqlclient-mysqlparameter-sourceversion.use when loading *Note Value:
                                     connector-net-ref-mysqlclient-mysqlparameter-value.
*Note Value:                         Gets or sets the value of the
connector-net-ref-mysqlclient-mysqlparameter-value.parameter.

*Public Instance Methods*

Public instance methods in the MySqlParameter class.

CreateObjRef (inherited from         Creates an object that contains all
MarshalByRefObject)                  the relevant information required to
                                     generate a proxy used to
                                     communicate with a remote object.
Equals (inherited from Object)       Determines whether the specified
                                     Object is equal to the current
                                     Object.
GetHashCode (inherited from Object)  Serves as a hash function for a
                                     particular type. GetHashCode is
                                     suitable for use in hashing
                                     algorithms and data structures like
                                     a hash table.
GetLifetimeService (inherited from   Retrieves the current lifetime
MarshalByRefObject)                  service object that controls the
                                     lifetime policy for this instance.
GetType (inherited from Object)      Gets the Type of the current
                                     instance.
InitializeLifetimeService            Obtains a lifetime service object
(inherited from MarshalByRefObject)  to control the lifetime policy for
                                     this instance.
*Note ToString:                      Overridden. Gets a string
connector-net-ref-mysqlclient-mysqlparameter-tostring.containing the *Note ParameterName:
                                     connector-net-ref-mysqlclient-mysqlparameter-parametername.

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameterconstructor,  Next: connector-net-ref-mysqlclient-mysqlparameter-dbtype,  Prev: connector-net-ref-mysqlclient-mysqlparametermembers,  Up: connector-net-ref-mysqlclient-mysqlparametermembers

22.2.9.65 `MySqlParameter' Constructor
......................................

* Menu:

* connector-net-ref-mysqlclient-mysqlparameterconstructor1::  `MySqlParameter' Constructor ()
* connector-net-ref-mysqlclient-mysqlparameterconstructor3::  `MySqlParameter' Constructor
* connector-net-ref-mysqlclient-mysqlparameterconstructor4::  `MySqlParameter' Constructor (String, MySqlDbType, Int32)
* connector-net-ref-mysqlclient-mysqlparameterconstructor6::  `MySqlParameter' Constructor
* connector-net-ref-mysqlclient-mysqlparameterconstructor5::  `MySqlParameter' Constructor
* connector-net-ref-mysqlclient-mysqlparameterconstructor2::  `MySqlParameter' Constructor

Initializes a new instance of the MySqlParameter class.

*Overload List*

Initializes a new instance of the MySqlParameter class.

   * *Note public MySqlParameter();:
     connector-net-ref-mysqlclient-mysqlparameterconstructor1.

Initializes a new instance of the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  class with the parameter
name and the data type.

   * *Note public MySqlParameter(string:
     (MySqlDbType);)connector-net-ref-mysqlclient-mysqlparameterconstructor3.

Initializes a new instance of the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  class with the parameter
name, the *Note MySqlDbType: connector-net-ref-mysqlclient-mysqldbtype,
and the size.

   * *Note public MySqlParameter(string:
     (MySqlDbType)connector-net-ref-mysqlclient-mysqlparameterconstructor4.

Initializes a new instance of the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  class with the parameter
name, the type of the parameter, the size of the parameter, a
ParameterDirection, the precision of the parameter, the scale of the
parameter, the source column, a DataRowVersion to use, and the value of
the parameter.

   * *Note public MySqlParameter(string:
     (MySqlDbType)connector-net-ref-mysqlclient-mysqlparameterconstructor6.ParameterDirection,bool,byte,byte,string,DataRowVersion,object);

Initializes a new instance of the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  class with the parameter
name, the *Note MySqlDbType: connector-net-ref-mysqlclient-mysqldbtype,
the size, and the source column name.

   * *Note public MySqlParameter(string:
     (MySqlDbType)connector-net-ref-mysqlclient-mysqlparameterconstructor5.string);

Initializes a new instance of the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  class with the parameter
name and a value of the new MySqlParameter.

   * *Note public MySqlParameter(string:
     (object);)connector-net-ref-mysqlclient-mysqlparameterconstructor2.

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameterconstructor1,  Next: connector-net-ref-mysqlclient-mysqlparameterconstructor3,  Prev: connector-net-ref-mysqlclient-mysqlparameterconstructor,  Up: connector-net-ref-mysqlclient-mysqlparameterconstructor

22.2.9.66 `MySqlParameter' Constructor ()
.........................................

Initializes a new instance of the MySqlParameter class.

*Syntax: Visual Basic*

     Overloads Public Sub New()

*Syntax: C#*

     public MySqlParameter();

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameter Constructor Overload List:
connector-net-ref-mysqlclient-mysqlparameterconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameterconstructor3,  Next: connector-net-ref-mysqlclient-mysqlparameterconstructor4,  Prev: connector-net-ref-mysqlclient-mysqlparameterconstructor1,  Up: connector-net-ref-mysqlclient-mysqlparameterconstructor

22.2.9.67 `MySqlParameter' Constructor
......................................

* Menu:

* connector-net-ref-mysqlclient-mysqldbtype::  `MySqlDbType' Enumeration

Initializes a new instance of the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  class with the parameter
name and the data type.

*Syntax: Visual Basic*

     Overloads Public Sub New( _
        ByVal parameterName As String, _
        ByVal dbType As MySqlDbType _
     )

*Syntax: C#*

     public MySqlParameter(
     stringparameterName,
     MySqlDbTypedbType
     );

*Parameters*

   * `parameterName': The name of the parameter to map.

   * `dbType': One of the *Note MySqlDbType:
     connector-net-ref-mysqlclient-mysqldbtype.  values.

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameter Constructor Overload List:
connector-net-ref-mysqlclient-mysqlparameterconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldbtype,  Prev: connector-net-ref-mysqlclient-mysqlparameterconstructor3,  Up: connector-net-ref-mysqlclient-mysqlparameterconstructor3

22.2.9.68 `MySqlDbType' Enumeration
...................................

Specifies MySQL-specific data type of a field, property, for use in a
*Note MySqlParameter: connector-net-ref-mysqlclient-mysqlparameter.

*Syntax: Visual Basic*

     Public Enum MySqlDbType

*Syntax: C#*

     public enum MySqlDbType

*Members*

Members in the MySqlDbType enumeration.

*Member Name*                        *Description*
Newdate                              Obsolete. Use Datetime or Date type.
Timestamp                            A timestamp. The range is
                                     '1970-01-01 00:00:01.000000' to
                                     '2038-01-19 03:14:07.999999'.
                                     (Fractional seconds can only be
                                     stored with a MySQL 5.6.4 or higher
                                     database server.)
Time                                 The range is '-838:59:59.000000' to
                                     '838:59:59.000000'. (Fractional
                                     seconds can only be stored with a
                                     MySQL 5.6.4 or higher database
                                     server.)
Date                                 The supported range is '1000-01-01'
                                     to '9999-12-31'.
Datetime                             The supported range is '1000-01-01
                                     00:00:00.000000' to '9999-12-31
                                     23:59:59.999999'. (Fractional
                                     seconds can only be stored with a
                                     MySQL 5.6.4 or higher database
                                     server.)
Year                                 A year in 2- or 4-digit format
                                     (default is 4-digit). The allowable
                                     values are 1901 to 2155, 0000 in the
                                     4-digit year format, and 1970-2069
                                     if you use the 2-digit format
                                     (70-69).
TinyBlob                             A BLOB column with a maximum length
                                     of 255 (2^8 - 1) characters.
Blob                                 A BLOB column with a maximum length
                                     of 65535 (2^16 - 1) characters.
MediumBlob                           A BLOB column with a maximum length
                                     of 16777215 (2^24 - 1) characters.
LongBlob                             A BLOB column with a maximum length
                                     of 4294967295 or 4G (2^32 - 1)
                                     characters.
Int16                                A 16-bit signed integer. The signed
                                     range is -32768 to 32767.  The
                                     unsigned range is 0 to 65535.
Int24                                Specifies a 24 (3 byte) signed or
                                     unsigned value.
Int32                                A 32-bit signed integer.
Int64                                A 64-bit signed integer.
Byte                                 The signed range is -128 to 127.
                                     The unsigned range is 0 to 255.
Float                                A small (single-precision)
                                     floating-point number. Allowable
                                     values are -3.402823466E+38 to
                                     -1.175494351E-38, 0, and
                                     1.175494351E-38 to 3.402823466E+38.
Double                               A normal-size (double-precision)
                                     floating-point number. Allowable
                                     values are -1.7976931348623157E+308
                                     to -2.2250738585072014E-308, 0, and
                                     2.2250738585072014E-308 to
                                     1.7976931348623157E+308.
UByte                                An 8-bit unsigned value.
UInt16                               A 16-bit unsigned value.
UInt24                               A 24-bit unsigned value.
UInt32                               A 32-bit unsigned value.
UInt64                               A 64-bit unsigned value.
Decimal                              A fixed precision and scale numeric
                                     value between -10^38-1 and 10^38-1.
NewDecimal                           New Decimal
Set                                  A set. A string object that can
                                     have zero or more values, each of
                                     which must be chosen from the list
                                     of values 'value1', 'value2', ... A
                                     SET can have a maximum of 64
                                     members.
String                               Obsolete. Use VarChar type.
VarChar                              A variable-length string containing
                                     0 to 255 characters.
VarString                            A variable-length string containing
                                     0 to 65535 characters.
Enum                                 An enumeration. A string object
                                     that can have only one value, chosen
                                     from the list of values 'value1',
                                     'value2', ..., NULL or the special
                                     "" error value. An ENUM can have a
                                     maximum of 65535 distinct values.
Geometry                             
Bit                                  Bit-field data type.
TinyText                             A nonbinary string column
                                     supporting a maximum length of 255
                                     (2^8 - 1) characters.
Text                                 A nonbinary string column
                                     supporting a maximum length of
                                     65535 (2^16 - 1) characters.
MediumText                           A nonbinary string column
                                     supporting a maximum length of
                                     16777215 (2^24 - 1) characters.
LongText                             A nonbinary string column
                                     supporting a maximum length of
                                     4294967295 (2^32 - 1) characters.

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameterconstructor4,  Next: connector-net-ref-mysqlclient-mysqlparameterconstructor6,  Prev: connector-net-ref-mysqlclient-mysqlparameterconstructor3,  Up: connector-net-ref-mysqlclient-mysqlparameterconstructor

22.2.9.69 `MySqlParameter' Constructor (String, MySqlDbType, Int32)
...................................................................

Initializes a new instance of the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  class with the parameter
name, the *Note MySqlDbType: connector-net-ref-mysqlclient-mysqldbtype,
and the size.

*Syntax: Visual Basic*

     Overloads Public Sub New( _
        ByVal parameterName As String, _
        ByVal dbType As MySqlDbType, _
        ByVal size As Integer _
     )

*Syntax: C#*

     public MySqlParameter(
     stringparameterName,
     MySqlDbTypedbType,
     intsize
     );

*Parameters*

   * `parameterName': The name of the parameter to map.

   * `dbType': One of the *Note MySqlDbType:
     connector-net-ref-mysqlclient-mysqldbtype.  values.

   * `size': The length of the parameter.

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameter Constructor Overload List:
connector-net-ref-mysqlclient-mysqlparameterconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameterconstructor6,  Next: connector-net-ref-mysqlclient-mysqlparameterconstructor5,  Prev: connector-net-ref-mysqlclient-mysqlparameterconstructor4,  Up: connector-net-ref-mysqlclient-mysqlparameterconstructor

22.2.9.70 `MySqlParameter' Constructor
......................................

* Menu:

* connector-net-ref-mysqlclient-mysqlparameter-value::  Value Property

Initializes a new instance of the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  class with the parameter
name, the type of the parameter, the size of the parameter, a
ParameterDirection, the precision of the parameter, the scale of the
parameter, the source column, a DataRowVersion to use, and the value of
the parameter.

*Syntax: Visual Basic*

     Overloads Public Sub New( _
        ByVal parameterName As String, _
        ByVal dbType As MySqlDbType, _
        ByVal size As Integer, _
        ByVal direction As ParameterDirection, _
        ByVal isNullable As Boolean, _
        ByVal precision As Byte, _
        ByVal scale As Byte, _
        ByVal sourceColumn As String, _
        ByVal sourceVersion As DataRowVersion, _
        ByVal value As Object _
     )

*Syntax: C#*

     public MySqlParameter(
     stringparameterName,
     MySqlDbTypedbType,
     intsize,
     ParameterDirectiondirection,
     boolisNullable,
     byteprecision,
     bytescale,
     stringsourceColumn,
     DataRowVersionsourceVersion,
     objectvalue
     );

*Parameters*

   * `parameterName': The name of the parameter to map.

   * `dbType': One of the *Note MySqlDbType:
     connector-net-ref-mysqlclient-mysqldbtype.  values.

   * `size': The length of the parameter.

   * `direction': One of the ParameterDirectionvalues.

   * `isNullable': true if the value of the field can be null, otherwise
     false.

   * `precision': The total number of digits to the left and right of
     the decimal point to which *Note Value:
     connector-net-ref-mysqlclient-mysqlparameter-value.  is resolved.

   * `scale': The total number of decimal places to which *Note Value:
     connector-net-ref-mysqlclient-mysqlparameter-value.  is resolved.

   * `sourceColumn': The name of the source column.

   * `sourceVersion': One of the DataRowVersionvalues.

   * `value': An Object that is the value of the *Note MySqlParameter:
     connector-net-ref-mysqlclient-mysqlparameter.

*Exceptions*

Exceptions in the MySqlParameter constructor.

*Exception Type*                     *Condition*
ArgumentException                    

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameter Constructor Overload List:
connector-net-ref-mysqlclient-mysqlparameterconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameter-value,  Prev: connector-net-ref-mysqlclient-mysqlparameterconstructor6,  Up: connector-net-ref-mysqlclient-mysqlparameterconstructor6

22.2.9.71 Value Property
........................

Gets or sets the value of the parameter.

*Syntax: Visual Basic*

     NotOverridable Public Property Value As Object _
     _
       Implements IDataParameter.Value

*Syntax: C#*

     public object Value {get; set;}

*Implements*

IDataParameter.Value

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameterconstructor5,  Next: connector-net-ref-mysqlclient-mysqlparameterconstructor2,  Prev: connector-net-ref-mysqlclient-mysqlparameterconstructor6,  Up: connector-net-ref-mysqlclient-mysqlparameterconstructor

22.2.9.72 `MySqlParameter' Constructor
......................................

Initializes a new instance of the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  class with the parameter
name, the *Note MySqlDbType: connector-net-ref-mysqlclient-mysqldbtype,
the size, and the source column name.

*Syntax: Visual Basic*

     Overloads Public Sub New( _
        ByVal parameterName As String, _
        ByVal dbType As MySqlDbType, _
        ByVal size As Integer, _
        ByVal sourceColumn As String _
     )

*Syntax: C#*

     public MySqlParameter(
     stringparameterName,
     MySqlDbTypedbType,
     intsize,
     stringsourceColumn
     );

*Parameters*

   * `parameterName': The name of the parameter to map.

   * `dbType': One of the *Note MySqlDbType:
     connector-net-ref-mysqlclient-mysqldbtype.  values.

   * `size': The length of the parameter.

   * `sourceColumn': The name of the source column.

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameter Constructor Overload List:
connector-net-ref-mysqlclient-mysqlparameterconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameterconstructor2,  Prev: connector-net-ref-mysqlclient-mysqlparameterconstructor5,  Up: connector-net-ref-mysqlclient-mysqlparameterconstructor

22.2.9.73 `MySqlParameter' Constructor
......................................

Initializes a new instance of the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  class with the parameter
name and a value of the new MySqlParameter.

*Syntax: Visual Basic*

     Overloads Public Sub New( _
        ByVal parameterName As String, _
        ByVal value As Object _
     )

*Syntax: C#*

     public MySqlParameter(
     stringparameterName,
     objectvalue
     );

*Parameters*

   * `parameterName': The name of the parameter to map.

   * `value': An Object that is the value of the *Note MySqlParameter:
     connector-net-ref-mysqlclient-mysqlparameter.

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameter Constructor Overload List:
connector-net-ref-mysqlclient-mysqlparameterconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameter-dbtype,  Next: connector-net-ref-mysqlclient-mysqlparameter-direction,  Prev: connector-net-ref-mysqlclient-mysqlparameterconstructor,  Up: connector-net-ref-mysqlclient-mysqlparametermembers

22.2.9.74 DbType Property
.........................

Gets or sets the DbType of the parameter.

*Syntax: Visual Basic*

     NotOverridable Public Property DbType As DbType _
     _
       Implements IDataParameter.DbType

*Syntax: C#*

     public System.Data.DbType DbType {get; set;}

*Implements*

IDataParameter.DbType

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameter-direction,  Next: connector-net-ref-mysqlclient-mysqlparameter-isnullable,  Prev: connector-net-ref-mysqlclient-mysqlparameter-dbtype,  Up: connector-net-ref-mysqlclient-mysqlparametermembers

22.2.9.75 Direction Property
............................

Gets or sets a value indicating whether the parameter is input-only,
output-only, bidirectional, or a stored procedure return value
parameter. As of MySQL version 4.1 and earlier, input-only is the only
valid choice.

*Syntax: Visual Basic*

     NotOverridable Public Property Direction As ParameterDirection _
     _
       Implements IDataParameter.Direction

*Syntax: C#*

     public System.Data.ParameterDirection Direction {get; set;}

*Implements*

IDataParameter.Direction

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameter-isnullable,  Next: connector-net-ref-mysqlclient-mysqlparameter-isunsigned,  Prev: connector-net-ref-mysqlclient-mysqlparameter-direction,  Up: connector-net-ref-mysqlclient-mysqlparametermembers

22.2.9.76 IsNullable Property
.............................

Gets or sets a value indicating whether the parameter accepts null
values.

*Syntax: Visual Basic*

     NotOverridable Public Property IsNullable As Boolean _
     _
       Implements IDataParameter.IsNullable

*Syntax: C#*

     public bool IsNullable {get; set;}

*Implements*

IDataParameter.IsNullable

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameter-isunsigned,  Next: connector-net-ref-mysqlclient-mysqlparameter-mysqldbtype,  Prev: connector-net-ref-mysqlclient-mysqlparameter-isnullable,  Up: connector-net-ref-mysqlclient-mysqlparametermembers

22.2.9.77 IsUnsigned Property
.............................

*Syntax: Visual Basic*

     Public Property IsUnsigned As Boolean

*Syntax: C#*

     public bool IsUnsigned {get; set;}

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameter-mysqldbtype,  Next: connector-net-ref-mysqlclient-mysqlparameter-parametername,  Prev: connector-net-ref-mysqlclient-mysqlparameter-isunsigned,  Up: connector-net-ref-mysqlclient-mysqlparametermembers

22.2.9.78 `MySqlDbType' Property
................................

Gets or sets the MySqlDbType of the parameter.

*Syntax: Visual Basic*

     Public Property MySqlDbType As MySqlDbType

*Syntax: C#*

     public MySqlDbType MySqlDbType {get; set;}

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameter-parametername,  Next: connector-net-ref-mysqlclient-mysqlparameter-precision,  Prev: connector-net-ref-mysqlclient-mysqlparameter-mysqldbtype,  Up: connector-net-ref-mysqlclient-mysqlparametermembers

22.2.9.79 ParameterName Property
................................

Gets or sets the name of the MySqlParameter.

*Syntax: Visual Basic*

     NotOverridable Public Property ParameterName As String _
     _
       Implements IDataParameter.ParameterName

*Syntax: C#*

     public string ParameterName {get; set;}

*Implements*

IDataParameter.ParameterName

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameter-precision,  Next: connector-net-ref-mysqlclient-mysqlparameter-scale,  Prev: connector-net-ref-mysqlclient-mysqlparameter-parametername,  Up: connector-net-ref-mysqlclient-mysqlparametermembers

22.2.9.80 Precision Property
............................

Gets or sets the maximum number of digits used to represent the *Note
Value: connector-net-ref-mysqlclient-mysqlparameter-value.  property.

*Syntax: Visual Basic*

     NotOverridable Public Property Precision As Byte _
     _
       Implements IDbDataParameter.Precision

*Syntax: C#*

     public byte Precision {get; set;}

*Implements*

IDbDataParameter.Precision

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameter-scale,  Next: connector-net-ref-mysqlclient-mysqlparameter-size,  Prev: connector-net-ref-mysqlclient-mysqlparameter-precision,  Up: connector-net-ref-mysqlclient-mysqlparametermembers

22.2.9.81 Scale Property
........................

Gets or sets the number of decimal places to which *Note Value:
connector-net-ref-mysqlclient-mysqlparameter-value.  is resolved.

*Syntax: Visual Basic*

     NotOverridable Public Property Scale As Byte _
     _
       Implements IDbDataParameter.Scale

*Syntax: C#*

     public byte Scale {get; set;}

*Implements*

IDbDataParameter.Scale

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameter-size,  Next: connector-net-ref-mysqlclient-mysqlparameter-sourcecolumn,  Prev: connector-net-ref-mysqlclient-mysqlparameter-scale,  Up: connector-net-ref-mysqlclient-mysqlparametermembers

22.2.9.82 Size Property
.......................

Gets or sets the maximum size, in bytes, of the data within the column.

*Syntax: Visual Basic*

     NotOverridable Public Property Size As Integer _
     _
       Implements IDbDataParameter.Size

*Syntax: C#*

     public int Size {get; set;}

*Implements*

IDbDataParameter.Size

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameter-sourcecolumn,  Next: connector-net-ref-mysqlclient-mysqlparameter-sourceversion,  Prev: connector-net-ref-mysqlclient-mysqlparameter-size,  Up: connector-net-ref-mysqlclient-mysqlparametermembers

22.2.9.83 SourceColumn Property
...............................

Gets or sets the name of the source column that is mapped to the
DataSetand used for loading or returning the *Note Value:
connector-net-ref-mysqlclient-mysqlparameter-value.

*Syntax: Visual Basic*

     NotOverridable Public Property SourceColumn As String _
     _
       Implements IDataParameter.SourceColumn

*Syntax: C#*

     public string SourceColumn {get; set;}

*Implements*

IDataParameter.SourceColumn

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameter-sourceversion,  Next: connector-net-ref-mysqlclient-mysqlparameter-tostring,  Prev: connector-net-ref-mysqlclient-mysqlparameter-sourcecolumn,  Up: connector-net-ref-mysqlclient-mysqlparametermembers

22.2.9.84 SourceVersion Property
................................

Gets or sets the DataRowVersion to use when loading *Note Value:
connector-net-ref-mysqlclient-mysqlparameter-value.

*Syntax: Visual Basic*

     NotOverridable Public Property SourceVersion As DataRowVersion _
     _
       Implements IDataParameter.SourceVersion

*Syntax: C#*

     public System.Data.DataRowVersion SourceVersion {get; set;}

*Implements*

IDataParameter.SourceVersion

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparameter-tostring,  Prev: connector-net-ref-mysqlclient-mysqlparameter-sourceversion,  Up: connector-net-ref-mysqlclient-mysqlparametermembers

22.2.9.85 `MySqlParameter.ToString' Method
..........................................

Overridden. Gets a string containing the *Note ParameterName:
connector-net-ref-mysqlclient-mysqlparameter-parametername.

*Syntax: Visual Basic*

     Overrides Public Function ToString() As String

*Syntax: C#*

     public override string ToString();

*Return Value*

*See Also*

*Note MySqlParameter Class:
connector-net-ref-mysqlclient-mysqlparameter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-item1,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-item2,  Prev: connector-net-ref-mysqlclient-mysqlparameter,  Up: connector-net-ref-mysqlclient-mysqlparametercollectionitem

22.2.9.86 Item Property (Int32)
...............................

Gets the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  at the specified index.

*Syntax: Visual Basic*

     Overloads Public Default Property Item( _
        ByVal index As Integer _
     ) As MySqlParameter

*Syntax: C#*

     public MySqlParameter this[
     intindex
     ] {get; set;}

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameterCollection.Item Overload List:
connector-net-ref-mysqlclient-mysqlparametercollectionitem.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-item2,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-item1,  Up: connector-net-ref-mysqlclient-mysqlparametercollectionitem

22.2.9.87 Item Property (String)
................................

Gets the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  with the specified name.

*Syntax: Visual Basic*

     Overloads Public Default Property Item( _
        ByVal name As String _
     ) As MySqlParameter

*Syntax: C#*

     public MySqlParameter this[
     stringname
     ] {get; set;}

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameterCollection.Item Overload List:
connector-net-ref-mysqlclient-mysqlparametercollectionitem.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-clear,  Prev: connector-net-ref-mysqlclient-mysqlparametercollectionitem,  Up: connector-net-ref-mysqlclient-mysqlparametercollectionmembers

22.2.9.88 Add Method
....................

* Menu:

* connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-2::  `MySqlParameterCollection.Add' Method
* connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-1::  `MySqlParameterCollection.Add' Method
* connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-4::  `MySqlParameterCollection.Add' Method
* connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-5::  `MySqlParameterCollection.Add' Method
* connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-6::  `MySqlParameterCollection.Add' Method
* connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-3::  `MySqlParameterCollection.Add' Method

Adds the specified *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  object to the *Note
MySqlParameterCollection:
connector-net-ref-mysqlclient-mysqlparametercollection.

*Overload List*

Adds the specified *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  object to the *Note
MySqlParameterCollection:
connector-net-ref-mysqlclient-mysqlparametercollection.

   * *Note public MySqlParameter Add(MySqlParameter);:
     connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-2.

Adds the specified *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  object to the *Note
MySqlParameterCollection:
connector-net-ref-mysqlclient-mysqlparametercollection.

   * *Note public int Add(object);:
     connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-1.

Adds a *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  to the *Note
MySqlParameterCollection:
connector-net-ref-mysqlclient-mysqlparametercollection.  given the
parameter name and the data type.

   * *Note public MySqlParameter Add(string:
     (MySqlDbType);)connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-4.

Adds a *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  to the *Note
MySqlParameterCollection:
connector-net-ref-mysqlclient-mysqlparametercollection.  with the
parameter name, the data type, and the column length.

   * *Note public MySqlParameter Add(string:
     (MySqlDbType)connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-5.

Adds a *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  to the *Note
MySqlParameterCollection:
connector-net-ref-mysqlclient-mysqlparametercollection.  with the
parameter name, the data type, the column length, and the source column
name.

   * *Note public MySqlParameter Add(string:
     (MySqlDbType)connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-6.string);

Adds a *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  to the *Note
MySqlParameterCollection:
connector-net-ref-mysqlclient-mysqlparametercollection.  given the
specified parameter name and value.

   * *Note public MySqlParameter Add(string:
     (object);)connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-3.

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-2,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-1,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads,  Up: connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads

22.2.9.89 `MySqlParameterCollection.Add' Method
...............................................

Adds the specified *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  object to the *Note
MySqlParameterCollection:
connector-net-ref-mysqlclient-mysqlparametercollection.

*Syntax: Visual Basic*

     Overloads Public Function Add( _
        ByVal value As MySqlParameter _
     ) As MySqlParameter

*Syntax: C#*

     public MySqlParameter Add(
     MySqlParametervalue
     );

*Parameters*

   * `value': The *Note MySqlParameter:
     connector-net-ref-mysqlclient-mysqlparameter.  to add to the
     collection.

*Return Value*

The newly added *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  object.

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameterCollection.Add Overload List:
connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-1,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-4,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-2,  Up: connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads

22.2.9.90 `MySqlParameterCollection.Add' Method
...............................................

Adds the specified *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  object to the *Note
MySqlParameterCollection:
connector-net-ref-mysqlclient-mysqlparametercollection.

*Syntax: Visual Basic*

     NotOverridable Overloads Public Function Add( _
        ByVal value As Object _
     ) As Integer _
     _
       Implements IList.Add

*Syntax: C#*

     public int Add(
     objectvalue
     );

*Parameters*

   * `value': The *Note MySqlParameter:
     connector-net-ref-mysqlclient-mysqlparameter.  to add to the
     collection.

*Return Value*

The index of the new *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  object.

*Implements*

IList.Add

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameterCollection.Add Overload List:
connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-4,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-5,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-1,  Up: connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads

22.2.9.91 `MySqlParameterCollection.Add' Method
...............................................

Adds a *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  to the *Note
MySqlParameterCollection:
connector-net-ref-mysqlclient-mysqlparametercollection.  given the
parameter name and the data type.

*Syntax: Visual Basic*

     Overloads Public Function Add( _
        ByVal parameterName As String, _
        ByVal dbType As MySqlDbType _
     ) As MySqlParameter

*Syntax: C#*

     public MySqlParameter Add(
     stringparameterName,
     MySqlDbTypedbType
     );

*Parameters*

   * `parameterName': The name of the parameter.

   * `dbType': One of the *Note MySqlDbType:
     connector-net-ref-mysqlclient-mysqldbtype.  values.

*Return Value*

The newly added *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  object.

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameterCollection.Add Overload List:
connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-5,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-6,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-4,  Up: connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads

22.2.9.92 `MySqlParameterCollection.Add' Method
...............................................

Adds a *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  to the *Note
MySqlParameterCollection:
connector-net-ref-mysqlclient-mysqlparametercollection.  with the
parameter name, the data type, and the column length.

*Syntax: Visual Basic*

     Overloads Public Function Add( _
        ByVal parameterName As String, _
        ByVal dbType As MySqlDbType, _
        ByVal size As Integer _
     ) As MySqlParameter

*Syntax: C#*

     public MySqlParameter Add(
     stringparameterName,
     MySqlDbTypedbType,
     intsize
     );

*Parameters*

   * `parameterName': The name of the parameter.

   * `dbType': One of the *Note MySqlDbType:
     connector-net-ref-mysqlclient-mysqldbtype.  values.

   * `size': The length of the column.

*Return Value*

The newly added *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  object.

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameterCollection.Add Overload List:
connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-6,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-3,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-5,  Up: connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads

22.2.9.93 `MySqlParameterCollection.Add' Method
...............................................

Adds a *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  to the *Note
MySqlParameterCollection:
connector-net-ref-mysqlclient-mysqlparametercollection.  with the
parameter name, the data type, the column length, and the source column
name.

*Syntax: Visual Basic*

     Overloads Public Function Add( _
        ByVal parameterName As String, _
        ByVal dbType As MySqlDbType, _
        ByVal size As Integer, _
        ByVal sourceColumn As String _
     ) As MySqlParameter

*Syntax: C#*

     public MySqlParameter Add(
     stringparameterName,
     MySqlDbTypedbType,
     intsize,
     stringsourceColumn
     );

*Parameters*

   * `parameterName': The name of the parameter.

   * `dbType': One of the *Note MySqlDbType:
     connector-net-ref-mysqlclient-mysqldbtype.  values.

   * `size': The length of the column.

   * `sourceColumn': The name of the source column.

*Return Value*

The newly added *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  object.

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameterCollection.Add Overload List:
connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-3,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-6,  Up: connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads

22.2.9.94 `MySqlParameterCollection.Add' Method
...............................................

Adds a *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  to the *Note
MySqlParameterCollection:
connector-net-ref-mysqlclient-mysqlparametercollection.  given the
specified parameter name and value.

*Syntax: Visual Basic*

     Overloads Public Function Add( _
        ByVal parameterName As String, _
        ByVal value As Object _
     ) As MySqlParameter

*Syntax: C#*

     public MySqlParameter Add(
     stringparameterName,
     objectvalue
     );

*Parameters*

   * `parameterName': The name of the parameter.

   * `value': The *Note Value:
     connector-net-ref-mysqlclient-mysqlparameter-value.  of the *Note
     MySqlParameter: connector-net-ref-mysqlclient-mysqlparameter.  to
     add to the collection.

*Return Value*

The newly added *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  object.

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameterCollection.Add Overload List:
connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-clear,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-contains-overloads,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads,  Up: connector-net-ref-mysqlclient-mysqlparametercollectionmembers

22.2.9.95 `MySqlParameterCollection.Clear' Method
.................................................

Removes all items from the collection.

*Syntax: Visual Basic*

     NotOverridable Public Sub Clear() _
     _
       Implements IList.Clear

*Syntax: C#*

     public void Clear();

*Implements*

IList.Clear

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-contains-overloads,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-copyto,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-clear,  Up: connector-net-ref-mysqlclient-mysqlparametercollectionmembers

22.2.9.96 Contains Method
.........................

* Menu:

* connector-net-ref-mysqlclient-mysqlparametercollection-contains-overload-1::  `MySqlParameterCollection.Contains' Method
* connector-net-ref-mysqlclient-mysqlparametercollection-contains-overload-2::  `MySqlParameterCollection.Contains' Method

Gets a value indicating whether a *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  exists in the collection.

*Overload List*

Gets a value indicating whether a MySqlParameter exists in the
collection.

   * *Note public bool Contains(object);:
     connector-net-ref-mysqlclient-mysqlparametercollection-contains-overload-1.

Gets a value indicating whether a *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  with the specified
parameter name exists in the collection.

   * *Note public bool Contains(string);:
     connector-net-ref-mysqlclient-mysqlparametercollection-contains-overload-2.

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-contains-overload-1,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-contains-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-contains-overloads,  Up: connector-net-ref-mysqlclient-mysqlparametercollection-contains-overloads

22.2.9.97 `MySqlParameterCollection.Contains' Method
....................................................

Gets a value indicating whether a MySqlParameter exists in the
collection.

*Syntax: Visual Basic*

     NotOverridable Overloads Public Function Contains( _
        ByVal value As Object _
     ) As Boolean _
     _
       Implements IList.Contains

*Syntax: C#*

     public bool Contains(
     objectvalue
     );

*Parameters*

   * `value': The value of the *Note MySqlParameter:
     connector-net-ref-mysqlclient-mysqlparameter.  object to find.

*Return Value*

true if the collection contains the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  object; otherwise, false.

*Implements*

IList.Contains

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameterCollection.Contains Overload List:
connector-net-ref-mysqlclient-mysqlparametercollection-contains-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-contains-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-contains-overload-1,  Up: connector-net-ref-mysqlclient-mysqlparametercollection-contains-overloads

22.2.9.98 `MySqlParameterCollection.Contains' Method
....................................................

Gets a value indicating whether a *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  with the specified
parameter name exists in the collection.

*Syntax: Visual Basic*

     NotOverridable Overloads Public Function Contains( _
        ByVal name As String _
     ) As Boolean _
     _
       Implements IDataParameterCollection.Contains

*Syntax: C#*

     public bool Contains(
     stringname
     );

*Parameters*

   * `name': The name of the *Note MySqlParameter:
     connector-net-ref-mysqlclient-mysqlparameter.  object to find.

*Return Value*

true if the collection contains the parameter; otherwise, false.

*Implements*

IDataParameterCollection.Contains

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameterCollection.Contains Overload List:
connector-net-ref-mysqlclient-mysqlparametercollection-contains-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-copyto,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overloads,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-contains-overloads,  Up: connector-net-ref-mysqlclient-mysqlparametercollectionmembers

22.2.9.99 `MySqlParameterCollection.CopyTo' Method
..................................................

Copies MySqlParameter objects from the MySqlParameterCollection to the
specified array.

*Syntax: Visual Basic*

     NotOverridable Public Sub CopyTo( _
        ByVal array As Array, _
        ByVal index As Integer _
     ) _
     _
       Implements ICollection.CopyTo

*Syntax: C#*

     public void CopyTo(
     Arrayarray,
     intindex
     );

*Parameters*

   * `array':

   * `index':

*Implements*

ICollection.CopyTo

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overloads,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-insert,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-copyto,  Up: connector-net-ref-mysqlclient-mysqlparametercollectionmembers

22.2.9.100 IndexOf Method
.........................

* Menu:

* connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overload-1::  `MySqlParameterCollection.IndexOf' Method
* connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overload-2::  `MySqlParameterCollection.IndexOf' Method

Gets the location of a *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  in the collection.

*Overload List*

Gets the location of a *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  in the collection.

   * *Note public int IndexOf(object);:
     connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overload-1.

Gets the location of the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  in the collection with a
specific parameter name.

   * *Note public int IndexOf(string);:
     connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overload-2.

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overload-1,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overloads,  Up: connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overloads

22.2.9.101 `MySqlParameterCollection.IndexOf' Method
....................................................

Gets the location of a *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  in the collection.

*Syntax: Visual Basic*

     NotOverridable Overloads Public Function IndexOf( _
        ByVal value As Object _
     ) As Integer _
     _
       Implements IList.IndexOf

*Syntax: C#*

     public int IndexOf(
     objectvalue
     );

*Parameters*

   * `value': The *Note MySqlParameter:
     connector-net-ref-mysqlclient-mysqlparameter.  object to locate.

*Return Value*

The zero-based location of the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  in the collection.

*Implements*

IList.IndexOf

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameterCollection.IndexOf Overload List:
connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overload-1,  Up: connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overloads

22.2.9.102 `MySqlParameterCollection.IndexOf' Method
....................................................

Gets the location of the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  in the collection with a
specific parameter name.

*Syntax: Visual Basic*

     NotOverridable Overloads Public Function IndexOf( _
        ByVal parameterName As String _
     ) As Integer _
     _
       Implements IDataParameterCollection.IndexOf

*Syntax: C#*

     public int IndexOf(
     stringparameterName
     );

*Parameters*

   * `parameterName': The name of the *Note MySqlParameter:
     connector-net-ref-mysqlclient-mysqlparameter.  object to retrieve.

*Return Value*

The zero-based location of the *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  in the collection.

*Implements*

IDataParameterCollection.IndexOf

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameterCollection.IndexOf Overload List:
connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-insert,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-remove,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overloads,  Up: connector-net-ref-mysqlclient-mysqlparametercollectionmembers

22.2.9.103 `MySqlParameterCollection.Insert' Method
...................................................

Inserts a MySqlParameter into the collection at the specified index.

*Syntax: Visual Basic*

     NotOverridable Public Sub Insert( _
        ByVal index As Integer, _
        ByVal value As Object _
     ) _
     _
       Implements IList.Insert

*Syntax: C#*

     public void Insert(
     intindex,
     objectvalue
     );

*Parameters*

   * `index':

   * `value':

*Implements*

IList.Insert

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-remove,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overloads,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-insert,  Up: connector-net-ref-mysqlclient-mysqlparametercollectionmembers

22.2.9.104 `MySqlParameterCollection.Remove' Method
...................................................

Removes the specified MySqlParameter from the collection.

*Syntax: Visual Basic*

     NotOverridable Public Sub Remove( _
        ByVal value As Object _
     ) _
     _
       Implements IList.Remove

*Syntax: C#*

     public void Remove(
     objectvalue
     );

*Parameters*

   * `value':

*Implements*

IList.Remove

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overloads,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-remove,  Up: connector-net-ref-mysqlclient-mysqlparametercollectionmembers

22.2.9.105 RemoveAt Method
..........................

* Menu:

* connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overload-1::  `MySqlParameterCollection.RemoveAt' Method
* connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overload-2::  `MySqlParameterCollection.RemoveAt' Method

Removes the specified *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  from the collection.

*Overload List*

Removes the specified *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  from the collection
using a specific index.

   * *Note public void RemoveAt(int);:
     connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overload-1.

Removes the specified *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  from the collection
using the parameter name.

   * *Note public void RemoveAt(string);:
     connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overload-2.

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overload-1,  Next: connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overloads,  Up: connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overloads

22.2.9.106 `MySqlParameterCollection.RemoveAt' Method
.....................................................

Removes the specified *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  from the collection
using a specific index.

*Syntax: Visual Basic*

     NotOverridable Overloads Public Sub RemoveAt( _
        ByVal index As Integer _
     ) _
     _
       Implements IList.RemoveAt

*Syntax: C#*

     public void RemoveAt(
     intindex
     );

*Parameters*

   * `index': The zero-based index of the parameter.

*Implements*

IList.RemoveAt

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameterCollection.RemoveAt Overload List:
connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overload-1,  Up: connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overloads

22.2.9.107 `MySqlParameterCollection.RemoveAt' Method
.....................................................

Removes the specified *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  from the collection
using the parameter name.

*Syntax: Visual Basic*

     NotOverridable Overloads Public Sub RemoveAt( _
        ByVal name As String _
     ) _
     _
       Implements IDataParameterCollection.RemoveAt

*Syntax: C#*

     public void RemoveAt(
     stringname
     );

*Parameters*

   * `name': The name of the *Note MySqlParameter:
     connector-net-ref-mysqlclient-mysqlparameter.  object to retrieve.

*Implements*

IDataParameterCollection.RemoveAt

*See Also*

*Note MySqlParameterCollection Class:
connector-net-ref-mysqlclient-mysqlparametercollection, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlParameterCollection.RemoveAt Overload List:
connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommand-transaction,  Next: connector-net-ref-mysqlclient-mysqlcommand-updatedrowsource,  Prev: connector-net-ref-mysqlclient-mysqlcommand-parameters,  Up: connector-net-ref-mysqlclient-mysqlcommandmembers

22.2.9.108 Transaction Property
...............................

*Syntax: Visual Basic*

     Public Property Transaction As MySqlTransaction

*Syntax: C#*

     public MySqlTransaction Transaction {get; set;}

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommand-updatedrowsource,  Next: connector-net-ref-mysqlclient-mysqlcommand-cancel,  Prev: connector-net-ref-mysqlclient-mysqlcommand-transaction,  Up: connector-net-ref-mysqlclient-mysqlcommandmembers

22.2.9.109 UpdatedRowSource Property
....................................

*Syntax: Visual Basic*

     NotOverridable Public Property UpdatedRowSource As UpdateRowSource _
     _
       Implements IDbCommand.UpdatedRowSource

*Syntax: C#*

     public System.Data.UpdateRowSource UpdatedRowSource {get; set;}

*Implements*

IDbCommand.UpdatedRowSource

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommand-cancel,  Next: connector-net-ref-mysqlclient-mysqlcommand-createparameter,  Prev: connector-net-ref-mysqlclient-mysqlcommand-updatedrowsource,  Up: connector-net-ref-mysqlclient-mysqlcommandmembers

22.2.9.110 `MySqlCommand.Cancel' Method
.......................................

Attempts to cancel the execution of a MySqlCommand. This operation is
not supported.

*Syntax: Visual Basic*

     NotOverridable Public Sub Cancel() _
     _
       Implements IDbCommand.Cancel

*Syntax: C#*

     public void Cancel();

*Implements*

IDbCommand.Cancel

*Remarks*

Cancelling an executing command is currently not supported on any
version of MySQL.

*Exceptions*

Exceptions in the MySqlCommand.Cancel method.

*Exception Type*                     *Condition*
NotSupportedException                This operation is not supported.

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommand-createparameter,  Next: connector-net-ref-mysqlclient-mysqlcommand-executenonquery,  Prev: connector-net-ref-mysqlclient-mysqlcommand-cancel,  Up: connector-net-ref-mysqlclient-mysqlcommandmembers

22.2.9.111 `MySqlCommand.CreateParameter' Method
................................................

Creates a new instance of a *Note MySqlParameter:
connector-net-ref-mysqlclient-mysqlparameter.  object.

*Syntax: Visual Basic*

     Public Function CreateParameter() As MySqlParameter

*Syntax: C#*

     public MySqlParameter CreateParameter();

*Return Value*

A *Note MySqlParameter: connector-net-ref-mysqlclient-mysqlparameter.
object.

*Remarks*

This method is a strongly-typed version of CreateParameter.

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommand-executenonquery,  Next: connector-net-ref-mysqlclient-mysqlcommand-executereader-overloads,  Prev: connector-net-ref-mysqlclient-mysqlcommand-createparameter,  Up: connector-net-ref-mysqlclient-mysqlcommandmembers

22.2.9.112 `MySqlCommand.ExecuteNonQuery' Method
................................................

*Syntax: Visual Basic*

     NotOverridable Public Function ExecuteNonQuery() As Integer _
     _
       Implements IDbCommand.ExecuteNonQuery

*Syntax: C#*

     public int ExecuteNonQuery();

*Implements*

IDbCommand.ExecuteNonQuery

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommand-executereader-overloads,  Next: connector-net-ref-mysqlclient-mysqlcommand-executescalar,  Prev: connector-net-ref-mysqlclient-mysqlcommand-executenonquery,  Up: connector-net-ref-mysqlclient-mysqlcommandmembers

22.2.9.113 ExecuteReader Method
...............................

* Menu:

* connector-net-ref-mysqlclient-mysqlcommand-executereader-overload-1::  `MySqlCommand.ExecuteReader' Method
* connector-net-ref-mysqlclient-mysqlcommand-executereader-overload-2::  `MySqlCommand.ExecuteReader' Method

*Overload List*

   * *Note public MySqlDataReader ExecuteReader();:
     connector-net-ref-mysqlclient-mysqlcommand-executereader-overload-1.

   * *Note public MySqlDataReader ExecuteReader(CommandBehavior);:
     connector-net-ref-mysqlclient-mysqlcommand-executereader-overload-2.

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommand-executereader-overload-1,  Next: connector-net-ref-mysqlclient-mysqlcommand-executereader-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlcommand-executereader-overloads,  Up: connector-net-ref-mysqlclient-mysqlcommand-executereader-overloads

22.2.9.114 `MySqlCommand.ExecuteReader' Method
..............................................

* Menu:

* connector-net-ref-mysqlclient-mysqldatareader::  `MySqlDataReader' Class

*Syntax: Visual Basic*

     Overloads Public Function ExecuteReader() As MySqlDataReader

*Syntax: C#*

     public MySqlDataReader ExecuteReader();

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient,
*Note MySqlCommand.ExecuteReader Overload List:
connector-net-ref-mysqlclient-mysqlcommand-executereader-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader,  Prev: connector-net-ref-mysqlclient-mysqlcommand-executereader-overload-1,  Up: connector-net-ref-mysqlclient-mysqlcommand-executereader-overload-1

22.2.9.115 `MySqlDataReader' Class
..................................

* Menu:

* connector-net-ref-mysqlclient-mysqldatareadermembers::  `MySqlDataReader' Members

Provides a means of reading a forward-only stream of rows from a MySQL
database. This class cannot be inherited.

For a list of all members of this type, see *Note MySqlDataReader
Members: connector-net-ref-mysqlclient-mysqldatareadermembers .

*Syntax: Visual Basic*

     NotInheritable Public Class MySqlDataReader_
       Inherits MarshalByRefObject_
       Implements IEnumerable, IDataReader, IDisposable, IDataRecord

*Syntax: C#*

     public sealed class MySqlDataReader : MarshalByRefObject, IEnumerable, IDataReader, IDisposable, IDataRecord

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySqlDataReader Members:
connector-net-ref-mysqlclient-mysqldatareadermembers, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareadermembers,  Prev: connector-net-ref-mysqlclient-mysqldatareader,  Up: connector-net-ref-mysqlclient-mysqldatareader

22.2.9.116 `MySqlDataReader' Members
....................................

* Menu:

* connector-net-ref-mysqlclient-mysqldatareader-depth::  Depth Property
* connector-net-ref-mysqlclient-mysqldatareader-fieldcount::  FieldCount Property
* connector-net-ref-mysqlclient-mysqldatareader-hasrows::  HasRows Property
* connector-net-ref-mysqlclient-mysqldatareader-isclosed::  IsClosed Property
* connector-net-ref-mysqlclient-mysqldatareaderitem::  Item Property
* connector-net-ref-mysqlclient-mysqldatareader-recordsaffected::  RecordsAffected Property
* connector-net-ref-mysqlclient-mysqldatareader-close::  `MySqlDataReader.Close' Method
* connector-net-ref-mysqlclient-mysqldatareader-getboolean::  `MySqlDataReader.GetBoolean' Method
* connector-net-ref-mysqlclient-mysqldatareader-getbyte::  `MySqlDataReader.GetByte' Method
* connector-net-ref-mysqlclient-mysqldatareader-getbytes::  `MySqlDataReader.GetBytes' Method
* connector-net-ref-mysqlclient-mysqldatareader-getchar::  `MySqlDataReader.GetChar' Method
* connector-net-ref-mysqlclient-mysqldatareader-getchars::  `MySqlDataReader.GetChars' Method
* connector-net-ref-mysqlclient-mysqldatareader-getdatatypename::  `MySqlDataReader.GetDataTypeName' Method
* connector-net-ref-mysqlclient-mysqldatareader-getdatetime::  `MySqlDataReader.GetDateTime' Method
* connector-net-ref-mysqlclient-mysqldatareader-getdecimal::  `MySqlDataReader.GetDecimal' Method
* connector-net-ref-mysqlclient-mysqldatareader-getdouble::  `MySqlDataReader.GetDouble' Method
* connector-net-ref-mysqlclient-mysqldatareader-getfieldtype::  `MySqlDataReader.GetFieldType' Method
* connector-net-ref-mysqlclient-mysqldatareader-getfloat::  `MySqlDataReader.GetFloat' Method
* connector-net-ref-mysqlclient-mysqldatareader-getguid::  `MySqlDataReader.GetGuid' Method
* connector-net-ref-mysqlclient-mysqldatareader-getint16::  `MySqlDataReader.GetInt16' Method
* connector-net-ref-mysqlclient-mysqldatareader-getint32::  `MySqlDataReader.GetInt32' Method
* connector-net-ref-mysqlclient-mysqldatareader-getint64::  `MySqlDataReader.GetInt64' Method
* connector-net-ref-mysqlclient-mysqldatareader-getmysqldatetime::  `MySqlDataReader.GetMySqlDateTime' Method
* connector-net-ref-mysqlclient-mysqldatareader-getname::  `MySqlDataReader.GetName' Method
* connector-net-ref-mysqlclient-mysqldatareader-getordinal::  `MySqlDataReader.GetOrdinal' Method
* connector-net-ref-mysqlclient-mysqldatareader-getschematable::  `MySqlDataReader.GetSchemaTable' Method
* connector-net-ref-mysqlclient-mysqldatareader-getstring::  `MySqlDataReader.GetString' Method
* connector-net-ref-mysqlclient-mysqldatareader-gettimespan::  `MySqlDataReader.GetTimeSpan' Method
* connector-net-ref-mysqlclient-mysqldatareader-getuint16::  `MySqlDataReader.GetUInt16' Method
* connector-net-ref-mysqlclient-mysqldatareader-getuint32::  `MySqlDataReader.GetUInt32' Method
* connector-net-ref-mysqlclient-mysqldatareader-getuint64::  `MySqlDataReader.GetUInt64' Method
* connector-net-ref-mysqlclient-mysqldatareader-getvalue::  `MySqlDataReader.GetValue' Method
* connector-net-ref-mysqlclient-mysqldatareader-getvalues::  `MySqlDataReader.GetValues' Method
* connector-net-ref-mysqlclient-mysqldatareader-isdbnull::  `MySqlDataReader.IsDBNull' Method
* connector-net-ref-mysqlclient-mysqldatareader-nextresult::  `MySqlDataReader.NextResult' Method
* connector-net-ref-mysqlclient-mysqldatareader-read::  `MySqlDataReader.Read' Method

*Note MySqlDataReader overview:
connector-net-ref-mysqlclient-mysqldatareader.

*Public Instance Properties*

Public instance properties in the MySqlDataReader class.

*Note Depth:                         Gets a value indicating the depth
connector-net-ref-mysqlclient-mysqldatareader-depth.of nesting for the current row. This
                                     method is not supported currently
                                     and always returns 0.
*Note FieldCount:                    Gets the number of columns in the
connector-net-ref-mysqlclient-mysqldatareader-fieldcount.current row.
*Note HasRows:                       Gets a value indicating whether the
connector-net-ref-mysqlclient-mysqldatareader-hasrows.MySqlDataReader contains one or more
                                     rows.
*Note IsClosed:                      Gets a value indicating whether the
connector-net-ref-mysqlclient-mysqldatareader-isclosed.data reader is closed.
*Note Item:                          Overloaded. Overloaded. Gets the
connector-net-ref-mysqlclient-mysqldatareaderitem.value of a column in its native
                                     format.  In C#, this property is
                                     the indexer for the MySqlDataReader
                                     class.
*Note RecordsAffected:               Gets the number of rows changed,
connector-net-ref-mysqlclient-mysqldatareader-recordsaffected.inserted, or deleted by execution of
                                     the SQL statement.

*Public Instance Methods*

Public instance methods in the MySqlDataReader class.

*Note Close:                         Closes the MySqlDataReader object.
connector-net-ref-mysqlclient-mysqldatareader-close.
CreateObjRef (inherited from         Creates an object that contains all
MarshalByRefObject)                  the relevant information required to
                                     generate a proxy used to
                                     communicate with a remote object.
Equals (inherited from Object)       Determines whether the specified
                                     Object is equal to the current
                                     Object.
*Note GetBoolean:                    Gets the value of the specified
connector-net-ref-mysqlclient-mysqldatareader-getboolean.column as a Boolean.
*Note GetByte:                       Gets the value of the specified
connector-net-ref-mysqlclient-mysqldatareader-getbyte.column as a byte.
*Note GetBytes:                      Reads a stream of bytes from the
connector-net-ref-mysqlclient-mysqldatareader-getbytes.specified column offset into the
                                     buffer an array starting at the
                                     given buffer offset.
*Note GetChar:                       Gets the value of the specified
connector-net-ref-mysqlclient-mysqldatareader-getchar.column as a single character.
*Note GetChars:                      Reads a stream of characters from
connector-net-ref-mysqlclient-mysqldatareader-getchars.the specified column offset into the
                                     buffer as an array starting at the
                                     given buffer offset.
*Note GetDataTypeName:               Gets the name of the source data
connector-net-ref-mysqlclient-mysqldatareader-getdatatypename.type.
*Note GetDateTime:                   
connector-net-ref-mysqlclient-mysqldatareader-getdatetime.
*Note GetDecimal:                    
connector-net-ref-mysqlclient-mysqldatareader-getdecimal.
*Note GetDouble:                     
connector-net-ref-mysqlclient-mysqldatareader-getdouble.
*Note GetFieldType:                  Gets the Type that is the data type
connector-net-ref-mysqlclient-mysqldatareader-getfieldtype.of the object.
*Note GetFloat:                      
connector-net-ref-mysqlclient-mysqldatareader-getfloat.
*Note GetGuid:                       
connector-net-ref-mysqlclient-mysqldatareader-getguid.
GetHashCode (inherited from Object)  Serves as a hash function for a
                                     particular type. GetHashCode is
                                     suitable for use in hashing
                                     algorithms and data structures like
                                     a hash table.
*Note GetInt16:                      
connector-net-ref-mysqlclient-mysqldatareader-getint16.
*Note GetInt32:                      
connector-net-ref-mysqlclient-mysqldatareader-getint32.
*Note GetInt64:                      
connector-net-ref-mysqlclient-mysqldatareader-getint64.
GetLifetimeService (inherited from   Retrieves the current lifetime
MarshalByRefObject)                  service object that controls the
                                     lifetime policy for this instance.
*Note GetMySqlDateTime:              
connector-net-ref-mysqlclient-mysqldatareader-getmysqldatetime.
*Note GetName:                       Gets the name of the specified
connector-net-ref-mysqlclient-mysqldatareader-getname.column.
*Note GetOrdinal:                    Gets the column ordinal, given the
connector-net-ref-mysqlclient-mysqldatareader-getordinal.name of the column.
*Note GetSchemaTable:                Returns a DataTable that describes
connector-net-ref-mysqlclient-mysqldatareader-getschematable.the column metadata of the
                                     MySqlDataReader.
*Note GetString:                     
connector-net-ref-mysqlclient-mysqldatareader-getstring.
*Note GetTimeSpan:                   
connector-net-ref-mysqlclient-mysqldatareader-gettimespan.
GetType (inherited from Object)      Gets the Type of the current
                                     instance.
*Note GetUInt16:                     
connector-net-ref-mysqlclient-mysqldatareader-getuint16.
*Note GetUInt32:                     
connector-net-ref-mysqlclient-mysqldatareader-getuint32.
*Note GetUInt64:                     
connector-net-ref-mysqlclient-mysqldatareader-getuint64.
*Note GetValue:                      Gets the value of the specified
connector-net-ref-mysqlclient-mysqldatareader-getvalue.column in its native format.
*Note GetValues:                     Gets all attribute columns in the
connector-net-ref-mysqlclient-mysqldatareader-getvalues.collection for the current row.
InitializeLifetimeService            Obtains a lifetime service object
(inherited from MarshalByRefObject)  to control the lifetime policy for
                                     this instance.
*Note IsDBNull:                      Gets a value indicating whether the
connector-net-ref-mysqlclient-mysqldatareader-isdbnull.column contains non-existent or
                                     missing values.
*Note NextResult:                    Advances the data reader to the
connector-net-ref-mysqlclient-mysqldatareader-nextresult.next result, when reading the
                                     results of batch SQL statements.
*Note Read:                          Advances the MySqlDataReader to the
connector-net-ref-mysqlclient-mysqldatareader-read.next record.
ToString (inherited from Object)     Returns a String that represents
                                     the current Object.

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-depth,  Next: connector-net-ref-mysqlclient-mysqldatareader-fieldcount,  Prev: connector-net-ref-mysqlclient-mysqldatareadermembers,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.117 Depth Property
.........................

Gets a value indicating the depth of nesting for the current row. This
method is not supported currently and always returns 0.

*Syntax: Visual Basic*

     NotOverridable Public ReadOnly Property Depth As Integer _
     _
       Implements IDataReader.Depth

*Syntax: C#*

     public int Depth {get;}

*Implements*

IDataReader.Depth

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-fieldcount,  Next: connector-net-ref-mysqlclient-mysqldatareader-hasrows,  Prev: connector-net-ref-mysqlclient-mysqldatareader-depth,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.118 FieldCount Property
..............................

Gets the number of columns in the current row.

*Syntax: Visual Basic*

     NotOverridable Public ReadOnly Property FieldCount As Integer _
     _
       Implements IDataRecord.FieldCount

*Syntax: C#*

     public int FieldCount {get;}

*Implements*

IDataRecord.FieldCount

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-hasrows,  Next: connector-net-ref-mysqlclient-mysqldatareader-isclosed,  Prev: connector-net-ref-mysqlclient-mysqldatareader-fieldcount,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.119 HasRows Property
...........................

Gets a value indicating whether the MySqlDataReader contains one or
more rows.

*Syntax: Visual Basic*

     Public ReadOnly Property HasRows As Boolean

*Syntax: C#*

     public bool HasRows {get;}

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-isclosed,  Next: connector-net-ref-mysqlclient-mysqldatareaderitem,  Prev: connector-net-ref-mysqlclient-mysqldatareader-hasrows,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.120 IsClosed Property
............................

Gets a value indicating whether the data reader is closed.

*Syntax: Visual Basic*

     NotOverridable Public ReadOnly Property IsClosed As Boolean _
     _
       Implements IDataReader.IsClosed

*Syntax: C#*

     public bool IsClosed {get;}

*Implements*

IDataReader.IsClosed

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareaderitem,  Next: connector-net-ref-mysqlclient-mysqldatareader-recordsaffected,  Prev: connector-net-ref-mysqlclient-mysqldatareader-isclosed,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.121 Item Property
........................

* Menu:

* connector-net-ref-mysqlclient-mysqldatareader-item1::  Item Property (Int32)
* connector-net-ref-mysqlclient-mysqldatareader-item2::  Item Property (String)

Overloaded. Gets the value of a column in its native format. In C#,
this property is the indexer for the MySqlDataReader class.

*Overload List*

Overloaded. Gets the value of a column in its native format. In C#,
this property is the indexer for the MySqlDataReader class.

   * *Note public object this[int] {get;}:
     connector-net-ref-mysqlclient-mysqldatareader-item1.

Gets the value of a column in its native format. In C#, this property
is the indexer for the MySqlDataReader class.

   * *Note public object this[string] {get;}:
     connector-net-ref-mysqlclient-mysqldatareader-item2.

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-item1,  Next: connector-net-ref-mysqlclient-mysqldatareader-item2,  Prev: connector-net-ref-mysqlclient-mysqldatareaderitem,  Up: connector-net-ref-mysqlclient-mysqldatareaderitem

22.2.9.122 Item Property (Int32)
................................

Overloaded. Gets the value of a column in its native format. In C#,
this property is the indexer for the MySqlDataReader class.

*Syntax: Visual Basic*

     NotOverridable Overloads Public Default ReadOnly Property Item( _
        ByVal i As Integer _
     ) _
     _
       Implements IDataRecord.Item As Object _
     _
       Implements IDataRecord.Item

*Syntax: C#*

     public object this[
     inti
     ] {get;}

*Implements*

IDataRecord.Item

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlDataReader.Item Overload List:
connector-net-ref-mysqlclient-mysqldatareaderitem.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-item2,  Prev: connector-net-ref-mysqlclient-mysqldatareader-item1,  Up: connector-net-ref-mysqlclient-mysqldatareaderitem

22.2.9.123 Item Property (String)
.................................

Gets the value of a column in its native format.  In C#, this property
is the indexer for the MySqlDataReader class.

*Syntax: Visual Basic*

     NotOverridable Overloads Public Default ReadOnly Property Item( _
        ByVal name As String _
     ) _
     _
       Implements IDataRecord.Item As Object _
     _
       Implements IDataRecord.Item

*Syntax: C#*

     public object this[
     stringname
     ] {get;}

*Implements*

IDataRecord.Item

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlDataReader.Item Overload List:
connector-net-ref-mysqlclient-mysqldatareaderitem.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-recordsaffected,  Next: connector-net-ref-mysqlclient-mysqldatareader-close,  Prev: connector-net-ref-mysqlclient-mysqldatareaderitem,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.124 RecordsAffected Property
...................................

Gets the number of rows changed, inserted, or deleted by execution of
the SQL statement.

*Syntax: Visual Basic*

     NotOverridable Public ReadOnly Property RecordsAffected As Integer _
     _
       Implements IDataReader.RecordsAffected

*Syntax: C#*

     public int RecordsAffected {get;}

*Implements*

IDataReader.RecordsAffected

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-close,  Next: connector-net-ref-mysqlclient-mysqldatareader-getboolean,  Prev: connector-net-ref-mysqlclient-mysqldatareader-recordsaffected,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.125 `MySqlDataReader.Close' Method
.........................................

Closes the MySqlDataReader object.

*Syntax: Visual Basic*

     NotOverridable Public Sub Close() _
     _
       Implements IDataReader.Close

*Syntax: C#*

     public void Close();

*Implements*

IDataReader.Close

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getboolean,  Next: connector-net-ref-mysqlclient-mysqldatareader-getbyte,  Prev: connector-net-ref-mysqlclient-mysqldatareader-close,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.126 `MySqlDataReader.GetBoolean' Method
..............................................

Gets the value of the specified column as a Boolean.

*Syntax: Visual Basic*

     NotOverridable Public Function GetBoolean( _
        ByVal i As Integer _
     ) As Boolean _
     _
       Implements IDataRecord.GetBoolean

*Syntax: C#*

     public bool GetBoolean(
     inti
     );

*Parameters*

   * `i':

*Return Value*

*Implements*

IDataRecord.GetBoolean

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getbyte,  Next: connector-net-ref-mysqlclient-mysqldatareader-getbytes,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getboolean,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.127 `MySqlDataReader.GetByte' Method
...........................................

Gets the value of the specified column as a byte.

*Syntax: Visual Basic*

     NotOverridable Public Function GetByte( _
        ByVal i As Integer _
     ) As Byte _
     _
       Implements IDataRecord.GetByte

*Syntax: C#*

     public byte GetByte(
     inti
     );

*Parameters*

   * `i':

*Return Value*

*Implements*

IDataRecord.GetByte

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getbytes,  Next: connector-net-ref-mysqlclient-mysqldatareader-getchar,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getbyte,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.128 `MySqlDataReader.GetBytes' Method
............................................

Reads a stream of bytes from the specified column offset into the
buffer an array starting at the given buffer offset.

*Syntax: Visual Basic*

     NotOverridable Public Function GetBytes( _
        ByVal i As Integer, _
        ByVal dataIndex As Long, _
        ByVal buffer As Byte(), _
        ByVal bufferIndex As Integer, _
        ByVal length As Integer _
     ) As Long _
     _
       Implements IDataRecord.GetBytes

*Syntax: C#*

     public long GetBytes(
     inti,
     longdataIndex,
     byte[]buffer,
     intbufferIndex,
     intlength
     );

*Parameters*

   * `i': The zero-based column ordinal.

   * `dataIndex': The index within the field from which to begin the
     read operation.

   * `buffer': The buffer into which to read the stream of bytes.

   * `bufferIndex': The index for buffer to begin the read operation.

   * `length': The maximum length to copy into the buffer.

*Return Value*

The actual number of bytes read.

*Implements*

IDataRecord.GetBytes

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getchar,  Next: connector-net-ref-mysqlclient-mysqldatareader-getchars,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getbytes,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.129 `MySqlDataReader.GetChar' Method
...........................................

Gets the value of the specified column as a single character.

*Syntax: Visual Basic*

     NotOverridable Public Function GetChar( _
        ByVal i As Integer _
     ) As Char _
     _
       Implements IDataRecord.GetChar

*Syntax: C#*

     public char GetChar(
     inti
     );

*Parameters*

   * `i':

*Return Value*

*Implements*

IDataRecord.GetChar

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getchars,  Next: connector-net-ref-mysqlclient-mysqldatareader-getdatatypename,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getchar,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.130 `MySqlDataReader.GetChars' Method
............................................

Reads a stream of characters from the specified column offset into the
buffer as an array starting at the given buffer offset.

*Syntax: Visual Basic*

     NotOverridable Public Function GetChars( _
        ByVal i As Integer, _
        ByVal fieldOffset As Long, _
        ByVal buffer As Char(), _
        ByVal bufferoffset As Integer, _
        ByVal length As Integer _
     ) As Long _
     _
       Implements IDataRecord.GetChars

*Syntax: C#*

     public long GetChars(
     inti,
     longfieldOffset,
     char[]buffer,
     intbufferoffset,
     intlength
     );

*Parameters*

   * `i':

   * `fieldOffset':

   * `buffer':

   * `bufferoffset':

   * `length':

*Return Value*

*Implements*

IDataRecord.GetChars

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getdatatypename,  Next: connector-net-ref-mysqlclient-mysqldatareader-getdatetime,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getchars,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.131 `MySqlDataReader.GetDataTypeName' Method
...................................................

Gets the name of the source data type.

*Syntax: Visual Basic*

     NotOverridable Public Function GetDataTypeName( _
        ByVal i As Integer _
     ) As String _
     _
       Implements IDataRecord.GetDataTypeName

*Syntax: C#*

     public string GetDataTypeName(
     inti
     );

*Parameters*

   * `i':

*Return Value*

*Implements*

IDataRecord.GetDataTypeName

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getdatetime,  Next: connector-net-ref-mysqlclient-mysqldatareader-getdecimal,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getdatatypename,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.132 `MySqlDataReader.GetDateTime' Method
...............................................

*Syntax: Visual Basic*

     NotOverridable Public Function GetDateTime( _
        ByVal index As Integer _
     ) As Date _
     _
       Implements IDataRecord.GetDateTime

*Syntax: C#*

     public DateTime GetDateTime(
     intindex
     );

*Implements*

IDataRecord.GetDateTime

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getdecimal,  Next: connector-net-ref-mysqlclient-mysqldatareader-getdouble,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getdatetime,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.133 `MySqlDataReader.GetDecimal' Method
..............................................

*Syntax: Visual Basic*

     NotOverridable Public Function GetDecimal( _
        ByVal index As Integer _
     ) As Decimal _
     _
       Implements IDataRecord.GetDecimal

*Syntax: C#*

     public decimal GetDecimal(
     intindex
     );

*Implements*

IDataRecord.GetDecimal

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getdouble,  Next: connector-net-ref-mysqlclient-mysqldatareader-getfieldtype,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getdecimal,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.134 `MySqlDataReader.GetDouble' Method
.............................................

*Syntax: Visual Basic*

     NotOverridable Public Function GetDouble( _
        ByVal index As Integer _
     ) As Double _
     _
       Implements IDataRecord.GetDouble

*Syntax: C#*

     public double GetDouble(
     intindex
     );

*Implements*

IDataRecord.GetDouble

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getfieldtype,  Next: connector-net-ref-mysqlclient-mysqldatareader-getfloat,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getdouble,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.135 `MySqlDataReader.GetFieldType' Method
................................................

Gets the Type that is the data type of the object.

*Syntax: Visual Basic*

     NotOverridable Public Function GetFieldType( _
        ByVal i As Integer _
     ) As Type _
     _
       Implements IDataRecord.GetFieldType

*Syntax: C#*

     public Type GetFieldType(
     inti
     );

*Parameters*

   * `i':

*Return Value*

*Implements*

IDataRecord.GetFieldType

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getfloat,  Next: connector-net-ref-mysqlclient-mysqldatareader-getguid,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getfieldtype,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.136 `MySqlDataReader.GetFloat' Method
............................................

*Syntax: Visual Basic*

     NotOverridable Public Function GetFloat( _
        ByVal index As Integer _
     ) As Single _
     _
       Implements IDataRecord.GetFloat

*Syntax: C#*

     public float GetFloat(
     intindex
     );

*Implements*

IDataRecord.GetFloat

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getguid,  Next: connector-net-ref-mysqlclient-mysqldatareader-getint16,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getfloat,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.137 `MySqlDataReader.GetGuid' Method
...........................................

*Syntax: Visual Basic*

     NotOverridable Public Function GetGuid( _
        ByVal index As Integer _
     ) As Guid _
     _
       Implements IDataRecord.GetGuid

*Syntax: C#*

     public Guid GetGuid(
     intindex
     );

*Implements*

IDataRecord.GetGuid

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getint16,  Next: connector-net-ref-mysqlclient-mysqldatareader-getint32,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getguid,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.138 `MySqlDataReader.GetInt16' Method
............................................

*Syntax: Visual Basic*

     NotOverridable Public Function GetInt16( _
        ByVal index As Integer _
     ) As Short _
     _
       Implements IDataRecord.GetInt16

*Syntax: C#*

     public short GetInt16(
     intindex
     );

*Implements*

IDataRecord.GetInt16

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getint32,  Next: connector-net-ref-mysqlclient-mysqldatareader-getint64,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getint16,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.139 `MySqlDataReader.GetInt32' Method
............................................

*Syntax: Visual Basic*

     NotOverridable Public Function GetInt32( _
        ByVal index As Integer _
     ) As Integer _
     _
       Implements IDataRecord.GetInt32

*Syntax: C#*

     public int GetInt32(
     intindex
     );

*Implements*

IDataRecord.GetInt32

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getint64,  Next: connector-net-ref-mysqlclient-mysqldatareader-getmysqldatetime,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getint32,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.140 `MySqlDataReader.GetInt64' Method
............................................

*Syntax: Visual Basic*

     NotOverridable Public Function GetInt64( _
        ByVal index As Integer _
     ) As Long _
     _
       Implements IDataRecord.GetInt64

*Syntax: C#*

     public long GetInt64(
     intindex
     );

*Implements*

IDataRecord.GetInt64

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getmysqldatetime,  Next: connector-net-ref-mysqlclient-mysqldatareader-getname,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getint64,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.141 `MySqlDataReader.GetMySqlDateTime' Method
....................................................

*Syntax: Visual Basic*

     Public Function GetMySqlDateTime( _
        ByVal index As Integer _
     ) As MySqlDateTime

*Syntax: C#*

     public MySqlDateTime GetMySqlDateTime(
     intindex
     );

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getname,  Next: connector-net-ref-mysqlclient-mysqldatareader-getordinal,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getmysqldatetime,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.142 `MySqlDataReader.GetName' Method
...........................................

Gets the name of the specified column.

*Syntax: Visual Basic*

     NotOverridable Public Function GetName( _
        ByVal i As Integer _
     ) As String _
     _
       Implements IDataRecord.GetName

*Syntax: C#*

     public string GetName(
     inti
     );

*Parameters*

   * `i':

*Return Value*

*Implements*

IDataRecord.GetName

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getordinal,  Next: connector-net-ref-mysqlclient-mysqldatareader-getschematable,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getname,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.143 `MySqlDataReader.GetOrdinal' Method
..............................................

Gets the column ordinal, given the name of the column.

*Syntax: Visual Basic*

     NotOverridable Public Function GetOrdinal( _
        ByVal name As String _
     ) As Integer _
     _
       Implements IDataRecord.GetOrdinal

*Syntax: C#*

     public int GetOrdinal(
     stringname
     );

*Parameters*

   * `name':

*Return Value*

*Implements*

IDataRecord.GetOrdinal

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getschematable,  Next: connector-net-ref-mysqlclient-mysqldatareader-getstring,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getordinal,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.144 `MySqlDataReader.GetSchemaTable' Method
..................................................

Returns a DataTable that describes the column metadata of the
MySqlDataReader.

*Syntax: Visual Basic*

     NotOverridable Public Function GetSchemaTable() As DataTable _
     _
       Implements IDataReader.GetSchemaTable

*Syntax: C#*

     public DataTable GetSchemaTable();

*Return Value*

*Implements*

IDataReader.GetSchemaTable

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getstring,  Next: connector-net-ref-mysqlclient-mysqldatareader-gettimespan,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getschematable,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.145 `MySqlDataReader.GetString' Method
.............................................

*Syntax: Visual Basic*

     NotOverridable Public Function GetString( _
        ByVal index As Integer _
     ) As String _
     _
       Implements IDataRecord.GetString

*Syntax: C#*

     public string GetString(
     intindex
     );

*Implements*

IDataRecord.GetString

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-gettimespan,  Next: connector-net-ref-mysqlclient-mysqldatareader-getuint16,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getstring,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.146 `MySqlDataReader.GetTimeSpan' Method
...............................................

*Syntax: Visual Basic*

     Public Function GetTimeSpan( _
        ByVal index As Integer _
     ) As TimeSpan

*Syntax: C#*

     public TimeSpan GetTimeSpan(
     intindex
     );

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getuint16,  Next: connector-net-ref-mysqlclient-mysqldatareader-getuint32,  Prev: connector-net-ref-mysqlclient-mysqldatareader-gettimespan,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.147 `MySqlDataReader.GetUInt16' Method
.............................................

*Syntax: Visual Basic*

     Public Function GetUInt16( _
        ByVal index As Integer _
     ) As UInt16

*Syntax: C#*

     public ushort GetUInt16(
     intindex
     );

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getuint32,  Next: connector-net-ref-mysqlclient-mysqldatareader-getuint64,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getuint16,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.148 `MySqlDataReader.GetUInt32' Method
.............................................

*Syntax: Visual Basic*

     Public Function GetUInt32( _
        ByVal index As Integer _
     ) As UInt32

*Syntax: C#*

     public uint GetUInt32(
     intindex
     );

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getuint64,  Next: connector-net-ref-mysqlclient-mysqldatareader-getvalue,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getuint32,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.149 `MySqlDataReader.GetUInt64' Method
.............................................

*Syntax: Visual Basic*

     Public Function GetUInt64( _
        ByVal index As Integer _
     ) As UInt64

*Syntax: C#*

     public ulong GetUInt64(
     intindex
     );

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getvalue,  Next: connector-net-ref-mysqlclient-mysqldatareader-getvalues,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getuint64,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.150 `MySqlDataReader.GetValue' Method
............................................

Gets the value of the specified column in its native format.

*Syntax: Visual Basic*

     NotOverridable Public Function GetValue( _
        ByVal i As Integer _
     ) As Object _
     _
       Implements IDataRecord.GetValue

*Syntax: C#*

     public object GetValue(
     inti
     );

*Parameters*

   * `i':

*Return Value*

*Implements*

IDataRecord.GetValue

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-getvalues,  Next: connector-net-ref-mysqlclient-mysqldatareader-isdbnull,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getvalue,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.151 `MySqlDataReader.GetValues' Method
.............................................

Gets all attribute columns in the collection for the current row.

*Syntax: Visual Basic*

     NotOverridable Public Function GetValues( _
        ByVal values As Object() _
     ) As Integer _
     _
       Implements IDataRecord.GetValues

*Syntax: C#*

     public int GetValues(
     object[]values
     );

*Parameters*

   * `values':

*Return Value*

*Implements*

IDataRecord.GetValues

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-isdbnull,  Next: connector-net-ref-mysqlclient-mysqldatareader-nextresult,  Prev: connector-net-ref-mysqlclient-mysqldatareader-getvalues,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.152 `MySqlDataReader.IsDBNull' Method
............................................

Gets a value indicating whether the column contains non-existent or
missing values.

*Syntax: Visual Basic*

     NotOverridable Public Function IsDBNull( _
        ByVal i As Integer _
     ) As Boolean _
     _
       Implements IDataRecord.IsDBNull

*Syntax: C#*

     public bool IsDBNull(
     inti
     );

*Parameters*

   * `i':

*Return Value*

*Implements*

IDataRecord.IsDBNull

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-nextresult,  Next: connector-net-ref-mysqlclient-mysqldatareader-read,  Prev: connector-net-ref-mysqlclient-mysqldatareader-isdbnull,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.153 `MySqlDataReader.NextResult' Method
..............................................

Advances the data reader to the next result, when reading the results
of batch SQL statements.

*Syntax: Visual Basic*

     NotOverridable Public Function NextResult() As Boolean _
     _
       Implements IDataReader.NextResult

*Syntax: C#*

     public bool NextResult();

*Return Value*

*Implements*

IDataReader.NextResult

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldatareader-read,  Prev: connector-net-ref-mysqlclient-mysqldatareader-nextresult,  Up: connector-net-ref-mysqlclient-mysqldatareadermembers

22.2.9.154 `MySqlDataReader.Read' Method
........................................

Advances the MySqlDataReader to the next record.

*Syntax: Visual Basic*

     NotOverridable Public Function Read() As Boolean _
     _
       Implements IDataReader.Read

*Syntax: C#*

     public bool Read();

*Return Value*

*Implements*

IDataReader.Read

*See Also*

*Note MySqlDataReader Class:
connector-net-ref-mysqlclient-mysqldatareader, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommand-executereader-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlcommand-executereader-overload-1,  Up: connector-net-ref-mysqlclient-mysqlcommand-executereader-overloads

22.2.9.155 `MySqlCommand.ExecuteReader' Method
..............................................

*Syntax: Visual Basic*

     Overloads Public Function ExecuteReader( _
        ByVal behavior As CommandBehavior _
     ) As MySqlDataReader

*Syntax: C#*

     public MySqlDataReader ExecuteReader(
     CommandBehaviorbehavior
     );

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient,
*Note MySqlCommand.ExecuteReader Overload List:
connector-net-ref-mysqlclient-mysqlcommand-executereader-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommand-executescalar,  Next: connector-net-ref-mysqlclient-mysqlcommand-prepare,  Prev: connector-net-ref-mysqlclient-mysqlcommand-executereader-overloads,  Up: connector-net-ref-mysqlclient-mysqlcommandmembers

22.2.9.156 `MySqlCommand.ExecuteScalar' Method
..............................................

*Syntax: Visual Basic*

     NotOverridable Public Function ExecuteScalar() As Object _
     _
       Implements IDbCommand.ExecuteScalar

*Syntax: C#*

     public object ExecuteScalar();

*Implements*

IDbCommand.ExecuteScalar

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommand-prepare,  Prev: connector-net-ref-mysqlclient-mysqlcommand-executescalar,  Up: connector-net-ref-mysqlclient-mysqlcommandmembers

22.2.9.157 `MySqlCommand.Prepare' Method
........................................

*Syntax: Visual Basic*

     NotOverridable Public Sub Prepare() _
     _
       Implements IDbCommand.Prepare

*Syntax: C#*

     public void Prepare();

*Implements*

IDbCommand.Prepare

*See Also*

*Note MySqlCommand Class: connector-net-ref-mysqlclient-mysqlcommand,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandbuilder,  Next: connector-net-ref-mysqlclient-mysqlexception,  Prev: connector-net-ref-mysqlclient-mysqlcommand,  Up: connector-net-ref-mysqlclient

22.2.9.158 `MySqlCommandBuilder' Class
......................................

* Menu:

* connector-net-ref-mysqlclient-mysqlcommandbuildermembers::  `MySqlCommandBuilder' Members

For a list of all members of this type, see *Note MySqlCommandBuilder
Members: connector-net-ref-mysqlclient-mysqlcommandbuildermembers .

*Syntax: Visual Basic*

     NotInheritable Public Class MySqlCommandBuilder_
       Inherits Component

*Syntax: C#*

     public sealed class MySqlCommandBuilder : Component

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySqlCommandBuilder Members:
connector-net-ref-mysqlclient-mysqlcommandbuildermembers, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandbuildermembers,  Prev: connector-net-ref-mysqlclient-mysqlcommandbuilder,  Up: connector-net-ref-mysqlclient-mysqlcommandbuilder

22.2.9.159 `MySqlCommandBuilder' Members
........................................

* Menu:

* connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overloads::  DeriveParameters Method
* connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor::  `MySqlCommandBuilder' Constructor
* connector-net-ref-mysqlclient-mysqlcommandbuilder-dataadapter::  DataAdapter Property
* connector-net-ref-mysqlclient-mysqlcommandbuilder-quoteprefix::  QuotePrefix Property
* connector-net-ref-mysqlclient-mysqlcommandbuilder-quotesuffix::  QuoteSuffix Property
* connector-net-ref-mysqlclient-mysqlcommandbuilder-getdeletecommand::  `MySqlCommandBuilder.GetDeleteCommand' Method
* connector-net-ref-mysqlclient-mysqlcommandbuilder-getinsertcommand::  `MySqlCommandBuilder.GetInsertCommand' Method
* connector-net-ref-mysqlclient-mysqlcommandbuilder-getupdatecommand::  `MySqlCommandBuilder.GetUpdateCommand' Method
* connector-net-ref-mysqlclient-mysqlcommandbuilder-refreshschema::  `MySqlCommandBuilder.RefreshSchema' Method

*Note MySqlCommandBuilder overview:
connector-net-ref-mysqlclient-mysqlcommandbuilder.

*Public Static (Shared) Methods*

Public static (shared) methods in the MySqlCommandBuilder class.

*Note DeriveParameters:              Overloaded. Retrieves parameter
connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overloads.information from the stored
                                     procedure specified in the
                                     MySqlCommand and populates the
                                     Parameters collection of the
                                     specified MySqlCommand object. This
                                     method is not currently supported
                                     since stored procedures are not
                                     available in MySql.

*Public Instance Constructors*

Public instance constructors in the MySqlCommandBuilder class.

*Note MySqlCommandBuilder:           Overloaded. Initializes a new
connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor.instance of the MySqlCommandBuilder
                                     class.

*Public Instance Properties*

Public instance properties in the MySqlCommandBuilder class.

Container (inherited from Component) Gets the IContainer that contains
                                     the Component.
*Note DataAdapter:                   
connector-net-ref-mysqlclient-mysqlcommandbuilder-dataadapter.
*Note QuotePrefix:                   
connector-net-ref-mysqlclient-mysqlcommandbuilder-quoteprefix.
*Note QuoteSuffix:                   
connector-net-ref-mysqlclient-mysqlcommandbuilder-quotesuffix.
Site (inherited from Component)      Gets or sets the ISite of the
                                     Component.

*Public Instance Methods*

Public instance methods in the MySqlCommandBuilder class.

CreateObjRef (inherited from         Creates an object that contains all
MarshalByRefObject)                  the relevant information required to
                                     generate a proxy used to
                                     communicate with a remote object.
Dispose (inherited from Component)   Releases all resources used by the
                                     Component.
Equals (inherited from Object)       Determines whether the specified
                                     Object is equal to the current
                                     Object.
*Note GetDeleteCommand:              
connector-net-ref-mysqlclient-mysqlcommandbuilder-getdeletecommand.
GetHashCode (inherited from Object)  Serves as a hash function for a
                                     particular type. GetHashCode is
                                     suitable for use in hashing
                                     algorithms and data structures like
                                     a hash table.
*Note GetInsertCommand:              
connector-net-ref-mysqlclient-mysqlcommandbuilder-getinsertcommand.
GetLifetimeService (inherited from   Retrieves the current lifetime
MarshalByRefObject)                  service object that controls the
                                     lifetime policy for this instance.
GetType (inherited from Object)      Gets the Type of the current
                                     instance.
*Note GetUpdateCommand:              
connector-net-ref-mysqlclient-mysqlcommandbuilder-getupdatecommand.
InitializeLifetimeService            Obtains a lifetime service object
(inherited from MarshalByRefObject)  to control the lifetime policy for
                                     this instance.
*Note RefreshSchema:                 
connector-net-ref-mysqlclient-mysqlcommandbuilder-refreshschema.
ToString (inherited from Component)  Returns a String containing the
                                     name of the Component, if any. This
                                     method should not be overridden.

*Public Instance Events*

Public instance events in the MySqlCommandBuilder class.

Disposed (inherited from Component)  Adds an event handler to listen to
                                     the Disposed event on the component.

*See Also*

*Note MySqlCommandBuilder Class:
connector-net-ref-mysqlclient-mysqlcommandbuilder, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overloads,  Next: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor,  Prev: connector-net-ref-mysqlclient-mysqlcommandbuildermembers,  Up: connector-net-ref-mysqlclient-mysqlcommandbuildermembers

22.2.9.160 DeriveParameters Method
..................................

* Menu:

* connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overload-1::  `MySqlCommandBuilder.DeriveParameters' Method
* connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overload-2::  `MySqlCommandBuilder.DeriveParameters' Method

Retrieves parameter information from the stored procedure specified in
the MySqlCommand and populates the Parameters collection of the
specified MySqlCommand object. This method is not currently supported
since stored procedures are not available in MySql.

*Overload List*

Retrieves parameter information from the stored procedure specified in
the MySqlCommand and populates the Parameters collection of the
specified MySqlCommand object. This method is not currently supported
since stored procedures are not available in MySql.

   * *Note public static void DeriveParameters(MySqlCommand);:
     connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overload-1.

   * *Note public static void DeriveParameters(MySqlCommand:
     (bool);)connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overload-2.

*See Also*

*Note MySqlCommandBuilder Class:
connector-net-ref-mysqlclient-mysqlcommandbuilder, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overload-1,  Next: connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overloads,  Up: connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overloads

22.2.9.161 `MySqlCommandBuilder.DeriveParameters' Method
........................................................

Retrieves parameter information from the stored procedure specified in
the MySqlCommand and populates the Parameters collection of the
specified MySqlCommand object. This method is not currently supported
since stored procedures are not available in MySql.

*Syntax: Visual Basic*

     Overloads Public Shared Sub DeriveParameters( _
        ByVal command As MySqlCommand _
     )

*Syntax: C#*

     public static void DeriveParameters(
     MySqlCommandcommand
     );

*Parameters*

   * `command': The MySqlCommand referencing the stored procedure from
     which the parameter information is to be derived. The derived
     parameters are added to the Parameters collection of the
     MySqlCommand.

*Exceptions*

Exceptions in the MySqlCommandBuilder.DeriveParameters method.

*Exception Type*                     *Condition*
InvalidOperationException            The command text is not a valid
                                     stored procedure name.

*See Also*

*Note MySqlCommandBuilder Class:
connector-net-ref-mysqlclient-mysqlcommandbuilder, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlCommandBuilder.DeriveParameters Overload List:
connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overload-1,  Up: connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overloads

22.2.9.162 `MySqlCommandBuilder.DeriveParameters' Method
........................................................

*Syntax: Visual Basic*

     Overloads Public Shared Sub DeriveParameters( _
        ByVal command As MySqlCommand, _
        ByVal useProc As Boolean _
     )

*Syntax: C#*

     public static void DeriveParameters(
     MySqlCommandcommand,
     booluseProc
     );

*See Also*

*Note MySqlCommandBuilder Class:
connector-net-ref-mysqlclient-mysqlcommandbuilder, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlCommandBuilder.DeriveParameters Overload List:
connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor,  Next: connector-net-ref-mysqlclient-mysqlcommandbuilder-dataadapter,  Prev: connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overloads,  Up: connector-net-ref-mysqlclient-mysqlcommandbuildermembers

22.2.9.163 `MySqlCommandBuilder' Constructor
............................................

* Menu:

* connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor1::  `MySqlCommandBuilder' Constructor
* connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor3::  `MySqlCommandBuilder' Constructor
* connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor4::  `MySqlCommandBuilder' Constructor
* connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor2::  `MySqlCommandBuilder' Constructor

Initializes a new instance of the *Note MySqlCommandBuilder:
connector-net-ref-mysqlclient-mysqlcommandbuilder.  class.

*Overload List*

Initializes a new instance of the *Note MySqlCommandBuilder:
connector-net-ref-mysqlclient-mysqlcommandbuilder.  class.

   * *Note public MySqlCommandBuilder();:
     connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor1.

   * *Note public MySqlCommandBuilder(MySqlDataAdapter);:
     connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor3.

   * *Note public MySqlCommandBuilder(MySqlDataAdapter:
     (bool);)connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor4.

   * *Note public MySqlCommandBuilder(bool);:
     connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor2.

*See Also*

*Note MySqlCommandBuilder Class:
connector-net-ref-mysqlclient-mysqlcommandbuilder, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor1,  Next: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor3,  Prev: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor,  Up: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor

22.2.9.164 `MySqlCommandBuilder' Constructor
............................................

Initializes a new instance of the *Note MySqlCommandBuilder:
connector-net-ref-mysqlclient-mysqlcommandbuilder.  class.

*Syntax: Visual Basic*

     Overloads Public Sub New()

*Syntax: C#*

     public MySqlCommandBuilder();

*See Also*

*Note MySqlCommandBuilder Class:
connector-net-ref-mysqlclient-mysqlcommandbuilder, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlCommandBuilder Constructor Overload List:
connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor3,  Next: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor4,  Prev: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor1,  Up: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor

22.2.9.165 `MySqlCommandBuilder' Constructor
............................................

* Menu:

* connector-net-ref-mysqlclient-mysqldataadapter::  `MySqlDataAdapter' Class

*Syntax: Visual Basic*

     Overloads Public Sub New( _
        ByVal adapter As MySqlDataAdapter _
     )

*Syntax: C#*

     public MySqlCommandBuilder(
     MySqlDataAdapteradapter
     );

*See Also*

*Note MySqlCommandBuilder Class:
connector-net-ref-mysqlclient-mysqlcommandbuilder, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlCommandBuilder Constructor Overload List:
connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldataadapter,  Prev: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor3,  Up: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor3

22.2.9.166 `MySqlDataAdapter' Class
...................................

* Menu:

* connector-net-ref-mysqlclient-mysqldataadaptermembers::  `MySqlDataAdapter' Members

For a list of all members of this type, see *Note MySqlDataAdapter
Members: connector-net-ref-mysqlclient-mysqldataadaptermembers .

*Syntax: Visual Basic*

     NotInheritable Public Class MySqlDataAdapter_
       Inherits DbDataAdapter

*Syntax: C#*

     public sealed class MySqlDataAdapter : DbDataAdapter

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySqlDataAdapter Members:
connector-net-ref-mysqlclient-mysqldataadaptermembers, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldataadaptermembers,  Prev: connector-net-ref-mysqlclient-mysqldataadapter,  Up: connector-net-ref-mysqlclient-mysqldataadapter

22.2.9.167 `MySqlDataAdapter' Members
.....................................

* Menu:

* connector-net-ref-mysqlclient-mysqldataadapterconstructor::  `MySqlDataAdapter' Constructor
* connector-net-ref-mysqlclient-mysqldataadapter-deletecommand1::  DeleteCommand Property
* connector-net-ref-mysqlclient-mysqldataadapter-insertcommand1::  InsertCommand Property
* connector-net-ref-mysqlclient-mysqldataadapter-selectcommand1::  SelectCommand Property
* connector-net-ref-mysqlclient-mysqldataadapter-updatecommand1::  UpdateCommand Property
* connector-net-ref-mysqlclient-mysqldataadapter-rowupdated::  `MySqlDataAdapter.RowUpdated' Event
* connector-net-ref-mysqlclient-mysqldataadapter-rowupdating::  `MySqlDataAdapter.RowUpdating' Event

*Note MySqlDataAdapter overview:
connector-net-ref-mysqlclient-mysqldataadapter.

*Public Instance Constructors*

Public instance constructors in the MySqlDataAdapter class.

*Note MySqlDataAdapter:              Overloaded. Initializes a new
connector-net-ref-mysqlclient-mysqldataadapterconstructor.instance of the MySqlDataAdapter
                                     class.

*Public Instance Properties*

Public instance properties in the MySqlDataAdapter class.

AcceptChangesDuringFill (inherited   Gets or sets a value indicating
from DataAdapter)                    whether AcceptChangesis called on a
                                     DataRowafter it is added to the
                                     DataTableduring any of the Fill
                                     operations.
AcceptChangesDuringUpdate            Gets or sets whether
(inherited from DataAdapter)         AcceptChangesis called during a
                                     Update.
Container (inherited from Component) Gets the IContainer that contains
                                     the Component.
ContinueUpdateOnError (inherited     Gets or sets a value that specifies
from DataAdapter)                    whether to generate an exception
                                     when an error is encountered during
                                     a row update.
*Note DeleteCommand:                 Overloaded.
connector-net-ref-mysqlclient-mysqldataadapter-deletecommand1.
FillLoadOption (inherited from       Gets or sets the LoadOption that
DataAdapter)                         determines how the adapter fills the
                                     DataTablefrom the DbDataReader.
*Note InsertCommand:                 Overloaded.
connector-net-ref-mysqlclient-mysqldataadapter-insertcommand1.
MissingMappingAction (inherited      Determines the action to take when
from DataAdapter)                    incoming data does not have a
                                     matching table or column.
MissingSchemaAction (inherited from  Determines the action to take when
DataAdapter)                         existing DataSetschema does not
                                     match incoming data.
ReturnProviderSpecificTypes          Gets or sets whether the Fillmethod
(inherited from DataAdapter)         should return provider-specific
                                     values or common CLS-compliant
                                     values.
*Note SelectCommand:                 Overloaded.
connector-net-ref-mysqlclient-mysqldataadapter-selectcommand1.
Site (inherited from Component)      Gets or sets the ISite of the
                                     Component.
TableMappings (inherited from        Gets a collection that provides the
DataAdapter)                         master mapping between a source
                                     table and a DataTable.
UpdateBatchSize (inherited from      Gets or sets a value that enables
DbDataAdapter)                       or disables batch processing
                                     support, and specifies the number
                                     of commands that can be executed in
                                     a batch.
*Note UpdateCommand:                 Overloaded.
connector-net-ref-mysqlclient-mysqldataadapter-updatecommand1.

*Public Instance Methods*

Public instance methods in the MySqlDataAdapter class.

CreateObjRef (inherited from         Creates an object that contains all
MarshalByRefObject)                  the relevant information required to
                                     generate a proxy used to
                                     communicate with a remote object.
Dispose (inherited from Component)   Releases all resources used by the
                                     Component.
Equals (inherited from Object)       Determines whether the specified
                                     Object is equal to the current
                                     Object.
Fill (inherited from DbDataAdapter)  Overloaded. Adds or refreshes rows
                                     in the DataSetto match those in the
                                     data source using the DataSetname,
                                     and creates a DataTablenamed
                                     "Table."
FillSchema (inherited from           Overloaded. Configures the schema
DbDataAdapter)                       of the specified DataTablebased on
                                     the specified SchemaType.
GetFillParameters (inherited from    Gets the parameters set by the user
DbDataAdapter)                       when executing an SQL *Note
                                     `SELECT': select.  statement.
GetHashCode (inherited from Object)  Serves as a hash function for a
                                     particular type. GetHashCode is
                                     suitable for use in hashing
                                     algorithms and data structures like
                                     a hash table.
GetLifetimeService (inherited from   Retrieves the current lifetime
MarshalByRefObject)                  service object that controls the
                                     lifetime policy for this instance.
GetType (inherited from Object)      Gets the Type of the current
                                     instance.
InitializeLifetimeService            Obtains a lifetime service object
(inherited from MarshalByRefObject)  to control the lifetime policy for
                                     this instance.
ResetFillLoadOption (inherited from  Resets FillLoadOptionto its default
DataAdapter)                         state and causes Fillto honor
                                     AcceptChangesDuringFill.
ShouldSerializeAcceptChangesDuringFillDetermines whether the
(inherited from DataAdapter)         AcceptChangesDuringFillproperty
                                     should be persisted.
ShouldSerializeFillLoadOption        Determines whether the
(inherited from DataAdapter)         FillLoadOptionproperty should be
                                     persisted.
ToString (inherited from Component)  Returns a String containing the
                                     name of the Component, if any. This
                                     method should not be overridden.
Update (inherited from               Overloaded. Calls the respective
DbDataAdapter)                       INSERT, UPDATE, or DELETE statements
                                     for each inserted, updated, or
                                     deleted row in the specified
                                     DataSet.

*Public Instance Events*

Public instance methods in the MySqlDataAdapter class.

Disposed (inherited from Component)  Adds an event handler to listen to
                                     the Disposed event on the component.
FillError (inherited from            Returned when an error occurs
DataAdapter)                         during a fill operation.
*Note RowUpdated:                    Occurs during Update after a
connector-net-ref-mysqlclient-mysqldataadapter-rowupdated.command is executed against the data
                                     source. The attempt to update is
                                     made, so the event fires.
*Note RowUpdating:                   Occurs during Update before a
connector-net-ref-mysqlclient-mysqldataadapter-rowupdating.command is executed against the data
                                     source. The attempt to update is
                                     made, so the event fires.

*Protected Internal Instance Properties*

Protected internal instance properties in the MySqlDataAdapter class.

FillCommandBehavior (inherited from  Gets or sets the behavior of the
DbDataAdapter)                       command used to fill the data
                                     adapter.

*See Also*

*Note MySqlDataAdapter Class:
connector-net-ref-mysqlclient-mysqldataadapter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldataadapterconstructor,  Next: connector-net-ref-mysqlclient-mysqldataadapter-deletecommand1,  Prev: connector-net-ref-mysqlclient-mysqldataadaptermembers,  Up: connector-net-ref-mysqlclient-mysqldataadaptermembers

22.2.9.168 `MySqlDataAdapter' Constructor
.........................................

* Menu:

* connector-net-ref-mysqlclient-mysqldataadapterconstructor1::  `MySqlDataAdapter' Constructor
* connector-net-ref-mysqlclient-mysqldataadapterconstructor2::  `MySqlDataAdapter' Constructor
* connector-net-ref-mysqlclient-mysqldataadapterconstructor3::  `MySqlDataAdapter' Constructor
* connector-net-ref-mysqlclient-mysqldataadapterconstructor4::  `MySqlDataAdapter' Constructor

Initializes a new instance of the *Note MySqlDataAdapter:
connector-net-ref-mysqlclient-mysqldataadapter.  class.

*Overload List*

Initializes a new instance of the *Note MySqlDataAdapter:
connector-net-ref-mysqlclient-mysqldataadapter.  class.

   * *Note public MySqlDataAdapter();:
     connector-net-ref-mysqlclient-mysqldataadapterconstructor1.

   * *Note public MySqlDataAdapter(MySqlCommand);:
     connector-net-ref-mysqlclient-mysqldataadapterconstructor2.

   * *Note public MySqlDataAdapter(string:
     (MySqlConnection);)connector-net-ref-mysqlclient-mysqldataadapterconstructor3.

   * *Note public MySqlDataAdapter(string:
     (string);)connector-net-ref-mysqlclient-mysqldataadapterconstructor4.

*See Also*

*Note MySqlDataAdapter Class:
connector-net-ref-mysqlclient-mysqldataadapter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldataadapterconstructor1,  Next: connector-net-ref-mysqlclient-mysqldataadapterconstructor2,  Prev: connector-net-ref-mysqlclient-mysqldataadapterconstructor,  Up: connector-net-ref-mysqlclient-mysqldataadapterconstructor

22.2.9.169 `MySqlDataAdapter' Constructor
.........................................

Initializes a new instance of the *Note MySqlDataAdapter:
connector-net-ref-mysqlclient-mysqldataadapter.  class.

*Syntax: Visual Basic*

     Overloads Public Sub New()

*Syntax: C#*

     public MySqlDataAdapter();

*See Also*

*Note MySqlDataAdapter Class:
connector-net-ref-mysqlclient-mysqldataadapter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlDataAdapter Constructor Overload List:
connector-net-ref-mysqlclient-mysqldataadapterconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldataadapterconstructor2,  Next: connector-net-ref-mysqlclient-mysqldataadapterconstructor3,  Prev: connector-net-ref-mysqlclient-mysqldataadapterconstructor1,  Up: connector-net-ref-mysqlclient-mysqldataadapterconstructor

22.2.9.170 `MySqlDataAdapter' Constructor
.........................................

*Syntax: Visual Basic*

     Overloads Public Sub New( _
        ByVal selectCommand As MySqlCommand _
     )

*Syntax: C#*

     public MySqlDataAdapter(
     MySqlCommandselectCommand
     );

*See Also*

*Note MySqlDataAdapter Class:
connector-net-ref-mysqlclient-mysqldataadapter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlDataAdapter Constructor Overload List:
connector-net-ref-mysqlclient-mysqldataadapterconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldataadapterconstructor3,  Next: connector-net-ref-mysqlclient-mysqldataadapterconstructor4,  Prev: connector-net-ref-mysqlclient-mysqldataadapterconstructor2,  Up: connector-net-ref-mysqlclient-mysqldataadapterconstructor

22.2.9.171 `MySqlDataAdapter' Constructor
.........................................

*Syntax: Visual Basic*

     Overloads Public Sub New( _
        ByVal selectCommandText As String, _
        ByVal connection As MySqlConnection _
     )

*Syntax: C#*

     public MySqlDataAdapter(
     stringselectCommandText,
     MySqlConnectionconnection
     );

*See Also*

*Note MySqlDataAdapter Class:
connector-net-ref-mysqlclient-mysqldataadapter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlDataAdapter Constructor Overload List:
connector-net-ref-mysqlclient-mysqldataadapterconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldataadapterconstructor4,  Prev: connector-net-ref-mysqlclient-mysqldataadapterconstructor3,  Up: connector-net-ref-mysqlclient-mysqldataadapterconstructor

22.2.9.172 `MySqlDataAdapter' Constructor
.........................................

*Syntax: Visual Basic*

     Overloads Public Sub New( _
        ByVal selectCommandText As String, _
        ByVal selectConnString As String _
     )

*Syntax: C#*

     public MySqlDataAdapter(
     stringselectCommandText,
     stringselectConnString
     );

*See Also*

*Note MySqlDataAdapter Class:
connector-net-ref-mysqlclient-mysqldataadapter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlDataAdapter Constructor Overload List:
connector-net-ref-mysqlclient-mysqldataadapterconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldataadapter-deletecommand1,  Next: connector-net-ref-mysqlclient-mysqldataadapter-insertcommand1,  Prev: connector-net-ref-mysqlclient-mysqldataadapterconstructor,  Up: connector-net-ref-mysqlclient-mysqldataadaptermembers

22.2.9.173 DeleteCommand Property
.................................

*Syntax: Visual Basic*

     Overloads Public Property DeleteCommand As MySqlCommand

*Syntax: C#*

     new public MySqlCommand DeleteCommand {get; set;}

*See Also*

*Note MySqlDataAdapter Class:
connector-net-ref-mysqlclient-mysqldataadapter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldataadapter-insertcommand1,  Next: connector-net-ref-mysqlclient-mysqldataadapter-selectcommand1,  Prev: connector-net-ref-mysqlclient-mysqldataadapter-deletecommand1,  Up: connector-net-ref-mysqlclient-mysqldataadaptermembers

22.2.9.174 InsertCommand Property
.................................

*Syntax: Visual Basic*

     Overloads Public Property InsertCommand As MySqlCommand

*Syntax: C#*

     new public MySqlCommand InsertCommand {get; set;}

*See Also*

*Note MySqlDataAdapter Class:
connector-net-ref-mysqlclient-mysqldataadapter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldataadapter-selectcommand1,  Next: connector-net-ref-mysqlclient-mysqldataadapter-updatecommand1,  Prev: connector-net-ref-mysqlclient-mysqldataadapter-insertcommand1,  Up: connector-net-ref-mysqlclient-mysqldataadaptermembers

22.2.9.175 SelectCommand Property
.................................

*Syntax: Visual Basic*

     Overloads Public Property SelectCommand As MySqlCommand

*Syntax: C#*

     new public MySqlCommand SelectCommand {get; set;}

*See Also*

*Note MySqlDataAdapter Class:
connector-net-ref-mysqlclient-mysqldataadapter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldataadapter-updatecommand1,  Next: connector-net-ref-mysqlclient-mysqldataadapter-rowupdated,  Prev: connector-net-ref-mysqlclient-mysqldataadapter-selectcommand1,  Up: connector-net-ref-mysqlclient-mysqldataadaptermembers

22.2.9.176 UpdateCommand Property
.................................

*Syntax: Visual Basic*

     Overloads Public Property UpdateCommand As MySqlCommand

*Syntax: C#*

     new public MySqlCommand UpdateCommand {get; set;}

*See Also*

*Note MySqlDataAdapter Class:
connector-net-ref-mysqlclient-mysqldataadapter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldataadapter-rowupdated,  Next: connector-net-ref-mysqlclient-mysqldataadapter-rowupdating,  Prev: connector-net-ref-mysqlclient-mysqldataadapter-updatecommand1,  Up: connector-net-ref-mysqlclient-mysqldataadaptermembers

22.2.9.177 `MySqlDataAdapter.RowUpdated' Event
..............................................

* Menu:

* connector-net-ref-mysqlclient-mysqlrowupdatedeventhandler::  `MySqlRowUpdatedEventHandler' Delegate

Occurs during Update after a command is executed against the data
source. The attempt to update is made, so the event fires.

*Syntax: Visual Basic*

     Public Event RowUpdated As MySqlRowUpdatedEventHandler

*Syntax: C#*

     public event MySqlRowUpdatedEventHandler RowUpdated;

*Event Data*

The event handler receives an argument of type *Note
MySqlRowUpdatedEventArgs:
connector-net-ref-mysqlclient-mysqlrowupdatedeventargs.  containing
data related to this event. The following
`MySqlRowUpdatedEventArgsproperties' provide information specific to
this event.

Members of the MySqlRowUpdatedEventArgsproperties enumeration.

*Property*                           *Description*
*Note Command:                       Gets or sets the MySqlCommand
connector-net-ref-mysqlclient-mysqlrowupdatedeventargs-command1.executed when Update is called.
Errors                               Gets any errors generated by the
                                     .NET Framework data provider when
                                     the Commandwas executed.
RecordsAffected                      Gets the number of rows changed,
                                     inserted, or deleted by execution of
                                     the SQL statement.
Row                                  Gets the DataRowsent through an
                                     Update.
RowCount                             Gets the number of rows processed
                                     in a batch of updated records.
StatementType                        Gets the type of SQL statement
                                     executed.
Status                               Gets the UpdateStatus of the
                                     Commandproperty.
TableMapping                         Gets the DataTableMappingsent
                                     through an Update.

*See Also*

*Note MySqlDataAdapter Class:
connector-net-ref-mysqlclient-mysqldataadapter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlrowupdatedeventhandler,  Prev: connector-net-ref-mysqlclient-mysqldataadapter-rowupdated,  Up: connector-net-ref-mysqlclient-mysqldataadapter-rowupdated

22.2.9.178 `MySqlRowUpdatedEventHandler' Delegate
.................................................

* Menu:

* connector-net-ref-mysqlclient-mysqlrowupdatedeventargs::  `MySqlRowUpdatedEventArgs' Class

Represents the method that will handle the RowUpdatedevent of a *Note
MySqlDataAdapter: connector-net-ref-mysqlclient-mysqldataadapter.

*Syntax: Visual Basic*

     Public Delegate Sub MySqlRowUpdatedEventHandler( _
        ByVal sender As Object, _
        ByVal e As MySqlRowUpdatedEventArgs _
     )

*Syntax: C#*

     public delegate void MySqlRowUpdatedEventHandler(
     objectsender,
     MySqlRowUpdatedEventArgs
     );

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlrowupdatedeventargs,  Prev: connector-net-ref-mysqlclient-mysqlrowupdatedeventhandler,  Up: connector-net-ref-mysqlclient-mysqlrowupdatedeventhandler

22.2.9.179 `MySqlRowUpdatedEventArgs' Class
...........................................

* Menu:

* connector-net-ref-mysqlclient-mysqlrowupdatedeventargsmembers::  `MySqlRowUpdatedEventArgs' Members

Provides data for the RowUpdated event. This class cannot be inherited.

For a list of all members of this type, see *Note
MySqlRowUpdatedEventArgs Members:
connector-net-ref-mysqlclient-mysqlrowupdatedeventargsmembers .

*Syntax: Visual Basic*

     NotInheritable Public Class MySqlRowUpdatedEventArgs_
       Inherits RowUpdatedEventArgs

*Syntax: C#*

     public sealed class MySqlRowUpdatedEventArgs : RowUpdatedEventArgs

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySqlRowUpdatedEventArgs Members:
connector-net-ref-mysqlclient-mysqlrowupdatedeventargsmembers, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlrowupdatedeventargsmembers,  Prev: connector-net-ref-mysqlclient-mysqlrowupdatedeventargs,  Up: connector-net-ref-mysqlclient-mysqlrowupdatedeventargs

22.2.9.180 `MySqlRowUpdatedEventArgs' Members
.............................................

* Menu:

* connector-net-ref-mysqlclient-mysqlrowupdatedeventargsconstructor::  `MySqlRowUpdatedEventArgs' Constructor
* connector-net-ref-mysqlclient-mysqlrowupdatedeventargs-command1::  Command Property

*Note MySqlRowUpdatedEventArgs overview:
connector-net-ref-mysqlclient-mysqlrowupdatedeventargs.

*Public Instance Constructors*

Public instance constructors in the MySqlRowUpdatedEventArgs class.

*Note MySqlRowUpdatedEventArgs       Initializes a new instance of the
Constructor:                         MySqlRowUpdatedEventArgs class.
connector-net-ref-mysqlclient-mysqlrowupdatedeventargsconstructor.

*Public Instance Properties*

Public instance properties in the MySqlRowUpdatedEventArgs class.

*Note Command:                       Overloaded. Gets or sets the
connector-net-ref-mysqlclient-mysqlrowupdatedeventargs-command1.MySqlCommand executed when Update is
                                     called.
Errors (inherited from               Gets any errors generated by the
RowUpdatedEventArgs)                 .NET Framework data provider when
                                     the Commandwas executed.
RecordsAffected (inherited from      Gets the number of rows changed,
RowUpdatedEventArgs)                 inserted, or deleted by execution of
                                     the SQL statement.
Row (inherited from                  Gets the DataRowsent through an
RowUpdatedEventArgs)                 Update.
RowCount (inherited from             Gets the number of rows processed
RowUpdatedEventArgs)                 in a batch of updated records.
StatementType (inherited from        Gets the type of SQL statement
RowUpdatedEventArgs)                 executed.
Status (inherited from               Gets the UpdateStatus of the
RowUpdatedEventArgs)                 Commandproperty.
TableMapping (inherited from         Gets the DataTableMappingsent
RowUpdatedEventArgs)                 through an Update.

*Public Instance Methods*

Public instance methods in the MySqlRowUpdatedEventArgs class.

CopyToRows (inherited from           Overloaded. Copies references to
RowUpdatedEventArgs)                 the modified rows into the provided
                                     array.
Equals (inherited from Object)       Determines whether the specified
                                     Object is equal to the current
                                     Object.
GetHashCode (inherited from Object)  Serves as a hash function for a
                                     particular type. GetHashCode is
                                     suitable for use in hashing
                                     algorithms and data structures like
                                     a hash table.
GetType (inherited from Object)      Gets the Type of the current
                                     instance.
ToString (inherited from Object)     Returns a String that represents
                                     the current Object.

*See Also*

*Note MySqlRowUpdatedEventArgs Class:
connector-net-ref-mysqlclient-mysqlrowupdatedeventargs, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlrowupdatedeventargsconstructor,  Next: connector-net-ref-mysqlclient-mysqlrowupdatedeventargs-command1,  Prev: connector-net-ref-mysqlclient-mysqlrowupdatedeventargsmembers,  Up: connector-net-ref-mysqlclient-mysqlrowupdatedeventargsmembers

22.2.9.181 `MySqlRowUpdatedEventArgs' Constructor
.................................................

Initializes a new instance of the MySqlRowUpdatedEventArgs class.

*Syntax: Visual Basic*

     Public Sub New( _
        ByVal row As DataRow, _
        ByVal command As IDbCommand, _
        ByVal statementType As StatementType, _
        ByVal tableMapping As DataTableMapping _
     )

*Syntax: C#*

     public MySqlRowUpdatedEventArgs(
     DataRowrow,
     IDbCommandcommand,
     StatementTypestatementType,
     DataTableMappingtableMapping
     );

*Parameters*

   * `row': The DataRowsent through an Update.

   * `command': The IDbCommand executed when Update is called.

   * `statementType': One of the StatementTypevalues that specifies the
     type of query executed.

   * `tableMapping': The DataTableMapping sent through an Update.

*See Also*

*Note MySqlRowUpdatedEventArgs Class:
connector-net-ref-mysqlclient-mysqlrowupdatedeventargs, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlrowupdatedeventargs-command1,  Prev: connector-net-ref-mysqlclient-mysqlrowupdatedeventargsconstructor,  Up: connector-net-ref-mysqlclient-mysqlrowupdatedeventargsmembers

22.2.9.182 Command Property
...........................

Gets or sets the MySqlCommand executed when Update is called.

*Syntax: Visual Basic*

     Overloads Public ReadOnly Property Command As MySqlCommand

*Syntax: C#*

     new public MySqlCommand Command {get;}

*See Also*

*Note MySqlRowUpdatedEventArgs Class:
connector-net-ref-mysqlclient-mysqlrowupdatedeventargs, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqldataadapter-rowupdating,  Prev: connector-net-ref-mysqlclient-mysqldataadapter-rowupdated,  Up: connector-net-ref-mysqlclient-mysqldataadaptermembers

22.2.9.183 `MySqlDataAdapter.RowUpdating' Event
...............................................

* Menu:

* connector-net-ref-mysqlclient-mysqlrowupdatingeventhandler::  `MySqlRowUpdatingEventHandler' Delegate

Occurs during Update before a command is executed against the data
source. The attempt to update is made, so the event fires.

*Syntax: Visual Basic*

     Public Event RowUpdating As MySqlRowUpdatingEventHandler

*Syntax: C#*

     public event MySqlRowUpdatingEventHandler RowUpdating;

*Event Data*

The event handler receives an argument of type *Note
MySqlRowUpdatingEventArgs:
connector-net-ref-mysqlclient-mysqlrowupdatingeventargs.  containing
data related to this event. The following
`MySqlRowUpdatingEventArgsproperties' provide information specific to
this event.

Members of the MySqlRowUpdatingEventArgsproperties enumeration.

*Property*                           *Description*
*Note Command:                       Gets or sets the MySqlCommand to
connector-net-ref-mysqlclient-mysqlrowupdatingeventargs-command1.execute when performing the Update.
Errors                               Gets any errors generated by the
                                     .NET Framework data provider when
                                     the Command executes.
Row                                  Gets the DataRow that will be sent
                                     to the server as part of an insert,
                                     update, or delete operation.
StatementType                        Gets the type of SQL statement to
                                     execute.
Status                               Gets or sets the UpdateStatus of
                                     the Commandproperty.
TableMapping                         Gets the DataTableMapping to send
                                     through the Update.

*See Also*

*Note MySqlDataAdapter Class:
connector-net-ref-mysqlclient-mysqldataadapter, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlrowupdatingeventhandler,  Prev: connector-net-ref-mysqlclient-mysqldataadapter-rowupdating,  Up: connector-net-ref-mysqlclient-mysqldataadapter-rowupdating

22.2.9.184 `MySqlRowUpdatingEventHandler' Delegate
..................................................

* Menu:

* connector-net-ref-mysqlclient-mysqlrowupdatingeventargs::  `MySqlRowUpdatingEventArgs' Class

Represents the method that will handle the RowUpdatingevent of a *Note
MySqlDataAdapter: connector-net-ref-mysqlclient-mysqldataadapter.

*Syntax: Visual Basic*

     Public Delegate Sub MySqlRowUpdatingEventHandler( _
        ByVal sender As Object, _
        ByVal e As MySqlRowUpdatingEventArgs _
     )

*Syntax: C#*

     public delegate void MySqlRowUpdatingEventHandler(
     objectsender,
     MySqlRowUpdatingEventArgs
     );

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlrowupdatingeventargs,  Prev: connector-net-ref-mysqlclient-mysqlrowupdatingeventhandler,  Up: connector-net-ref-mysqlclient-mysqlrowupdatingeventhandler

22.2.9.185 `MySqlRowUpdatingEventArgs' Class
............................................

* Menu:

* connector-net-ref-mysqlclient-mysqlrowupdatingeventargsmembers::  `MySqlRowUpdatingEventArgs' Members

Provides data for the RowUpdating event. This class cannot be inherited.

For a list of all members of this type, see *Note
MySqlRowUpdatingEventArgs Members:
connector-net-ref-mysqlclient-mysqlrowupdatingeventargsmembers .

*Syntax: Visual Basic*

     NotInheritable Public Class MySqlRowUpdatingEventArgs_
       Inherits RowUpdatingEventArgs

*Syntax: C#*

     public sealed class MySqlRowUpdatingEventArgs : RowUpdatingEventArgs

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySqlRowUpdatingEventArgs Members:
connector-net-ref-mysqlclient-mysqlrowupdatingeventargsmembers, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlrowupdatingeventargsmembers,  Prev: connector-net-ref-mysqlclient-mysqlrowupdatingeventargs,  Up: connector-net-ref-mysqlclient-mysqlrowupdatingeventargs

22.2.9.186 `MySqlRowUpdatingEventArgs' Members
..............................................

* Menu:

* connector-net-ref-mysqlclient-mysqlrowupdatingeventargsconstructor::  `MySqlRowUpdatingEventArgs' Constructor
* connector-net-ref-mysqlclient-mysqlrowupdatingeventargs-command1::  Command Property

*Note MySqlRowUpdatingEventArgs overview:
connector-net-ref-mysqlclient-mysqlrowupdatingeventargs.

*Public Instance Constructors*

Public instance constructors in the MySqlRowUpdatingEventArgs class.

*Note MySqlRowUpdatingEventArgs      Initializes a new instance of the
Constructor:                         MySqlRowUpdatingEventArgs class.
connector-net-ref-mysqlclient-mysqlrowupdatingeventargsconstructor.

*Public Instance Properties*

Public instance properties in the MySqlRowUpdatingEventArgs class.

*Note Command:                       Overloaded. Gets or sets the
connector-net-ref-mysqlclient-mysqlrowupdatingeventargs-command1.MySqlCommand to execute when
                                     performing the Update.
Errors (inherited from               Gets any errors generated by the
RowUpdatingEventArgs)                .NET Framework data provider when
                                     the Command executes.
Row (inherited from                  Gets the DataRow that will be sent
RowUpdatingEventArgs)                to the server as part of an insert,
                                     update, or delete operation.
StatementType (inherited from        Gets the type of SQL statement to
RowUpdatingEventArgs)                execute.
Status (inherited from               Gets or sets the UpdateStatus of
RowUpdatingEventArgs)                the Commandproperty.
TableMapping (inherited from         Gets the DataTableMapping to send
RowUpdatingEventArgs)                through the Update.

*Public Instance Methods*

Public instance methods in the MySqlRowUpdatingEventArgs class.

Equals (inherited from Object)       Determines whether the specified
                                     Object is equal to the current
                                     Object.
GetHashCode (inherited from Object)  Serves as a hash function for a
                                     particular type. GetHashCode is
                                     suitable for use in hashing
                                     algorithms and data structures like
                                     a hash table.
GetType (inherited from Object)      Gets the Type of the current
                                     instance.
ToString (inherited from Object)     Returns a String that represents
                                     the current Object.

*See Also*

*Note MySqlRowUpdatingEventArgs Class:
connector-net-ref-mysqlclient-mysqlrowupdatingeventargs, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlrowupdatingeventargsconstructor,  Next: connector-net-ref-mysqlclient-mysqlrowupdatingeventargs-command1,  Prev: connector-net-ref-mysqlclient-mysqlrowupdatingeventargsmembers,  Up: connector-net-ref-mysqlclient-mysqlrowupdatingeventargsmembers

22.2.9.187 `MySqlRowUpdatingEventArgs' Constructor
..................................................

Initializes a new instance of the MySqlRowUpdatingEventArgs class.

*Syntax: Visual Basic*

     Public Sub New( _
        ByVal row As DataRow, _
        ByVal command As IDbCommand, _
        ByVal statementType As StatementType, _
        ByVal tableMapping As DataTableMapping _
     )

*Syntax: C#*

     public MySqlRowUpdatingEventArgs(
     DataRowrow,
     IDbCommandcommand,
     StatementTypestatementType,
     DataTableMappingtableMapping
     );

*Parameters*

   * `row': The DataRowto Update.

   * `command': The IDbCommandto execute during Update.

   * `statementType': One of the StatementTypevalues that specifies the
     type of query executed.

   * `tableMapping': The DataTableMappingsent through an Update.

*See Also*

*Note MySqlRowUpdatingEventArgs Class:
connector-net-ref-mysqlclient-mysqlrowupdatingeventargs, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlrowupdatingeventargs-command1,  Prev: connector-net-ref-mysqlclient-mysqlrowupdatingeventargsconstructor,  Up: connector-net-ref-mysqlclient-mysqlrowupdatingeventargsmembers

22.2.9.188 Command Property
...........................

Gets or sets the MySqlCommand to execute when performing the Update.

*Syntax: Visual Basic*

     Overloads Public Property Command As MySqlCommand

*Syntax: C#*

     new public MySqlCommand Command {get; set;}

*See Also*

*Note MySqlRowUpdatingEventArgs Class:
connector-net-ref-mysqlclient-mysqlrowupdatingeventargs, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor4,  Next: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor2,  Prev: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor3,  Up: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor

22.2.9.189 `MySqlCommandBuilder' Constructor
............................................

*Syntax: Visual Basic*

     Overloads Public Sub New( _
        ByVal adapter As MySqlDataAdapter, _
        ByVal lastOneWins As Boolean _
     )

*Syntax: C#*

     public MySqlCommandBuilder(
     MySqlDataAdapteradapter,
     boollastOneWins
     );

*See Also*

*Note MySqlCommandBuilder Class:
connector-net-ref-mysqlclient-mysqlcommandbuilder, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlCommandBuilder Constructor Overload List:
connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor2,  Prev: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor4,  Up: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor

22.2.9.190 `MySqlCommandBuilder' Constructor
............................................

*Syntax: Visual Basic*

     Overloads Public Sub New( _
        ByVal lastOneWins As Boolean _
     )

*Syntax: C#*

     public MySqlCommandBuilder(
     boollastOneWins
     );

*See Also*

*Note MySqlCommandBuilder Class:
connector-net-ref-mysqlclient-mysqlcommandbuilder, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient, *Note
MySqlCommandBuilder Constructor Overload List:
connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-dataadapter,  Next: connector-net-ref-mysqlclient-mysqlcommandbuilder-quoteprefix,  Prev: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor,  Up: connector-net-ref-mysqlclient-mysqlcommandbuildermembers

22.2.9.191 DataAdapter Property
...............................

*Syntax: Visual Basic*

     Public Property DataAdapter As MySqlDataAdapter

*Syntax: C#*

     public MySqlDataAdapter DataAdapter {get; set;}

*See Also*

*Note MySqlCommandBuilder Class:
connector-net-ref-mysqlclient-mysqlcommandbuilder, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-quoteprefix,  Next: connector-net-ref-mysqlclient-mysqlcommandbuilder-quotesuffix,  Prev: connector-net-ref-mysqlclient-mysqlcommandbuilder-dataadapter,  Up: connector-net-ref-mysqlclient-mysqlcommandbuildermembers

22.2.9.192 QuotePrefix Property
...............................

*Syntax: Visual Basic*

     Public Property QuotePrefix As String

*Syntax: C#*

     public string QuotePrefix {get; set;}

*See Also*

*Note MySqlCommandBuilder Class:
connector-net-ref-mysqlclient-mysqlcommandbuilder, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-quotesuffix,  Next: connector-net-ref-mysqlclient-mysqlcommandbuilder-getdeletecommand,  Prev: connector-net-ref-mysqlclient-mysqlcommandbuilder-quoteprefix,  Up: connector-net-ref-mysqlclient-mysqlcommandbuildermembers

22.2.9.193 QuoteSuffix Property
...............................

*Syntax: Visual Basic*

     Public Property QuoteSuffix As String

*Syntax: C#*

     public string QuoteSuffix {get; set;}

*See Also*

*Note MySqlCommandBuilder Class:
connector-net-ref-mysqlclient-mysqlcommandbuilder, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-getdeletecommand,  Next: connector-net-ref-mysqlclient-mysqlcommandbuilder-getinsertcommand,  Prev: connector-net-ref-mysqlclient-mysqlcommandbuilder-quotesuffix,  Up: connector-net-ref-mysqlclient-mysqlcommandbuildermembers

22.2.9.194 `MySqlCommandBuilder.GetDeleteCommand' Method
........................................................

*Syntax: Visual Basic*

     Public Function GetDeleteCommand() As MySqlCommand

*Syntax: C#*

     public MySqlCommand GetDeleteCommand();

*See Also*

*Note MySqlCommandBuilder Class:
connector-net-ref-mysqlclient-mysqlcommandbuilder, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-getinsertcommand,  Next: connector-net-ref-mysqlclient-mysqlcommandbuilder-getupdatecommand,  Prev: connector-net-ref-mysqlclient-mysqlcommandbuilder-getdeletecommand,  Up: connector-net-ref-mysqlclient-mysqlcommandbuildermembers

22.2.9.195 `MySqlCommandBuilder.GetInsertCommand' Method
........................................................

*Syntax: Visual Basic*

     Public Function GetInsertCommand() As MySqlCommand

*Syntax: C#*

     public MySqlCommand GetInsertCommand();

*See Also*

*Note MySqlCommandBuilder Class:
connector-net-ref-mysqlclient-mysqlcommandbuilder, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-getupdatecommand,  Next: connector-net-ref-mysqlclient-mysqlcommandbuilder-refreshschema,  Prev: connector-net-ref-mysqlclient-mysqlcommandbuilder-getinsertcommand,  Up: connector-net-ref-mysqlclient-mysqlcommandbuildermembers

22.2.9.196 `MySqlCommandBuilder.GetUpdateCommand' Method
........................................................

*Syntax: Visual Basic*

     Public Function GetUpdateCommand() As MySqlCommand

*Syntax: C#*

     public MySqlCommand GetUpdateCommand();

*See Also*

*Note MySqlCommandBuilder Class:
connector-net-ref-mysqlclient-mysqlcommandbuilder, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-refreshschema,  Prev: connector-net-ref-mysqlclient-mysqlcommandbuilder-getupdatecommand,  Up: connector-net-ref-mysqlclient-mysqlcommandbuildermembers

22.2.9.197 `MySqlCommandBuilder.RefreshSchema' Method
.....................................................

*Syntax: Visual Basic*

     Public Sub RefreshSchema()

*Syntax: C#*

     public void RefreshSchema();

*See Also*

*Note MySqlCommandBuilder Class:
connector-net-ref-mysqlclient-mysqlcommandbuilder, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlexception,  Next: connector-net-ref-mysqlclient-mysqlhelper,  Prev: connector-net-ref-mysqlclient-mysqlcommandbuilder,  Up: connector-net-ref-mysqlclient

22.2.9.198 `MySqlException' Class
.................................

* Menu:

* connector-net-ref-mysqlclient-mysqlexceptionmembers::  `MySqlException' Members

The exception that is thrown when MySQL returns an error. This class
cannot be inherited.

For a list of all members of this type, see *Note MySqlException
Members: connector-net-ref-mysqlclient-mysqlexceptionmembers .

*Syntax: Visual Basic*

     NotInheritable Public Class MySqlException_
       Inherits SystemException

*Syntax: C#*

     public sealed class MySqlException : SystemException

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySqlException Members:
connector-net-ref-mysqlclient-mysqlexceptionmembers, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlexceptionmembers,  Prev: connector-net-ref-mysqlclient-mysqlexception,  Up: connector-net-ref-mysqlclient-mysqlexception

22.2.9.199 `MySqlException' Members
...................................

* Menu:

* connector-net-ref-mysqlclient-mysqlexception-number::  Number Property

*Note MySqlException overview:
connector-net-ref-mysqlclient-mysqlexception.

*Public Instance Properties*

Public instance properties in the MySqlException class.

Data (inherited from Exception)      Gets a collection of key/value
                                     pairs that provide additional,
                                     user-defined information about the
                                     exception.
HelpLink (inherited from Exception)  Gets or sets a link to the help
                                     file associated with this exception.
InnerException (inherited from       Gets the `Exceptioninstance' that
Exception)                           caused the current exception.
Message (inherited from Exception)   Gets a message that describes the
                                     current exception.
*Note Number:                        Gets a number that identifies the
connector-net-ref-mysqlclient-mysqlexception-number.type of error. This number
                                     corresponds to the error numbers
                                     given in *Note
                                     error-messages-server::.
Source (inherited from Exception)    Gets or sets the name of the
                                     application or the object that
                                     causes the error.
StackTrace (inherited from           Gets a string representation of the
Exception)                           frames on the call stack at the time
                                     the current exception was thrown.
TargetSite (inherited from           Gets the method that throws the
Exception)                           current exception.

*Public Instance Methods*

Public instance methods in the MySqlException class.

Equals (inherited from Object)       Determines whether the specified
                                     Object is equal to the current
                                     Object.
GetBaseException (inherited from     When overridden in a derived class,
Exception)                           returns the Exception that is the
                                     root cause of one or more
                                     subsequent exceptions.
GetHashCode (inherited from Object)  Serves as a hash function for a
                                     particular type. GetHashCode is
                                     suitable for use in hashing
                                     algorithms and data structures like
                                     a hash table.
GetObjectData (inherited from        When overridden in a derived class,
Exception)                           sets the SerializationInfo with
                                     information about the exception.
GetType (inherited from Exception)   Gets the runtime type of the
                                     current instance.
ToString (inherited from Exception)  Creates and returns a string
                                     representation of the current
                                     exception.

*See Also*

*Note MySqlException Class:
connector-net-ref-mysqlclient-mysqlexception, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlexception-number,  Prev: connector-net-ref-mysqlclient-mysqlexceptionmembers,  Up: connector-net-ref-mysqlclient-mysqlexceptionmembers

22.2.9.200 Number Property
..........................

Gets a number that identifies the type of error.

*Syntax: Visual Basic*

     Public ReadOnly Property Number As Integer

*Syntax: C#*

     public int Number {get;}

*See Also*

*Note MySqlException Class:
connector-net-ref-mysqlclient-mysqlexception, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper,  Next: connector-net-ref-mysqlclient-mysqlerrorcode,  Prev: connector-net-ref-mysqlclient-mysqlexception,  Up: connector-net-ref-mysqlclient

22.2.9.201 `MySqlHelper' Class
..............................

* Menu:

* connector-net-ref-mysqlclient-mysqlhelpermembers::  `MySqlHelper' Members

Helper class that makes it easier to work with the provider.

For a list of all members of this type, see *Note MySqlHelper Members:
connector-net-ref-mysqlclient-mysqlhelpermembers .

*Syntax: Visual Basic*

     NotInheritable Public Class MySqlHelper

*Syntax: C#*

     public sealed class MySqlHelper

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySqlHelper Members:
connector-net-ref-mysqlclient-mysqlhelpermembers, *Note
MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelpermembers,  Prev: connector-net-ref-mysqlclient-mysqlhelper,  Up: connector-net-ref-mysqlclient-mysqlhelper

22.2.9.202 `MySqlHelper' Members
................................

* Menu:

* connector-net-ref-mysqlclient-mysqlhelper-executedatarow::  `MySqlHelper.ExecuteDataRow' Method
* connector-net-ref-mysqlclient-mysqlhelper-executedataset-overloads::  ExecuteDataset Method
* connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overloads::  ExecuteNonQuery Method
* connector-net-ref-mysqlclient-mysqlhelper-executereader-overloads::  ExecuteReader Method
* connector-net-ref-mysqlclient-mysqlhelper-executescalar-overloads::  ExecuteScalar Method
* connector-net-ref-mysqlclient-mysqlhelper-updatedataset::  `MySqlHelper.UpdateDataSet' Method

*Note MySqlHelper overview: connector-net-ref-mysqlclient-mysqlhelper.

*Public Static (Shared) Methods*

Public static (shared) methods in the MySqlHelper class.

*Note ExecuteDataRow:                Executes a single SQL statement and
connector-net-ref-mysqlclient-mysqlhelper-executedatarow.returns the first row of the
                                     resultset. A new MySqlConnection
                                     object is created, opened, and
                                     closed during this method.
*Note ExecuteDataset:                Overloaded. Executes a single SQL
connector-net-ref-mysqlclient-mysqlhelper-executedataset-overloads.statement and returns the resultset
                                     in a DataSet. A new MySqlConnection
                                     object is created, opened, and
                                     closed during this method.
*Note ExecuteNonQuery:               Overloaded. Executes a single
connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overloads.command against a MySQL database.
                                     The *Note MySqlConnection:
                                     connector-net-ref-mysqlclient-mysqlconnection.
                                     is assumed to be open when the
                                     method is called and remains open
                                     after the method completes.
*Note ExecuteReader:                 Overloaded. Executes a single
connector-net-ref-mysqlclient-mysqlhelper-executereader-overloads.command against a MySQL database.
*Note ExecuteScalar:                 Overloaded. Execute a single
connector-net-ref-mysqlclient-mysqlhelper-executescalar-overloads.command against a MySQL database.
*Note UpdateDataSet:                 Updates the given table with data
connector-net-ref-mysqlclient-mysqlhelper-updatedataset.from the given DataSet

*Public Instance Methods*

Public instance methods in the MySqlHelper class.

Equals (inherited from Object)       Determines whether the specified
                                     Object is equal to the current
                                     Object.
GetHashCode (inherited from Object)  Serves as a hash function for a
                                     particular type. GetHashCode is
                                     suitable for use in hashing
                                     algorithms and data structures like
                                     a hash table.
GetType (inherited from Object)      Gets the Type of the current
                                     instance.
ToString (inherited from Object)     Returns a String that represents
                                     the current Object.

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper-executedatarow,  Next: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overloads,  Prev: connector-net-ref-mysqlclient-mysqlhelpermembers,  Up: connector-net-ref-mysqlclient-mysqlhelpermembers

22.2.9.203 `MySqlHelper.ExecuteDataRow' Method
..............................................

Executes a single SQL statement and returns the first row of the
resultset. A new MySqlConnection object is created, opened, and closed
during this method.

*Syntax: Visual Basic*

     Public Shared Function ExecuteDataRow( _
        ByVal connectionString As String, _
        ByVal commandText As String, _
        ParamArray parms As MySqlParameter() _
     ) As DataRow

*Syntax: C#*

     public static DataRow ExecuteDataRow(
     stringconnectionString,
     stringcommandText,
        params MySqlParameter[]parms
     );

*Parameters*

   * `connectionString': Settings to be used for the connection

   * `commandText': Command to execute

   * `parms': Parameters to use for the command

*Return Value*

DataRow containing the first row of the resultset

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overloads,  Next: connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overloads,  Prev: connector-net-ref-mysqlclient-mysqlhelper-executedatarow,  Up: connector-net-ref-mysqlclient-mysqlhelpermembers

22.2.9.204 ExecuteDataset Method
................................

* Menu:

* connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-3::  `MySqlHelper.ExecuteDataset' Method
* connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-4::  `MySqlHelper.ExecuteDataset' Method
* connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-1::  `MySqlHelper.ExecuteDataset' Method
* connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-2::  `MySqlHelper.ExecuteDataset' Method

Executes a single SQL statement and returns the resultset in a DataSet.
The state of the *Note MySqlConnection:
connector-net-ref-mysqlclient-mysqlconnection.  object remains
unchanged after execution of this method.

*Overload List*

Executes a single SQL statement and returns the resultset in a DataSet.
The state of the *Note MySqlConnection:
connector-net-ref-mysqlclient-mysqlconnection.  object remains
unchanged after execution of this method.

   * *Note public static DataSet ExecuteDataset(MySqlConnection:
     (string);)connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-3.

Executes a single SQL statement and returns the resultset in a DataSet.
The state of the *Note MySqlConnection:
connector-net-ref-mysqlclient-mysqlconnection.  object remains
unchanged after execution of this method.

   * *Note public static DataSet ExecuteDataset(MySqlConnection:
     (string)connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-4.

Executes a single SQL statement and returns the resultset in a DataSet.
A new MySqlConnection object is created, opened, and closed during this
method.

   * *Note public static DataSet ExecuteDataset(string:
     (string);)connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-1.

Executes a single SQL statement and returns the resultset in a DataSet.
A new MySqlConnection object is created, opened, and closed during this
method.

   * *Note public static DataSet ExecuteDataset(string:
     (string)connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-2.

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-3,  Next: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-4,  Prev: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overloads,  Up: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overloads

22.2.9.205 `MySqlHelper.ExecuteDataset' Method
..............................................

Executes a single SQL statement and returns the resultset in a DataSet.
The state of the *Note MySqlConnection:
connector-net-ref-mysqlclient-mysqlconnection.  object remains
unchanged after execution of this method.

*Syntax: Visual Basic*

     Overloads Public Shared Function ExecuteDataset( _
        ByVal connection As MySqlConnection, _
        ByVal commandText As String _
     ) As DataSet

*Syntax: C#*

     public static DataSet ExecuteDataset(
     MySqlConnectionconnection,
     stringcommandText
     );

*Parameters*

   * `connection': *Note MySqlConnection:
     connector-net-ref-mysqlclient-mysqlconnection.  object to use

   * `commandText': Command to execute

*Return Value*

DataSetcontaining the resultset

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient,
*Note MySqlHelper.ExecuteDataset Overload List:
connector-net-ref-mysqlclient-mysqlhelper-executedataset-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-4,  Next: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-1,  Prev: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-3,  Up: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overloads

22.2.9.206 `MySqlHelper.ExecuteDataset' Method
..............................................

Executes a single SQL statement and returns the resultset in a DataSet.
The state of the *Note MySqlConnection:
connector-net-ref-mysqlclient-mysqlconnection.  object remains
unchanged after execution of this method.

*Syntax: Visual Basic*

     Overloads Public Shared Function ExecuteDataset( _
        ByVal connection As MySqlConnection, _
        ByVal commandText As String, _
        ParamArray commandParameters As MySqlParameter() _
     ) As DataSet

*Syntax: C#*

     public static DataSet ExecuteDataset(
     MySqlConnectionconnection,
     stringcommandText,
        params MySqlParameter[]commandParameters
     );

*Parameters*

   * `connection': *Note MySqlConnection:
     connector-net-ref-mysqlclient-mysqlconnection.  object to use

   * `commandText': Command to execute

   * `commandParameters': Parameters to use for the command

*Return Value*

DataSetcontaining the resultset

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient,
*Note MySqlHelper.ExecuteDataset Overload List:
connector-net-ref-mysqlclient-mysqlhelper-executedataset-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-1,  Next: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-4,  Up: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overloads

22.2.9.207 `MySqlHelper.ExecuteDataset' Method
..............................................

Executes a single SQL statement and returns the resultset in a DataSet.
A new MySqlConnection object is created, opened, and closed during this
method.

*Syntax: Visual Basic*

     Overloads Public Shared Function ExecuteDataset( _
        ByVal connectionString As String, _
        ByVal commandText As String _
     ) As DataSet

*Syntax: C#*

     public static DataSet ExecuteDataset(
     stringconnectionString,
     stringcommandText
     );

*Parameters*

   * `connectionString': Settings to be used for the connection

   * `commandText': Command to execute

*Return Value*

DataSetcontaining the resultset

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient,
*Note MySqlHelper.ExecuteDataset Overload List:
connector-net-ref-mysqlclient-mysqlhelper-executedataset-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-1,  Up: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overloads

22.2.9.208 `MySqlHelper.ExecuteDataset' Method
..............................................

Executes a single SQL statement and returns the resultset in a DataSet.
A new MySqlConnection object is created, opened, and closed during this
method.

*Syntax: Visual Basic*

     Overloads Public Shared Function ExecuteDataset( _
        ByVal connectionString As String, _
        ByVal commandText As String, _
        ParamArray commandParameters As MySqlParameter() _
     ) As DataSet

*Syntax: C#*

     public static DataSet ExecuteDataset(
     stringconnectionString,
     stringcommandText,
        params MySqlParameter[]commandParameters
     );

*Parameters*

   * `connectionString': Settings to be used for the connection

   * `commandText': Command to execute

   * `commandParameters': Parameters to use for the command

*Return Value*

DataSetcontaining the resultset

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient,
*Note MySqlHelper.ExecuteDataset Overload List:
connector-net-ref-mysqlclient-mysqlhelper-executedataset-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overloads,  Next: connector-net-ref-mysqlclient-mysqlhelper-executereader-overloads,  Prev: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overloads,  Up: connector-net-ref-mysqlclient-mysqlhelpermembers

22.2.9.209 ExecuteNonQuery Method
.................................

* Menu:

* connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overload-1::  `MySqlHelper.ExecuteNonQuery' Method
* connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overload-2::  `MySqlHelper.ExecuteNonQuery' Method

Executes a single command against a MySQL database. The *Note
MySqlConnection: connector-net-ref-mysqlclient-mysqlconnection.  is
assumed to be open when the method is called and remains open after the
method completes.

*Overload List*

Executes a single command against a MySQL database. The *Note
MySqlConnection: connector-net-ref-mysqlclient-mysqlconnection.  is
assumed to be open when the method is called and remains open after the
method completes.

   * *Note public static int ExecuteNonQuery(MySqlConnection:
     (string)connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overload-1.

Executes a single command against a MySQL database. A new *Note
MySqlConnection: connector-net-ref-mysqlclient-mysqlconnection.  is
created using the *Note ConnectionString:
connector-net-ref-mysqlclient-mysqlconnection-connectionstring.  given.

   * *Note public static int ExecuteNonQuery(string:
     (string)connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overload-2.

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overload-1,  Next: connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overloads,  Up: connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overloads

22.2.9.210 `MySqlHelper.ExecuteNonQuery' Method
...............................................

Executes a single command against a MySQL database. The *Note
MySqlConnection: connector-net-ref-mysqlclient-mysqlconnection.  is
assumed to be open when the method is called and remains open after the
method completes.

*Syntax: Visual Basic*

     Overloads Public Shared Function ExecuteNonQuery( _
        ByVal connection As MySqlConnection, _
        ByVal commandText As String, _
        ParamArray commandParameters As MySqlParameter() _
     ) As Integer

*Syntax: C#*

     public static int ExecuteNonQuery(
     MySqlConnectionconnection,
     stringcommandText,
        params MySqlParameter[]commandParameters
     );

*Parameters*

   * `connection': *Note MySqlConnection:
     connector-net-ref-mysqlclient-mysqlconnection.  object to use

   * `commandText': SQL statement to be executed

   * `commandParameters': Array of *Note MySqlParameter:
     connector-net-ref-mysqlclient-mysqlparameter.  objects to use with
     the command.

*Return Value*

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient,
*Note MySqlHelper.ExecuteNonQuery Overload List:
connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overload-1,  Up: connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overloads

22.2.9.211 `MySqlHelper.ExecuteNonQuery' Method
...............................................

Executes a single command against a MySQL database. A new *Note
MySqlConnection: connector-net-ref-mysqlclient-mysqlconnection.  is
created using the *Note ConnectionString:
connector-net-ref-mysqlclient-mysqlconnection-connectionstring.  given.

*Syntax: Visual Basic*

     Overloads Public Shared Function ExecuteNonQuery( _
        ByVal connectionString As String, _
        ByVal commandText As String, _
        ParamArray parms As MySqlParameter() _
     ) As Integer

*Syntax: C#*

     public static int ExecuteNonQuery(
     stringconnectionString,
     stringcommandText,
        params MySqlParameter[]parms
     );

*Parameters*

   * `connectionString': *Note ConnectionString:
     connector-net-ref-mysqlclient-mysqlconnection-connectionstring.
     to use

   * `commandText': SQL statement to be executed

   * `parms': Array of *Note MySqlParameter:
     connector-net-ref-mysqlclient-mysqlparameter.  objects to use with
     the command.

*Return Value*

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient,
*Note MySqlHelper.ExecuteNonQuery Overload List:
connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper-executereader-overloads,  Next: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overloads,  Prev: connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overloads,  Up: connector-net-ref-mysqlclient-mysqlhelpermembers

22.2.9.212 ExecuteReader Method
...............................

* Menu:

* connector-net-ref-mysqlclient-mysqlhelper-executereader-overload-1::  `MySqlHelper.ExecuteReader' Method
* connector-net-ref-mysqlclient-mysqlhelper-executereader-overload-2::  `MySqlHelper.ExecuteReader' Method

Executes a single command against a MySQL database.

*Overload List*

Executes a single command against a MySQL database.

   * *Note public static MySqlDataReader ExecuteReader(string:
     (string);)connector-net-ref-mysqlclient-mysqlhelper-executereader-overload-1.

Executes a single command against a MySQL database.

   * *Note public static MySqlDataReader ExecuteReader(string:
     (string)connector-net-ref-mysqlclient-mysqlhelper-executereader-overload-2.

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper-executereader-overload-1,  Next: connector-net-ref-mysqlclient-mysqlhelper-executereader-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlhelper-executereader-overloads,  Up: connector-net-ref-mysqlclient-mysqlhelper-executereader-overloads

22.2.9.213 `MySqlHelper.ExecuteReader' Method
.............................................

Executes a single command against a MySQL database.

*Syntax: Visual Basic*

     Overloads Public Shared Function ExecuteReader( _
        ByVal connectionString As String, _
        ByVal commandText As String _
     ) As MySqlDataReader

*Syntax: C#*

     public static MySqlDataReader ExecuteReader(
     stringconnectionString,
     stringcommandText
     );

*Parameters*

   * `connectionString': Settings to use for this command

   * `commandText': Command text to use

*Return Value*

*Note MySqlDataReader: connector-net-ref-mysqlclient-mysqldatareader.
object ready to read the results of the command

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient,
*Note MySqlHelper.ExecuteReader Overload List:
connector-net-ref-mysqlclient-mysqlhelper-executereader-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper-executereader-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlhelper-executereader-overload-1,  Up: connector-net-ref-mysqlclient-mysqlhelper-executereader-overloads

22.2.9.214 `MySqlHelper.ExecuteReader' Method
.............................................

Executes a single command against a MySQL database.

*Syntax: Visual Basic*

     Overloads Public Shared Function ExecuteReader( _
        ByVal connectionString As String, _
        ByVal commandText As String, _
        ParamArray commandParameters As MySqlParameter() _
     ) As MySqlDataReader

*Syntax: C#*

     public static MySqlDataReader ExecuteReader(
     stringconnectionString,
     stringcommandText,
        params MySqlParameter[]commandParameters
     );

*Parameters*

   * `connectionString': Settings to use for this command

   * `commandText': Command text to use

   * `commandParameters': Array of *Note MySqlParameter:
     connector-net-ref-mysqlclient-mysqlparameter.  objects to use with
     the command

*Return Value*

*Note MySqlDataReader: connector-net-ref-mysqlclient-mysqldatareader.
object ready to read the results of the command

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient,
*Note MySqlHelper.ExecuteReader Overload List:
connector-net-ref-mysqlclient-mysqlhelper-executereader-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overloads,  Next: connector-net-ref-mysqlclient-mysqlhelper-updatedataset,  Prev: connector-net-ref-mysqlclient-mysqlhelper-executereader-overloads,  Up: connector-net-ref-mysqlclient-mysqlhelpermembers

22.2.9.215 ExecuteScalar Method
...............................

* Menu:

* connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-3::  `MySqlHelper.ExecuteScalar' Method
* connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-4::  `MySqlHelper.ExecuteScalar' Method
* connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-1::  `MySqlHelper.ExecuteScalar' Method
* connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-2::  `MySqlHelper.ExecuteScalar' Method

Execute a single command against a MySQL database.

*Overload List*

Execute a single command against a MySQL database.

   * *Note public static object ExecuteScalar(MySqlConnection:
     (string);)connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-3.

Execute a single command against a MySQL database.

   * *Note public static object ExecuteScalar(MySqlConnection:
     (string)connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-4.

Execute a single command against a MySQL database.

   * *Note public static object ExecuteScalar(string:
     (string);)connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-1.

Execute a single command against a MySQL database.

   * *Note public static object ExecuteScalar(string:
     (string)connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-2.

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-3,  Next: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-4,  Prev: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overloads,  Up: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overloads

22.2.9.216 `MySqlHelper.ExecuteScalar' Method
.............................................

Execute a single command against a MySQL database.

*Syntax: Visual Basic*

     Overloads Public Shared Function ExecuteScalar( _
        ByVal connection As MySqlConnection, _
        ByVal commandText As String _
     ) As Object

*Syntax: C#*

     public static object ExecuteScalar(
     MySqlConnectionconnection,
     stringcommandText
     );

*Parameters*

   * `connection': *Note MySqlConnection:
     connector-net-ref-mysqlclient-mysqlconnection.  object to use

   * `commandText': Command text to use for the command

*Return Value*

The first column of the first row in the result set, or a null
reference if the result set is empty.

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient,
*Note MySqlHelper.ExecuteScalar Overload List:
connector-net-ref-mysqlclient-mysqlhelper-executescalar-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-4,  Next: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-1,  Prev: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-3,  Up: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overloads

22.2.9.217 `MySqlHelper.ExecuteScalar' Method
.............................................

Execute a single command against a MySQL database.

*Syntax: Visual Basic*

     Overloads Public Shared Function ExecuteScalar( _
        ByVal connection As MySqlConnection, _
        ByVal commandText As String, _
        ParamArray commandParameters As MySqlParameter() _
     ) As Object

*Syntax: C#*

     public static object ExecuteScalar(
     MySqlConnectionconnection,
     stringcommandText,
        params MySqlParameter[]commandParameters
     );

*Parameters*

   * `connection': *Note MySqlConnection:
     connector-net-ref-mysqlclient-mysqlconnection.  object to use

   * `commandText': Command text to use for the command

   * `commandParameters': Parameters to use for the command

*Return Value*

The first column of the first row in the result set, or a null
reference if the result set is empty.

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient,
*Note MySqlHelper.ExecuteScalar Overload List:
connector-net-ref-mysqlclient-mysqlhelper-executescalar-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-1,  Next: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-4,  Up: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overloads

22.2.9.218 `MySqlHelper.ExecuteScalar' Method
.............................................

Execute a single command against a MySQL database.

*Syntax: Visual Basic*

     Overloads Public Shared Function ExecuteScalar( _
        ByVal connectionString As String, _
        ByVal commandText As String _
     ) As Object

*Syntax: C#*

     public static object ExecuteScalar(
     stringconnectionString,
     stringcommandText
     );

*Parameters*

   * `connectionString': Settings to use for the update

   * `commandText': Command text to use for the update

*Return Value*

The first column of the first row in the result set, or a null
reference if the result set is empty.

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient,
*Note MySqlHelper.ExecuteScalar Overload List:
connector-net-ref-mysqlclient-mysqlhelper-executescalar-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-2,  Prev: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-1,  Up: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overloads

22.2.9.219 `MySqlHelper.ExecuteScalar' Method
.............................................

Execute a single command against a MySQL database.

*Syntax: Visual Basic*

     Overloads Public Shared Function ExecuteScalar( _
        ByVal connectionString As String, _
        ByVal commandText As String, _
        ParamArray commandParameters As MySqlParameter() _
     ) As Object

*Syntax: C#*

     public static object ExecuteScalar(
     stringconnectionString,
     stringcommandText,
        params MySqlParameter[]commandParameters
     );

*Parameters*

   * `connectionString': Settings to use for the command

   * `commandText': Command text to use for the command

   * `commandParameters': Parameters to use for the command

*Return Value*

The first column of the first row in the result set, or a null
reference if the result set is empty.

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient,
*Note MySqlHelper.ExecuteScalar Overload List:
connector-net-ref-mysqlclient-mysqlhelper-executescalar-overloads.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlhelper-updatedataset,  Prev: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overloads,  Up: connector-net-ref-mysqlclient-mysqlhelpermembers

22.2.9.220 `MySqlHelper.UpdateDataSet' Method
.............................................

Updates the given table with data from the given DataSet

*Syntax: Visual Basic*

     Public Shared Sub UpdateDataSet( _
        ByVal connectionString As String, _
        ByVal commandText As String, _
        ByVal ds As DataSet, _
        ByVal tablename As String _
     )

*Syntax: C#*

     public static void UpdateDataSet(
     stringconnectionString,
     stringcommandText,
     DataSetds,
     stringtablename
     );

*Parameters*

   * `connectionString': Settings to use for the update

   * `commandText': Command text to use for the update

   * `ds': DataSetcontaining the new data to use in the update

   * `tablename': Tablename in the data set to update

*See Also*

*Note MySqlHelper Class: connector-net-ref-mysqlclient-mysqlhelper,
*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-mysqlerrorcode,  Prev: connector-net-ref-mysqlclient-mysqlhelper,  Up: connector-net-ref-mysqlclient

22.2.9.221 `MySqlErrorCode' Enumeration
.......................................

*Syntax: Visual Basic*

     Public Enum MySqlErrorCode

*Syntax: C#*

     public enum MySqlErrorCode

*Members*

Members in the MySqlErrorCode enumeration.

*Member Name*                        *Description*
PacketTooLarge                       
PasswordNotAllowed                   
DuplicateKeyEntry                    
HostNotPrivileged                    
PasswordNoMatch                      
AnonymousUser                        
DuplicateKey                         
KeyNotFound                          
DuplicateKeyName                     

*Requirements*

Namespace: *Note MySql.Data.MySqlClient: connector-net-ref-mysqlclient.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySql.Data.MySqlClient Namespace: connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-types,  Prev: connector-net-ref-mysqlclient,  Up: connector-net-ref

22.2.9.222 `MySql.Data.Types' Namespace
.......................................

* Menu:

* connector-net-ref-typeshierarchy::  `MySql.Data.TypesHierarchy'
* connector-net-ref-types-mysqlconversionexception::  `MySqlConversionException' Class
* connector-net-ref-types-mysqldatetime::  `MySqlDateTime' Class

*Note Namespace hierarchy: connector-net-ref-typeshierarchy.

*Classes*

Classes in the MySql.Data.Types namespace.

*Class*                              *Description*
*Note MySqlConversionException:      Summary description for
connector-net-ref-types-mysqlconversionexception.MySqlConversionException.
*Note MySqlDateTime:                 Summary description for
connector-net-ref-types-mysqldatetime.MySqlDateTime.
*Note MySqlValue:                    
connector-net-ref-types-mysqlvalue.  


File: manual.info,  Node: connector-net-ref-typeshierarchy,  Next: connector-net-ref-types-mysqlconversionexception,  Prev: connector-net-ref-types,  Up: connector-net-ref-types

22.2.9.223 `MySql.Data.TypesHierarchy'
......................................

*See Also*

*Note MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqlconversionexception,  Next: connector-net-ref-types-mysqldatetime,  Prev: connector-net-ref-typeshierarchy,  Up: connector-net-ref-types

22.2.9.224 `MySqlConversionException' Class
...........................................

* Menu:

* connector-net-ref-types-mysqlconversionexceptionmembers::  `MySqlConversionException' Members

Summary description for MySqlConversionException.

For a list of all members of this type, see *Note
MySqlConversionException Members:
connector-net-ref-types-mysqlconversionexceptionmembers .

*Syntax: Visual Basic*

     Public Class MySqlConversionException_
       Inherits ApplicationException

*Syntax: C#*

     public class MySqlConversionException : ApplicationException

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.Types: connector-net-ref-types.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySqlConversionException Members:
connector-net-ref-types-mysqlconversionexceptionmembers, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqlconversionexceptionmembers,  Prev: connector-net-ref-types-mysqlconversionexception,  Up: connector-net-ref-types-mysqlconversionexception

22.2.9.225 `MySqlConversionException' Members
.............................................

* Menu:

* connector-net-ref-types-mysqlconversionexceptionconstructor::  `MySqlConversionException' Constructor

*Note MySqlConversionException overview:
connector-net-ref-types-mysqlconversionexception.

*Public Instance Constructors*

Public instance constructors in the MySqlConversionException class.

*Note MySqlConversionException       Ctor
Constructor:                         
connector-net-ref-types-mysqlconversionexceptionconstructor.

*Public Instance Properties*

Public instance properties in the MySqlConversionException class.

Data (inherited from Exception)      Gets a collection of key/value
                                     pairs that provide additional,
                                     user-defined information about the
                                     exception.
HelpLink (inherited from Exception)  Gets or sets a link to the help
                                     file associated with this exception.
InnerException (inherited from       Gets the `Exceptioninstance' that
Exception)                           caused the current exception.
Message (inherited from Exception)   Gets a message that describes the
                                     current exception.
Source (inherited from Exception)    Gets or sets the name of the
                                     application or the object that
                                     causes the error.
StackTrace (inherited from           Gets a string representation of the
Exception)                           frames on the call stack at the time
                                     the current exception was thrown.
TargetSite (inherited from           Gets the method that throws the
Exception)                           current exception.

*Public Instance Methods*

Public instance methods in the MySqlConversionException class.

Equals (inherited from Object)       Determines whether the specified
                                     Object is equal to the current
                                     Object.
GetBaseException (inherited from     When overridden in a derived class,
Exception)                           returns the Exception that is the
                                     root cause of one or more
                                     subsequent exceptions.
GetHashCode (inherited from Object)  Serves as a hash function for a
                                     particular type. GetHashCode is
                                     suitable for use in hashing
                                     algorithms and data structures like
                                     a hash table.
GetObjectData (inherited from        When overridden in a derived class,
Exception)                           sets the SerializationInfo with
                                     information about the exception.
GetType (inherited from Exception)   Gets the runtime type of the
                                     current instance.
ToString (inherited from Exception)  Creates and returns a string
                                     representation of the current
                                     exception.

*Protected Instance Properties*

Protected instance properties in the MySqlConversionException class.

HResult (inherited from Exception)   Gets or sets `HRESULT', a coded
                                     numeric value that is assigned to a
                                     specific exception.

*Protected Instance Methods*

Protected instance methods in the MySqlConversionException class.

Finalize (inherited from Object)     Allows an Object to attempt to free
                                     resources and perform other cleanup
                                     operations before the Object is
                                     reclaimed by garbage collection.
MemberwiseClone (inherited from      Creates a shallow copy of the
Object)                              current Object.

*See Also*

*Note MySqlConversionException Class:
connector-net-ref-types-mysqlconversionexception, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqlconversionexceptionconstructor,  Prev: connector-net-ref-types-mysqlconversionexceptionmembers,  Up: connector-net-ref-types-mysqlconversionexceptionmembers

22.2.9.226 `MySqlConversionException' Constructor
.................................................

*Syntax: Visual Basic*

     Public Sub New( _
        ByVal msg As String _
     )

*Syntax: C#*

     public MySqlConversionException(
     stringmsg
     );

*See Also*

*Note MySqlConversionException Class:
connector-net-ref-types-mysqlconversionexception, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqldatetime,  Prev: connector-net-ref-types-mysqlconversionexception,  Up: connector-net-ref-types

22.2.9.227 `MySqlDateTime' Class
................................

* Menu:

* connector-net-ref-types-mysqldatetimemembers::  `MySqlDateTime' Members
* connector-net-ref-mysqlclient-memcached-client::  `Client' Class
* connector-net-ref-mysqlclient-memcached-binaryclient::  `BinaryClient' Class
* connector-net-ref-mysqlclient-memcached-textclient::  `TextClient' Class
* connector-net-ref-replication::  `MySql.Data.MySqlClient.Replication' Namespace

Summary description for MySqlDateTime.

For a list of all members of this type, see *Note MySqlDateTime
Members: connector-net-ref-types-mysqldatetimemembers .

*Syntax: Visual Basic*

     Public Class MySqlDateTime_
       Inherits MySqlValue_
       Implements IConvertible, IComparable

*Syntax: C#*

     public class MySqlDateTime : MySqlValue, IConvertible, IComparable

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.Types: connector-net-ref-types.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySqlDateTime Members:
connector-net-ref-types-mysqldatetimemembers, *Note MySql.Data.Types
Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqldatetimemembers,  Next: connector-net-ref-mysqlclient-memcached-client,  Prev: connector-net-ref-types-mysqldatetime,  Up: connector-net-ref-types-mysqldatetime

22.2.9.228 `MySqlDateTime' Members
..................................

* Menu:

* connector-net-ref-types-mysqldatetime-op-explicit::  `MySqlDateTime' Explicit `MySqlDateTime' to `DateTime' Conversion
* connector-net-ref-types-mysqldatetime-day::  Day Property
* connector-net-ref-types-mysqldatetime-hour::  Hour Property
* connector-net-ref-types-mysqlvalue-isnull::  IsNull Property
* connector-net-ref-types-mysqldatetime-isvaliddatetime::  IsValidDateTime Property
* connector-net-ref-types-mysqldatetime-millisecond::  Millisecond Property
* connector-net-ref-types-mysqldatetime-minute::  Minute Property
* connector-net-ref-types-mysqldatetime-month::  Month Property
* connector-net-ref-types-mysqldatetime-second::  Second Property
* connector-net-ref-types-mysqldatetime-year::  Year Property
* connector-net-ref-types-mysqldatetime-getdatetime::  `MySqlDateTime.GetDateTime' Method
* connector-net-ref-types-mysqldatetime-tostring::  `MySqlDateTime.ToString' Method

*Note MySqlDateTime overview: connector-net-ref-types-mysqldatetime.

*Public Static (Shared) Type Conversions*

Public static (shared) type conversions in the MySqlDateTime class.

*Note Explicit MySqlDateTime to      
DateTime Conversion:                 
connector-net-ref-types-mysqldatetime-op-explicit.

*Public Instance Properties*

Public instance properties in the MySqlDateTime class.

*Note Day:                           Returns the day portion of this
connector-net-ref-types-mysqldatetime-day.datetime
*Note Hour:                          Returns the hour portion of this
connector-net-ref-types-mysqldatetime-hour.datetime
*Note IsNull:                        
connector-net-ref-types-mysqlvalue-isnull.
(inherited from MySqlValue)          
*Note IsValidDateTime:               Indicates if this object contains a
connector-net-ref-types-mysqldatetime-isvaliddatetime.value that can be represented as a
                                     DateTime
*Note Minute:                        Returns the minute portion of this
connector-net-ref-types-mysqldatetime-minute.datetime
*Note Month:                         Returns the month portion of this
connector-net-ref-types-mysqldatetime-month.datetime
*Note Second:                        Returns the second portion of this
connector-net-ref-types-mysqldatetime-second.datetime
*Note Millisecond:                   Returns the millisecond portion of
connector-net-ref-types-mysqldatetime-millisecond.this datetime
*Note ValueAsObject:                 Returns the value of this field as
connector-net-ref-types-mysqlvalue-valueasobject.an object
(inherited from MySqlValue)          
*Note Year:                          Returns the year portion of this
connector-net-ref-types-mysqldatetime-year.datetime

*Public Instance Methods*

Public instance methods in the MySqlDateTime class.

Equals (inherited from Object)       Determines whether the specified
                                     Object is equal to the current
                                     Object.
*Note GetDateTime:                   Returns this value as a DateTime
connector-net-ref-types-mysqldatetime-getdatetime.
GetHashCode (inherited from Object)  Serves as a hash function for a
                                     particular type. GetHashCode is
                                     suitable for use in hashing
                                     algorithms and data structures like
                                     a hash table.
GetType (inherited from Object)      Gets the Type of the current
                                     instance.
*Note ToString:                      Returns a MySQL-specific string
connector-net-ref-types-mysqldatetime-tostring.representation of this value

*Protected Instance Fields*

Protected instance fields in the MySqlDateTime class.

*Note classType:                     The system type represented by this
connector-net-ref-types-mysqlvalue-classtype.value
(inherited from MySqlValue)          
*Note dbType:                        The generic dbtype of this value
connector-net-ref-types-mysqlvalue-dbtype.
(inherited from MySqlValue)          
*Note isNull:                        Is this value null
connector-net-ref-types-mysqlvalue-isnull.
(inherited from MySqlValue)          
*Note mySqlDbType:                   The specific MySQL db type
connector-net-ref-types-mysqlvalue-mysqldbtype.
(inherited from MySqlValue)          
*Note mySqlTypeName:                 The MySQL-specific typename of this
connector-net-ref-types-mysqlvalue-mysqltypename.value
(inherited from MySqlValue)          
*Note objectValue:                   
connector-net-ref-types-mysqlvalue-objectvalue.
(inherited from MySqlValue)          

*Protected Instance Methods*

Protected instance methods in the MySqlDateTime class.

Finalize (inherited from Object)     Allows an Object to attempt to free
                                     resources and perform other cleanup
                                     operations before the Object is
                                     reclaimed by garbage collection.
MemberwiseClone (inherited from      Creates a shallow copy of the
Object)                              current Object.

*See Also*

*Note MySqlDateTime Class: connector-net-ref-types-mysqldatetime, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqldatetime-op-explicit,  Next: connector-net-ref-types-mysqldatetime-day,  Prev: connector-net-ref-types-mysqldatetimemembers,  Up: connector-net-ref-types-mysqldatetimemembers

22.2.9.229 `MySqlDateTime' Explicit `MySqlDateTime' to `DateTime' Conversion
............................................................................

*Syntax: Visual Basic*

     MySqlDateTime.op_Explicit(val)

*Syntax: C#*

     public static explicit operator DateTime(
     MySqlDateTimeval
     );

*Parameters*

   * `val':

*Return Value*

*See Also*

*Note MySqlDateTime Class: connector-net-ref-types-mysqldatetime, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqldatetime-day,  Next: connector-net-ref-types-mysqldatetime-hour,  Prev: connector-net-ref-types-mysqldatetime-op-explicit,  Up: connector-net-ref-types-mysqldatetimemembers

22.2.9.230 Day Property
.......................

Returns the day portion of this datetime

*Syntax: Visual Basic*

     Public Property Day As Integer

*Syntax: C#*

     public int Day {get; set;}

*See Also*

*Note MySqlDateTime Class: connector-net-ref-types-mysqldatetime, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqldatetime-hour,  Next: connector-net-ref-types-mysqlvalue-isnull,  Prev: connector-net-ref-types-mysqldatetime-day,  Up: connector-net-ref-types-mysqldatetimemembers

22.2.9.231 Hour Property
........................

Returns the hour portion of this datetime

*Syntax: Visual Basic*

     Public Property Hour As Integer

*Syntax: C#*

     public int Hour {get; set;}

*See Also*

*Note MySqlDateTime Class: connector-net-ref-types-mysqldatetime, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqlvalue-isnull,  Next: connector-net-ref-types-mysqldatetime-isvaliddatetime,  Prev: connector-net-ref-types-mysqldatetime-hour,  Up: connector-net-ref-types-mysqldatetimemembers

22.2.9.232 IsNull Property
..........................

* Menu:

* connector-net-ref-types-mysqlvalue::  `MySqlValue' Class

*Syntax: Visual Basic*

     Public Property IsNull As Boolean

*Syntax: C#*

     public bool IsNull {get; set;}

*See Also*

*Note MySqlValue Class: connector-net-ref-types-mysqlvalue, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqlvalue,  Prev: connector-net-ref-types-mysqlvalue-isnull,  Up: connector-net-ref-types-mysqlvalue-isnull

22.2.9.233 `MySqlValue' Class
.............................

* Menu:

* connector-net-ref-types-mysqlvaluemembers::  `MySqlValue' Members

For a list of all members of this type, see *Note MySqlValue Members:
connector-net-ref-types-mysqlvaluemembers .

*Syntax: Visual Basic*

     MustInherit Public Class MySqlValue

*Syntax: C#*

     public abstract class MySqlValue

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.Types: connector-net-ref-types.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note MySqlValue Members: connector-net-ref-types-mysqlvaluemembers,
*Note MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqlvaluemembers,  Prev: connector-net-ref-types-mysqlvalue,  Up: connector-net-ref-types-mysqlvalue

22.2.9.234 `MySqlValue' Members
...............................

* Menu:

* connector-net-ref-types-mysqlvalue-numberformat::  `MySqlValue.numberFormat' Field
* connector-net-ref-types-mysqlvalueconstructor::  `MySqlValue' Constructor
* connector-net-ref-types-mysqlvalue-valueasobject::  ValueAsObject Property
* connector-net-ref-types-mysqlvalue-tostring::  `MySqlValue.ToString' Method
* connector-net-ref-types-mysqlvalue-classtype::  `MySqlValue.classType' Field
* connector-net-ref-types-mysqlvalue-dbtype::  `MySqlValue.dbType' Field
* connector-net-ref-types-mysqlvalue-mysqldbtype::  `MySqlValue.mySqlDbType' Field
* connector-net-ref-types-mysqlvalue-mysqltypename::  `MySqlValue.mySqlTypeName' Field
* connector-net-ref-types-mysqlvalue-objectvalue::  `MySqlValue.objectValue' Field

*Note MySqlValue overview: connector-net-ref-types-mysqlvalue.

*Protected Static (Shared) Fields*

Protected static (shared) fields in the MySqlValue class.

*Note numberFormat:                  
connector-net-ref-types-mysqlvalue-numberformat.

*Public Instance Constructors*

Public instance constructors in the MySqlValue class.

*Note MySqlValue Constructor:        Initializes a new instance of the
connector-net-ref-types-mysqlvalueconstructor.*Note MySqlValue:
                                     connector-net-ref-types-mysqlvalue.
                                     class.

*Public Instance Properties*

Public instance properties in the MySqlValue class.

*Note IsNull:                        
connector-net-ref-types-mysqlvalue-isnull.
*Note ValueAsObject:                 Returns the value of this field as
connector-net-ref-types-mysqlvalue-valueasobject.an object

*Public Instance Methods*

Public instance methods in the MySqlValue class.

Equals (inherited from Object)       Determines whether the specified
                                     Object is equal to the current
                                     Object.
GetHashCode (inherited from Object)  Serves as a hash function for a
                                     particular type. GetHashCode is
                                     suitable for use in hashing
                                     algorithms and data structures like
                                     a hash table.
GetType (inherited from Object)      Gets the Type of the current
                                     instance.
*Note ToString:                      Returns a string representation of
connector-net-ref-types-mysqlvalue-tostring.this value

*Protected Instance Fields*

Protected instance fields in the MySqlValue class.

*Note classType:                     The system type represented by this
connector-net-ref-types-mysqlvalue-classtype.value
*Note dbType:                        The generic dbtype of this value
connector-net-ref-types-mysqlvalue-dbtype.
*Note isNull:                        Is this value null
connector-net-ref-types-mysqlvalue-isnull.
*Note mySqlDbType:                   The specific MySQL db type
connector-net-ref-types-mysqlvalue-mysqldbtype.
*Note mySqlTypeName:                 The MySQL-specific typename of this
connector-net-ref-types-mysqlvalue-mysqltypename.value
*Note objectValue:                   
connector-net-ref-types-mysqlvalue-objectvalue.

*Protected Instance Methods*

Protected instance methods in the MySqlValue class.

Finalize (inherited from Object)     Allows an Object to attempt to free
                                     resources and perform other cleanup
                                     operations before the Object is
                                     reclaimed by garbage collection.
MemberwiseClone (inherited from      Creates a shallow copy of the
Object)                              current Object.

*See Also*

*Note MySqlValue Class: connector-net-ref-types-mysqlvalue, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqlvalue-numberformat,  Next: connector-net-ref-types-mysqlvalueconstructor,  Prev: connector-net-ref-types-mysqlvaluemembers,  Up: connector-net-ref-types-mysqlvaluemembers

22.2.9.235 `MySqlValue.numberFormat' Field
..........................................

*Syntax: Visual Basic*

     Protected Shared numberFormat As NumberFormatInfo

*Syntax: C#*

     protected static NumberFormatInfo numberFormat;

*See Also*

*Note MySqlValue Class: connector-net-ref-types-mysqlvalue, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqlvalueconstructor,  Next: connector-net-ref-types-mysqlvalue-valueasobject,  Prev: connector-net-ref-types-mysqlvalue-numberformat,  Up: connector-net-ref-types-mysqlvaluemembers

22.2.9.236 `MySqlValue' Constructor
...................................

Initializes a new instance of the *Note MySqlValue:
connector-net-ref-types-mysqlvalue.  class.

*Syntax: Visual Basic*

     Public Sub New()

*Syntax: C#*

     public MySqlValue();

*See Also*

*Note MySqlValue Class: connector-net-ref-types-mysqlvalue, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqlvalue-valueasobject,  Next: connector-net-ref-types-mysqlvalue-tostring,  Prev: connector-net-ref-types-mysqlvalueconstructor,  Up: connector-net-ref-types-mysqlvaluemembers

22.2.9.237 ValueAsObject Property
.................................

Returns the value of this field as an object

*Syntax: Visual Basic*

     Public ReadOnly Property ValueAsObject As Object

*Syntax: C#*

     public object ValueAsObject {get;}

*See Also*

*Note MySqlValue Class: connector-net-ref-types-mysqlvalue, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqlvalue-tostring,  Next: connector-net-ref-types-mysqlvalue-classtype,  Prev: connector-net-ref-types-mysqlvalue-valueasobject,  Up: connector-net-ref-types-mysqlvaluemembers

22.2.9.238 `MySqlValue.ToString' Method
.......................................

Returns a string representation of this value

*Syntax: Visual Basic*

     Overrides Public Function ToString() As String

*Syntax: C#*

     public override string ToString();

*See Also*

*Note MySqlValue Class: connector-net-ref-types-mysqlvalue, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqlvalue-classtype,  Next: connector-net-ref-types-mysqlvalue-dbtype,  Prev: connector-net-ref-types-mysqlvalue-tostring,  Up: connector-net-ref-types-mysqlvaluemembers

22.2.9.239 `MySqlValue.classType' Field
.......................................

The system type represented by this value

*Syntax: Visual Basic*

     Protected classType As Type

*Syntax: C#*

     protected Type classType;

*See Also*

*Note MySqlValue Class: connector-net-ref-types-mysqlvalue, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqlvalue-dbtype,  Next: connector-net-ref-types-mysqlvalue-mysqldbtype,  Prev: connector-net-ref-types-mysqlvalue-classtype,  Up: connector-net-ref-types-mysqlvaluemembers

22.2.9.240 `MySqlValue.dbType' Field
....................................

The generic dbtype of this value

*Syntax: Visual Basic*

     Protected dbType As DbType

*Syntax: C#*

     protected DbType dbType;

*See Also*

*Note MySqlValue Class: connector-net-ref-types-mysqlvalue, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqlvalue-mysqldbtype,  Next: connector-net-ref-types-mysqlvalue-mysqltypename,  Prev: connector-net-ref-types-mysqlvalue-dbtype,  Up: connector-net-ref-types-mysqlvaluemembers

22.2.9.241 `MySqlValue.mySqlDbType' Field
.........................................

The specific MySQL db type

*Syntax: Visual Basic*

     Protected mySqlDbType As MySqlDbType

*Syntax: C#*

     protected MySqlDbType mySqlDbType;

*See Also*

*Note MySqlValue Class: connector-net-ref-types-mysqlvalue, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqlvalue-mysqltypename,  Next: connector-net-ref-types-mysqlvalue-objectvalue,  Prev: connector-net-ref-types-mysqlvalue-mysqldbtype,  Up: connector-net-ref-types-mysqlvaluemembers

22.2.9.242 `MySqlValue.mySqlTypeName' Field
...........................................

The MySQL-specific typename of this value

*Syntax: Visual Basic*

     Protected mySqlTypeName As String

*Syntax: C#*

     protected string mySqlTypeName;

*See Also*

*Note MySqlValue Class: connector-net-ref-types-mysqlvalue, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqlvalue-objectvalue,  Prev: connector-net-ref-types-mysqlvalue-mysqltypename,  Up: connector-net-ref-types-mysqlvaluemembers

22.2.9.243 `MySqlValue.objectValue' Field
.........................................

*Syntax: Visual Basic*

     Protected objectValue As Object

*Syntax: C#*

     protected object objectValue;

*See Also*

*Note MySqlValue Class: connector-net-ref-types-mysqlvalue, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqldatetime-isvaliddatetime,  Next: connector-net-ref-types-mysqldatetime-millisecond,  Prev: connector-net-ref-types-mysqlvalue-isnull,  Up: connector-net-ref-types-mysqldatetimemembers

22.2.9.244 IsValidDateTime Property
...................................

Indicates if this object contains a value that can be represented as a
DateTime

*Syntax: Visual Basic*

     Public ReadOnly Property IsValidDateTime As Boolean

*Syntax: C#*

     public bool IsValidDateTime {get;}

*See Also*

*Note MySqlDateTime Class: connector-net-ref-types-mysqldatetime, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqldatetime-millisecond,  Next: connector-net-ref-types-mysqldatetime-minute,  Prev: connector-net-ref-types-mysqldatetime-isvaliddatetime,  Up: connector-net-ref-types-mysqldatetimemembers

22.2.9.245 Millisecond Property
...............................

Returns the millisecond portion of this datetime

*Syntax: Visual Basic*

     Public Property Millisecond As Integer

*Syntax: C#*

     public int Millisecond {get; set;}

*See Also*

*Note MySqlDateTime Class: connector-net-ref-types-mysqldatetime, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqldatetime-minute,  Next: connector-net-ref-types-mysqldatetime-month,  Prev: connector-net-ref-types-mysqldatetime-millisecond,  Up: connector-net-ref-types-mysqldatetimemembers

22.2.9.246 Minute Property
..........................

Returns the minute portion of this datetime

*Syntax: Visual Basic*

     Public Property Minute As Integer

*Syntax: C#*

     public int Minute {get; set;}

*See Also*

*Note MySqlDateTime Class: connector-net-ref-types-mysqldatetime, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqldatetime-month,  Next: connector-net-ref-types-mysqldatetime-second,  Prev: connector-net-ref-types-mysqldatetime-minute,  Up: connector-net-ref-types-mysqldatetimemembers

22.2.9.247 Month Property
.........................

Returns the month portion of this datetime

*Syntax: Visual Basic*

     Public Property Month As Integer

*Syntax: C#*

     public int Month {get; set;}

*See Also*

*Note MySqlDateTime Class: connector-net-ref-types-mysqldatetime, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqldatetime-second,  Next: connector-net-ref-types-mysqldatetime-year,  Prev: connector-net-ref-types-mysqldatetime-month,  Up: connector-net-ref-types-mysqldatetimemembers

22.2.9.248 Second Property
..........................

Returns the second portion of this datetime

*Syntax: Visual Basic*

     Public Property Second As Integer

*Syntax: C#*

     public int Second {get; set;}

*See Also*

*Note MySqlDateTime Class: connector-net-ref-types-mysqldatetime, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqldatetime-year,  Next: connector-net-ref-types-mysqldatetime-getdatetime,  Prev: connector-net-ref-types-mysqldatetime-second,  Up: connector-net-ref-types-mysqldatetimemembers

22.2.9.249 Year Property
........................

Returns the year portion of this datetime

*Syntax: Visual Basic*

     Public Property Year As Integer

*Syntax: C#*

     public int Year {get; set;}

*See Also*

*Note MySqlDateTime Class: connector-net-ref-types-mysqldatetime, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqldatetime-getdatetime,  Next: connector-net-ref-types-mysqldatetime-tostring,  Prev: connector-net-ref-types-mysqldatetime-year,  Up: connector-net-ref-types-mysqldatetimemembers

22.2.9.250 `MySqlDateTime.GetDateTime' Method
.............................................

Returns this value as a DateTime

*Syntax: Visual Basic*

     Public Function GetDateTime() As Date

*Syntax: C#*

     public DateTime GetDateTime();

*See Also*

*Note MySqlDateTime Class: connector-net-ref-types-mysqldatetime, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-types-mysqldatetime-tostring,  Prev: connector-net-ref-types-mysqldatetime-getdatetime,  Up: connector-net-ref-types-mysqldatetimemembers

22.2.9.251 `MySqlDateTime.ToString' Method
..........................................

Returns a MySQL-specific string representation of this value

*Syntax: Visual Basic*

     Overrides Public Function ToString() As String

*Syntax: C#*

     public override string ToString();

*See Also*

*Note MySqlDateTime Class: connector-net-ref-types-mysqldatetime, *Note
MySql.Data.Types Namespace: connector-net-ref-types.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-client,  Next: connector-net-ref-mysqlclient-memcached-binaryclient,  Prev: connector-net-ref-types-mysqldatetimemembers,  Up: connector-net-ref-types-mysqldatetime

22.2.9.252 `Client' Class
.........................

* Menu:

* connector-net-ref-mysqlclient-memcached-clientmembers::  `Client' Members

For a list of all members of this type, see *Note Client Members:
connector-net-ref-mysqlclient-memcached-clientmembers .

*Syntax: Visual Basic*

     Public MustInherit Class Client

*Syntax: C#*

     public abstract class Client

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.MySqlClient.Memcached:
connector-net-ref-mysqlclient-memcached-client.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note Client Members:
connector-net-ref-mysqlclient-memcached-clientmembers, *Note
MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient-memcached-client.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-clientmembers,  Prev: connector-net-ref-mysqlclient-memcached-client,  Up: connector-net-ref-mysqlclient-memcached-client

22.2.9.253 `Client' Members
...........................

* Menu:

* connector-net-ref-mysqlclient-memcached-client-server::  server Property
* connector-net-ref-mysqlclient-memcached-client-port::  Port Property
* connector-net-ref-mysqlclient-memcached-client-stream::  `stream'
* connector-net-ref-mysqlclient-memcached-client-open::  `Client.Open' Method
* connector-net-ref-mysqlclient-memcached-client-close::  `Client.Close' Method
* connector-net-ref-mysqlclient-memcached-client-add::  `Client.Add' Method
* connector-net-ref-mysqlclient-memcached-client-append::  `Client.Append' Method
* connector-net-ref-mysqlclient-memcached-client-cas::  `Client.Cas' Method
* connector-net-ref-mysqlclient-memcached-client-decrement::  `Client.Decrement' Method
* connector-net-ref-mysqlclient-memcached-client-delete::  `Client.Delete' Method
* connector-net-ref-mysqlclient-memcached-client-flushall::  `Client.FlushAll' Method
* connector-net-ref-mysqlclient-memcached-client-get::  `Client.Get' Method
* connector-net-ref-mysqlclient-memcached-client-increment::  `Client.Increment' Method
* connector-net-ref-mysqlclient-memcached-client-prepend::  `Client.Prepend' Method
* connector-net-ref-mysqlclient-memcached-client-close-replace::  `Client.Replace' Method
* connector-net-ref-mysqlclient-memcached-client-set::  `Client.Set' Method
* connector-net-ref-mysqlclient-memcached-client-getinstance::  `Client.GetInstance' Method

*Note Client overview: connector-net-ref-mysqlclient-memcached-client.

*Public Static Methods*

Public static methods constructors in the
MySql.Data.MySqlClient.Memcached.Client namespace.

*Note GetInstance:                   Factory method for creating
connector-net-ref-mysqlclient-memcached-client.instances of Client that implement a
                                     connection with the requested
                                     features. The connection object
                                     returned must be explicitely opened
                                     see method Client.Open

*Protected Instance Properties*

Protected instance properties in the Client class.

*Note server:                        The server DNS or IP address used
connector-net-ref-mysqlclient-memcached-client-server.by the connection.
*Note port:                          The port used by the connection.
connector-net-ref-mysqlclient-memcached-client-port.
*Note stream:                        The network stream used by the
connector-net-ref-mysqlclient-memcached-client-stream.connecition.

*Public Instance Methods*

Public instance methods in the Client class.

*Note Open:                          Opens the client connection.
connector-net-ref-mysqlclient-memcached-client-open.
*Note Close:                         Closes the client connection.
connector-net-ref-mysqlclient-memcached-client-close.
*Note Add:                           Adds a new key/value pair with the
connector-net-ref-mysqlclient-memcached-client-add.given TimeSpan expiration.
*Note Append:                        Appends the data to the existing
connector-net-ref-mysqlclient-memcached-client-append.data for the associated key..
*Note Cas:                           Executes the Check-and-set
connector-net-ref-mysqlclient-memcached-client-cas.Memcached operation.
*Note Decrement>:                    Decrements the value associated
connector-net-ref-mysqlclient-memcached-client-decrement.with a key by the given amount.
*Note Delete:                        Removes they pair key/value given
connector-net-ref-mysqlclient-memcached-client-delete.the specified key.
*Note FlushAll:                      Removes all entries from the
connector-net-ref-mysqlclient-memcached-client-flushall.storage, effectively invalidating
                                     the whole cache.
*Note Get:                           Get the key/value pair associated
connector-net-ref-mysqlclient-memcached-client-get.with a given key.
*Note Increment:                     Increments the value associated
connector-net-ref-mysqlclient-memcached-client-increment.with a key by the given amount.
*Note Prepend:                       Prepends the data to the existing
connector-net-ref-mysqlclient-memcached-client-prepend.data for the associated key.
*Note Replace:                       Replaces the value associated with
connector-net-ref-mysqlclient-memcached-client-close-replace.the given key with another value.
*Note Set:                           Set the value of a given key.
connector-net-ref-mysqlclient-memcached-client-set.

*Public Static Methods*

Static instance methods in the Client class.

*Note GetInstance:                   Factory method for creating
connector-net-ref-mysqlclient-memcached-client-getinstance.instances of Client that implement a
                                     connection with the requested
                                     features. The connection object
                                     returned must be explicitely opened
                                     see method Open.

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-client-server,  Next: connector-net-ref-mysqlclient-memcached-client-port,  Prev: connector-net-ref-mysqlclient-memcached-clientmembers,  Up: connector-net-ref-mysqlclient-memcached-clientmembers

22.2.9.254 server Property
..........................

The server DNS or IP address used by the connection.

*Syntax: Visual Basic*

     Protected server As String

*Syntax: C#*

     protected string server

*Property Value*

The server DNS or IP address used by the connection.

*Remarks*

None

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-client-port,  Next: connector-net-ref-mysqlclient-memcached-client-stream,  Prev: connector-net-ref-mysqlclient-memcached-client-server,  Up: connector-net-ref-mysqlclient-memcached-clientmembers

22.2.9.255 Port Property
........................

The port used by the connection.

*Syntax: Visual Basic*

     Protected port As UInteger

*Syntax: C#*

     protected uint port

*Property Value*

The TCP port where the Innodb Memcached plugin will be listening for
connections.

*Remarks*

None.

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-client-stream,  Next: connector-net-ref-mysqlclient-memcached-client-open,  Prev: connector-net-ref-mysqlclient-memcached-client-port,  Up: connector-net-ref-mysqlclient-memcached-clientmembers

22.2.9.256 `stream'
...................

The network stream used by the connection.

*Syntax: Visual Basic*

     Protected stream As Stream

*Syntax: C#*

     protected Stream stream;

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-client-open,  Next: connector-net-ref-mysqlclient-memcached-client-close,  Prev: connector-net-ref-mysqlclient-memcached-client-stream,  Up: connector-net-ref-mysqlclient-memcached-clientmembers

22.2.9.257 `Client.Open' Method
...............................

*Syntax: Visual Basic*

     Public Overridable Sub Open

*Syntax: C#*

     public virtual void Open();

Opens the client connection.

*Remarks*

A client object can be opened and closed many times during its life
cycle.

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-client-close,  Next: connector-net-ref-mysqlclient-memcached-client-add,  Prev: connector-net-ref-mysqlclient-memcached-client-open,  Up: connector-net-ref-mysqlclient-memcached-clientmembers

22.2.9.258 `Client.Close' Method
................................

*Syntax: Visual Basic*

     Public Overridable Sub Close

*Syntax: C#*

     public virtual void Close();

Closes the client connection.

*Remarks*

A client object can be opened and closed many times during its life
cycle.

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-client-add,  Next: connector-net-ref-mysqlclient-memcached-client-append,  Prev: connector-net-ref-mysqlclient-memcached-client-close,  Up: connector-net-ref-mysqlclient-memcached-clientmembers

22.2.9.259 `Client.Add' Method
..............................

*Syntax: Visual Basic*

     Public MustOverride Sub Add (
      key As String,
      data As Object,
      expiration As TimeSpan
     )

*Syntax: C#*

     public abstract void Add(
      string key,
      Object data,
      TimeSpan expiration
     );

Adds a new key/value pair with the given TimeSpan expiration.

*Remarks*

None.

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.

Parameters

   * `key', The key for identifying the entry.

   * `data', The data to associate with the key.

   * `expiration', The interval of timespan, use `TimeSpan.Zero' for no
     expiration.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-client-append,  Next: connector-net-ref-mysqlclient-memcached-client-cas,  Prev: connector-net-ref-mysqlclient-memcached-client-add,  Up: connector-net-ref-mysqlclient-memcached-clientmembers

22.2.9.260 `Client.Append' Method
.................................

*Syntax: Visual Basic*

     Public MustOverride Sub Append (
      key As String,
      data As Object
     )

*Syntax: C#*

     public abstract void Append(
      string key,
      Object data
     );

Appends the data to the existing data for the associated key.

*Remarks*

None.

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.

Parameters

   * `key', The key for identifying the entry.

   * `data', The data to append with the data associated with the key.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-client-cas,  Next: connector-net-ref-mysqlclient-memcached-client-decrement,  Prev: connector-net-ref-mysqlclient-memcached-client-append,  Up: connector-net-ref-mysqlclient-memcached-clientmembers

22.2.9.261 `Client.Cas' Method
..............................

*Syntax: Visual Basic*

     Public MustOverride Sub Cas (
      key As String,
      data As Object,
      expiration As TimeSpan,
      casUnique As ULong
     )

*Syntax: C#*

     public abstract void Cas(
      string key,
      Object data,
      TimeSpan expiration,
      ulong casUnique
     );

Executes the Check-and-set Memcached operation.

*Remarks*

None.

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.

Parameters

   * `key', The key for identifying the entry.

   * `data', The data to use in the CAS.

   * `expiration', The interval of timespan, use `TimeSpan.Zero' for no
     expiration.

   * `casUnique', The CAS unique value to use.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-client-decrement,  Next: connector-net-ref-mysqlclient-memcached-client-delete,  Prev: connector-net-ref-mysqlclient-memcached-client-cas,  Up: connector-net-ref-mysqlclient-memcached-clientmembers

22.2.9.262 `Client.Decrement' Method
....................................

*Syntax: Visual Basic*

     Public MustOverride Sub Decrement (
      key As String,
      amount As Integer
     )

*Syntax: C#*

     public abstract void Decrement(
      string key,
      int amount
     );

Decrements the value associated with a key by the given amount.

*Remarks*

None.

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.

Parameters

   * `key', The key associated with the value to decrement.

   * `amount', The amount to decrement the value.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-client-delete,  Next: connector-net-ref-mysqlclient-memcached-client-flushall,  Prev: connector-net-ref-mysqlclient-memcached-client-decrement,  Up: connector-net-ref-mysqlclient-memcached-clientmembers

22.2.9.263 `Client.Delete' Method
.................................

*Syntax: Visual Basic*

     Public MustOverride Sub Delete (
      key As String
     )

*Syntax: C#*

     public abstract void Delete(
      string key
     );

Removes they pair key/value given the specified key.

*Remarks*

None.

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.

Parameters

   * `key', The key associated with the value to delete.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-client-flushall,  Next: connector-net-ref-mysqlclient-memcached-client-get,  Prev: connector-net-ref-mysqlclient-memcached-client-delete,  Up: connector-net-ref-mysqlclient-memcached-clientmembers

22.2.9.264 `Client.FlushAll' Method
...................................

*Syntax: Visual Basic*

     Public MustOverride Sub FlushAll (
      delay As TimeSpan
     )

*Syntax: C#*

     public abstract void FlushAll(
      TimeSpan delay
     );

Removes all entries from the storage, effectively invalidating the
whole cache.

*Remarks*

None.

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.

Parameters

   * `TimeSpan', The interval after which the cache will be cleaned.
     Can be TimeSpan.Zero for immediately.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-client-get,  Next: connector-net-ref-mysqlclient-memcached-client-increment,  Prev: connector-net-ref-mysqlclient-memcached-client-flushall,  Up: connector-net-ref-mysqlclient-memcached-clientmembers

22.2.9.265 `Client.Get' Method
..............................

*Syntax: Visual Basic*

     Public MustOverride Function Get (
      key As String
     ) As KeyValuePair(Of String, Object)

*Syntax: C#*

     public abstract KeyValuePair string, Object> Get(
      string key
     );

Get the key/value pair associated with a given key.

*Remarks*

None.

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.

Parameters

   * `key', The key for which to returm the key/value.

Return Value

The key/value associated with the key or a MemcachedException if it
does not exists.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-client-increment,  Next: connector-net-ref-mysqlclient-memcached-client-prepend,  Prev: connector-net-ref-mysqlclient-memcached-client-get,  Up: connector-net-ref-mysqlclient-memcached-clientmembers

22.2.9.266 `Client.Increment' Method
....................................

*Syntax: Visual Basic*

     Public MustOverride Sub Increment (
      key As String,
      amount As Integer
     )

*Syntax: C#*

     public abstract void Increment(
      string key,
      int amount
     );

Increments the value associated with a key by the given amount.

*Remarks*

None.

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.

Parameters

   * `key', The key associated with the value to increment.

   * `amount', The amount to increment the value.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-client-prepend,  Next: connector-net-ref-mysqlclient-memcached-client-close-replace,  Prev: connector-net-ref-mysqlclient-memcached-client-increment,  Up: connector-net-ref-mysqlclient-memcached-clientmembers

22.2.9.267 `Client.Prepend' Method
..................................

*Syntax: Visual Basic*

     Public MustOverride Sub Prepend (
      key As String,
      data As Object
     )

*Syntax: C#*

     public abstract void Prepend(
      string key,
      Object data
     );

Prepends the data to the existing data for the associated key.

*Remarks*

None.

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.

Parameters

   * `key', The key for identifying the entry.

   * `data', The data to append with the data associated with the key.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-client-close-replace,  Next: connector-net-ref-mysqlclient-memcached-client-set,  Prev: connector-net-ref-mysqlclient-memcached-client-prepend,  Up: connector-net-ref-mysqlclient-memcached-clientmembers

22.2.9.268 `Client.Replace' Method
..................................

*Syntax: Visual Basic*

     Public MustOverride Sub Replace (
      key As String,
      data As Object,
      expiration As TimeSpan
     )

*Syntax: C#*

     public abstract void Replace(
      string key,
      Object data,
      TimeSpan expiration
     );

Replaces the value associated with the given key with another value.

*Remarks*

None.

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.

Parameters

   * `key', The key for identifying the entry.

   * `data', The data to replace the value associated with the key.

   * `expiration', The interval of timespan, use `TimeSpan.Zero' for no
     expiration.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-client-set,  Next: connector-net-ref-mysqlclient-memcached-client-getinstance,  Prev: connector-net-ref-mysqlclient-memcached-client-close-replace,  Up: connector-net-ref-mysqlclient-memcached-clientmembers

22.2.9.269 `Client.Set' Method
..............................

*Syntax: Visual Basic*

     Public MustOverride Sub Set (
      key As String,
      data As Object,
      expiration As TimeSpan
     )

*Syntax: C#*

     public abstract void Set(
      string key,
      Object data,
      TimeSpan expiration
     );

Set the value of a given key.

*Remarks*

None.

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.

Parameters

   * `key', The key for identifying the entry.

   * `data', The data to associate with the given key.

   * `expiration', The interval of timespan, use `TimeSpan.Zero' for no
     expiration.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-client-getinstance,  Prev: connector-net-ref-mysqlclient-memcached-client-set,  Up: connector-net-ref-mysqlclient-memcached-clientmembers

22.2.9.270 `Client.GetInstance' Method
......................................

*Syntax: Visual Basic*

     Public Shared Function GetInstance (
      server As String,
      port As UInteger,
      flags As MemcachedFlags
     ) As Client

*Syntax: C#*

     public static Client GetInstance(
      string server,
      uint port,
      MemcachedFlags flags
     );

Factory method for creating instances of Client that implement a
connection with the requested features. The connection object returned
must be explicitely opened see method Open().

*Remarks*

None.

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.

Parameters

   * `server', The Memcached server DNS or IP address.

   * `port', The port for the Memcached server.

   * `flags', A set of flags indicating characterestics requested.

Return Value

An instance of a client connection ready to be used.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-binaryclient,  Next: connector-net-ref-mysqlclient-memcached-textclient,  Prev: connector-net-ref-mysqlclient-memcached-client,  Up: connector-net-ref-types-mysqldatetime

22.2.9.271 `BinaryClient' Class
...............................

* Menu:

* connector-net-ref-mysqlclient-memcached-binaryclientmembers::  `BinaryClient' Members

For a list of all members of this type, see *Note BinaryClient Members:
connector-net-ref-mysqlclient-memcached-clientmembers .

*Syntax: Visual Basic*

     Public Class BinaryClient
      Inherits Client

*Syntax: C#*

     public class BinaryClient : Client

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.MySqlClient.Memcached:
connector-net-ref-mysqlclient-memcached-client.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note BinaryClient Members:
connector-net-ref-mysqlclient-memcached-clientmembers, *Note
MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient-memcached-client.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-binaryclientmembers,  Prev: connector-net-ref-mysqlclient-memcached-binaryclient,  Up: connector-net-ref-mysqlclient-memcached-binaryclient

22.2.9.272 `BinaryClient' Members
.................................

*Note BinaryClient overview:
connector-net-ref-mysqlclient-memcached-client.

*Public Static Methods*

Public static methods constructors in the
MySql.Data.MySqlClient.Memcached.BinaryClient namespace.

*Note GetInstance:                   Inherited from Client
connector-net-ref-mysqlclient-memcached-client-getinstance.

*Protected Instance Properties*

Protected instance properties in the BinaryClient class.

*Note server:                        Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-server.
*Note port:                          Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-port.
*Note stream:                        Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-stream.

*Public Instance Methods*

Public instance methods in the BinaryClient class.

*Note Open:                          Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-open.
*Note Close:                         Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-close.
*Note Add:                           Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-add.
*Note Append:                        Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-append.
*Note Cas:                           Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-cas.
*Note Decrement>:                    Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-decrement.
*Note Delete:                        Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-delete.
*Note FlushAll:                      Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-flushall.
*Note Get:                           Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-get.
*Note Increment:                     Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-increment.
*Note Prepend:                       Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-prepend.
*Note Replace:                       Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-close-replace.
*Note Set:                           Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-set.

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-textclient,  Next: connector-net-ref-replication,  Prev: connector-net-ref-mysqlclient-memcached-binaryclient,  Up: connector-net-ref-types-mysqldatetime

22.2.9.273 `TextClient' Class
.............................

* Menu:

* connector-net-ref-mysqlclient-memcached-textclientmembers::  `TextClient' Members

For a list of all members of this type, see *Note TextClient Members:
connector-net-ref-mysqlclient-memcached-clientmembers .

*Syntax: Visual Basic*

     Public Class TextClient
      Inherits Client

*Syntax: C#*

     public class TextClient : Client

*Thread Safety*

Public static (Shared in Visual Basic) members of this type are safe
for multithreaded operations. Instance members are not guaranteed to be
thread-safe.

*Requirements*

Namespace: *Note MySql.Data.MySqlClient.Memcached:
connector-net-ref-mysqlclient-memcached-client.

Assembly: MySql.Data (in MySql.Data.dll)

*See Also*

*Note TextClient Members:
connector-net-ref-mysqlclient-memcached-clientmembers, *Note
MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient-memcached-client.


File: manual.info,  Node: connector-net-ref-mysqlclient-memcached-textclientmembers,  Prev: connector-net-ref-mysqlclient-memcached-textclient,  Up: connector-net-ref-mysqlclient-memcached-textclient

22.2.9.274 `TextClient' Members
...............................

*Note TextClient overview:
connector-net-ref-mysqlclient-memcached-client.

*Public Static Methods*

Public static methods constructors in the
MySql.Data.MySqlClient.Memcached.textclient namespace.

*Note GetInstance:                   Inherited from Client
connector-net-ref-mysqlclient-memcached-client-getinstance.

*Protected Instance Properties*

Protected instance properties in the TextClient class.

*Note server:                        Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-server.
*Note port:                          Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-port.
*Note stream:                        Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-stream.

*Public Instance Methods*

Public instance methods in the TextClient class.

*Note Open:                          Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-open.
*Note Close:                         Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-close.
*Note Add:                           Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-add.
*Note Append:                        Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-append.
*Note Cas:                           Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-cas.
*Note Decrement>:                    Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-decrement.
*Note Delete:                        Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-delete.
*Note FlushAll:                      Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-flushall.
*Note Get:                           Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-get.
*Note Increment:                     Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-increment.
*Note Prepend:                       Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-prepend.
*Note Replace:                       Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-close-replace.
*Note Set:                           Inherited from Client.
connector-net-ref-mysqlclient-memcached-client-set.

*See Also*

*Note Client Class: connector-net-ref-mysqlclient-memcached-client,
*Note MySql.Data.MySqlClient.Memcached Namespace:
connector-net-ref-mysqlclient.


File: manual.info,  Node: connector-net-ref-replication,  Prev: connector-net-ref-mysqlclient-memcached-textclient,  Up: connector-net-ref-types-mysqldatetime

22.2.9.275 `MySql.Data.MySqlClient.Replication' Namespace
.........................................................

* Menu:

* connector-net-ref-replication-replicationmanager::  `ReplicationManager' Class
* connector-net-ref-replication-replicationroundrobinservergroup::  `ReplicationRoundRobinServerGroup' Class
* connector-net-ref-replication-replicationserver::  `ReplicationServer' Class
* connector-net-ref-replication-replicationservergroup::  `ReplicationServerGroup' Class

This section of the manual contains the API reference for Replication
and Load balancing components.

*Classes*

Classes in the MySql.Data.MySqlClient.Replication namespace.

Class                                Description
*Note ReplicationManager:            Manager for Replication and Load
connector-net-ref-replication-replicationmanager.Balancing features.
*Note                                Class that implements Round Robing
ReplicationRoundRobinServerGroup:    Load Balancing technique.
connector-net-ref-replication-replicationroundrobinservergroup.
*Note ReplicationServer:             Represents a server in Replication
connector-net-ref-replication-replicationserver.environment that contains
                                     information about
*Note ReplicationServerGroup:        Abstract class used to implement a
connector-net-ref-replication-replicationservergroup.custom load balancing plugin


File: manual.info,  Node: connector-net-ref-replication-replicationmanager,  Next: connector-net-ref-replication-replicationroundrobinservergroup,  Prev: connector-net-ref-replication,  Up: connector-net-ref-replication

22.2.9.276 `ReplicationManager' Class
.....................................

* Menu:

* connector-net-ref-replication-replicationmanagermembers::  `ReplicationManager' Members

*Note Members: connector-net-ref-replication-replicationmanagermembers.

Namespace: *Note MySql.Data.MySqlClient.Replication:
connector-net-ref-replication.

Assembly: MySql.Data (in `MySql.Data.dll')

*Syntax C#*

     public static class ReplicationManager

*Syntax Visual Basic*

     Public NotInheritable Class ReplicationManager

*Syntax Visual C++*

     public ref class ReplicationManager abstract sealed

*See Also*

*Note ReplicationManager Members:
connector-net-ref-replication-replicationmanagermembers.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationmanagermembers,  Prev: connector-net-ref-replication-replicationmanager,  Up: connector-net-ref-replication-replicationmanager

22.2.9.277 `ReplicationManager' Members
.......................................

* Menu:

* connector-net-ref-replication-replicationmanager-addgroup::  AddGroup Method
* connector-net-ref-replication-replicationmanager-getgroup::  `ReplicationManager.GetGroup' Method
* connector-net-ref-replication-replicationmanager-getnewconnection::  `ReplicationManager.GetNewConnection' Method
* connector-net-ref-replication-replicationmanager-getserver::  `ReplicationManager.GetServer' Method
* connector-net-ref-replication-replicationmanager-isreplicationgroup::  `ReplicationManager.IsReplicationGroup' Method
* connector-net-ref-replication-replicationmanager-groups::  `ReplicationManager.Groups' Property

The *Note ReplicationManager:
connector-net-ref-replication-replicationmanager.  type exposes the
following members.

*Public Static Methods*

Public Static Methods

Name                                 Description
*Note AddGroup(String:               Adds a Default Server Group to the
(Int32))connector-net-ref-replication-replicationmanager-addgroup.list
*Note AddGroup(String:               Adds a Server Group to the list
(String)connector-net-ref-replication-replicationmanager-addgroup2.
*Note GetGroup:                      Gets a Server Group by name
connector-net-ref-replication-replicationmanager-getgroup.
*Note GetNewConnection:              Assigns a new server driver to the
connector-net-ref-replication-replicationmanager-getnewconnection.connection object
*Note GetServer:                     Gets the next server from a
connector-net-ref-replication-replicationmanager-getserver.replication group
*Note IsReplicationGroup:            Validates if the replication group
connector-net-ref-replication-replicationmanager-isreplicationgroup.name exists

*Public Static Properties*

Public Static Properties

Name                                 Description
*Note Groups:                        Returns Replication Server Group
connector-net-ref-replication-replicationmanager-groups.List

*See Also*

*Note ReplicationManager Class:
connector-net-ref-replication-replicationmanager.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationmanager-addgroup,  Next: connector-net-ref-replication-replicationmanager-getgroup,  Prev: connector-net-ref-replication-replicationmanagermembers,  Up: connector-net-ref-replication-replicationmanagermembers

22.2.9.278 AddGroup Method
..........................

* Menu:

* connector-net-ref-replication-replicationmanager-addgroup1::  `ReplicationManager.AddGroup' Method (String, Int32)
* connector-net-ref-replication-replicationmanager-addgroup2::  `ReplicationManager.AddGroup' Method (String, String, Int32)

*Overload List*

   * *Note AddGroup(String:
     (Int32))connector-net-ref-replication-replicationmanager-addgroup1.

   * *Note AddGroup(String:
     (String)connector-net-ref-replication-replicationmanager-addgroup2.

*See Also*

*Note ReplicationManager Class:
connector-net-ref-replication-replicationmanager.  *Note
ReplicationManager Members:
connector-net-ref-replication-replicationmanagermembers.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationmanager-addgroup1,  Next: connector-net-ref-replication-replicationmanager-addgroup2,  Prev: connector-net-ref-replication-replicationmanager-addgroup,  Up: connector-net-ref-replication-replicationmanager-addgroup

22.2.9.279 `ReplicationManager.AddGroup' Method (String, Int32)
...............................................................

Adds a Default Server Group to the list

*Syntax C#*

     public static ReplicationServerGroup AddGroup(
       string name,
       int retryTime
     )

*Syntax Visual Basic*

     Public Shared Function AddGroup ( _
       name As String, _
       retryTime As Integer _
     ) As ReplicationServerGroup

*Syntax Visual C++*

     public:
     static ReplicationServerGroup^ AddGroup(
       String^ name,
       int retryTime
     )

*Parameters*

name

Type: System.String

Group name

retryTime

Type: System.Int32

Time between reconnections for failed servers

*Return Value*

A *Note ReplicationServerGroup:
connector-net-ref-replication-replicationservergroup.  object

*See Also*

*Note ReplicationManager Class:
connector-net-ref-replication-replicationmanager.  *Note AddGroup
Overload: connector-net-ref-replication-replicationmanager-addgroup.
*Note MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationmanager-addgroup2,  Prev: connector-net-ref-replication-replicationmanager-addgroup1,  Up: connector-net-ref-replication-replicationmanager-addgroup

22.2.9.280 `ReplicationManager.AddGroup' Method (String, String, Int32)
.......................................................................

Adds a Server Group to the list

*Syntax C#*

     public static ReplicationServerGroup AddGroup(
       string name,
       string groupType,
       int retryTime
     )

*Syntax Visual Basic*

     Public Shared Function AddGroup ( _
       name As String, _
       groupType As String, _
       retryTime As Integer _
     ) As ReplicationServerGroup

*Syntax Visual C++*

     public:
     static ReplicationServerGroup^ AddGroup(
       String^ name,
       String^ groupType,
       int retryTime
     )

*Parameters*

name

Type: System.String

Group name

groupType

Type: System.String

ServerGroup type reference

retryTime

Type: System.Int32

Time between reconnections for failed servers

*Return Value*

A *Note ReplicationServerGroup:
connector-net-ref-replication-replicationservergroup.  object

*See Also*

*Note ReplicationManager Class:
connector-net-ref-replication-replicationmanager.  *Note AddGroup
Overload: connector-net-ref-replication-replicationmanager-addgroup.
*Note MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationmanager-getgroup,  Next: connector-net-ref-replication-replicationmanager-getnewconnection,  Prev: connector-net-ref-replication-replicationmanager-addgroup,  Up: connector-net-ref-replication-replicationmanagermembers

22.2.9.281 `ReplicationManager.GetGroup' Method
...............................................

Gets a Server Group by name

*Syntax C#*

     public static ReplicationServerGroup GetGroup(
     string groupName
     )

*Syntax Visual Basic*

     Public Shared Function GetGroup ( _
     groupName As String _
     ) As ReplicationServerGroup

*Syntax Visual C++*

     public:
     static ReplicationServerGroup^ GetGroup(
     String^ groupName
     )

*Parameters*

groupName

Type: System.String

Group name

*Return Value*

A *Note ReplicationServerGroup:
connector-net-ref-replication-replicationservergroup.  object

*See Also*

*Note ReplicationManager Class:
connector-net-ref-replication-replicationmanager.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationmanager-getnewconnection,  Next: connector-net-ref-replication-replicationmanager-getserver,  Prev: connector-net-ref-replication-replicationmanager-getgroup,  Up: connector-net-ref-replication-replicationmanagermembers

22.2.9.282 `ReplicationManager.GetNewConnection' Method
.......................................................

Assigns a new server driver to the connection object

*Syntax C#*

     public static void GetNewConnection(
       string groupName,
       bool master,
       MySqlConnection connection
     )

*Syntax Visual Basic*

     Public Shared Sub GetNewConnection ( _
       groupName As String, _
       master As Boolean, _
       connection As MySqlConnection _
     )

*Syntax Visual C++*

     public:
     static void GetNewConnection(
       String^ groupName,
       bool master,
       MySqlConnection^ connection
     )

*Parameters*

groupName

Type: System.String

Group name

master

Type: System.Boolean

True if the server connection to assign must be a master

connection

Type: MySql.Data.MySqlClient.MySqlConnection

MySqlConnection object where the new driver will be assigned

*See Also*

*Note ReplicationManager Class:
connector-net-ref-replication-replicationmanager.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationmanager-getserver,  Next: connector-net-ref-replication-replicationmanager-isreplicationgroup,  Prev: connector-net-ref-replication-replicationmanager-getnewconnection,  Up: connector-net-ref-replication-replicationmanagermembers

22.2.9.283 `ReplicationManager.GetServer' Method
................................................

Gets the next server from a replication group

*Syntax C#*

     public static ReplicationServer GetServer(
       string groupName,
       bool isMaster
     )

*Syntax Visual Basic*

     Public Shared Function GetServer ( _
       groupName As String, _
       isMaster As Boolean _
     ) As ReplicationServer

*Syntax Visual C++*

     public:
     static ReplicationServer^ GetServer(
       String^ groupName,
       bool isMaster
     )

*Parameters*

groupName

Type: System.String

Group name

isMaster

Type: System.Boolean

True if the server to return must be a master

*Return Value*

A *Note ReplicationServer:
connector-net-ref-replication-replicationserver.  object

*See Also*

*Note ReplicationManager Class:
connector-net-ref-replication-replicationmanager.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationmanager-isreplicationgroup,  Next: connector-net-ref-replication-replicationmanager-groups,  Prev: connector-net-ref-replication-replicationmanager-getserver,  Up: connector-net-ref-replication-replicationmanagermembers

22.2.9.284 `ReplicationManager.IsReplicationGroup' Method
.........................................................

Validates if the replication group name exists.

*Syntax C#*

     public static bool IsReplicationGroup(
       string groupName
     )

*Syntax Visual Basic*

     Public Shared Function IsReplicationGroup ( _
       groupName As String _
     ) As Boolean

*Syntax Visual C++*

     public:
     static bool IsReplicationGroup(
       String^ groupName
     )

*Parameters*

groupName

Type: System.String

Group name

*Return Value*

True if replication group name is found, otherwise false

*See Also*

*Note ReplicationManager Class:
connector-net-ref-replication-replicationmanager.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationmanager-groups,  Prev: connector-net-ref-replication-replicationmanager-isreplicationgroup,  Up: connector-net-ref-replication-replicationmanagermembers

22.2.9.285 `ReplicationManager.Groups' Property
...............................................

Returns Replication Server Group List

*Syntax C#*

     public static IList<ReplicationServerGroup> Groups { get; private set; }

*Syntax Visual Basic*

     Public Shared Property Groups As IList(Of ReplicationServerGroup)
       Get
       Private Set

*Syntax Visual C++*

     public:
     static property IList<ReplicationServerGroup^>^ Groups {
       IList<ReplicationServerGroup^>^ get ();
       private: void set (IList<ReplicationServerGroup^>^ value);
     }

*See Also*

*Note ReplicationManager Class:
connector-net-ref-replication-replicationmanager.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationroundrobinservergroup,  Next: connector-net-ref-replication-replicationserver,  Prev: connector-net-ref-replication-replicationmanager,  Up: connector-net-ref-replication

22.2.9.286 `ReplicationRoundRobinServerGroup' Class
...................................................

* Menu:

* connector-net-ref-replication-replicationroundrobinservergroupmembers::  `ReplicationRoundRobinServerGroup' Members

*Note Members:
connector-net-ref-replication-replicationroundrobinservergroupmembers.

Namespace: *Note MySql.Data.MySqlClient.Replication:
connector-net-ref-replication.

Assembly: MySql.Data (in MySql.Data.dll)

*Syntax C#*

     public class ReplicationRoundRobinServerGroup : ReplicationServerGroup

*Syntax Visual Basic*

     Public Class ReplicationRoundRobinServerGroup _
       Inherits ReplicationServerGroup

*Syntax Visual C++*

     public ref class ReplicationRoundRobinServerGroup : public ReplicationServerGroup

*See Also*

*Note ReplicationRoundRobinServerGroup Members:
connector-net-ref-replication-replicationroundrobinservergroupmembers.
*Note MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationroundrobinservergroupmembers,  Prev: connector-net-ref-replication-replicationroundrobinservergroup,  Up: connector-net-ref-replication-replicationroundrobinservergroup

22.2.9.287 `ReplicationRoundRobinServerGroup' Members
.....................................................

* Menu:

* connector-net-ref-replication-replicationroundrobinservergroup-constructor::  `ReplicationRoundRobinServerGroup' Constructor
* connector-net-ref-replication-replicationroundrobinservergroup-getserver::  GetServer Method

The *Note ReplicationRoundRobinServerGroup:
connector-net-ref-replication-replicationroundrobinservergroup.  type
exposes the following members.

*Public Instance Constructors*

Public Instance Constructors

Name                                 Description
*Note                                Initializes a new instance of the
ReplicationRoundRobinServerGroup:    *Note
connector-net-ref-replication-replicationroundrobinservergroup-constructor.ReplicationRoundRobinServerGroup:
                                     connector-net-ref-replication-replicationroundrobinservergroup.
                                     class

*Public Instance Methods*

Public Instance Methods

Name                                 Description
*Note AddServer:                     Adds a server into the group
connector-net-ref-replication-replicationservergroup-addserver.(Inherited from *Note
                                     ReplicationServerGroup:
                                     connector-net-ref-replication-replicationservergroup.)
Equals                               Determines whether the specified
                                     Object is equal to the current
                                     Object.  (Inherited from Object.)
GetHashCode                          Serves as a hash function for a
                                     particular type. (Inherited from
                                     Object.)
*Note GetServer(Boolean):            Gets an available server based on
connector-net-ref-replication-replicationroundrobinservergroup-getserver1.Round Robin load balancing
                                     (Overrides *Note
                                     ReplicationServerGroup.GetServer(Boolean):
                                     connector-net-ref-replication-replicationservergroup-getserver1.)
*Note GetServer(String):             Gets a server by name (Inherited
connector-net-ref-replication-replicationservergroup-getserver2.from *Note ReplicationServerGroup:
                                     connector-net-ref-replication-replicationservergroup.)
GetType                              Gets the Type of the current
                                     instance. (Inherited from Object.)
*Note RemoveServer:                  Removes a server from group
connector-net-ref-replication-replicationservergroup-removeserver.(Inherited from *Note
                                     ReplicationServerGroup:
                                     connector-net-ref-replication-replicationservergroup.)
ToString                             Returns a string that represents
                                     the current object. (Inherited from
                                     Object.)

*Public Instance Properties*

Public Instance Properties

Name                                 Description
*Note Name:                          (Inherited from *Note
connector-net-ref-replication-replicationroundrobinservergroup.ReplicationServerGroup:
                                     connector-net-ref-replication-replicationservergroup.)
*Note RetryTime:                     (Inherited from *Note
connector-net-ref-replication-replicationroundrobinservergroup.ReplicationServerGroup:
                                     connector-net-ref-replication-replicationservergroup.)
*Note Servers:                       (Inherited from *Note
connector-net-ref-replication-replicationroundrobinservergroup.ReplicationServerGroup:
                                     connector-net-ref-replication-replicationservergroup.)

*See Also*

*Note ReplicationRoundRobinServerGroup Class:
connector-net-ref-replication-replicationroundrobinservergroup.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationroundrobinservergroup-constructor,  Next: connector-net-ref-replication-replicationroundrobinservergroup-getserver,  Prev: connector-net-ref-replication-replicationroundrobinservergroupmembers,  Up: connector-net-ref-replication-replicationroundrobinservergroupmembers

22.2.9.288 `ReplicationRoundRobinServerGroup' Constructor
.........................................................

Initializes a new instance of the *Note
ReplicationRoundRobinServerGroup:
connector-net-ref-replication-replicationroundrobinservergroup.  class

*Syntax C#*

     public ReplicationRoundRobinServerGroup(
       string name,
       int retryTime
     )

*Syntax Visual Basic*

     Public Sub New ( _
       name As String, _
       retryTime As Integer _
     )

*Syntax Visual C++*

     public:
     ReplicationRoundRobinServerGroup(
       String^ name,
       int retryTime
     )

*Parameters*

name

Type: System.String

Server name

retryTime

Type: System.Int32

Retry time between connections to failed connections

*See Also*

*Note ReplicationRoundRobinServerGroup Class:
connector-net-ref-replication-replicationroundrobinservergroup.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationroundrobinservergroup-getserver,  Prev: connector-net-ref-replication-replicationroundrobinservergroup-constructor,  Up: connector-net-ref-replication-replicationroundrobinservergroupmembers

22.2.9.289 GetServer Method
...........................

* Menu:

* connector-net-ref-replication-replicationroundrobinservergroup-getserver1::  `ReplicationRoundRobinServerGroup.GetServer' Method (Boolean)

*Overload List*

   * *Note GetServer(Boolean):
     connector-net-ref-replication-replicationroundrobinservergroup-getserver1.

   * *Note GetServer(String):
     connector-net-ref-replication-replicationservergroup-getserver2.

*See Also*

*Note ReplicationRoundRobinServerGroup Class:
connector-net-ref-replication-replicationroundrobinservergroup.  *Note
ReplicationRoundRobinServerGroup Members:
connector-net-ref-replication-replicationroundrobinservergroupmembers.
*Note MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationroundrobinservergroup-getserver1,  Prev: connector-net-ref-replication-replicationroundrobinservergroup-getserver,  Up: connector-net-ref-replication-replicationroundrobinservergroup-getserver

22.2.9.290 `ReplicationRoundRobinServerGroup.GetServer' Method (Boolean)
........................................................................

Gets an available server based on Round Robin load balancing (Overrides
*Note ReplicationServerGroup.GetServer(Boolean):
connector-net-ref-replication-replicationservergroup-getserver1.)

*Syntax C#*

     public override ReplicationServer GetServer(
       bool isMaster
     )

*Syntax Visual Basic*

     Public Overrides Function GetServer ( _
       isMaster As Boolean _
     ) As ReplicationServer

*Syntax Visual C++*

     public:
     virtual ReplicationServer^ GetServer(
       bool isMaster
     ) override

*Parameters*

isMaster

Type: System.Boolean

True if the server to return must be a master

*Return Value*

A *Note ReplicationServer:
connector-net-ref-replication-replicationserver.  object

*See Also*

*Note ReplicationRoundRobinServerGroup Class:
connector-net-ref-replication-replicationroundrobinservergroup.  *Note
GetServer Overload:
connector-net-ref-replication-replicationroundrobinservergroup-getserver.
*Note MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationserver,  Next: connector-net-ref-replication-replicationservergroup,  Prev: connector-net-ref-replication-replicationroundrobinservergroup,  Up: connector-net-ref-replication

22.2.9.291 `ReplicationServer' Class
....................................

* Menu:

* connector-net-ref-replication-replicationservermembers::  `ReplicationServer' Members

*Note Members: connector-net-ref-replication-replicationservermembers.

Namespace: *Note MySql.Data.MySqlClient.Replication:
connector-net-ref-replication.

Assembly: MySql.Data (in `MySql.Data.dll')

*Syntax C#*

     public class ReplicationServer

*Syntax Visual Basic*

     Public Class ReplicationServer

*Syntax Visual C++*

     public ref class ReplicationServer

*See Also*

*Note ReplicationServer Members:
connector-net-ref-replication-replicationservermembers.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationservermembers,  Prev: connector-net-ref-replication-replicationserver,  Up: connector-net-ref-replication-replicationserver

22.2.9.292 `ReplicationServer' Members
......................................

* Menu:

* connector-net-ref-replication-replicationserver-constructor::  `ReplicationServer' Constructor
* connector-net-ref-replication-replicationserver-connectionstring::  `ReplicationServer.ConnectionString' Property
* connector-net-ref-replication-replicationserver-isavailable::  `ReplicationServer.IsAvailable' Property
* connector-net-ref-replication-replicationserver-ismaster::  `ReplicationServer.IsMaster' Property
* connector-net-ref-replication-replicationserver-name::  `ReplicationServer.Name' Property

The *Note ReplicationServer:
connector-net-ref-replication-replicationserver.  type exposes the
following members.

*Public Instance Constructors*

Public Instance Constructors

Name                                 Description
*Note ReplicationServer:             Initializes a new instance of the
connector-net-ref-replication-replicationserver-constructor.*Note ReplicationServer:
                                     connector-net-ref-replication-replicationserver.
                                     class

*Public Instance Methods*

Public Instance Methods

Name                                 Description
Equals                               Determines whether the specified
                                     Object is equal to the current
                                     Object.  (Inherited from Object.)
GetHashCode                          Serves as a hash function for a
                                     particular type. (Inherited from
                                     Object.)
GetType                              Gets the Type of the current
                                     instance. (Inherited from Object.)
ToString                             Returns a string that represents
                                     the current object. (Inherited from
                                     Object.)

*Public Instance Properties*

Public Instance Properties

Name                                 Description
*Note ConnectionString:              Connection string used to connect
connector-net-ref-replication-replicationserver-connectionstring.to the server
*Note IsAvailable:                   Defines if the server is available
connector-net-ref-replication-replicationserver-isavailable.to be considered in load balancing
*Note IsMaster:                      Defines if the server is master
connector-net-ref-replication-replicationserver-ismaster.(True) or slave
*Note Name:                          Server name
connector-net-ref-replication-replicationserver-name.

*See Also*

*Note ReplicationServer Class:
connector-net-ref-replication-replicationserver.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationserver-constructor,  Next: connector-net-ref-replication-replicationserver-connectionstring,  Prev: connector-net-ref-replication-replicationservermembers,  Up: connector-net-ref-replication-replicationservermembers

22.2.9.293 `ReplicationServer' Constructor
..........................................

Initializes a new instance of the *Note ReplicationServer:
connector-net-ref-replication-replicationserver.  class

*Syntax C#*

     public ReplicationServer(
       string name,
       bool isMaster,
       string connectionString
     )

*Syntax Visual Basic*

     Public Sub New ( _
       name As String, _
       isMaster As Boolean, _
       connectionString As String _
     )

*Syntax Visual C++*

     public:
     ReplicationServer(
       String^ name,
       bool isMaster,
       String^ connectionString
     )

*Parameters*

name

Type: System.String

Server name

isMaster

Type: System.Boolean

Defines if the server is master (True) or slave

connectionString

Type: System.String

Connection string used to connect to the server

*See Also*

*Note ReplicationServer Class:
connector-net-ref-replication-replicationserver.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationserver-connectionstring,  Next: connector-net-ref-replication-replicationserver-isavailable,  Prev: connector-net-ref-replication-replicationserver-constructor,  Up: connector-net-ref-replication-replicationservermembers

22.2.9.294 `ReplicationServer.ConnectionString' Property
........................................................

Connection string used to connect to the server

*Syntax C#*

     public string ConnectionString { get; private set; }

*Syntax Visual Basic*

     Public Property ConnectionString As String
       Get
       Private Set

*Syntax Visual C++*

     public:
     property String^ ConnectionString {
       String^ get ();
       private: void set (String^ value);
     }

*See Also*

*Note ReplicationServer Class:
connector-net-ref-replication-replicationserver.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationserver-isavailable,  Next: connector-net-ref-replication-replicationserver-ismaster,  Prev: connector-net-ref-replication-replicationserver-connectionstring,  Up: connector-net-ref-replication-replicationservermembers

22.2.9.295 `ReplicationServer.IsAvailable' Property
...................................................

Defines if the server is available to be considered in load balancing

*Syntax C#*

     public bool IsAvailable { get; set; }

*Syntax Visual Basic*

     Public Property IsAvailable As Boolean
       Get
       Set

*Syntax Visual C++*

     public:
     property bool IsAvailable {
       bool get ();
       void set (bool value);
     }

*See Also*

*Note ReplicationServer Class:
connector-net-ref-replication-replicationserver.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationserver-ismaster,  Next: connector-net-ref-replication-replicationserver-name,  Prev: connector-net-ref-replication-replicationserver-isavailable,  Up: connector-net-ref-replication-replicationservermembers

22.2.9.296 `ReplicationServer.IsMaster' Property
................................................

Defines if the server is master (True) or slave

*Syntax C#*

     public bool IsMaster { get; private set; }

*Syntax Visual Basic*

     Public Property IsMaster As Boolean
       Get
       Private Set

*Syntax Visual C++*

     public:
     property bool IsMaster {
       bool get ();
       private: void set (bool value);
     }

*See Also*

*Note ReplicationServer Class:
connector-net-ref-replication-replicationserver.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationserver-name,  Prev: connector-net-ref-replication-replicationserver-ismaster,  Up: connector-net-ref-replication-replicationservermembers

22.2.9.297 `ReplicationServer.Name' Property
............................................

Server name

*Syntax C#*

     public string Name { get; private set; }

*Syntax Visual Basic*

     Public Property Name As String
       Get
       Private Set

*Syntax Visual C++*

     public:
     property String^ Name {
       String^ get ();
       private: void set (String^ value);
     }

*See Also*

*Note ReplicationServer Class:
connector-net-ref-replication-replicationserver.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationservergroup,  Prev: connector-net-ref-replication-replicationserver,  Up: connector-net-ref-replication

22.2.9.298 `ReplicationServerGroup' Class
.........................................

* Menu:

* connector-net-ref-replication-replicationservergroupmembers::  `ReplicationServerGroup' Members

*Note Members:
connector-net-ref-replication-replicationservergroupmembers.

Base class used to implement load balancing features

Namespace: *Note MySql.Data.MySqlClient.Replication:
connector-net-ref-replication.

Assembly: MySql.Data (in MySql.Data.dll)

*Syntax C#*

     public abstract class ReplicationServerGroup

*Syntax Visual Basic*

     Public MustInherit Class ReplicationServerGroup

*Syntax Visual C++*

     public ref class ReplicationServerGroup abstract

*See Also*

*Note ReplicationServerGroup Members:
connector-net-ref-replication-replicationservergroupmembers.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationservergroupmembers,  Prev: connector-net-ref-replication-replicationservergroup,  Up: connector-net-ref-replication-replicationservergroup

22.2.9.299 `ReplicationServerGroup' Members
...........................................

* Menu:

* connector-net-ref-replication-replicationservergroup-constructor::  `ReplicationServerGroup' Constructor
* connector-net-ref-replication-replicationservergroup-addserver::  `ReplicationServerGroup.AddServer' Method
* connector-net-ref-replication-replicationservergroup-getserver::  GetServer Method
* connector-net-ref-replication-replicationservergroup-removeserver::  `ReplicationServerGroup.RemoveServer' Method
* connector-net-ref-replication-replicationservergroup-name::  `ReplicationServerGroup.Name' Property
* connector-net-ref-replication-replicationservergroup-retrytime::  `ReplicationServerGroup.RetryTime' Property
* connector-net-ref-replication-replicationservergroup-servers::  `ReplicationServerGroup.Servers' Property

The *Note ReplicationServerGroup:
connector-net-ref-replication-replicationservergroup.  type exposes the
following members.

*Public Instance Constructors*

Public Instance Constructors

Name                                 Description
*Note ReplicationServerGroup:        Initializes a new instance of the
connector-net-ref-replication-replicationservergroup-constructor.*Note ReplicationServerGroup:
                                     connector-net-ref-replication-replicationservergroup.
                                     class

*Public Instance Methods*

Public Instance Methods

Name                                 Description
*Note AddServer:                     Adds a server into the group
connector-net-ref-replication-replicationservergroup-addserver.
Equals                               Determines whether the specified
                                     Object is equal to the current
                                     Object.  (Inherited from Object.)
GetHashCode                          Serves as a hash function for a
                                     particular type. (Inherited from
                                     Object.)
*Note GetServer(Boolean):            Must be implemented. Defines the
connector-net-ref-replication-replicationservergroup-getserver1.next server for a custom load
                                     balancing implementation.
*Note GetServer(String):             Gets a server by name.
connector-net-ref-replication-replicationservergroup-getserver2.
GetType                              Gets the Type of the current
                                     instance. (Inherited from Object.)
*Note RemoveServer:                  Removes a server from group.
connector-net-ref-replication-replicationservergroup-removeserver.
ToString                             Returns a string that represents
                                     the current object. (Inherited from
                                     Object.)

*Public Instance Properties*

Public Instance Properties

Name                                 Description
*Note Name:                          Group name
connector-net-ref-replication-replicationservergroup-name.
*Note RetryTime:                     Retry time between connections to
connector-net-ref-replication-replicationservergroup-retrytime.failed servers
*Note Servers:                       Servers list in the group
connector-net-ref-replication-replicationservergroup-servers.

*See Also*

*Note ReplicationServerGroup Class:
connector-net-ref-replication-replicationservergroup.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationservergroup-constructor,  Next: connector-net-ref-replication-replicationservergroup-addserver,  Prev: connector-net-ref-replication-replicationservergroupmembers,  Up: connector-net-ref-replication-replicationservergroupmembers

22.2.9.300 `ReplicationServerGroup' Constructor
...............................................

Initializes a new instance of the *Note ReplicationServerGroup:
connector-net-ref-replication-replicationservergroup.  class

*Syntax C#*

     public ReplicationServerGroup(
       string name,
       int retryTime
     )

*Syntax Visual Basic*

     Public Sub New ( _
       name As String, _
       retryTime As Integer _
     )

*Syntax Visual C++*

     public:
     ReplicationServerGroup(
       String^ name,
       int retryTime
     )

*Parameters*

name

Type: System.String

Group name

retryTime

Type: System.Int32

Retry time between connections to failed servers

*See Also*

*Note ReplicationServerGroup Class:
connector-net-ref-replication-replicationservergroup.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationservergroup-addserver,  Next: connector-net-ref-replication-replicationservergroup-getserver,  Prev: connector-net-ref-replication-replicationservergroup-constructor,  Up: connector-net-ref-replication-replicationservergroupmembers

22.2.9.301 `ReplicationServerGroup.AddServer' Method
....................................................

Adds a server into the group.

*Syntax C#*

     public ReplicationServer AddServer(
       string name,
       bool isMaster,
       string connectionString
     )

*Syntax Visual Basic*

     Public Function AddServer ( _
       name As String, _
       isMaster As Boolean, _
       connectionString As String _
     ) As ReplicationServer

*Syntax Visual C++*

     public:
     ReplicationServer^ AddServer(
       String^ name,
       bool isMaster,
       String^ connectionString
     )

*Parameters*

name

Type: System.String

Server name

isMaster

Type: System.Boolean

True if the server to add is master, False for slave server

connectionString

Type: System.String

Connection string used by this server

*See Also*

*Note ReplicationServerGroup Class:
connector-net-ref-replication-replicationservergroup.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationservergroup-getserver,  Next: connector-net-ref-replication-replicationservergroup-removeserver,  Prev: connector-net-ref-replication-replicationservergroup-addserver,  Up: connector-net-ref-replication-replicationservergroupmembers

22.2.9.302 GetServer Method
...........................

* Menu:

* connector-net-ref-replication-replicationservergroup-getserver1::  `ReplicationServerGroup.GetServer' Method (Boolean)
* connector-net-ref-replication-replicationservergroup-getserver2::  `ReplicationServerGroup.GetServer' Method (String)

*Overload List*

   * *Note GetServer(Boolean):
     connector-net-ref-replication-replicationservergroup-getserver1.

   * *Note GetServer(String):
     connector-net-ref-replication-replicationservergroup-getserver2.

*See Also*

*Note ReplicationServerGroup Class:
connector-net-ref-replication-replicationservergroup.  *Note
ReplicationServerGroup Members:
connector-net-ref-replication-replicationservergroupmembers.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationservergroup-getserver1,  Next: connector-net-ref-replication-replicationservergroup-getserver2,  Prev: connector-net-ref-replication-replicationservergroup-getserver,  Up: connector-net-ref-replication-replicationservergroup-getserver

22.2.9.303 `ReplicationServerGroup.GetServer' Method (Boolean)
..............................................................

Must be implemented. Defines the next server for a custom load
balancing implementation.

*Syntax C#*

     public abstract ReplicationServer GetServer(
       bool isMaster
     )

*Syntax Visual Basic*

     Public MustOverride Function GetServer ( _
       isMaster As Boolean _
     ) As ReplicationServer

*Syntax Visual C++*

     public:
     virtual ReplicationServer^ GetServer(
       bool isMaster
     ) abstract

*Parameters*

isMaster

Type: System.Boolean

Defines if the server to return is a master or any

*Return Value*

A *Note ReplicationServer:
connector-net-ref-replication-replicationserver.  object

*See Also*

*Note ReplicationServerGroup Class:
connector-net-ref-replication-replicationservergroup.  *Note GetServer
Overload:
connector-net-ref-replication-replicationservergroup-getserver.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationservergroup-getserver2,  Prev: connector-net-ref-replication-replicationservergroup-getserver1,  Up: connector-net-ref-replication-replicationservergroup-getserver

22.2.9.304 `ReplicationServerGroup.GetServer' Method (String)
.............................................................

Gets a server by name.

*Syntax C#*

     public ReplicationServer GetServer(
       string name
     )

*Syntax Visual Basic*

     Public Function GetServer ( _
       name As String _
     ) As ReplicationServer

*Syntax Visual C++*

     public:
     ReplicationServer^ GetServer(
       String^ name
     )

*Parameters*

name

Type: System.String

Server name

*Return Value*

A *Note ReplicationServer:
connector-net-ref-replication-replicationserver.  object

*See Also*

*Note ReplicationServerGroup Class:
connector-net-ref-replication-replicationservergroup.  *Note GetServer
Overload:
connector-net-ref-replication-replicationservergroup-getserver.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationservergroup-removeserver,  Next: connector-net-ref-replication-replicationservergroup-name,  Prev: connector-net-ref-replication-replicationservergroup-getserver,  Up: connector-net-ref-replication-replicationservergroupmembers

22.2.9.305 `ReplicationServerGroup.RemoveServer' Method
.......................................................

Removes a server from group.

*Syntax C#*

     public void RemoveServer(
       string name
     )

*Syntax Visual Basic*

     Public Sub RemoveServer ( _
       name As String _
     )

*Syntax Visual C++*

     public:
     void RemoveServer(
       String^ name
     )

*Parameters*

name

Type: System.String

Server name

*See Also*

*Note ReplicationServerGroup Class:
connector-net-ref-replication-replicationservergroup.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationservergroup-name,  Next: connector-net-ref-replication-replicationservergroup-retrytime,  Prev: connector-net-ref-replication-replicationservergroup-removeserver,  Up: connector-net-ref-replication-replicationservergroupmembers

22.2.9.306 `ReplicationServerGroup.Name' Property
.................................................

Group name.

*Syntax C#*

     public string Name { get; private set; }

*Syntax Visual Basic*

     Public Property Name As String
       Get
       Private Set

*Syntax Visual C++*

     public:
     property String^ Name {
       String^ get ();
       private: void set (String^ value);
     }

*See Also*

*Note ReplicationServerGroup Class:
connector-net-ref-replication-replicationservergroup.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationservergroup-retrytime,  Next: connector-net-ref-replication-replicationservergroup-servers,  Prev: connector-net-ref-replication-replicationservergroup-name,  Up: connector-net-ref-replication-replicationservergroupmembers

22.2.9.307 `ReplicationServerGroup.RetryTime' Property
......................................................

Retry time between connections to failed servers.

*Syntax C#*

     public int RetryTime { get; private set; }

*Syntax Visual Basic*

     Public Property RetryTime As Integer
       Get
       Private Set

*Syntax Visual C++*

     public:
     property int RetryTime {
       int get ();
       private: void set (int value);
     }

*See Also*

*Note ReplicationServerGroup Class:
connector-net-ref-replication-replicationservergroup.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-ref-replication-replicationservergroup-servers,  Prev: connector-net-ref-replication-replicationservergroup-retrytime,  Up: connector-net-ref-replication-replicationservergroupmembers

22.2.9.308 `ReplicationServerGroup.Servers' Property
....................................................

Servers list in the group.

*Syntax C#*

     public IList<ReplicationServer> Servers { get; private set; }

*Syntax Visual Basic*

     Public Property Servers As IList(Of ReplicationServer)
       Get
       Private Set

*Syntax Visual C++*

     public:
     property IList<ReplicationServer^>^ Servers {
       IList<ReplicationServer^>^ get ();
       private: void set (IList<ReplicationServer^>^ value);
     }

*See Also*

*Note ReplicationServerGroup Class:
connector-net-ref-replication-replicationservergroup.  *Note
MySql.Data.MySqlClient.Replication Namespace:
connector-net-ref-replication.


File: manual.info,  Node: connector-net-support,  Next: connector-net-faq,  Prev: connector-net-ref,  Up: connector-net

22.2.10 Connector/Net Support
-----------------------------

* Menu:

* connector-net-support-community::  Connector/Net Community Support
* connector-net-support-bug-report::  How to Report Connector/Net Problems or Bugs

The developers of Connector/Net greatly value the input of our users in
the software development process. If you find Connector/Net lacking
some feature important to you, or if you discover a bug and need to
file a bug report, please use the instructions in *Note bug-reports::.


File: manual.info,  Node: connector-net-support-community,  Next: connector-net-support-bug-report,  Prev: connector-net-support,  Up: connector-net-support

22.2.10.1 Connector/Net Community Support
.........................................

   * Community support for Connector/Net can be found through the
     forums at `http://forums.mysql.com'.

   * Community support for Connector/Net can also be found through the
     mailing lists at `http://lists.mysql.com'.

   * Paid support is available from Oracle. Additional information is
     available at `http://dev.mysql.com/support/'.


File: manual.info,  Node: connector-net-support-bug-report,  Prev: connector-net-support-community,  Up: connector-net-support

22.2.10.2 How to Report Connector/Net Problems or Bugs
......................................................

If you encounter difficulties or problems with Connector/Net, contact
the Connector/Net community, as explained in *Note
connector-net-support-community::.

First try to execute the same SQL statements and commands from the
*Note `mysql': mysql. client program or from `admndemo'. This helps you
determine whether the error is in Connector/Net or MySQL.

If reporting a problem, ideally include the following information with
the email:

   * Operating system and version.

   * Connector/Net version.

   * MySQL server version.

   * Copies of error messages or other unexpected output.

   * Simple reproducible sample.

Remember that the more information you can supply to us, the more
likely it is that we can fix the problem.

If you believe the problem to be a bug, then you must report the bug
through `http://bugs.mysql.com/'.


File: manual.info,  Node: connector-net-faq,  Prev: connector-net-support,  Up: connector-net

22.2.11 Connector/Net FAQ
-------------------------

*Questions*
   * 23.2.11.1: How do I obtain the value of an auto-incremented column?

*Questions and Answers* *23.2.11.1: ** How do I obtain the value of an
auto-incremented column?  *

When using CommandBuilder, setting `ReturnGeneratedIdentifiers'
property to `true' no longer works, as CommandBuilder does not add
`last_insert_id()' by default.

CommandBuilder hooks up to the DataAdapter.RowUpdating event handler,
which means it will get called for every row. It examines the command
object and, if it is the same referenced object, it essentially
rebuilds the object, thereby destroying your command text changes.

One approach to solving this problem is to clone the command object so
you have a different actual reference:

     dataAdapter.InsertCommand = cb.GetInsertCommand().Clone()

This will work, but since the CommandBuilder is still connected to the
DataAdapter, the RowUpdating event will still fire and performance will
be hit. To stop that, once all your commands have been added you need
to disconnect the CommandBuilder from the DataAdapter:

     cb.DataAdapter = null;

The last requirement is to make sure the `id' that is returned by
`last_insert_id()' has the correct name. For example:

     SELECT last_insert_id() AS id

A complete working example is shown here:

     using System;
     using System.Collections.Generic;
     using System.Linq;
     using System.Text;

     using System.Data;
     using MySql.Data;
     using MySql.Data.MySqlClient;

     namespace GetAutoIncId
     {
         class Program
         {
             static void Main(string[] args)
             {
                 string connStr = "server=localhost;user=root;database=TestDB;port=3306;password=******;";
                 MySqlConnection conn = new MySqlConnection(connStr);

                 try
                 {
                     Console.WriteLine("Connecting to MySQL...");
                     conn.Open();

                     string sql = "SELECT * FROM TestTable";

                     MySqlDataAdapter da = new MySqlDataAdapter(sql, conn);
                     MySqlCommandBuilder cb = new MySqlCommandBuilder(da);

                     MySqlCommand cmd = new MySqlCommand();
                     cmd.Connection = conn;
                     cmd.CommandText = sql;
                     // use Cloned object to avoid .NET rebuilding the object, and
                     // thereby throwing away our command text additions.
                     MySqlCommand insertCmd = cb.GetInsertCommand().Clone();
                     insertCmd.CommandText = insertCmd.CommandText + ";SELECT last_insert_id() AS id";
                     insertCmd.UpdatedRowSource = UpdateRowSource.FirstReturnedRecord;
                     da.InsertCommand = insertCmd;
                     cb.DataAdapter = null; // Unhook RowUpdating event handler

                     DataTable dt = new DataTable();
                     da.Fill(dt);

                     DataRow row = dt.NewRow();
                     row["name"] = "Joe Smith";

                     dt.Rows.Add(row);
                     da.Update(dt);

                     System.Console.WriteLine("ID after update: " + row["id"]);
                 }
                 catch (Exception ex)
                 {
                     Console.WriteLine(ex.ToString());
                 }

                 conn.Close();
                 Console.WriteLine("Done.");
             }
         }
     }


File: manual.info,  Node: connector-j,  Next: connector-cpp,  Prev: connector-net,  Up: connectors-apis

22.3 MySQL Connector/J
======================

* Menu:

* connector-j-overview::         Overview of MySQL Connector/J
* connector-j-versions::         Connector/J Versions
* connector-j-installing::       Connector/J Installation
* connector-j-examples::         Connector/J Examples
* connector-j-reference::        Connector/J (JDBC) Reference
* connector-j-usagenotes-basic::  JDBC Concepts
* connector-j-usagenotes-j2ee-concepts-connection-pooling::  Connection Pooling with Connector/J
* connector-j-usagenotes-j2ee-concepts-managing-load-balanced-connections::  Load Balancing with Connector/J
* connector-j-usagenotes-j2ee-concepts-load-balancing-failover::  Failover with Connector/J
* connector-j-interceptors::     Using the Connector/J Interceptor Classes
* connector-j-usagenotes-tomcat::  Using Connector/J with Tomcat
* connector-j-usagenotes-jboss::  Using Connector/J with JBoss
* connector-j-usagenotes-spring-config::  Using Connector/J with Spring
* connector-j-usagenotes-glassfish-config::  Using Connector/J with GlassFish
* connector-j-usagenotes-troubleshooting::  Troubleshooting Connector/J Applications
* connector-j-usagenotes-known-issues-limitations::  Known Issues and Limitations
* connector-j-support::          Connector/J Support

This section explains how to configure and develop Java applications
with MySQL Connector/J, the JDBC driver that is integrated with MySQL.

For release notes detailing the changes in each release of Connector/J,
see MySQL Connector/J Release Notes
(http://dev.mysql.com/doc/relnotes/connector-j/en/).


File: manual.info,  Node: connector-j-overview,  Next: connector-j-versions,  Prev: connector-j,  Up: connector-j

22.3.1 Overview of MySQL Connector/J
------------------------------------

MySQL provides connectivity for client applications developed in the
Java programming language through a JDBC driver, which is called MySQL
Connector/J.

MySQL Connector/J is a JDBC Type 4 driver. Different versions are
available that are compatible with the JDBC 3.0 and JDBC 4.0
specifications. The Type 4 designation means that the driver is a pure
Java implementation of the MySQL protocol and does not rely on the
MySQL client libraries.

For large-scale programs that use common design patterns of data
access, consider using one of the popular persistence frameworks such
as Hibernate (http://www.hibernate.org/), Spring's JDBC templates
(http://www.springframework.org/) or Ibatis SQL Maps
(http://ibatis.apache.org/) to reduce the amount of JDBC code for you to
debug, tune, secure, and maintain.

* Key Topics *

   * For help with connection strings, connection options, and setting
     up your connection through JDBC, see *Note
     connector-j-reference-configuration-properties::.


File: manual.info,  Node: connector-j-versions,  Next: connector-j-installing,  Prev: connector-j-overview,  Up: connector-j

22.3.2 Connector/J Versions
---------------------------

* Menu:

* connector-j-change-history::   Connector/J Release Notes and Change History
* connector-j-versions-java::    Java Versions Supported

There are currently four versions of MySQL Connector/J available:

   * Connector/J 5.1 is the Type 4 pure Java JDBC driver, which
     conforms to the JDBC 3.0 and JDBC 4.0 specifications. It provides
     compatibility with all the functionality of MySQL, including 4.1,
     5.0, 5.1, 5.5, 5.6, and 5.7. Connector/J 5.1 provides ease of
     development features, including auto-registration with the Driver
     Manager, standardized validity checks, categorized SQLExceptions,
     support for the JDBC-4.0 XML processing, per connection client
     information, *Note `NCHAR': char, *Note `NVARCHAR': char. and
     `NCLOB' types. This release also includes all bug fixes up to and
     including Connector/J 5.0.6.

   * Connector/J 5.0 provides support for all the functionality offered
     by Connector/J 3.1 and includes distributed transaction (XA)
     support.

   * Connector/J 3.1 was designed for connectivity to MySQL 4.1 and
     MySQL 5.0 servers and provides support for all the functionality
     in MySQL 5.0 except distributed transaction (XA) support.

   * Connector/J 3.0 provides core functionality and was designed for
     connectivity to MySQL 3.x or MySQL 4.1 servers, although it
     provides basic compatibility with later versions of MySQL.
     Connector/J 3.0 does not support server-side prepared statements,
     and does not support any of the features in versions of MySQL
     later than 4.1.

The following table summarizes the Connector/J versions available,
along with the details of JDBC driver type, what version of the JDBC
API it supports, what versions of MySQL Server it works with, and
whether it is currently supported or not:

*Summary of Connector/J Versions*

Connector/J    Driver Type    JDBC version   MySQL Server   Status
version                                      version        
5.1            4              3.0, 4.0       4.1, 5.0,      Recommended
                                             5.1, 5.5,      version
                                             5.6, 5.7       
5.0            4              3.0            4.1, 5.0       Released
                                                            version
3.1            4              3.0            4.1, 5.0       Obsolete
3.0            4              3.0            3.x, 4.1       Obsolete

The current recommended version for Connector/J is 5.1. This guide
covers all four connector versions, with specific notes given where a
setting applies to a specific option.


File: manual.info,  Node: connector-j-change-history,  Next: connector-j-versions-java,  Prev: connector-j-versions,  Up: connector-j-versions

22.3.2.1 Connector/J Release Notes and Change History
.....................................................

For details of new features and bug fixes in each Connector/J release,
see the MySQL Connector/J Release Notes
(http://dev.mysql.com/doc/relnotes/connector-j/en/).


File: manual.info,  Node: connector-j-versions-java,  Prev: connector-j-change-history,  Up: connector-j-versions

22.3.2.2 Java Versions Supported
................................

The following table summarizes what version of Java RTE is required to
use Connector/J with Java applications, and what version of JDK is
required to build Connector/J source code:

*Summary of Java Versions Required by Connector/J*

Connector/J version    Java RTE required      JDK required (to
                                              build source code)
5.1                    1.5.x, 1.6.x, 1.7.x    1.6.x and 1.5.x
5.0                    1.3.x, 1.4.x, 1.5.x,   1.4.2, 1.5.x, 1.6.x
                       1.6.x                  
3.1                    1.2.x, 1.3.x, 1.4.x,   1.4.2, 1.5.x, 1.6.x
                       1.5.x, 1.6.x           
3.0                    1.2.x, 1.3.x, 1.4.x,   1.4.2, 1.5.x, 1.6.x
                       1.5.x, 1.6.x           

If you are building Connector/J from source code using the source
distribution (see *Note connector-j-installing-source::), you must use
JDK 1.4.2 or newer to compile the Connector package. For Connector/J
5.1, you must have both JDK-1.6.x and JDK-1.5.x installed to be able to
build the source code.

Java 1.7 support requires Connector/J 5.1.21 and higher. Several JDBC
4.1 methods were implemented for the first time in Connector/J 5.1.21.

Because of the implementation of java.sql.Savepoint, Connector/J 3.1.0
and newer will not run on a Java runtime older than 1.4 unless the
class verifier is turned off (by setting the `-Xverify:none' option to
the Java runtime). This is because the class verifier will try to load
the class definition for java.sql.Savepoint even though it is not
accessed by the driver unless you actually use savepoint functionality.

Caching functionality provided by Connector/J 3.1.0 or newer is also
not available on JVMs older than 1.4.x, as it relies on
java.util.LinkedHashMap which was first available in JDK-1.4.0.

MySQL Connector/J does not support JDK-1.1.x or JDK-1.0.x.


File: manual.info,  Node: connector-j-installing,  Next: connector-j-examples,  Prev: connector-j-versions,  Up: connector-j

22.3.3 Connector/J Installation
-------------------------------

* Menu:

* connector-j-binary-installation::  Installing Connector/J from a Binary Distribution
* connector-j-installing-classpath::  Installing the Driver and Configuring the `CLASSPATH'
* connector-j-installing-upgrading::  Upgrading from an Older Version
* connector-j-installing-source::  Installing from the Development Source Tree

You can install the Connector/J package using either the binary or
source distribution. The binary distribution provides the easiest
method for installation; the source distribution lets you customize
your installation further. With either solution, you manually add the
Connector/J location to your Java `CLASSPATH'.

If you are upgrading from a previous version, read the upgrade
information in *Note connector-j-installing-upgrading:: before
continuing.

Connector/J is also available as part of the Maven project. For more
information, and to download the Connector/J JAR files, see the Maven
repository (http://www.ibiblio.org/maven/).


File: manual.info,  Node: connector-j-binary-installation,  Next: connector-j-installing-classpath,  Prev: connector-j-installing,  Up: connector-j-installing

22.3.3.1 Installing Connector/J from a Binary Distribution
..........................................................

For the easiest method of installation, use the binary distribution of
the Connector/J package. The binary distribution is available either as
a tar/gzip or zip file. Extract it to a suitable location, then
optionally make the information about the package available by changing
your `CLASSPATH' (see *Note connector-j-installing-classpath::).

MySQL Connector/J is distributed as a `.zip' or `.tar.gz' archive
containing the sources, the class files, and the JAR archive named
`mysql-connector-java-VERSION-bin.jar'.

Starting with Connector/J 3.1.9, the `.class' files that constitute the
JAR files are only included as part of the driver JAR file.

Starting with Connector/J 3.1.8, the archive also includes a debug
build of the driver in a file named
`mysql-connector-java-VERSION-bin-g.jar'.  Do not use the debug build
of the driver unless instructed to do so when reporting a problem or a
bug, as it is not designed to be run in production environments, and
will have adverse performance impact when used. The debug binary also
depends on the Aspect/J runtime library, which is located in the
`src/lib/aspectjrt.jar' file that comes with the Connector/J
distribution.

Use the appropriate graphical or command-line utility to extract the
distribution (for example, WinZip for the .zip archive, and `tar' for
the .tar.gz archive). Because there are potentially long file names in
the distribution, we use the GNU tar archive format. Use GNU tar (or an
application that understands the GNU tar archive format) to unpack the
.tar.gz variant of the distribution.


File: manual.info,  Node: connector-j-installing-classpath,  Next: connector-j-installing-upgrading,  Prev: connector-j-binary-installation,  Up: connector-j-installing

22.3.3.2 Installing the Driver and Configuring the `CLASSPATH'
..............................................................

Once you have extracted the distribution archive, you can install the
driver by placing `mysql-connector-java-VERSION-bin.jar 'in your
classpath, either by adding the full path to it to your `CLASSPATH'
environment variable, or by directly specifying it with the command
line switch `-cp' when starting the JVM.

To use the driver with the JDBC `DriverManager', use
`com.mysql.jdbc.Driver' as the class that implements java.sql.Driver.

You can set the `CLASSPATH' environment variable under Unix, Linux or
Mac OS X either locally for a user within their `.profile', `.login' or
other login file. You can also set it globally by editing the global
`/etc/profile' file.

For example, add the Connector/J driver to your `CLASSPATH' using one
of the following forms, depending on your command shell:

     # Bourne-compatible shell (sh, ksh, bash, zsh):
     shell> export CLASSPATH=/path/mysql-connector-java-VER-bin.jar:$CLASSPATH

     # C shell (csh, tcsh):
     shell> setenv CLASSPATH /path/mysql-connector-java-VER-bin.jar:$CLASSPATH

Within Windows 2000, Windows XP, Windows Server 2003 and Windows Vista,
you set the environment variable through the System Control Panel.

To use MySQL Connector/J with an application server such as GlassFish,
Tomcat or JBoss, read your vendor's documentation for more information
on how to configure third-party class libraries, as most application
servers ignore the `CLASSPATH' environment variable. For configuration
examples for some J2EE application servers, see *Note
connector-j-usagenotes-j2ee-concepts-connection-pooling:: *Note
connector-j-usagenotes-j2ee-concepts-managing-load-balanced-connections::,
and *Note
connector-j-usagenotes-j2ee-concepts-load-balancing-failover::.
However, the authoritative source for JDBC connection pool
configuration information for your particular application server is the
documentation for that application server.

If you are developing servlets or JSPs, and your application server is
J2EE-compliant, you can put the driver's `.jar' file in the
`WEB-INF/lib' subdirectory of your webapp, as this is a standard
location for third party class libraries in J2EE web applications.

You can also use the MysqlDataSource or MysqlConnectionPoolDataSource
classes in the `com.mysql.jdbc.jdbc2.optional' package, if your J2EE
application server supports or requires them. Starting with Connector/J
5.0.0, the `javax.sql.XADataSource' interface is implemented using the
`com.mysql.jdbc.jdbc2.optional.MysqlXADataSource' class, which supports
XA distributed transactions when used in combination with MySQL server
version 5.0.

The various MysqlDataSource classes support the following parameters
(through standard set mutators):

   * `user'

   * `password'

   * `serverName' (see the previous section about fail-over hosts)

   * `databaseName'

   * `port'


File: manual.info,  Node: connector-j-installing-upgrading,  Next: connector-j-installing-source,  Prev: connector-j-installing-classpath,  Up: connector-j-installing

22.3.3.3 Upgrading from an Older Version
........................................

* Menu:

* connector-j-installing-upgrading-5-1::  Upgrading to MySQL Connector/J 5.1.x
* connector-j-installing-upgrading-issues::  JDBC-Specific Issues When Upgrading to MySQL Server 4.1 or Newer
* connector-j-installing-upgrading-3-0-to-3-1::  Upgrading from MySQL Connector/J 3.0 to 3.1

This section has information for users who are upgrading from one
version of Connector/J to another, or to a new version of the MySQL
server that supports a more recent level of JDBC. A newer version of
Connector/J might include changes to support new features, improve
existing functionality, or comply with new standards.


File: manual.info,  Node: connector-j-installing-upgrading-5-1,  Next: connector-j-installing-upgrading-issues,  Prev: connector-j-installing-upgrading,  Up: connector-j-installing-upgrading

22.3.3.4 Upgrading to MySQL Connector/J 5.1.x
.............................................

   * In Connector/J 5.0.x and earlier, the alias for a table in a *Note
     `SELECT': select. statement is returned when accessing the result
     set metadata using `ResultSetMetaData.getColumnName()'.  This
     behavior however is not JDBC compliant, and in Connector/J 5.1
     this behavior was changed so that the original table name, rather
     than the alias, is returned.

     The JDBC-compliant behavior is designed to let API users
     reconstruct the DML statement based on the metadata within
     `ResultSet' and `ResultSetMetaData'.

     You can get the alias for a column in a result set by calling
     `ResultSetMetaData.getColumnLabel()'.  To use the old noncompliant
     behavior with `ResultSetMetaData.getColumnName()', use the
     `useOldAliasMetadataBehavior' option and set the value to `true'.

     In Connector/J 5.0.x, the default value of
     `useOldAliasMetadataBehavior' was `true', but in Connector/J 5.1
     this was changed to a default value of `false'.


File: manual.info,  Node: connector-j-installing-upgrading-issues,  Next: connector-j-installing-upgrading-3-0-to-3-1,  Prev: connector-j-installing-upgrading-5-1,  Up: connector-j-installing-upgrading

22.3.3.5 JDBC-Specific Issues When Upgrading to MySQL Server 4.1 or Newer
.........................................................................

   * _Using the UTF-8 Character Encoding_ - Prior to MySQL server
     version 4.1, the UTF-8 character encoding was not supported by the
     server, however the JDBC driver could use it, allowing storage of
     multiple character sets in `latin1' tables on the server.

     Starting with MySQL-4.1, this functionality is deprecated.  If you
     have applications that rely on this functionality, and can not
     upgrade them to use the official Unicode character support in
     MySQL server version 4.1 or newer, add the following property to
     your connection URL:

     useOldUTF8Behavior=true

   * _Server-side Prepared Statements_ - Connector/J 3.1 will
     automatically detect and use server-side prepared statements when
     they are available (MySQL server version 4.1.0 and newer). If your
     application encounters issues with server-side prepared
     statements, you can revert to the older client-side emulated
     prepared statement code that is still presently used for MySQL
     servers older than 4.1.0 with the following connection property:

     useServerPrepStmts=false


File: manual.info,  Node: connector-j-installing-upgrading-3-0-to-3-1,  Prev: connector-j-installing-upgrading-issues,  Up: connector-j-installing-upgrading

22.3.3.6 Upgrading from MySQL Connector/J 3.0 to 3.1
....................................................

Connector/J 3.1 is designed to be backward-compatible with Connector/J
3.0 as much as possible. Major changes are isolated to new
functionality exposed in MySQL-4.1 and newer, which includes Unicode
character sets, server-side prepared statements, `SQLState' codes
returned in error messages by the server and various performance
enhancements that can be enabled or disabled using configuration
properties.

   * *Unicode Character Sets*: See the next section, as well as *Note
     charset::, for information on this MySQL feature. If you have
     something misconfigured, it will usually show up as an error with
     a message similar to `Illegal mix of collations'.

   * *Server-side Prepared Statements*: Connector/J 3.1 will
     automatically detect and use server-side prepared statements when
     they are available (MySQL server version 4.1.0 and newer).

     Starting with version 3.1.7, the driver scans SQL you are
     preparing using all variants of `Connection.prepareStatement()' to
     determine if it is a supported type of statement to prepare on the
     server side, and if it is not supported by the server, it instead
     prepares it as a client-side emulated prepared statement. You can
     disable this feature by passing `emulateUnsupportedPstmts=false'
     in your JDBC URL.

     If your application encounters issues with server-side prepared
     statements, you can revert to the older client-side emulated
     prepared statement code that is still presently used for MySQL
     servers older than 4.1.0 with the connection property
     `useServerPrepStmts=false'.

   * *Datetimes* with all-zero components (`0000-00-00 ...'): These
     values cannot be represented reliably in Java. Connector/J 3.0.x
     always converted them to `NULL' when being read from a ResultSet.

     Connector/J 3.1 throws an exception by default when these values
     are encountered, as this is the most correct behavior according to
     the JDBC and SQL standards. This behavior can be modified using the
     `zeroDateTimeBehavior' configuration property. The permissible
     values are:

        * `exception' (the default), which throws an SQLException with
          an SQLState of `S1009'.

        * `convertToNull', which returns `NULL' instead of the date.

        * `round', which rounds the date to the nearest closest value
          which is `0001-01-01'.

     Starting with Connector/J 3.1.7, `ResultSet.getString()' can be
     decoupled from this behavior using `noDatetimeStringSync=true'
     (the default value is `false') so that you can retrieve the
     unaltered all-zero value as a String. Note that this also
     precludes using any time zone conversions, therefore the driver
     will not allow you to enable `noDatetimeStringSync' and
     `useTimezone' at the same time.

   * *New SQLState Codes*: Connector/J 3.1 uses SQL:1999 SQLState codes
     returned by the MySQL server (if supported), which are different
     from the legacy X/Open state codes that Connector/J 3.0 uses.  If
     connected to a MySQL server older than MySQL-4.1.0 (the oldest
     version to return SQLStates as part of the error code), the driver
     will use a built-in mapping. You can revert to the old mapping by
     using the configuration property `useSqlStateCodes=false'.

   * *`ResultSet.getString()'*: Calling `ResultSet.getString()' on a
     *Note `BLOB': blob. column will now return the address of the
     `byte[]' array that represents it, instead of a `String'
     representation of the *Note `BLOB': blob.  *Note `BLOB': blob.
     values have no character set, so they cannot be converted to
     `java.lang.String's without data loss or corruption.

     To store strings in MySQL with LOB behavior, use one of the *Note
     `TEXT': blob. types, which the driver will treat as a
     `java.sql.Clob'.

   * *Debug builds*: Starting with Connector/J 3.1.8 a debug build of
     the driver in a file named `mysql-connector-java-VERSION-bin-g.jar'
     is shipped alongside the normal binary jar file that is named
     `mysql-connector-java-VERSION-bin.jar'.

     Starting with Connector/J 3.1.9, we do not ship the `.class' files
     unbundled, they are only available in the JAR archives that ship
     with the driver.

     Do not use the debug build of the driver unless instructed to do
     so when reporting a problem or bug, as it is not designed to be
     run in production environments, and will have adverse performance
     impact when used. The debug binary also depends on the Aspect/J
     runtime library, which is located in the `src/lib/aspectjrt.jar'
     file that comes with the Connector/J distribution.


File: manual.info,  Node: connector-j-installing-source,  Prev: connector-j-installing-upgrading,  Up: connector-j-installing

22.3.3.7 Installing from the Development Source Tree
....................................................

*Caution*:

Read this section only if you are interested in helping us test our new
code. To just get MySQL Connector/J up and running on your system, use
a standard binary release distribution.

To install MySQL Connector/J from the development source tree, make
sure that you have the following prerequisites:

   * A Bazaar client, to check out the sources from our Launchpad
     repository (available from `http://bazaar-vcs.org/').

   * Apache Ant version 1.7 or newer (available from
     `http://ant.apache.org/').

   * JDK 1.4.2 or later. Although MySQL Connector/J can be be used with
     older JDKs, compiling it from source requires at least JDK 1.4.2.
     To build Connector/J 5.1 requires JDK 1.6.x _and_ an older JDK
     such as JDK 1.5.x; point your `JAVA_HOME' environment variable at
     the older installation.

To check out and compile a specific branch of MySQL Connector/J, follow
these steps:

  1. Check out the latest code from the branch that you want with one
     of the following commands.

     The source code repository for MySQL Connector/J is located on
     Launchpad at `https://code.launchpad.net/connectorj'. To check out
     the latest development branch, use:

          shell> bzr branch lp:connectorji

     This creates a `connectorj' subdirectory in the current directory
     that contains the latest sources for the requested branch.

     To check out the latest 5.1 code, use:

          shell> bzr branch lp:connectorj/5.1

     This creates a `5.1' subdirectory in the current directory
     containing the latest 5.1 code.

  2. To build Connector/J 5.1, make sure that you have both JDK 1.6.x
     installed and an older JDK such as JDK 1.5.x. This is because
     Connector/J supports both JDBC 3.0 (which was prior to JDK 1.6.x)
     and JDBC 4.0. Set your `JAVA_HOME' environment variable to the
     path of the older JDK installation.

  3. Change your current working directory to either the `connectorj'
     or `5.1' directory, depending on which branch you intend to build.

  4. To build Connector/J 5.1, edit the `build.xml' to reflect the
     location of your JDK 1.6.x installation. The lines to change are:

                      <property name="com.mysql.jdbc.java6.javac" value="C:\jvms\jdk1.6.0\bin\javac.exe" />
                      <property name="com.mysql.jdbc.java6.rtjar" value="C:\jvms\jdk1.6.0\jre\lib\rt.jar" />

     Alternatively, you can set the value of these property names
     through the Ant `-D' option.

  5. Issue the following command to compile the driver and create a
     `.jar' file suitable for installation:

          shell> ant dist

     This creates a `build' directory in the current directory, where
     all build output will go. A directory is created in the `build'
     directory that includes the version number of the sources you are
     building from. This directory contains the sources, compiled
     `.class' files, and a `.jar' file suitable for deployment. For
     other possible targets, including ones that will create a fully
     packaged distribution, issue the following command:

          shell> ant -projecthelp

  6. A newly created `.jar' file containing the JDBC driver will be
     placed in the directory `build/mysql-connector-java-VERSION'.

     Install the newly created JDBC driver as you would a binary `.jar'
     file that you download from MySQL, by following the instructions in
     *Note connector-j-installing-classpath::.

A package containing both the binary and source code for Connector/J
5.1 can also be found at the following location: Connector/J 5.1
Download (http://dev.mysql.com/downloads/connector/j/5.1.html)


File: manual.info,  Node: connector-j-examples,  Next: connector-j-reference,  Prev: connector-j-installing,  Up: connector-j

22.3.4 Connector/J Examples
---------------------------

Examples of using Connector/J are located throughout this document.
This section provides a summary and links to these examples.

   * *Note connector-j-examples-connection-drivermanager::

   * *Note connector-j-examples-execute-select::

   * *Note connector-j-examples-stored-procedure::

   * *Note connector-j-examples-preparecall::

   * *Note connector-j-examples-output-param::

   * *Note connector-j-examples-callablestatement::

   * *Note connector-j-examples-retrieving-results-params::

   * *Note connector-j-examples-autoincrement-getgeneratedkeys::

   * *Note connector-j-examples-autoincrement-select::

   * *Note connector-j-examples-autoincrement-updateable-resultsets::

   * *Note connector-j-examples-connectionpool-j2ee::

   * *Note connector-j-examples-transaction-retry::


File: manual.info,  Node: connector-j-reference,  Next: connector-j-usagenotes-basic,  Prev: connector-j-examples,  Up: connector-j

22.3.5 Connector/J (JDBC) Reference
-----------------------------------

* Menu:

* connector-j-reference-configuration-properties::  Driver/Datasource Class Names, URL Syntax and Configuration Properties for Connector/J
* connector-j-reference-implementation-notes::  JDBC API Implementation Notes
* connector-j-reference-type-conversions::  Java, JDBC and MySQL Types
* connector-j-reference-charsets::  Using Character Sets and Unicode
* connector-j-reference-using-ssl::  Connecting Securely Using SSL
* connector-j-using-pam::        Connecting Using PAM Authentication
* connector-j-reference-replication-connection::  Using Master/Slave Replication with ReplicationConnection
* connector-j-reference-error-sqlstates::  Mapping MySQL Error Numbers to JDBC SQLState Codes

This section of the manual contains reference material for MySQL
Connector/J.


File: manual.info,  Node: connector-j-reference-configuration-properties,  Next: connector-j-reference-implementation-notes,  Prev: connector-j-reference,  Up: connector-j-reference

22.3.5.1 Driver/Datasource Class Names, URL Syntax and Configuration Properties for Connector/J
...............................................................................................

* Menu:

* connector-j-useconfigs::       Properties Files for the `useConfigs' Option

The name of the class that implements `java.sql.Driver' in MySQL
Connector/J is `com.mysql.jdbc.Driver'. The `org.gjt.mm.mysql.Driver'
class name is also usable for backward compatibility with MM.MySQL, the
predecessor of Connector/J. Use this class name when registering the
driver, or when otherwise configuring software to use MySQL Connector/J.

* JDBC URL Format *

The JDBC URL format for MySQL Connector/J is as follows, with items in
square brackets ([, ]) being optional:

     jdbc:mysql://[HOST][,FAILOVERHOST...][:PORT]/[DATABASE] »
     [?PROPERTYNAME1][=PROPERTYVALUE1][&PROPERTYNAME2][=PROPERTYVALUE2]...

If the host name is not specified, it defaults to `127.0.0.1'. If the
port is not specified, it defaults to `3306', the default port number
for MySQL servers.

     jdbc:mysql://[HOST:PORT],[HOST:PORT].../[DATABASE] »
     [?PROPERTYNAME1][=PROPERTYVALUE1][&PROPERTYNAME2][=PROPERTYVALUE2]...

Here is a sample connection URL:

     jdbc:mysql://localhost:3306/sakila?profileSQL=true

* IPv6 Connections *

For IPv6 connections, use this alternative syntax to specify hosts in
the URL, `address=(KEY=VALUE)'.  Supported keys are:

   * `(protocol=tcp)', or `(protocol=pipe)' for named pipes on Windows.

   * `(path=PATH_TO_PIPE)' for named pipes.

   * `(host=HOSTNAME)' for TCP connections.

   * `(port=PORT_NUMBER)' for TCP connections.

For example:

     jdbc:mysql://address=(protocol=tcp)(host=localhost)(port=3306)(user=test)/db

Any other parameters are treated as host-specific properties that
follow the conventions of the JDBC URL properties. This now allows
per-host overrides of any configuration property for multi-host
connections (that is, when using failover, load balancing, or
replication). Limit the overrides to user, password, network timeouts
and statement and metadata cache sizes; the results of other per-host
overrides are not defined.

* Initial Database for Connection *

If the database is not specified, the connection is made with no
default database. In this case, either call the `setCatalog()' method
on the Connection instance, or fully specify table names using the
database name (that is, `SELECT DBNAME.TABLENAME.COLNAME FROM
dbname.tablename...') in your SQL. Opening a connection without
specifying the database to use is generally only useful when building
tools that work with multiple databases, such as GUI database managers.

*Note*:

Always use the `Connection.setCatalog()' method to specify the desired
database in JDBC applications, rather than the `USE DATABASE' statement.

* Failover Support *

MySQL Connector/J has failover support. This enables the driver to fail
over to any number of slave hosts and still perform read-only queries.
Failover only happens when the connection is in an `autoCommit(true)'
state, because failover cannot happen reliably when a transaction is in
progress. Most application servers and connection pools set
`autoCommit' to `true' at the end of every transaction/connection use.

The failover functionality has the following behavior:

   * If the URL property `autoReconnect' is `false': Failover only
     happens at connection initialization, and failback occurs when the
     driver determines that the first host has become available again.

   * If the URL property `autoReconnect' is `true': Failover happens
     when the driver determines that the connection has failed (checked
     before _every_ query), and falls back to the first host when it
     determines that the host has become available again (after
     `queriesBeforeRetryMaster' queries have been issued).

In either case, whenever you are connected to a `failed-over' server,
the connection is set to read-only state, so queries that attempt to
modify data will throw exceptions (the query will *never* be processed
by the MySQL server).

* Setting Configuration Properties *

Configuration properties define how Connector/J will make a connection
to a MySQL server. Unless otherwise noted, properties can be set for a
`DataSource' object or for a `Connection' object.

Configuration properties can be set in one of the following ways:

   * Using the `set*()' methods on MySQL implementations of
     `java.sql.DataSource' (which is the preferred method when using
     implementations of `java.sql.DataSource'):

        * `com.mysql.jdbc.jdbc2.optional.MysqlDataSource'

        * `com.mysql.jdbc.jdbc2.optional.MysqlConnectionPoolDataSource'

   * As a key/value pair in the `java.util.Properties' instance passed
     to `DriverManager.getConnection()' or `Driver.connect()'

   * As a JDBC URL parameter in the URL given to
     `java.sql.DriverManager.getConnection()',
     `java.sql.Driver.connect()' or the MySQL implementations of the
     `javax.sql.DataSource' `setURL()' method.

     *Note*:

     If the mechanism you use to configure a JDBC URL is XML-based, use
     the XML character literal &amp; to separate configuration
     parameters, as the ampersand is a reserved character for XML.

The properties are listed in the following tables.

Connection/Authentication

This table lists Connector/J Connection/Authentication connection
properties.

* Property Name *      * Definition *                       *       *
                                                            Default Since
                                                            Value * Version
                                                                    *
user                   The user to connect as                       all
                                                                    versions
password               The password to use when connecting          all
                                                                    versions
socketFactory          The name of the class that the       com.mysql.jdbc.StandardSocketFactory3.0.3
                       driver should use for creating               
                       socket connections to the server.            
                       This class must implement the                
                       interface                                    
                       'com.mysql.jdbc.SocketFactory' and           
                       have public no-args constructor.             
connectTimeout         Timeout for socket connect (in       0       3.0.1
                       milliseconds), with 0 being no               
                       timeout.  Only works on JDK-1.4 or           
                       newer. Defaults to '0'.                      
socketTimeout          Timeout on network socket            0       3.0.1
                       operations (0, the default means no          
                       timeout).                                    
connectionLifecycleInterceptorsA comma-delimited list of classes            5.1.4
                       that implement                               
                       "com.mysql.jdbc.ConnectionLifecycleInterceptor"        
                       that should notified of connection           
                       lifecycle events (creation,                  
                       destruction, commit, rollback,               
                       setCatalog and setAutoCommit) and            
                       potentially alter the execution of           
                       these commands.                              
                       ConnectionLifecycleInterceptors are          
                       "stackable", more than one                   
                       interceptor may be specified via             
                       the configuration property as a              
                       comma-delimited list, with the               
                       interceptors executed in order from          
                       left to right.                               
useConfigs             Load the comma-delimited list of             3.1.5
                       configuration properties before              
                       parsing the URL or applying                  
                       user-specified properties. These             
                       configurations are explained in the          
                       'Configurations' of the                      
                       documentation.                               
authenticationPlugins  Comma-delimited list of classes              5.1.19
                       that implement                               
                       com.mysql.jdbc.AuthenticationPlugin          
                       and which will be used for                   
                       authentication unless disabled by            
                       "disabledAuthenticationPlugins"              
                       property.                                    
defaultAuthenticationPluginName of a class implementing         com.mysql.jdbc.authentication.MysqlNativePasswordPlugin5.1.19
                       com.mysql.jdbc.AuthenticationPlugin          
                       which will be used as the default            
                       authentication plugin (see below).           
                       It is an error to use a class which          
                       is not listed in                             
                       "authenticationPlugins" nor it is            
                       one of the built-in plugins. It is           
                       an error to set as default a plugin          
                       which was disabled with                      
                       "disabledAuthenticationPlugins"              
                       property. It is an error to set              
                       this value to null or the empty              
                       string (i.e.  there must be at               
                       least a valid default authentication         
                       plugin specified for the                     
                       connection, meeting all constraints          
                       listed above).                               
disabledAuthenticationPluginsComma-delimited list of classes              5.1.19
                       implementing                                 
                       com.mysql.jdbc.AuthenticationPlugin          
                       or mechanisms, i.e.                          
                       "mysql_native_password". The                 
                       authentication plugins or                    
                       mechanisms listed will not be used           
                       for authentication which will fail           
                       if it requires one of them. It is an         
                       error to disable the default                 
                       authentication plugin (either the            
                       one named by                                 
                       "defaultAuthenticationPlugin"                
                       property or the hard-coded one if            
                       "defaultAuthenticationPlugin"                
                       property is not set).                        
disconnectOnExpiredPasswordsIf "disconnectOnExpiredPasswords"    true    5.1.23
                       is set to "false" and password is            
                       expired then server enters                   
                       "sandbox" mode and sends ERR(08001,          
                       ER_MUST_CHANGE_PASSWORD) for all             
                       commands that are not needed to set          
                       a new password until a new password          
                       is set.                                      
interactiveClient      Set the CLIENT_INTERACTIVE flag,     false   3.1.0
                       which tells MySQL to timeout                 
                       connections based on                         
                       INTERACTIVE_TIMEOUT instead of               
                       WAIT_TIMEOUT                                 
localSocketAddress     Hostname or IP address given to              5.0.5
                       explicitly configure the interface           
                       that the driver will bind the                
                       client side of the TCP/IP                    
                       connection to when connecting.               
propertiesTransform    An implementation of                         3.1.4
                       com.mysql.jdbc.ConnectionPropertiesTransform        
                       that the driver will use to modify           
                       URL properties passed to the driver          
                       before attempting a connection               
useCompression         Use zlib compression when            false   3.0.17
                       communicating with the server                
                       (true/false)?  Defaults to 'false'.          

Networking

This table lists Connector/J Networking connection properties.

* Property Name *      * Definition *                       *       *
                                                            Default Since
                                                            Value * Version
                                                                    *
maxAllowedPacket       Maximum allowed packet size to send  -1      5.1.8
                       to server. If not set, the value of          
                       system variable                              
                       'max_allowed_packet' will be used to         
                       initialize this upon connecting.             
                       This value will not take effect if           
                       set larger than the value of                 
                       'max_allowed_packet'.                        
tcpKeepAlive           If connecting using TCP/IP, should   true    5.0.7
                       the driver set SO_KEEPALIVE?                 
tcpNoDelay             If connecting using TCP/IP, should   true    5.0.7
                       the driver set SO_TCP_NODELAY                
                       (disabling the Nagle Algorithm)?             
tcpRcvBuf              If connecting using TCP/IP, should   0       5.0.7
                       the driver set SO_RCV_BUF to the             
                       given value? The default value of            
                       '0', means use the platform default          
                       value for this property)                     
tcpSndBuf              If connecting using TCP/IP, should   0       5.0.7
                       the driver set SO_SND_BUF to the             
                       given value? The default value of            
                       '0', means use the platform default          
                       value for this property)                     
tcpTrafficClass        If connecting using TCP/IP, should   0       5.0.7
                       the driver set traffic class or              
                       type-of-service fields ?See the              
                       documentation for                            
                       java.net.Socket.setTrafficClass()            
                       for more information.                        

High Availability and Clustering

This table lists Connector/J High Availability and Clustering
connection properties.

* Property Name *      * Definition *                       *       *
                                                            Default Since
                                                            Value * Version
                                                                    *
autoReconnect          Should the driver try to             false   1.1
                       re-establish stale and/or dead               
                       connections? If enabled the driver           
                       will throw an exception for a                
                       queries issued on a stale or dead            
                       connection, which belong to the              
                       current transaction, but will                
                       attempt reconnect before the next            
                       query issued on the connection in a          
                       new transaction. The use of this             
                       feature is not recommended, because          
                       it has side effects related to               
                       session state and data consistency           
                       when applications don't handle               
                       SQLExceptions properly, and is only          
                       designed to be used when you are             
                       unable to configure your                     
                       application to handle SQLExceptions          
                       resulting from dead and stale                
                       connections properly.                        
                       Alternatively, as a last option,             
                       investigate setting the MySQL                
                       server variable "wait_timeout" to a          
                       high value, rather than the default          
                       of 8 hours.                                  
autoReconnectForPools  Use a reconnection strategy          false   3.1.3
                       appropriate for connection pools             
                       (defaults to 'false')                        
failOverReadOnly       When failing over in autoReconnect   true    3.0.12
                       mode, should the connection be set           
                       to 'read-only'?                              
maxReconnects          Maximum number of reconnects to      3       1.1
                       attempt if autoReconnect is true,            
                       default is '3'.                              
reconnectAtTxEnd       If autoReconnect is set to true,     false   3.0.10
                       should the driver attempt                    
                       reconnections at the end of every            
                       transaction?                                 
retriesAllDown         When using loadbalancing, the        120     5.1.6
                       number of times the driver should            
                       cycle through available hosts,               
                       attempting to connect. Between               
                       cycles, the driver will pause for            
                       250ms if no servers are available.           
initialTimeout         If autoReconnect is enabled, the     2       1.1
                       initial time to wait between                 
                       re-connect attempts (in seconds,             
                       defaults to '2').                            
roundRobinLoadBalance  When autoReconnect is enabled, and   false   3.1.2
                       failoverReadonly is false, should we         
                       pick hosts to connect to on a                
                       round-robin basis?                           
queriesBeforeRetryMasterNumber of queries to issue before    50      3.0.2
                       falling back to master when failed           
                       over (when using multi-host                  
                       failover). Whichever condition is            
                       met first,                                   
                       'queriesBeforeRetryMaster' or                
                       'secondsBeforeRetryMaster' will              
                       cause an attempt to be made to               
                       reconnect to the master. Defaults            
                       to 50.                                       
secondsBeforeRetryMasterHow long should the driver wait,     30      3.0.2
                       when failed over, before attempting          
selfDestructOnPingMaxOperations=If set to a non-zero value, the     0       5.1.6
                       driver will report close the                 
                       connection and report failure when           
                       Connection.ping() or                         
                       Connection.isValid(int) is called            
                       if the connection's count of                 
                       commands sent to the server exceeds          
                       this value.                                  
selfDestructOnPingSecondsLifetimeIf set to a non-zero value, the      0       5.1.6
                       driver will report close the                 
                       connection and report failure when           
                       Connection.ping() or                         
                       Connection.isValid(int) is called            
                       if the connection's lifetime                 
                       exceeds this value.                          
resourceId             A globally unique name that                  5.0.1
                       identifies the resource that this            
                       datasource or connection is                  
                       connected to, used for                       
                       XAResource.isSameRM() when the               
                       driver can't determine this value            
                       based on hostnames used in the URL           

Security

This table lists Connector/J Security connection properties.

* Property Name *      * Definition *                       *       *
                                                            Default Since
                                                            Value * Version
                                                                    *
allowMultiQueries      Allow the use of ';' to delimit      false   3.1.1
                       multiple queries during one                  
                       statement (true/false), defaults to          
                       'false', and does not affect the             
                       addBatch() and executeBatch()                
                       methods, which instead rely on               
                       rewriteBatchStatements.                      
useSSL                 Use SSL when communicating with the  false   3.0.2
                       server (true/false), defaults to             
                       'false'                                      
requireSSL             Require SSL connection if            false   3.1.0
                       useSSL=true? (defaults to 'false').          
verifyServerCertificateIf "useSSL" is set to "true",        true    5.1.6
                       should the driver verify the                 
                       server's certificate? When using             
                       this feature, the keystore                   
                       parameters should be specified by            
                       the "clientCertificateKeyStore*"             
                       properties, rather than system               
                       properties.                                  
clientCertificateKeyStoreUrlURL to the client certificate                5.1.0
                       KeyStore (if not specified, use              
                       defaults)                                    
clientCertificateKeyStoreTypeKeyStore type for client             JKS     5.1.0
                       certificates (NULL or empty means            
                       use the default, which is "JKS".             
                       Standard keystore types supported            
                       by the JVM are "JKS" and "PKCS12",           
                       your environment may have more               
                       available depending on what                  
                       security products are installed and          
                       available to the JVM.                        
clientCertificateKeyStorePasswordPassword for the client                      5.1.0
                       certificates KeyStore                        
trustCertificateKeyStoreUrlURL to the trusted root certificate          5.1.0
                       KeyStore (if not specified, use              
                       defaults)                                    
trustCertificateKeyStoreTypeKeyStore type for trusted root       JKS     5.1.0
                       certificates (NULL or empty means            
                       use the default, which is "JKS".             
                       Standard keystore types supported            
                       by the JVM are "JKS" and "PKCS12",           
                       your environment may have more               
                       available depending on what                  
                       security products are installed and          
                       available to the JVM.                        
trustCertificateKeyStorePasswordPassword for the trusted root                5.1.0
                       certificates KeyStore                        
allowLoadLocalInfile   Should the driver allow use of       true    3.0.3
                       'LOAD DATA LOCAL INFILE...'                  
                       (defaults to 'true').                        
allowUrlInLocalInfile  Should the driver allow URLs in      false   3.1.4
                       'LOAD DATA LOCAL INFILE' statements?         
paranoid               Take measures to prevent exposure    false   3.0.1
                       sensitive information in error               
                       messages and clear data structures           
                       holding sensitive data when                  
                       possible? (defaults to 'false')              
passwordCharacterEncodingWhat character encoding is used for          5.1.7
                       passwords? Leaving this set to the           
                       default value (null), uses the               
                       platform character set, which works          
                       for ISO8859_1 (i.e. "latin1")                
                       passwords. For passwords in other            
                       character encodings, the encoding            
                       will have to be specified with this          
                       property, as it's not possible for           
                       the driver to auto-detect this.              

Performance Extensions

This table lists Connector/J Performance Extensions connection
properties.

* Property Name *      * Definition *                       *       *
                                                            Default Since
                                                            Value * Version
                                                                    *
callableStmtCacheSize  If 'cacheCallableStmts' is enabled,  100     3.1.2
                       how many callable statements should          
                       be cached?                                   
metadataCacheSize      The number of queries to cache       50      3.1.1
                       ResultSetMetadata for if                     
                       cacheResultSetMetaData is set to             
                       'true' (default 50)                          
useLocalSessionState   Should the driver refer to the       false   3.1.7
                       internal values of autocommit and            
                       transaction isolation that are set           
                       by Connection.setAutoCommit() and            
                       Connection.setTransactionIsolation()         
                       and transaction state as maintained          
                       by the protocol, rather than                 
                       querying the database or blindly             
                       sending commands to the database             
                       for commit() or rollback() method            
                       calls?                                       
useLocalTransactionStateShould the driver use the            false   5.1.7
                       in-transaction state provided by             
                       the MySQL protocol to determine if           
                       a commit() or rollback() should              
                       actually be sent to the database?            
prepStmtCacheSize      If prepared statement caching is     25      3.0.10
                       enabled, how many prepared                   
                       statements should be cached?                 
prepStmtCacheSqlLimit  If prepared statement caching is     256     3.0.10
                       enabled, what's the largest SQL the          
                       driver will cache the parsing for?           
parseInfoCacheFactory  Name of a class implementing         com.mysql.jdbc.PerConnectionLRUFactory5.1.1
                       com.mysql.jdbc.CacheAdapterFactory,          
                       which will be used to create caches          
                       for the parsed representation of             
                       client-side prepared statements.             
serverConfigCacheFactoryName of a class implementing         com.mysql.jdbc.PerVmServerConfigCacheFactory5.1.1
                       com.mysql.jdbc.CacheAdapterFactory<String,        
                       Map<String, String>>, which will be          
                       used to create caches for MySQL              
                       server configuration values                  
alwaysSendSetIsolation Should the driver always             true    3.1.7
                       communicate with the database when           
                       Connection.setTransactionIsolation()         
                       is called? If set to false, the              
                       driver will only communicate with            
                       the database when the requested              
                       transaction isolation is different           
                       than the whichever is newer, the             
                       last value that was set via                  
                       Connection.setTransactionIsolation(),        
                       or the value that was read from the          
                       server when the connection was               
                       established. Note that                       
                       useLocalSessionState=true will               
                       force the same behavior as                   
                       alwaysSendSetIsolation=false,                
                       regardless of how                            
                       alwaysSendSetIsolation is set.               
maintainTimeStats      Should the driver maintain various   true    3.1.9
                       internal timers to enable idle time          
                       calculations as well as more                 
                       verbose error messages when the              
                       connection to the server fails?              
                       Setting this property to false               
                       removes at least two calls to                
                       System.getCurrentTimeMillis() per            
                       query.                                       
useCursorFetch         If connected to MySQL > 5.0.2, and   false   5.0.0
                       setFetchSize() > 0 on a statement,           
                       should that statement use                    
                       cursor-based fetching to retrieve            
                       rows?                                        
blobSendChunkSize      Chunk to use when sending            1048576 3.1.9
                       BLOB/CLOBs via                               
                       ServerPreparedStatements                     
cacheCallableStmts     Should the driver cache the parsing  false   3.1.2
                       stage of CallableStatements                  
cachePrepStmts         Should the driver cache the parsing  false   3.0.10
                       stage of PreparedStatements of               
                       client-side prepared statements,             
                       the "check" for suitability of               
                       server-side prepared and server-side         
                       prepared statements themselves?              
cacheResultSetMetadata Should the driver cache              false   3.1.1
                       ResultSetMetaData for Statements and         
                       PreparedStatements? (Req. JDK-1.4+,          
                       true/false, default 'false')                 
cacheServerConfigurationShould the driver cache the results  false   3.1.5
                       of 'SHOW VARIABLES' and 'SHOW                
                       COLLATION' on a per-URL basis?               
defaultFetchSize       The driver will call                 0       3.1.9
                       setFetchSize(n) with this value on           
                       all newly-created Statements                 
dontTrackOpenResources The JDBC specification requires the  false   3.1.7
                       driver to automatically track and            
                       close resources, however if your             
                       application doesn't do a good job            
                       of explicitly calling close() on             
                       statements or result sets, this can          
                       cause memory leakage. Setting this           
                       property to true relaxes this                
                       constraint, and can be more memory           
                       efficient for some applications.             
dynamicCalendars       Should the driver retrieve the       false   3.1.5
                       default calendar when required, or           
                       cache it per connection/session?             
elideSetAutoCommits    If using MySQL-4.1 or newer, should  false   3.1.3
                       the driver only issue 'set                   
                       autocommit=n' queries when the               
                       server's state doesn't match the             
                       requested state by                           
                       Connection.setAutoCommit(boolean)?           
enableQueryTimeouts    When enabled, query timeouts set     true    5.0.6
                       via Statement.setQueryTimeout() use          
                       a shared java.util.Timer instance            
                       for scheduling. Even if the timeout          
                       doesn't expire before the query is           
                       processed, there will be memory              
                       used by the TimerTask for the given          
                       timeout which won't be reclaimed             
                       until the time the timeout would             
                       have expired if it hadn't been               
                       cancelled by the driver. High-load           
                       environments might want to consider          
                       disabling this functionality.                
holdResultsOpenOverStatementCloseShould the driver close result sets  false   3.1.7
                       on Statement.close() as required by          
                       the JDBC specification?                      
largeRowSizeThreshold  What size result set row should the  2048    5.1.1
                       JDBC driver consider "large", and            
                       thus use a more memory-efficient             
                       way of representing the row                  
                       internally?                                  
loadBalanceStrategy    If using a load-balanced connection  random  5.0.6
                       to connect to SQL nodes in a MySQL           
                       Cluster/NDB configuration (by using          
                       the URL prefix                               
                       "jdbc:mysql:loadbalance://"), which          
                       load balancing algorithm should the          
                       driver use: (1) "random" - the               
                       driver will pick a random host for           
                       each request. This tends to work             
                       better than round-robin, as the              
                       randomness will somewhat account             
                       for spreading loads where requests           
                       vary in response time, while                 
                       round-robin can sometimes lead to            
                       overloaded nodes if there are                
                       variations in response times across          
                       the workload. (2)                            
                       "bestResponseTime" - the driver              
                       will route the request to the host           
                       that had the best response time for          
                       the previous transaction.                    
locatorFetchBufferSize If 'emulateLocators' is configured   1048576 3.2.1
                       to 'true', what size buffer should           
                       be used when fetching BLOB data for          
                       getBinaryInputStream?                        
rewriteBatchedStatementsShould the driver use multiqueries   false   3.1.13
                       (irregardless of the setting of              
                       "allowMultiQueries") as well as              
                       rewriting of prepared statements             
                       for INSERT into multi-value inserts          
                       when executeBatch() is called?               
                       Notice that this has the potential           
                       for SQL injection if using plain             
                       java.sql.Statements and your code            
                       doesn't sanitize input correctly.            
                       Notice that for prepared statements,         
                       server-side prepared statements can          
                       not currently take advantage of              
                       this rewrite option, and that if             
                       you don't specify stream lengths             
                       when using                                   
                       PreparedStatement.set*Stream(), the          
                       driver won't be able to determine            
                       the optimum number of parameters             
                       per batch and you might receive an           
                       error from the driver that the               
                       resultant packet is too large.               
                       Statement.getGeneratedKeys() for             
                       these rewritten statements only              
                       works when the entire batch includes         
                       INSERT statements.                           
useDirectRowUnpack     Use newer result set row unpacking   true    5.1.1
                       code that skips a copy from network          
                       buffers to a MySQL packet instance           
                       and instead reads directly into the          
                       result set row data buffers.                 
useDynamicCharsetInfo  Should the driver use a              true    5.0.6
                       per-connection cache of character            
                       set information queried from the             
                       server when necessary, or use a              
                       built-in static mapping that is              
                       more efficient, but isn't aware of           
                       custom character sets or character           
                       sets implemented after the release           
                       of the JDBC driver?                          
useFastDateParsing     Use internal                         true    5.0.5
                       String->Date/Time/Timestamp                  
                       conversion routines to avoid                 
                       excessive object creation?                   
useFastIntParsing      Use internal String->Integer         true    3.1.4
                       conversion routines to avoid                 
                       excessive object creation?                   
useJvmCharsetConvertersAlways use the character encoding    false   5.0.1
                       routines built into the JVM, rather          
                       than using lookup tables for                 
                       single-byte character sets?                  
useReadAheadInput      Use newer, optimized non-blocking,   true    3.1.5
                       buffered input stream when reading           
                       from the server?                             

Debugging/Profiling

This table lists Connector/J Debugging/Profiling connection properties.

* Property Name *      * Definition *                       *       *
                                                            Default Since
                                                            Value * Version
                                                                    *
logger                 The name of a class that implements  com.mysql.jdbc.log.StandardLogger3.1.1
                       "com.mysql.jdbc.log.Log" that will           
                       be used to log messages to.                  
                       (default is                                  
                       "com.mysql.jdbc.log.StandardLogger",         
                       which logs to STDERR)                        
gatherPerfMetrics      Should the driver gather             false   3.1.2
                       performance metrics, and report              
                       them via the configured logger               
                       every 'reportMetricsIntervalMillis'          
                       milliseconds?                                
profileSQL             Trace queries and their              false   3.1.0
                       execution/fetch times to the                 
                       configured logger (true/false)               
                       defaults to 'false'                          
profileSql             Deprecated, use 'profileSQL'                 2.0.14
                       instead. Trace queries and their             
                       execution/fetch times on STDERR              
                       (true/false) defaults to 'false'             
reportMetricsIntervalMillisIf 'gatherPerfMetrics' is enabled,   30000   3.1.2
                       how often should they be logged (in          
                       ms)?                                         
maxQuerySizeToLog      Controls the maximum length/size of  2048    3.1.3
                       a query that will get logged when            
                       profiling or tracing                         
packetDebugBufferSize  The maximum number of packets to     20      3.1.3
                       retain when 'enablePacketDebug' is           
                       true                                         
slowQueryThresholdMillisIf 'logSlowQueries' is enabled, how  2000    3.1.2
                       long should a query (in ms) before           
                       it is logged as 'slow'?                      
slowQueryThresholdNanosIf 'useNanosForElapsedTime' is set   0       5.0.7
                       to true, and this property is set to         
                       a non-zero value, the driver will            
                       use this threshold (in nanosecond            
                       units) to determine if a query was           
                       slow.                                        
useUsageAdvisor        Should the driver issue 'usage'      false   3.1.1
                       warnings advising proper and                 
                       efficient usage of JDBC and MySQL            
                       Connector/J to the log (true/false,          
                       defaults to 'false')?                        
autoGenerateTestcaseScriptShould the driver dump the SQL it    false   3.1.9
                       is executing, including server-side          
                       prepared statements to STDERR?               
autoSlowLog            Instead of using                     true    5.1.4
                       slowQueryThreshold* to determine if          
                       a query is slow enough to be                 
                       logged, maintain statistics that             
                       allow the driver to determine                
                       queries that are outside the 99th            
                       percentile?                                  
clientInfoProvider     The name of a class that implements  com.mysql.jdbc.JDBC4CommentClientInfoProvider5.1.0
                       the                                          
                       com.mysql.jdbc.JDBC4ClientInfoProvider        
                       interface in order to support                
                       JDBC-4.0's                                   
                       Connection.get/setClientInfo()               
                       methods                                      
dumpMetadataOnColumnNotFoundShould the driver dump the           false   3.1.13
                       field-level metadata of a result             
                       set into the exception message when          
                       ResultSet.findColumn() fails?                
dumpQueriesOnException Should the driver dump the contents  false   3.1.3
                       of the query sent to the server in           
                       the message for SQLExceptions?               
enablePacketDebug      When enabled, a ring-buffer of       false   3.1.3
                       'packetDebugBufferSize' packets              
                       will be kept, and dumped when                
                       exceptions are thrown in key areas           
                       in the driver's code                         
explainSlowQueries     If 'logSlowQueries' is enabled,      false   3.1.2
                       should the driver automatically              
                       issue an 'EXPLAIN' on the server             
                       and send the results to the                  
                       configured log at a WARN level?              
includeInnodbStatusInDeadlockExceptionsInclude the output of "SHOW ENGINE   false   5.0.7
                       INNODB STATUS" in exception messages         
                       when deadlock exceptions are                 
                       detected?                                    
includeThreadDumpInDeadlockExceptionsInclude a current Java thread dump   false   5.1.15
                       in exception messages when deadlock          
                       exceptions are detected?                     
includeThreadNamesAsStatementCommentInclude the name of the current      false   5.1.15
                       thread as a comment visible in "SHOW         
                       PROCESSLIST", or in Innodb deadlock          
                       dumps, useful in correlation with            
                       "includeInnodbStatusInDeadlockExceptions=true"        
                       and                                          
                       "includeThreadDumpInDeadlockExceptions=true".        
logSlowQueries         Should queries that take longer      false   3.1.2
                       than 'slowQueryThresholdMillis' be           
                       logged?                                      
logXaCommands          Should the driver log XA commands    false   5.0.5
                       sent by MysqlXaConnection to the             
                       server, at the DEBUG level of                
                       logging?                                     
profilerEventHandler   Name of a class that implements the  com.mysql.jdbc.profiler.LoggingProfilerEventHandler5.1.6
                       interface                                    
                       com.mysql.jdbc.profiler.ProfilerEventHandler        
                       that will be used to handle                  
                       profiling/tracing events.                    
resultSetSizeThreshold If the usage advisor is enabled,     100     5.0.5
                       how many rows should a result set            
                       contain before the driver warns              
                       that it is suspiciously large?               
traceProtocol          Should trace-level network protocol  false   3.1.2
                       be logged?                                   
useNanosForElapsedTime For profiling/debugging              false   5.0.7
                       functionality that measures elapsed          
                       time, should the driver try to use           
                       nanoseconds resolution if available          
                       (JDK >= 1.5)?                                

Miscellaneous

This table lists Connector/J Miscellaneous connection properties.

* Property Name *      * Definition *                       *       *
                                                            Default Since
                                                            Value * Version
                                                                    *
useUnicode             Should the driver use Unicode        true    1.1g
                       character encodings when handling            
                       strings?  Should only be used when           
                       the driver can't determine the               
                       character set mapping, or you are            
                       trying to 'force' the driver to use          
                       a character set that MySQL either            
                       doesn't natively support (such as            
                       UTF-8), true/false, defaults to              
                       'true'                                       
characterEncoding      If 'useUnicode' is set to true,              1.1g
                       what character encoding should the           
                       driver use when dealing with                 
                       strings? (defaults is to                     
                       'autodetect')                                
characterSetResults    Character set to tell the server to          3.0.13
                       return results as.                           
connectionAttributes   A comma-delimited list of                    5.1.25
                       user-defined key:value pairs (in             
                       addition to standard MySQL-defined           
                       key:value pairs) to be passed to             
                       MySQL Server for display as                  
                       connection attributes in the                 
                       PERFORMANCE_SCHEMA.SESSION_CONNECT_ATTRS        
                       table. Example usage:                        
                       connectionAttributes=key1:value1,key2:value2        
                       This functionality is available for          
                       use with MySQL Server version 5.6            
                       or later only. Earlier versions of           
                       MySQL Server do not support                  
                       connection attributes, causing this          
                       configuration option will be                 
                       ignored. Setting                             
                       connectionAttributes=none will               
                       cause connection attribute                   
                       processing to be bypassed, for               
                       situations where Connection                  
                       creation/initialization speed is             
                       critical.                                    
connectionCollation    If set, tells the server to use              3.0.13
                       this collation via 'set                      
                       collation_connection'                        
useBlobToStoreUTF8OutsideBMPTells the driver to treat            false   5.1.3
                       [MEDIUM/LONG]BLOB columns as                 
                       [LONG]VARCHAR columns holding text           
                       encoded in UTF-8 that has                    
                       characters outside the BMP (4-byte           
                       encodings), which MySQL server               
                       can't handle natively.                       
utf8OutsideBmpExcludedColumnNamePatternWhen "useBlobToStoreUTF8OutsideBMP"          5.1.3
                       is set to "true", column names               
                       matching the given regex will still          
                       be treated as BLOBs unless they              
                       match the regex specified for                
                       "utf8OutsideBmpIncludedColumnNamePattern".        
                       The regex must follow the patterns           
                       used for the java.util.regex                 
                       package.                                     
utf8OutsideBmpIncludedColumnNamePatternUsed to specify exclusion rules to           5.1.3
                       "utf8OutsideBmpExcludedColumnNamePattern".        
                       The regex must follow the patterns           
                       used for the java.util.regex                 
                       package.                                     
loadBalanceEnableJMX   Enables JMX-based management of      false   5.1.13
                       load-balanced connection groups,             
                       including live addition/removal of           
                       hosts from load-balancing pool.              
sessionVariables       A comma-separated list of                    3.1.8
                       name/value pairs to be sent as SET           
                       SESSION ...  to the server when the          
                       driver connects.                             
useColumnNamesInFindColumnPrior to JDBC-4.0, the JDBC          false   5.1.7
                       specification had a bug related to           
                       what could be given as a "column             
                       name" to ResultSet methods like              
                       findColumn(), or getters that took           
                       a String property. JDBC-4.0                  
                       clarified "column name" to mean the          
                       label, as given in an "AS" clause            
                       and returned by                              
                       ResultSetMetaData.getColumnLabel(),          
                       and if no AS clause, the column              
                       name. Setting this property to               
                       "true" will give behavior that is            
                       congruent to JDBC-3.0 and earlier            
                       versions of the JDBC specification,          
                       but which because of the                     
                       specification bug could give                 
                       unexpected results.  This property           
                       is preferred over                            
                       "useOldAliasMetadataBehavior"                
                       unless you need the specific                 
                       behavior that it provides with               
                       respect to ResultSetMetadata.                
allowNanAndInf         Should the driver allow NaN or +/-   false   3.1.5
                       INF values in                                
                       PreparedStatement.setDouble()?               
autoClosePStmtStreams  Should the driver automatically      false   3.1.12
                       call .close() on streams/readers             
                       passed as arguments via set*()               
                       methods?                                     
autoDeserialize        Should the driver automatically      false   3.1.5
                       detect and de-serialize objects              
                       stored in BLOB fields?                       
blobsAreStrings        Should the driver always treat       false   5.0.8
                       BLOBs as Strings - specifically to           
                       work around dubious metadata                 
                       returned by the server for GROUP BY          
                       clauses?                                     
capitalizeTypeNames    Capitalize type names in             true    2.0.7
                       DatabaseMetaData? (usually only              
                       useful when using WebObjects,                
                       true/false, defaults to 'false')             
clobCharacterEncoding  The character encoding to use for            5.0.0
                       sending and retrieving TEXT,                 
                       MEDIUMTEXT and LONGTEXT values               
                       instead of the configured                    
                       connection characterEncoding                 
clobberStreamingResultsThis will cause a 'streaming'        false   3.0.9
                       ResultSet to be automatically                
                       closed, and any outstanding data             
                       still streaming from the server to           
                       be discarded if another query is             
                       executed before all the data has             
                       been read from the server.                   
compensateOnDuplicateKeyUpdateCountsShould the driver compensate for     false   5.1.7
                       the update counts of "ON DUPLICATE           
                       KEY" INSERT statements (2 = 1, 0 =           
                       1) when using prepared statements?           
continueBatchOnError   Should the driver continue           true    3.0.3
                       processing batch commands if one             
                       statement fails. The JDBC spec               
                       allows either way (defaults to               
                       'true').                                     
createDatabaseIfNotExistCreates the database given in the    false   3.1.9
                       URL if it doesn't yet exist. Assumes         
                       the configured user has permissions          
                       to create databases.                         
emptyStringsConvertToZeroShould the driver allow conversions  true    3.1.8
                       from empty string fields to numeric          
                       values of '0'?                               
emulateLocators        Should the driver emulate            false   3.1.0
                       java.sql.Blobs with locators? With           
                       this feature enabled, the driver             
                       will delay loading the actual Blob           
                       data until the one of the retrieval          
                       methods (getInputStream(),                   
                       getBytes(), and so forth) on the             
                       blob data stream has been accessed.          
                       For this to work, you must use a             
                       column alias with the value of the           
                       column to the actual name of the             
                       Blob. The feature also has the               
                       following restrictions: The SELECT           
                       that created the result set must             
                       reference only one table, the table          
                       must have a primary key; the SELECT          
                       must alias the original blob column          
                       name, specified as a string, to an           
                       alternate name; the SELECT must              
                       cover all columns that make up the           
                       primary key.                                 
emulateUnsupportedPstmtsShould the driver detect prepared    true    3.1.7
                       statements that are not supported by         
                       the server, and replace them with            
                       client-side emulated versions?               
exceptionInterceptors  Comma-delimited list of classes              5.1.8
                       that implement                               
                       com.mysql.jdbc.ExceptionInterceptor.         
                       These classes will be instantiated           
                       one per Connection instance, and all         
                       SQLExceptions thrown by the driver           
                       will be allowed to be intercepted            
                       by these interceptors, in a chained          
                       fashion, with the first class                
                       listed as the head of the chain.             
functionsNeverReturnBlobsShould the driver always treat data  false   5.0.8
                       from functions returning BLOBs as            
                       Strings - specifically to work               
                       around dubious metadata returned by          
                       the server for GROUP BY clauses?             
generateSimpleParameterMetadataShould the driver generate           false   5.0.5
                       simplified parameter metadata for            
                       PreparedStatements when no metadata          
                       is available either because the              
                       server couldn't support preparing            
                       the statement, or server-side                
                       prepared statements are disabled?            
getProceduresReturnsFunctionsPre-JDBC4 DatabaseMetaData API has   true    5.1.26
                       only getProcedures() and                     
                       getProcedureColumns() methods, so            
                       they return metadata info for both           
                       stored procedures and functions.             
                       JDBC4 was extended with                      
                       getFunctions() and                           
                       getFunctionColumns() methods and             
                       the expected behaviour of previous           
                       methods is not well defined. For             
                       JDBC4 and higher, default 'true'             
                       value means that calls of                    
                       DatabaseMetaData.getProcedures() and         
                       DatabaseMetaData.getProcedureColumns()        
                       return metadata for both procedures          
                       and function, as before, keeping             
                       back compatibility. Setting this             
                       property to false allows to                  
                       decouple from pre-JDBC4 behaviour of         
                       DatabaseMetaData.getProcedures() and         
                       DatabaseMetaData.getProcedureColumns(),        
                       forcing these to return metadata             
                       for procedures only.                         
ignoreNonTxTables      Ignore non-transactional table       false   3.0.9
                       warning for rollback? (defaults to           
                       'false').                                    
jdbcCompliantTruncationShould the driver throw              true    3.1.2
                       java.sql.DataTruncation exceptions           
                       when data is truncated as is                 
                       required by the JDBC specification           
                       when connected to a server that              
                       supports warnings (MySQL 4.1.0 and           
                       newer)? This property has no effect          
                       if the server sql-mode includes              
                       STRICT_TRANS_TABLES.                         
loadBalanceAutoCommitStatementRegexWhen load-balancing is enabled for           5.1.15
                       auto-commit statements (via                  
                       loadBalanceAutoCommitStatementThreshold),        
                       the statement counter will only              
                       increment when the SQL matches the           
                       regular expression. By default,              
                       every statement issued matches.              
loadBalanceAutoCommitStatementThresholdWhen auto-commit is enabled, the     0       5.1.15
                       number of statements which should be         
                       executed before triggering                   
                       load-balancing to rebalance.                 
                       Default value of 0 causes                    
                       load-balanced connections to only            
                       rebalance when exceptions are                
                       encountered, or auto-commit is               
                       disabled and transactions are                
                       explicitly committed or rolled back.         
loadBalanceBlacklistTimeoutTime in milliseconds between checks  0       5.1.0
                       of servers which are unavailable, by         
                       controlling how long a server lives          
                       in the global blacklist.                     
loadBalanceConnectionGroupLogical group of load-balanced               5.1.13
                       connections within a classloader,            
                       used to manage different groups              
                       independently. If not specified,             
                       live management of load-balanced             
                       connections is disabled.                     
loadBalanceExceptionCheckerFully-qualified class name of        com.mysql.jdbc.StandardLoadBalanceExceptionChecker5.1.13
                       custom exception checker. The class          
                       must implement                               
                       com.mysql.jdbc.LoadBalanceExceptionChecker        
                       interface, and is used to inspect            
                       SQLExceptions and determine whether          
                       they should trigger fail-over to             
                       another host in a load-balanced              
                       deployment.                                  
loadBalancePingTimeout Time in milliseconds to wait for     0       5.1.13
                       ping response from each of                   
                       load-balanced physical connections           
                       when using load-balanced Connection.         
loadBalanceSQLExceptionSubclassFailoverComma-delimited list of                      5.1.13
                       classes/interfaces used by default           
                       load-balanced exception checker to           
                       determine whether a given                    
                       SQLException should trigger                  
                       failover. The comparison is done             
                       using                                        
                       Class.isInstance(SQLException)               
                       using the thrown SQLException.               
loadBalanceSQLStateFailoverComma-delimited list of SQLState             5.1.13
                       codes used by default load-balanced          
                       exception checker to determine               
                       whether a given SQLException should          
                       trigger failover. The SQLState of a          
                       given SQLException is evaluated to           
                       determine whether it begins with             
                       any value in the comma-delimited             
                       list.                                        
loadBalanceValidateConnectionOnSwapServerShould the load-balanced Connection  false   5.1.13
                       explicitly check whether the                 
                       connection is live when swapping to          
                       a new physical connection at                 
                       commit/rollback?                             
maxRows                The maximum number of rows to        -1      all
                       return (0, the default means return          versions
                       all rows).                                   
netTimeoutForStreamingResultsWhat value should the driver         600     5.1.0
                       automatically set the server setting         
                       'net_write_timeout' to when the              
                       streaming result sets feature is in          
                       use? (value has unit of seconds,             
                       the value '0' means the driver will          
                       not try and adjust this value)               
noAccessToProcedureBodiesWhen determining procedure           false   5.0.3
                       parameter types for                          
                       CallableStatements, and the                  
                       connected user can't access                  
                       procedure bodies through "SHOW               
                       CREATE PROCEDURE" or select on               
                       mysql.proc should the driver                 
                       instead create basic metadata (all           
                       parameters reported as IN VARCHARs,          
                       but allowing registerOutParameter()          
                       to be called on them anyway)                 
                       instead of throwing an exception?            
noDatetimeStringSync   Don't ensure that                    false   3.1.7
                       ResultSet.getDatetimeType().toString().equals(ResultSet.getString())        
noTimezoneConversionForTimeTypeDon't convert TIME values using the  false   5.0.0
                       server timezone if                           
                       'useTimezone'='true'                         
nullCatalogMeansCurrentWhen DatabaseMetadataMethods ask     true    3.1.8
                       for a 'catalog' parameter, does the          
                       value null mean use the current              
                       catalog? (this is not                        
                       JDBC-compliant, but follows legacy           
                       behavior from earlier versions of            
                       the driver)                                  
nullNamePatternMatchesAllShould DatabaseMetaData methods      true    3.1.8
                       that accept *pattern parameters              
                       treat null the same as '%' (this is          
                       not JDBC-compliant, however older            
                       versions of the driver accepted this         
                       departure from the specification)            
overrideSupportsIntegrityEnhancementFacilityShould the driver return "true" for  false   3.1.12
                       DatabaseMetaData.supportsIntegrityEnhancementFacility()        
                       even if the database doesn't                 
                       support it to workaround                     
                       applications that require this               
                       method to return "true" to signal            
                       support of foreign keys, even                
                       though the SQL specification states          
                       that this facility contains much             
                       more than just foreign key support           
                       (one such application being                  
                       OpenOffice)?                                 
padCharsWithSpace      If a result set column has the CHAR  false   5.0.6
                       type and the value does not fill the         
                       amount of characters specified in            
                       the DDL for the column, should the           
                       driver pad the remaining characters          
                       with space (for ANSI compliance)?            
pedantic               Follow the JDBC spec to the letter.  false   3.0.0
pinGlobalTxToPhysicalConnectionWhen using XAConnections, should     false   5.0.1
                       the driver ensure that operations            
                       on a given XID are always routed to          
                       the same physical connection? This           
                       allows the XAConnection to support           
                       "XA START ... JOIN" after "XA END"           
                       has been called                              
populateInsertRowWithDefaultValuesWhen using ResultSets that are       false   5.0.5
                       CONCUR_UPDATABLE, should the driver          
                       pre-populate the "insert" row with           
                       default values from the DDL for the          
                       table used in the query so those             
                       values are immediately available             
                       for ResultSet accessors? This                
                       functionality requires a call to             
                       the database for metadata each time          
                       a result set of this type is                 
                       created.  If disabled (the                   
                       default), the default values will be         
                       populated by the an internal call            
                       to refreshRow() which pulls back             
                       default values and/or values                 
                       changed by triggers.                         
processEscapeCodesForPrepStmtsShould the driver process escape     true    3.1.12
                       codes in queries that are prepared?          
queryTimeoutKillsConnectionIf the timeout given in              false   5.1.9
                       Statement.setQueryTimeout()                  
                       expires, should the driver forcibly          
                       abort the Connection instead of              
                       attempting to abort the query?               
relaxAutoCommit        If the version of MySQL the driver   false   2.0.13
                       connects to does not support                 
                       transactions, still allow calls to           
                       commit(), rollback() and                     
                       setAutoCommit() (true/false,                 
                       defaults to 'false')?                        
retainStatementAfterResultSetCloseShould the driver retain the         false   3.1.11
                       Statement reference in a ResultSet           
                       after ResultSet.close() has been             
                       called. This is not JDBC-compliant           
                       after JDBC-4.0.                              
rollbackOnPooledClose  Should the driver issue a            true    3.0.15
                       rollback() when the logical                  
                       connection in a pool is closed?              
runningCTS13           Enables workarounds for bugs in      false   3.1.7
                       Sun's JDBC compliance testsuite              
                       version 1.3                                  
serverTimezone         Override detection/mapping of                3.0.2
                       timezone. Used when timezone from            
                       server doesn't map to Java timezone          
statementInterceptors  A comma-delimited list of classes            5.1.1
                       that implement                               
                       "com.mysql.jdbc.StatementInterceptor"        
                       that should be placed "in between"           
                       query execution to influence the             
                       results. StatementInterceptors are           
                       "chainable", the results returned            
                       by the "current" interceptor will be         
                       passed on to the next in in the              
                       chain, from left-to-right order, as          
                       specified in this property.                  
strictFloatingPoint    Used only in older versions of       false   3.0.0
                       compliance test                              
strictUpdates          Should the driver do strict          true    3.0.4
                       checking (all primary keys                   
                       selected) of updatable result sets           
                       (true, false, defaults to 'true')?           
tinyInt1isBit          Should the driver treat the          true    3.0.16
                       datatype TINYINT(1) as the BIT type          
                       (because the server silently                 
                       converts BIT -> TINYINT(1) when              
                       creating tables)?                            
transformedBitIsBooleanIf the driver converts TINYINT(1)    false   3.1.9
                       to a different type, should it use           
                       BOOLEAN instead of BIT for future            
                       compatibility with MySQL-5.0, as             
                       MySQL-5.0 has a BIT type?                    
treatUtilDateAsTimestampShould the driver treat              true    5.0.5
                       java.util.Date as a TIMESTAMP for            
                       the purposes of                              
                       PreparedStatement.setObject()?               
ultraDevHack           Create PreparedStatements for        false   2.0.3
                       prepareCall() when required, because         
                       UltraDev is broken and issues a              
                       prepareCall() for _all_ statements?          
                       (true/false, defaults to 'false')            
useAffectedRows        Don't set the CLIENT_FOUND_ROWS      false   5.1.7
                       flag when connecting to the server           
                       (not JDBC-compliant, will break              
                       most applications that rely on               
                       "found" rows vs. "affected rows"             
                       for DML statements), but does cause          
                       "correct" update counts from                 
                       "INSERT ...  ON DUPLICATE KEY                
                       UPDATE" statements to be returned by         
                       the server.                                  
useGmtMillisForDatetimesConvert between session timezone     false   3.1.12
                       and GMT before creating Date and             
                       Timestamp instances (value of                
                       "false" is legacy behavior, "true"           
                       leads to more JDBC-compliant                 
                       behavior.                                    
useHostsInPrivileges   Add '@hostname' to users in          true    3.0.2
                       DatabaseMetaData.getColumn/TablePrivileges()        
                       (true/false), defaults to 'true'.            
useInformationSchema   When connected to MySQL-5.0.7 or     false   5.0.0
                       newer, should the driver use the             
                       INFORMATION_SCHEMA to derive                 
                       information used by                          
                       DatabaseMetaData?                            
useJDBCCompliantTimezoneShiftShould the driver use                false   5.0.0
                       JDBC-compliant rules when converting         
                       TIME/TIMESTAMP/DATETIME values'              
                       timezone information for those JDBC          
                       arguments which take a                       
                       java.util.Calendar argument?                 
                       (Notice that this option is                  
                       exclusive of the "useTimezone=true"          
                       configuration option.)                       
useLegacyDatetimeCode  Use code for                         true    5.1.6
                       DATE/TIME/DATETIME/TIMESTAMP                 
                       handling in result sets and                  
                       statements that consistently                 
                       handles timezone conversions from            
                       client to server and back again, or          
                       use the legacy code for these                
                       datatypes that has been in the               
                       driver for backwards-compatibility?          
useOldAliasMetadataBehaviorShould the driver use the legacy     false   5.0.4
                       behavior for "AS" clauses on columns         
                       and tables, and only return aliases          
                       (if any) for                                 
                       ResultSetMetaData.getColumnName() or         
                       ResultSetMetaData.getTableName()             
                       rather than the original                     
                       column/table name? In 5.0.x, the             
                       default value was true.                      
useOldUTF8Behavior     Use the UTF-8 behavior the driver    false   3.1.6
                       did when communicating with 4.0 and          
                       older servers                                
useOnlyServerErrorMessagesDon't prepend 'standard' SQLState    true    3.0.15
                       error messages to error messages             
                       returned by the server.                      
useSSPSCompatibleTimezoneShiftIf migrating from an environment     false   5.0.5
                       that was using server-side prepared          
                       statements, and the configuration            
                       property                                     
                       "useJDBCCompliantTimeZoneShift" set          
                       to "true", use compatible behavior           
                       when not using server-side prepared          
                       statements when sending TIMESTAMP            
                       values to the MySQL server.                  
useServerPrepStmts     Use server-side prepared statements  false   3.1.0
                       if the server supports them?                 
useSqlStateCodes       Use SQL Standard state codes         true    3.1.3
                       instead of 'legacy' X/Open/SQL               
                       state codes (true/false), default            
                       is 'true'                                    
useStreamLengthsInPrepStmtsHonor stream length parameter in     true    3.0.2
                       PreparedStatement/ResultSet.setXXXStream()        
                       method calls (true/false, defaults           
                       to 'true')?                                  
useTimezone            Convert time/date types between      false   3.0.2
                       client and server timezones                  
                       (true/false, defaults to 'false')?           
useUnbufferedInput     Don't use BufferedInputStream for    true    3.0.11
                       reading data from the server                 
yearIsDateType         Should the JDBC driver treat the     true    3.1.9
                       MySQL type "YEAR" as a                       
                       java.sql.Date, or as a SHORT?                
zeroDateTimeBehavior   What should happen when the driver   exception3.1.4
                       encounters DATETIME values that are          
                       composed entirely of zeros (used by          
                       MySQL to represent invalid dates)?           
                       Valid values are "exception",                
                       "round" and "convertToNull".                 

Connector/J also supports access to MySQL using named pipes on Windows
NT, Windows 2000, or Windows XP using the `NamedPipeSocketFactory' as a
plugin-socket factory using the `socketFactory' property. If you do not
use a `namedPipePath' property, the default of `'\\.\pipe\MySQL'' is
used. If you use the `NamedPipeSocketFactory', the host name and port
number values in the JDBC url are ignored. To enable this feature, use:

     socketFactory=com.mysql.jdbc.NamedPipeSocketFactory

Named pipes only work when connecting to a MySQL server on the same
physical machine where the JDBC driver is running. In simple
performance tests, named pipe access is between 30%-50% faster than the
standard TCP/IP access. However, this varies per system, and named
pipes are slower than TCP/IP in many Windows configurations.

To create your own socket factories, follow the example code in
com.mysql.jdbc.NamedPipeSocketFactory, or
com.mysql.jdbc.StandardSocketFactory.


File: manual.info,  Node: connector-j-useconfigs,  Prev: connector-j-reference-configuration-properties,  Up: connector-j-reference-configuration-properties

22.3.5.2 Properties Files for the `useConfigs' Option
.....................................................

The `useConfigs' connection option is convenient shorthand for
specifying combinations of options for particular scenarios. The
argument values you can use with this option correspond to the names of
`.properties' files within the Connector/J
`mysql-connector-java-VERSION-bin.jar' JAR file. For example, the
Connector/J 5.1.9 driver includes the following configuration
properties files:

     $ unzip mysql-connector-java-5.1.19-bin.jar '*/configs/*'
     Archive:  mysql-connector-java-5.1.19-bin.jar
        creating: com/mysql/jdbc/configs/
       inflating: com/mysql/jdbc/configs/3-0-Compat.properties
       inflating: com/mysql/jdbc/configs/5-0-Compat.properties
       inflating: com/mysql/jdbc/configs/clusterBase.properties
       inflating: com/mysql/jdbc/configs/coldFusion.properties
       inflating: com/mysql/jdbc/configs/fullDebug.properties
       inflating: com/mysql/jdbc/configs/maxPerformance.properties
       inflating: com/mysql/jdbc/configs/solarisMaxPerformance.properties

To specify one of these combinations of options, specify
`useConfigs=3-0-Compat', `useConfigs=maxPerformance', and so on. The
following sections show the options that are part of each `useConfigs'
setting. For the details of why each one is included, see the comments
in the `.properties' files.

* 3-0-Compat *

     emptyStringsConvertToZero=true
     jdbcCompliantTruncation=false
     noDatetimeStringSync=true
     nullCatalogMeansCurrent=true
     nullNamePatternMatchesAll=true
     transformedBitIsBoolean=false
     dontTrackOpenResources=true
     zeroDateTimeBehavior=convertToNull
     useServerPrepStmts=false
     autoClosePStmtStreams=true
     processEscapeCodesForPrepStmts=false
     useFastDateParsing=false
     populateInsertRowWithDefaultValues=false
     useDirectRowUnpack=false

* 5-0-Compat *

     useDirectRowUnpack=false

* clusterBase *

     autoReconnect=true
     failOverReadOnly=false
     roundRobinLoadBalance=true

* coldFusion *

     useDynamicCharsetInfo=false
     alwaysSendSetIsolation=false
     useLocalSessionState=true
     autoReconnect=true

* fullDebug *

     profileSQL=true
     gatherPerMetrics=true
     useUsageAdvisor=true
     logSlowQueries=true
     explainSlowQueries=true

* maxPerformance *

     cachePrepStmts=true
     cacheCallableStmts=true
     cacheServerConfiguration=true
     useLocalSessionState=true
     elideSetAutoCommits=true
     alwaysSendSetIsolation=false
     enableQueryTimeouts=false

* solarisMaxPerformance *

     useUnbufferedInput=false
     useReadAheadInput=false
     maintainTimeStats=false


File: manual.info,  Node: connector-j-reference-implementation-notes,  Next: connector-j-reference-type-conversions,  Prev: connector-j-reference-configuration-properties,  Up: connector-j-reference

22.3.5.3 JDBC API Implementation Notes
......................................

MySQL Connector/J passes all of the tests in the publicly available
version of Sun's JDBC compliance test suite. This section gives details
on a interface-by-interface level about implementation decisions that
might affect how you code applications with MySQL Connector/J. The JDBC
specification is vague about how certain functionality should be
implemented, or the specification enables leeway in implementation.

   * *BLOB*

     Starting with Connector/J version 3.1.0, you can emulate BLOBs
     with locators by adding the property `emulateLocators=true' to
     your JDBC URL.  Using this method, the driver will delay loading
     the actual BLOB data until you retrieve the other data and then use
     retrieval methods (`getInputStream()', `getBytes()', and so forth)
     on the BLOB data stream.

     You must use a column alias with the value of the column to the
     actual name of the BLOB, for example:

          SELECT id, 'data' as blob_data from blobtable

     You must also follow these rules:

        * The *Note `SELECT': select. must reference only one table.
          The table must have a primary key.

        * The *Note `SELECT': select. must alias the original BLOB
          column name, specified as a string, to an alternate name.

        * The *Note `SELECT': select. must cover all columns that make
          up the primary key.

     The BLOB implementation does not allow in-place modification (they
     are copies, as reported by the
     `DatabaseMetaData.locatorsUpdateCopies()' method). Because of
     this, use the corresponding `PreparedStatement.setBlob()' or
     `ResultSet.updateBlob()' (in the case of updatable result sets)
     methods to save changes back to the database.

   * *CallableStatement*

     Starting with Connector/J 3.1.1, stored procedures are supported
     when connecting to MySQL version 5.0 or newer using the
     CallableStatement interface. Currently, the
     `getParameterMetaData()' method of CallableStatement is not
     supported.

   * *CLOB*

     The CLOB implementation does not allow in-place modification (they
     are copies, as reported by the
     `DatabaseMetaData.locatorsUpdateCopies()' method). Because of
     this, use the `PreparedStatement.setClob()' method to save changes
     back to the database. The JDBC API does not have a
     `ResultSet.updateClob()' method.

   * *Connection*

     Unlike the pre-Connector/J JDBC driver (`MM.MySQL'), the
     `isClosed()' method does not ping the server to determine if it is
     available. In accordance with the JDBC specification, it only
     returns true if `closed()' has been called on the connection. If
     you need to determine if the connection is still valid, issue a
     simple query, such as `SELECT 1'. The driver will throw an
     exception if the connection is no longer valid.

   * *DatabaseMetaData*

     Foreign key information (`getImportedKeys()'/`getExportedKeys()'
     and `getCrossReference()') is only available from *Note `InnoDB':
     innodb-storage-engine. tables.  The driver uses *Note `SHOW CREATE
     TABLE': show-create-table. to retrieve this information, so if any
     other storage engines add support for foreign keys, the driver
     would transparently support them as well.

   * *PreparedStatement*

     PreparedStatements are implemented by the driver, as MySQL does
     not have a prepared statement feature. Because of this, the driver
     does not implement `getParameterMetaData()' or `getMetaData()' as
     it would require the driver to have a complete SQL parser in the
     client.

     Starting with version 3.1.0 MySQL Connector/J, server-side
     prepared statements and binary-encoded result sets are used when
     the server supports them.

     Take care when using a server-side prepared statement with *large*
     parameters that are set using `setBinaryStream()',
     `setAsciiStream()', `setUnicodeStream()', `setBlob()', or
     `setClob()'. To re-execute the statement with any large parameter
     changed to a nonlarge parameter, call `clearParameters()' and set
     all parameters again. The reason for this is as follows:

        * During both server-side prepared statements and client-side
          emulation, large data is exchanged only when
          `PreparedStatement.execute()' is called.

        * Once that has been done, the stream used to read the data on
          the client side is closed (as per the JDBC spec), and cannot
          be read from again.

        * If a parameter changes from large to nonlarge, the driver
          must reset the server-side state of the prepared statement to
          allow the parameter that is being changed to take the place
          of the prior large value. This removes all of the large data
          that has already been sent to the server, thus requiring the
          data to be re-sent, using the `setBinaryStream()',
          `setAsciiStream()', `setUnicodeStream()', `setBlob()' or
          `setClob()' method.

     Consequently, to change the type of a parameter to a nonlarge one,
     you must call `clearParameters()' and set all parameters of the
     prepared statement again before it can be re-executed.

   * *ResultSet*

     By default, ResultSets are completely retrieved and stored in
     memory. In most cases this is the most efficient way to operate,
     and due to the design of the MySQL network protocol is easier to
     implement. If you are working with ResultSets that have a large
     number of rows or large values, and cannot allocate heap space in
     your JVM for the memory required, you can tell the driver to
     stream the results back one row at a time.

     To enable this functionality, create a `Statement' instance in the
     following manner:

          stmt = conn.createStatement(java.sql.ResultSet.TYPE_FORWARD_ONLY,
                        java.sql.ResultSet.CONCUR_READ_ONLY);
          stmt.setFetchSize(Integer.MIN_VALUE);

     The combination of a forward-only, read-only result set, with a
     fetch size of `Integer.MIN_VALUE' serves as a signal to the driver
     to stream result sets row-by-row. After this, any result sets
     created with the statement will be retrieved row-by-row.

     There are some caveats with this approach. You must read all of
     the rows in the result set (or close it) before you can issue any
     other queries on the connection, or an exception will be thrown.

     The earliest the locks these statements hold can be released
     (whether they be `MyISAM' table-level locks or row-level locks in
     some other storage engine such as `InnoDB') is when the statement
     completes.

     If the statement is within scope of a transaction, then locks are
     released when the transaction completes (which implies that the
     statement needs to complete first). As with most other databases,
     statements are not complete until all the results pending on the
     statement are read or the active result set for the statement is
     closed.

     Therefore, if using streaming results, process them as quickly as
     possible if you want to maintain concurrent access to the tables
     referenced by the statement producing the result set.

   * *ResultSetMetaData*

     The `isAutoIncrement()' method only works when using MySQL servers
     4.0 and newer.

   * *Statement*

     When using versions of the JDBC driver earlier than 3.2.1, and
     connected to server versions earlier than 5.0.3, the
     `setFetchSize()' method has no effect, other than to toggle result
     set streaming as described above.

     Connector/J 5.0.0 and later include support for both
     `Statement.cancel()' and `Statement.setQueryTimeout()'. Both
     require MySQL 5.0.0 or newer server, and require a separate
     connection to issue the *Note `KILL QUERY': kill.  statement. In
     the case of `setQueryTimeout()', the implementation creates an
     additional thread to handle the timeout functionality.

     *Note*:

     Failures to cancel the statement for `setQueryTimeout()' may
     manifest themselves as `RuntimeException' rather than failing
     silently, as there is currently no way to unblock the thread that
     is executing the query being cancelled due to timeout expiration
     and have it throw the exception instead.

     *Note*:

     The MySQL statement *Note `KILL QUERY': kill.  (which is what the
     driver uses to implement `Statement.cancel()') is
     non-deterministic; thus, avoid the use of `Statement.cancel()' if
     possible. If no query is in process, the next query issued will be
     killed by the server. This race condition is guarded against as of
     Connector/J 5.1.18.

     MySQL does not support SQL cursors, and the JDBC driver doesn't
     emulate them, so `setCursorName()' has no effect.

     Connector/J 5.1.3 and later include two additional methods:

        * `setLocalInfileInputStream()' sets an `InputStream' instance
          that will be used to send data to the MySQL server for a
          *Note `LOAD DATA LOCAL INFILE': load-data. statement rather
          than a `FileInputStream' or `URLInputStream' that represents
          the path given as an argument to the statement.

          This stream will be read to completion upon execution of a
          *Note `LOAD DATA LOCAL INFILE': load-data. statement, and
          will automatically be closed by the driver, so it needs to be
          reset before each call to `execute*()' that would cause the
          MySQL server to request data to fulfill the request for *Note
          `LOAD DATA LOCAL INFILE': load-data.

          If this value is set to `NULL', the driver will revert to
          using a `FileInputStream' or `URLInputStream' as required.

        * `getLocalInfileInputStream()' returns the `InputStream'
          instance that will be used to send data in response to a
          *Note `LOAD DATA LOCAL INFILE': load-data. statement.

          This method returns `NULL' if no such stream has been set
          using `setLocalInfileInputStream()'.


File: manual.info,  Node: connector-j-reference-type-conversions,  Next: connector-j-reference-charsets,  Prev: connector-j-reference-implementation-notes,  Up: connector-j-reference

22.3.5.4 Java, JDBC and MySQL Types
...................................

MySQL Connector/J is flexible in the way it handles conversions between
MySQL data types and Java data types.

In general, any MySQL data type can be converted to a
`java.lang.String', and any numeric type can be converted to any of the
Java numeric types, although round-off, overflow, or loss of precision
may occur.

*Note*:

All `TEXT' types return `Types.LONGVARCHAR' with different
`getPrecision()' values (65535, 255, 16777215, and 2147483647
respectively) with `getColumnType()' returning `-1'. This behavior is
intentional even though `TINYTEXT' does not fall, regarding to its
size, within the `LONGVARCHAR' category.  This is to avoid different
handling inside the same base type.  And `getColumnType()' returns `-1'
because the internal server handling is of type `TEXT', which is
similar to `BLOB'.

Also note that `getColumnTypeName()' will return `VARCHAR' even though
`getColumnType()' returns `Types.LONGVARCHAR', because `VARCHAR' is the
designated column database-specific name for this type.

Starting with Connector/J 3.1.0, the JDBC driver issues warnings or
throws `DataTruncation' exceptions as is required by the JDBC
specification unless the connection was configured not to do so by
using the property `jdbcCompliantTruncation' and setting it to `false'.

The conversions that are always guaranteed to work are listed in the
following table. The first column lists one or more MySQL data types,
and the second column lists one or more Java types to which the MySQL
types can be converted.

*Connection Properties - Miscellaneous*

These MySQL Data Types               Can always be converted to these
                                     Java types
`CHAR, VARCHAR, BLOB, TEXT, ENUM,    `java.lang.String,
and SET'                             java.io.InputStream, java.io.Reader,
                                     java.sql.Blob, java.sql.Clob'
`FLOAT, REAL, DOUBLE PRECISION,      `java.lang.String, java.lang.Short,
NUMERIC, DECIMAL, TINYINT,           java.lang.Integer, java.lang.Long,
SMALLINT, MEDIUMINT, INTEGER,        java.lang.Double,
BIGINT'                              java.math.BigDecimal'
`DATE, TIME, DATETIME, TIMESTAMP'    `java.lang.String, java.sql.Date,
                                     java.sql.Timestamp'

*Note*:

Round-off, overflow or loss of precision may occur if you choose a Java
numeric data type that has less precision or capacity than the MySQL
data type you are converting to/from.

The ResultSet.getObject() method uses the type conversions between
MySQL and Java types, following the JDBC specification where
appropriate. The value returned by
ResultSetMetaData.GetColumnClassName() is also shown below. For more
information on the `java.sql.Types' classes see Java 2 Platform Types
(http://java.sun.com/j2se/1.4.2/docs/api/java/sql/Types.html).

*MySQL Types to Java Types for ResultSet.getObject()*

MySQL Type Name    Return value of    Returned as Java Class
                   `GetColumnClassName'
`BIT(1)' (new in   `BIT'              java.lang.Boolean
MySQL-5.0)                            
`BIT( > 1)' (new   `BIT'              byte[]
in MySQL-5.0)                         
`TINYINT'          `TINYINT'          java.lang.Boolean if the
                                      configuration property
                                      `tinyInt1isBit' is set to `true'
                                      (the default) and the storage size
                                      is 1, or java.lang.Integer if not.
`BOOL', `BOOLEAN'  `TINYINT'          See `TINYINT', above as these are
                                      aliases for `TINYINT(1)', currently.
`SMALLINT[(M)]     `SMALLINT          java.lang.Integer (regardless if
[UNSIGNED]'        [UNSIGNED]'        `UNSIGNED' or not)
`MEDIUMINT[(M)]    `MEDIUMINT         java.lang.Integer, if `UNSIGNED'
[UNSIGNED]'        [UNSIGNED]'        java.lang.Long (C/J 3.1 and
                                      earlier), or java.lang.Integer for
                                      C/J 5.0 and later
`INT,INTEGER[(M)]  `INTEGER           java.lang.Integer, if `UNSIGNED'
[UNSIGNED]'        [UNSIGNED]'        java.lang.Long
`BIGINT[(M)]       `BIGINT            java.lang.Long, if UNSIGNED
[UNSIGNED]'        [UNSIGNED]'        java.math.BigInteger
`FLOAT[(M,D)]'     `FLOAT'            java.lang.Float
`DOUBLE[(M,B)]'    `DOUBLE'           java.lang.Double
`DECIMAL[(M[,D])]' `DECIMAL'          java.math.BigDecimal
`DATE'             `DATE'             java.sql.Date
`DATETIME'         `DATETIME'         java.sql.Timestamp
`TIMESTAMP[(M)]'   `TIMESTAMP'        java.sql.Timestamp
`TIME'             `TIME'             java.sql.Time
`YEAR[(2|4)]'      `YEAR'             If `yearIsDateType' configuration
                                      property is set to `false', then
                                      the returned object type is
                                      java.sql.Short. If set to `true'
                                      (the default), then the returned
                                      object is of type java.sql.Date
                                      with the date
                                      
                                      set to January 1st, at midnight.
`CHAR(M)'          `CHAR'             java.lang.String (unless the
                                      character set for the column is
                                      `BINARY', then byte[] is returned.
`VARCHAR(M)        `VARCHAR'          java.lang.String (unless the
[BINARY]'                             character set for the column is
                                      `BINARY', then byte[] is returned.
`BINARY(M)'        `BINARY'           byte[]
`VARBINARY(M)'     `VARBINARY'        byte[]
`TINYBLOB'         `TINYBLOB'         byte[]
`TINYTEXT'         `VARCHAR'          java.lang.String
`BLOB'             `BLOB'             byte[]
`TEXT'             `VARCHAR'          java.lang.String
`MEDIUMBLOB'       `MEDIUMBLOB'       byte[]
`MEDIUMTEXT'       `VARCHAR'          java.lang.String
`LONGBLOB'         `LONGBLOB'         byte[]
`LONGTEXT'         `VARCHAR'          java.lang.String
`ENUM('value1','value2',...)'`CHAR'             java.lang.String
`SET('value1','value2',...)'`CHAR'             java.lang.String


File: manual.info,  Node: connector-j-reference-charsets,  Next: connector-j-reference-using-ssl,  Prev: connector-j-reference-type-conversions,  Up: connector-j-reference

22.3.5.5 Using Character Sets and Unicode
.........................................

All strings sent from the JDBC driver to the server are converted
automatically from native Java Unicode form to the client character
encoding, including all queries sent using `Statement.execute()',
`Statement.executeUpdate()', `Statement.executeQuery()' as well as all
PreparedStatement and CallableStatement parameters with the exclusion
of parameters set using `setBytes()', `setBinaryStream()',
`setAsciiStream()', `setUnicodeStream()' and `setBlob()'.

* Number of Encodings Per Connection *

In MySQL Server 4.1 and higher, Connector/J supports a single character
encoding between client and server, and any number of character
encodings for data returned by the server to the client in ResultSets.

Prior to MySQL Server 4.1, Connector/J supported a single character
encoding per connection, which could either be automatically detected
from the server configuration, or could be configured by the user
through the useUnicode and characterEncoding properties.

* Setting the Character Encoding *

The character encoding between client and server is automatically
detected upon connection. You specify the encoding on the server using
the `character_set_server' for server versions 4.1.0 and newer, and
`character_set' system variable for server versions older than 4.1.0.
The driver automatically uses the encoding specified by the server. For
more information, see *Note charset-server::.

For example, to use 4-byte UTF-8 character sets with Connector/J,
configure the MySQL server with `character_set_server=utf8mb4', and
leave `characterEncoding' out of the Connector/J connection string.
Connector/J will then autodetect the UTF-8 setting.

To override the automatically detected encoding on the client side, use
the characterEncoding property in the URL used to connect to the server.

To allow multiple character sets to be sent from the client, use the
UTF-8 encoding, either by configuring `utf8' as the default server
character set, or by configuring the JDBC driver to use UTF-8 through
the `characterEncoding' property.

When specifying character encodings on the client side, use Java-style
names. The following table lists MySQL character set names and the
corresponding Java-style names:

*MySQL to Java Encoding Name Translations*

MySQL Character Set Name             Java-Style Character Encoding Name
`ascii'                              `US-ASCII'
`big5'                               `Big5'
`gbk'                                `GBK'
`sjis'                               `SJIS (or Cp932 or MS932 for MySQL
                                     Server < 4.1.11)'
`cp932'                              `Cp932 or MS932 (MySQL Server >
                                     4.1.11)'
`gb2312'                             `EUC_CN'
`ujis'                               `EUC_JP'
`euckr'                              `EUC_KR'
`latin1'                             `Cp1252'
`latin2'                             `ISO8859_2'
`greek'                              `ISO8859_7'
`hebrew'                             `ISO8859_8'
`cp866'                              `Cp866'
`tis620'                             `TIS620'
`cp1250'                             `Cp1250'
`cp1251'                             `Cp1251'
`cp1257'                             `Cp1257'
`macroman'                           `MacRoman'
`macce'                              `MacCentralEurope'
`utf8'                               `UTF-8'
`ucs2'                               `UnicodeBig'

*Warning*:

Do not issue the query `set names' with Connector/J, as the driver will
not detect that the character set has changed, and will continue to use
the character set detected during the initial connection setup.


File: manual.info,  Node: connector-j-reference-using-ssl,  Next: connector-j-using-pam,  Prev: connector-j-reference-charsets,  Up: connector-j-reference

22.3.5.6 Connecting Securely Using SSL
......................................

SSL in MySQL Connector/J encrypts all data (other than the initial
handshake) between the JDBC driver and the server. The performance
penalty for enabling SSL is an increase in query processing time
between 35% and 50%, depending on the size of the query, and the amount
of data it returns.

For SSL support to work, you must have the following:

   * A JDK that includes JSSE (Java Secure Sockets Extension), like
     JDK-1.4.1 or newer. SSL does not currently work with a JDK that
     you can add JSSE to, like JDK-1.2.x or JDK-1.3.x due to the
     following JSSE bug:
     `http://developer.java.sun.com/developer/bugParade/bugs/4273544.html'

   * A MySQL server that supports SSL and has been compiled and
     configured to do so, which is MySQL 4.0.4 or later. For more
     information, see *Note configuring-for-ssl::.

   * A client certificate (covered later in this section)

The system works through two Java truststore files, one file contains
the certificate information for the server (`truststore' in the
examples below). The other file contains the certificate for the client
(`keystore' in the examples below). All Java truststore files are
password protected by supplying a suitable password to the `keytool'
when you create the files. You need the file names and associated
passwords to create an SSL connection.

You will first need to import the MySQL server CA Certificate into a
Java truststore. A sample MySQL server CA Certificate is located in the
`SSL' subdirectory of the MySQL source distribution. This is what SSL
will use to determine if you are communicating with a secure MySQL
server.  Alternatively, use the CA Certificate that you have generated
or been provided with by your SSL provider.

To use Java's `keytool' to create a truststore in the current directory
, and import the server's CA certificate (`cacert.pem'), you can do the
following (assuming that `keytool' is in your path. The `keytool' is
typically located in the `bin' subdirectory of your JDK or JRE):

     shell> keytool -import -alias mysqlServerCACert \
              -file cacert.pem -keystore truststore

Enter the password when prompted for the keystore file.  Interaction
with `keytool' looks like this:

     Enter keystore password:  *********
     Owner: EMAILADDRESS=walrus@example.com, CN=Walrus,
            O=MySQL AB, L=Orenburg, ST=Some-State, C=RU
     Issuer: EMAILADDRESS=walrus@example.com, CN=Walrus,
            O=MySQL AB, L=Orenburg, ST=Some-State, C=RU
     Serial number: 0
     Valid from:
        Fri Aug 02 16:55:53 CDT 2002 until: Sat Aug 02 16:55:53 CDT 2003
     Certificate fingerprints:
         MD5:  61:91:A0:F2:03:07:61:7A:81:38:66:DA:19:C4:8D:AB
         SHA1: 25:77:41:05:D5:AD:99:8C:14:8C:CA:68:9C:2F:B8:89:C3:34:4D:6C
     Trust this certificate? [no]:  yes
     Certificate was added to keystore

You then have two options: either import the client certificate that
matches the CA certificate you just imported, or create a new client
certificate.

Importing an existing certificate requires the certificate to be in DER
format. You can use `openssl' to convert an existing certificate into
the new format. For example:

     shell> openssl x509 -outform DER -in client-cert.pem -out client.cert

Now import the converted certificate into your keystore using `keytool':

     shell> keytool -import -file client.cert -keystore keystore -alias mysqlClientCertificate

To generate your own client certificate, use `keytool' to create a
suitable certificate and add it to the `keystore' file:

     shell> keytool -genkey -keyalg rsa \
          -alias mysqlClientCertificate -keystore keystore

Keytool will prompt you for the following information, and create a
keystore named `keystore' in the current directory.

Respond with information that is appropriate for your situation:

     Enter keystore password:  *********
     What is your first and last name?
       [Unknown]:  Matthews
     What is the name of your organizational unit?
       [Unknown]:  Software Development
     What is the name of your organization?
       [Unknown]:  MySQL AB
     What is the name of your City or Locality?
       [Unknown]:  Flossmoor
     What is the name of your State or Province?
       [Unknown]:  IL
     What is the two-letter country code for this unit?
       [Unknown]:  US
     Is <CN=Matthews, OU=Software Development, O=MySQL AB,
      L=Flossmoor, ST=IL, C=US> correct?
       [no]:  y

     Enter key password for <mysqlClientCertificate>
             (RETURN if same as keystore password):

Finally, to get JSSE to use the keystore and truststore that you have
generated, you need to set the following system properties when you
start your JVM, replacing PATH_TO_KEYSTORE_FILE with the full path to
the keystore file you created, PATH_TO_TRUSTSTORE_FILE with the path to
the truststore file you created, and using the appropriate password
values for each property. You can do this either on the command line:

     -Djavax.net.ssl.keyStore=PATH_TO_KEYSTORE_FILE
     -Djavax.net.ssl.keyStorePassword=PASSWORD
     -Djavax.net.ssl.trustStore=PATH_TO_TRUSTSTORE_FILE
     -Djavax.net.ssl.trustStorePassword=PASSWORD

Or you can set the values directly within the application:

     System.setProperty("javax.net.ssl.keyStore","PATH_TO_KEYSTORE_FILE");
     System.setProperty("javax.net.ssl.keyStorePassword","PASSWORD");
     System.setProperty("javax.net.ssl.trustStore","PATH_TO_TRUSTSTORE_FILE");
     System.setProperty("javax.net.ssl.trustStorePassword","PASSWORD");

You will also need to set `useSSL' to `true' in your connection
parameters for MySQL Connector/J, either by adding `useSSL=true' to
your URL, or by setting the property `useSSL' to `true' in the
java.util.Properties instance you pass to
`DriverManager.getConnection()'.

You can test that SSL is working by turning on JSSE debugging (as
detailed below), and look for the following key events:

     ...
     *** ClientHello, v3.1
     RandomCookie:  GMT: 1018531834 bytes = { 199, 148, 180, 215, 74, 12, »
       54, 244, 0, 168, 55, 103, 215, 64, 16, 138, 225, 190, 132, 153, 2, »
       217, 219, 239, 202, 19, 121, 78 }
     Session ID:  {}
     Cipher Suites:  { 0, 5, 0, 4, 0, 9, 0, 10, 0, 18, 0, 19, 0, 3, 0, 17 }
     Compression Methods:  { 0 }
     ***
     [write] MD5 and SHA1 hashes:  len = 59
     0000: 01 00 00 37 03 01 3D B6 90 FA C7 94 B4 D7 4A 0C  ...7..=.......J.
     0010: 36 F4 00 A8 37 67 D7 40 10 8A E1 BE 84 99 02 D9  6...7g.@........
     0020: DB EF CA 13 79 4E 00 00 10 00 05 00 04 00 09 00  ....yN..........
     0030: 0A 00 12 00 13 00 03 00 11 01 00                 ...........
     main, WRITE:  SSL v3.1 Handshake, length = 59
     main, READ:  SSL v3.1 Handshake, length = 74
     *** ServerHello, v3.1
     RandomCookie:  GMT: 1018577560 bytes = { 116, 50, 4, 103, 25, 100, 58, »
        202, 79, 185, 178, 100, 215, 66, 254, 21, 83, 187, 190, 42, 170, 3, »
        132, 110, 82, 148, 160, 92 }
     Session ID:  {163, 227, 84, 53, 81, 127, 252, 254, 178, 179, 68, 63, »
        182, 158, 30, 11, 150, 79, 170, 76, 255, 92, 15, 226, 24, 17, 177, »
        219, 158, 177, 187, 143}
     Cipher Suite:  { 0, 5 }
     Compression Method: 0
     ***
     %% Created:  [Session-1, SSL_RSA_WITH_RC4_128_SHA]
     ** SSL_RSA_WITH_RC4_128_SHA
     [read] MD5 and SHA1 hashes:  len = 74
     0000: 02 00 00 46 03 01 3D B6 43 98 74 32 04 67 19 64  ...F..=.C.t2.g.d
     0010: 3A CA 4F B9 B2 64 D7 42 FE 15 53 BB BE 2A AA 03  :.O..d.B..S..*..
     0020: 84 6E 52 94 A0 5C 20 A3 E3 54 35 51 7F FC FE B2  .nR..\ ..T5Q....
     0030: B3 44 3F B6 9E 1E 0B 96 4F AA 4C FF 5C 0F E2 18  .D?.....O.L.\...
     0040: 11 B1 DB 9E B1 BB 8F 00 05 00                    ..........
     main, READ:  SSL v3.1 Handshake, length = 1712
     ...

JSSE provides debugging (to `stdout') when you set the following system
property: `-Djavax.net.debug=all' This will tell you what keystores and
truststores are being used, as well as what is going on during the SSL
handshake and certificate exchange. It will be helpful when trying to
determine what is not working when trying to get an SSL connection to
happen.


File: manual.info,  Node: connector-j-using-pam,  Next: connector-j-reference-replication-connection,  Prev: connector-j-reference-using-ssl,  Up: connector-j-reference

22.3.5.7 Connecting Using PAM Authentication
............................................

Java applications using Connector/J 5.1.21 and higher can can connect
to MySQL servers that use the pluggable authentication module (PAM)
authentication scheme.

For PAM authentication to work, you must have the following:

   * A MySQL server that supports PAM authentication: a commercial
     distribution of MySQL 5.5.16 or higher. See *Note
     pam-authentication-plugin:: for more information. Connector/J
     implements the same cleartext authentication method as in *Note
     cleartext-authentication-plugin::.

   * SSL capability, as explained in *Note
     connector-j-reference-using-ssl::. Because the PAM authentication
     scheme sends the original password to the server, the connection
     to the server must be encrypted.

PAM authentication support is enabled by default in Connector/J 5.1.21
and up, so no extra configuration is needed.

To disable the PAM authentication feature, specify
`mysql_clear_password' (the method) or
`com.mysql.jdbc.authentication.MysqlClearPasswordPlugin' (the class
name) in the comma-separated list of arguments for the
`disabledAuthenticationPlugins' connection option. See *Note
connector-j-reference-configuration-properties:: for details about that
connection option.


File: manual.info,  Node: connector-j-reference-replication-connection,  Next: connector-j-reference-error-sqlstates,  Prev: connector-j-using-pam,  Up: connector-j-reference

22.3.5.8 Using Master/Slave Replication with ReplicationConnection
..................................................................

Connector/J 3.1.7 and higher includes a variant of the driver that will
automatically send queries to a read/write master, or a failover or
round-robin loadbalanced set of slaves based on the state of
`Connection.getReadOnly()'.

An application signals that it wants a transaction to be read-only by
calling `Connection.setReadOnly(true)', this replication-aware
connection will use one of the slave connections, which are
load-balanced per-vm using a round-robin scheme (a given connection is
sticky to a slave unless that slave is removed from service). If you
have a write transaction, or if you have a read that is time-sensitive
(remember, replication in MySQL is asynchronous), set the connection to
be not read-only, by calling `Connection.setReadOnly(false)' and the
driver will ensure that further calls are sent to the master MySQL
server. The driver takes care of propagating the current state of
autocommit, isolation level, and catalog between all of the connections
that it uses to accomplish this load balancing functionality.

To enable this functionality, use the
`com.mysql.jdbc.ReplicationDriver' class when configuring your
application server's connection pool or when creating an instance of a
JDBC driver for your standalone application. Because it accepts the
same URL format as the standard MySQL JDBC driver, `ReplicationDriver'
does not currently work with `java.sql.DriverManager'-based connection
creation unless it is the only MySQL JDBC driver registered with the
`DriverManager' .

Here is a short example of how `ReplicationDriver' might be used in a
standalone application:

     import java.sql.Connection;
     import java.sql.ResultSet;
     import java.util.Properties;

     import com.mysql.jdbc.ReplicationDriver;

     public class ReplicationDriverDemo {

       public static void main(String[] args) throws Exception {
         ReplicationDriver driver = new ReplicationDriver();

         Properties props = new Properties();

         // We want this for failover on the slaves
         props.put("autoReconnect", "true");

         // We want to load balance between the slaves
         props.put("roundRobinLoadBalance", "true");

         props.put("user", "foo");
         props.put("password", "bar");

         //
         // Looks like a normal MySQL JDBC url, with a
         // comma-separated list of hosts, the first
         // being the 'master', the rest being any number
         // of slaves that the driver will load balance against
         //

         Connection conn =
             driver.connect("jdbc:mysql:replication://master,slave1,slave2,slave3/test",
                 props);

         //
         // Perform read/write work on the master
         // by setting the read-only flag to "false"
         //

         conn.setReadOnly(false);
         conn.setAutoCommit(false);
         conn.createStatement().executeUpdate("UPDATE some_table ....");
         conn.commit();

         //
         // Now, do a query from a slave, the driver automatically picks one
         // from the list
         //

         conn.setReadOnly(true);

         ResultSet rs =
           conn.createStatement().executeQuery("SELECT a,b FROM alt_table");

          .......
       }
     }

Consider investigating the Load Balancing JDBC Pool (`lbpool') tool,
which provides a wrapper around the standard JDBC driver and enables
you to use DB connection pools that includes checks for system failures
and uneven load distribution. For more information, see Load Balancing
JDBC Pool (lbpool) (http://code.tailrank.com/lbpool).


File: manual.info,  Node: connector-j-reference-error-sqlstates,  Prev: connector-j-reference-replication-connection,  Up: connector-j-reference

22.3.5.9 Mapping MySQL Error Numbers to JDBC SQLState Codes
...........................................................

The table below provides a mapping of the MySQL error numbers to JDBC
`SQLState' values.

*Mapping of MySQL Error Numbers to SQLStates*

MySQL Error    MySQL Error Name              Legacy         SQL Standard
Number                                       (X/Open)       SQLState
                                             SQLState       
1022           ER_DUP_KEY                    S1000          23000
1037           ER_OUTOFMEMORY                S1001          HY001
1038           ER_OUT_OF_SORTMEMORY          S1001          HY001
1040           ER_CON_COUNT_ERROR            08004          08004
1042           ER_BAD_HOST_ERROR             08004          08S01
1043           ER_HANDSHAKE_ERROR            08004          08S01
1044           ER_DBACCESS_DENIED_ERROR      S1000          42000
1045           ER_ACCESS_DENIED_ERROR        28000          28000
1047           ER_UNKNOWN_COM_ERROR          08S01          HY000
1050           ER_TABLE_EXISTS_ERROR         S1000          42S01
1051           ER_BAD_TABLE_ERROR            42S02          42S02
1052           ER_NON_UNIQ_ERROR             S1000          23000
1053           ER_SERVER_SHUTDOWN            S1000          08S01
1054           ER_BAD_FIELD_ERROR            S0022          42S22
1055           ER_WRONG_FIELD_WITH_GROUP     S1009          42000
1056           ER_WRONG_GROUP_FIELD          S1009          42000
1057           ER_WRONG_SUM_SELECT           S1009          42000
1058           ER_WRONG_VALUE_COUNT          21S01          21S01
1059           ER_TOO_LONG_IDENT             S1009          42000
1060           ER_DUP_FIELDNAME              S1009          42S21
1061           ER_DUP_KEYNAME                S1009          42000
1062           ER_DUP_ENTRY                  S1009          23000
1063           ER_WRONG_FIELD_SPEC           S1009          42000
1064           ER_PARSE_ERROR                42000          42000
1065           ER_EMPTY_QUERY                42000          42000
1066           ER_NONUNIQ_TABLE              S1009          42000
1067           ER_INVALID_DEFAULT            S1009          42000
1068           ER_MULTIPLE_PRI_KEY           S1009          42000
1069           ER_TOO_MANY_KEYS              S1009          42000
1070           ER_TOO_MANY_KEY_PARTS         S1009          42000
1071           ER_TOO_LONG_KEY               S1009          42000
1072           ER_KEY_COLUMN_DOES_NOT_EXITS  S1009          42000
1073           ER_BLOB_USED_AS_KEY           S1009          42000
1074           ER_TOO_BIG_FIELDLENGTH        S1009          42000
1075           ER_WRONG_AUTO_KEY             S1009          42000
1080           ER_FORCING_CLOSE              S1000          08S01
1081           ER_IPSOCK_ERROR               08S01          08S01
1082           ER_NO_SUCH_INDEX              S1009          42S12
1083           ER_WRONG_FIELD_TERMINATORS    S1009          42000
1084           ER_BLOBS_AND_NO_TERMINATED    S1009          42000
1090           ER_CANT_REMOVE_ALL_FIELDS     S1000          42000
1091           ER_CANT_DROP_FIELD_OR_KEY     S1000          42000
1101           ER_BLOB_CANT_HAVE_DEFAULT     S1000          42000
1102           ER_WRONG_DB_NAME              S1000          42000
1103           ER_WRONG_TABLE_NAME           S1000          42000
1104           ER_TOO_BIG_SELECT             S1000          42000
1106           ER_UNKNOWN_PROCEDURE          S1000          42000
1107           ER_WRONG_PARAMCOUNT_TO_PROCEDURES1000          42000
1109           ER_UNKNOWN_TABLE              S1000          42S02
1110           ER_FIELD_SPECIFIED_TWICE      S1000          42000
1112           ER_UNSUPPORTED_EXTENSION      S1000          42000
1113           ER_TABLE_MUST_HAVE_COLUMNS    S1000          42000
1115           ER_UNKNOWN_CHARACTER_SET      S1000          42000
1118           ER_TOO_BIG_ROWSIZE            S1000          42000
1120           ER_WRONG_OUTER_JOIN           S1000          42000
1121           ER_NULL_COLUMN_IN_INDEX       S1000          42000
1129           ER_HOST_IS_BLOCKED            08004          HY000
1130           ER_HOST_NOT_PRIVILEGED        08004          HY000
1131           ER_PASSWORD_ANONYMOUS_USER    S1000          42000
1132           ER_PASSWORD_NOT_ALLOWED       S1000          42000
1133           ER_PASSWORD_NO_MATCH          S1000          42000
1136           ER_WRONG_VALUE_COUNT_ON_ROW   S1000          21S01
1138           ER_INVALID_USE_OF_NULL        S1000          42000
1139           ER_REGEXP_ERROR               S1000          42000
1140           ER_MIX_OF_GROUP_FUNC_AND_FIELDSS1000          42000
1141           ER_NONEXISTING_GRANT          S1000          42000
1142           ER_TABLEACCESS_DENIED_ERROR   S1000          42000
1143           ER_COLUMNACCESS_DENIED_ERROR  S1000          42000
1144           ER_ILLEGAL_GRANT_FOR_TABLE    S1000          42000
1145           ER_GRANT_WRONG_HOST_OR_USER   S1000          42000
1146           ER_NO_SUCH_TABLE              S1000          42S02
1147           ER_NONEXISTING_TABLE_GRANT    S1000          42000
1148           ER_NOT_ALLOWED_COMMAND        S1000          42000
1149           ER_SYNTAX_ERROR               S1000          42000
1152           ER_ABORTING_CONNECTION        S1000          08S01
1153           ER_NET_PACKET_TOO_LARGE       S1000          08S01
1154           ER_NET_READ_ERROR_FROM_PIPE   S1000          08S01
1155           ER_NET_FCNTL_ERROR            S1000          08S01
1156           ER_NET_PACKETS_OUT_OF_ORDER   S1000          08S01
1157           ER_NET_UNCOMPRESS_ERROR       S1000          08S01
1158           ER_NET_READ_ERROR             S1000          08S01
1159           ER_NET_READ_INTERRUPTED       S1000          08S01
1160           ER_NET_ERROR_ON_WRITE         S1000          08S01
1161           ER_NET_WRITE_INTERRUPTED      S1000          08S01
1162           ER_TOO_LONG_STRING            S1000          42000
1163           ER_TABLE_CANT_HANDLE_BLOB     S1000          42000
1164           ER_TABLE_CANT_HANDLE_AUTO_INCREMENTS1000          42000
1166           ER_WRONG_COLUMN_NAME          S1000          42000
1167           ER_WRONG_KEY_COLUMN           S1000          42000
1169           ER_DUP_UNIQUE                 S1000          23000
1170           ER_BLOB_KEY_WITHOUT_LENGTH    S1000          42000
1171           ER_PRIMARY_CANT_HAVE_NULL     S1000          42000
1172           ER_TOO_MANY_ROWS              S1000          42000
1173           ER_REQUIRES_PRIMARY_KEY       S1000          42000
1177           ER_CHECK_NO_SUCH_TABLE        S1000          42000
1178           ER_CHECK_NOT_IMPLEMENTED      S1000          42000
1179           ER_CANT_DO_THIS_DURING_AN_TRANSACTIONS1000          25000
1184           ER_NEW_ABORTING_CONNECTION    S1000          08S01
1189           ER_MASTER_NET_READ            S1000          08S01
1190           ER_MASTER_NET_WRITE           S1000          08S01
1203           ER_TOO_MANY_USER_CONNECTIONS  S1000          42000
1205           ER_LOCK_WAIT_TIMEOUT          41000          41000
1207           ER_READ_ONLY_TRANSACTION      S1000          25000
1211           ER_NO_PERMISSION_TO_CREATE_USERS1000          42000
1213           ER_LOCK_DEADLOCK              41000          40001
1216           ER_NO_REFERENCED_ROW          S1000          23000
1217           ER_ROW_IS_REFERENCED          S1000          23000
1218           ER_CONNECT_TO_MASTER          S1000          08S01
1222           ER_WRONG_NUMBER_OF_COLUMNS_IN_SELECTS1000          21000
1226           ER_USER_LIMIT_REACHED         S1000          42000
1230           ER_NO_DEFAULT                 S1000          42000
1231           ER_WRONG_VALUE_FOR_VAR        S1000          42000
1232           ER_WRONG_TYPE_FOR_VAR         S1000          42000
1234           ER_CANT_USE_OPTION_HERE       S1000          42000
1235           ER_NOT_SUPPORTED_YET          S1000          42000
1239           ER_WRONG_FK_DEF               S1000          42000
1241           ER_OPERAND_COLUMNS            S1000          21000
1242           ER_SUBQUERY_NO_1_ROW          S1000          21000
1247           ER_ILLEGAL_REFERENCE          S1000          42S22
1248           ER_DERIVED_MUST_HAVE_ALIAS    S1000          42000
1249           ER_SELECT_REDUCED             S1000          01000
1250           ER_TABLENAME_NOT_ALLOWED_HERE S1000          42000
1251           ER_NOT_SUPPORTED_AUTH_MODE    S1000          08004
1252           ER_SPATIAL_CANT_HAVE_NULL     S1000          42000
1253           ER_COLLATION_CHARSET_MISMATCH S1000          42000
1261           ER_WARN_TOO_FEW_RECORDS       S1000          01000
1262           ER_WARN_TOO_MANY_RECORDS      S1000          01000
1263           ER_WARN_NULL_TO_NOTNULL       S1000          01000
1264           ER_WARN_DATA_OUT_OF_RANGE     S1000          01000
1265           ER_WARN_DATA_TRUNCATED        S1000          01000
1280           ER_WRONG_NAME_FOR_INDEX       S1000          42000
1281           ER_WRONG_NAME_FOR_CATALOG     S1000          42000
1286           ER_UNKNOWN_STORAGE_ENGINE     S1000          42000


File: manual.info,  Node: connector-j-usagenotes-basic,  Next: connector-j-usagenotes-j2ee-concepts-connection-pooling,  Prev: connector-j-reference,  Up: connector-j

22.3.6 JDBC Concepts
--------------------

* Menu:

* connector-j-usagenotes-connect-drivermanager::  Connecting to MySQL Using the JDBC `DriverManager' Interface
* connector-j-usagenotes-statements::  Using JDBC `Statement' Objects to Execute SQL
* connector-j-usagenotes-statements-callable::  Using JDBC `CallableStatements' to Execute Stored Procedures
* connector-j-usagenotes-last-insert-id::  Retrieving `AUTO_INCREMENT' Column Values through JDBC

This section provides some general JDBC background.


File: manual.info,  Node: connector-j-usagenotes-connect-drivermanager,  Next: connector-j-usagenotes-statements,  Prev: connector-j-usagenotes-basic,  Up: connector-j-usagenotes-basic

22.3.6.1 Connecting to MySQL Using the JDBC `DriverManager' Interface
.....................................................................

When you are using JDBC outside of an application server, the
`DriverManager' class manages the establishment of Connections.

Specify to the `DriverManager' which JDBC drivers to try to make
Connections with. The easiest way to do this is to use
`Class.forName()' on the class that implements the `java.sql.Driver'
interface. With MySQL Connector/J, the name of this class is
`com.mysql.jdbc.Driver'. With this method, you could use an external
configuration file to supply the driver class name and driver
parameters to use when connecting to a database.

The following section of Java code shows how you might register MySQL
Connector/J from the `main()' method of your application. If testing
this code, first read the installation section at *Note
connector-j-installing::, to make sure you have connector installed
correctly and the `CLASSPATH' set up. Also, ensure that MySQL is
configured to accept external TCP/IP connections.

     import java.sql.Connection;
     import java.sql.DriverManager;
     import java.sql.SQLException;

     // Notice, do not import com.mysql.jdbc.*
     // or you will have problems!

     public class LoadDriver {
         public static void main(String[] args) {
             try {
                 // The newInstance() call is a work around for some
                 // broken Java implementations

                 Class.forName("com.mysql.jdbc.Driver").newInstance();
             } catch (Exception ex) {
                 // handle the error
             }
         }
     }

After the driver has been registered with the `DriverManager', you can
obtain a `Connection' instance that is connected to a particular
database by calling `DriverManager.getConnection()':

If you have not already done so, please review the section *Note
connector-j-usagenotes-connect-drivermanager:: before working with
these examples.

This example shows how you can obtain a `Connection' instance from the
`DriverManager'. There are a few different signatures for the
`getConnection()' method. Consult the API documentation that comes with
your JDK for more specific information on how to use them.

     import java.sql.Connection;
     import java.sql.DriverManager;
     import java.sql.SQLException;

     Connection conn = null;
     ...
     try {
         conn =
            DriverManager.getConnection("jdbc:mysql://localhost/test?" +
                                        "user=monty&password=greatsqldb");

         // Do something with the Connection

        ...
     } catch (SQLException ex) {
         // handle any errors
         System.out.println("SQLException: " + ex.getMessage());
         System.out.println("SQLState: " + ex.getSQLState());
         System.out.println("VendorError: " + ex.getErrorCode());
     }

Once a Connection is established, it can be used to create Statement and
PreparedStatement objects, as well as retrieve metadata about the
database. This is explained in the following sections.


File: manual.info,  Node: connector-j-usagenotes-statements,  Next: connector-j-usagenotes-statements-callable,  Prev: connector-j-usagenotes-connect-drivermanager,  Up: connector-j-usagenotes-basic

22.3.6.2 Using JDBC `Statement' Objects to Execute SQL
......................................................

Statement objects allow you to execute basic SQL queries and retrieve
the results through the `ResultSet' class, which is described later.

To create a Statement instance, you call the `createStatement()' method
on the `Connection' object you have retrieved using one of the
`DriverManager.getConnection()' or `DataSource.getConnection()' methods
described earlier.

Once you have a Statement instance, you can execute a *Note `SELECT':
select. query by calling the `executeQuery(String)' method with the SQL
you want to use.

To update data in the database, use the `executeUpdate(String SQL)'
method. This method returns the number of rows matched by the update
statement, not the number of rows that were modified.

If you do not know ahead of time whether the SQL statement will be a
*Note `SELECT': select. or an *Note `UPDATE': update./*Note `INSERT':
insert, then you can use the `execute(String SQL)' method. This method
will return true if the SQL query was a *Note `SELECT': select, or
false if it was an *Note `UPDATE': update, *Note `INSERT': insert, or
*Note `DELETE': delete. statement. If the statement was a *Note
`SELECT': select. query, you can retrieve the results by calling the
`getResultSet()' method. If the statement was an *Note `UPDATE': update,
*Note `INSERT': insert, or *Note `DELETE': delete. statement, you can
retrieve the affected rows count by calling `getUpdateCount()' on the
Statement instance.

     import java.sql.Connection;
     import java.sql.DriverManager;
     import java.sql.SQLException;
     import java.sql.Statement;
     import java.sql.ResultSet;

     // assume that conn is an already created JDBC connection (see previous examples)

     Statement stmt = null;
     ResultSet rs = null;

     try {
         stmt = conn.createStatement();
         rs = stmt.executeQuery("SELECT foo FROM bar");

         // or alternatively, if you don't know ahead of time that
         // the query will be a SELECT...

         if (stmt.execute("SELECT foo FROM bar")) {
             rs = stmt.getResultSet();
         }

         // Now do something with the ResultSet ....
     }
     catch (SQLException ex){
         // handle any errors
         System.out.println("SQLException: " + ex.getMessage());
         System.out.println("SQLState: " + ex.getSQLState());
         System.out.println("VendorError: " + ex.getErrorCode());
     }
     finally {
         // it is a good idea to release
         // resources in a finally{} block
         // in reverse-order of their creation
         // if they are no-longer needed

         if (rs != null) {
             try {
                 rs.close();
             } catch (SQLException sqlEx) { } // ignore

             rs = null;
         }

         if (stmt != null) {
             try {
                 stmt.close();
             } catch (SQLException sqlEx) { } // ignore

             stmt = null;
         }
     }


File: manual.info,  Node: connector-j-usagenotes-statements-callable,  Next: connector-j-usagenotes-last-insert-id,  Prev: connector-j-usagenotes-statements,  Up: connector-j-usagenotes-basic

22.3.6.3 Using JDBC `CallableStatements' to Execute Stored Procedures
.....................................................................

Starting with MySQL server version 5.0 when used with Connector/J 3.1.1
or newer, the java.sql.CallableStatement interface is fully implemented
with the exception of the `getParameterMetaData()' method.

For more information on MySQL stored procedures, please refer to
`http://dev.mysql.com/doc/mysql/en/stored-routines.html'.

Connector/J exposes stored procedure functionality through JDBC's
CallableStatement interface.

*Note*:

Current versions of MySQL server do not return enough information for
the JDBC driver to provide result set metadata for callable statements.
This means that when using `CallableStatement', `ResultSetMetaData' may
return `NULL'.

The following example shows a stored procedure that returns the value
of inOutParam incremented by 1, and the string passed in using
inputParam as a ResultSet:

     CREATE PROCEDURE demoSp(IN inputParam VARCHAR(255), \
                             INOUT inOutParam INT)
     BEGIN
         DECLARE z INT;
         SET z = inOutParam + 1;
         SET inOutParam = z;

         SELECT inputParam;

         SELECT CONCAT('zyxw', inputParam);
     END

To use the `demoSp' procedure with Connector/J, follow these steps:

  1. Prepare the callable statement by using `Connection.prepareCall()'.

     Notice that you have to use JDBC escape syntax, and that the
     parentheses surrounding the parameter placeholders are not
     optional:

          import java.sql.CallableStatement;

          ...

              //
              // Prepare a call to the stored procedure 'demoSp'
              // with two parameters
              //
              // Notice the use of JDBC-escape syntax ({call ...})
              //

              CallableStatement cStmt = conn.prepareCall("{call demoSp(?, ?)}");

              cStmt.setString(1, "abcdefg");

     *Note*:

     `Connection.prepareCall()' is an expensive method, due to the
     metadata retrieval that the driver performs to support output
     parameters. For performance reasons, minimize unnecessary calls to
     `Connection.prepareCall()' by reusing CallableStatement instances
     in your code.

  2. Register the output parameters (if any exist)

     To retrieve the values of output parameters (parameters specified
     as `OUT' or `INOUT' when you created the stored procedure), JDBC
     requires that they be specified before statement execution using
     the various `registerOutputParameter()' methods in the
     CallableStatement interface:

          import java.sql.Types;
          ...
          //
          // Connector/J supports both named and indexed
          // output parameters. You can register output
          // parameters using either method, as well
          // as retrieve output parameters using either
          // method, regardless of what method was
          // used to register them.
          //
          // The following examples show how to use
          // the various methods of registering
          // output parameters (you should of course
          // use only one registration per parameter).
          //

          //
          // Registers the second parameter as output, and
          // uses the type 'INTEGER' for values returned from
          // getObject()
          //

          cStmt.registerOutParameter(2, Types.INTEGER);

          //
          // Registers the named parameter 'inOutParam', and
          // uses the type 'INTEGER' for values returned from
          // getObject()
          //

          cStmt.registerOutParameter("inOutParam", Types.INTEGER);
          ...

  3. Set the input parameters (if any exist)

     Input and in/out parameters are set as for PreparedStatement
     objects. However, CallableStatement also supports setting
     parameters by name:

          ...

              //
              // Set a parameter by index
              //

              cStmt.setString(1, "abcdefg");

              //
              // Alternatively, set a parameter using
              // the parameter name
              //

              cStmt.setString("inputParameter", "abcdefg");

              //
              // Set the 'in/out' parameter using an index
              //

              cStmt.setInt(2, 1);

              //
              // Alternatively, set the 'in/out' parameter
              // by name
              //

              cStmt.setInt("inOutParam", 1);

          ...

  4. Execute the CallableStatement, and retrieve any result sets or
     output parameters.

     Although CallableStatement supports calling any of the Statement
     execute methods (`executeUpdate()', `executeQuery()' or
     `execute()'), the most flexible method to call is `execute()', as
     you do not need to know ahead of time if the stored procedure
     returns result sets:

          ...

              boolean hadResults = cStmt.execute();

              //
              // Process all returned result sets
              //

              while (hadResults) {
                  ResultSet rs = cStmt.getResultSet();

                  // process result set
                  ...

                  hadResults = cStmt.getMoreResults();
              }

              //
              // Retrieve output parameters
              //
              // Connector/J supports both index-based and
              // name-based retrieval
              //

              int outputValue = cStmt.getInt(2); // index-based

              outputValue = cStmt.getInt("inOutParam"); // name-based

          ...


File: manual.info,  Node: connector-j-usagenotes-last-insert-id,  Prev: connector-j-usagenotes-statements-callable,  Up: connector-j-usagenotes-basic

22.3.6.4 Retrieving `AUTO_INCREMENT' Column Values through JDBC
...............................................................

Before version 3.0 of the JDBC API, there was no standard way of
retrieving key values from databases that supported auto increment or
identity columns. With older JDBC drivers for MySQL, you could always
use a MySQL-specific method on the Statement interface, or issue the
query `SELECT LAST_INSERT_ID()' after issuing an *Note `INSERT':
insert. to a table that had an `AUTO_INCREMENT' key. Using the
MySQL-specific method call isn't portable, and issuing a *Note
`SELECT': select. to get the `AUTO_INCREMENT' key's value requires
another round-trip to the database, which isn't as efficient as
possible. The following code snippets demonstrate the three different
ways to retrieve `AUTO_INCREMENT' values. First, we demonstrate the use
of the new JDBC 3.0 method `getGeneratedKeys()' which is now the
preferred method to use if you need to retrieve `AUTO_INCREMENT' keys
and have access to JDBC 3.0. The second example shows how you can
retrieve the same value using a standard `SELECT LAST_INSERT_ID()'
query. The final example shows how updatable result sets can retrieve
the `AUTO_INCREMENT' value when using the `insertRow()' method.

        Statement stmt = null;
        ResultSet rs = null;

        try {

         //
         // Create a Statement instance that we can use for
         // 'normal' result sets assuming you have a
         // Connection 'conn' to a MySQL database already
         // available

         stmt = conn.createStatement(java.sql.ResultSet.TYPE_FORWARD_ONLY,
                                     java.sql.ResultSet.CONCUR_UPDATABLE);

         //
         // Issue the DDL queries for the table for this example
         //

         stmt.executeUpdate("DROP TABLE IF EXISTS autoIncTutorial");
         stmt.executeUpdate(
                 "CREATE TABLE autoIncTutorial ("
                 + "priKey INT NOT NULL AUTO_INCREMENT, "
                 + "dataField VARCHAR(64), PRIMARY KEY (priKey))");

         //
         // Insert one row that will generate an AUTO INCREMENT
         // key in the 'priKey' field
         //

         stmt.executeUpdate(
                 "INSERT INTO autoIncTutorial (dataField) "
                 + "values ('Can I Get the Auto Increment Field?')",
                 Statement.RETURN_GENERATED_KEYS);

         //
         // Example of using Statement.getGeneratedKeys()
         // to retrieve the value of an auto-increment
         // value
         //

         int autoIncKeyFromApi = -1;

         rs = stmt.getGeneratedKeys();

         if (rs.next()) {
             autoIncKeyFromApi = rs.getInt(1);
         } else {

             // throw an exception from here
         }

         rs.close();

         rs = null;

         System.out.println("Key returned from getGeneratedKeys():"
             + autoIncKeyFromApi);
     } finally {

         if (rs != null) {
             try {
                 rs.close();
             } catch (SQLException ex) {
                 // ignore
             }
         }

         if (stmt != null) {
             try {
                 stmt.close();
             } catch (SQLException ex) {
                 // ignore
             }
         }
     }

        Statement stmt = null;
        ResultSet rs = null;

        try {

         //
         // Create a Statement instance that we can use for
         // 'normal' result sets.

         stmt = conn.createStatement();

         //
         // Issue the DDL queries for the table for this example
         //

         stmt.executeUpdate("DROP TABLE IF EXISTS autoIncTutorial");
         stmt.executeUpdate(
                 "CREATE TABLE autoIncTutorial ("
                 + "priKey INT NOT NULL AUTO_INCREMENT, "
                 + "dataField VARCHAR(64), PRIMARY KEY (priKey))");

         //
         // Insert one row that will generate an AUTO INCREMENT
         // key in the 'priKey' field
         //

         stmt.executeUpdate(
                 "INSERT INTO autoIncTutorial (dataField) "
                 + "values ('Can I Get the Auto Increment Field?')");

         //
         // Use the MySQL LAST_INSERT_ID()
         // function to do the same thing as getGeneratedKeys()
         //

         int autoIncKeyFromFunc = -1;
         rs = stmt.executeQuery("SELECT LAST_INSERT_ID()");

         if (rs.next()) {
             autoIncKeyFromFunc = rs.getInt(1);
         } else {
             // throw an exception from here
         }

         rs.close();

         System.out.println("Key returned from " +
                            "'SELECT LAST_INSERT_ID()': " +
                            autoIncKeyFromFunc);

     } finally {

         if (rs != null) {
             try {
                 rs.close();
             } catch (SQLException ex) {
                 // ignore
             }
         }

         if (stmt != null) {
             try {
                 stmt.close();
             } catch (SQLException ex) {
                 // ignore
             }
         }
     }

        Statement stmt = null;
        ResultSet rs = null;

        try {

         //
         // Create a Statement instance that we can use for
         // 'normal' result sets as well as an 'updatable'
         // one, assuming you have a Connection 'conn' to
         // a MySQL database already available
         //

         stmt = conn.createStatement(java.sql.ResultSet.TYPE_FORWARD_ONLY,
                                     java.sql.ResultSet.CONCUR_UPDATABLE);

         //
         // Issue the DDL queries for the table for this example
         //

         stmt.executeUpdate("DROP TABLE IF EXISTS autoIncTutorial");
         stmt.executeUpdate(
                 "CREATE TABLE autoIncTutorial ("
                 + "priKey INT NOT NULL AUTO_INCREMENT, "
                 + "dataField VARCHAR(64), PRIMARY KEY (priKey))");

         //
         // Example of retrieving an AUTO INCREMENT key
         // from an updatable result set
         //

         rs = stmt.executeQuery("SELECT priKey, dataField "
            + "FROM autoIncTutorial");

         rs.moveToInsertRow();

         rs.updateString("dataField", "AUTO INCREMENT here?");
         rs.insertRow();

         //
         // the driver adds rows at the end
         //

         rs.last();

         //
         // We should now be on the row we just inserted
         //

         int autoIncKeyFromRS = rs.getInt("priKey");

         rs.close();

         rs = null;

         System.out.println("Key returned for inserted row: "
             + autoIncKeyFromRS);

     } finally {

         if (rs != null) {
             try {
                 rs.close();
             } catch (SQLException ex) {
                 // ignore
             }
         }

         if (stmt != null) {
             try {
                 stmt.close();
             } catch (SQLException ex) {
                 // ignore
             }
         }
     }

Running the preceding example code should produce the following output:

     Key returned from getGeneratedKeys(): 1
     Key returned from SELECT LAST_INSERT_ID(): 1
     Key returned for inserted row: 2

At times, it can be tricky to use the `SELECT LAST_INSERT_ID()' query,
as that function's value is scoped to a connection. So, if some other
query happens on the same connection, the value is overwritten. On the
other hand, the `getGeneratedKeys()' method is scoped by the Statement
instance, so it can be used even if other queries happen on the same
connection, but not on the same Statement instance.


File: manual.info,  Node: connector-j-usagenotes-j2ee-concepts-connection-pooling,  Next: connector-j-usagenotes-j2ee-concepts-managing-load-balanced-connections,  Prev: connector-j-usagenotes-basic,  Up: connector-j

22.3.7 Connection Pooling with Connector/J
------------------------------------------

Connection pooling is a technique of creating and managing a pool of
connections that are ready for use by any thread that needs them.
Connection pooling can greatly increase the performance of your Java
application, while reducing overall resource usage.

* How Connection Pooling Works *

Most applications only need a thread to have access to a JDBC
connection when they are actively processing a transaction, which often
takes only milliseconds to complete. When not processing a transaction,
the connection sits idle. Connection pooling enables the idle
connection to be used by some other thread to do useful work.

In practice, when a thread needs to do work against a MySQL or other
database with JDBC, it requests a connection from the pool.  When the
thread is finished using the connection, it returns it to the pool, so
that it can be used by any other threads.

When the connection is loaned out from the pool, it is used exclusively
by the thread that requested it. From a programming point of view, it
is the same as if your thread called `DriverManager.getConnection()'
every time it needed a JDBC connection. With connection pooling, your
thread may end up using either a new connection or an already-existing
connection.

* Benefits of Connection Pooling *

The main benefits to connection pooling are:

   * Reduced connection creation time.

     Although this is not usually an issue with the quick connection
     setup that MySQL offers compared to other databases, creating new
     JDBC connections still incurs networking and JDBC driver overhead
     that will be avoided if connections are recycled.

   * Simplified programming model.

     When using connection pooling, each individual thread can act as
     though it has created its own JDBC connection, allowing you to use
     straightforward JDBC programming techniques.

   * Controlled resource usage.

     If you create a new connection every time a thread needs one,
     rather than using connection pooling, your application's resource
     usage can be wasteful and lead to unpredictable behavior under
     load.

* Using Connection Pooling with Connector/J *

Sun has standardized the concept of connection pooling in JDBC through
the JDBC 2.0 Optional interfaces, and all major application servers
have implementations of these APIs that work with MySQL Connector/J.

Generally, you configure a connection pool in your application server
configuration files, and access it through the Java Naming and
Directory Interface (JNDI). The following code shows how you might use
a connection pool from an application deployed in a J2EE application
server:

     import java.sql.Connection;
     import java.sql.SQLException;
     import java.sql.Statement;

     import javax.naming.InitialContext;
     import javax.sql.DataSource;

     public class MyServletJspOrEjb {

         public void doSomething() throws Exception {
             /*
              * Create a JNDI Initial context to be able to
              *  lookup  the DataSource
              *
              * In production-level code, this should be cached as
              * an instance or static variable, as it can
              * be quite expensive to create a JNDI context.
              *
              * Note: This code only works when you are using servlets
              * or EJBs in a J2EE application server. If you are
              * using connection pooling in standalone Java code, you
              * will have to create/configure datasources using whatever
              * mechanisms your particular connection pooling library
              * provides.
              */

             InitialContext ctx = new InitialContext();

              /*
               * Lookup the DataSource, which will be backed by a pool
               * that the application server provides. DataSource instances
               * are also a good candidate for caching as an instance
               * variable, as JNDI lookups can be expensive as well.
               */

             DataSource ds =
               (DataSource)ctx.lookup("java:comp/env/jdbc/MySQLDB");

             /*
              * The following code is what would actually be in your
              * Servlet, JSP or EJB 'service' method...where you need
              * to work with a JDBC connection.
              */

             Connection conn = null;
             Statement stmt = null;

             try {
                 conn = ds.getConnection();

                 /*
                  * Now, use normal JDBC programming to work with
                  * MySQL, making sure to close each resource when you're
                  * finished with it, which permits the connection pool
                  * resources to be recovered as quickly as possible
                  */

                 stmt = conn.createStatement();
                 stmt.execute("SOME SQL QUERY");

                 stmt.close();
                 stmt = null;

                 conn.close();
                 conn = null;
             } finally {
                 /*
                  * close any jdbc instances here that weren't
                  * explicitly closed during normal code path, so
                  * that we don't 'leak' resources...
                  */

                 if (stmt != null) {
                     try {
                         stmt.close();
                     } catch (sqlexception sqlex) {
                         // ignore, as we can't do anything about it here
                     }

                     stmt = null;
                 }

                 if (conn != null) {
                     try {
                         conn.close();
                     } catch (sqlexception sqlex) {
                         // ignore, as we can't do anything about it here
                     }

                     conn = null;
                 }
             }
         }
     }

As shown in the example above, after obtaining the JNDI
`InitialContext', and looking up the `DataSource', the rest of the code
follows familiar JDBC conventions.

When using connection pooling, always make sure that connections, and
anything created by them (such as statements or result sets) are
closed. This rule applies no matter what happens in your code
(exceptions, flow-of-control, and so forth). When these objects are
closed, they can be re-used; otherwise, they will be stranded, which
means that the MySQL server resources they represent (such as buffers,
locks, or sockets) are tied up for some time, or in the worst case can
be tied up forever.

* Sizing the Connection Pool *

Each connection to MySQL has overhead (memory, CPU, context switches,
and so forth) on both the client and server side. Every connection
limits how many resources there are available to your application as
well as the MySQL server. Many of these resources will be used whether
or not the connection is actually doing any useful work! Connection
pools can be tuned to maximize performance, while keeping resource
utilization below the point where your application will start to fail
rather than just run slower.

The optimal size for the connection pool depends on anticipated load
and average database transaction time. In practice, the optimal
connection pool size can be smaller than you might expect.  If you take
Sun's Java Petstore blueprint application for example, a connection
pool of 15-20 connections can serve a relatively moderate load (600
concurrent users) using MySQL and Tomcat with acceptable response times.

To correctly size a connection pool for your application, create load
test scripts with tools such as Apache JMeter or The Grinder, and load
test your application.

An easy way to determine a starting point is to configure your
connection pool's maximum number of connections to be unbounded, run a
load test, and measure the largest amount of concurrently used
connections. You can then work backward from there to determine what
values of minimum and maximum pooled connections give the best
performance for your particular application.

* Validating Connections *

MySQL Connector/J can validate the connection by executing a
lightweight ping against a server. In the case of load-balanced
connections, this is performed against all active pooled internal
connections that are retained. This is beneficial to Java applications
using connection pools, as the pool can use this feature to validate
connections. Depending on your connection pool and configuration, this
validation can be carried out at different times:

  1. Before the pool returns a connection to the application.

  2. When the application returns a connection to the pool.

  3. During periodic checks of idle connections.

To use this feature, specify a validation query in your connection pool
that starts with `/* ping */'. Note that the syntax must be exactly as
specified. This will cause the driver send a ping to the server and
return a dummy lightweight result set. When using a
`ReplicationConnection' or `LoadBalancedConnection', the ping will be
sent across all active connections.

It is critical that the syntax be specified correctly. The syntax needs
to be exact for reasons of efficiency, as this test is done for every
statement that is executed:


     protected static final String PING_MARKER = "/* ping */";
     ...
     if (sql.charAt(0) == '/') {
     if (sql.startsWith(PING_MARKER)) {
     doPingInstead();
     ...

None of the following snippets will work, because the ping syntax is
sensitive to whitespace, capitalization, and placement:

     sql = "/* PING */ SELECT 1";
     sql = "SELECT 1 /* ping*/";
     sql = "/*ping*/ SELECT 1";
     sql = " /* ping */ SELECT 1";
     sql = "/*to ping or not to ping*/ SELECT 1";

All of the previous statements will issue a normal `SELECT' statement
and will *not* be transformed into the lightweight ping. Further, for
load-balanced connections, the statement will be executed against one
connection in the internal pool, rather than validating each underlying
physical connection.  This results in the non-active physical
connections assuming a stale state, and they may die. If Connector/J
then re-balances, it might select a dead connection, resulting in an
exception being passed to the application. To help prevent this, you
can use `loadBalanceValidateConnectionOnSwapServer' to validate the
connection before use.

If your Connector/J deployment uses a connection pool that allows you
to specify a validation query, take advantage of it, but ensure that
the query starts _exactly_ with `/* ping */'. This is particularly
important if you are using the load-balancing or replication-aware
features of Connector/J, as it will help keep alive connections which
otherwise will go stale and die, causing problems later.


File: manual.info,  Node: connector-j-usagenotes-j2ee-concepts-managing-load-balanced-connections,  Next: connector-j-usagenotes-j2ee-concepts-load-balancing-failover,  Prev: connector-j-usagenotes-j2ee-concepts-connection-pooling,  Up: connector-j

22.3.8 Load Balancing with Connector/J
--------------------------------------

Connector/J has long provided an effective means to distribute
read/write load across multiple MySQL server instances for Cluster or
master-master replication deployments. Starting with Connector/J 5.1.3,
you can now dynamically configure load-balanced connections, with no
service outage. In-process transactions are not lost, and no
application exceptions are generated if any application is trying to
use that particular server instance.

There are two connection string options associated with this
functionality:

   * `loadBalanceConnectionGroup' - This provides the ability to group
     connections from different sources. This allows you to manage
     these JDBC sources within a single class loader in any combination
     you choose. If they use the same configuration, and you want to
     manage them as a logical single group, give them the same name.
     This is the key property for management: if you do not define a
     name (string) for `loadBalanceConnectionGroup', you cannot manage
     the connections. All load-balanced connections sharing the same
     `loadBalanceConnectionGroup' value, regardless of how the
     application creates them, will be managed together.

   * `loadBalanceEnableJMX' - The ability to manage the connections is
     exposed when you define a `loadBalanceConnectionGroup', but if you
     want to manage this externally, enable JMX by setting this property
     to `true'. This enables a JMX implementation, which exposes the
     management and monitoring operations of a connection group.
     Further, start your application with the
     `-Dcom.sun.management.jmxremote' JVM flag.  You can then perform
     connect and perform operations using a JMX client such as
     `jconsole'.

Once a connection has been made using the correct connection string
options, a number of monitoring properties are available:

   * Current active host count.

   * Current active physical connection count.

   * Current active logical connection count.

   * Total logical connections created.

   * Total transaction count.

The following management operations can also be performed:

   * Add host.

   * Remove host.

The JMX interface,
`com.mysql.jdbc.jmx.LoadBalanceConnectionGroupManagerMBean', has the
following methods:

   * `int getActiveHostCount(String group);'

   * `int getTotalHostCount(String group);'

   * `long getTotalLogicalConnectionCount(String group);'

   * `long getActiveLogicalConnectionCount(String group);'

   * `long getActivePhysicalConnectionCount(String group);'

   * `long getTotalPhysicalConnectionCount(String group);'

   * `long getTotalTransactionCount(String group);'

   * `void removeHost(String group, String host) throws SQLException;'

   * `void stopNewConnectionsToHost(String group, String host) throws
     SQLException;'

   * `void addHost(String group, String host, boolean forExisting);'

   * `String getActiveHostsList(String group);'

   * `String getRegisteredConnectionGroups();'

The `getRegisteredConnectionGroups()' method returns the names of all
connection groups defined in that class loader.

You can test this setup with the following code:


     public class Test {

         private static String URL = "jdbc:mysql:loadbalance://" +
             "localhost:3306,localhost:3310/test?" +
             "loadBalanceConnectionGroup=first&loadBalanceEnableJMX=true";

         public static void main(String[] args) throws Exception {
             new Thread(new Repeater()).start();
             new Thread(new Repeater()).start();
             new Thread(new Repeater()).start();
         }

         static Connection getNewConnection() throws SQLException, ClassNotFoundException {
             Class.forName("com.mysql.jdbc.Driver");
             return DriverManager.getConnection(URL, "root", "");
         }

         static void executeSimpleTransaction(Connection c, int conn, int trans){
             try {
                 c.setAutoCommit(false);
                 Statement s = c.createStatement();
                 s.executeQuery("SELECT SLEEP(1) /* Connection: " + conn + ", transaction: " + trans + " */");
                 c.commit();
             } catch (SQLException e) {
                 e.printStackTrace();
             }
         }

         public static class Repeater implements Runnable {
             public void run() {
                 for(int i=0; i < 100; i++){
                     try {
                         Connection c = getNewConnection();
                         for(int j=0; j < 10; j++){
                             executeSimpleTransaction(c, i, j);
                             Thread.sleep(Math.round(100 * Math.random()));
                         }
                         c.close();
                         Thread.sleep(100);
                     } catch (Exception e) {
                         e.printStackTrace();
                     }
                 }
             }
         }
     }

After compiling, the application can be started with the
`-Dcom.sun.management.jmxremote' flag, to enable remote management.
`jconsole' can then be started. The `Test' main class will be listed by
`jconsole'. Select this and click `Connect'. You can then navigate to
the `com.mysql.jdbc.jmx.LoadBalanceConnectionGroupManager' bean. At
this point, you can click on various operations and examine the
returned result.

If you now had an additional instance of MySQL running on port 3309,
you could ensure that Connector/J starts using it by using the
`addHost()', which is exposed in `jconsole'. Note that these operations
can be performed dynamically without having to stop the application
running.

For further information on the combination of load balancing and
failover, see *Note
connector-j-usagenotes-j2ee-concepts-load-balancing-failover::.


File: manual.info,  Node: connector-j-usagenotes-j2ee-concepts-load-balancing-failover,  Next: connector-j-interceptors,  Prev: connector-j-usagenotes-j2ee-concepts-managing-load-balanced-connections,  Up: connector-j

22.3.9 Failover with Connector/J
--------------------------------

Connector/J provides a useful load-balancing implementation for Cluster
or multi-master deployments, as explained in *Note
connector-j-usagenotes-j2ee-concepts-managing-load-balanced-connections::.
As of Connector/J 5.1.12, this same implementation is used for
balancing load between read-only slaves with `ReplicationDriver'. When
trying to balance workload between multiple servers, the driver has to
determine when it is safe to swap servers, doing so in the middle of a
transaction, for example, could cause problems. It is important not to
lose state information. For this reason, Connector/J will only try to
pick a new server when one of the following happens:

  1. At transaction boundaries (transactions are explicitly committed
     or rolled back).

  2. A communication exception (SQL State starting with "08") is
     encountered.

  3. When a `SQLException' matches conditions defined by user, using
     the extension points defined by the `loadBalanceSQLStateFailover',
     `loadBalanceSQLExceptionSubclassFailover' or
     `loadBalanceExceptionChecker' properties.

The third condition revolves around three new properties introduced
with Connector/J 5.1.13. It allows you to control which `SQLException's
trigger failover.

   * `loadBalanceExceptionChecker' - The `loadBalanceExceptionChecker'
     property is really the key. This takes a fully-qualified class
     name which implements the new
     `com.mysql.jdbc.LoadBalanceExceptionChecker' interface. This
     interface is very simple, and you only need to implement the
     following method:

          public boolean shouldExceptionTriggerFailover(SQLException ex)

     A `SQLException' is passed in, and a boolean returned. A value of
     `true' triggers a failover, `false' does not.

     You can use this to implement your own custom logic. An example
     where this might be useful is when dealing with transient errors
     when using MySQL Cluster, where certain buffers may become
     overloaded. The following code snippet illustrates this:


          public class NdbLoadBalanceExceptionChecker
           extends StandardLoadBalanceExceptionChecker {

           public boolean shouldExceptionTriggerFailover(SQLException ex) {
            return super.shouldExceptionTriggerFailover(ex)
              ||  checkNdbException(ex);
           }

           private boolean checkNdbException(SQLException ex){
           // Have to parse the message since most NDB errors
           // are mapped to the same DEMC.
            return (ex.getMessage().startsWith("Lock wait timeout exceeded") ||
            (ex.getMessage().startsWith("Got temporary error")
            && ex.getMessage().endsWith("from NDB")));
           }
          }

     The code above extends
     `com.mysql.jdbc.StandardLoadBalanceExceptionChecker', which is the
     default implementation. There are a few convenient shortcuts built
     into this, for those who want to have some level of control using
     properties, without writing Java code. This default implementation
     uses the two remaining properties: `loadBalanceSQLStateFailover'
     and `loadBalanceSQLExceptionSubclassFailover'.

   * `loadBalanceSQLStateFailover' - allows you to define a
     comma-delimited list of `SQLState' code prefixes, against which a
     `SQLException' is compared. If the prefix matches, failover is
     triggered. So, for example, the following would trigger a failover
     if a given `SQLException' starts with "00", or is "12345":

          loadBalanceSQLStateFailover=00,12345

   * `loadBalanceSQLExceptionSubclassFailover' - can be used in
     conjunction with `loadBalanceSQLStateFailover' or on its own.  If
     you want certain subclasses of `SQLException' to trigger failover,
     simply provide a comma-delimited list of fully-qualified class or
     interface names to check against. For example, if you want all
     `SQLTransientConnectionExceptions' to trigger failover, you would
     specify:

          loadBalanceSQLExceptionSubclassFailover=java.sql.SQLTransientConnectionException

While the three fail-over conditions enumerated earlier suit most
situations, if `autocommit' is enabled, Connector/J never re-balances,
and continues using the same physical connection. This can be
problematic, particularly when load-balancing is being used to
distribute read-only load across multiple slaves. However, Connector/J
can be configured to re-balance after a certain number of statements
are executed, when `autocommit' is enabled. This functionality is
dependent upon the following properties:

   * `loadBalanceAutoCommitStatementThreshold' - defines the number of
     matching statements which will trigger the driver to potentially
     swap physical server connections.  The default value, 0, retains
     the behavior that connections with `autocommit' enabled are never
     balanced.

   * `loadBalanceAutoCommitStatementRegex' - the regular expression
     against which statements must match. The default value, blank,
     matches all statements. So, for example, using the following
     properties will cause Connector/J to re-balance after every third
     statement that contains the string `test':

          loadBalanceAutoCommitStatementThreshold=3
          loadBalanceAutoCommitStatementRegex=.*test.*

     `loadBalanceAutoCommitStatementRegex' can prove useful in a number
     of situations. Your application may use temporary tables,
     server-side session state variables, or connection state, where
     letting the driver arbitrarily swap physical connections before
     processing is complete could cause data loss or other problems.
     This allows you to identify a trigger statement that is only
     executed when it is safe to swap physical connections.


File: manual.info,  Node: connector-j-interceptors,  Next: connector-j-usagenotes-tomcat,  Prev: connector-j-usagenotes-j2ee-concepts-load-balancing-failover,  Up: connector-j

22.3.10 Using the Connector/J Interceptor Classes
-------------------------------------------------

An interceptor is a software design pattern that provides a transparent
way to extend or modify some aspect of a program, similar to a user
exit. No recompiling is required. With Connector/J, the interceptors
are enabled and disabled by updating the connection string to refer to
different sets of interceptor classes that you instantiate.

The connection properties that control the interceptors are explained in
*Note connector-j-reference-configuration-properties:::

   * `connectionLifecycleInterceptors', where you specify the fully
     qualified names of classes that implement the
     `com.mysql.jdbc.ConnectionLifecycleInterceptor' interface. In
     these kinds of interceptor classes, you might log events such as
     rollbacks, measure the time between transaction start and end, or
     count events such as calls to `setAutoCommit()'.

   * `exceptionInterceptors', where you specify the fully qualified
     names of classes that implement the
     `com.mysql.jdbc.ExceptionInterceptor' interface. In these kinds of
     interceptor classes, you might add extra diagnostic information to
     exceptions that can have multiple causes or indicate a problem
     with server settings.  Because `exceptionInterceptors' classes are
     only called when handling a `SQLException' thrown from Connector/J
     code, they can be used even in production deployments without
     substantial performance overhead.

   * `statementInterceptors', where you specify the fully qualified
     names of classes that implement the
     `com.mysql.jdbc.StatementInterceptorV2' interface. In these kinds
     of interceptor classes, you might change or augment the processing
     done by certain kinds of statements, such as automatically
     checking for queried data in a `memcached' server, rewriting slow
     queries, logging information about statement execution, or route
     requests to remote servers.


File: manual.info,  Node: connector-j-usagenotes-tomcat,  Next: connector-j-usagenotes-jboss,  Prev: connector-j-interceptors,  Up: connector-j

22.3.11 Using Connector/J with Tomcat
-------------------------------------

The following instructions are based on the instructions for
Tomcat-5.x, available at
`http://tomcat.apache.org/tomcat-5.5-doc/jndi-datasource-examples-howto.html'
which is current at the time this document was written.

First, install the `.jar' file that comes with Connector/J in
`$CATALINA_HOME/common/lib' so that it is available to all applications
installed in the container.

Next, configure the JNDI DataSource by adding a declaration resource to
`$CATALINA_HOME/conf/server.xml' in the context that defines your web
application:

       <Context ....>

       ...

       <Resource name="jdbc/MySQLDB"
                    auth="Container"
                    type="javax.sql.DataSource"/>

       <ResourceParams name="jdbc/MySQLDB">
         <parameter>
           <name>factory</name>
           <value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
         </parameter>

         <parameter>
           <name>maxActive</name>
           <value>10</value>
         </parameter>

         <parameter>
           <name>maxIdle</name>
           <value>5</value>
         </parameter>

         <parameter>
           <name>validationQuery</name>
           <value>SELECT 1</value>
         </parameter>

         <parameter>
           <name>testOnBorrow</name>
           <value>true</value>
         </parameter>

         <parameter>
           <name>testWhileIdle</name>
           <value>true</value>
         </parameter>

         <parameter>
           <name>timeBetweenEvictionRunsMillis</name>
           <value>10000</value>
         </parameter>

         <parameter>
           <name>minEvictableIdleTimeMillis</name>
           <value>60000</value>
         </parameter>

         <parameter>
          <name>username</name>
          <value>someuser</value>
         </parameter>

         <parameter>
          <name>password</name>
          <value>somepass</value>
         </parameter>

         <parameter>
            <name>driverClassName</name>
            <value>com.mysql.jdbc.Driver</value>
         </parameter>

         <parameter>
           <name>url</name>
           <value>jdbc:mysql://localhost:3306/test</value>
         </parameter>

       </ResourceParams>
     </Context>

Note that Connector/J 5.1.3 introduced a facility whereby, rather than
use a `validationQuery' value of `SELECT 1', it is possible to use
`validationQuery' with a value set to `/* ping */'. This sends a ping
to the server which then returns a fake result set. This is a lighter
weight solution. It also has the advantage that if using
`ReplicationConnection' or `LoadBalancedConnection' type connections,
the ping will be sent across all active connections. The following XML
snippet illustrates how to select this option:


     <parameter>
      <name>validationQuery</name>
      <value>/* ping */</value>
     </parameter>

Note that `/* ping */' has to be specified exactly.

In general, follow the installation instructions that come with your
version of Tomcat, as the way you configure datasources in Tomcat
changes from time to time, and if you use the wrong syntax in your XML
file, you will most likely end up with an exception similar to the
following:

     Error: java.sql.SQLException: Cannot load JDBC driver class 'null ' SQL
     state: null

Note that the auto-loading of drivers having the
`META-INF/service/java.sql.Driver' class in JDBC 4.0 causes an improper
undeployment of the Connector/J driver in Tomcat on Windows. Namely,
the Connector/J jar remains locked.  This is an initialization problem
that is not related to the driver. The possible workarounds, if viable,
are as follows: use "`antiResourceLocking=true'" as a Tomcat Context
attribute, or remove the `META-INF/' directory.


File: manual.info,  Node: connector-j-usagenotes-jboss,  Next: connector-j-usagenotes-spring-config,  Prev: connector-j-usagenotes-tomcat,  Up: connector-j

22.3.12 Using Connector/J with JBoss
------------------------------------

These instructions cover JBoss-4.x. To make the JDBC driver classes
available to the application server, copy the `.jar' file that comes
with Connector/J to the `lib' directory for your server configuration
(which is usually called `default'). Then, in the same configuration
directory, in the subdirectory named deploy, create a datasource
configuration file that ends with `-ds.xml', which tells JBoss to
deploy this file as a JDBC Datasource. The file should have the
following contents:

     <datasources>
         <local-tx-datasource>

             <jndi-name>MySQLDB</jndi-name>
             <connection-url>jdbc:mysql://localhost:3306/dbname</connection-url>
             <driver-class>com.mysql.jdbc.Driver</driver-class>
             <user-name>user</user-name>
             <password>pass</password>

             <min-pool-size>5</min-pool-size>

             <max-pool-size>20</max-pool-size>

             <idle-timeout-minutes>5</idle-timeout-minutes>

             <exception-sorter-class-name>
       com.mysql.jdbc.integration.jboss.ExtendedMysqlExceptionSorter
             </exception-sorter-class-name>
             <valid-connection-checker-class-name>
       com.mysql.jdbc.integration.jboss.MysqlValidConnectionChecker
             </valid-connection-checker-class-name>

         </local-tx-datasource>
     </datasources>


File: manual.info,  Node: connector-j-usagenotes-spring-config,  Next: connector-j-usagenotes-glassfish-config,  Prev: connector-j-usagenotes-jboss,  Up: connector-j

22.3.13 Using Connector/J with Spring
-------------------------------------

* Menu:

* connector-j-usagenotes-spring-config-jdbctemplate::  Using JdbcTemplate
* connector-j-usagenotes-spring-config-transactional::  Transactional JDBC Access
* connector-j-usagenotes-spring-config-connpooling::  Connection Pooling with Spring

The Spring Framework is a Java-based application framework designed for
assisting in application design by providing a way to configure
components. The technique used by Spring is a well known design pattern
called Dependency Injection (see Inversion of Control Containers and
the Dependency Injection pattern
(http://www.martinfowler.com/articles/injection.html)). This article
will focus on Java-oriented access to MySQL databases with Spring 2.0.
For those wondering, there is a .NET port of Spring appropriately named
Spring.NET.

Spring is not only a system for configuring components, but also
includes support for aspect oriented programming (AOP). This is one of
the main benefits and the foundation for Spring's resource and
transaction management. Spring also provides utilities for integrating
resource management with JDBC and Hibernate.

For the examples in this section the MySQL world sample database will
be used. The first task is to set up a MySQL data source through
Spring. Components within Spring use the `bean' terminology. For
example, to configure a connection to a MySQL server supporting the
world sample database, you might use:


     <util:map id="dbProps">
         <entry key="db.driver" value="com.mysql.jdbc.Driver"/>
         <entry key="db.jdbcurl" value="jdbc:mysql://localhost/world"/>
         <entry key="db.username" value="myuser"/>
         <entry key="db.password" value="mypass"/>
     </util:map>

In the above example, we are assigning values to properties that will
be used in the configuration. For the datasource configuration:


     <bean id="dataSource"
            class="org.springframework.jdbc.datasource.DriverManagerDataSource">
         <property name="driverClassName" value="${db.driver}"/>
         <property name="url" value="${db.jdbcurl}"/>
         <property name="username" value="${db.username}"/>
         <property name="password" value="${db.password}"/>
     </bean>

The placeholders are used to provide values for properties of this
bean. This means that you can specify all the properties of the
configuration in one place instead of entering the values for each
property on each bean. We do, however, need one more bean to pull this
all together. The last bean is responsible for actually replacing the
placeholders with the property values.


     <bean
      class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer">
         <property name="properties" ref="dbProps"/>
     </bean>

Now that we have our MySQL data source configured and ready to go, we
write some Java code to access it. The example below will retrieve
three random cities and their corresponding country using the data
source we configured with Spring.

     // Create a new application context. this processes the Spring config
     ApplicationContext ctx =
         new ClassPathXmlApplicationContext("ex1appContext.xml");
     // Retrieve the data source from the application context
         DataSource ds = (DataSource) ctx.getBean("dataSource");
     // Open a database connection using Spring's DataSourceUtils
     Connection c = DataSourceUtils.getConnection(ds);
     try {
         // retrieve a list of three random cities
         PreparedStatement ps = c.prepareStatement(
             "select City.Name as 'City', Country.Name as 'Country' " +
             "from City inner join Country on City.CountryCode = Country.Code " +
             "order by rand() limit 3");
         ResultSet rs = ps.executeQuery();
         while(rs.next()) {
             String city = rs.getString("City");
             String country = rs.getString("Country");
             System.out.printf("The city %s is in %s%n", city, country);
         }
     } catch (SQLException ex) {
         // something has failed and we print a stack trace to analyse the error
         ex.printStackTrace();
         // ignore failure closing connection
         try { c.close(); } catch (SQLException e) { }
     } finally {
         // properly release our connection
         DataSourceUtils.releaseConnection(c, ds);
     }

This is very similar to normal JDBC access to MySQL with the main
difference being that we are using DataSourceUtils instead of the
DriverManager to create the connection.

While it may seem like a small difference, the implications are
somewhat far reaching. Spring manages this resource in a way similar to
a container managed data source in a J2EE application server. When a
connection is opened, it can be subsequently accessed in other parts of
the code if it is synchronized with a transaction. This makes it
possible to treat different parts of your application as transactional
instead of passing around a database connection.


File: manual.info,  Node: connector-j-usagenotes-spring-config-jdbctemplate,  Next: connector-j-usagenotes-spring-config-transactional,  Prev: connector-j-usagenotes-spring-config,  Up: connector-j-usagenotes-spring-config

22.3.13.1 Using JdbcTemplate
............................

Spring makes extensive use of the Template method design pattern (see
Template Method Pattern
(http://en.wikipedia.org/wiki/Template_method_pattern)). Our immediate
focus will be on the `JdbcTemplate' and related classes, specifically
`NamedParameterJdbcTemplate'. The template classes handle obtaining and
releasing a connection for data access when one is needed.

The next example shows how to use `NamedParameterJdbcTemplate' inside
of a DAO (Data Access Object) class to retrieve a random city given a
country code.

     public class Ex2JdbcDao {
          /**
          * Data source reference which will be provided by Spring.
          */
          private DataSource dataSource;

          /**
          * Our query to find a random city given a country code. Notice
          * the ":country" parameter toward the end. This is called a
          * named parameter.
          */
          private String queryString = "select Name from City " +
             "where CountryCode = :country order by rand() limit 1";

          /**
          * Retrieve a random city using Spring JDBC access classes.
          */
          public String getRandomCityByCountryCode(String cntryCode) {
              // A template that permits using queries with named parameters
              NamedParameterJdbcTemplate template =
              new NamedParameterJdbcTemplate(dataSource);
              // A java.util.Map is used to provide values for the parameters
              Map params = new HashMap();
              params.put("country", cntryCode);
              // We query for an Object and specify what class we are expecting
              return (String)template.queryForObject(queryString, params, String.class);
          }

         /**
         * A JavaBean setter-style method to allow Spring to inject the data source.
         * @param dataSource
         */
         public void setDataSource(DataSource dataSource) {
             this.dataSource = dataSource;
         }
     }

The focus in the above code is on the `getRandomCityByCountryCode()'
method. We pass a country code and use the `NamedParameterJdbcTemplate'
to query for a city. The country code is placed in a Map with the key
"country", which is the parameter is named in the SQL query.

To access this code, you need to configure it with Spring by providing
a reference to the data source.


     <bean id="dao" class="code.Ex2JdbcDao">
         <property name="dataSource" ref="dataSource"/>
     </bean>

At this point, we can just grab a reference to the DAO from Spring and
call `getRandomCityByCountryCode()'.

         // Create the application context
         ApplicationContext ctx =
         new ClassPathXmlApplicationContext("ex2appContext.xml");
         // Obtain a reference to our DAO
         Ex2JdbcDao dao = (Ex2JdbcDao) ctx.getBean("dao");

         String countryCode = "USA";

         // Find a few random cities in the US
         for(int i = 0; i < 4; ++i)
             System.out.printf("A random city in %s is %s%n", countryCode,
                 dao.getRandomCityByCountryCode(countryCode));

This example shows how to use Spring's JDBC classes to completely
abstract away the use of traditional JDBC classes including
`Connection' and `PreparedStatement'.


File: manual.info,  Node: connector-j-usagenotes-spring-config-transactional,  Next: connector-j-usagenotes-spring-config-connpooling,  Prev: connector-j-usagenotes-spring-config-jdbctemplate,  Up: connector-j-usagenotes-spring-config

22.3.13.2 Transactional JDBC Access
...................................

You might be wondering how we can add transactions into our code if we
do not deal directly with the JDBC classes. Spring provides a
transaction management package that not only replaces JDBC transaction
management, but also enables declarative transaction management
(configuration instead of code).

To use transactional database access, we will need to change the
storage engine of the tables in the world database. The downloaded
script explicitly creates MyISAM tables which do not support
transactional semantics. The InnoDB storage engine does support
transactions and this is what we will be using. We can change the
storage engine with the following statements.

     ALTER TABLE City ENGINE=InnoDB;
     ALTER TABLE Country ENGINE=InnoDB;
     ALTER TABLE CountryLanguage ENGINE=InnoDB;

A good programming practice emphasized by Spring is separating
interfaces and implementations. What this means is that we can create a
Java interface and only use the operations on this interface without
any internal knowledge of what the actual implementation is. We will
let Spring manage the implementation and with this it will manage the
transactions for our implementation.

First you create a simple interface:

     public interface Ex3Dao {
         Integer createCity(String name, String countryCode,
         String district, Integer population);
     }

This interface contains one method that will create a new city record
in the database and return the id of the new record. Next you need to
create an implementation of this interface.

     public class Ex3DaoImpl implements Ex3Dao {
         protected DataSource dataSource;
         protected SqlUpdate updateQuery;
         protected SqlFunction idQuery;

         public Integer createCity(String name, String countryCode,
             String district, Integer population) {
                 updateQuery.update(new Object[] { name, countryCode,
                        district, population });
                 return getLastId();
             }

         protected Integer getLastId() {
             return idQuery.run();
         }
     }

You can see that we only operate on abstract query objects here and do
not deal directly with the JDBC API. Also, this is the complete
implementation. All of our transaction management will be dealt with in
the configuration. To get the configuration started, we need to create
the DAO.


     <bean id="dao" class="code.Ex3DaoImpl">
         <property name="dataSource" ref="dataSource"/>
         <property name="updateQuery">...</property>
         <property name="idQuery">...</property>
     </bean>

Now you need to set up the transaction configuration. The first thing
you must do is create transaction manager to manage the data source and
a specification of what transaction properties are required for the
`dao' methods.


     <bean id="transactionManager"
       class="org.springframework.jdbc.datasource.DataSourceTransactionManager">
         <property name="dataSource" ref="dataSource"/>
     </bean>

     <tx:advice id="txAdvice" transaction-manager="transactionManager">
         <tx:attributes>
             <tx:method name="*"/>
         </tx:attributes>
     </tx:advice>

The preceding code creates a transaction manager that handles
transactions for the data source provided to it. The `txAdvice' uses
this transaction manager and the attributes specify to create a
transaction for all methods.  Finally you need to apply this advice
with an AOP pointcut.


     <aop:config>
         <aop:pointcut id="daoMethods"
             expression="execution(* code.Ex3Dao.*(..))"/>
          <aop:advisor advice-ref="txAdvice" pointcut-ref="daoMethods"/>
     </aop:config>

This basically says that all methods called on the `Ex3Dao' interface
will be wrapped in a transaction. To make use of this, you only have to
retrieve the `dao' from the application context and call a method on
the `dao' instance.

     Ex3Dao dao = (Ex3Dao) ctx.getBean("dao");
     Integer id = dao.createCity(name,  countryCode, district, pop);

We can verify from this that there is no transaction management
happening in our Java code and it is all configured with Spring.  This
is a very powerful notion and regarded as one of the most beneficial
features of Spring.


File: manual.info,  Node: connector-j-usagenotes-spring-config-connpooling,  Prev: connector-j-usagenotes-spring-config-transactional,  Up: connector-j-usagenotes-spring-config

22.3.13.3 Connection Pooling with Spring
........................................

In many situations, such as web applications, there will be a large
number of small database transactions. When this is the case, it
usually makes sense to create a pool of database connections available
for web requests as needed. Although MySQL does not spawn an extra
process when a connection is made, there is still a small amount of
overhead to create and set up the connection. Pooling of connections
also alleviates problems such as collecting large amounts of sockets in
the `TIME_WAIT' state.

Setting up pooling of MySQL connections with Spring is as simple as
changing the data source configuration in the application context.
There are a number of configurations that we can use.  The first
example is based on the Jakarta Commons DBCP library
(http://jakarta.apache.org/commons/dbcp/). The example below replaces
the source configuration that was based on `DriverManagerDataSource'
with DBCP's BasicDataSource.


     <bean id="dataSource" destroy-method="close"
       class="org.apache.commons.dbcp.BasicDataSource">
         <property name="driverClassName" value="${db.driver}"/>
         <property name="url" value="${db.jdbcurl}"/>
         <property name="username" value="${db.username}"/>
         <property name="password" value="${db.password}"/>
         <property name="initialSize" value="3"/>
     </bean>

The configuration of the two solutions is very similar. The difference
is that DBCP will pool connections to the database instead of creating
a new connection every time one is requested. We have also set a
parameter here called `initialSize'. This tells DBCP that we want three
connections in the pool when it is created.

Another way to configure connection pooling is to configure a data
source in our J2EE application server. Using JBoss as an example, you
can set up the MySQL connection pool by creating a file called
`mysql-local-ds.xml' and placing it in the server/default/deploy
directory in JBoss. Once we have this setup, we can use JNDI to look it
up. With Spring, this lookup is very simple. The data source
configuration looks like this.


     <jee:jndi-lookup id="dataSource" jndi-name="java:MySQL_DS"/>


File: manual.info,  Node: connector-j-usagenotes-glassfish-config,  Next: connector-j-usagenotes-troubleshooting,  Prev: connector-j-usagenotes-spring-config,  Up: connector-j

22.3.14 Using Connector/J with GlassFish
----------------------------------------

* Menu:

* connector-j-usagenotes-glassfish-config-jsp::  A Simple JSP Application with Glassfish, Connector/J and MySQL
* connector-j-usagenotes-glassfish-config-servlet::  A Simple Servlet with Glassfish, Connector/J and MySQL

This section explains how to use MySQL Connector/J with Glassfish (tm)
Server Open Source Edition 3.0.1. Glassfish can be downloaded from the
Glassfish website
(https://glassfish.dev.java.net/public/downloadsindex.html#top).

Once Glassfish is installed you will need to make sure it can access
MySQL Connector/J. To do this copy the MySQL Connector/J JAR file to
the directory `GLASSFISH_INSTALL/glassfish/lib'.  For example, copy
`mysql-connector-java-5.1.12-bin.jar' to
`C:\glassfishv3\glassfish\lib'. Restart the Glassfish Application
Server.

You are now ready to create JDBC Connection Pools and JDBC Resources.

*Creating a Connection Pool*

  1. In the Glassfish Administration Console, using the navigation tree
     navigate to `Resources', `JDBC', `Connection Pools'.

  2. In the `JDBC Connection Pools' frame click `New'. You will enter a
     two step wizard.

  3. In the `Name' field under `General Settings' enter the name for
     the connection pool, for example enter MySQLConnPool.

  4. In the `Resource Type' field, select `javax.sql.DataSource' from
     the drop-down listbox.

  5. In the `Database Vendor' field, select `MySQL' from the drop-down
     listbox. Click `Next' to go to the next page of the wizard.

  6. You can accept the default settings for General Settings, Pool
     Settings and Transactions for this example. Scroll down to
     Additional Properties.

  7. In Additional Properties you will need to ensure the following
     properties are set:

        * *ServerName* - The server to connect to. For local testing
          this will be `localhost'.

        * *User* - The user name with which to connect to MySQL.

        * *Password* - The corresponding password for the user.

        * *DatabaseName* - The database to connect to, for example the
          sample MySQL database `World'.

  8. Click `Finish' to exit the wizard. You will be taken to the `JDBC
     Connection Pools' page where all current connection pools,
     including the one you just created, will be displayed.

  9. In the `JDBC Connection Pools' frame click on the connection pool
     you just created. Here, you can review and edit information about
     the connection pool. Because Connector/J does not support
     optimized validation queries, go to the `Advanced' tab, and under
     Connection Validation, configure the following settings:

        * *Connection Validation* - select `Required'.

        * *Validation Method* - select `table' from the drop-down menu.

        * *Table Name* - enter `DUAL'.

 10. To test your connection pool click the `Ping' button at the top of
     the frame. A message will be displayed confirming correct
     operation or otherwise. If an error message is received recheck the
     previous steps, and ensure that MySQL Connector/J has been
     correctly copied into the previously specified location.

Now that you have created a connection pool you will also need to
create a JDBC Resource (data source) for use by your application.

*Creating a JDBC Resource*

Your Java application will usually reference a data source object to
establish a connection with the database. This needs to be created
first using the following procedure.

   * Using the navigation tree in the Glassfish Administration Console,
     navigate to `Resources', `JDBC', `JDBC Resources'. A list of
     resources will be displayed in the `JDBC Resources' frame.

   * Click `New'. The `New JDBC Resource' frame will be displayed.

   * In the `JNDI Name' field, enter the JNDI name that will be used to
     access this resource, for example enter jdbc/MySQLDataSource.

   * In the `Pool Name' field, select a connection pool you want this
     resource to use from the drop-down listbox.

   * Optionally, you can enter a description into the `Description'
     field.

   * Additional properties can be added if required.

   * Click `OK' to create the new JDBC resource. The `JDBC Resources'
     frame will list all available JDBC Resources.


File: manual.info,  Node: connector-j-usagenotes-glassfish-config-jsp,  Next: connector-j-usagenotes-glassfish-config-servlet,  Prev: connector-j-usagenotes-glassfish-config,  Up: connector-j-usagenotes-glassfish-config

22.3.14.1 A Simple JSP Application with Glassfish, Connector/J and MySQL
........................................................................

This section shows how to deploy a simple JSP application on Glassfish,
that connects to a MySQL database.

This example assumes you have already set up a suitable Connection Pool
and JDBC Resource, as explained in the preceding sections. It is also
assumed you have a sample database installed, such as `world'.

The main application code, `index.jsp' is presented here:


     <%@ page import="java.sql.*, javax.sql.*, java.io.*, javax.naming.*" %>
     <html>
     <head><title>Hello world from JSP</title></head>
     <body>
     <%
       InitialContext ctx;
       DataSource ds;
       Connection conn;
       Statement stmt;
       ResultSet rs;

       try {
         ctx = new InitialContext();
         ds = (DataSource) ctx.lookup("java:comp/env/jdbc/MySQLDataSource");
         //ds = (DataSource) ctx.lookup("jdbc/MySQLDataSource");
         conn = ds.getConnection();
         stmt = conn.createStatement();
         rs = stmt.executeQuery("SELECT * FROM Country");

         while(rs.next()) {
     %>
         <h3>Name: <%= rs.getString("Name") %></h3>
         <h3>Population: <%= rs.getString("Population") %></h3>
     <%
         }
       }
       catch (SQLException se) {
     %>
         <%= se.getMessage() %>
     <%
       }
       catch (NamingException ne) {
     %>
         <%= ne.getMessage() %>
     <%
       }
     %>
     </body>
     </html>

In addition two XML files are required: `web.xml', and `sun-web.xml'.
There may be other files present, such as classes and images. These
files are organized into the directory structure as follows:

     index.jsp
     WEB-INF
        |
        - web.xml
        - sun-web.xml

The code for `web.xml' is:


     <?xml version="1.0" encoding="UTF-8"?>
     <web-app version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
       <display-name>HelloWebApp</display-name>
       <distributable/>
       <resource-ref>
         <res-ref-name>jdbc/MySQLDataSource</res-ref-name>
         <res-type>javax.sql.DataSource</res-type>
         <res-auth>Container</res-auth>
         <res-sharing-scope>Shareable</res-sharing-scope>
       </resource-ref>
     </web-app>

The code for `sun-web.xml' is:


     <?xml version="1.0" encoding="UTF-8"?>
     <!DOCTYPE sun-web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Application Server 8.1 Servlet 2.4//EN" "http://www.sun.com/software/appserver/dtds/sun-web-app_2_4-1.dtd">
     <sun-web-app>
       <context-root>HelloWebApp</context-root>
       <resource-ref>
         <res-ref-name>jdbc/MySQLDataSource</res-ref-name>
         <jndi-name>jdbc/MySQLDataSource</jndi-name>
       </resource-ref>
     </sun-web-app>

These XML files illustrate a very important aspect of running JDBC
applications on Glassfish. On Glassfish it is important to map the
string specified for a JDBC resource to its JNDI name, as set up in the
Glassfish administration console. In this example, the JNDI name for
the JDBC resource, as specified in the Glassfish Administration console
when creating the JDBC Resource, was `jdbc/MySQLDataSource'. This must
be mapped to the name given in the application. In this example the
name specified in the application, `jdbc/MySQLDataSource', and the JNDI
name, happen to be the same, but this does not necessarily have to be
the case. Note that the XML element <res-ref-name> is used to specify
the name as used in the application source code, and this is mapped to
the JNDI name specified using the <jndi-name> element, in the file
`sun-web.xml'. The resource also has to be created in the `web.xml'
file, although the mapping of the resource to a JNDI name takes place
in the `sun-web.xml' file.

If you do not have this mapping set up correctly in the XML files you
will not be able to lookup the data source using a JNDI lookup string
such as:

     ds = (DataSource) ctx.lookup("java:comp/env/jdbc/MySQLDataSource");

You will still be able to access the data source directly using:

     ds = (DataSource) ctx.lookup("jdbc/MySQLDataSource");

With the source files in place, in the correct directory structure, you
are ready to deploy the application:

  1. In the navigation tree, navigate to `Applications' - the
     `Applications' frame will be displayed.  Click `Deploy'.

  2. You can now deploy an application packaged into a single WAR file
     from a remote client, or you can choose a packaged file or
     directory that is locally accessible to the server. If you are
     simply testing an application locally you can simply point
     Glassfish at the directory that contains your application, without
     needing to package the application into a WAR file.

  3. Now select the application type from the `Type' drop-down listbox,
     which in this example is `Web application'.

  4. Click OK.

Now, when you navigate to the `Applications' frame, you will have the
option to `Launch', `Redeploy', or `Restart' your application. You can
test your application by clicking `Launch'. The application will
connection to the MySQL database and display the Name and Population of
countries in the `Country' table.


File: manual.info,  Node: connector-j-usagenotes-glassfish-config-servlet,  Prev: connector-j-usagenotes-glassfish-config-jsp,  Up: connector-j-usagenotes-glassfish-config

22.3.14.2 A Simple Servlet with Glassfish, Connector/J and MySQL
................................................................

This section describes a simple servlet that can be used in the
Glassfish environment to access a MySQL database. As with the previous
section, this example assumes the sample database `world' is installed.

The project is set up with the following directory structure:

     index.html
     WEB-INF
        |
        - web.xml
        - sun-web.xml
        - classes
             |
             - HelloWebServlet.java
             - HelloWebServlet.class

The code for the servlet, located in `HelloWebServlet.java', is as
follows:


     import javax.servlet.http.*;
     import javax.servlet.*;
     import java.io.*;
     import java.sql.*;
     import javax.sql.*;
     import javax.naming.*;

     public class HelloWebServlet extends HttpServlet {

       InitialContext ctx = null;
       DataSource ds = null;
       Connection conn = null;
       PreparedStatement ps = null;
       ResultSet rs = null;

       String sql = "SELECT Name, Population FROM Country WHERE Name=?";

       public void init () throws ServletException {
         try {
           ctx = new InitialContext();
           ds = (DataSource) ctx.lookup("java:comp/env/jdbc/MySQLDataSource");
           conn = ds.getConnection();
           ps = conn.prepareStatement(sql);
         }
         catch (SQLException se) {
           System.out.println("SQLException: "+se.getMessage());
         }
         catch (NamingException ne) {
           System.out.println("NamingException: "+ne.getMessage());
         }
       }

       public void destroy () {
         try {
           if (rs != null)
             rs.close();
           if (ps != null)
             ps.close();
           if (conn != null)
             conn.close();
           if (ctx != null)
             ctx.close();
         }
         catch (SQLException se) {
           System.out.println("SQLException: "+se.getMessage());
         }
         catch (NamingException ne) {
           System.out.println("NamingException: "+ne.getMessage());
         }
       }

       public void doPost(HttpServletRequest req, HttpServletResponse resp){
         try {
           String country_name = req.getParameter("country_name");
           resp.setContentType("text/html");
           PrintWriter writer = resp.getWriter();
           writer.println("<html><body>");
           writer.println("<p>Country: "+country_name+"</p>");
           ps.setString(1, country_name);
           rs = ps.executeQuery();
           if (!rs.next()){
             writer.println("<p>Country does not exist!</p>");
           }
           else {
             rs.beforeFirst();
             while(rs.next()) {
               writer.println("<p>Name: "+rs.getString("Name")+"</p>");
               writer.println("<p>Population: "+rs.getString("Population")+"</p>");
             }
           }
           writer.println("</body></html>");
           writer.close();
         }
         catch (Exception e) {
           e.printStackTrace();
         }
       }

       public void doGet(HttpServletRequest req, HttpServletResponse resp){
         try {
           resp.setContentType("text/html");
           PrintWriter writer = resp.getWriter();
           writer.println("<html><body>");
           writer.println("<p>Hello from servlet doGet()</p>");
           writer.println("</body></html>");
           writer.close();
         }
         catch (Exception e) {
           e.printStackTrace();
         }
       }
     }

In the preceding code a basic `doGet()' method is implemented, but is
not used in the example. The code to establish the connection with the
database is as shown in the previous example, *Note
connector-j-usagenotes-glassfish-config-jsp::, and is most conveniently
located in the servlet `init()' method. The corresponding freeing of
resources is located in the destroy method. The main functionality of
the servlet is located in the `doPost()' method. If the user enters nto
the input form a country name that can be located in the database, the
population of the country is returned. The code is invoked using a POST
action associated with the input form. The form is defined in the file
`index.html':


     <html>
       <head><title>HelloWebServlet</title></head>

       <body>
         <h1>HelloWebServlet</h1>

         <p>Please enter country name:</p>

         <form action="HelloWebServlet" method="POST">
           <input type="text" name="country_name" length="50" />
           <input type="submit" value="Submit" />
         </form>

       </body>
     </html>

The XML files `web.xml' and `sun-web.xml' are as for the example in the
preceding section, *Note connector-j-usagenotes-glassfish-config-jsp::,
no additional changes are required.

Whe compiling the Java source code, you will need to specify the path
to the file `javaee.jar'. On Windows, this can be done as follows:

     shell> javac -classpath c:\glassfishv3\glassfish\lib\javaee.jar HelloWebServlet.java

Once the code is correctly located within its directory structure, and
compiled, the application can be deployed in Glassfish. This is done in
exactly the same way as described in the preceding section, *Note
connector-j-usagenotes-glassfish-config-jsp::.

Once deployed the application can be launched from within the Glassfish
Administration Console. Enter a country name such as `England', and the
application will return `Country does not exist!'. Enter `France', and
the application will return a population of 59225700.


File: manual.info,  Node: connector-j-usagenotes-troubleshooting,  Next: connector-j-usagenotes-known-issues-limitations,  Prev: connector-j-usagenotes-glassfish-config,  Up: connector-j

22.3.15 Troubleshooting Connector/J Applications
------------------------------------------------

This section explains the symptoms and resolutions for the most
commonly encountered issues with applications using MySQL Connector/J.

*Questions*
   * 23.3.15.1: When I try to connect to the database with MySQL
     Connector/J, I get the following exception:

          SQLException: Server configuration denies access to data source
          SQLState: 08001
          VendorError: 0

     What is going on? I can connect just fine with the MySQL
     command-line client.

   * 23.3.15.2: My application throws an SQLException 'No Suitable
     Driver'.  Why is this happening?

   * 23.3.15.3: I'm trying to use MySQL Connector/J in an applet or
     application and I get an exception similar to:

          SQLException: Cannot connect to MySQL server on host:3306.
          Is there a MySQL server running on the machine/port you
          are trying to connect to?

          (java.security.AccessControlException)
          SQLState: 08S01
          VendorError: 0

   * 23.3.15.4: I have a servlet/application that works fine for a day,
     and then stops working overnight

   * 23.3.15.5: I'm trying to use JDBC 2.0 updatable result sets, and I
     get an exception saying my result set is not updatable.

   * 23.3.15.6: I cannot connect to the MySQL server using Connector/J,
     and I'm sure the connection parameters are correct.

   * 23.3.15.7: I am trying to connect to my MySQL server within my
     application, but I get the following error and stack trace:

          java.net.SocketException
          MESSAGE: Software caused connection abort: recv failed

          STACKTRACE:

          java.net.SocketException: Software caused connection abort: recv failed
          at java.net.SocketInputStream.socketRead0(Native Method)
          at java.net.SocketInputStream.read(Unknown Source)
          at com.mysql.jdbc.MysqlIO.readFully(MysqlIO.java:1392)
          at com.mysql.jdbc.MysqlIO.readPacket(MysqlIO.java:1414)
          at com.mysql.jdbc.MysqlIO.doHandshake(MysqlIO.java:625)
          at com.mysql.jdbc.Connection.createNewIO(Connection.java:1926)
          at com.mysql.jdbc.Connection.<init>(Connection.java:452)
          at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:411)

   * 23.3.15.8: My application is deployed through JBoss and I am using
     transactions to handle the statements on the MySQL database.
     Under heavy loads, I am getting an error and stack trace, but
     these only occur after a fixed period of heavy activity.

   * 23.3.15.9: When using `gcj', a `java.io.CharConversionException'
     exception is raised when working with certain character sequences.

   * 23.3.15.10: Updating a table that contains a primary key that is
     either *Note `FLOAT': floating-point-types. or compound primary
     key that uses *Note `FLOAT': floating-point-types.  fails to
     update the table and raises an exception.

   * 23.3.15.11: You get an `ER_NET_PACKET_TOO_LARGE' exception, even
     though the binary blob size you want to insert using JDBC is
     safely below the `max_allowed_packet' size.

   * 23.3.15.12: What should you do if you receive error messages
     similar to the following: `Communications link failure - Last
     packet sent to the server was X ms ago'?

   * 23.3.15.13: Why does Connector/J not reconnect to MySQL and
     re-issue the statement after a communication failure, instead of
     throwing an Exception, even though I use the `autoReconnect'
     connection string option?

   * 23.3.15.14: How can I use 3-byte UTF8 with Connector/J?

   * 23.3.15.15: How can I use 4-byte UTF8, `utf8mb4' with Connector/J?

   * 23.3.15.16: Using `useServerPrepStmts=false' and certain character
     encodings can lead to corruption when inserting BLOBs. How can
     this be avoided?

*Questions and Answers* *23.3.15.1: ** When I try to connect to the
database with MySQL Connector/J, I get the following exception: *
     SQLException: Server configuration denies access to data source
     SQLState: 08001
     VendorError: 0
* What is going on? I can connect just fine with the MySQL command-line
client.  *

MySQL Connector/J must use TCP/IP sockets to connect to MySQL, as Java
does not support Unix Domain Sockets.  Therefore, when MySQL
Connector/J connects to MySQL, the security manager in MySQL server
will use its grant tables to determine whether the connection is
permitted.

You must add the necessary security credentials to the MySQL server for
this to happen, using the *Note `GRANT': grant. statement to your MySQL
Server. See *Note grant::, for more information.

*Note*:

Testing your connectivity with the *Note `mysql': mysql. command-line
client will not work unless you add the "host" flag, and use something
other than `localhost' for the host. The *Note `mysql': mysql.
command-line client will use Unix domain sockets if you use the special
host name `localhost'. If you are testing connectivity to `localhost',
use `127.0.0.1' as the host name instead.

*Warning*:

Changing privileges and permissions improperly in MySQL can potentially
cause your server installation to not have optimal security properties.

*23.3.15.2: ** My application throws an SQLException 'No Suitable
Driver'.  Why is this happening?  *

There are three possible causes for this error:

   * The Connector/J driver is not in your `CLASSPATH', see *Note
     connector-j-installing::.

   * The format of your connection URL is incorrect, or you are
     referencing the wrong JDBC driver.

   * When using DriverManager, the `jdbc.drivers' system property has
     not been populated with the location of the Connector/J driver.

*23.3.15.3: ** I'm trying to use MySQL Connector/J in an applet or
application and I get an exception similar to: *
     SQLException: Cannot connect to MySQL server on host:3306.
     Is there a MySQL server running on the machine/port you
     are trying to connect to?

     (java.security.AccessControlException)
     SQLState: 08S01
     VendorError: 0

Either you're running an Applet, your MySQL server has been installed
with the "skip-networking" option set, or your MySQL server has a
firewall sitting in front of it.

Applets can only make network connections back to the machine that runs
the web server that served the .class files for the applet. This means
that MySQL must run on the same machine (or you must have some sort of
port re-direction) for this to work. This also means that you will not
be able to test applets from your local file system, you must always
deploy them to a web server.

MySQL Connector/J can only communicate with MySQL using TCP/IP, as Java
does not support Unix domain sockets. TCP/IP communication with MySQL
might be affected if MySQL was started with the "skip-networking" flag,
or if it is firewalled.

If MySQL has been started with the "skip-networking" option set (the
Debian Linux package of MySQL server does this for example), you need
to comment it out in the file `/etc/mysql/my.cnf' or `/etc/my.cnf'. Of
course your `my.cnf' file might also exist in the `data' directory of
your MySQL server, or anywhere else (depending on how MySQL was
compiled for your system). Binaries created by us always look in
`/etc/my.cnf' and `DATADIR/my.cnf'.  If your MySQL server has been
firewalled, you will need to have the firewall configured to allow
TCP/IP connections from the host where your Java code is running to the
MySQL server on the port that MySQL is listening to (by default, 3306).

*23.3.15.4: ** I have a servlet/application that works fine for a day,
and then stops working overnight *

MySQL closes connections after 8 hours of inactivity. You either need
to use a connection pool that handles stale connections or use the
`autoReconnect' parameter (see *Note
connector-j-reference-configuration-properties::).

Also, catch `SQLExceptions' in your application and deal with them,
rather than propagating them all the way until your application exits.
This is just good programming practice. MySQL Connector/J will set the
`SQLState' (see `java.sql.SQLException.getSQLState()' in your API docs)
to `08S01' when it encounters network-connectivity issues during the
processing of a query. Attempt to reconnect to MySQL at this point.

The following (simplistic) example shows what code that can handle
these exceptions might look like:

     public void doBusinessOp() throws SQLException {
         Connection conn = null;
         Statement stmt = null;
         ResultSet rs = null;

         //
         // How many times do you want to retry the transaction
         // (or at least _getting_ a connection)?
         //
         int retryCount = 5;

         boolean transactionCompleted = false;

         do {
             try {
                 conn = getConnection(); // assume getting this from a
                                         // javax.sql.DataSource, or the
                                         // java.sql.DriverManager

                 conn.setAutoCommit(false);

                 //
                 // Okay, at this point, the 'retry-ability' of the
                 // transaction really depends on your application logic,
                 // whether or not you're using autocommit (in this case
                 // not), and whether you're using transactional storage
                 // engines
                 //
                 // For this example, we'll assume that it's _not_ safe
                 // to retry the entire transaction, so we set retry
                 // count to 0 at this point
                 //
                 // If you were using exclusively transaction-safe tables,
                 // or your application could recover from a connection going
                 // bad in the middle of an operation, then you would not
                 // touch 'retryCount' here, and just let the loop repeat
                 // until retryCount == 0.
                 //
                 retryCount = 0;

                 stmt = conn.createStatement();

                 String query = "SELECT foo FROM bar ORDER BY baz";

                 rs = stmt.executeQuery(query);

                 while (rs.next()) {
                 }

                 rs.close();
                 rs = null;

                 stmt.close();
                 stmt = null;

                 conn.commit();
                 conn.close();
                 conn = null;

                 transactionCompleted = true;
             } catch (SQLException sqlEx) {

                 //
                 // The two SQL states that are 'retry-able' are 08S01
                 // for a communications error, and 40001 for deadlock.
                 //
                 // Only retry if the error was due to a stale connection,
                 // communications problem or deadlock
                 //

                 String sqlState = sqlEx.getSQLState();

                 if ("08S01".equals(sqlState) || "40001".equals(sqlState)) {
                     retryCount -= 1;
                 } else {
                     retryCount = 0;
                 }
             } finally {
                 if (rs != null) {
                     try {
                         rs.close();
                     } catch (SQLException sqlEx) {
                         // You'd probably want to log this...
                     }
                 }

                 if (stmt != null) {
                     try {
                         stmt.close();
                     } catch (SQLException sqlEx) {
                         // You'd probably want to log this as well...
                     }
                 }

                 if (conn != null) {
                     try {
                         //
                         // If we got here, and conn is not null, the
                         // transaction should be rolled back, as not
                         // all work has been done

                         try {
                             conn.rollback();
                         } finally {
                             conn.close();
                         }
                     } catch (SQLException sqlEx) {
                         //
                         // If we got an exception here, something
                         // pretty serious is going on, so we better
                         // pass it up the stack, rather than just
                         // logging it...

                         throw sqlEx;
                     }
                 }
             }
         } while (!transactionCompleted && (retryCount > 0));
     }

*Note*:

Use of the `autoReconnect' option is not recommended because there is
no safe method of reconnecting to the MySQL server without risking some
corruption of the connection state or database state information.
Instead, use a connection pool, which will enable your application to
connect to the MySQL server using an available connection from the
pool. The `autoReconnect' facility is deprecated, and may be removed in
a future release.

*23.3.15.5: ** I'm trying to use JDBC 2.0 updatable result sets, and I
get an exception saying my result set is not updatable.  *

Because MySQL does not have row identifiers, MySQL Connector/J can only
update result sets that have come from queries on tables that have at
least one primary key, the query must select every primary key column,
and the query can only span one table (that is, no joins). This is
outlined in the JDBC specification.

Note that this issue only occurs when using updatable result sets, and
is caused because Connector/J is unable to guarantee that it can
identify the correct rows within the result set to be updated without
having a unique reference to each row. There is no requirement to have
a unique field on a table if you are using *Note `UPDATE': update. or
*Note `DELETE': delete. statements on a table where you can
individually specify the criteria to be matched using a `WHERE' clause.

*23.3.15.6: ** I cannot connect to the MySQL server using Connector/J,
and I'm sure the connection parameters are correct.  *

Make sure that the `skip-networking' option has not been enabled on
your server. Connector/J must be able to communicate with your server
over TCP/IP; named sockets are not supported. Also ensure that you are
not filtering connections through a firewall or other network security
system. For more information, see *Note can-not-connect-to-server::.

*23.3.15.7: ** I am trying to connect to my MySQL server within my
application, but I get the following error and stack trace: *
     java.net.SocketException
     MESSAGE: Software caused connection abort: recv failed

     STACKTRACE:

     java.net.SocketException: Software caused connection abort: recv failed
     at java.net.SocketInputStream.socketRead0(Native Method)
     at java.net.SocketInputStream.read(Unknown Source)
     at com.mysql.jdbc.MysqlIO.readFully(MysqlIO.java:1392)
     at com.mysql.jdbc.MysqlIO.readPacket(MysqlIO.java:1414)
     at com.mysql.jdbc.MysqlIO.doHandshake(MysqlIO.java:625)
     at com.mysql.jdbc.Connection.createNewIO(Connection.java:1926)
     at com.mysql.jdbc.Connection.<init>(Connection.java:452)
     at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:411)

The error probably indicates that you are using a older version of the
Connector/J JDBC driver (2.0.14 or 3.0.x) and you are trying to connect
to a MySQL server with version 4.1x or newer. The older drivers are not
compatible with 4.1 or newer of MySQL as they do not support the newer
authentication mechanisms.

It is likely that the older version of the Connector/J driver exists
within your application directory or your `CLASSPATH' includes the
older Connector/J package.

*23.3.15.8: ** My application is deployed through JBoss and I am using
transactions to handle the statements on the MySQL database.  Under
heavy loads, I am getting an error and stack trace, but these only
occur after a fixed period of heavy activity.  *

This is a JBoss, not Connector/J, issue and is connected to the use of
transactions. Under heavy loads the time taken for transactions to
complete can increase, and the error is caused because you have
exceeded the predefined timeout.

You can increase the timeout value by setting the `TransactionTimeout'
attribute to the `TransactionManagerService' within the
`/conf/jboss-service.xml' file (pre-4.0.3) or `/deploy/jta-service.xml'
for JBoss 4.0.3 or later. See TransactionTimeout
(http://wiki.jboss.org/wiki/Wiki.jsp?page=TransactionTimeout) within
the JBoss wiki for more information.

*23.3.15.9: ** When using `gcj', a `java.io.CharConversionException'
exception is raised when working with certain character sequences.  *

This is a known issue with `gcj' which raises an exception when it
reaches an unknown character or one it cannot convert. Add
`useJvmCharsetConverters=true' to your connection string to force
character conversion outside of the `gcj' libraries, or try a different
JDK.

*23.3.15.10: ** Updating a table that contains a primary key that is
either *Note `FLOAT': floating-point-types. or compound primary key
that uses *Note `FLOAT': floating-point-types.  fails to update the
table and raises an exception.  *

Connector/J adds conditions to the `WHERE' clause during an *Note
`UPDATE': update. to check the old values of the primary key. If there
is no match, then Connector/J considers this a failure condition and
raises an exception.

The problem is that rounding differences between supplied values and
the values stored in the database may mean that the values never match,
and hence the update fails. The issue will affect all queries, not just
those from Connector/J.

To prevent this issue, use a primary key that does not use *Note
`FLOAT': floating-point-types. If you have to use a floating point
column in your primary key, use *Note `DOUBLE': floating-point-types. or
*Note `DECIMAL': fixed-point-types. types in place of *Note `FLOAT':
floating-point-types.

*23.3.15.11: ** You get an `ER_NET_PACKET_TOO_LARGE' exception, even
though the binary blob size you want to insert using JDBC is safely
below the `max_allowed_packet' size.  *

This is because the `hexEscapeBlock()' method in
`com.mysql.jdbc.PreparedStatement.streamToBytes()' may almost double
the size of your data.

*23.3.15.12: ** What should you do if you receive error messages
similar to the following: `Communications link failure - Last packet
sent to the server was X ms ago'?  *

Generally speaking, this error suggests that the network connection has
been closed. There can be several root causes:

   * Firewalls or routers may clamp down on idle connections (the MySQL
     client/server protocol does not ping).

   * The MySQL Server may be closing idle connections that exceed the
     `wait_timeout' or `interactive_timeout' threshold.

To help troubleshoot these issues, the following tips can be used. If a
recent (5.1.13+) version of Connector/J is used, you will see an
improved level of information compared to earlier versions. Older
versions simply display the last time a packet was sent to the server,
which is frequently 0 ms ago. This is of limited use, as it may be that
a packet was just sent, while a packet from the server has not been
received for several hours. Knowing the period of time since
Connector/J last received a packet from the server is useful
information, so if this is not displayed in your exception message, it
is recommended that you update Connector/J.

Further, if the time a packet was last sent/received exceeds the
`wait_timeout' or `interactive_timeout' threshold, this is noted in the
exception message.

Although network connections can be volatile, the following can be
helpful in avoiding problems:

   * Ensure connections are valid when used from the connection pool.
     Use a query that starts with `/* ping */' to execute a lightweight
     ping instead of full query. Note, the syntax of the ping needs to
     be exactly as specified here.

   * Minimize the duration a connection object is left idle while other
     application logic is executed.

   * Explicitly validate the connection before using it if the
     connection has been left idle for an extended period of time.

   * Ensure that `wait_timeout' and `interactive_timeout' are set
     sufficiently high.

   * Ensure that `tcpKeepalive' is enabled.

   * Ensure that any configurable firewall or router timeout settings
     allow for the maximum expected connection idle time.

*Note*:

Do not expect to be able to reuse a connection without problems, if it
has being lying idle for a period. If a connection is to be reused
after being idle for any length of time, ensure that you explicitly
test it before reusing it.

*23.3.15.13: ** Why does Connector/J not reconnect to MySQL and
re-issue the statement after a communication failure, instead of
throwing an Exception, even though I use the `autoReconnect' connection
string option?  *

There are several reasons for this. The first is transactional
integrity. The MySQL Reference Manual states that `there is no safe
method of reconnecting to the MySQL server without risking some
corruption of the connection state or database state information'.
Consider the following series of statements for example:


     conn.createStatement().execute(
       "UPDATE checking_account SET balance = balance - 1000.00 WHERE customer='Smith'");
     conn.createStatement().execute(
       "UPDATE savings_account SET balance = balance + 1000.00 WHERE customer='Smith'");
     conn.commit();

Consider the case where the connection to the server fails after the
`UPDATE' to `checking_account'. If no exception is thrown, and the
application never learns about the problem, it will continue executing.
However, the server did not commit the first transaction in this case,
so that will get rolled back. But execution continues with the next
transaction, and increases the `savings_account' balance by 1000. The
application did not receive an exception, so it continued regardless,
eventually committing the second transaction, as the commit only
applies to the changes made in the new connection. Rather than a
transfer taking place, a deposit was made in this example.

Note that running with `autocommit' enabled does not solve this
problem. When Connector/J encounters a communication problem, there is
no means to determine whether the server processed the currently
executing statement or not. The following theoretical states are
equally possible:

   * The server never received the statement, and therefore no related
     processing occurred on the server.

   * The server received the statement, executed it in full, but the
     response was not received by the client.

If you are running with `autocommit' enabled, it is not possible to
guarantee the state of data on the server when a communication
exception is encountered.  The statement may have reached the server,
or it may not.  All you know is that communication failed at some point,
before the client received confirmation (or data) from the server. This
does not only affect `autocommit' statements though. If the
communication problem occurred during `Connection.commit()', the
question arises of whether the transaction was committed on the server
before the communication failed, or whether the server received the
commit request at all.

The second reason for the generation of exceptions is that
transaction-scoped contextual data may be vulnerable, for example:

   * Temporary tables.

   * User-defined variables.

   * Server-side prepared statements.

These items are lost when a connection fails, and if the connection
silently reconnects without generating an exception, this could be
detrimental to the correct execution of your application.

In summary, communication errors generate conditions that may well be
unsafe for Connector/J to simply ignore by silently reconnecting. It is
necessary for the application to be notified. It is then for the
application developer to decide how to proceed in the event of
connection errors and failures.

*23.3.15.14: ** How can I use 3-byte UTF8 with Connector/J?  *

To use 3-byte UTF8 with Connector/J set `characterEncoding=utf8' and set
`useUnicode=true' in the connection string.

*23.3.15.15: ** How can I use 4-byte UTF8, `utf8mb4' with Connector/J?
*

To use 4-byte UTF8 with Connector/J configure the MySQL server with
`character_set_server=utf8mb4'.  Connector/J will then use that setting
as long as `characterEncoding' has not been set in the connection
string. This is equivalent to autodetection of the character set.

*23.3.15.16: ** Using `useServerPrepStmts=false' and certain character
encodings can lead to corruption when inserting BLOBs. How can this be
avoided?  *

When using certain character encodings, such as SJIS, CP932, and BIG5,
it is possible that BLOB data contains characters that can be
interpreted as control characters, for example, backslash, '\'. This
can lead to corrupted data when inserting BLOBs into the database.
There are two things that need to be done to avoid this:

  1. Set the connection string option `useServerPrepStmts' to `true'.

  2. Set `SQL_MODE' to `NO_BACKSLASH_ESCAPES'.


File: manual.info,  Node: connector-j-usagenotes-known-issues-limitations,  Next: connector-j-support,  Prev: connector-j-usagenotes-troubleshooting,  Up: connector-j

22.3.16 Known Issues and Limitations
------------------------------------

The following are some known issues and limitations for MySQL
Connector/J:

   * When Connector/J retrieves timestamps for a daylight saving time
     (DST) switch day using the `getTimeStamp()' method on the result
     set, some of the returned values might be wrong. The errors can be
     avoided by using the following connection options when connecting
     to a database:

                  useTimezone=true
                  useLegacyDatetimeCode=false
                  serverTimezone=UTC


File: manual.info,  Node: connector-j-support,  Prev: connector-j-usagenotes-known-issues-limitations,  Up: connector-j

22.3.17 Connector/J Support
---------------------------

* Menu:

* connector-j-support-community::  Connector/J Community Support
* connector-j-support-bug-report::  How to Report Connector/J Bugs or Problems


File: manual.info,  Node: connector-j-support-community,  Next: connector-j-support-bug-report,  Prev: connector-j-support,  Up: connector-j-support

22.3.17.1 Connector/J Community Support
.......................................

Oracle provides assistance to the user community by means of its
mailing lists. For Connector/J related issues, you can get help from
experienced users by using the MySQL and Java mailing list.  Archives
and subscription information is available online at
`http://lists.mysql.com/java'.

For information about subscribing to MySQL mailing lists or to browse
list archives, visit `http://lists.mysql.com/'. See *Note
mailing-lists::.

Community support from experienced users is also available through the
JDBC Forum (http://forums.mysql.com/list.php?39). You may also find
help from other users in the other MySQL Forums, located at
`http://forums.mysql.com'. See *Note forums::.


File: manual.info,  Node: connector-j-support-bug-report,  Prev: connector-j-support-community,  Up: connector-j-support

22.3.17.2 How to Report Connector/J Bugs or Problems
....................................................

The normal place to report bugs is `http://bugs.mysql.com/', which is
the address for our bugs database. This database is public, and can be
browsed and searched by anyone. If you log in to the system, you will
also be able to enter new reports.

If you find a sensitive security bug in MySQL Server, please let us
know immediately by sending an email message to
<secalert_us@oracle.com>. Exception: Support customers should report
all problems, including security bugs, to Oracle Support at
`http://support.oracle.com/'.

Writing a good bug report takes patience, but doing it right the first
time saves time both for us and for yourself. A good bug report,
containing a full test case for the bug, makes it very likely that we
will fix the bug in the next release.

This section will help you write your report correctly so that you do
not waste your time doing things that may not help us much or at all.

If you have a repeatable bug report, please report it to the bugs
database at `http://bugs.mysql.com/'. Any bug that we are able to
repeat has a high chance of being fixed in the next MySQL release.

To report other problems, you can use one of the MySQL mailing lists.

Remember that it is possible for us to respond to a message containing
too much information, but not to one containing too little. People
often omit facts because they think they know the cause of a problem
and assume that some details do not matter.

A good principle is this: If you are in doubt about stating something,
state it. It is faster and less troublesome to write a couple more
lines in your report than to wait longer for the answer if we must ask
you to provide information that was missing from the initial report.

The most common errors made in bug reports are (a) not including the
version number of Connector/J or MySQL used, and (b) not fully
describing the platform on which Connector/J is installed (including
the JVM version, and the platform type and version number that MySQL
itself is installed on).

This is highly relevant information, and in 99 cases out of 100, the
bug report is useless without it. Very often we get questions like,
`Why doesn't this work for me?' Then we find that the feature requested
wasn't implemented in that MySQL version, or that a bug described in a
report has already been fixed in newer MySQL versions.

Sometimes the error is platform-dependent; in such cases, it is next to
impossible for us to fix anything without knowing the operating system
and the version number of the platform.

If at all possible, create a repeatable, standalone testcase that
doesn't involve any third-party classes.

To streamline this process, we ship a base class for testcases with
Connector/J, named 'com.mysql.jdbc.util.BaseBugReport'. To create a
testcase for Connector/J using this class, create your own class that
inherits from com.mysql.jdbc.util.BaseBugReport and override the
methods `setUp()', `tearDown()' and `runTest()'.

In the `setUp()' method, create code that creates your tables, and
populates them with any data needed to demonstrate the bug.

In the `runTest()' method, create code that demonstrates the bug using
the tables and data you created in the `setUp' method.

In the `tearDown()' method, drop any tables you created in the
`setUp()' method.

In any of the above three methods, use one of the variants of the
`getConnection()' method to create a JDBC connection to MySQL:

   * `getConnection()' - Provides a connection to the JDBC URL
     specified in `getUrl()'.  If a connection already exists, that
     connection is returned, otherwise a new connection is created.

   * `getNewConnection()' - Use this if you need to get a new
     connection for your bug report (that is, there is more than one
     connection involved).

   * `getConnection(String url)' - Returns a connection using the given
     URL.

   * `getConnection(String url, Properties props)' - Returns a
     connection using the given URL and properties.

If you need to use a JDBC URL that is different from
'jdbc:mysql:///test', override the method `getUrl()' as well.

Use the `assertTrue(boolean expression)' and `assertTrue(String
failureMessage, boolean expression)' methods to create conditions that
must be met in your testcase demonstrating the behavior you are
expecting (vs. the behavior you are observing, which is why you are
most likely filing a bug report).

Finally, create a `main()' method that creates a new instance of your
testcase, and calls the `run' method:

     public static void main(String[] args) throws Exception {
           new MyBugReport().run();
      }

Once you have finished your testcase, and have verified that it
demonstrates the bug you are reporting, upload it with your bug report
to `http://bugs.mysql.com/'.


File: manual.info,  Node: connector-cpp,  Next: connector-c,  Prev: connector-j,  Up: connectors-apis

22.4 MySQL Connector/C++
========================

* Menu:

* connector-cpp-downloading::    How to Get MySQL Connector/C++
* connector-cpp-installation-binary::  Installing MySQL Connector/C++ from a Binary Distribution
* connector-cpp-installation-source::  Installing MySQL Connector/C++ from Source
* connector-cpp-apps-windows-visual-studio::  Building MySQL Connector/C++ Windows Applications with Microsoft Visual Studio
* connector-cpp-apps-linux-netbeans::  Building MySQL Connector/C++ Linux Applications with NetBeans
* connector-cpp-getting-started-examples::  MySQL Connector/C++ Getting Started: Usage Examples
* connector-cpp-tutorials::      MySQL Connector/C++ Tutorials
* connector-cpp-debug-tracing::  MySQL Connector/C++ Debug Tracing
* connector-cpp-usage-notes::    MySQL Connector/C++ Usage Notes
* connector-cpp-bugs::           MySQL Connector/C++ Known Bugs and Issues
* connector-cpp-support::        MySQL Connector/C++ Support

MySQL Connector/C++ is a MySQL database connector for C++. It lets you
develop C++ applications that connect to the MySQL Server.

For release notes detailing the changes in each release of MySQL
Connector/C++, see MySQL Connector/C++ Release Notes
(http://dev.mysql.com/doc/relnotes/connector-cpp/en/).

* MySQL Connector/C++ Benefits *

MySQL Connector/C++ offers the following benefits for C++ users
compared to the MySQL C API (MySQL client library):

   * Convenience of pure C++; no C function calls required

   * Supports JDBC 4.0, an industry standard API

   * Supports the object-oriented programming paradigm

   * Reduces development time

   * Licensed under the GPL with the FLOSS License Exception

   * Available under a commercial license upon request

* JDBC Compatibility *

MySQL Connector/C++ is compatible with the JDBC 4.0 API. MySQL
Connector/C++ does not implement the entire JDBC 4.0 API, but does
feature the following classes:

   * Connection

   * DatabaseMetaData

   * Driver

   * PreparedStatement

   * ResultSet

   * ResultSetMetaData

   * Savepoint

   * Statement

The JDBC 4.0 API defines approximately 450 methods for the classes just
mentioned. MySQL Connector/C++ implements approximately 80% of these.

* Platform Support and Prerequisites *

MySQL Connector/C++ requires:

   * MySQL 5.1 or later

   * Microsoft Visual Studio 2003 or later on Windows

The release has been successfully compiled and tested on the following
platforms:

*AIX*

   * 5.2 (PPC32, PPC64)

   * 5.3 (PPC32, PPC64)

*FreeBSD*

   * 6.0 (x86, x86_64)

*HPUX*

   * 11.11 (PA-RISC 32bit, PA-RISC 64bit)

*Linux*

   * Debian 3.1 (PPC32, x86)

   * FC4 (x86)

   * RHEL 3 (x86, x86_64)

   * RHEL 4 (x86, x86_64)

   * RHEL 5 (x86, x86_64)

   * RHEL 6 (x86, x86_64)

   * SLES 9 (x86, x86_64)

   * SLES 10 (x86_64)

   * SuSE 10.3, (x86_64)

   * Ubuntu 8.04 (x86)

   * Ubuntu 8.10 (x86_64)

*Mac OS X*

   * Mac OS X 10.3 (PPC32, PPC64)

   * Mac OS X 10.4 (PPC32, PPC64, x86)

   * Mac OS X 10.5 (PPC32, PPC64, x86, x86_64)

*Solaris*

   * Solaris 8 (SPARC32, SPARC64, x86)

   * Solaris 9 (SPARC32, SPARC64, x86)

   * Solaris 10 (SPARC32, SPARC64, x86, x86_64)

*Windows*

   * XP Professional (32bit)

   * 2003 (64bit)

* Release Status *

MySQL Connector/C++ is available as a Generally Available (GA) version.
We ask users and developers to try it out and provide feedback.

Note that MySQL Workbench is successfully using MySQL Connector/C++.

If you have any queries, please *Note contact us: connector-cpp-support.

* Licensing *

MySQL Connector/C++ is licensed under the terms of the GPL, like most
MySQL Connectors. There are special exceptions to the terms and
conditions of the GPL as applied to this software; see FLOSS License
Exception.  If you need a non-GPL license for commercial distribution,
please contact us.


File: manual.info,  Node: connector-cpp-downloading,  Next: connector-cpp-installation-binary,  Prev: connector-cpp,  Up: connector-cpp

22.4.1 How to Get MySQL Connector/C++
-------------------------------------

Binary and source packages can be obtained from MySQL Connector/C++
downloads (http://dev.mysql.com/downloads/connector/cpp/).

* MySQL Connector/C++ Binary Distributions *

Binary distributions are available for these platforms:

Microsoft Windows:

   * MSI installer package

   * Without installer (a Zip file)

Other platforms:

   * Compressed GNU TAR archive (`tar.gz')

* MySQL Connector/C++ Source Distributions *

Source packages use compressed GNU TAR file (`tar.gz') format and can
be used on any supported platform.

* MySQL Connector/C++ Source Repository *

The latest development sources are available through Launchpad
(https://launchpad.net/mysql-connector-cpp).

The MySQL Connector/C++ code repository uses Bazaar. To check out the
latest source code, use the `bzr' command-line tool:

     shell> bzr branch lp:~mysql/mysql-connector-cpp/trunk .


File: manual.info,  Node: connector-cpp-installation-binary,  Next: connector-cpp-installation-source,  Prev: connector-cpp-downloading,  Up: connector-cpp

22.4.2 Installing MySQL Connector/C++ from a Binary Distribution
----------------------------------------------------------------

*Caution*:

One problem that can occur is when the tools you use to build your
application are not compatible with the tools used to build the binary
versions of MySQL Connector/C++. Ideally, build your application with
the same tools that were used to build the MySQL Connector/C++ binaries.
To help with this, the following resources are provided.

All distributions include a `README' file that contains
platform-specific notes. At the end of the `README' file contained in
the binary distribution, you will find the settings used to build the
binaries. If you experience build-related issues on a platform, it may
help to check the settings used on the platform to build the binary.

Developers using Microsoft Windows must satisfy the following
requirements:

  1. Use a supported version of Visual Studio, either Visual Studio
     2005 or Visual Studio 2008.

  2. Ensure that your application uses the same runtime library as that
     used to build MySQL Connector/C++. Visual Studio 2005 builds use
     Microsoft.VC80.CRT (8.0.50727.762), and Visual Studio 2008 builds
     use Microsoft.VC90.CRT (9.0.21022.8).

  3. Your application should use the same linker configuration as MySQL
     Connector/C++. For example, use one of `/MD', `/MDd', `/MT', or
     `/MTd'.

To use a variation of the requirements previously listed, such as a
different compiler version, release configuration, or runtime library,
compile MySQL Connector/C++ from source using your desired settings and
ensure that your application is built using these same settings. To
avoid issues, ensure that the three variables of compiler version,
runtime library, and runtime linker configuration settings are the same
for both application and MySQL Connector/C++ itself.

A better solution that ensures compatibility is to build your MySQL
Connector/C++ libraries from the source code using the same tools that
you use to build your application.

*Downloading MySQL Connector/C++*

Binary packages can be obtained from MySQL Connector/C++ downloads
(http://dev.mysql.com/downloads/connector/cpp/).

*Archive Package*

Unpack the distribution archive into an appropriate directory. If you
plan to use a dynamically linked version of MySQL Connector/C++, make
sure that your system can reference the MySQL client library (MySQL
Connector/C++ is linked against and thus requires the MySQL client
library).  Consult your operating system documentation on how to modify
and expand the search path for libraries. If you cannot modify the
library search path, it may help to copy your application, the MySQL
Connector/C++ library and the MySQL client library into the same
directory. Most systems search for libraries in the current directory.

Windows users can choose between two binary packaging formats:

   * Windows MSI Installer (`.msi' file): To use the MSI Installer,
     launch it and follow the prompts in the screens it presents to
     install MySQL Connector/C in the location of your choosing.

   * Zip archive without installer (`.zip' file): To use a Zip archive,
     unpack it in the directory where you intend to install it using
     `WinZip' or another tool that can read `.zip' files.

*Windows MSI Installer*

Using the MSI Installer may be the easiest solution. The MSI Installer
does not require any administrative permissions as it simply copies
files.

The MSI Installer begins by presenting a welcome screen.

FIGURE GOES HERE: MSI Installer Welcome Screen

The MSI Installer overview screen enables you to select the type of
installation you want to perform. The `Typical' installation consists
of all required header files and the Release libraries. The `Custom'
installation enables you to install additional Debug versions of the
connector libraries.

FIGURE GOES HERE: MSI Installer Overview Screen

If you select a `Custom' installation, the MSI Installer presents a
Custom Setup screen that enables you to select which features to
install and where to install them.

FIGURE GOES HERE: MSI Installer Custom Setup Screen


File: manual.info,  Node: connector-cpp-installation-source,  Next: connector-cpp-apps-windows-visual-studio,  Prev: connector-cpp-installation-binary,  Up: connector-cpp

22.4.3 Installing MySQL Connector/C++ from Source
-------------------------------------------------

* Menu:

* connector-cpp-installation-source-unix::  Building MySQL Connector/C++ from Source on Unix, Solaris, and Mac OS X
* connector-cpp-installation-source-windows::  Building MySQL Connector/C++ from Source on Windows
* connector-cpp-dynamic-linking-client-library::  Dynamically Linking MySQL Connector/C++ Against the MySQL Client Library

MySQL Connector/C++ is based on the MySQL client library (MySQL C API)
and is linked against it. Thus, to compile MySQL Connector/C++, the
MySQL Client Library must be installed.

You also need the cross-platform build tool `CMake' 2.4, or newer, and
GLib 2.2.3 or newer.  Check the `README' file included with the
distribution for platform-specific notes.

Typically, the MySQL client library is installed when the MySQL Server
is installed. However, check your operating system documentation for
other installation options.

As of MySQL Connector/C++ 1.1.0, the Boost C++ libraries 1.34.0 or
newer must be installed. Boost is required only to build the connector,
required to use the connector. You can obtain Boost and its
installation instructions from the official site
(http://www.boost.org). Once Boost is installed, tell the build system
where the Boost files are by defining the `BOOST_ROOT:STRING' option.
This can be done when you invoke `CMake'. For example:

     shell> cmake . -DBOOST_ROOT:STRING=/usr/local/boost_1_40_0

Change `/usr/local/boost_1_40_0/' as necessary to match your
installation. For further details, see *Note
connector-cpp-installation-source-unix:: and *Note
connector-cpp-installation-source-windows::.


File: manual.info,  Node: connector-cpp-installation-source-unix,  Next: connector-cpp-installation-source-windows,  Prev: connector-cpp-installation-source,  Up: connector-cpp-installation-source

22.4.3.1 Building MySQL Connector/C++ from Source on Unix, Solaris, and Mac OS X
................................................................................

  1. Change location to the top-level directory of the source
     distribution:

          shell> cd /PATH/TO/MYSQL-CONNECTOR-CPP

  2. Run `CMake' to build a `Makefile':

          shell> cmake .
          -- Check for working C compiler: /usr/local/bin/gcc
          -- Check for working C compiler: /usr/local/bin/gcc -- works
          [...]
          -- Generating done
          -- Build files have been written to: /PATH/TO/MYSQL-CONNECTOR-CPP/

     On non-Windows systems, `CMake' first checks to see if the `CMake'
     variable `MYSQL_CONFIG_EXECUTABLE' is set. If it is not found,
     `CMake' tries to locate `mysql_config' in the default locations.

     If you have any problems with the configuration process, check the
     troubleshooting instructions given later.

  3. Use `make' to build the libraries. First make sure you have a
     clean build:

          shell> make clean

     Then build the connector:

          shell> make
          [  1%] Building CXX object »
          driver/CMakeFiles/mysqlcppconn.dir/mysql_connection.o
          [  3%] Building CXX object »
          driver/CMakeFiles/mysqlcppconn.dir/mysql_constructed_resultset.o
          [...]
          [100%] Building CXX object examples/CMakeFiles/statement.dir/statement.o
          Linking CXX executable statement

     If all goes well, you will find the MySQL Connector/C++ library in
     the `driver' directory.

  4. Install the header and library files:

          shell> make install

     Unless you have changed the location in the configuration step,
     `make install' copies the header files to the directory
     `/usr/local/include'. The header files copied are
     `mysql_connection.h' and `mysql_driver.h'.

     Again, unless you have specified otherwise, `make install' copies
     the library files to `/usr/local/lib'. The files copied are the
     dynamic library `libmysqlcppconn.so', and the static library
     `libmysqlcppconn-static.a'. The extension of the dynamic library
     might be different on your system (for example, `.dylib' on Mac OS
     X).

If you encounter any errors, please first carry out these checks:

  1. `CMake' options: MySQL installation path, debug version and more

     In case of configuration or compilation problems, check the list
     of `CMake' options:

          shell> cmake -L
          [...]
          CMAKE_BACKWARDS_COMPATIBILITY:STRING=2.4
          CMAKE_BUILD_TYPE:STRING=
          CMAKE_INSTALL_PREFIX:PATH=/usr/local
          EXECUTABLE_OUTPUT_PATH:PATH=
          LIBRARY_OUTPUT_PATH:PATH=
          MYSQLCPPCONN_GCOV_ENABLE:BOOL=0
          MYSQLCPPCONN_TRACE_ENABLE:BOOL=0
          MYSQL_CONFIG_EXECUTABLE:FILEPATH=/usr/bin/mysql_config

     For example, if your MySQL Server installation path is not
     `/usr/local/mysql' and you want to build a debug version of the
     MySQL Connector/C++, use this command:

          shell> cmake \
            -D CMAKE_BUILD_TYPE:STRING=Debug \
            -D MYSQL_CONFIG_EXECUTABLE=/PATH/TO/MY/MYSQL/SERVER/bin/mysql_config .

  2. Verify your settings with `cmake `-L'':

          shell> cmake -L
          [...]
          CMAKE_BACKWARDS_COMPATIBILITY:STRING=2.4
          CMAKE_BUILD_TYPE:STRING=
          CMAKE_INSTALL_PREFIX:PATH=/usr/local
          EXECUTABLE_OUTPUT_PATH:PATH=
          LIBRARY_OUTPUT_PATH:PATH=
          MYSQLCPPCONN_GCOV_ENABLE:BOOL=0
          MYSQLCPPCONN_TRACE_ENABLE:BOOL=0
          MYSQL_CONFIG_EXECUTABLE=/PATH/TO/MY/MYSQL/SERVER/bin/mysql_config

     Proceed by executing a `make clean' command followed by a `make'
     command, as described previously.

Once you have installed MySQL Connector/C++, you can carry out a quick
test to check the installation. To do this, compile and run one of the
example programs, such as `examples/standalone_example.cpp'. This
example is discussed in more detail later, but for now, you can use it
to test whether the connector has been correctly installed. This
procedure assumes that you have a working MySQL Server to which you can
connect. It also assumes header and library locations of
`/usrlocal/include' and `/usr/local/lib', respectively; adjust these as
necessary for your system.

  1. Compile the example program. To do this, change location to the
     `examples' directory and enter this command:

          shell> g++ -o test_install \
            -I/usr/local/include -I/usr/local/include/cppconn \
            -Wl,-Bdynamic -lmysqlcppconn standalone_example.cpp

  2. Make sure the dynamic library which is used in this case can be
     found at runtime:

          shell> export LD_LIBRARY_PATH=/usr/local/lib

  3. Now run the program to test your installation, substituting the
     appropriate host, user, password, and database names for your
     system:

          shell> ./test_install localhost root password database

     You should see output similar to the following:

          Connector/C++ standalone program example...

          ... running 'SELECT 'Welcome to Connector/C++' AS _message'
          ... MySQL replies: Welcome to Connector/C++
          ... say it again, MySQL
          ....MySQL replies: Welcome to Connector/C++

          ... find more at http://www.mysql.com

     If you see any errors, take note of them and go through the
     troubleshooting procedures discussed earlier.


File: manual.info,  Node: connector-cpp-installation-source-windows,  Next: connector-cpp-dynamic-linking-client-library,  Prev: connector-cpp-installation-source-unix,  Up: connector-cpp-installation-source

22.4.3.2 Building MySQL Connector/C++ from Source on Windows
............................................................

*Note*:

The only compiler formally supported for Windows is Microsoft Visual
Studio 2003 and above.

The basic steps for building the connector on Windows are the same as
for Unix. It is important to use `CMake' 2.6.2 or newer to generate
build files for your compiler and to invoke the compiler.

*Note*:

On Windows, `mysql_config' is not present, so `CMake' attempts to
retrieve the location of MySQL from the environment variable
`$ENV{MYSQL_DIR}'. If `MYSQL_DIR' is not set, `CMake' then proceeds to
check for MySQL in the following locations:
`$ENV{ProgramFiles}/MySQL/*/include', and
`$ENV{SystemDrive}/MySQL/*/include'.

`CMake' makes it easy for you to try other compilers. However, you may
experience compile warnings, compile errors or linking issues not
detected by Visual Studio. Patches are gratefully accepted to fix
issues with other compilers.

Consult the `CMake' manual or check `cmake --help' to find out which
build systems are supported by your `CMake' version:

     C:\>cmake --help
     cmake version 2.6-patch 2
     Usage
     [...]
     Generators

     The following generators are available on this platform:
       Borland Makefiles           = Generates Borland makefiles.
       MSYS Makefiles              = Generates MSYS makefiles.
       MinGW Makefiles             = Generates a make file for use with
                                     mingw32-make.
       NMake Makefiles             = Generates NMake makefiles.
       Unix Makefiles              = Generates standard UNIX makefiles.
       Visual Studio 6             = Generates Visual Studio 6 project files.
       Visual Studio 7             = Generates Visual Studio .NET 2002 project
                                     files.
       Visual Studio 7 .NET 2003   = Generates Visual Studio .NET 2003 project
                                     files.
       Visual Studio 8 2005        = Generates Visual Studio .NET 2005 project
                                     files.
       Visual Studio 8 2005 Win64  = Generates Visual Studio .NET 2005 Win64
                                     project files.
       Visual Studio 9 2008        = Generates Visual Studio 9 2008 project fil
       Visual Studio 9 2008 Win64  = Generates Visual Studio 9 2008 Win64 proje
                                     files.
     [...]

It is likely that your `CMake' binary supports more compilers, known by
`CMake' as _generators_, than can actually be used to build MySQL
Connector/C++. We have built the connector using the following
generators:

   * Microsoft Visual Studio 8 (Visual Studio 2005)

   * Microsoft Visual Studio 9 (Visual Studio 2008, Visual Studio 2008
     Express)

   * NMake

Please see the building instructions for Unix, Solaris and Mac OS X for
troubleshooting and configuration hints.

Use these steps to build the connector:

  1. Change location to the top-level directory of the source
     distribution:

          shell> cd C:\PATH_TO_MYSQL_CPP

  2. Run `CMake' to generate build files for your generator:

     *Visual Studio*

           C:\>cmake -G "Visual Studio 9 2008"
          -- Check for working C compiler: cl
          -- Check for working C compiler: cl -- works
          -- Detecting C compiler ABI info
          -- Detecting C compiler ABI info - done
          -- Check for working CXX compiler: cl
          -- Check for working CXX compiler: cl -- works
          -- Detecting CXX compiler ABI info
          -- Detecting CXX compiler ABI info - done
          -- ENV{MYSQL_DIR} =
          -- MySQL Include dir: C:/Programme/MySQL/MySQL Server 5.5/include
          -- MySQL Library    : C:/Programs/MySQL/MySQL Server 5.5/lib/opt/mysqlclient.lib
          -- MySQL Library dir: C:/Programs/MySQL/MySQL Server 5.5/lib/opt
          -- MySQL CFLAGS:
          -- MySQL Link flags:
          -- MySQL Include dir: C:/Programs/MySQL/MySQL Server 5.5/include
          -- MySQL Library dir: C:/Programs/MySQL/MySQL Server 5.5/lib/opt
          -- MySQL CFLAGS:
          -- MySQL Link flags:
          -- Configuring cppconn
          -- Configuring test cases
          -- Looking for isinf
          -- Looking for isinf - not found
          -- Looking for isinf
          -- Looking for isinf - not found.
          -- Looking for finite
          -- Looking for finite - not found.
          -- Configuring C/J junit tests port
          -- Configuring examples
          -- Configuring done
          -- Generating done
          -- Build files have been written to: C:\PATH_TO_MYSQL_CPP
          C:\>dir *.sln *.vcproj
          [...]
          19.11.2008  12:16            23.332 MYSQLCPPCONN.sln
          [...]
          19.11.2008  12:16            27.564 ALL_BUILD.vcproj
          19.11.2008  12:16            27.869 INSTALL.vcproj
          19.11.2008  12:16            28.073 PACKAGE.vcproj
          19.11.2008  12:16            27.495 ZERO_CHECK.vcproj

     *NMake*

           C:\>cmake -G "NMake Makefiles"
          -- The C compiler identification is MSVC
          -- The CXX compiler identification is MSVC
          [...]
          -- Build files have been written to: C:\PATH_TO_MYSQL_CPP

  3. Use your compiler to build MySQL Connector/C++.

     *Visual Studio - GUI*

     Open the newly generated project files in the Visual Studio GUI or
     use a Visual Studio command line to build the driver.  The project
     files contain a variety of different configurations, debug and
     nondebug versions among them.

     *Visual Studio - NMake*

          C:\>nmake

          Microsoft (R) Program Maintenance Utility Version 9.00.30729.01
          Copyright (C) Microsoft Corporation.  All rights reserved.

          Scanning dependencies of target mysqlcppconn
          [  2%] Building CXX object driver/CMakeFiles/mysqlcppconn.dir/mysql_connection.obj
          mysql_connection.cpp
          [...]
          Linking CXX executable statement.exe
          [100%] Built target statement


File: manual.info,  Node: connector-cpp-dynamic-linking-client-library,  Prev: connector-cpp-installation-source-windows,  Up: connector-cpp-installation-source

22.4.3.3 Dynamically Linking MySQL Connector/C++ Against the MySQL Client Library
.................................................................................

*Note*:

This section refers to dynamic linking of MySQL Connector/C++ with the
client library, not dynamic linking of the application to MySQL
Connector/C++.

Precompiled binaries of MySQL Connector/C++ use static binding with the
client library by default.

An application that uses MySQL Connector/C++ can be either statically or
dynamically linked to the MySQL Connector/C++ libraries. MySQL
Connector/C++ is usually statically linked to the underlying MySQL
client library (or Connector/C). Note that, unless otherwise stated,
reference to the MySQL client library is also taken to include
Connector/C, which is a separately packaged, standalone version of the
MySQL client library. From MySQL Connector/C++ 1.1.0 on, it is possible
to also dynamically link to the underlying MySQL client library. The
ability of MySQL Connector/C++ to dynamically link to MySQL client
library is not enabled by default. Enabling this feature is done
through a compile-time option when compiling the MySQL Connector/C++
source code.

To use the ability to dynamically link the client library to MySQL
Connector/C++, define the `MYSQLCLIENT_STATIC_BINDING:BOOL' when
building the MySQL Connector/C++ source code:

     shell> rm CMakeCache.txt
     shell> cmake -DMYSQLCLIENT_STATIC_BINDING:BOOL=1 .
     shell> make clean
     shell> make
     shell> make install

Now, in your application, when creating a connection, MySQL
Connector/C++ will select and load a client library at runtime. It will
choose the client library by searching defined locations and
environment variables depending on the host operating system. It is
also possible when creating a connection in an application to define an
absolute path to the client library to be loaded at runtime. This can
be convenient if you have defined a standard location from which you
want the client library to be loaded.  This is sometimes done to
circumvent possible conflicts with other versions of the client library
that may be located on the system.


File: manual.info,  Node: connector-cpp-apps-windows-visual-studio,  Next: connector-cpp-apps-linux-netbeans,  Prev: connector-cpp-installation-source,  Up: connector-cpp

22.4.4 Building MySQL Connector/C++ Windows Applications with Microsoft Visual Studio
-------------------------------------------------------------------------------------

MySQL Connector/C++ is available as a static or dynamic library to use
with your application. This section describes how to link the library
to your application.

*Note*:

To avoid potential crashes, the build configuration of MySQL
Connector/C++ should match the build configuration of the application
using it. For example, do not use the release build of MySQL
Connector/C++ with a debug build of the client application.

*Static Library*

The MySQL Connector/C++ static library file is
`mysqlcppconn-static.lib'. You link this library statically with your
application. Also link against the files `libmysql.dll' and
`libmysql.lib'. At runtime, the application will require access to
`libmysql.dll'.

*Dynamic Library*

The MySQL Connector/C++ dynamic library file is `mysqlcppconn.dll'. To
build your client application, link it with the file
`mysqlcppconn.lib'. At runtime, the application will require access to
the files `mysqlcppconn.dll' and `libmysql.dll'.

*Building a MySQL Connector/C++ Application with Microsoft Visual
Studio*

The initial steps for building an application to use either the static
or dynamic library are the same. Some additional steps vary, depend on
whether you are building your application to use the static or dynamic
library.

  1. Select `File', `New', `Project' from the main menu.

     FIGURE GOES HERE: Creating a New Project

  2. In the wizard, select `Visual C++', `Win32'. From `Visual Studio
     Installed Templates', select the application type `Win32 Console
     Application'. Enter a name for the application, then click `OK', to
     move to the Win32 Application Wizard.

     FIGURE GOES HERE: The New Project Dialog Box

  3. In the Win32 Application Wizard, click `Application Settings' and
     ensure the defaults are selected. The radio button `Console
     application' and the check box `Precompiled headers' are selected.
     Click `Finish' to close the wizard.

     FIGURE GOES HERE: The Win32 Application Wizard

  4. From the drop down list box on the toolbar, change from the
     default `Debug' build to the `Release' build.

     FIGURE GOES HERE: Selecting the Release Build

  5. From the main menu select `Project', `Properties'. This can also
     be accessed using the hot key `ALT' + `F7'.

     FIGURE GOES HERE: Selecting Project Properties from the Main Menu

  6. Under `Configuration Properties', open the tree view.

  7. Select `C++', `General' in the tree view.

     FIGURE GOES HERE: Setting Properties

  8. Ensure that Visual Studio can find the MySQL include directory.
     This directory includes header files that can optionally be
     installed when installing MySQL Server.

     FIGURE GOES HERE: MySQL Include Directory

  9. In the `Additional Include Directories' text field, add the MySQL
     `include/' directory.

     FIGURE GOES HERE: Select Directory Dialog

 10. Also set the location of additional libraries that Visual Studio
     needs to build the application. These are located in the MySQL
     `lib/opt' directory, a subdirectory of the MySQL Server
     installation directory.

     FIGURE GOES HERE: Typical Contents of MySQL lib/opt Directory

 11. In the tree view, open `Linker', `General', `Additional Library
     Directories'.

     FIGURE GOES HERE: Additional Library Directories

 12. Add the `lib/opt' directory into the `Additional Library
     Directories' text field. This enables the library file
     `libmysql.lib' to be found.

     FIGURE GOES HERE: Additional Library Directories Dialog

The remaining steps depend on whether you are building an application
to use the MySQL Connector/C++ static or dynamic library. If you are
building your application to use the dynamic library, see *Note
connector-cpp-application-build-dynamic::. If you are building your
application to use the static library, carry out the following steps:

  1. Open `Linker', `Input', `Additional Dependencies'.

     FIGURE GOES HERE: Additional Dependencies

  2. Enter `mysqlcppconn-static.lib' and `libmysql.lib'.

     FIGURE GOES HERE: Adding Additional Dependencies

  3. By default `CPPCONN_PUBLIC_FUNC' is defined to declare functions
     to be compatible with an application that calls a DLL. If you are
     building an application to call the static library, ensure that
     function prototypes are compatible with this. In this case, define
     `CPPCONN_PUBLIC_FUNC' to be an empty string, so that functions are
     declared with the correct prototype.

     In the `Project', `Properties' tree view, under `C++',
     `Preprocessor', enter `CPPCONN_PUBLIC_FUNC=' into the
     `Preprocessor Definitions' text field.

     FIGURE GOES HERE: Setting the CPPCONN_PUBLIC_FUNC Define

     *Note*:

     Make sure you enter `CPPCONN_PUBLIC_FUNC=' and not
     `CPPCONN_PUBLIC_FUNC', so that it is defined as an empty string.

If you are building an application to use the MySQL Connector/C++
dynamically linked library, carry out these steps:

  1. Under `Linker', `Input', add `mysqlcppconn.lib' into the
     `Additional Dependencies' text field.

  2. `mysqlcppconn.dll' must be in the same directory as the
     application executable, or somewhere on the system's path, so that
     the application can access the MySQL Connector/C++ Dynamic Linked
     Library at runtime.

     Copy `mysqlcppconn.dll' to the same directory as the application.
     Alternatively, extend the `PATH' environment variable using `SET
     PATH=%PATH%;C:\path\to\cpp'.  Alternatively, you can copy
     `mysqlcppconn.dll' to the Windows installation Directory, typically
     `c:\windows'.


File: manual.info,  Node: connector-cpp-apps-linux-netbeans,  Next: connector-cpp-getting-started-examples,  Prev: connector-cpp-apps-windows-visual-studio,  Up: connector-cpp

22.4.5 Building MySQL Connector/C++ Linux Applications with NetBeans
--------------------------------------------------------------------

This section describes how to build MySQL Connector/C++ applications
for Linux using the NetBeans IDE.

FIGURE GOES HERE: The NetBeans IDE

*Note*:

To avoid potential crashes, the build configuration of MySQL
Connector/C++ should match the build configuration of the application
using it. For example, do not use the release build of MySQL
Connector/C++ with a debug build of the client application.

  1. Create a new project. Select `File', `New Project'. Choose a `C/C++
     Application' and click `Next'.

  2. Give the project a name and click `Finish'. A new project is
     created.

  3. In the `Projects' tab, right-click `Source Files' and select
     `New', then `Main C++ File...'.

  4. Change the filename, or simply select the defaults and click
     `Finish' to add the new file to the project.

  5. Now add some working code to your main source file. Explore your
     MySQL Connector/C++ installation and navigate to the `examples'
     directory.

  6. Select a suitable example, such as `standalone_example_docs1.cpp'.
     Copy all the code in this file, and use it to replace the code in
     your existing main source file. Amend the code to reflect the
     connection properties required for your test database. You now
     have a working example that will access a MySQL database using
     MySQL Connector/C++.

  7. At this point, NetBeans shows some errors in the source code.
     Direct NetBeans to the necessary header files to include.  Select
     `File', `Project Properties' from the main menu.

  8. In the `Categories:' tree view panel, navigate to `Build', `C++
     Compiler'.

  9. In the `General' panel, select `Include Directories'.

 10. Click the `...' button.

 11. Click `Add', then navigate to the directory where the MySQL
     Connector/C++ header files are located. This is
     `/usr/local/include' unless you have installed the files to a
     different location. Click `Select'. Click `OK'.

     FIGURE GOES HERE: Setting the Header Include Directory

 12. Click `OK' again to close the `Project Properties' dialog.

At this point, you have created a NetBeans project containing a single
C++ source file. You have also ensured that the necessary include files
are accessible. Before continuing, decide whether your project is to
use the MySQL Connector/C++ static or dynamic library. The project
settings are slightly different in each case, because you link against
a different library.

*Using the Static Library*

To use the static MySQL Connector/C++ library, link against two library
files, `libmysqlcppconn-static.a' and `libmysqlclient.a'. The locations
of the files depend on your setup, but typically the former are in
`/usr/local/lib' and the latter in `/usr/lib'. The file
`libmysqlclient.a' is not part of MySQL Connector/C++, but is the MySQL
client library file distributed with MySQL Server.  (Remember, the
MySQL client library is an optional component as part of the MySQL
Server installation process.) The MySQL Client Library is also
available as part of the MySQL Connector/C distribution.

  1. Set the project to link the necessary library files. Select
     `File', `Project Properties' from the main menu.

  2. In the `Categories:' tree view, navigate to `Linker'.

  3. In the `General' panel, select `Additional Library Directories'.
     Click the `...' button.

  4. Select and add the `/usr/lib' and `/usr/local/lib' directories.

  5. In the same panel, add the two library files required for static
     linking as discussed earlier. The properties panel should then
     look similar to the following screenshot.

     FIGURE GOES HERE: Setting the Static Library Directories and File
     Names

  6. Click `OK' to close the `Project Properties' dialog.

*Using the Dynamic Library*

To use the MySQL Connector/C++ dynamic library, link your project with
a single library file, `libmysqlcppconn.so'. The location of this file
depends on how you configured your installation of MySQL Connector/C++,
but typically is `/usr/local/lib'.

  1. Set the project to link the necessary library file. Select `File',
     `Project Properties' from the main menu.

  2. In the `Categories:' tree view, navigate to `Linker'.

  3. In the `General' panel, select `Additional Library Directories'.
     Click the `...' button.

  4. Select and add the `/usr/local/lib' directories.

  5. In the same panel, add the library file required for static
     linking as discussed earlier. The properties panel should look
     similar to the following screenshot.

     FIGURE GOES HERE: Setting the Dynamic Library Directory and File
     Name

  6. Click OK to close the Project Properties dialog.

After configuring your project, build it by selecting `Run', `Build
Main Project' from the main menu. You then run the project using `Run',
`Run Main Project'.

On running the application, you should see a screen similar to the
following (this is actually the static version of the application
shown):

FIGURE GOES HERE: The Example Application Running

*Note*:

The preceding settings and procedures were carried out for the default
`Debug' configuration. To create a `Release' configuration, select that
configuration before setting the Project Properties.


File: manual.info,  Node: connector-cpp-getting-started-examples,  Next: connector-cpp-tutorials,  Prev: connector-cpp-apps-linux-netbeans,  Up: connector-cpp

22.4.6 MySQL Connector/C++ Getting Started: Usage Examples
----------------------------------------------------------

* Menu:

* connector-cpp-examples-connecting::  MySQL Connector/C++ Connecting to MySQL
* connector-cpp-examples-query::  MySQL Connector/C++ Running a Simple Query
* connector-cpp-examples-results::  MySQL Connector/C++ Fetching Results
* connector-cpp-examples-prepared-statements::  MySQL Connector/C++ Using Prepared Statements
* connector-cpp-examples-complete-example-1::  MySQL Connector/C++ Complete Example 1
* connector-cpp-examples-complete-example-2::  MySQL Connector/C++ Complete Example 2

The download package contains usage examples in the directory
`examples/'. These examples explain how to use the following classes:

   * Connection

   * Driver

   * PreparedStatement

   * ResultSet

   * ResultSetMetaData

   * Statement

The examples cover:

   * Using the Driver class to connect to MySQL

   * Creating tables, inserting rows, fetching rows using (simple)
     statements

   * Creating tables, inserting rows, fetching rows using prepared
     statements

   * Hints for working around prepared statement limitations

   * Accessing result set metadata

The examples in this document are only code snippets, not complete
programs. The code snippets provide a brief overview on the API.  For
complete programs, check the `examples/' directory of your MySQL
Connector/C++ installation Please also read the `README' file in that
directory. To test the example code, edit the `examples.h' file in the
`examples/' directory to add your connection information, then rebuild
the code by issuing a `make' command.

The examples in the `examples/' directory include:

   * `examples/connect.cpp':

     How to create a connection, insert data into MySQL and handle
     exceptions.

   * `examples/connection_meta_schemaobj.cpp':

     How to obtain metadata associated with a connection object, for
     example, a list of tables, databases, MySQL version, connector
     version.

   * `examples/debug_output.cpp':

     How to activate and deactivate the MySQL Connector/C++ debug
     protocol.

   * `examples/exceptions.cpp':

     A closer look at the exceptions thrown by the connector and how to
     fetch error information.

   * `examples/prepared_statements.cpp':

     How to run Prepared Statements including an example how to handle
     SQL statements that cannot be prepared by the MySQL Server.

   * `examples/resultset.cpp':

     How to use a cursor to fetch data and iterate over a result set.

   * `examples/resultset_meta.cpp':

     How to obtain metadata associated with a result set, for example,
     number of columns and column types.

   * `examples/resultset_types.cpp':

     Result sets returned from metadata methods. (This is more a test
     than an example.)

   * `examples/standalone_example.cpp':

     Simple standalone program not integrated into regular `CMake'
     builds.

   * `examples/statements.cpp':

     How to execute SQL statements without using Prepared Statements.

   * `examples/cpp_trace_analyzer.cpp':

     This example shows how to filter the output of the *Note debug
     trace: connector-cpp-debug-tracing. Please see the inline comments
     for further documentation. This script is unsupported.


File: manual.info,  Node: connector-cpp-examples-connecting,  Next: connector-cpp-examples-query,  Prev: connector-cpp-getting-started-examples,  Up: connector-cpp-getting-started-examples

22.4.6.1 MySQL Connector/C++ Connecting to MySQL
................................................

To establish a connection to MySQL Server, retrieve an instance of
sql::Connection from a sql::mysql::MySQL_Driver object. A
sql::mysql::MySQL_Driver object is returned by
sql::mysql::MySQL_Driver::get_mysql_driver_instance().

     sql::mysql::MySQL_Driver *driver;
     sql::Connection *con;

     driver = sql::mysql::MySQL_Driver::get_mysql_driver_instance();
     con = driver->connect("tcp://127.0.0.1:3306", "user", "password");

     delete con;

Make sure that you free, `con', the sql::Connection object as soon as
you do not need it any more. But do not explicitly free `driver', the
connector object! The connector will take care of freeing that.


File: manual.info,  Node: connector-cpp-examples-query,  Next: connector-cpp-examples-results,  Prev: connector-cpp-examples-connecting,  Up: connector-cpp-getting-started-examples

22.4.6.2 MySQL Connector/C++ Running a Simple Query
...................................................

For running simple queries, you can use the methods
sql::Statement::execute(), sql::Statement::executeQuery() and
sql::Statement::executeUpdate(). Use the method
sql::Statement::execute() if your query does not return a result set or
if your query returns more than one result set. See the `examples/'
directory for more information.

     sql::mysql::MySQL_Driver *driver;
     sql::Connection *con;
     sql::Statement *stmt;

     driver = sql::mysql::get_mysql_driver_instance();
     con = driver->connect("tcp://127.0.0.1:3306", "user", "password");

     stmt = con->createStatement();
     stmt->execute("USE " EXAMPLE_DB);
     stmt->execute("DROP TABLE IF EXISTS test");
     stmt->execute("CREATE TABLE test(id INT, label CHAR(1))");
     stmt->execute("INSERT INTO test(id, label) VALUES (1, 'a')");

     delete stmt;
     delete con;

Note that you must free sql::Statement and sql::Connection objects
explicitly using `delete'.


File: manual.info,  Node: connector-cpp-examples-results,  Next: connector-cpp-examples-prepared-statements,  Prev: connector-cpp-examples-query,  Up: connector-cpp-getting-started-examples

22.4.6.3 MySQL Connector/C++ Fetching Results
.............................................

The API for fetching result sets is identical for (simple) statements
and prepared statements. If your query returns one result set, use
sql::Statement::executeQuery() or sql::PreparedStatement::executeQuery()
to run your query. Both methods return sql::ResultSet objects. The
preview version does buffer all result sets on the client to support
cursors.


     // ...
     sql::Connection *con;
     sql::Statement *stmt;
     sql::ResultSet  *res;
     // ...
     stmt = con->createStatement();
     // ...

     res = stmt->executeQuery("SELECT id, label FROM test ORDER BY id ASC");
     while (res->next()) {
       // You can use either numeric offsets...
       cout << "id = " << res->getInt(1); // getInt(1) returns the first column
       // ... or column names for accessing results.
       // The latter is recommended.
       cout << ", label = '" << res->getString("label") << "'" << endl;
     }

     delete res;
     delete stmt;
     delete con;

*Note*:

In the preceding code snippet, column indexing starts from 1.

Note that you must free sql::Statement, sql::Connection and
sql::ResultSet objects explicitly using delete.

Cursor usage is demonstrated in the examples contained in the download
package.


File: manual.info,  Node: connector-cpp-examples-prepared-statements,  Next: connector-cpp-examples-complete-example-1,  Prev: connector-cpp-examples-results,  Up: connector-cpp-getting-started-examples

22.4.6.4 MySQL Connector/C++ Using Prepared Statements
......................................................

If you are not familiar with Prepared Statements on MySQL, take a look
at the source code comments and explanations in the file
`examples/prepared_statement.cpp'.

sql::PreparedStatement is created by passing an SQL query to
sql::Connection::prepareStatement(). As sql::PreparedStatement is
derived from sql::Statement, you will feel familiar with the API once
you have learned how to use (simple) statements (sql::Statement). For
example, the syntax for fetching results is identical.

     // ...
     sql::Connection *con;
     sql::PreparedStatement  *prep_stmt
     // ...

     prep_stmt = con->prepareStatement("INSERT INTO test(id, label) VALUES (?, ?)");

     prep_stmt->setInt(1, 1);
     prep_stmt->setString(2, "a");
     prep_stmt->execute();

     prep_stmt->setInt(1, 2);
     prep_stmt->setString(2, "b");
     prep_stmt->execute();

     delete prep_stmt;
     delete con;

As usual, you must free sql::PreparedStatement and sql::Connection
objects explicitly.


File: manual.info,  Node: connector-cpp-examples-complete-example-1,  Next: connector-cpp-examples-complete-example-2,  Prev: connector-cpp-examples-prepared-statements,  Up: connector-cpp-getting-started-examples

22.4.6.5 MySQL Connector/C++ Complete Example 1
...............................................

The following code shows a complete example of how to use MySQL
Connector/C++:

     /* Copyright 2008, 2010, Oracle and/or its affiliates. All rights reserved.

     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; version 2 of the License.

     There are special exceptions to the terms and conditions of the GPL
     as it is applied to this software. View the full text of the
     exception in file EXCEPTIONS-CONNECTOR-C++ in the directory of this
     software distribution.

     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.

     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
     */

     /* Standard C++ includes */
     #include <stdlib.h>
     #include <iostream>

     /*
       Include directly the different
       headers from cppconn/ and mysql_driver.h + mysql_util.h
       (and mysql_connection.h). This will reduce your build time!
     */
     #include "mysql_connection.h"

     #include <cppconn/driver.h>
     #include <cppconn/exception.h>
     #include <cppconn/resultset.h>
     #include <cppconn/statement.h>

     using namespace std;

     int main(void)
     {
     cout << endl;
     cout << "Running 'SELECT 'Hello World!' »
        AS _message'..." << endl;

     try {
       sql::Driver *driver;
       sql::Connection *con;
       sql::Statement *stmt;
       sql::ResultSet *res;

       /* Create a connection */
       driver = get_driver_instance();
       con = driver->connect("tcp://127.0.0.1:3306", "root", "root");
       /* Connect to the MySQL test database */
       con->setSchema("test");

       stmt = con->createStatement();
       res = stmt->executeQuery("SELECT 'Hello World!' AS _message");
       while (res->next()) {
         cout << "\t... MySQL replies: ";
         /* Access column data by alias or column name */
         cout << res->getString("_message") << endl;
         cout << "\t... MySQL says it again: ";
         /* Access column fata by numeric offset, 1 is the first column */
         cout << res->getString(1) << endl;
       }
       delete res;
       delete stmt;
       delete con;

     } catch (sql::SQLException &e) {
       cout << "# ERR: SQLException in " << __FILE__;
       cout << "(" << __FUNCTION__ << ") on line " »
          << __LINE__ << endl;
       cout << "# ERR: " << e.what();
       cout << " (MySQL error code: " << e.getErrorCode();
       cout << ", SQLState: " << e.getSQLState() << " )" << endl;
     }

     cout << endl;

     return EXIT_SUCCESS;
     }


File: manual.info,  Node: connector-cpp-examples-complete-example-2,  Prev: connector-cpp-examples-complete-example-1,  Up: connector-cpp-getting-started-examples

22.4.6.6 MySQL Connector/C++ Complete Example 2
...............................................

The following code shows a complete example of how to use MySQL
Connector/C++:

     /* Copyright 2008, 2010, Oracle and/or its affiliates. All rights reserved.

     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; version 2 of the License.

     There are special exceptions to the terms and conditions of the GPL
     as it is applied to this software. View the full text of the
     exception in file EXCEPTIONS-CONNECTOR-C++ in the directory of this
     software distribution.

     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.

     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
     */

     /* Standard C++ includes */
     #include <stdlib.h>
     #include <iostream>

     /*
       Include directly the different
       headers from cppconn/ and mysql_driver.h + mysql_util.h
       (and mysql_connection.h). This will reduce your build time!
     */
     #include "mysql_connection.h"

     #include <cppconn/driver.h>
     #include <cppconn/exception.h>
     #include <cppconn/resultset.h>
     #include <cppconn/statement.h>
     #include <cppconn/prepared_statement.h>

     using namespace std;

     int main(void)
     {
     cout << endl;
     cout << "Let's have MySQL count from 10 to 1..." << endl;

     try {
       sql::Driver *driver;
       sql::Connection *con;
       sql::Statement *stmt;
       sql::ResultSet *res;
       sql::PreparedStatement *pstmt;

       /* Create a connection */
       driver = get_driver_instance();
       con = driver->connect("tcp://127.0.0.1:3306", "root", "root");
       /* Connect to the MySQL test database */
       con->setSchema("test");

       stmt = con->createStatement();
       stmt->execute("DROP TABLE IF EXISTS test");
       stmt->execute("CREATE TABLE test(id INT)");
       delete stmt;

       /* '?' is the supported placeholder syntax */
       pstmt = con->prepareStatement("INSERT INTO test(id) VALUES (?)");
       for (int i = 1; i <= 10; i++) {
         pstmt->setInt(1, i);
         pstmt->executeUpdate();
       }
       delete pstmt;

       /* Select in ascending order */
       pstmt = con->prepareStatement("SELECT id FROM test ORDER BY id ASC");
       res = pstmt->executeQuery();

       /* Fetch in reverse = descending order! */
       res->afterLast();
       while (res->previous())
         cout << "\t... MySQL counts: " << res->getInt("id") << endl;
       delete res;

       delete pstmt;
       delete con;

     } catch (sql::SQLException &e) {
       cout << "# ERR: SQLException in " << __FILE__;
       cout << "(" << __FUNCTION__ << ") on line " »
          << __LINE__ << endl;
       cout << "# ERR: " << e.what();
       cout << " (MySQL error code: " << e.getErrorCode();
       cout << ", SQLState: " << e.getSQLState() << »
          " )" << endl;
     }

     cout << endl;

     return EXIT_SUCCESS;
     }


File: manual.info,  Node: connector-cpp-tutorials,  Next: connector-cpp-debug-tracing,  Prev: connector-cpp-getting-started-examples,  Up: connector-cpp

22.4.7 MySQL Connector/C++ Tutorials
------------------------------------

* Menu:

* connector-cpp-tutorials-background::  Prerequisites and Background Information
* connector-cpp-tutorials-stored-routines-statements::  Calling Stored Procedures with `Statement' Objects
* connector-cpp-tutorials-stored-routines-prepared-statements::  Calling Stored Procedures with `PreparedStatement' Objects

The following tutorials illustrate various aspects of using MySQL
Connector/C++.  Also consult the examples in *Note
connector-cpp-getting-started-examples::.


File: manual.info,  Node: connector-cpp-tutorials-background,  Next: connector-cpp-tutorials-stored-routines-statements,  Prev: connector-cpp-tutorials,  Up: connector-cpp-tutorials

22.4.7.1 Prerequisites and Background Information
.................................................

This section describes the prerequisites that must be satisifed before
you work through the remaining tutorial sections, and shows how to set
up the framework code that serves as the basis for the tutorial
applications.

These tutorials refer to tables and sample data from the `world'
database, which you can download from the `Example Databases' section
of the MySQL Documentation (http://dev.mysql.com/doc/index-other.html)
page.

Each tutorial application uses a framework consisting of the following
code. The examples vary at the line that says `/* INSERT TUTORIAL CODE
HERE! */' within the `try' block, which is replaced for each
application with the application-specific code.


     #include <stdlib.h>
     #include <iostream>
     #include <sstream>
     #include <stdexcept>
     /* uncomment for applications that use vectors */
     /*#include <vector>*/

     #include "mysql_connection.h"

     #include <cppconn/driver.h>
     #include <cppconn/exception.h>
     #include <cppconn/resultset.h>
     #include <cppconn/statement.h>
     #include <cppconn/prepared_statement.h>

     #define EXAMPLE_HOST "localhost"
     #define EXAMPLE_USER "worlduser"
     #define EXAMPLE_PASS "worldpass"
     #define EXAMPLE_DB "world"

     using namespace std;

     int main(int argc, const char **argv)
     {
       string url(argc >= 2 ? argv[1] : EXAMPLE_HOST);
       const string user(argc >= 3 ? argv[2] : EXAMPLE_USER);
       const string pass(argc >= 4 ? argv[3] : EXAMPLE_PASS);
       const string database(argc >= 5 ? argv[4] : EXAMPLE_DB);

       cout << "Connector/C++ tutorial framework..." << endl;
       cout << endl;

       try {

         /* INSERT TUTORIAL CODE HERE! */

       } catch (sql::SQLException &e) {
         /*
           MySQL Connector/C++ throws three different exceptions:

           - sql::MethodNotImplementedException (derived from sql::SQLException)
           - sql::InvalidArgumentException (derived from sql::SQLException)
           - sql::SQLException (derived from std::runtime_error)
         */
         cout << "# ERR: SQLException in " << __FILE__;
         cout << "(" << __FUNCTION__ << ") on line " << __LINE__ << endl;
         /* what() (derived from std::runtime_error) fetches error message */
         cout << "# ERR: " << e.what();
         cout << " (MySQL error code: " << e.getErrorCode();
         cout << ", SQLState: " << e.getSQLState() << " )" << endl;

         return EXIT_FAILURE;
       }

       cout << "Done." << endl;
       return EXIT_SUCCESS;
     }

Try the framework code as a standalone program using this procedure:

  1. Copy and paste the framework code to a file such as
     `framework.cpp'. Edit the `#define' statements to reflect your
     connection parameters (server, user, password, database).  Also,
     because the file contains those parameters, set its access mode to
     be readable only to yourself.

  2. Compile the framework. For example, on Mac OS X, the command might
     look like this (enter the command on one line):

          shell> g++ -o framework
            -I/usr/local/include -I/usr/local/include/cppconn
            -lmysqlcppconn framework.cpp

     Adapt the command as necessary for your system. A similar command
     is needed for the tutorial applications that follow.

  3. To run the framework, enter the following:

          shell> ./framework

     You will see a simple message:

          Connector/C++ tutorial framework...

          Done.

You are now ready to continue to the tutorials.


File: manual.info,  Node: connector-cpp-tutorials-stored-routines-statements,  Next: connector-cpp-tutorials-stored-routines-prepared-statements,  Prev: connector-cpp-tutorials-background,  Up: connector-cpp-tutorials

22.4.7.2 Calling Stored Procedures with `Statement' Objects
...........................................................

A stored procedure can be called using a `Statement' or
`PreparedStatement' object. This section shows how to call stored
procedures using `Statement' objects. To see how to use
`PreparedStatement' objects, see *Note
connector-cpp-tutorials-stored-routines-prepared-statements::.

You can construct and call different types of stored procedures:

  1. A stored procedure that returns no result. For example, such a
     stored procedure can log non-critical information, or change
     database data in a straightforward way.

  2. A stored procedure that returns one or more values using output
     parameters. For example, such a procedure can indicate success or
     failure, or retrieve and return data items.

  3. A stored procedure that returns one or more result sets. The
     procedure can execute one or more queries, each of which returns
     an arbitrary number of rows. Your application loops through each
     result set to display, transform, or otherwise process each row in
     it.

The following stored procedures illustrate each of these scenarios.

The following procedure adds a country to the `world' database, but
does not return a result.  This corresponds to Scenario 1 described
earlier.

     CREATE PROCEDURE add_country (IN country_code CHAR(3),
                                   IN country_name CHAR(52),
                                   IN continent_name CHAR(30))
     BEGIN
       INSERT INTO Country(Code, Name, Continent)
         VALUES (country_code, country_name, continent_name);
     END;

The next procedures use an output parameter to return the population of
a specified country or continent, or the entire world. These correspond
to Scenario 2 described earlier.

     CREATE PROCEDURE get_pop (IN country_name CHAR(52),
                               OUT country_pop BIGINT)
     BEGIN
       SELECT Population INTO country_pop FROM Country
         WHERE Name = country_name;
     END;

     CREATE PROCEDURE get_pop_continent (IN continent_name CHAR(30),
                                         OUT continent_pop BIGINT)
     BEGIN
       SELECT SUM(Population) INTO continent_pop FROM Country
         WHERE Continent = continent_name;
     END;

     CREATE PROCEDURE get_pop_world (OUT world_pop BIGINT)
     BEGIN
       SELECT SUM(Population) INTO world_pop FROM Country;
     END;

The next procedure returns several result sets. This corresponds to
Scenario 3 described earlier.


     CREATE PROCEDURE get_data ()
     BEGIN
       SELECT Code, Name, Population, Continent FROM Country
         WHERE Continent = 'Oceania' AND Population < 10000;
       SELECT Code, Name, Population, Continent FROM Country
         WHERE Continent = 'Europe' AND Population < 10000;
       SELECT Code, Name, Population, Continent FROM Country
         WHERE Continent = 'North America' AND Population < 10000;
     END;

Enter and test the stored procedures manually to ensure that they will
be available to your C++ applications. (Select `world' as the default
database before you create them.) You are now ready to start writing
applications using Connector/C++ that call stored procedures.

* Scenario 1: Using a `Statement' for a Stored Procedure That Returns
No Result *

This example shows how to call a stored procedure that returns no
result set.

  1. Make a copy of the tutorial framework code:

          shell> cp framework.cpp sp_scenario1.cpp

  2. Add the following code to the `try' block of the tutorial
     framework:


          sql::Driver* driver = get_driver_instance();
          std::auto_ptr<sql::Connection> con(driver->connect(url, user, pass));
          con->setSchema(database);
          std::auto_ptr<sql::Statement> stmt(con->createStatement());

          // We need not check the return value explicitly. If it indicates
          // an error, Connector/C++ generates an exception.
          stmt->execute("CALL add_country('ATL', 'Atlantis', 'North America')");

  3. Compile the program as described in *Note
     connector-cpp-tutorials-background::.

  4. Run the program:

          shell> ./sp_scenario1

  5. Using the *Note `mysql': mysql. command-line client or other
     suitable program, check the `world' database to determine that it
     has been updated correctly. You can use this query:

          mysql> SELECT Code, Name, Continent FROM Country WHERE Code='ATL';
          +------+----------+---------------+
          | Code | Name     | Continent     |
          +------+----------+---------------+
          | ATL  | Atlantis | North America |
          +------+----------+---------------+

The code in this application simply invokes the `execute' method,
passing to it a statement that calls the stored procedure. The
procedure itself returns no value, although it is important to note
there is always a return value from the *Note `CALL': call. statement;
this is the `execute' status. MySQL Connector/C++ handles this status
for you, so you need not handle it explicitly. If the `execute' call
fails for some reason, it raises an exception that the `catch' block
handles.

* Scenario 2: Using a `Statement' for a Stored Procedure That Returns
an Output Parameter *

This example shows how to handle a stored procedure that returns an
output parameter.

  1. Make a copy of the tutorial framework code:

          shell> cp framework.cpp sp_scenario2.cpp

  2. Add the following code to the `try' block of the tutorial
     framework:


          sql::Driver* driver = get_driver_instance();
          std::auto_ptr<sql::Connection> con(driver->connect(url, user, pass));
          con->setSchema(database);
          std::auto_ptr<sql::Statement> stmt(con->createStatement());

          stmt->execute("CALL get_pop('Uganda', @pop)");

          std::auto_ptr<sql::ResultSet> res(stmt->executeQuery("SELECT @pop AS _reply"));
          while (res->next())
            cout << "Population of Uganda: " << res->getString("_reply") << endl;

          stmt->execute("CALL get_pop_continent('Asia', @pop)");

          res.reset(stmt->executeQuery("SELECT @pop AS _reply"));
          while (res->next())
            cout << "Population of Asia: " << res->getString("_reply") << endl;

          stmt->execute("CALL get_pop_world(@pop)");

          res.reset(stmt->executeQuery("SELECT @pop AS _reply"));
          while (res->next())
            cout << "Population of World: " << res->getString("_reply") << endl;

  3. Compile the program as described in *Note
     connector-cpp-tutorials-background::.

  4. Run the program:

          shell> ./sp_scenario2
          Connector/C++ tutorial framework...

          Population of Uganda: 21778000
          Population of Asia: 3705025700
          Population of World: 6078749450
          Done.

In this scenario, each stored procedure sets the value of an output
parameter. This is not returned directly to the `execute' method, but
needs to be obtained using a subsequent query. If you were executing
the SQL statements directly, you might use statements similar to these:

     CALL get_pop('Uganda', @pop);
     SELECT @pop;
     CALL get_pop_continent('Asia', @pop);
     SELECT @pop;
     CALL get_pop_world(@pop);
     SELECT @pop;

In the C++ code, a similar sequence is carried out for each procedure
call:

   * Execute the *Note `CALL': call. statement.

   * Obtain the output parameter by executing an additional query.  The
     query produces a `ResultSet' object.

   * Retrieve the data using a `while' loop. The simplest way to do
     this is to use a `getString' method on the `ResultSet', passing
     the name of the variable to access. In this example `_reply' is
     used as a placeholder for the variable and therefore is used as the
     key to access the correct element of the result dictionary.

     Although the query used to obtain the output parameter returns
     only a single row, it is important to use the `while' loop to
     catch more than one row, to avoid the possibility of the
     connection becoming unstable.

* Scenario 3: Using a `Statement' for a Stored Procedure That Returns a
Result Set *

This example shows how to handle result sets produced by a stored
procedure.

*Note*:

This scenario requires MySQL 5.5.3 or higher. The client/server
protocol does not support fetching multiple result sets from stored
procedures prior to 5.5.3.

  1. Make a copy of the tutorial framework code:

          shell> cp framework.cpp sp_scenario3.cpp

  2. Add the following code to the `try' block of the tutorial
     framework:


          sql::Driver* driver = get_driver_instance();
          std::auto_ptr<sql::Connection> con(driver->connect(url, user, pass));
          con->setSchema(database);
          std::auto_ptr<sql::Statement> stmt(con->createStatement());

          stmt->execute("CALL get_data()");
          std::auto_ptr< sql::ResultSet > res;
          do {
            res.reset(stmt->getResultSet());
            while (res->next()) {
              cout << "Name: " << res->getString("Name")
                   << " Population: " << res->getInt("Population")
                   << endl;
            }
          } while (stmt->getMoreResults());

  3. Compile the program as described in *Note
     connector-cpp-tutorials-background::.

  4. Run the program:

          shell> ./sp_scenario3
          Connector/C++ tutorial framework...

          Name: Cocos (Keeling) Islands Population: 600
          Name: Christmas Island Population: 2500
          Name: Norfolk Island Population: 2000
          Name: Niue Population: 2000
          Name: Pitcairn Population: 50
          Name: Tokelau Population: 2000
          Name: United States Minor Outlying Islands Population: 0
          Name: Svalbard and Jan Mayen Population: 3200
          Name: Holy See (Vatican City State) Population: 1000
          Name: Anguilla Population: 8000
          Name: Atlantis Population: 0
          Name: Saint Pierre and Miquelon Population: 7000
          Done.

The code is similar to the examples shown previously. The code of
particular interest here is:


     do {
       res.reset(stmt->getResultSet());
       while (res->next()) {
         cout << "Name: " << res->getString("Name")
              << " Population: " << res->getInt("Population")
              << endl;
       }
     } while (stmt->getMoreResults());

The *Note `CALL': call. is executed as before, but this time the
results are returned into multiple `ResultSet' objects because the
stored procedure executes multiple `SELECT' statements. In this
example, the output shows that three result sets are processed, because
there are three `SELECT' statements in the stored procedure. Each
result set returns more than one row.

The results are processed using this code pattern:


     do {
       Get Result Set
       while (Get Result) {
         Process Result
       }
     } while (Get More Result Sets);

*Note*:

Use this pattern even if the stored procedure executes only a single
`SELECT' and produces only one result set. This is a requirement of the
underlying protocol.


File: manual.info,  Node: connector-cpp-tutorials-stored-routines-prepared-statements,  Prev: connector-cpp-tutorials-stored-routines-statements,  Up: connector-cpp-tutorials

22.4.7.3 Calling Stored Procedures with `PreparedStatement' Objects
...................................................................

This section shows how to call stored procedures using prepared
statements. It is recommended that, before working through it, you
first work through the previous tutorial *Note
connector-cpp-tutorials-stored-routines-statements::.  That section
shows the stored procedures required by the applications in this
section.

* Scenario 1: Using a `PreparedStatement' for a Stored Procedure That
Returns No Result *

This example shows how to call a stored procedure that returns no
result set.

  1. Make a copy of the tutorial framework code:

          shell> cp framework.cpp ps_scenario1.cpp

  2. Add the following code to the `try' block of the tutorial
     framework:


          vector<string> code_vector;
          code_vector.push_back("SLD");
          code_vector.push_back("DSN");
          code_vector.push_back("ATL");

          vector<string> name_vector;
          name_vector.push_back("Sealand");
          name_vector.push_back("Disneyland");
          name_vector.push_back("Atlantis");

          vector<string> cont_vector;
          cont_vector.push_back("Europe");
          cont_vector.push_back("North America");
          cont_vector.push_back("Oceania");

          sql::Driver * driver = get_driver_instance();

          std::auto_ptr< sql::Connection > con(driver->connect(url, user, pass));
          con->setSchema(database);

          std::auto_ptr< sql::PreparedStatement >  pstmt;

          pstmt.reset(con->prepareStatement("CALL add_country(?,?,?)"));
          for (int i=0; i<3; i++)
          {
            pstmt->setString(1,code_vector[i]);
            pstmt->setString(2,name_vector[i]);
            pstmt->setString(3,cont_vector[i]);

            pstmt->execute();
          }

     Also, uncomment `#include <vector>' near the top of the code,
     because vectors are used to store sample data.

  3. Compile the program as described in *Note
     connector-cpp-tutorials-background::.

  4. Run the program:

          shell> ./ps_scenario1

  5. You can check whether the database has been updated correctly by
     using this query:

          mysql> SELECT Code, Name, Continent FROM Country
              -> WHERE Code IN('DSN','ATL','SLD');
          +------+------------+---------------+
          | Code | Name       | Continent     |
          +------+------------+---------------+
          | ATL  | Atlantis   | Oceania       |
          | DSN  | Disneyland | North America |
          | SLD  | Sealand    | Europe        |
          +------+------------+---------------+

The code is relatively simple, as no processing is required to handle
result sets. The procedure call, `CALL add_country(?,?,?)', is made
using placeholders for input parameters denoted by `'?''. These
placeholders are replaced by the appropriate data values using the
`PreparedStatement' object's `setString' method. The `for' loop is set
up to iterate 3 times, as there are three data sets in this example.
The same `PreparedStatement' is executed three times, each time with
different input parameters.

* Scenario 2: Using a `PreparedStatement' for a Stored Procedure That
Returns an Output Parameter *

This example shows how to handle a stored procedure that returns an
output parameter.

  1. Make a copy of the tutorial framework code:

          shell> cp framework.cpp ps_scenario2.cpp

  2. Add the following code to the `try' block of the tutorial
     framework:


          vector<string> cont_vector;
          cont_vector.push_back("Europe");
          cont_vector.push_back("North America");
          cont_vector.push_back("Oceania");

          sql::Driver * driver = get_driver_instance();

          std::auto_ptr< sql::Connection > con(driver->connect(url, user, pass));
          con->setSchema(database);

          std::auto_ptr< sql::Statement > stmt(con->createStatement());
          std::auto_ptr< sql::PreparedStatement >  pstmt;
          std::auto_ptr< sql::ResultSet > res;

          pstmt.reset(con->prepareStatement("CALL get_pop_continent(?,@pop)"));

          for (int i=0; i<3; i++)
          {
            pstmt->setString(1,cont_vector[i]);
            pstmt->execute();
            res.reset(stmt->executeQuery("SELECT @pop AS _population"));
            while (res->next())
              cout << "Population of "
                   << cont_vector[i]
                   << " is "
                   << res->getString("_population") << endl;
          }

     Also, uncomment `#include <vector>' near the top of the code,
     because vectors are used to store sample data.

  3. Compile the program as described in *Note
     connector-cpp-tutorials-background::.

  4. Run the program:

          shell> ./ps_scenario2
          Connector/C++ tutorial framework...

          Population of Europe is 730074600
          Population of North America is 482993000
          Population of Oceania is 30401150
          Done.

In this scenario a `PreparedStatement' object is created that calls the
`get_pop_continent' stored procedure. This procedure takes an input
parameter, and also returns an output parameter. The approach used is
to create another statement that can be used to fetch the output
parameter using a `SELECT' query. Note that when the
`PreparedStatement' is created, the input parameter to the stored
procedure is denoted by '?'. Prior to execution of the prepared
statement, it is necessary to replace this placeholder by an actual
value. This is done using the `setString' method:

     pstmt->setString(1,cont_vector[i]);

Although the query used to obtain the output parameter returns only a
single row, it is important to use the `while' loop to catch more than
one row, to avoid the possibility of the connection becoming unstable.

* Scenario 3: Using a `PreparedStatement' for a Stored Procedure That
Returns a Result Set *

This example shows how to handle result sets produced by a stored
procedure.

*Note*:

This scenario requires MySQL 5.5.3 or higher. The client/server
protocol does not support fetching multiple result sets from stored
procedures prior to 5.5.3.

  1. Make a copy of the tutorial framework code:

          shell> cp framework.cpp ps_scenario3.cpp

  2. Add the following code to the `try' block of the tutorial
     framework:


          sql::Driver * driver = get_driver_instance();

          std::auto_ptr< sql::Connection > con(driver->connect(url, user, pass));
          con->setSchema(database);

          std::auto_ptr< sql::PreparedStatement >  pstmt;
          std::auto_ptr< sql::ResultSet > res;

          pstmt.reset(con->prepareStatement("CALL get_data()"));
          res.reset(pstmt->executeQuery());

          do {
            res.reset(pstmt->getResultSet());
            while (res->next()) {
              cout << "Name: " << res->getString("Name")
                   << " Population: " << res->getInt("Population")
                   << endl;
            }
          } while (pstmt->getMoreResults());

  3. Compile the program as described in *Note
     connector-cpp-tutorials-background::.

  4. Run the program:

          shell> ./ps_scenario3

  5. Make a note of the output generated.

The code executes the stored procedure using a `PreparedStatement'
object. The standard `do'/`while' construct is used to ensure that all
result sets are fetched. The returned values are fetched from the
result sets using the `getInt' and `getString' methods.


File: manual.info,  Node: connector-cpp-debug-tracing,  Next: connector-cpp-usage-notes,  Prev: connector-cpp-tutorials,  Up: connector-cpp

22.4.8 MySQL Connector/C++ Debug Tracing
----------------------------------------

Although a debugger can be used to debug your application, you may find
it beneficial to turn on the debug traces of the connector.  Some
problems happen randomly which makes them difficult to debug using a
debugger. In such cases, debug traces and protocol files are more
useful because they allow you to trace the activities of all instances
of your program.

DTrace is a very powerful technology to trace any application without
having to develop an extra trace module for your application.
Unfortunately, DTrace is currently only available on Solaris, Mac OS X
10.5, and FreeBSD.

MySQL Connector/C++ can write two trace files:

  1. Trace file generated by the MySQL client library

  2. Trace file generated internally by MySQL Connector/C++

The first trace file can be generated by the underlying MySQL client
library (`libmysqlclient'). To enable this trace, the connector will
call the *Note `mysql_debug()': mysql-debug. C API function internally.
Because only debug versions of the MySQL client library are capable of
writing a trace file, compile MySQL Connector/C++ against a debug
version of the library to use this trace. The trace shows the internal
function calls and the addresses of internal objects as shown here:

     >mysql_stmt_init
     | >_mymalloc
     | | enter: Size: 816
     | | exit: ptr: 0x68e7b8
     | <_mymalloc | >init_alloc_root
     | | enter: root: 0x68e7b8
     | | >_mymalloc
     | | | enter: Size: 2064
     | | | exit: ptr: 0x68eb28
     [...]

The second trace is the MySQL Connector/C++ internal trace. It is
available with debug and nondebug builds of the connector as long as you
have enabled the tracing module at compile time using `cmake
-DMYSQLCPPCONN_TRACE_ENABLE:BOOL=1'. By default, tracing functionality
is not available and calls to trace functions are removed by the
preprocessor.

Compiling the connector with tracing functionality enabled causes two
additional tracing function calls per each connector function call. For
example:

     |  INF: Tracing enabled
     <MySQL_Connection::setClientOption
     >MySQL_Prepared_Statement::setInt
     |  INF: this=0x69a2e0
     |  >MySQL_Prepared_Statement::checkClosed
     |  <MySQL_Prepared_Statement::checkClosed
     | <MySQL_Prepared_Statement::setInt
     [...]

Run your own benchmark to find out how much this will impact the
performance of your application.

A simple test using a loop running 30,000 *Note `INSERT': insert. SQL
statements showed no significant real-time impact. The two variants of
this application using a trace enabled and trace disabled version of
the connector performed equally well. The runtime measured in real time
was not significantly impacted as long as writing a debug trace was not
enabled. However, there will be a difference in the time spent in the
application. When writing a debug trace, the I/O subsystem may become a
bottleneck.

In summary, use connector builds with tracing enabled carefully.
Trace-enabled versions may cause higher CPU usage even if the overall
runtime of your application is not impacted significantly.

The example from `examples/debug_output.cpp' demonstrates how to
activate the debug traces in your program.  Currently they can only be
activated through API calls. The traces are controlled on a
per-connection basis. You can use the `setClientOptions()' method of a
connection object to activate and deactivate trace generation. The MySQL
client library trace is always written to a file, whereas the
connector's protocol messages are printed to the standard output.

     sql::Driver *driver;
     int on_off = 1;

     /* Using the Driver to create a connection */
     driver = get_driver_instance();
     std::auto_ptr< sql::Connection > con(driver->connect(host, user, pass));

     /*
     Activate debug trace of the MySQL client library (C API)
     Only available with a debug build of the MySQL client library!
     */
     con->setClientOption("libmysql_debug", "d:t:O,client.trace");

     /*
     Connector/C++ tracing is available if you have compiled the
     driver using cmake -DMYSQLCPPCONN_TRACE_ENABLE:BOOL=1
     */
     con->setClientOption("client_trace", &on_off);


File: manual.info,  Node: connector-cpp-usage-notes,  Next: connector-cpp-bugs,  Prev: connector-cpp-debug-tracing,  Up: connector-cpp

22.4.9 MySQL Connector/C++ Usage Notes
--------------------------------------

MySQL Connector/C++ is compatible with the JDBC 4.0 API. See the JDBC
overview (http://www.oracle.com/technetwork/java/overview-141217.html)
for information on JDBC 4.0. Please also check the `examples/'
directory of the download package.

   * The MySQL Connector/C++ sql::DataType class defines the following
     JDBC standard data types: `UNKNOWN', `BIT', `TINYINT', `SMALLINT',
     `MEDIUMINT', `INTEGER', `BIGINT', `REAL', `DOUBLE', `DECIMAL',
     `NUMERIC', `CHAR', `BINARY', `VARCHAR', `VARBINARY', `LONGVARCHAR',
     `LONGVARBINARY', `TIMESTAMP', `DATE', `TIME', `GEOMETRY', `ENUM',
     `SET', `SQLNULL'.

     MySQL Connector/C++ does not support the following JDBC standard
     data types: `ARRAY', `BLOB', `CLOB', `DISTINCT', `FLOAT', `OTHER',
     `REF', `STRUCT'.

   * `DatabaseMetaData::supportsBatchUpdates()' returns `true' because
     MySQL supports batch updates in general. However, the MySQL
     Connector/C++ API provides no API calls for batch updates.

   * Two non-JDBC methods let you fetch and set unsigned integers:
     `getUInt64()' and `getUInt()'. These are available for ResultSet
     and Prepared_Statement:

        * `ResultSet::getUInt64()'

        * `ResultSet::getUInt()'

        * `Prepared_Statement::setUInt64()'

        * `Prepared_Statement::setUInt()'

     The corresponding `getLong()' and `setLong()' methods have been
     removed.

   * The `DatabaseMetaData::getColumns()' method has 23 columns in its
     result set, rather than the 22 columns defined by JDBC. The first
     22 columns are as described in the JDBC documentation, but column
     23 is new:

     23. `IS_AUTOINCREMENT': A string which is `YES' if the column is
     an auto-increment column, `NO' otherwise.

   * MySQL Connector/C++ may return different metadata for the same
     column, depending on the method you call.

     Suppose that you have a column that accepts a character set and a
     collation in its specification and you specify a binary collation,
     such as:

          VARCHAR(20) CHARACTER SET utf8 COLLATE utf8_bin

     The server sets the `BINARY' flag in the result set metadata of
     this column. The `ResultSetMetadata::getColumnTypeName()' method
     uses the metadata and will report, due to the `BINARY' flag, that
     the column type name is `BINARY'. This is illustrated here:

          mysql> CREATE TABLE varbin (a VARCHAR(20) CHARACTER SET utf8 COLLATE utf8_bin);
          Query OK, 0 rows affected (0.00 sec)

          mysql> select * from varbin;
          Field   1:  `a`
          Catalog:    `def`
          Database:   `test`
          Table:      `varbin`
          Org_table:  `varbin`
          Type:       VAR_STRING
          Collation:  latin1_swedish_ci (8)
          Length:     20
          Max_length: 0
          Decimals:   0
          Flags:      BINARY

          0 rows in set (0.00 sec)

          mysql> SELECT * FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME='varbin'\G
          *************************** 1. row ***************************
                     TABLE_CATALOG: NULL
                      TABLE_SCHEMA: test
                        TABLE_NAME: varbin
                       COLUMN_NAME: a
                  ORDINAL_POSITION: 1
                    COLUMN_DEFAULT: NULL
                       IS_NULLABLE: YES
                         DATA_TYPE: varchar
          CHARACTER_MAXIMUM_LENGTH: 20
            CHARACTER_OCTET_LENGTH: 60
                 NUMERIC_PRECISION: NULL
                     NUMERIC_SCALE: NULL
                CHARACTER_SET_NAME: utf8
                    COLLATION_NAME: utf8_bin
                       COLUMN_TYPE: varchar(20)
                        COLUMN_KEY:
                             EXTRA:
                        PRIVILEGES: select,insert,update,references
                    COLUMN_COMMENT:
          1 row in set (0.01 sec)

     However, `INFORMATION_SCHEMA' gives no hint in its `COLUMNS' table
     that metadata will contain the `BINARY' flag.
     `DatabaseMetaData::getColumns()' uses `INFORMATION_SCHEMA' and
     will report the type name `VARCHAR' for the same column. It also
     returns a different type code.

   * When inserting or updating `BLOB' or `TEXT' columns, MySQL
     Connector/C++ developers are advised not to use `setString()'.
     Instead, use the dedicated `setBlob()' API function.

     The use of `setString()' can cause a *Note Packet too large:
     packet-too-large. error message. The error occurs if the length of
     the string passed to the connector using `setString()' exceeds
     `max_allowed_packet' (minus a few bytes reserved in the protocol
     for control purposes). This situation is not handled in MySQL
     Connector/C++, because it could lead to security issues, such as
     extremely large memory allocation requests due to malevolently
     long strings.

     If `setBlob()' is used, this problem does not arise because
     `setBlob()' takes a streaming approach based on `std::istream'.
     When sending the data from the stream to MySQL Server, MySQL
     Connector/C++ splits the stream into chunks appropriate for MySQL
     Server using the current `max_allowed_packet' setting.

     *Caution*:

     When using `setString()', it is not possible to set
     `max_allowed_packet' to a value large enough for the string prior
     to passing it to MySQL Connector/C++. That configuration option
     cannot be changed within a session.

     This difference from the JDBC specification ensures that MySQL
     Connector/C++ is not vulnerable to memory flooding attacks.

   * In general, MySQL Connector/C++ works with MySQL 5.0, but it is not
     completely supported. Some methods may not be available when
     connecting to MySQL 5.0. This is because the Information Schema is
     used to obtain the requested information. There are no plans to
     improve the support for 5.0 because the current GA version of
     MySQL Server is 5.6. MySQL Connector/C++ is primarily targeted at
     the MySQL Server GA version that is available on its release.

     The following methods throw a `sql::MethodNotImplemented'
     exception when you connect to a MySQL server earlier than 5.1:

        * `DatabaseMetadata::getCrossReference()'

        * `DatabaseMetadata::getExportedKeys()'

   * MySQL Connector/C++ includes a `Connection::getClientOption()'
     method that is not included in the JDBC API specification. The
     prototype is:

          void getClientOption(const std::string & optionName, void * optionValue)

     The method can be used to check the value of connection properties
     set when establishing a database connection. The values are
     returned through the `optionValue' argument passed to the method
     with the type `void *'.

     Currently, `getClientOption()' supports fetching the `optionValue'
     of the following options:

        * `metadataUseInfoSchema'

        * `defaultStatementResultType'

        * `defaultPreparedStatementResultType'

     The `metadataUseInfoSchema' connection option controls whether to
     use the `Information_Schemata' for returning the metadata of
     `SHOW' statements:

        * For `metadataUseInfoSchema', interpret the `optionValue'
          argument as a boolean upon return.

        * For `defaultStatementResultType' and
          `defaultPreparedStatementResultType', interpret the
          `optionValue' argument as an integer upon return.

     The connection property can be set either when establishing the
     connection through the connection property map, or using `void
     Connection::setClientOption(const std::string & optionName, const
     void * optionValue)' where `optionName' is assigned the value
     `metadataUseInfoSchema'.

     Some examples:

          bool isInfoSchemaUsed;
          conn->getClientOption("metadataUseInfoSchema", (void *) &isInfoSchemaUsed);

          int defaultStmtResType;
          int defaultPStmtResType;
          conn->getClientOption("defaultStatementResultType", (void *) &defaultStmtResType);
          conn->getClientOption("defaultPreparedStatementResultType", (void *) &defaultPStmtResType);

   * MySQL Connector/C++ supports the following methods not found in
     the JDBC API standard:

          std::string MySQL_Connection::getSessionVariable(const std::string & varname)

          void MySQL_Connection::setSessionVariable(const std::string & varname, const std::string & value)

     These methods get and set MySQL session variables. Both are
     members of the `MySQL_Connection' class.

     `getSessionVariable()' is equivalent to executing the following
     and fetching the first return value:

          SHOW SESSION VARIABLES LIKE "<varname>"

     You can use the `%' and `_' SQL pattern characters in <varname>.

     `setSessionVariable()' is equivalent to executing:

          SET SESSION <varname> = <value>

   * Fetching the value of a column can sometimes return different
     values depending on whether the call is made from a Statement or
     Prepared Statement. This is because the protocol used to
     communicate with the server differs depending on whether a
     Statement or Prepared Statement is used.

     To illustrate this, consider the case where a column has been
     defined as type `BIGINT'. The most negative `BIGINT' value is then
     inserted into the column. If a Statement and Prepared Statement
     are created that perform a `GetUInt64()' call, then the results
     will be different in each case. The Statement returns the maximum
     positive value for `BIGINT'. The Prepared Statement returns 0.

     The difference results from the fact that Statements use a text
     protocol, and Prepared Statements use a binary protocol.  With the
     binary protocol in this case, a binary value is returned from the
     server that can be interpreted as an `int64'. In the preceding
     scenario, a very large negative value is fetched with
     `GetUInt64()', which fetches unsigned integers. Because the large
     negative value cannot be sensibly converted to an unsigned value,
     0 is returned.

     In the case of the Statement, which uses the text protocol, values
     are returned from the server as strings, and then converted as
     required. When a string value is returned from the server in the
     preceding scenario, the large negative value must be converted by
     the runtime library function `strtoul()', which `GetUInt64()'
     calls. The behavior of `strtoul()' is dependent upon the specific
     runtime and host operating system, so the results can be platform
     dependent. In the case, given a large positive value was actually
     returned.

     Although it is very rare, there are some cases where Statements
     and Prepared Statements can return different values unexpectedly,
     but this usually only happens in extreme cases such as the one
     mentioned.

   * The JDBC documentation lists many fields
     (http://docs.oracle.com/javase/7/docs/api/java/sql/DatabaseMetaData.html)
     for the `DatabaseMetaData' class. JDBC also appears to define
     certain values
     (http://docs.oracle.com/javase/7/docs/api/java/sql/DatabaseMetaData.html#attributeNoNulls)
     for those fields. However, MySQL Connector/C++ does not define
     certain values for those fields. Internally enumerations are used
     and the compiler determines the values to assign to a field.

     To compare a value with the field, use code such as the following,
     rather than making assumptions about specific values for the
     attribute:

          // dbmeta is an instance of DatabaseMetaData
          if (myvalue == dbmeta->attributeNoNulls) {
              ...
          }

     Usually MYVALUE will be a column from a result set holding
     metadata information. MySQL Connector/C++ does not guarantee that
     `attributeNoNulls' is 0.  It can be any value.

   * When programming stored procedures, JDBC has available an extra
     class, an extra abstraction layer for callable statements, the
     `CallableStatement' class. As this class is not present in MySQL
     Connector/C++, use the methods from the `Statement' and
     `PreparedStatement' classes to execute a stored procedure using
     *Note `CALL': call.


File: manual.info,  Node: connector-cpp-bugs,  Next: connector-cpp-support,  Prev: connector-cpp-usage-notes,  Up: connector-cpp

22.4.10 MySQL Connector/C++ Known Bugs and Issues
-------------------------------------------------

Please report bugs through the MySQL Bug System. See *Note
bug-reports::.

For release notes detailing the changes in each release of
Connector/C++, see MySQL Connector/C++ Release Notes
(http://dev.mysql.com/doc/relnotes/connector-cpp/en/).

   * When linking against a static library for 1.0.3 on Windows, define
     `CPPDBC_PUBLIC_FUNC' either in the compiler options (preferable)
     or with `/D "CPPCONN_PUBLIC_FUNC="'. You can also explicitly
     define it in your code by placing `#define CPPCONN_PUBLIC_FUNC'
     before the header inclusions.

   * Generally speaking, C++ library binaries are less portable than C
     library binaries. Issues can be caused by name mangling, different
     Standard Template Library (STL) versions, and using different
     compilers and linkers for linking against the libraries than were
     used for building the library itself.

     Even a small change in the compiler version can cause problems. If
     you obtain error messages that you suspect are related to binary
     incompatibilities, build MySQL Connector/C++ from source, using
     the same compiler and linker that you will use to build and link
     your application.

     Due to the variations between Linux distributions, compiler and
     linker versions and STL versions, it is not possible to provide
     binaries for each and every possible configuration.  However, the
     MySQL Connector/C++ binary distributions contain a `README' file
     that describes the environment and settings used to build the
     binary versions of the libraries.

   * To avoid potential crashes, the build configuration of MySQL
     Connector/C++ should match the build configuration of the
     application using it. For example, do not use the release build of
     MySQL Connector/C++ with a debug build of the client application.


File: manual.info,  Node: connector-cpp-support,  Prev: connector-cpp-bugs,  Up: connector-cpp

22.4.11 MySQL Connector/C++ Support
-----------------------------------

For general discussion of the MySQL Connector/C++ please use the C/C++
community forum (http://forums.mysql.com/list.php?167) or join the
MySQL Connector/C++ mailing list (http://lists.mysql.com).

Bugs can be reported at the MySQL bug Web site (http://bugs.mysql.com).

For release notes detailing the changes in each release of MySQL
Connector/C++, see MySQL Connector/C++ Release Notes
(http://dev.mysql.com/doc/relnotes/connector-cpp/en/).

For Licensing questions, and to purchase MySQL Products and Services,
please see http://www.mysql.com/buy-mysql/


File: manual.info,  Node: connector-c,  Next: connector-python,  Prev: connector-cpp,  Up: connectors-apis

22.5 MySQL Connector/C
======================

* Menu:

* connector-c-versions::         MySQL Connector/C Versions
* connector-c-platforms::        MySQL Connector/C Supported Platforms
* connector-c-contents::         MySQL Connector/C Distribution Contents
* connector-c-installation::     Installing MySQL Connector/C
* connector-c-applications::     Building MySQL Connector/C Applications

MySQL Connector/C is a client library that implements the C API for
client/server communication. It is a standalone replacement for the
MySQL client library shipped with MySQL Server distributions. See *Note
c-api-implementations::.

Reasons to use MySQL Connector/C:

   * If you need only the client library, MySQL Connector/C provides
     everything required. There is no need to compile or install the
     MySQL Server package, which is much larger.

   * MySQL Connector/C does not rely on the MySQL Server release cycle.
     Bug fixes and new features can be distributed independently of
     MySQL Server releases.

For documentation of the C API implemented by MySQL Connector/C, see
*Note c-api::.

For release notes detailing the changes in each release of MySQL
Connector/C, see MySQL Connector/C Release Notes
(http://dev.mysql.com/doc/relnotes/connector-c/en/).

The following discussion covers these topics:

   * MySQL Connector/C versions and supported platforms

   * MySQL Connector/C distribution contents

   * Obtaining and installing MySQL Connector/C

   * Building client programs that use MySQL Connector/C


File: manual.info,  Node: connector-c-versions,  Next: connector-c-platforms,  Prev: connector-c,  Up: connector-c

22.5.1 MySQL Connector/C Versions
---------------------------------

These versions of MySQL Connector/C are available:

   * MySQL Connector/C 6.1: Based on the C API parts of current MySQL
     sources and kept up to date with those sources.

   * MySQL Connector/C 6.0: Created originally from a branch of the
     MySQL source tree, but now out of date with respect to C API
     changes in that tree.

Consequently, MySQL Connector/C 6.1 is preferred over 6.0. MySQL
Connector/C 6.1 provides these features not present in 6.0:

   * Support for the pluggable authentication framework that enables
     implementation of authentication methods as plugins.  This
     framework can be used for MySQL native authentication as well as
     external authentication methods. See *Note
     pluggable-authentication::.

   * Client-side support for the SHA-256, PAM, and Windows native
     authentication plugins. See The SHA-256 Authentication Plugin
     (http://dev.mysql.com/doc/refman/5.6/en/sha256-authentication-plugin.html),
     *Note pam-authentication-plugin::, and *Note
     windows-authentication-plugin::.

     The older MySQL Connector/C 6.0 can connect only to accounts that
     use native MySQL passwords. If a client program attempts to
     connect to an account that requires a different authentication
     method, an `Access denied for user' error occurs.

   * Support for connecting to accounts that have expired passwords.
     See Password Expiration and Sandbox Mode
     (http://dev.mysql.com/doc/refman/5.6/en/password-expiration.html).

   * Support for prepared *Note `CALL': call.  statements. This enables
     client programs to handle stored procedures that produce multiple
     result sets and to obtain the final value of `OUT' and `INOUT'
     procedure parameters. See *Note c-api-prepared-call-statements::.

   * Support for connecting over IPv6. See *Note ipv6-support::.

   * Support for binding client programs to a specific IP address at
     connect time. See *Note mysql-options::.

   * Support for specifying connection attributes to pass to the server
     at connect time. See *Note mysql-options::, and `mysql_options4()'
     (http://dev.mysql.com/doc/refman/5.6/en/mysql-options4.html).


File: manual.info,  Node: connector-c-platforms,  Next: connector-c-contents,  Prev: connector-c-versions,  Up: connector-c

22.5.2 MySQL Connector/C Supported Platforms
--------------------------------------------

The following tables indicate the platforms on which MySQL Connector/C
has been tested.

*Supported Platforms for MySQL Connector/C 6.1*

Platform    Versions
Windows     Windows Vista, Server 2008, Server 2012, 7, 8
Linux       Oracle and RHEL 5, 6; SuSE LES 11; CentOS 5, 6; Fedora 15,
            16; OpenSuSE 12.1; Debian 6; Ubuntu 12.04; generic `glibc
            2.5'-based Linux systems
Solaris     10, 11
Mac OS X    10.6, 10.7
FreeBSD     9

*Supported Platforms for MySQL Connector/C 6.0.2*

Platform    Versions
Windows     Windows 2000, XP, Vista, Server 2003, Server 2008
Linux       RHEL 4, 5; SuSE LES 9, 10; generic `glibc 2'-based Linux
            systems
Solaris     8, 9, 10
Mac OS X    10.4, 10.5
FreeBSD     6, 7
HP-UX       11.11, 11.23, 11.31
IBM AIX     5.3


File: manual.info,  Node: connector-c-contents,  Next: connector-c-installation,  Prev: connector-c-platforms,  Up: connector-c

22.5.3 MySQL Connector/C Distribution Contents
----------------------------------------------

MySQL Connector/C 6.1 distributions contain the header, library, and
utility files necessary to build MySQL client applications that
communicate with MySQL Server using the C API.

Distributions are available in binary and source formats. A binary
distribution contains the header, library, and utility components
discussed following, compiled and ready for use in writing client
programs. A source distribution contains the source files required to
produce the same headers, libraries, and utilities included in a binary
distribution, but you compile them yourself.

MySQL Connector/C distributions include these components:

   * A set of `.h' header files that C applications include at compile
     time. These files are located in the `include' directory.

   * Static and dynamic libraries that C applications link to at link
     time. These libraries are located in the `lib' directory. The
     library names depend on the library type and platform for which a
     distribution is built:

        * On Unix (and Unix-like) sytems, the static library is
          `libmysqlclient.a'. The dynamic library is
          `libmysqlclient.so' on most Unix systems and
          `libmysqlclient.dylib' on Mac OS X.

        * On Windows, the static library is `mysqlclient.lib' and the
          dynamic library is `libmysql.dll'. Windows distributions also
          include `libmysql.lib', a static import library needed for
          using the dynamic library.

          Windows distributions also include a set of debug libraries.
          These have the same names as the nondebug libraries, but are
          located in the `lib/debug' library.

   * Utilities. MySQL Connector/C 6.1 includes the following utilities,
     located in the `bin' directory. They are the same as in MySQL
     Server distributions:

        * *Note `mysql_config': mysql-config. displays flags needed to
          compile C applications to use MySQL Connector/C. This utility
          is a shell script and is included only for Unix systems. See
          *Note mysql-config::.

        * *Note `my_print_defaults': my-print-defaults. displays the
          options that are present in option groups within option
          files. See *Note my-print-defaults::.

        * *Note `perror': perror. displays error messages corresponding
          to error codes. See *Note perror::.

MySQL Connector/C 6.0 distributions are similar to 6.1 distributions,
with these exceptions:

   * Debug libraries, *Note `my_print_defaults': my-print-defaults, and
     *Note `perror': perror. are not included.

   * *Note `mysql_config': mysql-config. is an executable program that
     is available on all platforms. However, this version of *Note
     `mysql_config': mysql-config. is more limited than the shell
     script version in the types of information it can display.


File: manual.info,  Node: connector-c-installation,  Next: connector-c-applications,  Prev: connector-c-contents,  Up: connector-c

22.5.4 Installing MySQL Connector/C
-----------------------------------

* Menu:

* connector-c-installation-binary::  Installing MySQL Connector/C from a Binary Distribution
* connector-c-installation-source::  Installing MySQL Connector/C from Source
* connector-c-postinstallation::  Postinstallation Steps
* connector-c-testing::          Testing MySQL Connector/C

MySQL Connector/C Distributions are available in binary and source
formats.  Binary distributions are available in native format for many
platforms, such as RPM packages for Linux, DMG packages for Mac OS X,
and PKG packages for Solaris. Distributions are also available in more
generic formats such as Zip archives or compressed `tar' files.

To obtain a distribution, visit MySQL Connector/C downloads
(http://dev.mysql.com/downloads/connector/c/). For a list of supported
platforms, see *Note connector-c-platforms::.

After installing MySQL Connector/C, you may need to take additional
steps to enable your compiler or linker to find the C API header files
and libraries. See *Note connector-c-postinstallation::.


File: manual.info,  Node: connector-c-installation-binary,  Next: connector-c-installation-source,  Prev: connector-c-installation,  Up: connector-c-installation

22.5.4.1 Installing MySQL Connector/C from a Binary Distribution
................................................................

Installers in native package formats are available for many Unix and
Unix-like systems, and for Windows. Alternatively, you can install
using a distribution in a more generic format such as a Zip archive or
compressed `tar' file.

You may need to have `root' or administrator privileges to perform the
installation operation.

* Installing MySQL Connector/C on Unix Using Compressed `tar' Files *

On Unix and Unix-like systems, a generic MySQL Connector/C binary
distribution is packaged as a compressed `tar' file, denoted here as
`PACKAGE.tar.gz'.  To install a distribution file, unpack it in the
intended installation directory using this command:

     shell> tar zxvf PACKAGE.tar.gz

* Installing MySQL Connector/C on Microsoft Windows *

Windows users can choose between two binary packaging formats:

   * Windows MSI Installer (`.msi' file): To use the MSI Installer,
     launch it and follow the prompts in the screens it presents to
     install MySQL Connector/C in the location of your choosing.

   * Zip archive without installer (`.zip' file): To use a Zip archive,
     unpack it in the intended installation directory using `WinZip' or
     another tool that can read `.zip' files.

* Installing MySQL Connector/C on Mac OS X Using DMG Packages *

A Mac OS X native package installer is provided as a DMG (disk image)
file. To install a DMG package, double-click the image file, then
follow the prompts.

By default, the DMG package installs MySQL Connector/C under
`/usr/local', into a dedicated directory that does not conflict with
the one used by MySQL Server DMG packages.

* Installing MySQL Connector/C on Linux Using RPM Packages *

There are two Linux RPM packages for MySQL Connector/C. Install one or
both, depending on the capabilities you require:

   * The `shared' RPM contains the shared client library. Install this
     RPM if you intend to compile or run C API applications that depend
     on the shared client library.

   * The `devel' RPM contains the header files and the static client
     library. Install this RPM if you intend to compile C API
     applications.

RPM packages for MySQL Connector/C do not include the *Note `perror':
perror. or *Note `my_print_defaults': my-print-defaults. utilities.

A Linux RPM package is provided as a file with an `.rpm' suffix,
denoted here as `PACKAGE.rpm'. To install a given RPM package, use this
command:

     shell> rpm -i PACKAGE.rpm

RPM provides a feature to verify the integrity and authenticity of
packages before installing them. To learn more about this feature, see
*Note verifying-package-integrity::.

* Installing MySQL Connector/C on Solaris Using PKG Packages *

A Solaris PKG package is provided as a file with a `.pkg.gz' suffix,
denoted here as `PACKAGE.pkg.gz'.  To install a PKG package, uncompress
it:

     shell> gunzip PACKAGE.pkg.gz

Uncompressing `PACKAGE.pkg.gz' produces `PACKAGE.pkg'.  Then use
`pkgadd' and follow the onscreen prompts:

     shell> pkgadd -d PACKAGE.pkg

By default, the PKG package installs MySQL Connector/C under the root
path `/opt/mysql', into a dedicated directory that does not conflict
with the one used by MySQL Server PKG packages. You can change only the
installation root path using `pkgadd', which can be used to install
MySQL in a different Solaris zone. If you need to install in a specific
directory, use a binary `tar' file distribution.


File: manual.info,  Node: connector-c-installation-source,  Next: connector-c-postinstallation,  Prev: connector-c-installation-binary,  Up: connector-c-installation

22.5.4.2 Installing MySQL Connector/C from Source
.................................................

A MySQL Connector/C source distribution is packaged as a compressed
`tar' file, Zip archive, or RPM package, denoted here as
`PACKAGE.tar.gz', `PACKAGE.zip', or.  `PACKAGE.src.rpm'.  A source
distribution in `tar' file or Zip archive format can be used on any
supported platform listed in *Note connector-c-platforms::. An RPM
package source distribution is intended for RPM-based systems such as
Linux.

To install a compressed `tar' file, use this command in the intended
installation directory:

     shell> tar zxvf PACKAGE.tar.gz

After unpacking the distribution, build it using the appropriate
instructions for your platform later in this section.

To unpack a Zip archive, use `WinZip' or another tool that can read
`.zip' files.  After unpacking the distribution, build it using the
appropriate instructions for your platform later in this section.

To install an RPM package, use this command to create binary RPM
packages that you can install. If you do not have `rpmbuild', use `rpm'
instead.

     shell> rpmbuild --rebuild --clean PACKAGE.src.rpm

The command should produce binary `shared' and `devel' RPM packages and
indicate where it placed them. You can install these packages using the
instructions in *Note connector-c-installation-binary::.

* Building MySQL Connector/C on Unix from Source *

If the native compiler toolset for the target platform is available
(for example, SunStudio for Solaris), you can use that for compilation.
Alternatively, the GNU toolset can be used on all platforms.

You also need `CMake' 2.6 or newer, which is available from cmake.org
(http://www.cmake.org).

To build and install the source distribution, use the following
procedure:

  1. Change location to the top-level directory of the source
     distribution.

  2. Generate the `Makefile':

          shell> cmake -G "Unix Makefiles"

     Or, for a Debug build:

          shell> cmake -G "Unix Makefiles" -DCMAKE_BUILD_TYPE=Debug

     By default, the installation location for MySQL Connector/C is
     `/usr/local/mysql'. To change this location, use the
     `CMAKE_INSTALL_PREFIX' option to specify a different directory
     when generating the `Makefile'. For example:

          shell> cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX=/opt/local/mysql

     For other `CMake' options that you might find useful, see Other
     MySQL Connector/C Build Options.

  3. Build the project:

          shell> make

  4. As `root', install the MySQL Connector/C headers, libraries, and
     utilities:

          root-shell> make install

* Building MySQL Connector/C on Microsoft Windows from Source *

MySQL Connector/C can be built on several versions of Microsoft Windows,
listed in *Note connector-c-platforms::.

Microsoft Visual Studio 8 or 9 is recommended. The Express Edition of
Visual Studio and other compilers might work, but are untested.

You also need `CMake' 2.6 or newer, which is available from cmake.org
(http://www.cmake.org).

To build and install the source distribution, use the following
procedure:

  1. Set the environment variables for the Visual Studio toolchain.
     Visual Studio includes a batch file to set these for you, and
     installs a shortcut in the `Start' menu to open a command prompt
     with these variables set.

  2. Change location to the top-level directory of the source
     distribution.

  3. Generate the `Makefile' by entering the following command in a
     command-prompt window:

          shell> cmake -G "Visual Studio 9 2008"

     For other `CMake' options that you might find useful, see Other
     MySQL Connector/C Build Options.

     The result of the `cmake' command is a project (solution) file,
     `libmysql.sln', that you can open with Visual Studio.
     Alternatively, build from the command line with either of these
     commands:

          shell> devenv.com libmysql.sln /build Release

          shell> devenv.com libmysql.sln /build RelWithDebInfo

     For other versions of Visual Studio or for an `nmake'-based build,
     use the following command to check which generators can be
     specified with the `-G' option:

          shell> cmake --help

     To compile a Debug build, you must set the `CMake' build type so
     the correct external library versions are used, then compile using
     the `Debug' solution configuration:

          shell> cmake -G "Visual Studio 9 2008" -DCMAKE_BUILD_TYPE=Debug
          shell> devenv.com libmysql.sln /build Debug

     A normal build builds the C API libraries for the `lib' directory.
     A Debug build additionally builds debug libraries for the
     `lib/debug' directory. You must use the debug libraries to compile
     clients built using the debug C runtime.

  4. Use the install operation provided by your development environment
     to install the MySQL Connector/C headers, libraries, and
     utilities. You can also use this `CMake' command:

          shell> cmake --build . --target INSTALL --config RelWithDebInfo

* Other MySQL Connector/C Build Options *

The following tables show other options that can be used when building
MySQL Connector/C from source.

*Build Options for MySQL Connector/C 6.1*

Build Option           Description
-DWITH_SSL=system      Enable dynamic linking to the
                       system OpenSSL library.
-DWITH_ZLIB=system     Enable dynamic linking to the
                       system Zlib library.

*Build Options for MySQL Connector/C 6.0*

Build Option           Description
-DWITH_OPENSSL=1       Enable dynamic linking to the
                       system OpenSSL library.
-DWITH_EXTERNAL_ZLIB=1 Enable dynamic linking to the
                       system Zlib library.


File: manual.info,  Node: connector-c-postinstallation,  Next: connector-c-testing,  Prev: connector-c-installation-source,  Up: connector-c-installation

22.5.4.3 Postinstallation Steps
...............................

MySQL Connector/C binary `.tar.gz' and `.zip' packages unpack into a
directory with a name such as
`mysql-connector-c-6.1.0-linux-rhel5-x86-64bit'.  If you want to work
with a simpler name, rename the directory.  On Unix, an alternative is
to create a symbolic link with a simpler name:

     shell> ln -s mysql-connector-c-6.1.0-linux-rhel5-x86-64bit connector-c

When you build C applications that use MySQL Connector/C, if the
compiler or linker have trouble finding the MySQL Connector/C header
files or libraries, you may need to adjust your development tools or
runtime environment. See *Note c-api-building-clients::, and *Note
c-api-running-clients::.


File: manual.info,  Node: connector-c-testing,  Prev: connector-c-postinstallation,  Up: connector-c-installation

22.5.4.4 Testing MySQL Connector/C
..................................

If you build MySQL Connector/C from source, you can use the
instructions in this section to test it. The details of the test
procedure depend on your MySQL Connector/C version, except that a
running MySQL server instance must be available regardless of version.

To test MySQL Connector/C 6.1:

Use the `mysql_client_test' utility in the `tests' directory. For
information about the MySQL Test Framework, see the manual available at
`http://dev.mysql.com/doc/mysqltest/2.0/en/'.

To test MySQL Connector/C 6.0:

Use the `ctest' command. Before you run the test suite, specify the
following environment variables:

   * `MYSQL_TEST_HOST': The host where the MySQL server is running
     (default `localhost')

   * `MYSQL_TEST_USER': The user name of the MySQL account to use

   * `MYSQL_TEST_PASSWD': The password of the MySQL account to use

   * `MYSQL_TEST_PORT': The TCP/IP port to connect to

   * `MYSQL_TEST_SOCKET': The socket file to connect to

   * `MYSQL_TEST_DB': The default database to use (default `test')

To run the test suite, execute `ctest' from the command line:

     shell> ctest


File: manual.info,  Node: connector-c-applications,  Prev: connector-c-installation,  Up: connector-c

22.5.5 Building MySQL Connector/C Applications
----------------------------------------------

To build C applications that use MySQL Connector/C, the connector must
be installed. If you need to do that first, see *Note
connector-c-installation::.

For instructions on building MySQL Connector/C applications, see *Note
c-api-building-clients::. To enable your compiler to find the header
and library files under the directory where you installed MySQL
Connector/C, specify the appropriate compile-time options, as indicated
in that section.

For binary distributions, the `docs/INFO_BIN' file contains information
about the build environment used to compile MySQL Connector/C. This may
help you select compatible tools for compiling client applications.


File: manual.info,  Node: connector-python,  Next: libmysqld,  Prev: connector-c,  Up: connectors-apis

22.6 MySQL Connector/Python
===========================

* Menu:

* connector-python-coding::      Guidelines for Python Developers
* connector-python-versions::    Connector/Python Versions
* connector-python-installation::  Connector/Python Installation
* connector-python-examples::    Connector/Python Coding Examples
* connector-python-tutorials::   Connector/Python Tutorials
* connector-python-connectargs::  Connector/Python Connection Arguments
* connector-python-other::       Connector/Python Other Topics
* connector-python-reference::   Connector/Python API Reference

MySQL Connector/Python enables Python programs to access MySQL
databases, using an API that is compliant with the Python DB API
version 2.0 (http://www.python.org/dev/peps/pep-0249/). It is written
in pure Python and does not have any dependencies except for the Python
Standard Library (http://docs.python.org/library/).

For release notes detailing the changes in each release of
Connector/Python, see MySQL Connector/Python Release Notes
(http://dev.mysql.com/doc/relnotes/connector-python/en/).

MySQL Connector/Python includes support for:

   * Almost all features provided by MySQL Server up to and including
     MySQL Server version 5.5.

   * Converting parameter values back and forth between Python and
     MySQL data types, for example Python `datetime' and MySQL
     `DATETIME'. You can turn automatic conversion on for convenience,
     or off for optimal performance.

   * All MySQL extensions to standard SQL syntax.

   * Protocol compression, which enables compressing the data stream
     between the client and server.

   * Connections using TCP/IP sockets and on Unix using Unix sockets.

   * Secure TCP/IP connections using SSL.

   * Self-contained driver. Connector/Python does not require the MySQL
     client library or any Python modules outside the standard library.

MySQL Connector/Python 1.1 supports Python from version 2.6 through
2.7, and Python 3.1 and later. MySQL Connector/Python 1.0 supports
Python from version 2.4 through 2.7, and Python 3.1 and later. Note
that Connector/Python does not support the old MySQL Server
authentication methods, which means that MySQL versions prior to 4.1
will not work.


File: manual.info,  Node: connector-python-coding,  Next: connector-python-versions,  Prev: connector-python,  Up: connector-python

22.6.1 Guidelines for Python Developers
---------------------------------------

The following guidelines cover aspects of developing MySQL applications
that might not be immediately obvious to developers coming from a
Python background:

   * For security, do not hardcode the values needed to connect and log
     into the database in your main script. Python has the convention
     of a `config.py' module, where you can keep such values separate
     from the rest of your code.

   * Python scripts often build up and tear down large data structures
     in memory, up to the limits of available RAM.  Because MySQL often
     deals with data sets that are many times larger than available
     memory, techniques that optimize storage space and disk I/O are
     especially important. For example, in MySQL tables, you typically
     use numeric IDs rather than string-based dictionary keys, so that
     the key values are compact and have a predictable length. This is
     especially important for columns that make up the primary key for
     an `InnoDB' table, because those column values are duplicated
     within each secondary index.

   * Any application that accepts input must expect to handle bad data.

     The bad data might be accidental, such as out-of-range values or
     misformatted strings. The application can use server-side checks
     such as unique constraints and NOT NULL constraints, to keep the
     bad data from ever reaching the database. On the client side, use
     techniques such as exception handlers to report any problems and
     take corrective action.

     The bad data might also be deliberate, representing an `SQL
     injection' attack. For example, input values might contain
     quotation marks, semicolons, `%' and `_' wildcard characters and
     other characters significant in SQL statements.  Validate input
     values to make sure they have only the expected characters. Escape
     any special characters that could change the intended behavior
     when substituted into a SQL statement.  Never concatenate a user
     input value into a SQL statement without doing validation and
     escaping first. Even when accepting input generated by some other
     program, expect that the other program could also have been
     compromised and be sending you incorrect or malicious data.

   * Because the result sets from SQL queries can be very large, use
     the appropriate method to retrieve items from the result set as
     you loop through them.  *Note fetchone():
     connector-python-api-mysqlcursor-fetchone.  retrieves a single
     item, when you know the result set contains a single row.  *Note
     fetchall(): connector-python-api-mysqlcursor-fetchall.  retrieves
     all the items, when you know the result set contains a limited
     number of rows that can fit comfortably into memory.  *Note
     fetchmany(): connector-python-api-mysqlcursor-fetchmany.  is the
     general-purpose method when you cannot predict the size of the
     result set: you keep calling it and looping through the returned
     items, until there are no more results to process.

   * Since Python already has convenient modules such as `pickle' and
     `cPickle' to read and write data structures on disk, data that you
     choose to store in MySQL instead is likely to have special
     characteristics:

        * *Too large to all fit in memory at one time.* You use *Note
          `SELECT': select. statements to query only the precise items
          you need, and *Note aggregate functions: group-by-functions.
          to perform calculations across multiple items. You configure
          the `innodb_buffer_pool_size' option within the MySQL server
          to dedicate a certain amount of RAM for caching query results.

        * *Too complex to be represented by a single data structure.*
          You divide the data between different SQL tables. You can
          recombine data from multiple tables by using a join query.
          You make sure that related data is kept in sync between
          different tables by setting up foreign key relationships.

        * *Updated frequently, perhaps by multiple users
          simultaneously.* The updates might only affect a small
          portion of the data, making it wasteful to write the whole
          structure each time. You use the SQL *Note `INSERT': insert,
          *Note `UPDATE': update, and *Note `DELETE': delete.
          statements to update different items concurrently, writing
          only the changed values to disk. You use *Note `InnoDB':
          innodb-storage-engine. tables and transactions to keep write
          operations from conflicting with each other, and to return
          consistent query results even as the underlying data is being
          updated.

   * Using MySQL best practices for performance can help your
     application to scale without requiring major rewrites and
     architectural changes. See *Note optimization:: for best practices
     for MySQL performance. It offers guidelines and tips for SQL
     tuning, database design, and server configuration.

   * You can avoid reinventing the wheel by learning the MySQL SQL
     statements for common operations: operators to use in queries,
     techniques for bulk loading data, and so on. Some statements and
     clauses are extensions to the basic ones defined by the SQL
     standard. See *Note sql-syntax-data-manipulation::, *Note
     sql-syntax-data-definition::, and *Note select:: for the main
     classes of statements.

   * Issuing SQL statements from Python typically involves declaring
     very long, possibly multi-line string literals.  Because string
     literals within the SQL statements could be enclosed by single
     quotation, double quotation marks, or contain either of those
     characters, for simplicity you can use Python's triple-quoting
     mechanism to enclose the entire statement. For example:

          '''It doesn't matter if this string contains 'single'
          or "double" quotes, as long as there aren't 3 in a
          row.'''

     You can use either of the `'' or `"' characters for triple-quoting
     multi-line string literals.

   * Many of the secrets to a fast, scalable MySQL application involve
     using the right syntax at the very start of your setup procedure,
     in the *Note `CREATE TABLE': create-table.  statements. For
     example, Oracle recommends the `ENGINE=INNODB' clause for most
     tables, and makes `InnoDB' the default storage engine in MySQL 5.5
     and up. Using `InnoDB' tables enables transactional behavior that
     helps scalability of read-write workloads and offers automatic
     crash recovery.  Another recommendation is to declare a numeric
     primary key for each table, which offers the fastest way to look
     up values and can act as a pointer to associated values in other
     tables (a foreign key). Also within the *Note `CREATE TABLE':
     create-table.  statement, using the most compact column data types
     that meet your application requirements helps performance and
     scalability because that enables the database server to move less
     data back and forth between memory and disk.


File: manual.info,  Node: connector-python-versions,  Next: connector-python-installation,  Prev: connector-python-coding,  Up: connector-python

22.6.2 Connector/Python Versions
--------------------------------

The MySQL Connector/Python 1.1 is the current development series.

The MySQL Connector/Python 1.0 series went through a series of beta
releases, leading to the first generally available (GA) version of
1.0.7. Any development releases prior to the GA version (1.0.7) are no
longer supported.

The following table summarizes the available Connector/Python versions:

*Connector/Python Version Reference*

For each Connector/Python version, this table lists the corresponding
MySQL Server versions that it works with, the corresponding Python
versions that it works with, and whether it is prerelease, recommended
(supported), or obsolete. MySQL server and Python versions within
parentheses are known to work with Connector/Python, but are not
officially supported. Bugs might not get fixed for those versions.

Connector/PythonMySQL Server   Python         Support
Version        Versions       Versions       Status for
                                             Connector
1.1            5.7, 5.6, 5.5  3.1 and        Recommended
               (5.1, 5.0,     later, 2.7,    version
               4.1)           2.6            
1.0            5.7, 5.6, 5.5  3.1 and        Recommended
               (5.1, 5.0,     later, 2.7,    version
               4.1)           2.6 (2.5, 2.4) 

*Note*:

MySQL server and Python versions within parentheses are known to work
with Connector/Python, but are not officially supported. Bugs might not
get fixed for those versions.


File: manual.info,  Node: connector-python-installation,  Next: connector-python-examples,  Prev: connector-python-versions,  Up: connector-python

22.6.3 Connector/Python Installation
------------------------------------

* Menu:

* connector-python-installation-binary::  Installing Connector/Python from a Binary Distribution
* connector-python-installation-source-unix::  Installing Connector/Python Source Distribution on Linux, Unix, or Mac OS X
* connector-python-installation-source-windows::  Installing Connector/Python Source Distribution on Microsoft Windows
* connector-python-verification::  Verifying Your Connector/Python Installation

Connector/Python runs on any platform where Python is installed.
Python comes preinstalled on almost any Linux distribution or Unix-like
system such as Mac OS X and FreeBSD. On Microsoft Windows systems, you
can install Python using the installer found on the Python Download
website (http://python.org/download/).

Connector/Python is a pure Python implementation of the MySQL
Client/Server protocol, meaning it does not require any other MySQL
client libraries or other components. It also has no third-party
dependencies. If you need SSL support, verify that your Python
installation has been compiled using the OpenSSL
(http://www.openssl.org/) libraries.

Installation of Connector/Python is similar on every platform and
follows the standard Python Distribution Utilities
(http://docs.python.org/install/index.html#install-index) or Distutils
(http://docs.python.org/distutils/).  Distributions maybe be available
in native format for some platforms, such as RPM packages for Linux.
When available, the installation of these is covered in this manual.

Python terminology regarding distributions:

   * *Source Distribution* is a distribution that contains only source
     files and is generally platform independent.

   * *Built Distribution* can be regarded as a binary package. It
     contains both sources and platform-independent bytecode.


File: manual.info,  Node: connector-python-installation-binary,  Next: connector-python-installation-source-unix,  Prev: connector-python-installation,  Up: connector-python-installation

22.6.3.1 Installing Connector/Python from a Binary Distribution
...............................................................

Installers in native package formats are available for Unix and
Unix-like systems, and for Windows.

You may need `root' or administrator privileges to perform the
installation operation.

* Installing Connector/Python on Microsoft Windows *

*Note*:

Connector/Python requires `python.exe' to be in the system's `PATH'.
While installing the Python distribution on your system, either enable
`Add python.exe to Path' or manually add it yourself. The
Connector/Python MSI will fail to install if it cannot locate
`python.exe'.

Download and install Python for Windows from
`http://python.org/download/'.

Windows users can use the Windows MSI Installer (`.msi' file). To use
the MSI Installer, launch it and follow the prompts in the screens it
presents to install Connector/Python in the location of your choosing.

This MSI is downloadable at
`http://dev.mysql.com/downloads/connector/python/'. Choose the
Connector/Python version appropriate for the Python version that is
installed on your system.

Subsequent executions of the Connector/Python MSI permit you to either
repair or remove the existing Connector/Python installation.

* Installing Connector/Python on Linux Using RPM Packages *

A Linux RPM package is provided as a file with an `.rpm' suffix,
denoted here as `PACKAGE.rpm'. To install a given RPM package, use this
command:

     shell> rpm -i PACKAGE.rpm

RPM provides a feature to verify the integrity and authenticity of
packages before installing them. To learn more about this feature, see
*Note verifying-package-integrity::.

* Installing Connector/Python on Linux Using Debian Packages *

Oracle provides Debian packages for installation on Debian or
Debian-like Linux systems. A Debian package is provided as a file with
an `.deb' suffix, denoted here as `PACKAGE.deb'. To install a given
Debian package, use this command:

     shell> dpkg -i PACKAGE.deb


File: manual.info,  Node: connector-python-installation-source-unix,  Next: connector-python-installation-source-windows,  Prev: connector-python-installation-binary,  Up: connector-python-installation

22.6.3.2 Installing Connector/Python Source Distribution on Linux, Unix, or Mac OS X
....................................................................................

On Unix-like systems such as Linux distributions, Solaris, Mac OS X,
and FreeBSD, you can download Connector/Python as a `tar' archive from
`http://dev.mysql.com/downloads/connector/python/'.

To install Connector/Python from the `.tar.gz' file, download the
latest version and follow these steps:

     shell> gunzip mysql-connector-python-1.0.10.tar.gz
     shell> tar xf mysql-connector-python-1.0.10.tar
     shell> cd mysql-connector-python-1.0.10
     shell> sudo python setup.py install

On Unix-like systems, Connector/Python is installed in the default
location `/PREFIX/lib/pythonX.Y/site-packages/', where PREFIX is the
location where Python was installed and X.Y is the Python version. See
How installation works
(http://docs.python.org/install/index.html#how-installation-works) in
the Python manual.

If you are not sure where Connector/Python was installed, do the
following to determine the location:

     shell> python
     >>> from distutils.sysconfig import get_python_lib

     >>> print get_python_lib()            # Python v2.x
     /Library/Python/2.7/site-packages

     >>> print(get_python_lib())           # Python v3.x
     /Library/Frameworks/Python.framework/Versions/3.1/lib/python3.1/site-packages

*Note*:

The preceding example shows the default installation location on Mac OS
X 10.7.


File: manual.info,  Node: connector-python-installation-source-windows,  Next: connector-python-verification,  Prev: connector-python-installation-source-unix,  Up: connector-python-installation

22.6.3.3 Installing Connector/Python Source Distribution on Microsoft Windows
.............................................................................

On Microsoft Windows systems, you can download Connector/Python as a
Zip archive from `http://dev.mysql.com/downloads/connector/python/'.

Make sure that the Python executable is available in the Windows
`%PATH%' setting. For more information about installation and
configuration of Python on Windows, see the section Using Python on
Windows (http://docs.python.org/using/windows.html) in the Python
documentation.

To install Connector/Python from the `.zip' file, download the latest
version and follow these steps:

  1. To use a Zip archive, unpack it in the intended installation
     directory (for example, `C:\mysql-connector\') using `WinZip' or
     another tool that can read `.zip' files.

  2. Start a console window (or a DOS window) and change location to
     the folder where you unpacked the Connector/Python Zip archive:

          shell> cd C:\mysql-connector\

  3. Inside the Connector/Python folder, perform the installation using
     this command:

          shell> python setup.py install

On Windows, Connector/Python is installed in the default location
`C:\PythonX.Y\Lib\site-packages\' where X.Y is the Python version you
used to install the connector.

If you are not sure where Connector/Python was installed, do the
following to determine the location:

     shell> python
     >>> from distutils.sysconfig import get_python_lib
     >>> print get_python_lib()            # Python v2.x
     >>> print(get_python_lib())           # Python v3.x


File: manual.info,  Node: connector-python-verification,  Prev: connector-python-installation-source-windows,  Up: connector-python-installation

22.6.3.4 Verifying Your Connector/Python Installation
.....................................................

To test that your Connector/Python installation is working and able to
connect to MySQL Server, you can run a very simple program where you
supply the login credentials and host information required for the
connection. See *Note connector-python-example-connecting:: for an
example.


File: manual.info,  Node: connector-python-examples,  Next: connector-python-tutorials,  Prev: connector-python-installation,  Up: connector-python

22.6.4 Connector/Python Coding Examples
---------------------------------------

* Menu:

* connector-python-example-connecting::  Connecting to MySQL Using Connector/Python
* connector-python-example-ddl::  Creating Tables Using Connector/Python
* connector-python-example-cursor-transaction::  Inserting Data Using Connector/Python
* connector-python-example-cursor-select::  Querying Data Using Connector/Python

These coding examples illustrate how to develop Python applications and
scripts which connect to MySQL Server using MySQL Connector/Python.


File: manual.info,  Node: connector-python-example-connecting,  Next: connector-python-example-ddl,  Prev: connector-python-examples,  Up: connector-python-examples

22.6.4.1 Connecting to MySQL Using Connector/Python
...................................................

The `connect()' constructor creates a connection to the MySQL server
and returns a `MySQLConnection' object.

The following example shows how to connect to the MySQL server:

     import mysql.connector

     cnx = mysql.connector.connect(user='scott', password='tiger',
                                   host='127.0.0.1',
                                   database='employees')
     cnx.close()

See *Note connector-python-connectargs:: for all possible connection
arguments.

It is also possible to create connection objects using the *Note
connection.MySQLConnection(): connector-python-api-mysqlconnection.
class. Both methods, using the `connect()' constructor, or the class
directly, are valid and functionally equal, but using `connector()' is
preferred and is used in most examples in this manual.

To handle connection errors, use the `try' statement and catch all
errors using the *Note errors.Error: connector-python-api-errors-error.
exception:

     import mysql.connector
     from mysql.connector import errorcode

     try:
       cnx = mysql.connector.connect(user='scott',
                                     database='testt')
     except mysql.connector.Error as err:
       if err.errno == errorcode.ER_ACCESS_DENIED_ERROR:
         print("Something is wrong with your user name or password")
       elif err.errno == errorcode.ER_BAD_DB_ERROR:
         print("Database does not exists")
       else:
         print(err)
     else:
       cnx.close()

If you have lots of connection arguments, it's best to keep them in a
dictionary and use the `**' operator:

     import mysql.connector

     config = {
       'user': 'scott',
       'password': 'tiger',
       'host': '127.0.0.1',
       'database': 'employees',
       'raise_on_warnings': True,
     }

     cnx = mysql.connector.connect(**config)

     cnx.close()


File: manual.info,  Node: connector-python-example-ddl,  Next: connector-python-example-cursor-transaction,  Prev: connector-python-example-connecting,  Up: connector-python-examples

22.6.4.2 Creating Tables Using Connector/Python
...............................................

All DDL (Data Definition Language) statements are executed using a
handle structure known as a cursor. The following examples show how to
create the tables of the Employee Sample Database
(http://dev.mysql.com/doc/employee/en/index.html). You need them for
the other examples.

In a MySQL server, tables are very long-lived objects, and are often
accessed by multiple applications written in different languages. You
might typically work with tables that are already set up, rather than
creating them within your own application.  Avoid setting up and
dropping tables over and over again, as that is an expensive operation.
The exception is temporary tables, which can be created and dropped
quickly within an application.

     from __future__ import print_function

     import mysql.connector
     from mysql.connector import errorcode

     DB_NAME = 'employees'

     TABLES = {}
     TABLES['employees'] = (
         "CREATE TABLE `employees` ("
         "  `emp_no` int(11) NOT NULL AUTO_INCREMENT,"
         "  `birth_date` date NOT NULL,"
         "  `first_name` varchar(14) NOT NULL,"
         "  `last_name` varchar(16) NOT NULL,"
         "  `gender` enum('M','F') NOT NULL,"
         "  `hire_date` date NOT NULL,"
         "  PRIMARY KEY (`emp_no`)"
         ") ENGINE=InnoDB")

     TABLES['departments'] = (
         "CREATE TABLE `departments` ("
         "  `dept_no` char(4) NOT NULL,"
         "  `dept_name` varchar(40) NOT NULL,"
         "  PRIMARY KEY (`dept_no`), UNIQUE KEY `dept_name` (`dept_name`)"
         ") ENGINE=InnoDB")

     TABLES['salaries'] = (
         "CREATE TABLE `salaries` ("
         "  `emp_no` int(11) NOT NULL,"
         "  `salary` int(11) NOT NULL,"
         "  `from_date` date NOT NULL,"
         "  `to_date` date NOT NULL,"
         "  PRIMARY KEY (`emp_no`,`from_date`), KEY `emp_no` (`emp_no`),"
         "  CONSTRAINT `salaries_ibfk_1` FOREIGN KEY (`emp_no`) "
         "     REFERENCES `employees` (`emp_no`) ON DELETE CASCADE"
         ") ENGINE=InnoDB")

     TABLES['dept_emp'] = (
         "CREATE TABLE `dept_emp` ("
         "  `emp_no` int(11) NOT NULL,"
         "  `dept_no` char(4) NOT NULL,"
         "  `from_date` date NOT NULL,"
         "  `to_date` date NOT NULL,"
         "  PRIMARY KEY (`emp_no`,`dept_no`), KEY `emp_no` (`emp_no`),"
         "  KEY `dept_no` (`dept_no`),"
         "  CONSTRAINT `dept_emp_ibfk_1` FOREIGN KEY (`emp_no`) "
         "     REFERENCES `employees` (`emp_no`) ON DELETE CASCADE,"
         "  CONSTRAINT `dept_emp_ibfk_2` FOREIGN KEY (`dept_no`) "
         "     REFERENCES `departments` (`dept_no`) ON DELETE CASCADE"
         ") ENGINE=InnoDB")

     TABLES['dept_manager'] = (
         "  CREATE TABLE `dept_manager` ("
         "  `dept_no` char(4) NOT NULL,"
         "  `emp_no` int(11) NOT NULL,"
         "  `from_date` date NOT NULL,"
         "  `to_date` date NOT NULL,"
         "  PRIMARY KEY (`emp_no`,`dept_no`),"
         "  KEY `emp_no` (`emp_no`),"
         "  KEY `dept_no` (`dept_no`),"
         "  CONSTRAINT `dept_manager_ibfk_1` FOREIGN KEY (`emp_no`) "
         "     REFERENCES `employees` (`emp_no`) ON DELETE CASCADE,"
         "  CONSTRAINT `dept_manager_ibfk_2` FOREIGN KEY (`dept_no`) "
         "     REFERENCES `departments` (`dept_no`) ON DELETE CASCADE"
         ") ENGINE=InnoDB")

     TABLES['titles'] = (
         "CREATE TABLE `titles` ("
         "  `emp_no` int(11) NOT NULL,"
         "  `title` varchar(50) NOT NULL,"
         "  `from_date` date NOT NULL,"
         "  `to_date` date DEFAULT NULL,"
         "  PRIMARY KEY (`emp_no`,`title`,`from_date`), KEY `emp_no` (`emp_no`),"
         "  CONSTRAINT `titles_ibfk_1` FOREIGN KEY (`emp_no`)"
         "     REFERENCES `employees` (`emp_no`) ON DELETE CASCADE"
         ") ENGINE=InnoDB")

The preceding code shows how we are storing the `CREATE' statements in
a Python dictionary called `TABLES'. We also define the database in a
global variable called `DB_NAME', which enables you to easily use a
different schema.

     cnx = mysql.connector.connect(user='scott')
     cursor = cnx.cursor()

A single MySQL server can manage multiple databases. Typically, you
specify the database to switch to when connecting to the MySQL server.
This example does not connect to the database upon connection, so that
it can make sure the database exists, and create it if not:

     def create_database(cursor):
         try:
             cursor.execute(
                 "CREATE DATABASE {} DEFAULT CHARACTER SET 'utf8'".format(DB_NAME))
         except mysql.connector.Error as err:
             print("Failed creating database: {}".format(err))
             exit(1)

     try:
         cnx.database = DB_NAME
     except mysql.connector.Error as err:
         if err.errno == errorcode.ER_BAD_DB_ERROR:
             create_database(cursor)
             cnx.database = DB_NAME
         else:
             print(err)
             exit(1)

We first try to change to a particular database using the `database'
property of the connection object `cnx'. If there is an error, we
examine the error number to check if the database does not exist. If
so, we call the `create_database' function to create it for us.

On any other error, the application exits and displays the error
message.

After we successfully create or change to the target database, we
create the tables by iterating over the items of the `TABLES'
dictionary:

     for name, ddl in TABLES.iteritems():
         try:
             print("Creating table {}: ".format(name), end='')
             cursor.execute(ddl)
         except mysql.connector.Error as err:
             if err.errno == errorcode.ER_TABLE_EXISTS_ERROR:
                 print("already exists.")
             else:
                 print(err.errmsg)
         else:
             print("OK")

     cursor.close()
     cnx.close()

To handle the error when the table already exists, we notify the user
that it was already there. Other errors are printed, but we continue
creating tables. (The example shows how to handle the `table already
exists' condition for illustration purposes. In a real application, we
would typically avoid the error condition entirely by using the `IF NOT
EXISTS' clause of the *Note `CREATE TABLE': create-table. statement.)

The output would be something like this:

     Creating table employees: already exists.
     Creating table salaries: already exists.
     Creating table titles: OK
     Creating table departments: already exists.
     Creating table dept_manager: already exists.
     Creating table dept_emp: already exists.

To populate the employees tables, use the dump files of the Employee
Sample Database (http://dev.mysql.com/doc/employee/en/index.html). Note
that you only need the data dump files that you will find in an archive
named like `employees_db-dump-files-1.0.5.tar.bz2'. After downloading
the dump files, execute the following commands, adding connection
options to the *Note `mysql': mysql. commands if necessary:

     shell> tar xzf employees_db-dump-files-1.0.5.tar.bz2
     shell> cd employees_db
     shell> mysql employees < load_employees.dump
     shell> mysql employees < load_titles.dump
     shell> mysql employees < load_departments.dump
     shell> mysql employees < load_salaries.dump
     shell> mysql employees < load_dept_emp.dump
     shell> mysql employees < load_dept_manager.dump


File: manual.info,  Node: connector-python-example-cursor-transaction,  Next: connector-python-example-cursor-select,  Prev: connector-python-example-ddl,  Up: connector-python-examples

22.6.4.3 Inserting Data Using Connector/Python
..............................................

Inserting or updating data is also done using the handler structure
known as a cursor. When you use a transactional storage engine such as
`InnoDB' (the default in MySQL 5.5 and later), you must commit the data
after a sequence of *Note `INSERT': insert, *Note `DELETE': delete, and
*Note `UPDATE': update. statements.

This example shows how to insert new data. The second *Note `INSERT':
insert. depends on the value of the newly created primary key of the
first. The example also demonstrates how to use extended formats. The
task is to add a new employee starting to work tomorrow with a salary
set to 50000.

*Note*:

The following example uses tables created in the example *Note
connector-python-example-ddl::. The `AUTO_INCREMENT' column option for
the primary key of the `employees' table is important to ensure
reliable, easily searchable data.

     from __future__ import print_function
     from datetime import date, datetime, timedelta
     import mysql.connector

     cnx = mysql.connector.connect(user='scott', database='employees')
     cursor = cnx.cursor()

     tomorrow = datetime.now().date() + timedelta(days=1)

     add_employee = ("INSERT INTO employees "
                    "(first_name, last_name, hire_date, gender, birth_date) "
                    "VALUES (%s, %s, %s, %s, %s)")
     add_salary = ("INSERT INTO salaries "
                   "(emp_no, salary, from_date, to_date) "
                   "VALUES (%(emp_no)s, %(salary)s, %(from_date)s, %(to_date)s)")

     data_employee = ('Geert', 'Vanderkelen', tomorrow, 'M', date(1977, 6, 14))

     # Insert new employee
     cursor.execute(add_employee, data_employee)
     emp_no = cursor.lastrowid

     # Insert salary information
     data_salary = {
       'emp_no': emp_no,
       'salary': 50000,
       'from_date': tomorrow,
       'to_date': date(9999, 1, 1),
     }
     cursor.execute(add_salary, data_salary)

     # Make sure data is committed to the database
     cnx.commit()

     cursor.close()
     cnx.close()

We first open a connection to the MySQL server and store the *Note
connection object: connector-python-api-mysqlconnection. in the
variable `cnx'. We then create a new cursor, by default a *Note
MySQLCursor: connector-python-api-mysqlcursor.  object, using the
connection's *Note `cursor()':
connector-python-api-mysqlconnection-cursor.  method.

We could calculate tomorrow by calling a database function, but for
clarity we do it in Python using the `datetime' module.

Both `INSERT' statements are stored in the variables called
`add_employee' and `add_salary'. Note that the second `INSERT'
statement uses extended Python format codes.

The information of the new employee is stored in the tuple
`data_employee'. The query to insert the new employee is executed and
we retrieve the newly inserted value for the `emp_no' column (an
`AUTO_INCREMENT' column) using the `lastrowid' property of the cursor
object.

Next, we insert the new salary for the new employee, using the `emp_no'
variable in the dictionary holding the data. This dictionary is passed
to the `execute()' method of the cursor object if an error occurred.

Since by default Connector/Python turns autocommit off, and MySQL 5.5
and later uses transactional `InnoDB' tables by default, it is
necessary to commit your changes using the connection's `commit()'
method. You could also roll back using the `rollback()' method.


File: manual.info,  Node: connector-python-example-cursor-select,  Prev: connector-python-example-cursor-transaction,  Up: connector-python-examples

22.6.4.4 Querying Data Using Connector/Python
.............................................

The following example shows how to query data using a cursor created
using the connection's *Note `cursor()':
connector-python-api-mysqlconnection-cursor.  method. The data returned
is formatted and printed on the console.

The task is to select all employees hired in the year 1999 and print
their names and hire dates to the console.

     import datetime
     import mysql.connector

     cnx = mysql.connector.connect(user='scott', database='employees')
     cursor = cnx.cursor()

     query = ("SELECT first_name, last_name, hire_date FROM employees "
              "WHERE hire_date BETWEEN %s AND %s")

     hire_start = datetime.date(1999, 1, 1)
     hire_end = datetime.date(1999, 12, 31)

     cursor.execute(query, (hire_start, hire_end))

     for (first_name, last_name, hire_date) in cursor:
       print("{}, {} was hired on {:%d %b %Y}".format(
         last_name, first_name, hire_date))

     cursor.close()
     cnx.close()

We first open a connection to the MySQL server and store the *Note
connection object: connector-python-api-mysqlconnection. in the
variable `cnx'. We then create a new cursor, by default a *Note
MySQLCursor: connector-python-api-mysqlcursor.  object, using the
connection's *Note `cursor()':
connector-python-api-mysqlconnection-cursor.  method.

In the preceding example, we store the `SELECT' statement in the
variable `query'. Note that we are using unquoted `%s'-markers where
dates should have been. Connector/Python converts `hire_start' and
`hire_end' from Python types to a data type that MySQL understands and
adds the required quotes. In this case, it replaces the first `%s' with
`'1999-01-01'', and the second with `'1999-12-31''.

We then execute the operation stored in the `query' variable using the
*Note `execute()': connector-python-api-mysqlcursor-execute.  method.
The data used to replace the `%s'-markers in the query is passed as a
tuple: `(hire_start, hire_end)'.

After executing the query, the MySQL server is ready to send the data.
The result set could be zero rows, one row, or 100 million rows.
Depending on the expected volume, you can use different techniques to
process this result set. In this example, we use the `cursor' object as
an iterator. The first column in the row is stored in the variable
`first_name', the second in `last_name', and the third in `hire_date'.

We print the result, formatting the output using Python's built-in
`format()' function. Note that `hire_date' was converted automatically
by Connector/Python to a Python `datetime.date' object. This means that
we can easily format the date in a more human-readable form.

The output should be something like this:

     ..
     Wilharm, LiMin was hired on 16 Dec 1999
     Wielonsky, Lalit was hired on 16 Dec 1999
     Kamble, Dannz was hired on 18 Dec 1999
     DuBourdieux, Zhongwei was hired on 19 Dec 1999
     Fujisawa, Rosita was hired on 20 Dec 1999
     ..


File: manual.info,  Node: connector-python-tutorials,  Next: connector-python-connectargs,  Prev: connector-python-examples,  Up: connector-python

22.6.5 Connector/Python Tutorials
---------------------------------

* Menu:

* connector-python-tutorial-cursorbuffered::  Tutorial: Raise Employee's Salary Using a Buffering Cursor

These tutorials illustrate how to develop Python applications and
scripts that connect to a MySQL database server using MySQL
Connector/Python.


File: manual.info,  Node: connector-python-tutorial-cursorbuffered,  Prev: connector-python-tutorials,  Up: connector-python-tutorials

22.6.5.1 Tutorial: Raise Employee's Salary Using a Buffering Cursor
...................................................................

The following example script gives a long-overdue 15% raise effective
tomorrow to all employees who joined in the year 2000 and are still
with the company.

We are using buffered cursors to iterate through the selected
employees. This way we do not have to fetch the rows in a new
variables, but can instead use the cursor as an iterator.

Note that the script is an example; there are other ways of doing this
simple task.

     from __future__ import print_function

     from decimal import Decimal
     from datetime import datetime, date, timedelta

     import mysql.connector

     # Connect with the MySQL Server
     cnx = mysql.connector.connect(user='scott', database='employees')

     # Get two buffered cursors
     curA = cnx.cursor(buffered=True)
     curB = cnx.cursor(buffered=True)

     # Query to get employees who joined in a period defined by two dates
     query = (
       "SELECT s.emp_no, salary, from_date, to_date FROM employees AS e "
       "LEFT JOIN salaries AS s USING (emp_no) "
       "WHERE to_date = DATE('9999-01-01')"
       "AND e.hire_date BETWEEN DATE(%s) AND DATE(%s)")

     # UPDATE and INSERT statements for the old and new salary
     update_old_salary = (
       "UPDATE salaries SET to_date = %s "
       "WHERE emp_no = %s AND from_date = %s")
     insert_new_salary = (
       "INSERT INTO salaries (emp_no, from_date, to_date, salary) "
       "VALUES (%s, %s, %s, %s)")

     # Select the employees getting a raise
     curA.execute(query, (date(2000, 1, 1), date(2000, 12, 31)))

     # Iterate through the result of curA
     for (emp_no, salary, from_date, to_date) in curA:

       # Update the old and insert the new salary
       new_salary = int(round(salary * Decimal('1.15')))
       curB.execute(update_old_salary, (tomorrow, emp_no, from_date))
       curB.execute(insert_new_salary,
                    (emp_no, tomorrow, date(9999, 1, 1,), new_salary))

       # Commit the changes
       cnx.commit()

     cnx.close()


File: manual.info,  Node: connector-python-connectargs,  Next: connector-python-other,  Prev: connector-python-tutorials,  Up: connector-python

22.6.6 Connector/Python Connection Arguments
--------------------------------------------

A connection with the MySQL server can be established using either the
`mysql.connector.connect()' function or the
`mysql.connector.MySQLConnection()' class:

     cnx = mysql.connector.connect(user='joe', database='test')
     cnx = MySQLConnection(user='joe', database='test')

The following table describes describes the arguments that can be used
to initiate a connection. An asterisk (*) following an argument
indicates a synonymous argument name, available only for compatibility
with other Python MySQL drivers. Oracle recommends not to use these
alternative names.

*Connection Arguments for Connector/Python*

Argument Name          Default     Description
`user' (`username'*)               The user name used to authenticate with
                                   the MySQL server.
`password' (`passwd'*)             The password to authenticate the user
                                   with the MySQL server.
`database' (`db'*)                 The database name to use when
                                   connecting with the MySQL server.
`host'                 127.0.0.1   The host name or IP address of the
                                   MySQL server.
`port'                 3306        The TCP/IP port of the MySQL server.
                                   Must be an integer.
`unix_socket'                      The location of the Unix socket file.
`use_unicode'          True        Whether to use Unicode.
`charset'              utf8        Which MySQL character set to use.
`collation'            utf8_general_ciWhich MySQL collation to use.
`autocommit'           False       Whether to autocommit transactions.
`time_zone'                        Set the `time_zone' session variable at
                                   connection time.
`sql_mode'                         Set the `sql_mode' session variable at
                                   connection time.
`get_warnings'         False       Whether to fetch warnings.
`raise_on_warnings'    False       Whether to raise an exception on
                                   warnings.
`connection_timeout'               Timeout for the TCP and Unix socket
(`connect_timeout'*)               connections.
`client_flags'                     MySQL client flags.
`buffered'             False       Whether cursor objects fetch the
                                   results immediately after executing
                                   queries.
`raw'                  False       Whether MySQL results are returned as
                                   is, rather than converted to Python
                                   types.
`ssl_ca'                           File containing the SSL certificate
                                   authority.
`ssl_cert'                         File containing the SSL certificate
                                   file.
`ssl_key'                          File containing the SSL key.
`ssl_verify_cert'      False       When set to `True', checks the server
                                   certificate against the certificate
                                   file specified by the `ssl_ca' option.
                                   Any mismatch causes a `ValueError'
                                   exception.
`force_ipv6'           False       When set to `True', uses IPv6 when an
                                   address resolves to both IPv4 and IPv6.
                                   By default, IPv4 is used in such cases.
`dsn'                              Not supported (raises
                                   `NotSupportedError' when used).
`pool_name'                        Connection pool name. Added in 1.1.1.
`pool_size'            5           Connection pool size. Added in 1.1.1.

* MySQL Authentication *

Authentication with MySQL uses `username' and `password'.

*Note*:

MySQL Connector/Python does not support the old, less-secure password
protocols of MySQL versions prior to 4.1.

When the `database' parameter is given, the current database is set to
the given value. To change the current database later, execute a `USE'
SQL statement or set the `database' property of the `MySQLConnection'
instance.

By default, Connector/Python tries to connect to a MySQL server running
on the local host using TCP/IP. The `host' argument defaults to IP
address 127.0.0.1 and `port' to 3306. Unix sockets are supported by
setting `unix_socket'. Named pipes on the Windows platform are not
supported.

* Character Encoding *

By default, strings coming from MySQL are returned as Python Unicode
literals. To change this behavior, set `use_unicode' to `False'. You can
change the character setting for the client connection through the
`charset' argument. To change the character set after connecting to
MySQL, set the `charset' property of the `MySQLConnection' instance.
This technique is preferred over using the `SET NAMES' SQL statement
directly. Similar to the `charset' property, you can set the
`collation' for the current MySQL session.

* Transactions *

The `autocommit' value defaults to `False', so transactions are not
automatically committed. Call the `commit()' method of the
`MySQLConnection' instance within your application after doing a set of
related insert, update, and delete operations.  For data consistency
and high throughput for write operations, it is best to leave the
`autocommit' configuration option turned off when using `InnoDB' or
other transactional tables.

* Time Zones *

The time zone can be set per connection using the `time_zone' argument.
This is useful, for example, if the MySQL server is set to UTC and
`TIMESTAMP' values should be returned by MySQL converted to the `PST'
time zone.

* SQL Modes *

MySQL supports so-called SQL Modes. which change the behavior of the
server globally or per connection. For example, to have warnings raised
as errors, set `sql_mode' to `TRADITIONAL'. For more information, see
*Note server-sql-mode::.

* Troubleshooting and Error Handling *

Warnings generated by queries are fetched automatically when
`get_warnings' is set to `True'.  You can also immediately raise an
exception by setting `raise_on_warnings' to `True'.  Consider using the
MySQL *Note sql_mode: server-sql-mode. setting for turning warnings
into errors.

To set a timeout value for connections, use `connection_timeout'.

* Enabling and Disabling Features Using Client Flags *

MySQL uses *Note client flags: mysql-real-connect. to enable or disable
features. Using the `client_flags' argument, you have control of what
is set. To find out what flags are available, use the following:

     from mysql.connector.constants import ClientFlag
     print '\n'.join(ClientFlag.get_full_info())

If `client_flags' is not specified (that is, it is zero), defaults are
used for MySQL v4.1 and later. If you specify an integer greater than
`0', make sure all flags are set properly. A better way to set and
unset flags individually is to use a list. For example, to set
`FOUND_ROWS', but disable the default `LONG_FLAG':

     flags = [ClientFlag.FOUND_ROWS, -ClientFlag.LONG_FLAG]
     mysql.connector.connect(client_flags=flags)

* Buffering for Result Sets *

By default, MySQL Connector/Python does not buffer or pre-fetch
results. This means that after a query is executed, your program is
responsible for fetching the data. This avoids excessive memory use
when queries return large result sets. If you know that the result set
is small enough to handle all at once, you can fetch the results
immediately by setting `buffered' to `True'. It is also possible to set
this per cursor (see *Note
connector-python-api-mysqlconnection-cursor::).

* Type Conversions *

By default, MySQL types in result sets are converted automatically to
Python types. For example, a `DATETIME' column value becomes a
datetime.datetime
(http://docs.python.org/library/datetime.html#datetime.datetime)
object. To disable conversion, set the `raw' parameter to `True'. You
might do this to get better performance or perform different types of
conversion yourself.

* Connecting through SSL *

Using SSL connections is possible when your Python installation
supports SSL (http://docs.python.org/library/ssl.html), that is, when
it is compiled against the OpenSSL libraries. When you provide the
`ssl_ca', `ssl_key' and `ssl_cert' arguments, the connection switches to
SSL, and the `client_flags' option includes the `ClientFlag.SSL' value
automatically. You can use this in combination with the `compressed'
argument set to `True'.

     # Note (Example is valid for Python v2 and v3)
     from __future__ import print_function

     import sys

     #sys.path.insert(0, 'python{0}/'.format(sys.version_info[0]))

     import mysql.connector
     from mysql.connector.constants import ClientFlag

     config = {
         'user': 'ssluser',
         'password': 'asecret',
         'host': '127.0.0.1',
         'client_flags': [ClientFlag.SSL],
         'ssl_ca': '/opt/mysql/ssl/ca-cert.pem',
         'ssl_cert': '/opt/mysql/ssl/client-cert.pem',
         'ssl_key': '/opt/mysql/ssl/client-key.pem',
     }

     cnx = mysql.connector.connect(**config)
     cur = cnx.cursor(buffered=True)
     cur.execute("SHOW STATUS LIKE 'Ssl_cipher'")
     print(cur.fetchone())
     cur.close()
     cnx.close()

* Connection Pooling *

With either the `pool_name' or `pool_size' argument present,
Connector/Python creates the new pool. If the `pool_name' argument is
not given, the `connect()' call automatically generates the name,
composed from whichever of the `host', `port', `user', and `database'
connection arguments are given, in that order. If the `pool_size'
argument is not given, the default size is 5 connections.

Connection pooling is supported as of Connector/Python 1.1.1. See *Note
connector-python-connection-pooling::.

* Compatibitility with Other Connection Interfaces *

`passwd', `db' and `connect_timeout' are valid for compatibility with
other MySQL interfaces and are respectively the same as `password',
`database' and `connection_timeout'. The latter take precedence.  Data
source name syntax or `dsn' is not used; if specified, it raises a
`NotSupportedError' exception.


File: manual.info,  Node: connector-python-other,  Next: connector-python-reference,  Prev: connector-python-connectargs,  Up: connector-python

22.6.7 Connector/Python Other Topics
------------------------------------

* Menu:

* connector-python-connection-pooling::  Connector/Python Connection Pooling
* connector-python-django-backend::  Connector/Python Django Backend

This section describes additional Connection/Python features:

   * Connection pooling: *Note connector-python-connection-pooling::

   * Django backend for MySQL: *Note connector-python-django-backend::


File: manual.info,  Node: connector-python-connection-pooling,  Next: connector-python-django-backend,  Prev: connector-python-other,  Up: connector-python-other

22.6.7.1 Connector/Python Connection Pooling
............................................

MySQL Connector/Python 1.1.1 and up supports simple connection pooling
that has these characteristics:

   * The `mysql.connector.pooling' module implements pooling.

   * A pool opens a number of connections and handles thread safety
     when providing connections to requesters.

   * The size of a connection pool is configurable at pool creation
     time. It cannot be resized thereafter.

   * A connection pool can be named at pool creation time. If no name
     is given, one is generated using the connection parameters.

   * The connection pool name can be retrieved from the connection pool
     or connections obtained from it.

   * It is possible to have multiple connection pools. This enables
     applications to support pools of connections to different MySQL
     servers, for example.

   * For each connection request, the pool provides the next available
     connection. No round-robin or other scheduling algorithm is used.

   * It is possible to reconfigure the connection parameters used by a
     pool. These apply to connections obtained from the pool
     thereafter. Reconfiguring individual connections obtained from the
     pool by calling the connection `config()' method is not supported.

Applications that can benefit from connection-pooling capability
include:

   * Middleware that maintains multiple connections to multiple MySQL
     servers and requires connections to be readily available.

   * Web sites that can have more `permanent' connections open to the
     MySQL server.

A connection pool can be created implicitly or explicitly.

*To create a connection pool implicitly:* Open a connection and specify
one or more pool-related arguments (`pool_name', `pool_size'). For
example:

     dbconfig = {
       "database": "test",
       "user":     "joe"
     }

     cnx = mysql.connector.connect(pool_name = "mypool",
                                   pool_size = 3,
                                   **dbconfig)

With either the `pool_name' or `pool_size' argument present,
Connector/Python creates the new pool. If the `pool_name' argument is
not given, the `connect()' call automatically generates the name,
composed from whichever of the `host', `port', `user', and `database'
connection arguments are given, in that order. If the `pool_size'
argument is not given, the default size is 5 connections.

Subsequent calls to `connect()' that name the same connection pool
return connections from the existing pool.  Any `pool_size' or
connection parameter arguments are ignored, so the following
`connect()' calls are equivalent to the original `connect()' call shown
earlier:

     cnx = mysql.connector.connect(pool_name = "mypool", pool_size = 3)
     cnx = mysql.connector.connect(pool_name = "mypool", **dbconfig)
     cnx = mysql.connector.connect(pool_name = "mypool")

Pooled connections obtained by calling `connect()' with a pool-related
argument have a class of `PooledMySQLConnection' (see *Note
connector-python-api-pooledmysqlconnection::).  `PooledMySQLConnection'
pooled connection objects are similar to `MySQLConnection' unpooled
connection objects, with these differences:

   * To release a pooled connection obtained from a connection pool,
     invoke its `close()' method, just as for any unpooled connection.
     However, for a pooled connection, `close()' does not actually
     close the connection but returns it to the pool and makes it
     available for subsequent connection requests.

   * A pooled connection cannot be reconfigured using its `config()'
     method. Connection changes must be done through the pool object
     itself, as described shortly.

   * A pooled connection has a `pool_name' property that returns the
     pool name.

*To create a connection pool explicitly:* Create a
`MySQLConnectionPool' object (see *Note
connector-python-api-mysqlconnectionpool::):

     dbconfig = {
       "database": "test",
       "user":     "joe"
     }

     cnxpool = mysql.connector.pooling.MySQLConnectionPool(pool_name = "mypool",
                                                           pool_size = 3,
                                                           **dbconfig)

To request a connection from the pool, use its `get_connection()'
method:

     cnx1 = cnxpool.get_connection()
     cnx2 = cnxpool.get_connection()

When you create a connection pool explicitly, it is possible to use the
pool object's `set_config()' method to reconfigure the pool connection
parameters:

     dbconfig = {
       "database": "performance_schema",
       "user":     "admin",
       "password": "secret"
     }

     cnxpool.set_config(**dbconfig)

Connections requested from the pool after the configuration change use
the new parameters. Connections obtained before the change remain
unaffected, but when they are closed (returned to the pool) are
reopened with the new parameters before being returned by the pool for
subsequent connection requests.


File: manual.info,  Node: connector-python-django-backend,  Prev: connector-python-connection-pooling,  Up: connector-python-other

22.6.7.2 Connector/Python Django Backend
........................................

Connector/Python 1.1.1 and up includes a `mysql.connector.django'
module that provides a Django backend for MySQL. This backend supports
new features found in MySQL 5.6 such as fractional seconds support for
temporal data types.

* Django Configuration *

Django uses a configuration file named `settings.py' that contains a
variable called `DATABASES' (see
`https://docs.djangoproject.com/en/1.5/ref/settings/#std:setting-DATABASES').
To configure Django to use Connector/Python as the MySQL backend, the
example found in the Django manual can be used as a basis:

     DATABASES = {
         'default': {
             'NAME': 'user_data',
             'ENGINE': 'mysql.connector.django',
             'USER': 'mysql_user',
             'PASSWORD': 'priv4te',
             'OPTIONS': {
               'autocommit': True,
             },
         }
     }

It is possible to add more connection arguments using `OPTIONS'.

* Support for MySQL Features *

Django can launch the MySQL client application *Note `mysql': mysql.
When the Connector/Python backend does this, it arranges for the
`sql_mode' system variable to be set to `TRADITIONAL' at startup.

Some MySQL features are enabled depending on the server version.  For
example, support for fractional seconds precision is enabled when
connecting to a server from MySQL 5.6.4 or higher. Django's
`DateTimeField' is stored in a MySQL column defined as `DATETIME(6)',
and `TimeField' is stored as `TIME(6)'. For more information about
fractional seconds support, see *Note fractional-seconds::.

* Django Unit Testing *

Django comes with an extensive set of unit tests. To run these, use the
`run_django_tests.py' script located in the Connector/Python
distribution `support/django' directory. For example, to run the basic
tests using Django 1.5, run the following commands:

     shell> cd support/django
     shell> python run_django_tests.py --django 1.5 --tests basic

The script can be run using Python 2 or Python 3. It downloads Django,
unpacks it and starts the tests. To avoid the download and use an
already-fetched version, use the `--offline' option.

To see the script requirements, run it with the `--help' option, or
examine the script itself. Here is an overview:

   * Two MySQL servers, configured as a master/slave pair

   * A database named `django_tests' on each server

To alter the settings of the MySQL servers, modify the file
`test_mysqlconnector_settings.py', also located in the `support/django'
directory.


File: manual.info,  Node: connector-python-reference,  Prev: connector-python-other,  Up: connector-python

22.6.8 Connector/Python API Reference
-------------------------------------

* Menu:

* connector-python-api-mysql-connector::  Module `mysql.connector'
* connector-python-api-mysqlconnection::  Class `connection.MySQLConnection'
* connector-python-api-mysqlconnectionpool::  Class `pooling.MySQLConnectionPool'
* connector-python-api-pooledmysqlconnection::  Class `pooling.PooledMySQLConnection'
* connector-python-api-mysqlcursor::  Class `cursor.MySQLCursor'
* connector-python-api-mysqlcursorbuffered::  Class `cursor.MySQLCursorBuffered'
* connector-python-api-mysqlcursorprepared::  Class `cursor.MySQLCursorPrepared'
* connector-python-api-clientflag::  Class `constants.ClientFlag'
* connector-python-api-fieldtype::  Class `constants.FieldType'
* connector-python-api-sqlmode::  Class `constants.SQLMode'
* connector-python-api-characterset::  Class `constants.CharacterSet'
* connector-python-api-refreshoption::  Class `constants.RefreshOption'
* connector-python-api-errors::  Errors and Exceptions

This section contains the public API reference for Connector/Python.
Examples should be considered working for Python 2.7, and Python 3.1
and greater. They might also work for older versions (such as Python
2.4) unless they use features introduced in newer Python versions.  For
example, exception handling using the `as' keyword was introduced in
Python 2.6 and will not work in Python 2.4.

The following overview shows the `mysql.connector' package with its
modules. Currently, only the most useful modules, classes, and methods
for end users are documented.

     mysql.connector
       errorcode
       errors
       connection
       constants
       conversion
       cursor
       dbapi
       locales
         eng
           client_error
       protocol
       utils


File: manual.info,  Node: connector-python-api-mysql-connector,  Next: connector-python-api-mysqlconnection,  Prev: connector-python-reference,  Up: connector-python-reference

22.6.8.1 Module `mysql.connector'
.................................

* Menu:

* connector-python-api-mysql-connector-connect::  Method `mysql.connector.connect()'
* connector-python-api-mysql-connector-apilevel::  Property `mysql.connector.apilevel'
* connector-python-api-mysql-connector-paramstyle::  Property `mysql.connector.paramstyle'
* connector-python-api-mysql-connector-threadsafety::  Property `mysql.connector.threadsafety'
* connector-python-api-mysql-connector-version::  Property `mysql.connector.__version__'
* connector-python-api-mysql-connector-version-info::  Property `mysql.connector.__version_info__'

The `mysql.connector' module provides top-level methods and properties.


File: manual.info,  Node: connector-python-api-mysql-connector-connect,  Next: connector-python-api-mysql-connector-apilevel,  Prev: connector-python-api-mysql-connector,  Up: connector-python-api-mysql-connector

22.6.8.2 Method `mysql.connector.connect()'
...........................................

This method sets up a connection, establishing a session with the MySQL
server. If no arguments are given, it uses the already configured or
default values. For a complete list of possible arguments, see *Note
connector-python-connectargs::.

A connection with the MySQL server can be established using either the
`mysql.connector.connect()' method or the
`mysql.connector.MySQLConnection()' class:

     cnx = mysql.connector.connect(user='joe', database='test')
     cnx = MySQLConnection(user='joe', database='test')

For descriptions of connection methods and properties, see *Note
connector-python-api-mysqlconnection::.


File: manual.info,  Node: connector-python-api-mysql-connector-apilevel,  Next: connector-python-api-mysql-connector-paramstyle,  Prev: connector-python-api-mysql-connector-connect,  Up: connector-python-api-mysql-connector

22.6.8.3 Property `mysql.connector.apilevel'
............................................

This property is a string that indicates the supported DB API level.


     >>> mysql.connector.apilevel
     '2.0'


File: manual.info,  Node: connector-python-api-mysql-connector-paramstyle,  Next: connector-python-api-mysql-connector-threadsafety,  Prev: connector-python-api-mysql-connector-apilevel,  Up: connector-python-api-mysql-connector

22.6.8.4 Property `mysql.connector.paramstyle'
..............................................

This property is a string that indicates the Connector/Python default
parameter style.


     >>> mysql.connector.paramstyle
     'pyformat'


File: manual.info,  Node: connector-python-api-mysql-connector-threadsafety,  Next: connector-python-api-mysql-connector-version,  Prev: connector-python-api-mysql-connector-paramstyle,  Up: connector-python-api-mysql-connector

22.6.8.5 Property `mysql.connector.threadsafety'
................................................

This property is an integer that indicates the supported level of
thread safety provided by Connector/Python.


     >>> mysql.connector.threadsafety
     1


File: manual.info,  Node: connector-python-api-mysql-connector-version,  Next: connector-python-api-mysql-connector-version-info,  Prev: connector-python-api-mysql-connector-threadsafety,  Up: connector-python-api-mysql-connector

22.6.8.6 Property `mysql.connector.__version__'
...............................................

This property indicates the Connector/Python version as a string. It is
available as of Connector/Python 1.1.0.


     >>> mysql.connector.__version__
     '1.1.0'


File: manual.info,  Node: connector-python-api-mysql-connector-version-info,  Prev: connector-python-api-mysql-connector-version,  Up: connector-python-api-mysql-connector

22.6.8.7 Property `mysql.connector.__version_info__'
....................................................

This property indicates the Connector/Python version as an array of
version components. It is available as of Connector/Python 1.1.0.


     >>> mysql.connector.__version_info__
     (1, 1, 0, 'a', 0)


File: manual.info,  Node: connector-python-api-mysqlconnection,  Next: connector-python-api-mysqlconnectionpool,  Prev: connector-python-api-mysql-connector,  Up: connector-python-reference

22.6.8.8 Class `connection.MySQLConnection'
...........................................

* Menu:

* connector-python-api-mysqlconnection-constructor::  Constructor `connection.MySQLConnection(**kwargs)'
* connector-python-api-mysqlconnection-close::  Method `MySQLConnection.close()'
* connector-python-api-mysqlconnection-commit::  Method `MySQLConnection.commit()'
* connector-python-api-mysqlconnection-config::  Method `MySQLConnection.config(**kwargs)'
* connector-python-api-mysqlconnection-connect::  Method `MySQLConnection.connect()'
* connector-python-api-mysqlconnection-cursor::  Method `MySQLConnection.cursor(buffered=None, raw=None, cursor_class=None)'
* connector-python-api-mysqlconnection-cmd-change-user::  Method `MySQLConnection.cmd_change_user(username='', password='', database='', charset=33)'
* connector-python-api-mysqlconnection-cmd-debug::  Method `MySQLConnection.cmd_debug()'
* connector-python-api-mysqlconnection-cmd-init-db::  Method `MySQLConnection.cmd_init_db(database)'
* connector-python-api-mysqlconnection-cmd-ping::  Method `MySQLConnection.cmd_ping()'
* connector-python-api-mysqlconnection-cmd-process-info::  Method `MySQLConnection.cmd_process_info()'
* connector-python-api-mysqlconnection-cmd-process-kill::  Method `MySQLConnection.cmd_process_kill(mysql_pid)'
* connector-python-api-mysqlconnection-cmd-query::  Method `MySQLConnection.cmd_query(statement)'
* connector-python-api-mysqlconnection-cmd-query-iter::  Method `MySQLConnection.cmd_query_iter(statement)'
* connector-python-api-mysqlconnection-cmd-quit::  Method `MySQLConnection.cmd_quit()'
* connector-python-api-mysqlconnection-cmd-refresh::  Method `MySQLConnection.cmd_refresh(options)'
* connector-python-api-mysqlconnection-cmd-shutdown::  Method `MySQLConnection.cmd_shutdown()'
* connector-python-api-mysqlconnection-cmd-statistics::  Method `MySQLConnection.cmd_statistics()'
* connector-python-api-mysqlconnection-disconnect::  Method `MySQLConnection.disconnect()'
* connector-python-api-mysqlconnection-get-row::  Method `MySQLConnection.get_row()'
* connector-python-api-mysqlconnection-get-rows::  Method `MySQLConnection.get_rows(count=None)'
* connector-python-api-mysqlconnection-get-server-info::  Method `MySQLConnection.get_server_info()'
* connector-python-api-mysqlconnection-get-server-version::  Method `MySQLConnection.get_server_version()'
* connector-python-api-mysqlconnection-is-connected::  Method `MySQLConnection.is_connected()'
* connector-python-api-mysqlconnection-isset-client-flag::  Method `MySQLConnection.isset_client_flag(flag)'
* connector-python-api-mysqlconnection-ping::  Method `MySQLConnection.ping(attempts=1, delay=0)'
* connector-python-api-mysqlconnection-reconnect::  Method `MySQLConnection.reconnect(attempts=1, delay=0)'
* connector-python-api-mysqlconnection-rollback::  Method `MySQLConnection.rollback()'
* connector-python-api-mysqlconnection-set-charset-collation::  Method `MySQLConnection.set_charset_collation(charset=None, collation=None)'
* connector-python-api-mysqlconnection-set-client-flags::  Method `MySQLConnection.set_client_flags(flags)'
* connector-python-api-mysqlconnection-start-transaction::  Method `MySQLConnection.start_transaction()'
* connector-python-api-mysqlconnection-autocommit::  Property `MySQLConnection.autocommit'
* connector-python-api-mysqlconnection-charset-name::  Property `MySQLConnection.charset_name'
* connector-python-api-mysqlconnection-collation-name::  Property `MySQLConnection.collation_name'
* connector-python-api-mysqlconnection-connection-id::  Property `MySQLConnection.connection_id'
* connector-python-api-mysqlconnection-database::  Property `MySQLConnection.database'
* connector-python-api-mysqlconnection-get-warnings::  Property `MySQLConnection.get_warnings'
* connector-python-api-mysqlconnection-in-transaction::  Property `MySQLConnection.in_transaction'
* connector-python-api-mysqlconnection-raise-on-warnings::  Property `MySQLConnection.raise_on_warnings'
* connector-python-api-mysqlconnection-server-host::  Property `MySQLConnection.server_host'
* connector-python-api-mysqlconnection-server-port::  Property `MySQLConnection.server_port'
* connector-python-api-mysqlconnection-sql-mode::  Property `MySQLConnection.sql_mode'
* connector-python-api-mysqlconnection-time-zone::  Property `MySQLConnection.time_zone'
* connector-python-api-mysqlconnection-unix-socket::  Property `MySQLConnection.unix_socket'
* connector-python-api-mysqlconnection-user::  Property `MySQLConnection.user'

The `MySQLConnection' class is used to open and manage a connection to
a MySQL server. It also used to send commands and SQL statements and
read the results.


File: manual.info,  Node: connector-python-api-mysqlconnection-constructor,  Next: connector-python-api-mysqlconnection-close,  Prev: connector-python-api-mysqlconnection,  Up: connector-python-api-mysqlconnection

22.6.8.9 Constructor `connection.MySQLConnection(**kwargs)'
...........................................................

The `MySQLConnection' constructor initializes the attributes and when
at least one argument is passed, it tries to connect to the MySQL
server.

For a complete list or arguments, see *Note
connector-python-connectargs::.


File: manual.info,  Node: connector-python-api-mysqlconnection-close,  Next: connector-python-api-mysqlconnection-commit,  Prev: connector-python-api-mysqlconnection-constructor,  Up: connector-python-api-mysqlconnection

22.6.8.10 Method `MySQLConnection.close()'
..........................................

Syntax:

     cnx.close()

`close()' is a synonym for `disconnect()'. See *Note
connector-python-api-mysqlconnection-disconnect::.

For a connection obtained from a connection pool, `close()' does not
actually close it but returns it to the pool and makes it available for
subsequent connection requests. See *Note
connector-python-connection-pooling::.


File: manual.info,  Node: connector-python-api-mysqlconnection-commit,  Next: connector-python-api-mysqlconnection-config,  Prev: connector-python-api-mysqlconnection-close,  Up: connector-python-api-mysqlconnection

22.6.8.11 Method `MySQLConnection.commit()'
...........................................

This method sends a `COMMIT' statement to the MySQL server, committing
the current transaction. Since by default Connector/Python does not
autocommit, it is important to call this method after every transaction
that modifies data for tables that use transactional storage engines.


     >>> cursor.execute("INSERT INTO employees (first_name) VALUES (%s)", ('Jane'))
     >>> cnx.commit()

To roll back instead and discard modifications, see the *Note
rollback(): connector-python-api-mysqlconnection-rollback.  method.


File: manual.info,  Node: connector-python-api-mysqlconnection-config,  Next: connector-python-api-mysqlconnection-connect,  Prev: connector-python-api-mysqlconnection-commit,  Up: connector-python-api-mysqlconnection

22.6.8.12 Method `MySQLConnection.config(**kwargs)'
...................................................

Syntax:

     cnx.config(**kwargs)

Configures a `MySQLConnection' instance after it has been instantiated.
For a complete list of possible arguments, see *Note
connector-python-connectargs::.

Arguments:

   * `kwargs': Connection arguments.

You could use the `config()' method to change (for example) the user
name, then call `reconnect()'.

Example:

     cnx = mysql.connector.connect(user='joe', database='test')
     # Connected as 'joe'
     cnx.config(user='jane')
     cnx.reconnect()
     # Now connected as 'jane'

For a connection obtained from a connection pool, `config()' raises an
exception. See *Note connector-python-connection-pooling::.


File: manual.info,  Node: connector-python-api-mysqlconnection-connect,  Next: connector-python-api-mysqlconnection-cursor,  Prev: connector-python-api-mysqlconnection-config,  Up: connector-python-api-mysqlconnection

22.6.8.13 Method `MySQLConnection.connect()'
............................................

Syntax:

     MySQLConnection.connect(**kwargs)

This method sets up a connection, establishing a session with the MySQL
server. If no arguments are given, it uses the already configured or
default values. For a complete list of possible arguments, see *Note
connector-python-connectargs::.

Arguments:

   * `kwargs': Connection arguments.

Example:

     cnx = MySQLConnection(user='joe', database='test')

For a connection obtained from a conection pool, the connection object
class is `PooledMySQLConnection'. A pooled connection differs from an
unpooled connection as described in *Note
connector-python-connection-pooling::.


File: manual.info,  Node: connector-python-api-mysqlconnection-cursor,  Next: connector-python-api-mysqlconnection-cmd-change-user,  Prev: connector-python-api-mysqlconnection-connect,  Up: connector-python-api-mysqlconnection

22.6.8.14 Method `MySQLConnection.cursor(buffered=None, raw=None, cursor_class=None)'
.....................................................................................

This method returns a `MySQLCursor()' object, or a subclass of it
depending on the passed arguments.

When `buffered' is `True', the cursor fetches all rows after the
operation is executed. This is useful when queries return small result
sets. Setting `raw' skips the conversion from MySQL data types to
Python types when fetching rows. Raw is usually used when you want to
get better performance or you want to do the conversion yourself.

The `cursor_class' argument can be used to pass a class to use for
instantiating a new cursor. It must be a subclass of
`cursor.CursorBase'.

The returned object depends on the combination of the `buffered' and
`raw' arguments.

   * If not buffered and not raw: `cursor.MySQLCursor'

   * If buffered and not raw: `cursor.MySQLCursorBuffered'

   * If buffered and raw: `cursor.MySQLCursorBufferedRaw'

   * If not buffered and raw: `cursor.MySQLCursorRaw'

Returns a `CursorBase' instance.


File: manual.info,  Node: connector-python-api-mysqlconnection-cmd-change-user,  Next: connector-python-api-mysqlconnection-cmd-debug,  Prev: connector-python-api-mysqlconnection-cursor,  Up: connector-python-api-mysqlconnection

22.6.8.15 Method `MySQLConnection.cmd_change_user(username='', password='', database='', charset=33)'
.....................................................................................................

Changes the user using `username' and `password'. It also causes the
specified `database' to become the default (current) database. It is
also possible to change the character set using the `charset' argument.

Returns a dictionary containing the OK packet information.


File: manual.info,  Node: connector-python-api-mysqlconnection-cmd-debug,  Next: connector-python-api-mysqlconnection-cmd-init-db,  Prev: connector-python-api-mysqlconnection-cmd-change-user,  Up: connector-python-api-mysqlconnection

22.6.8.16 Method `MySQLConnection.cmd_debug()'
..............................................

Instructs the server to write debugging information to the error log.
The connected user must have the `SUPER' privilege.

Returns a dictionary containing the OK packet information.


File: manual.info,  Node: connector-python-api-mysqlconnection-cmd-init-db,  Next: connector-python-api-mysqlconnection-cmd-ping,  Prev: connector-python-api-mysqlconnection-cmd-debug,  Up: connector-python-api-mysqlconnection

22.6.8.17 Method `MySQLConnection.cmd_init_db(database)'
........................................................

This method makes specified database the default (current) database. In
subsequent queries, this database is the default for table references
that include no explicit database qualifier.

Returns a dictionary containing the OK packet information.


File: manual.info,  Node: connector-python-api-mysqlconnection-cmd-ping,  Next: connector-python-api-mysqlconnection-cmd-process-info,  Prev: connector-python-api-mysqlconnection-cmd-init-db,  Up: connector-python-api-mysqlconnection

22.6.8.18 Method `MySQLConnection.cmd_ping()'
.............................................

Checks whether the connection to the server is working.

This method is not to be used directly. Use *Note ping():
connector-python-api-mysqlconnection-ping.  or *Note is_connected():
connector-python-api-mysqlconnection-is-connected.  instead.

Returns a dictionary containing the OK packet information.


File: manual.info,  Node: connector-python-api-mysqlconnection-cmd-process-info,  Next: connector-python-api-mysqlconnection-cmd-process-kill,  Prev: connector-python-api-mysqlconnection-cmd-ping,  Up: connector-python-api-mysqlconnection

22.6.8.19 Method `MySQLConnection.cmd_process_info()'
.....................................................

This method raises the NotSupportedError exception. Instead, use the
`SHOW PROCESSLIST' statement or query the tables found in the database
`INFORMATION_SCHEMA'.


File: manual.info,  Node: connector-python-api-mysqlconnection-cmd-process-kill,  Next: connector-python-api-mysqlconnection-cmd-query,  Prev: connector-python-api-mysqlconnection-cmd-process-info,  Up: connector-python-api-mysqlconnection

22.6.8.20 Method `MySQLConnection.cmd_process_kill(mysql_pid)'
..............................................................

Asks the server to kill the thread specified by `mysql_pid'. Although
still available, it is better to use the `KILL' SQL statement.

Returns a dictionary containing the OK packet information.

The following two lines have the same effect:


     >>> cnx.cmd_process_kill(123)
     >>> cnx.cmd_query('KILL 123')


File: manual.info,  Node: connector-python-api-mysqlconnection-cmd-query,  Next: connector-python-api-mysqlconnection-cmd-query-iter,  Prev: connector-python-api-mysqlconnection-cmd-process-kill,  Up: connector-python-api-mysqlconnection

22.6.8.21 Method `MySQLConnection.cmd_query(statement)'
.......................................................

This method sends the given `statement' to the MySQL server and returns
a result. To send multiple statements, use the *Note cmd_query_iter():
connector-python-api-mysqlconnection-cmd-query-iter.  method instead.

The returned dictionary contains information depending on what kind of
query was executed. If the query is a *Note `SELECT': select.
statement, the result contains information about columns. Other
statements return a dictionary containing OK or EOF packet information.

Errors received from the MySQL server are raised as exceptions.  An
`InterfaceError' is raised when multiple results are found.

Returns a dictionary.


File: manual.info,  Node: connector-python-api-mysqlconnection-cmd-query-iter,  Next: connector-python-api-mysqlconnection-cmd-quit,  Prev: connector-python-api-mysqlconnection-cmd-query,  Up: connector-python-api-mysqlconnection

22.6.8.22 Method `MySQLConnection.cmd_query_iter(statement)'
............................................................

Similar to the *Note cmd_query():
connector-python-api-mysqlconnection-cmd-query.  method, but returns a
generator object to iterate through results. Use `cmd_query_iter()'
when sending multiple statements, and separate the statements with
semicolons.

The following example shows how to iterate through the results after
sending multiple statements:

     statement = 'SELECT 1; INSERT INTO t1 VALUES (); SELECT 2'
     for result in cnx.cmd_query_iter(statement):
       if 'columns' in result:
         columns = result['columns']
         rows = cnx.get_rows()
       else:
         # do something useful with INSERT result

Returns a generator object.


File: manual.info,  Node: connector-python-api-mysqlconnection-cmd-quit,  Next: connector-python-api-mysqlconnection-cmd-refresh,  Prev: connector-python-api-mysqlconnection-cmd-query-iter,  Up: connector-python-api-mysqlconnection

22.6.8.23 Method `MySQLConnection.cmd_quit()'
.............................................

This method sends a `QUIT' command to the MySQL server, closing the
current connection. Since there is no response from the MySQL server,
the packet that was sent is returned.


File: manual.info,  Node: connector-python-api-mysqlconnection-cmd-refresh,  Next: connector-python-api-mysqlconnection-cmd-shutdown,  Prev: connector-python-api-mysqlconnection-cmd-quit,  Up: connector-python-api-mysqlconnection

22.6.8.24 Method `MySQLConnection.cmd_refresh(options)'
.......................................................

This method flushes tables or caches, or resets replication server
information. The connected user must have the `RELOAD' privilege.

The `options' argument should be a bitmask value constructed using
constants from the `constants.RefreshOption' class.

For a list of options, see *Note connector-python-api-refreshoption::.

Example:


     >>> from mysql.connector import RefreshOption
     >>> refresh = RefreshOption.LOG | RefreshOption.THREADS
     >>> cnx.cmd_refresh(refresh)


File: manual.info,  Node: connector-python-api-mysqlconnection-cmd-shutdown,  Next: connector-python-api-mysqlconnection-cmd-statistics,  Prev: connector-python-api-mysqlconnection-cmd-refresh,  Up: connector-python-api-mysqlconnection

22.6.8.25 Method `MySQLConnection.cmd_shutdown()'
.................................................

Asks the database server to shut down. The connected user must have the
`SHUTDOWN' privilege.

Returns a dictionary containing the OK packet information.


File: manual.info,  Node: connector-python-api-mysqlconnection-cmd-statistics,  Next: connector-python-api-mysqlconnection-disconnect,  Prev: connector-python-api-mysqlconnection-cmd-shutdown,  Up: connector-python-api-mysqlconnection

22.6.8.26 Method `MySQLConnection.cmd_statistics()'
...................................................

Returns a dictionary containing information about the MySQL server
including uptime in seconds and the number of running threads,
questions, reloads, and open tables.


File: manual.info,  Node: connector-python-api-mysqlconnection-disconnect,  Next: connector-python-api-mysqlconnection-get-row,  Prev: connector-python-api-mysqlconnection-cmd-statistics,  Up: connector-python-api-mysqlconnection

22.6.8.27 Method `MySQLConnection.disconnect()'
...............................................

This method tries to send a `QUIT' command and close the socket. It
raises no exceptions.

`MySQLConnection.close()' is a synonymous method name and more commonly
used.


File: manual.info,  Node: connector-python-api-mysqlconnection-get-row,  Next: connector-python-api-mysqlconnection-get-rows,  Prev: connector-python-api-mysqlconnection-disconnect,  Up: connector-python-api-mysqlconnection

22.6.8.28 Method `MySQLConnection.get_row()'
............................................

This method retrieves the next row of a query result set, returning a
tuple.

The tuple returned by `get_row()' consists of:

   * The row as a tuple containing byte objects, or `None' when no more
     rows are available.

   * EOF packet information as a dictionary containing `status_flag' and
     `warning_count', or `None' when the row returned is not the last
     row.

The `get_row()' method is used by *Note MySQLCursor:
connector-python-api-mysqlcursor.  to fetch rows.


File: manual.info,  Node: connector-python-api-mysqlconnection-get-rows,  Next: connector-python-api-mysqlconnection-get-server-info,  Prev: connector-python-api-mysqlconnection-get-row,  Up: connector-python-api-mysqlconnection

22.6.8.29 Method `MySQLConnection.get_rows(count=None)'
.......................................................

This method retrieves all or remaining rows of a query result set,
returning a tuple containing the rows as sequences and the EOF packet
information. The count argument can be used to obtain a given number of
rows. If count is not specified or is `None', all rows are retrieved.

The tuple returned by `get_rows()' consists of:

   * A list of tuples containing the row data as byte objects, or an
     empty list when no rows are available.

   * EOF packet information as a dictionary containing `status_flag' and
     `warning_count'.

An `InterfaceError' is raised when all rows have been retrieved.

*Note MySQLCursor: connector-python-api-mysqlcursor.  uses the
`get_rows()' method to fetch rows.

Returns a tuple.


File: manual.info,  Node: connector-python-api-mysqlconnection-get-server-info,  Next: connector-python-api-mysqlconnection-get-server-version,  Prev: connector-python-api-mysqlconnection-get-rows,  Up: connector-python-api-mysqlconnection

22.6.8.30 Method `MySQLConnection.get_server_info()'
....................................................

This method returns the MySQL server information verbatim as a string,
for example `'5.6.11-log'', or `None' when not connected.


File: manual.info,  Node: connector-python-api-mysqlconnection-get-server-version,  Next: connector-python-api-mysqlconnection-is-connected,  Prev: connector-python-api-mysqlconnection-get-server-info,  Up: connector-python-api-mysqlconnection

22.6.8.31 Method `MySQLConnection.get_server_version()'
.......................................................

This method returns the MySQL server version as a tuple, or `None' when
not connected.


File: manual.info,  Node: connector-python-api-mysqlconnection-is-connected,  Next: connector-python-api-mysqlconnection-isset-client-flag,  Prev: connector-python-api-mysqlconnection-get-server-version,  Up: connector-python-api-mysqlconnection

22.6.8.32 Method `MySQLConnection.is_connected()'
.................................................

Reports whether the connection to MySQL Server is available.

This method checks whether the connection to MySQL is available using
the *Note ping(): connector-python-api-mysqlconnection-ping.  method,
but unlike `ping()', `is_connected()' returns `True' when the
connection is available, `False' otherwise.


File: manual.info,  Node: connector-python-api-mysqlconnection-isset-client-flag,  Next: connector-python-api-mysqlconnection-ping,  Prev: connector-python-api-mysqlconnection-is-connected,  Up: connector-python-api-mysqlconnection

22.6.8.33 Method `MySQLConnection.isset_client_flag(flag)'
..........................................................

This method returns `True' if the client flag was set, `False'
otherwise.


File: manual.info,  Node: connector-python-api-mysqlconnection-ping,  Next: connector-python-api-mysqlconnection-reconnect,  Prev: connector-python-api-mysqlconnection-isset-client-flag,  Up: connector-python-api-mysqlconnection

22.6.8.34 Method `MySQLConnection.ping(attempts=1, delay=0)'
............................................................

Check whether the connection to the MySQL server is still available.

When `reconnect' is set to `True', one or more attempts are made to try
to reconnect to the MySQL server using the `reconnect()' method. Use the
`delay' argument (seconds) if you want to wait between each retry.

When the connection is not available, an `InterfaceError' is raised.
Use the *Note is_connected():
connector-python-api-mysqlconnection-is-connected.  method to check the
connection without raising an error.

Raises `InterfaceError' on errors.


File: manual.info,  Node: connector-python-api-mysqlconnection-reconnect,  Next: connector-python-api-mysqlconnection-rollback,  Prev: connector-python-api-mysqlconnection-ping,  Up: connector-python-api-mysqlconnection

22.6.8.35 Method `MySQLConnection.reconnect(attempts=1, delay=0)'
.................................................................

Attempt to reconnect to the MySQL server.

The argument `attempts' specifies the number of times a reconnect is
tried. The `delay' argument is the number of seconds to wait between
each retry.

You might set the number of attempts higher and use a longer delay when
you expect the MySQL server to be down for maintenance, or when you
expect the network to be temporarily unavailable.


File: manual.info,  Node: connector-python-api-mysqlconnection-rollback,  Next: connector-python-api-mysqlconnection-set-charset-collation,  Prev: connector-python-api-mysqlconnection-reconnect,  Up: connector-python-api-mysqlconnection

22.6.8.36 Method `MySQLConnection.rollback()'
.............................................

This method sends a `ROLLBACK' statement to the MySQL server, undoing
all data changes from the current transaction. By default,
Connector/Python does not autocommit, so it is possible to cancel
transactions when using transactional storage engines such as `InnoDB'.


     >>> cursor.execute("INSERT INTO employees (first_name) VALUES (%s)", ('Jane'))
     >>> cnx.rollback()

To commit modifications, see the *Note commit():
connector-python-api-mysqlconnection-commit.  method.


File: manual.info,  Node: connector-python-api-mysqlconnection-set-charset-collation,  Next: connector-python-api-mysqlconnection-set-client-flags,  Prev: connector-python-api-mysqlconnection-rollback,  Up: connector-python-api-mysqlconnection

22.6.8.37 Method `MySQLConnection.set_charset_collation(charset=None, collation=None)'
......................................................................................

This method sets the character set and collation to be used for the
current connection. The `charset' argument can be either the name of a
character set, or the numerical equivalent as defined in
`constants.CharacterSet'.

When `collation' is `None', the default collation for the character set
is used.

In the following example, we set the character set to `latin1' and the
collation to `latin1_swedish_ci' (the default collation for: `latin1'):


     >>> cnx = mysql.connector.connect(user='scott')
     >>> cnx.set_charset('latin1')

Specify a given collation as follows:


     >>> cnx = mysql.connector.connect(user='scott')
     >>> cnx.set_charset('latin1', 'latin1_general_ci')


File: manual.info,  Node: connector-python-api-mysqlconnection-set-client-flags,  Next: connector-python-api-mysqlconnection-start-transaction,  Prev: connector-python-api-mysqlconnection-set-charset-collation,  Up: connector-python-api-mysqlconnection

22.6.8.38 Method `MySQLConnection.set_client_flags(flags)'
..........................................................

This method sets the client flags to use when connecting to the MySQL
server, and returns the new value as an integer. The `flags' argument
can be either an integer or a sequence of valid client flag values (see
*Note connector-python-api-clientflag::).

If `flags' is a sequence, each item in the sequence sets the flag when
the value is positive or unsets it when negative. For example, to unset
`LONG_FLAG' and set the `FOUND_ROWS' flags:


     >>> from mysql.connector.constants import ClientFlag
     >>> cnx.set_client_flags([ClientFlag.FOUND_ROWS, -ClientFlag.LONG_FLAG])
     >>> cnx.reconnect()

Note that client flags are only set or used when connecting to the
MySQL server. It is therefore necessary to reconnect after making
changes.


File: manual.info,  Node: connector-python-api-mysqlconnection-start-transaction,  Next: connector-python-api-mysqlconnection-autocommit,  Prev: connector-python-api-mysqlconnection-set-client-flags,  Up: connector-python-api-mysqlconnection

22.6.8.39 Method `MySQLConnection.start_transaction()'
......................................................

This method starts a transaction. It accepts accepts arguments
indicating whether to use a consistent snapshot and which transaction
isolation level to use:

     cnx.start_transaction(consistent_snapshot=BOOL,
                           isolation_level=LEVEL)

The default `consistent_snapshot' value is `False'. The default
`isolation_level' value is `None', and permitted values are `'READ
UNCOMMITTED'', `'READ COMMITTED'', `'REPEATABLE READ'', and
`'SERIALIZABLE''.

Invoking `start_transaction()' raises a `ProgrammingError' if invoked
while a transaction is currently in progress. This differs from
executing a *Note `START TRANSACTION': commit. SQL statement while a
transaction is in progress; the statement implicitly commits the current
transaction.

To determine whether a transaction is active for the connection, use
the the *Note in_transaction:
connector-python-api-mysqlconnection-in-transaction.  property.

`start_transaction()' was added in MySQL Connector/Python 1.1.0.


File: manual.info,  Node: connector-python-api-mysqlconnection-autocommit,  Next: connector-python-api-mysqlconnection-charset-name,  Prev: connector-python-api-mysqlconnection-start-transaction,  Up: connector-python-api-mysqlconnection

22.6.8.40 Property `MySQLConnection.autocommit'
...............................................

This property can be assigned a value of `True' or `False' to enable or
disable the autocommit feature of MySQL. The property can be invoked to
retrieve the current autocommit setting.

Note that autocommit is disabled by default when connecting through
Connector/Python. This can be enabled using the `autocommit' *Note
connection parameter: connector-python-connectargs.

When the autocommit is turned off, you must *Note commit:
connector-python-api-mysqlconnection-commit.  transactions when using
transactional storage engines such as `InnoDB' or `NDBCluster'.


     >>> cnx.autocommit
     False
     >>> cnx.autocommit = True
     >>> cnx.autocommit
     True


File: manual.info,  Node: connector-python-api-mysqlconnection-charset-name,  Next: connector-python-api-mysqlconnection-collation-name,  Prev: connector-python-api-mysqlconnection-autocommit,  Up: connector-python-api-mysqlconnection

22.6.8.41 Property `MySQLConnection.charset_name'
.................................................

This property returns a string indicating which character set is used
for the connection, whether or not it is connected.


File: manual.info,  Node: connector-python-api-mysqlconnection-collation-name,  Next: connector-python-api-mysqlconnection-connection-id,  Prev: connector-python-api-mysqlconnection-charset-name,  Up: connector-python-api-mysqlconnection

22.6.8.42 Property `MySQLConnection.collation_name'
...................................................

This property returns a string indicating which collation is used for
the connection, whether or not it is connected.


File: manual.info,  Node: connector-python-api-mysqlconnection-connection-id,  Next: connector-python-api-mysqlconnection-database,  Prev: connector-python-api-mysqlconnection-collation-name,  Up: connector-python-api-mysqlconnection

22.6.8.43 Property `MySQLConnection.connection_id'
..................................................

This property returns the integer connection ID (thread ID or session
ID) for the current connection or `None' when not connected.


File: manual.info,  Node: connector-python-api-mysqlconnection-database,  Next: connector-python-api-mysqlconnection-get-warnings,  Prev: connector-python-api-mysqlconnection-connection-id,  Up: connector-python-api-mysqlconnection

22.6.8.44 Property `MySQLConnection.database'
.............................................

This property sets the current (default) database by executing a `USE'
statement. The property can also be used to retrieve the current
database name.


     >>> cnx.database = 'test'
     >>> cnx.database = 'mysql'
     >>> cnx.database
     u'mysql'

Returns a string.


File: manual.info,  Node: connector-python-api-mysqlconnection-get-warnings,  Next: connector-python-api-mysqlconnection-in-transaction,  Prev: connector-python-api-mysqlconnection-database,  Up: connector-python-api-mysqlconnection

22.6.8.45 Property `MySQLConnection.get_warnings'
.................................................

This property can be assigned a value of `True' or `False' to enable or
disable whether warnings should be fetched automatically. The default is
`False' (default). The property can be invoked to retrieve the current
warnings setting.

Fetching warnings automatically can be useful when debugging queries.
Cursors make warnings available through the method *Note
MySQLCursor.fetchwarnings():
connector-python-api-mysqlcursor-fetchwarnings.


     >>> cnx.get_warnings = True
     >>> cursor.execute('SELECT "a"+1')
     >>> cursor.fetchall()
     [(1.0,)]
     >>> cursor.fetchwarnings()
     [(u'Warning', 1292, u"Truncated incorrect DOUBLE value: 'a'")]

Returns `True' or `False'.


File: manual.info,  Node: connector-python-api-mysqlconnection-in-transaction,  Next: connector-python-api-mysqlconnection-raise-on-warnings,  Prev: connector-python-api-mysqlconnection-get-warnings,  Up: connector-python-api-mysqlconnection

22.6.8.46 Property `MySQLConnection.in_transaction'
...................................................

This property returns `True' or `False' to indicate whether a
transaction is active for the connection. The value is `True'
regardless of whether you start a transaction using the *Note
`start_transaction()':
connector-python-api-mysqlconnection-start-transaction.  API call or by
directly executing a SQL statement such as *Note `START TRANSACTION':
commit. or *Note `BEGIN': commit.


     >>> cnx.start_transaction()
     >>> cnx.in_transaction
     True
     >>> cnx.commit()
     >>> cnx.in_transaction
     False

`in_transaction' was added in MySQL Connector/Python 1.1.0.


File: manual.info,  Node: connector-python-api-mysqlconnection-raise-on-warnings,  Next: connector-python-api-mysqlconnection-server-host,  Prev: connector-python-api-mysqlconnection-in-transaction,  Up: connector-python-api-mysqlconnection

22.6.8.47 Property `MySQLConnection.raise_on_warnings'
......................................................

This property can be assigned a value of `True' or `False' to enable or
disable whether warnings should raise exceptions. The default is
`False' (default). The property can be invoked to retrieve the current
exceptions setting.

Setting `raise_on_warnings' also sets `get_warnings' because warnings
need to be fetched so they can be raised as exceptions.

Note that you might always want to set the SQL mode if you would like
to have the MySQL server directly report warnings as errors (see *Note
connector-python-api-mysqlconnection-sql-mode::).  It is also good to
use transactional engines so transactions can be rolled back when
catching the exception.

Result sets needs to be fetched completely before any exception can be
raised. The following example shows the execution of a query that
produces a warning:


     >>> cnx.raise_on_warnings = True
     >>> cursor.execute('SELECT "a"+1')
     >>> cursor.fetchall()
     ..
     mysql.connector.errors.DataError: 1292: Truncated incorrect DOUBLE value: 'a'

Returns `True' or `False'.


File: manual.info,  Node: connector-python-api-mysqlconnection-server-host,  Next: connector-python-api-mysqlconnection-server-port,  Prev: connector-python-api-mysqlconnection-raise-on-warnings,  Up: connector-python-api-mysqlconnection

22.6.8.48 Property `MySQLConnection.server_host'
................................................

This read-only property returns the host name or IP address used for
connecting to the MySQL server.

Returns a string.


File: manual.info,  Node: connector-python-api-mysqlconnection-server-port,  Next: connector-python-api-mysqlconnection-sql-mode,  Prev: connector-python-api-mysqlconnection-server-host,  Up: connector-python-api-mysqlconnection

22.6.8.49 Property `MySQLConnection.server_port'
................................................

This read-only property returns the TCP/IP port used for connecting to
the MySQL server.

Returns an integer.


File: manual.info,  Node: connector-python-api-mysqlconnection-sql-mode,  Next: connector-python-api-mysqlconnection-time-zone,  Prev: connector-python-api-mysqlconnection-server-port,  Up: connector-python-api-mysqlconnection

22.6.8.50 Property `MySQLConnection.sql_mode'
.............................................

This property is used to retrieve and set the SQL Modes for the current
connection. The value should be a list of different modes separated by
comma (","), or a sequence of modes, preferably using the
`constants.SQLMode' class.

To unset all modes, pass an empty string or an empty sequence.


     >>> cnx.sql_mode = 'TRADITIONAL,NO_ENGINE_SUBSTITUTION'
     >>> cnx.sql_mode.split(',')
     [u'STRICT_TRANS_TABLES', u'STRICT_ALL_TABLES', u'NO_ZERO_IN_DATE',
     u'NO_ZERO_DATE', u'ERROR_FOR_DIVISION_BY_ZERO', u'TRADITIONAL',
     u'NO_AUTO_CREATE_USER', u'NO_ENGINE_SUBSTITUTION']

     >>> from mysql.connector.constants import SQLMode
     >>> cnx.sql_mode = [ SQLMode.NO_ZERO_DATE, SQLMode.REAL_AS_FLOAT]
     >>> cnx.sql_mode

     u'REAL_AS_FLOAT,NO_ZERO_DATE'

Returns a string.


File: manual.info,  Node: connector-python-api-mysqlconnection-time-zone,  Next: connector-python-api-mysqlconnection-unix-socket,  Prev: connector-python-api-mysqlconnection-sql-mode,  Up: connector-python-api-mysqlconnection

22.6.8.51 Property `MySQLConnection.time_zone'
..............................................

This property is used to set or retrieve the time zone session variable
for the current connection.


     >>> cnx.time_zone = '+00:00'
     >>> cur.execute('SELECT NOW()') ; cur.fetchone()
     (datetime.datetime(2012, 6, 15, 11, 24, 36),)
     >>> cnx.time_zone = '-09:00'
     >>> cur.execute('SELECT NOW()') ; cur.fetchone()
     (datetime.datetime(2012, 6, 15, 2, 24, 44),)
     >>> cnx.time_zone
     u'-09:00'

Returns a string.


File: manual.info,  Node: connector-python-api-mysqlconnection-unix-socket,  Next: connector-python-api-mysqlconnection-user,  Prev: connector-python-api-mysqlconnection-time-zone,  Up: connector-python-api-mysqlconnection

22.6.8.52 Property `MySQLConnection.unix_socket'
................................................

This read-only property returns the Unix socket file for connecting to
the MySQL server.

Returns a string.


File: manual.info,  Node: connector-python-api-mysqlconnection-user,  Prev: connector-python-api-mysqlconnection-unix-socket,  Up: connector-python-api-mysqlconnection

22.6.8.53 Property `MySQLConnection.user'
.........................................

This read-only property returns the user name used for connecting to
the MySQL server.

Returns a string.


File: manual.info,  Node: connector-python-api-mysqlconnectionpool,  Next: connector-python-api-pooledmysqlconnection,  Prev: connector-python-api-mysqlconnection,  Up: connector-python-reference

22.6.8.54 Class `pooling.MySQLConnectionPool'
.............................................

* Menu:

* connector-python-api-mysqlconnectionpool-constructor::  Constructor `pooling.MySQLConnectionPool'
* connector-python-api-mysqlconnectionpool-add-connection::  Method `MySQLConnectionPool.add_connection()'
* connector-python-api-mysqlconnectionpool-get-connection::  Method `MySQLConnectionPool.get_connection()'
* connector-python-api-mysqlconnectionpool-set-config::  Method `MySQLConnectionPool.set_config()'
* connector-python-api-mysqlconnectionpool-pool-name::  Property `MySQLConnectionPool.pool_name'

This class provides for the instantiation and management of connection
pools.


File: manual.info,  Node: connector-python-api-mysqlconnectionpool-constructor,  Next: connector-python-api-mysqlconnectionpool-add-connection,  Prev: connector-python-api-mysqlconnectionpool,  Up: connector-python-api-mysqlconnectionpool

22.6.8.55 Constructor `pooling.MySQLConnectionPool'
...................................................

Syntax:

     MySQLConnectionPool(pool_name = None, pool_size = 5, **kwargs)

This constructor instantiates an object that manages a connection pool.

Arguments:

   * `pool_name': The pool name. If this argument is not given,
     Connector/Python automatically generates the name, composed from
     whichever of the `host', `port', `user', and `database' connection
     arguments are given in `kwargs', in that order.

     It is not an error for multiple pools to have the same name.  An
     application that must distinguish pools by their `pool_name'
     property should create each pool with a distinct name.

   * `pool_size': The pool size. If this argument is not given, the
     default is 5.

   * `kwargs': Optional additional connection arguments, as described in
     *Note connector-python-connectargs::.

Example:

     dbconfig = {
       "database": "test",
       "user":     "joe"
     }

     cnxpool = mysql.connector.pooling.MySQLConnectionPool(pool_name = "mypool",
                                                           pool_size = 3,
                                                           **dbconfig)


File: manual.info,  Node: connector-python-api-mysqlconnectionpool-add-connection,  Next: connector-python-api-mysqlconnectionpool-get-connection,  Prev: connector-python-api-mysqlconnectionpool-constructor,  Up: connector-python-api-mysqlconnectionpool

22.6.8.56 Method `MySQLConnectionPool.add_connection()'
.......................................................

Syntax:

     cnxpool.add_connection(cnx = None)

This method adds a new or existing `MySQLConnection' to the pool, or
raises a `PoolError' if the pool is full.

Arguments:

   * `cnx': The `MySQLConnection' object to be added to the pool. If
     this argument is missing, the pool creates a new connection and
     adds it.

Example:

     cnxpool.add_connection()    # add new connection to pool
     cnxpool.add_connection(cnx) # add existing connection to pool


File: manual.info,  Node: connector-python-api-mysqlconnectionpool-get-connection,  Next: connector-python-api-mysqlconnectionpool-set-config,  Prev: connector-python-api-mysqlconnectionpool-add-connection,  Up: connector-python-api-mysqlconnectionpool

22.6.8.57 Method `MySQLConnectionPool.get_connection()'
.......................................................

Syntax:

     cnxpool.get_connection()

This method returns a connection from the pool, or raises a `PoolError'
if no connections are available.

Example:

     cnx = cnxpool.get_connection()


File: manual.info,  Node: connector-python-api-mysqlconnectionpool-set-config,  Next: connector-python-api-mysqlconnectionpool-pool-name,  Prev: connector-python-api-mysqlconnectionpool-get-connection,  Up: connector-python-api-mysqlconnectionpool

22.6.8.58 Method `MySQLConnectionPool.set_config()'
...................................................

Syntax:

     cnxpool.set_config(**kwargs)

This method sets the configuration parameters for connections in the
pool. Connections requested from the pool after the configuration
change use the new parameters. Connections obtained before the change
remain unaffected, but when they are closed (returned to the pool) are
reopened with the new parameters before being returned by the pool for
subsequent connection requests.

Arguments:

   * `kwargs': Connection arguments.

Example:

     dbconfig = {
       "database": "performance_schema",
       "user":     "admin",
       "password": "secret"
     }

     cnxpool.set_config(**dbconfig)


File: manual.info,  Node: connector-python-api-mysqlconnectionpool-pool-name,  Prev: connector-python-api-mysqlconnectionpool-set-config,  Up: connector-python-api-mysqlconnectionpool

22.6.8.59 Property `MySQLConnectionPool.pool_name'
..................................................

Syntax:

     cnxpool.pool_name

This property returns the connection pool name.

Example:

     name = cnxpool.pool_name


File: manual.info,  Node: connector-python-api-pooledmysqlconnection,  Next: connector-python-api-mysqlcursor,  Prev: connector-python-api-mysqlconnectionpool,  Up: connector-python-reference

22.6.8.60 Class `pooling.PooledMySQLConnection'
...............................................

* Menu:

* connector-python-api-pooledmysqlconnection-constructor::  Constructor `pooling.PooledMySQLConnection'
* connector-python-api-pooledmysqlconnection-close::  Method `PooledMySQLConnection.close()'
* connector-python-api-pooledmysqlconnection-config::  Method `PooledMySQLConnection.config()'
* connector-python-api-pooledmysqlconnection-pool-name::  Property `PooledMySQLConnection.pool_name'

This class is used by `MySQLConnectionPool' to return a pooled
connection instance. It is also the class used for connections obtained
with calls to the `connect()' method that name a connection pool (see
*Note connector-python-connection-pooling::).

`PooledMySQLConnection' pooled connection objects are similar to
`MySQLConnection' unpooled connection objects, with these differences:

   * To release a pooled connection obtained from a connection pool,
     invoke its `close()' method, just as for any unpooled connection.
     However, for a pooled connection, `close()' does not actually
     close the connection but returns it to the pool and makes it
     available for subsequent connection requests.

   * A pooled connection cannot be reconfigured using its `config()'
     method. Connection changes must be done through the pool object
     itself, as described shortly.

   * A pooled connection has a `pool_name' property that returns the
     pool name.


File: manual.info,  Node: connector-python-api-pooledmysqlconnection-constructor,  Next: connector-python-api-pooledmysqlconnection-close,  Prev: connector-python-api-pooledmysqlconnection,  Up: connector-python-api-pooledmysqlconnection

22.6.8.61 Constructor `pooling.PooledMySQLConnection'
.....................................................

Syntax:

     PooledMySQLConnection(cnxpool, cnx)

This constructor takes connection pool and connection arguments and
returns a pooled connection. It is used by the `MySQLConnectionPool'
class.

Arguments:

   * `cnxpool': A `MySQLConnectionPool' instance.

   * `cnx': A `MySQLConnection' instance.

Example:

     pcnx = mysql.connector.pooling.PooledMySQLConnection(cnxpool, cnx)


File: manual.info,  Node: connector-python-api-pooledmysqlconnection-close,  Next: connector-python-api-pooledmysqlconnection-config,  Prev: connector-python-api-pooledmysqlconnection-constructor,  Up: connector-python-api-pooledmysqlconnection

22.6.8.62 Method `PooledMySQLConnection.close()'
................................................

Syntax:

     cnx.close()

Returns a pooled connection to its connection pool.

For a pooled connection, `close()' does not actually close it but
returns it to the pool and makes it available for subsequent connection
requests.

If the pool configuration parameters are changed, a returned connection
is closed and reopened with the new configuration before being returned
from the pool again in response to a connection request.


File: manual.info,  Node: connector-python-api-pooledmysqlconnection-config,  Next: connector-python-api-pooledmysqlconnection-pool-name,  Prev: connector-python-api-pooledmysqlconnection-close,  Up: connector-python-api-pooledmysqlconnection

22.6.8.63 Method `PooledMySQLConnection.config()'
.................................................

For pooled connections, the `config()' method raises a `PoolError'
exception. Configuration for pooled connections should be done using
the pool object.


File: manual.info,  Node: connector-python-api-pooledmysqlconnection-pool-name,  Prev: connector-python-api-pooledmysqlconnection-config,  Up: connector-python-api-pooledmysqlconnection

22.6.8.64 Property `PooledMySQLConnection.pool_name'
....................................................

Syntax:

     cnx.pool_name

This property returns the name of the connection pool to which the
connection belongs.

Example:

     cnx = cnxpool.get_connection()
     name = cnx.pool_name


File: manual.info,  Node: connector-python-api-mysqlcursor,  Next: connector-python-api-mysqlcursorbuffered,  Prev: connector-python-api-pooledmysqlconnection,  Up: connector-python-reference

22.6.8.65 Class `cursor.MySQLCursor'
....................................

* Menu:

* connector-python-api-mysqlcursor-constructor::  Constructor `cursor.MySQLCursor'
* connector-python-api-mysqlcursor-callproc::  Method `MySQLCursor.callproc(procname, args=())'
* connector-python-api-mysqlcursor-close::  Method `MySQLCursor.close()'
* connector-python-api-mysqlcursor-execute::  Method `MySQLCursor.execute(operation, params=None, multi=False)'
* connector-python-api-mysqlcursor-executemany::  Method `MySQLCursor.executemany(operation, seq_params)'
* connector-python-api-mysqlcursor-fetchall::  Method `MySQLCursor.fetchall()'
* connector-python-api-mysqlcursor-fetchmany::  Method `MySQLCursor.fetchmany(size=1)'
* connector-python-api-mysqlcursor-fetchone::  Method `MySQLCursor.fetchone()'
* connector-python-api-mysqlcursor-fetchwarnings::  Method `MySQLCursor.fetchwarnings()'
* connector-python-api-mysqlcursor-stored-results::  Method `MySQLCursor.stored_results()'
* connector-python-api-mysqlcursor-column-names::  Property `MySQLCursor.column_names'
* connector-python-api-mysqlcursor-description::  Property `MySQLCursor.description'
* connector-python-api-mysqlcursor-lastrowid::  Property `MySQLCursor.lastrowid'
* connector-python-api-mysqlcursor-statement::  Property `MySQLCursor.statement'
* connector-python-api-mysqlcursor-with-rows::  Property `MySQLCursor.with_rows'

The `MySQLCursor' class is used to instantiate objects that can execute
operations such as SQL queries. They interact with the MySQL server
using a `MySQLConnection' object.

These related classes inherit from `cursor.MySQLCursor':

   * `cursor.MySQLCursorBuffered' creates a buffered cursor. See *Note
     connector-python-api-mysqlcursorbuffered::.

   * `cursor.MySQLCursorBuffered' creates a cursor for executing
     prepared statements. See *Note
     connector-python-api-mysqlcursorprepared::.


File: manual.info,  Node: connector-python-api-mysqlcursor-constructor,  Next: connector-python-api-mysqlcursor-callproc,  Prev: connector-python-api-mysqlcursor,  Up: connector-python-api-mysqlcursor

22.6.8.66 Constructor `cursor.MySQLCursor'
..........................................

The constructor initializes the instance with the optional
`connection', which should be an instance of *Note `MySQLConnection':
connector-python-api-mysqlconnection.

In most cases, the `MySQLConnection' *Note `cursor()':
connector-python-api-mysqlconnection-cursor.  method is used to
instantiate a `MySQLCursor' object.


File: manual.info,  Node: connector-python-api-mysqlcursor-callproc,  Next: connector-python-api-mysqlcursor-close,  Prev: connector-python-api-mysqlcursor-constructor,  Up: connector-python-api-mysqlcursor

22.6.8.67 Method `MySQLCursor.callproc(procname, args=())'
..........................................................

This method calls a stored procedure with the given name. The `args'
sequence of parameters must contain one entry for each argument that
the routine expects. The result is returned as modified copy of the
input sequence. Input parameters are left untouched. Output and
input/output parameters may be replaced with new values.

Result sets produced by the stored procedure are automatically fetched
and stored as *Note MySQLCursorBuffered:
connector-python-api-mysqlcursorbuffered.  instances. For more
information, see *Note stored_results():
connector-python-api-mysqlcursor-stored-results.

The following example shows how to execute a stored procedure which
takes two parameters, multiplies the values and returns the product:


     # Definition of the multiply stored procedure:
     # CREATE PROCEDURE multiply(IN pFac1 INT, IN pFac2 INT, OUT pProd INT)
     # BEGIN
     #  SET pProd := pFac1 * pFac2;
     # END

     >>> args = (5, 5, 0) # 0 is to hold value of the OUT parameter pProd
     >>> cursor.callproc('multiply', args)
     ('5', '5', 25L)


File: manual.info,  Node: connector-python-api-mysqlcursor-close,  Next: connector-python-api-mysqlcursor-execute,  Prev: connector-python-api-mysqlcursor-callproc,  Up: connector-python-api-mysqlcursor

22.6.8.68 Method `MySQLCursor.close()'
......................................

This method closes the MySQL cursor, resetting all results, and make
sure that the cursor object has no reference to the connection object.

Use `close()' every time you are done using the cursor.


File: manual.info,  Node: connector-python-api-mysqlcursor-execute,  Next: connector-python-api-mysqlcursor-executemany,  Prev: connector-python-api-mysqlcursor-close,  Up: connector-python-api-mysqlcursor

22.6.8.69 Method `MySQLCursor.execute(operation, params=None, multi=False)'
...........................................................................

This method prepare the given database `operation' (query or command).
The parameters found in the tuple or dictionary `params' are bound to
the variables in the operation. Variables are specified using `%s'
(`format') or `%(NAME)s' (`pyformat') parameter style.

This example inserts information about a new employee, then selects the
data for this person:

     insert = (
     "INSERT INTO employees (emp_no, first_name, last_name, hire_date) "
     "VALUES (%s, %s, %s, %s)")
     data = (2, 'Jane', 'Doe', datetime.date(2012, 3, 23))
     cursor.execute(insert, data)

     select = "SELECT * FROM employees WHERE emp_no = %(emp_no)s"
     cursor.execute(select, { 'emp_no': 2 })

Note that the data values are converted as necessar from Python objects
to something MySQL understand. In the preceding example, the
`datetime.date()' instance is converted to `'2012-03-23''.

When `multi' is set to `True', `execute()' is able to execute multiple
statements. It returns an iterator that makes it possible to process
the results for each statement. Note that using parameters is not
working well in this case, and it is usually a good idea to execute
each statement on its own.

The following example selects and inserts data in one operation and
displays the result:

     operation = 'SELECT 1; INSERT INTO t1 VALUES (); SELECT 2'
     for result in cursor.execute(operation):
       if result.with_rows:
         print("Statement '{}' has following rows:".format(
           result.statement))
         print(result.fetchall())
       else:
         print("Affected row(s) by query '{}' was {}".format(
           result.statement, result.rowcount))

If the connection was configured to fetch warnings, warnings generated
by the operation are available through the *Note
MySQLCursor.fetchwarnings():
connector-python-api-mysqlcursor-fetchwarnings.  method.

Returns an iterator when `multi' is `True'.


File: manual.info,  Node: connector-python-api-mysqlcursor-executemany,  Next: connector-python-api-mysqlcursor-fetchall,  Prev: connector-python-api-mysqlcursor-execute,  Up: connector-python-api-mysqlcursor

22.6.8.70 Method `MySQLCursor.executemany(operation, seq_params)'
.................................................................

This method prepares a database operation (query or command) and then
executes it against all parameter sequences or mappings found in the
sequence `seq_of_params'.

The `executemany()' iterates through the sequence of parameters calling
the `execute()' method. Inserting data, however, is optimized by
batching them using multipler-row syntax.

The following example inserts three records:

     data = [
       ('Jane', date(2005, 2, 12)),
       ('Joe', date(2006, 5, 23)),
       ('John', date(2010, 10, 3)),
     ]
     stmt = "INSERT INTO employees (first_name, hire_date) VALUES (%s, %s)"
     cursor.executemany(stmt, data)

In the preceding example, the *Note `INSERT': insert. statement sent to
MySQL would be:

     INSERT INTO employees (first_name, hire_date)
     VALUES ('Jane', '2005-02-12'), ('Joe', '2006-05-23'), ('John', '2010-10-03')

Tt is not possible to execute multiple statements using the
`executemany()' method. Doing so raises an `InternalError' exception.


File: manual.info,  Node: connector-python-api-mysqlcursor-fetchall,  Next: connector-python-api-mysqlcursor-fetchmany,  Prev: connector-python-api-mysqlcursor-executemany,  Up: connector-python-api-mysqlcursor

22.6.8.71 Method `MySQLCursor.fetchall()'
.........................................

The method fetches all or remaining rows of a query result set,
returning a list of tuples. When no more rows are available, it returns
an empty list.

The following example shows how to retrieve the first two rows of a
result set, and then retrieve the remaining rows:


     >>> cursor.execute("SELECT * FROM employees ORDER BY emp_no")
     >>> head_rows = cursor.fetchmany(size=2)
     >>> remaining_rows = cursor.fetchall()

You must fetch all rows before being able to execute new queries using
the same connection.


File: manual.info,  Node: connector-python-api-mysqlcursor-fetchmany,  Next: connector-python-api-mysqlcursor-fetchone,  Prev: connector-python-api-mysqlcursor-fetchall,  Up: connector-python-api-mysqlcursor

22.6.8.72 Method `MySQLCursor.fetchmany(size=1)'
................................................

This method fetches the next set of rows of a query result, returning a
list of tuples. When no more rows are available, it returns an empty
list.

The number of rows returned can be specified using the size argument,
which defaults to one. Fewer rows might be returned, when there are not
more rows available than specified by the argument.

Note that you must fetch all rows before being able to execute new
queries using the same connection.


File: manual.info,  Node: connector-python-api-mysqlcursor-fetchone,  Next: connector-python-api-mysqlcursor-fetchwarnings,  Prev: connector-python-api-mysqlcursor-fetchmany,  Up: connector-python-api-mysqlcursor

22.6.8.73 Method `MySQLCursor.fetchone()'
.........................................

This method retrieves the next row of a query result set, returning a
single sequence, or `None' when no more rows are available.The returned
tuple consists of data returned by the MySQL server converted to Python
objects.

The `fetchone()' method is used by *Note fetchmany():
connector-python-api-mysqlcursor-fetchmany.  and *Note fetchall():
connector-python-api-mysqlcursor-fetchall.  It is also used when using
the `MySQLCursor' instance as an iterator.

The following example shows how to use `fetchone()' to process a query
result, first using a `while' loop, then using an iterator:

     # Using a while-loop
     cursor.execute("SELECT * FROM employees")
     row = cursor.fetchone()
     while row is not None:
       print(row)
       row = cursor.fetchone()

     # Using the cursor as iterator
     cursor.execute("SELECT * FROM employees")
     for row in cursor:
       print(row)

You must fetch all rows before being able to execute new queries using
the same connection.


File: manual.info,  Node: connector-python-api-mysqlcursor-fetchwarnings,  Next: connector-python-api-mysqlcursor-stored-results,  Prev: connector-python-api-mysqlcursor-fetchone,  Up: connector-python-api-mysqlcursor

22.6.8.74 Method `MySQLCursor.fetchwarnings()'
..............................................

This method returns a list of tuples containing warnings generated by
previously executed statement. Use the connection's `get_warnings'
property to set whether warnings are to be fetched.

The following example shows a *Note `SELECT': select. statement which
generated a warning:


     >>> cnx.get_warnings = True
     >>> cursor.execute('SELECT "a"+1')
     >>> cursor.fetchall()
     [(1.0,)]
     >>> cursor.fetchwarnings()
     [(u'Warning', 1292, u"Truncated incorrect DOUBLE value: 'a'")]

It is also possible to raise errors when warnings are found. See the
`MySQLConnection' *Note raise_on_warnings:
connector-python-api-mysqlconnection-raise-on-warnings.  property.


File: manual.info,  Node: connector-python-api-mysqlcursor-stored-results,  Next: connector-python-api-mysqlcursor-column-names,  Prev: connector-python-api-mysqlcursor-fetchwarnings,  Up: connector-python-api-mysqlcursor

22.6.8.75 Method `MySQLCursor.stored_results()'
...............................................

This method returns a list iterator object that can be used to process
result sets produced by a stored procedure after calling it using the
*Note callproc(): connector-python-api-mysqlcursor-callproc.  method.

The following example executes a stored procedure that produces two
result sets, then uses `stored_results()' to retrieve them:


     >>> cursor.callproc('sp1')
     ()
     >>> for result in cursor.stored_results():
     ...     print result.fetchall()
     ...
     [(1,)]
     [(2,)]

The result sets remain available until you execute another operation or
call another stored procedure.


File: manual.info,  Node: connector-python-api-mysqlcursor-column-names,  Next: connector-python-api-mysqlcursor-description,  Prev: connector-python-api-mysqlcursor-stored-results,  Up: connector-python-api-mysqlcursor

22.6.8.76 Property `MySQLCursor.column_names'
.............................................

This read-only property returns the column names of a result set as
sequence of (Unicode) strings.

The following example shows how to create a dictionary from a tuple
containing data with keys using `column_names':

     cursor.execute("SELECT last_name, first_name, hire_date "
       "FROM employees WHERE emp_no = %s", (123,))
     row = dict(zip(cursor.column_names, cursor.fetchone())
     print("{last_name}, {first_name}: {hire_date}".format(row))


File: manual.info,  Node: connector-python-api-mysqlcursor-description,  Next: connector-python-api-mysqlcursor-lastrowid,  Prev: connector-python-api-mysqlcursor-column-names,  Up: connector-python-api-mysqlcursor

22.6.8.77 Property `MySQLCursor.description'
............................................

This read-only property returns a list of tuples describing the columns
in a result set. Each tuple contains values as follows:

     (column_name,
      type,
      None,
      None,
      None,
      None,
      null_ok,
      column_flags)

The following example shows how to interpret `description' tuples:

     import mysql.connector
     from mysql.connector import FieldType

     ...

     cursor.execute("SELECT emp_no, last_name, hire_date "
       "FROM employees WHERE emp_no = %s", (123,))
     for i in range(len(cursor.description)):
       print("Column {}:".format(i+1))
       desc = cursor.description[i]
       print("column_name = {}".format(desc[0]))
       print("type = {} ({})".format(desc[1], FieldType.get_info(desc[1])))
       print("null_ok = {}".format(desc[6]))
       print("column_flags = {}".format(desc[7]))

The output looks like this:

     Column 1:
     column_name = emp_no
     type = 3 (LONG)
     null_ok = 0
     column_flags = 20483
     Column 2:
     column_name = last_name
     type = 253 (VAR_STRING)
     null_ok = 0
     column_flags = 4097
     Column 3:
     column_name = hire_date
     type = 10 (DATE)
     null_ok = 0
     column_flags = 4225

The `column_flags' value is an instance of the `constants.FieldFlag'
class. To see how to interpret it, do this:

     >>> from mysql.connector import FieldFlag
     >>> FieldFlag.desc


File: manual.info,  Node: connector-python-api-mysqlcursor-lastrowid,  Next: connector-python-api-mysqlcursor-statement,  Prev: connector-python-api-mysqlcursor-description,  Up: connector-python-api-mysqlcursor

22.6.8.78 Property `MySQLCursor.lastrowid'
..........................................

This read-only property returns the row ID of the last modified row.
For example, if you perform an *Note `INSERT': insert. into a table
that contains an `AUTO_INCREMENT' column, `lastrowid' returns the
`AUTO_INCREMENT' value for the new row. For an example, see *Note
connector-python-example-cursor-transaction::.


File: manual.info,  Node: connector-python-api-mysqlcursor-statement,  Next: connector-python-api-mysqlcursor-with-rows,  Prev: connector-python-api-mysqlcursor-lastrowid,  Up: connector-python-api-mysqlcursor

22.6.8.79 Property `MySQLCursor.statement'
..........................................

This read-only property returns the last executed statement as a
string. The string can contain multiple statements if a
multiple-statement string was executed.

The `statement' property can be useful for debugging and displaying
what was sent to the MySQL server.


File: manual.info,  Node: connector-python-api-mysqlcursor-with-rows,  Prev: connector-python-api-mysqlcursor-statement,  Up: connector-python-api-mysqlcursor

22.6.8.80 Property `MySQLCursor.with_rows'
..........................................

This read-only property returns `True' when the result of the executed
operation provides rows.

The `with_rows' property is useful when it is necessary to determine
whether a statement produces a result set and you need to fetch rows.
The following example retrieves the rows returned by the *Note
`SELECT': select.  statement, but reports only the affected-rows value
for the *Note `UPDATE': update. statement:

     import mysql.connector
     cnx = mysql.connector.connect(user='scott', database='test')
     cursor = cnx.cursor()
     operation = 'SELECT 1; UPDATE t1 SET c1 = 2; SELECT 2'
     for result in cursor.execute(operation, multi=True):
       if result.with_rows:
         result.fetchall()
       else:
         print("Updated row(s): {}".format(result.rowcount))


File: manual.info,  Node: connector-python-api-mysqlcursorbuffered,  Next: connector-python-api-mysqlcursorprepared,  Prev: connector-python-api-mysqlcursor,  Up: connector-python-reference

22.6.8.81 Class `cursor.MySQLCursorBuffered'
............................................

This class inherits from `cursor.MySQLCursor' and, if needed,
automatically retrieves rows after an operation has been executed.

`MySQLCursorBuffered' can be useful in situations where two queries,
with small result sets, need to be combined or computed with each other.

You can either use the `buffered' argument when using the connection's
*Note `cursor()': connector-python-api-mysqlconnection-cursor. method,
or you can use the `buffered' *Note connection option:
connector-python-connectargs. to make all cursors created for the
connection buffering by default.

     import mysql.connector

     cnx = mysql.connector.connect()

     # Only this particular cursor will buffer results
     cnx.cursor(buffered=True)

     # All cursors will be buffering by default
     cnx2 = mysql.connector.connect(buffered=True)

For a practical use case, see *Note
connector-python-tutorial-cursorbuffered::.


File: manual.info,  Node: connector-python-api-mysqlcursorprepared,  Next: connector-python-api-clientflag,  Prev: connector-python-api-mysqlcursorbuffered,  Up: connector-python-reference

22.6.8.82 Class `cursor.MySQLCursorPrepared'
............................................

One way to execute a prepared SQL statement is by use of the `PREPARE'
and `EXECUTE' statements. However, to repeatedly execute the same
statement with different data for different executions, it is more
efficient to use the binary client/server protocol to send and receive
data.  For information about this protocol, see *Note
c-api-prepared-statements::.

The `MySQLCursorPrepared' class enables within Connector/Python
execution of prepared statements using the binary protocol. This class
inherits from `cursor.MySQLCursor'. To create an instance of the
`MySQLCursorPrepared' class, use the `cursor_class' argument to the
`cursor()' method:

     import mysql.connector
     from mysql.connector.cursor import MySQLCursorPrepared

     cnx = mysql.connector.connect(database='employees')
     cursor = cnx.cursor(cursor_class=MySQLCursorPrepared)

The `cursor()' method of the connection object returns a
`MySQLCursorPrepared' object when called with a
`cursor_class=MySQLCursorPrepared' argument.

A cursor instantiated from the `MySQLCursorPrepared' class works like
this:

   * The first time you pass a statement to the cursor's `execute()'
     method, it prepares the statement. For subsequent invocations of
     `execute()', the prepare phase is skipped if the statement is the
     same.

   * The `execute()' method takes an optional second argument
     containing a list of data values to associate with parameter
     markers in the statement. If the list argument is present, there
     must be one value per parameter marker.

Example:

     cursor = cnx.cursor(cursor_class=MySQLCursorPrepared)
     stmt = "SELECT fullname FROM employees WHERE id = ?"  # (1)
     cursor.execute(stmt, (5,))                            # (2)
     # ... fetch data ...
     cursor.execute(stmt, (10,))                           # (3)
     # ... fetch data ...

  1. The `?' within the statement is a parameter marker. Do not put
     quote marks around parameter markers.

  2. For the first call to the `execute()' method, the cursor prepares
     the statement. If data is given in the same call, it also executes
     the statement and you should fetch the data.

  3. For subsequent `execute()' calls that pass the same SQL statement,
     the cursor skips the prepare phase.

Prepared statements executed with `MySQLCursorPrepared' can use the
`format' or `qmark' parameterization style. This differs from
nonprepared statements executed with `MySQLCursor', which can use the
`format' or `pyformat' parameterization style.

To use multiple prepared statements simultaneously, instantiate
multiple cursors from the `MySQLCursorPrepared' class.

The `MySQLCursorPrepared' class is available as of Connector/Python
1.1.0.


File: manual.info,  Node: connector-python-api-clientflag,  Next: connector-python-api-fieldtype,  Prev: connector-python-api-mysqlcursorprepared,  Up: connector-python-reference

22.6.8.83 Class `constants.ClientFlag'
......................................

This class provides constants defining MySQL client flags that can be
used when the connection is established to configure the session. The
`ClientFlag' class is available when importing `mysql.connector'.


     >>> import mysql.connector
     >>> mysql.connector.ClientFlag.FOUND_ROWS
     2

See *Note connector-python-api-mysqlconnection-set-client-flags:: and
the *Note connection argument: connector-python-connectargs.
`client_flag'.

The `ClientFlag' class cannot be instantiated.


File: manual.info,  Node: connector-python-api-fieldtype,  Next: connector-python-api-sqlmode,  Prev: connector-python-api-clientflag,  Up: connector-python-reference

22.6.8.84 Class `constants.FieldType'
.....................................

This class provides all supported MySQL field or data types. They can
be useful when dealing with raw data or defining your own converters.
The field type is stored with every cursor in the description for each
column.

The following example shows how to print the name of the data type for
each column in a result set.

     from __future__ import print_function
     import mysql.connector
     from mysql.connector import FieldType

     cnx = mysql.connector.connect(user='scott', database='test')
     cursor = cnx.cursor()

     cursor.execute(
       "SELECT DATE(NOW()) AS `c1`, TIME(NOW()) AS `c2`, "
       "NOW() AS `c3`, 'a string' AS `c4`, 42 AS `c5`")
     rows = cursor.fetchall()

     for desc in cursor.description:
       colname = desc[0]
       coltype = desc[1]
       print("Column {} has type {}".format(
         colname, FieldType.get_info(coltype)))

     cursor.close()
     cnx.close()

The `FieldType' class cannot be instantiated.


File: manual.info,  Node: connector-python-api-sqlmode,  Next: connector-python-api-characterset,  Prev: connector-python-api-fieldtype,  Up: connector-python-reference

22.6.8.85 Class `constants.SQLMode'
...................................

This class provides all known MySQL *Note Server SQL Modes:
server-sql-mode. It is mostly used when setting the SQL modes at
connection time using the connection's `sql_mode' property. See *Note
connector-python-api-mysqlconnection-sql-mode::.

The `SQLMode' class cannot be instantiated.


File: manual.info,  Node: connector-python-api-characterset,  Next: connector-python-api-refreshoption,  Prev: connector-python-api-sqlmode,  Up: connector-python-reference

22.6.8.86 Class `constants.CharacterSet'
........................................

This class provides all known MySQL characters sets and their default
collations. For examples, see *Note
connector-python-api-mysqlconnection-set-charset-collation::.

The `CharacterSet' class cannot be instantiated.


File: manual.info,  Node: connector-python-api-refreshoption,  Next: connector-python-api-errors,  Prev: connector-python-api-characterset,  Up: connector-python-reference

22.6.8.87 Class `constants.RefreshOption'
.........................................

This class performs various flush operations.

   * `RefreshOption.GRANT'

     Refresh the grant tables, like *Note `FLUSH PRIVILEGES': flush.

   * `RefreshOption.LOG'

     Flush the logs, like *Note `FLUSH LOGS': flush.

   * `RefreshOption.TABLES'

     Flush the table cache, like *Note `FLUSH TABLES': flush.

   * `RefreshOption.HOSTS'

     Flush the host cache, like *Note `FLUSH HOSTS': flush.

   * `RefreshOption.STATUS'

     Reset status variables, like *Note `FLUSH STATUS': flush.

   * `RefreshOption.THREADS'

     Flush the thread cache.

   * `RefreshOption.SLAVE'

     On a slave replication server, reset the master server information
     and restart the slave, like *Note `RESET SLAVE': reset-slave.

   * `RefreshOption.MASTER'

     On a master replication server, remove the binary log files listed
     in the binary log index and truncate the index file, like *Note
     `RESET MASTER': reset-master.


File: manual.info,  Node: connector-python-api-errors,  Prev: connector-python-api-refreshoption,  Up: connector-python-reference

22.6.8.88 Errors and Exceptions
...............................

* Menu:

* connector-python-api-errorcode::  Module `errorcode'
* connector-python-api-errors-error::  Exception `errors.Error'
* connector-python-api-errors-dataerror::  Exception `errors.DataError'
* connector-python-api-errors-databaseerror::  Exception `errors.DatabaseError'
* connector-python-api-errors-integrityerror::  Exception `errors.IntegrityError'
* connector-python-api-errors-interfaceerror::  Exception `errors.InterfaceError'
* connector-python-api-errors-internalerror::  Exception `errors.InternalError'
* connector-python-api-errors-notsupportederror::  Exception `errors.NotSupportedError'
* connector-python-api-errors-operationalerror::  Exception `errors.OperationalError'
* connector-python-api-errors-poolerror::  Exception `errors.PoolError'
* connector-python-api-errors-programmingerror::  Exception `errors.ProgrammingError'
* connector-python-api-errors-warning::  Exception `errors.Warning'
* connector-python-api-errors-custom-error-exception::  Function `errors.custom_error_exception(error=None, exception=None)'

The `mysql.connector.errors' module defines exception classes for
errors and warnings raised by MySQL Connector/Python. Most classes
defined in this module are available when you import `mysql.connector'.

The exception classes defined in this module mostly follow the Python
Database Specification v2.0 (PEP-249). For some MySQL client or server
errors it is not always clear which exception to raise. It is good to
discuss whether an error should be reclassified by opening a bug report.

MySQL Server errors are mapped with Python exception based on their
SQLSTATE value (see *Note error-messages-server::). The following table
shows the SQLSTATE classes and the exception Connector/Python raises.
It is, however, possible to redefine which exception is raised for each
server error. Note that the default exception is `DatabaseError'.

**

SQLSTATE Class                Connector/Python Exception
`02'                          `DataError'
`02'                          `DataError'
`07'                          `DatabaseError'
`08'                          `OperationalError'
`0A'                          `NotSupportedError'
`21'                          `DataError'
`22'                          `DataError'
`23'                          `IntegrityError'
`24'                          `ProgrammingError'
`25'                          `ProgrammingError'
`26'                          `ProgrammingError'
`27'                          `ProgrammingError'
`28'                          `ProgrammingError'
`2A'                          `ProgrammingError'
`2B'                          `DatabaseError'
`2C'                          `ProgrammingError'
`2D'                          `DatabaseError'
`2E'                          `DatabaseError'
`33'                          `DatabaseError'
`34'                          `ProgrammingError'
`35'                          `ProgrammingError'
`37'                          `ProgrammingError'
`3C'                          `ProgrammingError'
`3D'                          `ProgrammingError'
`3F'                          `ProgrammingError'
`40'                          `InternalError'
`42'                          `ProgrammingError'
`44'                          `InternalError'
`HZ'                          `OperationalError'
`XA'                          `IntegrityError'
`0K'                          `OperationalError'
`HY'                          `DatabaseError'


File: manual.info,  Node: connector-python-api-errorcode,  Next: connector-python-api-errors-error,  Prev: connector-python-api-errors,  Up: connector-python-api-errors

22.6.8.89 Module `errorcode'
............................

This module contains both MySQL server and client error codes defined
as module attributes with the error number as value.  Using error codes
instead of error numbers could make reading the source code a bit
easier.


     >>> from mysql.connector import errorcode
     >>> errorcode.ER_BAD_TABLE_ERROR
     1051

See *Note error-messages-server:: and *Note error-messages-client::.


File: manual.info,  Node: connector-python-api-errors-error,  Next: connector-python-api-errors-dataerror,  Prev: connector-python-api-errorcode,  Up: connector-python-api-errors

22.6.8.90 Exception `errors.Error'
..................................

This exception is the base class for all other exceptions in the
`errors' module. It can be used to catch all errors in a single
`except' statement.

The following example shows how we could catch syntax errors:

     import mysql.connector
     try:
       cnx = mysql.connector.connect(user='scott', database='employees')
       cursor = cnx.cursor()
       cursor.execute("SELECT * FORM employees")   # Syntax error in query
       cnx.close()
     except mysql.connector.Error as err:
       print("Something went wrong: {}".format(err))

Initializing the exception supports a few optional arguments, namely
`msg', `errno', `values' and `sqlstate'. All of them are optional and
default to `None'.  `errors.Error' is internally used by
Connector/Python to raise MySQL client and server errors and should not
be used by your application to raise exceptions.

The following examples show the result when using no arguments or a
combination of the arguments:


     >>> from mysql.connector.errors import Error
     >>> str(Error())
     'Unknown error'

     >>> str(Error("Oops! There was an error."))
     'Oops! There was an error.'

     >>> str(Error(errno=2006))
     '2006: MySQL server has gone away'

     >>> str(Error(errno=2002, values=('/tmp/mysql.sock', 2)))
     "2002: Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)"

     >>> str(Error(errno=1146, sqlstate='42S02', msg="Table 'test.spam' doesn't exist"))
     "1146 (42S02): Table 'test.spam' doesn't exist"

The example which uses error number 1146 is used when Connector/Python
receives an error packet from the MySQL Server.  The information is
parsed and passed to the `Error' exception as shown.

Each exception subclassing from `Error' can be initialized using the
previously mentioned arguments.  Additionally, each instance has the
attributes `errno', `msg' and `sqlstate' which can be used in your code.

The following example shows how to handle errors when dropping a table
which does not exist (when the *Note `DROP TABLE': drop-table.
statement does not include a `IF EXISTS' clause):

     import mysql.connector
     from mysql.connector import errorcode

     cnx = mysql.connector.connect(user='scott', database='test')
     try:
       cur.execute("DROP TABLE spam")
     except mysql.connector.Error as err:
       if err.errno == errorcode.ER_BAD_TABLE_ERROR:
         print("Creating table spam")
       else:
         raise

`errors.Error' is a subclass of the Python `StandardError'.


File: manual.info,  Node: connector-python-api-errors-dataerror,  Next: connector-python-api-errors-databaseerror,  Prev: connector-python-api-errors-error,  Up: connector-python-api-errors

22.6.8.91 Exception `errors.DataError'
......................................

This exception is raised when there were problems with the data.
Examples are a column set to `NULL' that cannot be `NULL', out-of-range
values for a column, division by zero, column count does not match
value count, and so on.

`errors.DataError' is a subclass of `errors.DatabaseError'.


File: manual.info,  Node: connector-python-api-errors-databaseerror,  Next: connector-python-api-errors-integrityerror,  Prev: connector-python-api-errors-dataerror,  Up: connector-python-api-errors

22.6.8.92 Exception `errors.DatabaseError'
..........................................

This exception is the default for any MySQL error which does not fit
the other exceptions.

`errors.DatabaseError' is a subclass of `errors.Error'.


File: manual.info,  Node: connector-python-api-errors-integrityerror,  Next: connector-python-api-errors-interfaceerror,  Prev: connector-python-api-errors-databaseerror,  Up: connector-python-api-errors

22.6.8.93 Exception `errors.IntegrityError'
...........................................

This exception is raised when the relational integrity of the data is
affected. For example, a duplicate key was inserted or a foreign key
constraint would fail.

The following example shows a duplicate key error raised as
IntegrityError:

     cursor.execute("CREATE TABLE t1 (id int, PRIMARY KEY (id))")
     try:
       cursor.execute("INSERT INTO t1 (id) VALUES (1)")
       cursor.execute("INSERT INTO t1 (id) VALUES (1)")
     except mysql.connector.IntegrityError as err:
       print("Error: {}".format(err))

`errors.IntegrityError' is a subclass of `errors.DatabaseError'.


File: manual.info,  Node: connector-python-api-errors-interfaceerror,  Next: connector-python-api-errors-internalerror,  Prev: connector-python-api-errors-integrityerror,  Up: connector-python-api-errors

22.6.8.94 Exception `errors.InterfaceError'
...........................................

This exception is raised for errors originating from Connector/Python
itself, not related to the MySQL server.

`errors.InterfaceError' is a subclass of `errors.Error'.


File: manual.info,  Node: connector-python-api-errors-internalerror,  Next: connector-python-api-errors-notsupportederror,  Prev: connector-python-api-errors-interfaceerror,  Up: connector-python-api-errors

22.6.8.95 Exception `errors.InternalError'
..........................................

This exception is raised when the MySQL server encounters an internal
error, for example, when a deadlock occurred.

`errors.InternalError' is a subclass of `errors.DatabaseError'.


File: manual.info,  Node: connector-python-api-errors-notsupportederror,  Next: connector-python-api-errors-operationalerror,  Prev: connector-python-api-errors-internalerror,  Up: connector-python-api-errors

22.6.8.96 Exception `errors.NotSupportedError'
..............................................

This exception is raised when some feature was used that is not
supported by the version of MySQL that returned the error. It is also
raised when using functions or statements that are not supported by
stored routines.

`errors.NotSupportedError' is a subclass of `errors.DatabaseError'.


File: manual.info,  Node: connector-python-api-errors-operationalerror,  Next: connector-python-api-errors-poolerror,  Prev: connector-python-api-errors-notsupportederror,  Up: connector-python-api-errors

22.6.8.97 Exception `errors.OperationalError'
.............................................

This exception is raised for errors which are related to MySQL's
operations. For example: too many connections; a host name could not be
resolved; bad handshake; server is shutting down, communication errors.

`errors.OperationalError' is a subclass of `errors.DatabaseError'.


File: manual.info,  Node: connector-python-api-errors-poolerror,  Next: connector-python-api-errors-programmingerror,  Prev: connector-python-api-errors-operationalerror,  Up: connector-python-api-errors

22.6.8.98 Exception `errors.PoolError'
......................................

This exception is raised for connection pool errors.
`errors.PoolError' is a subclass of `errors.Error'.


File: manual.info,  Node: connector-python-api-errors-programmingerror,  Next: connector-python-api-errors-warning,  Prev: connector-python-api-errors-poolerror,  Up: connector-python-api-errors

22.6.8.99 Exception `errors.ProgrammingError'
.............................................

This exception is raised on programming errors, for example when you
have a syntax error in your SQL or a table was not found.

The following example shows how to handle syntax errors:

     try:
       cursor.execute("CREATE DESK t1 (id int, PRIMARY KEY (id))")
     except mysql.connector.ProgrammingError as err:
       if err.errno == errorcode.ER_SYNTAX_ERROR:
         print("Check your syntax!")
       else:
         print("Error: {}".format(err))

`errors.ProgrammingError' is a subclass of `errors.DatabaseError'.


File: manual.info,  Node: connector-python-api-errors-warning,  Next: connector-python-api-errors-custom-error-exception,  Prev: connector-python-api-errors-programmingerror,  Up: connector-python-api-errors

22.6.8.100 Exception `errors.Warning'
.....................................

This exception is used for reporting important warnings, however,
Connector/Python does not use it. It is included to be compliant with
the Python Database Specification v2.0 (PEP-249).

Consider using either more strict *Note Server SQL Modes:
server-sql-mode. or the *Note raise_on_warnings:
connector-python-connectargs.  connection argument to make
Connector/Python raise errors when your queries produce warnings.

`errors.Warning' is a subclass of the Python `StandardError'.


File: manual.info,  Node: connector-python-api-errors-custom-error-exception,  Prev: connector-python-api-errors-warning,  Up: connector-python-api-errors

22.6.8.101 Function `errors.custom_error_exception(error=None, exception=None)'
...............................................................................

This method defines custom exceptions for MySQL server errors and
returns current customizations.

If `error' is a MySQL Server error number, you must also pass the
`exception' class. The `error' argument can be a dictionary, in which
case the key is the server error number, and value the class of the
exception to be raised.

To reset the customizations, supply an empty dictionary.

     import mysql.connector
     from mysql.connector import errorcode

     # Server error 1028 should raise a DatabaseError
     mysql.connector.custom_error_exception(1028, mysql.connector.DatabaseError)

     # Or using a dictionary:
     mysql.connector.custom_error_exception({
       1028: mysql.connector.DatabaseError,
       1029: mysql.connector.OperationalError,
     })

     # To reset, pass an empty dictionary:
     mysql.connector.custom_error_exception({})


File: manual.info,  Node: libmysqld,  Next: c-api,  Prev: connector-python,  Up: connectors-apis

22.7 libmysqld, the Embedded MySQL Server Library
=================================================

* Menu:

* libmysqld-compiling::          Compiling Programs with `libmysqld'
* libmysqld-restrictions::       Restrictions When Using the Embedded MySQL Server
* libmysqld-options::            Options with the Embedded Server
* libmysqld-example::            Embedded Server Examples

The embedded MySQL server library makes it possible to run a
full-featured MySQL server inside a client application. The main
benefits are increased speed and more simple management for embedded
applications.

The embedded server library is based on the client/server version of
MySQL, which is written in C/C++. Consequently, the embedded server
also is written in C/C++. There is no embedded server available in
other languages.

The API is identical for the embedded MySQL version and the
client/server version. To change an old threaded application to use the
embedded library, you normally only have to add calls to the following
functions.

*MySQL Embedded Server Library Functions*

This table lists MySQL embedded server library functions and describes
when the functions should be called.

Function               When to Call
*Note                  Call it before any other MySQL function is called,
`mysql_library_init()':preferably early in the `main()' function.
mysql-library-init.    
*Note                  Call it before your program exits.
`mysql_library_end()': 
mysql-library-end.     
*Note                  Call it in each thread you create that accesses
`mysql_thread_init()': MySQL.
mysql-thread-init.     
*Note                  Call it before calling `pthread_exit()'.
`mysql_thread_end()':  
mysql-thread-end.      

Then you must link your code with `libmysqld.a' instead of
`libmysqlclient.a'. To ensure binary compatibility between your
application and the server library, be sure to compile your application
against headers for the same series of MySQL that was used to compile
the server library. For example, if `libmysqld' was compiled against
MySQL 4.1 headers, do not compile your application against MySQL 5.1
headers, or vice versa.

The `mysql_library_XXX()' functions are also included in
`libmysqlclient.a' to enable you to change between the embedded and the
client/server version by just linking your application with the right
library. See *Note mysql-library-init::.

One difference between the embedded server and the standalone server is
that for the embedded server, authentication for connections is
disabled by default. To use authentication for the embedded server,
define the `HAVE_EMBEDDED_PRIVILEGE_CONTROL' compiler flag when you
invoke `CMake' to configure your MySQL distribution. See *Note
source-configuration-options::.


File: manual.info,  Node: libmysqld-compiling,  Next: libmysqld-restrictions,  Prev: libmysqld,  Up: libmysqld

22.7.1 Compiling Programs with `libmysqld'
------------------------------------------

In precompiled binary MySQL distributions that include `libmysqld', the
embedded server library, MySQL builds the library using the appropriate
vendor compiler if there is one.

To get a `libmysqld' library if you build MySQL from source yourself,
you should configure MySQL with the `-DWITH_EMBEDDED_SERVER=1' option.
See *Note source-configuration-options::.

When you link your program with `libmysqld', you must also include the
system-specific `pthread' libraries and some libraries that the MySQL
server uses. You can get the full list of libraries by executing *Note
`mysql_config --libmysqld-libs': mysql-config.

The correct flags for compiling and linking a threaded program must be
used, even if you do not directly call any thread functions in your
code.

To compile a C program to include the necessary files to embed the
MySQL server library into an executable version of a program, the
compiler will need to know where to find various files and need
instructions on how to compile the program. The following example shows
how a program could be compiled from the command line, assuming that
you are using `gcc', use the GNU C compiler:

     gcc mysql_test.c -o mysql_test \
     `/usr/local/mysql/bin/mysql_config --include --libmysqld-libs`

Immediately following the `gcc' command is the name of the C program
source file. After it, the `-o' option is given to indicate that the
file name that follows is the name that the compiler is to give to the
output file, the compiled program. The next line of code tells the
compiler to obtain the location of the include files and libraries and
other settings for the system on which it is compiled. The *Note
`mysql_config': mysql-config. command is contained in backticks, not
single quotation marks.

On some non-`gcc' platforms, the embedded library depends on C++
runtime libraries and linking against the embedded library might result
in missing-symbol errors. To solve this, link using a C++ compiler or
explicitly list the required libraries on the link command line.


File: manual.info,  Node: libmysqld-restrictions,  Next: libmysqld-options,  Prev: libmysqld-compiling,  Up: libmysqld

22.7.2 Restrictions When Using the Embedded MySQL Server
--------------------------------------------------------

The embedded server has the following limitations:

   * No user-defined functions (UDFs).

   * No stack trace on core dump.

   * You cannot set this up as a master or a slave (no replication).

   * Very large result sets may be unusable on low memory systems.

   * You cannot connect to an embedded server from an outside process
     with sockets or TCP/IP. However, you can connect to an
     intermediate application, which in turn can connect to an embedded
     server on the behalf of a remote client or outside process.

   * `InnoDB' is not reentrant in the embedded server and cannot be
     used for multiple connections, either successively or
     simultaneously.

   * The Event Scheduler is not available. Because of this, the
     `event_scheduler' system variable is disabled.

Some of these limitations can be changed by editing the `mysql_embed.h'
include file and recompiling MySQL.


File: manual.info,  Node: libmysqld-options,  Next: libmysqld-example,  Prev: libmysqld-restrictions,  Up: libmysqld

22.7.3 Options with the Embedded Server
---------------------------------------

Any options that may be given with the *Note `mysqld': mysqld.  server
daemon, may be used with an embedded server library. Server options may
be given in an array as an argument to the *Note
`mysql_library_init()': mysql-library-init, which initializes the
server. They also may be given in an option file like `my.cnf'. To
specify an option file for a C program, use the `--defaults-file'
option as one of the elements of the second argument of the *Note
`mysql_library_init()': mysql-library-init. function. See *Note
mysql-library-init::, for more information on the *Note
`mysql_library_init()': mysql-library-init. function.

Using option files can make it easier to switch between a client/server
application and one where MySQL is embedded. Put common options under
the `[server]' group. These are read by both MySQL versions.
Client/server-specific options should go under the `[mysqld]' section.
Put options specific to the embedded MySQL server library in the
`[embedded]' section. Options specific to applications go under section
labeled `[ApplicationName_SERVER]'. See *Note option-files::.


File: manual.info,  Node: libmysqld-example,  Prev: libmysqld-options,  Up: libmysqld

22.7.4 Embedded Server Examples
-------------------------------

These two example programs should work without any changes on a Linux
or FreeBSD system. For other operating systems, minor changes are
needed, mostly with file paths. These examples are designed to give
enough details for you to understand the problem, without the clutter
that is a necessary part of a real application. The first example is
very straightforward. The second example is a little more advanced with
some error checking. The first is followed by a command-line entry for
compiling the program. The second is followed by a GNUmake file that
may be used for compiling instead.

*Example 1*

`test1_libmysqld.c'

     #include <stdio.h>
     #include <stdlib.h>
     #include <stdarg.h>
     #include "mysql.h"

     MYSQL *mysql;
     MYSQL_RES *results;
     MYSQL_ROW record;

     static char *server_options[] = \
            { "mysql_test", "--defaults-file=my.cnf", NULL };
     int num_elements = (sizeof(server_options) / sizeof(char *)) - 1;

     static char *server_groups[] = { "libmysqld_server",
                                      "libmysqld_client", NULL };

     int main(void)
     {
        mysql_library_init(num_elements, server_options, server_groups);
        mysql = mysql_init(NULL);
        mysql_options(mysql, MYSQL_READ_DEFAULT_GROUP, "libmysqld_client");
        mysql_options(mysql, MYSQL_OPT_USE_EMBEDDED_CONNECTION, NULL);

        mysql_real_connect(mysql, NULL,NULL,NULL, "database1", 0,NULL,0);

        mysql_query(mysql, "SELECT column1, column2 FROM table1");

        results = mysql_store_result(mysql);

        while((record = mysql_fetch_row(results))) {
           printf("%s - %s \n", record[0], record[1]);
        }

        mysql_free_result(results);
        mysql_close(mysql);
        mysql_library_end();

        return 0;
     }

Here is the command line for compiling the above program:

     gcc test1_libmysqld.c -o test1_libmysqld \
      `/usr/local/mysql/bin/mysql_config --include --libmysqld-libs`

*Example 2*

To try the example, create an `test2_libmysqld' directory at the same
level as the MySQL source directory. Save the `test2_libmysqld.c'
source and the `GNUmakefile' in the directory, and run GNU `make' from
inside the `test2_libmysqld' directory.

`test2_libmysqld.c'

     /*
      * A simple example client, using the embedded MySQL server library
     */

     #include <mysql.h>
     #include <stdarg.h>
     #include <stdio.h>
     #include <stdlib.h>

     MYSQL *db_connect(const char *dbname);
     void db_disconnect(MYSQL *db);
     void db_do_query(MYSQL *db, const char *query);

     const char *server_groups[] = {
       "test2_libmysqld_SERVER", "embedded", "server", NULL
     };

     int
     main(int argc, char **argv)
     {
       MYSQL *one, *two;

       /* mysql_library_init() must be called before any other mysql
        * functions.
        *
        * You can use mysql_library_init(0, NULL, NULL), and it
        * initializes the server using groups = {
        *   "server", "embedded", NULL
        *  }.
        *
        * In your $HOME/.my.cnf file, you probably want to put:

     [test2_libmysqld_SERVER]
     language = /path/to/source/of/mysql/sql/share/english

        * You could, of course, modify argc and argv before passing
        * them to this function.  Or you could create new ones in any
        * way you like.  But all of the arguments in argv (except for
        * argv[0], which is the program name) should be valid options
        * for the MySQL server.
        *
        * If you link this client against the normal mysqlclient
        * library, this function is just a stub that does nothing.
        */
       mysql_library_init(argc, argv, (char **)server_groups);

       one = db_connect("test");
       two = db_connect(NULL);

       db_do_query(one, "SHOW TABLE STATUS");
       db_do_query(two, "SHOW DATABASES");

       mysql_close(two);
       mysql_close(one);

       /* This must be called after all other mysql functions */
       mysql_library_end();

       exit(EXIT_SUCCESS);
     }

     static void
     die(MYSQL *db, char *fmt, ...)
     {
       va_list ap;
       va_start(ap, fmt);
       vfprintf(stderr, fmt, ap);
       va_end(ap);
       (void)putc('\n', stderr);
       if (db)
         db_disconnect(db);
       exit(EXIT_FAILURE);
     }

     MYSQL *
     db_connect(const char *dbname)
     {
       MYSQL *db = mysql_init(NULL);
       if (!db)
         die(db, "mysql_init failed: no memory");
       /*
        * Notice that the client and server use separate group names.
        * This is critical, because the server does not accept the
        * client's options, and vice versa.
        */
       mysql_options(db, MYSQL_READ_DEFAULT_GROUP, "test2_libmysqld_CLIENT");
       if (!mysql_real_connect(db, NULL, NULL, NULL, dbname, 0, NULL, 0))
         die(db, "mysql_real_connect failed: %s", mysql_error(db));

       return db;
     }

     void
     db_disconnect(MYSQL *db)
     {
       mysql_close(db);
     }

     void
     db_do_query(MYSQL *db, const char *query)
     {
       if (mysql_query(db, query) != 0)
         goto err;

       if (mysql_field_count(db) > 0)
       {
         MYSQL_RES   *res;
         MYSQL_ROW    row, end_row;
         int num_fields;

         if (!(res = mysql_store_result(db)))
           goto err;
         num_fields = mysql_num_fields(res);
         while ((row = mysql_fetch_row(res)))
         {
           (void)fputs(">> ", stdout);
           for (end_row = row + num_fields; row < end_row; ++row)
             (void)printf("%s\t", row ? (char*)*row : "NULL");
           (void)fputc('\n', stdout);
         }
         (void)fputc('\n', stdout);
         mysql_free_result(res);
       }
       else
         (void)printf("Affected rows: %lld\n", mysql_affected_rows(db));

       return;

     err:
       die(db, "db_do_query failed: %s [%s]", mysql_error(db), query);
     }

`GNUmakefile'

     # This assumes the MySQL software is installed in /usr/local/mysql
     inc      := /usr/local/mysql/include/mysql
     lib      := /usr/local/mysql/lib

     # If you have not installed the MySQL software yet, try this instead
     #inc      := $(HOME)/mysql-5.5/include
     #lib      := $(HOME)/mysql-5.5/libmysqld

     CC       := gcc
     CPPFLAGS := -I$(inc) -D_THREAD_SAFE -D_REENTRANT
     CFLAGS   := -g -W -Wall
     LDFLAGS  := -static
     # You can change -lmysqld to -lmysqlclient to use the
     # client/server library
     LDLIBS    = -L$(lib) -lmysqld -lm -ldl -lcrypt

     ifneq (,$(shell grep FreeBSD /COPYRIGHT 2>/dev/null))
     # FreeBSD
     LDFLAGS += -pthread
     else
     # Assume Linux
     LDLIBS += -lpthread
     endif

     # This works for simple one-file test programs
     sources := $(wildcard *.c)
     objects := $(patsubst %c,%o,$(sources))
     targets := $(basename $(sources))

     all: $(targets)

     clean:
             rm -f $(targets) $(objects) *.core


File: manual.info,  Node: c-api,  Next: apis-php,  Prev: libmysqld,  Up: connectors-apis

22.8 MySQL C API
================

* Menu:

* c-api-implementations::        MySQL C API Implementations
* c-api-multiple-installations::  Simultaneous MySQL Server and MySQL Connector/C Installations
* c-api-example-programs::       Example C API Client Programs
* c-api-building-running-clients::  Building and Running C API Client Programs
* c-api-data-structures::        C API Data Structures
* c-api-function-overview::      C API Function Overview
* c-api-functions::              C API Function Descriptions
* c-api-prepared-statements::    C API Prepared Statements
* c-api-prepared-statement-data-structures::  C API Prepared Statement Data Structures
* c-api-prepared-statement-function-overview::  C API Prepared Statement Function Overview
* c-api-prepared-statement-functions::  C API Prepared Statement Function Descriptions
* c-api-thread-functions::       C API Threaded Function Descriptions
* c-api-embedded-server-functions::  C API Embedded Server Function Descriptions
* c-api-plugin-functions::       C API Client Plugin Functions
* c-api-problems::               Common Questions and Problems When Using the C API
* auto-reconnect::               Controlling Automatic Reconnection Behavior
* c-api-multiple-queries::       C API Support for Multiple Statement Execution
* c-api-prepared-statement-problems::  C API Prepared Statement Problems
* c-api-prepared-statement-date-handling::  C API Prepared Statement Handling of Date and Time Values
* c-api-prepared-call-statements::  C API Support for Prepared `CALL' Statements

The C API provides low-level access to the MySQL client/server protocol
and enables C programs to access database contents. The C API code is
distributed with MySQL and implemented in the `libmysqlclient' library
See *Note c-api-implementations::.

Most other client APIs use the `libmysqlclient' library to communicate
with the MySQL server. (Exceptions are except Connector/J and
Connector/Net.) This means that, for example, you can take advantage of
many of the same environment variables that are used by other client
programs because they are referenced from the library. For a list of
these variables, see *Note programs-overview::.

For instructions on building client programs using the C API, see *Note
c-api-building-clients::. For programming with threads, see *Note
c-api-threaded-clients::. To create a standalone application which
includes the "server" and "client" in the same program (and does not
communicate with an external MySQL server), see *Note libmysqld::.

*Note*:

If, after an upgrade, you experience problems with compiled client
programs, such as `Commands out of sync' or unexpected core dumps, the
programs were probably compiled using old header or library files. In
this case, check the date of the `mysql.h' file and `libmysqlclient.a'
library used for compilation to verify that they are from the new MySQL
distribution. If not, recompile the programs with the new headers and
libraries.  Recompilation might also be necessary for programs compiled
against the shared client library if the library major version number
has changed (for example, from `libmysqlclient.so.17' to
`libmysqlclient.so.18'). For additional compatibility information, see
*Note c-api-running-clients::.

Clients have a maximum communication buffer size. The size of the
buffer that is allocated initially (16KB) is automatically increased up
to the maximum size (16MB by default). Because buffer sizes are
increased only as demand warrants, simply increasing the maximum limit
does not in itself cause more resources to be used. This size check is
mostly a precaution against erroneous statements and communication
packets.

The communication buffer must be large enough to contain a single SQL
statement (for client-to-server traffic) and one row of returned data
(for server-to-client traffic). Each session's communication buffer is
dynamically enlarged to handle any query or row up to the maximum
limit. For example, if you have *Note `BLOB': blob. values that contain
up to 16MB of data, you must have a communication buffer limit of at
least 16MB (in both server and client). The default maximum built into
the client library is 1GB, but the default maximum in the server is 1MB.
You can increase this by changing the value of the `max_allowed_packet'
parameter at server startup. See *Note server-parameters::.

The MySQL server shrinks each communication buffer to
`net_buffer_length' bytes after each query. For clients, the size of
the buffer associated with a connection is not decreased until the
connection is closed, at which time client memory is reclaimed.


File: manual.info,  Node: c-api-implementations,  Next: c-api-multiple-installations,  Prev: c-api,  Up: c-api

22.8.1 MySQL C API Implementations
----------------------------------

The MySQL C API is a C-based API that client applications written in C
can use to communicate with MySQL Server. Client programs refer to C
API header files at compile time and link to a C API library file at
link time. The library comes in two versions, depending on how the
application is intended to communicate with the server:

   * `libmysqlclient': The client version of the library, used for
     applications that communicate over a network connection as a
     client of a standalone server process.

   * `libmysqld': The embedded server version of the library, used for
     applications intended to include an embedded MySQL server within
     the application itself. The application communicates with its own
     private server instance.

Both libraries have the same interface. In terms of C API calls, an
application communicates with a standalone server the same way it
communicates with an embedded server. A given client can be built to
communicate with a standalone or embedded server, depending on whether
it is linked against `libmysqlclient' or `libmysqld' at build time.

There are two ways to obtain the C API header and library files
required to build C API client programs:

   * Install a MySQL Server distribution. Server distributions include
     both `libmysqlclient' and `libmysqld'.

   * Install a MySQL Connector/C distribution. Connector/C
     distributions include only `libmysqlclient'. They do not include
     `libmysqld'.

For both MySQL Server and MySQL Connector/C, you can install a binary
distribution that contains the C API files pre-built, or you can use a
source distribution and build the C API files yourself.

Normally, you install either a MySQL Server distribution or a MySQL
Connector/C distribution, but not both. For information about issues
involved with simultaneous MySQL Server and MySQL Connector/C
installations, see *Note c-api-multiple-installations::.

The names of the library files to use when linking C API client
applications depend on the library type and platform for which a
distribution is built:

   * On Unix (and Unix-like) sytems, the static library is
     `libmysqlclient.a'. The dynamic library is `libmysqlclient.so' on
     most Unix systems and `libmysqlclient.dylib' on Mac OS X.

     For distributions that include embedded server libraries, the
     corresponding library names begin with `libmysqld' rather than
     `libmysqlclient'.

   * On Windows, the static library is `mysqlclient.lib' and the
     dynamic library is `libmysql.dll'. Windows distributions also
     include `libmysql.lib', a static import library needed for using
     the dynamic library.

     For distributions that include embedded server libraries, the
     corresponding library names are `mysqlserver.lib',
     `libmysqld.dll', and `libmysqld.lib'.

     Windows distributions also include a set of debug libraries.
     These have the same names as the nondebug libraries, but are
     located in the `lib/debug' library. You must use the debug
     libraries when compiling clients built using the debug C runtime.

On Unix, you may also see libraries that include `_r' in the names.
Before MySQL 5.5, these were built as thread-safe (re-entrant)
libraries separately from the non-`_r' libraries. As of 5.5, both
libraries are the same and the `_r' names are symbolic links to the
corresponding non-`_r' names. There is no need to use the `_r'
libraries. For example, if you use *Note `mysql_config': mysql-config.
to obtain linker flags, you can use *Note `mysql_config --libs':
mysql-config. in all cases, even for threaded clients. There is no need
to use *Note `mysql_config --libs_r': mysql-config.


File: manual.info,  Node: c-api-multiple-installations,  Next: c-api-example-programs,  Prev: c-api-implementations,  Up: c-api

22.8.2 Simultaneous MySQL Server and MySQL Connector/C Installations
--------------------------------------------------------------------

MySQL Server and MySQL Connector/C installation packages both provide
the files needed to build and run MySQL C API client programs. This
section discusses when it is possible to install both products on the
same system. For some packaging formats, this is possible without
conflict. For others, both products cannot be installed at the same
time.

This discussion assumes the use of similar package types for both
products (for example, RPM packages for both products). It does not try
to describe coexistence between packaging types (for example, use of
RPM packages for one product and a `tar' file package for the other).
Nor does it describe coexistence of packages provided by Oracle and
those provided by third-party vendors.

If you install both products, it may be necessary to adjust your
development tools or runtime environment to choose one set of header
files and libraries over the other. See *Note c-api-building-clients::,
and *Note c-api-running-clients::.

`tar' and Zip file packages install under the directory into which you
unpack them. For example, you can unpack MySQL Server and MySQL
Connector/C `tar' packages under `/usr/local' and they will unpack into
distinct directory names without conflict.

Windows MSI installers use their own installation directory, so MySQL
Server and MySQL Connector/C installers do not conflict.

Mac OS X DMG packages install under the same parent directory but in a
different subdirectory, so there is no conflict. For example:

     /usr/local/mysql-5.6.11-osx10.7-x86_64/
     /usr/local/mysql-connector-c-6.1.0-osx10.7-x86/

Solaris PKG packages install under the same parent directory but in a
different subdirectory, so there is no conflict. For example:

     /opt/mysql/mysql
     /opt/mysql/connector-c

The Solaris MySQL Connector/C installer does not create any symlinks
from system directories such as `/usr/bin' or `/usr/lib' into the
installation directory.  That must be done manually if desired after
installation.

For RPM installations, there are several types of RPM packages.  MySQL
Server `shared' and `devel' RPM packages are similar to the
corresponding MySQL Connector/C RPM packages. These RPM package types
cannot coexist because the MySQL Server and MySQL Connector/C RPM
packages use the same installation locations for the client
library-related files.  This means the following conditions hold:

   * If MySQL Server `shared' and `devel' RPM packages are installed,
     they provide the C API headers and libraries, and there is no need
     to install the MySQL Connector/C RPM packages. To install the
     MySQL Connector/C packages anyway, you must first remove the
     corresponding MySQL Server packages.

   * To install MySQL Server RPM packages if you already have MySQL
     Connector/C RPM packages installed, you must first remove the
     MySQL Connector/C RPM packages.

MySQL Server RPM packages other than `shared' and `devel' do not
conflict with MySQL Connector/C packages and can be installed if MySQL
Connector/C is installed. This includes the main server RPM that
includes the *Note `mysqld': mysqld. server itself.


File: manual.info,  Node: c-api-example-programs,  Next: c-api-building-running-clients,  Prev: c-api-multiple-installations,  Up: c-api

22.8.3 Example C API Client Programs
------------------------------------

Many of the clients in MySQL source distributions are written in C,
such as *Note `mysql': mysql, *Note `mysqladmin': mysqladmin, and *Note
`mysqlshow': mysqlshow.  If you are looking for examples that
demonstrate how to use the C API, take a look at these clients: Obtain
a source distribution and look in its `client' directory. See *Note
getting-mysql::.


File: manual.info,  Node: c-api-building-running-clients,  Next: c-api-data-structures,  Prev: c-api-example-programs,  Up: c-api

22.8.4 Building and Running C API Client Programs
-------------------------------------------------

* Menu:

* c-api-building-clients::       Building C API Client Programs
* c-api-threaded-clients::       Writing C API Threaded Client Programs
* c-api-running-clients::        Running C API Client Programs

The following sections provide information on building client programs
that use the C API. Topics include compiling and linking clients,
writing threaded clients, and troubleshooting runtime problems.


File: manual.info,  Node: c-api-building-clients,  Next: c-api-threaded-clients,  Prev: c-api-building-running-clients,  Up: c-api-building-running-clients

22.8.4.1 Building C API Client Programs
.......................................

This section provides guidelines for compiling C programs that use the
MySQL C API.

* Compiling MySQL Clients on Unix *

You may need to specify an `-I' option when you compile client programs
that use MySQL header files, so that the compiler can find them. For
example, if the header files are installed in
`/usr/local/mysql/include', use this option in the compile command:

     -I/usr/local/mysql/include

MySQL clients must be linked using the `-lmysqlclient' option in the
link command. You may also need to specify a `-L' option to tell the
linker where to find the library. For example, if the library is
installed in `/usr/local/mysql/lib', use these options in the link
command:

     -L/usr/local/mysql/lib -lmysqlclient

The path names may differ on your system. Adjust the `-I' and `-L'
options as necessary.

To make it simpler to compile MySQL programs on Unix, use the *Note
`mysql_config': mysql-config. script. See *Note mysql-config::.

*Note `mysql_config': mysql-config. displays the options needed for
compiling or linking:

     shell> mysql_config --cflags
     shell> mysql_config --libs

You can run those commands to get the proper options and add them
manually to compilation or link commands. Alternatively, include the
output from *Note `mysql_config': mysql-config. directly within command
lines using backticks:

     shell> gcc -c `mysql_config --cflags` progname.c
     shell> gcc -o progname progname.o `mysql_config --libs`

* Compiling MySQL Clients on Microsoft Windows *

To specify header and library file locations, use the facilities
provided by your development environment.

To build C API clients on Windows, you must link in the C client
library, as well as the Windows ws2_32 sockets library and Secur32
security library.

On Windows, you can link your code with either the dynamic or static C
client library. The static library is named `mysqlclient.lib' and the
dynamic library is named `libmysql.dll'. In addition, the
`libmysql.lib' static import library is needed for using the dynamic
library.

If you link with the static library, failure can occur unless these
conditions are satisfied:

   * The client application must be compiled with the same version of
     Visual Studio used to compile the library.

   * The client application should link the C runtime statically by
     using the `/MT' compiler option.

If the client application is built in in debug mode and uses the static
debug C runtime (`/MTd' compiler option), it can link to the
`mysqlclient.lib' static library if that library was built using the
same option.  If the client application uses the dynamic C runtime
(`/MD' option, or `/MDd' option in debug mode), it must must be linked
to the `libmysql.dll' dynamic library. It cannot link to the static
client library.

The MSDN page describing the link options can be found here:
`http://msdn.microsoft.com/en-us/library/2kzt1wy3.aspx'

* Troubleshooting Problems Linking to the MySQL Client Library *

If the linker cannot find the MySQL client library, you might get
undefined-reference errors for symbols that start with `mysql_', such
as those shown here:

     /tmp/ccFKsdPa.o: In function `main':
     /tmp/ccFKsdPa.o(.text+0xb): undefined reference to `mysql_init'
     /tmp/ccFKsdPa.o(.text+0x31): undefined reference to `mysql_real_connect'
     /tmp/ccFKsdPa.o(.text+0x69): undefined reference to `mysql_error'
     /tmp/ccFKsdPa.o(.text+0x9a): undefined reference to `mysql_close'

You should be able to solve this problem by adding `-LDIR_PATH
-lmysqlclient' at the end of your link command, where DIR_PATH
represents the path name of the directory where the client library is
located. To determine the correct directory, try this command:

     shell> mysql_config --libs

The output from *Note `mysql_config': mysql-config. might indicate
other libraries that should be specified on the link command as well.
You can include *Note `mysql_config': mysql-config. output directly in
your compile or link command using backticks. For example:

     shell> gcc -o progname progname.o `mysql_config --libs`

If an error occurs at link time that the `floor' symbol is undefined,
link to the math library by adding `-lm' to the end of the compile/link
line. Similarly, if you get undefined-reference errors for other
functions that should exist on your system, such as `connect()', check
the manual page for the function in question to determine which
libraries you should add to the link command.

If you get undefined-reference errors such as the following for
functions that don't exist on your system, it usually means that your
MySQL client library was compiled on a system that is not 100%
compatible with yours:

     mf_format.o(.text+0x201): undefined reference to `__lxstat'

In this case, you should download the latest MySQL or MySQL Connector/C
source distribution and compile the MySQL client library yourself. See
*Note source-installation::, and *Note connector-c::.


File: manual.info,  Node: c-api-threaded-clients,  Next: c-api-running-clients,  Prev: c-api-building-clients,  Up: c-api-building-running-clients

22.8.4.2 Writing C API Threaded Client Programs
...............................................

The client library is almost thread-safe. The biggest problem is that
the subroutines in `net.c' that read from sockets are not
interrupt-safe. This was done with the thought that you might want to
have your own alarm that can break a long read to a server. If you
install interrupt handlers for the `SIGPIPE' interrupt, socket handling
should be thread-safe.

To avoid aborting the program when a connection terminates, MySQL
blocks `SIGPIPE' on the first call to *Note `mysql_library_init()':
mysql-library-init, *Note `mysql_init()': mysql-init, or *Note
`mysql_connect()': mysql-connect. To use your own `SIGPIPE' handler,
first call *Note `mysql_library_init()': mysql-library-init, then
install your handler.

If `undefined symbol' errors occur when linking against the
`libmysqlclient' client library, in most cases this is because you have
not included the thread libraries on the link/compile command.

The client library is thread-safe per connection. You can let two
threads share the same connection with the following caveats:

   * Multiple threads cannot send a query to the MySQL server at the
     same time on the same connection. In particular, you must ensure
     that between calls to *Note `mysql_query()': mysql-query. and
     *Note `mysql_store_result()': mysql-store-result. in one thread,
     no other thread uses the same connection. You must have a mutex
     lock around your pair of *Note `mysql_query()': mysql-query. and
     *Note `mysql_store_result()': mysql-store-result. calls.  After
     *Note `mysql_store_result()': mysql-store-result.  returns, the
     lock can be released and other threads may query the same
     connection.

     If you use POSIX threads, you can use `pthread_mutex_lock()' and
     `pthread_mutex_unlock()' to establish and release a mutex lock.

   * Many threads can access different result sets that are retrieved
     with *Note `mysql_store_result()': mysql-store-result.

   * To use *Note `mysql_use_result()': mysql-use-result, you must
     ensure that no other thread is using the same connection until the
     result set is closed. However, it really is best for threaded
     clients that share the same connection to use *Note
     `mysql_store_result()': mysql-store-result.

You need to know the following if you have a thread that did not create
the connection to the MySQL database but is calling MySQL functions:

When you call *Note `mysql_init()': mysql-init, MySQL creates a
thread-specific variable for the thread that is used by the debug
library (among other things). If you call a MySQL function before the
thread has called *Note `mysql_init()': mysql-init, the thread does not
have the necessary thread-specific variables in place and you are
likely to end up with a core dump sooner or later. To avoid problems,
you must do the following:

  1. Call *Note `mysql_library_init()': mysql-library-init.  before any
     other MySQL functions. It is not thread-safe, so call it before
     threads are created, or protect the call with a mutex.

  2. Arrange for *Note `mysql_thread_init()': mysql-thread-init. to be
     called early in the thread handler before calling any MySQL
     function. If you call *Note `mysql_init()': mysql-init, it will
     call *Note `mysql_thread_init()': mysql-thread-init. for you.

  3. In the thread, call *Note `mysql_thread_end()': mysql-thread-end.
     before calling `pthread_exit()'. This frees the memory used by
     MySQL thread-specific variables.

The preceding notes regarding *Note `mysql_init()': mysql-init. also
apply to *Note `mysql_connect()': mysql-connect, which calls *Note
`mysql_init()': mysql-init.


File: manual.info,  Node: c-api-running-clients,  Prev: c-api-threaded-clients,  Up: c-api-building-running-clients

22.8.4.3 Running C API Client Programs
......................................

If, after an upgrade, you experience problems with compiled client
programs, such as `Commands out of sync' or unexpected core dumps, the
programs were probably compiled using old header or library files. In
this case, check the date of the `mysql.h' file and `libmysqlclient.a'
library used for compilation to verify that they are from the new MySQL
distribution. If not, recompile the programs with the new headers and
libraries. Recompilation might also be necessary for programs compiled
against the shared client library if the library major version number
has changed (for example, from `libmysqlclient.so.17' to
`libmysqlclient.so.18').

The major client library version determines compatibility. (For
example, for `libmysqlclient.so.18.1.0', the major version is 18.) For
this reason, the libraries shipped with newer versions of MySQL are
drop-in replacements for older versions that have the same major
number. As long as the major library version is the same, you can
upgrade the library and old applications should continue to work with
it.

Undefined-reference errors might occur at runtime when you try to
execute a MySQL program. If these errors specify symbols that start
with `mysql_' or indicate that the `libmysqlclient' library cannot be
found, it means that your system cannot find the shared
`libmysqlclient.so' library. The solution to this problem is to tell
your system to search for shared libraries in the directory where that
library is located. Use whichever of the following methods is
appropriate for your system:

   * Add the path of the directory where `libmysqlclient.so' is located
     to the `LD_LIBRARY_PATH' or `LD_LIBRARY' environment variable.

   * On Mac OS X, add the path of the directory where
     `libmysqlclient.dylib' is located to the `DYLD_LIBRARY_PATH'
     environment variable.

   * Copy the shared-library files (such as `libmysqlclient.so') to
     some directory that is searched by your system, such as `/lib',
     and update the shared library information by executing `ldconfig'.
     Be sure to copy all related files. A shared library might exist
     under several names, using symlinks to provide the alternate names.

If the application is linked to the embedded server library, runtime
error messages will indicate the `libmysqld' rather than
`libmysqlclient' library, but the solution to the problem is the same
as just described.


File: manual.info,  Node: c-api-data-structures,  Next: c-api-function-overview,  Prev: c-api-building-running-clients,  Up: c-api

22.8.5 C API Data Structures
----------------------------

This section describes C API data structures other than those used for
prepared statements. For information about the latter, see *Note
c-api-prepared-statement-data-structures::.

   * `MYSQL'

     This structure represents a handle to one database connection.  It
     is used for almost all MySQL functions. Do not try to make a copy
     of a `MYSQL' structure. There is no guarantee that such a copy
     will be usable.

   * `MYSQL_RES'

     This structure represents the result of a query that returns rows
     (*Note `SELECT': select, *Note `SHOW': show, *Note `DESCRIBE':
     describe, *Note `EXPLAIN': explain.). The information returned
     from a query is called the _result set_ in the remainder of this
     section.

   * `MYSQL_ROW'

     This is a type-safe representation of one row of data. It is
     currently implemented as an array of counted byte strings.  (You
     cannot treat these as null-terminated strings if field values may
     contain binary data, because such values may contain null bytes
     internally.) Rows are obtained by calling *Note
     `mysql_fetch_row()': mysql-fetch-row.

   * `MYSQL_FIELD'

     This structure contains metadata: information about a field, such
     as the field's name, type, and size. Its members are described in
     more detail later in this section. You may obtain the
     `MYSQL_FIELD' structures for each field by calling *Note
     `mysql_fetch_field()': mysql-fetch-field.  repeatedly. Field
     values are not part of this structure; they are contained in a
     `MYSQL_ROW' structure.

   * `MYSQL_FIELD_OFFSET'

     This is a type-safe representation of an offset into a MySQL field
     list. (Used by *Note `mysql_field_seek()': mysql-field-seek.)
     Offsets are field numbers within a row, beginning at zero.

   * `my_ulonglong'

     The type used for the number of rows and for *Note
     `mysql_affected_rows()': mysql-affected-rows, *Note
     `mysql_num_rows()': mysql-num-rows, and *Note `mysql_insert_id()':
     mysql-insert-id. This type provides a range of `0' to `1.84e19'.

     On some systems, attempting to print a value of type
     `my_ulonglong' does not work. To print such a value, convert it to
     `unsigned long' and use a `%lu' print format. Example:

          printf ("Number of rows: %lu\n",
                  (unsigned long) mysql_num_rows(result));

   * `my_bool'

     A boolean type, for values that are true (nonzero) or false (zero).

The `MYSQL_FIELD' structure contains the members described in the
following list. The definitions apply primarily for columns of result
sets such as those produced by *Note `SELECT': select. statements. As
of MySQL 5.5.3, `MYSQL_FIELD' structures are also used to provide
metadata for `OUT' and `INOUT' parameters returned from stored
procedures executed using prepared *Note `CALL': call. statements. For
such parameters, some of the structure members have a meaning different
from the meaning for column values.

   * `char * name'

     The name of the field, as a null-terminated string. If the field
     was given an alias with an `AS' clause, the value of `name' is the
     alias. For a procedure parameter, the parameter name.

   * `char * org_name'

     The name of the field, as a null-terminated string. Aliases are
     ignored. For expressions, the value is an empty string.  For a
     procedure parameter, the parameter name.

   * `char * table'

     The name of the table containing this field, if it isn't a
     calculated field. For calculated fields, the `table' value is an
     empty string. If the column is selected from a view, `table' names
     the view. If the table or view was given an alias with an `AS'
     clause, the value of `table' is the alias. For a *Note `UNION':
     union, the value is the empty string. For a procedure parameter,
     the procedure name.

   * `char * org_table'

     The name of the table, as a null-terminated string. Aliases are
     ignored. If the column is selected from a view, `org_table' names
     the view. For a *Note `UNION': union, the value is the empty
     string. For a procedure parameter, the procedure name.

   * `char * db'

     The name of the database that the field comes from, as a
     null-terminated string. If the field is a calculated field, `db'
     is an empty string. For a *Note `UNION': union, the value is the
     empty string. For a procedure parameter, the name of the database
     containing the procedure.

   * `char * catalog'

     The catalog name. This value is always `"def"'.

   * `char * def'

     The default value of this field, as a null-terminated string.
     This is set only if you use *Note `mysql_list_fields()':
     mysql-list-fields.

   * `unsigned long length'

     The width of the field. This corresponds to the display length, in
     bytes.

     The server determines the `length' value before it generates the
     result set, so this is the minimum length required for a data type
     capable of holding the largest possible value from the result
     column, without knowing in advance the actual values that will be
     produced by the query for the result set.

   * `unsigned long max_length'

     The maximum width of the field for the result set (the length in
     bytes of the longest field value for the rows actually in the
     result set). If you use *Note `mysql_store_result()':
     mysql-store-result. or *Note `mysql_list_fields()':
     mysql-list-fields, this contains the maximum length for the field.
     If you use *Note `mysql_use_result()': mysql-use-result, the value
     of this variable is zero.

     The value of `max_length' is the length of the string
     representation of the values in the result set. For example, if
     you retrieve a *Note `FLOAT': floating-point-types. column and the
     `widest' value is `-12.345', `max_length' is 7 (the length of
     `'-12.345'').

     If you are using prepared statements, `max_length' is not set by
     default because for the binary protocol the lengths of the values
     depend on the types of the values in the result set. (See *Note
     c-api-prepared-statement-data-structures::.)  If you want the
     `max_length' values anyway, enable the
     `STMT_ATTR_UPDATE_MAX_LENGTH' option with *Note
     `mysql_stmt_attr_set()': mysql-stmt-attr-set. and the lengths will
     be set when you call *Note `mysql_stmt_store_result()':
     mysql-stmt-store-result.  (See *Note mysql-stmt-attr-set::, and
     *Note mysql-stmt-store-result::.)

   * `unsigned int name_length'

     The length of `name'.

   * `unsigned int org_name_length'

     The length of `org_name'.

   * `unsigned int table_length'

     The length of `table'.

   * `unsigned int org_table_length'

     The length of `org_table'.

   * `unsigned int db_length'

     The length of `db'.

   * `unsigned int catalog_length'

     The length of `catalog'.

   * `unsigned int def_length'

     The length of `def'.

   * `unsigned int flags'

     Bit-flags that describe the field. The `flags' value may have zero
     or more of the bits set that are shown in the following table.

     This table lists bit-flag values and provides a description of
     each flag.

     Flag Value                  Flag Description
     `NOT_NULL_FLAG'             Field can't be `NULL'
     `PRI_KEY_FLAG'              Field is part of a primary key
     `UNIQUE_KEY_FLAG'           Field is part of a unique key
     `MULTIPLE_KEY_FLAG'         Field is part of a nonunique key
     `UNSIGNED_FLAG'             Field has the `UNSIGNED' attribute
     `ZEROFILL_FLAG'             Field has the `ZEROFILL' attribute
     `BINARY_FLAG'               Field has the `BINARY' attribute
     `AUTO_INCREMENT_FLAG'       Field has the `AUTO_INCREMENT' attribute
     `ENUM_FLAG'                 Field is an *Note `ENUM': enum.
     `SET_FLAG'                  Field is a *Note `SET': set.
     `BLOB_FLAG'                 Field is a *Note `BLOB': blob. or *Note
                                 `TEXT': blob. (deprecated)
     `TIMESTAMP_FLAG'            Field is a *Note `TIMESTAMP': datetime.
                                 (deprecated)
     `NUM_FLAG'                  Field is numeric; see additional notes
                                 following table
     `NO_DEFAULT_VALUE_FLAG'     Field has no default value; see
                                 additional notes following table

     Some of these flags indicate data type information and are
     superseded by or used in conjunction with the `MYSQL_TYPE_XXX'
     value in the `field->type' member described later:

        * To check for *Note `BLOB': blob. or *Note `TIMESTAMP':
          datetime. values, check whether `type' is `MYSQL_TYPE_BLOB' or
          `MYSQL_TYPE_TIMESTAMP'. (The `BLOB_FLAG' and `TIMESTAMP_FLAG'
          flags are unneeded.)

        * *Note `ENUM': enum. and *Note `SET': set. values are returned
          as strings. For these, check that the `type' value is
          `MYSQL_TYPE_STRING' and that the `ENUM_FLAG' or `SET_FLAG'
          flag is set in the `flags' value.

     `NUM_FLAG' indicates that a column is numeric. This includes
     columns with a type of `MYSQL_TYPE_DECIMAL',
     `MYSQL_TYPE_NEWDECIMAL', `MYSQL_TYPE_TINY', `MYSQL_TYPE_SHORT',
     `MYSQL_TYPE_LONG', `MYSQL_TYPE_FLOAT', `MYSQL_TYPE_DOUBLE',
     `MYSQL_TYPE_NULL', `MYSQL_TYPE_LONGLONG', `MYSQL_TYPE_INT24', and
     `MYSQL_TYPE_YEAR'.

     `NO_DEFAULT_VALUE_FLAG' indicates that a column has no `DEFAULT'
     clause in its definition. This does not apply to `NULL' columns
     (because such columns have a default of `NULL'), or to
     `AUTO_INCREMENT' columns (which have an implied default value).

     The following example illustrates a typical use of the `flags'
     value:

          if (field->flags & NOT_NULL_FLAG)
              printf("Field can't be null\n");

     You may use the convenience macros shown in the following table to
     determine the boolean status of the `flags' value.

     This table lists flag status values and provides a description of
     each.

     Flag Status                 Description
     `IS_NOT_NULL(flags)'        True if this field is defined as `NOT
                                 NULL'
     `IS_PRI_KEY(flags)'         True if this field is a primary key
     `IS_BLOB(flags)'            True if this field is a *Note `BLOB':
                                 blob. or *Note `TEXT': blob.
                                 (deprecated; test `field->type' instead)

   * `unsigned int decimals'

     The number of decimals for numeric fields.

   * `unsigned int charsetnr'

     An ID number that indicates the character set/collation pair for
     the field.

     Normally, character values in result sets are converted to the
     character set indicated by the `character_set_results' system
     variable. In this case, `charsetnr' corresponds to the character
     set indicated by that variable.  Character set conversion can be
     suppressed by setting `character_set_results' to `NULL'. In this
     case, `charsetnr' corresponds to the character set of the original
     table column or expression. See also *Note charset-connection::.

     To distinguish between binary and nonbinary data for string data
     types, check whether the `charsetnr' value is 63. If so, the
     character set is `binary', which indicates binary rather than
     nonbinary data. This enables you to distinguish *Note `BINARY':
     binary-varbinary. from *Note `CHAR': char, *Note `VARBINARY':
     binary-varbinary. from *Note `VARCHAR': char, and the *Note
     `BLOB': blob. types from the *Note `TEXT': blob. types.

     `charsetnr' values are the same as those displayed in the `Id'
     column of the *Note `SHOW COLLATION': show-collation. statement or
     the `ID' column of the `INFORMATION_SCHEMA' *Note `COLLATIONS':
     collations-table. table. You can use those information sources to
     see which character set and collation specific `charsetnr' values
     indicate:

          mysql> SHOW COLLATION WHERE Id = 63;
          +-----------+---------+----+---------+----------+---------+
          | Collation | Charset | Id | Default | Compiled | Sortlen |
          +-----------+---------+----+---------+----------+---------+
          | binary    | binary  | 63 | Yes     | Yes      |       1 |
          +-----------+---------+----+---------+----------+---------+

          mysql> SELECT COLLATION_NAME, CHARACTER_SET_NAME
              -> FROM INFORMATION_SCHEMA.COLLATIONS WHERE ID = 33;
          +-----------------+--------------------+
          | COLLATION_NAME  | CHARACTER_SET_NAME |
          +-----------------+--------------------+
          | utf8_general_ci | utf8               |
          +-----------------+--------------------+

   * `enum enum_field_types type'

     The type of the field. The `type' value may be one of the
     `MYSQL_TYPE_' symbols shown in the following table.

     This table lists `MYSQL_TYPE_' values and provides a description
     of each type.

     Type Value              Type Description
     `MYSQL_TYPE_TINY'       *Note `TINYINT': integer-types. field
     `MYSQL_TYPE_SHORT'      *Note `SMALLINT': integer-types. field
     `MYSQL_TYPE_LONG'       *Note `INTEGER': integer-types. field
     `MYSQL_TYPE_INT24'      *Note `MEDIUMINT': integer-types. field
     `MYSQL_TYPE_LONGLONG'   *Note `BIGINT': integer-types. field
     `MYSQL_TYPE_DECIMAL'    *Note `DECIMAL': fixed-point-types. or
                             *Note `NUMERIC': fixed-point-types. field
     `MYSQL_TYPE_NEWDECIMAL' Precision math *Note `DECIMAL':
                             fixed-point-types. or *Note `NUMERIC':
                             fixed-point-types.
     `MYSQL_TYPE_FLOAT'      *Note `FLOAT': floating-point-types. field
     `MYSQL_TYPE_DOUBLE'     *Note `DOUBLE': floating-point-types. or
                             *Note `REAL': floating-point-types. field
     `MYSQL_TYPE_BIT'        *Note `BIT': bit-type. field
     `MYSQL_TYPE_TIMESTAMP'  *Note `TIMESTAMP': datetime. field
     `MYSQL_TYPE_DATE'       *Note `DATE': datetime. field
     `MYSQL_TYPE_TIME'       *Note `TIME': time. field
     `MYSQL_TYPE_DATETIME'   *Note `DATETIME': datetime. field
     `MYSQL_TYPE_YEAR'       *Note `YEAR': year. field
     `MYSQL_TYPE_STRING'     *Note `CHAR': char. or *Note `BINARY':
                             binary-varbinary. field
     `MYSQL_TYPE_VAR_STRING' *Note `VARCHAR': char. or *Note
                             `VARBINARY': binary-varbinary. field
     `MYSQL_TYPE_BLOB'       *Note `BLOB': blob. or *Note `TEXT': blob.
                             field (use `max_length' to determine the
                             maximum length)
     `MYSQL_TYPE_SET'        *Note `SET': set. field
     `MYSQL_TYPE_ENUM'       *Note `ENUM': enum. field
     `MYSQL_TYPE_GEOMETRY'   Spatial field
     `MYSQL_TYPE_NULL'       `NULL'-type field

     You can use the `IS_NUM()' macro to test whether a field has a
     numeric type. Pass the `type' value to `IS_NUM()' and it evaluates
     to TRUE if the field is numeric:

          if (IS_NUM(field->type))
              printf("Field is numeric\n");

     *Note `ENUM': enum. and *Note `SET': set. values are returned as
     strings. For these, check that the `type' value is
     `MYSQL_TYPE_STRING' and that the `ENUM_FLAG' or `SET_FLAG' flag is
     set in the `flags' value.


File: manual.info,  Node: c-api-function-overview,  Next: c-api-functions,  Prev: c-api-data-structures,  Up: c-api

22.8.6 C API Function Overview
------------------------------

The functions available in the C API are summarized here and described
in greater detail in a later section. See *Note c-api-functions::.

*C API Function Names and Descriptions*

Function                Description
*Note `my_init()':      Initialize global variables, and thread handler
my-init.                in thread-safe programs
*Note                   Returns the number of rows
`mysql_affected_rows()':changed/deleted/inserted by the last *Note
mysql-affected-rows.    `UPDATE': update, *Note `DELETE': delete, or
                        *Note `INSERT': insert. query
*Note                   Toggles autocommit mode on/off
`mysql_autocommit()':   
mysql-autocommit.       
*Note                   Changes user and database on an open connection
`mysql_change_user()':  
mysql-change-user.      
*Note                   Return default character set name for current
`mysql_character_set_name()':connection
mysql-character-set-name.
*Note                   Return pointer to plugin
`mysql_client_find_plugin()':
mysql-client-find-plugin.
*Note                   Register a plugin
`mysql_client_register_plugin()':
mysql-client-register-plugin.
*Note `mysql_close()':  Closes a server connection
mysql-close.            
*Note                   Commits the transaction
`mysql_commit()':       
mysql-commit.           
*Note                   Connects to a MySQL server (this function is
`mysql_connect()':      deprecated; use *Note `mysql_real_connect()':
mysql-connect.          mysql-real-connect.  instead)
*Note                   Creates a database (this function is deprecated;
`mysql_create_db()':    use the SQL statement *Note `CREATE DATABASE':
mysql-create-db.        create-database. instead)
*Note                   Seeks to an arbitrary row number in a query
`mysql_data_seek()':    result set
mysql-data-seek.        
*Note `mysql_debug()':  Does a `DBUG_PUSH' with the given string
mysql-debug.            
*Note                   Drops a database (this function is deprecated;
`mysql_drop_db()':      use the SQL statement *Note `DROP DATABASE':
mysql-drop-db.          drop-database. instead)
*Note                   Makes the server write debug information to the
`mysql_dump_debug_info()':log
mysql-dump-debug-info.  
*Note `mysql_eof()':    Determines whether the last row of a result set
mysql-eof.              has been read (this function is deprecated;
                        *Note `mysql_errno()': mysql-errno. or *Note
                        `mysql_error()': mysql-error. may be used
                        instead)
*Note `mysql_errno()':  Returns the error number for the most recently
mysql-errno.            invoked MySQL function
*Note `mysql_error()':  Returns the error message for the most recently
mysql-error.            invoked MySQL function
*Note                   Escapes special characters in a string for use
`mysql_escape_string()':in an SQL statement
mysql-escape-string.    
*Note                   Returns the type of the next table field
`mysql_fetch_field()':  
mysql-fetch-field.      
*Note                   Returns the type of a table field, given a field
`mysql_fetch_field_direct()':number
mysql-fetch-field-direct.
*Note                   Returns an array of all field structures
`mysql_fetch_fields()': 
mysql-fetch-fields.     
*Note                   Returns the lengths of all columns in the
`mysql_fetch_lengths()':current row
mysql-fetch-lengths.    
*Note                   Fetches the next row from the result set
`mysql_fetch_row()':    
mysql-fetch-row.        
*Note                   Returns the number of result columns for the
`mysql_field_count()':  most recent statement
mysql-field-count.      
*Note                   Puts the column cursor on a specified column
`mysql_field_seek()':   
mysql-field-seek.       
*Note                   Returns the position of the field cursor used
`mysql_field_tell()':   for the last *Note `mysql_fetch_field()':
mysql-field-tell.       mysql-fetch-field.
*Note                   Frees memory used by a result set
`mysql_free_result()':  
mysql-free-result.      
*Note                   Return information about default character set
`mysql_get_character_set_info()':
mysql-get-character-set-info.
*Note                   Returns client version information as a string
`mysql_get_client_info()':
mysql-get-client-info.  
*Note                   Returns client version information as an integer
`mysql_get_client_version()':
mysql-get-client-version.
*Note                   Returns a string describing the connection
`mysql_get_host_info()':
mysql-get-host-info.    
*Note                   Returns the protocol version used by the
`mysql_get_proto_info()':connection
mysql-get-proto-info.   
*Note                   Returns the server version number
`mysql_get_server_info()':
mysql-get-server-info.  
*Note                   Returns version number of server as an integer
`mysql_get_server_version()':
mysql-get-server-version.
*Note                   Return current SSL cipher
`mysql_get_ssl_cipher()':
mysql-get-ssl-cipher.   
*Note                   Encode string in hexadecimal format
`mysql_hex_string()':   
mysql-hex-string.       
*Note `mysql_info()':   Returns information about the most recently
mysql-info.             executed query
*Note `mysql_init()':   Gets or initializes a `MYSQL' structure
mysql-init.             
*Note                   Returns the ID generated for an `AUTO_INCREMENT'
`mysql_insert_id()':    column by the previous query
mysql-insert-id.        
*Note `mysql_kill()':   Kills a given thread
mysql-kill.             
*Note                   Finalize the MySQL C API library
`mysql_library_end()':  
mysql-library-end.      
*Note                   Initialize the MySQL C API library
`mysql_library_init()': 
mysql-library-init.     
*Note                   Returns database names matching a simple regular
`mysql_list_dbs()':     expression
mysql-list-dbs.         
*Note                   Returns field names matching a simple regular
`mysql_list_fields()':  expression
mysql-list-fields.      
*Note                   Returns a list of the current server threads
`mysql_list_processes()':
mysql-list-processes.   
*Note                   Returns table names matching a simple regular
`mysql_list_tables()':  expression
mysql-list-tables.      
*Note                   Load a plugin
`mysql_load_plugin()':  
mysql-load-plugin.      
*Note                   Load a plugin
`mysql_load_plugin_v()':
mysql-load-plugin-v.    
*Note                   Checks whether any more results exist
`mysql_more_results()': 
mysql-more-results.     
*Note                   Returns/initiates the next result in
`mysql_next_result()':  multiple-result executions
mysql-next-result.      
*Note                   Returns the number of columns in a result set
`mysql_num_fields()':   
mysql-num-fields.       
*Note                   Returns the number of rows in a result set
`mysql_num_rows()':     
mysql-num-rows.         
*Note                   Sets connect options for *Note
`mysql_options()':      `mysql_real_connect()': mysql-real-connect.
mysql-options.          
*Note `mysql_ping()':   Checks whether the connection to the server is
mysql-ping.             working, reconnecting as necessary
*Note                   Set a plugin option
`mysql_plugin_options()':
mysql-plugin-options.   
*Note `mysql_query()':  Executes an SQL query specified as a
mysql-query.            null-terminated string
*Note                   Connects to a MySQL server
`mysql_real_connect()': 
mysql-real-connect.     
*Note                   Escapes special characters in a string for use
`mysql_real_escape_string()':in an SQL statement, taking into account the
mysql-real-escape-string.current character set of the connection
*Note                   Executes an SQL query specified as a counted
`mysql_real_query()':   string
mysql-real-query.       
*Note                   Flush or reset tables and caches
`mysql_refresh()':      
mysql-refresh.          
*Note                   Tells the server to reload the grant tables
`mysql_reload()':       
mysql-reload.           
*Note                   Rolls back the transaction
`mysql_rollback()':     
mysql-rollback.         
*Note                   Seeks to a row offset in a result set, using
`mysql_row_seek()':     value returned from *Note `mysql_row_tell()':
mysql-row-seek.         mysql-row-tell.
*Note                   Returns the row cursor position
`mysql_row_tell()':     
mysql-row-tell.         
*Note                   Selects a database
`mysql_select_db()':    
mysql-select-db.        
*Note                   Finalize the MySQL C API library
`mysql_server_end()':   
mysql-server-end.       
*Note                   Initialize the MySQL C API library
`mysql_server_init()':  
mysql-server-init.      
*Note                   Set default character set for current connection
`mysql_set_character_set()':
mysql-set-character-set.
*Note                   Set the *Note `LOAD DATA LOCAL INFILE':
`mysql_set_local_infile_default()':load-data. handler callbacks to their default
mysql-set-local-infile-default.values
*Note                   Install application-specific *Note `LOAD DATA
`mysql_set_local_infile_handler()':LOCAL INFILE': load-data. handler callbacks
mysql-set-local-infile-handler.
*Note                   Sets an option for the connection (like
`mysql_set_server_option()':`multi-statements')
mysql-set-server-option.
*Note                   Returns the SQLSTATE error code for the last
`mysql_sqlstate()':     error
mysql-sqlstate.         
*Note                   Shuts down the database server
`mysql_shutdown()':     
mysql-shutdown.         
*Note                   Prepare to establish SSL connection to server
`mysql_ssl_set()':      
mysql-ssl-set.          
*Note `mysql_stat()':   Returns the server status as a string
mysql-stat.             
*Note                   Retrieves a complete result set to the client
`mysql_store_result()': 
mysql-store-result.     
*Note                   Finalize thread handler
`mysql_thread_end()':   
mysql-thread-end.       
*Note                   Returns the current thread ID
`mysql_thread_id()':    
mysql-thread-id.        
*Note                   Initialize thread handler
`mysql_thread_init()':  
mysql-thread-init.      
*Note                   Returns 1 if the clients are compiled as
`mysql_thread_safe()':  thread-safe
mysql-thread-safe.      
*Note                   Initiates a row-by-row result set retrieval
`mysql_use_result()':   
mysql-use-result.       
*Note                   Returns the warning count for the previous SQL
`mysql_warning_count()':statement
mysql-warning-count.    

Application programs should use this general outline for interacting
with MySQL:

  1. Initialize the MySQL library by calling *Note
     `mysql_library_init()': mysql-library-init. This function exists
     in both the `libmysqlclient' C client library and the `libmysqld'
     embedded server library, so it is used whether you build a regular
     client program by linking with the `-libmysqlclient' flag, or an
     embedded server application by linking with the `-libmysqld' flag.

  2. Initialize a connection handler by calling *Note `mysql_init()':
     mysql-init. and connect to the server by calling *Note
     `mysql_real_connect()': mysql-real-connect.

  3. Issue SQL statements and process their results. (The following
     discussion provides more information about how to do this.)

  4. Close the connection to the MySQL server by calling *Note
     `mysql_close()': mysql-close.

  5. End use of the MySQL library by calling *Note
     `mysql_library_end()': mysql-library-end.

The purpose of calling *Note `mysql_library_init()':
mysql-library-init. and *Note `mysql_library_end()': mysql-library-end.
is to provide proper initialization and finalization of the MySQL
library. For applications that are linked with the client library, they
provide improved memory management. If you don't call *Note
`mysql_library_end()': mysql-library-end, a block of memory remains
allocated. (This does not increase the amount of memory used by the
application, but some memory leak detectors will complain about it.)
For applications that are linked with the embedded server, these calls
start and stop the server.

In a nonmulti-threaded environment, the call to *Note
`mysql_library_init()': mysql-library-init. may be omitted, because
*Note `mysql_init()': mysql-init. will invoke it automatically as
necessary. However, *Note `mysql_library_init()': mysql-library-init.
is not thread-safe in a multi-threaded environment, and thus neither is
*Note `mysql_init()': mysql-init, which calls *Note
`mysql_library_init()': mysql-library-init. You must either call *Note
`mysql_library_init()': mysql-library-init.  prior to spawning any
threads, or else use a mutex to protect the call, whether you invoke
*Note `mysql_library_init()': mysql-library-init. or indirectly through
*Note `mysql_init()': mysql-init. This should be done prior to any
other client library call.

To connect to the server, call *Note `mysql_init()': mysql-init. to
initialize a connection handler, then call *Note
`mysql_real_connect()': mysql-real-connect. with that handler (along
with other information such as the host name, user name, and password).
Upon connection, *Note `mysql_real_connect()': mysql-real-connect. sets
the `reconnect' flag (part of the `MYSQL' structure) to a value of `1'
in versions of the API older than 5.0.3, or `0' in newer versions. A
value of `1' for this flag indicates that if a statement cannot be
performed because of a lost connection, to try reconnecting to the
server before giving up. You can use the `MYSQL_OPT_RECONNECT' option to
*Note `mysql_options()': mysql-options. to control reconnection
behavior. When you are done with the connection, call *Note
`mysql_close()': mysql-close. to terminate it.

While a connection is active, the client may send SQL statements to the
server using *Note `mysql_query()': mysql-query.  or *Note
`mysql_real_query()': mysql-real-query. The difference between the two
is that *Note `mysql_query()': mysql-query. expects the query to be
specified as a null-terminated string whereas *Note
`mysql_real_query()': mysql-real-query. expects a counted string. If
the string contains binary data (which may include null bytes), you
must use *Note `mysql_real_query()': mysql-real-query.

For each non-*Note `SELECT': select. query (for example, *Note
`INSERT': insert, *Note `UPDATE': update, *Note `DELETE': delete.), you
can find out how many rows were changed (affected) by calling *Note
`mysql_affected_rows()': mysql-affected-rows.

For *Note `SELECT': select. queries, you retrieve the selected rows as
a result set. (Note that some statements are *Note `SELECT':
select.-like in that they return rows. These include *Note `SHOW': show,
*Note `DESCRIBE': describe, and *Note `EXPLAIN': explain. Treat these
statements the same way as *Note `SELECT': select. statements.)

There are two ways for a client to process result sets. One way is to
retrieve the entire result set all at once by calling *Note
`mysql_store_result()': mysql-store-result. This function acquires from
the server all the rows returned by the query and stores them in the
client. The second way is for the client to initiate a row-by-row
result set retrieval by calling *Note `mysql_use_result()':
mysql-use-result. This function initializes the retrieval, but does not
actually get any rows from the server.

In both cases, you access rows by calling *Note `mysql_fetch_row()':
mysql-fetch-row. With *Note `mysql_store_result()': mysql-store-result,
*Note `mysql_fetch_row()': mysql-fetch-row. accesses rows that have
previously been fetched from the server. With *Note
`mysql_use_result()': mysql-use-result, *Note `mysql_fetch_row()':
mysql-fetch-row. actually retrieves the row from the server.
Information about the size of the data in each row is available by
calling *Note `mysql_fetch_lengths()': mysql-fetch-lengths.

After you are done with a result set, call *Note `mysql_free_result()':
mysql-free-result. to free the memory used for it.

The two retrieval mechanisms are complementary. Choose the approach
that is most appropriate for each client application. In practice,
clients tend to use *Note `mysql_store_result()': mysql-store-result.
more commonly.

An advantage of *Note `mysql_store_result()': mysql-store-result. is
that because the rows have all been fetched to the client, you not only
can access rows sequentially, you can move back and forth in the result
set using *Note `mysql_data_seek()': mysql-data-seek.  or *Note
`mysql_row_seek()': mysql-row-seek. to change the current row position
within the result set. You can also find out how many rows there are by
calling *Note `mysql_num_rows()': mysql-num-rows. On the other hand,
the memory requirements for *Note `mysql_store_result()':
mysql-store-result. may be very high for large result sets and you are
more likely to encounter out-of-memory conditions.

An advantage of *Note `mysql_use_result()': mysql-use-result.  is that
the client requires less memory for the result set because it maintains
only one row at a time (and because there is less allocation overhead,
*Note `mysql_use_result()': mysql-use-result. can be faster).
Disadvantages are that you must process each row quickly to avoid tying
up the server, you don't have random access to rows within the result
set (you can only access rows sequentially), and you don't know how
many rows are in the result set until you have retrieved them all.
Furthermore, you _must_ retrieve all the rows even if you determine in
mid-retrieval that you've found the information you were looking for.

The API makes it possible for clients to respond appropriately to
statements (retrieving rows only as necessary) without knowing whether
the statement is a *Note `SELECT': select.  You can do this by calling
*Note `mysql_store_result()': mysql-store-result. after each *Note
`mysql_query()': mysql-query. (or *Note `mysql_real_query()':
mysql-real-query.). If the result set call succeeds, the statement was a
*Note `SELECT': select. and you can read the rows.  If the result set
call fails, call *Note `mysql_field_count()': mysql-field-count. to
determine whether a result was actually to be expected. If *Note
`mysql_field_count()': mysql-field-count. returns zero, the statement
returned no data (indicating that it was an *Note `INSERT': insert,
*Note `UPDATE': update, *Note `DELETE': delete, and so forth), and was
not expected to return rows. If *Note `mysql_field_count()':
mysql-field-count. is nonzero, the statement should have returned rows,
but didn't. This indicates that the statement was a *Note `SELECT':
select. that failed. See the description for *Note
`mysql_field_count()': mysql-field-count. for an example of how this
can be done.

Both *Note `mysql_store_result()': mysql-store-result. and *Note
`mysql_use_result()': mysql-use-result. enable you to obtain
information about the fields that make up the result set (the number of
fields, their names and types, and so forth). You can access field
information sequentially within the row by calling *Note
`mysql_fetch_field()': mysql-fetch-field.  repeatedly, or by field
number within the row by calling *Note `mysql_fetch_field_direct()':
mysql-fetch-field-direct. The current field cursor position may be
changed by calling *Note `mysql_field_seek()': mysql-field-seek.
Setting the field cursor affects subsequent calls to *Note
`mysql_fetch_field()': mysql-fetch-field. You can also get information
for fields all at once by calling *Note `mysql_fetch_fields()':
mysql-fetch-fields.

For detecting and reporting errors, MySQL provides access to error
information by means of the *Note `mysql_errno()': mysql-errno. and
*Note `mysql_error()': mysql-error. functions. These return the error
code or error message for the most recently invoked function that can
succeed or fail, enabling you to determine when an error occurred and
what it was.


File: manual.info,  Node: c-api-functions,  Next: c-api-prepared-statements,  Prev: c-api-function-overview,  Up: c-api

22.8.7 C API Function Descriptions
----------------------------------

* Menu:

* mysql-affected-rows::          `mysql_affected_rows()'
* mysql-autocommit::             `mysql_autocommit()'
* mysql-change-user::            `mysql_change_user()'
* mysql-character-set-name::     `mysql_character_set_name()'
* mysql-close::                  `mysql_close()'
* mysql-commit::                 `mysql_commit()'
* mysql-connect::                `mysql_connect()'
* mysql-create-db::              `mysql_create_db()'
* mysql-data-seek::              `mysql_data_seek()'
* mysql-debug::                  `mysql_debug()'
* mysql-drop-db::                `mysql_drop_db()'
* mysql-dump-debug-info::        `mysql_dump_debug_info()'
* mysql-eof::                    `mysql_eof()'
* mysql-errno::                  `mysql_errno()'
* mysql-error::                  `mysql_error()'
* mysql-escape-string::          `mysql_escape_string()'
* mysql-fetch-field::            `mysql_fetch_field()'
* mysql-fetch-field-direct::     `mysql_fetch_field_direct()'
* mysql-fetch-fields::           `mysql_fetch_fields()'
* mysql-fetch-lengths::          `mysql_fetch_lengths()'
* mysql-fetch-row::              `mysql_fetch_row()'
* mysql-field-count::            `mysql_field_count()'
* mysql-field-seek::             `mysql_field_seek()'
* mysql-field-tell::             `mysql_field_tell()'
* mysql-free-result::            `mysql_free_result()'
* mysql-get-character-set-info::  `mysql_get_character_set_info()'
* mysql-get-client-info::        `mysql_get_client_info()'
* mysql-get-client-version::     `mysql_get_client_version()'
* mysql-get-host-info::          `mysql_get_host_info()'
* mysql-get-proto-info::         `mysql_get_proto_info()'
* mysql-get-server-info::        `mysql_get_server_info()'
* mysql-get-server-version::     `mysql_get_server_version()'
* mysql-get-ssl-cipher::         `mysql_get_ssl_cipher()'
* mysql-hex-string::             `mysql_hex_string()'
* mysql-info::                   `mysql_info()'
* mysql-init::                   `mysql_init()'
* mysql-insert-id::              `mysql_insert_id()'
* mysql-kill::                   `mysql_kill()'
* mysql-library-end::            `mysql_library_end()'
* mysql-library-init::           `mysql_library_init()'
* mysql-list-dbs::               `mysql_list_dbs()'
* mysql-list-fields::            `mysql_list_fields()'
* mysql-list-processes::         `mysql_list_processes()'
* mysql-list-tables::            `mysql_list_tables()'
* mysql-more-results::           `mysql_more_results()'
* mysql-next-result::            `mysql_next_result()'
* mysql-num-fields::             `mysql_num_fields()'
* mysql-num-rows::               `mysql_num_rows()'
* mysql-options::                `mysql_options()'
* mysql-ping::                   `mysql_ping()'
* mysql-query::                  `mysql_query()'
* mysql-real-connect::           `mysql_real_connect()'
* mysql-real-escape-string::     `mysql_real_escape_string()'
* mysql-real-query::             `mysql_real_query()'
* mysql-refresh::                `mysql_refresh()'
* mysql-reload::                 `mysql_reload()'
* mysql-rollback::               `mysql_rollback()'
* mysql-row-seek::               `mysql_row_seek()'
* mysql-row-tell::               `mysql_row_tell()'
* mysql-select-db::              `mysql_select_db()'
* mysql-set-character-set::      `mysql_set_character_set()'
* mysql-set-local-infile-default::  `mysql_set_local_infile_default()'
* mysql-set-local-infile-handler::  `mysql_set_local_infile_handler()'
* mysql-set-server-option::      `mysql_set_server_option()'
* mysql-shutdown::               `mysql_shutdown()'
* mysql-sqlstate::               `mysql_sqlstate()'
* mysql-ssl-set::                `mysql_ssl_set()'
* mysql-stat::                   `mysql_stat()'
* mysql-store-result::           `mysql_store_result()'
* mysql-thread-id::              `mysql_thread_id()'
* mysql-use-result::             `mysql_use_result()'
* mysql-warning-count::          `mysql_warning_count()'

In the descriptions here, a parameter or return value of `NULL' means
`NULL' in the sense of the C programming language, not a MySQL `NULL'
value.

Functions that return a value generally return a pointer or an integer.
Unless specified otherwise, functions returning a pointer return a
non-`NULL' value to indicate success or a `NULL' value to indicate an
error, and functions returning an integer return zero to indicate
success or nonzero to indicate an error. Note that `nonzero' means just
that. Unless the function description says otherwise, do not test
against a value other than zero:

     if (result)                   /* correct */
         ... error ...

     if (result < 0)               /* incorrect */
         ... error ...

     if (result == -1)             /* incorrect */
         ... error ...

When a function returns an error, the *Errors* subsection of the
function description lists the possible types of errors. You can find
out which of these occurred by calling *Note `mysql_errno()':
mysql-errno. A string representation of the error may be obtained by
calling *Note `mysql_error()': mysql-error.


File: manual.info,  Node: mysql-affected-rows,  Next: mysql-autocommit,  Prev: c-api-functions,  Up: c-api-functions

22.8.7.1 `mysql_affected_rows()'
................................

`my_ulonglong mysql_affected_rows(MYSQL *mysql)'

* Description *

*Note `mysql_affected_rows()': mysql-affected-rows. may be called
immediately after executing a statement with *Note `mysql_query()':
mysql-query. or *Note `mysql_real_query()': mysql-real-query. It returns
the number of rows changed, deleted, or inserted by the last statement
if it was an *Note `UPDATE': update, *Note `DELETE': delete, or *Note
`INSERT': insert. For *Note `SELECT': select. statements, *Note
`mysql_affected_rows()': mysql-affected-rows. works like *Note
`mysql_num_rows()': mysql-num-rows.

For *Note `UPDATE': update. statements, the affected-rows value by
default is the number of rows actually changed. If you specify the
`CLIENT_FOUND_ROWS' flag to *Note `mysql_real_connect()':
mysql-real-connect.  when connecting to *Note `mysqld': mysqld, the
affected-rows value is the number of rows `found'; that is, matched by
the `WHERE' clause.

For *Note `REPLACE': replace. statements, the affected-rows value is 2
if the new row replaced an old row, because in this case, one row was
inserted after the duplicate was deleted.

For *Note `INSERT ... ON DUPLICATE KEY UPDATE': insert-on-duplicate.
statements, the affected-rows value per row is 1 if the row is inserted
as a new row, 2 if an existing row is updated, and 0 if an existing row
is set to its current values. If you specify the `CLIENT_FOUND_ROWS'
flag, the affected-rows value is 1 (not 0) if an existing row is set to
its current values.

Following a *Note `CALL': call. statement for a stored procedure, *Note
`mysql_affected_rows()': mysql-affected-rows. returns the value that it
would return for the last statement executed within the procedure, or
`0' if that statement would return `-1'. Within the procedure, you can
use `ROW_COUNT()' at the SQL level to obtain the affected-rows value
for individual statements.

As of MySQL 5.5.5, *Note `mysql_affected_rows()': mysql-affected-rows.
returns a meaningful value for a wider range of statements. For details,
see the description for `ROW_COUNT()' in *Note information-functions::.

* Return Values *

An integer greater than zero indicates the number of rows affected or
retrieved. Zero indicates that no records were updated for an *Note
`UPDATE': update. statement, no rows matched the `WHERE' clause in the
query or that no query has yet been executed. -1 indicates that the
query returned an error or that, for a *Note `SELECT': select. query,
*Note `mysql_affected_rows()': mysql-affected-rows. was called prior to
calling *Note `mysql_store_result()': mysql-store-result.

Because *Note `mysql_affected_rows()': mysql-affected-rows.  returns an
unsigned value, you can check for -1 by comparing the return value to
`(my_ulonglong)-1' (or to `(my_ulonglong)~0', which is equivalent).

* Errors *

None.

* Example *

     char *stmt = "UPDATE products SET cost=cost*1.25
                   WHERE group=10";
     mysql_query(&mysql,stmt);
     printf("%ld products updated",
            (long) mysql_affected_rows(&mysql));


File: manual.info,  Node: mysql-autocommit,  Next: mysql-change-user,  Prev: mysql-affected-rows,  Up: c-api-functions

22.8.7.2 `mysql_autocommit()'
.............................

`my_bool mysql_autocommit(MYSQL *mysql, my_bool mode)'

* Description *

Sets autocommit mode on if `mode' is 1, off if `mode' is 0.

* Return Values *

Zero if successful. Nonzero if an error occurred.

* Errors *

None.


File: manual.info,  Node: mysql-change-user,  Next: mysql-character-set-name,  Prev: mysql-autocommit,  Up: c-api-functions

22.8.7.3 `mysql_change_user()'
..............................

`my_bool mysql_change_user(MYSQL *mysql, const char *user, const char
*password, const char *db)'

* Description *

Changes the user and causes the database specified by `db' to become
the default (current) database on the connection specified by `mysql'.
In subsequent queries, this database is the default for table
references that do not include an explicit database specifier.

*Note `mysql_change_user()': mysql-change-user. fails if the connected
user cannot be authenticated or doesn't have permission to use the
database. In this case, the user and database are not changed.

The `db' parameter may be set to `NULL' if you don't want to have a
default database.

This command resets the state as if one had done a new connect.  (See
*Note auto-reconnect::.) It always performs a *Note `ROLLBACK': commit.
of any active transactions, closes and drops all temporary tables, and
unlocks all locked tables. Session system variables are reset to the
values of the corresponding global system variables. Prepared
statements are released and *Note `HANDLER': handler. variables are
closed.  Locks acquired with `GET_LOCK()' are released. These effects
occur even if the user didn't change.

* Return Values *

Zero for success. Nonzero if an error occurred.

* Errors *

The same that you can get from *Note `mysql_real_connect()':
mysql-real-connect.

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.

   * `ER_UNKNOWN_COM_ERROR'

     The MySQL server doesn't implement this command (probably an old
     server).

   * `ER_ACCESS_DENIED_ERROR'

     The user or password was wrong.

   * `ER_BAD_DB_ERROR'

     The database didn't exist.

   * `ER_DBACCESS_DENIED_ERROR'

     The user did not have access rights to the database.

   * `ER_WRONG_DB_NAME'

     The database name was too long.

* Example *

     if (mysql_change_user(&mysql, "user", "password", "new_database"))
     {
        fprintf(stderr, "Failed to change user.  Error: %s\n",
                mysql_error(&mysql));
     }


File: manual.info,  Node: mysql-character-set-name,  Next: mysql-close,  Prev: mysql-change-user,  Up: c-api-functions

22.8.7.4 `mysql_character_set_name()'
.....................................

`const char *mysql_character_set_name(MYSQL *mysql)'

* Description *

Returns the default character set name for the current connection.

* Return Values *

The default character set name

* Errors *

None.


File: manual.info,  Node: mysql-close,  Next: mysql-commit,  Prev: mysql-character-set-name,  Up: c-api-functions

22.8.7.5 `mysql_close()'
........................

`void mysql_close(MYSQL *mysql)'

* Description *

Closes a previously opened connection.  *Note `mysql_close()':
mysql-close. also deallocates the connection handle pointed to by
`mysql' if the handle was allocated automatically by *Note
`mysql_init()': mysql-init. or *Note `mysql_connect()': mysql-connect.

* Return Values *

None.

* Errors *

None.


File: manual.info,  Node: mysql-commit,  Next: mysql-connect,  Prev: mysql-close,  Up: c-api-functions

22.8.7.6 `mysql_commit()'
.........................

`my_bool mysql_commit(MYSQL *mysql)'

* Description *

Commits the current transaction.

The action of this function is subject to the value of the
`completion_type' system variable. In particular, if the value of
`completion_type' is `RELEASE' (or 2), the server performs a release
after terminating a transaction and closes the client connection. Call
*Note `mysql_close()': mysql-close.  from the client program to close
the connection from the client side.

* Return Values *

Zero if successful. Nonzero if an error occurred.

* Errors *

None.


File: manual.info,  Node: mysql-connect,  Next: mysql-create-db,  Prev: mysql-commit,  Up: c-api-functions

22.8.7.7 `mysql_connect()'
..........................

`MYSQL *mysql_connect(MYSQL *mysql, const char *host, const char *user,
const char *passwd)'

* Description *

This function is deprecated. Use *Note `mysql_real_connect()':
mysql-real-connect. instead.

*Note `mysql_connect()': mysql-connect. attempts to establish a
connection to a MySQL database engine running on `host'.  *Note
`mysql_connect()': mysql-connect. must complete successfully before you
can execute any of the other API functions, with the exception of *Note
`mysql_get_client_info()': mysql-get-client-info.

The meanings of the parameters are the same as for the corresponding
parameters for *Note `mysql_real_connect()': mysql-real-connect. with
the difference that the connection parameter may be `NULL'. In this
case, the C API allocates memory for the connection structure
automatically and frees it when you call *Note `mysql_close()':
mysql-close. The disadvantage of this approach is that you can't
retrieve an error message if the connection fails. (To get error
information from *Note `mysql_errno()': mysql-errno. or *Note
`mysql_error()': mysql-error, you must provide a valid `MYSQL' pointer.)

* Return Values *

Same as for *Note `mysql_real_connect()': mysql-real-connect.

* Errors *

Same as for *Note `mysql_real_connect()': mysql-real-connect.


File: manual.info,  Node: mysql-create-db,  Next: mysql-data-seek,  Prev: mysql-connect,  Up: c-api-functions

22.8.7.8 `mysql_create_db()'
............................

`int mysql_create_db(MYSQL *mysql, const char *db)'

* Description *

Creates the database named by the `db' parameter.

This function is deprecated. It is preferable to use *Note
`mysql_query()': mysql-query. to issue an SQL *Note `CREATE DATABASE':
create-database. statement instead.

* Return Values *

Zero if the database was created successfully. Nonzero if an error
occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.

* Example *

     if(mysql_create_db(&mysql, "my_database"))
     {
        fprintf(stderr, "Failed to create new database.  Error: %s\n",
                mysql_error(&mysql));
     }


File: manual.info,  Node: mysql-data-seek,  Next: mysql-debug,  Prev: mysql-create-db,  Up: c-api-functions

22.8.7.9 `mysql_data_seek()'
............................

`void mysql_data_seek(MYSQL_RES *result, my_ulonglong offset)'

* Description *

Seeks to an arbitrary row in a query result set. The `offset' value is
a row number. Specify a value in the range from `0' to *Note
`mysql_num_rows(result)-1': mysql-num-rows.

This function requires that the result set structure contains the
entire result of the query, so *Note `mysql_data_seek()':
mysql-data-seek. may be used only in conjunction with *Note
`mysql_store_result()': mysql-store-result, not with *Note
`mysql_use_result()': mysql-use-result.

* Return Values *

None.

* Errors *

None.


File: manual.info,  Node: mysql-debug,  Next: mysql-drop-db,  Prev: mysql-data-seek,  Up: c-api-functions

22.8.7.10 `mysql_debug()'
.........................

`void mysql_debug(const char *debug)'

* Description *

Does a `DBUG_PUSH' with the given string.  *Note `mysql_debug()':
mysql-debug. uses the Fred Fish debug library. To use this function,
you must compile the client library to support debugging. See *Note
dbug-package::.

* Return Values *

None.

* Errors *

None.

* Example *

The call shown here causes the client library to generate a trace file
in `/tmp/client.trace' on the client machine:

     mysql_debug("d:t:O,/tmp/client.trace");


File: manual.info,  Node: mysql-drop-db,  Next: mysql-dump-debug-info,  Prev: mysql-debug,  Up: c-api-functions

22.8.7.11 `mysql_drop_db()'
...........................

`int mysql_drop_db(MYSQL *mysql, const char *db)'

* Description *

Drops the database named by the `db' parameter.

This function is deprecated. It is preferable to use *Note
`mysql_query()': mysql-query. to issue an SQL *Note `DROP DATABASE':
drop-database. statement instead.

* Return Values *

Zero if the database was dropped successfully. Nonzero if an error
occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.

* Example *

     if(mysql_drop_db(&mysql, "my_database"))
       fprintf(stderr, "Failed to drop the database: Error: %s\n",
               mysql_error(&mysql));


File: manual.info,  Node: mysql-dump-debug-info,  Next: mysql-eof,  Prev: mysql-drop-db,  Up: c-api-functions

22.8.7.12 `mysql_dump_debug_info()'
...................................

`int mysql_dump_debug_info(MYSQL *mysql)'

* Description *

Instructs the server to write debugging information to the error log.
The connected user must have the `SUPER' privilege.

* Return Values *

Zero if the command was successful. Nonzero if an error occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: mysql-eof,  Next: mysql-errno,  Prev: mysql-dump-debug-info,  Up: c-api-functions

22.8.7.13 `mysql_eof()'
.......................

`my_bool mysql_eof(MYSQL_RES *result)'

* Description *

This function is deprecated.  *Note `mysql_errno()': mysql-errno. or
*Note `mysql_error()': mysql-error. may be used instead.

*Note `mysql_eof()': mysql-eof. determines whether the last row of a
result set has been read.

If you acquire a result set from a successful call to *Note
`mysql_store_result()': mysql-store-result, the client receives the
entire set in one operation. In this case, a `NULL' return from *Note
`mysql_fetch_row()': mysql-fetch-row. always means the end of the
result set has been reached and it is unnecessary to call *Note
`mysql_eof()': mysql-eof. When used with *Note `mysql_store_result()':
mysql-store-result, *Note `mysql_eof()': mysql-eof. always returns true.

On the other hand, if you use *Note `mysql_use_result()':
mysql-use-result. to initiate a result set retrieval, the rows of the
set are obtained from the server one by one as you call *Note
`mysql_fetch_row()': mysql-fetch-row. repeatedly.  Because an error may
occur on the connection during this process, a `NULL' return value from
*Note `mysql_fetch_row()': mysql-fetch-row. does not necessarily mean
the end of the result set was reached normally.  In this case, you can
use *Note `mysql_eof()': mysql-eof. to determine what happened. *Note
`mysql_eof()': mysql-eof. returns a nonzero value if the end of the
result set was reached and zero if an error occurred.

Historically, *Note `mysql_eof()': mysql-eof.  predates the standard
MySQL error functions *Note `mysql_errno()': mysql-errno. and *Note
`mysql_error()': mysql-error. Because those error functions provide the
same information, their use is preferred over *Note `mysql_eof()':
mysql-eof, which is deprecated. (In fact, they provide more information,
because *Note `mysql_eof()': mysql-eof. returns only a boolean value
whereas the error functions indicate a reason for the error when one
occurs.)

* Return Values *

Zero if no error occurred. Nonzero if the end of the result set has
been reached.

* Errors *

None.

* Example *

The following example shows how you might use *Note `mysql_eof()':
mysql-eof.:

     mysql_query(&mysql,"SELECT * FROM some_table");
     result = mysql_use_result(&mysql);
     while((row = mysql_fetch_row(result)))
     {
         // do something with data
     }
     if(!mysql_eof(result))  // mysql_fetch_row() failed due to an error
     {
         fprintf(stderr, "Error: %s\n", mysql_error(&mysql));
     }

However, you can achieve the same effect with the standard MySQL error
functions:

     mysql_query(&mysql,"SELECT * FROM some_table");
     result = mysql_use_result(&mysql);
     while((row = mysql_fetch_row(result)))
     {
         // do something with data
     }
     if(mysql_errno(&mysql))  // mysql_fetch_row() failed due to an error
     {
         fprintf(stderr, "Error: %s\n", mysql_error(&mysql));
     }


File: manual.info,  Node: mysql-errno,  Next: mysql-error,  Prev: mysql-eof,  Up: c-api-functions

22.8.7.14 `mysql_errno()'
.........................

`unsigned int mysql_errno(MYSQL *mysql)'

* Description *

For the connection specified by `mysql', *Note `mysql_errno()':
mysql-errno. returns the error code for the most recently invoked API
function that can succeed or fail. A return value of zero means that no
error occurred.  Client error message numbers are listed in the MySQL
`errmsg.h' header file. Server error message numbers are listed in
`mysqld_error.h'.  Errors also are listed at *Note error-handling::.

Note that some functions like *Note `mysql_fetch_row()':
mysql-fetch-row. don't set *Note `mysql_errno()': mysql-errno. if they
succeed.

A rule of thumb is that all functions that have to ask the server for
information reset *Note `mysql_errno()': mysql-errno. if they succeed.

MySQL-specific error numbers returned by *Note `mysql_errno()':
mysql-errno. differ from SQLSTATE values returned by *Note
`mysql_sqlstate()': mysql-sqlstate. For example, the *Note `mysql':
mysql. client program displays errors using the following format, where
`1146' is the *Note `mysql_errno()': mysql-errno. value and `'42S02''
is the corresponding *Note `mysql_sqlstate()': mysql-sqlstate. value:

     shell> SELECT * FROM no_such_table;
     ERROR 1146 (42S02): Table 'test.no_such_table' doesn't exist

* Return Values *

An error code value for the last `mysql_XXX()' call, if it failed. zero
means no error occurred.

* Errors *

None.


File: manual.info,  Node: mysql-error,  Next: mysql-escape-string,  Prev: mysql-errno,  Up: c-api-functions

22.8.7.15 `mysql_error()'
.........................

`const char *mysql_error(MYSQL *mysql)'

* Description *

For the connection specified by `mysql', *Note `mysql_error()':
mysql-error. returns a null-terminated string containing the error
message for the most recently invoked API function that failed. If a
function didn't fail, the return value of *Note `mysql_error()':
mysql-error. may be the previous error or an empty string to indicate
no error.

A rule of thumb is that all functions that have to ask the server for
information reset *Note `mysql_error()': mysql-error. if they succeed.

For functions that reset *Note `mysql_error()': mysql-error, either of
these two tests can be used to check for an error:

     if(*mysql_error(&mysql))
     {
       // an error occurred
     }

     if(mysql_error(&mysql)[0])
     {
       // an error occurred
     }

The language of the client error messages may be changed by recompiling
the MySQL client library. Currently, you can choose error messages in
several different languages. See *Note error-message-language::.

* Return Values *

A null-terminated character string that describes the error. An empty
string if no error occurred.

* Errors *

None.


File: manual.info,  Node: mysql-escape-string,  Next: mysql-fetch-field,  Prev: mysql-error,  Up: c-api-functions

22.8.7.16 `mysql_escape_string()'
.................................

Use *Note `mysql_real_escape_string()': mysql-real-escape-string.
instead!

This function is identical to *Note `mysql_real_escape_string()':
mysql-real-escape-string.  except that *Note
`mysql_real_escape_string()': mysql-real-escape-string. takes a
connection handler as its first argument and escapes the string
according to the current character set.  *Note `mysql_escape_string()':
mysql-escape-string. does not take a connection argument and does not
respect the current character set.


File: manual.info,  Node: mysql-fetch-field,  Next: mysql-fetch-field-direct,  Prev: mysql-escape-string,  Up: c-api-functions

22.8.7.17 `mysql_fetch_field()'
...............................

`MYSQL_FIELD *mysql_fetch_field(MYSQL_RES *result)'

* Description *

Returns the definition of one column of a result set as a `MYSQL_FIELD'
structure. Call this function repeatedly to retrieve information about
all columns in the result set. *Note `mysql_fetch_field()':
mysql-fetch-field.  returns `NULL' when no more fields are left.

*Note `mysql_fetch_field()': mysql-fetch-field. is reset to return
information about the first field each time you execute a new *Note
`SELECT': select. query. The field returned by *Note
`mysql_fetch_field()': mysql-fetch-field.  is also affected by calls to
*Note `mysql_field_seek()': mysql-field-seek.

If you've called *Note `mysql_query()': mysql-query.  to perform a
*Note `SELECT': select. on a table but have not called *Note
`mysql_store_result()': mysql-store-result, MySQL returns the default
blob length (8KB) if you call *Note `mysql_fetch_field()':
mysql-fetch-field. to ask for the length of a *Note `BLOB': blob.
field. (The 8KB size is chosen because MySQL doesn't know the maximum
length for the *Note `BLOB': blob. This should be made configurable
sometime.) Once you've retrieved the result set, `field->max_length'
contains the length of the largest value for this column in the
specific query.

* Return Values *

The `MYSQL_FIELD' structure for the current column. `NULL' if no
columns are left.

* Errors *

None.

* Example *

     MYSQL_FIELD *field;

     while((field = mysql_fetch_field(result)))
     {
         printf("field name %s\n", field->name);
     }


File: manual.info,  Node: mysql-fetch-field-direct,  Next: mysql-fetch-fields,  Prev: mysql-fetch-field,  Up: c-api-functions

22.8.7.18 `mysql_fetch_field_direct()'
......................................

`MYSQL_FIELD *mysql_fetch_field_direct(MYSQL_RES *result, unsigned int
fieldnr)'

* Description *

Given a field number `fieldnr' for a column within a result set,
returns that column's field definition as a `MYSQL_FIELD' structure.
Use this function to retrieve the definition for an arbitrary column.
Specify a value for `fieldnr' in the range from 0 to *Note
`mysql_num_fields(result)-1': mysql-num-fields.

* Return Values *

The `MYSQL_FIELD' structure for the specified column.

* Errors *

None.

* Example *

     unsigned int num_fields;
     unsigned int i;
     MYSQL_FIELD *field;

     num_fields = mysql_num_fields(result);
     for(i = 0; i < num_fields; i++)
     {
         field = mysql_fetch_field_direct(result, i);
         printf("Field %u is %s\n", i, field->name);
     }


File: manual.info,  Node: mysql-fetch-fields,  Next: mysql-fetch-lengths,  Prev: mysql-fetch-field-direct,  Up: c-api-functions

22.8.7.19 `mysql_fetch_fields()'
................................

`MYSQL_FIELD *mysql_fetch_fields(MYSQL_RES *result)'

* Description *

Returns an array of all `MYSQL_FIELD' structures for a result set. Each
structure provides the field definition for one column of the result
set.

* Return Values *

An array of `MYSQL_FIELD' structures for all columns of a result set.

* Errors *

None.

* Example *

     unsigned int num_fields;
     unsigned int i;
     MYSQL_FIELD *fields;

     num_fields = mysql_num_fields(result);
     fields = mysql_fetch_fields(result);
     for(i = 0; i < num_fields; i++)
     {
        printf("Field %u is %s\n", i, fields[i].name);
     }


File: manual.info,  Node: mysql-fetch-lengths,  Next: mysql-fetch-row,  Prev: mysql-fetch-fields,  Up: c-api-functions

22.8.7.20 `mysql_fetch_lengths()'
.................................

`unsigned long *mysql_fetch_lengths(MYSQL_RES *result)'

* Description *

Returns the lengths of the columns of the current row within a result
set. If you plan to copy field values, this length information is also
useful for optimization, because you can avoid calling `strlen()'. In
addition, if the result set contains binary data, you *must* use this
function to determine the size of the data, because `strlen()' returns
incorrect results for any field containing null characters.

The length for empty columns and for columns containing `NULL' values
is zero. To see how to distinguish these two cases, see the description
for *Note `mysql_fetch_row()': mysql-fetch-row.

* Return Values *

An array of unsigned long integers representing the size of each column
(not including any terminating null characters).  `NULL' if an error
occurred.

* Errors *

*Note `mysql_fetch_lengths()': mysql-fetch-lengths. is valid only for
the current row of the result set. It returns `NULL' if you call it
before calling *Note `mysql_fetch_row()': mysql-fetch-row. or after
retrieving all rows in the result.

* Example *

     MYSQL_ROW row;
     unsigned long *lengths;
     unsigned int num_fields;
     unsigned int i;

     row = mysql_fetch_row(result);
     if (row)
     {
         num_fields = mysql_num_fields(result);
         lengths = mysql_fetch_lengths(result);
         for(i = 0; i < num_fields; i++)
         {
              printf("Column %u is %lu bytes in length.\n",
                     i, lengths[i]);
         }
     }


File: manual.info,  Node: mysql-fetch-row,  Next: mysql-field-count,  Prev: mysql-fetch-lengths,  Up: c-api-functions

22.8.7.21 `mysql_fetch_row()'
.............................

`MYSQL_ROW mysql_fetch_row(MYSQL_RES *result)'

* Description *

Retrieves the next row of a result set. When used after *Note
`mysql_store_result()': mysql-store-result, *Note `mysql_fetch_row()':
mysql-fetch-row. returns `NULL' when there are no more rows to retrieve.
When used after *Note `mysql_use_result()': mysql-use-result, *Note
`mysql_fetch_row()': mysql-fetch-row. returns `NULL' when there are no
more rows to retrieve or if an error occurred.

The number of values in the row is given by *Note
`mysql_num_fields(result)': mysql-num-fields. If `row' holds the return
value from a call to *Note `mysql_fetch_row()': mysql-fetch-row,
pointers to the values are accessed as `row[0]' to
`row[mysql_num_fields(result)-1]'.  `NULL' values in the row are
indicated by `NULL' pointers.

The lengths of the field values in the row may be obtained by calling
*Note `mysql_fetch_lengths()': mysql-fetch-lengths.  Empty fields and
fields containing `NULL' both have length 0; you can distinguish these
by checking the pointer for the field value. If the pointer is `NULL',
the field is `NULL'; otherwise, the field is empty.

* Return Values *

A `MYSQL_ROW' structure for the next row.  `NULL' if there are no more
rows to retrieve or if an error occurred.

* Errors *

Note that error is not reset between calls to *Note
`mysql_fetch_row()': mysql-fetch-row.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.

* Example *

     MYSQL_ROW row;
     unsigned int num_fields;
     unsigned int i;

     num_fields = mysql_num_fields(result);
     while ((row = mysql_fetch_row(result)))
     {
        unsigned long *lengths;
        lengths = mysql_fetch_lengths(result);
        for(i = 0; i < num_fields; i++)
        {
            printf("[%.*s] ", (int) lengths[i],
                   row[i] ? row[i] : "NULL");
        }
        printf("\n");
     }


File: manual.info,  Node: mysql-field-count,  Next: mysql-field-seek,  Prev: mysql-fetch-row,  Up: c-api-functions

22.8.7.22 `mysql_field_count()'
...............................

`unsigned int mysql_field_count(MYSQL *mysql)'

* Description *

Returns the number of columns for the most recent query on the
connection.

The normal use of this function is when *Note `mysql_store_result()':
mysql-store-result. returned `NULL' (and thus you have no result set
pointer). In this case, you can call *Note `mysql_field_count()':
mysql-field-count. to determine whether *Note `mysql_store_result()':
mysql-store-result.  should have produced a nonempty result. This
enables the client program to take proper action without knowing
whether the query was a *Note `SELECT': select. (or *Note `SELECT':
select.-like) statement. The example shown here illustrates how this
may be done.

See *Note null-mysql-store-result::.

* Return Values *

An unsigned integer representing the number of columns in a result set.

* Errors *

None.

* Example *

     MYSQL_RES *result;
     unsigned int num_fields;
     unsigned int num_rows;

     if (mysql_query(&mysql,query_string))
     {
         // error
     }
     else // query succeeded, process any data returned by it
     {
         result = mysql_store_result(&mysql);
         if (result)  // there are rows
         {
             num_fields = mysql_num_fields(result);
             // retrieve rows, then call mysql_free_result(result)
         }
         else  // mysql_store_result() returned nothing; should it have?
         {
             if(mysql_field_count(&mysql) == 0)
             {
                 // query does not return data
                 // (it was not a SELECT)
                 num_rows = mysql_affected_rows(&mysql);
             }
             else // mysql_store_result() should have returned data
             {
                 fprintf(stderr, "Error: %s\n", mysql_error(&mysql));
             }
         }
     }

An alternative is to replace the *Note `mysql_field_count(&mysql)':
mysql-field-count.  call with *Note `mysql_errno(&mysql)': mysql-errno.
In this case, you are checking directly for an error from *Note
`mysql_store_result()': mysql-store-result. rather than inferring from
the value of *Note `mysql_field_count()': mysql-field-count. whether the
statement was a *Note `SELECT': select.


File: manual.info,  Node: mysql-field-seek,  Next: mysql-field-tell,  Prev: mysql-field-count,  Up: c-api-functions

22.8.7.23 `mysql_field_seek()'
..............................

`MYSQL_FIELD_OFFSET mysql_field_seek(MYSQL_RES *result,
MYSQL_FIELD_OFFSET offset)'

* Description *

Sets the field cursor to the given offset. The next call to *Note
`mysql_fetch_field()': mysql-fetch-field. retrieves the field
definition of the column associated with that offset.

To seek to the beginning of a row, pass an `offset' value of zero.

* Return Values *

The previous value of the field cursor.

* Errors *

None.


File: manual.info,  Node: mysql-field-tell,  Next: mysql-free-result,  Prev: mysql-field-seek,  Up: c-api-functions

22.8.7.24 `mysql_field_tell()'
..............................

`MYSQL_FIELD_OFFSET mysql_field_tell(MYSQL_RES *result)'

* Description *

Returns the position of the field cursor used for the last *Note
`mysql_fetch_field()': mysql-fetch-field. This value can be used as an
argument to *Note `mysql_field_seek()': mysql-field-seek.

* Return Values *

The current offset of the field cursor.

* Errors *

None.


File: manual.info,  Node: mysql-free-result,  Next: mysql-get-character-set-info,  Prev: mysql-field-tell,  Up: c-api-functions

22.8.7.25 `mysql_free_result()'
...............................

`void mysql_free_result(MYSQL_RES *result)'

* Description *

Frees the memory allocated for a result set by *Note
`mysql_store_result()': mysql-store-result, *Note `mysql_use_result()':
mysql-use-result, *Note `mysql_list_dbs()': mysql-list-dbs, and so
forth.  When you are done with a result set, you must free the memory it
uses by calling *Note `mysql_free_result()': mysql-free-result.

Do not attempt to access a result set after freeing it.

* Return Values *

None.

* Errors *

None.


File: manual.info,  Node: mysql-get-character-set-info,  Next: mysql-get-client-info,  Prev: mysql-free-result,  Up: c-api-functions

22.8.7.26 `mysql_get_character_set_info()'
..........................................

`void mysql_get_character_set_info(MYSQL *mysql, MY_CHARSET_INFO *cs)'

* Description *

This function provides information about the default client character
set. The default character set may be changed with the *Note
`mysql_set_character_set()': mysql-set-character-set.  function.

* Example *

This example shows the fields that are available in the
`MY_CHARSET_INFO' structure:

     if (!mysql_set_character_set(&mysql, "utf8"))
     {
         MY_CHARSET_INFO cs;
         mysql_get_character_set_info(&mysql, &cs);
         printf("character set information:\n");
         printf("character set+collation number: %d\n", cs.number);
         printf("character set name: %s\n", cs.name);
         printf("collation name: %s\n", cs.csname);
         printf("comment: %s\n", cs.comment);
         printf("directory: %s\n", cs.dir);
         printf("multi byte character min. length: %d\n", cs.mbminlen);
         printf("multi byte character max. length: %d\n", cs.mbmaxlen);
     }


File: manual.info,  Node: mysql-get-client-info,  Next: mysql-get-client-version,  Prev: mysql-get-character-set-info,  Up: c-api-functions

22.8.7.27 `mysql_get_client_info()'
...................................

`const char *mysql_get_client_info(void)'

* Description *

Returns a string that represents the client library version.

* Return Values *

A character string that represents the MySQL client library version.

* Errors *

None.


File: manual.info,  Node: mysql-get-client-version,  Next: mysql-get-host-info,  Prev: mysql-get-client-info,  Up: c-api-functions

22.8.7.28 `mysql_get_client_version()'
......................................

`unsigned long mysql_get_client_version(void)'

* Description *

Returns an integer that represents the client library version.  The
value has the format `XYYZZ' where `X' is the major version, `YY' is
the release level, and `ZZ' is the version number within the release
level. For example, a value of `40102' represents a client library
version of `4.1.2'.

* Return Values *

An integer that represents the MySQL client library version.

* Errors *

None.


File: manual.info,  Node: mysql-get-host-info,  Next: mysql-get-proto-info,  Prev: mysql-get-client-version,  Up: c-api-functions

22.8.7.29 `mysql_get_host_info()'
.................................

`const char *mysql_get_host_info(MYSQL *mysql)'

* Description *

Returns a string describing the type of connection in use, including
the server host name.

* Return Values *

A character string representing the server host name and the connection
type.

* Errors *

None.


File: manual.info,  Node: mysql-get-proto-info,  Next: mysql-get-server-info,  Prev: mysql-get-host-info,  Up: c-api-functions

22.8.7.30 `mysql_get_proto_info()'
..................................

`unsigned int mysql_get_proto_info(MYSQL *mysql)'

* Description *

Returns the protocol version used by current connection.

* Return Values *

An unsigned integer representing the protocol version used by the
current connection.

* Errors *

None.


File: manual.info,  Node: mysql-get-server-info,  Next: mysql-get-server-version,  Prev: mysql-get-proto-info,  Up: c-api-functions

22.8.7.31 `mysql_get_server_info()'
...................................

`const char *mysql_get_server_info(MYSQL *mysql)'

* Description *

Returns a string that represents the server version number.

* Return Values *

A character string that represents the server version number.

* Errors *

None.


File: manual.info,  Node: mysql-get-server-version,  Next: mysql-get-ssl-cipher,  Prev: mysql-get-server-info,  Up: c-api-functions

22.8.7.32 `mysql_get_server_version()'
......................................

`unsigned long mysql_get_server_version(MYSQL *mysql)'

* Description *

Returns the version number of the server as an integer.

* Return Values *

A number that represents the MySQL server version in this format:

     major_version*10000 + minor_version *100 + sub_version

For example, 5.1.5 is returned as 50105.

This function is useful in client programs for quickly determining
whether some version-specific server capability exists.

* Errors *

None.


File: manual.info,  Node: mysql-get-ssl-cipher,  Next: mysql-hex-string,  Prev: mysql-get-server-version,  Up: c-api-functions

22.8.7.33 `mysql_get_ssl_cipher()'
..................................

`const char *mysql_get_ssl_cipher(MYSQL *mysql)'

* Description *

*Note `mysql_get_ssl_cipher()': mysql-get-ssl-cipher. returns the SSL
cipher used for the given connection to the server.  `mysql' is the
connection handler returned from *Note `mysql_init()': mysql-init.

* Return Values *

A string naming the SSL cipher used for the connection, or `NULL' if no
cipher is being used.


File: manual.info,  Node: mysql-hex-string,  Next: mysql-info,  Prev: mysql-get-ssl-cipher,  Up: c-api-functions

22.8.7.34 `mysql_hex_string()'
..............................

`unsigned long mysql_hex_string(char *to, const char *from, unsigned
long length)'

* Description *

This function is used to create a legal SQL string that you can use in
an SQL statement. See *Note string-literals::.

The string in `from' is encoded to hexadecimal format, with each
character encoded as two hexadecimal digits.  The result is placed in
`to' and a terminating null byte is appended.

The string pointed to by `from' must be `length' bytes long. You must
allocate the `to' buffer to be at least `length*2+1' bytes long. When
*Note `mysql_hex_string()': mysql-hex-string. returns, the contents of
`to' is a null-terminated string.  The return value is the length of
the encoded string, not including the terminating null character.

The return value can be placed into an SQL statement using either
`0xVALUE' or `X'VALUE'' format.  However, the return value does not
include the `0x' or `X'...''. The caller must supply whichever of those
is desired.

* Example *

     char query[1000],*end;

     end = strmov(query,"INSERT INTO test_table values(");
     end = strmov(end,"0x");
     end += mysql_hex_string(end,"What is this",12);
     end = strmov(end,",0x");
     end += mysql_hex_string(end,"binary data: \0\r\n",16);
     *end++ = ')';

     if (mysql_real_query(&mysql,query,(unsigned int) (end - query)))
     {
        fprintf(stderr, "Failed to insert row, Error: %s\n",
                mysql_error(&mysql));
     }

The `strmov()' function used in the example is included in the
`libmysqlclient' library and works like `strcpy()' but returns a
pointer to the terminating null of the first parameter.

* Return Values *

The length of the value placed into `to', not including the terminating
null character.

* Errors *

None.


File: manual.info,  Node: mysql-info,  Next: mysql-init,  Prev: mysql-hex-string,  Up: c-api-functions

22.8.7.35 `mysql_info()'
........................

`const char *mysql_info(MYSQL *mysql)'

* Description *

Retrieves a string providing information about the most recently
executed statement, but only for the statements listed here. For other
statements, *Note `mysql_info()': mysql-info.  returns `NULL'. The
format of the string varies depending on the type of statement, as
described here. The numbers are illustrative only; the string contains
values appropriate for the statement.

   * *Note `INSERT INTO ... SELECT ...': insert-select.

     String format: `Records: 100 Duplicates: 0 Warnings: 0'

   * `INSERT INTO ... VALUES (...),(...),(...)...'

     String format: `Records: 3 Duplicates: 0 Warnings: 0'

   * *Note `LOAD DATA INFILE ...': load-data.

     String format: `Records: 1 Deleted: 0 Skipped: 0 Warnings: 0'

   * *Note `ALTER TABLE': alter-table.

     String format: `Records: 3 Duplicates: 0 Warnings: 0'

   * *Note `UPDATE': update.

     String format: `Rows matched: 40 Changed: 40 Warnings: 0'

Note that *Note `mysql_info()': mysql-info. returns a non-`NULL' value
for *Note `INSERT ... VALUES': insert. only for the multiple-row form
of the statement (that is, only if multiple value lists are specified).

* Return Values *

A character string representing additional information about the most
recently executed statement. `NULL' if no information is available for
the statement.

* Errors *

None.


File: manual.info,  Node: mysql-init,  Next: mysql-insert-id,  Prev: mysql-info,  Up: c-api-functions

22.8.7.36 `mysql_init()'
........................

`MYSQL *mysql_init(MYSQL *mysql)'

* Description *

Allocates or initializes a `MYSQL' object suitable for *Note
`mysql_real_connect()': mysql-real-connect. If `mysql' is a `NULL'
pointer, the function allocates, initializes, and returns a new object.
Otherwise, the object is initialized and the address of the object is
returned. If *Note `mysql_init()': mysql-init. allocates a new object,
it is freed when *Note `mysql_close()': mysql-close. is called to close
the connection.

* Return Values *

An initialized `MYSQL*' handle.  `NULL' if there was insufficient
memory to allocate a new object.

* Errors *

In case of insufficient memory, `NULL' is returned.


File: manual.info,  Node: mysql-insert-id,  Next: mysql-kill,  Prev: mysql-init,  Up: c-api-functions

22.8.7.37 `mysql_insert_id()'
.............................

`my_ulonglong mysql_insert_id(MYSQL *mysql)'

* Description *

Returns the value generated for an `AUTO_INCREMENT' column by the
previous *Note `INSERT': insert. or *Note `UPDATE': update. statement.
Use this function after you have performed an *Note `INSERT': insert.
statement into a table that contains an `AUTO_INCREMENT' field, or have
used *Note `INSERT': insert. or *Note `UPDATE': update. to set a column
value with `LAST_INSERT_ID(EXPR)'.

The return value of *Note `mysql_insert_id()': mysql-insert-id. is
always zero unless explicitly updated under one of the following
conditions:

   * *Note `INSERT': insert. statements that store a value into an
     `AUTO_INCREMENT' column.  This is true whether the value is
     automatically generated by storing the special values `NULL' or
     `0' into the column, or is an explicit nonspecial value.

   * In the case of a multiple-row *Note `INSERT': insert. statement,
     *Note `mysql_insert_id()': mysql-insert-id. returns the first
     automatically generated `AUTO_INCREMENT' value that was
     successfully inserted.

     If no rows are successfully inserted, *Note `mysql_insert_id()':
     mysql-insert-id. returns 0.

   * If an *Note `INSERT ... SELECT': insert-select. statement is
     executed, and no automatically generated value is successfully
     inserted, *Note `mysql_insert_id()': mysql-insert-id. returns the
     ID of the last inserted row.

   * If an *Note `INSERT ... SELECT': insert-select. statement uses
     `LAST_INSERT_ID(EXPR)', *Note `mysql_insert_id()':
     mysql-insert-id. returns EXPR.

   * *Note `INSERT': insert. statements that generate an
     `AUTO_INCREMENT' value by inserting `LAST_INSERT_ID(EXPR)' into
     any column or by updating any column to `LAST_INSERT_ID(EXPR)'.

   * If the previous statement returned an error, the value of *Note
     `mysql_insert_id()': mysql-insert-id. is undefined.

The return value of *Note `mysql_insert_id()': mysql-insert-id. can be
simplified to the following sequence:

  1. If there is an `AUTO_INCREMENT' column, and an automatically
     generated value was successfully inserted, return the first such
     value.

  2. If `LAST_INSERT_ID(EXPR)' occurred in the statement, return EXPR,
     even if there was an `AUTO_INCREMENT' column in the affected table.

  3. The return value varies depending on the statement used.  When
     called after an *Note `INSERT': insert.  statement:

        * If there is an `AUTO_INCREMENT' column in the table, and
          there were some explicit values for this column that were
          successfully inserted into the table, return the last of the
          explicit values.

     When called after an *Note `INSERT ... ON DUPLICATE KEY UPDATE':
     insert-on-duplicate. statement:

        * If there is an `AUTO_INCREMENT' column in the table and there
          were some explicit successfully inserted values or some
          updated values, return the last of the inserted or updated
          values.

*Note `mysql_insert_id()': mysql-insert-id. returns `0' if the previous
statement does not use an `AUTO_INCREMENT' value. If you need to save
the value for later, be sure to call *Note `mysql_insert_id()':
mysql-insert-id. immediately after the statement that generates the
value.

The value of *Note `mysql_insert_id()': mysql-insert-id.  is affected
only by statements issued within the current client connection. It is
not affected by statements issued by other clients.

The `LAST_INSERT_ID()' SQL function will contain the value of the first
automatically generated value that was successfully inserted.
`LAST_INSERT_ID()' is not reset between statements because the value of
that function is maintained in the server. Another difference from
*Note `mysql_insert_id()': mysql-insert-id. is that `LAST_INSERT_ID()'
is not updated if you set an `AUTO_INCREMENT' column to a specific
nonspecial value. See *Note information-functions::.

*Note `mysql_insert_id()': mysql-insert-id. returns `0' following a
*Note `CALL': call. statement for a stored procedure that generates an
`AUTO_INCREMENT' value because in this case *Note `mysql_insert_id()':
mysql-insert-id. applies to *Note `CALL': call. and not the statement
within the procedure. Within the procedure, you can use
`LAST_INSERT_ID()' at the SQL level to obtain the `AUTO_INCREMENT'
value.

The reason for the differences between `LAST_INSERT_ID()' and *Note
`mysql_insert_id()': mysql-insert-id. is that `LAST_INSERT_ID()' is
made easy to use in scripts while *Note `mysql_insert_id()':
mysql-insert-id. tries to provide more exact information about what
happens to the `AUTO_INCREMENT' column.

* Return Values *

Described in the preceding discussion.

* Errors *

None.


File: manual.info,  Node: mysql-kill,  Next: mysql-library-end,  Prev: mysql-insert-id,  Up: c-api-functions

22.8.7.38 `mysql_kill()'
........................

`int mysql_kill(MYSQL *mysql, unsigned long pid)'

* Description *

Asks the server to kill the thread specified by `pid'.

This function is deprecated. It is preferable to use *Note
`mysql_query()': mysql-query. to issue an SQL *Note `KILL': kill.
statement instead.

* Return Values *

Zero for success. Nonzero if an error occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: mysql-library-end,  Next: mysql-library-init,  Prev: mysql-kill,  Up: c-api-functions

22.8.7.39 `mysql_library_end()'
...............................

`void mysql_library_end(void)'

* Description *

This function finalizes the MySQL library. Call it when you are done
using the library (for example, after disconnecting from the server).
The action taken by the call depends on whether your application is
linked to the MySQL client library or the MySQL embedded server
library. For a client program linked against the `libmysqlclient'
library by using the `-lmysqlclient' flag, *Note `mysql_library_end()':
mysql-library-end. performs some memory management to clean up. For an
embedded server application linked against the `libmysqld' library by
using the `-lmysqld' flag, *Note `mysql_library_end()':
mysql-library-end. shuts down the embedded server and then cleans up.

For usage information, see *Note c-api-function-overview::, and *Note
mysql-library-init::.


File: manual.info,  Node: mysql-library-init,  Next: mysql-list-dbs,  Prev: mysql-library-end,  Up: c-api-functions

22.8.7.40 `mysql_library_init()'
................................

`int mysql_library_init(int argc, char **argv, char **groups)'

* Description *

Call this function to initialize the MySQL library before you call any
other MySQL function, whether your application is a regular client
program or uses the embedded server. If the application uses the
embedded server, this call starts the server and initializes any
subsystems (`mysys', `InnoDB', and so forth) that the server uses.

After your application is done using the MySQL library, call *Note
`mysql_library_end()': mysql-library-end. to clean up.  See *Note
mysql-library-end::.

The choice of whether the application operates as a regular client or
uses the embedded server depends on whether you use the
`libmysqlclient' or `libmysqld' library at link time to produce the
final executable. For additional information, see *Note
c-api-function-overview::.

In a nonmulti-threaded environment, the call to *Note
`mysql_library_init()': mysql-library-init. may be omitted, because
*Note `mysql_init()': mysql-init.  will invoke it automatically as
necessary. However, *Note `mysql_library_init()': mysql-library-init.
is not thread-safe in a multi-threaded environment, and thus neither is
*Note `mysql_init()': mysql-init, which calls *Note
`mysql_library_init()': mysql-library-init. You must either call *Note
`mysql_library_init()': mysql-library-init.  prior to spawning any
threads, or else use a mutex to protect the call, whether you invoke
*Note `mysql_library_init()': mysql-library-init. or indirectly through
*Note `mysql_init()': mysql-init.  Do this prior to any other client
library call.

The `argc' and `argv' arguments are analogous to the arguments to
`main()', and enable passing of options to the embedded server. For
convenience, `argc' may be `0' (zero) if there are no command-line
arguments for the server. This is the usual case for applications
intended for use only as regular (nonembedded) clients, and the call
typically is written as *Note `mysql_library_init(0, NULL, NULL)':
mysql-library-init.

     #include <mysql.h>
     #include <stdlib.h>

     int main(void) {
       if (mysql_library_init(0, NULL, NULL)) {
         fprintf(stderr, "could not initialize MySQL library\n");
         exit(1);
       }

       /* Use any MySQL API functions here */

       mysql_library_end();

       return EXIT_SUCCESS;
     }

When arguments are to be passed (`argc' is greater than `0'), the first
element of `argv' is ignored (it typically contains the program name).
*Note `mysql_library_init()': mysql-library-init. makes a copy of the
arguments so it is safe to destroy `argv' or `groups' after the call.

For embedded applications, if you want to connect to an external server
without starting the embedded server, you have to specify a negative
value for `argc'.

The `groups' argument is an array of strings that indicate the groups
in option files from which to read options. See *Note option-files::.
Make the final entry in the array `NULL'. For convenience, if the
`groups' argument itself is `NULL', the `[server]' and `[embedded]'
groups are used by default.

     #include <mysql.h>
     #include <stdlib.h>

     static char *server_args[] = {
       "this_program",       /* this string is not used */
       "--datadir=.",
       "--key_buffer_size=32M"
     };
     static char *server_groups[] = {
       "embedded",
       "server",
       "this_program_SERVER",
       (char *)NULL
     };

     int main(void) {
       if (mysql_library_init(sizeof(server_args) / sizeof(char *),
                             server_args, server_groups)) {
         fprintf(stderr, "could not initialize MySQL library\n");
         exit(1);
       }

       /* Use any MySQL API functions here */

       mysql_library_end();

       return EXIT_SUCCESS;
     }

* Return Values *

Zero if successful. Nonzero if an error occurred.


File: manual.info,  Node: mysql-list-dbs,  Next: mysql-list-fields,  Prev: mysql-library-init,  Up: c-api-functions

22.8.7.41 `mysql_list_dbs()'
............................

`MYSQL_RES *mysql_list_dbs(MYSQL *mysql, const char *wild)'

* Description *

Returns a result set consisting of database names on the server that
match the simple regular expression specified by the `wild' parameter.
`wild' may contain the wildcard characters ``%'' or ``_'', or may be a
`NULL' pointer to match all databases. Calling *Note
`mysql_list_dbs()': mysql-list-dbs. is similar to executing the query
`SHOW DATABASES [LIKE WILD]'.

You must free the result set with *Note `mysql_free_result()':
mysql-free-result.

* Return Values *

A `MYSQL_RES' result set for success.  `NULL' if an error occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_OUT_OF_MEMORY'

     Out of memory.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: mysql-list-fields,  Next: mysql-list-processes,  Prev: mysql-list-dbs,  Up: c-api-functions

22.8.7.42 `mysql_list_fields()'
...............................

`MYSQL_RES *mysql_list_fields(MYSQL *mysql, const char *table, const
char *wild)'

* Description *

Returns an empty result set for which the metadata provides information
aobut the columns in the given table that match the simple regular
expression specified by the `wild' parameter. `wild' may contain the
wildcard characters ``%'' or ``_'', or may be a `NULL' pointer to match
all fields. Calling *Note `mysql_list_fields()': mysql-list-fields. is
similar to executing the query `SHOW COLUMNS FROM TBL_NAME [LIKE WILD]'.

It is preferable to use `SHOW COLUMNS FROM TBL_NAME' instead of *Note
`mysql_list_fields()': mysql-list-fields.

You must free the result set with *Note `mysql_free_result()':
mysql-free-result.

* Return Values *

A `MYSQL_RES' result set for success.  `NULL' if an error occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.

* Example *

     int i;
     MYSQL_RES *tbl_cols = mysql_list_fields(mysql, "mytbl", "f%");

     unsigned int field_cnt = mysql_num_fields(tbl_cols);
     printf("Number of columns: %d\n", field_cnt);

     for (i=0; i < field_cnt; ++i)
     {
       /* col describes i-th column of the table */
       MYSQL_FIELD *col = mysql_fetch_field_direct(tbl_cols, i);
       printf ("Column %d: %s\n", i, col->name);
     }
     mysql_free_result(tbl_cols);


File: manual.info,  Node: mysql-list-processes,  Next: mysql-list-tables,  Prev: mysql-list-fields,  Up: c-api-functions

22.8.7.43 `mysql_list_processes()'
..................................

`MYSQL_RES *mysql_list_processes(MYSQL *mysql)'

* Description *

Returns a result set describing the current server threads. This is the
same kind of information as that reported by *Note `mysqladmin
processlist': mysqladmin. or a *Note `SHOW PROCESSLIST':
show-processlist. query.

You must free the result set with *Note `mysql_free_result()':
mysql-free-result.

* Return Values *

A `MYSQL_RES' result set for success.  `NULL' if an error occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: mysql-list-tables,  Next: mysql-more-results,  Prev: mysql-list-processes,  Up: c-api-functions

22.8.7.44 `mysql_list_tables()'
...............................

`MYSQL_RES *mysql_list_tables(MYSQL *mysql, const char *wild)'

* Description *

Returns a result set consisting of table names in the current database
that match the simple regular expression specified by the `wild'
parameter. `wild' may contain the wildcard characters ``%'' or ``_'',
or may be a `NULL' pointer to match all tables. Calling *Note
`mysql_list_tables()': mysql-list-tables. is similar to executing the
query `SHOW TABLES [LIKE WILD]'.

You must free the result set with *Note `mysql_free_result()':
mysql-free-result.

* Return Values *

A `MYSQL_RES' result set for success.  `NULL' if an error occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: mysql-more-results,  Next: mysql-next-result,  Prev: mysql-list-tables,  Up: c-api-functions

22.8.7.45 `mysql_more_results()'
................................

`my_bool mysql_more_results(MYSQL *mysql)'

* Description *

This function is used when you execute multiple statements specified as
a single statement string, or when you execute *Note `CALL': call.
statements, which can return multiple result sets.

*Note `mysql_more_results()': mysql-more-results. true if more results
exist from the currently executed statement, in which case the
application must call *Note `mysql_next_result()': mysql-next-result.
to fetch the results.

* Return Values *

`TRUE' (1) if more results exist.  `FALSE' (0) if no more results exist.

In most cases, you can call *Note `mysql_next_result()':
mysql-next-result. instead to test whether more results exist and
initiate retrieval if so.

See *Note c-api-multiple-queries::, and *Note mysql-next-result::.

* Errors *

None.


File: manual.info,  Node: mysql-next-result,  Next: mysql-num-fields,  Prev: mysql-more-results,  Up: c-api-functions

22.8.7.46 `mysql_next_result()'
...............................

`int mysql_next_result(MYSQL *mysql)'

* Description *

This function is used when you execute multiple statements specified as
a single statement string, or when you use *Note `CALL': call.
statements to execute stored procedures, which can return multiple
result sets.

*Note `mysql_next_result()': mysql-next-result. reads the next
statement result and returns a status to indicate whether more results
exist. If *Note `mysql_next_result()': mysql-next-result. returns an
error, there are no more results.

Before each call to *Note `mysql_next_result()': mysql-next-result, you
must call *Note `mysql_free_result()': mysql-free-result. for the
current statement if it is a statement that returned a result set
(rather than just a result status).

After calling *Note `mysql_next_result()': mysql-next-result. the state
of the connection is as if you had called *Note `mysql_real_query()':
mysql-real-query. or *Note `mysql_query()': mysql-query. for the next
statement. This means that you can call *Note `mysql_store_result()':
mysql-store-result, *Note `mysql_warning_count()': mysql-warning-count,
*Note `mysql_affected_rows()': mysql-affected-rows, and so forth.

If your program uses *Note `CALL': call.  statements to execute stored
procedures, the `CLIENT_MULTI_RESULTS' flag must be enabled.  This is
because each *Note `CALL': call. returns a result to indicate the call
status, in addition to any result sets that might be returned by
statements executed within the procedure. Because *Note `CALL': call.
can return multiple results, process them using a loop that calls *Note
`mysql_next_result()': mysql-next-result. to determine whether there
are more results.

`CLIENT_MULTI_RESULTS' can be enabled when you call *Note
`mysql_real_connect()': mysql-real-connect, either explicitly by
passing the `CLIENT_MULTI_RESULTS' flag itself, or implicitly by
passing `CLIENT_MULTI_STATEMENTS' (which also enables
`CLIENT_MULTI_RESULTS'). As of MySQL 5.5.3, `CLIENT_MULTI_RESULTS' is
enabled by default.

It is also possible to test whether there are more results by calling
*Note `mysql_more_results()': mysql-more-results.  However, this
function does not change the connection state, so if it returns true,
you must still call *Note `mysql_next_result()': mysql-next-result. to
advance to the next result.

For an example that shows how to use *Note `mysql_next_result()':
mysql-next-result, see *Note c-api-multiple-queries::.

* Return Values *

This table lists *Note `mysql_next_result()': mysql-next-result. return
values and provides a description of each.

Return Value              Description
0                         Successful and there are more results
-1                        Successful and there are no more results
>0                        An error occurred

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order. For example, if you
     didn't call *Note `mysql_use_result()': mysql-use-result. for a
     previous result set.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: mysql-num-fields,  Next: mysql-num-rows,  Prev: mysql-next-result,  Up: c-api-functions

22.8.7.47 `mysql_num_fields()'
..............................

`unsigned int mysql_num_fields(MYSQL_RES *result)'

To pass a `MYSQL*' argument instead, use `unsigned int
mysql_field_count(MYSQL *mysql)'.

* Description *

Returns the number of columns in a result set.

Note that you can get the number of columns either from a pointer to a
result set or to a connection handle. You would use the connection
handle if *Note `mysql_store_result()': mysql-store-result. or *Note
`mysql_use_result()': mysql-use-result. returned `NULL' (and thus you
have no result set pointer). In this case, you can call *Note
`mysql_field_count()': mysql-field-count. to determine whether *Note
`mysql_store_result()': mysql-store-result.  should have produced a
nonempty result. This enables the client program to take proper action
without knowing whether the query was a *Note `SELECT': select. (or
*Note `SELECT': select.-like) statement. The example shown here
illustrates how this may be done.

See *Note null-mysql-store-result::.

* Return Values *

An unsigned integer representing the number of columns in a result set.

* Errors *

None.

* Example *

     MYSQL_RES *result;
     unsigned int num_fields;
     unsigned int num_rows;

     if (mysql_query(&mysql,query_string))
     {
         // error
     }
     else // query succeeded, process any data returned by it
     {
         result = mysql_store_result(&mysql);
         if (result)  // there are rows
         {
             num_fields = mysql_num_fields(result);
             // retrieve rows, then call mysql_free_result(result)
         }
         else  // mysql_store_result() returned nothing; should it have?
         {
             if (mysql_errno(&mysql))
             {
                fprintf(stderr, "Error: %s\n", mysql_error(&mysql));
             }
             else if (mysql_field_count(&mysql) == 0)
             {
                 // query does not return data
                 // (it was not a SELECT)
                 num_rows = mysql_affected_rows(&mysql);
             }
         }
     }

An alternative (if you know that your query should have returned a
result set) is to replace the *Note `mysql_errno(&mysql)': mysql-errno.
call with a check whether *Note `mysql_field_count(&mysql)':
mysql-field-count.  returns 0. This happens only if something went
wrong.


File: manual.info,  Node: mysql-num-rows,  Next: mysql-options,  Prev: mysql-num-fields,  Up: c-api-functions

22.8.7.48 `mysql_num_rows()'
............................

`my_ulonglong mysql_num_rows(MYSQL_RES *result)'

* Description *

Returns the number of rows in the result set.

The use of *Note `mysql_num_rows()': mysql-num-rows.  depends on
whether you use *Note `mysql_store_result()': mysql-store-result. or
*Note `mysql_use_result()': mysql-use-result. to return the result set.
If you use *Note `mysql_store_result()': mysql-store-result, *Note
`mysql_num_rows()': mysql-num-rows. may be called immediately. If you
use *Note `mysql_use_result()': mysql-use-result, *Note
`mysql_num_rows()': mysql-num-rows. does not return the correct value
until all the rows in the result set have been retrieved.

*Note `mysql_num_rows()': mysql-num-rows. is intended for use with
statements that return a result set, such as *Note `SELECT': select.
For statements such as *Note `INSERT': insert, *Note `UPDATE': update,
or *Note `DELETE': delete, the number of affected rows can be obtained
with *Note `mysql_affected_rows()': mysql-affected-rows.

* Return Values *

The number of rows in the result set.

* Errors *

None.


File: manual.info,  Node: mysql-options,  Next: mysql-ping,  Prev: mysql-num-rows,  Up: c-api-functions

22.8.7.49 `mysql_options()'
...........................

`int mysql_options(MYSQL *mysql, enum mysql_option option, const void
*arg)'

* Description *

Can be used to set extra connect options and affect behavior for a
connection. This function may be called multiple times to set several
options.

Call *Note `mysql_options()': mysql-options. after *Note
`mysql_init()': mysql-init. and before *Note `mysql_connect()':
mysql-connect. or *Note `mysql_real_connect()': mysql-real-connect.

The `option' argument is the option that you want to set; the `arg'
argument is the value for the option. If the option is an integer,
specify a pointer to the value of the integer as the `arg' argument.

The following list describes the possible options, their effect, and
how `arg' is used for each option. Several of the options apply only
when the application is linked against the `libmysqld' embedded server
library and are unused for applications linked against the
`libmysqlclient' client library. For option descriptions that indicate
`arg' is unused, its value is irrelevant; it is conventional to pass 0.

   * `MYSQL_DEFAULT_AUTH' (argument type: `char *')

     The name of the authentication plugin to use. This option was
     added in MySQL 5.5.7.

   * `MYSQL_ENABLE_CLEARTEXT_PLUGIN' (argument type: `my_bool *')

     Enable the `mysql_clear_password' cleartext authentication plugin.
     (See *Note cleartext-authentication-plugin::.) This option was
     added in MySQL 5.5.27.

   * `MYSQL_INIT_COMMAND' (argument type: `char *')

     SQL statement to execute when connecting to the MySQL server.
     Automatically re-executed if reconnection occurs.

   * `MYSQL_OPT_COMPRESS' (argument: not used)

     Use the compressed client/server protocol.

   * `MYSQL_OPT_CONNECT_TIMEOUT' (argument type: `unsigned int *')

     Connect timeout in seconds.

   * `MYSQL_OPT_GUESS_CONNECTION' (argument: not used)

     For an application linked against the `libmysqld' embedded server
     library, this enables the library to guess whether to use the
     embedded server or a remote server. `Guess' means that if the host
     name is set and is not `localhost', it uses a remote server. This
     behavior is the default.  `MYSQL_OPT_USE_EMBEDDED_CONNECTION' and
     `MYSQL_OPT_USE_REMOTE_CONNECTION' can be used to override it. This
     option is ignored for applications linked against the
     `libmysqlclient' client library.

   * `MYSQL_OPT_LOCAL_INFILE' (argument type: optional pointer to
     `unsigned int')

     If no pointer is given or if pointer points to an `unsigned int'
     that has a nonzero value, the `LOAD LOCAL INFILE' statement is
     enabled.

   * `MYSQL_OPT_NAMED_PIPE' (argument: not used)

     Use named pipes to connect to a MySQL server on Windows, if the
     server permits named-pipe connections.

   * `MYSQL_OPT_PROTOCOL' (argument type: `unsigned int *')

     Type of protocol to use. Specify one of the enum values of
     `mysql_protocol_type' defined in `mysql.h'.

   * `MYSQL_OPT_READ_TIMEOUT' (argument type: `unsigned int *')

     The timeout in seconds for each attempt to read from the server.
     There are retries if necessary, so the total effective timeout
     value is three times the option value. You can set the value so
     that a lost connection can be detected earlier than the TCP/IP
     `Close_Wait_Timeout' value of 10 minutes.

     Implementation of this timeout uses mechanisms that may not be
     available on all platforms. On such a platform, a client that
     issues a read call might under certain circumstances wait without
     timing out. For example, a client might not time out if the server
     is not responding because it is waiting for a `disk full'
     condition to clear.

   * `MYSQL_OPT_RECONNECT' (argument type: `my_bool *')

     Enable or disable automatic reconnection to the server if the
     connection is found to have been lost. Reconnect is off by
     default; this option provides a way to set reconnection behavior
     explicitly.

   * `MYSQL_OPT_SSL_VERIFY_SERVER_CERT' (argument type: `my_bool *')

     Enable or disable verification of the server's Common Name value
     in its certificate against the host name used when connecting to
     the server. The connection is rejected if there is a mismatch.
     This feature can be used to prevent man-in-the-middle attacks.
     Verification is disabled by default.

   * `MYSQL_OPT_USE_EMBEDDED_CONNECTION' (argument: not used)

     For an application linked against the `libmysqld' embedded server
     library, this forces the use of the embedded server for the
     connection.  This option is ignored for applications linked
     against the `libmysqlclient' client library.

   * `MYSQL_OPT_USE_REMOTE_CONNECTION' (argument: not used)

     For an application linked against the `libmysqld' embedded server
     library, this forces the use of a remote server for the
     connection. This option is ignored for applications linked against
     the `libmysqlclient' client library.

   * `MYSQL_OPT_USE_RESULT' (argument: not used)

     This option is unused.

   * `MYSQL_OPT_WRITE_TIMEOUT' (argument type: `unsigned int *')

     The timeout in seconds for each attempt to write to the server.
     There is a retry if necessary, so the total effective timeout
     value is two times the option value.

   * `MYSQL_PLUGIN_DIR' (argument type: `char *')

     The directory in which to look for client plugins. This option was
     added in MySQL 5.5.7.

   * `MYSQL_READ_DEFAULT_FILE' (argument type: `char *')

     Read options from the named option file instead of from `my.cnf'.

   * `MYSQL_READ_DEFAULT_GROUP' (argument type: `char *')

     Read options from the named group from `my.cnf' or the file
     specified with `MYSQL_READ_DEFAULT_FILE'.

   * `MYSQL_REPORT_DATA_TRUNCATION' (argument type: `my_bool *')

     Enable or disable reporting of data truncation errors for prepared
     statements using the `error' member of `MYSQL_BIND' structures.
     (Default: enabled.)

   * `MYSQL_SECURE_AUTH' (argument type: `my_bool *')

     Whether to connect to a server that does not support the password
     hashing used in MySQL 4.1.1 and later.

   * `MYSQL_SET_CHARSET_DIR' (argument type: `char *')

     The path name to the directory that contains character set
     definition files.

   * `MYSQL_SET_CHARSET_NAME' (argument type: `char *')

     The name of the character set to use as the default character set.
     The argument can be `MYSQL_AUTODETECT_CHARSET_NAME' to cause the
     character set to be autodetected based on the operating system
     setting (see *Note charset-connection::).

   * `MYSQL_SET_CLIENT_IP' (argument type: `char *')

     For an application linked against the `libmysqld' embedded server
     library (when `libmysqld' is compiled with authentication
     support), this means that the user is considered to have connected
     from the specified IP address (specified as a string) for
     authentication purposes. This option is ignored for applications
     linked against the `libmysqlclient' client library.

   * `MYSQL_SHARED_MEMORY_BASE_NAME' (argument type: `char *')

     The name of the shared-memory object for communication to the
     server on Windows, if the server supports shared-memory
     connections. Specify the same value as the
     `--shared-memory-base-name' option used for the *Note `mysqld':
     mysqld. server you want to connect to.

The `client' group is always read if you use `MYSQL_READ_DEFAULT_FILE'
or `MYSQL_READ_DEFAULT_GROUP'.

The specified group in the option file may contain the following
options.

This table lists options that may appear in the option file and
provides a description of each option.

Option                    Description
`character-sets-dir=PATH' The directory where character sets are
                          installed.
`compress'                Use the compressed client/server protocol.
`connect-timeout=SECONDS' Connect timeout in seconds. On Linux this
                          timeout is also used for waiting for the first
                          answer from the server.
`database=DB_NAME'        Connect to this database if no database was
                          specified in the connect command.
`debug'                   Debug options.
`default-character-set=CHARSET_NAME'The default character set to use.
`disable-local-infile'    Disable use of *Note `LOAD DATA LOCAL':
                          load-data.
`enable-cleartext-plugin' Enable the `mysql_clear_password' cleartext
                          authentication plugin. Added in MySQL 5.5.27.
`host=HOST_NAME'          Default host name.
`init-command=STMT'       Statement to execute when connecting to MySQL
                          server. Automatically re-executed if
                          reconnection occurs.
`interactive-timeout=SECONDS'Same as specifying `CLIENT_INTERACTIVE' to
                          *Note `mysql_real_connect()':
                          mysql-real-connect.  See *Note
                          mysql-real-connect::.
`local-infile[={0|1}]'    If no argument or nonzero argument, enable use
                          of *Note `LOAD DATA LOCAL': load-data.;
                          otherwise disable.
`max_allowed_packet=BYTES'Maximum size of packet that client can read
                          from server.
`multi-queries',          Enable multiple result sets from
`multi-results'           multiple-statement executions or stored
                          procedures.
`multi-statements'        Enable the client to send multiple statements
                          in a single string (separated by ``;'').
`password=PASSWORD'       Default password.
`pipe'                    Use named pipes to connect to a MySQL server
                          on Windows.
`port=PORT_NUM'           Default port number.
`protocol={TCP|SOCKET|PIPE|MEMORY}'The protocol to use when connecting to the
                          server.
`return-found-rows'       Tell *Note `mysql_info()': mysql-info. to
                          return found rows instead of updated rows when
                          using *Note `UPDATE': update.
`shared-memory-base-name=NAME'Shared-memory name to use to connect to server.
`socket=PATH'             Default socket file.
`ssl-ca=FILE_NAME'        Certificate Authority file.
`ssl-capath=PATH'         Certificate Authority directory.
`ssl-cert=FILE_NAME'      Certificate file.
`ssl-cipher=CIPHER_LIST'  Permissible SSL ciphers.
`ssl-key=FILE_NAME'       Key file.
`timeout=SECONDS'         Like `connect-timeout'.
`user'                    Default user.

`timeout' has been replaced by `connect-timeout', but `timeout' is
still supported in MySQL 5.5 for backward compatibility.

For more information about option files, see *Note option-files::.

* Return Values *

Zero for success. Nonzero if you specify an unknown option.

* Example *

The following *Note `mysql_options()': mysql-options.  calls request
the use of compression in the client/server protocol, cause options to
be read from the `[odbc]' group of option files, and disable
transaction autocommit mode:

     MYSQL mysql;

     mysql_init(&mysql);
     mysql_options(&mysql,MYSQL_OPT_COMPRESS,0);
     mysql_options(&mysql,MYSQL_READ_DEFAULT_GROUP,"odbc");
     mysql_options(&mysql,MYSQL_INIT_COMMAND,"SET autocommit=0");
     if (!mysql_real_connect(&mysql,"host","user","passwd","database",0,NULL,0))
     {
         fprintf(stderr, "Failed to connect to database: Error: %s\n",
               mysql_error(&mysql));
     }

This code requests that the client use the compressed client/server
protocol and read the additional options from the `odbc' section in the
`my.cnf' file.


File: manual.info,  Node: mysql-ping,  Next: mysql-query,  Prev: mysql-options,  Up: c-api-functions

22.8.7.50 `mysql_ping()'
........................

`int mysql_ping(MYSQL *mysql)'

* Description *

Checks whether the connection to the server is working. If the
connection has gone down and auto-reconnect is enabled an attempt to
reconnect is made. If the connection is down and auto-reconnect is
disabled, *Note `mysql_ping()': mysql-ping. returns an error.

Auto-reconnect is disabled by default. To enable it, call *Note
`mysql_options()': mysql-options. with the `MYSQL_OPT_RECONNECT'
option. For details, see *Note mysql-options::.

*Note `mysql_ping()': mysql-ping. can be used by clients that remain
idle for a long while, to check whether the server has closed the
connection and reconnect if necessary.

If *Note `mysql_ping()': mysql-ping.) does cause a reconnect, there is
no explicit indication of it. To determine whether a reconnect occurs,
call *Note `mysql_thread_id()': mysql-thread-id. to get the original
connection identifier before calling *Note `mysql_ping()': mysql-ping,
then call *Note `mysql_thread_id()': mysql-thread-id. again to see
whether the identifier has changed.

If reconnect occurs, some characteristics of the connection will have
been reset. For details about these characteristics, see *Note
auto-reconnect::.

* Return Values *

Zero if the connection to the server is active. Nonzero if an error
occurred. A nonzero return does not indicate whether the MySQL server
itself is down; the connection might be broken for other reasons such
as network problems.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: mysql-query,  Next: mysql-real-connect,  Prev: mysql-ping,  Up: c-api-functions

22.8.7.51 `mysql_query()'
.........................

`int mysql_query(MYSQL *mysql, const char *stmt_str)'

* Description *

Executes the SQL statement pointed to by the null-terminated string
`stmt_str'. Normally, the string must consist of a single SQL statement
without a terminating semicolon (``;'') or `\g'. If multiple-statement
execution has been enabled, the string can contain several statements
separated by semicolons. See *Note c-api-multiple-queries::.

*Note `mysql_query()': mysql-query. cannot be used for statements that
contain binary data; you must use *Note `mysql_real_query()':
mysql-real-query. instead.  (Binary data may contain the ``\0''
character, which *Note `mysql_query()': mysql-query. interprets as the
end of the statement string.)

If you want to know whether the statement should return a result set,
you can use *Note `mysql_field_count()': mysql-field-count. to check for
this. See *Note mysql-field-count::.

* Return Values *

Zero if the statement was successful. Nonzero if an error occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: mysql-real-connect,  Next: mysql-real-escape-string,  Prev: mysql-query,  Up: c-api-functions

22.8.7.52 `mysql_real_connect()'
................................

`MYSQL *mysql_real_connect(MYSQL *mysql, const char *host, const char
*user, const char *passwd, const char *db, unsigned int port, const
char *unix_socket, unsigned long client_flag)'

* Description *

*Note `mysql_real_connect()': mysql-real-connect. attempts to establish
a connection to a MySQL database engine running on `host'.  *Note
`mysql_real_connect()': mysql-real-connect. must complete successfully
before you can execute any other API functions that require a valid
`MYSQL' connection handle structure.

The parameters are specified as follows:

   * For the first parameter, specify the address of an existing
     `MYSQL' structure. Before calling *Note `mysql_real_connect()':
     mysql-real-connect, call *Note `mysql_init()': mysql-init. to
     initialize the `MYSQL' structure. You can change a lot of connect
     options with the *Note `mysql_options()': mysql-options. call. See
     *Note mysql-options::.

   * The value of `host' may be either a host name or an IP address. If
     `host' is `NULL' or the string `"localhost"', a connection to the
     local host is assumed. For Windows, the client connects using a
     shared-memory connection, if the server has shared-memory
     connections enabled. Otherwise, TCP/IP is used. For Unix, the
     client connects using a Unix socket file. For local connections,
     you can also influence the type of connection to use with the
     `MYSQL_OPT_PROTOCOL' or `MYSQL_OPT_NAMED_PIPE' options to *Note
     `mysql_options()': mysql-options. The type of connection must be
     supported by the server. For a `host' value of `"."' on Windows,
     the client connects using a named pipe, if the server has
     named-pipe connections enabled. If named-pipe connections are not
     enabled, an error occurs.

   * The `user' parameter contains the user's MySQL login ID. If `user'
     is `NULL' or the empty string `""', the current user is assumed.
     Under Unix, this is the current login name. Under Windows ODBC,
     the current user name must be specified explicitly. See the
     Connector/ODBC section of *Note connectors-apis::.

   * The `passwd' parameter contains the password for `user'. If
     `passwd' is `NULL', only entries in the `user' table for the user
     that have a blank (empty) password field are checked for a match.
     This enables the database administrator to set up the MySQL
     privilege system in such a way that users get different privileges
     depending on whether they have specified a password.

     *Note*:

     Do not attempt to encrypt the password before calling *Note
     `mysql_real_connect()': mysql-real-connect.; password encryption
     is handled automatically by the client API.

   * The `user' and `passwd' parameters use whatever character set has
     been configured for the `MYSQL' object. By default, this is
     `latin1', but can be changed by calling *Note
     `mysql_options(mysql, MYSQL_SET_CHARSET_NAME, "CHARSET_NAME")':
     mysql-options. prior to connecting.

   * `db' is the database name. If `db' is not `NULL', the connection
     sets the default database to this value.

   * If `port' is not 0, the value is used as the port number for the
     TCP/IP connection. Note that the `host' parameter determines the
     type of the connection.

   * If `unix_socket' is not `NULL', the string specifies the socket or
     named pipe to use. Note that the `host' parameter determines the
     type of the connection.

   * The value of `client_flag' is usually 0, but can be set to a
     combination of the following flags to enable certain features.

     This table lists flag names and provides a description of each.

     Flag Name               Flag Description
     `CLIENT_COMPRESS'       Use compression protocol.
     `CLIENT_FOUND_ROWS'     Return the number of found (matched) rows,
                             not the number of changed rows.
     `CLIENT_IGNORE_SIGPIPE' Prevents the client library from installing
                             a `SIGPIPE' signal handler. This can be
                             used to avoid conflicts with a handler that
                             the application has already installed.
     `CLIENT_IGNORE_SPACE'   Permit spaces after function names. Makes
                             all functions names reserved words.
     `CLIENT_INTERACTIVE'    Permit `interactive_timeout' seconds
                             (instead of `wait_timeout' seconds) of
                             inactivity before closing the connection.
                             The client's session `wait_timeout'
                             variable is set to the value of the session
                             `interactive_timeout' variable.
     `CLIENT_LOCAL_FILES'    Enable *Note `LOAD DATA LOCAL': load-data.
                             handling.
     `CLIENT_MULTI_RESULTS'  Tell the server that the client can handle
                             multiple result sets from
                             multiple-statement executions or stored
                             procedures.  This flag is automatically
                             enabled if `CLIENT_MULTI_STATEMENTS' is
                             enabled. See the note following this table
                             for more information about this flag.
     `CLIENT_MULTI_STATEMENTS'Tell the server that the client may send
                             multiple statements in a single string
                             (separated by ``;''). If this flag is not
                             set, multiple-statement execution is
                             disabled. See the note following this table
                             for more information about this flag.
     `CLIENT_NO_SCHEMA'      Do not permit the DB_NAME.TBL_NAME.COL_NAME
                             syntax. This is for ODBC. It causes the
                             parser to generate an error if you use that
                             syntax, which is useful for trapping bugs
                             in some ODBC programs.
     `CLIENT_ODBC'           Unused.
     `CLIENT_SSL'            Use SSL (encrypted protocol). Do not set
                             this option within an application program;
                             it is set internally in the client library.
                             Instead, use *Note `mysql_ssl_set()':
                             mysql-ssl-set.  before calling *Note
                             `mysql_real_connect()': mysql-real-connect.
     `CLIENT_REMEMBER_OPTIONS'Remember options specified by calls to
                             *Note `mysql_options()': mysql-options.
                             Without this option, if *Note
                             `mysql_real_connect()': mysql-real-connect.
                             fails, you must repeat the *Note
                             `mysql_options()': mysql-options.  calls
                             before trying to connect again. With this
                             option, the *Note `mysql_options()':
                             mysql-options.  calls need not be repeated.

If your program uses *Note `CALL': call.  statements to execute stored
procedures, the `CLIENT_MULTI_RESULTS' flag must be enabled.  This is
because each *Note `CALL': call. returns a result to indicate the call
status, in addition to any result sets that might be returned by
statements executed within the procedure. Because *Note `CALL': call.
can return multiple results, process them using a loop that calls *Note
`mysql_next_result()': mysql-next-result. to determine whether there
are more results.

`CLIENT_MULTI_RESULTS' can be enabled when you call *Note
`mysql_real_connect()': mysql-real-connect, either explicitly by
passing the `CLIENT_MULTI_RESULTS' flag itself, or implicitly by
passing `CLIENT_MULTI_STATEMENTS' (which also enables
`CLIENT_MULTI_RESULTS'). As of MySQL 5.5.3, `CLIENT_MULTI_RESULTS' is
enabled by default.

If you enable `CLIENT_MULTI_STATEMENTS' or `CLIENT_MULTI_RESULTS', you
should process the result for every call to *Note `mysql_query()':
mysql-query. or *Note `mysql_real_query()': mysql-real-query. by using a
loop that calls *Note `mysql_next_result()': mysql-next-result. to
determine whether there are more results. For an example, see *Note
c-api-multiple-queries::.

For some parameters, it is possible to have the value taken from an
option file rather than from an explicit value in the *Note
`mysql_real_connect()': mysql-real-connect. call. To do this, call
*Note `mysql_options()': mysql-options. with the
`MYSQL_READ_DEFAULT_FILE' or `MYSQL_READ_DEFAULT_GROUP' option before
calling *Note `mysql_real_connect()': mysql-real-connect.  Then, in the
*Note `mysql_real_connect()': mysql-real-connect. call, specify the
`no-value' value for each parameter to be read from an option file:

   * For `host', specify a value of `NULL' or the empty string (`""').

   * For `user', specify a value of `NULL' or the empty string.

   * For `passwd', specify a value of `NULL'. (For the password, a
     value of the empty string in the *Note `mysql_real_connect()':
     mysql-real-connect. call cannot be overridden in an option file,
     because the empty string indicates explicitly that the MySQL
     account must have an empty password.)

   * For `db', specify a value of `NULL' or the empty string.

   * For `port', specify a value of 0.

   * For `unix_socket', specify a value of `NULL'.

If no value is found in an option file for a parameter, its default
value is used as indicated in the descriptions given earlier in this
section.

* Return Values *

A `MYSQL*' connection handle if the connection was successful, `NULL'
if the connection was unsuccessful. For a successful connection, the
return value is the same as the value of the first parameter.

* Errors *

   * `CR_CONN_HOST_ERROR'

     Failed to connect to the MySQL server.

   * `CR_CONNECTION_ERROR'

     Failed to connect to the local MySQL server.

   * `CR_IPSOCK_ERROR'

     Failed to create an IP socket.

   * `CR_OUT_OF_MEMORY'

     Out of memory.

   * `CR_SOCKET_CREATE_ERROR'

     Failed to create a Unix socket.

   * `CR_UNKNOWN_HOST'

     Failed to find the IP address for the host name.

   * `CR_VERSION_ERROR'

     A protocol mismatch resulted from attempting to connect to a
     server with a client library that uses a different protocol
     version.

   * `CR_NAMEDPIPEOPEN_ERROR'

     Failed to create a named pipe on Windows.

   * `CR_NAMEDPIPEWAIT_ERROR'

     Failed to wait for a named pipe on Windows.

   * `CR_NAMEDPIPESETSTATE_ERROR'

     Failed to get a pipe handler on Windows.

   * `CR_SERVER_LOST'

     If `connect_timeout' > 0 and it took longer than `connect_timeout'
     seconds to connect to the server or if the server died while
     executing the `init-command'.

   * `CR_ALREADY_CONNECTED'

     The `MYSQL' connection handle is already connected.

* Example *

     MYSQL mysql;

     mysql_init(&mysql);
     mysql_options(&mysql,MYSQL_READ_DEFAULT_GROUP,"your_prog_name");
     if (!mysql_real_connect(&mysql,"host","user","passwd","database",0,NULL,0))
     {
         fprintf(stderr, "Failed to connect to database: Error: %s\n",
               mysql_error(&mysql));
     }

By using *Note `mysql_options()': mysql-options. the MySQL library
reads the `[client]' and `[your_prog_name]' sections in the `my.cnf'
file which ensures that your program works, even if someone has set up
MySQL in some nonstandard way.

Note that upon connection, *Note `mysql_real_connect()':
mysql-real-connect. sets the `reconnect' flag (part of the `MYSQL'
structure) to a value of `1' in versions of the API older than 5.0.3, or
`0' in newer versions. A value of `1' for this flag indicates that if a
statement cannot be performed because of a lost connection, to try
reconnecting to the server before giving up. You can use the
`MYSQL_OPT_RECONNECT' option to *Note `mysql_options()': mysql-options.
to control reconnection behavior.


File: manual.info,  Node: mysql-real-escape-string,  Next: mysql-real-query,  Prev: mysql-real-connect,  Up: c-api-functions

22.8.7.53 `mysql_real_escape_string()'
......................................

`unsigned long mysql_real_escape_string(MYSQL *mysql, char *to, const
char *from, unsigned long length)'

Note that `mysql' must be a valid, open connection. This is needed
because the escaping depends on the character set in use by the server.

* Description *

This function is used to create a legal SQL string that you can use in
an SQL statement. See *Note string-literals::.

The string in `from' is encoded to an escaped SQL string, taking into
account the current character set of the connection. The result is
placed in `to' and a terminating null byte is appended. Characters
encoded are ``\'', ``''', ``"'', `NUL' (ASCII 0), ``\n'', ``\r'', and
Control+Z. Strictly speaking, MySQL requires only that backslash and
the quote character used to quote the string in the query be escaped.
*Note `mysql_real_escape_string()': mysql-real-escape-string.  quotes
the other characters to make them easier to read in log files. For
comparison, see the quoting rules for literal strings and the `QUOTE()'
SQL function in *Note string-literals::, and *Note string-functions::.

The string pointed to by `from' must be `length' bytes long. You must
allocate the `to' buffer to be at least `length*2+1' bytes long. (In
the worst case, each character may need to be encoded as using two
bytes, and you need room for the terminating null byte.) When *Note
`mysql_real_escape_string()': mysql-real-escape-string.  returns, the
contents of `to' is a null-terminated string. The return value is the
length of the encoded string, not including the terminating null
character.

If you need to change the character set of the connection, use the
*Note `mysql_set_character_set()': mysql-set-character-set.  function
rather than executing a `SET NAMES' (or `SET CHARACTER SET') statement.
*Note `mysql_set_character_set()': mysql-set-character-set. works like
`SET NAMES' but also affects the character set used by *Note
`mysql_real_escape_string()': mysql-real-escape-string, which `SET
NAMES' does not.

* Example *

     char query[1000],*end;

     end = strmov(query,"INSERT INTO test_table values(");
     *end++ = '\'';
     end += mysql_real_escape_string(&mysql, end,"What is this",12);
     *end++ = '\'';
     *end++ = ',';
     *end++ = '\'';
     end += mysql_real_escape_string(&mysql, end,"binary data: \0\r\n",16);
     *end++ = '\'';
     *end++ = ')';

     if (mysql_real_query(&mysql,query,(unsigned int) (end - query)))
     {
        fprintf(stderr, "Failed to insert row, Error: %s\n",
                mysql_error(&mysql));
     }

The `strmov()' function used in the example is included in the
`libmysqlclient' library and works like `strcpy()' but returns a
pointer to the terminating null of the first parameter.

* Return Values *

The length of the value placed into `to', not including the terminating
null character.

* Errors *

None.


File: manual.info,  Node: mysql-real-query,  Next: mysql-refresh,  Prev: mysql-real-escape-string,  Up: c-api-functions

22.8.7.54 `mysql_real_query()'
..............................

`int mysql_real_query(MYSQL *mysql, const char *stmt_str, unsigned long
length)'

* Description *

Executes the SQL statement pointed to by `stmt_str', a string `length'
bytes long. Normally, the string must consist of a single SQL statement
without a terminating semicolon (``;'') or `\g'.  If multiple-statement
execution has been enabled, the string can contain several statements
separated by semicolons. See *Note c-api-multiple-queries::.

*Note `mysql_query()': mysql-query. cannot be used for statements that
contain binary data; you must use *Note `mysql_real_query()':
mysql-real-query. instead.  (Binary data may contain the ``\0''
character, which *Note `mysql_query()': mysql-query. interprets as the
end of the statement string.) In addition, *Note `mysql_real_query()':
mysql-real-query. is faster than *Note `mysql_query()': mysql-query.
because it does not call `strlen()' on the statement string.

If you want to know whether the statement should return a result set,
you can use *Note `mysql_field_count()': mysql-field-count. to check for
this. See *Note mysql-field-count::.

* Return Values *

Zero if the statement was successful. Nonzero if an error occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: mysql-refresh,  Next: mysql-reload,  Prev: mysql-real-query,  Up: c-api-functions

22.8.7.55 `mysql_refresh()'
...........................

`int mysql_refresh(MYSQL *mysql, unsigned int options)'

* Description *

This function flushes tables or caches, or resets replication server
information. The connected user must have the `RELOAD' privilege.

The `options' argument is a bit mask composed from any combination of
the following values. Multiple values can be OR'ed together to perform
multiple operations with a single call.

   * `REFRESH_GRANT'

     Refresh the grant tables, like *Note `FLUSH PRIVILEGES': flush.

   * `REFRESH_LOG'

     Flush the logs, like *Note `FLUSH LOGS': flush.

   * `REFRESH_TABLES'

     Flush the table cache, like *Note `FLUSH TABLES': flush.

   * `REFRESH_HOSTS'

     Flush the host cache, like *Note `FLUSH HOSTS': flush.

   * `REFRESH_STATUS'

     Reset status variables, like *Note `FLUSH STATUS': flush.

   * `REFRESH_THREADS'

     Flush the thread cache.

   * `REFRESH_SLAVE'

     On a slave replication server, reset the master server information
     and restart the slave, like *Note `RESET SLAVE': reset-slave.

   * `REFRESH_MASTER'

     On a master replication server, remove the binary log files listed
     in the binary log index and truncate the index file, like *Note
     `RESET MASTER': reset-master.

* Return Values *

Zero for success. Nonzero if an error occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: mysql-reload,  Next: mysql-rollback,  Prev: mysql-refresh,  Up: c-api-functions

22.8.7.56 `mysql_reload()'
..........................

`int mysql_reload(MYSQL *mysql)'

* Description *

Asks the MySQL server to reload the grant tables. The connected user
must have the `RELOAD' privilege.

This function is deprecated. It is preferable to use *Note
`mysql_query()': mysql-query. to issue an SQL *Note `FLUSH PRIVILEGES':
flush. statement instead.

* Return Values *

Zero for success. Nonzero if an error occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: mysql-rollback,  Next: mysql-row-seek,  Prev: mysql-reload,  Up: c-api-functions

22.8.7.57 `mysql_rollback()'
............................

`my_bool mysql_rollback(MYSQL *mysql)'

* Description *

Rolls back the current transaction.

The action of this function is subject to the value of the
`completion_type' system variable. In particular, if the value of
`completion_type' is `RELEASE' (or 2), the server performs a release
after terminating a transaction and closes the client connection. Call
*Note `mysql_close()': mysql-close.  from the client program to close
the connection from the client side.

* Return Values *

Zero if successful. Nonzero if an error occurred.

* Errors *

None.


File: manual.info,  Node: mysql-row-seek,  Next: mysql-row-tell,  Prev: mysql-rollback,  Up: c-api-functions

22.8.7.58 `mysql_row_seek()'
............................

`MYSQL_ROW_OFFSET mysql_row_seek(MYSQL_RES *result, MYSQL_ROW_OFFSET
offset)'

* Description *

Sets the row cursor to an arbitrary row in a query result set.  The
`offset' value is a row offset, typically a value returned from *Note
`mysql_row_tell()': mysql-row-tell. or from *Note `mysql_row_seek()':
mysql-row-seek. This value is not a row number; to seek to a row within
a result set by number, use *Note `mysql_data_seek()': mysql-data-seek.
instead.

This function requires that the result set structure contains the
entire result of the query, so *Note `mysql_row_seek()':
mysql-row-seek. may be used only in conjunction with *Note
`mysql_store_result()': mysql-store-result, not with *Note
`mysql_use_result()': mysql-use-result.

* Return Values *

The previous value of the row cursor. This value may be passed to a
subsequent call to *Note `mysql_row_seek()': mysql-row-seek.

* Errors *

None.


File: manual.info,  Node: mysql-row-tell,  Next: mysql-select-db,  Prev: mysql-row-seek,  Up: c-api-functions

22.8.7.59 `mysql_row_tell()'
............................

`MYSQL_ROW_OFFSET mysql_row_tell(MYSQL_RES *result)'

* Description *

Returns the current position of the row cursor for the last *Note
`mysql_fetch_row()': mysql-fetch-row. This value can be used as an
argument to *Note `mysql_row_seek()': mysql-row-seek.

Use *Note `mysql_row_tell()': mysql-row-tell. only after *Note
`mysql_store_result()': mysql-store-result, not after *Note
`mysql_use_result()': mysql-use-result.

* Return Values *

The current offset of the row cursor.

* Errors *

None.


File: manual.info,  Node: mysql-select-db,  Next: mysql-set-character-set,  Prev: mysql-row-tell,  Up: c-api-functions

22.8.7.60 `mysql_select_db()'
.............................

`int mysql_select_db(MYSQL *mysql, const char *db)'

* Description *

Causes the database specified by `db' to become the default (current)
database on the connection specified by `mysql'. In subsequent queries,
this database is the default for table references that do not include an
explicit database specifier.

*Note `mysql_select_db()': mysql-select-db. fails unless the connected
user can be authenticated as having permission to use the database.

* Return Values *

Zero for success. Nonzero if an error occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: mysql-set-character-set,  Next: mysql-set-local-infile-default,  Prev: mysql-select-db,  Up: c-api-functions

22.8.7.61 `mysql_set_character_set()'
.....................................

`int mysql_set_character_set(MYSQL *mysql, const char *csname)'

* Description *

This function is used to set the default character set for the current
connection. The string `csname' specifies a valid character set name.
The connection collation becomes the default collation of the character
set. This function works like the `SET NAMES' statement, but also sets
the value of `mysql->charset', and thus affects the character set used
by *Note `mysql_real_escape_string()': mysql-real-escape-string.

* Return Values *

Zero for success. Nonzero if an error occurred.

* Example *

     MYSQL mysql;

     mysql_init(&mysql);
     if (!mysql_real_connect(&mysql,"host","user","passwd","database",0,NULL,0))
     {
         fprintf(stderr, "Failed to connect to database: Error: %s\n",
               mysql_error(&mysql));
     }

     if (!mysql_set_character_set(&mysql, "utf8"))
     {
         printf("New client character set: %s\n",
                mysql_character_set_name(&mysql));
     }


File: manual.info,  Node: mysql-set-local-infile-default,  Next: mysql-set-local-infile-handler,  Prev: mysql-set-character-set,  Up: c-api-functions

22.8.7.62 `mysql_set_local_infile_default()'
............................................

`void mysql_set_local_infile_default(MYSQL *mysql);'

* Description *

Sets the `LOAD LOCAL DATA INFILE' handler callback functions to the
defaults used internally by the C client library. The library calls
this function automatically if *Note
`mysql_set_local_infile_handler()': mysql-set-local-infile-handler.
has not been called or does not supply valid functions for each of its
callbacks.

* Return Values *

None.

* Errors *

None.


File: manual.info,  Node: mysql-set-local-infile-handler,  Next: mysql-set-server-option,  Prev: mysql-set-local-infile-default,  Up: c-api-functions

22.8.7.63 `mysql_set_local_infile_handler()'
............................................

`void mysql_set_local_infile_handler(MYSQL *mysql, int
(*local_infile_init)(void **, const char *, void *), int
(*local_infile_read)(void *, char *, unsigned int), void
(*local_infile_end)(void *), int (*local_infile_error)(void *, char*,
unsigned int), void *userdata);'

* Description *

This function installs callbacks to be used during the execution of
*Note `LOAD DATA LOCAL INFILE': load-data. statements. It enables
application programs to exert control over local (client-side) data
file reading. The arguments are the connection handler, a set of
pointers to callback functions, and a pointer to a data area that the
callbacks can use to share information.

To use *Note `mysql_set_local_infile_handler()':
mysql-set-local-infile-handler, you must write the following callback
functions:

     int
     local_infile_init(void **ptr, const char *filename, void *userdata);

The initialization function. This is called once to do any setup
necessary, open the data file, allocate data structures, and so forth.
The first `void**' argument is a pointer to a pointer. You can set the
pointer (that is, `*ptr') to a value that will be passed to each of the
other callbacks (as a `void*'). The callbacks can use this pointed-to
value to maintain state information. The `userdata' argument is the
same value that is passed to *Note `mysql_set_local_infile_handler()':
mysql-set-local-infile-handler.

The initialization function should return zero for success, nonzero for
an error.

     int
     local_infile_read(void *ptr, char *buf, unsigned int buf_len);

The data-reading function. This is called repeatedly to read the data
file. `buf' points to the buffer where the read data is stored, and
`buf_len' is the maximum number of bytes that the callback can read and
store in the buffer. (It can read fewer bytes, but should not read
more.)

The return value is the number of bytes read, or zero when no more data
could be read (this indicates EOF). Return a value less than zero if an
error occurs.

     void
     local_infile_end(void *ptr)

The termination function. This is called once after
`local_infile_read()' has returned zero (EOF) or an error. Within this
function, deallocate any memory allocated by `local_infile_init()' and
perform any other cleanup necessary. It is invoked even if the
initialization function returns an error.

     int
     local_infile_error(void *ptr,
                        char *error_msg,
                        unsigned int error_msg_len);

The error-handling function. This is called to get a textual error
message to return to the user in case any of your other functions
returns an error. `error_msg' points to the buffer into which the
message is written, and `error_msg_len' is the length of the buffer.
Write the message as a null-terminated string, at most
`error_msg_len'-1 bytes long.

The return value is the error number.

Typically, the other callbacks store the error message in the data
structure pointed to by `ptr', so that `local_infile_error()' can copy
the message from there into `error_msg'.

After calling *Note `mysql_set_local_infile_handler()':
mysql-set-local-infile-handler.  in your C code and passing pointers to
your callback functions, you can then issue a *Note `LOAD DATA LOCAL
INFILE': load-data. statement (for example, by using *Note
`mysql_query()': mysql-query.). The client library automatically
invokes your callbacks. The file name specified in *Note `LOAD DATA
LOCAL INFILE': load-data. will be passed as the second parameter to the
`local_infile_init()' callback.

* Return Values *

None.

* Errors *

None.


File: manual.info,  Node: mysql-set-server-option,  Next: mysql-shutdown,  Prev: mysql-set-local-infile-handler,  Up: c-api-functions

22.8.7.64 `mysql_set_server_option()'
.....................................

`int mysql_set_server_option(MYSQL *mysql, enum enum_mysql_set_option
option)'

* Description *

Enables or disables an option for the connection.  `option' can have
one of the following values.

This table lists options for *Note `mysql_set_server_option()':
mysql-set-server-option.  and provides a description of each option.

Option                               Description
`MYSQL_OPTION_MULTI_STATEMENTS_ON'   Enable multiple-statement support
`MYSQL_OPTION_MULTI_STATEMENTS_OFF'  Disable multiple-statement support

If you enable multiple-statement support, you should retrieve results
from calls to *Note `mysql_query()': mysql-query. or *Note
`mysql_real_query()': mysql-real-query. by using a loop that calls
*Note `mysql_next_result()': mysql-next-result. to determine whether
there are more results. For an example, see *Note
c-api-multiple-queries::.

Enabling multiple-statement support with
`MYSQL_OPTION_MULTI_STATEMENTS_ON' does not have quite the same effect
as enabling it by passing the `CLIENT_MULTI_STATEMENTS' flag to *Note
`mysql_real_connect()': mysql-real-connect.: `CLIENT_MULTI_STATEMENTS'
also enables `CLIENT_MULTI_RESULTS'. If you are using the *Note `CALL':
call. SQL statement in your programs, multiple-result support must be
enabled; this means that `MYSQL_OPTION_MULTI_STATEMENTS_ON' by itself
is insufficient to permit the use of *Note `CALL': call.

* Return Values *

Zero for success. Nonzero if an error occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `ER_UNKNOWN_COM_ERROR'

     The server didn't support *Note `mysql_set_server_option()':
     mysql-set-server-option.  (which is the case that the server is
     older than 4.1.1) or the server didn't support the option one
     tried to set.


File: manual.info,  Node: mysql-shutdown,  Next: mysql-sqlstate,  Prev: mysql-set-server-option,  Up: c-api-functions

22.8.7.65 `mysql_shutdown()'
............................

`int mysql_shutdown(MYSQL *mysql, enum mysql_enum_shutdown_level
shutdown_level)'

* Description *

Asks the database server to shut down. The connected user must have the
`SHUTDOWN' privilege.  MySQL 5.5 servers support only one type of
shutdown; `shutdown_level' must be equal to `SHUTDOWN_DEFAULT'.
Additional shutdown levels are planned to make it possible to choose
the desired level.  Dynamically linked executables which have been
compiled with older versions of the `libmysqlclient' headers and call
*Note `mysql_shutdown()': mysql-shutdown. need to be used with the old
`libmysqlclient' dynamic library.

The shutdown process is described in *Note server-shutdown::.

* Return Values *

Zero for success. Nonzero if an error occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: mysql-sqlstate,  Next: mysql-ssl-set,  Prev: mysql-shutdown,  Up: c-api-functions

22.8.7.66 `mysql_sqlstate()'
............................

`const char *mysql_sqlstate(MYSQL *mysql)'

* Description *

Returns a null-terminated string containing the SQLSTATE error code for
the most recently executed SQL statement. The error code consists of
five characters. `'00000'' means `no error.' The values are specified
by ANSI SQL and ODBC. For a list of possible values, see *Note
error-handling::.

SQLSTATE values returned by *Note `mysql_sqlstate()': mysql-sqlstate.
differ from MySQL-specific error numbers returned by *Note
`mysql_errno()': mysql-errno. For example, the *Note `mysql': mysql.
client program displays errors using the following format, where `1146'
is the *Note `mysql_errno()': mysql-errno. value and `'42S02'' is the
corresponding *Note `mysql_sqlstate()': mysql-sqlstate. value:

     shell> SELECT * FROM no_such_table;
     ERROR 1146 (42S02): Table 'test.no_such_table' doesn't exist

Not all MySQL error numbers are mapped to SQLSTATE error codes.  The
value `'HY000'' (general error) is used for unmapped error numbers.

If you call *Note `mysql_sqlstate()': mysql-sqlstate.  after *Note
`mysql_real_connect()': mysql-real-connect.  fails, *Note
`mysql_sqlstate()': mysql-sqlstate. might not return a useful value.
For example, this happens if a host is blocked by the server and the
connection is closed without any SQLSTATE value being sent to the
client.

* Return Values *

A null-terminated character string containing the SQLSTATE error code.

* See Also *

See *Note mysql-errno::, *Note mysql-error::, and *Note
mysql-stmt-sqlstate::.


File: manual.info,  Node: mysql-ssl-set,  Next: mysql-stat,  Prev: mysql-sqlstate,  Up: c-api-functions

22.8.7.67 `mysql_ssl_set()'
...........................

`my_bool mysql_ssl_set(MYSQL *mysql, const char *key, const char *cert,
const char *ca, const char *capath, const char *cipher)'

* Description *

*Note `mysql_ssl_set()': mysql-ssl-set. is used for establishing secure
connections using SSL. It must be called before *Note
`mysql_real_connect()': mysql-real-connect.

*Note `mysql_ssl_set()': mysql-ssl-set. does nothing unless SSL support
is enabled in the client library.

`mysql' is the connection handler returned from *Note `mysql_init()':
mysql-init. The other parameters are specified as follows:

   * `key' is the path name to the key file.

   * `cert' is the path name to the certificate file.

   * `ca' is the path name to the certificate authority file.

   * `capath' is the path name to a directory that contains trusted SSL
     CA certificates in PEM format.

   * `cipher' is a list of permissible ciphers to use for SSL
     encryption.

Any unused SSL parameters may be given as `NULL'.

* Return Values *

This function always returns `0'. If SSL setup is incorrect, *Note
`mysql_real_connect()': mysql-real-connect. returns an error when you
attempt to connect.


File: manual.info,  Node: mysql-stat,  Next: mysql-store-result,  Prev: mysql-ssl-set,  Up: c-api-functions

22.8.7.68 `mysql_stat()'
........................

`const char *mysql_stat(MYSQL *mysql)'

* Description *

Returns a character string containing information similar to that
provided by the *Note `mysqladmin status': mysqladmin.  command. This
includes uptime in seconds and the number of running threads,
questions, reloads, and open tables.

* Return Values *

A character string describing the server status.  `NULL' if an error
occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: mysql-store-result,  Next: mysql-thread-id,  Prev: mysql-stat,  Up: c-api-functions

22.8.7.69 `mysql_store_result()'
................................

`MYSQL_RES *mysql_store_result(MYSQL *mysql)'

* Description *

After invoking *Note `mysql_query()': mysql-query. or *Note
`mysql_real_query()': mysql-real-query, you must call *Note
`mysql_store_result()': mysql-store-result. or *Note
`mysql_use_result()': mysql-use-result. for every statement that
successfully produces a result set (*Note `SELECT': select, *Note
`SHOW': show, *Note `DESCRIBE': describe, *Note `EXPLAIN': explain,
*Note `CHECK TABLE': check-table, and so forth). You must also call
*Note `mysql_free_result()': mysql-free-result. after you are done with
the result set.

You don't have to call *Note `mysql_store_result()':
mysql-store-result. or *Note `mysql_use_result()': mysql-use-result.
for other statements, but it does not do any harm or cause any notable
performance degradation if you call *Note `mysql_store_result()':
mysql-store-result. in all cases. You can detect whether the statement
has a result set by checking whether *Note `mysql_store_result()':
mysql-store-result. returns a nonzero value (more about this later).

If you enable multiple-statement support, you should retrieve results
from calls to *Note `mysql_query()': mysql-query. or *Note
`mysql_real_query()': mysql-real-query. by using a loop that calls
*Note `mysql_next_result()': mysql-next-result. to determine whether
there are more results. For an example, see *Note
c-api-multiple-queries::.

If you want to know whether a statement should return a result set, you
can use *Note `mysql_field_count()': mysql-field-count. to check for
this. See *Note mysql-field-count::.

*Note `mysql_store_result()': mysql-store-result. reads the entire
result of a query to the client, allocates a `MYSQL_RES' structure, and
places the result into this structure.

*Note `mysql_store_result()': mysql-store-result. returns a null
pointer if the statement didn't return a result set (for example, if it
was an *Note `INSERT': insert.  statement).

*Note `mysql_store_result()': mysql-store-result. also returns a null
pointer if reading of the result set failed. You can check whether an
error occurred by checking whether *Note `mysql_error()': mysql-error.
returns a nonempty string, *Note `mysql_errno()': mysql-errno. returns
nonzero, or *Note `mysql_field_count()': mysql-field-count.  returns
zero.

An empty result set is returned if there are no rows returned.  (An
empty result set differs from a null pointer as a return value.)

After you have called *Note `mysql_store_result()': mysql-store-result.
and gotten back a result that isn't a null pointer, you can call *Note
`mysql_num_rows()': mysql-num-rows. to find out how many rows are in
the result set.

You can call *Note `mysql_fetch_row()': mysql-fetch-row.  to fetch rows
from the result set, or *Note `mysql_row_seek()': mysql-row-seek. and
*Note `mysql_row_tell()': mysql-row-tell. to obtain or set the current
row position within the result set.

See *Note null-mysql-store-result::.

* Return Values *

A `MYSQL_RES' result structure with the results. `NULL' (0) if an error
occurred.

* Errors *

*Note `mysql_store_result()': mysql-store-result. resets *Note
`mysql_error()': mysql-error. and *Note `mysql_errno()': mysql-errno.
if it succeeds.

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_OUT_OF_MEMORY'

     Out of memory.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: mysql-thread-id,  Next: mysql-use-result,  Prev: mysql-store-result,  Up: c-api-functions

22.8.7.70 `mysql_thread_id()'
.............................

`unsigned long mysql_thread_id(MYSQL *mysql)'

* Description *

Returns the thread ID of the current connection. This value can be used
as an argument to *Note `mysql_kill()': mysql-kill. to kill the thread.

If the connection is lost and you reconnect with *Note `mysql_ping()':
mysql-ping, the thread ID changes. This means you should not get the
thread ID and store it for later. You should get it when you need it.

*Note*:

This function does not work correctly if thread IDs become larger than
32 bits, which can occur on some systems. To avoid problems with *Note
`mysql_thread_id()': mysql-thread-id, do not use it. To get the
connection ID, execute a `SELECT CONNECTION_ID()' query and retrieve
the result.

* Return Values *

The thread ID of the current connection.

* Errors *

None.


File: manual.info,  Node: mysql-use-result,  Next: mysql-warning-count,  Prev: mysql-thread-id,  Up: c-api-functions

22.8.7.71 `mysql_use_result()'
..............................

`MYSQL_RES *mysql_use_result(MYSQL *mysql)'

* Description *

After invoking *Note `mysql_query()': mysql-query. or *Note
`mysql_real_query()': mysql-real-query, you must call *Note
`mysql_store_result()': mysql-store-result. or *Note
`mysql_use_result()': mysql-use-result. for every statement that
successfully produces a result set (*Note `SELECT': select, *Note
`SHOW': show, *Note `DESCRIBE': describe, *Note `EXPLAIN': explain,
*Note `CHECK TABLE': check-table, and so forth). You must also call
*Note `mysql_free_result()': mysql-free-result. after you are done with
the result set.

*Note `mysql_use_result()': mysql-use-result. initiates a result set
retrieval but does not actually read the result set into the client like
*Note `mysql_store_result()': mysql-store-result. does.  Instead, each
row must be retrieved individually by making calls to *Note
`mysql_fetch_row()': mysql-fetch-row. This reads the result of a query
directly from the server without storing it in a temporary table or
local buffer, which is somewhat faster and uses much less memory than
*Note `mysql_store_result()': mysql-store-result. The client allocates
memory only for the current row and a communication buffer that may
grow up to `max_allowed_packet' bytes.

On the other hand, you shouldn't use *Note `mysql_use_result()':
mysql-use-result. if you are doing a lot of processing for each row on
the client side, or if the output is sent to a screen on which the user
may type a `^S' (stop scroll). This ties up the server and prevent
other threads from updating any tables from which the data is being
fetched.

When using *Note `mysql_use_result()': mysql-use-result, you must
execute *Note `mysql_fetch_row()': mysql-fetch-row. until a `NULL'
value is returned, otherwise, the unfetched rows are returned as part
of the result set for your next query. The C API gives the error
`Commands out of sync; you can't run this command now' if you forget to
do this!

You may not use *Note `mysql_data_seek()': mysql-data-seek, *Note
`mysql_row_seek()': mysql-row-seek, *Note `mysql_row_tell()':
mysql-row-tell, *Note `mysql_num_rows()': mysql-num-rows, or *Note
`mysql_affected_rows()': mysql-affected-rows. with a result returned
from *Note `mysql_use_result()': mysql-use-result, nor may you issue
other queries until *Note `mysql_use_result()': mysql-use-result. has
finished.  (However, after you have fetched all the rows, *Note
`mysql_num_rows()': mysql-num-rows. accurately returns the number of
rows fetched.)

You must call *Note `mysql_free_result()': mysql-free-result. once you
are done with the result set.

When using the `libmysqld' embedded server, the memory benefits are
essentially lost because memory usage incrementally increases with each
row retrieved until *Note `mysql_free_result()': mysql-free-result. is
called.

* Return Values *

A `MYSQL_RES' result structure.  `NULL' if an error occurred.

* Errors *

*Note `mysql_use_result()': mysql-use-result. resets *Note
`mysql_error()': mysql-error. and *Note `mysql_errno()': mysql-errno.
if it succeeds.

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_OUT_OF_MEMORY'

     Out of memory.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: mysql-warning-count,  Prev: mysql-use-result,  Up: c-api-functions

22.8.7.72 `mysql_warning_count()'
.................................

`unsigned int mysql_warning_count(MYSQL *mysql)'

* Description *

Returns the number of errors, warnings, and notes generated during
execution of the previous SQL statement.

* Return Values *

The warning count.

* Errors *

None.


File: manual.info,  Node: c-api-prepared-statements,  Next: c-api-prepared-statement-data-structures,  Prev: c-api-functions,  Up: c-api

22.8.8 C API Prepared Statements
--------------------------------

The MySQL client/server protocol provides for the use of prepared
statements. This capability uses the `MYSQL_STMT' statement handler
data structure returned by the *Note `mysql_stmt_init()':
mysql-stmt-init. initialization function. Prepared execution is an
efficient way to execute a statement more than once. The statement is
first parsed to prepare it for execution. Then it is executed one or
more times at a later time, using the statement handle returned by the
initialization function.

Prepared execution is faster than direct execution for statements
executed more than once, primarily because the query is parsed only
once. In the case of direct execution, the query is parsed every time
it is executed. Prepared execution also can provide a reduction of
network traffic because for each execution of the prepared statement,
it is necessary only to send the data for the parameters.

Prepared statements might not provide a performance increase in some
situations. For best results, test your application both with prepared
and nonprepared statements and choose whichever yields best performance.

Another advantage of prepared statements is that it uses a binary
protocol that makes data transfer between client and server more
efficient.

For a list of SQL statements that can be used as prepared statements,
see *Note sql-syntax-prepared-statements::.

Metadata changes to tables or views referred to by prepared statements
are detected and cause automatic repreparation of the statement when it
is next executed. For more information, see *Note
statement-repreparation::.


File: manual.info,  Node: c-api-prepared-statement-data-structures,  Next: c-api-prepared-statement-function-overview,  Prev: c-api-prepared-statements,  Up: c-api

22.8.9 C API Prepared Statement Data Structures
-----------------------------------------------

* Menu:

* c-api-prepared-statement-type-codes::  C API Prepared Statement Type Codes
* c-api-prepared-statement-type-conversions::  C API Prepared Statement Type Conversions

Prepared statements use several data structures:

   * To obtain a statement handle, pass a `MYSQL' connection handler to
     *Note `mysql_stmt_init()': mysql-stmt-init, which returns a
     pointer to a `MYSQL_STMT' data structure. This structure is used
     for further operations with the statement. To specify the
     statement to prepare, pass the `MYSQL_STMT' pointer and the
     statement string to *Note `mysql_stmt_prepare()':
     mysql-stmt-prepare.

   * To provide input parameters for a prepared statement, set up
     `MYSQL_BIND' structures and pass them to *Note
     `mysql_stmt_bind_param()': mysql-stmt-bind-param. To receive
     output column values, set up `MYSQL_BIND' structures and pass them
     to *Note `mysql_stmt_bind_result()': mysql-stmt-bind-result.

   * The `MYSQL_TIME' structure is used to transfer temporal data in
     both directions.

The following discussion describes the prepared statement data types in
detail. For examples that show how to use them, see *Note
mysql-stmt-execute::, and *Note mysql-stmt-fetch::.

   * `MYSQL_STMT'

     This structure is a handle for a prepared statement. A handle is
     created by calling *Note `mysql_stmt_init()': mysql-stmt-init,
     which returns a pointer to a `MYSQL_STMT'. The handle is used for
     all subsequent operations with the statement until you close it
     with *Note `mysql_stmt_close()': mysql-stmt-close, at which point
     the handle becomes invalid.

     The `MYSQL_STMT' structure has no members intended for application
     use. Applications should not try to copy a `MYSQL_STMT' structure.
     There is no guarantee that such a copy will be usable.

     Multiple statement handles can be associated with a single
     connection. The limit on the number of handles depends on the
     available system resources.

   * `MYSQL_BIND'

     This structure is used both for statement input (data values sent
     to the server) and output (result values returned from the server):

        * For input, use `MYSQL_BIND' structures with *Note
          `mysql_stmt_bind_param()': mysql-stmt-bind-param. to bind
          parameter data values to buffers for use by *Note
          `mysql_stmt_execute()': mysql-stmt-execute.

        * For output, use `MYSQL_BIND' structures with *Note
          `mysql_stmt_bind_result()': mysql-stmt-bind-result.  to bind
          buffers to result set columns, for use in fetching rows with
          *Note `mysql_stmt_fetch()': mysql-stmt-fetch.

     To use a `MYSQL_BIND' structure, zero its contents to initialize
     it, then set its members appropriately.  For example, to declare
     and initialize an array of three `MYSQL_BIND' structures, use this
     code:

          MYSQL_BIND bind[3];
          memset(bind, 0, sizeof(bind));

     The `MYSQL_BIND' structure contains the following members for use
     by application programs. For several of the members, the manner of
     use depends on whether the structure is used for input or output.

        * `enum enum_field_types buffer_type'

          The type of the buffer. This member indicates the data type
          of the C language variable bound to a statement parameter or
          result set column. For input, `buffer_type' indicates the
          type of the variable containing the value to be sent to the
          server.  For output, it indicates the type of the variable
          into which a value received from the server should be stored.
          For permissible `buffer_type' values, see *Note
          c-api-prepared-statement-type-codes::.

        * `void *buffer'

          A pointer to the buffer to be used for data transfer. This is
          the address of a C language variable.

          For input, `buffer' is a pointer to the variable in which you
          store the data value for a statement parameter. When you call
          *Note `mysql_stmt_execute()': mysql-stmt-execute, MySQL use
          the value stored in the variable in place of the
          corresponding parameter marker in the statement (specified
          with `?' in the statement string).

          For output, `buffer' is a pointer to the variable in which to
          return a result set column value.  When you call *Note
          `mysql_stmt_fetch()': mysql-stmt-fetch, MySQL stores a column
          value from the current row of the result set in this
          variable. You can access the value when the call returns.

          To minimize the need for MySQL to perform type conversions
          between C language values on the client side and SQL values
          on the server side, use C variables that have types similar
          to those of the corresponding SQL values:

             * For numeric data types, `buffer' should point to a
               variable of the proper numeric C type. For integer
               variables (which can be `char' for single-byte values or
               an integer type for larger values), you should also
               indicate whether the variable has the `unsigned'
               attribute by setting the `is_unsigned' member, described
               later.

             * For character (nonbinary) and binary string data types,
               `buffer' should point to a character buffer.

             * For date and time data types, `buffer' should point to a
               `MYSQL_TIME' structure.

          For guidelines about mapping between C types and SQL types
          and notes about type conversions, see *Note
          c-api-prepared-statement-type-codes::, and *Note
          c-api-prepared-statement-type-conversions::.

        * `unsigned long buffer_length'

          The actual size of `*buffer' in bytes.  This indicates the
          maximum amount of data that can be stored in the buffer. For
          character and binary C data, the `buffer_length' value
          specifies the length of `*buffer' when used with *Note
          `mysql_stmt_bind_param()': mysql-stmt-bind-param. to specify
          input values, or the maximum number of output data bytes that
          can be fetched into the buffer when used with *Note
          `mysql_stmt_bind_result()': mysql-stmt-bind-result.

        * `unsigned long *length'

          A pointer to an `unsigned long' variable that indicates the
          actual number of bytes of data stored in `*buffer'. `length'
          is used for character or binary C data.

          For input parameter data binding, set `*length' to indicate
          the actual length of the parameter value stored in `*buffer'.
          This is used by *Note `mysql_stmt_execute()':
          mysql-stmt-execute.

          For output value binding, MySQL sets `*length' when you call
          *Note `mysql_stmt_fetch()': mysql-stmt-fetch. The *Note
          `mysql_stmt_fetch()': mysql-stmt-fetch. return value
          determines how to interpret the length:

             * If the return value is 0, `*length' indicates the actual
               length of the parameter value.

             * If the return value is `MYSQL_DATA_TRUNCATED', `*length'
               indicates the nontruncated length of the parameter
               value. In this case, the minimum of `*length' and
               `buffer_length' indicates the actual length of the value.

          `length' is ignored for numeric and temporal data types
          because the `buffer_type' value determines the length of the
          data value.

          If you must determine the length of a returned value before
          fetching it, see *Note mysql-stmt-fetch::, for some
          strategies.

        * `my_bool *is_null'

          This member points to a `my_bool' variable that is true if a
          value is `NULL', false if it is not `NULL'. For input, set
          `*is_null' to true to indicate that you are passing a `NULL'
          value as a statement parameter.

          `is_null' is a _pointer_ to a boolean scalar, not a boolean
          scalar, to provide flexibility in how you specify `NULL'
          values:

             * If your data values are always `NULL', use
               `MYSQL_TYPE_NULL' as the `buffer_type' value when you
               bind the column. The other `MYSQL_BIND' members,
               including `is_null', do not matter.

             * If your data values are always `NOT NULL', set `is_null
               = (my_bool*) 0', and set the other members appropriately
               for the variable you are binding.

             * In all other cases, set the other members appropriately
               and set `is_null' to the address of a `my_bool' variable.
               Set that variable's value to true or false appropriately
               between executions to indicate whether the corresponding
               data value is `NULL' or `NOT NULL', respectively.

          For output, when you fetch a row, MySQL sets the value
          pointed to by `is_null' to true or false according to whether
          the result set column value returned from the statement is or
          is not `NULL'.

        * `my_bool is_unsigned'

          This member applies for C variables with data types that can
          be `unsigned' (`char', `short int', `int', `long long int').
          Set `is_unsigned' to true if the variable pointed to by
          `buffer' is `unsigned' and false otherwise. For example, if
          you bind a `signed char' variable to `buffer', specify a type
          code of `MYSQL_TYPE_TINY' and set `is_unsigned' to false. If
          you bind an `unsigned char' instead, the type code is the
          same but `is_unsigned' should be true. (For `char', it is not
          defined whether it is signed or unsigned, so it is best to be
          explicit about signedness by using `signed char' or `unsigned
          char'.)

          `is_unsigned' applies only to the C language variable on the
          client side. It indicates nothing about the signedness of the
          corresponding SQL value on the server side. For example, if
          you use an `int' variable to supply a value for a `BIGINT
          UNSIGNED' column, `is_unsigned' should be false because `int'
          is a signed type. If you use an `unsigned int' variable to
          supply a value for a *Note `BIGINT': integer-types. column,
          `is_unsigned' should be true because `unsigned int' is an
          unsigned type. MySQL performs the proper conversion between
          signed and unsigned values in both directions, although a
          warning occurs if truncation results.

        * `my_bool *error'

          For output, set this member to point to a `my_bool' variable
          to have truncation information for the parameter stored there
          after a row fetching operation. When truncation reporting is
          enabled, *Note `mysql_stmt_fetch()': mysql-stmt-fetch. returns
          `MYSQL_DATA_TRUNCATED' and `*error' is true in the
          `MYSQL_BIND' structures for parameters in which truncation
          occurred. Truncation indicates loss of sign or significant
          digits, or that a string was too long to fit in a column.
          Truncation reporting is enabled by default, but can be
          controlled by calling *Note `mysql_options()': mysql-options.
          with the `MYSQL_REPORT_DATA_TRUNCATION' option.

   * `MYSQL_TIME'

     This structure is used to send and receive *Note `DATE': datetime,
     *Note `TIME': time, *Note `DATETIME': datetime, and *Note
     `TIMESTAMP': datetime. data directly to and from the server. Set
     the `buffer' member to point to a `MYSQL_TIME' structure, and set
     the `buffer_type' member of a `MYSQL_BIND' structure to one of the
     temporal types (`MYSQL_TYPE_TIME', `MYSQL_TYPE_DATE',
     `MYSQL_TYPE_DATETIME', `MYSQL_TYPE_TIMESTAMP').

     The `MYSQL_TIME' structure contains the members listed in the
     following table.

     This table lists members of the `MYSQL_TIME' structure and
     provides a description of each member.

     Member                      Description
     `unsigned int year'         The year
     `unsigned int month'        The month of the year
     `unsigned int day'          The day of the month
     `unsigned int hour'         The hour of the day
     `unsigned int minute'       The minute of the hour
     `unsigned int second'       The second of the minute
     `my_bool neg'               A boolean flag indicating whether the
                                 time is negative
     `unsigned long second_part' The fractional part of the second in
                                 microseconds; currently unused

     Only those parts of a `MYSQL_TIME' structure that apply to a given
     type of temporal value are used. The `year', `month', and `day'
     elements are used for *Note `DATE': datetime, *Note `DATETIME':
     datetime, and *Note `TIMESTAMP': datetime. values. The `hour',
     `minute', and `second' elements are used for *Note `TIME': time,
     *Note `DATETIME': datetime, and *Note `TIMESTAMP': datetime.
     values. See *Note c-api-prepared-statement-date-handling::.


File: manual.info,  Node: c-api-prepared-statement-type-codes,  Next: c-api-prepared-statement-type-conversions,  Prev: c-api-prepared-statement-data-structures,  Up: c-api-prepared-statement-data-structures

22.8.9.1 C API Prepared Statement Type Codes
............................................

The `buffer_type' member of `MYSQL_BIND' structures indicates the data
type of the C language variable bound to a statement parameter or
result set column. For input, `buffer_type' indicates the type of the
variable containing the value to be sent to the server. For output, it
indicates the type of the variable into which a value received from the
server should be stored.

The following table shows the permissible values for the `buffer_type'
member of `MYSQL_BIND' structures for input values sent to the server.
The table shows the C variable types that you can use, the
corresponding type codes, and the SQL data types for which the supplied
value can be used without conversion. Choose the `buffer_type' value
according to the data type of the C language variable that you are
binding. For the integer types, you should also set the `is_unsigned'
member to indicate whether the variable is signed or unsigned.

This table lists C type input variables, corresponding `buffer_type'
values, and the SQL data types for which the supplied value can be used
without conversion.

Input Variable C Type  `buffer_type' Value       SQL Type of Destination
                                                 Value
`signed char'          `MYSQL_TYPE_TINY'         *Note `TINYINT':
                                                 integer-types.
`short int'            `MYSQL_TYPE_SHORT'        *Note `SMALLINT':
                                                 integer-types.
`int'                  `MYSQL_TYPE_LONG'         *Note `INT':
                                                 integer-types.
`long long int'        `MYSQL_TYPE_LONGLONG'     *Note `BIGINT':
                                                 integer-types.
`float'                `MYSQL_TYPE_FLOAT'        *Note `FLOAT':
                                                 floating-point-types.
`double'               `MYSQL_TYPE_DOUBLE'       *Note `DOUBLE':
                                                 floating-point-types.
`MYSQL_TIME'           `MYSQL_TYPE_TIME'         *Note `TIME': time.
`MYSQL_TIME'           `MYSQL_TYPE_DATE'         *Note `DATE': datetime.
`MYSQL_TIME'           `MYSQL_TYPE_DATETIME'     *Note `DATETIME':
                                                 datetime.
`MYSQL_TIME'           `MYSQL_TYPE_TIMESTAMP'    *Note `TIMESTAMP':
                                                 datetime.
`char[]'               `MYSQL_TYPE_STRING'       *Note `TEXT': blob,
                                                 *Note `CHAR': char,
                                                 *Note `VARCHAR': char.
`char[]'               `MYSQL_TYPE_BLOB'         *Note `BLOB': blob,
                                                 *Note `BINARY':
                                                 binary-varbinary, *Note
                                                 `VARBINARY':
                                                 binary-varbinary.
                       `MYSQL_TYPE_NULL'         `NULL'

Use `MYSQL_TYPE_NULL' as indicated in the description for the `is_null'
member in *Note c-api-prepared-statement-data-structures::.

For input string data, use `MYSQL_TYPE_STRING' or `MYSQL_TYPE_BLOB'
depending on whether the value is a character (nonbinary) or binary
string:

   * `MYSQL_TYPE_STRING' indicates character input string data. The
     value is assumed to be in the character set indicated by the
     `character_set_client' system variable. If the server stores the
     value into a column with a different character set, it converts
     the value to that character set.

   * `MYSQL_TYPE_BLOB' indicates binary input string data. The value is
     treated as having the `binary' character set. That is, it is
     treated as a byte string and no conversion occurs.

The following table shows the permissible values for the `buffer_type'
member of `MYSQL_BIND' structures for output values received from the
server. The table shows the SQL types of received values, the
corresponding type codes that such values have in result set metadata,
and the recommended C language data types to bind to the `MYSQL_BIND'
structure to receive the SQL values without conversion. Choose the
`buffer_type' value according to the data type of the C language
variable that you are binding. For the integer types, you should also
set the `is_unsigned' member to indicate whether the variable is signed
or unsigned.

This table shows SQL types of received values, corresponding
`buffer_type' values, and recommended C data type output variables.

SQL Type of Received   `buffer_type' Value       Output Variable C Type
Value                                            
*Note `TINYINT':       `MYSQL_TYPE_TINY'         `signed char'
integer-types.                                   
*Note `SMALLINT':      `MYSQL_TYPE_SHORT'        `short int'
integer-types.                                   
*Note `MEDIUMINT':     `MYSQL_TYPE_INT24'        `int'
integer-types.                                   
*Note `INT':           `MYSQL_TYPE_LONG'         `int'
integer-types.                                   
*Note `BIGINT':        `MYSQL_TYPE_LONGLONG'     `long long int'
integer-types.                                   
*Note `FLOAT':         `MYSQL_TYPE_FLOAT'        `float'
floating-point-types.                            
*Note `DOUBLE':        `MYSQL_TYPE_DOUBLE'       `double'
floating-point-types.                            
*Note `DECIMAL':       `MYSQL_TYPE_NEWDECIMAL'   `char[]'
fixed-point-types.                               
*Note `YEAR': year.    `MYSQL_TYPE_SHORT'        `short int'
*Note `TIME': time.    `MYSQL_TYPE_TIME'         `MYSQL_TIME'
*Note `DATE':          `MYSQL_TYPE_DATE'         `MYSQL_TIME'
datetime.                                        
*Note `DATETIME':      `MYSQL_TYPE_DATETIME'     `MYSQL_TIME'
datetime.                                        
*Note `TIMESTAMP':     `MYSQL_TYPE_TIMESTAMP'    `MYSQL_TIME'
datetime.                                        
*Note `CHAR': char,    `MYSQL_TYPE_STRING'       `char[]'
*Note `BINARY':                                  
binary-varbinary.                                
*Note `VARCHAR': char, `MYSQL_TYPE_VAR_STRING'   `char[]'
*Note `VARBINARY':                               
binary-varbinary.                                
*Note `TINYBLOB':      `MYSQL_TYPE_TINY_BLOB'    `char[]'
blob, *Note                                      
`TINYTEXT': blob.                                
*Note `BLOB': blob,    `MYSQL_TYPE_BLOB'         `char[]'
*Note `TEXT': blob.                              
*Note `MEDIUMBLOB':    `MYSQL_TYPE_MEDIUM_BLOB'  `char[]'
blob, *Note                                      
`MEDIUMTEXT': blob.                              
*Note `LONGBLOB':      `MYSQL_TYPE_LONG_BLOB'    `char[]'
blob, *Note                                      
`LONGTEXT': blob.                                
*Note `BIT': bit-type. `MYSQL_TYPE_BIT'          `char[]'


File: manual.info,  Node: c-api-prepared-statement-type-conversions,  Prev: c-api-prepared-statement-type-codes,  Up: c-api-prepared-statement-data-structures

22.8.9.2 C API Prepared Statement Type Conversions
..................................................

Prepared statements transmit data between the client and server using C
language variables on the client side that correspond to SQL values on
the server side. If there is a mismatch between the C variable type on
the client side and the corresponding SQL value type on the server
side, MySQL performs implicit type conversions in both directions.

MySQL knows the type code for the SQL value on the server side.  The
`buffer_type' value in the `MYSQL_BIND' structure indicates the type
code of the C variable that holds the value on the client side. The two
codes together tell MySQL what conversion must be performed, if any.
Here are some examples:

   * If you use `MYSQL_TYPE_LONG' with an `int' variable to pass an
     integer value to the server that is to be stored into a *Note
     `FLOAT': floating-point-types. column, MySQL converts the value to
     floating-point format before storing it.

   * If you fetch an SQL *Note `MEDIUMINT': integer-types.  column
     value, but specify a `buffer_type' value of `MYSQL_TYPE_LONGLONG'
     and use a C variable of type `long long int' as the destination
     buffer, MySQL converts the *Note `MEDIUMINT': integer-types. value
     (which requires less than 8 bytes) for storage into the `long long
     int' (an 8-byte variable).

   * If you fetch a numeric column with a value of 255 into a `char[4]'
     character array and specify a `buffer_type' value of
     `MYSQL_TYPE_STRING', the resulting value in the array is a 4-byte
     string `'255\0''.

   * MySQL returns *Note `DECIMAL': fixed-point-types. values as the
     string representation of the original server-side value, which is
     why the corresponding C type is `char[]'. For example, `12.345' is
     returned to the client as `'12.345''. If you specify
     `MYSQL_TYPE_NEWDECIMAL' and bind a string buffer to the
     `MYSQL_BIND' structure, *Note `mysql_stmt_fetch()':
     mysql-stmt-fetch. stores the value in the buffer as a string
     without conversion. If instead you specify a numeric variable and
     type code, *Note `mysql_stmt_fetch()': mysql-stmt-fetch. converts
     the string-format *Note `DECIMAL': fixed-point-types.  value to
     numeric form.

   * For the `MYSQL_TYPE_BIT' type code, *Note `BIT': bit-type. values
     are returned into a string buffer, which is why the corresponding
     C type is `char[]'. The value represents a bit string that
     requires interpretation on the client side. To return the value as
     a type that is easier to deal with, you can cause the value to be
     cast to integer using either of the following types of expressions:

          SELECT bit_col + 0 FROM t
          SELECT CAST(bit_col AS UNSIGNED) FROM t

     To retrieve the value, bind an integer variable large enough to
     hold the value and specify the appropriate corresponding integer
     type code.

Before binding variables to the `MYSQL_BIND' structures that are to be
used for fetching column values, you can check the type codes for each
column of the result set. This might be desirable if you want to
determine which variable types would be best to use to avoid type
conversions. To get the type codes, call *Note
`mysql_stmt_result_metadata()': mysql-stmt-result-metadata.  after
executing the prepared statement with *Note `mysql_stmt_execute()':
mysql-stmt-execute. The metadata provides access to the type codes for
the result set as described in *Note mysql-stmt-result-metadata::, and
*Note c-api-data-structures::.

To determine whether output string values in a result set returned from
the server contain binary or nonbinary data, check whether the
`charsetnr' value of the result set metadata is 63 (see *Note
c-api-data-structures::). If so, the character set is `binary', which
indicates binary rather than nonbinary data. This enables you to
distinguish *Note `BINARY': binary-varbinary. from *Note `CHAR': char,
*Note `VARBINARY': binary-varbinary. from *Note `VARCHAR': char, and the
*Note `BLOB': blob. types from the *Note `TEXT': blob. types.

If you cause the `max_length' member of the `MYSQL_FIELD' column
metadata structures to be set (by calling *Note
`mysql_stmt_attr_set()': mysql-stmt-attr-set.), be aware that the
`max_length' values for the result set indicate the lengths of the
longest string representation of the result values, not the lengths of
the binary representation.  That is, `max_length' does not necessarily
correspond to the size of the buffers needed to fetch the values with
the binary protocol used for prepared statements. Choose the size of
the buffers according to the types of the variables into which you
fetch the values. For example, a `TINYINT' column containing the value
-128 might have a `max_length' value of 4. But the binary
representation of any `TINYINT' value requires only 1 byte for storage,
so you can supply a `signed char' variable in which to store the value
and set `is_unsigned' to indicate that values are signed.

Metadata changes to tables or views referred to by prepared statements
are detected and cause automatic repreparation of the statement when it
is next executed. For more information, see *Note
statement-repreparation::.


File: manual.info,  Node: c-api-prepared-statement-function-overview,  Next: c-api-prepared-statement-functions,  Prev: c-api-prepared-statement-data-structures,  Up: c-api

22.8.10 C API Prepared Statement Function Overview
--------------------------------------------------

The functions available for prepared statement processing are
summarized here and described in greater detail in a later section. See
*Note c-api-prepared-statement-functions::.

This table lists functions that are available for C API prepared
statement processing and provides a description of each function.

Function                Description
*Note                   Returns the number of rows changed, deleted, or
`mysql_stmt_affected_rows()':inserted by prepared *Note `UPDATE': update,
mysql-stmt-affected-rows.*Note `DELETE': delete, or *Note `INSERT':
                        insert. statement
*Note                   Gets value of an attribute for a prepared
`mysql_stmt_attr_get()':statement
mysql-stmt-attr-get.    
*Note                   Sets an attribute for a prepared statement
`mysql_stmt_attr_set()':
mysql-stmt-attr-set.    
*Note                   Associates application data buffers with the
`mysql_stmt_bind_param()':parameter markers in a prepared SQL statement
mysql-stmt-bind-param.  
*Note                   Associates application data buffers with columns
`mysql_stmt_bind_result()':in a result set
mysql-stmt-bind-result. 
*Note                   Frees memory used by a prepared statement
`mysql_stmt_close()':   
mysql-stmt-close.       
*Note                   Seeks to an arbitrary row number in a statement
`mysql_stmt_data_seek()':result set
mysql-stmt-data-seek.   
*Note                   Returns the error number for the last statement
`mysql_stmt_errno()':   execution
mysql-stmt-errno.       
*Note                   Returns the error message for the last statement
`mysql_stmt_error()':   execution
mysql-stmt-error.       
*Note                   Executes a prepared statement
`mysql_stmt_execute()': 
mysql-stmt-execute.     
*Note                   Fetches the next row of data from a result set
`mysql_stmt_fetch()':   and returns data for all bound columns
mysql-stmt-fetch.       
*Note                   Fetch data for one column of the current row of
`mysql_stmt_fetch_column()':a result set
mysql-stmt-fetch-column.
*Note                   Returns the number of result columns for the
`mysql_stmt_field_count()':most recent statement
mysql-stmt-field-count. 
*Note                   Free the resources allocated to a statement
`mysql_stmt_free_result()':handle
mysql-stmt-free-result. 
*Note                   Allocates memory for a `MYSQL_STMT' structure and
`mysql_stmt_init()':    initializes it
mysql-stmt-init.        
*Note                   Returns the ID generated for an `AUTO_INCREMENT'
`mysql_stmt_insert_id()':column by a prepared statement
mysql-stmt-insert-id.   
*Note                   Returns/initiates the next result in a
`mysql_stmt_next_result()':multiple-result execution
mysql-stmt-next-result. 
*Note                   Returns the row count from a buffered statement
`mysql_stmt_num_rows()':result set
mysql-stmt-num-rows.    
*Note                   Returns the number of parameters in a prepared
`mysql_stmt_param_count()':statement
mysql-stmt-param-count. 
*Note                   (Return parameter metadata in the form of a
`mysql_stmt_param_metadata()':result set) Currently, this function does nothing
mysql-stmt-param-metadata.
*Note                   Prepares an SQL statement string for execution
`mysql_stmt_prepare()': 
mysql-stmt-prepare.     
*Note                   Resets the statement buffers in the server
`mysql_stmt_reset()':   
mysql-stmt-reset.       
*Note                   Returns prepared statement metadata in the form
`mysql_stmt_result_metadata()':of a result set
mysql-stmt-result-metadata.
*Note                   Seeks to a row offset in a statement result set,
`mysql_stmt_row_seek()':using value returned from *Note
mysql-stmt-row-seek.    `mysql_stmt_row_tell()': mysql-stmt-row-tell.
*Note                   Returns the statement row cursor position
`mysql_stmt_row_tell()':
mysql-stmt-row-tell.    
*Note                   Sends long data in chunks to server
`mysql_stmt_send_long_data()':
mysql-stmt-send-long-data.
*Note                   Returns the SQLSTATE error code for the last
`mysql_stmt_sqlstate()':statement execution
mysql-stmt-sqlstate.    
*Note                   Retrieves a complete result set to the client
`mysql_stmt_store_result()':
mysql-stmt-store-result.

Call *Note `mysql_stmt_init()': mysql-stmt-init. to create a statement
handle, then *Note `mysql_stmt_prepare()': mysql-stmt-prepare. to
prepare the statement string, *Note `mysql_stmt_bind_param()':
mysql-stmt-bind-param. to supply the parameter data, and *Note
`mysql_stmt_execute()': mysql-stmt-execute. to execute the statement.
You can repeat the *Note `mysql_stmt_execute()': mysql-stmt-execute. by
changing parameter values in the respective buffers supplied through
*Note `mysql_stmt_bind_param()': mysql-stmt-bind-param.

You can send text or binary data in chunks to server using *Note
`mysql_stmt_send_long_data()': mysql-stmt-send-long-data. See *Note
mysql-stmt-send-long-data::.

If the statement is a *Note `SELECT': select. or any other statement
that produces a result set, *Note `mysql_stmt_prepare()':
mysql-stmt-prepare. also returns the result set metadata information in
the form of a `MYSQL_RES' result set through *Note
`mysql_stmt_result_metadata()': mysql-stmt-result-metadata.

You can supply the result buffers using *Note
`mysql_stmt_bind_result()': mysql-stmt-bind-result, so that the *Note
`mysql_stmt_fetch()': mysql-stmt-fetch.  automatically returns data to
these buffers. This is row-by-row fetching.

When statement execution has been completed, close the statement handle
using *Note `mysql_stmt_close()': mysql-stmt-close. so that all
resources associated with it can be freed.

If you obtained a *Note `SELECT': select.  statement's result set
metadata by calling *Note `mysql_stmt_result_metadata()':
mysql-stmt-result-metadata, you should also free the metadata using
*Note `mysql_free_result()': mysql-free-result.

* Execution Steps *

To prepare and execute a statement, an application follows these steps:

  1. Create a prepared statement handle with *Note `mysql_stmt_init()':
     mysql-stmt-init. To prepare the statement on the server, call
     *Note `mysql_stmt_prepare()': mysql-stmt-prepare. and pass it a
     string containing the SQL statement.

  2. If the statement will produce a result set, call *Note
     `mysql_stmt_result_metadata()': mysql-stmt-result-metadata.  to
     obtain the result set metadata. This metadata is itself in the
     form of result set, albeit a separate one from the one that
     contains the rows returned by the query. The metadata result set
     indicates how many columns are in the result and contains
     information about each column.

  3. Set the values of any parameters using *Note
     `mysql_stmt_bind_param()': mysql-stmt-bind-param. All parameters
     must be set. Otherwise, statement execution returns an error or
     produces unexpected results.

  4. Call *Note `mysql_stmt_execute()': mysql-stmt-execute. to execute
     the statement.

  5. If the statement produces a result set, bind the data buffers to
     use for retrieving the row values by calling *Note
     `mysql_stmt_bind_result()': mysql-stmt-bind-result.

  6. Fetch the data into the buffers row by row by calling *Note
     `mysql_stmt_fetch()': mysql-stmt-fetch. repeatedly until no more
     rows are found.

  7. Repeat steps 3 through 6 as necessary, by changing the parameter
     values and re-executing the statement.

When *Note `mysql_stmt_prepare()': mysql-stmt-prepare. is called, the
MySQL client/server protocol performs these actions:

   * The server parses the statement and sends the okay status back to
     the client by assigning a statement ID. It also sends total number
     of parameters, a column count, and its metadata if it is a result
     set oriented statement. All syntax and semantics of the statement
     are checked by the server during this call.

   * The client uses this statement ID for the further operations, so
     that the server can identify the statement from among its pool of
     statements.

When *Note `mysql_stmt_execute()': mysql-stmt-execute. is called, the
MySQL client/server protocol performs these actions:

   * The client uses the statement handle and sends the parameter data
     to the server.

   * The server identifies the statement using the ID provided by the
     client, replaces the parameter markers with the newly supplied
     data, and executes the statement. If the statement produces a
     result set, the server sends the data back to the client.
     Otherwise, it sends an okay status and the number of rows changed,
     deleted, or inserted.

When *Note `mysql_stmt_fetch()': mysql-stmt-fetch. is called, the MySQL
client/server protocol performs these actions:

   * The client reads the data from the current row of the result set
     and places it into the application data buffers by doing the
     necessary conversions. If the application buffer type is same as
     that of the field type returned from the server, the conversions
     are straightforward.

If an error occurs, you can get the statement error number, error
message, and SQLSTATE code using *Note `mysql_stmt_errno()':
mysql-stmt-errno, *Note `mysql_stmt_error()': mysql-stmt-error, and
*Note `mysql_stmt_sqlstate()': mysql-stmt-sqlstate, respectively.

* Prepared Statement Logging *

For prepared statements that are executed with the *Note
`mysql_stmt_prepare()': mysql-stmt-prepare. and *Note
`mysql_stmt_execute()': mysql-stmt-execute. C API functions, the server
writes `Prepare' and `Execute' lines to the general query log so that
you can tell when statements are prepared and executed.

Suppose that you prepare and execute a statement as follows:

  1. Call *Note `mysql_stmt_prepare()': mysql-stmt-prepare. to prepare
     the statement string `"SELECT ?"'.

  2. Call *Note `mysql_stmt_bind_param()': mysql-stmt-bind-param.  to
     bind the value `3' to the parameter in the prepared statement.

  3. Call *Note `mysql_stmt_execute()': mysql-stmt-execute. to execute
     the prepared statement.

As a result of the preceding calls, the server writes the following
lines to the general query log:

     Prepare  [1] SELECT ?
     Execute  [1] SELECT 3

Each `Prepare' and `Execute' line in the log is tagged with a `[N]'
statement identifier so that you can keep track of which prepared
statement is being logged. N is a positive integer. If there are
multiple prepared statements active simultaneously for the client, N
may be greater than 1. Each `Execute' lines shows a prepared statement
after substitution of data values for `?' parameters.


File: manual.info,  Node: c-api-prepared-statement-functions,  Next: c-api-thread-functions,  Prev: c-api-prepared-statement-function-overview,  Up: c-api

22.8.11 C API Prepared Statement Function Descriptions
------------------------------------------------------

* Menu:

* mysql-stmt-affected-rows::     `mysql_stmt_affected_rows()'
* mysql-stmt-attr-get::          `mysql_stmt_attr_get()'
* mysql-stmt-attr-set::          `mysql_stmt_attr_set()'
* mysql-stmt-bind-param::        `mysql_stmt_bind_param()'
* mysql-stmt-bind-result::       `mysql_stmt_bind_result()'
* mysql-stmt-close::             `mysql_stmt_close()'
* mysql-stmt-data-seek::         `mysql_stmt_data_seek()'
* mysql-stmt-errno::             `mysql_stmt_errno()'
* mysql-stmt-error::             `mysql_stmt_error()'
* mysql-stmt-execute::           `mysql_stmt_execute()'
* mysql-stmt-fetch::             `mysql_stmt_fetch()'
* mysql-stmt-fetch-column::      `mysql_stmt_fetch_column()'
* mysql-stmt-field-count::       `mysql_stmt_field_count()'
* mysql-stmt-free-result::       `mysql_stmt_free_result()'
* mysql-stmt-init::              `mysql_stmt_init()'
* mysql-stmt-insert-id::         `mysql_stmt_insert_id()'
* mysql-stmt-next-result::       `mysql_stmt_next_result()'
* mysql-stmt-num-rows::          `mysql_stmt_num_rows()'
* mysql-stmt-param-count::       `mysql_stmt_param_count()'
* mysql-stmt-param-metadata::    `mysql_stmt_param_metadata()'
* mysql-stmt-prepare::           `mysql_stmt_prepare()'
* mysql-stmt-reset::             `mysql_stmt_reset()'
* mysql-stmt-result-metadata::   `mysql_stmt_result_metadata()'
* mysql-stmt-row-seek::          `mysql_stmt_row_seek()'
* mysql-stmt-row-tell::          `mysql_stmt_row_tell()'
* mysql-stmt-send-long-data::    `mysql_stmt_send_long_data()'
* mysql-stmt-sqlstate::          `mysql_stmt_sqlstate()'
* mysql-stmt-store-result::      `mysql_stmt_store_result()'

To prepare and execute queries, use the functions described in detail
in the following sections.

All functions that operate with a `MYSQL_STMT' structure begin with the
prefix `mysql_stmt_'.

To create a `MYSQL_STMT' handle, use the *Note `mysql_stmt_init()':
mysql-stmt-init. function.


File: manual.info,  Node: mysql-stmt-affected-rows,  Next: mysql-stmt-attr-get,  Prev: c-api-prepared-statement-functions,  Up: c-api-prepared-statement-functions

22.8.11.1 `mysql_stmt_affected_rows()'
......................................

`my_ulonglong mysql_stmt_affected_rows(MYSQL_STMT *stmt)'

* Description *

*Note `mysql_stmt_affected_rows()': mysql-stmt-affected-rows. may be
called immediately after executing a statement with *Note
`mysql_stmt_execute()': mysql-stmt-execute. It is like *Note
`mysql_affected_rows()': mysql-affected-rows. but for prepared
statements. For a description of what the affected-rows value returned
by this function means, See *Note mysql-affected-rows::.

* Errors *

None.

* Example *

See the Example in *Note mysql-stmt-execute::.


File: manual.info,  Node: mysql-stmt-attr-get,  Next: mysql-stmt-attr-set,  Prev: mysql-stmt-affected-rows,  Up: c-api-prepared-statement-functions

22.8.11.2 `mysql_stmt_attr_get()'
.................................

`my_bool mysql_stmt_attr_get(MYSQL_STMT *stmt, enum enum_stmt_attr_type
option, void *arg)'

* Description *

Can be used to get the current value for a statement attribute.

The `option' argument is the option that you want to get; the `arg'
should point to a variable that should contain the option value. If the
option is an integer, `arg' should point to the value of the integer.

See *Note mysql-stmt-attr-set::, for a list of options and option types.

* Return Values *

Zero if successful. Nonzero if `option' is unknown.

* Errors *

None.


File: manual.info,  Node: mysql-stmt-attr-set,  Next: mysql-stmt-bind-param,  Prev: mysql-stmt-attr-get,  Up: c-api-prepared-statement-functions

22.8.11.3 `mysql_stmt_attr_set()'
.................................

`my_bool mysql_stmt_attr_set(MYSQL_STMT *stmt, enum enum_stmt_attr_type
option, const void *arg)'

* Description *

Can be used to affect behavior for a prepared statement. This function
may be called multiple times to set several options.

The `option' argument is the option that you want to set. The `arg'
argument is the value for the option. `arg' should point to a variable
that is set to the desired attribute value. The variable type is as
indicated in the following table.

The following table shows the possible `option' values.

This table lists *Note `mysql_stmt_attr_set()': mysql-stmt-attr-set.
option values along with the argument type and function of each option.

Option                         Argument Type  Function
`STMT_ATTR_UPDATE_MAX_LENGTH'  `my_bool *'    If set to 1, causes *Note
                                              `mysql_stmt_store_result()':
                                              mysql-stmt-store-result.
                                              to update the metadata
                                              `MYSQL_FIELD->max_length'
                                              value.
`STMT_ATTR_CURSOR_TYPE'        `unsigned      Type of cursor to open for
                               long *'        statement when *Note
                                              `mysql_stmt_execute()':
                                              mysql-stmt-execute. is
                                              invoked. `*arg' can be
                                              `CURSOR_TYPE_NO_CURSOR'
                                              (the default) or
                                              `CURSOR_TYPE_READ_ONLY'.
`STMT_ATTR_PREFETCH_ROWS'      `unsigned      Number of rows to fetch
                               long *'        from server at a time when
                                              using a cursor.  `*arg'
                                              can be in the range from 1
                                              to the maximum value of
                                              `unsigned long'.  The
                                              default is 1.

If you use the `STMT_ATTR_CURSOR_TYPE' option with
`CURSOR_TYPE_READ_ONLY', a cursor is opened for the statement when you
invoke *Note `mysql_stmt_execute()': mysql-stmt-execute. If there is
already an open cursor from a previous *Note `mysql_stmt_execute()':
mysql-stmt-execute. call, it closes the cursor before opening a new one.
*Note `mysql_stmt_reset()': mysql-stmt-reset. also closes any open
cursor before preparing the statement for re-execution.  *Note
`mysql_stmt_free_result()': mysql-stmt-free-result. closes any open
cursor.

If you open a cursor for a prepared statement, *Note
`mysql_stmt_store_result()': mysql-stmt-store-result. is unnecessary,
because that function causes the result set to be buffered on the
client side.

* Return Values *

Zero if successful. Nonzero if `option' is unknown.

* Errors *

None.

* Example *

The following example opens a cursor for a prepared statement and sets
the number of rows to fetch at a time to 5:

     MYSQL_STMT *stmt;
     int rc;
     unsigned long type;
     unsigned long prefetch_rows = 5;

     stmt = mysql_stmt_init(mysql);
     type = (unsigned long) CURSOR_TYPE_READ_ONLY;
     rc = mysql_stmt_attr_set(stmt, STMT_ATTR_CURSOR_TYPE, (void*) &type);
     /* ... check return value ... */
     rc = mysql_stmt_attr_set(stmt, STMT_ATTR_PREFETCH_ROWS,
                              (void*) &prefetch_rows);
     /* ... check return value ... */


File: manual.info,  Node: mysql-stmt-bind-param,  Next: mysql-stmt-bind-result,  Prev: mysql-stmt-attr-set,  Up: c-api-prepared-statement-functions

22.8.11.4 `mysql_stmt_bind_param()'
...................................

`my_bool mysql_stmt_bind_param(MYSQL_STMT *stmt, MYSQL_BIND *bind)'

* Description *

*Note `mysql_stmt_bind_param()': mysql-stmt-bind-param. is used to bind
input data for the parameter markers in the SQL statement that was
passed to *Note `mysql_stmt_prepare()': mysql-stmt-prepare. It uses
`MYSQL_BIND' structures to supply the data.  `bind' is the address of
an array of `MYSQL_BIND' structures. The client library expects the
array to contain one element for each `?' parameter marker that is
present in the query.

Suppose that you prepare the following statement:

     INSERT INTO mytbl VALUES(?,?,?)

When you bind the parameters, the array of `MYSQL_BIND' structures must
contain three elements, and can be declared like this:

     MYSQL_BIND bind[3];

*Note c-api-prepared-statement-data-structures::, describes the members
of each `MYSQL_BIND' element and how they should be set to provide
input values.

* Return Values *

Zero if the bind operation was successful. Nonzero if an error occurred.

* Errors *

   * `CR_UNSUPPORTED_PARAM_TYPE'

     The conversion is not supported. Possibly the `buffer_type' value
     is invalid or is not one of the supported types.

   * `CR_OUT_OF_MEMORY'

     Out of memory.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.

* Example *

See the Example in *Note mysql-stmt-execute::.


File: manual.info,  Node: mysql-stmt-bind-result,  Next: mysql-stmt-close,  Prev: mysql-stmt-bind-param,  Up: c-api-prepared-statement-functions

22.8.11.5 `mysql_stmt_bind_result()'
....................................

`my_bool mysql_stmt_bind_result(MYSQL_STMT *stmt, MYSQL_BIND *bind)'

* Description *

*Note `mysql_stmt_bind_result()': mysql-stmt-bind-result. is used to
associate (that is, bind) output columns in the result set to data
buffers and length buffers. When *Note `mysql_stmt_fetch()':
mysql-stmt-fetch. is called to fetch data, the MySQL client/server
protocol places the data for the bound columns into the specified
buffers.

All columns must be bound to buffers prior to calling *Note
`mysql_stmt_fetch()': mysql-stmt-fetch.  `bind' is the address of an
array of `MYSQL_BIND' structures. The client library expects the array
to contain one element for each column of the result set. If you do not
bind columns to `MYSQL_BIND' structures, *Note `mysql_stmt_fetch()':
mysql-stmt-fetch. simply ignores the data fetch. The buffers should be
large enough to hold the data values, because the protocol doesn't
return data values in chunks.

A column can be bound or rebound at any time, even after a result set
has been partially retrieved. The new binding takes effect the next time
*Note `mysql_stmt_fetch()': mysql-stmt-fetch. is called.  Suppose that
an application binds the columns in a result set and calls *Note
`mysql_stmt_fetch()': mysql-stmt-fetch.  The client/server protocol
returns data in the bound buffers.  Then suppose that the application
binds the columns to a different set of buffers. The protocol places
data into the newly bound buffers when the next call to *Note
`mysql_stmt_fetch()': mysql-stmt-fetch. occurs.

To bind a column, an application calls *Note
`mysql_stmt_bind_result()': mysql-stmt-bind-result. and passes the
type, address, and length of the output buffer into which the value
should be stored.  *Note c-api-prepared-statement-data-structures::,
describes the members of each `MYSQL_BIND' element and how they should
be set to receive output values.

* Return Values *

Zero if the bind operation was successful. Nonzero if an error occurred.

* Errors *

   * `CR_UNSUPPORTED_PARAM_TYPE'

     The conversion is not supported. Possibly the `buffer_type' value
     is invalid or is not one of the supported types.

   * `CR_OUT_OF_MEMORY'

     Out of memory.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.

* Example *

See the Example in *Note mysql-stmt-fetch::.


File: manual.info,  Node: mysql-stmt-close,  Next: mysql-stmt-data-seek,  Prev: mysql-stmt-bind-result,  Up: c-api-prepared-statement-functions

22.8.11.6 `mysql_stmt_close()'
..............................

`my_bool mysql_stmt_close(MYSQL_STMT *)'

* Description *

Closes the prepared statement.  *Note `mysql_stmt_close()':
mysql-stmt-close. also deallocates the statement handle pointed to by
`stmt'.

If the current statement has pending or unread results, this function
cancels them so that the next query can be executed.

* Return Values *

Zero if the statement was freed successfully. Nonzero if an error
occurred.

* Errors *

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.

* Example *

See the Example in *Note mysql-stmt-execute::.


File: manual.info,  Node: mysql-stmt-data-seek,  Next: mysql-stmt-errno,  Prev: mysql-stmt-close,  Up: c-api-prepared-statement-functions

22.8.11.7 `mysql_stmt_data_seek()'
..................................

`void mysql_stmt_data_seek(MYSQL_STMT *stmt, my_ulonglong offset)'

* Description *

Seeks to an arbitrary row in a statement result set. The `offset' value
is a row number and should be in the range from `0' to *Note
`mysql_stmt_num_rows(stmt)-1': mysql-stmt-num-rows.

This function requires that the statement result set structure contains
the entire result of the last executed query, so *Note
`mysql_stmt_data_seek()': mysql-stmt-data-seek. may be used only in
conjunction with *Note `mysql_stmt_store_result()':
mysql-stmt-store-result.

* Return Values *

None.

* Errors *

None.


File: manual.info,  Node: mysql-stmt-errno,  Next: mysql-stmt-error,  Prev: mysql-stmt-data-seek,  Up: c-api-prepared-statement-functions

22.8.11.8 `mysql_stmt_errno()'
..............................

`unsigned int mysql_stmt_errno(MYSQL_STMT *stmt)'

* Description *

For the statement specified by `stmt', *Note `mysql_stmt_errno()':
mysql-stmt-errno. returns the error code for the most recently invoked
statement API function that can succeed or fail. A return value of zero
means that no error occurred. Client error message numbers are listed
in the MySQL `errmsg.h' header file. Server error message numbers are
listed in `mysqld_error.h'. Errors also are listed at *Note
error-handling::.

* Return Values *

An error code value. Zero if no error occurred.

* Errors *

None.


File: manual.info,  Node: mysql-stmt-error,  Next: mysql-stmt-execute,  Prev: mysql-stmt-errno,  Up: c-api-prepared-statement-functions

22.8.11.9 `mysql_stmt_error()'
..............................

`const char *mysql_stmt_error(MYSQL_STMT *stmt)'

* Description *

For the statement specified by `stmt', *Note `mysql_stmt_error()':
mysql-stmt-error. returns a null-terminated string containing the error
message for the most recently invoked statement API function that can
succeed or fail. An empty string (`""') is returned if no error
occurred. Either of these two tests can be used to check for an error:

     if(*mysql_stmt_errno(stmt))
     {
       // an error occurred
     }

     if (mysql_stmt_error(stmt)[0])
     {
       // an error occurred
     }

The language of the client error messages may be changed by recompiling
the MySQL client library. Currently, you can choose error messages in
several different languages.

* Return Values *

A character string that describes the error. An empty string if no
error occurred.

* Errors *

None.


File: manual.info,  Node: mysql-stmt-execute,  Next: mysql-stmt-fetch,  Prev: mysql-stmt-error,  Up: c-api-prepared-statement-functions

22.8.11.10 `mysql_stmt_execute()'
.................................

`int mysql_stmt_execute(MYSQL_STMT *stmt)'

* Description *

*Note `mysql_stmt_execute()': mysql-stmt-execute. executes the prepared
query associated with the statement handle. The currently bound
parameter marker values are sent to server during this call, and the
server replaces the markers with this newly supplied data.

Statement processing following *Note `mysql_stmt_execute()':
mysql-stmt-execute. depends on the type of statement:

   * For an *Note `UPDATE': update, *Note `DELETE': delete, or *Note
     `INSERT': insert, the number of changed, deleted, or inserted rows
     can be found by calling *Note `mysql_stmt_affected_rows()':
     mysql-stmt-affected-rows.

   * For a statement such as *Note `SELECT': select. that generates a
     result set, you must call *Note `mysql_stmt_fetch()':
     mysql-stmt-fetch. to fetch the data prior to calling any other
     functions that result in query processing. For more information on
     how to fetch the results, refer to *Note mysql-stmt-fetch::.

     Do not following invocation of *Note `mysql_stmt_execute()':
     mysql-stmt-execute. with a call to *Note `mysql_store_result()':
     mysql-store-result.  or *Note `mysql_use_result()':
     mysql-use-result. Those functions are not intended for processing
     results from prepared statements.

For statements that generate a result set, you can request that *Note
`mysql_stmt_execute()': mysql-stmt-execute. open a cursor for the
statement by calling *Note `mysql_stmt_attr_set()':
mysql-stmt-attr-set. before executing the statement. If you execute a
statement multiple times, *Note `mysql_stmt_execute()':
mysql-stmt-execute.  closes any open cursor before opening a new one.

Metadata changes to tables or views referred to by prepared statements
are detected and cause automatic repreparation of the statement when it
is next executed. For more information, see *Note
statement-repreparation::.

* Return Values *

Zero if execution was successful. Nonzero if an error occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_OUT_OF_MEMORY'

     Out of memory.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.

* Example *

The following example demonstrates how to create and populate a table
using *Note `mysql_stmt_init()': mysql-stmt-init, *Note
`mysql_stmt_prepare()': mysql-stmt-prepare, *Note
`mysql_stmt_param_count()': mysql-stmt-param-count, *Note
`mysql_stmt_bind_param()': mysql-stmt-bind-param, *Note
`mysql_stmt_execute()': mysql-stmt-execute, and *Note
`mysql_stmt_affected_rows()': mysql-stmt-affected-rows. The `mysql'
variable is assumed to be a valid connection handle. For an example
that shows how to retrieve data, see *Note mysql-stmt-fetch::.

     #define STRING_SIZE 50

     #define DROP_SAMPLE_TABLE "DROP TABLE IF EXISTS test_table"
     #define CREATE_SAMPLE_TABLE "CREATE TABLE test_table(col1 INT,\
                                                      col2 VARCHAR(40),\
                                                      col3 SMALLINT,\
                                                      col4 TIMESTAMP)"
     #define INSERT_SAMPLE "INSERT INTO \
                            test_table(col1,col2,col3) \
                            VALUES(?,?,?)"

     MYSQL_STMT    *stmt;
     MYSQL_BIND    bind[3];
     my_ulonglong  affected_rows;
     int           param_count;
     short         small_data;
     int           int_data;
     char          str_data[STRING_SIZE];
     unsigned long str_length;
     my_bool       is_null;

     if (mysql_query(mysql, DROP_SAMPLE_TABLE))
     {
       fprintf(stderr, " DROP TABLE failed\n");
       fprintf(stderr, " %s\n", mysql_error(mysql));
       exit(0);
     }

     if (mysql_query(mysql, CREATE_SAMPLE_TABLE))
     {
       fprintf(stderr, " CREATE TABLE failed\n");
       fprintf(stderr, " %s\n", mysql_error(mysql));
       exit(0);
     }

     /* Prepare an INSERT query with 3 parameters */
     /* (the TIMESTAMP column is not named; the server */
     /*  sets it to the current date and time) */
     stmt = mysql_stmt_init(mysql);
     if (!stmt)
     {
       fprintf(stderr, " mysql_stmt_init(), out of memory\n");
       exit(0);
     }
     if (mysql_stmt_prepare(stmt, INSERT_SAMPLE, strlen(INSERT_SAMPLE)))
     {
       fprintf(stderr, " mysql_stmt_prepare(), INSERT failed\n");
       fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
       exit(0);
     }
     fprintf(stdout, " prepare, INSERT successful\n");

     /* Get the parameter count from the statement */
     param_count= mysql_stmt_param_count(stmt);
     fprintf(stdout, " total parameters in INSERT: %d\n", param_count);

     if (param_count != 3) /* validate parameter count */
     {
       fprintf(stderr, " invalid parameter count returned by MySQL\n");
       exit(0);
     }

     /* Bind the data for all 3 parameters */

     memset(bind, 0, sizeof(bind));

     /* INTEGER PARAM */
     /* This is a number type, so there is no need
        to specify buffer_length */
     bind[0].buffer_type= MYSQL_TYPE_LONG;
     bind[0].buffer= (char *)&int_data;
     bind[0].is_null= 0;
     bind[0].length= 0;

     /* STRING PARAM */
     bind[1].buffer_type= MYSQL_TYPE_STRING;
     bind[1].buffer= (char *)str_data;
     bind[1].buffer_length= STRING_SIZE;
     bind[1].is_null= 0;
     bind[1].length= &str_length;

     /* SMALLINT PARAM */
     bind[2].buffer_type= MYSQL_TYPE_SHORT;
     bind[2].buffer= (char *)&small_data;
     bind[2].is_null= &is_null;
     bind[2].length= 0;

     /* Bind the buffers */
     if (mysql_stmt_bind_param(stmt, bind))
     {
       fprintf(stderr, " mysql_stmt_bind_param() failed\n");
       fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
       exit(0);
     }

     /* Specify the data values for the first row */
     int_data= 10;             /* integer */
     strncpy(str_data, "MySQL", STRING_SIZE); /* string  */
     str_length= strlen(str_data);

     /* INSERT SMALLINT data as NULL */
     is_null= 1;

     /* Execute the INSERT statement - 1*/
     if (mysql_stmt_execute(stmt))
     {
       fprintf(stderr, " mysql_stmt_execute(), 1 failed\n");
       fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
       exit(0);
     }

     /* Get the number of affected rows */
     affected_rows= mysql_stmt_affected_rows(stmt);
     fprintf(stdout, " total affected rows(insert 1): %lu\n",
                     (unsigned long) affected_rows);

     if (affected_rows != 1) /* validate affected rows */
     {
       fprintf(stderr, " invalid affected rows by MySQL\n");
       exit(0);
     }

     /* Specify data values for second row,
        then re-execute the statement */
     int_data= 1000;
     strncpy(str_data, "
             The most popular Open Source database",
             STRING_SIZE);
     str_length= strlen(str_data);
     small_data= 1000;         /* smallint */
     is_null= 0;               /* reset */

     /* Execute the INSERT statement - 2*/
     if (mysql_stmt_execute(stmt))
     {
       fprintf(stderr, " mysql_stmt_execute, 2 failed\n");
       fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
       exit(0);
     }

     /* Get the total rows affected */
     affected_rows= mysql_stmt_affected_rows(stmt);
     fprintf(stdout, " total affected rows(insert 2): %lu\n",
                     (unsigned long) affected_rows);

     if (affected_rows != 1) /* validate affected rows */
     {
       fprintf(stderr, " invalid affected rows by MySQL\n");
       exit(0);
     }

     /* Close the statement */
     if (mysql_stmt_close(stmt))
     {
       fprintf(stderr, " failed while closing the statement\n");
       fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
       exit(0);
     }

*Note*:

For complete examples on the use of prepared statement functions, refer
to the file `tests/mysql_client_test.c'. This file can be obtained from
a MySQL source distribution or from the Bazaar source repository.


File: manual.info,  Node: mysql-stmt-fetch,  Next: mysql-stmt-fetch-column,  Prev: mysql-stmt-execute,  Up: c-api-prepared-statement-functions

22.8.11.11 `mysql_stmt_fetch()'
...............................

`int mysql_stmt_fetch(MYSQL_STMT *stmt)'

* Description *

*Note `mysql_stmt_fetch()': mysql-stmt-fetch. returns the next row in
the result set. It can be called only while the result set exists; that
is, after a call to *Note `mysql_stmt_execute()': mysql-stmt-execute.
for a statement such as *Note `SELECT': select. that produces a result
set.

*Note `mysql_stmt_fetch()': mysql-stmt-fetch. returns row data using
the buffers bound by *Note `mysql_stmt_bind_result()':
mysql-stmt-bind-result. It returns the data in those buffers for all
the columns in the current row set and the lengths are returned to the
`length' pointer. All columns must be bound by the application before
it calls *Note `mysql_stmt_fetch()': mysql-stmt-fetch.

By default, result sets are fetched unbuffered a row at a time from the
server. To buffer the entire result set on the client, call *Note
`mysql_stmt_store_result()': mysql-stmt-store-result.  after binding
the data buffers and before calling *Note `mysql_stmt_fetch()':
mysql-stmt-fetch.

If a fetched data value is a `NULL' value, the `*is_null' value of the
corresponding `MYSQL_BIND' structure contains TRUE (1).  Otherwise, the
data and its length are returned in the `*buffer' and `*length'
elements based on the buffer type specified by the application.  Each
numeric and temporal type has a fixed length, as listed in the
following table. The length of the string types depends on the length
of the actual data value, as indicated by `data_length'.

This table lists numeric and temporal MySQL types and provides the
fixed length of each type.

Type                                 Length
`MYSQL_TYPE_TINY'                    1
`MYSQL_TYPE_SHORT'                   2
`MYSQL_TYPE_LONG'                    4
`MYSQL_TYPE_LONGLONG'                8
`MYSQL_TYPE_FLOAT'                   4
`MYSQL_TYPE_DOUBLE'                  8
`MYSQL_TYPE_TIME'                    `sizeof(MYSQL_TIME)'
`MYSQL_TYPE_DATE'                    `sizeof(MYSQL_TIME)'
`MYSQL_TYPE_DATETIME'                `sizeof(MYSQL_TIME)'
`MYSQL_TYPE_STRING'                  `data length'
`MYSQL_TYPE_BLOB'                    `data_length'

In some cases you might want to determine the length of a column value
before fetching it with *Note `mysql_stmt_fetch()': mysql-stmt-fetch.
For example, the value might be a long string or *Note `BLOB': blob.
value for which you want to know how much space must be allocated. To
accomplish this, you can use these strategies:

   * Before invoking *Note `mysql_stmt_fetch()': mysql-stmt-fetch. to
     retrieve individual rows, pass `STMT_ATTR_UPDATE_MAX_LENGTH' to
     *Note `mysql_stmt_attr_set()': mysql-stmt-attr-set, then invoke
     *Note `mysql_stmt_store_result()': mysql-stmt-store-result. to
     buffer the entire result on the client side. Setting the
     `STMT_ATTR_UPDATE_MAX_LENGTH' attribute causes the maximal length
     of column values to be indicated by the `max_length' member of the
     result set metadata returned by *Note
     `mysql_stmt_result_metadata()': mysql-stmt-result-metadata.

   * Invoke *Note `mysql_stmt_fetch()': mysql-stmt-fetch.  with a
     zero-length buffer for the column in question and a pointer in
     which the real length can be stored. Then use the real length with
     *Note `mysql_stmt_fetch_column()': mysql-stmt-fetch-column.

          real_length= 0;

          bind[0].buffer= 0;
          bind[0].buffer_length= 0;
          bind[0].length= &real_length
          mysql_stmt_bind_result(stmt, bind);

          mysql_stmt_fetch(stmt);
          if (real_length > 0)
          {
            data= malloc(real_length);
            bind[0].buffer= data;
            bind[0].buffer_length= real_length;
            mysql_stmt_fetch_column(stmt, bind, 0, 0);
          }

* Return Values *

This table lists return values for *Note `mysql_stmt_fetch()':
mysql-stmt-fetch.  and provides a description of each value.

Return Value              Description
0                         Successful, the data has been fetched to
                          application data buffers.
1                         Error occurred. Error code and message can be
                          obtained by calling *Note
                          `mysql_stmt_errno()': mysql-stmt-errno. and
                          *Note `mysql_stmt_error()': mysql-stmt-error.
`MYSQL_NO_DATA'           No more rows/data exists
`MYSQL_DATA_TRUNCATED'    Data truncation occurred

`MYSQL_DATA_TRUNCATED' is returned when truncation reporting is
enabled. To determine which column values were truncated when this
value is returned, check the `error' members of the `MYSQL_BIND'
structures used for fetching values. Truncation reporting is enabled by
default, but can be controlled by calling *Note `mysql_options()':
mysql-options. with the `MYSQL_REPORT_DATA_TRUNCATION' option.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_OUT_OF_MEMORY'

     Out of memory.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.

   * `CR_UNSUPPORTED_PARAM_TYPE'

     The buffer type is `MYSQL_TYPE_DATE', `MYSQL_TYPE_TIME',
     `MYSQL_TYPE_DATETIME', or `MYSQL_TYPE_TIMESTAMP', but the data type
     is not *Note `DATE': datetime, *Note `TIME': time, *Note
     `DATETIME': datetime, or *Note `TIMESTAMP': datetime.

   * All other unsupported conversion errors are returned from *Note
     `mysql_stmt_bind_result()': mysql-stmt-bind-result.

* Example *

The following example demonstrates how to fetch data from a table using
*Note `mysql_stmt_result_metadata()': mysql-stmt-result-metadata, *Note
`mysql_stmt_bind_result()': mysql-stmt-bind-result, and *Note
`mysql_stmt_fetch()': mysql-stmt-fetch. (This example expects to
retrieve the two rows inserted by the example shown in *Note
mysql-stmt-execute::.) The `mysql' variable is assumed to be a valid
connection handle.

     #define STRING_SIZE 50

     #define SELECT_SAMPLE "SELECT col1, col2, col3, col4 \
                            FROM test_table"

     MYSQL_STMT    *stmt;
     MYSQL_BIND    bind[4];
     MYSQL_RES     *prepare_meta_result;
     MYSQL_TIME    ts;
     unsigned long length[4];
     int           param_count, column_count, row_count;
     short         small_data;
     int           int_data;
     char          str_data[STRING_SIZE];
     my_bool       is_null[4];
     my_bool       error[4];

     /* Prepare a SELECT query to fetch data from test_table */
     stmt = mysql_stmt_init(mysql);
     if (!stmt)
     {
       fprintf(stderr, " mysql_stmt_init(), out of memory\n");
       exit(0);
     }
     if (mysql_stmt_prepare(stmt, SELECT_SAMPLE, strlen(SELECT_SAMPLE)))
     {
       fprintf(stderr, " mysql_stmt_prepare(), SELECT failed\n");
       fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
       exit(0);
     }
     fprintf(stdout, " prepare, SELECT successful\n");

     /* Get the parameter count from the statement */
     param_count= mysql_stmt_param_count(stmt);
     fprintf(stdout, " total parameters in SELECT: %d\n", param_count);

     if (param_count != 0) /* validate parameter count */
     {
       fprintf(stderr, " invalid parameter count returned by MySQL\n");
       exit(0);
     }

     /* Fetch result set meta information */
     prepare_meta_result = mysql_stmt_result_metadata(stmt);
     if (!prepare_meta_result)
     {
       fprintf(stderr,
              " mysql_stmt_result_metadata(), \
                returned no meta information\n");
       fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
       exit(0);
     }

     /* Get total columns in the query */
     column_count= mysql_num_fields(prepare_meta_result);
     fprintf(stdout,
             " total columns in SELECT statement: %d\n",
             column_count);

     if (column_count != 4) /* validate column count */
     {
       fprintf(stderr, " invalid column count returned by MySQL\n");
       exit(0);
     }

     /* Execute the SELECT query */
     if (mysql_stmt_execute(stmt))
     {
       fprintf(stderr, " mysql_stmt_execute(), failed\n");
       fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
       exit(0);
     }

     /* Bind the result buffers for all 4 columns before fetching them */

     memset(bind, 0, sizeof(bind));

     /* INTEGER COLUMN */
     bind[0].buffer_type= MYSQL_TYPE_LONG;
     bind[0].buffer= (char *)&int_data;
     bind[0].is_null= &is_null[0];
     bind[0].length= &length[0];
     bind[0].error= &error[0];

     /* STRING COLUMN */
     bind[1].buffer_type= MYSQL_TYPE_STRING;
     bind[1].buffer= (char *)str_data;
     bind[1].buffer_length= STRING_SIZE;
     bind[1].is_null= &is_null[1];
     bind[1].length= &length[1];
     bind[1].error= &error[1];

     /* SMALLINT COLUMN */
     bind[2].buffer_type= MYSQL_TYPE_SHORT;
     bind[2].buffer= (char *)&small_data;
     bind[2].is_null= &is_null[2];
     bind[2].length= &length[2];
     bind[2].error= &error[2];

     /* TIMESTAMP COLUMN */
     bind[3].buffer_type= MYSQL_TYPE_TIMESTAMP;
     bind[3].buffer= (char *)&ts;
     bind[3].is_null= &is_null[3];
     bind[3].length= &length[3];
     bind[3].error= &error[3];

     /* Bind the result buffers */
     if (mysql_stmt_bind_result(stmt, bind))
     {
       fprintf(stderr, " mysql_stmt_bind_result() failed\n");
       fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
       exit(0);
     }

     /* Now buffer all results to client (optional step) */
     if (mysql_stmt_store_result(stmt))
     {
       fprintf(stderr, " mysql_stmt_store_result() failed\n");
       fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
       exit(0);
     }

     /* Fetch all rows */
     row_count= 0;
     fprintf(stdout, "Fetching results ...\n");
     while (!mysql_stmt_fetch(stmt))
     {
       row_count++;
       fprintf(stdout, "  row %d\n", row_count);

       /* column 1 */
       fprintf(stdout, "   column1 (integer)  : ");
       if (is_null[0])
         fprintf(stdout, " NULL\n");
       else
         fprintf(stdout, " %d(%ld)\n", int_data, length[0]);

       /* column 2 */
       fprintf(stdout, "   column2 (string)   : ");
       if (is_null[1])
         fprintf(stdout, " NULL\n");
       else
         fprintf(stdout, " %s(%ld)\n", str_data, length[1]);

       /* column 3 */
       fprintf(stdout, "   column3 (smallint) : ");
       if (is_null[2])
         fprintf(stdout, " NULL\n");
       else
         fprintf(stdout, " %d(%ld)\n", small_data, length[2]);

       /* column 4 */
       fprintf(stdout, "   column4 (timestamp): ");
       if (is_null[3])
         fprintf(stdout, " NULL\n");
       else
         fprintf(stdout, " %04d-%02d-%02d %02d:%02d:%02d (%ld)\n",
                          ts.year, ts.month, ts.day,
                          ts.hour, ts.minute, ts.second,
                          length[3]);
       fprintf(stdout, "\n");
     }

     /* Validate rows fetched */
     fprintf(stdout, " total rows fetched: %d\n", row_count);
     if (row_count != 2)
     {
       fprintf(stderr, " MySQL failed to return all rows\n");
       exit(0);
     }

     /* Free the prepared result metadata */
     mysql_free_result(prepare_meta_result);

     /* Close the statement */
     if (mysql_stmt_close(stmt))
     {
       fprintf(stderr, " failed while closing the statement\n");
       fprintf(stderr, " %s\n", mysql_stmt_error(stmt));
       exit(0);
     }


File: manual.info,  Node: mysql-stmt-fetch-column,  Next: mysql-stmt-field-count,  Prev: mysql-stmt-fetch,  Up: c-api-prepared-statement-functions

22.8.11.12 `mysql_stmt_fetch_column()'
......................................

`int mysql_stmt_fetch_column(MYSQL_STMT *stmt, MYSQL_BIND *bind,
unsigned int column, unsigned long offset)'

* Description *

Fetch one column from the current result set row.  `bind' provides the
buffer where data should be placed. It should be set up the same way as
for *Note `mysql_stmt_bind_result()': mysql-stmt-bind-result.  `column'
indicates which column to fetch. The first column is numbered 0.
`offset' is the offset within the data value at which to begin
retrieving data.  This can be used for fetching the data value in
pieces. The beginning of the value is offset 0.

* Return Values *

Zero if the value was fetched successfully. Nonzero if an error
occurred.

* Errors *

   * `CR_INVALID_PARAMETER_NO'

     Invalid column number.

   * `CR_NO_DATA'

     The end of the result set has already been reached.


File: manual.info,  Node: mysql-stmt-field-count,  Next: mysql-stmt-free-result,  Prev: mysql-stmt-fetch-column,  Up: c-api-prepared-statement-functions

22.8.11.13 `mysql_stmt_field_count()'
.....................................

`unsigned int mysql_stmt_field_count(MYSQL_STMT *stmt)'

* Description *

Returns the number of columns for the most recent statement for the
statement handler. This value is zero for statements such as *Note
`INSERT': insert. or *Note `DELETE': delete. that do not produce result
sets.

*Note `mysql_stmt_field_count()': mysql-stmt-field-count. can be called
after you have prepared a statement by invoking *Note
`mysql_stmt_prepare()': mysql-stmt-prepare.

* Return Values *

An unsigned integer representing the number of columns in a result set.

* Errors *

None.


File: manual.info,  Node: mysql-stmt-free-result,  Next: mysql-stmt-init,  Prev: mysql-stmt-field-count,  Up: c-api-prepared-statement-functions

22.8.11.14 `mysql_stmt_free_result()'
.....................................

`my_bool mysql_stmt_free_result(MYSQL_STMT *stmt)'

* Description *

Releases memory associated with the result set produced by execution of
the prepared statement. If there is a cursor open for the statement,
*Note `mysql_stmt_free_result()': mysql-stmt-free-result. closes it.

* Return Values *

Zero if the result set was freed successfully. Nonzero if an error
occurred.

* Errors *


File: manual.info,  Node: mysql-stmt-init,  Next: mysql-stmt-insert-id,  Prev: mysql-stmt-free-result,  Up: c-api-prepared-statement-functions

22.8.11.15 `mysql_stmt_init()'
..............................

`MYSQL_STMT *mysql_stmt_init(MYSQL *mysql)'

* Description *

Create a `MYSQL_STMT' handle. The handle should be freed with *Note
`mysql_stmt_close(MYSQL_STMT *)': mysql-stmt-close.

See also *Note c-api-prepared-statement-data-structures::, for more
information.

* Return Values *

A pointer to a `MYSQL_STMT' structure in case of success. `NULL' if out
of memory.

* Errors *

   * `CR_OUT_OF_MEMORY'

     Out of memory.


File: manual.info,  Node: mysql-stmt-insert-id,  Next: mysql-stmt-next-result,  Prev: mysql-stmt-init,  Up: c-api-prepared-statement-functions

22.8.11.16 `mysql_stmt_insert_id()'
...................................

`my_ulonglong mysql_stmt_insert_id(MYSQL_STMT *stmt)'

* Description *

Returns the value generated for an `AUTO_INCREMENT' column by the
prepared *Note `INSERT': insert. or *Note `UPDATE': update. statement.
Use this function after you have executed a prepared *Note `INSERT':
insert. statement on a table which contains an `AUTO_INCREMENT' field.

See *Note mysql-insert-id::, for more information.

* Return Values *

Value for `AUTO_INCREMENT' column which was automatically generated or
explicitly set during execution of prepared statement, or value
generated by `LAST_INSERT_ID(EXPR)' function. Return value is undefined
if statement does not set `AUTO_INCREMENT' value.

* Errors *

None.


File: manual.info,  Node: mysql-stmt-next-result,  Next: mysql-stmt-num-rows,  Prev: mysql-stmt-insert-id,  Up: c-api-prepared-statement-functions

22.8.11.17 `mysql_stmt_next_result()'
.....................................

`int mysql_stmt_next_result(MYSQL_STMT *mysql)'

* Description *

This function is used when you use prepared *Note `CALL': call.
statements to execute stored procedures, which can return multiple
result sets. Use a loop that calls *Note `mysql_stmt_next_result()':
mysql-stmt-next-result. to determine whether there are more results. If
a procedure has `OUT' or `INOUT' parameters, their values will be
returned as a single-row result set following any other result sets.
The values will appear in the order in which they are declared in the
procedure parameter list.

*Note `mysql_stmt_next_result()': mysql-stmt-next-result. returns a
status to indicate whether more results exist. If *Note
`mysql_stmt_next_result()': mysql-stmt-next-result. returns an error,
there are no more results.

Before each call to *Note `mysql_stmt_next_result()':
mysql-stmt-next-result, you must call *Note `mysql_stmt_free_result()':
mysql-stmt-free-result. for the current result if it produced a result
set (rather than just a result status).

After calling *Note `mysql_stmt_next_result()': mysql-stmt-next-result.
the state of the connection is as if you had called *Note
`mysql_stmt_execute()': mysql-stmt-execute. This means that you can call
*Note `mysql_stmt_bind_result()': mysql-stmt-bind-result, *Note
`mysql_stmt_affected_rows()': mysql-stmt-affected-rows, and so forth.

It is also possible to test whether there are more results by calling
*Note `mysql_more_results()': mysql-more-results.  However, this
function does not change the connection state, so if it returns true,
you must still call *Note `mysql_stmt_next_result()':
mysql-stmt-next-result. to advance to the next result.

For an example that shows how to use *Note `mysql_stmt_next_result()':
mysql-stmt-next-result, see *Note c-api-prepared-call-statements::.

*Note `mysql_stmt_next_result()': mysql-stmt-next-result. was added in
MySQL 5.5.3.

* Return Values *

This table lists return values for *Note `mysql_stmt_next_result()':
mysql-stmt-next-result.  and provides a description of each value.

Return Value              Description
0                         Successful and there are more results
-1                        Successful and there are no more results
>0                        An error occurred

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: mysql-stmt-num-rows,  Next: mysql-stmt-param-count,  Prev: mysql-stmt-next-result,  Up: c-api-prepared-statement-functions

22.8.11.18 `mysql_stmt_num_rows()'
..................................

`my_ulonglong mysql_stmt_num_rows(MYSQL_STMT *stmt)'

* Description *

Returns the number of rows in the result set.

The use of *Note `mysql_stmt_num_rows()': mysql-stmt-num-rows.  depends
on whether you used *Note `mysql_stmt_store_result()':
mysql-stmt-store-result. to buffer the entire result set in the
statement handle. If you use *Note `mysql_stmt_store_result()':
mysql-stmt-store-result, *Note `mysql_stmt_num_rows()':
mysql-stmt-num-rows. may be called immediately. Otherwise, the row
count is unavailable unless you count the rows as you fetch them.

*Note `mysql_stmt_num_rows()': mysql-stmt-num-rows. is intended for use
with statements that return a result set, such as *Note `SELECT':
select. For statements such as *Note `INSERT': insert, *Note `UPDATE':
update, or *Note `DELETE': delete, the number of affected rows can be
obtained with *Note `mysql_stmt_affected_rows()':
mysql-stmt-affected-rows.

* Return Values *

The number of rows in the result set.

* Errors *

None.


File: manual.info,  Node: mysql-stmt-param-count,  Next: mysql-stmt-param-metadata,  Prev: mysql-stmt-num-rows,  Up: c-api-prepared-statement-functions

22.8.11.19 `mysql_stmt_param_count()'
.....................................

`unsigned long mysql_stmt_param_count(MYSQL_STMT *stmt)'

* Description *

Returns the number of parameter markers present in the prepared
statement.

* Return Values *

An unsigned long integer representing the number of parameters in a
statement.

* Errors *

None.

* Example *

See the Example in *Note mysql-stmt-execute::.


File: manual.info,  Node: mysql-stmt-param-metadata,  Next: mysql-stmt-prepare,  Prev: mysql-stmt-param-count,  Up: c-api-prepared-statement-functions

22.8.11.20 `mysql_stmt_param_metadata()'
........................................

`MYSQL_RES *mysql_stmt_param_metadata(MYSQL_STMT *stmt)'

This function currently does nothing.

* Description *

* Return Values *

* Errors *


File: manual.info,  Node: mysql-stmt-prepare,  Next: mysql-stmt-reset,  Prev: mysql-stmt-param-metadata,  Up: c-api-prepared-statement-functions

22.8.11.21 `mysql_stmt_prepare()'
.................................

`int mysql_stmt_prepare(MYSQL_STMT *stmt, const char *stmt_str,
unsigned long length)'

* Description *

Given the statement handle returned by *Note `mysql_stmt_init()':
mysql-stmt-init, prepares the SQL statement pointed to by the string
`stmt_str' and returns a status value. The string length should be
given by the `length' argument. The string must consist of a single SQL
statement. You should not add a terminating semicolon (``;'') or `\g'
to the statement.

The application can include one or more parameter markers in the SQL
statement by embedding question mark (`?') characters into the SQL
string at the appropriate positions.

The markers are legal only in certain places in SQL statements.  For
example, they are permitted in the `VALUES()' list of an *Note
`INSERT': insert. statement (to specify column values for a row), or in
a comparison with a column in a `WHERE' clause to specify a comparison
value.  However, they are not permitted for identifiers (such as table
or column names), or to specify both operands of a binary operator such
as the `=' equal sign. The latter restriction is necessary because it
would be impossible to determine the parameter type. In general,
parameters are legal only in Data Manipulation Language (DML)
statements, and not in Data Definition Language (DDL) statements.

The parameter markers must be bound to application variables using
*Note `mysql_stmt_bind_param()': mysql-stmt-bind-param.  before
executing the statement.

Metadata changes to tables or views referred to by prepared statements
are detected and cause automatic repreparation of the statement when it
is next executed. For more information, see *Note
statement-repreparation::.

* Return Values *

Zero if the statement was prepared successfully. Nonzero if an error
occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_OUT_OF_MEMORY'

     Out of memory.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.

If the prepare operation was unsuccessful (that is, *Note
`mysql_stmt_prepare()': mysql-stmt-prepare. returns nonzero), the error
message can be obtained by calling *Note `mysql_stmt_error()':
mysql-stmt-error.

* Example *

See the Example in *Note mysql-stmt-execute::.


File: manual.info,  Node: mysql-stmt-reset,  Next: mysql-stmt-result-metadata,  Prev: mysql-stmt-prepare,  Up: c-api-prepared-statement-functions

22.8.11.22 `mysql_stmt_reset()'
...............................

`my_bool mysql_stmt_reset(MYSQL_STMT *stmt)'

* Description *

Resets a prepared statement on client and server to state after
prepare. It resets the statement on the server, data sent using *Note
`mysql_stmt_send_long_data()': mysql-stmt-send-long-data, unbuffered
result sets and current errors. It does not clear bindings or stored
result sets. Stored result sets will be cleared when executing the
prepared statement (or closing it).

To re-prepare the statement with another query, use *Note
`mysql_stmt_prepare()': mysql-stmt-prepare.

* Return Values *

Zero if the statement was reset successfully. Nonzero if an error
occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: mysql-stmt-result-metadata,  Next: mysql-stmt-row-seek,  Prev: mysql-stmt-reset,  Up: c-api-prepared-statement-functions

22.8.11.23 `mysql_stmt_result_metadata()'
.........................................

`MYSQL_RES *mysql_stmt_result_metadata(MYSQL_STMT *stmt)'

* Description *

If a statement passed to *Note `mysql_stmt_prepare()':
mysql-stmt-prepare. is one that produces a result set, *Note
`mysql_stmt_result_metadata()': mysql-stmt-result-metadata.  returns
the result set metadata in the form of a pointer to a `MYSQL_RES'
structure that can be used to process the meta information such as
number of fields and individual field information. This result set
pointer can be passed as an argument to any of the field-based API
functions that process result set metadata, such as:

   * *Note `mysql_num_fields()': mysql-num-fields.

   * *Note `mysql_fetch_field()': mysql-fetch-field.

   * *Note `mysql_fetch_field_direct()': mysql-fetch-field-direct.

   * *Note `mysql_fetch_fields()': mysql-fetch-fields.

   * *Note `mysql_field_count()': mysql-field-count.

   * *Note `mysql_field_seek()': mysql-field-seek.

   * *Note `mysql_field_tell()': mysql-field-tell.

   * *Note `mysql_free_result()': mysql-free-result.

The result set structure should be freed when you are done with it,
which you can do by passing it to *Note `mysql_free_result()':
mysql-free-result. This is similar to the way you free a result set
obtained from a call to *Note `mysql_store_result()':
mysql-store-result.

The result set returned by *Note `mysql_stmt_result_metadata()':
mysql-stmt-result-metadata.  contains only metadata. It does not
contain any row results. The rows are obtained by using the statement
handle with *Note `mysql_stmt_fetch()': mysql-stmt-fetch.

* Return Values *

A `MYSQL_RES' result structure.  `NULL' if no meta information exists
for the prepared query.

* Errors *

   * `CR_OUT_OF_MEMORY'

     Out of memory.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.

* Example *

See the Example in *Note mysql-stmt-fetch::.


File: manual.info,  Node: mysql-stmt-row-seek,  Next: mysql-stmt-row-tell,  Prev: mysql-stmt-result-metadata,  Up: c-api-prepared-statement-functions

22.8.11.24 `mysql_stmt_row_seek()'
..................................

`MYSQL_ROW_OFFSET mysql_stmt_row_seek(MYSQL_STMT *stmt,
MYSQL_ROW_OFFSET offset)'

* Description *

Sets the row cursor to an arbitrary row in a statement result set. The
`offset' value is a row offset that should be a value returned from
*Note `mysql_stmt_row_tell()': mysql-stmt-row-tell. or from *Note
`mysql_stmt_row_seek()': mysql-stmt-row-seek. This value is not a row
number; if you want to seek to a row within a result set by number, use
*Note `mysql_stmt_data_seek()': mysql-stmt-data-seek. instead.

This function requires that the result set structure contains the
entire result of the query, so *Note `mysql_stmt_row_seek()':
mysql-stmt-row-seek. may be used only in conjunction with *Note
`mysql_stmt_store_result()': mysql-stmt-store-result.

* Return Values *

The previous value of the row cursor. This value may be passed to a
subsequent call to *Note `mysql_stmt_row_seek()': mysql-stmt-row-seek.

* Errors *

None.


File: manual.info,  Node: mysql-stmt-row-tell,  Next: mysql-stmt-send-long-data,  Prev: mysql-stmt-row-seek,  Up: c-api-prepared-statement-functions

22.8.11.25 `mysql_stmt_row_tell()'
..................................

`MYSQL_ROW_OFFSET mysql_stmt_row_tell(MYSQL_STMT *stmt)'

* Description *

Returns the current position of the row cursor for the last *Note
`mysql_stmt_fetch()': mysql-stmt-fetch. This value can be used as an
argument to *Note `mysql_stmt_row_seek()': mysql-stmt-row-seek.

You should use *Note `mysql_stmt_row_tell()': mysql-stmt-row-tell. only
after *Note `mysql_stmt_store_result()': mysql-stmt-store-result.

* Return Values *

The current offset of the row cursor.

* Errors *

None.


File: manual.info,  Node: mysql-stmt-send-long-data,  Next: mysql-stmt-sqlstate,  Prev: mysql-stmt-row-tell,  Up: c-api-prepared-statement-functions

22.8.11.26 `mysql_stmt_send_long_data()'
........................................

`my_bool mysql_stmt_send_long_data(MYSQL_STMT *stmt, unsigned int
parameter_number, const char *data, unsigned long length)'

* Description *

Enables an application to send parameter data to the server in pieces
(or `chunks'). Call this function after *Note
`mysql_stmt_bind_param()': mysql-stmt-bind-param. and before *Note
`mysql_stmt_execute()': mysql-stmt-execute. It can be called multiple
times to send the parts of a character or binary data value for a
column, which must be one of the *Note `TEXT': blob. or *Note `BLOB':
blob. data types.

`parameter_number' indicates which parameter to associate the data
with. Parameters are numbered beginning with 0. `data' is a pointer to
a buffer containing data to be sent, and `length' indicates the number
of bytes in the buffer.

*Note*:

The next *Note `mysql_stmt_execute()': mysql-stmt-execute.  call
ignores the bind buffer for all parameters that have been used with
*Note `mysql_stmt_send_long_data()': mysql-stmt-send-long-data.  since
last *Note `mysql_stmt_execute()': mysql-stmt-execute. or *Note
`mysql_stmt_reset()': mysql-stmt-reset.

If you want to reset/forget the sent data, you can do it with *Note
`mysql_stmt_reset()': mysql-stmt-reset. See *Note mysql-stmt-reset::.

As of MySQL 5.5.11, the `max_long_data_size' system variable controls
the maximum size of parameter values that can be sent with *Note
`mysql_stmt_send_long_data()': mysql-stmt-send-long-data. If this
variable not set at server startup, the default is the value of the
`max_allowed_packet' system variable.  `max_long_data_size' is
deprecated. In MySQL 5.6, it is removed and the maximum parameter size
is controlled by `max_allowed_packet'.

* Return Values *

Zero if the data is sent successfully to server. Nonzero if an error
occurred.

* Errors *

   * `CR_INVALID_BUFFER_USE'

     The parameter does not have a string or binary type.

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_OUT_OF_MEMORY'

     Out of memory.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.

* Example *

The following example demonstrates how to send the data for a *Note
`TEXT': blob. column in chunks. It inserts the data value `'MySQL - The
most popular Open Source database'' into the `text_column' column. The
`mysql' variable is assumed to be a valid connection handle.

     #define INSERT_QUERY "INSERT INTO \
                           test_long_data(text_column) VALUES(?)"

     MYSQL_BIND bind[1];
     long       length;

     stmt = mysql_stmt_init(mysql);
     if (!stmt)
     {
       fprintf(stderr, " mysql_stmt_init(), out of memory\n");
       exit(0);
     }
     if (mysql_stmt_prepare(stmt, INSERT_QUERY, strlen(INSERT_QUERY)))
     {
       fprintf(stderr, "\n mysql_stmt_prepare(), INSERT failed");
       fprintf(stderr, "\n %s", mysql_stmt_error(stmt));
       exit(0);
     }
      memset(bind, 0, sizeof(bind));
      bind[0].buffer_type= MYSQL_TYPE_STRING;
      bind[0].length= &length;
      bind[0].is_null= 0;

     /* Bind the buffers */
     if (mysql_stmt_bind_param(stmt, bind))
     {
       fprintf(stderr, "\n param bind failed");
       fprintf(stderr, "\n %s", mysql_stmt_error(stmt));
       exit(0);
     }

      /* Supply data in chunks to server */
      if (mysql_stmt_send_long_data(stmt,0,"MySQL",5))
     {
       fprintf(stderr, "\n send_long_data failed");
       fprintf(stderr, "\n %s", mysql_stmt_error(stmt));
       exit(0);
     }

      /* Supply the next piece of data */
      if (mysql_stmt_send_long_data(stmt,0,
                " - The most popular Open Source database",40))
     {
       fprintf(stderr, "\n send_long_data failed");
       fprintf(stderr, "\n %s", mysql_stmt_error(stmt));
       exit(0);
     }

      /* Now, execute the query */
      if (mysql_stmt_execute(stmt))
     {
       fprintf(stderr, "\n mysql_stmt_execute failed");
       fprintf(stderr, "\n %s", mysql_stmt_error(stmt));
       exit(0);
     }


File: manual.info,  Node: mysql-stmt-sqlstate,  Next: mysql-stmt-store-result,  Prev: mysql-stmt-send-long-data,  Up: c-api-prepared-statement-functions

22.8.11.27 `mysql_stmt_sqlstate()'
..................................

`const char *mysql_stmt_sqlstate(MYSQL_STMT *stmt)'

* Description *

For the statement specified by `stmt', *Note `mysql_stmt_sqlstate()':
mysql-stmt-sqlstate. returns a null-terminated string containing the
SQLSTATE error code for the most recently invoked prepared statement
API function that can succeed or fail. The error code consists of five
characters.  `"00000"' means `no error.' The values are specified by
ANSI SQL and ODBC. For a list of possible values, see *Note
error-handling::.

Note that not all MySQL errors are yet mapped to SQLSTATE codes.  The
value `"HY000"' (general error) is used for unmapped errors.

* Return Values *

A null-terminated character string containing the SQLSTATE error code.


File: manual.info,  Node: mysql-stmt-store-result,  Prev: mysql-stmt-sqlstate,  Up: c-api-prepared-statement-functions

22.8.11.28 `mysql_stmt_store_result()'
......................................

`int mysql_stmt_store_result(MYSQL_STMT *stmt)'

* Description *

Result sets are produced by calling *Note `mysql_stmt_execute()':
mysql-stmt-execute. to executed prepared statements for SQL statements
such as *Note `SELECT': select, *Note `SHOW': show, *Note `DESCRIBE':
describe, and *Note `EXPLAIN': explain. By default, result sets for
successfully executed prepared statements are not buffered on the
client and *Note `mysql_stmt_fetch()': mysql-stmt-fetch. fetches them
one at a time from the server. To cause the complete result set to be
buffered on the client, call *Note `mysql_stmt_store_result()':
mysql-stmt-store-result. after binding data buffers with *Note
`mysql_stmt_bind_result()': mysql-stmt-bind-result. and before calling
*Note `mysql_stmt_fetch()': mysql-stmt-fetch. to fetch rows. (For an
example, see *Note mysql-stmt-fetch::.)

*Note `mysql_stmt_store_result()': mysql-stmt-store-result. is optional
for result set processing, unless you will call *Note
`mysql_stmt_data_seek()': mysql-stmt-data-seek, *Note
`mysql_stmt_row_seek()': mysql-stmt-row-seek, or *Note
`mysql_stmt_row_tell()': mysql-stmt-row-tell. Those functions require a
seekable result set.

It is unnecessary to call *Note `mysql_stmt_store_result()':
mysql-stmt-store-result. after executing an SQL statement that does not
produce a result set, but if you do, it does not harm or cause any
notable performance problem. You can detect whether the statement
produced a result set by checking if *Note
`mysql_stmt_result_metadata()': mysql-stmt-result-metadata.  returns
`NULL'. For more information, refer to *Note
mysql-stmt-result-metadata::.

*Note*:

MySQL doesn't by default calculate `MYSQL_FIELD->max_length' for all
columns in *Note `mysql_stmt_store_result()': mysql-stmt-store-result.
because calculating this would slow down *Note
`mysql_stmt_store_result()': mysql-stmt-store-result.  considerably and
most applications don't need `max_length'. If you want `max_length' to
be updated, you can call *Note `mysql_stmt_attr_set(MYSQL_STMT,
STMT_ATTR_UPDATE_MAX_LENGTH, &flag)': mysql-stmt-attr-set. to enable
this. See *Note mysql-stmt-attr-set::.

* Return Values *

Zero if the results are buffered successfully. Nonzero if an error
occurred.

* Errors *

   * `CR_COMMANDS_OUT_OF_SYNC'

     Commands were executed in an improper order.

   * `CR_OUT_OF_MEMORY'

     Out of memory.

   * `CR_SERVER_GONE_ERROR'

     The MySQL server has gone away.

   * `CR_SERVER_LOST'

     The connection to the server was lost during the query.

   * `CR_UNKNOWN_ERROR'

     An unknown error occurred.


File: manual.info,  Node: c-api-thread-functions,  Next: c-api-embedded-server-functions,  Prev: c-api-prepared-statement-functions,  Up: c-api

22.8.12 C API Threaded Function Descriptions
--------------------------------------------

* Menu:

* my-init::                      `my_init()'
* mysql-thread-end::             `mysql_thread_end()'
* mysql-thread-init::            `mysql_thread_init()'
* mysql-thread-safe::            `mysql_thread_safe()'

To create a threaded client, use the functions described in the
following sections. See also *Note c-api-threaded-clients::.


File: manual.info,  Node: my-init,  Next: mysql-thread-end,  Prev: c-api-thread-functions,  Up: c-api-thread-functions

22.8.12.1 `my_init()'
.....................

`void my_init(void)'

* Description *

*Note `my_init()': my-init. initializes some global variables that
MySQL needs. It also calls *Note `mysql_thread_init()':
mysql-thread-init. for this thread.

It is necessary for *Note `my_init()': my-init. to be called early in
the initialization phase of a program's use of the MySQL library.
However, *Note `my_init()': my-init. is automatically called by *Note
`mysql_init()': mysql-init, *Note `mysql_library_init()':
mysql-library-init, *Note `mysql_server_init()': mysql-server-init, and
*Note `mysql_connect()': mysql-connect. If you ensure that your program
invokes one of those functions before any other MySQL calls, there is
no need to invoke *Note `my_init()': my-init. explicitly.

To access the prototype for *Note `my_init()': my-init, your program
should include these header files:

     #include <my_global.h>
     #include <my_sys.h>

* Return Values *

None.


File: manual.info,  Node: mysql-thread-end,  Next: mysql-thread-init,  Prev: my-init,  Up: c-api-thread-functions

22.8.12.2 `mysql_thread_end()'
..............................

`void mysql_thread_end(void)'

* Description *

This function needs to be called before calling `pthread_exit()' to
free memory allocated by *Note `mysql_thread_init()': mysql-thread-init.

*Note `mysql_thread_end()': mysql-thread-end. _is not invoked
automatically by the client library_. It must be called explicitly to
avoid a memory leak.

* Return Values *

None.


File: manual.info,  Node: mysql-thread-init,  Next: mysql-thread-safe,  Prev: mysql-thread-end,  Up: c-api-thread-functions

22.8.12.3 `mysql_thread_init()'
...............................

`my_bool mysql_thread_init(void)'

* Description *

This function must be called early within each created thread to
initialize thread-specific variables. However, you may not necessarily
need to invoke it explicitly: *Note `mysql_thread_init()':
mysql-thread-init. is automatically called by *Note `my_init()':
my-init, which itself is automatically called by *Note `mysql_init()':
mysql-init, *Note `mysql_library_init()': mysql-library-init, *Note
`mysql_server_init()': mysql-server-init, and *Note `mysql_connect()':
mysql-connect. If you invoke any of those functions, *Note
`mysql_thread_init()': mysql-thread-init. will be called for you.

* Return Values *

Zero if successful. Nonzero if an error occurred.


File: manual.info,  Node: mysql-thread-safe,  Prev: mysql-thread-init,  Up: c-api-thread-functions

22.8.12.4 `mysql_thread_safe()'
...............................

`unsigned int mysql_thread_safe(void)'

* Description *

This function indicates whether the client library is compiled as
thread-safe.

* Return Values *

1 if the client library is thread-safe, 0 otherwise.


File: manual.info,  Node: c-api-embedded-server-functions,  Next: c-api-plugin-functions,  Prev: c-api-thread-functions,  Up: c-api

22.8.13 C API Embedded Server Function Descriptions
---------------------------------------------------

* Menu:

* mysql-server-init::            `mysql_server_init()'
* mysql-server-end::             `mysql_server_end()'

MySQL applications can be written to use an embedded server. See *Note
libmysqld::. To write such an application, you must link it against the
`libmysqld' library by using the `-lmysqld' flag rather than linking it
against the `libmysqlclient' client library by using the
`-lmysqlclient' flag. However, the calls to initialize and finalize the
library are the same whether you write a client application or one that
uses the embedded server: Call *Note `mysql_library_init()':
mysql-library-init. to initialize the library and *Note
`mysql_library_end()': mysql-library-end. when you are done with it.
See *Note c-api-function-overview::.


File: manual.info,  Node: mysql-server-init,  Next: mysql-server-end,  Prev: c-api-embedded-server-functions,  Up: c-api-embedded-server-functions

22.8.13.1 `mysql_server_init()'
...............................

`int mysql_server_init(int argc, char **argv, char **groups)'

* Description *

This function initializes the MySQL library, which must be done before
you call any other MySQL function. However, *Note
`mysql_server_init()': mysql-server-init. is deprecated and you should
call *Note `mysql_library_init()': mysql-library-init. instead.  See
*Note mysql-library-init::.

* Return Values *

Zero if successful. Nonzero if an error occurred.


File: manual.info,  Node: mysql-server-end,  Prev: mysql-server-init,  Up: c-api-embedded-server-functions

22.8.13.2 `mysql_server_end()'
..............................

`void mysql_server_end(void)'

* Description *

This function finalizes the MySQL library, which should be done when
you are done using the library. However, *Note `mysql_server_end()':
mysql-server-end. is deprecated and *Note `mysql_library_end()':
mysql-library-end. should be used instead. See *Note
mysql-library-end::.

* Return Values *

None.


File: manual.info,  Node: c-api-plugin-functions,  Next: c-api-problems,  Prev: c-api-embedded-server-functions,  Up: c-api

22.8.14 C API Client Plugin Functions
-------------------------------------

* Menu:

* mysql-client-find-plugin::     `mysql_client_find_plugin()'
* mysql-client-register-plugin::  `mysql_client_register_plugin()'
* mysql-load-plugin::            `mysql_load_plugin()'
* mysql-load-plugin-v::          `mysql_load_plugin_v()'
* mysql-plugin-options::         `mysql_plugin_options()'

This section describes functions used for the client-side plugin API.
They enable management of client plugins. For a description of the
`st_mysql_client_plugin' structure used by these functions, see *Note
client-plugin-descriptors::.

It is unlikely that a client program needs to call the functions in
this section. For example, a client that supports the use of
authentication plugins normally causes a plugin to be loaded by calling
*Note `mysql_options()': mysql-options. to set the `MYSQL_DEFAULT_AUTH'
and `MYSQL_PLUGIN_DIR' options:

     char *plugin_dir = "PATH_TO_PLUGIN_DIR";
     char *default_auth = "PLUGIN_NAME";

     /* ... process command-line options ... */

     mysql_options(&mysql, MYSQL_PLUGIN_DIR, plugin_dir);
     mysql_options(&mysql, MYSQL_DEFAULT_AUTH, default_auth);

Typically, the program will also accept `--plugin-dir' and
`--default-auth' options that enable users to override the default
values.


File: manual.info,  Node: mysql-client-find-plugin,  Next: mysql-client-register-plugin,  Prev: c-api-plugin-functions,  Up: c-api-plugin-functions

22.8.14.1 `mysql_client_find_plugin()'
......................................

`struct st_mysql_client_plugin *mysql_client_find_plugin(MYSQL *mysql,
const char *name, int type)'

* Description *

Returns a pointer to a loaded plugin, loading the plugin first if
necessary. An error occurs if the type is invalid or the plugin cannot
be found or loaded.

Specify the parameters as follows:

   * `mysql': A pointer to a `MYSQL' structure. The plugin API does not
     require a connection to a MySQL server, but this structure must be
     properly initialized. The structure is used to obtain
     connection-related information.

   * `name': The plugin name.

   * `type': The plugin type.

This function was added in MySQL 5.5.7.

* Return Values *

A pointer to the plugin for success. `NULL' if an error occurred.

* Errors *

To check for errors, call the *Note `mysql_error()': mysql-error. or
*Note `mysql_errno()': mysql-errno. function. See *Note mysql-error::,
and *Note mysql-errno::.

* Example *

     MYSQL mysql;
     struct st_mysql_client_plugin *p;

     if ((p = mysql_client_find_plugin(&mysql, "myplugin",
                                       MYSQL_CLIENT_AUTHENTICATION_PLUGIN, 0)))
     {
       printf("Plugin version: %d.%d.%d\n", p->version[0], p->version[1], p->version[2]);
     }


File: manual.info,  Node: mysql-client-register-plugin,  Next: mysql-load-plugin,  Prev: mysql-client-find-plugin,  Up: c-api-plugin-functions

22.8.14.2 `mysql_client_register_plugin()'
..........................................

`struct st_mysql_client_plugin *mysql_client_register_plugin(MYSQL
*mysql, struct st_mysql_client_plugin *plugin)'

* Description *

Adds a plugin structure to the list of loaded plugins. An error occurs
if the plugin is already loaded.

Specify the parameters as follows:

   * `mysql': A pointer to a `MYSQL' structure. The plugin API does not
     require a connection to a MySQL server, but this structure must be
     properly initialized. The structure is used to obtain
     connection-related information.

   * `plugin': A pointer to the plugin structure.

This function was added in MySQL 5.5.7.

* Return Values *

A pointer to the plugin for success. `NULL' if an error occurred.

* Errors *

To check for errors, call the *Note `mysql_error()': mysql-error. or
*Note `mysql_errno()': mysql-errno. function. See *Note mysql-error::,
and *Note mysql-errno::.


File: manual.info,  Node: mysql-load-plugin,  Next: mysql-load-plugin-v,  Prev: mysql-client-register-plugin,  Up: c-api-plugin-functions

22.8.14.3 `mysql_load_plugin()'
...............................

`struct st_mysql_client_plugin *mysql_load_plugin(MYSQL *mysql, const
char *name, int type, int argc, ...)'

* Description *

Loads a MySQL client plugin, specified by name and type. An error
occurs if the type is invalid or the plugin cannot be loaded.

It is not possible to load multiple plugins of the same type. An error
occurs if you try to load a plugin of a type already loaded.

Specify the parameters as follows:

   * `mysql': A pointer to a `MYSQL' structure. The plugin API does not
     require a connection to a MySQL server, but this structure must be
     properly initialized. The structure is used to obtain
     connection-related information.

   * `name': The name of the plugin to load.

   * `type': The type of plugin to load, or -1 to disable type
     checking. If type is not -1, only plugins matching the type are
     considered for loading.

   * `argc': The number of following arguments (0 if there are none).
     Interpretation of any following arguments depends on the plugin
     type.

This function was added in MySQL 5.5.7.

Another way to cause plugins to be loaded is to set the
`LIBMYSQL_PLUGINS' environment variable to a semicolon-separated list
of plugin names. For example:

     shell> export LIBMYSQL_PLUGINS="myplugin1;myplugin2"

Plugins named by `LIBMYSQL_PLUGINS' are loaded when the client program
calls *Note `mysql_library_init()': mysql-library-init. No error is
reported if problems occur loading these plugins.

* Return Values *

A pointer to the plugin if it was loaded successfully.  `NULL' if an
error occurred.

* Errors *

To check for errors, call the *Note `mysql_error()': mysql-error. or
*Note `mysql_errno()': mysql-errno. function. See *Note mysql-error::,
and *Note mysql-errno::.

* Example *

     MYSQL mysql;

     if(!mysql_load_plugin(&mysql, "myplugin",
                           MYSQL_CLIENT_AUTHENTICATION_PLUGIN, 0))
     {
         fprintf(stderr, "Error: %s\n", mysql_error(&mysql));
         exit(-1);
     }

* See Also *

See also *Note mysql-load-plugin::, *Note mysql-error::, *Note
mysql-errno::.


File: manual.info,  Node: mysql-load-plugin-v,  Next: mysql-plugin-options,  Prev: mysql-load-plugin,  Up: c-api-plugin-functions

22.8.14.4 `mysql_load_plugin_v()'
.................................

`struct st_mysql_client_plugin *mysql_load_plugin_v(MYSQL *mysql, const
char *name, int type, int argc, va_list args)'

* Description *

This function is equivalent to *Note `mysql_load_plugin()':
mysql-load-plugin, but it accepts a `va_list' instead of a variable list
of parameters.

This function was added in MySQL 5.5.7.

* See Also *

See also *Note mysql-load-plugin::.


File: manual.info,  Node: mysql-plugin-options,  Prev: mysql-load-plugin-v,  Up: c-api-plugin-functions

22.8.14.5 `mysql_plugin_options()'
..................................

`int mysql_plugin_options(struct st_mysql_client_plugin *plugin, const
char *option, const void *value)'

* Description *

Passes an option type and value to a plugin. This function can be
called multiple times to set several options. If the plugin does not
have an option handler, an error occurs.

Specify the parameters as follows:

   * `plugin': A pointer to the plugin structure.

   * `option': The option to be set.

   * `value': A pointer to the option value.

This function was added in MySQL 5.5.7.

* Return Values *

Zero for success, 1 if an error occurred. If the plugin has an option
handler, that handler should also return zero for success and 1 if an
error occurred.


File: manual.info,  Node: c-api-problems,  Next: auto-reconnect,  Prev: c-api-plugin-functions,  Up: c-api

22.8.15 Common Questions and Problems When Using the C API
----------------------------------------------------------

* Menu:

* null-mysql-store-result::      Why `mysql_store_result()' Sometimes Returns `NULL' After `mysql_query()' Returns Success
* query-results::                What Results You Can Get from a Query
* getting-unique-id::            How to Get the Unique ID for the Last Inserted Row


File: manual.info,  Node: null-mysql-store-result,  Next: query-results,  Prev: c-api-problems,  Up: c-api-problems

22.8.15.1 Why `mysql_store_result()' Sometimes Returns `NULL' After `mysql_query()' Returns Success
...................................................................................................

It is possible for *Note `mysql_store_result()': mysql-store-result. to
return `NULL' following a successful call to *Note `mysql_query()':
mysql-query. When this happens, it means one of the following
conditions occurred:

   * There was a `malloc()' failure (for example, if the result set was
     too large).

   * The data could not be read (an error occurred on the connection).

   * The query returned no data (for example, it was an *Note `INSERT':
     insert, *Note `UPDATE': update, or *Note `DELETE': delete.).

You can always check whether the statement should have produced a
nonempty result by calling *Note `mysql_field_count()':
mysql-field-count. If *Note `mysql_field_count()': mysql-field-count.
returns zero, the result is empty and the last query was a statement
that does not return values (for example, an *Note `INSERT': insert. or
a *Note `DELETE': delete.). If *Note `mysql_field_count()':
mysql-field-count. returns a nonzero value, the statement should have
produced a nonempty result. See the description of the *Note
`mysql_field_count()': mysql-field-count. function for an example.

You can test for an error by calling *Note `mysql_error()':
mysql-error. or *Note `mysql_errno()': mysql-errno.


File: manual.info,  Node: query-results,  Next: getting-unique-id,  Prev: null-mysql-store-result,  Up: c-api-problems

22.8.15.2 What Results You Can Get from a Query
...............................................

In addition to the result set returned by a query, you can also get the
following information:

   * *Note `mysql_affected_rows()': mysql-affected-rows.  returns the
     number of rows affected by the last query when doing an *Note
     `INSERT': insert, *Note `UPDATE': update, or *Note `DELETE':
     delete.

     For a fast re-create, use *Note `TRUNCATE TABLE': truncate-table.

   * *Note `mysql_num_rows()': mysql-num-rows. returns the number of
     rows in a result set. With *Note `mysql_store_result()':
     mysql-store-result, *Note `mysql_num_rows()': mysql-num-rows. may
     be called as soon as *Note `mysql_store_result()':
     mysql-store-result.  returns. With *Note `mysql_use_result()':
     mysql-use-result, *Note `mysql_num_rows()': mysql-num-rows. may be
     called only after you have fetched all the rows with *Note
     `mysql_fetch_row()': mysql-fetch-row.

   * *Note `mysql_insert_id()': mysql-insert-id. returns the ID
     generated by the last query that inserted a row into a table with
     an `AUTO_INCREMENT' index. See *Note mysql-insert-id::.

   * Some queries (*Note `LOAD DATA INFILE ...': load-data, *Note
     `INSERT INTO ... SELECT ...': insert-select, *Note `UPDATE':
     update.) return additional information. The result is returned by
     *Note `mysql_info()': mysql-info. See the description for *Note
     `mysql_info()': mysql-info.  for the format of the string that it
     returns.  *Note `mysql_info()': mysql-info. returns a `NULL'
     pointer if there is no additional information.


File: manual.info,  Node: getting-unique-id,  Prev: query-results,  Up: c-api-problems

22.8.15.3 How to Get the Unique ID for the Last Inserted Row
............................................................

If you insert a record into a table that contains an `AUTO_INCREMENT'
column, you can obtain the value stored into that column by calling the
*Note `mysql_insert_id()': mysql-insert-id. function.

You can check from your C applications whether a value was stored in an
`AUTO_INCREMENT' column by executing the following code (which assumes
that you've checked that the statement succeeded). It determines
whether the query was an *Note `INSERT': insert. with an
`AUTO_INCREMENT' index:

     if ((result = mysql_store_result(&mysql)) == 0 &&
         mysql_field_count(&mysql) == 0 &&
         mysql_insert_id(&mysql) != 0)
     {
         used_id = mysql_insert_id(&mysql);
     }

When a new `AUTO_INCREMENT' value has been generated, you can also
obtain it by executing a `SELECT LAST_INSERT_ID()' statement with *Note
`mysql_query()': mysql-query. and retrieving the value from the result
set returned by the statement.

When inserting multiple values, the last automatically incremented
value is returned.

For `LAST_INSERT_ID()', the most recently generated ID is maintained in
the server on a per-connection basis. It is not changed by another
client. It is not even changed if you update another `AUTO_INCREMENT'
column with a nonmagic value (that is, a value that is not `NULL' and
not `0'). Using `LAST_INSERT_ID()' and `AUTO_INCREMENT' columns
simultaneously from multiple clients is perfectly valid. Each client
will receive the last inserted ID for the last statement _that_ client
executed.

If you want to use the ID that was generated for one table and insert
it into a second table, you can use SQL statements like this:

     INSERT INTO foo (auto,text)
         VALUES(NULL,'text');         # generate ID by inserting NULL
     INSERT INTO foo2 (id,text)
         VALUES(LAST_INSERT_ID(),'text');  # use ID in second table

Note that *Note `mysql_insert_id()': mysql-insert-id.  returns the
value stored into an `AUTO_INCREMENT' column, whether that value is
automatically generated by storing `NULL' or `0' or was specified as an
explicit value.  `LAST_INSERT_ID()' returns only automatically
generated `AUTO_INCREMENT' values. If you store an explicit value other
than `NULL' or `0', it does not affect the value returned by
`LAST_INSERT_ID()'.

For more information on obtaining the last ID in an `AUTO_INCREMENT'
column:

   * For information on `LAST_INSERT_ID()', which can be used within an
     SQL statement, see *Note information-functions::.

   * For information on *Note `mysql_insert_id()': mysql-insert-id, the
     function you use from within the C API, see *Note
     mysql-insert-id::.

   * For information on obtaining the auto-incremented value when using
     Connector/J, see *Note connector-j-usagenotes-last-insert-id::.

   * For information on obtaining the auto-incremented value when using
     Connector/ODBC, see *Note
     connector-odbc-usagenotes-functionality-last-insert-id::.


File: manual.info,  Node: auto-reconnect,  Next: c-api-multiple-queries,  Prev: c-api-problems,  Up: c-api

22.8.16 Controlling Automatic Reconnection Behavior
---------------------------------------------------

The MySQL client library can perform an automatic reconnection to the
server if it finds that the connection is down when you attempt to send
a statement to the server to be executed. In this case, the library
tries once to reconnect to the server and send the statement again.

In MySQL 5.5, auto-reconnect is disabled by default.

If it is important for your application to know that the connection has
been dropped (so that is can exit or take action to adjust for the loss
of state information), be sure that auto-reconnect is disabled. To
ensure this, call *Note `mysql_options()': mysql-options. with the
`MYSQL_OPT_RECONNECT' option:

     my_bool reconnect = 0;
     mysql_options(&mysql, MYSQL_OPT_RECONNECT, &reconnect);

If the connection has gone down, the effect of *Note `mysql_ping()':
mysql-ping. depends on the auto-reconnect state. If auto-reconnect is
enabled, *Note `mysql_ping()': mysql-ping. performs a reconnect.
Otherwise, it returns an error.

Some client programs might provide the capability of controlling
automatic reconnection. For example, *Note `mysql': mysql.  reconnects
by default, but the `--skip-reconnect' option can be used to suppress
this behavior.

If an automatic reconnection does occur (for example, as a result of
calling *Note `mysql_ping()': mysql-ping.), there is no explicit
indication of it. To check for reconnection, call *Note
`mysql_thread_id()': mysql-thread-id. to get the original connection
identifier before calling *Note `mysql_ping()': mysql-ping, then call
*Note `mysql_thread_id()': mysql-thread-id. again to see whether the
identifier has changed.

Automatic reconnection can be convenient because you need not implement
your own reconnect code, but if a reconnection does occur, several
aspects of the connection state are reset on the server side and your
application will not know about it. The connection-related state is
affected as follows:

   * Any active transactions are rolled back and autocommit mode is
     reset.

   * All table locks are released.

   * All `TEMPORARY' tables are closed (and dropped).

   * Session variables are reinitialized to the values of the
     corresponding variables. This also affects variables that are set
     implicitly by statements such as `SET NAMES'.

   * User variable settings are lost.

   * Prepared statements are released.

   * *Note `HANDLER': handler. variables are closed.

   * The value of `LAST_INSERT_ID()' is reset to 0.

   * Locks acquired with `GET_LOCK()' are released.

If the connection drops, it is possible that the session associated
with the connection on the server side will still be running if the
server has not yet detected that the client is no longer connected. In
this case, any locks held by the original connection still belong to
that session, so you may want to kill it by calling *Note
`mysql_kill()': mysql-kill.


File: manual.info,  Node: c-api-multiple-queries,  Next: c-api-prepared-statement-problems,  Prev: auto-reconnect,  Up: c-api

22.8.17 C API Support for Multiple Statement Execution
------------------------------------------------------

By default, *Note `mysql_query()': mysql-query. and *Note
`mysql_real_query()': mysql-real-query. interpret their statement
string argument as a single statement to be executed, and you process
the result according to whether the statement produces a result set (a
set of rows, as for *Note `SELECT': select.) or an affected-rows count
(as for *Note `INSERT': insert, *Note `UPDATE': update, and so forth).

MySQL 5.5 also supports the execution of a string containing multiple
statements separated by semicolon (``;'') characters. This capability
is enabled by special options that are specified either when you
connect to the server with *Note `mysql_real_connect()':
mysql-real-connect. or after connecting by calling` *Note
`mysql_set_server_option()': mysql-set-server-option.

Executing a multiple-statement string can produce multiple result sets
or row-count indicators. Processing these results involves a different
approach than for the single-statement case: After handling the result
from the first statement, it is necessary to check whether more results
exist and process them in turn if so.  To support multiple-result
processing, the C API includes the *Note `mysql_more_results()':
mysql-more-results. and *Note `mysql_next_result()': mysql-next-result.
functions.  These functions are used at the end of a loop that iterates
as long as more results are available. _Failure to process the result
this way may result in a dropped connection to the server._

Multiple-result processing also is required if you execute *Note
`CALL': call. statements for stored procedures. Results from a stored
procedure have these characteristics:

   * Statements within the procedure may produce result sets (for
     example, if it executes *Note `SELECT': select.  statements).
     These result sets are returned in the order that they are produced
     as the procedure executes.

     In general, the caller cannot know how many result sets a
     procedure will return. Procedure execution may depend on loops or
     conditional statements that cause the execution path to differ
     from one call to the next. Therefore, you must be prepared to
     retrieve multiple results.

   * The final result from the procedure is a status result that
     includes no result set. The status indicates whether the procedure
     succeeded or an error occurred.

The multiple statement and result capabilities can be used only with
*Note `mysql_query()': mysql-query. or *Note `mysql_real_query()':
mysql-real-query. They cannot be used with the prepared statement
interface. Prepared statement handles are defined to work only with
strings that contain a single statement. See *Note
c-api-prepared-statements::.

To enable multiple-statement execution and result processing, the
following options may be used:

   * The *Note `mysql_real_connect()': mysql-real-connect.  function
     has a `flags' argument for which two option values are relevant:

        * `CLIENT_MULTI_RESULTS' enables the client program to process
          multiple results. This option _must_ be enabled if you execute
          *Note `CALL': call. statements for stored procedures that
          produce result sets. Otherwise, such procedures result in an
          error `Error 1312 (0A000): PROCEDURE PROC_NAME can't return a
          result set in the given context'. As of MySQL 5.5.3,
          `CLIENT_MULTI_RESULTS' is enabled by default.

        * `CLIENT_MULTI_STATEMENTS' enables *Note `mysql_query()':
          mysql-query. and *Note `mysql_real_query()':
          mysql-real-query. to execute statement strings containing
          multiple statements separated by semicolons. This option also
          enables `CLIENT_MULTI_RESULTS' implicitly, so a `flags'
          argument of `CLIENT_MULTI_STATEMENTS' to *Note
          `mysql_real_connect()': mysql-real-connect. is equivalent to
          an argument of `CLIENT_MULTI_STATEMENTS |
          CLIENT_MULTI_RESULTS'. That is, `CLIENT_MULTI_STATEMENTS' is
          sufficient to enable multiple-statement execution and all
          multiple-result processing.

   * After the connection to the server has been established, you can
     use the *Note `mysql_set_server_option()': mysql-set-server-option.
     function to enable or disable multiple-statement execution by
     passing it an argument of `MYSQL_OPTION_MULTI_STATEMENTS_ON' or
     `MYSQL_OPTION_MULTI_STATEMENTS_OFF'. Enabling multiple-statement
     execution with this function also enables processing of `simple'
     results for a multiple-statement string where each statement
     produces a single result, but is _not_ sufficient to permit
     processing of stored procedures that produce result sets.

The following procedure outlines a suggested strategy for handling
multiple statements:

  1. Pass `CLIENT_MULTI_STATEMENTS' to *Note `mysql_real_connect()':
     mysql-real-connect, to fully enable multiple-statement execution
     and multiple-result processing.

  2. After calling *Note `mysql_query()': mysql-query. or *Note
     `mysql_real_query()': mysql-real-query. and verifying that it
     succeeds, enter a loop within which you process statement results.

  3. For each iteration of the loop, handle the current statement
     result, retrieving either a result set or an affected-rows count.
     If an error occurs, exit the loop.

  4. At the end of the loop, call *Note `mysql_next_result()':
     mysql-next-result. to check whether another result exists and
     initiate retrieval for it if so. If no more results are available,
     exit the loop.

One possible implementation of the preceding strategy is shown
following. The final part of the loop can be reduced to a simple test
of whether *Note `mysql_next_result()': mysql-next-result. returns
nonzero. The code as written distinguishes between no more results and
an error, which enables a message to be printed for the latter
occurrence.

     /* connect to server with the CLIENT_MULTI_STATEMENTS option */
     if (mysql_real_connect (mysql, host_name, user_name, password,
         db_name, port_num, socket_name, CLIENT_MULTI_STATEMENTS) == NULL)
     {
       printf("mysql_real_connect() failed\n");
       mysql_close(mysql);
       exit(1);
     }

     /* execute multiple statements */
     status = mysql_query(mysql,
                          "DROP TABLE IF EXISTS test_table;\
                           CREATE TABLE test_table(id INT);\
                           INSERT INTO test_table VALUES(10);\
                           UPDATE test_table SET id=20 WHERE id=10;\
                           SELECT * FROM test_table;\
                           DROP TABLE test_table");
     if (status)
     {
       printf("Could not execute statement(s)");
       mysql_close(mysql);
       exit(0);
     }

     /* process each statement result */
     do {
       /* did current statement return data? */
       result = mysql_store_result(mysql);
       if (result)
       {
         /* yes; process rows and free the result set */
         process_result_set(mysql, result);
         mysql_free_result(result);
       }
       else          /* no result set or error */
       {
         if (mysql_field_count(mysql) == 0)
         {
           printf("%lld rows affected\n",
                 mysql_affected_rows(mysql));
         }
         else  /* some error occurred */
         {
           printf("Could not retrieve result set\n");
           break;
         }
       }
       /* more results? -1 = no, >0 = error, 0 = yes (keep looping) */
       if ((status = mysql_next_result(mysql)) > 0)
         printf("Could not execute statement\n");
     } while (status == 0);

     mysql_close(mysql);


File: manual.info,  Node: c-api-prepared-statement-problems,  Next: c-api-prepared-statement-date-handling,  Prev: c-api-multiple-queries,  Up: c-api

22.8.18 C API Prepared Statement Problems
-----------------------------------------

Here follows a list of the currently known problems with prepared
statements:

   * *Note `TIME': time, *Note `TIMESTAMP': datetime, and *Note
     `DATETIME': datetime. do not support parts of seconds (for
     example, from `DATE_FORMAT()').

   * When converting an integer to string, `ZEROFILL' is honored with
     prepared statements in some cases where the MySQL server doesn't
     print the leading zeros. (For example, with
     `MIN(NUMBER-WITH-ZEROFILL)').

   * When converting a floating-point number to a string in the client,
     the rightmost digits of the converted value may differ slightly
     from those of the original value.

   * Prepared statements use the query cache under the conditions
     described in *Note query-cache-operation::.

   * Prepared statements do not support multi-statements (that is,
     multiple statements within a single string separated by ``;''
     characters).

   * Before MySQL 5.5.3, prepared *Note `CALL': call. statements cannot
     invoke stored procedures that return result sets because prepared
     statements do not support multiple result sets. Nor can the
     calling application access a stored procedure's `OUT' or `INOUT'
     parameters when the procedure returns. As of MySQL 5.5.3, these
     capabilities are supported as described in *Note
     c-api-prepared-call-statements::.


File: manual.info,  Node: c-api-prepared-statement-date-handling,  Next: c-api-prepared-call-statements,  Prev: c-api-prepared-statement-problems,  Up: c-api

22.8.19 C API Prepared Statement Handling of Date and Time Values
-----------------------------------------------------------------

The binary (prepared statement) protocol enables you to send and
receive date and time values (*Note `DATE': datetime, *Note `TIME':
time, *Note `DATETIME': datetime, and *Note `TIMESTAMP': datetime.),
using the `MYSQL_TIME' structure. The members of this structure are
described in *Note c-api-prepared-statement-data-structures::.

To send temporal data values, create a prepared statement using *Note
`mysql_stmt_prepare()': mysql-stmt-prepare. Then, before calling *Note
`mysql_stmt_execute()': mysql-stmt-execute. to execute the statement,
use the following procedure to set up each temporal parameter:

  1. In the `MYSQL_BIND' structure associated with the data value, set
     the `buffer_type' member to the type that indicates what kind of
     temporal value you're sending. For *Note `DATE': datetime, *Note
     `TIME': time, *Note `DATETIME': datetime, or *Note `TIMESTAMP':
     datetime. values, set `buffer_type' to `MYSQL_TYPE_DATE',
     `MYSQL_TYPE_TIME', `MYSQL_TYPE_DATETIME', or
     `MYSQL_TYPE_TIMESTAMP', respectively.

  2. Set the `buffer' member of the `MYSQL_BIND' structure to the
     address of the `MYSQL_TIME' structure in which you pass the
     temporal value.

  3. Fill in the members of the `MYSQL_TIME' structure that are
     appropriate for the type of temporal value to be passed.

Use *Note `mysql_stmt_bind_param()': mysql-stmt-bind-param. to bind the
parameter data to the statement. Then you can call *Note
`mysql_stmt_execute()': mysql-stmt-execute.

To retrieve temporal values, the procedure is similar, except that you
set the `buffer_type' member to the type of value you expect to
receive, and the `buffer' member to the address of a `MYSQL_TIME'
structure into which the returned value should be placed. Use *Note
`mysql_stmt_bind_result()': mysql-stmt-bind-result. to bind the buffers
to the statement after calling *Note `mysql_stmt_execute()':
mysql-stmt-execute. and before fetching the results.

Here is a simple example that inserts *Note `DATE': datetime, *Note
`TIME': time, and *Note `TIMESTAMP': datetime. data. The `mysql'
variable is assumed to be a valid connection handle.


       MYSQL_TIME  ts;
       MYSQL_BIND  bind[3];
       MYSQL_STMT  *stmt;

       strmov(query, "INSERT INTO test_table(date_field, time_field, \
                                    timestamp_field) VALUES(?,?,?");

       stmt = mysql_stmt_init(mysql);
       if (!stmt)
       {
         fprintf(stderr, " mysql_stmt_init(), out of memory\n");
         exit(0);
       }
       if (mysql_stmt_prepare(mysql, query, strlen(query)))
       {
         fprintf(stderr, "\n mysql_stmt_prepare(), INSERT failed");
         fprintf(stderr, "\n %s", mysql_stmt_error(stmt));
         exit(0);
       }

       /* set up input buffers for all 3 parameters */
       bind[0].buffer_type= MYSQL_TYPE_DATE;
       bind[0].buffer= (char *)&ts;
       bind[0].is_null= 0;
       bind[0].length= 0;
       ...
       bind[1]= bind[2]= bind[0];
       ...

       mysql_stmt_bind_param(stmt, bind);

       /* supply the data to be sent in the ts structure */
       ts.year= 2002;
       ts.month= 02;
       ts.day= 03;

       ts.hour= 10;
       ts.minute= 45;
       ts.second= 20;

       mysql_stmt_execute(stmt);
       ..


File: manual.info,  Node: c-api-prepared-call-statements,  Prev: c-api-prepared-statement-date-handling,  Up: c-api

22.8.20 C API Support for Prepared `CALL' Statements
----------------------------------------------------

This section describes prepared-statement support in the C API for
stored procedures executed using *Note `CALL': call. statements:

Prior to MySQL 5.5.3, prepared *Note `CALL': call.  statements can be
used only for stored procedures that produce at most one result set.
Nor can the calling application use placeholders for `OUT' or `INOUT'
parameters.

MySQL 5.5.3 expands support for stored procedures executed using
prepared *Note `CALL': call. statements in the following ways:

   * A stored procedure can produce any number of result sets. The
     number of columns and the data types of the columns need not be
     the same for all result sets.

   * The final values of `OUT' and `INOUT' parameters are available to
     the calling application after the procedure returns. These
     parameters are returned as an extra single-row result set
     following any result sets produced by the procedure itself.  The
     row contains the values of the `OUT' and `INOUT' parameters in the
     order in which they are declared in the procedure parameter list.

The following discussion shows how to use these capabilities through
the C API for prepared statements. To use prepared *Note `CALL': call.
statements through the *Note `PREPARE': prepare. and *Note `EXECUTE':
execute. statements, see *Note call::.

If an application might be compiled or executed in a context where a
version of MySQL older than 5.5.3 is used, prepared *Note `CALL': call.
capabilities for multiple result sets and `OUT' or `INOUT' parameters
might not be available:

   * For the client side, the application will not compile unless the
     libraries are from MySQL 5.5.3 or higher (the API function and
     symbols introduced in that version will not be present).

   * To verify at runtime that the server is recent enough, a client
     can use this test:

          if (mysql_get_server_version(mysql) < 50503)
          {
            fprintf(stderr,
                    "Server does not support required CALL capabilities\n");
            mysql_close(mysql);
            exit (1);
          }

An application that executes a prepared *Note `CALL': call. statement
should use a loop that fetches a result and then invokes *Note
`mysql_stmt_next_result()': mysql-stmt-next-result. to determine
whether there are more results. The results consist of any result sets
produced by the stored procedure followed by a final status value that
indicates whether the procedure terminated successfully.

If the procedure has `OUT' or `INOUT' parameters, the result set
preceding the final status value contains their values. To determine
whether a result set contains parameter values, test whether the
`SERVER_PS_OUT_PARAMS' bit is set in the `server_status' member of the
`MYSQL' connection handler:

     mysql->server_status & SERVER_PS_OUT_PARAMS

The following example uses a prepared *Note `CALL': call. statement to
execute a stored procedure that produces multiple result sets and that
provides parameter values back to the caller by means of `OUT' and
`INOUT' parameters.  The procedure takes parameters of all three types
(`IN', `OUT', `INOUT'), displays their initial values, assigns new
values, displays the updated values, and returns. The expected return
information from the procedure therefore consists of multiple result
sets and a final status:

   * One result set from a *Note `SELECT': select.  that displays the
     initial parameter values: `10', `NULL', `30'. (The `OUT' parameter
     is assigned a value by the caller, but this assignment is expected
     to be ineffective: `OUT' parameters are seen as `NULL' within a
     procedure until assigned a value within the procedure.)

   * One result set from a *Note `SELECT': select.  that displays the
     modified parameter values: `100', `200', `300'.

   * One result set containing the final `OUT' and `INOUT' parameter
     values: `200', `300'.

   * A final status packet.

The code to execute the procedure:

     MYSQL_STMT *stmt;
     MYSQL_BIND ps_params[3];  /* input parameter buffers */
     int        int_data[3];   /* input/output values */
     my_bool    is_null[3];    /* output value nullability */
     int        status;

     /* set up stored procedure */
     status = mysql_query(mysql, "DROP PROCEDURE IF EXISTS p1");
     test_error(mysql, status);

     status = mysql_query(mysql,
       "CREATE PROCEDURE p1("
       "  IN p_in INT, "
       "  OUT p_out INT, "
       "  INOUT p_inout INT) "
       "BEGIN "
       "  SELECT p_in, p_out, p_inout; "
       "  SET p_in = 100, p_out = 200, p_inout = 300; "
       "  SELECT p_in, p_out, p_inout; "
       "END");
     test_error(mysql, status);

     /* initialize and prepare CALL statement with parameter placeholders */
     stmt = mysql_stmt_init(mysql);
     if (!stmt)
     {
       printf("Could not initialize statement\n");
       exit(1);
     }
     status = mysql_stmt_prepare(stmt, "CALL p1(?, ?, ?)", 16);
     test_stmt_error(stmt, status);

     /* initialize parameters: p_in, p_out, p_inout (all INT) */
     memset(ps_params, 0, sizeof (ps_params));

     ps_params[0].buffer_type = MYSQL_TYPE_LONG;
     ps_params[0].buffer = (char *) &int_data[0];
     ps_params[0].length = 0;
     ps_params[0].is_null = 0;

     ps_params[1].buffer_type = MYSQL_TYPE_LONG;
     ps_params[1].buffer = (char *) &int_data[1];
     ps_params[1].length = 0;
     ps_params[1].is_null = 0;

     ps_params[2].buffer_type = MYSQL_TYPE_LONG;
     ps_params[2].buffer = (char *) &int_data[2];
     ps_params[2].length = 0;
     ps_params[2].is_null = 0;

     /* bind parameters */
     status = mysql_stmt_bind_param(stmt, ps_params);
     test_stmt_error(stmt, status);

     /* assign values to parameters and execute statement */
     int_data[0]= 10;  /* p_in */
     int_data[1]= 20;  /* p_out */
     int_data[2]= 30;  /* p_inout */

     status = mysql_stmt_execute(stmt);
     test_stmt_error(stmt, status);

     /* process results until there are no more */
     do {
       int i;
       int num_fields;       /* number of columns in result */
       MYSQL_FIELD *fields;  /* for result set metadata */
       MYSQL_BIND *rs_bind;  /* for output buffers */

       /* the column count is > 0 if there is a result set */
       /* 0 if the result is only the final status packet */
       num_fields = mysql_stmt_field_count(stmt);

       if (num_fields > 0)
       {
         /* there is a result set to fetch */
         printf("Number of columns in result: %d\n", (int) num_fields);

         /* what kind of result set is this? */
         printf("Data: ");
         if(mysql->server_status & SERVER_PS_OUT_PARAMS)
           printf("this result set contains OUT/INOUT parameters\n");
         else
           printf("this result set is produced by the procedure\n");

         MYSQL_RES *rs_metadata = mysql_stmt_result_metadata(stmt);
         test_stmt_error(stmt, rs_metadata == NULL);

         fields = mysql_fetch_fields(rs_metadata);

         rs_bind = (MYSQL_BIND *) malloc(sizeof (MYSQL_BIND) * num_fields);
         if (!rs_bind)
         {
           printf("Cannot allocate output buffers\n");
           exit(1);
         }
         memset(rs_bind, 0, sizeof (MYSQL_BIND) * num_fields);

         /* set up and bind result set output buffers */
         for (i = 0; i < num_fields; ++i)
         {
           rs_bind[i].buffer_type = fields[i].type;
           rs_bind[i].is_null = &is_null[i];

           switch (fields[i].type)
           {
             case MYSQL_TYPE_LONG:
               rs_bind[i].buffer = (char *) &(int_data[i]);
               rs_bind[i].buffer_length = sizeof (int_data);
               break;

             default:
               fprintf(stderr, "ERROR: unexpected type: %d.\n", fields[i].type);
               exit(1);
           }
         }

         status = mysql_stmt_bind_result(stmt, rs_bind);
         test_stmt_error(stmt, status);

         /* fetch and display result set rows */
         while (1)
         {
           status = mysql_stmt_fetch(stmt);

           if (status == 1 || status == MYSQL_NO_DATA)
             break;

           for (i = 0; i < num_fields; ++i)
           {
             switch (rs_bind[i].buffer_type)
             {
               case MYSQL_TYPE_LONG:
                 if (*rs_bind[i].is_null)
                   printf(" val[%d] = NULL;", i);
                 else
                   printf(" val[%d] = %ld;",
                          i, (long) *((int *) rs_bind[i].buffer));
                 break;

               default:
                 printf("  unexpected type (%d)\n",
                   rs_bind[i].buffer_type);
             }
           }
           printf("\n");
         }

         mysql_free_result(rs_metadata); /* free metadata */
         free(rs_bind);                  /* free output buffers */
       }
       else
       {
         /* no columns = final status packet */
         printf("End of procedure output\n");
       }

       /* more results? -1 = no, >0 = error, 0 = yes (keep looking) */
       status = mysql_stmt_next_result(stmt);
       if (status > 0)
         test_stmt_error(stmt, status);
     } while (status == 0);

     mysql_stmt_close(stmt);

Execution of the procedure should produce the following output:

     Number of columns in result: 3
     Data: this result set is produced by the procedure
      val[0] = 10; val[1] = NULL; val[2] = 30;
     Number of columns in result: 3
     Data: this result set is produced by the procedure
      val[0] = 100; val[1] = 200; val[2] = 300;
     Number of columns in result: 2
     Data: this result set contains OUT/INOUT parameters
      val[0] = 200; val[1] = 300;
     End of procedure output

The code uses two utility routines, `test_error()' and
`test_stmt_error()', to check for errors and terminate after printing
diagnostic information if an error occurred:

     static void test_error(MYSQL *mysql, int status)
     {
       if (status)
       {
         fprintf(stderr, "Error: %s (errno: %d)\n",
                 mysql_error(mysql), mysql_errno(mysql));
         exit(1);
       }
     }

     static void test_stmt_error(MYSQL_STMT *stmt, int status)
     {
       if (status)
       {
         fprintf(stderr, "Error: %s (errno: %d)\n",
                 mysql_stmt_error(stmt), mysql_stmt_errno(stmt));
         exit(1);
       }
     }


File: manual.info,  Node: apis-php,  Next: apis-perl,  Prev: c-api,  Up: connectors-apis

22.9 MySQL PHP API
==================

* Menu:

* apis-php-mysqlinfo::           Overview of the MySQL PHP drivers
* apis-php-book.mysqlnd-ms::     Mysqlnd replication and load balancing plugin (`mysqlnd_ms')
* apis-php-book.mysqlnd-qc::     Mysqlnd query result cache plugin (`mysqlnd_qc')
* apis-php-book.mysqlnd-uh::     Mysqlnd user handler plugin (`mysqlnd_uh')
* apis-php-book.mysqlnd-mux::    Mysqlnd connection multiplexing plugin (`mysqlnd_mux')
* apis-php-book.mysqlnd-memcache::  Mysqlnd Memcache plugin (`mysqlnd_memcache')
* connector-php::                Connector/PHP
* apis-php-problems::            Common Problems with MySQL and PHP
* php-mysql-mysqli::             Enabling Both `mysql' and `mysqli' in PHP

PHP is a server-side, HTML-embedded scripting language that may be used
to create dynamic Web pages. It is available for most operating systems
and Web servers, and can access most common databases, including MySQL.
PHP may be run as a separate program or compiled as a module for use
with a Web server.

PHP provides three different MySQL API extensions:

   * See section "apis-php-mysqli" in the online manual: Stands for
     `MySQL, Improved'; this extension is available as of PHP 5.0.0.
     It is intended for use with MySQL 4.1.1 and later. This extension
     fully supports the authentication protocol used in MySQL 5.0, as
     well as the Prepared Statements and Multiple Statements APIs. In
     addition, this extension provides an advanced, object-oriented
     programming interface.

   * See section "apis-php-ref.pdo-mysql" in the online manual: Not its
     own API, but instead it's a MySQL driver for the PHP database
     abstraction layer PDO (PHP Data Objects). The PDO MySQL driver
     sits in the layer below PDO itself, and provides MySQL-specific
     functionality. This extension is available as of PHP 5.1.0.

   * See section "apis-php-mysql" in the online manual: Available for
     PHP versions 4 and 5, this extension is intended for use with
     MySQL versions prior to MySQL 4.1. This extension does not support
     the improved authentication protocol used in MySQL 4.1, nor does
     it support prepared statements or multiple statements. To use this
     extension with MySQL 4.1, you will likely configure the MySQL
     server to set the `old_passwords' system variable to 1 (see *Note
     old-client::).

     *Warning*:

     This extension was removed from PHP 5.5.0. All users must migrate
     to either `mysqli' or `PDO_MySQL'. For further information, see
     *Note apis-php-mysqlinfo.api.choosing::.

The PHP distribution and documentation are available from the PHP Web
site (http://www.php.net/).

_Portions of this section are Copyright (c) 1997-2012 the PHP
Documentation Group_ This material may be distributed only subject to
the terms and conditions set forth in the Creative Commons Attribution
3.0 License or later. A copy of the Creative Commons Attribution 3.0
license is distributed with this manual. The latest version is
presently available at http://creativecommons.org/licenses/by/3.0/
(http://creativecommons.org/licenses/by/3.0/).


File: manual.info,  Node: apis-php-mysqlinfo,  Next: apis-php-book.mysqlnd-ms,  Prev: apis-php,  Up: apis-php

22.9.1 Overview of the MySQL PHP drivers
----------------------------------------

* Menu:

* apis-php-mysqlinfo.intro::     Introduction
* apis-php-mysqlinfo.terminology::  Terminology overview
* apis-php-mysqlinfo.api.choosing::  Choosing an API
* apis-php-mysqlinfo.library.choosing::  Choosing a library
* apis-php-mysqlinfo.concepts::  Concepts

Copyright 1997-2012 the PHP Documentation Group.


File: manual.info,  Node: apis-php-mysqlinfo.intro,  Next: apis-php-mysqlinfo.terminology,  Prev: apis-php-mysqlinfo,  Up: apis-php-mysqlinfo

22.9.1.1 Introduction
.....................

There are three PHP APIs for accessing the MySQL database. This guide
explains the *Note terminology: apis-php-mysqlinfo.terminology.  used
to describe each API, information about *Note choosing which API:
apis-php-mysqlinfo.api.choosing. to use, and also information to help
choose which MySQL *Note library to use:
apis-php-mysqlinfo.library.choosing. with the API.


File: manual.info,  Node: apis-php-mysqlinfo.terminology,  Next: apis-php-mysqlinfo.api.choosing,  Prev: apis-php-mysqlinfo.intro,  Up: apis-php-mysqlinfo

22.9.1.2 Terminology overview
.............................

Copyright 1997-2012 the PHP Documentation Group.

This section provides an introduction to the options available to you
when developing a PHP application that needs to interact with a MySQL
database.

_What is an API?_

An Application Programming Interface, or API, defines the classes,
methods, functions and variables that your application will need to
call in order to carry out its desired task. In the case of PHP
applications that need to communicate with databases the necessary APIs
are usually exposed via PHP extensions.

APIs can be procedural or object-oriented. With a procedural API you
call functions to carry out tasks, with the object-oriented API you
instantiate classes and then call methods on the resulting objects. Of
the two the latter is usually the preferred interface, as it is more
modern and leads to better organized code.

When writing PHP applications that need to connect to the MySQL server
there are several API options available. This document discusses what
is available and how to select the best solution for your application.

_What is a Connector?_

In the MySQL documentation, the term _connector_ refers to a piece of
software that allows your application to connect to the MySQL database
server.  MySQL provides connectors for a variety of languages, including
PHP.

If your PHP application needs to communicate with a database server you
will need to write PHP code to perform such activities as connecting to
the database server, querying the database and other database-related
functions. Software is required to provide the API that your PHP
application will use, and also handle the communication between your
application and the database server, possibly using other intermediate
libraries where necessary. This software is known generically as a
connector, as it allows your application to _connect_ to a database
server.

_What is a Driver?_

A driver is a piece of software designed to communicate with a specific
type of database server. The driver may also call a library, such as
the MySQL Client Library or the MySQL Native Driver. These libraries
implement the low-level protocol used to communicate with the MySQL
database server.

By way of an example, the PHP Data Objects (PDO) database abstraction
layer may use one of several database-specific drivers. One of the
drivers it has available is the PDO MYSQL driver, which allows it to
interface with the MySQL server.

Sometimes people use the terms connector and driver interchangeably,
this can be confusing. In the MySQL-related documentation the term
`driver' is reserved for software that provides the database-specific
part of a connector package.

_What is an Extension?_

In the PHP documentation you will come across another term -
_extension_. The PHP code consists of a core, with optional extensions
to the core functionality. PHP's MySQL-related extensions, such as the
`mysqli' extension, and the `mysql' extension, are implemented using
the PHP extension framework.

An extension typically exposes an API to the PHP programmer, to allow
its facilities to be used programmatically. However, some extensions
which use the PHP extension framework do not expose an API to the PHP
programmer.

The PDO MySQL driver extension, for example, does not expose an API to
the PHP programmer, but provides an interface to the PDO layer above it.

The terms API and extension should not be taken to mean the same thing,
as an extension may not necessarily expose an API to the programmer.


File: manual.info,  Node: apis-php-mysqlinfo.api.choosing,  Next: apis-php-mysqlinfo.library.choosing,  Prev: apis-php-mysqlinfo.terminology,  Up: apis-php-mysqlinfo

22.9.1.3 Choosing an API
........................

Copyright 1997-2012 the PHP Documentation Group.

PHP offers three different APIs to connect to MySQL. Below we show the
APIs provided by the mysql, mysqli, and PDO extensions. Each code
snippet creates a connection to a MySQL server running on "example.com"
using the username "user" and the password "password". And a query is
run to greet the user.


     <?php
     // mysqli
     $mysqli = new mysqli("example.com", "user", "password", "database");
     $result = $mysqli->query("SELECT 'Hello, dear MySQL user!' AS _message FROM DUAL");
     $row = $result->fetch_assoc();
     echo htmlentities($row['_message']);

     // PDO
     $pdo = new PDO('mysql:host=example.com;dbname=database', 'user', 'password');
     $statement = $pdo->query("SELECT 'Hello, dear MySQL user!' AS _message FROM DUAL");
     $row = $statement->fetch(PDO::FETCH_ASSOC);
     echo htmlentities($row['_message']);

     // mysql
     $c = mysql_connect("example.com", "user", "password");
     mysql_select_db("database");
     $result = mysql_query("SELECT 'Hello, dear MySQL user!' AS _message FROM DUAL");
     $row = mysql_fetch_assoc($result);
     echo htmlentities($row['_message']);
     ?>

_Recommended API_

It is recommended to use either the See section "apis-php-mysqli" in
the online manual or See section "apis-php-ref.pdo-mysql" in the online
manual extensions. It is not recommended to use the old mysql extension
for new development, as it has been deprecated as of PHP 5.5.0 and will
be removed in the future. A detailed feature comparison matrix is
provided below. The overall performance of all three extensions is
considered to be about the same. Although the performance of the
extension contributes only a fraction of the total run time of a PHP
web request. Often, the impact is as low as 0.1%.

_Feature comparison_

Unknown PHP API feature.

                   ext/mysqli         PDO_MySQL          ext/mysql
PHP version        5.0                5.1                2.0
introduced                                               
Included with PHP  Yes                Yes                Yes
5.x                                                      
Development status Active             Active             Maintenance only
Lifecycle          Active             Active             Deprecated
Recommended for    Yes                Yes                No
new projects                                             
OOP Interface      Yes                Yes                No
Procedural         Yes                No                 Yes
Interface                                                
API supports       Yes                No                 No
non-blocking,                                            
asynchronous                                             
queries with                                             
mysqlnd                                                  
Persistent         Yes                Yes                Yes
Connections                                              
API supports       Yes                Yes                Yes
Charsets                                                 
API supports       Yes                Yes                No
server-side                                              
Prepared                                                 
Statements                                               
API supports       No                 Yes                No
client-side                                              
Prepared                                                 
Statements                                               
API supports       Yes                Yes                No
Stored Procedures                                        
API supports       Yes                Most               No
Multiple                                                 
Statements                                               
API supports       Yes                Yes                No
Transactions                                             
Transactions can   Yes                Yes                Yes
be controlled                                            
with SQL                                                 
Supports all       Yes                Most               No
MySQL 5.1+                                               
functionality                                            


File: manual.info,  Node: apis-php-mysqlinfo.library.choosing,  Next: apis-php-mysqlinfo.concepts,  Prev: apis-php-mysqlinfo.api.choosing,  Up: apis-php-mysqlinfo

22.9.1.4 Choosing a library
...........................

Copyright 1997-2012 the PHP Documentation Group.

The mysqli, PDO_MySQL and mysql PHP extensions are lightweight wrappers
on top of a C client library. The extensions can either use the See
section "apis-php-mysqli" in the online manual library or the
`libmysqlclient' library. Choosing a library is a compile time decision.

The mysqlnd library is part of the PHP distribution since 5.3.0.  It
offers features like lazy connections and query caching, features that
are not available with libmysqlclient, so using the built-in mysqlnd
library is highly recommended. See the See section "apis-php-mysqli" in
the online manual for additional details, and a listing of features and
functionality that it offers.


     // Recommended, compiles with mysqlnd
     $ ./configure --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --with-mysql=mysqlnd

     // Not recommended, compiles with libmysqlclient
     $ ./configure --with-mysqli=/path/to/mysql_config --with-pdo-mysql=/path/to/mysql_config --with-mysql=/path/to/mysql_config

_Library feature comparison_

It is recommended to use the See section "apis-php-mysqli" in the
online manual library instead of the MySQL Client Server library
(libmysqlclient). Both libraries are supported and constantly being
improved.

Unknown PHP API feature.

                         MySQL native driver      MySQL client server
                         (See section             library
                         "apis-php-mysqli" in     (`libmysqlclient')
                         the online manual)       
Part of the PHP          Yes                      No
distribution                                      
PHP version introduced   5.3.0                    N/A
License                  PHP License 3.01         Dual-License
Development status       Active                   Active
Lifecycle                No end announced         No end announced
PHP 5.4 compile default  Yes                      No
(for all MySQL                                    
extensions)                                       
PHP 5.3 compile default  No                       Yes
(for all MySQL                                    
extensions)                                       
Compression protocol     Yes (5.3.1+)             Yes
support                                           
SSL support              Yes (5.3.3+)             Yes
Named pipe support       Yes (5.3.4+)             Yes
Non-blocking,            Yes                      No
asynchronous queries                              
Performance statistics   Yes                      No
LOAD LOCAL INFILE        Yes                      No
respects the                                      
open_basedir directive                            
(http://www.php.net/ini.open-basedir)                         
Uses PHP's native        Yes                      No
memory management                                 
system (e.g., follows                             
PHP memory limits)                                
Return numeric column    Yes                      No
as double (COM_QUERY)                             
Return numeric column    Yes                      Yes
as string (COM_QUERY)                             
Plugin API               Yes                      Limited
Read/Write splitting     Yes, with plugin         No
for MySQL Replication                             
Load Balancing           Yes, with plugin         No
Fail over                Yes, with plugin         No
Lazy connections         Yes, with plugin         No
Query caching            Yes, with plugin         No
Transparent query        Yes, with plugin         No
manipulations (E.g.,                              
auto-EXPLAIN or                                   
monitoring)                                       


File: manual.info,  Node: apis-php-mysqlinfo.concepts,  Prev: apis-php-mysqlinfo.library.choosing,  Up: apis-php-mysqlinfo

22.9.1.5 Concepts
.................

* Menu:

* apis-php-mysqlinfo.concepts.buffering::  Buffered and Unbuffered queries
* apis-php-mysqlinfo.concepts.charset::  Character sets

Copyright 1997-2012 the PHP Documentation Group.

These concepts are specific to the MySQL drivers for PHP.


File: manual.info,  Node: apis-php-mysqlinfo.concepts.buffering,  Next: apis-php-mysqlinfo.concepts.charset,  Prev: apis-php-mysqlinfo.concepts,  Up: apis-php-mysqlinfo.concepts

22.9.1.6 Buffered and Unbuffered queries
........................................

Copyright 1997-2012 the PHP Documentation Group.

Queries are using the buffered mode by default. This means that query
results are immediately transferred from the MySQL Server to PHP in is
then kept in the memory of the PHP process. This allows additional
operations like counting the number of rows, and moving (seeking) the
current result pointer. It also allows issuing further queries on the
same connection while working on the result set. The downside of the
buffered mode is that larger result sets might require quite a lot
memory. The memory will be kept occupied till all references to the
result set are unset or the result set was explicitly freed, which will
automatically happen during request end the latest. The terminology
"store result" is also used for buffered mode, as the whole result set
is stored at once.

*Note*:

When using libmysqlclient as library PHP's memory limit won't count the
memory used for result sets unless the data is fetched into PHP
variables. With mysqlnd the memory accounted for will include the full
result set.

Unbuffered MySQL queries execute the query and then return a resource
while the data is still waiting on the MySQL server for being fetched.
This uses less memory on the PHP-side, but can increase the load on the
server. Unless the full result set was fetched from the server no
further queries can be sent over the same connection. Unbuffered
queries can also be referred to as "use result".

Following these characteristics buffered queries should be used in
cases where you expect only a limited result set or need to know the
amount of returned rows before reading all rows.  Unbuffered mode
should be used when you expect larger results.

Because buffered queries are the default, the examples below will
demonstrate how to execute unbuffered queries with each API.


     <?php
     $mysqli  = new mysqli("localhost", "my_user", "my_password", "world");
     $uresult = $mysqli->query("SELECT Name FROM City", MYSQLI_USE_RESULT);

     if ($uresult) {
        while ($row = $uresult->fetch_assoc()) {
            echo $row['Name'] . PHP_EOL;
        }
     }
     $uresult->close();
     ?>


     <?php
     $pdo = new PDO("mysql:host=localhost;dbname=world", 'my_user', 'my_pass');
     $pdo->setAttribute(PDO::MYSQL_ATTR_USE_BUFFERED_QUERY, false);

     $uresult = $pdo->query("SELECT Name FROM City");
     if ($uresult) {
        while ($row = $uresult->fetch(PDO::FETCH_ASSOC)) {
            echo $row['Name'] . PHP_EOL;
        }
     }
     ?>


     <?php
     $conn = mysql_connect("localhost", "my_user", "my_pass");
     $db   = mysql_select_db("world");

     $uresult = mysql_unbuffered_query("SELECT Name FROM City");
     if ($uresult) {
        while ($row = mysql_fetch_assoc($uresult)) {
            echo $row['Name'] . PHP_EOL;
        }
     }
     ?>


File: manual.info,  Node: apis-php-mysqlinfo.concepts.charset,  Prev: apis-php-mysqlinfo.concepts.buffering,  Up: apis-php-mysqlinfo.concepts

22.9.1.7 Character sets
.......................

Copyright 1997-2012 the PHP Documentation Group.

Ideally a proper character set will be set at the server level, and
doing this is described within the Character Set Configuration
(http://dev.mysql.com/doc/mysql/en/charset-configuration.html) section
of the MySQL Server manual.  Alternatively, each MySQL API offers a
method to set the character set at runtime.

*The character set and character escaping*:

The character set should be understood and defined, as it has an affect
on every action, and includes security implications.  For example, the
escaping mechanism (e.g., `mysqli_real_escape_string' for mysqli,
`mysql_real_escape_string' for mysql, and `PDO::quote'
(http://www.php.net/PDO::quote) for PDO_MySQL) will adhere to this
setting. It is important to realize that these functions will not use
the character set that is defined with a query, so for example the
following will not have an effect on them:


     <?php

     $mysqli = new mysqli("localhost", "my_user", "my_password", "world");

     // Will not affect $mysqli->real_escape_string();
     $mysqli->query("SET NAMES utf8");

     // Will not affect $mysqli->real_escape_string();
     $mysqli->query("SET CHARACTER SET utf8");

     // But, this will affect $mysqli->real_escape_string();
     $mysqli->set_charset('utf8');

     ?>

Below are examples that demonstrate how to properly alter the character
set at runtime using each each API.


     <?php

     $mysqli = new mysqli("localhost", "my_user", "my_password", "world");

     if (!$mysqli->set_charset('utf8')) {
         printf("Error loading character set utf8: %s\n", $mysqli->error);
     } else {
         printf("Current character set: %s\n", $mysqli->character_set_name());
     }

     print_r( $mysqli->get_charset() );

     ?>

Note: This only works as of PHP 5.3.6.


     <?php
     $pdo = new PDO("mysql:host=localhost;dbname=world;charset=utf8", 'my_user', 'my_pass');
     ?>


     <?php

     $conn = mysql_connect("localhost", "my_user", "my_pass");
     $db   = mysql_select_db("world");

     if (!mysql_set_charset('utf8', $conn)) {
         echo "Error: Unable to set the character set.\n";
         exit;
     }

     echo 'Your current character set is: ' .  mysql_client_encoding($conn);

     ?>


File: manual.info,  Node: apis-php-book.mysqlnd-ms,  Next: apis-php-book.mysqlnd-qc,  Prev: apis-php-mysqlinfo,  Up: apis-php

22.9.2 Mysqlnd replication and load balancing plugin (`mysqlnd_ms')
-------------------------------------------------------------------

* Menu:

* apis-php-mysqlnd-ms.key-features::  Key Features
* apis-php-mysqlnd-ms.limitations::  Limitations
* apis-php-mysqlnd-ms.name::     On the name
* apis-php-mysqlnd-ms.quickstart::  Quickstart and Examples
* apis-php-mysqlnd-ms.concepts::  Concepts
* apis-php-mysqlnd-ms.setup::    Installing/Configuring
* apis-php-mysqlnd-ms.constants::  Predefined Constants
* apis-php-ref.mysqlnd-ms::      Mysqlnd_ms Functions
* apis-php-mysqlnd-ms.changes::  Change History

Copyright 1997-2012 the PHP Documentation Group.

The mysqlnd replication and load balancing plugin (`mysqlnd_ms') adds
easy to use MySQL replication support to all PHP MySQL extensions that
use See section "apis-php-mysqli" in the online manual.

As of version PHP 5.3.3 the MySQL native driver for PHP (`mysqlnd')
features an internal plugin C API. C plugins, such as the replication
and load balancing plugin, can extend the functionality of See section
"apis-php-mysqli" in the online manual.

The MySQL native driver for PHP is a C library that ships together with
PHP as of PHP 5.3.0. It serves as a drop-in replacement for the MySQL
Client Library (libmysqlclient). Using mysqlnd has several advantages:
no extra downloads are required because it's bundled with PHP, it's
under the PHP license, there is lower memory consumption in certain
cases, and it contains new functionality such as asynchronous queries.

Mysqlnd plugins like `mysqlnd_ms' operate, for the most part,
transparently from a user perspective. The replication and load
balancing plugin supports all PHP applications, and all MySQL PHP
extensions. It does not change existing APIs. Therefore, it can easily
be used with existing PHP applications.


File: manual.info,  Node: apis-php-mysqlnd-ms.key-features,  Next: apis-php-mysqlnd-ms.limitations,  Prev: apis-php-book.mysqlnd-ms,  Up: apis-php-book.mysqlnd-ms

22.9.2.1 Key Features
.....................

Copyright 1997-2012 the PHP Documentation Group.

The key features of PECL/mysqlnd_ms are as follows.

   * Transparent and therefore easy to use.

        * Supports all of the PHP MySQL extensions.

        * SSL support.

        * A consistent API.

        * Little to no application changes required, dependent on the
          required usage scenario.

        * Lazy connections: connections to master and slave servers are
          not opened before a SQL statement is executed.

        * Optional: automatic use of master after the first write in a
          web request, to lower the possible impact of replication lag.

   * Can be used with any MySQL clustering solution.

        * MySQL Replication: Read-write splitting is done by the
          plugin. Primary focus of the plugin.

        * MySQL Cluster: Read-write splitting can be disabled.
          Configuration of multiple masters possible

        * Third-party solutions: the plugin is optimized for MySQL
          Replication but can be used with any other kind of MySQL
          clustering solution.

   * Featured read-write split strategies

        * Automatic detection of SELECT.

        * Supports SQL hints to overrule automatism.

        * User-defined.

        * Can be disabled for, for example, when using synchronous
          clusters such as MySQL Cluster.

   * Featured load balancing strategies

        * Round Robin: choose a different slave in round-robin fashion
          for every slave request.

        * Random: choose a random slave for every slave request.

        * Random once (sticky): choose a random slave once to run all
          slave requests for the duration of a web request.

        * User-defined. The application can register callbacks with
          mysqlnd_ms.

        * PHP 5.4.0 or newer: transaction aware when using API calls
          only to control transactions.

        * Weighted load balancing: servers can be assigned different
          priorities, for example, to direct more requests to a
          powerful machine than to another less powerful machine. Or,
          to prefer nearby machines to reduce latency.

   * Global transaction ID

        * Client-side emulation. Makes manual master server failover
          and slave promotion easier with asynchronous clusters, such
          as MySQL Replication.

        * Support for built-in global transaction identifier feature of
          MySQL 5.6.5 or newer.

        * Supports using transaction ids to identify up-to-date
          asynchronous slaves for reading when session consistency is
          required.

        * Throttling: optionally, the plugin can wait for a slave to
          become "synchronous" before continuing.

   * Service and consistency levels

        * Applications can request eventual, session and strong
          consistency service levels for connections.  Appropriate
          cluster nodes will be searched automatically.

        * Eventual consistent MySQL Replication slave accesses can be
          replaced with fast local cache accesses transparently to
          reduce server load.

   * Partitioning and sharding

        * Servers of a replication cluster can be organized into
          groups. SQL hints can be used to manually direct queries to a
          specific group. Grouping can be used to partition (shard) the
          data, or to cure the issue of hotspots with updates.

        * MySQL Replication filters are supported through the table
          filter.


File: manual.info,  Node: apis-php-mysqlnd-ms.limitations,  Next: apis-php-mysqlnd-ms.name,  Prev: apis-php-mysqlnd-ms.key-features,  Up: apis-php-book.mysqlnd-ms

22.9.2.2 Limitations
....................

Copyright 1997-2012 the PHP Documentation Group.

The built-in read-write-split mechanism is very basic. Every query
which starts with `SELECT' is considered a read request to be sent to a
MySQL slave server. All other queries (such as `SHOW' statements) are
considered as write requests that are sent to the MySQL master server.
The build-in behavior can be overruled using *Note SQL hints:
apis-php-mysqlnd-ms.constants, or a user-defined callback function.

The read-write splitter is not aware of multi-statements.
Multi-statements are considered as one statement. The decision of where
to run the statement will be based on the beginning of the statement
string. For example, if using `mysqli_multi_query' to execute the
multi-statement `SELECT id FROM test ; INSERT INTO test(id) VALUES
(1)', the statement will be redirected to a slave server because it
begins with `SELECT'. The `INSERT' statement, which is also part of the
multi-statement, will not be redirected to a master server.

*Note*:

Applications must be aware of the consequences of connection switches
that are performed for load balancing purposes. Please check the
documentation on *Note connection pooling and switching:
apis-php-mysqlnd-ms.pooling, *Note transaction handling:
apis-php-mysqlnd-ms.transaction, *Note failover:
apis-php-mysqlnd-ms.failover.  *Note load balancing:
apis-php-mysqlnd-ms.loadbalancing. and *Note read-write splitting:
apis-php-mysqlnd-ms.rwsplit.


File: manual.info,  Node: apis-php-mysqlnd-ms.name,  Next: apis-php-mysqlnd-ms.quickstart,  Prev: apis-php-mysqlnd-ms.limitations,  Up: apis-php-book.mysqlnd-ms

22.9.2.3 On the name
....................

Copyright 1997-2012 the PHP Documentation Group.

The shortcut `mysqlnd_ms' stands for `mysqlnd master slave plugin'. The
name was chosen for a quick-and-dirty proof-of-concept. In the beginning
the developers did not expect to continue using the code base.


File: manual.info,  Node: apis-php-mysqlnd-ms.quickstart,  Next: apis-php-mysqlnd-ms.concepts,  Prev: apis-php-mysqlnd-ms.name,  Up: apis-php-book.mysqlnd-ms

22.9.2.4 Quickstart and Examples
................................

* Menu:

* apis-php-mysqlnd-ms.quickstart.configuration::  Setup
* apis-php-mysqlnd-ms.quickstart.usage::  Running statements
* apis-php-mysqlnd-ms.quickstart.connectionpooling::  Connection state
* apis-php-mysqlnd-ms.quickstart.sqlhints::  SQL Hints
* apis-php-mysqlnd-ms.quickstart.transactions::  Transactions
* apis-php-mysqlnd-ms.quickstart.qos-consistency::  Service level and consistency
* apis-php-mysqlnd-ms.quickstart.gtid::  Global transaction IDs
* apis-php-mysqlnd-ms.quickstart.cache::  Cache integration
* apis-php-mysqlnd-ms.quickstart.failover::  Failover
* apis-php-mysqlnd-ms.quickstart.partitioning::  Partitioning and Sharding

Copyright 1997-2012 the PHP Documentation Group.

The mysqlnd replication load balancing plugin is easy to use. This
quickstart will demo typical use-cases, and provide practical advice on
getting started.

It is strongly recommended to read the reference sections in addition
to the quickstart. The quickstart tries to avoid discussing theoretical
concepts and limitations. Instead, it will link to the reference
sections. It is safe to begin with the quickstart. However, before
using the plugin in mission critical environments we urge you to read
additionally the background information from the reference sections.

The focus is on using PECL mysqlnd_ms for work with an asynchronous
MySQL cluster, namely MySQL replication. Generally speaking an
asynchronous cluster is more difficult to use than a synchronous one.
Thus, users of, for example, MySQL Cluster will find more information
than needed.


File: manual.info,  Node: apis-php-mysqlnd-ms.quickstart.configuration,  Next: apis-php-mysqlnd-ms.quickstart.usage,  Prev: apis-php-mysqlnd-ms.quickstart,  Up: apis-php-mysqlnd-ms.quickstart

22.9.2.5 Setup
..............

Copyright 1997-2012 the PHP Documentation Group.

The plugin is implemented as a PHP extension. See also the *Note
installation instructions: apis-php-mysqlnd-ms.installation. to install
the PECL/mysqlnd_ms (http://pecl.php.net/package/mysqlnd_ms) extension.

Compile or configure the PHP MySQL extension (API) (mysqli, See section
"apis-php-ref.pdo-mysql" in the online manual, mysql) that you plan to
use with support for the See section "apis-php-mysqli" in the online
manual library.  PECL/mysqlnd_ms is a plugin for the mysqlnd library.
To use the plugin with any of the PHP MySQL extensions, the extension
has to use the mysqlnd library.

Then, load the extension into PHP and activate the plugin in the PHP
configuration file using the PHP configuration directive named
mysqlnd_ms.enable.


     mysqlnd_ms.enable=1
     mysqlnd_ms.config_file=/path/to/mysqlnd_ms_plugin.ini

The plugin uses its own configuration file. Use the PHP configuration
directive mysqlnd_ms.config_file to set the full file path to the
plugin-specific configuration file. This file must be readable by PHP
(e.g., the web server user). Please note, the configuration directive
mysqlnd_ms.config_file superseeds mysqlnd_ms.ini_file since 1.4.0. It
is a common pitfall to use the old, no longer available configuration
directive.

Create a plugin-specific configuration file. Save the file to the path
set by the PHP configuration directive mysqlnd_ms.config_file.

The plugins *Note configuration file:
apis-php-mysqlnd-ms.plugin-ini-json. is JSON based. It is divided into
one or more sections. Each section has a name, for example, `myapp'.
Every section makes its own set of configuration settings.

A section must, at a minimum, list the MySQL replication master server,
and set a list of slaves. The plugin supports using only one master
server per section. Multi-master MySQL replication setups are not yet
fully supported. Use the configuration setting master to set the
hostname, and the port or socket of the MySQL master server. MySQL
slave servers are configured using the slave keyword.


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost"
                 }
             },
             "slave": [

             ]
         }
     }

Configuring a MySQL slave server list is required, although it may
contain an empty list. It is recommended to always configure at least
one slave server.

Server lists can use

anonymous or non-anonymous syntax. Non-anonymous lists include alias
names for the servers, such as `master_0' for the master in the above
example.  The quickstart uses the more verbose non-anonymous syntax.


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "192.168.2.27",
                     "port": "3306"
                 }
             }
         }
     }

If there are at least two servers in total, the plugin can start to
load balance and switch connections. Switching connections is not
always transparent and can cause issues in certain cases.  The
reference sections about *Note connection pooling and switching:
apis-php-mysqlnd-ms.pooling, *Note transaction handling:
apis-php-mysqlnd-ms.transaction, *Note fail over:
apis-php-mysqlnd-ms.failover.  *Note load balancing:
apis-php-mysqlnd-ms.loadbalancing. and *Note read-write splitting:
apis-php-mysqlnd-ms.rwsplit. all provide more details. And potential
pitfalls are described later in this guide.

It is the responsibility of the application to handle potential issues
caused by connection switches, by configuring a master with at least
one slave server, which allows switching to work therefore related
problems can be found.

The MySQL master and MySQL slave servers, which you configure, do not
need to be part of MySQL replication setup. For testing purpose you can
use single MySQL server and make it known to the plugin as a master and
slave server as shown below. This could help you to detect many
potential issues with connection switches. However, such a setup will
not be prone to the issues caused by replication lag.


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "127.0.0.1",
                     "port": "3306"
                 }
             }
         }
     }

The plugin attempts to notify you of invalid configurations.  Since
1.5.0 it will throw a warning during PHP startup if the configuration
file cannot be read, is empty or parsing the JSON failed. Depending on
your PHP settings those errors may appear in some log files only.
Further validation is done when a connection is to be established and
the configuration file is searched for valid sections. Setting
mysqlnd_ms.force_config_usage may help debugging a faulty setup.
Please, see also configuration file debugging notes.


File: manual.info,  Node: apis-php-mysqlnd-ms.quickstart.usage,  Next: apis-php-mysqlnd-ms.quickstart.connectionpooling,  Prev: apis-php-mysqlnd-ms.quickstart.configuration,  Up: apis-php-mysqlnd-ms.quickstart

22.9.2.6 Running statements
...........................

Copyright 1997-2012 the PHP Documentation Group.

The plugin can be used with any PHP MySQL extension (mysqli, mysql, and
See section "apis-php-ref.pdo-mysql" in the online manual) that is
compiled to use the See section "apis-php-mysqli" in the online manual
library.  PECL/mysqlnd_ms plugs into the See section "apis-php-mysqli"
in the online manual library. It does not change the API or behavior of
those extensions.

Whenever a connection to MySQL is being opened, the plugin compares the
host parameter value of the connect call, with the section names from
the plugin specific configuration file. If, for example, the plugin
specific configuration file has a section `myapp' then the section
should be referenced by opening a MySQL connection to the host `myapp'


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "192.168.2.27",
                     "port": "3306"
                 }
             }
         }
     }


     <?php
     /* Load balanced following "myapp" section rules from the plugins config file */
     $mysqli = new mysqli("myapp", "username", "password", "database");
     $pdo = new PDO('mysql:host=myapp;dbname=database', 'username', 'password');
     $mysql = mysql_connect("myapp", "username", "password");
     ?>

The connection examples above will be load balanced. The plugin will
send read-only statements to the MySQL slave server with the IP
`192.168.2.27' and will listen on port `3306' for the MySQL client
connection. All other statements will be directed to the MySQL master
server running on the host `localhost'. If on Unix like operating
systems, the master on `localhost' will be accepting MySQL client
connections on the Unix domain socket `/tmp/mysql.sock', while TCP/IP
is the default port on Windows. The plugin will use the user name
`username' and the password `password' to connect to any of the MySQL
servers listed in the section `myapp' of the plugins configuration
file. Upon connect, the plugin will select `database' as the current
schemata.

The username, password and schema name are taken from the connect API
calls and used for all servers. In other words: you must use the same
username and password for every MySQL server listed in a plugin
configuration file section. The is not a general limitation. As of
PECL/mysqlnd_ms 1.1.0, it is possible to set the username and password
for any server in the plugins configuration file, to be used instead of
the credentials passed to the API call.

The plugin does not change the API for running statements.  *Note
Read-write splitting: apis-php-mysqlnd-ms.rwsplit. works out of the
box. The following example assumes that there is no significant
replication lag between the master and the slave.


     <?php
     /* Load balanced following "myapp" section rules from the plugins config file */
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (mysqli_connect_errno())
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     /* Statements will be run on the master */
     if (!$mysqli->query("DROP TABLE IF EXISTS test")) {
      printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     }
     if (!$mysqli->query("CREATE TABLE test(id INT)")) {
      printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     }
     if (!$mysqli->query("INSERT INTO test(id) VALUES (1)")) {
      printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     }

     /* read-only: statement will be run on a slave */
     if (!($res = $mysqli->query("SELECT id FROM test")) {
      printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     } else {
      $row = $res->fetch_assoc();
      $res->close();
      printf("Slave returns id = '%s'\n", $row['id'];
     }
     $mysqli->close();
     ?>

The above example will output something similar to:


     Slave returns id = '1'


File: manual.info,  Node: apis-php-mysqlnd-ms.quickstart.connectionpooling,  Next: apis-php-mysqlnd-ms.quickstart.sqlhints,  Prev: apis-php-mysqlnd-ms.quickstart.usage,  Up: apis-php-mysqlnd-ms.quickstart

22.9.2.7 Connection state
.........................

Copyright 1997-2012 the PHP Documentation Group.

The plugin changes the semantics of a PHP MySQL connection handle. A
new connection handle represents a connection pool, instead of a single
MySQL client-server network connection. The connection pool consists of
a master connection, and optionally any number of slave connections.

Every connection from the connection pool has its own state. For
example, SQL user variables, temporary tables and transactions are part
of the state. For a complete list of items that belong to the state of
a connection, see the *Note connection pooling and switching:
apis-php-mysqlnd-ms.pooling. concepts documentation. If the plugin
decides to switch connections for load balancing, the application could
be given a connection which has a different state. Applications must be
made aware of this.


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "192.168.2.27",
                     "port": "3306"
                 }
             }
         }
     }


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (!$mysqli)
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     /* Connection 1, connection bound SQL user variable, no SELECT thus run on master */
     if (!$mysqli->query("SET @myrole='master'")) {
      printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     }

     /* Connection 2, run on slave because SELECT */
     if (!($res = $mysqli->query("SELECT @myrole AS _role"))) {
      printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     } else {
      $row = $res->fetch_assoc();
      $res->close();
      printf("@myrole = '%s'\n", $row['_role']);
     }
     $mysqli->close();
     ?>

The above example will output:


     @myrole = ''

The example opens a load balanced connection and executes two
statements. The first statement `SET @myrole='master'' does not begin
with the string `SELECT'. Therefore the plugin does not recognize it as
a read-only query which shall be run on a slave.  The plugin runs the
statement on the connection to the master.  The statement sets a SQL
user variable which is bound to the master connection. The state of the
master connection has been changed.

The next statement is `SELECT @myrole AS _role'. The plugin does
recognize it as a read-only query and sends it to the slave. The
statement is run on a connection to the slave. This second connection
does not have any SQL user variables bound to it. It has a different
state than the first connection to the master. The requested SQL user
variable is not set. The example script prints `@myrole = '''.

It is the responsibility of the application developer to take care of
the connection state. The plugin does not monitor all connection state
changing activities. Monitoring all possible cases would be a very CPU
intensive task, if it could be done at all.

The pitfalls can easily be worked around using SQL hints.


File: manual.info,  Node: apis-php-mysqlnd-ms.quickstart.sqlhints,  Next: apis-php-mysqlnd-ms.quickstart.transactions,  Prev: apis-php-mysqlnd-ms.quickstart.connectionpooling,  Up: apis-php-mysqlnd-ms.quickstart

22.9.2.8 SQL Hints
..................

Copyright 1997-2012 the PHP Documentation Group.

SQL hints can force a query to choose a specific server from the
connection pool. It gives the plugin a hint to use a designated server,
which can solve issues caused by connection switches and connection
state.

SQL hints are standard compliant SQL comments. Because SQL comments are
supposed to be ignored by SQL processing systems, they do not interfere
with other programs such as the MySQL Server, the MySQL Proxy, or a
firewall.

Three SQL hints are supported by the plugin: The

MYSQLND_MS_MASTER_SWITCH

hint makes the plugin run a statement on the master,

MYSQLND_MS_SLAVE_SWITCH

enforces the use of the slave, and

MYSQLND_MS_LAST_USED_SWITCH

will run a statement on the same server that was used for the previous
statement.

The plugin scans the beginning of a statement for the existence of an
SQL hint. SQL hints are only recognized if they appear at the beginning
of the statement.


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "192.168.2.27",
                     "port": "3306"
                 }
             }
         }
     }


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (mysqli_connect_errno())
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     /* Connection 1, connection bound SQL user variable, no SELECT thus run on master */
     if (!$mysqli->query("SET @myrole='master'")) {
      printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     }

     /* Connection 1, run on master because of SQL hint */
     if (!($res = $mysqli->query(sprintf("/*%s*/SELECT @myrole AS _role", MYSQLND_MS_LAST_USED_SWITCH)))) {
      printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     } else {
      $row = $res->fetch_assoc();
      $res->close();
      printf("@myrole = '%s'\n", $row['_role']);
     }
     $mysqli->close();
     ?>

The above example will output:


     @myrole = 'master'

In the above example, using

MYSQLND_MS_LAST_USED_SWITCH

prevents session switching from the master to a slave when running the
`SELECT' statement.

SQL hints can also be used to run `SELECT' statements on the MySQL
master server. This may be desired if the MySQL slave servers are
typically behind the master, but you need current data from the cluster.

In version 1.2.0 the concept of a service level has been introduced to
address cases when current data is required. Using a service level
requires less attention and removes the need of using SQL hints for
this use case. Please, find more information below in the service level
and consistency section.


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (!$mysqli)
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     /* Force use of master, master has always fresh and current data */
     if (!$mysqli->query(sprintf("/*%s*/SELECT critical_data FROM important_table", MYSQLND_MS_MASTER_SWITCH))) {
      printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     }
     ?>

A use case may include the creation of tables on a slave. If an SQL
hint is not given, then the plugin will send `CREATE' and `INSERT'
statements to the master. Use the SQL hint

MYSQLND_MS_SLAVE_SWITCH

if you want to run any such statement on a slave, for example, to build
temporary reporting tables.


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (!$mysqli)
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     /* Force use of slave */
     if (!$mysqli->query(sprintf("/*%s*/CREATE TABLE slave_reporting(id INT)", MYSQLND_MS_SLAVE_SWITCH))) {
      printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     }
     /* Continue using this particular slave connection */
     if (!$mysqli->query(sprintf("/*%s*/INSERT INTO slave_reporting(id) VALUES (1), (2), (3)", MYSQLND_MS_LAST_USED_SWITCH))) {
      printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     }
     /* Don't use MYSQLND_MS_SLAVE_SWITCH which would allow switching to another slave! */
     if ($res = $mysqli->query(sprintf("/*%s*/SELECT COUNT(*) AS _num FROM slave_reporting", MYSQLND_MS_LAST_USED_SWITCH))) {
       $row = $res->fetch_assoc();
       $res->close();
       printf("There are %d rows in the table 'slave_reporting'", $row['_num']);
     } else {
       printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     }
     $mysqli->close();
     ?>

The SQL hint

MYSQLND_MS_LAST_USED

forbids switching a connection, and forces use of the previously used
connection.


File: manual.info,  Node: apis-php-mysqlnd-ms.quickstart.transactions,  Next: apis-php-mysqlnd-ms.quickstart.qos-consistency,  Prev: apis-php-mysqlnd-ms.quickstart.sqlhints,  Up: apis-php-mysqlnd-ms.quickstart

22.9.2.9 Transactions
.....................

Copyright 1997-2012 the PHP Documentation Group.

The current version of the plugin is not transaction safe by default,
because it is not aware of running transactions in all cases. SQL
transactions are units of work to be run on a single server. The plugin
does not always know when the unit of work starts and when it ends.
Therefore, the plugin may decide to switch connections in the middle of
a transaction.

No kind of MySQL load balancer can detect transaction boundaries
without any kind of hint from the application.

You can either use SQL hints to work around this limitation.
Alternatively, you can activate transaction API call monitoring.  In
the latter case you must use API calls only to control transactions,
see below.


     [myapp]
     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "192.168.2.27",
                     "port": "3306"
                 }
             }
         }
     }


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (!$mysqli)
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     /* Not a SELECT, will use master */
     if (!$mysqli->query("START TRANSACTION")) {
      /* Please use better error handling in your code */
      die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     }

     /* Prevent connection switch! */
     if (!$mysqli->query(sprintf("/*%s*/INSERT INTO test(id) VALUES (1)", MYSQLND_MS_LAST_USED_SWITCH)))) {
      /* Please do proper ROLLBACK in your code, don't just die */
      die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     }
     if ($res = $mysqli->query(sprintf("/*%s*/SELECT COUNT(*) AS _num FROM test", MYSQLND_MS_LAST_USED_SWITCH)))) {
       $row = $res->fetch_assoc();
       $res->close();
       if ($row['_num'] > 1000) {
        if (!$mysqli->query(sprintf("/*%s*/INSERT INTO events(task) VALUES ('cleanup')", MYSQLND_MS_LAST_USED_SWITCH)))) {
          die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
        }
       }
     } else {
      die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     }
     if (!$mysqli->query(sprintf("/*%s*/UPDATE log SET last_update = NOW()", MYSQLND_MS_LAST_USED_SWITCH)))) {
      die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     }
     if (!$mysqli->query(sprintf("/*%s*/COMMIT", MYSQLND_MS_LAST_USED_SWITCH)))) {
      die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     }

     $mysqli->close();
     ?>

Starting with PHP 5.4.0, the `mysqlnd' library allows the plugin to
monitor the status of the `autocommit' mode, if the mode is set by API
calls instead of using SQL statements such as `SET AUTOCOMMIT=0'. This
makes it possible for the plugin to become transaction aware. In this
case, you do not need to use SQL hints.

If using PHP 5.4.0 or newer, API calls that enable `autocommit' mode,
and when setting the plugin configuration option trx_stickiness=master,
the plugin can automatically disable load balancing and connection
switches for SQL transactions. In this configuration, the plugin stops
load balancing if `autocommit' is disabled and directs all statements
to the master. This prevents connection switches in the middle of a
transaction.  Once `autocommit' is re-enabled, the plugin starts to
load balance statements again.

API based transaction boundary detection has been improved with PHP
5.5.0 and PECL/mysqlnd_ms 1.5.0 to cover not only calls to
`mysqli_autocommit' but also `mysqli_begin'
(http://www.php.net/mysqli_begin), `mysqli_commit' and
`mysqli_rollback'.


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "127.0.0.1",
                     "port": "3306"
                 }
             },
             "trx_stickiness": "master"
         }
     }


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (!$mysqli)
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     /* Disable autocommit, plugin will run all statements on the master */
     $mysqli->autocommit(FALSE);

     if (!$mysqli->query("INSERT INTO test(id) VALUES (1)")) {
      /* Please do proper ROLLBACK in your code, don't just die */
      die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     }
     if ($res = $mysqli->query("SELECT COUNT(*) AS _num FROM test")) {
       $row = $res->fetch_assoc();
       $res->close();
       if ($row['_num'] > 1000) {
        if (!$mysqli->query("INSERT INTO events(task) VALUES ('cleanup')")) {
          die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
        }
       }
     } else {
      die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     }
     if (!$mysqli->query("UPDATE log SET last_update = NOW()")) {
      die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     }
     if (!$mysqli->commit()) {
      die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     }

     /* Plugin assumes that the transaction has ended and starts load balancing again */
     $mysqli->autocommit(TRUE);
     $mysqli->close();
     ?>

*Version requirement*:

The plugin configuration option trx_stickiness=master requires PHP
5.4.0 or newer.

Please note the restrictions outlined in the *Note transaction
handling: apis-php-mysqlnd-ms.transaction. concepts section.


File: manual.info,  Node: apis-php-mysqlnd-ms.quickstart.qos-consistency,  Next: apis-php-mysqlnd-ms.quickstart.gtid,  Prev: apis-php-mysqlnd-ms.quickstart.transactions,  Up: apis-php-mysqlnd-ms.quickstart

22.9.2.10 Service level and consistency
.......................................

Copyright 1997-2012 the PHP Documentation Group.

*Version requirement*:

Service levels have been introduced in PECL mysqlnd_ms version
1.2.0-alpha.  *Note `mysqlnd_ms_set_qos':
apis-php-function.mysqlnd-ms-set-qos.  is available with PHP 5.4.0 or
newer.

Different types of MySQL cluster solutions offer different service and
data consistency levels to their users. An asynchronous MySQL
replication cluster offers eventual consistency by default. A read
executed on an asynchronous slave may return current, stale or no data
at all, depending on whether the slave has replayed all changesets from
the master or not.

Applications using an MySQL replication cluster need to be designed to
work correctly with eventual consistent data. In some cases, however,
stale data is not acceptable. In those cases only certain slaves or
even only master accesses are allowed to achieve the required quality
of service from the cluster.

As of PECL mysqlnd_ms 1.2.0 the plugin is capable of selecting MySQL
replication nodes automatically that deliver session consistency or
strong consistency. Session consistency means that one client can read
its writes. Other clients may or may not see the clients' write. Strong
consistency means that all clients will see all writes from the client.


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "127.0.0.1",
                     "port": "3306"
                 }
             }
         }
     }


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (!$mysqli)
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     /* read-write splitting: master used */
     if (!$mysqli->query("INSERT INTO orders(order_id, item) VALUES (1, 'christmas tree, 1.8m')")) {
        /* Please use better error handling in your code */
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     }

     /* Request session consistency: read your writes */
     if (!mysqlnd_ms_set_qos($mysqli, MYSQLND_MS_QOS_CONSISTENCY_SESSION))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     /* Plugin picks a node which has the changes, here: master */
     if (!$res = $mysqli->query("SELECT item FROM orders WHERE order_id = 1"))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     var_dump($res->fetch_assoc());

     /* Back to eventual consistency: stale data allowed */
     if (!mysqlnd_ms_set_qos($mysqli, MYSQLND_MS_QOS_CONSISTENCY_EVENTUAL))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     /* Plugin picks any slave, stale data is allowed */
     if (!$res = $mysqli->query("SELECT item, price FROM specials"))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     ?>

Service levels can be set in the plugins configuration file and at
runtime using *Note `mysqlnd_ms_set_qos':
apis-php-function.mysqlnd-ms-set-qos.  In the example the function is
used to enforce session consistency (read your writes) for all future
statements until further notice. The `SELECT' statement on the `orders'
table is run on the master to ensure the previous write can be seen by
the client. Read-write splitting logic has been adapted to fulfill the
service level.

After the application has read its changes from the `orders' table it
returns to the default service level, which is eventual consistency.
Eventual consistency puts no restrictions on choosing a node for
statement execution. Thus, the `SELECT' statement on the `specials'
table is executed on a slave.

The new functionality supersedes the use of SQL hints and the
`master_on_write' configuration option. In many cases *Note
`mysqlnd_ms_set_qos': apis-php-function.mysqlnd-ms-set-qos.  is easier
to use, more powerful improves portability.


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "127.0.0.1",
                     "port": "3306"
                 }
             },
             "failover" : "master"
         }
     }


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (!$mysqli)
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     /* Read from slaves lagging no more than four seconds */
     $ret = mysqlnd_ms_set_qos($mysqli,
              MYSQLND_MS_QOS_CONSISTENCY_EVENTUAL,
              MYSQLND_MS_QOS_OPTION_AGE, 4);

     if (!$ret)
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     /* Plugin picks any slave, which may or may not have the changes */
     if (!$res = $mysqli->query("SELECT item, price FROM daytrade"))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     /* Back to default: use of all slaves and masters permitted */
     if (!mysqlnd_ms_set_qos($mysqli, MYSQLND_MS_QOS_CONSISTENCY_EVENTUAL))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     ?>

The eventual consistency service level can be used with an optional
parameter to set a maximum slave lag for choosing slaves. If set, the
plugin checks `SHOW SLAVE STATUS' for all configured slaves. In case of
the example, only slaves for which `Slave_IO_Running=Yes',
`Slave_SQL_Running=Yes' and `Seconds_Behind_Master <= 4' is true are
considered for executing the statement `SELECT item, price FROM
daytrade'.

Checking `SHOW SLAVE STATUS' is done transparently from an applications
perspective. Errors, if any, are reported as warnings. No error will be
set on the connection handle. Even if all `SHOW SLAVE STATUS' SQL
statements executed by the plugin fail, the execution of the users
statement is not stopped, given that master fail over is enabled. Thus,
no application changes are required.

*Expensive and slow operation*:

Checking `SHOW SLAVE STATUS' for all slaves adds overhead to the
application. It is an expensive and slow background operation. Try to
minimize the use of it.  Unfortunately, a MySQL replication cluster
does not give clients the possibility to request a list of candidates
from a central instance. Thus, a more efficient way of checking the
slaves lag is not available.

Please, note the limitations and properties of `SHOW SLAVE STATUS' as
explained in the MySQL reference manual.

To prevent mysqlnd_ms from emitting a warning if no slaves can be found
that lag no more than the defined number of seconds behind the master,
it is necessary to enable master fail over in the plugins configuration
file. If no slaves can be found and fail over is turned on, the plugin
picks a master for executing the statement.

If no slave can be found and fail over is turned off, the plugin emits
a warning, it does not execute the statement and it sets an error on
the connection.


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "127.0.0.1",
                     "port": "3306"
                 }
             }
         }
     }


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (!$mysqli)
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     /* Read from slaves lagging no more than four seconds */
     $ret = mysqlnd_ms_set_qos($mysqli,
              MYSQLND_MS_QOS_CONSISTENCY_EVENTUAL,
              MYSQLND_MS_QOS_OPTION_AGE, 4);

     if (!$ret)
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     /* Plugin picks any slave, which may or may not have the changes */
     if (!$res = $mysqli->query("SELECT item, price FROM daytrade"))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     /* Back to default: use of all slaves and masters permitted */
     if (!mysqlnd_ms_set_qos($mysqli, MYSQLND_MS_QOS_CONSISTENCY_EVENTUAL))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     ?>

The above example will output:


     PHP Warning:  mysqli::query(): (mysqlnd_ms) Couldn't find the appropriate slave connection. 0 slaves to choose from. Something is wrong in %s on line %d
     PHP Warning:  mysqli::query(): (mysqlnd_ms) No connection selected by the last filter in %s on line %d
     [2000] (mysqlnd_ms) No connection selected by the last filter


File: manual.info,  Node: apis-php-mysqlnd-ms.quickstart.gtid,  Next: apis-php-mysqlnd-ms.quickstart.cache,  Prev: apis-php-mysqlnd-ms.quickstart.qos-consistency,  Up: apis-php-mysqlnd-ms.quickstart

22.9.2.11 Global transaction IDs
................................

Copyright 1997-2012 the PHP Documentation Group.

*Version requirement*:

A client-side global transaction ID injection has been introduced in
mysqlnd_ms version 1.2.0-alpha. The feature is not required for
synchronous clusters, such as MySQL Cluster.  Use it with asynchronous
clusters such as classical MySQL replication.

As of MySQL 5.6.5-m8 the MySQL server features built-in global
transaction identifiers. The MySQL built-in global transaction ID
feature is supported by PECL/mysqlnd_ms 1.3.0-alpha or later.

PECL/mysqlnd_ms can either use its own global transaction ID emulation
or the global transaction ID feature built-in to MySQL 5.6.5-m8 or
later. From a developer perspective the client-side and server-side
approach offer the same features with regards to service levels
provided by PECL/mysqlnd_ms. Their differences are discussed in the
*Note concepts section: apis-php-mysqlnd-ms.gtid.

The quickstart first demonstrates the use of the client-side global
transaction ID emulation built-in to PECL/mysqlnd_ms before its show
how to use the server-side counterpart. The order ensures that the
underlying idea is discussed first.

_Idea and client-side emulation_

In its most basic form a global transaction ID (GTID) is a counter in a
table on the master. The counter is incremented whenever a transaction
is committed on the master. Slaves replicate the table. The counter
serves two purposes. In case of a master failure, it helps the database
administrator to identify the most recent slave for promoting it to the
new master. The most recent slave is the one with the highest counter
value. Applications can use the global transaction ID to search for
slaves which have replicated a certain write (identified by a global
transaction ID) already.

PECL/mysqlnd_ms can inject SQL for every committed transaction to
increment a GTID counter. The so created GTID is accessible by the
application to identify an applications write operation.  This enables
the plugin to deliver session consistency (read your writes) service
level by not only querying masters but also slaves which have
replicated the change already. Read load is taken away from the master.

Client-side global transaction ID emulation has some limitations.
Please, read the *Note concepts section: apis-php-mysqlnd-ms.gtid.
carefully to fully understand the principles and ideas behind it,
before using in production environments. The background knowledge is
not required to continue with the quickstart.

First, create a counter table on your master server and insert a record
into it. The plugin does not assist creating the table.  Database
administrators must make sure it exists. Depending on the error
reporting mode, the plugin will silently ignore the lack of the table
or bail out.


     CREATE TABLE `trx` (
       `trx_id` int(11) DEFAULT NULL,
       `last_update` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP
     ) ENGINE=InnoDB DEFAULT CHARSET=latin1
     INSERT INTO `trx`(`trx_id`) VALUES (1);

In the plugins configuration file set the SQL to update the global
transaction ID table using `on_commit' from the
`global_transaction_id_injection' section. Make sure the table name
used for the `UPDATE' statement is fully qualified. In the example,
`test.trx' is used to refer to table `trx' in the schema (database)
`test'. Use the table that was created in the previous step. It is
important to set the fully qualified table name because the connection
on which the injection is done may use a different default database.
Make sure the user that opens the connection is allowed to execute the
`UPDATE'.

Enable reporting of errors that may occur when mysqlnd_ms does global
transaction ID injection.


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "127.0.0.1",
                     "port": "3306"
                 }
             },
             "global_transaction_id_injection":{
                 "on_commit":"UPDATE test.trx SET trx_id = trx_id + 1",
                 "report_error":true
             }
         }
     }


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (!$mysqli)
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     /* auto commit mode, transaction on master, GTID must be incremented */
     if (!$mysqli->query("DROP TABLE IF EXISTS test"))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     /* auto commit mode, transaction on master, GTID must be incremented */
     if (!$mysqli->query("CREATE TABLE test(id INT)"))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     /* auto commit mode, transaction on master, GTID must be incremented */
     if (!$mysqli->query("INSERT INTO test(id) VALUES (1)"))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     /* auto commit mode, read on slave, no increment */
     if (!($res = $mysqli->query("SELECT id FROM test")))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     var_dump($res->fetch_assoc());
     ?>

The above example will output:


     array(1) {
       ["id"]=>
       string(1) "1"
     }

The example runs three statements in auto commit mode on the master,
causing three transactions on the master. For every such statement, the
plugin will inject the configured `UPDATE' transparently before
executing the users SQL statement. When the script ends the global
transaction ID counter on the master has been incremented by three.

The fourth SQL statement executed in the example, a `SELECT', does not
trigger an increment. Only transactions (writes) executed on a master
shall increment the GTID counter.

*SQL for global transaction ID: efficient solution wanted!*:

The SQL used for the client-side global transaction ID emulation is
inefficient. It is optimized for clearity not for performance. Do not
use it for production environments.  Please, help finding an efficient
solution for inclusion in the manual. We appreciate your input.


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "127.0.0.1",
                     "port": "3306"
                 }
             },
             "global_transaction_id_injection":{
                 "on_commit":"UPDATE test.trx SET trx_id = trx_id + 1",
                 "fetch_last_gtid" : "SELECT MAX(trx_id) FROM test.trx",
                 "report_error":true
             }
         }
     }


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (!$mysqli)
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     /* auto commit mode, transaction on master, GTID must be incremented */
     if (!$mysqli->query("DROP TABLE IF EXISTS test"))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     printf("GTID after transaction %s\n", mysqlnd_ms_get_last_gtid($mysqli));

     /* auto commit mode, transaction on master, GTID must be incremented */
     if (!$mysqli->query("CREATE TABLE test(id INT)"))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     printf("GTID after transaction %s\n", mysqlnd_ms_get_last_gtid($mysqli));
     ?>

The above example will output:


     GTID after transaction 7
     GTID after transaction 8

Applications can ask PECL mysqlnd_ms for a global transaction ID which
belongs to the last write operation performed by the application. The
function *Note `mysqlnd_ms_get_last_gtid':
apis-php-function.mysqlnd-ms-get-last-gtid.  returns the GTID obtained
when executing the SQL statement from the `fetch_last_gtid' entry of the
`global_transaction_id_injection' section from the plugins
configuration file. The function may be called after the GTID has been
incremented.

Applications are adviced not to run the SQL statement themselves as
this bares the risk of accidently causing an implicit GTID increment.
Also, if the function is used, it is easy to migrate an application
from one SQL statement for fetching a transaction ID to another, for
example, if any MySQL server ever features built-in global transaction
ID support.

The quickstart shows a SQL statement which will return a GTID equal or
greater to that created for the previous statement. It is exactly the
GTID created for the previous statement if no other clients have
incremented the GTID in the time span between the statement execution
and the `SELECT' to fetch the GTID. Otherwise, it is greater.


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "127.0.0.1",
                     "port": "3306"
                 }
             },
             "global_transaction_id_injection":{
                 "on_commit":"UPDATE test.trx SET trx_id = trx_id + 1",
                 "fetch_last_gtid" : "SELECT MAX(trx_id) FROM test.trx",
                 "check_for_gtid" : "SELECT trx_id FROM test.trx WHERE trx_id >= #GTID",
                 "report_error":true
             }
         }
     }


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (!$mysqli)
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     /* auto commit mode, transaction on master, GTID must be incremented */
     if (!$mysqli->query("DROP TABLE IF EXISTS test") ||
         !$mysqli->query("CREATE TABLE test(id INT)") ||
         !$mysqli->query("INSERT INTO test(id) VALUES (1)"))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     /* GTID as an identifier for the last write */
     $gtid = mysqlnd_ms_get_last_gtid($mysqli);

     /* Session consistency (read your writes): try to read from slaves not only master */
     if (false == mysqlnd_ms_set_qos($mysqli, MYSQLND_MS_QOS_CONSISTENCY_SESSION, MYSQLND_MS_QOS_OPTION_GTID, $gtid)) {
         die(sprintf("[006] [%d] %s\n", $mysqli->errno, $mysqli->error));
     }

     /* Either run on master or a slave which has replicated the INSERT */
     if (!($res = $mysqli->query("SELECT id FROM test"))) {
         die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     }

     var_dump($res->fetch_assoc());
     ?>

A GTID returned from *Note `mysqlnd_ms_get_last_gtid':
apis-php-function.mysqlnd-ms-get-last-gtid.  can be used as an option
for the session consistency service level. Session consistency delivers
read your writes. Session consistency can be requested by calling *Note
`mysqlnd_ms_set_qos': apis-php-function.mysqlnd-ms-set-qos.  In the
example, the plugin will execute the `SELECT' statement either on the
master or on a slave which has replicated the previous `INSERT' already.

PECL mysqlnd_ms will transparently check every configured slave if it
has replicated the `INSERT' by checking the slaves GTID table. The
check is done running the SQL set with the `check_for_gtid' option from
the `global_transaction_id_injection' section of the plugins
configuration file. Please note, that this is a slow and expensive
procedure. Applications should try to use it sparsely and only if read
load on the master becomes to high otherwise.

_Use of the server-side global transaction ID feature_

Starting with MySQL 5.6.5-m8 the MySQL Replication system features
server-side global transaction IDs. Transaction identifiers are
automatically generated and maintained by the server. Users do not need
to take care of maintaining them.  There is no need to setup any tables
in advance, or for setting `on_commit'. A client-side emulation is no
longer needed.

Clients can continue to use global transaction identifier to achieve
session consistency when reading from MySQL Replication slaves. The
algorithm works as described above. Different SQL statements must be
configured for `fetch_last_gtid' and `check_for_gtid'. The statements
are given below. Please note, MySQL 5.6.5-m8 is a development version.
Details of the server implementation may change in the future and
require adoption of the SQL statements shown.

Using the following configuration any of the above described
functionality can be used together with the server-side global
transaction ID feature.  *Note `mysqlnd_ms_get_last_gtid':
apis-php-function.mysqlnd-ms-get-last-gtid.  and *Note
`mysqlnd_ms_set_qos': apis-php-function.mysqlnd-ms-set-qos.  continue
to work as described above. The only difference is that the server does
not use a simple sequence number but a string containing of a server
identifier and a sequence number. Thus, users cannot easily derive an
order from GTIDs returned by *Note `mysqlnd_ms_get_last_gtid':
apis-php-function.mysqlnd-ms-get-last-gtid.


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "127.0.0.1",
                     "port": "3306"
                 }
             },
             "global_transaction_id_injection":{
                 "fetch_last_gtid" : "SELECT @@GLOBAL.GTID_DONE AS trx_id FROM DUAL",
                 "check_for_gtid" : "SELECT GTID_SUBSET('#GTID', @@GLOBAL.GTID_DONE) AS trx_id FROM DUAL",
                 "report_error":true
             }
         }
     }


File: manual.info,  Node: apis-php-mysqlnd-ms.quickstart.cache,  Next: apis-php-mysqlnd-ms.quickstart.failover,  Prev: apis-php-mysqlnd-ms.quickstart.gtid,  Up: apis-php-mysqlnd-ms.quickstart

22.9.2.12 Cache integration
...........................

Copyright 1997-2012 the PHP Documentation Group.

*Version requirement, dependencies and status*:

Please, find more about version requirements, extension load order
dependencies and the current status in the *Note concepts section:
apis-php-mysqlnd-ms.concept_cache.!

Databases clusters can deliver different levels of consistency.  As of
PECL/mysqlnd_ms 1.2.0 it is possible to advice the plugin to consider
only cluster nodes that can deliver the consistency level requested.
For example, if using asynchronous MySQL Replication with its
cluster-wide eventual consistency, it is possible to request session
consistency (read your writes) at any time using `mysqlnd_ms_set_quos'
(http://www.php.net/mysqlnd_ms_set_quos).  Please, see also the *Note
service level and consistency:
apis-php-mysqlnd-ms.quickstart.qos-consistency. introduction.

     /* Request session consistency: read your writes */
     if (!mysqlnd_ms_set_qos($mysqli, MYSQLND_MS_QOS_CONSISTENCY_SESSION))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

Assuming PECL/mysqlnd has been explicitly told to deliver no
consistency level higher than eventual consistency, it is possible to
replace a database node read access with a client-side cache using
time-to-live (TTL) as its invalidation strategy. Both the database node
and the cache may or may not serve current data as this is what
eventual consistency defines.

Replacing a database node read access with a local cache access can
improve overall performance and lower the database load. If the cache
entry is every reused by other clients than the one creating the cache
entry, a database access is saved and thus database load is lowered.
Furthermore, system performance can become better if computation and
delivery of a database query is slower than a local cache access.


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "127.0.0.1",
                     "port": "3306"
                 }
             },
         }
     }


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (!$mysqli)
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     if (!$mysqli->query("DROP TABLE IF EXISTS test") ||
         !$mysqli->query("CREATE TABLE test(id INT)") ||
         !$mysqli->query("INSERT INTO test(id) VALUES (1)"))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     /* Explicitly allow eventual consistency and caching (TTL <= 60 seconds) */
     if (false == mysqlnd_ms_set_qos($mysqli, MYSQLND_MS_QOS_CONSISTENCY_EVENTUAL, MYSQLND_MS_QOS_OPTION_CACHE, 60)) {
         die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     }

     /* To make this example work, we must wait for a slave to catch up. Brute force style. */
     $attempts = 0;
     do {
       /* check if slave has the table */
       if ($res = $mysqli->query("SELECT id FROM test")) {
         break;
       } else if ($mysqli->errno) {
         die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
       }
       /* wait for slave to catch up */
       usleep(200000);
     } while ($attempts++ < 10);

     /* Query has been run on a slave, result is in the cache */
     assert($res);
     var_dump($res->fetch_assoc());

     /* Served from cache */
     $res = $mysqli->query("SELECT id FROM test");
     ?>

The example shows how to use the cache feature. First, you have to set
the quality of service to eventual consistency and explicitly allow for
caching. This is done by calling *Note `mysqlnd_ms_set_qos':
apis-php-function.mysqlnd-ms-set-qos.  Then, the result set of every
read-only statement is cached for upto that many seconds as allowed with
*Note `mysqlnd_ms_set_qos': apis-php-function.mysqlnd-ms-set-qos.

The actual TTL is lower or equal to the value set with *Note
`mysqlnd_ms_set_qos': apis-php-function.mysqlnd-ms-set-qos.  The value
passed to the function sets the maximum age (seconds) of the data
delivered. To calculate the actual TTL value the replication lag on a
slave is checked and subtracted from the given value. If, for example,
the maximum age is set to 60 seconds and the slave reports a lag of 10
seconds the resulting TTL is 50 seconds. The TTL is calculated
individually for every cached query.


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (!$mysqli)
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     if (!$mysqli->query("DROP TABLE IF EXISTS test") ||
         !$mysqli->query("CREATE TABLE test(id INT)") ||
         !$mysqli->query("INSERT INTO test(id) VALUES (1)"))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     /* Explicitly allow eventual consistency and caching (TTL <= 60 seconds) */
     if (false == mysqlnd_ms_set_qos($mysqli, MYSQLND_MS_QOS_CONSISTENCY_EVENTUAL, MYSQLND_MS_QOS_OPTION_CACHE, 60)) {
         die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     }

     /* To make this example work, we must wait for a slave to catch up. Brute force style. */
     $attempts = 0;
     do {
       /* check if slave has the table */
       if ($res = $mysqli->query("SELECT id FROM test")) {
         break;
       } else if ($mysqli->errno) {
         die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
       }
       /* wait for slave to catch up */
       usleep(200000);
     } while ($attempts++ < 10);

     assert($res);

     /* Query has been run on a slave, result is in the cache */
     var_dump($res->fetch_assoc());

     /* Served from cache */
     if (!($res = $mysqli->query("SELECT id FROM test")))
      die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     var_dump($res->fetch_assoc());

     /* Update on master */
     if (!$mysqli->query("UPDATE test SET id = 2"))
      die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     /* Read your writes */
     if (false == mysqlnd_ms_set_qos($mysqli, MYSQLND_MS_QOS_CONSISTENCY_SESSION)) {
         die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     }

     /* Fetch latest data */
     if (!($res = $mysqli->query("SELECT id FROM test")))
      die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     var_dump($res->fetch_assoc());
     ?>

The quality of service can be changed at any time to avoid further
cache usage. If needed, you can switch to read your writes (session
consistency). In that case, the cache will not be used and fresh data
is read.


File: manual.info,  Node: apis-php-mysqlnd-ms.quickstart.failover,  Next: apis-php-mysqlnd-ms.quickstart.partitioning,  Prev: apis-php-mysqlnd-ms.quickstart.cache,  Up: apis-php-mysqlnd-ms.quickstart

22.9.2.13 Failover
..................

Copyright 1997-2012 the PHP Documentation Group.

By default, the plugin does not attempt to fail over if connecting to a
host fails. This prevents pitfalls related to *Note connection state:
apis-php-mysqlnd-ms.quickstart.connectionpooling. It is recommended to
manually handle connection errors in a way similar to a failed
transaction. You should catch the error, rebuild the connection state
and rerun your query as shown below.

If connection state is no issue to you, you can alternatively enable
automatic and silent failover. Depending on the configuration, the
automatic and silent failover will either attempt to fail over to the
master before issuing and error or, try to connect to other slaves,
given the query allowes for it, before attempting to connect to a
master. Because *Note automatic failover: apis-php-mysqlnd-ms.failover.
is not fool-proof, it is not discussed in the quickstart. Instead,
details are given in the concepts section below.


       {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "simulate_slave_failure",
                     "port": "0"
                 },
                 "slave_1": {
                     "host": "127.0.0.1",
                     "port": 3311
                 }
             },
            "filters": { "roundrobin": [] }
         }
      }


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (!$mysqli)
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     $sql = "SELECT 1 FROM DUAL";

     /* error handling as it should be done regardless of the plugin */
     if (!($res = $link->query($sql))) {
       /* plugin specific: check for connection error */
       switch ($link->errno) {
         case 2002:
         case 2003:
         case 2005:
           printf("Connection error - trying next slave!\n");
           /* load balancer will pick next slave */
           $res = $link->query($sql);
           break;
         default:
           /* no connection error, failover is unlikely to help */
           die(sprintf("SQL error: [%d] %s", $link->errno, $link->error));
           break;
       }
     }
     if ($res) {
       var_dump($res->fetch_assoc());
     }
     ?>


File: manual.info,  Node: apis-php-mysqlnd-ms.quickstart.partitioning,  Prev: apis-php-mysqlnd-ms.quickstart.failover,  Up: apis-php-mysqlnd-ms.quickstart

22.9.2.14 Partitioning and Sharding
...................................

Copyright 1997-2012 the PHP Documentation Group.

Database clustering is done for various reasons. Clusters can improve
availability, fault tolerance, and increase performance by applying a
divide and conquer approach as work is distributed over many machines.
Clustering is sometimes combined with partitioning and sharding to
further break up a large complex task into smaller, more manageable
units.

The mysqlnd_ms plugin aims to support a wide variety of MySQL database
clusters. Some flavors of MySQL database clusters have built-in methods
for partitioning and sharding, which could be transparent to use. The
plugin supports the two most common approaches: MySQL Replication table
filtering, and Sharding (application based partitioning).

MySQL Replication supports partitioning as filters that allow you to
create slaves that replicate all or specific databases of the master,
or tables. It is then in the responsibility of the application to
choose a slave according to the filter rules. You can either use the
mysqlnd_ms `node_groups' filter to manually support this, or use the
experimental table filter.

Manual partitioning or sharding is supported through the node grouping
filter, and SQL hints as of 1.5.0. The node_groups filter lets you
assign a symbolic name to a group of master and slave servers. In the
example, the master `master_0' and `slave_0' form a group with the name
`Partition_A'. It is entirely up to you to decide what makes up a
group. For example, you may use node groups for sharding, and use the
group names to address shards like `Shard_A_Range_0_100'.


      {
       "myapp": {
            "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "simulate_slave_failure",
                     "port": "0"
                 },
                 "slave_1": {
                     "host": "127.0.0.1",
                     "port": 3311
                 }
             },
             "filters": {
                 "node_groups": {
                     "Partition_A" : {
                         "master": ["master_0"],
                         "slave": ["slave_0"]
                     }
                 },
                "roundrobin": []
             }
         }
     }


     <?php
     function select($mysqli, $msg, $hint = '') {
       /* Note: weak test, two connections to two servers may have the same thread id */
       $sql = sprintf("SELECT CONNECTION_ID() AS _thread, '%s' AS _hint FROM DUAL", $msg);
       if ($hint) {
         $sql = $hint . $sql;
       }
       if (!($res = $mysqli->query($sql))) {
         printf("[%d] %s", $mysqli->errno, $mysqli->error);
         return false;
       }
       $row =  $res->fetch_assoc();
       printf("%d - %s - %s\n", $row['_thread'], $row['_hint'], $sql);
       return true;
     }

     $mysqli = new mysqli("myapp", "user", "password", "database");
     if (!$mysqli)
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     /* All slaves allowed */
     select($mysqli, "slave_0");
     select($mysqli, "slave_1");

     /* only servers of node group "Partition_A" allowed */
     select($mysqli, "slave_1", "/*Partition_A*/");
     select($mysqli, "slave_1", "/*Partition_A*/");
     ?>


     6804 - slave_0 - SELECT CONNECTION_ID() AS _thread, 'slave1' AS _hint FROM DUAL
     2442 - slave_1 - SELECT CONNECTION_ID() AS _thread, 'slave2' AS _hint FROM DUAL
     6804 - slave_0 - /*Partition_A*/SELECT CONNECTION_ID() AS _thread, 'slave1' AS _hint FROM DUAL
     6804 - slave_0 - /*Partition_A*/SELECT CONNECTION_ID() AS _thread, 'slave1' AS _hint FROM DUAL

By default, the plugin will use all configured master and slave servers
for query execution. But if a query begins with a SQL hint like
`/*node_group*/', the plugin will only consider the servers listed in
the `node_group' for query execution. Thus, `SELECT' queries prefixed
with `/*Partition_A*/' will only be executed on `slave_0'.


File: manual.info,  Node: apis-php-mysqlnd-ms.concepts,  Next: apis-php-mysqlnd-ms.setup,  Prev: apis-php-mysqlnd-ms.quickstart,  Up: apis-php-book.mysqlnd-ms

22.9.2.15 Concepts
..................

* Menu:

* apis-php-mysqlnd-ms.architecture::  Architecture
* apis-php-mysqlnd-ms.pooling::  Connection pooling and switching
* apis-php-mysqlnd-ms.transaction::  Transaction handling
* apis-php-mysqlnd-ms.errorhandling::  Error handling
* apis-php-mysqlnd-ms.transient_errors::  Transient errors
* apis-php-mysqlnd-ms.failover::  Failover
* apis-php-mysqlnd-ms.loadbalancing::  Load balancing
* apis-php-mysqlnd-ms.rwsplit::  Read-write splitting
* apis-php-mysqlnd-ms.filter::   Filter
* apis-php-mysqlnd-ms.qos-consistency::  Service level and consistency
* apis-php-mysqlnd-ms.gtid::     Global transaction IDs
* apis-php-mysqlnd-ms.concept_cache::  Cache integration
* apis-php-mysqlnd-ms.supportedclusters::  Supported clusters

Copyright 1997-2012 the PHP Documentation Group.

This explains the architecture and related concepts for this plugin,
and describes the impact that MySQL replication and this plugin have on
developmental tasks while using a database cluster.  Reading and
understanding these concepts is required, in order to use this plugin
with success.


File: manual.info,  Node: apis-php-mysqlnd-ms.architecture,  Next: apis-php-mysqlnd-ms.pooling,  Prev: apis-php-mysqlnd-ms.concepts,  Up: apis-php-mysqlnd-ms.concepts

22.9.2.16 Architecture
......................

Copyright 1997-2012 the PHP Documentation Group.

The mysqlnd replication and load balancing plugin is implemented as a
PHP extension. It is written in C and operates under the hood of PHP.
During the startup of the PHP interpreter, in the module init phase of
the PHP engine, it gets registered as a See section "apis-php-mysqli"
in the online manual plugin to replace selected mysqlnd C methods.

At PHP runtime, it inspects queries sent from mysqlnd (PHP) to the
MySQL server. If a query is recognized as read-only, it will be sent to
one of the configured slave servers. Statements are considered
read-only if they either start with `SELECT', the SQL hint
`/*ms=slave*/' or a slave had been chosen for running the previous
query, and the query started with the SQL hint `/*ms=last_used*/'. In
all other cases, the query will be sent to the MySQL replication master
server.

For better portability, applications should use the

MYSQLND_MS_MASTER_SWITCH

,

MYSQLND_MS_SLAVE_SWITCH

, and

MYSQLND_MS_LAST_USED_SWITCH

*Note predefined mysqlnd_ms constants: apis-php-mysqlnd-ms.constants,
instead of their literal values, such as `/*ms=slave*/'.

The plugin handles the opening and closing of database connections to
both master and slave servers. From an application point of view, there
continues to be only one connection handle. However, internally, this
one public connection handle represents a pool of network connections
that are managed by the plugin. The plugin proxies queries to the
master server, and to the slaves using multiple connections.

Database connections have a state consisting of, for example,
transaction status, transaction settings, character set settings, and
temporary tables. The plugin will try to maintain the same state among
all internal connections, whenever this can be done in an automatic and
transparent way. In cases where it is not easily possible to maintain
state among all connections, such as when using `BEGIN TRANSACTION', the
plugin leaves it to the user to handle.


File: manual.info,  Node: apis-php-mysqlnd-ms.pooling,  Next: apis-php-mysqlnd-ms.transaction,  Prev: apis-php-mysqlnd-ms.architecture,  Up: apis-php-mysqlnd-ms.concepts

22.9.2.17 Connection pooling and switching
..........................................

Copyright 1997-2012 the PHP Documentation Group.

The replication and load balancing plugin changes the semantics of a
PHP MySQL connection handle. The existing API of the PHP MySQL
extensions (mysqli, mysql, and See section "apis-php-ref.pdo-mysql" in
the online manual) are not changed in a way that functions are added or
removed. But their behaviour changes when using the plugin. Existing
applications do not need to be adapted to a new API, but they may need
to be modified because of the behaviour changes.

The plugin breaks the one-by-one relationship between a mysqli, mysql,
and See section "apis-php-ref.pdo-mysql" in the online manual connection
handle and a MySQL network connection. And a mysqli, mysql, and See
section "apis-php-ref.pdo-mysql" in the online manual connection handle
represents a local pool of connections to the configured MySQL
replication master and MySQL replication slave servers.  The plugin
redirects queries to the master and slave servers. At some point in
time one and the same PHP connection handle may point to the MySQL
master server. Later on, it may point to one of the slave servers or
still the master. Manipulating and replacing the network connection
referenced by a PHP MySQL connection handle is not a transparent
operation.

Every MySQL connection has a state. The state of the connections in the
connection pool of the plugin can differ. Whenever the plugin switches
from one wire connection to another, the current state of the user
connection may change. The applications must be aware of this.

The following list shows what the connection state consists of.  The
list may not be complete.

   * Transaction status

   * Temporary tables

   * Table locks

   * Session system variables and session user variables

   * The current database set using `USE' and other state chaining SQL
     commands

   * Prepared statements

   * `HANDLER' variables

   * Locks acquired with `GET_LOCK()'

Connection switches happen right before queries are executed.  The
plugin does not switch the current connection until the next statement
is executed.

*Replication issues*:

See also the MySQL reference manual chapter about replication features
(http://dev.mysql.com/doc/mysql/en/replication.html) and related
issues. Some restrictions may not be related to the PHP plugin, but are
properties of the MySQL replication system.

Broadcasted messages

The plugins philosophy is to align the state of connections in the pool
only if the state is under full control of the plugin, or if it is
necessary for security reasons. Just a few actions that change the
state of the connection fall into this category.

The following is a list of connection client library calls that change
state, and are broadcasted to all open connections in the connection
pool.

If any of the listed calls below are to be executed, the plugin loops
over all open master and slave connections. The loop continues until
all servers have been contacted, and the loop does not break if a
server indicates a failure. If possible, the failure will propagate to
the called user API function, which may be detected depending on which
underlying library function was triggered.

Unknown PHP API feature.

Library Notes                                              Version
call                                                       
`change_user()'Called by the `mysqli_change_user' user API call.  Since 1.0.0.
        Also triggered upon reuse of a persistent          
        `mysqli' connection.                               
`select_db'Called by the following user API calls:            Since 1.0.0.
        `mysql_select_db', `mysql_list_tables',            
        `mysql_db_query', `mysql_list_fields',             
        `mysqli_select_db'.  Note, that SQL `USE' is not   
        monitored.                                         
`set_charset()'Called by the following user API calls:            Since 1.0.0.
        `mysql_set_charset'.  `mysqli_set_charset'.        
        Note, that SQL `SET NAMES' is not monitored.       
`set_server_option()'Called by the following user API calls:            Since 1.0.0.
        `mysqli_multi_query', `mysqli_real_query',         
        `mysqli_query', `mysql_query'.                     
`set_client_option()'Called by the following user API calls:            Since 1.0.0.
        `mysqli_options', `mysqli_ssl_set',                
        `mysqli_connect', `mysql_connect',                 
        `mysql_pconnect'.                                  
`set_autocommit()'Called by the following user API calls:            Since 1.0.0.
        `mysqli_autocommit',                               PHP >= 5.4.0.
        `PDO::setAttribute(PDO::ATTR_AUTOCOMMIT)'.         
`ssl_set()'Called by the following user API calls:            Since 1.1.0.
        `mysqli_ssl_set'.                                  

Broadcasting and lazy connections

The plugin does not proxy or `remember' all settings to apply them on
connections opened in the future. This is important to remember, if
using lazy connections. Lazy connections are connections which are not
opened before the client sends the first connection. Use of lazy
connections is the default plugin action.

The following connection library calls each changed state, and their
execution is recorded for later use when lazy connections are opened.
This helps ensure that the connection state of all connections in the
connection pool are comparable.

Unknown PHP API feature.

Library Notes                                              Version
call                                                       
`change_user()'User, password and database recorded for future    Since 1.1.0.
        use.                                               
`select_db'Database recorded for future use.                  Since 1.1.0.
`set_charset()'Calls `set_client_option(MYSQL_SET_CHARSET_NAME,   Since 1.1.0.
        charset)' on lazy connection to ensure `charset'   
        will be used upon opening the lazy connection.     
`set_autocommit()'Adds `SET AUTOCOMMIT=0|1' to the list of init      Since 1.1.0.
        commands of a lazy connection using                PHP >= 5.4.0.
        `set_client_option(MYSQL_INIT_COMMAND, "SET        
        AUTOCOMMIT=...%quot;)'.                            

*Connection state*:

The connection state is not only changed by API calls. Thus, even if
PECL mysqlnd_ms monitors all API calls, the application must still be
aware. Ultimately, it is the applications responsibility to maintain
the connection state, if needed.

Charsets and string escaping

Due to the use of lazy connections, which are a default, it can happen
that an application tries to escape a string for use within SQL
statements before a connection has been established.  In this case
string escaping is not possible. The string escape function does not
know what charset to use before a connection has been established.

To overcome the problem a new configuration setting `server_charset'
has been introduced in version 1.4.0.

Attention has to be paid on escaping strings with a certain charset but
using the result on a connection that uses a different charset. Please
note, that PECL/mysqlnd_ms manipulates connections and one application
level connection represents a pool of multiple connections that all may
have different default charsets. It is recommended to configure the
servers involved to use the same default charsets. The configuration
setting `server_charset' does help with this situation as well. If
using `server_charset', the plugin will set the given charset on all
newly opened connections.


File: manual.info,  Node: apis-php-mysqlnd-ms.transaction,  Next: apis-php-mysqlnd-ms.errorhandling,  Prev: apis-php-mysqlnd-ms.pooling,  Up: apis-php-mysqlnd-ms.concepts

22.9.2.18 Transaction handling
..............................

Copyright 1997-2012 the PHP Documentation Group.

Transaction handling is fundamentally changed. An SQL transaction is a
unit of work that is run on one database server. The unit of work
consists of one or more SQL statements.

By default the plugin is not aware of SQL transactions. The plugin may
switch connections for load balancing at any point in time. Connection
switches may happen in the middle of a transaction. This is against the
nature of an SQL transaction.  By default, the plugin is not
transaction safe.

Any kind of MySQL load balancer must be hinted about the begin and end
of a transaction. Hinting can either be done implicitly by monitoring
API calls or using SQL hints. Both options are supported by the plugin,
depending on your PHP version. API monitoring requires PHP 5.4.0 or
newer. The plugin, like any other MySQL load balancer, cannot detect
transaction boundaries based on the MySQL Client Server Protocol. Thus,
entirely transparent transaction aware load balancing is not possible.
The least intrusive option is API monitoring, which requires little to
no application changes, depending on your application.

Please, find examples of using SQL hints or the API monitoring in the
*Note examples section: apis-php-mysqlnd-ms.quickstart. The details
behind the API monitoring, which makes the plugin transaction aware,
are described below.

Beginning with PHP 5.4.0, the See section "apis-php-mysqli" in the
online manual library allows this plugin to subclass the library C API
call `set_autocommit()', to detect the status of `autocommit' mode.

The PHP MySQL extensions either issue a query (such as `SET
AUTOCOMMIT=0|1'), or use the mysqlnd library call `set_autocommit()' to
control the `autocommit' setting. If an extension makes use of
`set_autocommit()', the plugin can be made transaction aware.
Transaction awareness cannot be achieved if using SQL to set the
autocommit mode. The library function `set_autocommit()' is called by
the `mysqli_autocommit' and `PDO::setAttribute(PDO::ATTR_AUTOCOMMIT)'
user API calls.

The plugin configuration option trx_stickiness=master can be used to
make the plugin transactional aware. In this mode, the plugin stops
load balancing if autocommit becomes disabled, and directs all
statements to the master until autocommit gets enabled.

An application that does not want to set SQL hints for transactions but
wants to use the transparent API monitoring to avoid application
changes must make sure that the autocommit settings is changed
exclusively through the listed API calls.

API based transaction boundary detection has been improved with PHP
5.5.0 and PECL/mysqlnd_ms 1.5.0 to cover not only calls to
`mysqli_autocommit' but also `mysqli_begin'
(http://www.php.net/mysqli_begin), `mysqli_commit' and
`mysqli_rollback'.


File: manual.info,  Node: apis-php-mysqlnd-ms.errorhandling,  Next: apis-php-mysqlnd-ms.transient_errors,  Prev: apis-php-mysqlnd-ms.transaction,  Up: apis-php-mysqlnd-ms.concepts

22.9.2.19 Error handling
........................

Copyright 1997-2012 the PHP Documentation Group.

Applications using PECL/mysqlnd_ms should implement proper error
handling for all user API calls. And because the plugin changes the
semantics of a connection handle, API calls may return unexpected
errors. If using the plugin on a connection handle that no longer
represents an individual network connection, but a connection pool, an
error code and error message will be set on the connection handle
whenever an error occurs on any of the network connections behind.

If using lazy connections, which is the default, connections are not
opened until they are needed for query execution. Therefore, an API
call for a statement execution may return a connection error. In the
example below, an error is provoked when trying to run a statement on a
slave. Opening a slave connection fails because the plugin
configuration file lists an invalid host name for the slave.


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "invalid_host_name",
                 }
             },
             "lazy_connections": 1
         }
     }

The explicit activation of lazy connections is for demonstration
purpose only.


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (mysqli_connect_errno())
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     /* Connection 1, connection bound SQL user variable, no SELECT thus run on master */
     if (!$mysqli->query("SET @myrole='master'")) {
      printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     }

     /* Connection 2, run on slave because SELECT, provoke connection error */
     if (!($res = $mysqli->query("SELECT @myrole AS _role"))) {
      printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     } else {
      $row = $res->fetch_assoc();
      $res->close();
      printf("@myrole = '%s'\n", $row['_role']);
     }
     $mysqli->close();
     ?>

The above example will output something similar to:


     PHP Warning:  mysqli::query(): php_network_getaddresses: getaddrinfo failed: Name or service not known in %s on line %d
     PHP Warning:  mysqli::query(): [2002] php_network_getaddresses: getaddrinfo failed: Name or service not known (trying to connect via tcp://invalid_host_name:3306) in %s on line %d
     [2002] php_network_getaddresses: getaddrinfo failed: Name or service not known

Applications are expected to handle possible connection errors by
implementing proper error handling.

Depending on the use case, applications may want to handle connection
errors differently from other errors. Typical connection errors are
`2002 (CR_CONNECTION_ERROR) - Can't connect to local MySQL server
through socket '%s' (%d)', `2003 (CR_CONN_HOST_ERROR) - Can't connect
to MySQL server on '%s' (%d)' and `2005 (CR_UNKNOWN_HOST) - Unknown
MySQL server host '%s' (%d)'. For example, the application may test for
the error codes and manually perform a fail over. The plugins
philosophy is not to offer automatic fail over, beyond master fail
over, because fail over is not a transparent operation.


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "invalid_host_name"
                 },
                 "slave_1": {
                     "host": "192.168.78.136"
                 }
             },
             "lazy_connections": 1,
             "filters": {
                 "roundrobin": [

                 ]
             }
         }
     }

Explicitly activating lazy connections is done for demonstration
purposes, as is round robin load balancing as opposed to the default
`random once' type.


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (mysqli_connect_errno())
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     /* Connection 1, connection bound SQL user variable, no SELECT thus run on master */
     if (!$mysqli->query("SET @myrole='master'")) {
      printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     }

     /* Connection 2, first slave */
     $res = $mysqli->query("SELECT VERSION() AS _version");
     /* Hackish manual fail over */
     if (2002 == $mysqli->errno || 2003 == $mysqli->errno || 2004 == $mysqli->errno) {
       /* Connection 3, first slave connection failed, trying next slave */
       $res = $mysqli->query("SELECT VERSION() AS _version");
     }

     if (!$res) {
       printf("ERROR, [%d] '%s'\n", $mysqli->errno, $mysqli->error);
     } else {
      /* Error messages are taken from connection 3, thus no error */
      printf("SUCCESS, [%d] '%s'\n", $mysqli->errno, $mysqli->error);
      $row = $res->fetch_assoc();
      $res->close();
      printf("version = %s\n", $row['_version']);
     }
     $mysqli->close();
     ?>

The above example will output something similar to:


     [1045] Access denied for user 'username'@'localhost' (using password: YES)
     PHP Warning:  mysqli::query(): php_network_getaddresses: getaddrinfo failed: Name or service not known in %s on line %d
     PHP Warning:  mysqli::query(): [2002] php_network_getaddresses: getaddrinfo failed: Name or service not known (trying to connect via tcp://invalid_host_name:3306) in %s on line %d
     SUCCESS, [0] ''
     version = 5.6.2-m5-log

In some cases, it may not be easily possible to retrieve all errors
that occur on all network connections through a connection handle. For
example, let's assume a connection handle represents a pool of three
open connections. One connection to a master and two connections to the
slaves. The application changes the current database using the user API
call `mysqli_select_db', which then calls the mysqlnd library function
to change the schemata. mysqlnd_ms monitors the function, and tries to
change the current database on all connections to harmonize their
state. Now, assume the master succeeds in changing the database, and
both slaves fail. Upon the initial error from the first slave, the
plugin will set an appropriate error on the connection handle. The same
is done when the second slave fails to change the database. The error
message from the first slave is lost.

Such cases can be debugged by either checking for errors of the type
`E_WARNING' (see above) or, if no other option, investigation of the
*Note mysqlnd_ms debug and trace log: apis-php-mysqlnd-ms.debugging.


File: manual.info,  Node: apis-php-mysqlnd-ms.transient_errors,  Next: apis-php-mysqlnd-ms.failover,  Prev: apis-php-mysqlnd-ms.errorhandling,  Up: apis-php-mysqlnd-ms.concepts

22.9.2.20 Transient errors
..........................

Copyright 1997-2012 the PHP Documentation Group.

Some distributed database clusters make use of transient errors.  A
transient error is a temporary error that is likely to disappear soon.
By definition it is safe for a client to ignore a transient error and
retry the failed operation on the same database server. The retry is
free of side effects. Clients are not forced to abort their work or to
fail over to another database server immediately. They may enter a
retry loop before to wait for the error to disappear before giving up
on the database server. Transient errors can be seen, for example, when
using MySQL Cluster. But they are not bound to any specific clustering
solution per se.

`PECL/mysqlnd_ms' can perform an automatic retry loop in case of a
transient error. This increases distribution transparency and thus
makes it easier to migrate an application running on a single database
server to run on a cluster of database servers without having to change
the source of the application.

The automatic retry loop will repeat the requested operation up to a
user configurable number of times and pause between the attempts for a
configurable amount of time. If the error disappears during the loop,
the application will never see it.  If not, the error is forwarded to
the application for handling.

In the example below a duplicate key error is provoked to make the
plugin retry the failing query two times before the error is passed to
the application. Between the two attempts the plugin sleeps for 100
milliseconds.


     mysqlnd_ms.enable=1
     mysqlnd_ms.collect_statistics=1


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "192.168.78.136",
                     "port": "3306"
                 }
            },
            "transient_error": {
               "mysql_error_codes": [
                 1062
               ],
               "max_retries": 2,
               "usleep_retry": 100
            }
         }
     }


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (mysqli_connect_errno())
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     if (!$mysqli->query("DROP TABLE IF EXISTS test") ||
         !$mysqli->query("CREATE TABLE test(id INT PRIMARY KEY)") ||
         !$mysqli->query("INSERT INTO test(id) VALUES (1))")) {
       printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     }

     /* Retry loop is completely transparent. Checking statistics is
      the only way to know about implicit retries */
     $stats = mysqlnd_ms_get_stats();
     printf("Transient error retries before error: %d\n", $stats['transient_error_retries']);

     /* Provoking duplicate key error to see statistics change */
     if (!$mysqli->query("INSERT INTO test(id) VALUES (1))")) {
       printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     }

     $stats = mysqlnd_ms_get_stats();
     printf("Transient error retries after error: %d\n", $stats['transient_error_retries']);

     $mysqli->close();
     ?>

The above example will output something similar to:


     Transient error retries before error: 0
     [1062] Duplicate entry '1' for key 'PRIMARY'
     Transient error retries before error: 2

Because the execution of the retry loop is transparent from a users
point of view, the example checks the *Note statistics:
apis-php-function.mysqlnd-ms-get-stats.  provided by the plugin to
learn about it.

As the example shows, the plugin can be instructed to consider any
error transient regardless of the database servers error semantics. The
only error that a stock MySQL server considers temporary has the error
code

1297

. When configuring other error codes but

1297

make sure your configuration reflects the semantics of your clusters
error codes.

The following mysqlnd C API calls are monitored by the plugin to check
for transient errors: `query()', `change_user()', `select_db()',
`set_charset()', `set_server_option()' `prepare()', `execute()',
`set_autocommit()', `tx_begin()', `tx_commit()', `tx_rollback()',
`tx_commit_or_rollback()'. The corresponding user API calls have
similar names.

The maximum time the plugin may sleep during the retry loop depends on
the function in question. The a retry loop for `query()', `prepare()' or
`execute()' will sleep for up to `max_retries * usleep_retry'
milliseconds.

However, functions that *Note control connection state:
apis-php-mysqlnd-ms.pooling. are dispatched to all all connections. The
retry loop settings are applied to every connection on which the
command is to be run. Thus, such a function may interrupt program
execution for longer than a function that is run on one server only.
For example, `set_autocommit()' is dispatched to connections and may
sleep up to `(max_retries * usleep_retry) *
number_of_open_connections)' milliseconds. Please, keep this in mind
when setting long sleep times and large retry numbers. Using the
default settings of `max_retries=1', `usleep_retry=100' and
`lazy_connections=1' it is unlikely that you will ever see a delay of
more than 1 second.


File: manual.info,  Node: apis-php-mysqlnd-ms.failover,  Next: apis-php-mysqlnd-ms.loadbalancing,  Prev: apis-php-mysqlnd-ms.transient_errors,  Up: apis-php-mysqlnd-ms.concepts

22.9.2.21 Failover
..................

Copyright 1997-2012 the PHP Documentation Group.

By default, connection failover handling is left to the user.  The
application is responsible for checking return values of the database
functions it calls and reacting to possible errors. If, for example,
the plugin recognizes a query as a read-only query to be sent to the
slave servers, and the slave server selected by the plugin is not
available, the plugin will raise an error after not executing the
statement.

_Default: manual failover_

It is up to the application to handle the error and, if required,
re-issue the query to trigger the selection of another slave server for
statement execution. The plugin will make no attempts to failover
automatically, because the plugin cannot ensure that an automatic
failover will not change the state of the connection. For example, the
application may have issued a query which depends on SQL user variables
which are bound to a specific connection. Such a query might return
incorrect results if the plugin would switch the connection implicitly
as part of automatic failover. To ensure correct results, the
application must take care of the failover, and rebuild the required
connection state. Therefore, by default, no automatic failover is
performed by the plugin.

A user that does not change the connection state after opening a
connection may activate automatic failover. Please note, that automatic
failover logic is limited to connection attempts.  Automatic failover
is not used for already established connections. There is no way to
instruct the plugin to attempt failover on a connection that has been
connected to MySQL already in the past.

_Automatic failover_

The failover policy is configured in the plugins configuration file, by
using the failover configuration directive.

Automatic and silent failover can be enabled through the failover
configuration directive. Automatic failover can either be configured to
try exactly one master after a slave failure or, alternatively, loop
over slaves and masters before returning an error to the user. The
number of connection attempts can be limited and failed hosts can be
excluded from future load balancing attempts. Limiting the number of
retries and remembering failed hosts are considered experimental
features, albeit being reasonable stable. Syntax and semantics may
change in future versions.

Please note, since version 1.5.0 automatic failover is disabled for the
duration of a transaction if transaction stickiness is enabled and
transaction boundaries have been detected. The plugin will not switch
connections for the duration of a transaction. It will also not perform
automatic and silent failover. Instead an error will be thrown. It is
then left to the user to handle the failure of the transaction. Please
check, the `trx_stickiness' documentation how to do this.

A basic manual failover example is provided within the *Note error
handling: apis-php-mysqlnd-ms.errorhandling. section.

_Standby servers_

Using weighted load balancing, introduced in PECL/mysqlnd 1.4.0, it is
possible to configure standby servers that are sparsely used during
normal operations. A standby server that is primarily used as a
worst-case standby failover target can be assigned a very low
weight/priority in relation to all other servers. As long as all
servers are up and running the majority of the workload is assigned to
the servers which have hight weight values. Few requests will be
directed to the standby system which has a very low weight value.

Upon failure of the servers with a high priority, you can still
failover to the standby, which has been given a low load balancing
priority by assigning a low weight to it. Failover can be some manually
or automatically. If done automatically, you may want to combine it
with the `remember_failed' option.

At this point, it is not possible to instruct the load balancer to
direct no requests at all to a standby. This may not be much of a
limitation given that the highest weight you can assign to a server is
65535. Given two slaves, of which one shall act as a standby and has
been assigned a weight of 1, the standby will have to handle far less
than one percent of the overall workload.

_Failover and primary copy_

Please note, if using a primary copy cluster, such as MySQL
Replication, it is difficult to do connection failover in case of a
master failure. At any time there is only one master in the cluster for
a given dataset. The master is a single point of failure. If the master
fails, clients have no target to fail over write requests. In case of a
master outage the database administrator must take care of the
situation and update the client configurations, if need be.


File: manual.info,  Node: apis-php-mysqlnd-ms.loadbalancing,  Next: apis-php-mysqlnd-ms.rwsplit,  Prev: apis-php-mysqlnd-ms.failover,  Up: apis-php-mysqlnd-ms.concepts

22.9.2.22 Load balancing
........................

Copyright 1997-2012 the PHP Documentation Group.

Four load balancing strategies are supported to distribute statements
over the configured MySQL slave servers:

  1. random

     Chooses a random server whenever a statement is executed.

  2. random once (default)

     Chooses a random server after the first statement is executed, and
     uses the decision for the rest of the PHP request.

     It is the default, and the lowest impact on the connection state.

  3. round robin

     Iterates over the list of configured servers.

  4. user-defined via callback

     Is used to implement any other strategy.

The load balancing policy is configured in the plugins configuration
file using the random, roundrobin, and user *Note filters:
apis-php-mysqlnd-ms.filter.

Servers can be prioritized assigning a weight. A server that has been
given a weight of two will get twice as many requests as a server that
has been given the default weight of one.  Prioritization can be handy
in heterogenous environments. For example, you may want to assign more
requests to a powerful machine than to a less powerful. Or, you may
have configured servers that are close or far from the client, thus
expose different latencies.


File: manual.info,  Node: apis-php-mysqlnd-ms.rwsplit,  Next: apis-php-mysqlnd-ms.filter,  Prev: apis-php-mysqlnd-ms.loadbalancing,  Up: apis-php-mysqlnd-ms.concepts

22.9.2.23 Read-write splitting
..............................

Copyright 1997-2012 the PHP Documentation Group.

The plugin executes read-only statements on the configured MySQL
slaves, and all other queries on the MySQL master. Statements are
considered read-only if they either start with `SELECT', the SQL hint
`/*ms=slave*/', or if a slave had been chosen for running the previous
query and the query starts with the SQL hint `/*ms=last_used*/'. In all
other cases, the query will be sent to the MySQL replication master
server.  It is recommended to use the constants

MYSQLND_MS_SLAVE_SWITCH

,

MYSQLND_MS_MASTER_SWITCH

and

MYSQLND_MS_LAST_USED_SWITCH

instead of `/*ms=slave*/'. See also the *Note list of mysqlnd_ms
constants: apis-php-mysqlnd-ms.constants.

SQL hints are a special kind of standard compliant SQL comments.  The
plugin does check every statement for certain SQL hints. The SQL hints
are described within the *Note mysqlnd_ms constants:
apis-php-mysqlnd-ms.constants. documentation, constants that are
exported by the extension. Other systems involved with the statement
processing, such as the MySQL server, SQL firewalls, and SQL proxies,
are unaffected by the SQL hints, because those systems are designed to
ignore SQL comments.

The built-in read-write splitter can be replaced by a user-defined
filter, see also the user filter documentation.

A user-defined read-write splitter can request the built-in logic to
send a statement to a specific location, by invoking
`mysqlnd_ms_is_select' (http://www.php.net/mysqlnd_ms_is_select).

*Note*:

The built-in read-write splitter is not aware of multi-statements.
Multi-statements are seen as one statement.  The splitter will check
the beginning of the statement to decide where to run the statement.
If, for example, a multi-statement begins with `SELECT 1 FROM DUAL;
INSERT INTO test(id) VALUES (1); ...' the plugin will run it on a slave
although the statement is not read-only.


File: manual.info,  Node: apis-php-mysqlnd-ms.filter,  Next: apis-php-mysqlnd-ms.qos-consistency,  Prev: apis-php-mysqlnd-ms.rwsplit,  Up: apis-php-mysqlnd-ms.concepts

22.9.2.24 Filter
................

Copyright 1997-2012 the PHP Documentation Group.

*Version requirement*:

Filters exist as of mysqlnd_ms version 1.1.0-beta.

*Note filters: apis-php-mysqlnd-ms.plugin-ini-json.  PHP applications
that implement a MySQL replication cluster must first identify a group
of servers in the cluster which could execute a statement before the
statement is executed by one of the candidates. In other words: a
defined list of servers must be filtered until only one server is
available.

The process of filtering may include using one or more filters, and
filters can be chained. And they are executed in the order they are
defined in the plugins configuration file.

*Explanation: comparing filter chaining to pipes*:

The concept of chained filters can be compared to using pipes to
connect command line utilities on an operating system command shell.
For example, an input stream is passed to a processor, filtered, and
then transferred to be output. Then, the output is passed as input to
the next command, which is connected to the previous using the pipe
operator.

Available filters:

   * Load balancing filters: random and roundrobin.

   * Selection filter: user, user_multi, quality_of_service.

The `random' filter implements the 'random' and 'random once' load
balancing policies. The 'round robin' load balancing can be configured
through the `roundrobin' filter.  Setting a 'user defined callback' for
server selection is possible with the `user' filter. The
`quality_of_service' filter finds cluster nodes capable of delivering a
certain service, for example, read-your-writes or, not lagging more
seconds behind the master than allowed.

Filters can accept parameters to change their behaviour. The `random'
filter accepts an optional `sticky' parameter. If set to true, the
filter changes load balancing from random to random once. Random picks
a random server every time a statement is to be executed. Random once
picks a random server when the first statement is to be executed and
uses the same server for the rest of the PHP request.

One of the biggest strength of the filter concept is the possibility to
chain filters. This strength does not become immediately visible
because tje `random', `roundrobin' and `user' filters are supposed to
output no more than one server. If a filter reduces the list of
candidates for running a statement to only one server, it makes little
sense to use that one server as input for another filter for further
reduction of the list of candidates.

An example filter sequence that will fail:

   * Statement to be executed: `SELECT 1 FROM DUAL'. Passed to all
     filters.

   * All configured nodes are passed as input to the first filter.
     Master nodes: `master_0'.  Slave nodes:`slave_0', `slave_1'

   * Filter: `random', argument `sticky=1'.  Picks a random slave once
     to be used for the rest of the PHP request.  Output: `slave_0'.

   * Output of `slave_0' and the statement to be executed is passed as
     input to the next filter. Here: `roundrobin', server list passed
     to filter is: `slave_0'.

   * Filter: `roundrobin'. Server list consists of one server only,
     round robin will always return the same server.

If trying to use such a filter sequence, the plugin may emit a warning
like `(mysqlnd_ms) Error while creating filter '%s' . Non-multi filter
'%s' already created. Stopping in %s on line %d'. Furthermore, an
appropriate error on the connection handle may be set.

A second type of filter exists: multi filter. A multi filter emits
zero, one or multiple servers after processing. The
`quality_of_service' filter is an example. If the service quality
requested sets an upper limit for the slave lag and more than one slave
is lagging behind less than the allowed number of seconds, the filter
returns more than one cluster node. A multi filter must be followed by
other to further reduce the list of candidates for statement execution
until a candidate is found.

A filter sequence with the `quality_of_service' multi filter followed
by a load balancing filter.

   * Statement to be executed: `SELECT sum(price) FROM orders WHERE
     order_id = 1'.  Passed to all filters.

   * All configured nodes are passed as input to the first filter.
     Master nodes: `master_0'.  Slave nodes: `slave_0', `slave_1',
     `slave_2', `slave_3'

   * Filter: `quality_of_service', rule set: session_consistency
     (read-your-writes) Output: `master_0'

   * Output of `master_0' and the statement to be executed is passed as
     input to the next filter, which is `roundrobin'.

   * Filter: `roundrobin'. Server list consists of one server. Round
     robin selects `master_0'.

A filter sequence must not end with a multi filter. If trying to use a
filter sequence which ends with a multi filter the plugin may emit a
warning like `(mysqlnd_ms) Error in configuration. Last filter is multi
filter. Needs to be non-multi one. Stopping in %s on line %d'.
Furthermore, an appropriate error on the connection handle may be set.

*Speculation towards the future: MySQL replication filtering*:

In future versions, there may be additional multi filters.  For
example, there may be a `table' filter to support MySQL replication
filtering. This would allow you to define rules for which database or
table is to be replicated to which node of a replication cluster. Assume
your replication cluster consists of four slaves (`slave_0', `slave_1',
`slave_2', `slave_3') two of which replicate a database named `sales'
(`slave_0', `slave_1'). If the application queries the database
`slaves', the hypothetical `table' filter reduces the list of possible
servers to `slave_0' and `slave_1'. Because the output and list of
candidates consists of more than one server, it is necessary and
possible to add additional filters to the candidate list, for example,
using a load balancing filter to identify a server for statement
execution.


File: manual.info,  Node: apis-php-mysqlnd-ms.qos-consistency,  Next: apis-php-mysqlnd-ms.gtid,  Prev: apis-php-mysqlnd-ms.filter,  Up: apis-php-mysqlnd-ms.concepts

22.9.2.25 Service level and consistency
.......................................

Copyright 1997-2012 the PHP Documentation Group.

*Version requirement*:

Service levels have been introduced in mysqlnd_ms version 1.2.0-alpha.
*Note `mysqlnd_ms_set_qos': apis-php-function.mysqlnd-ms-set-qos.
requires PHP 5.4.0 or newer.

The plugin can be used with different kinds of MySQL database clusters.
Different clusters can deliver different levels of service to
applications. The service levels can be grouped by the data consistency
levels that can be achieved. The plugin knows about:

   * eventual consistency

   * session consistency

   * strong consistency

Depending how a cluster is used it may be possible to achieve higher
service levels than the default one. For example, a read from an
asynchronous MySQL replication slave is eventual consistent. Thus, one
may say the default consistency level of a MySQL replication cluster is
eventual consistency. However, if the master only is used by a client
for reading and writing during a session, session consistency (read
your writes) is given. PECL mysqlnd 1.2.0 abstracts the details of
choosing an appropriate node for any of the above service levels from
the user.

Service levels can be set through the qualify-of-service filter in the
*Note plugins configuration file: apis-php-mysqlnd-ms.plugin-ini-json.
and at runtime using the function *Note `mysqlnd_ms_set_qos':
apis-php-function.mysqlnd-ms-set-qos.

The plugin defines the different service levels as follows.

Eventual consistency is the default service provided by an asynchronous
cluster, such as classical MySQL replication. A read operation executed
on an arbitrary node may or may not return stale data. The applications
view of the data is eventual consistent.

Session consistency is given if a client can always read its own
writes. An asynchronous MySQL replication cluster can deliver session
consistency if clients always use the master after the first write or
never query a slave which has not yet replicated the clients write
operation.

The plugins understanding of strong consistency is that all clients
always see the committed writes of all other clients.  This is the
default when using MySQL Cluster or any other cluster offering
synchronous data distribution.

_Service level parameters_

Eventual consistency and session consistency service level accept
parameters.

Eventual consistency is the service provided by classical MySQL
replication. By default, all nodes qualify for read requests. An
optional `age' parameter can be given to filter out nodes which lag
more than a certain number of seconds behind the master. The plugin is
using `SHOW SLAVE STATUS' to measure the lag. Please, see the MySQL
reference manual to learn about accuracy and reliability of the `SHOW
SLAVE STATUS' command.

Session consistency (read your writes) accepts an optional `GTID'
parameter to consider reading not only from the master but also from
slaves which already have replicated a certain write described by its
transaction identifier. This way, when using asynchronous MySQL
replication, read requests may be load balanced over slaves while still
ensuring session consistency.

The latter requires the use of *Note client-side global transaction id
injection: apis-php-mysqlnd-ms.gtid.

_Advantages of the new approach_

The new approach supersedes the use of SQL hints and the configuration
option `master_on_write' in some respects. If an application running on
top of an asynchronous MySQL replication cluster cannot accept stale
data for certain reads, it is easier to tell the plugin to choose
appropriate nodes than prefixing all read statements in question with
the SQL hint to enforce the use of the master. Furthermore, the plugin
may be able to use selected slaves for reading.

The `master_on_write' configuration option makes the plugin use the
master after the first write (session consistency, read your writes).
In some cases, session consistency may not be needed for the rest of
the session but only for some, few read operations. Thus,
`master_on_write' may result in more read load on the master than
necessary. In those cases it is better to request a higher than default
service level only for those reads that actually need it. Once the
reads are done, the application can return to default service level.
Switching between service levels is only possible using *Note
`mysqlnd_ms_set_qos': apis-php-function.mysqlnd-ms-set-qos.

_Performance considerations_

A MySQL replication cluster cannot tell clients which slaves are
capable of delivering which level of service. Thus, in some cases,
clients need to query the slaves to check their status.  PECL
mysqlnd_ms transparently runs the necessary SQL in the background.
However, this is an expensive and slow operation.  SQL statements are
run if eventual consistency is combined with an age (slave lag) limit
and if session consistency is combined with a global transaction ID.

If eventual consistency is combined with an maximum age (slave lag),
the plugin selects candidates for statement execution and load
balancing for each statement as follows. If the statement is a write
all masters are considered as candidates. Slaves are not checked and
not considered as candidates. If the statement is a read, the plugin
transparently executes `SHOW SLAVE STATUS' on every slaves connection.
It will loop over all connections, send the statement and then start
checking for results. Usually, this is slightly faster than a loop over
all connections in which for every connection a query is send and the
plugin waits for its results. A slave is considered a candidate if
`SHOW SLAVE STATUS' reports `Slave_IO_Running=Yes',
`Slave_SQL_Running=Yes' and `Seconds_Behind_Master' is less or equal
than the allowed maximum age. In case of an SQL error, the plugin emits
a warning but does not set an error on the connection. The error is not
set to make it possible to use the plugin as a drop-in.

If session consistency is combined with a global transaction ID, the
plugin executes the SQL statement set with the `fetch_last_gtid' entry
of the `global_transaction_id_injection' section from the plugins
configuration file. Further details are identical to those described
above.

In version 1.2.0 no additional optimizations are done for executing
background queries. Future versions may contain optimizations,
depending on user demand.

If no parameters and options are set, no SQL is needed. In that case,
the plugin consider all nodes of the type shown below.

   * eventual consistency, no further options set: all masters, all
     slaves

   * session consistency, no further options set: all masters

   * strong consistency (no options allowed): all masters

_Throttling_

The quality of service filter can be combined with *Note Global
transaction IDs: apis-php-mysqlnd-ms.gtid. to throttle clients.
Throttling does reduce the write load on the master by slowing down
clients. If session consistency is requested and global transactions
idenentifier are used to check the status of a slave, the check can be
done in two ways. By default a slave is checked and skipped immediately
if it does not match the criteria for session consistency.
Alternatively, the plugin can wait for a slave to catch up to the
master until session consistency is possible. To enable the throttling,
you have to set wait_for_gtid_timeout configuration option.


File: manual.info,  Node: apis-php-mysqlnd-ms.gtid,  Next: apis-php-mysqlnd-ms.concept_cache,  Prev: apis-php-mysqlnd-ms.qos-consistency,  Up: apis-php-mysqlnd-ms.concepts

22.9.2.26 Global transaction IDs
................................

Copyright 1997-2012 the PHP Documentation Group.

*Version requirement*:

Client side global transaction ID injection exists as of mysqlnd_ms
version 1.2.0-alpha. Transaction boundaries are detected by monitoring
API calls. This is possible as of PHP 5.4.0. Please, see also *Note
Transaction handling: apis-php-mysqlnd-ms.transaction.

As of MySQL 5.6.5-m8 the MySQL server features built-in global
transaction identifiers. The MySQL built-in global transaction ID
feature is supported by PECL/mysqlnd_ms 1.3.0-alpha or later. Neither
are client-side transaction boundary monitoring nor any setup
activities required if using the server feature.

_Idea and client-side emulation_

PECL/mysqlnd_ms can do client-side transparent global transaction ID
injection. In its most basic form, a global transaction identifier is a
counter which is incremented for every transaction executed on the
master. The counter is held in a table on the master. Slaves replicate
the counter table.

In case of a master failure a database administrator can easily
identify the most recent slave for promiting it as a new master.  The
most recent slave has the highest transaction identifier.

Application developers can ask the plugin for the global transaction
identifier (GTID) for their last successful write operation. The plugin
will return an identifier that refers to an transaction no older than
that of the clients last write operation. Then, the GTID can be passed
as a parameter to the quality of service (QoS) filter as an option for
session consistency. Session consistency ensures read your writes. The
filter ensures that all reads are either directed to a master or a
slave which has replicated the write referenced by the GTID.

_When injection is done_

The plugin transparently maintains the GTID table on the master.  In
autocommit mode the plugin injects an `UPDATE' statement before
executing the users statement for every master use. In manual
transaction mode, the injection is done before the application calls
`commit()' to close a transaction. The configuration option
`report_error' of the GTID section in the plugins configuration file is
used to control whether a failed injection shall abort the current
operation or be ignored silently (default).

Please note, the PHP version requirements for *Note transaction
boundary monitoring: apis-php-mysqlnd-ms.transaction. and their limits.

_Limitations_

Client-side global transaction ID injection has shortcomings.  The
potential issues are not specific to PECL/mysqlnd_ms but are rather of
general nature.

   * Global transaction ID tables must be deployed on all masters and
     replicas.

   * The GTID can have holes. Only PHP clients using the plugin will
     maintain the table. Other clients will not.

   * Client-side transaction boundary detection is based on API calls
     only.

   * Client-side transaction boundary detection does not take implicit
     commit into account. Some MySQL SQL statements cause an implicit
     commit and cannot be rolled back.

_Using server-side global transaction identifier_

Starting with PECL/mysqlnd_ms 1.3.0-alpha the MySQL 5.6.5-m8 or newer
built-in global transaction identifier feature is supported. Use of the
server feature lifts all of the above listed limitations. Please, see
the MySQL Reference Manual for limitations and preconditions for using
server built-in global transaction identifiers.

Whether to use the client-side emulation or the server built-in
functionality is a question not directly related to the plugin, thus it
is not discussed in depth. There are no plans to remove the client-side
emulation and you can continue to use it, if the server-side solution
is no option. This may be the case in heterogenous environments with
old MySQL server or, if any of the server-side solution limitations is
not acceptable.

From an applications perspective there is hardly a difference in using
one or the other approach. The following properties differ.

   * Client-side emulation, as shown in the manual, is using an easy to
     compare sequence number for global transactions. Multi-master is
     not handled to keep the manual examples easy.

     Server-side built-in feature is using a combination of a server
     identifier and a sequence number as a global transaction
     identifier. Comparison cannot use numeric algebra. Instead a SQL
     function must be used. Please, see the MySQL Reference Manual for
     details.

   * Plugin global transaction ID statistics are only available with
     client-side emulation because they monitor the emulation.

*Global transaction identifiers in distributed systems*:

Global transaction identifiers can serve multiple purposes in the
context of distributed systems, such as a database cluster. Global
transaction identifiers can be used for, for example, system wide
identification of transactions, global ordering of transactions,
heartbeat mechanism and for checking the replication status of
replicas. PECL/mysqlnd_ms, a clientside driver based software, does
focus on using GTIDs for tasks that can be handled at the client, such
as checking the replication status of replicas for asynchronous
replication setups.


File: manual.info,  Node: apis-php-mysqlnd-ms.concept_cache,  Next: apis-php-mysqlnd-ms.supportedclusters,  Prev: apis-php-mysqlnd-ms.gtid,  Up: apis-php-mysqlnd-ms.concepts

22.9.2.27 Cache integration
...........................

Copyright 1997-2012 the PHP Documentation Group.

*Version requirement*:

The feature requires use of PECL/mysqlnd_ms 1.3.0-beta or later, and
PECL/mysqlnd_qc 1.1.0-alpha or newer.  PECL/mysqlnd_ms must be compiled
to support the feature. PHP 5.4.0 or newer is required.

*Setup: extension load order*:

PECL/mysqlnd_ms must be loaded before PECL/mysqlnd_qc, when using
shared extensions.

*Feature stability*:

The cache integration is of beta quality.

*Suitable MySQL clusters*:

The feature is targeted for use with MySQL Replication (primary copy).
Currently, no other kinds of MySQL clusters are supported. Users of
such cluster must control PECL/mysqlnd_qc manually if they are
interested in client-side query caching.

Support for MySQL replication clusters (asynchronous primary copy) is
the main focus of PECL/mysqlnd_ms. The slaves of a MySQL replication
cluster may or may not reflect the latest updates from the master.
Slaves are asynchronous and can lag behind the master. A read from a
slave is eventual consistent from a cluster-wide perspective.

The same level of consistency is offered by a local cache using
time-to-live (TTL) invalidation strategy. Current data or stale data
may be served. Eventually, data searched for in the cache is not
available and the source of the cache needs to be accessed.

Given that both a MySQL Replication slave (asynchronous secondary) and
a local TTL-driven cache deliver the same level of service it is
possible to transparently replace a remote database access with a local
cache access to gain better possibility.

As of PECL/mysqlnd_ms 1.3.0-beta the plugin is capable of transparently
controlling PECL/mysqlnd_ms 1.1.0-alpha or newer to cache a read-only
query if explicitly allowed by setting an appropriate quality of
service through *Note `mysqlnd_ms_set_qos':
apis-php-function.mysqlnd-ms-set-qos.  Please, see the *Note
quickstart: apis-php-mysqlnd-ms.quickstart.cache.  for a code example.
Both plugins must be installed, PECL/mysqlnd_ms must be compiled to
support the cache feature and PHP 5.4.0 or newer has to be used.

Applications have full control of cache usage and can request fresh
data at any time, if need be. Thec ache usage can be enabled and
disabled time during the execution of a script. The cache will be used
if *Note `mysqlnd_ms_set_qos': apis-php-function.mysqlnd-ms-set-qos.
sets the quality of service to eventual consistency and enables cache
usage. Cache usage is disabled by requesting higher consistency levels,
for example, session consistency (read your writes). Once the quality
of service has been relaxed to eventual consistency the cache can be
used again.

If caching is enabled for a read-only statement, PECL/mysqlnd_ms may
inject *Note SQL hints to control caching:
apis-php-mysqlnd-qc.quickstart.caching. by PECL/mysqlnd_qc. It may
modify the SQL statement it got from the application. Subsequent SQL
processors are supposed to ignore the SQL hints. A SQL hint is a SQL
comment. Comments must not be ignored, for example, by the database
server.

The TTL of a cache entry is computed on a per statement basis.
Applications set an maximum age for the data they want to retrieve using
*Note `mysqlnd_ms_set_qos': apis-php-function.mysqlnd-ms-set-qos.  The
age sets an approximate upper limit of how many seconds the data
returned may lag behind the master.

The following logic is used to compute the actual TTL if caching is
enabled. The logic takes the estimated slave lag into account for
choosing a TTL. If, for example, there are two slaves lagging 5 and 10
seconds behind and the maximum age allowed is 60 seconds, the TTL is
set to 50 seconds. Please note, the age setting is no more than an
estimated guess.

   * Check whether the statement is read-only. If not, don't cache.

   * If caching is enabled, check the slave lag of all configured
     slaves.  Establish slave connections if none exist so far and lazy
     connections are used.

   * Send `SHOW SLAVE STATUS' to all slaves. Do not wait for the first
     slave to reply before sending to the second slave. Clients often
     wait long for replies, thus we send out all requests in a burst
     before fetching in a second stage.

   * Loop over all slaves. For every slave wait for its reply. Do not
     start checking another slave before the currently waited for slave
     has replied.  Check for `Slave_IO_Running=Yes' and
     `Slave_SQL_Running=Yes'.  If both conditions hold true, fetch the
     value of `Seconds_Behind_Master'.  In case of any errors or if
     conditions fail, set an error on the slave connection.  Skip any
     such slave connection for the rest of connection filtering.

   * Search for the maximum value of `Seconds_Behind_Master' from all
     slaves that passed the previous conditions. Subtract the value from
     the maximum age provided by the user with *Note
     `mysqlnd_ms_set_qos': apis-php-function.mysqlnd-ms-set-qos.  Use
     the result as a TTL.

   * The filtering may sort out all slaves. If so, the maximum age is
     used as TTL, because the maximum lag found equals zero. It is
     perfectly valid to sort out all slaves. In the following it is up
     to subsequent filter to decide what to do. The built-in load
     balancing filter will pick the master.

   * Inject the appropriate SQL hints to enable caching by
     PECL/mysqlnd_qc.

   * Proceed with the connection filtering, e.g. apply load balancing
     rules to pick a slave.

   * PECL/mysqlnd_qc is loaded after PECL/mysqlnd_ms by PHP. Thus, it
     will see all query modifications of PECL/mysqlnd_ms and cache the
     query if instructed to do so.

The algorithm may seem expensive. `SHOW SLAVE STATUS' is a very fast
operation. Given a sufficient number of requests and cache hits per
second the cost of checking the slaves lag can easily outweight the
costs of the cache decision.

Suggestions on a better algorithm are always welcome.


File: manual.info,  Node: apis-php-mysqlnd-ms.supportedclusters,  Prev: apis-php-mysqlnd-ms.concept_cache,  Up: apis-php-mysqlnd-ms.concepts

22.9.2.28 Supported clusters
............................

Copyright 1997-2012 the PHP Documentation Group.

Any application using any kind of MySQL cluster is faced with the same
tasks:

   * Identify nodes capable of executing a given statement with the
     required service level

   * Load balance requests within the list of candidates

   * Automatic fail over within candidates, if needed

The plugin is optimized for fulfilling these tasks in the context of a
classical asynchronous MySQL replication cluster consisting of a single
master and many slaves (primary copy).  When using classical,
asynchronous MySQL replication all of the above listed tasks need to be
mastered at the client side.

Other types of MySQL cluster may have lower requirements on the
application side. For example, if all nodes in the cluster can answer
read and write requests, no read-write splitting needs to be done
(multi-master, update-all). If all nodes in the cluster are
synchronous, they automatically provide the highest possible quality of
service which makes choosing a node easier. In this case, the plugin
may serve the application after some reconfiguration to disable certain
features, such as built-in read-write splitting.

*Documentation focus*:

The documentation focusses describing the use of the plugin with
classical asynchronous MySQL replication clusters (primary copy).
Support for this kind of cluster has been the original development
goal. Use of other clusters is briefly described below. Please note,
that this is still work in progress.

_Primary copy (MySQL Replication)_

This is the primary use case of the plugin. Follow the hints given in
the descriptions of each feature.

   * Configure one master and one or more slaves.  Server configuration
     details are given in the setup section.

   * Use random load balancing policy together with the sticky flag.

   * If you do not plan to use the *Note service level:
     apis-php-mysqlnd-ms.quickstart.qos-consistency. API calls, add the
     master on write flag.

   * Please, make yourself aware of the properties of automatic
     failover before adding a failover directive.

   * Consider the use of trx_stickiness to execute transactions on the
     primary only. Please, read carefully how it works before you rely
     on it.


     mysqlnd_ms.enable=1
     mysqlnd_ms.config_file=/path/to/mysqlnd_ms_plugin.ini


     {
       "myapp": {
         "master": {
           "master_1": {
             "host": "localhost",
             "socket": "\/tmp\/mysql57.sock"
           }
         },
         "slave": {
           "slave_0": {
             "host": "127.0.0.1",
             "port": 3308
           },
           "slave_1": {
             "host": "192.168.2.28",
             "port": 3306
           }
         },
         "filters": {
           "random": {
             "sticky": "1"
           }
         }
       }
     }

_Primary copy with multi primaries (MMM - MySQL Multi Master)_

MySQL Replication allows you to create cluster topologies with multiple
masters (primaries). Write-write conflicts are not handled by the
replication system. This is no update anywhere setup. Thus, data must
be partitioned manually and clients must redirected in accordance to
the partitioning rules. The recommended setup is equal to the sharding
setup below.

_Manual sharding, possibly combined with primary copy and multiple
primaries_

Use SQL hints and the node group filter for clusters that use data
partitioning but leave query redirection to the client. The example
configuration shows a multi master setup with two shards.


     mysqlnd_ms.enable=1
     mysqlnd_ms.config_file=/path/to/mysqlnd_ms_plugin.ini
     mysqlnd_ms.multi_master=1


     {
       "myapp": {
         "master": {
           "master_1": {
             "host": "localhost",
             "socket": "\/tmp\/mysql57.sock"
           }
           "master_2": {
             "host": "192.168.2.27",
             "socket": "3306"
           }
         },
         "slave": {
           "slave_1": {
             "host": "127.0.0.1",
             "port": 3308
           },
           "slave_2": {
             "host": "192.168.2.28",
             "port": 3306
           }
         },
         "filters": {
           "node_groups": {
             "Partition_A" : {
               "master": ["master_1"],
               "slave": ["slave_1"]
             },
             "Partition_B" : {
               "master": ["master_2"],
               "slave": ["slave_2"]
             }
           },
           "roundrobin": []
         }
       }
     }

The plugin can also be used with a loose collection of unrelated
shards. For such a cluster, configure masters only and disable read
write splitting. The nodes of such a cluster are called masters in the
plugin configuration as they accept both reads and writes for their
partition.

_Using synchronous update everywhere clusters such as MySQL Cluster_

MySQL Cluster is a synchronous cluster solution. All cluster nodes
accept read and write requests. In the context of the plugin, all nodes
shall be considered as masters.

Use the load balancing and fail over features only.

   * Disable the plugins *Note built-in read-write splitting:
     apis-php-mysqlnd-ms.rwsplit.

   * Configure masters only.

   * Consider random once load balancing strategy, which is the plugins
     default.  If random once is used, only masters are configured and
     no SQL hints are used to force using a certain node, no connection
     switches will happen for the duration of a web request. Thus, no
     special handling is required for transactions. The plugin will
     pick one master at the beginning of the PHP script and use it
     until the script terminates.

   * Do not set the quality of service. All nodes have all the data.
     This automatically gives you the highest possible service quality
     (strong consistency).

   * Do not enable client-side global transaction injection. It is
     neither required to help with server-side fail over nor to assist
     the quality of service filter choosing an appropriate node.

Disabling built-in read-write splitting.

   * Set *Note `mysqlnd_ms.disable_rw_split=1':
     apis-php-mysqlnd-ms.configuration.

   * Do not use *Note SQL hints: apis-php-mysqlnd-ms.rwsplit.  to
     enforce the use of slaves

Configure masters only.

   * Set *Note `mysqlnd_ms.multi_master=1'.:
     apis-php-mysqlnd-ms.configuration.

   * Do not configure any slaves.

   * Set `*Note failover=loop_before_master:
     apis-php-mysqlnd-ms.plugin-ini-json.' in the plugins configuration
     file to avoid warnings about the empty slave list and to make the
     failover logic loop over all configured masters before emitting an
     error.

     Please, note the warnings about automatic failover given in the
     previous sections.


     mysqlnd_ms.enable=1
     mysqlnd_ms.config_file=/path/to/mysqlnd_ms_plugin.ini
     mysqlnd_ms.multi_master=1
     mysqlnd_ms.disable_rw_split=1


       "myapp": {
         "master": {
           "master_1": {
             "host": "localhost",
             "socket": "\/tmp\/mysql57.sock"
           },
           "master_2": {
             "host": "192.168.2.28",
             "port": 3306
           }
         },
         "slave": {
         },
         "filters": {
           "roundrobin": {
           }
         },
         "failover": {
           "strategy": "loop_before_master",
           "remember_failed": true
         }
       }
     }

If running an update everywhere cluster that has no built-in
partitioning to avoid hot spots and high collision rates, consider
using the node groups filter to keep updates on a frequently accessed
table on one of the nodes. This may help to reduce collision rates and
thus improve performance.


File: manual.info,  Node: apis-php-mysqlnd-ms.setup,  Next: apis-php-mysqlnd-ms.constants,  Prev: apis-php-mysqlnd-ms.concepts,  Up: apis-php-book.mysqlnd-ms

22.9.2.29 Installing/Configuring
................................

* Menu:

* apis-php-mysqlnd-ms.requirements::  Requirements
* apis-php-mysqlnd-ms.installation::  Installation
* apis-php-mysqlnd-ms.configuration::  Runtime Configuration
* apis-php-mysqlnd-ms.plugin-ini-json::  Plugin configuration file (>=1.1.x)
* apis-php-mysqlnd-ms.plugin-ini-v1::  Plugin configuration file (<= 1.0.x)
* apis-php-mysqlnd-ms.testing::  Testing
* apis-php-mysqlnd-ms.debugging::  Debugging and Tracing
* apis-php-mysqlnd-ms.monitoring::  Monitoring

Copyright 1997-2012 the PHP Documentation Group.


File: manual.info,  Node: apis-php-mysqlnd-ms.requirements,  Next: apis-php-mysqlnd-ms.installation,  Prev: apis-php-mysqlnd-ms.setup,  Up: apis-php-mysqlnd-ms.setup

22.9.2.30 Requirements
......................

Copyright 1997-2012 the PHP Documentation Group.

`PHP 5.3.6' or newer. Some advanced functionality requires `PHP 5.4.0'
or newer.

The `mysqlnd_ms' replication and load balancing plugin supports all PHP
applications and all available PHP MySQL extensions (mysqli, mysql, See
section "apis-php-ref.pdo-mysql" in the online manual). The PHP MySQL
extension must be configured to use See section "apis-php-mysqli" in
the online manual in order to be able to use the `mysqlnd_ms' plugin for
See section "apis-php-mysqli" in the online manual.


File: manual.info,  Node: apis-php-mysqlnd-ms.installation,  Next: apis-php-mysqlnd-ms.configuration,  Prev: apis-php-mysqlnd-ms.requirements,  Up: apis-php-mysqlnd-ms.setup

22.9.2.31 Installation
......................

Copyright 1997-2012 the PHP Documentation Group.

This PECL (http://pecl.php.net/) extension is not bundled with PHP.

Information for installing this PECL extension may be found in the
manual chapter titled Installation of PECL extensions
(http://www.php.net/install.pecl). Additional information such as new
releases, downloads, source files, maintainer information, and a
CHANGELOG, can be located here: http://pecl.php.net/package/mysqlnd_ms
(http://pecl.php.net/package/mysqlnd_ms)

A DLL for this PECL extension is currently unavailable. See also the
building on Windows (http://www.php.net/install.windows.building)
section.


File: manual.info,  Node: apis-php-mysqlnd-ms.configuration,  Next: apis-php-mysqlnd-ms.plugin-ini-json,  Prev: apis-php-mysqlnd-ms.installation,  Up: apis-php-mysqlnd-ms.setup

22.9.2.32 Runtime Configuration
...............................

Copyright 1997-2012 the PHP Documentation Group.

The behaviour of these functions is affected by settings in `php.ini'.

*Mysqlnd_ms Configure Options*

Name               Default            Changeable         Changelog
mysqlnd_ms.enable  0                  PHP_INI_SYSTEM     
mysqlnd_ms.force_config_usage0                  PHP_INI_SYSTEM     
mysqlnd_ms.ini_file""                 PHP_INI_SYSTEM     
mysqlnd_ms.config_file""                 PHP_INI_SYSTEM     
mysqlnd_ms.collect_statistics0                  PHP_INI_SYSTEM     
mysqlnd_ms.multi_master0                  PHP_INI_SYSTEM     
mysqlnd_ms.disable_rw_split0                  PHP_INI_SYSTEM     

Here's a short explanation of the configuration directives.

  1. mysqlnd_ms.enable integer

     Enables or disables the plugin. If disabled, the extension will
     not plug into See section "apis-php-mysqli" in the online manual
     to proxy internal See section "apis-php-mysqli" in the online
     manual C API calls.

  2. mysqlnd_ms.force_config_usage integer

     If enabled, the plugin checks if the host (server) parameters
     value of any MySQL connection attempt, matches a section name from
     the plugin configuration file. If not, the connection attempt is
     blocked.

     This setting is not only useful to restrict PHP to certain servers
     but also to debug configuration file problems. The configuration
     file validity is checked at two different stages. The first check
     is performed when PHP begins to handle a web request. At this
     point the plugin reads and decodes the configuration file. Errors
     thrown at this early stage in an extensions life cycle may not be
     shown properly to the user. Thus, the plugin buffers the errors,
     if any, and additionally displays them when establishing a
     connection to MySQL. By default a buffered startup error will emit
     an error of type `E_WARNING'. If `force_config_usage' is set, the
     error type used is `E_RECOVERABLE_ERROR'.

     Please, see also configuration file debugging notes.

  3. mysqlnd_ms.ini_file string

     Plugin specific configuration file. This setting has been renamed
     to `mysqlnd_ms.config_file' in version 1.4.0.

  4. mysqlnd_ms.config_file string

     Plugin specific configuration file. This setting superseeds
     `mysqlnd_ms.ini_file' since 1.4.0.

  5. mysqlnd_ms.collect_statistics integer

     Enables or disables the collection of statistics. The collection
     of statistics is disabled by default for performance reasons.
     Statistics are returned by the function *Note
     `mysqlnd_ms_get_stats': apis-php-function.mysqlnd-ms-get-stats.

  6. mysqlnd_ms.multi_master integer

     Enables or disables support of MySQL multi master replication
     setups. Please, see also *Note supported clusters:
     apis-php-mysqlnd-ms.supportedclusters.

  7. mysqlnd_ms.disable_rw_split integer

     Enables or disables built-in read write splitting.

     Controls whether load balancing and lazy connection functionality
     can be used independently of read write splitting. If read write
     splitting is disabled, only servers from the master list will be
     used for statement execution. All configured slave servers will be
     ignored.

     The SQL hint `MYSQLND_MS_USE_SLAVE' will not be recognized. If
     found, the statement will be redirected to a master.

     Disabling read write splitting impacts the return value of *Note
     `mysqlnd_ms_query_is_select':
     apis-php-function.mysqlnd-ms-query-is-select.  The function will
     no longer propose query execution on slave servers.

     *Multiple master servers*:

     Setting `mysqlnd_ms.multi_master=1' allows the plugin to use
     multiple master servers, instead of only the first master server
     of the master list.

     Please, see also *Note supported clusters:
     apis-php-mysqlnd-ms.supportedclusters.


File: manual.info,  Node: apis-php-mysqlnd-ms.plugin-ini-json,  Next: apis-php-mysqlnd-ms.plugin-ini-v1,  Prev: apis-php-mysqlnd-ms.configuration,  Up: apis-php-mysqlnd-ms.setup

22.9.2.33 Plugin configuration file (>=1.1.x)
.............................................

Copyright 1997-2012 the PHP Documentation Group.

*Changelog: Feature was added in PECL/mysqlnd_ms 1.1.0-beta*:

The below description applies to PECL/mysqlnd_ms >= 1.1.0-beta. It is
not valid for prior versions.

The plugin uses its own configuration file. The configuration file
holds information about the MySQL replication master server, the MySQL
replication slave servers, the server pick (load balancing) policy, the
failover strategy, and the use of lazy connections.

The plugin loads its configuration file at the beginning of a web
request. It is then cached in memory and used for the duration of the
web request. This way, there is no need to restart PHP after deploying
the configuration file.  Configuration file changes will become active
almost instantly.

The PHP configuration directive `mysqlnd_ms.config_file' is used to set
the plugins configuration file. Please note, that the PHP configuration
directive may not be evaluated for every web request. Therefore,
changing the plugins configuration file name or location may require a
PHP restart. However, no restart is required to read changes if an
already existing plugin configuration file is updated.

Using and parsing JSON is efficient, and using JSON makes it easier to
express hierarchical data structures than the standard `php.ini' format.

Or alternatively, a developer may be more familiar with the PHP array
syntax, and prefer it. This example demonstrates how a developer might
convert a PHP array to JSON.


     <?php
     $config = array(
       "myapp" => array(
         "master" => array(
           "master_0" => array(
             "host"   => "localhost",
             "socket" => "/tmp/mysql.sock",
           ),
         ),
         "slave" => array(),
       ),
     );

     file_put_contents("mysqlnd_ms.ini", json_encode($config, JSON_PRETTY_PRINT));
     printf("mysqlnd_ms.ini file created...\n");
     printf("Dumping file contents...\n");
     printf("%s\n", str_repeat("-", 80));
     echo file_get_contents("mysqlnd_ms.ini");
     printf("\n%s\n", str_repeat("-", 80));
     ?>

The above example will output:


     mysqlnd_ms.ini file created...
     Dumping file contents...
     --------------------------------------------------------------------------------
     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost",
                     "socket": "\/tmp\/mysql.sock"
                 }
             },
             "slave": [

             ]
         }
     }
     --------------------------------------------------------------------------------

A plugin configuration file consists of one or more sections.  Sections
are represented by the top-level object properties of the object
encoded in the JSON file. Sections could also be called _configuration
names_.

Applications reference sections by their name. Applications use section
names as the host (server) parameter to the various connect methods of
the mysqli, mysql and See section "apis-php-ref.pdo-mysql" in the
online manual extensions.  Upon connect, the See section
"apis-php-mysqli" in the online manual plugin compares the hostname
with all of the section names from the plugin configuration file. If
the hostname and section name match, then the plugin will load the
settings for that section.


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "192.168.2.27"
                 },
                 "slave_1": {
                     "host": "192.168.2.27",
                     "port": 3306
                 }
             }
         },
         "localhost": {
             "master": [
                 {
                     "host": "localhost",
                     "socket": "\/path\/to\/mysql.sock"
                 }
             ],
             "slave": [
                 {
                     "host": "192.168.3.24",
                     "port": "3305"
                 },
                 {
                     "host": "192.168.3.65",
                     "port": "3309"
                 }
             ]
         }
     }


     <?php
     /* All of the following connections will be load balanced */
     $mysqli = new mysqli("myapp", "username", "password", "database");
     $pdo = new PDO('mysql:host=myapp;dbname=database', 'username', 'password');
     $mysql = mysql_connect("myapp", "username", "password");

     $mysqli = new mysqli("localhost", "username", "password", "database");
     ?>

Section names are strings. It is valid to use a section name such as
`192.168.2.1', `127.0.0.1' or `localhost'.  If, for example, an
application connects to `localhost' and a plugin configuration section
`localhost' exists, the semantics of the connect operation are changed.
The application will no longer only use the MySQL server running on the
host `localhost', but the plugin will start to load balance MySQL
queries following the rules from the `localhost' configuration section.
This way you can load balance queries from an application without
changing the applications source code. Please keep in mind, that such a
configuration may not contribute to overall readability of your
applications source code. Using section names that can be mixed up with
host names should be seen as a last resort.

Each configuration section contains, at a minimum, a list of master
servers and a list of slave servers. The master list is configured with
the keyword `master', while the slave list is configured with the
`slave' keyword. Failing to provide a slave list will result in a fatal

E_ERROR

level error, although a slave list may be empty. It is possible to
allow no slaves. However, this is only recommended with synchronous
clusters, please see also *Note supported clusters:
apis-php-mysqlnd-ms.supportedclusters. The main part of the
documentation focusses on the use of asynchronous MySQL replication
clusters.

The master and slave server lists can be optionally indexed by symbolic
names for the servers they describe. Alternatively, an array of
descriptions for slave and master servers may be used.


     "slave": [
         {
             "host": "192.168.3.24",
             "port": "3305"
         },
         {
             "host": "192.168.3.65",
             "port": "3309"
         }
     ]

An anonymous server list is encoded by the `JSON array' type.
Optionally, symbolic names may be used for indexing the slave or master
servers of a server list, and done so using the `JSON object' type.


     "master": {
         "master_0": {
             "host": "localhost"
         }
     }

It is recommended to index the server lists with symbolic server names.
The alias names will be shown in error messages.

The order of servers is preserved and taken into account by mysqlnd_ms.
If, for example, you configure round robin load balancing strategy, the
first `SELECT' statement will be executed on the slave that appears
first in the slave server list.

A configured server can be described with the `host', `port', `socket',
`db', `user', `password' and `connect_flags'. It is mandatory to set the
database server host using the `host' keyword.  All other settings are
optional.


     {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "db_server_host",
                     "port": "db_server_port",
                     "socket": "db_server_socket",
                     "db": "database_resp_schema",
                     "user": "user",
                     "password": "password",
                     "connect_flags": 0
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "db_server_host",
                     "port": "db_server_port",
                     "socket": "db_server_socket"
                 }
             }
         }
     }

If a setting is omitted, the plugin will use the value provided by the
user API call used to open a connection. Please, see the using section
names example above.

The configuration file format has been changed in version 1.1.0-beta to
allow for chained filters. Filters are responsible for filtering the
configured list of servers to identify a server for execution of a
given statement. Filters are configured with the `filter' keyword.
Filters are executed by mysqlnd_ms in the order of their appearance.
Defining filters is optional. A configuration section in the plugins
configuration file does not need to have a `filters' entry.

Filters replace the `pick[]' setting from prior versions. The new
`random' and `roundrobin' provide the same functionality.


        {
         "myapp": {
             "master": {
                 "master_0": {
                     "host": "localhost"
                 }
             },
             "slave": {
                 "slave_0": {
                     "host": "192.168.78.136",
                     "port": "3306"
                 },
                 "slave_1": {
                     "host": "192.168.78.137",
                     "port": "3306"
                 }
             },
             "filters": {
                 "roundrobin": [

                 ]
             }
         }
     }

The function *Note `mysqlnd_ms_set_user_pick_server':
apis-php-function.mysqlnd-ms-set-user-pick-server.  has been removed.
Setting a callback is now done with the `user' filter. Some filters
accept parameters.  The `user' filter requires and accepts a mandatory
`callback' parameter to set the callback previously set through the
function *Note `mysqlnd_ms_set_user_pick_server':
apis-php-function.mysqlnd-ms-set-user-pick-server.


     "filters": {
         "user": {
             "callback": "pick_server"
         }
     }

The validity of the configuration file is checked both when reading the
configuration file and later when establishing a connection. The
configuration file is read during PHP request startup. At this early
stage a PHP extension may not display error messages properly. In the
worst case, no error is shown and a connection attempt fails without an
adequate error message. This problem has been cured in version 1.5.0.


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     ?>

The above example will output:


     Warning: mysqli::mysqli(): (mysqlnd_ms) (mysqlnd_ms) Failed to parse config file [s1.json]. Please, verify the JSON in Command line code

     Warning: mysqli::mysqli(): (HY000/2002): php_network_getaddresses: getaddrinfo failed: Name or service not known in Command line code on line 1

     Warning: mysqli::query(): Couldn't fetch mysqli in Command line code on line 1

     Fatal error: Call to a member function fetch_assoc() on a non-object in Command line code on line 1

Since version 1.5.0 startup errors are additionally buffered and
emitted when a connection attempt is made. Use the configuration
directive `mysqlnd_ms.force_config_usage' to set the error type used to
display buffered errors. By default an error of type `E_WARNING' will be
emitted.


     <?php
     $mysqli = new mysqli("myapp", "username", "password", "database");
     ?>

The above example will output:


     Warning: mysqli::mysqli(): (mysqlnd_ms) (mysqlnd_ms) Failed to parse config file [s1.json]. Please, verify the JSON in Command line code on line 1

It can be useful to set `mysqlnd_ms.force_config_usage = 1' when
debugging potential configuration file errors. This will not only turn
the type of buffered startup errors into `E_RECOVERABLE_ERROR' but also
help detecting misspelled section names.


     mysqlnd_ms.force_config_usage=1


     <?php
     $mysqli = new mysqli("invalid_section", "username", "password", "database");
     ?>

The above example will output:


     Warning: mysqli::mysqli(): (mysqlnd_ms) Exclusive usage of configuration enforced but did not find the correct INI file section (invalid_section) in Command line code on line 1 line 1

Here is a short explanation of the configuration directives that can be
used.

  1. master array or object

     List of MySQL replication master servers. The list of either of
     the `JSON type array' to declare an anonymous list of servers or
     of the `JSON type object'. Please, see above for examples.

     Setting at least one master server is mandatory. The plugin will
     issue an error of type `E_ERROR' if the user has failed to provide
     a master server list for a configuration section. The fatal error
     may read `(mysqlnd_ms) Section [master] doesn't exist for host
     [name_of_a_config_section] in %s on line %d'.

     A server is described with the `host', `port', `socket', `db',
     `user', `password' and `connect_flags'. It is mandatory to provide
     at a value for `host'. If any of the other values is not given, it
     will be taken from the user API connect call, please, see also:
     using section names example.

     Table of server configuration keywords.

     Unknown PHP API feature.

     Keyword Description                                     Version
     `host'  Database server host. This is a mandatory       Since 1.1.0.
             setting. Failing to provide, will cause an      
             error of type `E_RECOVERABLE_ERROR' when the    
             plugin tries to connect to the server. The      
             error message may read `(mysqlnd_ms) Cannot     
             find [host] in [%s] section in config in %s on  
             line %d'.                                       
     `port'  Database server TCP/IP port.                    Since 1.1.0.
     `socket'Database server Unix domain socket.             Since 1.1.0.
     `db'    Database (schemata).                            Since 1.1.0.
     `user'  MySQL database user.                            Since 1.1.0.
     `password'MySQL database user password.                   Since 1.1.0.
     `connect_flags'Connection flags.                               Since 1.1.0.

     The plugin supports using only one master server. An experimental
     setting exists to enable multi-master support. The details are not
     documented. The setting is meant for development only.

  2. slave array or object

     List of one or more MySQL replication slave servers. The syntax is
     identical to setting master servers, please, see `master' above
     for details.

     The plugin supports using one or more slave servers.

     Setting a list of slave servers is mandatory. The plugin will
     report an error of the type `E_ERROR' if `slave' is not given for
     a configuration section. The fatal error message may read
     `(mysqlnd_ms) Section [slave] doesn't exist for host [%s] in %s on
     line %d'. Note, that it is valid to use an empty slave server
     list. The error has been introduced to prevent accidently setting
     no slaves by forgetting about the `slave' setting. A master-only
     setup is still possible using an empty slave server list.

     If an empty slave list is configured and an attempt is made to
     execute a statement on a slave the plugin may emit a warning like
     `mysqlnd_ms) Couldn't find the appropriate slave connection. 0
     slaves to choose from.' upon statement execution. It is possible
     that another warning follows such as `(mysqlnd_ms) No connection
     selected by the last filter'.

  3. global_transaction_id_injection array or object

     Global transaction identifier configuration related to both the
     use of the server built-in global transaction ID feature and the
     client-side emulation.

     Unknown PHP API feature.

     Keyword Description                                     Version
     `fetch_last_gtid'SQL statement for accessing the latest global   Since 1.2.0.
             transaction identifier. The SQL statement is    
             run if the plugin needs to know the most        
             recent global transaction identifier. This can  
             be the case, for example, when checking MySQL   
             Replication slave status. Also used with *Note  
             `mysqlnd_ms_get_last_gtid':                     
             apis-php-function.mysqlnd-ms-get-last-gtid.     
     `check_for_gtid'SQL statement for checking if a replica has     Since 1.2.0.
             replicated all transactions up to and           
             including ones searched for. The SQL statement  
             is run when searching for replicas which can    
             offer a higher level of consistency than        
             eventual consistency. The statement must        
             contain a placeholder `#GTID' which is to be    
             replaced with the global transaction            
             identifier searched for by the plugin. Please,  
             check the *Note quickstart:                     
             apis-php-mysqlnd-ms.quickstart.gtid.  for       
             examples.                                       
     `report_errors'Whether to emit an error of type warning if an  Since 1.2.0.
             issue occurs while executing any of the         
             configured SQL statements.                      
     `on_commit'Client-side global transaction ID emulation     Since 1.2.0.
             only. SQL statement to run when a transaction   
             finished to update the global transaction       
             identifier sequence number on the master.       
             Please, see the *Note quickstart:               
             apis-php-mysqlnd-ms.quickstart.gtid.  for       
             examples.                                       
     `wait_for_gtid_timeout'Instructs the plugin to wait up to              Since 1.4.0.
             `wait_for_gtid_timeout' seconds for a slave to  
             catch up when searching for slaves that can     
             deliver session consistency. The setting        
             limits the time spend for polling the slave     
             status. If polling the status takes very long,  
             the total clock time spend waiting may exceed   
             `wait_for_gtid_timeout'. The plugin calls       
             `sleep(1)' to sleep one second between each     
             two polls.                                      
                                                             
             The setting can be used both with the plugins   
             client-side emulation and the server-side       
             global transaction identifier feature of MySQL  
             5.6.                                            
                                                             
             Waiting for a slave to replicate a certain      
             GTID needed for session consistency also means  
             throttling the client. By throttling the        
             client the write load on the master is reduced  
             indirectly. A primary copy based replication    
             system, such as MySQL Replication, is given     
             more time to reach a consistent state. This     
             can be desired, for example, to increase the    
             number of data copies for high availability     
             considerations or to prevent the master from    
             being overloaded.                               

  4. filters object

     List of filters. A filter is responsible to filter the list of
     available servers for executing a given statement. Filters can be
     chained. The `random' and `roundrobin' filter replace the `pick[]'
     directive used in prior version to select a load balancing policy.
     The `user' filter replaces the *Note
     `mysqlnd_ms_set_user_pick_server':
     apis-php-function.mysqlnd-ms-set-user-pick-server.  function.

     Filters may accept parameters to refine their actions.

     If no load balancing policy is set, the plugin will default to
     `random_once'. The `random_once' policy picks a random slave
     server when running the first read-only statement.  The slave
     server will be used for all read-only statements until the PHP
     script execution ends. No load balancing policy is set and thus,
     defaulting takes place, if neither the `random' nor the
     `roundrobin' are part of a configuration section.

     If a filter chain is configured so that a filter which output no
     more than once server is used as input for a filter which should
     be given more than one server as input, the plugin may emit a
     warning upon opening a connection. The warning may read:
     `(mysqlnd_ms) Error while creating filter '%s' . Non-multi filter
     '%s' already created. Stopping in %s on line %d'. Furthermore, an
     error of the error code `2000', the sql state `HY000' and an error
     message similar to the warning may be set on the connection handle.


                 {
              "myapp": {
                  "master": {
                      "master_0": {
                          "host": "localhost"
                      }
                  },
                  "slave": {
                      "slave_0": {
                          "host": "192.168.78.136",
                          "port": "3306"
                      }
                  },
                  "filters": [
                      "roundrobin",
                      "random"
                  ]
              }
          }


          <?php
          $link = new mysqli("myapp", "root", "", "test");
          printf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error());
          $link->query("SELECT 1 FROM DUAL");
          ?>

     The above example will output:


          PHP Warning:  mysqli::mysqli(): (HY000/2000): (mysqlnd_ms) Error while creating filter 'random' . Non-multi filter 'roundrobin' already created. Stopping in filter_warning.php on line 1
          [2000] (mysqlnd_ms) Error while creating filter 'random' . Non-multi filter 'roundrobin' already created. Stopping
          PHP Warning:  mysqli::query(): Couldn't fetch mysqli in filter_warning.php on line 3

  5. Filter: random object

     The `random' filter features the random and random once load
     balancing policies, set through the `pick[]' directive in older
     versions.

     The random policy will pick a random server whenever a read-only
     statement is to be executed. The random once strategy picks a
     random slave server once and continues using the slave for the
     rest of the PHP web request.  Random once is a default, if load
     balancing is not configured through a filter.

     If the `random' filter is not given any arguments, it stands for
     random load balancing policy.


          {
              "myapp": {
                  "master": {
                      "master_0": {
                          "host": "localhost"
                      }
                  },
                  "slave": {
                      "slave_0": {
                          "host": "192.168.78.136",
                          "port": "3306"
                      },
                      "slave_1": {
                          "host": "192.168.78.137",
                          "port": "3306"
                      }
                  },
                  "filters": [
                      "random"
                  ]
              }
          }

     Optionally, the `sticky' argument can be passed to the filter. If
     the parameter `sticky' is set to the string `1', the filter
     follows the random once load balancing strategy.


          {
              "filters": {
                  "random": {
                      "sticky": "1"
                  }
              }
          }

     Both the `random' and `roundrobin' filters support setting a
     priority, a weight for a server, since PECL/mysqlnd_ms 1.4.0. If
     the `weight' argument is passed to the filter, it must assign a
     weight for all servers. Servers must be given an alias name in the
     `slave' respectively `master' server lists. The alias must be used
     to reference servers for assigning a priority with `weight'.


          [E_RECOVERABLE_ERROR] mysqli_real_connect(): (mysqlnd_ms) Unknown server 'slave3' in 'random' filter configuration. Stopping in %s on line %d

     Using a wrong alias name with `weight' may result in an error
     similar to the shown above.

     If `weight' is omitted, the default weight of all servers is one.


          {
             "myapp": {
                 "master": {
                     "master1":{
                         "host":"localhost",
                         "socket":"\/var\/run\/mysql\/mysql.sock"
                     }
                 },
                 "slave": {
                     "slave1": {
                         "host":"192.168.2.28",
                         "port":3306
                     },
                     "slave2": {
                         "host":"192.168.2.29",
                         "port":3306
                     },
                     "slave3": {
                         "host":"192.0.43.10",
                         "port":3306
                     },
                 },
                 "filters": {
                     "random": {
                         "weights": {
                             "slave1":8,
                             "slave2":4,
                             "slave3":1,
                             "master1":1
                         }
                     }
                 }
             }
          }

     At the average a server assigned a weight of two will be selected
     twice as often as a server assigned a weight of one. Different
     weights can be assigned to reflect differently sized machines, to
     prefer co-located slaves which have a low network latency or, to
     configure a standby failover server. In the latter case, you may
     want to assign the standby server a very low weight in relation to
     the other servers. For example, given the configuration above
     `slave3' will get only some eight percent of the requests in the
     average.  As long as `slave1' and `slave2' are running, it will be
     used sparsely, similar to a standby failover server. Upon failure
     of `slave1' and `slave2', the usage of `slave3' increases. Please,
     check the notes on failover before using `weight' this way.

     Valid weight values range from 1 to 65535.

     Unknown arguments are ignored by the filter. No warning or error
     is given.

     The filter expects one or more servers as input. Outputs one
     server. A filter sequence such as `random', `roundrobin' may cause
     a warning and an error message to be set on the connection handle
     when executing a statement.

     List of filter arguments.

     Unknown PHP API feature.

     Keyword Description                                     Version
     `sticky'Enables or disabled random once load balancing  Since 1.2.0.
             policy. See above.                              
     `weight'Assigns a load balancing weight/priority to a   Since 1.4.0.
             server. Please, see above for a description.    

  6. Filter: roundrobin object

     If using the `roundrobin' filter, the plugin iterates over the
     list of configured slave servers to pick a server for statement
     execution. If the plugin reaches the end of the list, it wraps
     around to the beginning of the list and picks the first configured
     slave server.


                 {
              "myapp": {
                  "master": {
                      "master_0": {
                          "host": "localhost"
                      }
                  },
                  "slave": {
                      "slave_0": {
                          "host": "192.168.78.136",
                          "port": "3306"
                      }
                  },
                  "filters": [
                      "roundrobin"
                  ]
              }
          }

     Expects one or more servers as input. Outputs one server. A filter
     sequence such as `roundrobin', `random' may cause a warning and an
     error message to be set on the connection handle when executing a
     statement.

     List of filter arguments.

     Unknown PHP API feature.

     Keyword Description                                     Version
     `weight'Assigns a load balancing weight/priority to a   Since 1.4.0.
             server. Please, find a description above.       

  7. Filter: user object

     The `user' replaces *Note `mysqlnd_ms_set_user_pick_server':
     apis-php-function.mysqlnd-ms-set-user-pick-server.  function,
     which was removed in 1.1.0-beta. The filter sets a callback for
     user-defined read/write splitting and server selection.

     The plugins built-in read/write query split mechanism decisions
     can be overwritten in two ways. The easiest way is to prepend a
     query string with the SQL hints

     MYSQLND_MS_MASTER_SWITCH

     ,

     MYSQLND_MS_SLAVE_SWITCH

     or

     MYSQLND_MS_LAST_USED_SWITCH

     . Using SQL hints one can control, for example, whether a query
     shall be send to the MySQL replication master server or one of the
     slave servers. By help of SQL hints it is not possible to pick a
     certain slave server for query execution.

     Full control on server selection can be gained using a callback
     function. Use of a callback is recommended to expert users only
     because the callback has to cover all cases otherwise handled by
     the plugin.

     The plugin will invoke the callback function for selecting a
     server from the lists of configured master and slave servers. The
     callback function inspects the query to run and picks a server for
     query execution by returning the hosts URI, as found in the master
     and slave list.

     If the lazy connections are enabled and the callback chooses a
     slave server for which no connection has been established so far
     and establishing the connection to the slave fails, the plugin
     will return an error upon the next action on the failed
     connection, for example, when running a query. It is the
     responsibility of the application developer to handle the error.
     For example, the application can re-run the query to trigger a new
     server selection and callback invocation. If so, the callback must
     make sure to select a different slave, or check slave
     availability, before returning to the plugin to prevent an endless
     loop.


          {
              "myapp": {
                  "master": {
                      "master_0": {
                          "host": "localhost"
                      }
                  },
                  "slave": {
                      "slave_0": {
                          "host": "192.168.78.136",
                          "port": "3306"
                      }
                  },
                  "filters": {
                      "user": {
                          "callback": "pick_server"
                      }
                  }
              }
          }

     The callback is supposed to return a host to run the query on. The
     host URI is to be taken from the master and slave connection lists
     passed to the callback function. If callback returns a value
     neither found in the master nor in the slave connection lists the
     plugin will emit an error of the type `E_RECOVERABLE_ERROR' The
     error may read like ` (mysqlnd_ms) User filter callback has
     returned an unknown server. The server 'server that is not in
     master or slave list' can neither be found in the master list nor
     in the slave list'. If the application catches the error to ignore
     it, follow up errors may be set on the connection handle, for
     example, `(mysqlnd_ms) No connection selected by the last filter'
     with the error code `2000' and the sqlstate `HY000'. Furthermore a
     warning may be emitted.

     Referencing a non-existing function as a callback will result in
     any error of the type `E_RECOVERABLE_ERROR' whenever the plugin
     tries to callback function. The error message may reads like:
     `(mysqlnd_ms) Specified callback (pick_server) is not a valid
     callback'. If the application catches the error to ignore it,
     follow up errors may be set on the connection handle, for example,
     `(mysqlnd_ms) Specified callback (pick_server) is not a valid
     callback' with the error code `2000' and the sqlstate `HY000'.
     Furthermore a warning may be emitted.

     The following parameters are passed from the plugin to the
     callback.

     Unknown PHP API feature.

     ParameterDescription                                     Version
     `connected_host'URI of the currently connected database server. Since 1.1.0.
     `query' Query string of the statement for which a       Since 1.1.0.
             server needs to be picked.                      
     `masters'List of master servers to choose from. Note,    Since 1.1.0.
             that the list of master servers may not be      
             identical to the list of configured master      
             servers if the filter is not the first in the   
             filter chain. Previously run filters may have   
             reduced the master list already.                
     `slaves'List of slave servers to choose from. Note,     Since 1.1.0.
             that the list of master servers may not be      
             identical to the list of configured master      
             servers if the filter is not the first in the   
             filter chain. Previously run filters may have   
             reduced the master list already.                
     `last_used_connection'URI of the server of the connection used to     Since 1.1.0.
             execute the previous statement on.              
     `in_transaction'Boolean flag indicating whether the statement   Since 1.1.0.
             is part of an open transaction. If autocommit   
             mode is turned off, this will be set to         
                                                             
             TRUE                                            
                                                             
             . Otherwise it is set to                        
                                                             
             FALSE                                           
                                                             
             .                                               
                                                             
             Transaction detection is based on monitoring    
             the mysqlnd library call `set_autocommit'.      
             Monitoring is not possible before PHP 5.4.0.    
             Please, see *Note connection pooling and        
             switching: apis-php-mysqlnd-ms.pooling.         
             concepts discussion for further details.        


          {
              "myapp": {
                  "master": {
                      "master_0": {
                          "host": "localhost"
                      }
                  },
                  "slave": {
                      "slave_0": {
                          "host": "192.168.2.27",
                          "port": "3306"
                      },
                      "slave_1": {
                          "host": "192.168.78.136",
                          "port": "3306"
                      }
                  },
                  "filters": {
                      "user": {
                          "callback": "pick_server"
                      }
                  }
              }
          }


          <?php
          function pick_server($connected, $query, $masters, $slaves, $last_used_connection, $in_transaction)
          {
           static $slave_idx = 0;
           static $num_slaves = NULL;
           if (is_null($num_slaves))
            $num_slaves = count($slaves);

           /* default: fallback to the plugins build-in logic */
           $ret = NULL;

           printf("User has connected to '%s'...\n", $connected);
           printf("... deciding where to run '%s'\n", $query);

           $where = mysqlnd_ms_query_is_select($query);
           switch ($where)
           {
            case MYSQLND_MS_QUERY_USE_MASTER:
             printf("... using master\n");
             $ret = $masters[0];
             break;
            case MYSQLND_MS_QUERY_USE_SLAVE:
             /* SELECT or SQL hint for using slave */
             if (stristr($query, "FROM table_on_slave_a_only"))
             {
              /* a table which is only on the first configured slave  */
              printf("... access to table available only on slave A detected\n");
              $ret = $slaves[0];
             }
             else
             {
              /* round robin */
              printf("... some read-only query for a slave\n");
              $ret = $slaves[$slave_idx++ % $num_slaves];
             }
             break;
            case MYSQLND_MS_QUERY_LAST_USED:
             printf("... using last used server\n");
             $ret = $last_used_connection;
             break;
           }

           printf("... ret = '%s'\n", $ret);
           return $ret;
          }

          $mysqli = new mysqli("myapp", "root", "", "test");

          if (!($res = $mysqli->query("SELECT 1 FROM DUAL")))
           printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
          else
           $res->close();

          if (!($res = $mysqli->query("SELECT 2 FROM DUAL")))
           printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
          else
           $res->close();

          if (!($res = $mysqli->query("SELECT * FROM table_on_slave_a_only")))
           printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
          else
           $res->close();

          $mysqli->close();
          ?>

     The above example will output:


          User has connected to 'myapp'...
          ... deciding where to run 'SELECT 1 FROM DUAL'
          ... some read-only query for a slave
          ... ret = 'tcp://192.168.2.27:3306'
          User has connected to 'myapp'...
          ... deciding where to run 'SELECT 2 FROM DUAL'
          ... some read-only query for a slave
          ... ret = 'tcp://192.168.78.136:3306'
          User has connected to 'myapp'...
          ... deciding where to run 'SELECT * FROM table_on_slave_a_only'
          ... access to table available only on slave A detected
          ... ret = 'tcp://192.168.2.27:3306'

  8. Filter: user_multi object

     The `user_multi' differs from the `user' only in one aspect.
     Otherwise, their syntax is identical. The `user' filter must pick
     and return exactly one node for statement execution. A filter
     chain usually ends with a filter that emits only one node. The
     filter chain shall reduce the list of candidates for statement
     execution down to one. This, only one node left, is the case after
     the `user' filter has been run.

     The `user_multi' filter is a multi filter. It returns a list of
     slave and a list of master servers. This list needs further
     filtering to identify exactly one node for statement execution. A
     multi filter is typically placed at the top of the filter chain.
     The `quality_of_service' filter is another example of a multi
     filter.

     The return value of the callback set for `user_multi' must be an
     an array with two elements. The first element holds a list of
     selected master servers. The second element contains a list of
     selected slave servers. The lists shall contain the keys of the
     slave and master servers as found in the slave and master lists
     passed to the callback. The below example returns random master
     and slave lists extracted from the functions input.


          <?php
          function pick_server($connected, $query, $masters, $slaves, $last_used_connection, $in_transaction)
          {
            $picked_masters = array()
            foreach ($masters as $key => $value) {
              if (mt_rand(0, 2) > 1)
                $picked_masters[] = $key;
            }
            $picked_slaves = array()
            foreach ($slaves as $key => $value) {
              if (mt_rand(0, 2) > 1)
                $picked_slaves[] = $key;
            }
            return array($picked_masters, $picked_slaves);
          }
          ?>

     The plugin will issue an error of type `E_RECOVERABLE' if the
     callback fails to return a server list. The error may read
     `(mysqlnd_ms) User multi filter callback has not returned a list
     of servers to use. The callback must return an array in %s on line
     %d'. In case the server list is not empty but has invalid servers
     key/ids in it, an error of type `E_RECOVERABLE' will the thrown
     with an error message like `(mysqlnd_ms) User multi filter
     callback has returned an invalid list of servers to use. Server id
     is negative in %s on line %d', or similar.

     Whether an error is emitted in case of an empty slave or master
     list depends on the configuration. If an empty master list is
     returned for a write operation, it is likely that the plugin will
     emit a warning that may read `(mysqlnd_ms) Couldn't find the
     appropriate master connection. 0 masters to choose from. Something
     is wrong in %s on line %d'. Typically a follow up error of type
     `E_ERROR' will happen.  In case of a read operation and an empty
     slave list the behavior depends on the fail over configuration. If
     fail over to master is enabled, no error should appear. If fail
     over to master is deactivated the plugin will emit a warning that
     may read `(mysqlnd_ms) Couldn't find the appropriate slave
     connection. 0 slaves to choose from. Something is wrong in %s on
     line %d'.

  9. Filter: node_groups object

     The `node_groups' filter lets you group cluster nodes and query
     selected groups, for example, to support data partitioning. Data
     partitioning can be required for manual sharding, primary copy
     based clusters running multiple masters, or to avoid hot spots in
     update everywhere clusters that have no built-in partitioning. The
     filter is a multi filter which returns zero, one or multiple of
     its input servers. Thus, it must be followed by other filters to
     reduce the number of candidates down to one for statement
     execution.

     Unknown PHP API feature.

     Keyword Description                                     Version
     `user   One or more node groups must be defined. A      Since 1.5.0.
     defined node group can have an arbitrary user defined   
     node    name. The name is used in combination with a    
     group   SQL hint to restrict query execution to the     
     name'   nodes listed for the node group. To run a       
             query on any of the servers of a node group,    
             the query must begin with the SQL hint `/*user  
             defined node group name*/'. Please note, no     
             white space is allowed around `user defined     
             node group name'. Because `user defined node    
             group name' is used as-is as part of a SQL      
             hint, you should choose the name that is        
             compliant with the SQL language.                
                                                             
             Each node group entry must contain a list of    
             `master' servers. Additional `slave' servers    
             are allowed.  Failing to provide a list of      
             `master' for a node group `name_of_group' may   
             cause an error of type                          
                                                             
             E_RECOVERABLE_ERROR                             
                                                             
             like `(mysqlnd_ms) No masters configured in     
             node group 'name_of_group' for 'node_groups'    
             filter'.                                        
                                                             
             The list of master and slave servers must       
             reference corresponding entries in the global   
             master respectively slave server list.          
             Referencing an unknown server in either of the  
             both server lists may cause an                  
                                                             
             E_RECOVERABLE_ERROR                             
                                                             
             error like `(mysqlnd_ms) Unknown master         
             'server_alias_name' (section 'name_of_group')   
             in 'node_groups' filter configuration'.         
                                                             
                                                             
                   {                                         
                    "myapp": {                               
                         "master": {                         
                              "master_0": {                  
                                  "host": "localhost",       
                                  "socket": "\/tmp\/mysql.sock"
                              }                              
                          },                                 
                          "slave": {                         
                              "slave_0": {                   
                                  "host": "192.168.2.28",    
                                  "port": 3306               
                              },                             
                              "slave_1": {                   
                                  "host": "127.0.0.1",       
                                  "port": 3311               
                              }                              
                          },                                 
                          "filters": {                       
                              "node_groups": {               
                                  "Partition_A" : {          
                                      "master": ["master_0"],
                                      "slave": ["slave_0"]   
                                  }                          
                              },                             
                             "roundrobin": []                
                          }                                  
                      }                                      
                  }                                          
             Please note, if a filter chain generates an     
             empty slave list and the PHP configuration      
             directive `mysqlnd_ms.multi_master=0' is used,  
             the plugin may emit a warning.                  

 10. Filter: quality_of_service object

     The `quality_of_service' identifies cluster nodes capable of
     delivering a certain quality of service. It is a multi filter
     which returns zero, one or multiple of its input servers. Thus, it
     must be followed by other filters to reduce the number of
     candidates down to one for statement execution.

     The `quality_of_service' filter has been introduced in
     1.2.0-alpha. In the 1.2 series the filters focus is on the
     consistency aspect of service quality. Different types of clusters
     offer different default data consistencies. For example, an
     asynchronous MySQL replication slave offers eventual consistency.
     The slave may not be able to deliver requested data because it has
     not replicated the write, it may serve stale database because its
     lagging behind or it may serve current information. Often, this is
     acceptable. In some cases higher consistency levels are needed for
     the application to work correct. In those cases, the
     `quality_of_service' can filter out cluster nodes which cannot
     deliver the necessary quality of service.

     The `quality_of_service' filter can be replaced or created at
     runtime. A successful call to *Note `mysqlnd_ms_set_qos':
     apis-php-function.mysqlnd-ms-set-qos.  removes all existing `qos'
     filter entries from the filter list and installs a new one at the
     very beginning. All settings that can be made through *Note
     `mysqlnd_ms_set_qos': apis-php-function.mysqlnd-ms-set-qos.  can
     also be in the plugins configuration file. However, use of the
     function is by far the most common use case.  Instead of setting
     session consistency and strong consistency service levels in the
     plugins configuration file it is recommended to define only
     masters and no slaves. Both service levels will force the use of
     masters only. Using an empty slave list shortens the configuration
     file, thus improving readability. The only service level for which
     there is a case of defining in the plugins configuration file is
     the combination of eventual consistency and maximum slave lag.

     Unknown PHP API feature.

     Keyword Description                                     Version
     `eventual_consistency'Request eventual consistency. Allows the use    Since 1.2.0.
             of all master and slave servers. Data returned  
             may or may not be current.                      
                                                             
             Eventual consistency accepts an optional `age'  
             parameter. If `age' is given the plugin         
             considers only slaves for reading for which     
             MySQL replication reports a slave lag less or   
             equal to `age'. The replication lag is measure  
             using `SHOW SLAVE STATUS'. If the plugin fails  
             to fetch the replication lag, the slave tested  
             is skipped. Implementation details and tips are 
             given in the *Note quality of service concepts  
             section: apis-php-mysqlnd-ms.qos-consistency.   
                                                             
             Please note, if a filter chain generates an     
             empty slave list and the PHP configuration      
             directive `mysqlnd_ms.multi_master=0' is used,  
             the plugin may emit a warning.                  
                                                             
                                                             
                  {                                          
                      "myapp": {                             
                          "master": {                        
                              "master_0": {                  
                                  "host": "localhost"        
                              }                              
                          },                                 
                          "slave": {                         
                              "slave_0": {                   
                                  "host": "192.168.2.27",    
                                  "port": "3306"             
                              },                             
                              "slave_1": {                   
                                  "host": "192.168.78.136",  
                                  "port": "3306"             
                              }                              
                          },                                 
                          "filters": {                       
                              "quality_of_service": {        
                                  "eventual_consistency": {  
                                      "age":123              
                                  }                          
                              }                              
                          }                                  
                      }                                      
                  }                                          
     `session_consistency'Request session consistency (read your          Since 1.1.0.
             writes). Allows use of all masters and all      
             slaves which are in sync with the master. If    
             no further parameters are given slaves are      
             filtered out as there is no reliable way to     
             test if a slave has caught up to the master or  
             is lagging behind. Please note, if a filter     
             chain generates an empty slave list and the     
             PHP configuration directive                     
             `mysqlnd_ms.multi_master=0' is used, the        
             plugin may emit a warning.                      
                                                             
             Session consistency temporarily requested using 
             *Note `mysqlnd_ms_set_qos':                     
             apis-php-function.mysqlnd-ms-set-qos.  is a     
             valuable alternative to using                   
             `master_on_write'.  `master_on_write' is likely 
             to send more statements to the master than      
             needed. The application may be able to          
             continue operation at a lower consistency       
             level after it has done some critical reads.    
     `strong_consistency'Request strong consistency. Only masters will   Since 1.2.0.
             be used.                                        

 11. failover Up to and including 1.3.x: string. Since 1.4.0: object.

     Failover policy. Supported policies: `disabled' (default),
     `master', `loop_before_master' (Since 1.4.0).

     If no failover policy is set, the plugin will not do any automatic
     failover (`failover=disabled'). Whenever the plugin fails to
     connect a server it will emit a warning and set the connections
     error code and message.  Thereafter it is up to the application to
     handle the error and, for example, resent the last statement to
     trigger the selection of another server.

     Please note, the automatic failover logic is applied when opening
     connections only. Once a connection has been opened no automatic
     attempts are made to reopen it in case of an error. If, for
     example, the server a connection is connected to is shut down and
     the user attempts to run a statement on the connection, no
     automatic failover will be tried. Instead, an error will be
     reported.

     If using `failover=master' the plugin will implicitly failover to
     a master, if available.  Please check the concepts documentation
     to learn about potential pitfalls and risks of using
     `failover=master'.


          {
              "myapp": {
                  "master": {
                      "master_0": {
                          "host": "localhost"
                      }
                  },
                  "slave": {
                      "slave_0": {
                          "host": "192.168.78.136",
                          "port": "3306"
                      }
                  },
                  "failover": "master"
              }
          }

     Since PECL/mysqlnd_ms 1.4.0 the failover configuration keyword
     refers to an object.


          {
              "myapp": {
                  "master": {
                      "master_0": {
                          "host": "localhost"
                      }
                  },
                  "slave": {
                      "slave_0": {
                          "host": "192.168.78.136",
                          "port": "3306"
                      }
                  },
                  "failover": {"strategy": "master" }
              }
          }

     Unknown PHP API feature.

     Keyword Description                                     Version
     `strategy'Failover policy. Possible values: `disabled'    Since 1.4.0.
             (default), `master', `loop_before_master'       
                                                             
             A value of `disabled' disables automatic        
             failover.                                       
                                                             
             Setting `master' instructs the plugin to try    
             to connect to a master in case of a slave       
             connection error. If the master connection      
             attempt fails, the plugin exists the failover   
             loop and returns an error to the user.          
                                                             
             If using `loop_before_master' and a slave       
             request is made, the plugin tries to connect    
             to other slaves before failing over to a        
             master. If multiple master are given and multi  
             master is enabled, the plugin also loops over   
             the list of masters and attempts to connect     
             before returning an error to the user.          
     `remember_failed'Remember failures for the duration of a web     Since 1.4.0.
             request. Default: `false'.                      The feature
                                                             is only
             If set to `true' the plugin will remember       available
             failed hosts and skip the hosts in all future   together
             load balancing made for the duration of the     with the
             current web request.                            `random' and
                                                             `roundrobin'
                                                             load
                                                             balancing
                                                             filter. Use
                                                             of the
                                                             setting is
                                                             recommended.
     `max_retries'Maximum number of connection attempts before    Since 1.4.0.
             skipping host. Default: `0' (no limit).         The feature
                                                             is only
             The setting is used to prevent hosts from       available
             being dropped of the host list upon the first   together
             failure. If set to `n > 0', the plugin will     with the
             keep the node in the node list even after a     `random' and
             failed connection attempt. The node will not    `roundrobin'
             be removed immediately from the slave           load
             respectively master lists after the first       balancing
             connection failure but instead be tried to      filter.
             connect to up to `n' times in future load       
             balancing rounds before being removed.          

     Setting `failover' to any other value but `disabled', `master' or
     `loop_before_master' will not emit any warning or error.

 12. lazy_connections bool

     Controls the use of lazy connections. Lazy connections are
     connections which are not opened before the client sends the first
     connection. Lazy connections are a default.

     It is strongly recommended to use lazy connections. Lazy
     connections help to keep the number of open connections low. If
     you disable lazy connections and, for example, configure one MySQL
     replication master server and two MySQL replication slaves, the
     plugin will open three connections upon the first call to a
     connect function although the application might use the master
     connection only.

     Lazy connections bare a risk if you make heavy use of actions
     which change the state of a connection. The plugin does not
     dispatch all state changing actions to all connections from the
     connection pool. The few dispatched actions are applied to already
     opened connections only. Lazy connections opened in the future are
     not affected. Only some settings are "remembered" and applied when
     lazy connections are opened.


          {
              "myapp": {
                  "master": {
                      "master_0": {
                          "host": "localhost"
                      }
                  },
                  "slave": {
                      "slave_0": {
                          "host": "192.168.78.136",
                          "port": "3306"
                      }
                  },
                  "lazy_connections": 0
              }
          }

     Please, see also `server_charset' to overcome potential problems
     with string escaping and servers using different default charsets.

 13. server_charset string

     The setting has been introduced in 1.4.0. It is recommended to set
     it if using lazy connections.

     The `server_charset' setting serves two purposes. It acts as a
     fallback charset to be used for string escaping done before a
     connection has been established and it helps to avoid escaping
     pitfalls in heterogeneous environments which servers using
     different default charsets.

     String escaping takes a connections charset into account. String
     escaping is not possible before a connection has been opened and
     the connections charset is known. The use of lazy connections
     delays the actual opening of connections until a statement is send.

     An application using lazy connections may attempt to escape a
     string before sending a statement. In fact, this should be a
     common case as the statement string may contain the string that is
     to be escaped. However, due to the lazy connection feature no
     connection has been opened yet and escaping fails. The plugin may
     report an error of the type `E_WARNING' and a message like
     `(mysqlnd_ms) string escaping doesn't work without established
     connection.  Possible solution is to add server_charset to your
     configuration' to inform you of the pitfall.

     Setting `server_charset' makes the plugin use the given charset
     for string escaping done on lazy connection handles before
     establishing a network connection to MySQL. Furthermore, the
     plugin will enforce the use of the charset when the connection is
     established.

     Enforcing the use of the configured charset used for escaping is
     done to prevent tapping into the pitfall of using a different
     charset for escaping than used later for the connection. This has
     the additional benefit of removing the need to align the charset
     configuration of all servers used. No matter what the default
     charset on any of the servers is, the plugin will set the
     configured one as a default.

     The plugin does not stop the user from changing the charset at any
     time using the `set_charset' (http://www.php.net/set_charset) call
     or corresponding SQL statements. Please, note that the use of SQL
     is not recommended as it cannot be monitored by the plugin. The
     user can, for example, change the charset on a lazy connection
     handle after escaping a string and before the actual connection is
     opened. The charset set by the user will be used for any
     subsequent escaping before the connection is established. The
     connection will be established using the configured charset, no
     matter what the server charset is or what the user has set before.
     Once a connection has been opened, `set_charset' is of no meaning
     anymore.


          {
              "myapp": {
                  "master": {
                      "master_0": {
                          "host": "localhost"
                      }
                  },
                  "slave": {
                      "slave_0": {
                          "host": "192.168.78.136",
                          "port": "3306"
                      }
                  },
                  "lazy_connections": 1,
                  "server_charset" : "utf8"
              }
          }


          <?php
          $mysqli = new mysqli("myapp", "username", "password", "database");
          $mysqli->real_escape("this will be escaped using the server_charset setting - utf8");
          $mysqli->set_charset("latin1");
          $mysqli->real_escape("this will be escaped using latin1");
          /* server_charset implicitly set - utf8 connection */
          $mysqli->query("SELECT 'This connection will be set to server_charset upon establishing' AS _msg FROM DUAL");
          /* latin1 used from now on */
          $mysqli->set_charset("latin1");
          ?>

 14. master_on_write bool

     If set, the plugin will use the master server only after the first
     statement has been executed on the master.  Applications can still
     send statements to the slaves using SQL hints to overrule the
     automatic decision.

     The setting may help with replication lag. If an application runs
     an `INSERT' the plugin will, by default, use the master to execute
     all following statements, including `SELECT' statements. This
     helps to avoid problems with reads from slaves which have not
     replicated the `INSERT' yet.


          {
              "myapp": {
                  "master": {
                      "master_0": {
                          "host": "localhost"
                      }
                  },
                  "slave": {
                      "slave_0": {
                          "host": "192.168.78.136",
                          "port": "3306"
                      }
                  },
                  "master_on_write": 1
              }
          }

     Please, note the `quality_of_service' filter introduced in version
     1.2.0-alpha. It gives finer control, for example, for achieving
     read-your-writes and, it offers additional functionality
     introducing *Note service levels:
     apis-php-mysqlnd-ms.qos-consistency.

     All transaction stickiness settings, including
     `trx_stickiness=on', are overruled by `master_on_write=1'.

 15. trx_stickiness string

     Transaction stickiness policy. Supported policies: `disabled'
     (default), `master'.

     The setting requires 5.4.0 or newer. If used with PHP older than
     5.4.0, the plugin will emit a warning like `(mysqlnd_ms)
     trx_stickiness strategy is not supported before PHP 5.3.99'.

     If no transaction stickiness policy is set or, if setting
     `trx_stickiness=disabled', the plugin is not transaction aware.
     Thus, the plugin may load balance connections and switch
     connections in the middle of a transaction. The plugin is not
     transaction safe. SQL hints must be used avoid connection switches
     during a transaction.

     As of PHP 5.4.0 the mysqlnd library allows the plugin to monitor
     the `autocommit' mode set by calls to the libraries
     `set_autocommit()' function. If setting `set_stickiness=master' and
     `autocommit' gets disabled by a PHP MySQL extension invoking the
     `mysqlnd' library internal function call `set_autocommit()', the
     plugin is made aware of the begin of a transaction. Then, the
     plugin stops load balancing and directs all statements to the
     master server until `autocommit' is enabled. Thus, no SQL hints
     are required.

     An example of a PHP MySQL API function calling the `mysqlnd'
     library internal function call `set_autocommit()' is
     `mysqli_autocommit'.

     Although setting `trx_stickiness=master', the plugin cannot be
     made aware of `autocommit' mode changes caused by SQL statements
     such as `SET AUTOCOMMIT=0' or `BEGIN'.

     As of PHP 5.5.0, the mysqlnd library features additional C API
     calls to control transactions. The level of control matches the
     one offered by SQL statements. The `mysqli' API has been modified
     to use these calls. Since version 1.5.0, PECL/mysqlnd_ms can
     monitor not only `mysqli_autocommit', but also `mysqli_begin'
     (http://www.php.net/mysqli_begin), `mysqli_commit' and
     `mysqli_rollback' to detect transaction boundaries and stop load
     balancing for the duration of a transaction.


          {
              "myapp": {
                  "master": {
                      "master_0": {
                          "host": "localhost"
                      }
                  },
                  "slave": {
                      "slave_0": {
                          "host": "192.168.78.136",
                          "port": "3306"
                      }
                  },
                  "trx_stickiness": "master"
              }
          }

     Since version 1.5.0 automatic and silent failover is disabled for
     the duration of a transaction. If the boundaries of a transaction
     have been properly detected, transaction stickiness is enabled and
     a server fails, the plugin will not attempt to fail over to the
     next server, if any, regardless of the failover policy configured.
     The user must handle the error manually.  Depending on the
     configuration, the plugin may emit an error of type `E_WARNING'
     reading like `(mysqlnd_ms) Automatic failover is not permitted in
     the middle of a transaction'. This error may then be overwritten
     by follow up errors such as `(mysqlnd_ms) No connection selected
     by the last filter'. Those errors will be generated by the failing
     query function.


          <?php
          /* assumption: automatic failover configured */
          $mysqli = new mysqli("myapp", "username", "password", "database");

          /* sets plugin internal state in_trx = 1 */
          $mysqli->autocommit(false);

          /* assumption: server fails */
          if (!($res = $mysqli->query("SELECT 'Assume this query fails' AS _msg FROM DUAL"))) {
           /* handle failure of transaction, plugin internal state is still in_trx = 1 */
           printf("[%d] %s", $mysqli->errno, $mysqli->error);
           /*
            If using autocommit() based transaction detection it is a
            MUST to call autocommit(true). Otherwise the plugin assumes
            the current transaction continues and connection
            changes remain forbidden.
           */
           $mysqli->autocommit(true);
           /* Likewise, you'll want to start a new transaction */
           $mysqli->autocommit(false);
          }
          /* latin1 used from now on */
          $mysqli->set_charset("latin1");
          ?>

     If a server fails in the middle of a transaction the plugin
     continues to refuse to switch connections until the current
     transaction has been finished. Recall that the plugin monitors API
     calls to detect transaction boundaries. Thus, you have to, for
     example, enable auto commit mode to end the current transaction
     before the plugin continues load balancing and switches the server.
     Likewise, you will want to start a new transaction immediately
     thereafter and disable auto commit mode again.

     Not handling failed queries and not ending a failed transaction
     using API calls may cause all following commands emit errors such
     as `Commands out of sync; you can't run this command now'.  Thus,
     it is important to handle all errors.

 16. transient_error object

     The setting has been introduced in 1.6.0.

     A database cluster node may reply a transient error to a client.
     The client can then repeat the operation on the same node, fail
     over to a different node or abort the operation. Per definition is
     it safe for a client to retry the same operation on the same node
     before giving up.

     `PECL/mysqlnd_ms' can perform the retry loop on behalf of the
     application. By configuring `transient_error' the plugin can be
     instructed to repeat operations failing with a certain error code
     for a certain maximum number of times with a pause between the
     retries. If the transient error disappears during loop execution,
     it is hidden from the application. Otherwise, the error is
     forwarded to the application by the end of the loop.


          {
              "myapp": {
                  "master": {
                      "master_0": {
                          "host": "localhost"
                      }
                  },
                  "slave": {
                      "slave_0": {
                          "host": "192.168.78.136",
                          "port": "3306"
                      }
                 },
                 "transient_error": {
                    "mysql_error_codes": [
                      1297
                    ],
                    "max_retries": 2,
                    "usleep_retry": 100
                 }
              }
          }

     Unknown PHP API feature.

     Keyword Description                                     Version
     `mysql_error_codes'List of transient error codes. You may add any  Since 1.6.0.
             MySQL error code to the list. It is possible    
             to consider any error as transient not only     
             `1297' (`HY000 (ER_GET_TEMPORARY_ERRMSG),       
             Message: Got temporary error %d '%s' from       
             %s'). Before adding other codes but `1297' to   
             the list, make sure your cluster supports a     
             new attempt without impacting the state of      
             your application.                               
     `max_retries'How often to retry an operation which fails     Since 1.6.0.
             with a transient error before forwarding the    
             failure to the user.                            
                                                             
             Default: `1'                                    
     `usleep_retry'Milliseconds to sleep between transient error   Since 1.6.0.
             retries. The value is passed to the C function  
             `usleep' (http://www.php.net/usleep), hence     
             the name.                                       
                                                             
             Default: `100'                                  


File: manual.info,  Node: apis-php-mysqlnd-ms.plugin-ini-v1,  Next: apis-php-mysqlnd-ms.testing,  Prev: apis-php-mysqlnd-ms.plugin-ini-json,  Up: apis-php-mysqlnd-ms.setup

22.9.2.34 Plugin configuration file (<= 1.0.x)
..............................................

Copyright 1997-2012 the PHP Documentation Group.

*Note*:

The below description applies to PECL/mysqlnd_ms < 1.1.0-beta. It is
not valid for later versions.

The plugin is using its own configuration file. The configuration file
holds information on the MySQL replication master server, the MySQL
replication slave servers, the server pick (load balancing) policy, the
failover strategy and the use of lazy connections.

The PHP configuration directive `mysqlnd_ms.ini_file' is used to set
the plugins configuration file.

The configuration file mimics standard the `php.ini' format. It
consists of one or more sections. Every section defines its own unit of
settings. There is no global section for setting defaults.

Applications reference sections by their name. Applications use section
names as the host (server) parameter to the various connect methods of
the mysqli, mysql and See section "apis-php-ref.pdo-mysql" in the
online manual extensions.  Upon connect the See section
"apis-php-mysqli" in the online manual plugin compares the hostname
with all section names from the plugin configuration file. If hostname
and section name match, the plugin will load the sections settings.


     [myapp]
     master[] = localhost
     slave[] = 192.168.2.27
     slave[] = 192.168.2.28:3306
     [localhost]
     master[] = localhost:/tmp/mysql/mysql.sock
     slave[] = 192.168.3.24:3305
     slave[] = 192.168.3.65:3309


     <?php
     /* All of the following connections will be load balanced */
     $mysqli = new mysqli("myapp", "username", "password", "database");
     $pdo = new PDO('mysql:host=myapp;dbname=database', 'username', 'password');
     $mysql = mysql_connect("myapp", "username", "password");

     $mysqli = new mysqli("localhost", "username", "password", "database");
     ?>

Section names are strings. It is valid to use a section name such as
`192.168.2.1', `127.0.0.1' or `localhost'.  If, for example, an
application connects to `localhost' and a plugin configuration section
`[localhost]' exists, the semantics of the connect operation are
changed. The application will no longer only use the MySQL server
running on the host `localhost' but the plugin will start to load
balance MySQL queries following the rules from the `[localhost]'
configuration section. This way you can load balance queries from an
application without changing the applications source code.

The `master[]', `slave[]' and `pick[]' configuration directives use a
list-like syntax. Configuration directives supporting list-like syntax
may appear multiple times in a configuration section. The plugin
maintains the order in which entries appear when interpreting them. For
example, the below example shows two `slave[]' configuration directives
in the configuration section `[myapp]'. If doing round-robin load
balancing for read-only queries, the plugin will send the first
read-only query to the MySQL server `mysql_slave_1' because it is the
first in the list. The second read-only query will be send to the MySQL
server `mysql_slave_2' because it is the second in the list.
Configuration directives supporting list-like syntax result are ordered
from top to bottom in accordance to their appearance within a
configuration section.


     [myapp]
     master[] = mysql_master_server
     slave[] = mysql_slave_1
     slave[] = mysql_slave_2

Here is a short explanation of the configuration directives that can be
used.

  1. master[] string

     URI of a MySQL replication master server. The URI follows the
     syntax `hostname[:port|unix_domain_socket]'.

     The plugin supports using only one master server.

     Setting a master server is mandatory. The plugin will report a
     warning upon connect if the user has failed to provide a master
     server for a configuration section. The warning may read
     `(mysqlnd_ms) Cannot find master section in config'. Furthermore
     the plugin may set an error code for the connection handle such as
     `HY000/2000 (CR_UNKNOWN_ERROR)'. The corresponding error message
     depends on your language settings.

  2. slave[] string

     URI of one or more MySQL replication slave servers. The URI
     follows the syntax `hostname[:port|unix_domain_socket]'.

     The plugin supports using one or more slave servers.

     Setting a slave server is mandatory. The plugin will report a
     warning upon connect if the user has failed to provide at least
     one slave server for a configuration section. The warning may read
     `(mysqlnd_ms) Cannot find slaves section in config'.  Furthermore
     the plugin may set an error code for the connection handle such as
     `HY000/2000 (CR_UNKNOWN_ERROR)'. The corresponding error message
     depends on your language settings.

  3. pick[] string

     Load balancing (server picking) policy. Supported policies:
     `random', `random_once' (default), `roundrobin', `user'.

     If no load balancing policy is set, the plugin will default to
     `random_once'. The `random_once' policy picks a random slave
     server when running the first read-only statement.  The slave
     server will be used for all read-only statements until the PHP
     script execution ends.

     The `random' policy will pick a random server whenever a read-only
     statement is to be executed.

     If using `roundrobin' the plugin iterates over the list of
     configured slave servers to pick a server for statement execution.
     If the plugin reaches the end of the list, it wraps around to the
     beginning of the list and picks the first configured slave server.

     Setting more than one load balancing policy for a configuration
     section makes only sense in conjunction with `user' and *Note
     `mysqlnd_ms_set_user_pick_server':
     apis-php-function.mysqlnd-ms-set-user-pick-server.  If the user
     defined callback fails to pick a server, the plugin falls back to
     the second configured load balancing policy.

  4. failover string

     Failover policy. Supported policies: `disabled' (default),
     `master'.

     If no failover policy is set, the plugin will not do any automatic
     failover (`failover=disabled'). Whenever the plugin fails to
     connect a server it will emit a warning and set the connections
     error code and message.  Thereafter it is up to the application to
     handle the error and, for example, resent the last statement to
     trigger the selection of another server.

     If using `failover=master' the plugin will implicitly failover to
     a slave, if available.  Please check the concepts documentation to
     learn about potential pitfalls and risks of using
     `failover=master'.

  5. lazy_connections bool

     Controls the use of lazy connections. Lazy connections are
     connections which are not opened before the client sends the first
     connection.

     It is strongly recommended to use lazy connections. Lazy
     connections help to keep the number of open connections low. If
     you disable lazy connections and, for example, configure one MySQL
     replication master server and two MySQL replication slaves, the
     plugin will open three connections upon the first call to a
     connect function although the application might use the master
     connection only.

     Lazy connections bare a risk if you make heavy use of actions
     which change the state of a connection. The plugin does not
     dispatch all state changing actions to all connections from the
     connection pool. The few dispatched actions are applied to already
     opened connections only. Lazy connections opened in the future are
     not affected. If, for example, the connection character set is
     changed using a PHP MySQL API call, the plugin will change the
     character set of all currently opened connection. It will not
     remember the character set change to apply it on lazy connections
     opened in the future. As a result the internal connection pool
     would hold connections using different character sets. This is not
     desired. Remember that character sets are taken into account for
     escaping.

  6. master_on_write bool

     If set, the plugin will use the master server only after the first
     statement has been executed on the master.  Applications can still
     send statements to the slaves using SQL hints to overrule the
     automatic decision.

     The setting may help with replication lag. If an application runs
     an `INSERT' the plugin will, by default, use the master to execute
     all following statements, including `SELECT' statements. This
     helps to avoid problems with reads from slaves which have not
     replicated the `INSERT' yet.

  7. trx_stickiness string

     Transaction stickiness policy. Supported policies: `disabled'
     (default), `master'.

     Experimental feature.

     The setting requires 5.4.0 or newer. If used with PHP older than
     5.4.0, the plugin will emit a warning like `(mysqlnd_ms)
     trx_stickiness strategy is not supported before PHP 5.3.99'.

     If no transaction stickiness policy is set or, if setting
     `trx_stickiness=disabled', the plugin is not transaction aware.
     Thus, the plugin may load balance connections and switch
     connections in the middle of a transaction. The plugin is not
     transaction safe. SQL hints must be used avoid connection switches
     during a transaction.

     As of PHP 5.4.0 the mysqlnd library allows the plugin to monitor
     the `autocommit' mode set by calls to the libraries
     `trx_autocommit()' function. If setting `trx_stickiness=master' and
     `autocommit' gets disabled by a PHP MySQL extension invoking the
     `mysqlnd' library internal function call `trx_autocommit()', the
     plugin is made aware of the begin of a transaction. Then, the
     plugin stops load balancing and directs all statements to the
     master server until `autocommit' is enabled. Thus, no SQL hints
     are required.

     An example of a PHP MySQL API function calling the `mysqlnd'
     library internal function call `trx_autocommit()' is
     `mysqli_autocommit'.

     Although setting `trx_stickiness=master', the plugin cannot be
     made aware of `autocommit' mode changes caused by SQL statements
     such as `SET AUTOCOMMIT=0'.


File: manual.info,  Node: apis-php-mysqlnd-ms.testing,  Next: apis-php-mysqlnd-ms.debugging,  Prev: apis-php-mysqlnd-ms.plugin-ini-v1,  Up: apis-php-mysqlnd-ms.setup

22.9.2.35 Testing
.................

Copyright 1997-2012 the PHP Documentation Group.

*Note*:

The section applies to mysqlnd_ms 1.1.0 or newer, not the 1.0 series.

The PECL/mysqlnd_ms test suite is in the `tests/' directory of the
source distribution. The test suite consists of standard phpt tests,
which are described on the PHP Quality Assurance Teams website.

Running the tests requires setting up one to four MySQL servers.  Some
tests don't connect to MySQL at all. Others require one server for
testing. Some require two distinct servers. In some cases two servers
are used to emulate a replication setup.  In other cases a master and a
slave of an existing MySQL replication setup are required for testing.
The tests will try to detect how many servers and what kind of servers
are given.  If the required servers are not found, the test will be
skipped automatically.

Before running the tests, edit `tests/config.inc' to configure the MySQL
servers to be used for testing.

The most basic configuration is as follows.


      putenv("MYSQL_TEST_HOST=localhost");
      putenv("MYSQL_TEST_PORT=3306");
      putenv("MYSQL_TEST_USER=root");
      putenv("MYSQL_TEST_PASSWD=");
      putenv("MYSQL_TEST_DB=test");
      putenv("MYSQL_TEST_ENGINE=MyISAM");
      putenv("MYSQL_TEST_SOCKET=");

      putenv("MYSQL_TEST_SKIP_CONNECT_FAILURE=1");
      putenv("MYSQL_TEST_CONNECT_FLAGS=0");
      putenv("MYSQL_TEST_EXPERIMENTAL=0");

      /* replication cluster emulation */
      putenv("MYSQL_TEST_EMULATED_MASTER_HOST=". getenv("MYSQL_TEST_HOST"));
      putenv("MYSQL_TEST_EMULATED_SLAVE_HOST=". getenv("MYSQL_TEST_HOST"));

      /* real replication cluster */
      putenv("MYSQL_TEST_MASTER_HOST=". getenv("MYSQL_TEST_EMULATED_MASTER_HOST"));
      putenv("MYSQL_TEST_SLAVE_HOST=". getenv("MYSQL_TEST_EMULATED_SLAVE_HOST"));

`MYSQL_TEST_HOST', `MYSQL_TEST_PORT' and `MYSQL_TEST_SOCKET' define the
hostname, TCP/IP port and Unix domain socket of the default database
server.  `MYSQL_TEST_USER' and `MYSQL_TEST_PASSWD' contain the user and
password needed to connect to the database/schema configured with
`MYSQL_TEST_DB'. All configured servers must have the same database
user configured to give access to the test database.

Using `host', `host:port' or `host:/path/to/socket' syntax one can set
an alternate host, host and port or host and socket for any of the
servers.


     putenv("MYSQL_TEST_SLAVE_HOST=192.168.78.136:3307"));
     putenv("MYSQL_TEST_MASTER_HOST=myserver_hostname:/path/to/socket"));


File: manual.info,  Node: apis-php-mysqlnd-ms.debugging,  Next: apis-php-mysqlnd-ms.monitoring,  Prev: apis-php-mysqlnd-ms.testing,  Up: apis-php-mysqlnd-ms.setup

22.9.2.36 Debugging and Tracing
...............................

Copyright 1997-2012 the PHP Documentation Group.

The mysqlnd debug log can be used to debug and trace the actitivities
of PECL/mysqlnd_ms. As a mysqlnd PECL/mysqlnd_ms adds trace information
to the mysqlnd library debug file.  Please, see the `mysqlnd.debug' PHP
configuration directive documentation for a detailed description on how
to configure the debug log.

Configuration setting example to activate the debug log:


     mysqlnd.debug=d:t:x:O,/tmp/mysqlnd.trace

*Note*:

This feature is only available with a debug build of PHP.  Works on
Microsoft Windows if using a debug build of PHP and PHP was built using
Microsoft Visual C version 9 and above.

The debug log shows mysqlnd library and PECL/mysqlnd_ms plugin function
calls, similar to a trace log. Mysqlnd library calls are usually
prefixed with `mysqlnd_'.  PECL/mysqlnd internal calls begin with
`mysqlnd_ms'.

Example excerpt from the debug log (connect):


     [...]
     >mysqlnd_connect
     | info : host=myapp user=root db=test port=3306 flags=131072
     | >mysqlnd_ms::connect
     | | >mysqlnd_ms_config_json_section_exists
     | | | info : section=[myapp] len=[5]
     | | | >mysqlnd_ms_config_json_sub_section_exists
     | | | | info : section=[myapp] len=[5]
     | | | | info : ret=1
     | | | <mysqlnd_ms_config_json_sub_section_exists
     | | | info : ret=1
     | | <mysqlnd_ms_config_json_section_exists
     [...]

The debug log is not only useful for plugin developers but also to find
the cause of user errors. For example, if your application does not do
proper error handling and fails to record error messages, checking the
debug and trace log may help finding the cause. Use of the debug log to
debug application issues should be considered only if no other option is
available. Writing the debug log to disk is a slow operation and may
have negative impact on the application performance.

Example excerpt from the debug log (connection failure):


     [...]
     | | | | | | | info : adding error [Access denied for user 'root'@'localhost' (using password: YES)] to the list
     | | | | | | | info : PACKET_FREE(0)
     | | | | | | | info : PACKET_FREE(0x7f3ef6323f50)
     | | | | | | | info : PACKET_FREE(0x7f3ef6324080)
     | | | | | | <mysqlnd_auth_handshake
     | | | | | | info : switch_to_auth_protocol=n/a
     | | | | | | info : conn->error_info.error_no = 1045
     | | | | | <mysqlnd_connect_run_authentication
     | | | | | info : PACKET_FREE(0x7f3ef63236d8)
     | | | | | >mysqlnd_conn::free_contents
     | | | | | | >mysqlnd_net::free_contents
     | | | | | | <mysqlnd_net::free_contents
     | | | | | | info : Freeing memory of members
     | | | | | | info : scheme=unix:///tmp/mysql.sock
     | | | | | | >mysqlnd_error_list_pdtor
     | | | | | | <mysqlnd_error_list_pdtor
     | | | | | <mysqlnd_conn::free_contents
     | | | | <mysqlnd_conn::connect
     [...]

The trace log can also be used to verify correct behaviour of
PECL/mysqlnd_ms itself, for example, to check which server has been
selected for query execution and why.

Example excerpt from the debug log (plugin decision):


     [...]
     >mysqlnd_ms::query
     | info : query=DROP TABLE IF EXISTS test
     | >_mysqlnd_plugin_get_plugin_connection_data
     | | info : plugin_id=5
     | <_mysqlnd_plugin_get_plugin_connection_data
     | >mysqlnd_ms_pick_server_ex
     | | info : conn_data=0x7fb6a7d3e5a0 *conn_data=0x7fb6a7d410d0
     | | >mysqlnd_ms_select_servers_all
     | | <mysqlnd_ms_select_servers_all
     | | >mysqlnd_ms_choose_connection_rr
     | | | >mysqlnd_ms_query_is_select
     [...]
     | | | <mysqlnd_ms_query_is_select
     [...]
     | | | info : Init the master context
     | | | info : list(0x7fb6a7d3f598) has 1
     | | | info : Using master connection
     | | | >mysqlnd_ms_advanced_connect
     | | | | >mysqlnd_conn::connect
     | | | | | info : host=localhost user=root db=test port=3306 flags=131072 persistent=0 state=0

In this case the statement `DROP TABLE IF EXISTS test' has been
executed. Note that the statement string is shown in the log file. You
may want to take measures to restrict access to the log for security
considerations.

The statement has been load balanced using round robin policy, as you
can easily guess from the functions name
`>mysqlnd_ms_choose_connection_rr'. It has been sent to a master server
running on `host=localhost user=root db=test port=3306 flags=131072
persistent=0 state=0'.


File: manual.info,  Node: apis-php-mysqlnd-ms.monitoring,  Prev: apis-php-mysqlnd-ms.debugging,  Up: apis-php-mysqlnd-ms.setup

22.9.2.37 Monitoring
....................

Copyright 1997-2012 the PHP Documentation Group.

Plugin activity can be monitored using the mysqlnd trace log, mysqlnd
statistics, mysqlnd_ms plugin statistics and external PHP debugging
tools. Use of the trace log should be limited to debugging. It is
recommended to use the plugins statistics for monitoring.

Writing a trace log is a slow operation. If using an external PHP
debugging tool, please refer to the vendors manual about its
performance impact and the type of information collected. In many
cases, external debugging tools will provide call stacks.  Often, a
call stack or a trace log is more difficult to interpret than the
statistics provided by the plugin.

Plugin statistics tell how often which kind of cluster node has been
used (slave or master), why the node was used, if lazy connections have
been used and if global transaction ID injection has been performed.
The monitoring information provided enables user to verify plugin
decisions and to plan their cluster resources based on usage pattern.
The function *Note `mysqlnd_ms_get_stats':
apis-php-function.mysqlnd-ms-get-stats.  is used to access the
statistics. Please, see the functions description for a list of
available statistics.

Statistics are collected on a per PHP process basis. Their scope is a
PHP process. Depending on the PHP deployment model a process may serve
one or multiple web requests. If using CGI model, a PHP process serves
one web request. If using FastCGI or pre-fork web server models, a PHP
process usually serves multiple web requests. The same is the case with
a threaded web server. Please, note that threads running in parallel
can update the statistics in parallel. Thus, if using a threaded PHP
deployment model, statistics can be changed by more than one script at
a time. A script cannot rely on the fact that it sees only its own
changes to statistics.


     mysqlnd_ms.enable=1
     mysqlnd_ms.collect_statistics=1


     <?php
     /* Load balanced following "myapp" section rules from the plugins config file (not shown) */
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (mysqli_connect_errno())
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     $stats_before = mysqlnd_ms_get_stats();
     if ($res = $mysqli->query("SELECT 'Read request' FROM DUAL")) {
       var_dump($res->fetch_all());
     }
     $stats_after = mysqlnd_ms_get_stats();
     if ($stats_after['use_slave'] <= $stats_before['use_slave']) {
       echo "According to the statistics the read request has not been run on a slave!";
     }
     ?>

Statistics are aggregated for all plugin activities and all connections
handled by the plugin. It is not possible to tell how much a certain
connection handle has contributed to the overall statistics.

Utilizing PHPs `register_shutdown_function'
(http://www.php.net/register_shutdown_function) function or the
`auto_append_file' PHP configuration directive it is easily possible to
dump statistics into, for example, a log file when a script finishes.
Instead of using a log file it is also possible to send the statistics
to an external monitoring tool for recording and display.


     mysqlnd_ms.enable=1
     mysqlnd_ms.collect_statistics=1
     error_log=/tmp/php_errors.log


     <?php
     function check_stats() {
       $msg = str_repeat("-", 80) . "\n";
       $msg .= var_export(mysqlnd_ms_get_stats(), true) . "\n";
       $msg .= str_repeat("-", 80) . "\n";
       error_log($msg);
     }
     register_shutdown_function("check_stats");
     ?>


File: manual.info,  Node: apis-php-mysqlnd-ms.constants,  Next: apis-php-ref.mysqlnd-ms,  Prev: apis-php-mysqlnd-ms.setup,  Up: apis-php-book.mysqlnd-ms

22.9.2.38 Predefined Constants
..............................

Copyright 1997-2012 the PHP Documentation Group.

The constants below are defined by this extension, and will only be
available when the extension has either been compiled into PHP or
dynamically loaded at runtime.

_SQL hint related_

The mysqlnd replication and load balancing plugin (`mysqlnd_ms')
performs read/write splitting.  This directs write queries to a MySQL
master server, and read-only queries to the MySQL slave servers. The
plugin has a built-in read/write split logic. All queries which start
with `SELECT' are considered read-only queries, which are then sent to
a MySQL slave server that is listed in the plugin configuration file.
All other queries are directed to the MySQL master server that is also
specified in the plugin configuration file.

User supplied SQL hints can be used to overrule automatic read/write
splitting, to gain full control on the process. SQL hints are standards
compliant SQL comments. The plugin will scan the beginning of a query
string for an SQL comment for certain commands, which then control
query redirection. Other systems involved in the query processing are
unaffected by the SQL hints because other systems will ignore the SQL
comments.

The plugin supports three SQL hints to direct queries to either the
MySQL slave servers, the MySQL master server, or the last used MySQL
server. SQL hints must be placed at the beginning of a query to be
recognized by the plugin.

For better portability, it is recommended to use the string constants

MYSQLND_MS_MASTER_SWITCH

,

MYSQLND_MS_SLAVE_SWITCH

and

MYSQLND_MS_LAST_USED_SWITCH

instead of their literal values.


     <?php
     /* Use constants for maximum portability */
     $master_query = "/*" . MYSQLND_MS_MASTER_SWITCH . "*/SELECT id FROM test";

     /* Valid but less portable: using literal instead of constant */
     $slave_query = "/*ms=slave*/SHOW TABLES";

     printf("master_query = '%s'\n", $master_query);
     printf("slave_query = '%s'\n", $slave_query);
     ?>

The above examples will output:


     master_query = /*ms=master*/SELECT id FROM test
     slave_query = /*ms=slave*/SHOW TABLES

  1. MYSQLND_MS_MASTER_SWITCH

     (string)

     SQL hint used to send a query to the MySQL replication master
     server.

  2. MYSQLND_MS_SLAVE_SWITCH

     (string)

     SQL hint used to send a query to one of the MySQL replication
     slave servers.

  3. MYSQLND_MS_LAST_USED_SWITCH

     (string)

     SQL hint used to send a query to the last used MySQL server. The
     last used MySQL server can either be a master or a slave server in
     a MySQL replication setup.

*Note `mysqlnd_ms_query_is_select':
apis-php-function.mysqlnd-ms-query-is-select.  related

  1. MYSQLND_MS_QUERY_USE_MASTER

     (integer)

     If `mysqlnd_ms_is_select'
     (http://www.php.net/mysqlnd_ms_is_select) returns
     MYSQLND_MS_QUERY_USE_MASTER for a given query, the built-in
     read/write split mechanism recommends sending the query to a MySQL
     replication master server.

  2. MYSQLND_MS_QUERY_USE_SLAVE

     (integer)

     If `mysqlnd_ms_is_select'
     (http://www.php.net/mysqlnd_ms_is_select) returns
     MYSQLND_MS_QUERY_USE_SLAVE for a given query, the built-in
     read/write split mechanism recommends sending the query to a MySQL
     replication slave server.

  3. MYSQLND_MS_QUERY_USE_LAST_USED

     (integer)

     If `mysqlnd_ms_is_select'
     (http://www.php.net/mysqlnd_ms_is_select) returns
     MYSQLND_MS_QUERY_USE_LAST_USED for a given query, the built-in
     read/write split mechanism recommends sending the query to the
     last used server.

*Note `mysqlnd_ms_set_qos': apis-php-function.mysqlnd-ms-set-qos,
quality of service filter and service level related

  1. MYSQLND_MS_QOS_CONSISTENCY_EVENTUAL

     (integer)

     Use to request the service level eventual consistency from the
     *Note `mysqlnd_ms_set_qos': apis-php-function.mysqlnd-ms-set-qos.
     Eventual consistency is the default quality of service when
     reading from an asynchronous MySQL replication slave. Data
     returned in this service level may or may not be stale, depending
     on whether the selected slaves happen to have replicated the
     latest changes from the MySQL replication master or not.

  2. MYSQLND_MS_QOS_CONSISTENCY_SESSION

     (integer)

     Use to request the service level session consistency from the
     *Note `mysqlnd_ms_set_qos': apis-php-function.mysqlnd-ms-set-qos.
     Session consistency is defined as read your writes. The client is
     guaranteed to see his latest changes.

  3. MYSQLND_MS_QOS_CONSISTENCY_STRONG

     (integer)

     Use to request the service level strong consistency from the *Note
     `mysqlnd_ms_set_qos': apis-php-function.mysqlnd-ms-set-qos. Strong
     consistency is used to ensure all clients see each others changes.

  4. MYSQLND_MS_QOS_OPTION_GTID

     (integer)

     Used as a service level option with *Note `mysqlnd_ms_set_qos':
     apis-php-function.mysqlnd-ms-set-qos. to parameterize session
     consistency.

  5. MYSQLND_MS_QOS_OPTION_AGE

     (integer)

     Used as a service level option with *Note `mysqlnd_ms_set_qos':
     apis-php-function.mysqlnd-ms-set-qos. to parameterize eventual
     consistency.

_Other_

The plugins version number can be obtained using

MYSQLND_MS_VERSION

or

MYSQLND_MS_VERSION_ID

.

MYSQLND_MS_VERSION

is the string representation of the numerical version number

MYSQLND_MS_VERSION_ID

, which is an integer such as 10000. Developers can calculate the
version number as follows.

Unknown PHP API feature.

Version (part)                       Example
Major*10000                          1*10000 = 10000
Minor*100                            0*100 = 0
Patch                                0 = 0
MYSQLND_MS_VERSION_ID                10000

  1. MYSQLND_MS_VERSION

     (string)

     Plugin version string, for example, `1.0.0-prototype'.

  2. MYSQLND_MS_VERSION_ID

     (integer)

     Plugin version number, for example, 10000.


File: manual.info,  Node: apis-php-ref.mysqlnd-ms,  Next: apis-php-mysqlnd-ms.changes,  Prev: apis-php-mysqlnd-ms.constants,  Up: apis-php-book.mysqlnd-ms

22.9.2.39 Mysqlnd_ms Functions
..............................

* Menu:

* apis-php-function.mysqlnd-ms-get-last-gtid::  `mysqlnd_ms_get_last_gtid'
* apis-php-function.mysqlnd-ms-get-last-used-connection::  `mysqlnd_ms_get_last_used_connection'
* apis-php-function.mysqlnd-ms-get-stats::  `mysqlnd_ms_get_stats'
* apis-php-function.mysqlnd-ms-match-wild::  `mysqlnd_ms_match_wild'
* apis-php-function.mysqlnd-ms-query-is-select::  `mysqlnd_ms_query_is_select'
* apis-php-function.mysqlnd-ms-set-qos::  `mysqlnd_ms_set_qos'
* apis-php-function.mysqlnd-ms-set-user-pick-server::  `mysqlnd_ms_set_user_pick_server'

Copyright 1997-2012 the PHP Documentation Group.


File: manual.info,  Node: apis-php-function.mysqlnd-ms-get-last-gtid,  Next: apis-php-function.mysqlnd-ms-get-last-used-connection,  Prev: apis-php-ref.mysqlnd-ms,  Up: apis-php-ref.mysqlnd-ms

22.9.2.40 `mysqlnd_ms_get_last_gtid'
....................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_ms_get_last_gtid'

     Returns the latest global transaction ID

*Description*

string mysqlnd_ms_get_last_gtid

mixedconnection

Returns a global transaction identifier which belongs to a write
operation no older than the last write performed by the client.  It is
not guaranteed that the global transaction identifier is identical to
that one created for the last write transaction performed by the client.

*Parameters*

  1. connection

     A PECL/mysqlnd_ms connection handle to a MySQL server of the type
     See section "apis-php-ref.pdo-mysql" in the online manual, See
     section "apis-php-mysqli" in the online manual> or See section
     "apis-php-mysql" in the online manual. The connection handle is
     obtained when opening a connection with a host name that matches a
     mysqlnd_ms configuration file entry using any of the above three
     MySQL driver extensions.

*Return Values*

Returns a global transaction ID (GTID) on success. Otherwise, returns

FALSE

.

The function *Note `mysqlnd_ms_get_last_gtid':
apis-php-function.mysqlnd-ms-get-last-gtid.  returns the GTID obtained
when executing the SQL statement from the `fetch_last_gtid' entry of the
`global_transaction_id_injection' section from the plugins
configuration file.

The function may be called after the GTID has been incremented.

*Notes*

*Note*:

*Note `mysqlnd_ms_get_last_gtid':
apis-php-function.mysqlnd-ms-get-last-gtid.  requires PHP >= 5.4.0 and
PECL mysqlnd_ms >= 1.2.0.  Internally, it is using a `mysqlnd' library C
functionality not available with PHP 5.3.

*Examples*


     <?php
     /* Open mysqlnd_ms connection using mysqli, PDO_MySQL or mysql extension */
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (!$mysqli)
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     /* auto commit mode, transaction on master, GTID must be incremented */
     if (!$mysqli->query("DROP TABLE IF EXISTS test"))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     printf("GTID after transaction %s\n", mysqlnd_ms_get_last_gtid($mysqli));

     /* auto commit mode, transaction on master, GTID must be incremented */
     if (!$mysqli->query("CREATE TABLE test(id INT)"))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     printf("GTID after transaction %s\n", mysqlnd_ms_get_last_gtid($mysqli));
     ?>

*See Also*

*Note Global Transaction IDs: apis-php-mysqlnd-ms.gtid.


File: manual.info,  Node: apis-php-function.mysqlnd-ms-get-last-used-connection,  Next: apis-php-function.mysqlnd-ms-get-stats,  Prev: apis-php-function.mysqlnd-ms-get-last-gtid,  Up: apis-php-ref.mysqlnd-ms

22.9.2.41 `mysqlnd_ms_get_last_used_connection'
...............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_ms_get_last_used_connection'

     Returns an array which describes the last used connection

*Description*

array mysqlnd_ms_get_last_used_connection

mixedconnection

Returns an array which describes the last used connection from the
plugins connection pool currently pointed to by the user connection
handle. If using the plugin, a user connection handle represents a pool
of database connections. It is not possible to tell from the user
connection handles properties to which database server from the pool
the user connection handle points.

The function can be used to debug or monitor PECL mysqlnd_ms.

*Parameters*

  1. connection

     A MySQL connection handle obtained from any of the connect
     functions of the mysqli, mysql or See section
     "apis-php-ref.pdo-mysql" in the online manual extensions.

*Return Values*

FALSE

on error. Otherwise, an array which describes the connection used to
execute the last statement on.

Array which describes the connection.

Unknown PHP API feature.

PropertyDescription                                        Version
`scheme'Connection scheme. Either `tcp://host:port' or     Since 1.1.0.
        `unix://host:socket'. If you want to distinguish   
        connections from each other use a combination of   
        `scheme' and `thread_id' as a unique key. Neither  
        `scheme' nor `thread_id' alone are sufficient to   
        distinguish two connections from each other. Two   
        servers may assign the same `thread_id' to two     
        different connections. Thus, connections in the    
        pool may have the same `thread_id'. Also, do not   
        rely on uniqueness of `scheme' in a pool. Your QA  
        engineers may use the same MySQL server instance   
        for two distinct logical roles and add it          
        multiple times to the pool. This hack is used, for 
        example, in the test suite.                        
`host'  Database server host used with the connection.     Since 1.1.0.
        The host is only set with TCP/IP connections. It   
        is empty with Unix domain or Windows named pipe    
        connections,                                       
`host_info'A character string representing the server         Since 1.1.2.
        hostname and the connection type.                  
`port'  Database server port used with the connection.     Since 1.1.0.
`socket_or_pipe'Unix domain socket or Windows named pipe used      Since 1.1.2.
        with the connection. The value is empty for        
        TCP/IP connections.                                
`thread_id'Connection thread id.                              Since 1.1.0.
`last_message'Info message obtained from the MySQL C API         Since 1.1.0.
        function mysql_info().  Please, see `mysqli_info'  
        for a description.                                 
`errno' Error code.                                        Since 1.1.0.
`error' Error message.                                     Since 1.1.0.
`sqlstate'Error SQLstate code.                               Since 1.1.0.

*Notes*

*Note*:

*Note `mysqlnd_ms_get_last_used_connection':
apis-php-function.mysqlnd-ms-get-last-used-connection.  requires PHP >=
5.4.0 and PECL mysqlnd_ms >> 1.1.0.  Internally, it is using a
`mysqlnd' library C call not available with PHP 5.3.

*Examples*

The example assumes that `myapp' refers to a plugin configuration file
section and represents a connection pool.


     <?php
     $link = new mysqli("myapp", "user", "password", "database");
     $res = $link->query("SELECT 1 FROM DUAL");
     var_dump(mysqlnd_ms_get_last_used_connection($link));
     ?>

The above example will output:


     array(10) {
       ["scheme"]=>
       string(22) "unix:///tmp/mysql.sock"
       ["host_info"]=>
       string(25) "Localhost via UNIX socket"
       ["host"]=>
       string(0) ""
       ["port"]=>
       int(3306)
       ["socket_or_pipe"]=>
       string(15) "/tmp/mysql.sock"
       ["thread_id"]=>
       int(46253)
       ["last_message"]=>
       string(0) ""
       ["errno"]=>
       int(0)
       ["error"]=>
       string(0) ""
       ["sqlstate"]=>
       string(5) "00000"
     }


File: manual.info,  Node: apis-php-function.mysqlnd-ms-get-stats,  Next: apis-php-function.mysqlnd-ms-match-wild,  Prev: apis-php-function.mysqlnd-ms-get-last-used-connection,  Up: apis-php-ref.mysqlnd-ms

22.9.2.42 `mysqlnd_ms_get_stats'
................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_ms_get_stats'

     Returns query distribution and connection statistics

*Description*

array mysqlnd_ms_get_stats

Returns an array of statistics collected by the replication and load
balancing plugin.

The PHP configuration setting `mysqlnd_ms.collect_statistics' controls
the collection of statistics. The collection of statistics is disabled
by default for performance reasons.

The scope of the statistics is the `PHP' process. Depending on your
deployment model a `PHP' process may handle one or multiple requests.

Statistics are aggregated for all connections and all storage handler.
It is not possible to tell how much queries originating from `mysqli',
`PDO_MySQL' or `mysql' API calls have contributed to the aggregated
data values.

*Parameters*

This function has no parameters.

*Return Values*

Returns

NULL

if the PHP configuration directive `mysqlnd_ms.enable' has disabled the
plugin. Otherwise, returns array of statistics.

Array of statistics

Unknown PHP API feature.

StatisticDescription                                        Version
`use_slave'The semantics of this statistic has changed        Since 1.0.0.
        between 1.0.1 - 1.1.0.                             
                                                           
        The meaning for version 1.0.1 is as follows.       
        Number of statements considered as read-only by    
        the built-in query analyzer. Neither statements    
        which begin with a SQL hint to force use of slave  
        nor statements directed to a slave by an           
        user-defined callback are included.  The total     
        number of statements sent to the slaves is         
        `use_slave' + `use_slave_sql_hint' +               
        `use_slave_callback'.                              
                                                           
        PECL/mysqlnd_ms 1.1.0 introduces a new concept of  
        chained filters. The statistics is now set by the  
        internal load balancing filter. With version       
        1.1.0 the load balancing filter is always the      
        last in the filter chain, if used. In future       
        versions a load balancing filter may be followed   
        by other filters causing another change in the     
        meaning of the statistic. If, in the future, a     
        load balancing filter is followed by another       
        filter it is no longer guaranteed that the         
        statement, which increments `use_slave', will be   
        executed on the slaves.                            
                                                           
        The meaning for version 1.1.0 is as follows.       
        Number of statements sent to the slaves.           
        Statements directed to a slave by the user filter  
        (an user-defined callback) are not included. The   
        latter are counted by `use_slave_callback'.        
`use_master'The semantics of this statistic has changed        Since 1.0.0.
        between 1.0.1 - 1.1.0.                             
                                                           
        The meaning for version 1.0.1 is as follows.       
        Number of statements not considered as read-only   
        by the built-in query analyzer. Neither            
        statements which begin with a SQL hint to force    
        use of master nor statements directed to a master  
        by an user-defined callback are included. The      
        total number of statements sent to the master is   
        `use_master' + `use_master_sql_hint' +             
        `use_master_callback'.                             
                                                           
        PECL/mysqlnd_ms 1.1.0 introduces a new concept of  
        chained filters. The statictics is now set by the  
        internal load balancing filter. With version       
        1.1.0 the load balancing filter is always the      
        last in the filter chain, if used. In future       
        versions a load balancing filter may be followed   
        by other filters causing another change in the     
        meaning of the statistic. If, in the future, a     
        load balancing filter is followed by another       
        filter it is no longer guaranteed that the         
        statement, which increments `use_master', will be  
        executed on the slaves.                            
                                                           
        The meaning for version 1.1.0 is as follows.       
        Number of statements sent to the masters.          
        Statements directed to a master by the user        
        filter (an user-defined callback) are not          
        included. The latter are counted by                
        `use_master_callback'.                             
`use_slave_guess'Number of statements the built-in query analyzer   Since 1.1.0.
        recommends sending to a slave because they         
        contain no SQL hint to force use of a certain      
        server. The recommendation may be overruled in     
        the following. It is not guaranteed whether the    
        statement will be executed on a slave or not.      
        This is how often the internal `is_select'         
        function has guessed that a slave shall be used.   
        Please, see also the user space function *Note     
        `mysqlnd_ms_query_is_select':                      
        apis-php-function.mysqlnd-ms-query-is-select.      
`use_master_guess'Number of statements the built-in query analyzer   Since 1.1.0.
        recommends sending to a master because they        
        contain no SQL hint to force use of a certain      
        server. The recommendation may be overruled in     
        the following. It is not guaranteed whether the    
        statement will be executed on a slave or not.      
        This is how often the internal `is_select'         
        function has guessed that a master shall be used.  
        Please, see also the user space function *Note     
        `mysqlnd_ms_query_is_select':                      
        apis-php-function.mysqlnd-ms-query-is-select.      
`use_slave_sql_hint'Number of statements sent to a slave because       Since 1.0.0.
        statement begins with the SQL hint to force use    
        of slave.                                          
`use_master_sql_hint'Number of statements sent to a master because      Since 1.0.0.
        statement begins with the SQL hint to force use    
        of master.                                         
`use_last_used_sql_hint'Number of statements sent to server which has run  Since 1.0.0.
        the previous statement, because statement begins   
        with the SQL hint to force use of previously used  
        server.                                            
`use_slave_callback'Number of statements sent to a slave because an    Since 1.0.0.
        user-defined callback has chosen a slave server    
        for statement execution.                           
`use_master_callback'Number of statements sent to a master because an   Since 1.0.0.
        user-defined callback has chosen a master server   
        for statement execution.                           
`non_lazy_connections_slave_success'Number of successfully opened slave connections    Since 1.0.0.
        from configurations not using `lazy connections'.  
        The total number of successfully opened slave      
        connections is                                     
        `non_lazy_connections_slave_success' +             
        `lazy_connections_slave_success'                   
`non_lazy_connections_slave_failure'Number of failed slave connection attempts from    Since 1.0.0.
        configurations not using `lazy connections'. The   
        total number of failed slave connection attempts   
        is `non_lazy_connections_slave_failure' +          
        `lazy_connections_slave_failure'                   
`non_lazy_connections_master_success'Number of successfully opened master connections   Since 1.0.0.
        from configurations not using `lazy connections'.  
        The total number of successfully opened master     
        connections is                                     
        `non_lazy_connections_master_success' +            
        `lazy_connections_master_success'                  
`non_lazy_connections_master_failure'Number of failed master connection attempts from   Since 1.0.0.
        configurations not using `lazy connections'. The   
        total number of failed master connection attempts  
        is `non_lazy_connections_master_failure' +         
        `lazy_connections_master_failure'                  
`lazy_connections_slave_success'Number of successfully opened slave connections    Since 1.0.0.
        from configurations using `lazy connections'.      
`lazy_connections_slave_failure'Number of failed slave connection attempts from    Since 1.0.0.
        configurations using `lazy connections'.           
`lazy_connections_master_success'Number of successfully opened master connections   Since 1.0.0.
        from configurations using `lazy connections'.      
`lazy_connections_master_failure'Number of failed master connection attempts from   Since 1.0.0.
        configurations using `lazy connections'.           
`trx_autocommit_on'Number of `autocommit' mode activations via API    Since 1.0.0.
        calls.  This figure may be used to monitor         
        activity related to the plugin configuration       
        setting `trx_stickiness'.  If, for example, you    
        want to know if a certain API call invokes the     
        `mysqlnd' library function `trx_autocommit()',     
        which is a requirement for `trx_stickiness', you   
        may call the user API function in question and     
        check if the statistic has changed. The statistic  
        is modified only by the plugins internal           
        subclassed `trx_autocommit()' method.              
`trx_autocommit_off'Number of `autocommit' mode deactivations via API  Since 1.0.0.
        calls.                                             
`trx_master_forced'Number of statements redirected to the master      Since 1.0.0.
        while `trx_stickiness=master' and `autocommit'     
        mode is disabled.                                  
`gtid_autocommit_injections_success'Number of successful SQL injections in autocommit  Since 1.2.0.
        mode as part of the plugins client-side *Note      
        global transaction id emulation:                   
        apis-php-mysqlnd-ms.gtid.                          
`gtid_autocommit_injections_failure'Number of failed SQL injections in autocommit      Since 1.2.0.
        mode as part of the plugins client-side *Note      
        global transaction id emulation:                   
        apis-php-mysqlnd-ms.gtid.                          
`gtid_commit_injections_success'Number of successful SQL injections in commit      Since 1.2.0.
        mode as part of the plugins client-side *Note      
        global transaction id emulation:                   
        apis-php-mysqlnd-ms.gtid.                          
`gtid_commit_injections_failure'Number of failed SQL injections in commit mode as  Since 1.2.0.
        part of the plugins client-side *Note global       
        transaction id emulation:                          
        apis-php-mysqlnd-ms.gtid.                          
`gtid_implicit_commit_injections_success'Number of successful SQL injections when implicit  Since 1.2.0.
        commit is detected as part of the plugins          
        client-side *Note global transaction id            
        emulation: apis-php-mysqlnd-ms.gtid. Implicit      
        commit happens, for example, when autocommit has   
        been turned off, a query is executed and           
        autocommit is enabled again. In that case, the     
        statement will be committed by the server and SQL  
        to maintain is injected before the autocommit is   
        re-enabled. Another sequence causing an an         
        implicit commit is `begin()', `query()',           
        `begin()'.  The second call to `begin()' will      
        implicitly commit the transaction started by the   
        first call to `begin()'.  `begin()' refers to      
        internal library calls not actual PHP user API     
        calls.                                             
`gtid_implicit_commit_injections_failure'Number of failed SQL injections when implicit      Since 1.2.0.
        commit is detected as part of the plugins          
        client-side *Note global transaction id            
        emulation: apis-php-mysqlnd-ms.gtid. Implicit      
        commit happens, for example, when autocommit has   
        been turned off, a query is executed and           
        autocommit is enabled again. In that case, the     
        statement will be committed by the server and SQL  
        to maintain is injected before the autocommit is   
        re-enabled.                                        
`transient_error_retries'How often an operation has been retried when a     Since 1.6.0.
        transient error was detected. See also,            
        `transient_error' plugin configuration file        
        setting.                                           

*Examples*


     <?php
     printf("mysqlnd_ms.enable = %d\n", ini_get("mysqlnd_ms.enable"));
     printf("mysqlnd_ms.collect_statistics = %d\n", ini_get("mysqlnd_ms.collect_statistics"));
     var_dump(mysqlnd_ms_get_stats());
     ?>

The above example will output:


     mysqlnd_ms.enable = 1
     mysqlnd_ms.collect_statistics = 1
     array(26) {
       ["use_slave"]=>
       string(1) "0"
       ["use_master"]=>
       string(1) "0"
       ["use_slave_guess"]=>
       string(1) "0"
       ["use_master_guess"]=>
       string(1) "0"
       ["use_slave_sql_hint"]=>
       string(1) "0"
       ["use_master_sql_hint"]=>
       string(1) "0"
       ["use_last_used_sql_hint"]=>
       string(1) "0"
       ["use_slave_callback"]=>
       string(1) "0"
       ["use_master_callback"]=>
       string(1) "0"
       ["non_lazy_connections_slave_success"]=>
       string(1) "0"
       ["non_lazy_connections_slave_failure"]=>
       string(1) "0"
       ["non_lazy_connections_master_success"]=>
       string(1) "0"
       ["non_lazy_connections_master_failure"]=>
       string(1) "0"
       ["lazy_connections_slave_success"]=>
       string(1) "0"
       ["lazy_connections_slave_failure"]=>
       string(1) "0"
       ["lazy_connections_master_success"]=>
       string(1) "0"
       ["lazy_connections_master_failure"]=>
       string(1) "0"
       ["trx_autocommit_on"]=>
       string(1) "0"
       ["trx_autocommit_off"]=>
       string(1) "0"
       ["trx_master_forced"]=>
       string(1) "0"
       ["gtid_autocommit_injections_success"]=>
       string(1) "0"
       ["gtid_autocommit_injections_failure"]=>
       string(1) "0"
       ["gtid_commit_injections_success"]=>
       string(1) "0"
       ["gtid_commit_injections_failure"]=>
       string(1) "0"
       ["gtid_implicit_commit_injections_success"]=>
       string(1) "0"
       ["gtid_implicit_commit_injections_failure"]=>
       string(1) "0"
       ["transient_error_retries"]=>
       string(1) "0"
     }

*See Also*

*Note Runtime configuration: apis-php-mysqlnd-ms.configuration.

mysqlnd_ms.collect_statistics

mysqlnd_ms.enable

*Note Monitoring: apis-php-mysqlnd-ms.monitoring.


File: manual.info,  Node: apis-php-function.mysqlnd-ms-match-wild,  Next: apis-php-function.mysqlnd-ms-query-is-select,  Prev: apis-php-function.mysqlnd-ms-get-stats,  Up: apis-php-ref.mysqlnd-ms

22.9.2.43 `mysqlnd_ms_match_wild'
.................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_ms_match_wild'

     Finds whether a table name matches a wildcard pattern or not

*Description*

bool mysqlnd_ms_match_wild

stringtable_name

stringwildcard

Finds whether a table name matches a wildcard pattern or not.

This function is not of much practical relevance with PECL mysqlnd_ms
1.1.0 because the plugin does not support MySQL replication table
filtering yet.

*Parameters*

  1. table_name

     The table name to check if it is matched by the wildcard.

  2. wildcard

     The wildcard pattern to check against the table name. The wildcard
     pattern supports the same placeholders as MySQL replication
     filters do.

     MySQL replication filters can be configured by using the MySQL
     Server configuration options `--replicate-wild-do-table' and
     `--replicate-wild-do-db'. Please, consult the MySQL Reference
     Manual to learn more about this MySQL Server feature.

     The supported placeholders are:

        * `%' - zero or more literals

        * `%' - one literal

     Placeholders can be escaped using `\'.

*Return Values*

Returns

TRUE

`table_name' is matched by `wildcard'. Otherwise, returns

FALSE

*Examples*


     <?php
     var_dump(mysqlnd_ms_match_wild("schema_name.table_name", "schema%"));
     var_dump(mysqlnd_ms_match_wild("abc", "_"));
     var_dump(mysqlnd_ms_match_wild("table1", "table_"));
     var_dump(mysqlnd_ms_match_wild("asia_customers", "%customers"));
     var_dump(mysqlnd_ms_match_wild("funny%table","funny\%table"));
     var_dump(mysqlnd_ms_match_wild("funnytable", "funny%table"));
     ?>

The above example will output:


     bool(true)
     bool(false)
     bool(true)
     bool(true)
     bool(true)
     bool(true)


File: manual.info,  Node: apis-php-function.mysqlnd-ms-query-is-select,  Next: apis-php-function.mysqlnd-ms-set-qos,  Prev: apis-php-function.mysqlnd-ms-match-wild,  Up: apis-php-ref.mysqlnd-ms

22.9.2.44 `mysqlnd_ms_query_is_select'
......................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_ms_query_is_select'

     Find whether to send the query to the master, the slave or the
     last used MySQL server

*Description*

int mysqlnd_ms_query_is_select

stringquery

Finds whether to send the query to the master, the slave or the last
used MySQL server.

The plugins built-in read/write split mechanism will be used to analyze
the query string to make a recommendation where to send the query. The
built-in read/write split mechanism is very basic and simple. The
plugin will recommend sending all queries to the MySQL replication
master server but those which begin with `SELECT', or begin with a SQL
hint which enforces sending the query to a slave server. Due to the
basic but fast algorithm the plugin may propose to run some read-only
statements such as `SHOW TABLES' on the replication master.

*Parameters*

  1. query

     Query string to test.

*Return Values*

A return value of

MYSQLND_MS_QUERY_USE_MASTER

indicates that the query should be send to the MySQL replication master
server. The function returns a value of

MYSQLND_MS_QUERY_USE_SLAVE

if the query can be run on a slave because it is considered read-only.
A value of

MYSQLND_MS_QUERY_USE_LAST_USED

is returned to recommend running the query on the last used server.
This can either be a MySQL replication master server or a MySQL
replication slave server.

If read write splitting has been disabled by setting
`mysqlnd_ms.disable_rw_split', the function will always return

MYSQLND_MS_QUERY_USE_MASTER

or

MYSQLND_MS_QUERY_USE_LAST_USED

.

*Examples*


     <?php
     function is_select($query)
     {
      switch (mysqlnd_ms_query_is_select($query))
      {
       case MYSQLND_MS_QUERY_USE_MASTER:
        printf("'%s' should be run on the master.\n", $query);
        break;
       case MYSQLND_MS_QUERY_USE_SLAVE:
        printf("'%s' should be run on a slave.\n", $query);
        break;
       case MYSQLND_MS_QUERY_USE_LAST_USED:
        printf("'%s' should be run on the server that has run the previous query\n", $query);
        break;
       default:
        printf("No suggestion where to run the '%s', fallback to master recommended\n", $query);
        break;
      }
     }

     is_select("INSERT INTO test(id) VALUES (1)");
     is_select("SELECT 1 FROM DUAL");
     is_select("/*" . MYSQLND_MS_LAST_USED_SWITCH . "*/SELECT 2 FROM DUAL");
     ?>

The above example will output:


     INSERT INTO test(id) VALUES (1) should be run on the master.
     SELECT 1 FROM DUAL should be run on a slave.
     /*ms=last_used*/SELECT 2 FROM DUAL should be run on the server that has run the previous query

*See Also*

*Note Predefined Constants: apis-php-mysqlnd-ms.constants.

`user' filter

*Note Runtime configuration: apis-php-mysqlnd-ms.configuration.

mysqlnd_ms.disable_rw_split

mysqlnd_ms.enable


File: manual.info,  Node: apis-php-function.mysqlnd-ms-set-qos,  Next: apis-php-function.mysqlnd-ms-set-user-pick-server,  Prev: apis-php-function.mysqlnd-ms-query-is-select,  Up: apis-php-ref.mysqlnd-ms

22.9.2.45 `mysqlnd_ms_set_qos'
..............................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_ms_set_qos'

     Sets the quality of service needed from the cluster

*Description*

bool mysqlnd_ms_set_qos

mixedconnection

intservice_level

intservice_level_option

mixedoption_value

Sets the quality of service needed from the cluster. A database cluster
delivers a certain quality of service to the user depending on its
architecture. A major aspect of the quality of service is the
consistency level the cluster can offer. An asynchronous MySQL
replication cluster defaults to eventual consistency for slave reads: a
slave may serve stale data, current data, or it may have not the
requested data at all, because it is not synchronous to the master. In
a MySQL replication cluster, only master accesses can give strong
consistency, which promises that all clients see each others changes.

PECL/mysqlnd_ms hides the complexity of choosing appropriate nodes to
achieve a certain level of service from the cluster.  The "Quality of
Service" filter implements the necessary logic. The filter can either
be configured in the plugins configuration file, or at runtime using
*Note `mysqlnd_ms_set_qos': apis-php-function.mysqlnd-ms-set-qos.

Similar results can be achieved with PECL mysqlnd_ms < 1.2.0, if using
SQL hints to force the use of a certain type of node or using the
`master_on_write' plugin configuration option. The first requires more
code and causes more work on the application side. The latter is less
refined than using the quality of service filter. Settings made through
the function call can be reversed, as shown in the example below. The
example temporarily switches to a higher service level (session
consistency, read your writes) and returns back to the clusters default
after it has performed all operations that require the better service.
This way, read load on the master can be minimized compared to using
`master_on_write', which would continue using the master after the
first write.

Since 1.5.0 calls will fail when done in the middle of a transaction if
transaction stickiness is enabled and transaction boundaries have been
detected. properly.

*Parameters*

  1. connection

     A PECL/mysqlnd_ms connection handle to a MySQL server of the type
     See section "apis-php-ref.pdo-mysql" in the online manual, See
     section "apis-php-mysqli" in the online manual or See section
     "apis-php-mysql" in the online manual for which a service level is
     to be set. The connection handle is obtained when opening a
     connection with a host name that matches a mysqlnd_ms
     configuration file entry using any of the above three MySQL driver
     extensions.

  2. service_level

     The requested service level:

     MYSQLND_MS_QOS_CONSISTENCY_EVENTUAL

     ,

     MYSQLND_MS_QOS_CONSISTENCY_SESSION

     or

     MYSQLND_MS_QOS_CONSISTENCY_STRONG

     .

  3. service_level_option

     An option to parameterize the requested service level. The option
     can either be

     MYSQLND_MS_QOS_OPTION_GTID

     or

     MYSQLND_MS_QOS_OPTION_AGE

     .

     The option

     MYSQLND_MS_QOS_OPTION_GTID

     can be used to refine the service level

     MYSQLND_MS_QOS_CONSISTENCY_SESSION

     . It must be combined with a fourth function parameter, the
     option_value. The option_value shall be a global transaction ID
     obtained from *Note `mysqlnd_ms_get_last_gtid':
     apis-php-function.mysqlnd-ms-get-last-gtid.  If set, the plugin
     considers both master servers and asynchronous slaves for session
     consistency (read your writes). Otherwise, only masters are used
     to achieve session consistency. A slave is considered up-to-date
     and checked if it has already replicated the global transaction ID
     from option_value.  Please note, searching appropriate slaves is
     an expensive and slow operation. Use the feature sparsely, if the
     master cannot handle the read load alone.

     The

     MYSQLND_MS_QOS_OPTION_AGE

     option can be combined with the

     MYSQLND_MS_QOS_CONSISTENCY_EVENTUAL

     service level, to filter out asynchronous slaves that lag more
     seconds behind the master than option_value. If set, the plugin
     will only consider slaves for reading if `SHOW SLAVE STATUS'
     reports `Slave_IO_Running=Yes', `Slave_SQL_Running=Yes' and
     `Seconds_Behind_Master <= option_value'. Please note, searching
     appropriate slaves is an expensive and slow operation. Use the
     feature sparsely in version 1.2.0. Future versions may improve the
     algorithm used to identify candidates. Please, see the MySQL
     reference manual about the precision, accuracy and limitations of
     the MySQL administrative command `SHOW SLAVE STATUS'.

  4. option_value

     Parameter value for the service level option. See also the
     service_level_option parameter.

*Return Values*

Returns

TRUE

if the connections service level has been switched to the requested.
Otherwise, returns

FALSE

*Notes*

*Note*:

*Note `mysqlnd_ms_set_qos': apis-php-function.mysqlnd-ms-set-qos.
requires PHP >= 5.4.0 and PECL mysqlnd_ms >= 1.2.0.  Internally, it is
using a `mysqlnd' library C functionality not available with PHP 5.3.

*Examples*


     <?php
     /* Open mysqlnd_ms connection using mysqli, PDO_MySQL or mysql extension */
     $mysqli = new mysqli("myapp", "username", "password", "database");
     if (!$mysqli)
       /* Of course, your error handling is nicer... */
       die(sprintf("[%d] %s\n", mysqli_connect_errno(), mysqli_connect_error()));

     /* Session consistency: read your writes */
     $ret = mysqlnd_ms_set_qos($mysqli, MYSQLND_MS_QOS_CONSISTENCY_SESSION);
     if (!$ret)
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     /* Will use master and return fresh data, client can see his last write */
     if (!$res = $mysqli->query("SELECT item, price FROM orders WHERE order_id = 1"))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

     /* Back to default: use of all slaves and masters permitted, stale data can happen */
     if (!mysqlnd_ms_set_qos($mysqli, MYSQLND_MS_QOS_CONSISTENCY_EVENTUAL))
       die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));
     ?>

*See Also*

*Note `mysqlnd_ms_get_last_gtid':
apis-php-function.mysqlnd-ms-get-last-gtid.

*Note Service level and consistency concept:
apis-php-mysqlnd-ms.qos-consistency.

*Note Filter concept: apis-php-mysqlnd-ms.filter.


File: manual.info,  Node: apis-php-function.mysqlnd-ms-set-user-pick-server,  Prev: apis-php-function.mysqlnd-ms-set-qos,  Up: apis-php-ref.mysqlnd-ms

22.9.2.46 `mysqlnd_ms_set_user_pick_server'
...........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_ms_set_user_pick_server'

     Sets a callback for user-defined read/write splitting

*Description*

bool mysqlnd_ms_set_user_pick_server

stringfunction

Sets a callback for user-defined read/write splitting. The plugin will
call the callback only if `pick[]=user' is the default rule for server
picking in the relevant section of the plugins configuration file.

The plugins built-in read/write query split mechanism decisions can be
overwritten in two ways. The easiest way is to prepend the query string
with the SQL hints

MYSQLND_MS_MASTER_SWITCH

,

MYSQLND_MS_SLAVE_SWITCH

or

MYSQLND_MS_LAST_USED_SWITCH

. Using SQL hints one can control, for example, whether a query shall
be send to the MySQL replication master server or one of the slave
servers. By help of SQL hints it is not possible to pick a certain
slave server for query execution.

Full control on server selection can be gained using a callback
function. Use of a callback is recommended to expert users only because
the callback has to cover all cases otherwise handled by the plugin.

The plugin will invoke the callback function for selecting a server
from the lists of configured master and slave servers.  The callback
function inspects the query to run and picks a server for query
execution by returning the hosts URI, as found in the master and slave
list.

If the lazy connections are enabled and the callback chooses a slave
server for which no connection has been established so far and
establishing the connection to the slave fails, the plugin will return
an error upon the next action on the failed connection, for example,
when running a query. It is the responsibility of the application
developer to handle the error.  For example, the application can re-run
the query to trigger a new server selection and callback invocation. If
so, the callback must make sure to select a different slave, or check
slave availability, before returning to the plugin to prevent an
endless loop.

*Parameters*

  1. function

     The function to be called. Class methods may also be invoked
     statically using this function by passing `array($classname,
     $methodname)' to this parameter. Additionally class methods of an
     object instance may be called by passing `array($objectinstance,
     $methodname)' to this parameter.

*Return Values*

Host to run the query on. The host URI is to be taken from the master
and slave connection lists passed to the callback function. If callback
returns a value neither found in the master nor in the slave connection
lists the plugin will fallback to the second pick method configured via
the `pick[]' setting in the plugin configuration file. If not second
pick method is given, the plugin falls back to the build-in default
pick method for server selection.

*Notes*

*Note*:

*Note `mysqlnd_ms_set_user_pick_server':
apis-php-function.mysqlnd-ms-set-user-pick-server.  is available with
PECL mysqlnd_ms < 1.1.0. It has been replaced by the `user' filter.
Please, check the *Note Change History:
apis-php-mysqlnd-ms.changes-one-one. for upgrade notes.

*Examples*


     [myapp]
     master[] = localhost
     slave[] = 192.168.2.27:3306
     slave[] = 192.168.78.136:3306
     pick[] = user


     <?php

     function pick_server($connected, $query, $master, $slaves, $last_used)
     {
      static $slave_idx = 0;
      static $num_slaves = NULL;
      if (is_null($num_slaves))
       $num_slaves = count($slaves);

      /* default: fallback to the plugins build-in logic */
      $ret = NULL;

      printf("User has connected to '%s'...\n", $connected);
      printf("... deciding where to run '%s'\n", $query);

      $where = mysqlnd_ms_query_is_select($query);
      switch ($where)
      {
       case MYSQLND_MS_QUERY_USE_MASTER:
        printf("... using master\n");
        $ret = $master[0];
        break;
       case MYSQLND_MS_QUERY_USE_SLAVE:
        /* SELECT or SQL hint for using slave */
        if (stristr($query, "FROM table_on_slave_a_only"))
        {
         /* a table which is only on the first configured slave  */
         printf("... access to table available only on slave A detected\n");
         $ret = $slaves[0];
        }
        else
        {
         /* round robin */
         printf("... some read-only query for a slave\n");
         $ret = $slaves[$slave_idx++ % $num_slaves];
        }
        break;
       case MYSQLND_MS_QUERY_LAST_USED:
        printf("... using last used server\n");
        $ret = $last_used;
        break;
      }

      printf("... ret = '%s'\n", $ret);
      return $ret;
     }

     mysqlnd_ms_set_user_pick_server("pick_server");

     $mysqli = new mysqli("myapp", "root", "root", "test");

     if (!($res = $mysqli->query("SELECT 1 FROM DUAL")))
      printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     else
      $res->close();

     if (!($res = $mysqli->query("SELECT 2 FROM DUAL")))
      printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     else
      $res->close();

     if (!($res = $mysqli->query("SELECT * FROM table_on_slave_a_only")))
      printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
     else
      $res->close();

     $mysqli->close();
     ?>

The above example will output:


     User has connected to 'myapp'...
     ... deciding where to run 'SELECT 1 FROM DUAL'
     ... some read-only query for a slave
     ... ret = 'tcp://192.168.2.27:3306'
     User has connected to 'myapp'...
     ... deciding where to run 'SELECT 2 FROM DUAL'
     ... some read-only query for a slave
     ... ret = 'tcp://192.168.78.136:3306'
     User has connected to 'myapp'...
     ... deciding where to run 'SELECT * FROM table_on_slave_a_only'
     ... access to table available only on slave A detected
     ... ret = 'tcp://192.168.2.27:3306'

*See Also*

*Note `mysqlnd_ms_query_is_select':
apis-php-function.mysqlnd-ms-query-is-select.

*Note Filter concept: apis-php-mysqlnd-ms.filter.

`user' filter


File: manual.info,  Node: apis-php-mysqlnd-ms.changes,  Prev: apis-php-ref.mysqlnd-ms,  Up: apis-php-book.mysqlnd-ms

22.9.2.47 Change History
........................

* Menu:

* apis-php-mysqlnd-ms.changes-one-six::  PECL/mysqlnd_ms 1.6 series
* apis-php-mysqlnd-ms.changes-one-five::  PECL/mysqlnd_ms 1.5 series
* apis-php-mysqlnd-ms.changes-one-four::  PECL/mysqlnd_ms 1.4 series
* apis-php-mysqlnd-ms.changes-one-three::  PECL/mysqlnd_ms 1.3 series
* apis-php-mysqlnd-ms.changes-one-two::  PECL/mysqlnd_ms 1.2 series
* apis-php-mysqlnd-ms.changes-one-one::  PECL/mysqlnd_ms 1.1 series
* apis-php-mysqlnd-ms.changes-one-o::  PECL/mysqlnd_ms 1.0 series

Copyright 1997-2012 the PHP Documentation Group.

This change history is a high level summary of selected changes that
may impact applications and/or break backwards compatibility.

See also the `CHANGES' file in the source distribution for a complete
list of changes.


File: manual.info,  Node: apis-php-mysqlnd-ms.changes-one-six,  Next: apis-php-mysqlnd-ms.changes-one-five,  Prev: apis-php-mysqlnd-ms.changes,  Up: apis-php-mysqlnd-ms.changes

22.9.2.48 PECL/mysqlnd_ms 1.6 series
....................................

Copyright 1997-2012 the PHP Documentation Group.

1.6.0-alpha

   * Release date: TBD

   * Motto/theme: Maintenance

*Note*:

This is the current development series. All features are at an early
stage. Changes may happen at any time without prior notice. Please, do
not use this version in production environments.

The documentation may not reflect all changes yet.

Bug fixes

   * No new bugs reported

Feature changes

   * Introduced automatic retry loop for *Note transient errors:
     apis-php-mysqlnd-ms.transient_errors. and *Note corresponding
     statistic: apis-php-function.mysqlnd-ms-get-stats. to count the
     number of implicit retries.  Some distributed database clusters
     use transient errors to hint a client to retry its operation in a
     bit. Most often, the client is then supposed to halt execution
     (sleep) for a short moment before retrying the desired operation.
     Immediately failing over to another node is not necessary in
     response to the error. Instead, a retry loop can be performed.
     Common situation when using MySQL Cluster.


File: manual.info,  Node: apis-php-mysqlnd-ms.changes-one-five,  Next: apis-php-mysqlnd-ms.changes-one-four,  Prev: apis-php-mysqlnd-ms.changes-one-six,  Up: apis-php-mysqlnd-ms.changes

22.9.2.49 PECL/mysqlnd_ms 1.5 series
....................................

Copyright 1997-2012 the PHP Documentation Group.

1.5.1-stable

   * Release date: 06/2013

   * Motto/theme: Sharding support, improved transaction support

*Note*:

This is the current stable series. Use this version in production
environments.

The documentation is complete.

1.5.0-alpha

   * Release date: 03/2013

   * Motto/theme: Sharding support, improved transaction support

Bug fixes

   * Fixed #60605 PHP segmentation fault when mysqlnd_ms is enabled.

   * Setting transaction stickiness disables all load balancing,
     including automatic failover, for the duration of a transaction.
     So far connection switches could have happened in the middle of a
     transaction in multi-master configurations and during automatic
     failover although transaction monitoring had detected transaction
     boundaries properly.

   * BC break and bug fix. SQL hints enforcing the use of a specific
     kind of server (

     MYSQLND_MS_MASTER_SWITCH

     ,

     MYSQLND_MS_SLAVE_SWITCH

     ,

     MYSQLND_MS_LAST_USED_SWITCH

     ) are ignored for the duration of a transaction of transaction
     stickiness is enabled and transaction boundaries have been
     detected properly.

     This is a change in behaviour. However, it is also a bug fix and a
     step to align behaviour. If, in previous versions, transaction
     stickiness, one of the above listed SQL hints and the quality of
     service filtering was combined it could happened that the SQL
     hints got ignored.  In some case the SQL hints did work, in other
     cases they did not. The new behaviour is more consistent. SQL hints
     will always be ignore for the duration of a transaction, if
     transaction stickiness is enabled.

     Please note, transaction boundary detection continues to be based
     on API call monitoring. SQL commands controlling transactions are
     not monitored.

   * BC break and bug fix. Calls to *Note `mysqlnd_ms_set_qos':
     apis-php-function.mysqlnd-ms-set-qos.  will fail when done in the
     middle of a transaction if transaction stickiness is enabled.
     Connection switches are not allowed for the duration of a
     transaction. Changing the quality of service likely results on a
     different set of servers qualifying for query execution, possibly
     making it necessary to switch connections. Thus, the call is not
     allowed in during an active transaction. The quality of server
     can, however, be changed in between transactions.

Feature changes

   * Introduced the `node_group' filter. The filter lets you organize
     servers (master and slaves) into groups. Queries can be directed
     to a certain group of servers by prefixing the query statement
     with a SQL hint/comment that contains the groups configured name.
     Grouping can be used for partitioning and sharding, and also to
     optimize for local caching. In the case of sharding, a group name
     can be thought of like a shard key.  All queries for a given shard
     key will be executed on the configured shard. Note: both the
     client and server must support sharding for sharding to function
     with mysqlnd_ms.

   * Extended configuration file validation during PHP startup (RINIT).
     An

     E_WARNING

     level error will be thrown if the configuration file can not be
     read (permissions), is empty, or the file (JSON) could not be
     parsed. Warnings may appear in log files, which depending on how
     PHP is configured.

     Distributions that aim to provide a pre-configured setup,
     including a configuration file stub, are asked to put `{}' into
     the configuration file to prevent this warning about an invalid
     configuration file.

     Further configuration file validation is done when parsing
     sections upon opening a connection. Please, note that there may
     still be situations when an invalid plugin configuration file does
     not lead to proper error messages but a failure to connect.

   * As of PHP 5.5.0, improved support for transaction boundaries
     detection was added for `mysqli'. The `mysqli' extension has been
     modified to use the new C API calls of the `mysqlnd' library to
     begin, commit, and rollback a transaction or savepoint. If
     trx_stickiness is used to enable transaction aware load balancing,
     the `mysqli_begin' (http://www.php.net/mysqli_begin),
     `mysqli_commit' and `mysqli_rollback' functions will now be
     monitered by the plugin, to go along with the `mysqli_autocommit'
     function that was already supported. All SQL features to control
     transactions are also available through the improved `mysqli'
     transaction control related functions. This means that it is not
     required to issue SQL statements instead of using API calls.
     Applications using the appropriate API calls can be load balanced
     by PECL/mysqlnd_ms in a completely transaction-aware way.

     Please note, `PDO_MySQL' has not been updated yet to utilize the
     new mysqlnd API calls. Thus, transaction boundary detection with
     `PDO_MySQL' continues to be limited to the monitoring by passing in

     PDO::ATTR_AUTOCOMMIT

     to `PDO::setAttribute' (http://www.php.net/PDO::setAttribute).

   * Introduced `trx_stickiness=on'. This trx_stickiness option differs
     from `trx_stickiness=master' as it tries to execute a read-only
     transaction on a slave, if quality of service (consistency level)
     allows the use of a slave.  Read-only transactions were introduced
     in MySQL 5.6, and they offer performance gains.

   * Query cache support is considered beta if used with the `mysqli'
     API. It should work fine with primary copy based clusters. For all
     other APIs, this feature continues to be called experimental.

   * The code examples in the mysqlnd_ms source were updated.


File: manual.info,  Node: apis-php-mysqlnd-ms.changes-one-four,  Next: apis-php-mysqlnd-ms.changes-one-three,  Prev: apis-php-mysqlnd-ms.changes-one-five,  Up: apis-php-mysqlnd-ms.changes

22.9.2.50 PECL/mysqlnd_ms 1.4 series
....................................

Copyright 1997-2012 the PHP Documentation Group.

1.4.2-stable

   * Release date: 08/2012

   * Motto/theme: Tweaking based on user feedback

1.4.1-beta

   * Release date: 08/2012

   * Motto/theme: Tweaking based on user feedback

Bug fixes

   * Fixed build with PHP 5.5

1.4.0-alpha

   * Release date: 07/2012

   * Motto/theme: Tweaking based on user feedback

Feature changes

   * BC break: Renamed plugin configuration setting `ini_file' to
     `config_file'. In early versions the plugin configuration file
     used ini style. Back then the configuration setting was named
     accordingly. It has now been renamed to reflect the newer file
     format and to distinguish it from PHP's own ini file (configuration
     directives file).

   * Introduced new default charset setting `server_charset' to allow
     proper escaping before a connection is opened. This is most useful
     when using lazy connections, which are a default.

   * Introduced `wait_for_gtid_timeout' setting to throttle slave reads
     that need session consistency. If global transaction identifier
     are used and the service level is set to session consistency, the
     plugin tries to find up-to-date slaves. The slave status check is
     done by a SQL statement. If nothing else is set, the slave status
     is checked only one can the search for more up-to-date slaves
     continues immediately thereafter.  Setting `wait_for_gtid_timeout'
     instructs the plugin to poll a slaves status for
     `wait_for_gtid_timeout' seconds if the first execution of the SQL
     statement has shown that the slave is not up-to-date yet. The poll
     will be done once per second. This way, the plugin will wait for
     slaves to catch up and throttle the client.

   * New failover strategy `loop_before_master'. By default the plugin
     does no failover. It is possible to enable automatic failover if a
     connection attempt fails. Upto version 1.3 only `master' strategy
     existed to failover to a master if a slave connection fails.
     `loop_before_master' is similar but tries all other slaves before
     attempting to connect to the master if a slave connection fails.

     The number of attempts can be limited using the `max_retries'
     option. Failed hosts can be remembered and skipped in load
     balancing for the rest of the web request. `max_retries' and
     `remember_failed' are considered experimental although decent
     stability is given. Syntax and semantics may change in the future
     without prior notice.


File: manual.info,  Node: apis-php-mysqlnd-ms.changes-one-three,  Next: apis-php-mysqlnd-ms.changes-one-two,  Prev: apis-php-mysqlnd-ms.changes-one-four,  Up: apis-php-mysqlnd-ms.changes

22.9.2.51 PECL/mysqlnd_ms 1.3 series
....................................

Copyright 1997-2012 the PHP Documentation Group.

1.3.2-stable

   * Release date: 04/2012

   * Motto/theme: see 1.3.0-alpha

Bug fixes

   * Fixed problem with multi-master where although in a transaction
     the queries to the master weren't sticky and were spread all over
     the masters (RR). Still not sticky for Random. Random_once is not
     affected.

1.3.1-beta

   * Release date: 04/2012

   * Motto/theme: see 1.3.0-alpha

Bug fixes

   * Fixed problem with building together with QC.

1.3.0-alpha

   * Release date: 04/2012

   * Motto/theme: Query caching through quality-of-service concept

The 1.3 series aims to improve the performance of applications and the
overall load of an asynchronous MySQL cluster, for example, a MySQL
cluster using MySQL Replication. This is done by transparently
replacing a slave access with a local cache access, if the application
allows it by setting an appropriate quality of service flag. When using
MySQL replication a slave can serve stale data. An application using
MySQL replication must continue to work correctly with stale data.
Given that the application is know to work correctly with stale data,
the slave access can transparently be replace with a local cache access.

*Note PECL/mysqlnd_qc: apis-php-book.mysqlnd-qc.  serves as a cache
backend. PECL/mysqlnd_qc supports use of various storage locations,
among others main memory, `APC' and `MEMCACHE'.

Feature changes

   * Added cache option to quality-of-service (QoS) filter.

        * New configure option `enable-mysqlnd-ms-cache-support'

        * New constant `MYSQLND_MS_HAVE_CACHE_SUPPORT'.

        * New constant `MYSQLND_MS_QOS_OPTION_CACHE' to be used with
          *Note `mysqlnd_ms_set_qos':
          apis-php-function.mysqlnd-ms-set-qos.

   * Support for built-in global transaction identifier feature of
     MySQL 5.6.5-m8 or newer.


File: manual.info,  Node: apis-php-mysqlnd-ms.changes-one-two,  Next: apis-php-mysqlnd-ms.changes-one-one,  Prev: apis-php-mysqlnd-ms.changes-one-three,  Up: apis-php-mysqlnd-ms.changes

22.9.2.52 PECL/mysqlnd_ms 1.2 series
....................................

Copyright 1997-2012 the PHP Documentation Group.

1.2.1-beta

   * Release date: 01/2012

   * Motto/theme: see 1.2.0-alpha

Minor test changes.

1.2.0-alpha

   * Release date: 11/2011

   * Motto/theme: Global Transaction ID injection and
     quality-of-service concept

In version 1.2 the focus continues to be on supporting MySQL database
clusters with asynchronous replication. The plugin tries to make using
the cluster introducing a quality-of-service filter which applications
can use to define what service quality they need from the cluster.
Service levels provided are eventual consistency with optional maximum
age/slave slag, session consistency and strong consistency.

Additionally the plugin can do client-side global transaction id
injection to make manual master failover easier.

Feature changes

   * Introduced quality-of-service (QoS) filter. Service levels
     provided by QoS filter:

        * eventual consistency, optional option slave lag

        * session consistency, optional option GTID

        * strong consistency

   * Added the *Note `mysqlnd_ms_set_qos':
     apis-php-function.mysqlnd-ms-set-qos.  function to set the
     required connection quality at runtime. The new constants related
     to *Note `mysqlnd_ms_set_qos':
     apis-php-function.mysqlnd-ms-set-qos.  are:

        * MYSQLND_MS_QOS_CONSISTENCY_STRONG

        * MYSQLND_MS_QOS_CONSISTENCY_SESSION

        * MYSQLND_MS_QOS_CONSISTENCY_EVENTUAL

        * MYSQLND_MS_QOS_OPTION_GTID

        * MYSQLND_MS_QOS_OPTION_AGE

   * Added client-side global transaction id injection (GTID).

   * New statistics related to GTID:

        * `gtid_autocommit_injections_success'

        * `gtid_autocommit_injections_failure'

        * `gtid_commit_injections_success'

        * `gtid_commit_injections_failure'

        * `gtid_implicit_commit_injections_success'

        * `gtid_implicit_commit_injections_failure'

   * Added *Note `mysqlnd_ms_get_last_gtid':
     apis-php-function.mysqlnd-ms-get-last-gtid.  to fetch the last
     global transaction id.

   * Enabled support for multi master without slaves.


File: manual.info,  Node: apis-php-mysqlnd-ms.changes-one-one,  Next: apis-php-mysqlnd-ms.changes-one-o,  Prev: apis-php-mysqlnd-ms.changes-one-two,  Up: apis-php-mysqlnd-ms.changes

22.9.2.53 PECL/mysqlnd_ms 1.1 series
....................................

Copyright 1997-2012 the PHP Documentation Group.

1.1.0

   * Release date: 09/2011

   * Motto/theme: Cover replication basics with production quality

The 1.1 and 1.0 series expose a similar feature set. Internally, the
1.1 series has been refactored to plan for future feature additions. A
new configuration file format has been introduced, and limitations have
been lifted. And the code quality and quality assurance has been
improved.

Feature changes

   * Added the (chainable) *Note filter concept:
     apis-php-mysqlnd-ms.filter.:

        * BC break: *Note `mysqlnd_ms_set_user_pick_server':
          apis-php-function.mysqlnd-ms-set-user-pick-server.  has been
          removed. Thehttp://svn.php.net/viewvc/pecl/mysqlnd_ms/trunk/
          *Note `user': apis-php-mysqlnd-ms.filter.  filter has been
          introduced to replace it.  The filter offers similar
          functionality, but see below for an explanation of the
          differences.

   * New powerful JSON based configuration syntax.

   * *Note Lazy connections improved: apis-php-mysqlnd-ms.pooling.:
     security relevant, and state changing commands are covered.

   * Support for (native) prepared statements.

   * New statistics: `use_master_guess', `use_slave_guess'.

        * BC break: Semantics of statistics changed for `use_slave',
          `use_master'.  Future changes are likely. Please see, *Note
          `mysqlnd_ms_get_stats':
          apis-php-function.mysqlnd-ms-get-stats.

   * List of broadcasted messages extended by `ssl_set'.

   * Library calls now monitored to remember settings for lazy
     connections: `change_user', `select_db', `set_charset',
     `set_autocommit'.

   * Introduced `mysqlnd_ms.disable_rw_split'.  The configuration
     setting allows using the load balancing and lazy connection
     functionality independently of read write splitting.

Bug fixes

   * Fixed PECL #22724 - Server switching (mysqlnd_ms_query_is_select()
     case sensitive)

   * Fixed PECL #22784 - Using mysql_connect and mysql_select_db did
     not work

   * Fixed PECL #59982 - Unusable extension with
     -enable-mysqlnd-ms-table-filter.  Use of the option is NOT
     supported. You must not used it. Added note to m4.

   * Fixed Bug #60119 - host="localhost" lost in
     mysqlnd_ms_get_last_used_connection()

The *Note `mysqlnd_ms_set_user_pick_server':
apis-php-function.mysqlnd-ms-set-user-pick-server.  function was
removed, and replaced in favor of a new `user' filter. You can no
longer set a callback function using *Note
`mysqlnd_ms_set_user_pick_server':
apis-php-function.mysqlnd-ms-set-user-pick-server.  at runtime, but
instead have to configure it in the plugins configuration file. The
`user' filter will pass the same arguments to the callback as before.
Therefore, you can continue to use the same procedural function as a
callback.callback It is no longer possible to use static class methods,
or class methods of an object instance, as a callback.  Doing so will
cause the function executing a statement handled by the plugin to emit
an

E_RECOVERABLE_ERROR

level error, which might look like: "`(mysqlnd_ms) Specified callback
(picker) is not a valid callback'." Note: this may halt your
application.


File: manual.info,  Node: apis-php-mysqlnd-ms.changes-one-o,  Prev: apis-php-mysqlnd-ms.changes-one-one,  Up: apis-php-mysqlnd-ms.changes

22.9.2.54 PECL/mysqlnd_ms 1.0 series
....................................

Copyright 1997-2012 the PHP Documentation Group.

1.0.1-alpha

   * Release date: 04/2011

   * Motto/theme: bug fix release

1.0.0-alpha

   * Release date: 04/2011

   * Motto/theme: Cover replication basics to test user feedback

The first release of practical use. It features basic automatic
read-write splitting, SQL hints to overrule automatic redirection, load
balancing of slave requests, lazy connections, and optional, automatic
use of the master after the first write.

The public feature set is close to that of the 1.1 release.

1.0.0-pre-alpha

   * Release date: 09/2010

   * Motto/theme: Proof of concept

Initial check-in. Essentially a demo of the See section
"apis-php-mysqli" in the online manual plugin API.


File: manual.info,  Node: apis-php-book.mysqlnd-qc,  Next: apis-php-book.mysqlnd-uh,  Prev: apis-php-book.mysqlnd-ms,  Up: apis-php

22.9.3 Mysqlnd query result cache plugin (`mysqlnd_qc')
-------------------------------------------------------

* Menu:

* apis-php-mysqlnd-qc.key-features::  Key Features
* apis-php-mysqlnd-qc.limitations::  Limitations
* apis-php-mysqlnd-qc.name::     On the name
* apis-php-mysqlnd-qc.quickstart::  Quickstart and Examples
* apis-php-mysqlnd-qc.setup::    Installing/Configuring
* apis-php-mysqlnd-qc.constants::  Predefined Constants
* apis-php-ref.mysqlnd-qc::      mysqlnd_qc Functions
* apis-php-mysqlnd-qc.changes::  Change History

Copyright 1997-2012 the PHP Documentation Group.

The mysqlnd query result cache plugin adds easy to use client-side
query caching to all PHP MySQL extensions using See section
"apis-php-mysqli" in the online manual.

As of version PHP 5.3.3 the MySQL native driver for PHP ( `mysqlnd')
features an internal plugin C API. C plugins, such as the query cache
plugin, can extend the functionality of See section "apis-php-mysqli"
in the online manual.

Mysqlnd plugins such as the query cache plugin operate transparent from
a user perspective. The cache plugin supports all PHP applications and
all PHP MySQL extensions ( mysqli, mysql, See section
"apis-php-ref.pdo-mysql" in the online manual). It does not change
existing APIs.

No significant application changes are required to cache a query.  The
cache has two operation modes. It will either cache all queries (not
recommended) or only those queries marked with a certain SQL hint
(recommended).


File: manual.info,  Node: apis-php-mysqlnd-qc.key-features,  Next: apis-php-mysqlnd-qc.limitations,  Prev: apis-php-book.mysqlnd-qc,  Up: apis-php-book.mysqlnd-qc

22.9.3.1 Key Features
.....................

Copyright 1997-2012 the PHP Documentation Group.

   * Transparent and therefore easy to use

        * supports all PHP MySQL extensions

        * no API changes

        * very little application changes required

   * Flexible invalidation strategy

        * Time-to-Live (TTL)

        * user-defined

   * Storage with different scope and life-span

        * Default (Hash, process memory)

        * APC (http://www.php.net/ref.apc)

        * MEMCACHE

        * sqlite

        * user-defined

   * Built-in slam defense to prevent cache stampeding.


File: manual.info,  Node: apis-php-mysqlnd-qc.limitations,  Next: apis-php-mysqlnd-qc.name,  Prev: apis-php-mysqlnd-qc.key-features,  Up: apis-php-book.mysqlnd-qc

22.9.3.2 Limitations
....................

Copyright 1997-2012 the PHP Documentation Group.

The current 1.0.1 release of PECL mysqlnd_qc does not support PHP 5.4.
Version 1.1.0-alpha lifts this limitation.

Prepared statements and unbuffered queries are fully supported.  Thus,
the plugin is capable of caching all statements issued with `mysqli' or
`PDO_MySQL', which are the only two PHP MySQL APIs to offer prepared
statement support.


File: manual.info,  Node: apis-php-mysqlnd-qc.name,  Next: apis-php-mysqlnd-qc.quickstart,  Prev: apis-php-mysqlnd-qc.limitations,  Up: apis-php-book.mysqlnd-qc

22.9.3.3 On the name
....................

Copyright 1997-2012 the PHP Documentation Group.

The shortcut `mysqlnd_qc' stands for `mysqlnd query cache plugin'. The
name was chosen for a quick-and-dirty proof-of-concept. In the
beginning the developers did not expect to continue using the code base.
Sometimes PECL/mysqlnd_qc has also been called `client-side query
result set cache'.


File: manual.info,  Node: apis-php-mysqlnd-qc.quickstart,  Next: apis-php-mysqlnd-qc.setup,  Prev: apis-php-mysqlnd-qc.name,  Up: apis-php-book.mysqlnd-qc

22.9.3.4 Quickstart and Examples
................................

* Menu:

* apis-php-mysqlnd-qc.quickstart.concepts::  Architecture and Concepts
* apis-php-mysqlnd-qc.quickstart.configuration::  Setup
* apis-php-mysqlnd-qc.quickstart.caching::  Caching queries
* apis-php-mysqlnd-qc.per-query-ttl::  Setting the TTL
* apis-php-mysqlnd-qc.pattern-based-caching::  Pattern based caching
* apis-php-mysqlnd-qc.slam-defense::  Slam defense
* apis-php-mysqlnd-qc.cache-candidates::  Finding cache candidates
* apis-php-mysqlnd-qc.cache-efficiency::  Measuring cache efficiency
* apis-php-mysqlnd-qc.set-user-handlers::  Beyond TTL: user-defined storage

Copyright 1997-2012 the PHP Documentation Group.

The mysqlnd query cache plugin is easy to use. This quickstart will
demo typical use-cases, and provide practical advice on getting started.

It is strongly recommended to read the reference sections in addition
to the quickstart. It is safe to begin with the quickstart. However,
before using the plugin in mission critical environments we urge you to
read additionally the background information from the reference
sections.

Most of the examples use the mysqli extension because it is the most
feature complete PHP MySQL extension.  However, the plugin can be used
with any PHP MySQL extension that is using the See section
"apis-php-mysqli" in the online manual library.


File: manual.info,  Node: apis-php-mysqlnd-qc.quickstart.concepts,  Next: apis-php-mysqlnd-qc.quickstart.configuration,  Prev: apis-php-mysqlnd-qc.quickstart,  Up: apis-php-mysqlnd-qc.quickstart

22.9.3.5 Architecture and Concepts
..................................

Copyright 1997-2012 the PHP Documentation Group.

The query cache plugin is implemented as a PHP extension. It is written
in C and operates under the hood of PHP. During the startup of the PHP
interpreter, it gets registered as a See section "apis-php-mysqli" in
the online manual plugin to replace selected mysqlnd C methods. Hereby,
it can change the behaviour of any PHP MySQL extension (mysqli, See
section "apis-php-ref.pdo-mysql" in the online manual, mysql) compiled
to use the mysqlnd library without changing the extensions API. This
makes the plugin compatible with each and every PHP MySQL application.
Because existing APIs are not changed, it is almost transparent to use.
Please, see the mysqlnd plugin API description for a discussion of the
advantages of the plugin architecture and a comparison with proxy based
solutions.

_Transparent to use_

At PHP run time PECL/mysqlnd_qc can proxy queries send from PHP (See
section "apis-php-mysqli" in the online manual) to the MySQL server. It
then inspects the statement string to find whether it shall cache its
results. If so, result set is cached using a storage handler and
further executions of the statement are served from the cache for a
user-defined period. The Time to Live (TTL) of the cache entry can
either be set globally or on a per statement basis.

A statement is either cached if the plugin is instructed to cache all
statements globally using a or, if the query string starts with the SQL
hint (`/*qc=on*/'). The plugin is capable of caching any query issued
by calling appropriate API calls of any of the existing PHP MySQL
extensions.

_Flexible storage: various storage handler_

Various storage handler are supported to offer different scopes for
cache entries. Different scopes allow for different degrees in sharing
cache entries among clients.

   * `default' (built-in): process memory, scope: process, one or more
     web requests depending on PHP deployment model used

   * `APC': shared memory, scope: single server, multiple web requests

   * `SQLite': memory or file, scope: single server, multiple web
     requests

   * `MEMCACHE': main memory, scope: single or multiple server,
     multiple web requests

   * `user' (built-in): user-defined - any, scope: user-defined - any

Support for the `APC', `SQLite' and ` MEMCACHE' storage handler has to
be enabled at compile time. The ` default' and `user' handler are
built-in. It is possible to switch between compiled-in storage handlers
on a per query basis at run time. However, it is recommended to pick
one storage handler and use it for all cache entries.

_Built-in slam defense to avoid overloading_

To avoid overload situations the cache plugin has a built-in slam
defense mechanism. If a popular cache entries expires many clients
using the cache entries will try to refresh the cache entry. For the
duration of the refresh many clients may access the database server
concurrently. In the worst case, the database server becomes overloaded
and it takes more and more time to refresh the cache entry, which in
turn lets more and more clients try to refresh the cache entry. To
prevent this from happening the plugin has a slam defense mechanism. If
slam defense is enabled and the plugin detects an expired cache entry
it extends the life time of the cache entry before it refreshes the
cache entry. This way other concurrent accesses to the expired cache
entry are still served from the cache for a certain time. The other
concurrent accesses to not trigger a concurrent refresh. Ideally, the
cache entry gets refreshed by the client which extended the cache
entries lifespan before other clients try to refresh the cache and
potentially cause an overload situation.

_Unique approach to caching_

PECL/mysqlnd_qc has a unique approach to caching result sets that is
superior to application based cache solutions.  Application based
solutions first fetch a result set into PHP variables. Then, the PHP
variables are serialized for storage in a persistent cache, and then
unserialized when fetching. The mysqlnd query cache stores the raw wire
protocol data sent from MySQL to PHP in its cache and replays it, if
still valid, on a cache hit. This way, it saves an extra serialization
step for a cache put that all application based solutions have to do. It
can store the raw wire protocol data in the cache without having to
serialize into a PHP variable first and deserializing the PHP variable
for storing in the cache again.


File: manual.info,  Node: apis-php-mysqlnd-qc.quickstart.configuration,  Next: apis-php-mysqlnd-qc.quickstart.caching,  Prev: apis-php-mysqlnd-qc.quickstart.concepts,  Up: apis-php-mysqlnd-qc.quickstart

22.9.3.6 Setup
..............

Copyright 1997-2012 the PHP Documentation Group.

The plugin is implemented as a PHP extension. See also the *Note
installation instructions: apis-php-mysqlnd-qc.installation. to install
the PECL/mysqlnd_qc (http://pecl.php.net/package/mysqlnd_qc) extension.

Compile or configure the PHP MySQL extension (mysqli, See section
"apis-php-ref.pdo-mysql" in the online manual, mysql) that you plan to
use with support for the See section "apis-php-mysqli" in the online
manual library.  PECL/mysqlnd_qc is a plugin for the mysqlnd library.
To use the plugin with any of the existing PHP MySQL extensions (APIs),
the extension has to use the mysqlnd library.

Then, load the extension into PHP and activate the plugin in the PHP
configuration file using the PHP configuration directive named
mysqlnd_qc.enable_qc.


     mysqlnd_qc.enable_qc=1


File: manual.info,  Node: apis-php-mysqlnd-qc.quickstart.caching,  Next: apis-php-mysqlnd-qc.per-query-ttl,  Prev: apis-php-mysqlnd-qc.quickstart.configuration,  Up: apis-php-mysqlnd-qc.quickstart

22.9.3.7 Caching queries
........................

Copyright 1997-2012 the PHP Documentation Group.

There are four ways to trigger caching of a query.

   * Use of SQL hints on a per query basis

   * User supplied callbacks to decide on a per query basis, for
     example, using `mysqlnd_qc_is_select'
     (http://www.php.net/mysqlnd_qc_is_select)

   * `mysqlnd_set_cache_condition'
     (http://www.php.net/mysqlnd_set_cache_condition) for rule based
     automatic per query decisions

   * `*Note mysqlnd_qc.cache_by_default = 1:
     apis-php-mysqlnd-qc.configuration.' to cache all queries blindly

Use of SQL hints and `*Note mysqlnd_qc.cache_by_default = 1:
apis-php-mysqlnd-qc.configuration.' are explained below. Please, refer
to the function reference on `mysqlnd_qc_is_select'
(http://www.php.net/mysqlnd_qc_is_select) for a description of using a
callback and, *Note `mysqlnd_qc_set_cache_condition':
apis-php-function.mysqlnd-qc-set-cache-condition.  on how to set rules
for automatic caching.

A SQL hint is a SQL standards compliant comment. As a SQL comment it is
ignored by the database. A statement is considered eligible for caching
if it either begins with the SQL hint enabling caching or it is a
`SELECT' statement.

An individual query which shall be cached must begin with the SQL hint
`/*qc=on*/'. It is recommended to use the PHP constant `*Note
MYSQLND_QC_ENABLE_SWITCH: apis-php-mysqlnd-qc.constants.' instead of
using the string value.

   * not eligible for caching and not cached: `INSERT INTO test(id)
     VALUES (1)'

   * not eligible for caching and not cached: `SHOW ENGINES'

   * eligible for caching but uncached: `SELECT id FROM test'

   * eligible for caching and cached: `/*qc=on*/SELECT id FROM test'

The examples `SELECT' statement string is prefixed with the `*Note
MYSQLND_QC_ENABLE_SWITCH: apis-php-mysqlnd-qc.constants.' SQL hint to
enable caching of the statement. The SQL hint must be given at the very
beginning of the statement string to enable caching.


     mysqlnd_qc.enable_qc=1


     <?php
     /* Connect, create and populate test table */
     $mysqli = new mysqli("host", "user", "password", "schema", "port", "socket");
     $mysqli->query("DROP TABLE IF EXISTS test");
     $mysqli->query("CREATE TABLE test(id INT)");
     $mysqli->query("INSERT INTO test(id) VALUES (1), (2)");

     /* Will be cached because of the SQL hint */
     $start = microtime(true);
     $res   = $mysqli->query("/*" . MYSQLND_QC_ENABLE_SWITCH . "*/" . "SELECT id FROM test WHERE id = 1");

     var_dump($res->fetch_assoc());
     $res->free();

     printf("Total time uncached query: %.6fs\n", microtime(true) - $start);

     /* Cache hit */
     $start = microtime(true);
     $res   = $mysqli->query("/*" . MYSQLND_QC_ENABLE_SWITCH . "*/" . "SELECT id FROM test WHERE id = 1");

     var_dump($res->fetch_assoc());
     $res->free();

     printf("Total time cached query: %.6fs\n", microtime(true) - $start);
     ?>

The above examples will output something similar to:


     array(1) {
       ["id"]=>
       string(1) "1"
     }
     Total time uncached query: 0.000740s
     array(1) {
       ["id"]=>
       string(1) "1"
     }
     Total time cached query: 0.000098s

If nothing else is configured, as it is the case in the quickstart
example, the plugin will use the built-in `default' storage handler. The
`default' storage handler uses process memory to hold a cache entry.
Depending on the PHP deployment model, a PHP process may serve one or
more web requests. Please, consult the web server manual for details.
Details make no difference for the examples given in the quickstart.

The query cache plugin will cache all queries regardless if the query
string begins with the SQL hint which enables caching or not, if the
PHP configuration directive `*Note mysqlnd_qc.cache_by_default:
apis-php-mysqlnd-qc.configuration.' is set to `1'. The setting `*Note
mysqlnd_qc.cache_by_default: apis-php-mysqlnd-qc.configuration.' is
evaluated by the core of the query cache plugins. Neither the built-in
nor user-defined storage handler can overrule the setting.

The SQL hint `/*qc=off*/' can be used to disable caching of individual
queries if `*Note mysqlnd_qc.cache_by_default = 1:
apis-php-mysqlnd-qc.configuration.' It is recommended to use the PHP
constant `*Note MYSQLND_QC_DISABLE_SWITCH:
apis-php-mysqlnd-qc.constants.' instead of using the string value.


     mysqlnd_qc.enable_qc=1
     mysqlnd_qc.cache_by_default=1


     <?php
     /* Connect, create and populate test table */
     $mysqli = new mysqli("host", "user", "password", "schema", "port", "socket");
     $mysqli->query("DROP TABLE IF EXISTS test");
     $mysqli->query("CREATE TABLE test(id INT)");
     $mysqli->query("INSERT INTO test(id) VALUES (1), (2)");

     /* Will be cached although no SQL hint is present because of mysqlnd_qc.cache_by_default = 1*/
     $res = $mysqli->query("SELECT id FROM test WHERE id = 1");
     var_dump($res->fetch_assoc());
     $res->free();

     $mysqli->query("DELETE FROM test WHERE id = 1");

     /* Cache hit - no automatic invalidation and still valid! */
     $res = $mysqli->query("SELECT id FROM test WHERE id = 1");
     var_dump($res->fetch_assoc());
     $res->free();

     /* Cache miss - query must not be cached because of the SQL hint */
     $res = $mysqli->query("/*" . MYSQLND_QC_DISABLE_SWITCH . "*/SELECT id FROM test WHERE id = 1");
     var_dump($res->fetch_assoc());
     $res->free();
     ?>

The above examples will output:


     array(1) {
       ["id"]=>
       string(1) "1"
     }
     array(1) {
       ["id"]=>
       string(1) "1"
     }
     NULL

PECL/mysqlnd_qc forbids caching of statements for which at least one
column from the statements result set shows no table name in its meta
data by default. This is usually the case for columns originating from
SQL functions such as `NOW()' or `LAST_INSERT_ID()'. The policy aims to
prevent pitfalls if caching by default is used.


     mysqlnd_qc.enable_qc=1
     mysqlnd_qc.cache_by_default=1


     <?php
     /* Connect, create and populate test table */
     $mysqli = new mysqli("host", "user", "password", "schema", "port", "socket");
     $mysqli->query("DROP TABLE IF EXISTS test");
     $mysqli->query("CREATE TABLE test(id INT)");
     $mysqli->query("INSERT INTO test(id) VALUES (1)");

     for ($i = 0; $i < 3; $i++) {

         $start = microtime(true);

         /* Note: statement will not be cached because of NOW() use */
         $res = $mysqli->query("SELECT id, NOW() AS _time FROM test");
         $row = $res->fetch_assoc();

         /* dump results */
         var_dump($row);

         printf("Total time: %.6fs\n", microtime(true) - $start);

         /* pause one second */
         sleep(1);
     }
     ?>

The above examples will output something similar to:


     array(2) {
       ["id"]=>
       string(1) "1"
       ["_time"]=>
       string(19) "2012-01-11 15:43:10"
     }
     Total time: 0.000540s
     array(2) {
       ["id"]=>
       string(1) "1"
       ["_time"]=>
       string(19) "2012-01-11 15:43:11"
     }
     Total time: 0.000555s
     array(2) {
       ["id"]=>
       string(1) "1"
       ["_time"]=>
       string(19) "2012-01-11 15:43:12"
     }
     Total time: 0.000549s

It is possible to enable caching for all statements including those
which has columns in their result set for which MySQL reports no table,
such as the statement from the example. Set `mysqlnd_qc.cache_no_table
= 1' to enable caching of such statements.  Please, note the difference
in the measured times for the above and below examples.


     mysqlnd_qc.enable_qc=1
     mysqlnd_qc.cache_by_default=1
     mysqlnd_qc.cache_no_table=1


     <?php
     /* Connect, create and populate test table */
     $mysqli = new mysqli("host", "user", "password", "schema", "port", "socket");
     $mysqli->query("DROP TABLE IF EXISTS test");
     $mysqli->query("CREATE TABLE test(id INT)");
     $mysqli->query("INSERT INTO test(id) VALUES (1)");

     for ($i = 0; $i < 3; $i++) {

         $start = microtime(true);

         /* Note: statement will not be cached because of NOW() use */
         $res = $mysqli->query("SELECT id, NOW() AS _time FROM test");
         $row = $res->fetch_assoc();

         /* dump results */
         var_dump($row);

         printf("Total time: %.6fs\n", microtime(true) - $start);

         /* pause one second */
         sleep(1);
     }
     ?>

The above examples will output something similar to:


     array(2) {
       ["id"]=>
       string(1) "1"
       ["_time"]=>
       string(19) "2012-01-11 15:47:45"
     }
     Total time: 0.000546s
     array(2) {
       ["id"]=>
       string(1) "1"
       ["_time"]=>
       string(19) "2012-01-11 15:47:45"
     }
     Total time: 0.000187s
     array(2) {
       ["id"]=>
       string(1) "1"
       ["_time"]=>
       string(19) "2012-01-11 15:47:45"
     }
     Total time: 0.000167s

*Note*:

Although `mysqlnd_qc.cache_no_table = 1' has been created for use with
`*Note mysqlnd_qc.cache_by_default = 1:
apis-php-mysqlnd-qc.configuration.' it is bound it. The plugin will
evaluate the `mysqlnd_qc.cache_no_table' whenever a query is to be
cached, no matter whether caching has been enabled using a SQL hint or
any other measure.


File: manual.info,  Node: apis-php-mysqlnd-qc.per-query-ttl,  Next: apis-php-mysqlnd-qc.pattern-based-caching,  Prev: apis-php-mysqlnd-qc.quickstart.caching,  Up: apis-php-mysqlnd-qc.quickstart

22.9.3.8 Setting the TTL
........................

Copyright 1997-2012 the PHP Documentation Group.

The default invalidation strategy of the query cache plugin is Time to
Live (`TTL'). The built-in storage handlers will use the default `TTL'
defined by the PHP configuration value `*Note mysqlnd_qc.ttl:
apis-php-mysqlnd-qc.configuration.' unless the query string contains a
hint for setting a different `TTL'. The `TTL' is specified in seconds.
By default cache entries expire after `30' seconds

The example sets `mysqlnd_qc.ttl=3' to cache statements for three
seconds by default. Every second it updates a database table record to
hold the current time and executes a `SELECT' statement to fetch the
record from the database. The `SELECT' statement is cached for three
seconds because it is prefixed with the SQL hint enabling caching. The
output verifies that the query results are taken from the cache for the
duration of three seconds before they are refreshed.


     mysqlnd_qc.enable_qc=1
     mysqlnd_qc.ttl=3


     <?php
     /* Connect, create and populate test table */
     $mysqli = new mysqli("host", "user", "password", "schema", "port", "socket");
     $mysqli->query("DROP TABLE IF EXISTS test");
     $mysqli->query("CREATE TABLE test(id VARCHAR(255))");

     for ($i = 0; $i < 7; $i++) {

         /* update DB row  */
         if (!$mysqli->query("DELETE FROM test") ||
             !$mysqli->query("INSERT INTO test(id) VALUES (NOW())"))
           /* Of course, a real-life script should do better error handling */
           die(sprintf("[%d] %s\n", $mysqli->errno, $mysqli->error));

         /* select latest row but cache results */
         $query  = "/*" . MYSQLND_QC_ENABLE_SWITCH . "*/";
         $query .= "SELECT id AS _time FROM test";
         if (!($res = $mysqli->query($query)) ||
             !($row = $res->fetch_assoc()))
         {
           printf("[%d] %s\n", $mysqli->errno, $mysqli->error);
         }
         $res->free();
         printf("Wall time %s - DB row time %s\n", date("H:i:s"), $row['_time']);

         /* pause one second */
         sleep(1);
     }
     ?>

The above examples will output something similar to:


     Wall time 14:55:59 - DB row time 2012-01-11 14:55:59
     Wall time 14:56:00 - DB row time 2012-01-11 14:55:59
     Wall time 14:56:01 - DB row time 2012-01-11 14:55:59
     Wall time 14:56:02 - DB row time 2012-01-11 14:56:02
     Wall time 14:56:03 - DB row time 2012-01-11 14:56:02
     Wall time 14:56:04 - DB row time 2012-01-11 14:56:02
     Wall time 14:56:05 - DB row time 2012-01-11 14:56:05

As can be seen from the example, any `TTL' based cache can serve stale
data. Cache entries are not automatically invalidated, if underlying
data changes.  Applications using the default `TTL' invalidation
strategy must be able to work correctly with stale data.

A user-defined cache storage handler can implement any invalidation
strategy to work around this limitation.

The default `TTL' can be overruled using the SQL hint
`/*qc_tt=seconds*/'. The SQL hint must be appear immediately after the
SQL hint which enables caching.  It is recommended to use the PHP
constant `*Note MYSQLND_QC_TTL_SWITCH: apis-php-mysqlnd-qc.constants.'
instead of using the string value.


     <?php
     $start = microtime(true);

     /* Connect, create and populate test table */
     $mysqli = new mysqli("host", "user", "password", "schema", "port", "socket");
     $mysqli->query("DROP TABLE IF EXISTS test");
     $mysqli->query("CREATE TABLE test(id INT)");
     $mysqli->query("INSERT INTO test(id) VALUES (1), (2)");

     printf("Default TTL\t: %d seconds\n", ini_get("mysqlnd_qc.ttl"));

     /* Will be cached for 2 seconds */
     $sql = sprintf("/*%s*//*%s%d*/SELECT id FROM test WHERE id = 1", MYSQLND_QC_ENABLE_SWITCH, MYSQLND_QC_TTL_SWITCH, 2);
     $res = $mysqli->query($sql);

     var_dump($res->fetch_assoc());
     $res->free();

     $mysqli->query("DELETE FROM test WHERE id = 1");
     sleep(1);

     /* Cache hit - no automatic invalidation and still valid! */
     $res = $mysqli->query($sql);
     var_dump($res->fetch_assoc());
     $res->free();

     sleep(2);

     /* Cache miss - cache entry has expired */
     $res = $mysqli->query($sql);
     var_dump($res->fetch_assoc());
     $res->free();

     printf("Script runtime\t: %d seconds\n", microtime(true) - $start);
     ?>

The above examples will output something similar to:


     Default TTL     : 30 seconds
     array(1) {
       ["id"]=>
       string(1) "1"
     }
     array(1) {
       ["id"]=>
       string(1) "1"
     }
     NULL
     Script runtime  : 3 seconds


File: manual.info,  Node: apis-php-mysqlnd-qc.pattern-based-caching,  Next: apis-php-mysqlnd-qc.slam-defense,  Prev: apis-php-mysqlnd-qc.per-query-ttl,  Up: apis-php-mysqlnd-qc.quickstart

22.9.3.9 Pattern based caching
..............................

Copyright 1997-2012 the PHP Documentation Group.

An application has three options for telling PECL/mysqlnd_qc whether a
particular statement shall be used. The most basic approach is to cache
all statements by setting `*Note mysqlnd_qc.cache_by_default = 1:
apis-php-mysqlnd-qc.configuration.'. This approach is often of little
practical value. But it enables users to make a quick estimation about
the maximum performance gains from caching. An application designed to
use a cache may be able to prefix selected statements with the
appropriate SQL hints.  However, altering an applications source code
may not always be possible or desired, for example, to avoid problems
with software updates. Therefore, PECL/mysqlnd_qc allows setting a
callback which decides if a query is to be cached.

The callback is installed with the *Note `mysqlnd_qc_set_is_select':
apis-php-function.mysqlnd-qc-set-is-select.  function. The callback is
given the statement string of every statement inspected by the plugin.
Then, the callback can decide whether to cache the function. The
callback is supposed to return

FALSE

if the statement shall not be cached. A return value of

TRUE

makes the plugin try to add the statement into the cache. The cache
entry will be given the default TTL (`*Note mysqlnd_qc.ttl:
apis-php-mysqlnd-qc.configuration.'). If the callback returns a
numerical value it is used as the TTL instead of the global default.


     mysqlnd_qc.enable_qc=1
     mysqlnd_qc.collect_statistics=1


     <?php
     /* callback which decides if query is cached */
     function is_select($query) {
         static $patterns = array(
           /* true - use default from mysqlnd_qc.ttl */
           "@SELECT\s+.*\s+FROM\s+test@ismU" => true,
           /* 3 - use TTL = 3 seconds */
           "@SELECT\s+.*\s+FROM\s+news@ismU" => 3
         );

         /* check if query does match pattern */
         foreach ($patterns as $pattern => $ttl) {
             if (preg_match($pattern, $query)) {
                 printf("is_select(%45s): cache\n", $query);
                 return $ttl;
             }
         }
         printf("is_select(%45s): do not cache\n", $query);
         return false;
     }
     /* install callback */
     mysqlnd_qc_set_is_select("is_select");

     /* Connect, create and populate test table */
     $mysqli = new mysqli("host", "user", "password", "schema", "port", "socket");
     $mysqli->query("DROP TABLE IF EXISTS test");
     $mysqli->query("CREATE TABLE test(id INT)");
     $mysqli->query("INSERT INTO test(id) VALUES (1), (2), (3)");

     /* cache put */
     $mysqli->query("SELECT id FROM test WHERE id = 1");
     /* cache hit */
     $mysqli->query("SELECT id FROM test WHERE id = 1");
     /* cache put */
     $mysqli->query("SELECT * FROM test");

     $stats = mysqlnd_qc_get_core_stats();
     printf("Cache put: %d\n", $stats['cache_put']);
     printf("Cache hit: %d\n", $stats['cache_hit']);
     ?>

The above examples will output something similar to:


     is_select(                    DROP TABLE IF EXISTS test): do not cache
     is_select(                    CREATE TABLE test(id INT)): do not cache
     is_select(    INSERT INTO test(id) VALUES (1), (2), (3)): do not cache
     is_select(             SELECT id FROM test WHERE id = 1): cache
     is_select(             SELECT id FROM test WHERE id = 1): cache
     is_select(                           SELECT * FROM test): cache
     Cache put: 2
     Cache hit: 1

The examples callback tests if a statement string matches a pattern. If
this is the case, it either returns

TRUE

to cache the statement using the global default TTL or an alternative
TTL.

To minimize application changes the callback can put into and
registered in an auto prepend file.


File: manual.info,  Node: apis-php-mysqlnd-qc.slam-defense,  Next: apis-php-mysqlnd-qc.cache-candidates,  Prev: apis-php-mysqlnd-qc.pattern-based-caching,  Up: apis-php-mysqlnd-qc.quickstart

22.9.3.10 Slam defense
......................

Copyright 1997-2012 the PHP Documentation Group.

A badly designed cache can do more harm than good. In the worst case a
cache can increase database server load instead of minimizing it. An
overload situation can occur if a highly shared cache entry expires
(cache stampeding).

Cache entries are shared and reused to a different degree depending on
the storage used. The default storage handler stores cache entries in
process memory. Thus, a cache entry can be reused for the life-span of
a process. Other PHP processes cannot access it. If Memcache is used, a
cache entry can be shared among multiple PHP processes and even among
multiple machines, depending on the set up being used.

If a highly shared cache entry stored, for example, in Memcache
expires, many clients gets a cache miss. Many client requests can no
longer be served from the cache but try to run the underlying query on
the database server. Until the cache entry is refreshed, more and more
clients contact the database server.  In the worst case, a total lost
of service is the result.

The overload can be avoided using a storage handler which limits the
reuse of cache entries to few clients. Then, at the average, its likely
that only a limited number of clients will try to refresh a cache entry
concurrently.

Additionally, the built-in slam defense mechanism can and should be
used. If slam defense is activated an expired cache entry is given an
extended life time. The first client getting a cache miss for the
expired cache entry tries to refresh the cache entry within the
extended life time. All other clients requesting the cache entry are
temporarily served from the cache although the original `TTL' of the
cache entry has expired. The other clients will not experience a cache
miss before the extended life time is over.


     mysqlnd_qc.slam_defense=1
     mysqlnd_qc.slam_defense_ttl=1

The slam defense mechanism is enabled with the PHP configuration
directive `mysqlnd_qc.slam_defense'.  The extended life time of a cache
entry is set with `mysqlnd_qc.slam_defense_ttl'.

The function *Note `mysqlnd_qc_get_core_stats':
apis-php-function.mysqlnd-qc-get-core-stats.  returns an array of
statistics. The statistics `slam_stale_refresh' and `slam_stale_hit'
are incremented if slam defense takes place.

It is not possible to give a one-fits-all recommendation on the slam
defense configuration. Users are advised to monitor and test their
setup and derive settings accordingly.


File: manual.info,  Node: apis-php-mysqlnd-qc.cache-candidates,  Next: apis-php-mysqlnd-qc.cache-efficiency,  Prev: apis-php-mysqlnd-qc.slam-defense,  Up: apis-php-mysqlnd-qc.quickstart

22.9.3.11 Finding cache candidates
..................................

Copyright 1997-2012 the PHP Documentation Group.

A statement should be considered for caching if it is executed often
and has a long run time. Cache candidates are found by creating a list
of statements sorted by the product of the number of executions
multiplied by the statements run time. The function *Note
`mysqlnd_qc_get_query_trace_log':
apis-php-function.mysqlnd-qc-get-query-trace-log.  returns a query log
which help with the task.

Collecting a query trace is a slow operation. Thus, it is disabled by
default. The PHP configuration directive
`mysqlnd_qc.collect_query_trace' is used to enable it. The functions
trace contains one entry for every query issued before the function is
called.


     mysqlnd_qc.enable_qc=1
     mysqlnd_qc.collect_query_trace=1


     <?php
     /* connect to MySQL */
     $mysqli = new mysqli("host", "user", "password", "schema", "port", "socket");

     /* dummy queries to fill the query trace */
     for ($i = 0; $i < 2; $i++) {
         $res = $mysqli->query("SELECT 1 AS _one FROM DUAL");
         $res->free();
     }

     /* dump trace */
     var_dump(mysqlnd_qc_get_query_trace_log());
     ?>

The above examples will output:


     array(2) {
       [0]=>
       array(8) {
         ["query"]=>
         string(26) "SELECT 1 AS _one FROM DUAL"
         ["origin"]=>
         string(102) "#0 qc.php(7): mysqli->query('SELECT 1 AS _on...')
     #1 {main}"
         ["run_time"]=>
         int(0)
         ["store_time"]=>
         int(25)
         ["eligible_for_caching"]=>
         bool(false)
         ["no_table"]=>
         bool(false)
         ["was_added"]=>
         bool(false)
         ["was_already_in_cache"]=>
         bool(false)
       }
       [1]=>
       array(8) {
         ["query"]=>
         string(26) "SELECT 1 AS _one FROM DUAL"
         ["origin"]=>
         string(102) "#0 qc.php(7): mysqli->query('SELECT 1 AS _on...')
     #1 {main}"
         ["run_time"]=>
         int(0)
         ["store_time"]=>
         int(8)
         ["eligible_for_caching"]=>
         bool(false)
         ["no_table"]=>
         bool(false)
         ["was_added"]=>
         bool(false)
         ["was_already_in_cache"]=>
         bool(false)
       }
     }

Assorted information is given in the trace. Among them timings and the
origin of the query call. The origin property holds a code backtrace to
identify the source of the query. The depth of the backtrace can be
limited with the PHP configuration directive
`mysqlnd_qc.query_trace_bt_depth'.  The default depth is `3'.


     mysqlnd_qc.enable_qc=1
     mysqlnd_qc.collect_query_trace=1


     <?php
     /* connect to MySQL */
     $mysqli = new mysqli("host", "user", "password", "schema", "port", "socket");
     $mysqli->query("DROP TABLE IF EXISTS test");
     $mysqli->query("CREATE TABLE test(id INT)");
     $mysqli->query("INSERT INTO test(id) VALUES (1), (2), (3)");

     /* dummy queries to fill the query trace */
     for ($i = 0; $i < 3; $i++) {
         $res = $mysqli->query("SELECT id FROM test WHERE id = " . $mysqli->real_escape_string($i));
         $res->free();
     }

     $trace = mysqlnd_qc_get_query_trace_log();
     $summary = array();
     foreach ($trace as $entry) {
         if (!isset($summary[$entry['query']])) {
             $summary[$entry['query']] = array(
                 "executions" => 1,
                 "time"       => $entry['run_time'] + $entry['store_time'],
             );
         } else {
             $summary[$entry['query']]['executions']++;
             $summary[$entry['query']]['time'] += $entry['run_time'] + $entry['store_time'];
         }
     }

     foreach ($summary as $query => $details) {
         printf("%45s: %5dms (%dx)\n",
         $query, $details['time'], $details['executions']);
     }
     ?>

The above examples will output something similar to:


                         DROP TABLE IF EXISTS test:     0ms (1x)
                         CREATE TABLE test(id INT):     0ms (1x)
         INSERT INTO test(id) VALUES (1), (2), (3):     0ms (1x)
                  SELECT id FROM test WHERE id = 0:    25ms (1x)
                  SELECT id FROM test WHERE id = 1:    10ms (1x)
                  SELECT id FROM test WHERE id = 2:     9ms (1x)


File: manual.info,  Node: apis-php-mysqlnd-qc.cache-efficiency,  Next: apis-php-mysqlnd-qc.set-user-handlers,  Prev: apis-php-mysqlnd-qc.cache-candidates,  Up: apis-php-mysqlnd-qc.quickstart

22.9.3.12 Measuring cache efficiency
....................................

Copyright 1997-2012 the PHP Documentation Group.

PECL/mysqlnd_qc offers three ways to measure the cache efficiency. The
function *Note `mysqlnd_qc_get_normalized_query_trace_log':
apis-php-function.mysqlnd-qc-get-normalized-query-trace-log.  returns
statistics aggregated by the normalized query string, *Note
`mysqlnd_qc_get_cache_info':
apis-php-function.mysqlnd-qc-get-cache-info.  gives storage handler
specific information which includes a list of all cached items,
depending on the storage handler.  Additionally, the core of
PECL/mysqlnd_qc collects high-level summary statistics aggregated per
PHP process. The high-level statistics are returned by *Note
`mysqlnd_qc_get_core_stats':
apis-php-function.mysqlnd-qc-get-core-stats.

The functions *Note `mysqlnd_qc_get_normalized_query_trace_log':
apis-php-function.mysqlnd-qc-get-normalized-query-trace-log.  and *Note
`mysqlnd_qc_get_core_stats':
apis-php-function.mysqlnd-qc-get-core-stats.  will not collect data
unless data collection has been enabled through their corresponding PHP
configuration directives. Data collection is disabled by default for
performance considerations. It is configurable with the
mysqlnd_qc.time_statistics option, which determines if timing
information should be collected. Collection of time statistics is
enabled by default but only performed if data collection as such has
been enabled.  Recording time statistics causes extra system calls. In
most cases, the benefit of the monitoring outweighs any potential
performance penalty of the additional system calls.


     mysqlnd_qc.enable_qc=1
     mysqlnd_qc.collect_statistics=1


     <?php
     /* connect to MySQL */
     $mysqli = new mysqli("host", "user", "password", "schema", "port", "socket");
     $mysqli->query("DROP TABLE IF EXISTS test");
     $mysqli->query("CREATE TABLE test(id INT)");
     $mysqli->query("INSERT INTO test(id) VALUES (1), (2), (3)");

     /* dummy queries */
     for ($i = 1; $i <= 4; $i++) {
         $query = sprintf("/*%s*/SELECT id FROM test WHERE id = %d", MYSQLND_QC_ENABLE_SWITCH, $i % 2);
         $res   = $mysqli->query($query);

         $res->free();
     }

     var_dump(mysqlnd_qc_get_core_stats());
     ?>

The above examples will output something similar to:


     array(26) {
       ["cache_hit"]=>
       string(1) "2"
       ["cache_miss"]=>
       string(1) "2"
       ["cache_put"]=>
       string(1) "2"
       ["query_should_cache"]=>
       string(1) "4"
       ["query_should_not_cache"]=>
       string(1) "3"
       ["query_not_cached"]=>
       string(1) "3"
       ["query_could_cache"]=>
       string(1) "4"
       ["query_found_in_cache"]=>
       string(1) "2"
       ["query_uncached_other"]=>
       string(1) "0"
       ["query_uncached_no_table"]=>
       string(1) "0"
       ["query_uncached_no_result"]=>
       string(1) "0"
       ["query_uncached_use_result"]=>
       string(1) "0"
       ["query_aggr_run_time_cache_hit"]=>
       string(2) "28"
       ["query_aggr_run_time_cache_put"]=>
       string(3) "900"
       ["query_aggr_run_time_total"]=>
       string(3) "928"
       ["query_aggr_store_time_cache_hit"]=>
       string(2) "14"
       ["query_aggr_store_time_cache_put"]=>
       string(2) "40"
       ["query_aggr_store_time_total"]=>
       string(2) "54"
       ["receive_bytes_recorded"]=>
       string(3) "136"
       ["receive_bytes_replayed"]=>
       string(3) "136"
       ["send_bytes_recorded"]=>
       string(2) "84"
       ["send_bytes_replayed"]=>
       string(2) "84"
       ["slam_stale_refresh"]=>
       string(1) "0"
       ["slam_stale_hit"]=>
       string(1) "0"
       ["request_counter"]=>
       int(1)
       ["process_hash"]=>
       int(1929695233)
     }

For a quick overview, call *Note `mysqlnd_qc_get_core_stats':
apis-php-function.mysqlnd-qc-get-core-stats.  It delivers cache usage,
cache timing and traffic related statistics. Values are aggregated on a
per process basis for all queries issued by any PHP MySQL API call.

Some storage handler, such as the default handler, can report cache
entries, statistics related to the entries and meta data for the
underlying query through the *Note `mysqlnd_qc_get_cache_info':
apis-php-function.mysqlnd-qc-get-cache-info.  function. Please note,
that the information returned depends on the storage handler. Values
are aggregated on a per process basis.


     mysqlnd_qc.enable_qc=1


     <?php
     /* connect to MySQL */
     $mysqli = new mysqli("host", "user", "password", "schema", "port", "socket");
     $mysqli->query("DROP TABLE IF EXISTS test");
     $mysqli->query("CREATE TABLE test(id INT)");
     $mysqli->query("INSERT INTO test(id) VALUES (1), (2), (3)");

     /* dummy queries to fill the query trace */
     for ($i = 1; $i <= 4; $i++) {
         $query = sprintf("/*%s*/SELECT id FROM test WHERE id = %d", MYSQLND_QC_ENABLE_SWITCH, $i % 2);
         $res   = $mysqli->query($query);

         $res->free();
     }

     var_dump(mysqlnd_qc_get_cache_info());
     ?>

The above examples will output something similar to:


     array(4) {
       ["num_entries"]=>
       int(2)
       ["handler"]=>
       string(7) "default"
       ["handler_version"]=>
       string(5) "1.0.0"
       ["data"]=>
       array(2) {
         ["Localhost via UNIX socket
     3306
     root
     test|/*qc=on*/SELECT id FROM test WHERE id = 1"]=>
         array(2) {
           ["statistics"]=>
           array(11) {
             ["rows"]=>
             int(1)
             ["stored_size"]=>
             int(71)
             ["cache_hits"]=>
             int(1)
             ["run_time"]=>
             int(391)
             ["store_time"]=>
             int(27)
             ["min_run_time"]=>
             int(16)
             ["max_run_time"]=>
             int(16)
             ["min_store_time"]=>
             int(8)
             ["max_store_time"]=>
             int(8)
             ["avg_run_time"]=>
             int(8)
             ["avg_store_time"]=>
             int(4)
           }
           ["metadata"]=>
           array(1) {
             [0]=>
             array(8) {
               ["name"]=>
               string(2) "id"
               ["orig_name"]=>
               string(2) "id"
               ["table"]=>
               string(4) "test"
               ["orig_table"]=>
               string(4) "test"
               ["db"]=>
               string(4) "test"
               ["max_length"]=>
               int(1)
               ["length"]=>
               int(11)
               ["type"]=>
               int(3)
             }
           }
         }
         ["Localhost via UNIX socket
     3306
     root
     test|/*qc=on*/SELECT id FROM test WHERE id = 0"]=>
         array(2) {
           ["statistics"]=>
           array(11) {
             ["rows"]=>
             int(0)
             ["stored_size"]=>
             int(65)
             ["cache_hits"]=>
             int(1)
             ["run_time"]=>
             int(299)
             ["store_time"]=>
             int(13)
             ["min_run_time"]=>
             int(11)
             ["max_run_time"]=>
             int(11)
             ["min_store_time"]=>
             int(6)
             ["max_store_time"]=>
             int(6)
             ["avg_run_time"]=>
             int(5)
             ["avg_store_time"]=>
             int(3)
           }
           ["metadata"]=>
           array(1) {
             [0]=>
             array(8) {
               ["name"]=>
               string(2) "id"
               ["orig_name"]=>
               string(2) "id"
               ["table"]=>
               string(4) "test"
               ["orig_table"]=>
               string(4) "test"
               ["db"]=>
               string(4) "test"
               ["max_length"]=>
               int(0)
               ["length"]=>
               int(11)
               ["type"]=>
               int(3)
             }
           }
         }
       }
     }

It is possible to further break down the granularity of statistics to
the level of the normalized statement string. The normalized statement
string is the statements string with all parameters replaced with
question marks. For example, the two statements `SELECT id FROM test
WHERE id = 0' and `SELECT id FROM test WHERE id = 1' are normalized
into `SELECT id FROM test WHERE id = ?'. Their both statistics are
aggregated into one entry for `SELECT id FROM test WHERE id = ?'.


     mysqlnd_qc.enable_qc=1
     mysqlnd_qc.collect_normalized_query_trace=1


     <?php
     /* connect to MySQL */
     $mysqli = new mysqli("host", "user", "password", "schema", "port", "socket");
     $mysqli->query("DROP TABLE IF EXISTS test");
     $mysqli->query("CREATE TABLE test(id INT)");
     $mysqli->query("INSERT INTO test(id) VALUES (1), (2), (3)");

     /* dummy queries to fill the query trace */
     for ($i = 1; $i <= 4; $i++) {
         $query = sprintf("/*%s*/SELECT id FROM test WHERE id = %d", MYSQLND_QC_ENABLE_SWITCH, $i % 2);
         $res   = $mysqli->query($query);

         $res->free();
     }

     var_dump(mysqlnd_qc_get_normalized_query_trace_log());
     ?>

The above examples will output something similar to:


     array(4) {
       [0]=>
       array(9) {
         ["query"]=>
         string(25) "DROP TABLE IF EXISTS test"
         ["occurences"]=>
         int(0)
         ["eligible_for_caching"]=>
         bool(false)
         ["avg_run_time"]=>
         int(0)
         ["min_run_time"]=>
         int(0)
         ["max_run_time"]=>
         int(0)
         ["avg_store_time"]=>
         int(0)
         ["min_store_time"]=>
         int(0)
         ["max_store_time"]=>
         int(0)
       }
       [1]=>
       array(9) {
         ["query"]=>
         string(27) "CREATE TABLE test (id INT )"
         ["occurences"]=>
         int(0)
         ["eligible_for_caching"]=>
         bool(false)
         ["avg_run_time"]=>
         int(0)
         ["min_run_time"]=>
         int(0)
         ["max_run_time"]=>
         int(0)
         ["avg_store_time"]=>
         int(0)
         ["min_store_time"]=>
         int(0)
         ["max_store_time"]=>
         int(0)
       }
       [2]=>
       array(9) {
         ["query"]=>
         string(46) "INSERT INTO test (id ) VALUES (? ), (? ), (? )"
         ["occurences"]=>
         int(0)
         ["eligible_for_caching"]=>
         bool(false)
         ["avg_run_time"]=>
         int(0)
         ["min_run_time"]=>
         int(0)
         ["max_run_time"]=>
         int(0)
         ["avg_store_time"]=>
         int(0)
         ["min_store_time"]=>
         int(0)
         ["max_store_time"]=>
         int(0)
       }
       [3]=>
       array(9) {
         ["query"]=>
         string(31) "SELECT id FROM test WHERE id =?"
         ["occurences"]=>
         int(4)
         ["eligible_for_caching"]=>
         bool(true)
         ["avg_run_time"]=>
         int(179)
         ["min_run_time"]=>
         int(11)
         ["max_run_time"]=>
         int(393)
         ["avg_store_time"]=>
         int(12)
         ["min_store_time"]=>
         int(7)
         ["max_store_time"]=>
         int(25)
       }
     }

The source distribution of PECL/mysqlnd_qc contains a directory `web/'
in which web based monitoring scripts can be found which give an
example how to write a cache monitor.  Please, follow the instructions
given in the source.

Since PECL/mysqlnd_qc 1.1.0 it is possible to write statistics into a
log file. Please, see ` mysqlnd_qc.collect_statistics_log_file'.


File: manual.info,  Node: apis-php-mysqlnd-qc.set-user-handlers,  Prev: apis-php-mysqlnd-qc.cache-efficiency,  Up: apis-php-mysqlnd-qc.quickstart

22.9.3.13 Beyond TTL: user-defined storage
..........................................

Copyright 1997-2012 the PHP Documentation Group.

The query cache plugin supports the use of user-defined storage
handler. User-defined storage handler can use arbitrarily complex
invalidation algorithms and support arbitrary storage media.

All user-defined storage handlers have to provide a certain interface.
The functions of the user-defined storage handler will be called by the
core of the cache plugin. The necessary interface consists of seven
public functions. Both procedural and object oriented user-defined
storage handler must implement the same set of functions.


     <?php
     /* Enable default caching of all statements */
     ini_set("mysqlnd_qc.cache_by_default", 1);

     /* Procedural user defined storage handler functions */

     $__cache = array();

     function get_hash($host_info, $port, $user, $db, $query) {
         global $__cache;
         printf("\t%s(%d)\n", __FUNCTION__, func_num_args());

         return md5(sprintf("%s%s%s%s%s", $host_info, $port, $user, $db, $query));
     }

     function find_query_in_cache($key) {
         global $__cache;
         printf("\t%s(%d)\n", __FUNCTION__, func_num_args());

         if (isset($__cache[$key])) {
             $tmp = $__cache[$key];
             if ($tmp["valid_until"] < time()) {
                 unset($__cache[$key]);
                 $ret = NULL;
             } else {
                 $ret = $__cache[$key]["data"];
             }
         } else {
             $ret = NULL;
         }

         return $ret;
     }

     function return_to_cache($key) {
         /*
          Called on cache hit after cached data has been processed,
          may be used for reference counting
         */
         printf("\t%s(%d)\n", __FUNCTION__, func_num_args());
     }

     function add_query_to_cache_if_not_exists($key, $data, $ttl, $run_time, $store_time, $row_count) {
         global $__cache;
         printf("\t%s(%d)\n", __FUNCTION__, func_num_args());

         $__cache[$key] = array(
             "data"               => $data,
             "row_count"          => $row_count,
             "valid_until"        => time() + $ttl,
             "hits"               => 0,
             "run_time"           => $run_time,
             "store_time"         => $store_time,
             "cached_run_times"   => array(),
             "cached_store_times" => array(),
         );

         return TRUE;
     }

     function query_is_select($query) {
         printf("\t%s('%s'): ", __FUNCTION__, $query);

         $ret = FALSE;
         if (stristr($query, "SELECT") !== FALSE) {
             /* cache for 5 seconds */
             $ret = 5;
         }

         printf("%s\n", (FALSE === $ret) ? "FALSE" : $ret);
         return $ret;
     }

     function update_query_run_time_stats($key, $run_time, $store_time) {
         global $__cache;
         printf("\t%s(%d)\n", __FUNCTION__, func_num_args());

         if (isset($__cache[$key])) {
             $__cache[$key]['hits']++;
             $__cache[$key]["cached_run_times"][] = $run_time;
             $__cache[$key]["cached_store_times"][] = $store_time;
         }
     }

     function get_stats($key = NULL) {
         global $__cache;
         printf("\t%s(%d)\n", __FUNCTION__, func_num_args());

         if ($key && isset($__cache[$key])) {
             $stats = $__cache[$key];
         } else {
             $stats = array();
             foreach ($__cache as $key => $details) {
                 $stats[$key] = array(
                    'hits'              => $details['hits'],
                    'bytes'             => strlen($details['data']),
                    'uncached_run_time' => $details['run_time'],
                    'cached_run_time'   => (count($details['cached_run_times']))
                                           ? array_sum($details['cached_run_times']) / count($details['cached_run_times'])
                                           : 0,
                 );
             }
         }

         return $stats;
     }

     function clear_cache() {
         global $__cache;
         printf("\t%s(%d)\n", __FUNCTION__, func_num_args());

         $__cache = array();
         return TRUE;
     }

     /* Install procedural user-defined storage handler */
     if (!mysqlnd_qc_set_user_handlers("get_hash", "find_query_in_cache",
         "return_to_cache", "add_query_to_cache_if_not_exists",
         "query_is_select", "update_query_run_time_stats", "get_stats", "clear_cache")) {

             printf("Failed to install user-defined storage handler\n");
     }

     /* Connect, create and populate test table */
     $mysqli = new mysqli("host", "user", "password", "schema", "port", "socket");
     $mysqli->query("DROP TABLE IF EXISTS test");
     $mysqli->query("CREATE TABLE test(id INT)");
     $mysqli->query("INSERT INTO test(id) VALUES (1), (2)");

     printf("\nCache put/cache miss\n");

     $res = $mysqli->query("SELECT id FROM test WHERE id = 1");
     var_dump($res->fetch_assoc());
     $res->free();

     /* Delete record to verify we get our data from the cache */
     $mysqli->query("DELETE FROM test WHERE id = 1");

     printf("\nCache hit\n");

     $res = $mysqli->query("SELECT id FROM test WHERE id = 1");
     var_dump($res->fetch_assoc());
     $res->free();

     printf("\nDisplay cache statistics\n");
     var_dump(mysqlnd_qc_get_cache_info());

     printf("\nFlushing cache, cache put/cache miss");
     var_dump(mysqlnd_qc_clear_cache());

     $res = $mysqli->query("SELECT id FROM test WHERE id = 1");
     var_dump($res->fetch_assoc());
     $res->free();
     ?>

The above examples will output something similar to:


             query_is_select('DROP TABLE IF EXISTS test'): FALSE
             query_is_select('CREATE TABLE test(id INT)'): FALSE
             query_is_select('INSERT INTO test(id) VALUES (1), (2)'): FALSE

     Cache put/cache miss
             query_is_select('SELECT id FROM test WHERE id = 1'): 5
             get_hash(5)
             find_query_in_cache(1)
             add_query_to_cache_if_not_exists(6)
     array(1) {
       ["id"]=>
       string(1) "1"
     }
             query_is_select('DELETE FROM test WHERE id = 1'): FALSE

     Cache hit
             query_is_select('SELECT id FROM test WHERE id = 1'): 5
             get_hash(5)
             find_query_in_cache(1)
             return_to_cache(1)
             update_query_run_time_stats(3)
     array(1) {
       ["id"]=>
       string(1) "1"
     }

     Display cache statistics
             get_stats(0)
     array(4) {
       ["num_entries"]=>
       int(1)
       ["handler"]=>
       string(4) "user"
       ["handler_version"]=>
       string(5) "1.0.0"
       ["data"]=>
       array(1) {
         ["18683c177dc89bb352b29965d112fdaa"]=>
         array(4) {
           ["hits"]=>
           int(1)
           ["bytes"]=>
           int(71)
           ["uncached_run_time"]=>
           int(398)
           ["cached_run_time"]=>
           int(4)
         }
       }
     }

     Flushing cache, cache put/cache miss    clear_cache(0)
     bool(true)
             query_is_select('SELECT id FROM test WHERE id = 1'): 5
             get_hash(5)
             find_query_in_cache(1)
             add_query_to_cache_if_not_exists(6)
     NULL


File: manual.info,  Node: apis-php-mysqlnd-qc.setup,  Next: apis-php-mysqlnd-qc.constants,  Prev: apis-php-mysqlnd-qc.quickstart,  Up: apis-php-book.mysqlnd-qc

22.9.3.14 Installing/Configuring
................................

* Menu:

* apis-php-mysqlnd-qc.requirements::  Requirements
* apis-php-mysqlnd-qc.installation::  Installation
* apis-php-mysqlnd-qc.configuration::  Runtime Configuration

Copyright 1997-2012 the PHP Documentation Group.


File: manual.info,  Node: apis-php-mysqlnd-qc.requirements,  Next: apis-php-mysqlnd-qc.installation,  Prev: apis-php-mysqlnd-qc.setup,  Up: apis-php-mysqlnd-qc.setup

22.9.3.15 Requirements
......................

Copyright 1997-2012 the PHP Documentation Group.

`PHP 5.3.3' or a newer version of `PHP'.

PECL/mysqlnd_qc is a mysqlnd plugin. It plugs into the mysqlnd library.
To use you this plugin with a PHP MySQL extension, the extension
(mysqli, mysql, or See section "apis-php-ref.pdo-mysql" in the online
manual) must enable the mysqlnd library.

For using the APC (http://www.php.net/ref.apc) storage handler with
PECL/mysqlnd_qc 1.0 `APC 3.1.3p1-beta' or newer. PECL/mysqlnd_qc 1.2
has been tested with `APC 3.1.13-beta'. The APC storage handler cannot
be used with a shared build. You cannot use the PHP configuration
directive `extension' to load the APC and PECL/mysqlnd_qc extensions if
PECL/mysqlnd_qc will use APC as a storage handler. For using the APC
storage handler, you have to statically compile PHP with APC and
PECL/mysqlnd_qc support into PHP.

For using `MEMCACHE' storage handler: Use `libmemcache 0.38' or newer.
PECL/mysqlnd_qc 1.2 has been tested with `libmemcache 1.4.0'.

For using `sqlite' storage handler: Use the sqlite3
(http://www.php.net/book.sqlite3) extension that bundled with PHP.


File: manual.info,  Node: apis-php-mysqlnd-qc.installation,  Next: apis-php-mysqlnd-qc.configuration,  Prev: apis-php-mysqlnd-qc.requirements,  Up: apis-php-mysqlnd-qc.setup

22.9.3.16 Installation
......................

Copyright 1997-2012 the PHP Documentation Group.

This PECL (http://pecl.php.net/) extension is not bundled with PHP.

Information for installing this PECL extension may be found in the
manual chapter titled Installation of PECL extensions
(http://www.php.net/install.pecl). Additional information such as new
releases, downloads, source files, maintainer information, and a
CHANGELOG, can be located here: http://pecl.php.net/package/mysqlnd_qc
(http://pecl.php.net/package/mysqlnd_qc)

A DLL for this PECL extension is currently unavailable. See also the
building on Windows (http://www.php.net/install.windows.building)
section.


File: manual.info,  Node: apis-php-mysqlnd-qc.configuration,  Prev: apis-php-mysqlnd-qc.installation,  Up: apis-php-mysqlnd-qc.setup

22.9.3.17 Runtime Configuration
...............................

Copyright 1997-2012 the PHP Documentation Group.

The behaviour of these functions is affected by settings in `php.ini'.

*mysqlnd_qc Configure Options*

Name               Default            Changeable         Changelog
mysqlnd_qc.enable_qc1                  PHP_INI_SYSTEM     
mysqlnd_qc.ttl     30                 PHP_INI_ALL        
mysqlnd_qc.cache_by_default0                  PHP_INI_ALL        
mysqlnd_qc.cache_no_table0                  PHP_INI_ALL        
mysqlnd_qc.use_request_time0                  PHP_INI_ALL        
mysqlnd_qc.time_statistics1                  PHP_INI_ALL        
mysqlnd_qc.collect_statistics0                  PHP_INI_ALL        
mysqlnd_qc.collect_statistics_log_file/tmp/mysqlnd_qc.statsPHP_INI_SYSTEM     
mysqlnd_qc.collect_query_trace0                  PHP_INI_SYSTEM     
mysqlnd_qc.query_trace_bt_depth3                  PHP_INI_SYSTEM     
mysqlnd_qc.collect_normalized_query_trace0                  PHP_INI_SYSTEM     
mysqlnd_qc.ignore_sql_comments1                  PHP_INI_ALL        
mysqlnd_qc.slam_defense0                  PHP_INI_SYSTEM     
mysqlnd_qc.slam_defense_ttl30                 PHP_INI_SYSTEM     
mysqlnd_qc.std_data_copy0                  PHP_INI_SYSTEM     
mysqlnd_qc.apc_prefixqc_                PHP_INI_ALL        
mysqlnd_qc.memc_server127.0.0.1          PHP_INI_ALL        
mysqlnd_qc.memc_port11211              PHP_INI_ALL        
mysqlnd_qc.sqlite_data_file:memory:           PHP_INI_ALL        

Here's a short explanation of the configuration directives.

  1. mysqlnd_qc.enable_qc integer

     Enables or disables the plugin. If disabled the extension will not
     plug into See section "apis-php-mysqli" in the online manual to
     proxy internal See section "apis-php-mysqli" in the online manual
     C API calls.

  2. mysqlnd_qc.ttl integer

     Default Time-to-Live (TTL) for cache entries in seconds.

  3. mysqlnd_qc.cache_by_default integer

     Cache all queries regardless if they begin with the SQL hint that
     enables caching of a query or not. Storage handler cannot overrule
     the setting. It is evaluated by the core of the plugin.

  4. mysqlnd_qc.cache_no_table integer

     Whether to cache queries with no table name in any of columns meta
     data of their result set, for example, `SELECT SLEEP(1)', `SELECT
     NOW()', `SELECT SUBSTRING()'.

  5. mysqlnd_qc.use_request_time integer

     Use PHP global request time to avoid `gettimeofday()' system
     calls? If using ` APC (http://www.php.net/ref.apc) ' storage
     handler it should be set to the value of ` apc.use_request_time
     (http://www.php.net/apc.configuration) ', if not warnings will be
     generated.

  6. mysqlnd_qc.time_statistics integer

     Collect run time and store time statistics using `gettimeofday()'
     system call? Data will be collected only if you also set
     `mysqlnd_qc.collect_statistics = 1',

  7. mysqlnd_qc.collect_statistics integer

     Collect statistics for *Note `mysqlnd_qc_get_core_stats':
     apis-php-function.mysqlnd-qc-get-core-stats.?  Does not influence
     storage handler statistics! Handler statistics can be an integral
     part of the handler internal storage format. Therefore, collection
     of some handler statistics cannot be disabled.

  8. mysqlnd_qc.collect_statistics-log-file integer

     If `mysqlnd_qc.collect_statistics' and
     `mysqlnd_qc.collect_statistics_log_file' are set, the plugin will
     dump statistics into the specified log file at every 10th web
     request during PHP request shutdown. The log file needs to be
     writable by the web server user.

     Since 1.1.0.

  9. mysqlnd_qc.collect_query_trace integer

     Collect query back traces?

 10. mysqlnd_qc.query_trace_bt_depth integer

     Maximum depth/level of a query code backtrace.

 11. mysqlnd_qc.ignore_sql_comments integer

     Whether to remove SQL comments from a query string before hashing
     it to generate a cache key. Disable if you do not want two
     statemts such as `SELECT /*my_source_ip=123*/ id FROM test' and
     `SELECT /*my_source_ip=456*/ id FROM test' to refer to the same
     cache entry.

     Since 1.1.0.

 12. mysqlnd_qc.slam_defense integer

     Activates handler based slam defense (cache stampeding protection)
     if available. Supported by `Default' and ` APC
     (http://www.php.net/ref.apc) ' storage handler

 13. mysqlnd_qc.slam_defense_ttl integer

     `TTL' for stale cache entries which are served while another
     client updates the entries.  Supported by ` APC
     (http://www.php.net/ref.apc) ' storage handler.

 14. mysqlnd_qc.collect_normalized_query_trace integer

     Collect aggregated normalized query traces? The setting has no
     effect by default. You compile the extension using the define
     `NORM_QUERY_TRACE_LOG' to make use of the setting.

 15. mysqlnd_qc.std_data_copy integer

     Default storage handler: copy cached wire data?  EXPERIMENTAL -
     use default setting!

 16. mysqlnd_qc.apc_prefix string

     The ` APC (http://www.php.net/ref.apc) ' storage handler stores
     data in the `APC' user cache. The setting sets a prefix to be used
     for cache entries.

 17. mysqlnd_qc.memc_server string

     `MEMCACHE' storage handler: memcache server host.

 18. mysqlnd_qc.memc_port integer

     `MEMCACHE' storage handler: memcached server port.

 19. mysqlnd_qc.sqlite_data_file string

     `sqlite' storage handler: data file.  Any setting but `:memory:'
     may be of little practical value.


File: manual.info,  Node: apis-php-mysqlnd-qc.constants,  Next: apis-php-ref.mysqlnd-qc,  Prev: apis-php-mysqlnd-qc.setup,  Up: apis-php-book.mysqlnd-qc

22.9.3.18 Predefined Constants
..............................

Copyright 1997-2012 the PHP Documentation Group.

The constants below are defined by this extension, and will only be
available when the extension has either been compiled into PHP or
dynamically loaded at runtime.

_SQL hint related_

The query cache is controlled by SQL hints. SQL hints are used to
enable and disable caching. SQL hints can be used to set the `TTL' of a
query.

The SQL hints recognized by the query cache can be manually changed at
compile time. This makes it possible to use `mysqlnd_qc' in
environments in which the default SQL hints are already taken and
interpreted by other systems. Therefore it is recommended to use the
SQL hint string constants instead of manually adding the default SQL
hints to the query string.


     <?php
     /* Use constants for maximum portability */
     $query = "/*" . MYSQLND_QC_ENABLE_SWITCH . "*/SELECT id FROM test";

     /* Valid but less portable: default TTL */
     $query = "/*qc=on*/SELECT id FROM test";

     /* Valid but less portable: per statement TTL */
     $query = "/*qc=on*//*qc_ttl=5*/SELECT id FROM test";

     printf("MYSQLND_QC_ENABLE_SWITCH: %s\n", MYSQLND_QC_ENABLE_SWITCH);
     printf("MYSQLND_QC_DISABLE_SWITCH: %s\n", MYSQLND_QC_DISABLE_SWITCH);
     printf("MYSQLND_QC_TTL_SWITCH: %s\n", MYSQLND_QC_TTL_SWITCH);
     ?>

The above examples will output:


     MYSQLND_QC_ENABLE_SWITCH: qc=on
     MYSQLND_QC_DISABLE_SWITCH: qc=off
     MYSQLND_QC_TTL_SWITCH: qc_ttl=

  1. MYSQLND_QC_ENABLE_SWITCH

     (string)

     SQL hint used to enable caching of a query.

  2. MYSQLND_QC_DISABLE_SWITCH

     (string)

     SQL hint used to disable caching of a query if
     `mysqlnd_qc.cache_by_default = 1'.

  3. MYSQLND_QC_TTL_SWITCH

     (string)

     SQL hint used to set the TTL of a result set.

  4. MYSQLND_QC_SERVER_ID_SWITCH

     (string)

     This SQL hint should not be used in general.

     It is needed by *Note PECL/mysqlnd_ms: apis-php-book.mysqlnd-ms.
     to group cache entries for one statement but originating from
     different physical connections. If the hint is used connection
     settings such as user, hostname and charset are not considered for
     generating a cache key of a query.  Instead the given value and
     the query string are used as input to the hashing function that
     generates the key.

     PECL/mysqlnd_ms may, if instructed, cache results from MySQL
     Replication slaves. Because it can hold many connections to the
     slave the cache key shall not be formed from the user, hostname or
     other settings that may vary for the various slave connections.
     Instead, PECL/mysqlnd_ms provides an identifier which refers to
     the group of slave connections that shall be enabled to share
     cache entries no matter which physical slave connection was to
     generate the cache entry.

     Use of this feature outside of PECL/mysqlnd_ms is not recommended.

_*Note `mysqlnd_qc_set_cache_condition':
apis-php-function.mysqlnd-qc-set-cache-condition.  related_

The function *Note `mysqlnd_qc_set_cache_condition':
apis-php-function.mysqlnd-qc-set-cache-condition.  allows setting
conditions for automatic caching of statements which don't begin with
the SQL hints necessary to manually enable caching.


     <?php
     /* Cache all accesses to tables with the name "new%" in schema/database "db_example" for 1 second */
     if (!mysqlnd_qc_set_cache_condition(MYSQLND_QC_CONDITION_META_SCHEMA_PATTERN, "db_example.new%", 1)) {
       die("Failed to set cache condition!");
     }

     $mysqli = new mysqli("host", "user", "password", "db_example", "port");
     /* cached although no SQL hint given  */
     $mysqli->query("SELECT id, title FROM news");

     $pdo_mysql = new PDO("mysql:host=host;dbname=db_example;port=port", "user", "password");
     /* not cached: no SQL hint, no pattern match */
     $pdo_mysql->query("SELECT id, title FROM latest_news");
     /* cached: TTL 1 second, pattern match */
     $pdo_mysql->query("SELECT id, title FROM news");
     ?>

  1. MYSQLND_QC_CONDITION_META_SCHEMA_PATTERN

     (int)

     Used as a parameter of *Note `mysqlnd_qc_set_cache_condition':
     apis-php-function.mysqlnd-qc-set-cache-condition.  to set
     conditions for schema based automatic caching.

_Other_

The plugin version number can be obtained using either

MYSQLND_QC_VERSION

, which is the string representation of the numerical version number, or

MYSQLND_QC_VERSION_ID

, which is an integer such as 10000. Developers can calculate the
version number as follows.

Unknown PHP API feature.

Version (part)                       Example
Major*10000                          1*10000 = 10000
Minor*100                            0*100 = 0
Patch                                0 = 0
MYSQLND_QC_VERSION_ID                10000

  1. MYSQLND_QC_VERSION

     (string)

     Plugin version string, for example, `1.0.0-prototype'.

  1. MYSQLND_QC_VERSION_ID

     (int)

     Plugin version number, for example, 10000.


File: manual.info,  Node: apis-php-ref.mysqlnd-qc,  Next: apis-php-mysqlnd-qc.changes,  Prev: apis-php-mysqlnd-qc.constants,  Up: apis-php-book.mysqlnd-qc

22.9.3.19 mysqlnd_qc Functions
..............................

* Menu:

* apis-php-function.mysqlnd-qc-clear-cache::  `mysqlnd_qc_clear_cache'
* apis-php-function.mysqlnd-qc-get-available-handlers::  `mysqlnd_qc_get_available_handlers'
* apis-php-function.mysqlnd-qc-get-cache-info::  `mysqlnd_qc_get_cache_info'
* apis-php-function.mysqlnd-qc-get-core-stats::  `mysqlnd_qc_get_core_stats'
* apis-php-function.mysqlnd-qc-get-normalized-query-trace-log::  `mysqlnd_qc_get_normalized_query_trace_log'
* apis-php-function.mysqlnd-qc-get-query-trace-log::  `mysqlnd_qc_get_query_trace_log'
* apis-php-function.mysqlnd-qc-set-cache-condition::  `mysqlnd_qc_set_cache_condition'
* apis-php-function.mysqlnd-qc-set-is-select::  `mysqlnd_qc_set_is_select'
* apis-php-function.mysqlnd-qc-set-storage-handler::  `mysqlnd_qc_set_storage_handler'
* apis-php-function.mysqlnd-qc-set-user-handlers::  `mysqlnd_qc_set_user_handlers'

Copyright 1997-2012 the PHP Documentation Group.


File: manual.info,  Node: apis-php-function.mysqlnd-qc-clear-cache,  Next: apis-php-function.mysqlnd-qc-get-available-handlers,  Prev: apis-php-ref.mysqlnd-qc,  Up: apis-php-ref.mysqlnd-qc

22.9.3.20 `mysqlnd_qc_clear_cache'
..................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_qc_clear_cache'

     Flush all cache contents

*Description*

bool mysqlnd_qc_clear_cache

Flush all cache contents.

Flushing the cache is a storage handler responsibility. All built-in
storage handler but the `memcache' storage handler support flushing the
cache. The `memcache' storage handler cannot flush its cache contents.

User-defined storage handler may or may not support the operation.

*Parameters*

This function has no parameters.

*Return Values*

Returns

TRUE

on success or

FALSE

on failure.

A return value of

FALSE

indicates that flushing all cache contents has failed or the operation
is not supported by the active storage handler.  Applications must not
expect that calling the function will always flush the cache.


File: manual.info,  Node: apis-php-function.mysqlnd-qc-get-available-handlers,  Next: apis-php-function.mysqlnd-qc-get-cache-info,  Prev: apis-php-function.mysqlnd-qc-clear-cache,  Up: apis-php-ref.mysqlnd-qc

22.9.3.21 `mysqlnd_qc_get_available_handlers'
.............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_qc_get_available_handlers'

     Returns a list of available storage handler

*Description*

array mysqlnd_qc_get_available_handlers

Which storage are available depends on the compile time configuration
of the query cache plugin. The `default' storage handler is always
available.  All other storage handler must be enabled explicitly when
building the extension.

*Parameters*

This function has no parameters.

*Return Values*

Returns an array of available built-in storage handler. For each
storage handler the version number and version string is given.

*Examples*


     <?php
     var_dump(mysqlnd_qc_get_available_handlers());
     ?>

The above examples will output:


     array(5) {
       ["default"]=>
       array(2) {
         ["version"]=>
         string(5) "1.0.0"
         ["version_number"]=>
         int(100000)
       }
       ["user"]=>
       array(2) {
         ["version"]=>
         string(5) "1.0.0"
         ["version_number"]=>
         int(100000)
       }
       ["APC"]=>
       array(2) {
         ["version"]=>
         string(5) "1.0.0"
         ["version_number"]=>
         int(100000)
       }
       ["MEMCACHE"]=>
       array(2) {
         ["version"]=>
         string(5) "1.0.0"
         ["version_number"]=>
         int(100000)
       }
       ["sqlite"]=>
       array(2) {
         ["version"]=>
         string(5) "1.0.0"
         ["version_number"]=>
         int(100000)
       }
     }

*See Also*

*Note Installation: apis-php-mysqlnd-qc.installation.

*Note `mysqlnd_qc_set_storage_handler':
apis-php-function.mysqlnd-qc-set-storage-handler.


File: manual.info,  Node: apis-php-function.mysqlnd-qc-get-cache-info,  Next: apis-php-function.mysqlnd-qc-get-core-stats,  Prev: apis-php-function.mysqlnd-qc-get-available-handlers,  Up: apis-php-ref.mysqlnd-qc

22.9.3.22 `mysqlnd_qc_get_cache_info'
.....................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_qc_get_cache_info'

     Returns information on the current handler, the number of cache
     entries and cache entries, if available

*Description*

array mysqlnd_qc_get_cache_info

*Parameters*

This function has no parameters.

*Return Values*

Returns information on the current handler, the number of cache entries
and cache entries, if available. If and what data will be returned for
the cache entries is subject to the active storage handler. Storage
handler are free to return any data.  Storage handler are recommended
to return at least the data provided by the default handler, if
technically possible.

The scope of the information is the PHP process. Depending on the PHP
deployment model a process may serve one or more web requests.

Values are aggregated for all cache activities on a per storage handler
basis. It is not possible to tell how much queries originating from
`mysqli', `PDO_MySQL' or `mysql'.API calls have contributed to the
aggregated data values. Use *Note `mysqlnd_qc_get_core_stats':
apis-php-function.mysqlnd-qc-get-core-stats.  to get timing data
aggregated for all storage handlers.

Array of cache information

  1. handler string

     The active storage handler.

     All storage handler. Since 1.0.0.

  2. handler_version string

     The version of the active storage handler.

     All storage handler. Since 1.0.0.

  3. num_entries int

     The number of cache entries. The value depends on the storage
     handler in use.

     The default, APC and SQLite storage handler provide the actual
     number of cache entries.

     The MEMCACHE storage handler always returns `0'. MEMCACHE does not
     support counting the number of cache entries.

     If a user defined handler is used, the number of entries of the
     `data' property is reported.

     Since 1.0.0.

  4. data array

     The version of the active storage handler.

     Additional storage handler dependent data on the cache entries.
     Storage handler are requested to provide similar and comparable
     information. A user defined storage handler is free to return any
     data.

     Since 1.0.0.

     The following information is provided by the default storage
     handler for the `data' property.

     The `data' property holds a hash. The hash is indexed by the
     internal cache entry identifier of the storage handler. The cache
     entry identifier is human-readable and contains the query string
     leading to the cache entry. Please, see also the example below. The
     following data is given for every cache entry.

       1. statistics array

          Statistics of the cache entry.

          Since 1.0.0.

          Unknown PHP API feature.

          PropertyDescription                                 Version
          `rows' Number of rows of the cached result set.    Since 1.0.0.
          `stored_size'The size of the cached result set in        Since 1.0.0.
                 bytes. This is the size of the payload.     
                 The value is not suited for calculating     
                 the total memory consumption of all cache   
                 entries including the administrative        
                 overhead of the cache entries.              
          `cache_hits'How often the cached entry has been         Since 1.0.0.
                 returned.                                   
          `run_time'Run time of the statement to which the      Since 1.0.0.
                 cache entry belongs. This is the run time   
                 of the uncached statement. It is the time   
                 between sending the statement to MySQL      
                 receiving a reply from MySQL. Run time      
                 saved by using the query cache plugin can   
                 be calculated like this: `cache_hits *      
                 ((run_time - avg_run_time) + (store_time -  
                 avg_store_time))'.                          
          `store_time'Store time of the statements result set to  Since 1.0.0.
                 which the cache entry belongs. This is the  
                 time it took to fetch and store the         
                 results of the uncached statement.          
          `min_run_time'Minimum run time of the cached statement.   Since 1.0.0.
                 How long it took to find the statement in   
                 the cache.                                  
          `min_store_time'Minimum store time of the cached            Since 1.0.0.
                 statement. The time taken for fetching the  
                 cached result set from the storage medium   
                 and decoding                                
          `avg_run_time'Average run time of the cached statement.   Since 1.0.0.
          `avg_store_time'Average store time of the cached statement. Since 1.0.0.
          `max_run_time'Average run time of the cached statement.   Since 1.0.0.
          `max_store_time'Average store time of the cached statement. Since 1.0.0.
          `valid_until'Timestamp when the cache entry expires.     Since 1.1.0.

       2. metadata array

          Metadata of the cache entry. This is the metadata provided by
          MySQL together with the result set of the statement in
          question.  Different versions of the MySQL server may return
          different metadata. Unlike with some of the PHP MySQL
          extensions no attempt is made to hide MySQL server version
          dependencies and version details from the caller. Please,
          refer to the MySQL C API documentation that belongs to the
          MySQL server in use for further details.

          The metadata list contains one entry for every column.

          Since 1.0.0.

          Unknown PHP API feature.

          PropertyDescription                                 Version
          `name' The field name. Depending on the MySQL      Since 1.0.0.
                 version this may be the fields alias name.  
          `org_name'The field name.                             Since 1.0.0.
          `table'The table name. If an alias name was used   Since 1.0.0.
                 for the table, this usually holds the       
                 alias name.                                 
          `org_table'The table name.                             Since 1.0.0.
          `db'   The database/schema name.                   Since 1.0.0.
          `max_length'The maximum width of the field. Details     Since 1.0.0.
                 may vary by MySQL server version.           
          `length'The width of the field. Details may vary    Since 1.0.0.
                 by MySQL server version.                    
          `type' The data type of the field. Details may     Since 1.0.0.
                 vary by the MySQL server in use.  This is   
                 the MySQL C API type constants value. It    
                 is recommended to use type constants        
                 provided by the `mysqli' extension to test  
                 for its meaning. You should not test for    
                 certain type values by comparing with       
                 certain numbers.                            

     The APC storage handler returns the same information for the
     `data' property but no `metadata'. The `metadata' of a cache entry
     is set to `NULL'.

     The MEMCACHE storage handler does not fill the `data' property.
     Statistics are not available on a per cache entry basis with the
     MEMCACHE storage handler.

     A user defined storage handler is free to provide any data.

*Examples*

The example shows the output from the built-in default storage handler.
Other storage handler may report different data.


     <?php
     /* Populate the cache, e.g. using mysqli */
     $mysqli = new mysqli("host", "user", "password", "schema");
     $mysqli->query("/*" . MYSQLND_QC_ENABLE_SWITCH . "*/SELECT id FROM test");

     /* Display cache information */
     var_dump(mysqlnd_qc_get_cache_info());
     ?>

The above examples will output:


     array(4) {
      ["num_entries"]=>
      int(1)
      ["handler"]=>
      string(7) "default"
      ["handler_version"]=>
      string(5) "1.0.0"
      ["data"]=>
      array(1) {
        ["Localhost via UNIX socket 3306 user schema|/*qc=on*/SELECT id FROM test"]=>
        array(2) {
          ["statistics"]=>
          array(11) {
            ["rows"]=>
            int(6)
            ["stored_size"]=>
            int(101)
            ["cache_hits"]=>
            int(0)
            ["run_time"]=>
            int(471)
            ["store_time"]=>
            int(27)
            ["min_run_time"]=>
            int(0)
            ["max_run_time"]=>
            int(0)
            ["min_store_time"]=>
            int(0)
            ["max_store_time"]=>
            int(0)
            ["avg_run_time"]=>
            int(0)
            ["avg_store_time"]=>
            int(0)
          }
          ["metadata"]=>
          array(1) {
            [0]=>
            array(8) {
              ["name"]=>
              string(2) "id"
              ["orig_name"]=>
              string(2) "id"
              ["table"]=>
              string(4) "test"
              ["orig_table"]=>
              string(4) "test"
              ["db"]=>
              string(4) "schema"
              ["max_length"]=>
              int(1)
              ["length"]=>
              int(11)
              ["type"]=>
              int(3)
            }
          }
        }
      }
     }

*See Also*

*Note `mysqlnd_qc_get_core_stats':
apis-php-function.mysqlnd-qc-get-core-stats.


File: manual.info,  Node: apis-php-function.mysqlnd-qc-get-core-stats,  Next: apis-php-function.mysqlnd-qc-get-normalized-query-trace-log,  Prev: apis-php-function.mysqlnd-qc-get-cache-info,  Up: apis-php-ref.mysqlnd-qc

22.9.3.23 `mysqlnd_qc_get_core_stats'
.....................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_qc_get_core_stats'

     Statistics collected by the core of the query cache

*Description*

array mysqlnd_qc_get_core_stats

Returns an array of statistics collected by the core of the cache
plugin. The same data fields will be reported for any storage handler
because the data is collected by the core.

The `PHP' configuration setting `mysqlnd_qc.collect_statistics'
controls the collection of statistics. The collection of statistics is
disabled by default for performance reasons. Disabling the collection
of statistics will also disable the collection of time related
statistics.

The `PHP' configuration setting `mysqlnd_qc.collect_time_statistics'
controls the collection of time related statistics.

The scope of the core statistics is the `PHP' process. Depending on
your deployment model a `PHP' process may handle one or multiple
requests.

Statistics are aggregated for all cache entries and all storage
handler. It is not possible to tell how much queries originating from
`mysqli', `PDO_MySQL' or `mysql' API calls have contributed to the
aggregated data values.

*Parameters*

This function has no parameters.

*Return Values*

Array of core statistics

Unknown PHP API feature.

StatisticDescription                                        Version
`cache_hit'Statement is considered cacheable and cached data  Since 1.0.0.
        has been reused.  Statement is considered          
        cacheable and a cache miss happened but the        
        statement got cached by someone else while we      
        process it and thus we can fetch the result from   
        the refreshed cache.                               
`cache_miss'Statement is considered cacheable...               Since 1.0.0.
                                                           
           * ... and has been added to the cache           
                                                           
           * ... but the `PHP' configuration directive     
             setting of `mysqlnd_qc.cache_no_table = 1'    
             has prevented caching.                        
                                                           
           * ... but an unbuffered result set is           
             requested.                                    
                                                           
           * ... but a buffered result set was empty.      
`cache_put'Statement is considered cacheable and has been     Since 1.0.0.
        added to the cache. Take care when calculating     
        derived statistics. Storage handler with a         
        storage life time beyond process scope may report  
        `cache_put = 0' together with `cache_hit > 0', if  
        another process has filled the cache. You may      
        want to use `num_entries' from *Note               
        `mysqlnd_qc_get_cache_info':                       
        apis-php-function.mysqlnd-qc-get-cache-info.  if   
        the handler supports it ( `default', `APC').       
`query_should_cache'Statement is considered cacheable based on query   Since 1.0.0.
        string analysis. The statement may or may not be   
        added to the cache. See also `cache_put'.          
`query_should_not_cache'Statement is considered not cacheable based on     Since 1.0.0.
        query string analysis.                             
`query_not_cached'Statement is considered not cacheable or it is     Since 1.0.0.
        considered cachable but the storage handler has    
        not returned a hash key for it.                    
`query_could_cache'Statement is considered cacheable...               Since 1.0.0.
                                                           
           * ... and statement has been run without errors 
                                                           
           * ... and meta data shows at least one column   
             in the result set                             
        The statement may or may not be in the cache       
        already. It may or may not be added to the cache   
        later on.                                          
`query_found_in_cache'Statement is considered cacheable and we have      Since 1.0.0.
        found it in the cache but we have not replayed     
        the cached data yet and we have not send the       
        result set to the client yet. This is not          
        considered a cache hit because the client might    
        not fetch the result or the cached data may be     
        faulty.                                            
`query_uncached_other'Statement is considered cacheable and it may or    
        may not be in the cache already but either         
        replaying cached data has failed, no result set    
        is available or some other error has happened.     
`query_uncached_no_table'Statement has not been cached because the result   Since 1.0.0.
        set has at least one column which has no table     
        name in its meta data. An example of such a query  
        is `SELECT SLEEP(1)'. To cache those statements    
        you have to change default value of the PHP        
        configuration directive                            
        `mysqlnd_qc.cache_no_table' and set                
        `mysqlnd_qc.cache_no_table = 1'. Often, it is not  
        desired to cache such statements.                  
`query_uncached_use_result'Statement would have been cached if a buffered     Since 1.0.0.
        result set had been used.  The situation is also   
        considered as a cache miss and `cache_miss' will   
        be incremented as well.                            
`query_aggr_run_time_cache_hit'Aggregated run time (ms) of all cached queries.    Since 1.0.0.
        Cached queries are those which have incremented    
        `cache_hit'.                                       
`query_aggr_run_time_cache_put'Aggregated run time (ms) of all uncached queries   Since 1.0.0.
        that have been put into the cache. See also        
        `cache_put'.                                       
`query_aggr_run_time_total'Aggregated run time (ms) of all uncached and       Since 1.0.0.
        cached queries that have been inspected and        
        executed by the query cache.                       
`query_aggr_store_time_cache_hit'Aggregated store time (ms) of all cached queries.  Since 1.0.0.
        Cached queries are those which have incremented    
        `cache_hit'.                                       
`query_aggr_store_time_cache_put'Aggregated store time ( `ms') of all uncached      Since 1.0.0.
        queries that have been put into the cache. See     
        also `cache_put'.                                  
`query_aggr_store_time_total'Aggregated store time (ms) of all uncached and     Since 1.0.0.
        cached queries that have been inspected and        
        executed by the query cache.                       
`receive_bytes_recorded'Recorded incoming network traffic ( `bytes') send  Since 1.0.0.
        from MySQL to PHP. The traffic may or may not      
        have been added to the cache. The traffic is the   
        total for all queries regardless if cached or not. 
`receive_bytes_replayed'Network traffic replayed during cache. This is     Since 1.0.0.
        the total amount of incoming traffic saved         
        because of the usage of the query cache plugin.    
`send_bytes_recorded'Recorded outgoing network traffic ( `bytes') send  Since 1.0.0.
        from MySQL to PHP. The traffic may or may not      
        have been added to the cache. The traffic is the   
        total for all queries regardless if cached or not. 
`send_bytes_replayed'Network traffic replayed during cache. This is     Since 1.0.0.
        the total amount of outgoing traffic saved         
        because of the usage of the query cache plugin.    
`slam_stale_refresh'Number of cache misses which triggered serving     Since 1.0.0.
        stale data until the client causing the cache      
        miss has refreshed the cache entry.                
`slam_stale_hit'Number of cache hits while a stale cache entry     Since 1.0.0.
        gets refreshed.                                    

*Examples*


     <?php
     /* Enable collection of statistics - default: disabled */
     ini_set("mysqlnd_qc.collect_statistics", 1);

     /* Enable collection of all timing related statistics -
     default: enabled but overruled by mysqlnd_qc.collect_statistics = 0 */
     ini_set("mysqlnd_qc.collect_time_statistics", 1);

     /* Populate the cache, e.g. using mysqli */
     $mysqli = new mysqli('host', 'user', 'password', 'schema');

     /* Cache miss and cache put */
     $mysqli->query("/*qc=on*/SELECT id FROM test");
     /* Cache hit */
     $mysqli->query("/*qc=on*/SELECT id FROM test");

     /* Display core statistics */
     var_dump(mysqlnd_qc_get_core_stats());
     ?>

The above examples will output:


     array(26) {
       ["cache_hit"]=>
       string(1) "1"
       ["cache_miss"]=>
       string(1) "1"
       ["cache_put"]=>
       string(1) "1"
       ["query_should_cache"]=>
       string(1) "2"
       ["query_should_not_cache"]=>
       string(1) "0"
       ["query_not_cached"]=>
       string(1) "0"
       ["query_could_cache"]=>
       string(1) "2"
       ["query_found_in_cache"]=>
       string(1) "1"
       ["query_uncached_other"]=>
       string(1) "0"
       ["query_uncached_no_table"]=>
       string(1) "0"
       ["query_uncached_no_result"]=>
       string(1) "0"
       ["query_uncached_use_result"]=>
       string(1) "0"
       ["query_aggr_run_time_cache_hit"]=>
       string(1) "4"
       ["query_aggr_run_time_cache_put"]=>
       string(3) "395"
       ["query_aggr_run_time_total"]=>
       string(3) "399"
       ["query_aggr_store_time_cache_hit"]=>
       string(1) "2"
       ["query_aggr_store_time_cache_put"]=>
       string(1) "8"
       ["query_aggr_store_time_total"]=>
       string(2) "10"
       ["receive_bytes_recorded"]=>
       string(2) "65"
       ["receive_bytes_replayed"]=>
       string(2) "65"
       ["send_bytes_recorded"]=>
       string(2) "29"
       ["send_bytes_replayed"]=>
       string(2) "29"
       ["slam_stale_refresh"]=>
       string(1) "0"
       ["slam_stale_hit"]=>
       string(1) "0"
       ["request_counter"]=>
       int(1)
       ["process_hash"]=>
       int(3547549858)
     }

*See Also*

*Note Runtime configuration: apis-php-mysqlnd-qc.configuration.

mysqlnd_qc.collect_statistics

mysqlnd_qc.time_statistics

*Note `mysqlnd_qc_get_cache_info':
apis-php-function.mysqlnd-qc-get-cache-info.


File: manual.info,  Node: apis-php-function.mysqlnd-qc-get-normalized-query-trace-log,  Next: apis-php-function.mysqlnd-qc-get-query-trace-log,  Prev: apis-php-function.mysqlnd-qc-get-core-stats,  Up: apis-php-ref.mysqlnd-qc

22.9.3.24 `mysqlnd_qc_get_normalized_query_trace_log'
.....................................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_qc_get_normalized_query_trace_log'

     Returns a normalized query trace log for each query inspected by
     the query cache

*Description*

array mysqlnd_qc_get_normalized_query_trace_log

Returns a normalized query trace log for each query inspected by the
query cache. The collection of the trace log is disabled by default. To
collect the trace log you have to set the PHP configuration directive
`mysqlnd_qc.collect_normalized_query_trace' to `1'

Entries in the trace log are grouped by the normalized query statement.
The normalized query statement is the query statement with all
statement parameter values being replaced with a question mark. For
example, the two statements `SELECT id FROM test WHERE id = 1' and
`SELECT id FROM test WHERE id = 2' are normalized as `SELECT id FROM
test WHERE id = ?'. Whenever a statement is inspected by the query
cache which matches the normalized statement pattern, its statistics
are grouped by the normalized statement string.

*Parameters*

This function has no parameters.

*Return Values*

An array of query log. Every list entry contains the normalized query
stringand further detail information.

Unknown PHP API feature.

Key     Description
`query' Normalized statement string.
`occurences'How many statements have matched the normalized statement string
        in addition to the one which has created the log entry. The
        value is zero if a statement has been normalized, its normalized
        representation has been added to the log but no further queries
        inspected by PECL/mysqlnd_qc have the same normalized statement
        string.
`eligible_for_caching'Whether the statement could be cached. An statement eligible for
        caching has not necessarily been cached. It not possible to tell
        for sure if or how many cached statement have contributed to the
        aggregated normalized statement log entry. However, comparing
        the minimum and average run time one can make an educated guess.
`avg_run_time'The average run time of all queries contributing to the query
        log entry.  The run time is the time between sending the query
        statement to MySQL and receiving an answer from MySQL.
`avg_store_time'The average store time of all queries contributing to the query
        log entry. The store time is the time needed to fetch a
        statements result set from the server to the client and, storing
        it on the client.
`min_run_time'The minimum run time of all queries contributing to the query
        log entry.
`min_store_time'The minimum store time of all queries contributing to the query
        log entry.
`max_run_time'The maximum run time of all queries contributing to the query
        log entry.
`max_store_time'The maximum store time of all queries contributing to the query
        log entry.

*Examples*


     mysqlnd_qc.collect_normalized_query_trace=1


     <?php
     /* Connect, create and populate test table */
     $mysqli = new mysqli("host", "user", "password", "schema", "port", "socket");
     $mysqli->query("DROP TABLE IF EXISTS test");
     $mysqli->query("CREATE TABLE test(id INT)");
     $mysqli->query("INSERT INTO test(id) VALUES (1), (2)");

     /* not cached */
     $res = $mysqli->query("SELECT id FROM test WHERE id = 1");
     var_dump($res->fetch_assoc());
     $res->free();

     /* cache put */
     $res = $mysqli->query("/*" . MYSQLND_QC_ENABLE_SWITCH . "*/" . "SELECT id FROM test WHERE id = 2");
     var_dump($res->fetch_assoc());
     $res->free();

     /* cache hit */
     $res = $mysqli->query("/*" . MYSQLND_QC_ENABLE_SWITCH . "*/" . "SELECT id FROM test WHERE id = 2");
     var_dump($res->fetch_assoc());
     $res->free();

     var_dump(mysqlnd_qc_get_normalized_query_trace_log());
     ?>

The above examples will output:


     array(1) {
       ["id"]=>
       string(1) "1"
     }
     array(1) {
       ["id"]=>
       string(1) "2"
     }
     array(1) {
       ["id"]=>
       string(1) "2"
     }
     array(4) {
       [0]=>
       array(9) {
         ["query"]=>
         string(25) "DROP TABLE IF EXISTS test"
         ["occurences"]=>
         int(0)
         ["eligible_for_caching"]=>
         bool(false)
         ["avg_run_time"]=>
         int(0)
         ["min_run_time"]=>
         int(0)
         ["max_run_time"]=>
         int(0)
         ["avg_store_time"]=>
         int(0)
         ["min_store_time"]=>
         int(0)
         ["max_store_time"]=>
         int(0)
       }
       [1]=>
       array(9) {
         ["query"]=>
         string(27) "CREATE TABLE test (id INT )"
         ["occurences"]=>
         int(0)
         ["eligible_for_caching"]=>
         bool(false)
         ["avg_run_time"]=>
         int(0)
         ["min_run_time"]=>
         int(0)
         ["max_run_time"]=>
         int(0)
         ["avg_store_time"]=>
         int(0)
         ["min_store_time"]=>
         int(0)
         ["max_store_time"]=>
         int(0)
       }
       [2]=>
       array(9) {
         ["query"]=>
         string(40) "INSERT INTO test (id ) VALUES (? ), (? )"
         ["occurences"]=>
         int(0)
         ["eligible_for_caching"]=>
         bool(false)
         ["avg_run_time"]=>
         int(0)
         ["min_run_time"]=>
         int(0)
         ["max_run_time"]=>
         int(0)
         ["avg_store_time"]=>
         int(0)
         ["min_store_time"]=>
         int(0)
         ["max_store_time"]=>
         int(0)
       }
       [3]=>
       array(9) {
         ["query"]=>
         string(31) "SELECT id FROM test WHERE id =?"
         ["occurences"]=>
         int(2)
         ["eligible_for_caching"]=>
         bool(true)
         ["avg_run_time"]=>
         int(159)
         ["min_run_time"]=>
         int(12)
         ["max_run_time"]=>
         int(307)
         ["avg_store_time"]=>
         int(10)
         ["min_store_time"]=>
         int(8)
         ["max_store_time"]=>
         int(13)
       }
     }

*See Also*

*Note Runtime configuration: apis-php-mysqlnd-qc.configuration.

mysqlnd_qc.collect_normalized_query_trace

mysqlnd_qc.time_statistics

*Note `mysqlnd_qc_get_query_trace_log':
apis-php-function.mysqlnd-qc-get-query-trace-log.


File: manual.info,  Node: apis-php-function.mysqlnd-qc-get-query-trace-log,  Next: apis-php-function.mysqlnd-qc-set-cache-condition,  Prev: apis-php-function.mysqlnd-qc-get-normalized-query-trace-log,  Up: apis-php-ref.mysqlnd-qc

22.9.3.25 `mysqlnd_qc_get_query_trace_log'
..........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_qc_get_query_trace_log'

     Returns a backtrace for each query inspected by the query cache

*Description*

array mysqlnd_qc_get_query_trace_log

Returns a backtrace for each query inspected by the query cache.  The
collection of the backtrace is disabled by default. To collect the
backtrace you have to set the PHP configuration directive
`mysqlnd_qc.collect_query_trace' to `1'

The maximum depth of the backtrace is limited to the depth set with the
PHP configuration directive `mysqlnd_qc.query_trace_bt_depth'.

*Parameters*

This function has no parameters.

*Return Values*

An array of query backtrace. Every list entry contains the query
string, a backtrace and further detail information.

Unknown PHP API feature.

Key     Description
`query' Query string.
`origin'Code backtrace.
`run_time'Query run time in milliseconds. The collection of all times and
        the necessary `gettimeofday' system calls can be disabled by
        setting the PHP configuration directive
        `mysqlnd_qc.time_statistics' to `0'
`store_time'Query result set store time in milliseconds. The collection of
        all times and the necessary `gettimeofday' system calls can be
        disabled by setting the PHP configuration directive
        `mysqlnd_qc.time_statistics' to `0'
`eligible_for_caching'TRUE
        
        if query is cacheable otherwise
        
        FALSE
        
        .
`no_table'TRUE
        
        if the query has generated a result set and at least one column
        from the result set has no table name set in its metadata. This
        is usually the case with queries which one probably do not want
        to cache such as `SELECT SLEEP(1)'. By default any such query
        will not be added to the cache. See also PHP configuration
        directive `mysqlnd_qc.cache_no_table'.
`was_added'TRUE
        
        if the query result has been put into the cache, otherwise
        
        FALSE
        
        .
`was_already_in_cache'TRUE
        
        if the query result would have been added to the cache if it was
        not already in the cache (cache hit).  Otherwise
        
        FALSE
        
        .

*Examples*


     mysqlnd_qc.collect_query_trace=1


     <?php
     /* Connect, create and populate test table */
     $mysqli = new mysqli("host", "user", "password", "schema", "port", "socket");
     $mysqli->query("DROP TABLE IF EXISTS test");
     $mysqli->query("CREATE TABLE test(id INT)");
     $mysqli->query("INSERT INTO test(id) VALUES (1), (2)");

     /* not cached */
     $res = $mysqli->query("SELECT id FROM test WHERE id = 1");
     var_dump($res->fetch_assoc());
     $res->free();

     /* cache put */
     $res = $mysqli->query("/*" . MYSQLND_QC_ENABLE_SWITCH . "*/" . "SELECT id FROM test WHERE id = 2");
     var_dump($res->fetch_assoc());
     $res->free();

     /* cache hit */
     $res = $mysqli->query("/*" . MYSQLND_QC_ENABLE_SWITCH . "*/" . "SELECT id FROM test WHERE id = 2");
     var_dump($res->fetch_assoc());
     $res->free();

     var_dump(mysqlnd_qc_get_query_trace_log());
     ?>

The above examples will output:


     array(1) {
       ["id"]=>
       string(1) "1"
     }
     array(1) {
       ["id"]=>
       string(1) "2"
     }
     array(1) {
       ["id"]=>
       string(1) "2"
     }
     array(6) {
       [0]=>
       array(8) {
         ["query"]=>
         string(25) "DROP TABLE IF EXISTS test"
         ["origin"]=>
         string(102) "#0 qc.php(4): mysqli->query('DROP TABLE IF E...')
     #1 {main}"
         ["run_time"]=>
         int(0)
         ["store_time"]=>
         int(0)
         ["eligible_for_caching"]=>
         bool(false)
         ["no_table"]=>
         bool(false)
         ["was_added"]=>
         bool(false)
         ["was_already_in_cache"]=>
         bool(false)
       }
       [1]=>
       array(8) {
         ["query"]=>
         string(25) "CREATE TABLE test(id INT)"
         ["origin"]=>
         string(102) "#0 qc.php(5): mysqli->query('CREATE TABLE te...')
     #1 {main}"
         ["run_time"]=>
         int(0)
         ["store_time"]=>
         int(0)
         ["eligible_for_caching"]=>
         bool(false)
         ["no_table"]=>
         bool(false)
         ["was_added"]=>
         bool(false)
         ["was_already_in_cache"]=>
         bool(false)
       }
       [2]=>
       array(8) {
         ["query"]=>
         string(36) "INSERT INTO test(id) VALUES (1), (2)"
         ["origin"]=>
         string(102) "#0 qc.php(6): mysqli->query('INSERT INTO tes...')
     #1 {main}"
         ["run_time"]=>
         int(0)
         ["store_time"]=>
         int(0)
         ["eligible_for_caching"]=>
         bool(false)
         ["no_table"]=>
         bool(false)
         ["was_added"]=>
         bool(false)
         ["was_already_in_cache"]=>
         bool(false)
       }
       [3]=>
       array(8) {
         ["query"]=>
         string(32) "SELECT id FROM test WHERE id = 1"
         ["origin"]=>
         string(102) "#0 qc.php(9): mysqli->query('SELECT id FROM ...')
     #1 {main}"
         ["run_time"]=>
         int(0)
         ["store_time"]=>
         int(25)
         ["eligible_for_caching"]=>
         bool(false)
         ["no_table"]=>
         bool(false)
         ["was_added"]=>
         bool(false)
         ["was_already_in_cache"]=>
         bool(false)
       }
       [4]=>
       array(8) {
         ["query"]=>
         string(41) "/*qc=on*/SELECT id FROM test WHERE id = 2"
         ["origin"]=>
         string(103) "#0 qc.php(14): mysqli->query('/*qc=on*/SELECT...')
     #1 {main}"
         ["run_time"]=>
         int(311)
         ["store_time"]=>
         int(13)
         ["eligible_for_caching"]=>
         bool(true)
         ["no_table"]=>
         bool(false)
         ["was_added"]=>
         bool(true)
         ["was_already_in_cache"]=>
         bool(false)
       }
       [5]=>
       array(8) {
         ["query"]=>
         string(41) "/*qc=on*/SELECT id FROM test WHERE id = 2"
         ["origin"]=>
         string(103) "#0 qc.php(19): mysqli->query('/*qc=on*/SELECT...')
     #1 {main}"
         ["run_time"]=>
         int(13)
         ["store_time"]=>
         int(8)
         ["eligible_for_caching"]=>
         bool(true)
         ["no_table"]=>
         bool(false)
         ["was_added"]=>
         bool(false)
         ["was_already_in_cache"]=>
         bool(true)
       }
     }

*See Also*

*Note Runtime configuration: apis-php-mysqlnd-qc.configuration.

mysqlnd_qc.collect_query_trace

mysqlnd_qc.query_trace_bt_depth

mysqlnd_qc.time_statistics

mysqlnd_qc.cache_no_table

*Note `mysqlnd_qc_get_normalized_query_trace_log':
apis-php-function.mysqlnd-qc-get-normalized-query-trace-log.


File: manual.info,  Node: apis-php-function.mysqlnd-qc-set-cache-condition,  Next: apis-php-function.mysqlnd-qc-set-is-select,  Prev: apis-php-function.mysqlnd-qc-get-query-trace-log,  Up: apis-php-ref.mysqlnd-qc

22.9.3.26 `mysqlnd_qc_set_cache_condition'
..........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_qc_set_cache_condition'

     Set conditions for automatic caching

*Description*

bool mysqlnd_qc_set_cache_condition

int condition_type

mixed condition

mixed condition_option

Sets a condition for automatic caching of statements which do not
contain the necessary SQL hints to enable caching of them.

*Parameters*

  1. condition_type

     Type of the condition. The only allowed value is

     MYSQLND_QC_CONDITION_META_SCHEMA_PATTERN

     .

  2. condition

     Parameter for the condition set with `condition_type'. Parameter
     type and structure depend on `condition_type'

     If `condition_type' equals
     `MYSQLND_QC_CONDITION_META_SCHEMA_PATTERN' `condition' must be a
     string. The string sets a pattern. Statements are cached if table
     and database meta data entry of their result sets match the
     pattern. The pattern is checked for a match with the `db' and
     `org_table' meta data entries provided by the underlying MySQL
     client server library. Please, check the MySQL Reference manual
     for details about the two entries. The `db' and `org_table' values
     are concatenated with a dot (`.') before matched against
     `condition'.  Pattern matching supports the wildcards `%' and `_'.
     The wildcard `%' will match one or many arbitrary characters. `_'
     will match one arbitrary character. The escape symbol is backslash.

  3. condition_option

     Option for `condition'. Type and structure depend on
     `condition_type'.

     If `condition_type' equals
     `MYSQLND_QC_CONDITION_META_SCHEMA_PATTERN' `condition_options' is
     the TTL to be used.

*Examples*


     <?php
     /* Cache all accesses to tables with the name "new%" in schema/database "db_example" for 1 second */
     if (!mysqlnd_qc_set_cache_condition(MYSQLND_QC_CONDITION_META_SCHEMA_PATTERN, "db_example.new%", 1)) {
       die("Failed to set cache condition!");
     }

     $mysqli = new mysqli("host", "user", "password", "db_example", "port");
     /* cached although no SQL hint given  */
     $mysqli->query("SELECT id, title FROM news");

     $pdo_mysql = new PDO("mysql:host=host;dbname=db_example;port=port", "user", "password");
     /* not cached: no SQL hint, no pattern match */
     $pdo_mysql->query("SELECT id, title FROM latest_news");
     /* cached: TTL 1 second, pattern match */
     $pdo_mysql->query("SELECT id, title FROM news");
     ?>

*Return Values*

Returns TRUE on success or FALSE on FAILURE.

*See Also*

*Note Quickstart: pattern based caching:
apis-php-mysqlnd-qc.pattern-based-caching.


File: manual.info,  Node: apis-php-function.mysqlnd-qc-set-is-select,  Next: apis-php-function.mysqlnd-qc-set-storage-handler,  Prev: apis-php-function.mysqlnd-qc-set-cache-condition,  Up: apis-php-ref.mysqlnd-qc

22.9.3.27 `mysqlnd_qc_set_is_select'
....................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_qc_set_is_select'

     Installs a callback which decides whether a statement is cached

*Description*

mixed mysqlnd_qc_set_is_select

string callback

Installs a callback which decides whether a statement is cached.

There are several ways of hinting PELC/mysqlnd_qc to cache a query. By
default, PECL/mysqlnd_qc attempts to cache a if caching of all
statements is enabled or the query string begins with a certain SQL
hint. The plugin internally calls a function named `is_select()' to
find out. This internal function can be replaced with a user-defined
callback. Then, the user-defined callback is responsible to decide
whether the plugin attempts to cache a statement. Because the internal
function is replaced with the callback, the callback gains full
control. The callback is free to ignore the configuration setting
`mysqlnd_qc.cache_by_default' and SQL hints.

The callback is invoked for every statement inspected by the plugin. It
is given the statements string as a parameter. The callback returns

FALSE

if the statement shall not be cached. It returns

TRUE

to make the plugin attempt to cache the statements result set, if any.
A so-created cache entry is given the default TTL set with the PHP
configuration directive `mysqlnd_qc.ttl'. If a different TTL shall be
used, the callback returns a numeric value to be used as the TTL.

The internal `is_select' function is part of the internal cache storage
handler interface. Thus, a user-defined storage handler offers the same
capabilities.

*Parameters*

This function has no parameters.

*Return Values*

Returns

TRUE

on success or

FALSE

on failure.

*Examples*


     <?php
     /* callback which decides if query is cached */
     function is_select($query) {
       static $patterns = array(
        /* true - use default from mysqlnd_qc.ttl */
        "@SELECT\s+.*\s+FROM\s+test@ismU" => true,
        /* 3 - use TTL = 3 seconds */
        "@SELECT\s+.*\s+FROM\s+news@ismU" => 3
       );
       /* check if query does match pattern */
       foreach ($patterns as $pattern => $ttl) {
         if (preg_match($pattern, $query)) {
           printf("is_select(%45s): cache\n", $query);
           return $ttl;
         }
       }
       printf("is_select(%45s): do not cache\n", $query);
       return false;
     }
     mysqlnd_qc_set_is_select("is_select");

     /* Connect, create and populate test table */
     $mysqli = new mysqli("host", "user", "password", "schema");
     $mysqli->query("DROP TABLE IF EXISTS test");
     $mysqli->query("CREATE TABLE test(id INT)");
     $mysqli->query("INSERT INTO test(id) VALUES (1), (2), (3)");

     /* cache put */
     $mysqli->query("SELECT id FROM test WHERE id = 1");
     /* cache hit */
     $mysqli->query("SELECT id FROM test WHERE id = 1");
     /* cache put */
     $mysqli->query("SELECT * FROM test");
     ?>

The above examples will output:


     is_select(                    DROP TABLE IF EXISTS test): do not cache
     is_select(                    CREATE TABLE test(id INT)): do not cache
     is_select(    INSERT INTO test(id) VALUES (1), (2), (3)): do not cache
     is_select(             SELECT id FROM test WHERE id = 1): cache
     is_select(             SELECT id FROM test WHERE id = 1): cache
     is_select(                           SELECT * FROM test): cache

*See Also*

*Note Runtime configuration: apis-php-mysqlnd-qc.configuration.

mysqlnd_qc.ttl

mysqlnd_qc.cache_by_default

*Note `mysqlnd_qc_set_user_handlers':
apis-php-function.mysqlnd-qc-set-user-handlers.


File: manual.info,  Node: apis-php-function.mysqlnd-qc-set-storage-handler,  Next: apis-php-function.mysqlnd-qc-set-user-handlers,  Prev: apis-php-function.mysqlnd-qc-set-is-select,  Up: apis-php-ref.mysqlnd-qc

22.9.3.28 `mysqlnd_qc_set_storage_handler'
..........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_qc_set_storage_handler'

     Change current storage handler

*Description*

bool mysqlnd_qc_set_storage_handler

string handler

Sets the storage handler used by the query cache. A list of available
storage handler can be obtained from *Note
`mysqlnd_qc_get_available_handlers':
apis-php-function.mysqlnd-qc-get-available-handlers.  Which storage are
available depends on the compile time configuration of the query cache
plugin. The `default' storage handler is always available.  All other
storage handler must be enabled explicitly when building the extension.

*Parameters*

  1. handler

     Handler can be of type string representing the name of a built-in
     storage handler or an object of type `mysqlnd_qc_handler_default'.
     The names of the built-in storage handler are `default', `APC',
     `MEMCACHE', `sqlite'.

*Return Values*

Returns

TRUE

on success or

FALSE

on failure.

If changing the storage handler fails a catchable fatal error will be
thrown. The query cache cannot operate if the previous storage handler
has been shutdown but no new storage handler has been installed.

*Examples*

The example shows the output from the built-in default storage handler.
Other storage handler may report different data.


     <?php
     var_dump(mysqlnd_qc_set_storage_handler("memcache"));

     if (true === mysqlnd_qc_set_storage_handler("default"))
       printf("Default storage handler activated");

     /* Catchable fatal error */
     var_dump(mysqlnd_qc_set_storage_handler("unknown"));
     ?>

The above examples will output:


     bool(true)
     Default storage handler activated
     Catchable fatal error: mysqlnd_qc_set_storage_handler(): Unknown handler 'unknown' in (file) on line (line)

*See Also*

*Note Installation: apis-php-mysqlnd-qc.installation.

*Note `mysqlnd_qc_get_available_handlers':
apis-php-function.mysqlnd-qc-get-available-handlers.


File: manual.info,  Node: apis-php-function.mysqlnd-qc-set-user-handlers,  Prev: apis-php-function.mysqlnd-qc-set-storage-handler,  Up: apis-php-ref.mysqlnd-qc

22.9.3.29 `mysqlnd_qc_set_user_handlers'
........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_qc_set_user_handlers'

     Sets the callback functions for a user-defined procedural storage
     handler

*Description*

bool mysqlnd_qc_set_user_handlers

string get_hash

string find_query_in_cache

string return_to_cache

string add_query_to_cache_if_not_exists

string query_is_select

string update_query_run_time_stats

string get_stats

string clear_cache

Sets the callback functions for a user-defined procedural storage
handler.

*Parameters*

  1. get_hash

     Name of the user function implementing the storage handler
     `get_hash' functionality.

  2. find_query_in_cache

     Name of the user function implementing the storage handler
     `find_in_cache' functionality.

  3. return_to_cache

     Name of the user function implementing the storage handler
     `return_to_cache' functionality.

  4. add_query_to_cache_if_not_exists

     Name of the user function implementing the storage handler
     `add_query_to_cache_if_not_exists' functionality.

  5. query_is_select

     Name of the user function implementing the storage handler
     `query_is_select' functionality.

  6. update_query_run_time_stats

     Name of the user function implementing the storage handler
     `update_query_run_time_stats' functionality.

  7. get_stats

     Name of the user function implementing the storage handler
     `get_stats' functionality.

  8. clear_cache

     Name of the user function implementing the storage handler
     `clear_cache' functionality.

*Return Values*

Returns TRUE on success or FALSE on FAILURE.

*See Also*

*Note Procedural user-defined storage handler example:
apis-php-mysqlnd-qc.set-user-handlers.


File: manual.info,  Node: apis-php-mysqlnd-qc.changes,  Prev: apis-php-ref.mysqlnd-qc,  Up: apis-php-book.mysqlnd-qc

22.9.3.30 Change History
........................

* Menu:

* apis-php-mysqlnd-qc.changes-one-two::  PECL/mysqlnd_qc 1.2 series
* apis-php-mysqlnd-qc.changes-one-one::  PECL/mysqlnd_qc 1.1 series
* apis-php-mysqlnd-qc.changes-one-o::  PECL/mysqlnd_qc 1.0 series

Copyright 1997-2012 the PHP Documentation Group.

This change history is a high level summary of selected changes that
may impact applications and/or break backwards compatibility.

See also the `CHANGES' file in the source distribution for a complete
list of changes.


File: manual.info,  Node: apis-php-mysqlnd-qc.changes-one-two,  Next: apis-php-mysqlnd-qc.changes-one-one,  Prev: apis-php-mysqlnd-qc.changes,  Up: apis-php-mysqlnd-qc.changes

22.9.3.31 PECL/mysqlnd_qc 1.2 series
....................................

Copyright 1997-2012 the PHP Documentation Group.

1.2.0 - alpha

   * Release date: 03/2013

   * Motto/theme: PHP 5.5 compatibility

Feature changes

   * Update build for PHP 5.5 (Credits: Remi Collet)

   * APC storage handler update

        * Fix build for APC 3.1.13-beta and trunk

   * Introduced

     MYSQLND_QC_VERSION

     and

     MYSQLND_QC_VERSION_ID

     .


File: manual.info,  Node: apis-php-mysqlnd-qc.changes-one-one,  Next: apis-php-mysqlnd-qc.changes-one-o,  Prev: apis-php-mysqlnd-qc.changes-one-two,  Up: apis-php-mysqlnd-qc.changes

22.9.3.32 PECL/mysqlnd_qc 1.1 series
....................................

Copyright 1997-2012 the PHP Documentation Group.

1.1.0 - stable

   * Release date: 04/2012

   * Motto/theme: PHP 5.4 compatibility, schema pattern based caching
     and mysqlnd_ms support

1.1.0 - beta

   * Release date: 04/2012

   * Motto/theme: PHP 5.4 compatibility, schema pattern based caching
     and mysqlnd_ms support

1.1.0 - alpha

   * Release date: 04/2012

   * Motto/theme: PHP 5.4 compatibility, schema pattern based caching
     and mysqlnd_ms support

Feature changes

   * APC storage handler update

        * Fix build for APC 3.1.9+

        * Note: Use of the APC storage handler is currently not
          recommended due to stability issues of APC itself.

   * New PHP configuration directives

        * ` mysqlnd_qc.collect_statistics_log_file'. Aggregated cache
          statistics log file written after every 10th request served
          by the PHP process.

        * ` mysqlnd_qc.ignore_sql_comments'.  Control whether SQL
          comments are ignored for cache key hash generation.

   * New constants and SQL hints

        * MYSQLND_QC_SERVER_ID_SWITCH allows grouping of cache entries
          from different physical connections. This is needed by
          PECL/mysqlnd_ms.

        * MYSQLND_QC_CONDITION_META_SCHEMA_PATTERN to be used with
          *Note ` mysqlnd_qc_set_cache_condition' (http://www.php.net/
          mysqlnd_qc_set_cache_condition):
          apis-php-function.mysqlnd-qc-set-cache-condition.

   * New function *Note ` mysqlnd_qc_set_cache_condition'
     (http://www.php.net/ mysqlnd_qc_set_cache_condition):
     apis-php-function.mysqlnd-qc-set-cache-condition.  for built-in
     schema pattern based caching. Likely to support a wider range of
     conditions in the future.

   * Report `valid_until' timestamp for cache entries of the default
     handler through *Note `mysqlnd_qc_get_cache_info':
     apis-php-function.mysqlnd-qc-get-cache-info.

   * Include charset number for cache entry hashing. This should
     prevent serving result sets which have the wrong charset.

     API change: get_hash_key expects new "charsetnr" (int) parameter
     after "port".

   * API change: changing is_select() signature from bool is_select()
     to mixed is_select(). Mixed can be either boolean or array(long
     ttl, string server_id). This is needed by PECL/mysqlnd_ms.

Other

   * Support acting as a cache backend for *Note PECL/mysqlnd_ms:
     apis-php-book.mysqlnd-ms.  1.3.0-beta or later to transparently
     replace MySQL Replication slave reads with cache accesses, if the
     user explicitly allows.

Bug fixes

   * Fixed Bug #59959 (config.m4, wrong library - 64bit memcached
     handler builds) (Credits: Remi Collet)


File: manual.info,  Node: apis-php-mysqlnd-qc.changes-one-o,  Prev: apis-php-mysqlnd-qc.changes-one-one,  Up: apis-php-mysqlnd-qc.changes

22.9.3.33 PECL/mysqlnd_qc 1.0 series
....................................

Copyright 1997-2012 the PHP Documentation Group.

1.0.1-stable

   * Release date: 12/2010

   * Motto/theme: Prepared statement support

Added support for Prepared statements and unbuffered queries.

1.0.0-beta

   * Release date: 07/2010

   * Motto/theme: TTL-based cache with various storage options
     (Memcache, APC, SQLite, user-defined)

Initial public release of the transparent TTL-based query result cache.
Flexible storage of cached results. Various storage media supported.


File: manual.info,  Node: apis-php-book.mysqlnd-uh,  Next: apis-php-book.mysqlnd-mux,  Prev: apis-php-book.mysqlnd-qc,  Up: apis-php

22.9.4 Mysqlnd user handler plugin (`mysqlnd_uh')
-------------------------------------------------

* Menu:

* apis-php-mysqlnd-uh.security::  Security considerations
* apis-php-mysqlnd-uh.docs-note::  Documentation note
* apis-php-mysqlnd-uh.name::     On the name
* apis-php-mysqlnd-uh.quickstart::  Quickstart and Examples
* apis-php-mysqlnd-uh.setup::    Installing/Configuring
* apis-php-mysqlnd-uh.constants::  Predefined Constants
* apis-php-class.mysqlnduhconnection::  The MysqlndUhConnection class (`MysqlndUhConnection')
* apis-php-class.mysqlnduhpreparedstatement::  The MysqlndUhPreparedStatement class (`MysqlndUhPreparedStatement')
* apis-php-ref.mysqlnd-uh::      Mysqlnd_uh Functions
* apis-php-mysqlnd-uh.changes::  Change History

Copyright 1997-2012 the PHP Documentation Group.

The mysqlnd user handler plugin (`mysqlnd_uh') allows users to set
hooks for most internal calls of the MySQL native driver for PHP (`See
section "apis-php-mysqli" in the online manual').  Mysqlnd and its
plugins, including PECL/mysqlnd_uh, operate on a layer beneath the PHP
MySQL extensions. A mysqlnd plugin can be considered as a proxy between
the PHP MySQL extensions and the MySQL server as part of the PHP
executable on the client-side. Because the plugins operates on their
own layer below the PHP MySQL extensions, they can monitor and change
application actions without requiring application changes. If the PHP
MySQL extensions (mysqli, mysql, See section "apis-php-ref.pdo-mysql"
in the online manual) are compiled to use `mysqlnd' this can be used
for:

   * Monitoring

        * Queries executed by any of the PHP MySQL extensions

        * Prepared statements executing by any of the PHP MySQL
          extensions

   * Auditing

        * Detection of database usage

        * SQL injection protection using black and white lists

   * Assorted

        * Load Balancing connections

The MySQL native driver for PHP (See section "apis-php-mysqli" in the
online manual) features an internal plugin C API. C plugins, such as
the mysqlnd user handler plugin, can extend the functionality of See
section "apis-php-mysqli" in the online manual. PECL/mysqlnd_uh makes
parts of the internal plugin C API available to the PHP user for plugin
development with PHP.

*Status*:

The mysqlnd user handler plugin is in alpha status. Take appropriate
care before using it in production environments.


File: manual.info,  Node: apis-php-mysqlnd-uh.security,  Next: apis-php-mysqlnd-uh.docs-note,  Prev: apis-php-book.mysqlnd-uh,  Up: apis-php-book.mysqlnd-uh

22.9.4.1 Security considerations
................................

Copyright 1997-2012 the PHP Documentation Group.

PECL/mysqlnd_uh gives users access to MySQL user names, MySQL password
used by any of the PHP MySQL extensions to connect to MySQL. It allows
monitoring of all queries and prepared statements exposing the
statement string to the user. Therefore, the extension should be
installed with care. The `PHP_INI_SYSTEM' configuration setting
`mysqlnd_uh.enable' can be used to prevent users from hooking mysqlnd
calls.

Code obfuscators and similar technologies are not suitable to prevent
monitoring of mysqlnd library activities if PECL/mysqlnd_uh is made
available and the user can install a proxy, for example, using
auto_prepend_file (http://www.php.net/ini.auto-prepend-file).


File: manual.info,  Node: apis-php-mysqlnd-uh.docs-note,  Next: apis-php-mysqlnd-uh.name,  Prev: apis-php-mysqlnd-uh.security,  Up: apis-php-book.mysqlnd-uh

22.9.4.2 Documentation note
...........................

Copyright 1997-2012 the PHP Documentation Group.

Many of the mysqlnd_uh functions are briefly described because the
mysqli extension is a thin abstraction layer on top of the MySQL C API
that the `mysqlnd' library provides. Therefore, the corresponding mysqli
documentation (along with the MySQL reference manual) can be consulted
to receive more information about a particular function.


File: manual.info,  Node: apis-php-mysqlnd-uh.name,  Next: apis-php-mysqlnd-uh.quickstart,  Prev: apis-php-mysqlnd-uh.docs-note,  Up: apis-php-book.mysqlnd-uh

22.9.4.3 On the name
....................

Copyright 1997-2012 the PHP Documentation Group.

The shortcut `mysqlnd_uh' stands for `mysqlnd user handler', and has
been the name since early development.


File: manual.info,  Node: apis-php-mysqlnd-uh.quickstart,  Next: apis-php-mysqlnd-uh.setup,  Prev: apis-php-mysqlnd-uh.name,  Up: apis-php-book.mysqlnd-uh

22.9.4.4 Quickstart and Examples
................................

* Menu:

* apis-php-mysqlnd-uh.quickstart.configuration::  Setup
* apis-php-mysqlnd-uh.quickstart.how-it-works::  How it works
* apis-php-mysqlnd-uh.quickstart.proxy-installation::  Installing a proxy
* apis-php-mysqlnd-uh.quickstart.query-monitoring::  Basic query monitoring

Copyright 1997-2012 the PHP Documentation Group.

The mysqlnd user handler plugin can be understood as a client-side
proxy for all PHP MySQL extensions (mysqli, mysql, See section
"apis-php-ref.pdo-mysql" in the online manual), if they are compiled to
use the See section "apis-php-mysqli" in the online manual library. The
extensions use the `mysqlnd' library internally, at the C level, to
communicate with the MySQL server.  PECL/mysqlnd_uh allows it to hook
many `mysqlnd' calls. Therefore, most activities of the PHP MySQL
extensions can be monitored.

Because monitoring happens at the level of the library, at a layer
below the application, it is possible to monitor applications without
changing them.

On the C level, the `mysqlnd' library is structured in modules or
classes. The extension hooks almost all methods of the `mysqlnd'
internal `connection' class and exposes them through the user space
class MysqlndUhConnection. Some few methods of the mysqlnd internal
`statement' class are made available to the PHP user with the class
MysqlndUhPreparedStatement. By subclassing the classes
MysqlndUhConnection and MysqlndUhPreparedStatement users get access to
`mysqlnd' internal function calls.

*Note*:

The internal `mysqlnd' function calls are not designed to be exposed to
the PHP user. Manipulating their activities may cause PHP to crash or
leak memory. Often, this is not considered a bug. Please, keep in mind
that you are accessing C library functions through PHP which are
expected to take certain actions, which you may not be able to emulate
in user space. Therefore, it is strongly recommended to always call the
parent method implementation when subclassing MysqlndUhConnection or
MysqlndUhPreparedStatement. To prevent the worst case, the extension
performs some sanity checks.  Please, see also the *Note Mysqlnd_uh
Configure Options: apis-php-mysqlnd-uh.configuration.


File: manual.info,  Node: apis-php-mysqlnd-uh.quickstart.configuration,  Next: apis-php-mysqlnd-uh.quickstart.how-it-works,  Prev: apis-php-mysqlnd-uh.quickstart,  Up: apis-php-mysqlnd-uh.quickstart

22.9.4.5 Setup
..............

Copyright 1997-2012 the PHP Documentation Group.

The plugin is implemented as a PHP extension. See the *Note
installation instructions: apis-php-mysqlnd-uh.installation. to install
the PECL/mysqlnd_uh (http://pecl.php.net/package/mysqlnd_ms) extension.
Then, load the extension into PHP and activate the plugin in the PHP
configuration file using the PHP configuration directive named
mysqlnd_uh.enable.  The below example shows the default settings of the
extension.


     mysqlnd_uh.enable=1
     mysqlnd_uh.report_wrong_types=1


File: manual.info,  Node: apis-php-mysqlnd-uh.quickstart.how-it-works,  Next: apis-php-mysqlnd-uh.quickstart.proxy-installation,  Prev: apis-php-mysqlnd-uh.quickstart.configuration,  Up: apis-php-mysqlnd-uh.quickstart

22.9.4.6 How it works
.....................

Copyright 1997-2012 the PHP Documentation Group.

This describes the background and inner workings of the mysqlnd_uh
extension.

Two classes are provided by the extension: MysqlndUhConnection and
MysqlndUhPreparedStatement.  MysqlndUhConnection lets you access almost
all methods of the `mysqlnd' internal `connection' class. The latter
exposes some selected methods of the `mysqlnd' internal `statement'
class. For example, *Note `MysqlndUhConnection::connect':
apis-php-mysqlnduhconnection.connect.  maps to the `mysqlnd' library C
function `mysqlnd_conn__connect'.

As a mysqlnd plugin, the PECL/mysqlnd_uh extension replaces `mysqlnd'
library C functions with its own functions. Whenever a PHP MySQL
extension compiled to use `mysqlnd' calls a mysqlnd function, the
functions installed by the plugin are executed instead of the original
`mysqlnd' ones. For example, `mysqli_connect' invokes
`mysqlnd_conn__connect', so the connect function installed by
PECL/mysqlnd_uh will be called. The functions installed by
PECL/mysqlnd_uh are the methods of the built-in classes.

The built-in PHP classes and their methods do nothing but call their
`mysqlnd' C library counterparts, to behave exactly like the original
`mysqlnd' function they replace. The code below illustrates in
pseudo-code what the extension does.


     class MysqlndUhConnection {
       public function connect(($conn, $host, $user, $passwd, $db, $port, $socket, $mysql_flags) {
         MYSQLND* c_mysqlnd_connection = convert_from_php_to_c($conn);
         ...
         return call_c_function(mysqlnd_conn__connect(c_mysqlnd_connection, ...));
       }
     }

The build-in classes behave like a transparent proxy. It is possible
for you to replace the proxy with your own. This is done by subclassing
MysqlndUhConnection or MysqlndUhPreparedStatement to extend the
functionality of the proxy, followed by registering a new proxy object.
Proxy objects are installed by *Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.  and *Note
`mysqlnd_uh_set_statement_proxy':
apis-php-function.mysqlnd-uh-set-statement-proxy.


     <?php
     class proxy extends MysqlndUhConnection {
      public function connect($res, $host, $user, $passwd, $db, $port, $socket, $mysql_flags) {
        printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
        $ret = parent::connect($res, $host, $user, $passwd, $db, $port, $socket, $mysql_flags);
        printf("%s returns %s\n", __METHOD__, var_export($ret, true));
        return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     ?>

The above example will output:


     proxy::connect(array (
       0 => NULL,
       1 => 'localhost',
       2 => 'root',
       3 => '',
       4 => 'test',
       5 => 3306,
       6 => NULL,
       7 => 131072,
     ))
     proxy::connect returns true


File: manual.info,  Node: apis-php-mysqlnd-uh.quickstart.proxy-installation,  Next: apis-php-mysqlnd-uh.quickstart.query-monitoring,  Prev: apis-php-mysqlnd-uh.quickstart.how-it-works,  Up: apis-php-mysqlnd-uh.quickstart

22.9.4.7 Installing a proxy
...........................

Copyright 1997-2012 the PHP Documentation Group.

The extension provides two built-in classes: MysqlndUhConnection and
MysqlndUhPreparedStatement. The classes are used for hooking `mysqlnd'
library calls.  Their methods correspond to `mysqlnd' internal
functions. By default they act like a transparent proxy and do nothing
but call their `mysqlnd' counterparts.  By subclassing the classes you
can install your own proxy to monitor `mysqlnd'.

See also the *Note How it works:
apis-php-mysqlnd-uh.quickstart.how-it-works. guide to learn about the
inner workings of this extension.

Connection proxies are objects of the type MysqlndUhConnection.
Connection proxy objects are installed by *Note
`mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.  If you install the
built-in class MysqlndUhConnection as a proxy, nothing happens. It
behaves like a transparent proxy.


     <?php
     mysqlnd_uh_set_connection_proxy(new MysqlndUhConnection());
     $mysqli = new mysqli("localhost", "root", "", "test");
     ?>

The `PHP_INI_SYSTEM' configuration setting `mysqlnd_uh.enable' controls
whether a proxy may be set. If disabled, the extension will throw
errors of type `E_WARNING'


     mysqlnd_uh.enable=0


     <?php
     mysqlnd_uh_set_connection_proxy(new MysqlndUhConnection());
     $mysqli = new mysqli("localhost", "root", "", "test");
     ?>

The above example will output:


     PHP Warning:  MysqlndUhConnection::__construct(): (Mysqlnd User Handler) The plugin has been disabled by setting the configuration parameter mysqlnd_uh.enabled = false.  You must not use any of the base classes in %s on line %d
     PHP Warning:  mysqlnd_uh_set_connection_proxy(): (Mysqlnd User Handler) The plugin has been disabled by setting the configuration parameter mysqlnd_uh.enable = false. The proxy has not been installed  in %s on line %d

To monitor `mysqlnd', you have to write your own proxy object
subclassing MysqlndUhConnection. Please, see the function reference for
a the list of methods that can be subclassed. Alternatively, you can
use reflection to inspect the built-in MysqlndUhConnection.

Create a new class `proxy'. Derive it from the built-in class
MysqlndUhConnection.  Replace the *Note `MysqlndUhConnection::connect':
apis-php-mysqlnduhconnection.connect.  method. Print out the host
parameter value passed to the method.  Make sure that you call the
parent implementation of the `connect' method. Failing to do so may give
unexpected and undesired results, including memory leaks and crashes.

Register your proxy and open three connections using the PHP MySQL
extensions mysqli, mysql, See section "apis-php-ref.pdo-mysql" in the
online manual. If the extensions have been compiled to use the
`mysqlnd' library, the `proxy::connect' method will be called three
times, once for each connection opened.


     <?php
     class proxy extends MysqlndUhConnection {
       public function connect($res, $host, $user, $passwd, $db, $port, $socket, $mysql_flags) {
        printf("Connection opened to '%s'\n", $host);
        /* Always call the parent implementation! */
        return parent::connect($res, $host, $user, $passwd, $db, $port, $socket, $mysql_flags);
       }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysql = mysql_connect("localhost", "root", "");
     $pdo = new PDO("mysql:host=localhost;dbname=test", "root", "");
     ?>

The above example will output:


     Connection opened to 'localhost'
     Connection opened to 'localhost'
     Connection opened to 'localhost'

The use of prepared statement proxies follows the same pattern: create
a proxy object of the type MysqlndUhPreparedStatement and install the
proxy using *Note `mysqlnd_uh_set_statement_proxy':
apis-php-function.mysqlnd-uh-set-statement-proxy.


     <?php
     class stmt_proxy extends MysqlndUhPreparedStatement {
      public function prepare($res, $query) {
       printf("%s(%s)\n", __METHOD__, $query);
       return parent::prepare($res, $query);
      }
     }
     mysqlnd_uh_set_statement_proxy(new stmt_proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $stmt = $mysqli->prepare("SELECT 'mysqlnd hacking made easy' AS _msg FROM DUAL");
     ?>

The above example will output:


     stmt_proxy::prepare(SELECT 'mysqlnd hacking made easy' AS _msg FROM DUAL)


File: manual.info,  Node: apis-php-mysqlnd-uh.quickstart.query-monitoring,  Prev: apis-php-mysqlnd-uh.quickstart.proxy-installation,  Up: apis-php-mysqlnd-uh.quickstart

22.9.4.8 Basic query monitoring
...............................

Copyright 1997-2012 the PHP Documentation Group.

Basic monitoring of a query statement is easy with PECL/mysqlnd_uh.
Combined with `debug_print_backtrace'
(http://www.php.net/debug_print_backtrace) it can become a powerful
tool, for example, to find the origin of certain statement. This may be
desired when searching for slow queries but also after database
refactoring to find code still accessing deprecated databases or
tables. The latter may be a complicated matter to do otherwise,
especially if the application uses auto-generated queries.


     <?php
     class conn_proxy extends MysqlndUhConnection {
      public function query($res, $query) {
       debug_print_backtrace();
       return parent::query($res, $query);
      }
     }
     class stmt_proxy extends MysqlndUhPreparedStatement {
      public function prepare($res, $query) {
       debug_print_backtrace();
       return parent::prepare($res, $query);
      }
     }
     mysqlnd_uh_set_connection_proxy(new conn_proxy());
     mysqlnd_uh_set_statement_proxy(new stmt_proxy());

     printf("Proxies installed...\n");
     $pdo = new PDO("mysql:host=localhost;dbname=test", "root", "");
     var_dump($pdo->query("SELECT 1 AS _one FROM DUAL")->fetchAll(PDO::FETCH_ASSOC));

     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->prepare("SELECT 1 AS _two FROM DUAL");
     ?>

The above example will output:


     #0  conn_proxy->query(Resource id #19, SELECT 1 AS _one FROM DUAL)
     #1  PDO->query(SELECT 1 AS _one FROM DUAL) called at [example.php:19]
     array(1) {
       [0]=>
       array(1) {
         ["_one"]=>
         string(1) "1"
       }
     }
     #0  stmt_proxy->prepare(Resource id #753, SELECT 1 AS _two FROM DUAL)
     #1  mysqli->prepare(SELECT 1 AS _two FROM DUAL) called at [example.php:22]

For basic query monitoring you should install a connection and a
prepared statement proxy. The connection proxy should subclass *Note
`MysqlndUhConnection::query': apis-php-mysqlnduhconnection.query.  All
database queries not using native prepared statements will call this
method. In the example the `query' function is invoked by a PDO call.
By default, `PDO_MySQL' is using prepared statement emulation.

All native prepared statements are prepared with the `prepare' method
of `mysqlnd' exported through *Note
`MysqlndUhPreparedStatement::prepare':
apis-php-mysqlnduhpreparedstatement.prepare.  Subclass
MysqlndUhPreparedStatement and overwrite `prepare' for native prepared
statement monitoring.


File: manual.info,  Node: apis-php-mysqlnd-uh.setup,  Next: apis-php-mysqlnd-uh.constants,  Prev: apis-php-mysqlnd-uh.quickstart,  Up: apis-php-book.mysqlnd-uh

22.9.4.9 Installing/Configuring
...............................

* Menu:

* apis-php-mysqlnd-uh.requirements::  Requirements
* apis-php-mysqlnd-uh.installation::  Installation
* apis-php-mysqlnd-uh.configuration::  Runtime Configuration
* apis-php-mysqlnd-uh.resources::  Resource Types

Copyright 1997-2012 the PHP Documentation Group.


File: manual.info,  Node: apis-php-mysqlnd-uh.requirements,  Next: apis-php-mysqlnd-uh.installation,  Prev: apis-php-mysqlnd-uh.setup,  Up: apis-php-mysqlnd-uh.setup

22.9.4.10 Requirements
......................

Copyright 1997-2012 the PHP Documentation Group.

`PHP 5.3.3' or later. It is recommended to use `PHP 5.4.0' or later to
get access to the latest mysqlnd features.

The `mysqlnd_uh' user handler plugin supports all PHP applications and
all available PHP MySQL extensions (mysqli, mysql, See section
"apis-php-ref.pdo-mysql" in the online manual). The PHP MySQL extension
must be configured to use See section "apis-php-mysqli" in the online
manual in order to be able to use the `mysqlnd_uh' plugin for See
section "apis-php-mysqli" in the online manual.

The alpha versions makes use of some mysqli features. You must enable
mysqli to compile the plugin. This requirement may be removed in the
future. Note, that this requirement does not restrict you to use the
plugin only with `mysqli'. You can use the plugin to monitor `mysql',
`mysqli' and `PDO_MYSQL'.


File: manual.info,  Node: apis-php-mysqlnd-uh.installation,  Next: apis-php-mysqlnd-uh.configuration,  Prev: apis-php-mysqlnd-uh.requirements,  Up: apis-php-mysqlnd-uh.setup

22.9.4.11 Installation
......................

Copyright 1997-2012 the PHP Documentation Group.

Information for installing this PECL extension may be found in the
manual chapter titled Installation of PECL extensions
(http://www.php.net/install.pecl). Additional information such as new
releases, downloads, source files, maintainer information, and a
CHANGELOG, can be located here: http://pecl.php.net/package/mysqlnd-uh
(http://pecl.php.net/package/mysqlnd-uh)

PECL/mysqlnd_uh is currently not available on Windows. The source code
of the extension makes use of `C99' constructs not allowed with PHP
Windows builds.


File: manual.info,  Node: apis-php-mysqlnd-uh.configuration,  Next: apis-php-mysqlnd-uh.resources,  Prev: apis-php-mysqlnd-uh.installation,  Up: apis-php-mysqlnd-uh.setup

22.9.4.12 Runtime Configuration
...............................

Copyright 1997-2012 the PHP Documentation Group.

The behaviour of these functions is affected by settings in `php.ini'.

*Mysqlnd_uh Configure Options*

Name               Default            Changeable         Changelog
mysqlnd_uh.enable  1                  PHP_INI_SYSTEM     
mysqlnd_uh.report_wrong_types1                  PHP_INI_ALL        

Here's a short explanation of the configuration directives.

  1. mysqlnd_uh.enable integer

     Enables or disables the plugin. If set to disabled, the extension
     will not allow users to plug into See section "apis-php-mysqli" in
     the online manual to hook See section "apis-php-mysqli" in the
     online manual calls.

  2. mysqlnd_uh.report_wrong_types integer

     Whether to report wrong return value types of user hooks as

     E_WARNING

     level errors. This is recommended for detecting errors.


File: manual.info,  Node: apis-php-mysqlnd-uh.resources,  Prev: apis-php-mysqlnd-uh.configuration,  Up: apis-php-mysqlnd-uh.setup

22.9.4.13 Resource Types
........................

Copyright 1997-2012 the PHP Documentation Group.

This extension has no resource types defined.


File: manual.info,  Node: apis-php-mysqlnd-uh.constants,  Next: apis-php-class.mysqlnduhconnection,  Prev: apis-php-mysqlnd-uh.setup,  Up: apis-php-book.mysqlnd-uh

22.9.4.14 Predefined Constants
..............................

Copyright 1997-2012 the PHP Documentation Group.

The constants below are defined by this extension, and will only be
available when the extension has either been compiled into PHP or
dynamically loaded at runtime.

Most of the constants refer to details of the MySQL Client Server
Protocol. Please, refer to the MySQL reference manual to learn about
their meaning. To avoid content duplication, only short descriptions
are given.

_*Note `MysqlndUhConnection::simpleCommand':
apis-php-mysqlnduhconnection.simplecommand.  related_

The following constants can be used to detect what command is to be
send through *Note `MysqlndUhConnection::simpleCommand':
apis-php-mysqlnduhconnection.simplecommand.

  1. MYSQLND_UH_MYSQLND_COM_SLEEP

     (integer)

     MySQL Client Server protocol command: COM_SLEEP.

  2. MYSQLND_UH_MYSQLND_COM_QUIT

     (integer)

     MySQL Client Server protocol command: COM_QUIT.

  3. MYSQLND_UH_MYSQLND_COM_INIT_DB

     (integer)

     MySQL Client Server protocol command: COM_INIT_DB.

  4. MYSQLND_UH_MYSQLND_COM_QUERY

     (integer)

     MySQL Client Server protocol command: COM_QUERY.

  5. MYSQLND_UH_MYSQLND_COM_FIELD_LIST

     (integer)

     MySQL Client Server protocol command: COM_FIELD_LIST.

  6. MYSQLND_UH_MYSQLND_COM_CREATE_DB

     (integer)

     MySQL Client Server protocol command: COM_CREATE_DB.

  7. MYSQLND_UH_MYSQLND_COM_DROP_DB

     (integer)

     MySQL Client Server protocol command: COM_DROP_DB.

  8. MYSQLND_UH_MYSQLND_COM_REFRESH

     (integer)

     MySQL Client Server protocol command: COM_REFRESH.

  9. MYSQLND_UH_MYSQLND_COM_SHUTDOWN

     (integer)

     MySQL Client Server protocol command: COM_SHUTDOWN.

 10. MYSQLND_UH_MYSQLND_COM_STATISTICS

     (integer)

     MySQL Client Server protocol command: COM_STATISTICS.

 11. MYSQLND_UH_MYSQLND_COM_PROCESS_INFO

     (integer)

     MySQL Client Server protocol command: COM_PROCESS_INFO.

 12. MYSQLND_UH_MYSQLND_COM_CONNECT

     (integer)

     MySQL Client Server protocol command: COM_CONNECT.

 13. MYSQLND_UH_MYSQLND_COM_PROCESS_KILL

     (integer)

     MySQL Client Server protocol command: COM_PROCESS_KILL.

 14. MYSQLND_UH_MYSQLND_COM_DEBUG

     (integer)

     MySQL Client Server protocol command: COM_DEBUG.

 15. MYSQLND_UH_MYSQLND_COM_PING

     (integer)

     MySQL Client Server protocol command: COM_PING.

 16. MYSQLND_UH_MYSQLND_COM_TIME

     (integer)

     MySQL Client Server protocol command: COM_TIME.

 17. MYSQLND_UH_MYSQLND_COM_DELAYED_INSERT

     (integer)

     MySQL Client Server protocol command: COM_DELAYED_INSERT.

 18. MYSQLND_UH_MYSQLND_COM_CHANGE_USER

     (integer)

     MySQL Client Server protocol command: COM_CHANGE_USER.

 19. MYSQLND_UH_MYSQLND_COM_BINLOG_DUMP

     (integer)

     MySQL Client Server protocol command: COM_BINLOG_DUMP.

 20. MYSQLND_UH_MYSQLND_COM_TABLE_DUMP

     (integer)

     MySQL Client Server protocol command: COM_TABLE_DUMP.

 21. MYSQLND_UH_MYSQLND_COM_CONNECT_OUT

     (integer)

     MySQL Client Server protocol command: COM_CONNECT_OUT.

 22. MYSQLND_UH_MYSQLND_COM_REGISTER_SLAVED

     (integer)

     MySQL Client Server protocol command: COM_REGISTER_SLAVED.

 23. MYSQLND_UH_MYSQLND_COM_STMT_PREPARE

     (integer)

     MySQL Client Server protocol command: COM_STMT_PREPARE.

 24. MYSQLND_UH_MYSQLND_COM_STMT_EXECUTE

     (integer)

     MySQL Client Server protocol command: COM_STMT_EXECUTE.

 25. MYSQLND_UH_MYSQLND_COM_STMT_SEND_LONG_DATA

     (integer)

     MySQL Client Server protocol command: COM_STMT_SEND_LONG_DATA.

 26. MYSQLND_UH_MYSQLND_COM_STMT_CLOSE

     (integer)

     MySQL Client Server protocol command: COM_STMT_CLOSE.

 27. MYSQLND_UH_MYSQLND_COM_STMT_RESET

     (integer)

     MySQL Client Server protocol command: COM_STMT_RESET.

 28. MYSQLND_UH_MYSQLND_COM_SET_OPTION

     (integer)

     MySQL Client Server protocol command: COM_SET_OPTION.

 29. MYSQLND_UH_MYSQLND_COM_STMT_FETCH

     (integer)

     MySQL Client Server protocol command: COM_STMT_FETCH.

 30. MYSQLND_UH_MYSQLND_COM_DAEMON

     (integer)

     MySQL Client Server protocol command: COM_DAEMON.

 31. MYSQLND_UH_MYSQLND_COM_END

     (integer)

     MySQL Client Server protocol command: COM_END.

The following constants can be used to analyze the `ok_packet' argument
of *Note `MysqlndUhConnection::simpleCommand':
apis-php-mysqlnduhconnection.simplecommand.

  1. MYSQLND_UH_MYSQLND_PROT_GREET_PACKET

     (integer)

     MySQL Client Server protocol packet: greeting.

  2. MYSQLND_UH_MYSQLND_PROT_AUTH_PACKET

     (integer)

     MySQL Client Server protocol packet: authentication.

  3. MYSQLND_UH_MYSQLND_PROT_OK_PACKET

     (integer)

     MySQL Client Server protocol packet: OK.

  4. MYSQLND_UH_MYSQLND_PROT_EOF_PACKET

     (integer)

     MySQL Client Server protocol packet: EOF.

  5. MYSQLND_UH_MYSQLND_PROT_CMD_PACKET

     (integer)

     MySQL Client Server protocol packet: command.

  6. MYSQLND_UH_MYSQLND_PROT_RSET_HEADER_PACKET

     (integer)

     MySQL Client Server protocol packet: result set header.

  7. MYSQLND_UH_MYSQLND_PROT_RSET_FLD_PACKET

     (integer)

     MySQL Client Server protocol packet: resultset field.

  8. MYSQLND_UH_MYSQLND_PROT_ROW_PACKET

     (integer)

     MySQL Client Server protocol packet: row.

  9. MYSQLND_UH_MYSQLND_PROT_STATS_PACKET

     (integer)

     MySQL Client Server protocol packet: stats.

 10. MYSQLND_UH_MYSQLND_PREPARE_RESP_PACKET

     (integer)

     MySQL Client Server protocol packet: prepare response.

 11. MYSQLND_UH_MYSQLND_CHG_USER_RESP_PACKET

     (integer)

     MySQL Client Server protocol packet: change user response.

 12. MYSQLND_UH_MYSQLND_PROT_LAST

     (integer)

     No practical meaning. Last entry marker of internal C data
     structure list.

_*Note `MysqlndUhConnection::close': apis-php-mysqlnduhconnection.close.
related_

The following constants can be used to detect why a connection has been
closed through `MysqlndUhConnection::close()'.

  1. MYSQLND_UH_MYSQLND_CLOSE_EXPLICIT

     (integer)

     User has called mysqlnd to close the connection.

  2. MYSQLND_UH_MYSQLND_CLOSE_IMPLICIT

     (integer)

     Implicitly closed, for example, during garbage connection.

  3. MYSQLND_UH_MYSQLND_CLOSE_DISCONNECTED

     (integer)

     Connection error.

  4. MYSQLND_UH_MYSQLND_CLOSE_LAST

     (integer)

     No practical meaning. Last entry marker of internal C data
     structure list.

_MysqlndUhConnection::setServerOption() related_

The following constants can be used to detect which option is set
through `MysqlndUhConnection::setServerOption()'.

  1. MYSQLND_UH_SERVER_OPTION_MULTI_STATEMENTS_ON

     (integer)

     Option: enables multi statement support.

  2. MYSQLND_UH_SERVER_OPTION_MULTI_STATEMENTS_OFF

     (integer)

     Option: disables multi statement support.

_*Note `MysqlndUhConnection::setClientOption':
apis-php-mysqlnduhconnection.setclientoption.  related_

The following constants can be used to detect which option is set
through *Note `MysqlndUhConnection::setClientOption':
apis-php-mysqlnduhconnection.setclientoption.

  1. MYSQLND_UH_MYSQLND_OPTION_OPT_CONNECT_TIMEOUT

     (integer)

     Option: connection timeout.

  2. MYSQLND_UH_MYSQLND_OPTION_OPT_COMPRESS

     (integer)

     Option: whether the MySQL compressed protocol is to be used.

  3. MYSQLND_UH_MYSQLND_OPTION_OPT_NAMED_PIPE

     (integer)

     Option: named pipe to use for connection (Windows).

  4. MYSQLND_UH_MYSQLND_OPTION_INIT_COMMAND

     (integer)

     Option: init command to execute upon connect.

  5. MYSQLND_UH_MYSQLND_READ_DEFAULT_FILE

     (integer)

     Option: MySQL server default file to read upon connect.

  6. MYSQLND_UH_MYSQLND_READ_DEFAULT_GROUP

     (integer)

     Option: MySQL server default file group to read upon connect.

  7. MYSQLND_UH_MYSQLND_SET_CHARSET_DIR

     (integer)

     Option: charset description files directory.

  8. MYSQLND_UH_MYSQLND_SET_CHARSET_NAME

     (integer)

     Option: charset name.

  9. MYSQLND_UH_MYSQLND_OPT_LOCAL_INFILE

     (integer)

     Option: Whether to allow `LOAD DATA LOCAL INFILE' use.

 10. MYSQLND_UH_MYSQLND_OPT_PROTOCOL

     (integer)

     Option: supported protocol version.

 11. MYSQLND_UH_MYSQLND_SHARED_MEMORY_BASE_NAME

     (integer)

     Option: shared memory base name for shared memory connections.

 12. MYSQLND_UH_MYSQLND_OPT_READ_TIMEOUT

     (integer)

     Option: connection read timeout.

 13. MYSQLND_UH_MYSQLND_OPT_WRITE_TIMEOUT

     (integer)

     Option: connection write timeout.

 14. MYSQLND_UH_MYSQLND_OPT_USE_RESULT

     (integer)

     Option: unbuffered result sets.

 15. MYSQLND_UH_MYSQLND_OPT_USE_REMOTE_CONNECTION

     (integer)

     Embedded server related.

 16. MYSQLND_UH_MYSQLND_OPT_USE_EMBEDDED_CONNECTION

     (integer)

     Embedded server related.

 17. MYSQLND_UH_MYSQLND_OPT_GUESS_CONNECTION

     (integer)

     TODO

 18. MYSQLND_UH_MYSQLND_SET_CLIENT_IP

     (integer)

     TODO

 19. MYSQLND_UH_MYSQLND_SECURE_AUTH

     (integer)

     TODO

 20. MYSQLND_UH_MYSQLND_REPORT_DATA_TRUNCATION

     (integer)

     Option: Whether to report data truncation.

 21. MYSQLND_UH_MYSQLND_OPT_RECONNECT

     (integer)

     Option: Whether to reconnect automatically.

 22. MYSQLND_UH_MYSQLND_OPT_SSL_VERIFY_SERVER_CERT

     (integer)

     Option: TODO

 23. MYSQLND_UH_MYSQLND_OPT_NET_CMD_BUFFER_SIZE

     (integer)

     Option: mysqlnd network buffer size for commands.

 24. MYSQLND_UH_MYSQLND_OPT_NET_READ_BUFFER_SIZE

     (integer)

     Option: mysqlnd network buffer size for reading from the server.

 25. MYSQLND_UH_MYSQLND_OPT_SSL_KEY

     (integer)

     Option: SSL key.

 26. MYSQLND_UH_MYSQLND_OPT_SSL_CERT

     (integer)

     Option: SSL certificate.

 27. MYSQLND_UH_MYSQLND_OPT_SSL_CA

     (integer)

     Option: SSL CA.

 28. MYSQLND_UH_MYSQLND_OPT_SSL_CAPATH

     (integer)

     Option: Path to SSL CA.

 29. MYSQLND_UH_MYSQLND_OPT_SSL_CIPHER

     (integer)

     Option: SSL cipher.

 30. MYSQLND_UH_MYSQLND_OPT_SSL_PASSPHRASE

     (integer)

     Option: SSL passphrase.

 31. MYSQLND_UH_SERVER_OPTION_PLUGIN_DIR

     (integer)

     Option: server plugin directory.

 32. MYSQLND_UH_SERVER_OPTION_DEFAULT_AUTH

     (integer)

     Option: default authentication method.

 33. MYSQLND_UH_SERVER_OPTION_SET_CLIENT_IP

     (integer)

     TODO

 34. MYSQLND_UH_MYSQLND_OPT_MAX_ALLOWED_PACKET

     (integer)

     Option: maximum allowed packet size. Available as of `PHP 5.4.0'.

 35. MYSQLND_UH_MYSQLND_OPT_AUTH_PROTOCOL

     (integer)

     Option: TODO. Available as of `PHP 5.4.0'.

 36. MYSQLND_UH_MYSQLND_OPT_INT_AND_FLOAT_NATIVE

     (integer)

     Option: make mysqlnd return integer and float columns as long even
     when using the MySQL Client Server text protocol. Only available
     with a custom build of mysqlnd.

_Other_

The plugins version number can be obtained using

MYSQLND_UH_VERSION

or

MYSQLND_UH_VERSION_ID

.

MYSQLND_UH_VERSION

is the string representation of the numerical version number

MYSQLND_UH_VERSION_ID

, which is an integer such as 10000. Developers can calculate the
version number as follows.

Unknown PHP API feature.

Version (part)                       Example
Major*10000                          1*10000 = 10000
Minor*100                            0*100 = 0
Patch                                0 = 0
MYSQLND_UH_VERSION_ID                10000

  1. MYSQLND_UH_VERSION

     (string)

     Plugin version string, for example, `1.0.0-alpha'.

  2. MYSQLND_UH_VERSION_ID

     (integer)

     Plugin version number, for example, 10000.


File: manual.info,  Node: apis-php-class.mysqlnduhconnection,  Next: apis-php-class.mysqlnduhpreparedstatement,  Prev: apis-php-mysqlnd-uh.constants,  Up: apis-php-book.mysqlnd-uh

22.9.4.15 The MysqlndUhConnection class (`MysqlndUhConnection')
...............................................................

* Menu:

* apis-php-mysqlnduhconnection.changeuser::  `MysqlndUhConnection::changeUser'
* apis-php-mysqlnduhconnection.charsetname::  `MysqlndUhConnection::charsetName'
* apis-php-mysqlnduhconnection.close::  `MysqlndUhConnection::close'
* apis-php-mysqlnduhconnection.connect::  `MysqlndUhConnection::connect'
* apis-php-mysqlnduhconnection.construct::  `MysqlndUhConnection::__construct'
* apis-php-mysqlnduhconnection.endpsession::  `MysqlndUhConnection::endPSession'
* apis-php-mysqlnduhconnection.escapestring::  `MysqlndUhConnection::escapeString'
* apis-php-mysqlnduhconnection.getaffectedrows::  `MysqlndUhConnection::getAffectedRows'
* apis-php-mysqlnduhconnection.geterrornumber::  `MysqlndUhConnection::getErrorNumber'
* apis-php-mysqlnduhconnection.geterrorstring::  `MysqlndUhConnection::getErrorString'
* apis-php-mysqlnduhconnection.getfieldcount::  `MysqlndUhConnection::getFieldCount'
* apis-php-mysqlnduhconnection.gethostinformation::  `MysqlndUhConnection::getHostInformation'
* apis-php-mysqlnduhconnection.getlastinsertid::  `MysqlndUhConnection::getLastInsertId'
* apis-php-mysqlnduhconnection.getlastmessage::  `MysqlndUhConnection::getLastMessage'
* apis-php-mysqlnduhconnection.getprotocolinformation::  `MysqlndUhConnection::getProtocolInformation'
* apis-php-mysqlnduhconnection.getserverinformation::  `MysqlndUhConnection::getServerInformation'
* apis-php-mysqlnduhconnection.getserverstatistics::  `MysqlndUhConnection::getServerStatistics'
* apis-php-mysqlnduhconnection.getserverversion::  `MysqlndUhConnection::getServerVersion'
* apis-php-mysqlnduhconnection.getsqlstate::  `MysqlndUhConnection::getSqlstate'
* apis-php-mysqlnduhconnection.getstatistics::  `MysqlndUhConnection::getStatistics'
* apis-php-mysqlnduhconnection.getthreadid::  `MysqlndUhConnection::getThreadId'
* apis-php-mysqlnduhconnection.getwarningcount::  `MysqlndUhConnection::getWarningCount'
* apis-php-mysqlnduhconnection.init::  `MysqlndUhConnection::init'
* apis-php-mysqlnduhconnection.killconnection::  `MysqlndUhConnection::killConnection'
* apis-php-mysqlnduhconnection.listfields::  `MysqlndUhConnection::listFields'
* apis-php-mysqlnduhconnection.listmethod::  `MysqlndUhConnection::listMethod'
* apis-php-mysqlnduhconnection.moreresults::  `MysqlndUhConnection::moreResults'
* apis-php-mysqlnduhconnection.nextresult::  `MysqlndUhConnection::nextResult'
* apis-php-mysqlnduhconnection.ping::  `MysqlndUhConnection::ping'
* apis-php-mysqlnduhconnection.query::  `MysqlndUhConnection::query'
* apis-php-mysqlnduhconnection.queryreadresultsetheader::  `MysqlndUhConnection::queryReadResultsetHeader'
* apis-php-mysqlnduhconnection.reapquery::  `MysqlndUhConnection::reapQuery'
* apis-php-mysqlnduhconnection.refreshserver::  `MysqlndUhConnection::refreshServer'
* apis-php-mysqlnduhconnection.restartpsession::  `MysqlndUhConnection::restartPSession'
* apis-php-mysqlnduhconnection.selectdb::  `MysqlndUhConnection::selectDb'
* apis-php-mysqlnduhconnection.sendclose::  `MysqlndUhConnection::sendClose'
* apis-php-mysqlnduhconnection.sendquery::  `MysqlndUhConnection::sendQuery'
* apis-php-mysqlnduhconnection.serverdumpdebuginformation::  `MysqlndUhConnection::serverDumpDebugInformation'
* apis-php-mysqlnduhconnection.setautocommit::  `MysqlndUhConnection::setAutocommit'
* apis-php-mysqlnduhconnection.setcharset::  `MysqlndUhConnection::setCharset'
* apis-php-mysqlnduhconnection.setclientoption::  `MysqlndUhConnection::setClientOption'
* apis-php-mysqlnduhconnection.setserveroption::  `MysqlndUhConnection::setServerOption'
* apis-php-mysqlnduhconnection.shutdownserver::  `MysqlndUhConnection::shutdownServer'
* apis-php-mysqlnduhconnection.simplecommand::  `MysqlndUhConnection::simpleCommand'
* apis-php-mysqlnduhconnection.simplecommandhandleresponse::  `MysqlndUhConnection::simpleCommandHandleResponse'
* apis-php-mysqlnduhconnection.sslset::  `MysqlndUhConnection::sslSet'
* apis-php-mysqlnduhconnection.stmtinit::  `MysqlndUhConnection::stmtInit'
* apis-php-mysqlnduhconnection.storeresult::  `MysqlndUhConnection::storeResult'
* apis-php-mysqlnduhconnection.txcommit::  `MysqlndUhConnection::txCommit'
* apis-php-mysqlnduhconnection.txrollback::  `MysqlndUhConnection::txRollback'
* apis-php-mysqlnduhconnection.useresult::  `MysqlndUhConnection::useResult'

Copyright 1997-2012 the PHP Documentation Group.

MysqlndUhConnection MysqlndUhConnection

Methods

public boolMysqlndUhConnection::changeUser

mysqlnd_connectionconnection

stringuser

stringpassword

stringdatabase

boolsilent

intpasswd_len

public stringMysqlndUhConnection::charsetName

mysqlnd_connectionconnection

public boolMysqlndUhConnection::close

mysqlnd_connectionconnection

intclose_type

public boolMysqlndUhConnection::connect

mysqlnd_connectionconnection

stringhost

stringuse"

stringpassword

stringdatabase

intport

stringsocket

intmysql_flags

public MysqlndUhConnection::__construct

public boolMysqlndUhConnection::endPSession

mysqlnd_connectionconnection

public stringMysqlndUhConnection::escapeString

mysqlnd_connectionconnection

stringescape_string

public intMysqlndUhConnection::getAffectedRows

mysqlnd_connectionconnection

public intMysqlndUhConnection::getErrorNumber

mysqlnd_connectionconnection

public stringMysqlndUhConnection::getErrorString

mysqlnd_connectionconnection

public intMysqlndUhConnection::getFieldCount

mysqlnd_connectionconnection

public stringMysqlndUhConnection::getHostInformation

mysqlnd_connectionconnection

public intMysqlndUhConnection::getLastInsertId

mysqlnd_connectionconnection

public voidMysqlndUhConnection::getLastMessage

mysqlnd_connectionconnection

public stringMysqlndUhConnection::getProtocolInformation

mysqlnd_connectionconnection

public stringMysqlndUhConnection::getServerInformation

mysqlnd_connectionconnection

public stringMysqlndUhConnection::getServerStatistics

mysqlnd_connectionconnection

public intMysqlndUhConnection::getServerVersion

mysqlnd_connectionconnection

public stringMysqlndUhConnection::getSqlstate

mysqlnd_connectionconnection

public arrayMysqlndUhConnection::getStatistics

mysqlnd_connectionconnection

public intMysqlndUhConnection::getThreadId

mysqlnd_connectionconnection

public intMysqlndUhConnection::getWarningCount

mysqlnd_connectionconnection

public boolMysqlndUhConnection::init

mysqlnd_connectionconnection

public boolMysqlndUhConnection::killConnection

mysqlnd_connectionconnection

intpid

public arrayMysqlndUhConnection::listFields

mysqlnd_connectionconnection

stringtable

stringachtung_wild

public voidMysqlndUhConnection::listMethod

mysqlnd_connectionconnection

stringquery

stringachtung_wild

stringpar1

public boolMysqlndUhConnection::moreResults

mysqlnd_connectionconnection

public boolMysqlndUhConnection::nextResult

mysqlnd_connectionconnection

public boolMysqlndUhConnection::ping

mysqlnd_connectionconnection

public boolMysqlndUhConnection::query

mysqlnd_connectionconnection

stringquery

public boolMysqlndUhConnection::queryReadResultsetHeader

mysqlnd_connectionconnection

mysqlnd_statementmysqlnd_stmt

public boolMysqlndUhConnection::reapQuery

mysqlnd_connectionconnection

public boolMysqlndUhConnection::refreshServer

mysqlnd_connectionconnection

intoptions

public boolMysqlndUhConnection::restartPSession

mysqlnd_connectionconnection

public boolMysqlndUhConnection::selectDb

mysqlnd_connectionconnection

stringdatabase

public boolMysqlndUhConnection::sendClose

mysqlnd_connectionconnection

public boolMysqlndUhConnection::sendQuery

mysqlnd_connectionconnection

stringquery

public boolMysqlndUhConnection::serverDumpDebugInformation

mysqlnd_connectionconnection

public boolMysqlndUhConnection::setAutocommit

mysqlnd_connectionconnection

intmode

public boolMysqlndUhConnection::setCharset

mysqlnd_connectionconnection

stringcharset

public boolMysqlndUhConnection::setClientOption

mysqlnd_connectionconnection

intoption

intvalue

public voidMysqlndUhConnection::setServerOption

mysqlnd_connectionconnection

intoption

public voidMysqlndUhConnection::shutdownServer

stringMYSQLND_UH_RES_MYSQLND_NAME

string"level"

public boolMysqlndUhConnection::simpleCommand

mysqlnd_connectionconnection

intcommand

stringarg

intok_packet

boolsilent

boolignore_upsert_status

public boolMysqlndUhConnection::simpleCommandHandleResponse

mysqlnd_connectionconnection

intok_packet

boolsilent

intcommand

boolignore_upsert_status

public boolMysqlndUhConnection::sslSet

mysqlnd_connectionconnection

stringkey

stringcert

stringca

stringcapath

stringcipher

public resourceMysqlndUhConnection::stmtInit

mysqlnd_connectionconnection

public resourceMysqlndUhConnection::storeResult

mysqlnd_connectionconnection

public boolMysqlndUhConnection::txCommit

mysqlnd_connectionconnection

public boolMysqlndUhConnection::txRollback

mysqlnd_connectionconnection

public resourceMysqlndUhConnection::useResult

mysqlnd_connectionconnection


File: manual.info,  Node: apis-php-mysqlnduhconnection.changeuser,  Next: apis-php-mysqlnduhconnection.charsetname,  Prev: apis-php-class.mysqlnduhconnection,  Up: apis-php-class.mysqlnduhconnection

22.9.4.16 `MysqlndUhConnection::changeUser'
...........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::changeUser'

     Changes the user of the specified mysqlnd database connection

*Description*

public boolMysqlndUhConnection::changeUser

mysqlnd_connectionconnection

stringuser

stringpassword

stringdatabase

boolsilent

intpasswd_len

Changes the user of the specified mysqlnd database connection

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

  2. user

     The MySQL user name.

  3. password

     The MySQL password.

  4. database

     The MySQL database to change to.

  5. silent

     Controls if mysqlnd is allowed to emit errors or not.

  6. passwd_len

     Length of the MySQL password.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      /* Hook mysqlnd's connection::change_user call */
      public function changeUser($res, $user, $passwd, $db, $silent, $passwd_len) {
        printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
        $ret = parent::changeUser($res, $user, $passwd, $db, $silent, $passwd_len);
        printf("%s returns %s\n", __METHOD__, var_export($ret, true));
        return $ret;
      }
     }
     /* Install proxy/hooks to be used with all future mysqlnd connection */
     mysqlnd_uh_set_connection_proxy(new proxy());

     /* Create mysqli connection which is using the mysqlnd library */
     $mysqli = new mysqli("localhost", "root", "", "test");

     /* Example of a user API call which triggers the hooked mysqlnd call */
     var_dump($mysqli->change_user("root", "bar", "test"));
     ?>

The above example will output:


     proxy::changeUser(array (
       0 => NULL,
       1 => 'root',
       2 => 'bar',
       3 => 'test',
       4 => false,
       5 => 3,
     ))
     proxy::changeUser returns false
     bool(false)

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_change_user'


File: manual.info,  Node: apis-php-mysqlnduhconnection.charsetname,  Next: apis-php-mysqlnduhconnection.close,  Prev: apis-php-mysqlnduhconnection.changeuser,  Up: apis-php-class.mysqlnduhconnection

22.9.4.17 `MysqlndUhConnection::charsetName'
............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::charsetName'

     Returns the default character set for the database connection

*Description*

public stringMysqlndUhConnection::charsetName

mysqlnd_connectionconnection

Returns the default character set for the database connection.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

The default character set.

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
       public function charsetName($res) {
        printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
        $ret = parent::charsetName($res);
        printf("%s returns %s\n", __METHOD__, var_export($ret, true));
        return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     var_dump(mysqli_character_set_name($mysqli));
     ?>

The above example will output:


     proxy::charsetName(array (
       0 => NULL,
     ))
     proxy::charsetName returns 'latin1'
     string(6) "latin1"

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_character_set_name'


File: manual.info,  Node: apis-php-mysqlnduhconnection.close,  Next: apis-php-mysqlnduhconnection.connect,  Prev: apis-php-mysqlnduhconnection.charsetname,  Up: apis-php-class.mysqlnduhconnection

22.9.4.18 `MysqlndUhConnection::close'
......................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::close'

     Closes a previously opened database connection

*Description*

public boolMysqlndUhConnection::close

mysqlnd_connectionconnection

intclose_type

Closes a previously opened database connection.

*Note*:

Failing to call the parent implementation may cause memory leaks or
crash PHP. This is not considered a bug. Please, keep in mind that the
`mysqlnd' library functions have never been designed to be exposed to
the user space.

*Parameters*

  1. connection

     The connection to be closed. Do not modify!

  2. close_type

     Why the connection is to be closed. The value of close_type is one
     of

     MYSQLND_UH_MYSQLND_CLOSE_EXPLICIT

     ,

     MYSQLND_UH_MYSQLND_CLOSE_IMPLICIT

     ,

     MYSQLND_UH_MYSQLND_CLOSE_DISCONNECTED

     or

     MYSQLND_UH_MYSQLND_CLOSE_LAST

     . The latter should never be seen, unless the default behaviour of
     the `mysqlnd' library has been changed by a plugin.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     function close_type_to_string($close_type) {
      $mapping = array(
       MYSQLND_UH_MYSQLND_CLOSE_DISCONNECTED => "MYSQLND_UH_MYSQLND_CLOSE_DISCONNECTED",
       MYSQLND_UH_MYSQLND_CLOSE_EXPLICIT => "MYSQLND_UH_MYSQLND_CLOSE_EXPLICIT",
       MYSQLND_UH_MYSQLND_CLOSE_IMPLICIT => "MYSQLND_UH_MYSQLND_CLOSE_IMPLICIT",
       MYSQLND_UH_MYSQLND_CLOSE_LAST => "MYSQLND_UH_MYSQLND_CLOSE_IMPLICIT"
      );
      return (isset($mapping[$close_type])) ? $mapping[$close_type] : 'unknown';
     }

     class proxy extends MysqlndUhConnection {
       public function close($res, $close_type) {
        printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
        printf("close_type = %s\n", close_type_to_string($close_type));
        /* WARNING: you must call the parent */
        $ret = parent::close($res, $close_type);
        printf("%s returns %s\n", __METHOD__, var_export($ret, true));
        return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->close();
     ?>

The above example will output:


     proxy::close(array (
       0 => NULL,
       1 => 0,
     ))
     close_type = MYSQLND_UH_MYSQLND_CLOSE_EXPLICIT
     proxy::close returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_close'

`mysql_close'


File: manual.info,  Node: apis-php-mysqlnduhconnection.connect,  Next: apis-php-mysqlnduhconnection.construct,  Prev: apis-php-mysqlnduhconnection.close,  Up: apis-php-class.mysqlnduhconnection

22.9.4.19 `MysqlndUhConnection::connect'
........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::connect'

     Open a new connection to the MySQL server

*Description*

public boolMysqlndUhConnection::connect

mysqlnd_connectionconnection

stringhost

stringuse"

stringpassword

stringdatabase

intport

stringsocket

intmysql_flags

Open a new connection to the MySQL server.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

  2. host

     Can be either a host name or an IP address. Passing the NULL value
     or the string "localhost" to this parameter, the local host is
     assumed. When possible, pipes will be used instead of the TCP/IP
     protocol.

  3. user

     The MySQL user name.

  4. password

     If not provided or

     NULL

     , the MySQL server will attempt to authenticate the user against
     those user records which have no password only.  This allows one
     username to be used with different permissions (depending on if a
     password as provided or not).

  5. database

     If provided will specify the default database to be used when
     performing queries.

  6. port

     Specifies the port number to attempt to connect to the MySQL
     server.

  7. socket

     Specifies the socket or named pipe that should be used. If

     NULL

     , mysqlnd will default to `/tmp/mysql.sock'.

  8. mysql_flags

     Connection options.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function connect($res, $host, $user, $passwd, $db, $port, $socket, $mysql_flags) {
        printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
        $ret = parent::connect($res, $host, $user, $passwd, $db, $port, $socket, $mysql_flags);
        printf("%s returns %s\n", __METHOD__, var_export($ret, true));
        return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     ?>

The above example will output:


     proxy::connect(array (
       0 => NULL,
       1 => 'localhost',
       2 => 'root',
       3 => '',
       4 => 'test',
       5 => 3306,
       6 => NULL,
       7 => 131072,
     ))
     proxy::connect returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_connect'

`mysql_connect'


File: manual.info,  Node: apis-php-mysqlnduhconnection.construct,  Next: apis-php-mysqlnduhconnection.endpsession,  Prev: apis-php-mysqlnduhconnection.connect,  Up: apis-php-class.mysqlnduhconnection

22.9.4.20 `MysqlndUhConnection::__construct'
............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::__construct'

     The __construct purpose

*Description*

public MysqlndUhConnection::__construct

*Warning*:

This function is currently not documented; only its argument list is
available.

*Parameters*

This function has no parameters.

*Return Values*


File: manual.info,  Node: apis-php-mysqlnduhconnection.endpsession,  Next: apis-php-mysqlnduhconnection.escapestring,  Prev: apis-php-mysqlnduhconnection.construct,  Up: apis-php-class.mysqlnduhconnection

22.9.4.21 `MysqlndUhConnection::endPSession'
............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::endPSession'

     End a persistent connection

*Description*

public boolMysqlndUhConnection::endPSession

mysqlnd_connectionconnection

End a persistent connection

*Warning*:

This function is currently not documented; only its argument list is
available.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function endPSession($conn) {
        printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
        $ret = parent::endPSession($conn);
        printf("%s returns %s\n", __METHOD__, var_export($ret, true));
        return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("p:localhost", "root", "", "test");
     $mysqli->close();
     ?>

The above example will output:


     proxy::endPSession(array (
       0 => NULL,
     ))
     proxy::endPSession returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.


File: manual.info,  Node: apis-php-mysqlnduhconnection.escapestring,  Next: apis-php-mysqlnduhconnection.getaffectedrows,  Prev: apis-php-mysqlnduhconnection.endpsession,  Up: apis-php-class.mysqlnduhconnection

22.9.4.22 `MysqlndUhConnection::escapeString'
.............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::escapeString'

     Escapes special characters in a string for use in an SQL
     statement, taking into account the current charset of the
     connection

*Description*

public stringMysqlndUhConnection::escapeString

mysqlnd_connectionconnection

stringescape_string

Escapes special characters in a string for use in an SQL statement,
taking into account the current charset of the connection.

*Parameters*

  1. MYSQLND_UH_RES_MYSQLND_NAME

     Mysqlnd connection handle. Do not modify!

  2. escape_string

     The string to be escaped.

*Return Values*

The escaped string.

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function escapeString($res, $string) {
        printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
        $ret = parent::escapeString($res, $string);
        printf("%s returns %s\n", __METHOD__, var_export($ret, true));
        return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->set_charset("latin1");
     $mysqli->real_escape_string("test0'test");
     ?>

The above example will output:


     proxy::escapeString(array (
       0 => NULL,
       1 => 'test0\'test',
     ))
     proxy::escapeString returns 'test0\\\'test'

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_real_escape_string'

`mysql_real_escape_string'


File: manual.info,  Node: apis-php-mysqlnduhconnection.getaffectedrows,  Next: apis-php-mysqlnduhconnection.geterrornumber,  Prev: apis-php-mysqlnduhconnection.escapestring,  Up: apis-php-class.mysqlnduhconnection

22.9.4.23 `MysqlndUhConnection::getAffectedRows'
................................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::getAffectedRows'

     Gets the number of affected rows in a previous MySQL operation

*Description*

public intMysqlndUhConnection::getAffectedRows

mysqlnd_connectionconnection

Gets the number of affected rows in a previous MySQL operation.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Number of affected rows.

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function getAffectedRows($res) {
        printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
        $ret = parent::getAffectedRows($res);
        printf("%s returns %s\n", __METHOD__, var_export($ret, true));
        return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->query("DROP TABLE IF EXISTS test");
     $mysqli->query("CREATE TABLE test(id INT)");
     $mysqli->query("INSERT INTO test(id) VALUES (1)");
     var_dump($mysqli->affected_rows);
     ?>

The above example will output:


     proxy::getAffectedRows(array (
       0 => NULL,
     ))
     proxy::getAffectedRows returns 1
     int(1)

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_affected_rows'

`mysql_affected_rows'


File: manual.info,  Node: apis-php-mysqlnduhconnection.geterrornumber,  Next: apis-php-mysqlnduhconnection.geterrorstring,  Prev: apis-php-mysqlnduhconnection.getaffectedrows,  Up: apis-php-class.mysqlnduhconnection

22.9.4.24 `MysqlndUhConnection::getErrorNumber'
...............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::getErrorNumber'

     Returns the error code for the most recent function call

*Description*

public intMysqlndUhConnection::getErrorNumber

mysqlnd_connectionconnection

Returns the error code for the most recent function call.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Error code for the most recent function call.

*Examples*

*Note `MysqlndUhConnection::getErrorNumber':
apis-php-mysqlnduhconnection.geterrornumber.  is not only executed
after the invocation of a user space API call which maps directly to it
but also called internally.


     <?php
     class proxy extends MysqlndUhConnection {
      public function getErrorNumber($res) {
        printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
        $ret = parent::getErrorNumber($res);
        printf("%s returns %s\n", __METHOD__, var_export($ret, true));
        return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     printf("connect...\n");
     $mysqli = new mysqli("localhost", "root", "", "test");
     printf("query...\n");
     $mysqli->query("PLEASE_LET_THIS_BE_INVALID_SQL");
     printf("errno...\n");
     var_dump($mysqli->errno);
     printf("close...\n");
     $mysqli->close();
     ?>

The above example will output:


     connect...
     proxy::getErrorNumber(array (
       0 => NULL,
     ))
     proxy::getErrorNumber returns 0
     query...
     errno...
     proxy::getErrorNumber(array (
       0 => NULL,
     ))
     proxy::getErrorNumber returns 1064
     int(1064)
     close...

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

*Note `MysqlndUhConnection::getErrorString':
apis-php-mysqlnduhconnection.geterrorstring.

`mysqli_errno'

`mysql_errno'


File: manual.info,  Node: apis-php-mysqlnduhconnection.geterrorstring,  Next: apis-php-mysqlnduhconnection.getfieldcount,  Prev: apis-php-mysqlnduhconnection.geterrornumber,  Up: apis-php-class.mysqlnduhconnection

22.9.4.25 `MysqlndUhConnection::getErrorString'
...............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::getErrorString'

     Returns a string description of the last error

*Description*

public stringMysqlndUhConnection::getErrorString

mysqlnd_connectionconnection

Returns a string description of the last error.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Error string for the most recent function call.

*Examples*

*Note `MysqlndUhConnection::getErrorString':
apis-php-mysqlnduhconnection.geterrorstring.  is not only executed
after the invocation of a user space API call which maps directly to it
but also called internally.


     <?php
     class proxy extends MysqlndUhConnection {
      public function getErrorString($res) {
        printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
        $ret = parent::getErrorString($res);
        printf("%s returns %s\n", __METHOD__, var_export($ret, true));
        return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     printf("connect...\n");
     $mysqli = new mysqli("localhost", "root", "", "test");
     printf("query...\n");
     $mysqli->query("WILL_I_EVER_LEARN_SQL?");
     printf("errno...\n");
     var_dump($mysqli->error);
     printf("close...\n");
     $mysqli->close();
     ?>

The above example will output:


     connect...
     proxy::getErrorString(array (
       0 => NULL,
     ))
     proxy::getErrorString returns ''
     query...
     errno...
     proxy::getErrorString(array (
       0 => NULL,
     ))
     proxy::getErrorString returns 'You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near \'WILL_I_EVER_LEARN_SQL?\' at line 1'
     string(168) "You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'WILL_I_EVER_LEARN_SQL?' at line 1"
     close...

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

*Note `MysqlndUhConnection::getErrorNumber':
apis-php-mysqlnduhconnection.geterrornumber.

`mysqli_error'

`mysql_error'


File: manual.info,  Node: apis-php-mysqlnduhconnection.getfieldcount,  Next: apis-php-mysqlnduhconnection.gethostinformation,  Prev: apis-php-mysqlnduhconnection.geterrorstring,  Up: apis-php-class.mysqlnduhconnection

22.9.4.26 `MysqlndUhConnection::getFieldCount'
..............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::getFieldCount'

     Returns the number of columns for the most recent query

*Description*

public intMysqlndUhConnection::getFieldCount

mysqlnd_connectionconnection

Returns the number of columns for the most recent query.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Number of columns.

*Examples*

*Note `MysqlndUhConnection::getFieldCount':
apis-php-mysqlnduhconnection.getfieldcount.  is not only executed after
the invocation of a user space API call which maps directly to it but
also called internally.


     <?php
     class proxy extends MysqlndUhConnection {
      public function getFieldCount($res) {
        printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
        $ret = parent::getFieldCount($res);
        printf("%s returns %s\n", __METHOD__, var_export($ret, true));
        return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->query("WILL_I_EVER_LEARN_SQL?");
     var_dump($mysqli->field_count);
     $mysqli->query("SELECT 1, 2, 3 FROM DUAL");
     var_dump($mysqli->field_count);
     ?>

The above example will output:


     proxy::getFieldCount(array (
       0 => NULL,
     ))
     proxy::getFieldCount returns 0
     int(0)
     proxy::getFieldCount(array (
       0 => NULL,
     ))
     proxy::getFieldCount returns 3
     proxy::getFieldCount(array (
       0 => NULL,
     ))
     proxy::getFieldCount returns 3
     int(3)

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_field_count'


File: manual.info,  Node: apis-php-mysqlnduhconnection.gethostinformation,  Next: apis-php-mysqlnduhconnection.getlastinsertid,  Prev: apis-php-mysqlnduhconnection.getfieldcount,  Up: apis-php-class.mysqlnduhconnection

22.9.4.27 `MysqlndUhConnection::getHostInformation'
...................................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::getHostInformation'

     Returns a string representing the type of connection used

*Description*

public stringMysqlndUhConnection::getHostInformation

mysqlnd_connectionconnection

Returns a string representing the type of connection used.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Connection description.

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function getHostInformation($res) {
        printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
        $ret = parent::getHostInformation($res);
        printf("%s returns %s\n", __METHOD__, var_export($ret, true));
        return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     var_dump($mysqli->host_info);
     ?>

The above example will output:


     proxy::getHostInformation(array (
       0 => NULL,
     ))
     proxy::getHostInformation returns 'Localhost via UNIX socket'
     string(25) "Localhost via UNIX socket"

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_get_host_info'

`mysql_get_host_info'


File: manual.info,  Node: apis-php-mysqlnduhconnection.getlastinsertid,  Next: apis-php-mysqlnduhconnection.getlastmessage,  Prev: apis-php-mysqlnduhconnection.gethostinformation,  Up: apis-php-class.mysqlnduhconnection

22.9.4.28 `MysqlndUhConnection::getLastInsertId'
................................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::getLastInsertId'

     Returns the auto generated id used in the last query.

*Description*

public intMysqlndUhConnection::getLastInsertId

mysqlnd_connectionconnection

Returns the auto generated id used in the last query.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Last insert id.

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function getLastInsertId($res) {
        printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
        $ret = parent::getLastInsertId($res);
        printf("%s returns %s\n", __METHOD__, var_export($ret, true));
        return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->query("DROP TABLE IF EXISTS test");
     $mysqli->query("CREATE TABLE test(id INT AUTO_INCREMENT PRIMARY KEY, col VARCHAR(255))");
     $mysqli->query("INSERT INTO test(col) VALUES ('a')");
     var_dump($mysqli->insert_id);
     ?>

The above example will output:


     proxy::getLastInsertId(array (
       0 => NULL,
     ))
     proxy::getLastInsertId returns 1
     int(1)

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_insert_id'

`mysql_insert_id'


File: manual.info,  Node: apis-php-mysqlnduhconnection.getlastmessage,  Next: apis-php-mysqlnduhconnection.getprotocolinformation,  Prev: apis-php-mysqlnduhconnection.getlastinsertid,  Up: apis-php-class.mysqlnduhconnection

22.9.4.29 `MysqlndUhConnection::getLastMessage'
...............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::getLastMessage'

     Retrieves information about the most recently executed query

*Description*

public voidMysqlndUhConnection::getLastMessage

mysqlnd_connectionconnection

Retrieves information about the most recently executed query.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Last message. Trying to return a string longer than 511 bytes will
cause an error of the type `E_WARNING' and result in the string being
truncated.

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function getLastMessage($res) {
        printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
        $ret = parent::getLastMessage($res);
        printf("%s returns %s\n", __METHOD__, var_export($ret, true));
        return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     var_dump($mysqli->info);
     $mysqli->query("DROP TABLE IF EXISTS test");
     var_dump($mysqli->info);
     ?>

The above example will output:


     proxy::getLastMessage(array (
       0 => NULL,
     ))
     proxy::getLastMessage returns ''
     string(0) ""
     proxy::getLastMessage(array (
       0 => NULL,
     ))
     proxy::getLastMessage returns ''
     string(0) ""

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_info'

`mysql_info'


File: manual.info,  Node: apis-php-mysqlnduhconnection.getprotocolinformation,  Next: apis-php-mysqlnduhconnection.getserverinformation,  Prev: apis-php-mysqlnduhconnection.getlastmessage,  Up: apis-php-class.mysqlnduhconnection

22.9.4.30 `MysqlndUhConnection::getProtocolInformation'
.......................................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::getProtocolInformation'

     Returns the version of the MySQL protocol used

*Description*

public stringMysqlndUhConnection::getProtocolInformation

mysqlnd_connectionconnection

Returns the version of the MySQL protocol used.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

The protocol version.

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function getProtocolInformation($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::getProtocolInformation($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     var_dump($mysqli->protocol_version);
     ?>

The above example will output:


     proxy::getProtocolInformation(array (
       0 => NULL,
     ))
     proxy::getProtocolInformation returns 10
     int(10)

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_get_proto_info'

`mysql_get_proto_info'


File: manual.info,  Node: apis-php-mysqlnduhconnection.getserverinformation,  Next: apis-php-mysqlnduhconnection.getserverstatistics,  Prev: apis-php-mysqlnduhconnection.getprotocolinformation,  Up: apis-php-class.mysqlnduhconnection

22.9.4.31 `MysqlndUhConnection::getServerInformation'
.....................................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::getServerInformation'

     Returns the version of the MySQL server

*Description*

public stringMysqlndUhConnection::getServerInformation

mysqlnd_connectionconnection

Returns the version of the MySQL server.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

The server version.

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function getServerInformation($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::getServerInformation($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     var_dump($mysqli->server_info);
     ?>

The above example will output:


     proxy::getServerInformation(array (
       0 => NULL,
     ))
     proxy::getServerInformation returns '5.1.45-debug-log'
     string(16) "5.1.45-debug-log"

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_get_server_info'

`mysql_get_server_info'


File: manual.info,  Node: apis-php-mysqlnduhconnection.getserverstatistics,  Next: apis-php-mysqlnduhconnection.getserverversion,  Prev: apis-php-mysqlnduhconnection.getserverinformation,  Up: apis-php-class.mysqlnduhconnection

22.9.4.32 `MysqlndUhConnection::getServerStatistics'
....................................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::getServerStatistics'

     Gets the current system status

*Description*

public stringMysqlndUhConnection::getServerStatistics

mysqlnd_connectionconnection

Gets the current system status.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

The system status message.

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function getServerStatistics($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::getServerStatistics($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     var_dump(mysqli_stat($mysqli));
     ?>

The above example will output:


     proxy::getServerStatistics(array (
       0 => NULL,
     ))
     proxy::getServerStatistics returns 'Uptime: 2059995  Threads: 1  Questions: 126157  Slow queries: 0  Opens: 6377  Flush tables: 1  Open tables: 18  Queries per second avg: 0.61'
     string(140) "Uptime: 2059995  Threads: 1  Questions: 126157  Slow queries: 0  Opens: 6377  Flush tables: 1  Open tables: 18  Queries per second avg: 0.61"

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_stat'

`mysql_stat'


File: manual.info,  Node: apis-php-mysqlnduhconnection.getserverversion,  Next: apis-php-mysqlnduhconnection.getsqlstate,  Prev: apis-php-mysqlnduhconnection.getserverstatistics,  Up: apis-php-class.mysqlnduhconnection

22.9.4.33 `MysqlndUhConnection::getServerVersion'
.................................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::getServerVersion'

     Returns the version of the MySQL server as an integer

*Description*

public intMysqlndUhConnection::getServerVersion

mysqlnd_connectionconnection

Returns the version of the MySQL server as an integer.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

The MySQL version.

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function getServerVersion($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::getServerVersion($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     var_dump($mysqli->server_version);
     ?>

The above example will output:


     proxy::getServerVersion(array (
       0 => NULL,
     ))
     proxy::getServerVersion returns 50145
     int(50145)

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_get_server_version'

`mysql_get_server_version' (http://www.php.net/mysql_get_server_version)


File: manual.info,  Node: apis-php-mysqlnduhconnection.getsqlstate,  Next: apis-php-mysqlnduhconnection.getstatistics,  Prev: apis-php-mysqlnduhconnection.getserverversion,  Up: apis-php-class.mysqlnduhconnection

22.9.4.34 `MysqlndUhConnection::getSqlstate'
............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::getSqlstate'

     Returns the SQLSTATE error from previous MySQL operation

*Description*

public stringMysqlndUhConnection::getSqlstate

mysqlnd_connectionconnection

Returns the SQLSTATE error from previous MySQL operation.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

The SQLSTATE code.

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function getSqlstate($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::getSqlstate($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     var_dump($mysqli->sqlstate);
     $mysqli->query("AN_INVALID_REQUEST_TO_PROVOKE_AN_ERROR");
     var_dump($mysqli->sqlstate);
     ?>

The above example will output:


     proxy::getSqlstate(array (
       0 => NULL,
     ))
     proxy::getSqlstate returns '00000'
     string(5) "00000"
     proxy::getSqlstate(array (
       0 => NULL,
     ))
     proxy::getSqlstate returns '42000'
     string(5) "42000"

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_sql_state' (http://www.php.net/mysqli_sql_state)


File: manual.info,  Node: apis-php-mysqlnduhconnection.getstatistics,  Next: apis-php-mysqlnduhconnection.getthreadid,  Prev: apis-php-mysqlnduhconnection.getsqlstate,  Up: apis-php-class.mysqlnduhconnection

22.9.4.35 `MysqlndUhConnection::getStatistics'
..............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::getStatistics'

     Returns statistics about the client connection.

*Description*

public arrayMysqlndUhConnection::getStatistics

mysqlnd_connectionconnection

Returns statistics about the client connection.

*Warning*:

This function is currently not documented; only its argument list is
available.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Connection statistics collected by mysqlnd.

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function getStatistics($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::getStatistics($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     var_dump($mysqli->get_connection_stats());
     ?>

The above example will output:


     proxy::getStatistics(array (
       0 => NULL,
     ))
     proxy::getStatistics returns array (
       'bytes_sent' => '73',
       'bytes_received' => '77',
       'packets_sent' => '2',
       'packets_received' => '2',
       'protocol_overhead_in' => '8',
       'protocol_overhead_out' => '8',
       'bytes_received_ok_packet' => '0',
       'bytes_received_eof_packet' => '0',
       'bytes_received_rset_header_packet' => '0',
       'bytes_received_rset_field_meta_packet' => '0',
       'bytes_received_rset_row_packet' => '0',
       'bytes_received_prepare_response_packet' => '0',
       'bytes_received_change_user_packet' => '0',
       'packets_sent_command' => '0',
       'packets_received_ok' => '0',
       'packets_received_eof' => '0',
       'packets_received_rset_header' => '0',
       'packets_received_rset_field_meta' => '0',
       'packets_received_rset_row' => '0',
       'packets_received_prepare_response' => '0',
       'packets_received_change_user' => '0',
       'result_set_queries' => '0',
       'non_result_set_queries' => '0',
       'no_index_used' => '0',
       'bad_index_used' => '0',
       'slow_queries' => '0',
       'buffered_sets' => '0',
       'unbuffered_sets' => '0',
       'ps_buffered_sets' => '0',
       'ps_unbuffered_sets' => '0',
       'flushed_normal_sets' => '0',
       'flushed_ps_sets' => '0',
       'ps_prepared_never_executed' => '0',
       'ps_prepared_once_executed' => '0',
       'rows_fetched_from_server_normal' => '0',
       'rows_fetched_from_server_ps' => '0',
       'rows_buffered_from_client_normal' => '0',
       'rows_buffered_from_client_ps' => '0',
       'rows_fetched_from_client_normal_buffered' => '0',
       'rows_fetched_from_client_normal_unbuffered' => '0',
       'rows_fetched_from_client_ps_buffered' => '0',
       'rows_fetched_from_client_ps_unbuffered' => '0',
       'rows_fetched_from_client_ps_cursor' => '0',
       'rows_affected_normal' => '0',
       'rows_affected_ps' => '0',
       'rows_skipped_normal' => '0',
       'rows_skipped_ps' => '0',
       'copy_on_write_saved' => '0',
       'copy_on_write_performed' => '0',
       'command_buffer_too_small' => '0',
       'connect_success' => '1',
       'connect_failure' => '0',
       'connection_reused' => '0',
       'reconnect' => '0',
       'pconnect_success' => '0',
       'active_connections' => '1',
       'active_persistent_connections' => '0',
       'explicit_close' => '0',
       'implicit_close' => '0',
       'disconnect_close' => '0',
       'in_middle_of_command_close' => '0',
       'explicit_free_result' => '0',
       'implicit_free_result' => '0',
       'explicit_stmt_close' => '0',
       'implicit_stmt_close' => '0',
       'mem_emalloc_count' => '0',
       'mem_emalloc_amount' => '0',
       'mem_ecalloc_count' => '0',
       'mem_ecalloc_amount' => '0',
       'mem_erealloc_count' => '0',
       'mem_erealloc_amount' => '0',
       'mem_efree_count' => '0',
       'mem_efree_amount' => '0',
       'mem_malloc_count' => '0',
       'mem_malloc_amount' => '0',
       'mem_calloc_count' => '0',
       'mem_calloc_amount' => '0',
       'mem_realloc_count' => '0',
       'mem_realloc_amount' => '0',
       'mem_free_count' => '0',
       'mem_free_amount' => '0',
       'mem_estrndup_count' => '0',
       'mem_strndup_count' => '0',
       'mem_estndup_count' => '0',
       'mem_strdup_count' => '0',
       'proto_text_fetched_null' => '0',
       'proto_text_fetched_bit' => '0',
       'proto_text_fetched_tinyint' => '0',
       'proto_text_fetched_short' => '0',
       'proto_text_fetched_int24' => '0',
       'proto_text_fetched_int' => '0',
       'proto_text_fetched_bigint' => '0',
       'proto_text_fetched_decimal' => '0',
       'proto_text_fetched_float' => '0',
       'proto_text_fetched_double' => '0',
       'proto_text_fetched_date' => '0',
       'proto_text_fetched_year' => '0',
       'proto_text_fetched_time' => '0',
       'proto_text_fetched_datetime' => '0',
       'proto_text_fetched_timestamp' => '0',
       'proto_text_fetched_string' => '0',
       'proto_text_fetched_blob' => '0',
       'proto_text_fetched_enum' => '0',
       'proto_text_fetched_set' => '0',
       'proto_text_fetched_geometry' => '0',
       'proto_text_fetched_other' => '0',
       'proto_binary_fetched_null' => '0',
       'proto_binary_fetched_bit' => '0',
       'proto_binary_fetched_tinyint' => '0',
       'proto_binary_fetched_short' => '0',
       'proto_binary_fetched_int24' => '0',
       'proto_binary_fetched_int' => '0',
       'proto_binary_fetched_bigint' => '0',
       'proto_binary_fetched_decimal' => '0',
       'proto_binary_fetched_float' => '0',
       'proto_binary_fetched_double' => '0',
       'proto_binary_fetched_date' => '0',
       'proto_binary_fetched_year' => '0',
       'proto_binary_fetched_time' => '0',
       'proto_binary_fetched_datetime' => '0',
       'proto_binary_fetched_timestamp' => '0',
       'proto_binary_fetched_string' => '0',
       'proto_binary_fetched_blob' => '0',
       'proto_binary_fetched_enum' => '0',
       'proto_binary_fetched_set' => '0',
       'proto_binary_fetched_geometry' => '0',
       'proto_binary_fetched_other' => '0',
       'init_command_executed_count' => '0',
       'init_command_failed_count' => '0',
       'com_quit' => '0',
       'com_init_db' => '0',
       'com_query' => '0',
       'com_field_list' => '0',
       'com_create_db' => '0',
       'com_drop_db' => '0',
       'com_refresh' => '0',
       'com_shutdown' => '0',
       'com_statistics' => '0',
       'com_process_info' => '0',
       'com_connect' => '0',
       'com_process_kill' => '0',
       'com_debug' => '0',
       'com_ping' => '0',
       'com_time' => '0',
       'com_delayed_insert' => '0',
       'com_change_user' => '0',
       'com_binlog_dump' => '0',
       'com_table_dump' => '0',
       'com_connect_out' => '0',
       'com_register_slave' => '0',
       'com_stmt_prepare' => '0',
       'com_stmt_execute' => '0',
       'com_stmt_send_long_data' => '0',
       'com_stmt_close' => '0',
       'com_stmt_reset' => '0',
       'com_stmt_set_option' => '0',
       'com_stmt_fetch' => '0',
       'com_deamon' => '0',
       'bytes_received_real_data_normal' => '0',
       'bytes_received_real_data_ps' => '0',
     )
     array(160) {
       ["bytes_sent"]=>
       string(2) "73"
       ["bytes_received"]=>
       string(2) "77"
       ["packets_sent"]=>
       string(1) "2"
       ["packets_received"]=>
       string(1) "2"
       ["protocol_overhead_in"]=>
       string(1) "8"
       ["protocol_overhead_out"]=>
       string(1) "8"
       ["bytes_received_ok_packet"]=>
       string(1) "0"
       ["bytes_received_eof_packet"]=>
       string(1) "0"
       ["bytes_received_rset_header_packet"]=>
       string(1) "0"
       ["bytes_received_rset_field_meta_packet"]=>
       string(1) "0"
       ["bytes_received_rset_row_packet"]=>
       string(1) "0"
       ["bytes_received_prepare_response_packet"]=>
       string(1) "0"
       ["bytes_received_change_user_packet"]=>
       string(1) "0"
       ["packets_sent_command"]=>
       string(1) "0"
       ["packets_received_ok"]=>
       string(1) "0"
       ["packets_received_eof"]=>
       string(1) "0"
       ["packets_received_rset_header"]=>
       string(1) "0"
       ["packets_received_rset_field_meta"]=>
       string(1) "0"
       ["packets_received_rset_row"]=>
       string(1) "0"
       ["packets_received_prepare_response"]=>
       string(1) "0"
       ["packets_received_change_user"]=>
       string(1) "0"
       ["result_set_queries"]=>
       string(1) "0"
       ["non_result_set_queries"]=>
       string(1) "0"
       ["no_index_used"]=>
       string(1) "0"
       ["bad_index_used"]=>
       string(1) "0"
       ["slow_queries"]=>
       string(1) "0"
       ["buffered_sets"]=>
       string(1) "0"
       ["unbuffered_sets"]=>
       string(1) "0"
       ["ps_buffered_sets"]=>
       string(1) "0"
       ["ps_unbuffered_sets"]=>
       string(1) "0"
       ["flushed_normal_sets"]=>
       string(1) "0"
       ["flushed_ps_sets"]=>
       string(1) "0"
       ["ps_prepared_never_executed"]=>
       string(1) "0"
       ["ps_prepared_once_executed"]=>
       string(1) "0"
       ["rows_fetched_from_server_normal"]=>
       string(1) "0"
       ["rows_fetched_from_server_ps"]=>
       string(1) "0"
       ["rows_buffered_from_client_normal"]=>
       string(1) "0"
       ["rows_buffered_from_client_ps"]=>
       string(1) "0"
       ["rows_fetched_from_client_normal_buffered"]=>
       string(1) "0"
       ["rows_fetched_from_client_normal_unbuffered"]=>
       string(1) "0"
       ["rows_fetched_from_client_ps_buffered"]=>
       string(1) "0"
       ["rows_fetched_from_client_ps_unbuffered"]=>
       string(1) "0"
       ["rows_fetched_from_client_ps_cursor"]=>
       string(1) "0"
       ["rows_affected_normal"]=>
       string(1) "0"
       ["rows_affected_ps"]=>
       string(1) "0"
       ["rows_skipped_normal"]=>
       string(1) "0"
       ["rows_skipped_ps"]=>
       string(1) "0"
       ["copy_on_write_saved"]=>
       string(1) "0"
       ["copy_on_write_performed"]=>
       string(1) "0"
       ["command_buffer_too_small"]=>
       string(1) "0"
       ["connect_success"]=>
       string(1) "1"
       ["connect_failure"]=>
       string(1) "0"
       ["connection_reused"]=>
       string(1) "0"
       ["reconnect"]=>
       string(1) "0"
       ["pconnect_success"]=>
       string(1) "0"
       ["active_connections"]=>
       string(1) "1"
       ["active_persistent_connections"]=>
       string(1) "0"
       ["explicit_close"]=>
       string(1) "0"
       ["implicit_close"]=>
       string(1) "0"
       ["disconnect_close"]=>
       string(1) "0"
       ["in_middle_of_command_close"]=>
       string(1) "0"
       ["explicit_free_result"]=>
       string(1) "0"
       ["implicit_free_result"]=>
       string(1) "0"
       ["explicit_stmt_close"]=>
       string(1) "0"
       ["implicit_stmt_close"]=>
       string(1) "0"
       ["mem_emalloc_count"]=>
       string(1) "0"
       ["mem_emalloc_amount"]=>
       string(1) "0"
       ["mem_ecalloc_count"]=>
       string(1) "0"
       ["mem_ecalloc_amount"]=>
       string(1) "0"
       ["mem_erealloc_count"]=>
       string(1) "0"
       ["mem_erealloc_amount"]=>
       string(1) "0"
       ["mem_efree_count"]=>
       string(1) "0"
       ["mem_efree_amount"]=>
       string(1) "0"
       ["mem_malloc_count"]=>
       string(1) "0"
       ["mem_malloc_amount"]=>
       string(1) "0"
       ["mem_calloc_count"]=>
       string(1) "0"
       ["mem_calloc_amount"]=>
       string(1) "0"
       ["mem_realloc_count"]=>
       string(1) "0"
       ["mem_realloc_amount"]=>
       string(1) "0"
       ["mem_free_count"]=>
       string(1) "0"
       ["mem_free_amount"]=>
       string(1) "0"
       ["mem_estrndup_count"]=>
       string(1) "0"
       ["mem_strndup_count"]=>
       string(1) "0"
       ["mem_estndup_count"]=>
       string(1) "0"
       ["mem_strdup_count"]=>
       string(1) "0"
       ["proto_text_fetched_null"]=>
       string(1) "0"
       ["proto_text_fetched_bit"]=>
       string(1) "0"
       ["proto_text_fetched_tinyint"]=>
       string(1) "0"
       ["proto_text_fetched_short"]=>
       string(1) "0"
       ["proto_text_fetched_int24"]=>
       string(1) "0"
       ["proto_text_fetched_int"]=>
       string(1) "0"
       ["proto_text_fetched_bigint"]=>
       string(1) "0"
       ["proto_text_fetched_decimal"]=>
       string(1) "0"
       ["proto_text_fetched_float"]=>
       string(1) "0"
       ["proto_text_fetched_double"]=>
       string(1) "0"
       ["proto_text_fetched_date"]=>
       string(1) "0"
       ["proto_text_fetched_year"]=>
       string(1) "0"
       ["proto_text_fetched_time"]=>
       string(1) "0"
       ["proto_text_fetched_datetime"]=>
       string(1) "0"
       ["proto_text_fetched_timestamp"]=>
       string(1) "0"
       ["proto_text_fetched_string"]=>
       string(1) "0"
       ["proto_text_fetched_blob"]=>
       string(1) "0"
       ["proto_text_fetched_enum"]=>
       string(1) "0"
       ["proto_text_fetched_set"]=>
       string(1) "0"
       ["proto_text_fetched_geometry"]=>
       string(1) "0"
       ["proto_text_fetched_other"]=>
       string(1) "0"
       ["proto_binary_fetched_null"]=>
       string(1) "0"
       ["proto_binary_fetched_bit"]=>
       string(1) "0"
       ["proto_binary_fetched_tinyint"]=>
       string(1) "0"
       ["proto_binary_fetched_short"]=>
       string(1) "0"
       ["proto_binary_fetched_int24"]=>
       string(1) "0"
       ["proto_binary_fetched_int"]=>
       string(1) "0"
       ["proto_binary_fetched_bigint"]=>
       string(1) "0"
       ["proto_binary_fetched_decimal"]=>
       string(1) "0"
       ["proto_binary_fetched_float"]=>
       string(1) "0"
       ["proto_binary_fetched_double"]=>
       string(1) "0"
       ["proto_binary_fetched_date"]=>
       string(1) "0"
       ["proto_binary_fetched_year"]=>
       string(1) "0"
       ["proto_binary_fetched_time"]=>
       string(1) "0"
       ["proto_binary_fetched_datetime"]=>
       string(1) "0"
       ["proto_binary_fetched_timestamp"]=>
       string(1) "0"
       ["proto_binary_fetched_string"]=>
       string(1) "0"
       ["proto_binary_fetched_blob"]=>
       string(1) "0"
       ["proto_binary_fetched_enum"]=>
       string(1) "0"
       ["proto_binary_fetched_set"]=>
       string(1) "0"
       ["proto_binary_fetched_geometry"]=>
       string(1) "0"
       ["proto_binary_fetched_other"]=>
       string(1) "0"
       ["init_command_executed_count"]=>
       string(1) "0"
       ["init_command_failed_count"]=>
       string(1) "0"
       ["com_quit"]=>
       string(1) "0"
       ["com_init_db"]=>
       string(1) "0"
       ["com_query"]=>
       string(1) "0"
       ["com_field_list"]=>
       string(1) "0"
       ["com_create_db"]=>
       string(1) "0"
       ["com_drop_db"]=>
       string(1) "0"
       ["com_refresh"]=>
       string(1) "0"
       ["com_shutdown"]=>
       string(1) "0"
       ["com_statistics"]=>
       string(1) "0"
       ["com_process_info"]=>
       string(1) "0"
       ["com_connect"]=>
       string(1) "0"
       ["com_process_kill"]=>
       string(1) "0"
       ["com_debug"]=>
       string(1) "0"
       ["com_ping"]=>
       string(1) "0"
       ["com_time"]=>
       string(1) "0"
       ["com_delayed_insert"]=>
       string(1) "0"
       ["com_change_user"]=>
       string(1) "0"
       ["com_binlog_dump"]=>
       string(1) "0"
       ["com_table_dump"]=>
       string(1) "0"
       ["com_connect_out"]=>
       string(1) "0"
       ["com_register_slave"]=>
       string(1) "0"
       ["com_stmt_prepare"]=>
       string(1) "0"
       ["com_stmt_execute"]=>
       string(1) "0"
       ["com_stmt_send_long_data"]=>
       string(1) "0"
       ["com_stmt_close"]=>
       string(1) "0"
       ["com_stmt_reset"]=>
       string(1) "0"
       ["com_stmt_set_option"]=>
       string(1) "0"
       ["com_stmt_fetch"]=>
       string(1) "0"
       ["com_deamon"]=>
       string(1) "0"
       ["bytes_received_real_data_normal"]=>
       string(1) "0"
       ["bytes_received_real_data_ps"]=>
       string(1) "0"
     }

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_get_connection_stats'


File: manual.info,  Node: apis-php-mysqlnduhconnection.getthreadid,  Next: apis-php-mysqlnduhconnection.getwarningcount,  Prev: apis-php-mysqlnduhconnection.getstatistics,  Up: apis-php-class.mysqlnduhconnection

22.9.4.36 `MysqlndUhConnection::getThreadId'
............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::getThreadId'

     Returns the thread ID for the current connection

*Description*

public intMysqlndUhConnection::getThreadId

mysqlnd_connectionconnection

Returns the thread ID for the current connection.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Connection thread id.

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function getThreadId($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::getThreadId($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     var_dump($mysqli->thread_id);
     ?>

The above example will output:


     proxy::getThreadId(array (
       0 => NULL,
     ))
     proxy::getThreadId returns 27646
     int(27646)

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_thread_id'

`mysql_thread_id'


File: manual.info,  Node: apis-php-mysqlnduhconnection.getwarningcount,  Next: apis-php-mysqlnduhconnection.init,  Prev: apis-php-mysqlnduhconnection.getthreadid,  Up: apis-php-class.mysqlnduhconnection

22.9.4.37 `MysqlndUhConnection::getWarningCount'
................................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::getWarningCount'

     Returns the number of warnings from the last query for the given
     link

*Description*

public intMysqlndUhConnection::getWarningCount

mysqlnd_connectionconnection

Returns the number of warnings from the last query for the given link.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Number of warnings.

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function getWarningCount($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::getWarningCount($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     var_dump($mysqli->warning_count);
     ?>

The above example will output:


     proxy::getWarningCount(array (
       0 => NULL,
     ))
     proxy::getWarningCount returns 0
     int(0)

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_warning_count'


File: manual.info,  Node: apis-php-mysqlnduhconnection.init,  Next: apis-php-mysqlnduhconnection.killconnection,  Prev: apis-php-mysqlnduhconnection.getwarningcount,  Up: apis-php-class.mysqlnduhconnection

22.9.4.38 `MysqlndUhConnection::init'
.....................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::init'

     Initialize mysqlnd connection

*Description*

public boolMysqlndUhConnection::init

mysqlnd_connectionconnection

Initialize mysqlnd connection. This is an mysqlnd internal call to
initialize the connection object.

*Note*:

Failing to call the parent implementation may cause memory leaks or
crash PHP. This is not considered a bug. Please, keep in mind that the
`mysqlnd' library functions have never been designed to be exposed to
the user space.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function init($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::init($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     ?>

The above example will output:


     proxy::init(array (
       0 => NULL,
     ))
     proxy::init returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.


File: manual.info,  Node: apis-php-mysqlnduhconnection.killconnection,  Next: apis-php-mysqlnduhconnection.listfields,  Prev: apis-php-mysqlnduhconnection.init,  Up: apis-php-class.mysqlnduhconnection

22.9.4.39 `MysqlndUhConnection::killConnection'
...............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::killConnection'

     Asks the server to kill a MySQL thread

*Description*

public boolMysqlndUhConnection::killConnection

mysqlnd_connectionconnection

intpid

Asks the server to kill a MySQL thread.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

  2. pid

     Thread Id of the connection to be killed.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function killConnection($res, $pid) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::killConnection($res, $pid);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->kill($mysqli->thread_id);
     ?>

The above example will output:


     proxy::killConnection(array (
       0 => NULL,
       1 => 27650,
     ))
     proxy::killConnection returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_kill'


File: manual.info,  Node: apis-php-mysqlnduhconnection.listfields,  Next: apis-php-mysqlnduhconnection.listmethod,  Prev: apis-php-mysqlnduhconnection.killconnection,  Up: apis-php-class.mysqlnduhconnection

22.9.4.40 `MysqlndUhConnection::listFields'
...........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::listFields'

     List MySQL table fields

*Description*

public arrayMysqlndUhConnection::listFields

mysqlnd_connectionconnection

stringtable

stringachtung_wild

List MySQL table fields.

*Warning*:

This function is currently not documented; only its argument list is
available.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

  2. table

     The name of the table that's being queried.

  3. pattern

     Name pattern.

*Return Values*

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function listFields($res, $table, $pattern) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::listFields($res, $table, $pattern);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysql = mysql_connect("localhost", "root", "");
     mysql_select_db("test", $mysql);
     mysql_query("DROP TABLE IF EXISTS test_a", $mysql);
     mysql_query("CREATE TABLE test_a(id INT, col1 VARCHAR(255))", $mysql);
     $res = mysql_list_fields("test", "test_a", $mysql);
     printf("num_rows = %d\n", mysql_num_rows($res));
     while ($row = mysql_fetch_assoc($res))
      var_dump($row);
     ?>

The above example will output:


     proxy::listFields(array (
       0 => NULL,
       1 => 'test_a',
       2 => '',
     ))
     proxy::listFields returns NULL
     num_rows = 0

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysql_list_fields'


File: manual.info,  Node: apis-php-mysqlnduhconnection.listmethod,  Next: apis-php-mysqlnduhconnection.moreresults,  Prev: apis-php-mysqlnduhconnection.listfields,  Up: apis-php-class.mysqlnduhconnection

22.9.4.41 `MysqlndUhConnection::listMethod'
...........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::listMethod'

     Wrapper for assorted list commands

*Description*

public voidMysqlndUhConnection::listMethod

mysqlnd_connectionconnection

stringquery

stringachtung_wild

stringpar1

Wrapper for assorted list commands.

*Warning*:

This function is currently not documented; only its argument list is
available.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

  2. query

     SHOW command to be executed.

  3. achtung_wild

  4. par1

*Return Values*

*Return Values*

TODO

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function listMethod($res, $query, $pattern, $par1) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::listMethod($res, $query, $pattern, $par1);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysql = mysql_connect("localhost", "root", "");
     $res = mysql_list_dbs($mysql);
     printf("num_rows = %d\n", mysql_num_rows($res));
     while ($row = mysql_fetch_assoc($res))
      var_dump($row);
     ?>

The above example will output:


     proxy::listMethod(array (
       0 => NULL,
       1 => 'SHOW DATABASES',
       2 => '',
       3 => '',
     ))
     proxy::listMethod returns NULL
     num_rows = 6
     array(1) {
       ["Database"]=>
       string(18) "information_schema"
     }
     array(1) {
       ["Database"]=>
       string(5) "mysql"
     }
     array(1) {
       ["Database"]=>
       string(8) "oxid_new"
     }
     array(1) {
       ["Database"]=>
       string(7) "phptest"
     }
     array(1) {
       ["Database"]=>
       string(7) "pushphp"
     }
     array(1) {
       ["Database"]=>
       string(4) "test"
     }

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysql_list_dbs'


File: manual.info,  Node: apis-php-mysqlnduhconnection.moreresults,  Next: apis-php-mysqlnduhconnection.nextresult,  Prev: apis-php-mysqlnduhconnection.listmethod,  Up: apis-php-class.mysqlnduhconnection

22.9.4.42 `MysqlndUhConnection::moreResults'
............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::moreResults'

     Check if there are any more query results from a multi query

*Description*

public boolMysqlndUhConnection::moreResults

mysqlnd_connectionconnection

Check if there are any more query results from a multi query.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function moreResults($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::moreResults($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->multi_query("SELECT 1 AS _one; SELECT 2 AS _two");
     do {
       $res = $mysqli->store_result();
       var_dump($res->fetch_assoc());
       printf("%s\n", str_repeat("-", 40));
     } while ($mysqli->more_results() && $mysqli->next_result());
     ?>

The above example will output:


     array(1) {
       ["_one"]=>
       string(1) "1"
     }
     ----------------------------------------
     proxy::moreResults(array (
       0 => NULL,
     ))
     proxy::moreResults returns true
     proxy::moreResults(array (
       0 => NULL,
     ))
     proxy::moreResults returns true
     array(1) {
       ["_two"]=>
       string(1) "2"
     }
     ----------------------------------------
     proxy::moreResults(array (
       0 => NULL,
     ))
     proxy::moreResults returns false

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_more_results'


File: manual.info,  Node: apis-php-mysqlnduhconnection.nextresult,  Next: apis-php-mysqlnduhconnection.ping,  Prev: apis-php-mysqlnduhconnection.moreresults,  Up: apis-php-class.mysqlnduhconnection

22.9.4.43 `MysqlndUhConnection::nextResult'
...........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::nextResult'

     Prepare next result from multi_query

*Description*

public boolMysqlndUhConnection::nextResult

mysqlnd_connectionconnection

Prepare next result from multi_query.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function nextResult($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::nextResult($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->multi_query("SELECT 1 AS _one; SELECT 2 AS _two");
     do {
       $res = $mysqli->store_result();
       var_dump($res->fetch_assoc());
       printf("%s\n", str_repeat("-", 40));
     } while ($mysqli->more_results() && $mysqli->next_result());
     ?>

The above example will output:


     array(1) {
       ["_one"]=>
       string(1) "1"
     }
     ----------------------------------------
     proxy::nextResult(array (
       0 => NULL,
     ))
     proxy::nextResult returns true
     array(1) {
       ["_two"]=>
       string(1) "2"
     }
     ----------------------------------------

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_next_result'


File: manual.info,  Node: apis-php-mysqlnduhconnection.ping,  Next: apis-php-mysqlnduhconnection.query,  Prev: apis-php-mysqlnduhconnection.nextresult,  Up: apis-php-class.mysqlnduhconnection

22.9.4.44 `MysqlndUhConnection::ping'
.....................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::ping'

     Pings a server connection, or tries to reconnect if the connection
     has gone down

*Description*

public boolMysqlndUhConnection::ping

mysqlnd_connectionconnection

Pings a server connection, or tries to reconnect if the connection has
gone down.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function ping($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::ping($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->ping();
     ?>

The above example will output:


     proxy::ping(array (
       0 => NULL,
     ))
     proxy::ping returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_ping'

`mysql_ping'


File: manual.info,  Node: apis-php-mysqlnduhconnection.query,  Next: apis-php-mysqlnduhconnection.queryreadresultsetheader,  Prev: apis-php-mysqlnduhconnection.ping,  Up: apis-php-class.mysqlnduhconnection

22.9.4.45 `MysqlndUhConnection::query'
......................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::query'

     Performs a query on the database

*Description*

public boolMysqlndUhConnection::query

mysqlnd_connectionconnection

stringquery

Performs a query on the database (COM_QUERY).

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

  2. query

     The query string.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function query($res, $query) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $query = "SELECT 'How about query rewriting?'";
       $ret = parent::query($res, $query);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $res = $mysqli->query("SELECT 'Welcome mysqlnd_uh!' FROM DUAL");
     var_dump($res->fetch_assoc());
     ?>

The above example will output:


     proxy::query(array (
       0 => NULL,
       1 => 'SELECT \'Welcome mysqlnd_uh!\' FROM DUAL',
     ))
     proxy::query returns true
     array(1) {
       ["How about query rewriting?"]=>
       string(26) "How about query rewriting?"
     }

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_query'

`mysql_query'


File: manual.info,  Node: apis-php-mysqlnduhconnection.queryreadresultsetheader,  Next: apis-php-mysqlnduhconnection.reapquery,  Prev: apis-php-mysqlnduhconnection.query,  Up: apis-php-class.mysqlnduhconnection

22.9.4.46 `MysqlndUhConnection::queryReadResultsetHeader'
.........................................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::queryReadResultsetHeader'

     Read a result set header

*Description*

public boolMysqlndUhConnection::queryReadResultsetHeader

mysqlnd_connectionconnection

mysqlnd_statementmysqlnd_stmt

Read a result set header.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

  2. mysqlnd_stmt

     Mysqlnd statement handle. Do not modify! Set to

     NULL

     , if function is not used in the context of a prepared statement.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function queryReadResultsetHeader($res, $stmt) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::queryReadResultsetHeader($res, $stmt);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $res = $mysqli->query("SELECT 'Welcome mysqlnd_uh!' FROM DUAL");
     var_dump($res->fetch_assoc());
     ?>

The above example will output:


     proxy::queryReadResultsetHeader(array (
       0 => NULL,
       1 => NULL,
     ))
     proxy::queryReadResultsetHeader returns true
     array(1) {
       ["Welcome mysqlnd_uh!"]=>
       string(19) "Welcome mysqlnd_uh!"
     }

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.


File: manual.info,  Node: apis-php-mysqlnduhconnection.reapquery,  Next: apis-php-mysqlnduhconnection.refreshserver,  Prev: apis-php-mysqlnduhconnection.queryreadresultsetheader,  Up: apis-php-class.mysqlnduhconnection

22.9.4.47 `MysqlndUhConnection::reapQuery'
..........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::reapQuery'

     Get result from async query

*Description*

public boolMysqlndUhConnection::reapQuery

mysqlnd_connectionconnection

Get result from async query.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function reapQuery($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::reapQuery($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $conn1 = new mysqli("localhost", "root", "", "test");
     $conn2 = new mysqli("localhost", "root", "", "test");

     $conn1->query("SELECT 1 as 'one', SLEEP(1) AS _sleep FROM DUAL", MYSQLI_ASYNC |  MYSQLI_USE_RESULT);
     $conn2->query("SELECT 1.1 as 'one dot one' FROM DUAL", MYSQLI_ASYNC |  MYSQLI_USE_RESULT);

     $links = array(
      $conn1->thread_id => array('link' => $conn1, 'processed' => false),
      $conn2->thread_id => array('link' => $conn2, 'processed' => false)
     );

     $saved_errors = array();
     do {
      $poll_links = $poll_errors = $poll_reject = array();
      foreach ($links as $thread_id => $link) {
       if (!$link['processed']) {
        $poll_links[] = $link['link'];
        $poll_errors[] = $link['link'];
        $poll_reject[] = $link['link'];
       }
      }
      if (0 == count($poll_links))
       break;

      if (0 == ($num_ready = mysqli_poll($poll_links, $poll_errors, $poll_reject, 0, 200000)))
       continue;

      if (!empty($poll_errors)) {
       die(var_dump($poll_errors));
      }

      foreach ($poll_links as $link) {
       $thread_id = mysqli_thread_id($link);
       $links[$thread_id]['processed'] = true;

       if (is_object($res = mysqli_reap_async_query($link))) {
        // result set object
        while ($row = mysqli_fetch_assoc($res)) {
         // eat up all results
         var_dump($row);
        }
        mysqli_free_result($res);
       } else {
        // either there is no result (no SELECT) or there is an error
        if (mysqli_errno($link) > 0) {
         $saved_errors[$thread_id] = mysqli_errno($link);
         printf("'%s' caused %d\n", $links[$thread_id]['query'],     mysqli_errno($link));
        }
       }
      }
     } while (true);
     ?>

The above example will output:


     proxy::reapQuery(array (
       0 => NULL,
     ))
     proxy::reapQuery returns true
     array(1) {
       ["one dot one"]=>
       string(3) "1.1"
     }
     proxy::reapQuery(array (
       0 => NULL,
     ))
     proxy::reapQuery returns true
     array(2) {
       ["one"]=>
       string(1) "1"
       ["_sleep"]=>
       string(1) "0"
     }

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_real_async_query' (http://www.php.net/mysqli_real_async_query)


File: manual.info,  Node: apis-php-mysqlnduhconnection.refreshserver,  Next: apis-php-mysqlnduhconnection.restartpsession,  Prev: apis-php-mysqlnduhconnection.reapquery,  Up: apis-php-class.mysqlnduhconnection

22.9.4.48 `MysqlndUhConnection::refreshServer'
..............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::refreshServer'

     Flush or reset tables and caches

*Description*

public boolMysqlndUhConnection::refreshServer

mysqlnd_connectionconnection

intoptions

Flush or reset tables and caches.

*Warning*:

This function is currently not documented; only its argument list is
available.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

  2. options

     What to refresh.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function refreshServer($res, $option) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::refreshServer($res, $option);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());
     $mysqli = new mysqli("localhost", "root", "", "test");
     mysqli_refresh($mysqli, 1);
     ?>

The above example will output:


     proxy::refreshServer(array (
       0 => NULL,
       1 => 1,
     ))
     proxy::refreshServer returns false

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.


File: manual.info,  Node: apis-php-mysqlnduhconnection.restartpsession,  Next: apis-php-mysqlnduhconnection.selectdb,  Prev: apis-php-mysqlnduhconnection.refreshserver,  Up: apis-php-class.mysqlnduhconnection

22.9.4.49 `MysqlndUhConnection::restartPSession'
................................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::restartPSession'

     Restart a persistent mysqlnd connection

*Description*

public boolMysqlndUhConnection::restartPSession

mysqlnd_connectionconnection

Restart a persistent mysqlnd connection.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function ping($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::ping($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->ping();
     ?>

The above example will output:


     proxy::restartPSession(array (
       0 => NULL,
     ))
     proxy::restartPSession returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.


File: manual.info,  Node: apis-php-mysqlnduhconnection.selectdb,  Next: apis-php-mysqlnduhconnection.sendclose,  Prev: apis-php-mysqlnduhconnection.restartpsession,  Up: apis-php-class.mysqlnduhconnection

22.9.4.50 `MysqlndUhConnection::selectDb'
.........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::selectDb'

     Selects the default database for database queries

*Description*

public boolMysqlndUhConnection::selectDb

mysqlnd_connectionconnection

stringdatabase

Selects the default database for database queries.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

  2. database

     The database name.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function selectDb($res, $database) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::selectDb($res, $database);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());
     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->select_db("mysql");
     ?>

The above example will output:


     proxy::selectDb(array (
       0 => NULL,
       1 => 'mysql',
     ))
     proxy::selectDb returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_select_db'

`mysql_select_db'


File: manual.info,  Node: apis-php-mysqlnduhconnection.sendclose,  Next: apis-php-mysqlnduhconnection.sendquery,  Prev: apis-php-mysqlnduhconnection.selectdb,  Up: apis-php-class.mysqlnduhconnection

22.9.4.51 `MysqlndUhConnection::sendClose'
..........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::sendClose'

     Sends a close command to MySQL

*Description*

public boolMysqlndUhConnection::sendClose

mysqlnd_connectionconnection

Sends a close command to MySQL.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function sendClose($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::sendClose($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());
     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->close();
     ?>

The above example will output:


     proxy::sendClose(array (
       0 => NULL,
     ))
     proxy::sendClose returns true
     proxy::sendClose(array (
       0 => NULL,
     ))
     proxy::sendClose returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.


File: manual.info,  Node: apis-php-mysqlnduhconnection.sendquery,  Next: apis-php-mysqlnduhconnection.serverdumpdebuginformation,  Prev: apis-php-mysqlnduhconnection.sendclose,  Up: apis-php-class.mysqlnduhconnection

22.9.4.52 `MysqlndUhConnection::sendQuery'
..........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::sendQuery'

     Sends a query to MySQL

*Description*

public boolMysqlndUhConnection::sendQuery

mysqlnd_connectionconnection

stringquery

Sends a query to MySQL.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

  2. query

     The query string.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function sendQuery($res, $query) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::sendQuery($res, $query);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());
     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->query("SELECT 1");
     ?>

The above example will output:


     proxy::sendQuery(array (
       0 => NULL,
       1 => 'SELECT 1',
     ))
     proxy::sendQuery returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.


File: manual.info,  Node: apis-php-mysqlnduhconnection.serverdumpdebuginformation,  Next: apis-php-mysqlnduhconnection.setautocommit,  Prev: apis-php-mysqlnduhconnection.sendquery,  Up: apis-php-class.mysqlnduhconnection

22.9.4.53 `MysqlndUhConnection::serverDumpDebugInformation'
...........................................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::serverDumpDebugInformation'

     Dump debugging information into the log for the MySQL server

*Description*

public boolMysqlndUhConnection::serverDumpDebugInformation

mysqlnd_connectionconnection

Dump debugging information into the log for the MySQL server.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function serverDumpDebugInformation($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::serverDumpDebugInformation($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());
     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->dump_debug_info();
     ?>

The above example will output:


     proxy::serverDumpDebugInformation(array (
       0 => NULL,
     ))
     proxy::serverDumpDebugInformation returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_dump_debug_info'


File: manual.info,  Node: apis-php-mysqlnduhconnection.setautocommit,  Next: apis-php-mysqlnduhconnection.setcharset,  Prev: apis-php-mysqlnduhconnection.serverdumpdebuginformation,  Up: apis-php-class.mysqlnduhconnection

22.9.4.54 `MysqlndUhConnection::setAutocommit'
..............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::setAutocommit'

     Turns on or off auto-committing database modifications

*Description*

public boolMysqlndUhConnection::setAutocommit

mysqlnd_connectionconnection

intmode

Turns on or off auto-committing database modifications

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

  2. mode

     Whether to turn on auto-commit or not.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function setAutocommit($res, $mode) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::setAutocommit($res, $mode);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());
     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->autocommit(false);
     $mysqli->autocommit(true);
     ?>

The above example will output:


     proxy::setAutocommit(array (
       0 => NULL,
       1 => 0,
     ))
     proxy::setAutocommit returns true
     proxy::setAutocommit(array (
       0 => NULL,
       1 => 1,
     ))
     proxy::setAutocommit returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_autocommit'


File: manual.info,  Node: apis-php-mysqlnduhconnection.setcharset,  Next: apis-php-mysqlnduhconnection.setclientoption,  Prev: apis-php-mysqlnduhconnection.setautocommit,  Up: apis-php-class.mysqlnduhconnection

22.9.4.55 `MysqlndUhConnection::setCharset'
...........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::setCharset'

     Sets the default client character set

*Description*

public boolMysqlndUhConnection::setCharset

mysqlnd_connectionconnection

stringcharset

Sets the default client character set.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

  2. charset

     The charset to be set as default.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function setCharset($res, $charset) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::setCharset($res, $charset);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());
     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->set_charset("latin1");
     ?>

The above example will output:


     proxy::setCharset(array (
       0 => NULL,
       1 => 'latin1',
     ))
     proxy::setCharset returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_set_charset'


File: manual.info,  Node: apis-php-mysqlnduhconnection.setclientoption,  Next: apis-php-mysqlnduhconnection.setserveroption,  Prev: apis-php-mysqlnduhconnection.setcharset,  Up: apis-php-class.mysqlnduhconnection

22.9.4.56 `MysqlndUhConnection::setClientOption'
................................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::setClientOption'

     Sets a client option

*Description*

public boolMysqlndUhConnection::setClientOption

mysqlnd_connectionconnection

intoption

intvalue

Sets a client option.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

  2. option

     The option to be set.

  3. value

     Optional option value, if required.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     function client_option_to_string($option) {
      static $mapping = array(
       MYSQLND_UH_MYSQLND_OPTION_OPT_CONNECT_TIMEOUT => "MYSQLND_UH_MYSQLND_OPTION_OPT_CONNECT_TIMEOUT",
       MYSQLND_UH_MYSQLND_OPTION_OPT_COMPRESS => "MYSQLND_UH_MYSQLND_OPTION_OPT_COMPRESS",
       MYSQLND_UH_MYSQLND_OPTION_OPT_NAMED_PIPE => "MYSQLND_UH_MYSQLND_OPTION_OPT_NAMED_PIPE",
       MYSQLND_UH_MYSQLND_OPTION_INIT_COMMAND => "MYSQLND_UH_MYSQLND_OPTION_INIT_COMMAND",
       MYSQLND_UH_MYSQLND_READ_DEFAULT_FILE => "MYSQLND_UH_MYSQLND_READ_DEFAULT_FILE",
       MYSQLND_UH_MYSQLND_READ_DEFAULT_GROUP => "MYSQLND_UH_MYSQLND_READ_DEFAULT_GROUP",
       MYSQLND_UH_MYSQLND_SET_CHARSET_DIR => "MYSQLND_UH_MYSQLND_SET_CHARSET_DIR",
       MYSQLND_UH_MYSQLND_SET_CHARSET_NAME => "MYSQLND_UH_MYSQLND_SET_CHARSET_NAME",
       MYSQLND_UH_MYSQLND_OPT_LOCAL_INFILE => "MYSQLND_UH_MYSQLND_OPT_LOCAL_INFILE",
       MYSQLND_UH_MYSQLND_OPT_PROTOCOL => "MYSQLND_UH_MYSQLND_OPT_PROTOCOL",
       MYSQLND_UH_MYSQLND_SHARED_MEMORY_BASE_NAME => "MYSQLND_UH_MYSQLND_SHARED_MEMORY_BASE_NAME",
       MYSQLND_UH_MYSQLND_OPT_READ_TIMEOUT => "MYSQLND_UH_MYSQLND_OPT_READ_TIMEOUT",
       MYSQLND_UH_MYSQLND_OPT_WRITE_TIMEOUT => "MYSQLND_UH_MYSQLND_OPT_WRITE_TIMEOUT",
       MYSQLND_UH_MYSQLND_OPT_USE_RESULT => "MYSQLND_UH_MYSQLND_OPT_USE_RESULT",
       MYSQLND_UH_MYSQLND_OPT_USE_REMOTE_CONNECTION => "MYSQLND_UH_MYSQLND_OPT_USE_REMOTE_CONNECTION",
       MYSQLND_UH_MYSQLND_OPT_USE_EMBEDDED_CONNECTION => "MYSQLND_UH_MYSQLND_OPT_USE_EMBEDDED_CONNECTION",
       MYSQLND_UH_MYSQLND_OPT_GUESS_CONNECTION => "MYSQLND_UH_MYSQLND_OPT_GUESS_CONNECTION",
       MYSQLND_UH_MYSQLND_SET_CLIENT_IP => "MYSQLND_UH_MYSQLND_SET_CLIENT_IP",
       MYSQLND_UH_MYSQLND_SECURE_AUTH => "MYSQLND_UH_MYSQLND_SECURE_AUTH",
       MYSQLND_UH_MYSQLND_REPORT_DATA_TRUNCATION => "MYSQLND_UH_MYSQLND_REPORT_DATA_TRUNCATION",
       MYSQLND_UH_MYSQLND_OPT_RECONNECT => "MYSQLND_UH_MYSQLND_OPT_RECONNECT",
       MYSQLND_UH_MYSQLND_OPT_SSL_VERIFY_SERVER_CERT => "MYSQLND_UH_MYSQLND_OPT_SSL_VERIFY_SERVER_CERT",
       MYSQLND_UH_MYSQLND_OPT_NET_CMD_BUFFER_SIZE => "MYSQLND_UH_MYSQLND_OPT_NET_CMD_BUFFER_SIZE",
       MYSQLND_UH_MYSQLND_OPT_NET_READ_BUFFER_SIZE => "MYSQLND_UH_MYSQLND_OPT_NET_READ_BUFFER_SIZE",
       MYSQLND_UH_MYSQLND_OPT_SSL_KEY => "MYSQLND_UH_MYSQLND_OPT_SSL_KEY",
       MYSQLND_UH_MYSQLND_OPT_SSL_CERT => "MYSQLND_UH_MYSQLND_OPT_SSL_CERT",
       MYSQLND_UH_MYSQLND_OPT_SSL_CA => "MYSQLND_UH_MYSQLND_OPT_SSL_CA",
       MYSQLND_UH_MYSQLND_OPT_SSL_CAPATH => "MYSQLND_UH_MYSQLND_OPT_SSL_CAPATH",
       MYSQLND_UH_MYSQLND_OPT_SSL_CIPHER => "MYSQLND_UH_MYSQLND_OPT_SSL_CIPHER",
       MYSQLND_UH_MYSQLND_OPT_SSL_PASSPHRASE => "MYSQLND_UH_MYSQLND_OPT_SSL_PASSPHRASE",
       MYSQLND_UH_SERVER_OPTION_PLUGIN_DIR => "MYSQLND_UH_SERVER_OPTION_PLUGIN_DIR",
       MYSQLND_UH_SERVER_OPTION_DEFAULT_AUTH => "MYSQLND_UH_SERVER_OPTION_DEFAULT_AUTH",
       MYSQLND_UH_SERVER_OPTION_SET_CLIENT_IP => "MYSQLND_UH_SERVER_OPTION_SET_CLIENT_IP"
      );
      if (version_compare(PHP_VERSION, '5.3.99-dev', '>')) {
       $mapping[MYSQLND_UH_MYSQLND_OPT_MAX_ALLOWED_PACKET] = "MYSQLND_UH_MYSQLND_OPT_MAX_ALLOWED_PACKET";
       $mapping[MYSQLND_UH_MYSQLND_OPT_AUTH_PROTOCOL] = "MYSQLND_UH_MYSQLND_OPT_AUTH_PROTOCOL";
      }
      if (defined("MYSQLND_UH_MYSQLND_OPT_INT_AND_FLOAT_NATIVE")) {
       /* special mysqlnd build */
       $mapping["MYSQLND_UH_MYSQLND_OPT_INT_AND_FLOAT_NATIVE"] = "MYSQLND_UH_MYSQLND_OPT_INT_AND_FLOAT_NATIVE";
      }
      return (isset($mapping[$option])) ? $mapping[$option] : 'unknown';
     }

     class proxy extends MysqlndUhConnection {
      public function setClientOption($res, $option, $value) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       printf("Option '%s' set to %s\n", client_option_to_string($option), var_export($value, true));
       $ret = parent::setClientOption($res, $option, $value);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());
     $mysqli = new mysqli("localhost", "root", "", "test");
     ?>

The above example will output:


     proxy::setClientOption(array (
       0 => NULL,
       1 => 210,
       2 => 3221225472,
     ))
     Option 'MYSQLND_UH_MYSQLND_OPT_MAX_ALLOWED_PACKET' set to 3221225472
     proxy::setClientOption returns true
     proxy::setClientOption(array (
       0 => NULL,
       1 => 211,
       2 => 'mysql_native_password',
     ))
     Option 'MYSQLND_UH_MYSQLND_OPT_AUTH_PROTOCOL' set to 'mysql_native_password'
     proxy::setClientOption returns true
     proxy::setClientOption(array (
       0 => NULL,
       1 => 8,
       2 => 1,
     ))
     Option 'MYSQLND_UH_MYSQLND_OPT_LOCAL_INFILE' set to 1
     proxy::setClientOption returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_real_connect'

`mysqli_options'


File: manual.info,  Node: apis-php-mysqlnduhconnection.setserveroption,  Next: apis-php-mysqlnduhconnection.shutdownserver,  Prev: apis-php-mysqlnduhconnection.setclientoption,  Up: apis-php-class.mysqlnduhconnection

22.9.4.57 `MysqlndUhConnection::setServerOption'
................................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::setServerOption'

     Sets a server option

*Description*

public voidMysqlndUhConnection::setServerOption

mysqlnd_connectionconnection

intoption

Sets a server option.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

  2. option

     The option to be set.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     function server_option_to_string($option) {
      $ret = 'unknown';
      switch ($option) {
       case MYSQLND_UH_SERVER_OPTION_MULTI_STATEMENTS_ON:
        $ret = 'MYSQLND_UH_SERVER_OPTION_MULTI_STATEMENTS_ON';
        break;
       case MYSQLND_UH_SERVER_OPTION_MULTI_STATEMENTS_OFF:
        $ret = 'MYSQLND_UH_SERVER_OPTION_MULTI_STATEMENTS_ON';
        break;
      }
      return $ret;
     }

     class proxy extends MysqlndUhConnection {
      public function setServerOption($res, $option) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       printf("Option '%s' set\n", server_option_to_string($option));
       $ret = parent::setServerOption($res, $option);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());
     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->multi_query("SELECT 1; SELECT 2");
     ?>

The above example will output:


     proxy::setServerOption(array (
       0 => NULL,
       1 => 0,
     ))
     Option 'MYSQLND_UH_SERVER_OPTION_MULTI_STATEMENTS_ON' set
     proxy::setServerOption returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_real_connect'

`mysqli_options'

`mysqli_multi_query'


File: manual.info,  Node: apis-php-mysqlnduhconnection.shutdownserver,  Next: apis-php-mysqlnduhconnection.simplecommand,  Prev: apis-php-mysqlnduhconnection.setserveroption,  Up: apis-php-class.mysqlnduhconnection

22.9.4.58 `MysqlndUhConnection::shutdownServer'
...............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::shutdownServer'

     The shutdownServer purpose

*Description*

public voidMysqlndUhConnection::shutdownServer

stringMYSQLND_UH_RES_MYSQLND_NAME

string"level"

*Warning*:

This function is currently not documented; only its argument list is
available.

*Parameters*

  1. MYSQLND_UH_RES_MYSQLND_NAME

  2. "level"

*Return Values*


File: manual.info,  Node: apis-php-mysqlnduhconnection.simplecommand,  Next: apis-php-mysqlnduhconnection.simplecommandhandleresponse,  Prev: apis-php-mysqlnduhconnection.shutdownserver,  Up: apis-php-class.mysqlnduhconnection

22.9.4.59 `MysqlndUhConnection::simpleCommand'
..............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::simpleCommand'

     Sends a basic COM_* command

*Description*

public boolMysqlndUhConnection::simpleCommand

mysqlnd_connectionconnection

intcommand

stringarg

intok_packet

boolsilent

boolignore_upsert_status

Sends a basic COM_* command to MySQL.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

  2. command

     The COM command to be send.

  3. arg

     Optional COM command arguments.

  4. ok_packet

     The OK packet type.

  5. silent

     Whether mysqlnd may emit errors.

  6. ignore_upsert_status

     Whether to ignore `UPDATE'/`INSERT' status.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     function server_cmd_2_string($command) {
      $mapping = array(
       MYSQLND_UH_MYSQLND_COM_SLEEP => "MYSQLND_UH_MYSQLND_COM_SLEEP",
       MYSQLND_UH_MYSQLND_COM_QUIT => "MYSQLND_UH_MYSQLND_COM_QUIT",
       MYSQLND_UH_MYSQLND_COM_INIT_DB => "MYSQLND_UH_MYSQLND_COM_INIT_DB",
       MYSQLND_UH_MYSQLND_COM_QUERY => "MYSQLND_UH_MYSQLND_COM_QUERY",
       MYSQLND_UH_MYSQLND_COM_FIELD_LIST => "MYSQLND_UH_MYSQLND_COM_FIELD_LIST",
       MYSQLND_UH_MYSQLND_COM_CREATE_DB => "MYSQLND_UH_MYSQLND_COM_CREATE_DB",
       MYSQLND_UH_MYSQLND_COM_DROP_DB => "MYSQLND_UH_MYSQLND_COM_DROP_DB",
       MYSQLND_UH_MYSQLND_COM_REFRESH => "MYSQLND_UH_MYSQLND_COM_REFRESH",
       MYSQLND_UH_MYSQLND_COM_SHUTDOWN => "MYSQLND_UH_MYSQLND_COM_SHUTDOWN",
       MYSQLND_UH_MYSQLND_COM_STATISTICS => "MYSQLND_UH_MYSQLND_COM_STATISTICS",
       MYSQLND_UH_MYSQLND_COM_PROCESS_INFO => "MYSQLND_UH_MYSQLND_COM_PROCESS_INFO",
       MYSQLND_UH_MYSQLND_COM_CONNECT => "MYSQLND_UH_MYSQLND_COM_CONNECT",
       MYSQLND_UH_MYSQLND_COM_PROCESS_KILL => "MYSQLND_UH_MYSQLND_COM_PROCESS_KILL",
       MYSQLND_UH_MYSQLND_COM_DEBUG => "MYSQLND_UH_MYSQLND_COM_DEBUG",
       MYSQLND_UH_MYSQLND_COM_PING => "MYSQLND_UH_MYSQLND_COM_PING",
       MYSQLND_UH_MYSQLND_COM_TIME => "MYSQLND_UH_MYSQLND_COM_TIME",
       MYSQLND_UH_MYSQLND_COM_DELAYED_INSERT => "MYSQLND_UH_MYSQLND_COM_DELAYED_INSERT",
       MYSQLND_UH_MYSQLND_COM_CHANGE_USER => "MYSQLND_UH_MYSQLND_COM_CHANGE_USER",
       MYSQLND_UH_MYSQLND_COM_BINLOG_DUMP => "MYSQLND_UH_MYSQLND_COM_BINLOG_DUMP",
       MYSQLND_UH_MYSQLND_COM_TABLE_DUMP => "MYSQLND_UH_MYSQLND_COM_TABLE_DUMP",
       MYSQLND_UH_MYSQLND_COM_CONNECT_OUT => "MYSQLND_UH_MYSQLND_COM_CONNECT_OUT",
       MYSQLND_UH_MYSQLND_COM_REGISTER_SLAVED => "MYSQLND_UH_MYSQLND_COM_REGISTER_SLAVED",
       MYSQLND_UH_MYSQLND_COM_STMT_PREPARE => "MYSQLND_UH_MYSQLND_COM_STMT_PREPARE",
       MYSQLND_UH_MYSQLND_COM_STMT_EXECUTE => "MYSQLND_UH_MYSQLND_COM_STMT_EXECUTE",
       MYSQLND_UH_MYSQLND_COM_STMT_SEND_LONG_DATA => "MYSQLND_UH_MYSQLND_COM_STMT_SEND_LONG_DATA",
       MYSQLND_UH_MYSQLND_COM_STMT_CLOSE => "MYSQLND_UH_MYSQLND_COM_STMT_CLOSE",
       MYSQLND_UH_MYSQLND_COM_STMT_RESET => "MYSQLND_UH_MYSQLND_COM_STMT_RESET",
       MYSQLND_UH_MYSQLND_COM_SET_OPTION => "MYSQLND_UH_MYSQLND_COM_SET_OPTION",
       MYSQLND_UH_MYSQLND_COM_STMT_FETCH => "MYSQLND_UH_MYSQLND_COM_STMT_FETCH",
       MYSQLND_UH_MYSQLND_COM_DAEMON => "MYSQLND_UH_MYSQLND_COM_DAEMON",
       MYSQLND_UH_MYSQLND_COM_END => "MYSQLND_UH_MYSQLND_COM_END",
      );
      return (isset($mapping[$command])) ? $mapping[$command] : 'unknown';
     }

     function ok_packet_2_string($ok_packet) {
      $mapping = array(
       MYSQLND_UH_MYSQLND_PROT_GREET_PACKET => "MYSQLND_UH_MYSQLND_PROT_GREET_PACKET",
       MYSQLND_UH_MYSQLND_PROT_AUTH_PACKET => "MYSQLND_UH_MYSQLND_PROT_AUTH_PACKET",
       MYSQLND_UH_MYSQLND_PROT_OK_PACKET => "MYSQLND_UH_MYSQLND_PROT_OK_PACKET",
       MYSQLND_UH_MYSQLND_PROT_EOF_PACKET => "MYSQLND_UH_MYSQLND_PROT_EOF_PACKET",
       MYSQLND_UH_MYSQLND_PROT_CMD_PACKET => "MYSQLND_UH_MYSQLND_PROT_CMD_PACKET",
       MYSQLND_UH_MYSQLND_PROT_RSET_HEADER_PACKET => "MYSQLND_UH_MYSQLND_PROT_RSET_HEADER_PACKET",
       MYSQLND_UH_MYSQLND_PROT_RSET_FLD_PACKET => "MYSQLND_UH_MYSQLND_PROT_RSET_FLD_PACKET",
       MYSQLND_UH_MYSQLND_PROT_ROW_PACKET => "MYSQLND_UH_MYSQLND_PROT_ROW_PACKET",
       MYSQLND_UH_MYSQLND_PROT_STATS_PACKET => "MYSQLND_UH_MYSQLND_PROT_STATS_PACKET",
       MYSQLND_UH_MYSQLND_PREPARE_RESP_PACKET => "MYSQLND_UH_MYSQLND_PREPARE_RESP_PACKET",
       MYSQLND_UH_MYSQLND_CHG_USER_RESP_PACKET => "MYSQLND_UH_MYSQLND_CHG_USER_RESP_PACKET",
       MYSQLND_UH_MYSQLND_PROT_LAST => "MYSQLND_UH_MYSQLND_PROT_LAST",
      );
      return (isset($mapping[$ok_packet])) ? $mapping[$ok_packet] : 'unknown';
     }

     class proxy extends MysqlndUhConnection {
      public function simpleCommand($conn, $command, $arg, $ok_packet, $silent, $ignore_upsert_status) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       printf("Command '%s'\n", server_cmd_2_string($command));
       printf("OK packet '%s'\n",  ok_packet_2_string($ok_packet));
       $ret = parent::simpleCommand($conn, $command, $arg, $ok_packet, $silent, $ignore_upsert_status);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());
     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->query("SELECT 1");
     ?>

The above example will output:


     proxy::simpleCommand(array (
       0 => NULL,
       1 => 3,
       2 => 'SELECT 1',
       3 => 13,
       4 => false,
       5 => false,
     ))
     Command 'MYSQLND_UH_MYSQLND_COM_QUERY'
     OK packet 'MYSQLND_UH_MYSQLND_PROT_LAST'
     proxy::simpleCommand returns true
     :)proxy::simpleCommand(array (
       0 => NULL,
       1 => 1,
       2 => '',
       3 => 13,
       4 => true,
       5 => true,
     ))
     Command 'MYSQLND_UH_MYSQLND_COM_QUIT'
     OK packet 'MYSQLND_UH_MYSQLND_PROT_LAST'
     proxy::simpleCommand returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.


File: manual.info,  Node: apis-php-mysqlnduhconnection.simplecommandhandleresponse,  Next: apis-php-mysqlnduhconnection.sslset,  Prev: apis-php-mysqlnduhconnection.simplecommand,  Up: apis-php-class.mysqlnduhconnection

22.9.4.60 `MysqlndUhConnection::simpleCommandHandleResponse'
............................................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::simpleCommandHandleResponse'

     Process a response for a basic COM_* command send to the client

*Description*

public boolMysqlndUhConnection::simpleCommandHandleResponse

mysqlnd_connectionconnection

intok_packet

boolsilent

intcommand

boolignore_upsert_status

Process a response for a basic COM_* command send to the client.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

  2. ok_packet

     The OK packet type.

  3. silent

     Whether mysqlnd may emit errors.

  4. command

     The COM command to process results from.

  5. ignore_upsert_status

     Whether to ignore `UPDATE'/`INSERT' status.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     function server_cmd_2_string($command) {
      $mapping = array(
       MYSQLND_UH_MYSQLND_COM_SLEEP => "MYSQLND_UH_MYSQLND_COM_SLEEP",
       MYSQLND_UH_MYSQLND_COM_QUIT => "MYSQLND_UH_MYSQLND_COM_QUIT",
       MYSQLND_UH_MYSQLND_COM_INIT_DB => "MYSQLND_UH_MYSQLND_COM_INIT_DB",
       MYSQLND_UH_MYSQLND_COM_QUERY => "MYSQLND_UH_MYSQLND_COM_QUERY",
       MYSQLND_UH_MYSQLND_COM_FIELD_LIST => "MYSQLND_UH_MYSQLND_COM_FIELD_LIST",
       MYSQLND_UH_MYSQLND_COM_CREATE_DB => "MYSQLND_UH_MYSQLND_COM_CREATE_DB",
       MYSQLND_UH_MYSQLND_COM_DROP_DB => "MYSQLND_UH_MYSQLND_COM_DROP_DB",
       MYSQLND_UH_MYSQLND_COM_REFRESH => "MYSQLND_UH_MYSQLND_COM_REFRESH",
       MYSQLND_UH_MYSQLND_COM_SHUTDOWN => "MYSQLND_UH_MYSQLND_COM_SHUTDOWN",
       MYSQLND_UH_MYSQLND_COM_STATISTICS => "MYSQLND_UH_MYSQLND_COM_STATISTICS",
       MYSQLND_UH_MYSQLND_COM_PROCESS_INFO => "MYSQLND_UH_MYSQLND_COM_PROCESS_INFO",
       MYSQLND_UH_MYSQLND_COM_CONNECT => "MYSQLND_UH_MYSQLND_COM_CONNECT",
       MYSQLND_UH_MYSQLND_COM_PROCESS_KILL => "MYSQLND_UH_MYSQLND_COM_PROCESS_KILL",
       MYSQLND_UH_MYSQLND_COM_DEBUG => "MYSQLND_UH_MYSQLND_COM_DEBUG",
       MYSQLND_UH_MYSQLND_COM_PING => "MYSQLND_UH_MYSQLND_COM_PING",
       MYSQLND_UH_MYSQLND_COM_TIME => "MYSQLND_UH_MYSQLND_COM_TIME",
       MYSQLND_UH_MYSQLND_COM_DELAYED_INSERT => "MYSQLND_UH_MYSQLND_COM_DELAYED_INSERT",
       MYSQLND_UH_MYSQLND_COM_CHANGE_USER => "MYSQLND_UH_MYSQLND_COM_CHANGE_USER",
       MYSQLND_UH_MYSQLND_COM_BINLOG_DUMP => "MYSQLND_UH_MYSQLND_COM_BINLOG_DUMP",
       MYSQLND_UH_MYSQLND_COM_TABLE_DUMP => "MYSQLND_UH_MYSQLND_COM_TABLE_DUMP",
       MYSQLND_UH_MYSQLND_COM_CONNECT_OUT => "MYSQLND_UH_MYSQLND_COM_CONNECT_OUT",
       MYSQLND_UH_MYSQLND_COM_REGISTER_SLAVED => "MYSQLND_UH_MYSQLND_COM_REGISTER_SLAVED",
       MYSQLND_UH_MYSQLND_COM_STMT_PREPARE => "MYSQLND_UH_MYSQLND_COM_STMT_PREPARE",
       MYSQLND_UH_MYSQLND_COM_STMT_EXECUTE => "MYSQLND_UH_MYSQLND_COM_STMT_EXECUTE",
       MYSQLND_UH_MYSQLND_COM_STMT_SEND_LONG_DATA => "MYSQLND_UH_MYSQLND_COM_STMT_SEND_LONG_DATA",
       MYSQLND_UH_MYSQLND_COM_STMT_CLOSE => "MYSQLND_UH_MYSQLND_COM_STMT_CLOSE",
       MYSQLND_UH_MYSQLND_COM_STMT_RESET => "MYSQLND_UH_MYSQLND_COM_STMT_RESET",
       MYSQLND_UH_MYSQLND_COM_SET_OPTION => "MYSQLND_UH_MYSQLND_COM_SET_OPTION",
       MYSQLND_UH_MYSQLND_COM_STMT_FETCH => "MYSQLND_UH_MYSQLND_COM_STMT_FETCH",
       MYSQLND_UH_MYSQLND_COM_DAEMON => "MYSQLND_UH_MYSQLND_COM_DAEMON",
       MYSQLND_UH_MYSQLND_COM_END => "MYSQLND_UH_MYSQLND_COM_END",
      );
      return (isset($mapping[$command])) ? $mapping[$command] : 'unknown';
     }

     function ok_packet_2_string($ok_packet) {
      $mapping = array(
       MYSQLND_UH_MYSQLND_PROT_GREET_PACKET => "MYSQLND_UH_MYSQLND_PROT_GREET_PACKET",
       MYSQLND_UH_MYSQLND_PROT_AUTH_PACKET => "MYSQLND_UH_MYSQLND_PROT_AUTH_PACKET",
       MYSQLND_UH_MYSQLND_PROT_OK_PACKET => "MYSQLND_UH_MYSQLND_PROT_OK_PACKET",
       MYSQLND_UH_MYSQLND_PROT_EOF_PACKET => "MYSQLND_UH_MYSQLND_PROT_EOF_PACKET",
       MYSQLND_UH_MYSQLND_PROT_CMD_PACKET => "MYSQLND_UH_MYSQLND_PROT_CMD_PACKET",
       MYSQLND_UH_MYSQLND_PROT_RSET_HEADER_PACKET => "MYSQLND_UH_MYSQLND_PROT_RSET_HEADER_PACKET",
       MYSQLND_UH_MYSQLND_PROT_RSET_FLD_PACKET => "MYSQLND_UH_MYSQLND_PROT_RSET_FLD_PACKET",
       MYSQLND_UH_MYSQLND_PROT_ROW_PACKET => "MYSQLND_UH_MYSQLND_PROT_ROW_PACKET",
       MYSQLND_UH_MYSQLND_PROT_STATS_PACKET => "MYSQLND_UH_MYSQLND_PROT_STATS_PACKET",
       MYSQLND_UH_MYSQLND_PREPARE_RESP_PACKET => "MYSQLND_UH_MYSQLND_PREPARE_RESP_PACKET",
       MYSQLND_UH_MYSQLND_CHG_USER_RESP_PACKET => "MYSQLND_UH_MYSQLND_CHG_USER_RESP_PACKET",
       MYSQLND_UH_MYSQLND_PROT_LAST => "MYSQLND_UH_MYSQLND_PROT_LAST",
      );
      return (isset($mapping[$ok_packet])) ? $mapping[$ok_packet] : 'unknown';
     }

     class proxy extends MysqlndUhConnection {
      public function simpleCommandHandleResponse($conn, $ok_packet, $silent, $command, $ignore_upsert_status) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       printf("Command '%s'\n", server_cmd_2_string($command));
       printf("OK packet '%s'\n",  ok_packet_2_string($ok_packet));
       $ret = parent::simpleCommandHandleResponse($conn, $ok_packet, $silent, $command, $ignore_upsert_status);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());
     $mysql = mysql_connect("localhost", "root", "");
     mysql_query("SELECT 1 FROM DUAL", $mysql);
     ?>

The above example will output:


     proxy::simpleCommandHandleResponse(array (
       0 => NULL,
       1 => 5,
       2 => false,
       3 => 27,
       4 => true,
     ))
     Command 'MYSQLND_UH_MYSQLND_COM_SET_OPTION'
     OK packet 'MYSQLND_UH_MYSQLND_PROT_EOF_PACKET'
     proxy::simpleCommandHandleResponse returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.


File: manual.info,  Node: apis-php-mysqlnduhconnection.sslset,  Next: apis-php-mysqlnduhconnection.stmtinit,  Prev: apis-php-mysqlnduhconnection.simplecommandhandleresponse,  Up: apis-php-class.mysqlnduhconnection

22.9.4.61 `MysqlndUhConnection::sslSet'
.......................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::sslSet'

     Used for establishing secure connections using SSL

*Description*

public boolMysqlndUhConnection::sslSet

mysqlnd_connectionconnection

stringkey

stringcert

stringca

stringcapath

stringcipher

Used for establishing secure connections using SSL.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

  2. key

     The path name to the key file.

  3. cert

     The path name to the certificate file.

  4. ca

     The path name to the certificate authority file.

  5. capath

     The pathname to a directory that contains trusted SSL CA
     certificates in PEM format.

  6. cipher

     A list of allowable ciphers to use for SSL encryption.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function sslSet($conn, $key, $cert, $ca, $capath, $cipher) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::sslSet($conn, $key, $cert, $ca, $capath, $cipher);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());
     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->ssl_set("key", "cert", "ca", "capath", "cipher");
     ?>

The above example will output:


     proxy::sslSet(array (
       0 => NULL,
       1 => 'key',
       2 => 'cert',
       3 => 'ca',
       4 => 'capath',
       5 => 'cipher',
     ))
     proxy::sslSet returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_ssl_set'


File: manual.info,  Node: apis-php-mysqlnduhconnection.stmtinit,  Next: apis-php-mysqlnduhconnection.storeresult,  Prev: apis-php-mysqlnduhconnection.sslset,  Up: apis-php-class.mysqlnduhconnection

22.9.4.62 `MysqlndUhConnection::stmtInit'
.........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::stmtInit'

     Initializes a statement and returns a resource for use with
     mysqli_statement::prepare

*Description*

public resourceMysqlndUhConnection::stmtInit

mysqlnd_connectionconnection

Initializes a statement and returns a resource for use with
mysqli_statement::prepare.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Resource of type `Mysqlnd Prepared Statement (internal only - you must
not modify it!)'. The documentation may also refer to such resources
using the alias name `mysqlnd_prepared_statement'.

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function stmtInit($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       var_dump($res);
       $ret = parent::stmtInit($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       var_dump($ret);
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());
     $mysqli = new mysqli("localhost", "root", "", "test");
     $stmt = $mysqli->prepare("SELECT 1 AS _one FROM DUAL");
     $stmt->execute();
     $one = NULL;
     $stmt->bind_result($one);
     $stmt->fetch();
     var_dump($one);
     ?>

The above example will output:


     proxy::stmtInit(array (
       0 => NULL,
     ))
     resource(19) of type (Mysqlnd Connection)
     proxy::stmtInit returns NULL
     resource(246) of type (Mysqlnd Prepared Statement (internal only - you must not modify it!))
     int(1)

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_stmt_init'


File: manual.info,  Node: apis-php-mysqlnduhconnection.storeresult,  Next: apis-php-mysqlnduhconnection.txcommit,  Prev: apis-php-mysqlnduhconnection.stmtinit,  Up: apis-php-class.mysqlnduhconnection

22.9.4.63 `MysqlndUhConnection::storeResult'
............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::storeResult'

     Transfers a result set from the last query

*Description*

public resourceMysqlndUhConnection::storeResult

mysqlnd_connectionconnection

Transfers a result set from the last query.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Resource of type `Mysqlnd Resultset (internal only - you must not
modify it!)'. The documentation may also refer to such resources using
the alias name `mysqlnd_resultset'.

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function storeResult($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::storeResult($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       var_dump($ret);
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $res = $mysqli->query("SELECT 'Also called buffered result' AS _msg FROM DUAL");
     var_dump($res->fetch_assoc());

     $mysqli->real_query("SELECT 'Good morning!' AS _msg FROM DUAL");
     $res = $mysqli->store_result();
     var_dump($res->fetch_assoc());
     ?>

The above example will output:


     proxy::storeResult(array (
       0 => NULL,
     ))
     proxy::storeResult returns NULL
     resource(475) of type (Mysqlnd Resultset (internal only - you must not modify it!))
     array(1) {
       ["_msg"]=>
       string(27) "Also called buffered result"
     }
     proxy::storeResult(array (
       0 => NULL,
     ))
     proxy::storeResult returns NULL
     resource(730) of type (Mysqlnd Resultset (internal only - you must not modify it!))
     array(1) {
       ["_msg"]=>
       string(13) "Good morning!"
     }

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_store_result'

`mysqli_real_query'


File: manual.info,  Node: apis-php-mysqlnduhconnection.txcommit,  Next: apis-php-mysqlnduhconnection.txrollback,  Prev: apis-php-mysqlnduhconnection.storeresult,  Up: apis-php-class.mysqlnduhconnection

22.9.4.64 `MysqlndUhConnection::txCommit'
.........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::txCommit'

     Commits the current transaction

*Description*

public boolMysqlndUhConnection::txCommit

mysqlnd_connectionconnection

Commits the current transaction.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function txCommit($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::txCommit($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->commit();
     ?>

The above example will output:


     proxy::txCommit(array (
       0 => NULL,
     ))
     proxy::txCommit returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_commit'


File: manual.info,  Node: apis-php-mysqlnduhconnection.txrollback,  Next: apis-php-mysqlnduhconnection.useresult,  Prev: apis-php-mysqlnduhconnection.txcommit,  Up: apis-php-class.mysqlnduhconnection

22.9.4.65 `MysqlndUhConnection::txRollback'
...........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::txRollback'

     Rolls back current transaction

*Description*

public boolMysqlndUhConnection::txRollback

mysqlnd_connectionconnection

Rolls back current transaction.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function txRollback($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::txRollback($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->rollback();
     ?>

The above example will output:


     proxy::txRollback(array (
       0 => NULL,
     ))
     proxy::txRollback returns true

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_commit'


File: manual.info,  Node: apis-php-mysqlnduhconnection.useresult,  Prev: apis-php-mysqlnduhconnection.txrollback,  Up: apis-php-class.mysqlnduhconnection

22.9.4.66 `MysqlndUhConnection::useResult'
..........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhConnection::useResult'

     Initiate a result set retrieval

*Description*

public resourceMysqlndUhConnection::useResult

mysqlnd_connectionconnection

Initiate a result set retrieval.

*Parameters*

  1. connection

     Mysqlnd connection handle. Do not modify!

*Return Values*

Resource of type `Mysqlnd Resultset (internal only - you must not
modify it!)'. The documentation may also refer to such resources using
the alias name `mysqlnd_resultset'.

*Examples*


     <?php
     class proxy extends MysqlndUhConnection {
      public function useResult($res) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $ret = parent::useResult($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       var_dump($ret);
       return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->real_query("SELECT 'Good morning!' AS _msg FROM DUAL");
     $res = $mysqli->use_result();
     var_dump($res->fetch_assoc());
     ?>

The above example will output:


     proxy::useResult(array (
       0 => NULL,
     ))
     proxy::useResult returns NULL
     resource(425) of type (Mysqlnd Resultset (internal only - you must not modify it!))
     array(1) {
       ["_msg"]=>
       string(13) "Good morning!"
     }

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqli_use_result'

`mysqli_real_query'


File: manual.info,  Node: apis-php-class.mysqlnduhpreparedstatement,  Next: apis-php-ref.mysqlnd-uh,  Prev: apis-php-class.mysqlnduhconnection,  Up: apis-php-book.mysqlnd-uh

22.9.4.67 The MysqlndUhPreparedStatement class (`MysqlndUhPreparedStatement')
.............................................................................

* Menu:

* apis-php-mysqlnduhpreparedstatement.construct::  `MysqlndUhPreparedStatement::__construct'
* apis-php-mysqlnduhpreparedstatement.execute::  `MysqlndUhPreparedStatement::execute'
* apis-php-mysqlnduhpreparedstatement.prepare::  `MysqlndUhPreparedStatement::prepare'

Copyright 1997-2012 the PHP Documentation Group.

MysqlndUhPreparedStatement MysqlndUhPreparedStatement

Methods

public MysqlndUhPreparedStatement::__construct

public boolMysqlndUhPreparedStatement::execute

mysqlnd_prepared_statementstatement

public boolMysqlndUhPreparedStatement::prepare

mysqlnd_prepared_statementstatement

stringquery


File: manual.info,  Node: apis-php-mysqlnduhpreparedstatement.construct,  Next: apis-php-mysqlnduhpreparedstatement.execute,  Prev: apis-php-class.mysqlnduhpreparedstatement,  Up: apis-php-class.mysqlnduhpreparedstatement

22.9.4.68 `MysqlndUhPreparedStatement::__construct'
...................................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhPreparedStatement::__construct'

     The __construct purpose

*Description*

public MysqlndUhPreparedStatement::__construct

*Warning*:

This function is currently not documented; only its argument list is
available.

*Parameters*

This function has no parameters.

*Return Values*


File: manual.info,  Node: apis-php-mysqlnduhpreparedstatement.execute,  Next: apis-php-mysqlnduhpreparedstatement.prepare,  Prev: apis-php-mysqlnduhpreparedstatement.construct,  Up: apis-php-class.mysqlnduhpreparedstatement

22.9.4.69 `MysqlndUhPreparedStatement::execute'
...............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhPreparedStatement::execute'

     Executes a prepared Query

*Description*

public boolMysqlndUhPreparedStatement::execute

mysqlnd_prepared_statementstatement

Executes a prepared Query.

*Parameters*

  1. statement

     Mysqlnd prepared statement handle. Do not modify! Resource of type
     `Mysqlnd Prepared Statement (internal only - you must not modify
     it!)'.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class stmt_proxy extends MysqlndUhPreparedStatement {
      public function execute($res) {
       printf("%s(", __METHOD__);
       var_dump($res);
       printf(")\n");
       $ret = parent::execute($res);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       var_dump($ret);
       return $ret;
      }
     }
     mysqlnd_uh_set_statement_proxy(new stmt_proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $stmt = $mysqli->prepare("SELECT 'Labskaus' AS _msg FROM DUAL");
     $stmt->execute();
     $msg = NULL;
     $stmt->bind_result($msg);
     $stmt->fetch();
     var_dump($msg);
     ?>

The above example will output:


     stmt_proxy::execute(resource(256) of type (Mysqlnd Prepared Statement (internal only - you must not modify it!))
     )
     stmt_proxy::execute returns true
     bool(true)
     string(8) "Labskaus"

*See Also*

*Note `mysqlnd_uh_set_statement_proxy':
apis-php-function.mysqlnd-uh-set-statement-proxy.

`mysqli_stmt_execute'


File: manual.info,  Node: apis-php-mysqlnduhpreparedstatement.prepare,  Prev: apis-php-mysqlnduhpreparedstatement.execute,  Up: apis-php-class.mysqlnduhpreparedstatement

22.9.4.70 `MysqlndUhPreparedStatement::prepare'
...............................................

Copyright 1997-2012 the PHP Documentation Group.

   * `MysqlndUhPreparedStatement::prepare'

     Prepare an SQL statement for execution

*Description*

public boolMysqlndUhPreparedStatement::prepare

mysqlnd_prepared_statementstatement

stringquery

Prepare an SQL statement for execution.

*Parameters*

  1. statement

     Mysqlnd prepared statement handle. Do not modify! Resource of type
     `Mysqlnd Prepared Statement (internal only - you must not modify
     it!)'.

  2. query

     The query to be prepared.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     class stmt_proxy extends MysqlndUhPreparedStatement {
      public function prepare($res, $query) {
       printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
       $query = "SELECT 'No more you-know-what-I-mean for lunch, please' AS _msg FROM DUAL";
       $ret = parent::prepare($res, $query);
       printf("%s returns %s\n", __METHOD__, var_export($ret, true));
       var_dump($ret);
       return $ret;
      }
     }
     mysqlnd_uh_set_statement_proxy(new stmt_proxy());

     $mysqli = new mysqli("localhost", "root", "", "test");
     $stmt = $mysqli->prepare("SELECT 'Labskaus' AS _msg FROM DUAL");
     $stmt->execute();
     $msg = NULL;
     $stmt->bind_result($msg);
     $stmt->fetch();
     var_dump($msg);
     ?>

The above example will output:


     stmt_proxy::prepare(array (
       0 => NULL,
       1 => 'SELECT \'Labskaus\' AS _msg FROM DUAL',
     ))
     stmt_proxy::prepare returns true
     bool(true)
     string(46) "No more you-know-what-I-mean for lunch, please"

*See Also*

*Note `mysqlnd_uh_set_statement_proxy':
apis-php-function.mysqlnd-uh-set-statement-proxy.

`mysqli_stmt_prepare'

`mysqli_prepare'


File: manual.info,  Node: apis-php-ref.mysqlnd-uh,  Next: apis-php-mysqlnd-uh.changes,  Prev: apis-php-class.mysqlnduhpreparedstatement,  Up: apis-php-book.mysqlnd-uh

22.9.4.71 Mysqlnd_uh Functions
..............................

* Menu:

* apis-php-function.mysqlnd-uh-convert-to-mysqlnd::  `mysqlnd_uh_convert_to_mysqlnd'
* apis-php-function.mysqlnd-uh-set-connection-proxy::  `mysqlnd_uh_set_connection_proxy'
* apis-php-function.mysqlnd-uh-set-statement-proxy::  `mysqlnd_uh_set_statement_proxy'

Copyright 1997-2012 the PHP Documentation Group.


File: manual.info,  Node: apis-php-function.mysqlnd-uh-convert-to-mysqlnd,  Next: apis-php-function.mysqlnd-uh-set-connection-proxy,  Prev: apis-php-ref.mysqlnd-uh,  Up: apis-php-ref.mysqlnd-uh

22.9.4.72 `mysqlnd_uh_convert_to_mysqlnd'
.........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_uh_convert_to_mysqlnd'

     Converts a MySQL connection handle into a mysqlnd connection handle

*Description*

resource mysqlnd_uh_convert_to_mysqlnd

mysqlimysql_connection

Converts a MySQL connection handle into a mysqlnd connection handle.
After conversion you can execute mysqlnd library calls on the
connection handle. This can be used to access mysqlnd functionality not
made available through user space API calls.

The function can be disabled with `mysqlnd_uh.enable'.  If
`mysqlnd_uh.enable' is set to

FALSE

the function will not install the proxy and always return

TRUE

. Additionally, an error of the type `E_WARNING' may be emitted. The
error message may read like `PHP Warning:
mysqlnd_uh_convert_to_mysqlnd(): (Mysqlnd User Handler) The plugin has
been disabled by setting the configuration parameter mysqlnd_uh.enable
= false. You are not allowed to call this function [...]'.

*Parameters*

  1. MySQL connection handle

     A MySQL connection handle of type mysql, mysqli or PDO_MySQL.

*Return Values*

A mysqlnd connection handle.

*Changelog*

Changelog information for this function

Version                              Description
5.4.0                                The mysql_connection parameter can
                                     now be of type `mysql',
                                     `PDO_MySQL', or `mysqli'. Before,
                                     only the `mysqli' type was allowed.

*Examples*


     <?php
     /* PDO user API gives no access to connection thread id */
     $mysql_connection = new PDO("mysql:host=localhost;dbname=test", "root", "");

     /* Convert PDO MySQL handle to mysqlnd handle */
     $mysqlnd = mysqlnd_uh_convert_to_mysqlnd($mysql_connection);

     /* Create Proxy to call mysqlnd connection class methods */
     $obj = new MySQLndUHConnection();
     /* Call mysqlnd_conn::get_thread_id */
     var_dump($obj->getThreadId($mysqlnd));

     /* Use SQL to fetch connection thread id */
     var_dump($mysql_connection->query("SELECT CONNECTION_ID()")->fetchAll());
     ?>

The above example will output:


     int(27054)
     array(1) {
       [0]=>
       array(2) {
         ["CONNECTION_ID()"]=>
         string(5) "27054"
         [0]=>
         string(5) "27054"
       }
     }

*See Also*

`mysqlnd_uh.enable'


File: manual.info,  Node: apis-php-function.mysqlnd-uh-set-connection-proxy,  Next: apis-php-function.mysqlnd-uh-set-statement-proxy,  Prev: apis-php-function.mysqlnd-uh-convert-to-mysqlnd,  Up: apis-php-ref.mysqlnd-uh

22.9.4.73 `mysqlnd_uh_set_connection_proxy'
...........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_uh_set_connection_proxy'

     Installs a proxy for mysqlnd connections

*Description*

boolmysqlnd_uh_set_connection_proxy

MysqlndUhConnectionconnection_proxy

mysqlimysqli_connection

Installs a proxy object to hook mysqlnd's connection objects methods.
Once installed, the proxy will be used for all MySQL connections opened
with mysqli, mysql or See section "apis-php-ref.pdo-mysql" in the
online manual, assuming that the listed extensions are compiled to use
the See section "apis-php-mysqli" in the online manual library.

The function can be disabled with `mysqlnd_uh.enable'.  If
`mysqlnd_uh.enable' is set to

FALSE

the function will not install the proxy and always return

TRUE

. Additionally, an error of the type `E_WARNING' may be emitted. The
error message may read like `PHP Warning:
mysqlnd_uh_set_connection_proxy(): (Mysqlnd User Handler) The plugin
has been disabled by setting the configuration parameter
mysqlnd_uh.enable = false. The proxy has not been installed [...]'.

*Parameters*

  1. connection_proxy

     A proxy object of type MysqlndUhConnection.

  2. mysqli_connection

     Object of type `mysqli'. If given, the proxy will be set for this
     particular connection only.

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*Examples*


     <?php
     $mysqli = new mysqli("localhost", "root", "", "test");
     $mysqli->query("SELECT 'No proxy installed, yet'");

     class proxy extends MysqlndUhConnection {
      public function query($res, $query) {
        printf("%s(%s)\n", __METHOD__, var_export(func_get_args(), true));
        $ret = parent::query($res, $query);
        printf("%s returns %s\n", __METHOD__, var_export($ret, true));
        return $ret;
      }
     }
     mysqlnd_uh_set_connection_proxy(new proxy());

     $mysqli->query("SELECT 'mysqlnd rocks!'");

     $mysql = mysql_connect("localhost", "root", "", "test");
     mysql_query("SELECT 'Ahoy Andrey!'", $mysql);

     $pdo = new PDO("mysql:host=localhost;dbname=test", "root", "");
     $pdo->query("SELECT 'Moin Johannes!'");
     ?>

The above example will output:


     proxy::query(array (
       0 => NULL,
       1 => 'SELECT \'mysqlnd rocks!\'',
     ))
     proxy::query returns true
     proxy::query(array (
       0 => NULL,
       1 => 'SELECT \'Ahoy Andrey!\'',
     ))
     proxy::query returns true
     proxy::query(array (
       0 => NULL,
       1 => 'SELECT \'Moin Johannes!\'',
     ))
     proxy::query returns true

*See Also*

*Note `mysqlnd_uh_set_statement_proxy':
apis-php-function.mysqlnd-uh-set-statement-proxy.

`mysqlnd_uh.enable'


File: manual.info,  Node: apis-php-function.mysqlnd-uh-set-statement-proxy,  Prev: apis-php-function.mysqlnd-uh-set-connection-proxy,  Up: apis-php-ref.mysqlnd-uh

22.9.4.74 `mysqlnd_uh_set_statement_proxy'
..........................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_uh_set_statement_proxy'

     Installs a proxy for mysqlnd statements

*Description*

boolmysqlnd_uh_set_statement_proxy

MysqlndUhStatementstatement_proxy

Installs a proxy for mysqlnd statements. The proxy object will be used
for all mysqlnd prepared statement objects, regardless which PHP MySQL
extension (mysqli, mysql, See section "apis-php-ref.pdo-mysql" in the
online manual) has created them as long as the extension is compiled to
use the See section "apis-php-mysqli" in the online manual library.

The function can be disabled with `mysqlnd_uh.enable'.  If
`mysqlnd_uh.enable' is set to

FALSE

the function will not install the proxy and always return

TRUE

. Additionally, an error of the type `E_WARNING' may be emitted. The
error message may read like `PHP Warning:
mysqlnd_uh_set_statement_proxy(): (Mysqlnd User Handler) The plugin has
been disabled by setting the configuration parameter mysqlnd_uh.enable
= false. The proxy has not been installed [...]'.

*Parameters*

  1. statement_proxy

     The mysqlnd statement proxy object of type `MysqlndUhStatement'

*Return Values*

Returns

TRUE

on success. Otherwise, returns

FALSE

*See Also*

*Note `mysqlnd_uh_set_connection_proxy':
apis-php-function.mysqlnd-uh-set-connection-proxy.

`mysqlnd_uh.enable'


File: manual.info,  Node: apis-php-mysqlnd-uh.changes,  Prev: apis-php-ref.mysqlnd-uh,  Up: apis-php-book.mysqlnd-uh

22.9.4.75 Change History
........................

* Menu:

* apis-php-mysqlnd-uh.changes-one-o::  PECL/mysqlnd_uh 1.0 series

Copyright 1997-2012 the PHP Documentation Group.

The Change History lists major changes users need to be aware if
upgrading from one version to another. It is a high level summary of
selected changes that may impact applications or might even break
backwards compatibility. See also the `CHANGES' file contained in the
source for additional changelog information. The commit history is also
available.


File: manual.info,  Node: apis-php-mysqlnd-uh.changes-one-o,  Prev: apis-php-mysqlnd-uh.changes,  Up: apis-php-mysqlnd-uh.changes

22.9.4.76 PECL/mysqlnd_uh 1.0 series
....................................

Copyright 1997-2012 the PHP Documentation Group.

1.0.1-alpha

   * Release date: TBD

   * Motto/theme: bug fix release

Feature changes

   * Support of PHP 5.4.0 or later.

   * BC break: *Note `MysqlndUhConnection::changeUser':
     apis-php-mysqlnduhconnection.changeuser. requires additional
     `passwd_len' parameter.

   * BC break: MYSQLND_UH_VERSION_STR renamed to MYSQLND_UH_VERSION.
     MYSQLND_UH_VERSION renamed to MYSQLND_UH_VERSION_ID.

   * BC break: `mysqlnd_uh.enabled' configuration setting renamed to
     `mysqlnd_uh.enable'.

1.0.0-alpha

   * Release date: 08/2010

   * Motto/theme: Initial release


File: manual.info,  Node: apis-php-book.mysqlnd-mux,  Next: apis-php-book.mysqlnd-memcache,  Prev: apis-php-book.mysqlnd-uh,  Up: apis-php

22.9.5 Mysqlnd connection multiplexing plugin (`mysqlnd_mux')
-------------------------------------------------------------

* Menu:

* apis-php-mysqlnd-mux.key-features::  Key Features
* apis-php-mysqlnd-mux.limitations::  Limitations
* apis-php-mysqlnd-mux.name::    About the name mysqlnd_mux
* apis-php-mysqlnd-mux.concepts::  Concepts
* apis-php-mysqlnd-mux.setup::   Installing/Configuring
* apis-php-mysqlnd-mux.constants::  Predefined Constants
* apis-php-mysqlnd-mux.changes::  Change History

Copyright 1997-2012 the PHP Documentation Group.

The mysqlnd multiplexing plugin (`mysqlnd_mux') multiplexes MySQL
connections established by all PHP MySQL extensions that use the MySQL
native driver (See section "apis-php-mysqli" in the online manual) for
PHP.

The MySQL native driver for PHP features an internal C API for plugins,
such as the connection multiplexing plugin, which can extend the
functionality of mysqlnd. See the See section "apis-php-mysqli" in the
online manual for additional details about its benefits over the MySQL
Client Library libmysqlclient.

Mysqlnd plugins like `mysqlnd_mux' operate, for the most part,
transparently from a user perspective. The connection multiplexing
plugin supports all PHP applications, and all MySQL PHP extensions. It
does not change existing APIs. Therefore, it can easily be used with
existing PHP applications.

*Note*:

This is a proof-of-concept. All features are at an early stage.  Not
all kinds of queries are handled by the plugin yet. Thus, it cannot be
used in a drop-in fashion at the moment.

Please, do not use this version in production environments.


File: manual.info,  Node: apis-php-mysqlnd-mux.key-features,  Next: apis-php-mysqlnd-mux.limitations,  Prev: apis-php-book.mysqlnd-mux,  Up: apis-php-book.mysqlnd-mux

22.9.5.1 Key Features
.....................

Copyright 1997-2012 the PHP Documentation Group.

The key features of mysqlnd_mux are as follows:

   * Transparent and therefore easy to use:

        * Supports all of the PHP MySQL extensions.

        * Little to no application changes are required, dependent on
          the required usage scenario.

   * Reduces server load and connection establishment latency:

        * Opens less connections to the MySQL server.

        * Less connections to MySQL mean less work for the MySQL
          server. In a client-server environment scaling the server is
          often more difficult than scaling the client. Multiplexing
          helps with horizontal scale-out (scale-by-client).

        * Pooling saves connection time.

        * Multiplexed connection: multiple user handles share the same
          network connection. Once opened, a network connection is
          cached and shared among multiple user handles. There is a 1:n
          relationship between internal network connection and user
          connection handles.

        * Persistent connection: a network connection is kept open at
          the end of the web request, if the PHP deployment model
          allows. Thus, subsequently web requests can reuse a
          previously opened connection.  Like other resources, network
          connections are bound to the scope of a process. Thus, they
          can be reused for all web requests served by a process.


File: manual.info,  Node: apis-php-mysqlnd-mux.limitations,  Next: apis-php-mysqlnd-mux.name,  Prev: apis-php-mysqlnd-mux.key-features,  Up: apis-php-book.mysqlnd-mux

22.9.5.2 Limitations
....................

Copyright 1997-2012 the PHP Documentation Group.

The proof-of-concept does not support unbuffered queries, prepared
statements, and asynchronous queries.

The connection pool is using a combination of the transport method and
hostname as keys. As a consequence, two connections to the same host
using the same transport method (TCP/IP, Unix socket, Windows named
pipe) will be linked to the same pooled connection even if username and
password differ. Be aware of the possible security implications.

The proof-of-concept is transaction agnostic. It does not know about
SQL transactions.

*Note*:

Applications must be aware of the consequences of connection sharing
connections.


File: manual.info,  Node: apis-php-mysqlnd-mux.name,  Next: apis-php-mysqlnd-mux.concepts,  Prev: apis-php-mysqlnd-mux.limitations,  Up: apis-php-book.mysqlnd-mux

22.9.5.3 About the name mysqlnd_mux
...................................

Copyright 1997-2012 the PHP Documentation Group.

The shortcut `mysqlnd_mux' stands for `mysqlnd connection multiplexing
plugin'.


File: manual.info,  Node: apis-php-mysqlnd-mux.concepts,  Next: apis-php-mysqlnd-mux.setup,  Prev: apis-php-mysqlnd-mux.name,  Up: apis-php-book.mysqlnd-mux

22.9.5.4 Concepts
.................

* Menu:

* apis-php-mysqlnd-mux.architecture::  Architecture
* apis-php-mysqlnd-mux.connection_pool::  Connection pool
* apis-php-mysqlnd-mux.sharing_connections::  Sharing connections

Copyright 1997-2012 the PHP Documentation Group.

This explains the architecture and related concepts for this plugin.
Reading and understanding these concepts is required to successfully
use this plugin.


File: manual.info,  Node: apis-php-mysqlnd-mux.architecture,  Next: apis-php-mysqlnd-mux.connection_pool,  Prev: apis-php-mysqlnd-mux.concepts,  Up: apis-php-mysqlnd-mux.concepts

22.9.5.5 Architecture
.....................

Copyright 1997-2012 the PHP Documentation Group.

The mysqlnd connection multiplexing plugin is implemented as a PHP
extension. It is written in C and operates under the hood of PHP.
During the startup of the PHP interpreter, in the module initialization
phase of the PHP engine, it gets registered as a See section
"apis-php-mysqli" in the online manual plugin to replace specific
mysqlnd C methods.

The mysqlnd library uses PHP streams to communicate with the MySQL
server. PHP streams are accessed by the mysqlnd library through its net
module. The mysqlnd connection multiplexing plugin proxies methods of
the mysqlnd library net module to control opening and closing of
network streams.

Upon opening a user connection to MySQL using the appropriate
connection functions of either See section "apis-php-mysqli" in the
online manual, See section "apis-php-ref.pdo-mysql" in the online
manual or See section "apis-php-mysql" in the online manual, the plugin
will search its connection pool for an open network connection. If the
pool contains a network connection to the host specified by the connect
function using the transport method requested (TCP/IP, Unix domain
socket, Windows named pipe), the pooled connection is linked to the
user handle. Otherwise, a new network connection is opened, put into
the poolm and associated with the user connection handle. This way,
multiple user handles can be linked to the same network connection.


File: manual.info,  Node: apis-php-mysqlnd-mux.connection_pool,  Next: apis-php-mysqlnd-mux.sharing_connections,  Prev: apis-php-mysqlnd-mux.architecture,  Up: apis-php-mysqlnd-mux.concepts

22.9.5.6 Connection pool
........................

Copyright 1997-2012 the PHP Documentation Group.

The plugins connection pool is created when PHP initializes its modules
(`MINIT') and free'd when PHP shuts down the modules (`MSHUTDOWN').
This is the same as for persistent MySQL connections.

Depending on the deployment model, the pool is used for the duration of
one or multiple web requests. Network connections are bound to the
lifespan of an operating system level process.  If the PHP process
serves multiple web requests as it is the case for Fast-CGI or threaded
web server deployments, then the pooled connections can be reused over
multiple connections.  Because multiplexing means sharing connections,
it can even happen with a threaded deployment that two threads or two
distinct web requests are linked to one pooled network connections.

A pooled connection is explicitly closed once the last reference to it
is released. An implicit close happens when PHP shuts down its modules.


File: manual.info,  Node: apis-php-mysqlnd-mux.sharing_connections,  Prev: apis-php-mysqlnd-mux.connection_pool,  Up: apis-php-mysqlnd-mux.concepts

22.9.5.7 Sharing connections
............................

Copyright 1997-2012 the PHP Documentation Group.

The PHP mysqlnd connection multiplexing plugin changes the relationship
between a users connection handle and the underlying MySQL connection.
Without the plugin, every MySQL connection belongs to exactly one user
connection at a time. The multiplexing plugin changes. A MySQL
connection is shared among multiple user handles. There no one-to-one
relation if using the plugin.

Sharing pooled connections has an impact on the connection state. State
changing operations from multiple user handles pointing to one MySQL
connection are not isolated from each other. If, for example, a session
variable is set through one user connection handle, the session
variable becomes visible to all other user handles that reference the
same underlying MySQL connection.

This is similar in concept to connection state related phenomens
described for the PHP mysqlnd replication and load balancing plugin.
Please, check the *Note PECL/mysqlnd_ms documentation:
apis-php-book.mysqlnd-ms. for more details on the state of a connection.

The proof-of-concept takes no measures to isolate multiplexed
connections from each other.


File: manual.info,  Node: apis-php-mysqlnd-mux.setup,  Next: apis-php-mysqlnd-mux.constants,  Prev: apis-php-mysqlnd-mux.concepts,  Up: apis-php-book.mysqlnd-mux

22.9.5.8 Installing/Configuring
...............................

* Menu:

* apis-php-mysqlnd-mux.requirements::  Requirements
* apis-php-mysqlnd-mux.installation::  Installation
* apis-php-mysqlnd-mux.configuration::  Runtime Configuration

Copyright 1997-2012 the PHP Documentation Group.


File: manual.info,  Node: apis-php-mysqlnd-mux.requirements,  Next: apis-php-mysqlnd-mux.installation,  Prev: apis-php-mysqlnd-mux.setup,  Up: apis-php-mysqlnd-mux.setup

22.9.5.9 Requirements
.....................

Copyright 1997-2012 the PHP Documentation Group.

`PHP 5.5.0' or newer. Some advanced functionality requires `PHP 5.5.0'
or newer.

The `mysqlnd_mux' replication and load balancing plugin supports all
PHP applications and all available PHP MySQL extensions (mysqli, mysql,
See section "apis-php-ref.pdo-mysql" in the online manual). The PHP
MySQL extension must be configured to use See section "apis-php-mysqli"
in the online manual in order to be able to use the `mysqlnd_mux'
plugin for See section "apis-php-mysqli" in the online manual.


File: manual.info,  Node: apis-php-mysqlnd-mux.installation,  Next: apis-php-mysqlnd-mux.configuration,  Prev: apis-php-mysqlnd-mux.requirements,  Up: apis-php-mysqlnd-mux.setup

22.9.5.10 Installation
......................

Copyright 1997-2012 the PHP Documentation Group.

Information for installing this PECL extension may be found in the
manual chapter titled Installation of PECL extensions
(http://www.php.net/install.pecl). Additional information such as new
releases, downloads, source files, maintainer information, and a
CHANGELOG, can be located here: http://pecl.php.net/package/mysqlnd_mux
(http://pecl.php.net/package/mysqlnd_mux)


File: manual.info,  Node: apis-php-mysqlnd-mux.configuration,  Prev: apis-php-mysqlnd-mux.installation,  Up: apis-php-mysqlnd-mux.setup

22.9.5.11 Runtime Configuration
...............................

Copyright 1997-2012 the PHP Documentation Group.

The behaviour of these functions is affected by settings in `php.ini'.

*Mysqlnd_mux Configure Options*

Name               Default            Changeable         Changelog
mysqlnd_mux.enable 0                  PHP_INI_SYSTEM     

Here's a short explanation of the configuration directives.

  1. mysqlnd_mux.enable integer

     Enables or disables the plugin. If disabled, the extension will
     not plug into See section "apis-php-mysqli" in the online manual
     to proxy internal See section "apis-php-mysqli" in the online
     manual C API calls.


File: manual.info,  Node: apis-php-mysqlnd-mux.constants,  Next: apis-php-mysqlnd-mux.changes,  Prev: apis-php-mysqlnd-mux.setup,  Up: apis-php-book.mysqlnd-mux

22.9.5.12 Predefined Constants
..............................

Copyright 1997-2012 the PHP Documentation Group.

The constants below are defined by this extension, and will only be
available when the extension has either been compiled into PHP or
dynamically loaded at runtime.

_Other_

The plugins version number can be obtained using

MYSQLND_MUX_VERSION

or

MYSQLND_MUX_VERSION_ID

.

MYSQLND_MUX_VERSION

is the string representation of the numerical version number

MYSQLND_MUX_VERSION_ID

, which is an integer such as 10000. Developers can calculate the
version number as follows.

Unknown PHP API feature.

Version (part)                       Example
Major*10000                          1*10000 = 10000
Minor*100                            0*100 = 0
Patch                                0 = 0
MYSQLND_MUX_VERSION_ID               10000

  1. MYSQLND_MUX_VERSION

     (string)

     Plugin version string, for example, `1.0.0-prototype'.

  2. MYSQLND_MUX_VERSION_ID

     (integer)

     Plugin version number, for example, 10000.


File: manual.info,  Node: apis-php-mysqlnd-mux.changes,  Prev: apis-php-mysqlnd-mux.constants,  Up: apis-php-book.mysqlnd-mux

22.9.5.13 Change History
........................

* Menu:

* apis-php-mysqlnd-mux.changes-one-o::  PECL/mysqlnd_mux 1.0 series

Copyright 1997-2012 the PHP Documentation Group.

This change history is a high level summary of selected changes that
may impact applications and/or break backwards compatibility.

See also the `CHANGES' file in the source distribution for a complete
list of changes.


File: manual.info,  Node: apis-php-mysqlnd-mux.changes-one-o,  Prev: apis-php-mysqlnd-mux.changes,  Up: apis-php-mysqlnd-mux.changes

22.9.5.14 PECL/mysqlnd_mux 1.0 series
.....................................

Copyright 1997-2012 the PHP Documentation Group.

1.0.0-pre-alpha

   * Release date: no package released, initial check-in 09/2012

   * Motto/theme: Proof of concept

Initial check-in. Essentially a demo of the See section
"apis-php-mysqli" in the online manual plugin API.

*Note*:

This is the current development series. All features are at an early
stage. Changes may happen at any time without prior notice. Please, do
not use this version in production environments.

The documentation may not reflect all changes yet.


File: manual.info,  Node: apis-php-book.mysqlnd-memcache,  Next: connector-php,  Prev: apis-php-book.mysqlnd-mux,  Up: apis-php

22.9.6 Mysqlnd Memcache plugin (`mysqlnd_memcache')
---------------------------------------------------

* Menu:

* apis-php-mysqlnd-memcache.key-features::  Key Features
* apis-php-mysqlnd-memcache.limitations::  Limitations
* apis-php-mysqlnd-memcache.name::  On the name
* apis-php-mysqlnd-memcache.quickstart::  Quickstart and Examples
* apis-php-mysqlnd-memcache.setup::  Installing/Configuring
* apis-php-mysqlnd-memcache.constants::  Predefined Constants
* apis-php-ref.mysqlnd-memcache::  Mysqlnd_memcache Functions
* apis-php-mysqlnd-memcache.changes::  Change History

Copyright 1997-2012 the PHP Documentation Group.

The mysqlnd memcache plugin (`mysqlnd_memcache') is an PHP extension
for transparently translating SQL into requests for the MySQL InnoDB
Memcached Daemon Plugin (server plugin). It includes experimental
support for the MySQL Cluster Memcached Daemon. The server plugin
provides access to data stored inside MySQL InnoDB (respectively MySQL
Cluster NDB) tables using the Memcache protocol. This PHP extension,
which supports all PHP MySQL extensions that use See section
"apis-php-mysqli" in the online manual, will identify tables exported
in this way and will translate specific SELECT queries into Memcache
requests.

FIGURE GOES HERE: mysqlnd_memcache data flow

*Note*:

This plugin depends on the MySQL InnoDB Memcached Daemon Plugin.  It is
not provided to be used with a stand-alone Memcached. For a generic
query cache using Memcached look at the *Note mysqlnd query cache
plugin: apis-php-book.mysqlnd-qc. For direct Memcache access look at the
memcache (http://www.php.net/book.memcache) and memcached
(http://www.php.net/book.memcached) extensions.

The MySQL native driver for PHP is a C library that ships together with
PHP as of PHP 5.3.0. It serves as a drop-in replacement for the MySQL
Client Library (libmysqlclient). Using mysqlnd has several advantages:
no extra downloads are required because it's bundled with PHP, it's
under the PHP license, there is lower memory consumption in certain
cases, and it contains new functionality such as asynchronous queries.

The `mysqlnd_mmemcache' operates, for the most part, transparently from
a user perspective. The mysqlnd memcache plugin supports all PHP
applications, and all MySQL PHP extensions.  It does not change
existing APIs. Therefore, it can easily be used with existing PHP
applications.

The MySQL Memcache plugins add key-value style access method for data
stored in InnoDB resp. NDB (MySQL Cluster) SQL tables through the
Memcache protocol. This type of key-value access if often faster than
using SQL.


File: manual.info,  Node: apis-php-mysqlnd-memcache.key-features,  Next: apis-php-mysqlnd-memcache.limitations,  Prev: apis-php-book.mysqlnd-memcache,  Up: apis-php-book.mysqlnd-memcache

22.9.6.1 Key Features
.....................

Copyright 1997-2012 the PHP Documentation Group.

The key features of PECL/mysqlnd_memcache are as follows.

   * Possible performance benefits

        * Client-side: light-weight protocol.

        * Server-side: no SQL parsing, direct access to the storage.

        * Please, run your own benchmarks! Actual performance results
          are highly dependent on setup and hardware used.


File: manual.info,  Node: apis-php-mysqlnd-memcache.limitations,  Next: apis-php-mysqlnd-memcache.name,  Prev: apis-php-mysqlnd-memcache.key-features,  Up: apis-php-book.mysqlnd-memcache

22.9.6.2 Limitations
....................

Copyright 1997-2012 the PHP Documentation Group.

The initial version is not binary safe. Due to the way the MySQL
Memcache plugins works there are restrictions related to separators.

Prepared statements and asynchronous queries are not supported.  Result
set meta data support is limited.

The mapping information for tables accessible via Memcache is not
cached in the plugin between requests but fetched from the MySQL server
each time a MySQL connection is associated with a Memcache connection.
See *Note `mysqlnd_memcache_set':
apis-php-function.mysqlnd-memcache-set.  for details.


File: manual.info,  Node: apis-php-mysqlnd-memcache.name,  Next: apis-php-mysqlnd-memcache.quickstart,  Prev: apis-php-mysqlnd-memcache.limitations,  Up: apis-php-book.mysqlnd-memcache

22.9.6.3 On the name
....................

Copyright 1997-2012 the PHP Documentation Group.

The shortcut `mysqlnd_memcache' stands for `mysqlnd memcache plugin'.
Memcache refers to support of the MySQL Memcache plugins for InnoDB and
NDB (MySQL Cluster). The plugin is not related to the Memcached cache
server.


File: manual.info,  Node: apis-php-mysqlnd-memcache.quickstart,  Next: apis-php-mysqlnd-memcache.setup,  Prev: apis-php-mysqlnd-memcache.name,  Up: apis-php-book.mysqlnd-memcache

22.9.6.4 Quickstart and Examples
................................

* Menu:

* apis-php-mysqlnd-memcache.quickstart.configuration::  Setup
* apis-php-mysqlnd-memcache.quickstart.usage::  Usage

Copyright 1997-2012 the PHP Documentation Group.

The mysqlnd memcache plugin is easy to use. This quickstart will demo
typical use-cases, and provide practical advice on getting started.

It is strongly recommended to read the reference sections in addition
to the quickstart. The quickstart tries to avoid discussing theoretical
concepts and limitations. Instead, it will link to the reference
sections. It is safe to begin with the quickstart. However, before
using the plugin in mission critical environments we urge you to read
additionally the background information from the reference sections.


File: manual.info,  Node: apis-php-mysqlnd-memcache.quickstart.configuration,  Next: apis-php-mysqlnd-memcache.quickstart.usage,  Prev: apis-php-mysqlnd-memcache.quickstart,  Up: apis-php-mysqlnd-memcache.quickstart

22.9.6.5 Setup
..............

Copyright 1997-2012 the PHP Documentation Group.

The plugin is implemented as a PHP extension. See also the *Note
installation instructions: apis-php-mysqlnd-memcache.installation. to
install this extension.

Compile or configure the PHP MySQL extension (API) (mysqli, See section
"apis-php-ref.pdo-mysql" in the online manual, mysql). That extension
must use the See section "apis-php-mysqli" in the online manual library
as because mysqlnd_memcache is a plugin for the mysqlnd library. For
additional information, refer to the mysqlnd_memcache installation
instructions (http://www.php.net/memcached.installation).

Then, load this extension into PHP and activate the plugin in the PHP
configuration file using the PHP configuration directive named
mysqlnd_memcache.enable.


     ; On Windows the filename is php_mysqnd_memcache.dll
     ; Load the extension
     extension=mysqlnd_memcache.so
     ; Enable it
     mysqlnd_memcache.enable=1

Follow the instructions given in the MySQL Reference Manual on
installing the Memcache plugins
(http://dev.mysql.com/doc/en/ha-memcached.html) for the MySQL server.
Activate the plugins and configure Memcache access for SQL tables.

The examples in this quickguide assume that the following table exists,
and that Memcache is configured with access to it.


     CREATE TABLE test(
       id CHAR(16),
       f1 VARCHAR(255),
       f2 VARCHAR(255),
       f3 VARCHAR(255),
       flags INT NOT NULL,
       cas_column INT,
       expire_time_column INT,
       PRIMARY KEY(id)
       ) ENGINE=InnoDB;

     INSERT INTO test (id, f1, f2, f3) VALUES (1, 'Hello', 'World', '!');
     INSERT INTO test (id, f1, f2, f3) VALUES (2, 'Lady', 'and', 'the tramp');

     INSERT INTO innodb_memcache.containers(
       name, db_schema, db_table, key_columns, value_columns,
       flags, cas_column, expire_time_column, unique_idx_name_on_key)
     VALUES (
       'plugin_test', 'test', 'test', 'id', 'f1,f2,f3',
       'flags', 'cas_column', 'expire_time_column', 'PRIMARY KEY');


File: manual.info,  Node: apis-php-mysqlnd-memcache.quickstart.usage,  Prev: apis-php-mysqlnd-memcache.quickstart.configuration,  Up: apis-php-mysqlnd-memcache.quickstart

22.9.6.6 Usage
..............

Copyright 1997-2012 the PHP Documentation Group.

After associating a MySQL connection with a Memcache connection using
`mysqnd_memcache_set' (http://www.php.net/mysqnd_memcache_set) the
plugin attempts to transparently replace SQL `SELECT' statements by a
memcache access. For that purpose the plugin monitors all SQL
statements executed and tries to match the statement string against

MYSQLND_MEMCACHE_DEFAULT_REGEXP

. In case of a match, the mysqlnd memcache plugin checks whether the
`SELECT' is accessing only columns of a mapped table and the `WHERE'
clause is limited to a single key lookup.

In case of the example SQL table, the plugin will use the Memcache
interface of the MySQL server to fetch results for a SQL query like
`SELECT f1, f2, f3 WHERE id = n'.


     <?php
     $mysqli = new mysqli("host", "user", "passwd", "database");
     $memc = new Memcached();
     $memc->addServer("host", 11211);
     mysqlnd_memcache_set($mysqli, $memc);

     /*
        This is a query which queries table test using id as key in the WHERE part
        and is accessing fields f1, f2 and f3. Therefore, mysqlnd_memcache
        will intercept it and route it via memcache.
     */
     $result = $mysqli->query("SELECT f1, f2, f3 FROM test WHERE id = 1");
     while ($row = $result->fetch_row()) {
         print_r($row);
     }

     /*
        This is a query which queries table test but using f1 in the WHERE clause.
        Therefore, mysqlnd_memcache can't intercept it. This will be executed
        using the MySQL protocol
     */
     $mysqli->query("SELECT id FROM test WHERE f1 = 'Lady'");
     while ($row = $result->fetch_row()) {
         print_r($row);
     }
     ?>

The above example will output:


     array(
         [f1] => Hello
         [f2] => World
         [f3] => !
     )
     array(
         [id] => 2
     )


File: manual.info,  Node: apis-php-mysqlnd-memcache.setup,  Next: apis-php-mysqlnd-memcache.constants,  Prev: apis-php-mysqlnd-memcache.quickstart,  Up: apis-php-book.mysqlnd-memcache

22.9.6.7 Installing/Configuring
...............................

* Menu:

* apis-php-mysqlnd-memcache.requirements::  Requirements
* apis-php-mysqlnd-memcache.installation::  Installation
* apis-php-mysqlnd-memcache.configuration::  Runtime Configuration

Copyright 1997-2012 the PHP Documentation Group.


File: manual.info,  Node: apis-php-mysqlnd-memcache.requirements,  Next: apis-php-mysqlnd-memcache.installation,  Prev: apis-php-mysqlnd-memcache.setup,  Up: apis-php-mysqlnd-memcache.setup

22.9.6.8 Requirements
.....................

Copyright 1997-2012 the PHP Documentation Group.

PHP: this extension requires PHP 5.4+, version PHP 5.4.4 or never. The
required PHP extensions are PCRE (http://www.php.net/ref.pcre) (enabled
by default), and the memcached (http://www.php.net/book.memcached)
extension version 2.0.x.

The `mysqlnd_memcache' Memcache plugin supports all PHP applications
and all available PHP MySQL extensions (mysqli, mysql, See section
"apis-php-ref.pdo-mysql" in the online manual). The PHP MySQL extension
must be configured with See section "apis-php-mysqli" in the online
manual support.

For accessing `InnoDB' tables, this PHP extension requires `MySQL
Server 5.6.6' or newer with the InnoDB Memcache Daemon Plugin enabled.

For accessing `MySQL Cluster NDB' tables, this PHP extension requires
`MySQL Cluster 7.2' or newer with the NDB Memcache API nodes enabled.


File: manual.info,  Node: apis-php-mysqlnd-memcache.installation,  Next: apis-php-mysqlnd-memcache.configuration,  Prev: apis-php-mysqlnd-memcache.requirements,  Up: apis-php-mysqlnd-memcache.setup

22.9.6.9 Installation
.....................

Copyright 1997-2012 the PHP Documentation Group.

This PECL (http://pecl.php.net/) extension is not bundled with PHP.

Information for installing this PECL extension may be found in the
manual chapter titled Installation of PECL extensions
(http://www.php.net/install.pecl). Additional information such as new
releases, downloads, source files, maintainer information, and a
CHANGELOG, can be located here:
http://pecl.php.net/package/mysqlnd_memcache
(http://pecl.php.net/package/mysqlnd_memcache)

A DLL for this PECL extension is currently unavailable. See also the
building on Windows (http://www.php.net/install.windows.building)
section.


File: manual.info,  Node: apis-php-mysqlnd-memcache.configuration,  Prev: apis-php-mysqlnd-memcache.installation,  Up: apis-php-mysqlnd-memcache.setup

22.9.6.10 Runtime Configuration
...............................

Copyright 1997-2012 the PHP Documentation Group.

The behaviour of these functions is affected by settings in `php.ini'.

*Mysqlnd_memcache Configure Options*

Name               Default            Changeable         Changelog
mysqlnd_memcache.enable1                  PHP_INI_SYSTEM     Available since
                                                         1.0.0

Here's a short explanation of the configuration directives.

  1. mysqlnd_memcache.enable integer

     Enables or disables the plugin. If disabled, the extension will
     not plug into See section "apis-php-mysqli" in the online manual
     to proxy internal See section "apis-php-mysqli" in the online
     manual C API calls.

     *Note*:

     This option is mainly used by developers to build this extension
     statically into PHP. General users are encouraged to build this
     extension as a shared object, and to unload it completely when it
     is not needed.


File: manual.info,  Node: apis-php-mysqlnd-memcache.constants,  Next: apis-php-ref.mysqlnd-memcache,  Prev: apis-php-mysqlnd-memcache.setup,  Up: apis-php-book.mysqlnd-memcache

22.9.6.11 Predefined Constants
..............................

Copyright 1997-2012 the PHP Documentation Group.

The constants below are defined by this extension, and will only be
available when the extension has either been compiled into PHP or
dynamically loaded at runtime.

_MySQL Memcache Plugin related_

  1. MYSQLND_MEMCACHE_DEFAULT_REGEXP

     (string)

     Default regular expression (PCRE style) used for matching `SELECT'
     statements that will be mapped into a MySQL Memcache Plugin access
     point, if possible.

     It is also possible to use *Note `mysqlnd_memcache_set':
     apis-php-function.mysqlnd-memcache-set, but the default approach
     is using this regular expression for pattern matching.

_Assorted_

The version number of this plugin can be obtained by using

MYSQLND_MEMCACHE_VERSION

or

MYSQLND_MEMCACHE_VERSION_ID

.

MYSQLND_MEMCACHE_VERSION

is the string representation of the numerical version number

MYSQLND_MEMCACHE_VERSION_ID

, which is an integer such as 10000. Developers can calculate the
version number as follows.

Unknown PHP API feature.

Version (part)                       Example
Major*10000                          1*10000 = 10000
Minor*100                            0*100 = 0
Patch                                0 = 0
MYSQLND_MEMCACHE_VERSION_ID          10000

  1. MYSQLND_MEMCACHE_VERSION

     (string)

     Plugin version string, for example, `1.0.0-alpha'.

  2. MYSQLND_MEMCACHE_VERSION_ID

     (integer)

     Plugin version number, for example, 10000.


File: manual.info,  Node: apis-php-ref.mysqlnd-memcache,  Next: apis-php-mysqlnd-memcache.changes,  Prev: apis-php-mysqlnd-memcache.constants,  Up: apis-php-book.mysqlnd-memcache

22.9.6.12 Mysqlnd_memcache Functions
....................................

* Menu:

* apis-php-function.mysqlnd-memcache-get-config::  `mysqlnd_memcache_get_config'
* apis-php-function.mysqlnd-memcache-set::  `mysqlnd_memcache_set'

Copyright 1997-2012 the PHP Documentation Group.


File: manual.info,  Node: apis-php-function.mysqlnd-memcache-get-config,  Next: apis-php-function.mysqlnd-memcache-set,  Prev: apis-php-ref.mysqlnd-memcache,  Up: apis-php-ref.mysqlnd-memcache

22.9.6.13 `mysqlnd_memcache_get_config'
.......................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_memcache_get_config'

     Returns information about the plugin configuration

*Description*

array mysqlnd_memcache_get_config

mixedconnection

This function returns an array of all mysqlnd_memcache related
configuration information that is attached to the MySQL connection.
This includes MySQL, the Memcache object provided via *Note
`mysqlnd_memcache_set': apis-php-function.mysqlnd-memcache-set, and the
table mapping configuration that was automatically collected from the
MySQL Server.

*Parameters*

  1. connection

     A handle to a MySQL Server using one of the MySQL API extensions
     for PHP, which are See section "apis-php-ref.pdo-mysql" in the
     online manual, See section "apis-php-mysqli" in the online manual
     or See section "apis-php-mysql" in the online manual.

*Return Values*

An array of mysqlnd_memcache configuration information on success,
otherwise

FALSE

.

The returned array has these elements:

**Note `mysqlnd_memcache_get_config':
apis-php-function.mysqlnd-memcache-get-config.  array structure*

Array Key                            Description
memcached                            Instance of Memcached associated to
                                     this MySQL connection by *Note
                                     `mysqlnd_memcache_set':
                                     apis-php-function.mysqlnd-memcache-set.
                                     You can use this to change settings
                                     of the memcache connection, or
                                     directly by querying the server on
                                     this connection.
pattern                              The PCRE regular expression used to
                                     match the SQL query sent to the
                                     server. Queries matching this
                                     pattern will be further analyzed to
                                     decide whether the query can be
                                     intercepted and sent via the
                                     memcache interface or whether the
                                     query is sent using the general
                                     MySQL protocol to the server. The
                                     pattern is either the default
                                     pattern
                                     (`MYSQLND_MEMCACHE_DEFAULT_REGEXP')
                                     or it is set via *Note
                                     `mysqlnd_memcache_set':
                                     apis-php-function.mysqlnd-memcache-set.
mappings                             An associative array with a list of
                                     all configured containers as they
                                     were discovered by this plugin. The
                                     key for these elements is the name
                                     of the container in the MySQL
                                     configuration. The value is
                                     described below. The contents of
                                     this field is created by querying
                                     the MySQL Server during association
                                     to MySQL and a memcache connection
                                     using *Note `mysqlnd_memcache_set':
                                     apis-php-function.mysqlnd-memcache-set.
mapping_query                        An SQL query used during *Note
                                     `mysqlnd_memcache_set':
                                     apis-php-function.mysqlnd-memcache-set.
                                     to identify the available
                                     containers and mappings. The result
                                     of that query is provided in the
                                     mappings element.

*Mapping entry structure*

Array Key                            Description
prefix                               A prefix used while accessing data
                                     via memcache. With the MySQL InnoDB
                                     Memcache Deamon plugin, this
                                     usually begins with @@ and ends
                                     with a configurable separator. This
                                     prefix is placed in front of the
                                     key value while using the memcache
                                     protocol.
schema_name                          Name of the schema (database) which
                                     contains the table being accessed.
table_name                           Name of the table which contains
                                     the data accessible via memcache
                                     protocol.
id_field_name                        Name of the database field (column)
                                     with the id used as key when
                                     accessing the table via memcache.
                                     Often this is the database field
                                     having a primary key.
separator                            The separator used to split the
                                     different field values. This is
                                     needed as memcache only provides
                                     access to a single value while
                                     MySQL can map multiple columns to
                                     this value.
                                     
                                     *Note*:
                                     
                                     The separator, which can be set in
                                     the MySQL Server configuration,
                                     should not be part of any value
                                     retrieved via memcache because
                                     proper mapping can't be guaranteed.
fields                               An array with the name of all
                                     fields available for this mapping.

*Examples*


     <?php
     $mysqli = new mysqli("host", "user", "passwd", "database");
     $memc = new Memcached();
     $memc->addServer("host", 11211);
     mysqlnd_memcache_set($mysqli, $memc);

     var_dump(mysqlnd_memcache_get_config($mysqli));
     ?>

The above example will output:


     array(4) {
       ["memcached"]=>
       object(Memcached)#2 (0) {
       }
       ["pattern"]=>
       string(125) "/^\s*SELECT\s*(.+?)\s*FROM\s*`?([a-z0-9_]+)`?\s*WHERE\s*`?([a-z0-9_]+)`?\s*=\s*(?(?=["'])["']([^"']*)["']|([0-9e\.]*))\s*$/is"
       ["mappings"]=>
       array(1) {
         ["mymem_test"]=>
         array(6) {
           ["prefix"]=>
           string(13) "@@mymem_test."
           ["schema_name"]=>
           string(4) "test"
           ["table_name"]=>
           string(10) "mymem_test"
           ["id_field_name"]=>
           string(2) "id"
           ["separator"]=>
           string(1) "|"
           ["fields"]=>
           array(3) {
             [0]=>
             string(2) "f1"
             [1]=>
             string(2) "f2"
             [2]=>
             string(2) "f3"
           }
         }
       }
       ["mapping_query"]=>
       string(209) "    SELECT c.name,
                               CONCAT('@@', c.name, (SELECT value FROM innodb_memcache.config_options WHERE name = 'table_map_delimiter')) AS key_prefix,
                               c.db_schema,
                               c.db_table,
                               c.key_columns,
                               c.value_columns,
                               (SELECT value FROM innodb_memcache.config_options WHERE name = 'separator') AS sep
                          FROM innodb_memcache.containers c"
     }

*See Also*

*Note `mysqlnd_memcache_set': apis-php-function.mysqlnd-memcache-set.


File: manual.info,  Node: apis-php-function.mysqlnd-memcache-set,  Prev: apis-php-function.mysqlnd-memcache-get-config,  Up: apis-php-ref.mysqlnd-memcache

22.9.6.14 `mysqlnd_memcache_set'
................................

Copyright 1997-2012 the PHP Documentation Group.

   * `mysqlnd_memcache_set'

     Associate a MySQL connection with a Memcache connection

*Description*

bool mysqlnd_memcache_set

mixedmysql_connection

Memcachedmemcache_connection

stringpattern

callbackcallback

Associate mysql_connection with memcache_connection using pattern as a
PCRE regular expression, and callback as a notification callback or to
unset the association of mysql_connection.

While associating a MySQL connection with a Memcache connection, this
function will query the MySQL Server for its configuration.  It will
automatically detect whether the server is configured to use the InnoDB
Memcache Daemon Plugin or MySQL Cluster NDB Memcache support. It will
also query the server to automatically identify exported tables and
other configuration options. The results of this automatic
configuration can be retrieved using *Note
`mysqlnd_memcache_get_config':
apis-php-function.mysqlnd-memcache-get-config.

*Parameters*

  1. mysql_connection

     A handle to a MySQL Server using one of the MySQL API extensions
     for PHP, which are See section "apis-php-ref.pdo-mysql" in the
     online manual, See section "apis-php-mysqli" in the online manual
     or See section "apis-php-mysql" in the online manual.

  2. memcache_connection

     A Memcached (http://www.php.net/book.memcached) instance with a
     connection to the MySQL Memcache Daemon plugin. If this parameter
     is omitted, then mysql_connection will be unassociated from any
     memcache connection. And if a previous association exists, then it
     will be replaced.

  3. pattern

     A regular expression in Perl Compatible Regular Expression
     (http://www.php.net/book.pcre) syntax used to identify potential
     Memcache-queries. The query should have three sub patterns. The
     first subpattern contains the requested field list, the second the
     name of the ID column from the query and the third the requested
     value. If this parameter is omitted or os set to

     NULL

     , then a default pattern will be used.

  4. callback

     A callback which will be used whenever a query is being sent to
     MySQL. The callback will receive a single boolean parameter
     telling if a query was sent via Memcache.

*Return Values*

TRUE

if the association or disassociation is successful, otherwise

FALSE

if there is an error.

*Examples*


     <?php
     $mysqli = new mysqli("host", "user", "passwd", "database");
     $memc = new Memcached();
     $memc->addServer("host", 11211);
     mysqlnd_memcache_set($mysqli, $memc, NULL, 'var_dump');

     /* This query will be intercepted and executed via Memcache protocol */
     echo "Sending query for id via Memcache: ";
     $mysqli->query("SELECT f1, f2, f3 FROM test WHERE id = 1");

     /* f1 is not configured as valid key field, this won't be sent via Memcache */
     echo "Sending query for f1 via Memcache: ";
     $mysqli->query("SELECT id FROM test WHERE f1 = 1");

     mysqlnd_memcache_set($mysqli);

     /* Now the regular MySQL protocol will be used */
     echo "var_dump won't be invoked: ";
     $mysqli->query("SELECT f1, f2, f3 WHERE id = 1");

     ?>

The above example will output:


     Sending query for id via Memcache: bool(true)
     Sending query for f1 via Memcache: bool(false)
     var_dump won't be invoked:

*See Also*

*Note `mysqlnd_memcache_get_config':
apis-php-function.mysqlnd-memcache-get-config.


File: manual.info,  Node: apis-php-mysqlnd-memcache.changes,  Prev: apis-php-ref.mysqlnd-memcache,  Up: apis-php-book.mysqlnd-memcache

22.9.6.15 Change History
........................

* Menu:

* apis-php-mysqlnd-memcache.changes-one-o::  PECL/mysqlnd_memcache 1.0 series

Copyright 1997-2012 the PHP Documentation Group.

This change history is a high level summary of selected changes that
may impact applications and/or break backwards compatibility.

See also the `CHANGES' file in the source distribution for a complete
list of changes.


File: manual.info,  Node: apis-php-mysqlnd-memcache.changes-one-o,  Prev: apis-php-mysqlnd-memcache.changes,  Up: apis-php-mysqlnd-memcache.changes

22.9.6.16 PECL/mysqlnd_memcache 1.0 series
..........................................

Copyright 1997-2012 the PHP Documentation Group.

1.0.0-alpha

   * Release date: TBD

   * Motto/theme: Basic mapping of SQL SELECT to a MySQL Memcache
     plugin access.

The initial release does map basic SQL SELECT statements to a MySQL
Memcache plugin access. This bares potential performance benefits as
the direct key-value access to MySQL storage using the Memcache
protocol is usually faster than using SQL access.


File: manual.info,  Node: connector-php,  Next: apis-php-problems,  Prev: apis-php-book.mysqlnd-memcache,  Up: apis-php

22.9.7 Connector/PHP
--------------------

This documentation, and other publications, sometimes uses the term
`Connector/PHP'. This term refers to the full set of MySQL related
functionality in PHP, which includes the three APIs that are described
above, along with the See section "apis-php-mysqli" in the online
manual core library and all of its plugins.


File: manual.info,  Node: apis-php-problems,  Next: php-mysql-mysqli,  Prev: connector-php,  Up: apis-php

22.9.8 Common Problems with MySQL and PHP
-----------------------------------------

   * `Error: Maximum Execution Time Exceeded': This is a PHP limit; go
     into the `php.ini' file and set the maximum execution time up from
     30 seconds to something higher, as needed. It is also not a bad
     idea to double the RAM allowed per script to 16MB instead of 8MB.

   * `Fatal error: Call to unsupported or undefined function
     mysql_connect() in ...': This means that your PHP version isn't
     compiled with MySQL support. You can either compile a dynamic
     MySQL module and load it into PHP or recompile PHP with built-in
     MySQL support. This process is described in detail in the PHP
     manual.

   * `Error: Undefined reference to 'uncompress'': This means that the
     client library is compiled with support for a compressed
     client/server protocol. The fix is to add `-lz' last when linking
     with `-lmysqlclient'.

   * `Error: Client does not support authentication protocol': This is
     most often encountered when trying to use the older `mysql'
     extension with MySQL 4.1.1 and later. Possible solutions are:
     downgrade to MySQL 4.0; switch to PHP 5 and the newer `mysqli'
     extension; or configure the MySQL server with the `old_passwords'
     system variable set to 1. (See *Note old-client::, for more
     information.)


File: manual.info,  Node: php-mysql-mysqli,  Prev: apis-php-problems,  Up: apis-php

22.9.9 Enabling Both `mysql' and `mysqli' in PHP
------------------------------------------------

If you're experiencing problems with enabling both the `mysql' and the
`mysqli' extension when building PHP on Linux yourself, you should try
the following procedure.

  1. Configure PHP like this:

          ./configure --with-mysqli=/usr/bin/mysql_config --with-mysql=/usr

  2. Edit the `Makefile' and search for a line that starts with
     `EXTRA_LIBS'. It might look like this (all on one line):

          EXTRA_LIBS = -lcrypt -lcrypt -lmysqlclient -lz -lresolv -lm -ldl -lnsl
          -lxml2 -lz -lm -lxml2 -lz -lm -lmysqlclient -lz -lcrypt -lnsl -lm
          -lxml2 -lz -lm -lcrypt -lxml2 -lz -lm -lcrypt

     Remove all duplicates, so that the line looks like this (all on
     one line):

          EXTRA_LIBS = -lcrypt -lcrypt -lmysqlclient -lz -lresolv -lm -ldl -lnsl
          -lxml2

  3. Build and install PHP:

          make
          make install


File: manual.info,  Node: apis-perl,  Next: apis-python,  Prev: apis-php,  Up: connectors-apis

22.10 MySQL Perl API
====================

The Perl `DBI' module provides a generic interface for database access.
You can write a DBI script that works with many different database
engines without change. To use DBI with MySQL, install the following:

  1. The `DBI' module.

  2. The `DBD::mysql' module. This is the DataBase Driver (DBD) module
     for Perl.

  3. Optionally, the DBD module for any other type of database server
     you want to access.

Perl DBI is the recommended Perl interface. It replaces an older
interface called `mysqlperl', which should be considered obsolete.

These sections contain information about using Perl with MySQL and
writing MySQL applications in Perl:

   * For installation instructions for Perl DBI support, see *Note
     perl-support::.

   * For an example of reading options from option files, see *Note
     multiple-server-clients::.

   * For secure coding tips, see *Note security-guidelines::.

   * For debugging tips, see *Note using-gdb-on-mysqld::.

   * For some Perl-specific environment variables, see *Note
     environment-variables::.

   * For considerations for running on Mac OS X, see *Note
     macosx-installation-server::.

   * For ways to quote string literals, see *Note string-literals::.

DBI information is available at the command line, online, or in printed
form:

   * Once you have the `DBI' and `DBD::mysql' modules installed, you
     can get information about them at the command line with the
     `perldoc' command:

          shell> perldoc DBI
          shell> perldoc DBI::FAQ
          shell> perldoc DBD::mysql

     You can also use `pod2man', `pod2html', and so on to translate this
     information into other formats.

   * For online information about Perl DBI, visit the DBI Web site,
     `http://dbi.perl.org/'. That site hosts a general DBI mailing
     list. Oracle Corporation hosts a list specifically about
     `DBD::mysql'; see *Note mailing-lists::.

   * For printed information, the official DBI book is `Programming the
     Perl DBI' (Alligator Descartes and Tim Bunce, O'Reilly &
     Associates, 2000).  Information about the book is available at the
     DBI Web site, `http://dbi.perl.org/'.

     For information that focuses specifically on using DBI with MySQL,
     see `MySQL and Perl for the Web' (Paul DuBois, New Riders, 2001).
     This book's Web site is `http://www.kitebird.com/mysql-perl/'.


File: manual.info,  Node: apis-python,  Next: apis-ruby,  Prev: apis-perl,  Up: connectors-apis

22.11 MySQL Python API
======================

`MySQLdb' is a third-party driver that provides MySQL support for
Python, compliant with the Python DB API version 2.0. It can be found at
`http://sourceforge.net/projects/mysql-python/'.

The new MySQL Connector/Python component provides an interface to the
same Python API, and is built into the MySQL Server and supported by
Oracle. See *Note connector-python:: for details on the Connector, as
well as coding guidelines for Python applications and sample Python
code.


File: manual.info,  Node: apis-ruby,  Next: apis-tcl,  Prev: apis-python,  Up: connectors-apis

22.12 MySQL Ruby APIs
=====================

* Menu:

* apis-ruby-mysqlruby::          The MySQL/Ruby API
* apis-ruby-rubymysql::          The Ruby/MySQL API

Two APIs are available for Ruby programmers developing MySQL
applications:

   * The MySQL/Ruby API is based on the `libmysqlclient' API library.
     For information on installing and using the MySQL/Ruby API, see
     *Note apis-ruby-mysqlruby::.

   * The Ruby/MySQL API is written to use the native MySQL network
     protocol (a native driver). For information on installing and
     using the Ruby/MySQL API, see *Note apis-ruby-rubymysql::.

For background and syntax information about the Ruby language, see Ruby
Programming Language (http://www.ruby-lang.org).


File: manual.info,  Node: apis-ruby-mysqlruby,  Next: apis-ruby-rubymysql,  Prev: apis-ruby,  Up: apis-ruby

22.12.1 The MySQL/Ruby API
--------------------------

The MySQL/Ruby module provides access to MySQL databases using Ruby
through `libmysqlclient'.

For information on installing the module, and the functions exposed, see
MySQL/Ruby (http://tmtm.org/en/mysql/ruby/).


File: manual.info,  Node: apis-ruby-rubymysql,  Prev: apis-ruby-mysqlruby,  Up: apis-ruby

22.12.2 The Ruby/MySQL API
--------------------------

The Ruby/MySQL module provides access to MySQL databases using Ruby
through a native driver interface using the MySQL network protocol.

For information on installing the module, and the functions exposed, see
Ruby/MySQL (http://tmtm.org/en/ruby/mysql/README_en.html).


File: manual.info,  Node: apis-tcl,  Next: apis-eiffel,  Prev: apis-ruby,  Up: connectors-apis

22.13 MySQL Tcl API
===================

`MySQLtcl' is a simple API for accessing a MySQL database server from
the Tcl programming language (http://en.wikipedia.org/wiki/Tcl). It can
be found at `http://www.xdobry.de/mysqltcl/'.


File: manual.info,  Node: apis-eiffel,  Prev: apis-tcl,  Up: connectors-apis

22.14 MySQL Eiffel Wrapper
==========================

Eiffel MySQL is an interface to the MySQL database server using the
Eiffel programming language
(http://en.wikipedia.org/wiki/Eiffel_(programming_language)), written
by Michael Ravits. It can be found at
`http://efsa.sourceforge.net/archive/ravits/mysql.htm'.


File: manual.info,  Node: extending-mysql,  Next: mysql-enterprise,  Prev: connectors-apis,  Up: Top

23 Extending MySQL
******************

* Menu:

* mysql-internals::              MySQL Internals
* plugin-api::                   The MySQL Plugin API
* adding-functions::             Adding New Functions to MySQL
* porting::                      Debugging and Porting MySQL


File: manual.info,  Node: mysql-internals,  Next: plugin-api,  Prev: extending-mysql,  Up: extending-mysql

23.1 MySQL Internals
====================

* Menu:

* mysql-threads::                MySQL Threads
* mysql-test-suite::             The MySQL Test Suite

This chapter describes a lot of things that you need to know when
working on the MySQL code. To track or contribute to MySQL development,
follow the instructions in *Note installing-development-tree::. If you
are interested in MySQL internals, you should also subscribe to our
`internals' mailing list. This list has relatively low traffic. For
details on how to subscribe, please see *Note mailing-lists::. Many
MySQL developers at Oracle Corporation are on the `internals' list and
we help other people who are working on the MySQL code. Feel free to
use this list both to ask questions about the code and to send patches
that you would like to contribute to the MySQL project!


File: manual.info,  Node: mysql-threads,  Next: mysql-test-suite,  Prev: mysql-internals,  Up: mysql-internals

23.1.1 MySQL Threads
--------------------

The MySQL server creates the following threads:

   * Connection manager threads handle client connection requests on
     the network interfaces that the server listens to. On all
     platforms, one manager thread handles TCP/IP connection requests.
     On Unix, this manager thread also handles Unix socket file
     connection requests. On Windows, a manager thread handles
     shared-memory connection requests, and another handles named-pipe
     connection requests. The server does not create threads to handle
     interfaces that it does not listen to. For example, a Windows
     server that does not have support for named-pipe connections
     enabled does not create a thread to handle them.

   * Connection manager threads associate each client connection with a
     thread dedicated to it that handles authentication and request
     processing for that connection. Manager threads create a new
     thread when necessary but try to avoid doing so by consulting the
     thread cache first to see whether it contains a thread that can be
     used for the connection. When a connection ends, its thread is
     returned to the thread cache if the cache is not full.

     For information about tuning the parameters that control thread
     resources, see *Note connection-threads::.

   * On a master replication server, connections from slave servers are
     handled like client connections: There is one thread per connected
     slave.

   * On a slave replication server, an I/O thread is started to connect
     to the master server and read updates from it. An SQL thread is
     started to apply updates read from the master.  These two threads
     run independently and can be started and stopped independently.

   * A signal thread handles all signals. This thread also normally
     handles alarms and calls `process_alarm()' to force timeouts on
     connections that have been idle too long.

   * If `InnoDB' is used, there will be additional read and write
     threads by default. The number of these are controlled by the
     `innodb_read_io_threads' and `innodb_write_io_threads' parameters.
     See *Note innodb-parameters::.

   * If *Note `mysqld': mysqld. is compiled with `-DUSE_ALARM_THREAD',
     a dedicated thread that handles alarms is created. This is only
     used on some systems where there are problems with `sigwait()' or
     if you want to use the `thr_alarm()' code in your application
     without a dedicated signal handling thread.

   * If the server is started with the `--flush_time=VAL' option, a
     dedicated thread is created to flush all tables every VAL seconds.

   * Each table for which *Note `INSERT DELAYED': insert-delayed.
     statements are issued gets its own thread.  See *Note
     insert-delayed::.

   * If the event scheduler is active, there is one thread for the
     scheduler, and a thread for each event currently running. See
     *Note events-overview::.

*Note `mysqladmin processlist': mysqladmin. only shows the connection,
*Note `INSERT DELAYED': insert-delayed, replication, and event threads.


File: manual.info,  Node: mysql-test-suite,  Prev: mysql-threads,  Up: mysql-internals

23.1.2 The MySQL Test Suite
---------------------------

The test system that is included in Unix source and binary
distributions makes it possible for users and developers to perform
regression tests on the MySQL code. These tests can be run on Unix.

You can also write your own test cases. For information about the MySQL
Test Framework, including system requirements, see the manual available
at `http://dev.mysql.com/doc/mysqltest/2.0/en/'.

The current set of test cases doesn't test everything in MySQL, but it
should catch most obvious bugs in the SQL processing code, operating
system or library issues, and is quite thorough in testing replication.
Our goal is to have the tests cover 100% of the code. We welcome
contributions to our test suite. You may especially want to contribute
tests that examine the functionality critical to your system because
this ensures that all future MySQL releases work well with your
applications.

The test system consists of a test language interpreter (`mysqltest'),
a Perl script to run all tests (`mysql-test-run.pl'), the actual test
cases written in a special test language, and their expected results.
To run the test suite on your system after a build, type `make test'
from the source root directory, or change location to the `mysql-test'
directory and type `./mysql-test-run.pl'. If you have installed a
binary distribution, change location to the `mysql-test' directory
under the installation root directory (for example,
`/usr/local/mysql/mysql-test'), and run `./mysql-test-run.pl'. All
tests should succeed. If any do not, feel free to try to find out why
and report the problem if it indicates a bug in MySQL. See *Note
bug-reports::.

If one test fails, you should run `mysql-test-run.pl' with the
`--force' option to check whether any other tests fail.

If you have a copy of *Note `mysqld': mysqld. running on the machine
where you want to run the test suite, you do not have to stop it, as
long as it is not using ports `9306' or `9307'. If either of those
ports is taken, you should set the `MTR_BUILD_THREAD' environment
variable to an appropriate value, and the test suite will use a
different set of ports for master, slave, and NDB). For example:

     shell> export MTR_BUILD_THREAD=31
     shell> ./mysql-test-run.pl [OPTIONS] [TEST_NAME]

In the `mysql-test' directory, you can run an individual test case with
`./mysql-test-run.pl TEST_NAME'.

If you have a question about the test suite, or have a test case to
contribute, send an email message to the MySQL `internals' mailing
list. See *Note mailing-lists::.


File: manual.info,  Node: plugin-api,  Next: adding-functions,  Prev: mysql-internals,  Up: extending-mysql

23.2 The MySQL Plugin API
=========================

* Menu:

* plugin-api-characteristics::   Plugin API Characteristics
* plugin-api-components::        Plugin API Components
* plugin-types::                 Types of Plugins
* writing-plugins::              Writing Plugins
* plugin-services::              MySQL Services for Plugins

MySQL supports a plugin API that enables creation of server components.
Plugins can be loaded at server startup, or loaded and unloaded at
runtime without restarting the server. The API is generic and does not
specify what plugins can do. The components supported by this interface
include, but are not limited to, storage engines, full-text parser
plugins, and server extensions.

For example, full-text parser plugins can be used to replace or augment
the built-in full-text parser. A plugin can parse text into words using
rules that differ from those used by the built-in parser. This can be
useful if you need to parse text with characteristics different from
those expected by the built-in parser.

The plugin interface is more general than the older user-defined
function (UDF) interface.

The plugin interface uses the `plugin' table in the `mysql' database to
record information about plugins that have been installed permanently
with the *Note `INSTALL PLUGIN': install-plugin. statement. This table
is created as part of the MySQL installation process.  Plugins can also
be installed for a single server invocation with the `--plugin-load'
option. Plugins installed this way are not recorded in the `plugin'
table. See *Note server-plugin-loading::.

MySQL 5.5.7 and up supports an API for client plugins in addition to
that for server plugins. This is used, for example, by authentication
plugins where a server-side plugin and a client-side plugin cooperate
to enable clients to connect to the server through a variety of
authentication methods.

* Additional Resources *

The book `MySQL 5.1 Plugin Development' by Sergei Golubchik and Andrew
Hutchings provides a wealth of detail about the plugin API. Despite the
fact that the book's title refers to MySQL Server 5.1, most of the
information in it applies to later versions as well.


File: manual.info,  Node: plugin-api-characteristics,  Next: plugin-api-components,  Prev: plugin-api,  Up: plugin-api

23.2.1 Plugin API Characteristics
---------------------------------

The server plugin API has these characteristics:

   * All plugins have several things in common.

     Each plugin has a name that it can be referred to in SQL
     statements, as well as other metadata such as an author and a
     description that provide other information. This information can
     be examined in the *Note `INFORMATION_SCHEMA.PLUGINS':
     plugins-table.  table or using the *Note `SHOW PLUGINS':
     show-plugins. statement.

   * The plugin framework is extendable to accommodate different kinds
     of plugins.

     Although some aspects of the plugin API are common to all types of
     plugins, the API also permits type-specific interface elements so
     that different types of plugins can be created. A plugin with one
     purpose can have an interface most appropriate to its own
     requirements and not the requirements of some other plugin type.

     Interfaces for several types of plugins exist, such as storage
     engines, full-text parser, and `INFORMATION_SCHEMA' tables. Others
     can be added.

   * Plugins can expose information to users.

     A plugin can implement system and status variables that are
     available through the *Note `SHOW VARIABLES': show-variables. and
     *Note `SHOW STATUS': show-status. statements.

   * The plugin API includes versioning information.

     The version information included in the plugin API enables a
     plugin library and each plugin that it contains to be
     self-identifying with respect to the API version that was used to
     build the library. If the API changes over time, the version
     numbers will change, but a server can examine a given plugin
     library's version information to determine whether it supports the
     plugins in the library.

     There are two types of version numbers. The first is the version
     for the general plugin framework itself. Each plugin library
     includes this kind of version number. The second type of version
     applies to individual plugins. Each specific type of plugin has a
     version for its interface, so each plugin in a library has a
     type-specific version number. For example, a library containing a
     full-text parser plugin has a general plugin API version number,
     and the plugin has a version number specific to the full-text
     plugin interface.

   * The plugin API implements security restrictions.

     A plugin library must be installed in a specific dedicated
     directory for which the location is controlled by the server and
     cannot be changed at runtime. Also, the library must contain
     specific symbols that identify it as a plugin library. The server
     will not load something as a plugin if it was not built as a
     plugin.

   * Plugins have access to server services.

     The services interface exposes server functionality that plugins
     can access using ordinary function calls. For details, see *Note
     plugin-services::.

In some respects, the server plugin API is similar to the older
user-defined function (UDF) API that it supersedes, but the plugin API
has several advantages over the older interface. For example, UDFs had
no versioning information. Also, the newer plugin interface eliminates
the security issues of the older UDF interface. The older interface for
writing nonplugin UDFs permitted libraries to be loaded from any
directory searched by the system's dynamic linker, and the symbols that
identified the UDF library were relatively nonspecific.

The client plugin API has similar architectural characteristics, but
client plugins have no direct access to the server the way server
plugins do.


File: manual.info,  Node: plugin-api-components,  Next: plugin-types,  Prev: plugin-api-characteristics,  Up: plugin-api

23.2.2 Plugin API Components
----------------------------

The server plugin implementation comprises several components.

SQL statements:

   * *Note `INSTALL PLUGIN': install-plugin. registers a plugin in the
     `mysql.plugin' table and loads the plugin code.

   * *Note `UNINSTALL PLUGIN': uninstall-plugin. unregisters a plugin
     from the `mysql.plugin' table and unloads the plugin code.

   * The `WITH PARSER' clause for full-text index creation associates a
     full-text parser plugin with a given `FULLTEXT' index.

   * *Note `SHOW PLUGINS': show-plugins. displays information about
     server plugins.

Command-line options and system variables:

   * The `--plugin-load' option enables plugins to be loaded at server
     startup time.

   * The `plugin_dir' system variable indicates the location of the
     directory where all plugins must be installed. The value of this
     variable can be specified at server startup with a
     `--plugin_dir=PATH' option. *Note `mysql_config --plugindir':
     mysql-config. displays the default plugin directory path name.

For additional information about plugin loading, see *Note
server-plugin-loading::.

Plugin-related tables:

   * The *Note `INFORMATION_SCHEMA.PLUGINS': plugins-table.  table
     contains plugin information.

   * The `mysql.plugin' table lists each plugin that was installed with
     *Note `INSTALL PLUGIN': install-plugin. and is required for plugin
     use. For new MySQL installations, this table is created during the
     installation process.

The client plugin implementation is simpler:

   * For the *Note `mysql_options()': mysql-options. C API function,
     the `MYSQL_DEFAULT_AUTH' and `MYSQL_PLUGIN_DIR' options enable
     client programs to load authentication plugins.

   * There are C API functions that enable management of client plugins.

To examine how MySQL implements plugins, consult the following source
files in a MySQL source distribution:

   * In the `include/mysql' directory, `plugin.h' exposes the public
     plugin API.  This file should be examined by anyone who wants to
     write a plugin library.  `plugin_XXX.h' files provide additional
     information that pertains to specific types of plugins.
     `client_plugin.h' contains information specific to client plugins.

   * In the `sql' directory, `sql_plugin.h' and `sql_plugin.cc'
     comprise the internal plugin implementation. `sql_acl.cc' is where
     the server uses authentication plugins. These files need not be
     consulted by plugin developers. They may be of interest for those
     who want to know more about how the server handles plugins.

   * In the `sql-common' directory, `client_plugin.h' implements the C
     API client plugin functions, and `client.c' implements client
     authentication support. These files need not be consulted by
     plugin developers. They may be of interest for those who want to
     know more about how the server handles plugins.


File: manual.info,  Node: plugin-types,  Next: writing-plugins,  Prev: plugin-api-components,  Up: plugin-api

23.2.3 Types of Plugins
-----------------------

* Menu:

* storage-engine-plugins::       Storage Engine Plugins
* full-text-plugins::            Full-Text Parser Plugins
* daemon-plugins::               Daemon Plugins
* information-schema-plugins::   `INFORMATION_SCHEMA' Plugins
* semisynchronous-replication-plugins::  Semisynchronous Replication Plugins
* audit-plugins::                Audit Plugins
* authentication-plugins::       Authentication Plugins

The plugin API enables creation of plugins that implement several
capabilities:

   * Storage engines

   * Full-text parsers

   * Daemons

   * `INFORMATION_SCHEMA' tables

   * Semisynchronous replication

   * Auditing

   * Authentication

The following sections provide an overview of these plugin types.


File: manual.info,  Node: storage-engine-plugins,  Next: full-text-plugins,  Prev: plugin-types,  Up: plugin-types

23.2.3.1 Storage Engine Plugins
...............................

The pluggable storage engine architecture used by MySQL Server enables
storage engines to be written as plugins and loaded into and unloaded
from a running server. For a description of this architecture, see
*Note pluggable-storage-overview::.

For information on how to use the plugin API to write storage engines,
see MySQL Internals: Writing a Custom Storage Engine
(http://dev.mysql.com/doc/internals/en/custom-engine.html).


File: manual.info,  Node: full-text-plugins,  Next: daemon-plugins,  Prev: storage-engine-plugins,  Up: plugin-types

23.2.3.2 Full-Text Parser Plugins
.................................

MySQL has a built-in parser that it uses by default for full-text
operations (parsing text to be indexed, or parsing a query string to
determine the terms to be used for a search).  For full-text
processing, `parsing' means extracting words from text or a query
string based on rules that define which character sequences make up a
word and where word boundaries lie.

When parsing for indexing purposes, the parser passes each word to the
server, which adds it to a full-text index. When parsing a query
string, the parser passes each word to the server, which accumulates
the words for use in a search.

The parsing properties of the built-in full-text parser are described
in *Note fulltext-search::. These properties include rules for
determining how to extract words from text. The parser is influenced by
certain system variables such as `ft_min_word_len' and
`ft_max_word_len' that cause words shorter or longer to be excluded,
and by the stopword list that identifies common words to be ignored.

The plugin API enables you to provide a full-text parser of your own so
that you have control over the basic duties of a parser. A parser
plugin can operate in either of two roles:

   * The plugin can replace the built-in parser. In this role, the
     plugin reads the input to be parsed, splits it up into words, and
     passes the words to the server (either for indexing or for word
     accumulation).

     One reason to use a parser this way is that you need to use
     different rules from those of the built-in parser for determining
     how to split up input into words. For example, the built-in parser
     considers the text `case-sensitive' to consist of two words `case'
     and `sensitive,' whereas an application might need to treat the
     text as a single word.

   * The plugin can act in conjunction with the built-in parser by
     serving as a front end for it. In this role, the plugin extracts
     text from the input and passes the text to the parser, which
     splits up the text into words using its normal parsing rules. In
     particular, this parsing will be affected by the `ft_XXX' system
     variables and the stopword list.

     One reason to use a parser this way is that you need to index
     content such as PDF documents, XML documents, or `.doc' files. The
     built-in parser is not intended for those types of input but a
     plugin can pull out the text from these input sources and pass it
     to the built-in parser.

It is also possible for a parser plugin to operate in both roles. That
is, it could extract text from nonplaintext input (the front end role),
and also parse the text into words (thus replacing the built-in parser).

A full-text plugin is associated with full-text indexes on a per-index
basis. That is, when you install a parser plugin initially, that does
not cause it to be used for any full-text operations. It simply becomes
available. For example, a full-text parser plugin becomes available to
be named in a `WITH PARSER' clause when creating individual `FULLTEXT'
indexes. To create such an index at table-creation time, do this:

     CREATE TABLE t
     (
       doc CHAR(255),
       FULLTEXT INDEX (doc) WITH PARSER my_parser
     ) ENGINE=MyISAM;

Or you can add the index after the table has been created:

     ALTER TABLE t ADD FULLTEXT INDEX (doc) WITH PARSER my_parser;

The only SQL change for associating the parser with the index is the
`WITH PARSER' clause. Searches are specified as before, with no changes
needed for queries.

When you associate a parser plugin with a `FULLTEXT' index, the plugin
is required for using the index. If the parser plugin is dropped, any
index associated with it becomes unusable. Any attempt to use a table
for which a plugin is not available results in an error, although *Note
`DROP TABLE': drop-table. is still possible.

For more information about full-text plugins, see *Note
writing-full-text-plugins::.


File: manual.info,  Node: daemon-plugins,  Next: information-schema-plugins,  Prev: full-text-plugins,  Up: plugin-types

23.2.3.3 Daemon Plugins
.......................

A daemon plugin is a simple type of plugin used for code that should be
run by the server but that does not communicate with it. MySQL
distributions include an example daemon plugin that writes periodic
heartbeat messages to a file.

For more information about daemon plugins, see *Note
writing-daemon-plugins::.


File: manual.info,  Node: information-schema-plugins,  Next: semisynchronous-replication-plugins,  Prev: daemon-plugins,  Up: plugin-types

23.2.3.4 `INFORMATION_SCHEMA' Plugins
.....................................

`INFORMATION_SCHEMA' plugins enable the creation of tables containing
server metadata that are exposed to users through the
`INFORMATION_SCHEMA' database. For example, `InnoDB' uses
`INFORMATION_SCHEMA' plugins to provide tables that contain information
about current transactions and locks.

For more information about `INFORMATION_SCHEMA' plugins, see *Note
writing-information-schema-plugins::.


File: manual.info,  Node: semisynchronous-replication-plugins,  Next: audit-plugins,  Prev: information-schema-plugins,  Up: plugin-types

23.2.3.5 Semisynchronous Replication Plugins
............................................

MySQL replication is asynchronous by default. With semisynchronous
replication, a commit performed on the master side blocks before
returning to the session that performed the transaction until at least
one slave acknowledges that it has received and logged the events for
the transaction.  Semisynchronous replication is implemented through
complementary master and client plugins. See *Note
replication-semisync::.

For more information about semisynchronous replication plugins, see
*Note writing-semisynchronous-replication-plugins::.


File: manual.info,  Node: audit-plugins,  Next: authentication-plugins,  Prev: semisynchronous-replication-plugins,  Up: plugin-types

23.2.3.6 Audit Plugins
......................

As of MySQL 5.5.3, the server provides a pluggable audit interface that
enables information about server operations to be reported to
interested parties. Currently, audit notification occurs for these
operations (although the interface is general and the server could be
modified to report others):

   * Write a message to the general query log (if the log is enabled)

   * Write a message to the error log

   * Send a query result to a client

Audit plugins may register with the audit interface to receive
notification about server operations. When an auditable event occurs
within the server, the server determines whether notification is
needed. For each registered audit plugin, the server checks the event
against those event classes in which the plugin is interested and
passes the event to the plugin if there is a match.

This interface enables audit plugins to receive notifications only
about operations in event classes they consider significant and to
ignore others. The interface provides for categorization of operations
into event classes and further division into event subclasses within
each class.

When an audit plugin is notified of an auditable event, it receives a
pointer to the current THD structure and a pointer to a structure that
contains information about the event. The plugin can examine the event
and perform whatever auditing actions are appropriate. For example, the
plugin can see what statement produced a result set or was logged, the
number of rows in a result, who the current user was for an operation,
or the error code for failed operations.

For more information about audit plugins, see *Note
writing-audit-plugins::.


File: manual.info,  Node: authentication-plugins,  Prev: audit-plugins,  Up: plugin-types

23.2.3.7 Authentication Plugins
...............................

MySQL 5.5.7 and up supports pluggable authentication.  Authentication
plugins exist on both the server and client sides. Plugins on the
server side implement authentication methods for use by clients when
they connect to the server. A plugin on the client side communicates
with a server-side plugin to provide the authentication information
that it requires. A client-side plugin may interact with the user,
performing tasks such as soliciting a password or other authentication
credentials to be sent to the server. See *Note
pluggable-authentication::.

Pluggable authentication also enables proxy user capability, in which
one user takes the identity of another user. A server-side
authentication plugin can return to the server the name of the user
whose identity the connecting user should have. See *Note proxy-users::.

For more information about authentication plugins, see *Note
writing-authentication-plugins::.


File: manual.info,  Node: writing-plugins,  Next: plugin-services,  Prev: plugin-types,  Up: plugin-api

23.2.4 Writing Plugins
----------------------

* Menu:

* writing-plugins-overview::     Overview of Plugin Writing
* plugin-data-structures::       Plugin Data Structures
* compiling-plugin-libraries::   Compiling and Installing Plugin Libraries
* writing-full-text-plugins::    Writing Full-Text Parser Plugins
* writing-daemon-plugins::       Writing Daemon Plugins
* writing-information-schema-plugins::  Writing `INFORMATION_SCHEMA' Plugins
* writing-semisynchronous-replication-plugins::  Writing Semisynchronous Replication Plugins
* writing-audit-plugins::        Writing Audit Plugins
* writing-authentication-plugins::  Writing Authentication Plugins

To create a plugin library, you must provide the required descriptor
information that indicates what plugins the library file contains, and
write the interface functions for each plugin.

Every server plugin must have a general descriptor that provides
information to the plugin API, and a type-specific descriptor that
provides information about the plugin interface for a given type of
plugin. The structure of the general descriptor is the same for all
plugin types. The structure of the type-specific descriptor varies
among plugin types and is determined by the requirements of what the
plugin needs to do. The server plugin interface also enables plugins to
expose status and system variables. These variables become visible
through the *Note `SHOW STATUS': show-status. and *Note `SHOW
VARIABLES': show-variables. statements and the corresponding
`INFORMATION_SCHEMA' tables.

For client-side plugins, the architecture is a bit different.  Each
plugin must have a descriptor, but there is no division into separate
general and type-specific descriptors. Instead, the descriptor begins
with a fixed set of members common to all client plugin types, and the
common members are followed by any additional members required to
implement the specific plugin type.

You can write plugins in C or C++ (or another language that can use C
calling conventions). Plugins are loaded and unloaded dynamically, so
your operating system must support dynamic loading and you must have
compiled the calling application dynamically (not statically). For
server plugins, this means that *Note `mysqld': mysqld. must be
compiled dynamically.

A server plugin contains code that becomes part of the running server,
so when you write the plugin, you are bound by any and all constraints
that otherwise apply to writing server code. For example, you may have
problems if you attempt to use functions from the `libstdc++' library.
These constraints may change in future versions of the server, so it is
possible that server upgrades will require revisions to plugins
originally written for older servers. For information about these
constraints, see *Note source-configuration-options::, and *Note
compilation-problems::.

Client plugin writers should avoid dependencies on what symbols the
calling application has because you cannot be sure what applications
will use the plugin.


File: manual.info,  Node: writing-plugins-overview,  Next: plugin-data-structures,  Prev: writing-plugins,  Up: writing-plugins

23.2.4.1 Overview of Plugin Writing
...................................

The following procedure provides an overview of the steps needed to
create a plugin library. The next sections provide additional details
on setting plugin data structures and writing specific types of plugins.

  1. In the plugin source file, include the header files that the
     plugin library needs. The `plugin.h' file is required, and the
     library might require other files as well. For example:

          #include <stdlib.h>
          #include <ctype.h>
          #include <mysql/plugin.h>

  2. Set up the descriptor information for the plugin library file. For
     server plugins, write the library descriptor, which must contain
     the general plugin descriptor for each server plugin in the file.
     For more information, see *Note server-plugin-descriptors::. In
     addition, set up the type-specific descriptor for each server
     plugin in the library. Each plugin's general descriptor points to
     its type-specific descriptor.

     For client plugins, write the client descriptor. For more
     information, see *Note client-plugin-descriptors::.

  3. Write the plugin interface functions for each plugin. For example,
     each plugin's general plugin descriptor points to the
     initialization and deinitialization functions that the server
     should invoke when it loads and unloads the plugin.  The plugin's
     type-specific description may also point to interface functions.

  4. For server plugins, set up the status and system variables, if
     there are any.

  5. Compile the plugin library as a shared library and install it in
     the plugin directory. For more information, see *Note
     compiling-plugin-libraries::.

  6. For server plugins, register the plugin with the server.  For more
     information, see *Note server-plugin-loading::.

  7. Test the plugin to verify that it works properly.


File: manual.info,  Node: plugin-data-structures,  Next: compiling-plugin-libraries,  Prev: writing-plugins-overview,  Up: writing-plugins

23.2.4.2 Plugin Data Structures
...............................

* Menu:

* server-plugin-descriptors::    Server Plugin Library and Plugin Descriptors
* plugin-status-system-variables::  Server Plugin Status and System Variables
* client-plugin-descriptors::    Client Plugin Descriptors

A plugin library file includes descriptor information to indicate what
plugins it contains.

If the plugin library contains any server plugins, it must include the
following descriptor information:

   * A library descriptor indicates the general server plugin API
     version number used by the library and contains a general plugin
     descriptor for each server plugin in the library. To provide the
     framework for this descriptor, invoke two macros from the
     `plugin.h' header file:

          mysql_declare_plugin(NAME)
           ... ONE OR MORE SERVER PLUGIN DESCRIPTORS HERE ...
          mysql_declare_plugin_end;

     The macros expand to provide a declaration for the API version
     automatically. You must provide the plugin descriptors.

   * Within the library descriptor, each general server plugin is
     described by a `st_mysql_plugin' structure. This plugin descriptor
     structure contains information that is common to every type of
     server plugin: A value that indicates the plugin type; the plugin
     name, author, description, and license type; pointers to the
     initialization and deinitialization functions that the server
     invokes when it loads and unloads the plugin, and pointers to any
     status or system variables the plugin implements.

   * Each general server plugin descriptor within the library
     descriptor also contains a pointer to a type-specific plugin
     descriptor. The structure of the type-specific descriptors varies
     from one plugin type to another because each type of plugin can
     have its own API. A type-specific plugin descriptor contains a
     type-specific API version number and pointers to the functions
     that are needed to implement that plugin type. For example, a
     full-text parser plugin has initialization and deinitialization
     functions, and a main parsing function. The server invokes these
     functions when it uses the plugin to parse text.

The plugin library also contains the interface functions that are
referenced by the general and type-specific descriptors for each plugin
in the library.

If the plugin library contains a client plugin, it must include a
descriptor for the plugin. The descriptor begins with a fixed set of
members common to all client plugins, followed by any members specific
to the plugin type. To provide the descriptor framework, invoke two
macros from the `client_plugin.h' header file:

     mysql_declare_client_plugin(PLUGIN_TYPE)
        ... MEMBERS COMMON TO ALL CLIENT PLUGINS ...
        ... TYPE-SPECIFIC EXTRA MEMBERS ...
     mysql_end_client_plugin;

The plugin library also contains any interface functions referenced by
the client descriptor.

The `mysql_declare_plugin()' and `mysql_declare_client_plugin()' macros
differ somewhat in how they can be invoked, which has implications for
the contents of plugin libraries. The following guidelines summarize
the rules:

   * `mysql_declare_plugin()' and `mysql_declare_client_plugin()' can
     both be used in the same source file, which means that a plugin
     library can contain both server and client plugins.  However, each
     of `mysql_declare_plugin()' and `mysql_declare_client_plugin()' can
     be used at most once.

   * `mysql_declare_plugin()' permits multiple server plugin
     declarations, so a plugin library can contain multiple server
     plugins.

   * `mysql_declare_client_plugin()' permits only a single client
     plugin declaration. To create multiple client plugins, separate
     plugin libraries must be used.

When a client program looks for a client plugin that is in a plugin
library and not built into `libmysqlclient', it looks for a file with a
basename that is the same as the plugin name. For example, if a program
needs to use a client authentication plugin named `auth_xxx' on a
system that uses `.so' as the library suffix, it looks in the file
named `auth_xxx.so'. (On Mac OS X, the program looks first for
`auth_xxx.dylib', then for `auth_xxx.so'.) For this reason, if a plugin
library contains a client plugin, the library must have the same
basename as that plugin.

The same is not true for a library that contains server plugins. The
`--plugin-load' option and the *Note `INSTALL PLUGIN': install-plugin.
statement provide the library file name explicitly, so there need be no
explicit relationship between the library name and the name of any
server plugins it contains.


File: manual.info,  Node: server-plugin-descriptors,  Next: plugin-status-system-variables,  Prev: plugin-data-structures,  Up: plugin-data-structures

23.2.4.3 Server Plugin Library and Plugin Descriptors
.....................................................

Every plugin library that contains server plugins must include a
library descriptor that contains the general plugin descriptor for each
server plugin in the file. This section discusses how to write the
library and general descriptors for server plugins.

The library descriptor must define two symbols:

   * `_mysql_plugin_interface_version_' specifies the version number of
     the general plugin framework. This is given by the
     `MYSQL_PLUGIN_INTERFACE_VERSION' symbol, which is defined in the
     `plugin.h' file.

   * `_mysql_plugin_declarations_' defines an array of plugin
     declarations, terminated by a declaration with all members set to
     0. Each declaration is an instance of the `st_mysql_plugin'
     structure (also defined in `plugin.h'). There must be one of these
     for each server plugin in the library.

If the server does not find those two symbols in a library, it does not
accept it as a legal plugin library and rejects it with an error. This
prevents use of a library for plugin purposes unless it was built
specifically as a plugin library.

The conventional way to define the two required symbols is by using the
`mysql_declare_plugin()' and `mysql_declare_plugin_end' macros from the
`plugin.h' file:

     mysql_declare_plugin(NAME)
      ... ONE OR MORE SERVER PLUGIN DESCRIPTORS HERE ...
     mysql_declare_plugin_end;

Each server plugin must have a general descriptor that provides
information to the server plugin API. The general descriptor has the
same structure for all plugin types. The `st_mysql_plugin' structure in
the `plugin.h' file defines this descriptor:

     struct st_mysql_plugin
     {
       int type;             /* the plugin type (a MYSQL_XXX_PLUGIN value)   */
       void *info;           /* pointer to type-specific plugin descriptor   */
       const char *name;     /* plugin name                                  */
       const char *author;   /* plugin author (for I_S.PLUGINS)              */
       const char *descr;    /* general descriptive text (for I_S.PLUGINS)   */
       int license;          /* the plugin license (PLUGIN_LICENSE_XXX)      */
       int (*init)(void *);  /* the function to invoke when plugin is loaded */
       int (*deinit)(void *);/* the function to invoke when plugin is unloaded */
       unsigned int version; /* plugin version (for I_S.PLUGINS)             */
       struct st_mysql_show_var *status_vars;
       struct st_mysql_sys_var **system_vars;
       void * __reserved1;   /* reserved for dependency checking             */
       unsigned long flags;  /* flags for plugin */
     };

The `st_mysql_plugin' descriptor structure members are used as follows.
`char *' members should be specified as null-terminated strings.

   * `type': The plugin type. This must be one of the plugin-type
     values from `plugin.h':

          /*
            The allowable types of plugins
          */
          #define MYSQL_UDF_PLUGIN             0  /* User-defined function        */
          #define MYSQL_STORAGE_ENGINE_PLUGIN  1  /* Storage Engine               */
          #define MYSQL_FTPARSER_PLUGIN        2  /* Full-text parser plugin      */
          #define MYSQL_DAEMON_PLUGIN          3  /* The daemon/raw plugin type */
          #define MYSQL_INFORMATION_SCHEMA_PLUGIN  4  /* The I_S plugin type */
          #define MYSQL_AUDIT_PLUGIN           5  /* The Audit plugin type        */
          #define MYSQL_REPLICATION_PLUGIN     6  /* The replication plugin type */
          #define MYSQL_AUTHENTICATION_PLUGIN  7  /* The authentication plugin type */
          ...

     For example, for a full-text parser plugin, the `type' value is
     `MYSQL_FTPARSER_PLUGIN'.

   * `info': A pointer to the type-specific descriptor for the plugin.
     This descriptor's structure depends on the particular type of
     plugin, unlike that of the general plugin descriptor structure. For
     version-control purposes, the first member of the type-specific
     descriptor for every plugin type is expected to be the interface
     version for the type. This enables the server to check the
     type-specific version for every plugin no matter its type.
     Following the version number, the descriptor includes any other
     members needed, such as callback functions and other information
     needed by the server to invoke the plugin properly. Later sections
     on writing particular types of server plugins describe the
     structure of their type-specific descriptors.

   * `name': A string that gives the plugin name. This is the name that
     will be listed in the `mysql.plugin' table and by which you refer
     to the plugin in SQL statements such as *Note `INSTALL PLUGIN':
     install-plugin. and *Note `UNINSTALL PLUGIN': uninstall-plugin, or
     with the `--plugin-load' option.  The name is also visible in the
     *Note `INFORMATION_SCHEMA.PLUGINS': plugins-table.  table or the
     output from *Note `SHOW PLUGINS': show-plugins.

     The plugin name should not begin with the name of any server
     option. If it does, the server will fail to initialize it. For
     example, the server has a `--socket' option, so you should not use
     a plugin name such as `socket', `socket_plugin', and so forth.

   * `author': A string naming the plugin author. This can be whatever
     you like.

   * `desc': A string that provides a general description of the
     plugin. This can be whatever you like.

   * `license': The plugin license type. The value can be one of
     `PLUGIN_LICENSE_PROPRIETARY', `PLUGIN_LICENSE_GPL', or
     `PLUGIN_LICENSE_BSD'.

   * `init': A once-only initialization function, or `NULL' if there is
     no such function. The server executes this function when it loads
     the plugin, which happens for *Note `INSTALL PLUGIN':
     install-plugin. or, for plugins listed in the `mysql.plugin'
     table, at server startup. The function takes one argument that
     points to the internal structure used to identify the plugin. It
     returns zero for success and nonzero for failure.

   * `deinit': A once-only deinitialization function, or `NULL' if
     there is no such function. The server executes this function when
     it unloads the plugin, which happens for *Note `UNINSTALL PLUGIN':
     uninstall-plugin. or, for plugins listed in the `mysql.plugin'
     table, at server shutdown. The function takes one argument that
     points to the internal structure used to identify the plugin It
     returns zero for success and nonzero for failure.

   * `version': The plugin version number.  When the plugin is
     installed, this value can be retrieved from the *Note
     `INFORMATION_SCHEMA.PLUGINS': plugins-table.  table. The value
     includes major and minor numbers. If you write the value as a hex
     constant, the format is `0xMMNN', where MM and `NN' are the major
     and minor numbers, respectively. For example, `0x0302' represents
     version 3.2.

   * `status_vars': A pointer to a structure for status variables
     associated with the plugin, or `NULL' if there are no such
     variables.  When the plugin is installed, these variables are
     displayed in the output of the *Note `SHOW STATUS': show-status.
     statement.

     The `status_vars' member, if not `NULL', points to an array of
     `st_mysql_show_var' structures that describe status variables. See
     *Note plugin-status-system-variables::.

   * `system_vars': A pointer to a structure for system variables
     associated with the plugin, or `NULL' if there are no such
     variables.  These options and system variables can be used to help
     initialize variables within the plugin.

     The `system_vars' member, if not `NULL', points to an array of
     `st_mysql_sys_var' structures that describe system variables. See
     *Note plugin-status-system-variables::.

   * `__reserved1': A placeholder for the future. Currently, it should
     be set to `NULL'.

   * `flags': Plugin flags. Individual bits correspond to different
     flags. The value should be set to the OR of the applicable flags.
     These flags are available:

          #define PLUGIN_OPT_NO_INSTALL   1UL   /* Not dynamically loadable */
          #define PLUGIN_OPT_NO_UNINSTALL 2UL   /* Not dynamically unloadable */

     `PLUGIN_OPT_NO_INSTALL' indicates that the plugin cannot be loaded
     at runtime with the *Note `INSTALL PLUGIN': install-plugin.
     statement.  This is appropriate for plugins that must be loaded at
     server startup with the `--plugin-load' option.
     `PLUGIN_OPT_NO_UNINSTALL' indicates that the plugin cannot be
     unloaded at runtime with the *Note `UNINSTALL PLUGIN':
     uninstall-plugin.  statement.

     This member was added in MySQL 5.5.16.

The server invokes the `init' and `deinit' functions in the general
plugin descriptor only when loading and unloading the plugin. They have
nothing to do with use of the plugin such as happens when an SQL
statement causes the plugin to be invoked.

For example, the descriptor information for a library that contains a
single full-text parser plugin named `simple_parser' looks like this:

     mysql_declare_plugin(ftexample)
     {
       MYSQL_FTPARSER_PLUGIN,      /* type                            */
       &simple_parser_descriptor,  /* descriptor                      */
       "simple_parser",            /* name                            */
       "Oracle Corporation",       /* author                          */
       "Simple Full-Text Parser",  /* description                     */
       PLUGIN_LICENSE_GPL,         /* plugin license                  */
       simple_parser_plugin_init,  /* init function (when loaded)     */
       simple_parser_plugin_deinit,/* deinit function (when unloaded) */
       0x0001,                     /* version                         */
       simple_status,              /* status variables                */
       simple_system_variables,    /* system variables                */
       NULL,
       0
     }
     mysql_declare_plugin_end;

For a full-text parser plugin, the type must be
`MYSQL_FTPARSER_PLUGIN'. This is the value that identifies the plugin
as being legal for use in a `WITH PARSER' clause when creating a
`FULLTEXT' index. (No other plugin type is legal for this clause.)

`plugin.h' defines the `mysql_declare_plugin()' and
`mysql_declare_plugin_end' macros like this:

     #ifndef MYSQL_DYNAMIC_PLUGIN
     #define __MYSQL_DECLARE_PLUGIN(NAME, VERSION, PSIZE, DECLS) \
     MYSQL_PLUGIN_EXPORT int VERSION= MYSQL_PLUGIN_INTERFACE_VERSION; \
     MYSQL_PLUGIN_EXPORT int PSIZE= sizeof(struct st_mysql_plugin); \
     MYSQL_PLUGIN_EXPORT struct st_mysql_plugin DECLS[]= {
     #else
     #define __MYSQL_DECLARE_PLUGIN(NAME, VERSION, PSIZE, DECLS) \
     MYSQL_PLUGIN_EXPORT int _mysql_plugin_interface_version_= MYSQL_PLUGIN_INTERFACE_VERSION; \
     MYSQL_PLUGIN_EXPORT int _mysql_sizeof_struct_st_plugin_= sizeof(struct st_mysql_plugin); \
     MYSQL_PLUGIN_EXPORT struct st_mysql_plugin _mysql_plugin_declarations_[]= {
     #endif

     #define mysql_declare_plugin(NAME) \
     __MYSQL_DECLARE_PLUGIN(NAME, \
                      builtin_ ## NAME ## _plugin_interface_version, \
                      builtin_ ## NAME ## _sizeof_struct_st_plugin, \
                      builtin_ ## NAME ## _plugin)

     #define mysql_declare_plugin_end ,{0,0,0,0,0,0,0,0,0,0,0,0,0}}

*Note*:

Those declarations define the `_mysql_plugin_interface_version_' symbol
only if the `MYSQL_DYNAMIC_PLUGIN' symbol is defined. This means that
`-DMYSQL_DYNAMIC_PLUGIN' must be provided as part of the compilation
command to build the plugin as a shared library.

When the macros are used as just shown, they expand to the following
code, which defines both of the required symbols
(`_mysql_plugin_interface_version_' and `_mysql_plugin_declarations_'):

     int _mysql_plugin_interface_version_= MYSQL_PLUGIN_INTERFACE_VERSION;
     int _mysql_sizeof_struct_st_plugin_= sizeof(struct st_mysql_plugin);
     struct st_mysql_plugin _mysql_plugin_declarations_[]= {
     {
       MYSQL_FTPARSER_PLUGIN,      /* type                            */
       &simple_parser_descriptor,  /* descriptor                      */
       "simple_parser",            /* name                            */
       "Oracle Corporation",       /* author                          */
       "Simple Full-Text Parser",  /* description                     */
       PLUGIN_LICENSE_GPL,         /* plugin license                  */
       simple_parser_plugin_init,  /* init function (when loaded)     */
       simple_parser_plugin_deinit,/* deinit function (when unloaded) */
       0x0001,                     /* version                         */
       simple_status,              /* status variables                */
       simple_system_variables,    /* system variables                */
       NULL,
       0
     }
       ,{0,0,0,0,0,0,0,0,0,0,0,0}}
     };

The preceding example declares a single plugin in the general
descriptor, but it is possible to declare multiple plugins. List the
declarations one after the other between `mysql_declare_plugin()' and
`mysql_declare_plugin_end', separated by commas.

MySQL server plugins can be written in C or C++ (or another language
that can use C calling conventions). If you write a C++ plugin, one C++
feature that you should not use is nonconstant variables to initialize
global structures.  Members of structures such as the `st_mysql_plugin'
structure should be initialized only with constant variables. The
`simple_parser' descriptor shown earlier is permissible in a C++ plugin
because it satisfies that requirement:

     mysql_declare_plugin(ftexample)
     {
       MYSQL_FTPARSER_PLUGIN,      /* type                            */
       &simple_parser_descriptor,  /* descriptor                      */
       "simple_parser",            /* name                            */
       "Oracle Corporation",       /* author                          */
       "Simple Full-Text Parser",  /* description                     */
       PLUGIN_LICENSE_GPL,         /* plugin license                  */
       simple_parser_plugin_init,  /* init function (when loaded)     */
       simple_parser_plugin_deinit,/* deinit function (when unloaded) */
       0x0001,                     /* version                         */
       simple_status,              /* status variables                */
       simple_system_variables,    /* system variables                */
       NULL,
       0
     }
     mysql_declare_plugin_end;

Here is another valid way to write the general descriptor.  It uses
constant variables to indicate the plugin name, author, and description:

     const char *simple_parser_name = "simple_parser";
     const char *simple_parser_author = "Oracle Corporation";
     const char *simple_parser_description = "Simple Full-Text Parser";

     mysql_declare_plugin(ftexample)
     {
       MYSQL_FTPARSER_PLUGIN,      /* type                            */
       &simple_parser_descriptor,  /* descriptor                      */
       simple_parser_name,         /* name                            */
       simple_parser_author,       /* author                          */
       simple_parser_description,  /* description                     */
       PLUGIN_LICENSE_GPL,         /* plugin license                  */
       simple_parser_plugin_init,  /* init function (when loaded)     */
       simple_parser_plugin_deinit,/* deinit function (when unloaded) */
       0x0001,                     /* version                         */
       simple_status,              /* status variables                */
       simple_system_variables,    /* system variables                */
       NULL,
       0
     }
     mysql_declare_plugin_end;

However, the following general descriptor is invalid. It uses structure
members to indicate the plugin name, author, and description, but
structures are not considered constant initializers in C++:

     typedef struct
     {
       const char *name;
       const char *author;
       const char *description;
     } plugin_info;

     plugin_info parser_info = {
       "simple_parser",
       "Oracle Corporation",
       "Simple Full-Text Parser"
     };

     mysql_declare_plugin(ftexample)
     {
       MYSQL_FTPARSER_PLUGIN,      /* type                            */
       &simple_parser_descriptor,  /* descriptor                      */
       parser_info.name,           /* name                            */
       parser_info.author,         /* author                          */
       parser_info.description,    /* description                     */
       PLUGIN_LICENSE_GPL,         /* plugin license                  */
       simple_parser_plugin_init,  /* init function (when loaded)     */
       simple_parser_plugin_deinit,/* deinit function (when unloaded) */
       0x0001,                     /* version                         */
       simple_status,              /* status variables                */
       simple_system_variables,    /* system variables                */
       NULL,
       0
     }
     mysql_declare_plugin_end;


File: manual.info,  Node: plugin-status-system-variables,  Next: client-plugin-descriptors,  Prev: server-plugin-descriptors,  Up: plugin-data-structures

23.2.4.4 Server Plugin Status and System Variables
..................................................

The server plugin interface enables plugins to expose status and system
variables using the `status_vars' and `system_vars' members of the
general plugin descriptor.

The `status_vars' member of the general plugin descriptor, if not 0,
points to an array of `st_mysql_show_var' structures, each of which
describes one status variable, followed by a structure with all members
set to 0. The `st_mysql_show_var' structure has this definition:

     struct st_mysql_show_var {
       const char *name;
       char *value;
       enum enum_mysql_show_type type;
     };

When the plugin is installed, the plugin name and the `name' value are
joined with an underscore to form the name displayed by *Note `SHOW
STATUS': show-status.

The following table shows the permissible status variable `type' values
and what the corresponding variable should be.

*Server Plugin Status Variable Types*

Variable Type          Meaning
`SHOW_BOOL'            Pointer to a boolean variable
`SHOW_INT'             Pointer to an integer variable
`SHOW_LONG'            Pointer to a long integer variable
`SHOW_LONGLONG'        Pointer to a longlong integer variable
`SHOW_CHAR'            A string
`SHOW_CHAR_PTR'        Pointer to a string
`SHOW_ARRAY'           Pointer to another `st_mysql_show_var' array
`SHOW_FUNC'            Pointer to a function
`SHOW_DOUBLE'          Pointer to a double

For the `SHOW_FUNC' type, the function is called and fills in its `out'
parameter, which then provides information about the variable to be
displayed. The function has this signature:

     #define SHOW_VAR_FUNC_BUFF_SIZE 1024

     typedef int (*mysql_show_var_func) (void *thd,
                                         struct st_mysql_show_var *out,
                                         char *buf);

The `system_vars' member, if not 0, points to an array of
`st_mysql_sys_var' structures, each of which describes one system
variable (which can also be set from the command-line or configuration
file), followed by a structure with all members set to 0. The
`st_mysql_sys_var' structure is defined as follows:

     struct st_mysql_sys_var {
      int flags;
      const char *name, *comment;
      int (*check)(THD*, struct st_mysql_sys_var *, void*, st_mysql_value*);
      void (*update)(THD*, struct st_mysql_sys_var *, void*, const void*);
     };

Additional fields are append as required depending upon the flags.

For convenience, a number of macros are defined that make creating new
system variables within a plugin much simpler.

Throughout the macros, the following fields are available:

   * `name': An unquoted identifier for the system variable.

   * `varname': The identifier for the static variable. Where not
     available, it is the same as the `name' field.

   * `opt': Additional use flags for the system variable. The following
     table shows the permissible flags.

     *Server Plugin System Variable Flags*

     Flag Value        Description
     `PLUGIN_VAR_READONLY'The system variable is read only
     `PLUGIN_VAR_NOSYSVAR'The system variable is not user visible at runtime
     `PLUGIN_VAR_NOCMDOPT'The system variable is not configurable from the
                       command line
     `PLUGIN_VAR_NOCMDARG'No argument is required at the command line
                       (typically used for boolean variables)
     `PLUGIN_VAR_RQCMDARG'An argument is required at the command line (this
                       is the default)
     `                 An argument is optional at the command line
     PLUGIN_VAR_OPCMDARG'
     `PLUGIN_VAR_MEMALLOC'Used for string variables; indicates that memory
                       is to be allocated for storage of the string

   * `comment': A descriptive comment to be displayed in the server
     help message.  `NULL' if this variable is to be hidden.

   * `check': The check function, `NULL' for default.

   * `update': The update function, `NULL' for default.

   * `default': The variable default value.

   * `minimum': The variable minimum value.

   * `maximum': The variable maximum value.

   * `blocksize': The variable block size.  When the value is set, it
     is rounded to the nearest multiple of `blocksize'.

A system variable may be accessed either by using the static variable
directly or by using the `SYSVAR()'accessor macro. The `SYSVAR()' macro
is provided for completeness. Usually it should be used only when the
code cannot directly access the underlying variable.

For example:

     static int my_foo;
     static MYSQL_SYSVAR_INT(foo_var, my_foo,
                             PLUGIN_VAR_RQCMDARG, "foo comment",
                             NULL, NULL, 0, 0, INT_MAX, 0);
      ...
        SYSVAR(foo_var)= value;
        value= SYSVAR(foo_var);
        my_foo= value;
        value= my_foo;

Session variables may be accessed only through the `THDVAR()' accessor
macro. For example:

     static MYSQL_THDVAR_BOOL(some_flag,
                              PLUGIN_VAR_NOCMDARG, "flag comment",
                              NULL, NULL, FALSE);
      ...
        if (THDVAR(thd, some_flag))
        {
          do_something();
          THDVAR(thd, some_flag)= FALSE;
        }

All global and session system variables must be published to *Note
`mysqld': mysqld. before use. This is done by constructing a
`NULL'-terminated array of the variables and linking to it in the
plugin public interface. For example:

     static struct st_mysql_sys_var *my_plugin_vars[]= {
       MYSQL_SYSVAR(foo_var),
       MYSQL_SYSVAR(some_flag),
       NULL
     };
     mysql_declare_plugin(fooplug)
     {
       MYSQL_..._PLUGIN,
       &plugin_data,
       "fooplug",
       "foo author",
       "This does foo!",
       PLUGIN_LICENSE_GPL,
       foo_init,
       foo_fini,
       0x0001,
       NULL,
       my_plugin_vars,
       NULL,
       0
     }
     mysql_declare_plugin_end;

The following convenience macros enable you to declare different types
of system variables:

   * Boolean system variables of type `my_bool', which is a 1-byte
     boolean.  (0 = FALSE, 1 = TRUE)

          MYSQL_THDVAR_BOOL(name, opt, comment, check, update, default)
          MYSQL_SYSVAR_BOOL(name, varname, opt, comment, check, update, default)

   * String system variables of type `char*', which is a pointer to a
     null-terminated string.

          MYSQL_THDVAR_STR(name, opt, comment, check, update, default)
          MYSQL_SYSVAR_STR(name, varname, opt, comment, check, update, default)

   * Integer system variables, of which there are several varieties.

        * An `int' system variable, which is typically a 4-byte signed
          word.

               MYSQL_THDVAR_INT(name, opt, comment, check, update, default, min, max, blk)
               MYSQL_SYSVAR_INT(name, varname, opt, comment, check, update, default,
                              minimum, maximum, blocksize)

        * An `unsigned int' system variable, which is typically a
          4-byte unsigned word.

               MYSQL_THDVAR_UINT(name, opt, comment, check, update, default, min, max, blk)
               MYSQL_SYSVAR_UINT(name, varname, opt, comment, check, update, default,
                               minimum, maximum, blocksize)

        * A `long' system variable, which is typically either a 4- or
          8-byte signed word.

               MYSQL_THDVAR_LONG(name, opt, comment, check, update, default, min, max, blk)
               MYSQL_SYSVAR_LONG(name, varname, opt, comment, check, update, default,
                               minimum, maximum, blocksize)

        * An `unsigned long' system variable, which is typically either
          a 4- or 8-byte unsigned word.

               MYSQL_THDVAR_ULONG(name, opt, comment, check, update, default, min, max, blk)
               MYSQL_SYSVAR_ULONG(name, varname, opt, comment, check, update, default,
                                minimum, maximum, blocksize)

        * A `long long' system variable, which is typically an 8-byte
          signed word.

               MYSQL_THDVAR_LONGLONG(name, opt, comment, check, update,
                                   default, minimum, maximum, blocksize)
               MYSQL_SYSVAR_LONGLONG(name, varname, opt, comment, check, update,
                                   default, minimum, maximum, blocksize)

        * An `unsigned long long' system variable, which is typically
          an 8-byte unsigned word.

               MYSQL_THDVAR_ULONGLONG(name, opt, comment, check, update,
                                    default, minimum, maximum, blocksize)
               MYSQL_SYSVAR_ULONGLONG(name, varname, opt, comment, check, update,
                                    default, minimum, maximum, blocksize)

        * An `unsigned long' system variable, which is typically either
          a 4- or 8-byte unsigned word. The range of possible values is
          an ordinal of the number of elements in the `typelib',
          starting from 0.

               MYSQL_THDVAR_ENUM(name, opt, comment, check, update, default, typelib)
               MYSQL_SYSVAR_ENUM(name, varname, opt, comment, check, update,
                               default, typelib)

        * An `unsigned long long' system variable, which is typically
          an 8-byte unsigned word. Each bit represents an element in the
          `typelib'.

               MYSQL_THDVAR_SET(name, opt, comment, check, update, default, typelib)
               MYSQL_SYSVAR_SET(name, varname, opt, comment, check, update,
                              default, typelib)

Internally, all mutable and plugin system variables are stored in a
`HASH' structure.

Display of the server command-line help text is handled by compiling a
`DYNAMIC_ARRAY' of all variables relevant to command-line options,
sorting them, and then iterating through them to display each option.

When a command-line option has been handled, it is then removed from
the `argv' by the `handle_option()' function (`my_getopt.c'); in
effect, it is consumed.

The server processes command-line options during the plugin
installation process, immediately after the plugin has been
successfully loaded but before the plugin initialization function has
been called

Plugins loaded at runtime do not benefit from any configuration options
and must have usable defaults. Once they are installed, they are loaded
at *Note `mysqld': mysqld. initialization time and configuration
options can be set at the command line or within `my.cnf'.

Plugins should consider the `thd' parameter to be read only.


File: manual.info,  Node: client-plugin-descriptors,  Prev: plugin-status-system-variables,  Up: plugin-data-structures

23.2.4.5 Client Plugin Descriptors
..................................

Each client plugin must have a descriptor that provides information to
the client plugin API. The descriptor structure begins with a fixed set
of members common to all client plugins, followed by any members
specific to the plugin type.

The `st_mysql_client_plugin' structure in the `client_plugin.h' file
defines a `generic' descriptor that contains the common members:

     struct st_mysql_client_plugin
     {
       int type;
       unsigned int interface_version;
       const char *name;
       const char *author;
       const char *desc;
       unsigned int version[3];
       const char *license;
       void *mysql_api;
       int (*init)(char *, size_t, int, va_list);
       int (*deinit)();
       int (*options)(const char *option, const void *);
     };

The common `st_mysql_client_plugin' descriptor structure members are
used as follows.  `char *' members should be specified as
null-terminated strings.

   * `type': The plugin type. This must be one of the plugin-type
     values from `client_plugin.h', such as
     `MYSQL_CLIENT_AUTHENTICATION_PLUGIN'.

   * `interface_version': The plugin interface version. For example,
     this is `MYSQL_CLIENT_AUTHENTICATION_PLUGIN_INTERFACE_VERSION' for
     an authentication plugin.

   * `name': A string that gives the plugin name. This is the name by
     which you refer to the plugin when you call *Note
     `mysql_options()': mysql-options. with the `MYSQL_DEFAULT_AUTH'
     option or specify the `--default-auth' option to a MySQL client
     program.

   * `author': A string naming the plugin author. This can be whatever
     you like.

   * `desc': A string that provides a general description of the
     plugin. This can be whatever you like.

   * `version': The plugin version as an array of three integers
     indicating the major, minor, and teeny versions. For example,
     `{1,2,3}' indicates version 1.2.3.

   * `license': A string that specifies the license type.

   * `mysql_api': For internal use. Specify it as `NULL' in the plugin
     descriptor.

   * `init': A once-only initialization function, or `NULL' if there is
     no such function. The client library executes this function when
     it loads the plugin. The function returns zero for success and
     nonzero for failure.

     The `init' function uses its first two arguments to return an
     error message if an error occurs.  The first argument is a pointer
     to a `char' buffer, and the second argument indicates the buffer
     length. Any message returned by the `init' function must be
     null-terminated, so the maximum message length is the buffer
     length minus one. The next arguments are passed to *Note
     `mysql_load_plugin()': mysql-load-plugin.  The first indicates how
     many more arguments there are (0 if none), followed by any
     remaining arguments.

   * `deinit': A once-only deinitialization function, or `NULL' if
     there is no such function. The client library executes this
     function when it unloads the plugin. The function takes no
     arguments.  It returns zero for success and nonzero for failure.

   * `options': A function for handling options passed to the plugin,
     or `NULL' if there is no such function. The function takes two
     arguments representing the option name and a pointer to its value.

For a given client plugin type, the common descriptor members may be
followed by additional members necessary to implement plugins of that
type. For example, the `st_mysql_client_plugin_AUTHENTICATION'
structure for authentication plugins has a function at the end that the
client library calls to perform authentication.

To declare a plugin, use the `mysql_declare_client_plugin()' and
`mysql_end_client_plugin' macros:

     mysql_declare_client_plugin(PLUGIN_TYPE)
        ... MEMBERS COMMON TO ALL CLIENT PLUGINS ...
        ... TYPE-SPECIFIC EXTRA MEMBERS ...
     mysql_end_client_plugin;

Do not specify the `type' or `interface_version' member explicitly. The
`mysql_declare_client_plugin()' macro uses the PLUGIN_TYPE argument to
generate their values automatically. For example, declare an
authentication client plugin like this:

     mysql_declare_client_plugin(AUTHENTICATION)
       "my_auth_plugin",
       "Author Name",
       "My Client Authentication Plugin",
       {1,0,0},
       "GPL",
       NULL,
       my_auth_init,
       my_auth_deinit,
       my_auth_options,
       my_auth_main
     mysql_end_client_plugin;

This declaration uses the `AUTHENTICATION' argument to set the `type'
and `interface_version' members to `MYSQL_CLIENT_AUTHENTICATION_PLUGIN'
and `MYSQL_CLIENT_AUTHENTICATION_PLUGIN_INTERFACE_VERSION'.

Depending on the plugin type, the descriptor may have other members
following the common members. For example, for an authentication
plugin, there is a function (`my_auth_main()' in the descriptor just
shown) that handles communication with the server. See *Note
writing-authentication-plugins::.

Normally, a client program that supports the use of authentication
plugins causes a plugin to be loaded by calling *Note
`mysql_options()': mysql-options. to set the `MYSQL_DEFAULT_AUTH' and
`MYSQL_PLUGIN_DIR' options:

     char *plugin_dir = "PATH_TO_PLUGIN_DIR";
     char *default_auth = "PLUGIN_NAME";

     /* ... process command-line options ... */

     mysql_options(&mysql, MYSQL_PLUGIN_DIR, plugin_dir);
     mysql_options(&mysql, MYSQL_DEFAULT_AUTH, default_auth);

Typically, the program will also accept `--plugin-dir' and
`--default-auth' options that enable users to override the default
values.

Should a client program require lower-level plugin management, the
client library contains functions that take an `st_mysql_client_plugin'
argument. See *Note c-api-plugin-functions::.


File: manual.info,  Node: compiling-plugin-libraries,  Next: writing-full-text-plugins,  Prev: plugin-data-structures,  Up: writing-plugins

23.2.4.6 Compiling and Installing Plugin Libraries
..................................................

After your plugin is written, you must compile it and install it. The
procedure for compiling shared objects varies from system to system. If
you build your library using `CMake', it should be able to generate the
correct compilation commands for your system. If the library is named
`somepluglib', you should end up with a shared object file that has a
name something like `somepluglib.so'. (The file name might have a
different suffix on your system.)

To use `CMake', you'll need to set up the configuration files to enable
the plugin to be compiled and installed. Use the plugin examples under
the `plugin' directory of a MySQL source distribution as a guide.

Create `CMakeLists.txt', which should look something like this:

     MYSQL_ADD_PLUGIN(somepluglib somepluglib.c
       MODULE_ONLY MODULE_OUTPUT_NAME "somepluglib")

When `CMake' generates the `Makefile', it should take care of passing
to the compilation command the `-DMYSQL_DYNAMIC_PLUGIN' flag, and
passing to the linker the `-lmysqlservices' flag, which is needed to
link in any functions from services provided through the plugin
services interface. See *Note plugin-services::.

Run `CMake', then run `make':

     shell> cmake .
     shell> make

If you need to specify configuration options to `CMake', see *Note
source-configuration-options::, for a list.  For example, you might
want to specify `CMAKE_INSTALL_PREFIX' to indicate the MySQL base
directory under which the plugin should be installed. You can see what
value to use for this option with *Note `SHOW VARIABLES':
show-variables.:

     mysql> SHOW VARIABLES LIKE 'basedir';
     +---------------+------------------+
     | Variable_name | Value            |
     +---------------+------------------+
     | base          | /usr/local/mysql |
     +---------------+------------------+

The location of the plugin directory where you should install the
library is given by the `plugin_dir' system variable.  For example:

     mysql> SHOW VARIABLES LIKE 'plugin_dir';
     +---------------+-----------------------------------+
     | Variable_name | Value                             |
     +---------------+-----------------------------------+
     | plugin_dir    | /usr/local/mysql/lib/mysql/plugin |
     +---------------+-----------------------------------+

To install the plugin library, use `make':

     shell> make install

Verify that `make install' installed the plugin library in the proper
directory. After installing it, make sure that the library permissions
permit it to be executed by the server.


File: manual.info,  Node: writing-full-text-plugins,  Next: writing-daemon-plugins,  Prev: compiling-plugin-libraries,  Up: writing-plugins

23.2.4.7 Writing Full-Text Parser Plugins
.........................................

A full-text parser server plugin can be used to replace or modify the
built-in full-text parser. This section describes how to write a
full-text parser plugin named `simple_parser'. This plugin performs
parsing based on simpler rules than those used by the MySQL built-in
full-text parser: Words are nonempty runs of whitespace characters.

The instructions use the source code in the `plugin/fulltext' directory
of MySQL source distributions, so change location into that directory.
The following procedure describes how the plugin library is created:

  1. To write a full-text parser plugin, include the following header
     file in the plugin source file. Other MySQL or general header
     files might also be needed.

          #include <mysql/plugin.h>

     `plugin.h' defines the `MYSQL_FTPARSER_PLUGIN' server plugin type
     and the data structures needed to declare the plugin.

  2. Set up the library descriptor for the plugin library file.

     This descriptor contains the general plugin descriptor for the
     server plugin. For a full-text parser plugin, the type must be
     `MYSQL_FTPARSER_PLUGIN'. This is the value that identifies the
     plugin as being legal for use in a `WITH PARSER' clause when
     creating a `FULLTEXT' index. (No other plugin type is legal for
     this clause.)

     For example, the library descriptor for a library that contains a
     single full-text parser plugin named `simple_parser' looks like
     this:

          mysql_declare_plugin(ftexample)
          {
            MYSQL_FTPARSER_PLUGIN,      /* type                            */
            &simple_parser_descriptor,  /* descriptor                      */
            "simple_parser",            /* name                            */
            "Oracle Corporation",       /* author                          */
            "Simple Full-Text Parser",  /* description                     */
            PLUGIN_LICENSE_GPL,         /* plugin license                  */
            simple_parser_plugin_init,  /* init function (when loaded)     */
            simple_parser_plugin_deinit,/* deinit function (when unloaded) */
            0x0001,                     /* version                         */
            simple_status,              /* status variables                */
            simple_system_variables,    /* system variables                */
            NULL,
            0
          }
          mysql_declare_plugin_end;

     The `name' member (`simple_parser') indicates the name to use for
     references to the plugin in statements such as *Note `INSTALL
     PLUGIN': install-plugin. or *Note `UNINSTALL PLUGIN':
     uninstall-plugin. This is also the name displayed by *Note `SHOW
     PLUGINS': show-plugins. or *Note `INFORMATION_SCHEMA.PLUGINS':
     plugins-table.

     For more information, see *Note server-plugin-descriptors::.

  3. Set up the type-specific plugin descriptor.

     Each general plugin descriptor in the library descriptor points to
     a type-specific descriptor. For a full-text parser plugin, the
     type-specific descriptor is an instance of the `st_mysql_ftparser'
     structure in the `plugin.h' file:

          struct st_mysql_ftparser
          {
            int interface_version;
            int (*parse)(MYSQL_FTPARSER_PARAM *param);
            int (*init)(MYSQL_FTPARSER_PARAM *param);
            int (*deinit)(MYSQL_FTPARSER_PARAM *param);
          };

     As shown by the structure definition, the descriptor has an
     interface version number and contains pointers to three functions.
     The version is specified using a symbol of the form
     `MYSQL_XXX_INTERFACE_VERSION' (such as
     (`MYSQL_FTPARSER_INTERFACE_VERSION' for full-text parser plugins)
     The `init' and `deinit' members should point to a function or be
     set to 0 if the function is not needed. The `parse' member must
     point to the function that performs the parsing.

     In the `simple_parser' declaration, that descriptor is indicated by
     `&simple_parser_descriptor'. The descriptor specifies the version
     number for the full-text plugin interface (as given by
     `MYSQL_FTPARSER_INTERFACE_VERSION'), and the plugin's parsing,
     initialization, and deinitialization functions:

          static struct st_mysql_ftparser simple_parser_descriptor=
          {
            MYSQL_FTPARSER_INTERFACE_VERSION, /* interface version      */
            simple_parser_parse,              /* parsing function       */
            simple_parser_init,               /* parser init function   */
            simple_parser_deinit              /* parser deinit function */
          };

     A full-text parser plugin is used in two different contexts,
     indexing and searching. In both contexts, the server calls the
     initialization and deinitialization functions at the beginning and
     end of processing each SQL statement that causes the plugin to be
     invoked. However, during statement processing, the server calls
     the main parsing function in context-specific fashion:

        * For indexing, the server calls the parser for each column
          value to be indexed.

        * For searching, the server calls the parser to parse the
          search string. The parser might also be called for rows
          processed by the statement. In natural language mode, there
          is no need for the server to call the parser. For boolean
          mode phrase searches or natural language searches with query
          expansion, the parser is used to parse column values for
          information that is not in the index. Also, if a boolean mode
          search is done for a column that has no `FULLTEXT' index, the
          built-in parser will be called. (Plugins are associated with
          specific indexes. If there is no index, no plugin is used.)

     The plugin declaration in the general plugin descriptor has `init'
     and `deinit' members that point initialization and deinitialization
     functions, and so does the type-specific plugin descriptor to
     which it points. However, these pairs of functions have different
     purposes and are invoked for different reasons:

        * For the plugin declaration in the general plugin descriptor,
          the initialization and deinitialization functions are invoked
          when the plugin is loaded and unloaded.

        * For the type-specific plugin descriptor, the initialization
          and deinitialization functions are invoked per SQL statement
          for which the plugin is used.

     Each interface function named in the plugin descriptor should
     return zero for success or nonzero for failure, and each of them
     receives an argument that points to a `MYSQL_FTPARSER_PARAM'
     structure containing the parsing context. The structure has this
     definition:

          typedef struct st_mysql_ftparser_param
          {
            int (*mysql_parse)(struct st_mysql_ftparser_param *,
                               char *doc, int doc_len);
            int (*mysql_add_word)(struct st_mysql_ftparser_param *,
                                  char *word, int word_len,
                                  MYSQL_FTPARSER_BOOLEAN_INFO *boolean_info);
            void *ftparser_state;
            void *mysql_ftparam;
            struct charset_info_st *cs;
            char *doc;
            int length;
            int flags;
            enum enum_ftparser_mode mode;
          } MYSQL_FTPARSER_PARAM;

     The structure members are used as follows:

        * `mysql_parse': A pointer to a callback function that invokes
          the server's built-in parser. Use this callback when the
          plugin acts as a front end to the built-in parser. That is,
          when the plugin parsing function is called, it should process
          the input to extract the text and pass the text to the
          `mysql_parse' callback.

          The first parameter for this callback function should be the
          `param' value itself:

               param->mysql_parse(param, ...);

          A front end plugin can extract text and pass it all at once
          to the built-in parser, or it can extract and pass text to
          the built-in parser a piece at a time.  However, in this
          case, the built-in parser treats the pieces of text as though
          there are implicit word breaks between them.

        * `mysql_add_word': A pointer to a callback function that adds
          a word to a full-text index or to the list of search terms.
          Use this callback when the parser plugin replaces the built-in
          parser. That is, when the plugin parsing function is called,
          it should parse the input into words and invoke the
          `mysql_add_word' callback for each word.

          The first parameter for this callback function should be the
          `param' value itself:

               param->mysql_add_word(param, ...);

        * `ftparser_state': This is a generic pointer. The plugin can
          set it to point to information to be used internally for its
          own purposes.

        * `mysql_ftparam': This is set by the server. It is passed as
          the first argument to the `mysql_parse' or `mysql_add_word'
          callback.

        * `cs': A pointer to information about the character set of the
          text, or 0 if no information is available.

        * `doc': A pointer to the text to be parsed.

        * `length': The length of the text to be parsed, in bytes.

        * `flags': Parser flags. This is zero if there are no special
          flags. Currently, the only nonzero flag is
          `MYSQL_FTFLAGS_NEED_COPY', which means that
          `mysql_add_word()' must save a copy of the word (that is, it
          cannot use a pointer to the word because the word is in a
          buffer that will be overwritten.) This member was added in
          MySQL 5.1.12.

          This flag might be set or reset by MySQL before calling the
          parser plugin, by the parser plugin itself, or by the
          `mysql_parse()' function.

        * `mode': The parsing mode. This value will be one of the
          following constants:

             * `MYSQL_FTPARSER_SIMPLE_MODE': Parse in fast and simple
               mode, which is used for indexing and for natural
               language queries. The parser should pass to the server
               only those words that should be indexed. If the parser
               uses length limits or a stopword list to determine which
               words to ignore, it should not pass such words to the
               server.

             * `MYSQL_FTPARSER_WITH_STOPWORDS': Parse in stopword mode.
               This is used in boolean searches for phrase matching.
               The parser should pass all words to the server, even
               stopwords or words that are outside any normal length
               limits.

             * `MYSQL_FTPARSER_FULL_BOOLEAN_INFO': Parse in boolean
               mode. This is used for parsing boolean query strings.
               The parser should recognize not only words but also
               boolean-mode operators and pass them to the server as
               tokens using the `mysql_add_word' callback. To tell the
               server what kind of token is being passed, the plugin
               needs to fill in a `MYSQL_FTPARSER_BOOLEAN_INFO'
               structure and pass a pointer to it.

     If the parser is called in boolean mode, the `param->mode' value
     will be `MYSQL_FTPARSER_FULL_BOOLEAN_INFO'. The
     `MYSQL_FTPARSER_BOOLEAN_INFO' structure that the parser uses for
     passing token information to the server looks like this:

          typedef struct st_mysql_ftparser_boolean_info
          {
            enum enum_ft_token_type type;
            int yesno;
            int weight_adjust;
            bool wasign;
            bool trunc;
            /* These are parser state and must be removed. */
            byte prev;
            byte *quot;
          } MYSQL_FTPARSER_BOOLEAN_INFO;

     The parser should fill in the structure members as follows:

        * `type': The token type. The following table shows the
          permissible types.

          *Full-Text Parser Token Types*

          Token Value               Meaning
          `FT_TOKEN_EOF'            End of data
          `FT_TOKEN_WORD'           A regular word
          `FT_TOKEN_LEFT_PAREN'     The beginning of a group or
                                    subexpression
          `FT_TOKEN_RIGHT_PAREN'    The end of a group or subexpression
          `FT_TOKEN_STOPWORD'       A stopword

        * `yesno': Whether the word must be present for a match to
          occur. 0 means that the word is optional but increases the
          match relevance if it is present. Values larger than 0 mean
          that the word must be present. Values smaller than 0 mean
          that the word must not be present.

        * `weight_adjust': A weighting factor that determines how much
          a match for the word counts.  It can be used to increase or
          decrease the word's importance in relevance calculations. A
          value of zero indicates no weight adjustment. Values greater
          than or less than zero mean higher or lower weight,
          respectively. The examples at *Note fulltext-boolean::, that
          use the `<' and `>' operators illustrate how weighting works.

        * `wasign': The sign of the weighting factor. A negative value
          acts like the `~' boolean-search operator, which causes the
          word's contribution to the relevance to be negative.

        * `trunc': Whether matching should be done as if the
          boolean-mode `*' truncation operator had been given.

     Plugins should not use the `prev' and `quot' members of the
     `MYSQL_FTPARSER_BOOLEAN_INFO' structure.

  4. Set up the plugin interface functions.

     The general plugin descriptor in the library descriptor names the
     initialization and deinitialization functions that the server
     should invoke when it loads and unloads the plugin. For
     `simple_parser', these functions do nothing but return zero to
     indicate that they succeeded:

          static int simple_parser_plugin_init(void *arg __attribute__((unused)))
          {
            return(0);
          }

          static int simple_parser_plugin_deinit(void *arg __attribute__((unused)))
          {
            return(0);
          }

     Because those functions do not actually do anything, you could
     omit them and specify 0 for each of them in the plugin declaration.

     The type-specific plugin descriptor for `simple_parser' names the
     initialization, deinitialization, and parsing functions that the
     server invokes when the plugin is used. For `simple_parser', the
     initialization and deinitialization functions do nothing:

          static int simple_parser_init(MYSQL_FTPARSER_PARAM *param
                                        __attribute__((unused)))
          {
            return(0);
          }

          static int simple_parser_deinit(MYSQL_FTPARSER_PARAM *param
                                          __attribute__((unused)))
          {
            return(0);
          }

     Here too, because those functions do nothing, you could omit them
     and specify 0 for each of them in the plugin descriptor.

     The main parsing function, `simple_parser_parse()', acts as a
     replacement for the built-in full-text parser, so it needs to
     split text into words and pass each word to the server.  The
     parsing function's first argument is a pointer to a structure that
     contains the parsing context. This structure has a `doc' member
     that points to the text to be parsed, and a `length' member that
     indicates how long the text is. The simple parsing done by the
     plugin considers nonempty runs of whitespace characters to be
     words, so it identifies words like this:

          static int simple_parser_parse(MYSQL_FTPARSER_PARAM *param)
          {
            char *end, *start, *docend= param->doc + param->length;

            for (end= start= param->doc;; end++)
            {
              if (end == docend)
              {
                if (end > start)
                  add_word(param, start, end - start);
                break;
              }
              else if (isspace(*end))
              {
                if (end > start)
                  add_word(param, start, end - start);
                start= end + 1;
              }
            }
            return(0);
          }

     As the parser finds each word, it invokes a function `add_word()'
     to pass the word to the server. `add_word()' is a helper function
     only; it is not part of the plugin interface. The parser passes
     the parsing context pointer to `add_word()', as well as a pointer
     to the word and a length value:

          static void add_word(MYSQL_FTPARSER_PARAM *param, char *word, size_t len)
          {
            MYSQL_FTPARSER_BOOLEAN_INFO bool_info=
              { FT_TOKEN_WORD, 0, 0, 0, 0, ' ', 0 };

            param->mysql_add_word(param, word, len, &bool_info);
          }

     For boolean-mode parsing, `add_word()' fills in the members of the
     `bool_info' structure as described earlier in the discussion of the
     `st_mysql_ftparser_boolean_info' structure.

  5. Set up the status variables. For the `simple_parser' plugin, the
     following status variable array sets up one status variable with a
     value that is static text, and another with a value that is stored
     in a long integer variable:

          long number_of_calls= 0;

          struct st_mysql_show_var simple_status[]=
          {
            {"static", (char *)"just a static text", SHOW_CHAR},
            {"called", (char *)&number_of_calls,     SHOW_LONG},
            {0,0,0}
          };

     When the plugin is installed, the plugin name and the `name' value
     are joined with an underscore to form the name displayed by *Note
     `SHOW STATUS': show-status. For the array just shown, the
     resulting status variable names are `simple_parser_static' and
     `simple_parser_called'. This convention means that you can easily
     display the variables for a plugin using its name:

          mysql> SHOW STATUS LIKE 'simple_parser%';
          +----------------------+--------------------+
          | Variable_name        | Value              |
          +----------------------+--------------------+
          | simple_parser_static | just a static text |
          | simple_parser_called | 0                  |
          +----------------------+--------------------+

  6. To compile and install a plugin library object file, use the
     instructions in *Note compiling-plugin-libraries::. To use the
     library file, it must be installed in the plugin directory (the
     directory named by the `plugin_dir' system variable). For the
     `simple_parser' plugin, it is compiled and installed when you
     build MySQL from source. It is also included in binary
     distributions.  The build process produces a shared object library
     with a name of `mypluglib.so' (the suffix might differ depending
     on your platform).

  7. To use the plugin, register it with the server. For example, to
     register the plugin at runtime, use this statement (changing the
     suffix as necessary):

          mysql> INSTALL PLUGIN simple_parser SONAME 'mypluglib.so';

     For additional information about plugin loading, see *Note
     server-plugin-loading::.

  8. To verify plugin installation, examine the *Note
     `INFORMATION_SCHEMA.PLUGINS': plugins-table.  table or use the
     *Note `SHOW PLUGINS': show-plugins. statement.

  9. Test the plugin to verify that it works properly.

     Create a table that contains a string column and associate the
     parser plugin with a `FULLTEXT' index on the column:

          mysql> CREATE TABLE t (c VARCHAR(255),
              ->   FULLTEXT (c) WITH PARSER simple_parser
              -> ) ENGINE=MyISAM;
          Query OK, 0 rows affected (0.01 sec)

     Insert some text into the table and try some searches.  These
     should verify that the parser plugin treats all nonwhitespace
     characters as word characters:

          mysql> INSERT INTO t VALUES
              ->   ('latin1_general_cs is a case-sensitive collation'),
              ->   ('I\'d like a case of oranges'),
              ->   ('this is sensitive information'),
              ->   ('another row'),
              ->   ('yet another row');
          Query OK, 5 rows affected (0.02 sec)
          Records: 5  Duplicates: 0  Warnings: 0

          mysql> SELECT c FROM t;
          +-------------------------------------------------+
          | c                                               |
          +-------------------------------------------------+
          | latin1_general_cs is a case-sensitive collation |
          | I'd like a case of oranges                      |
          | this is sensitive information                   |
          | another row                                     |
          | yet another row                                 |
          +-------------------------------------------------+
          5 rows in set (0.00 sec)

          mysql> SELECT MATCH(c) AGAINST('case') FROM t;
          +--------------------------+
          | MATCH(c) AGAINST('case') |
          +--------------------------+
          |                        0 |
          |          1.2968142032623 |
          |                        0 |
          |                        0 |
          |                        0 |
          +--------------------------+
          5 rows in set (0.00 sec)

          mysql> SELECT MATCH(c) AGAINST('sensitive') FROM t;
          +-------------------------------+
          | MATCH(c) AGAINST('sensitive') |
          +-------------------------------+
          |                             0 |
          |                             0 |
          |               1.3253291845322 |
          |                             0 |
          |                             0 |
          +-------------------------------+
          5 rows in set (0.01 sec)

          mysql> SELECT MATCH(c) AGAINST('case-sensitive') FROM t;
          +------------------------------------+
          | MATCH(c) AGAINST('case-sensitive') |
          +------------------------------------+
          |                    1.3109166622162 |
          |                                  0 |
          |                                  0 |
          |                                  0 |
          |                                  0 |
          +------------------------------------+
          5 rows in set (0.01 sec)

          mysql> SELECT MATCH(c) AGAINST('I\'d') FROM t;
          +--------------------------+
          | MATCH(c) AGAINST('I\'d') |
          +--------------------------+
          |                        0 |
          |          1.2968142032623 |
          |                        0 |
          |                        0 |
          |                        0 |
          +--------------------------+
          5 rows in set (0.01 sec)

     Note how neither `case' nor `insensitive' match `case-insensitive'
     the way that they would for the built-in parser.


File: manual.info,  Node: writing-daemon-plugins,  Next: writing-information-schema-plugins,  Prev: writing-full-text-plugins,  Up: writing-plugins

23.2.4.8 Writing Daemon Plugins
...............................

A daemon plugin is a simple type of plugin used for code that should be
run by the server but that does not communicate with it. This section
describes how to write a daemon server plugin, using the example plugin
found in the `plugin/daemon_example' directory of MySQL source
distributions. That directory contains the `daemon_example.cc' source
file for a daemon plugin named `daemon_example' that writes a heartbeat
string at regular intervals to a file named `mysql-heartbeat.log' in
the data directory.

To write a daemon plugin, include the following header file in the
plugin source file. Other MySQL or general header files might also be
needed.

     #include <mysql/plugin.h>

`plugin.h' defines the `MYSQL_DAEMON_PLUGIN' server plugin type and the
data structures needed to declare the plugin.

The `daemon_example.cc' file sets up the library descriptor as follows.
The library descriptor includes a single general server plugin
descriptor.

     mysql_declare_plugin(daemon_example)
     {
       MYSQL_DAEMON_PLUGIN,
       &daemon_example_plugin,
       "daemon_example",
       "Brian Aker",
       "Daemon example, creates a heartbeat beat file in mysql-heartbeat.log",
       PLUGIN_LICENSE_GPL,
       daemon_example_plugin_init, /* Plugin Init */
       daemon_example_plugin_deinit, /* Plugin Deinit */
       0x0100 /* 1.0 */,
       NULL,                       /* status variables                */
       NULL,                       /* system variables                */
       NULL,                       /* config options                  */
       0,                          /* flags                           */
     }
     mysql_declare_plugin_end;

The `name' member (`daemon_example') indicates the name to use for
references to the plugin in statements such as *Note `INSTALL PLUGIN':
install-plugin. or *Note `UNINSTALL PLUGIN': uninstall-plugin. This is
also the name displayed by *Note `SHOW PLUGINS': show-plugins. or *Note
`INFORMATION_SCHEMA.PLUGINS': plugins-table.

The second member of the plugin descriptor, `daemon_example_plugin',
points to the type-specific daemon plugin descriptor. This structure
consists only of the type-specific API version number:

     struct st_mysql_daemon daemon_example_plugin=
     { MYSQL_DAEMON_INTERFACE_VERSION  };

The type-specific structure has no interface functions. There is no
communication between the server and the plugin, except that the server
calls the initialization and deinitialization functions from the
general plugin descriptor to start and stop the plugin:

   * `daemon_example_plugin_init()' opens the heartbeat file and spawns
     a thread that wakes up periodically and writes the next message to
     the file.

   * `daemon_example_plugin_deinit()' closes the file and performs
     other cleanup.

To compile and install a plugin library object file, use the
instructions in *Note compiling-plugin-libraries::.  To use the library
file, it must be installed in the plugin directory (the directory named
by the `plugin_dir' system variable).  For the `daemon_example' plugin,
it is compiled and installed when you build MySQL from source. It is
also included in binary distributions. The build process produces a
shared object library with a name of `libdaemon_example.so' (the suffix
might differ depending on your platform).

To use the plugin, register it with the server. For example, to
register the plugin at runtime, use this statement (change the suffix
as necessary):

     mysql> INSTALL PLUGIN daemon_example SONAME 'libdaemon_example.so';

For additional information about plugin loading, see *Note
server-plugin-loading::.

To verify plugin installation, examine the *Note
`INFORMATION_SCHEMA.PLUGINS': plugins-table. table or use the *Note
`SHOW PLUGINS': show-plugins.  statement.

While the plugin is loaded, it writes a heartbeat string at regular
intervals to a file named `mysql-heartbeat.log' in the data directory.
This file grows without limit, so after you have satistifed yourself
that the plugin operates correctly, unload it:

     mysql> UNINSTALL PLUGIN daemon_example;


File: manual.info,  Node: writing-information-schema-plugins,  Next: writing-semisynchronous-replication-plugins,  Prev: writing-daemon-plugins,  Up: writing-plugins

23.2.4.9 Writing `INFORMATION_SCHEMA' Plugins
.............................................

This section describes how to write an `INFORMATION_SCHEMA' table
server plugin. For example code that implements such plugins, see the
`sql/sql_show.cc' file of a MySQL source distribution. You can also
look at the example plugins found in the `InnoDB' source. See the
`handler/i_s.cc' and `handler/ha_innodb.cc' files within the `InnoDB'
source tree (in the `storage/innobase' directory).

To write an `INFORMATION_SCHEMA' table plugin, include the following
header files in the plugin source file. Other MySQL or general header
files might also be needed.

     #include <sql_class.h>
     #include <table.h>

These header files are located in the `sql' directory of MySQL source
distributions. They contain C++ structures, so the source file for an
`INFORMATION_SCHEMA' plugin must be compiled as C++ (not C) code.

The source file for the example plugin developed here is named
`simple_i_s_table.cc'. It creates a simple `INFORMATION_SCHEMA' table
named `SIMPLE_I_S_TABLE' that has two columns named `NAME' and `VALUE'.
The general descriptor for a plugin library that implements the table
looks like this:

     mysql_declare_plugin(simple_i_s_library)
     {
       MYSQL_INFORMATION_SCHEMA_PLUGIN,
       &simple_table_info,                /* type-specific descriptor */
       "SIMPLE_I_S_TABLE",                /* table name */
       "Author Name",                     /* author */
       "Simple INFORMATION_SCHEMA table", /* description */
       PLUGIN_LICENSE_GPL,                /* license type */
       simple_table_init,                 /* init function */
       NULL,
       0x0100,                            /* version = 1.0 */
       NULL,                              /* no status variables */
       NULL,                              /* no system variables */
       NULL,                              /* no reserved information */
       0                                  /* no flags */
     }
     mysql_declare_plugin_end;

The `name' member (`SIMPLE_I_S_TABLE') indicates the name to use for
references to the plugin in statements such as *Note `INSTALL PLUGIN':
install-plugin. or *Note `UNINSTALL PLUGIN': uninstall-plugin. This is
also the name displayed by *Note `SHOW PLUGINS': show-plugins. or *Note
`INFORMATION_SCHEMA.PLUGINS': plugins-table.

The `simple_table_info' member of the general descriptor points to the
type-specific descriptor, which consists only of the type-specific API
version number:

     static struct st_mysql_information_schema simple_table_info =
     { MYSQL_INFORMATION_SCHEMA_INTERFACE_VERSION };

The general descriptor points to the initialization and
deinitialization functions:

   * The initialization function provides information about the table
     structure and a function that populates the table.

   * The deinitialization function performs any required cleanup. If no
     cleanup is needed, this descriptor member can be `NULL' (as in the
     example shown).

The initialization function should return 0 for success, 1 if an error
occurs. The function receives a generic pointer, which it should
interpret as a pointer to the table structure:

     static int table_init(void *ptr)
     {
       ST_SCHEMA_TABLE *schema_table= (ST_SCHEMA_TABLE*)ptr;

       schema_table->fields_info= simple_table_fields;
       schema_table->fill_table= simple_fill_table;
       return 0;
     }

The function should set these two members of the table structure:

   * `fields_info': An array of `ST_FIELD_INFO' structures that contain
     information about each column.

   * `fill_table': A function that populates the table.

The array pointed to by `fields_info' should contain one element per
column of the `INFORMATION_SCHEMA' plus a terminating element. The
following `simple_table_fields' array for the example plugin indicates
that `SIMPLE_I_S_TABLE' has two columns.  `NAME' is string-valued with
a length of 10 and `VALUE' is integer-valued with a display width of
20. The last structure marks the end of the array.

     static ST_FIELD_INFO simple_table_fields[]=
     {
       {"NAME", 10, MYSQL_TYPE_STRING, 0, 0 0, 0},
       {"VALUE", 6, MYSQL_TYPE_LONG, 0, MY_I_S_UNSIGNED, 0, 0},
       {0, 0, MYSQL_TYPE_NULL, 0, 0, 0, 0}
     };

For more information about the column information structure, see the
definition of `ST_FIELD_INFO' in the `table.h' header file. The
permissible `MYSQL_TYPE_XXX' type values are those used in the C API;
see *Note c-api-data-structures::.

The `fill_table' member should be set to a function that populates the
table and returns 0 for success, 1 if an error occurs. For the example
plugin, the `simple_fill_table()' function looks like this:

     static int simple_fill_table(THD *thd, TABLE_LIST *tables, COND *cond)
     {
       TABLE *table= tables->table;

       table->field[0]->store("Name 1", 6, system_charset_info);
       table->field[1]->store(1);
       if (schema_table_store_record(thd, table))
         return 1;
       table->field[0]->store("Name 2", 6, system_charset_info);
       table->field[1]->store(2);
       if (schema_table_store_record(thd, table))
         return 1;
       return 0;
     }

For each row of the `INFORMATION_SCHEMA' table, this function
initializes each column, then calls `schema_table_store_record()' to
install the row. The `store()' method arguments depend on the type of
value to be stored. For column 0 (`NAME', a string), `store()' takes a
pointer to a string, its length, and information about the character
set of the string:

     store(const char *to, uint length, CHARSET_INFO *cs);

For column 1 (`VALUE', an integer), `store()' takes the value and a flag
indicating whether it is unsigned:

     store(longlong nr, bool unsigned_value);

For other examples of how to populate `INFORMATION_SCHEMA' tables,
search for instances of `schema_table_store_record()' in `sql_show.cc'.

To compile and install a plugin library object file, see the
instructions in *Note compiling-plugin-libraries::.  To use the library
file, it must be installed in the plugin directory (the directory named
by the `plugin_dir' system variable).

To test the plugin, install it:

     mysql> INSTALL PLUGIN SIMPLE_I_S_TABLE SONAME 'simple_i_s_table.so';

Verify that the table is present:

     mysql> SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES
         -> WHERE TABLE_NAME = 'SIMPLE_I_S_TABLE';
     +------------------+
     | TABLE_NAME       |
     +------------------+
     | SIMPLE_I_S_TABLE |
     +------------------+

Try to select from it:

     mysql> SELECT * FROM INFORMATION_SCHEMA.SIMPLE_I_S_TABLE;
     +--------+-------+
     | NAME   | VALUE |
     +--------+-------+
     | Name 1 |     1 |
     | Name 2 |     2 |
     +--------+-------+

Uninstall it:

     mysql> UNINSTALL PLUGIN SIMPLE_I_S_TABLE;


File: manual.info,  Node: writing-semisynchronous-replication-plugins,  Next: writing-audit-plugins,  Prev: writing-information-schema-plugins,  Up: writing-plugins

23.2.4.10 Writing Semisynchronous Replication Plugins
.....................................................

This section describes how to write semisynchronous replication server
plugins, using the example plugins found in the `plugin/semisync'
directory of MySQL source distributions. That directory contains the
source files for master and slave plugins named `rpl_semi_sync_master'
and `rpl_semi_sync_slave'. The information here covers only how to set
up the plugin framework. For details about how the plugins implement
replication functions, see the source.

To write a semisynchronous replication plugin, include the following
header file in the plugin source file. Other MySQL or general header
files might also be needed.

     #include <mysql/plugin.h>

`plugin.h' defines the `MYSQL_REPLICATION_PLUGIN' server plugin type
and the data structures needed to declare the plugin.

For the master side, `semisync_master_plugin.cc' contains this general
descriptor for a plugin named `rpl_semi_sync_master':

     mysql_declare_plugin(semi_sync_master)
     {
       MYSQL_REPLICATION_PLUGIN,
       &semi_sync_master_plugin,
       "rpl_semi_sync_master",
       "He Zhenxing",
       "Semi-synchronous replication master",
       PLUGIN_LICENSE_GPL,
       semi_sync_master_plugin_init, /* Plugin Init */
       semi_sync_master_plugin_deinit, /* Plugin Deinit */
       0x0100 /* 1.0 */,
       semi_sync_master_status_vars, /* status variables */
       semi_sync_master_system_vars, /* system variables */
       NULL,                         /* config options */
       0,                            /* flags */
     }
     mysql_declare_plugin_end;

For the slave side, `semisync_slave_plugin.cc' contains this general
descriptor for a plugin named `rpl_semi_sync_slave':

     mysql_declare_plugin(semi_sync_slave)
     {
       MYSQL_REPLICATION_PLUGIN,
       &semi_sync_slave_plugin,
       "rpl_semi_sync_slave",
       "He Zhenxing",
       "Semi-synchronous replication slave",
       PLUGIN_LICENSE_GPL,
       semi_sync_slave_plugin_init, /* Plugin Init */
       semi_sync_slave_plugin_deinit, /* Plugin Deinit */
       0x0100 /* 1.0 */,
       semi_sync_slave_status_vars,  /* status variables */
       semi_sync_slave_system_vars,  /* system variables */
       NULL,                         /* config options */
       0,                            /* flags */
     }
     mysql_declare_plugin_end;

For both the master and slave plugins, the general descriptor has
pointers to the type-specific descriptor, the initialization and
deinitialization functions, and to the status and system variables
implemented by the plugin. For information about variable setup, see
*Note plugin-status-system-variables::. The following remarks discuss
the type-specific descriptor and the initialization and
deinitialization functions for the master plugin but apply similarly to
the slave plugin.

The `semi_sync_master_plugin' member of the master general descriptor
points to the type-specific descriptor, which consists only of the
type-specific API version number:

     struct Mysql_replication semi_sync_master_plugin= {
       MYSQL_REPLICATION_INTERFACE_VERSION
     };

The initialization and deinitialization function declarations look like
this:

     static int semi_sync_master_plugin_init(void *p);
     static int semi_sync_master_plugin_deinit(void *p);

The initialization function uses the pointer to register transaction
and binary logging `observers' with the server. After successful
initialization, the server takes care of invoking the observers at the
appropriate times. (For details on the observers, see the source
files.) The deinitialization function cleans up by deregistering the
observers. Each function returns 0 for success or 1 if an error occurs.

To compile and install a plugin library object file, use the
instructions in *Note compiling-plugin-libraries::.  To use the library
files, they must be installed in the plugin directory (the directory
named by the `plugin_dir' system variable).  For the
`rpl_semi_sync_master' and `rpl_semi_sync_slave' plugins, they are
compiled and installed when you build MySQL from source. They are also
included in binary distributions. The build process produces shared
object libraries with names of `semisync_master.so' and
`semisync_slave.so' (the suffix might differ depending on your
platform).


File: manual.info,  Node: writing-audit-plugins,  Next: writing-authentication-plugins,  Prev: writing-semisynchronous-replication-plugins,  Up: writing-plugins

23.2.4.11 Writing Audit Plugins
...............................

This section describes how to write an audit server plugin, using the
example plugin found in the `plugin/audit_null' directory of MySQL
source distributions. The `audit_null.c' source file in that directory
implements a simple example audit plugin named `NULL_AUDIT'.

This description is current as of MySQL 5.5.14. For differences in the
interface in earlier versions, see Audit Plugin Interface Changes.

Within the server, the pluggable audit interface is implemented in the
`sql_audit.h' and `sql_audit.cc' files in the `sql' directory of MySQL
source distributions. Additionally, several places in the server are
modified to call the audit interface when an auditable event occurs, so
that registered audit plugins can be notified about the event if
necessary. To see where such calls occur, look for invocations of
functions with names of the form `mysql_audit_XXX()'.  Audit
notification occurs for server operations such as these:

   * Writing a message to the general query log (if the log is enabled)

   * Writing a message to the error log

   * Sending a query result to a client

   * Client connect and disconnect events

To write an audit plugin, include the following header file in the
plugin source file. Other MySQL or general header files might also be
needed.

     #include <mysql/plugin_audit.h>

`plugin_audit.h' includes `plugin.h', so you need not include the
latter file explicitly. `plugin.h' defines the `MYSQL_AUDIT_PLUGIN'
server plugin type and the data structures needed to declare the plugin.
`plugin_audit.h' defines data structures specific to audit plugins.

An audit plugin, like any MySQL server plugin, has a general plugin
descriptor (see *Note server-plugin-descriptors::). In `audit_null.c',
the general descriptor looks like this:

     mysql_declare_plugin(audit_null)
     {
       MYSQL_AUDIT_PLUGIN,         /* type                            */
       &audit_null_descriptor,     /* descriptor                      */
       "NULL_AUDIT",               /* name                            */
       "Oracle Corp",              /* author                          */
       "Simple NULL Audit",        /* description                     */
       PLUGIN_LICENSE_GPL,
       audit_null_plugin_init,     /* init function (when loaded)     */
       audit_null_plugin_deinit,   /* deinit function (when unloaded) */
       0x0002,                     /* version                         */
       simple_status,              /* status variables                */
       NULL,                       /* system variables                */
       NULL,
       0,
     }
     mysql_declare_plugin_end;

The `name' member (`NULL_AUDIT') indicates the name to use for
references to the plugin in statements such as *Note `INSTALL PLUGIN':
install-plugin. or *Note `UNINSTALL PLUGIN': uninstall-plugin. This is
also the name displayed by *Note `INFORMATION_SCHEMA.PLUGINS':
plugins-table. or *Note `SHOW PLUGINS': show-plugins.

The general descriptor also refers to `simple_status', a structure that
exposes several status variables to the *Note `SHOW STATUS':
show-status. statement:

     static struct st_mysql_show_var simple_status[]=
     {
       { "Audit_null_called", (char *) &number_of_calls, SHOW_INT },
       { "Audit_null_general_log", (char *) &number_of_calls_general_log,
         SHOW_INT },
       { "Audit_null_general_error", (char *) &number_of_calls_general_error,
         SHOW_INT },
       { "Audit_null_general_result", (char *) &number_of_calls_general_result,
         SHOW_INT },
       { 0, 0, 0}
     };

The `audit_null_plugin_init' initialization function sets the status
variables to zero when the plugin is loaded. The
`audit_null_plugin_deinit' function performs cleanup with the plugin is
unloaded. During operation, the plugin increments the first status
variable for each notification it receives. It also increments the
others according to the event class and subclass. In effect, the first
variable is the aggregate of the counts for the event subclasses.

The `audit_null_descriptor' value in the general descriptor points to
the type-specific descriptor. For audit plugins, this descriptor has
the following structure:

     struct st_mysql_audit
     {
       int interface_version;
       void (*release_thd)(MYSQL_THD);
       void (*event_notify)(MYSQL_THD, unsigned int, const void *);
       unsigned long class_mask[MYSQL_AUDIT_CLASS_MASK_SIZE];
     };

The type-specific descriptor has these members:

   * `interface_version': By convention, type-specific plugin
     descriptors begin with the interface version for the given plugin
     type. The server checks `interface_version' when it loads the
     plugin to see whether the plugin is compatible with it.  For audit
     plugins, the value of the `interface_version' member is
     `MYSQL_AUDIT_INTERFACE_VERSION' (defined in `plugin_audit.h').

   * `release_thd': A function that the server calls to inform the
     plugin that it is being dissociated from its thread context. This
     should be `NULL' if there is no such function.

   * `event_notify': A function that the server calls to notify the
     plugin that an auditable event has occurred. This function should
     not be `NULL'; that would not make sense because no auditing would
     occur.

   * `class_mask': A bit mask that indicates the event classes for
     which the plugin wants to receive notification. If this value is
     0, the server passes no events to the plugin.

The server uses the `event_notify' and `release_thd' functions
together. They are called within the context of a specific thread, and
a thread might perform an activity that produces several event
notifications. The first time the server calls `event_notify' for a
thread, it creates a binding of the plugin to the thread. The plugin
cannot be uninstalled while this binding exists. When no more events for
the thread will occur, the server informs the plugin of this by calling
the `release_thd' function, and then destroys the binding. For example,
when a client issues a statement, the thread processing the statement
might notify audit plugins about the result set produced by the
statement and about the statement being logged. After these
notifications occur, the server releases the plugin before putting the
thread to sleep until the client issues another statement.

This design enables the plugin to allocate resources needed for a given
thread in the first call to the `event_notify' function and release
them in the `release_thd' function:

     event_notify function:
       if memory is needed to service the thread
         allocate memory
       ... rest of notification processing ...

     release_thd function:
       if memory was allocated
         release memory
       ... rest of release processing ...

That is more efficient than allocating and releasing memory repeatedly
in the notification function.

For the `NULL_AUDIT' example audit plugin, the type-specific descriptor
looks like this:

     static struct st_mysql_audit audit_null_descriptor=
     {
       MYSQL_AUDIT_INTERFACE_VERSION,                    /* interface version    */
       NULL,                                             /* release_thd function */
       audit_null_notify,                                /* notify function      */
       { (unsigned long) MYSQL_AUDIT_GENERAL_CLASSMASK } /* class mask           */
     };

The server calls `audit_null_notify' to pass audit event information to
the plugin. There is no `release_thd' function.

The event class mask indicates an interest in all events of the
`general' class.  `plugin_audit.h' defines its symbol,
`MYSQL_AUDIT_GENERAL_CLASS', and a mask with a bit for this class:

     #define MYSQL_AUDIT_GENERAL_CLASS 0
     #define MYSQL_AUDIT_GENERAL_CLASSMASK (1 << MYSQL_AUDIT_GENERAL_CLASS)

`plugin_audit.h' also has defines for a `connection' event class,
although the `NULL_AUDIT' plugin does nothing with such events:

     #define MYSQL_AUDIT_CONNECTION_CLASS 1
     #define MYSQL_AUDIT_CONNECTION_CLASSMASK (1 << MYSQL_AUDIT_CONNECTION_CLASS)

A plugin could be written to receive both general and connection events
by setting its type-specific descriptor class mask like this:

       { (unsigned long) MYSQL_AUDIT_GENERAL_CLASSMASK |
                      MYSQL_AUDIT_CONNECTION_CLASSMASK } /* class mask        */

In the type-specific descriptor, the second and third parameters of the
`event_notify' function prototype represent the event class and a
generic pointer to an event structure:

     void (*event_notify)(MYSQL_THD, unsigned int, const void *);

Events in different classes may have different structures, so the
notification function should use the event class value to determine how
to interpret the pointer to the event structure.

If the server calls the notification function with an event class of
`MYSQL_AUDIT_GENERAL_CLASS', it passes the event structure as a pointer
to a `mysql_event_general' structure:

     struct mysql_event_general
     {
       unsigned int event_subclass;
       int general_error_code;
       unsigned long general_thread_id;
       const char *general_user;
       unsigned int general_user_length;
       const char *general_command;
       unsigned int general_command_length;
       const char *general_query;
       unsigned int general_query_length;
       struct charset_info_st *general_charset;
       unsigned long long general_time;
       unsigned long long general_rows;
     };

Audit plugins can interpret `mysql_event_general' members as follows:

   * `event_subclass': The event subclass, one of the following values:

          #define MYSQL_AUDIT_GENERAL_LOG 0
          #define MYSQL_AUDIT_GENERAL_ERROR 1
          #define MYSQL_AUDIT_GENERAL_RESULT 2
          #define MYSQL_AUDIT_GENERAL_STATUS 3

   * `general_error_code': The error code.  This is a value like that
     returned by the *Note `mysql_errno()': mysql-errno. C API
     function; 0 means `no error.'

   * `general_thread_id': The ID of the thread for which the event
     occurred.

   * `general_user': The current user for the event.

   * `general_user_length': The length of `general_user', in bytes.

   * `general_command': For general query log events, the type of
     operation. Examples: `Connect', `Query', `Shutdown'. For error log
     events, the error message. This is a value like that returned by
     the *Note `mysql_error()': mysql-error. C API function; an empty
     string means `no error.' For result events, this is empty.

   * `general_command_length': The length of `general_command', in
     bytes.

   * `general_query': The SQL statement that was logged or produced a
     result.

   * `general_query_length': The length of `general_query', in bytes.

   * `general_charset': Character set information for the event.

   * `general_time': A *Note `TIMESTAMP': datetime. value indicating
     the time just before the notification function was called.

   * `general_rows': For general query log events, zero. For error log
     events, the row number at which an error occurred. For result
     events, the number of rows in the result plus one. For statements
     that produce no result set, the value is 0. This encoding enables
     statements that produce no result set to be distinguished from
     those that produce an empty result set. For example, for a *Note
     `DELETE': delete. statement, this value is 0. For a *Note
     `SELECT': select, the result is always 1 or more, where 1
     represents an empty result set.

The `NULL_AUDIT' plugin notification function is quite simple. It
increments a global event counter, verifies that the event is of the
`general' class, then looks at the event subclass to determine which
subclass counter to increment:

     static void audit_null_notify(MYSQL_THD thd __attribute__((unused)),
                                   unsigned int event_class,
                                   const void *event)
     {
       number_of_calls++;
       if (event_class == MYSQL_AUDIT_GENERAL_CLASS)
       {
         const struct mysql_event_general *event_general=
           (const struct mysql_event_general *) event;
         switch (event_general->event_subclass)
         {
         case MYSQL_AUDIT_GENERAL_LOG:
           number_of_calls_general_log++;
           break;
         case MYSQL_AUDIT_GENERAL_ERROR:
           number_of_calls_general_error++;
           break;
         case MYSQL_AUDIT_GENERAL_RESULT:
           number_of_calls_general_result++;
           break;
         default:
           break;
         }
       }
     }

To compile and install a plugin library object file, use the
instructions in *Note compiling-plugin-libraries::.  To use the library
file, it must be installed in the plugin directory (the directory named
by the `plugin_dir' system variable).  For the `AUDIT_NULL' plugin, it
is compiled and installed when you build MySQL from source. It is also
included in binary distributions. The build process produces a shared
object library with a name of `adt_null.so' (the suffix might differ
depending on your platform).

To register the plugin at runtime, use this statement (change the
suffix as necessary):

     mysql> INSTALL PLUGIN NULL_AUDIT SONAME 'adt_null.so';

For additional information about plugin loading, see *Note
server-plugin-loading::.

To verify plugin installation, examine the *Note
`INFORMATION_SCHEMA.PLUGINS': plugins-table. table or use the *Note
`SHOW PLUGINS': show-plugins.  statement.

While the audit plugin is installed, it exposes status variables that
indicate the events for which the plugin has been called:

     mysql> SHOW STATUS LIKE 'Audit_null%';
     +---------------------------+-------+
     | Variable_name             | Value |
     +---------------------------+-------+
     | Audit_null_called         | 1385  |
     | Audit_null_general_error  | 1     |
     | Audit_null_general_log    | 741   |
     | Audit_null_general_result | 643   |
     +---------------------------+-------+

`Audit_null_called' counts all events, and the other variables count
instances of event subclasses. For example, the preceding *Note `SHOW
STATUS': show-status. statement causes the server to send a result to
the client and to write a message to the general query log if that log
is enabled. Thus, a client that issues the statement repeatedly causes
`Audit_null_called' and `Audit_null_general_result' to be incremented
each time, and `Audit_null_general_log' to be incremented if the log is
enabled.

To disable the plugin after testing it, use this statement to unload it:

     mysql> UNINSTALL PLUGIN NULL_AUDIT;

* Audit Plugin Interface Changes *

The audit plugin interface has undergone the following changes:

   * In MySQL 5.5.5, the `event_subclass' member was added to the
     `mysql_event_general' structure.  Corresponding to this change,
     the type-specific interface version,
     `MYSQL_AUDIT_INTERFACE_VERSION', was increased from `0x0100' to
     `0x0200' and

   * In MySQL 5.5.9, the `MYSQL_AUDIT_CONNECTION_CLASS' event class was
     added, and the `MYSQL_AUDIT_GENERAL_STATUS' subclass was added to
     the `MYSQL_AUDIT_GENERAL_CLASS' event class.

   * In MySQL 5.5.14, the `event_class' member was removed from the
     `mysql_event_general' structure and the calling sequence for the
     notification function was changed. Originally, the second argument
     was a pointer to the event structure. The function now receives
     this information as two arguments: an event class number and a
     pointer to the event. Corresponding to these changes,
     `MYSQL_AUDIT_INTERFACE_VERSION' was increased to `0x0300'.

Each audit plugin must be compiled against MySQL source in which the
value of `MYSQL_AUDIT_INTERFACE_VERSION' is appropriate for the
interface version the plugin requires.


File: manual.info,  Node: writing-authentication-plugins,  Prev: writing-audit-plugins,  Up: writing-plugins

23.2.4.12 Writing Authentication Plugins
........................................

* Menu:

* writing-authentication-plugins-server-side::  Writing the Server-Side Authentication Plugin
* writing-authentication-plugins-client-side::  Writing the Client-Side Authentication Plugin
* writing-authentication-plugins-setup::  Using the Authentication Plugins
* writing-authentication-plugins-proxy-users::  Implementing Proxy User Support in Authentication Plugins

MySQL supports pluggable authentication, in which plugins are invoked
to authenticate client connections. Authentication plugins enable the
use of authentication methods other than the built-in method of
passwords stored in the `mysql.user' table. For example, plugins can be
written to access external authentication methods. Also, authentication
plugins can support the proxy user capability, such that the connecting
user is a proxy for another user and is treated, for purposes of access
control, as having the privileges of a different user. For more
information, see *Note pluggable-authentication::, and *Note
proxy-users::.

An authentication plugin can be written for the server side or the
client side. Server-side plugins use the same plugin API that is used
for the other server plugin types such as full-text parser or audit
plugins (although with a different type-specific descriptor).
Client-side plugins use the client plugin API.

Several header files contain information relevant to authentication
plugins:

   * `plugin.h': Defines the `MYSQL_AUTHENTICATION_PLUGIN' server
     plugin type.

   * `client_plugin.h': Defines the API for client plugins. This
     includes the client plugin descriptor and function prototypes for
     client plugin C API calls (see *Note c-api-plugin-functions::).

   * `plugin_auth.h': Defines the part of the server plugin API
     specific to authentication plugins.  This includes the
     type-specific descriptor for server-side authentication plugins
     and the `MYSQL_SERVER_AUTH_INFO' structure.

   * `plugin_auth_common.h': Contains common elements of client and
     server authentication plugins. This includes return value
     definitions and the `MYSQL_PLUGIN_VIO' structure.

To write an authentication plugin, include the following header files
in the plugin source file. Other MySQL or general header files might
also be needed.

   * For a source file that implements a server authentication plugin,
     include this file:

          #include <mysql/plugin_auth.h>

   * For a source file that implements a client authentication plugin,
     or both client and server plugins, include these files:

          #include <mysql/plugin_auth.h>
          #include <mysql/client_plugin.h>
          #include <mysql>

`plugin_auth.h' includes `plugin.h' and `plugin_auth_common.h', so you
need not include the latter files explicitly.

This section describes how to write a pair of simple server and client
authentication plugins that work together.

*Warning*:

These plugins accept any non-empty password and the password is sent in
clear text. This is insecure, so the plugins _should not be used in
production environments._

The server-side and client-side plugins developed here both are named
`auth_simple'. As described in *Note plugin-data-structures::, the
plugin library file must have the same basename as the client plugin,
so the source file name is `auth_simple.c' and produces a library named
`auth_simple.so' (assuming that your system uses `.so' as the suffix
for library files).

In MySQL source distributions, authentication plugin source is located
in the `plugin/auth' directory and can be examined as a guide to
writing other authentication plugins. Also, to see how the built-in
authentication plugins are implemented, see `sql/sql_acl.cc' for
plugins that are built in to the MySQL server and `sql-common/client.c'
for plugins that are built in to the `libmysqlclient' client library.
(For the built-in client plugins, note that the `auth_plugin_t'
structures used there differ from the structures used with the usual
client plugin declaration macros. In particular, the first two members
are provided explicitly, not by declaration macros.)


File: manual.info,  Node: writing-authentication-plugins-server-side,  Next: writing-authentication-plugins-client-side,  Prev: writing-authentication-plugins,  Up: writing-authentication-plugins

23.2.4.13 Writing the Server-Side Authentication Plugin
.......................................................

Declare the server-side plugin with the usual general descriptor format
that is used for all server plugin types (see *Note
server-plugin-descriptors::). For the `auth_simple' plugin, the
descriptor looks like this:

     mysql_declare_plugin(auth_simple)
     {
       MYSQL_AUTHENTICATION_PLUGIN,
       &auth_simple_handler,                 /* type-specific descriptor */
       "auth_simple",                        /* plugin name */
       "Author Name",                        /* author */
       "Any-password authentication plugin", /* description */
       PLUGIN_LICENSE_GPL,                   /* license type */
       NULL,                                 /* no init function */
       NULL,                                 /* no deinit function */
       0x0100,                               /* version = 1.0 */
       NULL,                                 /* no status variables */
       NULL,                                 /* no system variables */
       NULL,                                 /* no reserved information */
       0                                     /* no flags */
     }
     mysql_declare_plugin_end;

The `name' member (`auth_simple') indicates the name to use for
references to the plugin in statements such as *Note `INSTALL PLUGIN':
install-plugin. or *Note `UNINSTALL PLUGIN': uninstall-plugin. This is
also the name displayed by *Note `SHOW PLUGINS': show-plugins. or *Note
`INFORMATION_SCHEMA.PLUGINS': plugins-table.

The `auth_simple_handler' member of the general descriptor points to
the type-specific descriptor.  For an authentication plugin, the
type-specific descriptor is an instance of the `st_mysql_auth'
structure (defined in `plugin_auth.h'):

     struct st_mysql_auth
     {
       int interface_version;
       const char *client_auth_plugin;
       int (*authenticate_user)(MYSQL_PLUGIN_VIO *vio, MYSQL_SERVER_AUTH_INFO *info);
     };

The `st_mysql_auth' structure has three members: The type-specific API
version number, the client plugin name, and a pointer to the main
plugin function that communicates with the client. The
`client_auth_plugin' member should indicate the name of the client
plugin if a specific plugin is required. A value of `NULL' means `any
plugin.' In the latter case, whatever plugin the client uses will do.
This is useful if the server plugin does not care about the client
plugin or what user name or password it sends. For example, this might
be true if the server plugin authenticates only local clients and uses
some property of the operating system rather than the information sent
by the client plugin.

For `auth_simple', the type-specific descriptor looks like this:

     static struct st_mysql_auth auth_simple_handler =
     {
       MYSQL_AUTHENTICATION_INTERFACE_VERSION,
       "auth_simple",           /* required client-side plugin name */
       auth_simple_server       /* server-side plugin main function */
     };

The main function takes two arguments representing an I/O structure and
a `MYSQL_SERVER_AUTH_INFO' structure. The structure definition is found
in `plugin_auth.h'. It looks like this:

     typedef struct st_mysql_server_auth_info
     {
       char *user_name;
       unsigned int user_name_length;
       const char *auth_string;
       unsigned long auth_string_length;
       char authenticated_as[MYSQL_USERNAME_LENGTH+1];
       char external_user[512];
       int  password_used;
       const char *host_or_ip;
       unsigned int host_or_ip_length;
     } MYSQL_SERVER_AUTH_INFO;

The character set for string members is UTF-8. If there is a `_length'
member associated with a string, it indicates the string length in
bytes. Strings are also null-terminated.

When an authentication plugin is invoked by the server, it should
interpret the `MYSQL_SERVER_AUTH_INFO' structure members as follows.
Some of these are used to set the value of SQL functions or system
variables within the client session, as indicated.

   * `user_name': The user name sent by the client. The value becomes
     the `USER()' function value.

   * `user_name_length': The length of `user_name' in bytes.

   * `auth_string': The value of the `authentication_string' column of
     the `mysql.user' table row for the matching account name (that is,
     the row that matches the client user name and host name and that
     the server uses to determine how to authenticate the client).

     Suppose that you create an account using the following statement:

          CREATE USER 'my_user'@'localhost'
            IDENTIFIED WITH my_plugin AS 'my_auth_string';

     When `my_user' connects from the local host, the server invokes
     `my_plugin' and passes `'my_auth_string'' to it as the
     `auth_string' value.

   * `auth_string_length': The length of `auth_string' in bytes.

   * `authenticated_as': The server sets this to the user name (the
     value of `user_name'). The plugin can alter it to indicate that
     the client should have the privileges of a different user. For
     example, if the plugin supports proxy users, the initial value is
     the name of the connecting (proxy) user, and the plugin can change
     this member to the proxied user name. The server then treats the
     proxy user as having the privileges of the proxied user (assuming
     that the other conditions for proxy user support are satisfied; see
     *Note writing-authentication-plugins-proxy-users::).  The value is
     represented as a string at most `MYSQL_USER_NAME_LENGTH' bytes
     long, plus a terminating null. The value becomes the
     `CURRENT_USER()' function value.

   * `external_user': The server sets this to the empty string (null
     terminated). Its value becomes the `external_user' system variable
     value. If the plugin wants that system variable to have a
     different value, it should set this member accordingly; for
     example, to the connecting user name. The value is represented as
     a string at most 511 bytes long, plus a terminating null.

   * `password_used': This member applies when authentication fails.
     The plugin can set it or ignore it. The value is used to construct
     the failure error message of `Authentication fails. Password used:
     %s'. The value of `password_used' determines how `%s' is handled,
     as shown in the following table.

     This table lists values for the `password_used' member and
     describes how values are handled in the construction of
     `Authentication fails. Password used: %s' messages.

     `password_used'   `%s' Handling
     0                 NO
     1                 YES
     2                 There will be no `%s'

   * `host_or_ip': The name of the client host if it can be resolved,
     or the IP address otherwise.

   * `host_or_ip_length': The length of `host_or_ip' in bytes.

The `auth_simple' main function, `auth_simple_server()', reads the
password (a null-terminated string) from the client and succeeds if the
password is nonempty (first byte not null):

     static int auth_simple_server (MYSQL_PLUGIN_VIO *vio,
                                    MYSQL_SERVER_AUTH_INFO *info)
     {
       unsigned char *pkt;
       int pkt_len;

       /* read the password as null-terminated string, fail on error */
       if ((pkt_len= vio->read_packet(vio, &pkt)) < 0)
         return CR_ERROR;

       /* fail on empty password */
       if (!pkt_len || *pkt == '\0')
       {
         info->password_used= PASSWORD_USED_NO;
         return CR_ERROR;
       }

       /* accept any nonempty password */
       info->password_used= PASSWORD_USED_YES;

       return CR_OK;
     }

The main function should return one of the error codes shown in the
following table.

This table lists error codes for the `auth_simple' main function,
`auth_simple_server()', and describes the meaning of each error code.

Error Code         Meaning
`CR_OK'            Success
`CR_OK_HANDSHAKE_COMPLETE'Do not send a status packet back to client
`CR_ERROR'         Error

For an example of how the handshake works, see the
`plugin/auth/dialog.c' source file.

`auth_simple_server_main()' is so basic that it does not use the
authentication information structure except to set the member that
indicates whether a password was received.

A plugin that supports proxy users must return to the server the name
of the proxied user (the MySQL user whose privileges the client user
should get). To do this, the plugin must set the
`info->authenticated_as' member to the proxied user name. For
information about proxying, see *Note proxy-users::, and *Note
writing-authentication-plugins-proxy-users::.


File: manual.info,  Node: writing-authentication-plugins-client-side,  Next: writing-authentication-plugins-setup,  Prev: writing-authentication-plugins-server-side,  Up: writing-authentication-plugins

23.2.4.14 Writing the Client-Side Authentication Plugin
.......................................................

Declare the client-side plugin descriptor with the
`mysql_declare_client_plugin()' and `mysql_end_client_plugin' macros
(see *Note client-plugin-descriptors::). For the `auth_simple' plugin,
the descriptor looks like this:

     mysql_declare_client_plugin(AUTHENTICATION)
       "auth_simple",                        /* plugin name */
       "Author Name",                        /* author */
       "Any-password authentication plugin", /* description */
       {1,0,0},                              /* version = 1.0.0 */
       "GPL",                                /* license type */
       NULL,                                 /* for internal use */
       NULL,                                 /* no init function */
       NULL,                                 /* no deinit function */
       NULL,                                 /* no option-handling function */
       auth_simple_client                    /* main function */
     mysql_end_client_plugin;

The descriptor members common to all client plugins are the plugin name
through the option-handling function. Following the common members, an
authentication plugin also has one extra member. This is the `main'
function, which handles communication with the server. The function
takes two arguments representing an I/O structure and a connection
handler. For our simple any-password plugin, the main function does
nothing but write to the server the password provided by the user:

     static int auth_simple_client (MYSQL_PLUGIN_VIO *vio, MYSQL *mysql)
     {
       int res;

       /* send password as null-terminated string in clear text */
       res= vio->write_packet(vio, (const unsigned char *) mysql->passwd,
                              strlen(mysql->passwd) + 1);

       return res ? CR_ERROR : CR_OK;
     }

The main function should return one of the error codes shown in the
following table.

This table lists error codes for the authentication `main' function and
describes the meaning of each function.

Error Code         Meaning
`CR_OK'            Success
`CR_OK_HANDSHAKE_COMPLETE'Success, client done
`CR_ERROR'         Error

`CR_OK_HANDSHAKE_COMPLETE' indicates that the client has done its part
successfully and has read the last packet. A client plugin may return
`CR_OK_HANDSHAKE_COMPLETE' if the number of round trips in the
authentication protocol is not known in advance and the plugin must
read another packet to determine whether authentication is finished.


File: manual.info,  Node: writing-authentication-plugins-setup,  Next: writing-authentication-plugins-proxy-users,  Prev: writing-authentication-plugins-client-side,  Up: writing-authentication-plugins

23.2.4.15 Using the Authentication Plugins
..........................................

To compile and install a plugin library object file, see the
instructions in *Note compiling-plugin-libraries::. To use the library
file, it must be installed in the plugin directory (the directory named
by the `plugin_dir' system variable).

Register the server-side plugin with the server. For example, to load
the plugin at server startup, use a `--plugin-load=auth_simple.so'
option (change the library suffix as necessary for your system).

Create a user for whom the server will use the `auth_simple' plugin for
authentication:

     mysql> CREATE USER 'x'@'localhost'
         -> IDENTIFIED WITH auth_simple;

Use a client program to connect to the server as user `x'. The
server-side `auth_simple' plugin communicates with the client program
that it should use the client-side `auth_simple' plugin, and the latter
sends the password to the server. The server plugin should reject
connections that send an empty password and accept connections that
send a nonempty password. Invoke the client program each way to verify
this:

     shell> mysql --user=x --skip-password
     ERROR 1045 (28000): Access denied for user 'x'@'localhost' (using password: NO)

     shell> mysql --user=x --password=abc
     mysql>

Because the server plugin accepts any nonempty password, it should be
considered insecure. After testing the plugin to verify that it works,
restart the server without the `--plugin-load' option so as not to
indavertently leave the server running with an insecure authentication
plugin loaded. Also, drop the user with *Note `DROP USER
'x'@'localhost'': drop-user.

For additional information about loading and using authentication
plugins, see *Note server-plugin-loading::, and *Note
pluggable-authentication::.

If you are writing a client program that supports the use of
authentication plugins, normally such a program causes a plugin to be
loaded by calling *Note `mysql_options()': mysql-options. to set the
`MYSQL_DEFAULT_AUTH' and `MYSQL_PLUGIN_DIR' options:

     char *plugin_dir = "PATH_TO_PLUGIN_DIR";
     char *default_auth = "PLUGIN_NAME";

     /* ... process command-line options ... */

     mysql_options(&mysql, MYSQL_PLUGIN_DIR, plugin_dir);
     mysql_options(&mysql, MYSQL_DEFAULT_AUTH, default_auth);

Typically, the program will also accept `--plugin-dir' and
`--default-auth' options that enable users to override the default
values.

Should a client program require lower-level plugin management, the
client library contains functions that take an `st_mysql_client_plugin'
argument. See *Note c-api-plugin-functions::.


File: manual.info,  Node: writing-authentication-plugins-proxy-users,  Prev: writing-authentication-plugins-setup,  Up: writing-authentication-plugins

23.2.4.16 Implementing Proxy User Support in Authentication Plugins
...................................................................

One of the capabilities that pluggable authentication makes possible is
proxy users (see *Note proxy-users::).  For a server-side
authentication plugin to participate in proxy user support, these
conditions must be satisfied:

   * When a connecting client should be treated as a proxy user, the
     plugin must return a different name in the `authenticated_as'
     member of the `MYSQL_SERVER_AUTH_INFO' structure, to indicate the
     proxied user name. It may also optionally set the `external_user'
     member, to set the value of the `external_user' system variable.

   * Proxy user accounts must be set up to be authenticated by the
     plugin. Use the *Note `CREATE USER': create-user. or *Note
     `GRANT': grant.  statement to associate accounts with plugins.

   * Proxy user accounts must have the `PROXY' privilege for the
     proxied accounts. Use the *Note `GRANT': grant. statement to grant
     this privilege.

In other words, the only aspect of proxy user support required of the
plugin is that it set `authenticated_as' to the proxied user name. The
rest is optional (setting `external_user') or done by the DBA using SQL
statements.

How does an authentication plugin determine which proxied user to
return when the proxy user connects? That depends on the plugin.
Typically, the plugin maps clients to proxied users based on the
authentication string passed to it by the server. This string comes
from the `AS' part of the `IDENTIFIED WITH' clause of the *Note `CREATE
USER': create-user. statement that specifies use of the plugin for
authentication.

The plugin developer determines the syntax rules for the authentication
string and implements the plugin according to those rules. Suppose that
a plugin takes a comma-separated list of pairs that map external users
to MySQL users. For example:

     CREATE USER ''@'%.example.com'
       IDENTIFIED WITH my_plugin AS 'extuser1=mysqlusera, extuser2=mysqluserb'
     CREATE USER ''@'%.example.org'
       IDENTIFIED WITH my_plugin AS 'extuser1=mysqluserc, extuser2=mysqluserd'

When the server invokes a plugin to authenticate a client, it passes
the appropriate authentication string to the plugin. The plugin is
responsible to:

  1. Parse the string into its components to determine the mapping to
     use

  2. Compare the client user name to the mapping

  3. Return the proper MySQL user name

For example, if `extuser2' connects from an `example.com' host, the
server passes `'extuser1=mysqlusera, extuser2=mysqluserb'' to the
plugin, and the plugin should copy `mysqluserb' into
`authenticated_as', with a terminating null byte. If `extuser2'
connects from an `example.org' host, the server passes
`'extuser1=mysqluserc, extuser2=mysqluserd'', and the plugin should copy
`mysqluserd' instead.

If there is no match in the mapping, the action depends on the plugin.
If a match is required, the plugin likely will return an error. Or the
plugin might simply return the client name; in this case, it should not
change `authenticated_as', and the server will not treat the client as
a proxy.

The following example demonstrates how to handle proxy users using a
plugin named `auth_simple_proxy'.  Like the `auth_simple' plugin
described earlier, `auth_simple_proxy' accepts any nonempty password as
valid (and thus should not be used in production environments). In
addition, it examines the `auth_string' authentication string member
and uses these very simple rules for interpreting it:

   * If the string is empty, the plugin returns the user name as given
     and no proxying occurs. That is, the plugin leaves the value of
     `authenticated_as' unchanged.

   * If the string is nonempty, the plugin treats it as the name of the
     proxied user and copies it to `authenticated_as' so that proxying
     occurs.

For testing, set up one account that is not proxied according to the
preceding rules, and one that is. This means that one account has no
`AS' clause, and one includes an `AS' clause that names the proxied
user:

     CREATE USER 'plugin_user1'@'localhost'
       IDENTIFIED WITH auth_simple_proxy;
     CREATE USER 'plugin_user2'@'localhost'
       IDENTIFIED WITH auth_simple_proxy AS 'proxied_user';

In addition, create an account for the proxied user and grant
`plugin_user2' the `PROXY' privilege for it:

     CREATE USER 'proxied_user'@'localhost'
       IDENTIFIED BY 'proxied_user_pass';
     GRANT PROXY
       ON 'proxied_user'@'localhost'
       TO 'plugin_user2'@'localhost';

Before the server invokes an authentication plugin, it sets
`authenticated_as' to the client user name.  To indicate that the user
is a proxy, the plugin should set `authenticated_as' to the proxied user
name. For `auth_simple_proxy', this means that it must examine the
`auth_string' value, and, if the value is nonempty, copy it to the
`authenticated_as' member to return it as the name of the proxied user.
In addition, when proxying occurs, the plugin sets the `external_user'
member to the client user name; this becomes the value of the
`external_user' system variable.

     static int auth_simple_proxy_server (MYSQL_PLUGIN_VIO *vio,
                                          MYSQL_SERVER_AUTH_INFO *info)
     {
       unsigned char *pkt;
       int pkt_len;

       /* read the password as null-terminated string, fail on error */
       if ((pkt_len= vio->read_packet(vio, &pkt)) < 0)
         return CR_ERROR;

       /* fail on empty password */
       if (!pkt_len || *pkt == '\0')
       {
         info->password_used= PASSWORD_USED_NO;
         return CR_ERROR;
       }

       /* accept any nonempty password */
       info->password_used= PASSWORD_USED_YES;

       /* if authentication string is nonempty, use as proxied user name */
       /* and use client name as external_user value */
       if (info->auth_string_length > 0)
       {
         strcpy (info->authenticated_as, info->auth_string);
         strcpy (info->external_user, info->user_name);
       }

       return CR_OK;
     }

After a successful connection, the `USER()' function should indicate
the connecting client user and host name, and `CURRENT_USER()' should
indicate the account whose privileges apply during the session. The
latter value should be the connecting user account if no proxying
occurs or the proxied account if proxying does occur.

Compile and install the plugin, then test it. First, connect as
`plugin_user1':

     shell> mysql --user=plugin_user1 --password=x

In this case, there should be no proxying:

     mysql> SELECT USER(), CURRENT_USER(), @@proxy_user, @@external_user\G
     *************************** 1. row ***************************
              USER(): plugin_user1@localhost
      CURRENT_USER(): plugin_user1@localhost
        @@proxy_user: NULL
     @@external_user: NULL

Then connect as `plugin_user2':

     shell> mysql --user=plugin_user2 --password=x

In this case, `plugin_user2' should be proxied to `proxied_user':

     mysql> SELECT USER(), CURRENT_USER(), @@proxy_user, @@external_user\G
     *************************** 1. row ***************************
              USER(): plugin_user2@localhost
      CURRENT_USER(): proxied_user@localhost
        @@proxy_user: 'plugin_user2'@'localhost'
     @@external_user: 'plugin_user2'@'localhost'


File: manual.info,  Node: plugin-services,  Prev: writing-plugins,  Up: plugin-api

23.2.5 MySQL Services for Plugins
---------------------------------

MySQL server plugins have access to server `services.' The services
interface exposes server functionality that plugins can call. It
complements the plugin API and has these characteristics:

   * Services enable plugins to access code inside the server using
     ordinary function calls.

   * Services are portable and work on multiple platforms.

   * The interface includes a versioning mechanism so that service
     versions supported by the server can be checked at load time
     against plugin versions. Versioning protects against
     incompatibilities between the version of a service that the server
     provides and the version of the service expected or required by a
     plugin.

Current services include the following, and others can be implemented:

   * `my_snprintf': A string-formatting service that produces
     consistent results across platforms.

   * `my_thd_scheduler': A service for plugins to select a thread
     scheduler.

   * `thd_alloc': A memory-allocation service.

   * `thd_wait': A service for plugins to report when they are going to
     sleep or stall.

The plugin services interface differs from the plugin API as follows:

   * The plugin API enables plugins to be used by the server. The
     calling initiative lies with the server to invoke plugins.  This
     enables plugins to extend server functionality or register to
     receive notifications about server processing.

   * The plugin services interface enables plugins to call code inside
     the server. The calling initiative lies with plugins to invoke
     service functions. This enables functionality already implemented
     in the server to be used by many plugins; they need not
     individually implement it themselves.

For developers who wish to modify the server to add a new service, see
MySQL Services for Plugins
(http://dev.mysql.com/doc/internals/en/mysql-services-for-plugins.html).

The remainder of this section describes how a plugin uses server
functionality that is available as a service. See also the source for
the `daemon' example plugin, which uses the `my_snprintf' service.
Within a MySQL source distribution, that plugin is located in the
`plugin/daemon_example' directory.

To determine what services exist and what functions they provide, look
in the `include/mysql' directory of a MySQL source distribution. The
relevant files are:

   * `plugin.h' includes `services.h'.

   * `services.h' is the `umbrella' header that includes all available
     service-specific header files.

   * Service-specific headers have names like `service_my_snprintf.h' or
     `service_thd_alloc.h'.

Each service-specific header should contain comments that provide full
usage documentation for a given service, including what service
functions are available, their calling sequences, and return values.

To use a service or services from within a plugin, the plugin source
file must include the `plugin.h' header file to access service-related
information:

     #include <mysql/plugin.h>

This does not represent any additional setup cost. A plugin must
include that file anyway because it contains definitions and structures
that every plugin needs.

To access a service, a plugin calls service functions like any other
function. For example, to format a string into a buffer for printing,
call the `my_snprintf()' function provided by the service of the same
name:

     char buffer[BUFFER_SIZE];

     my_snprintf(buffer, sizeof(buffer), FORMAT_STRING, ARGUMENT_TO_FORMAT, ...);

When you build your plugin, you must link in the `libmysqlservices'
library. Use the `-lmysqlservices' flag at link time. For example, for
`CMake', put this in the top-level `CMakeLists.txt' file:

     FIND_LIBRARY(MYSQLSERVICES_LIB mysqlservices
      PATHS "${MYSQL_SRCDIR}/libservices" NO_DEFAULT_PATH)

Put this in the `CMakeLists.txt' file in the directory containing the
plugin source:

     # the plugin needs the mysql services library for error logging
     TARGET_LINK_LIBRARIES (YOUR_PLUGIN_LIBRARY_NAME ${MYSQLSERVICES_LIB})


File: manual.info,  Node: adding-functions,  Next: porting,  Prev: plugin-api,  Up: extending-mysql

23.3 Adding New Functions to MySQL
==================================

* Menu:

* udf-features::                 Features of the User-Defined Function Interface
* adding-udf::                   Adding a New User-Defined Function
* adding-native-function::       Adding a New Native Function

There are three ways to add new functions to MySQL:

   * You can add functions through the user-defined function (UDF)
     interface. User-defined functions are compiled as object files and
     then added to and removed from the server dynamically using the
     *Note `CREATE FUNCTION': create-function. and *Note `DROP
     FUNCTION': drop-function. statements. See *Note
     create-function-udf::.

   * You can add functions as native (built-in) MySQL functions.
     Native functions are compiled into the *Note `mysqld': mysqld.
     server and become available on a permanent basis.

   * Another way to add functions is by creating stored functions.
     These are written using SQL statements rather than by compiling
     object code. The syntax for writing stored functions is not
     covered here. See *Note stored-routines::.

Each method of creating compiled functions has advantages and
disadvantages:

   * If you write user-defined functions, you must install object files
     in addition to the server itself. If you compile your function
     into the server, you don't need to do that.

   * Native functions require you to modify a source distribution.
     UDFs do not. You can add UDFs to a binary MySQL distribution.  No
     access to MySQL source is necessary.

   * If you upgrade your MySQL distribution, you can continue to use
     your previously installed UDFs, unless you upgrade to a newer
     version for which the UDF interface changes. For native functions,
     you must repeat your modifications each time you upgrade.

Whichever method you use to add new functions, they can be invoked in
SQL statements just like native functions such as `ABS()' or
`SOUNDEX()'.

See *Note function-resolution::, for the rules describing how the
server interprets references to different kinds of functions.

The following sections describe features of the UDF interface, provide
instructions for writing UDFs, discuss security precautions that MySQL
takes to prevent UDF misuse, and describe how to add native MySQL
functions.

For example source code that illustrates how to write UDFs, take a look
at the `sql/udf_example.c' file that is provided in MySQL source
distributions.


File: manual.info,  Node: udf-features,  Next: adding-udf,  Prev: adding-functions,  Up: adding-functions

23.3.1 Features of the User-Defined Function Interface
------------------------------------------------------

The MySQL interface for user-defined functions provides the following
features and capabilities:

   * Functions can return string, integer, or real values and can
     accept arguments of those same types.

   * You can define simple functions that operate on a single row at a
     time, or aggregate functions that operate on groups of rows.

   * Information is provided to functions that enables them to check
     the number, types, and names of the arguments passed to them.

   * You can tell MySQL to coerce arguments to a given type before
     passing them to a function.

   * You can indicate that a function returns `NULL' or that an error
     occurred.


File: manual.info,  Node: adding-udf,  Next: adding-native-function,  Prev: udf-features,  Up: adding-functions

23.3.2 Adding a New User-Defined Function
-----------------------------------------

* Menu:

* udf-calling::                  UDF Calling Sequences for Simple Functions
* udf-aggr-calling::             UDF Calling Sequences for Aggregate Functions
* udf-arguments::                UDF Argument Processing
* udf-return-values::            UDF Return Values and Error Handling
* udf-compiling::                Compiling and Installing User-Defined Functions
* udf-security::                 User-Defined Function Security Precautions

For the UDF mechanism to work, functions must be written in C or C++
and your operating system must support dynamic loading.  MySQL source
distributions include a file `sql/udf_example.c' that defines five UDF
functions. Consult this file to see how UDF calling conventions work.
The `include/mysql_com.h' header file defines UDF-related symbols and
data structures, although you need not include this header file
directly; it is included by `mysql.h'.

A UDF contains code that becomes part of the running server, so when
you write a UDF, you are bound by any and all constraints that apply to
writing server code. For example, you may have problems if you attempt
to use functions from the `libstdc++' library. These constraints may
change in future versions of the server, so it is possible that server
upgrades will require revisions to UDFs that were originally written
for older servers. For information about these constraints, see *Note
source-configuration-options::, and *Note compilation-problems::.

To be able to use UDFs, you must link *Note `mysqld': mysqld.
dynamically. If you want to use a UDF that needs to access symbols from
*Note `mysqld': mysqld. (for example, the `metaphone' function in
`sql/udf_example.c' uses `default_charset_info'), you must link the
program with `-rdynamic' (see `man dlopen').

For each function that you want to use in SQL statements, you should
define corresponding C (or C++) functions. In the following discussion,
the name `xxx' is used for an example function name. To distinguish
between SQL and C/C++ usage, `XXX()' (uppercase) indicates an SQL
function call, and `xxx()' (lowercase) indicates a C/C++ function call.

*Note*:

When using C++ you can encapsulate your C functions within:

     extern "C" { ... }

This ensures that your C++ function names remain readable in the
completed UDF.

The following list describes the C/C++ functions that you write to
implement the interface for a function named `XXX()'. The main function,
`xxx()', is required. In addition, a UDF requires at least one of the
other functions described here, for reasons discussed in *Note
udf-security::.

   * `xxx()'

     The main function. This is where the function result is computed.
     The correspondence between the SQL function data type and the
     return type of your C/C++ function is shown here.

     This table lists SQL function data types and corresponding C/C++
     data types.

     SQL Type          C/C++ Type
     `STRING'          `char *'
     *Note `INTEGER':  `long long'
     integer-types.    
     *Note `REAL':     `double'
     floating-point-types.

     It is also possible to declare a *Note `DECIMAL':
     fixed-point-types. function, but currently the value is returned
     as a string, so you should write the UDF as though it were a
     `STRING' function. `ROW' functions are not implemented.

   * `xxx_init()'

     The initialization function for `xxx()'. If present, it can be
     used for the following purposes:

        * To check the number of arguments to `XXX()'.

        * To verify that the arguments are of a required type or,
          alternatively, to tell MySQL to coerce arguments to the
          required types when the main function is called.

        * To allocate any memory required by the main function.

        * To specify the maximum length of the result.

        * To specify (for *Note `REAL': floating-point-types.
          functions) the maximum number of decimal places in the result.

        * To specify whether the result can be `NULL'.

   * `xxx_deinit()'

     The deinitialization function for `xxx()'.  If present, it should
     deallocate any memory allocated by the initialization function.

When an SQL statement invokes `XXX()', MySQL calls the initialization
function `xxx_init()' to let it perform any required setup, such as
argument checking or memory allocation. If `xxx_init()' returns an
error, MySQL aborts the SQL statement with an error message and does
not call the main or deinitialization functions.  Otherwise, MySQL
calls the main function `xxx()' once for each row. After all rows have
been processed, MySQL calls the deinitialization function
`xxx_deinit()' so that it can perform any required cleanup.

For aggregate functions that work like `SUM()', you must also provide
the following functions:

   * `xxx_clear()'

     Reset the current aggregate value but do not insert the argument
     as the initial aggregate value for a new group.

   * `xxx_add()'

     Add the argument to the current aggregate value.

MySQL handles aggregate UDFs as follows:

  1. Call `xxx_init()' to let the aggregate function allocate any
     memory it needs for storing results.

  2. Sort the table according to the `GROUP BY' expression.

  3. Call `xxx_clear()' for the first row in each new group.

  4. Call `xxx_add()' for each row that belongs in the same group.

  5. Call `xxx()' to get the result for the aggregate when the group
     changes or after the last row has been processed.

  6. Repeat steps 3 to 5 until all rows has been processed

  7. Call `xxx_deinit()' to let the UDF free any memory it has
     allocated.

All functions must be thread-safe. This includes not just the main
function, but the initialization and deinitialization functions as
well, and also the additional functions required by aggregate
functions. A consequence of this requirement is that you are not
permitted to allocate any global or static variables that change! If
you need memory, you should allocate it in `xxx_init()' and free it in
`xxx_deinit()'.


File: manual.info,  Node: udf-calling,  Next: udf-aggr-calling,  Prev: adding-udf,  Up: adding-udf

23.3.2.1 UDF Calling Sequences for Simple Functions
...................................................

This section describes the different functions that you need to define
when you create a simple UDF.  *Note adding-udf::, describes the order
in which MySQL calls these functions.

The main `xxx()' function should be declared as shown in this section.
Note that the return type and parameters differ, depending on whether
you declare the SQL function `XXX()' to return `STRING', *Note
`INTEGER': integer-types, or *Note `REAL': floating-point-types. in the
*Note `CREATE FUNCTION': create-function. statement:

For `STRING' functions:

     char *xxx(UDF_INIT *initid, UDF_ARGS *args,
               char *result, unsigned long *length,
               char *is_null, char *error);

For *Note `INTEGER': integer-types. functions:

     long long xxx(UDF_INIT *initid, UDF_ARGS *args,
                   char *is_null, char *error);

For *Note `REAL': floating-point-types. functions:

     double xxx(UDF_INIT *initid, UDF_ARGS *args,
                   char *is_null, char *error);

*Note `DECIMAL': fixed-point-types. functions return string values and
should be declared the same way as `STRING' functions. `ROW' functions
are not implemented.

The initialization and deinitialization functions are declared like
this:

     my_bool xxx_init(UDF_INIT *initid, UDF_ARGS *args, char *message);

     void xxx_deinit(UDF_INIT *initid);

The `initid' parameter is passed to all three functions. It points to a
`UDF_INIT' structure that is used to communicate information between
functions. The `UDF_INIT' structure members follow. The initialization
function should fill in any members that it wishes to change. (To use
the default for a member, leave it unchanged.)

   * `my_bool maybe_null'

     `xxx_init()' should set `maybe_null' to `1' if `xxx()' can return
     `NULL'. The default value is `1' if any of the arguments are
     declared `maybe_null'.

   * `unsigned int decimals'

     The number of decimal digits to the right of the decimal point.
     The default value is the maximum number of decimal digits in the
     arguments passed to the main function. For example, if the
     function is passed `1.34', `1.345', and `1.3', the default would
     be 3, because `1.345' has 3 decimal digits.

     For arguments that have no fixed number of decimals, the
     `decimals' value is set to 31, which is 1 more than the maximum
     number of decimals permitted for the *Note `DECIMAL':
     fixed-point-types, *Note `FLOAT': floating-point-types, and *Note
     `DOUBLE': floating-point-types. data types. As of MySQL 5.5.3,
     this value is available as the constant `NOT_FIXED_DEC' in the
     `mysql_com.h' header file.

     A `decimals' value of 31 is used for arguments in cases such as a
     *Note `FLOAT': floating-point-types. or *Note `DOUBLE':
     floating-point-types. column declared without an explicit number
     of decimals (for example, *Note `FLOAT': floating-point-types.
     rather than `FLOAT(10,3)') and for floating-point constants such
     as `1345E-3'. It is also used for string and other nonnumber
     arguments that might be converted within the function to numeric
     form.

     The value to which the `decimals' member is initialized is only a
     default. It can be changed within the function to reflect the
     actual calculation performed.  The default is determined such that
     the largest number of decimals of the arguments is used. If the
     number of decimals is `NOT_FIXED_DEC' for even one of the
     arguments, that is the value used for `decimals'.

   * `unsigned int max_length'

     The maximum length of the result. The default `max_length' value
     differs depending on the result type of the function. For string
     functions, the default is the length of the longest argument. For
     integer functions, the default is 21 digits. For real functions,
     the default is 13 plus the number of decimal digits indicated by
     `initid->decimals'. (For numeric functions, the length includes
     any sign or decimal point characters.)

     If you want to return a blob value, you can set `max_length' to
     65KB or 16MB. This memory is not allocated, but the value is used
     to decide which data type to use if there is a need to temporarily
     store the data.

   * `char *ptr'

     A pointer that the function can use for its own purposes.  For
     example, functions can use `initid->ptr' to communicate allocated
     memory among themselves. `xxx_init()' should allocate the memory
     and assign it to this pointer:

          initid->ptr = allocated_memory;

     In `xxx()' and `xxx_deinit()', refer to `initid->ptr' to use or
     deallocate the memory.

   * `my_bool const_item'

     `xxx_init()' should set `const_item' to `1' if `xxx()' always
     returns the same value and to `0' otherwise.


File: manual.info,  Node: udf-aggr-calling,  Next: udf-arguments,  Prev: udf-calling,  Up: adding-udf

23.3.2.2 UDF Calling Sequences for Aggregate Functions
......................................................

This section describes the different functions that you need to define
when you create an aggregate UDF.  *Note adding-udf::, describes the
order in which MySQL calls these functions.

   * `xxx_reset()'

     This function is called when MySQL finds the first row in a new
     group. It should reset any internal summary variables and then use
     the given `UDF_ARGS' argument as the first value in your internal
     summary value for the group. Declare `xxx_reset()' as follows:

          void xxx_reset(UDF_INIT *initid, UDF_ARGS *args,
                         char *is_null, char *error);

     `xxx_reset()' is not needed or used in MySQL 5.5, in which the UDF
     interface uses `xxx_clear()' instead. However, you can define both
     `xxx_reset()' and `xxx_clear()' if you want to have your UDF work
     with older versions of the server. (If you do include both
     functions, the `xxx_reset()' function in many cases can be
     implemented internally by calling `xxx_clear()' to reset all
     variables, and then calling `xxx_add()' to add the `UDF_ARGS'
     argument as the first value in the group.)

   * `xxx_clear()'

     This function is called when MySQL needs to reset the summary
     results. It is called at the beginning for each new group but can
     also be called to reset the values for a query where there were no
     matching rows. Declare `xxx_clear()' as follows:

          void xxx_clear(UDF_INIT *initid, char *is_null, char *error);

     `is_null' is set to point to `CHAR(0)' before calling
     `xxx_clear()'.

     If something went wrong, you can store a value in the variable to
     which the `error' argument points. `error' points to a single-byte
     variable, not to a string buffer.

     `xxx_clear()' is required by MySQL 5.5.

   * `xxx_add()'

     This function is called for all rows that belong to the same
     group. You should use it to add the value in the `UDF_ARGS'
     argument to your internal summary variable.

          void xxx_add(UDF_INIT *initid, UDF_ARGS *args,
                       char *is_null, char *error);

The `xxx()' function for an aggregate UDF should be declared the same
way as for a nonaggregate UDF. See *Note udf-calling::.

For an aggregate UDF, MySQL calls the `xxx()' function after all rows
in the group have been processed. You should normally never access its
`UDF_ARGS' argument here but instead return a value based on your
internal summary variables.

Return value handling in `xxx()' should be done the same way as for a
nonaggregate UDF. See *Note udf-return-values::.

The `xxx_reset()' and `xxx_add()' functions handle their `UDF_ARGS'
argument the same way as functions for nonaggregate UDFs. See *Note
udf-arguments::.

The pointer arguments to `is_null' and `error' are the same for all
calls to `xxx_reset()', `xxx_clear()', `xxx_add()' and `xxx()'. You can
use this to remember that you got an error or whether the `xxx()'
function should return `NULL'. You should not store a string into
`*error'!  `error' points to a single-byte variable, not to a string
buffer.

`*is_null' is reset for each group (before calling `xxx_clear()').
`*error' is never reset.

If `*is_null' or `*error' are set when `xxx()' returns, MySQL returns
`NULL' as the result for the group function.


File: manual.info,  Node: udf-arguments,  Next: udf-return-values,  Prev: udf-aggr-calling,  Up: adding-udf

23.3.2.3 UDF Argument Processing
................................

The `args' parameter points to a `UDF_ARGS' structure that has the
members listed here:

   * `unsigned int arg_count'

     The number of arguments. Check this value in the initialization
     function if you require your function to be called with a
     particular number of arguments. For example:

          if (args->arg_count != 2)
          {
              strcpy(message,"XXX() requires two arguments");
              return 1;
          }

     For other `UDF_ARGS' member values that are arrays, array
     references are zero-based. That is, refer to array members using
     index values from 0 to `args->arg_count' - 1.

   * `enum Item_result *arg_type'

     A pointer to an array containing the types for each argument. The
     possible type values are `STRING_RESULT', `INT_RESULT',
     `REAL_RESULT', and `DECIMAL_RESULT'.

     To make sure that arguments are of a given type and return an
     error if they are not, check the `arg_type' array in the
     initialization function. For example:

          if (args->arg_type[0] != STRING_RESULT ||
              args->arg_type[1] != INT_RESULT)
          {
              strcpy(message,"XXX() requires a string and an integer");
              return 1;
          }

     Arguments of type `DECIMAL_RESULT' are passed as strings, so you
     should handle them the same way as `STRING_RESULT' values.

     As an alternative to requiring your function's arguments to be of
     particular types, you can use the initialization function to set
     the `arg_type' elements to the types you want. This causes MySQL
     to coerce arguments to those types for each call to `xxx()'. For
     example, to specify that the first two arguments should be coerced
     to string and integer, respectively, do this in `xxx_init()':

          args->arg_type[0] = STRING_RESULT;
          args->arg_type[1] = INT_RESULT;

     Exact-value decimal arguments such as `1.3' or *Note `DECIMAL':
     fixed-point-types. column values are passed with a type of
     `DECIMAL_RESULT'.  However, the values are passed as strings. If
     you want to receive a number, use the initialization function to
     specify that the argument should be coerced to a `REAL_RESULT'
     value:

          args->arg_type[2] = REAL_RESULT;

   * `char **args'

     `args->args' communicates information to the initialization
     function about the general nature of the arguments passed to your
     function. For a constant argument `i', `args->args[i]' points to
     the argument value. (See later for instructions on how to access
     the value properly.) For a nonconstant argument, `args->args[i]' is
     `0'. A constant argument is an expression that uses only
     constants, such as `3' or `4*7-2' or `SIN(3.14)'. A nonconstant
     argument is an expression that refers to values that may change
     from row to row, such as column names or functions that are called
     with nonconstant arguments.

     For each invocation of the main function, `args->args' contains
     the actual arguments that are passed for the row currently being
     processed.

     If argument `i' represents `NULL', `args->args[i]' is a null
     pointer (0).  If the argument is not `NULL', functions can refer
     to it as follows:

        * An argument of type `STRING_RESULT' is given as a string
          pointer plus a length, to enable handling of binary data or
          data of arbitrary length.  The string contents are available
          as `args->args[i]' and the string length is
          `args->lengths[i]'. Do not assume that the string is
          null-terminated.

        * For an argument of type `INT_RESULT', you must cast
          `args->args[i]' to a `long long' value:

               long long int_val;
               int_val = *((long long*) args->args[i]);

        * For an argument of type `REAL_RESULT', you must cast
          `args->args[i]' to a `double' value:

               double    real_val;
               real_val = *((double*) args->args[i]);

        * For an argument of type `DECIMAL_RESULT', the value is passed
          as a string and should be handled like a `STRING_RESULT'
          value.

        * `ROW_RESULT' arguments are not implemented.

   * `unsigned long *lengths'

     For the initialization function, the `lengths' array indicates the
     maximum string length for each argument. You should not change
     these. For each invocation of the main function, `lengths'
     contains the actual lengths of any string arguments that are
     passed for the row currently being processed. For arguments of
     types `INT_RESULT' or `REAL_RESULT', `lengths' still contains the
     maximum length of the argument (as for the initialization
     function).

   * `char *maybe_null'

     For the initialization function, the `maybe_null' array indicates
     for each argument whether the argument value might be null (0 if
     no, 1 if yes).

   * `char **attributes'

     `args->attributes' communicates information about the names of the
     UDF arguments. For argument `i', the attribute name is available
     as a string in `args->attributes[i]' and the attribute length is
     `args->attribute_lengths[i]'. Do not assume that the string is
     null-terminated.

     By default, the name of a UDF argument is the text of the
     expression used to specify the argument. For UDFs, an argument may
     also have an optional `[AS] ALIAS_NAME' clause, in which case the
     argument name is ALIAS_NAME. The `attributes' value for each
     argument thus depends on whether an alias was given.

     Suppose that a UDF `my_udf()' is invoked as follows:

          SELECT my_udf(expr1, expr2 AS alias1, expr3 alias2);

     In this case, the `attributes' and `attribute_lengths' arrays will
     have these values:

          args->attributes[0] = "expr1"
          args->attribute_lengths[0] = 5

          args->attributes[1] = "alias1"
          args->attribute_lengths[1] = 6

          args->attributes[2] = "alias2"
          args->attribute_lengths[2] = 6

   * `unsigned long *attribute_lengths'

     The `attribute_lengths' array indicates the length of each
     argument name.


File: manual.info,  Node: udf-return-values,  Next: udf-compiling,  Prev: udf-arguments,  Up: adding-udf

23.3.2.4 UDF Return Values and Error Handling
.............................................

The initialization function should return `0' if no error occurred and
`1' otherwise. If an error occurs, `xxx_init()' should store a
null-terminated error message in the `message' parameter. The message
is returned to the client. The message buffer is `MYSQL_ERRMSG_SIZE'
characters long, but you should try to keep the message to less than 80
characters so that it fits the width of a standard terminal screen.

The return value of the main function `xxx()' is the function value,
for `long long' and `double' functions. A string function should return
a pointer to the result and set `*length' to the length (in bytes) of
the return value. For example:

     memcpy(result, "result string", 13);
     *length = 13;

MySQL passes a buffer to the `xxx()' function using the `result'
parameter. This buffer is sufficiently long to hold 255 characters,
which can be multi-byte characters. The `xxx()' function can store the
result in this buffer if it fits, in which case the return value should
be a pointer to the buffer. If the function stores the result in a
different buffer, it should return a pointer to that buffer.

If your string function does not use the supplied buffer (for example,
if it needs to return a string longer than 255 characters), you must
allocate the space for your own buffer with `malloc()' in your
`xxx_init()' function or your `xxx()' function and free it in your
`xxx_deinit()' function. You can store the allocated memory in the
`ptr' slot in the `UDF_INIT' structure for reuse by future `xxx()'
calls. See *Note udf-calling::.

To indicate a return value of `NULL' in the main function, set
`*is_null' to `1':

     *is_null = 1;

To indicate an error return in the main function, set `*error' to `1':

     *error = 1;

If `xxx()' sets `*error' to `1' for any row, the function value is
`NULL' for the current row and for any subsequent rows processed by the
statement in which `XXX()' was invoked.  (`xxx()' is not even called
for subsequent rows.)


File: manual.info,  Node: udf-compiling,  Next: udf-security,  Prev: udf-return-values,  Up: adding-udf

23.3.2.5 Compiling and Installing User-Defined Functions
........................................................

Files implementing UDFs must be compiled and installed on the host
where the server runs. This process is described below for the example
UDF file `sql/udf_example.c' that is included in MySQL source
distributions.

If a UDF will be referred to in statements that will be replicated to
slave servers, you must ensure that every slave also has the function
available. Otherwise, replication will fail on the slaves when they
attempt to invoke the function.

The immediately following instructions are for Unix.  Instructions for
Windows are given later in this section.

The `udf_example.c' file contains the following functions:

   * `metaphon()' returns a metaphon string of the string argument.
     This is something like a soundex string, but it is more tuned for
     English.

   * `myfunc_double()' returns the sum of the ASCII values of the
     characters in its arguments, divided by the sum of the length of
     its arguments.

   * `myfunc_int()' returns the sum of the length of its arguments.

   * `sequence([const int])' returns a sequence starting from the given
     number or 1 if no number has been given.

   * `lookup()' returns the IP address for a host name.

   * `reverse_lookup()' returns the host name for an IP address. The
     function may be called either with a single string argument of the
     form `'xxx.xxx.xxx.xxx'' or with four numbers.

   * `avgcost()' returns an average cost. This is an aggregate function.

A dynamically loadable file should be compiled as a sharable object
file, using a command something like this:

     shell> gcc -shared -o udf_example.so udf_example.c

If you are using `gcc' with `CMake' (which is how MySQL is configured),
you should be able to create `udf_example.so' with a simpler command:

     shell> make udf_example

After you compile a shared object containing UDFs, you must install it
and tell MySQL about it. Compiling a shared object from `udf_example.c'
using `gcc' directly produces a file named `udf_example.so'. Copy the
shared object to the server's plugin directory and name it
`udf_example.so'. This directory is given by the value of the
`plugin_dir' system variable.

On some systems, the `ldconfig' program that configures the dynamic
linker does not recognize a shared object unless its name begins with
`lib'. In this case you should rename a file such as `udf_example.so' to
`libudf_example.so'.

On Windows, you can compile user-defined functions by using the
following procedure:

  1. Obtain a MySQL source distribution. See *Note getting-mysql::.

  2. Obtain the `CMake' build utility, if necessary, from
     `http://www.cmake.org'.  (Version 2.6 or later is required).

  3. In the source tree, look in the `sql' directory. There are files
     named `udf_example.def' `udf_example.c' there. Copy both files
     from this directory to your working directory.

  4. Create a `CMake' `makefile' (`CMakeLists.txt') with these contents:

          PROJECT(udf_example)

          # Path for MySQL include directory
          INCLUDE_DIRECTORIES("c:/mysql/include")

          ADD_DEFINITIONS("-DHAVE_DLOPEN")
          ADD_LIBRARY(udf_example MODULE udf_example.c udf_example.def)
          TARGET_LINK_LIBRARIES(udf_example wsock32)

  5. Create the VC project and solution files:

          cmake -G "<Generator>"

     Invoking `cmake --help' shows you a list of valid Generators.

  6. Create `udf_example.dll':

          devenv udf_example.sln /build Release

After the shared object file has been installed, notify *Note `mysqld':
mysqld. about the new functions with the following statements. If
object files have a suffix different from `.so' on your system,
substitute the correct suffix throughout (for example, `.dll' on
Windows).

     mysql> CREATE FUNCTION metaphon RETURNS STRING SONAME 'udf_example.so';
     mysql> CREATE FUNCTION myfunc_double RETURNS REAL SONAME 'udf_example.so';
     mysql> CREATE FUNCTION myfunc_int RETURNS INTEGER SONAME 'udf_example.so';
     mysql> CREATE FUNCTION sequence RETURNS INTEGER SONAME 'udf_example.so';
     mysql> CREATE FUNCTION lookup RETURNS STRING SONAME 'udf_example.so';
     mysql> CREATE FUNCTION reverse_lookup
         ->        RETURNS STRING SONAME 'udf_example.so';
     mysql> CREATE AGGREGATE FUNCTION avgcost
         ->        RETURNS REAL SONAME 'udf_example.so';

To delete functions, use *Note `DROP FUNCTION': drop-function.:

     mysql> DROP FUNCTION metaphon;
     mysql> DROP FUNCTION myfunc_double;
     mysql> DROP FUNCTION myfunc_int;
     mysql> DROP FUNCTION sequence;
     mysql> DROP FUNCTION lookup;
     mysql> DROP FUNCTION reverse_lookup;
     mysql> DROP FUNCTION avgcost;

The *Note `CREATE FUNCTION': create-function. and *Note `DROP
FUNCTION': drop-function. statements update the `func' system table in
the `mysql' database. The function's name, type and shared library name
are saved in the table. You must have the `INSERT' or `DELETE'
privilege for the `mysql' database to create or drop functions,
respectively.

You should not use *Note `CREATE FUNCTION': create-function. to add a
function that has previously been created. If you need to reinstall a
function, you should remove it with *Note `DROP FUNCTION':
drop-function.  and then reinstall it with *Note `CREATE FUNCTION':
create-function. You would need to do this, for example, if you
recompile a new version of your function, so that *Note `mysqld':
mysqld. gets the new version. Otherwise, the server continues to use
the old version.

An active function is one that has been loaded with *Note `CREATE
FUNCTION': create-function. and not removed with *Note `DROP FUNCTION':
drop-function. All active functions are reloaded each time the server
starts, unless you start *Note `mysqld': mysqld. with the
`--skip-grant-tables' option. In this case, UDF initialization is
skipped and UDFs are unavailable.


File: manual.info,  Node: udf-security,  Prev: udf-compiling,  Up: adding-udf

23.3.2.6 User-Defined Function Security Precautions
...................................................

MySQL takes several measures to prevent misuse of user-defined
functions.

UDF object files cannot be placed in arbitrary directories.  They must
be located in the server's plugin directory. This directory is given by
the value of the `plugin_dir' system variable.

To use *Note `CREATE FUNCTION': create-function. or *Note `DROP
FUNCTION': drop-function, you must have the `INSERT' or `DELETE'
privilege, respectively, for the `mysql' database. This is necessary
because those statements add and delete rows from the `mysql.func'
table.

UDFs should have at least one symbol defined in addition to the `xxx'
symbol that corresponds to the main `xxx()' function. These auxiliary
symbols correspond to the `xxx_init()', `xxx_deinit()', `xxx_reset()',
`xxx_clear()', and `xxx_add()' functions.  *Note `mysqld': mysqld. also
supports an `--allow-suspicious-udfs' option that controls whether UDFs
that have only an `xxx' symbol can be loaded. By default, the option is
off, to prevent attempts at loading functions from shared object files
other than those containing legitimate UDFs. If you have older UDFs
that contain only the `xxx' symbol and that cannot be recompiled to
include an auxiliary symbol, it may be necessary to specify the
`--allow-suspicious-udfs' option. Otherwise, you should avoid enabling
this capability.


File: manual.info,  Node: adding-native-function,  Prev: adding-udf,  Up: adding-functions

23.3.3 Adding a New Native Function
-----------------------------------

To add a new native MySQL function, use the procedure described here,
which requires that you use a source distribution. You cannot add
native functions to a binary distribution because it is necessary to
modify MySQL source code and compile MySQL from the modified source. If
you migrate to another version of MySQL (for example, when a new
version is released), you must repeat the procedure with the new
version.

If the new native function will be referred to in statements that will
be replicated to slave servers, you must ensure that every slave server
also has the function available. Otherwise, replication will fail on
the slaves when they attempt to invoke the function.

To add a new native function, follow these steps to modify source files
in the `sql' directory:

  1. Create a subclass for the function in `item_create.cc':

        * If the function takes a fixed number of arguments, create a
          subclass of `Create_func_arg0', `Create_func_arg1',
          `Create_func_arg2', or `Create_func_arg3', respectively,
          depending on whether the function takes zero, one, two, or
          three arguments. For examples, see the `Create_func_uuid',
          `Create_func_abs', `Create_func_pow', and `Create_func_lpad'
          classes.

        * If the function takes a variable number of arguments, create
          a subclass of `Create_native_func'. For an example, see
          `Create_func_concat'.

  2. To provide a name by which the function can be referred to in SQL
     statements, register the name in `item_create.cc' by adding a line
     to this array:

          static Native_func_registry func_array[]

     You can register several names for the same function. For example,
     see the lines for `"LCASE"' and `"LOWER"', which are aliases for
     `Create_func_lcase'.

  3. In `item_func.h', declare a class inheriting from `Item_num_func'
     or `Item_str_func', depending on whether your function returns a
     number or a string.

  4. In `item_func.cc', add one of the following declarations,
     depending on whether you are defining a numeric or string function:

          double   Item_func_newname::val()
          longlong Item_func_newname::val_int()
          String  *Item_func_newname::Str(String *str)

     If you inherit your object from any of the standard items (like
     `Item_num_func'), you probably only have to define one of these
     functions and let the parent object take care of the other
     functions. For example, the `Item_str_func' class defines a
     `val()' function that executes `atof()' on the value returned by
     `::str()'.

  5. If the function is nondeterministic, include the following
     statement in the item constructor to indicate that function
     results should not be cached:

          current_thd->lex->safe_to_cache_query=0;

     A function is nondeterministic if, given fixed values for its
     arguments, it can return different results for different
     invocations.

  6. You should probably also define the following object function:

          void Item_func_newname::fix_length_and_dec()

     This function should at least calculate `max_length' based on the
     given arguments.  `max_length' is the maximum number of characters
     the function may return. This function should also set `maybe_null
     = 0' if the main function can't return a `NULL' value. The
     function can check whether any of the function arguments can
     return `NULL' by checking the arguments' `maybe_null' variable.
     Look at `Item_func_mod::fix_length_and_dec' for a typical example
     of how to do this.

All functions must be thread-safe. In other words, do not use any
global or static variables in the functions without protecting them
with mutexes.

If you want to return `NULL' from `::val()', `::val_int()', or
`::str()', you should set `null_value' to 1 and return 0.

For `::str()' object functions, there are additional considerations to
be aware of:

   * The `String *str' argument provides a string buffer that may be
     used to hold the result. (For more information about the `String'
     type, take a look at the `sql_string.h' file.)

   * The `::str()' function should return the string that holds the
     result, or `(char*) 0' if the result is `NULL'.

   * All current string functions try to avoid allocating any memory
     unless absolutely necessary!


File: manual.info,  Node: porting,  Prev: adding-functions,  Up: extending-mysql

23.4 Debugging and Porting MySQL
================================

* Menu:

* debugging-server::             Debugging a MySQL Server
* debugging-client::             Debugging a MySQL Client
* dbug-package::                 The DBUG Package

This section helps you port MySQL to other operating systems. Do check
the list of currently supported operating systems first. See *Note
supported-os::. If you have created a new port of MySQL, please let us
know so that we can list it here and on our Web site
(http://www.mysql.com/), recommending it to other users.

*Note*:

If you create a new port of MySQL, you are free to copy and distribute
it under the GPL license, but it does not make you a copyright holder
of MySQL.

A working POSIX thread library is needed for the server.

To build MySQL from source, your system must satisfy the tool
requirements listed at *Note source-installation::.

*Important*:

If you are trying to build MySQL 5.5 with `icc' on the IA64 platform,
and need support for MySQL Cluster, you should first ensure that you
are using `icc' version 9.1.043 or later. (For details, see Bug #21875.)

If you run into problems with a new port, you may have to do some
debugging of MySQL! See *Note debugging-server::.

*Note*:

Before you start debugging *Note `mysqld': mysqld, first get the test
programs `mysys/thr_alarm' and `mysys/thr_lock' to work. This ensures
that your thread installation has even a remote chance to work!


File: manual.info,  Node: debugging-server,  Next: debugging-client,  Prev: porting,  Up: porting

23.4.1 Debugging a MySQL Server
-------------------------------

* Menu:

* compiling-for-debugging::      Compiling MySQL for Debugging
* making-trace-files::           Creating Trace Files
* making-windows-dumps::         Using `pdb' to create a Windows crashdump
* using-gdb-on-mysqld::          Debugging `mysqld' under `gdb'
* using-stack-trace::            Using a Stack Trace
* using-log-files::              Using Server Logs to Find Causes of Errors in `mysqld'
* reproducible-test-case::       Making a Test Case If You Experience Table Corruption

If you are using some functionality that is very new in MySQL, you can
try to run *Note `mysqld': mysqld. with the `--skip-new' (which
disables all new, potentially unsafe functionality). See *Note
crashing::.

If *Note `mysqld': mysqld. doesn't want to start, you should verify
that you don't have any `my.cnf' files that interfere with your setup!
You can check your `my.cnf' arguments with *Note `mysqld
--print-defaults': mysqld. and avoid using them by starting with *Note
`mysqld --no-defaults ...': mysqld.

If *Note `mysqld': mysqld. starts to eat up CPU or memory or if it
`hangs,' you can use *Note `mysqladmin processlist status': mysqladmin.
to find out if someone is executing a query that takes a long time. It
may be a good idea to run *Note `mysqladmin -i10 processlist status':
mysqladmin. in some window if you are experiencing performance problems
or problems when new clients can't connect.

The command *Note `mysqladmin debug': mysqladmin. dumps some
information about locks in use, used memory and query usage to the
MySQL log file. This may help solve some problems. This command also
provides some useful information even if you haven't compiled MySQL for
debugging!

If the problem is that some tables are getting slower and slower you
should try to optimize the table with *Note `OPTIMIZE TABLE':
optimize-table. or *Note `myisamchk': myisamchk. See *Note
server-administration::. You should also check the slow queries with
*Note `EXPLAIN': explain.

You should also read the OS-specific section in this manual for
problems that may be unique to your environment. See *Note
general-installation-issues::.


File: manual.info,  Node: compiling-for-debugging,  Next: making-trace-files,  Prev: debugging-server,  Up: debugging-server

23.4.1.1 Compiling MySQL for Debugging
......................................

If you have some very specific problem, you can always try to debug
MySQL. To do this you must configure MySQL with the `-DWITH_DEBUG=1'
option. You can check whether MySQL was compiled with debugging by
doing: *Note `mysqld --help': mysqld. If the `--debug' flag is listed
with the options then you have debugging enabled. *Note `mysqladmin
ver': mysqladmin. also lists the *Note `mysqld': mysqld. version as
*Note `mysql ... --debug': mysql. in this case.

If *Note `mysqld': mysqld. stops crashing when you compile it with
`-DWITH_DEBUG=1', you probably have found a compiler bug or a timing
bug within MySQL. In this case, you can try to add `-g' to the `CFLAGS'
and `CXXFLAGS' environment variables and not use `-DWITH_DEBUG=1'. If
*Note `mysqld': mysqld. dies, you can at least attach to it with `gdb'
or use `gdb' on the core file to find out what happened.

When you configure MySQL for debugging you automatically enable a lot
of extra safety check functions that monitor the health of *Note
`mysqld': mysqld. If they find something `unexpected,' an entry is
written to `stderr', which *Note `mysqld_safe': mysqld-safe. directs to
the error log! This also means that if you are having some unexpected
problems with MySQL and are using a source distribution, the first
thing you should do is to configure MySQL for debugging! (The second
thing is to send mail to a MySQL mailing list and ask for help. See
*Note mailing-lists::. If you believe that you have found a bug, please
use the instructions at *Note bug-reports::.

In the Windows MySQL distribution, `mysqld.exe' is by default compiled
with support for trace files.


File: manual.info,  Node: making-trace-files,  Next: making-windows-dumps,  Prev: compiling-for-debugging,  Up: debugging-server

23.4.1.2 Creating Trace Files
.............................

If the *Note `mysqld': mysqld. server doesn't start or if you can cause
it to crash quickly, you can try to create a trace file to find the
problem.

To do this, you must have a *Note `mysqld': mysqld. that has been
compiled with debugging support. You can check this by executing
`mysqld -V'. If the version number ends with `-debug', it is compiled
with support for trace files. (On Windows, the debugging server is
named *Note `mysqld-debug': mysqld. rather than *Note `mysqld': mysqld.
as of MySQL 4.1.)

Start the *Note `mysqld': mysqld. server with a trace log in
`/tmp/mysqld.trace' on Unix or `C:\mysqld.trace' on Windows:

     shell> mysqld --debug

On Windows, you should also use the `--standalone' flag to not start
*Note `mysqld': mysqld. as a service. In a console window, use this
command:

     C:\> mysqld-debug --debug --standalone

After this, you can use the `mysql.exe' command-line tool in a second
console window to reproduce the problem. You can stop the *Note
`mysqld': mysqld. server with *Note `mysqladmin shutdown': mysqladmin.

The trace file can become *very large*! To generate a smaller trace
file, you can use debugging options something like this:

*Note `mysqld
--debug=d,info,error,query,general,where:O,/tmp/mysqld.trace': mysqld.

This only prints information with the most interesting tags to the
trace file.

If you make a bug report about this, please only send the lines from
the trace file to the appropriate mailing list where something seems to
go wrong! If you can't locate the wrong place, you can open a bug
report and upload the trace file to the report, so that a MySQL
developer can take a look at it. For instructions, see *Note
bug-reports::.

The trace file is made with the *DBUG* package by Fred Fish.  See *Note
dbug-package::.


File: manual.info,  Node: making-windows-dumps,  Next: using-gdb-on-mysqld,  Prev: making-trace-files,  Up: debugging-server

23.4.1.3 Using `pdb' to create a Windows crashdump
..................................................

Program Database files (extension `pdb') are included in the Noinstall
distribution of MySQL. These files provide information for debugging
your MySQL installation in the event of a problem.

The PDB file contains more detailed information about `mysqld' and
other tools that enables more detailed trace and dump files to be
created. You can use these with Dr Watson, `WinDbg' and Visual Studio to
debug *Note `mysqld': mysqld.

For more information on PDB files, see Microsoft Knowledge Base Article
121366 (http://support.microsoft.com/kb/121366/). For more information
on the debugging options available, see Debugging Tools for Windows
(http://www.microsoft.com/whdc/devtools/debugging/default.mspx).

Dr Watson is installed with all Windows distributions, but if you have
installed Windows development tools, Dr Watson may have been replaced
with WinDbg, the debugger included with Visual Studio, or the debugging
tools provided with Borland or Delphi.

To generate a crash file using Dr Watson, follow these steps:

  1. Start Dr Watson by running `drwtsn32.exe' interactively using the
     `-i' option:

          C:\> drwtsn32 -i

  2. Set the `Log File Path' to the directory where you want to store
     trace files.

  3. Make sure `Dump All Thread Contexts' and `Append To Existing Log
     File'.

  4. Uncheck `Dump Symbol Table', `Visual Notification', `Sound
     Notification' and `Create Crash Dump File'.

  5. Set the `Number of Instructions' to a suitable value to capture
     enough calls in the stacktrace.  A value of at 25 should be enough.

Note that the file generated can become very large.


File: manual.info,  Node: using-gdb-on-mysqld,  Next: using-stack-trace,  Prev: making-windows-dumps,  Up: debugging-server

23.4.1.4 Debugging `mysqld' under `gdb'
.......................................

On most systems you can also start *Note `mysqld': mysqld.  from `gdb'
to get more information if *Note `mysqld': mysqld. crashes.

With some older `gdb' versions on Linux you must use `run --one-thread'
if you want to be able to debug *Note `mysqld': mysqld. threads. In
this case, you can only have one thread active at a time. It is best to
upgrade to `gdb' 5.1 because thread debugging works much better with
this version!

NPTL threads (the new thread library on Linux) may cause problems while
running *Note `mysqld': mysqld. under `gdb'. Some symptoms are:

   * *Note `mysqld': mysqld. hangs during startup (before it writes
     `ready for connections').

   * *Note `mysqld': mysqld. crashes during a `pthread_mutex_lock()' or
     `pthread_mutex_unlock()' call.

In this case, you should set the following environment variable in the
shell before starting `gdb':

     LD_ASSUME_KERNEL=2.4.1
     export LD_ASSUME_KERNEL

When running *Note `mysqld': mysqld. under `gdb', you should disable
the stack trace with `--skip-stack-trace' to be able to catch segfaults
within `gdb'.

In MySQL 4.0.14 and above you should use the `--gdb' option to *Note
`mysqld': mysqld. This installs an interrupt handler for `SIGINT'
(needed to stop *Note `mysqld': mysqld. with `^C' to set breakpoints)
and disable stack tracing and core file handling.

It is very hard to debug MySQL under `gdb' if you do a lot of new
connections the whole time as `gdb' doesn't free the memory for old
threads. You can avoid this problem by starting *Note `mysqld': mysqld.
with `thread_cache_size' set to a value equal to `max_connections' + 1.
In most cases just using `--thread_cache_size=5'' helps a lot!

If you want to get a core dump on Linux if *Note `mysqld': mysqld. dies
with a SIGSEGV signal, you can start *Note `mysqld': mysqld. with the
`--core-file' option. This core file can be used to make a backtrace
that may help you find out why *Note `mysqld': mysqld. died:

     shell> gdb mysqld core
     gdb>   backtrace full
     gdb>   quit

See *Note crashing::.

If you are using `gdb' 4.17.x or above on Linux, you should install a
`.gdb' file, with the following information, in your current directory:

     set print sevenbit off
     handle SIGUSR1 nostop noprint
     handle SIGUSR2 nostop noprint
     handle SIGWAITING nostop noprint
     handle SIGLWP nostop noprint
     handle SIGPIPE nostop
     handle SIGALRM nostop
     handle SIGHUP nostop
     handle SIGTERM nostop noprint

If you have problems debugging threads with `gdb', you should download
gdb 5.x and try this instead. The new `gdb' version has very improved
thread handling!

Here is an example how to debug *Note `mysqld': mysqld.:

     shell> gdb /usr/local/libexec/mysqld
     gdb> run
     ...
     backtrace full # Do this when mysqld crashes

Include the preceding output in a bug report, which you can file using
the instructions in *Note bug-reports::.

If *Note `mysqld': mysqld. hangs, you can try to use some system tools
like `strace' or `/usr/proc/bin/pstack' to examine where *Note
`mysqld': mysqld. has hung.

     strace /tmp/log libexec/mysqld

If you are using the Perl `DBI' interface, you can turn on debugging
information by using the `trace' method or by setting the `DBI_TRACE'
environment variable.


File: manual.info,  Node: using-stack-trace,  Next: using-log-files,  Prev: using-gdb-on-mysqld,  Up: debugging-server

23.4.1.5 Using a Stack Trace
............................

On some operating systems, the error log contains a stack trace if
*Note `mysqld': mysqld. dies unexpectedly. You can use this to find out
where (and maybe why) *Note `mysqld': mysqld. died. See *Note
error-log::. To get a stack trace, you must not compile *Note `mysqld':
mysqld. with the `-fomit-frame-pointer' option to gcc. See *Note
compiling-for-debugging::.

A stack trace in the error log looks something like this:

     mysqld got signal 11;
     Attempting backtrace. You can use the following information
     to find out where mysqld died. If you see no messages after
     this, something went terribly wrong...

     stack_bottom = 0x41fd0110 thread_stack 0x40000
     mysqld(my_print_stacktrace+0x32)[0x9da402]
     mysqld(handle_segfault+0x28a)[0x6648e9]
     /lib/libpthread.so.0[0x7f1a5af000f0]
     /lib/libc.so.6(strcmp+0x2)[0x7f1a5a10f0f2]
     mysqld(_Z21check_change_passwordP3THDPKcS2_Pcj+0x7c)[0x7412cb]
     mysqld(_ZN16set_var_password5checkEP3THD+0xd0)[0x688354]
     mysqld(_Z17sql_set_variablesP3THDP4ListI12set_var_baseE+0x68)[0x688494]
     mysqld(_Z21mysql_execute_commandP3THD+0x41a0)[0x67a170]
     mysqld(_Z11mysql_parseP3THDPKcjPS2_+0x282)[0x67f0ad]
     mysqld(_Z16dispatch_command19enum_server_commandP3THDPcj+0xbb7[0x67fdf8]
     mysqld(_Z10do_commandP3THD+0x24d)[0x6811b6]
     mysqld(handle_one_connection+0x11c)[0x66e05e]

If resolution of function names for the trace fails, the trace contains
less information:

     mysqld got signal 11;
     Attempting backtrace. You can use the following information
     to find out where mysqld died. If you see no messages after
     this, something went terribly wrong...

     stack_bottom = 0x41fd0110 thread_stack 0x40000
     [0x9da402]
     [0x6648e9]
     [0x7f1a5af000f0]
     [0x7f1a5a10f0f2]
     [0x7412cb]
     [0x688354]
     [0x688494]
     [0x67a170]
     [0x67f0ad]
     [0x67fdf8]
     [0x6811b6]
     [0x66e05e]

In the latter case, you can use the *Note `resolve_stack_dump':
resolve-stack-dump. utility to determine where *Note `mysqld': mysqld.
died by using the following procedure:

  1. Copy the numbers from the stack trace to a file, for example
     `mysqld.stack'. The numbers should not include the surrounding
     square brackets:

          0x9da402
          0x6648e9
          0x7f1a5af000f0
          0x7f1a5a10f0f2
          0x7412cb
          0x688354
          0x688494
          0x67a170
          0x67f0ad
          0x67fdf8
          0x6811b6
          0x66e05e

  2. Make a symbol file for the *Note `mysqld': mysqld.  server:

          shell> nm -n libexec/mysqld > /tmp/mysqld.sym

     If *Note `mysqld': mysqld. is not linked statically, use the
     following command instead:

          shell> nm -D -n libexec/mysqld > /tmp/mysqld.sym

     If you want to decode C++ symbols, use the `--demangle', if
     available, to `nm'. If your version of `nm' does not have this
     option, you will need to use the `c++filt' command after the stack
     dump has been produced to demangle the C++ names.

  3. Execute the following command:

          shell> resolve_stack_dump -s /tmp/mysqld.sym -n mysqld.stack

     If you were not able to include demangled C++ names in your symbol
     file, process the *Note `resolve_stack_dump': resolve-stack-dump.
     output using `c++filt':

          shell> resolve_stack_dump -s /tmp/mysqld.sym -n mysqld.stack | c++filt

     This prints out where *Note `mysqld': mysqld. died. If that does
     not help you find out why *Note `mysqld': mysqld. died, you should
     create a bug report and include the output from the preceding
     command with the bug report.

     However, in most cases it does not help us to have just a stack
     trace to find the reason for the problem. To be able to locate the
     bug or provide a workaround, in most cases we need to know the
     statement that killed *Note `mysqld': mysqld. and preferably a
     test case so that we can repeat the problem! See *Note
     bug-reports::.

Newer versions of `glibc' stack trace functions also print the address
as relative to the object. On `glibc'-based systems (Linux), the trace
for a crash within a plugin looks something like:

     plugin/auth/auth_test_plugin.so(+0x9a6)[0x7ff4d11c29a6]

To translate the relative address (`+0x9a6') into a file name and line
number, use this command:

     shell> addr2line -fie auth_test_plugin.so 0x9a6
     auth_test_plugin
     mysql-trunk/plugin/auth/test_plugin.c:65

The `addr2line' utility is part of the `binutils' package on Linux.

On Solaris, the procedure is similar. The Solaris `printstack()'
already prints relative addresses:

     plugin/auth/auth_test_plugin.so:0x1510

To translate, use this command:

     shell> gaddr2line -fie auth_test_plugin.so 0x1510
     mysql-trunk/plugin/auth/test_plugin.c:88

Windows already prints the address, function name and line:

     000007FEF07E10A4 auth_test_plugin.dll!auth_test_plugin()[test_plugin.c:72]


File: manual.info,  Node: using-log-files,  Next: reproducible-test-case,  Prev: using-stack-trace,  Up: debugging-server

23.4.1.6 Using Server Logs to Find Causes of Errors in `mysqld'
...............................................................

Note that before starting *Note `mysqld': mysqld. with the general
query log enabled, you should check all your tables with *Note
`myisamchk': myisamchk. See *Note server-administration::.

If *Note `mysqld': mysqld. dies or hangs, you should start *Note
`mysqld': mysqld. with the general query log enabled.  See *Note
query-log::. When *Note `mysqld': mysqld. dies again, you can examine
the end of the log file for the query that killed *Note `mysqld':
mysqld.

If you use the default general query log file, the log is stored in the
database directory as `HOST_NAME.log' In most cases it is the last
query in the log file that killed *Note `mysqld': mysqld, but if
possible you should verify this by restarting *Note `mysqld': mysqld.
and executing the found query from the *Note `mysql': mysql.
command-line tools. If this works, you should also test all complicated
queries that didn't complete.

You can also try the command *Note `EXPLAIN': explain. on all *Note
`SELECT': select. statements that takes a long time to ensure that
*Note `mysqld': mysqld. is using indexes properly. See *Note explain::.

You can find the queries that take a long time to execute by starting
*Note `mysqld': mysqld. with the slow query log enabled. See *Note
slow-query-log::.

If you find the text `mysqld restarted' in the error log file (normally
named `hostname.err') you probably have found a query that causes *Note
`mysqld': mysqld. to fail. If this happens, you should check all your
tables with *Note `myisamchk': myisamchk. (see *Note
server-administration::), and test the queries in the MySQL log files
to see whether one fails. If you find such a query, try first upgrading
to the newest MySQL version.  If this doesn't help and you can't find
anything in the `mysql' mail archive, you should report the bug to a
MySQL mailing list. The mailing lists are described at
`http://lists.mysql.com/', which also has links to online list archives.

If you have started *Note `mysqld': mysqld. with
`--myisam-recover-options', MySQL automatically checks and tries to
repair `MyISAM' tables if they are marked as 'not closed properly' or
'crashed'. If this happens, MySQL writes an entry in the `hostname.err'
file `'Warning: Checking table ...'' which is followed by `Warning:
Repairing table' if the table needs to be repaired. If you get a lot of
these errors, without *Note `mysqld': mysqld. having died unexpectedly
just before, then something is wrong and needs to be investigated
further. See *Note server-options::.

As of MySQL 5.5.3, when the server detects `MyISAM' table corruption,
it writes additional information to the error log, such as the name and
line number of the source file, and the list of threads accessing the
table. Example: `Got an error from thread_id=1, mi_dynrec.c:368'. This
is useful information to include in bug reports.

It is not a good sign if *Note `mysqld': mysqld. did die unexpectedly,
but in this case, you should not investigate the `Checking table...'
messages, but instead try to find out why *Note `mysqld': mysqld. died.


File: manual.info,  Node: reproducible-test-case,  Prev: using-log-files,  Up: debugging-server

23.4.1.7 Making a Test Case If You Experience Table Corruption
..............................................................

If you get corrupted tables or if *Note `mysqld': mysqld.  always fails
after some update commands, you can test whether this bug is
reproducible by doing the following:

   * Take down the MySQL daemon (with *Note `mysqladmin shutdown':
     mysqladmin.).

   * Make a backup of the tables (to guard against the very unlikely
     case that the repair does something bad).

   * Check all tables with *Note `myisamchk -s database/*.MYI':
     myisamchk. Repair any wrong tables with *Note `myisamchk -r
     database/TABLE.MYI': myisamchk.

   * Make a second backup of the tables.

   * Remove (or move away) any old log files from the MySQL data
     directory if you need more space.

   * Start *Note `mysqld': mysqld. with the binary log enabled. If you
     want to find a query that crashes *Note `mysqld': mysqld, you
     should start the server with both the general query log enabled as
     well. See *Note query-log::, and *Note binary-log::.

   * When you have gotten a crashed table, stop the `mysqld server'.

   * Restore the backup.

   * Restart the *Note `mysqld': mysqld. server *without* the binary log
     enabled.

   * Re-execute the commands with *Note `mysqlbinlog binary-log-file |
     mysql': mysqlbinlog. The binary log is saved in the MySQL database
     directory with the name `hostname-bin.NNNNNN'.

   * If the tables are corrupted again or you can get *Note `mysqld':
     mysqld. to die with the above command, you have found reproducible
     bug that should be easy to fix! FTP the tables and the binary log
     to our bugs database using the instructions given in *Note
     bug-reports::. If you are a support customer, you can use the
     MySQL Customer Support Center `https://support.mysql.com/' to
     alert the MySQL team about the problem and have it fixed as soon as
     possible.

You can also use the script *Note `mysql_find_rows': mysql-find-rows.
to just execute some of the update statements if you want to narrow
down the problem.


File: manual.info,  Node: debugging-client,  Next: dbug-package,  Prev: debugging-server,  Up: porting

23.4.2 Debugging a MySQL Client
-------------------------------

To be able to debug a MySQL client with the integrated debug package,
you should configure MySQL with `-DWITH_DEBUG=1'. See *Note
source-configuration-options::.

Before running a client, you should set the `MYSQL_DEBUG' environment
variable:

     shell> MYSQL_DEBUG=d:t:O,/tmp/client.trace
     shell> export MYSQL_DEBUG

This causes clients to generate a trace file in `/tmp/client.trace'.

If you have problems with your own client code, you should attempt to
connect to the server and run your query using a client that is known
to work. Do this by running *Note `mysql': mysql. in debugging mode
(assuming that you have compiled MySQL with debugging on):

     shell> mysql --debug=d:t:O,/tmp/client.trace

This provides useful information in case you mail a bug report.  See
*Note bug-reports::.

If your client crashes at some 'legal' looking code, you should check
that your `mysql.h' include file matches your MySQL library file. A
very common mistake is to use an old `mysql.h' file from an old MySQL
installation with new MySQL library.


File: manual.info,  Node: dbug-package,  Prev: debugging-client,  Up: porting

23.4.3 The DBUG Package
-----------------------

The MySQL server and most MySQL clients are compiled with the DBUG
package originally created by Fred Fish. When you have configured MySQL
for debugging, this package makes it possible to get a trace file of
what the program is doing. See *Note making-trace-files::.

This section summarizes the argument values that you can specify in
debug options on the command line for MySQL programs that have been
built with debugging support. For more information about programming
with the DBUG package, see the DBUG manual in the `dbug' directory of
MySQL source distributions. It's best to use a recent distribution to
get the most updated DBUG manual.

The DBUG package can be used by invoking a program with the
`--debug[=DEBUG_OPTIONS]' or `-# [DEBUG_OPTIONS]' option. If you
specify the `--debug' or `-#' option without a DEBUG_OPTIONS value,
most MySQL programs use a default value, typically
`d:t:i:o,PROGRAM_NAME.trace', the effect of which is:

   * `d': Enable output for all debug macros

   * `t': Trace function calls and exits

   * `i': Add PID to output lines

   * `o,PROGRAM_NAME.trace': Set the debug output file to
     `PROGRAM_NAME.trace' The default trace file is usually
     `/tmp/PROGRAM_NAME.trace' on Unix and `\PROGRAM_NAME.trace' on
     Windows.

Here are some example debug control strings as they might be specified
on a shell command line:

     --debug=d:t
     --debug=d:f,main,subr1:F:L:t,20
     --debug=d,input,output,files:n
     --debug=d:t:i:O,\\mysqld.trace

For *Note `mysqld': mysqld, it is also possible to change DBUG settings
at runtime by setting the `debug' system variable. This variable has
global and session values:

     mysql> SET GLOBAL debug = 'DEBUG_OPTIONS';
     mysql> SET SESSION debug = 'DEBUG_OPTIONS';

Changes at runtime require the `SUPER' privilege, even for the session
value.

The DEBUG_OPTIONS value is a sequence of colon-separated fields:

     field_1:field_2:...:field_N

Each field within the value consists of a mandatory flag character,
optionally preceded by a `+' or `-' character, and optionally followed
by a comma-delimited list of modifiers:

     [+|-]flag[,modifier,modifier,...,modifier]

The following table describes the permitted flag characters.
Unrecognized flag characters are silently ignored.

*Flag*                                                     *Description*
`d'                                                        Enable output from DBUG_XXX macros for the current state. May be
                                                           followed by a list of keywords, which enables output only for the
                                                           DBUG macros with that keyword. An empty list of keywords enables
                                                           output for all macros.
                                                           
                                                           In MySQL, common debug macro keywords to enable are `enter',
                                                           `exit', `error', `warning', `info', and `loop'.
`D'                                                        Delay after each debugger output line. The argument is the delay,
                                                           in tenths of seconds, subject to machine capabilities. For
                                                           example, `D,20' specifies a delay of two seconds.
`f'                                                        Limit debugging, tracing, and profiling to the list of named
                                                           functions. An empty list enables all functions.  The appropriate
                                                           `d' or `t' flags must still be given; this flag only limits their
                                                           actions if they are enabled.
`F'                                                        Identify the source file name for each line of debug or trace
                                                           output.
`i'                                                        Identify the process with the PID or thread ID for each line of
                                                           debug or trace output.
`L'                                                        Identify the source file line number for each line of debug or
                                                           trace output.
`n'                                                        Print the current function nesting depth for each line of debug
                                                           or trace output.
`N'                                                        Number each line of debug output.
`o'                                                        Redirect the debugger output stream to the specified file. The
                                                           default output is `stderr'.
`O'                                                        Like `o', but the file is really flushed between each write. When
                                                           needed, the file is closed and reopened between each write.
`p'                                                        Limit debugger actions to specified processes. A process must be
                                                           identified with the `DBUG_PROCESS' macro and match one in the
                                                           list for debugger actions to occur.
`P'                                                        Print the current process name for each line of debug or trace
                                                           output.
`r'                                                        When pushing a new state, do not inherit the previous state's
                                                           function nesting level. Useful when the output is to start at the
                                                           left margin.
`S'                                                        Do function `_sanity(_file_,_line_)' at each debugged function
                                                           until `_sanity()' returns something that differs from 0.
`t'                                                        Enable function call/exit trace lines. May be followed by a list
                                                           (containing only one modifier) giving a numeric maximum trace
                                                           level, beyond which no output occurs for either debugging or
                                                           tracing macros. The default is a compile time option.

The leading `+' or `-' character and trailing list of modifiers are
used for flag characters such as `d' or `f' that can enable a debug
operation for all applicable modifiers or just some of them:

   * With no leading `+' or `-', the flag value is set to exactly the
     modifier list as given.

   * With a leading `+' or `-', the modifiers in the list are added to
     or subtracted from the current modifier list.

The following examples show how this works for the `d' flag. An empty
`d' list enabled output for all debug macros. A nonempty list enables
output only for the macro keywords in the list.

These statements set the `d' value to the modifier list as given:

     mysql> SET debug = 'd';
     mysql> SELECT @@debug;
     +---------+
     | @@debug |
     +---------+
     | d       |
     +---------+
     mysql> SET debug = 'd,error,warning';
     mysql> SELECT @@debug;
     +-----------------+
     | @@debug         |
     +-----------------+
     | d,error,warning |
     +-----------------+

A leading `+' or `-' adds to or subtracts from the current `d' value:

     mysql> SET debug = '+d,loop';
     mysql> SELECT @@debug;
     +----------------------+
     | @@debug              |
     +----------------------+
     | d,error,warning,loop |
     +----------------------+
     mysql> SET debug = '-d,error,loop';
     mysql> SELECT @@debug;
     +-----------+
     | @@debug   |
     +-----------+
     | d,warning |
     +-----------+

Adding to `all macros enabled' results in no change:

     mysql> SET debug = 'd';
     mysql> SELECT @@debug;
     +---------+
     | @@debug |
     +---------+
     | d       |
     +---------+
     mysql> SET debug = '+d,loop';
     mysql> SELECT @@debug;
     +---------+
     | @@debug |
     +---------+
     | d       |
     +---------+

Disabling all enabled macros disables the `d' flag entirely:

     mysql> SET debug = 'd,error,loop';
     mysql> SELECT @@debug;
     +--------------+
     | @@debug      |
     +--------------+
     | d,error,loop |
     +--------------+
     mysql> SET debug = '-d,error,loop';
     mysql> SELECT @@debug;
     +---------+
     | @@debug |
     +---------+
     |         |
     +---------+

*Note*:

The `+' and `-' modifiers are not always handled correctly and can
leave a flag value in an incorrect state. Verify your `debug'-setting
sequence in advance or set it without using `+' or `-'.


File: manual.info,  Node: mysql-enterprise,  Next: workbench,  Prev: extending-mysql,  Up: Top

24 MySQL Enterprise Edition
***************************

* Menu:

* mysql-enterprise-monitor::     MySQL Enterprise Monitor
* mysql-enterprise-backup::      MySQL Enterprise Backup
* mysql-enterprise-security::    MySQL Enterprise Security
* mysql-enterprise-audit::       MySQL Enterprise Audit
* mysql-enterprise-thread-pool::  MySQL Enterprise Thread Pool

MySQL Enterprise Edition is a commercial product. Like MySQL Community
Edition, MySQL Enterprise Edition includes MySQL Server, a fully
integrated transaction-safe, ACID-compliant database with full commit,
rollback, crash-recovery, and row-level locking capabilities. In
addition, MySQL Enterprise Edition includes the following components
designed to provide monitoring and online backup, as well as improved
security and scalability:

The following sections briefly discuss each of these components and
indicate where to find more detailed information. To learn more about
commercial products, see http://www.mysql.com/products/.

   * *Note MySQL Enterprise Monitor: mysql-enterprise-monitor.

   * *Note MySQL Enterprise Backup: mysql-enterprise-backup.

   * *Note MySQL Enterprise Security: mysql-enterprise-security.

   * *Note MySQL Enterprise Audit: mysql-enterprise-audit.

   * *Note MySQL Enterprise Thread Pool: mysql-enterprise-thread-pool.


File: manual.info,  Node: mysql-enterprise-monitor,  Next: mysql-enterprise-backup,  Prev: mysql-enterprise,  Up: mysql-enterprise

24.1 MySQL Enterprise Monitor
=============================

MySQL Enterprise Monitor is an enterprise monitoring system for MySQL
that keeps an eye on your MySQL servers, notifies you of potential
issues and problems, and advises you how to fix the issues. MySQL
Enterprise Monitor can monitor all kinds of configurations, from a
single MySQL server that is important to your business, all the way up
to a huge farm of MySQL servers powering a busy web site.

The following discussion briefly summarizes the basic components that
make up the MySQL Enterprise Monitor product. For more information, see
the MySQL Enterprise Monitor manual, available at
`http://dev.mysql.com/doc/mysql-monitor/en/'.

MySQL Enterprise Monitor components can be installed in various
configurations depending on your database and network topology, to give
you the best combination of reliable and responsive monitoring data,
with minimal overhead on the database server machines. A typical MySQL
Enterprise Monitor installation consists of:

   * One or more MySQL servers to monitor. MySQL Enterprise Monitor can
     monitor both Community and Enterprise MySQL server releases.

   * A MySQL Enterprise Agent for each monitored MySQL server.

   * A single MySQL Enterprise Service Manager, which collates
     information from the agents and provides the user interface to the
     collected data.

MySQL Enterprise Monitor is designed to monitor one or more MySQL
servers. The monitoring information is collected by using an agent,
_MySQL Enterprise Agent_. The agent communicates with the MySQL server
that it monitors, collecting variables, status and health information,
and sending this information to the MySQL Enterprise Service Manager.
If you have multiple MySQL servers, then you have multiple MySQL
Enterprise Agent processes monitoring each MySQL server.

The information collected by the agent about each MySQL server you are
monitoring is sent to the _MySQL Enterprise Service Manager_. This
server collates all of the information from the agents. As it collates
the information sent by the agents, the MySQL Enterprise Service
Manager continually tests the collected data, comparing the status of
the server to reasonable values. When thresholds are reached, the
server can trigger an event (including an alarm and notification) to
highlight a potential issue, such as low memory, high CPU usage, or more
complex conditions such insufficient buffer sizes and status
information. We call each test, with its associated threshold value, a
_rule_.

These rules, and the alarms and notifications, are each known as a
_MySQL Enterprise Advisor_. Advisors form a critical part of the MySQL
Enterprise Service Manager, as they provide warning information and
troubleshooting advice about potential problems.

The MySQL Enterprise Service Manager includes a web server, and you
interact with it through any web browser. This interface, the MySQL
Enterprise Dashboard, displays all of the information collected by the
agents, and lets you view all of your servers and their current status
as a group or individually. You control and configure all aspects of the
service using the MySQL Enterprise Dashboard.

The information supplied by the MySQL Enterprise Agent processes also
includes statistical and query information, which you can view in the
form of graphs. For example, you can view aspects such as server load,
query numbers, or index usage information as a graph over time. The
graph lets you pinpoint problems or potential issues on your server,
and can help diagnose the impact from database or external problems
(such as external system or network failure) by examining the data from
a specific time interval.

The MySQL Enterprise Agent can also be configured to collect detailed
information about the queries executed on your server, including the
row counts and performance times for executing each query. You can
correlate the detailed query data with the graphical information to
identify which queries were executing when you experienced a
particularly high load, index or other issue. The query data is
supported by a system called Query Analyzer, and the data can be
presented in different ways depending on your needs.


File: manual.info,  Node: mysql-enterprise-backup,  Next: mysql-enterprise-security,  Prev: mysql-enterprise-monitor,  Up: mysql-enterprise

24.2 MySQL Enterprise Backup
============================

MySQL Enterprise Backup performs hot backup operations for MySQL
databases. The product is architected for efficient and reliable
backups of tables created by the InnoDB storage engine. For
completeness, it can also back up tables from MyISAM and other storage
engines.

The following discussion briefly summarizes MySQL Enterprise Backup.
For more information, see the MySQL Enterprise Backup manual, available
at `http://dev.mysql.com/doc/mysql-enterprise-backup/en/'.

Hot backups are performed while the database is running and
applications are reading and writing to it. This type of backup does
not block normal database operations, and it captures even changes that
occur while the backup is happening. For these reasons, hot backups are
desirable when your database `grows up' - when the data is large enough
that the backup takes significant time, and when your data is important
enough to your business that you must capture every last change,
without taking your application, web site, or web service offline.

MySQL Enterprise Backup does a hot backup of all tables that use the
InnoDB storage engine. For tables using MyISAM or other non-InnoDB
storage engines, it does a `warm' backup, where the database continues
to run, but those tables cannot be modified while being backed up. For
efficient backup operations, you can designate InnoDB as the default
storage engine for new tables, or convert existing tables to use the
InnoDB storage engine.


File: manual.info,  Node: mysql-enterprise-security,  Next: mysql-enterprise-audit,  Prev: mysql-enterprise-backup,  Up: mysql-enterprise

24.3 MySQL Enterprise Security
==============================

MySQL Enterprise Edition provides plugins that implement authentication
using external services:

   * MySQL Enterprise Edition includes an authentication plugin that
     enables MySQL Server to use PAM (Pluggable Authentication Modules)
     to authenticate MySQL users. PAM enables a system to use a
     standard interface to access various kinds of authentication
     methods, such as Unix passwords or an LDAP directory.

   * MySQL Enterprise Edition includes an authentication plugin that
     performs external authentication on Windows, enabling MySQL Server
     to use native Windows services to authenticate client connections.
     Users who have logged in to Windows can connect from MySQL client
     programs to the server based on the information in their
     environment without specifying an additional password.

For more information, see *Note pam-authentication-plugin::, and *Note
windows-authentication-plugin::.


File: manual.info,  Node: mysql-enterprise-audit,  Next: mysql-enterprise-thread-pool,  Prev: mysql-enterprise-security,  Up: mysql-enterprise

24.4 MySQL Enterprise Audit
===========================

MySQL Enterprise Edition includes MySQL Enterprise Audit, implemented
using a server plugin. MySQL Enterprise Audit uses the open MySQL Audit
API to enable standard, policy-based monitoring and logging of
connection and query activity executed on specific MySQL servers.
Designed to meet the Oracle audit specification, MySQL Enterprise Audit
provides an out of box, easy to use auditing and compliance solution
for applications that are governed by both internal and external
regulatory guidelines.

When installed, the audit plugin enables MySQL Server to produce a log
file containing an audit record of server activity. The log contents
include when clients connect and disconnect, and what actions they
perform while connected, such as which databases and tables they access.

For more information, see *Note audit-log-plugin::.


File: manual.info,  Node: mysql-enterprise-thread-pool,  Prev: mysql-enterprise-audit,  Up: mysql-enterprise

24.5 MySQL Enterprise Thread Pool
=================================

MySQL Enterprise Edition includes the MySQL Thread Pool, implemented
using a server plugin. The default thread-handling model in MySQL
Server executes statements using one thread per client connection. As
more clients connect to the server and execute statements, overall
performance degrades. In MySQL Enterprise Edition, a thread pool plugin
provides an alternative thread-handling model designed to reduce
overhead and improve performance. The plugin implements a thread pool
that increases server performance by efficiently managing statement
execution threads for large numbers of client connections.

For more information, see *Note thread-pool-plugin::.


File: manual.info,  Node: workbench,  Next: mysql-for-excel,  Prev: mysql-enterprise,  Up: Top

25 MySQL Workbench
******************

MySQL Workbench provides a graphical tool for working with MySQL Servers
and databases. MySQL Workbench fully supports MySQL Server versions 5.1
and above. It is also compatible with MySQL Server 5.0, but not every
feature of 5.0 may be supported. It does not support MySQL Server
versions 4.x.

The following discussion briefly describes MySQL Workbench capabilities.
For more information, see the MySQL Workbench manual, available at
`http://dev.mysql.com/doc/workbench/en/'.

MySQL Workbench provides three main areas of functionality:

   * *SQL Development*: Enables you to create and manage connections to
     database servers. As well as enabling you to configure connection
     parameters, MySQL Workbench provides the capability to execute SQL
     queries on the database connections using the built-in SQL Editor.
     This functionality replaces that previously provided by the Query
     Browser standalone application.

   * *Data Modeling*: Enables you to create models of your database
     schema graphically, reverse and forward engineer between a schema
     and a live database, and edit all aspects of your database using
     the comprehensive Table Editor. The Table Editor provides
     easy-to-use facilities for editing Tables, Columns, Indexes,
     Triggers, Partitioning, Options, Inserts and Privileges, Routines
     and Views.

   * *Server Administration*: Enables you to create and administer
     server instances. This functionality replaces that previously
     provided by the MySQL Administrator standalone application.

MySQL Workbench is available in two editions, the Community Edition and
the Standard Edition. The Community Edition is available free of
charge. The Standard Edition provides additional Enterprise features,
such as database documentation generation, at low cost.


File: manual.info,  Node: mysql-for-excel,  Next: licenses-third-party,  Prev: workbench,  Up: Top

26 MySQL for Excel
******************

* Menu:

* mysql-for-excel-install::      Installing and Configuring
* mysql-for-excel-edit::         Edit MySQL Data in Excel
* mysql-for-excel-import::       Import MySQL Data into Excel
* mysql-for-excel-append::       Append Excel Data into MySQL
* mysql-for-excel-export::       Export Excel Data into MySQL
* mysql-for-excel-faq::          MySQL for Excel FAQ

MySQL for Excel enables you to work with a MySQL database from within
Microsoft Excel. MySQL data can be imported into Excel, Excel data can
be exported into MySQL as a new table or appended to a current table,
and MySQL for Excel enables you to edit the MySQL data directly from
within Excel.

Visit the MySQL for Excel forum (http://forums.mysql.com/list.php?172)
for additional MySQL for Excel help and support.

For release notes detailing the changes in each release of MySQL for
Excel, see MySQL for Excel Release Notes
(http://dev.mysql.com/doc/relnotes/mysql-for-excel/en/).


File: manual.info,  Node: mysql-for-excel-install,  Next: mysql-for-excel-edit,  Prev: mysql-for-excel,  Up: mysql-for-excel

26.1 Installing and Configuring
===============================

MySQL for Excel is a product for Microsoft Windows, and it is installed
with MySQL Installer. And typically you will not be required to install
or configure additional tools to use MySQL for Excel.

*Note*:

To install, download and execute the MySQL Installer
(http://dev.mysql.com/downloads/installer/). Select the MySQL for Excel
product and then proceed with the installation. See the *Note MySQL
Installer manual: mysql-installer. for additional details.

* MySQL for Excel Requirements *

The MySQL Installer installation process will check if these
requirements are met, or notify you if further action is required
before proceeding with the installation.

   * .NET Framework 4.0 (Client or Full Profile).

   * Microsoft Office Excel 2007 or greater, for Microsoft Windows.

   * Visual Studio Tools for Office 4.0, and MySQL Installer may
     install this for you.

   * An available MySQL Server connection.

MySQL for Excel is loaded and executed by selecting the `Data' menu tab
in Excel, and then choosing the "MySQL for Excel" Database icon. This
opens a new Excel sidebar with the available MySQL for Excel options.
The navigation bar with the MySQL for Excel icon is shown in the
following screenshot:

FIGURE GOES HERE: The MySQL for Excel navigation bar


File: manual.info,  Node: mysql-for-excel-edit,  Next: mysql-for-excel-import,  Prev: mysql-for-excel-install,  Up: mysql-for-excel

26.2 Edit MySQL Data in Excel
=============================

MySQL for Excel enables you to load and edit MySQL data directly from
Microsoft Excel. Changes are immediately committed if the `Auto-Commit'
option is enabled, or done manually by pressing `Commit Changes'.

*Note*:

The `Edit MySQL Data' feature exists as of MySQL for Excel 1.1.0.

The example below uses the `category' table of the example `sakila'
database, but the screen will look the same for any table. Within MySQL
for Excel, `Open a MySQL Connection', click the `sakila' schema,
`Next', select the `category' table, click `Edit MySQL Data', then
choose `Import' to import the data into a new Microsoft Excel worksheet
for editing.

FIGURE GOES HERE: Editing table data with MySQL for Excel

The background color represents the status of each cell, and there are
four distinct colors that are used while editing table data:

*Background cell colors*

Color          Description
White          Default color for all cells. This is either the original
               data, or the data after `Refresh from DB' is clicked.
Blue           Cells that were committed with success.
Green          Cells that were modified but have not yet been committed.
Red            Cells that generated an error when a commit was
               attempted. An error dialog is also displayed while the
               commit is attempted.
Yellow         Cells that accept new data. Data entered here is inserted
               into the MySQL table.

In our example, the blue "Drama" field was changed and then committed
first, then the green "Gaming" field was changed but not committed, and
then `Auto-Commit' was enabled before changing the "9" to a "10" in
column 10, which generated an error because this commit would have
added a duplicate value as primary key.


File: manual.info,  Node: mysql-for-excel-import,  Next: mysql-for-excel-append,  Prev: mysql-for-excel-edit,  Up: mysql-for-excel

26.3 Import MySQL Data into Excel
=================================

Data can be imported from MySQL into a Microsoft Excel spreadsheet by
using the `Import MySQL Data' option after selecting either a table,
view, or procedure to import.

* Choosing columns to import *

By default, all columns are selected and will be imported.  Specific
columns may be selected (or unselected) using the standard Microsoft
Windows method of either `Control' + `Mouse click' to toggle the
selection of individual columns, or `Shift' + `Mouse click' to select a
range of columns.

The background color of a column shows the status of each column.  The
color white means that the column has been selected, and therefore it
will be imported. Conversely, a gray background means that the column
will not be imported.

Right-clicking anywhere in the preview grid opens a context-menu with
either a `Select None' or `Select All' option, depending on the current
status.

* Importing a table *

The dialog while importing a table includes the following options:

   * `Include Column Names as Headers': Enabled by default, this
     inserts the column names at the top of the Microsoft Excel
     spreadsheet as a "headers" row.

   * `Limit to ___ Rows and Start with Row ___': Disabled by default,
     this limits the range of imported data.  The `Limit to' option
     defaults to `1', and defines the number of rows to import. The
     `Start with Row' option defaults to `1' (the first row), and
     defines where the import begins. Each option has a maximum value
     of COUNT(rows) in the table.

Importing a table displays a dialog similar to the following:

FIGURE GOES HERE: Importing table data with MySQL for Excel

* Importing a view or procedure *

Importing a view or procedure displays a similar dialogue, but with the
following options:

   * `Include Column Names as Headers': Enabled by default, this will
     insert the column names at the top of the Excel spreadsheet as a
     "headers" row.

   * `Import': Because a procedure might return multiple result sets,
     the import options include:

        * `Selected Result Set': Imports the selected tab sheet. This
          is the default behavior.

        * `All Result Sets - Arranged Horizontally': Imports all result
          sets into the Excel Worksheet horizontally, and inserts one
          empty column between each result set.

        * `All Result Sets - Arranged Vertically': Imports all result
          sets into the Excel Worksheet vertically, and inserts one
          empty row between each result set.

For example, a dialogue like the following is displayed after importing
a procedure and pressing the `Call' button to invoke the stored
procedure:

FIGURE GOES HERE: Importing called stored procedure data with MySQL for
Excel


File: manual.info,  Node: mysql-for-excel-append,  Next: mysql-for-excel-export,  Prev: mysql-for-excel-import,  Up: mysql-for-excel

26.4 Append Excel Data into MySQL
=================================

Data from a Microsoft Excel spreadsheet can be appended to a MySQL
database table by using the `Append Excel MySQL Data to Table' option.

* Column mappings *

Mapping the Excel columns to the MySQL columns can be executed
automatically (default), manually, or by using a stored mapping
routine. An automatic mapping routine is the default, and can be can be
tweaked if every column cannot be matched automatically.  The following
screenshot shows two columns of Excel data, and the preview dialog
after choosing `Append Excel Data to Table':

FIGURE GOES HERE: Appending Excel data to MySQL (Automatic mapping)

* General mapping information *

It is common to tweak the column mappings. A few notes about the manual
mapping process:

   * Manual mapping is performed by dragging a column from the upper
     source grid (Excel spreadsheet) and dropping it into the lower
     target column MySQL table grid. Click anywhere within the column
     to initiate this dragging routine.

   * The color of the header field for each column defines the current
     mapping status of the column. The colors include:

        * Green: A source column is mapped to a target column.

        * Red: A target column is not mapped.

        * Gray: A source column is not mapped.

   * A source column may be mapped to multiple target columns, although
     this action generates a warning dialog.

   * Right-clicking a target column shows a context menu with options
     to either `Remove Column Mapping' for a single column, or to
     `Clear All Mappings' for all columns. Dragging a target column
     outside of the grid removes the mapping.

* Mapping methods *

The three mapping methods are described below:

   * `Automatic': The automatic mapping method attempts to match the
     Excel source column names with the MySQL target table column
     names. It is then possible to manually tweak the mapping
     afterwards.

     If the automatic process finds zero columns to match, then a
     simple 1 to 1 matching routine is attempted. Meaning, SourceColumn
     #1 to TargetColumn #1, SourceColumn #2 to TargetColumn #2, and so
     on.

   * `Manual': The source column names are manually dragged (matched)
     with the target column names.  Manual dragging can also be
     performed after the `Automatic' method is selected.

   * `Stored': Manual mapping styles may be saved using the `Store
     Mapping' button, which will also prompt for a name and then save
     it using a "NAME (dbname.tablename)" naming scheme. The saved
     mapping style will then be available alongside the `Automatic' and
     `Manual' options.

     Stored mappings may be deleted or renamed within the `Advanced
     Options' dialog.

* Advanced Options *

There are several advanced options that are configured and stored
between sessions for each Excel user. The dialog looks similar to:

FIGURE GOES HERE: Appending Excel data to MySQL (Advanced Options)

The advanced `Mapping Options':

   * `Perform an automatic mapping when dialog opens': Automatically
     attempt to map the target and source when the `Append Data' dialog
     is opened. This feature is enabled by default.

   * `Automatically store the column mapping for the given table':
     Stores each mapping routine after executing the `Append'
     operation. The mapping routine is saved using the "tablenameMapping
     (dbname.tablename)" format. This may also be performed manually
     using the `Store Mapping' button. It is enabled by default, and
     this feature was added in MySQL for Excel 1.1.0.

   * `Reload stored column mapping for the selected table
     automatically': If a stored mapping routine exists that matches
     all column names in the source grid with the target grid, then it
     is automatically be loaded. This is enabled by default, and this
     feature was added in MySQL for Excel 1.1.0.

The advanced `Field Data Options':

   * `Use the first' 100 (default) Excel data rows to preview and
     calculate data types. This determines the number of rows that the
     preview displays, and the values that affect the automatic mapping
     feature.

   * `Use formatted values': The data from Excel is treated as `Text',
     `Double', or `Date'. This is enabled by default. When disabled,
     data is never treated as a `Date' type, so for example, this means
     that a date would be represented as a number.

The `Stored Column Mappings' is a list of saved column mappings that
were saved with with the "Automatically store the column mapping for
the given table" feature, or manually with the `Store Mapping' option.


File: manual.info,  Node: mysql-for-excel-export,  Next: mysql-for-excel-faq,  Prev: mysql-for-excel-append,  Up: mysql-for-excel

26.5 Export Excel Data into MySQL
=================================

Data from a Microsoft Excel spreadsheet can be exported to a new MySQL
database table by using the `Export Excel Data to New Table' option.
Exporting data looks like so:

FIGURE GOES HERE: Exporting Excel data to MySQL

* Advanced Export options *

Several advanced options enables you to tweak the exported data.  The
advanced options dialog looks like so:

FIGURE GOES HERE: Exporting Excel data to MySQL (Advanced options)

   * `Column Datatype Options':

        * Use the first 100 (default) Excel data rows to preview and
          calculate data types: This determines the number of rows that
          the preview displays, and the values that affect the
          automatic mapping feature.

        * Analyze and try to detect correct datatype based on column
          field contents: Attempts to analyze the data and determine
          the data type for the column. The column type is defined as
          `VARCHAR' if it contains multiple types.

        * Add additional buffer to `VARCHAR' length (round up to 12,
          25, 45, 125, 255): When the data type is automatically
          detected and is set to `VARCHAR', then it calculates the
          maximum length for all rows within the column, and rounds up
          the maximum length to one of the defined lengths above.

          If disabled, then the `VARCHAR' length is set to the length
          of the longest entry in the Excel spreadsheet.

        * Automatically check the Index checkbox for Integer columns:
          If enabled (default), columns with an Integer data type will
          have the `Create Index' option enabled by default.

        * Automatically check the Allow Empty checkbox for columns
          without an index: If enabled (default), columns without the
          `Create Index' checkbox checked will automatically enable the
          `Allow Empty' configuration option.

   * `Field Data options':

        * Use formatted values: When enabled (default), the data from
          Excel is treated as `Text', `Double', or `Date'.  When
          disabled, data is never treated as a `Date' type, so for
          example this means that a date would be represented as a
          number.

   * `Other options':

        * Remove columns that contain no data, otherwise flag them as
          "Excluded": If enabled, columns without data in Excel are
          removed and not shown in the preview panel. If disabled
          (default), these columns will exist but have the `Exclude
          Column' option checked. This option was added in MySQL for
          Excel 1.1.0.


File: manual.info,  Node: mysql-for-excel-faq,  Prev: mysql-for-excel-export,  Up: mysql-for-excel

26.6 MySQL for Excel FAQ
========================

Frequently Asked Questions, with Answers.

*Questions*
   * 27.6.1: I installed the MySQL for Excel plugin, but can't find it
     in Microsoft Excel. How do I start it?

   * 27.6.2: I click on `Edit Data' and after importing the table data
     into Excel, I can't sort or move columns around. How can I do that?

   * 27.6.3: When editing a MySQL table's data, the Excel worksheet
     where the data is dumped is protected. How can unprotect it?

   * 27.6.4: The MySQL Workbench connections that use SSH tunneling
     appear grayed out (disabled) in MySQL for Excel. How can I use a
     SSH connection?

*Questions and Answers* *27.6.1: ** I installed the MySQL for Excel
plugin, but can't find it in Microsoft Excel. How do I start it?  *

The MySQL for Excel plugin is automatically added to Microsoft Excel's
data menu when it is installed. Look for the MySQL for Excel icon, by
default it will be listed on the right side of the main menu.

If it's not there, then you might have to reinstall the plugin. But
before doing so, first check if it's listed under "Add/Remove Programs"
in Microsoft Windows. If not, then it has not been installed. Next,
check the Excel Add-Ins list. For Office 2007 this is found by clicking
the Office logo in Excel (top left corner), click `Excel Options', then
select `Add-Ins'. Is MySQL for Excel listed as a COM Add-in? If so,
then consider filing a bug report (bugs.mysql.com), or attempt to
reinstall the plugin.

*27.6.2: ** I click on `Edit Data' and after importing the table data
into Excel, I can't sort or move columns around. How can I do that?  *

In order to maintain the mapping of rows and columns in the Excel
Worksheet against the rows and columns in the MySQL table, no
alteration is permitted on the worksheet (i.e.  sorting, deleting rows,
deleting columns). If you need to alter the data there you can do that
by right-clicking the `Edit Data' window and selecting `Exit Edit Mode'.

*27.6.3: ** When editing a MySQL table's data, the Excel worksheet where
the data is dumped is protected. How can unprotect it?  *

The Excel worksheet is protected to not allow alterations to the order
of rows and columns. The password used for the protection is a GUID
auto-generated at runtime so that the protection is not violated in any
way. If you wish to unprotect the worksheet to manipulate your data,
you can do that by right-clicking the `Edit Data' window and selecting
`Exit Edit Mode'.

*27.6.4: ** The MySQL Workbench connections that use SSH tunneling
appear grayed out (disabled) in MySQL for Excel. How can I use a SSH
connection?  *

This is a known limitation of MySQL for Excel. MySQL for Excel uses
MySQL Connector/NET to connect and communicate with MySQL databases.
Connector/NET does not have SSH support, so the behavior will change if
Connector/NET supports it in the future.


File: manual.info,  Node: licenses-third-party,  Next: faqs,  Prev: mysql-for-excel,  Up: Top

Appendix A Licenses for Third-Party Components
**********************************************

* Menu:

* license-ant-contrib::          Ant-Contrib License
* license-antlr-3::              ANTLR 3 License
* license-antlr-3-3::            ANTLR 3.3 License
* license-boost::                Boost Library License
* license-bouncy-castle-1-7::    Bouncy Castle 1.7 License
* license-c3p0-0-91::            c3p0 JDBC Library License
* license-django-151::           Django 1.5.1 License
* license-dtoa::                 `dtoa.c' License
* license-libedit::              Editline Library (`libedit') License
* license-findgtest-cmake::      `FindGTest.cmake' License
* license-dbug::                 Fred Fish's Dbug Library License
* license-getarg::               `getarg' License
* license-glib-proxy::           GLib License (for MySQL Proxy)
* license-gnu-gpl-2-0::          GNU General Public License Version 2.0, June 1991
* license-gnu-lgpl-2-1::         GNU Lesser General Public License Version 2.1, February 1999
* license-gnu-libtool::          GNU Libtool License
* license-gnu-readline::         GNU Readline License
* license-google-io-rate-patch::  Google Controlling Master Thread I/O Rate Patch License
* license-google-tcmalloc::      Google Perftools (TCMalloc utility) License
* license-google-smp-patch::     Google SMP Patch License
* license-jboss-common-jdbc-wrapper::  jboss-common-jdbc-wrapper.jar License
* license-lib-sql::              `lib_sql.cc' License
* license-libaio::               Libaio License
* license-libevent::             `libevent' License
* license-libiconv-proxy::       Libiconv License
* license-libintl::              `libintl' License
* license-linux-pam::            Linux-PAM License
* license-lpeg::                 `LPeg' Library License
* license-lua::                  Lua (liblua) License
* license-luafilesystem::        `LuaFileSystem' Library License
* license-md5::                  md5 (Message-Digest Algorithm 5) License
* license-memcached::            `memcached' License
* license-nt-servc::             nt_servc (Windows NT Service class library) License
* license-openpam::              OpenPAM License
* license-openssl-1-0::          OpenSSL v1.0 License
* license-paramiko::             Paramiko License
* license-pcre::                 PCRE License
* license-percona-io-threads-patch::  Percona Multiple I/O Threads Patch License
* license-python::               Python License
* license-redhat-spec-file::     Red HAT RPM Spec File License
* license-regex::                RegEX-Spencer Library License
* license-us-secure-hash::       RFC 3174 - US Secure Hash Algorithm 1 (SHA1) License
* license-libstring::            Richard A. O'Keefe String Library License
* license-sha1-in-c::            SHA-1 in C License
* license-slf4j::                Simple Logging Facade for Java (SLF4J) License
* license-zlib::                 `zlib' License
* license-zlib-net::             ZLIB.NET License

The following is a list of the libraries we have included with the
MySQL Server source and components used to test MySQL. We are thankful
to all individuals that have created these. Some of the components
require that their licensing terms be included in the documentation of
products that include them. Cross references to these licensing terms
are given with the applicable items in the list.

   * GroupLens Research Project

     The MySQL Quality Assurance team would like to acknowledge the use
     of the MovieLens Data Sets (10 million ratings and 100,000 tags
     for 10681 movies by 71567 users) to help test MySQL products and
     to thank the GroupLens Research Project at the University of
     Minnesota for making the data sets available.

*MySQL 5.5*
   * *Note license-dtoa::

   * *Note license-libedit::

   * *Note license-findgtest-cmake::

   * *Note license-dbug::

   * *Note license-getarg::

   * *Note license-gnu-gpl-2-0::

   * *Note license-gnu-lgpl-2-1::

   * *Note license-gnu-libtool::

   * *Note license-gnu-readline::

   * *Note license-google-io-rate-patch::

   * *Note license-google-tcmalloc::

   * *Note license-google-smp-patch::

   * *Note license-lib-sql::

   * *Note license-libaio::

   * *Note license-libevent::

   * *Note license-linux-pam::

   * *Note license-md5::

   * *Note license-nt-servc::

   * *Note license-openpam::

   * *Note license-percona-io-threads-patch::

   * *Note license-redhat-spec-file::

   * *Note license-regex::

   * *Note license-us-secure-hash::

   * *Note license-libstring::

   * *Note license-sha1-in-c::

   * *Note license-zlib::

*MySQL Cluster 7.2*
   * *Note license-antlr-3::

   * *Note license-dtoa::

   * *Note license-libedit::

   * *Note license-findgtest-cmake::

   * *Note license-dbug::

   * *Note license-getarg::

   * *Note license-gnu-gpl-2-0::

   * *Note license-gnu-lgpl-2-1::

   * *Note license-gnu-libtool::

   * *Note license-gnu-readline::

   * *Note license-google-io-rate-patch::

   * *Note license-google-tcmalloc::

   * *Note license-google-smp-patch::

   * *Note license-lib-sql::

   * *Note license-libevent::

   * *Note license-linux-pam::

   * *Note license-md5::

   * *Note license-memcached::

   * *Note license-nt-servc::

   * *Note license-openpam::

   * *Note license-paramiko::

   * *Note license-percona-io-threads-patch::

   * *Note license-python::

   * *Note license-regex::

   * *Note license-libstring::

   * *Note license-sha1-in-c::

   * *Note license-zlib::

*MySQL Connector/C 6.0*
   * *Note license-dbug::

   * *Note license-regex::

   * *Note license-us-secure-hash::

   * *Note license-zlib::

*MySQL Connector/C 6.1*
   * *Note license-dtoa::

   * *Note license-dbug::

   * *Note license-gnu-gpl-2-0::

   * *Note license-md5::

   * *Note license-regex::

   * *Note license-libstring::

   * *Note license-sha1-in-c::

   * *Note license-zlib::

*MySQL Connector/C++*
   * *Note license-boost::

   * *Note license-openssl-1-0::

*MySQL Connector/J*
   * *Note license-ant-contrib::

   * *Note license-c3p0-0-91::

   * *Note license-gnu-lgpl-2-1::

   * *Note license-jboss-common-jdbc-wrapper::

   * *Note license-slf4j::

*MySQL Connector/Net 1.0-6.4*
   * *Note license-antlr-3-3::

   * *Note license-us-secure-hash::

   * *Note license-zlib::

   * *Note license-zlib-net::

*MySQL Connector/Net 6.5-6.6*
   * *Note license-antlr-3-3::

   * *Note license-zlib::

   * *Note license-zlib-net::

*MySQL Connector/Net 6.7*
   * *Note license-antlr-3-3::

   * *Note license-bouncy-castle-1-7::

   * *Note license-zlib::

   * *Note license-zlib-net::

*MySQL Connector/ODBC*
   * *Note license-gnu-libtool::

   * *Note license-openssl-1-0::

*MySQL Connector/Python 1.1*
   * *Note license-django-151::

*MySQL Proxy*
   * *Note license-glib-proxy::

   * *Note license-gnu-lgpl-2-1::

   * *Note license-libevent::

   * *Note license-libiconv-proxy::

   * *Note license-libintl::

   * *Note license-lpeg::

   * *Note license-lua::

   * *Note license-luafilesystem::

   * *Note license-pcre::


File: manual.info,  Node: license-ant-contrib,  Next: license-antlr-3,  Prev: licenses-third-party,  Up: licenses-third-party

A.1 Ant-Contrib License
=======================

The following software may be included in this product up to version
5.1.26: Ant-Contrib

     Ant-Contrib
     Copyright (c) 2001-2003 Ant-Contrib project. All rights reserved.
     Licensed under the Apache 1.1 License Agreement, a copy of which is reproduced below.

     The Apache Software License, Version 1.1

     Copyright (c) 2001-2003 Ant-Contrib project.  All rights reserved.

      Redistribution and use in source and binary forms, with or without
      modification, are permitted provided that the following conditions
      are met:

      1. Redistributions of source code must retain the above copyright
         notice, this list of conditions and the following disclaimer.

      2. Redistributions in binary form must reproduce the above copyright
         notice, this list of conditions and the following disclaimer in
         the documentation and/or other materials provided with the
         distribution.

      3. The end-user documentation included with the redistribution, if
         any, must include the following acknowlegement:
            "This product includes software developed by the
             Ant-Contrib project (http://sourceforge.net/projects/ant-contrib)."
         Alternately, this acknowlegement may appear in the software itself,
         if and wherever such third-party acknowlegements normally appear.

      4. The name Ant-Contrib must not be used to endorse or promote
         products derived from this software without prior written
         permission. For written permission, please contact
         ant-contrib-developers@lists.sourceforge.net.

      5. Products derived from this software may not be called "Ant-Contrib"
         nor may "Ant-Contrib" appear in their names without prior written
         permission of the Ant-Contrib project.

      THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
      WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
      OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
      DISCLAIMED.  IN NO EVENT SHALL THE ANT-CONTRIB PROJECT OR ITS
      CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
      SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
      LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
      USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
      ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
      OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
      OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
      SUCH DAMAGE.


File: manual.info,  Node: license-antlr-3,  Next: license-antlr-3-3,  Prev: license-ant-contrib,  Up: licenses-third-party

A.2 ANTLR 3 License
===================

     The following software may be included in this product:

     ANTLR 3

     ANTLR 3 License
     [The BSD License]
     Copyright (c) 2003-2007, Terence Parr
     All rights reserved.

     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions
     are met:

     * Redistributions of source code must retain the above copyright
       notice, this list of conditions and the following disclaimer.
     * Redistributions in binary form must reproduce the above copyright
       notice, this list of conditions and the following disclaimer in
       the documentation and/or other materials provided with the
       distribution.
     * Neither the name of the author nor the names of its contributors
       may be used to endorse or promote products derived from this
       software without specific prior written permission.

     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
     COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
     INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
     BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
     ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     POSSIBILITY OF SUCH DAMAGE.


File: manual.info,  Node: license-antlr-3-3,  Next: license-boost,  Prev: license-antlr-3,  Up: licenses-third-party

A.3 ANTLR 3.3 License
=====================

     The following software may be included in this product:

     ANTLR 3.3

     ANTLR 3.3 License
     Copyright (c) 2010 Terence Parr
     All rights reserved.
     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions are met:

     Redistributions of source code must retain the above copyright notice, this
     list of conditions and the following disclaimer.
     Redistributions in binary form must reproduce the above copyright notice,
     this list of conditions and the following disclaimer in the documentation
     and/or other materials provided with the distribution.
     Neither the name of the author nor the names of its contributors may be used
     to endorse or promote products derived from this software without specific
     prior written permission.
     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
     AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
     LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     POSSIBILITY OF SUCH DAMAGE.


File: manual.info,  Node: license-boost,  Next: license-bouncy-castle-1-7,  Prev: license-antlr-3-3,  Up: licenses-third-party

A.4 Boost Library License
=========================

The following software may be included in this product:

*Boost C++ Libraries*

Use of any of this software is governed by the terms of the license
below:

     Boost Software License - Version 1.0 - August 17th, 2003

     Permission is hereby granted, free of charge, to any person or
     organization obtaining a copy of the software and accompanying
     documentation covered by this license (the "Software") to use,
     reproduce, display, distribute, execute, and transmit the Software,
     and to prepare derivative works of the Software, and to permit
     third-parties to whom the Software is furnished to do so, all
     subject to the following:

     The copyright notices in the Software and this entire statement,
     including the above license grant, this restriction and the
     following disclaimer, must be included in all copies of the
     Software, in whole or in part, and all derivative works of the
     Software, unless such copies or derivative works are solely in the
     form of machine-executable object code generated by a source
     language processor.

     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
     MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND
     NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR ANYONE
     DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR OTHER
     LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
     OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
     IN THE SOFTWARE.


File: manual.info,  Node: license-bouncy-castle-1-7,  Next: license-c3p0-0-91,  Prev: license-boost,  Up: licenses-third-party

A.5 Bouncy Castle 1.7 License
=============================

The following software may be included in this product:

Bouncy Castle 1.7

     Copyright (c) 2000 - 2011 The Legion Of The Bouncy Castle
     (http://www.bouncycastle.org)

     Permission is hereby granted, free of charge, to any person obtaining a copy
     of this software and associated documentation files (the "Software"), to deal
     in the Software without restriction, including without limitation the rights
     to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
     copies of the Software, and to permit persons to whom the Software is
     furnished to do so, subject to the following conditions:

     The above copyright notice and this permission notice shall be included in
     all copies or substantial portions of the Software.

     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
     IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
     FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
     AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
     LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
     OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
     SOFTWARE.


File: manual.info,  Node: license-c3p0-0-91,  Next: license-django-151,  Prev: license-bouncy-castle-1-7,  Up: licenses-third-party

A.6 c3p0 JDBC Library License
=============================

You are receiving a copy of `c3p0-0.9.1-pre6.jar' in both source and
object code in the following `/src/lib/c3p0-0.9.1-pre6.jar'. The terms
of the Oracle license do NOT apply to `c3p0-0.9.1-pre6.jar'; it is
licensed under the following license, separately from the Oracle
programs you receive.  If you do not wish to install this library, you
may remove the file `/src/lib/c3p0-0.9.1-pre6.jar', but the Oracle
program might not operate properly or at all without the library.

This component is licensed under *Note license-gnu-lgpl-2-1::.


File: manual.info,  Node: license-django-151,  Next: license-dtoa,  Prev: license-c3p0-0-91,  Up: licenses-third-party

A.7 Django 1.5.1 License
========================

The following software may be included in this product:

     Copyright (c) Django Software Foundation and individual contributors.
     All rights reserved.

     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions
     are met:

         1. Redistributions of source code must retain the above copyright
            notice, this list of conditions and the following disclaimer.

         2. Redistributions in binary form must reproduce the above copyright
            notice, this list of conditions and the following disclaimer in the
            documentation and/or other materials provided with the distribution.

         3. Neither the name of Django nor the names of its contributors may be
            used to endorse or promote products derived from this software without
            specific prior written permission.

     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
     COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
     INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
     BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
     ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     POSSIBILITY OF SUCH DAMAGE.


File: manual.info,  Node: license-dtoa,  Next: license-libedit,  Prev: license-django-151,  Up: licenses-third-party

A.8 `dtoa.c' License
====================

The following software may be included in this product:

`dtoa.c'

     The author of this software is David M. Gay.

     Copyright (c) 1991, 2000, 2001 by Lucent Technologies.

     Permission to use, copy, modify, and distribute this software for
     any purpose without fee is hereby granted, provided that this entire
     notice is included in all copies of any software which is or includes
     a copy or modification of this software and in all copies of the
     supporting documentation for such software.

     THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR
     IMPLIED WARRANTY. IN PARTICULAR, NEITHER THE AUTHOR NOR LUCENT
     MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE
     MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR
     PURPOSE.


File: manual.info,  Node: license-libedit,  Next: license-findgtest-cmake,  Prev: license-dtoa,  Up: licenses-third-party

A.9 Editline Library (`libedit') License
========================================

The following software may be included in this product:

Editline Library (libedit)

Some files are:

     Copyright (c) 1992, 1993
     The Regents of the University of California. All rights reserved.

     This code is derived from software contributed to
     Berkeley by Christos Zoulas of Cornell University.

     Redistribution and use in source and binary forms,
     with or without modification, are permitted provided
     that the following conditions are met:

     1. Redistributions of source code must retain the
       above copyright notice, this list of conditions
       and the following disclaimer.
     2. Redistributions in binary form must reproduce the
       above copyright notice, this list of conditions and
       the following disclaimer in the documentation and/or
       other materials provided with the distribution.
     3. Neither the name of the University nor the names of
       its contributors may be used to endorse or promote
       products derived from this software without specific
       prior written permission.

     THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS
     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
     BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
     AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
     EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY
     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
     PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
     AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
     IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
     OF THE POSSIBILITY OF SUCH DAMAGE.

Some files are:

     Copyright (c) 2001 The NetBSD Foundation, Inc.
     All rights reserved.

     This code is derived from software contributed to The NetBSD Foundation

     by Anthony Mallet.

     Redistribution and use in source and binary forms,
     with or without modification, are permitted provided
     that the following conditions are met:

     1. Redistributions of source code must retain the
        above copyright notice, this list of conditions
        and the following disclaimer.
     2. Redistributions in binary form must reproduce the
         above copyright notice, this list of conditions and the
         following disclaimer in the documentation and/or
         other materials provided with the distribution.

     THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC.
     AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
     WARRANTIES, INCLUDING, BUT NOT LIMITED  TO, THE IMPLIED
     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
     PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL
     THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY
     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
     PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
     USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
     OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
     DAMAGE.

Some files are:

     Copyright (c) 1997 The NetBSD Foundation, Inc.
     All rights reserved.

     This code is derived from software contributed to The NetBSD Foundation

     by Jaromir Dolecek.

     Redistribution and use in source and binary forms,
     with or without modification, are permitted provided
     that the following conditions are met:

     1. Redistributions of source code must retain the
        above copyright notice, this list of conditions
        and the following disclaimer.
     2. Redistributions in binary form must reproduce
         the above copyright notice, this list of conditions
         and the following disclaimer in the documentation
         and/or other materials provided with the distribution.

     THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC.
     AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
     WARRANTIES, INCLUDING, BUT NOT LIMITED  TO, THE IMPLIED
     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
     PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL
     THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY
     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
     PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
     USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
     OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
     DAMAGE.

Some files are:

     Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com>

     Permission to use, copy, modify, and distribute this
     software for any purpose with or without fee is hereby
     granted, provided that the above copyright notice and
     this permission notice appear in all copies.

     THE SOFTWARE IS PROVIDED "AS IS" AND TODD C. MILLER
     DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE
     INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
     AND FITNESS. IN NO EVENT SHALL TODD C. MILLER BE LIABLE
     FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
     DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
     LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
     OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
     ARISING OUT OF OR IN CONNECTION WITH THE USE OR
     PERFORMANCE OF THIS SOFTWARE.


File: manual.info,  Node: license-findgtest-cmake,  Next: license-dbug,  Prev: license-libedit,  Up: licenses-third-party

A.10 `FindGTest.cmake' License
==============================

The following software may be included in this product:

     FindGTest.cmake helper script (part of CMake)

     Copyright 2009 Kitware, Inc.
     Copyright 2009 Philip Lowman
     Copyright 2009 Daniel Blezek

     Distributed under the OSI-approved BSD License (the "License");
     see accompanying file Copyright.txt for details.

     This software is distributed WITHOUT ANY WARRANTY; without even the
     implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
     See the License for more information.
     ==========================================================================
     (To distributed this file outside of CMake, substitute the full
      License text for the above reference.)

     Thanks to Daniel Blezek  for the GTEST_ADD_TESTS code

     Text of Copyright.txt mentioned above:

     CMake - Cross Platform Makefile Generator
     Copyright 2000-2009 Kitware, Inc., Insight Software Consortium
     All rights reserved.

     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions
     are met:

     * Redistributions of source code must retain the above copyright
       notice, this list of conditions and the following disclaimer.

     * Redistributions in binary form must reproduce the above copyright
       notice, this list of conditions and the following disclaimer in the
       documentation and/or other materials provided with the distribution.

     * Neither the names of Kitware, Inc., the Insight Software Consortium,
       nor the names of their contributors may be used to endorse or promote
       products derived from this software without specific prior written
       permission.

     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
     A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
     HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
     LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
     OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.


File: manual.info,  Node: license-dbug,  Next: license-getarg,  Prev: license-findgtest-cmake,  Up: licenses-third-party

A.11 Fred Fish's Dbug Library License
=====================================

The following software may be included in this product:

Fred Fish's Dbug Library

                                     N O T I C E

                        Copyright Abandoned, 1987, Fred Fish

          This previously copyrighted work has been placed into the  public

          domain  by  the  author  and  may be freely used for any purpose,

          private or commercial.

          Because of the number of inquiries I was receiving about the  use

          of this product in commercially developed works I have decided to

          simply make it public domain to further its unrestricted use.   I

          specifically  would  be  most happy to see this material become a

          part of the standard Unix distributions by AT&T and the  Berkeley

          Computer  Science  Research Group, and a standard part of the GNU

          system from the Free Software Foundation.

          I would appreciate it, as a courtesy, if this notice is  left  in

          all copies and derivative works.  Thank you.

          The author makes no warranty of any kind  with  respect  to  this

          product  and  explicitly disclaims any implied warranties of mer-

          chantability or fitness for any particular purpose.

     The dbug_analyze.c file is subject to the following notice:

          Copyright June 1987, Binayak Banerjee
          All rights reserved.

          This program may be freely distributed under the same terms and
          conditions as Fred Fish's Dbug package.


File: manual.info,  Node: license-getarg,  Next: license-glib-proxy,  Prev: license-dbug,  Up: licenses-third-party

A.12 `getarg' License
=====================

The following software may be included in this product:

`getarg' Function (`getarg.h', `getarg.c' files)

     Copyright (c) 1997 - 2000 Kungliga Tekniska Ho"gskolan
     (Royal Institute of Technology, Stockholm, Sweden).
     All rights reserved.

     Redistribution and use in source and binary forms, with
     or without modification, are permitted provided that the
     following conditions are met:

     1. Redistributions of source code must retain the above
        copyright notice, this list of conditions and the
        following disclaimer.
     2. Redistributions in binary form must reproduce the above
        copyright notice, this list of conditions and the following
        disclaimer in the documentation and/or other materials
        provided with the distribution.
     3. Neither the name of the Institute nor the names of its
        contributors may be used to endorse or promote products
        derived from this software without specific prior written
        permission.

     THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS
     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
     BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
     AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
     EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY
     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
     GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
     WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
     NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
     DAMAGE.


File: manual.info,  Node: license-glib-proxy,  Next: license-gnu-gpl-2-0,  Prev: license-getarg,  Up: licenses-third-party

A.13 GLib License (for MySQL Proxy)
===================================

The following software may be included in this product:


     GLib

     You are receiving a copy of the GLib library in both source
     and object code in the following [proxy install dir]/lib/ and
     [proxy install dir]/licenses/lgpl folders. The terms of the
     Oracle license do NOT apply to the GLib library; it is licensed
     under the following license, separately from the Oracle programs
     you receive. If you do not wish to install this library, you may
     create an "exclude" file and run tar with the X option, as in
     the following example, but the Oracle program might not operate
     properly or at all without the library:
       tar -xvfX <package-tar-file> <exclude-file>
     where the exclude-file contains, e.g.:
       <package-name>/lib/libglib-2.0.so.0.1600.6
       <package-name>/lib/libglib-2.0.so.0
       ...

     Example:
     tar -xvfX mysql-proxy-0.8.1-solaris10-x86-64bit.tar.gz Exclude

     Exclude File:
     mysql-proxy-0.8.1-solaris10-x86-64bit/lib/libglib-2.0.so
     mysql-proxy-0.8.1-solaris10-x86-64bit/lib/libglib-2.0.so.0
     mysql-proxy-0.8.1-solaris10-x86-64bit/lib/libglib-2.0.so.0.1600.6
     mysql-proxy-0.8.1-solaris10-x86-64bit/lib/libgmodule-2.0.so
     mysql-proxy-0.8.1-solaris10-x86-64bit/lib/libgmodule-2.0.so.0
     mysql-proxy-0.8.1-solaris10-x86-64bit/lib/libgmodule-2.0.so.0.1600.6
     mysql-proxy-0.8.1-solaris10-x86-64bit/lib/libgthread-2.0.so
     mysql-proxy-0.8.1-solaris10-x86-64bit/lib/libgthread-2.0.so.0
     mysql-proxy-0.8.1-solaris10-x86-64bit/lib/libgthread-2.0.so.0.1600.6
     mysql-proxy-0.8.1-solaris10-x86-64bit/licenses/lgpl/glib-2.16.6.tar.gz

This component is licensed under *Note license-gnu-lgpl-2-1::.


File: manual.info,  Node: license-gnu-gpl-2-0,  Next: license-gnu-lgpl-2-1,  Prev: license-glib-proxy,  Up: licenses-third-party

A.14 GNU General Public License Version 2.0, June 1991
======================================================

     The following applies to all products licensed under the GNU General
     Public License, Version 2.0: You may not use the identified files
     except in compliance with the GNU General Public License, Version
     2.0 (the "License.") You may obtain a copy of the License at
     http://www.gnu.org/licenses/gpl-2.0.txt. A copy of the license is
     also reproduced below. Unless required by applicable law or agreed
     to in writing, software distributed under the License is distributed
     on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
     either express or implied. See the License for the specific language
     governing permissions and limitations under the License.

     GNU GENERAL PUBLIC LICENSE
     Version 2, June 1991

     Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
     51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
     Everyone is permitted to copy and distribute verbatim
     copies of this license document, but changing it is not
     allowed.

                          Preamble

       The licenses for most software are designed to take away your
     freedom to share and change it.  By contrast, the GNU General Public
     License is intended to guarantee your freedom to share and change free
     software--to make sure the software is free for all its users.  This
     General Public License applies to most of the Free Software
     Foundation's software and to any other program whose authors commit to
     using it.  (Some other Free Software Foundation software is covered by
     the GNU Lesser General Public License instead.)  You can apply it to
     your programs, too.

       When we speak of free software, we are referring to freedom, not
     price.  Our General Public Licenses are designed to make sure that you
     have the freedom to distribute copies of free software (and charge for
     this service if you wish), that you receive source code or can get it
     if you want it, that you can change the software or use pieces of it
     in new free programs; and that you know you can do these things.

       To protect your rights, we need to make restrictions that forbid
     anyone to deny you these rights or to ask you to surrender the rights.
     These restrictions translate to certain responsibilities for you if you
     distribute copies of the software, or if you modify it.

       For example, if you distribute copies of such a program, whether
     gratis or for a fee, you must give the recipients all the rights that
     you have.  You must make sure that they, too, receive or can get the
     source code.  And you must show them these terms so they know their
     rights.

       We protect your rights with two steps: (1) copyright the software,
     and (2) offer you this license which gives you legal permission to
     copy, distribute and/or modify the software.

       Also, for each author's protection and ours, we want to make certain
     that everyone understands that there is no warranty for this free
     software.  If the software is modified by someone else and passed on,
     we want its recipients to know that what they have is not the original,
     so that any problems introduced by others will not reflect on the
     original authors' reputations.

       Finally, any free program is threatened constantly by software
     patents.  We wish to avoid the danger that redistributors of a free
     program will individually obtain patent licenses, in effect making the
     program proprietary.  To prevent this, we have made it clear that any
     patent must be licensed for everyone's free use or not licensed at all.

       The precise terms and conditions for copying, distribution and
     modification follow.

                         GNU GENERAL PUBLIC LICENSE
        TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

       0. This License applies to any program or other work which contains
     a notice placed by the copyright holder saying it may be distributed
     under the terms of this General Public License.  The "Program", below,
     refers to any such program or work, and a "work based on the Program"
     means either the Program or any derivative work under copyright law:
     that is to say, a work containing the Program or a portion of it,
     either verbatim or with modifications and/or translated into another
     language.  (Hereinafter, translation is included without limitation in
     the term "modification".)  Each licensee is addressed as "you".

     Activities other than copying, distribution and modification are not
     covered by this License; they are outside its scope.  The act of
     running the Program is not restricted, and the output from the Program
     is covered only if its contents constitute a work based on the
     Program (independent of having been made by running the Program).
     Whether that is true depends on what the Program does.

       1. You may copy and distribute verbatim copies of the Program's
     source code as you receive it, in any medium, provided that you
     conspicuously and appropriately publish on each copy an appropriate
     copyright notice and disclaimer of warranty; keep intact all the
     notices that refer to this License and to the absence of any warranty;
     and give any other recipients of the Program a copy of this License
     along with the Program.

     You may charge a fee for the physical act of transferring a copy, and
     you may at your option offer warranty protection in exchange for a fee.

       2. You may modify your copy or copies of the Program or any portion
     of it, thus forming a work based on the Program, and copy and
     distribute such modifications or work under the terms of Section 1
     above, provided that you also meet all of these conditions:

         a) You must cause the modified files to carry prominent notices
         stating that you changed the files and the date of any change.

         b) You must cause any work that you distribute or publish, that in
         whole or in part contains or is derived from the Program or any
         part thereof, to be licensed as a whole at no charge to all third
         parties under the terms of this License.

         c) If the modified program normally reads commands interactively
         when run, you must cause it, when started running for such
         interactive use in the most ordinary way, to print or display an
         announcement including an appropriate copyright notice and a
         notice that there is no warranty (or else, saying that you provide
         a warranty) and that users may redistribute the program under
         these conditions, and telling the user how to view a copy of this
         License.  (Exception: if the Program itself is interactive but
         does not normally print such an announcement, your work based on
         the Program is not required to print an announcement.)

     These requirements apply to the modified work as a whole.  If
     identifiable sections of that work are not derived from the Program,
     and can be reasonably considered independent and separate works in
     themselves, then this License, and its terms, do not apply to those
     sections when you distribute them as separate works.  But when you
     distribute the same sections as part of a whole which is a work based
     on the Program, the distribution of the whole must be on the terms of
     this License, whose permissions for other licensees extend to the
     entire whole, and thus to each and every part regardless of who wrote it.

     Thus, it is not the intent of this section to claim rights or contest
     your rights to work written entirely by you; rather, the intent is to
     exercise the right to control the distribution of derivative or
     collective works based on the Program.

     In addition, mere aggregation of another work not based on the Program
     with the Program (or with a work based on the Program) on a volume of
     a storage or distribution medium does not bring the other work under
     the scope of this License.

       3. You may copy and distribute the Program (or a work based on it,
     under Section 2) in object code or executable form under the terms of
     Sections 1 and 2 above provided that you also do one of the following:

         a) Accompany it with the complete corresponding machine-readable
         source code, which must be distributed under the terms of Sections
         1 and 2 above on a medium customarily used for software
         interchange; or,

         b) Accompany it with a written offer, valid for at least three
         years, to give any third party, for a charge no more than your
         cost of physically performing source distribution, a complete
         machine-readable copy of the corresponding source code, to be
         distributed under the terms of Sections 1 and 2 above on a medium
         customarily used for software interchange; or,

         c) Accompany it with the information you received as to the offer
         to distribute corresponding source code.  (This alternative is
         allowed only for noncommercial distribution and only if you
         received the program in object code or executable form with such
         an offer, in accord with Subsection b above.)

     The source code for a work means the preferred form of the work for
     making modifications to it.  For an executable work, complete source
     code means all the source code for all modules it contains, plus any
     associated interface definition files, plus the scripts used to
     control compilation and installation of the executable.  However, as
     a special exception, the source code distributed need not include
     anything that is normally distributed (in either source or binary
     form) with the major components (compiler, kernel, and so on) of the
     operating system on which the executable runs, unless that component
     itself accompanies the executable.

     If distribution of executable or object code is made by offering
     access to copy from a designated place, then offering equivalent
     access to copy the source code from the same place counts as
     distribution of the source code, even though third parties are not
     compelled to copy the source along with the object code.

       4. You may not copy, modify, sublicense, or distribute the Program
     except as expressly provided under this License.  Any attempt
     otherwise to copy, modify, sublicense or distribute the Program is
     void, and will automatically terminate your rights under this License.
     However, parties who have received copies, or rights, from you under
     this License will not have their licenses terminated so long as such
     parties remain in full compliance.

       5. You are not required to accept this License, since you have not
     signed it.  However, nothing else grants you permission to modify or
     distribute the Program or its derivative works.  These actions are
     prohibited by law if you do not accept this License.  Therefore, by
     modifying or distributing the Program (or any work based on the
     Program), you indicate your acceptance of this License to do so, and
     all its terms and conditions for copying, distributing or modifying
     the Program or works based on it.

       6. Each time you redistribute the Program (or any work based on the
     Program), the recipient automatically receives a license from the
     original licensor to copy, distribute or modify the Program subject to
     these terms and conditions.  You may not impose any further
     restrictions on the recipients' exercise of the rights granted herein.
     You are not responsible for enforcing compliance by third parties to
     this License.

       7. If, as a consequence of a court judgment or allegation of patent
     infringement or for any other reason (not limited to patent issues),
     conditions are imposed on you (whether by court order, agreement or
     otherwise) that contradict the conditions of this License, they do not
     excuse you from the conditions of this License.  If you cannot
     distribute so as to satisfy simultaneously your obligations under this
     License and any other pertinent obligations, then as a consequence you
     may not distribute the Program at all.  For example, if a patent
     license would not permit royalty-free redistribution of the Program by
     all those who receive copies directly or indirectly through you, then
     the only way you could satisfy both it and this License would be to
     refrain entirely from distribution of the Program.

     If any portion of this section is held invalid or unenforceable under
     any particular circumstance, the balance of the section is intended to
     apply and the section as a whole is intended to apply in other
     circumstances.

     It is not the purpose of this section to induce you to infringe any
     patents or other property right claims or to contest validity of any
     such claims; this section has the sole purpose of protecting the
     integrity of the free software distribution system, which is
     implemented by public license practices.  Many people have made
     generous contributions to the wide range of software distributed
     through that system in reliance on consistent application of that
     system; it is up to the author/donor to decide if he or she is willing
     to distribute software through any other system and a licensee cannot
     impose that choice.

     This section is intended to make thoroughly clear what is believed to
     be a consequence of the rest of this License.

       8. If the distribution and/or use of the Program is restricted in
     certain countries either by patents or by copyrighted interfaces, the
     original copyright holder who places the Program under this License
     may add an explicit geographical distribution limitation excluding
     those countries, so that distribution is permitted only in or among
     countries not thus excluded.  In such case, this License incorporates
     the limitation as if written in the body of this License.

       9. The Free Software Foundation may publish revised and/or new
     versions of the General Public License from time to time.  Such new
     versions will be similar in spirit to the present version, but may
     differ in detail to address new problems or concerns.

     Each version is given a distinguishing version number.  If the Program
     specifies a version number of this License which applies to it and
     "any later version", you have the option of following the terms and
     conditions either of that version or of any later version published by
     the Free Software Foundation.  If the Program does not specify a
     version number of this License, you may choose any version ever
     published by the Free Software Foundation.

       10. If you wish to incorporate parts of the Program into other free
     programs whose distribution conditions are different, write to the
     author to ask for permission.  For software which is copyrighted by the
     Free Software Foundation, write to the Free Software Foundation; we
     sometimes make exceptions for this.  Our decision will be guided by the
     two goals of preserving the free status of all derivatives of our free
     software and of promoting the sharing and reuse of software generally.

                                 NO WARRANTY

       11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
     WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
     EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
     OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND,
     EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
     THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS
     WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
     ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

       12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
     WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
     AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU
     FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
     CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
     PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
     RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
     FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF
     SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
     DAMAGES.

                          END OF TERMS AND CONDITIONS

                 How to Apply These Terms to Your New Programs

       If you develop a new program, and you want it to be of the greatest
     possible use to the public, the best way to achieve this is to make it
     free software which everyone can redistribute and change under these terms.

       To do so, attach the following notices to the program.  It is safest
     to attach them to the start of each source file to most effectively
     convey the exclusion of warranty; and each file should have at least
     the "copyright" line and a pointer to where the full notice is found.

         <one line to give the program's name and a brief idea of what it
         does.>
         Copyright (C) <year>  <name of author>

         This program is free software; you can redistribute it and/or
         modify it under the terms of the GNU General Public License as
         published by     the Free Software Foundation; either version
         2 of the License, or (at your option) any later version.

         This program is distributed in the hope that it will be useful,
         but WITHOUT ANY WARRANTY; without even the implied warranty of
         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
         GNU General Public License for more details.

         You should have received a copy of the GNU General Public License
         along with this program; if not, write to the Free Software
         Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
         02110-1301 USA.

     Also add information on how to contact you by electronic and paper mail.

     If the program is interactive, make it output a short notice like this
     when it starts in an interactive mode:

         Gnomovision version 69, Copyright (C) year name of author
         Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
         type 'show w'. This is free software, and you are welcome
         to redistribute it under certain conditions; type 'show c'
         for details.

     The hypothetical commands 'show w' and 'show c' should show the
     appropriate parts of the General Public License.  Of course, the
     commands you use may be called something other than 'show w' and
     'show c'; they could even be mouse-clicks or menu items--whatever
     suits your program.

     You should also get your employer (if you work as a programmer) or your
     school, if any, to sign a "copyright disclaimer" for the program, if
     necessary.  Here is a sample; alter the names:

       Yoyodyne, Inc., hereby disclaims all copyright interest in the
       program 'Gnomovision' (which makes passes at compilers) written
       by James Hacker.

       <signature of Ty Coon>, 1 April 1989
       Ty Coon, President of Vice

     This General Public License does not permit incorporating your program
     into proprietary programs.  If your program is a subroutine library,
     you may consider it more useful to permit linking proprietary
     applications with the library.  If this is what you want to do, use
     the GNU Lesser General Public License instead of this License.


File: manual.info,  Node: license-gnu-lgpl-2-1,  Next: license-gnu-libtool,  Prev: license-gnu-gpl-2-0,  Up: licenses-third-party

A.15 GNU Lesser General Public License Version 2.1, February 1999
=================================================================

     The following applies to all products licensed under the
     GNU Lesser General Public License, Version 2.1: You may
     not use the identified files except in compliance with
     the GNU Lesser General Public License, Version 2.1 (the
     "License"). You may obtain a copy of the License at
     http://www.gnu.org/licenses/lgpl-2.1.html. A copy of the
     license is also reproduced below. Unless required by
     applicable law or agreed to in writing, software distributed
     under the License is distributed on an "AS IS" BASIS,
     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express
     or implied. See the License for the specific language governing
     permissions and limitations under the License.

                       GNU LESSER GENERAL PUBLIC LICENSE
                            Version 2.1, February 1999

      Copyright (C) 1991, 1999 Free Software Foundation, Inc.
      51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
      Everyone is permitted to copy and distribute verbatim copies
      of this license document, but changing it is not allowed.

     [This is the first released version of the Lesser GPL.  It also counts
      as the successor of the GNU Library Public License, version 2, hence
      the version number 2.1.]

                                 Preamble

       The licenses for most software are designed to take away your
     freedom to share and change it.  By contrast, the GNU General Public
     Licenses are intended to guarantee your freedom to share and change
     free software--to make sure the software is free for all its users.

       This license, the Lesser General Public License, applies to some
     specially designated software packages--typically libraries--of the
     Free Software Foundation and other authors who decide to use it.  You
     can use it too, but we suggest you first think carefully about whether
     this license or the ordinary General Public License is the better
     strategy to use in any particular case, based on the explanations below.

       When we speak of free software, we are referring to freedom of use,
     not price.  Our General Public Licenses are designed to make sure that
     you have the freedom to distribute copies of free software (and charge
     for this service if you wish); that you receive source code or can get
     it if you want it; that you can change the software and use pieces of
     it in new free programs; and that you are informed that you can do
     these things.

       To protect your rights, we need to make restrictions that forbid
     distributors to deny you these rights or to ask you to surrender these
     rights.  These restrictions translate to certain responsibilities for
     you if you distribute copies of the library or if you modify it.

       For example, if you distribute copies of the library, whether gratis
     or for a fee, you must give the recipients all the rights that we gave
     you.  You must make sure that they, too, receive or can get the source
     code.  If you link other code with the library, you must provide
     complete object files to the recipients, so that they can relink them
     with the library after making changes to the library and recompiling
     it.  And you must show them these terms so they know their rights.

       We protect your rights with a two-step method: (1) we copyright the
     library, and (2) we offer you this license, which gives you legal
     permission to copy, distribute and/or modify the library.

       To protect each distributor, we want to make it very clear that
     there is no warranty for the free library.  Also, if the library is
     modified by someone else and passed on, the recipients should know
     that what they have is not the original version, so that the original
     author's reputation will not be affected by problems that might be
     introduced by others.

       Finally, software patents pose a constant threat to the existence of
     any free program.  We wish to make sure that a company cannot
     effectively restrict the users of a free program by obtaining a
     restrictive license from a patent holder.  Therefore, we insist that
     any patent license obtained for a version of the library must be
     consistent with the full freedom of use specified in this license.

       Most GNU software, including some libraries, is covered by the
     ordinary GNU General Public License.  This license, the GNU Lesser
     General Public License, applies to certain designated libraries, and
     is quite different from the ordinary General Public License.  We use
     this license for certain libraries in order to permit linking those
     libraries into non-free programs.

       When a program is linked with a library, whether statically or using
     a shared library, the combination of the two is legally speaking a
     combined work, a derivative of the original library.  The ordinary
     General Public License therefore permits such linking only if the
     entire combination fits its criteria of freedom.  The Lesser General
     Public License permits more lax criteria for linking other code with
     the library.

       We call this license the "Lesser" General Public License because it
     does Less to protect the user's freedom than the ordinary General
     Public License.  It also provides other free software developers Less
     of an advantage over competing non-free programs.  These disadvantages
     are the reason we use the ordinary General Public License for many
     libraries.  However, the Lesser license provides advantages in certain
     special circumstances.

       For example, on rare occasions, there may be a special need to
     encourage the widest possible use of a certain library, so that it
     becomes a de-facto standard.  To achieve this, non-free programs
     must be allowed to use the library.  A more frequent case is that
     a free library does the same job as widely used non-free libraries.
     In this case, there is little to gain by limiting the free library
     to free software only, so we use the Lesser General Public License.

       In other cases, permission to use a particular library in non-free
     programs enables a greater number of people to use a large body of
     free software.  For example, permission to use the GNU C Library in
     non-free programs enables many more people to use the whole GNU
     operating system, as well as its variant, the GNU/Linux operating
     system.

       Although the Lesser General Public License is Less protective of the
     users' freedom, it does ensure that the user of a program that is
     linked with the Library has the freedom and the wherewithal to run
     that program using a modified version of the Library.

       The precise terms and conditions for copying, distribution and
     modification follow.  Pay close attention to the difference between a
     "work based on the library" and a "work that uses the library".  The
     former contains code derived from the library, whereas the latter must
     be combined with the library in order to run.

                       GNU LESSER GENERAL PUBLIC LICENSE
        TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

       0. This License Agreement applies to any software library or other
     program which contains a notice placed by the copyright holder or
     other authorized party saying it may be distributed under the terms of
     this Lesser General Public License (also called "this License").
     Each licensee is addressed as "you".

       A "library" means a collection of software functions and/or data
     prepared so as to be conveniently linked with application programs
     (which use some of those functions and data) to form executables.

       The "Library", below, refers to any such software library or work
     which has been distributed under these terms.  A "work based on the
     Library" means either the Library or any derivative work under
     copyright law: that is to say, a work containing the Library or a
     portion of it, either verbatim or with modifications and/or translated
     straightforwardly into another language.  (Hereinafter, translation is
     included without limitation in the term "modification".)

       "Source code" for a work means the preferred form of the work for
     making modifications to it.  For a library, complete source code means
     all the source code for all modules it contains, plus any associated
     interface definition files, plus the scripts used to control
     compilation and installation of the library.

       Activities other than copying, distribution and modification are not
     covered by this License; they are outside its scope.  The act of
     running a program using the Library is not restricted, and output from
     such a program is covered only if its contents constitute a work based
     on the Library (independent of the use of the Library in a tool for
     writing it).  Whether that is true depends on what the Library does
     and what the program that uses the Library does.

       1. You may copy and distribute verbatim copies of the Library's
     complete source code as you receive it, in any medium, provided that
     you conspicuously and appropriately publish on each copy an
     appropriate copyright notice and disclaimer of warranty; keep intact
     all the notices that refer to this License and to the absence of any
     warranty; and distribute a copy of this License along with the
     Library.

       You may charge a fee for the physical act of transferring a copy,
     and you may at your option offer warranty protection in exchange for a
     fee.

       2. You may modify your copy or copies of the Library or any portion
     of it, thus forming a work based on the Library, and copy and
     distribute such modifications or work under the terms of Section 1
     above, provided that you also meet all of these conditions:

         a) The modified work must itself be a software library.

         b) You must cause the files modified to carry prominent notices
         stating that you changed the files and the date of any change.

         c) You must cause the whole of the work to be licensed at no
         charge to all third parties under the terms of this License.

         d) If a facility in the modified Library refers to a function or a
         table of data to be supplied by an application program that uses
         the facility, other than as an argument passed when the facility
         is invoked, then you must make a good faith effort to ensure that,
         in the event an application does not supply such function or
         table, the facility still operates, and performs whatever part of
         its purpose remains meaningful.

         (For example, a function in a library to compute square roots has
         a purpose that is entirely well-defined independent of the
         application.  Therefore, Subsection 2d requires that any
         application-supplied function or table used by this function must
         be optional: if the application does not supply it, the square
         root function must still compute square roots.)

     These requirements apply to the modified work as a whole.  If
     identifiable sections of that work are not derived from the Library,
     and can be reasonably considered independent and separate works in
     themselves, then this License, and its terms, do not apply to those
     sections when you distribute them as separate works.  But when you
     distribute the same sections as part of a whole which is a work based
     on the Library, the distribution of the whole must be on the terms of
     this License, whose permissions for other licensees extend to the
     entire whole, and thus to each and every part regardless of who wrote
     it.

     Thus, it is not the intent of this section to claim rights or contest
     your rights to work written entirely by you; rather, the intent is to
     exercise the right to control the distribution of derivative or
     collective works based on the Library.

     In addition, mere aggregation of another work not based on the Library
     with the Library (or with a work based on the Library) on a volume of
     a storage or distribution medium does not bring the other work under
     the scope of this License.

       3. You may opt to apply the terms of the ordinary GNU General Public
     License instead of this License to a given copy of the Library.  To do
     this, you must alter all the notices that refer to this License, so
     that they refer to the ordinary GNU General Public License, version 2,
     instead of to this License.  (If a newer version than version 2 of the
     ordinary GNU General Public License has appeared, then you can specify
     that version instead if you wish.)  Do not make any other change in
     these notices.

       Once this change is made in a given copy, it is irreversible for
     that copy, so the ordinary GNU General Public License applies to all
     subsequent copies and derivative works made from that copy.

       This option is useful when you wish to copy part of the code of
     the Library into a program that is not a library.

       4. You may copy and distribute the Library (or a portion or
     derivative of it, under Section 2) in object code or executable form
     under the terms of Sections 1 and 2 above provided that you accompany
     it with the complete corresponding machine-readable source code, which
     must be distributed under the terms of Sections 1 and 2 above on a
     medium customarily used for software interchange.

       If distribution of object code is made by offering access to copy
     from a designated place, then offering equivalent access to copy the
     source code from the same place satisfies the requirement to
     distribute the source code, even though third parties are not
     compelled to copy the source along with the object code.

       5. A program that contains no derivative of any portion of the
     Library, but is designed to work with the Library by being compiled or
     linked with it, is called a "work that uses the Library".  Such a
     work, in isolation, is not a derivative work of the Library, and
     therefore falls outside the scope of this License.

       However, linking a "work that uses the Library" with the Library
     creates an executable that is a derivative of the Library (because it
     contains portions of the Library), rather than a "work that uses the
     library".  The executable is therefore covered by this License.
     Section 6 states terms for distribution of such executables.

       When a "work that uses the Library" uses material from a header file
     that is part of the Library, the object code for the work may be a
     derivative work of the Library even though the source code is not.
     Whether this is true is especially significant if the work can be
     linked without the Library, or if the work is itself a library.  The
     threshold for this to be true is not precisely defined by law.

       If such an object file uses only numerical parameters, data
     structure layouts and accessors, and small macros and small inline
     functions (ten lines or less in length), then the use of the object
     file is unrestricted, regardless of whether it is legally a derivative
     work.  (Executables containing this object code plus portions of the
     Library will still fall under Section 6.)

       Otherwise, if the work is a derivative of the Library, you may
     distribute the object code for the work under the terms of Section 6.
     Any executables containing that work also fall under Section 6,
     whether or not they are linked directly with the Library itself.

       6. As an exception to the Sections above, you may also combine or
     link a "work that uses the Library" with the Library to produce a
     work containing portions of the Library, and distribute that work
     under terms of your choice, provided that the terms permit
     modification of the work for the customer's own use and reverse
     engineering for debugging such modifications.

       You must give prominent notice with each copy of the work that the
     Library is used in it and that the Library and its use are covered by
     this License.  You must supply a copy of this License.  If the work
     during execution displays copyright notices, you must include the
     copyright notice for the Library among them, as well as a reference
     directing the user to the copy of this License.  Also, you must do one
     of these things:

         a) Accompany the work with the complete corresponding
         machine-readable source code for the Library including whatever
         changes were used in the work (which must be distributed under
         Sections 1 and 2 above); and, if the work is an executable linked
         with the Library, with the complete machine-readable "work that
         uses the Library", as object code and/or source code, so that the
         user can modify the Library and then relink to produce a modified
         executable containing the modified Library.  (It is understood
         that the user who changes the contents of definitions files in the
         Library will not necessarily be able to recompile the application
         to use the modified definitions.)

         b) Use a suitable shared library mechanism for linking with the
         Library.  A suitable mechanism is one that (1) uses at run time a
         copy of the library already present on the user's computer system,
         rather than copying library functions into the executable, and (2)
         will operate properly with a modified version of the library, if
         the user installs one, as long as the modified version is
         interface-compatible with the version that the work was made with.

         c) Accompany the work with a written offer, valid for at
         least three years, to give the same user the materials
         specified in Subsection 6a, above, for a charge no more
         than the cost of performing this distribution.

         d) If distribution of the work is made by offering access to copy
         from a designated place, offer equivalent access to copy the above
         specified materials from the same place.

         e) Verify that the user has already received a copy of these
         materials or that you have already sent this user a copy.

       For an executable, the required form of the "work that uses the
     Library" must include any data and utility programs needed for
     reproducing the executable from it.  However, as a special exception,
     the materials to be distributed need not include anything that is
     normally distributed (in either source or binary form) with the major
     components (compiler, kernel, and so on) of the operating system on
     which the executable runs, unless that component itself accompanies
     the executable.

       It may happen that this requirement contradicts the license
     restrictions of other proprietary libraries that do not normally
     accompany the operating system.  Such a contradiction means you cannot
     use both them and the Library together in an executable that you
     distribute.

       7. You may place library facilities that are a work based on the
     Library side-by-side in a single library together with other library
     facilities not covered by this License, and distribute such a combined
     library, provided that the separate distribution of the work based on
     the Library and of the other library facilities is otherwise
     permitted, and provided that you do these two things:

         a) Accompany the combined library with a copy of the same work
         based on the Library, uncombined with any other library
         facilities.  This must be distributed under the terms of the
         Sections above.

         b) Give prominent notice with the combined library of the fact
         that part of it is a work based on the Library, and explaining
         where to find the accompanying uncombined form of the same work.

       8. You may not copy, modify, sublicense, link with, or distribute
     the Library except as expressly provided under this License.  Any
     attempt otherwise to copy, modify, sublicense, link with, or
     distribute the Library is void, and will automatically terminate your
     rights under this License.  However, parties who have received copies,
     or rights, from you under this License will not have their licenses
     terminated so long as such parties remain in full compliance.

       9. You are not required to accept this License, since you have not
     signed it.  However, nothing else grants you permission to modify or
     distribute the Library or its derivative works.  These actions are
     prohibited by law if you do not accept this License.  Therefore, by
     modifying or distributing the Library (or any work based on the
     Library), you indicate your acceptance of this License to do so, and
     all its terms and conditions for copying, distributing or modifying
     the Library or works based on it.

       10. Each time you redistribute the Library (or any work based on the
     Library), the recipient automatically receives a license from the
     original licensor to copy, distribute, link with or modify the Library
     subject to these terms and conditions.  You may not impose any further
     restrictions on the recipients' exercise of the rights granted herein.
     You are not responsible for enforcing compliance by third parties with
     this License.

       11. If, as a consequence of a court judgment or allegation of patent
     infringement or for any other reason (not limited to patent issues),
     conditions are imposed on you (whether by court order, agreement or
     otherwise) that contradict the conditions of this License, they do not
     excuse you from the conditions of this License.  If you cannot
     distribute so as to satisfy simultaneously your obligations under this
     License and any other pertinent obligations, then as a consequence you
     may not distribute the Library at all.  For example, if a patent
     license would not permit royalty-free redistribution of the Library by
     all those who receive copies directly or indirectly through you, then
     the only way you could satisfy both it and this License would be to
     refrain entirely from distribution of the Library.

     If any portion of this section is held invalid or unenforceable under
     any particular circumstance, the balance of the section is intended
     to apply, and the section as a whole is intended to apply in other
     circumstances.

     It is not the purpose of this section to induce you to infringe any
     patents or other property right claims or to contest validity of any
     such claims; this section has the sole purpose of protecting the
     integrity of the free software distribution system which is
     implemented by public license practices.  Many people have made
     generous contributions to the wide range of software distributed
     through that system in reliance on consistent application of that
     system; it is up to the author/donor to decide if he or she is willing
     to distribute software through any other system and a licensee cannot
     impose that choice.

     This section is intended to make thoroughly clear what is believed to
     be a consequence of the rest of this License.

       12. If the distribution and/or use of the Library is restricted in
     certain countries either by patents or by copyrighted interfaces, the
     original copyright holder who places the Library under this License
     may add an explicit geographical distribution limitation excluding
     those countries, so that distribution is permitted only in or among
     countries not thus excluded.  In such case, this License incorporates
     the limitation as if written in the body of this License.

       13. The Free Software Foundation may publish revised and/or new
     versions of the Lesser General Public License from time to time.
     Such new versions will be similar in spirit to the present version,
     but may differ in detail to address new problems or concerns.

     Each version is given a distinguishing version number.  If the Library
     specifies a version number of this License which applies to it and
     "any later version", you have the option of following the terms and
     conditions either of that version or of any later version published by
     the Free Software Foundation.  If the Library does not specify a
     license version number, you may choose any version ever published by
     the Free Software Foundation.

       14. If you wish to incorporate parts of the Library into other free
     programs whose distribution conditions are incompatible with these,
     write to the author to ask for permission.  For software which is
     copyrighted by the Free Software Foundation, write to the Free
     Software Foundation; we sometimes make exceptions for this.  Our
     decision will be guided by the two goals of preserving the free status
     of all derivatives of our free software and of promoting the sharing
     and reuse of software generally.

                                 NO WARRANTY

       15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
     WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
     EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
     OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
     KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
     IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
     LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
     THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

       16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
     WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
     AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
     FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
     CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
     LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
     RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
     FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
     SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
     DAMAGES.

                          END OF TERMS AND CONDITIONS

                How to Apply These Terms to Your New Libraries

       If you develop a new library, and you want it to be of the greatest
     possible use to the public, we recommend making it free software that
     everyone can redistribute and change.  You can do so by permitting
     redistribution under these terms (or, alternatively, under the terms
     of the ordinary General Public License).

       To apply these terms, attach the following notices to the library.
     It is safest to attach them to the start of each source file to most
     effectively convey the exclusion of warranty; and each file should
     have at least the "copyright" line and a pointer to where the full
     notice is found.

         <one line to give the library's name and a brief idea of what it does.>
         Copyright (C) <year>  <name of author>

         This library is free software; you can redistribute it and/or
         modify it under the terms of the GNU Lesser General Public
         License as published by the Free Software Foundation; either
         version 2.1 of the License, or (at your option) any later version.

         This library is distributed in the hope that it will be useful,
         but WITHOUT ANY WARRANTY; without even the implied warranty of
         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
         Lesser General Public License for more details.

         You should have received a copy of the GNU Lesser General Public
         License along with this library; if not, write to the Free Software
         Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
         02110-1301  USA

     Also add information on how to contact you by electronic and paper mail.

     You should also get your employer (if you work as a programmer) or your
     school, if any, to sign a "copyright disclaimer" for the library, if
     necessary.  Here is a sample; alter the names:

       Yoyodyne, Inc., hereby disclaims all copyright interest in the
       library `Frob' (a library for tweaking knobs) written by James
       Random Hacker.

       <signature of Ty Coon>, 1 April 1990
       Ty Coon, President of Vice

     That's all there is to it!


File: manual.info,  Node: license-gnu-libtool,  Next: license-gnu-readline,  Prev: license-gnu-lgpl-2-1,  Up: licenses-third-party

A.16 GNU Libtool License
========================

The following software may be included in this product:

GNU Libtool (The GNU Portable Library Tool)

     If you are receiving a copy of the Oracle software in
     source code, you are also receiving a copy of two files
     (ltmain.sh and ltdl.h) generated by the GNU Libtool in
     source code. If you received the Oracle software under
     a license other than a commercial (non-GPL) license,
     then the terms of the Oracle license do NOT apply to
     these files from GNU Libtool; they are licensed under
     the following licenses, separately from the Oracle
     programs you receive.

     Oracle elects to use GNU General Public License version
     2 (GPL) for any software where a choice of GPL or GNU
     Lesser/Library General Public License (LGPL) license
     versions are made available with the language indicating
     that GPL/LGPL or any later version may be used, or where
     a choice of which version of the GPL/LGPL is applied is
     unspecified.

     From GNU Libtool:

     ltmain.sh - Provide generalized library-building support
     services.
     NOTE: Changing this file will not affect anything until
     you rerun configure.
     Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004,
     2005, 2006, 2007 Free Software Foundation, Inc.
     Originally by Gordon Matzigkeit, 1996

     This program is free software; you can redistribute it
     and/or modify it under the terms of the GNU General
     Public License as published by the Free Software Foundation;
     either version 2 of the License, or (at your option) any
     later version.

     This program is distributed in the hope that it will be
     useful, but WITHOUT ANY WARRANTY; without even the implied
     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
     PURPOSE. See the GNU General Public License for more
     details. You should have received a copy of the GNU General
     Public License along with this program; if not, write to
     the Free Software Foundation, Inc., 51 Franklin Street,
     Fifth Floor, Boston, MA 02110-1301, USA.

     As a special exception to the GNU General Public License,
     if you distribute this file as part of a program that
     contains a configuration script generated by Autoconf,
     you may include it under the same distribution terms that
     you use for the rest of that program.

This component is licensed under *Note license-gnu-gpl-2-0::


File: manual.info,  Node: license-gnu-readline,  Next: license-google-io-rate-patch,  Prev: license-gnu-libtool,  Up: licenses-third-party

A.17 GNU Readline License
=========================

The following software may be included in this product:

GNU Readline Library

     GNU Readline Library
     With respect to MySQL Server/Cluster software licensed
     under GNU General Public License, you are receiving a
     copy of the GNU Readline Library in source code. The
     terms of any Oracle license that might accompany the
     Oracle programs do NOT apply to the GNU Readline Library;
     it is licensed under the following license, separately
     from the Oracle programs you receive. Oracle elects to
     use GNU General Public License version 2 (GPL) for any
     software where a choice of GPL license versions are
     made available with the language indicating that GPLv2
     or any later version may be used, or where a choice of
     which version of the GPL is applied is unspecified.

This component is licensed under *Note license-gnu-gpl-2-0::


File: manual.info,  Node: license-google-io-rate-patch,  Next: license-google-tcmalloc,  Prev: license-gnu-readline,  Up: licenses-third-party

A.18 Google Controlling Master Thread I/O Rate Patch License
============================================================

The following software may be included in this product:

Google Controlling master thread I/O rate patch

     Copyright (c) 2009, Google Inc.
     All rights reserved.

     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions
     are met:

      * Redistributions of source code must retain the above copyright
        notice, this list of conditions and the following disclaimer.
      * Redistributions in binary form must reproduce the above copyright
        notice, this list of conditions and the following disclaimer in the
        documentation and/or other materials provided with the distribution.
      * Neither the name of the Google Inc. nor the names of its contributors
        may be used to endorse or promote products derived from this software
        without specific prior written permission.

     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
     COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
     INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
     BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
     ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     POSSIBILITY OF SUCH DAMAGE.


File: manual.info,  Node: license-google-tcmalloc,  Next: license-google-smp-patch,  Prev: license-google-io-rate-patch,  Up: licenses-third-party

A.19 Google Perftools (TCMalloc utility) License
================================================

The following software may be included in this product:

     Google Perftools (TCMalloc utility)

     Copyright (c) 1998-2006, Google Inc.
     All rights reserved.

     Redistribution and use in source and binary forms, with or
     without modification, are permitted provided that the following
     conditions are met:

         * Redistributions of source code must retain the above
           copyright notice, this list of conditions and the following
           disclaimer.
         * Redistributions in binary form must reproduce the above
           copyright notice, this list of conditions and the following
           disclaimer in the documentation and/or other materials provided
           with the distribution.
         * Neither the name of Google Inc. nor the names of its
           contributors may be used to endorse or promote products
           derived from this software without specific prior written
           permission.

     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
     A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
     OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
     LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
     OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.


File: manual.info,  Node: license-google-smp-patch,  Next: license-jboss-common-jdbc-wrapper,  Prev: license-google-tcmalloc,  Up: licenses-third-party

A.20 Google SMP Patch License
=============================

The following software may be included in this product:

Google SMP Patch

     Google SMP patch

     Copyright (c) 2008, Google Inc.
     All rights reserved.

     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions
     are met:

      * Redistributions of source code must retain the above copyright
        notice, this list of conditions and the following disclaimer.
      * Redistributions in binary form must reproduce the above copyright
        notice, this list of conditions and the following disclaimer in the
        documentation and/or other materials provided with the distribution.
      * Neither the name of the Google Inc. nor the names of its contributors
        may be used to endorse or promote products derived from this software
        without specific prior written permission.

     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
     COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
     INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
     BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
     ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     POSSIBILITY OF SUCH DAMAGE.


File: manual.info,  Node: license-jboss-common-jdbc-wrapper,  Next: license-lib-sql,  Prev: license-google-smp-patch,  Up: licenses-third-party

A.21 jboss-common-jdbc-wrapper.jar License
==========================================

You are receiving a copy of `jboss-common-jdbc-wrapper.jar' in both
source and object code in the following
`/src/lib/jboss-common-jdbc-wrapper.jar'. The terms of the Oracle
license do NOT apply to `jboss-common-jdbc-wrapper.jar'; it is licensed
under the following license, separately from the Oracle programs you
receive. If you do not wish to install this library, you may remove the
file `/src/lib/jboss-common-jdbc-wrapper.jar', but the Oracle program
might not operate properly or at all without the library.

This component is licensed under *Note license-gnu-lgpl-2-1::.


File: manual.info,  Node: license-lib-sql,  Next: license-libaio,  Prev: license-jboss-common-jdbc-wrapper,  Up: licenses-third-party

A.22 `lib_sql.cc' License
=========================

The following software may be included in this product:

`lib_sql.cc'

     Copyright (c) 2000
     SWsoft company

     This material is provided "as is", with absolutely no warranty
     expressed or implied. Any use is at your own risk.

     Permission to use or copy this software for any purpose is hereby
     granted without fee, provided the above notices are retained on
     all copies. Permission to modify the code and to distribute modified
     code is granted, provided the above notices are retained, and a
     notice that the code was modified is included with the above copyright
     notice.

     This code was modified by the MySQL team.


File: manual.info,  Node: license-libaio,  Next: license-libevent,  Prev: license-lib-sql,  Up: licenses-third-party

A.23 Libaio License
===================

The following software may be included in this product:

     libaio

This component is licensed under *Note license-gnu-lgpl-2-1::.


File: manual.info,  Node: license-libevent,  Next: license-libiconv-proxy,  Prev: license-libaio,  Up: licenses-third-party

A.24 `libevent' License
=======================

The following software may be included in this product:

     libevent

     Copyright (c) 2000-2007 Niels Provos <provos@citi.umich.edu>
     All rights reserved.

     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions
     are met:
     1. Redistributions of source code must retain the above copyright
        notice, this list of conditions and the following disclaimer.
     2. Redistributions in binary form must reproduce the above copyright
        notice, this list of conditions and the following disclaimer in the
        documentation and/or other materials provided with the distribution.
     3. The name of the author may not be used to endorse or promote products
        derived from this software without specific prior written permission.

     THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE

     ==
     Parts developed by Adam Langley
     ==

     ==
     log.c
     Based on err.c, which was adapted from OpenBSD libc *err*warncode.

     Copyright (c) 2005 Nick Mathewson
     Copyright (c) 2000 Dug Song
     Copyright (c) 1993 The Regents of the University of California.
     All rights reserved.

     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions
     are met:
     1. Redistributions of source code must retain the above copyright
        notice, this list of conditions and the following disclaimer.
     2. Redistributions in binary form must reproduce the above copyright
        notice, this list of conditions and the following disclaimer in
        the documentation and/or other materials provided with the
        distribution.
     3. Neither the name of the University nor the names of its
        contributors may be used to endorse or promote products derived
        from this software without specific prior written permission.

     THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS"
     AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
     PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS
     OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
     LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
     USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
     AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
     IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
     THE POSSIBILITY OF SUCH DAMAGE.
     ==

     ==
     min_heap.h

     Copyright (c) 2006 Maxim Yegorushkin
     All rights reserved.

     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions
     are met:
     1. Redistributions of source code must retain the above copyright
        notice, this list of conditions and the following disclaimer.
     2. Redistributions in binary form must reproduce the above copyright
        notice, this list of conditions and the following disclaimer in
        the documentation and/or other materials provided with the
        distribution.
     3. The name of the author may not be used to endorse or promote
        products derived from this software without specific prior
        written permission.

     THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS
     OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
     GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
     IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
     IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     ==

     ==
     win32.c

     Copyright 2000-2002 Niels Provos
     Copyright 2003 Michael A. Davis
     All rights reserved.

     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions
     are met:
     1. Redistributions of source code must retain the above copyright
        notice, this list of conditions and the following disclaimer.
     2. Redistributions in binary form must reproduce the above copyright
        notice, this list of conditions and the following disclaimer in
        the documentation and/or other materials provided with the
        distribution.
     3.  The name of the author may not be used to endorse or promote
         products derived from this software without specific prior
         written permission.

     THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS
     OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
     GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
     IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
     IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     ==


File: manual.info,  Node: license-libiconv-proxy,  Next: license-libintl,  Prev: license-libevent,  Up: licenses-third-party

A.25 Libiconv License
=====================

The following software may be included in this product:

     Libiconv

     You are receiving a copy of the GNU LIBICONV Library. The terms of the Oracle
     license do NOT apply to the GNU LIBICONV Library; it is licensed under the
     following license, separately from the Oracle programs you receive. If you do
     not wish to install this program, you may delete [agent install
     dir]/lib/libiconv.* and [agent install dir]/licenses/lgpl/iconv files.

This component is licensed under *Note license-gnu-lgpl-2-1::.


File: manual.info,  Node: license-libintl,  Next: license-linux-pam,  Prev: license-libiconv-proxy,  Up: licenses-third-party

A.26 `libintl' License
======================

The following software may be included in this product:

libintl

     Copyright (C) 1994 X Consortium

     Permission is hereby granted, free of charge, to any person obtaining a copy of
     this software and associated documentation files (the "Software"), to deal in
     the Software without restriction, including without limitation the rights to
     use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
     the Software, and to permit persons to whom the Software is furnished to do so,
     subject to the following conditions:

     The above copyright notice and this permission notice shall be included in all
     copies or substantial portions of the Software.

     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
     IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
     FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE X CONSORTIUM
     BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
     CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
     SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

     Except as contained in this notice, the name of the X Consortium shall not be
     used in advertising or otherwise to promote the sale, use or other dealings in
     this Software without prior written authorization from the X Consortium.

     FSF changes to this file are in the public domain.
      .
     Copyright 1996-2007 Free Software Foundation, Inc. Taken from GNU libtool, 2001

     Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996

     This file is free software; the Free Software Foundation gives unlimited
     permission to copy and/or distribute it, with or without modifications, as long
     as this notice is preserved.
     .
     You are receiving a copy of the libintl library. The terms of the Oracle license
     do NOT apply to the libintl library; it is licensed under the following license,
     separately from the Oracle programs you receive. If you do not wish to install
     this program, you may create an "exclude" file and run tar with the X option.

     This component is licensed under *Note license-gnu-lgpl-2-1::.


File: manual.info,  Node: license-linux-pam,  Next: license-lpeg,  Prev: license-libintl,  Up: licenses-third-party

A.27 Linux-PAM License
======================

The following software may be included in this product:

     Linux-PAM (pam-devel, Pluggable authentication modules for Linux)

     Copyright Theodore Ts'o, 1996. All rights reserved.

     (For the avoidance of doubt, Oracle uses and distributes this
     component under the terms below and elects not to do so under
     the GPL even though the GPL is referenced as an option below.)

     Redistribution and use in source and binary forms, with or
     without modification, are permitted provided that the following
     conditions are met:

     1. Redistributions of source code must retain the above copyright
        notice, and the entire permission notice in its entirety,
        including the disclaimer of warranties.
     2. Redistributions in binary form must reproduce the above copyright
        notice, this list of conditions and the following disclaimer in
        the documentation and/or other materials provided with the
        distribution.
     3. The name of the author may not be used to endorse or promote
        products derived from this software without specific prior
        written permission.

     ALTERNATIVELY, this product may be distributed under the terms
     of the GNU Public License, in which case the provisions of the
     GPL are required INSTEAD OF the above restrictions. (This clause
     is necessary due to a potential bad interaction between the GPL
     and the restrictions contained in a BSD-style copyright.)

     THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
     WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
     DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
     INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
     SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
     STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
     OF THE POSSIBILITY OF SUCH DAMAGE.


File: manual.info,  Node: license-lpeg,  Next: license-lua,  Prev: license-linux-pam,  Up: licenses-third-party

A.28 `LPeg' Library License
===========================

The following software may be included in this product:

     LPeg

     Use of any of this software is governed by the terms of the license below:

     Copyright (C) 2008 Lua.org, PUC-Rio.

     Permission is hereby granted, free of charge, to any person obtaining a copy of
     this software and associated documentation files (the "Software"), to deal in
     the Software without restriction, including without limitation the rights to
     use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
     the Software, and to permit persons to whom the Software is furnished to do so,
     subject to the following conditions:

     The above copyright notice and this permission notice shall be included in all
     copies or substantial portions of the Software.

     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
     IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
     FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
     COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
     IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
     CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.


File: manual.info,  Node: license-lua,  Next: license-luafilesystem,  Prev: license-lpeg,  Up: licenses-third-party

A.29 Lua (liblua) License
=========================

The following software may be included in this product:

     Lua (liblua)

     Copyright (C) 1994-2008 Lua.org, PUC-Rio.

     Permission is hereby granted, free of charge, to any person obtaining
     a copy of this software and associated documentation files (the
     "Software"), to deal in the Software without restriction, including
     without limitation the rights to use, copy, modify, merge, publish,
     distribute, sublicense, and/or sell copies of the Software, and to
     permit persons to whom the Software is furnished to do so, subject
     to the following conditions:

     The above copyright notice and this permission notice shall be
     included in all copies or substantial portions of the Software.

     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
     OTHER DEALINGS IN THE SOFTWARE.


File: manual.info,  Node: license-luafilesystem,  Next: license-md5,  Prev: license-lua,  Up: licenses-third-party

A.30 `LuaFileSystem' Library License
====================================

The following software may be included in this product:

     LuaFileSystem

     Copyright (C) 2003 Kepler Project.

     Permission is hereby granted, free of charge, to any person obtaining
     a copy of this software and associated documentation files (the
     "Software"), to deal in the Software without restriction, including
     without limitation the rights to use, copy, modify, merge, publish,
     distribute, sublicense, and/or sell copies of the Software, and to
     permit persons to whom the Software is furnished to do so, subject
     to the following conditions:

     The above copyright notice and this permission notice shall be
     included in all copies or substantial portions of the Software.

     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
     MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
     IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR
     ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
     CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
     WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.


File: manual.info,  Node: license-md5,  Next: license-memcached,  Prev: license-luafilesystem,  Up: licenses-third-party

A.31 md5 (Message-Digest Algorithm 5) License
=============================================

The following software may be included in this product:

     md5 (Message-Digest Algorithm 5)

      This code implements the MD5 message-digest algorithm.
      The algorithm is due to Ron Rivest.  This code was
      written by Colin Plumb in 1993, no copyright is claimed.
      This code is in the public domain; do with it what you wish.

      Equivalent code is available from RSA Data Security, Inc.
      This code has been tested against that, and is equivalent,
      except that you don't need to include two pages of legalese
      with every copy.

      The code has been modified by Mikael Ronstroem to handle
      calculating a hash value of a key that is always a multiple
      of 4 bytes long. Word 0 of the calculated 4-word hash value
      is returned as the hash value.


File: manual.info,  Node: license-memcached,  Next: license-nt-servc,  Prev: license-md5,  Up: licenses-third-party

A.32 `memcached' License
========================

The following software may be included in this product:

memcached

     Copyright (c) 2003, Danga Interactive, Inc.
     All rights reserved.

     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions
     are met:

         * Redistributions of source code must retain the above copyright
     notice, this list of conditions and the following disclaimer.

         * Redistributions in binary form must reproduce the above
     copyright notice, this list of conditions and the following disclaimer
     in the documentation and/or other materials provided with the
     distribution.

         * Neither the name of the Danga Interactive nor the names of its
     contributors may be used to endorse or promote products derived from
     this software without specific prior written permission.

     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
     A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
     OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
     LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
     OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.


File: manual.info,  Node: license-nt-servc,  Next: license-openpam,  Prev: license-memcached,  Up: licenses-third-party

A.33 nt_servc (Windows NT Service class library) License
========================================================

The following software may be included in this product:

nt_servc (Windows NT Service class library)

     Windows NT Service class library
     Copyright Abandoned 1998 Irena Pancirov - Irnet Snc
     This file is public domain and comes with NO WARRANTY of any kind


File: manual.info,  Node: license-openpam,  Next: license-openssl-1-0,  Prev: license-nt-servc,  Up: licenses-third-party

A.34 OpenPAM License
====================

The following software may be included in this product:

OpenPAM

     Copyright (c) 2002-2003 Networks Associates Technology, Inc.
     Copyright (c) 2004-2007 Dag-Erling Sm/orgrav
     All rights reserved.

     This software was developed for the FreeBSD Project by
     ThinkSec AS and Network Associates Laboratories, the
     Security Research Division of Network Associates, Inc.
     under DARPA/SPAWAR contract N66001-01-C-8035 ("CBOSS"),
     as part of the DARPA CHATS research program.

     Redistribution and use in source and binary forms,
     with or without modification, are permitted provided
     that the following conditions are met:

     1. Redistributions of source code must retain the above
        copyright notice, this list of conditions and the
        following disclaimer.
     2. Redistributions in binary form must reproduce the
        above copyright notice, this list of conditions and
        the following disclaimer in the documentation and/or
        other materials provided with the distribution.
     3. The name of the author may not be used to endorse or
        promote products derived from this software without
        specific prior written permission.

     THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS
     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
     BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
     AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
     NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
     ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
     PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
     AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
     IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.


File: manual.info,  Node: license-openssl-1-0,  Next: license-paramiko,  Prev: license-openpam,  Up: licenses-third-party

A.35 OpenSSL v1.0 License
=========================

The following software may be included in this product:

     NOTE: Does not apply to GPL licensed server (OpenSSL is not shipped with it)

     OpenSSL v1.0

     LICENSE ISSUES
     ==============
     The OpenSSL toolkit stays under a dual license, i.e. both the conditions of
     the OpenSSL License and the original SSLeay license apply to the toolkit. See
     below for the actual license texts. Actually both licenses are BSD-style Open
     Source licenses. In case of any license issues related to OpenSSL please
     contact openssl-core@openssl.org.

     OpenSSL License
     ---------------
     / ====================================================================
     Copyright (c) 1998-2008 The OpenSSL Project.
     All rights reserved.
     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions are met:
     .
     1. Redistributions of source code must retain the above copyright notice,
     this list of conditions and the following disclaimer.
     2. Redistributions in binary form must reproduce the above copyright notice,
     this list of conditions and the following disclaimer in the documentation
     and/or other materials provided with the distribution.
     3. All advertising materials mentioning features or use of this software must
     display the following acknowledgment:  "This product includes software
     developed by the OpenSSL Project for use in the OpenSSL Toolkit. (Link1 /)"
     .
     4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
     endorse or promote products derived from this software without prior written
     permission. For written permission, please contact openssl-core@openssl.org.

     5. Products derived from this software may not be called "OpenSSL" nor may
     "OpenSSL" appear in their names without prior written permission of the
     OpenSSL Project.
     6. Redistributions of any form whatsoever must retain the following
     acknowledgment:  "This product includes software developed by the OpenSSL
     Project for use in the OpenSSL Toolkit (Link2 /)"
     .
     THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY  EXPRESSED
     OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE  IMPLIED WARRANTIES
     OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  PURPOSE ARE DISCLAIMED. IN
     NO EVENT SHALL THE OpenSSL PROJECT OR  ITS CONTRIBUTORS BE LIABLE FOR ANY
     DIRECT, INDIRECT, INCIDENTAL,  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
     (INCLUDING, BUT  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
      LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)  HOWEVER CAUSED AND
     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,  STRICT LIABILITY, OR TORT
     (INCLUDING NEGLIGENCE OR OTHERWISE)  ARISING IN ANY WAY OUT OF THE USE OF
     THIS SOFTWARE, EVEN IF ADVISED  OF THE POSSIBILITY OF SUCH DAMAGE.
     ====================================================================
     This product includes cryptographic software written by Eric Young
     (eay@cryptsoft.com). This product includes software written by Tim Hudson
     (tjh@cryptsoft.com).

     Original SSLeay License
     -----------------------
     / Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
     All rights reserved.
     This package is an SSL implementation written by Eric Young
     (eay@cryptsoft.com).  The implementation was written so as to conform with
     Netscapes SSL.   This library is free for commercial and non-commercial use
     as long as the following conditions are aheared to. The following conditions
     apply to all code found in this distribution, be it the RC4, RSA,  lhash,
     DES, etc., code; not just the SSL code. The SSL documentation included with
     this distribution is covered by the same copyright terms except that the
     holder is Tim Hudson (tjh@cryptsoft.com).   Copyright remains Eric Young's,
     and as such any Copyright notices in the code are not to be removed.  If this
     package is used in a product, Eric Young should be given attribution as the
     author of the parts of the library used.  This can be in the form of a
     textual message at program startup or in documentation (online or textual)
     provided with the package.   Redistribution and use in source and binary
     forms, with or without modification, are permitted provided that the
     following conditions are met:  1. Redistributions of source code must retain
     the copyright notice, this list of conditions and the following disclaimer.
     2. Redistributions in binary form must reproduce the above copyright notice,
     this list of conditions and the following disclaimer in the documentation
     and/or other materials provided with the distribution.  3. All advertising
     materials mentioning features or use of this software must display the
     following acknowledgement:  "This product includes cryptographic software
     written by Eric Young (eay@cryptsoft.com)" The word 'cryptographic' can be
     left out if the routines from the library being used are not cryptographic
     related :-).  4. If you include any Windows specific code (or a derivative
     thereof) from the apps directory (application code) you must include an
     acknowledgement:  "This product includes software written by Tim Hudson
     (tjh@cryptsoft.com)"   THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
     ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE  ARE
     DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE  FOR ANY
     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL  DAMAGES
     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS  OR SERVICES;
     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)  HOWEVER CAUSED AND
     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT  LIABILITY, OR TORT
     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY  OUT OF THE USE OF
     THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF  SUCH DAMAGE.   The
     license and distribution terms for any publically available version or
     derivative of this code cannot be changed. i.e. this code cannot simply be
     copied and put under another distribution license  [including the GNU Public
     License.]


File: manual.info,  Node: license-paramiko,  Next: license-pcre,  Prev: license-openssl-1-0,  Up: licenses-third-party

A.36 Paramiko License
=====================

The following software may be included in this product:

     Paramiko

     You are receiving a copy of Paramiko in both source and object code. The
     terms of the Oracle license do NOT apply to the Paramiko program; it is
     licensed under the following license, separately from the Oracle
     programs you receive. If you do not wish to install this program, you
     may delete the Paramiko folder and all its contents.

This component is licensed under *Note license-gnu-lgpl-2-1::.


File: manual.info,  Node: license-pcre,  Next: license-percona-io-threads-patch,  Prev: license-paramiko,  Up: licenses-third-party

A.37 PCRE License
=================

The following software may be included in this product:

PCRE (Perl Compatible Regular Expressions) Library

     PCRE LICENCE

     PCRE is a library of functions to support regular expressions
     whose syntax and semantics are as close as possible to those
     of the Perl 5 language.

     Release 7 of PCRE is distributed under the terms of the "BSD"
     licence, as specified below. The documentation for PCRE,
     supplied in the "doc" directory, is distributed under the same
     terms as the software itself.

     The basic library functions are written in C and are
     freestanding. Also included in the distribution is a set
     of C++ wrapper functions.

     THE BASIC LIBRARY FUNCTIONS
     ---------------------------
     Written by:       Philip Hazel
     Email local part: ph10
     Email domain:     cam.ac.uk

     University of Cambridge Computing Service,
     Cambridge, England. Phone: +44 1223 334714.

     Copyright (c) 1997-2006 University of Cambridge
     All rights reserved.

     THE C++ WRAPPER FUNCTIONS
     -------------------------
     Contributed by:   Google Inc.

     Copyright (c) 2006, Google Inc.
     All rights reserved.

     THE "BSD" LICENCE
     -----------------

     Redistribution and use in source and binary forms,
     with or without modification, are permitted provided
     that the following conditions are met:

     * Redistributions of source code must retain the above
       copyright notice, this list of conditions and the
       following disclaimer.
     * Redistributions in binary form must reproduce the
       above copyright notice, this list of conditions and
       the following disclaimer in the documentation and/or
       other materials provided with the distribution.
     * Neither the name of the University of Cambridge nor
       the name of Google Inc. nor the names of their contributors
       may be used to endorse or promote products derived from
       this software without specific prior written permission.

     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
     BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
     OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
     OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
     OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
     LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
     NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

     End


File: manual.info,  Node: license-percona-io-threads-patch,  Next: license-python,  Prev: license-pcre,  Up: licenses-third-party

A.38 Percona Multiple I/O Threads Patch License
===============================================

The following software may be included in this product:

Percona Multiple I/O threads patch

     Copyright (c) 2008, 2009 Percona Inc
     All rights reserved.

     Redistribution and use of this software in source and binary forms,
     with or without modification, are permitted provided that the
     following conditions are met:

      * Redistributions of source code must retain the above copyright
        notice, this list of conditions and the following disclaimer.
      * Redistributions in binary form must reproduce the above copyright
        notice, this list of conditions and the following disclaimer in the
        documentation and/or other materials provided with the distribution.
      * Neither the name of Percona Inc. nor the names of its contributors
        may be used to endorse or promote products derived from this software
        without specific prior written permission of Percona Inc.

     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
     COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
     INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
     BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
     ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     POSSIBILITY OF SUCH DAMAGE.


File: manual.info,  Node: license-python,  Next: license-redhat-spec-file,  Prev: license-percona-io-threads-patch,  Up: licenses-third-party

A.39 Python License
===================

The following software may be included in this product:

     Python Programming Language

     This is the official license for the Python 2.7 release:

     A. HISTORY OF THE SOFTWARE
     Python was created in the early 1990s by Guido van Rossum at Stichting
     Mathematisch Centrum (CWI, see http://www.cwi.nl) in the Netherlands
     as a successor of a language called ABC.  Guido remains Python's
     principal author, although it includes many contributions from others.

     In 1995, Guido continued his work on Python at the Corporation for
     National Research Initiatives (CNRI, see http://www.cnri.reston.va.us)
     in Reston, Virginia where he released several versions of the
     software.

     In May 2000, Guido and the Python core development team moved to
     BeOpen.com to form the BeOpen PythonLabs team.  In October of the same
     year, the PythonLabs team moved to Digital Creations (now Zope
     Corporation, see http://www.zope.com).  In 2001, the Python Software
     Foundation (PSF, see http://www.python.org/psf/) was formed, a
     non-profit organization created specifically to own Python-related
     Intellectual Property.  Zope Corporation is a sponsoring member of
     the PSF.

     All Python releases are Open Source (see http://www.opensource.org for
     the Open Source Definition).  Historically, most, but not all, Python
     releases have also been GPL-compatible; the table below summarizes
     the various releases.

         Release         Derived     Year        Owner       GPL-
                         from                                compatible? (1)

         0.9.0 thru 1.2              1991-1995   CWI         yes
         1.3 thru 1.5.2  1.2         1995-1999   CNRI        yes
         1.6             1.5.2       2000        CNRI        no
         2.0             1.6         2000        BeOpen.com  no
         1.6.1           1.6         2001        CNRI        yes (2)
         2.1             2.0+1.6.1   2001        PSF         no
         2.0.1           2.0+1.6.1   2001        PSF         yes
         2.1.1           2.1+2.0.1   2001        PSF         yes
         2.2             2.1.1       2001        PSF         yes
         2.1.2           2.1.1       2002        PSF         yes
         2.1.3           2.1.2       2002        PSF         yes
         2.2.1           2.2         2002        PSF         yes
         2.2.2           2.2.1       2002        PSF         yes
         2.2.3           2.2.2       2003        PSF         yes
         2.3             2.2.2       2002-2003   PSF         yes
         2.3.1           2.3         2002-2003   PSF         yes
         2.3.2           2.3.1       2002-2003   PSF         yes
         2.3.3           2.3.2       2002-2003   PSF         yes
         2.3.4           2.3.3       2004        PSF         yes
         2.3.5           2.3.4       2005        PSF         yes
         2.4             2.3         2004        PSF         yes
         2.4.1           2.4         2005        PSF         yes
         2.4.2           2.4.1       2005        PSF         yes
         2.4.3           2.4.2       2006        PSF         yes
         2.5             2.4         2006        PSF         yes
         2.5.1           2.5         2007        PSF         yes
         2.5.2           2.5.1       2008        PSF         yes
         2.5.3           2.5.2       2008        PSF         yes
         2.6             2.5         2008        PSF         yes
         2.6.1           2.6         2008        PSF         yes
         2.6.2           2.6.1       2009        PSF         yes
         2.6.3           2.6.2       2009        PSF         yes
         2.6.4           2.6.3       2010        PSF         yes
         2.7             2.6         2010        PSF         yes

     Footnotes:

     (1) GPL-compatible doesn't mean that we're distributing Python under
         the GPL.  All Python licenses, unlike the GPL, let you distribute
         a modified version without making your changes open source.  The
         GPL-compatible licenses make it possible to combine Python with
         other software that is released under the GPL; the others don't.

     (2) According to Richard Stallman, 1.6.1 is not GPL-compatible,
         because its license has a choice of law clause.  According to
         CNRI, however, Stallman's lawyer has told CNRI's lawyer that 1.6.1
         is "not incompatible" with the GPL.

     Thanks to the many outside volunteers who have worked under Guido's
     direction to make these releases possible.

     B. TERMS AND CONDITIONS FOR ACCESSING OR OTHERWISE USING PYTHON

     PYTHON SOFTWARE FOUNDATION LICENSE VERSION 2
     --------------------------------------------

     1. This LICENSE AGREEMENT is between the Python Software Foundation
     ("PSF"), and the Individual or Organization ("Licensee") accessing and
     otherwise using this software ("Python") in source or binary form and
     its associated documentation.

     2. Subject to the terms and conditions of this License Agreement, PSF
     hereby grants Licensee a nonexclusive, royalty-free, world-wide
     license to reproduce, analyze, test, perform and/or display publicly,
     prepare derivative works, distribute, and otherwise use Python
     alone or in any derivative version, provided, however, that PSF's
     License Agreement and PSF's notice of copyright, i.e., "Copyright (c)
     2001, 2002, 2003, 2004, 2005, 2006 Python Software Foundation; All Rights
     Reserved" are retained in Python alone or in any derivative version
     prepared by Licensee.

     3. In the event Licensee prepares a derivative work that is based on
     or incorporates Python or any part thereof, and wants to make
     the derivative work available to others as provided herein, then
     Licensee hereby agrees to include in any such work a brief summary of
     the changes made to Python.

     4. PSF is making Python available to Licensee on an "AS IS"
     basis.  PSF MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR
     IMPLIED.  BY WAY OF EXAMPLE, BUT NOT LIMITATION, PSF MAKES NO AND
     DISCLAIMS ANY REPRESENTATION OR WARRANTY OF MERCHANTABILITY OR FITNESS
     FOR ANY PARTICULAR PURPOSE OR THAT THE USE OF PYTHON WILL NOT
     INFRINGE ANY THIRD PARTY RIGHTS.

     5. PSF SHALL NOT BE LIABLE TO LICENSEE OR ANY OTHER USERS OF PYTHON
     FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OR LOSS AS
     A RESULT OF MODIFYING, DISTRIBUTING, OR OTHERWISE USING PYTHON,
     OR ANY DERIVATIVE THEREOF, EVEN IF ADVISED OF THE POSSIBILITY THEREOF.

     6. This License Agreement will automatically terminate upon a material
     breach of its terms and conditions.

     7. Nothing in this License Agreement shall be deemed to create any
     relationship of agency, partnership, or joint venture between PSF and
     Licensee.  This License Agreement does not grant permission to use PSF
     trademarks or trade name in a trademark sense to endorse or promote
     products or services of Licensee, or any third party.

     8. By copying, installing or otherwise using Python, Licensee
     agrees to be bound by the terms and conditions of this License
     Agreement.

     BEOPEN.COM LICENSE AGREEMENT FOR PYTHON 2.0
     -------------------------------------------

     BEOPEN PYTHON OPEN SOURCE LICENSE AGREEMENT VERSION 1

     1. This LICENSE AGREEMENT is between BeOpen.com ("BeOpen"), having an
     office at 160 Saratoga Avenue, Santa Clara, CA 95051, and the
     Individual or Organization ("Licensee") accessing and otherwise using
     this software in source or binary form and its associated
     documentation ("the Software").

     2. Subject to the terms and conditions of this BeOpen Python License
     Agreement, BeOpen hereby grants Licensee a non-exclusive,
     royalty-free, world-wide license to reproduce, analyze, test, perform
     and/or display publicly, prepare derivative works, distribute, and
     otherwise use the Software alone or in any derivative version,
     provided, however, that the BeOpen Python License is retained in the
     Software, alone or in any derivative version prepared by Licensee.

     3. BeOpen is making the Software available to Licensee on an "AS IS"
     basis.  BEOPEN MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR
     IMPLIED.  BY WAY OF EXAMPLE, BUT NOT LIMITATION, BEOPEN MAKES NO AND
     DISCLAIMS ANY REPRESENTATION OR WARRANTY OF MERCHANTABILITY OR FITNESS
     FOR ANY PARTICULAR PURPOSE OR THAT THE USE OF THE SOFTWARE WILL NOT
     INFRINGE ANY THIRD PARTY RIGHTS.

     4. BEOPEN SHALL NOT BE LIABLE TO LICENSEE OR ANY OTHER USERS OF THE
     SOFTWARE FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OR LOSS
     AS A RESULT OF USING, MODIFYING OR DISTRIBUTING THE SOFTWARE, OR ANY
     DERIVATIVE THEREOF, EVEN IF ADVISED OF THE POSSIBILITY THEREOF.

     5. This License Agreement will automatically terminate upon a material
     breach of its terms and conditions.

     6. This License Agreement shall be governed by and interpreted in all
     respects by the law of the State of California, excluding conflict of
     law provisions.  Nothing in this License Agreement shall be deemed to
     create any relationship of agency, partnership, or joint venture
     between BeOpen and Licensee.  This License Agreement does not grant
     permission to use BeOpen trademarks or trade names in a trademark
     sense to endorse or promote products or services of Licensee, or any
     third party.  As an exception, the "BeOpen Python" logos available at
     http://www.pythonlabs.com/logos.html may be used according to the
     permissions granted on that web page.

     7. By copying, installing or otherwise using the software, Licensee
     agrees to be bound by the terms and conditions of this License
     Agreement.

     CNRI LICENSE AGREEMENT FOR PYTHON 1.6.1
     ---------------------------------------

     1. This LICENSE AGREEMENT is between the Corporation for National
     Research Initiatives, having an office at 1895 Preston White Drive,
     Reston, VA 20191 ("CNRI"), and the Individual or Organization
     ("Licensee") accessing and otherwise using Python 1.6.1 software in
     source or binary form and its associated documentation.

     2. Subject to the terms and conditions of this License Agreement, CNRI
     hereby grants Licensee a nonexclusive, royalty-free, world-wide
     license to reproduce, analyze, test, perform and/or display publicly,
     prepare derivative works, distribute, and otherwise use Python 1.6.1
     alone or in any derivative version, provided, however, that CNRI's
     License Agreement and CNRI's notice of copyright, i.e., "Copyright (c)
     1995-2001 Corporation for National Research Initiatives; All Rights
     Reserved" are retained in Python 1.6.1 alone or in any derivative
     version prepared by Licensee.  Alternately, in lieu of CNRI's License
     Agreement, Licensee may substitute the following text (omitting the
     quotes): "Python 1.6.1 is made available subject to the terms and
     conditions in CNRI's License Agreement.  This Agreement together with
     Python 1.6.1 may be located on the Internet using the following
     unique, persistent identifier (known as a handle): 1895.22/1013.  This
     Agreement may also be obtained from a proxy server on the Internet
     using the following URL: http://hdl.handle.net/1895.22/1013".

     3. In the event Licensee prepares a derivative work that is based on
     or incorporates Python 1.6.1 or any part thereof, and wants to make
     the derivative work available to others as provided herein, then
     Licensee hereby agrees to include in any such work a brief summary of
     the changes made to Python 1.6.1.

     4. CNRI is making Python 1.6.1 available to Licensee on an "AS IS"
     basis.  CNRI MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR
     IMPLIED.  BY WAY OF EXAMPLE, BUT NOT LIMITATION, CNRI MAKES NO AND
     DISCLAIMS ANY REPRESENTATION OR WARRANTY OF MERCHANTABILITY OR FITNESS
     FOR ANY PARTICULAR PURPOSE OR THAT THE USE OF PYTHON 1.6.1 WILL NOT
     INFRINGE ANY THIRD PARTY RIGHTS.

     5. CNRI SHALL NOT BE LIABLE TO LICENSEE OR ANY OTHER USERS OF PYTHON
     1.6.1 FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OR LOSS AS
     A RESULT OF MODIFYING, DISTRIBUTING, OR OTHERWISE USING PYTHON 1.6.1,
     OR ANY DERIVATIVE THEREOF, EVEN IF ADVISED OF THE POSSIBILITY THEREOF.

     6. This License Agreement will automatically terminate upon a material
     breach of its terms and conditions.

     7. This License Agreement shall be governed by the federal
     intellectual property law of the United States, including without
     limitation the federal copyright law, and, to the extent such
     U.S. federal law does not apply, by the law of the Commonwealth of
     Virginia, excluding Virginia's conflict of law provisions.
     Notwithstanding the foregoing, with regard to derivative works based
     on Python 1.6.1 that incorporate non-separable material that was
     previously distributed under the GNU General Public License (GPL), the
     law of the Commonwealth of Virginia shall govern this License
     Agreement only as to issues arising under or with respect to
     Paragraphs 4, 5, and 7 of this License Agreement.  Nothing in this
     License Agreement shall be deemed to create any relationship of
     agency, partnership, or joint venture between CNRI and Licensee.  This
     License Agreement does not grant permission to use CNRI trademarks or
     trade name in a trademark sense to endorse or promote products or
     services of Licensee, or any third party.

     8. By clicking on the "ACCEPT" button where indicated, or by copying,
     installing or otherwise using Python 1.6.1, Licensee agrees to be
     bound by the terms and conditions of this License Agreement.

             ACCEPT

     CWI LICENSE AGREEMENT FOR PYTHON 0.9.0 THROUGH 1.2
     --------------------------------------------------

     Copyright (c) 1991 - 1995, Stichting Mathematisch Centrum Amsterdam,
     The Netherlands.  All rights reserved.

     Permission to use, copy, modify, and distribute this software and its
     documentation for any purpose and without fee is hereby granted,
     provided that the above copyright notice appear in all copies and that
     both that copyright notice and this permission notice appear in
     supporting documentation, and that the name of Stichting Mathematisch
     Centrum or CWI not be used in advertising or publicity pertaining to
     distribution of the software without specific, written prior
     permission.

     STICHTING MATHEMATISCH CENTRUM DISCLAIMS ALL WARRANTIES WITH REGARD TO
     THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
     FITNESS, IN NO EVENT SHALL STICHTING MATHEMATISCH CENTRUM BE LIABLE
     FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
     WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
     ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
     OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

     Licenses and Acknowledgements for Incorporated Software
     ========================================================

     This section is an incomplete, but growing list of licenses and acknowledgements
     for third-party software incorporated in the Python distribution.

     Mersenne Twister
     ================
     The _random module includes code based on a download from
       http://www.math.keio.ac.jp/ matumoto/MT2002/emt19937ar.html.
     The following are the verbatim comments from the original code:

     A C-program for MT19937, with initialization improved 2002/1/26.
     Coded by Takuji Nishimura and Makoto Matsumoto.

     Before using, initialize the state by using init_genrand(seed)
     or init_by_array(init_key, key_length).

     Copyright (C) 1997 - 2002, Makoto Matsumoto and Takuji Nishimura,
     All rights reserved.

     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions
     are met:

      1. Redistributions of source code must retain the above copyright
         notice, this list of conditions and the following disclaimer.

      2. Redistributions in binary form must reproduce the above copyright
         notice, this list of conditions and the following disclaimer in the
         documentation and/or other materials provided with the
         distribution.

      3. The names of its contributors may not be used to endorse or promote
         products derived from this software without specific prior written
         permission.

     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
     A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
     EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
     PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
     PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
     LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
     NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

     Any feedback is very welcome.
     http://www.math.keio.ac.jp/matumoto/emt.html
     email: matumoto@math.keio.ac.jp

     Sockets
     =======
     The socket module uses the functions, getaddrinfo(), and getnameinfo(), which
     are coded in separate source files from the WIDE Project, http://www.wide.ad.jp/.

     Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
     All rights reserved.

     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions
     are met:
     1. Redistributions of source code must retain the above copyright
        notice, this list of conditions and the following disclaimer.
     2. Redistributions in binary form must reproduce the above copyright
        notice, this list of conditions and the following disclaimer in the
        documentation and/or other materials provided with the distribution.
     3. Neither the name of the project nor the names of its contributors
        may be used to endorse or promote products derived from this
        software without specific prior written permission.

     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
     A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
     EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
     PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
     PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
     LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
     NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

     Floating point exception control
     ================================
     The source for the fpectl module includes the following notice:

       ---------------------------------------------------------------------
      /                       Copyright (c) 1996.                           \
     |          The Regents of the University of California.                 |
     |                        All rights reserved.                           |
     |                                                                       |
     |   Permission to use, copy, modify, and distribute this software for   |
     |   any purpose without fee is hereby granted, provided that this en-   |
     |   tire notice is included in all copies of any software which is or   |
     |   includes  a  copy  or  modification  of  this software and in all   |
     |   copies of the supporting documentation for such software.           |
     |                                                                       |
     |   This  work was produced at the University of California, Lawrence   |
     |   Livermore National Laboratory under  contract  no.  W-7405-ENG-48   |
     |   between  the  U.S.  Department  of  Energy and The Regents of the   |
     |   University of California for the operation of UC LLNL.              |
     |                                                                       |
     |                              DISCLAIMER                               |
     |                                                                       |
     |   This  software was prepared as an account of work sponsored by an   |
     |   agency of the United States Government. Neither the United States   |
     |   Government  nor the University of California nor any of their em-   |
     |   ployees, makes any warranty, express or implied, or  assumes  any   |
     |   liability  or  responsibility  for the accuracy, completeness, or   |
     |   usefulness of any information,  apparatus,  product,  or  process   |
     |   disclosed,   or  represents  that  its  use  would  not  infringe   |
     |   privately-owned rights. Reference herein to any specific  commer-   |
     |   cial  products,  process,  or  service  by trade name, trademark,   |
     |   manufacturer, or otherwise, does not  necessarily  constitute  or   |
     |   imply  its endorsement, recommendation, or favoring by the United   |
     |   States Government or the University of California. The views  and   |
     |   opinions  of authors expressed herein do not necessarily state or   |
     |   reflect those of the United States Government or  the  University   |
     |   of  California,  and shall not be used for advertising or product   |
      \  endorsement purposes.                                              /
       ---------------------------------------------------------------------

     MD5 message digest algorithm
     ============================
     The source code for the md5 module contains the following notice:

     Copyright (C) 1999, 2002 Aladdin Enterprises.  All rights reserved.

     This software is provided 'as-is', without any express or implied
     warranty.  In no event will the authors be held liable for any damages
     arising from the use of this software.

     Permission is granted to anyone to use this software for any purpose,
     including commercial applications, and to alter it and redistribute it
     freely, subject to the following restrictions:

     1. The origin of this software must not be misrepresented; you must not
        claim that you wrote the original software. If you use this software
        in a product, an acknowledgment in the product documentation would
        be appreciated but is not required.
     2. Altered source versions must be plainly marked as such, and must not
        be misrepresented as being the original software.
     3. This notice may not be removed or altered from any source
        distribution.

     L. Peter Deutsch
     ghost@aladdin.com

     Independent implementation of MD5 (RFC 1321).

     This code implements the MD5 Algorithm defined in RFC 1321, whose
     text is available at
           http://www.ietf.org/rfc/rfc1321.txt
     The code is derived from the text of the RFC, including the test suite
     (section A.5) but excluding the rest of Appendix A.  It does not include
     any code or documentation that is identified in the RFC as being
     copyrighted.

     The original and principal author of md5.h is L. Peter Deutsch
     <ghost@aladdin.com>.  Other authors are noted in the change history
     that follows (in reverse chronological order):

     2002-04-13 lpd Removed support for non-ANSI compilers; removed
           references to Ghostscript; clarified derivation from RFC 1321;
           now handles byte order either statically or dynamically.
     1999-11-04 lpd Edited comments slightly for automatic TOC extraction.
     1999-10-18 lpd Fixed typo in header comment (ansi2knr rather than md5);
           added conditionalization for C++ compilation from Martin
           Purschke <purschke@bnl.gov>.
     1999-05-03 lpd Original version.

     Asynchronous socket services
     ============================
     The asynchat and asyncore modules contain the following notice:

     Copyright 1996 by Sam Rushing

                             All Rights Reserved

     Permission to use, copy, modify, and distribute this software and
     its documentation for any purpose and without fee is hereby
     granted, provided that the above copyright notice appear in all
     copies and that both that copyright notice and this permission
     notice appear in supporting documentation, and that the name of Sam
     Rushing not be used in advertising or publicity pertaining to
     distribution of the software without specific, written prior
     permission.

     SAM RUSHING DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
     INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN
     NO EVENT SHALL SAM RUSHING BE LIABLE FOR ANY SPECIAL, INDIRECT OR
     CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
     OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
     NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
     CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

     Cookie management
     =================
     The Cookie module contains the following notice:

     Copyright 2000 by Timothy O'Malley <timo@alum.mit.edu>

                    All Rights Reserved

     Permission to use, copy, modify, and distribute this software
     and its documentation for any purpose and without fee is hereby
     granted, provided that the above copyright notice appear in all
     copies and that both that copyright notice and this permission
     notice appear in supporting documentation, and that the name of
     Timothy O'Malley  not be used in advertising or publicity
     pertaining to distribution of the software without specific, written
     prior permission.

     Timothy O'Malley DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS
     SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
     AND FITNESS, IN NO EVENT SHALL Timothy O'Malley BE LIABLE FOR
     ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
     WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
     WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
     ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
     PERFORMANCE OF THIS SOFTWARE.

     Profiling
     =========
     The profile and pstats modules contain the following notice:

     Copyright 1994, by InfoSeek Corporation, all rights reserved.
     Written by James Roskind

     Permission to use, copy, modify, and distribute this Python software
     and its associated documentation for any purpose (subject to the
     restriction in the following sentence) without fee is hereby granted,
     provided that the above copyright notice appears in all copies, and
     that both that copyright notice and this permission notice appear in
     supporting documentation, and that the name of InfoSeek not be used in
     advertising or publicity pertaining to distribution of the software
     without specific, written prior permission.  This permission is
     explicitly restricted to the copying and modification of the software
     to remain in Python, compiled Python, or other languages (such as C)
     wherein the modified or derived code is exclusively imported into a
     Python module.

     INFOSEEK CORPORATION DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS
     SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
     FITNESS. IN NO EVENT SHALL INFOSEEK CORPORATION BE LIABLE FOR ANY
     SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
     RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
     CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
     CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

     Execution tracing
     =================
     The trace module contains the following notice:

     portions copyright 2001, Autonomous Zones Industries, Inc., all rights...
     err...  reserved and offered to the public under the terms of the
     Python 2.2 license.
     Author: Zooko O'Whielacronx
     http://zooko.com/
     mailto:zooko@zooko.com

     Copyright 2000, Mojam Media, Inc., all rights reserved.
     Author: Skip Montanaro

     Copyright 1999, Bioreason, Inc., all rights reserved.
     Author: Andrew Dalke

     Copyright 1995-1997, Automatrix, Inc., all rights reserved.
     Author: Skip Montanaro

     Copyright 1991-1995, Stichting Mathematisch Centrum, all rights reserved.

     Permission to use, copy, modify, and distribute this Python software and
     its associated documentation for any purpose without fee is hereby
     granted, provided that the above copyright notice appears in all copies,
     and that both that copyright notice and this permission notice appear in
     supporting documentation, and that the name of neither Automatrix,
     Bioreason or Mojam Media be used in advertising or publicity pertaining to
     distribution of the software without specific, written prior permission.

     UUencode and UUdecode functions
     ===============================

     The uu module contains the following notice:

     Copyright 1994 by Lance Ellinghouse
     Cathedral City, California Republic, United States of America.
                            All Rights Reserved
     Permission to use, copy, modify, and distribute this software and its
     documentation for any purpose and without fee is hereby granted,
     provided that the above copyright notice appear in all copies and that
     both that copyright notice and this permission notice appear in
     supporting documentation, and that the name of Lance Ellinghouse
     not be used in advertising or publicity pertaining to distribution
     of the software without specific, written prior permission.
     LANCE ELLINGHOUSE DISCLAIMS ALL WARRANTIES WITH REGARD TO
     THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
     FITNESS, IN NO EVENT SHALL LANCE ELLINGHOUSE CENTRUM BE LIABLE
     FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
     WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
     ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
     OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

     Modified by Jack Jansen, CWI, July 1995:
     - Use binascii module to do the actual line-by-line conversion
       between ascii and binary. This results in a 1000-fold speedup. The C
       version is still 5 times faster, though.
     - Arguments more compliant with Python standard

     XML Remote Procedure Calls¶

     The xmlrpclib module contains the following notice:

         The XML-RPC client interface is

     Copyright (c) 1999-2002 by Secret Labs AB
     Copyright (c) 1999-2002 by Fredrik Lundh

     By obtaining, using, and/or copying this software and/or its
     associated documentation, you agree that you have read, understood,
     and will comply with the following terms and conditions:

     Permission to use, copy, modify, and distribute this software and
     its associated documentation for any purpose and without fee is
     hereby granted, provided that the above copyright notice appears in
     all copies, and that both that copyright notice and this permission
     notice appear in supporting documentation, and that the name of
     Secret Labs AB or the author not be used in advertising or publicity
     pertaining to distribution of the software without specific, written
     prior permission.

     SECRET LABS AB AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD
     TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANT-
     ABILITY AND FITNESS.  IN NO EVENT SHALL SECRET LABS AB OR THE AUTHOR
     BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY
     DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
     WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
     ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
     OF THIS SOFTWARE.

     test_epoll
     ==========
     The test_epoll contains the following notice:

     Copyright (c) 2001-2006 Twisted Matrix Laboratories.

     Permission is hereby granted, free of charge, to any person obtaining
     a copy of this software and associated documentation files (the
     "Software"), to deal in the Software without restriction, including
     without limitation the rights to use, copy, modify, merge, publish,
     distribute, sublicense, and/or sell copies of the Software, and to
     permit persons to whom the Software is furnished to do so, subject to
     the following conditions:

     The above copyright notice and this permission notice shall be
     included in all copies or substantial portions of the Software.

     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
     MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
     LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
     OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
     WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

     Select kqueue
     =============
     The select and contains the following notice for the kqueue interface:

     Copyright (c) 2000 Doug White, 2006 James Knight, 2007 Christian Heimes
     All rights reserved.

     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions
     are met:
     1. Redistributions of source code must retain the above copyright
        notice, this list of conditions and the following disclaimer.
     2. Redistributions in binary form must reproduce the above copyright
        notice, this list of conditions and the following disclaimer in the
        documentation and/or other materials provided with the distribution.

     THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
     ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
     FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     SUCH DAMAGE.

     strtod and dtoa
     ===============
     The file Python/dtoa.c, which supplies C functions dtoa and strtod for conversion
     of C doubles to and from strings, is derived from the file of the same name by
     David M. Gay, currently available from http://www.netlib.org/fp/. The original
     file, as retrieved on March 16, 2009, contains the following copyright and
     licensing notice:

     /****************************************************************
      *
      * The author of this software is David M. Gay.
      *
      * Copyright (c) 1991, 2000, 2001 by Lucent Technologies.
      *
      * Permission to use, copy, modify, and distribute this software for
      * any purpose without fee is hereby granted, provided that this entire
      * notice is included in all copies of any software which is or
      * includes a copy or modification of this software and in all copies
      * of the supporting documentation for such software.
      *
      * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR
      * IMPLIED WARRANTY.  IN PARTICULAR, NEITHER THE AUTHOR NOR LUCENT
      * MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE
      * MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR
      * PURPOSE.
      *
      ***************************************************************/


File: manual.info,  Node: license-redhat-spec-file,  Next: license-regex,  Prev: license-python,  Up: licenses-third-party

A.40 Red HAT RPM Spec File License
==================================

The following software may be included in this product:

Red Hat RPM Spec File

     You are receiving a copy of the Red Hat spec file. The terms of the Oracle
     license do NOT apply to the Red Hat spec file; it is licensed under the
     following license, separately from the Oracle programs you receive.

                         GNU GENERAL PUBLIC LICENSE
                            Version 2, June 1991

     Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
     51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.
     [for rest of text, see following link]

This component is licensed under *Note license-gnu-gpl-2-0::


File: manual.info,  Node: license-regex,  Next: license-us-secure-hash,  Prev: license-redhat-spec-file,  Up: licenses-third-party

A.41 RegEX-Spencer Library License
==================================

The following software may be included in this product: Henry Spencer's
Regular-Expression Library (RegEX-Spencer)

     Copyright 1992, 1993, 1994 Henry Spencer.  All rights reserved.
     This software is not subject to any license of the American Telephone
     and Telegraph Company or of the Regents of the University of California.

     Permission is granted to anyone to use this software for any purpose on
     any computer system, and to alter it and redistribute it, subject
     to the following restrictions:

     1. The author is not responsible for the consequences of use of this
        software, no matter how awful, even if they arise from flaws in it.

     2. The origin of this software must not be misrepresented, either by
        explicit claim or by omission.  Since few users ever read sources,
        credits must appear in the documentation.

     3. Altered versions must be plainly marked as such, and must not be
        misrepresented as being the original software.  Since few users
        ever read sources, credits must appear in the documentation.

     4. This notice may not be removed or altered.


File: manual.info,  Node: license-us-secure-hash,  Next: license-libstring,  Prev: license-regex,  Up: licenses-third-party

A.42 RFC 3174 - US Secure Hash Algorithm 1 (SHA1) License
=========================================================

The following software may be included in this product:

RFC 3174 - US Secure Hash Algorithm 1 (SHA1)

     RFC 3174 - US Secure Hash Algorithm 1 (SHA1)

     Copyright (C) The Internet Society (2001).  All Rights Reserved.

     This document and translations of it may be copied and furnished to
     others, and derivative works that comment on or otherwise explain it
     or assist in its implementation may be prepared, copied, published
     and distributed, in whole or in part, without restriction of any
     kind, provided that the above copyright notice and this paragraph are
     included on all such copies and derivative works.  However, this
     document itself may not be modified in any way, such as by removing
     the copyright notice or references to the Internet Society or other
     Internet organizations, except as needed for the purpose of
     developing Internet standards in which case the procedures for
     copyrights defined in the Internet Standards process must be
     followed, or as required to translate it into languages other than
     English.

     The limited permissions granted above are perpetual and will not be
     revoked by the Internet Society or its successors or assigns.

     This document and the information contained herein is provided on an
     "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
     TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
     BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
     HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
     MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

     Acknowledgement
     Funding for the RFC Editor function is currently provided by the
     Internet Society.


File: manual.info,  Node: license-libstring,  Next: license-sha1-in-c,  Prev: license-us-secure-hash,  Up: licenses-third-party

A.43 Richard A. O'Keefe String Library License
==============================================

The following software may be included in this product:

Richard A. O'Keefe String Library

     The Richard O'Keefe String Library is subject to the following notice:

     These files are in the public domain.  This includes getopt.c, which
     is the work of Henry Spencer, University of Toronto Zoology, who
     says of it "None of this software is derived from Bell software. I
     had no access to the source for Bell's versions at the time I wrote
     it.  This software is hereby explicitly placed in the public domain.
     It may be used for any purpose on any machine by anyone." I would
     greatly prefer it if *my* material received no military use.

     The t_ctype.h file is subject to the following notice:

     Copyright (C) 1998, 1999 by Pruet Boonma, all rights reserved.
     Copyright (C) 1998 by Theppitak Karoonboonyanan, all rights reserved.

       Permission to use, copy, modify, distribute and sell this software and its
     documentation for any purpose is hereby granted without fee, provided that the above
     copyright notice appear in all copies.

       Smaphan Raruenrom and Pruet Boonma makes no representations about
     the suitability of this software for any purpose. It is provided
     "as is" without express or implied warranty.


File: manual.info,  Node: license-sha1-in-c,  Next: license-slf4j,  Prev: license-libstring,  Up: licenses-third-party

A.44 SHA-1 in C License
=======================

The following software may be included in this product:

SHA-1 in C

     SHA-1 in C
     By Steve Reid <steve@edmweb.com>
     100% Public Domain


File: manual.info,  Node: license-slf4j,  Next: license-zlib,  Prev: license-sha1-in-c,  Up: licenses-third-party

A.45 Simple Logging Facade for Java (SLF4J) License
===================================================

The following software may be included in this product:

     Simple Logging Facade for Java (SLF4J)

     Copyright (c) 2004-2008 QOS.ch
     All rights reserved.

     Permission is hereby granted, free of charge,
     to any person obtaining a copy of this software
     and associated documentation files (the "Software"),
     to deal in the Software without restriction, including
     without limitation the rights to use, copy, modify,
     merge, publish, distribute, sublicense, and/or sell
     copies of the Software, and to permit persons to whom
     the Software is furnished to do so, subject to the
     following conditions:

     The above copyright notice and this permission notice
     shall be included in all copies or substantial portions
     of the Software.

     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY
     OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
     LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
     FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO
     EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE
     FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
     AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
     OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
     OR OTHER DEALINGS IN THE SOFTWARE.


File: manual.info,  Node: license-zlib,  Next: license-zlib-net,  Prev: license-slf4j,  Up: licenses-third-party

A.46 `zlib' License
===================

The following software may be included in this product:

zlib

Oracle gratefully acknowledges the contributions of Jean-loup Gailly
and Mark Adler in creating the zlib general purpose compression library
which is used in this product.

     zlib.h -- interface of the 'zlib' general purpose compression library
     Copyright (C) 1995-2004 Jean-loup Gailly and Mark Adler

     zlib.h -- interface of the 'zlib' general purpose compression library
     version 1.2.3, July 18th, 2005
     Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler

     zlib.h -- interface of the 'zlib' general purpose compression library
     version 1.2.5, April 19th, 2010
     Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler

     This software is provided 'as-is', without any express or implied warranty.
     In no event will the authors be held liable for any damages arising from the
     use of this software. Permission is granted to anyone to use this software
     for any purpose,including commercial applications, and to alter it and
     redistribute it freely, subject to the following restrictions:

     1. The origin of this software must not be misrepresented; you must not
        claim that you wrote the original software. If you use this software
        in a product, an acknowledgment in the product documentation would
        be appreciated but is not required.
     2. Altered source versions must be plainly marked as such, and must not
        be misrepresented as being the original software.
     3. This notice may not be removed or altered from any source distribution.

     Jean-loup Gailly jloup@gzip.org
     Mark Adler madler@alumni.caltech.edu


File: manual.info,  Node: license-zlib-net,  Prev: license-zlib,  Up: licenses-third-party

A.47 ZLIB.NET License
=====================

The following software may be included in this product:

     ZLIB.NET

     Copyright (c) 2006-2007, ComponentAce
     http://www.componentace.com
     All rights reserved.

     Redistribution and use in source and binary forms,
     with or without modification, are permitted provided
     that the following conditions are met:

     * Redistributions of source code must retain the
       above copyright notice, this list of conditions and
       the following disclaimer.
     * Redistributions in binary form must reproduce the
       above copyright notice, this list of conditions and
       the following disclaimer in the documentation and/or
       other materials provided with the distribution.
     * Neither the name of ComponentAce nor the names of its
       contributors may be used to endorse or promote products
       derived from this software without specific prior written
       permission.

     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
     BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
     STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
     ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.


File: manual.info,  Node: faqs,  Next: error-handling,  Prev: licenses-third-party,  Up: Top

Appendix B MySQL 5.5 Frequently Asked Questions
***********************************************

* Menu:

* faqs-general::                 MySQL 5.5 FAQ: General
* faqs-storage-engines::         MySQL 5.5 FAQ: Storage Engines
* faqs-sql-modes::               MySQL 5.5 FAQ: Server SQL Mode
* faqs-stored-procs::            MySQL 5.5 FAQ: Stored Procedures and Functions
* faqs-triggers::                MySQL 5.5 FAQ: Triggers
* faqs-views::                   MySQL 5.5 FAQ: Views
* faqs-information-schema::      MySQL 5.5 FAQ: `INFORMATION_SCHEMA'
* faqs-migration::               MySQL 5.5 FAQ: Migration
* faqs-security::                MySQL 5.5 FAQ: Security
* faqs-mysql-cluster::           MySQL FAQ: MySQL 5.5 and MySQL Cluster
* faqs-cjk::                     MySQL 5.5 FAQ: MySQL Chinese, Japanese, and Korean Character Sets
* faqs-connectors-apis::         MySQL 5.5 FAQ: Connectors & APIs
* faqs-replication::             MySQL 5.5 FAQ: Replication
* faqs-thread-pool::             MySQL 5.5 FAQ: MySQL Enterprise Scalability Thread Pool


File: manual.info,  Node: faqs-general,  Next: faqs-storage-engines,  Prev: faqs,  Up: faqs

B.1 MySQL 5.5 FAQ: General
==========================

*Questions*
   * B.1.1: Which version of MySQL is production-ready (GA)?

   * B.1.2: What is the state of development (non-GA) versions?

   * B.1.3: Can MySQL 5.5 do subqueries?

   * B.1.4: Can MySQL 5.5 perform multiple-table inserts, updates, and
     deletes?

   * B.1.5: Does MySQL 5.5 have a Query Cache? Does it work on Server,
     Instance or Database?

   * B.1.6: Does MySQL 5.5 have Sequences?

   * B.1.7: Does MySQL 5.5 have a `NOW()' function with fractions of
     seconds?

   * B.1.8: Does MySQL 5.5 work with multi-core processors?

   * B.1.9: Why do I see multiple processes for `mysqld'?

   * B.1.10: Have there been there any improvements in error reporting
     when foreign keys fail? Does MySQL now report which column and
     reference failed?

   * B.1.11: Can MySQL 5.5 perform ACID transactions?

*Questions and Answers* *B.1.1: ** Which version of MySQL is
production-ready (GA)?  *

MySQL 5.6, MySQL 5.5, MySQL 5.1, and MySQL 5.0 are supported for
production use.

MySQL 5.6 achieved General Availability (GA) status with MySQL 5.6.10,
which was released for production use on 5 February 2013.

MySQL 5.5 achieved General Availability (GA) status with MySQL 5.5.8,
which was released for production use on 3 December 2010.

MySQL 5.1 achieved General Availability (GA) status with MySQL 5.1.30,
which was released for production use on 14 November 2008.

MySQL 5.0 achieved General Availability (GA) status with MySQL 5.0.15,
which was released for production use on 19 October 2005. Note that
active development for MySQL 5.0 has ended.

*B.1.2: ** What is the state of development (non-GA) versions?  *

MySQL follows a milestone release model that introduces
pre-production-quality features and stabilizes them to release quality
(see `http://dev.mysql.com/doc/mysql-development-cycle/en/index.html').
This process then repeats, so releases cycle between pre-production and
release quality status. Please check the change logs to identify the
status of a given release.

MySQL 5.4 was a development series. Work on this series has ceased.

MySQL 5.7 is being actively developed using the milestone release
methodology described above.

MySQL 6.0 was a development series. Work on this series has ceased.

*B.1.3: ** Can MySQL 5.5 do subqueries?  *

Yes. See *Note subqueries::.

*B.1.4: ** Can MySQL 5.5 perform multiple-table inserts, updates, and
deletes?  *

Yes. For the syntax required to perform multiple-table updates, see
*Note update::; for that required to perform multiple-table deletes,
see *Note delete::.

A multiple-table insert can be accomplished using a trigger whose `FOR
EACH ROW' clause contains multiple *Note `INSERT': insert. statements
within a `BEGIN ... END' block. See *Note triggers::.

*B.1.5: ** Does MySQL 5.5 have a Query Cache? Does it work on Server,
Instance or Database?  *

Yes. The query cache operates on the server level, caching complete
result sets matched with the original query string. If an exactly
identical query is made (which often happens, particularly in web
applications), no parsing or execution is necessary; the result is sent
directly from the cache. Various tuning options are available. See
*Note query-cache::.

*B.1.6: ** Does MySQL 5.5 have Sequences?  *

No. However, MySQL has an `AUTO_INCREMENT' system, which in MySQL 5.5
can also handle inserts in a multi-master replication setup. With the
`auto_increment_increment' and `auto_increment_offset' system
variables, you can set each server to generate auto-increment values
that don't conflict with other servers. The `auto_increment_increment'
value should be greater than the number of servers, and each server
should have a unique offset.

*B.1.7: ** Does MySQL 5.5 have a `NOW()' function with fractions of
seconds?  *

No. This is on the MySQL roadmap as a `rolling feature'. This means
that it is not a flagship feature, but will be implemented, development
time permitting. Specific customer demand may change this scheduling.

However, MySQL does parse time strings with a fractional component. See
*Note time::.

*B.1.8: ** Does MySQL 5.5 work with multi-core processors?  *

Yes. MySQL is fully multi-threaded, and will make use of multiple CPUs,
provided that the operating system supports them.

*B.1.9: ** Why do I see multiple processes for `mysqld'?  *

When using LinuxThreads, you should see a minimum of three *Note
`mysqld': mysqld. processes running. These are in fact threads. There
is one thread for the LinuxThreads manager, one thread to handle
connections, and one thread to handle alarms and signals.

*B.1.10: ** Have there been there any improvements in error reporting
when foreign keys fail? Does MySQL now report which column and
reference failed?  *

The foreign key support in `InnoDB' has seen improvements in each major
version of MySQL. Foreign key support generic to all storage engines is
scheduled for MySQL 6.x; this should resolve any inadequacies in the
current storage engine specific implementation.

*B.1.11: ** Can MySQL 5.5 perform ACID transactions?  *

Yes. All current MySQL versions support transactions. The `InnoDB'
storage engine offers full ACID transactions with row-level locking,
multi-versioning, nonlocking repeatable reads, and all four SQL
standard isolation levels.

The *Note `NDB': mysql-cluster. storage engine supports the `READ
COMMITTED' transaction isolation level only.


File: manual.info,  Node: faqs-storage-engines,  Next: faqs-sql-modes,  Prev: faqs-general,  Up: faqs

B.2 MySQL 5.5 FAQ: Storage Engines
==================================

*Questions*
   * B.2.1: Where can I obtain complete documentation for MySQL storage
     engines?

   * B.2.2: Are there any new storage engines in MySQL 5.5?

   * B.2.3: Have any storage engines been removed in MySQL 5.5?

   * B.2.4: What are the unique benefits of the `ARCHIVE' storage
     engine?

   * B.2.5: Do the new features in MySQL 5.5 apply to all storage
     engines?

*Questions and Answers* *B.2.1: ** Where can I obtain complete
documentation for MySQL storage engines?  *

See *Note storage-engines::. That chapter contains information about
all MySQL storage engines except for the *Note `NDB': mysql-cluster.
storage engine used for MySQL Cluster; *Note `NDB': mysql-cluster. is
covered in *Note mysql-cluster::.

*B.2.2: ** Are there any new storage engines in MySQL 5.5?  *

The features from the optional `InnoDB Plugin' from MySQL 5.1 are
folded into the built-in `InnoDB' storage engine, so you can take
advantage of features such as the Barracuda file format, `InnoDB' table
compression, and the new configuration options for performance. See
*Note innodb-5-5:: for details.  `InnoDB' also becomes the default
storage engine for new tables. See *Note innodb-default-se:: for
details.

*B.2.3: ** Have any storage engines been removed in MySQL 5.5?  *

No.

*B.2.4: ** What are the unique benefits of the `ARCHIVE' storage engine?
*

The `ARCHIVE' storage engine is ideally suited for storing large
amounts of data without indexes; it has a very small footprint, and
performs selects using table scans. See *Note archive-storage-engine::,
for details.

*B.2.5: ** Do the new features in MySQL 5.5 apply to all storage
engines?  *

The general new features such as views, stored procedures, triggers,
`INFORMATION_SCHEMA', precision math (*Note `DECIMAL':
fixed-point-types. column type), and the *Note `BIT': bit-type. column
type, apply to all storage engines. There are also additions and
changes for specific storage engines.


File: manual.info,  Node: faqs-sql-modes,  Next: faqs-stored-procs,  Prev: faqs-storage-engines,  Up: faqs

B.3 MySQL 5.5 FAQ: Server SQL Mode
==================================

*Questions*
   * B.3.1: What are server SQL modes?

   * B.3.2: How many server SQL modes are there?

   * B.3.3: How do you determine the server SQL mode?

   * B.3.4: Is the mode dependent on the database or connection?

   * B.3.5: Can the rules for strict mode be extended?

   * B.3.6: Does strict mode impact performance?

   * B.3.7: What is the default server SQL mode when My SQL 5.5 is
     installed?

*Questions and Answers* *B.3.1: ** What are server SQL modes?  *

Server SQL modes define what SQL syntax MySQL should support and what
kind of data validation checks it should perform. This makes it easier
to use MySQL in different environments and to use MySQL together with
other database servers. The MySQL Server apply these modes individually
to different clients. For more information, see *Note server-sql-mode::.

*B.3.2: ** How many server SQL modes are there?  *

Each mode can be independently switched on and off. See *Note
server-sql-mode::, for a complete list of available modes.

*B.3.3: ** How do you determine the server SQL mode?  *

You can set the default SQL mode (for *Note `mysqld': mysqld.  startup)
with the `--sql-mode' option. Using the statement *Note `SET
[GLOBAL|SESSION] sql_mode='MODES'': set-statement, you can change the
settings from within a connection, either locally to the connection, or
to take effect globally. You can retrieve the current mode by issuing a
`SELECT @@sql_mode' statement.

*B.3.4: ** Is the mode dependent on the database or connection?  *

A mode is not linked to a particular database. Modes can be set locally
to the session (connection), or globally for the server.  you can
change these settings using *Note `SET [GLOBAL|SESSION]
sql_mode='MODES'': set-statement.

*B.3.5: ** Can the rules for strict mode be extended?  *

When we refer to _strict mode_, we mean a mode where at least one of
the modes `TRADITIONAL', `STRICT_TRANS_TABLES', or `STRICT_ALL_TABLES'
is enabled.  Options can be combined, so you can add restrictions to a
mode.  See *Note server-sql-mode::, for more information.

*B.3.6: ** Does strict mode impact performance?  *

The intensive validation of input data that some settings requires more
time than if the validation is not done. While the performance impact
is not that great, if you do not require such validation (perhaps your
application already handles all of this), then MySQL gives you the
option of leaving strict mode disabled. However--if you do require
it--strict mode can provide such validation.

*B.3.7: ** What is the default server SQL mode when My SQL 5.5 is
installed?  *

By default, no special modes are enabled. See *Note server-sql-mode::,
for information about all available modes and MySQL's default behavior.


File: manual.info,  Node: faqs-stored-procs,  Next: faqs-triggers,  Prev: faqs-sql-modes,  Up: faqs

B.4 MySQL 5.5 FAQ: Stored Procedures and Functions
==================================================

*Questions*
   * B.4.1: Does MySQL 5.5 support stored procedures and functions?

   * B.4.2: Where can I find documentation for MySQL stored procedures
     and stored functions?

   * B.4.3: Is there a discussion forum for MySQL stored procedures?

   * B.4.4: Where can I find the ANSI SQL 2003 specification for stored
     procedures?

   * B.4.5: How do you manage stored routines?

   * B.4.6: Is there a way to view all stored procedures and stored
     functions in a given database?

   * B.4.7: Where are stored procedures stored?

   * B.4.8: Is it possible to group stored procedures or stored
     functions into packages?

   * B.4.9: Can a stored procedure call another stored procedure?

   * B.4.10: Can a stored procedure call a trigger?

   * B.4.11: Can a stored procedure access tables?

   * B.4.12: Do stored procedures have a statement for raising
     application errors?

   * B.4.13: Do stored procedures provide exception handling?

   * B.4.14: Can MySQL 5.5 stored routines return result sets?

   * B.4.15: Is `WITH RECOMPILE' supported for stored procedures?

   * B.4.16: Is there a MySQL equivalent to using `mod_plsql' as a
     gateway on Apache to talk directly to a stored procedure in the
     database?

   * B.4.17: Can I pass an array as input to a stored procedure?

   * B.4.18: Can I pass a cursor as an `IN' parameter to a stored
     procedure?

   * B.4.19: Can I return a cursor as an `OUT' parameter from a stored
     procedure?

   * B.4.20: Can I print out a variable's value within a stored routine
     for debugging purposes?

   * B.4.21: Can I commit or roll back transactions inside a stored
     procedure?

   * B.4.22: Do MySQL 5.5 stored procedures and functions work with
     replication?

   * B.4.23: Are stored procedures and functions created on a master
     server replicated to a slave?

   * B.4.24: How are actions that take place inside stored procedures
     and functions replicated?

   * B.4.25: Are there special security requirements for using stored
     procedures and functions together with replication?

   * B.4.26: What limitations exist for replicating stored procedure and
     function actions?

   * B.4.27: Do the preceding limitations affect MySQL's ability to do
     point-in-time recovery?

   * B.4.28: What is being done to correct the aforementioned
     limitations?

*Questions and Answers* *B.4.1: ** Does MySQL 5.5 support stored
procedures and functions?  *

Yes. MySQL 5.5 supports two types of stored routines--stored procedures
and stored functions.

*B.4.2: ** Where can I find documentation for MySQL stored procedures
and stored functions?  *

See *Note stored-routines::.

*B.4.3: ** Is there a discussion forum for MySQL stored procedures?  *

Yes. See http://forums.mysql.com/list.php?98
(http://forums.mysql.com/list.php?98).

*B.4.4: ** Where can I find the ANSI SQL 2003 specification for stored
procedures?  *

Unfortunately, the official specifications are not freely available
(ANSI makes them available for purchase). However, there are
books--such as `SQL-99 Complete, Really' by Peter Gulutzan and Trudy
Pelzer--which give a comprehensive overview of the standard, including
coverage of stored procedures.

*B.4.5: ** How do you manage stored routines?  *

It is always good practice to use a clear naming scheme for your stored
routines. You can manage stored procedures with `CREATE
[FUNCTION|PROCEDURE]', `ALTER [FUNCTION|PROCEDURE]', `DROP
[FUNCTION|PROCEDURE]', and `SHOW CREATE [FUNCTION|PROCEDURE]'. You can
obtain information about existing stored procedures using the *Note
`ROUTINES': routines-table. table in the `INFORMATION_SCHEMA' database
(see *Note routines-table::).

*B.4.6: ** Is there a way to view all stored procedures and stored
functions in a given database?  *

Yes. For a database named DBNAME, use this query on the *Note
`INFORMATION_SCHEMA.ROUTINES': routines-table. table:

     SELECT ROUTINE_TYPE, ROUTINE_NAME
         FROM INFORMATION_SCHEMA.ROUTINES
         WHERE ROUTINE_SCHEMA='DBNAME';

For more information, see *Note routines-table::.

The body of a stored routine can be viewed using *Note `SHOW CREATE
FUNCTION': show-create-function. (for a stored function) or *Note `SHOW
CREATE PROCEDURE': show-create-procedure. (for a stored procedure). See
*Note show-create-procedure::, for more information.

*B.4.7: ** Where are stored procedures stored?  *

In the `proc' table of the `mysql' system database. However, you should
not access the tables in the system database directly. Instead, use
*Note `SHOW CREATE FUNCTION': show-create-function. to obtain
information about stored functions, and *Note `SHOW CREATE PROCEDURE':
show-create-procedure. to obtain information about stored procedures.
See *Note show-create-procedure::, for more information about these
statements.

You can also query the *Note `ROUTINES': routines-table.  table in the
`INFORMATION_SCHEMA' database--see *Note routines-table::, for
information about this table.

*B.4.8: ** Is it possible to group stored procedures or stored functions
into packages?  *

No. This is not supported in MySQL 5.5.

*B.4.9: ** Can a stored procedure call another stored procedure?  *

Yes.

*B.4.10: ** Can a stored procedure call a trigger?  *

A stored procedure can execute an SQL statement, such as an *Note
`UPDATE': update, that causes a trigger to activate.

*B.4.11: ** Can a stored procedure access tables?  *

Yes. A stored procedure can access one or more tables as required.

*B.4.12: ** Do stored procedures have a statement for raising
application errors?  *

Yes. MySQL 5.5 implements the SQL standard `SIGNAL' and `RESIGNAL'
statements. See *Note condition-handling::.

*B.4.13: ** Do stored procedures provide exception handling?  *

MySQL implements *Note `HANDLER': handler.  definitions according to
the SQL standard. See *Note declare-handler::, for details.

*B.4.14: ** Can MySQL 5.5 stored routines return result sets?  *

_Stored procedures_ can, but stored functions cannot. If you perform an
ordinary *Note `SELECT': select. inside a stored procedure, the result
set is returned directly to the client. You need to use the MySQL 4.1
(or above) client/server protocol for this to work. This means
that--for instance--in PHP, you need to use the `mysqli' extension
rather than the old `mysql' extension.

*B.4.15: ** Is `WITH RECOMPILE' supported for stored procedures?  *

Not in MySQL 5.5.

*B.4.16: ** Is there a MySQL equivalent to using `mod_plsql' as a
gateway on Apache to talk directly to a stored procedure in the
database?  *

There is no equivalent in MySQL 5.5.

*B.4.17: ** Can I pass an array as input to a stored procedure?  *

Not in MySQL 5.5.

*B.4.18: ** Can I pass a cursor as an `IN' parameter to a stored
procedure?  *

In MySQL 5.5, cursors are available inside stored procedures only.

*B.4.19: ** Can I return a cursor as an `OUT' parameter from a stored
procedure?  *

In MySQL 5.5, cursors are available inside stored procedures only.
However, if you do not open a cursor on a *Note `SELECT': select, the
result will be sent directly to the client. You can also `SELECT INTO'
variables. See *Note select::.

*B.4.20: ** Can I print out a variable's value within a stored routine
for debugging purposes?  *

Yes, you can do this in a _stored procedure_, but not in a stored
function. If you perform an ordinary *Note `SELECT': select. inside a
stored procedure, the result set is returned directly to the client.
You will need to use the MySQL 4.1 (or above) client/server protocol
for this to work. This means that--for instance--in PHP, you need to
use the `mysqli' extension rather than the old `mysql' extension.

*B.4.21: ** Can I commit or roll back transactions inside a stored
procedure?  *

Yes. However, you cannot perform transactional operations within a
stored function.

*B.4.22: ** Do MySQL 5.5 stored procedures and functions work with
replication?  *

Yes, standard actions carried out in stored procedures and functions
are replicated from a master MySQL server to a slave server. There are
a few limitations that are described in detail in *Note
stored-programs-logging::.

*B.4.23: ** Are stored procedures and functions created on a master
server replicated to a slave?  *

Yes, creation of stored procedures and functions carried out through
normal DDL statements on a master server are replicated to a slave, so
the objects will exist on both servers.  `ALTER' and `DROP' statements
for stored procedures and functions are also replicated.

*B.4.24: ** How are actions that take place inside stored procedures and
functions replicated?  *

MySQL records each DML event that occurs in a stored procedure and
replicates those individual actions to a slave server. The actual calls
made to execute stored procedures are not replicated.

Stored functions that change data are logged as function invocations,
not as the DML events that occur inside each function.

*B.4.25: ** Are there special security requirements for using stored
procedures and functions together with replication?  *

Yes. Because a slave server has authority to execute any statement read
from a master's binary log, special security constraints exist for
using stored functions with replication.  If replication or binary
logging in general (for the purpose of point-in-time recovery) is
active, then MySQL DBAs have two security options open to them:

  1. Any user wishing to create stored functions must be granted the
     `SUPER' privilege.

  2. Alternatively, a DBA can set the `log_bin_trust_function_creators'
     system variable to 1, which enables anyone with the standard
     `CREATE ROUTINE' privilege to create stored functions.

*B.4.26: ** What limitations exist for replicating stored procedure and
function actions?  *

Nondeterministic (random) or time-based actions embedded in stored
procedures may not replicate properly. By their very nature, randomly
produced results are not predictable and cannot be exactly reproduced,
and therefore, random actions replicated to a slave will not mirror
those performed on a master. Note that declaring stored functions to be
`DETERMINISTIC' or setting the `log_bin_trust_function_creators' system
variable to 0 will not allow random-valued operations to be invoked.

In addition, time-based actions cannot be reproduced on a slave because
the timing of such actions in a stored procedure is not reproducible
through the binary log used for replication. It records only DML events
and does not factor in timing constraints.

Finally, nontransactional tables for which errors occur during large
DML actions (such as bulk inserts) may experience replication issues in
that a master may be partially updated from DML activity, but no
updates are done to the slave because of the errors that occurred. A
workaround is for a function's DML actions to be carried out with the
`IGNORE' keyword so that updates on the master that cause errors are
ignored and updates that do not cause errors are replicated to the
slave.

*B.4.27: ** Do the preceding limitations affect MySQL's ability to do
point-in-time recovery?  *

The same limitations that affect replication do affect point-in-time
recovery.

*B.4.28: ** What is being done to correct the aforementioned
limitations?  *

You can choose either statement-based replication or row-based
replication. The original replication implementation is based on
statement-based binary logging. Row-based binary logging resolves the
limitations mentioned earlier.

_Mixed_ replication is also available (by starting the server with
`--binlog-format=mixed'). This hybrid, `smart' form of replication
`knows' whether statement-level replication can safely be used, or
row-level replication is required.

For additional information, see *Note replication-formats::.


File: manual.info,  Node: faqs-triggers,  Next: faqs-views,  Prev: faqs-stored-procs,  Up: faqs

B.5 MySQL 5.5 FAQ: Triggers
===========================

*Questions*
   * B.5.1: Where can I find the documentation for MySQL 5.5 triggers?

   * B.5.2: Is there a discussion forum for MySQL Triggers?

   * B.5.3: Does MySQL 5.5 have statement-level or row-level triggers?

   * B.5.4: Are there any default triggers?

   * B.5.5: How are triggers managed in MySQL?

   * B.5.6: Is there a way to view all triggers in a given database?

   * B.5.7: Where are triggers stored?

   * B.5.8: Can a trigger call a stored procedure?

   * B.5.9: Can triggers access tables?

   * B.5.10: Can a table have multiple triggers with the same trigger
     event and action time?

   * B.5.11: Can triggers call an external application through a UDF?

   * B.5.12: Is it possible for a trigger to update tables on a remote
     server?

   * B.5.13: Do triggers work with replication?

   * B.5.14: How are actions carried out through triggers on a master
     replicated to a slave?

*Questions and Answers* *B.5.1: ** Where can I find the documentation
for MySQL 5.5 triggers?  *

See *Note triggers::.

*B.5.2: ** Is there a discussion forum for MySQL Triggers?  *

Yes. It is available at `http://forums.mysql.com/list.php?99'.

*B.5.3: ** Does MySQL 5.5 have statement-level or row-level triggers?  *

In MySQL 5.5, all triggers are `FOR EACH ROW'--that is, the trigger is
activated for each row that is inserted, updated, or deleted. MySQL 5.5
does not support triggers using `FOR EACH STATEMENT'.

*B.5.4: ** Are there any default triggers?  *

Not explicitly. MySQL does have specific special behavior for some
*Note `TIMESTAMP': datetime. columns, as well as for columns which are
defined using `AUTO_INCREMENT'.

*B.5.5: ** How are triggers managed in MySQL?  *

In MySQL 5.5, triggers can be created using the *Note `CREATE TRIGGER':
create-trigger. statement, and dropped using *Note `DROP TRIGGER':
drop-trigger. See *Note create-trigger::, and *Note drop-trigger::, for
more about these statements.

Information about triggers can be obtained by querying the *Note
`INFORMATION_SCHEMA.TRIGGERS': triggers-table. table.  See *Note
triggers-table::.

*B.5.6: ** Is there a way to view all triggers in a given database?  *

Yes. You can obtain a listing of all triggers defined on database
`dbname' using a query on the *Note `INFORMATION_SCHEMA.TRIGGERS':
triggers-table. table such as the one shown here:

     SELECT TRIGGER_NAME, EVENT_MANIPULATION, EVENT_OBJECT_TABLE, ACTION_STATEMENT
         FROM INFORMATION_SCHEMA.TRIGGERS
         WHERE TRIGGER_SCHEMA='DBNAME';

For more information about this table, see *Note triggers-table::.

You can also use the *Note `SHOW TRIGGERS': show-triggers. statement,
which is specific to MySQL. See *Note show-triggers::.

*B.5.7: ** Where are triggers stored?  *

Triggers for a table are currently stored in `.TRG' files, with one
such file one per table.

*B.5.8: ** Can a trigger call a stored procedure?  *

Yes.

*B.5.9: ** Can triggers access tables?  *

A trigger can access both old and new data in its own table. A trigger
can also affect other tables, but it is not permitted to modify a table
that is already being used (for reading or writing) by the statement
that invoked the function or trigger.

*B.5.10: ** Can a table have multiple triggers with the same trigger
event and action time?  *

In MySQL 5.5, there cannot be multiple triggers for a given table that
have the same trigger event and action time.  For example, you cannot
have two `BEFORE UPDATE' triggers for a table. This limitation is lifted
in MySQL 5.7.

*B.5.11: ** Can triggers call an external application through a UDF?  *

Yes. For example, a trigger could invoke the `sys_exec()' UDF.

*B.5.12: ** Is it possible for a trigger to update tables on a remote
server?  *

Yes. A table on a remote server could be updated using the `FEDERATED'
storage engine. (See *Note federated-storage-engine::).

*B.5.13: ** Do triggers work with replication?  *

Yes. However, the way in which they work depends whether you are using
MySQL's `classic' statement-based replication available in all versions
of MySQL, or the row-based replication format introduced in MySQL 5.1.

When using statement-based replication, triggers on the slave are
executed by statements that are executed on the master (and replicated
to the slave).

When using row-based replication, triggers are not executed on the
slave due to statements that were run on the master and then replicated
to the slave. Instead, when using row-based replication, the changes
caused by executing the trigger on the master are applied on the slave.

For more information, see *Note replication-features-triggers::.

*B.5.14: ** How are actions carried out through triggers on a master
replicated to a slave?  *

Again, this depends on whether you are using statement-based or
row-based replication.

Statement-based replication

First, the triggers that exist on a master must be re-created on the
slave server. Once this is done, the replication flow works as any
other standard DML statement that participates in replication. For
example, consider a table `EMP' that has an `AFTER' insert trigger,
which exists on a master MySQL server. The same `EMP' table and `AFTER'
insert trigger exist on the slave server as well. The replication flow
would be:

  1. An *Note `INSERT': insert. statement is made to `EMP'.

  2. The `AFTER' trigger on `EMP' activates.

  3. The *Note `INSERT': insert. statement is written to the binary log.

  4. The replication slave picks up the *Note `INSERT': insert.
     statement to `EMP' and executes it.

  5. The `AFTER' trigger on `EMP' that exists on the slave activates.

Row-based replication

When you use row-based replication, the changes caused by executing the
trigger on the master are applied on the slave.  However, the triggers
themselves are not actually executed on the slave under row-based
replication. This is because, if both the master and the slave applied
the changes from the master and--in addition--the trigger causing these
changes were applied on the slave, the changes would in effect be
applied twice on the slave, leading to different data on the master and
the slave.

In most cases, the outcome is the same for both row-based and
statement-based replication. However, if you use different triggers on
the master and slave, you cannot use row-based replication. (This is
because the row-based format replicates the changes made by triggers
executing on the master to the slaves, rather than the statements that
caused the triggers to execute, and the corresponding triggers on the
slave are not executed.) Instead, any statements causing such triggers
to be executed must be replicated using statement-based replication.

For more information, see *Note replication-features-triggers::.


File: manual.info,  Node: faqs-views,  Next: faqs-information-schema,  Prev: faqs-triggers,  Up: faqs

B.6 MySQL 5.5 FAQ: Views
========================

*Questions*
   * B.6.1: Where can I find documentation covering MySQL Views?

   * B.6.2: Is there a discussion forum for MySQL Views?

   * B.6.3: What happens to a view if an underlying table is dropped or
     renamed?

   * B.6.4: Does MySQL 5.5 have table snapshots?

   * B.6.5: Does MySQL 5.5 have materialized views?

   * B.6.6: Can you insert into views that are based on joins?

*Questions and Answers* *B.6.1: ** Where can I find documentation
covering MySQL Views?  *

See *Note views::.

*B.6.2: ** Is there a discussion forum for MySQL Views?  *

Yes. See http://forums.mysql.com/list.php?100
(http://forums.mysql.com/list.php?100)

*B.6.3: ** What happens to a view if an underlying table is dropped or
renamed?  *

After a view has been created, it is possible to drop or alter a table
or view to which the definition refers. To check a view definition for
problems of this kind, use the *Note `CHECK TABLE': check-table.
statement. (See *Note check-table::.)

*B.6.4: ** Does MySQL 5.5 have table snapshots?  *

No.

*B.6.5: ** Does MySQL 5.5 have materialized views?  *

No.

*B.6.6: ** Can you insert into views that are based on joins?  *

It is possible, provided that your *Note `INSERT': insert. statement
has a column list that makes it clear there is only one table involved.

You _cannot_ insert into multiple tables with a single insert on a view.


File: manual.info,  Node: faqs-information-schema,  Next: faqs-migration,  Prev: faqs-views,  Up: faqs

B.7 MySQL 5.5 FAQ: `INFORMATION_SCHEMA'
=======================================

*Questions*
   * B.7.1: Where can I find documentation for the MySQL
     `INFORMATION_SCHEMA' database?

   * B.7.2: Is there a discussion forum for `INFORMATION_SCHEMA'?

   * B.7.3: Where can I find the ANSI SQL 2003 specification for
     `INFORMATION_SCHEMA'?

   * B.7.4: What is the difference between the Oracle Data Dictionary
     and MySQL's `INFORMATION_SCHEMA'?

   * B.7.5: Can I add to or otherwise modify the tables found in the
     `INFORMATION_SCHEMA' database?

*Questions and Answers* *B.7.1: ** Where can I find documentation for
the MySQL `INFORMATION_SCHEMA' database?  *

See *Note information-schema::

*B.7.2: ** Is there a discussion forum for `INFORMATION_SCHEMA'?  *

See http://forums.mysql.com/list.php?101
(http://forums.mysql.com/list.php?101).

*B.7.3: ** Where can I find the ANSI SQL 2003 specification for
`INFORMATION_SCHEMA'?  *

Unfortunately, the official specifications are not freely available.
(ANSI makes them available for purchase.) However, there are books
available--such as `SQL-99 Complete, Really' by Peter Gulutzan and Trudy
Pelzer--which give a comprehensive overview of the standard, including
`INFORMATION_SCHEMA'.

*B.7.4: ** What is the difference between the Oracle Data Dictionary and
MySQL's `INFORMATION_SCHEMA'?  *

Both Oracle and MySQL provide metadata in tables. However, Oracle and
MySQL use different table names and column names.  MySQL's
implementation is more similar to those found in DB2 and SQL Server,
which also support `INFORMATION_SCHEMA' as defined in the SQL standard.

*B.7.5: ** Can I add to or otherwise modify the tables found in the
`INFORMATION_SCHEMA' database?  *

No. Since applications may rely on a certain standard structure, this
should not be modified. For this reason, _we cannot support bugs or
other issues which result from modifying `INFORMATION_SCHEMA' tables or
data_.


File: manual.info,  Node: faqs-migration,  Next: faqs-security,  Prev: faqs-information-schema,  Up: faqs

B.8 MySQL 5.5 FAQ: Migration
============================

*Questions*
   * B.8.1: Where can I find information on how to migrate from MySQL
     5.1 to MySQL 5.5?

   * B.8.2: How has storage engine (table type) support changed in MySQL
     5.5 from previous versions?

*Questions and Answers* *B.8.1: ** Where can I find information on how
to migrate from MySQL 5.1 to MySQL 5.5?  *

For detailed upgrade information, see *Note upgrading::. Do not skip a
major version when upgrading, but rather complete the process in steps,
upgrading from one major version to the next in each step. This may seem
more complicated, but it will you save time and trouble--if you
encounter problems during the upgrade, their origin will be easier to
identify, either by you or--if you have a MySQL Enterprise
subscription--by MySQL support.

*B.8.2: ** How has storage engine (table type) support changed in MySQL
5.5 from previous versions?  *

Storage engine support has changed as follows:

   * Support for `ISAM' tables was removed in MySQL 5.0 and you should
     now use the `MyISAM' storage engine in place of `ISAM'. To convert
     a table TBLNAME from `ISAM' to `MyISAM', simply issue a statement
     such as this one:

          ALTER TABLE TBLNAME ENGINE=MYISAM;

   * Internal `RAID' for `MyISAM' tables was also removed in MySQL 5.0.
     This was formerly used to allow large tables in file systems that
     did not support file sizes greater than 2GB.  All modern file
     systems allow for larger tables; in addition, there are now other
     solutions such as `MERGE' tables and views.

   * The *Note `VARCHAR': char. column type now retains trailing spaces
     in all storage engines.

   * `MEMORY' tables (formerly known as `HEAP' tables) can also contain
     *Note `VARCHAR': char. columns.


File: manual.info,  Node: faqs-security,  Next: faqs-mysql-cluster,  Prev: faqs-migration,  Up: faqs

B.9 MySQL 5.5 FAQ: Security
===========================

*Questions*
   * B.9.1: Where can I find documentation that addresses security
     issues for MySQL?

   * B.9.2: Does MySQL 5.5 have native support for SSL?

   * B.9.3: Is SSL support be built into MySQL binaries, or must I
     recompile the binary myself to enable it?

   * B.9.4: Does MySQL 5.5 have built-in authentication against LDAP
     directories?

   * B.9.5: Does MySQL 5.5 include support for Roles Based Access
     Control (RBAC)?

*Questions and Answers* *B.9.1: ** Where can I find documentation that
addresses security issues for MySQL?  *

The best place to start is *Note security::.

Other portions of the MySQL Documentation which you may find useful
with regard to specific security concerns include the following:

   * *Note security-guidelines::.

   * *Note security-against-attack::.

   * *Note resetting-permissions::.

   * *Note changing-mysql-user::.

   * *Note udf-security::.

   * *Note security-options::.

   * *Note load-data-local::.

   * *Note postinstallation::.

   * *Note ssl-basics::.

*B.9.2: ** Does MySQL 5.5 have native support for SSL?  *

Most 5.5 binaries have support for SSL connections between the client
and server. See *Note ssl-connections::.

You can also tunnel a connection using SSH, if (for example) the client
application does not support SSL connections. For an example, see *Note
windows-and-ssh::.

*B.9.3: ** Is SSL support be built into MySQL binaries, or must I
recompile the binary myself to enable it?  *

Most 5.5 binaries have SSL enabled for client-server connections that
are secured, authenticated, or both. See *Note ssl-connections::.

*B.9.4: ** Does MySQL 5.5 have built-in authentication against LDAP
directories?  *

Not at this time.

*B.9.5: ** Does MySQL 5.5 include support for Roles Based Access
Control (RBAC)?  *

Not at this time.


File: manual.info,  Node: faqs-mysql-cluster,  Next: faqs-cjk,  Prev: faqs-security,  Up: faqs

B.10 MySQL FAQ: MySQL 5.5 and MySQL Cluster
===========================================

In the following section, we answer questions that are frequently asked
about MySQL Cluster and the *Note `NDBCLUSTER': mysql-cluster. storage
engine.

*Questions*
   * B.10.1: Which versions of the MySQL software support Cluster? Do I
     have to compile from source?

   * B.10.2: What do `NDB' and `NDBCLUSTER' mean?

   * B.10.3: What is the difference between using MySQL Cluster _vs_
     using MySQL Replication?

   * B.10.4: Do I need any special networking to run MySQL Cluster? How
     do computers in a cluster communicate?

   * B.10.5: How many computers do I need to run a MySQL Cluster, and
     why?

   * B.10.6: What do the different computers do in a MySQL Cluster?

   * B.10.7: When I run the `SHOW' command in the MySQL Cluster
     management client, I see a line of output that looks like this:

          id=2    @10.100.10.32  (Version: 5.6.13-ndb-7.3.3 Nodegroup: 0, Master)

     What is a `master node', and what does it do? How do I configure a
     node so that it is the master?

   * B.10.8: With which operating systems can I use MySQL Cluster?

   * B.10.9: What are the hardware requirements for running MySQL
     Cluster?

   * B.10.10: How much RAM do I need to use MySQL Cluster? Is it
     possible to use disk memory at all?

   * B.10.11: What file systems can I use with MySQL Cluster? What about
     network file systems or network shares?

   * B.10.12: Can I run MySQL Cluster nodes inside virtual machines
     (such as those created by VMWare, Parallels, or Xen)?

   * B.10.13: I am trying to populate a MySQL Cluster database. The
     loading process terminates prematurely and I get an error message
     like this one:

     ``ERROR 1114: The table 'my_cluster_table' is full''

     Why is this happening?

   * B.10.14: MySQL Cluster uses TCP/IP. Does this mean that I can run
     it over the Internet, with one or more nodes in remote locations?

   * B.10.15: Do I have to learn a new programming or query language to
     use MySQL Cluster?

   * B.10.16: What programming languages and APIs are supported by MySQL
     Cluster?

   * B.10.17: Does MySQL Cluster include any management tools?

   * B.10.18: How do I find out what an error or warning message means
     when using MySQL Cluster?

   * B.10.19: Is MySQL Cluster transaction-safe? What isolation levels
     are supported?

   * B.10.20: What storage engines are supported by MySQL Cluster?

   * B.10.21: In the event of a catastrophic failure--say, for instance,
     the whole city loses power _and_ my UPS fails--would I lose all my
     data?

   * B.10.22: Is it possible to use `FULLTEXT' indexes with MySQL
     Cluster?

   * B.10.23: Can I run multiple nodes on a single computer?

   * B.10.24: Are there any limitations that I should be aware of when
     using MySQL Cluster?

   * B.10.25: Does MySQL Cluster support foreign keys?

   * B.10.26: How do I import an existing MySQL database into a MySQL
     Cluster?

   * B.10.27: How do MySQL Cluster nodes communicate with one another?

   * B.10.28: What is an _arbitrator_?

   * B.10.29: What data types are supported by MySQL Cluster?

   * B.10.30: How do I start and stop MySQL Cluster?

   * B.10.31: What happens to MySQL Cluster data when the MySQL Cluster
     is shut down?

   * B.10.32: Is it a good idea to have more than one management node
     for a MySQL Cluster?

   * B.10.33: Can I mix different kinds of hardware and operating
     systems in one MySQL Cluster?

   * B.10.34: Can I run two data nodes on a single host? Two SQL nodes?

   * B.10.35: Can I use host names with MySQL Cluster?

   * B.10.36: Does MySQL Cluster support IPv6?

   * B.10.37: How do I handle MySQL users in a MySQL Cluster having
     multiple MySQL servers?

   * B.10.38: How do I continue to send queries in the event that one
     of the SQL nodes fails?

   * B.10.39: How do I back up and restore a MySQL Cluster?

   * B.10.40: What is an `angel process'?

*Questions and Answers* *B.10.1: ** Which versions of the MySQL
software support Cluster? Do I have to compile from source?  *

MySQL Cluster is not supported in standard MySQL Server 5.5 releases.
Instead, MySQL Cluster is provided as a separate product. Currently,
the following MySQL Cluster release series are available for production
use:

   * MySQL Cluster NDB 6.3

     This series is still maintained and available for use but is not
     recommended for new deployments. The most recent MySQL Cluster NDB
     6.3 release can be obtained from
     `http://dev.mysql.com/downloads/cluster/'.

   * MySQL Cluster NDB 7.0

     This series is still available for use in production, although
     MySQL Cluster NDB 7.2 is recommended for new deployments. The most
     recent MySQL Cluster NDB 7.0 release can be obtained from
     `http://dev.mysql.com/downloads/cluster/'.

   * MySQL Cluster NDB 7.1

     This series is a previous General Availability (GA) version of
     MySQL Cluster, still available for production, although we
     recommend that new deployments use MySQL Cluster NDB 7.3. The most
     recent MySQL Cluster NDB 7.1 release can be obtained from
     `http://dev.mysql.com/downloads/cluster/'.

   * MySQL Cluster NDB 7.2

     This series is a General Availability (GA) version of MySQL
     Cluster, still available for production, although we recommend
     that new deployments use the latest MySQL Cluster NDB 7.3 release.
     The most recent MySQL Cluster NDB 7.2 release can be obtained from
     `http://dev.mysql.com/downloads/cluster/'.

   * MySQL Cluster NDB 7.3

     This series is the latest Generally Available (GA) version of
     MySQL Cluster, based on version 7.3 of the *Note `NDB':
     mysql-cluster. storage engine and MySQL Server 5.6. New
     deployments should use the latest release in this series. The most
     recent MySQL Cluster NDB 7.3 release can be obtained from
     `http://dev.mysql.com/downloads/cluster/'.

You should use MySQL Cluster NDB 7.2 or MySQL Cluster NDB 7.3 for any
new deployments; if you are using an older version of MySQL Cluster,
you should upgrade to one of these soon as possible. For an overview of
improvements made in MySQL Cluster NDB 7.2, see *Note
mysql-cluster-development-5-5-ndb-7-2::; for information about
improvements made in MySQL Cluster NDB 7.3, see MySQL Cluster
Development in MySQL Cluster NDB 7.3
(http://dev.mysql.com/doc/refman/5.6/en/mysql-cluster-development-5-6-ndb-7-3.html).

You can determine whether your MySQL Server has *Note `NDB':
mysql-cluster. support using one of the statements `SHOW VARIABLES LIKE
'have_%'', *Note `SHOW ENGINES': show-engines, or *Note `SHOW PLUGINS':
show-plugins.

*B.10.2: ** What do `NDB' and `NDBCLUSTER' mean?  *

`NDB' stands for `*N*etwork *D*ata*b*ase'.  *Note `NDB': mysql-cluster.
and *Note `NDBCLUSTER': mysql-cluster. are both names for the storage
engine that enables clustering support in MySQL. While our developers
prefer *Note `NDB': mysql-cluster, either name is correct; both names
appear in our documentation, and either name can be used in the
`ENGINE' option of a *Note `CREATE TABLE': create-table. statement for
creating a MySQL Cluster table.

*B.10.3: ** What is the difference between using MySQL Cluster _vs_
using MySQL Replication?  *

In traditional MySQL replication, a master MySQL server updates one or
more slaves. Transactions are committed sequentially, and a slow
transaction can cause the slave to lag behind the master.  This means
that if the master fails, it is possible that the slave might not have
recorded the last few transactions. If a transaction-safe engine such as
*Note `InnoDB': innodb-storage-engine. is being used, a transaction
will either be complete on the slave or not applied at all, but
replication does not guarantee that all data on the master and the
slave will be consistent at all times. In MySQL Cluster, all data nodes
are kept in synchrony, and a transaction committed by any one data node
is committed for all data nodes. In the event of a data node failure,
all remaining data nodes remain in a consistent state.

In short, whereas standard MySQL replication is _asynchronous_, MySQL
Cluster is _synchronous_.

Asynchronous replication is also available in MySQL Cluster.  _MySQL
Cluster Replication_ (also sometimes known as `geo-replication')
includes the capability to replicate both between two MySQL Clusters,
and from a MySQL Cluster to a non-Cluster MySQL server. See *Note
mysql-cluster-replication::.

*B.10.4: ** Do I need any special networking to run MySQL Cluster? How
do computers in a cluster communicate?  *

MySQL Cluster is intended to be used in a high-bandwidth environment,
with computers connecting using TCP/IP. Its performance depends
directly upon the connection speed between the cluster's computers. The
minimum connectivity requirements for MySQL Cluster include a typical
100-megabit Ethernet network or the equivalent. We recommend you use
gigabit Ethernet whenever available.

The faster SCI protocol is also supported, but requires special
hardware. See *Note mysql-cluster-interconnects::, for more information
about SCI.

*B.10.5: ** How many computers do I need to run a MySQL Cluster, and
why?  *

A minimum of three computers is required to run a viable cluster.
However, the minimum _recommended_ number of computers in a MySQL
Cluster is four: one each to run the management and SQL nodes, and two
computers to serve as data nodes. The purpose of the two data nodes is
to provide redundancy; the management node must run on a separate
machine to guarantee continued arbitration services in the event that
one of the data nodes fails.

To provide increased throughput and high availability, you should use
multiple SQL nodes (MySQL Servers connected to the cluster). It is also
possible (although not strictly necessary) to run multiple management
servers.

*B.10.6: ** What do the different computers do in a MySQL Cluster?  *

A MySQL Cluster has both a physical and logical organization, with
computers being the physical elements. The logical or functional
elements of a cluster are referred to as _nodes_, and a computer
housing a cluster node is sometimes referred to as a _cluster host_.
There are three types of nodes, each corresponding to a specific role
within the cluster. These are:

   * Management node

     This node provides management services for the cluster as a whole,
     including startup, shutdown, backups, and configuration data for
     the other nodes. The management node server is implemented as the
     application *Note `ndb_mgmd': mysql-cluster-programs-ndb-mgmd.;
     the management client used to control MySQL Cluster is *Note
     `ndb_mgm': mysql-cluster-programs-ndb-mgm. See *Note
     mysql-cluster-programs-ndb-mgmd::, and *Note
     mysql-cluster-programs-ndb-mgm::, for information about these
     programs.

   * Data node

     This type of node stores and replicates data. Data node
     functionality is handled by instances of the *Note `NDB':
     mysql-cluster. data node process *Note `ndbd':
     mysql-cluster-programs-ndbd. For more information, see *Note
     mysql-cluster-programs-ndbd::.

   * SQL node

     This is simply an instance of MySQL Server (*Note `mysqld':
     mysqld.) that is built with support for the *Note `NDBCLUSTER':
     mysql-cluster. storage engine and started with the `--ndb-cluster'
     option to enable the engine and the `--ndb-connectstring' option
     to enable it to connect to a MySQL Cluster management server. For
     more about these options, see *Note
     mysql-cluster-program-options-mysqld::.

     *Note*:

     An _API node_ is any application that makes direct use of Cluster
     data nodes for data storage and retrieval. An SQL node can thus be
     considered a type of API node that uses a MySQL Server to provide
     an SQL interface to the Cluster. You can write such applications
     (that do not depend on a MySQL Server) using the NDB API, which
     supplies a direct, object-oriented transaction and scanning
     interface to MySQL Cluster data; see MySQL Cluster API Overview:
     The NDB API
     (http://dev.mysql.com/doc/ndbapi/en/overview-ndb-api.html), for
     more information.

*B.10.7: ** When I run the `SHOW' command in the MySQL Cluster
management client, I see a line of output that looks like this: *
     id=2    @10.100.10.32  (Version: 5.6.13-ndb-7.3.3 Nodegroup: 0, Master)
* What is a `master node', and what does it do? How do I configure a
node so that it is the master?  *

The simplest answer is, `It's not something you can control, and it's
nothing that you need to worry about in any case, unless you're a
software engineer writing or analyzing the MySQL Cluster source code'.

If you don't find that answer satisfactory, here's a longer and more
technical version:

A number of mechanisms in MySQL Cluster require distributed
coordination among the data nodes. These distributed algorithms and
protocols include global checkpointing, DDL (schema) changes, and node
restart handling. To make this coordination simpler, the data nodes
`elect' one of their number to be a `master'. There is no user-facing
mechanism for influencing this selection, which is is completely
automatic; the fact that it _is_ automatic is a key part of MySQL
Cluster's internal architecture.

When a node acts as a master for any of these mechanisms, it is usually
the point of coordination for the activity, and the other nodes act as
`servants', carrying out their parts of the activity as directed by the
master. If the node acting as master fails, then the remaining nodes
elect a new master. Tasks in progress that were being coordinated by
the old master may either fail or be continued by the new master,
depending on the actual mechanism involved.

It is possible for some of these different mechanisms and protocols to
have different master nodes, but in general the same master is chosen
for all of them. The node indicated as the master in the output of
`SHOW' in the management client is actually the `DICT' master (see The
`DBDICT' Block
(http://dev.mysql.com/doc/ndbapi/en/ndb-internals-kernel-blocks-dbdict.html),
in the `MySQL Cluster API Developer Guide', for more information),
responsible for coordinating DDL and metadata activity.

MySQL Cluster is designed in such a way that the choice of master has
no discernable effect outside the cluster itself. For example, the
current master does not have significantly higher CPU or resource usage
than the other data nodes, and failure of the master should not have a
significantly different impact on the cluster than the failure of any
other data node.

*B.10.8: ** With which operating systems can I use MySQL Cluster?  *

MySQL Cluster is supported on most Unix-like operating systems.  MySQL
Cluster NDB 7.2 is also supported in production settings on Microsoft
Windows operating systems.

For more detailed information concerning the level of support which is
offered for MySQL Cluster on various operating system versions,
operating system distributions, and hardware platforms, please refer to
http://www.mysql.com/support/supportedplatforms/cluster.html.

*B.10.9: ** What are the hardware requirements for running MySQL
Cluster?  *

MySQL Cluster should run on any platform for which *Note `NDB':
mysql-cluster.-enabled binaries are available.  For data nodes and API
nodes, faster CPUs and more memory are likely to improve performance,
and 64-bit CPUs are likely to be more effective than 32-bit processors.
There must be sufficient memory on machines used for data nodes to hold
each node's share of the database (see _How much RAM do I Need?_ for
more information). For a computer which is used only for running the
MySQL Cluster management server, the requirements are minimal; a common
desktop PC (or the equivalent) is generally sufficient for this task.
Nodes can communicate through the standard TCP/IP network and hardware.
They can also use the high-speed SCI protocol; however, special
networking hardware and software are required to use SCI (see *Note
mysql-cluster-interconnects::).

*B.10.10: ** How much RAM do I need to use MySQL Cluster? Is it
possible to use disk memory at all?  *

Formerly MySQL Cluster was in-memory only. MySQL 5.1 and later also
provide the ability to store MySQL Cluster on disk. (Note that we have
no plans to backport this capability to previous releases.) See *Note
mysql-cluster-disk-data::, for more information.

For in-memory `NDB' tables, you can use the following formula for
obtaining a rough estimate of how much RAM is needed for each data node
in the cluster:

     (SizeofDatabase x NumberOfReplicas x 1.1 ) / NumberOfDataNodes

To calculate the memory requirements more exactly requires determining,
for each table in the cluster database, the storage space required per
row (see *Note storage-requirements::, for details), and multiplying
this by the number of rows. You must also remember to account for any
column indexes as follows:

   * Each primary key or hash index created for an *Note `NDBCLUSTER':
     mysql-cluster. table requires 21-25 bytes per record. These
     indexes use `IndexMemory'.

   * Each ordered index requires 10 bytes storage per record, using
     `DataMemory'.

   * Creating a primary key or unique index also creates an ordered
     index, unless this index is created with `USING HASH'. In other
     words:

        * A primary key or unique index on a Cluster table normally
          takes up 31 to 35 bytes per record.

        * However, if the primary key or unique index is created with
          `USING HASH', then it requires only 21 to 25 bytes per record.

Note that creating MySQL Cluster tables with `USING HASH' for all
primary keys and unique indexes will generally cause table updates to
run more quickly--in some cases by a much as 20 to 30 percent faster
than updates on tables where `USING HASH' was not used in creating
primary and unique keys. This is due to the fact that less memory is
required (because no ordered indexes are created), and that less CPU
must be utilized (because fewer indexes must be read and possibly
updated). However, it also means that queries that could otherwise use
range scans must be satisfied by other means, which can result in
slower selects.

When calculating Cluster memory requirements, you may find useful the
*Note `ndb_size.pl': mysql-cluster-programs-ndb-size-pl. utility which
is available in recent MySQL 5.5 releases. This Perl script connects to
a current (non-Cluster) MySQL database and creates a report on how much
space that database would require if it used the *Note `NDBCLUSTER':
mysql-cluster. storage engine. For more information, see *Note
mysql-cluster-programs-ndb-size-pl::.

It is especially important to keep in mind that _every MySQL Cluster
table must have a primary key_. The *Note `NDB': mysql-cluster. storage
engine creates a primary key automatically if none is defined; this
primary key is created without `USING HASH'.

You can determine how much memory is being used for storage of MySQL
Cluster data and indexes at any given time using the `REPORT
MEMORYUSAGE' command in the *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm. client; see *Note
mysql-cluster-mgm-client-commands::, for more information. In addition,
warnings are written to the cluster log when 80% of available
`DataMemory' or `IndexMemory' is in use, and again when usage reaches
85%, 90%, and so on.

*B.10.11: ** What file systems can I use with MySQL Cluster? What about
network file systems or network shares?  *

Generally, any file system that is native to the host operating system
should work well with MySQL Cluster. If you find that a given file
system works particularly well (or not so especially well) with MySQL
Cluster, we invite you to discuss your findings in the MySQL Cluster
Forums (http://forums.mysql.com/list.php?25).

For Windows, we recommend that you use `NTFS' file systems for MySQL
Cluster, just as we do for standard MySQL. We do not test MySQL Cluster
with `FAT' or `VFAT' file systems. Because of this, we do not recommend
their use with MySQL or MySQL Cluster.

MySQL Cluster is implemented as a shared-nothing solution; the idea
behind this is that the failure of a single piece of hardware should
not cause the failure of multiple cluster nodes, or possibly even the
failure of the cluster as a whole. For this reason, the use of network
shares or network file systems is not supported for MySQL Cluster. This
also applies to shared storage devices such as SANs.

*B.10.12: ** Can I run MySQL Cluster nodes inside virtual machines
(such as those created by VMWare, Parallels, or Xen)?  *

MySQL Cluster is supported for use in virtual machines beginning with
MySQL Cluster NDB 7.2. We currently support and test using Oracle VM
(http://www.oracle.com/technetwork/server-storage/vm/index.html).

Some MySQL Cluster users have successfully deployed MySQL Cluster using
other virtualization products; in such cases, Oracle can provide MySQL
Cluster support, but issues specific to the virtual environment must be
referred to that product's vendor.

*B.10.13: ** I am trying to populate a MySQL Cluster database. The
loading process terminates prematurely and I get an error message like
this one: ** ``ERROR 1114: The table 'my_cluster_table' is full'' **
Why is this happening?  *

The cause is very likely to be that your setup does not provide
sufficient RAM for all table data and all indexes, _including the
primary key required by the *Note `NDB': mysql-cluster. storage engine
and automatically created in the event that the table definition does
not include the definition of a primary key_.

It is also worth noting that all data nodes should have the same amount
of RAM, since no data node in a cluster can use more memory than the
least amount available to any individual data node. For example, if
there are four computers hosting Cluster data nodes, and three of these
have 3GB of RAM available to store Cluster data while the remaining
data node has only 1GB RAM, then each data node can devote at most 1GB
to MySQL Cluster data and indexes.

In some cases it is possible to get `Table is full' errors in MySQL
client applications even when *Note `ndb_mgm -e "ALL REPORT
MEMORYUSAGE"': mysql-cluster-programs-ndb-mgm. shows significant free
`DataMemory'. You can force *Note `NDB': mysql-cluster. to create extra
partitions for MySQL Cluster tables and thus have more memory available
for hash indexes by using the `MAX_ROWS' option for *Note `CREATE
TABLE': create-table. In general, setting `MAX_ROWS' to twice the
number of rows that you expect to store in the table should be
sufficient.

For similar reasons, you can also sometimes encounter problems with
data node restarts on nodes that are heavily loaded with data. In MySQL
Cluster NDB 7.1 and later, the addition of the `MinFreePct' parameter
helps with this issue by reserving a portion (5% by default) of
`DataMemory' and `IndexMemory' for use in restarts. This reserved
memory is not available for storing *Note `NDB': mysql-cluster. tables
or data.

*B.10.14: ** MySQL Cluster uses TCP/IP. Does this mean that I can run
it over the Internet, with one or more nodes in remote locations?  *

It is _very_ unlikely that a cluster would perform reliably under such
conditions, as MySQL Cluster was designed and implemented with the
assumption that it would be run under conditions guaranteeing dedicated
high-speed connectivity such as that found in a LAN setting using 100
Mbps or gigabit Ethernet--preferably the latter. We neither test nor
warrant its performance using anything slower than this.

Also, it is extremely important to keep in mind that communications
between the nodes in a MySQL Cluster are not secure; they are neither
encrypted nor safeguarded by any other protective mechanism. The most
secure configuration for a cluster is in a private network behind a
firewall, with no direct access to any Cluster data or management nodes
from outside. (For SQL nodes, you should take the same precautions as
you would with any other instance of the MySQL server.) For more
information, see *Note mysql-cluster-security::.

*B.10.15: ** Do I have to learn a new programming or query language to
use MySQL Cluster?  *

_No_. Although some specialized commands are used to manage and
configure the cluster itself, only standard (My)SQL statements are
required for the following operations:

   * Creating, altering, and dropping tables

   * Inserting, updating, and deleting table data

   * Creating, changing, and dropping primary and unique indexes

Some specialized configuration parameters and files are required to set
up a MySQL Cluster--see *Note mysql-cluster-config-file::, for
information about these.

A few simple commands are used in the MySQL Cluster management client
(*Note `ndb_mgm': mysql-cluster-programs-ndb-mgm.) for tasks such as
starting and stopping cluster nodes. See *Note
mysql-cluster-mgm-client-commands::.

*B.10.16: ** What programming languages and APIs are supported by MySQL
Cluster?  *

MySQL Cluster supports the same programming APIs and languages as the
standard MySQL Server, including ODBC, .Net, the MySQL C API, and
numerous drivers for popular scripting languages such as PHP, Perl, and
Python. MySQL Cluster applications written using these APIs behave
similarly to other MySQL applications; they transmit SQL statements to
a MySQL Server (in the case of MySQL Cluster, an SQL node), and receive
responses containing rows of data. For more information about these
APIs, see *Note connectors-apis::.

MySQL Cluster also supports application programming using the NDB API,
which provides a low-level C++ interface to MySQL Cluster data without
needing to go through a MySQL Server. See The NDB API
(http://dev.mysql.com/doc/ndbapi/en/ndbapi.html). In addition, many
*Note `NDBCLUSTER': mysql-cluster. management functions are exposed by
the C-language MGM API; see The MGM API
(http://dev.mysql.com/doc/ndbapi/en/mgm-api.html), for more information.

MySQL Cluster NDB 7.1 and later also support Java application
programming using ClusterJ, which supports a domain object model of
data using sessions and transactions. See Java and MySQL Cluster
(http://dev.mysql.com/doc/ndbapi/en/mccj-overview-java.html), for more
information.

MySQL Cluster NDB 7.2 adds support for `memcached', allowing developers
to access data stored in MySQL Cluster using the `memcached' interface;
for more information, see `ndbmemcache'--Memcache API for MySQL Cluster
(http://dev.mysql.com/doc/ndbapi/en/ndbmemcache.html).

*B.10.17: ** Does MySQL Cluster include any management tools?  *

MySQL Cluster includes a command line client for performing basic
management functions. See *Note mysql-cluster-programs-ndb-mgm::, and
*Note mysql-cluster-mgm-client-commands::.

MySQL Cluster NDB 7.0 and later is also supported by MySQL Cluster
Manager, a separate product providing an advanced command line interface
that can automate many MySQL Cluster management tasks such as rolling
restarts and configuration changes. For more information about MySQL
Cluster Manager, see MySQL(tm) Cluster Manager 1.2.4 User Manual
(http://dev.mysql.com/doc/cluster-manager/en/index.html).

*B.10.18: ** How do I find out what an error or warning message means
when using MySQL Cluster?  *

There are two ways in which this can be done:

   * From within the *Note `mysql': mysql. client, use `SHOW ERRORS' or
     `SHOW WARNINGS' immediately upon being notified of the error or
     warning condition.

   * From a system shell prompt, use *Note `perror --ndb ERROR_CODE':
     perror.

*B.10.19: ** Is MySQL Cluster transaction-safe? What isolation levels
are supported?  *

_Yes_. For tables created with the *Note `NDB': mysql-cluster. storage
engine, transactions are supported. Currently, MySQL Cluster supports
only the `READ COMMITTED' transaction isolation level.

*B.10.20: ** What storage engines are supported by MySQL Cluster?  *

Clustering with MySQL is supported only by the *Note `NDB':
mysql-cluster. storage engine. That is, in order for a table to be
shared between nodes in a MySQL Cluster, the table must be created
using `ENGINE=NDB' (or the equivalent option `ENGINE=NDBCLUSTER').

It is possible to create tables using other storage engines (such as
*Note `InnoDB': innodb-storage-engine. or *Note `MyISAM':
myisam-storage-engine.) on a MySQL server being used with a MySQL
Cluster, but since these tables do not use *Note `NDB': mysql-cluster,
they do not participate in clustering; each such table is strictly
local to the individual MySQL server instance on which it is created.

*B.10.21: ** In the event of a catastrophic failure--say, for instance,
the whole city loses power _and_ my UPS fails--would I lose all my data?
*

All committed transactions are logged. Therefore, although it is
possible that some data could be lost in the event of a catastrophe,
this should be quite limited. Data loss can be further reduced by
minimizing the number of operations per transaction. (It is not a good
idea to perform large numbers of operations per transaction in any
case.)

*B.10.22: ** Is it possible to use `FULLTEXT' indexes with MySQL
Cluster?  *

`FULLTEXT' indexing is currently not supported by any MySQL storage
engine other than *Note `MyISAM': myisam-storage-engine.

*B.10.23: ** Can I run multiple nodes on a single computer?  *

It is possible but not always advisable. One of the chief reasons to
run a cluster is to provide redundancy. To obtain the full benefits of
this redundancy, each node should reside on a separate machine. If you
place multiple nodes on a single machine and that machine fails, you
lose all of those nodes. For this reason, if you do run multiple data
nodes on a single machine, it is _extremely_ important that they be set
up in such a way that the failure of this machine does not cause the
loss of all the data nodes in a given node group.

Given that MySQL Cluster can be run on commodity hardware loaded with a
low-cost (or even no-cost) operating system, the expense of an extra
machine or two is well worth it to safeguard mission-critical data. It
also worth noting that the requirements for a cluster host running a
management node are minimal. This task can be accomplished with a 300
MHz Pentium or equivalent CPU and sufficient RAM for the operating
system, plus a small amount of overhead for the *Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd.  and *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm. processes.

It is acceptable to run multiple cluster data nodes on a single host
that has multiple CPUs, cores, or both. MySQL Cluster NDB 7.0 and later
also provide a multi-threaded version of the data node binary intended
for use on such systems. For more information, see *Note
mysql-cluster-programs-ndbmtd::.

It is also possible in some cases to run data nodes and SQL nodes
concurrently on the same machine; how well such an arrangement performs
is dependent on a number of factors such as number of cores and CPUs as
well as the amount of disk and memory available to the data node and
SQL node processes, and you must take these factors into account when
planning such a configuration.

*B.10.24: ** Are there any limitations that I should be aware of when
using MySQL Cluster?  *

Limitations on *Note `NDB': mysql-cluster. tables in MySQL MySQL
Cluster NDB 7.2 include the following:

   * Temporary tables are not supported; a *Note `CREATE TEMPORARY
     TABLE': create-table. statement using `ENGINE=NDB' or
     `ENGINE=NDBCLUSTER' fails with an error.

   * The only types of user-defined partitioning supported for *Note
     `NDBCLUSTER': mysql-cluster. tables are `KEY' and `LINEAR KEY'.
     Trying to create an `NDB' table using any other partitioning type
     fails with an error.

   * `FULLTEXT' indexes are not supported.

   * Index prefixes are not supported. Only complete columns may be
     indexed.

   * Spatial indexes are not supported (although spatial columns can be
     used). See *Note spatial-extensions::.

   * Support for partial transactions and partial rollbacks is
     comprabale to that of other transactional storage engines such as
     *Note `InnoDB': innodb-storage-engine. that can roll back
     individual statements.

   * The maximum number of attributes allowed per table is 512.
     Attribute names cannot be any longer than 31 characters. For each
     table, the maximum combined length of the table and database names
     is 122 characters.

   * The maximum size for a table row is 14 kilobytes, not counting
     *Note `BLOB': blob. values.

     There is no set limit for the number of rows per `NDB' table.
     Limits on table size depend on a number of factors, in particular
     on the amount of RAM available to each data node.

   * The *Note `NDBCLUSTER': mysql-cluster. engine does not support
     foreign key constraints. As with *Note `MyISAM':
     myisam-storage-engine. tables, if these are specified in a *Note
     `CREATE TABLE': create-table.  or *Note `ALTER TABLE':
     alter-table. statement, they are ignored.

For a complete listing of limitations in MySQL Cluster, see *Note
mysql-cluster-limitations::. See also *Note
mysql-cluster-limitations-resolved::.

*B.10.25: ** Does MySQL Cluster support foreign keys?  *

MySQL Cluster NDB 7.2 does not support foreign key contraints, and
ignores foreign keys in *Note `CREATE TABLE': create-table. statements
(similarly to how *Note `MyISAM': myisam-storage-engine. treats foreign
key syntax).

Foreign key support comparable to that found in the *Note `InnoDB':
innodb-storage-engine. storage engine is provided by *Note `NDB':
mysql-cluster. beginning with MySQL Cluster NDB 7.3. Applications
requiring foreign key support should use MySQL Cluster NDB 7.3 or later.

*B.10.26: ** How do I import an existing MySQL database into a MySQL
Cluster?  *

You can import databases into MySQL Cluster much as you would with any
other version of MySQL. Other than the limitations mentioned elsewhere
in this FAQ, the only other special requirement is that any tables to
be included in the cluster must use the *Note `NDB': mysql-cluster.
storage engine.  This means that the tables must be created with
`ENGINE=NDB' or `ENGINE=NDBCLUSTER'.

It is also possible to convert existing tables that use other storage
engines to *Note `NDBCLUSTER': mysql-cluster. using one or more *Note
`ALTER TABLE': alter-table.  statement. However, the definition of the
table must be compatible with the *Note `NDBCLUSTER': mysql-cluster.
storage engine prior to making the conversion. In MySQL 5.5, an
additional workaround is also required; see *Note
mysql-cluster-limitations::, for details.

*B.10.27: ** How do MySQL Cluster nodes communicate with one another?  *

Cluster nodes can communicate through any of three different transport
mechanisms: TCP/IP, SHM (shared memory), and SCI (Scalable Coherent
Interface). Where available, SHM is used by default between nodes
residing on the same cluster host; however, this is considered
experimental. SCI is a high-speed (1 gigabit per second and higher),
high-availability protocol used in building scalable multi-processor
systems; it requires special hardware and drivers. See *Note
mysql-cluster-interconnects::, for more about using SCI as a transport
mechanism for MySQL Cluster.

*B.10.28: ** What is an _arbitrator_?  *

If one or more data nodes in a cluster fail, it is possible that not
all cluster data nodes will be able to `see' one another. In fact, it
is possible that two sets of data nodes might become isolated from one
another in a network partitioning, also known as a `split-brain'
scenario. This type of situation is undesirable because each set of
data nodes tries to behave as though it is the entire cluster. An
arbitrator is required to decide between the competing sets of data
nodes.

When all data nodes in at least one node group are alive, network
partitioning is not an issue, because no single subset of the cluster
can form a functional cluster on its own. The real problem arises when
no single node group has all its nodes alive, in which case network
partitioning (the `split-brain' scenario) becomes possible. Then an
arbitrator is required. All cluster nodes recognize the same node as
the arbitrator, which is normally the management server; however, it is
possible to configure any of the MySQL Servers in the cluster to act as
the arbitrator instead. The arbitrator accepts the first set of cluster
nodes to contact it, and tells the remaining set to shut down.
Arbitrator selection is controlled by the `ArbitrationRank'
configuration parameter for MySQL Server and management server nodes.
In MySQL Cluster NDB 7.0.7 and later, you can also use the
`ArbitrationRank' configuration parameter to control the arbitrator
selection process. For more information about these parameters, see
*Note mysql-cluster-mgm-definition::.

The role of arbitrator does not in and of itself impose any heavy
demands upon the host so designated, and thus the arbitrator host does
not need to be particularly fast or to have extra memory especially for
this purpose.

*B.10.29: ** What data types are supported by MySQL Cluster?  *

MySQL Cluster supports all of the usual MySQL data types, including
those associated with MySQL's spatial extensions; however, the *Note
`NDB': mysql-cluster. storage engine does not support spatial indexes.
(Spatial indexes are supported only by *Note `MyISAM':
myisam-storage-engine.; see *Note spatial-extensions::, for more
information.) In addition, there are some differences with regard to
indexes when used with *Note `NDB': mysql-cluster. tables.

*Note*:

MySQL Cluster Disk Data tables (that is, tables created with
`TABLESPACE ... STORAGE DISK ENGINE=NDB' or `TABLESPACE ... STORAGE DISK
ENGINE=NDBCLUSTER') have only fixed-width rows. This means that (for
example) each Disk Data table record containing a *Note `VARCHAR(255)':
char.  column requires space for 255 characters (as required for the
character set and collation being used for the table), regardless of
the actual number of characters stored therein.

See *Note mysql-cluster-limitations::, for more information about these
issues.

*B.10.30: ** How do I start and stop MySQL Cluster?  *

It is necessary to start each node in the cluster separately, in the
following order:

  1. Start the management node, using the *Note `ndb_mgmd':
     mysql-cluster-programs-ndb-mgmd. command.

     You must include the `-f' or `--config-file' option to tell the
     management node where its configuration file can be found.

  2. Start each data node with the *Note `ndbd':
     mysql-cluster-programs-ndbd.  command.

     Each data node must be started with the `-c' or
     `--ndb-connectstring' option so that the data node knows how to
     connect to the management server.

  3. Start each MySQL Server (SQL node) using your preferred startup
     script, such as *Note `mysqld_safe': mysqld-safe.

     Each MySQL Server must be started with the `--ndbcluster' and
     `--ndb-connectstring' options.  These options cause mysqld to
     enable *Note `NDBCLUSTER': mysql-cluster. storage engine support
     and how to connect to the management server.

Each of these commands must be run from a system shell on the machine
housing the affected node. (You do not have to be physically present at
the machine--a remote login shell can be used for this purpose.) You
can verify that the cluster is running by starting the *Note `NDB':
mysql-cluster.  management client *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm. on the machine housing the management
node and issuing the `SHOW' or `ALL STATUS' command.

To shut down a running cluster, issue the command `SHUTDOWN' in the
management client.  Alternatively, you may enter the following command
in a system shell:

     shell> ndb_mgm -e "SHUTDOWN"

(The quotation marks in this example are optional, since there are no
spaces in the command string following the `-e' option; in addition, the
`SHUTDOWN' command, like other management client commands, is not
case-sensitive.)

Either of these commands causes the *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm, *Note `ndb_mgm':
mysql-cluster-programs-ndb-mgm, and any *Note `ndbd':
mysql-cluster-programs-ndbd.  processes to terminate gracefully. MySQL
servers running as SQL nodes can be stopped using *Note `mysqladmin
shutdown': mysqladmin.

For more information, see *Note mysql-cluster-mgm-client-commands::, and
*Note mysql-cluster-install-shutdown-restart::.

*B.10.31: ** What happens to MySQL Cluster data when the MySQL Cluster
is shut down?  *

The data that was held in memory by the cluster's data nodes is written
to disk, and is reloaded into memory the next time that the cluster is
started.

*B.10.32: ** Is it a good idea to have more than one management node
for a MySQL Cluster?  *

It can be helpful as a fail-safe. Only one management node controls the
cluster at any given time, but it is possible to configure one
management node as primary, and one or more additional management nodes
to take over in the event that the primary management node fails.

See *Note mysql-cluster-config-file::, for information on how to
configure MySQL Cluster management nodes.

*B.10.33: ** Can I mix different kinds of hardware and operating
systems in one MySQL Cluster?  *

Yes, as long as all machines and operating systems have the same
`endianness' (all big-endian or all little-endian).  We are working to
overcome this limitation in a future MySQL Cluster release.

It is also possible to use software from different MySQL Cluster
releases on different nodes. However, we support this only as part of a
rolling upgrade procedure (see *Note mysql-cluster-rolling-restart::).

*B.10.34: ** Can I run two data nodes on a single host? Two SQL nodes?
*

Yes, it is possible to do this. In the case of multiple data nodes, it
is advisable (but not required) for each node to use a different data
directory. If you want to run multiple SQL nodes on one machine, each
instance of *Note `mysqld': mysqld. must use a different TCP/IP port.
However, in MySQL 5.5, running more than one cluster node of a given
type per machine is generally not encouraged or supported for
production use.

We also advise against running data nodes and SQL nodes together on the
same host, since the *Note `ndbd': mysql-cluster-programs-ndbd. and
*Note `mysqld': mysqld. processes may compete for memory.

*B.10.35: ** Can I use host names with MySQL Cluster?  *

Yes, it is possible to use DNS and DHCP for cluster hosts.  However, if
your application requires `five nines' availability, you should use
fixed (numeric) IP addresses, since making communication between
Cluster hosts dependent on services such as DNS and DHCP introduces
additional potential points of failure.

*B.10.36: ** Does MySQL Cluster support IPv6?  *

IPv6 is supported for connections between SQL nodes (MySQL servers),
but connections between all other types of MySQL Cluster nodes must use
IPv4.

In practical terms, this means that you can use IPv6 for replication
between MySQL Clusters, but connections between nodes in the same MySQL
Cluster must use IPv4. For more information, see *Note
mysql-cluster-replication-issues::.

*B.10.37: ** How do I handle MySQL users in a MySQL Cluster having
multiple MySQL servers?  *

MySQL user accounts and privileges are normally not automatically
propagated between different MySQL servers accessing the same MySQL
Cluster. Beginning with MySQL Cluster NDB 7.2, MySQL Cluster provides
support for distributed privileges. While privilege distribution is not
enabled automatically, you can activate it by following a procedure
provided in the MySQL Cluster documentation. See *Note
mysql-cluster-privilege-distribution::, for more information.

*B.10.38: ** How do I continue to send queries in the event that one of
the SQL nodes fails?  *

MySQL Cluster does not provide any sort of automatic failover between
SQL nodes. Your application must be prepared to handlethe loss of SQL
nodes and to fail over between them.

*B.10.39: ** How do I back up and restore a MySQL Cluster?  *

You can use the NDB native backup and restore functionality in the
MySQL Cluster management client and the *Note `ndb_restore':
mysql-cluster-programs-ndb-restore. program. See *Note
mysql-cluster-backup::, and *Note mysql-cluster-programs-ndb-restore::.

You can also use the traditional functionality provided for this
purpose in *Note `mysqldump': mysqldump. and the MySQL server.  See
*Note mysqldump::, for more information.

*B.10.40: ** What is an `angel process'?  *

This process monitors and, if necessary, attempts to restart the data
node process. If you check the list of active processes on your system
after starting *Note `ndbd': mysql-cluster-programs-ndbd, you can see
that there are actually 2 processes running by that name, as shown here
(we omit the output from *Note `ndb_mgmd':
mysql-cluster-programs-ndb-mgmd.  and *Note `ndbd':
mysql-cluster-programs-ndbd. for brevity):

     shell> ./ndb_mgmd

     shell> ps aux | grep ndb
     me      23002  0.0  0.0 122948  3104 ?        Ssl  14:14   0:00 ./ndb_mgmd
     me      23025  0.0  0.0   5284   820 pts/2    S+   14:14   0:00 grep ndb

     shell> ./ndbd -c 127.0.0.1 --initial

     shell> ps aux | grep ndb
     me      23002  0.0  0.0 123080  3356 ?        Ssl  14:14   0:00 ./ndb_mgmd
     me      23096  0.0  0.0  35876  2036 ?        Ss   14:14   0:00 ./ndbd -c 127.0.0.1 --initial
     me      23097  1.0  2.4 524116 91096 ?        Sl   14:14   0:00 ./ndbd -c 127.0.0.1 --initial
     me      23168  0.0  0.0   5284   812 pts/2    R+   14:15   0:00 grep ndb

The *Note `ndbd': mysql-cluster-programs-ndbd. process showing 0 memory
and CPU usage is the angel process. It actually does use a very small
amount of each, of course. It simply checks to see if the main *Note
`ndbd': mysql-cluster-programs-ndbd. process (the primary data node
process that actually handles the data) is running. If permitted to do
so (for example, if the `StopOnError' configuration parameter is set to
false--see *Note mysql-cluster-params-ndbd::), the angel process tries
to restart the primary data node process.


File: manual.info,  Node: faqs-cjk,  Next: faqs-connectors-apis,  Prev: faqs-mysql-cluster,  Up: faqs

B.11 MySQL 5.5 FAQ: MySQL Chinese, Japanese, and Korean Character Sets
======================================================================

This set of Frequently Asked Questions derives from the experience of
MySQL's Support and Development groups in handling many inquiries about
CJK (Chinese-Japanese-Korean) issues.

*Questions*
   * B.11.1: What CJK character sets are available in MySQL?

   * B.11.2: I have inserted CJK characters into my table. Why does
     *Note `SELECT': select. display them as `?' characters?

   * B.11.3: What problems should I be aware of when working with the
     Big5 Chinese character set?

   * B.11.4: Why do Japanese character set conversions fail?

   * B.11.5: What should I do if I want to convert SJIS `81CA' to
     `cp932'?

   * B.11.6: How does MySQL represent the Yen (`¥') sign?

   * B.11.7: Does MySQL plan to make a separate character set where
     `5C' is the Yen sign, as at least one other major DBMS does?

   * B.11.8: Of what issues should I be aware when working with Korean
     character sets in MySQL?

   * B.11.9: Why do I get `Incorrect string value' error messages?

   * B.11.10: Why does my GUI front end or browser not display CJK
     characters correctly in my application using Access, PHP, or
     another API?

   * B.11.11: I've upgraded to MySQL 5.5. How can I revert to behavior
     like that in MySQL 4.0 with regard to character sets?

   * B.11.12: Why do some `LIKE' and `FULLTEXT' searches with CJK
     characters fail?

   * B.11.13: How do I know whether character X is available in all
     character sets?

   * B.11.14: Why do CJK strings sort incorrectly in Unicode? (I)

   * B.11.15: Why do CJK strings sort incorrectly in Unicode? (II)

   * B.11.16: Why are my supplementary characters rejected by MySQL?

   * B.11.17: Shouldn't it be `CJKV'?

   * B.11.18: Does MySQL allow CJK characters to be used in database
     and table names?

   * B.11.19: Where can I find translations of the MySQL Manual into
     Chinese, Japanese, and Korean?

   * B.11.20: Where can I get help with CJK and related issues in MySQL?

*Questions and Answers* *B.11.1: ** What CJK character sets are
available in MySQL?  *

The list of CJK character sets may vary depending on your MySQL
version. For example, the `eucjpms' character set was not supported
prior to MySQL 5.0.3. However, since the name of the applicable
language appears in the `DESCRIPTION' column for every entry in the
*Note `INFORMATION_SCHEMA.CHARACTER_SETS': character-sets-table.
table, you can obtain a current list of all the non-Unicode CJK
character sets using this query:

     mysql> SELECT CHARACTER_SET_NAME, DESCRIPTION
         -> FROM INFORMATION_SCHEMA.CHARACTER_SETS
         -> WHERE DESCRIPTION LIKE '%Chinese%'
         -> OR DESCRIPTION LIKE '%Japanese%'
         -> OR DESCRIPTION LIKE '%Korean%'
         -> ORDER BY CHARACTER_SET_NAME;
     +--------------------+---------------------------+
     | CHARACTER_SET_NAME | DESCRIPTION               |
     +--------------------+---------------------------+
     | big5               | Big5 Traditional Chinese  |
     | cp932              | SJIS for Windows Japanese |
     | eucjpms            | UJIS for Windows Japanese |
     | euckr              | EUC-KR Korean             |
     | gb2312             | GB2312 Simplified Chinese |
     | gbk                | GBK Simplified Chinese    |
     | sjis               | Shift-JIS Japanese        |
     | ujis               | EUC-JP Japanese           |
     +--------------------+---------------------------+
     8 rows in set (0.01 sec)

(See *Note character-sets-table::, for more information.)

MySQL supports the two common variants of the _GB_ (_Guojia Biaozhun_,
or _National Standard_, or _Simplified Chinese_) character sets which
are official in the People's Republic of China: `gb2312' and `gbk'.
Sometimes people try to insert `gbk' characters into `gb2312', and it
works most of the time because `gbk' is a superset of `gb2312'--but
eventually they try to insert a rarer Chinese character and it doesn't
work. (See Bug #16072 for an example).

Here, we try to clarify exactly what characters are legitimate in
`gb2312' or `gbk', with reference to the official documents. Please
check these references before reporting `gb2312' or `gbk' bugs.

   * For a complete listing of the `gb2312' characters, ordered
     according to the `gb2312_chinese_ci' collation: gb2312
     (http://www.collation-charts.org/mysql60/by-charset.html#gb2312)

   * MySQL's `gbk' is in reality `Microsoft code page 936'. This
     differs from the official `gbk' for characters `A1A4' (middle dot),
     `A1AA' (em dash), `A6E0-A6F5', and `A8BB-A8C0'.

   * For a listing of `gbk'/Unicode mappings, see
     `http://www.unicode.org/Public/MAPPINGS/VENDORS/MICSFT/WINDOWS/CP936.TXT'.

   * For MySQL's listing of `gbk' characters, see gbk
     (http://www.collation-charts.org/mysql60/by-charset.html#gbk).

*B.11.2: ** I have inserted CJK characters into my table. Why does
*Note `SELECT': select. display them as `?' characters?  *

This problem is usually due to a setting in MySQL that doesn't match
the settings for the application program or the operating system. Here
are some common steps for correcting these types of issues:

   * _Be certain of what MySQL version you are using_.

     Use the statement `SELECT VERSION();' to determine this.

   * _Make sure that the database is actually using the desired
     character set_.

     People often think that the client character set is always the
     same as either the server character set or the character set used
     for display purposes. However, both of these are false
     assumptions. You can make sure by checking the result of `SHOW
     CREATE TABLE TABLENAME' or--better yet--by using this statement:

          SELECT character_set_name, collation_name
              FROM information_schema.columns
              WHERE table_schema = your_database_name
                  AND table_name = your_table_name
                  AND column_name = your_column_name;

   * _Determine the hexadecimal value of the character or characters
     that are not being displayed correctly_.

     You can obtain this information for a column COLUMN_NAME in the
     table TABLE_NAME using the following query:

          SELECT HEX(COLUMN_NAME)
          FROM TABLE_NAME;

     `3F' is the encoding for the `?' character; this means that `?' is
     the character actually stored in the column. This most often
     happens because of a problem converting a particular character
     from your client character set to the target character set.

   * _Make sure that a round trip possible--that is, when you select
     LITERAL (or _INTRODUCER HEXADECIMAL-VALUE), you obtain LITERAL as a
     result_.

     For example, the Japanese _Katakana_ character _Pe_ (`ペ'')
     exists in all CJK character sets, and has the code point value
     (hexadecimal coding) `0x30da'. To test a round trip for this
     character, use this query:

          SELECT 'ペ' AS `ペ`;         /* or SELECT _ucs2 0x30da; */

     If the result is not also `ペ', then the round trip has failed.

     For bug reports regarding such failures, we might ask you to
     follow up with `SELECT HEX('ペ');'. Then we can determine whether
     the client encoding is correct.

   * _Make sure that the problem is not with the browser or other
     application, rather than with MySQL_.

     Use the *Note `mysql': mysql. client program (on Windows: *Note
     `mysql.exe': mysql.) to accomplish this task. If *Note `mysql':
     mysql. displays correctly but your application doesn't, then your
     problem is probably due to system settings.

     To find out what your settings are, use the *Note `SHOW
     VARIABLES': show-variables. statement, whose output should
     resemble what is shown here:

          mysql> SHOW VARIABLES LIKE 'char%';
          +--------------------------+----------------------------------------+
          | Variable_name            | Value                                  |
          +--------------------------+----------------------------------------+
          | character_set_client     | utf8                                   |
          | character_set_connection | utf8                                   |
          | character_set_database   | latin1                                 |
          | character_set_filesystem | binary                                 |
          | character_set_results    | utf8                                   |
          | character_set_server     | latin1                                 |
          | character_set_system     | utf8                                   |
          | character_sets_dir       | /usr/local/mysql/share/mysql/charsets/ |
          +--------------------------+----------------------------------------+
          8 rows in set (0.03 sec)

     These are typical character-set settings for an
     international-oriented client (notice the use of `utf8' Unicode)
     connected to a server in the West (`latin1' is a West Europe
     character set and a default for MySQL).

     Although Unicode (usually the `utf8' variant on Unix, and the
     `ucs2' variant on Windows) is preferable to Latin, it is often not
     what your operating system utilities support best. Many Windows
     users find that a Microsoft character set, such as `cp932' for
     Japanese Windows, is suitable.

     If you cannot control the server settings, and you have no idea
     what your underlying computer is, then try changing to a common
     character set for the country that you're in (`euckr' = Korea;
     `gb2312' or `gbk' = People's Republic of China; `big5' = Taiwan;
     `sjis', `ujis', `cp932', or `eucjpms' = Japan; `ucs2' or `utf8' =
     anywhere). Usually it is necessary to change only the client and
     connection and results settings. There is a simple statement which
     changes all three at once: `SET NAMES'. For example:

          SET NAMES 'big5';

     Once the setting is correct, you can make it permanent by editing
     `my.cnf' or `my.ini'. For example you might add lines looking like
     these:

          [mysqld]
          character-set-server=big5
          [client]
          default-character-set=big5

     It is also possible that there are issues with the API
     configuration setting being used in your application; see `Why
     does my GUI front end or browser not display CJK characters
     correctly...?' for more information.

*B.11.3: ** What problems should I be aware of when working with the
Big5 Chinese character set?  *

MySQL supports the Big5 character set which is common in Hong Kong and
Taiwan (Republic of China). MySQL's `big5' is in reality Microsoft code
page 950, which is very similar to the original `big5' character set.
We changed to this

character set starting with MySQL version 4.1.16 / 5.0.16 (as a result
of Bug #12476). For example, the following statements work in current
versions of MySQL, but not in old versions:

     mysql> CREATE TABLE big5 (BIG5 CHAR(1) CHARACTER SET BIG5);
     Query OK, 0 rows affected (0.13 sec)

     mysql> INSERT INTO big5 VALUES (0xf9dc);
     Query OK, 1 row affected (0.00 sec)

     mysql> SELECT * FROM big5;
     +------+
     | big5 |
     +------+
     | 嫺  |
     +------+
     1 row in set (0.02 sec)

A feature request for adding `HKSCS' extensions has been filed. People
who need this extension may find the suggested patch for Bug #13577 to
be of interest.

*B.11.4: ** Why do Japanese character set conversions fail?  *

MySQL supports the `sjis', `ujis', `cp932', and `eucjpms' character
sets, as well as Unicode. A common need is to convert between character
sets. For example, there might be a Unix server (typically with `sjis'
or `ujis') and a Windows client (typically with `cp932').

In the following conversion table, the `ucs2' column represents the
source, and the `sjis', `cp932', `ujis', and `eucjpms' columns
represent the destinations--that is, the last 4 columns provide the
hexadecimal result when we use `CONVERT(ucs2)' or we assign a `ucs2'
column containing the value to an `sjis', `cp932', `ujis', or `eucjpms'
column.

Character Name                ucs2      sjis      cp932     ujis      eucjpms
BROKEN BAR                    00A6      3F        3F        8FA2C3    3F
FULLWIDTH BROKEN BAR          FFE4      3F        FA55      3F        8FA2
YEN SIGN                      00A5      3F        3F        20        3F
FULLWIDTH YEN SIGN            FFE5      818F      818F      A1EF      3F
TILDE                         007E      7E        7E        7E        7E
OVERLINE                      203E      3F        3F        20        3F
HORIZONTAL BAR                2015      815C      815C      A1BD      A1BD
EM DASH                       2014      3F        3F        3F        3F
REVERSE SOLIDUS               005C      815F      5C        5C        5C
FULLWIDTH ""                  FF3C      3F        815F      3F        A1C0
WAVE DASH                     301C      8160      3F        A1C1      3F
FULLWIDTH TILDE               FF5E      3F        8160      3F        A1C1
DOUBLE VERTICAL LINE          2016      8161      3F        A1C2      3F
PARALLEL TO                   2225      3F        8161      3F        A1C2
MINUS SIGN                    2212      817C      3F        A1DD      3F
FULLWIDTH HYPHEN-MINUS        FF0D      3F        817C      3F        A1DD
CENT SIGN                     00A2      8191      3F        A1F1      3F
FULLWIDTH CENT SIGN           FFE0      3F        8191      3F        A1F1
POUND SIGN                    00A3      8192      3F        A1F2      3F
FULLWIDTH POUND SIGN          FFE1      3F        8192      3F        A1F2
NOT SIGN                      00AC      81CA      3F        A2CC      3F
FULLWIDTH NOT SIGN            FFE2      3F        81CA      3F        A2CC

Now consider the following portion of the table.

                                         ucs2        sjis        cp932
NOT SIGN                                 00AC        81CA        3F
FULLWIDTH NOT SIGN                       FFE2        3F          81CA

This means that MySQL converts the `NOT SIGN' (Unicode `U+00AC') to
`sjis' code point `0x81CA' and to `cp932' code point `3F'.  (`3F' is
the question mark (`?')--this is what is always used when the
conversion cannot be performed.

*B.11.5: ** What should I do if I want to convert SJIS `81CA' to
`cp932'?  *

Our answer is: `?'. There are serious complaints about this: many
people would prefer a `loose' conversion, so that `81CA (NOT SIGN)' in
`sjis' becomes `81CA (FULLWIDTH NOT SIGN)' in `cp932'. We are
considering a change to this behavior.

*B.11.6: ** How does MySQL represent the Yen (`¥') sign?  *

A problem arises because some versions of Japanese character sets (both
`sjis' and `euc') treat `5C' as a _reverse solidus_ (`\'--also known as
a backslash), and others treat it as a yen sign (`¥').

MySQL follows only one version of the JIS (Japanese Industrial
Standards) standard description. In MySQL, _`5C' is always the reverse
solidus (`\')_.

*B.11.7: ** Does MySQL plan to make a separate character set where `5C'
is the Yen sign, as at least one other major DBMS does?  *

This is one possible solution to the Yen sign issue; however, this will
not happen in MySQL 5.1 or 6.0.

*B.11.8: ** Of what issues should I be aware when working with Korean
character sets in MySQL?  *

In theory, while there have been several versions of the `euckr'
(_Extended Unix Code Korea_) character set, only one problem has been
noted.

We use the `ASCII' variant of EUC-KR, in which the code point `0x5c' is
REVERSE SOLIDUS, that is `\', instead of the `KS-Roman' variant of
EUC-KR, in which the code point `0x5c' is `WON SIGN'(`₩'). This means
that you cannot convert Unicode `U+20A9' to `euckr':

     mysql> SELECT
         ->     CONVERT('₩' USING euckr) AS euckr,
         ->     HEX(CONVERT('₩' USING euckr)) AS hexeuckr;
     +-------+----------+
     | euckr | hexeuckr |
     +-------+----------+
     | ?     | 3F       |
     +-------+----------+
     1 row in set (0.00 sec)

MySQL's graphic Korean chart is here: euckr
(http://www.collation-charts.org/mysql60/by-charset.html#euckr).

*B.11.9: ** Why do I get `Incorrect string value' error messages?  *

For illustration, we'll create a table with one Unicode (`ucs2') column
and one Chinese (`gb2312') column.

     mysql> CREATE TABLE ch
         -> (ucs2 CHAR(3) CHARACTER SET ucs2,
         -> gb2312 CHAR(3) CHARACTER SET gb2312);
     Query OK, 0 rows affected (0.05 sec)

We'll try to place the rare character `汌' in both columns.

     mysql> INSERT INTO ch VALUES ('A汌B','A汌B');
     Query OK, 1 row affected, 1 warning (0.00 sec)

Ah, there is a warning. Use the following statement to see what it is:

     mysql> SHOW WARNINGS\G
     *************************** 1. row ***************************
       Level: Warning
        Code: 1366
     Message: Incorrect string value: '\xE6\xB1\x8CB' for column 'gb2312' at row 1
     1 row in set (0.00 sec)

So it is a warning about the `gb2312' column only.

     mysql> SELECT ucs2,HEX(ucs2),gb2312,HEX(gb2312) FROM ch;
     +-------+--------------+--------+-------------+
     | ucs2  | HEX(ucs2)    | gb2312 | HEX(gb2312) |
     +-------+--------------+--------+-------------+
     | A汌B | 00416C4C0042 | A?B    | 413F42      |
     +-------+--------------+--------+-------------+
     1 row in set (0.00 sec)

Several things need explanation here:

  1. The fact that it is a `warning' rather than an `error' is
     characteristic of MySQL. We like to try to do what we can, to get
     the best fit, rather than give up.

  2. The `汌' character is not in the `gb2312' character set. We
     described that problem earlier.

  3. If you are using an old version of MySQL, you will probably see a
     different message.

  4. With `sql_mode=TRADITIONAL', there would be an error message,
     rather than a warning.

*B.11.10: ** Why does my GUI front end or browser not display CJK
characters correctly in my application using Access, PHP, or another
API?  *

Obtain a direct connection to the server using the *Note `mysql':
mysql. client (Windows: *Note `mysql.exe': mysql.), and try the same
query there. If *Note `mysql': mysql. responds correctly, then the
trouble may be that your application interface requires initialization.
Use *Note `mysql': mysql. to tell you what character set or sets it
uses with the statement `SHOW VARIABLES LIKE 'char%';'. If you are
using Access, then you are most likely connecting with Connector/ODBC.
In this case, you should check *Note connector-odbc-configuration::.
If, for instance, you use `big5', you would enter `SET NAMES 'big5''.
(Note that no `;' is required in this case). If you are using ASP, you
might need to add `SET NAMES' in the code. Here is an example that has
worked in the past:

     <%
     Session.CodePage=0
     Dim strConnection
     Dim Conn
     strConnection="driver={MySQL ODBC 3.51 Driver};server=SERVER;uid=USERNAME;" \
                    & "pwd=PASSWORD;database=DATABASE;stmt=SET NAMES 'big5';"
     Set Conn = Server.CreateObject("ADODB.Connection")
     Conn.Open strConnection
     %>

In much the same way, if you are using any character set other than
`latin1' with Connector/Net, then you must specify the character set in
the connection string. See *Note
connector-net-programming-connecting::, for more information.

If you are using PHP, try this:

     <?php
       $link = mysql_connect($host, $usr, $pwd);

       mysql_select_db($db);

       if( mysql_error() ) { print "Database ERROR: " . mysql_error(); }
       mysql_query("SET NAMES 'utf8'", $link);
     ?>

In this case, we used `SET NAMES' to change `character_set_client' and
`character_set_connection' and `character_set_results'.

We encourage the use of the newer `mysqli' extension, rather than
`mysql'. Using `mysqli', the previous example could be rewritten as
shown here:

     <?php
       $link = new mysqli($host, $usr, $pwd, $db);

       if( mysqli_connect_errno() )
       {
         printf("Connect failed: %s\n", mysqli_connect_error());
         exit();
       }

       $link->query("SET NAMES 'utf8'");
     ?>

Another issue often encountered in PHP applications has to do with
assumptions made by the browser. Sometimes adding or changing a
`<meta>' tag suffices to correct the problem: for example, to insure
that the user agent interprets page content as `UTF-8', you should
include `<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">' in the `<head>' of the HTML page.

If you are using Connector/J, see *Note
connector-j-reference-charsets::.

*B.11.11: ** I've upgraded to MySQL 5.5. How can I revert to behavior
like that in MySQL 4.0 with regard to character sets?  *

In MySQL Version 4.0, there was a single `global' character set for
both server and client, and the decision as to which character to use
was made by the server administrator.  This changed starting with MySQL
Version 4.1. What happens now is a `handshake', as described in *Note
charset-connection:::

When a client connects, it sends to the server the name of the
character set that it wants to use. The server uses the name to set the
`character_set_client', `character_set_results', and
`character_set_connection' system variables. In effect, the server
performs a `SET NAMES' operation using the character set name.

The effect of this is that you cannot control the client character set
by starting *Note `mysqld': mysqld. with `--character-set-server=utf8'.
However, some of our Asian customers have said that they prefer the
MySQL 4.0 behavior. To make it possible to retain this behavior, we
added a *Note `mysqld': mysqld. switch,
`--character-set-client-handshake', which can be turned off with
`--skip-character-set-client-handshake'.  If you start *Note `mysqld':
mysqld. with `--skip-character-set-client-handshake', then, when a
client connects, it sends to the server the name of the character set
that it wants to use--however, _the server ignores this request from the
client_.

By way of example, suppose that your favorite server character set is
`latin1' (unlikely in a CJK area, but this is the default value).
Suppose further that the client uses `utf8' because this is what the
client's operating system supports. Now, start the server with `latin1'
as its default character set:

     mysqld --character-set-server=latin1

And then start the client with the default character set `utf8':

     mysql --default-character-set=utf8

The current settings can be seen by viewing the output of *Note `SHOW
VARIABLES': show-variables.:

     mysql> SHOW VARIABLES LIKE 'char%';
     +--------------------------+----------------------------------------+
     | Variable_name            | Value                                  |
     +--------------------------+----------------------------------------+
     | character_set_client     | utf8                                   |
     | character_set_connection | utf8                                   |
     | character_set_database   | latin1                                 |
     | character_set_filesystem | binary                                 |
     | character_set_results    | utf8                                   |
     | character_set_server     | latin1                                 |
     | character_set_system     | utf8                                   |
     | character_sets_dir       | /usr/local/mysql/share/mysql/charsets/ |
     +--------------------------+----------------------------------------+
     8 rows in set (0.01 sec)

Now stop the client, and then stop the server using *Note `mysqladmin':
mysqladmin. Then start the server again, but this time tell it to skip
the handshake like so:

     mysqld --character-set-server=utf8 --skip-character-set-client-handshake

Start the client with `utf8' once again as the default character set,
then display the current settings:

     mysql> SHOW VARIABLES LIKE 'char%';
     +--------------------------+----------------------------------------+
     | Variable_name            | Value                                  |
     +--------------------------+----------------------------------------+
     | character_set_client     | latin1                                 |
     | character_set_connection | latin1                                 |
     | character_set_database   | latin1                                 |
     | character_set_filesystem | binary                                 |
     | character_set_results    | latin1                                 |
     | character_set_server     | latin1                                 |
     | character_set_system     | utf8                                   |
     | character_sets_dir       | /usr/local/mysql/share/mysql/charsets/ |
     +--------------------------+----------------------------------------+
     8 rows in set (0.01 sec)

As you can see by comparing the differing results from *Note `SHOW
VARIABLES': show-variables, the server ignores the client's initial
settings if the `--skip-character-set-client-handshake' is used.

*B.11.12: ** Why do some `LIKE' and `FULLTEXT' searches with CJK
characters fail?  *

There is a very simple problem with `LIKE' searches on *Note `BINARY':
binary-varbinary. and *Note `BLOB': blob. columns: we need to know the
end of a character. With multi-byte character sets, different
characters might have different octet lengths. For example, in `utf8',
`A' requires one byte but `ペ' requires three bytes, as shown here:

     +-------------------------+---------------------------+
     | OCTET_LENGTH(_utf8 'A') | OCTET_LENGTH(_utf8 'ペ') |
     +-------------------------+---------------------------+
     |                       1 |                         3 |
     +-------------------------+---------------------------+
     1 row in set (0.00 sec)

If we don't know where the first character ends, then we don't know
where the second character begins, in which case even very simple
searches such as `LIKE '_A%'' fail. The solution is to use a regular CJK
character set in the first place, or to convert to a CJK character set
before comparing.

This is one reason why MySQL cannot allow encodings of nonexistent
characters. If it is not strict about rejecting bad input, then it has
no way of knowing where characters end.

For `FULLTEXT' searches, we need to know where words begin and end.
With Western languages, this is rarely a problem because most (if not
all) of these use an easy-to-identify word boundary--the space
character.  However, this is not usually the case with Asian writing. We
could use arbitrary halfway measures, like assuming that all Han
characters represent words, or (for Japanese) depending on changes from
Katakana to Hiragana due to grammatical endings.  However, the only
sure solution requires a comprehensive word list, which means that we
would have to include a dictionary in the server for each Asian
language supported. This is simply not feasible.

*B.11.13: ** How do I know whether character X is available in all
character sets?  *

The majority of simplified Chinese and basic nonhalfwidth Japanese
_Kana_ characters appear in all CJK character sets. This stored
procedure accepts a `UCS-2' Unicode character, converts it to all other
character sets, and displays the results in hexadecimal.

     DELIMITER //

     CREATE PROCEDURE p_convert(ucs2_char CHAR(1) CHARACTER SET ucs2)
     BEGIN

     CREATE TABLE tj
                  (ucs2 CHAR(1) character set ucs2,
                   utf8 CHAR(1) character set utf8,
                   big5 CHAR(1) character set big5,
                   cp932 CHAR(1) character set cp932,
                   eucjpms CHAR(1) character set eucjpms,
                   euckr CHAR(1) character set euckr,
                   gb2312 CHAR(1) character set gb2312,
                   gbk CHAR(1) character set gbk,
                   sjis CHAR(1) character set sjis,
                   ujis CHAR(1) character set ujis);

     INSERT INTO tj (ucs2) VALUES (ucs2_char);

     UPDATE tj SET utf8=ucs2,
                   big5=ucs2,
                   cp932=ucs2,
                   eucjpms=ucs2,
                   euckr=ucs2,
                   gb2312=ucs2,
                   gbk=ucs2,
                   sjis=ucs2,
                   ujis=ucs2;

     /* If there is a conversion problem, UPDATE will produce a warning. */

     SELECT hex(ucs2) AS ucs2,
            hex(utf8) AS utf8,
            hex(big5) AS big5,
            hex(cp932) AS cp932,
            hex(eucjpms) AS eucjpms,
            hex(euckr) AS euckr,
            hex(gb2312) AS gb2312,
            hex(gbk) AS gbk,
            hex(sjis) AS sjis,
            hex(ujis) AS ujis
     FROM tj;

     DROP TABLE tj;

     END//

The input can be any single `ucs2' character, or it can be the code
point value (hexadecimal representation) of that character. For
example, from Unicode's list of `ucs2' encodings and names
(`http://www.unicode.org/Public/UNIDATA/UnicodeData.txt'), we know that
the _Katakana_ character _Pe_ appears in all CJK character sets, and
that its code point value is `0x30da'. If we use this value as the
argument to `p_convert()', the result is as shown here:

     mysql> CALL p_convert(0x30da)//
     +------+--------+------+-------+---------+-------+--------+------+------+------+
     | ucs2 | utf8   | big5 | cp932 | eucjpms | euckr | gb2312 | gbk  | sjis | ujis |
     +------+--------+------+-------+---------+-------+--------+------+------+------+
     | 30DA | E3839A | C772 | 8379  | A5DA    | ABDA  | A5DA   | A5DA | 8379 | A5DA |
     +------+--------+------+-------+---------+-------+--------+------+------+------+
     1 row in set (0.04 sec)

Since none of the column values is `3F'--that is, the question mark
character (`?')--we know that every conversion worked.

*B.11.14: ** Why do CJK strings sort incorrectly in Unicode? (I) *

Sometimes people observe that the result of a `utf8_unicode_ci' or
`ucs2_unicode_ci' search, or of an `ORDER BY' sort is not what they
think a native would expect. Although we never rule out the possibility
that there is a bug, we have found in the past that many people do not
read correctly the standard table of weights for the Unicode Collation
Algorithm. MySQL uses the table found at
`http://www.unicode.org/Public/UCA/4.0.0/allkeys-4.0.0.txt'.  This is
not the first table you will find by navigating from the `unicode.org'
home page, because MySQL uses the older 4.0.0 `allkeys' table, rather
than the more recent 4.1.0 table. (The newer `'520'' collations in
MySQL 5.6 use the 5.2 `allkeys' table.) This is because we are very
wary about changing ordering which affects indexes, lest we bring about
situations such as that reported in Bug #16526, illustrated as follows:

     mysql< CREATE TABLE tj (s1 CHAR(1) CHARACTER SET utf8 COLLATE utf8_unicode_ci);
     Query OK, 0 rows affected (0.05 sec)

     mysql> INSERT INTO tj VALUES ('が'),('か');
     Query OK, 2 rows affected (0.00 sec)
     Records: 2  Duplicates: 0  Warnings: 0

     mysql> SELECT * FROM tj WHERE s1 = 'か';
     +------+
     | s1   |
     +------+
     | が  |
     | か  |
     +------+
     2 rows in set (0.00 sec)

The character in the first result row is not the one that we searched
for. Why did MySQL retrieve it? First we look for the Unicode code
point value, which is possible by reading the hexadecimal number for
the `ucs2' version of the characters:

     mysql> SELECT s1, HEX(CONVERT(s1 USING ucs2)) FROM tj;
     +------+-----------------------------+
     | s1   | HEX(CONVERT(s1 USING ucs2)) |
     +------+-----------------------------+
     | が  | 304C                        |
     | か  | 304B                        |
     +------+-----------------------------+
     2 rows in set (0.03 sec)

Now we search for `304B' and `304C' in the `4.0.0 allkeys' table, and
find these lines:

     304B  ; [.1E57.0020.000E.304B] # HIRAGANA LETTER KA
     304C  ; [.1E57.0020.000E.304B][.0000.0140.0002.3099] # HIRAGANA LETTER GA; QQCM

The official Unicode names (following the `#' mark) tell us the
Japanese syllabary (Hiragana), the informal classification (letter,
digit, or punctuation mark), and the Western identifier (`KA' or `GA',
which happen to be voiced and unvoiced components of the same letter
pair). More importantly, the _primary weight_ (the first hexadecimal
number inside the square brackets) is `1E57' on both lines. For
comparisons in both searching and sorting, MySQL pays attention to the
primary weight only, ignoring all the other numbers. This means that we
are sorting `が' and `か' correctly according to the Unicode
specification. If we wanted to distinguish them, we'd have to use a
non-UCA (Unicode Collation Algorithm) collation (`utf8_bin' or
`utf8_general_ci'), or to compare the `HEX()' values, or use `ORDER BY
CONVERT(s1 USING sjis)'. Being correct `according to Unicode' isn't
enough, of course: the person who submitted the bug was equally
correct. We plan to add another collation for Japanese according to the
JIS X 4061 standard, in which voiced/unvoiced letter pairs like
`KA'/`GA' are distinguishable for ordering purposes.

*B.11.15: ** Why do CJK strings sort incorrectly in Unicode? (II) *

If you are using Unicode (`ucs2' or `utf8'), and you know what the
Unicode sort order is (see *Note faqs-cjk::), but MySQL still seems to
sort your table incorrectly, then you should first verify the table
character set:

     mysql> SHOW CREATE TABLE t\G
     ******************** 1. row ******************
     Table: t
     Create Table: CREATE TABLE `t` (
     `s1` char(1) CHARACTER SET ucs2 DEFAULT NULL
     ) ENGINE=MyISAM DEFAULT CHARSET=latin1
     1 row in set (0.00 sec)

Since the character set appears to be correct, let's see what
information the *Note `INFORMATION_SCHEMA.COLUMNS': columns-table. table
can provide about this column:

     mysql> SELECT COLUMN_NAME, CHARACTER_SET_NAME, COLLATION_NAME
         -> FROM INFORMATION_SCHEMA.COLUMNS
         -> WHERE COLUMN_NAME = 's1'
         -> AND TABLE_NAME = 't';
     +-------------+--------------------+-----------------+
     | COLUMN_NAME | CHARACTER_SET_NAME | COLLATION_NAME  |
     +-------------+--------------------+-----------------+
     | s1          | ucs2               | ucs2_general_ci |
     +-------------+--------------------+-----------------+
     1 row in set (0.01 sec)

(See *Note columns-table::, for more information.)

You can see that the collation is `ucs2_general_ci' instead of
`ucs2_unicode_ci'. The reason why this is so can be found using `SHOW
CHARSET', as shown here:

     mysql> SHOW CHARSET LIKE 'ucs2%';
     +---------+---------------+-------------------+--------+
     | Charset | Description   | Default collation | Maxlen |
     +---------+---------------+-------------------+--------+
     | ucs2    | UCS-2 Unicode | ucs2_general_ci   |      2 |
     +---------+---------------+-------------------+--------+
     1 row in set (0.00 sec)

For `ucs2' and `utf8', the default collation is `general'. To specify a
Unicode collation, use `COLLATE ucs2_unicode_ci'.

*B.11.16: ** Why are my supplementary characters rejected by MySQL?  *

Before MySQL 5.5.3, MySQL does not support supplementary
characters--that is, characters which need more than 3 bytes--for
`UTF-8'. We support only what Unicode calls the _Basic Multilingual
Plane / Plane 0_. Only a few very rare Han characters are
supplementary; support for them is uncommon. This has led to reports
such as that found in Bug #12600, which we rejected as `not a bug'.
With `utf8', we must truncate an input string when we encounter bytes
that we don't understand. Otherwise, we wouldn't know how long the bad
multi-byte character is.

One possible workaround is to use `ucs2' instead of `utf8', in which
case the `bad' characters are changed to question marks; however, no
truncation takes place. You can also change the data type to *Note
`BLOB': blob. or *Note `BINARY': binary-varbinary, which perform no
validity checking.

As of MySQL 5.5.3, Unicode support is extended to include supplementary
characters by means of additional Unicode character sets: `utf16',
`utf32', and 4-byte `utf8mb4'.  These character sets support
supplementary Unicode characters outside the Basic Multilingual Plane
(BMP).

*B.11.17: ** Shouldn't it be `CJKV'?  *

No. The term `CJKV' (_Chinese Japanese Korean Vietnamese_) refers to
Vietnamese character sets which contain Han (originally Chinese)
characters. MySQL has no plan to support the old Vietnamese script
using Han characters. MySQL does of course support the modern Vietnamese
script with Western characters.

As of MySQL 5.6, there are Vietnamese collations for Unicode character
sets, as described in *Note charset-unicode-sets::.

*B.11.18: ** Does MySQL allow CJK characters to be used in database and
table names?  *

This issue is fixed in MySQL 5.1, by automatically rewriting the names
of the corresponding directories and files.

For example, if you create a database named `楮' on a server whose
operating system does not support CJK in directory names, MySQL creates
a directory named `@0w@00a5@00ae'. which is just a fancy way of
encoding `E6A5AE'--that is, the Unicode hexadecimal representation for
the `楮' character. However, if you run a *Note `SHOW DATABASES':
show-databases. statement, you can see that the database is listed as
`楮'.

*B.11.19: ** Where can I find translations of the MySQL Manual into
Chinese, Japanese, and Korean?  *

A Simplified Chinese version of the Manual, current for MySQL 5.1.12,
can be found at `http://dev.mysql.com/doc/'. The Japanese translation
of the MySQL 4.1 manual can be downloaded from
`http://dev.mysql.com/doc/'.

*B.11.20: ** Where can I get help with CJK and related issues in MySQL?
*

The following resources are available:

   * A listing of MySQL user groups can be found at
     `http://dev.mysql.com/user-groups/'.

   * View feature requests relating to character set issues at
     `http://tinyurl.com/y6xcuf'.

   * Visit the MySQL Collation Unicode Forum. We are also in the
     process of adding foreign-language forums at
     `http://forums.mysql.com/'.


File: manual.info,  Node: faqs-connectors-apis,  Next: faqs-replication,  Prev: faqs-cjk,  Up: faqs

B.12 MySQL 5.5 FAQ: Connectors & APIs
=====================================

For common questions, issues, and answers relating to the MySQL
Connectors and other APIs, see the following areas of the Manual:

   * *Note c-api-problems::

   * *Note apis-php-problems::

   * *Note connector-odbc-usagenotes::

   * *Note connector-net-programming::

   * *Note connector-j::


File: manual.info,  Node: faqs-replication,  Next: faqs-thread-pool,  Prev: faqs-connectors-apis,  Up: faqs

B.13 MySQL 5.5 FAQ: Replication
===============================

In the following section, we provide answers to questions that are most
frequently asked about MySQL Replication.

*Questions*
   * B.13.1: Must the slave be connected to the master all the time?

   * B.13.2: Must I enable networking on my master and slave to enable
     replication?

   * B.13.3: How do I know how late a slave is compared to the master?
     In other words, how do I know the date of the last statement
     replicated by the slave?

   * B.13.4: How do I force the master to block updates until the slave
     catches up?

   * B.13.5: What issues should I be aware of when setting up two-way
     replication?

   * B.13.6: How can I use replication to improve performance of my
     system?

   * B.13.7: What should I do to prepare client code in my own
     applications to use performance-enhancing replication?

   * B.13.8: When and how much can MySQL replication improve the
     performance of my system?

   * B.13.9: How can I use replication to provide redundancy or high
     availability?

   * B.13.10: How do I tell whether a master server is using
     statement-based or row-based binary logging format?

   * B.13.11: How do I tell a slave to use row-based replication?

   * B.13.12: How do I prevent *Note `GRANT': grant. and *Note
     `REVOKE': revoke. statements from replicating to slave machines?

   * B.13.13: Does replication work on mixed operating systems (for
     example, the master runs on Linux while slaves run on Mac OS X and
     Windows)?

   * B.13.14: Does replication work on mixed hardware architectures (for
     example, the master runs on a 64-bit machine while slaves run on
     32-bit machines)?

*Questions and Answers* *B.13.1: ** Must the slave be connected to the
master all the time?  *

No, it does not. The slave can go down or stay disconnected for hours
or even days, and then reconnect and catch up on updates.  For example,
you can set up a master/slave relationship over a dial-up link where
the link is up only sporadically and for short periods of time. The
implication of this is that, at any given time, the slave is not
guaranteed to be in synchrony with the master unless you take some
special measures.

To ensure that catchup can occur for a slave that has been
disconnected, you must not remove binary log files from the master that
contain information that has not yet been replicated to the slaves.
Asynchronous replication can work only if the slave is able to continue
reading the binary log from the point where it last read events.

*B.13.2: ** Must I enable networking on my master and slave to enable
replication?  *

Yes, networking must be enabled on the master and slave. If networking
is not enabled, the slave cannot connect to the master and transfer the
binary log. Check that the `skip-networking' option has not been
enabled in the configuration file for either server.

*B.13.3: ** How do I know how late a slave is compared to the master? In
other words, how do I know the date of the last statement replicated by
the slave?  *

Check the `Seconds_Behind_Master' column in the output from *Note `SHOW
SLAVE STATUS': show-slave-status.  See *Note
replication-administration-status::.

When the slave SQL thread executes an event read from the master, it
modifies its own time to the event timestamp. (This is why *Note
`TIMESTAMP': datetime. is well replicated.) In the `Time' column in the
output of *Note `SHOW PROCESSLIST': show-processlist, the number of
seconds displayed for the slave SQL thread is the number of seconds
between the timestamp of the last replicated event and the real time of
the slave machine. You can use this to determine the date of the last
replicated event. Note that if your slave has been disconnected from
the master for one hour, and then reconnects, you may immediately see
large `Time' values such as 3600 for the slave SQL thread in *Note
`SHOW PROCESSLIST': show-processlist. This is because the slave is
executing statements that are one hour old. See *Note
replication-implementation-details::.

*B.13.4: ** How do I force the master to block updates until the slave
catches up?  *

Use the following procedure:

  1. On the master, execute these statements:

          mysql> FLUSH TABLES WITH READ LOCK;
          mysql> SHOW MASTER STATUS;

     Record the replication coordinates (the current binary log file
     name and position) from the output of the *Note `SHOW': show.
     statement.

  2. On the slave, issue the following statement, where the arguments
     to the `MASTER_POS_WAIT()' function are the replication coordinate
     values obtained in the previous step:

          mysql> SELECT MASTER_POS_WAIT('LOG_NAME', LOG_POS);

     The *Note `SELECT': select. statement blocks until the slave
     reaches the specified log file and position.  At that point, the
     slave is in synchrony with the master and the statement returns.

  3. On the master, issue the following statement to enable the master
     to begin processing updates again:

          mysql> UNLOCK TABLES;

*B.13.5: ** What issues should I be aware of when setting up two-way
replication?  *

MySQL replication currently does not support any locking protocol
between master and slave to guarantee the atomicity of a distributed
(cross-server) update. In other words, it is possible for client A to
make an update to co-master 1, and in the meantime, before it
propagates to co-master 2, client B could make an update to co-master 2
that makes the update of client A work differently than it did on
co-master 1. Thus, when the update of client A makes it to co-master 2,
it produces tables that are different from what you have on co-master 1,
even after all the updates from co-master 2 have also propagated. This
means that you should not chain two servers together in a two-way
replication relationship unless you are sure that your updates can
safely happen in any order, or unless you take care of mis-ordered
updates somehow in the client code.

You should also realize that two-way replication actually does not
improve performance very much (if at all) as far as updates are
concerned. Each server must do the same number of updates, just as you
would have a single server do. The only difference is that there is a
little less lock contention because the updates originating on another
server are serialized in one slave thread. Even this benefit might be
offset by network delays.

*B.13.6: ** How can I use replication to improve performance of my
system?  *

Set up one server as the master and direct all writes to it.  Then
configure as many slaves as you have the budget and rackspace for, and
distribute the reads among the master and the slaves. You can also
start the slaves with the `--skip-innodb', `--low-priority-updates', and
`--delay-key-write=ALL' options to get speed improvements on the slave
end. In this case, the slave uses nontransactional `MyISAM' tables
instead of `InnoDB' tables to get more speed by eliminating
transactional overhead.

*B.13.7: ** What should I do to prepare client code in my own
applications to use performance-enhancing replication?  *

See the guide to using replication as a scale-out solution, *Note
replication-solutions-scaleout::.

*B.13.8: ** When and how much can MySQL replication improve the
performance of my system?  *

MySQL replication is most beneficial for a system that processes
frequent reads and infrequent writes. In theory, by using a
single-master/multiple-slave setup, you can scale the system by adding
more slaves until you either run out of network bandwidth, or your
update load grows to the point that the master cannot handle it.

To determine how many slaves you can use before the added benefits
begin to level out, and how much you can improve performance of your
site, you must know your query patterns, and determine empirically by
benchmarking the relationship between the throughput for reads and
writes on a typical master and a typical slave. The example here shows
a rather simplified calculation of what you can get with replication
for a hypothetical system. Let `reads' and `writes' denote the number
of reads and writes per second, respectively.

Let's say that system load consists of 10% writes and 90% reads, and we
have determined by benchmarking that `reads' is 1200 - 2 * `writes'. In
other words, the system can do 1,200 reads per second with no writes,
the average write is twice as slow as the average read, and the
relationship is linear. Suppose that the master and each slave have the
same capacity, and that we have one master and N slaves. Then we have
for each server (master or slave):

`reads' = 1200 - 2 * `writes'

`reads' = 9 * `writes' / (N + 1) (reads are split, but writes
replicated to all slaves)

9 * `writes' / (N + 1) + 2 * `writes' = 1200

`writes' = 1200 / (2 + 9/(N + 1))

The last equation indicates the maximum number of writes for N slaves,
given a maximum possible read rate of 1,200 per second and a ratio of
nine reads per write.

This analysis yields the following conclusions:

   * If N = 0 (which means we have no replication), our system can
     handle about 1200/11 = 109 writes per second.

   * If N = 1, we get up to 184 writes per second.

   * If N = 8, we get up to 400 writes per second.

   * If N = 17, we get up to 480 writes per second.

   * Eventually, as N approaches infinity (and our budget negative
     infinity), we can get very close to 600 writes per second,
     increasing system throughput about 5.5 times. However, with only
     eight servers, we increase it nearly four times.

Note that these computations assume infinite network bandwidth and
neglect several other factors that could be significant on your system.
In many cases, you may not be able to perform a computation similar to
the one just shown that accurately predicts what will happen on your
system if you add N replication slaves. However, answering the
following questions should help you decide whether and by how much
replication will improve the performance of your system:

   * What is the read/write ratio on your system?

   * How much more write load can one server handle if you reduce the
     reads?

   * For how many slaves do you have bandwidth available on your
     network?

*B.13.9: ** How can I use replication to provide redundancy or high
availability?  *

How you implement redundancy is entirely dependent on your application
and circumstances. High-availability solutions (with automatic
failover) require active monitoring and either custom scripts or third
party tools to provide the failover support from the original MySQL
server to the slave.

To handle the process manually, you should be able to switch from a
failed master to a pre-configured slave by altering your application to
talk to the new server or by adjusting the DNS for the MySQL server
from the failed server to the new server.

For more information and some example solutions, see *Note
replication-solutions-switch::.

*B.13.10: ** How do I tell whether a master server is using
statement-based or row-based binary logging format?  *

Check the value of the `binlog_format' system variable:

     mysql> SHOW VARIABLES LIKE 'binlog_format';

The value shown will be one of `STATEMENT', `ROW', or `MIXED'. For
`MIXED' mode, row-based logging is preferred but replication switches
automatically to statement-based logging under certain conditions; for
information about when this may occur, see *Note binary-log-mixed::.

*B.13.11: ** How do I tell a slave to use row-based replication?  *

Slaves automatically know which format to use.

*B.13.12: ** How do I prevent *Note `GRANT': grant. and *Note `REVOKE':
revoke. statements from replicating to slave machines?  *

Start the server with the `--replicate-wild-ignore-table=mysql.%'
option to ignore replication for tables in the `mysql' database.

*B.13.13: ** Does replication work on mixed operating systems (for
example, the master runs on Linux while slaves run on Mac OS X and
Windows)?  *

Yes.

*B.13.14: ** Does replication work on mixed hardware architectures (for
example, the master runs on a 64-bit machine while slaves run on 32-bit
machines)?  *

Yes.


File: manual.info,  Node: faqs-thread-pool,  Prev: faqs-replication,  Up: faqs

B.14 MySQL 5.5 FAQ: MySQL Enterprise Scalability Thread Pool
============================================================

*Questions*
   * B.14.1: What is the Thread Pool and what problem does it solve?

   * B.14.2: How does the Thead Pool limit and manage concurrent
     sessions and transactions for optimal performance and throughput?

   * B.14.3: How is the Thread Pool different from the client side
     Connection Pool?

   * B.14.4: When should I use the Thread Pool?

   * B.14.5: Are there recommended Thread Pool configurations?

*Questions and Answers* *B.14.1: ** What is the Thread Pool and what
problem does it solve?  *

The MySQL Thread Pool is a MySQL server plugin that extends the default
connection-handling capabilities of the MySQL server to limit the
number of concurrently executing statements/queries and transactions to
ensure that each has sufficient CPU and memory resources to fulfill its
task. Commercial distributions of MySQL 5.5 and 5.6 include the Thread
Pool plugin.

The default thread-handling model in MySQL Server executes statements
using one thread per client connection. As more clients connect to the
server and execute statements, overall performance degrades. The Thread
Pool plugin provides an alternative thread-handling model designed to
reduce overhead and improve performance. The Thread Pool plugin
increases server performance by efficiently managing statement
execution threads for large numbers of client connections, especially
on modern multi-CPU/Core systems.

For more information, see *Note thread-pool-plugin::.

*B.14.2: ** How does the Thead Pool limit and manage concurrent
sessions and transactions for optimal performance and throughput?  *

The Thread Pool uses a `divide and conquer' approach to limiting and
balancing concurrency. Unlike the default connection handling of the
MySQL Server, the Thread Pool separates connections and threads, so
there is no fixed relationship between connections and the threads that
execute statements received from those connections. The Thread Pool then
manages client connections within configurable thread groups, where
they are prioritized and queued based on the nature of the work they
were submitted to accomplish.

For more information, see *Note thread-pool-operation::.

*B.14.3: ** How is the Thread Pool different from the client side
Connection Pool?  *

The MySQL Connection Pool operates on the client side to ensure that a
MySQL client does not constantly connect to and disconnect from the
MySQL server. It is designed to cache idle connections in the MySQL
client for use by other users as they are needed. This minimizes the
overhead and expense of establishing and tearing down connections as
queries are submitted to the MySQL server. The MySQL Connection Pool
has no visibility as to the query handling capabilities or load of the
backend MySQL server. By contrast, the Thread Pool operates on the
MySQL server side and is designed to manage the execution of inbound
concurrent connections and queries as they are received from the client
connections accessing the backend MySQL database. Because of the
separation of duties, the MySQL Connection Pool and Thread Pool are
orthogonal and can be used independent of each other.

MySQL Connection Pooling via the MySQL Connectors is covered in *Note
connectors-apis::.

*B.14.4: ** When should I use the Thread Pool?  *

There are a few rules of thumb to consider for optimal Thread Pool use
cases:

The MySQL `Threads_running' variable keeps track of the number of
concurrent statements currently executing in the MySQL Server. If this
variable consistently exceeds a region where the server won't operate
optimally (usually going beyond 40 for InnoDB workloads), the Thread
Pool will be beneficial, especially in extreme parallel overload
situations.

If you are using the `innodb_thread_concurrency' to limit the number of
concurrently executing statements, you will find the Thread Pool solves
the same problem, only better, by assigning connections to thread
groups, then queuing executions based on transactional content, user
defined designations, and so forth.

Lastly, if your workload comprises mainly short queries, the Thread
Pool will be beneficial.

To learn more, see *Note thread-pool-tuning::.

*B.14.5: ** Are there recommended Thread Pool configurations?  *

The Thread Pool has a number of user case driven configuration
parameters that affect its performance. To learn about these and tips
on tuning, see *Note thread-pool-tuning::.


File: manual.info,  Node: error-handling,  Next: news,  Prev: faqs,  Up: Top

Appendix C Errors, Error Codes, and Common Problems
***************************************************

* Menu:

* error-sources::                Sources of Error Information
* error-types::                  Types of Error Values
* error-messages-server::        Server Error Codes and Messages
* error-messages-client::        Client Error Codes and Messages
* problems::                     Problems and Common Errors

This appendix lists common problems and errors that may occur and
potential resolutions, in addition to listing the errors that may
appear when you call MySQL from any host language. The first section
covers problems and resolutions. Detailed information on errors is
provided: One list displays server error messages. Another list
displays client program messages.


File: manual.info,  Node: error-sources,  Next: error-types,  Prev: error-handling,  Up: error-handling

C.1 Sources of Error Information
================================

There are several sources of error information in MySQL:

   * Each SQL statement executed results in an error code, an SQLSTATE
     value, and an error message, as described in *Note error-types::.
     These errors are returned from the server side; see *Note
     error-messages-server::.

   * Errors can occur on the client side, usually involving problems
     communicating with the server; see *Note error-messages-client::.

   * SQL statement warning and error information is available through
     the *Note `SHOW WARNINGS': show-warnings. and *Note `SHOW ERRORS':
     show-errors. statements. The `warning_count' system variable
     indicates the number of errors, warnings, and notes. The
     `error_count' system variable indicates the number of errors. Its
     value excludes warnings and notes.

   * *Note `SHOW SLAVE STATUS': show-slave-status. statement output
     includes information about replication errors occurring on the
     slave side.

   * *Note `SHOW ENGINE INNODB STATUS': show-engine. statement output
     includes information about the most recent foreign key error if a
     *Note `CREATE TABLE': create-table. statement for an *Note
     `InnoDB': innodb-storage-engine. table fails.

   * The *Note `perror': perror. program provides information from the
     command line about error numbers. See *Note perror::.

Descriptions of server and client errors are provided later in this
Appendix. For information about errors related to *Note `InnoDB':
innodb-storage-engine, see *Note innodb-error-handling::.


File: manual.info,  Node: error-types,  Next: error-messages-server,  Prev: error-sources,  Up: error-handling

C.2 Types of Error Values
=========================

When an error occurs in MySQL, the server returns two types of error
values:

   * A MySQL-specific error code. This value is numeric. It is not
     portable to other database systems.

   * An SQLSTATE value. The value is a five-character string (for
     example, `'42S02''). The values are taken from ANSI SQL and ODBC
     and are more standardized.

A message string that provides a textual description of the error is
also available.

When an error occurs, the MySQL error code, SQLSTATE value, and message
string are available using C API functions:

   * MySQL error code: Call *Note `mysql_errno()': mysql-errno.

   * SQLSTATE value: Call *Note `mysql_sqlstate()': mysql-sqlstate.

   * Error message: Call *Note `mysql_error()': mysql-error.

For prepared statements, the corresponding error functions are *Note
`mysql_stmt_errno()': mysql-stmt-errno, *Note `mysql_stmt_sqlstate()':
mysql-stmt-sqlstate, and *Note `mysql_stmt_error()': mysql-stmt-error.
All error functions are described in *Note c-api::.

The number of errors, warnings, and notes for the previous statement
can be obtained by calling *Note `mysql_warning_count()':
mysql-warning-count. See *Note mysql-warning-count::.

The first two characters of an SQLSTATE value indicate the error class:

   * Class = `'00'' indicates success.

   * Class = `'01'' indicates a warning.

   * Class = `'02'' indicates `not found.' This is relevant within the
     context of cursors and is used to control what happens when a
     cursor reaches the end of a data set. This condition also occurs
     for `SELECT ... INTO VAR_LIST' statements that retrieve no rows.

   * Class > `'02'' indicates an exception.


File: manual.info,  Node: error-messages-server,  Next: error-messages-client,  Prev: error-types,  Up: error-handling

C.3 Server Error Codes and Messages
===================================

MySQL programs have access to several types of error information when
the server returns an error. For example, the *Note `mysql': mysql.
client program displays errors using the following format:

     shell> SELECT * FROM no_such_table;
     ERROR 1146 (42S02): Table 'test.no_such_table' doesn't exist

The message displayed contains three types of information:

   * A numeric error code (`1146'). This number is MySQL-specific and
     is not portable to other database systems.

   * A five-character SQLSTATE value (`'42S02'').  The values are taken
     from ANSI SQL and ODBC and are more standardized. Not all MySQL
     error numbers have corresponding SQLSTATE values. In these cases,
     `'HY000'' (general error) is used.

   * A message string that provides a textual description of the error.

For error checking, use error codes, not error messages. Error messages
do not change often, but it is possible. Also if the database
administrator changes the language setting, that affects the language
of error messages.

Error codes are stable across GA releases of a given MySQL series.
Before a series reaches GA status, new codes may still be under
development and subject to change.

Server error information comes from the following source files.  For
details about the way that error information is defined, see the MySQL
Internals Manual (http://dev.mysql.com/doc/internals/en).

   * Error message information is listed in the `share/errmsg.txt' file.
     `%d' and `%s' represent numbers and strings, respectively, that
     are substituted into the Message values when they are displayed.

   * The Error values listed in `share/errmsg.txt' are used to generate
     the definitions in the `include/mysqld_error.h' and
     `include/mysqld_ername.h' MySQL source files.

   * The SQLSTATE values listed in `share/errmsg.txt' are used to
     generate the definitions in the `include/sql_state.h' MySQL source
     file.

Because updates are frequent, it is possible that those files will
contain additional error information not listed here.

   *  Error: `1000' SQLSTATE: `HY000' (`ER_HASHCHK')

     Message: hashchk

   *  Error: `1001' SQLSTATE: `HY000' (`ER_NISAMCHK')

     Message: isamchk

   *  Error: `1002' SQLSTATE: `HY000' (`ER_NO')

     Message: NO

   *  Error: `1003' SQLSTATE: `HY000' (`ER_YES')

     Message: YES

   *  Error: `1004' SQLSTATE: `HY000' (`ER_CANT_CREATE_FILE')

     Message: Can't create file '%s' (errno: %d)

   *  Error: `1005' SQLSTATE: `HY000' (`ER_CANT_CREATE_TABLE')

     Message: Can't create table '%s' (errno: %d)

   *  Error: `1006' SQLSTATE: `HY000' (`ER_CANT_CREATE_DB')

     Message: Can't create database '%s' (errno: %d)

   *  Error: `1007' SQLSTATE: `HY000' (`ER_DB_CREATE_EXISTS')

     Message: Can't create database '%s'; database exists

   *  Error: `1008' SQLSTATE: `HY000' (`ER_DB_DROP_EXISTS')

     Message: Can't drop database '%s'; database doesn't exist

   *  Error: `1009' SQLSTATE: `HY000' (`ER_DB_DROP_DELETE')

     Message: Error dropping database (can't delete '%s', errno: %d)

   *  Error: `1010' SQLSTATE: `HY000' (`ER_DB_DROP_RMDIR')

     Message: Error dropping database (can't rmdir '%s', errno: %d)

   *  Error: `1011' SQLSTATE: `HY000' (`ER_CANT_DELETE_FILE')

     Message: Error on delete of '%s' (errno: %d)

   *  Error: `1012' SQLSTATE: `HY000' (`ER_CANT_FIND_SYSTEM_REC')

     Message: Can't read record in system table

   *  Error: `1013' SQLSTATE: `HY000' (`ER_CANT_GET_STAT')

     Message: Can't get status of '%s' (errno: %d)

   *  Error: `1014' SQLSTATE: `HY000' (`ER_CANT_GET_WD')

     Message: Can't get working directory (errno: %d)

   *  Error: `1015' SQLSTATE: `HY000' (`ER_CANT_LOCK')

     Message: Can't lock file (errno: %d)

   *  Error: `1016' SQLSTATE: `HY000' (`ER_CANT_OPEN_FILE')

     Message: Can't open file: '%s' (errno: %d)

   *  Error: `1017' SQLSTATE: `HY000' (`ER_FILE_NOT_FOUND')

     Message: Can't find file: '%s' (errno: %d)

   *  Error: `1018' SQLSTATE: `HY000' (`ER_CANT_READ_DIR')

     Message: Can't read dir of '%s' (errno: %d)

   *  Error: `1019' SQLSTATE: `HY000' (`ER_CANT_SET_WD')

     Message: Can't change dir to '%s' (errno: %d)

   *  Error: `1020' SQLSTATE: `HY000' (`ER_CHECKREAD')

     Message: Record has changed since last read in table '%s'

   *  Error: `1021' SQLSTATE: `HY000' (`ER_DISK_FULL')

     Message: Disk full (%s); waiting for someone to free some space...

   *  Error: `1022' SQLSTATE: `23000' (`ER_DUP_KEY')

     Message: Can't write; duplicate key in table '%s'

   *  Error: `1023' SQLSTATE: `HY000' (`ER_ERROR_ON_CLOSE')

     Message: Error on close of '%s' (errno: %d)

   *  Error: `1024' SQLSTATE: `HY000' (`ER_ERROR_ON_READ')

     Message: Error reading file '%s' (errno: %d)

   *  Error: `1025' SQLSTATE: `HY000' (`ER_ERROR_ON_RENAME')

     Message: Error on rename of '%s' to '%s' (errno: %d)

   *  Error: `1026' SQLSTATE: `HY000' (`ER_ERROR_ON_WRITE')

     Message: Error writing file '%s' (errno: %d)

   *  Error: `1027' SQLSTATE: `HY000' (`ER_FILE_USED')

     Message: '%s' is locked against change

   *  Error: `1028' SQLSTATE: `HY000' (`ER_FILSORT_ABORT')

     Message: Sort aborted

   *  Error: `1029' SQLSTATE: `HY000' (`ER_FORM_NOT_FOUND')

     Message: View '%s' doesn't exist for '%s'

   *  Error: `1030' SQLSTATE: `HY000' (`ER_GET_ERRNO')

     Message: Got error %d from storage engine

   *  Error: `1031' SQLSTATE: `HY000' (`ER_ILLEGAL_HA')

     Message: Table storage engine for '%s' doesn't have this option

   *  Error: `1032' SQLSTATE: `HY000' (`ER_KEY_NOT_FOUND')

     Message: Can't find record in '%s'

   *  Error: `1033' SQLSTATE: `HY000' (`ER_NOT_FORM_FILE')

     Message: Incorrect information in file: '%s'

   *  Error: `1034' SQLSTATE: `HY000' (`ER_NOT_KEYFILE')

     Message: Incorrect key file for table '%s'; try to repair it

   *  Error: `1035' SQLSTATE: `HY000' (`ER_OLD_KEYFILE')

     Message: Old key file for table '%s'; repair it!

   *  Error: `1036' SQLSTATE: `HY000' (`ER_OPEN_AS_READONLY')

     Message: Table '%s' is read only

   *  Error: `1037' SQLSTATE: `HY001' (`ER_OUTOFMEMORY')

     Message: Out of memory; restart server and try again (needed %d
     bytes)

   *  Error: `1038' SQLSTATE: `HY001' (`ER_OUT_OF_SORTMEMORY')

     Message: Out of sort memory, consider increasing server sort
     buffer size

   *  Error: `1039' SQLSTATE: `HY000' (`ER_UNEXPECTED_EOF')

     Message: Unexpected EOF found when reading file '%s' (errno: %d)

   *  Error: `1040' SQLSTATE: `08004' (`ER_CON_COUNT_ERROR')

     Message: Too many connections

   *  Error: `1041' SQLSTATE: `HY000' (`ER_OUT_OF_RESOURCES')

     Message: Out of memory; check if mysqld or some other process uses
     all available memory; if not, you may have to use 'ulimit' to
     allow mysqld to use more memory or you can add more swap space

   *  Error: `1042' SQLSTATE: `08S01' (`ER_BAD_HOST_ERROR')

     Message: Can't get hostname for your address

   *  Error: `1043' SQLSTATE: `08S01' (`ER_HANDSHAKE_ERROR')

     Message: Bad handshake

   *  Error: `1044' SQLSTATE: `42000' (`ER_DBACCESS_DENIED_ERROR')

     Message: Access denied for user '%s'@'%s' to database '%s'

   *  Error: `1045' SQLSTATE: `28000' (`ER_ACCESS_DENIED_ERROR')

     Message: Access denied for user '%s'@'%s' (using password: %s)

   *  Error: `1046' SQLSTATE: `3D000' (`ER_NO_DB_ERROR')

     Message: No database selected

   *  Error: `1047' SQLSTATE: `08S01' (`ER_UNKNOWN_COM_ERROR')

     Message: Unknown command

   *  Error: `1048' SQLSTATE: `23000' (`ER_BAD_NULL_ERROR')

     Message: Column '%s' cannot be null

   *  Error: `1049' SQLSTATE: `42000' (`ER_BAD_DB_ERROR')

     Message: Unknown database '%s'

   *  Error: `1050' SQLSTATE: `42S01' (`ER_TABLE_EXISTS_ERROR')

     Message: Table '%s' already exists

   *  Error: `1051' SQLSTATE: `42S02' (`ER_BAD_TABLE_ERROR')

     Message: Unknown table '%s'

   *  Error: `1052' SQLSTATE: `23000' (`ER_NON_UNIQ_ERROR')

     Message: Column '%s' in %s is ambiguous

   *  Error: `1053' SQLSTATE: `08S01' (`ER_SERVER_SHUTDOWN')

     Message: Server shutdown in progress

   *  Error: `1054' SQLSTATE: `42S22' (`ER_BAD_FIELD_ERROR')

     Message: Unknown column '%s' in '%s'

   *  Error: `1055' SQLSTATE: `42000' (`ER_WRONG_FIELD_WITH_GROUP')

     Message: '%s' isn't in GROUP BY

   *  Error: `1056' SQLSTATE: `42000' (`ER_WRONG_GROUP_FIELD')

     Message: Can't group on '%s'

   *  Error: `1057' SQLSTATE: `42000' (`ER_WRONG_SUM_SELECT')

     Message: Statement has sum functions and columns in same statement

   *  Error: `1058' SQLSTATE: `21S01' (`ER_WRONG_VALUE_COUNT')

     Message: Column count doesn't match value count

   *  Error: `1059' SQLSTATE: `42000' (`ER_TOO_LONG_IDENT')

     Message: Identifier name '%s' is too long

   *  Error: `1060' SQLSTATE: `42S21' (`ER_DUP_FIELDNAME')

     Message: Duplicate column name '%s'

   *  Error: `1061' SQLSTATE: `42000' (`ER_DUP_KEYNAME')

     Message: Duplicate key name '%s'

   *  Error: `1062' SQLSTATE: `23000' (`ER_DUP_ENTRY')

     Message: Duplicate entry '%s' for key %d

     The message returned with this error uses the format string for
     `ER_DUP_ENTRY_WITH_KEY_NAME'.

   *  Error: `1063' SQLSTATE: `42000' (`ER_WRONG_FIELD_SPEC')

     Message: Incorrect column specifier for column '%s'

   *  Error: `1064' SQLSTATE: `42000' (`ER_PARSE_ERROR')

     Message: %s near '%s' at line %d

   *  Error: `1065' SQLSTATE: `42000' (`ER_EMPTY_QUERY')

     Message: Query was empty

   *  Error: `1066' SQLSTATE: `42000' (`ER_NONUNIQ_TABLE')

     Message: Not unique table/alias: '%s'

   *  Error: `1067' SQLSTATE: `42000' (`ER_INVALID_DEFAULT')

     Message: Invalid default value for '%s'

   *  Error: `1068' SQLSTATE: `42000' (`ER_MULTIPLE_PRI_KEY')

     Message: Multiple primary key defined

   *  Error: `1069' SQLSTATE: `42000' (`ER_TOO_MANY_KEYS')

     Message: Too many keys specified; max %d keys allowed

   *  Error: `1070' SQLSTATE: `42000' (`ER_TOO_MANY_KEY_PARTS')

     Message: Too many key parts specified; max %d parts allowed

   *  Error: `1071' SQLSTATE: `42000' (`ER_TOO_LONG_KEY')

     Message: Specified key was too long; max key length is %d bytes

   *  Error: `1072' SQLSTATE: `42000' (`ER_KEY_COLUMN_DOES_NOT_EXITS')

     Message: Key column '%s' doesn't exist in table

   *  Error: `1073' SQLSTATE: `42000' (`ER_BLOB_USED_AS_KEY')

     Message: BLOB column '%s' can't be used in key specification with
     the used table type

   *  Error: `1074' SQLSTATE: `42000' (`ER_TOO_BIG_FIELDLENGTH')

     Message: Column length too big for column '%s' (max = %lu); use
     BLOB or TEXT instead

   *  Error: `1075' SQLSTATE: `42000' (`ER_WRONG_AUTO_KEY')

     Message: Incorrect table definition; there can be only one auto
     column and it must be defined as a key

   *  Error: `1076' SQLSTATE: `HY000' (`ER_READY')

     Message: %s: ready for connections. Version: '%s' socket: '%s'
     port: %d

   *  Error: `1077' SQLSTATE: `HY000' (`ER_NORMAL_SHUTDOWN')

     Message: %s: Normal shutdown

   *  Error: `1078' SQLSTATE: `HY000' (`ER_GOT_SIGNAL')

     Message: %s: Got signal %d. Aborting!

   *  Error: `1079' SQLSTATE: `HY000' (`ER_SHUTDOWN_COMPLETE')

     Message: %s: Shutdown complete

   *  Error: `1080' SQLSTATE: `08S01' (`ER_FORCING_CLOSE')

     Message: %s: Forcing close of thread %ld user: '%s'

   *  Error: `1081' SQLSTATE: `08S01' (`ER_IPSOCK_ERROR')

     Message: Can't create IP socket

   *  Error: `1082' SQLSTATE: `42S12' (`ER_NO_SUCH_INDEX')

     Message: Table '%s' has no index like the one used in CREATE
     INDEX; recreate the table

   *  Error: `1083' SQLSTATE: `42000' (`ER_WRONG_FIELD_TERMINATORS')

     Message: Field separator argument is not what is expected; check
     the manual

   *  Error: `1084' SQLSTATE: `42000' (`ER_BLOBS_AND_NO_TERMINATED')

     Message: You can't use fixed rowlength with BLOBs; please use
     'fields terminated by'

   *  Error: `1085' SQLSTATE: `HY000' (`ER_TEXTFILE_NOT_READABLE')

     Message: The file '%s' must be in the database directory or be
     readable by all

   *  Error: `1086' SQLSTATE: `HY000' (`ER_FILE_EXISTS_ERROR')

     Message: File '%s' already exists

   *  Error: `1087' SQLSTATE: `HY000' (`ER_LOAD_INFO')

     Message: Records: %ld Deleted: %ld Skipped: %ld Warnings: %ld

   *  Error: `1088' SQLSTATE: `HY000' (`ER_ALTER_INFO')

     Message: Records: %ld Duplicates: %ld

   *  Error: `1089' SQLSTATE: `HY000' (`ER_WRONG_SUB_KEY')

     Message: Incorrect prefix key; the used key part isn't a string,
     the used length is longer than the key part, or the storage engine
     doesn't support unique prefix keys

   *  Error: `1090' SQLSTATE: `42000' (`ER_CANT_REMOVE_ALL_FIELDS')

     Message: You can't delete all columns with ALTER TABLE; use DROP
     TABLE instead

   *  Error: `1091' SQLSTATE: `42000' (`ER_CANT_DROP_FIELD_OR_KEY')

     Message: Can't DROP '%s'; check that column/key exists

   *  Error: `1092' SQLSTATE: `HY000' (`ER_INSERT_INFO')

     Message: Records: %ld Duplicates: %ld Warnings: %ld

   *  Error: `1093' SQLSTATE: `HY000' (`ER_UPDATE_TABLE_USED')

     Message: You can't specify target table '%s' for update in FROM
     clause

   *  Error: `1094' SQLSTATE: `HY000' (`ER_NO_SUCH_THREAD')

     Message: Unknown thread id: %lu

   *  Error: `1095' SQLSTATE: `HY000' (`ER_KILL_DENIED_ERROR')

     Message: You are not owner of thread %lu

   *  Error: `1096' SQLSTATE: `HY000' (`ER_NO_TABLES_USED')

     Message: No tables used

   *  Error: `1097' SQLSTATE: `HY000' (`ER_TOO_BIG_SET')

     Message: Too many strings for column %s and SET

   *  Error: `1098' SQLSTATE: `HY000' (`ER_NO_UNIQUE_LOGFILE')

     Message: Can't generate a unique log-filename %s.(1-999)

   *  Error: `1099' SQLSTATE: `HY000' (`ER_TABLE_NOT_LOCKED_FOR_WRITE')

     Message: Table '%s' was locked with a READ lock and can't be
     updated

   *  Error: `1100' SQLSTATE: `HY000' (`ER_TABLE_NOT_LOCKED')

     Message: Table '%s' was not locked with LOCK TABLES

   *  Error: `1101' SQLSTATE: `42000' (`ER_BLOB_CANT_HAVE_DEFAULT')

     Message: BLOB/TEXT column '%s' can't have a default value

   *  Error: `1102' SQLSTATE: `42000' (`ER_WRONG_DB_NAME')

     Message: Incorrect database name '%s'

   *  Error: `1103' SQLSTATE: `42000' (`ER_WRONG_TABLE_NAME')

     Message: Incorrect table name '%s'

   *  Error: `1104' SQLSTATE: `42000' (`ER_TOO_BIG_SELECT')

     Message: The SELECT would examine more than MAX_JOIN_SIZE rows;
     check your WHERE and use SET SQL_BIG_SELECTS=1 or SET
     MAX_JOIN_SIZE=# if the SELECT is okay

   *  Error: `1105' SQLSTATE: `HY000' (`ER_UNKNOWN_ERROR')

     Message: Unknown error

   *  Error: `1106' SQLSTATE: `42000' (`ER_UNKNOWN_PROCEDURE')

     Message: Unknown procedure '%s'

   *  Error: `1107' SQLSTATE: `42000'
     (`ER_WRONG_PARAMCOUNT_TO_PROCEDURE')

     Message: Incorrect parameter count to procedure '%s'

   *  Error: `1108' SQLSTATE: `HY000'
     (`ER_WRONG_PARAMETERS_TO_PROCEDURE')

     Message: Incorrect parameters to procedure '%s'

   *  Error: `1109' SQLSTATE: `42S02' (`ER_UNKNOWN_TABLE')

     Message: Unknown table '%s' in %s

   *  Error: `1110' SQLSTATE: `42000' (`ER_FIELD_SPECIFIED_TWICE')

     Message: Column '%s' specified twice

   *  Error: `1111' SQLSTATE: `HY000' (`ER_INVALID_GROUP_FUNC_USE')

     Message: Invalid use of group function

   *  Error: `1112' SQLSTATE: `42000' (`ER_UNSUPPORTED_EXTENSION')

     Message: Table '%s' uses an extension that doesn't exist in this
     MySQL version

   *  Error: `1113' SQLSTATE: `42000' (`ER_TABLE_MUST_HAVE_COLUMNS')

     Message: A table must have at least 1 column

   *  Error: `1114' SQLSTATE: `HY000' (`ER_RECORD_FILE_FULL')

     Message: The table '%s' is full

   *  Error: `1115' SQLSTATE: `42000' (`ER_UNKNOWN_CHARACTER_SET')

     Message: Unknown character set: '%s'

   *  Error: `1116' SQLSTATE: `HY000' (`ER_TOO_MANY_TABLES')

     Message: Too many tables; MySQL can only use %d tables in a join

   *  Error: `1117' SQLSTATE: `HY000' (`ER_TOO_MANY_FIELDS')

     Message: Too many columns

   *  Error: `1118' SQLSTATE: `42000' (`ER_TOO_BIG_ROWSIZE')

     Message: Row size too large. The maximum row size for the used
     table type, not counting BLOBs, is %ld. You have to change some
     columns to TEXT or BLOBs

   *  Error: `1119' SQLSTATE: `HY000' (`ER_STACK_OVERRUN')

     Message: Thread stack overrun: Used: %ld of a %ld stack. Use
     'mysqld -thread_stack=#' to specify a bigger stack if needed

   *  Error: `1120' SQLSTATE: `42000' (`ER_WRONG_OUTER_JOIN')

     Message: Cross dependency found in OUTER JOIN; examine your ON
     conditions

   *  Error: `1121' SQLSTATE: `42000' (`ER_NULL_COLUMN_IN_INDEX')

     Message: Table handler doesn't support NULL in given index. Please
     change column '%s' to be NOT NULL or use another handler

   *  Error: `1122' SQLSTATE: `HY000' (`ER_CANT_FIND_UDF')

     Message: Can't load function '%s'

   *  Error: `1123' SQLSTATE: `HY000' (`ER_CANT_INITIALIZE_UDF')

     Message: Can't initialize function '%s'; %s

   *  Error: `1124' SQLSTATE: `HY000' (`ER_UDF_NO_PATHS')

     Message: No paths allowed for shared library

   *  Error: `1125' SQLSTATE: `HY000' (`ER_UDF_EXISTS')

     Message: Function '%s' already exists

   *  Error: `1126' SQLSTATE: `HY000' (`ER_CANT_OPEN_LIBRARY')

     Message: Can't open shared library '%s' (errno: %d %s)

   *  Error: `1127' SQLSTATE: `HY000' (`ER_CANT_FIND_DL_ENTRY')

     Message: Can't find symbol '%s' in library

   *  Error: `1128' SQLSTATE: `HY000' (`ER_FUNCTION_NOT_DEFINED')

     Message: Function '%s' is not defined

   *  Error: `1129' SQLSTATE: `HY000' (`ER_HOST_IS_BLOCKED')

     Message: Host '%s' is blocked because of many connection errors;
     unblock with 'mysqladmin flush-hosts'

   *  Error: `1130' SQLSTATE: `HY000' (`ER_HOST_NOT_PRIVILEGED')

     Message: Host '%s' is not allowed to connect to this MySQL server

   *  Error: `1131' SQLSTATE: `42000' (`ER_PASSWORD_ANONYMOUS_USER')

     Message: You are using MySQL as an anonymous user and anonymous
     users are not allowed to change passwords

   *  Error: `1132' SQLSTATE: `42000' (`ER_PASSWORD_NOT_ALLOWED')

     Message: You must have privileges to update tables in the mysql
     database to be able to change passwords for others

   *  Error: `1133' SQLSTATE: `42000' (`ER_PASSWORD_NO_MATCH')

     Message: Can't find any matching row in the user table

   *  Error: `1134' SQLSTATE: `HY000' (`ER_UPDATE_INFO')

     Message: Rows matched: %ld Changed: %ld Warnings: %ld

   *  Error: `1135' SQLSTATE: `HY000' (`ER_CANT_CREATE_THREAD')

     Message: Can't create a new thread (errno %d); if you are not out
     of available memory, you can consult the manual for a possible
     OS-dependent bug

   *  Error: `1136' SQLSTATE: `21S01' (`ER_WRONG_VALUE_COUNT_ON_ROW')

     Message: Column count doesn't match value count at row %ld

   *  Error: `1137' SQLSTATE: `HY000' (`ER_CANT_REOPEN_TABLE')

     Message: Can't reopen table: '%s'

   *  Error: `1138' SQLSTATE: `22004' (`ER_INVALID_USE_OF_NULL')

     Message: Invalid use of NULL value

   *  Error: `1139' SQLSTATE: `42000' (`ER_REGEXP_ERROR')

     Message: Got error '%s' from regexp

   *  Error: `1140' SQLSTATE: `42000'
     (`ER_MIX_OF_GROUP_FUNC_AND_FIELDS')

     Message: Mixing of GROUP columns (MIN(),MAX(),COUNT(),...) with no
     GROUP columns is illegal if there is no GROUP BY clause

   *  Error: `1141' SQLSTATE: `42000' (`ER_NONEXISTING_GRANT')

     Message: There is no such grant defined for user '%s' on host '%s'

   *  Error: `1142' SQLSTATE: `42000' (`ER_TABLEACCESS_DENIED_ERROR')

     Message: %s command denied to user '%s'@'%s' for table '%s'

   *  Error: `1143' SQLSTATE: `42000' (`ER_COLUMNACCESS_DENIED_ERROR')

     Message: %s command denied to user '%s'@'%s' for column '%s' in
     table '%s'

   *  Error: `1144' SQLSTATE: `42000' (`ER_ILLEGAL_GRANT_FOR_TABLE')

     Message: Illegal GRANT/REVOKE command; please consult the manual
     to see which privileges can be used

   *  Error: `1145' SQLSTATE: `42000' (`ER_GRANT_WRONG_HOST_OR_USER')

     Message: The host or user argument to GRANT is too long

   *  Error: `1146' SQLSTATE: `42S02' (`ER_NO_SUCH_TABLE')

     Message: Table '%s.%s' doesn't exist

   *  Error: `1147' SQLSTATE: `42000' (`ER_NONEXISTING_TABLE_GRANT')

     Message: There is no such grant defined for user '%s' on host '%s'
     on table '%s'

   *  Error: `1148' SQLSTATE: `42000' (`ER_NOT_ALLOWED_COMMAND')

     Message: The used command is not allowed with this MySQL version

   *  Error: `1149' SQLSTATE: `42000' (`ER_SYNTAX_ERROR')

     Message: You have an error in your SQL syntax; check the manual
     that corresponds to your MySQL server version for the right syntax
     to use

   *  Error: `1150' SQLSTATE: `HY000' (`ER_DELAYED_CANT_CHANGE_LOCK')

     Message: Delayed insert thread couldn't get requested lock for
     table %s

   *  Error: `1151' SQLSTATE: `HY000' (`ER_TOO_MANY_DELAYED_THREADS')

     Message: Too many delayed threads in use

   *  Error: `1152' SQLSTATE: `08S01' (`ER_ABORTING_CONNECTION')

     Message: Aborted connection %ld to db: '%s' user: '%s' (%s)

   *  Error: `1153' SQLSTATE: `08S01' (`ER_NET_PACKET_TOO_LARGE')

     Message: Got a packet bigger than 'max_allowed_packet' bytes

   *  Error: `1154' SQLSTATE: `08S01' (`ER_NET_READ_ERROR_FROM_PIPE')

     Message: Got a read error from the connection pipe

   *  Error: `1155' SQLSTATE: `08S01' (`ER_NET_FCNTL_ERROR')

     Message: Got an error from fcntl()

   *  Error: `1156' SQLSTATE: `08S01' (`ER_NET_PACKETS_OUT_OF_ORDER')

     Message: Got packets out of order

   *  Error: `1157' SQLSTATE: `08S01' (`ER_NET_UNCOMPRESS_ERROR')

     Message: Couldn't uncompress communication packet

   *  Error: `1158' SQLSTATE: `08S01' (`ER_NET_READ_ERROR')

     Message: Got an error reading communication packets

   *  Error: `1159' SQLSTATE: `08S01' (`ER_NET_READ_INTERRUPTED')

     Message: Got timeout reading communication packets

   *  Error: `1160' SQLSTATE: `08S01' (`ER_NET_ERROR_ON_WRITE')

     Message: Got an error writing communication packets

   *  Error: `1161' SQLSTATE: `08S01' (`ER_NET_WRITE_INTERRUPTED')

     Message: Got timeout writing communication packets

   *  Error: `1162' SQLSTATE: `42000' (`ER_TOO_LONG_STRING')

     Message: Result string is longer than 'max_allowed_packet' bytes

   *  Error: `1163' SQLSTATE: `42000' (`ER_TABLE_CANT_HANDLE_BLOB')

     Message: The used table type doesn't support BLOB/TEXT columns

   *  Error: `1164' SQLSTATE: `42000'
     (`ER_TABLE_CANT_HANDLE_AUTO_INCREMENT')

     Message: The used table type doesn't support AUTO_INCREMENT columns

   *  Error: `1165' SQLSTATE: `HY000' (`ER_DELAYED_INSERT_TABLE_LOCKED')

     Message: INSERT DELAYED can't be used with table '%s' because it
     is locked with LOCK TABLES

   *  Error: `1166' SQLSTATE: `42000' (`ER_WRONG_COLUMN_NAME')

     Message: Incorrect column name '%s'

   *  Error: `1167' SQLSTATE: `42000' (`ER_WRONG_KEY_COLUMN')

     Message: The used storage engine can't index column '%s'

   *  Error: `1168' SQLSTATE: `HY000' (`ER_WRONG_MRG_TABLE')

     Message: Unable to open underlying table which is differently
     defined or of non-MyISAM type or doesn't exist

   *  Error: `1169' SQLSTATE: `23000' (`ER_DUP_UNIQUE')

     Message: Can't write, because of unique constraint, to table '%s'

   *  Error: `1170' SQLSTATE: `42000' (`ER_BLOB_KEY_WITHOUT_LENGTH')

     Message: BLOB/TEXT column '%s' used in key specification without a
     key length

   *  Error: `1171' SQLSTATE: `42000' (`ER_PRIMARY_CANT_HAVE_NULL')

     Message: All parts of a PRIMARY KEY must be NOT NULL; if you need
     NULL in a key, use UNIQUE instead

   *  Error: `1172' SQLSTATE: `42000' (`ER_TOO_MANY_ROWS')

     Message: Result consisted of more than one row

   *  Error: `1173' SQLSTATE: `42000' (`ER_REQUIRES_PRIMARY_KEY')

     Message: This table type requires a primary key

   *  Error: `1174' SQLSTATE: `HY000' (`ER_NO_RAID_COMPILED')

     Message: This version of MySQL is not compiled with RAID support

   *  Error: `1175' SQLSTATE: `HY000'
     (`ER_UPDATE_WITHOUT_KEY_IN_SAFE_MODE')

     Message: You are using safe update mode and you tried to update a
     table without a WHERE that uses a KEY column

   *  Error: `1176' SQLSTATE: `42000' (`ER_KEY_DOES_NOT_EXITS')

     Message: Key '%s' doesn't exist in table '%s'

   *  Error: `1177' SQLSTATE: `42000' (`ER_CHECK_NO_SUCH_TABLE')

     Message: Can't open table

   *  Error: `1178' SQLSTATE: `42000' (`ER_CHECK_NOT_IMPLEMENTED')

     Message: The storage engine for the table doesn't support %s

   *  Error: `1179' SQLSTATE: `25000'
     (`ER_CANT_DO_THIS_DURING_AN_TRANSACTION')

     Message: You are not allowed to execute this command in a
     transaction

   *  Error: `1180' SQLSTATE: `HY000' (`ER_ERROR_DURING_COMMIT')

     Message: Got error %d during COMMIT

   *  Error: `1181' SQLSTATE: `HY000' (`ER_ERROR_DURING_ROLLBACK')

     Message: Got error %d during ROLLBACK

   *  Error: `1182' SQLSTATE: `HY000' (`ER_ERROR_DURING_FLUSH_LOGS')

     Message: Got error %d during FLUSH_LOGS

   *  Error: `1183' SQLSTATE: `HY000' (`ER_ERROR_DURING_CHECKPOINT')

     Message: Got error %d during CHECKPOINT

   *  Error: `1184' SQLSTATE: `08S01' (`ER_NEW_ABORTING_CONNECTION')

     Message: Aborted connection %ld to db: '%s' user: '%s' host: '%s'
     (%s)

   *  Error: `1185' SQLSTATE: `HY000' (`ER_DUMP_NOT_IMPLEMENTED')

     Message: The storage engine for the table does not support binary
     table dump

   *  Error: `1186' SQLSTATE: `HY000' (`ER_FLUSH_MASTER_BINLOG_CLOSED')

     Message: Binlog closed, cannot RESET MASTER

   *  Error: `1187' SQLSTATE: `HY000' (`ER_INDEX_REBUILD')

     Message: Failed rebuilding the index of dumped table '%s'

   *  Error: `1188' SQLSTATE: `HY000' (`ER_MASTER')

     Message: Error from master: '%s'

   *  Error: `1189' SQLSTATE: `08S01' (`ER_MASTER_NET_READ')

     Message: Net error reading from master

   *  Error: `1190' SQLSTATE: `08S01' (`ER_MASTER_NET_WRITE')

     Message: Net error writing to master

   *  Error: `1191' SQLSTATE: `HY000' (`ER_FT_MATCHING_KEY_NOT_FOUND')

     Message: Can't find FULLTEXT index matching the column list

   *  Error: `1192' SQLSTATE: `HY000' (`ER_LOCK_OR_ACTIVE_TRANSACTION')

     Message: Can't execute the given command because you have active
     locked tables or an active transaction

   *  Error: `1193' SQLSTATE: `HY000' (`ER_UNKNOWN_SYSTEM_VARIABLE')

     Message: Unknown system variable '%s'

   *  Error: `1194' SQLSTATE: `HY000' (`ER_CRASHED_ON_USAGE')

     Message: Table '%s' is marked as crashed and should be repaired

   *  Error: `1195' SQLSTATE: `HY000' (`ER_CRASHED_ON_REPAIR')

     Message: Table '%s' is marked as crashed and last (automatic?)
     repair failed

   *  Error: `1196' SQLSTATE: `HY000'
     (`ER_WARNING_NOT_COMPLETE_ROLLBACK')

     Message: Some non-transactional changed tables couldn't be rolled
     back

   *  Error: `1197' SQLSTATE: `HY000' (`ER_TRANS_CACHE_FULL')

     Message: Multi-statement transaction required more than
     'max_binlog_cache_size' bytes of storage; increase this mysqld
     variable and try again

   *  Error: `1198' SQLSTATE: `HY000' (`ER_SLAVE_MUST_STOP')

     Message: This operation cannot be performed with a running slave;
     run STOP SLAVE first

   *  Error: `1199' SQLSTATE: `HY000' (`ER_SLAVE_NOT_RUNNING')

     Message: This operation requires a running slave; configure slave
     and do START SLAVE

   *  Error: `1200' SQLSTATE: `HY000' (`ER_BAD_SLAVE')

     Message: The server is not configured as slave; fix in config file
     or with CHANGE MASTER TO

   *  Error: `1201' SQLSTATE: `HY000' (`ER_MASTER_INFO')

     Message: Could not initialize master info structure; more error
     messages can be found in the MySQL error log

   *  Error: `1202' SQLSTATE: `HY000' (`ER_SLAVE_THREAD')

     Message: Could not create slave thread; check system resources

   *  Error: `1203' SQLSTATE: `42000' (`ER_TOO_MANY_USER_CONNECTIONS')

     Message: User %s already has more than 'max_user_connections'
     active connections

   *  Error: `1204' SQLSTATE: `HY000' (`ER_SET_CONSTANTS_ONLY')

     Message: You may only use constant expressions with SET

   *  Error: `1205' SQLSTATE: `HY000' (`ER_LOCK_WAIT_TIMEOUT')

     Message: Lock wait timeout exceeded; try restarting transaction

   *  Error: `1206' SQLSTATE: `HY000' (`ER_LOCK_TABLE_FULL')

     Message: The total number of locks exceeds the lock table size

   *  Error: `1207' SQLSTATE: `25000' (`ER_READ_ONLY_TRANSACTION')

     Message: Update locks cannot be acquired during a READ UNCOMMITTED
     transaction

   *  Error: `1208' SQLSTATE: `HY000' (`ER_DROP_DB_WITH_READ_LOCK')

     Message: DROP DATABASE not allowed while thread is holding global
     read lock

   *  Error: `1209' SQLSTATE: `HY000' (`ER_CREATE_DB_WITH_READ_LOCK')

     Message: CREATE DATABASE not allowed while thread is holding
     global read lock

   *  Error: `1210' SQLSTATE: `HY000' (`ER_WRONG_ARGUMENTS')

     Message: Incorrect arguments to %s

   *  Error: `1211' SQLSTATE: `42000'
     (`ER_NO_PERMISSION_TO_CREATE_USER')

     Message: '%s'@'%s' is not allowed to create new users

   *  Error: `1212' SQLSTATE: `HY000'
     (`ER_UNION_TABLES_IN_DIFFERENT_DIR')

     Message: Incorrect table definition; all MERGE tables must be in
     the same database

   *  Error: `1213' SQLSTATE: `40001' (`ER_LOCK_DEADLOCK')

     Message: Deadlock found when trying to get lock; try restarting
     transaction

   *  Error: `1214' SQLSTATE: `HY000' (`ER_TABLE_CANT_HANDLE_FT')

     Message: The used table type doesn't support FULLTEXT indexes

   *  Error: `1215' SQLSTATE: `HY000' (`ER_CANNOT_ADD_FOREIGN')

     Message: Cannot add foreign key constraint

   *  Error: `1216' SQLSTATE: `23000' (`ER_NO_REFERENCED_ROW')

     Message: Cannot add or update a child row: a foreign key
     constraint fails

   *  Error: `1217' SQLSTATE: `23000' (`ER_ROW_IS_REFERENCED')

     Message: Cannot delete or update a parent row: a foreign key
     constraint fails

   *  Error: `1218' SQLSTATE: `08S01' (`ER_CONNECT_TO_MASTER')

     Message: Error connecting to master: %s

   *  Error: `1219' SQLSTATE: `HY000' (`ER_QUERY_ON_MASTER')

     Message: Error running query on master: %s

   *  Error: `1220' SQLSTATE: `HY000'
     (`ER_ERROR_WHEN_EXECUTING_COMMAND')

     Message: Error when executing command %s: %s

   *  Error: `1221' SQLSTATE: `HY000' (`ER_WRONG_USAGE')

     Message: Incorrect usage of %s and %s

   *  Error: `1222' SQLSTATE: `21000'
     (`ER_WRONG_NUMBER_OF_COLUMNS_IN_SELECT')

     Message: The used SELECT statements have a different number of
     columns

   *  Error: `1223' SQLSTATE: `HY000' (`ER_CANT_UPDATE_WITH_READLOCK')

     Message: Can't execute the query because you have a conflicting
     read lock

   *  Error: `1224' SQLSTATE: `HY000' (`ER_MIXING_NOT_ALLOWED')

     Message: Mixing of transactional and non-transactional tables is
     disabled

   *  Error: `1225' SQLSTATE: `HY000' (`ER_DUP_ARGUMENT')

     Message: Option '%s' used twice in statement

   *  Error: `1226' SQLSTATE: `42000' (`ER_USER_LIMIT_REACHED')

     Message: User '%s' has exceeded the '%s' resource (current value:
     %ld)

   *  Error: `1227' SQLSTATE: `42000'
     (`ER_SPECIFIC_ACCESS_DENIED_ERROR')

     Message: Access denied; you need (at least one of) the %s
     privilege(s) for this operation

   *  Error: `1228' SQLSTATE: `HY000' (`ER_LOCAL_VARIABLE')

     Message: Variable '%s' is a SESSION variable and can't be used
     with SET GLOBAL

   *  Error: `1229' SQLSTATE: `HY000' (`ER_GLOBAL_VARIABLE')

     Message: Variable '%s' is a GLOBAL variable and should be set with
     SET GLOBAL

   *  Error: `1230' SQLSTATE: `42000' (`ER_NO_DEFAULT')

     Message: Variable '%s' doesn't have a default value

   *  Error: `1231' SQLSTATE: `42000' (`ER_WRONG_VALUE_FOR_VAR')

     Message: Variable '%s' can't be set to the value of '%s'

   *  Error: `1232' SQLSTATE: `42000' (`ER_WRONG_TYPE_FOR_VAR')

     Message: Incorrect argument type to variable '%s'

   *  Error: `1233' SQLSTATE: `HY000' (`ER_VAR_CANT_BE_READ')

     Message: Variable '%s' can only be set, not read

   *  Error: `1234' SQLSTATE: `42000' (`ER_CANT_USE_OPTION_HERE')

     Message: Incorrect usage/placement of '%s'

   *  Error: `1235' SQLSTATE: `42000' (`ER_NOT_SUPPORTED_YET')

     Message: This version of MySQL doesn't yet support '%s'

   *  Error: `1236' SQLSTATE: `HY000'
     (`ER_MASTER_FATAL_ERROR_READING_BINLOG')

     Message: Got fatal error %d from master when reading data from
     binary log: '%s'

   *  Error: `1237' SQLSTATE: `HY000' (`ER_SLAVE_IGNORED_TABLE')

     Message: Slave SQL thread ignored the query because of
     replicate-*-table rules

   *  Error: `1238' SQLSTATE: `HY000' (`ER_INCORRECT_GLOBAL_LOCAL_VAR')

     Message: Variable '%s' is a %s variable

   *  Error: `1239' SQLSTATE: `42000' (`ER_WRONG_FK_DEF')

     Message: Incorrect foreign key definition for '%s': %s

   *  Error: `1240' SQLSTATE: `HY000'
     (`ER_KEY_REF_DO_NOT_MATCH_TABLE_REF')

     Message: Key reference and table reference don't match

   *  Error: `1241' SQLSTATE: `21000' (`ER_OPERAND_COLUMNS')

     Message: Operand should contain %d column(s)

   *  Error: `1242' SQLSTATE: `21000' (`ER_SUBQUERY_NO_1_ROW')

     Message: Subquery returns more than 1 row

   *  Error: `1243' SQLSTATE: `HY000' (`ER_UNKNOWN_STMT_HANDLER')

     Message: Unknown prepared statement handler (%.*s) given to %s

   *  Error: `1244' SQLSTATE: `HY000' (`ER_CORRUPT_HELP_DB')

     Message: Help database is corrupt or does not exist

   *  Error: `1245' SQLSTATE: `HY000' (`ER_CYCLIC_REFERENCE')

     Message: Cyclic reference on subqueries

   *  Error: `1246' SQLSTATE: `HY000' (`ER_AUTO_CONVERT')

     Message: Converting column '%s' from %s to %s

   *  Error: `1247' SQLSTATE: `42S22' (`ER_ILLEGAL_REFERENCE')

     Message: Reference '%s' not supported (%s)

   *  Error: `1248' SQLSTATE: `42000' (`ER_DERIVED_MUST_HAVE_ALIAS')

     Message: Every derived table must have its own alias

   *  Error: `1249' SQLSTATE: `01000' (`ER_SELECT_REDUCED')

     Message: Select %u was reduced during optimization

   *  Error: `1250' SQLSTATE: `42000' (`ER_TABLENAME_NOT_ALLOWED_HERE')

     Message: Table '%s' from one of the SELECTs cannot be used in %s

   *  Error: `1251' SQLSTATE: `08004' (`ER_NOT_SUPPORTED_AUTH_MODE')

     Message: Client does not support authentication protocol requested
     by server; consider upgrading MySQL client

   *  Error: `1252' SQLSTATE: `42000' (`ER_SPATIAL_CANT_HAVE_NULL')

     Message: All parts of a SPATIAL index must be NOT NULL

   *  Error: `1253' SQLSTATE: `42000' (`ER_COLLATION_CHARSET_MISMATCH')

     Message: COLLATION '%s' is not valid for CHARACTER SET '%s'

   *  Error: `1254' SQLSTATE: `HY000' (`ER_SLAVE_WAS_RUNNING')

     Message: Slave is already running

   *  Error: `1255' SQLSTATE: `HY000' (`ER_SLAVE_WAS_NOT_RUNNING')

     Message: Slave already has been stopped

   *  Error: `1256' SQLSTATE: `HY000' (`ER_TOO_BIG_FOR_UNCOMPRESS')

     Message: Uncompressed data size too large; the maximum size is %d
     (probably, length of uncompressed data was corrupted)

   *  Error: `1257' SQLSTATE: `HY000' (`ER_ZLIB_Z_MEM_ERROR')

     Message: ZLIB: Not enough memory

   *  Error: `1258' SQLSTATE: `HY000' (`ER_ZLIB_Z_BUF_ERROR')

     Message: ZLIB: Not enough room in the output buffer (probably,
     length of uncompressed data was corrupted)

   *  Error: `1259' SQLSTATE: `HY000' (`ER_ZLIB_Z_DATA_ERROR')

     Message: ZLIB: Input data corrupted

   *  Error: `1260' SQLSTATE: `HY000' (`ER_CUT_VALUE_GROUP_CONCAT')

     Message: Row %u was cut by GROUP_CONCAT()

   *  Error: `1261' SQLSTATE: `01000' (`ER_WARN_TOO_FEW_RECORDS')

     Message: Row %ld doesn't contain data for all columns

   *  Error: `1262' SQLSTATE: `01000' (`ER_WARN_TOO_MANY_RECORDS')

     Message: Row %ld was truncated; it contained more data than there
     were input columns

   *  Error: `1263' SQLSTATE: `22004' (`ER_WARN_NULL_TO_NOTNULL')

     Message: Column set to default value; NULL supplied to NOT NULL
     column '%s' at row %ld

   *  Error: `1264' SQLSTATE: `22003' (`ER_WARN_DATA_OUT_OF_RANGE')

     Message: Out of range value for column '%s' at row %ld

   *  Error: `1265' SQLSTATE: `01000' (`WARN_DATA_TRUNCATED')

     Message: Data truncated for column '%s' at row %ld

   *  Error: `1266' SQLSTATE: `HY000' (`ER_WARN_USING_OTHER_HANDLER')

     Message: Using storage engine %s for table '%s'

   *  Error: `1267' SQLSTATE: `HY000' (`ER_CANT_AGGREGATE_2COLLATIONS')

     Message: Illegal mix of collations (%s,%s) and (%s,%s) for
     operation '%s'

   *  Error: `1268' SQLSTATE: `HY000' (`ER_DROP_USER')

     Message: Cannot drop one or more of the requested users

   *  Error: `1269' SQLSTATE: `HY000' (`ER_REVOKE_GRANTS')

     Message: Can't revoke all privileges for one or more of the
     requested users

   *  Error: `1270' SQLSTATE: `HY000' (`ER_CANT_AGGREGATE_3COLLATIONS')

     Message: Illegal mix of collations (%s,%s), (%s,%s), (%s,%s) for
     operation '%s'

   *  Error: `1271' SQLSTATE: `HY000' (`ER_CANT_AGGREGATE_NCOLLATIONS')

     Message: Illegal mix of collations for operation '%s'

   *  Error: `1272' SQLSTATE: `HY000' (`ER_VARIABLE_IS_NOT_STRUCT')

     Message: Variable '%s' is not a variable component (can't be used
     as XXXX.variable_name)

   *  Error: `1273' SQLSTATE: `HY000' (`ER_UNKNOWN_COLLATION')

     Message: Unknown collation: '%s'

   *  Error: `1274' SQLSTATE: `HY000' (`ER_SLAVE_IGNORED_SSL_PARAMS')

     Message: SSL parameters in CHANGE MASTER are ignored because this
     MySQL slave was compiled without SSL support; they can be used
     later if MySQL slave with SSL is started

   *  Error: `1275' SQLSTATE: `HY000'
     (`ER_SERVER_IS_IN_SECURE_AUTH_MODE')

     Message: Server is running in -secure-auth mode, but '%s'@'%s' has
     a password in the old format; please change the password to the
     new format

   *  Error: `1276' SQLSTATE: `HY000' (`ER_WARN_FIELD_RESOLVED')

     Message: Field or reference '%s%s%s%s%s' of SELECT #%d was
     resolved in SELECT #%d

   *  Error: `1277' SQLSTATE: `HY000' (`ER_BAD_SLAVE_UNTIL_COND')

     Message: Incorrect parameter or combination of parameters for
     START SLAVE UNTIL

   *  Error: `1278' SQLSTATE: `HY000' (`ER_MISSING_SKIP_SLAVE')

     Message: It is recommended to use -skip-slave-start when doing
     step-by-step replication with START SLAVE UNTIL; otherwise, you
     will get problems if you get an unexpected slave's mysqld restart

   *  Error: `1279' SQLSTATE: `HY000' (`ER_UNTIL_COND_IGNORED')

     Message: SQL thread is not to be started so UNTIL options are
     ignored

   *  Error: `1280' SQLSTATE: `42000' (`ER_WRONG_NAME_FOR_INDEX')

     Message: Incorrect index name '%s'

   *  Error: `1281' SQLSTATE: `42000' (`ER_WRONG_NAME_FOR_CATALOG')

     Message: Incorrect catalog name '%s'

   *  Error: `1282' SQLSTATE: `HY000' (`ER_WARN_QC_RESIZE')

     Message: Query cache failed to set size %lu; new query cache size
     is %lu

   *  Error: `1283' SQLSTATE: `HY000' (`ER_BAD_FT_COLUMN')

     Message: Column '%s' cannot be part of FULLTEXT index

   *  Error: `1284' SQLSTATE: `HY000' (`ER_UNKNOWN_KEY_CACHE')

     Message: Unknown key cache '%s'

   *  Error: `1285' SQLSTATE: `HY000' (`ER_WARN_HOSTNAME_WONT_WORK')

     Message: MySQL is started in -skip-name-resolve mode; you must
     restart it without this switch for this grant to work

   *  Error: `1286' SQLSTATE: `42000' (`ER_UNKNOWN_STORAGE_ENGINE')

     Message: Unknown storage engine '%s'

   *  Error: `1287' SQLSTATE: `HY000' (`ER_WARN_DEPRECATED_SYNTAX')

     Message: '%s' is deprecated and will be removed in a future
     release. Please use %s instead

   *  Error: `1288' SQLSTATE: `HY000' (`ER_NON_UPDATABLE_TABLE')

     Message: The target table %s of the %s is not updatable

   *  Error: `1289' SQLSTATE: `HY000' (`ER_FEATURE_DISABLED')

     Message: The '%s' feature is disabled; you need MySQL built with
     '%s' to have it working

   *  Error: `1290' SQLSTATE: `HY000' (`ER_OPTION_PREVENTS_STATEMENT')

     Message: The MySQL server is running with the %s option so it
     cannot execute this statement

   *  Error: `1291' SQLSTATE: `HY000' (`ER_DUPLICATED_VALUE_IN_TYPE')

     Message: Column '%s' has duplicated value '%s' in %s

   *  Error: `1292' SQLSTATE: `22007' (`ER_TRUNCATED_WRONG_VALUE')

     Message: Truncated incorrect %s value: '%s'

   *  Error: `1293' SQLSTATE: `HY000'
     (`ER_TOO_MUCH_AUTO_TIMESTAMP_COLS')

     Message: Incorrect table definition; there can be only one
     TIMESTAMP column with CURRENT_TIMESTAMP in DEFAULT or ON UPDATE
     clause

   *  Error: `1294' SQLSTATE: `HY000' (`ER_INVALID_ON_UPDATE')

     Message: Invalid ON UPDATE clause for '%s' column

   *  Error: `1295' SQLSTATE: `HY000' (`ER_UNSUPPORTED_PS')

     Message: This command is not supported in the prepared statement
     protocol yet

   *  Error: `1296' SQLSTATE: `HY000' (`ER_GET_ERRMSG')

     Message: Got error %d '%s' from %s

   *  Error: `1297' SQLSTATE: `HY000' (`ER_GET_TEMPORARY_ERRMSG')

     Message: Got temporary error %d '%s' from %s

   *  Error: `1298' SQLSTATE: `HY000' (`ER_UNKNOWN_TIME_ZONE')

     Message: Unknown or incorrect time zone: '%s'

   *  Error: `1299' SQLSTATE: `HY000' (`ER_WARN_INVALID_TIMESTAMP')

     Message: Invalid TIMESTAMP value in column '%s' at row %ld

   *  Error: `1300' SQLSTATE: `HY000' (`ER_INVALID_CHARACTER_STRING')

     Message: Invalid %s character string: '%s'

   *  Error: `1301' SQLSTATE: `HY000'
     (`ER_WARN_ALLOWED_PACKET_OVERFLOWED')

     Message: Result of %s() was larger than max_allowed_packet (%ld) -
     truncated

   *  Error: `1302' SQLSTATE: `HY000' (`ER_CONFLICTING_DECLARATIONS')

     Message: Conflicting declarations: '%s%s' and '%s%s'

   *  Error: `1303' SQLSTATE: `2F003' (`ER_SP_NO_RECURSIVE_CREATE')

     Message: Can't create a %s from within another stored routine

   *  Error: `1304' SQLSTATE: `42000' (`ER_SP_ALREADY_EXISTS')

     Message: %s %s already exists

   *  Error: `1305' SQLSTATE: `42000' (`ER_SP_DOES_NOT_EXIST')

     Message: %s %s does not exist

   *  Error: `1306' SQLSTATE: `HY000' (`ER_SP_DROP_FAILED')

     Message: Failed to DROP %s %s

   *  Error: `1307' SQLSTATE: `HY000' (`ER_SP_STORE_FAILED')

     Message: Failed to CREATE %s %s

   *  Error: `1308' SQLSTATE: `42000' (`ER_SP_LILABEL_MISMATCH')

     Message: %s with no matching label: %s

   *  Error: `1309' SQLSTATE: `42000' (`ER_SP_LABEL_REDEFINE')

     Message: Redefining label %s

   *  Error: `1310' SQLSTATE: `42000' (`ER_SP_LABEL_MISMATCH')

     Message: End-label %s without match

   *  Error: `1311' SQLSTATE: `01000' (`ER_SP_UNINIT_VAR')

     Message: Referring to uninitialized variable %s

   *  Error: `1312' SQLSTATE: `0A000' (`ER_SP_BADSELECT')

     Message: PROCEDURE %s can't return a result set in the given
     context

   *  Error: `1313' SQLSTATE: `42000' (`ER_SP_BADRETURN')

     Message: RETURN is only allowed in a FUNCTION

   *  Error: `1314' SQLSTATE: `0A000' (`ER_SP_BADSTATEMENT')

     Message: %s is not allowed in stored procedures

   *  Error: `1315' SQLSTATE: `42000'
     (`ER_UPDATE_LOG_DEPRECATED_IGNORED')

     Message: The update log is deprecated and replaced by the binary
     log; SET SQL_LOG_UPDATE has been ignored. This option will be
     removed in MySQL 5.6.

   *  Error: `1316' SQLSTATE: `42000'
     (`ER_UPDATE_LOG_DEPRECATED_TRANSLATED')

     Message: The update log is deprecated and replaced by the binary
     log; SET SQL_LOG_UPDATE has been translated to SET SQL_LOG_BIN.
     This option will be removed in MySQL 5.6.

   *  Error: `1317' SQLSTATE: `70100' (`ER_QUERY_INTERRUPTED')

     Message: Query execution was interrupted

   *  Error: `1318' SQLSTATE: `42000' (`ER_SP_WRONG_NO_OF_ARGS')

     Message: Incorrect number of arguments for %s %s; expected %u, got
     %u

   *  Error: `1319' SQLSTATE: `42000' (`ER_SP_COND_MISMATCH')

     Message: Undefined CONDITION: %s

   *  Error: `1320' SQLSTATE: `42000' (`ER_SP_NORETURN')

     Message: No RETURN found in FUNCTION %s

   *  Error: `1321' SQLSTATE: `2F005' (`ER_SP_NORETURNEND')

     Message: FUNCTION %s ended without RETURN

   *  Error: `1322' SQLSTATE: `42000' (`ER_SP_BAD_CURSOR_QUERY')

     Message: Cursor statement must be a SELECT

   *  Error: `1323' SQLSTATE: `42000' (`ER_SP_BAD_CURSOR_SELECT')

     Message: Cursor SELECT must not have INTO

   *  Error: `1324' SQLSTATE: `42000' (`ER_SP_CURSOR_MISMATCH')

     Message: Undefined CURSOR: %s

   *  Error: `1325' SQLSTATE: `24000' (`ER_SP_CURSOR_ALREADY_OPEN')

     Message: Cursor is already open

   *  Error: `1326' SQLSTATE: `24000' (`ER_SP_CURSOR_NOT_OPEN')

     Message: Cursor is not open

   *  Error: `1327' SQLSTATE: `42000' (`ER_SP_UNDECLARED_VAR')

     Message: Undeclared variable: %s

   *  Error: `1328' SQLSTATE: `HY000' (`ER_SP_WRONG_NO_OF_FETCH_ARGS')

     Message: Incorrect number of FETCH variables

   *  Error: `1329' SQLSTATE: `02000' (`ER_SP_FETCH_NO_DATA')

     Message: No data - zero rows fetched, selected, or processed

   *  Error: `1330' SQLSTATE: `42000' (`ER_SP_DUP_PARAM')

     Message: Duplicate parameter: %s

   *  Error: `1331' SQLSTATE: `42000' (`ER_SP_DUP_VAR')

     Message: Duplicate variable: %s

   *  Error: `1332' SQLSTATE: `42000' (`ER_SP_DUP_COND')

     Message: Duplicate condition: %s

   *  Error: `1333' SQLSTATE: `42000' (`ER_SP_DUP_CURS')

     Message: Duplicate cursor: %s

   *  Error: `1334' SQLSTATE: `HY000' (`ER_SP_CANT_ALTER')

     Message: Failed to ALTER %s %s

   *  Error: `1335' SQLSTATE: `0A000' (`ER_SP_SUBSELECT_NYI')

     Message: Subquery value not supported

   *  Error: `1336' SQLSTATE: `0A000'
     (`ER_STMT_NOT_ALLOWED_IN_SF_OR_TRG')

     Message: %s is not allowed in stored function or trigger

   *  Error: `1337' SQLSTATE: `42000' (`ER_SP_VARCOND_AFTER_CURSHNDLR')

     Message: Variable or condition declaration after cursor or handler
     declaration

   *  Error: `1338' SQLSTATE: `42000' (`ER_SP_CURSOR_AFTER_HANDLER')

     Message: Cursor declaration after handler declaration

   *  Error: `1339' SQLSTATE: `20000' (`ER_SP_CASE_NOT_FOUND')

     Message: Case not found for CASE statement

   *  Error: `1340' SQLSTATE: `HY000' (`ER_FPARSER_TOO_BIG_FILE')

     Message: Configuration file '%s' is too big

   *  Error: `1341' SQLSTATE: `HY000' (`ER_FPARSER_BAD_HEADER')

     Message: Malformed file type header in file '%s'

   *  Error: `1342' SQLSTATE: `HY000' (`ER_FPARSER_EOF_IN_COMMENT')

     Message: Unexpected end of file while parsing comment '%s'

   *  Error: `1343' SQLSTATE: `HY000' (`ER_FPARSER_ERROR_IN_PARAMETER')

     Message: Error while parsing parameter '%s' (line: '%s')

   *  Error: `1344' SQLSTATE: `HY000'
     (`ER_FPARSER_EOF_IN_UNKNOWN_PARAMETER')

     Message: Unexpected end of file while skipping unknown parameter
     '%s'

   *  Error: `1345' SQLSTATE: `HY000' (`ER_VIEW_NO_EXPLAIN')

     Message: EXPLAIN/SHOW can not be issued; lacking privileges for
     underlying table

   *  Error: `1346' SQLSTATE: `HY000' (`ER_FRM_UNKNOWN_TYPE')

     Message: File '%s' has unknown type '%s' in its header

   *  Error: `1347' SQLSTATE: `HY000' (`ER_WRONG_OBJECT')

     Message: '%s.%s' is not %s

   *  Error: `1348' SQLSTATE: `HY000' (`ER_NONUPDATEABLE_COLUMN')

     Message: Column '%s' is not updatable

   *  Error: `1349' SQLSTATE: `HY000' (`ER_VIEW_SELECT_DERIVED')

     Message: View's SELECT contains a subquery in the FROM clause

   *  Error: `1350' SQLSTATE: `HY000' (`ER_VIEW_SELECT_CLAUSE')

     Message: View's SELECT contains a '%s' clause

   *  Error: `1351' SQLSTATE: `HY000' (`ER_VIEW_SELECT_VARIABLE')

     Message: View's SELECT contains a variable or parameter

   *  Error: `1352' SQLSTATE: `HY000' (`ER_VIEW_SELECT_TMPTABLE')

     Message: View's SELECT refers to a temporary table '%s'

   *  Error: `1353' SQLSTATE: `HY000' (`ER_VIEW_WRONG_LIST')

     Message: View's SELECT and view's field list have different column
     counts

   *  Error: `1354' SQLSTATE: `HY000' (`ER_WARN_VIEW_MERGE')

     Message: View merge algorithm can't be used here for now (assumed
     undefined algorithm)

   *  Error: `1355' SQLSTATE: `HY000' (`ER_WARN_VIEW_WITHOUT_KEY')

     Message: View being updated does not have complete key of
     underlying table in it

   *  Error: `1356' SQLSTATE: `HY000' (`ER_VIEW_INVALID')

     Message: View '%s.%s' references invalid table(s) or column(s) or
     function(s) or definer/invoker of view lack rights to use them

   *  Error: `1357' SQLSTATE: `HY000' (`ER_SP_NO_DROP_SP')

     Message: Can't drop or alter a %s from within another stored
     routine

   *  Error: `1358' SQLSTATE: `HY000' (`ER_SP_GOTO_IN_HNDLR')

     Message: GOTO is not allowed in a stored procedure handler

   *  Error: `1359' SQLSTATE: `HY000' (`ER_TRG_ALREADY_EXISTS')

     Message: Trigger already exists

   *  Error: `1360' SQLSTATE: `HY000' (`ER_TRG_DOES_NOT_EXIST')

     Message: Trigger does not exist

   *  Error: `1361' SQLSTATE: `HY000' (`ER_TRG_ON_VIEW_OR_TEMP_TABLE')

     Message: Trigger's '%s' is view or temporary table

   *  Error: `1362' SQLSTATE: `HY000' (`ER_TRG_CANT_CHANGE_ROW')

     Message: Updating of %s row is not allowed in %strigger

   *  Error: `1363' SQLSTATE: `HY000' (`ER_TRG_NO_SUCH_ROW_IN_TRG')

     Message: There is no %s row in %s trigger

   *  Error: `1364' SQLSTATE: `HY000' (`ER_NO_DEFAULT_FOR_FIELD')

     Message: Field '%s' doesn't have a default value

   *  Error: `1365' SQLSTATE: `22012' (`ER_DIVISION_BY_ZERO')

     Message: Division by 0

   *  Error: `1366' SQLSTATE: `HY000'
     (`ER_TRUNCATED_WRONG_VALUE_FOR_FIELD')

     Message: Incorrect %s value: '%s' for column '%s' at row %ld

   *  Error: `1367' SQLSTATE: `22007' (`ER_ILLEGAL_VALUE_FOR_TYPE')

     Message: Illegal %s '%s' value found during parsing

   *  Error: `1368' SQLSTATE: `HY000' (`ER_VIEW_NONUPD_CHECK')

     Message: CHECK OPTION on non-updatable view '%s.%s'

   *  Error: `1369' SQLSTATE: `HY000' (`ER_VIEW_CHECK_FAILED')

     Message: CHECK OPTION failed '%s.%s'

   *  Error: `1370' SQLSTATE: `42000' (`ER_PROCACCESS_DENIED_ERROR')

     Message: %s command denied to user '%s'@'%s' for routine '%s'

   *  Error: `1371' SQLSTATE: `HY000' (`ER_RELAY_LOG_FAIL')

     Message: Failed purging old relay logs: %s

   *  Error: `1372' SQLSTATE: `HY000' (`ER_PASSWD_LENGTH')

     Message: Password hash should be a %d-digit hexadecimal number

   *  Error: `1373' SQLSTATE: `HY000' (`ER_UNKNOWN_TARGET_BINLOG')

     Message: Target log not found in binlog index

   *  Error: `1374' SQLSTATE: `HY000' (`ER_IO_ERR_LOG_INDEX_READ')

     Message: I/O error reading log index file

   *  Error: `1375' SQLSTATE: `HY000' (`ER_BINLOG_PURGE_PROHIBITED')

     Message: Server configuration does not permit binlog purge

   *  Error: `1376' SQLSTATE: `HY000' (`ER_FSEEK_FAIL')

     Message: Failed on fseek()

   *  Error: `1377' SQLSTATE: `HY000' (`ER_BINLOG_PURGE_FATAL_ERR')

     Message: Fatal error during log purge

   *  Error: `1378' SQLSTATE: `HY000' (`ER_LOG_IN_USE')

     Message: A purgeable log is in use, will not purge

   *  Error: `1379' SQLSTATE: `HY000' (`ER_LOG_PURGE_UNKNOWN_ERR')

     Message: Unknown error during log purge

   *  Error: `1380' SQLSTATE: `HY000' (`ER_RELAY_LOG_INIT')

     Message: Failed initializing relay log position: %s

   *  Error: `1381' SQLSTATE: `HY000' (`ER_NO_BINARY_LOGGING')

     Message: You are not using binary logging

   *  Error: `1382' SQLSTATE: `HY000' (`ER_RESERVED_SYNTAX')

     Message: The '%s' syntax is reserved for purposes internal to the
     MySQL server

   *  Error: `1383' SQLSTATE: `HY000' (`ER_WSAS_FAILED')

     Message: WSAStartup Failed

   *  Error: `1384' SQLSTATE: `HY000' (`ER_DIFF_GROUPS_PROC')

     Message: Can't handle procedures with different groups yet

   *  Error: `1385' SQLSTATE: `HY000' (`ER_NO_GROUP_FOR_PROC')

     Message: Select must have a group with this procedure

   *  Error: `1386' SQLSTATE: `HY000' (`ER_ORDER_WITH_PROC')

     Message: Can't use ORDER clause with this procedure

   *  Error: `1387' SQLSTATE: `HY000'
     (`ER_LOGGING_PROHIBIT_CHANGING_OF')

     Message: Binary logging and replication forbid changing the global
     server %s

   *  Error: `1388' SQLSTATE: `HY000' (`ER_NO_FILE_MAPPING')

     Message: Can't map file: %s, errno: %d

   *  Error: `1389' SQLSTATE: `HY000' (`ER_WRONG_MAGIC')

     Message: Wrong magic in %s

   *  Error: `1390' SQLSTATE: `HY000' (`ER_PS_MANY_PARAM')

     Message: Prepared statement contains too many placeholders

   *  Error: `1391' SQLSTATE: `HY000' (`ER_KEY_PART_0')

     Message: Key part '%s' length cannot be 0

   *  Error: `1392' SQLSTATE: `HY000' (`ER_VIEW_CHECKSUM')

     Message: View text checksum failed

   *  Error: `1393' SQLSTATE: `HY000' (`ER_VIEW_MULTIUPDATE')

     Message: Can not modify more than one base table through a join
     view '%s.%s'

   *  Error: `1394' SQLSTATE: `HY000' (`ER_VIEW_NO_INSERT_FIELD_LIST')

     Message: Can not insert into join view '%s.%s' without fields list

   *  Error: `1395' SQLSTATE: `HY000' (`ER_VIEW_DELETE_MERGE_VIEW')

     Message: Can not delete from join view '%s.%s'

   *  Error: `1396' SQLSTATE: `HY000' (`ER_CANNOT_USER')

     Message: Operation %s failed for %s

   *  Error: `1397' SQLSTATE: `XAE04' (`ER_XAER_NOTA')

     Message: XAER_NOTA: Unknown XID

   *  Error: `1398' SQLSTATE: `XAE05' (`ER_XAER_INVAL')

     Message: XAER_INVAL: Invalid arguments (or unsupported command)

   *  Error: `1399' SQLSTATE: `XAE07' (`ER_XAER_RMFAIL')

     Message: XAER_RMFAIL: The command cannot be executed when global
     transaction is in the %s state

   *  Error: `1400' SQLSTATE: `XAE09' (`ER_XAER_OUTSIDE')

     Message: XAER_OUTSIDE: Some work is done outside global transaction

   *  Error: `1401' SQLSTATE: `XAE03' (`ER_XAER_RMERR')

     Message: XAER_RMERR: Fatal error occurred in the transaction
     branch - check your data for consistency

   *  Error: `1402' SQLSTATE: `XA100' (`ER_XA_RBROLLBACK')

     Message: XA_RBROLLBACK: Transaction branch was rolled back

   *  Error: `1403' SQLSTATE: `42000' (`ER_NONEXISTING_PROC_GRANT')

     Message: There is no such grant defined for user '%s' on host '%s'
     on routine '%s'

   *  Error: `1404' SQLSTATE: `HY000' (`ER_PROC_AUTO_GRANT_FAIL')

     Message: Failed to grant EXECUTE and ALTER ROUTINE privileges

   *  Error: `1405' SQLSTATE: `HY000' (`ER_PROC_AUTO_REVOKE_FAIL')

     Message: Failed to revoke all privileges to dropped routine

   *  Error: `1406' SQLSTATE: `22001' (`ER_DATA_TOO_LONG')

     Message: Data too long for column '%s' at row %ld

   *  Error: `1407' SQLSTATE: `42000' (`ER_SP_BAD_SQLSTATE')

     Message: Bad SQLSTATE: '%s'

   *  Error: `1408' SQLSTATE: `HY000' (`ER_STARTUP')

     Message: %s: ready for connections. Version: '%s' socket: '%s'
     port: %d %s

   *  Error: `1409' SQLSTATE: `HY000'
     (`ER_LOAD_FROM_FIXED_SIZE_ROWS_TO_VAR')

     Message: Can't load value from file with fixed size rows to
     variable

   *  Error: `1410' SQLSTATE: `42000' (`ER_CANT_CREATE_USER_WITH_GRANT')

     Message: You are not allowed to create a user with GRANT

   *  Error: `1411' SQLSTATE: `HY000' (`ER_WRONG_VALUE_FOR_TYPE')

     Message: Incorrect %s value: '%s' for function %s

   *  Error: `1412' SQLSTATE: `HY000' (`ER_TABLE_DEF_CHANGED')

     Message: Table definition has changed, please retry transaction

   *  Error: `1413' SQLSTATE: `42000' (`ER_SP_DUP_HANDLER')

     Message: Duplicate handler declared in the same block

   *  Error: `1414' SQLSTATE: `42000' (`ER_SP_NOT_VAR_ARG')

     Message: OUT or INOUT argument %d for routine %s is not a variable
     or NEW pseudo-variable in BEFORE trigger

   *  Error: `1415' SQLSTATE: `0A000' (`ER_SP_NO_RETSET')

     Message: Not allowed to return a result set from a %s

   *  Error: `1416' SQLSTATE: `22003' (`ER_CANT_CREATE_GEOMETRY_OBJECT')

     Message: Cannot get geometry object from data you send to the
     GEOMETRY field

   *  Error: `1417' SQLSTATE: `HY000' (`ER_FAILED_ROUTINE_BREAK_BINLOG')

     Message: A routine failed and has neither NO SQL nor READS SQL
     DATA in its declaration and binary logging is enabled; if
     non-transactional tables were updated, the binary log will miss
     their changes

   *  Error: `1418' SQLSTATE: `HY000' (`ER_BINLOG_UNSAFE_ROUTINE')

     Message: This function has none of DETERMINISTIC, NO SQL, or READS
     SQL DATA in its declaration and binary logging is enabled (you
     *might* want to use the less safe log_bin_trust_function_creators
     variable)

   *  Error: `1419' SQLSTATE: `HY000'
     (`ER_BINLOG_CREATE_ROUTINE_NEED_SUPER')

     Message: You do not have the SUPER privilege and binary logging is
     enabled (you *might* want to use the less safe
     log_bin_trust_function_creators variable)

   *  Error: `1420' SQLSTATE: `HY000' (`ER_EXEC_STMT_WITH_OPEN_CURSOR')

     Message: You can't execute a prepared statement which has an open
     cursor associated with it. Reset the statement to re-execute it.

   *  Error: `1421' SQLSTATE: `HY000' (`ER_STMT_HAS_NO_OPEN_CURSOR')

     Message: The statement (%lu) has no open cursor.

   *  Error: `1422' SQLSTATE: `HY000'
     (`ER_COMMIT_NOT_ALLOWED_IN_SF_OR_TRG')

     Message: Explicit or implicit commit is not allowed in stored
     function or trigger.

   *  Error: `1423' SQLSTATE: `HY000' (`ER_NO_DEFAULT_FOR_VIEW_FIELD')

     Message: Field of view '%s.%s' underlying table doesn't have a
     default value

   *  Error: `1424' SQLSTATE: `HY000' (`ER_SP_NO_RECURSION')

     Message: Recursive stored functions and triggers are not allowed.

   *  Error: `1425' SQLSTATE: `42000' (`ER_TOO_BIG_SCALE')

     Message: Too big scale %d specified for column '%s'. Maximum is
     %lu.

   *  Error: `1426' SQLSTATE: `42000' (`ER_TOO_BIG_PRECISION')

     Message: Too big precision %d specified for column '%s'. Maximum
     is %lu.

   *  Error: `1427' SQLSTATE: `42000' (`ER_M_BIGGER_THAN_D')

     Message: For float(M,D), double(M,D) or decimal(M,D), M must be >=
     D (column '%s').

   *  Error: `1428' SQLSTATE: `HY000' (`ER_WRONG_LOCK_OF_SYSTEM_TABLE')

     Message: You can't combine write-locking of system tables with
     other tables or lock types

   *  Error: `1429' SQLSTATE: `HY000'
     (`ER_CONNECT_TO_FOREIGN_DATA_SOURCE')

     Message: Unable to connect to foreign data source: %s

   *  Error: `1430' SQLSTATE: `HY000'
     (`ER_QUERY_ON_FOREIGN_DATA_SOURCE')

     Message: There was a problem processing the query on the foreign
     data source. Data source error: %s

   *  Error: `1431' SQLSTATE: `HY000'
     (`ER_FOREIGN_DATA_SOURCE_DOESNT_EXIST')

     Message: The foreign data source you are trying to reference does
     not exist. Data source error: %s

   *  Error: `1432' SQLSTATE: `HY000'
     (`ER_FOREIGN_DATA_STRING_INVALID_CANT_CREATE')

     Message: Can't create federated table. The data source connection
     string '%s' is not in the correct format

   *  Error: `1433' SQLSTATE: `HY000' (`ER_FOREIGN_DATA_STRING_INVALID')

     Message: The data source connection string '%s' is not in the
     correct format

   *  Error: `1434' SQLSTATE: `HY000' (`ER_CANT_CREATE_FEDERATED_TABLE')

     Message: Can't create federated table. Foreign data src error: %s

   *  Error: `1435' SQLSTATE: `HY000' (`ER_TRG_IN_WRONG_SCHEMA')

     Message: Trigger in wrong schema

   *  Error: `1436' SQLSTATE: `HY000' (`ER_STACK_OVERRUN_NEED_MORE')

     Message: Thread stack overrun: %ld bytes used of a %ld byte stack,
     and %ld bytes needed. Use 'mysqld -thread_stack=#' to specify a
     bigger stack.

   *  Error: `1437' SQLSTATE: `42000' (`ER_TOO_LONG_BODY')

     Message: Routine body for '%s' is too long

   *  Error: `1438' SQLSTATE: `HY000'
     (`ER_WARN_CANT_DROP_DEFAULT_KEYCACHE')

     Message: Cannot drop default keycache

   *  Error: `1439' SQLSTATE: `42000' (`ER_TOO_BIG_DISPLAYWIDTH')

     Message: Display width out of range for column '%s' (max = %lu)

   *  Error: `1440' SQLSTATE: `XAE08' (`ER_XAER_DUPID')

     Message: XAER_DUPID: The XID already exists

   *  Error: `1441' SQLSTATE: `22008' (`ER_DATETIME_FUNCTION_OVERFLOW')

     Message: Datetime function: %s field overflow

   *  Error: `1442' SQLSTATE: `HY000'
     (`ER_CANT_UPDATE_USED_TABLE_IN_SF_OR_TRG')

     Message: Can't update table '%s' in stored function/trigger
     because it is already used by statement which invoked this stored
     function/trigger.

   *  Error: `1443' SQLSTATE: `HY000' (`ER_VIEW_PREVENT_UPDATE')

     Message: The definition of table '%s' prevents operation %s on
     table '%s'.

   *  Error: `1444' SQLSTATE: `HY000' (`ER_PS_NO_RECURSION')

     Message: The prepared statement contains a stored routine call
     that refers to that same statement. It's not allowed to execute a
     prepared statement in such a recursive manner

   *  Error: `1445' SQLSTATE: `HY000' (`ER_SP_CANT_SET_AUTOCOMMIT')

     Message: Not allowed to set autocommit from a stored function or
     trigger

   *  Error: `1446' SQLSTATE: `HY000' (`ER_MALFORMED_DEFINER')

     Message: Definer is not fully qualified

   *  Error: `1447' SQLSTATE: `HY000' (`ER_VIEW_FRM_NO_USER')

     Message: View '%s'.'%s' has no definer information (old table
     format). Current user is used as definer. Please recreate the view!

   *  Error: `1448' SQLSTATE: `HY000' (`ER_VIEW_OTHER_USER')

     Message: You need the SUPER privilege for creation view with
     '%s'@'%s' definer

   *  Error: `1449' SQLSTATE: `HY000' (`ER_NO_SUCH_USER')

     Message: The user specified as a definer ('%s'@'%s') does not exist

   *  Error: `1450' SQLSTATE: `HY000' (`ER_FORBID_SCHEMA_CHANGE')

     Message: Changing schema from '%s' to '%s' is not allowed.

   *  Error: `1451' SQLSTATE: `23000' (`ER_ROW_IS_REFERENCED_2')

     Message: Cannot delete or update a parent row: a foreign key
     constraint fails (%s)

   *  Error: `1452' SQLSTATE: `23000' (`ER_NO_REFERENCED_ROW_2')

     Message: Cannot add or update a child row: a foreign key
     constraint fails (%s)

   *  Error: `1453' SQLSTATE: `42000' (`ER_SP_BAD_VAR_SHADOW')

     Message: Variable '%s' must be quoted with `...`, or renamed

   *  Error: `1454' SQLSTATE: `HY000' (`ER_TRG_NO_DEFINER')

     Message: No definer attribute for trigger '%s'.'%s'. The trigger
     will be activated under the authorization of the invoker, which
     may have insufficient privileges. Please recreate the trigger.

   *  Error: `1455' SQLSTATE: `HY000' (`ER_OLD_FILE_FORMAT')

     Message: '%s' has an old format, you should re-create the '%s'
     object(s)

   *  Error: `1456' SQLSTATE: `HY000' (`ER_SP_RECURSION_LIMIT')

     Message: Recursive limit %d (as set by the max_sp_recursion_depth
     variable) was exceeded for routine %s

   *  Error: `1457' SQLSTATE: `HY000' (`ER_SP_PROC_TABLE_CORRUPT')

     Message: Failed to load routine %s. The table mysql.proc is
     missing, corrupt, or contains bad data (internal code %d)

   *  Error: `1458' SQLSTATE: `42000' (`ER_SP_WRONG_NAME')

     Message: Incorrect routine name '%s'

   *  Error: `1459' SQLSTATE: `HY000' (`ER_TABLE_NEEDS_UPGRADE')

     Message: Table upgrade required. Please do "REPAIR TABLE `%s`" or
     dump/reload to fix it!

   *  Error: `1460' SQLSTATE: `42000' (`ER_SP_NO_AGGREGATE')

     Message: AGGREGATE is not supported for stored functions

   *  Error: `1461' SQLSTATE: `42000'
     (`ER_MAX_PREPARED_STMT_COUNT_REACHED')

     Message: Can't create more than max_prepared_stmt_count statements
     (current value: %lu)

   *  Error: `1462' SQLSTATE: `HY000' (`ER_VIEW_RECURSIVE')

     Message: `%s`.`%s` contains view recursion

   *  Error: `1463' SQLSTATE: `42000' (`ER_NON_GROUPING_FIELD_USED')

     Message: Non-grouping field '%s' is used in %s clause

   *  Error: `1464' SQLSTATE: `HY000' (`ER_TABLE_CANT_HANDLE_SPKEYS')

     Message: The used table type doesn't support SPATIAL indexes

   *  Error: `1465' SQLSTATE: `HY000'
     (`ER_NO_TRIGGERS_ON_SYSTEM_SCHEMA')

     Message: Triggers can not be created on system tables

   *  Error: `1466' SQLSTATE: `HY000' (`ER_REMOVED_SPACES')

     Message: Leading spaces are removed from name '%s'

   *  Error: `1467' SQLSTATE: `HY000' (`ER_AUTOINC_READ_FAILED')

     Message: Failed to read auto-increment value from storage engine

   *  Error: `1468' SQLSTATE: `HY000' (`ER_USERNAME')

     Message: user name

   *  Error: `1469' SQLSTATE: `HY000' (`ER_HOSTNAME')

     Message: host name

   *  Error: `1470' SQLSTATE: `HY000' (`ER_WRONG_STRING_LENGTH')

     Message: String '%s' is too long for %s (should be no longer than
     %d)

   *  Error: `1471' SQLSTATE: `HY000' (`ER_NON_INSERTABLE_TABLE')

     Message: The target table %s of the %s is not insertable-into

   *  Error: `1472' SQLSTATE: `HY000' (`ER_ADMIN_WRONG_MRG_TABLE')

     Message: Table '%s' is differently defined or of non-MyISAM type
     or doesn't exist

   *  Error: `1473' SQLSTATE: `HY000'
     (`ER_TOO_HIGH_LEVEL_OF_NESTING_FOR_SELECT')

     Message: Too high level of nesting for select

   *  Error: `1474' SQLSTATE: `HY000' (`ER_NAME_BECOMES_EMPTY')

     Message: Name '%s' has become "

   *  Error: `1475' SQLSTATE: `HY000' (`ER_AMBIGUOUS_FIELD_TERM')

     Message: First character of the FIELDS TERMINATED string is
     ambiguous; please use non-optional and non-empty FIELDS ENCLOSED BY

   *  Error: `1476' SQLSTATE: `HY000' (`ER_FOREIGN_SERVER_EXISTS')

     Message: The foreign server, %s, you are trying to create already
     exists.

   *  Error: `1477' SQLSTATE: `HY000' (`ER_FOREIGN_SERVER_DOESNT_EXIST')

     Message: The foreign server name you are trying to reference does
     not exist. Data source error: %s

   *  Error: `1478' SQLSTATE: `HY000' (`ER_ILLEGAL_HA_CREATE_OPTION')

     Message: Table storage engine '%s' does not support the create
     option '%s'

   *  Error: `1479' SQLSTATE: `HY000'
     (`ER_PARTITION_REQUIRES_VALUES_ERROR')

     Message: Syntax error: %s PARTITIONING requires definition of
     VALUES %s for each partition

   *  Error: `1480' SQLSTATE: `HY000'
     (`ER_PARTITION_WRONG_VALUES_ERROR')

     Message: Only %s PARTITIONING can use VALUES %s in partition
     definition

   *  Error: `1481' SQLSTATE: `HY000' (`ER_PARTITION_MAXVALUE_ERROR')

     Message: MAXVALUE can only be used in last partition definition

   *  Error: `1482' SQLSTATE: `HY000'
     (`ER_PARTITION_SUBPARTITION_ERROR')

     Message: Subpartitions can only be hash partitions and by key

   *  Error: `1483' SQLSTATE: `HY000' (`ER_PARTITION_SUBPART_MIX_ERROR')

     Message: Must define subpartitions on all partitions if on one
     partition

   *  Error: `1484' SQLSTATE: `HY000'
     (`ER_PARTITION_WRONG_NO_PART_ERROR')

     Message: Wrong number of partitions defined, mismatch with
     previous setting

   *  Error: `1485' SQLSTATE: `HY000'
     (`ER_PARTITION_WRONG_NO_SUBPART_ERROR')

     Message: Wrong number of subpartitions defined, mismatch with
     previous setting

   *  Error: `1486' SQLSTATE: `HY000'
     (`ER_CONST_EXPR_IN_PARTITION_FUNC_ERROR')

     Message: Constant/Random expression in (sub)partitioning function
     is not allowed

     `ER_CONST_EXPR_IN_PARTITION_FUNC_ERROR' was removed after 5.5.0.

     In 5.5.1: `ER_CONST_EXPR_IN_PARTITION_FUNC_ERROR' was renamed to
     `ER_WRONG_EXPR_IN_PARTITION_FUNC_ERROR'.

   *  Error: `1486' SQLSTATE: `HY000'
     (`ER_WRONG_EXPR_IN_PARTITION_FUNC_ERROR')

     Message: Constant, random or timezone-dependent expressions in
     (sub)partitioning function are not allowed

     `ER_WRONG_EXPR_IN_PARTITION_FUNC_ERROR' was introduced in 5.5.1.

     In 5.5.1: `ER_CONST_EXPR_IN_PARTITION_FUNC_ERROR' was renamed to
     `ER_WRONG_EXPR_IN_PARTITION_FUNC_ERROR'.

   *  Error: `1487' SQLSTATE: `HY000'
     (`ER_NO_CONST_EXPR_IN_RANGE_OR_LIST_ERROR')

     Message: Expression in RANGE/LIST VALUES must be constant

   *  Error: `1488' SQLSTATE: `HY000' (`ER_FIELD_NOT_FOUND_PART_ERROR')

     Message: Field in list of fields for partition function not found
     in table

   *  Error: `1489' SQLSTATE: `HY000'
     (`ER_LIST_OF_FIELDS_ONLY_IN_HASH_ERROR')

     Message: List of fields is only allowed in KEY partitions

   *  Error: `1490' SQLSTATE: `HY000'
     (`ER_INCONSISTENT_PARTITION_INFO_ERROR')

     Message: The partition info in the frm file is not consistent with
     what can be written into the frm file

   *  Error: `1491' SQLSTATE: `HY000'
     (`ER_PARTITION_FUNC_NOT_ALLOWED_ERROR')

     Message: The %s function returns the wrong type

   *  Error: `1492' SQLSTATE: `HY000'
     (`ER_PARTITIONS_MUST_BE_DEFINED_ERROR')

     Message: For %s partitions each partition must be defined

   *  Error: `1493' SQLSTATE: `HY000' (`ER_RANGE_NOT_INCREASING_ERROR')

     Message: VALUES LESS THAN value must be strictly increasing for
     each partition

   *  Error: `1494' SQLSTATE: `HY000'
     (`ER_INCONSISTENT_TYPE_OF_FUNCTIONS_ERROR')

     Message: VALUES value must be of same type as partition function

   *  Error: `1495' SQLSTATE: `HY000'
     (`ER_MULTIPLE_DEF_CONST_IN_LIST_PART_ERROR')

     Message: Multiple definition of same constant in list partitioning

   *  Error: `1496' SQLSTATE: `HY000' (`ER_PARTITION_ENTRY_ERROR')

     Message: Partitioning can not be used stand-alone in query

   *  Error: `1497' SQLSTATE: `HY000' (`ER_MIX_HANDLER_ERROR')

     Message: The mix of handlers in the partitions is not allowed in
     this version of MySQL

   *  Error: `1498' SQLSTATE: `HY000' (`ER_PARTITION_NOT_DEFINED_ERROR')

     Message: For the partitioned engine it is necessary to define all
     %s

   *  Error: `1499' SQLSTATE: `HY000' (`ER_TOO_MANY_PARTITIONS_ERROR')

     Message: Too many partitions (including subpartitions) were defined

   *  Error: `1500' SQLSTATE: `HY000' (`ER_SUBPARTITION_ERROR')

     Message: It is only possible to mix RANGE/LIST partitioning with
     HASH/KEY partitioning for subpartitioning

   *  Error: `1501' SQLSTATE: `HY000' (`ER_CANT_CREATE_HANDLER_FILE')

     Message: Failed to create specific handler file

   *  Error: `1502' SQLSTATE: `HY000'
     (`ER_BLOB_FIELD_IN_PART_FUNC_ERROR')

     Message: A BLOB field is not allowed in partition function

   *  Error: `1503' SQLSTATE: `HY000'
     (`ER_UNIQUE_KEY_NEED_ALL_FIELDS_IN_PF')

     Message: A %s must include all columns in the table's partitioning
     function

   *  Error: `1504' SQLSTATE: `HY000' (`ER_NO_PARTS_ERROR')

     Message: Number of %s = 0 is not an allowed value

   *  Error: `1505' SQLSTATE: `HY000'
     (`ER_PARTITION_MGMT_ON_NONPARTITIONED')

     Message: Partition management on a not partitioned table is not
     possible

   *  Error: `1506' SQLSTATE: `HY000' (`ER_FOREIGN_KEY_ON_PARTITIONED')

     Message: Foreign key clause is not yet supported in conjunction
     with partitioning

   *  Error: `1507' SQLSTATE: `HY000' (`ER_DROP_PARTITION_NON_EXISTENT')

     Message: Error in list of partitions to %s

   *  Error: `1508' SQLSTATE: `HY000' (`ER_DROP_LAST_PARTITION')

     Message: Cannot remove all partitions, use DROP TABLE instead

   *  Error: `1509' SQLSTATE: `HY000'
     (`ER_COALESCE_ONLY_ON_HASH_PARTITION')

     Message: COALESCE PARTITION can only be used on HASH/KEY partitions

   *  Error: `1510' SQLSTATE: `HY000' (`ER_REORG_HASH_ONLY_ON_SAME_NO')

     Message: REORGANIZE PARTITION can only be used to reorganize
     partitions not to change their numbers

   *  Error: `1511' SQLSTATE: `HY000' (`ER_REORG_NO_PARAM_ERROR')

     Message: REORGANIZE PARTITION without parameters can only be used
     on auto-partitioned tables using HASH PARTITIONs

   *  Error: `1512' SQLSTATE: `HY000'
     (`ER_ONLY_ON_RANGE_LIST_PARTITION')

     Message: %s PARTITION can only be used on RANGE/LIST partitions

   *  Error: `1513' SQLSTATE: `HY000' (`ER_ADD_PARTITION_SUBPART_ERROR')

     Message: Trying to Add partition(s) with wrong number of
     subpartitions

   *  Error: `1514' SQLSTATE: `HY000'
     (`ER_ADD_PARTITION_NO_NEW_PARTITION')

     Message: At least one partition must be added

   *  Error: `1515' SQLSTATE: `HY000'
     (`ER_COALESCE_PARTITION_NO_PARTITION')

     Message: At least one partition must be coalesced

   *  Error: `1516' SQLSTATE: `HY000' (`ER_REORG_PARTITION_NOT_EXIST')

     Message: More partitions to reorganize than there are partitions

   *  Error: `1517' SQLSTATE: `HY000' (`ER_SAME_NAME_PARTITION')

     Message: Duplicate partition name %s

   *  Error: `1518' SQLSTATE: `HY000' (`ER_NO_BINLOG_ERROR')

     Message: It is not allowed to shut off binlog on this command

   *  Error: `1519' SQLSTATE: `HY000'
     (`ER_CONSECUTIVE_REORG_PARTITIONS')

     Message: When reorganizing a set of partitions they must be in
     consecutive order

   *  Error: `1520' SQLSTATE: `HY000' (`ER_REORG_OUTSIDE_RANGE')

     Message: Reorganize of range partitions cannot change total ranges
     except for last partition where it can extend the range

   *  Error: `1521' SQLSTATE: `HY000' (`ER_PARTITION_FUNCTION_FAILURE')

     Message: Partition function not supported in this version for this
     handler

   *  Error: `1522' SQLSTATE: `HY000' (`ER_PART_STATE_ERROR')

     Message: Partition state cannot be defined from CREATE/ALTER TABLE

   *  Error: `1523' SQLSTATE: `HY000' (`ER_LIMITED_PART_RANGE')

     Message: The %s handler only supports 32 bit integers in VALUES

   *  Error: `1524' SQLSTATE: `HY000' (`ER_PLUGIN_IS_NOT_LOADED')

     Message: Plugin '%s' is not loaded

   *  Error: `1525' SQLSTATE: `HY000' (`ER_WRONG_VALUE')

     Message: Incorrect %s value: '%s'

   *  Error: `1526' SQLSTATE: `HY000'
     (`ER_NO_PARTITION_FOR_GIVEN_VALUE')

     Message: Table has no partition for value %s

   *  Error: `1527' SQLSTATE: `HY000' (`ER_FILEGROUP_OPTION_ONLY_ONCE')

     Message: It is not allowed to specify %s more than once

   *  Error: `1528' SQLSTATE: `HY000' (`ER_CREATE_FILEGROUP_FAILED')

     Message: Failed to create %s

   *  Error: `1529' SQLSTATE: `HY000' (`ER_DROP_FILEGROUP_FAILED')

     Message: Failed to drop %s

   *  Error: `1530' SQLSTATE: `HY000'
     (`ER_TABLESPACE_AUTO_EXTEND_ERROR')

     Message: The handler doesn't support autoextend of tablespaces

   *  Error: `1531' SQLSTATE: `HY000' (`ER_WRONG_SIZE_NUMBER')

     Message: A size parameter was incorrectly specified, either number
     or on the form 10M

   *  Error: `1532' SQLSTATE: `HY000' (`ER_SIZE_OVERFLOW_ERROR')

     Message: The size number was correct but we don't allow the digit
     part to be more than 2 billion

   *  Error: `1533' SQLSTATE: `HY000' (`ER_ALTER_FILEGROUP_FAILED')

     Message: Failed to alter: %s

   *  Error: `1534' SQLSTATE: `HY000' (`ER_BINLOG_ROW_LOGGING_FAILED')

     Message: Writing one row to the row-based binary log failed

   *  Error: `1535' SQLSTATE: `HY000' (`ER_BINLOG_ROW_WRONG_TABLE_DEF')

     Message: Table definition on master and slave does not match: %s

   *  Error: `1536' SQLSTATE: `HY000' (`ER_BINLOG_ROW_RBR_TO_SBR')

     Message: Slave running with -log-slave-updates must use row-based
     binary logging to be able to replicate row-based binary log events

   *  Error: `1537' SQLSTATE: `HY000' (`ER_EVENT_ALREADY_EXISTS')

     Message: Event '%s' already exists

   *  Error: `1538' SQLSTATE: `HY000' (`ER_EVENT_STORE_FAILED')

     Message: Failed to store event %s. Error code %d from storage
     engine.

   *  Error: `1539' SQLSTATE: `HY000' (`ER_EVENT_DOES_NOT_EXIST')

     Message: Unknown event '%s'

   *  Error: `1540' SQLSTATE: `HY000' (`ER_EVENT_CANT_ALTER')

     Message: Failed to alter event '%s'

   *  Error: `1541' SQLSTATE: `HY000' (`ER_EVENT_DROP_FAILED')

     Message: Failed to drop %s

   *  Error: `1542' SQLSTATE: `HY000'
     (`ER_EVENT_INTERVAL_NOT_POSITIVE_OR_TOO_BIG')

     Message: INTERVAL is either not positive or too big

   *  Error: `1543' SQLSTATE: `HY000' (`ER_EVENT_ENDS_BEFORE_STARTS')

     Message: ENDS is either invalid or before STARTS

   *  Error: `1544' SQLSTATE: `HY000' (`ER_EVENT_EXEC_TIME_IN_THE_PAST')

     Message: Event execution time is in the past. Event has been
     disabled

   *  Error: `1545' SQLSTATE: `HY000' (`ER_EVENT_OPEN_TABLE_FAILED')

     Message: Failed to open mysql.event

   *  Error: `1546' SQLSTATE: `HY000'
     (`ER_EVENT_NEITHER_M_EXPR_NOR_M_AT')

     Message: No datetime expression provided

   *  Error: `1547' SQLSTATE: `HY000'
     (`ER_COL_COUNT_DOESNT_MATCH_CORRUPTED')

     Message: Column count of mysql.%s is wrong. Expected %d, found %d.
     The table is probably corrupted

   *  Error: `1548' SQLSTATE: `HY000' (`ER_CANNOT_LOAD_FROM_TABLE')

     Message: Cannot load from mysql.%s. The table is probably corrupted

   *  Error: `1549' SQLSTATE: `HY000' (`ER_EVENT_CANNOT_DELETE')

     Message: Failed to delete the event from mysql.event

   *  Error: `1550' SQLSTATE: `HY000' (`ER_EVENT_COMPILE_ERROR')

     Message: Error during compilation of event's body

   *  Error: `1551' SQLSTATE: `HY000' (`ER_EVENT_SAME_NAME')

     Message: Same old and new event name

   *  Error: `1552' SQLSTATE: `HY000' (`ER_EVENT_DATA_TOO_LONG')

     Message: Data for column '%s' too long

   *  Error: `1553' SQLSTATE: `HY000' (`ER_DROP_INDEX_FK')

     Message: Cannot drop index '%s': needed in a foreign key constraint

   *  Error: `1554' SQLSTATE: `HY000'
     (`ER_WARN_DEPRECATED_SYNTAX_WITH_VER')

     Message: The syntax '%s' is deprecated and will be removed in
     MySQL %s. Please use %s instead

   *  Error: `1555' SQLSTATE: `HY000' (`ER_CANT_WRITE_LOCK_LOG_TABLE')

     Message: You can't write-lock a log table. Only read access is
     possible

   *  Error: `1556' SQLSTATE: `HY000' (`ER_CANT_LOCK_LOG_TABLE')

     Message: You can't use locks with log tables.

   *  Error: `1557' SQLSTATE: `23000' (`ER_FOREIGN_DUPLICATE_KEY')

     Message: Upholding foreign key constraints for table '%s', entry
     '%s', key %d would lead to a duplicate entry

   *  Error: `1558' SQLSTATE: `HY000'
     (`ER_COL_COUNT_DOESNT_MATCH_PLEASE_UPDATE')

     Message: Column count of mysql.%s is wrong. Expected %d, found %d.
     Created with MySQL %d, now running %d. Please use mysql_upgrade to
     fix this error.

   *  Error: `1559' SQLSTATE: `HY000'
     (`ER_TEMP_TABLE_PREVENTS_SWITCH_OUT_OF_RBR')

     Message: Cannot switch out of the row-based binary log format when
     the session has open temporary tables

   *  Error: `1560' SQLSTATE: `HY000'
     (`ER_STORED_FUNCTION_PREVENTS_SWITCH_BINLOG_FORMAT')

     Message: Cannot change the binary logging format inside a stored
     function or trigger

   *  Error: `1561' SQLSTATE: `HY000'
     (`ER_NDB_CANT_SWITCH_BINLOG_FORMAT')

     Message: The NDB cluster engine does not support changing the
     binlog format on the fly yet

   *  Error: `1562' SQLSTATE: `HY000' (`ER_PARTITION_NO_TEMPORARY')

     Message: Cannot create temporary table with partitions

   *  Error: `1563' SQLSTATE: `HY000'
     (`ER_PARTITION_CONST_DOMAIN_ERROR')

     Message: Partition constant is out of partition function domain

   *  Error: `1564' SQLSTATE: `HY000'
     (`ER_PARTITION_FUNCTION_IS_NOT_ALLOWED')

     Message: This partition function is not allowed

   *  Error: `1565' SQLSTATE: `HY000' (`ER_DDL_LOG_ERROR')

     Message: Error in DDL log

   *  Error: `1566' SQLSTATE: `HY000' (`ER_NULL_IN_VALUES_LESS_THAN')

     Message: Not allowed to use NULL value in VALUES LESS THAN

   *  Error: `1567' SQLSTATE: `HY000' (`ER_WRONG_PARTITION_NAME')

     Message: Incorrect partition name

   *  Error: `1568' SQLSTATE: `25001' (`ER_CANT_CHANGE_TX_ISOLATION')

     Message: Transaction isolation level can't be changed while a
     transaction is in progress

   *  Error: `1569' SQLSTATE: `HY000'
     (`ER_DUP_ENTRY_AUTOINCREMENT_CASE')

     Message: ALTER TABLE causes auto_increment resequencing, resulting
     in duplicate entry '%s' for key '%s'

   *  Error: `1570' SQLSTATE: `HY000' (`ER_EVENT_MODIFY_QUEUE_ERROR')

     Message: Internal scheduler error %d

   *  Error: `1571' SQLSTATE: `HY000' (`ER_EVENT_SET_VAR_ERROR')

     Message: Error during starting/stopping of the scheduler. Error
     code %u

   *  Error: `1572' SQLSTATE: `HY000' (`ER_PARTITION_MERGE_ERROR')

     Message: Engine cannot be used in partitioned tables

   *  Error: `1573' SQLSTATE: `HY000' (`ER_CANT_ACTIVATE_LOG')

     Message: Cannot activate '%s' log

   *  Error: `1574' SQLSTATE: `HY000' (`ER_RBR_NOT_AVAILABLE')

     Message: The server was not built with row-based replication

   *  Error: `1575' SQLSTATE: `HY000' (`ER_BASE64_DECODE_ERROR')

     Message: Decoding of base64 string failed

   *  Error: `1576' SQLSTATE: `HY000' (`ER_EVENT_RECURSION_FORBIDDEN')

     Message: Recursion of EVENT DDL statements is forbidden when body
     is present

   *  Error: `1577' SQLSTATE: `HY000' (`ER_EVENTS_DB_ERROR')

     Message: Cannot proceed because system tables used by Event
     Scheduler were found damaged at server start

   *  Error: `1578' SQLSTATE: `HY000' (`ER_ONLY_INTEGERS_ALLOWED')

     Message: Only integers allowed as number here

   *  Error: `1579' SQLSTATE: `HY000' (`ER_UNSUPORTED_LOG_ENGINE')

     Message: This storage engine cannot be used for log tables"

   *  Error: `1580' SQLSTATE: `HY000' (`ER_BAD_LOG_STATEMENT')

     Message: You cannot '%s' a log table if logging is enabled

   *  Error: `1581' SQLSTATE: `HY000' (`ER_CANT_RENAME_LOG_TABLE')

     Message: Cannot rename '%s'. When logging enabled, rename to/from
     log table must rename two tables: the log table to an archive
     table and another table back to '%s'

   *  Error: `1582' SQLSTATE: `42000'
     (`ER_WRONG_PARAMCOUNT_TO_NATIVE_FCT')

     Message: Incorrect parameter count in the call to native function
     '%s'

   *  Error: `1583' SQLSTATE: `42000'
     (`ER_WRONG_PARAMETERS_TO_NATIVE_FCT')

     Message: Incorrect parameters in the call to native function '%s'

   *  Error: `1584' SQLSTATE: `42000'
     (`ER_WRONG_PARAMETERS_TO_STORED_FCT')

     Message: Incorrect parameters in the call to stored function '%s'

   *  Error: `1585' SQLSTATE: `HY000' (`ER_NATIVE_FCT_NAME_COLLISION')

     Message: This function '%s' has the same name as a native function

   *  Error: `1586' SQLSTATE: `23000' (`ER_DUP_ENTRY_WITH_KEY_NAME')

     Message: Duplicate entry '%s' for key '%s'

     The format string for this error is also used with `ER_DUP_ENTRY'.

   *  Error: `1587' SQLSTATE: `HY000' (`ER_BINLOG_PURGE_EMFILE')

     Message: Too many files opened, please execute the command again

   *  Error: `1588' SQLSTATE: `HY000'
     (`ER_EVENT_CANNOT_CREATE_IN_THE_PAST')

     Message: Event execution time is in the past and ON COMPLETION NOT
     PRESERVE is set. The event was dropped immediately after creation.

   *  Error: `1589' SQLSTATE: `HY000'
     (`ER_EVENT_CANNOT_ALTER_IN_THE_PAST')

     Message: Event execution time is in the past and ON COMPLETION NOT
     PRESERVE is set. The event was dropped immediately after creation.

   *  Error: `1590' SQLSTATE: `HY000' (`ER_SLAVE_INCIDENT')

     Message: The incident %s occured on the master. Message: %s

   *  Error: `1591' SQLSTATE: `HY000'
     (`ER_NO_PARTITION_FOR_GIVEN_VALUE_SILENT')

     Message: Table has no partition for some existing values

   *  Error: `1592' SQLSTATE: `HY000' (`ER_BINLOG_UNSAFE_STATEMENT')

     Message: Unsafe statement written to the binary log using
     statement format since BINLOG_FORMAT = STATEMENT. %s

   *  Error: `1593' SQLSTATE: `HY000' (`ER_SLAVE_FATAL_ERROR')

     Message: Fatal error: %s

   *  Error: `1594' SQLSTATE: `HY000'
     (`ER_SLAVE_RELAY_LOG_READ_FAILURE')

     Message: Relay log read failure: %s

   *  Error: `1595' SQLSTATE: `HY000'
     (`ER_SLAVE_RELAY_LOG_WRITE_FAILURE')

     Message: Relay log write failure: %s

   *  Error: `1596' SQLSTATE: `HY000' (`ER_SLAVE_CREATE_EVENT_FAILURE')

     Message: Failed to create %s

   *  Error: `1597' SQLSTATE: `HY000' (`ER_SLAVE_MASTER_COM_FAILURE')

     Message: Master command %s failed: %s

   *  Error: `1598' SQLSTATE: `HY000' (`ER_BINLOG_LOGGING_IMPOSSIBLE')

     Message: Binary logging not possible. Message: %s

   *  Error: `1599' SQLSTATE: `HY000' (`ER_VIEW_NO_CREATION_CTX')

     Message: View `%s`.`%s` has no creation context

   *  Error: `1600' SQLSTATE: `HY000' (`ER_VIEW_INVALID_CREATION_CTX')

     Message: Creation context of view `%s`.`%s' is invalid

   *  Error: `1601' SQLSTATE: `HY000' (`ER_SR_INVALID_CREATION_CTX')

     Message: Creation context of stored routine `%s`.`%s` is invalid

   *  Error: `1602' SQLSTATE: `HY000' (`ER_TRG_CORRUPTED_FILE')

     Message: Corrupted TRG file for table `%s`.`%s`

   *  Error: `1603' SQLSTATE: `HY000' (`ER_TRG_NO_CREATION_CTX')

     Message: Triggers for table `%s`.`%s` have no creation context

   *  Error: `1604' SQLSTATE: `HY000' (`ER_TRG_INVALID_CREATION_CTX')

     Message: Trigger creation context of table `%s`.`%s` is invalid

   *  Error: `1605' SQLSTATE: `HY000' (`ER_EVENT_INVALID_CREATION_CTX')

     Message: Creation context of event `%s`.`%s` is invalid

   *  Error: `1606' SQLSTATE: `HY000' (`ER_TRG_CANT_OPEN_TABLE')

     Message: Cannot open table for trigger `%s`.`%s`

   *  Error: `1607' SQLSTATE: `HY000' (`ER_CANT_CREATE_SROUTINE')

     Message: Cannot create stored routine `%s`. Check warnings

   *  Error: `1608' SQLSTATE: `HY000' (`ER_SLAVE_AMBIGOUS_EXEC_MODE')

     Message: Ambiguous slave modes combination. %s

     `ER_SLAVE_AMBIGOUS_EXEC_MODE' was removed after 5.5.2.

     In 5.5.3: `ER_SLAVE_AMBIGOUS_EXEC_MODE' was renamed to
     `ER_NEVER_USED'.

   *  Error: `1608' SQLSTATE: `HY000' (`ER_NEVER_USED')

     Message: Ambiguous slave modes combination. %s

     `ER_NEVER_USED' was introduced in 5.5.3.

     In 5.5.3: `ER_SLAVE_AMBIGOUS_EXEC_MODE' was renamed to
     `ER_NEVER_USED'.

   *  Error: `1609' SQLSTATE: `HY000'
     (`ER_NO_FORMAT_DESCRIPTION_EVENT_BEFORE_BINLOG_STATEMENT')

     Message: The BINLOG statement of type `%s` was not preceded by a
     format description BINLOG statement.

   *  Error: `1610' SQLSTATE: `HY000' (`ER_SLAVE_CORRUPT_EVENT')

     Message: Corrupted replication event was detected

   *  Error: `1611' SQLSTATE: `HY000' (`ER_LOAD_DATA_INVALID_COLUMN')

     Message: Invalid column reference (%s) in LOAD DATA

   *  Error: `1612' SQLSTATE: `HY000' (`ER_LOG_PURGE_NO_FILE')

     Message: Being purged log %s was not found

   *  Error: `1613' SQLSTATE: `XA106' (`ER_XA_RBTIMEOUT')

     Message: XA_RBTIMEOUT: Transaction branch was rolled back: took
     too long

   *  Error: `1614' SQLSTATE: `XA102' (`ER_XA_RBDEADLOCK')

     Message: XA_RBDEADLOCK: Transaction branch was rolled back:
     deadlock was detected

   *  Error: `1615' SQLSTATE: `HY000' (`ER_NEED_REPREPARE')

     Message: Prepared statement needs to be re-prepared

   *  Error: `1616' SQLSTATE: `HY000' (`ER_DELAYED_NOT_SUPPORTED')

     Message: DELAYED option not supported for table '%s'

   *  Error: `1617' SQLSTATE: `HY000' (`WARN_NO_MASTER_INFO')

     Message: The master info structure does not exist

   *  Error: `1618' SQLSTATE: `HY000' (`WARN_OPTION_IGNORED')

     Message: <%s> option ignored

   *  Error: `1619' SQLSTATE: `HY000' (`WARN_PLUGIN_DELETE_BUILTIN')

     Message: Built-in plugins cannot be deleted

   *  Error: `1620' SQLSTATE: `HY000' (`WARN_PLUGIN_BUSY')

     Message: Plugin is busy and will be uninstalled on shutdown

   *  Error: `1621' SQLSTATE: `HY000' (`ER_VARIABLE_IS_READONLY')

     Message: %s variable '%s' is read-only. Use SET %s to assign the
     value

   *  Error: `1622' SQLSTATE: `HY000'
     (`ER_WARN_ENGINE_TRANSACTION_ROLLBACK')

     Message: Storage engine %s does not support rollback for this
     statement. Transaction rolled back and must be restarted

   *  Error: `1623' SQLSTATE: `HY000' (`ER_SLAVE_HEARTBEAT_FAILURE')

     Message: Unexpected master's heartbeat data: %s

   *  Error: `1624' SQLSTATE: `HY000'
     (`ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE')

     Message: The requested value for the heartbeat period is either
     negative or exceeds the maximum allowed (%s seconds).

   *  Error: `1625' SQLSTATE: `HY000'
     (`ER_NDB_REPLICATION_SCHEMA_ERROR')

     Message: Bad schema for mysql.ndb_replication table. Message: %s

   *  Error: `1626' SQLSTATE: `HY000' (`ER_CONFLICT_FN_PARSE_ERROR')

     Message: Error in parsing conflict function. Message: %s

   *  Error: `1627' SQLSTATE: `HY000' (`ER_EXCEPTIONS_WRITE_ERROR')

     Message: Write to exceptions table failed. Message: %s"

   *  Error: `1628' SQLSTATE: `HY000' (`ER_TOO_LONG_TABLE_COMMENT')

     Message: Comment for table '%s' is too long (max = %lu)

   *  Error: `1629' SQLSTATE: `HY000' (`ER_TOO_LONG_FIELD_COMMENT')

     Message: Comment for field '%s' is too long (max = %lu)

   *  Error: `1630' SQLSTATE: `42000'
     (`ER_FUNC_INEXISTENT_NAME_COLLISION')

     Message: FUNCTION %s does not exist. Check the 'Function Name
     Parsing and Resolution' section in the Reference Manual

   *  Error: `1631' SQLSTATE: `HY000' (`ER_DATABASE_NAME')

     Message: Database

   *  Error: `1632' SQLSTATE: `HY000' (`ER_TABLE_NAME')

     Message: Table

   *  Error: `1633' SQLSTATE: `HY000' (`ER_PARTITION_NAME')

     Message: Partition

   *  Error: `1634' SQLSTATE: `HY000' (`ER_SUBPARTITION_NAME')

     Message: Subpartition

   *  Error: `1635' SQLSTATE: `HY000' (`ER_TEMPORARY_NAME')

     Message: Temporary

   *  Error: `1636' SQLSTATE: `HY000' (`ER_RENAMED_NAME')

     Message: Renamed

   *  Error: `1637' SQLSTATE: `HY000' (`ER_TOO_MANY_CONCURRENT_TRXS')

     Message: Too many active concurrent transactions

   *  Error: `1638' SQLSTATE: `HY000'
     (`WARN_NON_ASCII_SEPARATOR_NOT_IMPLEMENTED')

     Message: Non-ASCII separator arguments are not fully supported

   *  Error: `1639' SQLSTATE: `HY000' (`ER_DEBUG_SYNC_TIMEOUT')

     Message: debug sync point wait timed out

   *  Error: `1640' SQLSTATE: `HY000' (`ER_DEBUG_SYNC_HIT_LIMIT')

     Message: debug sync point hit limit reached

   *  Error: `1641' SQLSTATE: `42000' (`ER_DUP_SIGNAL_SET')

     Message: Duplicate condition information item '%s'

   *  Error: `1642' SQLSTATE: `01000' (`ER_SIGNAL_WARN')

     Message: Unhandled user-defined warning condition

   *  Error: `1643' SQLSTATE: `02000' (`ER_SIGNAL_NOT_FOUND')

     Message: Unhandled user-defined not found condition

   *  Error: `1644' SQLSTATE: `HY000' (`ER_SIGNAL_EXCEPTION')

     Message: Unhandled user-defined exception condition

   *  Error: `1645' SQLSTATE: `0K000'
     (`ER_RESIGNAL_WITHOUT_ACTIVE_HANDLER')

     Message: RESIGNAL when handler not active

   *  Error: `1646' SQLSTATE: `HY000' (`ER_SIGNAL_BAD_CONDITION_TYPE')

     Message: SIGNAL/RESIGNAL can only use a CONDITION defined with
     SQLSTATE

   *  Error: `1647' SQLSTATE: `HY000' (`WARN_COND_ITEM_TRUNCATED')

     Message: Data truncated for condition item '%s'

   *  Error: `1648' SQLSTATE: `HY000' (`ER_COND_ITEM_TOO_LONG')

     Message: Data too long for condition item '%s'

   *  Error: `1649' SQLSTATE: `HY000' (`ER_UNKNOWN_LOCALE')

     Message: Unknown locale: '%s'

   *  Error: `1650' SQLSTATE: `HY000' (`ER_SLAVE_IGNORE_SERVER_IDS')

     Message: The requested server id %d clashes with the slave startup
     option -replicate-same-server-id

   *  Error: `1651' SQLSTATE: `HY000' (`ER_QUERY_CACHE_DISABLED')

     Message: Query cache is disabled; restart the server with
     query_cache_type=1 to enable it

   *  Error: `1652' SQLSTATE: `HY000' (`ER_SAME_NAME_PARTITION_FIELD')

     Message: Duplicate partition field name '%s'

   *  Error: `1653' SQLSTATE: `HY000' (`ER_PARTITION_COLUMN_LIST_ERROR')

     Message: Inconsistency in usage of column lists for partitioning

   *  Error: `1654' SQLSTATE: `HY000'
     (`ER_WRONG_TYPE_COLUMN_VALUE_ERROR')

     Message: Partition column values of incorrect type

   *  Error: `1655' SQLSTATE: `HY000'
     (`ER_TOO_MANY_PARTITION_FUNC_FIELDS_ERROR')

     Message: Too many fields in '%s'

   *  Error: `1656' SQLSTATE: `HY000' (`ER_MAXVALUE_IN_VALUES_IN')

     Message: Cannot use MAXVALUE as value in VALUES IN

   *  Error: `1657' SQLSTATE: `HY000' (`ER_TOO_MANY_VALUES_ERROR')

     Message: Cannot have more than one value for this type of %s
     partitioning

   *  Error: `1658' SQLSTATE: `HY000'
     (`ER_ROW_SINGLE_PARTITION_FIELD_ERROR')

     Message: Row expressions in VALUES IN only allowed for multi-field
     column partitioning

   *  Error: `1659' SQLSTATE: `HY000'
     (`ER_FIELD_TYPE_NOT_ALLOWED_AS_PARTITION_FIELD')

     Message: Field '%s' is of a not allowed type for this type of
     partitioning

   *  Error: `1660' SQLSTATE: `HY000' (`ER_PARTITION_FIELDS_TOO_LONG')

     Message: The total length of the partitioning fields is too large

   *  Error: `1661' SQLSTATE: `HY000'
     (`ER_BINLOG_ROW_ENGINE_AND_STMT_ENGINE')

     Message: Cannot execute statement: impossible to write to binary
     log since both row-incapable engines and statement-incapable
     engines are involved.

     `ER_BINLOG_ROW_ENGINE_AND_STMT_ENGINE' was introduced in 5.5.3.

   *  Error: `1662' SQLSTATE: `HY000'
     (`ER_BINLOG_ROW_MODE_AND_STMT_ENGINE')

     Message: Cannot execute statement: impossible to write to binary
     log since BINLOG_FORMAT = ROW and at least one table uses a
     storage engine limited to statement-based logging.

     `ER_BINLOG_ROW_MODE_AND_STMT_ENGINE' was introduced in 5.5.3.

   *  Error: `1663' SQLSTATE: `HY000'
     (`ER_BINLOG_UNSAFE_AND_STMT_ENGINE')

     Message: Cannot execute statement: impossible to write to binary
     log since statement is unsafe, storage engine is limited to
     statement-based logging, and BINLOG_FORMAT = MIXED. %s

     `ER_BINLOG_UNSAFE_AND_STMT_ENGINE' was introduced in 5.5.3.

   *  Error: `1664' SQLSTATE: `HY000'
     (`ER_BINLOG_ROW_INJECTION_AND_STMT_ENGINE')

     Message: Cannot execute statement: impossible to write to binary
     log since statement is in row format and at least one table uses a
     storage engine limited to statement-based logging.

     `ER_BINLOG_ROW_INJECTION_AND_STMT_ENGINE' was introduced in 5.5.3.

   *  Error: `1665' SQLSTATE: `HY000'
     (`ER_BINLOG_STMT_MODE_AND_ROW_ENGINE')

     Message: Cannot execute statement: impossible to write to binary
     log since BINLOG_FORMAT = STATEMENT and at least one table uses a
     storage engine limited to row-based logging.%s

     `ER_BINLOG_STMT_MODE_AND_ROW_ENGINE' was introduced in 5.5.3.

   *  Error: `1666' SQLSTATE: `HY000'
     (`ER_BINLOG_ROW_INJECTION_AND_STMT_MODE')

     Message: Cannot execute statement: impossible to write to binary
     log since statement is in row format and BINLOG_FORMAT = STATEMENT.

     `ER_BINLOG_ROW_INJECTION_AND_STMT_MODE' was introduced in 5.5.3.

   *  Error: `1667' SQLSTATE: `HY000'
     (`ER_BINLOG_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE')

     Message: Cannot execute statement: impossible to write to binary
     log since more than one engine is involved and at least one engine
     is self-logging.

     `ER_BINLOG_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE' was
     introduced in 5.5.3.

   *  Error: `1668' SQLSTATE: `HY000' (`ER_BINLOG_UNSAFE_LIMIT')

     Message: The statement is unsafe because it uses a LIMIT clause.
     This is unsafe because the set of rows included cannot be
     predicted.

     `ER_BINLOG_UNSAFE_LIMIT' was introduced in 5.5.3.

   *  Error: `1669' SQLSTATE: `HY000'
     (`ER_BINLOG_UNSAFE_INSERT_DELAYED')

     Message: The statement is unsafe because it uses INSERT DELAYED.
     This is unsafe because the times when rows are inserted cannot be
     predicted.

     `ER_BINLOG_UNSAFE_INSERT_DELAYED' was introduced in 5.5.3.

   *  Error: `1670' SQLSTATE: `HY000' (`ER_BINLOG_UNSAFE_SYSTEM_TABLE')

     Message: The statement is unsafe because it uses the general log,
     slow query log, or performance_schema table(s). This is unsafe
     because system tables may differ on slaves.

     `ER_BINLOG_UNSAFE_SYSTEM_TABLE' was introduced in 5.5.3.

   *  Error: `1671' SQLSTATE: `HY000'
     (`ER_BINLOG_UNSAFE_AUTOINC_COLUMNS')

     Message: Statement is unsafe because it invokes a trigger or a
     stored function that inserts into an AUTO_INCREMENT column.
     Inserted values cannot be logged correctly.

     `ER_BINLOG_UNSAFE_AUTOINC_COLUMNS' was introduced in 5.5.3.

   *  Error: `1672' SQLSTATE: `HY000' (`ER_BINLOG_UNSAFE_UDF')

     Message: Statement is unsafe because it uses a UDF which may not
     return the same value on the slave.

     `ER_BINLOG_UNSAFE_UDF' was introduced in 5.5.3.

   *  Error: `1673' SQLSTATE: `HY000'
     (`ER_BINLOG_UNSAFE_SYSTEM_VARIABLE')

     Message: Statement is unsafe because it uses a system variable
     that may have a different value on the slave.

     `ER_BINLOG_UNSAFE_SYSTEM_VARIABLE' was introduced in 5.5.3.

   *  Error: `1674' SQLSTATE: `HY000'
     (`ER_BINLOG_UNSAFE_SYSTEM_FUNCTION')

     Message: Statement is unsafe because it uses a system function
     that may return a different value on the slave.

     `ER_BINLOG_UNSAFE_SYSTEM_FUNCTION' was introduced in 5.5.3.

   *  Error: `1675' SQLSTATE: `HY000'
     (`ER_BINLOG_UNSAFE_NONTRANS_AFTER_TRANS')

     Message: Statement is unsafe because it accesses a
     non-transactional table after accessing a transactional table
     within the same transaction.

     `ER_BINLOG_UNSAFE_NONTRANS_AFTER_TRANS' was introduced in 5.5.3.

   *  Error: `1676' SQLSTATE: `HY000' (`ER_MESSAGE_AND_STATEMENT')

     Message: %s Statement: %s

     `ER_MESSAGE_AND_STATEMENT' was introduced in 5.5.3.

   *  Error: `1677' SQLSTATE: `HY000' (`ER_SLAVE_CONVERSION_FAILED')

     Message: Column %d of table '%s.%s' cannot be converted from type
     '%s' to type '%s'

     `ER_SLAVE_CONVERSION_FAILED' was introduced in 5.5.3.

   *  Error: `1678' SQLSTATE: `HY000'
     (`ER_SLAVE_CANT_CREATE_CONVERSION')

     Message: Can't create conversion table for table '%s.%s'

     `ER_SLAVE_CANT_CREATE_CONVERSION' was introduced in 5.5.3.

   *  Error: `1679' SQLSTATE: `HY000'
     (`ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_BINLOG_FORMAT')

     Message: Cannot modify @@session.binlog_format inside a transaction

     `ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_BINLOG_FORMAT' was
     introduced in 5.5.3.

   *  Error: `1680' SQLSTATE: `HY000' (`ER_PATH_LENGTH')

     Message: The path specified for %s is too long.

     `ER_PATH_LENGTH' was introduced in 5.5.3.

   *  Error: `1681' SQLSTATE: `HY000'
     (`ER_WARN_DEPRECATED_SYNTAX_NO_REPLACEMENT')

     Message: '%s' is deprecated and will be removed in a future
     release.

     `ER_WARN_DEPRECATED_SYNTAX_NO_REPLACEMENT' was introduced in 5.5.3.

   *  Error: `1682' SQLSTATE: `HY000'
     (`ER_WRONG_NATIVE_TABLE_STRUCTURE')

     Message: Native table '%s'.'%s' has the wrong structure

     `ER_WRONG_NATIVE_TABLE_STRUCTURE' was introduced in 5.5.3.

   *  Error: `1683' SQLSTATE: `HY000' (`ER_WRONG_PERFSCHEMA_USAGE')

     Message: Invalid performance_schema usage.

     `ER_WRONG_PERFSCHEMA_USAGE' was introduced in 5.5.3.

   *  Error: `1684' SQLSTATE: `HY000' (`ER_WARN_I_S_SKIPPED_TABLE')

     Message: Table '%s'.'%s' was skipped since its definition is being
     modified by concurrent DDL statement

     `ER_WARN_I_S_SKIPPED_TABLE' was introduced in 5.5.3.

   *  Error: `1685' SQLSTATE: `HY000'
     (`ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_BINLOG_DIRECT')

     Message: Cannot modify
     @@session.binlog_direct_non_transactional_updates inside a
     transaction

     `ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_BINLOG_DIRECT' was
     introduced in 5.5.3.

   *  Error: `1686' SQLSTATE: `HY000'
     (`ER_STORED_FUNCTION_PREVENTS_SWITCH_BINLOG_DIRECT')

     Message: Cannot change the binlog direct flag inside a stored
     function or trigger

     `ER_STORED_FUNCTION_PREVENTS_SWITCH_BINLOG_DIRECT' was introduced
     in 5.5.3.

   *  Error: `1687' SQLSTATE: `42000' (`ER_SPATIAL_MUST_HAVE_GEOM_COL')

     Message: A SPATIAL index may only contain a geometrical type column

     `ER_SPATIAL_MUST_HAVE_GEOM_COL' was introduced in 5.5.2.

   *  Error: `1688' SQLSTATE: `HY000' (`ER_TOO_LONG_INDEX_COMMENT')

     Message: Comment for index '%s' is too long (max = %lu)

     `ER_TOO_LONG_INDEX_COMMENT' was introduced in 5.5.3.

   *  Error: `1689' SQLSTATE: `HY000' (`ER_LOCK_ABORTED')

     Message: Wait on a lock was aborted due to a pending exclusive lock

     `ER_LOCK_ABORTED' was introduced in 5.5.4.

   *  Error: `1690' SQLSTATE: `22003' (`ER_DATA_OUT_OF_RANGE')

     Message: %s value is out of range in '%s'

     `ER_DATA_OUT_OF_RANGE' was introduced in 5.5.5.

   *  Error: `1691' SQLSTATE: `HY000' (`ER_WRONG_SPVAR_TYPE_IN_LIMIT')

     Message: A variable of a non-integer based type in LIMIT clause

     `ER_WRONG_SPVAR_TYPE_IN_LIMIT' was introduced in 5.5.5.

   *  Error: `1692' SQLSTATE: `HY000'
     (`ER_BINLOG_UNSAFE_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE')

     Message: Mixing self-logging and non-self-logging engines in a
     statement is unsafe.

     `ER_BINLOG_UNSAFE_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE' was
     introduced in 5.5.5.

   *  Error: `1693' SQLSTATE: `HY000'
     (`ER_BINLOG_UNSAFE_MIXED_STATEMENT')

     Message: Statement accesses nontransactional table as well as
     transactional or temporary table, and writes to any of them.

     `ER_BINLOG_UNSAFE_MIXED_STATEMENT' was introduced in 5.5.5.

   *  Error: `1694' SQLSTATE: `HY000'
     (`ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_SQL_LOG_BIN')

     Message: Cannot modify @@session.sql_log_bin inside a transaction

     `ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_SQL_LOG_BIN' was introduced
     in 5.5.5.

   *  Error: `1695' SQLSTATE: `HY000'
     (`ER_STORED_FUNCTION_PREVENTS_SWITCH_SQL_LOG_BIN')

     Message: Cannot change the sql_log_bin inside a stored function or
     trigger

     `ER_STORED_FUNCTION_PREVENTS_SWITCH_SQL_LOG_BIN' was introduced in
     5.5.5.

   *  Error: `1696' SQLSTATE: `HY000' (`ER_FAILED_READ_FROM_PAR_FILE')

     Message: Failed to read from the .par file

     `ER_FAILED_READ_FROM_PAR_FILE' was introduced in 5.5.5.

   *  Error: `1697' SQLSTATE: `HY000'
     (`ER_VALUES_IS_NOT_INT_TYPE_ERROR')

     Message: VALUES value for partition '%s' must have type INT

     `ER_VALUES_IS_NOT_INT_TYPE_ERROR' was introduced in 5.5.7.

   *  Error: `1698' SQLSTATE: `28000'
     (`ER_ACCESS_DENIED_NO_PASSWORD_ERROR')

     Message: Access denied for user '%s'@'%s'

     `ER_ACCESS_DENIED_NO_PASSWORD_ERROR' was introduced in 5.5.7.

   *  Error: `1699' SQLSTATE: `HY000' (`ER_SET_PASSWORD_AUTH_PLUGIN')

     Message: SET PASSWORD has no significance for users authenticating
     via plugins

     `ER_SET_PASSWORD_AUTH_PLUGIN' was introduced in 5.5.7.

   *  Error: `1700' SQLSTATE: `HY000' (`ER_GRANT_PLUGIN_USER_EXISTS')

     Message: GRANT with IDENTIFIED WITH is illegal because the user
     %-.*s already exists

     `ER_GRANT_PLUGIN_USER_EXISTS' was introduced in 5.5.7.

   *  Error: `1701' SQLSTATE: `42000' (`ER_TRUNCATE_ILLEGAL_FK')

     Message: Cannot truncate a table referenced in a foreign key
     constraint (%s)

     `ER_TRUNCATE_ILLEGAL_FK' was introduced in 5.5.7.

   *  Error: `1702' SQLSTATE: `HY000' (`ER_PLUGIN_IS_PERMANENT')

     Message: Plugin '%s' is force_plus_permanent and can not be
     unloaded

     `ER_PLUGIN_IS_PERMANENT' was introduced in 5.5.7.

   *  Error: `1703' SQLSTATE: `HY000'
     (`ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE_MIN')

     Message: The requested value for the heartbeat period is less than
     1 millisecond. The value is reset to 0, meaning that heartbeating
     will effectively be disabled.

     `ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE_MIN' was introduced in
     5.5.7.

   *  Error: `1704' SQLSTATE: `HY000'
     (`ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE_MAX')

     Message: The requested value for the heartbeat period exceeds the
     value of `slave_net_timeout' seconds. A sensible value for the
     period should be less than the timeout.

     `ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE_MAX' was introduced in
     5.5.7.

   *  Error: `1705' SQLSTATE: `HY000' (`ER_STMT_CACHE_FULL')

     Message: Multi-row statements required more than
     'max_binlog_stmt_cache_size' bytes of storage; increase this
     mysqld variable and try again

     `ER_STMT_CACHE_FULL' was introduced in 5.5.9.

   *  Error: `1706' SQLSTATE: `HY000' (`ER_MULTI_UPDATE_KEY_CONFLICT')

     Message: Primary key/partition key update is not allowed since the
     table is updated both as '%s' and '%s'.

     `ER_MULTI_UPDATE_KEY_CONFLICT' was introduced in 5.5.11.

   *  Error: `1707' SQLSTATE: `HY000' (`ER_TABLE_NEEDS_REBUILD')

     Message: Table rebuild required. Please do "ALTER TABLE `%s`
     FORCE" or dump/reload to fix it!

     `ER_TABLE_NEEDS_REBUILD' was introduced in 5.5.11.

   *  Error: `1708' SQLSTATE: `HY000' (`WARN_OPTION_BELOW_LIMIT')

     Message: The value of '%s' should be no less than the value of '%s'

     `WARN_OPTION_BELOW_LIMIT' was introduced in 5.5.12.

   *  Error: `1709' SQLSTATE: `HY000' (`ER_INDEX_COLUMN_TOO_LONG')

     Message: Index column size too large. The maximum column size is
     %lu bytes.

     `ER_INDEX_COLUMN_TOO_LONG' was introduced in 5.5.14.

   *  Error: `1710' SQLSTATE: `HY000' (`ER_ERROR_IN_TRIGGER_BODY')

     Message: Trigger '%s' has an error in its body: '%s'

     `ER_ERROR_IN_TRIGGER_BODY' was introduced in 5.5.15.

   *  Error: `1711' SQLSTATE: `HY000'
     (`ER_ERROR_IN_UNKNOWN_TRIGGER_BODY')

     Message: Unknown trigger has an error in its body: '%s'

     `ER_ERROR_IN_UNKNOWN_TRIGGER_BODY' was introduced in 5.5.15.

   *  Error: `1712' SQLSTATE: `HY000' (`ER_INDEX_CORRUPT')

     Message: Index %s is corrupted

     `ER_INDEX_CORRUPT' was introduced in 5.5.17.

   *  Error: `1713' SQLSTATE: `HY000' (`ER_UNDO_RECORD_TOO_BIG')

     Message: Undo log record is too big.

     `ER_UNDO_RECORD_TOO_BIG' was introduced in 5.5.17.

   *  Error: `1714' SQLSTATE: `HY000'
     (`ER_BINLOG_UNSAFE_INSERT_IGNORE_SELECT')

     Message: INSERT IGNORE... SELECT is unsafe because the order in
     which rows are retrieved by the SELECT determines which (if any)
     rows are ignored. This order cannot be predicted and may differ on
     master and the slave.

     `ER_BINLOG_UNSAFE_INSERT_IGNORE_SELECT' was introduced in 5.5.18.

   *  Error: `1715' SQLSTATE: `HY000'
     (`ER_BINLOG_UNSAFE_INSERT_SELECT_UPDATE')

     Message: INSERT... SELECT... ON DUPLICATE KEY UPDATE is unsafe
     because the order in which rows are retrieved by the SELECT
     determines which (if any) rows are updated. This order cannot be
     predicted and may differ on master and the slave.

     `ER_BINLOG_UNSAFE_INSERT_SELECT_UPDATE' was introduced in 5.5.18.

   *  Error: `1716' SQLSTATE: `HY000'
     (`ER_BINLOG_UNSAFE_REPLACE_SELECT')

     Message: REPLACE... SELECT is unsafe because the order in which
     rows are retrieved by the SELECT determines which (if any) rows
     are replaced. This order cannot be predicted and may differ on
     master and the slave.

     `ER_BINLOG_UNSAFE_REPLACE_SELECT' was introduced in 5.5.18.

   *  Error: `1717' SQLSTATE: `HY000'
     (`ER_BINLOG_UNSAFE_CREATE_IGNORE_SELECT')

     Message: CREATE... IGNORE SELECT is unsafe because the order in
     which rows are retrieved by the SELECT determines which (if any)
     rows are ignored. This order cannot be predicted and may differ on
     master and the slave.

     `ER_BINLOG_UNSAFE_CREATE_IGNORE_SELECT' was introduced in 5.5.18.

   *  Error: `1718' SQLSTATE: `HY000'
     (`ER_BINLOG_UNSAFE_CREATE_REPLACE_SELECT')

     Message: CREATE... REPLACE SELECT is unsafe because the order in
     which rows are retrieved by the SELECT determines which (if any)
     rows are replaced. This order cannot be predicted and may differ
     on master and the slave.

     `ER_BINLOG_UNSAFE_CREATE_REPLACE_SELECT' was introduced in 5.5.18.

   *  Error: `1719' SQLSTATE: `HY000' (`ER_BINLOG_UNSAFE_UPDATE_IGNORE')

     Message: UPDATE IGNORE is unsafe because the order in which rows
     are updated determines which (if any) rows are ignored. This order
     cannot be predicted and may differ on master and the slave.

     `ER_BINLOG_UNSAFE_UPDATE_IGNORE' was introduced in 5.5.18.

   *  Error: `1720' SQLSTATE: `HY000' (`ER_PLUGIN_NO_UNINSTALL')

     Message: Plugin '%s' is marked as not dynamically uninstallable.
     You have to stop the server to uninstall it.

     `ER_PLUGIN_NO_UNINSTALL' was introduced in 5.5.16.

   *  Error: `1721' SQLSTATE: `HY000' (`ER_PLUGIN_NO_INSTALL')

     Message: Plugin '%s' is marked as not dynamically installable. You
     have to stop the server to install it.

     `ER_PLUGIN_NO_INSTALL' was introduced in 5.5.16.

   *  Error: `1722' SQLSTATE: `HY000'
     (`ER_BINLOG_UNSAFE_WRITE_AUTOINC_SELECT')

     Message: Statements writing to a table with an auto-increment
     column after selecting from another table are unsafe because the
     order in which rows are retrieved determines what (if any) rows
     will be written. This order cannot be predicted and may differ on
     master and the slave.

     `ER_BINLOG_UNSAFE_WRITE_AUTOINC_SELECT' was introduced in 5.5.22.

   *  Error: `1723' SQLSTATE: `HY000'
     (`ER_BINLOG_UNSAFE_CREATE_SELECT_AUTOINC')

     Message: CREATE TABLE... SELECT... on a table with an
     auto-increment column is unsafe because the order in which rows
     are retrieved by the SELECT determines which (if any) rows are
     inserted. This order cannot be predicted and may differ on master
     and the slave.

     `ER_BINLOG_UNSAFE_CREATE_SELECT_AUTOINC' was introduced in 5.5.22.

   *  Error: `1724' SQLSTATE: `HY000'
     (`ER_BINLOG_UNSAFE_INSERT_TWO_KEYS')

     Message: INSERT... ON DUPLICATE KEY UPDATE on a table with more
     than one UNIQUE KEY is unsafe

     `ER_BINLOG_UNSAFE_INSERT_TWO_KEYS' was introduced in 5.5.24.

   *  Error: `1725' SQLSTATE: `HY000' (`ER_TABLE_IN_FK_CHECK')

     Message: Table is being used in foreign key check.

     `ER_TABLE_IN_FK_CHECK' was introduced in 5.5.24.

   *  Error: `1726' SQLSTATE: `HY000' (`ER_UNSUPPORTED_ENGINE')

     Message: Storage engine '%s' does not support system tables.
     [%s.%s]

     `ER_UNSUPPORTED_ENGINE' was introduced in 5.5.24.

   *  Error: `1727' SQLSTATE: `HY000'
     (`ER_BINLOG_UNSAFE_AUTOINC_NOT_FIRST')

     Message: INSERT into autoincrement field which is not the first
     part in the composed primary key is unsafe.

     `ER_BINLOG_UNSAFE_AUTOINC_NOT_FIRST' was introduced in 5.5.25.


File: manual.info,  Node: error-messages-client,  Next: problems,  Prev: error-messages-server,  Up: error-handling

C.4 Client Error Codes and Messages
===================================

Client error information comes from the following source files:

   * The Error values and the symbols in parentheses correspond to
     definitions in the `include/errmsg.h' MySQL source file.

   * The Message values correspond to the error messages that are
     listed in the `libmysql/errmsg.c' file.  `%d' and `%s' represent
     numbers and strings, respectively, that are substituted into the
     messages when they are displayed.

Because updates are frequent, it is possible that those files will
contain additional error information not listed here.

   *  Error: `2000' (`CR_UNKNOWN_ERROR')

     Message: Unknown MySQL error

   *  Error: `2001' (`CR_SOCKET_CREATE_ERROR')

     Message: Can't create UNIX socket (%d)

   *  Error: `2002' (`CR_CONNECTION_ERROR')

     Message: Can't connect to local MySQL server through socket '%s'
     (%d)

   *  Error: `2003' (`CR_CONN_HOST_ERROR')

     Message: Can't connect to MySQL server on '%s' (%d)

   *  Error: `2004' (`CR_IPSOCK_ERROR')

     Message: Can't create TCP/IP socket (%d)

   *  Error: `2005' (`CR_UNKNOWN_HOST')

     Message: Unknown MySQL server host '%s' (%d)

   *  Error: `2006' (`CR_SERVER_GONE_ERROR')

     Message: MySQL server has gone away

   *  Error: `2007' (`CR_VERSION_ERROR')

     Message: Protocol mismatch; server version = %d, client version =
     %d

   *  Error: `2008' (`CR_OUT_OF_MEMORY')

     Message: MySQL client ran out of memory

   *  Error: `2009' (`CR_WRONG_HOST_INFO')

     Message: Wrong host info

   *  Error: `2010' (`CR_LOCALHOST_CONNECTION')

     Message: Localhost via UNIX socket

   *  Error: `2011' (`CR_TCP_CONNECTION')

     Message: %s via TCP/IP

   *  Error: `2012' (`CR_SERVER_HANDSHAKE_ERR')

     Message: Error in server handshake

   *  Error: `2013' (`CR_SERVER_LOST')

     Message: Lost connection to MySQL server during query

   *  Error: `2014' (`CR_COMMANDS_OUT_OF_SYNC')

     Message: Commands out of sync; you can't run this command now

   *  Error: `2015' (`CR_NAMEDPIPE_CONNECTION')

     Message: Named pipe: %s

   *  Error: `2016' (`CR_NAMEDPIPEWAIT_ERROR')

     Message: Can't wait for named pipe to host: %s pipe: %s (%lu)

   *  Error: `2017' (`CR_NAMEDPIPEOPEN_ERROR')

     Message: Can't open named pipe to host: %s pipe: %s (%lu)

   *  Error: `2018' (`CR_NAMEDPIPESETSTATE_ERROR')

     Message: Can't set state of named pipe to host: %s pipe: %s (%lu)

   *  Error: `2019' (`CR_CANT_READ_CHARSET')

     Message: Can't initialize character set %s (path: %s)

   *  Error: `2020' (`CR_NET_PACKET_TOO_LARGE')

     Message: Got packet bigger than 'max_allowed_packet' bytes

   *  Error: `2021' (`CR_EMBEDDED_CONNECTION')

     Message: Embedded server

   *  Error: `2022' (`CR_PROBE_SLAVE_STATUS')

     Message: Error on SHOW SLAVE STATUS:

   *  Error: `2023' (`CR_PROBE_SLAVE_HOSTS')

     Message: Error on SHOW SLAVE HOSTS:

   *  Error: `2024' (`CR_PROBE_SLAVE_CONNECT')

     Message: Error connecting to slave:

   *  Error: `2025' (`CR_PROBE_MASTER_CONNECT')

     Message: Error connecting to master:

   *  Error: `2026' (`CR_SSL_CONNECTION_ERROR')

     Message: SSL connection error: %s

   *  Error: `2027' (`CR_MALFORMED_PACKET')

     Message: Malformed packet

   *  Error: `2028' (`CR_WRONG_LICENSE')

     Message: This client library is licensed only for use with MySQL
     servers having '%s' license

   *  Error: `2029' (`CR_NULL_POINTER')

     Message: Invalid use of null pointer

   *  Error: `2030' (`CR_NO_PREPARE_STMT')

     Message: Statement not prepared

   *  Error: `2031' (`CR_PARAMS_NOT_BOUND')

     Message: No data supplied for parameters in prepared statement

   *  Error: `2032' (`CR_DATA_TRUNCATED')

     Message: Data truncated

   *  Error: `2033' (`CR_NO_PARAMETERS_EXISTS')

     Message: No parameters exist in the statement

   *  Error: `2034' (`CR_INVALID_PARAMETER_NO')

     Message: Invalid parameter number

   *  Error: `2035' (`CR_INVALID_BUFFER_USE')

     Message: Can't send long data for non-string/non-binary data types
     (parameter: %d)

   *  Error: `2036' (`CR_UNSUPPORTED_PARAM_TYPE')

     Message: Using unsupported buffer type: %d (parameter: %d)

   *  Error: `2037' (`CR_SHARED_MEMORY_CONNECTION')

     Message: Shared memory: %s

   *  Error: `2038' (`CR_SHARED_MEMORY_CONNECT_REQUEST_ERROR')

     Message: Can't open shared memory; client could not create request
     event (%lu)

   *  Error: `2039' (`CR_SHARED_MEMORY_CONNECT_ANSWER_ERROR')

     Message: Can't open shared memory; no answer event received from
     server (%lu)

   *  Error: `2040' (`CR_SHARED_MEMORY_CONNECT_FILE_MAP_ERROR')

     Message: Can't open shared memory; server could not allocate file
     mapping (%lu)

   *  Error: `2041' (`CR_SHARED_MEMORY_CONNECT_MAP_ERROR')

     Message: Can't open shared memory; server could not get pointer to
     file mapping (%lu)

   *  Error: `2042' (`CR_SHARED_MEMORY_FILE_MAP_ERROR')

     Message: Can't open shared memory; client could not allocate file
     mapping (%lu)

   *  Error: `2043' (`CR_SHARED_MEMORY_MAP_ERROR')

     Message: Can't open shared memory; client could not get pointer to
     file mapping (%lu)

   *  Error: `2044' (`CR_SHARED_MEMORY_EVENT_ERROR')

     Message: Can't open shared memory; client could not create %s
     event (%lu)

   *  Error: `2045' (`CR_SHARED_MEMORY_CONNECT_ABANDONED_ERROR')

     Message: Can't open shared memory; no answer from server (%lu)

   *  Error: `2046' (`CR_SHARED_MEMORY_CONNECT_SET_ERROR')

     Message: Can't open shared memory; cannot send request event to
     server (%lu)

   *  Error: `2047' (`CR_CONN_UNKNOW_PROTOCOL')

     Message: Wrong or unknown protocol

   *  Error: `2048' (`CR_INVALID_CONN_HANDLE')

     Message: Invalid connection handle

   *  Error: `2049' (`CR_SECURE_AUTH')

     Message: Connection using old (pre-4.1.1) authentication protocol
     refused (client option 'secure_auth' enabled)

   *  Error: `2050' (`CR_FETCH_CANCELED')

     Message: Row retrieval was canceled by mysql_stmt_close() call

   *  Error: `2051' (`CR_NO_DATA')

     Message: Attempt to read column without prior row fetch

   *  Error: `2052' (`CR_NO_STMT_METADATA')

     Message: Prepared statement contains no metadata

   *  Error: `2053' (`CR_NO_RESULT_SET')

     Message: Attempt to read a row while there is no result set
     associated with the statement

   *  Error: `2054' (`CR_NOT_IMPLEMENTED')

     Message: This feature is not implemented yet

   *  Error: `2055' (`CR_SERVER_LOST_EXTENDED')

     Message: Lost connection to MySQL server at '%s', system error: %d

   *  Error: `2056' (`CR_STMT_CLOSED')

     Message: Statement closed indirectly because of a preceeding %s()
     call

   *  Error: `2057' (`CR_NEW_STMT_METADATA')

     Message: The number of columns in the result set differs from the
     number of bound buffers. You must reset the statement, rebind the
     result set columns, and execute the statement again

   *  Error: `2058' (`CR_ALREADY_CONNECTED')

     Message: This handle is already connected. Use a separate handle
     for each connection.

   *  Error: `2059' (`CR_AUTH_PLUGIN_CANNOT_LOAD')

     Message: Authentication plugin '%s' cannot be loaded: %s

     `CR_AUTH_PLUGIN_CANNOT_LOAD' was introduced in 5.5.7.


File: manual.info,  Node: problems,  Prev: error-messages-client,  Up: error-handling

C.5 Problems and Common Errors
==============================

* Menu:

* what-is-crashing::             How to Determine What Is Causing a Problem
* common-errors::                Common Errors When Using MySQL Programs
* installation-issues::          Installation-Related Issues
* administration-issues::        Administration-Related Issues
* query-issues::                 Query-Related Issues
* optimizer-issues::             Optimizer-Related Issues
* table-definition-issues::      Table Definition-Related Issues
* bugs::                         Known Issues in MySQL

This section lists some common problems and error messages that you may
encounter. It describes how to determine the causes of the problems and
what to do to solve them.


File: manual.info,  Node: what-is-crashing,  Next: common-errors,  Prev: problems,  Up: problems

C.5.1 How to Determine What Is Causing a Problem
------------------------------------------------

When you run into a problem, the first thing you should do is to find
out which program or piece of equipment is causing it:

   * If you have one of the following symptoms, then it is probably a
     hardware problems (such as memory, motherboard, CPU, or hard disk)
     or kernel problem:

        * The keyboard does not work. This can normally be checked by
          pressing the Caps Lock key. If the Caps Lock light does not
          change, you have to replace your keyboard.  (Before doing
          this, you should try to restart your computer and check all
          cables to the keyboard.)

        * The mouse pointer does not move.

        * The machine does not answer to a remote machine's pings.

        * Other programs that are not related to MySQL do not behave
          correctly.

        * Your system restarted unexpectedly. (A faulty user-level
          program should never be able to take down your system.)

     In this case, you should start by checking all your cables and run
     some diagnostic tool to check your hardware! You should also check
     whether there are any patches, updates, or service packs for your
     operating system that could likely solve your problem. Check also
     that all your libraries (such as `glibc') are up to date.

     It is always good to use a machine with ECC memory to discover
     memory problems early.

   * If your keyboard is locked up, you may be able to recover by
     logging in to your machine from another machine and executing
     `kbd_mode -a'.

   * Please examine your system log file (`/var/log/messages' or
     similar) for reasons for your problem. If you think the problem is
     in MySQL, you should also examine MySQL's log files. See *Note
     server-logs::.

   * If you do not think you have hardware problems, you should try to
     find out which program is causing problems. Try using `top', `ps',
     Task Manager, or some similar program, to check which program is
     taking all CPU or is locking the machine.

   * Use `top', `df', or a similar program to check whether you are out
     of memory, disk space, file descriptors, or some other critical
     resource.

   * If the problem is some runaway process, you can always try to kill
     it. If it does not want to die, there is probably a bug in the
     operating system.

If after you have examined all other possibilities and you have
concluded that the MySQL server or a MySQL client is causing the
problem, it is time to create a bug report for our mailing list or our
support team. In the bug report, try to give a very detailed
description of how the system is behaving and what you think is
happening. You should also state why you think that MySQL is causing
the problem. Take into consideration all the situations in this
chapter. State any problems exactly how they appear when you examine
your system. Use the `copy and paste' method for any output and error
messages from programs and log files.

Try to describe in detail which program is not working and all symptoms
you see. We have in the past received many bug reports that state only
`the system does not work.' This provides us with no information about
what could be the problem.

If a program fails, it is always useful to know the following
information:

   * Has the program in question made a segmentation fault (did it dump
     core)?

   * Is the program taking up all available CPU time? Check with `top'.
     Let the program run for a while, it may simply be evaluating
     something computationally intensive.

   * If the *Note `mysqld': mysqld. server is causing problems, can you
     get any response from it with *Note `mysqladmin -u root ping':
     mysqladmin. or *Note `mysqladmin -u root processlist': mysqladmin.?

   * What does a client program say when you try to connect to the
     MySQL server? (Try with *Note `mysql': mysql, for example.) Does
     the client jam? Do you get any output from the program?

When sending a bug report, you should follow the outline described in
*Note bug-reports::.


File: manual.info,  Node: common-errors,  Next: installation-issues,  Prev: what-is-crashing,  Up: problems

C.5.2 Common Errors When Using MySQL Programs
---------------------------------------------

* Menu:

* error-access-denied::          `Access denied'
* can-not-connect-to-server::    `Can't connect to [local] MySQL server'
* error-lost-connection::        `Lost connection to MySQL server'
* old-client::                   `Client does not support authentication protocol'
* password-too-long::            Password Fails When Entered Interactively
* blocked-host::                 `Host 'HOST_NAME' is blocked'
* too-many-connections::         `Too many connections'
* out-of-memory::                `Out of memory'
* gone-away::                    `MySQL server has gone away'
* packet-too-large::             Packet Too Large
* communication-errors::         Communication Errors and Aborted Connections
* full-table::                   `The table is full'
* cannot-create::                `Can't create/write to file'
* commands-out-of-sync::         `Commands out of sync'
* ignoring-user::                `Ignoring user'
* cannot-find-table::            `Table 'TBL_NAME' doesn't exist'
* cannot-initialize-character-set::  `Can't initialize character set'
* not-enough-file-handles::      `'FILE' Not Found' and Similar Errors
* table-corruption::             Table-Corruption Issues

This section lists some errors that users frequently encounter when
running MySQL programs. Although the problems show up when you try to
run client programs, the solutions to many of the problems involves
changing the configuration of the MySQL server.


File: manual.info,  Node: error-access-denied,  Next: can-not-connect-to-server,  Prev: common-errors,  Up: common-errors

C.5.2.1 `Access denied'
.......................

An `Access denied' error can have many causes. Often the problem is
related to the MySQL accounts that the server permits client programs
to use when connecting. See *Note privilege-system::, and *Note
access-denied::.


File: manual.info,  Node: can-not-connect-to-server,  Next: error-lost-connection,  Prev: error-access-denied,  Up: common-errors

C.5.2.2 `Can't connect to [local] MySQL server'
...............................................

* Menu:

* can-not-connect-to-server-on-windows::  `Connection to MySQL Server Failing on Windows'

A MySQL client on Unix can connect to the *Note `mysqld': mysqld.
server in two different ways: By using a Unix socket file to connect
through a file in the file system (default `/tmp/mysql.sock'), or by
using TCP/IP, which connects through a port number. A Unix socket file
connection is faster than TCP/IP, but can be used only when connecting
to a server on the same computer. A Unix socket file is used if you do
not specify a host name or if you specify the special host name
`localhost'.

If the MySQL server is running on Windows, you can connect using
TCP/IP. If the server is started with the `--enable-named-pipe' option,
you can also connect with named pipes if you run the client on the host
where the server is running. The name of the named pipe is `MySQL' by
default. If you do not give a host name when connecting to *Note
`mysqld': mysqld, a MySQL client first tries to connect to the named
pipe. If that does not work, it connects to the TCP/IP port. You can
force the use of named pipes on Windows by using `.' as the host name.

The error (2002) `Can't connect to ...' normally means that there is no
MySQL server running on the system or that you are using an incorrect
Unix socket file name or TCP/IP port number when trying to connect to
the server. You should also check that the TCP/IP port you are using
has not been blocked by a firewall or port blocking service.

The error (2003) `Can't connect to MySQL server on 'SERVER' (10061)'
indicates that the network connection has been refused. You should
check that there is a MySQL server running, that it has network
connections enabled, and that the network port you specified is the one
configured on the server.

Start by checking whether there is a process named *Note `mysqld':
mysqld. running on your server host. (Use `ps xa | grep mysqld' on Unix
or the Task Manager on Windows.) If there is no such process, you should
start the server. See *Note starting-server::.

If a *Note `mysqld': mysqld. process is running, you can check it by
trying the following commands. The port number or Unix socket file name
might be different in your setup.  `host_ip' represents the IP address
of the machine where the server is running.

     shell> mysqladmin version
     shell> mysqladmin variables
     shell> mysqladmin -h `hostname` version variables
     shell> mysqladmin -h `hostname` --port=3306 version
     shell> mysqladmin -h host_ip version
     shell> mysqladmin --protocol=SOCKET --socket=/tmp/mysql.sock version

Note the use of backticks rather than forward quotation marks with the
`hostname' command; these cause the output of `hostname' (that is, the
current host name) to be substituted into the *Note `mysqladmin':
mysqladmin. command. If you have no `hostname' command or are running
on Windows, you can manually type the host name of your machine (without
backticks) following the `-h' option. You can also try `-h 127.0.0.1'
to connect with TCP/IP to the local host.

Make sure that the server has not been configured to ignore network
connections or (if you are attempting to connect remotely) that it has
not been configured to listen only locally on its network interfaces.
If the server was started with `--skip-networking', it will not accept
TCP/IP connections at all. If the server was started with
`--bind-address=127.0.0.1', it will listen for TCP/IP connections only
locally on the loopback interface and will not accept remote
connections.

Check to make sure that there is no firewall blocking access to MySQL.
Your firewall may be configured on the basis of the application being
executed, or the port number used by MySQL for communication (3306 by
default). Under Linux or Unix, check your IP tables (or similar)
configuration to ensure that the port has not been blocked. Under
Windows, applications such as ZoneAlarm or the Windows XP personal
firewall may need to be configured not to block the MySQL port.

Here are some reasons the `Can't connect to local MySQL server' error
might occur:

   * *Note `mysqld': mysqld. is not running on the local host. Check
     your operating system's process list to ensure the *Note `mysqld':
     mysqld. process is present.

   * You're running a MySQL server on Windows with many TCP/IP
     connections to it. If you're experiencing that quite often your
     clients get that error, you can find a workaround here: *Note
     can-not-connect-to-server-on-windows::.

   * Someone has removed the Unix socket file that *Note `mysqld':
     mysqld. uses (`/tmp/mysql.sock' by default). For example, you
     might have a `cron' job that removes old files from the `/tmp'
     directory. You can always run *Note `mysqladmin version':
     mysqladmin. to check whether the Unix socket file that *Note
     `mysqladmin': mysqladmin. is trying to use really exists. The fix
     in this case is to change the `cron' job to not remove
     `mysql.sock' or to place the socket file somewhere else. See *Note
     problems-with-mysql-sock::.

   * You have started the *Note `mysqld': mysqld. server with the
     `--socket=/path/to/socket' option, but forgotten to tell client
     programs the new name of the socket file. If you change the socket
     path name for the server, you must also notify the MySQL clients.
     You can do this by providing the same `--socket' option when you
     run client programs. You also need to ensure that clients have
     permission to access the `mysql.sock' file. To find out where the
     socket file is, you can do:

          shell> netstat -ln | grep mysql

     See *Note problems-with-mysql-sock::.

   * You are using Linux and one server thread has died (dumped core).
     In this case, you must kill the other *Note `mysqld': mysqld.
     threads (for example, with *Note `kill': kill. or with the *Note
     `mysql_zap': mysql-zap. script) before you can restart the MySQL
     server. See *Note crashing::.

   * The server or client program might not have the proper access
     privileges for the directory that holds the Unix socket file or
     the socket file itself. In this case, you must either change the
     access privileges for the directory or socket file so that the
     server and clients can access them, or restart *Note `mysqld':
     mysqld. with a `--socket' option that specifies a socket file name
     in a directory where the server can create it and where client
     programs can access it.

If you get the error message `Can't connect to MySQL server on
some_host', you can try the following things to find out what the
problem is:

   * Check whether the server is running on that host by executing
     `telnet some_host 3306' and pressing the Enter key a couple of
     times. (3306 is the default MySQL port number. Change the value if
     your server is listening to a different port.) If there is a MySQL
     server running and listening to the port, you should get a
     response that includes the server's version number. If you get an
     error such as `telnet: Unable to connect to remote host:
     Connection refused', then there is no server running on the given
     port.

   * If the server is running on the local host, try using *Note
     `mysqladmin -h localhost variables': mysqladmin. to connect using
     the Unix socket file. Verify the TCP/IP port number that the
     server is configured to listen to (it is the value of the `port'
     variable.)

   * If you are running under Linux and Security-Enhanced Linux
     (SELinux) is enabled, make sure you have disabled SELinux
     protection for the `mysqld' process.


File: manual.info,  Node: can-not-connect-to-server-on-windows,  Prev: can-not-connect-to-server,  Up: can-not-connect-to-server

C.5.2.3 `Connection to MySQL Server Failing on Windows'
.......................................................

When you're running a MySQL server on Windows with many TCP/IP
connections to it, and you're experiencing that quite often your
clients get a `Can't connect to MySQL server' error, the reason might
be that Windows does not allow for enough ephemeral (short-lived) ports
to serve those connections.

The purpose of `TIME_WAIT' is to keep a connection accepting packets
even after the connection has been closed. This is because Internet
routing can cause a packet to take a slow route to its destination and
it may arrive after both sides have agreed to close. If the port is in
use for a new connection, that packet from the old connection could
break the protocol or compromise personal information from the original
connection. The `TIME_WAIT' delay prevents this by ensuring that the
port cannot be reused until after some time has been permitted for
those delayed packets to arrive.

It is safe to reduce `TIME_WAIT' greatly on LAN connections because
there is little chance of packets arriving at very long delays, as they
could through the Internet with its comparatively large distances and
latencies.

Windows permits ephemeral (short-lived) TCP ports to the user. After
any port is closed it will remain in a `TIME_WAIT' status for 120
seconds. The port will not be available again until this time expires.
The default range of port numbers depends on the version of Windows,
with a more limited number of ports in older versions:

   * Windows through Server 2003: Ports in range 1025-5000

   * Windows Vista, Server 2008, and newer: Ports in range 49152-65535

With a small stack of available TCP ports (5000) and a high number of
TCP ports being open and closed over a short period of time along with
the `TIME_WAIT' status you have a good chance for running out of ports.
There are two ways to address this problem:

   * Reduce the number of TCP ports consumed quickly by investigating
     connection pooling or persistent connections where possible

   * Tune some settings in the Windows registry (see below)

* IMPORTANT: The following procedure involves modifying the Windows
registry. Before you modify the registry, make sure to back it up and
make sure that you understand how to restore the registry if a problem
occurs.  For information about how to back up, restore, and edit the
registry, view the following article in the Microsoft Knowledge Base:
`http://support.microsoft.com/kb/256986/EN-US/'.  *

  1. Start Registry Editor (`Regedt32.exe').

  2. Locate the following key in the registry:

          HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters

  3. On the `Edit' menu, click `Add Value', and then add the following
     registry value:

          Value Name: MaxUserPort
          Data Type: REG_DWORD
          Value: 65534

     This sets the number of ephemeral ports available to any user. The
     valid range is between 5000 and 65534 (decimal). The default value
     is 0x1388 (5000 decimal).

  4. On the `Edit' menu, click `Add Value', and then add the following
     registry value:

          Value Name: TcpTimedWaitDelay
          Data Type: REG_DWORD
          Value: 30

     This sets the number of seconds to hold a TCP port connection in
     `TIME_WAIT' state before closing. The valid range is between 0
     (zero) and 300 (decimal). The default value is 0x78 (120 decimal).

  5. Quit Registry Editor.

  6. Reboot the machine.

Note: Undoing the above should be as simple as deleting the registry
entries you've created.


File: manual.info,  Node: error-lost-connection,  Next: old-client,  Prev: can-not-connect-to-server,  Up: common-errors

C.5.2.4 `Lost connection to MySQL server'
.........................................

There are three likely causes for this error message.

Usually it indicates network connectivity trouble and you should check
the condition of your network if this error occurs frequently. If the
error message includes `during query,' this is probably the case you
are experiencing.

Sometimes the `during query' form happens when millions of rows are
being sent as part of one or more queries. If you know that this is
happening, you should try increasing `net_read_timeout' from its
default of 30 seconds to 60 seconds or longer, sufficient for the data
transfer to complete.

More rarely, it can happen when the client is attempting the initial
connection to the server. In this case, if your `connect_timeout' value
is set to only a few seconds, you may be able to resolve the problem by
increasing it to ten seconds, perhaps more if you have a very long
distance or slow connection. You can determine whether you are
experiencing this more uncommon cause by using `SHOW GLOBAL STATUS LIKE
'Aborted_connects''.  It will increase by one for each initial
connection attempt that the server aborts. You may see `reading
authorization packet' as part of the error message; if so, that also
suggests that this is the solution that you need.

If the cause is none of those just described, you may be experiencing a
problem with *Note `BLOB': blob. values that are larger than
`max_allowed_packet', which can cause this error with some clients.
Sometime you may see an `ER_NET_PACKET_TOO_LARGE' error, and that
confirms that you need to increase `max_allowed_packet'.


File: manual.info,  Node: old-client,  Next: password-too-long,  Prev: error-lost-connection,  Up: common-errors

C.5.2.5 `Client does not support authentication protocol'
.........................................................

The current implementation of the authentication protocol uses a
password hashing algorithm that is incompatible with that used by older
(pre-4.1) clients. Attempts to connect to a 4.1 or newer server with an
older client may fail with the following message:

     shell> mysql
     Client does not support authentication protocol requested
     by server; consider upgrading MySQL client

To deal with this problem, the preferred solution is to upgrade all
client programs to use a 4.1.1 or newer client library. If that is not
possible, use one of the following approaches:

   * To connect to the server with a pre-4.1 client program, use an
     account that still has a pre-4.1-style password.

   * Reset the password to pre-4.1 style for each user that needs to
     use a pre-4.1 client program. This can be done using the *Note
     `SET PASSWORD': set-password.  statement and the `OLD_PASSWORD()'
     function:

          mysql> SET PASSWORD FOR
              -> 'SOME_USER'@'SOME_HOST' = OLD_PASSWORD('NEWPWD');

     Substitute the password you want to use for `NEWPWD' in the
     preceding example. MySQL cannot tell you what the original
     password was, so you'll need to pick a new one.

   * Tell the server to use the older password hashing algorithm by
     default:

       1. Start *Note `mysqld': mysqld. with the `old_passwords' system
          variable set to 1.

       2. Assign an old-format password to each account that has had
          its password updated to the longer 4.1 format. You can
          identify these accounts with the following query:

               mysql> SELECT Host, User, Password FROM mysql.user
                   -> WHERE LENGTH(Password) > 16;

          For each account record displayed by the query, use the
          `Host' and `User' values and assign a password using one of
          the methods described previously.

The `Client does not support authentication protocol' error also can
occur if multiple versions of MySQL are installed but client programs
are dynamically linked and link to an older library. Make sure that
clients use the most recent library version with which they are
compatible. The procedure to do this will depend on your system.

*Note*:

The `mysql' extension does not support the authentication protocol in
MySQL 4.1.1 and higher. This is true regardless of the PHP version
being used. If you wish to use the `mysql' extension with MySQL 4.1 or
newer, you may need to follow one of the options discussed above for
configuring MySQL to work with old clients. The `mysqli' extension
(stands for "MySQL, Improved"; added in PHP 5) is compatible with the
improved password hashing employed in MySQL 4.1 and higher, and no
special configuration of MySQL need be done to use this MySQL client
library. For more information about the `mysqli' extension, see
`http://php.net/mysqli'.

For additional background on password hashing and authentication, see
*Note password-hashing::.


File: manual.info,  Node: password-too-long,  Next: blocked-host,  Prev: old-client,  Up: common-errors

C.5.2.6 Password Fails When Entered Interactively
.................................................

MySQL client programs prompt for a password when invoked with a
`--password' or `-p' option that has no following password value:

     shell> mysql -u USER_NAME -p
     Enter password:

On some systems, you may find that your password works when specified
in an option file or on the command line, but not when you enter it
interactively at the `Enter password:' prompt. This occurs when the
library provided by the system to read passwords limits password values
to a small number of characters (typically eight). That is a problem
with the system library, not with MySQL. To work around it, change your
MySQL password to a value that is eight or fewer characters long, or
put your password in an option file.


File: manual.info,  Node: blocked-host,  Next: too-many-connections,  Prev: password-too-long,  Up: common-errors

C.5.2.7 `Host 'HOST_NAME' is blocked'
.....................................

If the following error occurs, it means that *Note `mysqld': mysqld.
has received many connection requests from the given host that were
interrupted in the middle:

     Host 'HOST_NAME' is blocked because of many connection errors.
     Unblock with 'mysqladmin flush-hosts'

The value of the `max_connect_errors' system variable determines how
many successive interrupted connection requests are permitted. (See
*Note server-system-variables::.) After `max_connect_errors' failed
requests without a successful connection, *Note `mysqld': mysqld.
assumes that something is wrong (for example, that someone is trying to
break in), and blocks the host from further connections until you issue
a *Note `FLUSH HOSTS': flush.  statement or execute a *Note `mysqladmin
flush-hosts': mysqladmin. command.

By default, *Note `mysqld': mysqld. blocks a host after 10 connection
errors. You can adjust the value by setting `max_connect_errors' at
server startup:

     shell> mysqld_safe --max_connect_errors=10000 &

The value can also be set at runtime:

     mysql> SET GLOBAL max_connect_errors=10000;

If you get the `Host 'HOST_NAME' is blocked' error message for a given
host, you should first verify that there is nothing wrong with TCP/IP
connections from that host.  If you are having network problems, it
does you no good to increase the value of the `max_connect_errors'
variable.


File: manual.info,  Node: too-many-connections,  Next: out-of-memory,  Prev: blocked-host,  Up: common-errors

C.5.2.8 `Too many connections'
..............................

If you get a `Too many connections' error when you try to connect to
the *Note `mysqld': mysqld.  server, this means that all available
connections are in use by other clients.

The number of connections permitted is controlled by the
`max_connections' system variable. The default value is 151 to improve
performance when MySQL is used with the Apache Web server. (Previously,
the default was 100.) If you need to support more connections, you
should set a larger value for this variable.

*Note `mysqld': mysqld. actually permits `max_connections+1' clients to
connect. The extra connection is reserved for use by accounts that have
the `SUPER' privilege. By granting the `SUPER' privilege to
administrators and not to normal users (who should not need it), an
administrator can connect to the server and use *Note `SHOW
PROCESSLIST': show-processlist. to diagnose problems even if the
maximum number of unprivileged clients are connected. See *Note
show-processlist::.

The maximum number of connections MySQL can support depends on the
quality of the thread library on a given platform, the amount of RAM
available, how much RAM is used for each connection, the workload from
each connection, and the desired response time. Linux or Solaris should
be able to support at 500 to 1000 simultaneous connections routinely
and as many as 10,000 connections if you have many gigabytes of RAM
available and the workload from each is low or the response time target
undemanding. Windows is limited to (open tables x 2 + open connections)
< 2048 due to the Posix compatibility layer used on that platform.

Increasing `open-files-limit' may be necessary. Also see *Note
linux-installation::, for how to raise the operating system limit on
how many handles can be used by MySQL.


File: manual.info,  Node: out-of-memory,  Next: gone-away,  Prev: too-many-connections,  Up: common-errors

C.5.2.9 `Out of memory'
.......................

If you issue a query using the *Note `mysql': mysql. client program and
receive an error like the following one, it means that *Note `mysql':
mysql. does not have enough memory to store the entire query result:

     mysql: Out of memory at line 42, 'malloc.c'
     mysql: needed 8136 byte (8k), memory in use: 12481367 bytes (12189k)
     ERROR 2008: MySQL client ran out of memory

To remedy the problem, first check whether your query is correct. Is it
reasonable that it should return so many rows?  If not, correct the
query and try again. Otherwise, you can invoke *Note `mysql': mysql.
with the `--quick' option. This causes it to use the *Note
`mysql_use_result()': mysql-use-result.  C API function to retrieve the
result set, which places less of a load on the client (but more on the
server).


File: manual.info,  Node: gone-away,  Next: packet-too-large,  Prev: out-of-memory,  Up: common-errors

C.5.2.10 `MySQL server has gone away'
.....................................

This section also covers the related `Lost connection to server during
query' error.

The most common reason for the `MySQL server has gone away' error is
that the server timed out and closed the connection. In this case, you
normally get one of the following error codes (which one you get is
operating system-dependent).

This table lists `MySQL server has gone away' error codes and provides
a description of each.

Error Code                Description
`CR_SERVER_GONE_ERROR'    The client couldn't send a question to the
                          server.
`CR_SERVER_LOST'          The client didn't get an error when writing to
                          the server, but it didn't get a full answer
                          (or any answer) to the question.

By default, the server closes the connection after eight hours if
nothing has happened. You can change the time limit by setting the
`wait_timeout' variable when you start *Note `mysqld': mysqld. See
*Note server-system-variables::.

If you have a script, you just have to issue the query again for the
client to do an automatic reconnection. This assumes that you have
automatic reconnection in the client enabled (which is the default for
the `mysql' command-line client).

Some other common reasons for the `MySQL server has gone away' error
are:

   * You (or the db administrator) has killed the running thread with a
     *Note `KILL': kill.  statement or a *Note `mysqladmin kill':
     mysqladmin. command.

   * You tried to run a query after closing the connection to the
     server. This indicates a logic error in the application that
     should be corrected.

   * A client application running on a different host does not have the
     necessary privileges to connect to the MySQL server from that host.

   * You got a timeout from the TCP/IP connection on the client side.
     This may happen if you have been using the commands: *Note
     `mysql_options(..., MYSQL_OPT_READ_TIMEOUT,...)': mysql-options. or
     *Note `mysql_options(..., MYSQL_OPT_WRITE_TIMEOUT,...)':
     mysql-options. In this case increasing the timeout may help solve
     the problem.

   * You have encountered a timeout on the server side and the
     automatic reconnection in the client is disabled (the `reconnect'
     flag in the `MYSQL' structure is equal to 0).

   * You are using a Windows client and the server had dropped the
     connection (probably because `wait_timeout' expired) before the
     command was issued.

     The problem on Windows is that in some cases MySQL does not get an
     error from the OS when writing to the TCP/IP connection to the
     server, but instead gets the error when trying to read the answer
     from the connection.

     The solution to this is to either do a *Note `mysql_ping()':
     mysql-ping. on the connection if there has been a long time since
     the last query (this is what Connector/ODBC does) or set
     `wait_timeout' on the *Note `mysqld': mysqld. server so high that
     it in practice never times out.

   * You can also get these errors if you send a query to the server
     that is incorrect or too large. If *Note `mysqld': mysqld.
     receives a packet that is too large or out of order, it assumes
     that something has gone wrong with the client and closes the
     connection. If you need big queries (for example, if you are
     working with big *Note `BLOB': blob. columns), you can increase
     the query limit by setting the server's `max_allowed_packet'
     variable, which has a default value of 1MB. You may also need to
     increase the maximum packet size on the client end. More
     information on setting the packet size is given in *Note
     packet-too-large::.

     An *Note `INSERT': insert. or *Note `REPLACE': replace. statement
     that inserts a great many rows can also cause these sorts of
     errors. Either one of these statements sends a single request to
     the server irrespective of the number of rows to be inserted;
     thus, you can often avoid the error by reducing the number of rows
     sent per *Note `INSERT': insert. or *Note `REPLACE': replace.

   * You also get a lost connection if you are sending a packet 16MB or
     larger if your client is older than 4.0.8 and your server is 4.0.8
     and above, or the other way around.

   * It is also possible to see this error if host name lookups fail
     (for example, if the DNS server on which your server or network
     relies goes down). This is because MySQL is dependent on the host
     system for name resolution, but has no way of knowing whether it
     is working--from MySQL's point of view the problem is
     indistinguishable from any other network timeout.

     You may also see the `MySQL server has gone away' error if MySQL
     is started with the `--skip-networking' option.

     Another networking issue that can cause this error occurs if the
     MySQL port (default 3306) is blocked by your firewall, thus
     preventing any connections at all to the MySQL server.

   * You can also encounter this error with applications that fork
     child processes, all of which try to use the same connection to
     the MySQL server. This can be avoided by using a separate
     connection for each child process.

   * You have encountered a bug where the server died while executing
     the query.

You can check whether the MySQL server died and restarted by executing
*Note `mysqladmin version': mysqladmin. and examining the server's
uptime. If the client connection was broken because *Note `mysqld':
mysqld. crashed and restarted, you should concentrate on finding the
reason for the crash. Start by checking whether issuing the query again
kills the server again. See *Note crashing::.

You can get more information about the lost connections by starting
*Note `mysqld': mysqld. with the `--log-warnings=2' option. This logs
some of the disconnected errors in the `hostname.err' file. See *Note
error-log::.

If you want to create a bug report regarding this problem, be sure that
you include the following information:

   * Indicate whether the MySQL server died. You can find information
     about this in the server error log. See *Note crashing::.

   * If a specific query kills *Note `mysqld': mysqld. and the tables
     involved were checked with *Note `CHECK TABLE': check-table.
     before you ran the query, can you provide a reproducible test
     case? See *Note porting::.

   * What is the value of the `wait_timeout' system variable in the
     MySQL server? (*Note `mysqladmin variables': mysqladmin. gives you
     the value of this variable.)

   * Have you tried to run *Note `mysqld': mysqld. with the general
     query log enabled to determine whether the problem query appears
     in the log? (See *Note query-log::.)

See also *Note communication-errors::, and *Note bug-reports::.


File: manual.info,  Node: packet-too-large,  Next: communication-errors,  Prev: gone-away,  Up: common-errors

C.5.2.11 Packet Too Large
.........................

A communication packet is a single SQL statement sent to the MySQL
server, a single row that is sent to the client, or a binary log event
sent from a master replication server to a slave.

The largest possible packet that can be transmitted to or from a MySQL
5.5 server or client is 1GB.

When a MySQL client or the *Note `mysqld': mysqld. server receives a
packet bigger than `max_allowed_packet' bytes, it issues an
`ER_NET_PACKET_TOO_LARGE' error and closes the connection. With some
clients, you may also get a `Lost connection to MySQL server during
query' error if the communication packet is too large.

Both the client and the server have their own `max_allowed_packet'
variable, so if you want to handle big packets, you must increase this
variable both in the client and in the server.

If you are using the *Note `mysql': mysql. client program, its default
`max_allowed_packet' variable is 16MB. To set a larger value, start
*Note `mysql': mysql.  like this:

     shell> mysql --max_allowed_packet=32M

That sets the packet size to 32MB.

The server's default `max_allowed_packet' value is 1MB. You can
increase this if the server needs to handle big queries (for example,
if you are working with big *Note `BLOB': blob. columns). For example,
to set the variable to 16MB, start the server like this:

     shell> mysqld --max_allowed_packet=16M

You can also use an option file to set `max_allowed_packet'. For
example, to set the size for the server to 16MB, add the following
lines in an option file:

     [mysqld]
     max_allowed_packet=16M

It is safe to increase the value of this variable because the extra
memory is allocated only when needed. For example, *Note `mysqld':
mysqld. allocates more memory only when you issue a long query or when
*Note `mysqld': mysqld. must return a large result row. The small
default value of the variable is a precaution to catch incorrect
packets between the client and server and also to ensure that you do
not run out of memory by using large packets accidentally.

You can also get strange problems with large packets if you are using
large *Note `BLOB': blob. values but have not given *Note `mysqld':
mysqld. access to enough memory to handle the query. If you suspect
this is the case, try adding `ulimit -d 256000' to the beginning of the
*Note `mysqld_safe': mysqld-safe. script and restarting *Note `mysqld':
mysqld.


File: manual.info,  Node: communication-errors,  Next: full-table,  Prev: packet-too-large,  Up: common-errors

C.5.2.12 Communication Errors and Aborted Connections
.....................................................

If connection problems occur such as communication errors or aborted
connections, use these sources of information to diagnose problems:

   * The error log. See *Note error-log::.

   * The general query log. See *Note query-log::.

   * The `Aborted_XXX' status variables. See *Note
     server-status-variables::.

If you start the server with the `--log-warnings' option, you might
find messages like this in your error log:

     010301 14:38:23  Aborted connection 854 to db:
     'users' user: 'josh'

If a client successfully connects but later disconnects improperly or
is terminated, the server increments the `Aborted_clients' status
variable, and logs an `Aborted connection' message to the error log.
The cause can be any of the following:

   * The client program did not call *Note `mysql_close()':
     mysql-close. before exiting.

   * The client had been sleeping more than `wait_timeout' or
     `interactive_timeout' seconds without issuing any requests to the
     server. See *Note server-system-variables::.

   * The client program ended abruptly in the middle of a data transfer.

If a client is unable even to connect, the server increments the
`Aborted_connects' status variable. Unsuccessful connection attempts
can occur for the following reasons:

   * A client does not have privileges to connect to a database.

   * A client uses an incorrect password.

   * A connection packet does not contain the right information.

   * It takes more than `connect_timeout' seconds to get a connect
     packet. See *Note server-system-variables::.

If these kinds of things happen, it might indicate that someone is
trying to break into your server! Messages for these types of problems
are logged to the general query log if it is enabled.

Other reasons for problems with aborted clients or aborted connections:

   * The `max_allowed_packet' variable value is too small or queries
     require more memory than you have allocated for *Note `mysqld':
     mysqld. See *Note packet-too-large::.

   * Use of Ethernet protocol with Linux, both half and full duplex.
     Many Linux Ethernet drivers have this bug. You should test for
     this bug by transferring a huge file using FTP between the client
     and server machines. If a transfer goes in burst-pause-burst-pause
     mode, you are experiencing a Linux duplex syndrome. Switch the
     duplex mode for both your network card and hub/switch to either
     full duplex or to half duplex and test the results to determine
     the best setting.

   * A problem with the thread library that causes interrupts on reads.

   * Badly configured TCP/IP.

   * Faulty Ethernets, hubs, switches, cables, and so forth.  This can
     be diagnosed properly only by replacing hardware.

See also *Note gone-away::.


File: manual.info,  Node: full-table,  Next: cannot-create,  Prev: communication-errors,  Up: common-errors

C.5.2.13 `The table is full'
............................

If a table-full error occurs, it may be that the disk is full or that
the table has reached its maximum size. The effective maximum table
size for MySQL databases is usually determined by operating system
constraints on file sizes, not by MySQL internal limits. See *Note
table-size-limit::.

This error can occur sometimes for MySQL Cluster tables even when there
appears to be more than sufficient data memory available. See the
documentation for the `DataMemory' MySQL Cluster data node
configuration parameter, as well as *Note mysql-cluster-nodes-groups::,
for more information.


File: manual.info,  Node: cannot-create,  Next: commands-out-of-sync,  Prev: full-table,  Up: common-errors

C.5.2.14 `Can't create/write to file'
.....................................

If you get an error of the following type for some queries, it means
that MySQL cannot create a temporary file for the result set in the
temporary directory:

     Can't create/write to file '\\sqla3fe_0.ism'.

The preceding error is a typical message for Windows; the Unix message
is similar.

One fix is to start *Note `mysqld': mysqld. with the `--tmpdir' option
or to add the option to the `[mysqld]' section of your option file. For
example, to specify a directory of `C:\temp', use these lines:

     [mysqld]
     tmpdir=C:/temp

The `C:\temp' directory must exist and have sufficient space for the
MySQL server to write to. See *Note option-files::.

Another cause of this error can be permissions issues. Make sure that
the MySQL server can write to the `tmpdir' directory.

Check also the error code that you get with *Note `perror': perror. One
reason the server cannot write to a table is that the file system is
full:

     shell> perror 28
     OS error code  28:  No space left on device

If you get an error of the following type during startup, it indicates
that the file system or directory used for storing data files is write
protected. Provided that the write error is to a test file, the error
is not serious and can be safely ignored.

     Can't create test file /usr/local/mysql/data/master.lower-test


File: manual.info,  Node: commands-out-of-sync,  Next: ignoring-user,  Prev: cannot-create,  Up: common-errors

C.5.2.15 `Commands out of sync'
...............................

If you get `Commands out of sync; you can't run this command now' in
your client code, you are calling client functions in the wrong order.

This can happen, for example, if you are using *Note
`mysql_use_result()': mysql-use-result. and try to execute a new query
before you have called *Note `mysql_free_result()': mysql-free-result.
It can also happen if you try to execute two queries that return data
without calling *Note `mysql_use_result()': mysql-use-result. or *Note
`mysql_store_result()': mysql-store-result. in between.


File: manual.info,  Node: ignoring-user,  Next: cannot-find-table,  Prev: commands-out-of-sync,  Up: common-errors

C.5.2.16 `Ignoring user'
........................

If you get the following error, it means that when *Note `mysqld':
mysqld. was started or when it reloaded the grant tables, it found an
account in the `user' table that had an invalid password.

`Found wrong password for user 'SOME_USER'@'SOME_HOST'; ignoring user'

As a result, the account is simply ignored by the permission system.

The following list indicates possible causes of and fixes for this
problem:

   * You may be running a new version of *Note `mysqld': mysqld. with
     an old `user' table. You can check this by executing *Note
     `mysqlshow mysql user': mysqlshow. to see whether the `Password'
     column is shorter than 16 characters. If so, you can correct this
     condition by running the `scripts/add_long_password' script.

   * The account has an old password (eight characters long).  Update
     the account in the `user' table to have a new password.

   * You have specified a password in the `user' table without using the
     `PASSWORD()' function. Use *Note `mysql': mysql. to update the
     account in the `user' table with a new password, making sure to
     use the `PASSWORD()' function:

          mysql> UPDATE user SET Password=PASSWORD('NEWPWD')
              -> WHERE User='SOME_USER' AND Host='SOME_HOST';


File: manual.info,  Node: cannot-find-table,  Next: cannot-initialize-character-set,  Prev: ignoring-user,  Up: common-errors

C.5.2.17 `Table 'TBL_NAME' doesn't exist'
.........................................

If you get either of the following errors, it usually means that no
table exists in the default database with the given name:

     Table 'TBL_NAME' doesn't exist
     Can't find file: 'TBL_NAME' (errno: 2)

In some cases, it may be that the table does exist but that you are
referring to it incorrectly:

   * Because MySQL uses directories and files to store databases and
     tables, database and table names are case sensitive if they are
     located on a file system that has case-sensitive file names.

   * Even for file systems that are not case sensitive, such as on
     Windows, all references to a given table within a query must use
     the same lettercase.

You can check which tables are in the default database with *Note `SHOW
TABLES': show-tables. See *Note show::.


File: manual.info,  Node: cannot-initialize-character-set,  Next: not-enough-file-handles,  Prev: cannot-find-table,  Up: common-errors

C.5.2.18 `Can't initialize character set'
.........................................

You might see an error like this if you have character set problems:

     MySQL Connection Failed: Can't initialize character set CHARSET_NAME

This error can have any of the following causes:

   * The character set is a multi-byte character set and you have no
     support for the character set in the client. In this case, you
     need to recompile the client by running `CMake' with the
     `-DDEFAULT_CHARSET=CHARSET_NAME' or
     `-DWITH_EXTRA_CHARSETS=CHARSET_NAME' option. See *Note
     source-configuration-options::.

     All standard MySQL binaries are compiled with
     `-DWITH_EXTRA_CHARSETS=all', which enables support for all
     multi-byte character sets.  See *Note
     source-configuration-options::.

   * The character set is a simple character set that is not compiled
     into *Note `mysqld': mysqld, and the character set definition
     files are not in the place where the client expects to find them.

     In this case, you need to use one of the following methods to
     solve the problem:

        * Recompile the client with support for the character set. See
          *Note source-configuration-options::.

        * Specify to the client the directory where the character set
          definition files are located. For many clients, you can do
          this with the `--character-sets-dir' option.

        * Copy the character definition files to the path where the
          client expects them to be.


File: manual.info,  Node: not-enough-file-handles,  Next: table-corruption,  Prev: cannot-initialize-character-set,  Up: common-errors

C.5.2.19 `'FILE' Not Found' and Similar Errors
..............................................

If you get `ERROR '...' not found (errno: 23)', `Can't open file: ...
(errno: 24)', or any other error with `errno 23' or `errno 24' from
MySQL, it means that you haven't allocated enough file descriptors for
the MySQL server. You can use the *Note `perror': perror.  utility to
get a description of what the error number means:

     shell> perror 23
     OS error code  23:  File table overflow
     shell> perror 24
     OS error code  24:  Too many open files
     shell> perror 11
     OS error code  11:  Resource temporarily unavailable

The problem here is that *Note `mysqld': mysqld. is trying to keep open
too many files simultaneously. You can either tell *Note `mysqld':
mysqld. not to open so many files at once or increase the number of
file descriptors available to *Note `mysqld': mysqld.

To tell *Note `mysqld': mysqld. to keep open fewer files at a time, you
can make the table cache smaller by reducing the value of the
`table_open_cache' system variable (the default value is 64). This may
not entirely prevent running out of file descriptors because in some
circumstances the server may attempt to extend the cache size
temporarily, as described in *Note table-cache::. Reducing the value of
`max_connections' also reduces the number of open files (the default
value is 100).

To change the number of file descriptors available to *Note `mysqld':
mysqld, you can use the `--open-files-limit' option to *Note
`mysqld_safe': mysqld-safe. or set the `open_files_limit' system
variable. See *Note server-system-variables::. The easiest way to set
these values is to add an option to your option file. See *Note
option-files::. If you have an old version of *Note `mysqld': mysqld.
that does not support setting the open files limit, you can edit the
*Note `mysqld_safe': mysqld-safe. script. There is a commented-out line
`ulimit -n 256' in the script. You can remove the ``#'' character to
uncomment this line, and change the number `256' to set the number of
file descriptors to be made available to *Note `mysqld': mysqld.

`--open-files-limit' and `ulimit' can increase the number of file
descriptors, but only up to the limit imposed by the operating system.
There is also a `hard' limit that can be overridden only if you start
*Note `mysqld_safe': mysqld-safe. or *Note `mysqld': mysqld. as `root'
(just remember that you also need to start the server with the `--user'
option in this case so that it does not continue to run as `root' after
it starts up). If you need to increase the operating system limit on
the number of file descriptors available to each process, consult the
documentation for your system.

*Note*:

If you run the `tcsh' shell, `ulimit' does not work!  `tcsh' also
reports incorrect values when you ask for the current limits. In this
case, you should start *Note `mysqld_safe': mysqld-safe. using `sh'.


File: manual.info,  Node: table-corruption,  Prev: not-enough-file-handles,  Up: common-errors

C.5.2.20 Table-Corruption Issues
................................

If you have started *Note `mysqld': mysqld. with
`--myisam-recover-options', MySQL automatically checks and tries to
repair `MyISAM' tables if they are marked as 'not closed properly' or
'crashed'. If this happens, MySQL writes an entry in the `hostname.err'
file `'Warning: Checking table ...'' which is followed by `Warning:
Repairing table' if the table needs to be repaired. If you get a lot of
these errors, without *Note `mysqld': mysqld. having died unexpectedly
just before, then something is wrong and needs to be investigated
further.

As of MySQL 5.5.3, when the server detects `MyISAM' table corruption,
it writes additional information to the error log, such as the name and
line number of the source file, and the list of threads accessing the
table. Example: `Got an error from thread_id=1, mi_dynrec.c:368'. This
is useful information to include in bug reports.

See also *Note server-options::, and *Note reproducible-test-case::.


File: manual.info,  Node: installation-issues,  Next: administration-issues,  Prev: common-errors,  Up: problems

C.5.3 Installation-Related Issues
---------------------------------

* Menu:

* file-permissions::             Problems with File Permissions


File: manual.info,  Node: file-permissions,  Prev: installation-issues,  Up: installation-issues

C.5.3.1 Problems with File Permissions
......................................

If you have problems with file permissions, the `UMASK' environment
variable might be set incorrectly when *Note `mysqld': mysqld. starts.
For example, MySQL might issue the following error message when you
create a table:

     ERROR: Can't find file: 'path/with/filename.frm' (Errcode: 13)

The default `UMASK' value is `0660'. You can change this behavior by
starting *Note `mysqld_safe': mysqld-safe. as follows:

     shell> UMASK=384  # = 600 in octal
     shell> export UMASK
     shell> mysqld_safe &

By default, MySQL creates database directories with an access
permission value of `0700'. You can modify this behavior by setting the
`UMASK_DIR' variable. If you set its value, new directories are created
with the combined `UMASK' and `UMASK_DIR' values. For example, if you
want to give group access to all new directories, you can do this:

     shell> UMASK_DIR=504  # = 770 in octal
     shell> export UMASK_DIR
     shell> mysqld_safe &

MySQL assumes that the value for `UMASK' or `UMASK_DIR' is in octal if
it starts with a zero.

See *Note environment-variables::.


File: manual.info,  Node: administration-issues,  Next: query-issues,  Prev: installation-issues,  Up: problems

C.5.4 Administration-Related Issues
-----------------------------------

* Menu:

* resetting-permissions::        How to Reset the Root Password
* crashing::                     What to Do If MySQL Keeps Crashing
* full-disk::                    How MySQL Handles a Full Disk
* temporary-files::              Where MySQL Stores Temporary Files
* problems-with-mysql-sock::     How to Protect or Change the MySQL Unix Socket File
* timezone-problems::            Time Zone Problems


File: manual.info,  Node: resetting-permissions,  Next: crashing,  Prev: administration-issues,  Up: administration-issues

C.5.4.1 How to Reset the Root Password
......................................

* Menu:

* resetting-permissions-windows::  Resetting the Root Password: Windows Systems
* resetting-permissions-unix::   Resetting the Root Password: Unix Systems
* resetting-permissions-generic::  Resetting the Root Password: Generic Instructions

If you have never set a `root' password for MySQL, the server does not
require a password at all for connecting as `root'. However, this is
insecure. For instructions on assigning passwords, see *Note
default-privileges::.

If you know the `root' password, but want to change it, see *Note
set-password::.

If you set a `root' password previously, but have forgotten it, you can
set a new password. The following sections provide instructions for
Windows and Unix systems, as well as generic instructions that apply to
any system.


File: manual.info,  Node: resetting-permissions-windows,  Next: resetting-permissions-unix,  Prev: resetting-permissions,  Up: resetting-permissions

C.5.4.2 Resetting the Root Password: Windows Systems
....................................................

On Windows, use the following procedure to reset the password for all
MySQL `root' accounts:

  1. Log on to your system as Administrator.

  2. Stop the MySQL server if it is running. For a server that is
     running as a Windows service, go to the Services manager: From the
     `Start' menu, select `Control Panel', then `Administrative Tools',
     then `Services'. Find the MySQL service in the list and stop it.

     If your server is not running as a service, you may need to use
     the Task Manager to force it to stop.

  3. Create a text file containing the following statements.  Replace
     the password with the password that you want to use.

          UPDATE mysql.user SET Password=PASSWORD('MyNewPass') WHERE User='root';
          FLUSH PRIVILEGES;

     Write the *Note `UPDATE': update. and *Note `FLUSH': flush.
     statements each on a single line. The *Note `UPDATE': update.
     statement resets the password for all `root' accounts, and the
     *Note `FLUSH': flush. statement tells the server to reload the
     grant tables into memory so that it notices the password change.

  4. Save the file. For this example, the file will be named
     `C:\mysql-init.txt'.

  5. Open a console window to get to the command prompt: From the
     `Start' menu, select `Run', then enter `cmd' as the command to be
     run.

  6. Start the MySQL server with the special `--init-file' option
     (notice that the backslash in the option value is doubled):

          C:\> C:\mysql\bin\mysqld --init-file=C:\\mysql-init.txt

     If you installed MySQL to a location other than `C:\mysql', adjust
     the command accordingly.

     The server executes the contents of the file named by the
     `--init-file' option at startup, changing each `root' account
     password.

     You can also add the `--console' option to the command if you want
     server output to appear in the console window rather than in a log
     file.

     If you installed MySQL using the MySQL Installation Wizard, you
     may need to specify a `--defaults-file' option:

          C:\> "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld.exe"
                   --defaults-file="C:\\Program Files\\MySQL\\MySQL Server 5.5\\my.ini"
                   --init-file=C:\\mysql-init.txt

     The appropriate `--defaults-file' setting can be found using the
     Services Manager: From the `Start' menu, select `Control Panel',
     then `Administrative Tools', then `Services'. Find the MySQL
     service in the list, right-click it, and choose the `Properties'
     option. The `Path to executable' field contains the
     `--defaults-file' setting.

  7. After the server has started successfully, delete
     `C:\mysql-init.txt'.

You should now be able to connect to the MySQL server as `root' using
the new password. Stop the MySQL server, then restart it in normal mode
again. If you run the server as a service, start it from the Windows
Services window. If you start the server manually, use whatever command
you normally use.


File: manual.info,  Node: resetting-permissions-unix,  Next: resetting-permissions-generic,  Prev: resetting-permissions-windows,  Up: resetting-permissions

C.5.4.3 Resetting the Root Password: Unix Systems
.................................................

On Unix, use the following procedure to reset the password for all
MySQL `root' accounts. The instructions assume that you will start the
server so that it runs using the Unix login account that you normally
use for running the server. For example, if you run the server using
the `mysql' login account, you should log in as `mysql' before using the
instructions. Alternatively, you can log in as `root', but in this case
you _must_ start *Note `mysqld': mysqld.  with the `--user=mysql'
option.  If you start the server as `root' without using
`--user=mysql', the server may create `root'-owned files in the data
directory, such as log files, and these may cause permission-related
problems for future server startups. If that happens, you will need to
either change the ownership of the files to `mysql' or remove them.

  1. Log on to your system as the Unix user that the *Note `mysqld':
     mysqld. server runs as (for example, `mysql').

  2. Locate the `.pid' file that contains the server's process ID. The
     exact location and name of this file depend on your distribution,
     host name, and configuration. Common locations are
     `/var/lib/mysql/', `/var/run/mysqld/', and
     `/usr/local/mysql/data/'. Generally, the file name has an
     extension of `.pid' and begins with either `mysqld' or your
     system's host name.

     You can stop the MySQL server by sending a normal `kill' (not
     `kill -9') to the *Note `mysqld': mysqld. process, using the path
     name of the `.pid' file in the following command:

          shell> kill `cat /mysql-data-directory/host_name.pid`

     Use backticks (not forward quotation marks) with the `cat'
     command. These cause the output of `cat' to be substituted into the
     `kill' command.

  3. Create a text file containing the following statements.  Replace
     the password with the password that you want to use.

          UPDATE mysql.user SET Password=PASSWORD('MyNewPass') WHERE User='root';
          FLUSH PRIVILEGES;

     Write the *Note `UPDATE': update. and *Note `FLUSH': flush.
     statements each on a single line. The *Note `UPDATE': update.
     statement resets the password for all `root' accounts, and the
     *Note `FLUSH': flush. statement tells the server to reload the
     grant tables into memory so that it notices the password change.

  4. Save the file. For this example, the file will be named
     `/home/me/mysql-init'. The file contains the password, so it
     should not be saved where it can be read by other users. If you
     are not logged in as `mysql' (the user the server runs as), make
     sure that the file has permissions that permit `mysql' to read it.

  5. Start the MySQL server with the special `--init-file' option:

          shell> mysqld_safe --init-file=/home/me/mysql-init &

     The server executes the contents of the file named by the
     `--init-file' option at startup, changing each `root' account
     password.

  6. After the server has started successfully, delete
     `/home/me/mysql-init'.

You should now be able to connect to the MySQL server as `root' using
the new password. Stop the server and restart it normally.


File: manual.info,  Node: resetting-permissions-generic,  Prev: resetting-permissions-unix,  Up: resetting-permissions

C.5.4.4 Resetting the Root Password: Generic Instructions
.........................................................

The preceding sections provide password-resetting instructions for
Windows and Unix systems. Alternatively, on any platform, you can set
the new password using the *Note `mysql': mysql. client (but this
approach is less secure):

  1. Stop *Note `mysqld': mysqld. and restart it with the
     `--skip-grant-tables' option. This enables anyone to connect
     without a password and with all privileges. Because this is
     insecure, you might want to use `--skip-grant-tables' in
     conjunction with `--skip-networking' to prevent remote clients
     from connecting.

  2. Connect to the *Note `mysqld': mysqld. server with this command:

          shell> mysql

  3. Issue the following statements in the *Note `mysql': mysql.
     client. Replace the password with the password that you want to
     use.

          mysql> UPDATE mysql.user SET Password=PASSWORD('MyNewPass')
              ->                   WHERE User='root';
          mysql> FLUSH PRIVILEGES;

     The *Note `FLUSH': flush. statement tells the server to reload the
     grant tables into memory so that it notices the password change.

You should now be able to connect to the MySQL server as `root' using
the new password. Stop the server, then restart it normally (without the
`--skip-grant-tables' and `--skip-networking' options).


File: manual.info,  Node: crashing,  Next: full-disk,  Prev: resetting-permissions,  Up: administration-issues

C.5.4.5 What to Do If MySQL Keeps Crashing
..........................................

Each MySQL version is tested on many platforms before it is released.
This does not mean that there are no bugs in MySQL, but if there are
bugs, they should be very few and can be hard to find. If you have a
problem, it always helps if you try to find out exactly what crashes
your system, because you have a much better chance of getting the
problem fixed quickly.

First, you should try to find out whether the problem is that the *Note
`mysqld': mysqld. server dies or whether your problem has to do with
your client. You can check how long your *Note `mysqld': mysqld. server
has been up by executing *Note `mysqladmin version': mysqladmin. If
*Note `mysqld': mysqld. has died and restarted, you may find the reason
by looking in the server's error log. See *Note error-log::.

On some systems, you can find in the error log a stack trace of where
*Note `mysqld': mysqld. died that you can resolve with the
`resolve_stack_dump' program. See *Note porting::. Note that the
variable values written in the error log may not always be 100% correct.

Many server crashes are caused by corrupted data files or index files.
MySQL updates the files on disk with the `write()' system call after
every SQL statement and before the client is notified about the result.
(This is not true if you are running with `--delay-key-write', in which
case data files are written but not index files.) This means that data
file contents are safe even if *Note `mysqld': mysqld. crashes, because
the operating system ensures that the unflushed data is written to
disk. You can force MySQL to flush everything to disk after every SQL
statement by starting *Note `mysqld': mysqld. with the `--flush' option.

The preceding means that normally you should not get corrupted tables
unless one of the following happens:

   * The MySQL server or the server host was killed in the middle of an
     update.

   * You have found a bug in *Note `mysqld': mysqld. that caused it to
     die in the middle of an update.

   * Some external program is manipulating data files or index files at
     the same time as *Note `mysqld': mysqld.  without locking the
     table properly.

   * You are running many *Note `mysqld': mysqld. servers using the
     same data directory on a system that does not support good file
     system locks (normally handled by the `lockd' lock manager), or
     you are running multiple servers with external locking disabled.

   * You have a crashed data file or index file that contains very
     corrupt data that confused *Note `mysqld': mysqld.

   * You have found a bug in the data storage code. This isn't likely,
     but it is at least possible. In this case, you can try to change
     the storage engine to another engine by using *Note `ALTER TABLE':
     alter-table. on a repaired copy of the table.

Because it is very difficult to know why something is crashing, first
try to check whether things that work for others crash for you. Please
try the following things:

   * Stop the *Note `mysqld': mysqld. server with *Note `mysqladmin
     shutdown': mysqladmin, run *Note `myisamchk --silent --force
     */*.MYI': myisamchk. from the data directory to check all `MyISAM'
     tables, and restart *Note `mysqld': mysqld. This ensures that you
     are running from a clean state. See *Note server-administration::.

   * Start *Note `mysqld': mysqld. with the general query log enabled
     (see *Note query-log::). Then try to determine from the
     information written to the log whether some specific query kills
     the server. About 95% of all bugs are related to a particular
     query. Normally, this is one of the last queries in the log file
     just before the server restarts. See *Note query-log::. If you can
     repeatedly kill MySQL with a specific query, even when you have
     checked all tables just before issuing it, then you have been able
     to locate the bug and should submit a bug report for it. See *Note
     bug-reports::.

   * Try to make a test case that we can use to repeat the problem. See
     *Note porting::.

   * Try running the tests in the `mysql-test' directory and the MySQL
     benchmarks. See *Note mysql-test-suite::. They should test MySQL
     rather well. You can also add code to the benchmarks that
     simulates your application. The benchmarks can be found in the
     `sql-bench' directory in a source distribution or, for a binary
     distribution, in the `sql-bench' directory under your MySQL
     installation directory.

   * Try the `fork_big.pl' script. (It is located in the `tests'
     directory of source distributions.)

   * If you configure MySQL for debugging, it is much easier to gather
     information about possible errors if something goes wrong.
     Reconfigure MySQL with the `-DWITH_DEBUG=1' option to `CMake' and
     then recompile. See *Note porting::.

   * Make sure that you have applied the latest patches for your
     operating system.

   * Use the `--skip-external-locking' option to *Note `mysqld':
     mysqld. On some systems, the `lockd' lock manager does not work
     properly; the `--skip-external-locking' option tells *Note
     `mysqld': mysqld. not to use external locking. (This means that
     you cannot run two *Note `mysqld': mysqld. servers on the same data
     directory and that you must be careful if you use *Note
     `myisamchk': myisamchk. Nevertheless, it may be instructive to try
     the option as a test.)

   * Have you tried *Note `mysqladmin -u root processlist': mysqladmin.
     when *Note `mysqld': mysqld.  appears to be running but not
     responding? Sometimes *Note `mysqld': mysqld. is not comatose even
     though you might think so. The problem may be that all connections
     are in use, or there may be some internal lock problem.  *Note
     `mysqladmin -u root processlist': mysqladmin. usually is able to
     make a connection even in these cases, and can provide useful
     information about the current number of connections and their
     status.

   * Run the command *Note `mysqladmin -i 5 status': mysqladmin.  or
     *Note `mysqladmin -i 5 -r status': mysqladmin. in a separate
     window to produce statistics while you run your other queries.

   * Try the following:

       1. Start *Note `mysqld': mysqld. from `gdb' (or another
          debugger). See *Note porting::.

       2. Run your test scripts.

       3. Print the backtrace and the local variables at the three
          lowest levels. In `gdb', you can do this with the following
          commands when *Note `mysqld': mysqld. has crashed inside
          `gdb':

               backtrace
               info local
               up
               info local
               up
               info local

          With `gdb', you can also examine which threads exist with
          `info threads' and switch to a specific thread with `thread
          N', where N is the thread ID.

   * Try to simulate your application with a Perl script to force MySQL
     to crash or misbehave.

   * Send a normal bug report. See *Note bug-reports::. Be even more
     detailed than usual. Because MySQL works for many people, it may
     be that the crash results from something that exists only on your
     computer (for example, an error that is related to your particular
     system libraries).

   * If you have a problem with tables containing dynamic-length rows
     and you are using only *Note `VARCHAR': char. columns (not *Note
     `BLOB': blob. or *Note `TEXT': blob. columns), you can try to
     change all *Note `VARCHAR': char. to *Note `CHAR': char. with
     *Note `ALTER TABLE': alter-table. This forces MySQL to use
     fixed-size rows. Fixed-size rows take a little extra space, but
     are much more tolerant to corruption.

     The current dynamic row code has been in use for several years
     with very few problems, but dynamic-length rows are by nature more
     prone to errors, so it may be a good idea to try this strategy to
     see whether it helps.

   * Do not rule out your server hardware when diagnosing problems.
     Defective hardware can be the cause of data corruption. Particular
     attention should be paid to your memory and disk subsystems when
     troubleshooting hardware.


File: manual.info,  Node: full-disk,  Next: temporary-files,  Prev: crashing,  Up: administration-issues

C.5.4.6 How MySQL Handles a Full Disk
.....................................

This section describes how MySQL responds to disk-full errors (such as
`no space left on device'), and to quota-exceeded errors (such as
`write failed' or `user block limit reached').

This section is relevant for writes to `MyISAM' tables. It also applies
for writes to binary log files and binary log index file, except that
references to `row' and `record' should be understood to mean `event.'

When a disk-full condition occurs, MySQL does the following:

   * It checks once every minute to see whether there is enough space
     to write the current row. If there is enough space, it continues
     as if nothing had happened.

   * Every 10 minutes it writes an entry to the log file, warning about
     the disk-full condition.

To alleviate the problem, you can take the following actions:

   * To continue, you only have to free enough disk space to insert all
     records.

   * To abort the thread, you must use *Note `mysqladmin kill':
     mysqladmin. The thread is aborted the next time it checks the disk
     (in one minute).

   * Other threads might be waiting for the table that caused the
     disk-full condition. If you have several `locked' threads, killing
     the one thread that is waiting on the disk-full condition enables
     the other threads to continue.

Exceptions to the preceding behavior are when you use *Note `REPAIR
TABLE': repair-table. or *Note `OPTIMIZE TABLE': optimize-table. or
when the indexes are created in a batch after *Note `LOAD DATA INFILE':
load-data. or after an *Note `ALTER TABLE': alter-table. statement. All
of these statements may create large temporary files that, if left to
themselves, would cause big problems for the rest of the system. If the
disk becomes full while MySQL is doing any of these operations, it
removes the big temporary files and mark the table as crashed. The
exception is that for *Note `ALTER TABLE': alter-table, the old table
is left unchanged.


File: manual.info,  Node: temporary-files,  Next: problems-with-mysql-sock,  Prev: full-disk,  Up: administration-issues

C.5.4.7 Where MySQL Stores Temporary Files
..........................................

On Unix, MySQL uses the value of the `TMPDIR' environment variable as
the path name of the directory in which to store temporary files. If
`TMPDIR' is not set, MySQL uses the system default, which is usually
`/tmp', `/var/tmp', or `/usr/tmp'.

On Windows, MySQL checks in order the values of the `TMPDIR', `TEMP',
and `TMP' environment variables. For the first one found to be set,
MySQL uses it and does not check those remaining. If none of `TMPDIR',
`TEMP', or `TMP' are set, MySQL uses the Windows system default, which
is usually `C:\windows\temp\'.

If the file system containing your temporary file directory is too
small, you can use the `--tmpdir' option to *Note `mysqld': mysqld. to
specify a directory in a file system where you have enough space.

In MySQL 5.5, the `--tmpdir' option can be set to a list of several
paths that are used in round-robin fashion.  Paths should be separated
by colon characters (``:'') on Unix and semicolon characters (``;'') on
Windows.

*Note*:

To spread the load effectively, these paths should be located on
different _physical_ disks, not different partitions of the same disk.

If the MySQL server is acting as a replication slave, you should not
set `--tmpdir' to point to a directory on a memory-based file system or
to a directory that is cleared when the server host restarts. A
replication slave needs some of its temporary files to survive a
machine restart so that it can replicate temporary tables or *Note
`LOAD DATA INFILE': load-data. operations. If files in the temporary
file directory are lost when the server restarts, replication fails.

MySQL arranges that temporary files are removed if *Note `mysqld':
mysqld. is terminated. On platforms that support it (such as Unix),
this is done by unlinking the file after opening it. The disadvantage
of this is that the name does not appear in directory listings and you
do not see a big temporary file that fills up the file system in which
the temporary file directory is located. (In such cases, `lsof +L1' may
be helpful in identifying large files associated with *Note `mysqld':
mysqld.)

When sorting (`ORDER BY' or `GROUP BY'), MySQL normally uses one or two
temporary files.  The maximum disk space required is determined by the
following expression:

     (length of what is sorted + sizeof(row pointer))
     * number of matched rows
     * 2

The row pointer size is usually four bytes, but may grow in the future
for really big tables.

For some *Note `SELECT': select. queries, MySQL also creates temporary
SQL tables. These are not hidden and have names of the form `SQL_*'.

*Note `ALTER TABLE': alter-table. creates a temporary table in the same
directory as the original table.


File: manual.info,  Node: problems-with-mysql-sock,  Next: timezone-problems,  Prev: temporary-files,  Up: administration-issues

C.5.4.8 How to Protect or Change the MySQL Unix Socket File
...........................................................

The default location for the Unix socket file that the server uses for
communication with local clients is `/tmp/mysql.sock'. (For some
distribution formats, the directory might be different, such as
`/var/lib/mysql' for RPMs.)

On some versions of Unix, anyone can delete files in the `/tmp'
directory or other similar directories used for temporary files. If the
socket file is located in such a directory on your system, this might
cause problems.

On most versions of Unix, you can protect your `/tmp' directory so that
files can be deleted only by their owners or the superuser (`root'). To
do this, set the `sticky' bit on the `/tmp' directory by logging in as
`root' and using the following command:

     shell> chmod +t /tmp

You can check whether the `sticky' bit is set by executing `ls -ld
/tmp'. If the last permission character is `t', the bit is set.

Another approach is to change the place where the server creates the
Unix socket file. If you do this, you should also let client programs
know the new location of the file. You can specify the file location in
several ways:

   * Specify the path in a global or local option file. For example,
     put the following lines in `/etc/my.cnf':

          [mysqld]
          socket=/path/to/socket

          [client]
          socket=/path/to/socket

     See *Note option-files::.

   * Specify a `--socket' option on the command line to *Note
     `mysqld_safe': mysqld-safe. and when you run client programs.

   * Set the `MYSQL_UNIX_PORT' environment variable to the path of the
     Unix socket file.

   * Recompile MySQL from source to use a different default Unix socket
     file location. Define the path to the file with the
     `MYSQL_UNIX_ADDR' option when you run `CMake'. See *Note
     source-configuration-options::.

You can test whether the new socket location works by attempting to
connect to the server with this command:

     shell> mysqladmin --socket=/path/to/socket version


File: manual.info,  Node: timezone-problems,  Prev: problems-with-mysql-sock,  Up: administration-issues

C.5.4.9 Time Zone Problems
..........................

If you have a problem with `SELECT NOW()' returning values in UTC and
not your local time, you have to tell the server your current time
zone. The same applies if `UNIX_TIMESTAMP()' returns the wrong value.
This should be done for the environment in which the server runs; for
example, in *Note `mysqld_safe': mysqld-safe. or *Note `mysql.server':
mysql-server. See *Note environment-variables::.

You can set the time zone for the server with the
`--timezone=TIMEZONE_NAME' option to *Note `mysqld_safe': mysqld-safe.
You can also set it by setting the `TZ' environment variable before you
start *Note `mysqld': mysqld.

The permissible values for `--timezone' or `TZ' are system dependent.
Consult your operating system documentation to see what values are
acceptable.


File: manual.info,  Node: query-issues,  Next: optimizer-issues,  Prev: administration-issues,  Up: problems

C.5.5 Query-Related Issues
--------------------------

* Menu:

* case-sensitivity::             Case Sensitivity in String Searches
* using-date::                   Problems Using `DATE' Columns
* problems-with-null::           Problems with `NULL' Values
* problems-with-alias::          Problems with Column Aliases
* nontransactional-tables::      Rollback Failure for Nontransactional Tables
* deleting-from-related-tables::  Deleting Rows from Related Tables
* no-matching-rows::             Solving Problems with No Matching Rows
* problems-with-float::          Problems with Floating-Point Values


File: manual.info,  Node: case-sensitivity,  Next: using-date,  Prev: query-issues,  Up: query-issues

C.5.5.1 Case Sensitivity in String Searches
...........................................

For nonbinary strings (*Note `CHAR': char, *Note `VARCHAR': char, *Note
`TEXT': blob.), string searches use the collation of the comparison
operands. For binary strings (*Note `BINARY': binary-varbinary, *Note
`VARBINARY': binary-varbinary, *Note `BLOB': blob.), comparisons use the
numeric values of the bytes in the operands; this means that for
alphabetic characters, comparisons will be case sensitive.

A comparison between a nonbinary string and binary string is treated as
a comparison of binary strings.

Simple comparison operations (`>=, >, =, <, <=', sorting, and grouping)
are based on each character's `sort value.' Characters with the same
sort value are treated as the same character. For example, if ``e'' and
``e''' have the same sort value in a given collation, they compare as
equal.

The default character set and collation are `latin1' and
`latin1_swedish_ci', so nonbinary string comparisons are case
insensitive by default. This means that if you search with `COL_NAME
LIKE 'a%'', you get all column values that start with `A' or `a'. To
make this search case sensitive, make sure that one of the operands has
a case sensitive or binary collation. For example, if you are comparing
a column and a string that both have the `latin1' character set, you
can use the `COLLATE' operator to cause either operand to have the
`latin1_general_cs' or `latin1_bin' collation:

     COL_NAME COLLATE latin1_general_cs LIKE 'a%'
     COL_NAME LIKE 'a%' COLLATE latin1_general_cs
     COL_NAME COLLATE latin1_bin LIKE 'a%'
     COL_NAME LIKE 'a%' COLLATE latin1_bin

If you want a column always to be treated in case-sensitive fashion,
declare it with a case sensitive or binary collation.  See *Note
create-table::.

To cause a case-sensitive comparison of nonbinary strings to be case
insensitive, use `COLLATE' to name a case-insensitive collation. The
strings in the following example normally are case sensitive, but
`COLLATE' changes the comparison to be case insensitive:

     mysql> SET @s1 = 'MySQL' COLLATE latin1_bin,
         ->     @s2 = 'mysql' COLLATE latin1_bin;
     mysql> SELECT @s1 = @s2;
     +-----------+
     | @s1 = @s2 |
     +-----------+
     |         0 |
     +-----------+
     mysql> SELECT @s1 COLLATE latin1_swedish_ci = @s2;
     +-------------------------------------+
     | @s1 COLLATE latin1_swedish_ci = @s2 |
     +-------------------------------------+
     |                                   1 |
     +-------------------------------------+

A binary string is case sensitive in comparisons. To compare the string
as case insensitive, convert it to a nonbinary string and use `COLLATE'
to name a case-insensitive collation:

     mysql> SET @s = BINARY 'MySQL';
     mysql> SELECT @s = 'mysql';
     +--------------+
     | @s = 'mysql' |
     +--------------+
     |            0 |
     +--------------+
     mysql> SELECT CONVERT(@s USING latin1) COLLATE latin1_swedish_ci = 'mysql';
     +--------------------------------------------------------------+
     | CONVERT(@s USING latin1) COLLATE latin1_swedish_ci = 'mysql' |
     +--------------------------------------------------------------+
     |                                                            1 |
     +--------------------------------------------------------------+

To determine whether a value will compare as a nonbinary or binary
string, use the `COLLATION()' function. This example shows that
`VERSION()' returns a string that has a case-insensitive collation, so
comparisons are case insensitive:

     mysql> SELECT COLLATION(VERSION());
     +----------------------+
     | COLLATION(VERSION()) |
     +----------------------+
     | utf8_general_ci      |
     +----------------------+

For binary strings, the collation value is `binary', so comparisons
will be case sensitive. One context in which you will see `binary' is
for compression and encryption functions, which return binary strings
as a general rule: string:

     mysql> SELECT COLLATION(ENCRYPT('x')), COLLATION(SHA1('x'));
     +-------------------------+----------------------+
     | COLLATION(ENCRYPT('x')) | COLLATION(SHA1('x')) |
     +-------------------------+----------------------+
     | binary                  | binary               |
     +-------------------------+----------------------+


File: manual.info,  Node: using-date,  Next: problems-with-null,  Prev: case-sensitivity,  Up: query-issues

C.5.5.2 Problems Using `DATE' Columns
.....................................

The format of a *Note `DATE': datetime. value is `'YYYY-MM-DD''.
According to standard SQL, no other format is permitted. You should use
this format in *Note `UPDATE': update. expressions and in the `WHERE'
clause of *Note `SELECT': select. statements. For example:

     SELECT * FROM t1 WHERE date >= '2003-05-05';

As a convenience, MySQL automatically converts a date to a number if
the date is used in a numeric context and vice versa. MySQL also
permits a `relaxed' string format when updating and in a `WHERE' clause
that compares a date to a *Note `DATE': datetime, *Note `DATETIME':
datetime, or *Note `TIMESTAMP': datetime. column.  `Relaxed' format
means that any punctuation character may be used as the separator
between parts. For example, `'2004-08-15'' and `'2004#08#15'' are
equivalent. MySQL can also convert a string containing no separators
(such as `'20040815''), provided it makes sense as a date.

When you compare a *Note `DATE': datetime, *Note `TIME': time, *Note
`DATETIME': datetime, or *Note `TIMESTAMP': datetime. to a constant
string with the `<', `<=', `=', `>=', `>', or `BETWEEN' operators,
MySQL normally converts the string to an internal long integer for
faster comparison (and also for a bit more `relaxed' string checking).
However, this conversion is subject to the following exceptions:

   * When you compare two columns

   * When you compare a *Note `DATE': datetime, *Note `TIME': time,
     *Note `DATETIME': datetime, or *Note `TIMESTAMP': datetime. column
     to an expression

   * When you use any comparison method other than those just listed,
     such as `IN' or `STRCMP()'.

For those exceptions, the comparison is done by converting the objects
to strings and performing a string comparison.

To be on the safe side, assume that strings are compared as strings and
use the appropriate string functions if you want to compare a temporal
value to a string.

The special `zero' date `'0000-00-00'' can be stored and retrieved as
`'0000-00-00'.' When a `'0000-00-00'' date is used through
Connector/ODBC, it is automatically converted to `NULL' because ODBC
cannot handle that kind of date.

Because MySQL performs the conversions just described, the following
statements work (assume that `idate' is a *Note `DATE': datetime.
column):

     INSERT INTO t1 (idate) VALUES (19970505);
     INSERT INTO t1 (idate) VALUES ('19970505');
     INSERT INTO t1 (idate) VALUES ('97-05-05');
     INSERT INTO t1 (idate) VALUES ('1997.05.05');
     INSERT INTO t1 (idate) VALUES ('1997 05 05');
     INSERT INTO t1 (idate) VALUES ('0000-00-00');

     SELECT idate FROM t1 WHERE idate >= '1997-05-05';
     SELECT idate FROM t1 WHERE idate >= 19970505;
     SELECT MOD(idate,100) FROM t1 WHERE idate >= 19970505;
     SELECT idate FROM t1 WHERE idate >= '19970505';

However, the following statement does not work:

     SELECT idate FROM t1 WHERE STRCMP(idate,'20030505')=0;

`STRCMP()' is a string function, so it converts `idate' to a string in
`'YYYY-MM-DD'' format and performs a string comparison. It does not
convert `'20030505'' to the date `'2003-05-05'' and perform a date
comparison.

If you enable the `ALLOW_INVALID_DATES' SQL mode, MySQL permits you to
store dates that are given only limited checking: MySQL requires only
that the day is in the range from 1 to 31 and the month is in the range
from 1 to 12.  This makes MySQL very convenient for Web applications
where you obtain year, month, and day in three different fields and you
want to store exactly what the user inserted (without date validation).

MySQL permits you to store dates where the day or month and day are
zero. This is convenient if you want to store a birthdate in a *Note
`DATE': datetime. column and you know only part of the date. To
disallow zero month or day parts in dates, enable the `NO_ZERO_IN_DATE'
SQL mode.

MySQL permits you to store a `zero' value of `'0000-00-00'' as a `dummy
date.' This is in some cases more convenient than using `NULL' values.
If a date to be stored in a *Note `DATE': datetime. column cannot be
converted to any reasonable value, MySQL stores `'0000-00-00''. To
disallow `'0000-00-00'', enable the `NO_ZERO_DATE' SQL mode.

To have MySQL check all dates and accept only legal dates (unless
overridden by `IGNORE'), set the `sql_mode' system variable to
`"NO_ZERO_IN_DATE,NO_ZERO_DATE"'.


File: manual.info,  Node: problems-with-null,  Next: problems-with-alias,  Prev: using-date,  Up: query-issues

C.5.5.3 Problems with `NULL' Values
...................................

The concept of the `NULL' value is a common source of confusion for
newcomers to SQL, who often think that `NULL' is the same thing as an
empty string `'''. This is not the case. For example, the following
statements are completely different:

     mysql> INSERT INTO my_table (phone) VALUES (NULL);
     mysql> INSERT INTO my_table (phone) VALUES ('');

Both statements insert a value into the `phone' column, but the first
inserts a `NULL' value and the second inserts an empty string. The
meaning of the first can be regarded as `phone number is not known' and
the meaning of the second can be regarded as `the person is known to
have no phone, and thus no phone number.'

To help with `NULL' handling, you can use the `IS NULL' and `IS NOT
NULL' operators and the `IFNULL()' function.

In SQL, the `NULL' value is never true in comparison to any other
value, even `NULL'.  An expression that contains `NULL' always produces
a `NULL' value unless otherwise indicated in the documentation for the
operators and functions involved in the expression. All columns in the
following example return `NULL':

     mysql> SELECT NULL, 1+NULL, CONCAT('Invisible',NULL);

To search for column values that are `NULL', you cannot use an `expr =
NULL' test. The following statement returns no rows, because `expr =
NULL' is never true for any expression:

     mysql> SELECT * FROM my_table WHERE phone = NULL;

To look for `NULL' values, you must use the `IS NULL' test. The
following statements show how to find the `NULL' phone number and the
empty phone number:

     mysql> SELECT * FROM my_table WHERE phone IS NULL;
     mysql> SELECT * FROM my_table WHERE phone = '';

See *Note working-with-null::, for additional information and examples.

You can add an index on a column that can have `NULL' values if you are
using the `MyISAM', `InnoDB', or `MEMORY' storage engine. Otherwise,
you must declare an indexed column `NOT NULL', and you cannot insert
`NULL' into the column.

When reading data with *Note `LOAD DATA INFILE': load-data, empty or
missing columns are updated with `'''. To load a `NULL' value into a
column, use `\N' in the data file. The literal word ``NULL'' may also
be used under some circumstances. See *Note load-data::.

When using `DISTINCT', `GROUP BY', or `ORDER BY', all `NULL' values are
regarded as equal.

When using `ORDER BY', `NULL' values are presented first, or last if
you specify `DESC' to sort in descending order.

Aggregate (summary) functions such as `COUNT()', `MIN()', and `SUM()'
ignore `NULL' values. The exception to this is `COUNT(*)', which counts
rows and not individual column values. For example, the following
statement produces two counts. The first is a count of the number of
rows in the table, and the second is a count of the number of
non-`NULL' values in the `age' column:

     mysql> SELECT COUNT(*), COUNT(age) FROM person;

For some data types, MySQL handles `NULL' values specially. If you
insert `NULL' into a *Note `TIMESTAMP': datetime. column, the current
date and time is inserted. If you insert `NULL' into an integer or
floating-point column that has the `AUTO_INCREMENT' attribute, the next
number in the sequence is inserted.


File: manual.info,  Node: problems-with-alias,  Next: nontransactional-tables,  Prev: problems-with-null,  Up: query-issues

C.5.5.4 Problems with Column Aliases
....................................

An alias can be used in a query select list to give a column a
different name. You can use the alias in `GROUP BY', `ORDER BY', or
`HAVING' clauses to refer to the column:

     SELECT SQRT(a*b) AS root FROM TBL_NAME
       GROUP BY root HAVING root > 0;
     SELECT id, COUNT(*) AS cnt FROM TBL_NAME
       GROUP BY id HAVING cnt > 0;
     SELECT id AS 'Customer identity' FROM TBL_NAME;

Standard SQL disallows references to column aliases in a `WHERE'
clause. This restriction is imposed because when the `WHERE' clause is
evaluated, the column value may not yet have been determined. For
example, the following query is illegal:

     SELECT id, COUNT(*) AS cnt FROM TBL_NAME
       WHERE cnt > 0 GROUP BY id;

The `WHERE' clause determines which rows should be included in the
`GROUP BY' clause, but it refers to the alias of a column value that is
not known until after the rows have been selected, and grouped by the
`GROUP BY'.

In the select list of a query, a quoted column alias can be specified
using identifier or string quoting characters:

     SELECT 1 AS `one`, 2 AS 'two';

Elsewhere in the statement, quoted references to the alias must use
identifier quoting or the reference is treated as a string literal. For
example, this statement groups by the values in column `id', referenced
using the alias ``a`':

     SELECT id AS 'a', COUNT(*) AS cnt FROM TBL_NAME
       GROUP BY `a`;

But this statement groups by the literal string `'a'' and will not work
as expected:

     SELECT id AS 'a', COUNT(*) AS cnt FROM TBL_NAME
       GROUP BY 'a';


File: manual.info,  Node: nontransactional-tables,  Next: deleting-from-related-tables,  Prev: problems-with-alias,  Up: query-issues

C.5.5.5 Rollback Failure for Nontransactional Tables
....................................................

If you receive the following message when trying to perform a *Note
`ROLLBACK': commit, it means that one or more of the tables you used in
the transaction do not support transactions:

     Warning: Some non-transactional changed tables couldn't be rolled back

These nontransactional tables are not affected by the *Note `ROLLBACK':
commit.  statement.

If you were not deliberately mixing transactional and nontransactional
tables within the transaction, the most likely cause for this message
is that a table you thought was transactional actually is not. This can
happen if you try to create a table using a transactional storage
engine that is not supported by your *Note `mysqld': mysqld. server (or
that was disabled with a startup option). If *Note `mysqld': mysqld.
does not support a storage engine, it instead creates the table as a
`MyISAM' table, which is nontransactional.

You can check the storage engine for a table by using either of these
statements:

     SHOW TABLE STATUS LIKE 'TBL_NAME';
     SHOW CREATE TABLE TBL_NAME;

See *Note show-table-status::, and *Note show-create-table::.

You can check which storage engines your *Note `mysqld': mysqld. server
supports by using this statement:

     SHOW ENGINES;

You can also use the following statement, and check the value of the
variable that is associated with the storage engine in which you are
interested:

     SHOW VARIABLES LIKE 'have_%';

For example, to determine whether the `InnoDB' storage engine is
available, check the value of the `have_innodb' variable.

See *Note show-engines::, and *Note show-variables::.


File: manual.info,  Node: deleting-from-related-tables,  Next: no-matching-rows,  Prev: nontransactional-tables,  Up: query-issues

C.5.5.6 Deleting Rows from Related Tables
.........................................

If the total length of the *Note `DELETE': delete. statement for
`related_table' is more than 1MB (the default value of the
`max_allowed_packet' system variable), you should split it into smaller
parts and execute multiple *Note `DELETE': delete. statements. You
probably get the fastest *Note `DELETE': delete.  by specifying only
100 to 1,000 `related_column' values per statement if the
`related_column' is indexed. If the `related_column' isn't indexed, the
speed is independent of the number of arguments in the `IN' clause.


File: manual.info,  Node: no-matching-rows,  Next: problems-with-float,  Prev: deleting-from-related-tables,  Up: query-issues

C.5.5.7 Solving Problems with No Matching Rows
..............................................

If you have a complicated query that uses many tables but that returns
no rows, you should use the following procedure to find out what is
wrong:

  1. Test the query with *Note `EXPLAIN': explain.  to check whether
     you can find something that is obviously wrong. See *Note
     explain::.

  2. Select only those columns that are used in the `WHERE' clause.

  3. Remove one table at a time from the query until it returns some
     rows. If the tables are large, it is a good idea to use `LIMIT 10'
     with the query.

  4. Issue a *Note `SELECT': select. for the column that should have
     matched a row against the table that was last removed from the
     query.

  5. If you are comparing *Note `FLOAT': floating-point-types.  or
     *Note `DOUBLE': floating-point-types. columns with numbers that
     have decimals, you cannot use equality (`=') comparisons. This
     problem is common in most computer languages because not all
     floating-point values can be stored with exact precision. In some
     cases, changing the *Note `FLOAT': floating-point-types. to a
     *Note `DOUBLE': floating-point-types. fixes this. See *Note
     problems-with-float::.

  6. If you still cannot figure out what is wrong, create a minimal
     test that can be run with `mysql test < query.sql' that shows your
     problems. You can create a test file by dumping the tables with
     *Note `mysqldump --quick db_name TBL_NAME_1 ... TBL_NAME_N >
     query.sql': mysqldump. Open the file in an editor, remove some
     insert lines (if there are more than needed to demonstrate the
     problem), and add your *Note `SELECT': select. statement at the end
     of the file.

     Verify that the test file demonstrates the problem by executing
     these commands:

          shell> mysqladmin create test2
          shell> mysql test2 < query.sql

     Attach the test file to a bug report, which you can file using the
     instructions in *Note bug-reports::.


File: manual.info,  Node: problems-with-float,  Prev: no-matching-rows,  Up: query-issues

C.5.5.8 Problems with Floating-Point Values
...........................................

Floating-point numbers sometimes cause confusion because they are
approximate and not stored as exact values. A floating-point value as
written in an SQL statement may not be the same as the value
represented internally. Attempts to treat floating-point values as
exact in comparisons may lead to problems. They are also subject to
platform or implementation dependencies. The *Note `FLOAT':
floating-point-types. and *Note `DOUBLE': floating-point-types. data
types are subject to these issues. For *Note `DECIMAL':
fixed-point-types.  columns, MySQL performs operations with a precision
of 65 decimal digits, which should solve most common inaccuracy
problems.

The following example uses *Note `DOUBLE': floating-point-types. to
demonstrate how calculations that are done using floating-point
operations are subject to floating-point error.

     mysql> CREATE TABLE t1 (i INT, d1 DOUBLE, d2 DOUBLE);
     mysql> INSERT INTO t1 VALUES (1, 101.40, 21.40), (1, -80.00, 0.00),
         -> (2, 0.00, 0.00), (2, -13.20, 0.00), (2, 59.60, 46.40),
         -> (2, 30.40, 30.40), (3, 37.00, 7.40), (3, -29.60, 0.00),
         -> (4, 60.00, 15.40), (4, -10.60, 0.00), (4, -34.00, 0.00),
         -> (5, 33.00, 0.00), (5, -25.80, 0.00), (5, 0.00, 7.20),
         -> (6, 0.00, 0.00), (6, -51.40, 0.00);

     mysql> SELECT i, SUM(d1) AS a, SUM(d2) AS b
         -> FROM t1 GROUP BY i HAVING a <> b;

     +------+-------+------+
     | i    | a     | b    |
     +------+-------+------+
     |    1 |  21.4 | 21.4 |
     |    2 |  76.8 | 76.8 |
     |    3 |   7.4 |  7.4 |
     |    4 |  15.4 | 15.4 |
     |    5 |   7.2 |  7.2 |
     |    6 | -51.4 |    0 |
     +------+-------+------+

The result is correct. Although the first five records look like they
should not satisfy the comparison (the values of `a' and `b' do not
appear to be different), they may do so because the difference between
the numbers shows up around the tenth decimal or so, depending on
factors such as computer architecture or the compiler version or
optimization level. For example, different CPUs may evaluate
floating-point numbers differently.

If columns `d1' and `d2' had been defined as *Note `DECIMAL':
fixed-point-types. rather than *Note `DOUBLE': floating-point-types,
the result of the *Note `SELECT': select. query would have contained
only one row--the last one shown above.

The correct way to do floating-point number comparison is to first
decide on an acceptable tolerance for differences between the numbers
and then do the comparison against the tolerance value. For example, if
we agree that floating-point numbers should be regarded the same if
they are same within a precision of one in ten thousand (0.0001), the
comparison should be written to find differences larger than the
tolerance value:

     mysql> SELECT i, SUM(d1) AS a, SUM(d2) AS b FROM t1
         -> GROUP BY i HAVING ABS(a - b) > 0.0001;
     +------+-------+------+
     | i    | a     | b    |
     +------+-------+------+
     |    6 | -51.4 |    0 |
     +------+-------+------+
     1 row in set (0.00 sec)

Conversely, to get rows where the numbers are the same, the test should
find differences within the tolerance value:

     mysql> SELECT i, SUM(d1) AS a, SUM(d2) AS b FROM t1
         -> GROUP BY i HAVING ABS(a - b) <= 0.0001;
     +------+------+------+
     | i    | a    | b    |
     +------+------+------+
     |    1 | 21.4 | 21.4 |
     |    2 | 76.8 | 76.8 |
     |    3 |  7.4 |  7.4 |
     |    4 | 15.4 | 15.4 |
     |    5 |  7.2 |  7.2 |
     +------+------+------+
     5 rows in set (0.03 sec)

Floating-point values are subject to platform or implementation
dependencies. Suppose that you execute the following statements:

     CREATE TABLE t1(c1 FLOAT(53,0), c2 FLOAT(53,0));
     INSERT INTO t1 VALUES('1e+52','-1e+52');
     SELECT * FROM t1;

On some platforms, the `SELECT' statement returns `inf' and `-inf'. On
others, it returns `0' and `-0'.

An implication of the preceding issues is that if you attempt to create
a replication slave by dumping table contents with *Note `mysqldump':
mysqldump. on the master and reloading the dump file into the slave,
tables containing floating-point columns might differ between the two
hosts.


File: manual.info,  Node: optimizer-issues,  Next: table-definition-issues,  Prev: query-issues,  Up: problems

C.5.6 Optimizer-Related Issues
------------------------------

MySQL uses a cost-based optimizer to determine the best way to resolve
a query. In many cases, MySQL can calculate the best possible query
plan, but sometimes MySQL does not have enough information about the
data at hand and has to make `educated' guesses about the data.

For the cases when MySQL does not do the "right" thing, tools that you
have available to help MySQL are:

   * Use the *Note `EXPLAIN': explain. statement to get information
     about how MySQL processes a query. To use it, just add the keyword
     *Note `EXPLAIN': explain. to the front of your *Note `SELECT':
     select. statement:

          mysql> EXPLAIN SELECT * FROM t1, t2 WHERE t1.i = t2.i;

     *Note `EXPLAIN': explain. is discussed in more detail in *Note
     explain::.

   * Use `ANALYZE TABLE TBL_NAME' to update the key distributions for
     the scanned table. See *Note analyze-table::.

   * Use `FORCE INDEX' for the scanned table to tell MySQL that table
     scans are very expensive compared to using the given index:

          SELECT * FROM t1, t2 FORCE INDEX (index_for_column)
          WHERE t1.col_name=t2.col_name;

     `USE INDEX' and `IGNORE INDEX' may also be useful. See *Note
     index-hints::.

   * Global and table-level `STRAIGHT_JOIN'. See *Note select::.

   * You can tune global or thread-specific system variables. For
     example, start *Note `mysqld': mysqld. with the
     `--max-seeks-for-key=1000' option or use `SET
     max_seeks_for_key=1000' to tell the optimizer to assume that no
     key scan causes more than 1,000 key seeks. See *Note
     server-system-variables::.


File: manual.info,  Node: table-definition-issues,  Next: bugs,  Prev: optimizer-issues,  Up: problems

C.5.7 Table Definition-Related Issues
-------------------------------------

* Menu:

* alter-table-problems::         Problems with `ALTER TABLE'
* temporary-table-problems::     `TEMPORARY' Table Problems


File: manual.info,  Node: alter-table-problems,  Next: temporary-table-problems,  Prev: table-definition-issues,  Up: table-definition-issues

C.5.7.1 Problems with `ALTER TABLE'
...................................

If you get a duplicate-key error when using *Note `ALTER TABLE':
alter-table. to change the character set or collation of a character
column, the cause is either that the new column collation maps two keys
to the same value or that the table is corrupted. In the latter case,
you should run *Note `REPAIR TABLE': repair-table. on the table.

If *Note `ALTER TABLE': alter-table. dies with the following error, the
problem may be that MySQL crashed during an earlier *Note `ALTER
TABLE': alter-table.  operation and there is an old table named `A-XXX'
or `B-XXX' lying around:

     Error on rename of './database/name.frm'
     to './database/B-XXX.frm' (Errcode: 17)

In this case, go to the MySQL data directory and delete all files that
have names starting with `A-' or `B-'. (You may want to move them
elsewhere instead of deleting them.)

*Note `ALTER TABLE': alter-table. works in the following way:

   * Create a new table named `A-XXX' with the requested structural
     changes.

   * Copy all rows from the original table to `A-XXX'.

   * Rename the original table to `B-XXX'.

   * Rename `A-XXX' to your original table name.

   * Delete `B-XXX'.

If something goes wrong with the renaming operation, MySQL tries to
undo the changes. If something goes seriously wrong (although this
shouldn't happen), MySQL may leave the old table as `B-XXX'. A simple
rename of the table files at the system level should get your data back.

If you use *Note `ALTER TABLE': alter-table. on a transactional table
or if you are using Windows, *Note `ALTER TABLE': alter-table. unlocks
the table if you had done a *Note `LOCK TABLE': lock-tables. on it.
This is done because `InnoDB' and these operating systems cannot drop a
table that is in use.


File: manual.info,  Node: temporary-table-problems,  Prev: alter-table-problems,  Up: table-definition-issues

C.5.7.2 `TEMPORARY' Table Problems
..................................

The following list indicates limitations on the use of `TEMPORARY'
tables:

   * A `TEMPORARY' table can only be of type `MEMORY', `MyISAM',
     `MERGE', or `InnoDB'.

     Temporary tables are not supported for MySQL Cluster.

   * You cannot refer to a `TEMPORARY' table more than once in the same
     query. For example, the following does not work:

          mysql> SELECT * FROM temp_table, temp_table AS t2;
          ERROR 1137: Can't reopen table: 'temp_table'

     This error also occurs if you refer to a temporary table multiple
     times in a stored function under different aliases, even if the
     references occur in different statements within the function.

   * The *Note `SHOW TABLES': show-tables. statement does not list
     `TEMPORARY' tables.

   * You cannot use `RENAME' to rename a `TEMPORARY' table. However,
     you can use *Note `ALTER TABLE': alter-table. instead:

          mysql> ALTER TABLE orig_name RENAME new_name;

   * There are known issues in using temporary tables with replication.
     See *Note replication-features::, for more information.


File: manual.info,  Node: bugs,  Prev: table-definition-issues,  Up: problems

C.5.8 Known Issues in MySQL
---------------------------

This section lists known issues in recent versions of MySQL.

For information about platform-specific issues, see the installation
and porting instructions in *Note general-installation-issues::, and
*Note porting::.

The following problems are known:

   * Subquery optimization for `IN' is not as effective as for `='.

   * Even if you use `lower_case_table_names=2' (which enables MySQL to
     remember the case used for databases and table names), MySQL does
     not remember the case used for database names for the function
     `DATABASE()' or within the various logs (on case-insensitive
     systems).

   * Dropping a `FOREIGN KEY' constraint does not work in replication
     because the constraint may have another name on the slave.

   * *Note `REPLACE': replace. (and *Note `LOAD DATA': load-data. with
     the *Note `REPLACE': replace. option) does not trigger `ON DELETE
     CASCADE'.

   * `DISTINCT' with `ORDER BY' does not work inside `GROUP_CONCAT()'
     if you do not use all and only those columns that are in the
     `DISTINCT' list.

   * When inserting a big integer value (between 2^63 and 2^64-1) into
     a decimal or string column, it is inserted as a negative value
     because the number is evaluated in a signed integer context.

   * *Note `ANALYZE TABLE': analyze-table, *Note `OPTIMIZE TABLE':
     optimize-table, and *Note `REPAIR TABLE': repair-table. may cause
     problems on tables for which you are using *Note `INSERT DELAYED':
     insert-delayed.

   * With statement-based binary logging, the master writes the
     executed queries to the binary log. This is a very fast, compact,
     and efficient logging method that works perfectly in most cases.
     However, it is possible for the data on the master and slave to
     become different if a query is designed in such a way that the
     data modification is nondeterministic (generally not a recommended
     practice, even outside of replication).

     For example:

        * *Note `CREATE TABLE ... SELECT': create-table-select. or
          *Note `INSERT ... SELECT': insert-select. statements that
          insert zero or `NULL' values into an `AUTO_INCREMENT' column.

        * *Note `DELETE': delete. if you are deleting rows from a table
          that has foreign keys with `ON DELETE CASCADE' properties.

        * *Note `REPLACE ... SELECT': replace, `INSERT IGNORE ...
          SELECT' if you have duplicate key values in the inserted data.

     *If and only if the preceding queries have no `ORDER BY' clause
     guaranteeing a deterministic order*.

     For example, for *Note `INSERT ... SELECT': insert-select. with no
     `ORDER BY', the *Note `SELECT': select. may return rows in a
     different order (which results in a row having different ranks,
     hence getting a different number in the `AUTO_INCREMENT' column),
     depending on the choices made by the optimizers on the master and
     slave.

     A query is optimized differently on the master and slave only if:

        * The table is stored using a different storage engine on the
          master than on the slave. (It is possible to use different
          storage engines on the master and slave. For example, you can
          use `InnoDB' on the master, but `MyISAM' on the slave if the
          slave has less available disk space.)

        * MySQL buffer sizes (`key_buffer_size', and so on) are
          different on the master and slave.

        * The master and slave run different MySQL versions, and the
          optimizer code differs between these versions.

     This problem may also affect database restoration using
     `mysqlbinlog|mysql'.

     The easiest way to avoid this problem is to add an `ORDER BY'
     clause to the aforementioned nondeterministic queries to ensure
     that the rows are always stored or modified in the same order.
     Using row-based or mixed logging format also avoids the problem.

   * Log file names are based on the server host name if you do not
     specify a file name with the startup option. To retain the same
     log file names if you change your host name to something else, you
     must explicitly use options such as `--log-bin=OLD_HOST_NAME-bin'.
     See *Note server-options::. Alternatively, rename the old files to
     reflect your host name change. If these are binary logs, you must
     edit the binary log index file and fix the binary log file names
     there as well. (The same is true for the relay logs on a slave
     server.)

   * *Note `mysqlbinlog': mysqlbinlog. does not delete temporary files
     left after a *Note `LOAD DATA INFILE': load-data. statement. See
     *Note mysqlbinlog::.

   * `RENAME' does not work with `TEMPORARY' tables or tables used in a
     `MERGE' table.

   * When using `SET CHARACTER SET', you cannot use translated
     characters in database, table, and column names.

   * You cannot use ``_'' or ``%'' with `ESCAPE' in `LIKE ...  ESCAPE'.

   * Only the first `max_sort_length' bytes are used when comparing
     data values. This means that values cannot reliably be used in
     `GROUP BY', `ORDER BY' or `DISTINCT' if they are not distinct in
     the first `max_sort_length' bytes. To work around this, increase
     the variable value. The default value of `max_sort_length' is 1024
     and can be changed at server startup time or at runtime.

   * Numeric calculations are done with *Note `BIGINT': integer-types.
     or *Note `DOUBLE': floating-point-types. (both are normally 64
     bits long). Which precision you get depends on the function.  The
     general rule is that bit functions are performed with *Note
     `BIGINT': integer-types. precision, `IF()' and `ELT()' with *Note
     `BIGINT': integer-types. or *Note `DOUBLE': floating-point-types.
     precision, and the rest with *Note `DOUBLE': floating-point-types.
     precision.  You should try to avoid using unsigned long long
     values if they resolve to be larger than 63 bits
     (9223372036854775807) for anything other than bit fields.

   * You can have up to 255 *Note `ENUM': enum.  and *Note `SET': set.
     columns in one table.

   * In `MIN()', `MAX()', and other aggregate functions, MySQL
     currently compares *Note `ENUM': enum. and *Note `SET': set.
     columns by their string value rather than by the string's relative
     position in the set.

   * In an *Note `UPDATE': update. statement, columns are updated from
     left to right. If you refer to an updated column, you get the
     updated value instead of the original value. For example, the
     following statement increments `KEY' by `2', *not* `1':

          mysql> UPDATE TBL_NAME SET KEY=KEY+1,KEY=KEY+1;

   * You can refer to multiple temporary tables in the same query, but
     you cannot refer to any given temporary table more than once. For
     example, the following does not work:

          mysql> SELECT * FROM temp_table, temp_table AS t2;
          ERROR 1137: Can't reopen table: 'temp_table'

   * The optimizer may handle `DISTINCT' differently when you are using
     `hidden' columns in a join than when you are not. In a join,
     hidden columns are counted as part of the result (even if they are
     not shown), whereas in normal queries, hidden columns do not
     participate in the `DISTINCT' comparison.

     An example of this is:

          SELECT DISTINCT mp3id FROM band_downloads
                 WHERE userid = 9 ORDER BY id DESC;

     and

          SELECT DISTINCT band_downloads.mp3id
                 FROM band_downloads,band_mp3
                 WHERE band_downloads.userid = 9
                 AND band_mp3.id = band_downloads.mp3id
                 ORDER BY band_downloads.id DESC;

     In the second case, using MySQL Server 3.23.x, you may get two
     identical rows in the result set (because the values in the hidden
     `id' column may differ).

     Note that this happens only for queries that do not have the
     `ORDER BY' columns in the result.

   * If you execute a `PROCEDURE' on a query that returns an empty set,
     in some cases the `PROCEDURE' does not transform the columns.

   * Creation of a table of type `MERGE' does not check whether the
     underlying tables are compatible types.

   * If you use *Note `ALTER TABLE': alter-table. to add a `UNIQUE'
     index to a table used in a `MERGE' table and then add a normal
     index on the `MERGE' table, the key order is different for the
     tables if there was an old, non-`UNIQUE' key in the table. This is
     because *Note `ALTER TABLE': alter-table. puts `UNIQUE' indexes
     before normal indexes to be able to detect duplicate keys as early
     as possible.


File: manual.info,  Node: news,  Next: restrictions,  Prev: error-handling,  Up: Top

Appendix D MySQL Release Notes
******************************

Release notes for MySQL Server and associated products are no longer
published in the MySQL Reference Manual. Instead, see these release
notes documents:

   * MySQL 5.5 Release Notes
     (http://dev.mysql.com/doc/relnotes/mysql/5.5/en/)

   * MySQL Cluster 7.2 Release Notes
     (http://dev.mysql.com/doc/relnotes/mysql-cluster/7.2/en/)

   * MySQL Connector/ODBC Release Notes
     (http://dev.mysql.com/doc/relnotes/connector-odbc/en/)

   * MySQL Connector/Net Release Notes
     (http://dev.mysql.com/doc/relnotes/connector-net/en/) (includes
     MySQL Visual Studio Plugin release notes)

   * MySQL Connector/J Release Notes
     (http://dev.mysql.com/doc/relnotes/connector-j/en/)

   * MySQL Connector/C++ Release Notes
     (http://dev.mysql.com/doc/relnotes/connector-cpp/en/)

   * MySQL Proxy Release Notes
     (http://dev.mysql.com/doc/relnotes/mysql-proxy/en/)

   * MySQL for Excel Release Notes
     (http://dev.mysql.com/doc/relnotes/mysql-for-excel/en/)

   * MySQL Installer Release Notes
     (http://dev.mysql.com/doc/relnotes/mysql-installer/en/)


File: manual.info,  Node: restrictions,  Next: glossary,  Prev: news,  Up: Top

Appendix E Restrictions and Limits
**********************************

* Menu:

* stored-program-restrictions::  Restrictions on Stored Programs
* condition-handling-restrictions::  Restrictions on Condition Handling
* cursor-restrictions::          Restrictions on Server-Side Cursors
* subquery-restrictions::        Restrictions on Subqueries
* view-restrictions::            Restrictions on Views
* xa-restrictions::              Restrictions on XA Transactions
* charset-restrictions::         Restrictions on Character Sets
* performance-schema-restrictions::  Restrictions on Performance Schema
* pluggable-authentication-restrictions::  Restrictions on Pluggable Authentication
* limits::                       Limits in MySQL

The discussion here describes restrictions that apply to the use of
MySQL features such as subqueries or views.


File: manual.info,  Node: stored-program-restrictions,  Next: condition-handling-restrictions,  Prev: restrictions,  Up: restrictions

E.1 Restrictions on Stored Programs
===================================

These restrictions apply to the features described in *Note
stored-programs-views::.

Some of the restrictions noted here apply to all stored routines; that
is, both to stored procedures and stored functions. There are also some
restrictions specific to stored functions but not to stored procedures.

The restrictions for stored functions also apply to triggers.  There
are also some restrictions specific to triggers.

The restrictions for stored procedures also apply to the *Note `DO':
do. clause of Event Scheduler event definitions. There are also some
restrictions specific to events.

* SQL Statements Not Permitted in Stored Routines *

Stored routines cannot contain arbitrary SQL statements. The following
statements are not permitted:

   * The locking statements *Note `LOCK TABLES': lock-tables. and *Note
     `UNLOCK TABLES': lock-tables.

   * *Note `ALTER VIEW': alter-view.

   * *Note `LOAD DATA': load-data. and `LOAD TABLE'.

   * SQL prepared statements (*Note `PREPARE': prepare, *Note
     `EXECUTE': execute, *Note `DEALLOCATE PREPARE':
     deallocate-prepare.) can be used in stored procedures, but not
     stored functions or triggers.  Thus, stored functions and triggers
     cannot use dynamic SQL (where you construct statements as strings
     and then execute them).

   * Generally, statements not permitted in SQL prepared statements are
     also not permitted in stored programs. For a list of statements
     supported as prepared statements, see *Note
     sql-syntax-prepared-statements::. Exceptions are *Note `SIGNAL':
     signal. and *Note `RESIGNAL': resignal, which are not permissible
     as prepared statements but are permitted in stored programs.

   * Because local variables are in scope only during stored program
     execution, references to them are not permitted in prepared
     statements created within a stored program. Prepared statement
     scope is the current session, not the stored program, so the
     statement could be executed after the program ends, at which point
     the variables would no longer be in scope. For example, `SELECT
     ... INTO LOCAL_VAR' cannot be used as a prepared statement. This
     restriction also applies to stored procedure and function
     parameters. See *Note prepare::.

   * Inserts cannot be delayed. *Note `INSERT DELAYED': insert-delayed.
     syntax is accepted, but the statement is handled as a normal *Note
     `INSERT': insert.

   * Within all stored programs (stored procedures and functions,
     triggers, and events), the parser treats *Note `BEGIN [WORK]':
     commit.  as the beginning of a *Note `BEGIN ... END': begin-end.
     block. To begin a transaction in this context, use *Note `START
     TRANSACTION': commit. instead.

* Restrictions for Stored Functions *

The following additional statements or operations are not permitted
within stored functions. They are permitted within stored procedures,
except stored procedures that are invoked from within a stored function
or trigger. For example, if you use *Note `FLUSH': flush. in a stored
procedure, that stored procedure cannot be called from a stored
function or trigger.

   * Statements that perform explicit or implicit commit or rollback.
     Support for these statements is not required by the SQL standard,
     which states that each DBMS vendor may decide whether to permit
     them.

   * Statements that return a result set. This includes *Note `SELECT':
     select. statements that do not have an `INTO VAR_LIST' clause and
     other statements such as *Note `SHOW': show, *Note `EXPLAIN':
     explain, and *Note `CHECK TABLE': check-table. A function can
     process a result set either with *Note `SELECT ... INTO VAR_LIST':
     select-into. or by using a cursor and *Note `FETCH': fetch.
     statements.  See *Note select-into::, and *Note cursors::.

   * *Note `FLUSH': flush. statements.

   * Stored functions cannot be used recursively.

   * A stored function or trigger cannot modify a table that is already
     being used (for reading or writing) by the statement that invoked
     the function or trigger.

   * If you refer to a temporary table multiple times in a stored
     function under different aliases, a `Can't reopen table:
     'TBL_NAME`''' error occurs, even if the references occur in
     different statements within the function.

   * *Note `HANDLER ... READ': handler. statements that invoke stored
     functions can cause replication errors. As of MySQL 5.5.7, such
     statements are disallowed.

* Restrictions for Triggers *

For triggers, the following additional restrictions apply:

   * Triggers are not activated by foreign key actions.

   * When using row-based replication, triggers on the slave are not
     activated by statements originating on the master. The triggers on
     the slave are activated when using statement-based replication.
     For more information, see *Note replication-features-triggers::.

   * The *Note `RETURN': return. statement is not permitted in
     triggers, which cannot return a value. To exit a trigger
     immediately, use the *Note `LEAVE': leave. statement.

   * Triggers are not permitted on tables in the `mysql' database.

   * The trigger cache does not detect when metadata of the underlying
     objects has changed. If a trigger uses a table and the table has
     changed since the trigger was loaded into the cache, the trigger
     operates using the outdated metadata.

* Name Conflicts within Stored Routines *

The same identifier might be used for a routine parameter, a local
variable, and a table column. Also, the same local variable name can be
used in nested blocks. For example:

     CREATE PROCEDURE p (i INT)
     BEGIN
       DECLARE i INT DEFAULT 0;
       SELECT i FROM t;
       BEGIN
         DECLARE i INT DEFAULT 1;
         SELECT i FROM t;
       END;
     END;

In such cases, the identifier is ambiguous and the following precedence
rules apply:

   * A local variable takes precedence over a routine parameter or
     table column.

   * A routine parameter takes precedence over a table column.

   * A local variable in an inner block takes precedence over a local
     variable in an outer block.

The behavior that variables take precedence over table columns is
nonstandard.

* Replication Considerations *

Use of stored routines can cause replication problems. This issue is
discussed further in *Note stored-programs-logging::.

The `--replicate-wild-do-table=DB_NAME.TBL_NAME' option applies to
tables, views, and triggers. It does not apply to stored procedures and
functions, or events. To filter statements operating on the latter
objects, use one or more of the `--replicate-*-db' options.

* Debugging Considerations *

There are no stored routine debugging facilities.

* Unsupported Syntax from the SQL:2003 Standard *

The MySQL stored routine syntax is based on the SQL:2003 standard.  The
following items from that standard are not currently supported:

   * `UNDO' handlers

   * `FOR' loops

* Concurrency Considerations *

To prevent problems of interaction between sessions, when a client
issues a statement, the server uses a snapshot of routines and triggers
available for execution of the statement. That is, the server
calculates a list of procedures, functions, and triggers that may be
used during execution of the statement, loads them, and then proceeds
to execute the statement. While the statement executes, it does not see
changes to routines performed by other sessions.

For maximum concurrency, stored functions should minimize their
side-effects; in particular, updating a table within a stored function
can reduce concurrent operations on that table. A stored function
acquires table locks before executing, to avoid inconsistency in the
binary log due to mismatch of the order in which statements execute and
when they appear in the log. When statement-based binary logging is
used, statements that invoke a function are recorded rather than the
statements executed within the function. Consequently, stored functions
that update the same underlying tables do not execute in parallel. In
contrast, stored procedures do not acquire table-level locks. All
statements executed within stored procedures are written to the binary
log, even for statement-based binary logging. See *Note
stored-programs-logging::.

* Event Scheduler Restrictions *

The following limitations are specific to the Event Scheduler:

   * Event names are handled in case-insensitive fashion. For example,
     you cannot have two events in the same database with the names
     `anEvent' and `AnEvent'.

   * An event may not be created, altered, or dropped by a stored
     routine, trigger, or another event. An event also may not create,
     alter, or drop stored routines or triggers. (Bug #16409, Bug
     #18896)

   * As of MySQL 5.5.8, DDL statements on events are prohibited while a
     *Note `LOCK TABLES': lock-tables. statement is in effect.

   * Event timings using the intervals `YEAR', `QUARTER', `MONTH', and
     `YEAR_MONTH' are resolved in months; those using any other
     interval are resolved in seconds. There is no way to cause events
     scheduled to occur at the same second to execute in a given order.
     In addition--due to rounding, the nature of threaded applications,
     and the fact that a nonzero length of time is required to create
     events and to signal their execution--events may be delayed by as
     much as 1 or 2 seconds. However, the time shown in the *Note
     `INFORMATION_SCHEMA.EVENTS': events-table. table's `LAST_EXECUTED'
     column or the `mysql.event' table's `last_executed' column is
     always accurate to within one second of the actual event execution
     time. (See also Bug #16522.)

   * Each execution of the statements contained in the body of an event
     takes place in a new connection; thus, these statements has no
     effect in a given user session on the server's statement counts
     such as `Com_select' and `Com_insert' that are displayed by *Note
     `SHOW STATUS': show-status. However, such counts _are_ updated in
     the global scope.  (Bug #16422)

   * Events do not support times later than the end of the Unix Epoch;
     this is approximately the beginning of the year 2038.  Such dates
     are specifically not permitted by the Event Scheduler. (Bug #16396)

   * References to stored functions, user-defined functions, and tables
     in the `ON SCHEDULE' clauses of *Note `CREATE EVENT':
     create-event. and *Note `ALTER EVENT': alter-event. statements are
     not supported. These sorts of references are not permitted. (See
     Bug #22830 for more information.)

Stored routines and triggers in MySQL Cluster

Stored procedures, stored functions, and triggers are all supported by
tables using the *Note `NDB': mysql-cluster.  storage engine; however,
it is important to keep in mind that they do _not_ propagate
automatically between MySQL Servers acting as Cluster SQL nodes. This
is because of the following:

   * Stored routine definitions are kept in tables in the `mysql'
     system database using the `MyISAM' storage engine, and so do not
     participate in clustering.

   * The `.TRN' and `.TRG' files containing trigger definitions are not
     read by the *Note `NDB': mysql-cluster. storage engine, and are not
     copied between Cluster nodes.

Any stored routine or trigger that interacts with MySQL Cluster tables
must be re-created by running the appropriate *Note `CREATE PROCEDURE':
create-procedure, *Note `CREATE FUNCTION': create-function, or *Note
`CREATE TRIGGER': create-trigger. statements on each MySQL Server that
participates in the cluster where you wish to use the stored routine or
trigger. Similarly, any changes to existing stored routines or triggers
must be carried out explicitly on all Cluster SQL nodes, using the
appropriate `ALTER' or `DROP' statements on each MySQL Server accessing
the cluster.

*Warning*:

Do _not_ attempt to work around the issue described in the first item
mentioned previously by converting any `mysql' database tables to use
the *Note `NDB': mysql-cluster. storage engine.  _Altering the system
tables in the `mysql' database is not supported_ and is very likely to
produce undesirable results.


File: manual.info,  Node: condition-handling-restrictions,  Next: cursor-restrictions,  Prev: stored-program-restrictions,  Up: restrictions

E.2 Restrictions on Condition Handling
======================================

*Note `SIGNAL': signal. and *Note `RESIGNAL': resignal. are not
permissible as prepared statements. For example, this statement is
invalid:

     PREPARE stmt1 FROM 'SIGNAL SQLSTATE "02000"';

`SQLSTATE' values in class `'04'' are not treated specially. They are
handled the same as other exceptions.


File: manual.info,  Node: cursor-restrictions,  Next: subquery-restrictions,  Prev: condition-handling-restrictions,  Up: restrictions

E.3 Restrictions on Server-Side Cursors
=======================================

Server-side cursors are implemented in the C API using the *Note
`mysql_stmt_attr_set()': mysql-stmt-attr-set. function.  The same
implementation is used for cursors in stored routines. A server-side
cursor enables a result set to be generated on the server side, but not
transferred to the client except for those rows that the client
requests. For example, if a client executes a query but is only
interested in the first row, the remaining rows are not transferred.

In MySQL, a server-side cursor is materialized into an internal
temporary table. Initially, this is a `MEMORY' table, but is converted
to a `MyISAM' table when its size exceeds the minimum value of the
`max_heap_table_size' and `tmp_table_size' system variables.  Note that
the same restrictions apply to internal temporary tables created to
hold the result set for a cursor as for other uses of internal
temporary tables. See *Note internal-temporary-tables::. One limitation
of the implementation is that for a large result set, retrieving its
rows through a cursor might be slow.

Cursors are read only; you cannot use a cursor to update rows.

`UPDATE WHERE CURRENT OF' and `DELETE WHERE CURRENT OF' are not
implemented, because updatable cursors are not supported.

Cursors are nonholdable (not held open after a commit).

Cursors are asensitive.

Cursors are nonscrollable.

Cursors are not named. The statement handler acts as the cursor ID.

You can have open only a single cursor per prepared statement. If you
need several cursors, you must prepare several statements.

You cannot use a cursor for a statement that generates a result set if
the statement is not supported in prepared mode. This includes
statements such as *Note `CHECK TABLE': check-table, `HANDLER READ', and
*Note `SHOW BINLOG EVENTS': show-binlog-events.


File: manual.info,  Node: subquery-restrictions,  Next: view-restrictions,  Prev: cursor-restrictions,  Up: restrictions

E.4 Restrictions on Subqueries
==============================

   * Subquery optimization for `IN' is not as effective as for the `='
     operator or for the `IN(VALUE_LIST)' operator.

     A typical case for poor `IN' subquery performance is when the
     subquery returns a small number of rows but the outer query
     returns a large number of rows to be compared to the subquery
     result.

     The problem is that, for a statement that uses an `IN' subquery,
     the optimizer rewrites it as a correlated subquery. Consider the
     following statement that uses an uncorrelated subquery:

          SELECT ... FROM t1 WHERE t1.a IN (SELECT b FROM t2);

     The optimizer rewrites the statement to a correlated subquery:

          SELECT ... FROM t1 WHERE EXISTS (SELECT 1 FROM t2 WHERE t2.b = t1.a);

     If the inner and outer queries return M and N rows, respectively,
     the execution time becomes on the order of O(MxN), rather than
     O(M+N) as it would be for an uncorrelated subquery.

     An implication is that an `IN' subquery can be much slower than a
     query written using an `IN(VALUE_LIST)' operator that lists the
     same values that the subquery would return.

   * In general, you cannot modify a table and select from the same
     table in a subquery. For example, this limitation applies to
     statements of the following forms:

          DELETE FROM t WHERE ... (SELECT ... FROM t ...);
          UPDATE t ... WHERE col = (SELECT ... FROM t ...);
          {INSERT|REPLACE} INTO t (SELECT ... FROM t ...);

     Exception: The preceding prohibition does not apply if you are
     using a subquery for the modified table in the `FROM' clause.
     Example:

          UPDATE t ... WHERE col = (SELECT * FROM (SELECT ... FROM t...) AS _t ...);

     Here the result from the subquery in the `FROM' clause is stored
     as a temporary table, so the relevant rows in `t' have already been
     selected by the time the update to `t' takes place.

   * Row comparison operations are only partially supported:

        * For `EXPR [NOT] IN SUBQUERY', EXPR can be an N-tuple
          (specified using row constructor syntax) and the subquery can
          return rows of N-tuples. The permitted syntax is therefore
          more specifically expressed as `ROW_CONSTRUCTOR [NOT] IN
          TABLE_SUBQUERY'

        * For `EXPR OP {ALL|ANY|SOME} SUBQUERY', EXPR must be a scalar
          value and the subquery must be a column subquery; it cannot
          return multiple-column rows.

     In other words, for a subquery that returns rows of N-tuples, this
     is supported:

          (EXPR_1, ..., EXPR_N) [NOT] IN TABLE_SUBQUERY

     But this is not supported:

          (EXPR_1, ..., EXPR_N) OP {ALL|ANY|SOME} SUBQUERY

     The reason for supporting row comparisons for `IN' but not for the
     others is that `IN' is implemented by rewriting it as a sequence
     of `=' comparisons and `AND' operations.  This approach cannot be
     used for `ALL', `ANY', or `SOME'.

   * Subqueries in the `FROM' clause cannot be correlated subqueries.
     They are materialized in whole (evaluated to produce a result set)
     before evaluating the outer query, so they cannot be evaluated per
     row of the outer query.

   * MySQL does not support `LIMIT' in subqueries for certain subquery
     operators:

          mysql> SELECT * FROM t1
              ->   WHERE s1 IN (SELECT s2 FROM t2 ORDER BY s1 LIMIT 1);
          ERROR 1235 (42000): This version of MySQL doesn't yet support
           'LIMIT & IN/ALL/ANY/SOME subquery'

   * The optimizer is more mature for joins than for subqueries, so in
     many cases a statement that uses a subquery can be executed more
     efficiently if you rewrite it as a join.

     An exception occurs for the case where an `IN' subquery can be
     rewritten as a *Note `SELECT DISTINCT': select. join. Example:

          SELECT col FROM t1 WHERE id_col IN (SELECT id_col2 FROM t2 WHERE CONDITION);

     That statement can be rewritten as follows:

          SELECT DISTINCT col FROM t1, t2 WHERE t1.id_col = t2.id_col AND CONDITION;

     But in this case, the join requires an extra `DISTINCT' operation
     and is not more efficient than the subquery.

   * MySQL permits a subquery to refer to a stored function that has
     data-modifying side effects such as inserting rows into a table.
     For example, if `f()' inserts rows, the following query can modify
     data:

          SELECT ... WHERE x IN (SELECT f() ...);

     This behavior is an extension to the SQL standard. In MySQL, it
     can produce indeterminate results because `f()' might be executed
     a different number of times for different executions of a given
     query depending on how the optimizer chooses to handle it.

     For statement-based or mixed-format replication, one implication
     of this indeterminism is that such a query can produce different
     results on the master and its slaves.


File: manual.info,  Node: view-restrictions,  Next: xa-restrictions,  Prev: subquery-restrictions,  Up: restrictions

E.5 Restrictions on Views
=========================

View processing is not optimized:

   * It is not possible to create an index on a view.

   * Indexes can be used for views processed using the merge algorithm.
     However, a view that is processed with the temptable algorithm is
     unable to take advantage of indexes on its underlying tables
     (although indexes can be used during generation of the temporary
     tables).

Subqueries cannot be used in the `FROM' clause of a view.

There is a general principle that you cannot modify a table and select
from the same table in a subquery. See *Note subquery-restrictions::.

The same principle also applies if you select from a view that selects
from the table, if the view selects from the table in a subquery and
the view is evaluated using the merge algorithm.  Example:

     CREATE VIEW v1 AS
     SELECT * FROM t2 WHERE EXISTS (SELECT 1 FROM t1 WHERE t1.a = t2.a);

     UPDATE t1, v2 SET t1.a = 1 WHERE t1.b = v2.b;

If the view is evaluated using a temporary table, you _can_ select from
the table in the view subquery and still modify that table in the outer
query. In this case the view will be stored in a temporary table and
thus you are not really selecting from the table in a subquery and
modifying it `at the same time.' (This is another reason you might wish
to force MySQL to use the temptable algorithm by specifying `ALGORITHM
= TEMPTABLE' in the view definition.)

You can use *Note `DROP TABLE': drop-table. or *Note `ALTER TABLE':
alter-table. to drop or alter a table that is used in a view
definition. No warning results from the `DROP' or `ALTER' operation,
even though this invalidates the view. Instead, an error occurs later,
when the view is used. *Note `CHECK TABLE': check-table. can be used to
check for views that have been invalidated by `DROP' or `ALTER'
operations.

A view definition is `frozen' by certain statements:

   * If a statement prepared by *Note `PREPARE': prepare. refers to a
     view, the view definition seen each time the statement is executed
     later will be the definition of the view at the time it was
     prepared. This is true even if the view definition is changed
     after the statement is prepared and before it is executed.
     Example:

          CREATE VIEW v AS SELECT RAND();
          PREPARE s FROM 'SELECT * FROM v';
          ALTER VIEW v AS SELECT NOW();
          EXECUTE s;

     The result returned by the *Note `EXECUTE': execute. statement is
     a random number, not the current date and time.

With regard to view updatability, the overall goal for views is that if
any view is theoretically updatable, it should be updatable in
practice. This includes views that have *Note `UNION': union. in their
definition.  Currently, not all views that are theoretically updatable
can be updated. The initial view implementation was deliberately written
this way to get usable, updatable views into MySQL as quickly as
possible. Many theoretically updatable views can be updated now, but
limitations still exist:

   * Updatable views with subqueries anywhere other than in the `WHERE'
     clause. Some views that have subqueries in the *Note `SELECT':
     select. list may be updatable.

   * You cannot use *Note `UPDATE': update. to update more than one
     underlying table of a view that is defined as a join.

   * You cannot use *Note `DELETE': delete. to update a view that is
     defined as a join.

There exists a shortcoming with the current implementation of views. If
a user is granted the basic privileges necessary to create a view (the
`CREATE VIEW' and `SELECT' privileges), that user will be unable to
call *Note `SHOW CREATE VIEW': show-create-view.  on that object unless
the user is also granted the `SHOW VIEW' privilege.

That shortcoming can lead to problems backing up a database with *Note
`mysqldump': mysqldump, which may fail due to insufficient privileges.
This problem is described in Bug #22062.

The workaround to the problem is for the administrator to manually
grant the `SHOW VIEW' privilege to users who are granted `CREATE VIEW',
since MySQL doesn't grant it implicitly when views are created.

Views do not have indexes, so index hints do not apply. Use of index
hints when selecting from a view is not permitted.

*Note `SHOW CREATE VIEW': show-create-view. displays view definitions
using an `AS ALIAS_NAME' clause for each column. If a column is created
from an expression, the default alias is the expression text, which can
be quite long. Aliases for column names in *Note `CREATE VIEW':
create-view.  statements are checked against the maximum column length
of 64 characters (not the maximum alias length of 256 characters). As a
result, views created from the output of *Note `SHOW CREATE VIEW':
show-create-view. fail if any column alias exceeds 64 characters. This
can cause problems in the following circumstances for views with
too-long aliases:

   * View definitions fail to replicate to newer slaves that enforce
     the column-length restriction.

   * Dump files created with *Note `mysqldump': mysqldump. cannot be
     loaded into servers that enforce the column-length restriction.

A workaround for either problem is the modify each problematic view
definition to use aliases that provide shorter column names.  Then the
view will replicate properly, and can be dumped and reloaded without
causing an error. To modify the definition, drop and create the view
again with *Note `DROP VIEW': drop-view. and *Note `CREATE VIEW':
create-view, or replace the definition with *Note `CREATE OR REPLACE
VIEW': create-view.

For problems that occur when reloading view definitions in dump files,
another workaround is to edit the dump file to modify its *Note `CREATE
VIEW': create-view. statements. However, this does not change the
original view definitions, which may cause problems for subsequent dump
operations.


File: manual.info,  Node: xa-restrictions,  Next: charset-restrictions,  Prev: view-restrictions,  Up: restrictions

E.6 Restrictions on XA Transactions
===================================

XA transaction support is limited to the `InnoDB' storage engine.

For `external XA,' a MySQL server acts as a Resource Manager and client
programs act as Transaction Managers. For `Internal XA', storage
engines within a MySQL server act as RMs, and the server itself acts as
a TM. Internal XA support is limited by the capabilities of individual
storage engines. Internal XA is required for handling XA transactions
that involve more than one storage engine. The implementation of
internal XA requires that a storage engine support two-phase commit at
the table handler level, and currently this is true only for `InnoDB'.

For *Note `XA START': xa-statements, the `JOIN' and `RESUME' clauses
are not supported.

For *Note `XA END': xa-statements, the `SUSPEND [FOR MIGRATE]' clause
is not supported.

The requirement that the BQUAL part of the XID value be different for
each XA transaction within a global transaction is a limitation of the
current MySQL XA implementation. It is not part of the XA specification.

If an XA transaction has reached the `PREPARED' state and the MySQL
server is killed (for example, with *Note `kill -9': kill. on Unix) or
shuts down abnormally, the transaction can be continued after the
server restarts. However, if the client reconnects and commits the
transaction, the transaction will be absent from the binary log even
though it has been committed. This means the data and the binary log
have gone out of synchrony. An implication is that XA cannot be used
safely together with replication.

It is possible that the server will roll back a pending XA transaction,
even one that has reached the `PREPARED' state. This happens if a client
connection terminates and the server continues to run, or if clients
are connected and the server shuts down gracefully. (In the latter
case, the server marks each connection to be terminated, and then rolls
back the `PREPARED' XA transaction associated with it.) It should be
possible to commit or roll back a `PREPARED' XA transaction, but this
cannot be done without changes to the binary logging mechanism.


File: manual.info,  Node: charset-restrictions,  Next: performance-schema-restrictions,  Prev: xa-restrictions,  Up: restrictions

E.7 Restrictions on Character Sets
==================================

   * Identifiers are stored in `mysql' database tables (`user', `db',
     and so forth) using `utf8', but identifiers can contain only
     characters in the Basic Multilingual Plane (BMP).  Supplementary
     characters are not permitted in identifiers.

   * The `ucs2', `utf16', and `utf32' character sets have the following
     restrictions:

        * They cannot be used as a client character set, which means
          that they do not work for `SET NAMES' or `SET CHARACTER SET'.
          (See *Note charset-connection::.)

        * It is currently not possible to use *Note `LOAD DATA INFILE':
          load-data. to load data files that use these character sets.

        * `FULLTEXT' indexes cannot be created on a column that uses
          any of these character sets. However, you can perform `IN
          BOOLEAN MODE' searches on the column without an index.

        * The use of `ENCRYPT()' with these character sets is not
          recommended because the underlying system call expects a
          string terminated by a zero byte.

   * The `REGEXP' and `RLIKE' operators work in byte-wise fashion, so
     they are not multi-byte safe and may produce unexpected results
     with multi-byte character sets. In addition, these operators
     compare characters by their byte values and accented characters
     may not compare as equal even if a given collation treats them as
     equal.


File: manual.info,  Node: performance-schema-restrictions,  Next: pluggable-authentication-restrictions,  Prev: charset-restrictions,  Up: restrictions

E.8 Restrictions on Performance Schema
======================================

The Performance Schema avoids using mutexes to collect or produce data,
so there are no guarantees of consistency and results can sometimes be
incorrect. Event values in `performance_schema' tables are
nondeterministic and nonrepeatable.

If you save event information in another table, you should not assume
that the original events will still be available later. For example, if
you select events from a `performance_schema' table into a temporary
table, intending to join that table with the original table later,
there might be no matches.

*Note `mysqldump': mysqldump. and `BACKUP DATABASE' ignore tables in the
`performance_schema' database.

Tables in the `performance_schema' database cannot be locked with `LOCK
TABLES', except the `setup_XXX' tables.

Tables in the `performance_schema' database cannot be indexed.

Results for queries that refer to tables in the `performance_schema'
database are not saved in the query cache.

Tables in the `performance_schema' database are not replicated.

The Performance Schema is not available in `libmysqld', the embedded
server.

The types of timers might vary per platform. The *Note
`performance_timers': performance-timers-table. table shows which event
timers are available. If the values in this table for a given timer
name are `NULL', that timer is not supported on your platform.

Instruments that apply to storage engines might not be implemented for
all storage engines. Instrumentation of each third-party engine is the
responsibility of the engine maintainer.


File: manual.info,  Node: pluggable-authentication-restrictions,  Next: limits,  Prev: performance-schema-restrictions,  Up: restrictions

E.9 Restrictions on Pluggable Authentication
============================================

The first part of this section describes general restrictions on the
applicability of the pluggable authentication framework described at
*Note pluggable-authentication::. The second part describes how
third-party connector developers can determine the extent to which a
connector can take advantage of pluggable authentication capabilities
and what steps to take to become more compliant.

The term `native authentication' used here refers to authentication
against passwords stored in the `Password' column of the `mysql.user'
table. This is the same authentication method provided by MySQL servers
older than 5.5.7, before pluggable authentication was implemented. It
remains the default method in 5.5.7 and up, although now it is
implemented using plugins. `Windows native authentication' refers to
authentication using the credentials of a user who has already logged
in to Windows, as implemented by the Windows Native Authentication
plugin (`Windows plugin' for short).

* General Pluggable Authentication Restrictions *

   * *Connector/C, Connector/C++:* Clients that use these connectors
     can connect to the server only through accounts that use native
     authentication.

     Exception: A connector supports pluggable authentication if it was
     built to link to `libmysqlclient' dynamically (rather than
     statically) and it loads the current version of `libmysqlclient'
     if that version is installed, or if the connector is recompiled
     from source to link against the current `libmysqlclient'.

   * *Connector/J:* Clients that use this connector can connect to the
     server only through accounts that use native authentication.

   * *Connector/Net:* Before Connector/Net 6.4.4, clients that use this
     connector can connect to the server only through accounts that use
     native authentication. As of 6.4.4, clients can also connect to the
     server through accounts that use the Windows plugin.

   * *Connector/ODBC:* Before Connector/ODBC 3.51.29 and 5.1.9, clients
     that use this connector can connect to the server only through
     accounts that use native authentication. As of 3.51.29 and 5.1.9,
     clients that use binary releases of this connector for Windows can
     also connect to the server through accounts that use the PAM or
     Windows plugins. (These capabilities result from linking the
     Connector/ODBC binaries against the MySQL 5.5.16 `libmysqlclient'
     rather than the MySQL 5.1 `libmysqlclient' used previously. The
     newer `libmysqlclient' includes the client-side support needed for
     the server-side PAM and Windows authentication plugins.)

   * *Connector/PHP:* Clients that use this connector can connect to
     the server only through accounts that use native authentication,
     when compiled using the MySQL native driver for PHP (`mysqlnd').

   * *MySQL Proxy:* Before MySQL Proxy 0.8.2, clients can connect to
     the server only through accounts that use native authentication.
     As of 0.8.2, clients can also connect to the server through
     accounts that use the PAM plugin. As of 0.8.3, clients can also
     connect to the server through accounts that use the Windows plugin.

   * *MySQL Enterprise Backup:* MySQL Enterprise Backup before version
     3.6.1 supports connections to the server only through accounts
     that use native authentication. As of 3.6.1, MySQL Enterprise
     Backup can connect to the server through accounts that use
     nonnative authentication.

   * *Windows native authentication:* Connecting through an account that
     uses the Windows plugin requires Windows Domain setup. Without it,
     NTLM authentication is used and then only local connections are
     possible; that is, the client and server must run on the same
     computer.

   * *Proxy users:* Proxy user support is available to the extent that
     clients can connect through accounts authenticated with plugins
     that implement proxy user capability (that is, plugins that can
     return a user name different from that of the connecting user).
     For example, the native authentication plugins do not support
     proxy users, whereas the PAM and Windows plugins do.

   * *Replication:* Before MySQL 5.5.17, replication slaves can connect
     to the master server only through master accounts that use native
     authentication.  As of 5.5.17 (or 5.5.19 for Windows native
     authentication), replication slaves can also connect through
     master accounts that use nonnative authentication if the required
     client-side plugin is available. If the plugin is built into
     `libmysqlclient', it is available by default.  Otherwise, the
     plugin must be installed on the slave side in the directory named
     by the slave `plugin_dir' system variable.

   * **Note `FEDERATED': federated-storage-engine.  tables:* A *Note
     `FEDERATED': federated-storage-engine.  table can access the
     remote table only through accounts on the remote server that use
     native authentication.

* Pluggable Authentication and Third-Party Connectors *

Third-party connector developers can use the following guidelines to
determine readiness of a connector to take advantage of pluggable
authentication capabilities and what steps to take to become more
compliant:

   * An existing connector to which no changes have been made uses
     native authentication and clients that use the connector can
     connect to the server only through accounts that use native
     authentication. _However, you should test the connector against a
     recent version of the server to verify that such connections still
     work without problem._

     Exception: A connector might work with pluggable authentication
     without any changes if it links to `libmysqlclient' dynamically
     (rather than statically) and it loads the current version of
     `libmysqlclient' if that version is installed.

   * To take advantage of pluggable authentication capabilities, a
     connector that is `libmysqlclient'-based should be relinked
     against the current version of `libmysqlclient'. This enables the
     connector to support connections though accounts that require
     client-side plugins now built into `libmysqlclient' (such as the
     cleartext plugin needed for PAM authentication and the Windows
     plugin needed for Windows native authentication). Linking with a
     current `libmysqlclient' also enables the connector to access
     client-side plugins installed in the default MySQL plugin
     directory (typically the directory named by the default value of
     the local server's `plugin_dir' system variable).

     If a connector links to `libmysqlclient' dynamically, it must be
     ensured that the newer version of `libmysqlclient' is installed on
     the client host and that the connector loads it at runtime.

   * Another way for a connector to support a given authentication
     method is to implement it directly in the client/server protocol.
     Connector/Net uses this approach to provide support for Windows
     native authentication.

   * If a connector should be able to load client-side plugins from a
     directory different from the default plugin directory, it must
     implement some means for client users to specify the directory.
     Possibilities for this include a command-line option or
     environment variable from which the connector can obtain the
     directory name. Standard MySQL client programs such as *Note
     `mysql': mysql. and *Note `mysqladmin': mysqladmin.  implement a
     `--plugin-dir' option. See also *Note c-api-plugin-functions::.

   * Proxy user support by a connector depends, as described earlier in
     this section, on whether the authentication methods that it
     supports permit proxy users.


File: manual.info,  Node: limits,  Prev: pluggable-authentication-restrictions,  Up: restrictions

E.10 Limits in MySQL
====================

* Menu:

* joins-limits::                 Limits of Joins
* database-count-limit::         Limits on Number of Databases and Tables
* table-size-limit::             Limits on Table Size
* column-count-limit::           Limits on Table Column Count and Row Size
* limits-frm-file::              Limits Imposed by `.frm' File Structure
* limits-windows::               Windows Platform Limitations

This section lists current limits in MySQL 5.5.


File: manual.info,  Node: joins-limits,  Next: database-count-limit,  Prev: limits,  Up: limits

E.10.1 Limits of Joins
----------------------

The maximum number of tables that can be referenced in a single join is
61. This also applies to the number of tables that can be referenced in
the definition of a view.


File: manual.info,  Node: database-count-limit,  Next: table-size-limit,  Prev: joins-limits,  Up: limits

E.10.2 Limits on Number of Databases and Tables
-----------------------------------------------

MySQL has no limit on the number of databases. The underlying file
system may have a limit on the number of directories.

MySQL has no limit on the number of tables. The underlying file system
may have a limit on the number of files that represent tables.
Individual storage engines may impose engine-specific constraints.
`InnoDB' permits up to 4 billion tables.


File: manual.info,  Node: table-size-limit,  Next: column-count-limit,  Prev: database-count-limit,  Up: limits

E.10.3 Limits on Table Size
---------------------------

The effective maximum table size for MySQL databases is usually
determined by operating system constraints on file sizes, not by MySQL
internal limits. The following table lists some examples of operating
system file-size limits. This is only a rough guide and is not intended
to be definitive. For the most up-to-date information, be sure to check
the documentation specific to your operating system.

This table lists examples of operating system file-size limits.

Operating System       File-size Limit
Win32 w/ FAT/FAT32     2GB/4GB
Win32 w/ NTFS          2TB (possibly larger)
Linux 2.2-Intel 32-bit 2GB (LFS: 4GB)
Linux 2.4+             (using ext3 file system) 4TB
Solaris 9/10           16TB
Mac OS X w/ HFS+       2TB

Windows users, please note that FAT and VFAT (FAT32) are _not_
considered suitable for production use with MySQL. Use NTFS instead.

On Linux 2.2, you can get `MyISAM' tables larger than 2GB in size by
using the Large File Support (LFS) patch for the ext2 file system. Most
current Linux distributions are based on kernel 2.4 or higher and
include all the required LFS patches. On Linux 2.4, patches also exist
for ReiserFS to get support for big files (up to 2TB). With JFS and XFS,
petabyte and larger files are possible on Linux.

For a detailed overview about LFS in Linux, have a look at Andreas
Jaeger's `Large File Support in Linux' page at
`http://www.suse.de/~aj/linux_lfs.html'.

If you do encounter a full-table error, there are several reasons why
it might have occurred:

   * The disk might be full.

   * The `InnoDB' storage engine maintains `InnoDB' tables within a
     tablespace that can be created from several files. This enables a
     table to exceed the maximum individual file size. The tablespace
     can include raw disk partitions, which permits extremely large
     tables. The maximum tablespace size is 64TB.

     If you are using `InnoDB' tables and run out of room in the
     `InnoDB' tablespace. In this case, the solution is to extend the
     `InnoDB' tablespace. See *Note innodb-data-log-reconfiguration::.

   * You are using `MyISAM' tables on an operating system that supports
     files only up to 2GB in size and you have hit this limit for the
     data file or index file.

   * You are using a `MyISAM' table and the space required for the
     table exceeds what is permitted by the internal pointer size.
     `MyISAM' permits data and index files to grow up to 256TB by
     default, but this limit can be changed up to the maximum
     permissible size of 65,536TB (256^7 - 1 bytes).

     If you need a `MyISAM' table that is larger than the default limit
     and your operating system supports large files, the *Note `CREATE
     TABLE': create-table.  statement supports `AVG_ROW_LENGTH' and
     `MAX_ROWS' options. See *Note create-table::. The server uses these
     options to determine how large a table to permit.

     If the pointer size is too small for an existing table, you can
     change the options with *Note `ALTER TABLE': alter-table. to
     increase a table's maximum permissible size. See *Note
     alter-table::.

          ALTER TABLE TBL_NAME MAX_ROWS=1000000000 AVG_ROW_LENGTH=NNN;

     You have to specify `AVG_ROW_LENGTH' only for tables with *Note
     `BLOB': blob. or *Note `TEXT': blob. columns; in this case, MySQL
     can't optimize the space required based only on the number of rows.

     To change the default size limit for `MyISAM' tables, set the
     `myisam_data_pointer_size', which sets the number of bytes used
     for internal row pointers. The value is used to set the pointer
     size for new tables if you do not specify the `MAX_ROWS' option.
     The value of `myisam_data_pointer_size' can be from 2 to 7. A
     value of 4 permits tables up to 4GB; a value of 6 permits tables
     up to 256TB.

     You can check the maximum data and index sizes by using this
     statement:

          SHOW TABLE STATUS FROM DB_NAME LIKE 'TBL_NAME';

     You also can use *Note `myisamchk -dv /path/to/table-index-file':
     myisamchk. See *Note show::, or *Note myisamchk::.

     Other ways to work around file-size limits for `MyISAM' tables are
     as follows:

        * If your large table is read only, you can use *Note
          `myisampack': myisampack. to compress it.  *Note
          `myisampack': myisampack. usually compresses a table by at
          least 50%, so you can have, in effect, much bigger tables.
          *Note `myisampack': myisampack. also can merge multiple
          tables into a single table. See *Note myisampack::.

        * MySQL includes a `MERGE' library that enables you to handle a
          collection of `MyISAM' tables that have identical structure
          as a single `MERGE' table.  See *Note merge-storage-engine::.

   * You are using the *Note `NDB': mysql-cluster. storage engine, in
     which case you need to increase the values for the `DataMemory' and
     `IndexMemory' configuration parameters in your `config.ini' file.
     See *Note mysql-cluster-params-ndbd::.

   * You are using the `MEMORY' (`HEAP') storage engine; in this case
     you need to increase the value of the `max_heap_table_size' system
     variable. See *Note server-system-variables::.


File: manual.info,  Node: column-count-limit,  Next: limits-frm-file,  Prev: table-size-limit,  Up: limits

E.10.4 Limits on Table Column Count and Row Size
------------------------------------------------

There is a hard limit of 4096 columns per table, but the effective
maximum may be less for a given table. The exact limit depends on
several interacting factors.

   * Every table (regardless of storage engine) has a maximum row size
     of 65,535 bytes. Storage engines may place additional constraints
     on this limit, reducing the effective maximum row size.

     The maximum row size constrains the number (and possibly size) of
     columns because the total length of all columns cannot exceed this
     size. For example, `utf8' characters require up to three bytes per
     character, so for a *Note `CHAR(255) CHARACTER SET utf8': char.
     column, the server must allocate 255 x 3 = 765 bytes per value.
     Consequently, a table cannot contain more than 65,535 / 765 = 85
     such columns.

     Storage for variable-length columns includes length bytes, which
     are assessed against the row size. For example, a *Note
     `VARCHAR(255) CHARACTER SET utf8': char. column takes two bytes to
     store the length of the value, so each value can take up to 767
     bytes.

     *Note `BLOB': blob. and *Note `TEXT': blob. columns count from one
     to four plus eight bytes each toward the row-size limit because
     their contents are stored separately from the rest of the row.

     Declaring columns `NULL' can reduce the maximum number of columns
     permitted. For *Note `MyISAM': myisam-storage-engine. tables,
     `NULL' columns require additional space in the row to record
     whether their values are `NULL'. Each `NULL' column takes one bit
     extra, rounded up to the nearest byte. The maximum row length in
     bytes can be calculated as follows:

          row length = 1
                       + (SUM OF COLUMN LENGTHS)
                       + (NUMBER OF NULL COLUMNS + DELETE_FLAG + 7)/8
                       + (NUMBER OF VARIABLE-LENGTH COLUMNS)

     DELETE_FLAG is 1 for tables with static row format. Static tables
     use a bit in the row record for a flag that indicates whether the
     row has been deleted.  DELETE_FLAG is 0 for dynamic tables because
     the flag is stored in the dynamic row header.  For information
     about *Note `MyISAM': myisam-storage-engine.  table formats, see
     *Note myisam-table-formats::.

     For *Note `InnoDB': innodb-storage-engine. tables, storage size is
     the same for `NULL' and `NOT NULL' columns, so the preceding
     calculations do not apply.

     The following statement to create table `t1' succeeds because the
     columns require 32,765 + 2 bytes and 32,766 + 2 bytes, which falls
     within the maximum row size of 65,535 bytes:

          mysql> CREATE TABLE t1
              -> (c1 VARCHAR(32765) NOT NULL, c2 VARCHAR(32766) NOT NULL)
              -> ENGINE = MyISAM CHARACTER SET latin1;
          Query OK, 0 rows affected (0.02 sec)

     The following statement to create table `t2' fails because the
     columns are `NULL' and *Note `MyISAM': myisam-storage-engine.
     requires additional space that causes the row size to exceed
     65,535 bytes:

          mysql> CREATE TABLE t2
              -> (c1 VARCHAR(32765) NULL, c2 VARCHAR(32766) NULL)
              -> ENGINE = MyISAM CHARACTER SET latin1;
          ERROR 1118 (42000): Row size too large. The maximum row size for the
          used table type, not counting BLOBs, is 65535. You have to change some
          columns to TEXT or BLOBs

     The following statement to create table `t3' fails because,
     although the column length is within the maximum length of 65,535
     bytes, two additional bytes are required to record the length,
     which causes the row size to exceed 65,535 bytes:

          mysql> CREATE TABLE t3
              -> (c1 VARCHAR(65535) NOT NULL)
              -> ENGINE = MyISAM CHARACTER SET latin1;
          ERROR 1118 (42000): Row size too large. The maximum row size for the
          used table type, not counting BLOBs, is 65535. You have to change some
          columns to TEXT or BLOBs

     Reducing the column length to 65,533 or less permits the statement
     to succeed.

   * Individual storage engines might impose additional restrictions
     that limit table column count. Examples:

        * *Note `InnoDB': innodb-storage-engine. permits up to 1000
          columns.

        * *Note `InnoDB': innodb-storage-engine. restricts row size to
          something less than half a database page (approximately 8000
          bytes), not including *Note `VARBINARY': binary-varbinary,
          *Note `VARCHAR': char, *Note `BLOB': blob, or *Note `TEXT':
          blob. columns.

        * Different *Note `InnoDB': innodb-storage-engine. storage
          formats (`COMPRESSED', `REDUNDANT') use different amounts of
          page header and trailer data, which affects the amount of
          storage available for rows.

   * Each table has an `.frm' file that contains the table definition.
     The definition affects the content of this file in ways that may
     affect the number of columns permitted in the table. For more
     information, see *Note limits-frm-file::.


File: manual.info,  Node: limits-frm-file,  Next: limits-windows,  Prev: column-count-limit,  Up: limits

E.10.5 Limits Imposed by `.frm' File Structure
----------------------------------------------

Each table has an `.frm' file that contains the table definition. The
server uses the following expression to check some of the table
information stored in the file against an upper limit of 64KB:

     if (info_length+(ulong) create_fields.elements*FCOMP+288+
         n_length+int_length+com_length > 65535L || int_count > 255)

The portion of the information stored in the `.frm' file that is
checked against the expression cannot grow beyond the 64KB limit, so if
the table definition reaches this size, no more columns can be added.

The relevant factors in the expression are:

   * `info_length' is space needed for `screens.' This is related to
     MySQL's Unireg heritage.

   * `create_fields.elements' is the number of columns.

   * `FCOMP' is 17.

   * `n_length' is the total length of all column names, including one
     byte per name as a separator.

   * `int_length' is related to the list of values for *Note `ENUM':
     enum. and *Note `SET': set. columns. In this context, `int' does
     not mean `integer.' It means `interval,' a term that refers
     collectively to *Note `ENUM': enum. and *Note `SET': set. columns.

   * `int_count' is the number of unique *Note `ENUM': enum. and *Note
     `SET': set. definitions.

   * `com_length' is the total length of column comments.

The expression just described has several implications for permitted
table definitions:

   * Using long column names can reduce the maximum number of columns,
     as can the inclusion of *Note `ENUM': enum. or *Note `SET': set.
     columns, or use of column comments.

   * A table can have no more than 255 unique *Note `ENUM': enum. and
     *Note `SET': set. definitions. Columns with identical element
     lists are considered the same against this limt. For example, if a
     table contains these two columns, they count as one (not two)
     toward this limit because the definitions are identical:

          e1 ENUM('a','b','c')
          e2 ENUM('a','b','c')

   * The sum of the length of element names in the unique *Note `ENUM':
     enum. and *Note `SET': set. definitions counts toward the 64KB
     limit, so although the theoretical limit on number of elements in
     a given *Note `ENUM': enum.  column is 65,535, the practical limit
     is less than 3000.


File: manual.info,  Node: limits-windows,  Prev: limits-frm-file,  Up: limits

E.10.6 Windows Platform Limitations
-----------------------------------

The following limitations apply to use of MySQL on the Windows platform:

   * *Process memory*

     On Windows 32-bit platforms, it is not possible by default to use
     more than 2GB of RAM within a single process, including MySQL.
     This is because the physical address limit on Windows 32-bit is
     4GB and the default setting within Windows is to split the virtual
     address space between kernel (2GB) and user/applications (2GB).

     Some versions of Windows have a boot time setting to enable larger
     applications by reducing the kernel application.  Alternatively,
     to use more than 2GB, use a 64-bit version of Windows.

   * *File system aliases*

     When using `MyISAM' tables, you cannot use aliases within Windows
     link to the data files on another volume and then link back to the
     main MySQL `datadir' location.

     This facility is often used to move the data and index files to a
     RAID or other fast solution, while retaining the main `.frm' files
     in the default data directory configured with the `datadir' option.

   * *Limited number of ports*

     Windows systems have about 4,000 ports available for client
     connections, and after a connection on a port closes, it takes two
     to four minutes before the port can be reused. In situations where
     clients connect to and disconnect from the server at a high rate,
     it is possible for all available ports to be used up before closed
     ports become available again. If this happens, the MySQL server
     appears to be unresponsive even though it is running. Note that
     ports may be used by other applications running on the machine as
     well, in which case the number of ports available to MySQL is
     lower.

     For more information about this problem, see
     `http://support.microsoft.com/default.aspx?scid=kb;en-us;196271'.

   * *`DATA DIRECTORY' and `INDEX DIRECTORY'*

     The `DATA DIRECTORY' and `INDEX DIRECTORY' options for *Note
     `CREATE TABLE': create-table. are ignored on Windows, because
     MySQL does not support Windows symbolic links. These options also
     are ignored on systems that have a nonfunctional `realpath()' call.

   * **Note `DROP DATABASE': drop-database.*

     You cannot drop a database that is in use by another session.

   * *Case-insensitive names*

     File names are not case sensitive on Windows, so MySQL database
     and table names are also not case sensitive on Windows. The only
     restriction is that database and table names must be specified
     using the same case throughout a given statement. See *Note
     identifier-case-sensitivity::.

   * *Directory and file names*

     On Windows, MySQL Server supports only directory and file names
     that are compatible with the current ANSI code pages.  For
     example, the following Japanese directory name will not work in
     the Western locale (code page 1252):

          datadir="C:/私たちのプロジェクトのデータ"

     The same limitation applies to directory and file names referred
     to in SQL statements, such as the data file path name in *Note
     `LOAD DATA INFILE': load-data.

   * *The ``\'' path name separator character*

     Path name components in Windows are separated by the ``\''
     character, which is also the escape character in MySQL. If you are
     using *Note `LOAD DATA INFILE': load-data. or *Note `SELECT ...
     INTO OUTFILE': select-into, use Unix-style file names with ``/''
     characters:

          mysql> LOAD DATA INFILE 'C:/tmp/skr.txt' INTO TABLE skr;
          mysql> SELECT * INTO OUTFILE 'C:/tmp/skr.txt' FROM skr;

     Alternatively, you must double the ``\'' character:

          mysql> LOAD DATA INFILE 'C:\\tmp\\skr.txt' INTO TABLE skr;
          mysql> SELECT * INTO OUTFILE 'C:\\tmp\\skr.txt' FROM skr;

   * *Problems with pipes*

     Pipes do not work reliably from the Windows command-line prompt.
     If the pipe includes the character `^Z' / `CHAR(24)', Windows
     thinks that it has encountered end-of-file and aborts the program.

     This is mainly a problem when you try to apply a binary log as
     follows:

          C:\> mysqlbinlog BINARY_LOG_FILE | mysql --user=root

     If you have a problem applying the log and suspect that it is
     because of a `^Z' / `CHAR(24)' character, you can use the
     following workaround:

          C:\> mysqlbinlog BINARY_LOG_FILE --result-file=/tmp/bin.sql
          C:\> mysql --user=root --execute "source /tmp/bin.sql"

     The latter command also can be used to reliably read in any SQL
     file that may contain binary data.


File: manual.info,  Node: glossary,  Prev: restrictions,  Up: Top

Appendix F MySQL Glossary
*************************

These terms are commonly used in information about the MySQL database
server. This glossary originated as a reference for terminology about
the InnoDB storage engine, and the majority of definitions are
InnoDB-related.

ACID

An acronym standing for atomicity, consistency, isolation, and
durability. These properties are all desirable in a database system,
and are all closely tied to the notion of a *transaction*. The
transactional features of InnoDB adhere to the ACID principles.

Transactions are *atomic* units of work that can be *committed* or
*rolled back*. When a transaction makes multiple changes to the
database, either all the changes succeed when the transaction is
committed, or all the changes are undone when the transaction is rolled
back.

The database remains in a consistent state at all times - after each
commit or rollback, and while transactions are in progress.  If related
data is being updated across multiple tables, queries see either all
old values or all new values, not a mix of old and new values.

Transactions are protected (isolated) from each other while they are in
progress; they cannot interfere with each other or see each other's
uncommitted data. This isolation is achieved through the *locking*
mechanism.  Experienced users can adjust the *isolation level*, trading
off less protection in favor of increased performance and
*concurrency*, when they can be sure that the transactions really do
not interfere with each other.

The results of transactions are durable: once a commit operation
succeeds, the changes made by that transaction are safe from power
failures, system crashes, race conditions, or other potential dangers
that many non-database applications are vulnerable to. Durability
typically involves writing to disk storage, with a certain amount of
redundancy to protect against power failures or software crashes during
write operations. (In InnoDB, the *doublewrite buffer* assists with
durability.)  adaptive flushing

An algorithm for *InnoDB* tables that smooths out the I/O overhead
introduced by *checkpoints*. Instead of *flushing* all modified *pages*
from the *buffer pool* to the *data files* at once, MySQL periodically
flushes small sets of modified pages. The adaptive flushing algorithm
extends this process by estimating the optimal rate to perform these
periodic flushes, based on the rate of flushing and how fast *redo*
information is generated.  First introduced in MySQL 5.1, in the InnoDB
Plugin.  adaptive hash index

An optimization for InnoDB tables that can speed up lookups using `='
and `IN' operators, by constructing a *hash index* in memory. MySQL
monitors index searches for InnoDB tables, and if queries could benefit
from a hash index, it builds one automatically for index *pages* that
are frequently accessed. In a sense, the adaptive hash index configures
MySQL at runtime to take advantage of ample main memory, coming closer
to the architecture of main-memory databases. This feature is
controlled by the `innodb_adaptive_hash_index' configuration option.
Because this feature benefits some workloads and not others, and the
memory used for the hash index is reserved in the *buffer pool*,
typically you should benchmark with this feature both enabled and
disabled.

The hash index is always built based on an existing InnoDB *secondary
index*, which is organized as a *B-tree* structure. MySQL can build a
hash index on a prefix of any length of the key defined for the B-tree,
depending on the pattern of searches against the index. A hash index
can be partial; the whole B-tree index does not need to be cached in
the buffer pool.

In MySQL 5.6 and higher, another way to take advantage of fast
single-value lookups with InnoDB tables is to use the *memcached*
interface to InnoDB.  See InnoDB Integration with memcached
(http://dev.mysql.com/doc/refman/5.6/en/innodb-memcached.html) for
details.  AHI

Acronym for *adaptive hash index*.  AIO

Acronym for *asynchronous I/O*.  You might see this acronym in InnoDB
messages or keywords.  Antelope

The code name for the original InnoDB *file format*. It supports the
*redundant* and *compact* row formats, but not the newer *dynamic* and
*compressed* row formats available in the *Barracuda* file format.

If your application could benefit from InnoDB table *compression*, or
uses BLOBs or large text columns that could benefit from the dynamic row
format, you might switch some tables to Barracuda format. You select
the file format to use by setting the `innodb_file_format' option
before creating the table.  application programming interface (API)

A set of functions or procedures. An API provides a stable set of names
and types for functions, procedures, parameters, and return values.
apply

When a backup produced by the *MySQL Enterprise Backup* product does
not include the most recent changes that occurred while the backup was
underway, the process of updating the backup files to include those
changes is known as the *apply* step. It is specified by the
`apply-log' option of the `mysqlbackup' command.

Before the changes are applied, we refer to the files as a *raw
backup*. After the changes are applied, we refer to the files as a
*prepared backup*. The changes are recorded in the *ibbackup_logfile*
file; once the apply step is finished, this file is no longer necessary.
.ARM file

Metadata for ARCHIVE tables. Contrast with *.ARZ file*. Files with this
extension are always included in backups produced by the `mysqlbackup'
command of the *MySQL Enterprise Backup* product.  .ARZ file

Data for ARCHIVE tables. Contrast with *.ARM file*. Files with this
extension are always included in backups produced by the `mysqlbackup'
command of the *MySQL Enterprise Backup* product.  asynchronous I/O

A type of I/O operation that allows other processing to proceed before
the I/O is completed. Also known as *non-blocking I/O* and abbreviated
as *AIO*. InnoDB uses this type of I/O for certain operations that can
run in parallel without affecting the reliability of the database, such
as reading pages into the *buffer pool* that have not actually been
requested, but might be needed soon.

Historically, InnoDB has used asynchronous I/O on Windows systems only.
Starting with the InnoDB Plugin 1.1, InnoDB uses asynchronous I/O on
Linux systems. This change introduces a dependency on `libaio'. On
other Unix-like systems, InnoDB uses synchronous I/O only.  atomic

In the SQL context, *transactions* are units of work that either
succeed entirely (when *committed*) or have no effect at all (when
*rolled back*). The indivisible ("atomic") property of transactions is
the "A" in the acronym *ACID*.  atomic instruction

Special instructions provided by the CPU, to ensure that critical
low-level operations cannot be interrupted.  auto-increment

A property of a table column (specified by the `AUTO_INCREMENT'
keyword) that automatically adds an ascending sequence of values in the
column. InnoDB supports auto-increment only for *primary key* columns.

It saves work for the developer, not to have to produce new unique
values when inserting new rows. It provides useful information for the
query optimizer, because the column is known to be not null and with
unique values. The values from such a column can be used as lookup keys
in various contexts, and because they are auto-generated there is no
reason to ever change them; for this reason, primary key columns are
often specified as auto-incrementing.

Auto-increment columns can be problematic with statement-based
replication, because replaying the statements on a slave might not
produce the same set of column values as on the master, due to timing
issues. When you have an auto-incrementing primary key, you can use
statement-based replication only with the setting
`innodb_autoinc_lock_mode=1'. If you have `innodb_autoinc_lock_mode=2',
which allows higher concurrency for insert operations, use *row-based
replication* rather than *statement-based replication*. The setting
`innodb_autoinc_lock_mode=0' is the previous (traditional) default
setting and should not be used except for compatibility purposes.
auto-increment locking

The convenience of an *auto-increment* primary key involves some
tradeoff with concurrency. In the simplest case, if one transaction is
inserting values into the table, any other transactions must wait to do
their own inserts into that table, so that rows inserted by the first
transaction receive consecutive primary key values. InnoDB includes
optimizations, and the `innodb_autoinc_lock_mode' option, so that you
can choose how to trade off between predictable sequences of
auto-increment values and maximum *concurrency* for insert operations.
autocommit

A setting that causes a *commit* operation after each *SQL* statement.
This mode is not recommended for working with InnoDB tables with
*transactions* that span several statements. It can help performance for
*read-only transactions* on InnoDB tables, where it minimizes overhead
from *locking* and generation of *undo* data, especially in MySQL 5.6.4
and up. It is also appropriate for working with MyISAM tables, where
transactions are not applicable.  availability

The ability to cope with, and if necessary recover from, failures on
the host, including failures of MySQL, the operating system, or the
hardware and maintenance activity that may otherwise cause downtime.
Often paired with *scalability* as critical aspects of a large-scale
deployment.

B-tree

A tree data structure that is popular for use in database indexes. The
structure is kept sorted at all times, enabling fast lookup for exact
matches (equals operator) and ranges (for example, greater than, less
than, and `BETWEEN' operators). This type of index is available for
most storage engines, such as InnoDB and MyISAM.

Because B-tree nodes can have many children, a B-tree is not the same
as a binary tree, which is limited to 2 children per node.

Contrast with *hash index*, which is only available in the MEMORY
storage engine. The MEMORY storage engine can also use B-tree indexes,
and you should choose B-tree indexes for MEMORY tables if some queries
use range operators.  backticks

Identifiers within MySQL SQL statements must be quoted using the
backtick character (``') if they contain special characters or reserved
words. For example, to refer to a table named `FOO#BAR' or a column
named `SELECT', you would specify the identifiers as ``FOO#BAR`' and
``SELECT`'.  Since the backticks provide an extra level of safety, they
are used extensively in program-generated SQL statements, where the
identifier names might not be known in advance.

Many other database systems use double quotation marks (`"') around
such special names. For portability, you can enable `ANSI_QUOTES' mode
in MySQL and use double quotation marks instead of backticks to qualify
identifier names.  backup

The process of copying some or all table data and metadata from a MySQL
instance, for safekeeping. Can also refer to the set of copied files.
This is a crucial task for DBAs. The reverse of this process is the
*restore* operation.

With MySQL, *physical backups* are performed by the *MySQL Enterprise
Backup* product, and *logical backups* are performed by the `mysqldump'
command. These techniques have different characteristics in terms of
size and representation of the backup data, and speed (especially speed
of the restore operation).

Backups are further classified as *hot*, *warm*, or *cold* depending on
how much they interfere with normal database operation. (Hot backups
have the least interference, cold backups the most.)  Barracuda

The code name for an InnoDB *file format* that supports compression for
table data. This file format was first introduced in the InnoDB Plugin.
It supports the *compressed* row format that enables InnoDB table
compression, and the *dynamic* row format that improves the storage
layout for BLOB and large text columns. You can select it through the
`innodb_file_format' option.

Because the InnoDB *system tablespace* is stored in the original
*Antelope* file format, to use the Barracuda file format you must also
enable the *file-per-table* setting, which puts newly created tables in
their own tablespaces separate from the system tablespace.

The *MySQL Enterprise Backup* product version 3.5 and above supports
backing up tablespaces that use the Barracuda file format.  beta

An early stage in the life of a software product, when it is available
only for evaluation, typically without a definite release number or a
number less than 1. InnoDB does not use the beta designation,
preferring an *early adopter* phase that can extend over several point
releases, leading to a *GA* release.  binary log

A file containing a record of all statements that attempt to change
table data. These statements can be replayed to bring slave servers up
to date in a *replication* scenario, or to bring a database up to date
after restoring table data from a backup. The binary logging feature
can be turned on and off, although Oracle recommends always enabling it
if you use replication or perform backups.

You can examine the contents of the binary log, or replay those
statements during replication or recovery, by using the *Note
`mysqlbinlog': mysqlbinlog. command. For full information about the
binary log, see *Note binary-log::. For MySQL configuration options
related to the binary log, see *Note replication-options-binary-log::.

For the *MySQL Enterprise Backup* product, the file name of the binary
log and the current position within the file are important details. To
record this information for the master server when taking a backup in a
replication context, you can specify the `--slave-info' option.

Prior to MySQL 5.0, a similar capability was available, known as the
update log. In MySQL 5.0 and higher, the binary log replaces the update
log.  binlog

An informal name for the *binary log* file. For example, you might see
this abbreviation used in e-mail messages or forum discussions.  blind
query expansion

A special mode of *full-text search* enabled by the `WITH QUERY
EXPANSION' clause. It performs the search twice, where the search
phrase for the second search is the original search phrase concatenated
with the few most highly relevant documents from the first search. This
technique is mainly applicable for short search phrases, perhaps only a
single word. It can uncover relevant matches where the precise search
term does not occur in the document.  bottleneck

A portion of a system that is constrained in size or capacity, that has
the effect of limiting overall throughput. For example, a memory area
might be smaller than necessary; access to a single required resource
might prevent multiple CPU cores from running simultaneously; or
waiting for disk I/O to complete might prevent the CPU from running at
full capacity. Removing bottlenecks tends to improve *concurrency*. For
example, the ability to have multiple InnoDB *buffer pool* instances
reduces contention when multiple sessions read from and write to the
buffer pool simultaneously.  bounce

A *shutdown* operation immediately followed by a restart. Ideally with
a relatively short *warmup* period so that performance and throughput
quickly return to a high level.  buddy allocator

A mechanism for managing different-sized *pages* in the InnoDB *buffer
pool*.  buffer

A memory or disk area used for temporary storage. Data is buffered in
memory so that it can be written to disk efficiently, with a few large
I/O operations rather than many small ones. Data is buffered on disk
for greater reliability, so that it can be recovered even when a
*crash* or other failure occurs at the worst possible time. The main
types of buffers used by InnoDB are the *buffer pool*, the *doublewrite
buffer*, and the *insert buffer*.  buffer pool

The memory area that holds cached InnoDB data for both tables and
indexes. For efficiency of high-volume read operations, the buffer pool
is divided into *pages* that can potentially hold multiple rows. For
efficiency of cache management, the buffer pool is implemented as a
linked list of pages; data that is rarely used is aged out of the
cache, using a variation of the *LRU* algorithm. On systems with large
memory, you can improve concurrency by dividing the buffer pool into
multiple *buffer pool instances*.

Several `InnoDB' status variables, `information_schema' tables, and
`performance_schema' tables help to monitor the internal workings of
the buffer pool. Starting in MySQL 5.6, you can also dump and restore
the contents of the buffer pool, either automatically during shutdown
and restart, or manually at any time, through a set of `InnoDB'
configuration variables such as `innodb_buffer_pool_dump_at_shutdown'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_buffer_pool_dump_at_shutdown)
and `innodb_buffer_pool_load_at_startup'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_buffer_pool_load_at_startup).
buffer pool instance

Any of the multiple regions into which the *buffer pool* can be divided,
controlled by the `innodb_buffer_pool_instances' configuration option.
The total memory size specified by the `innodb_buffer_pool_size' is
divided among all the instances. Typically, multiple buffer pool
instances are appropriate for systems devoting multiple gigabytes to
the InnoDB buffer pool, with each instance 1 gigabyte or larger. On
systems loading or looking up large amounts of data in the buffer pool
from many concurrent sessions, having multiple instances reduces the
contention for exclusive access to the data structures that manage the
buffer pool.  built-in

The built-in InnoDB storage engine within MySQL is the original form of
distribution for the storage engine. Contrast with the *InnoDB Plugin*.
Starting with MySQL 5.5, the InnoDB Plugin is merged back into the
MySQL code base as the built-in InnoDB storage engine (known as InnoDB
1.1).

This distinction is important mainly in MySQL 5.1, where a feature or
bug fix might apply to the InnoDB Plugin but not the built-in InnoDB,
or vice versa.  business rules

The relationships and sequences of actions that form the basis of
business software, used to run a commercial company.  Sometimes these
rules are dictated by law, other times by company policy. Careful
planning ensures that the relationships encoded and enforced by the
database, and the actions performed through application logic,
accurately reflect the real policies of the company and can handle
real-life situations.

For example, an employee leaving a company might trigger a sequence of
actions from the human resources department. The human resources
database might also need the flexibility to represent data about a
person who has been hired, but not yet started work. Closing an account
at an online service might result in data being removed from a
database, or the data might be moved or flagged so that it could be
recovered if the account is re-opened. A company might establish
policies regarding salary maximums, minimums, and adjustments, in
addition to basic sanity checks such as the salary not being a negative
number. A retail database might not allow a purchase with the same
serial number to be returned more than once, or might not allow credit
card purchases above a certain value, while a database used to detect
fraud might allow these kinds of things.

cache

The general term for any memory area that stores copies of data for
frequent or high-speed retrieval. In InnoDB, the primary kind of cache
structure is the *buffer pool*.  cardinality

The number of different values in a table *column*. When queries refer
to columns that have an associated *index*, the cardinality of each
column influences which access method is most efficient. For example,
for a column with a *unique constraint*, the number of different values
is equal to the number of rows in the table. If a table has a million
rows but only 10 different values for a particular column, each value
occurs (on average) 100,000 times. A query such as `SELECT c1 FROM t1
WHERE c1 = 50;' thus might return 1 row or a huge number of rows, and
the database server might process the query differently depending on
the cardinality of `c1'.

If the values in a column have a very uneven distribution, the
cardinality might not be a good way to determine the best query plan.
For example, `SELECT c1 FROM t1 WHERE c1 = x;' might return 1 row when
`x=50' and a million rows when `x=30'. In such a case, you might need
to use *index hints* to pass along advice about which lookup method is
more efficient for a particular query.

Cardinality can also apply to the number of distinct values present in
multiple columns, as in a *composite index*.

For InnoDB, the process of estimating cardinality for indexes is
influenced by the `innodb_stats_sample_pages' and the
`innodb_stats_on_metadata' configuration options. The estimated values
are more stable when the *persistent statistics* feature is enabled (in
MySQL 5.6 and higher).  .cfg file

A metadata file used with the `InnoDB' *transportable tablespace*
feature. It is produced by the command `FLUSH TABLES ...  FOR EXPORT',
puts one or more tables in a consistent state that can be copied to
another server. The `.cfg' file is copied along with the corresponding
*.ibd file*, and used to adjust the internal values of the `.ibd' file,
such as the *space ID*, during the `ALTER TABLE ... IMPORT TABLESPACE'
step.  change buffer

A special data structure that records changes to *pages* in *secondary
indexes*. These values could result from SQL *Note `INSERT': insert,
*Note `UPDATE': update, or *Note `DELETE': delete. statements (*DML*).
The set of features involving the change buffer is known collectively as
*change buffering*, consisting of *insert buffering*, *delete
buffering*, and *purge buffering*.

Changes are only recorded in the change buffer when the relevant page
from the secondary index is not in the *buffer pool*. When the relevant
index page is brought into the buffer pool while associated changes are
still in the change buffer, the changes for that page are applied in
the buffer pool (*merged*) using the data from the change buffer.
Periodically, the *purge* operation that runs during times when the
system is mostly idle, or during a slow shutdown, writes the new index
pages to disk. The purge operation can write the disk blocks for a
series of index values more efficiently than if each value were written
to disk immediately.

Physically, the change buffer is part of the *system tablespace*, so
that the index changes remain buffered across database restarts. The
changes are only applied (*merged*) when the pages are brought into the
buffer pool due to some other read operation.

The kinds and amount of data stored in the change buffer are governed
by the `innodb_change_buffering' and `innodb_change_buffer_max_size'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_change_buffer_max_size)
configuration options. To see information about the current data in the
change buffer, issue the *Note `SHOW ENGINE INNODB STATUS':
show-engine. command.

Formerly known as the *insert buffer*.  change buffering

The general term for the features involving the *change buffer*,
consisting of *insert buffering*, *delete buffering*, and *purge
buffering*. Index changes resulting from SQL statements, which could
normally involve random I/O operations, are held back and performed
periodically by a background *thread*. This sequence of operations can
write the disk blocks for a series of index values more efficiently
than if each value were written to disk immediately. Controlled by the
`innodb_change_buffering' and `innodb_change_buffer_max_size'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_change_buffer_max_size)
configuration options.  checkpoint

As changes are made to data pages that are cached in the *buffer pool*,
those changes are written to the *data files* sometime later, a process
known as *flushing*. The checkpoint is a record of the latest changes
(represented by an *LSN* value) that have been successfully written to
the data files.  checksum

In `InnoDB', a validation mechanism to detect corruption when a *page*
in a *tablespace* is read from disk into the InnoDB *buffer pool*.
This feature is turned on and off by the `innodb_checksums'
configuration option. In MySQL 5.6, you can enable a faster checksum
algorithm by also specifying the configuration option
`innodb_checksum_algorithm=crc32'.

The *Note `innochecksum': innochecksum. command helps to diagnose
corruption problems by testing the checksum values for a specified
*tablespace* file while the MySQL server is shut down.

MySQL also uses checksums for replication purposes. For details, see
the configuration options `binlog_checksum'
(http://dev.mysql.com/doc/refman/5.6/en/replication-options-binary-log.html#sysvar_binlog_checksum),
`master_verify_checksum'
(http://dev.mysql.com/doc/refman/5.6/en/replication-options-binary-log.html#sysvar_master_verify_checksum),
and `slave_sql_verify_checksum'
(http://dev.mysql.com/doc/refman/5.6/en/replication-options-slave.html#sysvar_slave_sql_verify_checksum).
child table

In a *foreign key* relationship, a child table is one whose rows refer
(or point) to rows in another table with an identical value for a
specific column.  This is the table that contains the `FOREIGN KEY ...
REFERENCES' clause and optionally `ON UPDATE' and `ON DELETE' clauses.
The corresponding row in the *parent table* must exist before the row
can be created in the child table. The values in the child table can
prevent delete or update operations on the parent table, or can cause
automatic deletion or updates in the child table, based on the `ON
CASCADE' option used when creating the foreign key.  clean page

A *page* in the InnoDB *buffer pool* where all changes made in memory
have also been written (*flushed*) to the data files. The opposite of a
*dirty page*.  clean shutdown

A *shutdown* that completes without errors and applies all changes to
InnoDB tables before finishing, as opposed to a *crash* or a *fast
shutdown*. Synonym for *slow shutdown*.  client

A type of program that sends requests to a server, and interprets or
processes the results. The client software might run only some of the
time (such as a mail or chat program), and might run interactively
(such as the `mysql' command processor).  clustered index

The InnoDB term for a *primary key* index. InnoDB table storage is
organized based on the values of the primary key columns, to speed up
queries and sorts involving the primary key columns. For best
performance, choose the primary key columns carefully based on the most
performance-critical queries. Because modifying the columns of the
clustered index is an expensive operation, choose primary columns that
are rarely or never updated.

In the Oracle Database product, this type of table is known as an
*index-organized table*.  cold backup

A *backup* taken while the database is shut down. For busy applications
and web sites, this might not be practical, and you might prefer a
*warm backup* or a *hot backup*.  column

A data item within a *row*, whose storage and semantics are defined by
a data type. Each *table* and *index* is largely defined by the set of
columns it contains.

Each column has a *cardinality* value. A column can be the *primary
key* for its table, or part of the primary key. A column can be subject
to a *unique constraint*, a *NOT NULL constraint*, or both. Values in
different columns, even across different tables, can be linked by a
*foreign key* relationship.

In discussions of MySQL internal operations, sometimes *field* is used
as a synonym.  column index

An *index* on a single column.  column prefix

When an index is created with a length specification, such as `CREATE
INDEX idx ON t1 (c1(N))', only the first N characters of the column
value are stored in the index.  Keeping the index prefix small makes
the index compact, and the memory and disk I/O savings help
performance. (Although making the index prefix too small can hinder
query optimization by making rows with different values appear to the
query optimizer to be duplicates.)

For columns containing binary values or long text strings, where
sorting is not a major consideration and storing the entire value in
the index would waste space, the index automatically uses the first N
(typically 768) characters of the value to do lookups and sorts.  commit

A *SQL* statement that ends a *transaction*, making permanent any
changes made by the transaction. It is the opposite of *rollback*,
which undoes any changes made in the transaction.

InnoDB uses an *optimistic* mechanism for commits, so that changes can
be written to the data files before the commit actually occurs. This
technique makes the commit itself faster, with the tradeoff that more
work is required in case of a rollback.

By default, MySQL uses the *autocommit* setting, which automatically
issues a commit following each SQL statement.  compact row format

The default InnoDB *row format* since MySQL 5.0.3. Available for tables
that use the *Antelope* *file format*. It has a more compact
representation for nulls and variable-length fields than the prior
default (*redundant row format*).

Because of the *B-tree* indexes that make row lookups so fast in
InnoDB, there is little if any performance benefit to keeping all rows
the same size.  composite index

An *index* that includes multiple columns.  compressed backup

The compression feature of the *MySQL Enterprise Backup* product makes
a compressed copy of each tablespace, changing the extension from
`.ibd' to `.ibz'. Compressing the backup data allows you to keep more
backups on hand, and reduces the time to transfer backups to a
different server. The data is uncompressed during the restore
operation. When a compressed backup operation processes a table that is
already compressed, it skips the compression step for that table,
because compressing again would result in little or no space savings.

A set of files produced by the *MySQL Enterprise Backup* product, where
each *tablespace* is compressed. The compressed files are renamed with
a `.ibz' file extension.

Applying *compression* right at the start of the backup process helps
to avoid storage overhead during the compression process, and to avoid
network overhead when transferring the backup files to another server.
The process of *applying* the *binary log* takes longer, and requires
uncompressing the backup files.  compressed row format

A *row format* that enables data and index *compression* for InnoDB
tables. It was introduced in the InnoDB Plugin, available as part of
the *Barracuda* file format. Large fields are stored away from the page
that holds the rest of the row data, as in *dynamic row format*. Both
index pages and the large fields are compressed, yielding memory and
disk savings. Depending on the structure of the data, the decrease in
memory and disk usage might or might not outweigh the performance
overhead of uncompressing the data as it is used. See *Note
innodb-compression:: for usage details.  compression

A feature with wide-ranging benefits from using less disk space,
performing less I/O, and using less memory for caching. InnoDB table
and index data can be kept in a compressed format during database
operation.

The data is uncompressed when needed for queries, and re-compressed
when changes are made by *DML* operations. After you enable compression
for a table, this processing is transparent to users and application
developers. DBAs can consult *information_schema* tables to monitor how
efficiently the compression parameters work for the MySQL instance and
for particular compressed tables.

When InnoDB table data is compressed, the compression applies to the
*table* itself, any associated *index* data, and the pages loaded into
the *buffer pool*. Compression does not apply to pages in the *undo
buffer*.

The table compression feature requires using MySQL 5.5 or higher, or
the InnoDB Plugin in MySQL 5.1 or earlier, and creating the table using
the *Barracuda* file format and *compressed row format*, with the
*innodb_file_per_table* setting turned on. The compression for each
table is influenced by the `KEY_BLOCK_SIZE' clause of the *Note `CREATE
TABLE': create-table. and *Note `ALTER TABLE': alter-table. statements.
In MySQL 5.6 and higher, compression is also affected by the server-wide
configuration options `innodb_compression_failure_threshold_pct'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_compression_failure_threshold_pct),
`innodb_compression_level'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_compression_level),
and `innodb_compression_pad_pct_max'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_compression_pad_pct_max).
See *Note innodb-compression:: for usage details.

Another type of compression is the *compressed backup* feature of the
*MySQL Enterprise Backup* product.  compression failure

Not actually an error, rather an expensive operation that can occur
when using *compression* in combination with *DML* operations. It
occurs when: updates to a compressed *page* overflow the area on the
page reserved for recording modifications; the page is compressed
again, with all changes applied to the table data; the re-compressed
data does not fit on the original page, requiring MySQL to split the
data into two new pages and compress each one separately. To check the
frequency of this condition, query the table *Note
`INFORMATION_SCHEMA.INNODB_CMP': innodb-cmp-table. and check how much
the value of the `COMPRESS_OPS' column exceeds the value of the
`COMPRESS_OPS_OK' column. Ideally, compression failures do not occur
often; when they do, you can adjust the configuration options
`innodb_compression_level'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_compression_level),
`innodb_compression_failure_threshold_pct'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_compression_failure_threshold_pct),
and `innodb_compression_pad_pct_max'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_compression_pad_pct_max).
concatenated indexconcurrency

The ability of multiple operations (in database terminology,
*transactions*) to run simultaneously, without interfering with each
other. Concurrency is also involved with performance, because ideally
the protection for multiple simultaneous transactions works with a
minimum of performance overhead, using efficient mechanisms for
*locking*.  configuration file

The file that holds the *option* values used by MySQL at startup.
Traditionally, on Linux and UNIX this file is named `my.cnf', and on
Windows it is named `my.ini'. You can set a number of options related
to InnoDB under the `[mysqld]' section of the file.

Typically, this file is searched for in the locations `/etc/my.cnf'
`/etc/mysql/my.cnf' `/usr/local/mysql/etc/my.cnf' and `~/.my.cnf'. See
*Note option-files:: for details about the search path for this file.

When you use the *MySQL Enterprise Backup* product, you typically use
two configuration files: one that specifies where the data comes from
and how it is structured (which could be the original configuration file
for your real server), and a stripped-down one containing only a small
set of options that specify where the backup data goes and how it is
structured. The configuration files used with the *MySQL Enterprise
Backup* product must contain certain options that are typically left
out of regular configuration files, so you might need to add some
options to your existing configuration file for use with *MySQL
Enterprise Backup*.  consistent read

A read operation that uses snapshot information to present query
results based on a point in time, regardless of changes performed by
other transactions running at the same time. If queried data has been
changed by another transaction, the original data is reconstructed
based on the contents of the *undo log*. This technique avoids some of
the *locking* issues that can reduce *concurrency* by forcing
transactions to wait for other transactions to finish.

With the *repeatable read* isolation level, the snapshot is based on
the time when the first read operation is performed. With the *read
committed* isolation level, the snapshot is reset to the time of each
consistent read operation.

Consistent read is the default mode in which InnoDB processes `SELECT'
statements in *READ COMMITTED* and *REPEATABLE READ* isolation levels.
Because a consistent read does not set any locks on the tables it
accesses, other sessions are free to modify those tables while a
consistent read is being performed on the table.

For technical details about the applicable isolation levels, see *Note
innodb-consistent-read::.  constraint

An automatic test that can block database changes to prevent data from
becoming inconsistent. (In computer science terms, a kind of assertion
related to an invariant condition.)  Constraints are a crucial
component of the *ACID* philosophy, to maintain data consistency.
Constraints supported by MySQL include *FOREIGN KEY constraints* and
*unique constraints*.  counter

A value that is incremented by a particular kind of `InnoDB' operation.
Useful for measuring how busy a server is, troubleshooting the sources
of performance issues, and testing whether changes (for example, to
configuration settings or indexes used by queries) have the desired
low-level effects. Different kinds of counters are available through
*performance_schema* tables and *information_schema* tables,
particularly `information_schema.innodb_metrics'.  covering index

An *index* that includes all the columns retrieved by a query. Instead
of using the index values as pointers to find the full table rows, the
query returns values from the index structure, saving disk I/O. InnoDB
can apply this optimization technique to more indexes than MyISAM can,
because InnoDB *secondary indexes* also include the primary key
columns. InnoDB cannot apply this technique for queries against tables
modified by a transaction, until that transaction ends.

Any *column index* or *composite index* could act as a covering index,
given the right query. Design your indexes and queries to take
advantage of this optimization technique wherever possible.  crash

MySQL uses the term "crash" to refer generally to any unexpected
shutdown operation where the server cannot do its normal cleanup. For
example, a crash could happen due to a hardware fault on the database
server machine or storage device; a power failure; a potential data
mismatch that causes the MySQL server to halt; a *fast shutdown*
initiated by the DBA; or many other reasons. The robust, automatic
*crash recovery* for *InnoDB* tables ensures that data is made
consistent when the server is restarted, without any extra work for the
DBA.  crash recovery

The cleanup activities that occur when MySQL is started again after a
*crash*. For *InnoDB* tables, changes from incomplete transactions are
replayed using data from the *redo log*. Changes that were *committed*
before the crash, but not yet written into the data files, are
reconstructed from the *doublewrite buffer*. When the database is shut
down normally, this type of activity is performed during shutdown by the
*purge* operation.

During normal operation, committed data can be stored in the *change
buffer* for a period of time before being written to the data files.
There is always a tradeoff between keeping the data files up-to-date,
which introduces performance overhead during normal operation, and
buffering the data, which can make shutdown and crash recovery take
longer.  CRUD

Acronym for "create, read, update, delete", a common sequence of
operations in database applications. Often denotes a class of
applications with relatively simple database usage (basic *DDL*, *DML*
and *query* statements in *SQL*) that can be implemented quickly in any
language.  cursor

An internal data structure that is used to represent the result set of
a *query*, or other operation that performs a search using an SQL
`WHERE' clause. It works like an iterator in other high-level
languages, producing each value from the result set as requested.

Although usually SQL handles the processing of cursors for you, you
might delve into the inner workings when dealing with
performance-critical code.

data definition languagedata dictionary

Metadata that keeps track of InnoDB-related objects such as *tables*,
*indexes*, and table *columns*. This metadata is physically located in
the InnoDB *system tablespace*. For historical reasons, it overlaps to
some degree with information stored in the *.frm files*.

Because the *MySQL Enterprise Backup* product always backs up the
system tablespace, all backups include the contents of the data
dictionary.  data directory

The directory under which each MySQL *instance* keeps the *data files*
for InnoDB and the directories representing individual databases.
Controlled by the `datadir' configuration option.  data files

The files that physically contain the InnoDB *table* and *index* data.
There can be a one-to-many relationship between data files and tables,
as in the case of the *system tablespace*, which can hold multiple
InnoDB tables as well as the *data dictionary*.  There can also be a
one-to-one relationship between data files and tables, as when the
*file-per-table* setting is enabled, causing each newly created table
to be stored in a separate *tablespace*.  data manipulation
languagedata warehouse

A database system or application that primarily runs large *queries*.
The read-only or read-mostly data might be organized in *denormalized*
form for query efficiency. Can benefit from the optimizations for
*read-only transactions* in MySQL 5.6 and higher. Contrast with *OLTP*.
database

Within the MySQL *data directory*, each database is represented by a
separate directory. The InnoDB *system tablespace*, which can hold
table data from multiple databases within a MySQL *instance*, is kept
in its *data files* that reside outside the individual database
directories. When *file-per-table* mode is enabled, the *.ibd files*
representing individual InnoDB tables are stored inside the database
directories.

For long-time MySQL users, a database is a familiar notion.  Users
coming from an Oracle Database background will find that the MySQL
meaning of a database is closer to what Oracle Database calls a
*schema*.  DCL

Data control language, a set of *SQL* statements for managing
privileges. In MySQL, consists of the *Note `GRANT': grant. and *Note
`REVOKE': revoke. statements. Contrast with *DDL* and *DML*.  DDL

Data definition language, a set of *SQL* statements for manipulating
the database itself rather than individual table rows. Includes all
forms of the `CREATE', `ALTER', and `DROP' statements. Also includes
the `TRUNCATE' statement, because it works differently than a `DELETE
FROM TABLE_NAME' statement, even though the ultimate effect is similar.

DDL statements automatically *commit* the current *transaction*; they
cannot be *rolled back*.

The InnoDB-related aspects of DDL include speed improvements for *Note
`CREATE INDEX': create-index. and *Note `DROP INDEX': drop-index.
statements, and the way the *file-per-table* setting affects the
behavior of the *Note `TRUNCATE TABLE': truncate-table. statement.

Contrast with *DML* and *DCL*.  deadlock

A situation where different *transactions* are unable to proceed,
because each holds a *lock* that the other needs.  Because both
transactions are waiting for a resource to become available, neither
will ever release the locks it holds.

A deadlock can occur when the transactions lock rows in multiple tables
(through statements such as `UPDATE' or `SELECT ... FOR UPDATE'), but
in the opposite order. A deadlock can also occur when such statements
lock ranges of index records and *gaps*, with each transaction
acquiring some locks but not others due to a timing issue.

To reduce the possibility of deadlocks, use transactions rather than
`LOCK TABLE' statements; keep transactions that insert or update data
small enough that they do not stay open for long periods of time; when
different transactions update multiple tables or large ranges of rows,
use the same order of operations (such as `SELECT ... FOR UPDATE') in
each transaction; create indexes on the columns used in `SELECT ... FOR
UPDATE' and `UPDATE ... WHERE' statements. The possibility of deadlocks
is not affected by the *isolation level*, because the isolation level
changes the behavior of read operations, while deadlocks occur because
of write operations.

If a deadlock does occur, InnoDB detects the condition and *rolls back*
one of the transactions (the *victim*).  Thus, even if your application
logic is perfectly correct, you must still handle the case where a
transaction must be retried.  To see the last deadlock in an InnoDB
user transaction, use the command `SHOW ENGINE INNODB STATUS'. If
frequent deadlocks highlight a problem with transaction structure or
application error handling, run with the `innodb_print_all_deadlocks'
setting enabled to print information about all deadlocks to the
`mysqld' error log.

For background information on how deadlocks are automatically detected
and handled, see *Note innodb-deadlock-detection::. For tips on
avoiding and recovering from deadlock conditions, see *Note
innodb-deadlocks::.  deadlock detection

A mechanism that automatically detects when a *deadlock* occurs, and
automatically *rolls back* one of the *transactions* involved (the
*victim*).  delete

When InnoDB processes a `DELETE' statement, the rows are immediately
marked for deletion and no longer are returned by queries. The storage
is reclaimed sometime later, during the periodic garbage collection
known as the *purge* operation, performed by a separate thread. For
removing large quantities of data, related operations with their own
performance characteristics are *truncate* and *drop*.  delete buffering

The technique of storing index changes due to `DELETE' operations in the
*insert buffer* rather than writing them immediately, so that the
physical writes can be performed to minimize random I/O. (Because
delete operations are a two-step process, this operation buffers the
write that normally marks an index record for deletion.) It is one of
the types of *change buffering*; the others are *insert buffering* and
*purge buffering*.  denormalized

A data storage strategy that duplicates data across different tables,
rather than linking the tables with *foreign keys* and *join* queries.
Typically used in *data warehouse* applications, where the data is not
updated after loading. In such applications, query performance is more
important than making it simple to maintain consistent data during
updates. Contrast with *normalized*.  descending index

A type of index available with some database systems, where index
storage is optimized to process `ORDER BY COLUMN DESC' clauses.
Currently, although MySQL allows the `DESC' keyword in the *Note
`CREATE TABLE': create-table.  statement, it does not use any special
storage layout for the resulting index.  dirty page

A *page* in the InnoDB *buffer pool* that has been updated in memory,
where the changes are not yet written (*flushed*) to the data files.
The opposite of a *clean page*.  dirty read

An operation that retrieves unreliable data, data that was updated by
another transaction but not yet *committed*. It is only possible with
the *isolation level* known as *read uncommitted*.

This kind of operation does not adhere to the *ACID* principle of
database design. It is considered very risky, because the data could be
*rolled back*, or updated further before being committed; then, the
transaction doing the dirty read would be using data that was never
confirmed as accurate.

Its polar opposite is *consistent read*, where InnoDB goes to great
lengths to ensure that a transaction does not read information updated
by another transaction, even if the other transaction commits in the
meantime.  disk-based

A kind of database that primarily organizes data on disk storage (hard
drives or equivalent). Data is brought back and forth between disk and
memory to be operated upon. It is the opposite of an *in-memory
database*.  Although InnoDB is disk-based, it also contains features
such as *the buffer* pool, multiple buffer pool instances, and the
*adaptive hash index* that allow certain kinds of workloads to work
primarily from memory.  disk-bound

A type of *workload* where the primary *bottleneck* is CPU operations
in memory. Typically involves read-intensive operations where the
results can all be cached in the *buffer pool*.  disk-bound

A type of *workload* where the primary *bottleneck* is disk I/O.  (Also
known as *I/O-bound*.)  Typically involves frequent writes to disk, or
random reads of more data than can fit into the *buffer pool*.  DML

Data manipulation language, a set of *SQL* statements for performing
insert, update, and delete operations. The *Note `SELECT': select.
statement is sometimes considered as a DML statement, because the
`SELECT ...  FOR UPDATE' form is subject to the same considerations for
*locking* as *Note `INSERT': insert, *Note `UPDATE': update, and *Note
`DELETE': delete.

DML statements for an InnoDB table operate in the context of a
*transaction*, so their effects can be *committed* or *rolled back* as
a single unit.

Contrast with *DDL* and *DCL*.  document id

In the InnoDB *full-text search* feature, a special column in the table
containing the *FULLTEXT index*, to uniquely identify the document
associated with each *ilist* value. Its name is `FTS_DOC_ID' (uppercase
required). The column itself must be of `BIGINT UNSIGNED NOT NULL'
type, with a unique index named `FTS_DOC_ID_INDEX'. Preferably, you
define this column when creating the table. If InnoDB must add the
column to the table while creating a `FULLTEXT' index, the indexing
operation is considerably more expensive.  doublewrite buffer

InnoDB uses a novel file flush technique called doublewrite.  Before
writing *pages* to the *data files*, InnoDB first writes them to a
contiguous area called the doublewrite buffer. Only after the write and
the flush to the doublewrite buffer have completed, does InnoDB write
the pages to their proper positions in the data file. If the operating
system crashes in the middle of a page write, InnoDB can later find a
good copy of the page from the doublewrite buffer during *crash
recovery*.

Although data is always written twice, the doublewrite buffer does not
require twice as much I/O overhead or twice as many I/O operations.
Data is written to the buffer itself as a large sequential chunk, with
a single `fsync()' call to the operating system.

To turn off the doublewrite buffer, specify the option
`innodb_doublewrite=0'.  drop

A kind of *DDL* operation that removes a schema object, through a
statement such as *Note `DROP TABLE': drop-table. or *Note `DROP
INDEX': drop-index. It maps internally to an *Note `ALTER TABLE':
alter-table. statement. From an InnoDB perspective, the performance
considerations of such operations involve the time that the *data
dictionary* is locked to ensure that interrelated objects are all
updated, and the time to update memory structures such as the *buffer
pool*. For a *table*, the drop operation has somewhat different
characteristics than a *truncate* operation (*Note `TRUNCATE TABLE':
truncate-table. statement).  dynamic row format

A row format introduced in the InnoDB Plugin, available as part of the
*Barracuda* *file format*. Because `TEXT' and `BLOB' fields are stored
outside of the rest of the page that holds the row data, it is very
efficient for rows that include large objects. Since the large fields
are typically not accessed to evaluate query conditions, they are not
brought into the *buffer pool* as often, resulting in fewer I/O
operations and better utilization of cache memory.

early adopter

A stage similar to beta, when a software product is typically evaluated
for performance, functionality, and compatibility in a
non-mission-critical setting. InnoDB uses the *early adopter*
designation rather than *beta*, through a succession of point releases
leading up to a *GA* release.  error log

A type of *log* showing information about MySQL startup and critical
runtime errors and *crash* information. For details, see *Note
error-log::.  eviction

The process of removing an item from a cache or other temporary storage
area, such as the InnoDB *buffer pool*. Often, but not always, uses the
*LRU* algorithm to determine which item to remove. When a *dirty page*
is evicted, its contents are *flushed* to disk, and any *dirty
neighbor* pages might be flushed also.  exclusive lock

A kind of *lock* that prevents any other *transaction* from locking the
same row. Depending on the transaction *isolation level*, this kind of
lock might block other transactions from writing to the same row, or
might also block other transactions from reading the same row. The
default InnoDB isolation level, *REPEATABLE READ*, enables higher
*concurrency* by allowing transactions to read rows that have exclusive
locks, a technique known as *consistent read*.  extent

A group of *pages* within a *tablespace* totaling 1 megabyte.  With the
default *page size* of 16KB, an extent contains 64 pages. In MySQL 5.6,
the page size can also be 4KB or 8KB, in which case an extent contains
more pages, still adding up to 1MB.

InnoDB features such as *segments*, *read-ahead* requests and the
*doublewrite buffer* use I/O operations that read, write, allocate, or
free data one extent at a time.

Fast Index Creation

A capability first introduced in the InnoDB Plugin, now part of the
MySQL server in 5.5 and higher, that speeds up creation of InnoDB
*secondary indexes* by avoiding the need to completely rewrite the
associated table.  The speedup applies to dropping secondary indexes
also.

Because index maintenance can add performance overhead to many data
transfer operations, consider doing operations such as `ALTER TABLE ...
ENGINE=INNODB' or `INSERT INTO ... SELECT * FROM ...' without any
secondary indexes in place, and creating the indexes afterward.

In MySQL 5.6, this feature becomes more general: you can read and write
to tables while an index is being created, and many more kinds of *Note
`ALTER TABLE': alter-table.  operations can be performed without
copying the table, without blocking *DML* operations, or both. Thus in
MySQL 5.6 and higher, we typically refer to this set of features as
*online DDL* rather than Fast Index Creation.  fast shutdown

The default *shutdown* procedure for InnoDB, based on the configuration
setting `innodb_fast_shutdown=1'. To save time, certain *flush*
operations are skipped. This type of shutdown is safe during normal
usage, because the flush operations are performed during the next
startup, using the same mechanism as in *crash recovery*. In cases where
the database is being shut down for an upgrade or downgrade, do a *slow
shutdown* instead to ensure that all relevant changes are applied to the
*data files* during the shutdown.  file format

The format used by InnoDB for each table, typically with the
*file-per-table* setting enabled so that each table is stored in a
separate *`.ibd' file*.  Currently, the file formats available in
InnoDB are known as *Antelope* and *Barracuda*. Each file format
supports one or more *row formats*. The row formats available for
Barracuda tables, *COMPRESSED* and *DYNAMIC*, enable important new
storage features for InnoDB tables.  file-per-table

A general name for the setting controlled by the
`innodb_file_per_table' option.  That is a very important configuration
option that affects many aspects of InnoDB file storage, availability
of features, and I/O characteristics. In MySQL 5.6.7 and higher, it is
enabled by default. Prior to MySQL 5.6.7, it is disabled by default.

For each table created while this setting is in effect, the data is
stored in a separate *.ibd file* rather than in the *ibdata files* of
the *system tablespace*. When table data is stored in individual files,
you have more flexibility to choose nondefault *file formats* and *row
formats*, which are required for features such as data *compression*.
The `TRUNCATE TABLE' operation is also much faster, and the reclaimed
space can be used by the operating system rather than remaining
reserved for InnoDB.

The *MySQL Enterprise Backup* product is more flexible for tables that
are in their own files.  For example, tables can be excluded from a
backup, but only if they are in separate files. Thus, this setting is
suitable for tables that are backed up less frequently or on a different
schedule.  fill factor

In an InnoDB *index*, the proportion of a *page* that is taken up by
index data before the page is split. The unused space when index data
is first divided between pages allows for rows to be updated with
longer string values without requiring expensive index maintenance
operations. If the fill factor is too low, the index consumes more
space than needed, causing extra I/O overhead when reading the index.
If the fill factor is too high, any update that increases the length of
column values can cause extra I/O overhead for index maintenance. See
*Note innodb-physical-structure:: for more information.  fixed row
format

This row format is used by the MyISAM storage engine, not by InnoDB. If
you create an InnoDB table with the option `row_format=fixed', InnoDB
translates this option to use the *compact row format* instead,
although the `fixed' value might still show up in output such as `SHOW
TABLE STATUS' reports.  flush

To write changes to the database files, that had been buffered in a
memory area or a temporary disk storage area. The InnoDB storage
structures that are periodically flushed include the *redo log*, the
*undo log*, and the *buffer pool*.

Flushing can happen because a memory area becomes full and the system
needs to free some space, because a *commit* operation means the
changes from a transaction can be finalized, or because a *slow
shutdown* operation means that all outstanding work should be
finalized. When it is not critical to flush all the buffered data at
once, `InnoDB' can use a technique called *fuzzy checkpointing* to flush
small batches of pages to spread out the I/O overhead.  flush list

An internal InnoDB data structure that tracks *dirty pages* in the
*buffer pool*: that is, *pages* that have been changed and need to be
written back out to disk. This data structure is updated frequently by
InnoDB's internal *mini-transactions*, and so is protected by its own
*mutex* to allow concurrent access to the buffer pool.  foreign key

A type of pointer relationship, between rows in separate InnoDB tables.
The foreign key relationship is defined on one column in both the
*parent table* and the *child table*.

In addition to enabling fast lookup of related information, foreign
keys help to enforce *referential integrity*, by preventing any of
these pointers from becoming invalid as data is inserted, updated, and
deleted. This enforcement mechanism is a type of *constraint*. A row
that points to another table cannot be inserted if the associated
foreign key value does not exist in the other table. If a row is deleted
or its foreign key value changed, and rows in another table point to
that foreign key value, the foreign key can be set up to prevent the
deletion, cause the corresponding column values in the other table to
become *null*, or automatically delete the corresponding rows in the
other table.

One of the stages in designing a *normalized* database is to identify
data that is duplicated, separate that data into a new table, and set
up a foreign key relationship so that the multiple tables can be
queried like a single table, using a *join* operation.  FOREIGN KEY
constraint

The type of *constraint* that maintains database consistency through a
*foreign key* relationship. Like other kinds of constraints, it can
prevent data from being inserted or updated if data would become
inconsistent; in this case, the inconsistency being prevented is
between data in multiple tables. Alternatively, when a *DML* operation
is performed, `FOREIGN KEY' constraints can cause data in *child rows*
to be deleted, changed to different values, or set to *null*, based on
the `ON CASCADE' option specified when creating the foreign key.  .frm
file

A file containing the metadata, such as the table definition, of a
MySQL table.

For backups, you must always keep the full set of `.frm' files along
with the backup data to be able to restore tables that are altered or
dropped after the backup.

Although each InnoDB table has a `.frm' file, InnoDB maintains its own
table metadata in the system tablespace; the `.frm' files are not
needed for InnoDB to operate on InnoDB tables.

These files are backed up by the *MySQL Enterprise Backup* product.
These files must not be modified by an `ALTER TABLE' operation while
the backup is taking place, which is why backups that include
non-InnoDB tables perform a `FLUSH TABLES WITH READ LOCK' operation to
freeze such activity while backing up the `.frm' files. Restoring a
backup can result in `.frm' files being created, changed, or removed to
match the state of the database at the time of the backup.  FTS

In most contexts, an acronym for *full-text search*. Sometimes in
performance discussions, an acronym for *full table scan*.  full backup

A *backup* that includes all the *tables* in each MySQL *database*, and
all the databases in a MySQL *instance*. Contrast with *partial backup*.
full table scan

An operation that requires reading the entire contents of a table,
rather than just selected portions using an index.  Typically performed
either with small lookup tables, or in data warehousing situations with
large tables where all available data is aggregated and analyzed. How
frequently these operations occur, and the sizes of the tables relative
to available memory, have implications for the algorithms used in query
optimization and managing the buffer pool.

The purpose of *indexes* is to allow lookups for specific values or
ranges of values within a large table, thus avoiding full table scans
when practical.  full-text search

The MySQL feature for finding words, phrases, Boolean combinations of
words, and so on within table data, in a faster, more convenient, and
more flexible way than using the SQL `LIKE' operator or writing your own
application-level search algorithm. It uses the SQL function `MATCH()'
and *FULLTEXT indexes*.  FULLTEXT index

The special kind of *index* that holds the *search index* in the MySQL
*full-text search* mechanism. Represents the words from values of a
column, omitting any that are specified as *stopwords*. Originally, only
available for `MyISAM' tables. Starting in MySQL 5.6.4, it is also
available for *InnoDB* tables.  fuzzy checkpointing

A technique that *flushes* small batches of *dirty pages* from the
*buffer pool*, rather than flushing all dirty pages at once which would
disrupt database processing.

GA

"Generally available", the stage when a software product leaves beta
and is available for sale, official support, and production use.  gap

A place in an InnoDB *index* data structure where new values could be
inserted. When you lock a set of rows with a statement such as `SELECT
... FOR UPDATE', InnoDB can create locks that apply to the gaps as well
as the actual values in the index. For example, if you select all
values greater than 10 for update, a gap lock prevents another
transaction from inserting a new value that is greater than 10. The
*supremum record* and *infimum record* represent the gaps containing
all values greater than or less than all the current index values.  gap
lock

A *lock* on a *gap* between index records, or a lock on the gap before
the first or after the last index record.  For example, `SELECT c1 FOR
UPDATE FROM t WHERE c1 BETWEEN 10 and 20;' prevents other transactions
from inserting a value of 15 into the column `t.c1', whether or not
there was already any such value in the column, because the gaps
between all existing values in the range are locked. Contrast with
*record lock* and *next-key lock*.

Gap locks are part of the tradeoff between performance and
*concurrency*, and are used in some transaction *isolation levels* and
not others.  general loggeneral query log

A type of *log* used for diagnosis and troubleshooting of SQL
statements processed by the MySQL server. Can be stored in a file or in
a database table.  You must enable this feature through the
`general_log' configuration option to use it. You can disable it for a
specific connection through the `sql_log_off' configuration option.

Records a broader range of queries than the *slow query log*. Unlike the
*binary log*, which is used for replication, the general query log
contains *Note `SELECT': select. statements and does not maintain
strict ordering. For more information, see *Note query-log::.
global_transaction

A type of *transaction* involved in *XA* operations. It consists of
several actions that are transactional in themselves, but that all must
either complete successfully as a group, or all be rolled back as a
group. In essence, this extends *ACID* properties "up a level" so that
multiple ACID transactions can be executed in concert as components of
a global operation that also has ACID properties.  For this type of
distributed transaction, you must use the *SERIALIZABLE* isolation
level to achieve ACID properties.  group commit

An `InnoDB' optimization that performs some low-level I/O operations
(*log write*) once for a set of *commit* operations, rather than
flushing and syncing separately for each commit.

When the binlog is enabled, you typically also set the configuration
option `sync_binlog=0', because group commit for the binary log is only
supported if it is set to 0.

hash index

A type of *index* intended for queries that use equality operators,
rather than range operators such as greater-than or `BETWEEN'. It is
available for MEMORY tables. Although hash indexes are the default for
MEMORY tables for historic reasons, that storage engine also supports
*B-tree* indexes, which are often a better choice for general-purpose
queries.

MySQL includes a variant of this index type, the *adaptive hash index*,
that is constructed automatically for InnoDB tables if needed based on
runtime conditions.  HDD

Acronym for "hard disk drive". Refers to storage media using spinning
platters, usually when comparing and contrasting with *SSD*. Its
performance characteristics can influence the throughput of a
*disk-based* workload.  heartbeat

A periodic message that is sent to indicate that a system is
functioning properly. In a *replication* context, if the *master* stops
sending such messages, one of the *slaves* can take its place. Similar
techniques can be used between the servers in a cluster environment, to
confirm that all of them are operating properly.  high-water mark

A value representing an upper limit, either a hard limit that should
not be exceeded at runtime, or a record of the maximum value that was
actually reached. Contrast with *low-water mark*.  history list

A list of *transactions* with delete-marked records scheduled to be
processed by the `InnoDB' *purge* operation. Recorded in the *undo
log*. The length of the history list is reported by the command `SHOW
ENGINE INNODB STATUS'. If the history list grows longer than the value
of the `innodb_max_purge_lag' configuration option, each *DML*
operation is delayed slightly to allow the purge operation to finish
*flushing* the deleted records.

Also known as *purge lag*.  hot

A condition where a row, table, or internal data structure is accessed
so frequently, requiring some form of locking or mutual exclusion, that
it results in a performance or scalability issue.

Although "hot" typically indicates an undesirable condition, a *hot
backup* is the preferred type of backup.  hot backup

A backup taken while the database and is running and applications are
reading and writing to it. The backup involves more than simply copying
data files: it must include any data that was inserted or updated while
the backup was in process; it must exclude any data that was deleted
while the backup was in process; and it must ignore any changes that
were not committed.

The Oracle product that performs hot backups, of InnoDB tables
especially but also tables from MyISAM and other storage engines, is
known as *MySQL Enterprise Backup*.

The hot backup process consists of two stages. The initial copying of
the data files produces a *raw backup*. The *apply* step incorporates
any changes to the database that happened while the backup was running.
Applying the changes produces a *prepared* backup; these files are
ready to be restored whenever necessary.

I/O-boundib-file set

The set of files managed by InnoDB within a MySQL database: the *system
tablespace*, any *file-per-table* tablespaces, and the (typically 2)
*redo log* files. Used sometimes in detailed discussions of InnoDB file
structures and formats, to avoid ambiguity between the meanings of
*database* between different DBMS products, and the non-InnoDB files
that may be part of a MySQL database.  ib_logfile

A set of files, typically named `ib_logfile0' and `ib_logfile1', that
form the *redo log*. Also sometimes referred to as the *log group*.
These files record statements that attempt to change data in InnoDB
tables. These statements are replayed automatically to correct data
written by incomplete transactions, on startup following a crash.

This data cannot be used for manual recovery; for that type of
operation, use the *binary log*.  ibbackup_logfile

A supplemental backup file created by the *MySQL Enterprise Backup*
product during a *hot backup* operation.  It contains information about
any data changes that occurred while the backup was running. The
initial backup files, including `ibbackup_logfile', are known as a *raw
backup*, because the changes that occurred during the backup operation
are not yet incorporated. After you perform the *apply* step to the raw
backup files, the resulting files do include those final data changes,
and are known as a *prepared backup*. At this stage, the
`ibbackup_logfile' file is no longer necessary.  .ibd file

Each InnoDB *table* created using the *file-per-table* mode goes into
its own *tablespace* file, with a `.ibd' extension, inside the
*database* directory. This file contains the table data and any
*indexes* for the table.  File-per-table mode, controlled by the
*innodb_file_per_table* option, affects many aspects of InnoDB storage
usage and performance, and is enabled by default in MySQL 5.6.7 and
higher.

This extension does not apply to the *system tablespace*, which
consists of the *ibdata files*.

When a `.ibd' file is included in a compressed backup by the *MySQL
Enterprise Backup* product, the compressed equivalent is a `.ibz' file.

If a table is create with the `DATA DIRECTORY =' clause in MySQL 5.6
and higher, the `.ibd' file is located outside the normal database
directory, and is pointed to by a *.isl file*.  ibdata file

A set of files with names such as `ibdata1', `ibdata2', and so on, that
make up the InnoDB *system tablespace*. These files contain metadata
about InnoDB tables, (the *data dictionary*), and the storage areas for
the *undo log*, the *change buffer*, and the *doublewrite buffer*. They
also can contain some or all of the table data also (depending on
whether the *file-per-table* mode is in effect when each table is
created). When the *innodb_file_per_table* option is enabled, data and
indexes for newly created tables are stored in separate *.ibd files*
rather than in the system tablespace.

The growth of the `ibdata' files is influenced by the
`innodb_autoextend_increment' configuration option.  ibtmp file

The InnoDB temporary tablespace data file for non-compressed `InnoDB'
temporary tables and related objects.  The configuration file option,
`innodb_temp_data_file_path'
(http://dev.mysql.com/doc/refman/5.7/en/innodb-parameters.html#sysvar_innodb_temp_data_file_path),
allows users to define a relative path for the temporary data file. If
`innodb_temp_data_file_path'
(http://dev.mysql.com/doc/refman/5.7/en/innodb-parameters.html#sysvar_innodb_temp_data_file_path)
is not specified, the default behavior is to create a single auto-
extending 12MB data file named `ibtmp1' in the data directory,
alongside `ibdata1'.  .ibz file

When the *MySQL Enterprise Backup* product performs a *compressed
backup*, it transforms each *tablespace* file that is created using the
*file-per-table* setting from a `.ibd' extension to a `.ibz' extension.

The compression applied during backup is distinct from the *compressed
row format* that keeps table data compressed during normal operation. A
compressed backup operation skips the compression step for a tablespace
that is already in compressed row format, as compressing a second time
would slow down the backup but produce little or no space savings.
ilist

Within an InnoDB *FULLTEXT index*, the data structure consisting of a
document ID and positional information for a token (that is, a
particular word).  implicit row lock

A row lock that InnoDB acquires to ensure consistency, without you
specifically requesting it.  in-memory database

A type of database system that maintains data in memory, to avoid
overhead due to disk I/O and translation between disk blocks and memory
areas. Some in-memory databases sacrifice durability (the "D" in the
*ACID* design philosophy) and are vulnerable to hardware, power, and
other types of failures, making them more suitable for read-only
operations. Other in-memory databases do use durability mechanisms such
as logging changes to disk or using non-volatile memory.

MySQL features that are address the same kinds of memory-intensive
processing include the InnoDB *buffer pool*, *adaptive hash index*, and
*read-only transaction* optimization, the MEMORY storage engine, the
MyISAM key cache, and the MySQL *query cache*.  incremental backup

A type of *hot backup*, performed by the *MySQL Enterprise Backup*
product, that only saves data changed since some point in time.  Having
a full backup and a succession of incremental backups lets you
reconstruct backup data over a long period, without the storage
overhead of keeping several full backups on hand. You can restore the
full backup and then apply each of the incremental backups in
succession, or you can keep the full backup up-to-date by applying each
incremental backup to it, then perform a single restore operation.

The granularity of changed data is at the *page* level. A page might
actually cover more than one row. Each changed page is included in the
backup.  index

A data structure that provides a fast lookup capability for *rows* of a
*table*, typically by forming a tree structure (*B-tree)* representing
all the values of a particular *column* or set of columns.

InnoDB tables always have a *clustered index* representing the *primary
key*. They can also have one or more *secondary indexes* defined on one
or more columns. Depending on their structure, secondary indexes can be
classified as *partial*, *column*, or *composite* indexes.

Indexes are a crucial aspect of *query* performance. Database
architects design tables, queries, and indexes to allow fast lookups
for data needed by applications. The ideal database design uses a
*covering index* where practical; the query results are computed
entirely from the index, without reading the actual table data. Each
*foreign key* constraint also requires an index, to efficiently check
whether values exist in both the *parent* and *child* tables.

Although a B-tree index is the most common, a different kind of data
structure is used for *hash indexes*, as in the `MEMORY' storage engine
and the InnoDB *adaptive hash index*.  index cache

A memory area that holds the token data for InnoDB *full-text search*.
It buffers the data to minimize disk I/O when data is inserted or
updated in columns that are part of a *FULLTEXT index*. The token data
is written to disk when the index cache becomes full. Each InnoDB
`FULLTEXT' index has its own separate index cache, whose size is
controlled by the configuration option `innodb_ft_cache_size'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_ft_cache_size).
index hint

Extended SQL syntax for overriding the *indexes* recommended by the
optimizer. For example, the `FORCE INDEX', `USE INDEX', and `IGNORE
INDEX' clauses. Typically used when indexed columns have unevenly
distributed values, resulting in inaccurate *cardinality* estimates.
index prefix

In an *index* that applies to multiple columns (known as a *composite
index*), the initial or leading columns of the index.  A query that
references the first 1, 2, 3, and so on columns of a composite index
can use the index, even if the query does not reference all the columns
in the index.  index statisticsinfimum record

A *pseudo-record* in an *index*, representing the *gap* below the
smallest value in that index. If a transaction has a statement such as
`SELECT ... FOR UPDATE ... WHERE col < 10;', and the smallest value in
the column is 5, it is a lock on the infimum record that prevents other
transactions from inserting even smaller values such as 0, -10, and so
on.  INFORMATION_SCHEMA

The name of the *database* that provides a query interface to the MySQL
*data dictionary*. (This name is defined by the ANSI SQL standard.) To
examine information (metadata) about the database, you can query tables
such as `INFORMATION_SCHEMA.TABLES' and `INFORMATION_SCHEMA.COLUMNS',
rather than using `SHOW' commands that produce unstructured output.

The information schema contains some tables that are specific to
*InnoDB*, such as *Note `INNODB_LOCKS': innodb-locks-table. and *Note
`INNODB_TRX': innodb-trx-table. You use these tables not to see how the
database is structured, but to get real-time information about the
workings of InnoDB tables to help with performance monitoring, tuning,
and troubleshooting. In particular, these tables provide information
about MySQL features related to *compression*, and *transactions* and
their associated *locks*.  InnoDB

A MySQL component that combines high performance with *transactional*
capability for reliability, robustness, and concurrent access. It
embodies the *ACID* design philosophy.  Represented as a *storage
engine*; it handles tables created or altered with the `ENGINE=INNODB'
clause. See *Note innodb-storage-engine:: for architectural details and
administration procedures, and *Note optimizing-innodb:: for
performance advice.

In MySQL 5.5 and higher, InnoDB is the default storage engine for new
tables and the `ENGINE=INNODB' clause is not required. In MySQL 5.1
only, many of the advanced InnoDB features require enabling the
component known as the InnoDB Plugin. See *Note innodb-default-se:: for
the considerations involved in transitioning to recent releases where
InnoDB tables are the default.

InnoDB tables are ideally suited for *hot backups*. See *Note
mysql-enterprise-backup:: for information about the *MySQL Enterprise
Backup* product for backing up MySQL servers without interrupting normal
processing.  innodb_autoinc_lock_mode

The `innodb_autoinc_lock_mode' option controls the algorithm used for
*auto-increment locking*. When you have an auto-incrementing *primary
key*, you can use statement-based replication only with the setting
`innodb_autoinc_lock_mode=1'.  This setting is known as *consecutive*
lock mode, because multi-row inserts within a transaction receive
consecutive auto-increment values. If you have
`innodb_autoinc_lock_mode=2', which allows higher concurrency for
insert operations, use row-based replication rather than
statement-based replication. This setting is known as *interleaved*
lock mode, because multiple multi-row insert statements running at the
same time can receive autoincrement values that are interleaved. The
setting `innodb_autoinc_lock_mode=0' is the previous (traditional)
default setting and should not be used except for compatibility
purposes.  innodb_file_format

The `innodb_file_format' option determines the *file format* for all
InnoDB *tablespaces* created after you specify a value for this option.
To create tablespaces other than the *system tablespace*, you must also
use the *file-per-table* option.  Currently, you can specify the
*Antelope* and *Barracuda* file formats.  innodb_file_per_table

A very important configuration option that affects many aspects of
InnoDB file storage, availability of features, and I/O characteristics.
In MySQL 5.6.7 and higher, it is enabled by default. Prior to MySQL
5.6.7, it is disabled by default. The `innodb_file_per_table' option
turns on *file-per-table* mode, which stores each newly created InnoDB
table and its associated index in its own *.ibd file*, outside the
*system tablespace*.

This option affects the performance and storage considerations for a
number of SQL statements, such as *Note `DROP TABLE': drop-table. and
*Note `TRUNCATE TABLE': truncate-table.

This option is needed to take full advantage of many other InnoDB
features, such as such as table *compression*, or backups of named
tables in *MySQL Enterprise Backup*.

This option was once static, but can now be set using the *Note `SET
GLOBAL': set-statement. command.

For reference information, see `innodb_file_per_table'. For usage
information, see *Note innodb-multiple-tablespaces::.
innodb_lock_wait_timeout

The `innodb_lock_wait_timeout' option sets the balance between
*waiting* for shared resources to become available, or giving up and
handling the error, retrying, or doing alternative processing in your
application. Rolls back any InnoDB transaction that waits more than a
specified time to acquire a *lock*. Especially useful if *deadlocks*
are caused by updates to multiple tables controlled by different storage
engines; such deadlocks are not *detected* automatically.
innodb_strict_mode

The `innodb_strict_mode' option controls whether InnoDB operates in
*strict mode*, where conditions that are normally treated as warnings,
cause errors instead (and the underlying statements fail).

This mode is the default setting in MySQL 5.5.5 and higher.  insert

One of the primary *DML* operations in *SQL*. The performance of
inserts is a key factor in *data warehouse* systems that load millions
of rows into tables, and *OLTP* systems where many concurrent
connections might insert rows into the same table, in arbitrary order.
If insert performance is important to you, you should learn about
*InnoDB* features such as the *insert buffer* used in *change
buffering*, and *auto-increment* columns.  insert buffer

Former name for the *change buffer*. Now that *change buffering*
includes delete and update operations as well as inserts, "change
buffer" is the preferred term.  insert buffering

The technique of storing secondary index changes due to `INSERT'
operations in the *insert buffer* rather than writing them immediately,
so that the physical writes can be performed to minimize random I/O. It
is one of the types of *change buffering*; the others are *delete
buffering* and *purge buffering*.

Insert buffering is not used if the secondary index is *unique*,
because the uniqueness of new values cannot be verified before the new
entries are written out. Other kinds of change buffering do work for
unique indexes.  instance

A single *mysqld* daemon managing a *data directory* representing one
or more *databases* with a set of *tables*. It is common in
development, testing, and some *replication* scenarios to have multiple
instances on the same *server* machine, each managing its own data
directory and listening on its own port or socket.  With one instance
running a *disk-bound* workload, the server might still have extra CPU
and memory capacity to run additional instances.  instrumentation

Modifications at the source code level to collect performance data for
tuning and debugging. In MySQL, data collected by instrumentation is
exposed through a SQL interface using the `INFORMATION_SCHEMA' and
`PERFORMANCE_SCHEMA' databases.  intention exclusive lockintention lock

A kind of *lock* that applies to the table level, used to indicate what
kind of lock the transaction intends to acquire on rows in the table.
Different transactions can acquire different kinds of intention locks on
the same table, but the first transaction to acquire an *intention
exclusive* (IX) lock on a table prevents other transactions from
acquiring any S or X locks on the table. Conversely, the first
transaction to acquire an *intention shared* (IS) lock on a table
prevents other transactions from acquiring any X locks on the table.
The two-phase process allows the lock requests to be resolved in order,
without blocking locks and corresponding operations that are
compatible. For more details on this locking mechanism, see *Note
innodb-lock-modes::.  intention shared lockinverted index

A data structure optimized for document retrieval systems, used in the
implementation of InnoDB *full-text search*. The InnoDB *FULLTEXT
index*, implemented as an inverted index, records the position of each
word within a document, rather than the location of a table row. A
single column value (a document stored as a text string) is represented
by many entries in the inverted index.  IOPS

Acronym for *I/O operations per second*. A common measurement for busy
systems, particularly *OLTP* applications.  If this value is near the
maximum that the storage devices can handle, the application can become
*disk-bound*, limiting *scalability*.  .isl file

A file that specifies the location of a *.ibd file* for an InnoDB table
created with the `DATA DIRECTORY =' clause in MySQL 5.6 and higher. It
functions like a symbolic link, without the platform restrictions of
the actual symbolic link mechanism.  You can store InnoDB *tablespaces*
outside the *database* directory, for example, on an especially large
or fast storage device depending on the usage of the table. For
details, see Specifying the Location of a Tablespace
(http://dev.mysql.com/doc/refman/5.6/en/tablespace-placing.html).
isolation level

One of the foundations of database processing. Isolation is the *I* in
the acronym *ACID*; the isolation level is the setting that fine-tunes
the balance between performance and reliability, consistency, and
reproducibility of results when multiple *transactions* are making
changes and performing queries at the same time.

From highest amount of consistency and protection to the least, the
isolation levels supported by InnoDB are: *SERIALIZABLE*, *REPEATABLE
READ*, *READ COMMITTED*, and *READ UNCOMMITTED*.

With InnoDB tables, many users can keep the default isolation level
(*REPEATABLE READ*) for all operations. Expert users might choose the
*read committed* level as they push the boundaries of scalability with
OLTP processing, or during data warehousing operations where minor
inconsistencies do not affect the aggregate results of large amounts of
data.  The levels on the edges (*SERIALIZABLE* and *READ UNCOMMITTED*)
change the processing behavior to such an extent that they are rarely
used.

join

A *query* that retrieves data from more than one table, by referencing
columns in the tables that hold identical values. Ideally, these
columns are part of an InnoDB *foreign key* relationship, which ensures
*referential integrity* and that the join columns are *indexed*. Often
used to save space and improve query performance by replacing repeated
strings with numeric IDs, in a *normalized* data design.

KEY_BLOCK_SIZE

An option to specify the size of data pages within an InnoDB table that
uses *compressed row format*. The default is 8 kilobytes. Lower values
risk hitting internal limits that depend on the combination of row size
and compression percentage.

latch

A lightweight structure used by InnoDB to implement a *lock* for its
own internal memory structures, typically held for a brief time
measured in milliseconds or microseconds. A general term that includes
both *mutexes* (for exclusive access) and *rw-locks* (for shared
access). Certain latches are the focus of InnoDB performance tuning,
such as the *data dictionary* mutex. Statistics about latch use and
contention are available through the *Performance Schema* interface.
list

The InnoDB *buffer pool* is represented as a list of memory *pages*.
The list is reordered as new pages are accessed and enter the buffer
pool, as pages within the buffer pool are accessed again and are
considered newer, and as pages that are not accessed for a long time are
*evicted* from the buffer pool.  The buffer pool is actually divided
into *sublists*, and the replacement policy is a variation of the
familiar *LRU* technique.  lock

The high-level notion of an object that controls access to a resource,
such as a table, row, or internal data structure, as part of a
*locking* strategy. For intensive performance tuning, you might delve
into the actual structures that implement locks, such as *mutexes* and
*latches*.  lock escalation

An operation used in some database systems that converts many row locks
into a single table lock, saving memory space but reducing concurrent
access to the table. InnoDB uses a space-efficient representation for
row locks, so that lock escalation is not needed.  lock mode

A shared (S) lock allows a transaction to read a row. Multiple
transactions can acquire an S lock on that same row at the same time.

An exclusive (X) lock allows a transaction to update or delete a row.
No other transaction can acquire any kind of lock on that same row at
the same time.

*Intention locks* apply to the table level, and are used to indicate
what kind of lock the transaction intends to acquire on rows in the
table. Different transactions can acquire different kinds of intention
locks on the same table, but the first transaction to acquire an
intention exclusive (IX) lock on a table prevents other transactions
from acquiring any S or X locks on the table.  Conversely, the first
transaction to acquire an intention shared (IS) lock on a table
prevents other transactions from acquiring any X locks on the table.
The two-phase process allows the lock requests to be resolved in order,
without blocking locks and corresponding operations that are compatible.
locking

The system of protecting a *transaction* from seeing or changing data
that is being queried or changed by other transactions. The locking
strategy must balance reliability and consistency of database
operations (the principles of the *ACID* philosophy) against the
performance needed for good *concurrency*. Fine-tuning the locking
strategy often involves choosing an *isolation level* and ensuring all
your database operations are safe and reliable for that isolation level.
locking read

A *Note `SELECT': select. statement that also performs a *locking*
operation on an `InnoDB' table. Either *Note `SELECT ... FOR UPDATE':
select. or `SELECT ... LOCK IN SHARE MODE'. It has the potential to
produce a *deadlock*, depending on the *isolation level* of the
transaction. The opposite of a *non-locking read*. Not allowed for
global tables in a *read-only transaction*.  log

In the InnoDB context, "log" or "log files" typically refers to the
*redo log* represented by the *ib_logfile** files. Another log area,
which is physically part of the *system tablespace*, is the *undo log*.

Other kinds of logs that are important in MySQL are the *error log*
(for diagnosing startup and runtime problems), *binary log* (for
working with replication and performing point-in-time restores), the
*general query log* (for diagnosing application problems), and the
*slow query log* (for diagnosing performance problems).  log buffer

The memory area that holds data to be written to the *log files* that
make up the *redo log*. It is controlled by the `innodb_log_buffer_size'
configuration option.  log file

One of the `ib_logfileN' files that make up the *redo log*. Data is
written to these files from the *log buffer* memory area.  log group

The set of files that make up the *redo log*, typically named
`ib_logfile0' and `ib_logfile1'. (For that reason, sometimes referred
to collectively as *ib_logfile*.)  logical

A type of operation that involves high-level, abstract aspects such as
tables, queries, indexes, and other SQL concepts.  Typically, logical
aspects are important to make database administration and application
development convenient and usable. Contrast with *physical*.  logical
backup

A *backup* that reproduces table structure and data, without copying
the actual data files. For example, the *`mysqldump'* command produces
a logical backup, because its output contains statements such as
`CREATE TABLE' and `INSERT' that can re-create the data. Contrast with
*physical backup*. A logical backup offers flexibility (for example,
you could edit table definitions or insert statements before
restoring), but can take substantially longer to *restore* than a
physical backup.  loose_

In MySQL 5.1, a prefix added to InnoDB configuration options when
installing the InnoDB *Plugin* after server startup, so any new
configuration options not recognized by the current level of MySQL do
not cause a startup failure. MySQL processes configuration options that
start with this prefix, but gives a warning rather than a failure if
the part after the prefix is not a recognized option.

low-water mark

A value representing a lower limit, typically a threshold value at
which some corrective action begins or becomes more aggressive.
Contrast with *high-water mark*.  LRU

An acronym for "least recently used", a common method for managing
storage areas. The items that have not been used recently are *evicted*
when space is needed to cache newer items. InnoDB uses the LRU
mechanism by default to manage the *pages* within the *buffer pool*, but
makes exceptions in cases where a page might be read only a single
time, such as during a *full table scan*. This variation of the LRU
algorithm is called the *midpoint insertion strategy*. The ways in
which the buffer pool management differs from the traditional LRU
algorithm is fine-tuned by the options `innodb_old_blocks_pct',
`innodb_old_blocks_time', and the new MySQL 5.6 options
`innodb_lru_scan_depth'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_lru_scan_depth)
and `innodb_flush_neighbors'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_flush_neighbors).
LSN

Acronym for "log sequence number". This arbitrary, ever-increasing
value represents a point in time corresponding to operations recorded
in the *redo log*. (This point in time is regardless of *transaction*
boundaries; it can fall in the middle of one or more transactions.) It
is used internally by InnoDB during *crash recovery* and for managing
the buffer pool.

In the *MySQL Enterprise Backup* product, you can specify an LSN to
represent the point in time from which to take an *incremental backup*.
The relevant LSN is displayed by the output of the `mysqlbackup'
command. Once you have the LSN corresponding to the time of a full
backup, you can specify that value to take a subsequent incremental
backup, whose output contains another LSN for the next incremental
backup.

master server

Frequently shortened to "master". A database server machine in a
*replication* scenario that processes the initial insert, update, and
delete requests for data. These changes are propagated to, and repeated
on, other servers known as *slave servers*.  master thread

An InnoDB *thread* that performs various tasks in the background. Most
of these tasks are I/O related, such as writing changes from the
*insert buffer* to the appropriate secondary indexes.

To improve *concurrency*, sometimes actions are moved from the master
thread to separate background threads. For example, in MySQL 5.6 and
higher, *dirty pages* are *flushed* from the *buffer pool* by the *page
cleaner* thread rather than the master thread.  MDL

Acronym for "metadata lock".  memcached

A popular component of many MySQL and *NoSQL* software stacks, allowing
fast reads and writes for single values and caching the results
entirely in memory. Traditionally, applications required extra logic to
write the same data to a MySQL database for permanent storage, or to
read data from a MySQL database when it was not cached yet in memory.
Now, applications can use the simple `memcached' protocol, supported by
client libraries for many languages, to communicate directly with MySQL
servers using *InnoDB* or MySQL Cluster tables. These NoSQL interfaces
to MySQL tables allow applications to achieve higher read and write
performance than by issuing SQL commands directly, and can simplify
application logic and deployment configurations for systems that already
incorporated `memcached' for in-memory caching.

The `memcached' interface to InnoDB tables is available in MySQL 5.6
and higher; see InnoDB Integration with memcached
(http://dev.mysql.com/doc/refman/5.6/en/innodb-memcached.html) for
details. The `memcached' interface to MySQL Cluster tables is available
in MySQL Cluster 7.2; see
`http://dev.mysql.com/doc/ndbapi/en/ndbmemcache.html' for details.
merge

To apply changes to data cached in memory, such as when a page is
brought into the *buffer pool*, and any applicable changes recorded in
the *change buffer* are incorporated into the page in the buffer pool.
The updated data is eventually written to the *tablespace* by the
*flush* mechanism.  metadata lock

A type of *lock* that prevents *DDL* operations on a table that is
being used at the same time by another *transaction*. For details, see
*Note metadata-locking::.

Enhancements to *online* operations, particularly in MySQL 5.6 and
higher, are focused on reducing the amount of metadata locking. The
objective is for DDL operations that do not change the table structure
(such as *Note `CREATE INDEX': create-index. and *Note `DROP INDEX':
drop-index. for `InnoDB' tables) to proceed while the table is being
queried, updated, and so on by other transactions.  metrics counter

A feature implemented by the `innodb_metrics'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-metrics-table.html)
table in the *information_schema*, in MySQL 5.6 and higher. You can
query *counts* and totals for low-level InnoDB operations, and use the
results for performance tuning in combination with data from the
*performance_schema*.  midpoint insertion strategy

The technique of initially bringing *pages* into the InnoDB *buffer
pool* not at the "newest" end of the list, but instead somewhere in the
middle. The exact location of this point can vary, based on the setting
of the `innodb_old_blocks_pct' option.  The intent is that blocks that
are only read once, such as during a *full table scan*, can be aged out
of the buffer pool sooner than with a strict *LRU* algorithm.
mini-transaction

An internal phase of InnoDB processing, when making changes at the
*physical* level to internal data structures during *DML* operations. A
mini-transaction has no notion of *rollback*; multiple
mini-transactions can occur within a single *transaction*.
Mini-transactions write information to the *redo log* that is used
during *crash recovery*. A mini-transaction can also happen outside the
context of a regular transaction, for example during *purge* processing
by background threads.  mixed-mode insert

An *Note `INSERT': insert. statement where *auto-increment* values are
specified for some but not all of the new rows. For example, a
multi-value `INSERT' could specify a value for the auto-increment
column in some cases and `NULL' in other cases.  `InnoDB' generates
auto-increment values for the rows where the column value was specified
as `NULL'. Another example is an *Note `INSERT ... ON DUPLICATE KEY
UPDATE': insert-on-duplicate. statement, where auto-increment values
might be generated but not used, for any duplicate rows that are
processed as `UPDATE' rather than `INSERT' statements.

Can cause consistency issues between *master* and *slave* servers in a
*replication* configuration. Can require adjusting the value of the
*innodb_autoinc_lock_mode* configuration option.  .MRG file

A file containing references to other tables, used by the `MERGE'
storage engine. Files with this extension are always included in
backups produced by the `mysqlbackup' command of the *MySQL Enterprise
Backup* product.  multi-core

A type of processor that can take advantage of multi-threaded programs,
such as the MySQL server.  multiversion concurrency controlmutex

Informal abbreviation for "mutex variable". (Mutex itself is short for
"mutual exclusion".) The low-level object that InnoDB uses to represent
and enforce exclusive-access *locks* to internal in-memory data
structures. Once the lock is acquired, any other process, thread, and
so on is prevented from acquiring the same lock.  Contrast with
*rw-locks*, which allow shared access. Mutexes and rw-locks are known
collectively as *latches*.  MVCC

Acronym for "multiversion concurrency control". This technique lets
InnoDB *transactions* with certain *isolation levels* to perform
*consistent read* operations; that is, to query rows that are being
updated by other transactions, and see the values from before those
updates occurred. This is a powerful technique to increase
*concurrency*, by allowing queries to proceed without waiting due to
*locks* held by the other transactions.

This technique is not universal in the database world. Some other
database products, and some other MySQL storage engines, do not support
it.  my.cnf

The name, on UNIX or Linux systems, of the MySQL option file.  my.ini

The name, on Windows systems, of the MySQL option file.  .MYD file

A file that MySQL uses to store data for a MyISAM table.  .MYI file

A file that MySQL uses to store indexes for a MyISAM table.  mysql

The `mysql' program is the command-line interpreter for the MySQL
database. It processes *SQL* statements, and also MySQL-specific
commands such as `SHOW TABLES', by passing requests to the *`mysqld'*
daemon.  MySQL Enterprise Backup

A licensed product that performs *hot backups* of MySQL databases. It
offers the most efficiency and flexibility when backing up *InnoDB*
tables, but can also back up MyISAM and other kinds of tables.
mysqlbackup command

A command-line tool of the *MySQL Enterprise Backup* product. It
performs a *hot backup* operation for InnoDB tables, and a warm backup
for MyISAM and other kinds of tables. See *Note
mysql-enterprise-backup:: for more information about this command.
mysqld

The `mysqld' program is the database engine for the MySQL database. It
runs as a UNIX daemon or Windows service, constantly waiting for
requests and performing maintenance work in the background.  mysqldump

A command that performs a *logical backup* of some combination of
databases, tables, and table data. The results are SQL statements that
reproduce the original schema objects, data, or both. For substantial
amounts of data, a *physical backup* solution such as *MySQL Enterprise
Backup* is faster, particularly for the *restore* operation.

natural key

A indexed column, typically a *primary key*, where the values have some
real-world significance. Usually advised against because:

   * If the value should ever change, there is potentially a lot of
     index maintenance to re-sort the *clustered index* and update the
     copies of the primary key value that are repeated in each
     *secondary index*.

   * Even seemingly stable values can change in unpredictable ways that
     are difficult to represent correctly in the database. For example,
     one country can change into two or several, making the original
     country code obsolete. Or, rules about unique values might have
     exceptions. For example, even if taxpayer IDs are intended to be
     unique to a single person, a database might have to handle records
     that violate that rule, such as in cases of identity theft.
     Taxpayer IDs and other sensitive ID numbers also make poor primary
     keys, because they may need to be secured, encrypted, and
     otherwise treated differently than other columns.

Thus, it is typically better to use arbitrary numeric values to form a
*synthetic key*, for example using an *auto-increment* column.
neighbor page

Any *page* in the same *extent* as a particular page.  When a page is
selected to be *flushed*, any neighbor pages that are *dirty* are
typically flushed as well, as an I/O optimization for traditional hard
disks. In MySQL 5.6 and up, this behavior can be controlled by the
configuration variable `innodb_flush_neighbors'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_flush_neighbors);
you might turn that setting off for SSD drives, which do not have the
same overhead for writing smaller batches of data at random locations.
next-key lock

A combination of a *record lock* on the index record and a gap lock on
the gap before the index record.  non-blocking I/O

An industry term that means the same as *asynchronous I/O*.
non-locking read

A *query* that does not use the `SELECT ... FOR UPDATE' or `SELECT ...
LOCK IN SHARE MODE' clauses. The only kind of query allowed for global
tables in a *read-only transaction*. The opposite of a *locking read*.
non-repeatable read

The situation when a query retrieves data, and a later query within the
same *transaction* retrieves what should be the same data, but the
queries return different results (changed by another transaction
committing in the meantime).

This kind of operation goes against the *ACID* principle of database
design. Within a transaction, data should be consistent, with
predictable and stable relationships.

Among different *isolation levels*, non-repeatable reads are prevented
by the *serializable read* and *repeatable read* levels, and allowed by
the *consistent read*, and *read uncommitted* levels.  normalized

A database design strategy where data is split into multiple tables,
and duplicate values condensed into single rows represented by an ID,
to avoid storing, querying, and updating redundant or lengthy values.
It is typically used in *OLTP* applications.

For example, an address might be given a unique ID, so that a census
database could represent the relationship *lives at this address* by
associating that ID with each member of a family, rather than storing
multiple copies of a complex value such as *123 Main Street, Anytown,
USA*.

For another example, although a simple address book application might
store each phone number in the same table as a person's name and
address, a phone company database might give each phone number a
special ID, and store the numbers and IDs in a separate table. This
normalized representation could simplify large-scale updates when area
codes split apart.

Normalization is not always recommended. Data that is primarily
queried, and only updated by deleting entirely and reloading, is often
kept in fewer, larger tables with redundant copies of duplicate values.
This data representation is referred to as *denormalized*, and is
frequently found in data warehousing applications.  NoSQL

A broad term for a set of data access technologies that do not use the
*SQL* language as their primary mechanism for reading and writing data.
Some NoSQL technologies act as key-value stores, only accepting
single-value reads and writes; some relax the restrictions of the
*ACID* methodology; still others do not require a pre-planned *schema*.
MySQL users can combine NoSQL-style processing for speed and simplicity
with SQL operations for flexibility and convenience, by using the
*memcached* API to directly access some kinds of MySQL tables. The
`memcached' interface to InnoDB tables is available in MySQL 5.6 and
higher; see InnoDB Integration with memcached
(http://dev.mysql.com/doc/refman/5.6/en/innodb-memcached.html) for
details. The `memcached' interface to MySQL Cluster tables is available
in MySQL Cluster 7.2; see
`http://dev.mysql.com/doc/ndbapi/en/ndbmemcache.html' for details.  NOT
NULL constraint

A type of *constraint* that specifies that a *column* cannot contain
any *NULL* values. It helps to preserve *referential integrity*, as the
database server can identify data with erroneous missing values. It
also helps in the arithmetic involved in query optimization, allowing
the optimizer to predict the number of entries in an index on that
column.  NULL

A special value in *SQL*, indicating the absence of data. Any
arithmetic operation or equality test involving a `NULL' value, in turn
produces a `NULL' result. (Thus it is similar to the IEEE
floating-point concept of NaN, "not a number".) Any aggregate
calculation such as `AVG()' ignores rows with `NULL' values, when
determining how many rows to divide by. The only test that works with
`NULL' values uses the SQL idioms `IS NULL' or `IS NOT NULL'.

`NULL' values play a part in index operations, because for performance
a database must minimize the overhead of keeping track of missing data
values. Typically, `NULL' values are not stored in an index, because a
query that tests an indexed column using a standard comparison operator
could never match a row with a `NULL' value for that column. For the
same reason, unique indexes do not prevent `NULL' values; those values
simply are not represented in the index.  Declaring a `NOT NULL'
constraint on a column provides reassurance that there are no rows left
out of the index, allowing for better query optimization (accurate
counting of rows and estimation of whether to use the index).

Because the *primary key* must be able to uniquely identify every row
in the table, a single-column primary key cannot contain any `NULL'
values, and a multi-column primary key cannot contain any rows with
`NULL' values in all columns.

Although the Oracle database allows a `NULL' value to be concatenated
with a string, InnoDB treats the result of such an operation as `NULL'.

off-page column

A column containing variable-length data (such as `BLOB' and `VARCHAR')
that is too long to fit on a *B-tree* page. The data is stored in
*overflow pages*. The `DYNAMIC' row format in the InnoDB *Barracuda*
file format is more efficient for such storage than the older `COMPACT'
row format.  OLTP

Acronym for "Online Transaction Processing". A database system, or a
database application, that runs a workload with many *transactions*,
with frequent writes as well as reads, typically affecting small
amounts of data at a time. For example, an airline reservation system
or an application that processes bank deposits. The data might be
organized in *normalized* form for a balance between *DML*
(insert/update/delete) efficiency and *query* efficiency. Contrast with
*data warehouse*.

With its *row-level locking* and *transactional* capability, *InnoDB*
is the ideal storage engine for MySQL tables used in OLTP applications.
online

A type of operation that involves no downtime, blocking, or restricted
operation for the database. Typically applied to *DDL*. Operations that
shorten the periods of restricted operation, such as *fast index
creation*, have evolved into a wider set of *online DDL* operations in
MySQL 5.6.

In the context of backups, a *hot backup* is an online operation and a
*warm backup* is partially an online operation.  online DDL

A feature that improves the performance, concurrency, and availability
of InnoDB tables during *DDL* (primarily *Note `ALTER TABLE':
alter-table.) operations. See Online DDL for `InnoDB' Tables
(http://dev.mysql.com/doc/refman/5.6/en/innodb-online-ddl.html) for
details.

The details vary according to the type of operation. In some cases, the
table can be modified concurrently while the `ALTER TABLE' is in
progress. The operation might be able to be performed without doing a
table copy, or using a specially optimized type of table copy. Space
usage is controlled by the `innodb_online_alter_log_max_size'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_online_alter_log_max_size)
configuration option.

This feature is an enhancement of the *Fast Index Creation* feature in
MySQL 5.5 and the InnoDB Plugin for MySQL 5.1.  .OPT file

A file containing database configuration information. Files with this
extension are always included in backups produced by the `mysqlbackup'
command of the *MySQL Enterprise Backup* product.  optimistic

A methodology that guides low-level implementation decisions for a
relational database system. The requirements of performance and
*concurrency* in a relational database mean that operations must be
started or dispatched quickly. The requirements of consistency and
*referential integrity* mean that any operation could fail: a
transaction might be rolled back, a *DML* operation could violate a
constraint, a request for a lock could cause a deadlock, a network
error could cause a timeout. An optimistic strategy is one that assumes
most requests or attempts will succeed, so that relatively little work
is done to prepare for the failure case.  When this assumption is true,
the database does little unnecessary work; when requests do fail, extra
work must be done to clean up and undo changes.

InnoDB uses optimistic strategies for operations such as *locking* and
*commits*. For example, data changed by a transaction can be written to
the data files before the commit occurs, making the commit itself very
fast, but requiring more work to undo the changes if the transaction is
rolled back.

The opposite of an optimistic strategy is a *pessimistic* one, where a
system is optimized to deal with operations that are unreliable and
frequently unsuccessful. This methodology is rare in a database system,
because so much care goes into choosing reliable hardware, networks,
and algorithms.  optimizer

The MySQL component that determines the best *indexes* and *join* order
to use for a *query*, based on characteristics and data distribution of
the relevant *tables*.  option

A configuration parameter for MySQL, either stored in the *option file*
or passed on the command line.

For the options that apply to *InnoDB* tables, each option name starts
with the prefix `innodb_'.  option file

The file that holds the configuration *options* for the MySQL instance.
Traditionally, on Linux and UNIX this file is named `my.cnf', and on
Windows it is named `my.ini'.  overflow page

Separately allocated disk *pages* that hold variable-length columns
(such as `BLOB' and `VARCHAR') that are too long to fit on a *B-tree*
page. The associated columns are known as *off-page columns*.

page

A unit representing how much data InnoDB transfers at any one time
between disk (the *data files*) and memory (the *buffer pool*). A page
can contain one or more *rows*, depending on how much data is in each
row. If a row does not fit entirely into a single page, InnoDB sets up
additional pointer-style data structures so that the information about
the row can be stored in one page.

One way to fit more data in each page is to use *compressed row
format*. For tables that use BLOBs or large text fields, *compact row
format* allows those large columns to be stored separately from the
rest of the row, reducing I/O overhead and memory usage for queries
that do not reference those columns.

When InnoDB reads or writes sets of pages as a batch to increase I/O
throughput, it reads or writes an *extent* at a time.

All the InnoDB disk data structures within a MySQL instance share the
same *page size*.  page cleaner

An InnoDB background *thread* that *flushes* *dirty pages* from the
*buffer pool*. Prior to MySQL 5.6, this activity was performed by the
*master thread* page size

For releases up to and including MySQL 5.5, the size of each InnoDB
*page* is fixed at 16 kilobytes. This value represents a balance: large
enough to hold the data for most rows, yet small enough to minimize the
performance overhead of transferring unneeded data to memory.  Other
values are not tested or supported.

Starting in MySQL 5.6, the page size for an InnoDB *instance* can be
either 4KB, 8KB, or 16KB, controlled by the `innodb_page_size'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_page_size)
configuration option. You set the size when creating the MySQL
instance, and it remains constant afterwards. The same page size
applies to all InnoDB *tablespaces*, both the *system tablespace* and
any separate tablespaces created in *file-per-table* mode.

Smaller page sizes can help performance with storage devices that use
small block sizes, particularly for *SSD* devices in *disk-bound*
workloads, such as for *OLTP* applications. As individual rows are
updated, less data is copied into memory, written to disk, reorganized,
locked, and so on.  .PAR file

A file containing partition definitions. Files with this extension are
always included in backups produced by the `mysqlbackup' command of the
*MySQL Enterprise Backup* product.  parent table

The table in a *foreign key* relationship that holds the initial column
values pointed to from the *child table*. The consequences of deleting,
or updating rows in the parent table depend on the `ON UPDATE' and `ON
DELETE' clauses in the foreign key definition. Rows with corresponding
values in the child table could be automatically deleted or updated in
turn, or those columns could be set to `NULL', or the operation could be
prevented.  partial backup

A *backup* that contains some of the *tables* in a MySQL database, or
some of the databases in a MySQL instance. Contrast with *full backup*.
partial index

An *index* that represents only part of a column value, typically the
first N characters (the *prefix*) of a long `VARCHAR' value.
Performance Schema

The `performance_schema' schema, in MySQL 5.5 and up, presents a set of
tables that you can query to get detailed information about the
performance characteristics of many internal parts of the MySQL server.
persistent statistics

A feature in MySQL 5.6 that stores *index* statistics for InnoDB
*tables* on disk, providing better *plan stability* for *queries*.
pessimistic

A methodology that sacrifices performance or concurrency in favor of
safety. It is appropriate if a high proportion of requests or attempts
might fail, or if the consequences of a failed request are severe.
InnoDB uses what is known as a pessimistic *locking* strategy, to
minimize the chance of *deadlocks*. At the application level, you might
avoid deadlocks by using a pessimistic strategy of acquiring all locks
needed by a transaction at the very beginning.

Many built-in database mechanisms use the opposite *optimistic*
methodology.  phantom

A row that appears in the result set of a query, but not in the result
set of an earlier query. For example, if a query is run twice within a
*transaction*, and in the meantime, another transaction commits after
inserting a new row or updating a row so that it matches the `WHERE'
clause of the query.

This occurrence is known as a phantom read. It is harder to guard
against than a *non-repeatable read*, because locking all the rows from
the first query result set does not prevent the changes that cause the
phantom to appear.

Among different *isolation levels*, phantom reads are prevented by the
*serializable read* level, and allowed by the *repeatable read*,
*consistent read*, and *read uncommitted* levels.  physical

A type of operation that involves hardware-related aspects such as disk
blocks, memory pages, files, bits, disk reads, and so on. Typically,
physical aspects are important during expert-level performance tuning
and problem diagnosis. Contrast with *logical*.  physical backup

A *backup* that copies the actual data files. For example, the
*`mysqlbackup'* command of the *MySQL Enterprise Backup* product
produces a physical backup, because its output contains data files that
can be used directly by the `mysqld' server, resulting in a faster
*restore* operation. Contrast with *logical backup*.  PITR

Acronym for *point-in-time recovery*.  plan stability

A property of a *query execution plan*, where the optimizer makes the
same choices each time for a given *query*, so that performance is
consistent and predictable.  plugin

In MySQL 5.1 and earlier, a separately installable form of the *InnoDB*
storage engine that includes features and performance enhancements not
included in the *built-in* InnoDB for those releases.

For MySQL 5.5 and higher, the MySQL distribution includes the very
latest InnoDB features and performance enhancements, known as InnoDB
1.1, and there is no longer a separate InnoDB Plugin.

This distinction is important mainly in MySQL 5.1, where a feature or
bug fix might apply to the InnoDB Plugin but not the built-in InnoDB,
or vice versa.  point-in-time recovery

The process of restoring a *backup* to recreate the state of the
database at a specific date and time. Commonly abbreviated *PITR*.
Because it is unlikely that the specified time corresponds exactly to
the time of a backup, this technique usually requires a combination of a
*physical backup* and a *logical backup*. For example, with the *MySQL
Enterprise Backup* product, you restore the last backup that you took
before the specified point in time, then replay changes from the
*binary log* between the time of the backup and the PITR time.
prefixprepared backup

A set of backup files, produced by the *MySQL Enterprise Backup*
product, after all the stages of applying *binary logs* and
*incremental backups* are finished. The resulting files are ready to be
*restored*. Prior to the apply steps, the files are known as a *raw
backup*.  primary key

A set of columns - and by implication, the index based on this set of
columns - that can uniquely identify every row in a table. As such, it
must be a unique index that does not contain any `NULL' values.

InnoDB requires that every table has such an index (also called the
*clustered index* or *cluster index*), and organizes the table storage
based on the column values of the primary key.

When choosing primary key values, consider using arbitrary values (a
*synthetic key*) rather than relying on values derived from some other
source (a *natural key*).  process

An instance of an executing program. The operating system switches
between multiple running processes, allowing for a certain degree of
*concurrency*.  On most operating systems, processes can contain
multiple *threads* of execution that share resources. Context-switching
between threads is faster than the equivalent switching between
processes.  pseudo-record

An artificial record in an index, used for *locking* key values or
ranges that do not currently exist.  Pthreads

The POSIX threads standard, which defines an API for threading and
locking operations on UNIX and Linux systems. On UNIX and Linux
systems, InnoDB uses this implementation for *mutexes*.  purge

A type of garbage collection performed by a separate thread, running on
a periodic schedule. The purge includes these actions: removing
obsolete values from indexes; physically removing rows that were marked
for deletion by previous `DELETE' statements.  purge buffering

The technique of storing index changes due to `DELETE' operations in the
*insert buffer* rather than writing them immediately, so that the
physical writes can be performed to minimize random I/O. (Because
delete operations are a two-step process, this operation buffers the
write that normally purges an index record that was previously marked
for deletion.) It is one of the types of *change buffering*; the others
are *insert buffering*. and *delete buffering* purge lag

Another name for the `InnoDB' *history list*. Related to the
`innodb_max_purge_lag' configuration option.  purge thread

A *thread* within the InnoDB process that is dedicated to performing
the periodic *purge* operation. In MySQL 5.6 and higher, multiple purge
threads are enabled by the `innodb_purge_threads' configuration option.

query

In *SQL*, an operation that reads information from one or more
*tables*. Depending on the organization of data and the parameters of
the query, the lookup might be optimized by consulting an *index*. If
multiple tables are involved, the query is known as a *join*.

For historical reasons, sometimes discussions of internal processing
for statements use "query" in a broader sense, including other types of
MySQL statements such as *DDL* and *DML* statements.  query execution
plan

The set of decisions made by the optimizer about how to perform a
*query* most efficiently, including which *index* or indexes to use,
and the order in which to *join* tables.  *Plan stability* involves the
same choices being made consistently for a given query.  query
logquiesce

To reduce the amount of database activity, often in preparation for an
operation such as an *Note `ALTER TABLE': alter-table, a *backup*, or a
*shutdown*. Might or might not involve doing as much *flushing* as
possible, so that *InnoDB* does not continue doing background I/O.

In MySQL 5.6 and higher, the syntax `FLUSH TABLES ...  FOR EXPORT'
writes some data to disk for `InnoDB' tables that make it simpler to
back up those tables by copying the data files.

RAID

Acronym for "Redundant Array of Inexpensive Drives". Spreading I/O
operations across multiple drives enables greater *concurrency* at the
hardware level, and improves the efficiency of low-level write
operations that otherwise would be performed in sequence.  random dive

A technique for quickly estimating the number of different values in a
column (the column's cardinality). InnoDB samples pages at random from
the index and uses that data to estimate the number of different
values. This operation occurs when each table is first opened.

Originally, the number of sampled pages was fixed at 8; now, it is
determined by the setting of the `innodb_stats_sample_pages' parameter.

The way the random pages are picked depends on the setting of the
innodb_use_legacy_cardinality_algorithm parameter. The default setting
(OFF) has better randomness than in older releases.  raw backup

The initial set of backup files produced by the *MySQL Enterprise
Backup* product, before the changes reflected in the *binary log* and
any *incremental backups* are applied. At this stage, the files are not
ready to *restore*. After these changes are applied, the files are
known as a *prepared backup*.  READ COMMITTED

An *isolation level* that uses a *locking* strategy that relaxes some
of the protection between *transactions*, in the interest of
performance. Transactions cannot see uncommitted data from other
transactions, but they can see data that is committed by another
transaction after the current transaction started. Thus, a transaction
never sees any bad data, but the data that it does see may depend to
some extent on the timing of other transactions.

When a transaction with this isolation level performs `UPDATE ...
WHERE' or `DELETE ...  WHERE' operations, other transactions might have
to wait. The transaction can perform `SELECT ... FOR UPDATE', and `LOCK
IN SHARE MODE' operations without making other transactions wait.  READ
UNCOMMITTED

The *isolation level* that provides the least amount of protection
between transactions.  Queries employ a *locking* strategy that allows
them to proceed in situations where they would normally wait for
another transaction. However, this extra performance comes at the cost
of less reliable results, including data that has been changed by other
transactions and not committed yet (known as *dirty read*). Use this
isolation level only with great caution, and be aware that the results
might not be consistent or reproducible, depending on what other
transactions are doing at the same time. Typically, transactions with
this isolation level do only queries, not insert, update, or delete
operations.  read view

An internal snapshot used by the *MVCC* mechanism of InnoDB.  Certain
*transactions*, depending on their *isolation level*, see the data
values as they were at the time the transaction (or in some cases, the
statement) started. Isolation levels that use a read view are
*REPEATABLE READ*, *READ COMMITTED*, and *READ UNCOMMITTED*.  read-ahead

A type of I/O request that prefetches a group of *pages* (an entire
*extent*) into the *buffer pool* asynchronously, in anticipation that
these pages will be needed soon. The linear read-ahead technique
prefetches all the pages of one extent based on access patterns for
pages in the preceding extent, and is part of all MySQL versions
starting with the InnoDB Plugin for MySQL 5.1. The random read-ahead
technique prefetches all the pages for an extent once a certain number
of pages from the same extent are in the buffer pool. Random read-ahead
is not part of MySQL 5.5, but is re-introduced in MySQL 5.6 under the
control of the `innodb_random_read_ahead' configuration option.
read-only transaction

A type of transaction that can be optimized for `InnoDB' tables by
eliminating some of the bookkeeping involved with creating a *read
view* for each transaction. Can only perform *non-locking read*
queries. It can be started explicitly with the syntax *Note `START
TRANSACTION READ ONLY': commit, or automatically under certain
conditions. See Optimizations for Read-Only Transactions
(http://dev.mysql.com/doc/refman/5.6/en/innodb-performance.html#innodb-performance-ro-txn)
for details.  record lock

A lock on an index record. For example, `SELECT c1 FOR UPDATE FROM t
WHERE c1 = 10;' prevents any other transaction from inserting,
updating, or deleting rows where the value of `t.c1' is 10. Contrast
with *gap lock* and *next-key lock*.  redo

The data, in units of records, recorded in the *redo log* when DML
statements make changes to InnoDB tables. It is used during *crash
recovery* to correct data written by incomplete *transactions*. The
ever-increasing *LSN* value represents the cumulative amount of redo
data that has passed through the redo log.  redo log

A disk-based data structure used during *crash recovery*, to correct
data written by incomplete *transactions*. During normal operation, it
encodes requests to change InnoDB table data, which result from SQL
statements or low-level API calls through NoSQL interfaces.
Modifications that did not finish updating the *data files* before an
unexpected *shutdown* are replayed automatically.

The redo log is physically represented as a set of files, typically
named `ib_logfile0' and `ib_logfile1'. The data in the redo log is
encoded in terms of records affected; this data is collectively
referred to as *redo*. The passage of data through the redo logs is
represented by the ever-increasing *LSN* value. The original 4GB limit
on maximum size for the redo log is raised to 512GB in MySQL 5.6.

The disk layout of the redo log is influenced by the configuration
options `innodb_log_file_size', `innodb_log_group_home_dir', and
(rarely) `innodb_log_files_in_group'. The performance of redo log
operations is also affected by the *log buffer*, which is controlled by
the `innodb_log_buffer_size' configuration option.  redundant row format

The oldest InnoDB row format, available for tables using the *Antelope*
*file format*. Prior to MySQL 5.0.3, it was the only row format
available in InnoDB. In My SQL 5.0.3 and later, the default is *compact
row format*. You can still specify redundant row format for
compatibility with older InnoDB tables.  referential integrity

The technique of maintaining data always in a consistent format, part
of the *ACID* philosophy. In particular, data in different tables is
kept consistent through the use of *foreign key constraints*, which can
prevent changes from happening or automatically propagate those changes
to all related tables.  Related mechanisms include the *unique
constraint*, which prevents duplicate values from being inserted by
mistake, and the *NOT NULL constraint*, which prevents blank values from
being inserted by mistake.  relational

An important aspect of modern database systems. The database server
encodes and enforces relationships such as one-to-one, one-to-many,
many-to-one, and uniqueness. For example, a person might have zero,
one, or many phone numbers in an address database; a single phone
number might be associated with several family members. In a financial
database, a person might be required to have exactly one taxpayer ID,
and any taxpayer ID could only be associated with one person.

The database server can use these relationships to prevent bad data
from being inserted, and to find efficient ways to look up information.
For example, if a value is declared to be unique, the server can stop
searching as soon as the first match is found, and it can reject
attempts to insert a second copy of the same value.

At the database level, these relationships are expressed through SQL
features such as *columns* within a table, unique and `NOT NULL'
*constraints*, *foreign keys*, and different kinds of join operations.
Complex relationships typically involve data split between more than
one table. Often, the data is *normalized*, so that duplicate values in
one-to-many relationships are stored only once.

In a mathematical context, the relations within a database are derived
from set theory. For example, the `OR' and `AND' operators of a `WHERE'
clause represent the notions of union and intersection.  relevance

In the *full-text search* feature, a number signifying the similarity
between the search string and the data in the *FULLTEXT index*. For
example, when you search for a single word, that word is typically more
relevant for a row where if it occurs several times in the text than a
row where it appears only once.  REPEATABLE READ

The default *isolation level* for InnoDB. It prevents any rows that are
queried from being changed by other transactions, thus blocking
*non-repeatable reads* but not *phantom* reads. It uses a moderately
strict *locking* strategy so that all queries within a transaction see
data from the same snapshot, that is, the data as it was at the time the
transaction started.

When a transaction with this isolation level performs `UPDATE ...
WHERE', `DELETE ...  WHERE', `SELECT ... FOR UPDATE', and `LOCK IN
SHARE MODE' operations, other transactions might have to wait.
replication

The practice of sending changes from a *master database*, to one or more
*slave databases*, so that all databases have the same data. This
technique has a wide range of uses, such as load-balancing for better
scalability, disaster recovery, and testing software upgrades and
configuration changes. The changes can be sent between the database by
methods called *row-based replication* and *statement-based
replication*.  restore

The process of putting a set of backup files from the *MySQL Enterprise
Backup* product in place for use by MySQL. This operation can be
performed to fix a corrupted database, to return to some earlier point
in time, or (in a *replication* context) to set up a new *slave
database*. In the *MySQL Enterprise Backup* product, this operation is
performed by the `copy-back' option of the `mysqlbackup' command.
rollback

A *SQL* statement that ends a *transaction*, undoing any changes made
by the transaction. It is the opposite of *commit*, which makes
permanent any changes made in the transaction.

By default, MySQL uses the *autocommit* setting, which automatically
issues a commit following each SQL statement. You must change this
setting before you can use the rollback technique.  rollback segment

The storage area containing the *undo log*, part of the *system
tablespace*.  row

The logical data structure defined by a set of *columns*. A set of rows
makes up a *table*. Within InnoDB *data files*, each *page* can contain
one or more rows.

Although InnoDB uses the term *row format* for consistency with MySQL
syntax, the row format is a property of each table and applies to all
rows in that table.  row format

The disk storage format for a *row* from an InnoDB *table*. As InnoDB
gains new capabilities such as compression, new row formats are
introduced to support the resulting improvements in storage efficiency
and performance.

Each table has its own row format, specified through the `ROW_FORMAT'
option. To see the row format for each InnoDB table, issue the command
`SHOW TABLE STATUS'. Because all the tables in the system tablespace
share the same row format, to take advantage of other row formats
typically requires setting the `innodb_file_per_table' option, so that
each table is stored in a separate tablespace.  row lock

A *lock* that prevents a row from being accessed in an incompatible way
by another *transaction*. Other rows in the same table can be freely
written to by other transactions. This is the type of *locking* done by
*DML* operations on *InnoDB* tables.

Contrast with *table locks* used by MyISAM, or during *DDL* operations
on InnoDB tables that cannot be done with *online DDL*; those locks
block concurrent access to the table.  row-based replication

A form of *replication* where events are propagated from the *master*
server specifying how to change individual rows on the *slave* server.
It is safe to use for all settings of the `innodb_autoinc_lock_mode'
option.  row-level locking

The *locking* mechanism used for *InnoDB* tables, relying on *row
locks* rather than *table locks*. Multiple *transactions* can modify the
same table concurrently. Only if two transactions try to modify the
same row does one of the transactions wait for the other to complete
(and release its row locks).  rw-lock

The low-level object that InnoDB uses to represent and enforce
shared-access *locks* to internal in-memory data structures. Once the
lock is acquired, any other process, thread, and so on can read the
data structure, but no one else can write to it. Contrast with
*mutexes*, which enforce exclusive access. Mutexes and rw-locks are
known collectively as *latches*.

savepoint

Savepoints help to implement nested *transactions*. They can be used to
provide scope to operations on tables that are part of a larger
transaction. For example, scheduling a trip in a reservation system
might involve booking several different flights; if a desired flight is
unavailable, you might *roll back* the changes involved in booking that
one leg, without rolling back the earlier flights that were
successfully booked.  scalability

The ability to add more work and issue more simultaneous requests to a
system, without a sudden drop in performance due to exceeding the
limits of system capacity. Software architecture, hardware
configuration, application coding, and type of workload all play a part
in scalability. When the system reaches its maximum capacity, popular
techniques for increasing scalability are *scale up* (increasing the
capacity of existing hardware or software) and *scale out* (adding new
servers and more instances of MySQL). Often paired with *availability*
as critical aspects of a large-scale deployment.  scale out

A technique for increasing *scalability* by adding new servers and more
instances of MySQL. For example, setting up replication, MySQL Cluster,
connection pooling, or other features that spread work across a group
of servers. Contrast with *scale up*.  scale up

A technique for increasing *scalability* by increasing the capacity of
existing hardware or software. For example, increasing the memory on a
server and adjusting memory-related parameters such as
`innodb_buffer_pool_size' and `innodb_buffer_pool_instances'.  Contrast
with *scale out*.  schema

Conceptually, a schema is a set of interrelated database objects, such
as tables, table columns, data types of the columns, indexes, foreign
keys, and so on. These objects are connected through SQL syntax,
because the columns make up the tables, the foreign keys refer to
tables and columns, and so on.  Ideally, they are also connected
logically, working together as part of a unified application or
flexible framework. For example, the *information_schema* and
*performance_schema* databases use "schema" in their names to emphasize
the close relationships between the tables and columns they contain.

In MySQL, physically, a *schema* is synonymous with a *database*.  You
can substitute the keyword `SCHEMA' instead of `DATABASE' in MySQL SQL
syntax, for example using `CREATE SCHEMA' instead of `CREATE DATABASE'.

Some other database products draw a distinction. For example, in the
Oracle Database product, a *schema* represents only a part of a
database: the tables and other objects owned by a single user.  search
index

In MySQL, *full-text search* queries use a special kind of index, the
*FULLTEXT* index. In MySQL 5.6.4 and up, `InnoDB' and `MyISAM' tables
both support `FULLTEXT' indexes; formerly, these indexes were only
available for `MyISAM' tables.  secondary index

A type of InnoDB *index* that represents a subset of table columns. An
InnoDB table can have zero, one, or many secondary indexes. (Contrast
with the *clustered index*, which is required for each InnoDB table,
and stores the data for all the table columns.)

A secondary index can be used to satisfy queries that only require
values from the indexed columns. For more complex queries, it can be
used to identify the relevant rows in the table, which are then
retrieved through lookups using the clustered index.

Creating and dropping secondary indexes has traditionally involved
significant overhead from copying all the data in the InnoDB table. The
*fast index creation* feature of the InnoDB Plugin makes both `CREATE
INDEX' and `DROP INDEX' statements much faster for InnoDB secondary
indexes.  segment

A division within an InnoDB *tablespace*. If a tablespace is analogous
to a directory, the segments are analogous to files within that
directory. A segment can grow. New segments can be created.

For example, within a *file-per-table* tablespace, the table data is in
one segment and each associated index is in its own segment. The *system
tablespace* contains many different segments, because it can hold many
tables and their associated indexes. The system tablespace also
includes up to 128 *rollback segments* making up the *undo log*.

Segments grow and shrink as data is inserted and deleted. When a
segment needs more room, it is extended by one *extent* (1 megabyte) at
a time.  Similarly, a segment releases one extent's worth of space when
all the data in that extent is no longer needed.  selectivity

A property of data distribution, the number of distinct values in a
column (its *cardinality*) divided by the number of records in the
table. High selectivity means that the column values are relatively
unique, and can retrieved efficiently through an index. If you (or the
query optimizer) can predict that a test in a `WHERE' clause only
matches a small number (or proportion) of rows in a table, the overall
*query* tends to be efficient if it evaluates that test first, using an
index.  semi-consistent read

A type of read operation used for `UPDATE' statements, that is a
combination of *read committed* and *consistent read*. When an `UPDATE'
statement examines a row that is already locked, InnoDB returns the
latest committed version to MySQL so that MySQL can determine whether
the row matches the `WHERE' condition of the `UPDATE'. If the row
matches (must be updated), MySQL reads the row again, and this time
InnoDB either locks it or waits for a lock on it. This type of read
operation can only happen when the transaction has the read committed
*isolation level*, or when the `innodb_locks_unsafe_for_binlog' option
is enabled.  SERIALIZABLE

The *isolation level* that uses the most conservative locking strategy,
to prevent any other transactions from inserting or changing data that
was read by this transaction, until it is finished. This way, the same
query can be run over and over within a transaction, and be certain to
retrieve the same set of results each time. Any attempt to change data
that was committed by another transaction since the start of the
current transaction, cause the current transaction to wait.

This is the default isolation level specified by the SQL standard. In
practice, this degree of strictness is rarely needed, so the default
isolation level for InnoDB is the next most strict, *repeatable read*.
server

A type of program that runs continuously, waiting to receive and act
upon requests from another program (the client). Because often an
entire computer is dedicated to running one or more server programs
(such as a database server, a web server, an application server, or
some combination of these), the term *server* can also refer to the
computer that runs the server software.  shared lock

A kind of *lock* that allows other *transactions* to read the locked
object, and to also acquire other shared locks on it, but not to write
to it. The opposite of *exclusive lock*.  shared tablespace

Another way of referring to the *system tablespace*.  sharp checkpoint

The process of *flushing* to disk all *dirty* buffer pool pages whose
redo entries are contained in certain portion of the *redo log*. Occurs
before InnoDB reuses a portion of a log file; the log files are used in
a circular fashion. Typically occurs with write-intensive *workloads*.
shutdown

The process of stopping the MySQL server. By default, this process does
cleanup operations for *InnoDB* tables, so it can *slow* to shut down,
but fast to start up later. If you skip the cleanup operations, it is
*fast* to shut down but must do the cleanup during the next restart.

The shutdown mode is controlled by the `innodb_fast_shutdown' option.
slave server

Frequently shortened to "slave". A database *server* machine in a
*replication* scenario that receives changes from another server (the
*master*) and applies those same changes. Thus it maintains the same
contents as the master, although it might lag somewhat behind.

In MySQL, slave servers are commonly used in disaster recovery, to take
the place of a master servers that fails. They are also commonly used
for testing software upgrades and new settings, to ensure that database
configuration changes do not cause problems with performance or
reliability.

Slave servers typically have high workloads, because they process all
the *DML* (write) operations relayed from the master, as well as user
queries. To ensure that slave servers can apply changes from the master
fast enough, they frequently have fast I/O devices and sufficient CPU
and memory to run multiple database instances on the same slave server.
For example, the master server might use hard drive storage while the
slave servers use *SSD*s.  slow query log

A type of *log* used for performance tuning of SQL statements processed
by the MySQL server. The log information is stored in a file. You must
enable this feature to use it. You control which categories of "slow"
SQL statements are logged. For more information, see *Note
slow-query-log::.

slow shutdown

A type of shutdown that does additional `InnoDB' flushing operations
before completing.  Also known as a *clean shutdown*.  Specified by the
configuration parameter `innodb_fast_shutdown=0' or the command `SET
GLOBAL innodb_fast_shutdown=0;'.  Although the shutdown itself can take
longer, that time will be saved on the subsequent startup.  snapshot

A representation of data at a particular time, which remains the same
even as changes are *committed* by other *transactions*. Used by certain
*isolation levels* to allow *consistent reads*.  space ID

An identifier used to uniquely identify an `InnoDB' *tablespace* within
a MySQL instance. The space ID for the *system tablespace* is always
zero; this same ID applies to all tables within the system tablespace.
Each tablespace file created in *file-per-table* mode also has its own
space ID.

Prior to MySQL 5.6, this hardcoded value presented difficulties in
moving `InnoDB' tablespace files between MySQL instances. Starting in
MySQL 5.6, you can copy tablespace files between instances by using the
*transportable tablespace* feature involving the statements `FLUSH
TABLES ... FOR EXPORT', `ALTER TABLE ... DISCARD TABLESPACE', and
`ALTER TABLE ... IMPORT TABLESPACE'. The information needed to adjust
the space ID is conveyed in the *.cfg file* which you copy along with
the tablespace. See Improved Tablespace Management
(http://dev.mysql.com/doc/refman/5.6/en/innodb-performance.html#innodb-tablespace-management)
for details.  spin

A type of *wait* operation that continuously tests whether a resource
becomes available. This technique is used for resources that are
typically held only for brief periods, where it is more efficient to
wait in a "busy loop" than to put the thread to sleep and perform a
context switch. If the resource does not become available within a short
time, the spin loop ceases and another wait technique is used.  SQL

The Structured Query Language that is standard for performing database
operations. Often divided into the categories *DDL*, *DML*, and
*queries*. MySQL includes some additional statement categories such as
*replication*. See *Note language-structure:: for the building blocks of
SQL syntax, *Note data-types:: for the data types to use for MySQL
table columns, *Note sql-syntax:: for details about SQL statements and
their associated categories, and *Note functions:: for standard and
MySQL-specific functions to use in queries.  SSD

Acronym for "solid-state drive". A type of storage device with
different performance characteristics than a traditional hard disk
drive (*HDD*): smaller storage capacity, faster for random reads, no
moving parts, and with a number of considerations affecting write
performance. Its performance characteristics can influence the
throughput of a *disk-bound* workload.  startup

The process of starting the MySQL server. Typically done by one of the
programs listed in *Note programs-server::. The opposite of *shutdown*.
statement-based replication

A form of *replication* where SQL statements are sent from the *master*
server and replayed on the *slave* server. It requires some care with
the setting for the `innodb_autoinc_lock_mode' option, to avoid
potential timing problems with *auto-increment locking*.  statistics

Estimated values relating to each `InnoDB' *table* and *index*, used to
construct an efficient *query execution plan*.  The main values are the
*cardinality* (number of distinct values) and the total number of table
rows or index entries. The statistics for the table represent the data
in its *primary key* index. The statistics for a *secondary index*
represent the rows covered by that index.

The values are estimated rather than counted precisely because at any
moment, different *transactions* can be inserting and deleting rows
from the same table. To keep the values from being recalculated
frequently, you can enable *persistent statistics*, where the values
are stored in `InnoDB' system tables, and refreshed only when you issue
an *Note `ANALYZE TABLE': analyze-table. statement.

You can control how *NULL* values are treated when calculating
statistics through the `innodb_stats_method' configuration option.

Other types of statistics are available for database objects and
database activity through the *INFORMATION_SCHEMA* and
*PERFORMANCE_SCHEMA* tables.  stemming

The ability to search for different variations of a word based on a
common root word, such as singular and plural, or past, present, and
future verb tense. This feature is currently supported in MyISAM
*full-text search* feature but not in *FULLTEXT indexes* for InnoDB
tables.  stopword

In a *FULLTEXT index*, a word that is considered common or trivial
enough that it is omitted from the *search index* and ignored in search
queries. Different configuration settings control stopword processing
for `InnoDB' and `MyISAM' tables. See *Note fulltext-stopwords:: for
details.  storage engine

A component of the MySQL database that performs the low-level work of
storing, updating, and querying data. In MySQL 5.5 and higher, *InnoDB*
is the default storage engine for new tables, superceding MyISAM.
Different storage engines are designed with different tradeoffs between
factors such as memory usage versus disk usage, read speed versus write
speed, and speed versus robustness. Each storage engine manages
specific tables, so we refer to *Note `InnoDB': innodb-storage-engine.
tables, *Note `MyISAM': myisam-storage-engine. tables, and so on.

The *MySQL Enterprise Backup* product is optimized for backing up
InnoDB tables. It can also back up tables handled by MyISAM and other
storage engines.  strict mode

The general name for the setting controlled by the `innodb_strict_mode'
option.  Turning on this setting causes certain conditions that are
normally treated as warnings, to be considered errors. For example,
certain invalid combinations of options related to *file format* and
*row format*, that normally produce a warning and continue with default
values, now cause the `CREATE TABLE' operation to fail.

MySQL also has something called strict mode.  sublist

Within the list structure that represents the buffer pool, pages that
are relatively old and relatively new are represented by different
portions of the list. A set of parameters control the size of these
portions and the dividing point between the new and old pages.
supremum record

A *pseudo-record* in an index, representing the *gap* above the largest
value in that index. If a transaction has a statement such as `SELECT
... FOR UPDATE ... WHERE col > 10;', and the largest value in the
column is 20, it is a lock on the supremum record that prevents other
transactions from inserting even larger values such as 50, 100, and so
on.  surrogate key

Synonym name for *synthetic key*.  synthetic key

A indexed column, typically a *primary key*, where the values are
assigned arbitrarily. Often done using an *auto-increment* column. By
treating the value as completely arbitrary, you can avoid overly
restrictive rules and faulty application assumptions. For example, a
numeric sequence representing employee numbers might have a gap if an
employee was approved for hiring but never actually joined. Or employee
number 100 might have a later hiring date than employee number 500, if
they left the company and later rejoined. Numeric values also produce
shorter values of predictable length. For example, storing numeric
codes meaning "Road", "Boulevard", "Expressway", and so on is more
space-efficient than repeating those strings over and over.

Also known as a *surrogate key*.  Contrast with *natural key*.  system
tablespace

A small set of data files (the *ibdata* files) containing the metadata
for InnoDB-related objects (the *data dictionary*), and the storage
areas for the *undo log*, the *change buffer*, and the *doublewrite
buffer*. Depending on the setting of the `innodb_file_per_table', when
tables are created, it might also contain table and index data for some
or all InnoDB tables. The data and metadata in the system tablespace
apply to all the *databases* in a MySQL *instance*.

Prior to MySQL 5.6.7, the default was to keep all InnoDB tables and
indexes inside the system tablespace, often causing this file to become
very large. Because the system tablespace never shrinks, storage
problems could arise if large amounts of temporary data were loaded and
then deleted. In MySQL 5.6.7 and higher, the default is
*file-per-table* mode, where each table and its associated indexes are
stored in a separate *.ibd file*. This new default makes it easier to
use InnoDB features that rely on the *Barracuda* file format, such as
table *compression* and the *DYNAMIC* row format.

In MySQL 5.6 and higher, setting a value for the
`innodb_undo_tablespaces'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_undo_tablespaces)
option splits the *undo log* into one or more separate tablespace
files. These files are still considered part of the system tablespace.

Keeping all table data in the system tablespace or in separate `.ibd'
files has implications for storage management in general. The *MySQL
Enterprise Backup* product might back up a small set of large files, or
many smaller files. On systems with thousands of tables, the filesystem
operations to process thousands of `.ibd' files can cause bottlenecks.

table

Each MySQL table is associated with a particular *storage engine*.
*InnoDB* tables have particular *physical* and *logical*
characteristics that affect performance, *scalability*, *backup*,
administration, and application development.

In terms of file storage, each InnoDB table is either part of the
single big InnoDB *system tablespace*, or in a separate *`.ibd'* file if
the table is created in *file-per-table* mode. The *`.ibd'* file holds
data for the table and all its *indexes*, and is known as a
*tablespace*.

InnoDB tables created in file-per-table mode can use the *Barracuda*
file format.  Barracuda tables can use the *DYNAMIC row format* or the
*COMPRESSED row format*. These relatively new settings enable a number
of InnoDB features, such as *compression*, *fast index creation*, and
*off-page columns*

For backward compatibility with MySQL 5.1 and earlier, InnoDB tables
inside the system tablespace must use the *Antelope* file format, which
supports the *compact row format* and the *redundant row format*.

The *rows* of an InnoDB table are organized into an index structure
known as the *clustered index*, with entries sorted based on the
*primary key* columns of the table. Data access is optimized for
queries that filter and sort on the primary key columns, and each index
contains a copy of the associated primary key columns for each entry.
Modifying values for any of the primary key columns is an expensive
operation. Thus an important aspect of InnoDB table design is choosing
a primary key with columns that are used in the most important queries,
and keeping the primary key short, with rarely changing values.  table
lock

A lock that prevents any other *transaction* from accessing a table.
InnoDB makes considerable effort to make such locks unnecessary, by
using techniques such as *online DDL*, *row locks* and *consistent
reads* for processing *DML* statements and *queries*. You can create
such a lock through SQL using the `LOCK TABLE' statement; one of the
steps in migrating from other database systems or MySQL storage engines
is to remove such statements wherever practical.  table scantable
statisticstable type

Obsolete synonym for *storage engine*. We refer to *Note `InnoDB':
innodb-storage-engine. tables, *Note `MyISAM': myisam-storage-engine.
tables, and so on.  tablespace

A data file that can hold data for one or more InnoDB *tables* and
associated *indexes*. The *system tablespace* contains the tables that
make up the *data dictionary*, and prior to MySQL 5.6 holds all the
other InnoDB tables by default. Turning on the `innodb_file_per_table'
option, the default in MySQL 5.6 and higher, allows newly created tables
to each have their own tablespace, with a separate *data file* for each
table.

Using multiple tablespaces, by turning on the `innodb_file_per_table'
option, is vital to using many MySQL features such as table compression
and transportable tablespaces, and managing disk usage. See *Note
innodb-multiple-tablespaces:: and Improved Tablespace Management
(http://dev.mysql.com/doc/refman/5.6/en/innodb-performance.html#innodb-tablespace-management)
for details.

Tablespaces created by the built-in InnoDB storage engine are upward
compatible with the InnoDB Plugin. Tablespaces created by the InnoDB
Plugin are downward compatible with the built-in InnoDB storage engine,
if they use the *Antelope* file format.

MySQL Cluster also groups its tables into tablespaces. See *Note
mysql-cluster-disk-data-objects:: for details.  tablespace dictionary

A representation of the *data dictionary* metadata for a table, within
the InnoDB *tablespace*. This metadata can be checked against the *.frm
file* for consistency when the table is opened, to diagnose errors
resulting from out-of-date `.frm' files. This information is present for
InnoDB tables that are part of the *system tablespace*, as well as for
tables that have their own *.ibd file* because of the *file-per-table*
option.  temporary table

A table whose data does not need to be truly permanent. For example,
temporary tables might be used as storage areas for intermediate
results in complicated calculations or transformations; this
intermediate data would not need to be recovered after a crash.
Database products can take various shortcuts to improve the performance
of operations on temporary tables, by being less scrupulous about
writing data to disk and other measures to protect the data across
restarts.

Sometimes, the data itself is removed automatically at a set time, such
as when the transaction ends or when the session ends. With some
database products, the table itself is removed automatically too.
temporary tablespace

The tablespace for non-compressed `InnoDB' temporary tables and related
objects. This tablespace was introduced in MySQL 5.7.1. The
configuration file option, `innodb_temp_data_file_path'
(http://dev.mysql.com/doc/refman/5.7/en/innodb-parameters.html#sysvar_innodb_temp_data_file_path),
allows users to define a relative path for the temporary data file. If
`innodb_temp_data_file_path'
(http://dev.mysql.com/doc/refman/5.7/en/innodb-parameters.html#sysvar_innodb_temp_data_file_path)
is not specified, the default behavior is to create a single
auto-extending 12MB data file named `ibtmp1' in the data directory,
alongside `ibdata1'.  The temporary tablespace is recreated on each
server start and receives a dynamically generated space-id, which helps
avoid conflicts with existing space-ids. The temporary tablespace
cannot reside on a raw device. Inability or error creating the
temporary table is treated as fatal and server startup will be refused.

The tablespace is removed on normal shutdown or on init abort, which
may occur when a user specifies the wrong startup options, for example.
The temporary tablespace is not removed when a crash occurs. In this
case, the database administrator can remove the tablespace manually or
restart the server with the same configuration, which will remove and
recreate the temporary tablespace.  text collection

The set of columns included in a *FULLTEXT index*.  thread

A unit of processing that is typically more lightweight than a
*process*, allowing for greater *concurrency*.  torn page

An error condition that can occur due to a combination of I/O device
configuration and hardware failure. If data is written out in chunks
smaller than the InnoDB *page size* (by default, 16KB), a hardware
failure while writing could result in only part of a page being stored
to disk. The InnoDB *doublewrite buffer* guards against this
possibility.  TPS

Acronym for "*transactions* per second", a unit of measurement
sometimes used in benchmarks. Its value depends on the *workload*
represented by a particular benchmark test, combined with factors that
you control such as the hardware capacity and database configuration.
transaction

Transactions are atomic units of work that can be committed or rolled
back. When a transaction makes multiple changes to the database, either
all the changes succeed when the transaction is committed, or all the
changes are undone when the transaction is rolled back.

Database transactions, as implemented by InnoDB, have properties that
are collectively known by the acronym *ACID*, for atomicity,
consistency, isolation, and durability.  transaction ID

An internal field associated with each row. This field is physically
changed by INSERT, UPDATE, and DELETE operations to record which
transaction has locked the row.  transportable tablespace

A feature that allows a *tablespace* to be moved from one instance to
another. Traditionally, this has not been possible for InnoDB
tablespaces because all table data was part of the *system tablespace*.
In MySQL 5.6 and higher, the *Note `FLUSH TABLES ... FOR EXPORT':
flush. syntax prepares an InnoDB table for copying to another server;
running *Note `ALTER TABLE ... DISCARD TABLESPACE': alter-table. and
*Note `ALTER TABLE ... IMPORT TABLESPACE': alter-table. on the other
server brings the copied data file into the other instance. A separate
`.cfg' file, copied along with the *.ibd file*, is used to update the
table metadata (for example the *space ID*) as the tablespace is
imported. See Improved Tablespace Management
(http://dev.mysql.com/doc/refman/5.6/en/innodb-performance.html#innodb-tablespace-management)
for usage information.  .TRG file

A file containing *trigger* parameters. Files with this extension are
always included in backups produced by the `mysqlbackup' command of the
*MySQL Enterprise Backup* product.  .TRN file

A file containing trigger namespace information. Files with this
extension are always included in backups produced by the `mysqlbackup'
command of the *MySQL Enterprise Backup* product.  troubleshooting

Resources for troubleshooting InnoDB reliability and performance issues
include: the Information Schema tables.  truncate

A *DDL* operation that removes the entire contents of a table, while
leaving the table and related indexes intact. Contrast with *drop*.
Although conceptually it has the same result as a `DELETE' statement
with no `WHERE' clause, it operates differently behind the scenes:
InnoDB creates a new empty table, drops the old table, then renames the
new table to take the place of the old one. Because this is a DDL
operation, it cannot be *rolled back*.

If the table being truncated contains foreign keys that reference
another table, the truncation operation uses a slower method of
operation, deleting one row at a time so that corresponding rows in the
referenced table can be deleted as needed by any `ON DELETE CASCADE'
clause.  (MySQL 5.5 and higher do not allow this slower form of
truncate, and return an error instead if foreign keys are involved. In
this case, use a `DELETE' statement instead.  tuple

A technical term designating an ordered set of elements. It is an
abstract notion, used in formal discussions of database theory. In the
database field, tuples are usually represented by the columns of a
table row. They could also be represented by the result sets of
queries, for example, queries that retrieved only some columns of a
table, or columns from joined tables.  two-phase commit

An operation that is part of a distributed *transaction*, under the
*XA* specification. (Sometimes abbreviated as 2PC.) When multiple
databases participate in the transaction, either all databases *commit*
the changes, or all databases *roll back* the changes.

undo

Data that is maintained throughout the life of a *transaction*,
recording all changes so that they can be undone in case of a
*rollback* operation. It is stored in the *undo log*, also known as the
*rollback segment*, either within the *system tablespace* or in
separate *undo tablespaces*.  undo bufferundo log

A storage area that holds copies of data modified by active
*transactions*. If another transaction needs to see the original data
(as part of a *consistent read* operation), the unmodified data is
retrieved from this storage area.

By default, this area is physically part of the *system tablespace*. In
MySQL 5.6 and higher, you can use the `innodb_undo_tablespaces'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_undo_tablespaces)
and `innodb_undo_directory'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_undo_directory)
configuration options to split it into one or more separate
*tablespace* files, the *undo tablespaces*, optionally stored on
another storage device such as an *SSD*.

The undo log is split into separate portions, the *insert undo buffer*
and the *update undo buffer*.  Collectively, these parts are also known
as the *rollback segment*, a familiar term for Oracle DBAs.  undo
tablespace

One of a set of files containing the *undo log*, when the undo log is
separated from the *system tablespace* by the `innodb_undo_tablespaces'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_undo_tablespaces)
and `innodb_undo_directory'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_undo_directory)
configuration options. Only applies to MySQL 5.6 and higher.  unique
constraint

A kind of *constraint* that asserts that a column cannot contain any
duplicate values. In terms of *relational* algebra, it is used to
specify 1-to-1 relationships. For efficiency in checking whether a
value can be inserted (that is, the value does not already exist in the
column), a unique constraint is supported by an underlying *unique
index*.  unique index

An index on a column or set of columns that have a *unique constraint*.
Because the index is known not to contain any duplicate values, certain
kinds of lookups and count operations are more efficient than in the
normal kind of index. Most of the lookups against this type of index
are simply to determine if a certain value exists or not. The number of
values in the index is the same as the number of rows in the table, or
at least the number of rows with non-null values for the associated
columns.

The *insert buffering* optimization does not apply to unique indexes.
As a workaround, you can temporarily set `unique_checks=0' while doing
a bulk data load into an InnoDB table.  unique key

The set of columns (one or more) comprising a *unique index*. When you
can define a `WHERE' condition that matches exactly one row, and the
query can use an associated unique index, the lookup and error handling
can be performed very efficiently.

victim

The transaction that is automatically chosen to be rolled back when a
*deadlock* is detected.  InnoDB rolls back the transaction that has
updated the fewest rows.

wait

When an operation, such as acquiring a *lock*, *mutex*, or *latch*,
cannot be completed immediately, InnoDB pauses and tries again. The
mechanism for pausing is elaborate enough that this operation has its
own name, the *wait*. Individual threads are paused using a combination
of internal InnoDB scheduling, operating system `wait()' calls, and
short-duration *spin* loops.

On systems with heavy load and many transactions, you might use the
output from the `SHOW INNODB STATUS' command to determine whether
threads are spending too much time waiting, and if so, how you can
improve *concurrency*.  warm backup

A *backup* taken while the database is running, but that restricts some
database operations during the backup process. For example, tables
might become read-only. For busy applications and web sites, you might
prefer a *hot backup*.  warm up

To run a system under a typical *workload* for some time after startup,
so that the *buffer pool* and other memory regions are filled as they
would be under normal conditions.

This process happens naturally over time when a MySQL server is
restarted or subjected to a new workload. Starting in MySQL 5.6, you
can speed up the warmup process by setting the configuration variables
`innodb_buffer_pool_dump_at_shutdown=ON'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_buffer_pool_dump_at_shutdown)
and `innodb_buffer_pool_load_at_startup=ON'
(http://dev.mysql.com/doc/refman/5.6/en/innodb-parameters.html#sysvar_innodb_buffer_pool_load_at_startup),
to bring the contents of the buffer pool back into memory after a
restart. Typically, you run a workload for some time to warm up the
buffer pool before running performance tests, to ensure consistent
results across multiple runs; otherwise, performance might be
artificially low during the first run.  Windows

The built-in *InnoDB* storage engine and the InnoDB *Plugin* are
supported on all the same Microsoft Windows versions as the MySQL
server. The *MySQL Enterprise Backup* product has more comprehensive
support for Windows systems than the *InnoDB Hot Backup* product that
it supersedes.  workload

The combination and volume of *SQL* and other database operations,
performed by a database application during typical or peak usage. You
can subject the database to a particular workload during performance
testing to identify *bottlenecks*, or during capacity planning.  write
combining

An optimization technique that reduces write operations when *dirty
pages* are *flushed* from the InnoDB *buffer pool*. If a row in a page
is updated multiple times, or multiple rows on the same page are
updated, all of those changes are stored to the data files in a single
write operation rather than one write for each change.

XA

A standard interface for coordinating distributed *transactions*,
allowing multiple databases to participate in a transaction while
maintaining *ACID* compliance. For full details, see *Note xa::.

XA Distributed Transaction support is turned on by default. If you are
not using this feature, you can disable the `innodb_support_xa'
configuration option, avoiding the performance overhead of an extra
fsync for each transaction.

young

A characteristic of a *page* in the `InnoDB' *buffer pool* meaning it
has been accessed recently, and so is moved within the buffer pool data
structure, so that it will not be *flushed* soon by the *LRU*
algorithm. This term is used in some *information schema* column names
of tables related to the buffer pool.

[index]
* Menu:

* ! (logical NOT):                       logical-operators.  (line   29)
* != (not equal):                        comparison-operators.
                                                             (line   91)
* ":                                     identifiers.        (line   20)
* #mysql50 identifier prefix <1>:        identifier-mapping. (line   88)
* #mysql50 identifier prefix:            identifiers.        (line  105)
* %:                                     arithmetic-functions.
                                                             (line  130)
* % (modulo):                            mathematical-functions.
                                                             (line  301)
* % (wildcard character):                string-literals.    (line   77)
* & (bitwise AND):                       bit-functions.      (line   29)
* && (logical AND):                      logical-operators.  (line   48)
* () (parentheses):                      operator-precedence.
                                                             (line   48)
* (Control+Z) \Z <1>:                    load-data.          (line  414)
* (Control+Z) \Z:                        string-literals.    (line   75)
* * (multiplication):                    arithmetic-functions.
                                                             (line   83)
* + (addition):                          arithmetic-functions.
                                                             (line   55)
* - (subtraction):                       arithmetic-functions.
                                                             (line   62)
* - (unary minus):                       arithmetic-functions.
                                                             (line   69)
* -? option (MySQL Cluster programs):    mysql-cluster-program-options-common.
                                                             (line   82)
* -c option (MySQL Cluster programs):    mysql-cluster-program-options-common.
                                                             (line  108)
* -c option (ndb_mgmd) (OBSOLETE):       mysql-cluster-programs-ndb-mgmd.
                                                             (line  203)
* -d option (ndb_index_stat):            mysql-cluster-programs-ndb-index-stat.
                                                             (line  121)
* -d option (ndb_mgmd):                  mysql-cluster-programs-ndb-mgmd.
                                                             (line  254)
* -disable option prefix:                option-modifiers.   (line    6)
* -e option (ndb_mgm):                   mysql-cluster-programs-ndb-mgm.
                                                             (line   48)
* -enable option prefix:                 option-modifiers.   (line    6)
* -f option (ndb_mgmd):                  mysql-cluster-programs-ndb-mgmd.
                                                             (line  203)
* -l option (ndbinfo_select_all):        mysql-cluster-programs-ndbinfo-select-all.
                                                             (line  102)
* -loose option prefix:                  option-modifiers.   (line    6)
* -maximum option prefix:                option-modifiers.   (line    6)
* -n option (ndbd):                      mysql-cluster-programs-ndbd.
                                                             (line  293)
* -n option (ndbmtd):                    mysql-cluster-programs-ndbd.
                                                             (line  293)
* -p option:                             password-security-user.
                                                             (line   17)
* -P option (ndb_mgmd):                  mysql-cluster-programs-ndb-mgmd.
                                                             (line  365)
* -password option:                      password-security-user.
                                                             (line   17)
* -skip option prefix:                   option-modifiers.   (line    6)
* -V option (MySQL Cluster programs):    mysql-cluster-program-options-common.
                                                             (line  216)
* .ARM file:                             glossary.           (line  112)
* .ARZ file:                             glossary.           (line  116)
* .cfg file:                             glossary.           (line  408)
* .frm file:                             glossary.           (line 1160)
* .ibd file:                             glossary.           (line 1360)
* .ibz file:                             glossary.           (line 1402)
* .isl file:                             glossary.           (line 1650)
* .MRG file:                             glossary.           (line 1934)
* .my.cnf file <1>:                      access-denied.      (line  101)
* .my.cnf file <2>:                      password-security-user.
                                                             (line   56)
* .my.cnf file <3>:                      multiple-server-clients.
                                                             (line   34)
* .my.cnf file <4>:                      option-files.       (line    6)
* .my.cnf file:                          connecting.         (line  227)
* .MYD file:                             glossary.           (line 1966)
* .MYI file:                             glossary.           (line 1968)
* .mysql_history file <1>:               password-security-user.
                                                             (line   88)
* .mysql_history file:                   mysql-logging.      (line    6)
* .NET, and ODBC:                        connector-odbc-examples-programming-net.
                                                             (line   11)
* .OPT file:                             glossary.           (line 2176)
* .PAR file:                             glossary.           (line 2268)
* .pid (process ID) file:                myisam-maintenance-schedule.
                                                             (line   17)
* .TRG file:                             glossary.           (line 3188)
* .TRN file:                             glossary.           (line 3192)
* / (division):                          arithmetic-functions.
                                                             (line   98)
* /etc/passwd <1>:                       select-into.        (line   47)
* /etc/passwd:                           security-against-attack.
                                                             (line   84)
* := (assignment operator):              assignment-operators.
                                                             (line   15)
* := (assignment):                       user-variables.     (line    6)
* < (less than):                         comparison-operators.
                                                             (line  109)
* << (left shift) <1>:                   bit-functions.      (line   51)
* << (left shift):                       calculating-days.   (line    6)
* <= (less than or equal):               comparison-operators.
                                                             (line  102)
* <=> (equal to):                        comparison-operators.
                                                             (line   79)
* <> (not equal):                        comparison-operators.
                                                             (line   91)
* = (assignment operator):               assignment-operators.
                                                             (line   70)
* = (assignment):                        user-variables.     (line    6)
* = (equal):                             comparison-operators.
                                                             (line   64)
* > (greater than):                      comparison-operators.
                                                             (line  123)
* >= (greater than or equal):            comparison-operators.
                                                             (line  116)
* >> (right shift):                      bit-functions.      (line   63)
* [api] (MySQL Cluster):                 mysql-cluster-params-api.
                                                             (line    6)
* [computer] (MySQL Cluster):            mysql-cluster-params-other.
                                                             (line    6)
* [mgm] (MySQL Cluster):                 mysql-cluster-params-mgmd.
                                                             (line    6)
* [mysqld] (MySQL Cluster):              mysql-cluster-params-api.
                                                             (line    6)
* [ndb_mgmd] (MySQL Cluster):            mysql-cluster-params-mgmd.
                                                             (line    6)
* [ndbd default] (MySQL Cluster):        mysql-cluster-params-ndbd.
                                                             (line    6)
* [ndbd] (MySQL Cluster):                mysql-cluster-params-ndbd.
                                                             (line    6)
* [sci] (MySQL Cluster):                 mysql-cluster-params-other.
                                                             (line    6)
* [shm] (MySQL Cluster):                 mysql-cluster-params-other.
                                                             (line    6)
* [tcp] (MySQL Cluster):                 mysql-cluster-params-other.
                                                             (line    6)
* \" (double quote):                     string-literals.    (line   70)
* \' (single quote):                     string-literals.    (line   69)
* \. (mysql client command) <1>:         mysql-batch-commands.
                                                             (line    6)
* \. (mysql client command):             batch-mode.         (line   90)
* \0 (ASCII NUL) <1>:                    load-data.          (line  409)
* \0 (ASCII NUL):                        string-literals.    (line   68)
* \\ (escape):                           string-literals.    (line   76)
* \b (backspace) <1>:                    load-data.          (line  410)
* \b (backspace):                        string-literals.    (line   71)
* \n (linefeed) <1>:                     load-data.          (line  411)
* \n (linefeed):                         string-literals.    (line   72)
* \n (newline) <1>:                      load-data.          (line  411)
* \n (newline):                          string-literals.    (line   72)
* \N (NULL):                             load-data.          (line  415)
* \r (carriage return) <1>:              load-data.          (line  412)
* \r (carriage return):                  string-literals.    (line   73)
* \t (tab) <1>:                          load-data.          (line  413)
* \t (tab):                              string-literals.    (line   74)
* \Z (Control+Z) ASCII 26 <1>:           load-data.          (line  414)
* \Z (Control+Z) ASCII 26:               string-literals.    (line   75)
* ^ (bitwise XOR):                       bit-functions.      (line   38)
* _ (wildcard character):                string-literals.    (line   78)
* _rowid:                                create-table.       (line  437)
* `:                                     identifiers.        (line   20)
* abort-slave-event-count option, mysqld: replication-options-slave.
                                                             (line   34)
* aborted clients:                       communication-errors.
                                                             (line    6)
* aborted connection:                    communication-errors.
                                                             (line    6)
* ABS():                                 mathematical-functions.
                                                             (line   52)
* access control:                        connection-access.  (line    6)
* access denied errors:                  error-access-denied.
                                                             (line    6)
* access privileges:                     privilege-system.   (line   16)
* account names:                         account-names.      (line    6)
* accounts, adding privileges:           adding-users.       (line    6)
* accounts, anonymous user:              default-privileges. (line    6)
* accounts, default:                     default-privileges. (line    6)
* accounts, root:                        default-privileges. (line    6)
* ACID <1>:                              glossary.           (line   13)
* ACID <2>:                              innodb-storage-engine.
                                                             (line   24)
* ACID:                                  ansi-diff-transactions.
                                                             (line    6)
* ACLs:                                  privilege-system.   (line   16)
* ACOS():                                mathematical-functions.
                                                             (line   64)
* action option, MySQLInstallerConsole:  MySQLInstallerConsole.
                                                             (line   53)
* activating plugins:                    server-plugin-loading.
                                                             (line    6)
* Active Server Pages (ASP):             connector-odbc-usagenotes-apptips-microsoft-asp.
                                                             (line    6)
* ActiveState Perl:                      activestate-perl.   (line    6)
* adaptive flushing:                     glossary.           (line   46)
* adaptive hash index <1>:               glossary.           (line   55)
* adaptive hash index <2>:               innodb-other-changes-innodb_adaptive_hash_index.
                                                             (line    6)
* adaptive hash index <3>:               innodb-performance-adaptive_hash_index.
                                                             (line    6)
* adaptive hash index:                   innodb-adaptive-hash.
                                                             (line    6)
* add-drop-database option, mysqldump:   mysqldump.          (line  409)
* add-drop-table option, mysqldump:      mysqldump.          (line  418)
* add-drop-trigger option, mysqldump:    mysqldump.          (line  423)
* add-locks option, mysqldump:           mysqldump.          (line  434)
* ADDDATE():                             date-and-time-functions.
                                                             (line  147)
* adding, character sets:                adding-character-set.
                                                             (line   12)
* adding, native functions:              adding-native-function.
                                                             (line    6)
* adding, new account privileges:        adding-users.       (line    6)
* adding, new functions:                 adding-functions.   (line   12)
* adding, new user privileges:           adding-users.       (line    6)
* adding, new users:                     unix-postinstallation.
                                                             (line  356)
* adding, user-defined functions:        adding-udf.         (line   15)
* addition (+):                          arithmetic-functions.
                                                             (line   55)
* ADDTIME():                             date-and-time-functions.
                                                             (line  165)
* addtodest option, mysqlhotcopy:        mysqlhotcopy.       (line   88)
* administration of MySQL Cluster:       mysql-cluster-programs-ndb-mgm.
                                                             (line    6)
* administration, server:                mysqladmin.         (line    6)
* administrative programs:               programs-overview.  (line  147)
* ADO.NET:                               connector-net-visual-studio-entity-framework.
                                                             (line    6)
* AES_DECRYPT():                         encryption-functions.
                                                             (line  102)
* AES_ENCRYPT():                         encryption-functions.
                                                             (line  108)
* After create, thread state:            general-thread-states.
                                                             (line   11)
* age, calculating:                      date-calculations.  (line    6)
* AHI:                                   glossary.           (line   81)
* AIO:                                   glossary.           (line   83)
* alias names, case sensitivity:         identifier-case-sensitivity.
                                                             (line    6)
* aliases, for expressions:              group-by-extensions.
                                                             (line   83)
* aliases, for tables:                   select.             (line  162)
* aliases, in GROUP BY clauses:          group-by-extensions.
                                                             (line   83)
* aliases, names:                        identifiers.        (line   13)
* aliases, on expressions:               select.             (line  108)
* ALL <1>:                               all-subqueries.     (line    6)
* ALL:                                   select.             (line  363)
* ALL join type, optimizer:              explain-output.     (line  385)
* all-databases option, mysqlcheck:      mysqlcheck.         (line  202)
* all-databases option, mysqldump:       mysqldump.          (line  441)
* all-in-1 option, mysqlcheck:           mysqlcheck.         (line  208)
* all-tablespaces option, mysqldump:     mysqldump.          (line  447)
* allocating local table, thread state:  delayed-insert-thread-states.
                                                             (line   17)
* allow-keywords option, mysqldump:      mysqldump.          (line  455)
* allow-suspicious-udfs option, mysqld:  server-options.     (line   84)
* ALLOW_INVALID_DATES SQL mode:          server-sql-mode.    (line  113)
* allowold option, mysqlhotcopy:         mysqlhotcopy.       (line   93)
* ALTER COLUMN:                          alter-table.        (line  348)
* ALTER DATABASE:                        alter-database.     (line    6)
* ALTER EVENT:                           alter-event.        (line    6)
* ALTER EVENT, and replication:          replication-features-invoked.
                                                             (line   47)
* ALTER FUNCTION:                        alter-function.     (line    6)
* ALTER LOGFILE GROUP:                   alter-logfile-group.
                                                             (line    6)
* ALTER PROCEDURE:                       alter-procedure.    (line    6)
* ALTER SCHEMA:                          alter-database.     (line    6)
* ALTER SERVER:                          alter-server.       (line    6)
* ALTER TABLE <1>:                       alter-table-problems.
                                                             (line    6)
* ALTER TABLE:                           alter-table.        (line   12)
* ALTER TABLE, ROW_FORMAT:               innodb-row-format-specification.
                                                             (line    6)
* ALTER TABLESPACE:                      alter-tablespace.   (line    6)
* ALTER VIEW:                            alter-view.         (line    6)
* altering, database:                    alter-database.     (line    6)
* altering, schema:                      alter-database.     (line    6)
* ANALYSE(), PROCEDURE:                  procedure-analyse.  (line    8)
* analyze option, myisamchk:             myisamchk-other-options.
                                                             (line    9)
* analyze option, mysqlcheck:            mysqlcheck.         (line  214)
* ANALYZE TABLE:                         analyze-table.      (line    6)
* ANALYZE TABLE, and partitioning:       partitioning-maintenance.
                                                             (line    6)
* Analyzing, thread state:               general-thread-states.
                                                             (line   18)
* AND, bitwise:                          bit-functions.      (line   29)
* AND, logical:                          logical-operators.  (line   48)
* anonymous user <1>:                    request-access.     (line   26)
* anonymous user <2>:                    connection-access.  (line   25)
* anonymous user:                        default-privileges. (line    6)
* ANSI mode, running:                    ansi-mode.          (line    6)
* ansi option, mysqld:                   server-options.     (line  103)
* ANSI SQL mode:                         server-sql-mode.    (line   76)
* ANSI_QUOTES SQL mode:                  server-sql-mode.    (line  131)
* answering questions, etiquette:        mailing-list-use.   (line    6)
* Antelope:                              glossary.           (line   86)
* Antelope file format:                  innodb-file-format. (line   14)
* ANY:                                   any-in-some-subqueries.
                                                             (line    6)
* Apache:                                apache.             (line    6)
* API node (MySQL Cluster), defined:     mysql-cluster-basics.
                                                             (line    6)
* API nodes:                             mysql-cluster-mysqld.
                                                             (line    6)
* APIs:                                  connectors-apis.    (line   23)
* APIs, list of:                         packages.           (line    6)
* APIs, Perl:                            apis-perl.          (line    6)
* append option (ndb_restore):           mysql-cluster-programs-ndb-restore.
                                                             (line  527)
* application programming interface (API): glossary.         (line   96)
* apply:                                 glossary.           (line  100)
* apply-slave-statements option, mysqldump: mysqldump.       (line  460)
* apply_status table (OBSOLETE):         mysql-cluster-replication-schema.
                                                             (line   86)
* approximate-value literals:            precision-math.     (line   14)
* Arbitration:                           mysql-cluster-ndbd-definition.
                                                             (line 2228)
* ArbitrationDelay <1>:                  mysql-cluster-api-definition.
                                                             (line  140)
* ArbitrationDelay:                      mysql-cluster-mgm-definition.
                                                             (line  205)
* ArbitrationRank <1>:                   mysql-cluster-api-definition.
                                                             (line  116)
* ArbitrationRank:                       mysql-cluster-mgm-definition.
                                                             (line  170)
* ArbitrationTimeout:                    mysql-cluster-ndbd-definition.
                                                             (line 2211)
* arbitrator_validity_detail, ndbinfo table: mysql-cluster-ndbinfo-arbitrator-validity-detail.
                                                             (line    6)
* arbitrator_validity_summary, ndbinfo table: mysql-cluster-ndbinfo-arbitrator-validity-summary.
                                                             (line    6)
* ARCHIVE storage engine <1>:            archive-storage-engine.
                                                             (line    6)
* ARCHIVE storage engine:                storage-engines.    (line   22)
* Area() <1>:                            multipolygon-property-functions.
                                                             (line    8)
* Area():                                polygon-property-functions.
                                                             (line    8)
* argument processing:                   udf-arguments.      (line    6)
* arithmetic expressions:                arithmetic-functions.
                                                             (line   55)
* arithmetic functions:                  bit-functions.      (line    6)
* AS <1>:                                join.               (line    6)
* AS:                                    select.             (line  136)
* AsBinary():                            functions-to-convert-geometries-between-formats.
                                                             (line    9)
* ASCII():                               string-functions.   (line  105)
* ASIN():                                mathematical-functions.
                                                             (line   76)
* ASP.NET <1>:                           connector-net-programming-asp-provider.
                                                             (line    6)
* ASP.NET:                               connector-net-tutorials.
                                                             (line   18)
* assignment operator, :=:               assignment-operators.
                                                             (line   15)
* assignment operator, =:                assignment-operators.
                                                             (line   70)
* assignment operators:                  assignment-operators.
                                                             (line    6)
* AsText():                              functions-to-convert-geometries-between-formats.
                                                             (line   16)
* asynchronous I/O <1>:                  glossary.           (line  120)
* asynchronous I/O:                      innodb-performance-aio-linux.
                                                             (line    6)
* asynchronous replication:              mysql-cluster-replication.
                                                             (line   20)
* ATAN():                                mathematical-functions.
                                                             (line   99)
* ATAN2():                               mathematical-functions.
                                                             (line  109)
* atomic:                                glossary.           (line  132)
* atomic instruction:                    glossary.           (line  137)
* attackers, security against:           security-against-attack.
                                                             (line    6)
* attribute demotion, replication:       replication-features-different-data-types.
                                                             (line    6)
* attribute promotion, ndb_restore:      mysql-cluster-programs-ndb-restore.
                                                             (line  259)
* attribute promotion, replication:      replication-features-different-data-types.
                                                             (line    6)
* audit log plugin,:                     audit-log-plugin.   (line   15)
* audit plugins:                         audit-plugins.      (line    6)
* audit-log option, mysqld:              audit-log-plugin-options-variables.
                                                             (line   15)
* audit_log_buffer_size system variable: audit-log-plugin-options-variables.
                                                             (line   65)
* audit_log_file system variable:        audit-log-plugin-options-variables.
                                                             (line  102)
* audit_log_flush system variable:       audit-log-plugin-options-variables.
                                                             (line  126)
* audit_log_policy system variable:      audit-log-plugin-options-variables.
                                                             (line  149)
* audit_log_rotate_on_size system variable: audit-log-plugin-options-variables.
                                                             (line  183)
* audit_log_strategy system variable:    audit-log-plugin-options-variables.
                                                             (line  216)
* authentication plugins:                authentication-plugins.
                                                             (line    6)
* AUTHENTICATION_PAM_LOG environment variable: pam-authentication-plugin-debugging.
                                                             (line    6)
* authentication_windows_log_level system variable: server-system-variables.
                                                             (line  638)
* authentication_windows_use_principal_name system variable: server-system-variables.
                                                             (line  673)
* auto-generate-sql option, mysqlslap:   mysqlslap.          (line  210)
* auto-generate-sql-add-autoincrement option, mysqlslap: mysqlslap.
                                                             (line  215)
* auto-generate-sql-execute-number option, mysqlslap: mysqlslap.
                                                             (line  219)
* auto-generate-sql-guid-primary option, mysqlslap: mysqlslap.
                                                             (line  223)
* auto-generate-sql-load-type option, mysqlslap: mysqlslap.  (line  227)
* auto-generate-sql-secondary-indexes option, mysqlslap: mysqlslap.
                                                             (line  234)
* auto-generate-sql-unique-query-number option, mysqlslap: mysqlslap.
                                                             (line  239)
* auto-generate-sql-unique-write-number option, mysqlslap: mysqlslap.
                                                             (line  247)
* auto-generate-sql-write-number option, mysqlslap: mysqlslap.
                                                             (line  252)
* auto-increment:                        glossary.           (line  140)
* auto-increment locking:                glossary.           (line  164)
* AUTO-INCREMENT, ODBC:                  connector-odbc-usagenotes-functionality-last-insert-id.
                                                             (line    6)
* auto-rehash option, mysql:             mysql-command-options.
                                                             (line  166)
* auto-repair option, mysqlcheck:        mysqlcheck.         (line  218)
* auto-vertical-output option, mysql:    mysql-command-options.
                                                             (line  180)
* AUTO_INCREMENT <1>:                    numeric-types.      (line   15)
* AUTO_INCREMENT:                        example-auto-increment.
                                                             (line    6)
* AUTO_INCREMENT, and NULL values:       problems-with-null. (line   71)
* AUTO_INCREMENT, and replication:       replication-features-auto-increment.
                                                             (line    6)
* auto_increment_increment system variable: replication-options-master.
                                                             (line   26)
* auto_increment_offset system variable: replication-options-master.
                                                             (line  223)
* autocommit:                            glossary.           (line  174)
* autocommit session variable:           server-system-variables.
                                                             (line  712)
* automatic_sp_privileges system variable: server-system-variables.
                                                             (line  764)
* AutoReconnect, API and SQL nodes:      mysql-cluster-api-definition.
                                                             (line  265)
* availability:                          glossary.           (line  182)
* AVG():                                 group-by-functions. (line   59)
* AVG(DISTINCT):                         group-by-functions. (line   59)
* B-tree:                                glossary.           (line  190)
* B-tree indexes <1>:                    innodb-physical-structure.
                                                             (line    6)
* B-tree indexes:                        index-btree-hash.   (line    6)
* back_log system variable:              server-system-variables.
                                                             (line  792)
* background threads, master <1>:        innodb-performance-adaptive_flushing.
                                                             (line    6)
* background threads, master:            innodb-performance-thread_io_rate.
                                                             (line    6)
* background threads, read:              innodb-performance-multiple_io_threads.
                                                             (line    6)
* background threads, write:             innodb-performance-multiple_io_threads.
                                                             (line    6)
* backslash, escape character:           string-literals.    (line    6)
* backspace (\b) <1>:                    load-data.          (line  410)
* backspace (\b):                        string-literals.    (line   71)
* backticks:                             glossary.           (line  204)
* backup:                                glossary.           (line  217)
* backup identifiers, native backup and restore: mysql-cluster-backup-using-management-client.
                                                             (line   94)
* backup option, myisamchk:              myisamchk-repair-options.
                                                             (line   10)
* backup option, myisampack:             myisampack.         (line   51)
* backup_path option (ndb_restore):      mysql-cluster-programs-ndb-restore.
                                                             (line  373)
* BackupDataBufferSize <1>:              mysql-cluster-backup-configuration.
                                                             (line    8)
* BackupDataBufferSize:                  mysql-cluster-ndbd-definition.
                                                             (line 2619)
* BackupDataDir:                         mysql-cluster-ndbd-definition.
                                                             (line  283)
* backupid option (ndb_restore):         mysql-cluster-programs-ndb-restore.
                                                             (line  328)
* BackupLogBufferSize <1>:               mysql-cluster-backup-configuration.
                                                             (line   13)
* BackupLogBufferSize:                   mysql-cluster-ndbd-definition.
                                                             (line 2640)
* BackupMaxWriteSize <1>:                mysql-cluster-backup-configuration.
                                                             (line   29)
* BackupMaxWriteSize:                    mysql-cluster-ndbd-definition.
                                                             (line 2726)
* BackupMemory <1>:                      mysql-cluster-backup-configuration.
                                                             (line   18)
* BackupMemory:                          mysql-cluster-ndbd-definition.
                                                             (line 2672)
* BackupReportFrequency:                 mysql-cluster-ndbd-definition.
                                                             (line 2693)
* backups <1>:                           mysql-enterprise-backup.
                                                             (line    6)
* backups:                               backup-and-recovery.
                                                             (line   15)
* backups, databases and tables <1>:     mysqlhotcopy.       (line    6)
* backups, databases and tables:         mysqldump.          (line    6)
* backups, in MySQL Cluster <1>:         mysql-cluster-backup-configuration.
                                                             (line    6)
* backups, in MySQL Cluster <2>:         mysql-cluster-backup-using-management-client.
                                                             (line    6)
* backups, in MySQL Cluster <3>:         mysql-cluster-backup-concepts.
                                                             (line    6)
* backups, in MySQL Cluster <4>:         mysql-cluster-backup.
                                                             (line   13)
* backups, in MySQL Cluster:             mysql-cluster-programs-ndb-restore.
                                                             (line    6)
* backups, in MySQL Cluster replication: mysql-cluster-replication-backups.
                                                             (line   11)
* backups, InnoDB:                       innodb-backup.      (line   12)
* backups, troubleshooting, in MySQL Cluster: mysql-cluster-backup-troubleshooting.
                                                             (line    6)
* backups, with mysqldump:               using-mysqldump.    (line   14)
* BackupWriteSize <1>:                   mysql-cluster-backup-configuration.
                                                             (line   24)
* BackupWriteSize:                       mysql-cluster-ndbd-definition.
                                                             (line 2712)
* Barracuda:                             glossary.           (line  232)
* Barracuda file format:                 innodb-file-format. (line   14)
* base64-output option, mysqlbinlog:     mysqlbinlog.        (line  170)
* BaseCommandInterceptor class:          connector-net-ref-mysqlclient-basecommandinterceptor.
                                                             (line    6)
* basedir option, mysql.server:          mysql-server.       (line   36)
* basedir option, mysql_install_db:      mysql-install-db.   (line   53)
* basedir option, mysql_plugin:          mysql-plugin.       (line   98)
* basedir option, mysql_upgrade:         mysql-upgrade.      (line  162)
* basedir option, mysqld:                server-options.     (line  116)
* basedir option, mysqld_safe:           mysqld-safe.        (line  115)
* basedir system variable:               server-system-variables.
                                                             (line  824)
* BaseExceptionInterceptor class:        connector-net-ref-mysqlclient-baseexceptioninterceptor.
                                                             (line    6)
* batch mode:                            batch-mode.         (line    6)
* batch option, mysql:                   mysql-command-options.
                                                             (line  187)
* batch SQL files:                       mysql.              (line   15)
* BatchByteSize:                         mysql-cluster-api-definition.
                                                             (line  154)
* batched updates (MySQL Cluster Replication): mysql-cluster-replication-starting.
                                                             (line   77)
* BatchSize:                             mysql-cluster-api-definition.
                                                             (line  176)
* BatchSizePerLocalScan:                 mysql-cluster-ndbd-definition.
                                                             (line  870)
* Bazaar tree:                           installing-development-tree.
                                                             (line    6)
* BdMPolyFromText():                     gis-wkt-functions.  (line   59)
* BdMPolyFromWKB():                      gis-wkb-functions.  (line   60)
* BdPolyFromText():                      gis-wkt-functions.  (line   65)
* BdPolyFromWKB():                       gis-wkb-functions.  (line   66)
* BEGIN <1>:                             begin-end.          (line    6)
* BEGIN:                                 commit.             (line    6)
* BEGIN, labels:                         statement-labels.   (line    6)
* BEGIN, XA transactions:                xa-statements.      (line    6)
* BENCHMARK():                           information-functions.
                                                             (line   33)
* benchmarks <1>:                        custom-benchmarks.  (line    6)
* benchmarks:                            mysql-benchmarks.   (line    6)
* beta:                                  glossary.           (line  247)
* BETWEEN ... AND:                       comparison-operators.
                                                             (line  198)
* big-tables option, mysqld:             server-options.     (line  136)
* big5:                                  faqs-cjk.           (line    6)
* big_tables session variable:           server-system-variables.
                                                             (line  845)
* BIGINT data type:                      numeric-type-overview.
                                                             (line  125)
* BIN():                                 string-functions.   (line  120)
* BINARY:                                cast-functions.     (line   13)
* BINARY data type <1>:                  binary-varbinary.   (line    6)
* BINARY data type:                      string-type-overview.
                                                             (line  151)
* binary distributions, installing:      binary-installation.
                                                             (line    6)
* binary log <1>:                        glossary.           (line  253)
* binary log:                            binary-log.         (line   13)
* binary log, event groups:              set-global-sql-slave-skip-counter.
                                                             (line    6)
* binary logging, and MySQL Cluster:     mysql-cluster-limitations-exclusive-to-cluster.
                                                             (line   22)
* bind-address option (ndb_mgmd):        mysql-cluster-programs-ndb-mgmd.
                                                             (line   95)
* bind-address option, mysql:            mysql-command-options.
                                                             (line  197)
* bind-address option, mysqladmin:       mysqladmin.         (line  314)
* bind-address option, mysqlbinlog:      mysqlbinlog.        (line  217)
* bind-address option, mysqlcheck:       mysqlcheck.         (line  223)
* bind-address option, mysqld:           server-options.     (line  159)
* bind-address option, mysqldump:        mysqldump.          (line  468)
* bind-address option, mysqlimport:      mysqlimport.        (line  131)
* bind-address option, mysqlshow:        mysqlshow.          (line  118)
* binlog:                                glossary.           (line  275)
* BINLOG:                                binlog.             (line    6)
* Binlog Dump, thread command:           thread-commands.    (line    8)
* BINLOG statement, mysqlbinlog output:  mysqlbinlog-row-events.
                                                             (line    6)
* binlog-do-db option, mysqld:           replication-options-binary-log.
                                                             (line  200)
* binlog-format option, mysqld:          server-options.     (line  216)
* binlog-ignore-db option, mysqld:       replication-options-binary-log.
                                                             (line  325)
* binlog-row-event-max-size option, mysqld: replication-options-binary-log.
                                                             (line   20)
* binlog_cache_size system variable:     replication-options-binary-log.
                                                             (line  440)
* binlog_direct_non_transactional_updates system variable: replication-options-binary-log.
                                                             (line  488)
* binlog_format system variable:         replication-options-binary-log.
                                                             (line  545)
* binlog_format system variable, MySQL Cluster: replication-options-binary-log.
                                                             (line  582)
* binlog_format, BLACKHOLE:              replication-features-blackhole.
                                                             (line    6)
* binlog_index table (OBSOLETE):         mysql-cluster-replication-schema.
                                                             (line    6)
* binlog_stmt_cache_size system variable: replication-options-binary-log.
                                                             (line  636)
* BIT data type:                         numeric-type-overview.
                                                             (line   35)
* bit functions:                         bit-functions.      (line    6)
* bit functions, example:                calculating-days.   (line    6)
* BIT_AND():                             group-by-functions. (line   70)
* BIT_COUNT:                             calculating-days.   (line    6)
* BIT_COUNT():                           bit-functions.      (line   84)
* BIT_LENGTH():                          string-functions.   (line  129)
* BIT_OR:                                calculating-days.   (line    6)
* BIT_OR():                              group-by-functions. (line   79)
* BIT_XOR():                             group-by-functions. (line   86)
* BLACKHOLE storage engine <1>:          blackhole-storage-engine.
                                                             (line    6)
* BLACKHOLE storage engine:              storage-engines.    (line   22)
* BLACKHOLE, binlog_format:              replication-features-blackhole.
                                                             (line    6)
* BLACKHOLE, replication:                replication-features-blackhole.
                                                             (line    6)
* blind query expansion:                 glossary.           (line  279)
* BLOB columns, default values:          blob.               (line   52)
* BLOB columns, indexing <1>:            create-table.       (line  489)
* BLOB columns, indexing:                column-indexes.     (line   18)
* BLOB columns, with Connector/Net:      connector-net-programming-blob.
                                                             (line   12)
* BLOB data type <1>:                    blob.               (line    6)
* BLOB data type:                        string-type-overview.
                                                             (line  180)
* BLOB, inserting binary data:           string-literals.    (line  141)
* BLOB, size:                            storage-requirements.
                                                             (line  190)
* blob-info option, ndb_desc:            mysql-cluster-programs-ndb-desc.
                                                             (line  280)
* Block Nested-Loop join algorithm:      nested-loop-joins.  (line    6)
* block-search option, myisamchk:        myisamchk-other-options.
                                                             (line   18)
* blocks, ndbinfo table:                 mysql-cluster-ndbinfo-blocks.
                                                             (line    6)
* BOOL data type:                        numeric-type-overview.
                                                             (line   45)
* BOOLEAN data type:                     numeric-type-overview.
                                                             (line   45)
* boolean options:                       option-modifiers.   (line    6)
* bootstrap option, mysqld:              server-options.     (line  251)
* Borland applications:                  connector-odbc-usagenotes-apptips-borland.
                                                             (line   12)
* bottleneck:                            glossary.           (line  287)
* bounce:                                glossary.           (line  297)
* Boundary():                            general-geometry-property-functions.
                                                             (line   70)
* brackets, square:                      data-types.         (line   42)
* brief option, mysqlaccess:             mysqlaccess.        (line   71)
* buddy allocator <1>:                   glossary.           (line  301)
* buddy allocator:                       innodb-information-schema-innodb_cmpmem.
                                                             (line    6)
* buffer:                                glossary.           (line  304)
* buffer pool <1>:                       glossary.           (line  312)
* buffer pool <2>:                       innodb-performance-midpoint_insertion.
                                                             (line    6)
* buffer pool:                           innodb-buffer-pool. (line    6)
* buffer pool instance:                  glossary.           (line  332)
* buffer sizes:                          innodb-buffer-pool. (line    6)
* buffer sizes, client:                  connectors-apis.    (line   23)
* buffer sizes, mysqld server:           server-parameters.  (line    6)
* Buffer():                              spatial-operators.  (line   11)
* bugs database:                         bug-reports.        (line    6)
* bugs, known:                           bugs.               (line    6)
* bugs, MySQL Cluster, reporting:        mysql-cluster-programs-ndb-error-reporter.
                                                             (line    6)
* bugs, reporting <1>:                   bug-reports.        (line    6)
* bugs, reporting:                       introduction.       (line   69)
* bugs.mysql.com:                        bug-reports.        (line    6)
* BUILD_CONFIG option, CMake:            source-configuration-options.
                                                             (line  189)
* BuildIndexThreads:                     mysql-cluster-ndbd-definition.
                                                             (line 2854)
* building, client programs:             c-api-building-clients.
                                                             (line    6)
* built-in:                              glossary.           (line  343)
* bulk loading, for InnoDB tables:       optimizing-innodb-bulk-data-loading.
                                                             (line    6)
* bulk loading, for MyISAM tables:       optimizing-myisam-bulk-data-loading.
                                                             (line    6)
* bulk loading, with Connector/Net:      connector-net-programming-bulk-loader.
                                                             (line    6)
* bulk_insert_buffer_size system variable: server-system-variables.
                                                             (line  860)
* business rules:                        glossary.           (line  353)
* C API:                                 connectors-apis.    (line   23)
* C API, data types:                     c-api.              (line   29)
* C API, example programs:               c-api-example-programs.
                                                             (line    6)
* C API, functions:                      c-api-function-overview.
                                                             (line    6)
* C API, linking problems:               c-api-building-clients.
                                                             (line   83)
* C prepared statement API, functions <1>: c-api-prepared-statement-function-overview.
                                                             (line    6)
* C prepared statement API, functions:   c-api-prepared-statement-type-conversions.
                                                             (line    6)
* C prepared statement API, type codes:  c-api-prepared-statement-type-codes.
                                                             (line    6)
* C# <1>:                                connector-net-ref.  (line   11)
* C#:                                    connector-net-tutorials-intro.
                                                             (line   14)
* C++ Builder:                           connector-odbc-usagenotes-apptips-borland-cppbuilder.
                                                             (line    6)
* C:\my.cnf file:                        multiple-server-clients.
                                                             (line   34)
* cache:                                 glossary.           (line  377)
* CACHE INDEX:                           cache-index.        (line    6)
* CACHE INDEX, and partitioning:         partitioning-limitations.
                                                             (line  254)
* caches, clearing:                      flush.              (line    6)
* calculating, aggregate value for a set of rows: group-by-functions.
                                                             (line    6)
* calculating, cardinality:              show-index.         (line   43)
* calculating, dates:                    date-calculations.  (line    6)
* calendar:                              mysql-calendar.     (line    6)
* CALL:                                  call.               (line    6)
* calling sequences for aggregate functions, UDF: udf-aggr-calling.
                                                             (line    6)
* calling sequences for simple functions, UDF: udf-calling.  (line    6)
* can't create/write to file:            cannot-create.      (line    6)
* cardinality <1>:                       glossary.           (line  381)
* cardinality:                           how-to-avoid-table-scan.
                                                             (line    6)
* carriage return (\r) <1>:              load-data.          (line  412)
* carriage return (\r):                  string-literals.    (line   73)
* CASE <1>:                              case.               (line    6)
* CASE:                                  control-flow-functions.
                                                             (line   14)
* case sensitivity, in access checking:  grant-table-structure.
                                                             (line  300)
* case sensitivity, in identifiers:      identifier-case-sensitivity.
                                                             (line    6)
* case sensitivity, in names:            identifier-case-sensitivity.
                                                             (line    6)
* case sensitivity, in searches:         case-sensitivity.   (line    6)
* case sensitivity, in string comparisons: string-comparison-functions.
                                                             (line   17)
* case sensitivity, of database names:   extensions-to-ansi. (line   38)
* case sensitivity, of replication filtering options: replication-rules.
                                                             (line   56)
* case sensitivity, of table names:      extensions-to-ansi. (line   38)
* CAST:                                  cast-functions.     (line   39)
* cast functions:                        cast-functions.     (line    6)
* cast operators:                        cast-functions.     (line    6)
* casts <1>:                             cast-functions.     (line    6)
* casts <2>:                             comparison-operators.
                                                             (line   38)
* casts:                                 type-conversion.    (line    6)
* catalog option, MySQLInstallerConsole: MySQLInstallerConsole.
                                                             (line   41)
* CC environment variable <1>:           environment-variables.
                                                             (line   18)
* CC environment variable:               compilation-problems.
                                                             (line   41)
* CEIL():                                mathematical-functions.
                                                             (line  121)
* CEILING():                             mathematical-functions.
                                                             (line  125)
* Centroid():                            multipolygon-property-functions.
                                                             (line   23)
* certificate file:                      connector-net-connection-options.
                                                             (line    6)
* CFLAGS environment variable <1>:       environment-variables.
                                                             (line   18)
* CFLAGS environment variable:           compilation-problems.
                                                             (line   41)
* cflags option, mysql_config:           mysql-config.       (line   13)
* change buffer:                         glossary.           (line  416)
* change buffering:                      glossary.           (line  448)
* change buffering, disabling:           innodb-performance-change_buffering.
                                                             (line    6)
* CHANGE MASTER TO:                      change-master-to.   (line    6)
* CHANGE MASTER TO, in MySQL Cluster:    mysql-cluster-replication-preparation.
                                                             (line   37)
* Change user, thread command:           thread-commands.    (line   13)
* ChangeLog:                             news.               (line    6)
* changes to privileges:                 privilege-changes.  (line    6)
* changes, release notes:                news.               (line    6)
* Changing master, thread state:         slave-connection-thread-states.
                                                             (line    9)
* changing, column:                      alter-table.        (line  348)
* changing, field:                       alter-table.        (line  348)
* changing, socket location <1>:         problems-with-mysql-sock.
                                                             (line   26)
* changing, socket location:             automatic-start.    (line  134)
* changing, table <1>:                   alter-table-problems.
                                                             (line    6)
* changing, table:                       alter-table.        (line   12)
* CHAR data type <1>:                    string-types.       (line   14)
* CHAR data type:                        string-type-overview.
                                                             (line   89)
* CHAR VARYING data type:                string-type-overview.
                                                             (line  121)
* CHAR():                                string-functions.   (line  136)
* CHAR_LENGTH():                         string-functions.   (line  178)
* CHARACTER data type:                   string-type-overview.
                                                             (line   89)
* character set repertoire:              charset-unicode-utf8.
                                                             (line   34)
* character sets:                        charset.            (line   23)
* character sets, adding:                adding-character-set.
                                                             (line   12)
* character sets, and replication:       replication-features-charset.
                                                             (line    6)
* character sets, repertoire:            charset-repertoire. (line    6)
* character sets, restrictions:          charset-restrictions.
                                                             (line    6)
* character sets, with Connector/J:      connector-j-reference-charsets.
                                                             (line    6)
* character sets, with Connector/Net:    connector-net-using-character-sets.
                                                             (line    6)
* CHARACTER VARYING data type:           string-type-overview.
                                                             (line  121)
* character-set-client-handshake option, mysqld: server-options.
                                                             (line  282)
* character-set-filesystem option, mysqld: server-options.   (line  299)
* character-set-server option, mysqld:   server-options.     (line  318)
* character-sets-dir option (MySQL Cluster programs): mysql-cluster-program-options-common.
                                                             (line   94)
* character-sets-dir option, myisamchk:  myisamchk-repair-options.
                                                             (line   14)
* character-sets-dir option, myisampack: myisampack.         (line   56)
* character-sets-dir option, mysql:      mysql-command-options.
                                                             (line  207)
* character-sets-dir option, mysqladmin: mysqladmin.         (line  324)
* character-sets-dir option, mysqlbinlog: mysqlbinlog.       (line  225)
* character-sets-dir option, mysqlcheck: mysqlcheck.         (line  233)
* character-sets-dir option, mysqld:     server-options.     (line  263)
* character-sets-dir option, mysqldump:  mysqldump.          (line  478)
* character-sets-dir option, mysqlimport: mysqlimport.       (line  141)
* character-sets-dir option, mysqlshow:  mysqlshow.          (line  128)
* CHARACTER_LENGTH():                    string-functions.   (line  185)
* character_set_client system variable:  server-system-variables.
                                                             (line  894)
* character_set_connection system variable: server-system-variables.
                                                             (line  934)
* character_set_database system variable: server-system-variables.
                                                             (line  950)
* character_set_filesystem system variable: server-system-variables.
                                                             (line  990)
* character_set_results system variable: server-system-variables.
                                                             (line 1018)
* character_set_server system variable:  server-system-variables.
                                                             (line 1034)
* character_set_system system variable:  server-system-variables.
                                                             (line 1052)
* CHARACTER_SETS, INFORMATION_SCHEMA table: character-sets-table.
                                                             (line    6)
* character_sets_dir system variable:    server-system-variables.
                                                             (line 1067)
* characters, multi-byte:                multi-byte-characters.
                                                             (line    6)
* charset command, mysql:                mysql-commands.     (line   61)
* charset option, comp_err:              comp-err.           (line   29)
* CHARSET():                             information-functions.
                                                             (line   79)
* check option, myisamchk:               myisamchk-check-options.
                                                             (line    9)
* check option, mysqlcheck:              mysqlcheck.         (line  238)
* check options, myisamchk:              myisamchk-check-options.
                                                             (line    6)
* CHECK TABLE:                           check-table.        (line    6)
* CHECK TABLE, and partitioning:         partitioning-maintenance.
                                                             (line    6)
* check-only-changed option, myisamchk:  myisamchk-check-options.
                                                             (line   14)
* check-only-changed option, mysqlcheck: mysqlcheck.         (line  242)
* check-orphans option, ndb_blob_tool:   mysql-cluster-programs-ndb-blob-tool.
                                                             (line   63)
* check-upgrade option, mysqlcheck:      mysqlcheck.         (line  247)
* Checking master version, thread state: slave-io-thread-states.
                                                             (line   20)
* checking permissions, thread state:    general-thread-states.
                                                             (line   23)
* checking privileges on cached query, thread state: query-cache-thread-states.
                                                             (line    9)
* checking query cache for query, thread state: query-cache-thread-states.
                                                             (line   14)
* Checking table, thread state:          general-thread-states.
                                                             (line   28)
* checking, tables for errors:           myisam-check.       (line    6)
* checkpoint:                            glossary.           (line  459)
* CHECKPOINT Events (MySQL Cluster):     mysql-cluster-log-events.
                                                             (line   39)
* checkpoint option, mysqlhotcopy:       mysqlhotcopy.       (line   98)
* checksum:                              glossary.           (line  465)
* Checksum <1>:                          mysql-cluster-sci-definition.
                                                             (line  169)
* Checksum:                              mysql-cluster-tcp-definition.
                                                             (line  150)
* Checksum (MySQL Cluster):              mysql-cluster-shm-definition.
                                                             (line  114)
* checksum errors:                       solaris-installation.
                                                             (line   11)
* CHECKSUM TABLE:                        checksum-table.     (line    6)
* child table:                           glossary.           (line  485)
* Chinese, Japanese, Korean character sets, frequently asked questions: faqs-cjk.
                                                             (line    6)
* choosing, a MySQL version:             which-version.      (line   18)
* choosing, data types:                  choosing-types.     (line    6)
* chroot option, mysqld:                 server-options.     (line  339)
* chroot option, mysqlhotcopy:           mysqlhotcopy.       (line  103)
* circular replication, in MySQL Cluster <1>: mysql-cluster-replication-conflict-resolution.
                                                             (line    6)
* circular replication, in MySQL Cluster <2>: mysql-cluster-replication-multi-master.
                                                             (line    6)
* circular replication, in MySQL Cluster: mysql-cluster-replication-issues.
                                                             (line   60)
* CJK (Chinese, Japanese, Korean), Access, PHP, etc.: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), availability of specific characters: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), big5: faqs-cjk.           (line    6)
* CJK (Chinese, Japanese, Korean), character sets available: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), characters displayed as question marks: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), CJKV: faqs-cjk.           (line    6)
* CJK (Chinese, Japanese, Korean), collations: faqs-cjk.     (line    6)
* CJK (Chinese, Japanese, Korean), conversion problems with Japanese character sets: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), data truncation: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), Database and table names: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), documentation in Chinese: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), documentation in Japanese: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), documentation in Korean: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), FAQ:  faqs-cjk.           (line    6)
* CJK (Chinese, Japanese, Korean), gb2312, gbk: faqs-cjk.    (line    6)
* CJK (Chinese, Japanese, Korean), Japanese character sets: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), Korean character set: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), LIKE and FULLTEXT: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), MySQL 4.0 behavior: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), ORDER BY treatment: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), problems with Access, PHP, etc.: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), problems with Big5 character sets (Chinese): faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), problems with data truncation: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), problems with euckr character set (Korean): faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), problems with GB character sets (Chinese): faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), problems with LIKE and FULLTEXT: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), problems with Yen sign (Japanese): faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), rejected characters: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), sort order problems: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), sorting problems: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), testing availability of characters: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), Unicode collations: faqs-cjk.
                                                             (line    6)
* CJK (Chinese, Japanese, Korean), Vietnamese: faqs-cjk.     (line    6)
* CJK (Chinese, Japanese, Korean), Yen sign: faqs-cjk.       (line    6)
* clean page:                            glossary.           (line  495)
* clean shutdown:                        glossary.           (line  499)
* cleaning up, thread state:             general-thread-states.
                                                             (line   32)
* clear command, mysql:                  mysql-commands.     (line   69)
* clearing, caches:                      flush.              (line    6)
* Clearing, thread state:                event-scheduler-thread-states.
                                                             (line   10)
* client:                                glossary.           (line  503)
* client connection threads:             connection-threads. (line    6)
* client programs:                       programs-overview.  (line  106)
* client programs, building:             c-api-building-clients.
                                                             (line    6)
* client tools:                          connectors-apis.    (line   23)
* clients, debugging:                    debugging-client.   (line    6)
* clients, threaded:                     c-api-threaded-clients.
                                                             (line    6)
* CLOSE:                                 close.              (line    6)
* Close stmt, thread command:            thread-commands.    (line   17)
* closing tables, thread state:          general-thread-states.
                                                             (line   37)
* closing, tables:                       table-cache.        (line    6)
* cluster database (OBSOLETE):           mysql-cluster-replication-schema.
                                                             (line    6)
* cluster logs <1>:                      mysql-cluster-logging-management-commands.
                                                             (line    6)
* cluster logs:                          mysql-cluster-event-reports.
                                                             (line   12)
* cluster.binlog_index table (OBSOLETE): mysql-cluster-replication-schema.
                                                             (line    6)
* cluster_operations, ndbinfo table:     mysql-cluster-ndbinfo-cluster-operations.
                                                             (line    6)
* cluster_replication database (OBSOLETE): mysql-cluster-replication-schema.
                                                             (line    6)
* cluster_transactions, ndbinfo table:   mysql-cluster-ndbinfo-cluster-transactions.
                                                             (line    6)
* clustered index:                       glossary.           (line  508)
* clustered index, InnoDB:               innodb-index-types. (line    6)
* Clustering:                            mysql-cluster.      (line   16)
* CLUSTERLOG commands (MySQL Cluster):   mysql-cluster-logging-management-commands.
                                                             (line   12)
* CLUSTERLOG STATISTICS command (MySQL Cluster): mysql-cluster-log-statistics.
                                                             (line    6)
* CMake, BUILD_CONFIG option:            source-configuration-options.
                                                             (line  189)
* CMake, CMAKE_BUILD_TYPE option:        source-configuration-options.
                                                             (line  195)
* CMake, CMAKE_INSTALL_PREFIX option:    source-configuration-options.
                                                             (line  224)
* CMake, COMPILATION_COMMENT option:     source-configuration-options.
                                                             (line  395)
* CMake, CPACK_MONOLITHIC_INSTALL option: source-configuration-options.
                                                             (line  207)
* CMake, DEFAULT_CHARSET option:         source-configuration-options.
                                                             (line  399)
* CMake, DEFAULT_COLLATION option:       source-configuration-options.
                                                             (line  417)
* CMake, ENABLE_DEBUG_SYNC option:       source-configuration-options.
                                                             (line  426)
* CMake, ENABLE_DOWNLOADS option:        source-configuration-options.
                                                             (line  445)
* CMake, ENABLE_DTRACE option:           source-configuration-options.
                                                             (line  451)
* CMake, ENABLE_GCOV option:             source-configuration-options.
                                                             (line  456)
* CMake, ENABLED_LOCAL_INFILE option:    source-configuration-options.
                                                             (line  460)
* CMake, ENABLED_PROFILING option:       source-configuration-options.
                                                             (line  469)
* CMake, HAVE_EMBEDDED_PRIVILEGE_CONTROL option: source-configuration-options.
                                                             (line  591)
* CMake, IGNORE_AIO_CHECK option:        source-configuration-options.
                                                             (line  475)
* CMake, INSTALL_BINDIR option:          source-configuration-options.
                                                             (line  231)
* CMake, INSTALL_DOCDIR option:          source-configuration-options.
                                                             (line  235)
* CMake, INSTALL_DOCREADMEDIR option:    source-configuration-options.
                                                             (line  239)
* CMake, INSTALL_INCLUDEDIR option:      source-configuration-options.
                                                             (line  243)
* CMake, INSTALL_INFODIR option:         source-configuration-options.
                                                             (line  247)
* CMake, INSTALL_LAYOUT option:          source-configuration-options.
                                                             (line  251)
* CMake, INSTALL_LIBDIR option:          source-configuration-options.
                                                             (line  269)
* CMake, INSTALL_MANDIR option:          source-configuration-options.
                                                             (line  273)
* CMake, INSTALL_MYSQLSHAREDIR option:   source-configuration-options.
                                                             (line  277)
* CMake, INSTALL_MYSQLTESTDIR option:    source-configuration-options.
                                                             (line  281)
* CMake, INSTALL_PLUGINDIR option:       source-configuration-options.
                                                             (line  287)
* CMake, INSTALL_SBINDIR option:         source-configuration-options.
                                                             (line  294)
* CMake, INSTALL_SCRIPTDIR option:       source-configuration-options.
                                                             (line  298)
* CMake, INSTALL_SHAREDIR option:        source-configuration-options.
                                                             (line  302)
* CMake, INSTALL_SQLBENCHDIR option:     source-configuration-options.
                                                             (line  306)
* CMake, INSTALL_SUPPORTFILESDIR option: source-configuration-options.
                                                             (line  312)
* CMake, MEMCACHED_HOME option:          source-configuration-options.
                                                             (line  603)
* CMake, MYSQL_DATADIR option:           source-configuration-options.
                                                             (line  316)
* CMake, MYSQL_MAINTAINER_MODE option:   source-configuration-options.
                                                             (line  483)
* CMake, MYSQL_PROJECT_NAME option:      source-configuration-options.
                                                             (line  489)
* CMake, MYSQL_TCP_PORT option:          source-configuration-options.
                                                             (line  494)
* CMake, MYSQL_UNIX_ADDR option:         source-configuration-options.
                                                             (line  501)
* CMake, ODBC_INCLUDES option:           source-configuration-options.
                                                             (line  323)
* CMake, ODBC_LIB_DIR option:            source-configuration-options.
                                                             (line  328)
* CMake, options:                        source-configuration-options.
                                                             (line    6)
* CMake, running after prior invocation <1>: compilation-problems.
                                                             (line    9)
* CMake, running after prior invocation: installing-source-distribution.
                                                             (line  165)
* CMake, SYSCONFDIR option:              source-configuration-options.
                                                             (line  333)
* CMake, VERSION file:                   source-configuration-third-party.
                                                             (line    6)
* CMake, WITH_BUNDLED_LIBEVENT option:   source-configuration-options.
                                                             (line  624)
* CMake, WITH_BUNDLED_MEMCACHED option:  source-configuration-options.
                                                             (line  631)
* CMake, WITH_CLASSPATH option:          source-configuration-options.
                                                             (line  642)
* CMake, WITH_DEBUG option:              source-configuration-options.
                                                             (line  509)
* CMake, WITH_EMBEDDED_SERVER option:    source-configuration-options.
                                                             (line  519)
* CMake, WITH_ERROR_INSERT option:       source-configuration-options.
                                                             (line  648)
* CMake, WITH_EXTRA_CHARSETS option:     source-configuration-options.
                                                             (line  523)
* CMake, WITH_LIBEDIT option:            source-configuration-options.
                                                             (line  533)
* CMake, WITH_LIBWRAP option:            source-configuration-options.
                                                             (line  537)
* CMake, WITH_NDB_BINLOG option:         source-configuration-options.
                                                             (line  669)
* CMake, WITH_NDB_DEBUG option:          source-configuration-options.
                                                             (line  674)
* CMake, WITH_NDB_JAVA option:           source-configuration-options.
                                                             (line  679)
* CMake, WITH_NDB_PORT option:           source-configuration-options.
                                                             (line  690)
* CMake, WITH_NDB_TEST option:           source-configuration-options.
                                                             (line  697)
* CMake, WITH_NDBCLUSTER option:         source-configuration-options.
                                                             (line  660)
* CMake, WITH_NDBCLUSTER_STORAGE_ENGINE option: source-configuration-options.
                                                             (line  654)
* CMake, WITH_NDBMTD option:             source-configuration-options.
                                                             (line  664)
* CMake, WITH_READLINE option:           source-configuration-options.
                                                             (line  541)
* CMake, WITH_SSL option:                source-configuration-options.
                                                             (line  546)
* CMake, WITH_UNIXODBC option:           source-configuration-options.
                                                             (line  342)
* CMake, WITH_ZLIB option:               source-configuration-options.
                                                             (line  562)
* CMake, WITHOUT_SERVER option:          source-configuration-options.
                                                             (line  574)
* CMAKE_BUILD_TYPE option, CMake:        source-configuration-options.
                                                             (line  195)
* CMAKE_INSTALL_PREFIX option, CMake:    source-configuration-options.
                                                             (line  224)
* CMakeCache.txt file:                   compilation-problems.
                                                             (line    6)
* COALESCE():                            comparison-operators.
                                                             (line  230)
* COERCIBILITY():                        information-functions.
                                                             (line   90)
* cold backup:                           glossary.           (line  519)
* ColdFusion:                            connector-odbc-usagenotes-apptips-coldfusion.
                                                             (line    6)
* collating, strings:                    string-collating.   (line    6)
* COLLATION():                           information-functions.
                                                             (line  119)
* collation, adding:                     adding-collation.   (line   13)
* collation, INFORMATION_SCHEMA:         charset-collation-information-schema.
                                                             (line    6)
* collation, modifying:                  adding-collation.   (line   59)
* collation, names:                      charset-collation-names.
                                                             (line    6)
* collation-server option, mysqld:       server-options.     (line  359)
* COLLATION_CHARACTER_SET_APPLICABILITY, INFORMATION_SCHEMA table: collation-character-set-applicability-table.
                                                             (line    6)
* collation_connection system variable:  server-system-variables.
                                                             (line 1085)
* collation_database system variable:    server-system-variables.
                                                             (line 1100)
* collation_server system variable:      server-system-variables.
                                                             (line 1140)
* COLLATIONS, INFORMATION_SCHEMA table:  collations-table.   (line    6)
* column:                                glossary.           (line  523)
* column alias, problems:                problems-with-alias.
                                                             (line    6)
* column alias, quoting <1>:             problems-with-alias.
                                                             (line    6)
* column alias, quoting:                 identifiers.        (line   78)
* column comments:                       create-table.       (line  345)
* Column Editor:                         connector-net-visual-studio-editing-tables-column-editor.
                                                             (line    6)
* column format:                         create-table.       (line  351)
* column index:                          glossary.           (line  536)
* column names, case sensitivity:        identifier-case-sensitivity.
                                                             (line    6)
* column prefix:                         glossary.           (line  538)
* column storage:                        create-table.       (line  370)
* column, changing:                      alter-table.        (line  348)
* column, types:                         data-types.         (line   30)
* column-names option, mysql:            mysql-command-options.
                                                             (line  212)
* column-type-info option, mysql:        mysql-command-options.
                                                             (line  216)
* COLUMN_PRIVILEGES, INFORMATION_SCHEMA table: column-privileges-table.
                                                             (line    6)
* columns option, mysqlimport:           mysqlimport.        (line  146)
* columns partitioning:                  partitioning-columns.
                                                             (line   11)
* columns per table, maximum:            column-count-limit. (line    6)
* columns, displaying:                   mysqlshow.          (line    6)
* columns, indexes:                      column-indexes.     (line    6)
* COLUMNS, INFORMATION_SCHEMA table:     columns-table.      (line    6)
* columns, names:                        identifiers.        (line   13)
* columns, other types:                  other-vendor-data-types.
                                                             (line    6)
* columns, selecting:                    selecting-columns.  (line    6)
* columns, storage requirements:         storage-requirements.
                                                             (line    6)
* comma-separated values data, reading <1>: select-into.     (line  116)
* comma-separated values data, reading:  load-data.          (line  306)
* command options (MySQL Cluster), mysqld: mysql-cluster-program-options-mysqld.
                                                             (line    6)
* command options (MySQL Cluster), ndb_mgm: mysql-cluster-programs-ndb-mgm.
                                                             (line   27)
* command options (MySQL Cluster), ndb_mgmd: mysql-cluster-programs-ndb-mgmd.
                                                             (line   12)
* command options (MySQL Cluster), ndbd: mysql-cluster-programs-ndbd.
                                                             (line   17)
* command options (MySQL Cluster), ndbinfo_select_all: mysql-cluster-programs-ndbinfo-select-all.
                                                             (line   59)
* command options, mysql:                mysql-command-options.
                                                             (line    6)
* command options, mysqladmin:           mysqladmin.         (line  221)
* command options, mysqld:               server-options.     (line    6)
* command syntax:                        manual-conventions. (line  120)
* command-line history, mysql:           mysql-logging.      (line    6)
* command-line options (MySQL Cluster):  mysql-cluster-program-options-common.
                                                             (line    6)
* command-line tool <1>:                 mysql.              (line   15)
* command-line tool:                     MySQLInstallerConsole.
                                                             (line    6)
* commands out of sync:                  commands-out-of-sync.
                                                             (line    6)
* commands, for binary distribution:     binary-installation.
                                                             (line   78)
* comment syntax:                        comments.           (line    6)
* comments option, mysql:                mysql-command-options.
                                                             (line  220)
* comments option, mysqldump:            mysqldump.          (line  483)
* comments, adding:                      comments.           (line    6)
* comments, starting:                    ansi-diff-comments. (line    6)
* commit:                                glossary.           (line  551)
* COMMIT <1>:                            commit.             (line    6)
* COMMIT:                                ansi-diff-transactions.
                                                             (line    6)
* commit option, mysqlaccess:            mysqlaccess.        (line   75)
* commit option, mysqlslap:              mysqlslap.          (line  256)
* COMMIT, XA transactions:               xa-statements.      (line    6)
* Committing events to binlog, thread state: mysql-cluster-thread-states.
                                                             (line    6)
* comp_err <1>:                          comp-err.           (line    6)
* comp_err:                              programs-overview.  (line   66)
* comp_err, charset option:              comp-err.           (line   29)
* comp_err, debug option:                comp-err.           (line   34)
* comp_err, debug-info option:           comp-err.           (line   39)
* comp_err, header_file option:          comp-err.           (line   43)
* comp_err, help option:                 comp-err.           (line   25)
* comp_err, in_file option:              comp-err.           (line   47)
* comp_err, name_file option:            comp-err.           (line   52)
* comp_err, out_dir option:              comp-err.           (line   56)
* comp_err, out_file option:             comp-err.           (line   61)
* comp_err, statefile option:            comp-err.           (line   65)
* comp_err, version option:              comp-err.           (line   70)
* compact option, mysqldump:             mysqldump.          (line  490)
* compact row format:                    glossary.           (line  563)
* comparison operators:                  comparison-operators.
                                                             (line    6)
* compatibility, between MySQL versions <1>: upgrading-from-5-4.
                                                             (line    6)
* compatibility, between MySQL versions: upgrading-from-previous-series.
                                                             (line    6)
* compatibility, with mSQL:              regexp.             (line   32)
* compatibility, with ODBC <1>:          join.               (line  147)
* compatibility, with ODBC <2>:          create-table.       (line  299)
* compatibility, with ODBC <3>:          comparison-operators.
                                                             (line  153)
* compatibility, with ODBC <4>:          type-conversion.    (line   44)
* compatibility, with ODBC <5>:          numeric-type-overview.
                                                             (line  255)
* compatibility, with ODBC <6>:          identifier-qualifiers.
                                                             (line   48)
* compatibility, with ODBC:              server-system-variables.
                                                             (line 5520)
* compatibility, with Oracle <1>:        explain.            (line   53)
* compatibility, with Oracle <2>:        alter-table.        (line  312)
* compatibility, with Oracle <3>:        group-by-functions. (line  240)
* compatibility, with Oracle:            extensions-to-ansi. (line   96)
* compatibility, with PostgreSQL:        extensions-to-ansi. (line  190)
* compatibility, with standard SQL:      compatibility.      (line   15)
* compatible option, mysqldump:          mysqldump.          (line  496)
* COMPILATION_COMMENT option, CMake:     source-configuration-options.
                                                             (line  395)
* compiling clients, on Unix:            c-api-building-clients.
                                                             (line   11)
* compiling clients, on Windows:         c-api-building-clients.
                                                             (line   48)
* compiling, optimizing:                 system-optimization.
                                                             (line    6)
* compiling, problems:                   compilation-problems.
                                                             (line    6)
* compiling, user-defined functions:     udf-compiling.      (line    6)
* complete-insert option, mysqldump:     mysqldump.          (line  516)
* completion_type system variable:       server-system-variables.
                                                             (line 1158)
* composite index:                       glossary.           (line  572)
* composite partitioning:                partitioning-subpartitions.
                                                             (line   26)
* compound statements:                   sql-syntax-compound-statements.
                                                             (line   16)
* compress option, mysql:                mysql-command-options.
                                                             (line  226)
* compress option, mysqladmin:           mysqladmin.         (line  329)
* compress option, mysqlcheck:           mysqlcheck.         (line  254)
* compress option, mysqldump:            mysqldump.          (line  521)
* compress option, mysqlimport:          mysqlimport.        (line  152)
* compress option, mysqlshow:            mysqlshow.          (line  133)
* compress option, mysqlslap:            mysqlslap.          (line  261)
* COMPRESS():                            encryption-functions.
                                                             (line  154)
* compressed backup:                     glossary.           (line  574)
* compressed row format:                 glossary.           (line  593)
* compressed tables <1>:                 compressed-format.  (line    6)
* compressed tables:                     myisampack.         (line    6)
* CompressedBackup:                      mysql-cluster-ndbd-definition.
                                                             (line 1567)
* CompressedLCP:                         mysql-cluster-ndbd-definition.
                                                             (line 1591)
* compression:                           glossary.           (line  603)
* compression failure:                   glossary.           (line  638)
* compression, algorithms:               innodb-compression-internals.
                                                             (line   13)
* compression, application and schema design: innodb-compression-tuning.
                                                             (line   74)
* compression, BLOBs, VARCHAR and TEXT:  innodb-compression-internals.
                                                             (line  110)
* compression, buffer pool:              innodb-compression-internals.
                                                             (line  161)
* compression, compressed page size:     innodb-compression-tuning.
                                                             (line  161)
* compression, configuration characteristics: innodb-compression-tuning.
                                                             (line  143)
* compression, data and indexes:         innodb-compression-internals.
                                                             (line   44)
* compression, data characteristics:     innodb-compression-tuning.
                                                             (line   28)
* compression, enabling for a table:     innodb-compression-usage.
                                                             (line   11)
* compression, implementation:           innodb-compression-internals.
                                                             (line    6)
* compression, information schema <1>:   innodb-information-schema-compression-tables.
                                                             (line   12)
* compression, information schema:       innodb-information-schema.
                                                             (line   12)
* compression, innodb_strict_mode:       innodb-other-changes-strict-mode.
                                                             (line    6)
* compression, KEY_BLOCK_SIZE:           innodb-compression-tuning.
                                                             (line  161)
* compression, log files:                innodb-compression-internals.
                                                             (line  197)
* compression, modification log:         innodb-compression-internals.
                                                             (line   64)
* compression, monitoring:               innodb-compression-tuning.
                                                             (line  179)
* compression, overflow pages:           innodb-compression-internals.
                                                             (line  110)
* compression, overview:                 innodb-compression-background.
                                                             (line    6)
* compression, tuning:                   innodb-compression-tuning.
                                                             (line    6)
* compression, with Connector/Net network traffic: connector-net-connection-options.
                                                             (line    6)
* compression, workload characteristics: innodb-compression-tuning.
                                                             (line  112)
* CONCAT():                              string-functions.   (line  189)
* CONCAT_WS():                           string-functions.   (line  217)
* concatenation, string <1>:             string-functions.   (line  189)
* concatenation, string:                 string-literals.    (line   12)
* concurrency <1>:                       glossary.           (line  658)
* concurrency:                           innodb-storage-engine.
                                                             (line   24)
* concurrency option, mysqlslap:         mysqlslap.          (line  266)
* concurrency, of commits:               innodb-parameters.  (line  512)
* concurrency, of threads:               innodb-parameters.  (line 2056)
* concurrency, tickets:                  innodb-parameters.  (line  538)
* concurrent inserts <1>:                concurrent-inserts. (line    6)
* concurrent inserts:                    internal-locking.   (line   81)
* concurrent_insert system variable:     server-system-variables.
                                                             (line 1223)
* cond_instances table, performance_schema: cond-instances-table.
                                                             (line    6)
* conditions <1>:                        show-warnings.      (line    6)
* conditions:                            show-errors.        (line    6)
* Conditions:                            declare-condition.  (line    6)
* config option, MySQLInstallerConsole:  MySQLInstallerConsole.
                                                             (line   80)
* config-cache option (ndb_mgmd):        mysql-cluster-programs-ndb-mgmd.
                                                             (line  144)
* config-file option (ndb_mgmd):         mysql-cluster-programs-ndb-mgmd.
                                                             (line  203)
* config-file option, my_print_defaults: my-print-defaults.  (line   29)
* config-file option, mysqld_multi:      mysqld-multi.       (line   89)
* config-file option, ndb_config:        mysql-cluster-programs-ndb-config.
                                                             (line  152)
* config.ini (MySQL Cluster) <1>:        mysql-cluster-programs-ndb-mgmd.
                                                             (line  554)
* config.ini (MySQL Cluster) <2>:        mysql-cluster-config-example.
                                                             (line    6)
* config.ini (MySQL Cluster) <3>:        mysql-cluster-config-file.
                                                             (line   21)
* config.ini (MySQL Cluster):            mysql-cluster-install-configuration.
                                                             (line    6)
* config_from_node option, ndb_config:   mysql-cluster-programs-ndb-config.
                                                             (line  102)
* config_params, ndbinfo table:          mysql-cluster-ndbinfo-config-params.
                                                             (line    6)
* configdir option (ndb_mgmd):           mysql-cluster-programs-ndb-mgmd.
                                                             (line  129)
* configinfo option, ndb_config:         mysql-cluster-programs-ndb-config.
                                                             (line  364)
* configuration file:                    glossary.           (line  665)
* configuration files:                   access-denied.      (line  101)
* configuration, MySQL Cluster:          mysql-cluster-params-overview.
                                                             (line   13)
* configuring backups, in MySQL Cluster: mysql-cluster-backup-configuration.
                                                             (line    6)
* configuring MySQL Cluster <1>:         mysql-cluster-mysqld.
                                                             (line   52)
* configuring MySQL Cluster <2>:         mysql-cluster-programs-ndb-mgmd.
                                                             (line  554)
* configuring MySQL Cluster <3>:         mysql-cluster-configuration.
                                                             (line   14)
* configuring MySQL Cluster:             mysql-cluster-installation.
                                                             (line   16)
* Configuring MySQL Cluster (concepts):  mysql-cluster-basics.
                                                             (line    6)
* conflict resolution, and ndb_replication system table: mysql-cluster-replication-conflict-resolution.
                                                             (line  163)
* conflict resolution, enabling:         mysql-cluster-replication-conflict-resolution.
                                                             (line  155)
* conflict resolution, in MySQL Cluster Replication: mysql-cluster-replication-conflict-resolution.
                                                             (line    6)
* conflict resolution, mysqld startup options: mysql-cluster-replication-conflict-resolution.
                                                             (line  100)
* connect command, mysql:                mysql-commands.     (line   74)
* Connect Out, thread command:           thread-commands.    (line   25)
* Connect, thread command:               thread-commands.    (line   21)
* connect-delay option (ndbd):           mysql-cluster-programs-ndbd.
                                                             (line  388)
* connect-delay option (ndbmtd):         mysql-cluster-programs-ndbd.
                                                             (line  388)
* connect-retries option (ndbd):         mysql-cluster-programs-ndbd.
                                                             (line  366)
* connect-retries option (ndbmtd):       mysql-cluster-programs-ndbd.
                                                             (line  366)
* connect-string option (MySQL Cluster programs): mysql-cluster-program-options-common.
                                                             (line  108)
* connect_timeout system variable:       server-system-variables.
                                                             (line 1284)
* connect_timeout variable <1>:          mysqladmin.         (line  478)
* connect_timeout variable:              mysql-command-options.
                                                             (line  647)
* ConnectCheckIntervalDelay:             mysql-cluster-ndbd-definition.
                                                             (line 1894)
* Connecting to master, thread state:    slave-io-thread-states.
                                                             (line   16)
* connecting, remotely with SSH:         windows-and-ssh.    (line    6)
* connecting, through Connector/Net:     connector-net-programming-connecting.
                                                             (line    6)
* connecting, through JDBC and Connector/J: connector-j-reference-configuration-properties.
                                                             (line   10)
* connecting, through Visual Studio:     connector-net-visual-studio-making-a-connection.
                                                             (line    6)
* connecting, to the server <1>:         connecting.         (line    6)
* connecting, to the server:             connecting-disconnecting.
                                                             (line    6)
* connecting, verification:              connection-access.  (line    6)
* CONNECTION Events (MySQL Cluster):     mysql-cluster-log-events.
                                                             (line   20)
* connection pooling <1>:                connector-j-usagenotes-glassfish-config.
                                                             (line   11)
* connection pooling <2>:                connector-j-usagenotes-spring-config-connpooling.
                                                             (line    6)
* connection pooling <3>:                connector-j-usagenotes-j2ee-concepts-connection-pooling.
                                                             (line    6)
* connection pooling <4>:                connector-net-connection-options.
                                                             (line    6)
* connection pooling:                    connector-net-programming-connection-pooling.
                                                             (line    6)
* connection string <1>:                 connector-net-connection-options.
                                                             (line    6)
* connection string <2>:                 connector-net-programming-connecting-connection-string.
                                                             (line   12)
* connection string:                     mysql-cluster-connection-strings.
                                                             (line    6)
* connection, aborted:                   communication-errors.
                                                             (line    6)
* CONNECTION_ID():                       information-functions.
                                                             (line  128)
* connections option, ndb_config:        mysql-cluster-programs-ndb-config.
                                                             (line  274)
* Connector/C <1>:                       connector-c.        (line   14)
* Connector/C:                           connectors-apis.    (line   23)
* Connector/C++ <1>:                     connector-cpp.      (line   20)
* Connector/C++:                         connectors-apis.    (line   23)
* Connector/J <1>:                       connector-j.        (line   26)
* Connector/J:                           connectors-apis.    (line   23)
* Connector/J, known issues:             connector-j-usagenotes-known-issues-limitations.
                                                             (line    6)
* Connector/J, limitations:              connector-j-usagenotes-known-issues-limitations.
                                                             (line    6)
* Connector/J, reporting problems:       connector-j-support-bug-report.
                                                             (line    6)
* Connector/J, troubleshooting:          connector-j-usagenotes-troubleshooting.
                                                             (line    6)
* Connector/Net <1>:                     connector-net.      (line   20)
* Connector/Net:                         connectors-apis.    (line   23)
* Connector/Net, reporting problems:     connector-net-support.
                                                             (line   11)
* Connector/ODBC <1>:                    connector-odbc.     (line   17)
* Connector/ODBC:                        connectors-apis.    (line   23)
* Connector/ODBC, reporting problems:    connector-odbc-support.
                                                             (line   12)
* Connector/ODBC, with Borland applications: connector-odbc-usagenotes-apptips-borland.
                                                             (line   12)
* Connector/Python <1>:                  connector-python.   (line   17)
* Connector/Python:                      connectors-apis.    (line   23)
* Connectors:                            connectors-apis.    (line   23)
* consistent read:                       glossary.           (line  685)
* consistent reads:                      innodb-consistent-read.
                                                             (line    6)
* console option, mysqld:                server-options.     (line  378)
* const table, optimizer <1>:            select.             (line  387)
* const table, optimizer:                explain-output.     (line  240)
* constant table:                        where-optimizations.
                                                             (line   89)
* constraint:                            glossary.           (line  707)
* constraints:                           constraints.        (line   13)
* constraints, foreign keys:             create-table-foreign-keys.
                                                             (line    6)
* CONSTRAINTS, INFORMATION_SCHEMA table: table-constraints-table.
                                                             (line    6)
* Contains():                            functions-that-test-spatial-relationships-between-geometries.
                                                             (line   17)
* contributing companies, list of:       supporters.         (line    6)
* contributors, list of:                 contributors.       (line    6)
* control flow functions:                control-flow-functions.
                                                             (line    6)
* CONV():                                mathematical-functions.
                                                             (line  138)
* conventions, syntax:                   manual-conventions. (line    8)
* conventions, typographical:            manual-conventions. (line    8)
* CONVERT:                               cast-functions.     (line   45)
* CONVERT TO:                            alter-table.        (line  511)
* CONVERT_TZ():                          date-and-time-functions.
                                                             (line  175)
* converting HEAP to MyISAM, thread state: general-thread-states.
                                                             (line   44)
* ConvexHull():                          spatial-operators.  (line   16)
* copy option, mysqlaccess:              mysqlaccess.        (line   82)
* copy to tmp table, thread state:       general-thread-states.
                                                             (line   49)
* copying databases:                     copying-databases.  (line    6)
* copying tables <1>:                    create-table-select.
                                                             (line    6)
* copying tables:                        create-table.       (line 1407)
* Copying to group table, thread state:  general-thread-states.
                                                             (line   55)
* Copying to tmp table on disk, thread state: general-thread-states.
                                                             (line   64)
* Copying to tmp table, thread state:    general-thread-states.
                                                             (line   60)
* core-file option (MySQL Cluster programs): mysql-cluster-program-options-common.
                                                             (line  130)
* core-file option, mysqld:              server-options.     (line  396)
* core-file-size option, mysqld_safe:    mysqld-safe.        (line  119)
* correct-checksum option, myisamchk:    myisamchk-repair-options.
                                                             (line   19)
* correlated subqueries:                 correlated-subqueries.
                                                             (line    6)
* COS():                                 mathematical-functions.
                                                             (line  158)
* COT():                                 mathematical-functions.
                                                             (line  165)
* count option, myisam_ftdump:           myisam-ftdump.      (line   62)
* count option, mysqladmin:              mysqladmin.         (line  334)
* count option, mysqlshow:               mysqlshow.          (line  138)
* COUNT():                               group-by-functions. (line   93)
* COUNT(DISTINCT):                       group-by-functions. (line  123)
* counter:                               glossary.           (line  714)
* counters, ndbinfo table:               mysql-cluster-ndbinfo-counters.
                                                             (line    6)
* counting, table rows:                  counting-rows.      (line    6)
* covering index:                        glossary.           (line  722)
* CPACK_MONOLITHIC_INSTALL option, CMake: source-configuration-options.
                                                             (line  207)
* CR_SERVER_GONE_ERROR:                  gone-away.          (line    6)
* CR_SERVER_LOST_ERROR:                  gone-away.          (line    6)
* crash <1>:                             glossary.           (line  734)
* crash:                                 debugging-server.   (line   16)
* crash recovery:                        glossary.           (line  744)
* crash, recovery:                       myisam-crash-recovery.
                                                             (line    6)
* crash, repeated:                       crashing.           (line    6)
* crash, replication:                    replication-features-shutdowns.
                                                             (line    6)
* crash-me:                              mysql-benchmarks.   (line   43)
* crash-me program:                      mysql-benchmarks.   (line    6)
* CrashOnCorruptedTuple:                 mysql-cluster-ndbd-definition.
                                                             (line 1492)
* CRC32():                               mathematical-functions.
                                                             (line  174)
* CREATE ... IF NOT EXISTS, and replication: replication-features-create-if-not-exists.
                                                             (line    6)
* CREATE DATABASE:                       create-database.    (line    6)
* Create DB, thread command:             thread-commands.    (line   29)
* CREATE EVENT:                          create-event.       (line    6)
* CREATE EVENT, and replication:         replication-features-invoked.
                                                             (line   47)
* CREATE FUNCTION <1>:                   create-function-udf.
                                                             (line    6)
* CREATE FUNCTION:                       create-procedure.   (line    6)
* CREATE INDEX <1>:                      innodb-create-index-overview.
                                                             (line    6)
* CREATE INDEX:                          create-index.       (line    6)
* CREATE LOGFILE GROUP:                  create-logfile-group.
                                                             (line    6)
* CREATE NODEGROUP command (MySQL Cluster): mysql-cluster-mgm-client-commands.
                                                             (line  191)
* create option, mysqlslap:              mysqlslap.          (line  271)
* CREATE PROCEDURE:                      create-procedure.   (line    6)
* CREATE SCHEMA:                         create-database.    (line    6)
* CREATE SERVER:                         create-server.      (line    6)
* CREATE TABLE:                          create-table.       (line   12)
* CREATE TABLE ... SELECT, and replication: replication-features-create-select.
                                                             (line    6)
* CREATE TABLE, DIRECTORY options, and replication: replication-features-directory.
                                                             (line    6)
* CREATE TABLE, KEY_BLOCK_SIZE:          innodb-compression-tuning.
                                                             (line  161)
* CREATE TABLE, options for table compression: innodb-compression-usage.
                                                             (line   11)
* CREATE TABLE, ROW_FORMAT:              innodb-row-format-specification.
                                                             (line    6)
* CREATE TABLESPACE:                     create-tablespace.  (line    6)
* CREATE TRIGGER:                        create-trigger.     (line    6)
* CREATE USER:                           create-user.        (line    6)
* CREATE VIEW:                           create-view.        (line    6)
* create-options option, mysqldump:      mysqldump.          (line  526)
* create-schema option, mysqlslap:       mysqlslap.          (line  276)
* Creating delayed handler, thread state: delayed-insert-thread-states.
                                                             (line   22)
* Creating index, thread state:          general-thread-states.
                                                             (line   72)
* Creating sort index, thread state:     general-thread-states.
                                                             (line   77)
* creating table, thread state:          general-thread-states.
                                                             (line   82)
* Creating tmp table, thread state:      general-thread-states.
                                                             (line   87)
* creating user accounts:                create-user.        (line    6)
* creating, bug reports:                 bug-reports.        (line    6)
* creating, database:                    create-database.    (line    6)
* creating, databases:                   database-use.       (line   13)
* creating, default startup options:     option-files.       (line    6)
* creating, function:                    create-function-udf.
                                                             (line    6)
* creating, schema:                      create-database.    (line    6)
* creating, tables:                      creating-tables.    (line    6)
* CROSS JOIN:                            join.               (line    6)
* Crosses():                             functions-that-test-spatial-relationships-between-geometries.
                                                             (line   22)
* CRUD:                                  glossary.           (line  759)
* Crystal Reports:                       connector-net-programming-crystal.
                                                             (line   12)
* CSV data, reading <1>:                 select-into.        (line  116)
* CSV data, reading:                     load-data.          (line  306)
* csv option, mysqlslap:                 mysqlslap.          (line  286)
* CSV storage engine <1>:                csv-storage-engine. (line   11)
* CSV storage engine:                    storage-engines.    (line   22)
* CURDATE():                             date-and-time-functions.
                                                             (line  199)
* CURRENT_DATE:                          date-and-time-functions.
                                                             (line  210)
* CURRENT_TIME:                          date-and-time-functions.
                                                             (line  214)
* CURRENT_TIMESTAMP:                     date-and-time-functions.
                                                             (line  218)
* CURRENT_USER():                        information-functions.
                                                             (line  137)
* cursor:                                glossary.           (line  765)
* Cursors:                               cursors.            (line   13)
* CURTIME():                             date-and-time-functions.
                                                             (line  223)
* CXX environment variable <1>:          environment-variables.
                                                             (line   18)
* CXX environment variable:              compilation-problems.
                                                             (line   41)
* CXXFLAGS environment variable <1>:     environment-variables.
                                                             (line   18)
* CXXFLAGS environment variable:         compilation-problems.
                                                             (line   41)
* daemon option (ndb_mgmd):              mysql-cluster-programs-ndb-mgmd.
                                                             (line  254)
* daemon plugins:                        daemon-plugins.     (line    6)
* Daemon, thread command:                thread-commands.    (line   33)
* data dictionary:                       glossary.           (line  776)
* data directory:                        glossary.           (line  785)
* DATA DIRECTORY, and replication:       replication-features-directory.
                                                             (line    6)
* data files:                            glossary.           (line  789)
* data node (MySQL Cluster), defined:    mysql-cluster-basics.
                                                             (line    6)
* data nodes (MySQL Cluster) <1>:        mysql-cluster-programs-ndbmtd.
                                                             (line    6)
* data nodes (MySQL Cluster):            mysql-cluster-programs-ndbd.
                                                             (line    6)
* Data on disk (MySQL Cluster), and INFORMATION_SCHEMA.FILES table: files-table.
                                                             (line    6)
* Data truncation with CJK characters:   faqs-cjk.           (line    6)
* data type, BIGINT:                     numeric-type-overview.
                                                             (line  125)
* data type, BINARY <1>:                 binary-varbinary.   (line    6)
* data type, BINARY:                     string-type-overview.
                                                             (line  151)
* data type, BIT:                        numeric-type-overview.
                                                             (line   35)
* data type, BLOB <1>:                   blob.               (line    6)
* data type, BLOB:                       string-type-overview.
                                                             (line  180)
* data type, BOOL <1>:                   other-vendor-data-types.
                                                             (line    6)
* data type, BOOL:                       numeric-type-overview.
                                                             (line   45)
* data type, BOOLEAN <1>:                other-vendor-data-types.
                                                             (line    6)
* data type, BOOLEAN:                    numeric-type-overview.
                                                             (line   45)
* data type, CHAR <1>:                   string-types.       (line   14)
* data type, CHAR:                       string-type-overview.
                                                             (line   89)
* data type, CHAR VARYING:               string-type-overview.
                                                             (line  121)
* data type, CHARACTER:                  string-type-overview.
                                                             (line   89)
* data type, CHARACTER VARYING:          string-type-overview.
                                                             (line  121)
* data type, DATE <1>:                   datetime.           (line    6)
* data type, DATE:                       date-and-time-type-overview.
                                                             (line   16)
* data type, DATETIME <1>:               datetime.           (line    6)
* data type, DATETIME:                   date-and-time-type-overview.
                                                             (line   23)
* data type, DEC:                        numeric-type-overview.
                                                             (line  186)
* data type, DECIMAL <1>:                precision-math.     (line   14)
* data type, DECIMAL:                    numeric-type-overview.
                                                             (line  170)
* data type, DOUBLE:                     numeric-type-overview.
                                                             (line  214)
* data type, DOUBLE PRECISION:           numeric-type-overview.
                                                             (line  231)
* data type, ENUM <1>:                   enum.               (line    6)
* data type, ENUM:                       string-type-overview.
                                                             (line  242)
* data type, FIXED:                      numeric-type-overview.
                                                             (line  186)
* data type, FLOAT:                      numeric-type-overview.
                                                             (line  194)
* data type, GEOMETRY:                   mysql-spatial-datatypes.
                                                             (line    6)
* data type, GEOMETRYCOLLECTION:         mysql-spatial-datatypes.
                                                             (line    6)
* data type, INT:                        numeric-type-overview.
                                                             (line  116)
* data type, INTEGER:                    numeric-type-overview.
                                                             (line  121)
* data type, LINESTRING:                 mysql-spatial-datatypes.
                                                             (line    6)
* data type, LONG:                       blob.               (line    6)
* data type, LONGBLOB:                   string-type-overview.
                                                             (line  220)
* data type, LONGTEXT:                   string-type-overview.
                                                             (line  230)
* data type, MEDIUMBLOB:                 string-type-overview.
                                                             (line  204)
* data type, MEDIUMINT:                  numeric-type-overview.
                                                             (line  111)
* data type, MEDIUMTEXT:                 string-type-overview.
                                                             (line  211)
* data type, MULTILINESTRING:            mysql-spatial-datatypes.
                                                             (line    6)
* data type, MULTIPOINT:                 mysql-spatial-datatypes.
                                                             (line    6)
* data type, MULTIPOLYGON:               mysql-spatial-datatypes.
                                                             (line    6)
* data type, NATIONAL CHAR:              string-type-overview.
                                                             (line   89)
* data type, NATIONAL VARCHAR:           string-type-overview.
                                                             (line  121)
* data type, NCHAR:                      string-type-overview.
                                                             (line   89)
* data type, NUMERIC:                    numeric-type-overview.
                                                             (line  186)
* data type, NVARCHAR:                   string-type-overview.
                                                             (line  121)
* data type, POINT:                      mysql-spatial-datatypes.
                                                             (line    6)
* data type, POLYGON:                    mysql-spatial-datatypes.
                                                             (line    6)
* data type, REAL:                       numeric-type-overview.
                                                             (line  231)
* data type, SET <1>:                    set.                (line    6)
* data type, SET:                        string-type-overview.
                                                             (line  257)
* data type, SMALLINT:                   numeric-type-overview.
                                                             (line  106)
* data type, TEXT <1>:                   blob.               (line    6)
* data type, TEXT:                       string-type-overview.
                                                             (line  191)
* data type, TIME <1>:                   time.               (line    6)
* data type, TIME:                       date-and-time-type-overview.
                                                             (line   62)
* data type, TIMESTAMP <1>:              datetime.           (line    6)
* data type, TIMESTAMP:                  date-and-time-type-overview.
                                                             (line   31)
* data type, TINYBLOB:                   string-type-overview.
                                                             (line  165)
* data type, TINYINT:                    numeric-type-overview.
                                                             (line   40)
* data type, TINYTEXT:                   string-type-overview.
                                                             (line  171)
* data type, VARBINARY <1>:              binary-varbinary.   (line    6)
* data type, VARBINARY:                  string-type-overview.
                                                             (line  158)
* data type, VARCHAR <1>:                string-types.       (line   14)
* data type, VARCHAR:                    string-type-overview.
                                                             (line  121)
* data type, VARCHARACTER:               string-type-overview.
                                                             (line  121)
* data type, YEAR <1>:                   year.               (line    6)
* data type, YEAR:                       date-and-time-type-overview.
                                                             (line   69)
* data types:                            data-types.         (line   30)
* data types, C API:                     c-api.              (line   29)
* data types, overview:                  data-type-overview. (line   12)
* data warehouse:                        glossary.           (line  798)
* data, importing <1>:                   mysqlimport.        (line    6)
* data, importing:                       mysql-batch-commands.
                                                             (line    6)
* data, loading into tables:             loading-tables.     (line    6)
* data, retrieving:                      retrieving-data.    (line   18)
* data, size:                            data-size.          (line    6)
* data-file-length option, myisamchk:    myisamchk-repair-options.
                                                             (line   23)
* database:                              glossary.           (line  804)
* Database information, obtaining:       show.               (line   50)
* database metadata:                     information-schema. (line   40)
* database names, case sensitivity <1>:  identifier-case-sensitivity.
                                                             (line    6)
* database names, case sensitivity:      extensions-to-ansi. (line   38)
* database option (ndb_index_stat):      mysql-cluster-programs-ndb-index-stat.
                                                             (line  121)
* database option, mysql:                mysql-command-options.
                                                             (line  231)
* database option, mysqlbinlog:          mysqlbinlog.        (line  230)
* database option, ndb_blob_tool:        mysql-cluster-programs-ndb-blob-tool.
                                                             (line   76)
* database option, ndb_desc:             mysql-cluster-programs-ndb-desc.
                                                             (line  288)
* database option, ndb_show_tables:      mysql-cluster-programs-ndb-show-tables.
                                                             (line   49)
* DATABASE():                            information-functions.
                                                             (line  206)
* database, altering:                    alter-database.     (line    6)
* database, creating:                    create-database.    (line    6)
* database, deleting:                    drop-database.      (line    6)
* databases option, mysqlcheck:          mysqlcheck.         (line  259)
* databases option, mysqldump:           mysqldump.          (line  531)
* databases, backups:                    backup-and-recovery.
                                                             (line   15)
* databases, copying:                    copying-databases.  (line    6)
* databases, creating:                   database-use.       (line   13)
* databases, defined:                    what-is-mysql.      (line   25)
* databases, displaying:                 mysqlshow.          (line    6)
* databases, dumping <1>:                mysqlhotcopy.       (line    6)
* databases, dumping:                    mysqldump.          (line    6)
* databases, information about:          getting-information.
                                                             (line    6)
* databases, names:                      identifiers.        (line   13)
* databases, replicating:                replication.        (line   13)
* databases, selecting:                  creating-database.  (line    6)
* databases, symbolic links:             symbolic-links-to-databases.
                                                             (line    6)
* databases, using:                      database-use.       (line   13)
* DataDir <1>:                           mysql-cluster-ndbd-definition.
                                                             (line  242)
* DataDir:                               mysql-cluster-mgm-definition.
                                                             (line  219)
* datadir option, mysql.server:          mysql-server.       (line   40)
* datadir option, mysql_install_db:      mysql-install-db.   (line   57)
* datadir option, mysql_plugin:          mysql-plugin.       (line  102)
* datadir option, mysql_upgrade:         mysql-upgrade.      (line  168)
* datadir option, mysqld:                server-options.     (line  425)
* datadir option, mysqld_safe:           mysqld-safe.        (line  124)
* datadir system variable:               server-system-variables.
                                                             (line 1308)
* DataJunction:                          connector-odbc-usagenotes-apptips-datajunction.
                                                             (line    6)
* DataMemory:                            mysql-cluster-ndbd-definition.
                                                             (line  313)
* DATE:                                  using-date.         (line    6)
* date and time functions:               date-and-time-functions.
                                                             (line    6)
* Date and Time types:                   date-and-time-types.
                                                             (line   17)
* date calculations:                     date-calculations.  (line    6)
* DATE columns, problems:                using-date.         (line    6)
* DATE columns, with Connector/Net:      connector-net-programming-datetime.
                                                             (line   14)
* DATE data type <1>:                    datetime.           (line    6)
* DATE data type:                        date-and-time-type-overview.
                                                             (line   16)
* date literals:                         date-and-time-literals.
                                                             (line    6)
* date types:                            storage-requirements.
                                                             (line  130)
* date values, problems:                 datetime.           (line   53)
* DATE():                                date-and-time-functions.
                                                             (line  235)
* DATE_ADD():                            date-and-time-functions.
                                                             (line  254)
* date_format system variable:           server-system-variables.
                                                             (line 1328)
* DATE_FORMAT():                         date-and-time-functions.
                                                             (line  414)
* DATE_SUB():                            date-and-time-functions.
                                                             (line  254)
* DATEDIFF():                            date-and-time-functions.
                                                             (line  242)
* dates, used with partitioning:         partitioning-types. (line   53)
* dates, used with partitioning (examples) <1>: partitioning-pruning.
                                                             (line   79)
* dates, used with partitioning (examples) <2>: partitioning-subpartitions.
                                                             (line   42)
* dates, used with partitioning (examples) <3>: partitioning-hash.
                                                             (line   49)
* dates, used with partitioning (examples): partitioning-range.
                                                             (line  127)
* DATETIME data type <1>:                datetime.           (line    6)
* DATETIME data type:                    date-and-time-type-overview.
                                                             (line   23)
* datetime_format system variable:       server-system-variables.
                                                             (line 1332)
* DAY():                                 date-and-time-functions.
                                                             (line  502)
* DAYNAME():                             date-and-time-functions.
                                                             (line  506)
* DAYOFMONTH():                          date-and-time-functions.
                                                             (line  515)
* DAYOFWEEK():                           date-and-time-functions.
                                                             (line  524)
* DAYOFYEAR():                           date-and-time-functions.
                                                             (line  533)
* db option, mysqlaccess:                mysqlaccess.        (line   86)
* db table, sorting:                     request-access.     (line   51)
* DB2 SQL mode:                          server-sql-mode.    (line  514)
* DBI interface:                         apis-perl.          (line    6)
* DBI->quote:                            string-literals.    (line  141)
* DBI->trace:                            using-gdb-on-mysqld.
                                                             (line   89)
* DBI/DBD interface:                     apis-perl.          (line    6)
* DBI_TRACE environment variable <1>:    using-gdb-on-mysqld.
                                                             (line   89)
* DBI_TRACE environment variable:        environment-variables.
                                                             (line   18)
* DBI_USER environment variable:         environment-variables.
                                                             (line   18)
* DBUG package:                          dbug-package.       (line    6)
* DCL <1>:                               glossary.           (line  817)
* DCL <2>:                               revoke.             (line    6)
* DCL:                                   grant.              (line    6)
* DDL:                                   glossary.           (line  821)
* deadlock <1>:                          glossary.           (line  837)
* deadlock:                              innodb-parameters.  (line 1610)
* deadlock detection:                    glossary.           (line  874)
* DEALLOCATE PREPARE <1>:                deallocate-prepare. (line    6)
* DEALLOCATE PREPARE:                    sql-syntax-prepared-statements.
                                                             (line   13)
* debug option (MySQL Cluster programs): mysql-cluster-program-options-common.
                                                             (line  154)
* debug option, comp_err:                comp-err.           (line   34)
* debug option, my_print_defaults:       my-print-defaults.  (line   35)
* debug option, myisamchk:               myisamchk-general-options.
                                                             (line   21)
* debug option, myisampack:              myisampack.         (line   61)
* debug option, mysql:                   mysql-command-options.
                                                             (line  235)
* debug option, mysqlaccess:             mysqlaccess.        (line   90)
* debug option, mysqladmin:              mysqladmin.         (line  339)
* debug option, mysqlbinlog:             mysqlbinlog.        (line  316)
* debug option, mysqlcheck:              mysqlcheck.         (line  267)
* debug option, mysqld:                  server-options.     (line  444)
* debug option, mysqldump:               mysqldump.          (line  540)
* debug option, mysqldumpslow:           mysqldumpslow.      (line   53)
* debug option, mysqlhotcopy:            mysqlhotcopy.       (line  109)
* debug option, mysqlimport:             mysqlimport.        (line  157)
* debug option, mysqlshow:               mysqlshow.          (line  143)
* debug option, mysqlslap:               mysqlslap.          (line  291)
* debug system variable:                 server-system-variables.
                                                             (line 1336)
* Debug, thread command:                 thread-commands.    (line   38)
* debug-check option, mysql:             mysql-command-options.
                                                             (line  240)
* debug-check option, mysql_upgrade:     mysql-upgrade.      (line  173)
* debug-check option, mysqladmin:        mysqladmin.         (line  345)
* debug-check option, mysqlbinlog:       mysqlbinlog.        (line  322)
* debug-check option, mysqlcheck:        mysqlcheck.         (line  272)
* debug-check option, mysqldump:         mysqldump.          (line  546)
* debug-check option, mysqlimport:       mysqlimport.        (line  162)
* debug-check option, mysqlshow:         mysqlshow.          (line  148)
* debug-check option, mysqlslap:         mysqlslap.          (line  297)
* debug-info option, comp_err:           comp-err.           (line   39)
* debug-info option, mysql:              mysql-command-options.
                                                             (line  244)
* debug-info option, mysql_upgrade:      mysql-upgrade.      (line  177)
* debug-info option, mysqladmin:         mysqladmin.         (line  349)
* debug-info option, mysqlbinlog:        mysqlbinlog.        (line  326)
* debug-info option, mysqlcheck:         mysqlcheck.         (line  276)
* debug-info option, mysqldump:          mysqldump.          (line  550)
* debug-info option, mysqlimport:        mysqlimport.        (line  166)
* debug-info option, mysqlshow:          mysqlshow.          (line  152)
* debug-info option, mysqlslap:          mysqlslap.          (line  301)
* debug-sync-timeout option, mysqld:     server-options.     (line  479)
* debug_sync system variable:            server-system-variables.
                                                             (line 1389)
* debugging support:                     source-configuration-options.
                                                             (line    6)
* debugging, client:                     debugging-client.   (line    6)
* debugging, server:                     debugging-server.   (line   16)
* DEC data type:                         numeric-type-overview.
                                                             (line  186)
* decimal arithmetic:                    precision-math.     (line   14)
* DECIMAL data type <1>:                 precision-math.     (line   14)
* DECIMAL data type:                     numeric-type-overview.
                                                             (line  170)
* decimal point:                         data-types.         (line   38)
* DECLARE:                               declare.            (line    6)
* DECODE():                              encryption-functions.
                                                             (line  187)
* decode_bits myisamchk variable:        myisamchk-general-options.
                                                             (line   53)
* default accounts:                      default-privileges. (line    6)
* default host name:                     connecting.         (line    6)
* default installation location:         installation-layouts.
                                                             (line    6)
* default options:                       option-files.       (line    6)
* DEFAULT value clause <1>:              create-table.       (line  323)
* DEFAULT value clause:                  data-type-defaults. (line    6)
* default values <1>:                    insert.             (line   70)
* default values <2>:                    create-table.       (line  323)
* default values:                        data-type-defaults. (line    6)
* default values, BLOB and TEXT columns: blob.               (line   52)
* default values, explicit:              data-type-defaults. (line    6)
* default values, implicit:              data-type-defaults. (line    6)
* default values, suppression:           constraint-invalid-data.
                                                             (line    6)
* DEFAULT():                             miscellaneous-functions.
                                                             (line   29)
* DEFAULT, constraint:                   constraint-invalid-data.
                                                             (line    6)
* default, privileges:                   default-privileges. (line    6)
* default-auth option, mysql:            mysql-command-options.
                                                             (line  249)
* default-auth option, mysql_upgrade:    mysql-upgrade.      (line  182)
* default-auth option, mysqladmin:       mysqladmin.         (line  354)
* default-auth option, mysqlbinlog:      mysqlbinlog.        (line  331)
* default-auth option, mysqlcheck:       mysqlcheck.         (line  295)
* default-auth option, mysqldump:        mysqldump.          (line  555)
* default-auth option, mysqlimport:      mysqlimport.        (line  176)
* default-auth option, mysqlshow:        mysqlshow.          (line  162)
* default-auth option, mysqlslap:        mysqlslap.          (line  306)
* default-character-set option, mysql:   mysql-command-options.
                                                             (line  256)
* default-character-set option, mysqladmin: mysqladmin.      (line  361)
* default-character-set option, mysqlcheck: mysqlcheck.      (line  281)
* default-character-set option, mysqld:  server-options.     (line  504)
* default-character-set option, mysqldump: mysqldump.        (line  562)
* default-character-set option, mysqlimport: mysqlimport.    (line  171)
* default-character-set option, mysqlshow: mysqlshow.        (line  157)
* default-collation option, mysqld:      server-options.     (line  523)
* default-storage-engine option, mysqld: server-options.     (line  540)
* default-time-zone option, mysqld:      server-options.     (line  572)
* DEFAULT_CHARSET option, CMake:         source-configuration-options.
                                                             (line  399)
* DEFAULT_COLLATION option, CMake:       source-configuration-options.
                                                             (line  417)
* default_storage_engine system variable: server-system-variables.
                                                             (line 1424)
* default_week_format system variable:   server-system-variables.
                                                             (line 1460)
* DefaultHashMapSize <1>:                mysql-cluster-api-definition.
                                                             (line  319)
* DefaultHashMapSize:                    mysql-cluster-ndbd-definition.
                                                             (line  940)
* DefaultOperationRedoProblemAction, API and SQL nodes: mysql-cluster-api-definition.
                                                             (line  288)
* defaults, embedded:                    libmysqld-options.  (line    6)
* defaults-extra-file option:            option-file-options.
                                                             (line   21)
* defaults-extra-file option, my_print_defaults: my-print-defaults.
                                                             (line   41)
* defaults-extra-file option, mysqld_multi: mysqld-multi.    (line   66)
* defaults-extra-file option, mysqld_safe: mysqld-safe.      (line  128)
* defaults-file option:                  option-file-options.
                                                             (line   30)
* defaults-file option, my_print_defaults: my-print-defaults.
                                                             (line   31)
* defaults-file option, mysqld_multi:    mysqld-multi.       (line   64)
* defaults-file option, mysqld_safe:     mysqld-safe.        (line  135)
* defaults-group-suffix option:          option-file-options.
                                                             (line   38)
* defaults-group-suffix option, my_print_defaults: my-print-defaults.
                                                             (line   48)
* DEGREES():                             mathematical-functions.
                                                             (line  186)
* delay option (ndbinfo_select_all):     mysql-cluster-programs-ndbinfo-select-all.
                                                             (line   86)
* delay-key-write option, mysqld <1>:    myisam-start.       (line   45)
* delay-key-write option, mysqld:        server-options.     (line  588)
* delay_key_write system variable:       server-system-variables.
                                                             (line 1482)
* DELAYED:                               insert-delayed.     (line    6)
* Delayed insert, thread command:        thread-commands.    (line   42)
* delayed inserts, thread states:        delayed-insert-thread-states.
                                                             (line    6)
* DELAYED, when ignored:                 insert.             (line  226)
* delayed-insert option, mysqldump:      mysqldump.          (line  569)
* delayed_insert_limit:                  insert-delayed.     (line  134)
* delayed_insert_limit system variable:  server-system-variables.
                                                             (line 1532)
* delayed_insert_timeout system variable: server-system-variables.
                                                             (line 1564)
* delayed_queue_size system variable:    server-system-variables.
                                                             (line 1584)
* delete:                                glossary.           (line  878)
* DELETE:                                delete.             (line    6)
* delete buffering:                      glossary.           (line  885)
* delete option (ndb_index_stat):        mysql-cluster-programs-ndb-index-stat.
                                                             (line  136)
* delete option, mysqlimport:            mysqlimport.        (line  183)
* DELETE, and MySQL Cluster:             mysql-cluster-limitations-limits.
                                                             (line    9)
* delete-master-logs option, mysqldump:  mysqldump.          (line  574)
* delete-orphans option, ndb_blob_tool:  mysql-cluster-programs-ndb-blob-tool.
                                                             (line   90)
* deleting from main table, thread state: general-thread-states.
                                                             (line   94)
* deleting from reference tables, thread state: general-thread-states.
                                                             (line  100)
* deleting, database:                    drop-database.      (line    6)
* deleting, foreign key <1>:             create-table-foreign-keys.
                                                             (line  204)
* deleting, foreign key:                 alter-table.        (line  475)
* deleting, function:                    drop-function-udf.  (line    6)
* deleting, index <1>:                   drop-index.         (line    6)
* deleting, index:                       alter-table.        (line  355)
* deleting, primary key:                 alter-table.        (line  370)
* deleting, rows:                        deleting-from-related-tables.
                                                             (line    6)
* deleting, schema:                      drop-database.      (line    6)
* deleting, table:                       drop-table.         (line    6)
* deleting, user <1>:                    drop-user.          (line    6)
* deleting, user:                        removing-users.     (line    6)
* deleting, users <1>:                   drop-user.          (line    6)
* deleting, users:                       removing-users.     (line    6)
* deletion, mysql.sock:                  problems-with-mysql-sock.
                                                             (line    6)
* delimiter command, mysql:              mysql-commands.     (line   81)
* delimiter option, mysql:               mysql-command-options.
                                                             (line  270)
* delimiter option, mysqlslap:           mysqlslap.          (line  313)
* delimiter option, ndb_select_all:      mysql-cluster-programs-ndb-select-all.
                                                             (line  108)
* Delphi:                                connector-odbc-usagenotes-apptips-borland-delphi.
                                                             (line    6)
* denormalized:                          glossary.           (line  893)
* derived tables:                        from-clause-subqueries.
                                                             (line    6)
* des-key-file option, mysqld:           server-options.     (line  621)
* DES_DECRYPT():                         encryption-functions.
                                                             (line  192)
* DES_ENCRYPT():                         encryption-functions.
                                                             (line  213)
* DESC:                                  describe.           (line    6)
* descending index:                      glossary.           (line  900)
* descending option, ndb_select_all:     mysql-cluster-programs-ndb-select-all.
                                                             (line   93)
* DESCRIBE <1>:                          describe.           (line    6)
* DESCRIBE:                              getting-information.
                                                             (line    6)
* description option, myisamchk:         myisamchk-other-options.
                                                             (line   22)
* design, issues:                        bugs.               (line    6)
* detach option, mysqlslap:              mysqlslap.          (line  318)
* development of MySQL Cluster:          mysql-cluster-development.
                                                             (line   10)
* development source tree:               installing-development-tree.
                                                             (line    6)
* Difference():                          spatial-operators.  (line   21)
* digits:                                data-types.         (line   38)
* Dimension():                           general-geometry-property-functions.
                                                             (line    9)
* directory structure, default:          installation-layouts.
                                                             (line    6)
* dirty page <1>:                        glossary.           (line  906)
* dirty page:                            innodb-parameters.  (line  246)
* dirty read:                            glossary.           (line  910)
* disable named command, mysql:          mysql-command-options.
                                                             (line  275)
* disable-indexes option (ndb_restore):  mysql-cluster-programs-ndb-restore.
                                                             (line  810)
* disable-keys option, mysqldump:        mysqldump.          (line  581)
* disable-log-bin option, mysqlbinlog:   mysqlbinlog.        (line  338)
* DISCARD TABLESPACE <1>:                innodb-multiple-tablespaces.
                                                             (line  187)
* DISCARD TABLESPACE:                    alter-table.        (line  486)
* discard_or_import_tablespace, thread state: general-thread-states.
                                                             (line  105)
* disconnect-slave-event-count option, mysqld: replication-options-slave.
                                                             (line   61)
* disconnecting, from the server:        connecting-disconnecting.
                                                             (line    6)
* Disjoint():                            functions-that-test-spatial-relationships-between-geometries.
                                                             (line   40)
* Disk Data tables (MySQL Cluster):      mysql-cluster-disk-data.
                                                             (line   12)
* disk full:                             full-disk.          (line    6)
* disk option, ndb_select_all:           mysql-cluster-programs-ndb-select-all.
                                                             (line  115)
* disk performance:                      disk-issues.        (line   10)
* disk-based:                            glossary.           (line  925)
* disk-bound:                            glossary.           (line  933)
* DiskCheckpointSpeed:                   mysql-cluster-ndbd-definition.
                                                             (line 2155)
* DiskCheckpointSpeedInRestart:          mysql-cluster-ndbd-definition.
                                                             (line 2173)
* DiskIOThreadPool:                      mysql-cluster-ndbd-definition.
                                                             (line 3260)
* Diskless:                              mysql-cluster-ndbd-definition.
                                                             (line 1508)
* diskpagebuffer, ndbinfo table:         mysql-cluster-ndbinfo-diskpagebuffer.
                                                             (line    6)
* DiskPageBufferMemory:                  mysql-cluster-ndbd-definition.
                                                             (line 3210)
* disks, splitting data across:          windows-symbolic-links.
                                                             (line    6)
* DiskSyncSize:                          mysql-cluster-ndbd-definition.
                                                             (line 2133)
* display size:                          data-types.         (line   32)
* display triggers:                      show-triggers.      (line    6)
* display width:                         data-types.         (line   32)
* displaying, database information:      mysqlshow.          (line    6)
* displaying, information, Cardinality:  show-index.         (line   43)
* displaying, information, Collation:    show-index.         (line   38)
* displaying, information, SHOW <1>:     show-tables.        (line    6)
* displaying, information, SHOW <2>:     show-open-tables.   (line    6)
* displaying, information, SHOW <3>:     show-index.         (line    6)
* displaying, information, SHOW <4>:     show-columns.       (line    6)
* displaying, information, SHOW:         show.               (line   50)
* displaying, table status:              show-table-status.  (line    6)
* DISTINCT <1>:                          select.             (line  363)
* DISTINCT <2>:                          distinct-optimization.
                                                             (line    6)
* DISTINCT:                              selecting-columns.  (line   43)
* DISTINCT, AVG():                       group-by-functions. (line   59)
* DISTINCT, COUNT():                     group-by-functions. (line  123)
* DISTINCT, MAX():                       group-by-functions. (line  192)
* DISTINCT, MIN():                       group-by-functions. (line  212)
* DISTINCT, SUM():                       group-by-functions. (line  263)
* DISTINCTROW:                           select.             (line  363)
* distributed privileges (MySQL Cluster): mysql-cluster-privilege-distribution.
                                                             (line    6)
* distributed privileges (MySQL Cluster), and NDB API applications: mysql-cluster-privilege-distribution.
                                                             (line  196)
* DIV:                                   arithmetic-functions.
                                                             (line  114)
* div_precision_increment system variable: server-system-variables.
                                                             (line 1616)
* division (/):                          arithmetic-functions.
                                                             (line   98)
* DML:                                   glossary.           (line  941)
* DNS:                                   host-cache.         (line    6)
* DO:                                    do.                 (line    6)
* DocBook XML, documentation source format: manual-info.     (line   33)
* document id:                           glossary.           (line  954)
* Documentation, in Chinese:             faqs-cjk.           (line    6)
* Documentation, in Japanese:            faqs-cjk.           (line    6)
* Documentation, in Korean:              faqs-cjk.           (line    6)
* Documenters, list of:                  documenters-translators.
                                                             (line    6)
* dont_ignore_systab_0 option (ndb_restore): mysql-cluster-programs-ndb-restore.
                                                             (line  567)
* DOUBLE data type:                      numeric-type-overview.
                                                             (line  214)
* DOUBLE PRECISION data type:            numeric-type-overview.
                                                             (line  231)
* double quote (\"):                     string-literals.    (line   70)
* doublewrite buffer <1>:                glossary.           (line  963)
* doublewrite buffer:                    innodb-disk-io.     (line   34)
* downgrades, MySQL Cluster <1>:         mysql-cluster-rolling-restart.
                                                             (line    6)
* downgrades, MySQL Cluster:             mysql-cluster-upgrade-downgrade.
                                                             (line    6)
* downgrading <1>:                       innodb-downgrading-overview.
                                                             (line    6)
* downgrading <2>:                       downgrading.        (line   11)
* downgrading:                           upgrading-downgrading.
                                                             (line   14)
* downloading:                           getting-mysql.      (line    6)
* drop:                                  glossary.           (line  980)
* DROP ... IF EXISTS, and replication:   replication-features-drop-if-exists.
                                                             (line    6)
* DROP DATABASE:                         drop-database.      (line    6)
* Drop DB, thread command:               thread-commands.    (line   46)
* DROP EVENT:                            drop-event.         (line    6)
* DROP FOREIGN KEY <1>:                  create-table-foreign-keys.
                                                             (line  204)
* DROP FOREIGN KEY:                      alter-table.        (line  475)
* DROP FUNCTION <1>:                     drop-function-udf.  (line    6)
* DROP FUNCTION:                         drop-procedure.     (line    6)
* DROP INDEX <1>:                        innodb-create-index-overview.
                                                             (line    6)
* DROP INDEX <2>:                        drop-index.         (line    6)
* DROP INDEX:                            alter-table.        (line  355)
* DROP LOGFILE GROUP:                    drop-logfile-group. (line    6)
* DROP NODEGROUP command (MySQL Cluster): mysql-cluster-mgm-client-commands.
                                                             (line  213)
* DROP PREPARE:                          deallocate-prepare. (line    6)
* DROP PRIMARY KEY:                      alter-table.        (line  370)
* DROP PROCEDURE:                        drop-procedure.     (line    6)
* DROP SCHEMA:                           drop-database.      (line    6)
* DROP SERVER:                           drop-server.        (line    6)
* DROP TABLE:                            drop-table.         (line    6)
* DROP TABLE, and MySQL Cluster:         mysql-cluster-limitations-limits.
                                                             (line    9)
* DROP TABLESPACE:                       drop-tablespace.    (line    6)
* DROP TRIGGER:                          drop-trigger.       (line    6)
* DROP USER:                             drop-user.          (line    6)
* DROP VIEW:                             drop-view.          (line    6)
* dropping, user <1>:                    drop-user.          (line    6)
* dropping, user:                        removing-users.     (line    6)
* dryrun option, mysqlhotcopy:           mysqlhotcopy.       (line  113)
* DTrace:                                dba-dtrace-server.  (line   10)
* DTrace, and memcached:                 ha-memcached-using-dtrace.
                                                             (line    6)
* DTrace, and MySQL Connector/C++:       connector-cpp-debug-tracing.
                                                             (line    6)
* DUAL:                                  select.             (line   67)
* dump option (ndb_index_stat):          mysql-cluster-programs-ndb-index-stat.
                                                             (line  166)
* dump option, myisam_ftdump:            myisam-ftdump.      (line   66)
* dump-date option, mysqldump:           mysqldump.          (line  591)
* dump-file option, ndb_blob_tool:       mysql-cluster-programs-ndb-blob-tool.
                                                             (line  103)
* dump-slave option, mysqldump:          mysqldump.          (line  604)
* DUMPFILE:                              select-into.        (line  124)
* dumping, databases and tables <1>:     mysqlhotcopy.       (line    6)
* dumping, databases and tables:         mysqldump.          (line    6)
* dynamic row format:                    glossary.           (line  991)
* dynamic table characteristics:         dynamic-format.     (line    6)
* early adopter:                         glossary.           (line 1001)
* edit command, mysql:                   mysql-commands.     (line  116)
* EF 5:                                  connector-net-entityframework50.
                                                             (line    6)
* ego command, mysql:                    mysql-commands.     (line  125)
* Eiffel Wrapper:                        apis-eiffel.        (line    6)
* ELT():                                 string-functions.   (line  234)
* email lists:                           mailing-lists.      (line   10)
* embedded MySQL server library:         libmysqld.          (line   13)
* embedded option, mysql_config:         mysql-config.       (line   26)
* enable-cleartext-plugin option, mysql: mysql-command-options.
                                                             (line  283)
* enable-cleartext-plugin option, mysqladmin: mysqladmin.    (line  366)
* enable-cleartext-plugin option, mysqlslap: mysqlslap.      (line  323)
* enable-named-pipe option, mysqld:      server-options.     (line  637)
* enable-pstack option, mysqld:          server-options.     (line  649)
* ENABLE_DEBUG_SYNC option, CMake:       source-configuration-options.
                                                             (line  426)
* ENABLE_DOWNLOADS option, CMake:        source-configuration-options.
                                                             (line  445)
* ENABLE_DTRACE option, CMake:           source-configuration-options.
                                                             (line  451)
* ENABLE_GCOV option, CMake:             source-configuration-options.
                                                             (line  456)
* ENABLED_LOCAL_INFILE option, CMake:    source-configuration-options.
                                                             (line  460)
* ENABLED_PROFILING option, CMake:       source-configuration-options.
                                                             (line  469)
* ENCODE():                              encryption-functions.
                                                             (line  264)
* ENCRYPT():                             encryption-functions.
                                                             (line  279)
* encryption:                            ssl-basics.         (line   18)
* encryption functions:                  encryption-functions.
                                                             (line    6)
* END:                                   begin-end.          (line    6)
* end, thread state:                     general-thread-states.
                                                             (line  110)
* EndPoint():                            linestring-property-functions.
                                                             (line   10)
* engine option, mysqlslap:              mysqlslap.          (line  329)
* engine_condition_pushdown system variable: server-system-variables.
                                                             (line 1655)
* ENGINES, INFORMATION_SCHEMA table:     engines-table.      (line    6)
* ENTER SINGLE USER MODE command (MySQL Cluster): mysql-cluster-mgm-client-commands.
                                                             (line  158)
* entering, queries:                     entering-queries.   (line    6)
* enterprise components, MySQL Enterprise Audit <1>: mysql-enterprise-audit.
                                                             (line    6)
* enterprise components, MySQL Enterprise Audit: audit-log-plugin.
                                                             (line   15)
* enterprise components, MySQL Enterprise Backup: mysql-enterprise-backup.
                                                             (line    6)
* enterprise components, MySQL Enterprise Monitor: mysql-enterprise-monitor.
                                                             (line    6)
* enterprise components, MySQL Enterprise Security <1>: mysql-enterprise-security.
                                                             (line    6)
* enterprise components, MySQL Enterprise Security <2>: windows-authentication-plugin.
                                                             (line   11)
* enterprise components, MySQL Enterprise Security: pam-authentication-plugin.
                                                             (line   12)
* enterprise components, MySQL Thread Pool <1>: mysql-enterprise-thread-pool.
                                                             (line    6)
* enterprise components, MySQL Thread Pool: thread-pool-plugin.
                                                             (line   12)
* ENUM data type <1>:                    enum.               (line    6)
* ENUM data type:                        string-type-overview.
                                                             (line  242)
* ENUM, size:                            storage-requirements.
                                                             (line  241)
* Envelope():                            general-geometry-property-functions.
                                                             (line   22)
* environment variable, AUTHENTICATION_PAM_LOG: pam-authentication-plugin-debugging.
                                                             (line    6)
* environment variable, CC <1>:          environment-variables.
                                                             (line   18)
* environment variable, CC:              compilation-problems.
                                                             (line   41)
* environment variable, CFLAGS <1>:      environment-variables.
                                                             (line   18)
* environment variable, CFLAGS:          compilation-problems.
                                                             (line   41)
* environment variable, CXX <1>:         environment-variables.
                                                             (line   18)
* environment variable, CXX:             compilation-problems.
                                                             (line   41)
* environment variable, CXXFLAGS <1>:    environment-variables.
                                                             (line   18)
* environment variable, CXXFLAGS:        compilation-problems.
                                                             (line   41)
* environment variable, DBI_TRACE <1>:   using-gdb-on-mysqld.
                                                             (line   89)
* environment variable, DBI_TRACE:       environment-variables.
                                                             (line   18)
* environment variable, DBI_USER:        environment-variables.
                                                             (line   18)
* environment variable, HOME <1>:        mysql-logging.      (line    6)
* environment variable, HOME:            environment-variables.
                                                             (line   18)
* environment variable, LD_LIBRARY_PATH: perl-support-problems.
                                                             (line   20)
* environment variable, LD_RUN_PATH <1>: perl-support-problems.
                                                             (line   20)
* environment variable, LD_RUN_PATH:     environment-variables.
                                                             (line   18)
* environment variable, LIBMYSQL_ENABLE_CLEARTEXT_PLUGIN: environment-variables.
                                                             (line   18)
* environment variable, LIBMYSQL_PLUGINS: mysql-load-plugin. (line   36)
* environment variable, MYSQL_DEBUG <1>: debugging-client.   (line   10)
* environment variable, MYSQL_DEBUG <2>: programs-overview.  (line  276)
* environment variable, MYSQL_DEBUG:     environment-variables.
                                                             (line   18)
* environment variable, MYSQL_GROUP_SUFFIX: environment-variables.
                                                             (line   18)
* environment variable, MYSQL_HISTFILE <1>: mysql-logging.   (line    6)
* environment variable, MYSQL_HISTFILE:  environment-variables.
                                                             (line   18)
* environment variable, MYSQL_HOME:      environment-variables.
                                                             (line   18)
* environment variable, MYSQL_HOST <1>:  connecting.         (line  238)
* environment variable, MYSQL_HOST:      environment-variables.
                                                             (line   18)
* environment variable, MYSQL_PS1:       environment-variables.
                                                             (line   18)
* environment variable, MYSQL_PWD <1>:   connecting.         (line  238)
* environment variable, MYSQL_PWD <2>:   programs-overview.  (line  276)
* environment variable, MYSQL_PWD:       environment-variables.
                                                             (line   18)
* environment variable, MYSQL_TCP_PORT <1>: multiple-server-clients.
                                                             (line   27)
* environment variable, MYSQL_TCP_PORT <2>: multiple-unix-servers.
                                                             (line   69)
* environment variable, MYSQL_TCP_PORT <3>: programs-overview.
                                                             (line  276)
* environment variable, MYSQL_TCP_PORT:  environment-variables.
                                                             (line   18)
* environment variable, MYSQL_UNIX_PORT <1>: multiple-server-clients.
                                                             (line   27)
* environment variable, MYSQL_UNIX_PORT <2>: multiple-unix-servers.
                                                             (line   69)
* environment variable, MYSQL_UNIX_PORT <3>: programs-overview.
                                                             (line  276)
* environment variable, MYSQL_UNIX_PORT <4>: environment-variables.
                                                             (line   18)
* environment variable, MYSQL_UNIX_PORT: mysql-install-db-problems.
                                                             (line   84)
* environment variable, PATH <1>:        invoking-programs.  (line   48)
* environment variable, PATH <2>:        environment-variables.
                                                             (line   18)
* environment variable, PATH:            unix-postinstallation.
                                                             (line   68)
* environment variable, TMPDIR <1>:      temporary-files.    (line    6)
* environment variable, TMPDIR <2>:      programs-overview.  (line  276)
* environment variable, TMPDIR <3>:      environment-variables.
                                                             (line   18)
* environment variable, TMPDIR:          mysql-install-db-problems.
                                                             (line   84)
* environment variable, TZ <1>:          timezone-problems.  (line    6)
* environment variable, TZ:              environment-variables.
                                                             (line   18)
* environment variable, UMASK <1>:       file-permissions.   (line    6)
* environment variable, UMASK:           environment-variables.
                                                             (line   18)
* environment variable, UMASK_DIR <1>:   file-permissions.   (line   20)
* environment variable, UMASK_DIR:       environment-variables.
                                                             (line   18)
* environment variable, USER <1>:        connecting.         (line  238)
* environment variable, USER:            environment-variables.
                                                             (line   18)
* environment variables <1>:             access-denied.      (line  101)
* environment variables <2>:             setting-environment-variables.
                                                             (line    6)
* environment variables:                 programs-overview.  (line  273)
* environment variables, list of:        environment-variables.
                                                             (line    6)
* eq_ref join type, optimizer:           explain-output.     (line  257)
* equal (=):                             comparison-operators.
                                                             (line   64)
* Equals():                              functions-that-test-spatial-relationships-between-geometries.
                                                             (line   45)
* ER_ABORTING_CONNECTION:                connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_ACCESS_DENIED_ERROR:                connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_BAD_FIELD_ERROR:                    connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_BAD_HOST_ERROR:                     connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_BAD_TABLE_ERROR:                    connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_BLOB_CANT_HAVE_DEFAULT:             connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_BLOB_KEY_WITHOUT_LENGTH:            connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_BLOB_USED_AS_KEY:                   connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_BLOBS_AND_NO_TERMINATED:            connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_CANT_DO_THIS_DURING_AN_TRANSACTION: connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_CANT_DROP_FIELD_OR_KEY:             connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_CANT_REMOVE_ALL_FIELDS:             connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_CANT_USE_OPTION_HERE:               connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_CHECK_NO_SUCH_TABLE:                connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_CHECK_NOT_IMPLEMENTED:              connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_COLLATION_CHARSET_MISMATCH:         connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_COLUMNACCESS_DENIED_ERROR:          connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_CON_COUNT_ERROR:                    connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_CONNECT_TO_MASTER:                  connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_DBACCESS_DENIED_ERROR:              connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_DERIVED_MUST_HAVE_ALIAS:            connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_DUP_ENTRY:                          connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_DUP_FIELDNAME:                      connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_DUP_KEY:                            connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_DUP_KEYNAME:                        connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_DUP_UNIQUE:                         connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_EMPTY_QUERY:                        connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_FIELD_SPECIFIED_TWICE:              connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_FORCING_CLOSE:                      connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_GRANT_WRONG_HOST_OR_USER:           connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_HANDSHAKE_ERROR:                    connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_HOST_IS_BLOCKED:                    connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_HOST_NOT_PRIVILEGED:                connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_ILLEGAL_GRANT_FOR_TABLE:            connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_ILLEGAL_REFERENCE:                  connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_INVALID_DEFAULT:                    connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_INVALID_USE_OF_NULL:                connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_IPSOCK_ERROR:                       connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_KEY_COLUMN_DOES_NOT_EXITS:          connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_LOCK_DEADLOCK:                      connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_LOCK_WAIT_TIMEOUT:                  connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_MASTER_NET_READ:                    connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_MASTER_NET_WRITE:                   connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_MIX_OF_GROUP_FUNC_AND_FIELDS:       connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_MULTIPLE_PRI_KEY:                   connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NET_ERROR_ON_WRITE:                 connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NET_FCNTL_ERROR:                    connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NET_PACKET_TOO_LARGE:               connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NET_PACKETS_OUT_OF_ORDER:           connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NET_READ_ERROR:                     connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NET_READ_ERROR_FROM_PIPE:           connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NET_READ_INTERRUPTED:               connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NET_UNCOMPRESS_ERROR:               connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NET_WRITE_INTERRUPTED:              connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NEW_ABORTING_CONNECTION:            connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NO_DEFAULT:                         connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NO_PERMISSION_TO_CREATE_USER:       connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NO_REFERENCED_ROW:                  connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NO_SUCH_INDEX:                      connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NO_SUCH_TABLE:                      connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NON_UNIQ_ERROR:                     connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NONEXISTING_GRANT:                  connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NONEXISTING_TABLE_GRANT:            connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NONUNIQ_TABLE:                      connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NOT_ALLOWED_COMMAND:                connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NOT_SUPPORTED_AUTH_MODE:            connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NOT_SUPPORTED_YET:                  connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_NULL_COLUMN_IN_INDEX:               connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_OPERAND_COLUMNS:                    connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_OUT_OF_SORTMEMORY:                  connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_OUTOFMEMORY:                        connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_PARSE_ERROR:                        connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_PASSWORD_ANONYMOUS_USER:            connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_PASSWORD_NO_MATCH:                  connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_PASSWORD_NOT_ALLOWED:               connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_PRIMARY_CANT_HAVE_NULL:             connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_READ_ONLY_TRANSACTION:              connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_REGEXP_ERROR:                       connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_REQUIRES_PRIMARY_KEY:               connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_ROW_IS_REFERENCED:                  connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_SELECT_REDUCED:                     connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_SERVER_SHUTDOWN:                    connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_SPATIAL_CANT_HAVE_NULL:             connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_SUBQUERY_NO_1_ROW:                  connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_SYNTAX_ERROR:                       connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_TABLE_CANT_HANDLE_AUTO_INCREMENT:   connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_TABLE_CANT_HANDLE_BLOB:             connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_TABLE_EXISTS_ERROR:                 connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_TABLE_MUST_HAVE_COLUMNS:            connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_TABLEACCESS_DENIED_ERROR:           connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_TABLENAME_NOT_ALLOWED_HERE:         connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_TOO_BIG_FIELDLENGTH:                connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_TOO_BIG_ROWSIZE:                    connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_TOO_BIG_SELECT:                     connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_TOO_LONG_IDENT:                     connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_TOO_LONG_KEY:                       connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_TOO_LONG_STRING:                    connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_TOO_MANY_KEY_PARTS:                 connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_TOO_MANY_KEYS:                      connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_TOO_MANY_ROWS:                      connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_TOO_MANY_USER_CONNECTIONS:          connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_UNKNOWN_CHARACTER_SET:              connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_UNKNOWN_COM_ERROR:                  connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_UNKNOWN_PROCEDURE:                  connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_UNKNOWN_STORAGE_ENGINE:             connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_UNKNOWN_TABLE:                      connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_UNSUPPORTED_EXTENSION:              connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_USER_LIMIT_REACHED:                 connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WARN_DATA_OUT_OF_RANGE:             connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WARN_DATA_TRUNCATED:                connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WARN_NULL_TO_NOTNULL:               connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WARN_TOO_FEW_RECORDS:               connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WARN_TOO_MANY_RECORDS:              connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_AUTO_KEY:                     connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_COLUMN_NAME:                  connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_DB_NAME:                      connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_FIELD_SPEC:                   connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_FIELD_TERMINATORS:            connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_FIELD_WITH_GROUP:             connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_FK_DEF:                       connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_GROUP_FIELD:                  connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_KEY_COLUMN:                   connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_NAME_FOR_CATALOG:             connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_NAME_FOR_INDEX:               connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_NUMBER_OF_COLUMNS_IN_SELECT:  connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_OUTER_JOIN:                   connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_PARAMCOUNT_TO_PROCEDURE:      connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_SUM_SELECT:                   connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_TABLE_NAME:                   connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_TYPE_FOR_VAR:                 connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_VALUE_COUNT:                  connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_VALUE_COUNT_ON_ROW:           connector-j-reference-error-sqlstates.
                                                             (line    6)
* ER_WRONG_VALUE_FOR_VAR:                connector-j-reference-error-sqlstates.
                                                             (line    6)
* Errcode:                               perror.             (line    6)
* errno:                                 perror.             (line    6)
* error codes:                           connector-j-reference-error-sqlstates.
                                                             (line    6)
* ERROR Events (MySQL Cluster):          mysql-cluster-log-events.
                                                             (line  219)
* error log:                             glossary.           (line 1007)
* error logs (MySQL Cluster):            mysql-cluster-programs-ndbd.
                                                             (line  418)
* error messages, can't find file:       file-permissions.   (line    6)
* error messages, displaying:            perror.             (line    6)
* error messages, languages:             error-message-language.
                                                             (line    6)
* Error, thread command:                 thread-commands.    (line   50)
* error_count session variable:          server-system-variables.
                                                             (line 1698)
* ERROR_FOR_DIVISION_BY_ZERO SQL mode:   server-sql-mode.    (line  139)
* errors, access denied:                 error-access-denied.
                                                             (line    6)
* errors, and replication:               replication-features-slaveerrors.
                                                             (line    6)
* errors, checking tables for:           myisam-check.       (line    6)
* errors, common:                        problems.           (line   17)
* errors, directory checksum:            solaris-installation.
                                                             (line   11)
* errors, handling for UDFs:             udf-return-values.  (line    6)
* errors, in subqueries:                 subquery-errors.    (line    6)
* errors, known:                         bugs.               (line    6)
* errors, linking:                       c-api-building-clients.
                                                             (line   83)
* errors, list of:                       common-errors.      (line   28)
* errors, lost connection:               error-lost-connection.
                                                             (line    6)
* errors, reporting:                     bug-reports.        (line    6)
* errors, sources of information:        error-sources.      (line    6)
* escape (\\):                           string-literals.    (line   76)
* escape sequences, option files:        option-files.       (line  170)
* escape sequences, strings:             string-literals.    (line    6)
* estimating, query performance:         estimating-performance.
                                                             (line    6)
* event groups:                          set-global-sql-slave-skip-counter.
                                                             (line    6)
* event log format (MySQL Cluster):      mysql-cluster-log-events.
                                                             (line    6)
* event logs (MySQL Cluster) <1>:        mysql-cluster-logging-management-commands.
                                                             (line    6)
* event logs (MySQL Cluster):            mysql-cluster-event-reports.
                                                             (line   12)
* Event Scheduler:                       events.             (line   15)
* event scheduler:                       stored-programs-views.
                                                             (line   16)
* Event Scheduler, altering events:      alter-event.        (line    6)
* Event Scheduler, and MySQL privileges: events-privileges.  (line    6)
* Event Scheduler, and mysqladmin debug: events-status-info. (line    6)
* Event Scheduler, and replication:      replication-features-invoked.
                                                             (line    6)
* Event Scheduler, and SHOW PROCESSLIST: events-configuration.
                                                             (line   28)
* Event Scheduler, concepts:             events-overview.    (line    6)
* Event Scheduler, creating events:      create-event.       (line    6)
* Event Scheduler, dropping events:      drop-event.         (line    6)
* Event Scheduler, enabling and disabling: events-configuration.
                                                             (line   12)
* Event Scheduler, event metadata:       events-metadata.    (line    6)
* Event Scheduler, obtaining status information: events-status-info.
                                                             (line    6)
* Event Scheduler, SQL statements:       events-syntax.      (line    6)
* Event Scheduler, starting and stopping: events-configuration.
                                                             (line   12)
* event scheduler, thread states:        event-scheduler-thread-states.
                                                             (line    6)
* Event Scheduler, time representation:  events-metadata.    (line   21)
* event severity levels (MySQL Cluster): mysql-cluster-logging-management-commands.
                                                             (line   62)
* event types (MySQL Cluster) <1>:       mysql-cluster-log-events.
                                                             (line   20)
* event types (MySQL Cluster):           mysql-cluster-event-reports.
                                                             (line   49)
* event, restrictions:                   stored-program-restrictions.
                                                             (line    6)
* event-scheduler option, mysqld:        server-options.     (line  689)
* event_scheduler system variable:       server-system-variables.
                                                             (line 1704)
* events <1>:                            events.             (line   15)
* events:                                stored-programs-views.
                                                             (line   16)
* events option, mysqldump:              mysqldump.          (line  627)
* events, altering:                      alter-event.        (line    6)
* events, creating:                      create-event.       (line    6)
* events, dropping:                      drop-event.         (line    6)
* EVENTS, INFORMATION_SCHEMA table <1>:  events-table.       (line    6)
* EVENTS, INFORMATION_SCHEMA table:      events-privileges.  (line   70)
* events, metadata:                      events-metadata.    (line    6)
* events, status variables:              events-privileges.  (line  167)
* events_waits_current table, performance_schema: events-waits-current-table.
                                                             (line    6)
* events_waits_history table, performance_schema: events-waits-history-table.
                                                             (line    6)
* events_waits_history_long table, performance_schema: events-waits-history-long-table.
                                                             (line    6)
* events_waits_summary_by_instance table, performance_schema: event-wait-summary-tables.
                                                             (line    6)
* events_waits_summary_by_thread_by_event_name table, performance_schema: event-wait-summary-tables.
                                                             (line    6)
* events_waits_summary_global_by_event_name table, performance_schema: event-wait-summary-tables.
                                                             (line    6)
* eviction:                              glossary.           (line 1011)
* exact-value literals:                  precision-math.     (line   14)
* example option, mysqld_multi:          mysqld-multi.       (line   95)
* example programs, C API:               c-api-example-programs.
                                                             (line    6)
* EXAMPLE storage engine <1>:            example-storage-engine.
                                                             (line    6)
* EXAMPLE storage engine:                storage-engines.    (line   22)
* examples, compressed tables:           myisampack.         (line  122)
* examples, myisamchk output:            myisamchk-table-info.
                                                             (line    6)
* examples, queries:                     examples.           (line   18)
* exclude-databases option (ndb_restore): mysql-cluster-programs-ndb-restore.
                                                             (line  690)
* exclude-missing-columns option (ndb_restore): mysql-cluster-programs-ndb-restore.
                                                             (line  794)
* exclude-tables option (ndb_restore):   mysql-cluster-programs-ndb-restore.
                                                             (line  700)
* exclusive lock:                        glossary.           (line 1017)
* EXECUTE <1>:                           execute.            (line    6)
* EXECUTE:                               sql-syntax-prepared-statements.
                                                             (line   13)
* execute option (ndb_mgm):              mysql-cluster-programs-ndb-mgm.
                                                             (line   48)
* execute option, mysql:                 mysql-command-options.
                                                             (line  289)
* Execute, thread command:               thread-commands.    (line   52)
* ExecuteNonQuery method:                connector-net-tutorials-sql-command.
                                                             (line    6)
* ExecuteOnComputer <1>:                 mysql-cluster-api-definition.
                                                             (line   82)
* ExecuteOnComputer <2>:                 mysql-cluster-ndbd-definition.
                                                             (line   99)
* ExecuteOnComputer:                     mysql-cluster-mgm-definition.
                                                             (line   71)
* ExecuteReader method:                  connector-net-tutorials-sql-command.
                                                             (line    6)
* ExecuteScalar method:                  connector-net-tutorials-sql-command.
                                                             (line    6)
* executing SQL statements from text files <1>: mysql-batch-commands.
                                                             (line    6)
* executing SQL statements from text files: batch-mode.      (line    6)
* executing, thread state:               general-thread-states.
                                                             (line  117)
* Execution of init_command, thread state: general-thread-states.
                                                             (line  121)
* execution plan:                        execution-plan-information.
                                                             (line   14)
* execution threads (MySQL Cluster):     mysql-cluster-ndbd-definition.
                                                             (line 2932)
* EXISTS, with subqueries:               exists-and-not-exists-subqueries.
                                                             (line    6)
* EXIT command (MySQL Cluster):          mysql-cluster-mgm-client-commands.
                                                             (line  176)
* exit command, mysql:                   mysql-commands.     (line  130)
* EXIT SINGLE USER MODE command (MySQL Cluster): mysql-cluster-mgm-client-commands.
                                                             (line  166)
* exit-info option, mysqld:              server-options.     (line  712)
* EXP():                                 mathematical-functions.
                                                             (line  195)
* expire_logs_days system variable:      server-system-variables.
                                                             (line 1729)
* EXPLAIN <1>:                           explain.            (line    6)
* EXPLAIN:                               using-explain.      (line    6)
* EXPLAIN PARTITIONS:                    partitioning-info.  (line    6)
* EXPLAIN used with partitioned tables:  partitioning-info.  (line    6)
* explicit default values:               data-type-defaults. (line    6)
* EXPORT_SET():                          string-functions.   (line  246)
* expression aliases <1>:                select.             (line  108)
* expression aliases:                    group-by-extensions.
                                                             (line   83)
* expression syntax:                     expressions.        (line    6)
* expressions, extended:                 pattern-matching.   (line    6)
* extend-check option, myisamchk <1>:    myisamchk-repair-options.
                                                             (line   28)
* extend-check option, myisamchk:        myisamchk-check-options.
                                                             (line   18)
* extended option, mysqlcheck:           mysqlcheck.         (line  286)
* extended-insert option, mysqldump:     mysqldump.          (line  632)
* extensions, to standard SQL:           compatibility.      (line   15)
* extent:                                glossary.           (line 1025)
* ExteriorRing():                        polygon-property-functions.
                                                             (line   21)
* external locking <1>:                  general-thread-states.
                                                             (line  320)
* external locking <2>:                  external-locking.   (line    6)
* external locking <3>:                  myisam-crash-recovery.
                                                             (line    6)
* external locking <4>:                  server-system-variables.
                                                             (line 5280)
* external locking:                      server-options.     (line  729)
* external-locking option, mysqld:       server-options.     (line  729)
* external_user session variable:        server-system-variables.
                                                             (line 1756)
* extra-file option, my_print_defaults:  my-print-defaults.  (line   43)
* extra-node-info option, ndb_desc:      mysql-cluster-programs-ndb-desc.
                                                             (line  292)
* extra-partition-info option, ndb_desc: mysql-cluster-programs-ndb-desc.
                                                             (line  303)
* EXTRACT():                             date-and-time-functions.
                                                             (line  540)
* extracting, dates:                     date-calculations.  (line    6)
* ExtractValue():                        xml-functions.      (line  150)
* ExtraSendBufferMemory, API nodes:      mysql-cluster-api-definition.
                                                             (line  190)
* ExtraSendBufferMemory, data nodes:     mysql-cluster-ndbd-definition.
                                                             (line 3577)
* ExtraSendBufferMemory, management nodes: mysql-cluster-mgm-definition.
                                                             (line  261)
* failover, in MySQL Cluster replication: mysql-cluster-replication-failover.
                                                             (line    6)
* failover, Java clients <1>:            connector-j-reference-configuration-properties.
                                                             (line   77)
* failover, Java clients:                mysql-cluster-basics.
                                                             (line  115)
* FALSE <1>:                             boolean-literals.   (line    6)
* FALSE:                                 number-literals.    (line    6)
* FALSE, testing for:                    comparison-operators.
                                                             (line  130)
* FAQs, Connector/ODBC:                  connector-odbc-usagenotes.
                                                             (line   12)
* Fast Index Creation:                   glossary.           (line 1036)
* Fast Index Creation, concurrency:      innodb-create-index-concurrency.
                                                             (line    6)
* Fast Index Creation, crash recovery:   innodb-create-index-recovery.
                                                             (line    6)
* Fast Index Creation, examples:         innodb-create-index-examples.
                                                             (line    6)
* Fast Index Creation, implementation:   innodb-create-index-implementation.
                                                             (line    6)
* Fast Index Creation, limitations:      innodb-create-index-limitations.
                                                             (line    6)
* Fast Index Creation, overview:         innodb-create-index-overview.
                                                             (line    6)
* fast option, myisamchk:                myisamchk-check-options.
                                                             (line   35)
* fast option, mysqlcheck:               mysqlcheck.         (line  302)
* fast shutdown:                         glossary.           (line 1054)
* features of MySQL:                     features.           (line    6)
* FEDERATED storage engine <1>:          federated-storage-engine.
                                                             (line   13)
* FEDERATED storage engine:              storage-engines.    (line   22)
* FETCH:                                 fetch.              (line    6)
* Fetch, thread command:                 thread-commands.    (line   56)
* Field List, thread command:            thread-commands.    (line   61)
* FIELD():                               string-functions.   (line  264)
* field, changing:                       alter-table.        (line  348)
* fields option, ndb_config:             mysql-cluster-programs-ndb-config.
                                                             (line  324)
* fields-enclosed-by option (ndb_restore): mysql-cluster-programs-ndb-restore.
                                                             (line  457)
* fields-enclosed-by option, mysqldump <1>: mysqlimport.     (line  189)
* fields-enclosed-by option, mysqldump:  mysqldump.          (line  640)
* fields-escaped-by option, mysqldump <1>: mysqlimport.      (line  193)
* fields-escaped-by option, mysqldump:   mysqldump.          (line  644)
* fields-optionally-enclosed-by option (ndb_restore): mysql-cluster-programs-ndb-restore.
                                                             (line  471)
* fields-optionally-enclosed-by option, mysqldump <1>: mysqlimport.
                                                             (line  191)
* fields-optionally-enclosed-by option, mysqldump: mysqldump.
                                                             (line  642)
* fields-terminated-by option (ndb_restore): mysql-cluster-programs-ndb-restore.
                                                             (line  487)
* fields-terminated-by option, mysqldump <1>: mysqlimport.   (line  187)
* fields-terminated-by option, mysqldump: mysqldump.         (line  638)
* FILE:                                  string-functions.   (line  394)
* file format <1>:                       glossary.           (line 1063)
* file format:                           innodb-file-format. (line   14)
* file format management, downgrading:   innodb-downgrading-overview.
                                                             (line    6)
* file format management, enabling new file formats: innodb-other-changes-file-formats.
                                                             (line    6)
* file format, Antelope:                 innodb-compression-internals.
                                                             (line  110)
* file format, Barracuda:                innodb-compression-usage.
                                                             (line   11)
* file format, downgrading:              innodb-file-format-downgrading.
                                                             (line    6)
* file format, identifying:              innodb-file-format-identifying.
                                                             (line    6)
* file per table:                        innodb-other-changes-innodb_file_per_table.
                                                             (line    6)
* file-per-table:                        glossary.           (line 1071)
* file_instances table, performance_schema: file-instances-table.
                                                             (line    6)
* file_summary_by_event_name table, performance_schema: file-summary-tables.
                                                             (line    6)
* file_summary_by_instance table, performance_schema: file-summary-tables.
                                                             (line    6)
* files, binary log:                     binary-log.         (line   13)
* files, error messages:                 error-message-language.
                                                             (line    6)
* files, general query log:              query-log.          (line    6)
* FILES, INFORMATION_SCHEMA table:       files-table.        (line    6)
* files, log:                            log-file-maintenance.
                                                             (line    6)
* files, my.cnf:                         replication-features.
                                                             (line   45)
* files, not found message:              file-permissions.   (line    6)
* files, permissions:                    file-permissions.   (line    6)
* files, repairing:                      myisamchk-repair-options.
                                                             (line    6)
* files, script:                         batch-mode.         (line    6)
* files, size limits:                    table-size-limit.   (line    6)
* files, slow query log:                 slow-query-log.     (line    6)
* files, text <1>:                       mysqlimport.        (line    6)
* files, text:                           mysql-batch-commands.
                                                             (line    6)
* files, tmp:                            mysql-install-db-problems.
                                                             (line   70)
* filesort optimization:                 order-by-optimization.
                                                             (line  132)
* FileSystemPath:                        mysql-cluster-ndbd-definition.
                                                             (line  257)
* FileSystemPathDataFiles:               mysql-cluster-ndbd-definition.
                                                             (line 3344)
* FileSystemPathDD:                      mysql-cluster-ndbd-definition.
                                                             (line 3311)
* FileSystemPathUndoFiles:               mysql-cluster-ndbd-definition.
                                                             (line 3372)
* fill factor:                           glossary.           (line 1092)
* FIND_IN_SET():                         string-functions.   (line  283)
* Finished reading one binlog; switching to next binlog, thread state: master-thread-states.
                                                             (line   17)
* firewalls (software), and MySQL Cluster: mysql-cluster-security-networking-issues.
                                                             (line   98)
* first-slave option, mysqldump:         mysqldump.          (line  650)
* fix-db-names option, mysqlcheck:       mysqlcheck.         (line  306)
* fix-table-names option, mysqlcheck:    mysqlcheck.         (line  311)
* FIXED data type:                       numeric-type-overview.
                                                             (line  186)
* fixed row format:                      glossary.           (line 1103)
* fixed-point arithmetic:                precision-math.     (line   14)
* FLOAT data type:                       numeric-type-overview.
                                                             (line  194)
* floating-point number:                 numeric-type-overview.
                                                             (line  241)
* floating-point values, and replication: replication-features-floatvalues.
                                                             (line    6)
* floats:                                number-literals.    (line    6)
* FLOOR():                               mathematical-functions.
                                                             (line  208)
* flush:                                 glossary.           (line 1109)
* FLUSH:                                 flush.              (line    6)
* flush list:                            glossary.           (line 1122)
* flush list mutex:                      innodb-separate-flush-list-mutex.
                                                             (line    6)
* flush option, mysqld:                  server-options.     (line  754)
* flush system variable:                 server-system-variables.
                                                             (line 1776)
* flush tables:                          mysqladmin.         (line  195)
* FLUSH, and replication:                replication-features-flush.
                                                             (line    6)
* flush-logs option, mysqldump:          mysqldump.          (line  655)
* flush-privileges option, mysqldump:    mysqldump.          (line  668)
* flush_time system variable:            server-system-variables.
                                                             (line 1799)
* Flushing tables, thread state:         general-thread-states.
                                                             (line  132)
* flushlog option, mysqlhotcopy:         mysqlhotcopy.       (line  117)
* FOR UPDATE:                            select.             (line  351)
* FORCE INDEX <1>:                       optimizer-issues.   (line   27)
* FORCE INDEX:                           index-hints.        (line    6)
* FORCE KEY:                             index-hints.        (line    6)
* force option, myisamchk <1>:           myisamchk-repair-options.
                                                             (line   40)
* force option, myisamchk:               myisamchk-check-options.
                                                             (line   39)
* force option, myisampack:              myisampack.         (line   66)
* force option, mysql:                   mysql-command-options.
                                                             (line  296)
* force option, mysql_convert_table_format: mysql-convert-table-format.
                                                             (line   28)
* force option, mysql_install_db:        mysql-install-db.   (line   61)
* force option, mysql_upgrade:           mysql-upgrade.      (line  189)
* force option, mysqladmin:              mysqladmin.         (line  372)
* force option, mysqlcheck:              mysqlcheck.         (line  316)
* force option, mysqldump:               mysqldump.          (line  676)
* force option, mysqlimport:             mysqlimport.        (line  198)
* force-if-open option, mysqlbinlog:     mysqlbinlog.        (line  352)
* force-read option, mysqlbinlog:        mysqlbinlog.        (line  357)
* foreign key:                           glossary.           (line 1128)
* FOREIGN KEY constraint:                glossary.           (line 1150)
* foreign key constraints:               create-table-foreign-keys.
                                                             (line    6)
* FOREIGN KEY constraints, and fast index creation: innodb-create-index-limitations.
                                                             (line    6)
* FOREIGN KEY constraints, and TRUNCATE TABLE: innodb-other-changes-truncate.
                                                             (line    6)
* foreign key constraints, InnoDB:       innodb-foreign-key-constraints.
                                                             (line    6)
* foreign key constraints, restrictions: innodb-foreign-key-constraints.
                                                             (line    6)
* foreign key, constraint <1>:           constraint-foreign-key.
                                                             (line    6)
* foreign key, constraint:               constraint-primary-key.
                                                             (line    6)
* foreign key, deleting <1>:             create-table-foreign-keys.
                                                             (line  204)
* foreign key, deleting:                 alter-table.        (line  475)
* foreign keys <1>:                      connector-net-visual-studio-editing-tables-foreign-keys.
                                                             (line    6)
* foreign keys <2>:                      alter-table.        (line  445)
* foreign keys <3>:                      example-foreign-keys.
                                                             (line    6)
* foreign keys:                          ansi-diff-foreign-keys.
                                                             (line    6)
* foreign_key_checks session variable:   server-system-variables.
                                                             (line 1821)
* FORMAT():                              string-functions.   (line  298)
* Forums:                                forums.             (line    6)
* FOUND_ROWS():                          information-functions.
                                                             (line  220)
* FragmentLogFileSize:                   mysql-cluster-ndbd-definition.
                                                             (line 1044)
* FreeBSD troubleshooting:               compilation-problems.
                                                             (line   73)
* freeing items, thread state:           general-thread-states.
                                                             (line  126)
* frequently-asked questions about MySQL Cluster: faqs-mysql-cluster.
                                                             (line    6)
* FROM:                                  select.             (line  136)
* FROM_DAYS():                           date-and-time-functions.
                                                             (line  556)
* FROM_UNIXTIME():                       date-and-time-functions.
                                                             (line  567)
* ft_boolean_syntax system variable:     server-system-variables.
                                                             (line 1842)
* ft_max_word_len myisamchk variable:    myisamchk-general-options.
                                                             (line   53)
* ft_max_word_len system variable:       server-system-variables.
                                                             (line 1881)
* ft_min_word_len myisamchk variable:    myisamchk-general-options.
                                                             (line   53)
* ft_min_word_len system variable:       server-system-variables.
                                                             (line 1905)
* ft_query_expansion_limit system variable: server-system-variables.
                                                             (line 1930)
* ft_stopword_file myisamchk variable:   myisamchk-general-options.
                                                             (line   53)
* ft_stopword_file system variable:      server-system-variables.
                                                             (line 1951)
* FTS:                                   glossary.           (line 1179)
* full backup:                           glossary.           (line 1182)
* full disk:                             full-disk.          (line    6)
* full table scan:                       glossary.           (line 1186)
* full table scans, avoiding:            how-to-avoid-table-scan.
                                                             (line    6)
* full-text parser plugins:              full-text-plugins.  (line    6)
* full-text search <1>:                  glossary.           (line 1198)
* full-text search:                      fulltext-search.    (line   16)
* FULLTEXT:                              fulltext-search.    (line   16)
* FULLTEXT index:                        glossary.           (line 1204)
* FULLTEXT initialization, thread state: general-thread-states.
                                                             (line  137)
* fulltext join type, optimizer:         explain-output.     (line  300)
* fulltext, stopword list:               fulltext-fine-tuning.
                                                             (line   40)
* function names, parsing:               function-resolution.
                                                             (line    6)
* function names, resolving ambiguity:   function-resolution.
                                                             (line    6)
* function, creating:                    create-function-udf.
                                                             (line    6)
* function, deleting:                    drop-function-udf.  (line    6)
* functions:                             functions.          (line   27)
* functions, and replication:            replication-features-functions.
                                                             (line    6)
* functions, arithmetic:                 bit-functions.      (line    6)
* functions, bit:                        bit-functions.      (line    6)
* functions, C API:                      c-api-function-overview.
                                                             (line    6)
* functions, C prepared statement API <1>: c-api-prepared-statement-function-overview.
                                                             (line    6)
* functions, C prepared statement API:   c-api-prepared-statement-type-conversions.
                                                             (line    6)
* functions, cast:                       cast-functions.     (line    6)
* functions, control flow:               control-flow-functions.
                                                             (line    6)
* functions, date and time:              date-and-time-functions.
                                                             (line    6)
* functions, encryption:                 encryption-functions.
                                                             (line    6)
* functions, for SELECT and WHERE clauses: functions.        (line   27)
* functions, GROUP BY:                   group-by-functions. (line    6)
* functions, grouping:                   operator-precedence.
                                                             (line   48)
* functions, information:                information-functions.
                                                             (line    6)
* functions, mathematical:               mathematical-functions.
                                                             (line   52)
* functions, miscellaneous:              miscellaneous-functions.
                                                             (line    6)
* functions, native, adding:             adding-native-function.
                                                             (line    6)
* functions, new:                        adding-functions.   (line   12)
* functions, stored:                     stored-routines.    (line   13)
* functions, string:                     string-functions.   (line   11)
* functions, string comparison:          string-comparison-functions.
                                                             (line    6)
* functions, user-defined <1>:           adding-functions.   (line   12)
* functions, user-defined <2>:           drop-function-udf.  (line    6)
* functions, user-defined:               create-function-udf.
                                                             (line    6)
* functions, user-defined, adding:       adding-udf.         (line   15)
* fuzzy checkpointing:                   glossary.           (line 1210)
* GA:                                    glossary.           (line 1216)
* gap:                                   glossary.           (line 1219)
* gap event:                             mysql-cluster-replication-issues.
                                                             (line   29)
* gap lock:                              glossary.           (line 1229)
* gap lock, InnoDB <1>:                  innodb-next-key-locking.
                                                             (line    6)
* gap lock, InnoDB <2>:                  innodb-record-level-locks.
                                                             (line    6)
* gap lock, InnoDB <3>:                  innodb-transaction-model.
                                                             (line   71)
* gap lock, InnoDB:                      innodb-parameters.  (line 1173)
* gb2312, gbk:                           faqs-cjk.           (line    6)
* gci option, ndb_select_all:            mysql-cluster-programs-ndb-select-all.
                                                             (line  125)
* GCP Stop errors (MySQL Cluster):       mysql-cluster-ndbd-definition.
                                                             (line 3538)
* gdb option, mysqld:                    server-options.     (line  775)
* gdb, using:                            using-gdb-on-mysqld.
                                                             (line    6)
* general information:                   introduction.       (line   18)
* General Public License:                what-is-mysql.      (line   54)
* general query log <1>:                 glossary.           (line 1241)
* general query log:                     query-log.          (line    6)
* general-log option, mysqld:            server-options.     (line  791)
* general_log system variable:           server-system-variables.
                                                             (line 1982)
* general_log_file system variable:      server-system-variables.
                                                             (line 2005)
* geographic feature:                    gis-introduction.   (line   27)
* GeomCollFromText():                    gis-wkt-functions.  (line   14)
* GeomCollFromWKB():                     gis-wkb-functions.  (line   16)
* geometry:                              gis-introduction.   (line   40)
* GEOMETRY data type:                    mysql-spatial-datatypes.
                                                             (line    6)
* GEOMETRYCOLLECTION data type:          mysql-spatial-datatypes.
                                                             (line    6)
* GeometryCollection():                  gis-mysql-specific-functions.
                                                             (line   20)
* GeometryCollectionFromText():          gis-wkt-functions.  (line   14)
* GeometryCollectionFromWKB():           gis-wkb-functions.  (line   16)
* GeometryFromText():                    gis-wkt-functions.  (line   20)
* GeometryFromWKB():                     gis-wkb-functions.  (line   22)
* GeometryN():                           geometrycollection-property-functions.
                                                             (line    8)
* GeometryType():                        general-geometry-property-functions.
                                                             (line   38)
* GeomFromText() <1>:                    functions-to-convert-geometries-between-formats.
                                                             (line   29)
* GeomFromText():                        gis-wkt-functions.  (line   20)
* GeomFromWKB() <1>:                     functions-to-convert-geometries-between-formats.
                                                             (line   36)
* GeomFromWKB():                         gis-wkb-functions.  (line   22)
* geospatial feature:                    gis-introduction.   (line   37)
* GET_FORMAT():                          date-and-time-functions.
                                                             (line  595)
* GET_LOCK():                            miscellaneous-functions.
                                                             (line   42)
* getting MySQL:                         getting-mysql.      (line    6)
* GIS <1>:                               gis-introduction.   (line    6)
* GIS:                                   spatial-extensions. (line   16)
* Glassfish application server:          connector-j-usagenotes-glassfish-config.
                                                             (line   11)
* GLength() <1>:                         multilinestring-property-functions.
                                                             (line    8)
* GLength():                             linestring-property-functions.
                                                             (line   23)
* global privileges <1>:                 revoke.             (line    6)
* global privileges:                     grant.              (line    6)
* GLOBAL_STATUS, INFORMATION_SCHEMA table: status-table.     (line    6)
* global_transaction:                    glossary.           (line 1253)
* GLOBAL_VARIABLES, INFORMATION_SCHEMA table: variables-table.
                                                             (line    6)
* globalization:                         globalization.      (line   16)
* go command, mysql:                     mysql-commands.     (line  134)
* Google Test:                           source-configuration-options.
                                                             (line  445)
* got handler lock, thread state:        delayed-insert-thread-states.
                                                             (line   26)
* got old table, thread state:           delayed-insert-thread-states.
                                                             (line   32)
* GRANT:                                 grant.              (line    6)
* GRANT statement:                       adding-users.       (line    6)
* grant table distribution (MySQL Cluster): mysql-cluster-privilege-distribution.
                                                             (line    6)
* grant tables, re-creating:             mysql-install-db-problems.
                                                             (line  104)
* grant tables, sorting <1>:             request-access.     (line   51)
* grant tables, sorting:                 connection-access.  (line  130)
* grant tables, structure:               grant-table-structure.
                                                             (line    6)
* granting, privileges:                  grant.              (line    6)
* GRANTS:                                show-grants.        (line    6)
* greater than (>):                      comparison-operators.
                                                             (line  123)
* greater than or equal (>=):            comparison-operators.
                                                             (line  116)
* greatest timestamp wins (conflict resolution): mysql-cluster-replication-conflict-resolution.
                                                             (line  282)
* greatest timestamp, delete wins (conflict resolution): mysql-cluster-replication-conflict-resolution.
                                                             (line  308)
* GREATEST():                            comparison-operators.
                                                             (line  240)
* GROUP BY:                              group-by-optimization.
                                                             (line   11)
* GROUP BY functions:                    group-by-functions. (line    6)
* GROUP BY, aliases in:                  group-by-extensions.
                                                             (line   83)
* GROUP BY, extensions to standard SQL <1>: select.          (line  214)
* GROUP BY, extensions to standard SQL:  group-by-extensions.
                                                             (line    6)
* group commit <1>:                      glossary.           (line 1262)
* group commit:                          innodb-performance-group_commit.
                                                             (line    6)
* GROUP_CONCAT():                        group-by-functions. (line  137)
* group_concat_max_len system variable:  server-system-variables.
                                                             (line 2026)
* grouping, expressions:                 operator-precedence.
                                                             (line   48)
* HANDLER:                               handler.            (line    6)
* Handlers:                              declare-handler.    (line    6)
* handling, errors:                      udf-return-values.  (line    6)
* hash index:                            glossary.           (line 1272)
* hash indexes:                          index-btree-hash.   (line    6)
* hash partitioning:                     partitioning-hash.  (line   10)
* hash partitions, managing:             partitioning-management-hash-key.
                                                             (line    6)
* hash partitions, splitting and merging: partitioning-management-hash-key.
                                                             (line    6)
* have_compress system variable:         server-system-variables.
                                                             (line 2056)
* have_crypt system variable:            server-system-variables.
                                                             (line 2062)
* have_csv system variable:              server-system-variables.
                                                             (line 2067)
* have_dynamic_loading system variable:  server-system-variables.
                                                             (line 2075)
* HAVE_EMBEDDED_PRIVILEGE_CONTROL option, CMake: source-configuration-options.
                                                             (line  591)
* have_geometry system variable:         server-system-variables.
                                                             (line 2080)
* have_innodb system variable:           server-system-variables.
                                                             (line 2084)
* have_openssl system variable:          server-system-variables.
                                                             (line 2092)
* have_partitioning system variable:     server-system-variables.
                                                             (line 2096)
* have_profiling system variable:        server-system-variables.
                                                             (line 2104)
* have_query_cache system variable:      server-system-variables.
                                                             (line 2110)
* have_rtree_keys system variable:       server-system-variables.
                                                             (line 2115)
* have_ssl system variable:              server-system-variables.
                                                             (line 2120)
* have_symlink system variable:          server-system-variables.
                                                             (line 2127)
* HAVING:                                select.             (line  228)
* HDD:                                   glossary.           (line 1283)
* header option, ndb_select_all:         mysql-cluster-programs-ndb-select-all.
                                                             (line   98)
* header_file option, comp_err:          comp-err.           (line   43)
* HEAP storage engine <1>:               memory-storage-engine.
                                                             (line    6)
* HEAP storage engine:                   storage-engines.    (line   22)
* heartbeat:                             glossary.           (line 1288)
* HeartbeatIntervalDbApi:                mysql-cluster-ndbd-definition.
                                                             (line 1774)
* HeartbeatIntervalDbDb:                 mysql-cluster-ndbd-definition.
                                                             (line 1747)
* HeartbeatOrder:                        mysql-cluster-ndbd-definition.
                                                             (line 1800)
* HeartbeatThreadPriority <1>:           mysql-cluster-api-definition.
                                                             (line  206)
* HeartbeatThreadPriority:               mysql-cluster-mgm-definition.
                                                             (line  238)
* HELP command (MySQL Cluster):          mysql-cluster-mgm-client-commands.
                                                             (line   34)
* help command, mysql:                   mysql-commands.     (line   51)
* help option (MySQL Cluster programs):  mysql-cluster-program-options-common.
                                                             (line   82)
* help option, comp_err:                 comp-err.           (line   25)
* help option, my_print_defaults:        my-print-defaults.  (line   25)
* help option, myisam_ftdump:            myisam-ftdump.      (line   58)
* HELP option, myisamchk:                myisamchk-general-options.
                                                             (line   16)
* help option, myisamchk:                myisamchk-general-options.
                                                             (line   11)
* help option, myisampack:               myisampack.         (line   47)
* help option, mysql:                    mysql-command-options.
                                                             (line  162)
* help option, mysql_convert_table_format: mysql-convert-table-format.
                                                             (line   24)
* help option, mysql_find_rows:          mysql-find-rows.    (line   28)
* help option, mysql_plugin:             mysql-plugin.       (line   94)
* help option, mysql_setpermission:      mysql-setpermission.
                                                             (line   29)
* help option, mysql_upgrade:            mysql-upgrade.      (line  158)
* help option, mysql_waitpid:            mysql-waitpid.      (line   27)
* help option, mysqlaccess:              mysqlaccess.        (line   67)
* help option, mysqladmin:               mysqladmin.         (line  310)
* help option, mysqlbinlog:              mysqlbinlog.        (line  166)
* help option, mysqlcheck:               mysqlcheck.         (line  198)
* help option, mysqld:                   server-options.     (line   72)
* help option, mysqld_multi:             mysqld-multi.       (line   85)
* help option, mysqld_safe:              mysqld-safe.        (line  111)
* help option, mysqldump:                mysqldump.          (line  405)
* help option, mysqldumpslow:            mysqldumpslow.      (line   45)
* help option, mysqlhotcopy:             mysqlhotcopy.       (line   84)
* help option, mysqlimport:              mysqlimport.        (line  127)
* help option, MySQLInstallerConsole:    MySQLInstallerConsole.
                                                             (line   24)
* help option, mysqlshow:                mysqlshow.          (line  114)
* help option, mysqlslap:                mysqlslap.          (line  206)
* help option, perror:                   perror.             (line   40)
* help option, resolve_stack_dump:       resolve-stack-dump. (line   21)
* help option, resolveip:                resolveip.          (line   15)
* HELP statement:                        help.               (line    6)
* hex option (ndb_restore):              mysql-cluster-programs-ndb-restore.
                                                             (line  502)
* HEX() <1>:                             mathematical-functions.
                                                             (line  227)
* HEX():                                 string-functions.   (line  320)
* hex-blob option, mysqldump:            mysqldump.          (line  694)
* hexadecimal literals:                  hexadecimal-literals.
                                                             (line    6)
* hexdump option, mysqlbinlog:           mysqlbinlog.        (line  364)
* high-water mark:                       glossary.           (line 1294)
* HIGH_NOT_PRECEDENCE SQL mode:          server-sql-mode.    (line  152)
* HIGH_PRIORITY:                         select.             (line  370)
* hints:                                 extensions-to-ansi. (line    6)
* hints, index <1>:                      index-hints.        (line    6)
* hints, index:                          select.             (line  144)
* history list:                          glossary.           (line 1298)
* history of MySQL:                      history.            (line    6)
* HOME environment variable <1>:         mysql-logging.      (line    6)
* HOME environment variable:             environment-variables.
                                                             (line   18)
* host name caching:                     host-cache.         (line    6)
* host name resolution:                  host-cache.         (line    6)
* host name, default:                    connecting.         (line    6)
* host names, in account names:          account-names.      (line    6)
* host names, in default accounts:       default-privileges. (line    6)
* host option:                           connecting.         (line  132)
* host option, mysql:                    mysql-command-options.
                                                             (line  300)
* host option, mysql_convert_table_format: mysql-convert-table-format.
                                                             (line   32)
* host option, mysql_setpermission:      mysql-setpermission.
                                                             (line   33)
* host option, mysqlaccess:              mysqlaccess.        (line   94)
* host option, mysqladmin:               mysqladmin.         (line  377)
* host option, mysqlbinlog:              mysqlbinlog.        (line  370)
* host option, mysqlcheck:               mysqlcheck.         (line  320)
* host option, mysqldump:                mysqldump.          (line  689)
* host option, mysqlhotcopy:             mysqlhotcopy.       (line  121)
* host option, mysqlimport:              mysqlimport.        (line  204)
* host option, mysqlshow:                mysqlshow.          (line  169)
* host option, mysqlslap:                mysqlslap.          (line  333)
* host option, ndb_config:               mysql-cluster-programs-ndb-config.
                                                             (line  212)
* host table:                            request-access.     (line  148)
* host table, sorting:                   request-access.     (line   51)
* Host*SciId* parameters:                mysql-cluster-sci-definition.
                                                             (line   48)
* host.frm, problems finding:            unix-postinstallation.
                                                             (line  201)
* HostName <1>:                          mysql-cluster-api-definition.
                                                             (line   94)
* HostName <2>:                          mysql-cluster-ndbd-definition.
                                                             (line  111)
* HostName:                              mysql-cluster-mgm-definition.
                                                             (line   95)
* HostName (MySQL Cluster):              mysql-cluster-security-networking-issues.
                                                             (line   40)
* hostname system variable:              server-system-variables.
                                                             (line 2135)
* HostName1 <1>:                         mysql-cluster-sci-definition.
                                                             (line   98)
* HostName1 <2>:                         mysql-cluster-shm-definition.
                                                             (line   47)
* HostName1:                             mysql-cluster-tcp-definition.
                                                             (line   61)
* HostName2 <1>:                         mysql-cluster-sci-definition.
                                                             (line  108)
* HostName2 <2>:                         mysql-cluster-shm-definition.
                                                             (line   57)
* HostName2:                             mysql-cluster-tcp-definition.
                                                             (line   71)
* hot:                                   glossary.           (line 1308)
* hot backup:                            glossary.           (line 1315)
* HOUR():                                date-and-time-functions.
                                                             (line  635)
* howto option, mysqlaccess:             mysqlaccess.        (line   98)
* html option, mysql:                    mysql-command-options.
                                                             (line  304)
* i-am-a-dummy option, mysql:            mysql-command-options.
                                                             (line  503)
* ib-file set <1>:                       glossary.           (line 1334)
* ib-file set:                           innodb-file-format-compatibility.
                                                             (line   11)
* ib_logfile:                            glossary.           (line 1341)
* ibbackup_logfile:                      glossary.           (line 1350)
* ibdata file:                           glossary.           (line 1378)
* ibtmp file:                            glossary.           (line 1391)
* icc, and MySQL Cluster support>:       porting.            (line   29)
* icc, MySQL builds:                     compiler-characteristics.
                                                             (line    6)
* Id <1>:                                mysql-cluster-api-definition.
                                                             (line   26)
* Id <2>:                                mysql-cluster-ndbd-definition.
                                                             (line   57)
* Id:                                    mysql-cluster-mgm-definition.
                                                             (line   16)
* id option, ndb_config:                 mysql-cluster-programs-ndb-config.
                                                             (line  241)
* ID, unique:                            getting-unique-id.  (line    6)
* identifiers:                           identifiers.        (line   13)
* identifiers, case sensitivity:         identifier-case-sensitivity.
                                                             (line    6)
* identifiers, quoting:                  identifiers.        (line   20)
* identity session variable:             server-system-variables.
                                                             (line 2149)
* IF:                                    if.                 (line    6)
* IF():                                  control-flow-functions.
                                                             (line   48)
* IFNULL():                              control-flow-functions.
                                                             (line   86)
* IGNORE INDEX:                          index-hints.        (line    6)
* IGNORE KEY:                            index-hints.        (line    6)
* ignore option, mysqlimport:            mysqlimport.        (line  209)
* IGNORE, with partitioned tables:       insert.             (line  264)
* ignore-builtin-innodb option, mysqld:  innodb-parameters.  (line  147)
* ignore-lines option, mysqlimport:      mysqlimport.        (line  213)
* ignore-spaces option, mysql:           mysql-command-options.
                                                             (line  308)
* ignore-table option, mysqldump:        mysqldump.          (line  709)
* IGNORE_AIO_CHECK option, CMake:        source-configuration-options.
                                                             (line  475)
* ignore_builtin_innodb system variable: innodb-parameters.  (line  211)
* IGNORE_SPACE SQL mode:                 server-sql-mode.    (line  167)
* ilist:                                 glossary.           (line 1413)
* implicit default values:               data-type-defaults. (line    6)
* implicit row lock:                     glossary.           (line 1417)
* IMPORT TABLESPACE <1>:                 innodb-multiple-tablespaces.
                                                             (line  187)
* IMPORT TABLESPACE:                     alter-table.        (line  486)
* importing, data <1>:                   mysqlimport.        (line    6)
* importing, data:                       mysql-batch-commands.
                                                             (line    6)
* IN <1>:                                any-in-some-subqueries.
                                                             (line    6)
* IN:                                    comparison-operators.
                                                             (line  255)
* in-memory database:                    glossary.           (line 1420)
* in_file option, comp_err:              comp-err.           (line   47)
* include option, mysql_config:          mysql-config.       (line   22)
* include-databases option (ndb_restore): mysql-cluster-programs-ndb-restore.
                                                             (line  623)
* include-master-host-port option, mysqldump: mysqldump.     (line  701)
* include-tables option (ndb_restore):   mysql-cluster-programs-ndb-restore.
                                                             (line  633)
* increasing with replication, speed:    replication.        (line   13)
* incremental backup:                    glossary.           (line 1433)
* incremental recovery:                  point-in-time-recovery.
                                                             (line   11)
* incremental recovery, using MySQL Cluster replication: mysql-cluster-replication-pitr.
                                                             (line    6)
* index:                                 glossary.           (line 1446)
* index cache:                           glossary.           (line 1467)
* INDEX DIRECTORY, and replication:      replication-features-directory.
                                                             (line    6)
* index dives (for statistics estimation): innodb-other-changes-statistics-estimation.
                                                             (line    6)
* index hint:                            glossary.           (line 1476)
* index hints <1>:                       index-hints.        (line    6)
* index hints:                           select.             (line  144)
* index join type, optimizer:            explain-output.     (line  366)
* index prefix:                          glossary.           (line 1482)
* index, deleting <1>:                   drop-index.         (line    6)
* index, deleting:                       alter-table.        (line  355)
* index, rebuilding:                     rebuilding-tables.  (line    6)
* index-record lock, InnoDB <1>:         innodb-next-key-locking.
                                                             (line    6)
* index-record lock, InnoDB <2>:         innodb-record-level-locks.
                                                             (line    6)
* index-record lock, InnoDB <3>:         innodb-transaction-model.
                                                             (line   71)
* index-record lock, InnoDB:             innodb-parameters.  (line 1173)
* index_merge join type, optimizer:      explain-output.     (line  317)
* index_subquery join type, optimizer:   explain-output.     (line  335)
* indexes:                               create-index.       (line    6)
* indexes, and BLOB columns <1>:         create-table.       (line  489)
* indexes, and BLOB columns:             column-indexes.     (line   18)
* indexes, and IS NULL:                  index-btree-hash.   (line   39)
* indexes, and LIKE:                     index-btree-hash.   (line   13)
* indexes, and NULL values:              create-table.       (line  468)
* indexes, and TEXT columns <1>:         create-table.       (line  489)
* indexes, and TEXT columns:             column-indexes.     (line   18)
* indexes, assigning to key cache:       cache-index.        (line    6)
* indexes, block size:                   server-system-variables.
                                                             (line 2370)
* indexes, columns:                      column-indexes.     (line    6)
* indexes, creating and dropping:        innodb-create-index-implementation.
                                                             (line    6)
* indexes, leftmost prefix of:           multiple-column-indexes.
                                                             (line   83)
* indexes, multi-column:                 multiple-column-indexes.
                                                             (line    6)
* indexes, multiple-part:                create-index.       (line    6)
* indexes, names:                        identifiers.        (line   13)
* indexes, primary (clustered) and secondary: innodb-create-index-implementation.
                                                             (line    6)
* indexes, use of:                       mysql-indexes.      (line    6)
* Indexes/Keys dialog:                   connector-net-visual-studio-editing-tables-indexes.
                                                             (line    6)
* IndexMemory:                           mysql-cluster-ndbd-definition.
                                                             (line  413)
* INET_ATON():                           miscellaneous-functions.
                                                             (line  102)
* INET_NTOA():                           miscellaneous-functions.
                                                             (line  128)
* infimum record:                        glossary.           (line 1488)
* INFO Events (MySQL Cluster):           mysql-cluster-log-events.
                                                             (line  237)
* information functions:                 information-functions.
                                                             (line    6)
* information option, myisamchk:         myisamchk-check-options.
                                                             (line   45)
* information schema tables:             innodb-information-schema.
                                                             (line   12)
* INFORMATION_SCHEMA <1>:                glossary.           (line 1495)
* INFORMATION_SCHEMA:                    information-schema. (line   40)
* INFORMATION_SCHEMA plugins:            information-schema-plugins.
                                                             (line    6)
* INFORMATION_SCHEMA, and security issues: mysql-cluster-security-mysql-privileges.
                                                             (line   96)
* INFORMATION_SCHEMA, collation and searching: charset-collation-information-schema.
                                                             (line    6)
* INFORMATION_SCHEMA, INNODB_CMP table:  innodb-information-schema-innodb_cmp.
                                                             (line    6)
* INFORMATION_SCHEMA, INNODB_CMP_RESET table: innodb-information-schema-innodb_cmp.
                                                             (line    6)
* INFORMATION_SCHEMA, INNODB_CMPMEM table: innodb-information-schema-innodb_cmpmem.
                                                             (line    6)
* INFORMATION_SCHEMA, INNODB_CMPMEM_RESET table: innodb-information-schema-innodb_cmpmem.
                                                             (line    6)
* INFORMATION_SCHEMA, INNODB_LOCK_WAITS table: innodb-information-schema-transactions.
                                                             (line   48)
* INFORMATION_SCHEMA, INNODB_LOCKS table: innodb-information-schema-transactions.
                                                             (line   26)
* INFORMATION_SCHEMA, INNODB_TRX table:  innodb-information-schema-transactions.
                                                             (line   16)
* INFORMATION_SCHEMA.ENGINES table, and MySQL Cluster: mysql-cluster-sql-statements.
                                                             (line   35)
* INFORMATION_SCHEMA.GLOBAL_STATUS table, and MySQL Cluster: mysql-cluster-sql-statements.
                                                             (line  158)
* INFORMATION_SCHEMA.GLOBAL_VARIABLES table, and MySQL Cluster: mysql-cluster-sql-statements.
                                                             (line   83)
* Init DB, thread command:               thread-commands.    (line   65)
* init, thread state:                    general-thread-states.
                                                             (line  142)
* init-command option, mysql:            mysql-command-options.
                                                             (line  314)
* init-file option, mysqld:              server-options.     (line  812)
* init_connect system variable:          server-system-variables.
                                                             (line 2156)
* init_file system variable:             server-system-variables.
                                                             (line 2197)
* init_slave system variable:            replication-options-slave.
                                                             (line 1200)
* InitFragmentLogFiles:                  mysql-cluster-ndbd-definition.
                                                             (line 1066)
* initial option (ndb_mgmd):             mysql-cluster-programs-ndb-mgmd.
                                                             (line  289)
* initial option (ndbd):                 mysql-cluster-programs-ndbd.
                                                             (line  170)
* initial option (ndbmtd):               mysql-cluster-programs-ndbd.
                                                             (line  170)
* initial-start option (ndbd):           mysql-cluster-programs-ndbd.
                                                             (line  230)
* initial-start option (ndbmtd):         mysql-cluster-programs-ndbd.
                                                             (line  230)
* Initialized, thread state:             event-scheduler-thread-states.
                                                             (line   15)
* InitialLogFileGroup:                   mysql-cluster-ndbd-definition.
                                                             (line 3409)
* InitialNoOfOpenFiles:                  mysql-cluster-ndbd-definition.
                                                             (line 1110)
* InitialTablespace:                     mysql-cluster-ndbd-definition.
                                                             (line 3478)
* INNER JOIN:                            join.               (line    6)
* innochecksum <1>:                      innochecksum.       (line    6)
* innochecksum:                          programs-overview.  (line  147)
* InnoDB <1>:                            glossary.           (line 1510)
* InnoDB:                                innodb-storage-engine.
                                                             (line   24)
* innodb option, mysqld:                 innodb-parameters.  (line  170)
* InnoDB parameters, deprecated:         innodb-parameters-deprecated.
                                                             (line    6)
* InnoDB parameters, deprecated, innodb_file_io_threads: innodb-performance-multiple_io_threads.
                                                             (line    6)
* InnoDB parameters, new:                innodb-parameters-new.
                                                             (line    6)
* InnoDB parameters, new, innodb_adaptive_flushing: innodb-performance-adaptive_flushing.
                                                             (line    6)
* InnoDB parameters, new, innodb_change_buffering: innodb-performance-change_buffering.
                                                             (line    6)
* InnoDB parameters, new, innodb_file_format: innodb-other-changes-file-formats.
                                                             (line    6)
* InnoDB parameters, new, innodb_file_format_check: innodb-file-format-compatibility-checking.
                                                             (line    6)
* InnoDB parameters, new, innodb_io_capacity: innodb-performance-thread_io_rate.
                                                             (line    6)
* InnoDB parameters, new, innodb_large_prefix: innodb-parameters.
                                                             (line 1078)
* InnoDB parameters, new, innodb_read_ahead_threshold: innodb-performance-read_ahead.
                                                             (line    6)
* InnoDB parameters, new, innodb_read_io_threads: innodb-performance-multiple_io_threads.
                                                             (line    6)
* InnoDB parameters, new, innodb_spin_wait_delay: innodb-performance-spin_lock_polling.
                                                             (line    6)
* InnoDB parameters, new, innodb_stats_sample_pages: innodb-other-changes-statistics-estimation.
                                                             (line    6)
* InnoDB parameters, new, innodb_strict_mode: innodb-other-changes-strict-mode.
                                                             (line    6)
* InnoDB parameters, new, innodb_use_sys_malloc: innodb-performance-use_sys_malloc.
                                                             (line    6)
* InnoDB parameters, new, innodb_write_io_threads: innodb-performance-multiple_io_threads.
                                                             (line    6)
* InnoDB parameters, with new defaults:  innodb-parameters-new-defaults.
                                                             (line    6)
* InnoDB parameters, with new defaults, innodb_additional_mem_pool_size: innodb-parameters-new-defaults.
                                                             (line    6)
* InnoDB parameters, with new defaults, innodb_buffer_pool_size: innodb-parameters-new-defaults.
                                                             (line    6)
* InnoDB parameters, with new defaults, innodb_change_buffering: innodb-parameters-new-defaults.
                                                             (line    6)
* InnoDB parameters, with new defaults, innodb_file_format_check: innodb-parameters-new-defaults.
                                                             (line    6)
* InnoDB parameters, with new defaults, innodb_log_buffer_size: innodb-parameters-new-defaults.
                                                             (line    6)
* InnoDB parameters, with new defaults, innodb_max_dirty_pages_pct <1>: innodb-parameters-new-defaults.
                                                             (line    6)
* InnoDB parameters, with new defaults, innodb_max_dirty_pages_pct: innodb-performance-adaptive_flushing.
                                                             (line    6)
* InnoDB parameters, with new defaults, innodb_sync_spin_loops: innodb-parameters-new-defaults.
                                                             (line    6)
* InnoDB parameters, with new defaults, innodb_thread_concurrency: innodb-parameters-new-defaults.
                                                             (line    6)
* InnoDB storage engine <1>:             innodb-storage-engine.
                                                             (line   24)
* InnoDB storage engine:                 storage-engines.    (line   22)
* InnoDB storage engine, compatibility:  innodb-introduction-features.
                                                             (line    6)
* InnoDB storage engine, downloading:    innodb-introduction-obtaining.
                                                             (line    6)
* InnoDB storage engine, features:       innodb-introduction-features.
                                                             (line    6)
* InnoDB storage engine, installing:     innodb-introduction-obtaining.
                                                             (line    6)
* InnoDB storage engine, restrictions:   innodb-introduction-restrictions.
                                                             (line    6)
* InnoDB tables:                         ansi-diff-transactions.
                                                             (line    6)
* InnoDB, adaptive hash index:           innodb-adaptive-hash.
                                                             (line    6)
* InnoDB, and application feature requirements: mysql-cluster-ndb-innodb-usage.
                                                             (line    6)
* InnoDB, applications supported:        mysql-cluster-ndb-innodb-workloads.
                                                             (line    6)
* InnoDB, auto-increment columns:        innodb-auto-increment-handling.
                                                             (line   11)
* InnoDB, autocommit mode <1>:           innodb-implicit-commit.
                                                             (line    6)
* InnoDB, autocommit mode:               innodb-transactions-with-different-apis.
                                                             (line    6)
* InnoDB, availability:                  mysql-cluster-compared.
                                                             (line   36)
* InnoDB, backups:                       innodb-backup.      (line   12)
* InnoDB, buffer pool:                   innodb-buffer-pool. (line    6)
* InnoDB, checkpoints:                   innodb-checkpoints. (line    6)
* InnoDB, clustered index:               innodb-index-types. (line    6)
* InnoDB, compared to MySQL Cluster <1>: mysql-cluster-ndb-innodb-usage.
                                                             (line    6)
* InnoDB, compared to MySQL Cluster <2>: mysql-cluster-ndb-innodb-workloads.
                                                             (line    6)
* InnoDB, compared to MySQL Cluster <3>: mysql-cluster-ndb-innodb-engines.
                                                             (line    6)
* InnoDB, compared to MySQL Cluster:     mysql-cluster-compared.
                                                             (line   12)
* InnoDB, configuration parameters:      innodb-parameters.  (line    6)
* InnoDB, configuring data files and memory allocation: innodb-configuration.
                                                             (line    6)
* InnoDB, considerations as default storage engine: innodb-default-se.
                                                             (line    6)
* InnoDB, consistent reads:              innodb-consistent-read.
                                                             (line    6)
* InnoDB, crash recovery:                innodb-recovery.    (line    6)
* InnoDB, data files:                    innodb-data-log-reconfiguration.
                                                             (line    6)
* InnoDB, deadlock detection:            innodb-deadlock-detection.
                                                             (line    6)
* InnoDB, disk I/O:                      innodb-disk-io.     (line    6)
* InnoDB, file space management:         innodb-file-space.  (line    6)
* InnoDB, file-per-table setting:        innodb-multiple-tablespaces.
                                                             (line   12)
* InnoDB, foreign key constraints:       innodb-foreign-key-constraints.
                                                             (line    6)
* InnoDB, gap lock <1>:                  innodb-next-key-locking.
                                                             (line    6)
* InnoDB, gap lock <2>:                  innodb-record-level-locks.
                                                             (line    6)
* InnoDB, gap lock <3>:                  innodb-transaction-model.
                                                             (line   71)
* InnoDB, gap lock:                      innodb-parameters.  (line 1173)
* InnoDB, index-record lock <1>:         innodb-next-key-locking.
                                                             (line    6)
* InnoDB, index-record lock <2>:         innodb-record-level-locks.
                                                             (line    6)
* InnoDB, index-record lock <3>:         innodb-transaction-model.
                                                             (line   71)
* InnoDB, index-record lock:             innodb-parameters.  (line 1173)
* InnoDB, indexes:                       innodb-table-and-index.
                                                             (line   14)
* InnoDB, insert buffering:              innodb-insert-buffering.
                                                             (line    6)
* InnoDB, limits and restrictions:       innodb-restrictions.
                                                             (line    6)
* InnoDB, lock modes:                    innodb-lock-modes.  (line    6)
* InnoDB, locking:                       innodb-transaction-model.
                                                             (line   18)
* InnoDB, locking reads:                 innodb-locking-reads.
                                                             (line    6)
* InnoDB, log files:                     innodb-data-log-reconfiguration.
                                                             (line    6)
* InnoDB, migrating tables:              innodb-migration.   (line    6)
* InnoDB, Monitors <1>:                  innodb-troubleshooting-datadict.
                                                             (line   58)
* InnoDB, Monitors <2>:                  innodb-troubleshooting.
                                                             (line   30)
* InnoDB, Monitors <3>:                  innodb-monitors.    (line   12)
* InnoDB, Monitors <4>:                  innodb-file-space.  (line   60)
* InnoDB, Monitors:                      innodb-backup.      (line  114)
* InnoDB, multi-versioning:              innodb-multi-versioning.
                                                             (line    6)
* InnoDB, next-key lock <1>:             innodb-next-key-locking.
                                                             (line    6)
* InnoDB, next-key lock <2>:             innodb-record-level-locks.
                                                             (line    6)
* InnoDB, next-key lock <3>:             innodb-transaction-model.
                                                             (line   71)
* InnoDB, next-key lock:                 innodb-parameters.  (line 1173)
* InnoDB, NFS <1>:                       innodb-restrictions.
                                                             (line   16)
* InnoDB, NFS:                           innodb-configuration.
                                                             (line   65)
* InnoDB, page size <1>:                 innodb-restrictions.
                                                             (line   86)
* InnoDB, page size:                     innodb-physical-structure.
                                                             (line    6)
* InnoDB, raw partitions:                innodb-raw-devices. (line    6)
* InnoDB, record-level locks <1>:        innodb-next-key-locking.
                                                             (line    6)
* InnoDB, record-level locks <2>:        innodb-record-level-locks.
                                                             (line    6)
* InnoDB, record-level locks <3>:        innodb-transaction-model.
                                                             (line   71)
* InnoDB, record-level locks:            innodb-parameters.  (line 1173)
* InnoDB, replication:                   innodb-and-mysql-replication.
                                                             (line    6)
* InnoDB, row structure:                 innodb-physical-record.
                                                             (line    6)
* InnoDB, secondary index:               innodb-index-types. (line    6)
* InnoDB, semi-consistent read:          innodb-parameters.  (line 1173)
* InnoDB, Solaris 10 x86_64 issues:      solaris-installation.
                                                             (line   11)
* InnoDB, system tablespace setup:       innodb-init.        (line    6)
* InnoDB, system variables:              innodb-parameters.  (line    6)
* InnoDB, tables <1>:                    innodb-table-and-index.
                                                             (line   14)
* InnoDB, tables:                        using-innodb-tables.
                                                             (line   14)
* InnoDB, tables, converting from other storage engines: converting-tables-to-innodb.
                                                             (line    6)
* InnoDB, transaction model:             innodb-transaction-model.
                                                             (line   18)
* InnoDB, troubleshooting:               innodb-troubleshooting.
                                                             (line    6)
* InnoDB, troubleshooting, data dictionary problems: innodb-troubleshooting-datadict.
                                                             (line    6)
* InnoDB, troubleshooting, deadlocks:    innodb-deadlock-detection.
                                                             (line    6)
* InnoDB, troubleshooting, defragmenting tables: innodb-file-defragmenting.
                                                             (line    6)
* InnoDB, troubleshooting, fast index creation: innodb-create-index-limitations.
                                                             (line    6)
* InnoDB, troubleshooting, I/O problems: error-creating-innodb.
                                                             (line    6)
* InnoDB, troubleshooting, InnoDB error codes: innodb-error-codes.
                                                             (line    6)
* InnoDB, troubleshooting, OS error codes: operating-system-error-codes.
                                                             (line    6)
* InnoDB, troubleshooting, performance problems: optimizing-innodb.
                                                             (line   18)
* InnoDB, troubleshooting, recovery problems: forcing-innodb-recovery.
                                                             (line    6)
* InnoDB, troubleshooting, SQL errors:   innodb-error-handling.
                                                             (line   11)
* innodb-status-file option, mysqld:     innodb-parameters.  (line  183)
* innodb_ system variable, innodb_rollback_segments: innodb-parameters.
                                                             (line 1809)
* innodb_adaptive_flushing:              innodb-performance-adaptive_flushing.
                                                             (line    6)
* innodb_adaptive_flushing system variable: innodb-parameters.
                                                             (line  230)
* innodb_adaptive_hash_index:            innodb-performance-adaptive_hash_index.
                                                             (line    6)
* innodb_adaptive_hash_index system variable: innodb-parameters.
                                                             (line  251)
* innodb_adaptive_hash_index, and innodb_thread_concurrency: innodb-performance-thread_concurrency.
                                                             (line    6)
* innodb_adaptive_hash_index, dynamically changing: innodb-other-changes-innodb_adaptive_hash_index.
                                                             (line    6)
* innodb_additional_mem_pool_size system variable: innodb-parameters.
                                                             (line  275)
* innodb_additional_mem_pool_size, and innodb_use_sys_malloc: innodb-performance-use_sys_malloc.
                                                             (line    6)
* innodb_autoextend_increment system variable: innodb-parameters.
                                                             (line  304)
* innodb_autoinc_lock_mode:              glossary.           (line 1530)
* innodb_autoinc_lock_mode system variable: innodb-parameters.
                                                             (line  331)
* INNODB_BUFFER_PAGE table:              innodb-buffer-page-table.
                                                             (line    6)
* INNODB_BUFFER_PAGE_LRU table:          innodb-buffer-page-lru-table.
                                                             (line    6)
* innodb_buffer_pool_instances system variable: innodb-parameters.
                                                             (line  358)
* innodb_buffer_pool_size system variable: innodb-parameters.
                                                             (line  395)
* INNODB_BUFFER_POOL_STATS table:        innodb-buffer-pool-stats-table.
                                                             (line    6)
* innodb_change_buffering:               innodb-performance-change_buffering.
                                                             (line    6)
* innodb_change_buffering system variable: innodb-parameters.
                                                             (line  444)
* innodb_checksums system variable:      innodb-parameters.  (line  489)
* INNODB_CMP, INFORMATION_SCHEMA table:  innodb-cmp-table.   (line    6)
* INNODB_CMP_RESET, INFORMATION_SCHEMA table: innodb-cmp-table.
                                                             (line    6)
* INNODB_CMPMEM, INFORMATION_SCHEMA table: innodb-cmpmem-table.
                                                             (line    6)
* INNODB_CMPMEM_RESET, INFORMATION_SCHEMA table: innodb-cmpmem-table.
                                                             (line    6)
* innodb_commit_concurrency system variable: innodb-parameters.
                                                             (line  512)
* innodb_concurrency_tickets:            innodb-performance-thread_concurrency.
                                                             (line    6)
* innodb_concurrency_tickets system variable: innodb-parameters.
                                                             (line  538)
* innodb_data_file_path system variable: innodb-parameters.  (line  567)
* innodb_data_home_dir system variable:  innodb-parameters.  (line  598)
* innodb_doublewrite system variable:    innodb-parameters.  (line  621)
* innodb_fast_shutdown system variable:  innodb-parameters.  (line  643)
* innodb_file_format <1>:                glossary.           (line 1545)
* innodb_file_format:                    innodb-file-format. (line   14)
* innodb_file_format system variable:    innodb-parameters.  (line  680)
* innodb_file_format, Antelope:          innodb-compression-internals.
                                                             (line  110)
* innodb_file_format, Barracuda:         innodb-compression-usage.
                                                             (line   11)
* innodb_file_format, downgrading:       innodb-downgrading-overview.
                                                             (line    6)
* innodb_file_format, enabling new file formats: innodb-other-changes-file-formats.
                                                             (line    6)
* innodb_file_format, identifying:       innodb-file-format-identifying.
                                                             (line    6)
* innodb_file_format_check:              innodb-file-format-compatibility-checking.
                                                             (line    6)
* innodb_file_format_check system variable: innodb-parameters.
                                                             (line  715)
* innodb_file_format_max system variable: innodb-parameters. (line  765)
* innodb_file_io_threads:                innodb-performance-multiple_io_threads.
                                                             (line    6)
* innodb_file_per_table <1>:             glossary.           (line 1551)
* innodb_file_per_table:                 innodb-compression-usage.
                                                             (line   11)
* innodb_file_per_table system variable: innodb-parameters.  (line  792)
* innodb_file_per_table, dynamically changing: innodb-other-changes-innodb_file_per_table.
                                                             (line    6)
* innodb_flush_log_at_trx_commit system variable: innodb-parameters.
                                                             (line  825)
* innodb_flush_method system variable:   innodb-parameters.  (line  884)
* innodb_force_load_corrupted system variable: innodb-parameters.
                                                             (line  950)
* innodb_force_recovery system variable: innodb-parameters.  (line  972)
* innodb_io_capacity:                    innodb-performance-thread_io_rate.
                                                             (line    6)
* innodb_io_capacity system variable:    innodb-parameters.  (line 1008)
* innodb_large_prefix system variable:   innodb-parameters.  (line 1078)
* innodb_lock_wait_timeout:              glossary.           (line 1574)
* innodb_lock_wait_timeout system variable: innodb-parameters.
                                                             (line 1110)
* innodb_lock_wait_timeout, dynamically changing: innodb-other-changes-innodb_lock_wait_timeout.
                                                             (line    6)
* INNODB_LOCK_WAITS, INFORMATION_SCHEMA table: innodb-lock-waits-table.
                                                             (line    6)
* INNODB_LOCKS, INFORMATION_SCHEMA table: innodb-locks-table.
                                                             (line    6)
* innodb_locks_unsafe_for_binlog system variable: innodb-parameters.
                                                             (line 1157)
* innodb_log_buffer_size system variable: innodb-parameters. (line 1326)
* innodb_log_file_size system variable:  innodb-parameters.  (line 1351)
* innodb_log_files_in_group system variable: innodb-parameters.
                                                             (line 1381)
* innodb_log_group_home_dir system variable: innodb-parameters.
                                                             (line 1403)
* innodb_max_dirty_pages_pct:            innodb-performance-adaptive_flushing.
                                                             (line    6)
* innodb_max_dirty_pages_pct system variable: innodb-parameters.
                                                             (line 1425)
* innodb_max_purge_lag system variable:  innodb-parameters.  (line 1448)
* innodb_mirrored_log_groups system variable: innodb-parameters.
                                                             (line 1497)
* innodb_old_blocks_pct:                 innodb-performance-midpoint_insertion.
                                                             (line    6)
* innodb_old_blocks_pct system variable: innodb-parameters.  (line 1501)
* innodb_old_blocks_time:                innodb-performance-midpoint_insertion.
                                                             (line    6)
* innodb_old_blocks_time system variable: innodb-parameters. (line 1525)
* innodb_open_files system variable:     innodb-parameters.  (line 1565)
* innodb_print_all_deadlocks system variable: innodb-parameters.
                                                             (line 1593)
* innodb_print_all_deadlocks system variable, innodb_print_all_deadlocks: innodb-parameters.
                                                             (line 1593)
* innodb_purge_batch_size system variable: innodb-parameters.
                                                             (line 1625)
* innodb_purge_threads system variable:  innodb-parameters.  (line 1653)
* innodb_random_read_ahead system variable: innodb-parameters.
                                                             (line 1684)
* innodb_read_ahead_threshold:           innodb-performance-read_ahead.
                                                             (line    6)
* innodb_read_ahead_threshold system variable: innodb-parameters.
                                                             (line 1709)
* innodb_read_io_threads:                innodb-performance-multiple_io_threads.
                                                             (line    6)
* innodb_read_io_threads system variable: innodb-parameters. (line 1736)
* innodb_replication_delay system variable: innodb-parameters.
                                                             (line 1766)
* innodb_rollback_on_timeout system variable: innodb-parameters.
                                                             (line 1787)
* innodb_rollback_segments system variable: innodb-parameters.
                                                             (line 1809)
* innodb_spin_wait_delay:                innodb-performance-spin_lock_polling.
                                                             (line    6)
* innodb_spin_wait_delay system variable: innodb-parameters. (line 1833)
* innodb_stats_method system variable:   innodb-parameters.  (line 1856)
* innodb_stats_on_metadata system variable: innodb-parameters.
                                                             (line 1890)
* innodb_stats_on_metadata, dynamically changing: innodb-other-changes-innodb_stats_on_metadata.
                                                             (line    6)
* innodb_stats_sample_pages:             innodb-other-changes-statistics-estimation.
                                                             (line    6)
* innodb_stats_sample_pages system variable: innodb-parameters.
                                                             (line 1920)
* innodb_strict_mode <1>:                glossary.           (line 1583)
* innodb_strict_mode:                    innodb-other-changes-strict-mode.
                                                             (line    6)
* innodb_strict_mode system variable:    innodb-parameters.  (line 1943)
* innodb_support_xa system variable:     innodb-parameters.  (line 1965)
* innodb_sync_spin_loops system variable: innodb-parameters. (line 2004)
* innodb_table_locks system variable:    innodb-parameters.  (line 2025)
* innodb_thread_concurrency:             innodb-performance-thread_concurrency.
                                                             (line    6)
* innodb_thread_concurrency system variable: innodb-parameters.
                                                             (line 2056)
* innodb_thread_sleep_delay:             innodb-performance-thread_concurrency.
                                                             (line    6)
* innodb_thread_sleep_delay system variable: innodb-parameters.
                                                             (line 2093)
* INNODB_TRX, INFORMATION_SCHEMA table:  innodb-trx-table.   (line    6)
* innodb_use_native_aio system variable: innodb-parameters.  (line 2113)
* innodb_use_sys_malloc:                 innodb-performance-use_sys_malloc.
                                                             (line    6)
* innodb_use_sys_malloc system variable: innodb-parameters.  (line 2146)
* innodb_use_sys_malloc, and innodb_thread_concurrency: innodb-performance-thread_concurrency.
                                                             (line    6)
* innodb_version system variable:        innodb-parameters.  (line 2165)
* innodb_write_io_threads:               innodb-performance-multiple_io_threads.
                                                             (line    6)
* innodb_write_io_threads system variable: innodb-parameters.
                                                             (line 2171)
* insert:                                glossary.           (line 1589)
* INSERT <1>:                            insert.             (line   12)
* INSERT:                                insert-speed.       (line    6)
* INSERT ... SELECT:                     insert-select.      (line    6)
* insert buffer:                         glossary.           (line 1597)
* insert buffering <1>:                  glossary.           (line 1601)
* insert buffering:                      innodb-insert-buffering.
                                                             (line    6)
* insert buffering, disabling:           innodb-performance-change_buffering.
                                                             (line    6)
* INSERT DELAYED:                        insert-delayed.     (line    6)
* INSERT statement, grant privileges:    adding-users.       (line  117)
* INSERT():                              string-functions.   (line  338)
* insert, thread state:                  delayed-insert-thread-states.
                                                             (line   72)
* insert-ignore option, mysqldump:       mysqldump.          (line  716)
* insert_id session variable:            server-system-variables.
                                                             (line 2228)
* insertable views, insertable:          view-updatability.  (line    6)
* inserting, speed of:                   insert-speed.       (line    6)
* inserts, concurrent <1>:               concurrent-inserts. (line    6)
* inserts, concurrent:                   internal-locking.   (line   81)
* install option (ndb_mgmd):             mysql-cluster-programs-ndb-mgmd.
                                                             (line  577)
* install option (ndbd):                 mysql-cluster-programs-ndbd.
                                                             (line  315)
* install option (ndbmtd):               mysql-cluster-programs-ndbd.
                                                             (line  315)
* install option, mysqld:                server-options.     (line  836)
* INSTALL PLUGIN:                        install-plugin.     (line    6)
* install-manual option, mysqld:         server-options.     (line  853)
* INSTALL_BINDIR option, CMake:          source-configuration-options.
                                                             (line  231)
* INSTALL_DOCDIR option, CMake:          source-configuration-options.
                                                             (line  235)
* INSTALL_DOCREADMEDIR option, CMake:    source-configuration-options.
                                                             (line  239)
* INSTALL_INCLUDEDIR option, CMake:      source-configuration-options.
                                                             (line  243)
* INSTALL_INFODIR option, CMake:         source-configuration-options.
                                                             (line  247)
* INSTALL_LAYOUT option, CMake:          source-configuration-options.
                                                             (line  251)
* INSTALL_LIBDIR option, CMake:          source-configuration-options.
                                                             (line  269)
* INSTALL_MANDIR option, CMake:          source-configuration-options.
                                                             (line  273)
* INSTALL_MYSQLSHAREDIR option, CMake:   source-configuration-options.
                                                             (line  277)
* INSTALL_MYSQLTESTDIR option, CMake:    source-configuration-options.
                                                             (line  281)
* INSTALL_PLUGINDIR option, CMake:       source-configuration-options.
                                                             (line  287)
* INSTALL_SBINDIR option, CMake:         source-configuration-options.
                                                             (line  294)
* INSTALL_SCRIPTDIR option, CMake:       source-configuration-options.
                                                             (line  298)
* INSTALL_SHAREDIR option, CMake:        source-configuration-options.
                                                             (line  302)
* INSTALL_SQLBENCHDIR option, CMake:     source-configuration-options.
                                                             (line  306)
* INSTALL_SUPPORTFILESDIR option, CMake: source-configuration-options.
                                                             (line  312)
* Installation:                          MySQLInstallerConsole.
                                                             (line    6)
* installation layouts:                  installation-layouts.
                                                             (line    6)
* installation overview:                 source-installation.
                                                             (line   15)
* installing MySQL Cluster:              mysql-cluster-installation.
                                                             (line   16)
* installing MySQL Cluster, Linux:       mysql-cluster-install-linux.
                                                             (line   12)
* installing MySQL Cluster, Linux binary release: mysql-cluster-install-linux-binary.
                                                             (line    6)
* installing MySQL Cluster, Linux RPM:   mysql-cluster-install-linux-rpm.
                                                             (line    6)
* installing MySQL Cluster, Linux source release: mysql-cluster-install-linux-source.
                                                             (line    6)
* installing MySQL Cluster, Windows:     mysql-cluster-install-windows.
                                                             (line   13)
* installing MySQL Cluster, Windows binary release: mysql-cluster-install-windows-binary.
                                                             (line    6)
* installing MySQL Cluster, Windows source: mysql-cluster-install-windows-source.
                                                             (line    6)
* installing plugins <1>:                install-plugin.     (line    6)
* installing plugins:                    server-plugin-loading.
                                                             (line    6)
* installing, binary distribution:       binary-installation.
                                                             (line    6)
* installing, installing on HP-UX:       hpux-installation.  (line   11)
* installing, Linux RPM packages:        linux-installation-rpm.
                                                             (line    6)
* installing, Mac OS X DMG packages:     macosx-installation.
                                                             (line   14)
* installing, overview:                  installing.         (line   23)
* installing, Perl:                      perl-support.       (line   12)
* installing, Perl on Windows:           activestate-perl.   (line    6)
* installing, Solaris PKG packages:      solaris-installation.
                                                             (line   11)
* installing, source distribution:       source-installation.
                                                             (line   15)
* installing, user-defined functions:    udf-compiling.      (line    6)
* instance:                              glossary.           (line 1612)
* INSTR():                               string-functions.   (line  356)
* instrumentation:                       glossary.           (line 1620)
* INT data type:                         numeric-type-overview.
                                                             (line  116)
* integer arithmetic:                    precision-math.     (line   14)
* INTEGER data type:                     numeric-type-overview.
                                                             (line  121)
* integers:                              number-literals.    (line    6)
* intention lock:                        glossary.           (line 1625)
* interactive option (ndb_mgmd):         mysql-cluster-programs-ndb-mgmd.
                                                             (line  272)
* interactive_timeout system variable:   server-system-variables.
                                                             (line 2234)
* interceptors <1>:                      connector-net-connection-options.
                                                             (line    6)
* interceptors:                          connector-net-interceptors.
                                                             (line    6)
* InteriorRingN():                       polygon-property-functions.
                                                             (line   35)
* internal locking:                      internal-locking.   (line    6)
* internal memory allocator, disabling:  innodb-performance-use_sys_malloc.
                                                             (line    6)
* internals:                             mysql-internals.    (line   11)
* internationalization:                  globalization.      (line   16)
* Internet Relay Chat:                   irc.                (line    6)
* Intersection():                        spatial-operators.  (line   26)
* Intersects():                          functions-that-test-spatial-relationships-between-geometries.
                                                             (line   49)
* INTERVAL():                            comparison-operators.
                                                             (line  315)
* INTO, SELECT:                          select-into.        (line    6)
* introducer, string literal <1>:        charset-literal.    (line   11)
* introducer, string literal:            string-literals.    (line   33)
* invalid data, constraint:              constraint-invalid-data.
                                                             (line    6)
* invalidating query cache entries, thread state: query-cache-thread-states.
                                                             (line   19)
* inverted index:                        glossary.           (line 1638)
* IOPS:                                  glossary.           (line 1645)
* IP addresses, in account names:        account-names.      (line    6)
* IP addresses, in default accounts:     default-privileges. (line    6)
* IPv6 addresses, for JDBC URLs:         connector-j-reference-configuration-properties.
                                                             (line   37)
* IPv6 addresses, in account names:      account-names.      (line    6)
* IPv6 addresses, in default accounts:   default-privileges. (line    6)
* IPv6 connections:                      default-privileges. (line   38)
* IRC:                                   irc.                (line    6)
* IS boolean_value:                      comparison-operators.
                                                             (line  130)
* IS NOT boolean_value:                  comparison-operators.
                                                             (line  138)
* IS NOT NULL:                           comparison-operators.
                                                             (line  191)
* IS NULL <1>:                           comparison-operators.
                                                             (line  146)
* IS NULL:                               is-null-optimization.
                                                             (line    6)
* IS NULL, and indexes:                  index-btree-hash.   (line   39)
* IS_FREE_LOCK():                        miscellaneous-functions.
                                                             (line  142)
* IS_USED_LOCK():                        miscellaneous-functions.
                                                             (line  153)
* IsClosed() <1>:                        multilinestring-property-functions.
                                                             (line   25)
* IsClosed():                            linestring-property-functions.
                                                             (line   39)
* IsEmpty():                             general-geometry-property-functions.
                                                             (line   75)
* ISNULL():                              comparison-operators.
                                                             (line  298)
* isolation level <1>:                   glossary.           (line 1660)
* isolation level:                       innodb-transaction-model.
                                                             (line   18)
* ISOLATION LEVEL:                       set-transaction.    (line    6)
* IsSimple():                            general-geometry-property-functions.
                                                             (line   82)
* ITERATE:                               iterate.            (line    6)
* iterations option, mysqlslap:          mysqlslap.          (line  337)
* J2EE, connection pooling:              connector-j-usagenotes-j2ee-concepts-connection-pooling.
                                                             (line    6)
* J2EE, load balancing:                  connector-j-usagenotes-j2ee-concepts-managing-load-balanced-connections.
                                                             (line    6)
* Japanese character sets, conversion:   faqs-cjk.           (line    6)
* Japanese, Korean, Chinese character sets, frequently asked questions: faqs-cjk.
                                                             (line    6)
* JBoss application server:              connector-j-usagenotes-jboss.
                                                             (line    6)
* JDBC:                                  connectors-apis.    (line   23)
* JDBC, and MySQL data types:            connector-j-reference-type-conversions.
                                                             (line    6)
* JDBC, background information for Connector/J: connector-j-usagenotes-basic.
                                                             (line   13)
* JDBC, character sets:                  connector-j-reference-charsets.
                                                             (line    6)
* JDBC, CLASSPATH:                       connector-j-installing-classpath.
                                                             (line    6)
* JDBC, code examples:                   connector-j-examples.
                                                             (line    6)
* JDBC, compatibility:                   connector-j-reference-implementation-notes.
                                                             (line    6)
* JDBC, configuration properties:        connector-j-reference-configuration-properties.
                                                             (line   10)
* JDBC, driver for MySQL:                connector-j-overview.
                                                             (line    6)
* JDBC, SQLState codes:                  connector-j-reference-error-sqlstates.
                                                             (line    6)
* JDBC, troubleshooting <1>:             connector-j-usagenotes-known-issues-limitations.
                                                             (line    6)
* JDBC, troubleshooting <2>:             connector-j-usagenotes-troubleshooting.
                                                             (line    6)
* JDBC, troubleshooting:                 connector-j-installing-upgrading-issues.
                                                             (line    6)
* JDBC, versions supported:              connector-j-versions.
                                                             (line   11)
* jdbc:mysql:loadbalance://:             mysql-cluster-basics.
                                                             (line  115)
* join:                                  glossary.           (line 1681)
* JOIN:                                  join.               (line    6)
* join algorithm, Block Nested-Loop:     nested-loop-joins.  (line    6)
* join algorithm, Nested-Loop:           nested-loop-joins.  (line    6)
* join option, myisampack:               myisampack.         (line   78)
* join type, ALL:                        explain-output.     (line  385)
* join type, const:                      explain-output.     (line  240)
* join type, eq_ref:                     explain-output.     (line  257)
* join type, fulltext:                   explain-output.     (line  300)
* join type, index:                      explain-output.     (line  366)
* join type, index_merge:                explain-output.     (line  317)
* join type, index_subquery:             explain-output.     (line  335)
* join type, range:                      explain-output.     (line  343)
* join type, ref:                        explain-output.     (line  278)
* join type, ref_or_null:                explain-output.     (line  304)
* join type, system:                     explain-output.     (line  235)
* join type, unique_subquery:            explain-output.     (line  325)
* join, nested-loop algorithm:           nested-join-optimization.
                                                             (line  167)
* join_buffer_size system variable:      server-system-variables.
                                                             (line 2258)
* keep_files_on_create system variable:  server-system-variables.
                                                             (line 2339)
* keepold option, mysqlhotcopy:          mysqlhotcopy.       (line  127)
* key cache, assigning indexes to:       cache-index.        (line    6)
* Key cache, MyISAM:                     myisam-key-cache.   (line   15)
* key partitioning:                      partitioning-key.   (line    6)
* key partitions, managing:              partitioning-management-hash-key.
                                                             (line    6)
* key partitions, splitting and merging: partitioning-management-hash-key.
                                                             (line    6)
* key space, MyISAM:                     key-space.          (line    6)
* key-value store:                       index-btree-hash.   (line   78)
* KEY_BLOCK_SIZE <1>:                    glossary.           (line 1690)
* KEY_BLOCK_SIZE <2>:                    innodb-compression-tuning.
                                                             (line  161)
* KEY_BLOCK_SIZE:                        innodb-compression-usage.
                                                             (line   11)
* key_buffer_size myisamchk variable:    myisamchk-general-options.
                                                             (line   53)
* key_buffer_size system variable:       server-system-variables.
                                                             (line 2370)
* key_cache_age_threshold system variable: server-system-variables.
                                                             (line 2457)
* key_cache_block_size system variable:  server-system-variables.
                                                             (line 2490)
* key_cache_division_limit system variable: server-system-variables.
                                                             (line 2512)
* KEY_COLUMN_USAGE, INFORMATION_SCHEMA table: key-column-usage-table.
                                                             (line    6)
* keys:                                  column-indexes.     (line    6)
* keys option, mysqlshow:                mysqlshow.          (line  173)
* keys, foreign <1>:                     example-foreign-keys.
                                                             (line    6)
* keys, foreign:                         ansi-diff-foreign-keys.
                                                             (line    6)
* keys, multi-column:                    multiple-column-indexes.
                                                             (line    6)
* keys, searching on two:                searching-on-two-keys.
                                                             (line    6)
* keys-used option, myisamchk:           myisamchk-repair-options.
                                                             (line   45)
* keywords:                              reserved-words.     (line    6)
* KILL:                                  kill.               (line    6)
* Kill, thread command:                  thread-commands.    (line   69)
* Killed, thread state:                  general-thread-states.
                                                             (line  158)
* Killing slave, thread state:           slave-connection-thread-states.
                                                             (line   14)
* known errors:                          bugs.               (line    6)
* known issues, Connector/J:             connector-j-usagenotes-known-issues-limitations.
                                                             (line    6)
* Korean:                                faqs-cjk.           (line    6)
* Korean, Chinese, Japanese character sets, frequently asked questions: faqs-cjk.
                                                             (line    6)
* labels, stored program block:          statement-labels.   (line    6)
* language option, mysqld:               server-options.     (line  871)
* language support, error messages:      error-message-language.
                                                             (line    6)
* language system variable:              server-system-variables.
                                                             (line 2535)
* large page support:                    large-page-support. (line    6)
* large tables, and MySQL Cluster:       create-table.       (line  820)
* large tables, creating in NDB:         create-table.       (line  820)
* large-pages option, mysqld:            server-options.     (line  901)
* large_files_support system variable:   server-system-variables.
                                                             (line 2564)
* large_page_size system variable:       server-system-variables.
                                                             (line 2596)
* large_pages system variable:           server-system-variables.
                                                             (line 2576)
* last row, unique ID:                   getting-unique-id.  (line    6)
* LAST_DAY():                            date-and-time-functions.
                                                             (line  647)
* last_insert_id session variable:       server-system-variables.
                                                             (line 2614)
* LAST_INSERT_ID() <1>:                  insert.             (line  206)
* LAST_INSERT_ID():                      information-functions.
                                                             (line  304)
* LAST_INSERT_ID(), and replication:     replication-features-auto-increment.
                                                             (line    6)
* LAST_INSERT_ID(), and stored routines: stored-routines-last-insert-id.
                                                             (line    6)
* LAST_INSERT_ID(), and triggers:        stored-routines-last-insert-id.
                                                             (line    6)
* LAST_INSERT_ID(), locking considerations: ansi-diff-transactions.
                                                             (line  130)
* latch:                                 glossary.           (line 1697)
* layout of installation:                installation-layouts.
                                                             (line    6)
* lc-messages option, mysqld:            server-options.     (line  932)
* lc-messages-dir option, mysqld:        server-options.     (line  953)
* lc_messages system variable:           server-system-variables.
                                                             (line 2622)
* lc_messages_dir system variable:       server-system-variables.
                                                             (line 2643)
* lc_time_names system variable:         server-system-variables.
                                                             (line 2663)
* LCASE():                               string-functions.   (line  370)
* LD_LIBRARY_PATH environment variable:  perl-support-problems.
                                                             (line   20)
* LD_RUN_PATH environment variable <1>:  perl-support-problems.
                                                             (line   20)
* LD_RUN_PATH environment variable:      environment-variables.
                                                             (line   18)
* ldata option, mysql_install_db:        mysql-install-db.   (line   57)
* LDML syntax:                           ldml-rules.         (line    6)
* LEAST():                               comparison-operators.
                                                             (line  329)
* LEAVE:                                 leave.              (line    6)
* ledir option, mysqld_safe:             mysqld-safe.        (line  141)
* LEFT JOIN <1>:                         join.               (line    6)
* LEFT JOIN:                             left-join-optimization.
                                                             (line    6)
* LEFT OUTER JOIN:                       join.               (line    6)
* LEFT():                                string-functions.   (line  374)
* leftmost prefix of indexes:            multiple-column-indexes.
                                                             (line   83)
* legal names:                           identifiers.        (line   13)
* length option, myisam_ftdump:          myisam-ftdump.      (line   70)
* LENGTH():                              string-functions.   (line  384)
* less than (<):                         comparison-operators.
                                                             (line  109)
* less than or equal (<=):               comparison-operators.
                                                             (line  102)
* LIBMYSQL_ENABLE_CLEARTEXT_PLUGIN environment variable: environment-variables.
                                                             (line   18)
* LIBMYSQL_PLUGINS environment variable: mysql-load-plugin.  (line   36)
* libmysqlclient library:                connectors-apis.    (line   23)
* libmysqlclient.a:                      connector-cpp-apps-linux-netbeans.
                                                             (line    6)
* libmysqlcppconn-static.a:              connector-cpp-apps-linux-netbeans.
                                                             (line    6)
* libmysqlcppconn.so:                    connector-cpp-apps-linux-netbeans.
                                                             (line    6)
* libmysqld:                             libmysqld.          (line   13)
* libmysqld library:                     connectors-apis.    (line   23)
* libmysqld, options:                    libmysqld-options.  (line    6)
* libmysqld-libs option, mysql_config:   mysql-config.       (line   26)
* library, libmysqlclient:               connectors-apis.    (line   23)
* library, libmysqld:                    connectors-apis.    (line   23)
* libs option, mysql_config:             mysql-config.       (line   31)
* libs_r option, mysql_config:           mysql-config.       (line   36)
* license system variable:               server-system-variables.
                                                             (line 2684)
* LIKE:                                  string-comparison-functions.
                                                             (line   20)
* LIKE, and indexes:                     index-btree-hash.   (line   13)
* LIKE, and wildcards:                   index-btree-hash.   (line   13)
* LIMIT <1>:                             select.             (line  285)
* LIMIT <2>:                             information-functions.
                                                             (line  220)
* LIMIT:                                 limit-optimization. (line    6)
* LIMIT, and replication:                replication-features-limit.
                                                             (line    6)
* limitations of MySQL Cluster:          mysql-cluster-limitations.
                                                             (line   20)
* limitations, Connector/J:              connector-j-usagenotes-known-issues-limitations.
                                                             (line    6)
* limitations, MySQL Limitations:        limits.             (line   15)
* limitations, replication:              replication-features.
                                                             (line   45)
* limits, file-size:                     table-size-limit.   (line    6)
* limits, InnoDB:                        innodb-restrictions.
                                                             (line    6)
* limits, MySQL Limits, limits in MySQL: limits.             (line   15)
* line-numbers option, mysql:            mysql-command-options.
                                                             (line  320)
* linear hash partitioning:              partitioning-linear-hash.
                                                             (line    6)
* linear key partitioning:               partitioning-key.   (line  103)
* linefeed (\n) <1>:                     load-data.          (line  411)
* linefeed (\n):                         string-literals.    (line   72)
* LineFromText():                        gis-wkt-functions.  (line   25)
* LineFromWKB():                         gis-wkb-functions.  (line   27)
* lines-terminated-by option, mysqldump <1>: mysqlimport.    (line  217)
* lines-terminated-by option, mysqldump: mysqldump.          (line  721)
* LINESTRING data type:                  mysql-spatial-datatypes.
                                                             (line    6)
* LineString():                          gis-mysql-specific-functions.
                                                             (line   24)
* LineStringFromText():                  gis-wkt-functions.  (line   25)
* LineStringFromWKB():                   gis-wkb-functions.  (line   27)
* linking:                               c-api-building-clients.
                                                             (line    6)
* linking, errors:                       c-api-building-clients.
                                                             (line   83)
* linking, problems:                     c-api-building-clients.
                                                             (line   83)
* links, symbolic:                       symbolic-links.     (line   12)
* LINQ:                                  connector-net-tutorials-entity-framework-databinding-linq-entities.
                                                             (line    6)
* list:                                  glossary.           (line 1706)
* list partitioning <1>:                 partitioning-columns.
                                                             (line   11)
* list partitioning:                     partitioning-list.  (line    6)
* list partitions, adding and dropping:  partitioning-management-range-list.
                                                             (line    6)
* list partitions, managing:             partitioning-management-range-list.
                                                             (line    6)
* literals:                              literals.           (line   16)
* LN():                                  mathematical-functions.
                                                             (line  234)
* load balancing, with Connector/J <1>:  connector-j-usagenotes-j2ee-concepts-managing-load-balanced-connections.
                                                             (line    6)
* load balancing, with Connector/J:      connector-j-reference-replication-connection.
                                                             (line    6)
* LOAD DATA INFILE <1>:                  problems-with-null. (line   51)
* LOAD DATA INFILE <2>:                  connector-net-programming-bulk-loader.
                                                             (line    6)
* LOAD DATA INFILE:                      load-data.          (line    6)
* LOAD DATA, and replication:            replication-features-load-data.
                                                             (line    6)
* load emulation:                        mysqlslap.          (line    6)
* LOAD INDEX INTO CACHE, and partitioning: partitioning-limitations.
                                                             (line  254)
* LOAD XML:                              load-xml.           (line    6)
* LOAD_FILE():                           string-functions.   (line  394)
* loading, tables:                       loading-tables.     (line    6)
* local option, mysqlimport:             mysqlimport.        (line  226)
* local-infile option, mysql:            mysql-command-options.
                                                             (line  325)
* local-load option, mysqlbinlog:        mysqlbinlog.        (line  374)
* local_infile system variable:          server-system-variables.
                                                             (line 2699)
* localhost, special treatment of:       connecting.         (line   75)
* localization:                          globalization.      (line   16)
* LOCALTIME:                             date-and-time-functions.
                                                             (line  662)
* LOCALTIMESTAMP:                        date-and-time-functions.
                                                             (line  666)
* LOCATE():                              string-functions.   (line  414)
* lock:                                  glossary.           (line 1714)
* lock escalation:                       glossary.           (line 1720)
* LOCK IN SHARE MODE:                    select.             (line  351)
* lock mode:                             glossary.           (line 1725)
* Lock Monitor, InnoDB:                  innodb-monitors.    (line   12)
* lock option, ndb_select_all:           mysql-cluster-programs-ndb-select-all.
                                                             (line   74)
* LOCK TABLES:                           lock-tables.        (line   12)
* lock wait timeout:                     innodb-other-changes-innodb_lock_wait_timeout.
                                                             (line    6)
* lock-all-tables option, mysqldump:     mysqldump.          (line  727)
* lock-tables option, mysqldump:         mysqldump.          (line  734)
* lock-tables option, mysqlimport:       mysqlimport.        (line  230)
* lock_wait_timeout system variable:     server-system-variables.
                                                             (line 2716)
* Locked, thread state:                  general-thread-states.
                                                             (line  167)
* locked_in_memory system variable:      server-system-variables.
                                                             (line 2766)
* LockExecuteThreadToCPU:                mysql-cluster-ndbd-definition.
                                                             (line 2763)
* locking <1>:                           glossary.           (line 1744)
* locking:                               system-optimization.
                                                             (line   23)
* locking methods:                       internal-locking.   (line    6)
* locking read:                          glossary.           (line 1753)
* locking, external <1>:                 general-thread-states.
                                                             (line  320)
* locking, external <2>:                 external-locking.   (line    6)
* locking, external <3>:                 myisam-crash-recovery.
                                                             (line    6)
* locking, external <4>:                 server-system-variables.
                                                             (line 5280)
* locking, external:                     server-options.     (line  729)
* locking, information schema <1>:       innodb-information-schema-notes.
                                                             (line   12)
* locking, information schema <2>:       innodb-information-schema-transactions.
                                                             (line   10)
* locking, information schema:           innodb-information-schema.
                                                             (line   12)
* locking, internal:                     internal-locking.   (line    6)
* locking, metadata:                     metadata-locking.   (line    6)
* locking, row-level <1>:                internal-locking.   (line    6)
* locking, row-level:                    ansi-diff-transactions.
                                                             (line  137)
* locking, table-level:                  internal-locking.   (line    6)
* LockMaintThreadsToCPU:                 mysql-cluster-ndbd-definition.
                                                             (line 2789)
* LockPagesInMainMemory:                 mysql-cluster-ndbd-definition.
                                                             (line 1415)
* log:                                   glossary.           (line 1760)
* log buf mutex:                         innodb-improved-log-sys-mutex.
                                                             (line    6)
* log buffer:                            glossary.           (line 1770)
* log file:                              glossary.           (line 1774)
* log files (MySQL Cluster):             mysql-cluster-programs-ndbd.
                                                             (line  409)
* log files (MySQL Cluster), ndbmtd:     mysql-cluster-programs-ndbmtd.
                                                             (line   64)
* log files, maintaining:                log-file-maintenance.
                                                             (line    6)
* log group:                             glossary.           (line 1777)
* log option, mysqld:                    server-options.     (line  973)
* log option, mysqld_multi:              mysqld-multi.       (line   99)
* log sys mutex:                         innodb-improved-log-sys-mutex.
                                                             (line    6)
* log system variable:                   server-system-variables.
                                                             (line 2778)
* LOG():                                 mathematical-functions.
                                                             (line  248)
* log-bin option, mysqld:                replication-options-binary-log.
                                                             (line   49)
* log-bin-index option, mysqld:          replication-options-binary-log.
                                                             (line   88)
* log-bin-trust-function-creators option, mysqld: replication-options-binary-log.
                                                             (line  104)
* log-bin-use-v1-row-events option, mysqld: replication-options-binary-log.
                                                             (line  127)
* log-error option, mysqld:              server-options.     (line 1006)
* log-error option, mysqld_safe:         mysqld-safe.        (line  147)
* log-error option, mysqldump:           mysqldump.          (line  748)
* log-isam option, mysqld:               server-options.     (line 1027)
* log-long-format option, mysqld:        server-options.     (line 1042)
* log-name option (ndb_mgmd):            mysql-cluster-programs-ndb-mgmd.
                                                             (line  334)
* log-output option, mysqld:             server-options.     (line 1061)
* log-queries-not-using-indexes option, mysqld: server-options.
                                                             (line 1097)
* log-short-format option, mysqld <1>:   replication-options-binary-log.
                                                             (line  177)
* log-short-format option, mysqld:       server-options.     (line 1120)
* log-slave-updates option, mysqld:      replication-options-slave.
                                                             (line   76)
* log-slow-admin-statements option, mysqld: server-options.  (line 1135)
* log-slow-queries option, mysqld:       server-options.     (line 1154)
* log-slow-slave-statements option, mysqld: replication-options-slave.
                                                             (line  114)
* log-tc option, mysqld:                 server-options.     (line 1187)
* log-tc-size option, mysqld:            server-options.     (line 1206)
* log-warnings option, mysqld <1>:       replication-options-slave.
                                                             (line  130)
* log-warnings option, mysqld:           server-options.     (line 1229)
* LOG10():                               mathematical-functions.
                                                             (line  288)
* LOG2():                                mathematical-functions.
                                                             (line  275)
* log_bin system variable:               replication-options-binary-log.
                                                             (line  683)
* log_bin_trust_function_creators system variable: server-system-variables.
                                                             (line 2804)
* log_bin_use_v1_row_events system variable: replication-options-binary-log.
                                                             (line  700)
* log_error system variable:             server-system-variables.
                                                             (line 2833)
* log_output system variable:            server-system-variables.
                                                             (line 2852)
* log_queries_not_using_indexes system variable: server-system-variables.
                                                             (line 2881)
* log_slave_updates system variable:     replication-options-binary-log.
                                                             (line  748)
* log_slow_queries system variable:      server-system-variables.
                                                             (line 2900)
* log_warnings system variable:          server-system-variables.
                                                             (line 2925)
* logbuffers, ndbinfo table:             mysql-cluster-ndbinfo-logbuffers.
                                                             (line    6)
* LogDestination:                        mysql-cluster-mgm-definition.
                                                             (line  110)
* logging commands (MySQL Cluster):      mysql-cluster-logging-management-commands.
                                                             (line    6)
* logging slow query, thread state:      general-thread-states.
                                                             (line  175)
* logging, passwords:                    password-logging.   (line    6)
* logical:                               glossary.           (line 1781)
* logical backup:                        glossary.           (line 1787)
* logical operators:                     logical-operators.  (line    6)
* login, thread state:                   general-thread-states.
                                                             (line  184)
* LogLevelCheckpoint:                    mysql-cluster-ndbd-definition.
                                                             (line 2456)
* LogLevelCongestion:                    mysql-cluster-ndbd-definition.
                                                             (line 2512)
* LogLevelConnection:                    mysql-cluster-ndbd-definition.
                                                             (line 2483)
* LogLevelError:                         mysql-cluster-ndbd-definition.
                                                             (line 2497)
* LogLevelInfo:                          mysql-cluster-ndbd-definition.
                                                             (line 2527)
* LogLevelNodeRestart:                   mysql-cluster-ndbd-definition.
                                                             (line 2470)
* LogLevelShutdown:                      mysql-cluster-ndbd-definition.
                                                             (line 2427)
* LogLevelStartup:                       mysql-cluster-ndbd-definition.
                                                             (line 2413)
* LogLevelStatistic:                     mysql-cluster-ndbd-definition.
                                                             (line 2441)
* logs, and TIMESTAMP:                   upgrading-from-previous-series.
                                                             (line  320)
* logs, flushing:                        server-logs.        (line   37)
* logs, server:                          server-logs.        (line   15)
* logspaces, ndbinfo table:              mysql-cluster-ndbinfo-logspaces.
                                                             (line    6)
* LONG data type:                        blob.               (line    6)
* Long Data, thread command:             thread-commands.    (line   73)
* long_query_time system variable:       server-system-variables.
                                                             (line 2961)
* LONGBLOB data type:                    string-type-overview.
                                                             (line  220)
* LongMessageBuffer:                     mysql-cluster-ndbd-definition.
                                                             (line  886)
* LONGTEXT data type:                    string-type-overview.
                                                             (line  230)
* LOOP:                                  loop.               (line    6)
* LOOP, labels:                          statement-labels.   (line    6)
* loops option (ndb_index_stat):         mysql-cluster-programs-ndb-index-stat.
                                                             (line  320)
* loops option (ndbinfo_select_all):     mysql-cluster-programs-ndbinfo-select-all.
                                                             (line  102)
* loops option, ndb_show_tables:         mysql-cluster-programs-ndb-show-tables.
                                                             (line   53)
* loose_:                                glossary.           (line 1796)
* lossy-conversions option (ndb_restore): mysql-cluster-programs-ndb-restore.
                                                             (line  289)
* lost connection errors:                error-lost-connection.
                                                             (line    6)
* low-priority option, mysqlimport:      mysqlimport.        (line  235)
* low-priority-updates option, mysqld:   server-options.     (line 1277)
* low-water mark:                        glossary.           (line 1805)
* low_priority_updates system variable:  server-system-variables.
                                                             (line 2991)
* LOWER():                               string-functions.   (line  431)
* lower_case_file_system system variable: server-system-variables.
                                                             (line 3016)
* lower_case_table_names system variable: server-system-variables.
                                                             (line 3034)
* LPAD():                                string-functions.   (line  455)
* LRU:                                   glossary.           (line 1809)
* LRU page replacement:                  innodb-performance-midpoint_insertion.
                                                             (line    6)
* LSN:                                   glossary.           (line 1825)
* LTRIM():                               string-functions.   (line  466)
* Lua:                                   mysql-proxy.        (line   15)
* Mac OS X:                              connector-odbc.     (line   17)
* Mac OS X, installation:                macosx-installation.
                                                             (line   14)
* mailing lists:                         mailing-lists.      (line   10)
* mailing lists, archive location:       mailing-lists.      (line   10)
* mailing lists, guidelines:             mailing-list-use.   (line    6)
* main features of MySQL:                features.           (line    6)
* maintaining, log files:                log-file-maintenance.
                                                             (line    6)
* maintaining, tables:                   myisam-maintenance-schedule.
                                                             (line    6)
* maintenance, tables:                   mysqlcheck.         (line    6)
* MAKE_SET():                            string-functions.   (line  475)
* MAKEDATE():                            date-and-time-functions.
                                                             (line  670)
* MAKETIME():                            date-and-time-functions.
                                                             (line  682)
* Making temp file, thread state:        slave-sql-thread-states.
                                                             (line   18)
* malicious SQL statements, and MySQL Cluster: mysql-cluster-security-mysql-privileges.
                                                             (line   66)
* manage keys, thread state:             general-thread-states.
                                                             (line  189)
* management client (MySQL Cluster):     mysql-cluster-programs-ndb-mgm.
                                                             (line    6)
* management node (MySQL Cluster), defined: mysql-cluster-basics.
                                                             (line    6)
* management nodes (MySQL Cluster):      mysql-cluster-programs-ndb-mgmd.
                                                             (line    6)
* managing MySQL Cluster:                mysql-cluster-management.
                                                             (line   24)
* managing MySQL Cluster processes:      mysql-cluster-programs.
                                                             (line   34)
* manual, available formats:             manual-info.        (line   33)
* manual, online location:               manual-info.        (line    6)
* manual, syntax conventions:            manual-conventions. (line    8)
* manual, typographical conventions:     manual-conventions. (line    8)
* Master has sent all binlog to slave; waiting for binlog to be updated, thread state: master-thread-states.
                                                             (line   22)
* master server:                         glossary.           (line 1842)
* master thread:                         glossary.           (line 1847)
* master-data option, mysqldump:         mysqldump.          (line  753)
* master-info-file option, mysqld:       replication-options-slave.
                                                             (line  173)
* master-retry-count option, mysqld:     replication-options-slave.
                                                             (line  191)
* MASTER_POS_WAIT() <1>:                 master-pos-wait.    (line    6)
* MASTER_POS_WAIT():                     miscellaneous-functions.
                                                             (line  163)
* MATCH ... AGAINST():                   fulltext-search.    (line   16)
* matching, patterns:                    pattern-matching.   (line    6)
* math:                                  precision-math.     (line   14)
* mathematical functions:                mathematical-functions.
                                                             (line   52)
* MAX():                                 group-by-functions. (line  192)
* MAX(DISTINCT):                         group-by-functions. (line  192)
* max-binlog-dump-events option, mysqld: replication-options-binary-log.
                                                             (line  403)
* max-record-length option, myisamchk:   myisamchk-repair-options.
                                                             (line   61)
* max-relay-log-size option, mysqld:     replication-options-slave.
                                                             (line  255)
* max_allowed_packet system variable:    server-system-variables.
                                                             (line 3080)
* max_allowed_packet variable:           mysql-command-options.
                                                             (line  652)
* max_allowed_packet, and replication:   replication-features-max-allowed-packet.
                                                             (line    6)
* max_binlog_cache_size system variable: replication-options-binary-log.
                                                             (line  769)
* max_binlog_size system variable:       replication-options-binary-log.
                                                             (line  821)
* max_binlog_stmt_cache_size system variable: replication-options-binary-log.
                                                             (line  853)
* max_connect_errors system variable:    server-system-variables.
                                                             (line 3125)
* max_connections system variable:       server-system-variables.
                                                             (line 3162)
* MAX_CONNECTIONS_PER_HOUR:              user-resources.     (line    6)
* max_delayed_threads system variable:   server-system-variables.
                                                             (line 3188)
* max_error_count system variable:       server-system-variables.
                                                             (line 3218)
* max_heap_table_size system variable:   server-system-variables.
                                                             (line 3241)
* max_insert_delayed_threads system variable: server-system-variables.
                                                             (line 3288)
* max_join_size system variable:         server-system-variables.
                                                             (line 3303)
* max_join_size variable:                mysql-command-options.
                                                             (line  657)
* max_length_for_sort_data system variable: server-system-variables.
                                                             (line 3342)
* max_long_data_size system variable:    server-system-variables.
                                                             (line 3364)
* max_prepared_stmt_count system variable: server-system-variables.
                                                             (line 3392)
* MAX_QUERIES_PER_HOUR:                  user-resources.     (line    6)
* max_relay_log_size system variable:    server-system-variables.
                                                             (line 3422)
* MAX_ROWS, and DataMemory (MySQL Cluster): mysql-cluster-ndbd-definition.
                                                             (line  355)
* MAX_ROWS, and MySQL Cluster <1>:       partitioning-overview.
                                                             (line  134)
* MAX_ROWS, and MySQL Cluster:           create-table.       (line  820)
* MAX_ROWS, and NDB:                     create-table.       (line  820)
* max_seeks_for_key system variable:     server-system-variables.
                                                             (line 3451)
* max_sort_length system variable:       server-system-variables.
                                                             (line 3486)
* max_sp_recursion_depth system variable: server-system-variables.
                                                             (line 3509)
* max_tmp_tables system variable:        server-system-variables.
                                                             (line 3537)
* MAX_UPDATES_PER_HOUR:                  user-resources.     (line    6)
* MAX_USER_CONNECTIONS:                  user-resources.     (line    6)
* max_user_connections system variable:  server-system-variables.
                                                             (line 3541)
* max_write_lock_count system variable:  server-system-variables.
                                                             (line 3580)
* MaxAllocate:                           mysql-cluster-ndbd-definition.
                                                             (line  920)
* MaxBufferedEpochBytes:                 mysql-cluster-ndbd-definition.
                                                             (line 2045)
* MaxBufferedEpochs:                     mysql-cluster-ndbd-definition.
                                                             (line 2018)
* MAXDB SQL mode:                        server-sql-mode.    (line  519)
* MaxDMLOperationsPerTransaction:        mysql-cluster-ndbd-definition.
                                                             (line  708)
* maximum memory used:                   mysqladmin.         (line  210)
* maximums, maximum columns per table:   column-count-limit. (line    6)
* maximums, maximum number of databases: database-count-limit.
                                                             (line    6)
* maximums, maximum number of tables:    database-count-limit.
                                                             (line    6)
* maximums, maximum row size:            column-count-limit. (line    6)
* maximums, maximum tables per join:     joins-limits.       (line    6)
* maximums, table size:                  table-size-limit.   (line    6)
* MaxLCPStartDelay:                      mysql-cluster-ndbd-definition.
                                                             (line 1139)
* MaxNoOfAttributes:                     mysql-cluster-ndbd-definition.
                                                             (line 1179)
* MaxNoOfConcurrentIndexOperations:      mysql-cluster-ndbd-definition.
                                                             (line  738)
* MaxNoOfConcurrentOperations:           mysql-cluster-ndbd-definition.
                                                             (line  620)
* MaxNoOfConcurrentScans:                mysql-cluster-ndbd-definition.
                                                             (line  822)
* MaxNoOfConcurrentSubOperations:        mysql-cluster-ndbd-definition.
                                                             (line 1393)
* MaxNoOfConcurrentTransactions:         mysql-cluster-ndbd-definition.
                                                             (line  560)
* MaxNoOfExecutionThreads, ndbmtd:       mysql-cluster-ndbd-definition.
                                                             (line 2932)
* MaxNoOfFiredTriggers:                  mysql-cluster-ndbd-definition.
                                                             (line  762)
* MaxNoOfIndexes:                        mysql-cluster-ndbd-definition.
                                                             (line 1333)
* MaxNoOfLocalOperations:                mysql-cluster-ndbd-definition.
                                                             (line  692)
* MaxNoOfLocalScans:                     mysql-cluster-ndbd-definition.
                                                             (line  853)
* MaxNoOfOpenFiles:                      mysql-cluster-ndbd-definition.
                                                             (line 1094)
* MaxNoOfOrderedIndexes:                 mysql-cluster-ndbd-definition.
                                                             (line 1264)
* MaxNoOfSavedMessages:                  mysql-cluster-ndbd-definition.
                                                             (line 1124)
* MaxNoOfSubscribers:                    mysql-cluster-ndbd-definition.
                                                             (line 1364)
* MaxNoOfSubscriptions:                  mysql-cluster-ndbd-definition.
                                                             (line 1345)
* MaxNoOfTables:                         mysql-cluster-ndbd-definition.
                                                             (line 1228)
* MaxNoOfTriggers:                       mysql-cluster-ndbd-definition.
                                                             (line 1311)
* MaxNoOfUniqueHashIndexes:              mysql-cluster-ndbd-definition.
                                                             (line 1288)
* MaxParallelScansPerFragment:           mysql-cluster-ndbd-definition.
                                                             (line  900)
* MaxScanBatchSize:                      mysql-cluster-api-definition.
                                                             (line  228)
* MaxStartFailRetries:                   mysql-cluster-ndbd-definition.
                                                             (line 3705)
* MBR:                                   relations-on-geometry-mbr.
                                                             (line    6)
* MBRContains():                         relations-on-geometry-mbr.
                                                             (line   10)
* MBRDisjoint():                         relations-on-geometry-mbr.
                                                             (line   25)
* MBREqual():                            relations-on-geometry-mbr.
                                                             (line   30)
* MBRIntersects():                       relations-on-geometry-mbr.
                                                             (line   35)
* MBROverlaps():                         relations-on-geometry-mbr.
                                                             (line   40)
* MBRTouches():                          relations-on-geometry-mbr.
                                                             (line   48)
* MBRWithin():                           relations-on-geometry-mbr.
                                                             (line   56)
* MD5():                                 encryption-functions.
                                                             (line  300)
* MDL:                                   glossary.           (line 1856)
* medium trust:                          connector-net-medium-trust.
                                                             (line   12)
* medium-check option, myisamchk:        myisamchk-check-options.
                                                             (line   49)
* medium-check option, mysqlcheck:       mysqlcheck.         (line  324)
* MEDIUMBLOB data type:                  string-type-overview.
                                                             (line  204)
* MEDIUMINT data type:                   numeric-type-overview.
                                                             (line  111)
* MEDIUMTEXT data type:                  string-type-overview.
                                                             (line  211)
* membership, ndbinfo table:             mysql-cluster-ndbinfo-membership.
                                                             (line    6)
* memcached:                             glossary.           (line 1858)
* MEMCACHED_HOME option, CMake:          source-configuration-options.
                                                             (line  603)
* memlock option, mysqld:                server-options.     (line 1333)
* memory allocator, innodb_use_sys_malloc: innodb-performance-use_sys_malloc.
                                                             (line    6)
* MEMORY storage engine <1>:             memory-storage-engine.
                                                             (line    6)
* MEMORY storage engine:                 storage-engines.    (line   22)
* MEMORY storage engine, and replication: replication-features-memory.
                                                             (line    6)
* memory usage, myisamchk:               myisamchk-memory.   (line    6)
* memory use <1>:                        memory-use.         (line    6)
* memory use:                            mysqladmin.         (line  204)
* memory use, in MySQL Cluster:          mysql-cluster-limitations-limits.
                                                             (line    9)
* memory use, Performance Schema:        performance-schema-startup-configuration.
                                                             (line   47)
* memoryusage, ndbinfo table:            mysql-cluster-ndbinfo-memoryusage.
                                                             (line    6)
* MemReportFrequency:                    mysql-cluster-ndbd-definition.
                                                             (line 2541)
* merge:                                 glossary.           (line 1879)
* MERGE storage engine <1>:              merge-storage-engine.
                                                             (line   11)
* MERGE storage engine:                  storage-engines.    (line   22)
* MERGE tables, defined:                 merge-storage-engine.
                                                             (line   11)
* metadata lock:                         glossary.           (line 1885)
* metadata locking, transactions:        metadata-locking.   (line    6)
* metadata, database:                    information-schema. (line   40)
* metadata, stored routines:             stored-routines-metadata.
                                                             (line    6)
* metadata, triggers:                    trigger-metadata.   (line    6)
* metadata, views:                       view-metadata.      (line    6)
* metadata_locks_cache_size system variable: server-system-variables.
                                                             (line 3609)
* method option, mysqlhotcopy:           mysqlhotcopy.       (line  131)
* methods, locking:                      internal-locking.   (line    6)
* metrics counter:                       glossary.           (line 1896)
* mgmd (MySQL Cluster), defined:         mysql-cluster-basics.
                                                             (line    6)
* MICROSECOND():                         date-and-time-functions.
                                                             (line  690)
* Microsoft Access:                      connector-odbc-usagenotes-apptips-microsoft-access.
                                                             (line    6)
* Microsoft ADO <1>:                     connector-net-visual-studio-entity-framework.
                                                             (line    6)
* Microsoft ADO:                         connector-odbc-usagenotes-apptips-microsoft-ado.
                                                             (line    6)
* Microsoft Excel:                       connector-odbc-usagenotes-apptips-microsoft-excel.
                                                             (line    6)
* Microsoft Visual Basic:                connector-odbc-usagenotes-apptips-microsoft-visualbasic.
                                                             (line    6)
* Microsoft Visual InterDev:             connector-odbc-usagenotes-apptips-microsoft-visualinterdev.
                                                             (line    6)
* Microsoft Visual Studio:               connector-net-visual-studio.
                                                             (line   23)
* MID():                                 string-functions.   (line  492)
* midpoint insertion:                    innodb-performance-midpoint_insertion.
                                                             (line    6)
* midpoint insertion strategy:           glossary.           (line 1903)
* MIN():                                 group-by-functions. (line  212)
* MIN(DISTINCT):                         group-by-functions. (line  212)
* min-examined-row-limit option, mysqld: server-options.     (line 1303)
* min_examined_row_limit system variable: server-system-variables.
                                                             (line 3631)
* MinFreePct:                            mysql-cluster-ndbd-definition.
                                                             (line  355)
* mini-transaction:                      glossary.           (line 1911)
* Minimum Bounding Rectangle:            relations-on-geometry-mbr.
                                                             (line    6)
* minus, unary (-):                      arithmetic-functions.
                                                             (line   69)
* MINUTE():                              date-and-time-functions.
                                                             (line  700)
* mirror sites:                          getting-mysql.      (line    6)
* miscellaneous functions:               miscellaneous-functions.
                                                             (line    6)
* mixed statements (Replication):        replication-features-transactions.
                                                             (line   38)
* mixed-mode insert:                     glossary.           (line 1920)
* MLineFromText():                       gis-wkt-functions.  (line   30)
* MLineFromWKB():                        gis-wkb-functions.  (line   32)
* MOD (modulo):                          mathematical-functions.
                                                             (line  301)
* MOD():                                 mathematical-functions.
                                                             (line  301)
* modes, batch:                          batch-mode.         (line    6)
* modulo (%):                            mathematical-functions.
                                                             (line  301)
* modulo (MOD):                          mathematical-functions.
                                                             (line  301)
* monitor, terminal:                     tutorial.           (line   16)
* monitoring:                            mysql-enterprise-monitor.
                                                             (line    6)
* monitoring, threads:                   thread-information. (line   19)
* Monitors, InnoDB <1>:                  innodb-troubleshooting-datadict.
                                                             (line   58)
* Monitors, InnoDB <2>:                  innodb-troubleshooting.
                                                             (line   30)
* Monitors, InnoDB <3>:                  innodb-monitors.    (line   12)
* Monitors, InnoDB <4>:                  innodb-file-space.  (line   60)
* Monitors, InnoDB:                      innodb-backup.      (line  114)
* Mono:                                  connector-net.      (line   20)
* MONTH():                               date-and-time-functions.
                                                             (line  707)
* MONTHNAME():                           date-and-time-functions.
                                                             (line  716)
* MPointFromText():                      gis-wkt-functions.  (line   35)
* MPointFromWKB():                       gis-wkb-functions.  (line   37)
* MPolyFromText():                       gis-wkt-functions.  (line   40)
* MPolyFromWKB():                        gis-wkb-functions.  (line   42)
* mSQL compatibility:                    regexp.             (line   32)
* msql2mysql:                            msql2mysql.         (line    6)
* MSSQL SQL mode:                        server-sql-mode.    (line  525)
* multi mysqld:                          mysqld-multi.       (line    6)
* multi-byte character sets:             cannot-initialize-character-set.
                                                             (line    6)
* multi-byte characters:                 multi-byte-characters.
                                                             (line    6)
* multi-column indexes:                  multiple-column-indexes.
                                                             (line    6)
* multi-core:                            glossary.           (line 1939)
* multi-master replication, in MySQL Cluster <1>: mysql-cluster-replication-conflict-resolution.
                                                             (line    6)
* multi-master replication, in MySQL Cluster: mysql-cluster-replication-multi-master.
                                                             (line    6)
* MULTILINESTRING data type:             mysql-spatial-datatypes.
                                                             (line    6)
* MultiLineString():                     gis-mysql-specific-functions.
                                                             (line   30)
* MultiLineStringFromText():             gis-wkt-functions.  (line   30)
* MultiLineStringFromWKB():              gis-wkb-functions.  (line   32)
* multiple buffer pools:                 innodb-multiple-buffer-pools.
                                                             (line    6)
* multiple rollback segments:            innodb-multiple-rollback-segments.
                                                             (line    6)
* multiple servers:                      multiple-servers.   (line   13)
* multiple-part index:                   create-index.       (line    6)
* multiplication (*):                    arithmetic-functions.
                                                             (line   83)
* MULTIPOINT data type:                  mysql-spatial-datatypes.
                                                             (line    6)
* MultiPoint():                          gis-mysql-specific-functions.
                                                             (line   35)
* MultiPointFromText():                  gis-wkt-functions.  (line   35)
* MultiPointFromWKB():                   gis-wkb-functions.  (line   37)
* MULTIPOLYGON data type:                mysql-spatial-datatypes.
                                                             (line    6)
* MultiPolygon():                        gis-mysql-specific-functions.
                                                             (line   40)
* MultiPolygonFromText():                gis-wkt-functions.  (line   40)
* MultiPolygonFromWKB():                 gis-wkb-functions.  (line   42)
* mutex:                                 glossary.           (line 1942)
* mutex_instances table, performance_schema: mutex-instances-table.
                                                             (line    6)
* MVCC:                                  glossary.           (line 1950)
* MVCC (multi-version concurrency control): innodb-multi-versioning.
                                                             (line    6)
* My, derivation:                        history.            (line    6)
* my-print-defaults option, mysql_plugin: mysql-plugin.      (line  106)
* my.cnf:                                glossary.           (line 1962)
* my.cnf file:                           replication-features.
                                                             (line   45)
* my.cnf, and MySQL Cluster <1>:         mysql-cluster-config-example.
                                                             (line    6)
* my.cnf, and MySQL Cluster <2>:         mysql-cluster-config-file.
                                                             (line   21)
* my.cnf, and MySQL Cluster:             mysql-cluster-install-configuration.
                                                             (line    6)
* my.cnf, in MySQL Cluster:              mysql-cluster-mysqld.
                                                             (line   52)
* my.ini:                                glossary.           (line 1964)
* my_bool C type:                        c-api-data-structures.
                                                             (line   64)
* my_bool values, printing:              c-api-data-structures.
                                                             (line   64)
* my_init():                             my-init.            (line    6)
* my_print_defaults <1>:                 my-print-defaults.  (line    6)
* my_print_defaults:                     programs-overview.  (line  239)
* my_print_defaults, config-file option: my-print-defaults.  (line   29)
* my_print_defaults, debug option:       my-print-defaults.  (line   35)
* my_print_defaults, defaults-extra-file option: my-print-defaults.
                                                             (line   41)
* my_print_defaults, defaults-file option: my-print-defaults.
                                                             (line   31)
* my_print_defaults, defaults-group-suffix option: my-print-defaults.
                                                             (line   48)
* my_print_defaults, extra-file option:  my-print-defaults.  (line   43)
* my_print_defaults, help option:        my-print-defaults.  (line   25)
* my_print_defaults, no-defaults option: my-print-defaults.  (line   53)
* my_print_defaults, verbose option:     my-print-defaults.  (line   57)
* my_print_defaults, version option:     my-print-defaults.  (line   61)
* my_ulonglong C type:                   c-api-data-structures.
                                                             (line   50)
* my_ulonglong values, printing:         c-api-data-structures.
                                                             (line   50)
* mycnf option, ndb_config:              mysql-cluster-programs-ndb-config.
                                                             (line  170)
* mycnf option, ndb_mgmd:                mysql-cluster-programs-ndb-mgmd.
                                                             (line  241)
* MyISAM key cache:                      myisam-key-cache.   (line   15)
* MyISAM storage engine <1>:             myisam-storage-engine.
                                                             (line   13)
* MyISAM storage engine:                 storage-engines.    (line   22)
* MyISAM, compressed tables <1>:         compressed-format.  (line    6)
* MyISAM, compressed tables:             myisampack.         (line    6)
* MyISAM, converting tables to InnoDB:   converting-tables-to-innodb.
                                                             (line    6)
* myisam-block-size option, mysqld:      server-options.     (line 1382)
* myisam-recover option, mysqld:         server-options.     (line 1399)
* myisam-recover-options option, mysqld <1>: myisam-start.   (line   41)
* myisam-recover-options option, mysqld: server-options.     (line 1405)
* myisam_block_size myisamchk variable:  myisamchk-general-options.
                                                             (line   53)
* myisam_data_pointer_size system variable: server-system-variables.
                                                             (line 3661)
* myisam_ftdump <1>:                     myisam-ftdump.      (line    6)
* myisam_ftdump:                         programs-overview.  (line  152)
* myisam_ftdump, count option:           myisam-ftdump.      (line   62)
* myisam_ftdump, dump option:            myisam-ftdump.      (line   66)
* myisam_ftdump, help option:            myisam-ftdump.      (line   58)
* myisam_ftdump, length option:          myisam-ftdump.      (line   70)
* myisam_ftdump, stats option:           myisam-ftdump.      (line   74)
* myisam_ftdump, verbose option:         myisam-ftdump.      (line   79)
* myisam_max_sort_file_size system variable: server-system-variables.
                                                             (line 3684)
* myisam_mmap_size system variable:      server-system-variables.
                                                             (line 3718)
* myisam_recover_options system variable: server-system-variables.
                                                             (line 3751)
* myisam_repair_threads system variable: server-system-variables.
                                                             (line 3763)
* myisam_sort_buffer_size myisamchk variable: myisamchk-general-options.
                                                             (line   53)
* myisam_sort_buffer_size system variable: server-system-variables.
                                                             (line 3798)
* myisam_stats_method system variable:   server-system-variables.
                                                             (line 3837)
* myisam_use_mmap system variable:       server-system-variables.
                                                             (line 3870)
* myisamchk <1>:                         myisamchk.          (line   15)
* myisamchk:                             programs-overview.  (line  157)
* myisamchk, analyze option:             myisamchk-other-options.
                                                             (line    9)
* myisamchk, backup option:              myisamchk-repair-options.
                                                             (line   10)
* myisamchk, block-search option:        myisamchk-other-options.
                                                             (line   18)
* myisamchk, character-sets-dir option:  myisamchk-repair-options.
                                                             (line   14)
* myisamchk, check option:               myisamchk-check-options.
                                                             (line    9)
* myisamchk, check-only-changed option:  myisamchk-check-options.
                                                             (line   14)
* myisamchk, correct-checksum option:    myisamchk-repair-options.
                                                             (line   19)
* myisamchk, data-file-length option:    myisamchk-repair-options.
                                                             (line   23)
* myisamchk, debug option:               myisamchk-general-options.
                                                             (line   21)
* myisamchk, description option:         myisamchk-other-options.
                                                             (line   22)
* myisamchk, example output:             myisamchk-table-info.
                                                             (line    6)
* myisamchk, extend-check option <1>:    myisamchk-repair-options.
                                                             (line   28)
* myisamchk, extend-check option:        myisamchk-check-options.
                                                             (line   18)
* myisamchk, fast option:                myisamchk-check-options.
                                                             (line   35)
* myisamchk, force option <1>:           myisamchk-repair-options.
                                                             (line   40)
* myisamchk, force option:               myisamchk-check-options.
                                                             (line   39)
* myisamchk, HELP option:                myisamchk-general-options.
                                                             (line   16)
* myisamchk, help option:                myisamchk-general-options.
                                                             (line   11)
* myisamchk, information option:         myisamchk-check-options.
                                                             (line   45)
* myisamchk, keys-used option:           myisamchk-repair-options.
                                                             (line   45)
* myisamchk, max-record-length option:   myisamchk-repair-options.
                                                             (line   61)
* myisamchk, medium-check option:        myisamchk-check-options.
                                                             (line   49)
* myisamchk, no-symlinks option:         myisamchk-repair-options.
                                                             (line   54)
* myisamchk, options:                    myisamchk-general-options.
                                                             (line    6)
* myisamchk, parallel-recover option:    myisamchk-repair-options.
                                                             (line   66)
* myisamchk, quick option:               myisamchk-repair-options.
                                                             (line   72)
* myisamchk, read-only option:           myisamchk-check-options.
                                                             (line   55)
* myisamchk, recover option:             myisamchk-repair-options.
                                                             (line   79)
* myisamchk, safe-recover option:        myisamchk-repair-options.
                                                             (line   92)
* myisamchk, set-auto-increment[ option: myisamchk-other-options.
                                                             (line   28)
* myisamchk, set-character-set option:   myisamchk-repair-options.
                                                             (line  105)
* myisamchk, set-collation option:       myisamchk-repair-options.
                                                             (line  110)
* myisamchk, silent option:              myisamchk-general-options.
                                                             (line   27)
* myisamchk, sort-index option:          myisamchk-other-options.
                                                             (line   36)
* myisamchk, sort-records option:        myisamchk-other-options.
                                                             (line   41)
* myisamchk, sort-recover option:        myisamchk-repair-options.
                                                             (line  116)
* myisamchk, tmpdir option:              myisamchk-repair-options.
                                                             (line  121)
* myisamchk, unpack option:              myisamchk-repair-options.
                                                             (line  131)
* myisamchk, update-state option:        myisamchk-check-options.
                                                             (line   62)
* myisamchk, verbose option:             myisamchk-general-options.
                                                             (line   32)
* myisamchk, version option:             myisamchk-general-options.
                                                             (line   38)
* myisamchk, wait option:                myisamchk-general-options.
                                                             (line   42)
* myisamlog <1>:                         myisamlog.          (line    6)
* myisamlog:                             programs-overview.  (line  162)
* myisampack <1>:                        compressed-format.  (line    6)
* myisampack <2>:                        silent-column-changes.
                                                             (line   70)
* myisampack <3>:                        myisampack.         (line    6)
* myisampack:                            programs-overview.  (line  167)
* myisampack, backup option:             myisampack.         (line   51)
* myisampack, character-sets-dir option: myisampack.         (line   56)
* myisampack, debug option:              myisampack.         (line   61)
* myisampack, force option:              myisampack.         (line   66)
* myisampack, help option:               myisampack.         (line   47)
* myisampack, join option:               myisampack.         (line   78)
* myisampack, silent option:             myisampack.         (line   93)
* myisampack, test option:               myisampack.         (line   97)
* myisampack, tmpdir option:             myisampack.         (line  101)
* myisampack, verbose option:            myisampack.         (line  106)
* myisampack, version option:            myisampack.         (line  111)
* myisampack, wait option:               myisampack.         (line  115)
* MyODBC:                                connector-odbc.     (line   17)
* mysql <1>:                             glossary.           (line 1970)
* mysql <2>:                             mysql.              (line   15)
* mysql:                                 programs-overview.  (line  106)
* mysql \. (command for reading from text files) <1>: mysql-batch-commands.
                                                             (line    6)
* mysql \. (command for reading from text files): batch-mode.
                                                             (line   90)
* MySQL binary distribution:             which-version.      (line   18)
* MYSQL C type:                          c-api-data-structures.
                                                             (line   10)
* MySQL Cluster:                         mysql-cluster.      (line   16)
* MySQL Cluster Disk Data:               mysql-cluster-disk-data.
                                                             (line   12)
* MySQL Cluster Disk Data, creating log file groups: mysql-cluster-disk-data-objects.
                                                             (line   63)
* MySQL Cluster Disk Data, creating tables: mysql-cluster-disk-data-objects.
                                                             (line   43)
* MySQL Cluster Disk Data, creating tablespaces: mysql-cluster-disk-data-objects.
                                                             (line  126)
* MySQL Cluster Disk Data, dropping Disk Data objects: mysql-cluster-disk-data-objects.
                                                             (line  249)
* MySQL Cluster Disk Data, storage requirements: mysql-cluster-disk-data-storage-requirements.
                                                             (line    6)
* MySQL Cluster How-To:                  mysql-cluster-installation.
                                                             (line   16)
* MySQL Cluster limitations:             mysql-cluster-limitations.
                                                             (line   20)
* MySQL Cluster limitations, and differences from standard MySQL limits: mysql-cluster-limitations-limits.
                                                             (line    6)
* MySQL Cluster limitations, binary logging: mysql-cluster-limitations-exclusive-to-cluster.
                                                             (line   22)
* MySQL Cluster limitations, CREATE TABLE statements: mysql-cluster-limitations-resolved.
                                                             (line   75)
* MySQL Cluster limitations, database objects: mysql-cluster-limitations-database-objects.
                                                             (line    6)
* MySQL Cluster limitations, Disk Data storage: mysql-cluster-limitations-disk-data.
                                                             (line    6)
* MySQL Cluster limitations, error handling and reporting: mysql-cluster-limitations-error-handling.
                                                             (line    6)
* MySQL Cluster limitations, geometry data types: mysql-cluster-limitations-syntax.
                                                             (line   86)
* MySQL Cluster limitations, implementation: mysql-cluster-limitations-exclusive-to-cluster.
                                                             (line    6)
* MySQL Cluster limitations, imposed by configuration: mysql-cluster-limitations-limits.
                                                             (line   37)
* MySQL Cluster limitations, INSERT IGNORE, UPDATE IGNORE, and REPLACE statements: mysql-cluster-limitations-resolved.
                                                             (line   81)
* MySQL Cluster limitations, memory usage and transaction handling: mysql-cluster-limitations-transactions.
                                                             (line  101)
* MySQL Cluster limitations, multiple data nodes: mysql-cluster-limitations-resolved.
                                                             (line   59)
* MySQL Cluster limitations, multiple management servers: mysql-cluster-limitations-multiple-nodes.
                                                             (line   29)
* MySQL Cluster limitations, multiple MySQL servers: mysql-cluster-limitations-multiple-nodes.
                                                             (line    8)
* MySQL Cluster limitations, partitioning: mysql-cluster-limitations-syntax.
                                                             (line  105)
* MySQL Cluster limitations, performance: mysql-cluster-limitations-performance.
                                                             (line    6)
* MySQL Cluster limitations, replication <1>: mysql-cluster-limitations-resolved.
                                                             (line   35)
* MySQL Cluster limitations, replication: mysql-cluster-limitations-syntax.
                                                             (line  159)
* MySQL Cluster limitations, resolved in current version from previous versions: mysql-cluster-limitations-resolved.
                                                             (line    6)
* MySQL Cluster limitations, syntax:     mysql-cluster-limitations-syntax.
                                                             (line    6)
* MySQL Cluster limitations, transactions: mysql-cluster-limitations-transactions.
                                                             (line    6)
* MySQL Cluster limitations, unsupported features: mysql-cluster-limitations-unsupported.
                                                             (line    6)
* MySQL Cluster Manager, and ndb_mgm:    mysql-cluster-mgm-client-commands.
                                                             (line   17)
* MySQL Cluster NDB 7.2:                 mysql-cluster-development.
                                                             (line   10)
* MySQL Cluster processes:               mysql-cluster-programs.
                                                             (line   34)
* MySQL Cluster programs:                mysql-cluster-programs.
                                                             (line   34)
* MySQL Cluster replication:             mysql-cluster-replication.
                                                             (line   20)
* MySQL Cluster replication, and -initial option: mysql-cluster-replication-issues.
                                                             (line  173)
* MySQL Cluster replication, and circular replication: mysql-cluster-replication-issues.
                                                             (line   60)
* MySQL Cluster Replication, and NDB API _slave status variables: mysql-cluster-replication.
                                                             (line   61)
* MySQL Cluster replication, and primary key: mysql-cluster-replication-issues.
                                                             (line  119)
* MySQL Cluster replication, and single point of failure: mysql-cluster-replication-two-channels.
                                                             (line    6)
* MySQL Cluster replication, and unique keys: mysql-cluster-replication-issues.
                                                             (line  127)
* MySQL Cluster replication, backups:    mysql-cluster-replication-backups.
                                                             (line   11)
* MySQL Cluster replication, circular replication: mysql-cluster-replication-multi-master.
                                                             (line    6)
* MySQL Cluster replication, concepts <1>: mysql-cluster-replication-general.
                                                             (line    6)
* MySQL Cluster replication, concepts:   mysql-cluster-replication-abbreviations.
                                                             (line    6)
* MySQL Cluster replication, conflict resolution: mysql-cluster-replication-conflict-resolution.
                                                             (line    6)
* MySQL Cluster replication, failover <1>: mysql-cluster-replication-failover.
                                                             (line    6)
* MySQL Cluster replication, failover:   mysql-cluster-replication-two-channels.
                                                             (line    6)
* MySQL Cluster replication, gap event:  mysql-cluster-replication-issues.
                                                             (line   29)
* MySQL Cluster replication, known issues: mysql-cluster-replication-issues.
                                                             (line    6)
* MySQL Cluster replication, loss of connection: mysql-cluster-replication-issues.
                                                             (line   11)
* MySQL Cluster replication, multi-master replication: mysql-cluster-replication-multi-master.
                                                             (line    6)
* MySQL Cluster replication, point-in-time recovery: mysql-cluster-replication-pitr.
                                                             (line    6)
* MySQL Cluster replication, preparing:  mysql-cluster-replication-preparation.
                                                             (line    6)
* MySQL Cluster replication, requirements: mysql-cluster-replication-general.
                                                             (line    6)
* MySQL Cluster replication, reset-slave.pl backup automation script: mysql-cluster-replication-auto-sync.
                                                             (line   11)
* MySQL Cluster replication, restoring from backup: mysql-cluster-replication-backups.
                                                             (line   11)
* MySQL Cluster replication, starting:   mysql-cluster-replication-starting.
                                                             (line    6)
* MySQL Cluster replication, storage engines other than NDB on slave: mysql-cluster-replication-issues.
                                                             (line  221)
* MySQL Cluster replication, synchronization of master and slave: mysql-cluster-replication-auto-sync.
                                                             (line    6)
* MySQL Cluster replication, system tables used: mysql-cluster-replication-schema.
                                                             (line    6)
* MySQL Cluster, "quick" configuration:  mysql-cluster-quick.
                                                             (line    6)
* MySQL Cluster, administration <1>:     mysql-cluster-log-statistics.
                                                             (line    6)
* MySQL Cluster, administration <2>:     mysql-cluster-mgm-client-commands.
                                                             (line    6)
* MySQL Cluster, administration <3>:     mysql-cluster-program-options-common.
                                                             (line    6)
* MySQL Cluster, administration <4>:     mysql-cluster-programs-ndb-mgm.
                                                             (line    6)
* MySQL Cluster, administration <5>:     mysql-cluster-programs-ndb-mgmd.
                                                             (line   12)
* MySQL Cluster, administration <6>:     mysql-cluster-programs-ndbd.
                                                             (line   17)
* MySQL Cluster, administration:         mysql-cluster-program-options-mysqld.
                                                             (line    6)
* MySQL Cluster, and application feature requirements: mysql-cluster-ndb-innodb-usage.
                                                             (line    6)
* MySQL Cluster, and DNS:                mysql-cluster-installation.
                                                             (line   61)
* MySQL Cluster, and INFORMATION_SCHEMA: mysql-cluster-security-mysql-privileges.
                                                             (line   96)
* MySQL Cluster, and IP addressing:      mysql-cluster-installation.
                                                             (line   61)
* MySQL Cluster, and MySQL privileges:   mysql-cluster-security-mysql-privileges.
                                                             (line    6)
* MySQL Cluster, and MySQL root user <1>: mysql-cluster-security-mysql-security-procedures.
                                                             (line   50)
* MySQL Cluster, and MySQL root user:    mysql-cluster-security-mysql-privileges.
                                                             (line   33)
* MySQL Cluster, and networking:         mysql-cluster-overview-requirements.
                                                             (line    6)
* MySQL Cluster, and transactions:       mysql-cluster-ndbd-definition.
                                                             (line  384)
* MySQL Cluster, API node <1>:           mysql-cluster-api-definition.
                                                             (line    6)
* MySQL Cluster, API node:               mysql-cluster-basics.
                                                             (line    6)
* MySQL Cluster, applications supported: mysql-cluster-ndb-innodb-workloads.
                                                             (line    6)
* MySQL Cluster, availability:           mysql-cluster-compared.
                                                             (line   36)
* MySQL Cluster, available platforms:    mysql-cluster.      (line   49)
* MySQL Cluster, backups <1>:            mysql-cluster-backup-troubleshooting.
                                                             (line    6)
* MySQL Cluster, backups <2>:            mysql-cluster-backup-configuration.
                                                             (line    6)
* MySQL Cluster, backups <3>:            mysql-cluster-backup-using-management-client.
                                                             (line    6)
* MySQL Cluster, backups <4>:            mysql-cluster-backup-concepts.
                                                             (line    6)
* MySQL Cluster, backups <5>:            mysql-cluster-backup.
                                                             (line   13)
* MySQL Cluster, backups:                mysql-cluster-programs-ndb-restore.
                                                             (line    6)
* MySQL Cluster, benchmarks:             mysql-cluster-interconnects-performance.
                                                             (line    6)
* MySQL Cluster, binlog_format system variable: replication-options-binary-log.
                                                             (line  582)
* MySQL Cluster, CHECKPOINT Events:      mysql-cluster-log-events.
                                                             (line   39)
* MySQL Cluster, cluster logs <1>:       mysql-cluster-logging-management-commands.
                                                             (line    6)
* MySQL Cluster, cluster logs:           mysql-cluster-event-reports.
                                                             (line   12)
* MySQL Cluster, CLUSTERLOG commands:    mysql-cluster-logging-management-commands.
                                                             (line   12)
* MySQL Cluster, CLUSTERLOG STATISTICS command: mysql-cluster-log-statistics.
                                                             (line    6)
* MySQL Cluster, commands <1>:           mysql-cluster-mgm-client-commands.
                                                             (line    6)
* MySQL Cluster, commands <2>:           mysql-cluster-programs-ndb-mgm.
                                                             (line   27)
* MySQL Cluster, commands <3>:           mysql-cluster-programs-ndb-mgmd.
                                                             (line   12)
* MySQL Cluster, commands <4>:           mysql-cluster-programs-ndbd.
                                                             (line   17)
* MySQL Cluster, commands:               mysql-cluster-program-options-mysqld.
                                                             (line    6)
* MySQL Cluster, compared to InnoDB <1>: mysql-cluster-ndb-innodb-usage.
                                                             (line    6)
* MySQL Cluster, compared to InnoDB <2>: mysql-cluster-ndb-innodb-workloads.
                                                             (line    6)
* MySQL Cluster, compared to InnoDB <3>: mysql-cluster-ndb-innodb-engines.
                                                             (line    6)
* MySQL Cluster, compared to InnoDB:     mysql-cluster-compared.
                                                             (line   12)
* MySQL Cluster, compared to standalone MySQL Server <1>: mysql-cluster-ndb-innodb-usage.
                                                             (line    6)
* MySQL Cluster, compared to standalone MySQL Server <2>: mysql-cluster-ndb-innodb-workloads.
                                                             (line    6)
* MySQL Cluster, compared to standalone MySQL Server <3>: mysql-cluster-ndb-innodb-engines.
                                                             (line    6)
* MySQL Cluster, compared to standalone MySQL Server: mysql-cluster-compared.
                                                             (line   12)
* MySQL Cluster, compiling with icc:     porting.            (line   29)
* MySQL Cluster, concepts:               mysql-cluster-basics.
                                                             (line    6)
* MySQL Cluster, configuration <1>:      mysql-cluster-mysqld.
                                                             (line   52)
* MySQL Cluster, configuration <2>:      mysql-cluster-programs-ndb-mgmd.
                                                             (line  554)
* MySQL Cluster, configuration <3>:      mysql-cluster-api-definition.
                                                             (line    6)
* MySQL Cluster, configuration <4>:      mysql-cluster-ndbd-definition.
                                                             (line    6)
* MySQL Cluster, configuration <5>:      mysql-cluster-mgm-definition.
                                                             (line    6)
* MySQL Cluster, configuration <6>:      mysql-cluster-computer-definition.
                                                             (line    6)
* MySQL Cluster, configuration <7>:      mysql-cluster-quick.
                                                             (line    6)
* MySQL Cluster, configuration <8>:      mysql-cluster-configuration.
                                                             (line   14)
* MySQL Cluster, configuration:          mysql-cluster-installation.
                                                             (line   16)
* MySQL Cluster, configuration (example): mysql-cluster-config-example.
                                                             (line    6)
* MySQL Cluster, configuration changes:  mysql-cluster-rolling-restart.
                                                             (line   20)
* MySQL Cluster, configuration files <1>: mysql-cluster-config-file.
                                                             (line   21)
* MySQL Cluster, configuration files:    mysql-cluster-install-configuration.
                                                             (line    6)
* MySQL Cluster, configuration parameters <1>: mysql-cluster-params-other.
                                                             (line    6)
* MySQL Cluster, configuration parameters <2>: mysql-cluster-params-api.
                                                             (line    6)
* MySQL Cluster, configuration parameters <3>: mysql-cluster-params-mgmd.
                                                             (line    6)
* MySQL Cluster, configuration parameters <4>: mysql-cluster-params-ndbd.
                                                             (line    6)
* MySQL Cluster, configuration parameters: mysql-cluster-params-overview.
                                                             (line   13)
* MySQL Cluster, configuring:            mysql-cluster-backup-configuration.
                                                             (line    6)
* MySQL Cluster, CONNECTION Events:      mysql-cluster-log-events.
                                                             (line   20)
* MySQL Cluster, connection string:      mysql-cluster-connection-strings.
                                                             (line    6)
* MySQL Cluster, CREATE NODEGROUP command: mysql-cluster-mgm-client-commands.
                                                             (line  191)
* MySQL Cluster, creating large tables:  create-table.       (line  820)
* MySQL Cluster, data node <1>:          mysql-cluster-ndbd-definition.
                                                             (line    6)
* MySQL Cluster, data node:              mysql-cluster-basics.
                                                             (line    6)
* MySQL Cluster, data nodes <1>:         mysql-cluster-programs-ndbmtd.
                                                             (line    6)
* MySQL Cluster, data nodes:             mysql-cluster-programs-ndbd.
                                                             (line    6)
* MySQL Cluster, defining node hosts:    mysql-cluster-computer-definition.
                                                             (line    6)
* MySQL Cluster, direct connections between nodes: mysql-cluster-tcp-definition-direct.
                                                             (line    6)
* MySQL Cluster, Disk Data tables:       mysql-cluster-disk-data.
                                                             (line   12)
* MySQL Cluster, DROP NODEGROUP command: mysql-cluster-mgm-client-commands.
                                                             (line  213)
* MySQL Cluster, ENTER SINGLE USER MODE command: mysql-cluster-mgm-client-commands.
                                                             (line  158)
* MySQL Cluster, ERROR Events:           mysql-cluster-log-events.
                                                             (line  219)
* MySQL Cluster, error logs:             mysql-cluster-programs-ndbd.
                                                             (line  418)
* MySQL Cluster, event log format:       mysql-cluster-log-events.
                                                             (line    6)
* MySQL Cluster, event logging thresholds: mysql-cluster-logging-management-commands.
                                                             (line   38)
* MySQL Cluster, event logs <1>:         mysql-cluster-logging-management-commands.
                                                             (line    6)
* MySQL Cluster, event logs:             mysql-cluster-event-reports.
                                                             (line   12)
* MySQL Cluster, event severity levels:  mysql-cluster-logging-management-commands.
                                                             (line   62)
* MySQL Cluster, event types <1>:        mysql-cluster-log-events.
                                                             (line   20)
* MySQL Cluster, event types:            mysql-cluster-event-reports.
                                                             (line   49)
* MySQL Cluster, execution threads:      mysql-cluster-ndbd-definition.
                                                             (line 2932)
* MySQL Cluster, EXIT command:           mysql-cluster-mgm-client-commands.
                                                             (line  176)
* MySQL Cluster, EXIT SINGLE USER MODE command: mysql-cluster-mgm-client-commands.
                                                             (line  166)
* MySQL Cluster, FAQ:                    faqs-mysql-cluster. (line    6)
* MySQL Cluster, GCP Stop errors:        mysql-cluster-ndbd-definition.
                                                             (line 3538)
* MySQL Cluster, general description:    mysql-cluster-overview.
                                                             (line   15)
* MySQL Cluster, HELP command:           mysql-cluster-mgm-client-commands.
                                                             (line   34)
* MySQL Cluster, HostName parameter, and security: mysql-cluster-security-networking-issues.
                                                             (line   40)
* MySQL Cluster, INFO Events:            mysql-cluster-log-events.
                                                             (line  237)
* MySQL Cluster, information sources:    mysql-cluster.      (line  187)
* MySQL Cluster, insecurity of communication protocols: mysql-cluster-security-networking-issues.
                                                             (line   12)
* MySQL Cluster, installation:           mysql-cluster-installation.
                                                             (line   16)
* MySQL Cluster, installation (Linux):   mysql-cluster-install-linux.
                                                             (line   12)
* MySQL Cluster, installation (Windows): mysql-cluster-install-windows.
                                                             (line   13)
* MySQL Cluster, installing binary (Windows): mysql-cluster-install-windows-binary.
                                                             (line    6)
* MySQL Cluster, installing binary release (Linux): mysql-cluster-install-linux-binary.
                                                             (line    6)
* MySQL Cluster, installing from source (Linux): mysql-cluster-install-linux-source.
                                                             (line    6)
* MySQL Cluster, installing from source (Windows): mysql-cluster-install-windows-source.
                                                             (line    6)
* MySQL Cluster, installing RPM (Linux): mysql-cluster-install-linux-rpm.
                                                             (line    6)
* MySQL Cluster, interconnects:          mysql-cluster-interconnects.
                                                             (line   11)
* MySQL Cluster, Java clients:           mysql-cluster-basics.
                                                             (line  115)
* MySQL Cluster, log files <1>:          mysql-cluster-programs-ndbmtd.
                                                             (line   64)
* MySQL Cluster, log files:              mysql-cluster-programs-ndbd.
                                                             (line  409)
* MySQL Cluster, logging commands:       mysql-cluster-logging-management-commands.
                                                             (line    6)
* MySQL Cluster, management client (ndb_mgm): mysql-cluster-programs-ndb-mgm.
                                                             (line    6)
* MySQL Cluster, management commands:    mysql-cluster-log-statistics.
                                                             (line    6)
* MySQL Cluster, management node <1>:    mysql-cluster-mgm-definition.
                                                             (line    6)
* MySQL Cluster, management node:        mysql-cluster-basics.
                                                             (line    6)
* MySQL Cluster, management nodes:       mysql-cluster-programs-ndb-mgmd.
                                                             (line    6)
* MySQL Cluster, managing:               mysql-cluster-management.
                                                             (line   24)
* MySQL Cluster, MAX_ROWS:               create-table.       (line  820)
* MySQL Cluster, memory usage and recovery <1>: mysql-cluster-rolling-restart.
                                                             (line   63)
* MySQL Cluster, memory usage and recovery: mysql-cluster-limitations-limits.
                                                             (line    9)
* MySQL Cluster, mgm:                    mysql-cluster-program-options-common.
                                                             (line    6)
* MySQL Cluster, mgm client:             mysql-cluster-mgm-client-commands.
                                                             (line    6)
* MySQL Cluster, mgm management client:  mysql-cluster-log-statistics.
                                                             (line    6)
* MySQL Cluster, mgm process:            mysql-cluster-programs-ndb-mgm.
                                                             (line   27)
* MySQL Cluster, mgmd:                   mysql-cluster-program-options-common.
                                                             (line    6)
* MySQL Cluster, mgmd process:           mysql-cluster-programs-ndb-mgmd.
                                                             (line   12)
* MySQL Cluster, monitoring:             mysql-cluster-ndb-api-statistics.
                                                             (line    6)
* MySQL Cluster, multiple management servers: mysql-cluster-rolling-restart.
                                                             (line  129)
* MySQL Cluster, mysqld options and variables for: mysql-cluster-options-variables.
                                                             (line   13)
* MySQL Cluster, mysqld process <1>:     mysql-cluster-mysqld.
                                                             (line    6)
* MySQL Cluster, mysqld process:         mysql-cluster-program-options-mysqld.
                                                             (line    6)
* MySQL Cluster, ndb_mgm <1>:            mysql-cluster-programs-ndb-mgm.
                                                             (line    6)
* MySQL Cluster, ndb_mgm:                mysql-cluster-install-first-start.
                                                             (line   34)
* MySQL Cluster, ndb_mgmd process:       mysql-cluster-programs-ndb-mgmd.
                                                             (line    6)
* MySQL Cluster, ndbd <1>:               mysql-cluster-program-options-common.
                                                             (line    6)
* MySQL Cluster, ndbd:                   mysql-cluster-programs-ndbd.
                                                             (line    6)
* MySQL Cluster, ndbd process <1>:       mysql-cluster-log-statistics.
                                                             (line  164)
* MySQL Cluster, ndbd process:           mysql-cluster-programs-ndbd.
                                                             (line   17)
* MySQL Cluster, ndbinfo_select_all:     mysql-cluster-programs-ndbinfo-select-all.
                                                             (line    6)
* MySQL Cluster, ndbmtd:                 mysql-cluster-programs-ndbmtd.
                                                             (line    6)
* MySQL Cluster, network configuration, and security: mysql-cluster-security-networking-issues.
                                                             (line   59)
* MySQL Cluster, network transporters <1>: mysql-cluster-sci-sockets.
                                                             (line    6)
* MySQL Cluster, network transporters:   mysql-cluster-interconnects.
                                                             (line   11)
* MySQL Cluster, networking <1>:         mysql-cluster-sci-definition.
                                                             (line    6)
* MySQL Cluster, networking <2>:         mysql-cluster-shm-definition.
                                                             (line    6)
* MySQL Cluster, networking:             mysql-cluster-tcp-definition-direct.
                                                             (line    6)
* MySQL Cluster, node failure (single user mode): mysql-cluster-single-user-mode.
                                                             (line   51)
* MySQL Cluster, node identifiers <1>:   mysql-cluster-sci-definition.
                                                             (line   26)
* MySQL Cluster, node identifiers:       mysql-cluster-shm-definition.
                                                             (line   25)
* MySQL Cluster, node logs:              mysql-cluster-event-reports.
                                                             (line   12)
* MySQL Cluster, NODERESTART Events:     mysql-cluster-log-events.
                                                             (line  103)
* MySQL Cluster, nodes and node groups:  mysql-cluster-nodes-groups.
                                                             (line    6)
* MySQL Cluster, nodes and types:        mysql-cluster-basics.
                                                             (line    6)
* MySQL Cluster, partitioning support:   mysql-cluster-limitations-syntax.
                                                             (line  105)
* MySQL Cluster, partitions:             mysql-cluster-nodes-groups.
                                                             (line    6)
* MySQL Cluster, performance:            mysql-cluster-interconnects-performance.
                                                             (line    6)
* MySQL Cluster, performing queries:     mysql-cluster-install-example-data.
                                                             (line    6)
* MySQL Cluster, preparing for replication: mysql-cluster-replication-preparation.
                                                             (line    6)
* MySQL Cluster, process management:     mysql-cluster-programs.
                                                             (line   34)
* MySQL Cluster, QUIT command:           mysql-cluster-mgm-client-commands.
                                                             (line  176)
* MySQL Cluster, replicas:               mysql-cluster-nodes-groups.
                                                             (line    6)
* MySQL Cluster, replication:            mysql-cluster-replication.
                                                             (line   20)
* MySQL Cluster, REPORT command:         mysql-cluster-mgm-client-commands.
                                                             (line  126)
* MySQL Cluster, requirements:           mysql-cluster-overview-requirements.
                                                             (line    6)
* MySQL Cluster, resetting:              mysql-cluster-rolling-restart.
                                                             (line   38)
* MySQL Cluster, RESTART command:        mysql-cluster-mgm-client-commands.
                                                             (line   89)
* MySQL Cluster, restarting:             mysql-cluster-install-shutdown-restart.
                                                             (line    6)
* MySQL Cluster, restoring backups:      mysql-cluster-programs-ndb-restore.
                                                             (line    6)
* MySQL Cluster, rolling restarts (multiple management servers): mysql-cluster-rolling-restart.
                                                             (line  129)
* MySQL Cluster, runtime statistics:     mysql-cluster-log-statistics.
                                                             (line    6)
* MySQL Cluster, SCI (Scalable Coherent Interface) <1>: mysql-cluster-sci-sockets.
                                                             (line    6)
* MySQL Cluster, SCI (Scalable Coherent Interface): mysql-cluster-sci-definition.
                                                             (line    6)
* MySQL Cluster, security:               mysql-cluster-security.
                                                             (line   12)
* MySQL Cluster, security procedures:    mysql-cluster-security-mysql-security-procedures.
                                                             (line    6)
* MySQL Cluster, security, and firewalls: mysql-cluster-security-networking-issues.
                                                             (line   98)
* MySQL Cluster, security, and HostName parameter: mysql-cluster-security-networking-issues.
                                                             (line   40)
* MySQL Cluster, security, and network configuration: mysql-cluster-security-networking-issues.
                                                             (line   59)
* MySQL Cluster, security, and network ports: mysql-cluster-security-networking-issues.
                                                             (line  186)
* MySQL Cluster, security, and remote administration: mysql-cluster-security-networking-issues.
                                                             (line  193)
* MySQL Cluster, security, networking:   mysql-cluster-security-networking-issues.
                                                             (line    6)
* MySQL Cluster, shared memory transport: mysql-cluster-shm-definition.
                                                             (line    6)
* MySQL Cluster, SHOW command:           mysql-cluster-mgm-client-commands.
                                                             (line   38)
* MySQL Cluster, SHUTDOWN command:       mysql-cluster-mgm-client-commands.
                                                             (line  182)
* MySQL Cluster, shutting down:          mysql-cluster-install-shutdown-restart.
                                                             (line    6)
* MySQL Cluster, single user mode <1>:   mysql-cluster-single-user-mode.
                                                             (line    6)
* MySQL Cluster, single user mode:       mysql-cluster-mgm-client-commands.
                                                             (line  158)
* MySQL Cluster, SQL node <1>:           mysql-cluster-api-definition.
                                                             (line    6)
* MySQL Cluster, SQL node:               mysql-cluster-basics.
                                                             (line    6)
* MySQL Cluster, SQL nodes:              mysql-cluster-mysqld.
                                                             (line    6)
* MySQL Cluster, SQL statements for monitoring: mysql-cluster-sql-statements.
                                                             (line    6)
* MySQL Cluster, START BACKUP command:   mysql-cluster-replication-backups.
                                                             (line   40)
* MySQL Cluster, START command:          mysql-cluster-mgm-client-commands.
                                                             (line   46)
* MySQL Cluster, start phases (summary): mysql-cluster-start-phases.
                                                             (line    6)
* MySQL Cluster, starting:               mysql-cluster-quick.
                                                             (line    6)
* MySQL Cluster, starting nodes <1>:     mysql-cluster-install-first-start.
                                                             (line    6)
* MySQL Cluster, starting nodes:         mysql-cluster-install-windows-initial-start.
                                                             (line    6)
* MySQL Cluster, starting or restarting: mysql-cluster-start-phases.
                                                             (line    6)
* MySQL Cluster, STARTUP Events:         mysql-cluster-log-events.
                                                             (line   62)
* MySQL Cluster, STATISTICS Events:      mysql-cluster-log-events.
                                                             (line  191)
* MySQL Cluster, STATUS command:         mysql-cluster-mgm-client-commands.
                                                             (line  118)
* MySQL Cluster, status variables:       mysql-cluster-status-variables.
                                                             (line    6)
* MySQL Cluster, STOP command:           mysql-cluster-mgm-client-commands.
                                                             (line   61)
* MySQL Cluster, storage requirements:   storage-requirements.
                                                             (line   35)
* MySQL Cluster, thread states:          mysql-cluster-thread-states.
                                                             (line    6)
* MySQL Cluster, trace files:            mysql-cluster-programs-ndbd.
                                                             (line  450)
* MySQL Cluster, transaction handling:   mysql-cluster-limitations-transactions.
                                                             (line  101)
* MySQL Cluster, transporters, Scalable Coherent Interface (SCI): mysql-cluster-sci-definition.
                                                             (line    6)
* MySQL Cluster, transporters, shared memory (SHM): mysql-cluster-shm-definition.
                                                             (line    6)
* MySQL Cluster, transporters, TCP/IP:   mysql-cluster-tcp-definition-direct.
                                                             (line    6)
* MySQL Cluster, troubleshooting backups: mysql-cluster-backup-troubleshooting.
                                                             (line    6)
* MySQL Cluster, upgrades and downgrades <1>: mysql-cluster-rolling-restart.
                                                             (line    6)
* MySQL Cluster, upgrades and downgrades: mysql-cluster-upgrade-downgrade.
                                                             (line    6)
* MySQL Cluster, using tables and data:  mysql-cluster-install-example-data.
                                                             (line    6)
* mysql command options:                 mysql-command-options.
                                                             (line    6)
* mysql commands, list of:               mysql-commands.     (line   11)
* MySQL Dolphin name:                    history.            (line    6)
* MySQL Enterprise Audit <1>:            mysql-enterprise-audit.
                                                             (line    6)
* MySQL Enterprise Audit:                audit-log-plugin.   (line   15)
* MySQL Enterprise Backup <1>:           glossary.           (line 1975)
* MySQL Enterprise Backup:               mysql-enterprise-backup.
                                                             (line    6)
* MySQL Enterprise Monitor:              mysql-enterprise-monitor.
                                                             (line    6)
* MySQL Enterprise Security <1>:         mysql-enterprise-security.
                                                             (line    6)
* MySQL Enterprise Security <2>:         windows-authentication-plugin.
                                                             (line   11)
* MySQL Enterprise Security:             pam-authentication-plugin.
                                                             (line   12)
* MySQL Enterprise Thread Pool:          mysql-enterprise-thread-pool.
                                                             (line    6)
* MySQL history:                         history.            (line    6)
* mysql history file:                    mysql-logging.      (line    6)
* MySQL Installer:                       mysql-installer.    (line   11)
* MySQL mailing lists:                   mailing-lists.      (line   10)
* MySQL name:                            history.            (line    6)
* MySQL Notifier:                        windows-notifier.   (line   10)
* MySQL privileges, and MySQL Cluster:   mysql-cluster-security-mysql-privileges.
                                                             (line   10)
* mysql prompt command:                  mysql-commands.     (line  290)
* MySQL server, mysqld <1>:              mysqld-server.      (line   21)
* MySQL server, mysqld:                  mysqld.             (line    6)
* mysql source (command for reading from text files) <1>: mysql-batch-commands.
                                                             (line    6)
* mysql source (command for reading from text files): batch-mode.
                                                             (line   90)
* MySQL source distribution:             which-version.      (line   18)
* MySQL storage engines:                 storage-engines.    (line   22)
* MySQL system tables, and MySQL Cluster: mysql-cluster-security-mysql-privileges.
                                                             (line   23)
* MySQL system tables, and replication:  replication-features-mysqldb.
                                                             (line    6)
* MySQL Thread Pool:                     thread-pool-plugin. (line   12)
* MySQL version:                         getting-mysql.      (line    6)
* mysql, auto-rehash option:             mysql-command-options.
                                                             (line  166)
* mysql, auto-vertical-output option:    mysql-command-options.
                                                             (line  180)
* mysql, batch option:                   mysql-command-options.
                                                             (line  187)
* mysql, bind-address option:            mysql-command-options.
                                                             (line  197)
* mysql, character-sets-dir option:      mysql-command-options.
                                                             (line  207)
* mysql, charset command:                mysql-commands.     (line   61)
* mysql, clear command:                  mysql-commands.     (line   69)
* mysql, column-names option:            mysql-command-options.
                                                             (line  212)
* mysql, column-type-info option:        mysql-command-options.
                                                             (line  216)
* mysql, comments option:                mysql-command-options.
                                                             (line  220)
* mysql, compress option:                mysql-command-options.
                                                             (line  226)
* mysql, connect command:                mysql-commands.     (line   74)
* mysql, database option:                mysql-command-options.
                                                             (line  231)
* mysql, debug option:                   mysql-command-options.
                                                             (line  235)
* mysql, debug-check option:             mysql-command-options.
                                                             (line  240)
* mysql, debug-info option:              mysql-command-options.
                                                             (line  244)
* mysql, default-auth option:            mysql-command-options.
                                                             (line  249)
* mysql, default-character-set option:   mysql-command-options.
                                                             (line  256)
* MySQL, defined:                        what-is-mysql.      (line    6)
* mysql, delimiter command:              mysql-commands.     (line   81)
* mysql, delimiter option:               mysql-command-options.
                                                             (line  270)
* mysql, disable named commands:         mysql-command-options.
                                                             (line  275)
* mysql, edit command:                   mysql-commands.     (line  116)
* mysql, ego command:                    mysql-commands.     (line  125)
* mysql, enable-cleartext-plugin option: mysql-command-options.
                                                             (line  283)
* mysql, execute option:                 mysql-command-options.
                                                             (line  289)
* mysql, exit command:                   mysql-commands.     (line  130)
* mysql, force option:                   mysql-command-options.
                                                             (line  296)
* mysql, go command:                     mysql-commands.     (line  134)
* mysql, help command:                   mysql-commands.     (line   51)
* mysql, help option:                    mysql-command-options.
                                                             (line  162)
* mysql, host option:                    mysql-command-options.
                                                             (line  300)
* mysql, html option:                    mysql-command-options.
                                                             (line  304)
* mysql, i-am-a-dummy option:            mysql-command-options.
                                                             (line  503)
* mysql, ignore-spaces option:           mysql-command-options.
                                                             (line  308)
* mysql, init-command option:            mysql-command-options.
                                                             (line  314)
* MySQL, introduction:                   what-is-mysql.      (line    6)
* mysql, line-numbers option:            mysql-command-options.
                                                             (line  320)
* mysql, local-infile option:            mysql-command-options.
                                                             (line  325)
* mysql, named-commands option:          mysql-command-options.
                                                             (line  333)
* mysql, no-auto-rehash option:          mysql-command-options.
                                                             (line  340)
* mysql, no-beep option:                 mysql-command-options.
                                                             (line  345)
* mysql, no-named-commands option:       mysql-command-options.
                                                             (line  349)
* mysql, no-pager option:                mysql-command-options.
                                                             (line  354)
* mysql, no-tee option:                  mysql-command-options.
                                                             (line  359)
* mysql, nopager command:                mysql-commands.     (line  138)
* mysql, notee command:                  mysql-commands.     (line  144)
* mysql, nowarning command:              mysql-commands.     (line  149)
* mysql, one-database option:            mysql-command-options.
                                                             (line  364)
* mysql, pager command:                  mysql-commands.     (line  153)
* mysql, pager option:                   mysql-command-options.
                                                             (line  407)
* mysql, password option:                mysql-command-options.
                                                             (line  416)
* mysql, pipe option:                    mysql-command-options.
                                                             (line  428)
* mysql, plugin-dir option:              mysql-command-options.
                                                             (line  433)
* mysql, port option:                    mysql-command-options.
                                                             (line  442)
* mysql, print command:                  mysql-commands.     (line  175)
* mysql, prompt command:                 mysql-commands.     (line  179)
* mysql, prompt option:                  mysql-command-options.
                                                             (line  446)
* MySQL, pronunciation:                  what-is-mysql.      (line  107)
* mysql, protocol option:                mysql-command-options.
                                                             (line  452)
* mysql, quick option:                   mysql-command-options.
                                                             (line  459)
* mysql, quit command:                   mysql-commands.     (line  188)
* mysql, raw option:                     mysql-command-options.
                                                             (line  465)
* mysql, reconnect option:               mysql-command-options.
                                                             (line  496)
* mysql, rehash command:                 mysql-commands.     (line  192)
* mysql, safe-updates option:            mysql-command-options.
                                                             (line  503)
* mysql, secure-auth option:             mysql-command-options.
                                                             (line  511)
* mysql, show-warnings option:           mysql-command-options.
                                                             (line  523)
* mysql, sigint-ignore option:           mysql-command-options.
                                                             (line  528)
* mysql, silent option:                  mysql-command-options.
                                                             (line  533)
* mysql, skip-column-names option:       mysql-command-options.
                                                             (line  542)
* mysql, skip-line-numbers option:       mysql-command-options.
                                                             (line  546)
* mysql, socket option:                  mysql-command-options.
                                                             (line  551)
* mysql, source command:                 mysql-commands.     (line  198)
* mysql, SSL options:                    mysql-command-options.
                                                             (line  556)
* mysql, status command:                 mysql-commands.     (line  203)
* mysql, system command:                 mysql-commands.     (line  210)
* mysql, table option:                   mysql-command-options.
                                                             (line  562)
* mysql, tee command:                    mysql-commands.     (line  216)
* mysql, tee option:                     mysql-command-options.
                                                             (line  568)
* mysql, unbuffered option:              mysql-command-options.
                                                             (line  574)
* MySQL, upgrading:                      mysql-upgrade.      (line    6)
* mysql, use command:                    mysql-commands.     (line  230)
* mysql, user option:                    mysql-command-options.
                                                             (line  578)
* mysql, verbose option:                 mysql-command-options.
                                                             (line  582)
* mysql, version option:                 mysql-command-options.
                                                             (line  589)
* mysql, vertical option:                mysql-command-options.
                                                             (line  593)
* mysql, wait option:                    mysql-command-options.
                                                             (line  599)
* mysql, warnings command:               mysql-commands.     (line  234)
* mysql, xml option:                     mysql-command-options.
                                                             (line  604)
* MySql.Data class:                      connector-net-ref.  (line   11)
* MySql.Data.dll library <1>:            connector-net-installation-unix.
                                                             (line    6)
* MySql.Data.dll library:                connector-net-installation-binary-windows-zip.
                                                             (line    6)
* mysql.data.ef.dll library:             connector-net-visual-studio.
                                                             (line   23)
* MySql.Data.MySqlClient.Replication:    connector-net-ref-replication.
                                                             (line   13)
* MySql.Data.MySqlClient.Replication namespace: connector-net-ref-replication.
                                                             (line   13)
* mysql.event table:                     events-privileges.  (line  138)
* mysql.ndb_binlog_index table:          mysql-cluster-replication-schema.
                                                             (line    6)
* mysql.server <1>:                      mysql-server.       (line    6)
* mysql.server:                          programs-overview.  (line   50)
* mysql.server, basedir option:          mysql-server.       (line   36)
* mysql.server, datadir option:          mysql-server.       (line   40)
* mysql.server, pid-file option:         mysql-server.       (line   44)
* mysql.server, service-startup-timeout option: mysql-server.
                                                             (line   49)
* mysql.server, use-mysqld_safe option:  mysql-server.       (line   57)
* mysql.server, user option:             mysql-server.       (line   62)
* mysql.sock, protection:                problems-with-mysql-sock.
                                                             (line    6)
* mysql.visualstudio.dll library:        connector-net-visual-studio.
                                                             (line   23)
* MYSQL323 SQL mode:                     server-sql-mode.    (line  530)
* MYSQL40 SQL mode:                      server-sql-mode.    (line  534)
* mysql_affected_rows():                 mysql-affected-rows.
                                                             (line    6)
* mysql_autocommit():                    mysql-autocommit.   (line    6)
* MYSQL_BIND C type:                     c-api-prepared-statement-data-structures.
                                                             (line   51)
* mysql_change_user():                   mysql-change-user.  (line    6)
* mysql_character_set_name():            mysql-character-set-name.
                                                             (line    6)
* mysql_client_find_plugin():            mysql-client-find-plugin.
                                                             (line    6)
* mysql_client_register_plugin():        mysql-client-register-plugin.
                                                             (line    6)
* mysql_close():                         mysql-close.        (line    6)
* mysql_cluster_move_privileges:         mysql-cluster-privilege-distribution.
                                                             (line   54)
* mysql_cluster_privileges_are_distributed: mysql-cluster-privilege-distribution.
                                                             (line   83)
* mysql_commit():                        mysql-commit.       (line    6)
* mysql_config:                          mysql-config.       (line    6)
* mysql_config, cflags option:           mysql-config.       (line   13)
* mysql_config, embedded option:         mysql-config.       (line   26)
* mysql_config, include option:          mysql-config.       (line   22)
* mysql_config, libmysqld-libs option:   mysql-config.       (line   26)
* mysql_config, libs option:             mysql-config.       (line   31)
* mysql_config, libs_r option:           mysql-config.       (line   36)
* mysql_config, plugindir option:        mysql-config.       (line   43)
* mysql_config, port option:             mysql-config.       (line   48)
* mysql_config, socket option:           mysql-config.       (line   52)
* mysql_config, version option:          mysql-config.       (line   56)
* mysql_connect():                       mysql-connect.      (line    6)
* mysql_convert_table_format <1>:        mysql-convert-table-format.
                                                             (line    6)
* mysql_convert_table_format:            programs-overview.  (line  193)
* mysql_convert_table_format, force option: mysql-convert-table-format.
                                                             (line   28)
* mysql_convert_table_format, help option: mysql-convert-table-format.
                                                             (line   24)
* mysql_convert_table_format, host option: mysql-convert-table-format.
                                                             (line   32)
* mysql_convert_table_format, password option: mysql-convert-table-format.
                                                             (line   36)
* mysql_convert_table_format, port option: mysql-convert-table-format.
                                                             (line   46)
* mysql_convert_table_format, socket option: mysql-convert-table-format.
                                                             (line   50)
* mysql_convert_table_format, type option: mysql-convert-table-format.
                                                             (line   54)
* mysql_convert_table_format, user option: mysql-convert-table-format.
                                                             (line   59)
* mysql_convert_table_format, verbose option: mysql-convert-table-format.
                                                             (line   63)
* mysql_convert_table_format, version option: mysql-convert-table-format.
                                                             (line   67)
* mysql_create_db():                     mysql-create-db.    (line    6)
* mysql_data_seek():                     mysql-data-seek.    (line    6)
* MYSQL_DATADIR option, CMake:           source-configuration-options.
                                                             (line  316)
* MYSQL_DEBUG environment variable <1>:  debugging-client.   (line   10)
* MYSQL_DEBUG environment variable <2>:  programs-overview.  (line  276)
* MYSQL_DEBUG environment variable:      environment-variables.
                                                             (line   18)
* mysql_debug():                         mysql-debug.        (line    6)
* mysql_drop_db():                       mysql-drop-db.      (line    6)
* mysql_dump_debug_info():               mysql-dump-debug-info.
                                                             (line    6)
* mysql_eof():                           mysql-eof.          (line    6)
* mysql_errno():                         mysql-errno.        (line    6)
* mysql_error():                         mysql-error.        (line    6)
* mysql_escape_string():                 mysql-escape-string.
                                                             (line    6)
* mysql_fetch_field():                   mysql-fetch-field.  (line    6)
* mysql_fetch_field_direct():            mysql-fetch-field-direct.
                                                             (line    6)
* mysql_fetch_fields():                  mysql-fetch-fields. (line    6)
* mysql_fetch_lengths():                 mysql-fetch-lengths.
                                                             (line    6)
* mysql_fetch_row():                     mysql-fetch-row.    (line    6)
* MYSQL_FIELD C type:                    c-api-data-structures.
                                                             (line   34)
* mysql_field_count() <1>:               mysql-num-fields.   (line    6)
* mysql_field_count():                   mysql-field-count.  (line    6)
* MYSQL_FIELD_OFFSET C type:             c-api-data-structures.
                                                             (line   44)
* mysql_field_seek():                    mysql-field-seek.   (line    6)
* mysql_field_tell():                    mysql-field-tell.   (line    6)
* mysql_find_rows <1>:                   mysql-find-rows.    (line    6)
* mysql_find_rows:                       programs-overview.  (line  198)
* mysql_find_rows, help option:          mysql-find-rows.    (line   28)
* mysql_find_rows, regexp option:        mysql-find-rows.    (line   32)
* mysql_find_rows, rows option:          mysql-find-rows.    (line   36)
* mysql_find_rows, skip-use-db option:   mysql-find-rows.    (line   40)
* mysql_find_rows, start_row option:     mysql-find-rows.    (line   44)
* mysql_fix_extensions <1>:              mysql-fix-extensions.
                                                             (line    6)
* mysql_fix_extensions:                  programs-overview.  (line  204)
* mysql_free_result():                   mysql-free-result.  (line    6)
* mysql_get_character_set_info():        mysql-get-character-set-info.
                                                             (line    6)
* mysql_get_client_info():               mysql-get-client-info.
                                                             (line    6)
* mysql_get_client_version():            mysql-get-client-version.
                                                             (line    6)
* mysql_get_host_info():                 mysql-get-host-info.
                                                             (line    6)
* mysql_get_proto_info():                mysql-get-proto-info.
                                                             (line    6)
* mysql_get_server_info():               mysql-get-server-info.
                                                             (line    6)
* mysql_get_server_version():            mysql-get-server-version.
                                                             (line    6)
* mysql_get_ssl_cipher():                mysql-get-ssl-cipher.
                                                             (line    6)
* MYSQL_GROUP_SUFFIX environment variable: environment-variables.
                                                             (line   18)
* mysql_hex_string():                    mysql-hex-string.   (line    6)
* MYSQL_HISTFILE environment variable <1>: mysql-logging.    (line    6)
* MYSQL_HISTFILE environment variable:   environment-variables.
                                                             (line   18)
* MYSQL_HOME environment variable:       environment-variables.
                                                             (line   18)
* MYSQL_HOST environment variable <1>:   connecting.         (line  238)
* MYSQL_HOST environment variable:       environment-variables.
                                                             (line   18)
* mysql_info() <1>:                      mysql-info.         (line    6)
* mysql_info() <2>:                      update.             (line   95)
* mysql_info() <3>:                      load-data.          (line  681)
* mysql_info() <4>:                      insert.             (line  202)
* mysql_info():                          alter-table.        (line  575)
* mysql_init():                          mysql-init.         (line    6)
* mysql_insert_id() <1>:                 mysql-insert-id.    (line    6)
* mysql_insert_id() <2>:                 insert.             (line  206)
* mysql_insert_id():                     ansi-diff-transactions.
                                                             (line  130)
* mysql_install_db <1>:                  mysql-install-db.   (line    6)
* mysql_install_db <2>:                  programs-overview.  (line   72)
* mysql_install_db:                      mysql-install-db-problems.
                                                             (line    6)
* mysql_install_db, basedir option:      mysql-install-db.   (line   53)
* mysql_install_db, datadir option:      mysql-install-db.   (line   57)
* mysql_install_db, force option:        mysql-install-db.   (line   61)
* mysql_install_db, ldata option:        mysql-install-db.   (line   57)
* mysql_install_db, rpm option:          mysql-install-db.   (line   67)
* mysql_install_db, skip-name-resolve option: mysql-install-db.
                                                             (line   73)
* mysql_install_db, srcdir option:       mysql-install-db.   (line   78)
* mysql_install_db, user option:         mysql-install-db.   (line   85)
* mysql_install_db, verbose option:      mysql-install-db.   (line   94)
* mysql_install_db, windows option:      mysql-install-db.   (line   98)
* mysql_kill():                          mysql-kill.         (line    6)
* mysql_library_end():                   mysql-library-end.  (line    6)
* mysql_library_init():                  mysql-library-init. (line    6)
* mysql_list_dbs():                      mysql-list-dbs.     (line    6)
* mysql_list_fields():                   mysql-list-fields.  (line    6)
* mysql_list_processes():                mysql-list-processes.
                                                             (line    6)
* mysql_list_tables():                   mysql-list-tables.  (line    6)
* mysql_load_plugin():                   mysql-load-plugin.  (line    6)
* mysql_load_plugin_v():                 mysql-load-plugin-v.
                                                             (line    6)
* MYSQL_MAINTAINER_MODE option, CMake:   source-configuration-options.
                                                             (line  483)
* mysql_more_results():                  mysql-more-results. (line    6)
* mysql_next_result():                   mysql-next-result.  (line    6)
* mysql_num_fields():                    mysql-num-fields.   (line    6)
* mysql_num_rows():                      mysql-num-rows.     (line    6)
* mysql_options():                       mysql-options.      (line    6)
* mysql_ping():                          mysql-ping.         (line    6)
* mysql_plugin <1>:                      mysql-plugin.       (line    6)
* mysql_plugin:                          programs-overview.  (line   80)
* mysql_plugin, basedir option:          mysql-plugin.       (line   98)
* mysql_plugin, datadir option:          mysql-plugin.       (line  102)
* mysql_plugin, help option:             mysql-plugin.       (line   94)
* mysql_plugin, my-print-defaults option: mysql-plugin.      (line  106)
* mysql_plugin, mysqld option:           mysql-plugin.       (line  111)
* mysql_plugin, no-defaults option:      mysql-plugin.       (line  115)
* mysql_plugin, plugin-dir option:       mysql-plugin.       (line  125)
* mysql_plugin, plugin-ini option:       mysql-plugin.       (line  129)
* mysql_plugin, print-defaults option:   mysql-plugin.       (line  137)
* mysql_plugin, verbose option:          mysql-plugin.       (line  149)
* mysql_plugin, version option:          mysql-plugin.       (line  155)
* mysql_plugin_options():                mysql-plugin-options.
                                                             (line    6)
* MYSQL_PROJECT_NAME option, CMake:      source-configuration-options.
                                                             (line  489)
* MYSQL_PS1 environment variable:        environment-variables.
                                                             (line   18)
* MYSQL_PWD environment variable <1>:    connecting.         (line  238)
* MYSQL_PWD environment variable <2>:    programs-overview.  (line  276)
* MYSQL_PWD environment variable:        environment-variables.
                                                             (line   18)
* mysql_query() <1>:                     c-api-problems.     (line   12)
* mysql_query():                         mysql-query.        (line    6)
* mysql_real_connect():                  mysql-real-connect. (line    6)
* mysql_real_escape_string() <1>:        mysql-real-escape-string.
                                                             (line    6)
* mysql_real_escape_string() <2>:        string-functions.   (line  544)
* mysql_real_escape_string():            string-literals.    (line  141)
* mysql_real_query():                    mysql-real-query.   (line    6)
* mysql_refresh():                       mysql-refresh.      (line    6)
* mysql_reload():                        mysql-reload.       (line    6)
* MYSQL_RES C type:                      c-api-data-structures.
                                                             (line   17)
* mysql_rollback():                      mysql-rollback.     (line    6)
* MYSQL_ROW C type:                      c-api-data-structures.
                                                             (line   25)
* mysql_row_seek():                      mysql-row-seek.     (line    6)
* mysql_row_tell():                      mysql-row-tell.     (line    6)
* mysql_secure_installation <1>:         mysql-secure-installation.
                                                             (line    6)
* mysql_secure_installation:             programs-overview.  (line   85)
* mysql_select_db():                     mysql-select-db.    (line    6)
* MYSQL_SERVER_AUTH_INFO plugin structure: writing-authentication-plugins-server-side.
                                                             (line   72)
* mysql_server_end():                    mysql-server-end.   (line    6)
* mysql_server_init():                   mysql-server-init.  (line    6)
* mysql_set_character_set():             mysql-set-character-set.
                                                             (line    6)
* mysql_set_local_infile_default():      mysql-set-local-infile-default.
                                                             (line    6)
* mysql_set_server_option():             mysql-set-server-option.
                                                             (line    6)
* mysql_setpermission <1>:               mysql-setpermission.
                                                             (line    6)
* mysql_setpermission:                   programs-overview.  (line  211)
* mysql_setpermission, help option:      mysql-setpermission.
                                                             (line   29)
* mysql_setpermission, host option:      mysql-setpermission.
                                                             (line   33)
* mysql_setpermission, password option:  mysql-setpermission.
                                                             (line   37)
* mysql_setpermission, port option:      mysql-setpermission.
                                                             (line   47)
* mysql_setpermission, socket option:    mysql-setpermission.
                                                             (line   51)
* mysql_setpermission, user option:      mysql-setpermission.
                                                             (line   55)
* mysql_shutdown():                      mysql-shutdown.     (line    6)
* mysql_sqlstate():                      mysql-sqlstate.     (line    6)
* mysql_ssl_set():                       mysql-ssl-set.      (line    6)
* mysql_stat():                          mysql-stat.         (line    6)
* MYSQL_STMT C type:                     c-api-prepared-statement-data-structures.
                                                             (line   34)
* mysql_stmt_affected_rows():            mysql-stmt-affected-rows.
                                                             (line    6)
* mysql_stmt_attr_get():                 mysql-stmt-attr-get.
                                                             (line    6)
* mysql_stmt_attr_set():                 mysql-stmt-attr-set.
                                                             (line    6)
* mysql_stmt_bind_param():               mysql-stmt-bind-param.
                                                             (line    6)
* mysql_stmt_bind_result():              mysql-stmt-bind-result.
                                                             (line    6)
* mysql_stmt_close():                    mysql-stmt-close.   (line    6)
* mysql_stmt_data_seek():                mysql-stmt-data-seek.
                                                             (line    6)
* mysql_stmt_errno():                    mysql-stmt-errno.   (line    6)
* mysql_stmt_error():                    mysql-stmt-error.   (line    6)
* mysql_stmt_execute():                  mysql-stmt-execute. (line    6)
* mysql_stmt_fetch():                    mysql-stmt-fetch.   (line    6)
* mysql_stmt_fetch_column():             mysql-stmt-fetch-column.
                                                             (line    6)
* mysql_stmt_field_count():              mysql-stmt-field-count.
                                                             (line    6)
* mysql_stmt_free_result():              mysql-stmt-free-result.
                                                             (line    6)
* mysql_stmt_init():                     mysql-stmt-init.    (line    6)
* mysql_stmt_insert_id():                mysql-stmt-insert-id.
                                                             (line    6)
* mysql_stmt_next_result():              mysql-stmt-next-result.
                                                             (line    6)
* mysql_stmt_num_rows():                 mysql-stmt-num-rows.
                                                             (line    6)
* mysql_stmt_param_count():              mysql-stmt-param-count.
                                                             (line    6)
* mysql_stmt_param_metadata():           mysql-stmt-param-metadata.
                                                             (line    6)
* mysql_stmt_prepare():                  mysql-stmt-prepare. (line    6)
* mysql_stmt_reset():                    mysql-stmt-reset.   (line    6)
* mysql_stmt_result_metadata:            mysql-stmt-result-metadata.
                                                             (line    6)
* mysql_stmt_row_seek():                 mysql-stmt-row-seek.
                                                             (line    6)
* mysql_stmt_row_tell():                 mysql-stmt-row-tell.
                                                             (line    6)
* mysql_stmt_send_long_data():           mysql-stmt-send-long-data.
                                                             (line    6)
* mysql_stmt_sqlstate():                 mysql-stmt-sqlstate.
                                                             (line    6)
* mysql_stmt_store_result():             mysql-stmt-store-result.
                                                             (line    6)
* mysql_store_result() <1>:              c-api-problems.     (line   12)
* mysql_store_result():                  mysql-store-result. (line    6)
* MYSQL_TCP_PORT environment variable <1>: multiple-server-clients.
                                                             (line   27)
* MYSQL_TCP_PORT environment variable <2>: multiple-unix-servers.
                                                             (line   69)
* MYSQL_TCP_PORT environment variable <3>: programs-overview.
                                                             (line  276)
* MYSQL_TCP_PORT environment variable:   environment-variables.
                                                             (line   18)
* MYSQL_TCP_PORT option, CMake:          source-configuration-options.
                                                             (line  494)
* mysql_thread_end():                    mysql-thread-end.   (line    6)
* mysql_thread_id():                     mysql-thread-id.    (line    6)
* mysql_thread_init():                   mysql-thread-init.  (line    6)
* mysql_thread_safe():                   mysql-thread-safe.  (line    6)
* MYSQL_TIME C type:                     c-api-prepared-statement-data-structures.
                                                             (line  245)
* mysql_tzinfo_to_sql <1>:               mysql-tzinfo-to-sql.
                                                             (line    6)
* mysql_tzinfo_to_sql:                   programs-overview.  (line   90)
* MYSQL_UNIX_ADDR option, CMake:         source-configuration-options.
                                                             (line  501)
* MYSQL_UNIX_PORT environment variable <1>: multiple-server-clients.
                                                             (line   27)
* MYSQL_UNIX_PORT environment variable <2>: multiple-unix-servers.
                                                             (line   69)
* MYSQL_UNIX_PORT environment variable <3>: programs-overview.
                                                             (line  276)
* MYSQL_UNIX_PORT environment variable <4>: environment-variables.
                                                             (line   18)
* MYSQL_UNIX_PORT environment variable:  mysql-install-db-problems.
                                                             (line   84)
* mysql_upgrade <1>:                     access-denied.      (line   83)
* mysql_upgrade <2>:                     mysql-upgrade.      (line    6)
* mysql_upgrade:                         programs-overview.  (line   97)
* mysql_upgrade, basedir option:         mysql-upgrade.      (line  162)
* mysql_upgrade, datadir option:         mysql-upgrade.      (line  168)
* mysql_upgrade, debug-check option:     mysql-upgrade.      (line  173)
* mysql_upgrade, debug-info option:      mysql-upgrade.      (line  177)
* mysql_upgrade, default-auth option:    mysql-upgrade.      (line  182)
* mysql_upgrade, force option:           mysql-upgrade.      (line  189)
* mysql_upgrade, help option:            mysql-upgrade.      (line  158)
* mysql_upgrade, mysql_upgrade_info file: mysql-upgrade.     (line   77)
* mysql_upgrade, plugin-dir option:      mysql-upgrade.      (line  196)
* mysql_upgrade, tmpdir option:          mysql-upgrade.      (line  206)
* mysql_upgrade, upgrade-system-tables option: mysql-upgrade.
                                                             (line  210)
* mysql_upgrade, user option:            mysql-upgrade.      (line  214)
* mysql_upgrade, verbose option:         mysql-upgrade.      (line  219)
* mysql_upgrade, version-check option:   mysql-upgrade.      (line  223)
* mysql_upgrade, write-binlog option:    mysql-upgrade.      (line  232)
* mysql_upgrade_info file, mysql_upgrade: mysql-upgrade.     (line   77)
* mysql_use_result():                    mysql-use-result.   (line    6)
* mysql_waitpid <1>:                     mysql-waitpid.      (line    6)
* mysql_waitpid:                         programs-overview.  (line  216)
* mysql_waitpid, help option:            mysql-waitpid.      (line   27)
* mysql_waitpid, verbose option:         mysql-waitpid.      (line   31)
* mysql_waitpid, version option:         mysql-waitpid.      (line   36)
* mysql_warning_count():                 mysql-warning-count.
                                                             (line    6)
* mysql_zap <1>:                         mysql-zap.          (line    6)
* mysql_zap:                             programs-overview.  (line  221)
* mysqlaccess <1>:                       mysqlaccess.        (line    6)
* mysqlaccess:                           programs-overview.  (line  172)
* mysqlaccess, brief option:             mysqlaccess.        (line   71)
* mysqlaccess, commit option:            mysqlaccess.        (line   75)
* mysqlaccess, copy option:              mysqlaccess.        (line   82)
* mysqlaccess, db option:                mysqlaccess.        (line   86)
* mysqlaccess, debug option:             mysqlaccess.        (line   90)
* mysqlaccess, help option:              mysqlaccess.        (line   67)
* mysqlaccess, host option:              mysqlaccess.        (line   94)
* mysqlaccess, howto option:             mysqlaccess.        (line   98)
* mysqlaccess, old_server option:        mysqlaccess.        (line  103)
* mysqlaccess, password option:          mysqlaccess.        (line  108)
* mysqlaccess, plan option:              mysqlaccess.        (line  117)
* mysqlaccess, preview option:           mysqlaccess.        (line  121)
* mysqlaccess, relnotes option:          mysqlaccess.        (line  126)
* mysqlaccess, rhost option:             mysqlaccess.        (line  130)
* mysqlaccess, rollback option:          mysqlaccess.        (line  134)
* mysqlaccess, spassword option:         mysqlaccess.        (line  138)
* mysqlaccess, superuser option:         mysqlaccess.        (line  148)
* mysqlaccess, table option:             mysqlaccess.        (line  152)
* mysqlaccess, user option:              mysqlaccess.        (line  156)
* mysqlaccess, version option:           mysqlaccess.        (line  160)
* mysqladmin <1>:                        kill.               (line    6)
* mysqladmin <2>:                        flush.              (line    6)
* mysqladmin <3>:                        show-variables.     (line    9)
* mysqladmin <4>:                        show-status.        (line    9)
* mysqladmin <5>:                        drop-database.      (line   54)
* mysqladmin <6>:                        create-database.    (line   46)
* mysqladmin <7>:                        mysqladmin.         (line    6)
* mysqladmin:                            programs-overview.  (line  111)
* mysqladmin command options:            mysqladmin.         (line  221)
* mysqladmin option, mysqld_multi:       mysqld-multi.       (line  104)
* mysqladmin, bind-address option:       mysqladmin.         (line  314)
* mysqladmin, character-sets-dir option: mysqladmin.         (line  324)
* mysqladmin, compress option:           mysqladmin.         (line  329)
* mysqladmin, count option:              mysqladmin.         (line  334)
* mysqladmin, debug option:              mysqladmin.         (line  339)
* mysqladmin, debug-check option:        mysqladmin.         (line  345)
* mysqladmin, debug-info option:         mysqladmin.         (line  349)
* mysqladmin, default-auth option:       mysqladmin.         (line  354)
* mysqladmin, default-character-set option: mysqladmin.      (line  361)
* mysqladmin, enable-cleartext-plugin option: mysqladmin.    (line  366)
* mysqladmin, force option:              mysqladmin.         (line  372)
* mysqladmin, help option:               mysqladmin.         (line  310)
* mysqladmin, host option:               mysqladmin.         (line  377)
* mysqladmin, no-beep option:            mysqladmin.         (line  381)
* mysqladmin, password option:           mysqladmin.         (line  386)
* mysqladmin, pipe option:               mysqladmin.         (line  398)
* mysqladmin, plugin-dir option:         mysqladmin.         (line  403)
* mysqladmin, port option:               mysqladmin.         (line  412)
* mysqladmin, protocol option:           mysqladmin.         (line  416)
* mysqladmin, relative option:           mysqladmin.         (line  423)
* mysqladmin, silent option:             mysqladmin.         (line  429)
* mysqladmin, sleep option:              mysqladmin.         (line  433)
* mysqladmin, socket option:             mysqladmin.         (line  440)
* mysqladmin, SSL options:               mysqladmin.         (line  445)
* mysqladmin, user option:               mysqladmin.         (line  451)
* mysqladmin, verbose option:            mysqladmin.         (line  455)
* mysqladmin, version option:            mysqladmin.         (line  459)
* mysqladmin, vertical option:           mysqladmin.         (line  463)
* mysqladmin, wait option:               mysqladmin.         (line  468)
* mysqlbackup command:                   glossary.           (line 1980)
* mysqlbinlog <1>:                       mysqlbinlog.        (line   11)
* mysqlbinlog:                           programs-overview.  (line  177)
* mysqlbinlog, base64-output option:     mysqlbinlog.        (line  170)
* mysqlbinlog, bind-address option:      mysqlbinlog.        (line  217)
* mysqlbinlog, character-sets-dir option: mysqlbinlog.       (line  225)
* mysqlbinlog, database option:          mysqlbinlog.        (line  230)
* mysqlbinlog, debug option:             mysqlbinlog.        (line  316)
* mysqlbinlog, debug-check option:       mysqlbinlog.        (line  322)
* mysqlbinlog, debug-info option:        mysqlbinlog.        (line  326)
* mysqlbinlog, default-auth option:      mysqlbinlog.        (line  331)
* mysqlbinlog, disable-log-bin option:   mysqlbinlog.        (line  338)
* mysqlbinlog, force-if-open option:     mysqlbinlog.        (line  352)
* mysqlbinlog, force-read option:        mysqlbinlog.        (line  357)
* mysqlbinlog, help option:              mysqlbinlog.        (line  166)
* mysqlbinlog, hexdump option:           mysqlbinlog.        (line  364)
* mysqlbinlog, host option:              mysqlbinlog.        (line  370)
* mysqlbinlog, local-load option:        mysqlbinlog.        (line  374)
* mysqlbinlog, offset option:            mysqlbinlog.        (line  384)
* mysqlbinlog, password option:          mysqlbinlog.        (line  388)
* mysqlbinlog, plugin-dir option:        mysqlbinlog.        (line  400)
* mysqlbinlog, port option:              mysqlbinlog.        (line  410)
* mysqlbinlog, position option:          mysqlbinlog.        (line  414)
* mysqlbinlog, protocol option:          mysqlbinlog.        (line  419)
* mysqlbinlog, read-from-remote-server option: mysqlbinlog.  (line  426)
* mysqlbinlog, result-file option:       mysqlbinlog.        (line  437)
* mysqlbinlog, server-id option:         mysqlbinlog.        (line  441)
* mysqlbinlog, server-id-bits option:    mysqlbinlog.        (line  446)
* mysqlbinlog, set-charset option:       mysqlbinlog.        (line  459)
* mysqlbinlog, short-form option:        mysqlbinlog.        (line  464)
* mysqlbinlog, socket option:            mysqlbinlog.        (line  470)
* mysqlbinlog, start-datetime option:    mysqlbinlog.        (line  475)
* mysqlbinlog, start-position option:    mysqlbinlog.        (line  489)
* mysqlbinlog, stop-datetime option:     mysqlbinlog.        (line  498)
* mysqlbinlog, stop-position option:     mysqlbinlog.        (line  508)
* mysqlbinlog, to-last-log option:       mysqlbinlog.        (line  517)
* mysqlbinlog, user option:              mysqlbinlog.        (line  525)
* mysqlbinlog, verbose option:           mysqlbinlog.        (line  529)
* mysqlbinlog, version option:           mysqlbinlog.        (line  539)
* mysqlbug:                              mysqlbug.           (line    6)
* MySqlBulkLoader class:                 connector-net-programming-bulk-loader.
                                                             (line    6)
* mysqlcheck <1>:                        mysqlcheck.         (line    6)
* mysqlcheck:                            programs-overview.  (line  119)
* mysqlcheck, all-databases option:      mysqlcheck.         (line  202)
* mysqlcheck, all-in-1 option:           mysqlcheck.         (line  208)
* mysqlcheck, analyze option:            mysqlcheck.         (line  214)
* mysqlcheck, auto-repair option:        mysqlcheck.         (line  218)
* mysqlcheck, bind-address option:       mysqlcheck.         (line  223)
* mysqlcheck, character-sets-dir option: mysqlcheck.         (line  233)
* mysqlcheck, check option:              mysqlcheck.         (line  238)
* mysqlcheck, check-only-changed option: mysqlcheck.         (line  242)
* mysqlcheck, check-upgrade option:      mysqlcheck.         (line  247)
* mysqlcheck, compress option:           mysqlcheck.         (line  254)
* mysqlcheck, databases option:          mysqlcheck.         (line  259)
* mysqlcheck, debug option:              mysqlcheck.         (line  267)
* mysqlcheck, debug-check option:        mysqlcheck.         (line  272)
* mysqlcheck, debug-info option:         mysqlcheck.         (line  276)
* mysqlcheck, default-auth option:       mysqlcheck.         (line  295)
* mysqlcheck, default-character-set option: mysqlcheck.      (line  281)
* mysqlcheck, extended option:           mysqlcheck.         (line  286)
* mysqlcheck, fast option:               mysqlcheck.         (line  302)
* mysqlcheck, fix-db-names option:       mysqlcheck.         (line  306)
* mysqlcheck, fix-table-names option:    mysqlcheck.         (line  311)
* mysqlcheck, force option:              mysqlcheck.         (line  316)
* mysqlcheck, help option:               mysqlcheck.         (line  198)
* mysqlcheck, host option:               mysqlcheck.         (line  320)
* mysqlcheck, medium-check option:       mysqlcheck.         (line  324)
* mysqlcheck, optimize option:           mysqlcheck.         (line  330)
* mysqlcheck, password option:           mysqlcheck.         (line  334)
* mysqlcheck, pipe option:               mysqlcheck.         (line  346)
* mysqlcheck, plugin-dir option:         mysqlcheck.         (line  351)
* mysqlcheck, port option:               mysqlcheck.         (line  360)
* mysqlcheck, protocol option:           mysqlcheck.         (line  364)
* mysqlcheck, quick option:              mysqlcheck.         (line  371)
* mysqlcheck, repair option:             mysqlcheck.         (line  380)
* mysqlcheck, silent option:             mysqlcheck.         (line  385)
* mysqlcheck, socket option:             mysqlcheck.         (line  389)
* mysqlcheck, SSL options:               mysqlcheck.         (line  394)
* mysqlcheck, tables option:             mysqlcheck.         (line  400)
* mysqlcheck, use-frm option:            mysqlcheck.         (line  405)
* mysqlcheck, user option:               mysqlcheck.         (line  411)
* mysqlcheck, verbose option:            mysqlcheck.         (line  415)
* mysqlcheck, version option:            mysqlcheck.         (line  420)
* mysqlcheck, write-binlog option:       mysqlcheck.         (line  424)
* MySqlClient namespace:                 connector-net-ref-mysqlclient.
                                                             (line   17)
* MySQLCommand class:                    connector-net-programming-mysqlcommand.
                                                             (line    6)
* MySqlCommand class:                    connector-net-tutorials-sql-command.
                                                             (line    6)
* mysqlcppconn-static.lib:               connector-cpp-apps-windows-visual-studio.
                                                             (line    6)
* mysqlcppconn.dll:                      connector-cpp-apps-windows-visual-studio.
                                                             (line    6)
* mysqld <1>:                            glossary.           (line 1986)
* mysqld:                                programs-overview.  (line   38)
* mysqld (MySQL Cluster):                mysql-cluster-programs.
                                                             (line   34)
* mysqld option, malloc-lib:             mysqld-safe.        (line  151)
* mysqld option, mysql_plugin:           mysql-plugin.       (line  111)
* mysqld option, mysqld_multi:           mysqld-multi.       (line  109)
* mysqld option, mysqld_safe:            mysqld-safe.        (line  200)
* mysqld options:                        server-parameters.  (line   11)
* mysqld options and variables, MySQL Cluster: mysql-cluster-options-variables.
                                                             (line   13)
* mysqld server, buffer sizes:           server-parameters.  (line    6)
* mysqld, abort-slave-event-count option: replication-options-slave.
                                                             (line   34)
* mysqld, allow-suspicious-udfs option:  server-options.     (line   84)
* mysqld, ansi option:                   server-options.     (line  103)
* mysqld, as MySQL Cluster process <1>:  mysql-cluster-mysqld.
                                                             (line    6)
* mysqld, as MySQL Cluster process:      mysql-cluster-program-options-mysqld.
                                                             (line    6)
* mysqld, audit-log option:              audit-log-plugin-options-variables.
                                                             (line   15)
* mysqld, basedir option:                server-options.     (line  116)
* mysqld, big-tables option:             server-options.     (line  136)
* mysqld, bind-address option:           server-options.     (line  159)
* mysqld, binlog-do-db option:           replication-options-binary-log.
                                                             (line  200)
* mysqld, binlog-format option:          server-options.     (line  216)
* mysqld, binlog-ignore-db option:       replication-options-binary-log.
                                                             (line  325)
* mysqld, binlog-row-event-max-size option: replication-options-binary-log.
                                                             (line   20)
* mysqld, bootstrap option:              server-options.     (line  251)
* mysqld, character-set-client-handshake option: server-options.
                                                             (line  282)
* mysqld, character-set-filesystem option: server-options.   (line  299)
* mysqld, character-set-server option:   server-options.     (line  318)
* mysqld, character-sets-dir option:     server-options.     (line  263)
* mysqld, chroot option:                 server-options.     (line  339)
* mysqld, collation-server option:       server-options.     (line  359)
* mysqld, command options:               server-options.     (line    6)
* mysqld, console option:                server-options.     (line  378)
* mysqld, core-file option:              server-options.     (line  396)
* mysqld, datadir option:                server-options.     (line  425)
* mysqld, debug option:                  server-options.     (line  444)
* mysqld, debug-sync-timeout option:     server-options.     (line  479)
* mysqld, default-character-set option:  server-options.     (line  504)
* mysqld, default-collation option:      server-options.     (line  523)
* mysqld, default-storage-engine option: server-options.     (line  540)
* mysqld, default-time-zone option:      server-options.     (line  572)
* mysqld, delay-key-write option <1>:    myisam-start.       (line   45)
* mysqld, delay-key-write option:        server-options.     (line  588)
* mysqld, des-key-file option:           server-options.     (line  621)
* mysqld, disconnect-slave-event-count option: replication-options-slave.
                                                             (line   61)
* mysqld, enable-named-pipe option:      server-options.     (line  637)
* mysqld, enable-pstack option:          server-options.     (line  649)
* mysqld, event-scheduler option:        server-options.     (line  689)
* mysqld, exit-info option:              server-options.     (line  712)
* mysqld, external-locking option:       server-options.     (line  729)
* mysqld, flush option:                  server-options.     (line  754)
* mysqld, gdb option:                    server-options.     (line  775)
* mysqld, general-log option:            server-options.     (line  791)
* mysqld, help option:                   server-options.     (line   72)
* mysqld, ignore-builtin-innodb option:  innodb-parameters.  (line  147)
* mysqld, init-file option:              server-options.     (line  812)
* mysqld, innodb option:                 innodb-parameters.  (line  170)
* mysqld, innodb-status-file option:     innodb-parameters.  (line  183)
* mysqld, install option:                server-options.     (line  836)
* mysqld, install-manual option:         server-options.     (line  853)
* mysqld, language option:               server-options.     (line  871)
* mysqld, large-pages option:            server-options.     (line  901)
* mysqld, lc-messages option:            server-options.     (line  932)
* mysqld, lc-messages-dir option:        server-options.     (line  953)
* mysqld, log option:                    server-options.     (line  973)
* mysqld, log-bin option:                replication-options-binary-log.
                                                             (line   49)
* mysqld, log-bin-index option:          replication-options-binary-log.
                                                             (line   88)
* mysqld, log-bin-trust-function-creators option: replication-options-binary-log.
                                                             (line  104)
* mysqld, log-bin-use-v1-row-events option: replication-options-binary-log.
                                                             (line  127)
* mysqld, log-error option:              server-options.     (line 1006)
* mysqld, log-isam option:               server-options.     (line 1027)
* mysqld, log-long-format option:        server-options.     (line 1042)
* mysqld, log-output option:             server-options.     (line 1061)
* mysqld, log-queries-not-using-indexes option: server-options.
                                                             (line 1097)
* mysqld, log-short-format option <1>:   replication-options-binary-log.
                                                             (line  177)
* mysqld, log-short-format option:       server-options.     (line 1120)
* mysqld, log-slave-updates option:      replication-options-slave.
                                                             (line   76)
* mysqld, log-slow-admin-statements option: server-options.  (line 1135)
* mysqld, log-slow-queries option:       server-options.     (line 1154)
* mysqld, log-slow-slave-statements option: replication-options-slave.
                                                             (line  114)
* mysqld, log-tc option:                 server-options.     (line 1187)
* mysqld, log-tc-size option:            server-options.     (line 1206)
* mysqld, log-warnings option <1>:       replication-options-slave.
                                                             (line  130)
* mysqld, log-warnings option:           server-options.     (line 1229)
* mysqld, low-priority-updates option:   server-options.     (line 1277)
* mysqld, master-info-file option:       replication-options-slave.
                                                             (line  173)
* mysqld, master-retry-count option:     replication-options-slave.
                                                             (line  191)
* mysqld, max-binlog-dump-events option: replication-options-binary-log.
                                                             (line  403)
* mysqld, max-relay-log-size option:     replication-options-slave.
                                                             (line  255)
* mysqld, memlock option:                server-options.     (line 1333)
* mysqld, min-examined-row-limit option: server-options.     (line 1303)
* mysqld, myisam-block-size option:      server-options.     (line 1382)
* mysqld, myisam-recover option:         server-options.     (line 1399)
* mysqld, myisam-recover-options option <1>: myisam-start.   (line   41)
* mysqld, myisam-recover-options option: server-options.     (line 1405)
* mysqld, MySQL server <1>:              mysqld-server.      (line   21)
* mysqld, MySQL server:                  mysqld.             (line    6)
* mysqld, ndb-batch-size option:         mysql-cluster-program-options-mysqld.
                                                             (line   23)
* mysqld, ndb-blob-read-batch-bytes option: mysql-cluster-program-options-mysqld.
                                                             (line  106)
* mysqld, ndb-blob-write-batch-bytes option: mysql-cluster-program-options-mysqld.
                                                             (line  144)
* mysqld, ndb-cluster-connection-pool option: mysql-cluster-program-options-mysqld.
                                                             (line   44)
* mysqld, ndb-connectstring option:      mysql-cluster-program-options-mysqld.
                                                             (line  183)
* mysqld, ndb-log-apply-status:          mysql-cluster-program-options-mysqld.
                                                             (line  287)
* mysqld, ndb-log-empty-epochs:          mysql-cluster-program-options-mysqld.
                                                             (line  422)
* mysqld, ndb-log-orig:                  mysql-cluster-program-options-mysqld.
                                                             (line  324)
* mysqld, ndb-log-transaction-id:        mysql-cluster-program-options-mysqld.
                                                             (line  349)
* mysqld, ndb-nodeid:                    mysql-cluster-program-options-mysqld.
                                                             (line  383)
* mysqld, ndbcluster option:             mysql-cluster-program-options-mysqld.
                                                             (line  267)
* mysqld, old-alter-table option:        server-options.     (line 1469)
* mysqld, old-style-user-limits option:  server-options.     (line 1494)
* mysqld, one-thread option:             server-options.     (line 1511)
* mysqld, open-files-limit option:       server-options.     (line 1526)
* mysqld, partition option:              server-options.     (line 1559)
* mysqld, pid-file option:               server-options.     (line 1575)
* mysqld, plugin option prefix:          server-options.     (line 1597)
* mysqld, plugin-load option:            server-options.     (line 1622)
* mysqld, port option:                   server-options.     (line 1676)
* mysqld, port-open-timeout option:      server-options.     (line 1699)
* mysqld, read-only option:              replication-options-slave.
                                                             (line  277)
* mysqld, relay-log option:              replication-options-slave.
                                                             (line  299)
* mysqld, relay-log-index option:        replication-options-slave.
                                                             (line  357)
* mysqld, relay-log-info-file option:    replication-options-slave.
                                                             (line  392)
* mysqld, relay-log-purge option:        replication-options-slave.
                                                             (line  410)
* mysqld, relay-log-recovery option:     replication-options-slave.
                                                             (line  431)
* mysqld, relay-log-space-limit option:  replication-options-slave.
                                                             (line  450)
* mysqld, remove option:                 server-options.     (line 1718)
* mysqld, replicate-do-db option:        replication-options-slave.
                                                             (line  495)
* mysqld, replicate-do-table option:     replication-options-slave.
                                                             (line  679)
* mysqld, replicate-ignore-db option:    replication-options-slave.
                                                             (line  610)
* mysqld, replicate-ignore-table option: replication-options-slave.
                                                             (line  701)
* mysqld, replicate-rewrite-db option:   replication-options-slave.
                                                             (line  724)
* mysqld, replicate-same-server-id option: replication-options-slave.
                                                             (line  773)
* mysqld, replicate-wild-do-table option: replication-options-slave.
                                                             (line  797)
* mysqld, replicate-wild-ignore-table option: replication-options-slave.
                                                             (line  844)
* mysqld, report-host option:            replication-options-slave.
                                                             (line  870)
* mysqld, report-password option:        replication-options-slave.
                                                             (line  895)
* mysqld, report-port option:            replication-options-slave.
                                                             (line  920)
* mysqld, report-user option:            replication-options-slave.
                                                             (line  952)
* mysqld, role in MySQL Cluster:         mysql-cluster-basics.
                                                             (line    6)
* mysqld, safe-mode option:              server-options.     (line 1729)
* mysqld, safe-show-database option:     server-options.     (line 1741)
* mysqld, safe-user-create option:       server-options.     (line 1764)
* mysqld, secure-auth option:            server-options.     (line 1789)
* mysqld, secure-file-priv option:       server-options.     (line 1823)
* mysqld, server-id option:              replication-options.
                                                             (line   21)
* mysqld, server-id-bits option:         mysql-cluster-program-options-mysqld.
                                                             (line  453)
* mysqld, shared-memory option:          server-options.     (line 1843)
* mysqld, shared-memory-base-name option: server-options.    (line 1856)
* mysqld, show-slave-auth-info option:   replication-options-slave.
                                                             (line  977)
* mysqld, skip-concurrent-insert option: server-options.     (line 1870)
* mysqld, skip-event-scheduler option:   server-options.     (line 1876)
* mysqld, skip-grant-tables option:      server-options.     (line 1890)
* mysqld, skip-host-cache option:        server-options.     (line 1910)
* mysqld, skip-innodb option <1>:        innodb-parameters.  (line  204)
* mysqld, skip-innodb option:            server-options.     (line 1916)
* mysqld, skip-name-resolve option:      server-options.     (line 1923)
* mysqld, skip-ndbcluster option:        mysql-cluster-program-options-mysqld.
                                                             (line  497)
* mysqld, skip-networking option:        server-options.     (line 1930)
* mysqld, skip-partition option:         server-options.     (line 1938)
* mysqld, skip-safemalloc option:        server-options.     (line 2026)
* mysqld, skip-show-database option:     server-options.     (line 2043)
* mysqld, skip-slave-start option:       replication-options-slave.
                                                             (line  994)
* mysqld, skip-stack-trace option:       server-options.     (line 2059)
* mysqld, skip-symbolic-links option:    server-options.     (line 2002)
* mysqld, skip-thread-priority option:   server-options.     (line 2072)
* mysqld, slave-load-tmpdir option:      replication-options-slave.
                                                             (line 1030)
* mysqld, slave-max-allowed-packet:      replication-options-slave.
                                                             (line  221)
* mysqld, slave-net-timeout option:      replication-options-slave.
                                                             (line 1067)
* mysqld, slave-skip-errors option:      replication-options-slave.
                                                             (line 1093)
* mysqld, slave_compressed_protocol option: replication-options-slave.
                                                             (line 1010)
* mysqld, slow-query-log option:         server-options.     (line 2084)
* mysqld, slow-start-timeout option:     server-options.     (line 2105)
* mysqld, socket option:                 server-options.     (line 2126)
* mysqld, sporadic-binlog-dump-fail option: replication-options-binary-log.
                                                             (line  418)
* mysqld, sql-mode option:               server-options.     (line 2152)
* mysqld, SSL options:                   server-options.     (line 1963)
* mysqld, standalone option:             server-options.     (line 1969)
* mysqld, starting:                      changing-mysql-user.
                                                             (line    6)
* mysqld, super-large-pages option:      server-options.     (line 1981)
* mysqld, symbolic-links option:         server-options.     (line 2002)
* mysqld, sysdate-is-now option:         server-options.     (line 2200)
* mysqld, tc-heuristic-recover option:   server-options.     (line 2220)
* mysqld, temp-pool option:              server-options.     (line 2236)
* mysqld, tmpdir option:                 server-options.     (line 2279)
* mysqld, transaction-isolation option:  server-options.     (line 2256)
* mysqld, user option:                   server-options.     (line 2312)
* mysqld, verbose option:                server-options.     (line 2347)
* mysqld, version option:                server-options.     (line 2351)
* mysqld-version option, mysqld_safe:    mysqld-safe.        (line  209)
* mysqld_multi <1>:                      mysqld-multi.       (line    6)
* mysqld_multi:                          programs-overview.  (line   58)
* mysqld_multi, config-file option:      mysqld-multi.       (line   89)
* mysqld_multi, defaults-extra-file option: mysqld-multi.    (line   66)
* mysqld_multi, defaults-file option:    mysqld-multi.       (line   64)
* mysqld_multi, example option:          mysqld-multi.       (line   95)
* mysqld_multi, help option:             mysqld-multi.       (line   85)
* mysqld_multi, log option:              mysqld-multi.       (line   99)
* mysqld_multi, mysqladmin option:       mysqld-multi.       (line  104)
* mysqld_multi, mysqld option:           mysqld-multi.       (line  109)
* mysqld_multi, no-defaults option:      mysqld-multi.       (line   62)
* mysqld_multi, no-log option:           mysqld-multi.       (line  125)
* mysqld_multi, password option:         mysqld-multi.       (line  130)
* mysqld_multi, silent option:           mysqld-multi.       (line  136)
* mysqld_multi, tcp-ip option:           mysqld-multi.       (line  140)
* mysqld_multi, user option:             mysqld-multi.       (line  148)
* mysqld_multi, verbose option:          mysqld-multi.       (line  153)
* mysqld_multi, version option:          mysqld-multi.       (line  157)
* mysqld_safe <1>:                       mysqld-safe.        (line    6)
* mysqld_safe:                           programs-overview.  (line   45)
* mysqld_safe, basedir option:           mysqld-safe.        (line  115)
* mysqld_safe, core-file-size option:    mysqld-safe.        (line  119)
* mysqld_safe, datadir option:           mysqld-safe.        (line  124)
* mysqld_safe, defaults-extra-file option: mysqld-safe.      (line  128)
* mysqld_safe, defaults-file option:     mysqld-safe.        (line  135)
* mysqld_safe, help option:              mysqld-safe.        (line  111)
* mysqld_safe, ledir option:             mysqld-safe.        (line  141)
* mysqld_safe, log-error option:         mysqld-safe.        (line  147)
* mysqld_safe, malloc-lib option:        mysqld-safe.        (line  151)
* mysqld_safe, mysqld option:            mysqld-safe.        (line  200)
* mysqld_safe, mysqld-version option:    mysqld-safe.        (line  209)
* mysqld_safe, nice option:              mysqld-safe.        (line  220)
* mysqld_safe, no-defaults option:       mysqld-safe.        (line  225)
* mysqld_safe, open-files-limit option:  mysqld-safe.        (line  230)
* mysqld_safe, pid-file option:          mysqld-safe.        (line  237)
* mysqld_safe, plugin-dir option:        mysqld-safe.        (line  241)
* mysqld_safe, port option:              mysqld-safe.        (line  246)
* mysqld_safe, skip-kill-mysqld option:  mysqld-safe.        (line  252)
* mysqld_safe, skip-syslog option:       mysqld-safe.        (line  262)
* mysqld_safe, socket option:            mysqld-safe.        (line  257)
* mysqld_safe, syslog option:            mysqld-safe.        (line  262)
* mysqld_safe, syslog-tag option:        mysqld-safe.        (line  271)
* mysqld_safe, timezone option:          mysqld-safe.        (line  279)
* mysqld_safe, user option:              mysqld-safe.        (line  285)
* mysqldump <1>:                         glossary.           (line 1990)
* mysqldump <2>:                         mysqldump.          (line    6)
* mysqldump <3>:                         programs-overview.  (line  124)
* mysqldump:                             copying-databases.  (line   45)
* mysqldump, add-drop-database option:   mysqldump.          (line  409)
* mysqldump, add-drop-table option:      mysqldump.          (line  418)
* mysqldump, add-drop-trigger option:    mysqldump.          (line  423)
* mysqldump, add-locks option:           mysqldump.          (line  434)
* mysqldump, all-databases option:       mysqldump.          (line  441)
* mysqldump, all-tablespaces option:     mysqldump.          (line  447)
* mysqldump, allow-keywords option:      mysqldump.          (line  455)
* mysqldump, apply-slave-statements option: mysqldump.       (line  460)
* mysqldump, bind-address option:        mysqldump.          (line  468)
* mysqldump, character-sets-dir option:  mysqldump.          (line  478)
* mysqldump, comments option:            mysqldump.          (line  483)
* mysqldump, compact option:             mysqldump.          (line  490)
* mysqldump, compatible option:          mysqldump.          (line  496)
* mysqldump, complete-insert option:     mysqldump.          (line  516)
* mysqldump, compress option:            mysqldump.          (line  521)
* mysqldump, create-options option:      mysqldump.          (line  526)
* mysqldump, databases option:           mysqldump.          (line  531)
* mysqldump, debug option:               mysqldump.          (line  540)
* mysqldump, debug-check option:         mysqldump.          (line  546)
* mysqldump, debug-info option:          mysqldump.          (line  550)
* mysqldump, default-auth option:        mysqldump.          (line  555)
* mysqldump, default-character-set option: mysqldump.        (line  562)
* mysqldump, delayed-insert option:      mysqldump.          (line  569)
* mysqldump, delete-master-logs option:  mysqldump.          (line  574)
* mysqldump, disable-keys option:        mysqldump.          (line  581)
* mysqldump, dump-date option:           mysqldump.          (line  591)
* mysqldump, dump-slave option:          mysqldump.          (line  604)
* mysqldump, events option:              mysqldump.          (line  627)
* mysqldump, extended-insert option:     mysqldump.          (line  632)
* mysqldump, fields-enclosed-by option <1>: mysqlimport.     (line  189)
* mysqldump, fields-enclosed-by option:  mysqldump.          (line  640)
* mysqldump, fields-escaped-by option <1>: mysqlimport.      (line  193)
* mysqldump, fields-escaped-by option:   mysqldump.          (line  644)
* mysqldump, fields-optionally-enclosed-by option <1>: mysqlimport.
                                                             (line  191)
* mysqldump, fields-optionally-enclosed-by option: mysqldump.
                                                             (line  642)
* mysqldump, fields-terminated-by option <1>: mysqlimport.   (line  187)
* mysqldump, fields-terminated-by option: mysqldump.         (line  638)
* mysqldump, first-slave option:         mysqldump.          (line  650)
* mysqldump, flush-logs option:          mysqldump.          (line  655)
* mysqldump, flush-privileges option:    mysqldump.          (line  668)
* mysqldump, force option:               mysqldump.          (line  676)
* mysqldump, help option:                mysqldump.          (line  405)
* mysqldump, hex-blob option:            mysqldump.          (line  694)
* mysqldump, host option:                mysqldump.          (line  689)
* mysqldump, ignore-table option:        mysqldump.          (line  709)
* mysqldump, include-master-host-port option: mysqldump.     (line  701)
* mysqldump, insert-ignore option:       mysqldump.          (line  716)
* mysqldump, lines-terminated-by option <1>: mysqlimport.    (line  217)
* mysqldump, lines-terminated-by option: mysqldump.          (line  721)
* mysqldump, lock-all-tables option:     mysqldump.          (line  727)
* mysqldump, lock-tables option:         mysqldump.          (line  734)
* mysqldump, log-error option:           mysqldump.          (line  748)
* mysqldump, master-data option:         mysqldump.          (line  753)
* mysqldump, no-autocommit option:       mysqldump.          (line  832)
* mysqldump, no-create-db option:        mysqldump.          (line  838)
* mysqldump, no-create-info option:      mysqldump.          (line  844)
* mysqldump, no-data option:             mysqldump.          (line  856)
* mysqldump, no-set-names option:        mysqldump.          (line  864)
* mysqldump, no-tablespaces option:      mysqldump.          (line  868)
* mysqldump, opt option:                 mysqldump.          (line  875)
* mysqldump, order-by-primary option:    mysqldump.          (line  889)
* mysqldump, password option:            mysqldump.          (line  896)
* mysqldump, pipe option:                mysqldump.          (line  908)
* mysqldump, plugin-dir option:          mysqldump.          (line  913)
* mysqldump, port option:                mysqldump.          (line  922)
* mysqldump, problems <1>:               view-restrictions.  (line   82)
* mysqldump, problems:                   mysqldump.          (line 1280)
* mysqldump, protocol option:            mysqldump.          (line  926)
* mysqldump, quick option:               mysqldump.          (line  933)
* mysqldump, quote-names option:         mysqldump.          (line  940)
* mysqldump, replace option:             mysqldump.          (line  949)
* mysqldump, result-file option:         mysqldump.          (line  954)
* mysqldump, routines option:            mysqldump.          (line  962)
* mysqldump, set-charset option:         mysqldump.          (line  984)
* mysqldump, single-transaction option:  mysqldump.          (line  990)
* mysqldump, skip-comments option:       mysqldump.          (line 1030)
* mysqldump, skip-opt option:            mysqldump.          (line 1034)
* mysqldump, socket option:              mysqldump.          (line 1038)
* mysqldump, SSL options:                mysqldump.          (line 1043)
* mysqldump, tab option:                 mysqldump.          (line 1049)
* mysqldump, tables option:              mysqldump.          (line 1073)
* mysqldump, triggers option:            mysqldump.          (line 1079)
* mysqldump, tz-utc option:              mysqldump.          (line 1084)
* mysqldump, user option:                mysqldump.          (line 1097)
* mysqldump, using for backups:          using-mysqldump.    (line   14)
* mysqldump, verbose option:             mysqldump.          (line 1101)
* mysqldump, version option:             mysqldump.          (line 1105)
* mysqldump, views <1>:                  view-restrictions.  (line   82)
* mysqldump, views:                      mysqldump.          (line 1280)
* mysqldump, where option:               mysqldump.          (line 1109)
* mysqldump, workarounds <1>:            view-restrictions.  (line   82)
* mysqldump, workarounds:                mysqldump.          (line 1280)
* mysqldump, xml option:                 mysqldump.          (line 1121)
* mysqldumpslow <1>:                     mysqldumpslow.      (line    6)
* mysqldumpslow:                         programs-overview.  (line  183)
* mysqldumpslow, debug option:           mysqldumpslow.      (line   53)
* mysqldumpslow, help option:            mysqldumpslow.      (line   45)
* mysqldumpslow, verbose option:         mysqldumpslow.      (line  103)
* mysqlhotcopy <1>:                      mysqlhotcopy.       (line    6)
* mysqlhotcopy:                          programs-overview.  (line  188)
* mysqlhotcopy, addtodest option:        mysqlhotcopy.       (line   88)
* mysqlhotcopy, allowold option:         mysqlhotcopy.       (line   93)
* mysqlhotcopy, checkpoint option:       mysqlhotcopy.       (line   98)
* mysqlhotcopy, chroot option:           mysqlhotcopy.       (line  103)
* mysqlhotcopy, debug option:            mysqlhotcopy.       (line  109)
* mysqlhotcopy, dryrun option:           mysqlhotcopy.       (line  113)
* mysqlhotcopy, flushlog option:         mysqlhotcopy.       (line  117)
* mysqlhotcopy, help option:             mysqlhotcopy.       (line   84)
* mysqlhotcopy, host option:             mysqlhotcopy.       (line  121)
* mysqlhotcopy, keepold option:          mysqlhotcopy.       (line  127)
* mysqlhotcopy, method option:           mysqlhotcopy.       (line  131)
* mysqlhotcopy, noindices option:        mysqlhotcopy.       (line  135)
* mysqlhotcopy, old_server option:       mysqlhotcopy.       (line  156)
* mysqlhotcopy, password option:         mysqlhotcopy.       (line  142)
* mysqlhotcopy, port option:             mysqlhotcopy.       (line  152)
* mysqlhotcopy, quiet option:            mysqlhotcopy.       (line  164)
* mysqlhotcopy, record_log_pos option:   mysqlhotcopy.       (line  168)
* mysqlhotcopy, regexp option:           mysqlhotcopy.       (line  173)
* mysqlhotcopy, resetmaster option:      mysqlhotcopy.       (line  178)
* mysqlhotcopy, resetslave option:       mysqlhotcopy.       (line  182)
* mysqlhotcopy, socket option:           mysqlhotcopy.       (line  186)
* mysqlhotcopy, suffix option:           mysqlhotcopy.       (line  190)
* mysqlhotcopy, tmpdir option:           mysqlhotcopy.       (line  194)
* mysqlhotcopy, user option:             mysqlhotcopy.       (line  198)
* mysqlimport <1>:                       load-data.          (line   33)
* mysqlimport <2>:                       mysqlimport.        (line    6)
* mysqlimport <3>:                       programs-overview.  (line  129)
* mysqlimport:                           copying-databases.  (line   45)
* mysqlimport, bind-address option:      mysqlimport.        (line  131)
* mysqlimport, character-sets-dir option: mysqlimport.       (line  141)
* mysqlimport, columns option:           mysqlimport.        (line  146)
* mysqlimport, compress option:          mysqlimport.        (line  152)
* mysqlimport, debug option:             mysqlimport.        (line  157)
* mysqlimport, debug-check option:       mysqlimport.        (line  162)
* mysqlimport, debug-info option:        mysqlimport.        (line  166)
* mysqlimport, default-auth option:      mysqlimport.        (line  176)
* mysqlimport, default-character-set option: mysqlimport.    (line  171)
* mysqlimport, delete option:            mysqlimport.        (line  183)
* mysqlimport, force option:             mysqlimport.        (line  198)
* mysqlimport, help option:              mysqlimport.        (line  127)
* mysqlimport, host option:              mysqlimport.        (line  204)
* mysqlimport, ignore option:            mysqlimport.        (line  209)
* mysqlimport, ignore-lines option:      mysqlimport.        (line  213)
* mysqlimport, local option:             mysqlimport.        (line  226)
* mysqlimport, lock-tables option:       mysqlimport.        (line  230)
* mysqlimport, low-priority option:      mysqlimport.        (line  235)
* mysqlimport, password option:          mysqlimport.        (line  241)
* mysqlimport, pipe option:              mysqlimport.        (line  253)
* mysqlimport, plugin-dir option:        mysqlimport.        (line  258)
* mysqlimport, port option:              mysqlimport.        (line  268)
* mysqlimport, protocol option:          mysqlimport.        (line  272)
* mysqlimport, replace option:           mysqlimport.        (line  279)
* mysqlimport, silent option:            mysqlimport.        (line  289)
* mysqlimport, socket option:            mysqlimport.        (line  293)
* mysqlimport, SSL options:              mysqlimport.        (line  298)
* mysqlimport, use-threads option:       mysqlimport.        (line  308)
* mysqlimport, user option:              mysqlimport.        (line  304)
* mysqlimport, verbose option:           mysqlimport.        (line  312)
* mysqlimport, version option:           mysqlimport.        (line  316)
* MySQLInstallerConsole:                 MySQLInstallerConsole.
                                                             (line    6)
* MySQLInstallerConsole, action option:  MySQLInstallerConsole.
                                                             (line   53)
* MySQLInstallerConsole, catalog option: MySQLInstallerConsole.
                                                             (line   41)
* MySQLInstallerConsole, config option:  MySQLInstallerConsole.
                                                             (line   80)
* MySQLInstallerConsole, help option:    MySQLInstallerConsole.
                                                             (line   24)
* MySQLInstallerConsole, install action option: MySQLInstallerConsole.
                                                             (line   60)
* MySQLInstallerConsole, list action option: MySQLInstallerConsole.
                                                             (line   69)
* MySQLInstallerConsole, nowait option:  MySQLInstallerConsole.
                                                             (line   35)
* MySQLInstallerConsole, product option: MySQLInstallerConsole.
                                                             (line   74)
* MySQLInstallerConsole, remove action option: MySQLInstallerConsole.
                                                             (line   66)
* MySQLInstallerConsole, status action option: MySQLInstallerConsole.
                                                             (line   72)
* MySQLInstallerConsole, type option:    MySQLInstallerConsole.
                                                             (line   46)
* MySQLInstallerConsole, updates option: MySQLInstallerConsole.
                                                             (line   30)
* MySQLInstallerConsole, upgrade action option: MySQLInstallerConsole.
                                                             (line   63)
* MySQLInstallerConsole, user option:    MySQLInstallerConsole.
                                                             (line   85)
* mysqlshow <1>:                         mysqlshow.          (line    6)
* mysqlshow:                             programs-overview.  (line  134)
* mysqlshow, bind-address option:        mysqlshow.          (line  118)
* mysqlshow, character-sets-dir option:  mysqlshow.          (line  128)
* mysqlshow, compress option:            mysqlshow.          (line  133)
* mysqlshow, count option:               mysqlshow.          (line  138)
* mysqlshow, debug option:               mysqlshow.          (line  143)
* mysqlshow, debug-check option:         mysqlshow.          (line  148)
* mysqlshow, debug-info option:          mysqlshow.          (line  152)
* mysqlshow, default-auth option:        mysqlshow.          (line  162)
* mysqlshow, default-character-set option: mysqlshow.        (line  157)
* mysqlshow, help option:                mysqlshow.          (line  114)
* mysqlshow, host option:                mysqlshow.          (line  169)
* mysqlshow, keys option:                mysqlshow.          (line  173)
* mysqlshow, password option:            mysqlshow.          (line  177)
* mysqlshow, pipe option:                mysqlshow.          (line  189)
* mysqlshow, plugin-dir option:          mysqlshow.          (line  194)
* mysqlshow, port option:                mysqlshow.          (line  203)
* mysqlshow, protocol option:            mysqlshow.          (line  207)
* mysqlshow, show-table-type option:     mysqlshow.          (line  214)
* mysqlshow, socket option:              mysqlshow.          (line  219)
* mysqlshow, SSL options:                mysqlshow.          (line  224)
* mysqlshow, status option:              mysqlshow.          (line  230)
* mysqlshow, user option:                mysqlshow.          (line  234)
* mysqlshow, verbose option:             mysqlshow.          (line  238)
* mysqlshow, version option:             mysqlshow.          (line  244)
* mysqlslap <1>:                         mysqlslap.          (line    6)
* mysqlslap:                             programs-overview.  (line  139)
* mysqlslap, auto-generate-sql option:   mysqlslap.          (line  210)
* mysqlslap, auto-generate-sql-add-autoincrement option: mysqlslap.
                                                             (line  215)
* mysqlslap, auto-generate-sql-execute-number option: mysqlslap.
                                                             (line  219)
* mysqlslap, auto-generate-sql-guid-primary option: mysqlslap.
                                                             (line  223)
* mysqlslap, auto-generate-sql-load-type option: mysqlslap.  (line  227)
* mysqlslap, auto-generate-sql-secondary-indexes option: mysqlslap.
                                                             (line  234)
* mysqlslap, auto-generate-sql-unique-query-number option: mysqlslap.
                                                             (line  239)
* mysqlslap, auto-generate-sql-unique-write-number option: mysqlslap.
                                                             (line  247)
* mysqlslap, auto-generate-sql-write-number option: mysqlslap.
                                                             (line  252)
* mysqlslap, commit option:              mysqlslap.          (line  256)
* mysqlslap, compress option:            mysqlslap.          (line  261)
* mysqlslap, concurrency option:         mysqlslap.          (line  266)
* mysqlslap, create option:              mysqlslap.          (line  271)
* mysqlslap, create-schema option:       mysqlslap.          (line  276)
* mysqlslap, csv option:                 mysqlslap.          (line  286)
* mysqlslap, debug option:               mysqlslap.          (line  291)
* mysqlslap, debug-check option:         mysqlslap.          (line  297)
* mysqlslap, debug-info option:          mysqlslap.          (line  301)
* mysqlslap, default-auth option:        mysqlslap.          (line  306)
* mysqlslap, delimiter option:           mysqlslap.          (line  313)
* mysqlslap, detach option:              mysqlslap.          (line  318)
* mysqlslap, enable-cleartext-plugin option: mysqlslap.      (line  323)
* mysqlslap, engine option:              mysqlslap.          (line  329)
* mysqlslap, help option:                mysqlslap.          (line  206)
* mysqlslap, host option:                mysqlslap.          (line  333)
* mysqlslap, iterations option:          mysqlslap.          (line  337)
* mysqlslap, no-drop option:             mysqlslap.          (line  341)
* mysqlslap, number-char-cols option:    mysqlslap.          (line  346)
* mysqlslap, number-int-cols option:     mysqlslap.          (line  351)
* mysqlslap, number-of-queries option:   mysqlslap.          (line  356)
* mysqlslap, only-print option:          mysqlslap.          (line  367)
* mysqlslap, password option:            mysqlslap.          (line  372)
* mysqlslap, pipe option:                mysqlslap.          (line  384)
* mysqlslap, plugin-dir option:          mysqlslap.          (line  389)
* mysqlslap, port option:                mysqlslap.          (line  398)
* mysqlslap, post-query option:          mysqlslap.          (line  402)
* mysqlslap, post-system option:         mysqlslap.          (line  414)
* mysqlslap, pre-query option:           mysqlslap.          (line  419)
* mysqlslap, pre-system option:          mysqlslap.          (line  425)
* mysqlslap, protocol option:            mysqlslap.          (line  430)
* mysqlslap, query option:               mysqlslap.          (line  437)
* mysqlslap, shared-memory-base-name option: mysqlslap.      (line  408)
* mysqlslap, silent option:              mysqlslap.          (line  442)
* mysqlslap, socket option:              mysqlslap.          (line  446)
* mysqlslap, SSL options:                mysqlslap.          (line  451)
* mysqlslap, user option:                mysqlslap.          (line  457)
* mysqlslap, verbose option:             mysqlslap.          (line  461)
* mysqlslap, version option:             mysqlslap.          (line  467)
* mysqltest, MySQL Test Suite:           mysql-test-suite.   (line    6)
* NAME_CONST() <1>:                      stored-programs-logging.
                                                             (line  340)
* NAME_CONST():                          miscellaneous-functions.
                                                             (line  185)
* name_file option, comp_err:            comp-err.           (line   52)
* named pipes <1>:                       windows-testing.    (line    6)
* named pipes:                           windows-select-server.
                                                             (line   29)
* named-commands option, mysql:          mysql-command-options.
                                                             (line  333)
* named_pipe system variable:            server-system-variables.
                                                             (line 3888)
* names:                                 identifiers.        (line   13)
* names, case sensitivity:               identifier-case-sensitivity.
                                                             (line    6)
* names, variables:                      user-variables.     (line    6)
* naming, releases of MySQL:             choosing-version.   (line   56)
* NATIONAL CHAR data type:               string-type-overview.
                                                             (line   89)
* NATIONAL VARCHAR data type:            string-type-overview.
                                                             (line  121)
* native backup and restore, backup identifiers: mysql-cluster-backup-using-management-client.
                                                             (line   94)
* native functions, adding:              adding-native-function.
                                                             (line    6)
* native thread support:                 supported-os.       (line    6)
* natural key:                           glossary.           (line 1998)
* NATURAL LEFT JOIN:                     join.               (line    6)
* NATURAL LEFT OUTER JOIN:               join.               (line    6)
* NATURAL RIGHT JOIN:                    join.               (line    6)
* NATURAL RIGHT OUTER JOIN:              join.               (line    6)
* NCHAR data type:                       string-type-overview.
                                                             (line   89)
* NDB API _slave status variables, and MySQL Cluster Replication: mysql-cluster-replication.
                                                             (line   61)
* NDB API counters (MySQL Cluster):      mysql-cluster-ndb-api-statistics.
                                                             (line    6)
* NDB API counters (MySQL Cluster), scope: mysql-cluster-ndb-api-statistics.
                                                             (line  233)
* NDB API counters (MySQL Cluster), status variables associated with: mysql-cluster-ndb-api-statistics.
                                                             (line  396)
* NDB API counters (MySQL Cluster), types: mysql-cluster-ndb-api-statistics.
                                                             (line  254)
* NDB API, and distributed grant tables: mysql-cluster-privilege-distribution.
                                                             (line  196)
* NDB API, and distributed privileges:   mysql-cluster-privilege-distribution.
                                                             (line  196)
* ndb option, perror:                    perror.             (line   44)
* NDB statistics variables (MySQL Cluster): mysql-cluster-ndb-api-statistics.
                                                             (line    6)
* NDB statistics variables (MySQL Cluster), scope: mysql-cluster-ndb-api-statistics.
                                                             (line  233)
* NDB statistics variables (MySQL Cluster), types: mysql-cluster-ndb-api-statistics.
                                                             (line  254)
* NDB statistics variables, and NDB API counters: mysql-cluster-ndb-api-statistics.
                                                             (line  396)
* NDB storage engine:                    mysql-cluster.      (line   16)
* NDB storage engine, FAQ:               faqs-mysql-cluster. (line    6)
* NDB tables, and MySQL root user:       mysql-cluster-security-mysql-privileges.
                                                             (line   33)
* NDB utilities, security issues:        mysql-cluster-security-mysql-security-procedures.
                                                             (line   76)
* NDB$MAX():                             mysql-cluster-replication-conflict-resolution.
                                                             (line  275)
* NDB$MAX_DELETE_WIN():                  mysql-cluster-replication-conflict-resolution.
                                                             (line  294)
* NDB$OLD:                               mysql-cluster-replication-conflict-resolution.
                                                             (line  254)
* NDB, creating large tables using:      create-table.       (line  820)
* NDB, MAX_ROWS:                         create-table.       (line  820)
* ndb-batch-size option, mysqld:         mysql-cluster-program-options-mysqld.
                                                             (line   23)
* ndb-blob-read-batch-bytes option, mysqld: mysql-cluster-program-options-mysqld.
                                                             (line  106)
* ndb-blob-write-batch-bytes option, mysqld: mysql-cluster-program-options-mysqld.
                                                             (line  144)
* ndb-cluster-connection-pool option, mysqld: mysql-cluster-program-options-mysqld.
                                                             (line   44)
* ndb-connectstring option (MySQL Cluster programs): mysql-cluster-program-options-common.
                                                             (line  108)
* ndb-connectstring option, mysqld:      mysql-cluster-program-options-mysqld.
                                                             (line  183)
* ndb-connectstring option, ndb_config:  mysql-cluster-programs-ndb-config.
                                                             (line  134)
* ndb-deferred-constraints option (MySQL Cluster): mysql-cluster-program-options-mysqld.
                                                             (line  199)
* ndb-distribution option (MySQL Cluster): mysql-cluster-program-options-mysqld.
                                                             (line  226)
* ndb-log-apply-status option, mysqld:   mysql-cluster-program-options-mysqld.
                                                             (line  287)
* ndb-log-empty-epochs option, mysqld:   mysql-cluster-program-options-mysqld.
                                                             (line  422)
* ndb-log-orig option, mysqld:           mysql-cluster-program-options-mysqld.
                                                             (line  324)
* ndb-log-transaction-id option, mysqld: mysql-cluster-program-options-mysqld.
                                                             (line  349)
* ndb-log-update-as-write (mysqld option): mysql-cluster-replication-conflict-resolution.
                                                             (line   81)
* ndb-mgmd-host option (MySQL Cluster programs): mysql-cluster-program-options-common.
                                                             (line  169)
* ndb-mgmd-host option (MySQL Cluster):  mysql-cluster-program-options-mysqld.
                                                             (line  249)
* ndb-nodegroup-map option (ndb_restore): mysql-cluster-programs-ndb-restore.
                                                             (line  576)
* ndb-nodeid option (MySQL Cluster programs): mysql-cluster-program-options-common.
                                                             (line  187)
* ndb-nodeid option, mysqld:             mysql-cluster-program-options-mysqld.
                                                             (line  383)
* ndb-optimized-node-selection option (MySQL Cluster): mysql-cluster-program-options-common.
                                                             (line  203)
* ndb_apply_status table (MySQL Cluster replication) <1>: mysql-cluster-replication-failover.
                                                             (line   10)
* ndb_apply_status table (MySQL Cluster replication): mysql-cluster-replication-schema.
                                                             (line   86)
* ndb_binlog_index table (MySQL Cluster replication) <1>: mysql-cluster-replication-failover.
                                                             (line   18)
* ndb_binlog_index table (MySQL Cluster replication): mysql-cluster-replication-schema.
                                                             (line    6)
* ndb_blob_tool <1>:                     mysql-cluster-programs-ndb-blob-tool.
                                                             (line    6)
* ndb_blob_tool:                         mysql-cluster-programs.
                                                             (line   34)
* ndb_blob_tool, check-orphans option:   mysql-cluster-programs-ndb-blob-tool.
                                                             (line   63)
* ndb_blob_tool, database option:        mysql-cluster-programs-ndb-blob-tool.
                                                             (line   76)
* ndb_blob_tool, delete-orphans option:  mysql-cluster-programs-ndb-blob-tool.
                                                             (line   90)
* ndb_blob_tool, dump-file option:       mysql-cluster-programs-ndb-blob-tool.
                                                             (line  103)
* ndb_blob_tool, verbose option:         mysql-cluster-programs-ndb-blob-tool.
                                                             (line  119)
* ndb_config <1>:                        mysql-cluster-programs-ndb-config.
                                                             (line    6)
* ndb_config:                            mysql-cluster-programs.
                                                             (line   34)
* ndb_config, config-file option:        mysql-cluster-programs-ndb-config.
                                                             (line  152)
* ndb_config, config_from_node option:   mysql-cluster-programs-ndb-config.
                                                             (line  102)
* ndb_config, configinfo option:         mysql-cluster-programs-ndb-config.
                                                             (line  364)
* ndb_config, connections option:        mysql-cluster-programs-ndb-config.
                                                             (line  274)
* ndb_config, fields option:             mysql-cluster-programs-ndb-config.
                                                             (line  324)
* ndb_config, host option:               mysql-cluster-programs-ndb-config.
                                                             (line  212)
* ndb_config, id option:                 mysql-cluster-programs-ndb-config.
                                                             (line  241)
* ndb_config, mycnf option:              mysql-cluster-programs-ndb-config.
                                                             (line  170)
* ndb_config, ndb-connectstring option:  mysql-cluster-programs-ndb-config.
                                                             (line  134)
* ndb_config, nodeid option:             mysql-cluster-programs-ndb-config.
                                                             (line  243)
* ndb_config, nodes option:              mysql-cluster-programs-ndb-config.
                                                             (line  258)
* ndb_config, query option:              mysql-cluster-programs-ndb-config.
                                                             (line  183)
* ndb_config, rows option:               mysql-cluster-programs-ndb-config.
                                                             (line  344)
* ndb_config, system option:             mysql-cluster-programs-ndb-config.
                                                             (line  289)
* ndb_config, type option:               mysql-cluster-programs-ndb-config.
                                                             (line  306)
* ndb_config, usage option:              mysql-cluster-programs-ndb-config.
                                                             (line   90)
* ndb_config, version option:            mysql-cluster-programs-ndb-config.
                                                             (line  123)
* ndb_config, xml option:                mysql-cluster-programs-ndb-config.
                                                             (line  420)
* ndb_cpcd <1>:                          mysql-cluster-programs-ndb-cpcd.
                                                             (line    6)
* ndb_cpcd:                              mysql-cluster-programs.
                                                             (line   34)
* ndb_delete_all <1>:                    mysql-cluster-programs-ndb-delete-all.
                                                             (line    6)
* ndb_delete_all:                        mysql-cluster-programs.
                                                             (line   34)
* ndb_delete_all, transactional option:  mysql-cluster-programs-ndb-delete-all.
                                                             (line   44)
* ndb_desc <1>:                          mysql-cluster-programs-ndb-desc.
                                                             (line    6)
* ndb_desc:                              mysql-cluster-programs.
                                                             (line   34)
* ndb_desc, blob-info option:            mysql-cluster-programs-ndb-desc.
                                                             (line  280)
* ndb_desc, database option:             mysql-cluster-programs-ndb-desc.
                                                             (line  288)
* ndb_desc, extra-node-info option:      mysql-cluster-programs-ndb-desc.
                                                             (line  292)
* ndb_desc, extra-partition-info option: mysql-cluster-programs-ndb-desc.
                                                             (line  303)
* ndb_desc, retries option:              mysql-cluster-programs-ndb-desc.
                                                             (line  307)
* ndb_desc, table option:                mysql-cluster-programs-ndb-desc.
                                                             (line  312)
* ndb_desc, unqualified option:          mysql-cluster-programs-ndb-desc.
                                                             (line  318)
* ndb_dist_priv.sql:                     mysql-cluster-privilege-distribution.
                                                             (line   11)
* ndb_drop_index <1>:                    mysql-cluster-programs-ndb-drop-index.
                                                             (line    6)
* ndb_drop_index:                        mysql-cluster-programs.
                                                             (line   34)
* ndb_drop_table <1>:                    mysql-cluster-programs-ndb-drop-table.
                                                             (line    6)
* ndb_drop_table:                        mysql-cluster-programs.
                                                             (line   34)
* ndb_error_reporter <1>:                mysql-cluster-programs-ndb-error-reporter.
                                                             (line    6)
* ndb_error_reporter:                    mysql-cluster-programs.
                                                             (line   34)
* ndb_index_stat <1>:                    mysql-cluster-programs-ndb-index-stat.
                                                             (line    6)
* ndb_index_stat:                        mysql-cluster-programs.
                                                             (line   34)
* ndb_log_empty_epochs system variable:  mysql-cluster-system-variables.
                                                             (line  964)
* ndb_log_transaction_id system variable: mysql-cluster-system-variables.
                                                             (line  523)
* ndb_mgm <1>:                           mysql-cluster-programs-ndb-mgm.
                                                             (line    6)
* ndb_mgm:                               mysql-cluster-programs.
                                                             (line   34)
* ndb_mgm (MySQL Cluster management node client): mysql-cluster-install-first-start.
                                                             (line   34)
* ndb_mgm, using with MySQL Cluster Manager: mysql-cluster-mgm-client-commands.
                                                             (line   17)
* ndb_mgmd <1>:                          mysql-cluster-programs-ndb-mgmd.
                                                             (line    6)
* ndb_mgmd:                              mysql-cluster-programs.
                                                             (line   34)
* ndb_mgmd (MySQL Cluster process):      mysql-cluster-programs-ndb-mgmd.
                                                             (line    6)
* ndb_mgmd (MySQL Cluster), defined:     mysql-cluster-basics.
                                                             (line    6)
* ndb_mgmd, mycnf option:                mysql-cluster-programs-ndb-mgmd.
                                                             (line  241)
* ndb_print_backup_file <1>:             mysql-cluster-programs-ndb-print-backup-file.
                                                             (line    6)
* ndb_print_backup_file:                 mysql-cluster-programs.
                                                             (line   34)
* ndb_print_schema_file <1>:             mysql-cluster-programs-ndb-print-schema-file.
                                                             (line    6)
* ndb_print_schema_file:                 mysql-cluster-programs.
                                                             (line   34)
* ndb_print_sys_file <1>:                mysql-cluster-programs-ndb-print-sys-file.
                                                             (line    6)
* ndb_print_sys_file:                    mysql-cluster-programs.
                                                             (line   34)
* ndb_replication system table:          mysql-cluster-replication-conflict-resolution.
                                                             (line  163)
* ndb_restore:                           mysql-cluster-programs-ndb-restore.
                                                             (line    6)
* ndb_restore, and circular replication: mysql-cluster-replication-multi-master.
                                                             (line   69)
* ndb_restore, append option:            mysql-cluster-programs-ndb-restore.
                                                             (line  527)
* ndb_restore, attribute promotion:      mysql-cluster-programs-ndb-restore.
                                                             (line  259)
* ndb_restore, backup_path option:       mysql-cluster-programs-ndb-restore.
                                                             (line  373)
* ndb_restore, disable-indexes option:   mysql-cluster-programs-ndb-restore.
                                                             (line  810)
* ndb_restore, dont_ignore_systab_0 option: mysql-cluster-programs-ndb-restore.
                                                             (line  567)
* ndb_restore, errors:                   mysql-cluster-programs-ndb-restore.
                                                             (line  904)
* ndb_restore, exclude-databases option: mysql-cluster-programs-ndb-restore.
                                                             (line  690)
* ndb_restore, exclude-missing-columns option: mysql-cluster-programs-ndb-restore.
                                                             (line  794)
* ndb_restore, exclude-tables option:    mysql-cluster-programs-ndb-restore.
                                                             (line  700)
* ndb_restore, fields-enclosed-by option: mysql-cluster-programs-ndb-restore.
                                                             (line  457)
* ndb_restore, fields-optionally-enclosed-by option: mysql-cluster-programs-ndb-restore.
                                                             (line  471)
* ndb_restore, fields-terminated-by option: mysql-cluster-programs-ndb-restore.
                                                             (line  487)
* ndb_restore, hex option:               mysql-cluster-programs-ndb-restore.
                                                             (line  502)
* ndb_restore, include-databases option: mysql-cluster-programs-ndb-restore.
                                                             (line  623)
* ndb_restore, include-tables option:    mysql-cluster-programs-ndb-restore.
                                                             (line  633)
* ndb_restore, lossy-conversions option: mysql-cluster-programs-ndb-restore.
                                                             (line  289)
* ndb_restore, ndb-nodegroup-map option: mysql-cluster-programs-ndb-restore.
                                                             (line  576)
* ndb_restore, no-binlog option:         mysql-cluster-programs-ndb-restore.
                                                             (line  582)
* ndb_restore, no-restore-disk-objects option: mysql-cluster-programs-ndb-restore.
                                                             (line  588)
* ndb_restore, no-upgrade option:        mysql-cluster-programs-ndb-restore.
                                                             (line  421)
* ndb_restore, parallelism option:       mysql-cluster-programs-ndb-restore.
                                                             (line  595)
* ndb_restore, print option:             mysql-cluster-programs-ndb-restore.
                                                             (line  553)
* ndb_restore, print_data option:        mysql-cluster-programs-ndb-restore.
                                                             (line  430)
* ndb_restore, print_log option:         mysql-cluster-programs-ndb-restore.
                                                             (line  548)
* ndb_restore, print_meta option:        mysql-cluster-programs-ndb-restore.
                                                             (line  543)
* ndb_restore, progress-frequency option: mysql-cluster-programs-ndb-restore.
                                                             (line  601)
* ndb_restore, rebuild-indexes option:   mysql-cluster-programs-ndb-restore.
                                                             (line  822)
* ndb_restore, restore-privilege-tables option: mysql-cluster-programs-ndb-restore.
                                                             (line  362)
* ndb_restore, rewrite-database option:  mysql-cluster-programs-ndb-restore.
                                                             (line  858)
* ndb_restore, skip-broken-objects option: mysql-cluster-programs-ndb-restore.
                                                             (line  832)
* ndb_restore, skip-unknown-objects option: mysql-cluster-programs-ndb-restore.
                                                             (line  845)
* ndb_restore, tab option:               mysql-cluster-programs-ndb-restore.
                                                             (line  444)
* ndb_restore, verbose option:           mysql-cluster-programs-ndb-restore.
                                                             (line  607)
* ndb_schema table (MySQL Cluster replication): mysql-cluster-replication-schema.
                                                             (line  139)
* ndb_select_all <1>:                    mysql-cluster-programs-ndb-select-all.
                                                             (line    6)
* ndb_select_all:                        mysql-cluster-programs.
                                                             (line   34)
* ndb_select_all, database option:       mysql-cluster-programs-ndb-select-all.
                                                             (line   65)
* ndb_select_all, delimiter option:      mysql-cluster-programs-ndb-select-all.
                                                             (line  108)
* ndb_select_all, descending option:     mysql-cluster-programs-ndb-select-all.
                                                             (line   93)
* ndb_select_all, disk option:           mysql-cluster-programs-ndb-select-all.
                                                             (line  115)
* ndb_select_all, gci option:            mysql-cluster-programs-ndb-select-all.
                                                             (line  125)
* ndb_select_all, header option:         mysql-cluster-programs-ndb-select-all.
                                                             (line   98)
* ndb_select_all, lock option:           mysql-cluster-programs-ndb-select-all.
                                                             (line   74)
* ndb_select_all, nodata option:         mysql-cluster-programs-ndb-select-all.
                                                             (line  136)
* ndb_select_all, order option:          mysql-cluster-programs-ndb-select-all.
                                                             (line   87)
* ndb_select_all, parallelism option:    mysql-cluster-programs-ndb-select-all.
                                                             (line   70)
* ndb_select_all, rowid option:          mysql-cluster-programs-ndb-select-all.
                                                             (line  120)
* ndb_select_all, tupscan option:        mysql-cluster-programs-ndb-select-all.
                                                             (line  132)
* ndb_select_all, useHexFormat option:   mysql-cluster-programs-ndb-select-all.
                                                             (line  102)
* ndb_select_count <1>:                  mysql-cluster-programs-ndb-select-count.
                                                             (line    6)
* ndb_select_count:                      mysql-cluster-programs.
                                                             (line   34)
* ndb_show_tables <1>:                   mysql-cluster-programs-ndb-show-tables.
                                                             (line    6)
* ndb_show_tables:                       mysql-cluster-programs.
                                                             (line   34)
* ndb_show_tables, database option:      mysql-cluster-programs-ndb-show-tables.
                                                             (line   49)
* ndb_show_tables, loops option:         mysql-cluster-programs-ndb-show-tables.
                                                             (line   53)
* ndb_show_tables, parsable option:      mysql-cluster-programs-ndb-show-tables.
                                                             (line   59)
* ndb_show_tables, show-temp-status option: mysql-cluster-programs-ndb-show-tables.
                                                             (line   64)
* ndb_show_tables, type option:          mysql-cluster-programs-ndb-show-tables.
                                                             (line   68)
* ndb_show_tables, unqualified option:   mysql-cluster-programs-ndb-show-tables.
                                                             (line   82)
* ndb_size.pl <1>:                       mysql-cluster-programs-ndb-size-pl.
                                                             (line    6)
* ndb_size.pl:                           mysql-cluster-programs.
                                                             (line   34)
* ndb_waiter <1>:                        mysql-cluster-programs-ndb-waiter.
                                                             (line    6)
* ndb_waiter:                            mysql-cluster-programs.
                                                             (line   34)
* ndb_waiter, no-contact option:         mysql-cluster-programs-ndb-waiter.
                                                             (line   76)
* ndb_waiter, not-started option:        mysql-cluster-programs-ndb-waiter.
                                                             (line   82)
* ndb_waiter, nowait-nodes option:       mysql-cluster-programs-ndb-waiter.
                                                             (line   98)
* ndb_waiter, single-user option:        mysql-cluster-programs-ndb-waiter.
                                                             (line   94)
* ndb_waiter, timeout option:            mysql-cluster-programs-ndb-waiter.
                                                             (line   88)
* ndb_waiter, wait-nodes option:         mysql-cluster-programs-ndb-waiter.
                                                             (line  110)
* ndbcluster option, mysqld:             mysql-cluster-program-options-mysqld.
                                                             (line  267)
* NDBCLUSTER storage engine:             mysql-cluster.      (line   16)
* ndbd <1>:                              mysql-cluster-programs-ndbd.
                                                             (line    6)
* ndbd:                                  mysql-cluster-programs.
                                                             (line   34)
* ndbd (MySQL Cluster), defined:         mysql-cluster-basics.
                                                             (line    6)
* ndbd_redo_log_reader:                  mysql-cluster-programs-ndbd-redo-log-reader.
                                                             (line    6)
* ndbinfo database:                      mysql-cluster-ndbinfo.
                                                             (line   28)
* ndbinfo database, and query cache:     mysql-cluster-ndbinfo.
                                                             (line  192)
* ndbinfo database, basic usage:         mysql-cluster-ndbinfo.
                                                             (line  233)
* ndbinfo database, determining support for: mysql-cluster-ndbinfo.
                                                             (line   36)
* ndbinfo_select_all <1>:                mysql-cluster-programs-ndbinfo-select-all.
                                                             (line    6)
* ndbinfo_select_all:                    mysql-cluster-programs.
                                                             (line   34)
* ndbmtd <1>:                            mysql-cluster-programs-ndbmtd.
                                                             (line    6)
* ndbmtd:                                mysql-cluster-programs.
                                                             (line   34)
* ndbmtd, configuration:                 mysql-cluster-ndbd-definition.
                                                             (line 3045)
* ndbmtd, MaxNoOfExecutionThreads:       mysql-cluster-ndbd-definition.
                                                             (line 2932)
* ndbmtd, trace files:                   mysql-cluster-programs-ndbmtd.
                                                             (line   64)
* negative values:                       number-literals.    (line    6)
* neighbor page:                         glossary.           (line 2021)
* nested queries:                        subqueries.         (line   20)
* nested-loop join algorithm:            nested-join-optimization.
                                                             (line  167)
* Nested-Loop join algorithm:            nested-loop-joins.  (line    6)
* net etiquette:                         mailing-list-use.   (line    6)
* net_buffer_length system variable:     server-system-variables.
                                                             (line 3905)
* net_buffer_length variable:            mysql-command-options.
                                                             (line  662)
* net_read_timeout system variable:      server-system-variables.
                                                             (line 3939)
* net_retry_count system variable:       server-system-variables.
                                                             (line 3964)
* net_write_timeout system variable:     server-system-variables.
                                                             (line 3996)
* NetBeans:                              connector-cpp-apps-linux-netbeans.
                                                             (line    6)
* netmask notation, in account names:    account-names.      (line   90)
* network ports, and MySQL Cluster:      mysql-cluster-security-networking-issues.
                                                             (line  186)
* new features in MySQL 5.5:             mysql-nutshell.     (line   13)
* new features in MySQL Cluster:         mysql-cluster-development.
                                                             (line   10)
* new system variable:                   server-system-variables.
                                                             (line 4017)
* new users, adding:                     unix-postinstallation.
                                                             (line  356)
* newline (\n) <1>:                      load-data.          (line  411)
* newline (\n):                          string-literals.    (line   72)
* next-key lock:                         glossary.           (line 2031)
* next-key lock, InnoDB <1>:             innodb-next-key-locking.
                                                             (line    6)
* next-key lock, InnoDB <2>:             innodb-record-level-locks.
                                                             (line    6)
* next-key lock, InnoDB <3>:             innodb-transaction-model.
                                                             (line   71)
* next-key lock, InnoDB:                 innodb-parameters.  (line 1173)
* NFS, InnoDB <1>:                       innodb-restrictions.
                                                             (line   16)
* NFS, InnoDB:                           innodb-configuration.
                                                             (line   65)
* nice option, mysqld_safe:              mysqld-safe.        (line  220)
* no matching rows:                      no-matching-rows.   (line    6)
* no-auto-rehash option, mysql:          mysql-command-options.
                                                             (line  340)
* no-autocommit option, mysqldump:       mysqldump.          (line  832)
* no-beep option, mysql:                 mysql-command-options.
                                                             (line  345)
* no-beep option, mysqladmin:            mysqladmin.         (line  381)
* no-binlog option (ndb_restore):        mysql-cluster-programs-ndb-restore.
                                                             (line  582)
* no-contact option, ndb_waiter:         mysql-cluster-programs-ndb-waiter.
                                                             (line   76)
* no-create-db option, mysqldump:        mysqldump.          (line  838)
* no-create-info option, mysqldump:      mysqldump.          (line  844)
* no-data option, mysqldump:             mysqldump.          (line  856)
* no-defaults option:                    option-file-options.
                                                             (line   47)
* no-defaults option, my_print_defaults: my-print-defaults.  (line   53)
* no-defaults option, mysql_plugin:      mysql-plugin.       (line  115)
* no-defaults option, mysqld_multi:      mysqld-multi.       (line   62)
* no-defaults option, mysqld_safe:       mysqld-safe.        (line  225)
* no-drop option, mysqlslap:             mysqlslap.          (line  341)
* no-log option, mysqld_multi:           mysqld-multi.       (line  125)
* no-named-commands option, mysql:       mysql-command-options.
                                                             (line  349)
* no-nodeid-checks option (ndb_mgmd):    mysql-cluster-programs-ndb-mgmd.
                                                             (line  116)
* no-pager option, mysql:                mysql-command-options.
                                                             (line  354)
* no-restore-disk-objects option (ndb_restore): mysql-cluster-programs-ndb-restore.
                                                             (line  588)
* no-set-names option, mysqldump:        mysqldump.          (line  864)
* no-symlinks option, myisamchk:         myisamchk-repair-options.
                                                             (line   54)
* no-tablespaces option, mysqldump:      mysqldump.          (line  868)
* no-tee option, mysql:                  mysql-command-options.
                                                             (line  359)
* no-upgrade option (ndb_restore):       mysql-cluster-programs-ndb-restore.
                                                             (line  421)
* NO_AUTO_CREATE_USER SQL mode:          server-sql-mode.    (line  192)
* NO_AUTO_VALUE_ON_ZERO SQL mode:        server-sql-mode.    (line  200)
* NO_BACKSLASH_ESCAPES SQL mode:         server-sql-mode.    (line  219)
* NO_DIR_IN_CREATE SQL mode:             server-sql-mode.    (line  225)
* NO_ENGINE_SUBSTITUTION SQL mode:       server-sql-mode.    (line  231)
* NO_FIELD_OPTIONS SQL mode:             server-sql-mode.    (line  250)
* NO_KEY_OPTIONS SQL mode:               server-sql-mode.    (line  256)
* NO_TABLE_OPTIONS SQL mode:             server-sql-mode.    (line  262)
* NO_UNSIGNED_SUBTRACTION SQL mode:      server-sql-mode.    (line  268)
* NO_ZERO_DATE SQL mode:                 server-sql-mode.    (line  315)
* NO_ZERO_IN_DATE SQL mode:              server-sql-mode.    (line  321)
* nodaemon option (ndb_mgmd):            mysql-cluster-programs-ndb-mgmd.
                                                             (line  347)
* nodata option, ndb_select_all:         mysql-cluster-programs-ndb-select-all.
                                                             (line  136)
* node groups (MySQL Cluster):           mysql-cluster-nodes-groups.
                                                             (line    6)
* node logs (MySQL Cluster):             mysql-cluster-event-reports.
                                                             (line   12)
* NodeGroup:                             mysql-cluster-ndbd-definition.
                                                             (line  163)
* NodeId <1>:                            mysql-cluster-api-definition.
                                                             (line   53)
* NodeId <2>:                            mysql-cluster-ndbd-definition.
                                                             (line   78)
* NodeId:                                mysql-cluster-mgm-definition.
                                                             (line   43)
* nodeid option, ndb_config:             mysql-cluster-programs-ndb-config.
                                                             (line  243)
* NodeId1 <1>:                           mysql-cluster-sci-definition.
                                                             (line   26)
* NodeId1 <2>:                           mysql-cluster-shm-definition.
                                                             (line   25)
* NodeId1:                               mysql-cluster-tcp-definition.
                                                             (line   37)
* NodeId2 <1>:                           mysql-cluster-sci-definition.
                                                             (line   35)
* NodeId2 <2>:                           mysql-cluster-shm-definition.
                                                             (line   34)
* NodeId2:                               mysql-cluster-tcp-definition.
                                                             (line   46)
* NODERESTART Events (MySQL Cluster):    mysql-cluster-log-events.
                                                             (line  103)
* nodes option, ndb_config:              mysql-cluster-programs-ndb-config.
                                                             (line  258)
* nodes, ndbinfo table:                  mysql-cluster-ndbinfo-nodes.
                                                             (line    6)
* noindices option, mysqlhotcopy:        mysqlhotcopy.       (line  135)
* non-blocking I/O:                      glossary.           (line 2034)
* non-locking read:                      glossary.           (line 2037)
* non-repeatable read:                   glossary.           (line 2042)
* nondelimited strings:                  date-and-time-literals.
                                                             (line  120)
* Nontransactional tables:               nontransactional-tables.
                                                             (line    6)
* NoOfDiskPagesToDiskAfterRestartACC (DEPRECATED): mysql-cluster-ndbd-definition.
                                                             (line 2193)
* NoOfDiskPagesToDiskAfterRestartTUP (DEPRECATED): mysql-cluster-ndbd-definition.
                                                             (line 2187)
* NoOfDiskPagesToDiskDuringRestartACC:   mysql-cluster-ndbd-definition.
                                                             (line 2205)
* NoOfDiskPagesToDiskDuringRestartTUP:   mysql-cluster-ndbd-definition.
                                                             (line 2199)
* NoOfFragmentLogFiles:                  mysql-cluster-ndbd-definition.
                                                             (line  998)
* NoOfFragmentLogParts:                  mysql-cluster-ndbd-definition.
                                                             (line 3045)
* NoOfReplicas:                          mysql-cluster-ndbd-definition.
                                                             (line  191)
* nopager command, mysql:                mysql-commands.     (line  138)
* normalized:                            glossary.           (line 2055)
* NoSQL:                                 glossary.           (line 2079)
* nostart option (ndbd):                 mysql-cluster-programs-ndbd.
                                                             (line  293)
* nostart option (ndbmtd):               mysql-cluster-programs-ndbd.
                                                             (line  293)
* NOT BETWEEN:                           comparison-operators.
                                                             (line  226)
* not equal (!=):                        comparison-operators.
                                                             (line   91)
* not equal (<>):                        comparison-operators.
                                                             (line   91)
* NOT EXISTS, with subqueries:           exists-and-not-exists-subqueries.
                                                             (line    6)
* NOT IN:                                comparison-operators.
                                                             (line  294)
* NOT LIKE:                              string-comparison-functions.
                                                             (line  164)
* NOT NULL constraint:                   glossary.           (line 2095)
* NOT NULL, constraint:                  constraint-invalid-data.
                                                             (line    6)
* NOT REGEXP:                            regexp.             (line   28)
* NOT, logical:                          logical-operators.  (line   29)
* not-started option, ndb_waiter:        mysql-cluster-programs-ndb-waiter.
                                                             (line   82)
* notee command, mysql:                  mysql-commands.     (line  144)
* Notifier:                              windows-notifier.   (line   10)
* NOW():                                 date-and-time-functions.
                                                             (line  725)
* NOWAIT (START BACKUP command):         mysql-cluster-backup-using-management-client.
                                                             (line   31)
* nowait option, MySQLInstallerConsole:  MySQLInstallerConsole.
                                                             (line   35)
* nowait-nodes option (ndb_mgmd):        mysql-cluster-programs-ndb-mgmd.
                                                             (line  422)
* nowait-nodes option (ndbd):            mysql-cluster-programs-ndbd.
                                                             (line  263)
* nowait-nodes option (ndbmtd):          mysql-cluster-programs-ndbd.
                                                             (line  263)
* nowait-nodes option, ndb_waiter:       mysql-cluster-programs-ndb-waiter.
                                                             (line   98)
* nowarning command, mysql:              mysql-commands.     (line  149)
* NUL <1>:                               load-data.          (line  409)
* NUL:                                   string-literals.    (line   68)
* NULL <1>:                              glossary.           (line 2102)
* NULL <2>:                              problems-with-null. (line    6)
* NULL:                                  working-with-null.  (line    6)
* NULL value <1>:                        null-values.        (line    6)
* NULL value:                            working-with-null.  (line    6)
* NULL values, and AUTO_INCREMENT columns: problems-with-null.
                                                             (line   71)
* NULL values, and indexes:              create-table.       (line  468)
* NULL values, and TIMESTAMP columns:    problems-with-null. (line   71)
* NULL values, vs. empty values:         problems-with-null. (line    6)
* NULL, ORDER BY <1>:                    select.             (line  199)
* NULL, ORDER BY:                        order-by-optimization.
                                                             (line  106)
* NULL, testing for null <1>:            control-flow-functions.
                                                             (line   86)
* NULL, testing for null:                comparison-operators.
                                                             (line   79)
* NULL, thread state:                    general-thread-states.
                                                             (line  179)
* NULLIF():                              control-flow-functions.
                                                             (line  120)
* Numa:                                  mysql-cluster-ndbd-definition.
                                                             (line 2897)
* number-char-cols option, mysqlslap:    mysqlslap.          (line  346)
* number-int-cols option, mysqlslap:     mysqlslap.          (line  351)
* number-of-queries option, mysqlslap:   mysqlslap.          (line  356)
* numbers:                               number-literals.    (line    6)
* NUMERIC data type:                     numeric-type-overview.
                                                             (line  186)
* numeric precision:                     data-types.         (line   32)
* numeric scale:                         data-types.         (line   38)
* numeric types:                         storage-requirements.
                                                             (line   83)
* numeric-dump-file option, resolve_stack_dump: resolve-stack-dump.
                                                             (line   25)
* NumGeometries():                       geometrycollection-property-functions.
                                                             (line   21)
* NumInteriorRings():                    polygon-property-functions.
                                                             (line   49)
* NumPoints():                           linestring-property-functions.
                                                             (line   68)
* NVARCHAR data type:                    string-type-overview.
                                                             (line  121)
* obtaining information about partitions: partitioning-info. (line    6)
* OCT():                                 string-functions.   (line  496)
* OCTET_LENGTH():                        string-functions.   (line  505)
* ODBC:                                  connector-odbc.     (line   17)
* ODBC compatibility <1>:                join.               (line  147)
* ODBC compatibility <2>:                create-table.       (line  299)
* ODBC compatibility <3>:                comparison-operators.
                                                             (line  153)
* ODBC compatibility <4>:                type-conversion.    (line   44)
* ODBC compatibility <5>:                numeric-type-overview.
                                                             (line  255)
* ODBC compatibility <6>:                identifier-qualifiers.
                                                             (line   48)
* ODBC compatibility:                    server-system-variables.
                                                             (line 5520)
* ODBC.NET:                              connector-odbc-examples-programming-net.
                                                             (line   11)
* ODBC_INCLUDES= option, CMake:          source-configuration-options.
                                                             (line  323)
* ODBC_LIB_DIR option, CMake:            source-configuration-options.
                                                             (line  328)
* ODirect:                               mysql-cluster-ndbd-definition.
                                                             (line 1536)
* off-page column:                       glossary.           (line 2131)
* offset option, mysqlbinlog:            mysqlbinlog.        (line  384)
* OLAP:                                  group-by-modifiers. (line    6)
* old system variable:                   server-system-variables.
                                                             (line 4040)
* old-alter-table option, mysqld:        server-options.     (line 1469)
* old-style-user-limits option, mysqld:  server-options.     (line 1494)
* old_alter_table system variable:       server-system-variables.
                                                             (line 4065)
* OLD_PASSWORD():                        encryption-functions.
                                                             (line  321)
* old_passwords system variable:         server-system-variables.
                                                             (line 4090)
* old_server option, mysqlaccess:        mysqlaccess.        (line  103)
* old_server option, mysqlhotcopy:       mysqlhotcopy.       (line  156)
* OLTP:                                  glossary.           (line 2137)
* ON DUPLICATE KEY UPDATE:               insert.             (line   12)
* one-database option, mysql:            mysql-command-options.
                                                             (line  364)
* one-thread option, mysqld:             server-options.     (line 1511)
* one_shot system variable:              server-system-variables.
                                                             (line 4137)
* online:                                glossary.           (line 2150)
* online DDL:                            glossary.           (line 2159)
* online location of manual:             manual-info.        (line    6)
* online upgrades and downgrades (MySQL Cluster): mysql-cluster-rolling-restart.
                                                             (line    6)
* online upgrades and downgrades (MySQL Cluster), order of node updates: mysql-cluster-rolling-restart.
                                                             (line  102)
* only-print option, mysqlslap:          mysqlslap.          (line  367)
* ONLY_FULL_GROUP_BY SQL mode:           server-sql-mode.    (line  330)
* ONLY_FULL_GROUP_BY, SQL mode:          group-by-extensions.
                                                             (line    6)
* OPEN:                                  open.               (line    6)
* Open Source, defined:                  what-is-mysql.      (line   54)
* open tables <1>:                       table-cache.        (line    6)
* open tables:                           mysqladmin.         (line  200)
* open-files-limit option, mysqld:       server-options.     (line 1526)
* open-files-limit option, mysqld_safe:  mysqld-safe.        (line  230)
* open_files_limit system variable:      server-system-variables.
                                                             (line 4142)
* open_files_limit variable:             mysqlbinlog.        (line  549)
* OpenGIS:                               gis-introduction.   (line    6)
* Opening master dump table, thread state: slave-connection-thread-states.
                                                             (line   18)
* Opening mysql.ndb_apply_status, thread state: mysql-cluster-thread-states.
                                                             (line    8)
* Opening table, thread state:           general-thread-states.
                                                             (line  193)
* Opening tables, thread state:          general-thread-states.
                                                             (line  193)
* opening, tables:                       table-cache.        (line    6)
* opens:                                 mysqladmin.         (line  191)
* OpenSSL <1>:                           configuring-for-ssl.
                                                             (line    6)
* OpenSSL:                               ssl-connections.    (line   14)
* operating systems, file-size limits:   table-size-limit.   (line    6)
* operating systems, supported:          supported-os.       (line    6)
* operations, arithmetic:                arithmetic-functions.
                                                             (line   55)
* operators:                             functions.          (line   27)
* operators, assignment <1>:             assignment-operators.
                                                             (line    6)
* operators, assignment:                 user-variables.     (line    6)
* operators, cast <1>:                   cast-functions.     (line    6)
* operators, cast:                       arithmetic-functions.
                                                             (line    6)
* operators, logical:                    logical-operators.  (line    6)
* operators, precedence:                 operator-precedence.
                                                             (line    6)
* opt option, mysqldump:                 mysqldump.          (line  875)
* optimistic:                            glossary.           (line 2180)
* optimization:                          optimization.       (line   21)
* optimization, benchmarking:            optimize-benchmarking.
                                                             (line   14)
* optimization, BLOB types:              optimize-blob.      (line    6)
* optimization, buffering and caching:   buffering-caching.  (line   12)
* optimization, character and string types: optimize-character.
                                                             (line    6)
* optimization, data size:               data-size.          (line    6)
* optimization, DELETE statements:       delete-speed.       (line    6)
* optimization, disk I/O:                disk-issues.        (line   10)
* optimization, DML statements:          non-select-optimization.
                                                             (line   12)
* optimization, foreign keys:            optimizing-foreign-keys.
                                                             (line    6)
* optimization, full table scans:        how-to-avoid-table-scan.
                                                             (line    6)
* optimization, indexes:                 optimization-indexes.
                                                             (line   17)
* optimization, INFORMATION_SCHEMA queries: information-schema-optimization.
                                                             (line    6)
* optimization, InnoDB tables:           optimizing-innodb.  (line   18)
* optimization, INSERT statements:       insert-speed.       (line    6)
* optimization, locking:                 locking-issues.     (line   14)
* optimization, many tables:             optimize-multi-tables.
                                                             (line   12)
* optimization, MEMORY tables:           optimizing-memory-tables.
                                                             (line    6)
* optimization, memory usage:            optimizing-memory.  (line   11)
* optimization, MyISAM tables:           optimizing-myisam.  (line   12)
* optimization, network usage:           optimizing-network. (line   11)
* optimization, numeric types:           optimize-numeric.   (line    6)
* optimization, PERFORMANCE_SCHEMA:      monitoring-performance-schema.
                                                             (line    6)
* optimization, primary keys:            optimizing-primary-keys.
                                                             (line    6)
* optimization, privileges:              permission-optimization.
                                                             (line    6)
* optimization, SELECT statements:       select-optimization.
                                                             (line   25)
* optimization, SQL statements:          statement-optimization.
                                                             (line   14)
* optimization, subquery:                subquery-optimization-with-exists.
                                                             (line    6)
* optimization, tips:                    miscellaneous-optimization-tips.
                                                             (line    6)
* optimization, UPDATE statements:       update-speed.       (line    6)
* optimization, WHERE clauses:           where-optimizations.
                                                             (line    6)
* optimizations:                         index-merge-optimization.
                                                             (line   12)
* optimizations, LIMIT clause:           limit-optimization. (line    6)
* optimize option, mysqlcheck:           mysqlcheck.         (line  330)
* OPTIMIZE TABLE:                        optimize-table.     (line    6)
* OPTIMIZE TABLE, and partitioning:      partitioning-maintenance.
                                                             (line    6)
* optimizer:                             glossary.           (line 2205)
* optimizer statistics estimation <1>:   innodb-other-changes-statistics-estimation.
                                                             (line    6)
* optimizer statistics estimation:       innodb-other-changes-innodb_stats_on_metadata.
                                                             (line    6)
* optimizer, and replication:            replication-features-optimizer.
                                                             (line    6)
* optimizer, controlling:                controlling-optimizer.
                                                             (line   11)
* optimizer, query plan evaluation:      controlling-query-plan-evaluation.
                                                             (line    6)
* optimizer, switchable optimizations:   switchable-optimizations.
                                                             (line    6)
* optimizer_prune_level system variable: server-system-variables.
                                                             (line 4167)
* optimizer_search_depth system variable: server-system-variables.
                                                             (line 4190)
* optimizer_switch system variable <1>:  switchable-optimizations.
                                                             (line    6)
* optimizer_switch system variable:      server-system-variables.
                                                             (line 4220)
* optimizing, DISTINCT:                  distinct-optimization.
                                                             (line    6)
* optimizing, filesort:                  order-by-optimization.
                                                             (line  132)
* optimizing, GROUP BY:                  group-by-optimization.
                                                             (line   11)
* optimizing, LEFT JOIN:                 left-join-optimization.
                                                             (line    6)
* optimizing, server configuration:      optimizing-the-server.
                                                             (line   15)
* optimizing, tables:                    myisam-optimization.
                                                             (line    6)
* optimizing, thread state:              general-thread-states.
                                                             (line  202)
* option:                                glossary.           (line 2209)
* option file:                           glossary.           (line 2215)
* option files <1>:                      access-denied.      (line  101)
* option files:                          option-files.       (line    6)
* option files, escape sequences:        option-files.       (line  170)
* option prefix, -disable:               option-modifiers.   (line    6)
* option prefix, -enable:                option-modifiers.   (line    6)
* option prefix, -loose:                 option-modifiers.   (line    6)
* option prefix, -maximum:               option-modifiers.   (line    6)
* option prefix, -skip:                  option-modifiers.   (line    6)
* options, boolean:                      option-modifiers.   (line    6)
* options, CMake:                        source-configuration-options.
                                                             (line    6)
* options, command-line, mysql:          mysql-command-options.
                                                             (line    6)
* options, command-line, mysqladmin:     mysqladmin.         (line  221)
* options, embedded server:              libmysqld-options.  (line    6)
* options, libmysqld:                    libmysqld-options.  (line    6)
* options, myisamchk:                    myisamchk-general-options.
                                                             (line    6)
* options, provided by MySQL:            tutorial.           (line   16)
* options, replication:                  replication-features.
                                                             (line   45)
* OR <1>:                                index-merge-optimization.
                                                             (line   12)
* OR:                                    searching-on-two-keys.
                                                             (line    6)
* OR Index Merge optimization:           index-merge-optimization.
                                                             (line   12)
* OR, bitwise:                           bit-functions.      (line   20)
* OR, logical:                           logical-operators.  (line   65)
* Oracle compatibility <1>:              explain.            (line   53)
* Oracle compatibility <2>:              alter-table.        (line  312)
* Oracle compatibility <3>:              group-by-functions. (line  240)
* Oracle compatibility:                  extensions-to-ansi. (line   96)
* ORACLE SQL mode:                       server-sql-mode.    (line  538)
* ORD():                                 string-functions.   (line  509)
* ORDER BY <1>:                          select.             (line  171)
* ORDER BY <2>:                          alter-table.        (line  394)
* ORDER BY:                              sorting-rows.       (line    6)
* ORDER BY, NULL <1>:                    select.             (line  199)
* ORDER BY, NULL:                        order-by-optimization.
                                                             (line  106)
* order option, ndb_select_all:          mysql-cluster-programs-ndb-select-all.
                                                             (line   87)
* order-by-primary option, mysqldump:    mysqldump.          (line  889)
* Out of resources error, and partitioned tables: partitioning-limitations.
                                                             (line  222)
* out-of-range handling:                 out-of-range-and-overflow.
                                                             (line    6)
* out_dir option, comp_err:              comp-err.           (line   56)
* out_file option, comp_err:             comp-err.           (line   61)
* OUTFILE:                               select-into.        (line   47)
* overflow handling:                     out-of-range-and-overflow.
                                                             (line    6)
* overflow page:                         glossary.           (line 2219)
* Overlaps():                            functions-that-test-spatial-relationships-between-geometries.
                                                             (line   53)
* OverloadLimit <1>:                     mysql-cluster-sci-definition.
                                                             (line  185)
* OverloadLimit:                         mysql-cluster-tcp-definition.
                                                             (line   86)
* overview:                              introduction.       (line   18)
* packages, list of:                     packages.           (line    6)
* PAD_CHAR_TO_FULL_LENGTH SQL mode:      server-sql-mode.    (line  368)
* page:                                  glossary.           (line 2225)
* page cleaner:                          glossary.           (line 2244)
* page size:                             glossary.           (line 2248)
* page size, InnoDB <1>:                 innodb-restrictions.
                                                             (line   86)
* page size, InnoDB:                     innodb-physical-structure.
                                                             (line    6)
* pager command, mysql:                  mysql-commands.     (line  153)
* pager option, mysql:                   mysql-command-options.
                                                             (line  407)
* PAM authentication, with Connector/J:  connector-j-using-pam.
                                                             (line    6)
* PAM, pluggable authentication:         pam-authentication-plugin.
                                                             (line   12)
* parallel-recover option, myisamchk:    myisamchk-repair-options.
                                                             (line   66)
* parallelism option (ndb_restore):      mysql-cluster-programs-ndb-restore.
                                                             (line  595)
* PARAMETERS, INFORMATION_SCHEMA table:  parameters-table.   (line    6)
* parameters, server:                    server-parameters.  (line    6)
* parent table:                          glossary.           (line 2272)
* parentheses ( and ):                   operator-precedence.
                                                             (line   48)
* parsable option, ndb_show_tables:      mysql-cluster-programs-ndb-show-tables.
                                                             (line   59)
* partial backup:                        glossary.           (line 2280)
* partial index:                         glossary.           (line 2284)
* partial trust:                         connector-net-medium-trust.
                                                             (line   12)
* partial updates, and replication:      replication-features-slaveerrors.
                                                             (line    6)
* PARTITION:                             partitioning.       (line   14)
* PARTITION BY LIST COLUMNS:             partitioning-columns.
                                                             (line   11)
* PARTITION BY RANGE COLUMNS:            partitioning-columns.
                                                             (line   11)
* partition management:                  partitioning-management.
                                                             (line   13)
* partition option, mysqld:              server-options.     (line 1559)
* partition pruning:                     partitioning-pruning.
                                                             (line    6)
* partitioning:                          partitioning.       (line   14)
* partitioning information statements:   partitioning-info.  (line    6)
* partitioning keys and primary keys:    partitioning-limitations-partitioning-keys-unique-keys.
                                                             (line    6)
* partitioning keys and unique keys:     partitioning-limitations-partitioning-keys-unique-keys.
                                                             (line    6)
* partitioning, advantages:              partitioning-overview.
                                                             (line  142)
* partitioning, and dates:               partitioning-types. (line   53)
* partitioning, and foreign keys:        partitioning-limitations.
                                                             (line  263)
* partitioning, and FULLTEXT indexes:    partitioning-limitations.
                                                             (line  289)
* partitioning, and key cache:           partitioning-limitations.
                                                             (line  254)
* partitioning, and query cache:         partitioning-limitations.
                                                             (line  247)
* partitioning, and replication:         replication-features-sql-mode.
                                                             (line    6)
* partitioning, and SQL mode <1>:        partitioning-limitations.
                                                             (line   48)
* partitioning, and SQL mode:            replication-features-sql-mode.
                                                             (line    6)
* partitioning, and subqueries:          partitioning-limitations.
                                                             (line  352)
* partitioning, and temporary tables <1>: partitioning-limitations-partitioning-keys-unique-keys.
                                                             (line    6)
* partitioning, and temporary tables:    partitioning-limitations.
                                                             (line  300)
* partitioning, by hash:                 partitioning-hash.  (line   10)
* partitioning, by key:                  partitioning-key.   (line    6)
* partitioning, by linear hash:          partitioning-linear-hash.
                                                             (line    6)
* partitioning, by linear key:           partitioning-key.   (line  103)
* partitioning, by list:                 partitioning-list.  (line    6)
* partitioning, by range:                partitioning-range. (line    6)
* partitioning, COLUMNS:                 partitioning-columns.
                                                             (line   11)
* partitioning, concepts:                partitioning-overview.
                                                             (line    6)
* partitioning, data type of partitioning key: partitioning-limitations.
                                                             (line  310)
* partitioning, enabling:                partitioning.       (line   14)
* partitioning, functions supported in partitioning expressions: partitioning-limitations-functions.
                                                             (line    9)
* partitioning, limitations:             partitioning-limitations.
                                                             (line   13)
* Partitioning, maximum number of partitions: partitioning-limitations.
                                                             (line  222)
* partitioning, operators not permitted in partitioning expressions: partitioning-limitations.
                                                             (line   29)
* partitioning, operators supported in partitioning expressions: partitioning-limitations.
                                                             (line   29)
* partitioning, optimization <1>:        partitioning-pruning.
                                                             (line    6)
* partitioning, optimization:            partitioning-info.  (line   54)
* partitioning, resources:               partitioning.       (line  131)
* partitioning, storage engines (limitations): partitioning-limitations-storage-engines.
                                                             (line    6)
* partitioning, subpartitioning:         partitioning-limitations.
                                                             (line  357)
* partitioning, support:                 partitioning.       (line   14)
* partitioning, support in MySQL Cluster: mysql-cluster-limitations-syntax.
                                                             (line  105)
* partitioning, types:                   partitioning-types. (line   16)
* partitions (MySQL Cluster):            mysql-cluster-nodes-groups.
                                                             (line    6)
* partitions, adding and dropping:       partitioning-management.
                                                             (line   13)
* partitions, analyzing:                 partitioning-maintenance.
                                                             (line    6)
* partitions, checking:                  partitioning-maintenance.
                                                             (line    6)
* PARTITIONS, INFORMATION_SCHEMA table:  partitions-table.   (line    6)
* partitions, managing:                  partitioning-management.
                                                             (line   13)
* partitions, modifying:                 partitioning-management.
                                                             (line   13)
* partitions, optimizing:                partitioning-maintenance.
                                                             (line    6)
* partitions, repairing:                 partitioning-maintenance.
                                                             (line    6)
* partitions, splitting and merging:     partitioning-management.
                                                             (line   13)
* partitions, truncating:                partitioning-management.
                                                             (line   13)
* password encryption, reversibility of: encryption-functions.
                                                             (line  391)
* password option:                       connecting.         (line  137)
* password option, mysql:                mysql-command-options.
                                                             (line  416)
* password option, mysql_convert_table_format: mysql-convert-table-format.
                                                             (line   36)
* password option, mysql_setpermission:  mysql-setpermission.
                                                             (line   37)
* password option, mysqlaccess:          mysqlaccess.        (line  108)
* password option, mysqladmin:           mysqladmin.         (line  386)
* password option, mysqlbinlog:          mysqlbinlog.        (line  388)
* password option, mysqlcheck:           mysqlcheck.         (line  334)
* password option, mysqld_multi:         mysqld-multi.       (line  130)
* password option, mysqldump:            mysqldump.          (line  896)
* password option, mysqlhotcopy:         mysqlhotcopy.       (line  142)
* password option, mysqlimport:          mysqlimport.        (line  241)
* password option, mysqlshow:            mysqlshow.          (line  177)
* password option, mysqlslap:            mysqlslap.          (line  372)
* PASSWORD() <1>:                        ignoring-user.      (line   26)
* PASSWORD() <2>:                        encryption-functions.
                                                             (line  340)
* PASSWORD() <3>:                        assigning-passwords.
                                                             (line    6)
* PASSWORD():                            connection-access.  (line   42)
* password, root user:                   default-privileges. (line    6)
* passwords, administrator guidelines:   password-security-admin.
                                                             (line    6)
* passwords, for users:                  user-names.         (line    6)
* passwords, forgotten:                  resetting-permissions.
                                                             (line   12)
* passwords, hashing:                    password-hashing.   (line    6)
* passwords, logging:                    password-logging.   (line    6)
* passwords, lost:                       resetting-permissions.
                                                             (line   12)
* passwords, resetting:                  resetting-permissions.
                                                             (line   12)
* passwords, security <1>:               privilege-system.   (line   16)
* passwords, security:                   password-security.  (line   14)
* passwords, setting <1>:                set-password.       (line    6)
* passwords, setting <2>:                grant.              (line  424)
* passwords, setting:                    assigning-passwords.
                                                             (line    6)
* passwords, user guidelines:            password-security-user.
                                                             (line    6)
* PATH environment variable <1>:         invoking-programs.  (line   48)
* PATH environment variable <2>:         environment-variables.
                                                             (line   18)
* PATH environment variable:             unix-postinstallation.
                                                             (line   68)
* path name separators, Windows:         option-files.       (line  192)
* pattern matching <1>:                  regexp.             (line    6)
* pattern matching:                      pattern-matching.   (line    6)
* PEP-249 specification for Python:      connector-python.   (line   17)
* performance:                           optimization.       (line   21)
* Performance Schema <1>:                glossary.           (line 2288)
* Performance Schema <2>:                performance-schema. (line   21)
* Performance Schema:                    innodb-performance-schema.
                                                             (line    6)
* Performance Schema, event filtering:   performance-schema-filtering.
                                                             (line   11)
* Performance Schema, memory use:        performance-schema-startup-configuration.
                                                             (line   47)
* performance, benchmarks:               custom-benchmarks.  (line    6)
* performance, disk I/O:                 disk-issues.        (line   10)
* performance, estimating:               estimating-performance.
                                                             (line    6)
* performance_schema database:           performance-schema. (line   21)
* performance_schema database, restrictions: performance-schema-restrictions.
                                                             (line    6)
* performance_schema database, TRUNCATE TABLE <1>: performance-schema-restrictions.
                                                             (line    6)
* performance_schema database, TRUNCATE TABLE: performance-schema-table-characteristics.
                                                             (line   10)
* PERFORMANCE_SCHEMA storage engine:     performance-schema. (line   21)
* performance_schema system variable:    performance-schema-system-variables.
                                                             (line   37)
* performance_schema, cond_instances table: cond-instances-table.
                                                             (line    6)
* performance_schema, events_waits_current table: events-waits-current-table.
                                                             (line    6)
* performance_schema, events_waits_history table: events-waits-history-table.
                                                             (line    6)
* performance_schema, events_waits_history_long table: events-waits-history-long-table.
                                                             (line    6)
* performance_schema, events_waits_summary_by_instance table: event-wait-summary-tables.
                                                             (line    6)
* performance_schema, events_waits_summary_by_thread_by_event_name table: event-wait-summary-tables.
                                                             (line    6)
* performance_schema, events_waits_summary_global_by_event_name table: event-wait-summary-tables.
                                                             (line    6)
* performance_schema, file_instances table: file-instances-table.
                                                             (line    6)
* performance_schema, file_summary_by_event_name table: file-summary-tables.
                                                             (line    6)
* performance_schema, file_summary_by_instance table: file-summary-tables.
                                                             (line    6)
* performance_schema, mutex_instances table: mutex-instances-table.
                                                             (line    6)
* performance_schema, performance_timers table: performance-timers-table.
                                                             (line    6)
* performance_schema, rwlock_instances table: rwlock-instances-table.
                                                             (line    6)
* performance_schema, setup_consumers table: setup-consumers-table.
                                                             (line    6)
* performance_schema, setup_instruments table: setup-instruments-table.
                                                             (line    6)
* performance_schema, setup_timers table: setup-timers-table.
                                                             (line    6)
* performance_schema, threads table:     threads-table.      (line    6)
* performance_schema_events_waits_history_long_size system variable: performance-schema-system-variables.
                                                             (line   59)
* performance_schema_events_waits_history_size system variable: performance-schema-system-variables.
                                                             (line   79)
* performance_schema_max_cond_classes system variable: performance-schema-system-variables.
                                                             (line   99)
* performance_schema_max_cond_instances system variable: performance-schema-system-variables.
                                                             (line  118)
* performance_schema_max_file_classes system variable: performance-schema-system-variables.
                                                             (line  137)
* performance_schema_max_file_handles system variable: performance-schema-system-variables.
                                                             (line  156)
* performance_schema_max_file_instances system variable: performance-schema-system-variables.
                                                             (line  181)
* performance_schema_max_mutex_classes system variable: performance-schema-system-variables.
                                                             (line  200)
* performance_schema_max_mutex_instances system variable: performance-schema-system-variables.
                                                             (line  219)
* performance_schema_max_rwlock_classes system variable: performance-schema-system-variables.
                                                             (line  238)
* performance_schema_max_rwlock_instances system variable: performance-schema-system-variables.
                                                             (line  257)
* performance_schema_max_table_handles system variable: performance-schema-system-variables.
                                                             (line  276)
* performance_schema_max_table_instances system variable: performance-schema-system-variables.
                                                             (line  295)
* performance_schema_max_thread_classes system variable: performance-schema-system-variables.
                                                             (line  314)
* performance_schema_max_thread_instances system variable: performance-schema-system-variables.
                                                             (line  333)
* performance_timers table, performance_schema: performance-timers-table.
                                                             (line    6)
* PERIOD_ADD():                          date-and-time-functions.
                                                             (line  769)
* PERIOD_DIFF():                         date-and-time-functions.
                                                             (line  778)
* Perl API:                              apis-perl.          (line    6)
* Perl DBI/DBD, installation problems:   perl-support-problems.
                                                             (line    6)
* Perl, installing:                      perl-support.       (line   12)
* Perl, installing on Windows:           activestate-perl.   (line    6)
* permission checks, effect on speed:    permission-optimization.
                                                             (line    6)
* perror <1>:                            perror.             (line    6)
* perror:                                programs-overview.  (line  251)
* perror, help option:                   perror.             (line   40)
* perror, ndb option:                    perror.             (line   44)
* perror, silent option:                 perror.             (line   48)
* perror, verbose option:                perror.             (line   52)
* perror, version option:                perror.             (line   57)
* persistent statistics:                 glossary.           (line 2293)
* pessimistic:                           glossary.           (line 2297)
* phantom:                               glossary.           (line 2308)
* phantom rows:                          innodb-next-key-locking.
                                                             (line    6)
* PHP API:                               apis-php.           (line   18)
* physical:                              glossary.           (line 2323)
* physical backup:                       glossary.           (line 2328)
* PI():                                  mathematical-functions.
                                                             (line  325)
* pid-file option, mysql.server:         mysql-server.       (line   44)
* pid-file option, mysqld:               server-options.     (line 1575)
* pid-file option, mysqld_safe:          mysqld-safe.        (line  237)
* pid_file system variable:              server-system-variables.
                                                             (line 4279)
* Ping, thread command:                  thread-commands.    (line   78)
* pipe option:                           connecting.         (line  144)
* pipe option, mysql <1>:                mysqlcheck.         (line  346)
* pipe option, mysql:                    mysql-command-options.
                                                             (line  428)
* pipe option, mysqladmin:               mysqladmin.         (line  398)
* pipe option, mysqldump:                mysqldump.          (line  908)
* pipe option, mysqlimport:              mysqlimport.        (line  253)
* pipe option, mysqlshow:                mysqlshow.          (line  189)
* pipe option, mysqlslap:                mysqlslap.          (line  384)
* PIPES_AS_CONCAT SQL mode:              server-sql-mode.    (line  406)
* PITR:                                  glossary.           (line 2334)
* plan option, mysqlaccess:              mysqlaccess.        (line  117)
* plan stability:                        glossary.           (line 2336)
* pluggable authentication, PAM:         pam-authentication-plugin.
                                                             (line   12)
* pluggable authentication, restrictions: pluggable-authentication-restrictions.
                                                             (line    6)
* pluggable authentication, Windows:     windows-authentication-plugin.
                                                             (line   11)
* plugin:                                glossary.           (line 2340)
* plugin API <1>:                        plugin-api.         (line   14)
* plugin API:                            server-plugins.     (line   11)
* plugin option prefix, mysqld:          server-options.     (line 1597)
* plugin services:                       plugin-services.    (line    6)
* plugin, audit log:                     audit-log-plugin.   (line   15)
* plugin-dir option, mysql:              mysql-command-options.
                                                             (line  433)
* plugin-dir option, mysql_plugin:       mysql-plugin.       (line  125)
* plugin-dir option, mysql_upgrade:      mysql-upgrade.      (line  196)
* plugin-dir option, mysqladmin:         mysqladmin.         (line  403)
* plugin-dir option, mysqlbinlog:        mysqlbinlog.        (line  400)
* plugin-dir option, mysqlcheck:         mysqlcheck.         (line  351)
* plugin-dir option, mysqld_safe:        mysqld-safe.        (line  241)
* plugin-dir option, mysqldump:          mysqldump.          (line  913)
* plugin-dir option, mysqlimport:        mysqlimport.        (line  258)
* plugin-dir option, mysqlshow:          mysqlshow.          (line  194)
* plugin-dir option, mysqlslap:          mysqlslap.          (line  389)
* plugin-ini option, mysql_plugin:       mysql-plugin.       (line  129)
* plugin-load option, mysqld:            server-options.     (line 1622)
* plugin_dir system variable:            server-system-variables.
                                                             (line 4298)
* plugindir option, mysql_config:        mysql-config.       (line   43)
* plugins, activating:                   server-plugin-loading.
                                                             (line    6)
* plugins, adding:                       plugin-api.         (line   14)
* plugins, audit:                        audit-plugins.      (line    6)
* plugins, authentication:               authentication-plugins.
                                                             (line    6)
* plugins, daemon:                       daemon-plugins.     (line    6)
* plugins, full-text parser:             full-text-plugins.  (line    6)
* plugins, INFORMATION_SCHEMA:           information-schema-plugins.
                                                             (line    6)
* PLUGINS, INFORMATION_SCHEMA table:     plugins-table.      (line    6)
* plugins, installing <1>:               install-plugin.     (line    6)
* plugins, installing:                   server-plugin-loading.
                                                             (line    6)
* plugins, semisynchronous replication:  semisynchronous-replication-plugins.
                                                             (line    6)
* plugins, server:                       server-plugins.     (line   11)
* plugins, storage engine:               storage-engine-plugins.
                                                             (line    6)
* plugins, uninstalling <1>:             uninstall-plugin.   (line    6)
* plugins, uninstalling:                 server-plugin-loading.
                                                             (line    6)
* POINT data type:                       mysql-spatial-datatypes.
                                                             (line    6)
* Point():                               gis-mysql-specific-functions.
                                                             (line   45)
* point-in-time recovery <1>:            glossary.           (line 2352)
* point-in-time recovery:                point-in-time-recovery.
                                                             (line   11)
* point-in-time recovery, using MySQL Cluster replication: mysql-cluster-replication-pitr.
                                                             (line    6)
* PointFromText():                       gis-wkt-functions.  (line   45)
* PointFromWKB():                        gis-wkb-functions.  (line   47)
* PointN():                              linestring-property-functions.
                                                             (line   80)
* PointOnSurface():                      multipolygon-property-functions.
                                                             (line   41)
* PolyFromText():                        gis-wkt-functions.  (line   49)
* PolyFromWKB():                         gis-wkb-functions.  (line   51)
* POLYGON data type:                     mysql-spatial-datatypes.
                                                             (line    6)
* Polygon():                             gis-mysql-specific-functions.
                                                             (line   49)
* PolygonFromText():                     gis-wkt-functions.  (line   49)
* PolygonFromWKB():                      gis-wkb-functions.  (line   51)
* port option:                           connecting.         (line  150)
* port option, mysql:                    mysql-command-options.
                                                             (line  442)
* port option, mysql_config:             mysql-config.       (line   48)
* port option, mysql_convert_table_format: mysql-convert-table-format.
                                                             (line   46)
* port option, mysql_setpermission:      mysql-setpermission.
                                                             (line   47)
* port option, mysqladmin:               mysqladmin.         (line  412)
* port option, mysqlbinlog:              mysqlbinlog.        (line  410)
* port option, mysqlcheck:               mysqlcheck.         (line  360)
* port option, mysqld:                   server-options.     (line 1676)
* port option, mysqld_safe:              mysqld-safe.        (line  246)
* port option, mysqldump:                mysqldump.          (line  922)
* port option, mysqlhotcopy:             mysqlhotcopy.       (line  152)
* port option, mysqlimport:              mysqlimport.        (line  268)
* port option, mysqlshow:                mysqlshow.          (line  203)
* port option, mysqlslap:                mysqlslap.          (line  398)
* port system variable:                  server-system-variables.
                                                             (line 4340)
* port-open-timeout option, mysqld:      server-options.     (line 1699)
* portability:                           optimize-overview.  (line  106)
* portability, types:                    other-vendor-data-types.
                                                             (line    6)
* porting, to other systems:             porting.            (line   12)
* PortNumber:                            mysql-cluster-mgm-definition.
                                                             (line   83)
* PortNumber (OBSOLETE):                 mysql-cluster-tcp-definition.
                                                             (line  166)
* ports:                                 security-guidelines.
                                                             (line    6)
* position option, mysqlbinlog:          mysqlbinlog.        (line  414)
* POSITION():                            string-functions.   (line  525)
* post-filtering, Performance Schema:    performance-schema-filtering.
                                                             (line   11)
* post-query option, mysqlslap:          mysqlslap.          (line  402)
* post-system option, mysqlslap:         mysqlslap.          (line  414)
* PostgreSQL compatibility:              extensions-to-ansi. (line  190)
* POSTGRESQL SQL mode:                   server-sql-mode.    (line  544)
* postinstall, multiple servers:         multiple-servers.   (line   13)
* postinstallation, setup and testing:   postinstallation.   (line   11)
* POW():                                 mathematical-functions.
                                                             (line  336)
* POWER():                               mathematical-functions.
                                                             (line  345)
* pre-filtering, Performance Schema:     performance-schema-filtering.
                                                             (line   11)
* pre-query option, mysqlslap:           mysqlslap.          (line  419)
* pre-system option, mysqlslap:          mysqlslap.          (line  425)
* precedence, operator:                  operator-precedence.
                                                             (line    6)
* precision math:                        precision-math.     (line   14)
* precision, arithmetic:                 precision-math.     (line   14)
* precision, numeric:                    data-types.         (line   32)
* preload_buffer_size system variable:   server-system-variables.
                                                             (line 4362)
* PREPARE <1>:                           prepare.            (line    6)
* PREPARE:                               sql-syntax-prepared-statements.
                                                             (line   13)
* Prepare, thread command:               thread-commands.    (line   82)
* PREPARE, XA transactions:              xa-statements.      (line    6)
* prepared backup:                       glossary.           (line 2362)
* prepared statements <1>:               c-api-prepared-statements.
                                                             (line    6)
* prepared statements <2>:               deallocate-prepare. (line    6)
* prepared statements <3>:               execute.            (line    6)
* prepared statements <4>:               prepare.            (line    6)
* prepared statements:                   sql-syntax-prepared-statements.
                                                             (line   13)
* prepared statements, repreparation:    statement-repreparation.
                                                             (line    6)
* prepared statements, with Connector/Net: connector-net-programming-prepared.
                                                             (line   10)
* preparing, thread state:               general-thread-states.
                                                             (line  206)
* preserve-trailing-spaces option (ndb_restore): mysql-cluster-programs-ndb-restore.
                                                             (line  312)
* preview option, mysqlaccess:           mysqlaccess.        (line  121)
* primary key:                           glossary.           (line 2368)
* PRIMARY KEY <1>:                       create-table.       (line  410)
* PRIMARY KEY:                           alter-table.        (line  375)
* primary key, constraint:               constraint-primary-key.
                                                             (line    6)
* primary key, deleting:                 alter-table.        (line  370)
* primary keys, and partitioning keys:   partitioning-limitations-partitioning-keys-unique-keys.
                                                             (line    6)
* print command, mysql:                  mysql-commands.     (line  175)
* print option (ndb_restore):            mysql-cluster-programs-ndb-restore.
                                                             (line  553)
* print-defaults option:                 option-file-options.
                                                             (line   53)
* print-defaults option, mysql_plugin:   mysql-plugin.       (line  137)
* print-full-config option (ndb_mgmd):   mysql-cluster-programs-ndb-mgmd.
                                                             (line  365)
* print_data option (ndb_restore):       mysql-cluster-programs-ndb-restore.
                                                             (line  430)
* print_log option (ndb_restore):        mysql-cluster-programs-ndb-restore.
                                                             (line  548)
* print_meta option (ndb_restore):       mysql-cluster-programs-ndb-restore.
                                                             (line  543)
* privilege checks, effect on speed:     permission-optimization.
                                                             (line    6)
* privilege information, location:       grant-table-structure.
                                                             (line    6)
* privilege system:                      privilege-system.   (line   16)
* privilege, changes:                    privilege-changes.  (line    6)
* privileges, access:                    privilege-system.   (line   16)
* privileges, adding:                    adding-users.       (line    6)
* privileges, and replication:           replication-features-mysqldb.
                                                             (line    6)
* privileges, default:                   default-privileges. (line    6)
* privileges, deleting <1>:              drop-user.          (line    6)
* privileges, deleting:                  removing-users.     (line    6)
* privileges, display:                   show-grants.        (line    6)
* privileges, dropping <1>:              drop-user.          (line    6)
* privileges, dropping:                  removing-users.     (line    6)
* privileges, granting:                  grant.              (line    6)
* privileges, revoking:                  revoke.             (line    6)
* problems, access denied errors:        error-access-denied.
                                                             (line    6)
* problems, common errors:               problems.           (line   17)
* problems, compiling:                   compilation-problems.
                                                             (line    6)
* problems, DATE columns:                using-date.         (line    6)
* problems, date values:                 datetime.           (line   53)
* problems, installing on Solaris:       solaris-installation.
                                                             (line   11)
* problems, installing Perl:             perl-support-problems.
                                                             (line    6)
* problems, linking:                     c-api-building-clients.
                                                             (line   83)
* problems, lost connection errors:      error-lost-connection.
                                                             (line    6)
* problems, ODBC:                        connector-odbc-support.
                                                             (line   12)
* problems, reporting <1>:               bug-reports.        (line    6)
* problems, reporting:                   introduction.       (line   69)
* problems, starting the server:         starting-server.    (line    6)
* problems, table locking:               table-locking.      (line    6)
* problems, time zone:                   timezone-problems.  (line    6)
* PROCEDURE:                             select.             (line  341)
* PROCEDURE ANALYSE():                   procedure-analyse.  (line    8)
* procedures, stored:                    stored-routines.    (line   13)
* process:                               glossary.           (line 2380)
* process management (MySQL Cluster):    mysql-cluster-programs.
                                                             (line   34)
* process support:                       supported-os.       (line    6)
* processes, display:                    show-processlist.   (line    6)
* Processing events from schema table, thread state: mysql-cluster-thread-states.
                                                             (line   14)
* Processing events, thread state:       mysql-cluster-thread-states.
                                                             (line   10)
* processing, arguments:                 udf-arguments.      (line    6)
* PROCESSLIST:                           show-processlist.   (line    6)
* PROCESSLIST, INFORMATION_SCHEMA table: processlist-table.  (line    6)
* PROCESSLIST, possible inconsistency with INFORMATION_SCHEMA tables: innodb-information-schema-note_inconsistency.
                                                             (line    6)
* Processlist, thread command:           thread-commands.    (line   86)
* product option, MySQLInstallerConsole: MySQLInstallerConsole.
                                                             (line   74)
* profiling session variable:            server-system-variables.
                                                             (line 4384)
* PROFILING, INFORMATION_SCHEMA table:   profiling-table.    (line    6)
* profiling_history_size session variable: server-system-variables.
                                                             (line 4392)
* program options (MySQL Cluster):       mysql-cluster-program-options-common.
                                                             (line    6)
* program variables, setting:            program-variables.  (line    6)
* program-development utilities:         programs-overview.  (line  228)
* programs, administrative:              programs-overview.  (line  147)
* programs, client <1>:                  c-api-building-clients.
                                                             (line    6)
* programs, client:                      programs-overview.  (line  106)
* programs, stored <1>:                  stored-programs-views.
                                                             (line   16)
* programs, stored:                      sql-syntax-compound-statements.
                                                             (line   16)
* programs, utility:                     programs-overview.  (line  147)
* progress-frequency option (ndb_restore): mysql-cluster-programs-ndb-restore.
                                                             (line  601)
* promote-attributes option (ndb_restore): mysql-cluster-programs-ndb-restore.
                                                             (line  259)
* prompt command, mysql:                 mysql-commands.     (line  179)
* prompt option, mysql:                  mysql-command-options.
                                                             (line  446)
* prompts, meanings:                     entering-queries.   (line  134)
* pronunciation, MySQL:                  what-is-mysql.      (line  107)
* protocol option:                       connecting.         (line  155)
* protocol option, mysql:                mysql-command-options.
                                                             (line  452)
* protocol option, mysqladmin:           mysqladmin.         (line  416)
* protocol option, mysqlbinlog:          mysqlbinlog.        (line  419)
* protocol option, mysqlcheck:           mysqlcheck.         (line  364)
* protocol option, mysqldump:            mysqldump.          (line  926)
* protocol option, mysqlimport:          mysqlimport.        (line  272)
* protocol option, mysqlshow:            mysqlshow.          (line  207)
* protocol option, mysqlslap:            mysqlslap.          (line  430)
* protocol_version system variable:      server-system-variables.
                                                             (line 4399)
* Proxy:                                 mysql-proxy.        (line   15)
* proxy_user session variable:           server-system-variables.
                                                             (line 4413)
* pseudo-record:                         glossary.           (line 2387)
* pseudo_slave_mode system variable:     server-system-variables.
                                                             (line 4432)
* pseudo_thread_id system variable:      server-system-variables.
                                                             (line 4448)
* Pthreads:                              glossary.           (line 2390)
* purge:                                 glossary.           (line 2394)
* PURGE BINARY LOGS:                     purge-binary-logs.  (line    6)
* purge buffering:                       glossary.           (line 2399)
* purge lag:                             glossary.           (line 2407)
* PURGE MASTER LOGS:                     purge-binary-logs.  (line    6)
* purge scheduling:                      innodb-improved-purge-scheduling.
                                                             (line    6)
* purge thread:                          glossary.           (line 2410)
* Purging old relay logs, thread state:  general-thread-states.
                                                             (line  210)
* Python:                                connector-python.   (line   17)
* Python, third-party driver:            apis-python.        (line    6)
* QUARTER():                             date-and-time-functions.
                                                             (line  787)
* queries, entering:                     entering-queries.   (line    6)
* queries, estimating performance:       estimating-performance.
                                                             (line    6)
* queries, examples:                     examples.           (line   18)
* queries, speed of:                     select-optimization.
                                                             (line   25)
* query:                                 glossary.           (line 2416)
* Query Cache:                           query-cache.        (line   13)
* query cache, and ndbinfo database tables: mysql-cluster-ndbinfo.
                                                             (line  192)
* query cache, and partitioned tables:   partitioning-limitations.
                                                             (line  247)
* query cache, thread states:            query-cache-thread-states.
                                                             (line    6)
* query end, thread state:               general-thread-states.
                                                             (line  214)
* query execution plan <1>:              glossary.           (line 2426)
* query execution plan:                  execution-plan-information.
                                                             (line   14)
* query option (ndb_index_stat):         mysql-cluster-programs-ndb-index-stat.
                                                             (line  180)
* query option, mysqlslap:               mysqlslap.          (line  437)
* query option, ndb_config:              mysql-cluster-programs-ndb-config.
                                                             (line  183)
* Query, thread command:                 thread-commands.    (line   90)
* query_alloc_block_size system variable: server-system-variables.
                                                             (line 4462)
* query_cache_limit system variable:     server-system-variables.
                                                             (line 4498)
* query_cache_min_res_unit system variable: server-system-variables.
                                                             (line 4527)
* query_cache_size system variable:      server-system-variables.
                                                             (line 4559)
* query_cache_type system variable:      server-system-variables.
                                                             (line 4599)
* query_cache_wlock_invalidate system variable: server-system-variables.
                                                             (line 4644)
* query_prealloc_size system variable:   server-system-variables.
                                                             (line 4669)
* questions:                             mysqladmin.         (line  181)
* questions, answering:                  mailing-list-use.   (line    6)
* Queueing master event to the relay log, thread state: slave-io-thread-states.
                                                             (line   57)
* quick option, myisamchk:               myisamchk-repair-options.
                                                             (line   72)
* quick option, mysql:                   mysql-command-options.
                                                             (line  459)
* quick option, mysqlcheck:              mysqlcheck.         (line  371)
* quick option, mysqldump:               mysqldump.          (line  933)
* quiesce:                               glossary.           (line 2432)
* quiet option, mysqlhotcopy:            mysqlhotcopy.       (line  164)
* QUIT command (MySQL Cluster):          mysql-cluster-mgm-client-commands.
                                                             (line  176)
* quit command, mysql:                   mysql-commands.     (line  188)
* Quit, thread command:                  thread-commands.    (line   94)
* quotation marks, in strings:           string-literals.    (line   93)
* QUOTE() <1>:                           mysql-real-escape-string.
                                                             (line   17)
* QUOTE() <2>:                           string-functions.   (line  529)
* QUOTE():                               string-literals.    (line  141)
* quote-names option, mysqldump:         mysqldump.          (line  940)
* quoting:                               string-literals.    (line  141)
* quoting binary data:                   string-literals.    (line  131)
* quoting of identifiers:                identifiers.        (line   20)
* quoting, column alias <1>:             problems-with-alias.
                                                             (line    6)
* quoting, column alias:                 identifiers.        (line   78)
* RADIANS():                             mathematical-functions.
                                                             (line  349)
* RAID:                                  glossary.           (line 2443)
* RAND():                                mathematical-functions.
                                                             (line  357)
* rand_seed1 session variable:           server-system-variables.
                                                             (line 4707)
* rand_seed2 session variable:           server-system-variables.
                                                             (line 4721)
* random dive:                           glossary.           (line 2448)
* range join type, optimizer:            explain-output.     (line  343)
* range partitioning <1>:                partitioning-columns.
                                                             (line   11)
* range partitioning:                    partitioning-range. (line    6)
* range partitions, adding and dropping: partitioning-management-range-list.
                                                             (line    6)
* range partitions, managing:            partitioning-management-range-list.
                                                             (line    6)
* range_alloc_block_size system variable: server-system-variables.
                                                             (line 4725)
* raw backup:                            glossary.           (line 2460)
* raw option, mysql:                     mysql-command-options.
                                                             (line  465)
* raw partitions:                        innodb-raw-devices. (line    6)
* re-creating, grant tables:             mysql-install-db-problems.
                                                             (line  104)
* read ahead:                            innodb-other-changes-readahead-counters.
                                                             (line    6)
* READ COMMITTED:                        glossary.           (line 2466)
* READ COMMITTED, transaction isolation level: set-transaction.
                                                             (line  115)
* READ UNCOMMITTED:                      glossary.           (line 2480)
* READ UNCOMMITTED, transaction isolation level: set-transaction.
                                                             (line  141)
* read view:                             glossary.           (line 2492)
* read-ahead:                            glossary.           (line 2498)
* read-ahead, linear:                    innodb-performance-read_ahead.
                                                             (line    6)
* read-ahead, random:                    innodb-performance-read_ahead.
                                                             (line    6)
* read-from-remote-server option, mysqlbinlog: mysqlbinlog.  (line  426)
* read-only option, myisamchk:           myisamchk-check-options.
                                                             (line   55)
* read-only option, mysqld:              replication-options-slave.
                                                             (line  277)
* read-only transaction:                 glossary.           (line 2510)
* read_buffer_size myisamchk variable:   myisamchk-general-options.
                                                             (line   53)
* read_buffer_size system variable:      server-system-variables.
                                                             (line 4759)
* read_only system variable:             server-system-variables.
                                                             (line 4806)
* read_rnd_buffer_size system variable:  server-system-variables.
                                                             (line 4877)
* Reading event from the relay log, thread state: slave-sql-thread-states.
                                                             (line   13)
* Reading from net, thread state:        general-thread-states.
                                                             (line  219)
* Reading master dump table data, thread state: slave-connection-thread-states.
                                                             (line   22)
* REAL data type:                        numeric-type-overview.
                                                             (line  231)
* REAL_AS_FLOAT SQL mode:                server-sql-mode.    (line  411)
* RealtimeScheduler:                     mysql-cluster-ndbd-definition.
                                                             (line 2804)
* rebuild-indexes option (ndb_restore):  mysql-cluster-programs-ndb-restore.
                                                             (line  822)
* Rebuilding the index on master dump table, thread state: slave-connection-thread-states.
                                                             (line   26)
* ReceiveBufferMemory:                   mysql-cluster-tcp-definition.
                                                             (line  173)
* reconfiguring:                         compilation-problems.
                                                             (line    6)
* reconnect option, mysql:               mysql-command-options.
                                                             (line  496)
* Reconnecting after a failed binlog dump request, thread state: slave-io-thread-states.
                                                             (line   45)
* Reconnecting after a failed master event read, thread state: slave-io-thread-states.
                                                             (line   69)
* reconnection, automatic:               auto-reconnect.     (line    6)
* record lock:                           glossary.           (line 2519)
* record-level locks, InnoDB <1>:        innodb-next-key-locking.
                                                             (line    6)
* record-level locks, InnoDB <2>:        innodb-record-level-locks.
                                                             (line    6)
* record-level locks, InnoDB <3>:        innodb-transaction-model.
                                                             (line   71)
* record-level locks, InnoDB:            innodb-parameters.  (line 1173)
* record_log_pos option, mysqlhotcopy:   mysqlhotcopy.       (line  168)
* recover option, myisamchk:             myisamchk-repair-options.
                                                             (line   79)
* RECOVER, XA transactions:              xa-statements.      (line    6)
* recovery, from crash:                  myisam-crash-recovery.
                                                             (line    6)
* recovery, incremental:                 point-in-time-recovery.
                                                             (line   11)
* recovery, point in time:               point-in-time-recovery.
                                                             (line   11)
* redo:                                  glossary.           (line 2524)
* redo log <1>:                          glossary.           (line 2530)
* redo log:                              innodb-data-log-reconfiguration.
                                                             (line    6)
* RedoBuffer:                            mysql-cluster-ndbd-definition.
                                                             (line 2371)
* RedoOverCommitCounter, data nodes:     mysql-cluster-ndbd-definition.
                                                             (line 3632)
* RedoOverCommitLimit, data nodes:       mysql-cluster-ndbd-definition.
                                                             (line 3652)
* reducing, data size:                   data-size.          (line    6)
* redundant row format:                  glossary.           (line 2550)
* ref join type, optimizer:              explain-output.     (line  278)
* ref_or_null:                           is-null-optimization.
                                                             (line    6)
* ref_or_null join type, optimizer:      explain-output.     (line  304)
* references:                            alter-table.        (line  445)
* referential integrity <1>:             glossary.           (line 2556)
* referential integrity <2>:             innodb-default-se.  (line    6)
* referential integrity:                 innodb-storage-engine.
                                                             (line   24)
* REFERENTIAL_CONSTRAINTS, INFORMATION_SCHEMA table: referential-constraints-table.
                                                             (line    6)
* Refresh, thread command:               thread-commands.    (line   98)
* REGEXP:                                regexp.             (line   32)
* REGEXP operator:                       regexp.             (line    6)
* regexp option, mysql_find_rows:        mysql-find-rows.    (line   32)
* regexp option, mysqlhotcopy:           mysqlhotcopy.       (line  173)
* Register Slave, thread command:        thread-commands.    (line  103)
* Registering slave on master, thread state: slave-io-thread-states.
                                                             (line   25)
* regular expression syntax:             regexp.             (line    6)
* rehash command, mysql:                 mysql-commands.     (line  192)
* relational:                            glossary.           (line 2565)
* relational databases, defined:         what-is-mysql.      (line   54)
* relative option, mysqladmin:           mysqladmin.         (line  423)
* relay-log option, mysqld:              replication-options-slave.
                                                             (line  299)
* relay-log-index option, mysqld:        replication-options-slave.
                                                             (line  357)
* relay-log-info-file option, mysqld:    replication-options-slave.
                                                             (line  392)
* relay-log-purge option, mysqld:        replication-options-slave.
                                                             (line  410)
* relay-log-recovery option, mysqld:     replication-options-slave.
                                                             (line  431)
* relay-log-space-limit option, mysqld:  replication-options-slave.
                                                             (line  450)
* relay_log system variable:             replication-options-slave.
                                                             (line 1228)
* relay_log_index system variable:       replication-options-slave.
                                                             (line 1246)
* relay_log_info_file system variable:   replication-options-slave.
                                                             (line 1266)
* relay_log_purge system variable:       server-system-variables.
                                                             (line 4911)
* relay_log_recovery system variable:    replication-options-slave.
                                                             (line 1286)
* relay_log_space_limit system variable: server-system-variables.
                                                             (line 4930)
* release notes:                         news.               (line    6)
* release numbers:                       which-version.      (line   18)
* RELEASE SAVEPOINT:                     savepoint.          (line    6)
* RELEASE_LOCK():                        miscellaneous-functions.
                                                             (line  204)
* releases, naming scheme:               choosing-version.   (line   56)
* releases, testing:                     choosing-version.   (line  110)
* releases, updating:                    many-versions.      (line    6)
* relevance:                             glossary.           (line 2590)
* relnotes option, mysqlaccess:          mysqlaccess.        (line  126)
* reload option (ndb_mgmd):              mysql-cluster-programs-ndb-mgmd.
                                                             (line  385)
* remote administration (MySQL Cluster), and security issues: mysql-cluster-security-networking-issues.
                                                             (line  193)
* remove option (ndb_mgmd):              mysql-cluster-programs-ndb-mgmd.
                                                             (line  609)
* remove option (ndbd):                  mysql-cluster-programs-ndbd.
                                                             (line  348)
* remove option (ndbmtd):                mysql-cluster-programs-ndbd.
                                                             (line  348)
* remove option, mysqld:                 server-options.     (line 1718)
* Removing duplicates, thread state:     general-thread-states.
                                                             (line  223)
* removing tmp table, thread state:      general-thread-states.
                                                             (line  230)
* rename result table, thread state:     general-thread-states.
                                                             (line  240)
* RENAME TABLE:                          rename-table.       (line    6)
* RENAME USER:                           rename-user.        (line    6)
* rename, thread state:                  general-thread-states.
                                                             (line  236)
* renaming user accounts:                rename-user.        (line    6)
* Reopen tables, thread state:           general-thread-states.
                                                             (line  246)
* Repair by sorting, thread state:       general-thread-states.
                                                             (line  252)
* Repair done, thread state:             general-thread-states.
                                                             (line  256)
* repair option, mysqlcheck:             mysqlcheck.         (line  380)
* repair options, myisamchk:             myisamchk-repair-options.
                                                             (line    6)
* REPAIR TABLE:                          repair-table.       (line    6)
* REPAIR TABLE, and partitioning:        partitioning-maintenance.
                                                             (line    6)
* REPAIR TABLE, and replication <1>:     replication-features-repair-table.
                                                             (line    6)
* REPAIR TABLE, and replication:         repair-table.       (line  125)
* Repair with keycache, thread state:    general-thread-states.
                                                             (line  261)
* repair, tables:                        mysqlcheck.         (line    6)
* repairing, tables:                     myisam-repair.      (line    6)
* REPEAT:                                repeat.             (line    6)
* REPEAT():                              string-functions.   (line  548)
* REPEAT, labels:                        statement-labels.   (line    6)
* REPEATABLE READ:                       glossary.           (line 2596)
* REPEATABLE READ, transaction isolation level: set-transaction.
                                                             (line   93)
* repertoire, character set <1>:         charset-unicode-utf8.
                                                             (line   34)
* repertoire, character set:             charset-repertoire. (line    6)
* REPLACE:                               replace.            (line    6)
* replace:                               programs-overview.  (line  256)
* replace option, mysqldump:             mysqldump.          (line  949)
* replace option, mysqlimport:           mysqlimport.        (line  279)
* replace utility:                       replace-utility.    (line    6)
* REPLACE():                             string-functions.   (line  557)
* replicas (MySQL Cluster):              mysql-cluster-nodes-groups.
                                                             (line    6)
* replicate-do-db option, mysqld:        replication-options-slave.
                                                             (line  495)
* replicate-do-table option, mysqld:     replication-options-slave.
                                                             (line  679)
* replicate-ignore-db option, mysqld:    replication-options-slave.
                                                             (line  610)
* replicate-ignore-table option, mysqld: replication-options-slave.
                                                             (line  701)
* replicate-rewrite-db option, mysqld:   replication-options-slave.
                                                             (line  724)
* replicate-same-server-id option, mysqld: replication-options-slave.
                                                             (line  773)
* replicate-wild-do-table option, mysqld: replication-options-slave.
                                                             (line  797)
* replicate-wild-ignore-table option, mysqld: replication-options-slave.
                                                             (line  844)
* replication <1>:                       glossary.           (line 2608)
* replication:                           replication.        (line   13)
* replication filtering options, and case sensitivity: replication-rules.
                                                             (line   56)
* replication formats, compared:         replication-sbr-rbr.
                                                             (line    6)
* replication implementation:            replication-implementation.
                                                             (line   12)
* replication limitations:               replication-features.
                                                             (line   45)
* replication master, thread states:     master-thread-states.
                                                             (line    6)
* replication masters, statements:       replication-master-sql.
                                                             (line   12)
* replication options:                   replication-features.
                                                             (line   45)
* replication slave, thread states <1>:  slave-connection-thread-states.
                                                             (line    6)
* replication slave, thread states <2>:  slave-sql-thread-states.
                                                             (line    6)
* replication slave, thread states:      slave-io-thread-states.
                                                             (line    6)
* replication slaves, statements:        replication-slave-sql.
                                                             (line   15)
* replication, and AUTO_INCREMENT:       replication-features-auto-increment.
                                                             (line    6)
* replication, and character sets:       replication-features-charset.
                                                             (line    6)
* replication, and CREATE ... IF NOT EXISTS: replication-features-create-if-not-exists.
                                                             (line    6)
* replication, and CREATE TABLE ... SELECT: replication-features-create-select.
                                                             (line    6)
* replication, and DATA DIRECTORY:       replication-features-directory.
                                                             (line    6)
* replication, and DROP ... IF EXISTS:   replication-features-drop-if-exists.
                                                             (line    6)
* replication, and errors on slave:      replication-features-slaveerrors.
                                                             (line    6)
* replication, and floating-point values: replication-features-floatvalues.
                                                             (line    6)
* replication, and FLUSH:                replication-features-flush.
                                                             (line    6)
* replication, and functions:            replication-features-functions.
                                                             (line    6)
* replication, and INDEX DIRECTORY:      replication-features-directory.
                                                             (line    6)
* replication, and invoked features:     replication-features-invoked.
                                                             (line    6)
* replication, and LAST_INSERT_ID():     replication-features-auto-increment.
                                                             (line    6)
* replication, and LIMIT:                replication-features-limit.
                                                             (line    6)
* replication, and LOAD DATA:            replication-features-load-data.
                                                             (line    6)
* replication, and max_allowed_packet:   replication-features-max-allowed-packet.
                                                             (line    6)
* replication, and MEMORY tables:        replication-features-memory.
                                                             (line    6)
* replication, and mysql (system) database: replication-features-mysqldb.
                                                             (line    6)
* replication, and partial updates:      replication-features-slaveerrors.
                                                             (line    6)
* replication, and partitioning:         replication-features-sql-mode.
                                                             (line    6)
* replication, and privileges:           replication-features-mysqldb.
                                                             (line    6)
* replication, and query optimizer:      replication-features-optimizer.
                                                             (line    6)
* replication, and REPAIR TABLE statement <1>: replication-features-repair-table.
                                                             (line    6)
* replication, and REPAIR TABLE statement: repair-table.     (line  125)
* replication, and reserved words:       replication-features-reserved-words.
                                                             (line    6)
* replication, and scheduled events:     replication-features-invoked.
                                                             (line    6)
* replication, and slow query log:       replication-features-logging.
                                                             (line    6)
* replication, and SQL mode:             replication-features-sql-mode.
                                                             (line    6)
* replication, and stored routines:      replication-features-invoked.
                                                             (line    6)
* replication, and temporary tables:     replication-features-temptables.
                                                             (line    6)
* replication, and time zones:           replication-features-timezone.
                                                             (line    6)
* replication, and TIMESTAMP <1>:        replication-features-timestamp.
                                                             (line    6)
* replication, and TIMESTAMP <2>:        replication-features-auto-increment.
                                                             (line    6)
* replication, and TIMESTAMP:            upgrading-from-previous-series.
                                                             (line  320)
* replication, and transactions <1>:     replication-features-transactions.
                                                             (line    6)
* replication, and transactions:         replication-features-timeout.
                                                             (line    6)
* replication, and triggers <1>:         replication-features-triggers.
                                                             (line    6)
* replication, and triggers:             replication-features-invoked.
                                                             (line    6)
* replication, and TRUNCATE TABLE:       replication-features-truncate.
                                                             (line    6)
* replication, and variables:            replication-features-variables.
                                                             (line    6)
* replication, and views:                replication-features-views.
                                                             (line    6)
* replication, asynchronous:             mysql-cluster-replication.
                                                             (line   20)
* replication, attribute demotion:       replication-features-different-data-types.
                                                             (line    6)
* replication, attribute promotion:      replication-features-different-data-types.
                                                             (line    6)
* replication, between MySQL server versions <1>: replication-features-timestamp.
                                                             (line    6)
* replication, between MySQL server versions: upgrading-from-previous-series.
                                                             (line  320)
* replication, BLACKHOLE:                replication-features-blackhole.
                                                             (line    6)
* replication, circular:                 mysql-cluster-replication-issues.
                                                             (line   60)
* replication, crashes:                  replication-features-shutdowns.
                                                             (line    6)
* replication, in MySQL Cluster:         mysql-cluster-replication.
                                                             (line   20)
* replication, row-based vs statement-based: replication-sbr-rbr.
                                                             (line    6)
* replication, safe and unsafe statements: replication-rbr-safe-unsafe.
                                                             (line    6)
* replication, semisynchronous:          replication-semisync.
                                                             (line   12)
* replication, shutdown and restart <1>: replication-features-temptables.
                                                             (line    6)
* replication, shutdown and restart:     replication-features-shutdowns.
                                                             (line    6)
* replication, statements incompatible with STATEMENT format: replication-sbr-rbr.
                                                             (line   38)
* replication, timeouts:                 replication-features-timeout.
                                                             (line    6)
* replication, with differing tables on master and slave: replication-features-differing-tables.
                                                             (line   11)
* replication, with ZFS:                 ha-zfs-replication. (line   12)
* ReplicationManager class:              connector-net-ref-replication-replicationmanager.
                                                             (line   10)
* ReplicationRoundRobinServerGroup class: connector-net-ref-replication-replicationroundrobinservergroup.
                                                             (line   10)
* ReplicationServer class:               connector-net-ref-replication-replicationserver.
                                                             (line   10)
* ReplicationServerGroup class:          connector-net-ref-replication-replicationservergroup.
                                                             (line   10)
* REPORT command (MySQL Cluster):        mysql-cluster-mgm-client-commands.
                                                             (line  126)
* report-host option, mysqld:            replication-options-slave.
                                                             (line  870)
* report-password option, mysqld:        replication-options-slave.
                                                             (line  895)
* report-port option, mysqld:            replication-options-slave.
                                                             (line  920)
* report-user option, mysqld:            replication-options-slave.
                                                             (line  952)
* report_host system variable:           server-system-variables.
                                                             (line 4958)
* report_password system variable:       server-system-variables.
                                                             (line 4975)
* report_port system variable:           server-system-variables.
                                                             (line 4993)
* report_user system variable:           server-system-variables.
                                                             (line 5015)
* reporting, bugs <1>:                   bug-reports.        (line    6)
* reporting, bugs:                       introduction.       (line   69)
* reporting, Connector/Net problems:     connector-net-support.
                                                             (line   11)
* reporting, Connector/ODBC problems:    connector-odbc-support.
                                                             (line   12)
* reporting, errors:                     bug-reports.        (line    6)
* reporting, problems:                   introduction.       (line   69)
* Requesting binlog dump, thread state:  slave-io-thread-states.
                                                             (line   30)
* REQUIRE GRANT option:                  grant.              (line  522)
* reschedule, thread state:              delayed-insert-thread-states.
                                                             (line   76)
* reserved words:                        reserved-words.     (line    6)
* reserved words, and replication:       replication-features-reserved-words.
                                                             (line    6)
* ReservedSendBufferMemory:              mysql-cluster-ndbd-definition.
                                                             (line 3600)
* RESET MASTER:                          reset-master.       (line    6)
* RESET SLAVE:                           reset-slave.        (line    6)
* RESET SLAVE ALL:                       reset-slave.        (line    6)
* Reset stmt, thread command:            thread-commands.    (line  107)
* reset-slave.pl:                        mysql-cluster-replication-auto-sync.
                                                             (line   11)
* resetmaster option, mysqlhotcopy:      mysqlhotcopy.       (line  178)
* resetslave option, mysqlhotcopy:       mysqlhotcopy.       (line  182)
* RESIGNAL:                              resignal.           (line   13)
* resolve_stack_dump <1>:                resolve-stack-dump. (line    6)
* resolve_stack_dump:                    programs-overview.  (line  244)
* resolve_stack_dump, help option:       resolve-stack-dump. (line   21)
* resolve_stack_dump, numeric-dump-file option: resolve-stack-dump.
                                                             (line   25)
* resolve_stack_dump, symbols-file option: resolve-stack-dump.
                                                             (line   29)
* resolve_stack_dump, version option:    resolve-stack-dump. (line   33)
* resolveip <1>:                         resolveip.          (line    6)
* resolveip:                             programs-overview.  (line  261)
* resolveip, help option:                resolveip.          (line   15)
* resolveip, silent option:              resolveip.          (line   19)
* resolveip, version option:             resolveip.          (line   23)
* resource limits, user accounts <1>:    grant.              (line  490)
* resource limits, user accounts <2>:    user-resources.     (line    6)
* resource limits, user accounts:        server-system-variables.
                                                             (line 3541)
* resources, ndbinfo table:              mysql-cluster-ndbinfo-resources.
                                                             (line    6)
* RESTART command (MySQL Cluster):       mysql-cluster-mgm-client-commands.
                                                             (line   89)
* restarting, the server:                unix-postinstallation.
                                                             (line  248)
* RestartOnErrorInsert:                  mysql-cluster-ndbd-definition.
                                                             (line 1552)
* restore:                               glossary.           (line 2616)
* restore-privilege-tables option (ndb_restore): mysql-cluster-programs-ndb-restore.
                                                             (line  362)
* restore_connect option (ndb_restore):  mysql-cluster-programs-ndb-restore.
                                                             (line  198)
* restore_data option (ndb_restore):     mysql-cluster-programs-ndb-restore.
                                                             (line  348)
* restore_epoch option (ndb_restore):    mysql-cluster-programs-ndb-restore.
                                                             (line  340)
* restore_meta option (ndb_restore):     mysql-cluster-programs-ndb-restore.
                                                             (line  354)
* restore_nodeid option (ndb_restore):   mysql-cluster-programs-ndb-restore.
                                                             (line  220)
* restore_skip-table-check option (ndb_restore): mysql-cluster-programs-ndb-restore.
                                                             (line  234)
* restoring backups, in MySQL Cluster:   mysql-cluster-programs-ndb-restore.
                                                             (line    6)
* restoring from backup, in MySQL Cluster replication: mysql-cluster-replication-backups.
                                                             (line   11)
* restrictions, character sets:          charset-restrictions.
                                                             (line    6)
* restrictions, events:                  stored-program-restrictions.
                                                             (line    6)
* restrictions, InnoDB:                  innodb-restrictions.
                                                             (line    6)
* restrictions, performance_schema database: performance-schema-restrictions.
                                                             (line    6)
* restrictions, pluggable authentication: pluggable-authentication-restrictions.
                                                             (line    6)
* restrictions, server-side cursors:     cursor-restrictions.
                                                             (line    6)
* restrictions, signal:                  condition-handling-restrictions.
                                                             (line    6)
* restrictions, stored routines:         stored-program-restrictions.
                                                             (line    6)
* restrictions, subqueries:              subquery-restrictions.
                                                             (line    6)
* restrictions, triggers:                stored-program-restrictions.
                                                             (line    6)
* restrictions, views:                   view-restrictions.  (line    6)
* restrictions, XA transactions:         xa-restrictions.    (line    6)
* result-file option, mysqlbinlog:       mysqlbinlog.        (line  437)
* result-file option, mysqldump:         mysqldump.          (line  954)
* retries option, ndb_desc:              mysql-cluster-programs-ndb-desc.
                                                             (line  307)
* retrieving, data from tables:          retrieving-data.    (line   18)
* RETURN:                                return.             (line    6)
* return (\r) <1>:                       load-data.          (line  412)
* return (\r):                           string-literals.    (line   73)
* return values, UDFs:                   udf-return-values.  (line    6)
* REVERSE():                             string-functions.   (line  568)
* REVOKE:                                revoke.             (line    6)
* revoking, privileges:                  revoke.             (line    6)
* rewrite-database option (ndb_restore): mysql-cluster-programs-ndb-restore.
                                                             (line  858)
* rhost option, mysqlaccess:             mysqlaccess.        (line  130)
* RIGHT JOIN:                            join.               (line    6)
* RIGHT OUTER JOIN:                      join.               (line    6)
* RIGHT():                               string-functions.   (line  577)
* RLIKE:                                 regexp.             (line   32)
* rollback:                              glossary.           (line 2624)
* ROLLBACK <1>:                          commit.             (line    6)
* ROLLBACK:                              ansi-diff-transactions.
                                                             (line    6)
* rollback option, mysqlaccess:          mysqlaccess.        (line  134)
* rollback segment:                      glossary.           (line 2632)
* ROLLBACK TO SAVEPOINT:                 savepoint.          (line    6)
* ROLLBACK, XA transactions:             xa-statements.      (line    6)
* Rolling back, thread state:            general-thread-states.
                                                             (line  266)
* rolling restart (MySQL Cluster):       mysql-cluster-rolling-restart.
                                                             (line    6)
* ROLLUP:                                group-by-modifiers. (line    6)
* root password:                         default-privileges. (line    6)
* root user:                             security-guidelines.
                                                             (line    6)
* root user, password resetting:         resetting-permissions.
                                                             (line   12)
* ROUND():                               mathematical-functions.
                                                             (line  450)
* rounding:                              precision-math.     (line   14)
* rounding errors:                       numeric-type-overview.
                                                             (line  137)
* routines option, mysqldump:            mysqldump.          (line  962)
* ROUTINES, INFORMATION_SCHEMA table:    routines-table.     (line    6)
* row:                                   glossary.           (line 2635)
* ROW:                                   row-subqueries.     (line    6)
* row format:                            glossary.           (line 2643)
* row lock:                              glossary.           (line 2655)
* row size, maximum:                     column-count-limit. (line    6)
* row subqueries:                        row-subqueries.     (line    6)
* row-based replication:                 glossary.           (line 2664)
* row-based replication, advantages:     replication-sbr-rbr.
                                                             (line  135)
* row-based replication, disadvantages:  replication-sbr-rbr.
                                                             (line  171)
* row-level locking <1>:                 glossary.           (line 2669)
* row-level locking:                     internal-locking.   (line    6)
* ROW_COUNT():                           information-functions.
                                                             (line  481)
* ROW_FORMAT, COMPACT:                   innodb-row-format-antelope.
                                                             (line    6)
* ROW_FORMAT, COMPRESSED <1>:            innodb-row-format-dynamic.
                                                             (line    6)
* ROW_FORMAT, COMPRESSED:                innodb-compression-usage.
                                                             (line   11)
* ROW_FORMAT, DYNAMIC:                   innodb-row-format-dynamic.
                                                             (line    6)
* ROW_FORMAT, REDUNDANT:                 innodb-row-format-antelope.
                                                             (line    6)
* rowid option, ndb_select_all:          mysql-cluster-programs-ndb-select-all.
                                                             (line  120)
* rows option, mysql_find_rows:          mysql-find-rows.    (line   36)
* rows option, ndb_config:               mysql-cluster-programs-ndb-config.
                                                             (line  344)
* rows, counting:                        counting-rows.      (line    6)
* rows, deleting:                        deleting-from-related-tables.
                                                             (line    6)
* rows, locking:                         ansi-diff-transactions.
                                                             (line  137)
* rows, matching problems:               no-matching-rows.   (line    6)
* rows, selecting:                       selecting-rows.     (line    6)
* rows, sorting:                         sorting-rows.       (line    6)
* RPAD():                                string-functions.   (line  587)
* Rpl_semi_sync_master_clients status variable: server-status-variables.
                                                             (line 1285)
* rpl_semi_sync_master_enabled system variable: server-system-variables.
                                                             (line 5033)
* Rpl_semi_sync_master_net_avg_wait_time status variable: server-status-variables.
                                                             (line 1292)
* Rpl_semi_sync_master_net_wait_time status variable: server-status-variables.
                                                             (line 1300)
* Rpl_semi_sync_master_net_waits status variable: server-status-variables.
                                                             (line 1307)
* Rpl_semi_sync_master_no_times status variable: server-status-variables.
                                                             (line 1314)
* Rpl_semi_sync_master_no_tx status variable: server-status-variables.
                                                             (line 1322)
* Rpl_semi_sync_master_status status variable: server-status-variables.
                                                             (line 1330)
* Rpl_semi_sync_master_timefunc_failures status variable: server-status-variables.
                                                             (line 1341)
* rpl_semi_sync_master_timeout system variable: server-system-variables.
                                                             (line 5053)
* rpl_semi_sync_master_trace_level system variable: server-system-variables.
                                                             (line 5074)
* Rpl_semi_sync_master_tx_avg_wait_time status variable: server-status-variables.
                                                             (line 1349)
* Rpl_semi_sync_master_tx_wait_time status variable: server-status-variables.
                                                             (line 1357)
* Rpl_semi_sync_master_tx_waits status variable: server-status-variables.
                                                             (line 1364)
* rpl_semi_sync_master_wait_no_slave system variable: server-system-variables.
                                                             (line 5102)
* Rpl_semi_sync_master_wait_pos_backtraverse status variable: server-status-variables.
                                                             (line 1371)
* Rpl_semi_sync_master_wait_sessions status variable: server-status-variables.
                                                             (line 1382)
* Rpl_semi_sync_master_yes_tx status variable: server-status-variables.
                                                             (line 1389)
* rpl_semi_sync_slave_enabled system variable: server-system-variables.
                                                             (line 5136)
* Rpl_semi_sync_slave_status status variable: server-status-variables.
                                                             (line 1397)
* rpl_semi_sync_slave_trace_level system variable: server-system-variables.
                                                             (line 5156)
* Rpl_status status variable:            server-status-variables.
                                                             (line 1406)
* RPM file:                              linux-installation-rpm.
                                                             (line    6)
* rpm option, mysql_install_db:          mysql-install-db.   (line   67)
* RPM Package Manager:                   linux-installation-rpm.
                                                             (line    6)
* RTRIM():                               string-functions.   (line  600)
* Ruby API:                              apis-ruby.          (line   11)
* running CMake after prior invocation <1>: compilation-problems.
                                                             (line    9)
* running CMake after prior invocation:  installing-source-distribution.
                                                             (line  165)
* running, ANSI mode:                    ansi-mode.          (line    6)
* running, batch mode:                   batch-mode.         (line    6)
* running, multiple servers:             multiple-servers.   (line   13)
* running, queries:                      entering-queries.   (line    6)
* rw-lock:                               glossary.           (line 2675)
* rwlock_instances table, performance_schema: rwlock-instances-table.
                                                             (line    6)
* safe statement (replication), defined: replication-rbr-safe-unsafe.
                                                             (line    6)
* safe-mode option, mysqld:              server-options.     (line 1729)
* safe-recover option, myisamchk:        myisamchk-repair-options.
                                                             (line   92)
* safe-show-database option, mysqld:     server-options.     (line 1741)
* safe-updates option:                   safe-updates.       (line    6)
* safe-updates option, mysql:            mysql-command-options.
                                                             (line  503)
* safe-user-create option, mysqld:       server-options.     (line 1764)
* Sakila:                                history.            (line    6)
* same value wins (conflict resolution): mysql-cluster-replication-conflict-resolution.
                                                             (line  264)
* savepoint:                             glossary.           (line 2684)
* SAVEPOINT:                             savepoint.          (line    6)
* Saving state, thread state:            general-thread-states.
                                                             (line  270)
* scalability:                           glossary.           (line 2692)
* scale out:                             glossary.           (line 2702)
* scale up:                              glossary.           (line 2707)
* scale, arithmetic:                     precision-math.     (line   14)
* scale, numeric:                        data-types.         (line   38)
* SchedulerExecutionTimer:               mysql-cluster-ndbd-definition.
                                                             (line 2822)
* SchedulerSpinTimer:                    mysql-cluster-ndbd-definition.
                                                             (line 2840)
* schema:                                glossary.           (line 2713)
* SCHEMA():                              information-functions.
                                                             (line  561)
* schema, altering:                      alter-database.     (line    6)
* schema, creating:                      create-database.    (line    6)
* schema, deleting:                      drop-database.      (line    6)
* SCHEMA_PRIVILEGES, INFORMATION_SCHEMA table: schema-privileges-table.
                                                             (line    6)
* SCHEMATA, INFORMATION_SCHEMA table:    schemata-table.     (line    6)
* SCI (Scalable Coherent Interface) <1>: mysql-cluster-sci-sockets.
                                                             (line    6)
* SCI (Scalable Coherent Interface):     mysql-cluster-sci-definition.
                                                             (line    6)
* script files:                          batch-mode.         (line    6)
* scripts <1>:                           mysqld-multi.       (line    6)
* scripts:                               mysqld-safe.        (line    6)
* scripts, mysql_install_db:             mysql-install-db-problems.
                                                             (line    6)
* scripts, SQL:                          mysql.              (line   15)
* search index:                          glossary.           (line 2732)
* Searching rows for update, thread state: general-thread-states.
                                                             (line  277)
* searching, and case sensitivity:       case-sensitivity.   (line    6)
* searching, full-text:                  fulltext-search.    (line   16)
* searching, MySQL Web pages:            bug-reports.        (line    6)
* searching, two keys:                   searching-on-two-keys.
                                                             (line    6)
* SEC_TO_TIME():                         date-and-time-functions.
                                                             (line  801)
* SECOND():                              date-and-time-functions.
                                                             (line  794)
* secondary index:                       glossary.           (line 2737)
* secondary index, InnoDB:               innodb-index-types. (line    6)
* secure-auth option, mysql:             mysql-command-options.
                                                             (line  511)
* secure-auth option, mysqld:            server-options.     (line 1789)
* secure-file-priv option, mysqld:       server-options.     (line 1823)
* secure_auth system variable:           server-system-variables.
                                                             (line 5175)
* secure_file_priv system variable:      server-system-variables.
                                                             (line 5207)
* securing a MySQL Cluster:              mysql-cluster-security-mysql-security-procedures.
                                                             (line    6)
* security system:                       privilege-system.   (line   16)
* security, against attackers:           security-against-attack.
                                                             (line    6)
* security, and malicious SQL statements: mysql-cluster-security-mysql-privileges.
                                                             (line   66)
* security, and NDB utilities:           mysql-cluster-security-mysql-security-procedures.
                                                             (line   76)
* segment:                               glossary.           (line 2753)
* SELECT INTO TABLE:                     ansi-diff-select-into-table.
                                                             (line    6)
* SELECT speed:                          select-speed.       (line    6)
* SELECT, INTO:                          select-into.        (line    6)
* SELECT, LIMIT:                         select.             (line   13)
* SELECT, optimizing <1>:                explain.            (line    6)
* SELECT, optimizing:                    using-explain.      (line    6)
* SELECT, Query Cache:                   query-cache.        (line   13)
* select_limit variable:                 mysql-command-options.
                                                             (line  667)
* selecting, databases:                  creating-database.  (line    6)
* selectivity:                           glossary.           (line 2768)
* semi-consistent read:                  glossary.           (line 2777)
* semi-consistent read, InnoDB:          innodb-parameters.  (line 1173)
* semisynchronous replication:           replication-semisync.
                                                             (line   12)
* semisynchronous replication plugins:   semisynchronous-replication-plugins.
                                                             (line    6)
* semisynchronous replication, administrative interface: replication-semisync-interface.
                                                             (line    6)
* semisynchronous replication, configuration: replication-semisync-installation.
                                                             (line    6)
* semisynchronous replication, installation: replication-semisync-installation.
                                                             (line    6)
* semisynchronous replication, monitoring: replication-semisync-monitoring.
                                                             (line    6)
* SendBufferMemory:                      mysql-cluster-tcp-definition.
                                                             (line  108)
* Sending binlog event to slave, thread state: master-thread-states.
                                                             (line   11)
* sending cached result to client, thread state: query-cache-thread-states.
                                                             (line   24)
* SendLimit:                             mysql-cluster-sci-definition.
                                                             (line  142)
* SendSignalId <1>:                      mysql-cluster-sci-definition.
                                                             (line  155)
* SendSignalId <2>:                      mysql-cluster-shm-definition.
                                                             (line   99)
* SendSignalId:                          mysql-cluster-tcp-definition.
                                                             (line  135)
* SEQUENCE:                              example-auto-increment.
                                                             (line    6)
* sequence emulation:                    information-functions.
                                                             (line  443)
* sequences:                             example-auto-increment.
                                                             (line    6)
* SERIAL:                                numeric-type-overview.
                                                             (line    6)
* SERIAL DEFAULT VALUE:                  data-type-defaults. (line   83)
* SERIALIZABLE:                          glossary.           (line 2788)
* SERIALIZABLE, transaction isolation level: set-transaction.
                                                             (line  149)
* server:                                glossary.           (line 2801)
* server administration:                 mysqladmin.         (line    6)
* server plugins:                        server-plugins.     (line   11)
* server variable:                       show-variables.     (line    6)
* server variables:                      server-system-variables.
                                                             (line    6)
* server, connecting <1>:                connecting.         (line    6)
* server, connecting:                    connecting-disconnecting.
                                                             (line    6)
* server, debugging:                     debugging-server.   (line   16)
* server, disconnecting:                 connecting-disconnecting.
                                                             (line    6)
* server, logs:                          server-logs.        (line   15)
* server, restart:                       unix-postinstallation.
                                                             (line  248)
* server, shutdown:                      unix-postinstallation.
                                                             (line  240)
* server, signal handling:               server-signal-response.
                                                             (line    6)
* server, starting:                      unix-postinstallation.
                                                             (line   54)
* server, starting and stopping:         automatic-start.    (line    6)
* server, starting problems:             starting-server.    (line    6)
* server-id option, mysqlbinlog:         mysqlbinlog.        (line  441)
* server-id option, mysqld:              replication-options.
                                                             (line   21)
* server-id-bits option, mysqlbinlog:    mysqlbinlog.        (line  446)
* server-id-bits option, mysqld:         mysql-cluster-program-options-mysqld.
                                                             (line  453)
* server-side cursor, restrictions:      cursor-restrictions.
                                                             (line    6)
* server_id system variable:             server-system-variables.
                                                             (line 5228)
* server_id_bits system variable:        mysql-cluster-system-variables.
                                                             (line  984)
* server_operations, ndbinfo table:      mysql-cluster-ndbinfo-server-operations.
                                                             (line    6)
* server_transactions, ndbinfo table:    mysql-cluster-ndbinfo-server-transactions.
                                                             (line    6)
* ServerPort:                            mysql-cluster-ndbd-definition.
                                                             (line  126)
* servers, multiple:                     multiple-servers.   (line   13)
* service-startup-timeout option, mysql.server: mysql-server.
                                                             (line   49)
* services, for plugins:                 plugin-services.    (line    6)
* servlet:                               connector-j-usagenotes-glassfish-config-servlet.
                                                             (line    6)
* session variable, autocommit:          server-system-variables.
                                                             (line  712)
* session variable, big_tables:          server-system-variables.
                                                             (line  845)
* session variable, error_count:         server-system-variables.
                                                             (line 1698)
* session variable, external_user:       server-system-variables.
                                                             (line 1756)
* session variable, foreign_key_checks:  server-system-variables.
                                                             (line 1821)
* session variable, identity:            server-system-variables.
                                                             (line 2149)
* session variable, insert_id:           server-system-variables.
                                                             (line 2228)
* session variable, last_insert_id:      server-system-variables.
                                                             (line 2614)
* session variable, profiling:           server-system-variables.
                                                             (line 4384)
* session variable, profiling_history_size: server-system-variables.
                                                             (line 4392)
* session variable, proxy_user:          server-system-variables.
                                                             (line 4413)
* session variable, rand_seed1:          server-system-variables.
                                                             (line 4707)
* session variable, rand_seed2:          server-system-variables.
                                                             (line 4721)
* session variable, sql_auto_is_null:    server-system-variables.
                                                             (line 5520)
* session variable, sql_big_selects:     server-system-variables.
                                                             (line 5565)
* session variable, sql_buffer_result:   server-system-variables.
                                                             (line 5590)
* session variable, sql_notes:           server-system-variables.
                                                             (line 5720)
* session variable, sql_quote_show_create: server-system-variables.
                                                             (line 5730)
* session variable, sql_safe_updates:    server-system-variables.
                                                             (line 5739)
* session variable, sql_warnings:        server-system-variables.
                                                             (line 5771)
* session variable, timestamp:           server-system-variables.
                                                             (line 6434)
* session variable, transaction_allow_batching: mysql-cluster-system-variables.
                                                             (line  807)
* session variable, unique_checks:       server-system-variables.
                                                             (line 6634)
* session variable, warning_count:       server-system-variables.
                                                             (line 6779)
* session variables, and replication:    replication-features-variables.
                                                             (line    6)
* SESSION_STATUS, INFORMATION_SCHEMA table: status-table.    (line    6)
* SESSION_USER():                        information-functions.
                                                             (line  565)
* SESSION_VARIABLES, INFORMATION_SCHEMA table: variables-table.
                                                             (line    6)
* SET:                                   set-statement.      (line    6)
* SET data type <1>:                     set.                (line    6)
* SET data type:                         string-type-overview.
                                                             (line  257)
* SET GLOBAL sql_slave_skip_counter:     set-global-sql-slave-skip-counter.
                                                             (line    6)
* SET OPTION:                            set-statement.      (line    6)
* Set option, thread command:            thread-commands.    (line  111)
* SET PASSWORD:                          set-password.       (line    6)
* SET PASSWORD statement:                assigning-passwords.
                                                             (line    6)
* SET sql_log_bin:                       set-sql-log-bin.    (line    6)
* SET statement, assignment operator:    assignment-operators.
                                                             (line   70)
* SET TRANSACTION:                       set-transaction.    (line    6)
* SET, CHARACTER SET <1>:                set-statement.      (line  173)
* SET, CHARACTER SET:                    charset-connection. (line    6)
* SET, NAMES <1>:                        set-statement.      (line  189)
* SET, NAMES <2>:                        charset-applications.
                                                             (line    6)
* SET, NAMES:                            charset-connection. (line    6)
* SET, ONE_SHOT:                         set-statement.      (line  205)
* SET, size:                             storage-requirements.
                                                             (line  246)
* set-auto-increment[ option, myisamchk: myisamchk-other-options.
                                                             (line   28)
* set-character-set option, myisamchk:   myisamchk-repair-options.
                                                             (line  105)
* set-charset option, mysqlbinlog:       mysqlbinlog.        (line  459)
* set-charset option, mysqldump:         mysqldump.          (line  984)
* set-collation option, myisamchk:       myisamchk-repair-options.
                                                             (line  110)
* setting passwords:                     set-password.       (line    6)
* setting program variables:             program-variables.  (line    6)
* setting, passwords:                    assigning-passwords.
                                                             (line    6)
* setup, postinstallation:               postinstallation.   (line   11)
* setup, thread state:                   general-thread-states.
                                                             (line  291)
* setup_consumers table, performance_schema: setup-consumers-table.
                                                             (line    6)
* setup_instruments table, performance_schema: setup-instruments-table.
                                                             (line    6)
* setup_timers table, performance_schema: setup-timers-table.
                                                             (line    6)
* SHA():                                 encryption-functions.
                                                             (line  417)
* SHA1():                                encryption-functions.
                                                             (line  417)
* SHA2():                                encryption-functions.
                                                             (line  439)
* shared lock:                           glossary.           (line 2808)
* shared memory transporter:             mysql-cluster-shm-definition.
                                                             (line    6)
* shared tablespace:                     glossary.           (line 2812)
* shared-memory option, mysqld:          server-options.     (line 1843)
* shared-memory-base-name option:        connecting.         (line  189)
* shared-memory-base-name option, mysqld: server-options.    (line 1856)
* shared-memory-base-name option, mysqlslap: mysqlslap.      (line  408)
* shared_memory system variable:         server-system-variables.
                                                             (line 5252)
* shared_memory_base_name system variable: server-system-variables.
                                                             (line 5265)
* SharedBufferSize:                      mysql-cluster-sci-definition.
                                                             (line  123)
* SharedGlobalMemory:                    mysql-cluster-ndbd-definition.
                                                             (line 3234)
* sharp checkpoint:                      glossary.           (line 2814)
* shell syntax:                          manual-conventions. (line  120)
* ShmKey:                                mysql-cluster-shm-definition.
                                                             (line   72)
* ShmSize:                               mysql-cluster-shm-definition.
                                                             (line   85)
* short-form option, mysqlbinlog:        mysqlbinlog.        (line  464)
* SHOW AUTHORS <1>:                      show-authors.       (line    6)
* SHOW AUTHORS:                          show.               (line   50)
* SHOW BINARY LOGS <1>:                  show-binary-logs.   (line    6)
* SHOW BINARY LOGS:                      show.               (line   50)
* SHOW BINLOG EVENTS <1>:                show-binlog-events. (line    6)
* SHOW BINLOG EVENTS:                    show.               (line   50)
* SHOW CHARACTER SET <1>:                show-character-set. (line    6)
* SHOW CHARACTER SET:                    show.               (line   50)
* SHOW COLLATION <1>:                    show-collation.     (line    6)
* SHOW COLLATION:                        show.               (line   50)
* SHOW COLUMNS <1>:                      show-columns.       (line    6)
* SHOW COLUMNS:                          show.               (line   50)
* SHOW command (MySQL Cluster):          mysql-cluster-mgm-client-commands.
                                                             (line   38)
* SHOW CONTRIBUTORS <1>:                 show-contributors.  (line    6)
* SHOW CONTRIBUTORS:                     show.               (line   50)
* SHOW CREATE DATABASE <1>:              show-create-database.
                                                             (line    6)
* SHOW CREATE DATABASE:                  show.               (line   50)
* SHOW CREATE EVENT:                     show.               (line   50)
* SHOW CREATE FUNCTION <1>:              show-create-function.
                                                             (line    6)
* SHOW CREATE FUNCTION:                  show.               (line   50)
* SHOW CREATE PROCEDURE <1>:             show-create-procedure.
                                                             (line    6)
* SHOW CREATE PROCEDURE:                 show.               (line   50)
* SHOW CREATE SCHEMA <1>:                show-create-database.
                                                             (line    6)
* SHOW CREATE SCHEMA:                    show.               (line   50)
* SHOW CREATE TABLE <1>:                 show-create-table.  (line    6)
* SHOW CREATE TABLE:                     show.               (line   50)
* SHOW CREATE TRIGGER <1>:               show-create-trigger.
                                                             (line    6)
* SHOW CREATE TRIGGER:                   show.               (line   50)
* SHOW CREATE VIEW <1>:                  show-create-view.   (line    6)
* SHOW CREATE VIEW:                      show.               (line   50)
* SHOW DATABASES <1>:                    show-databases.     (line    6)
* SHOW DATABASES:                        show.               (line   50)
* SHOW ENGINE <1>:                       show-engine.        (line    6)
* SHOW ENGINE:                           show.               (line   50)
* SHOW ENGINE INNODB MUTEX:              innodb-other-changes-show-mutex.
                                                             (line    6)
* SHOW ENGINE INNODB STATUS:             show-engine.        (line    6)
* SHOW ENGINE INNODB STATUS, and innodb_adaptive_hash_index: innodb-performance-adaptive_hash_index.
                                                             (line    6)
* SHOW ENGINE INNODB STATUS, and innodb_use_sys_malloc: innodb-performance-use_sys_malloc.
                                                             (line    6)
* SHOW ENGINE NDB STATUS <1>:            mysql-cluster-sql-statements.
                                                             (line   10)
* SHOW ENGINE NDB STATUS:                show-engine.        (line    6)
* SHOW ENGINE NDBCLUSTER STATUS <1>:     mysql-cluster-sql-statements.
                                                             (line   10)
* SHOW ENGINE NDBCLUSTER STATUS:         show-engine.        (line    6)
* SHOW ENGINE, and MySQL Cluster:        mysql-cluster-sql-statements.
                                                             (line   10)
* SHOW ENGINES <1>:                      show-engines.       (line    6)
* SHOW ENGINES:                          show.               (line   50)
* SHOW ENGINES, and MySQL Cluster:       mysql-cluster-sql-statements.
                                                             (line   20)
* SHOW ERRORS <1>:                       show-errors.        (line    6)
* SHOW ERRORS:                           show.               (line   50)
* SHOW EVENTS <1>:                       show-events.        (line    6)
* SHOW EVENTS:                           show.               (line   50)
* SHOW extensions:                       extended-show.      (line    6)
* SHOW FIELDS <1>:                       show-columns.       (line  102)
* SHOW FIELDS:                           show.               (line   50)
* SHOW FUNCTION CODE <1>:                show-function-code. (line    6)
* SHOW FUNCTION CODE:                    show.               (line   50)
* SHOW FUNCTION STATUS <1>:              show-function-status.
                                                             (line    6)
* SHOW FUNCTION STATUS:                  show.               (line   50)
* SHOW GRANTS <1>:                       show-grants.        (line    6)
* SHOW GRANTS:                           show.               (line   50)
* SHOW INDEX <1>:                        show-index.         (line    6)
* SHOW INDEX:                            show.               (line   50)
* SHOW KEYS <1>:                         show-index.         (line    6)
* SHOW KEYS:                             show.               (line   50)
* SHOW MASTER LOGS <1>:                  show-binary-logs.   (line    6)
* SHOW MASTER LOGS:                      show.               (line   50)
* SHOW MASTER STATUS <1>:                show-master-status. (line    6)
* SHOW MASTER STATUS:                    show.               (line   50)
* SHOW OPEN TABLES <1>:                  show-open-tables.   (line    6)
* SHOW OPEN TABLES:                      show.               (line   50)
* SHOW PLUGINS <1>:                      show-plugins.       (line    6)
* SHOW PLUGINS:                          show.               (line   50)
* SHOW PRIVILEGES <1>:                   show-privileges.    (line    6)
* SHOW PRIVILEGES:                       show.               (line   50)
* SHOW PROCEDURE CODE <1>:               show-procedure-code.
                                                             (line    6)
* SHOW PROCEDURE CODE:                   show.               (line   50)
* SHOW PROCEDURE STATUS <1>:             show-procedure-status.
                                                             (line    6)
* SHOW PROCEDURE STATUS:                 show.               (line   50)
* SHOW PROCESSLIST <1>:                  show-processlist.   (line    6)
* SHOW PROCESSLIST:                      show.               (line   50)
* SHOW PROFILE <1>:                      show-profile.       (line    6)
* SHOW PROFILE:                          show.               (line   50)
* SHOW PROFILES <1>:                     show-profiles.      (line    6)
* SHOW PROFILES <2>:                     show-profile.       (line    6)
* SHOW PROFILES:                         show.               (line   50)
* SHOW RELAYLOG EVENTS:                  show-relaylog-events.
                                                             (line    6)
* SHOW SCHEDULER STATUS:                 events-status-info. (line    6)
* SHOW SCHEMAS:                          show-databases.     (line    6)
* SHOW SLAVE HOSTS <1>:                  show-slave-hosts.   (line    6)
* SHOW SLAVE HOSTS:                      show.               (line   50)
* SHOW SLAVE STATUS <1>:                 show-slave-status.  (line    6)
* SHOW SLAVE STATUS:                     show.               (line   50)
* SHOW STATUS:                           show.               (line   50)
* SHOW STATUS, and MySQL Cluster:        mysql-cluster-sql-statements.
                                                             (line  124)
* SHOW STORAGE ENGINES:                  show-engines.       (line    6)
* SHOW TABLE STATUS:                     show.               (line   50)
* SHOW TABLES <1>:                       show-tables.        (line    6)
* SHOW TABLES:                           show.               (line   50)
* SHOW TRIGGERS <1>:                     show-triggers.      (line    6)
* SHOW TRIGGERS:                         show.               (line   50)
* SHOW VARIABLES:                        show.               (line   50)
* SHOW VARIABLES, and MySQL Cluster:     mysql-cluster-sql-statements.
                                                             (line   57)
* SHOW WARNINGS <1>:                     show-warnings.      (line    6)
* SHOW WARNINGS:                         show.               (line   50)
* SHOW with WHERE <1>:                   extended-show.      (line    6)
* SHOW with WHERE:                       information-schema. (line   40)
* SHOW, in MySQL Cluster management client: mysql-cluster-quick.
                                                             (line  145)
* show-slave-auth-info option, mysqld:   replication-options-slave.
                                                             (line  977)
* show-table-type option, mysqlshow:     mysqlshow.          (line  214)
* show-temp-status option, ndb_show_tables: mysql-cluster-programs-ndb-show-tables.
                                                             (line   64)
* show-warnings option, mysql:           mysql-command-options.
                                                             (line  523)
* showing, database information:         mysqlshow.          (line    6)
* shutdown:                              glossary.           (line 2820)
* SHUTDOWN command (MySQL Cluster):      mysql-cluster-mgm-client-commands.
                                                             (line  182)
* Shutdown, thread command:              thread-commands.    (line  116)
* shutdown_timeout variable:             mysqladmin.         (line  483)
* shutting down, the server:             unix-postinstallation.
                                                             (line  240)
* Shutting down, thread state:           mysql-cluster-thread-states.
                                                             (line   18)
* sigint-ignore option, mysql:           mysql-command-options.
                                                             (line  528)
* SIGN():                                mathematical-functions.
                                                             (line  510)
* SIGNAL:                                signal.             (line   11)
* signal, restrictions:                  condition-handling-restrictions.
                                                             (line    6)
* signals, server response:              server-signal-response.
                                                             (line    6)
* SigNum:                                mysql-cluster-shm-definition.
                                                             (line  131)
* silent column changes:                 silent-column-changes.
                                                             (line    6)
* silent option, myisamchk:              myisamchk-general-options.
                                                             (line   27)
* silent option, myisampack:             myisampack.         (line   93)
* silent option, mysql:                  mysql-command-options.
                                                             (line  533)
* silent option, mysqladmin:             mysqladmin.         (line  429)
* silent option, mysqlcheck:             mysqlcheck.         (line  385)
* silent option, mysqld_multi:           mysqld-multi.       (line  136)
* silent option, mysqlimport:            mysqlimport.        (line  289)
* silent option, mysqlslap:              mysqlslap.          (line  442)
* silent option, perror:                 perror.             (line   48)
* silent option, resolveip:              resolveip.          (line   19)
* SIN():                                 mathematical-functions.
                                                             (line  522)
* single quote (\'):                     string-literals.    (line   69)
* single user mode (MySQL Cluster) <1>:  mysql-cluster-single-user-mode.
                                                             (line    6)
* single user mode (MySQL Cluster):      mysql-cluster-mgm-client-commands.
                                                             (line  158)
* single user mode (MySQL Cluster), and ndb_restore: mysql-cluster-programs-ndb-restore.
                                                             (line   19)
* single-transaction option, mysqldump:  mysqldump.          (line  990)
* single-user option, ndb_waiter:        mysql-cluster-programs-ndb-waiter.
                                                             (line   94)
* size of tables:                        table-size-limit.   (line    6)
* sizes, display:                        data-types.         (line   32)
* skip-broken-objects option (ndb_restore): mysql-cluster-programs-ndb-restore.
                                                             (line  832)
* skip-column-names option, mysql:       mysql-command-options.
                                                             (line  542)
* skip-comments option, mysqldump:       mysqldump.          (line 1030)
* skip-concurrent-insert option, mysqld: server-options.     (line 1870)
* skip-event-scheduler option, mysqld:   server-options.     (line 1876)
* skip-grant-tables option, mysqld:      server-options.     (line 1890)
* skip-host-cache option, mysqld:        server-options.     (line 1910)
* skip-innodb option, mysqld <1>:        innodb-parameters.  (line  204)
* skip-innodb option, mysqld:            server-options.     (line 1916)
* skip-kill-mysqld option, mysqld_safe:  mysqld-safe.        (line  252)
* skip-line-numbers option, mysql:       mysql-command-options.
                                                             (line  546)
* skip-name-resolve option, mysql_install_db: mysql-install-db.
                                                             (line   73)
* skip-name-resolve option, mysqld:      server-options.     (line 1923)
* skip-ndbcluster option, mysqld:        mysql-cluster-program-options-mysqld.
                                                             (line  497)
* skip-networking option, mysqld:        server-options.     (line 1930)
* skip-opt option, mysqldump:            mysqldump.          (line 1034)
* skip-partition option, mysqld:         server-options.     (line 1938)
* skip-safemalloc option, mysqld:        server-options.     (line 2026)
* skip-show-database option, mysqld:     server-options.     (line 2043)
* skip-slave-start option, mysqld:       replication-options-slave.
                                                             (line  994)
* skip-ssl option:                       ssl-options.        (line   36)
* skip-stack-trace option, mysqld:       server-options.     (line 2059)
* skip-symbolic-links option, mysqld:    server-options.     (line 2002)
* skip-syslog option, mysqld_safe:       mysqld-safe.        (line  262)
* skip-thread-priority option, mysqld:   server-options.     (line 2072)
* skip-unknown-objects option (ndb_restore): mysql-cluster-programs-ndb-restore.
                                                             (line  845)
* skip-use-db option, mysql_find_rows:   mysql-find-rows.    (line   40)
* skip_external_locking system variable: server-system-variables.
                                                             (line 5280)
* skip_name_resolve system variable:     server-system-variables.
                                                             (line 5309)
* skip_networking system variable:       server-system-variables.
                                                             (line 5334)
* skip_show_database system variable:    server-system-variables.
                                                             (line 5351)
* Slave has read all relay log; waiting for the slave I/O thread to update it, thread state: slave-sql-thread-states.
                                                             (line   24)
* slave server:                          glossary.           (line 2828)
* slave-load-tmpdir option, mysqld:      replication-options-slave.
                                                             (line 1030)
* slave-max-allowed-packet (mysqld):     replication-options-slave.
                                                             (line  221)
* slave-net-timeout option, mysqld:      replication-options-slave.
                                                             (line 1067)
* slave-skip-errors option, mysqld:      replication-options-slave.
                                                             (line 1093)
* slave_allow_batching:                  mysql-cluster-replication-starting.
                                                             (line   93)
* slave_compressed_protocol option, mysqld: replication-options-slave.
                                                             (line 1010)
* slave_compressed_protocol system variable: replication-options-slave.
                                                             (line 1315)
* slave_exec_mode system variable:       replication-options-slave.
                                                             (line 1334)
* slave_load_tmpdir system variable:     replication-options-slave.
                                                             (line 1367)
* slave_max_allowed_packet system variable: replication-options-slave.
                                                             (line 1387)
* slave_net_timeout system variable:     replication-options-slave.
                                                             (line 1420)
* slave_skip_errors system variable:     replication-options-slave.
                                                             (line 1440)
* slave_transaction_retries system variable: replication-options-slave.
                                                             (line 1468)
* slave_type_conversions system variable: replication-options-slave.
                                                             (line 1504)
* sleep option, mysqladmin:              mysqladmin.         (line  433)
* SLEEP():                               miscellaneous-functions.
                                                             (line  220)
* Sleep, thread command:                 thread-commands.    (line  120)
* slow queries:                          mysqladmin.         (line  186)
* slow query log <1>:                    glossary.           (line 2847)
* slow query log:                        slow-query-log.     (line    6)
* slow query log, and replication:       replication-features-logging.
                                                             (line    6)
* slow shutdown:                         glossary.           (line 2855)
* slow-query-log option, mysqld:         server-options.     (line 2084)
* slow-start-timeout option, mysqld:     server-options.     (line 2105)
* slow_launch_time system variable:      server-system-variables.
                                                             (line 5377)
* slow_query_log system variable:        server-system-variables.
                                                             (line 5396)
* slow_query_log_file system variable:   server-system-variables.
                                                             (line 5422)
* SMALLINT data type:                    numeric-type-overview.
                                                             (line  106)
* snapshot:                              glossary.           (line 2861)
* SNAPSHOTEND (START BACKUP command):    mysql-cluster-backup-using-management-client.
                                                             (line   53)
* SNAPSHOTSTART (START BACKUP command):  mysql-cluster-backup-using-management-client.
                                                             (line   53)
* socket option:                         connecting.         (line  198)
* socket option, mysql:                  mysql-command-options.
                                                             (line  551)
* socket option, mysql_config:           mysql-config.       (line   52)
* socket option, mysql_convert_table_format: mysql-convert-table-format.
                                                             (line   50)
* socket option, mysql_setpermission:    mysql-setpermission.
                                                             (line   51)
* socket option, mysqladmin:             mysqladmin.         (line  440)
* socket option, mysqlbinlog:            mysqlbinlog.        (line  470)
* socket option, mysqlcheck:             mysqlcheck.         (line  389)
* socket option, mysqld:                 server-options.     (line 2126)
* socket option, mysqld_safe:            mysqld-safe.        (line  257)
* socket option, mysqldump:              mysqldump.          (line 1038)
* socket option, mysqlhotcopy:           mysqlhotcopy.       (line  186)
* socket option, mysqlimport:            mysqlimport.        (line  293)
* socket option, mysqlshow:              mysqlshow.          (line  219)
* socket option, mysqlslap:              mysqlslap.          (line  446)
* socket system variable:                server-system-variables.
                                                             (line 5442)
* Solaris installation problems:         solaris-installation.
                                                             (line   11)
* Solaris troubleshooting:               compilation-problems.
                                                             (line   73)
* Solaris x86_64 issues:                 optimizing-innodb-diskio.
                                                             (line    6)
* Solaris, installation:                 solaris-installation.
                                                             (line   11)
* SOME:                                  any-in-some-subqueries.
                                                             (line    6)
* sort-index option, myisamchk:          myisamchk-other-options.
                                                             (line   36)
* sort-records option, myisamchk:        myisamchk-other-options.
                                                             (line   41)
* sort-recover option, myisamchk:        myisamchk-repair-options.
                                                             (line  116)
* sort_buffer_size myisamchk variable:   myisamchk-general-options.
                                                             (line   53)
* sort_buffer_size system variable:      server-system-variables.
                                                             (line 5468)
* sort_key_blocks myisamchk variable:    myisamchk-general-options.
                                                             (line   53)
* Sorting for group, thread state:       general-thread-states.
                                                             (line  296)
* Sorting for order, thread state:       general-thread-states.
                                                             (line  300)
* Sorting index, thread state:           general-thread-states.
                                                             (line  304)
* Sorting result, thread state:          general-thread-states.
                                                             (line  309)
* sorting, data:                         sorting-rows.       (line    6)
* sorting, grant tables <1>:             request-access.     (line   51)
* sorting, grant tables:                 connection-access.  (line  130)
* sorting, table rows:                   sorting-rows.       (line    6)
* SOUNDEX():                             string-functions.   (line  609)
* SOUNDS LIKE:                           string-functions.   (line  648)
* source (mysql client command) <1>:     mysql-batch-commands.
                                                             (line    6)
* source (mysql client command):         batch-mode.         (line   90)
* source command, mysql:                 mysql-commands.     (line  198)
* source distribution, installing:       source-installation.
                                                             (line   15)
* space ID:                              glossary.           (line 2865)
* SPACE():                               string-functions.   (line  652)
* spassword option, mysqlaccess:         mysqlaccess.        (line  138)
* Spatial Extensions in MySQL:           gis-introduction.   (line    6)
* speed, increasing with replication:    replication.        (line   13)
* speed, inserting:                      insert-speed.       (line    6)
* speed, of queries <1>:                 select-speed.       (line    6)
* speed, of queries:                     select-optimization.
                                                             (line   25)
* spin:                                  glossary.           (line 2882)
* sporadic-binlog-dump-fail option, mysqld: replication-options-binary-log.
                                                             (line  418)
* Spring framework:                      connector-j-usagenotes-spring-config.
                                                             (line   12)
* SQL:                                   glossary.           (line 2889)
* SQL Editor:                            connector-net-sql-editor.
                                                             (line    6)
* SQL mode:                              server-sql-mode.    (line    6)
* SQL mode, ALLOW_INVALID_DATES:         server-sql-mode.    (line  113)
* SQL mode, and partitioning <1>:        partitioning-limitations.
                                                             (line   48)
* SQL mode, and partitioning:            replication-features-sql-mode.
                                                             (line    6)
* SQL mode, and replication:             replication-features-sql-mode.
                                                             (line    6)
* SQL mode, ANSI:                        server-sql-mode.    (line   76)
* SQL mode, ANSI_QUOTES:                 server-sql-mode.    (line  131)
* SQL mode, DB2:                         server-sql-mode.    (line  514)
* SQL mode, ERROR_FOR_DIVISION_BY_ZERO:  server-sql-mode.    (line  139)
* SQL mode, HIGH_NOT_PRECEDENCE:         server-sql-mode.    (line  152)
* SQL mode, IGNORE_SPACE:                server-sql-mode.    (line  167)
* SQL mode, MAXDB:                       server-sql-mode.    (line  519)
* SQL mode, MSSQL:                       server-sql-mode.    (line  525)
* SQL mode, MYSQL323:                    server-sql-mode.    (line  530)
* SQL mode, MYSQL40:                     server-sql-mode.    (line  534)
* SQL mode, NO_AUTO_CREATE_USER:         server-sql-mode.    (line  192)
* SQL mode, NO_AUTO_VALUE_ON_ZERO:       server-sql-mode.    (line  200)
* SQL mode, NO_BACKSLASH_ESCAPES:        server-sql-mode.    (line  219)
* SQL mode, NO_DIR_IN_CREATE:            server-sql-mode.    (line  225)
* SQL mode, NO_ENGINE_SUBSTITUTION:      server-sql-mode.    (line  231)
* SQL mode, NO_FIELD_OPTIONS:            server-sql-mode.    (line  250)
* SQL mode, NO_KEY_OPTIONS:              server-sql-mode.    (line  256)
* SQL mode, NO_TABLE_OPTIONS:            server-sql-mode.    (line  262)
* SQL mode, NO_UNSIGNED_SUBTRACTION:     server-sql-mode.    (line  268)
* SQL mode, NO_ZERO_DATE:                server-sql-mode.    (line  315)
* SQL mode, NO_ZERO_IN_DATE:             server-sql-mode.    (line  321)
* SQL mode, ONLY_FULL_GROUP_BY <1>:      group-by-extensions.
                                                             (line    6)
* SQL mode, ONLY_FULL_GROUP_BY:          server-sql-mode.    (line  330)
* SQL mode, ORACLE:                      server-sql-mode.    (line  538)
* SQL mode, PAD_CHAR_TO_FULL_LENGTH:     server-sql-mode.    (line  368)
* SQL mode, PIPES_AS_CONCAT:             server-sql-mode.    (line  406)
* SQL mode, POSTGRESQL:                  server-sql-mode.    (line  544)
* SQL mode, REAL_AS_FLOAT:               server-sql-mode.    (line  411)
* SQL mode, strict:                      server-sql-mode.    (line  106)
* SQL mode, STRICT_ALL_TABLES:           server-sql-mode.    (line  418)
* SQL mode, STRICT_TRANS_TABLES:         server-sql-mode.    (line   82)
* SQL mode, TRADITIONAL:                 server-sql-mode.    (line   90)
* SQL node (MySQL Cluster), defined:     mysql-cluster-basics.
                                                             (line    6)
* SQL nodes (MySQL Cluster):             mysql-cluster-mysqld.
                                                             (line    6)
* SQL scripts:                           mysql.              (line   15)
* SQL statements relating to MySQL Cluster: mysql-cluster-sql-statements.
                                                             (line    6)
* SQL statements, replication masters:   replication-master-sql.
                                                             (line   12)
* SQL statements, replication slaves:    replication-slave-sql.
                                                             (line   15)
* SQL, defined:                          what-is-mysql.      (line   54)
* SQL-92, extensions to:                 compatibility.      (line   15)
* sql-mode option, mysqld:               server-options.     (line 2152)
* sql_auto_is_null session variable:     server-system-variables.
                                                             (line 5520)
* SQL_BIG_RESULT:                        select.             (line  398)
* sql_big_selects session variable:      server-system-variables.
                                                             (line 5565)
* SQL_BUFFER_RESULT:                     select.             (line  407)
* sql_buffer_result session variable:    server-system-variables.
                                                             (line 5590)
* SQL_CACHE <1>:                         select.             (line  419)
* SQL_CACHE:                             query-cache-in-select.
                                                             (line    9)
* SQL_CALC_FOUND_ROWS:                   select.             (line  414)
* sql_log_bin system variable:           server-system-variables.
                                                             (line 5610)
* sql_log_off system variable:           server-system-variables.
                                                             (line 5632)
* sql_log_update system variable:        server-system-variables.
                                                             (line 5652)
* sql_mode system variable:              server-system-variables.
                                                             (line 5671)
* SQL_NO_CACHE <1>:                      select.             (line  419)
* SQL_NO_CACHE:                          query-cache-in-select.
                                                             (line   14)
* sql_notes session variable:            server-system-variables.
                                                             (line 5720)
* sql_quote_show_create session variable: server-system-variables.
                                                             (line 5730)
* sql_safe_updates session variable:     server-system-variables.
                                                             (line 5739)
* sql_select_limit system variable:      server-system-variables.
                                                             (line 5748)
* sql_slave_skip_counter:                set-global-sql-slave-skip-counter.
                                                             (line    6)
* sql_slave_skip_counter system variable: replication-options-slave.
                                                             (line 1536)
* SQL_SMALL_RESULT:                      select.             (line  398)
* sql_warnings session variable:         server-system-variables.
                                                             (line 5771)
* SQLState error codes:                  connector-j-reference-error-sqlstates.
                                                             (line    6)
* SQRT():                                mathematical-functions.
                                                             (line  531)
* square brackets:                       data-types.         (line   42)
* srcdir option, mysql_install_db:       mysql-install-db.   (line   78)
* SRID():                                general-geometry-property-functions.
                                                             (line   51)
* SSD <1>:                               glossary.           (line 2898)
* SSD:                                   innodb-compression. (line   13)
* SSH:                                   windows-and-ssh.    (line    6)
* SSL <1>:                               connector-j-reference-using-ssl.
                                                             (line    6)
* SSL <2>:                               connector-net-connection-options.
                                                             (line    6)
* SSL:                                   ssl-connections.    (line   14)
* SSL certificates:                      connector-net-connection-options.
                                                             (line    6)
* ssl option:                            ssl-options.        (line   36)
* SSL options:                           connecting.         (line  211)
* SSL options, mysql:                    mysql-command-options.
                                                             (line  556)
* SSL options, mysqladmin:               mysqladmin.         (line  445)
* SSL options, mysqlcheck:               mysqlcheck.         (line  394)
* SSL options, mysqld:                   server-options.     (line 1963)
* SSL options, mysqldump:                mysqldump.          (line 1043)
* SSL options, mysqlimport:              mysqlimport.        (line  298)
* SSL options, mysqlshow:                mysqlshow.          (line  224)
* SSL options, mysqlslap:                mysqlslap.          (line  451)
* SSL related options:                   grant.              (line  522)
* SSL, command options:                  ssl-options.        (line    6)
* SSL, configuring:                      configuring-for-ssl.
                                                             (line    6)
* SSL, establishing connections:         using-ssl-connections.
                                                             (line    6)
* SSL, X509 Basics:                      ssl-basics.         (line    6)
* ssl-ca option:                         ssl-options.        (line   77)
* ssl-capath option:                     ssl-options.        (line   90)
* ssl-cert option:                       ssl-options.        (line  114)
* ssl-cipher option:                     ssl-options.        (line  119)
* ssl-key option:                        ssl-options.        (line  138)
* ssl-verify-server-cert option:         ssl-options.        (line  151)
* ssl_ca system variable:                server-system-variables.
                                                             (line 5777)
* ssl_capath system variable:            server-system-variables.
                                                             (line 5795)
* ssl_cert system variable:              server-system-variables.
                                                             (line 5814)
* ssl_cipher system variable:            server-system-variables.
                                                             (line 5833)
* ssl_key system variable:               server-system-variables.
                                                             (line 5851)
* standalone option, mysqld:             server-options.     (line 1969)
* Standard Monitor, InnoDB:              innodb-monitors.    (line   12)
* Standard SQL, differences from <1>:    grant.              (line  641)
* Standard SQL, differences from:        differences-from-ansi.
                                                             (line   14)
* Standard SQL, extensions to <1>:       extensions-to-ansi. (line    6)
* Standard SQL, extensions to:           compatibility.      (line   15)
* standards compatibility:               compatibility.      (line   15)
* START BACKUP, NOWAIT:                  mysql-cluster-backup-using-management-client.
                                                             (line   31)
* START BACKUP, SNAPSHOTEND:             mysql-cluster-backup-using-management-client.
                                                             (line   53)
* START BACKUP, SNAPSHOTSTART:           mysql-cluster-backup-using-management-client.
                                                             (line   53)
* START BACKUP, syntax:                  mysql-cluster-backup-using-management-client.
                                                             (line   10)
* START BACKUP, WAIT COMPLETED:          mysql-cluster-backup-using-management-client.
                                                             (line   48)
* START BACKUP, WAIT STARTED:            mysql-cluster-backup-using-management-client.
                                                             (line   40)
* START command (MySQL Cluster):         mysql-cluster-mgm-client-commands.
                                                             (line   46)
* START SLAVE:                           start-slave.        (line    6)
* START TRANSACTION:                     commit.             (line    6)
* START, XA transactions:                xa-statements.      (line    6)
* start-datetime option, mysqlbinlog:    mysqlbinlog.        (line  475)
* start-position option, mysqlbinlog:    mysqlbinlog.        (line  489)
* start_row option, mysql_find_rows:     mysql-find-rows.    (line   44)
* StartFailRetryDelay:                   mysql-cluster-ndbd-definition.
                                                             (line 3688)
* StartFailureTimeout:                   mysql-cluster-ndbd-definition.
                                                             (line 1701)
* Starting many servers:                 multiple-servers.   (line   13)
* starting, comments:                    ansi-diff-comments. (line    6)
* starting, mysqld:                      changing-mysql-user.
                                                             (line    6)
* starting, the server:                  unix-postinstallation.
                                                             (line   54)
* starting, the server automatically:    automatic-start.    (line    6)
* StartNoNodeGroupTimeout:               mysql-cluster-ndbd-definition.
                                                             (line 1722)
* StartPartialTimeout:                   mysql-cluster-ndbd-definition.
                                                             (line 1660)
* StartPartitionedTimeout:               mysql-cluster-ndbd-definition.
                                                             (line 1681)
* StartPoint():                          linestring-property-functions.
                                                             (line   93)
* startup:                               glossary.           (line 2905)
* STARTUP Events (MySQL Cluster):        mysql-cluster-log-events.
                                                             (line   62)
* startup options, default:              option-files.       (line    6)
* startup parameters:                    server-parameters.  (line    6)
* startup parameters, mysql:             mysql-command-options.
                                                             (line    6)
* startup parameters, mysqladmin:        mysqladmin.         (line  221)
* startup parameters, tuning:            system-optimization.
                                                             (line    6)
* StartupStatusReportFrequency:          mysql-cluster-ndbd-definition.
                                                             (line 2573)
* statefile option, comp_err:            comp-err.           (line   65)
* statement-based replication:           glossary.           (line 2909)
* statement-based replication, advantages: replication-sbr-rbr.
                                                             (line   24)
* statement-based replication, disadvantages: replication-sbr-rbr.
                                                             (line   36)
* statement-based replication, unsafe statements: replication-sbr-rbr.
                                                             (line   38)
* statements, compound:                  sql-syntax-compound-statements.
                                                             (line   16)
* statements, GRANT:                     adding-users.       (line    6)
* statements, INSERT:                    adding-users.       (line  117)
* statements, replication masters:       replication-master-sql.
                                                             (line   12)
* statements, replication slaves:        replication-slave-sql.
                                                             (line   15)
* statistics:                            glossary.           (line 2914)
* STATISTICS Events (MySQL Cluster):     mysql-cluster-log-events.
                                                             (line  191)
* STATISTICS, INFORMATION_SCHEMA table:  statistics-table.   (line    6)
* Statistics, thread command:            thread-commands.    (line  124)
* statistics, thread state:              general-thread-states.
                                                             (line  314)
* stats option, myisam_ftdump:           myisam-ftdump.      (line   74)
* stats_method myisamchk variable:       myisamchk-general-options.
                                                             (line   53)
* STATUS command (MySQL Cluster):        mysql-cluster-mgm-client-commands.
                                                             (line  118)
* status command, mysql:                 mysql-commands.     (line  203)
* status command, results:               mysqladmin.         (line  170)
* status option, mysqlshow:              mysqlshow.          (line  230)
* status variable, Rpl_semi_sync_master_clients: server-status-variables.
                                                             (line 1285)
* status variable, Rpl_semi_sync_master_net_avg_wait_time: server-status-variables.
                                                             (line 1292)
* status variable, Rpl_semi_sync_master_net_wait_time: server-status-variables.
                                                             (line 1300)
* status variable, Rpl_semi_sync_master_net_waits: server-status-variables.
                                                             (line 1307)
* status variable, Rpl_semi_sync_master_no_times: server-status-variables.
                                                             (line 1314)
* status variable, Rpl_semi_sync_master_no_tx: server-status-variables.
                                                             (line 1322)
* status variable, Rpl_semi_sync_master_status: server-status-variables.
                                                             (line 1330)
* status variable, Rpl_semi_sync_master_timefunc_failures: server-status-variables.
                                                             (line 1341)
* status variable, Rpl_semi_sync_master_tx_avg_wait_time: server-status-variables.
                                                             (line 1349)
* status variable, Rpl_semi_sync_master_tx_wait_time: server-status-variables.
                                                             (line 1357)
* status variable, Rpl_semi_sync_master_tx_waits: server-status-variables.
                                                             (line 1364)
* status variable, Rpl_semi_sync_master_wait_pos_backtraverse: server-status-variables.
                                                             (line 1371)
* status variable, Rpl_semi_sync_master_wait_sessions: server-status-variables.
                                                             (line 1382)
* status variable, Rpl_semi_sync_master_yes_tx: server-status-variables.
                                                             (line 1389)
* status variable, Rpl_semi_sync_slave_status: server-status-variables.
                                                             (line 1397)
* status variable, Rpl_status:           server-status-variables.
                                                             (line 1406)
* status variables <1>:                  show-status.        (line    6)
* status variables:                      server-status-variables.
                                                             (line    6)
* status variables, MySQL Cluster:       mysql-cluster-status-variables.
                                                             (line    6)
* status, tables:                        show-table-status.  (line    6)
* STD():                                 group-by-functions. (line  232)
* STDDEV():                              group-by-functions. (line  240)
* STDDEV_POP():                          group-by-functions. (line  248)
* STDDEV_SAMP():                         group-by-functions. (line  256)
* stemming:                              glossary.           (line 2935)
* STOP command (MySQL Cluster):          mysql-cluster-mgm-client-commands.
                                                             (line   61)
* STOP SLAVE:                            stop-slave.         (line    6)
* stop-datetime option, mysqlbinlog:     mysqlbinlog.        (line  498)
* stop-position option, mysqlbinlog:     mysqlbinlog.        (line  508)
* StopOnError:                           mysql-cluster-ndbd-definition.
                                                             (line 1477)
* stopping, the server:                  automatic-start.    (line    6)
* stopword:                              glossary.           (line 2941)
* stopword list, user-defined:           fulltext-fine-tuning.
                                                             (line   40)
* storage engine:                        glossary.           (line 2947)
* storage engine plugins:                storage-engine-plugins.
                                                             (line    6)
* storage engine, ARCHIVE:               archive-storage-engine.
                                                             (line    6)
* storage engine, InnoDB:                innodb-storage-engine.
                                                             (line   24)
* storage engine, PERFORMANCE_SCHEMA:    performance-schema. (line   21)
* storage engines, and application feature requirements: mysql-cluster-ndb-innodb-usage.
                                                             (line    6)
* storage engines, applications supported: mysql-cluster-ndb-innodb-workloads.
                                                             (line    6)
* storage engines, availability:         mysql-cluster-compared.
                                                             (line   36)
* storage engines, choosing:             storage-engines.    (line   22)
* storage engines, differences between NDB and InnoDB: mysql-cluster-ndb-innodb-engines.
                                                             (line    6)
* storage engines, InnoDB as default:    innodb-default-se.  (line    6)
* storage engines, usage scenarios:      mysql-cluster-ndb-innodb-usage.
                                                             (line    6)
* storage nodes - see data nodes, ndbd:  mysql-cluster-programs-ndbd.
                                                             (line    6)
* storage nodes - see data nodes, ndbd, ndbmtd: mysql-cluster-programs-ndbmtd.
                                                             (line    6)
* storage requirements, data type:       storage-requirements.
                                                             (line    6)
* storage space, minimizing:             data-size.          (line    6)
* storage_engine system variable:        server-system-variables.
                                                             (line 5869)
* stored functions:                      stored-routines.    (line   13)
* stored functions, and INSERT DELAYED:  insert.             (line  230)
* stored procedures:                     stored-routines.    (line   13)
* stored procedures, calling from Connector/Net: connector-net-tutorials-stored-procedures.
                                                             (line    6)
* stored procedures, editing with Visual Studio: connector-net-visual-studio-editing-stored-procedures-and-functions.
                                                             (line    6)
* stored procedures, with Connector/Net: connector-net-programming-stored.
                                                             (line   10)
* stored programs <1>:                   stored-programs-views.
                                                             (line   16)
* stored programs:                       sql-syntax-compound-statements.
                                                             (line   16)
* stored routines, and replication:      replication-features-invoked.
                                                             (line    6)
* stored routines, LAST_INSERT_ID():     stored-routines-last-insert-id.
                                                             (line    6)
* stored routines, metadata:             stored-routines-metadata.
                                                             (line    6)
* stored routines, restrictions:         stored-program-restrictions.
                                                             (line    6)
* storing result in query cache, thread state: query-cache-thread-states.
                                                             (line   29)
* storing row into queue, thread state:  delayed-insert-thread-states.
                                                             (line   39)
* STR_TO_DATE():                         date-and-time-functions.
                                                             (line  814)
* STRAIGHT_JOIN <1>:                     explain.            (line   81)
* STRAIGHT_JOIN <2>:                     join.               (line    6)
* STRAIGHT_JOIN <3>:                     select.             (line  381)
* STRAIGHT_JOIN <4>:                     explain-output.     (line  752)
* STRAIGHT_JOIN <5>:                     using-explain.      (line   25)
* STRAIGHT_JOIN:                         left-join-optimization.
                                                             (line   38)
* STRCMP():                              string-comparison-functions.
                                                             (line  190)
* strict mode <1>:                       glossary.           (line 2960)
* strict mode:                           innodb-other-changes-strict-mode.
                                                             (line    6)
* strict SQL mode:                       server-sql-mode.    (line  106)
* STRICT_ALL_TABLES SQL mode:            server-sql-mode.    (line  418)
* STRICT_TRANS_TABLES SQL mode:          server-sql-mode.    (line   82)
* string collating:                      string-collating.   (line    6)
* string comparison functions:           string-comparison-functions.
                                                             (line    6)
* string comparisons, case sensitivity:  string-comparison-functions.
                                                             (line   17)
* string concatenation <1>:              string-functions.   (line  189)
* string concatenation:                  string-literals.    (line   12)
* string functions:                      string-functions.   (line   11)
* string literal introducer <1>:         charset-literal.    (line   11)
* string literal introducer:             string-literals.    (line   33)
* string replacement, replace utility:   replace-utility.    (line    6)
* string types <1>:                      storage-requirements.
                                                             (line  145)
* string types:                          string-types.       (line   14)
* StringMemory:                          mysql-cluster-ndbd-definition.
                                                             (line  436)
* strings, defined:                      string-literals.    (line    6)
* strings, escape sequences:             string-literals.    (line    6)
* strings, nondelimited:                 date-and-time-literals.
                                                             (line  120)
* striping, defined:                     disk-issues.        (line   40)
* SUBDATE():                             date-and-time-functions.
                                                             (line  877)
* sublist:                               glossary.           (line 2969)
* SUBPARTITION BY KEY, known issues:     partitioning-limitations.
                                                             (line  361)
* subpartitioning:                       partitioning-subpartitions.
                                                             (line    6)
* subpartitions:                         partitioning-subpartitions.
                                                             (line    6)
* subpartitions, known issues:           partitioning-limitations.
                                                             (line  357)
* subqueries:                            subqueries.         (line   20)
* subqueries, correlated:                correlated-subqueries.
                                                             (line    6)
* subqueries, errors:                    subquery-errors.    (line    6)
* subqueries, optimization:              subquery-optimization-with-exists.
                                                             (line    6)
* subqueries, restrictions:              subquery-restrictions.
                                                             (line    6)
* subqueries, rewriting as joins:        rewriting-subqueries.
                                                             (line    6)
* subqueries, with ALL:                  all-subqueries.     (line    6)
* subqueries, with ANY, IN, SOME:        any-in-some-subqueries.
                                                             (line    6)
* subqueries, with EXISTS:               exists-and-not-exists-subqueries.
                                                             (line    6)
* subqueries, with NOT EXISTS:           exists-and-not-exists-subqueries.
                                                             (line    6)
* subqueries, with ROW:                  row-subqueries.     (line    6)
* subquery:                              subqueries.         (line   20)
* subselects:                            subqueries.         (line   20)
* SUBSTR():                              string-functions.   (line  659)
* SUBSTRING():                           string-functions.   (line  664)
* SUBSTRING_INDEX():                     string-functions.   (line  697)
* SUBTIME():                             date-and-time-functions.
                                                             (line  895)
* subtraction (-):                       arithmetic-functions.
                                                             (line   62)
* suffix option, mysqlhotcopy:           mysqlhotcopy.       (line  190)
* SUM():                                 group-by-functions. (line  263)
* SUM(DISTINCT):                         group-by-functions. (line  263)
* super-large-pages option, mysqld:      server-options.     (line 1981)
* superuser:                             default-privileges. (line    6)
* superuser option, mysqlaccess:         mysqlaccess.        (line  148)
* support, for operating systems:        supported-os.       (line    6)
* suppression, default values:           constraint-invalid-data.
                                                             (line    6)
* supremum record:                       glossary.           (line 2975)
* surrogate key:                         glossary.           (line 2982)
* symbolic links <1>:                    windows-symbolic-links.
                                                             (line    6)
* symbolic links:                        symbolic-links.     (line   12)
* symbolic-links option, mysqld:         server-options.     (line 2002)
* symbols-file option, resolve_stack_dump: resolve-stack-dump.
                                                             (line   29)
* SymDifference():                       spatial-operators.  (line   31)
* sync_binlog system variable:           replication-options-binary-log.
                                                             (line  896)
* sync_frm system variable:              server-system-variables.
                                                             (line 5935)
* sync_master_info system variable:      replication-options-slave.
                                                             (line 1559)
* sync_relay_log system variable:        replication-options-slave.
                                                             (line 1593)
* sync_relay_log_info system variable:   replication-options-slave.
                                                             (line 1632)
* synchronization of master and slave, in MySQL Cluster Replication: mysql-cluster-replication-auto-sync.
                                                             (line    6)
* Syncing ndb table schema operation and binlog, thread state: mysql-cluster-thread-states.
                                                             (line   20)
* syntax conventions:                    manual-conventions. (line    8)
* syntax, regular expression:            regexp.             (line    6)
* synthetic key:                         glossary.           (line 2984)
* sys-check option (ndb_index_stat):     mysql-cluster-programs-ndb-index-stat.
                                                             (line  262)
* sys-create option (ndb_index_stat):    mysql-cluster-programs-ndb-index-stat.
                                                             (line  217)
* sys-create-if-not-exist option (ndb_index_stat): mysql-cluster-programs-ndb-index-stat.
                                                             (line  232)
* sys-create-if-not-valid option (ndb_index_stat): mysql-cluster-programs-ndb-index-stat.
                                                             (line  247)
* sys-drop option (ndb_index_stat):      mysql-cluster-programs-ndb-index-stat.
                                                             (line  202)
* sys-skip-events option (ndb_index_stat): mysql-cluster-programs-ndb-index-stat.
                                                             (line  291)
* sys-skip-tables option (ndb_index_stat): mysql-cluster-programs-ndb-index-stat.
                                                             (line  277)
* SYSCONFDIR option, CMake:              source-configuration-options.
                                                             (line  333)
* SYSDATE():                             date-and-time-functions.
                                                             (line  906)
* sysdate-is-now option, mysqld:         server-options.     (line 2200)
* syslog option, mysqld_safe:            mysqld-safe.        (line  262)
* syslog-tag option, mysqld_safe:        mysqld-safe.        (line  271)
* system command, mysql:                 mysql-commands.     (line  210)
* System lock, thread state:             general-thread-states.
                                                             (line  320)
* system optimization:                   system-optimization.
                                                             (line    6)
* system option, ndb_config:             mysql-cluster-programs-ndb-config.
                                                             (line  289)
* system table, optimizer <1>:           select.             (line  387)
* system table, optimizer:               explain-output.     (line  235)
* system tablespace:                     glossary.           (line 2999)
* system variable <1>:                   show-variables.     (line    6)
* system variable:                       using-system-variables.
                                                             (line   11)
* system variable, and replication:      replication-features-variables.
                                                             (line    6)
* system variable, audit_log_buffer_size: audit-log-plugin-options-variables.
                                                             (line   65)
* system variable, audit_log_file:       audit-log-plugin-options-variables.
                                                             (line  102)
* system variable, audit_log_flush:      audit-log-plugin-options-variables.
                                                             (line  126)
* system variable, audit_log_policy:     audit-log-plugin-options-variables.
                                                             (line  149)
* system variable, audit_log_rotate_on_size: audit-log-plugin-options-variables.
                                                             (line  183)
* system variable, audit_log_strategy:   audit-log-plugin-options-variables.
                                                             (line  216)
* system variable, authentication_windows_log_level: server-system-variables.
                                                             (line  638)
* system variable, authentication_windows_use_principal_name: server-system-variables.
                                                             (line  673)
* system variable, auto_increment_increment: replication-options-master.
                                                             (line   26)
* system variable, auto_increment_offset: replication-options-master.
                                                             (line  223)
* system variable, automatic_sp_privileges: server-system-variables.
                                                             (line  764)
* system variable, back_log:             server-system-variables.
                                                             (line  792)
* system variable, basedir:              server-system-variables.
                                                             (line  824)
* system variable, binlog_cache_size:    replication-options-binary-log.
                                                             (line  440)
* system variable, binlog_direct_non_transactional_updates: replication-options-binary-log.
                                                             (line  488)
* system variable, binlog_format:        replication-options-binary-log.
                                                             (line  545)
* system variable, binlog_stmt_cache_size: replication-options-binary-log.
                                                             (line  636)
* system variable, bulk_insert_buffer_size: server-system-variables.
                                                             (line  860)
* system variable, character_set_client: server-system-variables.
                                                             (line  894)
* system variable, character_set_connection: server-system-variables.
                                                             (line  934)
* system variable, character_set_database: server-system-variables.
                                                             (line  950)
* system variable, character_set_filesystem: server-system-variables.
                                                             (line  990)
* system variable, character_set_results: server-system-variables.
                                                             (line 1018)
* system variable, character_set_server: server-system-variables.
                                                             (line 1034)
* system variable, character_set_system: server-system-variables.
                                                             (line 1052)
* system variable, character_sets_dir:   server-system-variables.
                                                             (line 1067)
* system variable, collation_connection: server-system-variables.
                                                             (line 1085)
* system variable, collation_database:   server-system-variables.
                                                             (line 1100)
* system variable, collation_server:     server-system-variables.
                                                             (line 1140)
* system variable, completion_type:      server-system-variables.
                                                             (line 1158)
* system variable, concurrent_insert:    server-system-variables.
                                                             (line 1223)
* system variable, connect_timeout:      server-system-variables.
                                                             (line 1284)
* system variable, datadir:              server-system-variables.
                                                             (line 1308)
* system variable, date_format:          server-system-variables.
                                                             (line 1328)
* system variable, datetime_format:      server-system-variables.
                                                             (line 1332)
* system variable, debug:                server-system-variables.
                                                             (line 1336)
* system variable, debug_sync:           server-system-variables.
                                                             (line 1389)
* system variable, default_storage_engine: server-system-variables.
                                                             (line 1424)
* system variable, default_week_format:  server-system-variables.
                                                             (line 1460)
* system variable, delay_key_write:      server-system-variables.
                                                             (line 1482)
* system variable, delayed_insert_limit: server-system-variables.
                                                             (line 1532)
* system variable, delayed_insert_timeout: server-system-variables.
                                                             (line 1564)
* system variable, delayed_queue_size:   server-system-variables.
                                                             (line 1584)
* system variable, div_precision_increment: server-system-variables.
                                                             (line 1616)
* system variable, engine_condition_pushdown: server-system-variables.
                                                             (line 1655)
* system variable, event_scheduler:      server-system-variables.
                                                             (line 1704)
* system variable, expire_logs_days:     server-system-variables.
                                                             (line 1729)
* system variable, flush:                server-system-variables.
                                                             (line 1776)
* system variable, flush_time:           server-system-variables.
                                                             (line 1799)
* system variable, ft_boolean_syntax:    server-system-variables.
                                                             (line 1842)
* system variable, ft_max_word_len:      server-system-variables.
                                                             (line 1881)
* system variable, ft_min_word_len:      server-system-variables.
                                                             (line 1905)
* system variable, ft_query_expansion_limit: server-system-variables.
                                                             (line 1930)
* system variable, ft_stopword_file:     server-system-variables.
                                                             (line 1951)
* system variable, general_log:          server-system-variables.
                                                             (line 1982)
* system variable, general_log_file:     server-system-variables.
                                                             (line 2005)
* system variable, group_concat_max_len: server-system-variables.
                                                             (line 2026)
* system variable, have_compress:        server-system-variables.
                                                             (line 2056)
* system variable, have_crypt:           server-system-variables.
                                                             (line 2062)
* system variable, have_csv:             server-system-variables.
                                                             (line 2067)
* system variable, have_dynamic_loading: server-system-variables.
                                                             (line 2075)
* system variable, have_geometry:        server-system-variables.
                                                             (line 2080)
* system variable, have_innodb:          server-system-variables.
                                                             (line 2084)
* system variable, have_openssl:         server-system-variables.
                                                             (line 2092)
* system variable, have_partitioning:    server-system-variables.
                                                             (line 2096)
* system variable, have_profiling:       server-system-variables.
                                                             (line 2104)
* system variable, have_query_cache:     server-system-variables.
                                                             (line 2110)
* system variable, have_rtree_keys:      server-system-variables.
                                                             (line 2115)
* system variable, have_ssl:             server-system-variables.
                                                             (line 2120)
* system variable, have_symlink:         server-system-variables.
                                                             (line 2127)
* system variable, hostname:             server-system-variables.
                                                             (line 2135)
* system variable, ignore_builtin_innodb: innodb-parameters. (line  211)
* system variable, init_connect:         server-system-variables.
                                                             (line 2156)
* system variable, init_file:            server-system-variables.
                                                             (line 2197)
* system variable, init_slave:           replication-options-slave.
                                                             (line 1200)
* system variable, innodb_adaptive_flushing: innodb-parameters.
                                                             (line  230)
* system variable, innodb_adaptive_hash_index: innodb-parameters.
                                                             (line  251)
* system variable, innodb_additional_mem_pool_size: innodb-parameters.
                                                             (line  275)
* system variable, innodb_autoextend_increment: innodb-parameters.
                                                             (line  304)
* system variable, innodb_autoinc_lock_mode: innodb-parameters.
                                                             (line  331)
* system variable, innodb_buffer_pool_instances: innodb-parameters.
                                                             (line  358)
* system variable, innodb_buffer_pool_size: innodb-parameters.
                                                             (line  395)
* system variable, innodb_change_buffering: innodb-parameters.
                                                             (line  444)
* system variable, innodb_checksums:     innodb-parameters.  (line  489)
* system variable, innodb_commit_concurrency: innodb-parameters.
                                                             (line  512)
* system variable, innodb_concurrency_tickets: innodb-parameters.
                                                             (line  538)
* system variable, innodb_data_file_path: innodb-parameters. (line  567)
* system variable, innodb_data_home_dir: innodb-parameters.  (line  598)
* system variable, innodb_doublewrite:   innodb-parameters.  (line  621)
* system variable, innodb_fast_shutdown: innodb-parameters.  (line  643)
* system variable, innodb_file_format:   innodb-parameters.  (line  680)
* system variable, innodb_file_format_check: innodb-parameters.
                                                             (line  715)
* system variable, innodb_file_format_max: innodb-parameters.
                                                             (line  765)
* system variable, innodb_file_per_table: innodb-parameters. (line  792)
* system variable, innodb_flush_log_at_trx_commit: innodb-parameters.
                                                             (line  825)
* system variable, innodb_flush_method:  innodb-parameters.  (line  884)
* system variable, innodb_force_recovery: innodb-parameters. (line  972)
* system variable, innodb_io_capacity:   innodb-parameters.  (line 1008)
* system variable, innodb_lock_wait_timeout: innodb-parameters.
                                                             (line 1110)
* system variable, innodb_locks_unsafe_for_binlog: innodb-parameters.
                                                             (line 1157)
* system variable, innodb_log_buffer_size: innodb-parameters.
                                                             (line 1326)
* system variable, innodb_log_file_size: innodb-parameters.  (line 1351)
* system variable, innodb_log_files_in_group: innodb-parameters.
                                                             (line 1381)
* system variable, innodb_log_group_home_dir: innodb-parameters.
                                                             (line 1403)
* system variable, innodb_max_dirty_pages_pct: innodb-parameters.
                                                             (line 1425)
* system variable, innodb_max_purge_lag: innodb-parameters.  (line 1448)
* system variable, innodb_mirrored_log_groups: innodb-parameters.
                                                             (line 1497)
* system variable, innodb_old_blocks_pct: innodb-parameters. (line 1501)
* system variable, innodb_old_blocks_time: innodb-parameters.
                                                             (line 1525)
* system variable, innodb_open_files:    innodb-parameters.  (line 1565)
* system variable, innodb_purge_batch_size: innodb-parameters.
                                                             (line 1625)
* system variable, innodb_purge_threads: innodb-parameters.  (line 1653)
* system variable, innodb_read_ahead_threshold: innodb-parameters.
                                                             (line 1709)
* system variable, innodb_read_io_threads: innodb-parameters.
                                                             (line 1736)
* system variable, innodb_replication_delay: innodb-parameters.
                                                             (line 1766)
* system variable, innodb_rollback_on_timeout: innodb-parameters.
                                                             (line 1787)
* system variable, innodb_spin_wait_delay: innodb-parameters.
                                                             (line 1833)
* system variable, innodb_stats_method:  innodb-parameters.  (line 1856)
* system variable, innodb_stats_on_metadata: innodb-parameters.
                                                             (line 1890)
* system variable, innodb_stats_sample_pages: innodb-parameters.
                                                             (line 1920)
* system variable, innodb_strict_mode:   innodb-parameters.  (line 1943)
* system variable, innodb_support_xa:    innodb-parameters.  (line 1965)
* system variable, innodb_sync_spin_loops: innodb-parameters.
                                                             (line 2004)
* system variable, innodb_table_locks:   innodb-parameters.  (line 2025)
* system variable, innodb_thread_concurrency: innodb-parameters.
                                                             (line 2056)
* system variable, innodb_thread_sleep_delay: innodb-parameters.
                                                             (line 2093)
* system variable, innodb_use_native_aio: innodb-parameters. (line 2113)
* system variable, innodb_use_sys_malloc: innodb-parameters. (line 2146)
* system variable, innodb_version:       innodb-parameters.  (line 2165)
* system variable, innodb_write_io_threads: innodb-parameters.
                                                             (line 2171)
* system variable, interactive_timeout:  server-system-variables.
                                                             (line 2234)
* system variable, join_buffer_size:     server-system-variables.
                                                             (line 2258)
* system variable, keep_files_on_create: server-system-variables.
                                                             (line 2339)
* system variable, key_buffer_size:      server-system-variables.
                                                             (line 2370)
* system variable, key_cache_age_threshold: server-system-variables.
                                                             (line 2457)
* system variable, key_cache_block_size: server-system-variables.
                                                             (line 2490)
* system variable, key_cache_division_limit: server-system-variables.
                                                             (line 2512)
* system variable, language:             server-system-variables.
                                                             (line 2535)
* system variable, large_files_support:  server-system-variables.
                                                             (line 2564)
* system variable, large_page_size:      server-system-variables.
                                                             (line 2596)
* system variable, large_pages:          server-system-variables.
                                                             (line 2576)
* system variable, lc_messages:          server-system-variables.
                                                             (line 2622)
* system variable, lc_messages_dir:      server-system-variables.
                                                             (line 2643)
* system variable, lc_time_names:        server-system-variables.
                                                             (line 2663)
* system variable, license:              server-system-variables.
                                                             (line 2684)
* system variable, local_infile:         server-system-variables.
                                                             (line 2699)
* system variable, lock_wait_timeout:    server-system-variables.
                                                             (line 2716)
* system variable, locked_in_memory:     server-system-variables.
                                                             (line 2766)
* system variable, log:                  server-system-variables.
                                                             (line 2778)
* system variable, log_bin:              replication-options-binary-log.
                                                             (line  683)
* system variable, log_bin_trust_function_creators: server-system-variables.
                                                             (line 2804)
* system variable, log_bin_use_v1_row_events: replication-options-binary-log.
                                                             (line  700)
* system variable, log_error:            server-system-variables.
                                                             (line 2833)
* system variable, log_output:           server-system-variables.
                                                             (line 2852)
* system variable, log_queries_not_using_indexes: server-system-variables.
                                                             (line 2881)
* system variable, log_slave_updates:    replication-options-binary-log.
                                                             (line  748)
* system variable, log_slow_queries:     server-system-variables.
                                                             (line 2900)
* system variable, log_warnings:         server-system-variables.
                                                             (line 2925)
* system variable, long_query_time:      server-system-variables.
                                                             (line 2961)
* system variable, low_priority_updates: server-system-variables.
                                                             (line 2991)
* system variable, lower_case_file_system: server-system-variables.
                                                             (line 3016)
* system variable, lower_case_table_names: server-system-variables.
                                                             (line 3034)
* system variable, max_allowed_packet:   server-system-variables.
                                                             (line 3080)
* system variable, max_binlog_cache_size: replication-options-binary-log.
                                                             (line  769)
* system variable, max_binlog_size:      replication-options-binary-log.
                                                             (line  821)
* system variable, max_binlog_stmt_cache_size: replication-options-binary-log.
                                                             (line  853)
* system variable, max_connect_errors:   server-system-variables.
                                                             (line 3125)
* system variable, max_connections:      server-system-variables.
                                                             (line 3162)
* system variable, max_delayed_threads:  server-system-variables.
                                                             (line 3188)
* system variable, max_error_count:      server-system-variables.
                                                             (line 3218)
* system variable, max_heap_table_size:  server-system-variables.
                                                             (line 3241)
* system variable, max_insert_delayed_threads: server-system-variables.
                                                             (line 3288)
* system variable, max_join_size:        server-system-variables.
                                                             (line 3303)
* system variable, max_length_for_sort_data: server-system-variables.
                                                             (line 3342)
* system variable, max_long_data_size:   server-system-variables.
                                                             (line 3364)
* system variable, max_prepared_stmt_count: server-system-variables.
                                                             (line 3392)
* system variable, max_relay_log_size:   server-system-variables.
                                                             (line 3422)
* system variable, max_seeks_for_key:    server-system-variables.
                                                             (line 3451)
* system variable, max_sort_length:      server-system-variables.
                                                             (line 3486)
* system variable, max_sp_recursion_depth: server-system-variables.
                                                             (line 3509)
* system variable, max_tmp_tables:       server-system-variables.
                                                             (line 3537)
* system variable, max_user_connections: server-system-variables.
                                                             (line 3541)
* system variable, max_write_lock_count: server-system-variables.
                                                             (line 3580)
* system variable, metadata_locks_cache_size: server-system-variables.
                                                             (line 3609)
* system variable, min_examined_row_limit: server-system-variables.
                                                             (line 3631)
* system variable, myisam_data_pointer_size: server-system-variables.
                                                             (line 3661)
* system variable, myisam_max_sort_file_size: server-system-variables.
                                                             (line 3684)
* system variable, myisam_mmap_size:     server-system-variables.
                                                             (line 3718)
* system variable, myisam_recover_options: server-system-variables.
                                                             (line 3751)
* system variable, myisam_repair_threads: server-system-variables.
                                                             (line 3763)
* system variable, myisam_sort_buffer_size: server-system-variables.
                                                             (line 3798)
* system variable, myisam_stats_method:  server-system-variables.
                                                             (line 3837)
* system variable, myisam_use_mmap:      server-system-variables.
                                                             (line 3870)
* system variable, named_pipe:           server-system-variables.
                                                             (line 3888)
* system variable, ndb_log_empty_epochs: mysql-cluster-system-variables.
                                                             (line  964)
* system variable, ndb_log_transaction_id: mysql-cluster-system-variables.
                                                             (line  523)
* system variable, net_buffer_length:    server-system-variables.
                                                             (line 3905)
* system variable, net_read_timeout:     server-system-variables.
                                                             (line 3939)
* system variable, net_retry_count:      server-system-variables.
                                                             (line 3964)
* system variable, net_write_timeout:    server-system-variables.
                                                             (line 3996)
* system variable, new:                  server-system-variables.
                                                             (line 4017)
* system variable, old:                  server-system-variables.
                                                             (line 4040)
* system variable, old_alter_table:      server-system-variables.
                                                             (line 4065)
* system variable, old_passwords:        server-system-variables.
                                                             (line 4090)
* system variable, one_shot:             server-system-variables.
                                                             (line 4137)
* system variable, open_files_limit:     server-system-variables.
                                                             (line 4142)
* system variable, optimizer_prune_level: server-system-variables.
                                                             (line 4167)
* system variable, optimizer_search_depth: server-system-variables.
                                                             (line 4190)
* system variable, optimizer_switch:     server-system-variables.
                                                             (line 4220)
* system variable, performance_schema:   performance-schema-system-variables.
                                                             (line   37)
* system variable, performance_schema_events_waits_history_long_size: performance-schema-system-variables.
                                                             (line   59)
* system variable, performance_schema_events_waits_history_size: performance-schema-system-variables.
                                                             (line   79)
* system variable, performance_schema_max_cond_classes: performance-schema-system-variables.
                                                             (line   99)
* system variable, performance_schema_max_cond_instances: performance-schema-system-variables.
                                                             (line  118)
* system variable, performance_schema_max_file_classes: performance-schema-system-variables.
                                                             (line  137)
* system variable, performance_schema_max_file_handles: performance-schema-system-variables.
                                                             (line  156)
* system variable, performance_schema_max_file_instances: performance-schema-system-variables.
                                                             (line  181)
* system variable, performance_schema_max_mutex_classes: performance-schema-system-variables.
                                                             (line  200)
* system variable, performance_schema_max_mutex_instances: performance-schema-system-variables.
                                                             (line  219)
* system variable, performance_schema_max_rwlock_classes: performance-schema-system-variables.
                                                             (line  238)
* system variable, performance_schema_max_rwlock_instances: performance-schema-system-variables.
                                                             (line  257)
* system variable, performance_schema_max_table_handles: performance-schema-system-variables.
                                                             (line  276)
* system variable, performance_schema_max_table_instances: performance-schema-system-variables.
                                                             (line  295)
* system variable, performance_schema_max_thread_classes: performance-schema-system-variables.
                                                             (line  314)
* system variable, performance_schema_max_thread_instances: performance-schema-system-variables.
                                                             (line  333)
* system variable, pid_file:             server-system-variables.
                                                             (line 4279)
* system variable, plugin_dir:           server-system-variables.
                                                             (line 4298)
* system variable, port:                 server-system-variables.
                                                             (line 4340)
* system variable, preload_buffer_size:  server-system-variables.
                                                             (line 4362)
* system variable, protocol_version:     server-system-variables.
                                                             (line 4399)
* system variable, pseudo_slave_mode:    server-system-variables.
                                                             (line 4432)
* system variable, pseudo_thread_id:     server-system-variables.
                                                             (line 4448)
* system variable, query_alloc_block_size: server-system-variables.
                                                             (line 4462)
* system variable, query_cache_limit:    server-system-variables.
                                                             (line 4498)
* system variable, query_cache_min_res_unit: server-system-variables.
                                                             (line 4527)
* system variable, query_cache_size:     server-system-variables.
                                                             (line 4559)
* system variable, query_cache_type:     server-system-variables.
                                                             (line 4599)
* system variable, query_cache_wlock_invalidate: server-system-variables.
                                                             (line 4644)
* system variable, query_prealloc_size:  server-system-variables.
                                                             (line 4669)
* system variable, range_alloc_block_size: server-system-variables.
                                                             (line 4725)
* system variable, read_buffer_size:     server-system-variables.
                                                             (line 4759)
* system variable, read_only:            server-system-variables.
                                                             (line 4806)
* system variable, read_rnd_buffer_size: server-system-variables.
                                                             (line 4877)
* system variable, relay_log:            replication-options-slave.
                                                             (line 1228)
* system variable, relay_log_index:      replication-options-slave.
                                                             (line 1246)
* system variable, relay_log_info_file:  replication-options-slave.
                                                             (line 1266)
* system variable, relay_log_purge:      server-system-variables.
                                                             (line 4911)
* system variable, relay_log_recovery:   replication-options-slave.
                                                             (line 1286)
* system variable, relay_log_space_limit: server-system-variables.
                                                             (line 4930)
* system variable, report_host:          server-system-variables.
                                                             (line 4958)
* system variable, report_password:      server-system-variables.
                                                             (line 4975)
* system variable, report_port:          server-system-variables.
                                                             (line 4993)
* system variable, report_user:          server-system-variables.
                                                             (line 5015)
* system variable, rpl_semi_sync_master_enabled: server-system-variables.
                                                             (line 5033)
* system variable, rpl_semi_sync_master_timeout: server-system-variables.
                                                             (line 5053)
* system variable, rpl_semi_sync_master_trace_level: server-system-variables.
                                                             (line 5074)
* system variable, rpl_semi_sync_master_wait_no_slave: server-system-variables.
                                                             (line 5102)
* system variable, rpl_semi_sync_slave_enabled: server-system-variables.
                                                             (line 5136)
* system variable, rpl_semi_sync_slave_trace_level: server-system-variables.
                                                             (line 5156)
* system variable, secure_auth:          server-system-variables.
                                                             (line 5175)
* system variable, secure_file_priv:     server-system-variables.
                                                             (line 5207)
* system variable, server_id:            server-system-variables.
                                                             (line 5228)
* system variable, server_id_bits:       mysql-cluster-system-variables.
                                                             (line  984)
* system variable, shared_memory:        server-system-variables.
                                                             (line 5252)
* system variable, shared_memory_base_name: server-system-variables.
                                                             (line 5265)
* system variable, skip_external_locking: server-system-variables.
                                                             (line 5280)
* system variable, skip_name_resolve:    server-system-variables.
                                                             (line 5309)
* system variable, skip_networking:      server-system-variables.
                                                             (line 5334)
* system variable, skip_show_database:   server-system-variables.
                                                             (line 5351)
* system variable, slave_compressed_protocol: replication-options-slave.
                                                             (line 1315)
* system variable, slave_exec_mode:      replication-options-slave.
                                                             (line 1334)
* system variable, slave_load_tmpdir:    replication-options-slave.
                                                             (line 1367)
* system variable, slave_max_allowed_packet: replication-options-slave.
                                                             (line 1387)
* system variable, slave_net_timeout:    replication-options-slave.
                                                             (line 1420)
* system variable, slave_skip_errors:    replication-options-slave.
                                                             (line 1440)
* system variable, slave_transaction_retries: replication-options-slave.
                                                             (line 1468)
* system variable, slave_type_conversions: replication-options-slave.
                                                             (line 1504)
* system variable, slow_launch_time:     server-system-variables.
                                                             (line 5377)
* system variable, slow_query_log:       server-system-variables.
                                                             (line 5396)
* system variable, slow_query_log_file:  server-system-variables.
                                                             (line 5422)
* system variable, socket:               server-system-variables.
                                                             (line 5442)
* system variable, sort_buffer_size:     server-system-variables.
                                                             (line 5468)
* system variable, sql_log_bin:          server-system-variables.
                                                             (line 5610)
* system variable, sql_log_off:          server-system-variables.
                                                             (line 5632)
* system variable, sql_log_update:       server-system-variables.
                                                             (line 5652)
* system variable, sql_mode:             server-system-variables.
                                                             (line 5671)
* system variable, sql_select_limit:     server-system-variables.
                                                             (line 5748)
* system variable, sql_slave_skip_counter: replication-options-slave.
                                                             (line 1536)
* system variable, ssl_ca:               server-system-variables.
                                                             (line 5777)
* system variable, ssl_capath:           server-system-variables.
                                                             (line 5795)
* system variable, ssl_cert:             server-system-variables.
                                                             (line 5814)
* system variable, ssl_cipher:           server-system-variables.
                                                             (line 5833)
* system variable, ssl_key:              server-system-variables.
                                                             (line 5851)
* system variable, storage_engine:       server-system-variables.
                                                             (line 5869)
* system variable, sync_binlog:          replication-options-binary-log.
                                                             (line  896)
* system variable, sync_frm:             server-system-variables.
                                                             (line 5935)
* system variable, sync_master_info:     replication-options-slave.
                                                             (line 1559)
* system variable, sync_relay_log:       replication-options-slave.
                                                             (line 1593)
* system variable, sync_relay_log_info:  replication-options-slave.
                                                             (line 1632)
* system variable, system_time_zone:     server-system-variables.
                                                             (line 5956)
* system variable, sysvar_stored_program_cache: server-system-variables.
                                                             (line 5900)
* system variable, table_definition_cache: server-system-variables.
                                                             (line 5982)
* system variable, table_lock_wait_timeout: server-system-variables.
                                                             (line 6005)
* system variable, table_open_cache:     server-system-variables.
                                                             (line 6026)
* system variable, table_type:           server-system-variables.
                                                             (line 6051)
* system variable, thread_cache_size:    server-system-variables.
                                                             (line 6056)
* system variable, thread_concurrency:   server-system-variables.
                                                             (line 6089)
* system variable, thread_handling:      server-system-variables.
                                                             (line 6114)
* system variable, thread_pool_algorithm: server-system-variables.
                                                             (line 6152)
* system variable, thread_pool_high_priority_connection: server-system-variables.
                                                             (line 6187)
* system variable, thread_pool_max_unused_threads: server-system-variables.
                                                             (line 6216)
* system variable, thread_pool_prio_kickup_timer: server-system-variables.
                                                             (line 6256)
* system variable, thread_pool_size:     server-system-variables.
                                                             (line 6284)
* system variable, thread_pool_stall_limit: server-system-variables.
                                                             (line 6314)
* system variable, thread_stack:         server-system-variables.
                                                             (line 6348)
* system variable, time_format:          server-system-variables.
                                                             (line 6386)
* system variable, time_zone:            server-system-variables.
                                                             (line 6390)
* system variable, timed_mutexes:        server-system-variables.
                                                             (line 6410)
* system variable, tmp_table_size:       server-system-variables.
                                                             (line 6448)
* system variable, tmpdir:               server-system-variables.
                                                             (line 6485)
* system variable, transaction_alloc_block_size: server-system-variables.
                                                             (line 6520)
* system variable, transaction_prealloc_size: server-system-variables.
                                                             (line 6555)
* system variable, tx_isolation:         server-system-variables.
                                                             (line 6598)
* system variable, updatable_views_with_limit: server-system-variables.
                                                             (line 6659)
* system variable, version:              server-system-variables.
                                                             (line 6691)
* system variable, version_comment:      server-system-variables.
                                                             (line 6699)
* system variable, version_compile_machine: server-system-variables.
                                                             (line 6716)
* system variable, version_compile_os:   server-system-variables.
                                                             (line 6730)
* system variable, wait_timeout:         server-system-variables.
                                                             (line 6744)
* system variables:                      server-system-variables.
                                                             (line    6)
* system, privilege:                     privilege-system.   (line   16)
* system, security:                      general-security-issues.
                                                             (line   16)
* system_time_zone system variable:      server-system-variables.
                                                             (line 5956)
* SYSTEM_USER():                         information-functions.
                                                             (line  569)
* sysvar_stored_program_cache system variable: server-system-variables.
                                                             (line 5900)
* tab (\t) <1>:                          load-data.          (line  413)
* tab (\t):                              string-literals.    (line   74)
* tab option (ndb_restore):              mysql-cluster-programs-ndb-restore.
                                                             (line  444)
* tab option, mysqldump:                 mysqldump.          (line 1049)
* table:                                 glossary.           (line 3031)
* Table 'mysql.proxies_priv' doesn't exist <1>: upgrading-from-5-4.
                                                             (line  113)
* Table 'mysql.proxies_priv' doesn't exist: upgrading-from-previous-series.
                                                             (line  159)
* table aliases:                         select.             (line  162)
* table cache <1>:                       connector-net-programming-tablecaching.
                                                             (line    6)
* table cache:                           table-cache.        (line    6)
* table description, myisamchk:          myisamchk-table-info.
                                                             (line    6)
* Table Designer:                        connector-net-visual-studio-editing-tables.
                                                             (line   14)
* Table Dump, thread command:            thread-commands.    (line  128)
* table is full <1>:                     full-table.         (line    6)
* table is full:                         server-system-variables.
                                                             (line  847)
* Table is full errors (MySQL Cluster):  mysql-cluster-ndbd-definition.
                                                             (line  355)
* table lock:                            glossary.           (line 3063)
* Table lock, thread state:              general-thread-states.
                                                             (line  333)
* Table Monitor, InnoDB <1>:             innodb-troubleshooting-datadict.
                                                             (line   58)
* Table Monitor, InnoDB:                 innodb-monitors.    (line   12)
* table names, case sensitivity <1>:     identifier-case-sensitivity.
                                                             (line    6)
* table names, case sensitivity:         extensions-to-ansi. (line   38)
* table option, mysql:                   mysql-command-options.
                                                             (line  562)
* table option, mysqlaccess:             mysqlaccess.        (line  152)
* table option, ndb_desc:                mysql-cluster-programs-ndb-desc.
                                                             (line  312)
* table scan:                            innodb-performance-midpoint_insertion.
                                                             (line    6)
* table type:                            glossary.           (line 3072)
* table type, choosing:                  storage-engines.    (line   22)
* table, changing <1>:                   alter-table-problems.
                                                             (line    6)
* table, changing:                       alter-table.        (line   12)
* table, deleting:                       drop-table.         (line    6)
* table, rebuilding:                     rebuilding-tables.  (line    6)
* table, repair:                         rebuilding-tables.  (line    6)
* table, row size:                       storage-requirements.
                                                             (line   24)
* table-level locking:                   internal-locking.   (line    6)
* table_definition_cache system variable: server-system-variables.
                                                             (line 5982)
* table_lock_wait_timeout system variable: server-system-variables.
                                                             (line 6005)
* table_open_cache:                      table-cache.        (line    6)
* table_open_cache system variable:      server-system-variables.
                                                             (line 6026)
* TABLE_PRIVILEGES, INFORMATION_SCHEMA table: table-privileges-table.
                                                             (line    6)
* table_type system variable:            server-system-variables.
                                                             (line 6051)
* TableDirect commands:                  connector-net-connection-options.
                                                             (line    6)
* tables option, mysqlcheck:             mysqlcheck.         (line  400)
* tables option, mysqldump:              mysqldump.          (line 1073)
* tables, BLACKHOLE:                     blackhole-storage-engine.
                                                             (line    6)
* tables, checking:                      myisamchk-check-options.
                                                             (line    6)
* tables, closing:                       table-cache.        (line    6)
* tables, compressed:                    myisampack.         (line    6)
* tables, compressed format:             compressed-format.  (line    6)
* tables, const:                         explain-output.     (line  240)
* tables, constant:                      where-optimizations.
                                                             (line   89)
* tables, copying <1>:                   create-table-select.
                                                             (line    6)
* tables, copying:                       create-table.       (line 1407)
* tables, counting rows:                 counting-rows.      (line    6)
* tables, creating:                      creating-tables.    (line    6)
* tables, CSV:                           csv-storage-engine. (line   11)
* tables, defragment:                    dynamic-format.     (line   16)
* tables, defragmenting <1>:             optimize-table.     (line    6)
* tables, defragmenting:                 myisam-maintenance-schedule.
                                                             (line   39)
* tables, deleting rows:                 deleting-from-related-tables.
                                                             (line    6)
* tables, displaying:                    mysqlshow.          (line    6)
* tables, displaying status:             show-table-status.  (line    6)
* tables, dumping <1>:                   mysqlhotcopy.       (line    6)
* tables, dumping:                       mysqldump.          (line    6)
* tables, dynamic:                       dynamic-format.     (line    6)
* tables, error checking:                myisam-check.       (line    6)
* tables, EXAMPLE:                       example-storage-engine.
                                                             (line    6)
* tables, FEDERATED:                     federated-storage-engine.
                                                             (line   13)
* tables, flush:                         mysqladmin.         (line  195)
* tables, fragmentation:                 optimize-table.     (line    6)
* tables, HEAP:                          memory-storage-engine.
                                                             (line    6)
* tables, host:                          request-access.     (line  148)
* tables, improving performance:         data-size.          (line    6)
* tables, information:                   myisamchk-table-info.
                                                             (line    6)
* tables, information about:             getting-information.
                                                             (line    6)
* TABLES, INFORMATION_SCHEMA table:      tables-table.       (line    6)
* tables, InnoDB:                        innodb-storage-engine.
                                                             (line   24)
* tables, loading data:                  loading-tables.     (line    6)
* tables, maintenance:                   mysqlcheck.         (line    6)
* tables, maintenance schedule:          myisam-maintenance-schedule.
                                                             (line    6)
* tables, maximum size:                  table-size-limit.   (line    6)
* tables, MEMORY:                        memory-storage-engine.
                                                             (line    6)
* tables, MERGE:                         merge-storage-engine.
                                                             (line   11)
* tables, merging:                       merge-storage-engine.
                                                             (line   11)
* tables, multiple:                      multiple-tables.    (line    6)
* tables, MyISAM:                        myisam-storage-engine.
                                                             (line   13)
* tables, names:                         identifiers.        (line   13)
* tables, open:                          table-cache.        (line    6)
* tables, opening:                       table-cache.        (line    6)
* tables, optimizing:                    myisam-optimization.
                                                             (line    6)
* tables, partitioning:                  merge-storage-engine.
                                                             (line   11)
* tables, repair:                        mysqlcheck.         (line    6)
* tables, repairing:                     myisam-repair.      (line    6)
* tables, retrieving data:               retrieving-data.    (line   18)
* tables, selecting columns:             selecting-columns.  (line    6)
* tables, selecting rows:                selecting-rows.     (line    6)
* tables, sorting rows:                  sorting-rows.       (line    6)
* tables, symbolic links:                symbolic-links-to-tables.
                                                             (line    6)
* tables, system:                        explain-output.     (line  235)
* tables, too many:                      creating-many-tables.
                                                             (line    6)
* tables, unique ID for last row:        getting-unique-id.  (line    6)
* tablespace:                            glossary.           (line 3076)
* tablespace dictionary:                 glossary.           (line 3099)
* Tablespace Monitor, InnoDB <1>:        innodb-monitors.    (line   12)
* Tablespace Monitor, InnoDB <2>:        innodb-file-space.  (line   60)
* Tablespace Monitor, InnoDB:            innodb-backup.      (line  114)
* TABLESPACE, INFORMATION_SCHEMA table:  tablespaces-table.  (line    6)
* TAN():                                 mathematical-functions.
                                                             (line  542)
* tar, problems on Solaris:              solaris-installation.
                                                             (line   11)
* tc-heuristic-recover option, mysqld:   server-options.     (line 2220)
* Tcl API:                               apis-tcl.           (line    6)
* tcp-ip option, mysqld_multi:           mysqld-multi.       (line  140)
* TCP/IP <1>:                            mysql-command-options.
                                                             (line  442)
* TCP/IP <2>:                            windows-testing.    (line    6)
* TCP/IP:                                windows-select-server.
                                                             (line   29)
* TCP_RCV_BUF_SIZE:                      mysql-cluster-tcp-definition.
                                                             (line  188)
* TCP_SND_BUF_SIZE:                      mysql-cluster-tcp-definition.
                                                             (line  201)
* tee command, mysql:                    mysql-commands.     (line  216)
* tee option, mysql:                     mysql-command-options.
                                                             (line  568)
* temp-pool option, mysqld:              server-options.     (line 2236)
* temporary file, write access:          mysql-install-db-problems.
                                                             (line   70)
* temporary files:                       temporary-files.    (line    6)
* temporary table:                       glossary.           (line 3107)
* temporary tables, and replication:     replication-features-temptables.
                                                             (line    6)
* temporary tables, internal:            internal-temporary-tables.
                                                             (line    6)
* temporary tables, problems:            temporary-table-problems.
                                                             (line    6)
* temporary tablespace:                  glossary.           (line 3121)
* terminal monitor, defined:             tutorial.           (line   16)
* test option, myisampack:               myisampack.         (line   97)
* testing mysqld, mysqltest:             mysql-test-suite.   (line    6)
* testing, connection to the server:     connection-access.  (line    6)
* testing, installation:                 unix-postinstallation.
                                                             (line   54)
* testing, of MySQL releases:            choosing-version.   (line  110)
* testing, postinstallation:             postinstallation.   (line   11)
* text collection:                       glossary.           (line 3143)
* TEXT columns, default values:          blob.               (line   52)
* TEXT columns, indexing <1>:            create-table.       (line  489)
* TEXT columns, indexing:                column-indexes.     (line   18)
* TEXT data type <1>:                    blob.               (line    6)
* TEXT data type:                        string-type-overview.
                                                             (line  191)
* text files, importing <1>:             load-data.          (line    6)
* text files, importing <2>:             mysqlimport.        (line    6)
* text files, importing:                 mysql-batch-commands.
                                                             (line    6)
* TEXT, size:                            storage-requirements.
                                                             (line  190)
* thread:                                glossary.           (line 3145)
* thread cache:                          connection-threads. (line    6)
* thread command, Binlog Dump:           thread-commands.    (line    8)
* thread command, Change user:           thread-commands.    (line   13)
* thread command, Close stmt:            thread-commands.    (line   17)
* thread command, Connect:               thread-commands.    (line   21)
* thread command, Connect Out:           thread-commands.    (line   25)
* thread command, Create DB:             thread-commands.    (line   29)
* thread command, Daemon:                thread-commands.    (line   33)
* thread command, Debug:                 thread-commands.    (line   38)
* thread command, Delayed insert:        thread-commands.    (line   42)
* thread command, Drop DB:               thread-commands.    (line   46)
* thread command, Error:                 thread-commands.    (line   50)
* thread command, Execute:               thread-commands.    (line   52)
* thread command, Fetch:                 thread-commands.    (line   56)
* thread command, Field List:            thread-commands.    (line   61)
* thread command, Init DB:               thread-commands.    (line   65)
* thread command, Kill:                  thread-commands.    (line   69)
* thread command, Long Data:             thread-commands.    (line   73)
* thread command, Ping:                  thread-commands.    (line   78)
* thread command, Prepare:               thread-commands.    (line   82)
* thread command, Processlist:           thread-commands.    (line   86)
* thread command, Query:                 thread-commands.    (line   90)
* thread command, Quit:                  thread-commands.    (line   94)
* thread command, Refresh:               thread-commands.    (line   98)
* thread command, Register Slave:        thread-commands.    (line  103)
* thread command, Reset stmt:            thread-commands.    (line  107)
* thread command, Set option:            thread-commands.    (line  111)
* thread command, Shutdown:              thread-commands.    (line  116)
* thread command, Sleep:                 thread-commands.    (line  120)
* thread command, Statistics:            thread-commands.    (line  124)
* thread command, Table Dump:            thread-commands.    (line  128)
* thread command, Time:                  thread-commands.    (line  132)
* thread commands:                       thread-commands.    (line    6)
* thread state, After create:            general-thread-states.
                                                             (line   11)
* thread state, allocating local table:  delayed-insert-thread-states.
                                                             (line   17)
* thread state, Analyzing:               general-thread-states.
                                                             (line   18)
* thread state, Changing master:         slave-connection-thread-states.
                                                             (line    9)
* thread state, Checking master version: slave-io-thread-states.
                                                             (line   20)
* thread state, checking permissions:    general-thread-states.
                                                             (line   23)
* thread state, checking privileges on cached query: query-cache-thread-states.
                                                             (line    9)
* thread state, checking query cache for query: query-cache-thread-states.
                                                             (line   14)
* thread state, Checking table:          general-thread-states.
                                                             (line   28)
* thread state, cleaning up:             general-thread-states.
                                                             (line   32)
* thread state, Clearing:                event-scheduler-thread-states.
                                                             (line   10)
* thread state, closing tables:          general-thread-states.
                                                             (line   37)
* thread state, Committing events to binlog: mysql-cluster-thread-states.
                                                             (line    6)
* thread state, Connecting to master:    slave-io-thread-states.
                                                             (line   16)
* thread state, converting HEAP to MyISAM: general-thread-states.
                                                             (line   44)
* thread state, copy to tmp table:       general-thread-states.
                                                             (line   49)
* thread state, Copying to group table:  general-thread-states.
                                                             (line   55)
* thread state, Copying to tmp table:    general-thread-states.
                                                             (line   60)
* thread state, Copying to tmp table on disk: general-thread-states.
                                                             (line   64)
* thread state, Creating delayed handler: delayed-insert-thread-states.
                                                             (line   22)
* thread state, Creating index:          general-thread-states.
                                                             (line   72)
* thread state, Creating sort index:     general-thread-states.
                                                             (line   77)
* thread state, creating table:          general-thread-states.
                                                             (line   82)
* thread state, Creating tmp table:      general-thread-states.
                                                             (line   87)
* thread state, deleting from main table: general-thread-states.
                                                             (line   94)
* thread state, deleting from reference tables: general-thread-states.
                                                             (line  100)
* thread state, discard_or_import_tablespace: general-thread-states.
                                                             (line  105)
* thread state, end:                     general-thread-states.
                                                             (line  110)
* thread state, executing:               general-thread-states.
                                                             (line  117)
* thread state, Execution of init_command: general-thread-states.
                                                             (line  121)
* thread state, Finished reading one binlog; switching to next binlog: master-thread-states.
                                                             (line   17)
* thread state, Flushing tables:         general-thread-states.
                                                             (line  132)
* thread state, freeing items:           general-thread-states.
                                                             (line  126)
* thread state, FULLTEXT initialization: general-thread-states.
                                                             (line  137)
* thread state, got handler lock:        delayed-insert-thread-states.
                                                             (line   26)
* thread state, got old table:           delayed-insert-thread-states.
                                                             (line   32)
* thread state, init:                    general-thread-states.
                                                             (line  142)
* thread state, Initialized:             event-scheduler-thread-states.
                                                             (line   15)
* thread state, insert:                  delayed-insert-thread-states.
                                                             (line   72)
* thread state, invalidating query cache entries: query-cache-thread-states.
                                                             (line   19)
* thread state, Killed:                  general-thread-states.
                                                             (line  158)
* thread state, Killing slave:           slave-connection-thread-states.
                                                             (line   14)
* thread state, Locked:                  general-thread-states.
                                                             (line  167)
* thread state, logging slow query:      general-thread-states.
                                                             (line  175)
* thread state, login:                   general-thread-states.
                                                             (line  184)
* thread state, Making temp file:        slave-sql-thread-states.
                                                             (line   18)
* thread state, manage keys:             general-thread-states.
                                                             (line  189)
* thread state, Master has sent all binlog to slave; waiting for binlog to be updated: master-thread-states.
                                                             (line   22)
* thread state, NULL:                    general-thread-states.
                                                             (line  179)
* thread state, Opening master dump table: slave-connection-thread-states.
                                                             (line   18)
* thread state, Opening mysql.ndb_apply_status: mysql-cluster-thread-states.
                                                             (line    8)
* thread state, Opening table:           general-thread-states.
                                                             (line  193)
* thread state, Opening tables:          general-thread-states.
                                                             (line  193)
* thread state, optimizing:              general-thread-states.
                                                             (line  202)
* thread state, preparing:               general-thread-states.
                                                             (line  206)
* thread state, Processing events:       mysql-cluster-thread-states.
                                                             (line   10)
* thread state, Processing events from schema table: mysql-cluster-thread-states.
                                                             (line   14)
* thread state, Purging old relay logs:  general-thread-states.
                                                             (line  210)
* thread state, query end:               general-thread-states.
                                                             (line  214)
* thread state, Queueing master event to the relay log: slave-io-thread-states.
                                                             (line   57)
* thread state, Reading event from the relay log: slave-sql-thread-states.
                                                             (line   13)
* thread state, Reading from net:        general-thread-states.
                                                             (line  219)
* thread state, Reading master dump table data: slave-connection-thread-states.
                                                             (line   22)
* thread state, Rebuilding the index on master dump table: slave-connection-thread-states.
                                                             (line   26)
* thread state, Reconnecting after a failed binlog dump request: slave-io-thread-states.
                                                             (line   45)
* thread state, Reconnecting after a failed master event read: slave-io-thread-states.
                                                             (line   69)
* thread state, Registering slave on master: slave-io-thread-states.
                                                             (line   25)
* thread state, Removing duplicates:     general-thread-states.
                                                             (line  223)
* thread state, removing tmp table:      general-thread-states.
                                                             (line  230)
* thread state, rename:                  general-thread-states.
                                                             (line  236)
* thread state, rename result table:     general-thread-states.
                                                             (line  240)
* thread state, Reopen tables:           general-thread-states.
                                                             (line  246)
* thread state, Repair by sorting:       general-thread-states.
                                                             (line  252)
* thread state, Repair done:             general-thread-states.
                                                             (line  256)
* thread state, Repair with keycache:    general-thread-states.
                                                             (line  261)
* thread state, Requesting binlog dump:  slave-io-thread-states.
                                                             (line   30)
* thread state, reschedule:              delayed-insert-thread-states.
                                                             (line   76)
* thread state, Rolling back:            general-thread-states.
                                                             (line  266)
* thread state, Saving state:            general-thread-states.
                                                             (line  270)
* thread state, Searching rows for update: general-thread-states.
                                                             (line  277)
* thread state, Sending binlog event to slave: master-thread-states.
                                                             (line   11)
* thread state, sending cached result to client: query-cache-thread-states.
                                                             (line   24)
* thread state, setup:                   general-thread-states.
                                                             (line  291)
* thread state, Shutting down:           mysql-cluster-thread-states.
                                                             (line   18)
* thread state, Slave has read all relay log; waiting for the slave I/O thread to update it: slave-sql-thread-states.
                                                             (line   24)
* thread state, Sorting for group:       general-thread-states.
                                                             (line  296)
* thread state, Sorting for order:       general-thread-states.
                                                             (line  300)
* thread state, Sorting index:           general-thread-states.
                                                             (line  304)
* thread state, Sorting result:          general-thread-states.
                                                             (line  309)
* thread state, statistics:              general-thread-states.
                                                             (line  314)
* thread state, storing result in query cache: query-cache-thread-states.
                                                             (line   29)
* thread state, storing row into queue:  delayed-insert-thread-states.
                                                             (line   39)
* thread state, Syncing ndb table schema operation and binlog: mysql-cluster-thread-states.
                                                             (line   20)
* thread state, System lock:             general-thread-states.
                                                             (line  320)
* thread state, Table lock:              general-thread-states.
                                                             (line  333)
* thread state, update:                  general-thread-states.
                                                             (line  341)
* thread state, Updating:                general-thread-states.
                                                             (line  345)
* thread state, updating main table:     general-thread-states.
                                                             (line  349)
* thread state, updating reference tables: general-thread-states.
                                                             (line  355)
* thread state, upgrading lock:          delayed-insert-thread-states.
                                                             (line   81)
* thread state, User lock:               general-thread-states.
                                                             (line  360)
* thread state, User sleep:              general-thread-states.
                                                             (line  367)
* thread state, Waiting for all running commits to finish: general-thread-states.
                                                             (line  371)
* thread state, Waiting for commit lock: general-thread-states.
                                                             (line  377)
* thread state, waiting for delay_list:  delayed-insert-thread-states.
                                                             (line   44)
* thread state, Waiting for event from ndbcluster: mysql-cluster-thread-states.
                                                             (line   25)
* thread state, Waiting for first event from ndbcluster: mysql-cluster-thread-states.
                                                             (line   30)
* thread state, Waiting for global metadata lock: general-thread-states.
                                                             (line  414)
* thread state, Waiting for global read lock: general-thread-states.
                                                             (line  384)
* thread state, waiting for handler insert: delayed-insert-thread-states.
                                                             (line   51)
* thread state, waiting for handler lock: delayed-insert-thread-states.
                                                             (line   56)
* thread state, waiting for handler open: delayed-insert-thread-states.
                                                             (line   62)
* thread state, Waiting for INSERT:      delayed-insert-thread-states.
                                                             (line   86)
* thread state, Waiting for master to send event: slave-io-thread-states.
                                                             (line   49)
* thread state, Waiting for master update: slave-io-thread-states.
                                                             (line   12)
* thread state, Waiting for ndbcluster binlog update to reach current position: mysql-cluster-thread-states.
                                                             (line   32)
* thread state, Waiting for ndbcluster to start: mysql-cluster-thread-states.
                                                             (line   34)
* thread state, Waiting for next activation: event-scheduler-thread-states.
                                                             (line   20)
* thread state, Waiting for query cache lock: query-cache-thread-states.
                                                             (line   33)
* thread state, Waiting for release of readlock: general-thread-states.
                                                             (line  389)
* thread state, Waiting for scheduler to stop: event-scheduler-thread-states.
                                                             (line   25)
* thread state, Waiting for schema epoch: mysql-cluster-thread-states.
                                                             (line   36)
* thread state, Waiting for schema metadata lock: general-thread-states.
                                                             (line  414)
* thread state, Waiting for slave mutex on exit <1>: slave-sql-thread-states.
                                                             (line   31)
* thread state, Waiting for slave mutex on exit: slave-io-thread-states.
                                                             (line   83)
* thread state, Waiting for stored function metadata lock: general-thread-states.
                                                             (line  414)
* thread state, Waiting for stored procedure metadata lock: general-thread-states.
                                                             (line  414)
* thread state, Waiting for table:       general-thread-states.
                                                             (line  396)
* thread state, Waiting for table level lock: general-thread-states.
                                                             (line  414)
* thread state, Waiting for table metadata lock: general-thread-states.
                                                             (line  414)
* thread state, Waiting for tables:      general-thread-states.
                                                             (line  396)
* thread state, Waiting for the next event in relay log: slave-sql-thread-states.
                                                             (line    9)
* thread state, Waiting for the slave SQL thread to free enough relay log space: slave-io-thread-states.
                                                             (line   75)
* thread state, Waiting for trigger metadata lock: general-thread-states.
                                                             (line  414)
* thread state, Waiting on cond:         general-thread-states.
                                                             (line  438)
* thread state, Waiting on empty queue:  event-scheduler-thread-states.
                                                             (line   30)
* thread state, Waiting to finalize termination: master-thread-states.
                                                             (line   30)
* thread state, Waiting to get readlock: general-thread-states.
                                                             (line  443)
* thread state, Waiting to reconnect after a failed binlog dump request: slave-io-thread-states.
                                                             (line   37)
* thread state, Waiting to reconnect after a failed master event read: slave-io-thread-states.
                                                             (line   62)
* thread state, Writing to net:          general-thread-states.
                                                             (line  450)
* thread states:                         thread-information. (line   19)
* thread states, delayed inserts:        delayed-insert-thread-states.
                                                             (line    6)
* thread states, event scheduler:        event-scheduler-thread-states.
                                                             (line    6)
* thread states, general:                general-thread-states.
                                                             (line    6)
* thread states, MySQL Cluster:          mysql-cluster-thread-states.
                                                             (line    6)
* thread states, query cache:            query-cache-thread-states.
                                                             (line    6)
* thread states, replication master:     master-thread-states.
                                                             (line    6)
* thread states, replication slave <1>:  slave-connection-thread-states.
                                                             (line    6)
* thread states, replication slave <2>:  slave-sql-thread-states.
                                                             (line    6)
* thread states, replication slave:      slave-io-thread-states.
                                                             (line    6)
* thread support:                        supported-os.       (line    6)
* thread_cache_size system variable:     server-system-variables.
                                                             (line 6056)
* thread_concurrency system variable:    server-system-variables.
                                                             (line 6089)
* thread_handling system variable:       server-system-variables.
                                                             (line 6114)
* thread_pool_algorithm system variable: server-system-variables.
                                                             (line 6152)
* thread_pool_high_priority_connection system variable: server-system-variables.
                                                             (line 6187)
* thread_pool_max_unused_threads system variable: server-system-variables.
                                                             (line 6216)
* thread_pool_prio_kickup_timer system variable: server-system-variables.
                                                             (line 6256)
* thread_pool_size system variable:      server-system-variables.
                                                             (line 6284)
* thread_pool_stall_limit system variable: server-system-variables.
                                                             (line 6314)
* thread_stack system variable:          server-system-variables.
                                                             (line 6348)
* threadblocks, ndbinfo table:           mysql-cluster-ndbinfo-threadblocks.
                                                             (line    6)
* ThreadConfig:                          mysql-cluster-ndbd-definition.
                                                             (line 3066)
* threaded clients:                      c-api-threaded-clients.
                                                             (line    6)
* ThreadPool:                            mysql-cluster-ndbd-definition.
                                                             (line 3260)
* threads <1>:                           mysql-internals.    (line   11)
* threads <2>:                           show-processlist.   (line    6)
* threads:                               mysqladmin.         (line  177)
* threads table, performance_schema:     threads-table.      (line    6)
* threads, display:                      show-processlist.   (line    6)
* threads, monitoring <1>:               processlist-table.  (line    6)
* threads, monitoring <2>:               show-processlist.   (line    6)
* threads, monitoring:                   thread-information. (line   19)
* threadstat, ndbinfo table:             mysql-cluster-ndbinfo-threadstat.
                                                             (line    6)
* TIME columns, with Connector/Net:      connector-net-programming-datetime.
                                                             (line   14)
* TIME data type <1>:                    time.               (line    6)
* TIME data type:                        date-and-time-type-overview.
                                                             (line   62)
* time literals:                         date-and-time-literals.
                                                             (line    6)
* time representation, Event Scheduler:  events-metadata.    (line   21)
* time types:                            storage-requirements.
                                                             (line  130)
* time zone problems:                    timezone-problems.  (line    6)
* time zone tables:                      mysql-tzinfo-to-sql.
                                                             (line    6)
* time zones, and replication:           replication-features-timezone.
                                                             (line    6)
* time zones, leap seconds:              time-zone-leap-seconds.
                                                             (line    6)
* time zones, support:                   time-zone-support.  (line   11)
* time zones, upgrading:                 time-zone-upgrades. (line    6)
* TIME():                                date-and-time-functions.
                                                             (line  950)
* Time, thread command:                  thread-commands.    (line  132)
* time_format system variable:           server-system-variables.
                                                             (line 6386)
* TIME_FORMAT():                         date-and-time-functions.
                                                             (line 1038)
* TIME_TO_SEC():                         date-and-time-functions.
                                                             (line 1053)
* time_zone system variable:             server-system-variables.
                                                             (line 6390)
* TimeBetweenEpochs:                     mysql-cluster-ndbd-definition.
                                                             (line 1972)
* TimeBetweenEpochsTimeout:              mysql-cluster-ndbd-definition.
                                                             (line 1989)
* TimeBetweenGlobalCheckpoints:          mysql-cluster-ndbd-definition.
                                                             (line 1942)
* TimeBetweenInactiveTransactionAbortCheck: mysql-cluster-ndbd-definition.
                                                             (line 2067)
* TimeBetweenLocalCheckpoints:           mysql-cluster-ndbd-definition.
                                                             (line 1912)
* TimeBetweenWatchDogCheck:              mysql-cluster-ndbd-definition.
                                                             (line 1622)
* TimeBetweenWatchDogCheckInitial:       mysql-cluster-ndbd-definition.
                                                             (line 1644)
* timed_mutexes system variable:         server-system-variables.
                                                             (line 6410)
* TIMEDIFF():                            date-and-time-functions.
                                                             (line  964)
* timeout <1>:                           insert-delayed.     (line  139)
* timeout <2>:                           miscellaneous-functions.
                                                             (line   42)
* timeout:                               server-system-variables.
                                                             (line 1284)
* timeout option, ndb_waiter:            mysql-cluster-programs-ndb-waiter.
                                                             (line   88)
* timeout, connect_timeout variable <1>: mysqladmin.         (line  478)
* timeout, connect_timeout variable:     mysql-command-options.
                                                             (line  647)
* timeout, shutdown_timeout variable:    mysqladmin.         (line  483)
* timeouts (replication):                replication-features-timeout.
                                                             (line    6)
* TIMESTAMP data type <1>:               datetime.           (line    6)
* TIMESTAMP data type:                   date-and-time-type-overview.
                                                             (line   31)
* timestamp session variable:            server-system-variables.
                                                             (line 6434)
* TIMESTAMP():                           date-and-time-functions.
                                                             (line  982)
* TIMESTAMP, and logs:                   upgrading-from-previous-series.
                                                             (line  320)
* TIMESTAMP, and NULL values:            problems-with-null. (line   71)
* TIMESTAMP, and replication <1>:        replication-features-timestamp.
                                                             (line    6)
* TIMESTAMP, and replication <2>:        replication-features-auto-increment.
                                                             (line    6)
* TIMESTAMP, and replication:            upgrading-from-previous-series.
                                                             (line  320)
* TIMESTAMP, initialization and updating: timestamp-initialization.
                                                             (line    6)
* TIMESTAMPADD():                        date-and-time-functions.
                                                             (line  994)
* TIMESTAMPDIFF():                       date-and-time-functions.
                                                             (line 1015)
* timezone option, mysqld_safe:          mysqld-safe.        (line  279)
* TINYBLOB data type:                    string-type-overview.
                                                             (line  165)
* TINYINT data type:                     numeric-type-overview.
                                                             (line   40)
* TINYTEXT data type:                    string-type-overview.
                                                             (line  171)
* tips, optimization:                    miscellaneous-optimization-tips.
                                                             (line    6)
* tmp_table_size system variable:        server-system-variables.
                                                             (line 6448)
* TMPDIR environment variable <1>:       temporary-files.    (line    6)
* TMPDIR environment variable <2>:       programs-overview.  (line  276)
* TMPDIR environment variable <3>:       environment-variables.
                                                             (line   18)
* TMPDIR environment variable:           mysql-install-db-problems.
                                                             (line   84)
* tmpdir option, myisamchk:              myisamchk-repair-options.
                                                             (line  121)
* tmpdir option, myisampack:             myisampack.         (line  101)
* tmpdir option, mysql_upgrade:          mysql-upgrade.      (line  206)
* tmpdir option, mysqld:                 server-options.     (line 2279)
* tmpdir option, mysqlhotcopy:           mysqlhotcopy.       (line  194)
* tmpdir system variable:                server-system-variables.
                                                             (line 6485)
* to-last-log option, mysqlbinlog:       mysqlbinlog.        (line  517)
* TO_DAYS():                             date-and-time-functions.
                                                             (line 1062)
* TO_SECONDS():                          date-and-time-functions.
                                                             (line 1119)
* Tomcat application server:             connector-j-usagenotes-tomcat.
                                                             (line    6)
* tools, command-line <1>:               mysql.              (line   15)
* tools, command-line:                   MySQLInstallerConsole.
                                                             (line    6)
* tools, list of:                        tools-used-to-create-mysql.
                                                             (line    6)
* tools, mysqld_multi:                   mysqld-multi.       (line    6)
* tools, mysqld_safe:                    mysqld-safe.        (line    6)
* torn page <1>:                         glossary.           (line 3148)
* torn page:                             innodb-disk-io.     (line   34)
* TotalSendBufferMemory, API and SQL nodes: mysql-cluster-api-definition.
                                                             (line  245)
* TotalSendBufferMemory, data nodes:     mysql-cluster-ndbd-definition.
                                                             (line 3586)
* TotalSendBufferMemory, management nodes: mysql-cluster-mgm-definition.
                                                             (line  277)
* Touches():                             functions-that-test-spatial-relationships-between-geometries.
                                                             (line   60)
* TPS:                                   glossary.           (line 3155)
* trace DBI method:                      using-gdb-on-mysqld.
                                                             (line   89)
* trace files (MySQL Cluster):           mysql-cluster-programs-ndbd.
                                                             (line  450)
* trace files, ndbmtd:                   mysql-cluster-programs-ndbmtd.
                                                             (line   64)
* tracing, with Connector/Net:           connector-net-programming-tracing.
                                                             (line   11)
* TRADITIONAL SQL mode:                  server-sql-mode.    (line   90)
* transaction:                           glossary.           (line 3161)
* transaction ID:                        glossary.           (line 3170)
* transaction isolation level:           set-transaction.    (line    6)
* transaction isolation level, READ COMMITTED: set-transaction.
                                                             (line  115)
* transaction isolation level, READ UNCOMMITTED: set-transaction.
                                                             (line  141)
* transaction isolation level, REPEATABLE READ: set-transaction.
                                                             (line   93)
* transaction isolation level, SERIALIZABLE: set-transaction.
                                                             (line  149)
* transaction-isolation option, mysqld:  server-options.     (line 2256)
* transaction-safe tables <1>:           innodb-storage-engine.
                                                             (line   24)
* transaction-safe tables:               ansi-diff-transactions.
                                                             (line    6)
* transaction_alloc_block_size system variable: server-system-variables.
                                                             (line 6520)
* transaction_allow_batching session variable (MySQL Cluster): mysql-cluster-system-variables.
                                                             (line  807)
* transaction_prealloc_size system variable: server-system-variables.
                                                             (line 6555)
* transactional option, ndb_delete_all:  mysql-cluster-programs-ndb-delete-all.
                                                             (line   44)
* TransactionBufferMemory:               mysql-cluster-ndbd-definition.
                                                             (line  787)
* TransactionDeadlockDetectionTimeout:   mysql-cluster-ndbd-definition.
                                                             (line 2102)
* TransactionInactiveTimeout:            mysql-cluster-ndbd-definition.
                                                             (line 2084)
* transactions:                          innodb-transaction-model.
                                                             (line   18)
* transactions, and replication <1>:     replication-features-transactions.
                                                             (line    6)
* transactions, and replication:         replication-features-timeout.
                                                             (line    6)
* transactions, isolation levels:        innodb-transaction-model.
                                                             (line   18)
* transactions, metadata locking:        metadata-locking.   (line    6)
* transactions, support <1>:             innodb-storage-engine.
                                                             (line   24)
* transactions, support:                 ansi-diff-transactions.
                                                             (line    6)
* Translators, list of:                  documenters-translators.
                                                             (line    6)
* transportable tablespace:              glossary.           (line 3174)
* transporters, ndbinfo table:           mysql-cluster-ndbinfo-transporters.
                                                             (line    6)
* trigger, restrictions:                 stored-program-restrictions.
                                                             (line    6)
* triggers <1>:                          triggers.           (line   11)
* triggers <2>:                          stored-programs-views.
                                                             (line   16)
* triggers <3>:                          show-triggers.      (line    6)
* triggers <4>:                          drop-trigger.       (line    6)
* triggers:                              create-trigger.     (line    6)
* triggers option, mysqldump:            mysqldump.          (line 1079)
* triggers, and INSERT DELAYED:          insert.             (line  230)
* triggers, and replication <1>:         replication-features-triggers.
                                                             (line    6)
* triggers, and replication:             replication-features-invoked.
                                                             (line    6)
* triggers, editing with Visual Studio:  connector-net-visual-studio-editing-triggers.
                                                             (line    6)
* TRIGGERS, INFORMATION_SCHEMA table:    triggers-table.     (line    6)
* triggers, LAST_INSERT_ID():            stored-routines-last-insert-id.
                                                             (line    6)
* triggers, metadata:                    trigger-metadata.   (line    6)
* TRIM():                                string-functions.   (line  713)
* troubleshooting:                       glossary.           (line 3196)
* troubleshooting, Connector/J:          connector-j-usagenotes-troubleshooting.
                                                             (line    6)
* troubleshooting, Connector/ODBC connection problems: connector-odbc-configuration-dsn-windows-problems.
                                                             (line    6)
* troubleshooting, FreeBSD:              compilation-problems.
                                                             (line   73)
* troubleshooting, InnoDB table fragmentation: innodb-file-defragmenting.
                                                             (line    6)
* troubleshooting, JDBC:                 connector-j-installing-upgrading-issues.
                                                             (line    6)
* troubleshooting, JDBC SQLState codes:  connector-j-reference-error-sqlstates.
                                                             (line    6)
* troubleshooting, PHP:                  apis-php-problems.  (line    6)
* troubleshooting, Solaris:              compilation-problems.
                                                             (line   73)
* troubleshooting, with MySQL Enterprise Monitor: mysql-enterprise-monitor.
                                                             (line    6)
* TRUE <1>:                              boolean-literals.   (line    6)
* TRUE:                                  number-literals.    (line    6)
* TRUE, testing for:                     comparison-operators.
                                                             (line  130)
* truncate:                              glossary.           (line 3199)
* TRUNCATE TABLE <1>:                    innodb-other-changes-truncate.
                                                             (line    6)
* TRUNCATE TABLE:                        truncate-table.     (line    6)
* TRUNCATE TABLE, and MySQL Cluster:     mysql-cluster-limitations-limits.
                                                             (line    9)
* TRUNCATE TABLE, and replication:       replication-features-truncate.
                                                             (line    6)
* TRUNCATE TABLE, performance_schema database <1>: performance-schema-restrictions.
                                                             (line    6)
* TRUNCATE TABLE, performance_schema database: performance-schema-table-characteristics.
                                                             (line   10)
* TRUNCATE():                            mathematical-functions.
                                                             (line  551)
* tuning:                                optimization.       (line   21)
* tuple:                                 glossary.           (line 3215)
* tupscan option, ndb_select_all:        mysql-cluster-programs-ndb-select-all.
                                                             (line  132)
* tutorial:                              tutorial.           (line   16)
* two-phase commit:                      glossary.           (line 3222)
* TwoPassInitialNodeRestartCopy:         mysql-cluster-ndbd-definition.
                                                             (line 2881)
* tx_isolation system variable:          server-system-variables.
                                                             (line 6598)
* type codes, C prepared statement API:  c-api-prepared-statement-type-codes.
                                                             (line    6)
* type conversions <1>:                  comparison-operators.
                                                             (line   38)
* type conversions:                      type-conversion.    (line    6)
* type option, mysql_convert_table_format: mysql-convert-table-format.
                                                             (line   54)
* type option, MySQLInstallerConsole:    MySQLInstallerConsole.
                                                             (line   46)
* type option, ndb_config:               mysql-cluster-programs-ndb-config.
                                                             (line  306)
* type option, ndb_show_tables:          mysql-cluster-programs-ndb-show-tables.
                                                             (line   68)
* Types namespace:                       connector-net-ref-types.
                                                             (line   12)
* types, columns <1>:                    choosing-types.     (line    6)
* types, columns:                        data-types.         (line   30)
* types, data:                           data-types.         (line   30)
* types, date:                           storage-requirements.
                                                             (line  130)
* types, Date and Time:                  date-and-time-types.
                                                             (line   17)
* types, numeric:                        storage-requirements.
                                                             (line   83)
* types, of tables:                      storage-engines.    (line   22)
* types, portability:                    other-vendor-data-types.
                                                             (line    6)
* types, string:                         storage-requirements.
                                                             (line  145)
* types, strings:                        string-types.       (line   14)
* types, time:                           storage-requirements.
                                                             (line  130)
* typographical conventions:             manual-conventions. (line    8)
* TZ environment variable <1>:           timezone-problems.  (line    6)
* TZ environment variable:               environment-variables.
                                                             (line   18)
* tz-utc option, mysqldump:              mysqldump.          (line 1084)
* UCASE():                               string-functions.   (line  732)
* UCS-2:                                 charset.            (line   23)
* ucs2 character set:                    charset-unicode-ucs2.
                                                             (line    6)
* UDFs <1>:                              drop-function-udf.  (line    6)
* UDFs:                                  create-function-udf.
                                                             (line    6)
* UDFs, compiling:                       udf-compiling.      (line    6)
* UDFs, defined:                         adding-functions.   (line   12)
* UDFs, return values:                   udf-return-values.  (line    6)
* ulimit:                                not-enough-file-handles.
                                                             (line   33)
* UMASK environment variable <1>:        file-permissions.   (line    6)
* UMASK environment variable:            environment-variables.
                                                             (line   18)
* UMASK_DIR environment variable <1>:    file-permissions.   (line   20)
* UMASK_DIR environment variable:        environment-variables.
                                                             (line   18)
* unary minus (-):                       arithmetic-functions.
                                                             (line   69)
* unbuffered option, mysql:              mysql-command-options.
                                                             (line  574)
* UNCOMPRESS():                          encryption-functions.
                                                             (line  467)
* UNCOMPRESSED_LENGTH():                 encryption-functions.
                                                             (line  480)
* undo:                                  glossary.           (line 3229)
* undo log:                              glossary.           (line 3235)
* undo tablespace:                       glossary.           (line 3254)
* UndoDataBuffer:                        mysql-cluster-ndbd-definition.
                                                             (line 2333)
* UndoIndexBuffer:                       mysql-cluster-ndbd-definition.
                                                             (line 2290)
* UNHEX():                               string-functions.   (line  736)
* Unicode:                               charset.            (line   23)
* Unicode Collation Algorithm:           charset-unicode-sets.
                                                             (line   86)
* Unicode, with Connector/J:             connector-j-reference-charsets.
                                                             (line    6)
* UNINSTALL PLUGIN:                      uninstall-plugin.   (line    6)
* uninstalling plugins <1>:              uninstall-plugin.   (line    6)
* uninstalling plugins:                  server-plugin-loading.
                                                             (line    6)
* UNION <1>:                             union.              (line    6)
* UNION:                                 searching-on-two-keys.
                                                             (line    6)
* Union():                               spatial-operators.  (line   36)
* UNIQUE:                                alter-table.        (line  375)
* unique constraint:                     glossary.           (line 3262)
* unique ID:                             getting-unique-id.  (line    6)
* unique index:                          glossary.           (line 3269)
* unique key:                            glossary.           (line 3282)
* unique key, constraint:                constraint-primary-key.
                                                             (line    6)
* unique keys, and partitioning keys:    partitioning-limitations-partitioning-keys-unique-keys.
                                                             (line    6)
* unique_checks session variable:        server-system-variables.
                                                             (line 6634)
* unique_subquery join type, optimizer:  explain-output.     (line  325)
* Unix <1>:                              connector-net.      (line   20)
* Unix:                                  connector-odbc.     (line   17)
* Unix, compiling clients on:            c-api-building-clients.
                                                             (line   11)
* UNIX_TIMESTAMP():                      date-and-time-functions.
                                                             (line 1179)
* UNKNOWN, testing for:                  comparison-operators.
                                                             (line  130)
* unloading, tables:                     retrieving-data.    (line   18)
* UNLOCK TABLES:                         lock-tables.        (line   12)
* unnamed views:                         from-clause-subqueries.
                                                             (line    6)
* unpack option, myisamchk:              myisamchk-repair-options.
                                                             (line  131)
* unqualified option, ndb_desc:          mysql-cluster-programs-ndb-desc.
                                                             (line  318)
* unqualified option, ndb_show_tables:   mysql-cluster-programs-ndb-show-tables.
                                                             (line   82)
* unsafe statement (replication), defined: replication-rbr-safe-unsafe.
                                                             (line    6)
* unsafe statements (replication):       replication-rbr-safe-unsafe.
                                                             (line   58)
* UNSIGNED <1>:                          numeric-types.      (line   15)
* UNSIGNED:                              numeric-type-overview.
                                                             (line    6)
* UNTIL:                                 repeat.             (line    6)
* updatable views:                       view-updatability.  (line    6)
* updatable_views_with_limit system variable: server-system-variables.
                                                             (line 6659)
* UPDATE <1>:                            update.             (line    6)
* UPDATE:                                ansi-diff-update.   (line    6)
* update option (ndb_index_stat):        mysql-cluster-programs-ndb-index-stat.
                                                             (line  151)
* update, thread state:                  general-thread-states.
                                                             (line  341)
* update-state option, myisamchk:        myisamchk-check-options.
                                                             (line   62)
* updates option, MySQLInstallerConsole: MySQLInstallerConsole.
                                                             (line   30)
* UpdateXML():                           xml-functions.      (line  275)
* updating main table, thread state:     general-thread-states.
                                                             (line  349)
* updating reference tables, thread state: general-thread-states.
                                                             (line  355)
* updating, releases of MySQL:           many-versions.      (line    6)
* Updating, thread state:                general-thread-states.
                                                             (line  345)
* upgrade-system-tables option, mysql_upgrade: mysql-upgrade.
                                                             (line  210)
* upgrades and downgrades (MySQL Cluster), compatibility between versions: mysql-cluster-upgrade-downgrade.
                                                             (line    6)
* upgrades, MySQL Cluster <1>:           mysql-cluster-rolling-restart.
                                                             (line    6)
* upgrades, MySQL Cluster:               mysql-cluster-upgrade-downgrade.
                                                             (line    6)
* upgrading <1>:                         upgrading.          (line   11)
* upgrading:                             upgrading-downgrading.
                                                             (line   14)
* upgrading lock, thread state:          delayed-insert-thread-states.
                                                             (line   81)
* upgrading MySQL:                       mysql-upgrade.      (line    6)
* upgrading, different architecture:     copying-databases.  (line    6)
* upgrading, to &current-series; <1>:    upgrading-from-5-4. (line    6)
* upgrading, to &current-series;:        upgrading-from-previous-series.
                                                             (line    6)
* UPPER():                               string-functions.   (line  779)
* uptime:                                mysqladmin.         (line  173)
* URLs for downloading MySQL:            getting-mysql.      (line    6)
* usage option (MySQL Cluster programs): mysql-cluster-program-options-common.
                                                             (line   82)
* usage option, ndb_config:              mysql-cluster-programs-ndb-config.
                                                             (line   90)
* USE:                                   use.                (line    6)
* use command, mysql:                    mysql-commands.     (line  230)
* USE INDEX:                             index-hints.        (line    6)
* USE KEY:                               index-hints.        (line    6)
* use-frm option, mysqlcheck:            mysqlcheck.         (line  405)
* use-mysqld_safe option, mysql.server:  mysql-server.       (line   57)
* use-threads option, mysqlimport:       mysqlimport.        (line  308)
* useConfigs connection properties:      connector-j-useconfigs.
                                                             (line    6)
* useHexFormat option, ndb_select_all:   mysql-cluster-programs-ndb-select-all.
                                                             (line  102)
* user accounts, creating:               create-user.        (line    6)
* user accounts, renaming:               rename-user.        (line    6)
* user accounts, resource limits <1>:    grant.              (line  490)
* user accounts, resource limits <2>:    user-resources.     (line    6)
* user accounts, resource limits:        server-system-variables.
                                                             (line 3541)
* USER environment variable <1>:         connecting.         (line  238)
* USER environment variable:             environment-variables.
                                                             (line   18)
* User lock, thread state:               general-thread-states.
                                                             (line  360)
* user names, and passwords:             user-names.         (line    6)
* user names, in account names:          account-names.      (line    6)
* user names, in default accounts:       default-privileges. (line    6)
* user option:                           connecting.         (line  217)
* user option, mysql:                    mysql-command-options.
                                                             (line  578)
* user option, mysql.server:             mysql-server.       (line   62)
* user option, mysql_convert_table_format: mysql-convert-table-format.
                                                             (line   59)
* user option, mysql_install_db:         mysql-install-db.   (line   85)
* user option, mysql_setpermission:      mysql-setpermission.
                                                             (line   55)
* user option, mysql_upgrade:            mysql-upgrade.      (line  214)
* user option, mysqlaccess:              mysqlaccess.        (line  156)
* user option, mysqladmin:               mysqladmin.         (line  451)
* user option, mysqlbinlog:              mysqlbinlog.        (line  525)
* user option, mysqlcheck:               mysqlcheck.         (line  411)
* user option, mysqld:                   server-options.     (line 2312)
* user option, mysqld_multi:             mysqld-multi.       (line  148)
* user option, mysqld_safe:              mysqld-safe.        (line  285)
* user option, mysqldump:                mysqldump.          (line 1097)
* user option, mysqlhotcopy:             mysqlhotcopy.       (line  198)
* user option, mysqlimport:              mysqlimport.        (line  304)
* user option, MySQLInstallerConsole:    MySQLInstallerConsole.
                                                             (line   85)
* user option, mysqlshow:                mysqlshow.          (line  234)
* user option, mysqlslap:                mysqlslap.          (line  457)
* user privileges, adding:               adding-users.       (line    6)
* user privileges, deleting <1>:         drop-user.          (line    6)
* user privileges, deleting:             removing-users.     (line    6)
* user privileges, dropping <1>:         drop-user.          (line    6)
* user privileges, dropping:             removing-users.     (line    6)
* User sleep, thread state:              general-thread-states.
                                                             (line  367)
* user table, sorting:                   connection-access.  (line  130)
* user variables:                        user-variables.     (line    6)
* user variables, and replication:       replication-features-variables.
                                                             (line    6)
* USER():                                information-functions.
                                                             (line  573)
* User-defined functions <1>:            drop-function-udf.  (line    6)
* User-defined functions:                create-function-udf.
                                                             (line    6)
* user-defined functions, adding <1>:    adding-udf.         (line   15)
* user-defined functions, adding:        adding-functions.   (line   12)
* user-defined functions, editing with Visual Studio: connector-net-visual-studio-editing-user-defined-functions-udf.
                                                             (line    6)
* USER_PRIVILEGES, INFORMATION_SCHEMA table: user-privileges-table.
                                                             (line    6)
* users, adding:                         unix-postinstallation.
                                                             (line  356)
* users, deleting <1>:                   drop-user.          (line    6)
* users, deleting:                       removing-users.     (line    6)
* users, root:                           default-privileges. (line    6)
* using multiple disks to start data:    windows-symbolic-links.
                                                             (line    6)
* using MySQL Cluster programs:          mysql-cluster-programs.
                                                             (line   34)
* UTC_DATE():                            date-and-time-functions.
                                                             (line 1237)
* UTC_TIME():                            date-and-time-functions.
                                                             (line 1246)
* UTC_TIMESTAMP():                       date-and-time-functions.
                                                             (line 1255)
* UTF-8:                                 charset.            (line   23)
* utf16 character set:                   charset-unicode-utf16.
                                                             (line    6)
* utf16_bin collation:                   charset-unicode-sets.
                                                             (line  223)
* utf32 character set:                   charset-unicode-utf32.
                                                             (line    6)
* utf8 character set:                    charset-unicode-utf8.
                                                             (line    6)
* utf8mb3 character set:                 charset-unicode-utf8mb3.
                                                             (line    6)
* utf8mb4 character set:                 charset-unicode-utf8mb4.
                                                             (line    6)
* utilities, program-development:        programs-overview.  (line  228)
* utility programs:                      programs-overview.  (line  147)
* UUID():                                miscellaneous-functions.
                                                             (line  230)
* UUID_SHORT():                          miscellaneous-functions.
                                                             (line  279)
* valid numbers, examples:               number-literals.    (line    6)
* VALUES():                              miscellaneous-functions.
                                                             (line  312)
* VAR_POP():                             group-by-functions. (line  271)
* VAR_SAMP():                            group-by-functions. (line  280)
* VARBINARY data type <1>:               binary-varbinary.   (line    6)
* VARBINARY data type:                   string-type-overview.
                                                             (line  158)
* VARCHAR data type <1>:                 string-types.       (line   14)
* VARCHAR data type:                     string-type-overview.
                                                             (line  121)
* VARCHAR, size:                         storage-requirements.
                                                             (line  190)
* VARCHARACTER data type:                string-type-overview.
                                                             (line  121)
* variables, and replication:            replication-features-variables.
                                                             (line    6)
* variables, environment:                programs-overview.  (line  273)
* variables, mysqld:                     server-parameters.  (line   11)
* variables, server:                     show-variables.     (line    6)
* variables, status <1>:                 show-status.        (line    6)
* variables, status:                     server-status-variables.
                                                             (line    6)
* variables, system <1>:                 show-variables.     (line    6)
* variables, system <2>:                 using-system-variables.
                                                             (line   11)
* variables, system:                     server-system-variables.
                                                             (line    6)
* variables, user:                       user-variables.     (line    6)
* VARIANCE():                            group-by-functions. (line  287)
* verbose option (ndb_index_stat):       mysql-cluster-programs-ndb-index-stat.
                                                             (line  305)
* verbose option (ndb_restore):          mysql-cluster-programs-ndb-restore.
                                                             (line  607)
* verbose option, my_print_defaults:     my-print-defaults.  (line   57)
* verbose option, myisam_ftdump:         myisam-ftdump.      (line   79)
* verbose option, myisamchk:             myisamchk-general-options.
                                                             (line   32)
* verbose option, myisampack:            myisampack.         (line  106)
* verbose option, mysql:                 mysql-command-options.
                                                             (line  582)
* verbose option, mysql_convert_table_format: mysql-convert-table-format.
                                                             (line   63)
* verbose option, mysql_install_db:      mysql-install-db.   (line   94)
* verbose option, mysql_plugin:          mysql-plugin.       (line  149)
* verbose option, mysql_upgrade:         mysql-upgrade.      (line  219)
* verbose option, mysql_waitpid:         mysql-waitpid.      (line   31)
* verbose option, mysqladmin:            mysqladmin.         (line  455)
* verbose option, mysqlbinlog:           mysqlbinlog.        (line  529)
* verbose option, mysqlcheck:            mysqlcheck.         (line  415)
* verbose option, mysqld:                server-options.     (line 2347)
* verbose option, mysqld_multi:          mysqld-multi.       (line  153)
* verbose option, mysqldump:             mysqldump.          (line 1101)
* verbose option, mysqldumpslow:         mysqldumpslow.      (line  103)
* verbose option, mysqlimport:           mysqlimport.        (line  312)
* verbose option, mysqlshow:             mysqlshow.          (line  238)
* verbose option, mysqlslap:             mysqlslap.          (line  461)
* verbose option, ndb_blob_tool:         mysql-cluster-programs-ndb-blob-tool.
                                                             (line  119)
* verbose option, perror:                perror.             (line   52)
* VERSION file, CMake:                   source-configuration-third-party.
                                                             (line    6)
* version option (MySQL Cluster programs): mysql-cluster-program-options-common.
                                                             (line  216)
* version option, comp_err:              comp-err.           (line   70)
* version option, my_print_defaults:     my-print-defaults.  (line   61)
* version option, myisamchk:             myisamchk-general-options.
                                                             (line   38)
* version option, myisampack:            myisampack.         (line  111)
* version option, mysql:                 mysql-command-options.
                                                             (line  589)
* version option, mysql_config:          mysql-config.       (line   56)
* version option, mysql_convert_table_format: mysql-convert-table-format.
                                                             (line   67)
* version option, mysql_plugin:          mysql-plugin.       (line  155)
* version option, mysql_waitpid:         mysql-waitpid.      (line   36)
* version option, mysqlaccess:           mysqlaccess.        (line  160)
* version option, mysqladmin:            mysqladmin.         (line  459)
* version option, mysqlbinlog:           mysqlbinlog.        (line  539)
* version option, mysqlcheck:            mysqlcheck.         (line  420)
* version option, mysqld:                server-options.     (line 2351)
* version option, mysqld_multi:          mysqld-multi.       (line  157)
* version option, mysqldump:             mysqldump.          (line 1105)
* version option, mysqlimport:           mysqlimport.        (line  316)
* version option, mysqlshow:             mysqlshow.          (line  244)
* version option, mysqlslap:             mysqlslap.          (line  467)
* version option, ndb_config:            mysql-cluster-programs-ndb-config.
                                                             (line  123)
* version option, perror:                perror.             (line   57)
* version option, resolve_stack_dump:    resolve-stack-dump. (line   33)
* version option, resolveip:             resolveip.          (line   23)
* version system variable:               server-system-variables.
                                                             (line 6691)
* VERSION():                             information-functions.
                                                             (line  590)
* version, choosing:                     which-version.      (line   18)
* version, latest:                       getting-mysql.      (line    6)
* version-check option, mysql_upgrade:   mysql-upgrade.      (line  223)
* version_comment system variable:       server-system-variables.
                                                             (line 6699)
* version_compile_machine system variable: server-system-variables.
                                                             (line 6716)
* version_compile_os system variable:    server-system-variables.
                                                             (line 6730)
* vertical option, mysql:                mysql-command-options.
                                                             (line  593)
* vertical option, mysqladmin:           mysqladmin.         (line  463)
* victim:                                glossary.           (line 3289)
* Vietnamese:                            faqs-cjk.           (line    6)
* view, restrictions:                    view-restrictions.  (line    6)
* views <1>:                             views.              (line   13)
* views <2>:                             stored-programs-views.
                                                             (line   16)
* views:                                 create-view.        (line    6)
* views, algorithms:                     view-algorithms.    (line    6)
* views, and replication:                replication-features-views.
                                                             (line    6)
* VIEWS, INFORMATION_SCHEMA table:       views-table.        (line    6)
* Views, limitations:                    view-restrictions.  (line   82)
* views, metadata:                       view-metadata.      (line    6)
* Views, privileges:                     view-restrictions.  (line   82)
* Views, problems:                       view-restrictions.  (line   82)
* views, updatable <1>:                  view-updatability.  (line    6)
* views, updatable:                      create-view.        (line    6)
* Vision:                                connector-odbc-usagenotes-apptips-vision.
                                                             (line    6)
* Visual Objects:                        connector-odbc-usagenotes-apptips-microsoft-visualobjects.
                                                             (line    6)
* Visual Studio <1>:                     connector-net-visual-studio.
                                                             (line   23)
* Visual Studio:                         connector-net.      (line   20)
* wait:                                  glossary.           (line 3295)
* WAIT COMPLETED (START BACKUP command): mysql-cluster-backup-using-management-client.
                                                             (line   48)
* wait option, myisamchk:                myisamchk-general-options.
                                                             (line   42)
* wait option, myisampack:               myisampack.         (line  115)
* wait option, mysql:                    mysql-command-options.
                                                             (line  599)
* wait option, mysqladmin:               mysqladmin.         (line  468)
* WAIT STARTED (START BACKUP command):   mysql-cluster-backup-using-management-client.
                                                             (line   40)
* wait-nodes option, ndb_waiter:         mysql-cluster-programs-ndb-waiter.
                                                             (line  110)
* wait_timeout system variable:          server-system-variables.
                                                             (line 6744)
* Waiting for all running commits to finish, thread state: general-thread-states.
                                                             (line  371)
* Waiting for commit lock, thread state: general-thread-states.
                                                             (line  377)
* waiting for delay_list, thread state:  delayed-insert-thread-states.
                                                             (line   44)
* Waiting for event from ndbcluster, thread state: mysql-cluster-thread-states.
                                                             (line   25)
* Waiting for event metadata lock, thread state: general-thread-states.
                                                             (line  414)
* Waiting for event read lock, thread state: general-thread-states.
                                                             (line  414)
* Waiting for first event from ndbcluster, thread state: mysql-cluster-thread-states.
                                                             (line   30)
* Waiting for global metadata lock, thread state: general-thread-states.
                                                             (line  414)
* Waiting for global read lock, thread state: general-thread-states.
                                                             (line  384)
* waiting for handler insert, thread state: delayed-insert-thread-states.
                                                             (line   51)
* waiting for handler lock, thread state: delayed-insert-thread-states.
                                                             (line   56)
* waiting for handler open, thread state: delayed-insert-thread-states.
                                                             (line   62)
* Waiting for INSERT, thread state:      delayed-insert-thread-states.
                                                             (line   86)
* Waiting for master to send event, thread state: slave-io-thread-states.
                                                             (line   49)
* Waiting for master update, thread state: slave-io-thread-states.
                                                             (line   12)
* Waiting for ndbcluster binlog update to reach current position, thread state: mysql-cluster-thread-states.
                                                             (line   32)
* Waiting for ndbcluster to start, thread state: mysql-cluster-thread-states.
                                                             (line   34)
* Waiting for next activation, thread state: event-scheduler-thread-states.
                                                             (line   20)
* Waiting for query cache lock, thread state: query-cache-thread-states.
                                                             (line   33)
* Waiting for release of readlock, thread state: general-thread-states.
                                                             (line  389)
* Waiting for scheduler to stop, thread state: event-scheduler-thread-states.
                                                             (line   25)
* Waiting for schema epoch, thread state: mysql-cluster-thread-states.
                                                             (line   36)
* Waiting for schema metadata lock, thread state: general-thread-states.
                                                             (line  414)
* Waiting for slave mutex on exit, thread state <1>: slave-sql-thread-states.
                                                             (line   31)
* Waiting for slave mutex on exit, thread state: slave-io-thread-states.
                                                             (line   83)
* Waiting for stored function metadata lock, thread state: general-thread-states.
                                                             (line  414)
* Waiting for stored procedure metadata lock, thread state: general-thread-states.
                                                             (line  414)
* Waiting for table level lock, thread state: general-thread-states.
                                                             (line  414)
* Waiting for table metadata lock, thread state: general-thread-states.
                                                             (line  414)
* Waiting for table, thread state:       general-thread-states.
                                                             (line  396)
* Waiting for tables, thread state:      general-thread-states.
                                                             (line  396)
* Waiting for the next event in relay log, thread state: slave-sql-thread-states.
                                                             (line    9)
* Waiting for the slave SQL thread to free enough relay log space, thread state: slave-io-thread-states.
                                                             (line   75)
* Waiting for trigger metadata lock, thread state: general-thread-states.
                                                             (line  414)
* Waiting on cond, thread state:         general-thread-states.
                                                             (line  438)
* Waiting on empty queue, thread state:  event-scheduler-thread-states.
                                                             (line   30)
* Waiting to finalize termination, thread state: master-thread-states.
                                                             (line   30)
* Waiting to get readlock, thread state: general-thread-states.
                                                             (line  443)
* Waiting to reconnect after a failed binlog dump request, thread state: slave-io-thread-states.
                                                             (line   37)
* Waiting to reconnect after a failed master event read, thread state: slave-io-thread-states.
                                                             (line   62)
* warm backup:                           glossary.           (line 3307)
* warm up:                               glossary.           (line 3312)
* warning_count session variable:        server-system-variables.
                                                             (line 6779)
* warnings command, mysql:               mysql-commands.     (line  234)
* Website Configuration Tool:            connector-net-website-config.
                                                             (line    6)
* WEEK():                                date-and-time-functions.
                                                             (line 1264)
* WEEKDAY():                             date-and-time-functions.
                                                             (line 1327)
* WEEKOFYEAR():                          date-and-time-functions.
                                                             (line 1337)
* Well-Known Binary format:              gis-wkb-format.     (line    6)
* Well-Known Text format:                gis-wkt-format.     (line    6)
* WHERE:                                 where-optimizations.
                                                             (line    6)
* where option, mysqldump:               mysqldump.          (line 1109)
* WHERE, with SHOW <1>:                  extended-show.      (line    6)
* WHERE, with SHOW:                      information-schema. (line   40)
* WHILE:                                 while.              (line    6)
* WHILE, labels:                         statement-labels.   (line    6)
* widths, display:                       data-types.         (line   32)
* Wildcard character (%):                string-literals.    (line   77)
* Wildcard character (_):                string-literals.    (line   78)
* wildcards, and LIKE:                   index-btree-hash.   (line   13)
* wildcards, in account names:           account-names.      (line   73)
* wildcards, in mysql.columns_priv table: request-access.    (line   59)
* wildcards, in mysql.db table:          request-access.     (line   26)
* wildcards, in mysql.host table:        request-access.     (line   26)
* wildcards, in mysql.procs_priv table:  request-access.     (line   59)
* wildcards, in mysql.tables_priv table: request-access.     (line   59)
* Windows <1>:                           glossary.           (line 3329)
* Windows <2>:                           connector-net.      (line   20)
* Windows:                               connector-odbc.     (line   17)
* Windows Failover Clustering:           ha-wfc.             (line    6)
* windows option, mysql_install_db:      mysql-install-db.   (line   98)
* Windows Server Failover Clustering:    ha-wfc.             (line    6)
* Windows, compiling clients on:         c-api-building-clients.
                                                             (line   48)
* Windows, MySQL limitations <1>:        limits-windows.     (line    6)
* Windows, MySQL limitations:            limits-frm-file.    (line    6)
* Windows, path name separators:         option-files.       (line  192)
* Windows, pluggable authentication:     windows-authentication-plugin.
                                                             (line   11)
* Windows, upgrading:                    windows-upgrading.  (line    6)
* WITH_BUNDLED_LIBEVENT option, CMake:   source-configuration-options.
                                                             (line  624)
* WITH_BUNDLED_MEMCACHED option, CMake:  source-configuration-options.
                                                             (line  631)
* WITH_CLASSPATH option, CMake:          source-configuration-options.
                                                             (line  642)
* WITH_DEBUG option, CMake:              source-configuration-options.
                                                             (line  509)
* WITH_EMBEDDED_SERVER option, CMake:    source-configuration-options.
                                                             (line  519)
* WITH_ERROR_INSERT option, CMake:       source-configuration-options.
                                                             (line  648)
* WITH_EXTRA_CHARSETS option, CMake:     source-configuration-options.
                                                             (line  523)
* WITH_LIBEDIT option, CMake:            source-configuration-options.
                                                             (line  533)
* WITH_LIBWRAP option, CMake:            source-configuration-options.
                                                             (line  537)
* WITH_NDB_BINLOG option, CMake:         source-configuration-options.
                                                             (line  669)
* WITH_NDB_DEBUG option, CMake:          source-configuration-options.
                                                             (line  674)
* WITH_NDB_JAVA option, CMake:           source-configuration-options.
                                                             (line  679)
* WITH_NDB_PORT option, CMake:           source-configuration-options.
                                                             (line  690)
* WITH_NDB_TEST option, CMake:           source-configuration-options.
                                                             (line  697)
* WITH_NDBCLUSTER option, CMake:         source-configuration-options.
                                                             (line  660)
* WITH_NDBCLUSTER_STORAGE_ENGINE option, CMake: source-configuration-options.
                                                             (line  654)
* WITH_NDBMTD option, CMake:             source-configuration-options.
                                                             (line  664)
* WITH_READLINE option, CMake:           source-configuration-options.
                                                             (line  541)
* WITH_SSL option, CMake:                source-configuration-options.
                                                             (line  546)
* WITH_UNIXODBC option, CMake:           source-configuration-options.
                                                             (line  342)
* WITH_ZLIB option, CMake:               source-configuration-options.
                                                             (line  562)
* Within():                              functions-that-test-spatial-relationships-between-geometries.
                                                             (line   67)
* WITHOUT_SERVER option, CMake:          source-configuration-options.
                                                             (line  574)
* WKB format:                            gis-wkb-format.     (line    6)
* WKT format:                            gis-wkt-format.     (line    6)
* workload:                              glossary.           (line 3335)
* wrappers, Eiffel:                      apis-eiffel.        (line    6)
* write access, tmp:                     mysql-install-db-problems.
                                                             (line   70)
* write combining:                       glossary.           (line 3341)
* write-binlog option, mysql_upgrade:    mysql-upgrade.      (line  232)
* write-binlog option, mysqlcheck:       mysqlcheck.         (line  424)
* write_buffer_size myisamchk variable:  myisamchk-general-options.
                                                             (line   53)
* Writing to net, thread state:          general-thread-states.
                                                             (line  450)
* X():                                   point-property-functions.
                                                             (line    9)
* X509/Certificate:                      ssl-basics.         (line   30)
* XA:                                    glossary.           (line 3349)
* XA BEGIN:                              xa-statements.      (line    6)
* XA COMMIT:                             xa-statements.      (line    6)
* XA PREPARE:                            xa-statements.      (line    6)
* XA RECOVER:                            xa-statements.      (line    6)
* XA ROLLBACK:                           xa-statements.      (line    6)
* XA START:                              xa-statements.      (line    6)
* XA transactions:                       xa.                 (line   11)
* XA transactions, restrictions:         xa-restrictions.    (line    6)
* XA transactions, transaction identifiers: xa-statements.   (line    6)
* xid, XA transaction identifier:        xa-statements.      (line    6)
* xml option, mysql:                     mysql-command-options.
                                                             (line  604)
* xml option, mysqldump:                 mysqldump.          (line 1121)
* xml option, ndb_config:                mysql-cluster-programs-ndb-config.
                                                             (line  420)
* XOR, bitwise:                          bit-functions.      (line   38)
* XOR, logical:                          logical-operators.  (line   84)
* Y():                                   point-property-functions.
                                                             (line   21)
* yaSSL:                                 configuring-for-ssl.
                                                             (line    6)
* YEAR data type <1>:                    year.               (line    6)
* YEAR data type:                        date-and-time-type-overview.
                                                             (line   69)
* YEAR():                                date-and-time-functions.
                                                             (line 1346)
* YEARWEEK():                            date-and-time-functions.
                                                             (line 1354)
* Yen sign (Japanese):                   faqs-cjk.           (line    6)
* young:                                 glossary.           (line 3360)
* ZEROFILL <1>:                          c-api-prepared-statement-problems.
                                                             (line   13)
* ZEROFILL <2>:                          numeric-types.      (line   15)
* ZEROFILL:                              numeric-type-overview.
                                                             (line    6)
* ZFS:                                   ha-zfs-replication. (line   12)
* | (bitwise OR):                        bit-functions.      (line   20)
* || (logical OR):                       logical-operators.  (line   65)
* ~ (invert bits):                       bit-functions.      (line   75)



Tag Table:
Node: Top167
Node: preface2043
Ref: legalnotice3088
Node: introduction8611
Node: manual-info11840
Node: manual-conventions14174
Node: what-is19304
Node: what-is-mysql19685
Node: features25109
Node: history34842
Node: mysql-nutshell35978
Node: smp-improvements51869
Node: innodb-io-changes52888
Node: monitoring-improvements55830
Node: solaris-enhancements57756
Node: development-history59254
Node: information-sources61023
Node: mailing-lists61632
Node: mailing-list-use66623
Node: forums67728
Node: irc68275
Node: mysql-enterprise-information69235
Node: bug-reports70025
Node: compatibility87982
Node: standards90678
Node: sql-mode90991
Node: ansi-mode91983
Node: extensions-to-ansi93180
Node: differences-from-ansi102974
Node: ansi-diff-select-into-table104166
Node: ansi-diff-update105096
Node: ansi-diff-transactions105709
Node: ansi-diff-foreign-keys112998
Node: ansi-diff-comments117800
Node: constraints120469
Node: constraint-primary-key122494
Node: constraint-foreign-key123863
Ref: constraint-foreign-key-deviations126639
Node: constraint-invalid-data128960
Node: constraint-enum134781
Node: credits137397
Node: contributors137929
Node: documenters-translators146739
Node: packages149156
Node: tools-used-to-create-mysql150357
Node: supporters151387
Node: installing152325
Node: general-installation-issues158065
Node: supported-os159148
Node: which-version162573
Node: choosing-version163323
Node: choosing-distribution-format169448
Node: many-versions172673
Node: getting-mysql174565
Node: verifying-package-integrity175210
Node: verifying-md5-checksum176371
Node: checking-gpg-signature178531
Node: checking-gpg-signature-windows185990
Ref: gnupg-kleopatra-home186678
Ref: gnupg-kleopatra-find-certificate186924
Ref: gnupg-kleopatra-change-trust187674
Ref: gnupg-kleopatra-decrypt-load188660
Ref: gnupg-kleopatra-decrypt-okay-sig188957
Ref: gnupg-kleopatra-decrypt-invalid-sig189130
Node: checking-rpm-signature189294
Node: installation-layouts190796
Node: compiler-characteristics191678
Node: binary-installation192233
Ref: binary-installation-layout194926
Ref: binary-installation-createsysuser197261
Ref: binary-installation-unpack198163
Ref: binary-installation-postinstall199582
Node: windows-installation200023
Node: windows-installation-layout207040
Node: windows-choosing-package209856
Node: mysql-installer212858
Node: mysql-installer-gui217280
Ref: mysql-installer-welcome217955
Ref: mysql-installer-license-agreement218390
Ref: mysql-installer-find-latest-products-win218703
Ref: mysql-installer-choose-setup-type218761
Ref: mysql-installer-choose-setup-page-win219007
Ref: mysql-installer-check-requirements-win219493
Ref: mysql-installer-installation-progress-win219627
Ref: mysql-installer-installation-progress-status-win219792
Ref: mysql-installer-initial-configuration-overview220059
Ref: mysql-installer-mysql-server-configuration-choice220650
Ref: mysql-installer-configuration-setup-win221061
Ref: mysql-installer-installation-configuration-win-service-details221435
Ref: mysql-installer-installation-configuration-log-options222215
Ref: mysql-installer-installation-complete-win222486
Ref: mysql-installer-maintenance-win222750
Ref: mysql-installer-maintenance-feature-selection-win223109
Node: MySQLInstallerConsole223391
Ref: MySQLInstallerConsole-help224465
Ref: MySQLInstallerConsole-updates224607
Ref: MySQLInstallerConsole-nowait224728
Ref: MySQLInstallerConsole-catalog224922
Ref: MySQLInstallerConsole-type225052
Ref: MySQLInstallerConsole-action225235
Ref: MySQLInstallerConsole-product225821
Ref: MySQLInstallerConsole-config226058
Ref: MySQLInstallerConsole-user226233
Node: windows-notifier226548
Ref: windows-notifier-server-instance230283
Ref: windows-notifier-actions230844
Ref: windows-notifier-options232272
Ref: windows-notifier-manage-services232493
Ref: windows-notifier-manage-instances232603
Ref: windows-notifier-add-services233061
Ref: windows-notifier-add-instances233153
Node: windows-notifier-installation233320
Ref: windows-notifier-installation-wmi234783
Ref: windows-notifier-installation-errors244880
Node: windows-using-installer246152
Ref: installer-windows-workflow-installer247609
Node: windows-install-wizard249781
Node: mysql-install-wizard-starting252515
Node: mysql-install-wizard-install-type254234
Node: mysql-install-wizard-custom-install255708
Node: mysql-install-wizard-confirmation-dialog256715
Node: mysql-install-wizard-changes257648
Node: mysql-install-wizard-upgrading261124
Node: windows-installer-msi-quiet261958
Node: windows-installer-uninstalling264116
Node: mysql-config-wizard266161
Node: mysql-config-wizard-starting267836
Node: mysql-config-wizard-maintenance271055
Node: mysql-config-wizard-configuration-type272396
Node: mysql-config-wizard-server-type274169
Node: mysql-config-wizard-database-usage275853
Node: mysql-config-wizard-tablespace278046
Node: mysql-config-wizard-connections279143
Node: mysql-config-wizard-networking280592
Node: mysql-config-wizard-character-set281878
Node: mysql-config-wizard-service283083
Node: mysql-config-wizard-security285152
Node: mysql-config-wizard-confirmation287140
Node: mysql-config-wizard-cmdline288954
Node: windows-install-archive296397
Node: windows-extract-archive297675
Node: windows-create-option-file298860
Node: windows-select-server302466
Node: windows-server-first-start304014
Node: windows-start-command-line307685
Node: mysql-installation-windows-path309969
Node: windows-start-service312077
Node: windows-testing321022
Node: windows-troubleshooting322548
Node: windows-upgrading327953
Node: windows-postinstallation331315
Node: macosx-installation335828
Node: macosx-installation-notes338436
Node: macosx-installation-pkg343095
Ref: mysql-installation-layout-macosx344677
Node: macosx-installation-startupitem347660
Node: macosx-installation-prefpane350159
Node: macosx-installation-server353277
Node: linux-installation355802
Node: linux-installation-rpm358175
Ref: mysql-installation-layout-linuxrpm359059
Node: linux-installation-debian370565
Node: linux-installation-native372088
Node: uln-installation384423
Node: solaris-installation385993
Node: solaris-installation-pkg389349
Node: solaris-installation-opensolaris392210
Node: hpux-installation395339
Node: hpux-installation-general396330
Node: hpux-installation-depot397370
Node: freebsd-installation399343
Node: source-installation401284
Node: source-installation-layout408647
Node: installing-source-distribution409328
Node: installing-development-tree419303
Node: source-configuration-options423747
Ref: cmake-general-options435237
Ref: option_cmake_build_config435263
Ref: option_cmake_cmake_build_type435466
Ref: option_cmake_cpack_monolithic_install435922
Ref: cmake-installation-layout-options436334
Ref: option_cmake_cmake_install_prefix436659
Ref: option_cmake_install_bindir436819
Ref: option_cmake_install_docdir436892
Ref: option_cmake_install_docreadmedir436965
Ref: option_cmake_install_includedir437045
Ref: option_cmake_install_infodir437121
Ref: option_cmake_install_layout437192
Ref: option_cmake_install_libdir437751
Ref: option_cmake_install_mandir437824
Ref: option_cmake_install_mysqlsharedir437896
Ref: option_cmake_install_mysqltestdir437980
Ref: option_cmake_install_plugindir438220
Ref: option_cmake_install_sbindir438385
Ref: option_cmake_install_scriptdir438480
Ref: option_cmake_install_sharedir438585
Ref: option_cmake_install_sqlbenchdir438665
Ref: option_cmake_install_supportfilesdir438883
Ref: option_cmake_mysql_datadir438971
Ref: option_cmake_odbc_includes439133
Ref: option_cmake_odbc_lib_dir439273
Ref: option_cmake_sysconfdir439411
Ref: option_cmake_with_unixodbc439711
Ref: option_cmake_storage_engine_options439785
Ref: cmake-feature-options441795
Ref: option_cmake_compilation_comment441821
Ref: option_cmake_default_charset441922
Ref: option_cmake_default_collation442726
Ref: option_cmake_enable_debug_sync443067
Ref: option_cmake_enable_downloads443985
Ref: option_cmake_enable_dtrace444206
Ref: option_cmake_enable_gcov444353
Ref: option_cmake_enabled_local_infile444433
Ref: option_cmake_enabled_profiling444780
Ref: option_cmake_ignore_aio_check444969
Ref: option_cmake_mysql_maintainer_mode445311
Ref: option_cmake_mysql_project_name445503
Ref: option_cmake_mysql_tcp_port445673
Ref: option_cmake_mysql_unix_addr445883
Ref: option_cmake_with_debug446158
Ref: option_cmake_with_embedded_server446562
Ref: option_cmake_with_extra_charsets446663
Ref: option_cmake_with_libedit446893
Ref: option_cmake_with_libwrap446996
Ref: option_cmake_with_readline447084
Ref: option_cmake_with_ssl447194
Ref: option_cmake_with_zlib447645
Ref: option_cmake_without_server448095
Ref: cmake-compiler-flags448226
Ref: option_cmake_have_embedded_privilege_control448591
Ref: cmake-mysql-cluster-options448772
Ref: option_cmake_memcached_home449078
Ref: option_cmake_with_bundled_libevent450011
Ref: option_cmake_with_bundled_memcached450295
Ref: option_cmake_with_classpath450785
Ref: option_cmake_with_error_insert451011
Ref: option_cmake_with_ndbcluster_storage_engine451220
Ref: option_cmake_with_ndbcluster451443
Ref: option_cmake_with_ndbmtd451540
Ref: option_cmake_with_ndb_binlog451691
Ref: option_cmake_with_ndb_debug451842
Ref: option_cmake_with_ndb_java451970
Ref: option_cmake_with_ndb_port452406
Ref: option_cmake_with_ndb_test452688
Node: compilation-problems452800
Node: source-configuration-third-party456550
Node: postinstallation457516
Node: unix-postinstallation458927
Node: mysql-install-db-problems475665
Node: automatic-start482666
Node: starting-server490514
Node: default-privileges498018
Node: upgrading-downgrading509735
Node: upgrading510281
Node: upgrading-from-previous-series517311
Node: upgrading-from-5-4543802
Node: downgrading556167
Node: downgrading-to-previous-series560264
Node: downgrading-from-enterprise561390
Node: checking-table-incompatibilities564613
Node: rebuilding-tables571445
Node: copying-databases576742
Node: environment-variables579740
Node: perl-support583818
Node: perl-installation585371
Node: activestate-perl588247
Node: perl-support-problems589412
Node: tutorial591390
Node: connecting-disconnecting593415
Node: entering-queries596154
Node: database-use604998
Node: creating-database608237
Node: creating-tables610657
Node: loading-tables615097
Node: retrieving-data618794
Node: selecting-all620002
Node: selecting-rows622221
Node: selecting-columns626023
Node: sorting-rows628171
Node: date-calculations631069
Node: working-with-null638076
Node: pattern-matching640722
Node: counting-rows648229
Node: multiple-tables653265
Node: getting-information658715
Node: batch-mode661769
Node: examples664994
Node: example-maximum-column667200
Node: example-maximum-row667557
Node: example-maximum-column-group668699
Node: example-maximum-column-group-row669238
Node: example-user-variables670957
Node: example-foreign-keys672050
Node: searching-on-two-keys676309
Node: calculating-days677257
Node: example-auto-increment678434
Node: apache684046
Node: programs684944
Node: programs-overview686033
Node: programs-using696909
Node: invoking-programs697325
Node: connecting700794
Ref: option_general_host706590
Ref: option_general_password706715
Ref: option_general_pipe707008
Ref: option_general_port707199
Ref: option_general_protocol707361
Ref: option_general_shared-memory-base-name708877
Ref: option_general_socket709217
Ref: option_general_user709947
Node: program-options711086
Node: command-line-options714449
Node: option-modifiers719571
Node: option-files721751
Node: option-file-options734245
Ref: option_general_defaults-extra-file735183
Ref: option_general_defaults-file735620
Ref: option_general_defaults-group-suffix735984
Ref: option_general_no-defaults736424
Ref: option_general_print-defaults736650
Node: program-variables736753
Node: option-defaults-equals740038
Node: setting-environment-variables748623
Node: programs-server751605
Node: mysqld752245
Node: mysqld-safe753689
Ref: option_mysqld_safe_help759460
Ref: option_mysqld_safe_basedir759515
Ref: option_mysqld_safe_core-file-size759591
Ref: option_mysqld_safe_datadir759758
Ref: option_mysqld_safe_defaults-extra-file759820
Ref: option_mysqld_safe_defaults-file760112
Ref: option_mysqld_safe_ledir760301
Ref: option_mysqld_safe_log-error760488
Ref: option_mysqld_safe_malloc-lib760587
Ref: option_mysqld_safe_mysqld762813
Ref: option_mysqld_safe_mysqld-version763241
Ref: option_mysqld_safe_nice763775
Ref: option_mysqld_safe_no-defaults763894
Ref: option_mysqld_safe_open-files-limit764023
Ref: option_mysqld_safe_pid-file764293
Ref: option_mysqld_safe_plugin-dir764367
Ref: option_mysqld_safe_port764482
Ref: option_mysqld_safe_skip-kill-mysqld764700
Ref: option_mysqld_safe_socket764843
Ref: option_mysqld_safe_syslog764963
Ref: option_mysqld_safe_syslog-tag765314
Ref: option_mysqld_safe_timezone765659
Ref: option_mysqld_safe_user765862
Node: mysql-server770714
Ref: option_mysql_server_basedir772369
Ref: option_mysql_server_datadir772445
Ref: option_mysql_server_pid-file772513
Ref: option_mysql_server_service-startup-timeout772629
Ref: option_mysql_server_use-mysqld_safe772996
Ref: option_mysql_server_user773114
Node: mysqld-multi773204
Ref: option_mysqld_multi_no-defaults776054
Ref: option_mysqld_multi_defaults-file776109
Ref: option_mysqld_multi_defaults-extra-file776179
Ref: option_mysqld_multi_help777145
Ref: option_mysqld_multi_config-file777200
Ref: option_mysqld_multi_example777405
Ref: option_mysqld_multi_log777460
Ref: option_mysqld_multi_mysqladmin777580
Ref: option_mysqld_multi_mysqld777694
Ref: option_mysqld_multi_no-log778405
Ref: option_mysqld_multi_password778538
Ref: option_mysqld_multi_silent778765
Ref: option_mysqld_multi_tcp-ip778820
Ref: option_mysqld_multi_user779174
Ref: option_mysqld_multi_verbose779299
Ref: option_mysqld_multi_version779341
Node: programs-installation785479
Node: comp-err786349
Ref: option_comp_err_help787331
Ref: option_comp_err_charset787392
Ref: option_comp_err_debug787507
Ref: option_comp_err_debug-info787694
Ref: option_comp_err_header_file787785
Ref: option_comp_err_in_file787908
Ref: option_comp_err_name_file788034
Ref: option_comp_err_out_dir788154
Ref: option_comp_err_out_file788271
Ref: option_comp_err_statefile788381
Ref: option_comp_err_version788508
Node: mysqlbug788572
Node: mysql-install-db789024
Ref: option_mysql_install_db_basedir791484
Ref: option_mysql_install_db_datadir791560
Ref: option_mysql_install_db_force791644
Ref: option_mysql_install_db_rpm791833
Ref: option_mysql_install_db_skip-name-resolve791993
Ref: option_mysql_install_db_srcdir792161
Ref: option_mysql_install_db_user792415
Ref: option_mysql_install_db_verbose792803
Ref: option_mysql_install_db_windows792894
Node: mysql-plugin792993
Ref: option_mysql_plugin_help797382
Ref: option_mysql_plugin_basedir797443
Ref: option_mysql_plugin_datadir797511
Ref: option_mysql_plugin_my-print-defaults797579
Ref: option_mysql_plugin_mysqld797706
Ref: option_mysql_plugin_no-defaults797794
Ref: option_mysql_plugin_plugin-dir798155
Ref: option_mysql_plugin_plugin-ini798228
Ref: option_mysql_plugin_print-defaults798572
Ref: option_mysql_plugin_verbose799092
Ref: option_mysql_plugin_version799277
Node: mysql-secure-installation799341
Node: mysql-tzinfo-to-sql800485
Node: mysql-upgrade802652
Ref: option_mysql_upgrade_help810308
Ref: option_mysql_upgrade_basedir810369
Ref: option_mysql_upgrade_datadir810547
Ref: option_mysql_upgrade_debug-check810706
Ref: option_mysql_upgrade_debug-info810792
Ref: option_mysql_upgrade_default-auth810919
Ref: option_mysql_upgrade_force811090
Ref: option_mysql_upgrade_plugin-dir811326
Ref: option_mysql_upgrade_tmpdir811684
Ref: option_mysql_upgrade_upgrade-system-tables811792
Ref: option_mysql_upgrade_user811890
Ref: option_mysql_upgrade_verbose812035
Ref: option_mysql_upgrade_version-check812126
Ref: option_mysql_upgrade_write-binlog812562
Node: programs-client812851
Node: mysql813664
Node: mysql-command-options815792
Ref: option_mysql_help825984
Ref: option_mysql_auto-rehash826045
Ref: option_mysql_auto-vertical-output826700
Ref: option_mysql_batch826980
Ref: option_mysql_bind-address827355
Ref: option_mysql_character-sets-dir827748
Ref: option_mysql_column-names827879
Ref: option_mysql_column-type-info827940
Ref: option_mysql_comments828009
Ref: option_mysql_compress828207
Ref: option_mysql_database828337
Ref: option_mysql_debug828450
Ref: option_mysql_debug-check828638
Ref: option_mysql_debug-info828724
Ref: option_mysql_default-auth828851
Ref: option_mysql_default-character-set829021
Ref: option_mysql_delimiter829629
Ref: option_mysql_disable-named-commands829742
Ref: option_mysql_enable-cleartext-plugin830119
Ref: option_mysql_execute830323
Ref: option_mysql_force830610
Ref: option_mysql_host830677
Ref: option_mysql_html830772
Ref: option_mysql_ignore-spaces830821
Ref: option_mysql_init-command831017
Ref: option_mysql_line-numbers831207
Ref: option_mysql_local-infile831314
Ref: option_mysql_named-commands831673
Ref: option_mysql_no-auto-rehash831972
Ref: option_mysql_no-beep832106
Ref: option_mysql_no-named-commands832168
Ref: option_mysql_no-pager832316
Ref: option_mysql_no-tee832450
Ref: option_mysql_one-database832575
Ref: option_mysql_pager834475
Ref: option_mysql_password834901
Ref: option_mysql_pipe835464
Ref: option_mysql_plugin-dir835623
Ref: option_mysql_port835959
Ref: option_mysql_prompt836055
Ref: option_mysql_protocol836256
Ref: option_mysql_quick836569
Ref: option_mysql_raw836803
Ref: option_mysql_reconnect837759
Ref: option_mysql_safe-updates838002
Ref: option_mysql_secure-auth838390
Ref: option_mysql_show-warnings838746
Ref: option_mysql_sigint-ignore838899
Ref: option_mysql_silent839005
Ref: option_mysql_skip-column-names839335
Ref: option_mysql_skip-line-numbers839414
Ref: option_mysql_socket839572
Ref: option_mysql_ssl839729
Ref: option_mysql_table839923
Ref: option_mysql_tee840090
Ref: option_mysql_unbuffered840271
Ref: option_mysql_user840340
Ref: option_mysql_verbose840446
Ref: option_mysql_version840703
Ref: option_mysql_vertical840772
Ref: option_mysql_wait840988
Ref: option_mysql_xml841098
Ref: option_mysql_connect_timeout842431
Ref: option_mysql_max_allowed_packet842540
Ref: option_mysql_max_join_size842684
Ref: option_mysql_net_buffer_length842816
Ref: option_mysql_select_limit842933
Node: mysql-commands843075
Node: mysql-logging858189
Node: mysql-server-side-help860607
Node: mysql-batch-commands863529
Node: mysql-tips865331
Node: mysql-input-editing865821
Node: vertical-query-results867737
Node: safe-updates868986
Node: mysql-reconnect870791
Node: mysqladmin872459
Ref: command_mysqladmin_db_name873150
Ref: command_mysqladmin_debug873217
Ref: command_mysqladmin_drop873461
Ref: command_mysqladmin_extended-status873543
Ref: command_mysqladmin_flush-hosts873628
Ref: command_mysqladmin_flush-logs873696
Ref: command_mysqladmin_flush-privileges873738
Ref: command_mysqladmin_flush-status873814
Ref: command_mysqladmin_flush-tables873866
Ref: command_mysqladmin_flush-threads873912
Ref: command_mysqladmin_kill873965
Ref: command_mysqladmin_old-password874098
Ref: command_mysqladmin_password874290
Ref: command_mysqladmin_ping876158
Ref: command_mysqladmin_processlist876521
Ref: command_mysqladmin_reload876836
Ref: command_mysqladmin_refresh876883
Ref: command_mysqladmin_shutdown876953
Ref: command_mysqladmin_start-slave876994
Ref: command_mysqladmin_status877058
Ref: command_mysqladmin_stop-slave877119
Ref: command_mysqladmin_variables877181
Ref: command_mysqladmin_version877260
Ref: option_mysqladmin_help884381
Ref: option_mysqladmin_bind-address884442
Ref: option_mysqladmin_character-sets-dir884834
Ref: option_mysqladmin_compress884965
Ref: option_mysqladmin_count885095
Ref: option_mysqladmin_debug885231
Ref: option_mysqladmin_debug-check885429
Ref: option_mysqladmin_debug-info885515
Ref: option_mysqladmin_default-auth885636
Ref: option_mysqladmin_default-character-set885806
Ref: option_mysqladmin_enable-cleartext-plugin885945
Ref: option_mysqladmin_force886149
Ref: option_mysqladmin_host886301
Ref: option_mysqladmin_no-beep886396
Ref: option_mysqladmin_password886540
Ref: option_mysqladmin_pipe887113
Ref: option_mysqladmin_plugin-dir887272
Ref: option_mysqladmin_port887618
Ref: option_mysqladmin_protocol887714
Ref: option_mysqladmin_relative888027
Ref: option_mysqladmin_silent888225
Ref: option_mysqladmin_sleep888322
Ref: option_mysqladmin_socket888613
Ref: option_mysqladmin_ssl888770
Ref: option_mysqladmin_user888964
Ref: option_mysqladmin_verbose889070
Ref: option_mysqladmin_version889167
Ref: option_mysqladmin_vertical889236
Ref: option_mysqladmin_wait889361
Ref: option_mysqladmin_connect_timeout889739
Ref: option_mysqladmin_shutdown_timeout889871
Node: mysqlcheck889999
Ref: option_mysqlcheck_help900255
Ref: option_mysqlcheck_all-databases900316
Ref: option_mysqlcheck_all-in-1900499
Ref: option_mysqlcheck_analyze900695
Ref: option_mysqlcheck_auto-repair900746
Ref: option_mysqlcheck_bind-address900902
Ref: option_mysqlcheck_character-sets-dir901294
Ref: option_mysqlcheck_check901425
Ref: option_mysqlcheck_check-only-changed901514
Ref: option_mysqlcheck_check-upgrade901657
Ref: option_mysqlcheck_compress901947
Ref: option_mysqlcheck_databases902071
Ref: option_mysqlcheck_debug902381
Ref: option_mysqlcheck_debug-check902552
Ref: option_mysqlcheck_debug-info902638
Ref: option_mysqlcheck_default-character-set902759
Ref: option_mysqlcheck_extended902898
Ref: option_mysqlcheck_default-auth903226
Ref: option_mysqlcheck_fast903397
Ref: option_mysqlcheck_fix-db-names903479
Ref: option_mysqlcheck_fix-table-names903618
Ref: option_mysqlcheck_force903789
Ref: option_mysqlcheck_host903856
Ref: option_mysqlcheck_medium-check903951
Ref: option_mysqlcheck_optimize904137
Ref: option_mysqlcheck_password904190
Ref: option_mysqlcheck_pipe904763
Ref: option_mysqlcheck_plugin-dir904922
Ref: option_mysqlcheck_port905269
Ref: option_mysqlcheck_protocol905365
Ref: option_mysqlcheck_quick905678
Ref: option_mysqlcheck_repair906005
Ref: option_mysqlcheck_silent906126
Ref: option_mysqlcheck_socket906196
Ref: option_mysqlcheck_ssl906353
Ref: option_mysqlcheck_tables906547
Ref: option_mysqlcheck_use-frm906688
Ref: option_mysqlcheck_user906884
Ref: option_mysqlcheck_verbose906990
Ref: option_mysqlcheck_version907105
Ref: option_mysqlcheck_write-binlog907174
Node: mysqldump907755
Ref: mysqldump-performance909312
Ref: mysqldump-syntax911708
Ref: option_mysqldump_help931220
Ref: option_mysqldump_add-drop-database931281
Ref: option_mysqldump_add-drop-table931675
Ref: option_mysqldump_add-drop-trigger931820
Ref: option_mysqldump_add-locks932149
Ref: option_mysqldump_all-databases932396
Ref: option_mysqldump_all-tablespaces932578
Ref: option_mysqldump_allow-keywords932919
Ref: option_mysqldump_apply-slave-statements933069
Ref: option_mysqldump_bind-address933416
Ref: option_mysqldump_character-sets-dir933806
Ref: option_mysqldump_comments933937
Ref: option_mysqldump_compact934180
Ref: option_mysqldump_compatible934389
Ref: option_mysqldump_complete-insert935305
Ref: option_mysqldump_compress935425
Ref: option_mysqldump_create-options935555
Ref: option_mysqldump_databases935688
Ref: option_mysqldump_debug936111
Ref: option_mysqldump_debug-check936314
Ref: option_mysqldump_debug-info936400
Ref: option_mysqldump_default-auth936521
Ref: option_mysqldump_default-character-set936691
Ref: option_mysqldump_delayed-insert936953
Ref: option_mysqldump_delete-master-logs937097
Ref: option_mysqldump_disable-keys937376
Ref: option_mysqldump_dump-date937832
Ref: option_mysqldump_dump-slave938386
Ref: option_mysqldump_events939571
Ref: option_mysqldump_extended-insert939677
Ref: option_mysqldump_fields939898
Ref: option_mysqldump_first-slave940237
Ref: option_mysqldump_flush-logs940361
Ref: option_mysqldump_flush-privileges941070
Ref: option_mysqldump_force941399
Ref: option_mysqldump_host941994
Ref: option_mysqldump_hex-blob942131
Ref: option_mysqldump_include-master-host-port942419
Ref: option_mysqldump_ignore-table942747
Ref: option_mysqldump_insert-ignore943008
Ref: option_mysqldump_lines-terminated-by943140
Ref: option_mysqldump_lock-all-tables943360
Ref: option_mysqldump_lock-tables943617
Ref: option_mysqldump_log-error944289
Ref: option_mysqldump_master-data944426
Ref: option_mysqldump_no-autocommit947877
Ref: option_mysqldump_no-create-db948055
Ref: option_mysqldump_no-create-info948282
Ref: option_mysqldump_no-data948653
Ref: option_mysqldump_no-set-names948964
Ref: option_mysqldump_no-tablespaces949050
Ref: option_mysqldump_opt949290
Ref: option_mysqldump_order-by-primary949888
Ref: option_mysqldump_password950183
Ref: option_mysqldump_pipe950754
Ref: option_mysqldump_plugin-dir950913
Ref: option_mysqldump_port951257
Ref: option_mysqldump_protocol951353
Ref: option_mysqldump_quick951666
Ref: option_mysqldump_quote-names951951
Ref: option_mysqldump_replace952374
Ref: option_mysqldump_result-file952496
Ref: option_mysqldump_routines952862
Ref: option_mysqldump_set-charset953934
Ref: option_mysqldump_single-transaction954126
Ref: option_mysqldump_skip-comments956220
Ref: option_mysqldump_skip-opt956300
Ref: option_mysqldump_socket956370
Ref: option_mysqldump_ssl956527
Ref: option_mysqldump_tab956721
Ref: option_mysqldump_tables957784
Ref: option_mysqldump_triggers957956
Ref: option_mysqldump_tz-utc958111
Ref: option_mysqldump_user958792
Ref: option_mysqldump_verbose958898
Ref: option_mysqldump_version958995
Ref: option_mysqldump_where959064
Ref: option_mysqldump_xml959420
Ref: option_mysqldump_max_allowed_packet962913
Ref: option_mysqldump_net_buffer_length963057
Node: mysqlimport966370
Ref: option_mysqlimport_help973172
Ref: option_mysqlimport_bind-address973233
Ref: option_mysqlimport_character-sets-dir973627
Ref: option_mysqlimport_columns973758
Ref: option_mysqlimport_compress973985
Ref: option_mysqlimport_debug974115
Ref: option_mysqlimport_debug-check974286
Ref: option_mysqlimport_debug-info974372
Ref: option_mysqlimport_default-character-set974493
Ref: option_mysqlimport_default-auth974632
Ref: option_mysqlimport_delete974803
Ref: option_mysqlimport_fields974881
Ref: option_mysqlimport_force975169
Ref: option_mysqlimport_host975406
Ref: option_mysqlimport_ignore975543
Ref: option_mysqlimport_ignore-lines975621
Ref: option_mysqlimport_lines-terminated-by975696
Ref: option_mysqlimport_local976136
Ref: option_mysqlimport_lock-tables976212
Ref: option_mysqlimport_low-priority976377
Ref: option_mysqlimport_password976572
Ref: option_mysqlimport_pipe977147
Ref: option_mysqlimport_plugin-dir977306
Ref: option_mysqlimport_port977660
Ref: option_mysqlimport_protocol977756
Ref: option_mysqlimport_replace978069
Ref: option_mysqlimport_silent978584
Ref: option_mysqlimport_socket978666
Ref: option_mysqlimport_ssl978823
Ref: option_mysqlimport_user979017
Ref: option_mysqlimport_use-threads979123
Ref: option_mysqlimport_verbose979194
Ref: option_mysqlimport_version979291
Node: mysqlshow980170
Ref: option_mysqlshow_help985989
Ref: option_mysqlshow_bind-address986050
Ref: option_mysqlshow_character-sets-dir986440
Ref: option_mysqlshow_compress986571
Ref: option_mysqlshow_count986701
Ref: option_mysqlshow_debug986806
Ref: option_mysqlshow_debug-check986977
Ref: option_mysqlshow_debug-info987063
Ref: option_mysqlshow_default-character-set987184
Ref: option_mysqlshow_default-auth987323
Ref: option_mysqlshow_host987494
Ref: option_mysqlshow_keys987589
Ref: option_mysqlshow_password987637
Ref: option_mysqlshow_pipe988208
Ref: option_mysqlshow_plugin-dir988367
Ref: option_mysqlshow_port988712
Ref: option_mysqlshow_protocol988808
Ref: option_mysqlshow_show-table-type989121
Ref: option_mysqlshow_socket989287
Ref: option_mysqlshow_ssl989444
Ref: option_mysqlshow_status989638
Ref: option_mysqlshow_user989712
Ref: option_mysqlshow_verbose989818
Ref: option_mysqlshow_version990003
Node: mysqlslap990067
Ref: option_mysqlslap_help1001000
Ref: option_mysqlslap_auto-generate-sql1001061
Ref: option_mysqlslap_auto-generate-sql-add-autoincrement1001207
Ref: option_mysqlslap_auto-generate-sql-execute-number1001326
Ref: option_mysqlslap_auto-generate-sql-guid-primary1001430
Ref: option_mysqlslap_auto-generate-sql-load-type1001542
Ref: option_mysqlslap_auto-generate-sql-secondary-indexes1001847
Ref: option_mysqlslap_auto-generate-sql-unique-query-number1002012
Ref: option_mysqlslap_auto-generate-sql-unique-write-number1002362
Ref: option_mysqlslap_auto-generate-sql-write-number1002523
Ref: option_mysqlslap_commit1002641
Ref: option_mysqlslap_compress1002762
Ref: option_mysqlslap_concurrency1002892
Ref: option_mysqlslap_create1003022
Ref: option_mysqlslap_create-schema1003132
Ref: option_mysqlslap_csv1003414
Ref: option_mysqlslap_debug1003584
Ref: option_mysqlslap_debug-check1003781
Ref: option_mysqlslap_debug-info1003867
Ref: option_mysqlslap_default-auth1003994
Ref: option_mysqlslap_delimiter1004165
Ref: option_mysqlslap_detach1004294
Ref: option_mysqlslap_enable-cleartext-plugin1004441
Ref: option_mysqlslap_engine1004645
Ref: option_mysqlslap_host1004746
Ref: option_mysqlslap_iterations1004841
Ref: option_mysqlslap_no-drop1004917
Ref: option_mysqlslap_number-char-cols1005081
Ref: option_mysqlslap_number-int-cols1005221
Ref: option_mysqlslap_number-of-queries1005365
Ref: option_mysqlslap_only-print1005876
Ref: option_mysqlslap_password1006006
Ref: option_mysqlslap_pipe1006577
Ref: option_mysqlslap_plugin-dir1006736
Ref: option_mysqlslap_port1007081
Ref: option_mysqlslap_post-query1007177
Ref: option_mysqlslap_shared-memory-base-name1007359
Ref: option_mysqlslap_post-system1007593
Ref: option_mysqlslap_pre-query1007753
Ref: option_mysqlslap_pre-system1007928
Ref: option_mysqlslap_protocol1008081
Ref: option_mysqlslap_query1008394
Ref: option_mysqlslap_silent1008536
Ref: option_mysqlslap_socket1008590
Ref: option_mysqlslap_ssl1008747
Ref: option_mysqlslap_user1008941
Ref: option_mysqlslap_verbose1009047
Ref: option_mysqlslap_version1009232
Node: programs-admin-utils1009296
Node: innochecksum1010986
Ref: option_innochecksum_count1012522
Ref: option_innochecksum_debug1012590
Ref: option_innochecksum_end1012652
Ref: option_innochecksum_page1012699
Ref: option_innochecksum_start1012750
Ref: option_innochecksum_verbose1012799
Node: myisam-ftdump1012873
Ref: option_myisam_ftdump_help1015242
Ref: option_myisam_ftdump_count1015308
Ref: option_myisam_ftdump_dump1015396
Ref: option_myisam_ftdump_length1015481
Ref: option_myisam_ftdump_stats1015543
Ref: option_myisam_ftdump_verbose1015675
Node: myisamchk1015762
Node: myisamchk-general-options1028998
Ref: option_myisamchk_help1029463
Ref: option_myisamchk_HELP1029571
Ref: option_myisamchk_debug1029677
Ref: option_myisamchk_silent1029870
Ref: option_myisamchk_verbose1030037
Ref: option_myisamchk_version1030243
Ref: option_myisamchk_wait1030312
Node: myisamchk-check-options1035148
Ref: option_myisamchk_check1035451
Ref: option_myisamchk_check-only-changed1035611
Ref: option_myisamchk_extend-check1035711
Ref: option_myisamchk_fast1036390
Ref: option_myisamchk_force1036471
Ref: option_myisamchk_information1036694
Ref: option_myisamchk_medium-check1036793
Ref: option_myisamchk_read-only1036982
Ref: option_myisamchk_update-state1037278
Node: myisamchk-repair-options1037665
Ref: option_myisamchk_backup1038053
Ref: option_myisamchk_character-sets-dir1038140
Ref: option_myisamchk_correct-checksum1038271
Ref: option_myisamchk_data-file-length1038353
Ref: option_myisamchk_keys-used1038998
Ref: option_myisamchk_no-symlinks1039444
Ref: option_myisamchk_max-record-length1039728
Ref: option_myisamchk_parallel-recover1039881
Ref: option_myisamchk_quick1040085
Ref: option_myisamchk_recover1040339
Ref: option_myisamchk_safe-recover1040917
Ref: option_myisamchk_set-character-set1041513
Ref: option_myisamchk_set-collation1041672
Ref: option_myisamchk_sort-recover1041849
Ref: option_myisamchk_tmpdir1042010
Ref: option_myisamchk_unpack1042495
Node: myisamchk-other-options1042588
Ref: option_myisamchk_analyze1042904
Ref: option_myisamchk_block-search1043323
Ref: option_myisamchk_description1043434
Ref: option_myisamchk_set-auto-increment1043647
Ref: option_myisamchk_sort-index1044016
Ref: option_myisamchk_sort-records1044169
Node: myisamchk-table-info1045159
Node: myisamchk-memory1059456
Node: myisamlog1062519
Ref: option_myisamlog_help1063366
Ref: option_myisamlog_files1063467
Ref: option_myisamlog_information1063529
Ref: option_myisamlog_offset1063589
Ref: option_myisamlog_path1063643
Ref: option_myisamlog_recovery1063694
Ref: option_myisamlog_record-position1063742
Ref: option_myisamlog_update1063837
Ref: option_myisamlog_verbose1063884
Ref: option_myisamlog_write1064042
Ref: option_myisamlog_version1064095
Node: myisampack1064137
Ref: option_myisampack_help1066118
Ref: option_myisampack_backup1066179
Ref: option_myisampack_character-sets-dir1066285
Ref: option_myisampack_debug1066416
Ref: option_myisampack_force1066587
Ref: option_myisampack_join1067220
Ref: option_myisampack_silent1067934
Ref: option_myisampack_test1068014
Ref: option_myisampack_tmpdir1068096
Ref: option_myisampack_verbose1068244
Ref: option_myisampack_version1068372
Ref: option_myisampack_wait1068441
Node: mysqlaccess1079571
Ref: option_mysqlaccess_help1082548
Ref: option_mysqlaccess_brief1082609
Ref: option_mysqlaccess_commit1082686
Ref: option_mysqlaccess_copy1082957
Ref: option_mysqlaccess_db1083033
Ref: option_mysqlaccess_debug1083102
Ref: option_mysqlaccess_host1083185
Ref: option_mysqlaccess_howto1083280
Ref: option_mysqlaccess_old_server1083385
Ref: option_mysqlaccess_password1083543
Ref: option_mysqlaccess_plan1083922
Ref: option_mysqlaccess_preview1083995
Ref: option_mysqlaccess_relnotes1084108
Ref: option_mysqlaccess_rhost1084161
Ref: option_mysqlaccess_rollback1084257
Ref: option_mysqlaccess_spassword1084343
Ref: option_mysqlaccess_superuser1084746
Ref: option_mysqlaccess_table1084854
Ref: option_mysqlaccess_user1084917
Ref: option_mysqlaccess_version1085012
Node: mysqlbinlog1085642
Ref: option_mysqlbinlog_help1094931
Ref: option_mysqlbinlog_base64-output1094992
Ref: option_mysqlbinlog_bind-address1097201
Ref: option_mysqlbinlog_character-sets-dir1097460
Ref: option_mysqlbinlog_database1097591
Ref: option_mysqlbinlog_debug1101441
Ref: option_mysqlbinlog_debug-check1101640
Ref: option_mysqlbinlog_debug-info1101726
Ref: option_mysqlbinlog_default-auth1101847
Ref: option_mysqlbinlog_disable-log-bin1102018
Ref: option_mysqlbinlog_force-if-open1102683
Ref: option_mysqlbinlog_force-read1102798
Ref: option_mysqlbinlog_hexdump1103098
Ref: option_mysqlbinlog_host1103284
Ref: option_mysqlbinlog_local-load1103392
Ref: option_mysqlbinlog_offset1103687
Ref: option_mysqlbinlog_password1103758
Ref: option_mysqlbinlog_plugin-dir1104333
Ref: option_mysqlbinlog_port1104687
Ref: option_mysqlbinlog_position1104798
Ref: option_mysqlbinlog_protocol1104916
Ref: option_mysqlbinlog_read-from-remote-server1105229
Ref: option_mysqlbinlog_result-file1105693
Ref: option_mysqlbinlog_server-id1105771
Ref: option_mysqlbinlog_server-id-bits1105882
Ref: option_mysqlbinlog_set-charset1106451
Ref: option_mysqlbinlog_short-form1106619
Ref: option_mysqlbinlog_socket1106836
Ref: option_mysqlbinlog_start-datetime1106993
Ref: option_mysqlbinlog_start-position1107604
Ref: option_mysqlbinlog_stop-datetime1107917
Ref: option_mysqlbinlog_stop-position1108327
Ref: option_mysqlbinlog_to-last-log1108629
Ref: option_mysqlbinlog_user1108956
Ref: option_mysqlbinlog_verbose1109067
Ref: option_mysqlbinlog_version1109430
Ref: option_mysqlbinlog_open_files_limit1109679
Node: mysqlbinlog-hexdump1113657
Node: mysqlbinlog-row-events1124856
Node: mysqldumpslow1133808
Ref: option_mysqldumpslow_help1135660
Ref: option_mysqldumpslow_abstract1135715
Ref: option_mysqldumpslow_debug1135790
Ref: option_mysqldumpslow_grep1135838
Ref: option_mysqldumpslow_host1135925
Ref: option_mysqldumpslow_instance1136078
Ref: option_mysqldumpslow_lock1136193
Ref: option_mysqldumpslow_abstract-numbers1136254
Ref: option_mysqldumpslow_reverse1136328
Ref: option_mysqldumpslow_sort1136370
Ref: option_mysqldumpslow_top1136821
Ref: option_mysqldumpslow_verbose1136889
Node: mysqlhotcopy1137489
Ref: option_mysqlhotcopy_help1141532
Ref: option_mysqlhotcopy_addtodest1141593
Ref: option_mysqlhotcopy_allowold1141696
Ref: option_mysqlhotcopy_checkpoint1141798
Ref: option_mysqlhotcopy_chroot1141930
Ref: option_mysqlhotcopy_debug1142139
Ref: option_mysqlhotcopy_dryrun1142183
Ref: option_mysqlhotcopy_flushlog1142253
Ref: option_mysqlhotcopy_host1142319
Ref: option_mysqlhotcopy_keepold1142544
Ref: option_mysqlhotcopy_method1142620
Ref: option_mysqlhotcopy_noindices1142719
Ref: option_mysqlhotcopy_password1142999
Ref: option_mysqlhotcopy_port1143396
Ref: option_mysqlhotcopy_old_server1143509
Ref: option_mysqlhotcopy_quiet1143845
Ref: option_mysqlhotcopy_record_log_pos1143903
Ref: option_mysqlhotcopy_regexp1144042
Ref: option_mysqlhotcopy_resetmaster1144147
Ref: option_mysqlhotcopy_resetslave1144227
Ref: option_mysqlhotcopy_socket1144314
Ref: option_mysqlhotcopy_suffix1144414
Ref: option_mysqlhotcopy_tmpdir1144491
Ref: option_mysqlhotcopy_user1144568
Node: mysql-convert-table-format1144902
Ref: option_mysql_convert_table_format_help1145887
Ref: option_mysql_convert_table_format_force1145942
Ref: option_mysql_convert_table_format_host1145996
Ref: option_mysql_convert_table_format_password1146075
Ref: option_mysql_convert_table_format_port1146468
Ref: option_mysql_convert_table_format_socket1146549
Ref: option_mysql_convert_table_format_type1146639
Ref: option_mysql_convert_table_format_user1146802
Ref: option_mysql_convert_table_format_verbose1146892
Ref: option_mysql_convert_table_format_version1146983
Node: mysql-find-rows1147041
Ref: option_mysql_find_rows_help1148120
Ref: option_mysql_find_rows_regexp1148192
Ref: option_mysql_find_rows_rows1148264
Ref: option_mysql_find_rows_skip-use-db1148321
Ref: option_mysql_find_rows_start_row1148405
Node: mysql-fix-extensions1148457
Node: mysql-setpermission1149409
Ref: option_mysql_setpermission_help1150666
Ref: option_mysql_setpermission_host1150721
Ref: option_mysql_setpermission_password1150800
Ref: option_mysql_setpermission_port1151193
Ref: option_mysql_setpermission_socket1151274
Ref: option_mysql_setpermission_user1151364
Node: mysql-waitpid1151449
Ref: option_mysql_waitpid_help1152531
Ref: option_mysql_waitpid_verbose1152598
Ref: option_mysql_waitpid_version1152726
Node: mysql-zap1152790
Ref: option_mysql_zap_help1153890
Ref: option_mysql_zap_force1153957
Ref: option_mysql_zap_test1154074
Node: programs-development1154162
Node: msql2mysql1156089
Node: mysql-config1157235
Ref: option_mysql_config_cflags1157759
Ref: option_mysql_config_include1158165
Ref: option_mysql_config_libmysqld-libs1158236
Ref: option_mysql_config_libs1158358
Ref: option_mysql_config_libs_r1158455
Ref: option_mysql_config_plugindir1158708
Ref: option_mysql_config_port1158812
Ref: option_mysql_config_socket1158898
Ref: option_mysql_config_version1158984
Node: my-print-defaults1160302
Ref: option_my_print_defaults_help1161332
Ref: option_my_print_defaults_config-file1161393
Ref: option_my_print_defaults_debug1161516
Ref: option_my_print_defaults_defaults-extra-file1161717
Ref: option_my_print_defaults_defaults-group-suffix1161911
Ref: option_my_print_defaults_no-defaults1162068
Ref: option_my_print_defaults_verbose1162127
Ref: option_my_print_defaults_version1162224
Node: resolve-stack-dump1162288
Ref: option_resolve_stack_dump_help1163137
Ref: option_resolve_stack_dump_numeric-dump-file1163198
Ref: option_resolve_stack_dump_symbols-file1163301
Ref: option_resolve_stack_dump_version1163385
Node: programs-miscellaneous1163503
Node: perror1163901
Ref: option_perror_help1165159
Ref: option_perror_ndb1165236
Ref: option_perror_silent1165313
Ref: option_perror_verbose1165386
Ref: option_perror_version1165496
Node: replace-utility1165560
Ref: option_replace_help1167096
Ref: option_replace_debug1167153
Ref: option_replace_silent1167202
Ref: option_replace_verbose1167279
Ref: option_replace_version1167363
Node: resolveip1167414
Ref: option_resolveip_help1167910
Ref: option_resolveip_silent1167987
Ref: option_resolveip_version1168051
Node: server-administration1168115
Node: mysqld-server1168991
Node: mysqld-option-tables1171043
Node: server-configuration-defaults1262881
Node: server-options1264309
Ref: option_mysqld_help1267641
Ref: option_mysqld_allow-suspicious-udfs1267980
Ref: option_mysqld_ansi1268780
Ref: option_mysqld_basedir1269204
Ref: option_mysqld_big-tables1269910
Ref: option_mysqld_bind-address1270834
Ref: option_mysqld_binlog-format1273524
Ref: option_mysqld_bootstrap1275003
Ref: option_mysqld_character-sets-dir1275367
Ref: option_mysqld_character-set-client-handshake1276056
Ref: option_mysqld_character-set-filesystem1276739
Ref: option_mysqld_character-set-server1277475
Ref: option_mysqld_chroot1278337
Ref: option_mysqld_collation-server1279106
Ref: option_mysqld_console1279790
Ref: option_mysqld_core-file1280426
Ref: option_mysqld_datadir1281805
Ref: option_mysqld_debug1282433
Ref: option_mysqld_debug-sync-timeout1283940
Ref: option_mysqld_default-character-set1285134
Ref: option_mysqld_default-collation1285869
Ref: option_mysqld_default-storage-engine1286494
Ref: option_mysqld_default-time-zone1287761
Ref: option_mysqld_delay-key-write1288387
Ref: option_mysqld_des-key-file1289778
Ref: option_mysqld_enable-locking1290124
Ref: option_mysqld_enable-named-pipe1290253
Ref: option_mysqld_enable-pstack1290595
Ref: option_mysqld_engine-condition-pushdown1291140
Ref: option_mysqld_event-scheduler1292078
Ref: option_mysqld_exit-info1292927
Ref: option_mysqld_external-locking1293546
Ref: option_mysqld_flush1294494
Ref: option_mysqld_gdb1295268
Ref: option_mysqld_general-log1295809
Ref: option_mysqld_init-file1296584
Ref: option_mysqld_install1297412
Ref: option_mysqld_install-manual1297951
Ref: option_mysqld_language1298567
Ref: option_mysqld_large-pages1299789
Ref: option_mysqld_lc-messages1301075
Ref: option_mysqld_lc-messages-dir1301895
Ref: option_mysqld_log1302686
Ref: option_mysqld_log-error1304076
Ref: option_mysqld_log-isam1304851
Ref: option_mysqld_log-long-format1305313
Ref: option_mysqld_log-output1306125
Ref: option_mysqld_log-queries-not-using-indexes1307742
Ref: option_mysqld_log-short-format1308757
Ref: option_mysqld_log-slow-admin-statements1309246
Ref: option_mysqld_log-slow-queries1310079
Ref: option_mysqld_log-tc1311572
Ref: option_mysqld_log-tc-size1312303
Ref: option_mysqld_log-warnings1313150
Ref: option_mysqld_low-priority-updates1315458
Ref: option_mysqld_min-examined-row-limit1316619
Ref: option_mysqld_memlock1317860
Ref: option_mysqld_myisam-block-size1319839
Ref: option_mysqld_myisam-recover1320424
Ref: option_mysqld_myisam-recover-options1320617
Ref: option_mysqld_old-alter-table1323568
Ref: option_mysqld_old-style-user-limits1324599
Ref: option_mysqld_one-thread1325249
Ref: option_mysqld_open-files-limit1325713
Ref: option_mysqld_partition1327142
Ref: option_mysqld_pid-file1327649
Ref: option_mysqld_plugin1328497
Ref: option_mysqld_plugin-load1329802
Ref: option_mysqld_port1332264
Ref: option_mysqld_port-open-timeout1333109
Ref: option_mysqld_remove1333877
Ref: option_mysqld_safe-mode1334221
Ref: option_mysqld_safe-show-database1334548
Ref: option_mysqld_safe-user-create1335482
Ref: option_mysqld_secure-auth1336533
Ref: option_mysqld_secure-file-priv1337878
Ref: option_mysqld_shared-memory1338648
Ref: option_mysqld_shared-memory-base-name1339032
Ref: option_mysqld_skip-concurrent-insert1339526
Ref: option_mysqld_skip-event-scheduler1339764
Ref: option_mysqld_skip-grant-tables1340277
Ref: option_mysqld_skip-host-cache1341323
Ref: option_mysqld_skip-name-resolve1341820
Ref: option_mysqld_skip-networking1342084
Ref: option_mysqld_skip-partition1342431
Ref: option_mysqld_ssl_xxxx1343571
Ref: option_mysqld_standalone1343769
Ref: option_mysqld_super-large-pages1344093
Ref: option_mysqld_symbolic-links1344933
Ref: option_mysqld_skip-safemalloc1345968
Ref: option_mysqld_skip-show-database1346618
Ref: option_mysqld_skip-stack-trace1347229
Ref: option_mysqld_skip-thread-priority1347665
Ref: option_mysqld_slow-query-log1348063
Ref: option_mysqld_slow-start-timeout1348853
Ref: option_mysqld_socket1349731
Ref: option_mysqld_sql-mode1350805
Ref: option_mysqld_sysdate-is-now1352703
Ref: option_mysqld_tc-heuristic-recover1353565
Ref: option_mysqld_temp-pool1354149
Ref: option_mysqld_transaction-isolation1354974
Ref: option_mysqld_tmpdir1355925
Ref: option_mysqld_user1357520
Ref: option_mysqld_verbose1359178
Ref: option_mysqld_version1359269
Node: server-system-variables1360351
Ref: sysvar_authentication_windows_log_level1402606
Ref: sysvar_authentication_windows_use_principal_name1403919
Ref: sysvar_autocommit1405763
Ref: sysvar_automatic_sp_privileges1407849
Ref: sysvar_back_log1409069
Ref: sysvar_basedir1410525
Ref: sysvar_big_tables1411300
Ref: sysvar_bulk_insert_buffer_size1411887
Ref: sysvar_character_set_client1413389
Ref: sysvar_character_set_connection1415230
Ref: sysvar_character_set_database1415800
Ref: sysvar_character_set_filesystem1417417
Ref: sysvar_character_set_results1418745
Ref: sysvar_character_set_server1419293
Ref: sysvar_character_set_system1419924
Ref: sysvar_character_sets_dir1420413
Ref: sysvar_collation_connection1421055
Ref: sysvar_collation_database1421538
Ref: sysvar_collation_server1423135
Ref: sysvar_completion_type1423742
Ref: sysvar_concurrent_insert1426654
Ref: sysvar_connect_timeout1429211
Ref: sysvar_datadir1430139
Ref: sysvar_date_format1430802
Ref: sysvar_datetime_format1430854
Ref: sysvar_debug1430910
Ref: sysvar_debug_sync1432584
Ref: sysvar_default_storage_engine1434148
Ref: sysvar_default_week_format1435593
Ref: sysvar_delay_key_write1436414
Ref: sysvar_delayed_insert_limit1438489
Ref: sysvar_delayed_insert_timeout1439818
Ref: sysvar_delayed_queue_size1440582
Ref: sysvar_div_precision_increment1441912
Ref: sysvar_engine_condition_pushdown1443342
Ref: sysvar_error_count1445339
Ref: sysvar_event_scheduler1445513
Ref: sysvar_expire_logs_days1446527
Ref: sysvar_external_user1447597
Ref: sysvar_flush1448327
Ref: sysvar_flush_time1449225
Ref: sysvar_foreign_key_checks1450041
Ref: sysvar_ft_boolean_syntax1450997
Ref: sysvar_ft_max_word_len1452495
Ref: sysvar_ft_min_word_len1453267
Ref: sysvar_ft_query_expansion_limit1454082
Ref: sysvar_ft_stopword_file1454887
Ref: sysvar_general_log1456158
Ref: sysvar_general_log_file1457096
Ref: sysvar_group_concat_max_len1457894
Ref: sysvar_have_compress1459090
Ref: sysvar_have_crypt1459280
Ref: sysvar_have_csv1459436
Ref: sysvar_have_dynamic_loading1459651
Ref: sysvar_have_geometry1459775
Ref: sysvar_have_innodb1459866
Ref: sysvar_have_openssl1460113
Ref: sysvar_have_partitioning1460183
Ref: sysvar_have_profiling1460442
Ref: sysvar_have_query_cache1460675
Ref: sysvar_have_rtree_keys1460784
Ref: sysvar_have_ssl1460930
Ref: sysvar_have_symlink1461232
Ref: sysvar_hostname1461580
Ref: sysvar_identity1462003
Ref: sysvar_init_connect1462243
Ref: sysvar_init_file1464032
Ref: sysvar_insert_id1465307
Ref: sysvar_interactive_timeout1465534
Ref: sysvar_join_buffer_size1466498
Ref: sysvar_keep_files_on_create1470267
Ref: sysvar_key_buffer_size1471673
Ref: sysvar_key_cache_age_threshold1476125
Ref: sysvar_key_cache_block_size1477523
Ref: sysvar_key_cache_division_limit1478358
Ref: sysvar_language1479332
Ref: sysvar_large_files_support1480453
Ref: sysvar_large_pages1480799
Ref: sysvar_large_page_size1481502
Ref: sysvar_last_insert_id1482161
Ref: sysvar_lc_messages1482487
Ref: sysvar_lc_messages_dir1483288
Ref: sysvar_lc_time_names1484070
Ref: sysvar_license1484928
Ref: sysvar_local_infile1485361
Ref: sysvar_lock_wait_timeout1485959
Ref: sysvar_locked_in_memory1488226
Ref: sysvar_log1488552
Ref: sysvar_log_bin_trust_function_creators1489444
Ref: sysvar_log_error1490911
Ref: sysvar_log_output1491595
Ref: sysvar_log_queries_not_using_indexes1492860
Ref: sysvar_log_slow_queries1493608
Ref: sysvar_log_warnings1494527
Ref: sysvar_long_query_time1496073
Ref: sysvar_low_priority_updates1497472
Ref: sysvar_lower_case_file_system1498539
Ref: sysvar_lower_case_table_names1499285
Ref: sysvar_max_allowed_packet1501490
Ref: sysvar_max_connect_errors1503523
Ref: sysvar_max_connections1505228
Ref: sysvar_max_delayed_threads1506226
Ref: sysvar_max_error_count1507494
Ref: sysvar_max_heap_table_size1508382
Ref: sysvar_max_insert_delayed_threads1510473
Ref: sysvar_max_join_size1510982
Ref: sysvar_max_length_for_sort_data1512688
Ref: sysvar_max_long_data_size1513565
Ref: sysvar_max_prepared_stmt_count1514767
Ref: sysvar_max_relay_log_size1516185
Ref: sysvar_max_seeks_for_key1517521
Ref: sysvar_max_sort_length1519054
Ref: sysvar_max_sp_recursion_depth1519904
Ref: sysvar_max_tmp_tables1521076
Ref: sysvar_max_user_connections1521131
Ref: sysvar_max_write_lock_count1522726
Ref: sysvar_metadata_locks_cache_size1523892
Ref: sysvar_min_examined_row_limit1524758
Ref: sysvar_myisam_data_pointer_size1525953
Ref: sysvar_myisam_max_sort_file_size1526919
Ref: sysvar_myisam_mmap_size1528490
Ref: sysvar_myisam_recover_options1529876
Ref: sysvar_myisam_repair_threads1530229
Ref: sysvar_myisam_sort_buffer_size1531581
Ref: sysvar_myisam_stats_method1533242
Ref: sysvar_myisam_use_mmap1534731
Ref: sysvar_named_pipe1535362
Ref: sysvar_net_buffer_length1535901
Ref: sysvar_net_read_timeout1537334
Ref: sysvar_net_retry_count1538362
Ref: sysvar_net_write_timeout1539641
Ref: sysvar_new1540443
Ref: sysvar_old1541254
Ref: sysvar_old_alter_table1542270
Ref: sysvar_old_passwords1543303
Ref: sysvar_one_shot1545200
Ref: sysvar_open_files_limit1545343
Ref: sysvar_optimizer_prune_level1546394
Ref: sysvar_optimizer_search_depth1547387
Ref: sysvar_optimizer_switch1548794
Ref: sysvar_pid_file1551383
Ref: sysvar_plugin_dir1552032
Ref: sysvar_port1553792
Ref: sysvar_preload_buffer_size1554574
Ref: sysvar_profiling1555408
Ref: sysvar_profiling_history_size1555739
Ref: sysvar_protocol_version1556022
Ref: sysvar_proxy_user1556472
Ref: sysvar_pseudo_slave_mode1557092
Ref: sysvar_pseudo_thread_id1557597
Ref: sysvar_query_alloc_block_size1558021
Ref: sysvar_query_cache_limit1559514
Ref: sysvar_query_cache_min_res_unit1560643
Ref: sysvar_query_cache_size1561992
Ref: sysvar_query_cache_type1563841
Ref: sysvar_query_cache_wlock_invalidate1565747
Ref: sysvar_query_prealloc_size1566901
Ref: sysvar_rand_seed11568530
Ref: sysvar_rand_seed21569192
Ref: sysvar_range_alloc_block_size1569256
Ref: sysvar_read_buffer_size1570602
Ref: sysvar_read_only1572408
Ref: sysvar_read_rnd_buffer_size1575880
Ref: sysvar_relay_log_purge1577344
Ref: sysvar_relay_log_space_limit1578049
Ref: sysvar_report_host1579156
Ref: sysvar_report_password1579714
Ref: sysvar_report_port1580370
Ref: sysvar_report_user1581136
Ref: sysvar_rpl_semi_sync_master_enabled1581759
Ref: sysvar_rpl_semi_sync_master_timeout1582529
Ref: sysvar_rpl_semi_sync_master_trace_level1583326
Ref: sysvar_rpl_semi_sync_master_wait_no_slave1584294
Ref: sysvar_rpl_semi_sync_slave_enabled1585822
Ref: sysvar_rpl_semi_sync_slave_trace_level1586587
Ref: sysvar_secure_auth1587303
Ref: sysvar_secure_file_priv1588481
Ref: sysvar_server_id1589302
Ref: sysvar_shared_memory1590229
Ref: sysvar_shared_memory_base_name1590588
Ref: sysvar_skip_external_locking1591137
Ref: sysvar_skip_name_resolve1592320
Ref: sysvar_skip_networking1593304
Ref: sysvar_skip_show_database1593973
Ref: sysvar_slow_launch_time1595229
Ref: sysvar_slow_query_log1595935
Ref: sysvar_slow_query_log_file1596995
Ref: sysvar_socket1597763
Ref: sysvar_sort_buffer_size1598769
Ref: sysvar_sql_auto_is_null1601228
Ref: sysvar_sql_big_selects1603071
Ref: sysvar_sql_buffer_result1604098
Ref: sysvar_sql_log_bin1604867
Ref: sysvar_sql_log_off1605699
Ref: sysvar_sql_log_update1606461
Ref: sysvar_sql_mode1607109
Ref: sysvar_sql_notes1609026
Ref: sysvar_sql_quote_show_create1609486
Ref: sysvar_sql_safe_updates1609921
Ref: sysvar_sql_select_limit1610347
Ref: sysvar_sql_warnings1611257
Ref: sysvar_ssl_ca1611492
Ref: sysvar_ssl_capath1612073
Ref: sysvar_ssl_cert1612711
Ref: sysvar_ssl_cipher1613338
Ref: sysvar_ssl_key1613945
Ref: sysvar_storage_engine1614516
Ref: sysvar_stored_program_cache1615682
Ref: sysvar_sync_frm1617292
Ref: sysvar_system_time_zone1618038
Ref: sysvar_table_definition_cache1619138
Ref: sysvar_table_lock_wait_timeout1620100
Ref: sysvar_table_open_cache1620895
Ref: sysvar_table_type1622031
Ref: sysvar_thread_cache_size1622134
Ref: sysvar_thread_concurrency1623755
Ref: sysvar_thread_handling1624819
Ref: sysvar_thread_pool_algorithm1626429
Ref: sysvar_thread_pool_high_priority_connection1627905
Ref: sysvar_thread_pool_max_unused_threads1629179
Ref: sysvar_thread_pool_prio_kickup_timer1631058
Ref: sysvar_thread_pool_size1632289
Ref: sysvar_thread_pool_stall_limit1633555
Ref: sysvar_thread_stack1635157
Ref: sysvar_time_format1636786
Ref: sysvar_time_zone1636838
Ref: sysvar_timed_mutexes1637604
Ref: sysvar_timestamp1638605
Ref: sysvar_tmp_table_size1639236
Ref: sysvar_tmpdir1640831
Ref: sysvar_transaction_alloc_block_size1642508
Ref: sysvar_transaction_prealloc_size1643963
Ref: sysvar_tx_isolation1645875
Ref: sysvar_unique_checks1647230
Ref: sysvar_updatable_views_with_limit1648277
Ref: sysvar_version1649603
Ref: sysvar_version_comment1649947
Ref: sysvar_version_compile_machine1650561
Ref: sysvar_version_compile_os1651025
Ref: sysvar_wait_timeout1651467
Ref: sysvar_warning_count1652880
Node: using-system-variables1653074
Node: structured-system-variables1665378
Node: dynamic-system-variables1670553
Node: server-status-variables1691852
Ref: statvar_Aborted_clients1727262
Ref: statvar_Aborted_connects1727446
Ref: statvar_Binlog_cache_disk_use1727580
Ref: statvar_Binlog_cache_use1728155
Ref: statvar_Binlog_stmt_cache_disk_use1728246
Ref: statvar_Binlog_stmt_cache_use1728493
Ref: statvar_Bytes_received1728619
Ref: statvar_Bytes_sent1728696
Ref: statvar_Com_xxx1728763
Ref: statvar_Compression1731208
Ref: statvar_Connections1731318
Ref: statvar_Created_tmp_disk_tables1731425
Ref: statvar_Created_tmp_files1732392
Ref: statvar_Created_tmp_tables1732487
Ref: statvar_Delayed_errors1733079
Ref: statvar_Delayed_insert_threads1733249
Ref: statvar_Delayed_writes1733371
Ref: statvar_Flush_commands1733475
Ref: statvar_Handler_commit1733931
Ref: statvar_Handler_delete1734021
Ref: statvar_Handler_prepare1734112
Ref: statvar_Handler_read_first1734207
Ref: statvar_Handler_read_key1734471
Ref: statvar_Handler_read_last1734669
Ref: statvar_Handler_read_next1735037
Ref: statvar_Handler_read_prev1735259
Ref: statvar_Handler_read_rnd1735424
Ref: statvar_Handler_read_rnd_next1735754
Ref: statvar_Handler_rollback1736077
Ref: statvar_Handler_savepoint1736191
Ref: statvar_Handler_savepoint_rollback1736290
Ref: statvar_Handler_update1736410
Ref: statvar_Handler_write1736491
Ref: statvar_Innodb_buffer_pool_bytes_data1736571
Ref: statvar_Innodb_buffer_pool_pages_data1736922
Ref: statvar_Innodb_buffer_pool_bytes_dirty1737021
Ref: statvar_Innodb_buffer_pool_pages_dirty1737332
Ref: statvar_Innodb_buffer_pool_pages_flushed1737415
Ref: statvar_Innodb_buffer_pool_pages_free1737510
Ref: statvar_Innodb_buffer_pool_pages_latched1737581
Ref: statvar_Innodb_buffer_pool_pages_misc1737940
Ref: statvar_Innodb_buffer_pool_pages_total1738285
Ref: statvar_Innodb_buffer_pool_read_ahead1738376
Ref: statvar_Innodb_buffer_pool_read_ahead_evicted1738518
Ref: statvar_Innodb_buffer_pool_read_requests1738744
Ref: statvar_Innodb_buffer_pool_reads1738847
Ref: statvar_Innodb_buffer_pool_wait_free1739014
Ref: statvar_Innodb_buffer_pool_write_requests1739422
Ref: statvar_Innodb_data_fsyncs1739523
Ref: statvar_Innodb_data_pending_fsyncs1739600
Ref: statvar_Innodb_data_pending_reads1739694
Ref: statvar_Innodb_data_pending_writes1739772
Ref: statvar_Innodb_data_read1739852
Ref: statvar_Innodb_data_reads1739938
Ref: statvar_Innodb_data_writes1740003
Ref: statvar_Innodb_data_written1740070
Ref: statvar_Innodb_dblwr_pages_written1740150
Ref: statvar_Innodb_dblwr_writes1740296
Ref: statvar_Innodb_have_atomic_builtins1740427
Ref: statvar_Innodb_log_waits1740535
Ref: statvar_Innodb_log_write_requests1740690
Ref: statvar_Innodb_log_writes1740765
Ref: statvar_Innodb_os_log_fsyncs1740845
Ref: statvar_Innodb_os_log_pending_fsyncs1740934
Ref: statvar_Innodb_os_log_pending_writes1741031
Ref: statvar_Innodb_os_log_written1741114
Ref: statvar_Innodb_page_size1741196
Ref: statvar_Innodb_pages_created1741383
Ref: statvar_Innodb_pages_read1741448
Ref: statvar_Innodb_pages_written1741507
Ref: statvar_Innodb_row_lock_current_waits1741572
Ref: statvar_Innodb_row_lock_time1741669
Ref: statvar_Innodb_row_lock_time_avg1741767
Ref: statvar_Innodb_row_lock_time_max1741864
Ref: statvar_Innodb_row_lock_waits1741961
Ref: statvar_Innodb_rows_deleted1742051
Ref: statvar_Innodb_rows_inserted1742135
Ref: statvar_Innodb_rows_read1742221
Ref: statvar_Innodb_rows_updated1742299
Ref: statvar_Innodb_truncated_status_writes1742381
Ref: statvar_Key_blocks_not_flushed1742701
Ref: statvar_Key_blocks_unused1742843
Ref: statvar_Key_blocks_used1743081
Ref: statvar_Key_read_requests1743282
Ref: statvar_Key_reads1743374
Ref: statvar_Key_write_requests1743625
Ref: statvar_Key_writes1743717
Ref: statvar_Last_query_cost1743797
Ref: statvar_Max_used_connections1744358
Ref: statvar_Not_flushed_delayed_rows1744496
Ref: statvar_Open_files1744633
Ref: statvar_Open_streams1744983
Ref: statvar_Open_table_definitions1745074
Ref: statvar_Open_tables1745147
Ref: statvar_Opened_files1745210
Ref: statvar_Opened_table_definitions1745429
Ref: statvar_Opened_tables1745519
Ref: statvar_Prepared_stmt_count1745945
Ref: statvar_Qcache_free_blocks1746127
Ref: statvar_Qcache_free_memory1746214
Ref: statvar_Qcache_hits1746295
Ref: statvar_Qcache_inserts1746354
Ref: statvar_Qcache_lowmem_prunes1746432
Ref: statvar_Qcache_not_cached1746557
Ref: statvar_Qcache_queries_in_cache1746697
Ref: statvar_Qcache_total_blocks1746789
Ref: statvar_Queries1746871
Ref: statvar_Questions1747117
Ref: statvar_Rpl_semi_sync_master_clients1747481
Ref: statvar_Rpl_semi_sync_master_net_avg_wait_time1747674
Ref: statvar_Rpl_semi_sync_master_net_wait_time1747914
Ref: statvar_Rpl_semi_sync_master_net_waits1748143
Ref: statvar_Rpl_semi_sync_master_no_times1748363
Ref: statvar_Rpl_semi_sync_master_no_tx1748595
Ref: statvar_Rpl_semi_sync_master_status1748827
Ref: statvar_Rpl_semi_sync_master_timefunc_failures1749305
Ref: statvar_Rpl_semi_sync_master_tx_avg_wait_time1749567
Ref: statvar_Rpl_semi_sync_master_tx_wait_time1749809
Ref: statvar_Rpl_semi_sync_master_tx_waits1750036
Ref: statvar_Rpl_semi_sync_master_wait_pos_backtraverse1750254
Ref: statvar_Rpl_semi_sync_master_wait_sessions1750718
Ref: statvar_Rpl_semi_sync_master_yes_tx1750939
Ref: statvar_Rpl_semi_sync_slave_status1751168
Ref: statvar_Rpl_status1751503
Ref: statvar_Select_full_join1751642
Ref: statvar_Select_full_range_join1751841
Ref: statvar_Select_range1751946
Ref: statvar_Select_range_check1752108
Ref: statvar_Select_scan1752299
Ref: statvar_Slave_heartbeat_period1752387
Ref: statvar_Slave_open_temp_tables1752508
Ref: statvar_Slave_received_heartbeats1752752
Ref: statvar_Slave_retried_transactions1753026
Ref: statvar_Slave_running1753177
Ref: statvar_Slow_launch_threads1753380
Ref: statvar_Slow_queries1753506
Ref: statvar_Sort_merge_passes1753761
Ref: statvar_Sort_range1753978
Ref: statvar_Sort_rows1754053
Ref: statvar_Sort_scan1754105
Ref: statvar_Ssl_accept_renegotiates1754188
Ref: statvar_Ssl_accepts1754288
Ref: statvar_Ssl_callback_cache_hits1754355
Ref: statvar_Ssl_cipher1754429
Ref: statvar_Ssl_cipher_list1754511
Ref: statvar_Ssl_client_connects1754576
Ref: statvar_Ssl_connect_renegotiates1754675
Ref: statvar_Ssl_ctx_verify_depth1754806
Ref: statvar_Ssl_ctx_verify_mode1754931
Ref: statvar_Ssl_default_timeout1755001
Ref: statvar_Ssl_finished_accepts1755061
Ref: statvar_Ssl_finished_connects1755153
Ref: statvar_Ssl_session_cache_hits1755264
Ref: statvar_Ssl_session_cache_misses1755340
Ref: statvar_Ssl_session_cache_mode1755420
Ref: statvar_Ssl_session_cache_overflows1755486
Ref: statvar_Ssl_session_cache_size1755572
Ref: statvar_Ssl_session_cache_timeouts1755638
Ref: statvar_Ssl_sessions_reused1755722
Ref: statvar_Ssl_used_session_cache_entries1755810
Ref: statvar_Ssl_verify_depth1755902
Ref: statvar_Ssl_verify_mode1755990
Ref: statvar_Ssl_version1756076
Ref: statvar_Table_locks_immediate1756127
Ref: statvar_Table_locks_waited1756251
Ref: statvar_Tc_log_max_pages_used1756562
Ref: statvar_Tc_log_page_size1757408
Ref: statvar_Tc_log_page_waits1757688
Ref: statvar_Threads_cached1758257
Ref: statvar_Threads_connected1758330
Ref: statvar_Threads_created1758405
Ref: statvar_Threads_running1758663
Ref: statvar_Uptime1758739
Ref: statvar_Uptime_since_flush_status1758812
Node: server-sql-mode1758923
Ref: sql-mode-important1761808
Ref: sql-mode-full1763184
Ref: sqlmode_allow_invalid_dates1763268
Ref: sqlmode_ansi_quotes1764227
Ref: sqlmode_error_for_division_by_zero1764594
Ref: sqlmode_high_not_precedence1765203
Ref: sqlmode_ignore_space1765815
Ref: sqlmode_no_auto_create_user1766834
Ref: sqlmode_no_auto_value_on_zero1767170
Ref: sqlmode_no_backslash_escapes1768187
Ref: sqlmode_no_dir_in_create1768403
Ref: sqlmode_no_engine_substitution1768582
Ref: sqlmode_no_field_options1769390
Ref: sqlmode_no_key_options1769610
Ref: sqlmode_no_table_options1769827
Ref: sqlmode_no_unsigned_subtraction1770065
Ref: sqlmode_no_zero_date1772174
Ref: sqlmode_no_zero_in_date1772406
Ref: sqlmode_only_full_group_by1772809
Ref: sqlmode_pad_char_to_full_length1774308
Ref: sqlmode_pipes_as_concat1775679
Ref: sqlmode_real_as_float1775817
Ref: sqlmode_strict_all_tables1776073
Ref: sqlmode_strict_trans_tables1776216
Ref: sql-mode-combo1779197
Ref: sqlmode_ansi1779563
Ref: sqlmode_db21780358
Ref: sqlmode_maxdb1780504
Ref: sqlmode_mssql1780680
Ref: sqlmode_mysql3231780828
Ref: sqlmode_mysql401780909
Ref: sqlmode_oracle1780989
Ref: sqlmode_postgresql1781166
Ref: sqlmode_traditional1781319
Node: server-plugins1781527
Node: server-plugin-loading1782171
Ref: server-plugin-installing1782728
Ref: server-plugin-activating1786927
Ref: server-plugin-uninstalling1790929
Node: obtaining-plugin-information1792250
Node: ipv6-support1795053
Node: ipv6-system-support1796982
Node: ipv6-server-config1798343
Node: ipv6-local-connections1800551
Node: ipv6-remote-connections1802625
Node: ipv6-brokers1805243
Node: server-side-help-support1807753
Node: server-signal-response1809431
Node: server-shutdown1811275
Node: server-logs1815528
Node: log-destinations1818389
Node: error-log1826423
Node: query-log1832451
Node: binary-log1836500
Node: binary-log-formats1850028
Node: binary-log-setting1852081
Node: binary-log-mixed1857245
Node: binary-log-mysql-database1880811
Node: slow-query-log1882543
Node: log-file-maintenance1887492
Node: multiple-servers1892098
Node: multiple-data-directories1897313
Node: multiple-windows-servers1901087
Node: multiple-windows-command-line-servers1902076
Node: multiple-windows-services1905117
Node: multiple-unix-servers1909466
Node: multiple-server-clients1913413
Node: dba-dtrace-server1916199
Ref: figure-dtrace-server-overview1917388
Node: dba-dtrace-mysqld-ref1918655
Node: dba-dtrace-ref-connection1921951
Node: dba-dtrace-ref-command1925608
Node: dba-dtrace-ref-query1929220
Node: dba-dtrace-ref-query-parsing1931997
Node: dba-dtrace-ref-querycache1934030
Node: dba-dtrace-ref-queryexec1936982
Node: dba-dtrace-ref-rowlevel1939459
Node: dba-dtrace-ref-readrow1943272
Node: dba-dtrace-ref-index1944499
Node: dba-dtrace-ref-lock1945257
Node: dba-dtrace-ref-filesort1949303
Node: dba-dtrace-ref-statement1952174
Node: dba-dtrace-ref-network1960323
Node: dba-dtrace-ref-keycache1964120
Node: security1967618
Node: general-security-issues1969574
Node: security-guidelines1970659
Node: password-security1976031
Node: password-security-user1976886
Node: password-security-admin1981774
Node: password-logging1982644
Node: password-hashing1984131
Node: application-password-use2002372
Node: security-against-attack2003846
Node: security-options2011041
Node: changing-mysql-user2013498
Node: load-data-local2015858
Node: secure-client-programming2019270
Node: privilege-system2023828
Node: privileges-provided2028418
Ref: priv_all2033067
Ref: priv_alter2033368
Ref: priv_alter-routine2033700
Ref: priv_create2033813
Ref: priv_create-routine2033894
Ref: priv_create-tablespace2034001
Ref: priv_create-temporary-tables2034116
Ref: priv_create-user2034967
Ref: priv_create-view2035168
Ref: priv_delete2035257
Ref: priv_drop2035346
Ref: priv_event2035828
Ref: priv_execute2035937
Ref: priv_file2036040
Ref: priv_grant-option2037046
Ref: priv_index2037198
Ref: priv_insert2037463
Ref: priv_lock-tables2037746
Ref: priv_process2038026
Ref: priv_proxy2038436
Ref: priv_references2038604
Ref: priv_reload2038659
Ref: priv_replication-client2039474
Ref: priv_replication-slave2039762
Ref: priv_select2040041
Ref: priv_show-databases2040941
Ref: priv_show-view2041354
Ref: priv_shutdown2041451
Ref: priv_super2041604
Ref: priv_trigger2042641
Ref: priv_update2042804
Ref: priv_usage2042891
Node: grant-table-structure2044786
Node: account-names2060931
Node: connection-access2067692
Node: request-access2076457
Node: privilege-changes2085115
Node: access-denied2087428
Node: user-account-management2105895
Node: user-names2107323
Node: adding-users2114048
Node: removing-users2126043
Node: user-resources2126333
Node: assigning-passwords2133832
Node: pluggable-authentication2139239
Node: authentication-plugin-use2145093
Node: native-authentication-plugin2150194
Node: old-native-authentication-plugin2152317
Node: pam-authentication-plugin2154563
Node: pam-authentication-plugin-installation2157989
Node: pam-authentication-plugin-usage2159217
Node: pam-authentication-unix-without-proxy2166877
Node: pam-authentication-ldap-without-proxy2168876
Node: pam-authentication-unix-with-proxy2170009
Node: pam-authentication-plugin-debugging2174926
Node: windows-authentication-plugin2179909
Node: windows-authentication-plugin-installation2183394
Node: windows-authentication-plugin-usage2184557
Node: cleartext-authentication-plugin2193740
Node: socket-authentication-plugin2196635
Node: test-authentication-plugin2199270
Node: proxy-users2200944
Node: ssl-connections2211946
Node: ssl-basics2213610
Node: configuring-for-ssl2215864
Node: using-ssl-connections2218481
Node: ssl-options2222765
Ref: option_general_ssl2224909
Ref: option_general_ssl-ca2227106
Ref: option_general_ssl-capath2227717
Ref: option_general_ssl-cert2228982
Ref: option_general_ssl-cipher2229148
Ref: option_general_ssl-key2229925
Ref: option_general_ssl-verify-server-cert2230511
Node: creating-ssl-certs2231007
Node: windows-and-ssh2244822
Node: audit-log-plugin2246560
Node: audit-log-plugin-installation2249473
Node: audit-log-security2251938
Node: audit-log-file2252636
Node: audit-log-plugin-logging-control2261544
Node: audit-log-plugin-options-variables2268415
Ref: option_mysqld_audit-log2269116
Ref: sysvar_audit_log_buffer_size2271096
Ref: sysvar_audit_log_file2272668
Ref: sysvar_audit_log_flush2273625
Ref: sysvar_audit_log_policy2274534
Ref: sysvar_audit_log_rotate_on_size2275708
Ref: sysvar_audit_log_strategy2277089
Node: audit-log-plugin-restrictions2278465
Node: account-activity-auditing2278966
Node: backup-and-recovery2284084
Node: backup-types2287240
Node: backup-methods2297882
Node: backup-strategy-example2304646
Node: backup-policy2308146
Node: recovery-from-backups2315515
Node: backup-strategy-summary2317547
Node: using-mysqldump2318593
Node: mysqldump-sql-format2320737
Node: reloading-sql-format-dumps2323795
Node: mysqldump-delimited-text2325103
Node: reloading-delimited-text-dumps2329371
Node: mysqldump-tips2330983
Node: mysqldump-copying-database2331871
Node: mysqldump-copying-to-other-server2332416
Node: mysqldump-stored-programs2333669
Node: mysqldump-definition-data-dumps2334539
Node: mysqldump-upgrade-testing2335559
Node: point-in-time-recovery2336915
Node: point-in-time-recovery-times2341669
Node: point-in-time-recovery-positions2343817
Node: myisam-table-maintenance2346169
Node: myisam-crash-recovery2348855
Node: myisam-check2352492
Node: myisam-repair2354345
Node: myisam-optimization2362043
Node: myisam-maintenance-schedule2363690
Node: optimization2366191
Node: optimize-overview2367768
Ref: portability2372874
Node: statement-optimization2373189
Node: select-optimization2374168
Node: select-speed2378498
Node: where-optimizations2379128
Node: range-optimization2384155
Node: range-access-single-part2384829
Node: range-access-multi-part2389303
Node: index-merge-optimization2394587
Node: index-merge-intersection2397447
Node: index-merge-union2399100
Node: index-merge-sort-union2400155
Node: condition-pushdown-optimization2400917
Node: is-null-optimization2405774
Node: left-join-optimization2407929
Node: nested-loop-joins2410914
Node: nested-join-optimization2414631
Node: outer-join-simplification2428365
Node: order-by-optimization2434132
Node: group-by-optimization2443980
Node: loose-index-scan2445564
Node: tight-index-scan2450269
Node: distinct-optimization2452383
Node: subquery-optimization-with-exists2453907
Node: limit-optimization2466327
Node: how-to-avoid-table-scan2468664
Node: non-select-optimization2472990
Node: insert-speed2474171
Node: update-speed2476363
Node: delete-speed2477262
Node: permission-optimization2477985
Node: information-schema-optimization2478883
Node: miscellaneous-optimization-tips2494423
Node: optimization-indexes2496946
Node: mysql-indexes2498299
Node: optimizing-primary-keys2502269
Node: optimizing-foreign-keys2503202
Node: column-indexes2504159
Node: multiple-column-indexes2506644
Node: verifying-index-usage2510699
Node: myisam-index-statistics2511081
Node: index-btree-hash2517260
Node: optimizing-database-structure2521542
Node: data-size2522403
Node: optimize-data-types2529446
Node: optimize-numeric2529912
Node: optimize-character2530868
Node: optimize-blob2532931
Node: procedure-analyse2534655
Node: optimize-multi-tables2536219
Node: table-cache2536895
Node: creating-many-tables2542285
Node: internal-temporary-tables2542963
Node: optimizing-innodb2545801
Node: optimizing-innodb-storage-layout2547079
Node: optimizing-innodb-transaction-management2550002
Node: optimizing-innodb-logging2554649
Node: optimizing-innodb-bulk-data-loading2555366
Node: optimizing-innodb-queries2557644
Node: optimizing-innodb-ddl-operations2559517
Node: optimizing-innodb-diskio2560970
Node: optimizing-innodb-configuration-variables2564012
Node: optimizing-innodb-many-tables2569850
Node: optimizing-myisam2570584
Node: optimizing-queries-myisam2571305
Node: optimizing-myisam-bulk-data-loading2577416
Node: repair-table-speed2582753
Node: optimizing-memory-tables2587685
Node: execution-plan-information2589040
Node: using-explain2590367
Node: explain-output2592541
Ref: explain-output-columns2594110
Ref: explain-output-column-table2594522
Ref: explain_id2595142
Ref: explain_select_type2595532
Ref: explain_table2597736
Ref: explain_partitions2598174
Ref: explain_type2598425
Ref: explain_possible_keys2598532
Ref: explain_key2599411
Ref: explain_key_len2600976
Ref: explain_ref2601265
Ref: explain_rows2601422
Ref: explain_filtered2601666
Ref: explain_extra2602070
Ref: explain-join-types2602251
Ref: jointype_system2602456
Ref: jointype_const2602577
Ref: jointype_eq_ref2603222
Ref: jointype_ref2604122
Ref: jointype_fulltext2605061
Ref: jointype_ref_or_null2605133
Ref: jointype_index_merge2605589
Ref: jointype_unique_subquery2605923
Ref: jointype_index_subquery2606230
Ref: jointype_range2606493
Ref: jointype_index2607287
Ref: jointype_all2608076
Ref: explain-extra-information2608469
Ref: explain-output-interpretation2617334
Node: explain-extended2624364
Node: estimating-performance2628146
Node: controlling-optimizer2629981
Node: controlling-query-plan-evaluation2630475
Node: switchable-optimizations2633532
Node: buffering-caching2638168
Node: innodb-buffer-pool2638938
Node: myisam-key-cache2648858
Node: shared-key-cache2652734
Node: multiple-key-caches2653561
Node: midpoint-insertion2659060
Node: index-preloading2661607
Node: key-cache-block-size2663416
Node: key-cache-restructuring2664339
Node: query-cache2665718
Node: query-cache-operation2670299
Node: query-cache-in-select2675427
Node: query-cache-configuration2676415
Node: query-cache-status-and-maintenance2683293
Node: locking-issues2686136
Node: internal-locking2687502
Node: table-locking2694085
Node: concurrent-inserts2699823
Node: metadata-locking2702808
Node: external-locking2705822
Node: optimizing-the-server2710406
Node: system-optimization2711452
Node: server-parameters2714036
Node: disk-issues2740543
Node: symbolic-links2745231
Node: symbolic-links-to-databases2746190
Node: symbolic-links-to-tables2747279
Node: windows-symbolic-links2751720
Node: optimizing-memory2755273
Node: memory-use2755580
Node: large-page-support2761340
Node: optimizing-network2766331
Node: connection-threads2766686
Node: host-cache2770350
Node: thread-pool-plugin2774204
Node: thread-pool-installation2776562
Node: thread-pool-operation2780692
Node: thread-pool-tuning2790305
Node: optimize-benchmarking2796207
Node: select-benchmarking2798331
Node: mysql-benchmarks2799515
Node: custom-benchmarks2801934
Node: monitoring-performance-schema2803958
Node: thread-information2804434
Node: thread-commands2807497
Node: general-thread-states2810085
Node: delayed-insert-thread-states2824881
Node: query-cache-thread-states2827926
Node: master-thread-states2829322
Node: slave-io-thread-states2830657
Node: slave-sql-thread-states2833889
Node: slave-connection-thread-states2835243
Node: mysql-cluster-thread-states2836135
Node: event-scheduler-thread-states2837221
Node: language-structure2838173
Node: literals2838921
Node: string-literals2839705
Ref: character-escape-sequences2842243
Node: number-literals2846633
Node: date-and-time-literals2847254
Ref: date-and-time-standard-sql-literals2847988
Ref: date-and-time-string-numeric-literals2848518
Node: hexadecimal-literals2854639
Node: boolean-literals2856261
Node: bit-field-literals2856624
Node: null-values2858195
Node: identifiers2858821
Node: identifier-qualifiers2864784
Node: identifier-case-sensitivity2867202
Node: identifier-mapping2874544
Node: function-resolution2881394
Node: reserved-words2891754
Ref: table-reserved-words-5.5.352894029
Ref: table-reserved-words-new-5.52898601
Node: user-variables2899169
Node: expressions2907186
Node: comments2911154
Node: globalization2914011
Node: charset2915101
Node: charset-general2917584
Node: charset-mysql2920275
Node: charset-syntax2925727
Node: charset-server2927426
Node: charset-database2929581
Node: charset-table2932064
Node: charset-column2933724
Node: charset-literal2937070
Node: charset-national2941835
Node: charset-examples2942892
Node: charset-compatibility2945187
Node: charset-connection2945523
Node: charset-applications2955149
Node: charset-errors2961050
Node: charset-collations2965149
Node: charset-collation-names2965992
Node: charset-collate2966481
Node: charset-collate-precedence2967817
Node: charset-collation-charset2968189
Node: charset-collation-expressions2968859
Node: charset-binary-collations2973144
Node: charset-binary-op2978934
Node: charset-collation-effect2981073
Node: charset-collation-information-schema2984358
Node: charset-repertoire2989337
Node: charset-operations2994263
Node: charset-result2994758
Node: charset-convert2997754
Node: charset-show2999240
Node: charset-unicode3004286
Node: charset-unicode-ucs23009565
Node: charset-unicode-utf163010325
Node: charset-unicode-utf323012929
Node: charset-unicode-utf83014581
Node: charset-unicode-utf8mb33016121
Node: charset-unicode-utf8mb43017787
Node: charset-unicode-upgrading3019565
Node: charset-metadata3026837
Node: charset-conversion3031021
Node: charset-charsets3035093
Node: charset-unicode-sets3039711
Node: charset-we-sets3050629
Node: charset-ce-sets3054375
Node: charset-se-me-sets3055966
Node: charset-baltic-sets3057568
Node: charset-cyrillic-sets3058394
Node: charset-asian-sets3059643
Node: charset-cp9323062082
Node: error-message-language3068890
Node: adding-character-set3072014
Node: character-arrays3078650
Node: string-collating3081818
Node: multi-byte-characters3082862
Node: adding-collation3083733
Node: charset-collation-implementations3086802
Node: adding-collation-choosing-id3090891
Node: adding-collation-simple-8bit3092989
Node: adding-collation-unicode-uca3096815
Node: ldml-collation-example3098320
Node: ldml-rules3104238
Node: charset-configuration3107061
Node: time-zone-support3110358
Node: time-zone-upgrades3117974
Node: time-zone-leap-seconds3123499
Node: locale-support3126612
Node: data-types3134075
Node: data-type-overview3136013
Node: numeric-type-overview3136348
Node: date-and-time-type-overview3147286
Node: string-type-overview3152342
Node: numeric-types3164304
Node: integer-types3166655
Node: fixed-point-types3168075
Node: floating-point-types3170095
Node: bit-type3171869
Node: numeric-type-attributes3172635
Node: out-of-range-and-overflow3175725
Node: date-and-time-types3180340
Node: datetime3185926
Node: time3190647
Node: year3192870
Node: migrating-to-year43194953
Node: timestamp-initialization3200099
Node: fractional-seconds3210240
Node: date-and-time-type-conversion3211105
Node: two-digit-years3214395
Node: string-types3215907
Node: char3216729
Node: binary-varbinary3222707
Node: blob3226786
Node: enum3232309
Ref: enum-using3233353
Ref: enum-indexes3234238
Ref: enum-literals3235988
Ref: enum-nulls3238095
Ref: enum-sorting3239017
Ref: enum-limits3239675
Node: set3240967
Node: data-type-defaults3247071
Node: storage-requirements3250789
Ref: data-types-storage-reqs-date-time3256820
Node: choosing-types3263039
Node: other-vendor-data-types3264255
Node: functions3266977
Node: func-op-summary-ref3270268
Node: type-conversion3289670
Node: non-typed-operators3298670
Node: operator-precedence3301447
Node: comparison-operators3303254
Ref: operator_equal3306209
Ref: operator_equal-to3306522
Ref: operator_not-equal3306940
Ref: operator_less-than-or-equal3307168
Ref: operator_less-than3307264
Ref: operator_greater-than-or-equal3307347
Ref: operator_greater-than3307444
Ref: operator_is3307530
Ref: operator_is-not3307758
Ref: operator_is-null3308007
Ref: operator_is-not-null3309923
Ref: operator_between3310089
Ref: operator_not-between3311387
Ref: function_coalesce3311485
Ref: function_greatest3311760
Ref: function_in3312231
Ref: function_not-in3313812
Ref: function_isnull3313900
Ref: function_interval3314412
Ref: function_least3314956
Node: logical-operators3316503
Ref: operator_not3317452
Ref: operator_and3317979
Ref: operator_or3318446
Ref: operator_xor3319033
Node: assignment-operators3319547
Ref: operator_assign-value3320086
Ref: operator_assign-equal3322147
Node: control-flow-functions3323898
Ref: operator_case3324354
Ref: function_if3325873
Ref: function_ifnull3327263
Ref: function_nullif3328631
Node: string-functions3329016
Ref: function_ascii3334515
Ref: function_bin3334952
Ref: function_bit-length3335237
Ref: function_char3335383
Ref: function_char-length3337321
Ref: function_character-length3337609
Ref: function_concat3337701
Ref: function_concat-ws3338784
Ref: function_elt3339567
Ref: function_export-set3340017
Ref: function_field3340923
Ref: function_find-in-set3341639
Ref: function_format3342364
Ref: function_hex3343295
Ref: function_insert3344056
Ref: function_instr3344790
Ref: function_lcase3345286
Ref: function_left3345350
Ref: function_length3345594
Ref: function_load-file3345932
Ref: function_locate3346829
Ref: function_lower3347506
Ref: function_lpad3348522
Ref: function_ltrim3348874
Ref: function_make-set3349076
Ref: function_mid3349761
Ref: function_oct3349855
Ref: function_octet-length3350137
Ref: function_ord3350216
Ref: function_position3350726
Ref: function_quote3350830
Ref: function_repeat3351574
Ref: function_replace3351862
Ref: function_reverse3352230
Ref: function_right3352432
Ref: function_rpad3352678
Ref: function_rtrim3353070
Ref: function_soundex3353274
Ref: operator_sounds-like3354837
Ref: function_space3354931
Ref: function_substr3355071
Ref: function_substring3355229
Ref: function_substring-index3356656
Ref: function_trim3357349
Ref: function_ucase3358058
Ref: function_unhex3358122
Ref: function_upper3359941
Node: string-comparison-functions3360562
Ref: operator_like3361330
Ref: operator_not-like3367035
Ref: function_strcmp3368101
Node: regexp3369895
Ref: operator_not-regexp3371006
Ref: operator_regexp3371108
Node: numeric-functions3384805
Node: arithmetic-functions3387853
Ref: operator_plus3390285
Ref: operator_minus3390365
Ref: operator_unary-minus3390449
Ref: operator_times3390825
Ref: operator_divide3391338
Ref: operator_div3391696
Ref: operator_mod3392341
Node: mathematical-functions3392539
Ref: function_abs3395152
Ref: function_acos3395405
Ref: function_asin3395744
Ref: function_atan3396563
Ref: function_atan23396803
Ref: function_ceil3397210
Ref: function_ceiling3397272
Ref: function_conv3397662
Ref: function_cos3398500
Ref: function_cot3398636
Ref: function_crc323398816
Ref: function_degrees3399219
Ref: function_exp3399436
Ref: function_floor3399830
Ref: function_ln3400701
Ref: function_log3401101
Ref: function_log23401950
Ref: function_log103402295
Ref: function_mod3402597
Ref: function_pi3403229
Ref: function_pow3403559
Ref: function_power3403751
Ref: function_radians3403808
Ref: function_rand3404016
Ref: function_round3407659
Ref: function_sign3410073
Ref: function_sin3410385
Ref: function_sqrt3410601
Ref: function_tan3410864
Ref: function_truncate3411093
Node: date-and-time-functions3411798
Ref: function_adddate3419212
Ref: function_addtime3419969
Ref: function_convert-tz3420381
Ref: function_curdate3421397
Ref: function_current-date3421721
Ref: function_current-time3421833
Ref: function_current-timestamp3421945
Ref: function_curtime3422078
Ref: function_date3422462
Ref: function_datediff3422640
Ref: function_date-add3423091
Ref: function_date-format3430616
Ref: function_date-sub3434466
Ref: function_day3434553
Ref: function_dayname3434619
Ref: function_dayofmonth3434903
Ref: function_dayofweek3435169
Ref: function_dayofyear3435421
Ref: function_extract3435591
Ref: function_from-days3436227
Ref: function_from-unixtime3436582
Ref: function_get-format3437913
Ref: function_hour3439882
Ref: function_last-day3440275
Ref: function_localtime3440786
Ref: function_localtimestamp3440882
Ref: function_makedate3440998
Ref: function_maketime3441444
Ref: function_microsecond3441647
Ref: function_minute3441975
Ref: function_month3442137
Ref: function_monthname3442408
Ref: function_now3442699
Ref: function_period-add3444834
Ref: function_period-diff3445107
Ref: function_quarter3445402
Ref: function_second3445569
Ref: function_sec-to-time3445720
Ref: function_str-to-date3446190
Ref: function_subdate3448952
Ref: function_subtime3449718
Ref: function_sysdate3450163
Ref: function_time3452353
Ref: function_timediff3452863
Ref: function_timestamp3453634
Ref: function_timestampadd3454154
Ref: function_timestampdiff3455038
Ref: function_time-format3456053
Ref: function_time-to-sec3456669
Ref: function_to-days3456903
Ref: function_to-seconds3459139
Ref: function_unix-timestamp3461590
Ref: function_utc-date3464451
Ref: function_utc-time3464750
Ref: function_utc-timestamp3465055
Ref: function_week3465427
Ref: function_weekday3468223
Ref: function_weekofyear3468491
Ref: function_year3468770
Ref: function_yearweek3468958
Node: mysql-calendar3469529
Node: fulltext-search3471730
Ref: function_match3472366
Node: fulltext-natural-language3475823
Node: fulltext-boolean3486748
Node: fulltext-query-expansion3493872
Node: fulltext-stopwords3497019
Node: fulltext-restrictions3505825
Node: fulltext-fine-tuning3507833
Node: full-text-adding-collation3515578
Node: cast-functions3519941
Ref: operator_binary3520369
Ref: function_cast3521360
Ref: function_convert3521588
Node: xml-functions3527642
Ref: function_extractvalue3533842
Ref: function_updatexml3539859
Node: bit-functions3559935
Ref: operator_bitwise-or3560609
Ref: operator_bitwise-and3560744
Ref: operator_bitwise-xor3560880
Ref: operator_left-shift3561122
Ref: operator_right-shift3561483
Ref: operator_bitwise-invert3561845
Ref: function_bit-count3561983
Node: encryption-functions3562153
Ref: function_aes-decrypt3567052
Ref: function_aes-encrypt3567263
Ref: function_compress3569398
Ref: function_decode3570883
Ref: function_des-decrypt3571058
Ref: function_des-encrypt3571961
Ref: function_encode3574023
Ref: function_encrypt3574533
Ref: function_md53575397
Ref: function_old-password3576235
Ref: function_password3577016
Ref: function_sha13580238
Ref: function_sha23581307
Ref: function_uncompress3582589
Ref: function_uncompressed-length3583096
Node: information-functions3583321
Ref: function_benchmark3584951
Ref: function_charset3587394
Ref: function_coercibility3587700
Ref: function_collation3588796
Ref: function_connection-id3589042
Ref: function_current-user3589299
Ref: function_database3591888
Ref: function_found-rows3592412
Ref: function_last-insert-id3596456
Ref: function_row-count3604157
Ref: function_schema3607499
Ref: function_session-user3607568
Ref: function_system-user3607642
Ref: function_user3607714
Ref: function_version3608247
Node: miscellaneous-functions3608815
Ref: function_default3610278
Ref: function_get-lock3610679
Ref: function_inet-aton3613618
Ref: function_inet-ntoa3614670
Ref: function_is-free-lock3615149
Ref: function_is-used-lock3615622
Ref: function_master-pos-wait3616040
Ref: function_name-const3617228
Ref: function_release-lock3617903
Ref: function_sleep3618633
Ref: function_uuid3619052
Ref: function_uuid-short3621120
Ref: function_values3622183
Node: group-by-functions-and-modifiers3623053
Node: group-by-functions3623509
Ref: function_avg3626396
Ref: function_bit-and3626762
Ref: function_bit-or3627117
Ref: function_bit-xor3627345
Ref: function_count3627575
Ref: function_count-distinct3628823
Ref: function_group-concat3629338
Ref: function_max3631863
Ref: function_min3632739
Ref: function_std3633615
Ref: function_stddev3633868
Ref: function_stddev-pop3634143
Ref: function_stddev-samp3634420
Ref: function_sum3634607
Ref: function_var-pop3634870
Ref: function_var-samp3635214
Ref: function_variance3635410
Node: group-by-modifiers3635658
Node: group-by-extensions3644703
Node: spatial-extensions3648858
Node: gis-introduction3650750
Node: opengis-geometry-model3653055
Node: gis-geometry-class-hierarchy3654335
Node: gis-class-geometry3656981
Node: gis-class-point3660532
Node: gis-class-curve3661165
Node: gis-class-linestring3662012
Node: gis-class-surface3662699
Node: gis-class-polygon3663422
Node: gis-class-geometrycollection3664649
Node: gis-class-multipoint3665482
Node: gis-class-multicurve3666257
Node: gis-class-multilinestring3667219
Node: gis-class-multisurface3667658
Node: gis-class-multipolygon3668240
Node: supported-spatial-data-formats3669715
Node: gis-wkt-format3670399
Node: gis-wkb-format3672818
Node: creating-a-spatially-enabled-mysql-database3674569
Node: mysql-spatial-datatypes3675307
Node: creating-spatial-values3676295
Node: gis-wkt-functions3676973
Ref: function_geomcollfromtext3677625
Ref: function_geomfromtext3677800
Ref: function_linefromtext3677956
Ref: function_mlinefromtext3678106
Ref: function_mpointfromtext3678267
Ref: function_mpolyfromtext3678419
Ref: function_pointfromtext3678574
Ref: function_polyfromtext3678681
Ref: function_bdmpolyfromtext3679103
Ref: function_bdpolyfromtext3679299
Node: gis-wkb-functions3679484
Ref: function_geomcollfromwkb3680214
Ref: function_geomfromwkb3680387
Ref: function_linefromwkb3680541
Ref: function_mlinefromwkb3680689
Ref: function_mpointfromwkb3680848
Ref: function_mpolyfromwkb3680998
Ref: function_pointfromwkb3681151
Ref: function_polyfromwkb3681257
Ref: function_bdmpolyfromwkb3681665
Ref: function_bdpolyfromwkb3681860
Node: gis-mysql-specific-functions3682044
Ref: function_geometrycollection3682840
Ref: function_linestring3682920
Ref: function_multilinestring3683125
Ref: function_multipoint3683261
Ref: function_multipolygon3683377
Ref: function_point3683513
Ref: function_polygon3683583
Node: creating-spatial-columns3683846
Node: populating-spatial-columns3684814
Node: fetching-spatial-data3687762
Node: spatial-analysis-functions3688687
Node: functions-to-convert-geometries-between-formats3690127
Ref: function_asbinary3690533
Ref: function_astext3690720
Node: geometry-property-functions3691745
Node: general-geometry-property-functions3692853
Ref: function_dimension3693211
Ref: function_envelope3693785
Ref: function_geometrytype3694500
Ref: function_srid3695057
Ref: function_boundary3695802
Ref: function_isempty3695928
Ref: function_issimple3696150
Node: point-property-functions3696489
Ref: function_x3696818
Ref: function_y3697157
Node: linestring-property-functions3697491
Ref: function_endpoint3697896
Ref: function_glength3698366
Ref: function_isclosed3698921
Ref: function_numpoints3700030
Ref: function_pointn3700451
Ref: function_startpoint3700943
Node: multilinestring-property-functions3701425
Node: polygon-property-functions3702954
Ref: function_area3703249
Ref: function_exteriorring3703729
Ref: function_interiorringn3704291
Ref: function_numinteriorrings3704917
Node: multipolygon-property-functions3705442
Ref: function_centroid3706285
Node: geometrycollection-property-functions3707268
Ref: function_geometryn3707564
Ref: function_numgeometries3708118
Node: functions-that-create-new-geometries-from-existing-ones3708598
Node: functions-that-produce-new-geometries3709226
Node: spatial-operators3709898
Ref: function_buffer3710289
Ref: function_convexhull3710450
Ref: function_difference3710560
Ref: function_intersection3710692
Ref: function_symdifference3710829
Ref: function_union3710974
Node: functions-for-testing-spatial-relations-between-geometric-objects3711091
Node: relations-on-geometry-mbr3711812
Ref: function_mbrcontains3712412
Ref: function_mbrdisjoint3713118
Ref: function_mbrequal3713289
Ref: function_mbrintersects3713438
Ref: function_mbroverlaps3713589
Ref: function_mbrtouches3713933
Ref: function_mbrwithin3714281
Node: functions-that-test-spatial-relationships-between-geometries3714980
Ref: function_contains3715709
Ref: function_crosses3715859
Ref: function_disjoint3716486
Ref: function_equals3716612
Ref: function_intersects3716705
Ref: function_overlaps3716801
Ref: function_touches3717090
Ref: function_within3717384
Node: optimizing-spatial-analysis3717529
Node: creating-spatial-indexes3719128
Node: using-a-spatial-index3721655
Node: mysql-gis-conformance-and-compatibility3728318
Node: precision-math3729319
Node: precision-math-numbers3731788
Node: precision-math-decimal-changes3733480
Node: precision-math-expressions3737445
Node: precision-math-rounding3742338
Node: precision-math-examples3744348
Node: sql-syntax3753129
Node: sql-syntax-data-definition3753883
Node: alter-database3755988
Node: alter-event3759474
Node: alter-logfile-group3764169
Node: alter-function3767892
Node: alter-procedure3769048
Node: alter-server3770175
Node: alter-table3770950
Node: alter-table-partition-operations3798088
Node: alter-table-online-operations3816596
Ref: alter-table-online-limitations3821719
Node: alter-table-examples3828009
Node: alter-tablespace3834458
Node: alter-view3838116
Node: create-database3839079
Node: create-event3841205
Node: create-function3856882
Node: create-index3857385
Node: create-logfile-group3868740
Node: create-procedure3874308
Node: create-server3892269
Node: create-table3895174
Node: create-table-select3960693
Node: create-table-foreign-keys3970839
Node: silent-column-changes3985890
Node: create-tablespace3988967
Node: create-trigger3995166
Node: create-view4002665
Node: drop-database4016316
Node: drop-event4018443
Node: drop-function4019113
Node: drop-index4019596
Node: drop-logfile-group4021678
Node: drop-procedure4022655
Node: drop-server4023717
Node: drop-table4024433
Node: drop-tablespace4026349
Node: drop-trigger4027343
Node: drop-view4028510
Node: rename-table4029344
Node: truncate-table4031704
Node: sql-syntax-data-manipulation4035269
Node: call4036037
Node: delete4042666
Node: do4054621
Node: handler4055121
Node: insert4060383
Node: insert-select4075420
Node: insert-delayed4079420
Node: insert-on-duplicate4088527
Node: load-data4092837
Node: load-xml4123799
Node: replace4139565
Node: select4144171
Node: select-into4164325
Node: join4171025
Node: index-hints4190739
Node: union4196638
Node: subqueries4202278
Node: scalar-subqueries4206107
Node: comparisons-using-subqueries4208438
Node: any-in-some-subqueries4209984
Node: all-subqueries4212100
Node: row-subqueries4213805
Node: exists-and-not-exists-subqueries4216305
Node: correlated-subqueries4218385
Node: from-clause-subqueries4220525
Node: subquery-errors4226983
Node: optimizing-subqueries4229780
Node: rewriting-subqueries4233866
Node: update4235492
Node: sql-syntax-transactions4242726
Node: commit4243825
Node: cannot-roll-back4251519
Node: implicit-commit4252247
Node: savepoint4258472
Node: lock-tables4260816
Node: lock-tables-and-transactions4271968
Node: lock-tables-and-triggers4275158
Node: lock-tables-restrictions4277349
Node: set-transaction4281814
Ref: set-transaction-scope4282294
Ref: set-transaction-isolation-level4284364
Ref: isolevel_repeatable-read4285611
Ref: isolevel_read-committed4286828
Ref: isolevel_read-uncommitted4287923
Ref: isolevel_serializable4288266
Node: xa4288879
Node: xa-statements4294619
Node: xa-states4298851
Node: sql-syntax-replication4301829
Node: replication-master-sql4302381
Node: purge-binary-logs4303372
Node: reset-master4306424
Node: set-sql-log-bin4308517
Node: replication-slave-sql4309117
Node: change-master-to4310155
Node: master-pos-wait4322760
Node: reset-slave4323251
Node: set-global-sql-slave-skip-counter4325020
Node: start-slave4326466
Node: stop-slave4330583
Node: sql-syntax-prepared-statements4332134
Node: prepare4340940
Node: execute4343451
Node: deallocate-prepare4344409
Node: statement-repreparation4344986
Node: sql-syntax-compound-statements4346532
Node: begin-end4347713
Node: statement-labels4349515
Node: declare4351131
Node: stored-program-variables4351919
Node: declare-local-variable4353273
Node: local-variable-scope4354460
Node: flow-control-statements4357156
Node: case4358375
Node: if4360803
Node: iterate4363189
Node: leave4363578
Node: loop4364120
Node: repeat4365241
Node: return4366409
Node: while4367018
Node: cursors4367779
Node: close4369312
Node: declare-cursor4369749
Node: fetch4370858
Node: open4371702
Node: condition-handling4371937
Node: declare-condition4375477
Node: declare-handler4377609
Node: resignal4384955
Node: resignal-alone4388652
Node: resignal-with-new-signal4391189
Node: resignal-with-condition4392807
Node: resignal-handler4395307
Node: signal4396486
Node: signal-condition-information-items4404797
Node: signal-effects4408162
Node: sql-syntax-server-administration4410205
Node: account-management-sql4410801
Node: create-user4411933
Node: drop-user4415797
Node: grant4417264
Ref: grant-privileges4420715
Ref: grant-global-privileges4425962
Ref: grant-database-privileges4426574
Ref: grant-table-privileges4427369
Ref: grant-column-privileges4428058
Ref: grant-routine-privileges4428546
Ref: grant-proxy-privileges4429313
Ref: grant-accounts-passwords4431557
Ref: grant-other-characteristics4436468
Ref: grant-mysql-vs-standard-sql4445039
Node: rename-user4446901
Node: revoke4448257
Node: set-password4450656
Node: table-maintenance-sql4454724
Node: analyze-table4455226
Node: check-table4457282
Node: checksum-table4467732
Node: optimize-table4469609
Node: repair-table4476753
Node: plugin-sql4483390
Node: create-function-udf4483891
Node: drop-function-udf4486845
Node: install-plugin4487824
Node: uninstall-plugin4492502
Node: set-statement4494271
Node: show4504954
Node: show-authors4510167
Node: show-binary-logs4510597
Node: show-binlog-events4511546
Node: show-character-set4512985
Node: show-collation4514282
Node: show-columns4517124
Node: show-contributors4522059
Node: show-create-database4522578
Node: show-create-event4523817
Node: show-create-function4525869
Node: show-create-procedure4526249
Node: show-create-table4528343
Node: show-create-trigger4529219
Node: show-create-view4530908
Node: show-databases4533599
Node: show-engine4534816
Ref: show-engine-ndb-status4540743
Node: show-engines4547852
Node: show-errors4552113
Node: show-events4553349
Node: show-function-code4558254
Node: show-function-status4558613
Node: show-grants4559013
Node: show-index4561066
Node: show-master-status4563618
Node: show-open-tables4564358
Node: show-plugins4566091
Node: show-privileges4568538
Node: show-procedure-code4569990
Node: show-procedure-status4572349
Node: show-processlist4574194
Node: show-profile4579258
Node: show-profiles4585810
Node: show-relaylog-events4586281
Node: show-slave-hosts4587407
Node: show-slave-status4589161
Node: show-status4603355
Node: show-table-status4606541
Node: show-tables4612027
Node: show-triggers4613170
Node: show-variables4615887
Node: show-warnings4622177
Node: other-administrative-sql4628459
Node: binlog4628964
Node: cache-index4629557
Node: flush4634114
Node: kill4645868
Node: load-index4648915
Node: reset4652177
Node: sql-syntax-utility4653199
Node: describe4653570
Node: explain4653966
Node: help4658425
Node: use4664441
Node: storage-engines4665370
Node: storage-engine-setting4679195
Node: pluggable-storage-overview4682191
Node: pluggable-storage4684429
Node: pluggable-storage-common-layer4686023
Node: innodb-storage-engine4689366
Node: innodb-default-se4698339
Node: innodb-configuration4709727
Node: innodb-multiple-tablespaces4723548
Node: innodb-raw-devices4733963
Node: innodb-init4736283
Node: error-creating-innodb4739618
Node: innodb-parameters4741538
Ref: option_mysqld_ignore-builtin-innodb4753102
Ref: option_mysqld_innodb4754068
Ref: option_mysqld_innodb-status-file4754625
Ref: sysvar_ignore_builtin_innodb4755579
Ref: sysvar_innodb_adaptive_flushing4756292
Ref: sysvar_innodb_adaptive_hash_index4757167
Ref: sysvar_innodb_additional_mem_pool_size4758209
Ref: sysvar_innodb_autoextend_increment4759540
Ref: sysvar_innodb_autoinc_lock_mode4760738
Ref: sysvar_innodb_buffer_pool_instances4761836
Ref: sysvar_innodb_buffer_pool_size4763635
Ref: sysvar_innodb_change_buffering4765959
Ref: sysvar_innodb_checksums4768076
Ref: sysvar_innodb_commit_concurrency4769019
Ref: sysvar_innodb_concurrency_tickets4770064
Ref: sysvar_innodb_data_file_path4771463
Ref: sysvar_innodb_data_home_dir4772986
Ref: sysvar_innodb_doublewrite4773963
Ref: sysvar_innodb_fast_shutdown4774855
Ref: sysvar_innodb_file_format4776561
Ref: sysvar_innodb_file_format_check4778055
Ref: sysvar_innodb_file_format_max4780359
Ref: sysvar_innodb_file_per_table4781457
Ref: sysvar_innodb_flush_log_at_trx_commit4782906
Ref: sysvar_innodb_flush_method4785937
Ref: sysvar_innodb_force_load_corrupted4789338
Ref: sysvar_innodb_force_recovery4790258
Ref: sysvar_innodb_io_capacity4791718
Ref: sysvar_innodb_large_prefix4795130
Ref: sysvar_innodb_lock_wait_timeout4796578
Ref: sysvar_innodb_locks_unsafe_for_binlog4798738
Ref: sysvar_innodb_log_buffer_size4806673
Ref: sysvar_innodb_log_file_size4807752
Ref: sysvar_innodb_log_files_in_group4809124
Ref: sysvar_innodb_log_group_home_dir4809980
Ref: sysvar_innodb_max_dirty_pages_pct4810908
Ref: sysvar_innodb_max_purge_lag4811862
Ref: sysvar_innodb_mirrored_log_groups4814089
Ref: sysvar_innodb_old_blocks_pct4814146
Ref: sysvar_innodb_old_blocks_time4815162
Ref: sysvar_innodb_open_files4817051
Ref: sysvar_innodb_print_all_deadlocks4818177
Ref: sysvar_innodb_purge_batch_size4819774
Ref: sysvar_innodb_purge_threads4820975
Ref: sysvar_innodb_random_read_ahead4822373
Ref: sysvar_innodb_read_ahead_threshold4823473
Ref: sysvar_innodb_read_io_threads4824689
Ref: sysvar_innodb_replication_delay4825873
Ref: sysvar_innodb_rollback_on_timeout4826683
Ref: sysvar_innodb_rollback_segments4827593
Ref: sysvar_innodb_spin_wait_delay4828589
Ref: sysvar_innodb_stats_method4829550
Ref: sysvar_innodb_stats_on_metadata4831087
Ref: sysvar_innodb_stats_sample_pages4832521
Ref: sysvar_innodb_strict_mode4833460
Ref: sysvar_innodb_support_xa4834342
Ref: sysvar_innodb_sync_spin_loops4836223
Ref: sysvar_innodb_table_locks4837051
Ref: sysvar_innodb_thread_concurrency4838423
Ref: sysvar_innodb_thread_sleep_delay4840200
Ref: sysvar_innodb_use_native_aio4840976
Ref: sysvar_innodb_use_sys_malloc4842385
Ref: sysvar_innodb_version4843107
Ref: sysvar_innodb_write_io_threads4843306
Node: using-innodb-tables4846167
Node: innodb-transactions-with-different-apis4848144
Node: converting-tables-to-innodb4850286
Node: innodb-auto-increment-handling4853240
Node: innodb-auto-increment-traditional4854497
Node: innodb-auto-increment-configurable4858561
Node: innodb-foreign-key-constraints4875243
Node: innodb-and-mysql-replication4879223
Node: innodb-data-log-reconfiguration4883785
Node: innodb-backup4887767
Node: innodb-recovery4894103
Node: forcing-innodb-recovery4895492
Node: innodb-checkpoints4899182
Node: innodb-migration4901278
Node: innodb-transaction-model4903347
Node: innodb-lock-modes4907687
Node: innodb-consistent-read4914012
Node: innodb-locking-reads4920278
Node: innodb-record-level-locks4925495
Node: innodb-next-key-locking4931069
Node: innodb-locks-set4934376
Node: innodb-implicit-commit4944420
Node: innodb-deadlock-detection4945270
Node: innodb-deadlocks4946937
Node: innodb-multi-versioning4951702
Node: innodb-table-and-index4955205
Node: innodb-index-types4956280
Node: innodb-physical-structure4958766
Node: innodb-insert-buffering4960079
Node: innodb-adaptive-hash4962421
Node: innodb-physical-record4965177
Node: innodb-disk-management4970787
Node: innodb-disk-io4971810
Node: innodb-file-space4974051
Node: innodb-file-defragmenting4978288
Node: innodb-error-handling4979889
Node: innodb-error-codes4982940
Node: operating-system-error-codes4986198
Ref: operating-system-error-codes-linux4986534
Ref: operating-system-error-codes-windows4988324
Node: innodb-tuning-troubleshooting4992319
Node: innodb-tuning4992895
Node: innodb-monitors4993321
Node: innodb-standard-monitor4999204
Node: innodb-tablespace-monitor5013005
Node: innodb-table-monitor5018825
Node: innodb-troubleshooting5028204
Node: innodb-troubleshooting-datadict5030313
Node: innodb-restrictions5034778
Node: innodb-5-55045968
Node: innodb-introduction5047169
Node: innodb-introduction-features5048142
Node: innodb-introduction-obtaining5052257
Node: innodb-introduction-version5053157
Node: innodb-introduction-restrictions5054823
Node: innodb-create-index5057729
Node: innodb-create-index-overview5058657
Node: innodb-create-index-examples5060438
Node: innodb-create-index-implementation5063232
Node: innodb-create-index-concurrency5064981
Node: innodb-create-index-recovery5067403
Node: innodb-create-index-limitations5069316
Node: innodb-compression5072780
Node: innodb-compression-background5073670
Node: innodb-compression-usage5076005
Node: innodb-compression-enabling5078194
Node: innodb-compression-syntax-warnings5081871
Ref: innodb-compression-create-and-alter-options-table5083237
Ref: innodb-compression-create-and-alter-errors-table5085972
Node: innodb-compression-tuning5088250
Ref: innodb-compression-tuning-when5089046
Ref: innodb-compression-tuning-when-data5089516
Ref: innodb-compression-application5092188
Ref: innodb-compression-in-database5092521
Ref: innodb-compression-in-application5093109
Ref: innodb-compression-hybrid5093592
Ref: innodb-compression-tuning-when-workload5094037
Ref: innodb-compression-tuning-when-config5095778
Ref: innodb-compression-tuning-when-size5096759
Ref: innodb-compression-tuning-monitoring5097604
Node: innodb-compression-internals5100652
Ref: innodb-compression-internals-algorithms5101074
Ref: innodb-compression-internals-storage5102777
Ref: innodb-compression-internals-storage-btree5103750
Ref: innodb-compression-internals-storage-blobs5106224
Ref: innodb-compression-internals-pool5108958
Ref: innodb-compression-internals-log5111106
Node: innodb-file-format5112195
Ref: innodb-file-format-named5113510
Node: innodb-file-format-enabling5114072
Node: innodb-file-format-compatibility5114926
Node: innodb-file-format-compatibility-checking5120205
Ref: innodb-file-format-compatibility-table5124951
Node: innodb-file-format-compatibility-checking-table-access5130999
Node: innodb-file-format-identifying5133977
Node: innodb-file-format-downgrading5136797
Node: innodb-file-format-future5137486
Node: innodb-row-format5138384
Node: innodb-row-format-overview5139256
Node: innodb-row-format-specification5140932
Node: innodb-row-format-dynamic5141343
Node: innodb-row-format-antelope5143036
Node: innodb-information-schema5144486
Node: innodb-information-schema-compression-tables5146127
Node: innodb-information-schema-innodb_cmp5147083
Node: innodb-information-schema-innodb_cmpmem5148285
Node: innodb-information-schema-examples-compression-sect5149933
Ref: innodb-information-schema-examples-compression5150228
Ref: innodb-information-schema-sample-innodb_cmp5150813
Ref: innodb-information-schema-sample-innodb_cmpmem5152774
Node: innodb-information-schema-transactions5153758
Node: innodb-information-schema-examples5156880
Ref: innodb-information-schema-examples-simple-blocking5157151
Ref: innodb-information-schema-examples-simple-blocking-trx5161223
Ref: innodb-information-schema-examples-simple-blocking-locks5162411
Ref: innodb-information-schema-examples-simple-blocking-waits5163316
Ref: innodb-information-schema-sample-locks5163629
Ref: innodb-information-schema-sample-processlist5165451
Ref: innodb-information-schema-sample-innodb_trx5167698
Ref: innodb-information-schema-sample-innodb_lock_waits5171289
Ref: innodb-information-schema-sample-innodb_locks5172027
Node: innodb-information-schema-notes5176908
Node: innodb-information-schema-understanding_innodb_locking5177503
Node: innodb-information-schema-rapidly_changing_internal_data5179411
Node: innodb-information-schema-note_inconsistency5181708
Node: innodb-performance5183301
Node: innodb-performance-overview5185758
Node: innodb-performance-latching5187060
Node: innodb-performance-use_sys_malloc5190700
Node: innodb-performance-change_buffering5193938
Node: innodb-performance-adaptive_hash_index5196926
Node: innodb-performance-thread_concurrency5197717
Ref: innodb-thread-concurrency-table5199844
Node: innodb-performance-read_ahead5202568
Node: innodb-performance-multiple_io_threads5205629
Node: innodb-performance-aio-linux5207717
Node: innodb-performance-group_commit5209069
Node: innodb-performance-thread_io_rate5210878
Node: innodb-performance-adaptive_flushing5212938
Node: innodb-performance-pause_instruction5215703
Node: innodb-performance-spin_lock_polling5216940
Node: innodb-performance-midpoint_insertion5218858
Node: innodb-performance-recovery5225179
Node: innodb-performance-schema5226017
Node: innodb-multiple-buffer-pools5229408
Node: innodb-multiple-rollback-segments5231174
Node: innodb-improved-purge-scheduling5232799
Node: innodb-improved-log-sys-mutex5234165
Node: innodb-separate-flush-list-mutex5235199
Node: innodb-other-changes5235833
Node: innodb-other-changes-file-formats5237399
Node: innodb-other-changes-dynamic-parameters5238854
Node: innodb-other-changes-innodb_file_per_table5239870
Node: innodb-other-changes-innodb_stats_on_metadata5242162
Node: innodb-other-changes-innodb_lock_wait_timeout5243069
Node: innodb-other-changes-innodb_adaptive_hash_index5244537
Node: innodb-other-changes-truncate5245664
Node: innodb-other-changes-strict-mode5247287
Node: innodb-other-changes-statistics-estimation5249891
Node: innodb-other-changes-drop-index5253636
Node: innodb-other-changes-show-mutex5255838
Node: innodb-other-changes-readahead-counters5256936
Node: innodb-installation5258579
Node: innodb-upgrading5260585
Node: innodb-downgrading5261135
Node: innodb-downgrading-overview5261393
Node: innodb-changes5261933
Node: innodb-changes-1x5262366
Node: innodb-changes-115262767
Node: innodb-changes-10x5265879
Node: innodb-contrib5266382
Node: innodb-contrib-google5267006
Node: innodb-contrib-percona5270261
Node: innodb-contrib-sun_microsystems5272874
Node: innodb-parameter-changes5275443
Node: innodb-parameters-new5275859
Ref: innodb-new-parameter-summary-table5276240
Node: innodb-parameters-deprecated5285294
Node: innodb-parameters-new-defaults5285948
Ref: innodb-parameters-new-defaults-table5286282
Node: myisam-storage-engine5286701
Node: myisam-start5296791
Node: key-space5302441
Node: myisam-table-formats5303572
Node: static-format5304746
Node: dynamic-format5307151
Node: compressed-format5310367
Node: myisam-table-problems5312312
Node: corrupted-myisam-tables5312872
Node: myisam-table-close5314944
Node: memory-storage-engine5317626
Ref: memory-compared-cluster5320358
Node: csv-storage-engine5332027
Node: se-csv-repair5334093
Node: se-csv-limitations5337077
Node: archive-storage-engine5337605
Node: blackhole-storage-engine5343993
Node: merge-storage-engine5350392
Node: merge-table-advantages5357474
Node: merge-table-problems5361256
Node: federated-storage-engine5368585
Node: federated-description5369804
Ref: figure-se-federated-structure5371472
Node: federated-create5372748
Node: federated-create-connection5374926
Node: federated-create-server5377533
Node: federated-usagenotes5380990
Node: federated-storage-engine-resources5386045
Node: example-storage-engine5386465
Node: storage-engines-other5387813
Node: ha-overview5388574
Ref: figure_ha-cost-vs-nines5392318
Ref: ha-availability-comparison5392486
Node: ha-ovm-template5396197
Node: ha-drbd5398688
Ref: ha-drbd-overview5400523
Node: ha-wfc5402566
Ref: ha-wfc-overview5403304
Node: ha-vm5405053
Node: ha-vm-aws-setup5408606
Node: ha-vm-aws-instance5412557
Node: ha-vm-aws-deploy5414866
Node: ha-zfs-replication5419042
Node: ha-zfs-config5423779
Node: ha-zfs-mysql5427125
Node: ha-zfs-mysql-recovery5428655
Node: ha-memcached5430459
Ref: ha-memcached-fig-overview5432451
Node: ha-memcached-install5433835
Node: ha-memcached-using5436977
Node: ha-memcached-using-deployment5447210
Node: ha-memcached-using-namespaces5449394
Node: ha-memcached-using-expiry5450828
Node: ha-memcached-using-hashtypes5453081
Ref: ha-memcached-using-hashtypes-fig-selection5455047
Ref: ha-memcached-using-hashtypes-fig-addselect5458231
Node: ha-memcached-using-dtrace5461465
Node: ha-memcached-using-memory5469723
Ref: ha-memcached-fig-slabs5471964
Node: ha-memcached-using-threads5473845
Node: ha-memcached-using-logs5475649
Node: ha-memcached-interfaces5484880
Node: ha-memcached-operations5486656
Node: ha-memcached-mysql-frontend5489979
Ref: ha-memcached-fig-basicflow5492237
Node: ha-memcached-interfaces-libmemcached5493275
Node: ha-memcached-interfaces-libmemcached-base5497330
Node: ha-memcached-interfaces-libmemcached-servers5498500
Node: ha-memcached-interfaces-libmemcached-set5501734
Node: ha-memcached-interfaces-libmemcached-get5506946
Node: ha-memcached-interfaces-libmemcached-behaviors5511564
Node: ha-memcached-interfaces-libmemcached-utilities5515736
Node: ha-memcached-interfaces-perl5517582
Node: ha-memcached-interfaces-python5524401
Node: ha-memcached-interfaces-php5530860
Node: ha-memcached-interfaces-ruby5539135
Node: ha-memcached-interfaces-java5542051
Node: ha-memcached-interfaces-protocol5546158
Ref: ha-memcached-interfaces-protocol-responses5555665
Node: ha-memcached-stats5557167
Node: ha-memcached-stats-general5563015
Node: ha-memcached-stats-slabs5569184
Node: ha-memcached-stats-items5573777
Node: ha-memcached-stats-sizes5576382
Node: ha-memcached-stats-detail5577707
Node: ha-memcached-stats-memcached-tool5579898
Node: ha-memcached-faq5585736
Ref: qandaitem-16-6-5-1-15587590
Ref: qandaitem-16-6-5-1-25587817
Ref: qandaitem-16-6-5-1-35588735
Ref: qandaitem-16-6-5-1-45589005
Ref: qandaitem-16-6-5-1-55589687
Ref: qandaitem-16-6-5-1-65590489
Ref: qandaitem-16-6-5-1-75590993
Ref: qandaitem-16-6-5-1-85591735
Ref: qandaitem-16-6-5-1-95592067
Ref: qandaitem-16-6-5-1-105592634
Ref: qandaitem-16-6-5-1-115593167
Ref: qandaitem-16-6-5-1-125593857
Ref: qandaitem-16-6-5-1-135594086
Ref: qandaitem-16-6-5-1-145594417
Node: mysql-proxy5595970
Node: mysql-proxy-platforms5598799
Node: mysql-proxy-install5599839
Node: mysql-proxy-install-binary5600937
Node: mysql-proxy-install-source5602778
Node: mysql-proxy-install-cvs5604340
Node: mysql-proxy-configuration-windows5606216
Node: mysql-proxy-configuration5608291
Ref: option_mysql-proxy_help5613676
Ref: option_mysql-proxy_help-admin5613886
Ref: option_mysql-proxy_help-all5614071
Ref: option_mysql-proxy_help-proxy5614238
Ref: option_mysql-proxy_admin-address5614423
Ref: option_mysql-proxy_admin-lua-script5614942
Ref: option_mysql-proxy_admin-password5615465
Ref: option_mysql-proxy_admin-username5616081
Ref: option_mysql-proxy_basedir5616739
Ref: option_mysql-proxy_daemon5617395
Ref: option_mysql-proxy_defaults-file5617609
Ref: option_mysql-proxy_event-threads5617909
Ref: option_mysql-proxy_keepalive5618379
Ref: option_mysql-proxy_log-backtrace-on-crash5618964
Ref: option_mysql-proxy_log-file5619309
Ref: option_mysql-proxy_log-level5619853
Ref: option_mysql-proxy_log-use-syslog5620620
Ref: option_mysql-proxy_lua-cpath5620877
Ref: option_mysql-proxy_lua-path5621361
Ref: option_mysql-proxy_max-open-files5621806
Ref: option_mysql-proxy_no-proxy5622330
Ref: option_mysql-proxy_plugin-dir5622545
Ref: option_mysql-proxy_plugins5623030
Ref: option_mysql-proxy_proxy-address5623804
Ref: option_mysql-proxy_proxy-read-only-backend-addresses5624443
Ref: option_mysql-proxy_proxy-backend-addresses5626089
Ref: option_mysql-proxy_proxy-pool-no-change-user5627611
Ref: option_mysql-proxy_proxy-skip-profiling5628038
Ref: option_mysql-proxy_proxy-fix-bug-253715628375
Ref: option_mysql-proxy_proxy-lua-script5629075
Ref: option_mysql-proxy_pid-file5629993
Ref: option_mysql-proxy_user5630441
Ref: option_mysql-proxy_version5630838
Node: mysql-proxy-scripting5632379
Node: mysql-proxy-scripting-injection5637441
Node: mysql-proxy-scripting-structures5640286
Ref: mysql-proxy-scripting-structures-proxy5641028
Ref: mysql-proxy-scripting-structures-connection5642165
Ref: mysql-proxy-scripting-structures-backends5644629
Ref: mysql-proxy-scripting-structures-queries5646030
Ref: mysql-proxy-scripting-structures-response5648728
Ref: mysql-proxy-scripting-structures-resultset5651803
Ref: mysql-proxy-scripting-structures-return-states5653911
Ref: mysql-proxy-scripting-structures-packet-states5654882
Ref: mysql-proxy-scripting-structures-backend-states5655307
Ref: mysql-proxy-scripting-structures-command-constants5656078
Ref: mysql-proxy-scripting-structures-type-constants5657875
Node: mysql-proxy-scripting-connect-server5659304
Node: mysql-proxy-scripting-read-handshake5660806
Node: mysql-proxy-scripting-read-auth5662950
Node: mysql-proxy-scripting-read-auth-result5664392
Node: mysql-proxy-scripting-read-query5666028
Node: mysql-proxy-scripting-read-query-result5669442
Node: mysql-proxy-using5674132
Node: mysql-proxy-using-admin5676591
Node: mysql-proxy-faq5689083
Ref: qandaitem-16-7-6-1-15693107
Ref: qandaitem-16-7-6-1-25693546
Ref: qandaitem-16-7-6-1-35693757
Ref: qandaitem-16-7-6-1-45693944
Ref: qandaitem-16-7-6-1-55694224
Ref: qandaitem-16-7-6-1-65694473
Ref: qandaitem-16-7-6-1-75694713
Ref: qandaitem-16-7-6-1-85694887
Ref: qandaitem-16-7-6-1-95695116
Ref: qandaitem-16-7-6-1-105695232
Ref: qandaitem-16-7-6-1-115695482
Ref: qandaitem-16-7-6-1-125695800
Ref: qandaitem-16-7-6-1-135696075
Ref: qandaitem-16-7-6-1-145696299
Ref: qandaitem-16-7-6-1-155696546
Ref: qandaitem-16-7-6-1-165696766
Ref: qandaitem-16-7-6-1-175696997
Ref: qandaitem-16-7-6-1-185697202
Ref: qandaitem-16-7-6-1-195697379
Ref: qandaitem-16-7-6-1-205697572
Ref: qandaitem-16-7-6-1-215697917
Ref: qandaitem-16-7-6-1-225698284
Ref: qandaitem-16-7-6-1-235698618
Ref: qandaitem-16-7-6-1-245698863
Ref: qandaitem-16-7-6-1-255699168
Ref: qandaitem-16-7-6-1-265699430
Ref: qandaitem-16-7-6-1-275699612
Ref: qandaitem-16-7-6-1-285699895
Ref: qandaitem-16-7-6-1-295700020
Ref: qandaitem-16-7-6-1-305700330
Ref: qandaitem-16-7-6-1-315700555
Node: replication5700846
Node: replication-configuration5705476
Node: replication-howto5709275
Node: replication-howto-masterbaseconfig5713626
Node: replication-howto-slavebaseconfig5715675
Node: replication-howto-repuser5717210
Node: replication-howto-masterstatus5718936
Node: replication-howto-mysqldump5722742
Node: replication-howto-rawdata5725014
Node: replication-howto-newservers5728909
Node: replication-howto-existingdata5730819
Node: replication-howto-additionalslaves5735431
Node: replication-howto-slaveinit5739389
Node: replication-formats5740607
Node: replication-sbr-rbr5744890
Ref: replication-sbr-rbr-sbr-advantages5745866
Ref: replication-sbr-rbr-sbr-disadvantages5746335
Ref: replication-sbr-rbr-rbr-advantages5750179
Ref: replication-sbr-rbr-rbr-disadvantages5751766
Node: replication-rbr-usage5753582
Ref: replication-rbr-usage-temptables5754490
Node: replication-rbr-safe-unsafe5761404
Ref: replication-rbr-safe-unsafe-not5764746
Node: replication-options5768302
Ref: option_mysqld_server-id5769364
Node: replication-options-table5770676
Ref: replication-optvar-summary-table5771110
Ref: binlog-optvar-summary-table5784259
Node: replication-options-master5787862
Ref: replication-sysvars-masters5788852
Ref: sysvar_auto_increment_increment5788980
Ref: sysvar_auto_increment_offset5796920
Node: replication-options-slave5797715
Ref: replication-optvars-slaves5798718
Ref: option_mysqld_abort-slave-event-count5799147
Ref: option_mysqld_disconnect-slave-event-count5800393
Ref: option_mysqld_log-slave-updates5800938
Ref: option_mysqld_log-slow-slave-statements5802698
Ref: option_mysqld_master-info-file5805164
Ref: option_mysqld_master-retry-count5805863
Ref: option_mysqld_slave-max-allowed-packet5807200
Ref: option_mysqld_max-relay-log-size5808690
Ref: option_mysqld_read-only5809523
Ref: option_mysqld_relay-log5810374
Ref: option_mysqld_relay-log-index5813112
Ref: option_mysqld_relay-log-info-file5814700
Ref: option_mysqld_relay-log-purge5815421
Ref: option_mysqld_relay-log-recovery5816235
Ref: option_mysqld_relay-log-space-limit5817029
Ref: option_mysqld_replicate-do-db5819261
Ref: option_mysqld_replicate-ignore-db5824334
Ref: option_mysqld_replicate-do-table5827248
Ref: option_mysqld_replicate-ignore-table5828230
Ref: option_mysqld_replicate-rewrite-db5829294
Ref: option_mysqld_replicate-same-server-id5831579
Ref: option_mysqld_replicate-wild-do-table5832717
Ref: option_mysqld_replicate-wild-ignore-table5835095
Ref: option_mysqld_report-host5836252
Ref: option_mysqld_report-password5837367
Ref: option_mysqld_report-port5838428
Ref: option_mysqld_report-user5839782
Ref: option_mysqld_show-slave-auth-info5840816
Ref: option_mysqld_skip-slave-start5841441
Ref: option_mysqld_slave_compressed_protocol5842004
Ref: option_mysqld_slave-load-tmpdir5842797
Ref: option_mysqld_slave-net-timeout5844619
Ref: option_mysqld_slave-skip-errors5845768
Ref: replication-optvars-slaves-obsolete5848861
Ref: option_mysqld_master-host5849277
Ref: option_mysqld_master-user5849300
Ref: option_mysqld_master-password5849323
Ref: option_mysqld_master-port5849350
Ref: option_mysqld_master-connect-retry5849373
Ref: option_mysqld_master-ssl5849405
Ref: option_mysqld_master-ssl-ca5849427
Ref: option_mysqld_master-ssl-capath5849452
Ref: option_mysqld_master-ssl-cert5849481
Ref: option_mysqld_master-ssl-cipher5849508
Ref: option_mysqld_master-ssl-key5849537
Ref: replication-sysvars-slaves5849558
Ref: sysvar_init_slave5849889
Ref: sysvar_relay_log5850901
Ref: sysvar_relay_log_index5851478
Ref: sysvar_relay_log_info_file5852237
Ref: sysvar_relay_log_recovery5852997
Ref: sysvar_rpl_recovery_rank5854092
Ref: sysvar_slave_compressed_protocol5854179
Ref: sysvar_slave_exec_mode5854906
Ref: sysvar_slave_load_tmpdir5856250
Ref: sysvar_slave_max_allowed_packet5857014
Ref: sysvar_slave_net_timeout5858447
Ref: sysvar_slave_skip_errors5859179
Ref: sysvar_slave_transaction_retries5860325
Ref: sysvar_slave_type_conversions5861912
Ref: sysvar_sql_slave_skip_counter5863307
Ref: sysvar_sync_master_info5864137
Ref: sysvar_sync_relay_log5865635
Ref: sysvar_sync_relay_log_info5867469
Node: replication-options-binary-log5869037
Ref: replication-optvars-binlog5869679
Ref: option_mysqld_binlog-row-event-max-size5869896
Ref: option_mysqld_log-bin5871108
Ref: option_mysqld_log-bin-index5872886
Ref: option_mysqld_log-bin-trust-function-creators5873489
Ref: option_mysqld_log-bin-use-v1-row-events5874473
Ref: option_mysqld_binlog-do-db5877549
Ref: option_mysqld_binlog-ignore-db5883258
Ref: option_mysqld_max-binlog-dump-events5886834
Ref: option_mysqld_sporadic-binlog-dump-fail5887357
Ref: replication-sysvars-binlog5887883
Ref: sysvar_binlog_cache_size5888204
Ref: sysvar_binlog_direct_non_transactional_updates5890420
Ref: sysvar_binlog_format5893189
Ref: sysvar_binlog_stmt_cache_size5896700
Ref: sysvar_log_bin5898951
Ref: sysvar_log_bin_use_v1_row_events5899507
Ref: sysvar_log_slave_updates5901613
Ref: sysvar_max_binlog_cache_size5902436
Ref: sysvar_max_binlog_size5904836
Ref: sysvar_max_binlog_stmt_cache_size5906151
Ref: sysvar_sync_binlog5908050
Node: replication-administration5909863
Node: replication-administration-status5910473
Node: replication-administration-pausing5917079
Node: replication-implementation5919169
Node: replication-implementation-details5921826
Node: slave-logs5927493
Node: slave-logs-relaylog5928733
Node: slave-logs-status5932132
Node: replication-rules5938365
Node: replication-rules-db-options5941454
Node: replication-rules-table-options5945140
Node: replication-rules-examples5948436
Node: replication-solutions5951725
Node: replication-solutions-backups5954019
Node: replication-solutions-backups-mysqldump5956053
Node: replication-solutions-backups-rawdata5958760
Node: replication-solutions-backups-read-only5961615
Node: replication-solutions-diffengines5965743
Node: replication-solutions-scaleout5969882
Ref: figure_replication-scaleout5971075
Node: replication-solutions-partitioning5973060
Ref: figure_replication-multi-db5973676
Node: replication-solutions-performance5975905
Ref: figure_replication-performance5977050
Node: replication-solutions-switch5979306
Ref: figure_replication-redundancy-before5980915
Ref: figure_replication-redundancy-after5984082
Node: replication-solutions-ssl5985424
Node: replication-semisync5989578
Node: replication-semisync-interface5995400
Node: replication-semisync-installation5998069
Node: replication-semisync-monitoring6003218
Node: replication-notes6005083
Node: replication-features6005600
Node: replication-features-auto-increment6010509
Node: replication-features-blackhole6013829
Node: replication-features-charset6015003
Node: replication-features-create-if-not-exists6017250
Node: replication-features-create-select6018479
Node: replication-features-create-alter-drop-server6022193
Node: replication-features-current-user6022764
Node: replication-features-drop-if-exists6024538
Node: replication-features-differing-tables6025432
Node: replication-features-more-columns6026491
Node: replication-features-different-data-types6031317
Ref: replication-features-attribute-promotion6034033
Ref: replication-features-type-conversions-old6041621
Node: replication-features-directory6045299
Node: replication-features-invoked6046294
Node: replication-features-floatvalues6051416
Node: replication-features-flush6052292
Node: replication-features-functions6053734
Node: replication-features-limit6060916
Node: replication-features-load-data6061996
Node: replication-features-logging6062986
Node: replication-features-repair-table6063476
Node: replication-features-shutdowns6064439
Node: replication-features-max-allowed-packet6067065
Node: replication-features-memory6068322
Node: replication-features-temptables6071749
Node: replication-features-mysqldb6074457
Node: replication-features-optimizer6075190
Node: replication-features-reserved-words6075952
Node: replication-features-set-password6078059
Node: replication-features-slaveerrors6078573
Node: replication-features-sql-mode6080920
Node: replication-features-timeout6081996
Node: replication-features-timestamp6082871
Node: replication-features-timezone6083804
Node: replication-features-transactions6084847
Ref: replication-features-transactions-trx-nontrx-mixed6086623
Node: replication-features-triggers6091052
Node: replication-features-truncate6092505
Node: replication-features-variables6093680
Node: replication-features-views6097868
Node: replication-compatibility6098715
Node: replication-upgrade6103033
Node: replication-problems6107006
Node: replication-bugs6112176
Node: mysql-cluster6114851
Node: mysql-cluster-overview6124019
Node: mysql-cluster-basics6128991
Node: mysql-cluster-nodes-groups6140619
Ref: mysql-cluster-nodes-groups-nodegroup6141872
Ref: mysql-cluster-nodes-groups-partition6142852
Ref: mysql-cluster-nodes-groups-user-partitioning6143239
Ref: mysql-cluster-nodes-groups-replica6144714
Node: mysql-cluster-overview-requirements6147358
Ref: mysql-cluster-network-latency-issues6150479
Node: mysql-cluster-development6153856
Node: mysql-cluster-development-5-5-ndb-7-26156502
Ref: mysql-cluster-development-5-5-ndb-7-2-defaults-changes6162376
Node: mysql-cluster-compared6165925
Node: mysql-cluster-ndb-innodb-engines6169369
Node: mysql-cluster-ndb-innodb-workloads6177462
Node: mysql-cluster-ndb-innodb-usage6180787
Node: mysql-cluster-limitations6183368
Node: mysql-cluster-limitations-syntax6185861
Node: mysql-cluster-limitations-limits6192916
Node: mysql-cluster-limitations-transactions6196867
Node: mysql-cluster-limitations-error-handling6204103
Node: mysql-cluster-limitations-database-objects6205160
Node: mysql-cluster-limitations-unsupported6206290
Node: mysql-cluster-limitations-performance6208174
Node: mysql-cluster-limitations-exclusive-to-cluster6209381
Node: mysql-cluster-limitations-disk-data6211644
Node: mysql-cluster-limitations-multiple-nodes6213227
Node: mysql-cluster-limitations-resolved6215960
Node: mysql-cluster-installation6226082
Node: mysql-cluster-install-linux6232981
Node: mysql-cluster-install-linux-binary6235131
Node: mysql-cluster-install-linux-rpm6242899
Node: mysql-cluster-install-linux-source6249263
Node: mysql-cluster-install-windows6254392
Node: mysql-cluster-install-windows-binary6255498
Node: mysql-cluster-install-windows-source6268702
Node: mysql-cluster-install-windows-initial-start6271126
Node: mysql-cluster-install-windows-service6279991
Node: mysql-cluster-install-configuration6287380
Node: mysql-cluster-install-first-start6293079
Node: mysql-cluster-install-example-data6296045
Node: mysql-cluster-install-shutdown-restart6305754
Node: mysql-cluster-upgrade-downgrade6308720
Node: mysql-cluster-configuration6312356
Node: mysql-cluster-quick6314337
Node: mysql-cluster-config-file6319941
Node: mysql-cluster-config-example6325480
Ref: mysql-cluster-config-ini-sections6331684
Node: mysql-cluster-config-starting6334038
Node: mysql-cluster-connection-strings6342218
Node: mysql-cluster-computer-definition6347092
Ref: ndbparam-computer-id6347558
Ref: id-computer-table6347565
Ref: ndbparam-computer-hostname6348298
Ref: hostname-computer-table6348311
Node: mysql-cluster-mgm-definition6348728
Ref: ndbparam-mgmd-id6349402
Ref: id-mgmd-table6349409
Ref: ndbparam-mgmd-nodeid6350612
Ref: nodeid-mgmd-table6350623
Ref: ndbparam-mgmd-executeoncomputer6351858
Ref: executeoncomputer-mgmd-table6351880
Ref: ndbparam-mgmd-portnumber6352329
Ref: portnumber-mgmd-table6352344
Ref: ndbparam-mgmd-hostname6352792
Ref: hostname-mgmd-table6352805
Ref: ndbparam-mgmd-logdestination6353412
Ref: logdestination-mgmd-table6353431
Ref: ndbparam-mgmd-arbitrationrank6355811
Ref: arbitrationrank-mgmd-table6355831
Ref: ndbparam-mgmd-arbitrationdelay6357290
Ref: arbitrationdelay-mgmd-table6357311
Ref: ndbparam-mgmd-datadir6357865
Ref: datadir-mgmd-table6357877
Ref: ndbparam-mgmd-heartbeatthreadpriority6358695
Ref: heartbeatthreadpriority-mgmd-table6358723
Ref: ndbparam-mgmd-extrasendbuffermemory6359522
Ref: extrasendbuffermemory-mgmd-table6359548
Ref: ndbparam-mgmd-totalsendbuffermemory6360157
Ref: totalsendbuffermemory-mgmd-table6360183
Node: mysql-cluster-ndbd-definition6361520
Ref: mysql-cluster-identifying-data-nodes6364023
Ref: ndbparam-ndbd-id6364184
Ref: id-ndbd-table6364191
Ref: ndbparam-ndbd-nodeid6365082
Ref: nodeid-ndbd-table6365093
Ref: ndbparam-ndbd-executeoncomputer6365978
Ref: executeoncomputer-ndbd-table6366000
Ref: ndbparam-ndbd-hostname6366418
Ref: hostname-ndbd-table6366431
Ref: ndbparam-ndbd-serverport6367026
Ref: serverport-ndbd-table6367041
Ref: ndbparam-ndbd-tcpbind_inaddr_any6368491
Ref: ndbparam-ndbd-nodegroup6368704
Ref: nodegroup-ndbd-table6368718
Ref: ndbparam-ndbd-noofreplicas6370116
Ref: noofreplicas-ndbd-table6370133
Ref: ndbparam-ndbd-datadir6372574
Ref: datadir-ndbd-table6372586
Ref: ndbparam-ndbd-filesystempath6373134
Ref: filesystempath-ndbd-table6373153
Ref: ndbparam-ndbd-backupdatadir6374182
Ref: backupdatadir-ndbd-table6374200
Ref: mysql-cluster-data-memory-index-memory-string-memory6375060
Ref: ndbparam-ndbd-datamemory6375441
Ref: datamemory-ndbd-table6375456
Ref: ndbparam-ndbd-indexmemory6380906
Ref: indexmemory-ndbd-table6380922
Ref: ndbparam-ndbd-stringmemory6381910
Ref: stringmemory-ndbd-table6381927
Ref: ndbparam-ndbd-minfreepct6386103
Ref: minfreepct-ndbd-table6386479
Ref: mysql-cluster-transaction-parameters6387029
Ref: ndbparam-ndbd-maxnoofconcurrenttransactions6387814
Ref: maxnoofconcurrenttransactions-ndbd-table6387848
Ref: ndbparam-ndbd-maxnoofconcurrentoperations6390828
Ref: maxnoofconcurrentoperations-ndbd-table6390860
Ref: ndbparam-ndbd-maxnooflocaloperations6394483
Ref: maxnooflocaloperations-ndbd-table6394510
Ref: ndbparam-ndbd-maxdmloperationspertransaction6395218
Ref: maxdmloperationspertransaction-ndbd-table6395253
Ref: mysql-cluster-transaction-temporary-storage6396012
Ref: ndbparam-ndbd-maxnoofconcurrentindexoperations6396632
Ref: maxnoofconcurrentindexoperations-ndbd-table6396669
Ref: ndbparam-ndbd-maxnooffiredtriggers6397862
Ref: maxnooffiredtriggers-ndbd-table6397887
Ref: ndbparam-ndbd-transactionbuffermemory6399087
Ref: transactionbuffermemory-ndbd-table6399115
Ref: mysql-cluster-scans-and-buffering6400298
Ref: ndbparam-ndbd-maxnoofconcurrentscans6400791
Ref: maxnoofconcurrentscans-ndbd-table6400818
Ref: ndbparam-ndbd-maxnooflocalscans6402360
Ref: maxnooflocalscans-ndbd-table6402382
Ref: ndbparam-ndbd-batchsizeperlocalscan6403161
Ref: batchsizeperlocalscan-ndbd-table6403187
Ref: ndbparam-ndbd-longmessagebuffer6403802
Ref: longmessagebuffer-ndbd-table6403824
Ref: ndbparam-ndbd-maxparallelscansperfragment6404342
Ref: maxparallelscansperfragment-ndbd-table6404374
Ref: mysql-cluster-memory-allocation6405134
Ref: ndbparam-ndbd-maxallocate6405157
Ref: maxallocate-ndbd-table6405172
Ref: mysql-cluster-hash-map-size6405995
Ref: ndbparam-ndbd-defaulthashmapsize6406014
Ref: defaulthashmapsize-ndbd-table6406036
Ref: mysql-cluster-defaulthashmapsize-table6406852
Ref: mysql-cluster-logging-and-checkpointing6408789
Ref: ndbparam-ndbd-nooffragmentlogfiles6408893
Ref: nooffragmentlogfiles-ndbd-table6408918
Ref: ndbparam-ndbd-fragmentlogfilesize6411274
Ref: fragmentlogfilesize-ndbd-table6411298
Ref: ndbparam-ndbd-initfragmentlogfiles6412313
Ref: initfragmentlogfiles-ndbd-table6412338
Ref: ndbparam-ndbd-maxnoofopenfiles6413558
Ref: maxnoofopenfiles-ndbd-table6413579
Ref: ndbparam-ndbd-initialnoofopenfiles6414190
Ref: initialnoofopenfiles-ndbd-table6414215
Ref: ndbparam-ndbd-maxnoofsavedmessages6414670
Ref: maxnoofsavedmessages-ndbd-table6414695
Ref: ndbparam-ndbd-maxlcpstartdelay6415241
Ref: maxlcpstartdelay-ndbd-table6415262
Ref: mysql-cluster-metadata-objects6416894
Ref: ndbparam-ndbd-maxnoofattributes6417250
Ref: maxnoofattributes-ndbd-table6417272
Ref: ndbparam-ndbd-maxnooftables6419746
Ref: maxnooftables-ndbd-table6419764
Ref: ndbparam-ndbd-maxnooforderedindexes6421332
Ref: maxnooforderedindexes-ndbd-table6421358
Ref: ndbparam-ndbd-maxnoofuniquehashindexes6422364
Ref: maxnoofuniquehashindexes-ndbd-table6422393
Ref: ndbparam-ndbd-maxnooftriggers6423285
Ref: maxnooftriggers-ndbd-table6423305
Ref: ndbparam-ndbd-maxnoofindexes6424144
Ref: ndbparam-ndbd-maxnoofsubscriptions6424564
Ref: maxnoofsubscriptions-ndbd-table6424589
Ref: ndbparam-ndbd-maxnoofsubscribers6425380
Ref: maxnoofsubscribers-ndbd-table6425403
Ref: ndbparam-ndbd-maxnoofconcurrentsuboperations6426820
Ref: maxnoofconcurrentsuboperations-ndbd-table6426855
Ref: mysql-cluster-boolean-parameters6427562
Ref: ndbparam-ndbd-lockpagesinmainmemory6427809
Ref: lockpagesinmainmemory-ndbd-table6427835
Ref: ndbparam-ndbd-stoponerror6430560
Ref: stoponerror-ndbd-table6430576
Ref: ndbparam-ndbd-crashoncorruptedtuple6431092
Ref: crashoncorruptedtuple-ndbd-table6431118
Ref: ndbparam-ndbd-diskless6431824
Ref: diskless-ndbd-table6431837
Ref: ndbparam-ndbd-odirect6432953
Ref: odirect-ndbd-table6432965
Ref: ndbparam-ndbd-restartonerrorinsert6433601
Ref: restartonerrorinsert-ndbd-table6433626
Ref: ndbparam-ndbd-compressedbackup6434177
Ref: compressedbackup-ndbd-table6434198
Ref: ndbparam-ndbd-compressedlcp6435135
Ref: compressedlcp-ndbd-table6435153
Ref: mysql-cluster-timeouts-intervals-disk-paging6436103
Ref: ndbparam-ndbd-timebetweenwatchdogcheck6436399
Ref: timebetweenwatchdogcheck-ndbd-table6436428
Ref: ndbparam-ndbd-timebetweenwatchdogcheckinitial6437350
Ref: timebetweenwatchdogcheckinitial-ndbd-table6437386
Ref: ndbparam-ndbd-startpartialtimeout6438059
Ref: startpartialtimeout-ndbd-table6438083
Ref: ndbparam-ndbd-startpartitionedtimeout6438910
Ref: startpartitionedtimeout-ndbd-table6438938
Ref: ndbparam-ndbd-startfailuretimeout6439722
Ref: startfailuretimeout-ndbd-table6439746
Ref: ndbparam-ndbd-startnonodegrouptimeout6440695
Ref: startnonodegrouptimeout-ndbd-table6440723
Ref: ndbparam-ndbd-heartbeatintervaldbdb6441871
Ref: heartbeatintervaldbdb-ndbd-table6441897
Ref: ndbparam-ndbd-heartbeatintervaldbapi6443226
Ref: heartbeatintervaldbapi-ndbd-table6443253
Ref: ndbparam-ndbd-heartbeatorder6444428
Ref: heartbeatorder-ndbd-table6444447
Ref: ndbparam-ndbd-connectcheckintervaldelay6449305
Ref: connectcheckintervaldelay-ndbd-table6449335
Ref: ndbparam-ndbd-timebetweenlocalcheckpoints6450078
Ref: timebetweenlocalcheckpoints-ndbd-table6450110
Ref: ndbparam-ndbd-timebetweenglobalcheckpoints6451648
Ref: timebetweenglobalcheckpoints-ndbd-table6451681
Ref: ndbparam-ndbd-timebetweenepochs6453152
Ref: timebetweenepochs-ndbd-table6453174
Ref: ndbparam-ndbd-timebetweenepochstimeout6453810
Ref: timebetweenepochstimeout-ndbd-table6453839
Ref: ndbparam-ndbd-maxbufferedepochs6455213
Ref: maxbufferedepochs-ndbd-table6455235
Ref: ndbparam-ndbd-maxbufferedepochbytes6456501
Ref: maxbufferedepochbytes-ndbd-table6456527
Ref: ndbparam-ndbd-timebetweeninactivetransactionabortcheck6457524
Ref: timebetweeninactivetransactionabortcheck-ndbd-table6457569
Ref: ndbparam-ndbd-transactioninactivetimeout6458242
Ref: transactioninactivetimeout-ndbd-table6458273
Ref: ndbparam-ndbd-transactiondeadlockdetectiontimeout6459020
Ref: transactiondeadlockdetectiontimeout-ndbd-table6459060
Ref: ndbparam-ndbd-disksyncsize6460157
Ref: disksyncsize-ndbd-table6460174
Ref: ndbparam-ndbd-diskcheckpointspeed6460976
Ref: diskcheckpointspeed-ndbd-table6461000
Ref: ndbparam-ndbd-diskcheckpointspeedinrestart6461764
Ref: diskcheckpointspeedinrestart-ndbd-table6461797
Ref: ndbparam-ndbd-noofdiskpagestodiskafterrestarttup6462321
Ref: ndbparam-ndbd-noofdiskpagestodiskafterrestartacc6462534
Ref: ndbparam-ndbd-noofdiskpagestodiskduringrestarttup6462747
Ref: ndbparam-ndbd-noofdiskpagestodiskduringrestartacc6462974
Ref: ndbparam-ndbd-arbitrationtimeout6463201
Ref: arbitrationtimeout-ndbd-table6463224
Ref: ndbparam-ndbd-arbitration6463895
Ref: arbitration-ndbd-table6463911
Ref: mysql-cluster-buffering-and-logging6466080
Ref: ndbparam-ndbd-undoindexbuffer6466588
Ref: undoindexbuffer-ndbd-table6466608
Ref: ndbparam-ndbd-undodatabuffer6468646
Ref: undodatabuffer-ndbd-table6468665
Ref: ndbparam-ndbd-redobuffer6470245
Ref: redobuffer-ndbd-table6470260
Ref: mysql-cluster-controlling-log-messages6471387
Ref: ndbparam-ndbd-loglevelstartup6472172
Ref: loglevelstartup-ndbd-table6472192
Ref: ndbparam-ndbd-loglevelshutdown6472625
Ref: loglevelshutdown-ndbd-table6472646
Ref: ndbparam-ndbd-loglevelstatistic6473089
Ref: loglevelstatistic-ndbd-table6473111
Ref: ndbparam-ndbd-loglevelcheckpoint6473646
Ref: loglevelcheckpoint-ndbd-table6473669
Ref: ndbparam-ndbd-loglevelnoderestart6474107
Ref: loglevelnoderestart-ndbd-table6474131
Ref: ndbparam-ndbd-loglevelconnection6474553
Ref: loglevelconnection-ndbd-table6474576
Ref: ndbparam-ndbd-loglevelerror6475019
Ref: loglevelerror-ndbd-table6475037
Ref: ndbparam-ndbd-loglevelcongestion6475577
Ref: loglevelcongestion-ndbd-table6475600
Ref: ndbparam-ndbd-loglevelinfo6476107
Ref: loglevelinfo-ndbd-table6476124
Ref: ndbparam-ndbd-memreportfrequency6476579
Ref: memreportfrequency-ndbd-table6476602
Ref: ndbparam-ndbd-startupstatusreportfrequency6478200
Ref: startupstatusreportfrequency-ndbd-table6478233
Ref: ndbparam-ndbd-dicttrace6479889
Ref: mysql-cluster-backup-parameters6480240
Ref: ndbparam-ndbd-backupdatabuffersize6480380
Ref: backupdatabuffersize-ndbd-table6480405
Ref: ndbparam-ndbd-backuplogbuffersize6481356
Ref: backuplogbuffersize-ndbd-table6481380
Ref: ndbparam-ndbd-backupmemory6482937
Ref: backupmemory-ndbd-table6482954
Ref: ndbparam-ndbd-backupreportfrequency6483692
Ref: backupreportfrequency-ndbd-table6483718
Ref: ndbparam-ndbd-backupwritesize6484484
Ref: backupwritesize-ndbd-table6484504
Ref: ndbparam-ndbd-backupmaxwritesize6485002
Ref: backupmaxwritesize-ndbd-table6485025
Ref: mysql-cluster-realtime-performance-parameters6485885
Ref: ndbparam-ndbd-lockexecutethreadtocpu6486183
Ref: lockexecutethreadtocpu-ndbd-table6486210
Ref: ndbparam-ndbd-lockmaintthreadstocpu6487444
Ref: lockmaintthreadstocpu-ndbd-table6487470
Ref: ndbparam-ndbd-realtimescheduler6488069
Ref: realtimescheduler-ndbd-table6488091
Ref: ndbparam-ndbd-schedulerexecutiontimer6488784
Ref: schedulerexecutiontimer-ndbd-table6488812
Ref: ndbparam-ndbd-schedulerspintimer6489575
Ref: schedulerspintimer-ndbd-table6489598
Ref: ndbparam-ndbd-buildindexthreads6490074
Ref: buildindexthreads-ndbd-table6490096
Ref: ndbparam-ndbd-twopassinitialnoderestartcopy6491235
Ref: twopassinitialnoderestartcopy-ndbd-table6491269
Ref: ndbparam-ndbd-numa6491906
Ref: numa-ndbd-table6491915
Ref: mysql-cluster-ndbd-definition-ndbmtd-parameters6492861
Ref: ndbparam-ndbmtd-maxnoofexecutionthreads6493611
Ref: maxnoofexecutionthreads-ndbmtd-table6493639
Ref: ndbparam-ndbmtd-nooffragmentlogparts6499461
Ref: nooffragmentlogparts-ndbmtd-table6499486
Ref: ndbparam-ndbmtd-threadconfig6500389
Ref: threadconfig-ndbmtd-table6500406
Ref: mysql-cluster-ndbd-definition-disk-data-parameters6506582
Ref: ndbparam-ndbd-diskpagebuffermemory6506701
Ref: diskpagebuffermemory-ndbd-table6506726
Ref: ndbparam-ndbd-sharedglobalmemory6507775
Ref: sharedglobalmemory-ndbd-table6507798
Ref: ndbparam-ndbd-diskiothreadpool6509052
Ref: diskiothreadpool-ndbd-table6509073
Ref: mysql-cluster-ndbd-disk-data-filesystem-parameters6511079
Ref: ndbparam-ndbd-filesystempathdd6511299
Ref: filesystempathdd-ndbd-table6511320
Ref: ndbparam-ndbd-filesystempathdatafiles6513045
Ref: filesystempathdatafiles-ndbd-table6513073
Ref: ndbparam-ndbd-filesystempathundofiles6514536
Ref: filesystempathundofiles-ndbd-table6514564
Ref: mysql-cluster-ndbd-disk-data-object-creation-parameters6516118
Ref: ndbparam-ndbd-initiallogfilegroup6516371
Ref: initiallogfilegroup-ndbd-table6516395
Ref: ndbparam-ndbd-initialtablespace6519455
Ref: initialtablespace-ndbd-table6519477
Ref: mysql-cluster-ndbd-definition-gcp-stop-errors6522162
Ref: ndbparam-ndbd-extrasendbuffermemory6524244
Ref: ndbparam-ndbd-totalsendbuffermemory6524548
Ref: ndbparam-ndbd-reservedsendbuffermemory6525068
Ref: mysql-cluster-redo-over-commit-handling6525688
Ref: ndbparam-ndbd-redoovercommitcounter6526444
Ref: redoovercommitcounter-ndbd-table6526470
Ref: ndbparam-ndbd-redoovercommitlimit6527335
Ref: redoovercommitlimit-ndbd-table6527359
Ref: ndbparam-ndbd-startfailretrydelay6529088
Ref: startfailretrydelay-ndbd-table6529111
Ref: ndbparam-ndbd-maxstartfailretries6529643
Ref: maxstartfailretries-ndbd-table6529666
Node: mysql-cluster-api-definition6530186
Ref: ndbparam-api-id6531413
Ref: id-api-table6531420
Ref: ndbparam-api-nodeid6532565
Ref: nodeid-api-table6532576
Ref: ndbparam-api-executeoncomputer6533852
Ref: executeoncomputer-api-table6533874
Ref: ndbparam-api-hostname6534325
Ref: hostname-api-table6534338
Ref: ndbparam-api-arbitrationrank6535360
Ref: arbitrationrank-api-table6535380
Ref: ndbparam-api-arbitrationdelay6536540
Ref: arbitrationdelay-api-table6536561
Ref: ndbparam-api-batchbytesize6537132
Ref: batchbytesize-api-table6537150
Ref: ndbparam-api-batchsize6538102
Ref: batchsize-api-table6538116
Ref: ndbparam-api-extrasendbuffermemory6538684
Ref: extrasendbuffermemory-api-table6538710
Ref: ndbparam-api-heartbeatthreadpriority6539312
Ref: heartbeatthreadpriority-api-table6539340
Ref: ndbparam-api-maxscanbatchsize6540137
Ref: maxscanbatchsize-api-table6540158
Ref: ndbparam-api-totalsendbuffermemory6540850
Ref: totalsendbuffermemory-api-table6540876
Ref: ndbparam-api-autoreconnect6541744
Ref: autoreconnect-api-table6541762
Ref: ndbparam-api-defaultoperationredoproblemaction6542882
Ref: defaultoperationredoproblemaction-api-table6542920
Ref: ndbparam-api-defaulthashmapsize6544275
Ref: defaulthashmapsize-api-table6544298
Node: mysql-cluster-tcp-definition6548579
Ref: ndbparam-tcp-nodeid16550116
Ref: nodeid1-tcp-table6550127
Ref: ndbparam-tcp-nodeid26550425
Ref: nodeid2-tcp-table6550441
Ref: ndbparam-tcp-hostname16551035
Ref: hostname1-tcp-table6551048
Ref: ndbparam-tcp-hostname26551408
Ref: hostname2-tcp-table6551426
Ref: ndbparam-tcp-overloadlimit6552034
Ref: overloadlimit-tcp-table6552052
Ref: ndbparam-tcp-sendbuffermemory6552965
Ref: sendbuffermemory-tcp-table6552986
Ref: ndbparam-tcp-sendsignalid6554305
Ref: sendsignalid-tcp-table6554322
Ref: ndbparam-tcp-checksum6554931
Ref: checksum-tcp-table6554944
Ref: ndbparam-tcp-portnumber6555649
Ref: ndbparam-tcp-receivebuffermemory6555924
Ref: receivebuffermemory-tcp-table6555948
Ref: ndbparam-tcp-tcp_rcv_buf_size6556484
Ref: tcp_rcv_buf_size-tcp-table6556505
Ref: ndbparam-tcp-tcp_snd_buf_size6556977
Ref: tcp_snd_buf_size-tcp-table6556998
Node: mysql-cluster-tcp-definition-direct6557462
Node: mysql-cluster-shm-definition6559353
Ref: ndbparam-shm-nodeid16560499
Ref: nodeid1-shm-table6560511
Ref: ndbparam-shm-nodeid26560819
Ref: nodeid2-shm-table6560835
Ref: ndbparam-shm-hostname16561297
Ref: hostname1-shm-table6561311
Ref: ndbparam-shm-hostname26561681
Ref: hostname2-shm-table6561699
Ref: ndbparam-shm-shmkey6562317
Ref: shmkey-shm-table6562328
Ref: ndbparam-shm-shmsize6562847
Ref: shmsize-shm-table6562859
Ref: ndbparam-shm-sendsignalid6563400
Ref: sendsignalid-shm-table6563417
Ref: ndbparam-shm-checksum6564071
Ref: checksum-shm-table6564084
Ref: ndbparam-shm-signum6564777
Ref: signum-shm-table6564788
Node: mysql-cluster-sci-definition6565761
Ref: ndbparam-sci-nodeid16567162
Ref: nodeid1-sci-table6567174
Ref: ndbparam-sci-nodeid26567472
Ref: nodeid2-sci-table6567488
Ref: ndbparam-sci-host1sciid06567940
Ref: host1sciid0-sci-table6567956
Ref: ndbparam-sci-host1sciid16568362
Ref: host1sciid1-sci-table6568378
Ref: ndbparam-sci-host2sciid06568927
Ref: host2sciid0-sci-table6568943
Ref: ndbparam-sci-host2sciid16569350
Ref: host2sciid1-sci-table6569366
Ref: ndbparam-sci-hostname16569810
Ref: hostname1-sci-table6569824
Ref: ndbparam-sci-hostname26570184
Ref: hostname2-sci-table6570202
Ref: ndbparam-sci-sharedbuffersize6570810
Ref: sharedbuffersize-sci-table6570831
Ref: ndbparam-sci-sendlimit6571592
Ref: sendlimit-sci-table6571606
Ref: ndbparam-sci-sendsignalid6572246
Ref: sendsignalid-sci-table6572263
Ref: ndbparam-sci-checksum6572853
Ref: checksum-sci-table6572866
Ref: ndbparam-sci-overloadlimit6573544
Ref: overloadlimit-sci-table6573562
Node: mysql-cluster-config-send-buffers6574057
Node: mysql-cluster-params-overview6577765
Node: mysql-cluster-params-ndbd6581188
Ref: ndbparam-summary-table-ndbd6582825
Ref: ndbparam-summary-table-ndbmtd6609819
Node: mysql-cluster-params-mgmd6611029
Ref: ndbparam-summary-table-mgmd6612292
Node: mysql-cluster-params-api6616661
Ref: ndbparam-summary-table-api6618186
Node: mysql-cluster-params-other6623118
Ref: ndbparam-summary-table-computer6624441
Ref: ndbparam-summary-table-tcp6625474
Ref: ndbparam-summary-table-shm6629198
Ref: ndbparam-summary-table-sci6632090
Node: mysql-cluster-options-variables6635601
Node: mysql-cluster-option-tables6636618
Ref: mysql-cluster-mysqld-optvars-table6637255
Node: mysql-cluster-program-options-mysqld6677636
Ref: option_mysqld_ndb-batch-size6678824
Ref: option_mysqld_ndb-cluster-connection-pool6679556
Ref: option_mysqld_ndb-blob-read-batch-bytes6682447
Ref: option_mysqld_ndb-blob-write-batch-bytes6684150
Ref: option_mysqld_ndb-connectstring6685873
Ref: option_mysqld_ndb-deferred-constraints6686473
Ref: option_mysqld_ndb-distribution6687539
Ref: option_mysqld_ndb-mgmd-host6688485
Ref: option_mysqld_ndbcluster6689190
Ref: option_mysqld_ndb-log-apply-status6689980
Ref: option_mysqld_ndb-log-orig6691663
Ref: option_mysqld_ndb-log-transaction-id6692517
Ref: option_mysqld_ndb-nodeid6693915
Ref: option_mysqld_ndb-log-empty-epochs6695548
Ref: option_mysqld_server-id-bits6696868
Ref: option_mysqld_skip-ndbcluster6698835
Ref: option_mysqld_ndb-transid-mysql-connection-map6699429
Ref: option_mysqld_ndb-wait-connected6700711
Ref: option_mysqld_ndb-wait-setup6702442
Ref: option_mysqld_ndb_optimization_delay6704185
Node: mysql-cluster-system-variables6704906
Ref: sysvar_have_ndbcluster6705517
Ref: sysvar_multi_range_count6706147
Ref: sysvar_ndb_autoincrement_prefetch_sz6707489
Ref: sysvar_ndb_cache_check_time6709200
Ref: sysvar_ndb_deferred_constraints6710369
Ref: sysvar_ndb_distribution6711382
Ref: sysvar_ndb_extra_logging6712326
Ref: sysvar_ndb_force_send6713819
Ref: sysvar_ndb_index_stat_cache_entries6714556
Ref: sysvar_ndb_index_stat_enable6715455
Ref: sysvar_ndb_index_stat_update_freq6715964
Ref: sysvar_ndb_join_pushdown6716832
Ref: sysvar_ndb_log_apply_status6723090
Ref: sysvar_ndb_log_bin6723797
Ref: sysvar_ndb_log_binlog_index6724661
Ref: sysvar_ndb_log_orig6725635
Ref: sysvar_ndb_log_transaction_id6726341
Ref: sysvar_ndb_optimized_node_selection6727386
Ref: sysvar_ndb_report_thresh_binlog_epoch_slip6730101
Ref: sysvar_ndb_report_thresh_binlog_mem_usage6731022
Ref: sysvar_slave_allow_batching6731898
Ref: sysvar_ndb_table_no_logging6732936
Ref: sysvar_ndb_table_temporary6735020
Ref: sysvar_ndb_use_copying_alter_table6735810
Ref: sysvar_ndb_use_exact_count6736317
Ref: sysvar_ndb_use_transactions6737079
Ref: sysvar_transaction_allow_batching6737875
Ref: sysvar_ndbinfo_database6739537
Ref: sysvar_ndbinfo_max_bytes6740334
Ref: sysvar_ndbinfo_max_rows6740942
Ref: sysvar_ndbinfo_show_hidden6741546
Ref: sysvar_ndbinfo_table_prefix6742292
Ref: sysvar_ndbinfo_version6743324
Ref: sysvar_ndb_log_empty_epochs6743841
Ref: sysvar_server_id_bits6744628
Node: mysql-cluster-status-variables6745684
Ref: statvar_Handler_discover6746212
Ref: statvar_Ndb_api_wait_exec_complete_count_session6746514
Ref: statvar_Ndb_api_wait_exec_complete_count_slave6747296
Ref: statvar_Ndb_api_wait_exec_complete_count6748105
Ref: statvar_Ndb_api_wait_scan_result_count_session6748805
Ref: statvar_Ndb_api_wait_scan_result_count_slave6749412
Ref: statvar_Ndb_api_wait_scan_result_count6750040
Ref: statvar_Ndb_api_wait_meta_request_count_session6750565
Ref: statvar_Ndb_api_wait_meta_request_count_slave6751164
Ref: statvar_Ndb_api_wait_meta_request_count6751789
Ref: statvar_Ndb_api_wait_nanos_count_session6752311
Ref: statvar_Ndb_api_wait_nanos_count_slave6752815
Ref: statvar_Ndb_api_wait_nanos_count6753345
Ref: statvar_Ndb_api_bytes_sent_count_session6753767
Ref: statvar_Ndb_api_bytes_sent_count_slave6754235
Ref: statvar_Ndb_api_bytes_sent_count6754724
Ref: statvar_Ndb_api_bytes_received_count_session6755110
Ref: statvar_Ndb_api_bytes_received_count_slave6755588
Ref: statvar_Ndb_api_bytes_received_count6756092
Ref: statvar_Ndb_api_trans_start_count_session6756488
Ref: statvar_Ndb_api_trans_start_count_slave6756938
Ref: statvar_Ndb_api_trans_start_count6757414
Ref: statvar_Ndb_api_trans_commit_count_session6757782
Ref: statvar_Ndb_api_trans_commit_count_slave6758235
Ref: statvar_Ndb_api_trans_commit_count6758714
Ref: statvar_Ndb_api_trans_abort_count_session6759090
Ref: statvar_Ndb_api_trans_abort_count_slave6759540
Ref: statvar_Ndb_api_trans_abort_count6760016
Ref: statvar_Ndb_api_trans_close_count_session6760384
Ref: statvar_Ndb_api_trans_close_count_slave6761025
Ref: statvar_Ndb_api_trans_close_count6761682
Ref: statvar_Ndb_api_pk_op_count_session6762219
Ref: statvar_Ndb_api_pk_op_count_slave6762847
Ref: statvar_Ndb_api_pk_op_count6763501
Ref: statvar_Ndb_api_uk_op_count_session6764047
Ref: statvar_Ndb_api_uk_op_count_slave6764516
Ref: statvar_Ndb_api_uk_op_count6765011
Ref: statvar_Ndb_api_table_scan_count_session6765398
Ref: statvar_Ndb_api_table_scan_count_slave6765903
Ref: statvar_Ndb_api_table_scan_count6766434
Ref: statvar_Ndb_api_range_scan_count_session6766857
Ref: statvar_Ndb_api_range_scan_count_slave6767325
Ref: statvar_Ndb_api_range_scan_count6767814
Ref: statvar_Ndb_api_pruned_scan_count_session6768200
Ref: statvar_Ndb_api_pruned_scan_count_slave6768684
Ref: statvar_Ndb_api_pruned_scan_count6769194
Ref: statvar_Ndb_api_scan_batch_count_session6769596
Ref: statvar_Ndb_api_scan_batch_count_slave6770122
Ref: statvar_Ndb_api_scan_batch_count6770674
Ref: statvar_Ndb_api_read_row_count_session6771123
Ref: statvar_Ndb_api_read_row_count_slave6771697
Ref: statvar_Ndb_api_read_row_count6772289
Ref: statvar_Ndb_api_trans_local_read_row_count_session6772790
Ref: statvar_Ndb_api_trans_local_read_row_count_slave6773376
Ref: statvar_Ndb_api_trans_local_read_row_count6773980
Ref: statvar_Ndb_api_event_data_count_injector6774493
Ref: statvar_Ndb_api_event_data_count6774882
Ref: statvar_Ndb_api_event_nondata_count_injector6775260
Ref: statvar_Ndb_api_event_nondata_count6775672
Ref: statvar_Ndb_api_event_bytes_count_injector6776073
Ref: statvar_Ndb_api_event_bytes_count6776461
Ref: statvar_Ndb_cluster_node_id6776838
Ref: statvar_Ndb_config_from_host6777082
Ref: statvar_Ndb_config_from_port6777413
Ref: statvar_Ndb_conflict_fn_max6777760
Ref: statvar_Ndb_conflict_fn_old6778173
Ref: statvar_Ndb_conflict_fn_epoch6778570
Ref: statvar_Ndb_conflict_fn_epoch_trans6778945
Ref: statvar_Ndb_conflict_trans_row_conflict_count6779332
Ref: statvar_Ndb_conflict_trans_row_reject_count6779945
Ref: statvar_Ndb_conflict_trans_reject_count6780439
Ref: statvar_Ndb_conflict_trans_detect_iter_count6780769
Ref: statvar_Ndb_conflict_trans_conflict_commit_count6781159
Ref: statvar_Ndb_execute_count6781479
Ref: statvar_Ndb_number_of_data_nodes6781614
Ref: statvar_Ndb_pushed_queries_defined6781867
Ref: statvar_Ndb_pushed_queries_dropped6782164
Ref: statvar_Ndb_pushed_queries_executed6782342
Ref: statvar_Ndb_pushed_reads6782525
Ref: statvar_Ndb_pruned_scan_count6782858
Ref: statvar_Ndb_scan_count6783354
Node: mysql-cluster-interconnects6783535
Node: mysql-cluster-sci-sockets6786161
Node: mysql-cluster-interconnects-performance6787450
Node: mysql-cluster-programs6791681
Node: mysql-cluster-programs-ndbd6795541
Ref: mysql-cluster-ndbd-options-table6796736
Ref: option_ndbd_bind-address6800695
Ref: option_ndbd_daemon6801191
Ref: option_ndbd_nodaemon6801979
Ref: option_ndbd_foreground6802842
Ref: option_ndbd_initial6803568
Ref: option_ndbd_initial-start6805986
Ref: option_ndbd_nowait-nodes6807326
Ref: option_ndbd_nostart6808694
Ref: option_ndbd_install6809617
Ref: option_ndbd_remove6811213
Ref: option_ndbd_connect-retries6811868
Ref: option_ndbd_connect-delay6812731
Node: mysql-cluster-programs-ndbinfo-select-all6819071
Ref: mysql-cluster-ndbinfo_select_all-options-table6822334
Ref: option_ndbinfo_select_all_delay6823501
Ref: option_ndbinfo_select_all_loops6824031
Node: mysql-cluster-programs-ndbmtd6824600
Node: mysql-cluster-programs-ndb-mgmd6830482
Ref: mysql-cluster-ndb_mgmd-options-table6831431
Ref: option_ndb_mgmd_bind-address6836252
Ref: option_ndb_mgmd_no-nodeid-checks6837068
Ref: option_ndb_mgmd_configdir6837450
Ref: option_ndb_mgmd_config-cache6837970
Ref: option_ndb_mgmd_skip_config-cache6838478
Ref: option_ndb_mgmd_config-file6840856
Ref: option_ndb_mgmd_mycnf6842612
Ref: option_ndb_mgmd_daemon6842970
Ref: option_ndb_mgmd_interactive6843581
Ref: option_ndb_mgmd_initial6844198
Ref: option_ndb_mgmd_log-name6846278
Ref: option_ndb_mgmd_nodaemon6846669
Ref: option_ndb_mgmd_print-full-config6847273
Ref: option_ndb_mgmd_reload6848081
Ref: option_ndb_mgmd_nowait-nodes6849804
Ref: option_ndb_mgmd_install6856443
Ref: option_ndb_mgmd_remove6857972
Node: mysql-cluster-programs-ndb-mgm6858637
Ref: mysql-cluster-ndb_mgm-options-table6860098
Ref: option_ndb_mgm_execute6860818
Ref: option_ndb_mgm_try-reconnect6861834
Node: mysql-cluster-programs-ndb-blob-tool6862626
Ref: mysql-cluster-ndb_blob_tool-options-table6864806
Ref: option_ndb_blob_tool_check-orphans6865985
Ref: option_ndb_blob_tool_database6866374
Ref: option_ndb_blob_tool_delete-orphans6866800
Ref: option_ndb_blob_tool_dump-file6867191
Ref: option_ndb_blob_tool_verbose6867737
Node: mysql-cluster-programs-ndb-config6870126
Ref: mysql-cluster-ndb_config-options-table6871768
Ref: option_ndb_config_usage6875548
Ref: option_ndb_config_config_from_node6875907
Ref: option_ndb_config_version6876656
Ref: option_ndb_config_ndb-connectstring6876967
Ref: option_ndb_config_config-file6877715
Ref: option_ndb_config_mycnf6878417
Ref: option_ndb_config_query6878775
Ref: option_ndb_config_host6879827
Ref: option_ndb_config_id6881048
Ref: option_ndb_config_nodeid6881065
Ref: option_ndb_config_nodes6881570
Ref: option_ndb_config_connections6882096
Ref: option_ndb_config_system6882602
Ref: option_ndb_config_type6883106
Ref: option_ndb_config_fields6883714
Ref: option_ndb_config_rows6884359
Ref: option_ndb_config_configinfo6884986
Ref: option_ndb_config_xml6886732
Node: mysql-cluster-programs-ndb-cpcd6894004
Node: mysql-cluster-programs-ndb-delete-all6894578
Ref: mysql-cluster-ndb_delete_all-options-table6895694
Ref: option_ndb_delete_all_transactional6896729
Node: mysql-cluster-programs-ndb-desc6897000
Ref: mysql-cluster-ndb_desc-options-table6905279
Ref: option_ndb_desc_blob-info6907385
Ref: option_ndb_desc_database6907613
Ref: option_ndb_desc_extra-node-info6907710
Ref: option_ndb_desc_extra-partition-info6908140
Ref: option_ndb_desc_retries6908243
Ref: option_ndb_desc_table6908370
Ref: option_ndb_desc_unqualified6908513
Node: mysql-cluster-programs-ndb-drop-index6908572
Ref: mysql-cluster-ndb_drop_index-options-table6909657
Node: mysql-cluster-programs-ndb-drop-table6911759
Ref: mysql-cluster-ndb_drop_table-options-table6912931
Node: mysql-cluster-programs-ndb-error-reporter6913460
Ref: mysql-cluster-ndb_error_reporter-options-table6914471
Ref: option_ndb_error_reporter_fs6915654
Node: mysql-cluster-programs-ndb-index-stat6916238
Ref: mysql-cluster-ndb_index_stat-options-table6918360
Ref: ndb-index-stat-options-statistics6922000
Ref: option_ndb_index_stat_database6922213
Ref: option_ndb_index_stat_delete6922702
Ref: option_ndb_index_stat_update6923169
Ref: option_ndb_index_stat_dump6923635
Ref: option_ndb_index_stat_query6924023
Ref: ndb-index-stat-options-system6924499
Ref: option_ndb_index_stat_sys-drop6924702
Ref: option_ndb_index_stat_sys-create6925168
Ref: option_ndb_index_stat_sys-create-if-not-exist6925651
Ref: option_ndb_index_stat_sys-create-if-not-valid6926176
Ref: option_ndb_index_stat_sys-check6926702
Ref: option_ndb_index_stat_sys-skip-tables6927158
Ref: option_ndb_index_stat_sys-skip-events6927602
Ref: option_ndb_index_stat_verbose6928035
Ref: option_ndb_index_stat_loops6928461
Node: mysql-cluster-programs-ndb-print-backup-file6928915
Node: mysql-cluster-programs-ndb-print-schema-file6930535
Node: mysql-cluster-programs-ndb-print-sys-file6931936
Node: mysql-cluster-programs-ndbd-redo-log-reader6933621
Ref: mysql-cluster-ndbd_redo_log_reader-options-table6934976
Ref: option_ndbd_redo_log_reader_noprint6936539
Ref: option_ndbd_redo_log_reader_nocheck6936890
Node: mysql-cluster-programs-ndb-restore6937611
Ref: mysql-cluster-ndb_restore-options-table6939223
Ref: option_ndb_restore_connect6949929
Ref: option_ndb_restore_nodeid6951075
Ref: option_ndb_restore_skip-table-check6951771
Ref: option_ndb_restore_promote-attributes6952905
Ref: option_ndb_restore_lossy-conversions6954462
Ref: option_ndb_restore_preserve-trailing-spaces6955390
Ref: option_ndb_restore_backupid6956120
Ref: option_ndb_restore_restore_epoch6956655
Ref: option_ndb_restore_restore_data6957080
Ref: option_ndb_restore_restore_meta6957234
Ref: option_ndb_restore_restore-privilege-tables6957538
Ref: option_ndb_restore_backup_path6958024
Ref: option_ndb_restore_no-upgrade6960541
Ref: option_ndb_restore_print_data6960938
Ref: option_ndb_restore_tab6961524
Ref: option_ndb_restore_fields-enclosed-by6961943
Ref: option_ndb_restore_fields-optionally-enclosed-by6962418
Ref: option_ndb_restore_fields-terminated-by6963044
Ref: option_ndb_restore_hex6963571
Ref: option_ndb_restore_lines-terminated-by6963782
Ref: option_ndb_restore_append6964306
Ref: option_ndb_restore_print_meta6964739
Ref: option_ndb_restore_print_log6964867
Ref: option_ndb_restore_print6965003
Ref: option_ndb_restore_dont_ignore_systab_06965542
Ref: option_ndb_restore_ndb-nodegroup-map6965958
Ref: option_ndb_restore_no-binlog6966160
Ref: option_ndb_restore_no-restore-disk-objects6966330
Ref: option_ndb_restore_parallelism6966605
Ref: option_ndb_restore_progress-frequency6966830
Ref: option_ndb_restore_verbose6967005
Ref: option_ndb_restore_include-databases6967504
Ref: option_ndb_restore_include-tables6967806
Ref: option_ndb_restore_exclude-databases6970617
Ref: option_ndb_restore_exclude-tables6970919
Ref: option_ndb_restore_exclude-missing-columns6975304
Ref: option_ndb_restore_disable-indexes6976054
Ref: option_ndb_restore_rebuild-indexes6976454
Ref: option_ndb_restore_skip-broken-objects6976740
Ref: option_ndb_restore_skip-unknown-objects6977192
Ref: option_ndb_restore_rewrite-database6977630
Node: mysql-cluster-programs-ndb-select-all6980493
Ref: mysql-cluster-ndb_select_all-options-table6981406
Ref: option_ndb_select_all_database6984304
Ref: option_ndb_select_all_parallelism6984437
Ref: option_ndb_select_all_lock6984511
Ref: option_ndb_select_all_order6984785
Ref: option_ndb_select_all_descending6985027
Ref: option_ndb_select_all_header6985182
Ref: option_ndb_select_all_useHexFormat6985253
Ref: option_ndb_select_all_delimiter6985448
Ref: option_ndb_select_all_disk6985668
Ref: option_ndb_select_all_rowid6985815
Ref: option_ndb_select_all_gci6985933
Ref: option_ndb_select_all_tupscan6986177
Ref: option_ndb_select_all_nodata6986251
Node: mysql-cluster-programs-ndb-select-count6988370
Ref: mysql-cluster-ndb_select_count-options-table6989449
Node: mysql-cluster-programs-ndb-show-tables6990747
Ref: mysql-cluster-ndb_show_tables-options-table6991815
Ref: option_ndb_show_tables_database6993380
Ref: option_ndb_show_tables_loops6993478
Ref: option_ndb_show_tables_parsable6993695
Ref: option_ndb_show_tables_show-temp-status6993845
Ref: option_ndb_show_tables_type6993939
Ref: option_ndb_show_tables_unqualified6994289
Node: mysql-cluster-programs-ndb-size-pl6994770
Ref: mysql-cluster-ndb_size_pl-options-table6996600
Ref: option_ndb_size_pl_options6999457
Ref: option_ndb_size_pl_debugging7003864
Ref: option_ndb_size_pl_format7004189
Node: mysql-cluster-programs-ndb-waiter7004989
Ref: mysql-cluster-ndb_waiter-options-table7007022
Ref: mysql-cluster-programs-ndb-waiter-additional-options7008622
Ref: option_ndb_waiter_no-contact7008651
Ref: option_ndb_waiter_not-started7008874
Ref: option_ndb_waiter_timeout7009093
Ref: option_ndb_waiter_single-user7009302
Ref: option_ndb_waiter_nowait-nodes7009392
Ref: option_ndb_waiter_wait-nodes7009746
Node: mysql-cluster-program-options-common7011855
Ref: mysql-cluster-ndb_common-options-table7013254
Ref: option_ndb_common_help7016062
Ref: option_ndb_common_character-sets-dir7016375
Ref: option_ndb_common_ndb-connectstring7016835
Ref: option_ndb_common_core-file7017694
Ref: option_ndb_common_debug7018711
Ref: option_ndb_common_ndb-mgmd-host7019253
Ref: option_ndb_common_ndb-nodeid7019958
Ref: option_ndb_common_ndb-optimized-node-selection7020536
Ref: option_ndb_common_version7020981
Node: mysql-cluster-management7021634
Node: mysql-cluster-start-phases7027424
Node: mysql-cluster-mgm-client-commands7033800
Node: mysql-cluster-backup7045036
Node: mysql-cluster-backup-concepts7046423
Node: mysql-cluster-backup-using-management-client7048274
Node: mysql-cluster-backup-configuration7056825
Node: mysql-cluster-backup-troubleshooting7057985
Node: mysql-cluster-mysqld7059129
Node: mysql-cluster-rolling-restart7064528
Ref: mysql-cluster-rolling-restart-multiple-ndb-mgmd7070056
Node: mysql-cluster-event-reports7071718
Node: mysql-cluster-logging-management-commands7076902
Node: mysql-cluster-log-events7081045
Node: mysql-cluster-log-statistics7093305
Node: mysql-cluster-logs-ndb-messages7102080
Node: mysql-cluster-logs-cluster-log7102714
Node: mysql-cluster-ndb-transporter-errors7149091
Node: mysql-cluster-single-user-mode7155334
Node: mysql-cluster-sql-statements7157703
Node: mysql-cluster-ndbinfo7165337
Node: mysql-cluster-ndbinfo-arbitrator-validity-detail7178886
Node: mysql-cluster-ndbinfo-arbitrator-validity-summary7181029
Node: mysql-cluster-ndbinfo-blocks7183106
Node: mysql-cluster-ndbinfo-cluster-operations7184507
Node: mysql-cluster-ndbinfo-cluster-transactions7188509
Node: mysql-cluster-ndbinfo-config-params7191632
Node: mysql-cluster-ndbinfo-counters7192912
Node: mysql-cluster-ndbinfo-diskpagebuffer7197292
Node: mysql-cluster-ndbinfo-logbuffers7201014
Node: mysql-cluster-ndbinfo-logspaces7202226
Node: mysql-cluster-ndbinfo-membership7203422
Node: mysql-cluster-ndbinfo-memoryusage7208671
Node: mysql-cluster-ndbinfo-nodes7212054
Node: mysql-cluster-ndbinfo-resources7218443
Node: mysql-cluster-ndbinfo-server-operations7220081
Node: mysql-cluster-ndbinfo-server-transactions7224453
Node: mysql-cluster-ndbinfo-threadblocks7228005
Node: mysql-cluster-ndbinfo-threadstat7229365
Node: mysql-cluster-ndbinfo-transporters7232361
Node: mysql-cluster-security7239142
Node: mysql-cluster-security-networking-issues7240051
Node: mysql-cluster-security-mysql-privileges7250138
Node: mysql-cluster-security-mysql-security-procedures7257696
Node: mysql-cluster-disk-data7261974
Node: mysql-cluster-disk-data-objects7263646
Node: mysql-cluster-disk-data-symlinks7276537
Node: mysql-cluster-disk-data-storage-requirements7281453
Node: mysql-cluster-online-add-node7283518
Node: mysql-cluster-online-add-node-remarks7284471
Node: mysql-cluster-online-add-node-basics7295172
Node: mysql-cluster-online-add-node-example7299171
Node: mysql-cluster-privilege-distribution7319938
Node: mysql-cluster-ndb-api-statistics7330566
Node: mysql-cluster-replication7372112
Ref: mysql-cluster-replication-ndb-non-ndb7376516
Node: mysql-cluster-replication-abbreviations7377131
Node: mysql-cluster-replication-general7378902
Node: mysql-cluster-replication-issues7383117
Ref: mysql-cluster-replication-ndb-to-non-ndb7391541
Ref: mysql-cluster-replication-ndb-to-nontransactional7394955
Ref: mysql-cluster-replication-issues-filtering7395946
Node: mysql-cluster-replication-schema7399896
Node: mysql-cluster-replication-preparation7410082
Node: mysql-cluster-replication-starting7415358
Node: mysql-cluster-replication-two-channels7420499
Node: mysql-cluster-replication-failover7423927
Node: mysql-cluster-replication-backups7428495
Node: mysql-cluster-replication-auto-sync7437105
Node: mysql-cluster-replication-pitr7443246
Node: mysql-cluster-replication-multi-master7446726
Node: mysql-cluster-replication-conflict-resolution7453661
Ref: option_mysqld_ndb-log-updated-only7459100
Ref: option_mysqld_ndb-log-update-as-write7460212
Ref: mysql-cluster-ndb-replication-table7461216
Ref: mysql-cluster-replication-ndb-old7464688
Ref: mysql-cluster-replication-ndb-max7465343
Ref: mysql-cluster-replication-ndb-max-delete-win7465993
Ref: mysql-cluster-replication-ndb-epoch7467082
Ref: mysql-cluster-replication-ndb-epoch-statvars7471661
Ref: mysql-cluster-replication-ndb-epoch-limitations7472449
Ref: mysql-cluster-replication-ndb-epoch-trans7474603
Node: mysql-cluster-news7483222
Node: partitioning7483645
Node: partitioning-overview7490859
Node: partitioning-types7500143
Node: partitioning-range7506973
Ref: partitioning-time-intervals7516706
Node: partitioning-list7520526
Node: partitioning-columns7526939
Node: partitioning-columns-range7529148
Node: partitioning-columns-list7546442
Node: partitioning-hash7551186
Node: partitioning-linear-hash7557908
Node: partitioning-key7560780
Node: partitioning-subpartitions7565607
Node: partitioning-handling-nulls7574844
Node: partitioning-management7589063
Node: partitioning-management-range-list7592787
Node: partitioning-management-hash-key7610519
Node: partitioning-maintenance7613383
Node: partitioning-info7617126
Node: partitioning-pruning7623068
Node: partitioning-limitations7632318
Ref: partitioning-limitations-file-system-ops7638940
Ref: partitioning-limitations-max-partitions7641113
Ref: partitioning-limitations-subpartitions7646565
Node: partitioning-limitations-partitioning-keys-unique-keys7650171
Node: partitioning-limitations-storage-engines7658871
Node: partitioning-limitations-functions7662483
Ref: partitioning-limitations-ceiling-floor7664509
Ref: partitioning-limitations-extract7665109
Node: partitioning-limitations-locking7665598
Node: stored-programs-views7668139
Node: stored-programs-defining7670460
Node: stored-routines7673452
Node: stored-routines-syntax7676660
Node: stored-routines-privileges7679775
Node: stored-routines-metadata7681408
Node: stored-routines-last-insert-id7682232
Node: triggers7683228
Node: trigger-syntax7685629
Node: trigger-metadata7695831
Node: events7696353
Node: events-overview7698286
Node: events-configuration7702427
Ref: events-event-scheduler-option7702960
Node: events-syntax7708526
Node: events-metadata7709530
Node: events-status-info7712336
Node: events-privileges7714446
Node: views7722441
Node: view-syntax7723660
Node: view-algorithms7725011
Node: view-updatability7728652
Node: view-metadata7734682
Node: stored-programs-security7735079
Node: stored-programs-logging7741157
Node: information-schema7762182
Node: character-sets-table7774054
Node: collations-table7775044
Node: collation-character-set-applicability-table7776778
Node: columns-table7777671
Node: column-privileges-table7780366
Node: engines-table7782172
Node: events-table7783175
Node: status-table7793104
Node: variables-table7794154
Node: key-column-usage-table7795264
Node: parameters-table7797966
Node: partitions-table7801874
Node: plugins-table7811746
Node: processlist-table7815243
Node: profiling-table7817278
Node: referential-constraints-table7820086
Node: routines-table7821812
Node: schemata-table7827302
Node: schema-privileges-table7828299
Node: statistics-table7829435
Node: tables-table7831491
Node: tablespaces-table7835484
Node: table-constraints-table7836645
Node: table-privileges-table7838074
Node: triggers-table7839390
Node: user-privileges-table7845040
Node: views-table7846083
Node: innodb-i_s-tables7850562
Node: innodb-cmp-table7852476
Ref: innodb-information-schema-innodb_cmp_columns_table7852902
Node: innodb-cmpmem-table7857109
Ref: innodb-information-schema-innodb_cmpmem_columns_table7857555
Node: innodb-trx-table7861697
Ref: innodb-information-schema-innodb_trx_columns_table7862193
Node: innodb-locks-table7868901
Ref: innodb-information-schema-innodb_locks_columns_table7869367
Node: innodb-lock-waits-table7872348
Ref: innodb-information-schema-innodb_lock_waits_columns_table7872811
Node: innodb-buffer-page-table7873810
Ref: innodb-information-schema-innodb_buffer_page_table7874169
Node: innodb-buffer-page-lru-table7877422
Node: innodb-buffer-pool-stats-table7879004
Ref: innodb-information-schema-innodb_buffer_pool_stats_table7879889
Node: mysql-cluster-i_s-tables7881208
Node: files-table7882602
Node: ndb-transid-mysql-connection-map-table7899107
Node: thread-pool-i_s-tables7904517
Node: tp-thread-state-table7906348
Node: tp-thread-group-state-table7908189
Node: tp-thread-group-stats-table7911658
Node: extended-show7915729
Node: performance-schema7921841
Node: performance-schema-quick-start7927748
Node: performance-schema-configuration7945747
Node: performance-schema-build-configuration7947084
Node: performance-schema-startup-configuration7950382
Node: performance-schema-runtime-configuration7953537
Node: performance-schema-timing7956934
Node: performance-schema-filtering7965446
Node: performance-schema-pre-filtering7971252
Node: performance-schema-filtering-names7975346
Node: performance-schema-instrumentation-checking7977231
Node: performance-schema-queries7978994
Node: performance-schema-instrument-naming7980387
Node: performance-schema-status-monitoring7984285
Node: performance-schema-table-characteristics7994283
Node: performance-schema-table-descriptions7995613
Node: performance-schema-table-index7997774
Ref: performance-schema-tables-table7998144
Node: performance-schema-setup-tables8000334
Node: setup-consumers-table8001664
Node: setup-instruments-table8003412
Node: setup-timers-table8006480
Node: performance-schema-instance-tables8007803
Node: cond-instances-table8009483
Node: file-instances-table8010498
Node: mutex-instances-table8011529
Node: rwlock-instances-table8015161
Node: performance-schema-waits-tables8017559
Node: events-waits-current-table8018413
Node: events-waits-history-table8022881
Node: events-waits-history-long-table8023854
Node: performance-schema-summary-tables8024830
Node: event-wait-summary-tables8026793
Node: file-summary-tables8030193
Node: performance-schema-miscellaneous-tables8032734
Node: performance-timers-table8033402
Node: threads-table8035856
Node: performance-schema-option-variable-reference8038116
Node: performance-schema-system-variables8041541
Ref: sysvar_performance_schema8043600
Ref: sysvar_performance_schema_events_waits_history_long_size8044506
Ref: sysvar_performance_schema_events_waits_history_size8045398
Ref: sysvar_performance_schema_max_cond_classes8046266
Ref: sysvar_performance_schema_max_cond_instances8047027
Ref: sysvar_performance_schema_max_file_classes8047807
Ref: sysvar_performance_schema_max_file_handles8048563
Ref: sysvar_performance_schema_max_file_instances8049647
Ref: sysvar_performance_schema_max_mutex_classes8050422
Ref: sysvar_performance_schema_max_mutex_instances8051184
Ref: sysvar_performance_schema_max_rwlock_classes8051965
Ref: sysvar_performance_schema_max_rwlock_instances8052733
Ref: sysvar_performance_schema_max_table_handles8053520
Ref: sysvar_performance_schema_max_table_instances8054285
Ref: sysvar_performance_schema_max_thread_classes8055066
Ref: sysvar_performance_schema_max_thread_instances8055834
Node: performance-schema-status-variables8057130
Ref: statvar_Performance_schema_cond_classes_lost8058712
Ref: statvar_Performance_schema_cond_instances_lost8058816
Ref: statvar_Performance_schema_file_classes_lost8058932
Ref: statvar_Performance_schema_file_handles_lost8059031
Ref: statvar_Performance_schema_file_instances_lost8059139
Ref: statvar_Performance_schema_locker_lost8059250
Ref: statvar_Performance_schema_mutex_classes_lost8059730
Ref: statvar_Performance_schema_mutex_instances_lost8059831
Ref: statvar_Performance_schema_rwlock_classes_lost8059944
Ref: statvar_Performance_schema_rwlock_instances_lost8060047
Ref: statvar_Performance_schema_table_handles_lost8060162
Ref: statvar_Performance_schema_table_instances_lost8060272
Ref: statvar_Performance_schema_thread_classes_lost8060385
Ref: statvar_Performance_schema_thread_instances_lost8060488
Node: performance-schema-and-plugins8060726
Node: performance-schema-examples8061787
Node: connectors-apis8065246
Ref: connectors-apis-summary8071050
Ref: connectors-apis-versions8076016
Node: connector-odbc8077696
Node: connector-odbc-versions8080860
Node: connector-odbc-introduction8084218
Node: connector-odbc-general-information8085131
Node: connector-odbc-architecture8085993
Node: connector-odbc-driver-manager8089808
Node: connector-odbc-installation8091451
Node: connector-odbc-installation-binary-windows8096573
Node: connector-odbc-installation-binary-windows-installer8098487
Node: connector-odbc-installation-binary-windows-dll8100649
Node: connector-odbc-installation-binary-unix8104143
Node: connector-odbc-installation-binary-unix-tarball8104991
Node: connector-odbc-installation-binary-unix-rpm8106150
Node: connector-odbc-installation-binary-macosx8107517
Node: connector-odbc-installation-source-windows8109696
Ref: connector-odbc-installation-source-windows-5-2-building8111064
Node: connector-odbc-installation-source-unix8112348
Ref: connector-odbc-installation-source-unix-cmake-options8114535
Ref: connector-odbc-installation-source-unix-otheroptions8115156
Ref: connector-odbc-installation-source-unix-building8117009
Ref: connector-odbc-installation-source-unix-shared-libraries8117277
Ref: connector-odbc-installation-source-unix-installing8119531
Ref: connector-odbc-installation-source-unix-testing8120237
Node: connector-odbc-installation-source-unix-macosx8120797
Node: connector-odbc-installation-source-development8122782
Node: connector-odbc-configuration8125121
Node: connector-odbc-configuration-dsn8126591
Node: connector-odbc-configuration-connection-parameters8128075
Ref: codbc-dsn-config-options8128995
Ref: codbc-dsn-option-flags8137074
Ref: codbc-dsn-option-combos8154834
Node: connector-odbc-configuration-dsn-windows8156068
Node: connector-odbc-configuration-dsn-windows-5-28159512
Node: connector-odbc-configuration-dsn-windows-5-2-command-line8162907
Node: connector-odbc-configuration-dsn-windows-problems8163498
Node: connector-odbc-configuration-dsn-macosx8164699
Node: connector-odbc-configuration-dsn-unix8167531
Node: connector-odbc-configuration-connection-without-dsn8169513
Node: connector-odbc-configuration-connection-pooling8171028
Node: connector-odbc-configuration-trace8171799
Node: connector-odbc-configuration-trace-windows8172615
Node: connector-odbc-configuration-trace-macosx8173685
Node: connector-odbc-configuration-trace-unix8174374
Node: connector-odbc-configuration-trace-log8175388
Node: connector-odbc-examples8176479
Node: connector-odbc-examples-overview8177623
Node: connector-odbc-examples-walkthrough8178388
Node: connector-odbc-examples-tools8180635
Node: connector-odbc-examples-tools-with-access8183255
Node: connector-odbc-examples-tools-with-access-export8184118
Node: connector-odbc-examples-tools-with-access-import8185926
Node: connector-odbc-examples-tools-with-access-linked-tables8187160
Node: connector-odbc-examples-tools-with-wordexcel8190640
Node: connector-odbc-examples-tools-with-crystalreports8193834
Node: connector-odbc-examples-programming8198546
Node: connector-odbc-examples-programming-vb8199341
Node: connector-odbc-examples-programming-vb-ado8200058
Node: connector-odbc-examples-programming-vb-dao8202977
Node: connector-odbc-examples-programming-vb-rdo8205406
Node: connector-odbc-examples-programming-net8207592
Node: connector-odbc-examples-programming-net-csharp8208152
Node: connector-odbc-examples-programming-net-vb8214100
Node: connector-odbc-reference8218083
Node: connector-odbc-reference-api8218757
Node: connector-odbc-reference-datatypes8231030
Node: connector-odbc-reference-errorcodes8234086
Node: connector-odbc-usagenotes8237374
Node: connector-odbc-usagenotes-functionality8238048
Node: connector-odbc-usagenotes-functionality-last-insert-id8238809
Node: connector-odbc-usagenotes-functionality-dynamic-cursor8240416
Node: connector-odbc-usagenotes-functionality-performance8241105
Node: connector-odbc-usagenotes-functionality-query-timeout8242692
Node: connector-odbc-usagenotes-apptips8243217
Node: connector-odbc-usagenotes-apptips-microsoft8244713
Node: connector-odbc-usagenotes-apptips-microsoft-access8245963
Node: connector-odbc-usagenotes-apptips-microsoft-excel8250380
Node: connector-odbc-usagenotes-apptips-microsoft-visualbasic8251589
Node: connector-odbc-usagenotes-apptips-microsoft-visualinterdev8252360
Node: connector-odbc-usagenotes-apptips-microsoft-visualobjects8252954
Node: connector-odbc-usagenotes-apptips-microsoft-ado8253316
Node: connector-odbc-usagenotes-apptips-microsoft-asp8254917
Node: connector-odbc-usagenotes-apptips-microsoft-vb-asp8255829
Node: connector-odbc-usagenotes-apptips-borland8256563
Node: connector-odbc-usagenotes-apptips-borland-builder8257472
Node: connector-odbc-usagenotes-apptips-borland-delphi8258031
Node: connector-odbc-usagenotes-apptips-borland-cppbuilder8260020
Node: connector-odbc-usagenotes-apptips-coldfusion8260543
Node: connector-odbc-usagenotes-apptips-openoffice8261943
Node: connector-odbc-usagenotes-apptips-sambarserver8262488
Node: connector-odbc-usagenotes-apptips-datajunction8262950
Node: connector-odbc-usagenotes-apptips-vision8263460
Node: connector-odbc-errors8263777
Node: connector-odbc-support8277208
Node: connector-odbc-support-community8277883
Node: connector-odbc-support-bug-report8278799
Node: connector-odbc-support-patch-submission8281367
Node: connector-net8281740
Node: connector-net-versions8285258
Ref: connector-net-prereqs8290002
Node: connector-net-installation8292450
Node: connector-net-installation-windows8293263
Node: connector-net-installation-binary-windows-installer8293997
Node: connector-net-installation-binary-windows-zip8298271
Node: connector-net-installation-unix8300621
Node: connector-net-installation-source8302818
Node: connector-net-visual-studio8303975
Node: connector-net-visual-studio-making-a-connection8307831
Ref: connector-net-visual-studio-add-connection8308657
Ref: connector-net-visual-studio-choose-data-source8308966
Ref: connector-net-visual-studio-add-connection-dialog8309300
Ref: connector-net-visual-studio-new-data-connection8309892
Node: connector-net-visual-studio-intellisense8310496
Node: connector-net-visual-studio-editing-tables8311318
Ref: connector-net-visual-studio-editing-new-table8312640
Ref: connector-net-visual-studio-choose-table-name8313714
Ref: connector-net-visual-studio-newly-created-table8313819
Ref: connector-net-visual-studio-table-designer-menu-item8313984
Node: connector-net-visual-studio-editing-tables-column-editor8314028
Node: connector-net-visual-studio-editing-tables-indexes8315347
Ref: connector-net-visual-studio-indexes-dialog8315924
Node: connector-net-visual-studio-editing-tables-foreign-keys8316247
Ref: connector-net-visual-studio-foreign-key-relationships8317262
Node: connector-net-visual-studio-editing-tables-column-details8317314
Node: connector-net-visual-studio-editing-tables-table-properties8317891
Ref: connector-net-visual-studio-table-properties-menu8318321
Ref: connector-net-visual-studio-selecting-table-properties8318961
Node: connector-net-visual-studio-editing-views8318997
Ref: connector-net-visual-studio-views-edit-sql8319471
Ref: connector-net-visual-studio-views-sql-added8319550
Ref: connector-net-visual-studio-views-sql-saved8320369
Node: connector-net-visual-studio-editing-stored-procedures-and-functions8320403
Ref: connector-net-visual-studio-stored-procedure-edit8320962
Ref: connector-net-visual-studio-stored-procedure-saved8322523
Node: connector-net-visual-studio-editing-triggers8322787
Node: connector-net-visual-studio-editing-user-defined-functions-udf8324681
Node: connector-net-visual-studio-debugger8326281
Ref: connector-net-visual-studio-debugger-connection8327895
Ref: connector-net-visual-studio-debugger-choose-routine8328238
Ref: connector-net-visual-studio-debugger-args18328846
Ref: connector-net-visual-studio-debugger-args28328892
Ref: connector-net-visual-studio-debugger-trigger8332031
Ref: connector-net-visual-studio-debugger-callstack8332507
Ref: connector-net-visual-studio-debugger-stepping8332703
Ref: connector-net-visual-studio-debugger-stepping18332742
Ref: connector-net-visual-studio-debugger-stepping28332793
Ref: connector-net-visual-studio-debugger-conditional-breakpoints8336373
Ref: connector-net-visual-studio-debugger-expressions-breakpoints8336421
Node: connector-net-visual-studio-cloning-database-objects8338509
Node: connector-net-visual-studio-dropping-database-objects8339490
Node: connector-net-visual-studio-entity-framework8340146
Node: connector-net-website-config8341911
Ref: connector-net-website-config-tool8342681
Ref: connector-net-website-config-tool-membership8342830
Ref: connector-net-website-config-tool-string-editor8343223
Ref: connector-net-website-config-tool-options8344226
Ref: connector-net-website-config-tool-roles8344460
Ref: connector-net-website-config-tool-profiles8344685
Ref: connector-net-website-config-tool-session-state8344876
Ref: connector-net-website-config-tool-tables8345422
Node: connector-net-sql-editor8345483
Ref: connector-net-sql-editor-new-file-dialog8345909
Ref: connector-net-sql-editor-query8346665
Node: connector-net-ddl-t4-ef8346823
Ref: connector-net-ddl-t4-ef-properties8347452
Ref: connector-net-ddl-t4-ef-generate8347737
Node: connector-net-tutorials8347805
Node: connector-net-tutorials-intro8349325
Node: connector-net-tutorials-connection8351032
Node: connector-net-tutorials-sql-command8353207
Node: connector-net-tutorials-data-adapter8359168
Ref: connector-net-tutorials-18366282
Node: connector-net-tutorials-parameters8366328
Node: connector-net-tutorials-stored-procedures8369650
Node: connector-net-tutorials-asp-roles8373955
Ref: connector-net-tutorials-authentication-type8379739
Ref: connector-net-tutorials-select-provider8380069
Ref: connector-net-tutorials-tables8380375
Ref: connector-net-tutorials-security-tab8381058
Ref: connector-net-tutorials-create-user8381411
Ref: connector-net-tutorials-users-roles-tables8381613
Node: connector-net-tutorials-asp-provider-session-state8381815
Node: connector-net-tutorials-asp-provider-profile8388346
Ref: connector-net-tutorials-asp-provider-profile-simple-app8391646
Node: connector-net-tutorials-entity-framework-winform-data-source8394051
Ref: connector-net-visual-studio-entity-framework-add-entity-data-model8395612
Ref: connector-net-visual-studio-entity-framework-entity-data-model-wizard-18395869
Ref: connector-net-visual-studio-entity-framework-entity-data-model-wizard-28396265
Ref: connector-net-visual-studio-entity-framework-entity-data-model-wizard-38396926
Ref: connector-net-visual-studio-entity-framework-entity-data-model-diagram8397049
Ref: connector-net-visual-studio-entity-framework-data-source-configuration-wizard-18397527
Ref: connector-net-visual-studio-entity-framework-data-source-configuration-wizard-28397824
Ref: connector-net-visual-studio-entity-framework-data-source-configuration-wizard-38397985
Ref: connector-net-visual-studio-entity-framework-data-sources8398292
Ref: connector-net-visual-studio-entity-framework-data-form-design8398787
Ref: connector-net-visual-studio-entity-framework-form-add-code8399253
Ref: connector-net-visual-studio-entity-framework-app-running-18399431
Ref: connector-net-visual-studio-entity-framework-save-enabled8400058
Ref: connector-net-visual-studio-entity-framework-form-add-code-save8400309
Node: connector-net-tutorials-entity-framework-databinding-linq-entities8400514
Ref: connector-net-visual-studio-entity-framework-tutorial-linq-18401871
Ref: connector-net-visual-studio-entity-framework-tutorial-linq-28402150
Ref: connector-net-visual-studio-entity-framework-tutorial-linq-38402479
Ref: connector-net-visual-studio-entity-framework-tutorial-linq-48402577
Ref: connector-net-visual-studio-entity-framework-tutorial-linq-58402729
Ref: connector-net-visual-studio-entity-framework-tutorial-linq-68406770
Ref: connector-net-visual-studio-entity-framework-tutorial-linq-78406939
Node: connector-net-tutorials-ssl8407150
Node: connector-net-tutorials-mysqlscript8413780
Node: connector-net-tutorials-mysqlscript-delimiter8419383
Node: connector-net-tutorials-efmodel-ddl8423252
Node: connector-net-programming8425384
Node: connector-net-programming-connecting8428474
Node: connector-net-programming-connecting-connection-string8429187
Node: connector-net-programming-connecting-open8430798
Node: connector-net-programming-connecting-errors8433660
Node: connector-net-programming-getschema8436490
Node: connector-net-programming-getschema-collections8438045
Node: connector-net-programming-mysqlcommand8440755
Node: connector-net-programming-connection-pooling8444074
Node: connector-net-programming-authentication-windows-native8447230
Node: connector-net-programming-authentication-user-plugin8448783
Node: connector-net-programming-tablecaching8458379
Node: connector-net-programming-prepared8459572
Node: connector-net-programming-prepared-preparing8460717
Node: connector-net-programming-stored8463357
Node: connector-net-programming-stored-using8466157
Node: connector-net-programming-blob8474499
Node: connector-net-programming-blob-serverprep8475617
Node: connector-net-programming-blob-writing8477722
Node: connector-net-programming-blob-reading8481279
Node: connector-net-interceptors8485127
Node: connector-net-programming-datetime8490456
Node: connector-net-programming-datetime-fractional8491491
Node: connector-net-programming-datetime-problems8493159
Node: connector-net-programming-datetime-restricting8493867
Node: connector-net-programming-datetime-invalid8494917
Node: connector-net-programming-datetime-null8496663
Node: connector-net-programming-bulk-loader8497714
Node: connector-net-programming-tracing8501379
Node: connector-net-programming-tracing-mysql8506446
Node: connector-net-programming-tracing-mysql-custom-listeners8513797
Node: connector-net-programming-binary-issues8517809
Node: connector-net-using-character-sets8519670
Node: connector-net-programming-crystal8521280
Node: connector-net-programming-crystal-source8521995
Node: connector-net-programming-crystal-creating8525498
Node: connector-net-programming-crystal-displaying8526590
Node: connector-net-programming-asp-provider8534337
Node: connector-net-medium-trust8542447
Node: connector-net-medium-trust-evolution8543580
Node: connector-net-medium-trust-gac8545707
Node: connector-net-medium-trust-nongac8550627
Node: connector-net-connection-options8552919
Node: connector-net-rt8583201
Node: connector-net-entityframework508585464
Node: connector-net-ref8593372
Node: connector-net-ref-mysqlclient8593877
Node: connector-net-ref-mysqlclienthierarchy8600163
Node: connector-net-ref-mysqlclient-basecommandinterceptor8600537
Node: connector-net-ref-mysqlclient-baseexceptioninterceptor8601683
Node: connector-net-ref-mysqlclient-mysqlcommand8602831
Node: connector-net-ref-mysqlclient-mysqlcommandmembers8604028
Node: connector-net-ref-mysqlclient-mysqlcommandconstructor8610031
Node: connector-net-ref-mysqlclient-mysqlcommandconstructor18611557
Node: connector-net-ref-mysqlclient-mysqlcommandconstructor28612367
Node: connector-net-ref-mysqlclient-mysqlcommandconstructor38613150
Node: connector-net-ref-mysqlclient-mysqlconnection8614081
Node: connector-net-ref-mysqlclient-mysqlconnectionmembers8615287
Node: connector-net-ref-mysqlclient-mysqlconnectionconstructor8621733
Node: connector-net-ref-mysqlclient-mysqlconnectionconstructor18622902
Node: connector-net-ref-mysqlclient-mysqlconnectionconstructor28623747
Node: connector-net-ref-mysqlclient-mysqlconnection-connectionstring8624499
Node: connector-net-ref-mysqlclient-mysqlconnection-connectiontimeout8625275
Node: connector-net-ref-mysqlclient-mysqlconnection-database8626057
Node: connector-net-ref-mysqlclient-mysqlconnection-datasource8626781
Node: connector-net-ref-mysqlclient-mysqlconnection-serverthread8627461
Node: connector-net-ref-mysqlclient-mysqlconnection-serverversion8628165
Node: connector-net-ref-mysqlclient-mysqlconnection-state8628801
Node: connector-net-ref-mysqlclient-mysqlconnection-usecompression8629534
Node: connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overloads8630277
Node: connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overload-18631362
Node: connector-net-ref-mysqlclient-mysqltransaction8632346
Node: connector-net-ref-mysqlclient-mysqltransactionmembers8633567
Node: connector-net-ref-mysqlclient-mysqltransaction-connection8636158
Node: connector-net-ref-mysqlclient-mysqltransaction-isolationlevel8637469
Node: connector-net-ref-mysqlclient-mysqltransaction-commit8638521
Node: connector-net-ref-mysqlclient-mysqltransaction-rollback8639240
Node: connector-net-ref-mysqlclient-mysqlconnection-begintransaction-overload-28639901
Node: connector-net-ref-mysqlclient-mysqlconnection-changedatabase8640792
Node: connector-net-ref-mysqlclient-mysqlconnection-close8641643
Node: connector-net-ref-mysqlclient-mysqlconnection-createcommand8642350
Node: connector-net-ref-mysqlclient-mysqlconnection-open8643011
Node: connector-net-ref-mysqlclient-mysqlconnection-ping8643701
Node: connector-net-ref-mysqlclient-mysqlconnection-infomessage8644332
Node: connector-net-ref-mysqlclient-mysqlinfomessageeventhandler8645132
Node: connector-net-ref-mysqlclient-mysqlinfomessageeventargs8646281
Node: connector-net-ref-mysqlclient-mysqlinfomessageeventargsmembers8647585
Node: connector-net-ref-mysqlclient-mysqlinfomessageeventargsconstructor8650359
Node: connector-net-ref-mysqlclient-mysqlinfomessageeventargs-errors8651183
Node: connector-net-ref-mysqlclient-mysqlerror8651885
Node: connector-net-ref-mysqlclient-mysqlerrormembers8652981
Node: connector-net-ref-mysqlclient-mysqlerrorconstructor8655605
Node: connector-net-ref-mysqlclient-mysqlerror-code8656384
Node: connector-net-ref-mysqlclient-mysqlerror-level8656953
Node: connector-net-ref-mysqlclient-mysqlerror-message8657526
Node: connector-net-ref-mysqlclient-mysqlconnection-statechange8658055
Node: connector-net-ref-mysqlclient-mysqlcommandconstructor48658672
Node: connector-net-ref-mysqlclient-mysqlcommand-commandtext8659538
Node: connector-net-ref-mysqlclient-mysqlcommand-commandtimeout8660252
Node: connector-net-ref-mysqlclient-mysqlcommand-commandtype8660983
Node: connector-net-ref-mysqlclient-mysqlcommand-connection8661719
Node: connector-net-ref-mysqlclient-mysqlcommand-isprepared8662340
Node: connector-net-ref-mysqlclient-mysqlcommand-parameters8662945
Node: connector-net-ref-mysqlclient-mysqlparametercollection8663691
Node: connector-net-ref-mysqlclient-mysqlparametercollectionmembers8665288
Node: connector-net-ref-mysqlclient-mysqlparametercollectionconstructor8671793
Node: connector-net-ref-mysqlclient-mysqlparametercollection-count8672605
Node: connector-net-ref-mysqlclient-mysqlparametercollectionitem8673404
Node: connector-net-ref-mysqlclient-mysqlparameter8674915
Node: connector-net-ref-mysqlclient-mysqlparametermembers8676416
Node: connector-net-ref-mysqlclient-mysqlparameterconstructor8682791
Node: connector-net-ref-mysqlclient-mysqlparameterconstructor18685899
Node: connector-net-ref-mysqlclient-mysqlparameterconstructor38686683
Node: connector-net-ref-mysqlclient-mysqldbtype8687957
Node: connector-net-ref-mysqlclient-mysqlparameterconstructor48695011
Node: connector-net-ref-mysqlclient-mysqlparameterconstructor68696412
Node: connector-net-ref-mysqlclient-mysqlparameter-value8699265
Node: connector-net-ref-mysqlclient-mysqlparameterconstructor58699937
Node: connector-net-ref-mysqlclient-mysqlparameterconstructor28701422
Node: connector-net-ref-mysqlclient-mysqlparameter-dbtype8702576
Node: connector-net-ref-mysqlclient-mysqlparameter-direction8703325
Node: connector-net-ref-mysqlclient-mysqlparameter-isnullable8704291
Node: connector-net-ref-mysqlclient-mysqlparameter-isunsigned8705088
Node: connector-net-ref-mysqlclient-mysqlparameter-mysqldbtype8705702
Node: connector-net-ref-mysqlclient-mysqlparameter-parametername8706386
Node: connector-net-ref-mysqlclient-mysqlparameter-precision8707176
Node: connector-net-ref-mysqlclient-mysqlparameter-scale8708031
Node: connector-net-ref-mysqlclient-mysqlparameter-size8708843
Node: connector-net-ref-mysqlclient-mysqlparameter-sourcecolumn8709596
Node: connector-net-ref-mysqlclient-mysqlparameter-sourceversion8710506
Node: connector-net-ref-mysqlclient-mysqlparameter-tostring8711396
Node: connector-net-ref-mysqlclient-mysqlparametercollection-item18712120
Node: connector-net-ref-mysqlclient-mysqlparametercollection-item28713065
Node: connector-net-ref-mysqlclient-mysqlparametercollection-add-overloads8713960
Node: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-28717485
Node: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-18718856
Node: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-48720276
Node: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-58721766
Node: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-68723362
Node: connector-net-ref-mysqlclient-mysqlparametercollection-add-overload-38725100
Node: connector-net-ref-mysqlclient-mysqlparametercollection-clear8726601
Node: connector-net-ref-mysqlclient-mysqlparametercollection-contains-overloads8727408
Node: connector-net-ref-mysqlclient-mysqlparametercollection-contains-overload-18728840
Node: connector-net-ref-mysqlclient-mysqlparametercollection-contains-overload-28730236
Node: connector-net-ref-mysqlclient-mysqlparametercollection-copyto8731606
Node: connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overloads8732639
Node: connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overload-18734060
Node: connector-net-ref-mysqlclient-mysqlparametercollection-indexof-overload-28735458
Node: connector-net-ref-mysqlclient-mysqlparametercollection-insert8736884
Node: connector-net-ref-mysqlclient-mysqlparametercollection-remove8737878
Node: connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overloads8738798
Node: connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overload-18740177
Node: connector-net-ref-mysqlclient-mysqlparametercollection-removeat-overload-28741401
Node: connector-net-ref-mysqlclient-mysqlcommand-transaction8742653
Node: connector-net-ref-mysqlclient-mysqlcommand-updatedrowsource8743288
Node: connector-net-ref-mysqlclient-mysqlcommand-cancel8744062
Node: connector-net-ref-mysqlclient-mysqlcommand-createparameter8745115
Node: connector-net-ref-mysqlclient-mysqlcommand-executenonquery8746053
Node: connector-net-ref-mysqlclient-mysqlcommand-executereader-overloads8746828
Node: connector-net-ref-mysqlclient-mysqlcommand-executereader-overload-18747845
Node: connector-net-ref-mysqlclient-mysqldatareader8748767
Node: connector-net-ref-mysqlclient-mysqldatareadermembers8750183
Node: connector-net-ref-mysqlclient-mysqldatareader-depth8761159
Node: connector-net-ref-mysqlclient-mysqldatareader-fieldcount8761975
Node: connector-net-ref-mysqlclient-mysqldatareader-hasrows8762742
Node: connector-net-ref-mysqlclient-mysqldatareader-isclosed8763430
Node: connector-net-ref-mysqlclient-mysqldatareaderitem8764194
Node: connector-net-ref-mysqlclient-mysqldatareader-item18765444
Node: connector-net-ref-mysqlclient-mysqldatareader-item28766474
Node: connector-net-ref-mysqlclient-mysqldatareader-recordsaffected8767445
Node: connector-net-ref-mysqlclient-mysqldatareader-close8768285
Node: connector-net-ref-mysqlclient-mysqldatareader-getboolean8769024
Node: connector-net-ref-mysqlclient-mysqldatareader-getbyte8769913
Node: connector-net-ref-mysqlclient-mysqldatareader-getbytes8770781
Node: connector-net-ref-mysqlclient-mysqldatareader-getchar8772295
Node: connector-net-ref-mysqlclient-mysqldatareader-getchars8773173
Node: connector-net-ref-mysqlclient-mysqldatareader-getdatatypename8774430
Node: connector-net-ref-mysqlclient-mysqldatareader-getdatetime8775348
Node: connector-net-ref-mysqlclient-mysqldatareader-getdecimal8776171
Node: connector-net-ref-mysqlclient-mysqldatareader-getdouble8776984
Node: connector-net-ref-mysqlclient-mysqldatareader-getfieldtype8777790
Node: connector-net-ref-mysqlclient-mysqldatareader-getfloat8778693
Node: connector-net-ref-mysqlclient-mysqldatareader-getguid8779488
Node: connector-net-ref-mysqlclient-mysqldatareader-getint168780270
Node: connector-net-ref-mysqlclient-mysqldatareader-getint328781060
Node: connector-net-ref-mysqlclient-mysqldatareader-getint648781851
Node: connector-net-ref-mysqlclient-mysqldatareader-getmysqldatetime8782648
Node: connector-net-ref-mysqlclient-mysqldatareader-getname8783395
Node: connector-net-ref-mysqlclient-mysqldatareader-getordinal8784264
Node: connector-net-ref-mysqlclient-mysqldatareader-getschematable8785174
Node: connector-net-ref-mysqlclient-mysqldatareader-getstring8786053
Node: connector-net-ref-mysqlclient-mysqldatareader-gettimespan8786862
Node: connector-net-ref-mysqlclient-mysqldatareader-getuint168787577
Node: connector-net-ref-mysqlclient-mysqldatareader-getuint328788280
Node: connector-net-ref-mysqlclient-mysqldatareader-getuint648788979
Node: connector-net-ref-mysqlclient-mysqldatareader-getvalue8789678
Node: connector-net-ref-mysqlclient-mysqldatareader-getvalues8790568
Node: connector-net-ref-mysqlclient-mysqldatareader-isdbnull8791487
Node: connector-net-ref-mysqlclient-mysqldatareader-nextresult8792400
Node: connector-net-ref-mysqlclient-mysqldatareader-read8793253
Node: connector-net-ref-mysqlclient-mysqlcommand-executereader-overload-28793961
Node: connector-net-ref-mysqlclient-mysqlcommand-executescalar8794810
Node: connector-net-ref-mysqlclient-mysqlcommand-prepare8795565
Node: connector-net-ref-mysqlclient-mysqlcommandbuilder8796192
Node: connector-net-ref-mysqlclient-mysqlcommandbuildermembers8797388
Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overloads8802934
Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overload-18804579
Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-deriveparameters-overload-28806323
Node: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor8807287
Node: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor18809013
Node: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor38809912
Node: connector-net-ref-mysqlclient-mysqldataadapter8810865
Node: connector-net-ref-mysqlclient-mysqldataadaptermembers8812034
Node: connector-net-ref-mysqlclient-mysqldataadapterconstructor8821049
Node: connector-net-ref-mysqlclient-mysqldataadapterconstructor18822681
Node: connector-net-ref-mysqlclient-mysqldataadapterconstructor28823541
Node: connector-net-ref-mysqlclient-mysqldataadapterconstructor38824378
Node: connector-net-ref-mysqlclient-mysqldataadapterconstructor48825290
Node: connector-net-ref-mysqlclient-mysqldataadapter-deletecommand18826129
Node: connector-net-ref-mysqlclient-mysqldataadapter-insertcommand18826803
Node: connector-net-ref-mysqlclient-mysqldataadapter-selectcommand18827481
Node: connector-net-ref-mysqlclient-mysqldataadapter-updatecommand18828159
Node: connector-net-ref-mysqlclient-mysqldataadapter-rowupdated8828833
Node: connector-net-ref-mysqlclient-mysqlrowupdatedeventhandler8831348
Node: connector-net-ref-mysqlclient-mysqlrowupdatedeventargs8832416
Node: connector-net-ref-mysqlclient-mysqlrowupdatedeventargsmembers8833750
Node: connector-net-ref-mysqlclient-mysqlrowupdatedeventargsconstructor8837202
Node: connector-net-ref-mysqlclient-mysqlrowupdatedeventargs-command18838540
Node: connector-net-ref-mysqlclient-mysqldataadapter-rowupdating8839221
Node: connector-net-ref-mysqlclient-mysqlrowupdatingeventhandler8841457
Node: connector-net-ref-mysqlclient-mysqlrowupdatingeventargs8842537
Node: connector-net-ref-mysqlclient-mysqlrowupdatingeventargsmembers8843887
Node: connector-net-ref-mysqlclient-mysqlrowupdatingeventargsconstructor8846947
Node: connector-net-ref-mysqlclient-mysqlrowupdatingeventargs-command18848274
Node: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor48848963
Node: connector-net-ref-mysqlclient-mysqlcommandbuilderconstructor28849891
Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-dataadapter8850674
Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-quoteprefix8851346
Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-quotesuffix8851999
Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-getdeletecommand8852657
Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-getinsertcommand8853385
Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-getupdatecommand8854118
Node: connector-net-ref-mysqlclient-mysqlcommandbuilder-refreshschema8854848
Node: connector-net-ref-mysqlclient-mysqlexception8855462
Node: connector-net-ref-mysqlclient-mysqlexceptionmembers8856710
Node: connector-net-ref-mysqlclient-mysqlexception-number8860278
Node: connector-net-ref-mysqlclient-mysqlhelper8860858
Node: connector-net-ref-mysqlclient-mysqlhelpermembers8861991
Node: connector-net-ref-mysqlclient-mysqlhelper-executedatarow8865702
Node: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overloads8866989
Node: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-38869501
Node: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-48870921
Node: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-18872513
Node: connector-net-ref-mysqlclient-mysqlhelper-executedataset-overload-28873818
Node: connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overloads8875218
Node: connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overload-18876961
Node: connector-net-ref-mysqlclient-mysqlhelper-executenonquery-overload-28878625
Node: connector-net-ref-mysqlclient-mysqlhelper-executereader-overloads8880218
Node: connector-net-ref-mysqlclient-mysqlhelper-executereader-overload-18881427
Node: connector-net-ref-mysqlclient-mysqlhelper-executereader-overload-28882718
Node: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overloads8884192
Node: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-38885978
Node: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-48887306
Node: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-18888806
Node: connector-net-ref-mysqlclient-mysqlhelper-executescalar-overload-28890075
Node: connector-net-ref-mysqlclient-mysqlhelper-updatedataset8891442
Node: connector-net-ref-mysqlclient-mysqlerrorcode8892579
Node: connector-net-ref-types8893588
Node: connector-net-ref-typeshierarchy8894507
Node: connector-net-ref-types-mysqlconversionexception8894839
Node: connector-net-ref-types-mysqlconversionexceptionmembers8896070
Node: connector-net-ref-types-mysqlconversionexceptionconstructor8900452
Node: connector-net-ref-types-mysqldatetime8901089
Node: connector-net-ref-types-mysqldatetimemembers8902513
Node: connector-net-ref-types-mysqldatetime-op-explicit8908055
Node: connector-net-ref-types-mysqldatetime-day8908777
Node: connector-net-ref-types-mysqldatetime-hour8909345
Node: connector-net-ref-types-mysqlvalue-isnull8909910
Node: connector-net-ref-types-mysqlvalue8910516
Node: connector-net-ref-types-mysqlvaluemembers8911483
Node: connector-net-ref-types-mysqlvalue-numberformat8915510
Node: connector-net-ref-types-mysqlvalueconstructor8916106
Node: connector-net-ref-types-mysqlvalue-valueasobject8916732
Node: connector-net-ref-types-mysqlvalue-tostring8917345
Node: connector-net-ref-types-mysqlvalue-classtype8917968
Node: connector-net-ref-types-mysqlvalue-dbtype8918552
Node: connector-net-ref-types-mysqlvalue-mysqldbtype8919122
Node: connector-net-ref-types-mysqlvalue-mysqltypename8919720
Node: connector-net-ref-types-mysqlvalue-objectvalue8920336
Node: connector-net-ref-types-mysqldatetime-isvaliddatetime8920846
Node: connector-net-ref-types-mysqldatetime-millisecond8921517
Node: connector-net-ref-types-mysqldatetime-minute8922139
Node: connector-net-ref-types-mysqldatetime-month8922726
Node: connector-net-ref-types-mysqldatetime-second8923303
Node: connector-net-ref-types-mysqldatetime-year8923883
Node: connector-net-ref-types-mysqldatetime-getdatetime8924459
Node: connector-net-ref-types-mysqldatetime-tostring8925079
Node: connector-net-ref-mysqlclient-memcached-client8925683
Node: connector-net-ref-mysqlclient-memcached-clientmembers8926808
Node: connector-net-ref-mysqlclient-memcached-client-server8932195
Node: connector-net-ref-mysqlclient-memcached-client-port8932921
Node: connector-net-ref-mysqlclient-memcached-client-stream8933649
Node: connector-net-ref-mysqlclient-memcached-client-open8934261
Node: connector-net-ref-mysqlclient-memcached-client-close8934975
Node: connector-net-ref-mysqlclient-memcached-client-add8935691
Node: connector-net-ref-mysqlclient-memcached-client-append8936716
Node: connector-net-ref-mysqlclient-memcached-client-cas8937626
Node: connector-net-ref-mysqlclient-memcached-client-decrement8938730
Node: connector-net-ref-mysqlclient-memcached-client-delete8939654
Node: connector-net-ref-mysqlclient-memcached-client-flushall8940463
Node: connector-net-ref-mysqlclient-memcached-client-get8941364
Node: connector-net-ref-mysqlclient-memcached-client-increment8942319
Node: connector-net-ref-mysqlclient-memcached-client-prepend8943244
Node: connector-net-ref-mysqlclient-memcached-client-close-replace8944176
Node: connector-net-ref-mysqlclient-memcached-client-set8945252
Node: connector-net-ref-mysqlclient-memcached-client-getinstance8946264
Node: connector-net-ref-mysqlclient-memcached-binaryclient8947455
Node: connector-net-ref-mysqlclient-memcached-binaryclientmembers8948644
Node: connector-net-ref-mysqlclient-memcached-textclient8951418
Node: connector-net-ref-mysqlclient-memcached-textclientmembers8952574
Node: connector-net-ref-replication8955330
Node: connector-net-ref-replication-replicationmanager8956895
Node: connector-net-ref-replication-replicationmanagermembers8957898
Node: connector-net-ref-replication-replicationmanager-addgroup8960285
Node: connector-net-ref-replication-replicationmanager-addgroup18961363
Node: connector-net-ref-replication-replicationmanager-addgroup28962720
Node: connector-net-ref-replication-replicationmanager-getgroup8964160
Node: connector-net-ref-replication-replicationmanager-getnewconnection8965254
Node: connector-net-ref-replication-replicationmanager-getserver8966628
Node: connector-net-ref-replication-replicationmanager-isreplicationgroup8967890
Node: connector-net-ref-replication-replicationmanager-groups8968972
Node: connector-net-ref-replication-replicationroundrobinservergroup8969944
Node: connector-net-ref-replication-replicationroundrobinservergroupmembers8971162
Node: connector-net-ref-replication-replicationroundrobinservergroup-constructor8975499
Node: connector-net-ref-replication-replicationroundrobinservergroup-getserver8976788
Node: connector-net-ref-replication-replicationroundrobinservergroup-getserver18977813
Node: connector-net-ref-replication-replicationserver8979245
Node: connector-net-ref-replication-replicationservermembers8980222
Node: connector-net-ref-replication-replicationserver-constructor8983199
Node: connector-net-ref-replication-replicationserver-connectionstring8984500
Node: connector-net-ref-replication-replicationserver-isavailable8985454
Node: connector-net-ref-replication-replicationserver-ismaster8986367
Node: connector-net-ref-replication-replicationserver-name8987256
Node: connector-net-ref-replication-replicationservergroup8988031
Node: connector-net-ref-replication-replicationservergroupmembers8989069
Node: connector-net-ref-replication-replicationservergroup-constructor8992769
Node: connector-net-ref-replication-replicationservergroup-addserver8993933
Node: connector-net-ref-replication-replicationservergroup-getserver8995250
Node: connector-net-ref-replication-replicationservergroup-getserver18996368
Node: connector-net-ref-replication-replicationservergroup-getserver28997703
Node: connector-net-ref-replication-replicationservergroup-removeserver8998808
Node: connector-net-ref-replication-replicationservergroup-name8999735
Node: connector-net-ref-replication-replicationservergroup-retrytime9000620
Node: connector-net-ref-replication-replicationservergroup-servers9001549
Node: connector-net-support9002489
Node: connector-net-support-community9003115
Node: connector-net-support-bug-report9003711
Node: connector-net-faq9004789
Ref: qandaitem-23-2-11-1-19005049
Node: connector-j9008391
Node: connector-j-overview9010068
Node: connector-j-versions9011258
Node: connector-j-change-history9014086
Node: connector-j-versions-java9014506
Node: connector-j-installing9016567
Node: connector-j-binary-installation9017740
Node: connector-j-installing-classpath9019588
Node: connector-j-installing-upgrading9022728
Node: connector-j-installing-upgrading-5-19023598
Node: connector-j-installing-upgrading-issues9024885
Node: connector-j-installing-upgrading-3-0-to-3-19026348
Node: connector-j-installing-source9031307
Node: connector-j-examples9035217
Node: connector-j-reference9036205
Node: connector-j-reference-configuration-properties9037197
Node: connector-j-useconfigs9126569
Node: connector-j-reference-implementation-notes9129429
Node: connector-j-reference-type-conversions9139834
Node: connector-j-reference-charsets9146384
Node: connector-j-reference-using-ssl9150330
Node: connector-j-using-pam9158723
Node: connector-j-reference-replication-connection9160215
Node: connector-j-reference-error-sqlstates9164110
Node: connector-j-usagenotes-basic9173520
Node: connector-j-usagenotes-connect-drivermanager9174199
Ref: connector-j-examples-connection-drivermanager9176241
Node: connector-j-usagenotes-statements9177491
Ref: connector-j-examples-execute-select9179237
Node: connector-j-usagenotes-statements-callable9180727
Ref: connector-j-examples-stored-procedure9181887
Ref: connector-j-examples-preparecall9182467
Ref: connector-j-examples-output-param9183546
Ref: connector-j-examples-callablestatement9184838
Ref: connector-j-examples-retrieving-results-params9185860
Node: connector-j-usagenotes-last-insert-id9186583
Ref: connector-j-examples-autoincrement-getgeneratedkeys9188006
Ref: connector-j-examples-autoincrement-select9190039
Ref: connector-j-examples-autoincrement-updateable-resultsets9191847
Node: connector-j-usagenotes-j2ee-concepts-connection-pooling9194378
Ref: connector-j-examples-connectionpool-j2ee9197332
Node: connector-j-usagenotes-j2ee-concepts-managing-load-balanced-connections9205496
Node: connector-j-usagenotes-j2ee-concepts-load-balancing-failover9211635
Node: connector-j-interceptors9217709
Node: connector-j-usagenotes-tomcat9219905
Node: connector-j-usagenotes-jboss9223873
Node: connector-j-usagenotes-spring-config9225457
Node: connector-j-usagenotes-spring-config-jdbctemplate9230667
Node: connector-j-usagenotes-spring-config-transactional9234214
Node: connector-j-usagenotes-spring-config-connpooling9238801
Node: connector-j-usagenotes-glassfish-config9241222
Node: connector-j-usagenotes-glassfish-config-jsp9245721
Node: connector-j-usagenotes-glassfish-config-servlet9251320
Node: connector-j-usagenotes-troubleshooting9257099
Ref: qandaitem-23-3-15-1-19261220
Ref: qandaitem-23-3-15-1-29262551
Ref: qandaitem-23-3-15-1-39263046
Ref: qandaitem-23-3-15-1-49264886
Ref: connector-j-examples-transaction-retry9265741
Ref: qandaitem-23-3-15-1-59270429
Ref: qandaitem-23-3-15-1-69271357
Ref: qandaitem-23-3-15-1-79271834
Ref: qandaitem-23-3-15-1-89273141
Ref: qandaitem-23-3-15-1-99273988
Ref: qandaitem-23-3-15-1-109274398
Ref: qandaitem-23-3-15-1-119275401
Ref: qandaitem-23-3-15-1-129275721
Ref: qandaitem-23-3-15-1-139278161
Ref: qandaitem-23-3-15-1-149281516
Ref: qandaitem-23-3-15-1-159281698
Ref: qandaitem-23-3-15-1-169282045
Node: connector-j-usagenotes-known-issues-limitations9282646
Node: connector-j-support9283390
Node: connector-j-support-community9283724
Node: connector-j-support-bug-report9284638
Node: connector-cpp9289650
Node: connector-cpp-downloading9293573
Node: connector-cpp-installation-binary9294657
Ref: connector-cpp-installer-welcome-figure9298360
Ref: connector-cpp-installer-overview-figure9298706
Ref: connector-cpp-installer-custom-figure9298924
Node: connector-cpp-installation-source9298977
Node: connector-cpp-installation-source-unix9300840
Node: connector-cpp-installation-source-windows9306539
Node: connector-cpp-dynamic-linking-client-library9312835
Node: connector-cpp-apps-windows-visual-studio9315162
Ref: connector-cpp-menu-new-project9316833
Ref: connector-cpp-new-project-wizard9317137
Ref: connector-cpp-win32-application-wizard9317438
Ref: connector-cpp-select-release-build9317608
Ref: connector-cpp-menu-project-properties9317780
Ref: connector-cpp-properties9317960
Ref: connector-cpp-mysql-include-dir9318183
Ref: connector-cpp-mysql-include-select-directory-dialog9318330
Ref: connector-cpp-mysql-lib-opt-dir9318607
Ref: connector-cpp-additional-library-dir9318764
Ref: connector-cpp-additional-lib-dir-select9318975
Ref: connector-cpp-application-build-static9319037
Ref: connector-cpp-additional-dependencies9319436
Ref: connector-cpp-additional-dependencies-added9319542
Ref: connector-cpp-cppconn-public-func9320158
Ref: connector-cpp-application-build-dynamic9320362
Node: connector-cpp-apps-linux-netbeans9321113
Ref: connector-cpp-netbeans9321535
Ref: connector-cpp-netbeans-static-properties-include9323382
Ref: connector-cpp-netbeans-static-properties-lib9325038
Ref: connector-cpp-netbeans-dynamic-properties-lib9325969
Ref: connector-cpp-netbeans-static-run9326408
Node: connector-cpp-getting-started-examples9326665
Node: connector-cpp-examples-connecting9330135
Node: connector-cpp-examples-query9331086
Node: connector-cpp-examples-results9332319
Node: connector-cpp-examples-prepared-statements9333833
Node: connector-cpp-examples-complete-example-19335130
Node: connector-cpp-examples-complete-example-29338416
Node: connector-cpp-tutorials9342013
Node: connector-cpp-tutorials-background9342726
Node: connector-cpp-tutorials-stored-routines-statements9346549
Node: connector-cpp-tutorials-stored-routines-prepared-statements9357969
Node: connector-cpp-debug-tracing9365690
Node: connector-cpp-usage-notes9370086
Node: connector-cpp-bugs9382605
Node: connector-cpp-support9384683
Node: connector-c9385413
Node: connector-c-versions9387055
Node: connector-c-platforms9389419
Node: connector-c-contents9390422
Node: connector-c-installation9393504
Node: connector-c-installation-binary9394727
Node: connector-c-installation-source9398418
Ref: connector-c-building-unix9399952
Ref: connector-c-building-windows9401240
Ref: connector-c-build-options9403671
Node: connector-c-postinstallation9404369
Node: connector-c-testing9405252
Node: connector-c-applications9406546
Node: connector-python9407407
Node: connector-python-coding9409746
Node: connector-python-versions9417141
Node: connector-python-installation9418826
Node: connector-python-installation-binary9420835
Node: connector-python-installation-source-unix9423038
Node: connector-python-installation-source-windows9424736
Node: connector-python-verification9426568
Node: connector-python-examples9427109
Node: connector-python-example-connecting9427817
Node: connector-python-example-ddl9429937
Node: connector-python-example-cursor-transaction9437601
Node: connector-python-example-cursor-select9441294
Node: connector-python-tutorials9444456
Node: connector-python-tutorial-cursorbuffered9444935
Node: connector-python-connectargs9447198
Node: connector-python-other9457606
Node: connector-python-connection-pooling9458189
Node: connector-python-django-backend9463392
Node: connector-python-reference9466102
Node: connector-python-api-mysql-connector9468002
Node: connector-python-api-mysql-connector-connect9468879
Node: connector-python-api-mysql-connector-apilevel9469811
Node: connector-python-api-mysql-connector-paramstyle9470246
Node: connector-python-api-mysql-connector-threadsafety9470715
Node: connector-python-api-mysql-connector-version9471203
Node: connector-python-api-mysql-connector-version-info9471698
Node: connector-python-api-mysqlconnection9472182
Node: connector-python-api-mysqlconnection-constructor9477066
Node: connector-python-api-mysqlconnection-close9477626
Node: connector-python-api-mysqlconnection-commit9478292
Node: connector-python-api-mysqlconnection-config9479121
Node: connector-python-api-mysqlconnection-connect9480106
Node: connector-python-api-mysqlconnection-cursor9481050
Node: connector-python-api-mysqlconnection-cmd-change-user9482387
Node: connector-python-api-mysqlconnection-cmd-debug9483095
Node: connector-python-api-mysqlconnection-cmd-init-db9483610
Node: connector-python-api-mysqlconnection-cmd-ping9484203
Node: connector-python-api-mysqlconnection-cmd-process-info9484839
Node: connector-python-api-mysqlconnection-cmd-process-kill9485353
Node: connector-python-api-mysqlconnection-cmd-query9486036
Node: connector-python-api-mysqlconnection-cmd-query-iter9487026
Node: connector-python-api-mysqlconnection-cmd-quit9488040
Node: connector-python-api-mysqlconnection-cmd-refresh9488545
Node: connector-python-api-mysqlconnection-cmd-shutdown9489375
Node: connector-python-api-mysqlconnection-cmd-statistics9489870
Node: connector-python-api-mysqlconnection-disconnect9490381
Node: connector-python-api-mysqlconnection-get-row9490881
Node: connector-python-api-mysqlconnection-get-rows9491681
Node: connector-python-api-mysqlconnection-get-server-info9492748
Node: connector-python-api-mysqlconnection-get-server-version9493228
Node: connector-python-api-mysqlconnection-is-connected9493676
Node: connector-python-api-mysqlconnection-isset-client-flag9494335
Node: connector-python-api-mysqlconnection-ping9494764
Node: connector-python-api-mysqlconnection-reconnect9495647
Node: connector-python-api-mysqlconnection-rollback9496388
Node: connector-python-api-mysqlconnection-set-charset-collation9497203
Node: connector-python-api-mysqlconnection-set-client-flags9498314
Node: connector-python-api-mysqlconnection-start-transaction9499438
Node: connector-python-api-mysqlconnection-autocommit9500786
Node: connector-python-api-mysqlconnection-charset-name9501793
Node: connector-python-api-mysqlconnection-collation-name9502255
Node: connector-python-api-mysqlconnection-connection-id9502720
Node: connector-python-api-mysqlconnection-database9503192
Node: connector-python-api-mysqlconnection-get-warnings9503792
Node: connector-python-api-mysqlconnection-in-transaction9504813
Node: connector-python-api-mysqlconnection-raise-on-warnings9505744
Node: connector-python-api-mysqlconnection-server-host9507141
Node: connector-python-api-mysqlconnection-server-port9507602
Node: connector-python-api-mysqlconnection-sql-mode9508044
Node: connector-python-api-mysqlconnection-time-zone9509157
Node: connector-python-api-mysqlconnection-unix-socket9509919
Node: connector-python-api-mysqlconnection-user9510353
Node: connector-python-api-mysqlconnectionpool9510716
Node: connector-python-api-mysqlconnectionpool-constructor9511607
Node: connector-python-api-mysqlconnectionpool-add-connection9513094
Node: connector-python-api-mysqlconnectionpool-get-connection9513931
Node: connector-python-api-mysqlconnectionpool-set-config9514493
Node: connector-python-api-mysqlconnectionpool-pool-name9515493
Node: connector-python-api-pooledmysqlconnection9515906
Node: connector-python-api-pooledmysqlconnection-constructor9517575
Node: connector-python-api-pooledmysqlconnection-close9518310
Node: connector-python-api-pooledmysqlconnection-config9519088
Node: connector-python-api-pooledmysqlconnection-pool-name9519589
Node: connector-python-api-mysqlcursor9520075
Node: connector-python-api-mysqlcursor-constructor9522170
Node: connector-python-api-mysqlcursor-callproc9522785
Node: connector-python-api-mysqlcursor-close9524175
Node: connector-python-api-mysqlcursor-execute9524658
Node: connector-python-api-mysqlcursor-executemany9526928
Node: connector-python-api-mysqlcursor-fetchall9528260
Node: connector-python-api-mysqlcursor-fetchmany9529082
Node: connector-python-api-mysqlcursor-fetchone9529838
Node: connector-python-api-mysqlcursor-fetchwarnings9531130
Node: connector-python-api-mysqlcursor-stored-results9532124
Node: connector-python-api-mysqlcursor-column-names9533051
Node: connector-python-api-mysqlcursor-description9533824
Node: connector-python-api-mysqlcursor-lastrowid9535523
Node: connector-python-api-mysqlcursor-statement9536142
Node: connector-python-api-mysqlcursor-with-rows9536708
Node: connector-python-api-mysqlcursorbuffered9537740
Node: connector-python-api-mysqlcursorprepared9538929
Node: connector-python-api-clientflag9541940
Node: connector-python-api-fieldtype9542691
Node: connector-python-api-sqlmode9543901
Node: connector-python-api-characterset9544436
Node: connector-python-api-refreshoption9544914
Node: connector-python-api-errors9546107
Node: connector-python-api-errorcode9549770
Node: connector-python-api-errors-error9550385
Node: connector-python-api-errors-dataerror9553141
Node: connector-python-api-errors-databaseerror9553703
Node: connector-python-api-errors-integrityerror9554141
Node: connector-python-api-errors-interfaceerror9555021
Node: connector-python-api-errors-internalerror9555487
Node: connector-python-api-errors-notsupportederror9555966
Node: connector-python-api-errors-operationalerror9556562
Node: connector-python-api-errors-poolerror9557141
Node: connector-python-api-errors-programmingerror9557533
Node: connector-python-api-errors-warning9558349
Node: connector-python-api-errors-custom-error-exception9559120
Node: libmysqld9560301
Ref: refman-apis-libmysqld-mysql-server-library-embeded-functions9561435
Node: libmysqld-compiling9563168
Node: libmysqld-restrictions9565407
Node: libmysqld-options9566552
Node: libmysqld-example9567859
Node: c-api9574968
Node: c-api-implementations9579698
Node: c-api-multiple-installations9583564
Node: c-api-example-programs9586964
Node: c-api-building-running-clients9587538
Node: c-api-building-clients9588183
Node: c-api-threaded-clients9593389
Node: c-api-running-clients9597291
Node: c-api-data-structures9599892
Node: c-api-function-overview9615581
Node: c-api-functions9635825
Node: mysql-affected-rows9641102
Node: mysql-autocommit9644325
Node: mysql-change-user9644731
Node: mysql-character-set-name9647164
Node: mysql-close9647572
Node: mysql-commit9648096
Node: mysql-connect9648806
Node: mysql-create-db9650254
Node: mysql-data-seek9651301
Node: mysql-debug9652058
Node: mysql-drop-db9652718
Node: mysql-dump-debug-info9653736
Node: mysql-eof9654496
Node: mysql-errno9657544
Node: mysql-error9659098
Node: mysql-escape-string9660425
Node: mysql-fetch-field9661104
Node: mysql-fetch-field-direct9662829
Node: mysql-fetch-fields9663834
Node: mysql-fetch-lengths9664643
Node: mysql-fetch-row9666372
Node: mysql-field-count9668504
Node: mysql-field-seek9670885
Node: mysql-field-tell9671499
Node: mysql-free-result9672030
Node: mysql-get-character-set-info9672720
Node: mysql-get-client-info9673932
Node: mysql-get-client-version9674378
Node: mysql-get-host-info9675050
Node: mysql-get-proto-info9675527
Node: mysql-get-server-info9675979
Node: mysql-get-server-version9676417
Node: mysql-get-ssl-cipher9677093
Node: mysql-hex-string9677681
Node: mysql-info9679617
Node: mysql-init9681160
Node: mysql-insert-id9681982
Node: mysql-kill9686895
Node: mysql-library-end9687700
Node: mysql-library-init9688699
Node: mysql-list-dbs9692743
Node: mysql-list-fields9693886
Node: mysql-list-processes9695640
Node: mysql-list-tables9696595
Node: mysql-more-results9697714
Node: mysql-next-result9698712
Node: mysql-num-fields9702106
Node: mysql-num-rows9704568
Node: mysql-options9705795
Node: mysql-ping9717701
Node: mysql-query9719527
Node: mysql-real-connect9720977
Node: mysql-real-escape-string9733217
Node: mysql-real-query9736278
Node: mysql-refresh9737954
Node: mysql-reload9739725
Node: mysql-rollback9740575
Node: mysql-row-seek9741300
Node: mysql-row-tell9742379
Node: mysql-select-db9743051
Node: mysql-set-character-set9744062
Node: mysql-set-local-infile-default9745276
Node: mysql-set-local-infile-handler9745960
Node: mysql-set-server-option9749808
Node: mysql-shutdown9751976
Node: mysql-sqlstate9753206
Node: mysql-ssl-set9754903
Node: mysql-stat9756203
Node: mysql-store-result9757062
Node: mysql-thread-id9760796
Node: mysql-use-result9761773
Node: mysql-warning-count9765364
Node: c-api-prepared-statements9765763
Node: c-api-prepared-statement-data-structures9767558
Node: c-api-prepared-statement-type-codes9781159
Node: c-api-prepared-statement-type-conversions9788412
Node: c-api-prepared-statement-function-overview9793858
Node: c-api-prepared-statement-functions9804826
Node: mysql-stmt-affected-rows9807020
Node: mysql-stmt-attr-get9807801
Node: mysql-stmt-attr-set9808572
Node: mysql-stmt-bind-param9812393
Node: mysql-stmt-bind-result9813965
Node: mysql-stmt-close9816504
Node: mysql-stmt-data-seek9817330
Node: mysql-stmt-errno9818131
Node: mysql-stmt-error9818919
Node: mysql-stmt-execute9819982
Node: mysql-stmt-fetch9828321
Node: mysql-stmt-fetch-column9840069
Node: mysql-stmt-field-count9841127
Node: mysql-stmt-free-result9841930
Node: mysql-stmt-init9842544
Node: mysql-stmt-insert-id9843179
Node: mysql-stmt-next-result9844096
Node: mysql-stmt-num-rows9846906
Node: mysql-stmt-param-count9848125
Node: mysql-stmt-param-metadata9848687
Node: mysql-stmt-prepare9849069
Node: mysql-stmt-reset9851710
Node: mysql-stmt-result-metadata9852866
Node: mysql-stmt-row-seek9854947
Node: mysql-stmt-row-tell9856107
Node: mysql-stmt-send-long-data9856821
Node: mysql-stmt-sqlstate9861101
Node: mysql-stmt-store-result9862048
Node: c-api-thread-functions9864847
Node: my-init9865430
Node: mysql-thread-end9866518
Node: mysql-thread-init9867068
Node: mysql-thread-safe9867978
Node: c-api-embedded-server-functions9868355
Node: mysql-server-init9869354
Node: mysql-server-end9870009
Node: c-api-plugin-functions9870534
Node: mysql-client-find-plugin9871983
Node: mysql-client-register-plugin9873448
Node: mysql-load-plugin9874552
Node: mysql-load-plugin-v9876847
Node: mysql-plugin-options9877427
Node: c-api-problems9878293
Node: null-mysql-store-result9878810
Node: query-results9880360
Node: getting-unique-id9882129
Node: auto-reconnect9885276
Node: c-api-multiple-queries9888363
Node: c-api-prepared-statement-problems9896323
Node: c-api-prepared-statement-date-handling9897922
Node: c-api-prepared-call-statements9901481
Node: apis-php9912098
Ref: php-api-copyright9914874
Node: apis-php-mysqlinfo9915324
Node: apis-php-mysqlinfo.intro9915838
Node: apis-php-mysqlinfo.terminology9916397
Node: apis-php-mysqlinfo.api.choosing9920118
Node: apis-php-mysqlinfo.library.choosing9924699
Node: apis-php-mysqlinfo.concepts9928702
Node: apis-php-mysqlinfo.concepts.buffering9929115
Node: apis-php-mysqlinfo.concepts.charset9932222
Node: apis-php-book.mysqlnd-ms9934682
Node: apis-php-mysqlnd-ms.key-features9936643
Node: apis-php-mysqlnd-ms.limitations9940382
Node: apis-php-mysqlnd-ms.name9942042
Node: apis-php-mysqlnd-ms.quickstart9942508
Node: apis-php-mysqlnd-ms.quickstart.configuration9944292
Node: apis-php-mysqlnd-ms.quickstart.usage9949766
Node: apis-php-mysqlnd-ms.quickstart.connectionpooling9954172
Node: apis-php-mysqlnd-ms.quickstart.sqlhints9957675
Node: apis-php-mysqlnd-ms.quickstart.transactions9962941
Node: apis-php-mysqlnd-ms.quickstart.qos-consistency9969092
Node: apis-php-mysqlnd-ms.quickstart.gtid9978362
Node: apis-php-mysqlnd-ms.quickstart.cache9992745
Node: apis-php-mysqlnd-ms.quickstart.failover9999835
Node: apis-php-mysqlnd-ms.quickstart.partitioning10002594
Node: apis-php-mysqlnd-ms.concepts10007013
Node: apis-php-mysqlnd-ms.architecture10008290
Node: apis-php-mysqlnd-ms.pooling10010525
Node: apis-php-mysqlnd-ms.transaction10018428
Node: apis-php-mysqlnd-ms.errorhandling10021468
Node: apis-php-mysqlnd-ms.transient_errors10028575
Node: apis-php-mysqlnd-ms.failover10034137
Node: apis-php-mysqlnd-ms.loadbalancing10039070
Node: apis-php-mysqlnd-ms.rwsplit10040514
Node: apis-php-mysqlnd-ms.filter10042645
Node: apis-php-mysqlnd-ms.qos-consistency10048758
Node: apis-php-mysqlnd-ms.gtid10056368
Node: apis-php-mysqlnd-ms.concept_cache10061819
Node: apis-php-mysqlnd-ms.supportedclusters10067992
Node: apis-php-mysqlnd-ms.setup10075974
Node: apis-php-mysqlnd-ms.requirements10076723
Node: apis-php-mysqlnd-ms.installation10077480
Node: apis-php-mysqlnd-ms.configuration10078337
Ref: apis-php-ini.mysqlnd-ms.enable10079306
Ref: apis-php-ini.mysqlnd-ms.force-config-usage10079570
Ref: apis-php-ini.mysqlnd-ms.ini-file10080644
Ref: apis-php-ini.mysqlnd-ms.config-file10080800
Ref: apis-php-ini.mysqlnd-ms.collect-statistics10080942
Ref: apis-php-ini.mysqlnd-ms.multi-master10081244
Ref: apis-php-ini.mysqlnd-ms.disable-rw-split10081450
Node: apis-php-mysqlnd-ms.plugin-ini-json10082495
Ref: apis-php-mysqlnd-ms.plugin-ini-json.using-section10086110
Ref: apis-php-mysqlnd-ms.plugin-ini-json.server-list-syntax10088225
Ref: apis-php-mysqlnd-ms.plugin-ini-json.debug_config10092682
Ref: apis-php-ini.mysqlnd-ms-plugin-config-v2.master10094969
Ref: apis-php-mysqlnd-ms.plugin-ini-json.server-config-keywords10095851
Ref: apis-php-ini.mysqlnd-ms-plugin-config-v2.slave10097101
Ref: apis-php-ini.mysqlnd-ms-plugin-config-v2.gtid10098276
Ref: apis-php-ini.mysqlnd-ms-plugin-config-v2.filters10102235
Ref: apis-php-ini.mysqlnd-ms-plugin-config-v2.filter-random10104984
Ref: apis-php-ini.mysqlnd-ms-plugin-config-v2.filter-roundrobin10110056
Ref: apis-php-ini.mysqlnd-ms-plugin-config-v2.filter-user10111405
Ref: apis-php-ini.mysqlnd-ms-plugin-config-v2.filter-user-multi10121578
Ref: apis-php-ini.mysqlnd-ms-plugin-config-v2.filter-node-groups10124915
Ref: apis-php-ini.mysqlnd-ms-plugin-config-v2.filter-qos10130096
Ref: apis-php-ini.mysqlnd-ms-plugin-config-v2.failover10136800
Ref: apis-php-ini.mysqlnd-ms-plugin-config-v2.lazy-connections10142413
Ref: apis-php-ini.mysqlnd-ms-plugin-config-v2.server-charset10144116
Ref: apis-php-ini.mysqlnd-ms-plugin-config-v2.master-on-write10148033
Ref: apis-php-ini.mysqlnd-ms-plugin-config-v2.trx-stickiness10149476
Ref: apis-php-ini.mysqlnd-ms-plugin-config-v2.transient_error10154684
Node: apis-php-mysqlnd-ms.plugin-ini-v110157588
Ref: apis-php-ini.mysqlnd-ms-plugin-config.master10161287
Ref: apis-php-ini.mysqlnd-ms-plugin-config.slave10161935
Ref: apis-php-ini.mysqlnd-ms-plugin-config.pick10162605
Ref: apis-php-ini.mysqlnd-ms-plugin-config.failover10163805
Ref: apis-php-ini.mysqlnd-ms-plugin-config.lazy-connections10164525
Ref: apis-php-ini.mysqlnd-ms-plugin-config.master-on-write10165980
Ref: apis-php-ini.mysqlnd-ms-plugin-config.trx-stickiness10166556
Node: apis-php-mysqlnd-ms.testing10168152
Node: apis-php-mysqlnd-ms.debugging10170848
Node: apis-php-mysqlnd-ms.monitoring10175530
Node: apis-php-mysqlnd-ms.constants10179326
Ref: apis-php-constant.mysqlnd-ms-master-switch10181669
Ref: apis-php-constant.mysqlnd-ms-slave-switch10181796
Ref: apis-php-constant.mysqlnd-ms-last-used-switch10181929
Ref: apis-php-constant.mysqlnd-ms-query-use-master10182245
Ref: apis-php-constant.mysqlnd-ms-query-use-slave10182551
Ref: apis-php-constant.mysqlnd-ms-query-use-last-used10182854
Ref: apis-php-constant.mysqlnd-ms-qos-consistency-eventual10183272
Ref: apis-php-constant.mysqlnd-ms-qos-consistency-session10183798
Ref: apis-php-constant.mysqlnd-ms-qos-consistency-strong10184108
Ref: apis-php-constant.mysqlnd-ms-qos-option-gtid10184381
Ref: apis-php-constant.mysqlnd-ms-qos-option-age10184585
Ref: apis-php-constant.mysqlnd-ms-version10185355
Ref: apis-php-constant.mysqlnd-ms-version-id10185456
Node: apis-php-ref.mysqlnd-ms10185549
Node: apis-php-function.mysqlnd-ms-get-last-gtid10186369
Node: apis-php-function.mysqlnd-ms-get-last-used-connection10189238
Node: apis-php-function.mysqlnd-ms-get-stats10193795
Node: apis-php-function.mysqlnd-ms-match-wild10209799
Node: apis-php-function.mysqlnd-ms-query-is-select10211833
Node: apis-php-function.mysqlnd-ms-set-qos10214982
Node: apis-php-function.mysqlnd-ms-set-user-pick-server10221708
Node: apis-php-mysqlnd-ms.changes10227959
Node: apis-php-mysqlnd-ms.changes-one-six10228888
Node: apis-php-mysqlnd-ms.changes-one-five10230230
Node: apis-php-mysqlnd-ms.changes-one-four10236344
Node: apis-php-mysqlnd-ms.changes-one-three10239154
Node: apis-php-mysqlnd-ms.changes-one-two10241296
Node: apis-php-mysqlnd-ms.changes-one-one10243679
Node: apis-php-mysqlnd-ms.changes-one-o10247184
Node: apis-php-book.mysqlnd-qc10248132
Node: apis-php-mysqlnd-qc.key-features10249761
Node: apis-php-mysqlnd-qc.limitations10250534
Node: apis-php-mysqlnd-qc.name10251140
Node: apis-php-mysqlnd-qc.quickstart10251690
Node: apis-php-mysqlnd-qc.quickstart.concepts10253225
Node: apis-php-mysqlnd-qc.quickstart.configuration10257980
Node: apis-php-mysqlnd-qc.quickstart.caching10259057
Node: apis-php-mysqlnd-qc.per-query-ttl10268573
Node: apis-php-mysqlnd-qc.pattern-based-caching10273412
Node: apis-php-mysqlnd-qc.slam-defense10277440
Node: apis-php-mysqlnd-qc.cache-candidates10280152
Node: apis-php-mysqlnd-qc.cache-efficiency10284657
Node: apis-php-mysqlnd-qc.set-user-handlers10296460
Node: apis-php-mysqlnd-qc.setup10303972
Node: apis-php-mysqlnd-qc.requirements10304425
Node: apis-php-mysqlnd-qc.installation10305751
Node: apis-php-mysqlnd-qc.configuration10306608
Ref: apis-php-ini.mysqlnd-qc.enable-qc10308342
Ref: apis-php-ini.mysqlnd-qc.ttl10308608
Ref: apis-php-ini.mysqlnd-qc.cache-by-default10308700
Ref: apis-php-ini.mysqlnd-qc.cache-no-table10308947
Ref: apis-php-ini.mysqlnd-qc.use-request-time10309166
Ref: apis-php-ini.mysqlnd-qc.time-statistics10309497
Ref: apis-php-ini.mysqlnd-qc.collect-statistics10309714
Ref: apis-php-ini.mysqlnd-qc.collect-statistics-log-file10310088
Ref: apis-php-ini.mysqlnd-qc.collect-query-trace10310448
Ref: apis-php-ini.mysqlnd-qc.query-trace-bt-depth10310526
Ref: apis-php-ini.mysqlnd-qc.ignore-sql-comments10310625
Ref: apis-php-ini.mysqlnd-qc.slam-defense10310981
Ref: apis-php-ini.mysqlnd-qc.slam-defense-ttl10311196
Ref: apis-php-ini.mysqlnd-qc.collect-normalized-query-trace10311411
Ref: apis-php-ini.mysqlnd-qc.std-data-copy10311659
Ref: apis-php-ini.mysqlnd-qc.apc-prefix10311794
Ref: apis-php-ini.mysqlnd-qc.memc-server10311995
Ref: apis-php-ini.mysqlnd-qc.memc-port10312087
Ref: apis-php-ini.mysqlnd-qc.sqlite-data-file10312179
Node: apis-php-mysqlnd-qc.constants10312330
Ref: apis-php-constant.mysqlnd-qc-enable-switch10314008
Ref: apis-php-constant.mysqlnd-qc-disable-switch10314104
Ref: apis-php-constant.mysqlnd-qc-ttl-switch10314244
Ref: apis-php-constant.mysqlnd-qc-server-id10314339
Ref: apis-php-constant.mysqlnd-qc-condition-meta-schema-pattern10316581
Ref: apis-php-constant.mysqlnd-qc-version10317358
Ref: apis-php-constant.mysqlnd-qc-version-id10317459
Node: apis-php-ref.mysqlnd-qc10317548
Node: apis-php-function.mysqlnd-qc-clear-cache10318675
Node: apis-php-function.mysqlnd-qc-get-available-handlers10319748
Node: apis-php-function.mysqlnd-qc-get-cache-info10321717
Node: apis-php-function.mysqlnd-qc-get-core-stats10331692
Node: apis-php-function.mysqlnd-qc-get-normalized-query-trace-log10342696
Node: apis-php-function.mysqlnd-qc-get-query-trace-log10349293
Node: apis-php-function.mysqlnd-qc-set-cache-condition10356403
Node: apis-php-function.mysqlnd-qc-set-is-select10359332
Node: apis-php-function.mysqlnd-qc-set-storage-handler10363217
Node: apis-php-function.mysqlnd-qc-set-user-handlers10365477
Node: apis-php-mysqlnd-qc.changes10367439
Node: apis-php-mysqlnd-qc.changes-one-two10368092
Node: apis-php-mysqlnd-qc.changes-one-one10368723
Node: apis-php-mysqlnd-qc.changes-one-o10371702
Node: apis-php-book.mysqlnd-uh10372408
Node: apis-php-mysqlnd-uh.security10374952
Node: apis-php-mysqlnd-uh.docs-note10375905
Node: apis-php-mysqlnd-uh.name10376512
Node: apis-php-mysqlnd-uh.quickstart10376876
Node: apis-php-mysqlnd-uh.quickstart.configuration10379278
Node: apis-php-mysqlnd-uh.quickstart.how-it-works10380045
Node: apis-php-mysqlnd-uh.quickstart.proxy-installation10383250
Node: apis-php-mysqlnd-uh.quickstart.query-monitoring10387953
Node: apis-php-mysqlnd-uh.setup10390707
Node: apis-php-mysqlnd-uh.requirements10391208
Node: apis-php-mysqlnd-uh.installation10392285
Node: apis-php-mysqlnd-uh.configuration10393084
Ref: apis-php-ini.mysqlnd-uh.enable10393732
Ref: apis-php-ini.mysqlnd-uh.report-wrong-types10394002
Node: apis-php-mysqlnd-uh.resources10394190
Node: apis-php-mysqlnd-uh.constants10394471
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-sleep10395403
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-quit10395509
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-init-db10395613
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-query10395723
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-field-list10395829
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-create-db10395945
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-drop-db10396059
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-refresh10396169
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-shutdown10396279
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-statistics10396391
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-process-info10396507
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-connect10396627
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-process-kill10396737
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-debug10396857
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-ping10396963
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-time10397067
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-delayed-insert10397171
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-change-user10397295
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-binlog-dump10397413
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-table-dump10397531
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-connect-out10397647
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-register-slaved10397765
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-stmt-prepare10397891
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-stmt-execute10398011
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-stmt-send-long-data10398131
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-stmt-close10398265
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-stmt-reset10398381
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-set-option10398497
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-stmt-fetch10398613
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-daemon10398729
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-com-end10398837
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-prot-greet-packet10399103
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-prot-auth-packet10399215
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-prot-ok-packet10399332
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-prot-eof-packet10399435
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-prot-cmd-packet10399540
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-prot-rset-header-packet10399649
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-prot-rset-fld-packet10399776
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-prot-row-packet10399898
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-prot-stats-packet10400003
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-prepare-resp-packet10400112
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-chg-user-resp-packet10400234
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-prot-last10400361
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-close-explicit10400701
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-close-implicit10400812
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-close-disconnected10400933
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-close-last10401017
Ref: apis-php-constant.mysqlnd-uh-server-option-multi-statements-on10401322
Ref: apis-php-constant.mysqlnd-uh-server-option-multi-statements-off10401436
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-option-opt-connect-timeout10401823
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-option-opt-compress10401925
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-option-opt-named-pipe10402053
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-option-init-command10402174
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-read-default-file10402287
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-read-default-group10402408
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-set-charset-dir10402536
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-set-charset-name10402644
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-local-infile10402730
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-protocol10402849
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-shared-memory-base-name10402945
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-read-timeout10403079
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-write-timeout10403176
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-use-result10403275
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-use-remote-connection10403369
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-use-embedded-connection10403467
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-guess-connection10403567
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-set-client-ip10403640
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-secure-auth10403706
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-report-data-truncation10403770
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-reconnect10403883
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-ssl-verify-server-cert10403988
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-net-cmd-buffer-size10404075
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-net-read-buffer-size10404196
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-ssl-key10404333
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-ssl-cert10404409
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-ssl-ca10404494
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-ssl-capath10404568
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-ssl-cipher10404654
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-ssl-passphrase10404736
Ref: apis-php-constant.mysqlnd-uh-server-option-plugin-dir10404826
Ref: apis-php-constant.mysqlnd-uh-server-option-default-auth10404923
Ref: apis-php-constant.mysqlnd-uh-server-option-set-client-ip10405028
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-max-allowed-packet10405100
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-auth-protocol10405236
Ref: apis-php-constant.mysqlnd-uh-mysqlnd-opt-int-and-float-native10405344
Ref: apis-php-constant.mysqlnd-uh-version10406156
Ref: apis-php-constant.mysqlnd-uh-version-id10406253
Node: apis-php-class.mysqlnduhconnection10406346
Ref: apis-php-mysqlnduhconnection.intro10410999
Ref: apis-php-mysqlnduhconnection.synopsis10410999
Node: apis-php-mysqlnduhconnection.changeuser10415588
Node: apis-php-mysqlnduhconnection.charsetname10417918
Node: apis-php-mysqlnduhconnection.close10419451
Node: apis-php-mysqlnduhconnection.connect10422250
Node: apis-php-mysqlnduhconnection.construct10424960
Node: apis-php-mysqlnduhconnection.endpsession10425589
Node: apis-php-mysqlnduhconnection.escapestring10427094
Node: apis-php-mysqlnduhconnection.getaffectedrows10428957
Node: apis-php-mysqlnduhconnection.geterrornumber10430676
Node: apis-php-mysqlnduhconnection.geterrorstring10432872
Node: apis-php-mysqlnduhconnection.getfieldcount10435385
Node: apis-php-mysqlnduhconnection.gethostinformation10437437
Node: apis-php-mysqlnduhconnection.getlastinsertid10439075
Node: apis-php-mysqlnduhconnection.getlastmessage10440808
Node: apis-php-mysqlnduhconnection.getprotocolinformation10442670
Node: apis-php-mysqlnduhconnection.getserverinformation10444275
Node: apis-php-mysqlnduhconnection.getserverstatistics10445888
Node: apis-php-mysqlnduhconnection.getserverversion10447703
Node: apis-php-mysqlnduhconnection.getsqlstate10449316
Node: apis-php-mysqlnduhconnection.getstatistics10451068
Node: apis-php-mysqlnduhconnection.getthreadid10467897
Node: apis-php-mysqlnduhconnection.getwarningcount10469387
Node: apis-php-mysqlnduhconnection.init10470926
Node: apis-php-mysqlnduhconnection.killconnection10472562
Node: apis-php-mysqlnduhconnection.listfields10474138
Node: apis-php-mysqlnduhconnection.listmethod10476130
Node: apis-php-mysqlnduhconnection.moreresults10478439
Node: apis-php-mysqlnduhconnection.nextresult10480578
Node: apis-php-mysqlnduhconnection.ping10482463
Node: apis-php-mysqlnduhconnection.query10483938
Node: apis-php-mysqlnduhconnection.queryreadresultsetheader10485718
Node: apis-php-mysqlnduhconnection.reapquery10487625
Node: apis-php-mysqlnduhconnection.refreshserver10491035
Node: apis-php-mysqlnduhconnection.restartpsession10492656
Node: apis-php-mysqlnduhconnection.selectdb10494098
Node: apis-php-mysqlnduhconnection.sendclose10495671
Node: apis-php-mysqlnduhconnection.sendquery10497150
Node: apis-php-mysqlnduhconnection.serverdumpdebuginformation10498639
Node: apis-php-mysqlnduhconnection.setautocommit10500281
Node: apis-php-mysqlnduhconnection.setcharset10502042
Node: apis-php-mysqlnduhconnection.setclientoption10503611
Node: apis-php-mysqlnduhconnection.setserveroption10509439
Node: apis-php-mysqlnduhconnection.shutdownserver10511586
Node: apis-php-mysqlnduhconnection.simplecommand10512313
Node: apis-php-mysqlnduhconnection.simplecommandhandleresponse10518642
Node: apis-php-mysqlnduhconnection.sslset10524802
Node: apis-php-mysqlnduhconnection.stmtinit10526866
Node: apis-php-mysqlnduhconnection.storeresult10528877
Node: apis-php-mysqlnduhconnection.txcommit10531178
Node: apis-php-mysqlnduhconnection.txrollback10532582
Node: apis-php-mysqlnduhconnection.useresult10534000
Node: apis-php-class.mysqlnduhpreparedstatement10535817
Ref: apis-php-mysqlnduhpreparedstatement.intro10536478
Ref: apis-php-mysqlnduhpreparedstatement.synopsis10536478
Node: apis-php-mysqlnduhpreparedstatement.construct10536773
Node: apis-php-mysqlnduhpreparedstatement.execute10537452
Node: apis-php-mysqlnduhpreparedstatement.prepare10539325
Node: apis-php-ref.mysqlnd-uh10541375
Node: apis-php-function.mysqlnd-uh-convert-to-mysqlnd10541929
Node: apis-php-function.mysqlnd-uh-set-connection-proxy10544584
Node: apis-php-function.mysqlnd-uh-set-statement-proxy10547570
Node: apis-php-mysqlnd-uh.changes10549167
Node: apis-php-mysqlnd-uh.changes-one-o10549818
Node: apis-php-book.mysqlnd-mux10550654
Node: apis-php-mysqlnd-mux.key-features10552424
Node: apis-php-mysqlnd-mux.limitations10554089
Node: apis-php-mysqlnd-mux.name10554984
Node: apis-php-mysqlnd-mux.concepts10555354
Node: apis-php-mysqlnd-mux.architecture10555943
Node: apis-php-mysqlnd-mux.connection_pool10557616
Node: apis-php-mysqlnd-mux.sharing_connections10558808
Node: apis-php-mysqlnd-mux.setup10560183
Node: apis-php-mysqlnd-mux.requirements10560639
Node: apis-php-mysqlnd-mux.installation10561400
Node: apis-php-mysqlnd-mux.configuration10562049
Ref: apis-php-ini.mysqlnd-mux.enable10562595
Node: apis-php-mysqlnd-mux.constants10562860
Ref: apis-php-constant.mysqlnd-mux-version10563873
Ref: apis-php-constant.mysqlnd-mux-version-id10563975
Node: apis-php-mysqlnd-mux.changes10564069
Node: apis-php-mysqlnd-mux.changes-one-o10564597
Node: apis-php-book.mysqlnd-memcache10565338
Ref: apis-php-mymemflow-figure10566719
Node: apis-php-mysqlnd-memcache.key-features10568081
Node: apis-php-mysqlnd-memcache.limitations10568708
Node: apis-php-mysqlnd-memcache.name10569531
Node: apis-php-mysqlnd-memcache.quickstart10570033
Node: apis-php-mysqlnd-memcache.quickstart.configuration10571011
Node: apis-php-mysqlnd-memcache.quickstart.usage10573281
Node: apis-php-mysqlnd-memcache.setup10575335
Node: apis-php-mysqlnd-memcache.requirements10575828
Node: apis-php-mysqlnd-memcache.installation10576924
Node: apis-php-mysqlnd-memcache.configuration10577815
Ref: apis-php-ini.mysqlnd-memcache.enable10578463
Node: apis-php-mysqlnd-memcache.constants10578978
Ref: apis-php-constant.mysqlnd-memcache-default-regexp10579470
Ref: apis-php-constant.mysqlnd-memcache-version10580489
Ref: apis-php-constant.mysqlnd-memcache-version-id10580592
Node: apis-php-ref.mysqlnd-memcache10580691
Node: apis-php-function.mysqlnd-memcache-get-config10581156
Node: apis-php-function.mysqlnd-memcache-set10589577
Node: apis-php-mysqlnd-memcache.changes10593273
Node: apis-php-mysqlnd-memcache.changes-one-o10593820
Node: connector-php10594484
Node: apis-php-problems10594967
Node: php-mysql-mysqli10596452
Node: apis-perl10597508
Node: apis-python10600027
Node: apis-ruby10600646
Node: apis-ruby-mysqlruby10601474
Node: apis-ruby-rubymysql10601854
Node: apis-tcl10602272
Node: apis-eiffel10602600
Node: extending-mysql10602996
Node: mysql-internals10603376
Node: mysql-threads10604321
Node: mysql-test-suite10607576
Node: plugin-api10610253
Node: plugin-api-characteristics10612551
Node: plugin-api-components10616392
Node: plugin-types10619492
Node: storage-engine-plugins10620380
Node: full-text-plugins10620993
Node: daemon-plugins10625131
Node: information-schema-plugins10625618
Node: semisynchronous-replication-plugins10626236
Node: audit-plugins10627008
Node: authentication-plugins10628859
Node: writing-plugins10629941
Node: writing-plugins-overview10633074
Node: plugin-data-structures10635135
Node: server-plugin-descriptors10640009
Node: plugin-status-system-variables10657476
Node: client-plugin-descriptors10668254
Node: compiling-plugin-libraries10674218
Node: writing-full-text-plugins10677015
Node: writing-daemon-plugins10700734
Node: writing-information-schema-plugins10705055
Node: writing-semisynchronous-replication-plugins10712102
Node: writing-audit-plugins10716659
Ref: audit-plugin-interface-changes10731577
Node: writing-authentication-plugins10732781
Node: writing-authentication-plugins-server-side10737091
Node: writing-authentication-plugins-client-side10746014
Node: writing-authentication-plugins-setup10748794
Node: writing-authentication-plugins-proxy-users10751652
Node: plugin-services10759235
Node: adding-functions10763444
Node: udf-features10766052
Node: adding-udf10766942
Node: udf-calling10773183
Node: udf-aggr-calling10778199
Node: udf-arguments10781712
Node: udf-return-values10788092
Node: udf-compiling10790278
Node: udf-security10796367
Node: adding-native-function10797879
Node: porting10802452
Node: debugging-server10803991
Node: compiling-for-debugging10806285
Node: making-trace-files10808126
Node: making-windows-dumps10810106
Node: using-gdb-on-mysqld10811959
Node: using-stack-trace10815460
Node: using-log-files10820607
Node: reproducible-test-case10823925
Node: debugging-client10826146
Node: dbug-package10827367
Node: mysql-enterprise10836709
Node: mysql-enterprise-monitor10838125
Node: mysql-enterprise-backup10842490
Node: mysql-enterprise-security10844154
Node: mysql-enterprise-audit10845299
Node: mysql-enterprise-thread-pool10846337
Node: workbench10847180
Node: mysql-for-excel10849143
Node: mysql-for-excel-install10850235
Ref: mysql-for-excel-navigation-bar10851649
Node: mysql-for-excel-edit10851703
Ref: mysql-for-excel-edit-table10852542
Node: mysql-for-excel-import10853654
Ref: mysql-for-excel-import-data10855436
Ref: mysql-for-excel-import-data-procedure10856518
Node: mysql-for-excel-append10856597
Ref: mysql-for-excel-append-data-automatic10857346
Ref: mysql-for-excel-append-data-advanced10859683
Node: mysql-for-excel-export10861425
Ref: mysql-for-excel-export-figure10861798
Ref: mysql-for-excel-export-advanced10861986
Node: mysql-for-excel-faq10864219
Ref: qandaitem-27-6-1-110865007
Ref: qandaitem-27-6-1-210865833
Ref: qandaitem-27-6-1-310866320
Ref: qandaitem-27-6-1-410866822
Node: licenses-third-party10867225
Node: license-ant-contrib10874380
Node: license-antlr-310877171
Node: license-antlr-3-310879073
Node: license-boost10880913
Node: license-bouncy-castle-1-710882706
Node: license-c3p0-0-9110884171
Node: license-django-15110884908
Node: license-dtoa10886816
Node: license-libedit10887791
Node: license-findgtest-cmake10893887
Node: license-dbug10896630
Node: license-getarg10898350
Node: license-glib-proxy10900329
Node: license-gnu-gpl-2-010902236
Node: license-gnu-lgpl-2-110922691
Node: license-gnu-libtool10952326
Node: license-gnu-readline10954942
Node: license-google-io-rate-patch10956017
Node: license-google-tcmalloc10958007
Node: license-google-smp-patch10960023
Node: license-jboss-common-jdbc-wrapper10961952
Node: license-lib-sql10962766
Node: license-libaio10963618
Node: license-libevent10963913
Node: license-libiconv-proxy10970703
Node: license-libintl10971404
Node: license-linux-pam10973837
Node: license-lpeg10976222
Node: license-lua10977680
Node: license-luafilesystem10979085
Node: license-md510980500
Node: license-memcached10981514
Node: license-nt-servc10983381
Node: license-openpam10983888
Node: license-openssl-1-010986065
Node: license-paramiko10992719
Node: license-pcre10993381
Node: license-percona-io-threads-patch10996396
Node: license-python10998368
Node: license-redhat-spec-file11035754
Node: license-regex11036726
Node: license-us-secure-hash11038073
Node: license-libstring11040081
Node: license-sha1-in-c11041593
Node: license-slf4j11041912
Node: license-zlib11043428
Node: license-zlib-net11045262
Node: faqs11047142
Node: faqs-general11048290
Ref: qandaitem-B-1-1-111049296
Ref: qandaitem-B-1-1-211050016
Ref: qandaitem-B-1-1-311050685
Ref: qandaitem-B-1-1-411050759
Ref: qandaitem-B-1-1-511051196
Ref: qandaitem-B-1-1-611051653
Ref: qandaitem-B-1-1-711052139
Ref: qandaitem-B-1-1-811052518
Ref: qandaitem-B-1-1-911052704
Ref: qandaitem-B-1-1-1011053024
Ref: qandaitem-B-1-1-1111053441
Node: faqs-storage-engines11053838
Ref: qandaitem-B-2-1-111054424
Ref: qandaitem-B-2-1-211054751
Ref: qandaitem-B-2-1-311055228
Ref: qandaitem-B-2-1-411055300
Ref: qandaitem-B-2-1-511055595
Node: faqs-sql-modes11055972
Ref: qandaitem-B-3-1-111056590
Ref: qandaitem-B-3-1-211056989
Ref: qandaitem-B-3-1-311057163
Ref: qandaitem-B-3-1-411057599
Ref: qandaitem-B-3-1-511057896
Ref: qandaitem-B-3-1-611058224
Ref: qandaitem-B-3-1-711058669
Node: faqs-stored-procs11058894
Ref: qandaitem-B-4-1-111061493
Ref: qandaitem-B-4-1-211061659
Ref: qandaitem-B-4-1-311061785
Ref: qandaitem-B-4-1-411061942
Ref: qandaitem-B-4-1-511062330
Ref: qandaitem-B-4-1-611062808
Ref: qandaitem-B-4-1-711063466
Ref: qandaitem-B-4-1-811064106
Ref: qandaitem-B-4-1-911064239
Ref: qandaitem-B-4-1-1011064314
Ref: qandaitem-B-4-1-1111064489
Ref: qandaitem-B-4-1-1211064611
Ref: qandaitem-B-4-1-1311064809
Ref: qandaitem-B-4-1-1411065004
Ref: qandaitem-B-4-1-1511065453
Ref: qandaitem-B-4-1-1611065541
Ref: qandaitem-B-4-1-1711065723
Ref: qandaitem-B-4-1-1811065810
Ref: qandaitem-B-4-1-1911065958
Ref: qandaitem-B-4-1-2011066283
Ref: qandaitem-B-4-1-2111066792
Ref: qandaitem-B-4-1-2211066959
Ref: qandaitem-B-4-1-2311067267
Ref: qandaitem-B-4-1-2411067638
Ref: qandaitem-B-4-1-2511068057
Ref: qandaitem-B-4-1-2611068812
Ref: qandaitem-B-4-1-2711070142
Ref: qandaitem-B-4-1-2811070320
Node: faqs-triggers11070927
Ref: qandaitem-B-5-1-111072023
Ref: qandaitem-B-5-1-211072120
Ref: qandaitem-B-5-1-311072247
Ref: qandaitem-B-5-1-411072519
Ref: qandaitem-B-5-1-511072737
Ref: qandaitem-B-5-1-611073177
Ref: qandaitem-B-5-1-711073793
Ref: qandaitem-B-5-1-811073929
Ref: qandaitem-B-5-1-911073989
Ref: qandaitem-B-5-1-1011074283
Ref: qandaitem-B-5-1-1111074608
Ref: qandaitem-B-5-1-1211074745
Ref: qandaitem-B-5-1-1311074955
Ref: qandaitem-B-5-1-1411075721
Node: faqs-views11077861
Ref: qandaitem-B-6-1-111078431
Ref: qandaitem-B-6-1-211078519
Ref: qandaitem-B-6-1-311078665
Ref: qandaitem-B-6-1-411078995
Ref: qandaitem-B-6-1-511079052
Ref: qandaitem-B-6-1-611079112
Node: faqs-information-schema11079394
Ref: qandaitem-B-7-1-111080087
Ref: qandaitem-B-7-1-211080210
Ref: qandaitem-B-7-1-311080361
Ref: qandaitem-B-7-1-411080754
Ref: qandaitem-B-7-1-511081132
Node: faqs-migration11081453
Ref: qandaitem-B-8-1-111081858
Ref: qandaitem-B-8-1-211082391
Node: faqs-security11083370
Ref: qandaitem-B-9-1-111084006
Ref: qandaitem-B-9-1-211084569
Ref: qandaitem-B-9-1-311084904
Ref: qandaitem-B-9-1-411085153
Ref: qandaitem-B-9-1-511085257
Node: faqs-mysql-cluster11085361
Ref: qandaitem-B-10-1-111089531
Ref: qandaitem-B-10-1-211092221
Ref: qandaitem-B-10-1-311092724
Ref: qandaitem-B-10-1-411094037
Ref: qandaitem-B-10-1-511094682
Ref: qandaitem-B-10-1-611095422
Ref: qandaitem-B-10-1-711097778
Ref: qandaitem-B-10-1-811100215
Ref: qandaitem-B-10-1-911100724
Ref: qandaitem-B-10-1-1011101668
Ref: qandaitem-B-10-1-1111105023
Ref: qandaitem-B-10-1-1211106120
Ref: qandaitem-B-10-1-1311106702
Ref: qandaitem-B-10-1-1411108681
Ref: qandaitem-B-10-1-1511109761
Ref: qandaitem-B-10-1-1611110574
Ref: qandaitem-B-10-1-1711112182
Ref: qandaitem-B-10-1-1811112831
Ref: qandaitem-B-10-1-1911113228
Ref: qandaitem-B-10-1-2011113514
Ref: qandaitem-B-10-1-2111114248
Ref: qandaitem-B-10-1-2211114742
Ref: qandaitem-B-10-1-2311114946
Ref: qandaitem-B-10-1-2411116819
Ref: qandaitem-B-10-1-2511118875
Ref: qandaitem-B-10-1-2611119431
Ref: qandaitem-B-10-1-2711120333
Ref: qandaitem-B-10-1-2811120975
Ref: qandaitem-B-10-1-2911122781
Ref: qandaitem-B-10-1-3011123855
Ref: qandaitem-B-10-1-3111126192
Ref: qandaitem-B-10-1-3211126434
Ref: qandaitem-B-10-1-3311126910
Ref: qandaitem-B-10-1-3411127415
Ref: qandaitem-B-10-1-3511128117
Ref: qandaitem-B-10-1-3611128489
Ref: qandaitem-B-10-1-3711128920
Ref: qandaitem-B-10-1-3811129477
Ref: qandaitem-B-10-1-3911129752
Ref: qandaitem-B-10-1-4011130246
Node: faqs-cjk11131892
Ref: qandaitem-B-11-1-111134139
Ref: qandaitem-B-11-1-211136968
Ref: qandaitem-B-11-1-311142575
Ref: qandaitem-B-11-1-411143582
Ref: qandaitem-B-11-1-511146460
Ref: qandaitem-B-11-1-611146777
Ref: qandaitem-B-11-1-711147191
Ref: qandaitem-B-11-1-811147428
Ref: qandaitem-B-11-1-911148338
Ref: qandaitem-B-11-1-1011150092
Ref: qandaitem-B-11-1-1111152811
Ref: qandaitem-B-11-1-1211157291
Ref: qandaitem-B-11-1-1311159196
Ref: qandaitem-B-11-1-1411162048
Ref: qandaitem-B-11-1-1511165392
Ref: qandaitem-B-11-1-1611167337
Ref: qandaitem-B-11-1-1711168533
Ref: qandaitem-B-11-1-1811169005
Ref: qandaitem-B-11-1-1911169630
Ref: qandaitem-B-11-1-2011169950
Node: faqs-connectors-apis11170407
Node: faqs-replication11170885
Ref: qandaitem-B-13-1-111172754
Ref: qandaitem-B-13-1-211173593
Ref: qandaitem-B-13-1-311173942
Ref: qandaitem-B-13-1-411175107
Ref: qandaitem-B-13-1-511176109
Ref: qandaitem-B-13-1-611177493
Ref: qandaitem-B-13-1-711178073
Ref: qandaitem-B-13-1-811178295
Ref: qandaitem-B-13-1-911181331
Ref: qandaitem-B-13-1-1011182055
Ref: qandaitem-B-13-1-1111182556
Ref: qandaitem-B-13-1-1211182673
Ref: qandaitem-B-13-1-1311182936
Ref: qandaitem-B-13-1-1411183090
Node: faqs-thread-pool11183255
Ref: qandaitem-B-14-1-111183906
Ref: qandaitem-B-14-1-211184915
Ref: qandaitem-B-14-1-311185626
Ref: qandaitem-B-14-1-411186684
Ref: qandaitem-B-14-1-511187626
Node: error-handling11187869
Node: error-sources11188738
Node: error-types11190464
Node: error-messages-server11192311
Ref: error_er_hashchk11194578
Ref: error_er_nisamchk11194655
Ref: error_er_no11194733
Ref: error_er_yes11194800
Ref: error_er_cant_create_file11194869
Ref: error_er_cant_create_table11194982
Ref: error_er_cant_create_db11195097
Ref: error_er_db_create_exists11195212
Ref: error_er_db_drop_exists11195334
Ref: error_er_db_drop_delete11195459
Ref: error_er_db_drop_rmdir11195590
Ref: error_er_cant_delete_file11195719
Ref: error_er_cant_find_system_rec11195833
Ref: error_er_cant_get_stat11195949
Ref: error_er_cant_get_wd11196061
Ref: error_er_cant_lock11196174
Ref: error_er_cant_open_file11196273
Ref: error_er_file_not_found11196383
Ref: error_er_cant_read_dir11196493
Ref: error_er_cant_set_wd11196603
Ref: error_er_checkread11196713
Ref: error_er_disk_full11196833
Ref: error_er_dup_key11196962
Ref: error_er_error_on_close11197072
Ref: error_er_error_on_read11197183
Ref: error_er_error_on_rename11197294
Ref: error_er_error_on_write11197415
Ref: error_er_file_used11197527
Ref: error_er_filsort_abort11197628
Ref: error_er_form_not_found11197716
Ref: error_er_get_errno11197825
Ref: error_er_illegal_ha11197929
Ref: error_er_key_not_found11198056
Ref: error_er_not_form_file11198157
Ref: error_er_not_keyfile11198268
Ref: error_er_old_keyfile11198393
Ref: error_er_open_as_readonly11198506
Ref: error_er_outofmemory11198608
Ref: error_er_out_of_sortmemory11198748
Ref: error_er_unexpected_eof11198896
Ref: error_er_con_count_error11199028
Ref: error_er_out_of_resources11199126
Ref: error_er_bad_host_error11199397
Ref: error_er_handshake_error11199509
Ref: error_er_dbaccess_denied_error11199600
Ref: error_er_access_denied_error11199733
Ref: error_er_no_db_error11199868
Ref: error_er_unknown_com_error11199962
Ref: error_er_bad_null_error11200057
Ref: error_er_bad_db_error11200160
Ref: error_er_table_exists_error11200256
Ref: error_er_bad_table_error11200362
Ref: error_er_non_uniq_error11200458
Ref: error_er_server_shutdown11200565
Ref: error_er_bad_field_error11200670
Ref: error_er_wrong_field_with_group11200775
Ref: error_er_wrong_group_field11200882
Ref: error_er_wrong_sum_select11200981
Ref: error_er_wrong_value_count11201117
Ref: error_er_too_long_ident11201235
Ref: error_er_dup_fieldname11201344
Ref: error_er_dup_keyname11201446
Ref: error_er_dup_entry11201543
Ref: error_er_wrong_field_spec11201751
Ref: error_er_parse_error11201872
Ref: error_er_empty_query11201969
Ref: error_er_nonuniq_table11202058
Ref: error_er_invalid_default11202162
Ref: error_er_multiple_pri_key11202270
Ref: error_er_too_many_keys11202377
Ref: error_er_too_many_key_parts11202497
Ref: error_er_too_long_key11202628
Ref: error_er_key_column_does_not_exits11202757
Ref: error_er_blob_used_as_key11202883
Ref: error_er_too_big_fieldlength11203043
Ref: error_er_wrong_auto_key11203205
Ref: error_er_ready11203380
Ref: error_er_normal_shutdown11203515
Ref: error_er_got_signal11203612
Ref: error_er_shutdown_complete11203713
Ref: error_er_forcing_close11203814
Ref: error_er_ipsock_error11203932
Ref: error_er_no_such_index11204029
Ref: error_er_wrong_field_terminators11204187
Ref: error_er_blobs_and_no_terminated11204344
Ref: error_er_textfile_not_readable11204510
Ref: error_er_file_exists_error11204668
Ref: error_er_load_info11204772
Ref: error_er_alter_info11204896
Ref: error_er_wrong_sub_key11204997
Ref: error_er_cant_remove_all_fields11205240
Ref: error_er_cant_drop_field_or_key11205399
Ref: error_er_insert_info11205529
Ref: error_er_update_table_used11205645
Ref: error_er_no_such_thread11205791
Ref: error_er_kill_denied_error11205890
Ref: error_er_no_tables_used11206001
Ref: error_er_too_big_set11206092
Ref: error_er_no_unique_logfile11206204
Ref: error_er_table_not_locked_for_write11206331
Ref: error_er_table_not_locked11206484
Ref: error_er_blob_cant_have_default11206605
Ref: error_er_wrong_db_name11206738
Ref: error_er_wrong_table_name11206842
Ref: error_er_too_big_select11206946
Ref: error_er_unknown_error11207179
Ref: error_er_unknown_procedure11207268
Ref: error_er_wrong_paramcount_to_procedure11207370
Ref: error_er_wrong_parameters_to_procedure11207510
Ref: error_er_unknown_table11207645
Ref: error_er_field_specified_twice11207745
Ref: error_er_invalid_group_func_use11207856
Ref: error_er_unsupported_extension11207970
Ref: error_er_table_must_have_columns11208128
Ref: error_er_record_file_full11208249
Ref: error_er_unknown_character_set11208350
Ref: error_er_too_many_tables11208461
Ref: error_er_too_many_fields11208594
Ref: error_er_too_big_rowsize11208688
Ref: error_er_stack_overrun11208918
Ref: error_er_wrong_outer_join11209111
Ref: error_er_null_column_in_index11209259
Ref: error_er_cant_find_udf11209461
Ref: error_er_cant_initialize_udf11209561
Ref: error_er_udf_no_paths11209677
Ref: error_er_udf_exists11209787
Ref: error_er_cant_open_library11209888
Ref: error_er_cant_find_dl_entry11210013
Ref: error_er_function_not_defined11210127
Ref: error_er_host_is_blocked11210238
Ref: error_er_host_not_privileged11210414
Ref: error_er_password_anonymous_user11210552
Ref: error_er_password_not_allowed11210739
Ref: error_er_password_no_match11210932
Ref: error_er_update_info11211057
Ref: error_er_cant_create_thread11211175
Ref: error_er_wrong_value_count_on_row11211402
Ref: error_er_cant_reopen_table11211538
Ref: error_er_invalid_use_of_null11211642
Ref: error_er_regexp_error11211749
Ref: error_er_mix_of_group_func_and_fields11211850
Ref: error_er_nonexisting_grant11212064
Ref: error_er_tableaccess_denied_error11212201
Ref: error_er_columnaccess_denied_error11212338
Ref: error_er_illegal_grant_for_table11212496
Ref: error_er_grant_wrong_host_or_user11212678
Ref: error_er_no_such_table11212811
Ref: error_er_nonexisting_table_grant11212914
Ref: error_er_not_allowed_command11213076
Ref: error_er_syntax_error11213213
Ref: error_er_delayed_cant_change_lock11213426
Ref: error_er_too_many_delayed_threads11213580
Ref: error_er_aborting_connection11213698
Ref: error_er_net_packet_too_large11213830
Ref: error_er_net_read_error_from_pipe11213964
Ref: error_er_net_fcntl_error11214092
Ref: error_er_net_packets_out_of_order11214195
Ref: error_er_net_uncompress_error11214306
Ref: error_er_net_read_error11214429
Ref: error_er_net_read_interrupted11214548
Ref: error_er_net_error_on_write11214672
Ref: error_er_net_write_interrupted11214795
Ref: error_er_too_long_string11214920
Ref: error_er_table_cant_handle_blob11215053
Ref: error_er_table_cant_handle_auto_increment11215191
Ref: error_er_delayed_insert_table_locked11215349
Ref: error_er_wrong_column_name11215526
Ref: error_er_wrong_key_column11215632
Ref: error_er_wrong_mrg_table11215758
Ref: error_er_dup_unique11215940
Ref: error_er_blob_key_without_length11216069
Ref: error_er_primary_cant_have_null11216228
Ref: error_er_too_many_rows11216408
Ref: error_er_requires_primary_key11216521
Ref: error_er_no_raid_compiled11216642
Ref: error_er_update_without_key_in_safe_mode11216776
Ref: error_er_key_does_not_exits11216981
Ref: error_er_check_no_such_table11217098
Ref: error_er_check_not_implemented11217196
Ref: error_er_cant_do_this_during_an_transaction11217331
Ref: error_er_error_during_commit11217498
Ref: error_er_error_during_rollback11217606
Ref: error_er_error_during_flush_logs11217718
Ref: error_er_error_during_checkpoint11217834
Ref: error_er_new_aborting_connection11217950
Ref: error_er_dump_not_implemented11218102
Ref: error_er_flush_master_binlog_closed11218257
Ref: error_er_index_rebuild11218380
Ref: error_er_master11218504
Ref: error_er_master_net_read11218596
Ref: error_er_master_net_write11218703
Ref: error_er_ft_matching_key_not_found11218809
Ref: error_er_lock_or_active_transaction11218947
Ref: error_er_unknown_system_variable11219135
Ref: error_er_crashed_on_usage11219249
Ref: error_er_crashed_on_repair11219382
Ref: error_er_warning_not_complete_rollback11219534
Ref: error_er_trans_cache_full11219697
Ref: error_er_slave_must_stop11219918
Ref: error_er_slave_not_running11220078
Ref: error_er_bad_slave11220238
Ref: error_er_master_info11220397
Ref: error_er_slave_thread11220575
Ref: error_er_too_many_user_connections11220703
Ref: error_er_set_constants_only11220867
Ref: error_er_lock_wait_timeout11220994
Ref: error_er_lock_table_full11221128
Ref: error_er_read_only_transaction11221259
Ref: error_er_drop_db_with_read_lock11221417
Ref: error_er_create_db_with_read_lock11221573
Ref: error_er_wrong_arguments11221733
Ref: error_er_no_permission_to_create_user11221836
Ref: error_er_union_tables_in_different_dir11221976
Ref: error_er_lock_deadlock11222151
Ref: error_er_table_cant_handle_ft11222298
Ref: error_er_cannot_add_foreign11222433
Ref: error_er_no_referenced_row11222547
Ref: error_er_row_is_referenced11222696
Ref: error_er_connect_to_master11222849
Ref: error_er_query_on_master11222959
Ref: error_er_error_when_executing_command11223070
Ref: error_er_wrong_usage11223201
Ref: error_er_wrong_number_of_columns_in_select11223303
Ref: error_er_cant_update_with_readlock11223470
Ref: error_er_mixing_not_allowed11223627
Ref: error_er_dup_argument11223777
Ref: error_er_user_limit_reached11223887
Ref: error_er_specific_access_denied_error11224034
Ref: error_er_local_variable11224215
Ref: error_er_global_variable11224366
Ref: error_er_no_default11224517
Ref: error_er_wrong_value_for_var11224632
Ref: error_er_wrong_type_for_var11224761
Ref: error_er_var_cant_be_read11224882
Ref: error_er_cant_use_option_here11225000
Ref: error_er_not_supported_yet11225116
Ref: error_er_master_fatal_error_reading_binlog11225242
Ref: error_er_slave_ignored_table11225418
Ref: error_er_incorrect_global_local_var11225574
Ref: error_er_wrong_fk_def11225693
Ref: error_er_key_ref_do_not_match_table_ref11225813
Ref: error_er_operand_columns11225956
Ref: error_er_subquery_no_1_row11226069
Ref: error_er_unknown_stmt_handler11226181
Ref: error_er_corrupt_help_db11226317
Ref: error_er_cyclic_reference11226437
Ref: error_er_auto_convert11226546
Ref: error_er_illegal_reference11226657
Ref: error_er_derived_must_have_alias11226770
Ref: error_er_select_reduced11226899
Ref: error_er_tablename_not_allowed_here11227017
Ref: error_er_not_supported_auth_mode11227161
Ref: error_er_spatial_cant_have_null11227352
Ref: error_er_collation_charset_mismatch11227482
Ref: error_er_slave_was_running11227621
Ref: error_er_slave_was_not_running11227725
Ref: error_er_too_big_for_uncompress11227839
Ref: error_er_zlib_z_mem_error11228039
Ref: error_er_zlib_z_buf_error11228141
Ref: error_er_zlib_z_data_error11228321
Ref: error_er_cut_value_group_concat11228427
Ref: error_er_warn_too_few_records11228544
Ref: error_er_warn_too_many_records11228671
Ref: error_er_warn_null_to_notnull11228835
Ref: error_er_warn_data_out_of_range11229000
Ref: error_warn_data_truncated11229130
Ref: error_er_warn_using_other_handler11229250
Ref: error_er_cant_aggregate_2collations11229375
Ref: error_er_drop_user11229533
Ref: error_er_revoke_grants11229651
Ref: error_er_cant_aggregate_3collations11229798
Ref: error_er_cant_aggregate_ncollations11229962
Ref: error_er_variable_is_not_struct11230095
Ref: error_er_unknown_collation11230264
Ref: error_er_slave_ignored_ssl_params11230367
Ref: error_er_server_is_in_secure_auth_mode11230624
Ref: error_er_warn_field_resolved11230863
Ref: error_er_bad_slave_until_cond11231022
Ref: error_er_missing_skip_slave11231180
Ref: error_er_until_cond_ignored11231454
Ref: error_er_wrong_name_for_index11231600
Ref: error_er_wrong_name_for_catalog11231708
Ref: error_er_warn_qc_resize11231820
Ref: error_er_bad_ft_column11231965
Ref: error_er_unknown_key_cache11232085
Ref: error_er_warn_hostname_wont_work11232187
Ref: error_er_unknown_storage_engine11232385
Ref: error_er_warn_deprecated_syntax11232497
Ref: error_er_non_updatable_table11232668
Ref: error_er_feature_disabled11232796
Ref: error_er_option_prevents_statement11232959
Ref: error_er_duplicated_value_in_type11233134
Ref: error_er_truncated_wrong_value11233264
Ref: error_er_too_much_auto_timestamp_cols11233382
Ref: error_er_invalid_on_update11233608
Ref: error_er_unsupported_ps11233728
Ref: error_er_get_errmsg11233878
Ref: error_er_get_temporary_errmsg11233976
Ref: error_er_unknown_time_zone11234094
Ref: error_er_warn_invalid_timestamp11234210
Ref: error_er_invalid_character_string11234344
Ref: error_er_warn_allowed_packet_overflowed11234464
Ref: error_er_conflicting_declarations11234634
Ref: error_er_sp_no_recursive_create11234764
Ref: error_er_sp_already_exists11234901
Ref: error_er_sp_does_not_exist11235001
Ref: error_er_sp_drop_failed11235101
Ref: error_er_sp_store_failed11235198
Ref: error_er_sp_lilabel_mismatch11235298
Ref: error_er_sp_label_redefine11235409
Ref: error_er_sp_label_mismatch11235508
Ref: error_er_sp_uninit_var11235614
Ref: error_er_sp_badselect11235728
Ref: error_er_sp_badreturn11235867
Ref: error_er_sp_badstatement11235978
Ref: error_er_update_log_deprecated_ignored11236094
Ref: error_er_update_log_deprecated_translated11236340
Ref: error_er_query_interrupted11236611
Ref: error_er_sp_wrong_no_of_args11236722
Ref: error_er_sp_cond_mismatch11236869
Ref: error_er_sp_noreturn11236971
Ref: error_er_sp_noreturnend11237075
Ref: error_er_sp_bad_cursor_query11237184
Ref: error_er_sp_bad_cursor_select11237299
Ref: error_er_sp_cursor_mismatch11237414
Ref: error_er_sp_cursor_already_open11237515
Ref: error_er_sp_cursor_not_open11237622
Ref: error_er_sp_undeclared_var11237721
Ref: error_er_sp_wrong_no_of_fetch_args11237824
Ref: error_er_sp_fetch_no_data11237947
Ref: error_er_sp_dup_param11238077
Ref: error_er_sp_dup_var11238175
Ref: error_er_sp_dup_cond11238270
Ref: error_er_sp_dup_curs11238367
Ref: error_er_sp_cant_alter11238461
Ref: error_er_sp_subselect_nyi11238558
Ref: error_er_stmt_not_allowed_in_sf_or_trg11238665
Ref: error_er_sp_varcond_after_curshndlr11238809
Ref: error_er_sp_cursor_after_handler11238972
Ref: error_er_sp_case_not_found11239102
Ref: error_er_fparser_too_big_file11239215
Ref: error_er_fparser_bad_header11239332
Ref: error_er_fparser_eof_in_comment11239452
Ref: error_er_fparser_error_in_parameter11239586
Ref: error_er_fparser_eof_in_unknown_parameter11239722
Ref: error_er_view_no_explain11239887
Ref: error_er_frm_unknown_type11240041
Ref: error_er_wrong_object11240165
Ref: error_er_nonupdateable_column11240257
Ref: error_er_view_select_derived11240368
Ref: error_er_view_select_clause11240502
Ref: error_er_view_select_variable11240619
Ref: error_er_view_select_tmptable11240748
Ref: error_er_view_wrong_list11240877
Ref: error_er_warn_view_merge11241024
Ref: error_er_warn_view_without_key11241184
Ref: error_er_view_invalid11241344
Ref: error_er_sp_no_drop_sp11241543
Ref: error_er_sp_goto_in_hndlr11241683
Ref: error_er_trg_already_exists11241811
Ref: error_er_trg_does_not_exist11241914
Ref: error_er_trg_on_view_or_temp_table11242017
Ref: error_er_trg_cant_change_row11242146
Ref: error_er_trg_no_such_row_in_trg11242274
Ref: error_er_no_default_for_field11242391
Ref: error_er_division_by_zero11242513
Ref: error_er_truncated_wrong_value_for_field11242605
Ref: error_er_illegal_value_for_type11242755
Ref: error_er_view_nonupd_check11242882
Ref: error_er_view_check_failed11243004
Ref: error_er_procaccess_denied_error11243111
Ref: error_er_relay_log_fail11243249
Ref: error_er_passwd_length11243359
Ref: error_er_unknown_target_binlog11243488
Ref: error_er_io_err_log_index_read11243608
Ref: error_er_binlog_purge_prohibited11243724
Ref: error_er_fseek_fail11243859
Ref: error_er_binlog_purge_fatal_err11243949
Ref: error_er_log_in_use11244062
Ref: error_er_log_purge_unknown_err11244176
Ref: error_er_relay_log_init11244290
Ref: error_er_no_binary_logging11244409
Ref: error_er_reserved_syntax11244521
Ref: error_er_wsas_failed11244673
Ref: error_er_diff_groups_proc11244764
Ref: error_er_no_group_for_proc11244892
Ref: error_er_order_with_proc11245016
Ref: error_er_logging_prohibit_changing_of11245136
Ref: error_er_no_file_mapping11245304
Ref: error_er_wrong_magic11245411
Ref: error_er_ps_many_param11245502
Ref: error_er_key_part_011245627
Ref: error_er_view_checksum11245732
Ref: error_er_view_multiupdate11245833
Ref: error_er_view_no_insert_field_list11245984
Ref: error_er_view_delete_merge_view11246129
Ref: error_er_cannot_user11246251
Ref: error_er_xaer_nota11246351
Ref: error_er_xaer_inval11246445
Ref: error_er_xaer_rmfail11246572
Ref: error_er_xaer_outside11246737
Ref: error_er_xaer_rmerr11246870
Ref: error_er_xa_rbrollback11247040
Ref: error_er_nonexisting_proc_grant11247165
Ref: error_er_proc_auto_grant_fail11247328
Ref: error_er_proc_auto_revoke_fail11247463
Ref: error_er_data_too_long11247597
Ref: error_er_sp_bad_sqlstate11247713
Ref: error_er_startup11247809
Ref: error_er_load_from_fixed_size_rows_to_var11247949
Ref: error_er_cant_create_user_with_grant11248113
Ref: error_er_wrong_value_for_type11248250
Ref: error_er_table_def_changed11248373
Ref: error_er_sp_dup_handler11248507
Ref: error_er_sp_not_var_arg11248628
Ref: error_er_sp_no_retset11248808
Ref: error_er_cant_create_geometry_object11248927
Ref: error_er_failed_routine_break_binlog11249089
Ref: error_er_binlog_unsafe_routine11249383
Ref: error_er_binlog_create_routine_need_super11249678
Ref: error_er_exec_stmt_with_open_cursor11249934
Ref: error_er_stmt_has_no_open_cursor11250149
Ref: error_er_commit_not_allowed_in_sf_or_trg11250274
Ref: error_er_no_default_for_view_field11250451
Ref: error_er_sp_no_recursion11250611
Ref: error_er_too_big_scale11250745
Ref: error_er_too_big_precision11250885
Ref: error_er_m_bigger_than_d11251033
Ref: error_er_wrong_lock_of_system_table11251190
Ref: error_er_connect_to_foreign_data_source11251364
Ref: error_er_query_on_foreign_data_source11251506
Ref: error_er_foreign_data_source_doesnt_exist11251697
Ref: error_er_foreign_data_string_invalid_cant_create11251891
Ref: error_er_foreign_data_string_invalid11252100
Ref: error_er_cant_create_federated_table11252262
Ref: error_er_trg_in_wrong_schema11252408
Ref: error_er_stack_overrun_need_more11252513
Ref: error_er_too_long_body11252744
Ref: error_er_warn_cant_drop_default_keycache11252853
Ref: error_er_too_big_displaywidth11252980
Ref: error_er_xaer_dupid11253117
Ref: error_er_datetime_function_overflow11253224
Ref: error_er_cant_update_used_table_in_sf_or_trg11253349
Ref: error_er_view_prevent_update11253596
Ref: error_er_ps_no_recursion11253748
Ref: error_er_sp_cant_set_autocommit11254001
Ref: error_er_malformed_definer11254154
Ref: error_er_view_frm_no_user11254264
Ref: error_er_view_other_user11254468
Ref: error_er_no_such_user11254620
Ref: error_er_forbid_schema_change11254753
Ref: error_er_row_is_referenced_211254885
Ref: error_er_no_referenced_row_211255045
Ref: error_er_sp_bad_var_shadow11255201
Ref: error_er_trg_no_definer11255332
Ref: error_er_old_file_format11255601
Ref: error_er_sp_recursion_limit11255747
Ref: error_er_sp_proc_table_corrupt11255927
Ref: error_er_sp_wrong_name11256124
Ref: error_er_table_needs_upgrade11256227
Ref: error_er_sp_no_aggregate11256393
Ref: error_er_max_prepared_stmt_count_reached11256518
Ref: error_er_view_recursive11256700
Ref: error_er_non_grouping_field_used11256810
Ref: error_er_table_cant_handle_spkeys11256940
Ref: error_er_no_triggers_on_system_schema11257078
Ref: error_er_removed_spaces11257218
Ref: error_er_autoinc_read_failed11257336
Ref: error_er_username11257473
Ref: error_er_hostname11257553
Ref: error_er_wrong_string_length11257633
Ref: error_er_non_insertable_table11257780
Ref: error_er_admin_wrong_mrg_table11257915
Ref: error_er_too_high_level_of_nesting_for_select11258076
Ref: error_er_name_becomes_empty11258216
Ref: error_er_ambiguous_field_term11258319
Ref: error_er_foreign_server_exists11258525
Ref: error_er_foreign_server_doesnt_exist11258678
Ref: error_er_illegal_ha_create_option11258862
Ref: error_er_partition_requires_values_error11259019
Ref: error_er_partition_wrong_values_error11259204
Ref: error_er_partition_maxvalue_error11259367
Ref: error_er_partition_subpartition_error11259508
Ref: error_er_partition_subpart_mix_error11259656
Ref: error_er_partition_wrong_no_part_error11259814
Ref: error_er_partition_wrong_no_subpart_error11259982
Ref: error_er_const_expr_in_partition_func_error11260156
Ref: error_er_wrong_expr_in_partition_func_error11260522
Ref: error_er_no_const_expr_in_range_or_list_error11260913
Ref: error_er_field_not_found_part_error11261065
Ref: error_er_list_of_fields_only_in_hash_error11261224
Ref: error_er_inconsistent_partition_info_error11261373
Ref: error_er_partition_func_not_allowed_error11261574
Ref: error_er_partitions_must_be_defined_error11261712
Ref: error_er_range_not_increasing_error11261860
Ref: error_er_inconsistent_type_of_functions_error11262023
Ref: error_er_multiple_def_const_in_list_part_error11262182
Ref: error_er_partition_entry_error11262344
Ref: error_er_mix_handler_error11262477
Ref: error_er_partition_not_defined_error11262639
Ref: error_er_too_many_partitions_error11262793
Ref: error_er_subpartition_error11262939
Ref: error_er_cant_create_handler_file11263122
Ref: error_er_blob_field_in_part_func_error11263247
Ref: error_er_unique_key_need_all_fields_in_pf11263393
Ref: error_er_no_parts_error11263564
Ref: error_er_partition_mgmt_on_nonpartitioned11263681
Ref: error_er_foreign_key_on_partitioned11263849
Ref: error_er_drop_partition_non_existent11264015
Ref: error_er_drop_last_partition11264138
Ref: error_er_coalesce_only_on_hash_partition11264272
Ref: error_er_reorg_hash_only_on_same_no11264429
Ref: error_er_reorg_no_param_error11264613
Ref: error_er_only_on_range_list_partition11264806
Ref: error_er_add_partition_subpart_error11264956
Ref: error_er_add_partition_no_new_partition11265112
Ref: error_er_coalesce_partition_no_partition11265246
Ref: error_er_reorg_partition_not_exist11265385
Ref: error_er_same_name_partition11265528
Ref: error_er_no_binlog_error11265637
Ref: error_er_consecutive_reorg_partitions11265767
Ref: error_er_reorg_outside_range11265939
Ref: error_er_partition_function_failure11266139
Ref: error_er_part_state_error11266298
Ref: error_er_limited_part_range11266434
Ref: error_er_plugin_is_not_loaded11266569
Ref: error_er_wrong_value11266677
Ref: error_er_no_partition_for_given_value11266775
Ref: error_er_filegroup_option_only_once11266906
Ref: error_er_create_filegroup_failed11267041
Ref: error_er_drop_filegroup_failed11267146
Ref: error_er_tablespace_auto_extend_error11267247
Ref: error_er_wrong_size_number11267396
Ref: error_er_size_overflow_error11267557
Ref: error_er_alter_filegroup_failed11267731
Ref: error_er_binlog_row_logging_failed11267835
Ref: error_er_binlog_row_wrong_table_def11267973
Ref: error_er_binlog_row_rbr_to_sbr11268117
Ref: error_er_event_already_exists11268329
Ref: error_er_event_store_failed11268437
Ref: error_er_event_does_not_exist11268583
Ref: error_er_event_cant_alter11268684
Ref: error_er_event_drop_failed11268789
Ref: error_er_event_interval_not_positive_or_too_big11268886
Ref: error_er_event_ends_before_starts11269034
Ref: error_er_event_exec_time_in_the_past11269160
Ref: error_er_event_open_table_failed11269315
Ref: error_er_event_neither_m_expr_nor_m_at11269427
Ref: error_er_col_count_doesnt_match_corrupted11269555
Ref: error_er_cannot_load_from_table11269749
Ref: error_er_event_cannot_delete11269892
Ref: error_er_event_compile_error11270017
Ref: error_er_event_same_name11270139
Ref: error_er_event_data_too_long11270244
Ref: error_er_drop_index_fk11270355
Ref: error_er_warn_deprecated_syntax_with_ver11270489
Ref: error_er_cant_write_lock_log_table11270677
Ref: error_er_cant_lock_log_table11270832
Ref: error_er_foreign_duplicate_key11270950
Ref: error_er_col_count_doesnt_match_please_update11271139
Ref: error_er_temp_table_prevents_switch_out_of_rbr11271393
Ref: error_er_stored_function_prevents_switch_binlog_format11271598
Ref: error_er_ndb_cant_switch_binlog_format11271791
Ref: error_er_partition_no_temporary11271974
Ref: error_er_partition_const_domain_error11272104
Ref: error_er_partition_function_is_not_allowed11272254
Ref: error_er_ddl_log_error11272393
Ref: error_er_null_in_values_less_than11272485
Ref: error_er_wrong_partition_name11272621
Ref: error_er_cant_change_tx_isolation11272728
Ref: error_er_dup_entry_autoincrement_case11272899
Ref: error_er_event_modify_queue_error11273094
Ref: error_er_event_set_var_error11273208
Ref: error_er_partition_merge_error11273357
Ref: error_er_cant_activate_log11273484
Ref: error_er_rbr_not_available11273588
Ref: error_er_base64_decode_error11273719
Ref: error_er_event_recursion_forbidden11273833
Ref: error_er_events_db_error11273993
Ref: error_er_only_integers_allowed11274171
Ref: error_er_unsuported_log_engine11274291
Ref: error_er_bad_log_statement11274425
Ref: error_er_cant_rename_log_table11274554
Ref: error_er_wrong_paramcount_to_native_fct11274803
Ref: error_er_wrong_parameters_to_native_fct11274967
Ref: error_er_wrong_parameters_to_stored_fct11275121
Ref: error_er_native_fct_name_collision11275275
Ref: error_er_dup_entry_with_key_name11275420
Ref: error_er_binlog_purge_emfile11275612
Ref: error_er_event_cannot_create_in_the_past11275749
Ref: error_er_event_cannot_alter_in_the_past11275977
Ref: error_er_slave_incident11276204
Ref: error_er_no_partition_for_given_value_silent11276331
Ref: error_er_binlog_unsafe_statement11276481
Ref: error_er_slave_fatal_error11276673
Ref: error_er_slave_relay_log_read_failure11276768
Ref: error_er_slave_relay_log_write_failure11276890
Ref: error_er_slave_create_event_failure11277014
Ref: error_er_slave_master_com_failure11277122
Ref: error_er_binlog_logging_impossible11277237
Ref: error_er_view_no_creation_ctx11277365
Ref: error_er_view_invalid_creation_ctx11277486
Ref: error_er_sr_invalid_creation_ctx11277619
Ref: error_er_trg_corrupted_file11277760
Ref: error_er_trg_no_creation_ctx11277879
Ref: error_er_trg_invalid_creation_ctx11278014
Ref: error_er_event_invalid_creation_ctx11278155
Ref: error_er_trg_cant_open_table11278290
Ref: error_er_cant_create_sroutine11278411
Ref: error_er_slave_ambigous_exec_mode11278543
Ref: error_er_never_used11278811
Ref: error_er_no_format_description_event_before_binlog_statement11279051
Ref: error_er_slave_corrupt_event11279267
Ref: error_er_load_data_invalid_column11279389
Ref: error_er_log_purge_no_file11279518
Ref: error_er_xa_rbtimeout11279631
Ref: error_er_xa_rbdeadlock11279774
Ref: error_er_need_reprepare11279927
Ref: error_er_delayed_not_supported11280046
Ref: error_warn_no_master_info11280173
Ref: error_warn_option_ignored11280292
Ref: error_warn_plugin_delete_builtin11280390
Ref: error_warn_plugin_busy11280510
Ref: error_er_variable_is_readonly11280636
Ref: error_er_warn_engine_transaction_rollback11280785
Ref: error_er_slave_heartbeat_failure11280999
Ref: error_er_slave_heartbeat_value_out_of_range11281123
Ref: error_er_ndb_replication_schema_error11281338
Ref: error_er_conflict_fn_parse_error11281489
Ref: error_er_exceptions_write_error11281622
Ref: error_er_too_long_table_comment11281753
Ref: error_er_too_long_field_comment11281884
Ref: error_er_func_inexistent_name_collision11282015
Ref: error_er_database_name11282226
Ref: error_er_table_name11282310
Ref: error_er_partition_name11282388
Ref: error_er_subpartition_name11282474
Ref: error_er_temporary_name11282566
Ref: error_er_renamed_name11282652
Ref: error_er_too_many_concurrent_trxs11282734
Ref: error_warn_non_ascii_separator_not_implemented11282860
Ref: error_er_debug_sync_timeout11283018
Ref: error_er_debug_sync_hit_limit11283130
Ref: error_er_dup_signal_set11283247
Ref: error_er_signal_warn11283365
Ref: error_er_signal_not_found11283479
Ref: error_er_signal_exception11283600
Ref: error_er_resignal_without_active_handler11283721
Ref: error_er_signal_bad_condition_type11283852
Ref: error_warn_cond_item_truncated11284007
Ref: error_er_cond_item_too_long11284129
Ref: error_er_unknown_locale11284247
Ref: error_er_slave_ignore_server_ids11284344
Ref: error_er_query_cache_disabled11284525
Ref: error_er_same_name_partition_field11284693
Ref: error_er_partition_column_list_error11284816
Ref: error_er_wrong_type_column_value_error11284961
Ref: error_er_too_many_partition_func_fields_error11285099
Ref: error_er_maxvalue_in_values_in11285226
Ref: error_er_too_many_values_error11285351
Ref: error_er_row_single_partition_field_error11285504
Ref: error_er_field_type_not_allowed_as_partition_field11285686
Ref: error_er_partition_fields_too_long11285865
Ref: error_er_binlog_row_engine_and_stmt_engine11286009
Ref: error_er_binlog_row_mode_and_stmt_engine11286328
Ref: error_er_binlog_unsafe_and_stmt_engine11286671
Ref: error_er_binlog_row_injection_and_stmt_engine11287014
Ref: error_er_binlog_stmt_mode_and_row_engine11287374
Ref: error_er_binlog_row_injection_and_stmt_mode11287719
Ref: error_er_binlog_multiple_engines_and_self_logging_engine11288020
Ref: error_er_binlog_unsafe_limit11288373
Ref: error_er_binlog_unsafe_insert_delayed11288645
Ref: error_er_binlog_unsafe_system_table11288948
Ref: error_er_binlog_unsafe_autoinc_columns11289273
Ref: error_er_binlog_unsafe_udf11289603
Ref: error_er_binlog_unsafe_system_variable11289833
Ref: error_er_binlog_unsafe_system_function11290100
Ref: error_er_binlog_unsafe_nontrans_after_trans11290369
Ref: error_er_message_and_statement11290684
Ref: error_er_slave_conversion_failed11290842
Ref: error_er_slave_cant_create_conversion11291067
Ref: error_er_inside_transaction_prevents_switch_binlog_format11291275
Ref: error_er_path_length11291539
Ref: error_er_warn_deprecated_syntax_no_replacement11291699
Ref: error_er_wrong_native_table_structure11291942
Ref: error_er_wrong_perfschema_usage11292149
Ref: error_er_warn_i_s_skipped_table11292326
Ref: error_er_inside_transaction_prevents_switch_binlog_direct11292569
Ref: error_er_stored_function_prevents_switch_binlog_direct11292869
Ref: error_er_spatial_must_have_geom_col11293146
Ref: error_er_too_long_index_comment11293356
Ref: error_er_lock_aborted11293546
Ref: error_er_data_out_of_range11293728
Ref: error_er_wrong_spvar_type_in_limit11293894
Ref: error_er_binlog_unsafe_multiple_engines_and_self_logging_engine11294098
Ref: error_er_binlog_unsafe_mixed_statement11294395
Ref: error_er_inside_transaction_prevents_switch_sql_log_bin11294676
Ref: error_er_stored_function_prevents_switch_sql_log_bin11294934
Ref: error_er_failed_read_from_par_file11295200
Ref: error_er_values_is_not_int_type_error11295383
Ref: error_er_access_denied_no_password_error11295594
Ref: error_er_set_password_auth_plugin11295793
Ref: error_er_grant_plugin_user_exists11296015
Ref: error_er_truncate_illegal_fk11296243
Ref: error_er_plugin_is_permanent11296453
Ref: error_er_slave_heartbeat_value_out_of_range_min11296655
Ref: error_er_slave_heartbeat_value_out_of_range_max11297004
Ref: error_er_stmt_cache_full11297359
Ref: error_er_multi_update_key_conflict11297629
Ref: error_er_table_needs_rebuild11297882
Ref: error_warn_option_below_limit11298110
Ref: error_er_index_column_too_long11298309
Ref: error_er_error_in_trigger_body11298523
Ref: error_er_error_in_unknown_trigger_body11298709
Ref: error_er_index_corrupt11298919
Ref: error_er_undo_record_too_big11299067
Ref: error_er_binlog_unsafe_insert_ignore_select11299233
Ref: error_er_binlog_unsafe_insert_select_update11299630
Ref: error_er_binlog_unsafe_replace_select11300047
Ref: error_er_binlog_unsafe_create_ignore_select11300427
Ref: error_er_binlog_unsafe_create_replace_select11300824
Ref: error_er_binlog_unsafe_update_ignore11301225
Ref: error_er_plugin_no_uninstall11301572
Ref: error_er_plugin_no_install11301816
Ref: error_er_binlog_unsafe_write_autoinc_select11302052
Ref: error_er_binlog_unsafe_create_select_autoinc11302515
Ref: error_er_binlog_unsafe_insert_two_keys11302963
Ref: error_er_table_in_fk_check11303216
Ref: error_er_unsupported_engine11303392
Ref: error_er_binlog_unsafe_autoinc_not_first11303593
Node: error-messages-client11303859
Ref: error_cr_unknown_error11304619
Ref: error_cr_socket_create_error11304696
Ref: error_cr_connection_error11304789
Ref: error_cr_conn_host_error11304915
Ref: error_cr_ipsock_error11305017
Ref: error_cr_unknown_host11305105
Ref: error_cr_server_gone_error11305197
Ref: error_cr_version_error11305285
Ref: error_cr_out_of_memory11305407
Ref: error_cr_wrong_host_info11305495
Ref: error_cr_localhost_connection11305570
Ref: error_cr_tcp_connection11305660
Ref: error_cr_server_handshake_err11305732
Ref: error_cr_server_lost11305822
Ref: error_cr_commands_out_of_sync11305922
Ref: error_cr_namedpipe_connection11306039
Ref: error_cr_namedpipewait_error11306118
Ref: error_cr_namedpipeopen_error11306234
Ref: error_cr_namedpipesetstate_error11306346
Ref: error_cr_cant_read_charset11306470
Ref: error_cr_net_packet_too_large11306576
Ref: error_cr_embedded_connection11306690
Ref: error_cr_probe_slave_status11306769
Ref: error_cr_probe_slave_hosts11306859
Ref: error_cr_probe_slave_connect11306947
Ref: error_cr_probe_master_connect11307037
Ref: error_cr_ssl_connection_error11307129
Ref: error_cr_malformed_packet11307218
Ref: error_cr_wrong_license11307295
Ref: error_cr_null_pointer11307441
Ref: error_cr_no_prepare_stmt11307525
Ref: error_cr_params_not_bound11307607
Ref: error_cr_data_truncated11307721
Ref: error_cr_no_parameters_exists11307794
Ref: error_cr_invalid_parameter_no11307895
Ref: error_cr_invalid_buffer_use11307984
Ref: error_cr_unsupported_param_type11308125
Ref: error_cr_shared_memory_connection11308241
Ref: error_cr_shared_memory_connect_request_error11308327
Ref: error_cr_shared_memory_connect_answer_error11308481
Ref: error_cr_shared_memory_connect_file_map_error11308633
Ref: error_cr_shared_memory_connect_map_error11308789
Ref: error_cr_shared_memory_file_map_error11308946
Ref: error_cr_shared_memory_map_error11309094
Ref: error_cr_shared_memory_event_error11309243
Ref: error_cr_shared_memory_connect_abandoned_error11309382
Ref: error_cr_shared_memory_connect_set_error11309517
Ref: error_cr_conn_unknow_protocol11309665
Ref: error_cr_invalid_conn_handle11309755
Ref: error_cr_secure_auth11309844
Ref: error_cr_fetch_canceled11310007
Ref: error_cr_no_data11310119
Ref: error_cr_no_stmt_metadata11310217
Ref: error_cr_no_result_set11310317
Ref: error_cr_not_implemented11310460
Ref: error_cr_server_lost_extended11310555
Ref: error_cr_stmt_closed11310677
Ref: error_cr_new_stmt_metadata11310799
Ref: error_cr_already_connected11311045
Ref: error_cr_auth_plugin_cannot_load11311188
Node: problems11311358
Node: what-is-crashing11312196
Node: common-errors11316473
Node: error-access-denied11318131
Node: can-not-connect-to-server11318525
Node: can-not-connect-to-server-on-windows11326444
Node: error-lost-connection11330195
Node: old-client11331970
Node: password-too-long11335174
Node: blocked-host11336095
Node: too-many-connections11337674
Node: out-of-memory11339623
Node: gone-away11340587
Node: packet-too-large11347656
Node: communication-errors11350208
Node: full-table11353221
Node: cannot-create11353976
Node: commands-out-of-sync11355492
Node: ignoring-user11356205
Node: cannot-find-table11357634
Node: cannot-initialize-character-set11358636
Node: not-enough-file-handles11360311
Node: table-corruption11363398
Node: installation-issues11364512
Node: file-permissions11364771
Node: administration-issues11366035
Node: resetting-permissions11366633
Node: resetting-permissions-windows11367620
Node: resetting-permissions-unix11370916
Node: resetting-permissions-generic11374350
Node: crashing11375904
Node: full-disk11384380
Node: temporary-files11386504
Node: problems-with-mysql-sock11389420
Node: timezone-problems11391642
Node: query-issues11392577
Node: case-sensitivity11393296
Node: using-date11397793
Node: problems-with-null11402335
Node: problems-with-alias11405718
Node: nontransactional-tables11407484
Node: deleting-from-related-tables11409330
Node: no-matching-rows11410080
Node: problems-with-float11412277
Node: optimizer-issues11416692
Node: table-definition-issues11418477
Node: alter-table-problems11418791
Node: temporary-table-problems11420754
Node: bugs11422033
Node: news11430875
Node: restrictions11432101
Node: stored-program-restrictions11433032
Ref: stored-routine-sql-restrictions11433835
Ref: stored-routines-function-restrictions11436003
Ref: stored-routines-trigger-restrictions11437787
Ref: stored-routine-name-conflicts11438724
Ref: stored-routines-replication-restrictions11439559
Ref: stored-routines-debugging-restrictions11439982
Ref: stored-routines-standard-restrictions11440063
Ref: stored-routines-event-restrictions11441627
Node: condition-handling-restrictions11445572
Node: cursor-restrictions11446097
Node: subquery-restrictions11448122
Node: view-restrictions11453236
Node: xa-restrictions11459272
Node: charset-restrictions11461553
Node: performance-schema-restrictions11463175
Node: pluggable-authentication-restrictions11464935
Node: limits11472981
Node: joins-limits11473571
Node: database-count-limit11473888
Node: table-size-limit11474459
Node: column-count-limit11479889
Node: limits-frm-file11485222
Node: limits-windows11487714
Node: glossary11492497

End Tag Table
